Tailoring stress in pyrolytic carbon for fabrication of nanomechanical string resonators

DEFF Research Database (Denmark)

Quang, Long Nguyen; Larsen, Peter Emil; Boisen, Anja

2018-01-01

In order to achieve high resonance frequencies and quality factors of pyrolytic carbon MEMS string resonators the resonator material needs to have a large tensile stress. In this study, the influence of pyrolysis temperature, dwell time and ramping rate on the residual stress in thin pyrolytic...... carbon films is investigated with the bending plate method. The results show that the pyrolysis temperature is the most important parameter for tailoring the residual stress, with a transition from tensile stress at temperature below 800ºC to compressive stress at temperatures above 800ºC. Two kinds...... of photoresist: positive (AZ5214E) and negative (SU-8) and different pyrolysis conditions are used to fabricate pyrolytic carbon string resonators at variable pyrolysis conditions. The best performance is obtained for devices with a length of 400 µm fabricated at a pyrolysis temperature of 700ºC, ramping rate...

Damage to the microbial cell membrane during pyrolytic sugar utilization and strategies for increasing resistance.

Science.gov (United States)

Jin, Tao; Rover, Marjorie R; Petersen, Elspeth M; Chi, Zhanyou; Smith, Ryan G; Brown, Robert C; Wen, Zhiyou; Jarboe, Laura R

2017-09-01

Lignocellulosic biomass is an appealing feedstock for the production of biorenewable fuels and chemicals, and thermochemical processing is a promising method for depolymerizing it into sugars. However, trace compounds in this pyrolytic sugar syrup are inhibitory to microbial biocatalysts. This study demonstrates that hydrophobic inhibitors damage the cell membrane of ethanologenic Escherichia coli KO11+lgk. Adaptive evolution was employed to identify design strategies for improving pyrolytic sugar tolerance and utilization. Characterization of the resulting evolved strain indicates that increased resistance to the membrane-damaging effects of the pyrolytic sugars can be attributed to a glutamine to leucine mutation at position 29 of carbon storage regulator CsrA. This single amino acid change is sufficient for decreasing EPS protein production and increasing membrane integrity when exposed to pyrolytic sugars.

Effects of deposited pyrolytic carbon on some mechanical properties of zircaloy-4 tubes. Vol. 3

Energy Technology Data Exchange (ETDEWEB)

Shrkawy, S W; Abdel-razek, I D; El-Sayed, H A [Metallurgy Department, Nuclear Research Center, Atomic Energy Authority, Cairo (Egypt)

1996-03-01

Zircaloy cladding tubes are not compatible with the uranium fuel pellets as they suffer from failure due to pelletclad interaction (PCI). A carbon coating, as used in the canadian CANLUB fuel elements, is thought to improve the cladding performance with respect to the PCI problem. In this paper pyrolytic carbon coating was deposited on zircaloy-4 cladding tubes by the thermal cracking of commercial butant gas at the temperature range 250-450 degree C. In order to evaluate the effect of gaseous species on the mechanical properties of the tubes tensile and microhardness testing measurements were performed on samples prepared from the coated tubes. The fractured surface of the tensile zircaloy tubes and the deposited carbon coating, both, were examined by the SEM. The results of the tensile tests of zircaloy-4 tubes indicated that the coating process has insignificant effect on the ultimate strength of the tubes tested. The values of Vickers hardness numbers were not significantly changed across the tubes thickness. The microstructure of deposited carbon, due to the cracking process, was granular in all the temperature range (250-450 degree C) studied. 9 figs., 1 tab.

On the fractography of overload, stress corrosion, and cyclic fatigue failures in pyrolytic-carbon materials used in prosthetic heart-valve devices.

Science.gov (United States)

Ritchie, R O; Dauskardt, R H; Pennisi, F J

1992-01-01

A scanning electron microscopy study is reported of the nature and morphology of fracture surfaces in pyrocarbons commonly used for the manufacture of mechanical heart-valve prostheses. Specifically, silicon-alloyed low-temperature-isotropic (LTI)-pyrolytic carbon is examined, both as a coating on graphite and as a monolithic material, following overload, stress corrosion (static fatigue), and cyclic fatigue failures in a simulated physiological environment of 37 degrees C Ringer's solution. It is found that, in contrast to most metallic materials yet in keeping with many ceramics, there are no distinct fracture morphologies in pyro-carbons which are characteristic of a specific mode of loading; fracture surfaces appear to be identical for both catastrophic and subcritical crack growth under either sustained or cyclic loading. We conclude that caution should be used in assigning the likely cause of failure of pyrolytic carbon heart-valve components using fractographic examination.

Sealing nuclear graphite with pyrolytic carbon

International Nuclear Information System (INIS)

Feng, Shanglei; Xu, Li; Li, Li; Bai, Shuo; Yang, Xinmei; Zhou, Xingtai

2013-01-01

Pyrolytic carbon (PyC) coatings were deposited on IG-110 nuclear graphite by thermal decomposition of methane at ∼1830 °C. The PyC coatings are anisotropic and airtight enough to protect IG-110 nuclear graphite against the permeation of molten fluoride salts and the diffusion of gases. The investigations indicate that the sealing nuclear graphite with PyC coating is a promising method for its application in Molten Salt Reactor (MSR)

Pyrolytic carbon coatings for nuclear fuels from commercial butane

International Nuclear Information System (INIS)

Abdelrazek, I.D.; Abdelhalim, A.S.

1976-01-01

Uranium dioxide and graphite semi-spherical particles (average diameter = 300 um) were coated with pyrolytic carbon at relatively low temperatures (800 to 1200 0 C). The spouting gas was a mixture of commercial butane and nitrogen. The hydrocarbon served as a source for carbon whereas nitrogenated as a diluent and a support for the bed. The total gas flow rate was 3.5 lit/min and the hydrocarbon content varied from 3 to 10%. Coating efficiencies ranging from 4 to 25 percent were obtained. The densities of the coatings varied from 1.25 g/cm 3 (which corresponds to coatings of laminar microstructures) and 1.82 g/cm 3 (which suggests the formation of isotropic coatings. Metallographic examination (using polarized light) of the pyrolytic carbon formed at the experimental conditions indicated the possibility of using the coatings for nuclear fuel applications

Improvement on the electrochemical characteristics of graphite anodes by coating of the pyrolytic carbon using tumbling chemical vapor deposition

International Nuclear Information System (INIS)

Han, Young-Soo; Lee, Jai-Young

2003-01-01

The electrochemical characteristics of graphite coated with pyrolytic carbon materials using tumbling chemical vapor deposition (CVD) process have been studied for the active material of anodes in lithium ion secondary batteries. Coating of pyrolytic carbons on the surface of graphite particles, which tumble in a rotating reactor tube, was performed through the pyrolysis of liquid propane gas (LPG). The surface morphology of these graphite particles coated with pyrolytic carbon has been observed with scanning electron microscopy (SEM). The surface of graphite particles can well be covered with pyrolytic carbon by tumbling CVD. High-resolution transmission electron microscopy (HRTEM) image of these carbon particles shows that the core part is highly ordered carbon, while the shell part is disordered carbon. We have found that the new-type carbon obtained from tumbling CVD has a uniform core (graphite)-shell (pyrolytic carbon) structure. The electrochemical property of the new-type carbons has been examined using a charge-discharge cycler. The coating of pyrolytic carbon on the surface of graphite can effectively reduce the initial irreversible capacity by 47.5%. Cyclability and rate-capability of theses carbons with the core-shell structure are much better than those of bare graphite. From electrochemical impedance spectroscopy (EIS) spectra, it is found that the coating of pyrolytic carbon on the surface of graphite causes the decrease of the contact resistance in the carbon electrodes, which means the formation of solid electrolyte interface (SEI) layer is suppressed. We suggest that coating of pyrolytic carbon by the tumbling CVD is an effective method in improving the electrochemical properties of graphite electrodes for lithium ion secondary batteries

Process for the fabrication of aluminum metallized pyrolytic graphite sputtering targets

Science.gov (United States)

Makowiecki, Daniel M.; Ramsey, Philip B.; Juntz, Robert S.

1995-01-01

An improved method for fabricating pyrolytic graphite sputtering targets with superior heat transfer ability, longer life, and maximum energy transmission. Anisotropic pyrolytic graphite is contoured and/or segmented to match the erosion profile of the sputter target and then oriented such that the graphite's high thermal conductivity planes are in maximum contact with a thermally conductive metal backing. The graphite contact surface is metallized, using high rate physical vapor deposition (HRPVD), with an aluminum coating and the thermally conductive metal backing is joined to the metallized graphite target by one of four low-temperature bonding methods; liquid-metal casting, powder metallurgy compaction, eutectic brazing, and laser welding.

A study on pyrolytic gasification of coffee grounds and implications to allothermal gasification

Energy Technology Data Exchange (ETDEWEB)

Masek, Ondrej; Konno, Miki; Hosokai, Sou; Sonoyama, Nozomu; Norinaga, Koyo; Hayashi, Jun-ichiro [Centre for Advanced Research of Energy Conversion Materials, Hokkaido University, N13-W8, Kita-ku, Sapporo 060-8628 (Japan)

2008-01-15

The increasing interest in biomass, as a renewable source of energy, is stimulating a search for suitable biomass resources as well as the development of technologies for their effective utilization. This work concentrated on characteristics of processes occurring during pyrolytic gasification of upgraded food industry residues, namely residue from industrial production of liquid coffee, and assessed its suitability for conversion in an allothermal gasifier. The influence of several operating parameters on product composition was examined with three different laboratory-scale reactors, studying the primary pyrolysis and secondary pyrolysis of nascent volatiles, and the steam gasification of char. The experimental results show that a high degree of conversion of UCG into volatiles and gases (up to 88% C-basis) can be achieved by fast pyrolysis even at temperatures as low as 1073 K. In addition, the degree of conversion is not influenced by the presence or concentration of steam, which is an important factor in allothermal gasification. Mathematical simulation of an allothermal gasifier showed that net cold-gas efficiency as high as 86% can be reached. (author)

A study on pyrolytic gasification of coffee grounds and implications to allothermal gasification

International Nuclear Information System (INIS)

Masek, Ondrej; Konno, Miki; Hosokai, Sou; Sonoyama, Nozomu; Norinaga, Koyo; Hayashi, Jun-ichiro

2008-01-01

The increasing interest in biomass, as a renewable source of energy, is stimulating a search for suitable biomass resources as well as the development of technologies for their effective utilization. This work concentrated on characteristics of processes occurring during pyrolytic gasification of upgraded food industry residues, namely residue from industrial production of liquid coffee, and assessed its suitability for conversion in an allothermal gasifier. The influence of several operating parameters on product composition was examined with three different laboratory-scale reactors, studying the primary pyrolysis and secondary pyrolysis of nascent volatiles, and the steam gasification of char. The experimental results show that a high degree of conversion of UCG into volatiles and gases (up to 88% C-basis) can be achieved by fast pyrolysis even at temperatures as low as 1073 K. In addition, the degree of conversion is not influenced by the presence or concentration of steam, which is an important factor in allothermal gasification. Mathematical simulation of an allothermal gasifier showed that net cold-gas efficiency as high as 86% can be reached

Pyrolytic carbon membranes containing silica: morphological approach on gas transport behavior

Science.gov (United States)

Park, Ho Bum; Lee, Sun Yong; Lee, Young Moo

2005-04-01

Pyrolytic carbon membrane containing silica (C-SiO 2) is a new-class material for gas separation, and in the present work we will deal with it in view of the morphological changes arising from the difference in the molecular structure of the polymeric precursors. The silica embedded carbon membranes were fabricated by a predetermined pyrolysis step using imide-siloxane copolymers (PISs) that was synthesized from benzophenone tetracarboxylic dianhydrides (BTDA), 4,4'-oxydianiline (ODA), and amine-terminated polydimethylsiloxane (PDMS). To induce different morphologies at the same chemical composition, the copolymers were prepared using one-step (preferentially a random segmented copolymer) sand two-step polymerization (a block segmented copolymer) methods. The polymeric precursors and their pyrolytic C-SiO 2 membranes were analyzed using thermal analysis, atomic force microscopy, and transmission electron microscopy, etc. It was found that the C-SiO 2 membrane derived from the random PIS copolymer showed a micro-structure containing small well-dispersed silica domains, whereas the C-SiO 2 membrane from the block PIS copolymer exhibited a micro-structure containing large silica domains in the continuous carbon matrix. Eventually, the gas transport through these C-SiO 2 membranes was significantly affected by the morphological changes of the polymeric precursors.

Ellipsometric investigations of pyrolytically deposited thin indium oxide films

International Nuclear Information System (INIS)

Winkler, U.

1980-01-01

Ellipsometric measurements have been carried out of thin indium oxide films deposited pyrolytically on glass substrates. It was found that the roughness of the films affected the measuring results. Therefore, only after applying a two-layer model a reasonable interpretation of the measuring results became possible

Nanomechanical Pyrolytic Carbon Resonators: Novel Fabrication Method and Characterization of Mechanical Properties

Directory of Open Access Journals (Sweden)

Maksymilian Kurek

2016-07-01

Full Text Available Micro- and nanomechanical string resonators, which essentially are highly stressed bridges, are of particular interest for micro- and nanomechanical sensing because they exhibit resonant behavior with exceptionally high quality factors. Here, we fabricated and characterized nanomechanical pyrolytic carbon resonators (strings and cantilevers obtained through pyrolysis of photoresist precursors. The developed fabrication process consists of only three processing steps: photolithography, dry etching and pyrolysis. Two different fabrication strategies with two different photoresists, namely SU-8 2005 (negative and AZ 5214e (positive, were compared. The resonant behavior of the pyrolytic resonators was characterized at room temperature and in high vacuum using a laser Doppler vibrometer. The experimental data was used to estimate the Young’s modulus of pyrolytic carbon and the tensile stress in the string resonators. The Young’s moduli were calculated to be 74 ± 8 GPa with SU-8 and 115 ± 8 GPa with AZ 5214e as the precursor. The tensile stress in the string resonators was 33 ± 7 MPa with AZ 5214e as the precursor. The string resonators displayed maximal quality factor values of up to 3000 for 525-µm-long structures.

Experimental investigation of linear thermal expansion of pyrolytic graphite at high temperatures

Science.gov (United States)

Senchenko, V. N.; Belikov, R. S.

2017-11-01

Using the previously described [1] experimental setup for investigation of the thermophysical properties of refractory materials under high pressure and temperature a few experiments with pyrolytic graphite were carried out. The density of the material was equal to 2.18 g/cm3. Experimental data on the linear thermal expansion in the perpendicular and parallel to the basal plane direction were obtained. Thermal expansion in the perpendicular to the basal plane direction during the heating from room temperature up to the melting point was 16.4 ± 1.6%. The results obtained allow calculating the density of pyrolytic graphite in the wide range of high temperatures up to the melting point.

Overliming detoxification of pyrolytic sugar syrup for direct fermentation of levoglucosan to ethanol.

Science.gov (United States)

Chi, Zhanyou; Rover, Marjorie; Jun, Erin; Deaton, Mark; Johnston, Patrick; Brown, Robert C; Wen, Zhiyou; Jarboe, Laura R

2013-12-01

The application of pyrolytic sugars for biofuel production through fermentation is challenged by inhibitory contaminant compounds. Inhibition is so severe that only 0.25% sugar syrup can be used. In this study, overliming was tested as a simple detoxification method, using the Escherichia coli KO11+ lgk to directly convert levoglucosan into ethanol. After treatment with at least 14.8 g/L of Ca(OH)2, fermentation with 2% (w/v) pyrolytic sugar syrup was observed with no inhibition of ethanol production. Further investigation of treatment time and temperature showed that 8-16 h of treatment at 20°C, and 1-4 h of treatment at 60°C are necessary to obtain consistent ethanol production. The samples treated with 18.5 g/L Ca(OH)2 at 60°C for 4 h showed no inhibition at 2.5%. Multiple contaminants removed by the overliming treatment were identified. This study demonstrates that overliming is a promising method for detoxification of pyrolytic sugars for fermentation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Low-temperature preparation of pyrolytic carbon

International Nuclear Information System (INIS)

Kidd, R.W.; Seifert, D.A.; Browning, M.F.

1984-01-01

Previous studies have demonstrated that nuclear waste forms coated with chemical vapor deposited pyrolytic carbon (PyC) at about 1273 K can provide ground water leach protection. To minimize the release during coating of volatile material from the waste forms and permit the coating of waste forms with a low softening point, a study was initiated to develop parameters for the catalytic deposition of PyC at low temperatures. The parameters surveyed in a fluidized-bed coater were deposition temperatures, carbon precursors, catalyst, diluent gas, concentration, and pressure

Study of composite MWCNT/pyrolytic Cr interface by NEXAFS spectroscopy

International Nuclear Information System (INIS)

Petrova, O V; Nekipelov, S V; Mingaleva, A E; Sivkov, V N; Obiedkov, A M; Kaverin, B S; Kremlev, K V; Ketkov, S Yu; Gusev, S A; Vyalikh, D V; Molodtsov, S L

2016-01-01

A composite material based on MWCNT covered by pyrolytic Cr has been prepared by MOCVD growth technique using bis(arene)chromium compounds as the pyrolytic Cr source. Their structures and morphologies were preliminary studied by X-ray diffraction and scanning and scanning electron microscopy. The atomic and chemical composition of the interface, MWCNT surface and Cr-coating of the composite were studied by total electron yield mode in the range NEXAFS C1s - and Cr2p - absorption edge with use of synchrotron radiation of RGBL at BESSY-II. The study has shown that top layers of the MWCNT in composite have no essential destruction, the coating of the MWCNT surfaces is continuous and consists of Cr 2 O 3 . The chromium oxide adhesion is provided by chemical binding between the carbon atoms of the MWCNT top layer and the oxygen atoms of the coating. (paper)

Using pyrolytic acid leaching as a pretreatment step in a biomass fast pyrolysis plant: process design and economic evaluation

NARCIS (Netherlands)

Oudenhoven, Stijn; van der Ham, Aloysius G.J.; van den Berg, Henderikus; Westerhof, Roel Johannes Maria; Kersten, Sascha R.A.

2016-01-01

Removing alkali and alkaline earth metals (AAEMs) from biomass, with pyrolytic acids, before pyrolysis leads to increased organic oil and sugar yields. These pyrolytic acids are produced and concentrated within the pyrolysis process itself. The purpose of this paper was to evaluate under which

Bio-compatibility of the surface layer of pyrolytic graphite

Czech Academy of Sciences Publication Activity Database

Starý, V.; Bačáková, Lucie; Horník, J.; Chmelík, V.

2003-01-01

Roč. 433, 1-2 (2003), s. 191-198 ISSN 0040-6090 R&D Projects: GA ČR GA106/99/0626; GA MŠk OC 527.130 Institutional research plan: CEZ:AV0Z5011922; CEZ:MSM 210000012 Keywords : carbon-carbon composite * pyrolytic graphite * cell adhesion Subject RIV: JI - Composite Materials Impact factor: 1.598, year: 2003

Cathode deposits in fullerene formation — microstructural evidence for independent pathways of pyrolytic carbon and nanobody formation

Science.gov (United States)

Taylor, G. H.; Gerald, J. D. Fitz; Pang, L.; Wilson, M. A.

1994-01-01

Microstructures in cathode deposits formed during fullerene production by electrical arcing in helium have been examined in detail. This has provided new information about the mechanisms by which nanobodies (nanotubes and nanoparticles) and pyrolytic carbon are deposited. Nanobodies and pyrolytic carbon form independently; the former probably grow in the plasma then deposit on the electrode but much of the latter deposits directly on the electrode surface.

London forces in highly oriented pyrolytic graphite

Directory of Open Access Journals (Sweden)

L.V. Poperenko

2017-07-01

Full Text Available Surface of highly oriented pyrolytic graphite with terrace steps was studied using scanning tunneling microscopy with high spatial resolution. Spots with positive and negative charges were found in the vicinity of the steps. Values of the charges depended both on the microscope needle scan velocity and on its motion direction. The observed effect was theoretically explained with account of London forces that arise between the needle tip and the graphite surface. In this scheme, a terrace step works as a nanoscale diode for surface electric currents.

Interaction of noble-metal fission products with pyrolytic silicon carbide

International Nuclear Information System (INIS)

Lauf, R.J.; Braski, D.N.

1982-01-01

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain layers of pyrolytic carbon and silicon carbide, which act as a miniature pressure vessel and form the primary fission product barrier. Of the many fission products formed during irradiation, the noble metals are of particular interest because they interact significantly with the SiC layer and their concentrations are somewhat higher in the low-enriched uranium fuels currently under consideration. To study fission product-SiC interactions, particles of UO 2 or UC 2 are doped with fission product elements before coating and are then held in a thermal gradient up to several thousand hours. Examination of the SiC coatings by TEM-AEM after annealing shows that silver behaves differently from the palladium group

Huge magnetoresistance effect of highly oriented pyrolytic graphite

International Nuclear Information System (INIS)

Du Youwei; Wang Zhiming; Ni Gang; Xing Dingyu; Xu Qingyu

2004-01-01

Graphite is a quasi-two-dimensional semimetal. However, for usual graphite the magnetoresistance is not so high due to its small crystal size and no preferred orientation. Huge positive magnetoresistance up to 85300% at 4.2 K and 4950% at 300 K under 8.15 T magnetic field was found in highly oriented pyrolytic graphite. The mechanism of huge positive magnetoresistance is not only due to ordinary magnetoresistance but also due to magnetic-field-driven semimetal-insulator transition

Effect of substrate temperature on the properties of pyrolytically deposited nitrogen-doped zinc oxide thin films

Energy Technology Data Exchange (ETDEWEB)

Golshahi, S., E-mail: golshahi@iaurasht.ac.ir [Department of Physics, Rasht Branch, Islamic Azad University, Rasht (Iran, Islamic Republic of); Rozati, S.M. [Department of Physics, University of Guilan, 41335-1914 Rasht (Iran, Islamic Republic of); Botelho do Rego, A.M. [Centro de Quimica-Fisica Molecular and IN, Technical University of Lisbon, IST 1049-001 Lisboa (Portugal); Wang, J. [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Elangovan, E.; Martins, R.; Fortunato, E. [CENIMAT/I3N, Departamento de Ciencia dos Materiais, Faculdade de Ciencias e Tecnologia, FCT, Universidade Nova de Lisboa (UNL), 2829-516 Caparica (Portugal)

2013-01-01

Highlights: Black-Right-Pointing-Pointer Hall-effect measurement introduces the optimum temperature of 450 Degree-Sign C for fabricating p-type high quality ZnO films. Black-Right-Pointing-Pointer X-ray photoelectron spectroscopy (XPS) proved the nitrogen presence at the surface of doped ZnO thin films at all substrate temperatures. Black-Right-Pointing-Pointer Films prepared at lower substrate temperature (300 Degree-Sign C and 350 Degree-Sign C) own wider band gaps. Black-Right-Pointing-Pointer Surface roughness strongly is affected by substrate temperature variations. - Abstract: The effect of substrate temperature (T{sub s}) on the properties of pyrolytically deposited nitrogen (N) doped zinc oxide (ZnO) thin films was investigated. The T{sub s} was varied from 300 Degree-Sign C to 500 Degree-Sign C, with a step of 50 Degree-Sign C. The positive sign of Hall coefficient confirmed the p-type conductivity in the films deposited at 450 Degree-Sign C and 500 Degree-Sign C. X-ray diffraction studies confirmed the ZnO structure with a dominant peak from (1 0 0) crystal plane, irrespective of the variation in T{sub s}. The presence of N in the ZnO structure was evidenced through X-ray photoelectron spectroscopy (XPS) analysis. The obtained high N concentration reveals that the 450 Degree-Sign C is the optimal T{sub s}. Atomic force microscope (AFM) analysis showed that the surface roughness was increased with the increasing T{sub s} until 400 Degree-Sign C but then decreased. It is found that the transmittance of the deposited films is increased with the increasing T{sub s}. The optical band gap calculated from the absorption edge showed that the films deposited with T{sub s} of 300 Degree-Sign C and 350 Degree-Sign C possess higher values than those deposited at higher T{sub s}.

Pyrolysis of de-oiled seed cake of Jatropha Curcas and catalytic steam reforming of pyrolytic bio-oil to hydrogen.

Science.gov (United States)

Renny, Andrew; Santhosh, Viswanathan; Somkuwar, Nitin; Gokak, D T; Sharma, Pankaj; Bhargava, Sanjay

2016-11-01

The aim of this work was to study the pyrolysis of de-oiled seed cake of Jatropha Curcas and catalytic steam reforming of pyrolytic bio-oil to hydrogen. As per literature, presence of heavy nitrogenous and oxygenated compounds leads to catalyst deactivation. Here, an attempt has been made to tune pyrolytic reactions to optimize the N and O content of the pyrolytic bio-oil. Bio-oil conversion and hydrogen yield decreased as reaction progressed, which attributes to temporary loss of catalytic activity by blockage of catalyst pores by carbon deposition. Further, retention of steam reforming activity after repetitive steam activation suggests long-term catalyst usage. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mechanical performance of pyrolytic carbon in prosthetic heart valve applications.

Science.gov (United States)

Cao, H

1996-06-01

An experimental procedure has been developed for rigorous characterization of the fracture resistance and fatigue crack extension in pyrolytic carbon for prosthetic heart valve application. Experiments were conducted under sustained and cyclic loading in a simulated biological environment using Carbomedics Pyrolite carbon. While the material was shown to have modest fracture toughness, it exhibited excellent resistance to subcritical crack growth. The crack growth kinetics in pyrolytic carbon were formulated using a phenomenological description. A fatigue threshold was observed below which the crack growth rate diminishes. A damage tolerance concept based on fracture mechanics was used to develop an engineering design approach for mechanical heart valve prostheses. In particular, a new quantity, referred to as the safe-life index, was introduced to assess the design adequacy against subcritical crack growth in brittle materials. In addition, a weakest-link statistical description of the fracture strength is provided and used in the design of component proof-tests. It is shown that the structural reliability of mechanical heart valves can be assured by combining effective flaw detection and manufacturing quality control with adequate damage tolerance design.

Role of oxygen-containing functional groups in forest fire-generated and pyrolytic chars for immobilization of copper and nickel.

Science.gov (United States)

Esfandbod, Maryam; Merritt, Christopher R; Rashti, Mehran Rezaei; Singh, Balwant; Boyd, Sue E; Srivastava, Prashant; Brown, Christopher L; Butler, Orpheus M; Kookana, Rai S; Chen, Chengrong

2017-01-01

Char as a carbon-rich material, can be produced under pyrolytic conditions, wildfires or prescribed burn offs for fire management. The objective of this study was to elucidate mechanistic interactions of copper (Cu 2+ ) and nickel (Ni 2+ ) with different chars produced by pyrolysis (green waste, GW; blue-Mallee, BM) and forest fires (fresh-burnt by prescribed fire, FC; aged char produced by wild fire, AC). The pyrolytic chars were more effective sorbents of Cu 2+ (∼11 times) and Ni 2+ (∼5 times) compared with the forest fire chars. Both cross-polarization (CPMAS-NMR) and Bloch decay (BDMAS-NMR) 13 C NMR spectroscopies showed that forest fire chars have higher woody components (aromatic functional groups) and lower polar groups (e.g. O-alkyl C) compared with the pyrolytic chars. The polarity index was greater in the pyrolytic chars (0.99-1.34) than in the fire-generated chars (0.98-1.15), while aromaticity was lower in the former than in the latter. Fourier transform infrared (FTIR) and Raman spectroscopies indicated the binding of carbonate and phosphate with both Cu 2+ and Ni 2+ in all chars, but with a greater extent in pyrolytic than forest fire-generated chars. These findings have demonstrated the key role of char's oxygen-containing functional groups in determining their sorption capacity for the Cu 2+ and Ni 2+ in contaminated lands. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pyrolytic carbon coating for cytocompatibility of titanium oxide nanoparticles: a promising candidate for medical applications

International Nuclear Information System (INIS)

Behzadi, Shahed; Simchi, Abdolreza; Imani, Mohammad; Yousefi, Mohammad; Galinetto, Pietro; Amiri, Houshang; Stroeve, Pieter; Mahmoudi, Morteza

2012-01-01

Nanoparticles for biomedical use must be cytocompatible with the biological environment that they are exposed to. Current research has focused on the surface functionalization of nanoparticles by using proteins, polymers, thiols and other organic compounds. Here we show that inorganic nanoparticles such as titanium oxide can be coated by pyrolytic carbon (PyC) and that the coating has cytocompatible properties. Pyrolization and condensation of methane formed a thin layer of pyrolytic carbon on the titanium oxide core. The formation of the PyC shell retards coalescence and sintering of the ceramic phase. Our MTT assay shows that the PyC-coated particles are cytocompatible at employed doses. (paper)

Contribution to the study of hard, low-density pyrolytic carbons

International Nuclear Information System (INIS)

Boutin, F.R.

1966-06-01

Apparent contradictions in the properties of pyrolytic carbons obtained at 1600 deg C (hardness and graphitization) are studied. It is shown that structure of the deposit is turbostratic with high internal stresses (δ -2 ), and it graphitizes (by thermal treatment over 2000 deg C) in a similar manner to graphitisable carbon. Because the deposit forms lamellar compounds, it is presumed that the structure is similar to that of graphitisable carbon. Since it is not structure dependant, the hardness originates from the 'growth texture' and is not comparable with the hardness of a non-graphitisable carbon. The pyrolytic carbon studied is composed of regions, on the overage a few microns across, formed by the stacking of small carbon platelets, interlocked and showing a preferred orientation. The mis-orientation of the various regions produces general disorientation. We estimate that the introduction of the particles of some material such as thermal black which are observed in the electron microscope are responsible for the mis-orientation. The density and hardness of the deposit are a result of the interlocking of platelets, which creates a closed porosity and prevents any sliding of the atomic planes. (author) [fr

Decomposition mechanism of melamine borate in pyrolytic and thermo-oxidative conditions

Energy Technology Data Exchange (ETDEWEB)

Hoffendahl, Carmen; Duquesne, Sophie; Fontaine, Gaëlle; Bourbigot, Serge, E-mail: serge.bourbigot@ensc-lille.fr

2014-08-20

Highlights: • Decomposition of melamine borate in pyrolytic and thermo-oxidative conditions was investigated. • With increasing temperature, orthoboric acid forms boron oxide releasing water. • Melamine decomposes evolving melamine, ammonia and other fragments. • Boron oxide is transformed into boron nitride and boron nitride-oxide structures through presence of ammonia. - Abstract: Decomposition mechanism of melamine borate (MB) in pyrolytic and thermo-oxidative conditions is investigated in the condensed and gas phases using solid state NMR ({sup 13}C and {sup 11}B), X-ray photoelectron spectroscopy (XPS), pyrolysis-gas chromatography–mass spectrometry (py-GCMS) and thermogravimetric analysis coupled with a Fourier transform infrared spectrometer (TGA–FTIR). It is evidenced that orthoboric acid dehydrates to metaboric and then to boron oxide. The melamine is partially sublimated. At the same time, melamine condensates, i.e., melem and melon are formed. Melon is only formed in thermo-oxidative conditions. At higher temperature, melem and melon decompose releasing ammonia which reacts with the boron oxide to form boron nitride (BN) and BNO structures.

Separation, hydrolysis and fermentation of pyrolytic sugars to produce ethanol and lipids.

Science.gov (United States)

Lian, Jieni; Chen, Shulin; Zhou, Shuai; Wang, Zhouhong; O'Fallon, James; Li, Chun-Zhu; Garcia-Perez, Manuel

2010-12-01

This paper describes a new scheme to convert anhydrosugars found in pyrolysis oils into ethanol and lipids. Pyrolytic sugars were separated from phenols by solvent extraction and were hydrolyzed into glucose using sulfuric acid as a catalyst. Toxicological studies showed that phenols and acids were the main species inhibiting growth of the yeast Saccharomyces cerevisiae. The sulfuric acids, and carboxylic acids from the bio-oils, were neutralized with Ba(OH)(2). The phase rich in sugar was further detoxified with activated carbon. The resulting aqueous phase rich in glucose was fermented with three different yeasts: S. cerevisiae to produce ethanol, and Cryptococcus curvatus and Rhodotorula glutinis to produce lipids. Yields as high as 0.473 g ethanol/g glucose and 0.167 g lipids/g sugar (0.266 g ethanol equivalent/g sugar), were obtained. These results confirm that pyrolytic sugar fermentation to produce ethanol is more efficient than for lipid production. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

A pseudo-curved oriented pyrolytic graphite neutron monochromator

International Nuclear Information System (INIS)

Ettedgui, H.; Gurewitz, E.; Pinto, H.

1979-03-01

A pseudo-curved neutron monochromator with a continuously variable curvature was constructed with four flat pieces of oriented pyrolytic graphite (OPG). Curvatures which yield maximum diffracted intensities were determined for neutrons of wavelengths 1 A and 2.4 A. The increase of the intensity relatively to that of a flat monochromator is by a factor of 2 and 1.5, for 1 A and 2.4 A, respectively. The neutron flux at three positions along the neutron path was determined by gold foils activation and compared with the flux from flat monochromators of OPG and copper

Mesoscopic self-organization of a self-assembled supramolecular rectangle on highly oriented pyrolytic graphite and Au(111) surfaces.

Science.gov (United States)

Gong, Jian-Ru; Wan, Li-Jun; Yuan, Qun-Hui; Bai, Chun-Li; Jude, Hershel; Stang, Peter J

2005-01-25

A self-assembled supramolecular metallacyclic rectangle was investigated with scanning tunneling microscopy on highly oriented pyrolytic graphite and Au(111) surfaces. The rectangles spontaneously adsorb on both surfaces and self-organize into well ordered adlayers. On highly oriented pyrolytic graphite, the long edge of the rectangle stands on the surface, forming a 2D molecular network. In contrast, the face of the rectangle lays flat on the Au(111) surface, forming linear chains. The structures and intramolecular features obtained through high-resolution scanning tunneling microscopy imaging are discussed.

Influence of Cu(NO32 initiation additive in two-stage mode conditions of coal pyrolytic decomposition

Directory of Open Access Journals (Sweden)

Larionov Kirill

2017-01-01

Full Text Available Two-stage process (pyrolysis and oxidation of brown coal sample with Cu(NO32 additive pyrolytic decomposition was studied. Additive was introduced by using capillary wetness impregnation method with 5% mass concentration. Sample reactivity was studied by thermogravimetric analysis with staged gaseous medium supply (argon and air at heating rate 10 °C/min and intermediate isothermal soaking. The initiative additive introduction was found to significantly reduce volatile release temperature and accelerate thermal decomposition of sample. Mass-spectral analysis results reveal that significant difference in process characteristics is connected to volatile matter release stage which is initiated by nitrous oxide produced during copper nitrate decomposition.

CVD mechanism of pyrolytic boron nitride

International Nuclear Information System (INIS)

Tanji, H.; Monden, K.; Ide, M.

1987-01-01

Pyrolytic boron nitride (P-BN) has become a essential material for III-V compound semiconductor manufacturing process. As the demand from electronics industry for larger single crystals increases, the demand for larger and more economical P-BN components is growing rapidly. P-BN is manufactured by low pressure CVD using boron-trihalides and ammonia as the reactants. In spite that P-BN has been in the market for quite a long time, limited number of fundamental studies regarding the kinetics and the formation mechanism of P-BN have been reported. As it has been demonstrated in CVD of Si, knowledge and both theoretical and empirical modeling of CVD process can be applied to improve the deposition technology and to give more uniform deposition with higher efficiency, and it should also apply to the deposition of P-BN

Erosion of pyrolytic graphite and Ti-doped graphite due to high flux irradiation

International Nuclear Information System (INIS)

Ohtsuka, Yusuke; Ohashi, Junpei; Ueda, Yoshio; Isobe, Michiro; Nishikawa, Masahiro

1997-01-01

The erosion of pyrolytic graphite and titanium doped graphite RG-Ti above 1,780 K was investigated by 5 keV Ar beam irradiation with the flux from 4x10 19 to 1x10 21 m -2 ·s -1 . The total erosion yields were significantly reduced with the flux. This reduction would be attributed to the reduction of RES (radiation enhanced sublimation) yield, which was observed in the case of isotropic graphite with the flux dependence of RES yield of φ -0.26 (φ: flux) obtained in our previous work. The yield of pyrolytic graphite was roughly 30% higher than that of isotropic graphite below the flux of 10 20 m -2 ·s -1 whereas each yield approached to very close value at the highest flux of 1x10 21 m -2 ·s -1 . This result indicated that the effect of graphite structure on the RES yield, which was apparent in the low flux region, would disappear in the high flux region probably due to the disordering of crystal structure. In the case of irradiation to RG-Ti at 1,780 K, the surface undulations evolved with a mean height of about 3 μm at 1.2x10 20 m -2 ·s -1 , while at higher flux of 8.0x10 20 m -2 ·s -1 they were unrecognizable. These phenomena can be explained by the reduction of RES of graphite parts excluding TiC grains. (author)

Nitrite electrochemical sensor based on prussian blue/single-walled carbon nanotubes modified pyrolytic graphite electrode

CSIR Research Space (South Africa)

Adekunle, AS

2011-09-01

Full Text Available Nitrite, NO2- (in neutral), and NO (in acidic media) were used as analytical probe to investigate the electrocatalytic properties of Prussian blue nanoparticles (PB) modified edge plane pyrolytic graphite (EPPG) electrode. Results indicate...

Electron-impact and pyrolytic eliminations from 4-tert-butylcyclohexyl xanthates

International Nuclear Information System (INIS)

Eadon, G.; Jefson, M.

1976-01-01

The stereochemistry of electron--impact induced xanthic acid elimination reactions was assessed by mass spectrographic studies of cis and trans deuterated 4-tert-butylcyclohexyl xanthates and their derivatives. Cis elimination was observed to be about 30 times as facile as trans elimination in the axial xanthate reaction. In the equatorial ester derivative reactions, the cis elimination was found to be slightly preferred. The electron-impact induced elimination results were compared with pyrolytic elimination results for the xanthates; and similar stereochemistry was observed for each type of elimination

Clinical Significance of the Degree of Fatty Liver Diagnosed by Ultrasonography

International Nuclear Information System (INIS)

Kim, Yong Kyun

2008-01-01

Fatty liver is one of the most commonly found disease by abdominal ultrasonography. The status of fatty liver is classified into mild, moderate and severe degrees. The study was conducted to investigate the clinical significance of fatty liver using ultrasonography. Test set consisted of 2,185 patients who visited D healthcare center in Daejeon to receive an abdominal ultrasonic test from January to December 2007. Out of the 2185 patients, 524 patients was diagnosed as fatty liver (290 male and 234 female patients). They were divided into three groups, group I for mild degree. II for moderate degree, and III for severe degree, depending on the echo of liver parenchyma, the sound attenuation, and the visibility of intrahepatic blood vessels and diaphragm. Then the correlation of obesity indices, liver function tests and metabolic syndrome was analyzed for males and females separately. As for the degree of fatty liver, 350 cases (66.8%) were classified as group I, 153 cases (29.2%) as group II, and 21 cases (4.1%) as group III. In addition, severe degree of fatty liver was more frequently found in males than in females. The mean ages of three groups for males were 46.1, 44.5, and 39.1, and those for females were 48.8, 50.2, 52.4, respectively. Males with lower mean ages have severely of fatty liver for both males and females. The results in this study show that the classification into three degrees of fatty liver in ultrasonography practice is helpful to treat and observe the progress of fatty liver. In addition, careful examination is required to measure the severity of fatty liver as well as detection of it. A standardized method to classify the degree of fatty liver is also needed for more objective measurement.

Pyrolytic conversion of plastic and rubber waste to hydrocarbons with basic salt catalysts

Science.gov (United States)

Wingfield, Jr., Robert C.; Braslaw, Jacob; Gealer, Roy L.

1985-01-01

The invention relates to a process for improving the pyrolytic conversion of waste selected from rubber and plastic to low molecular weight olefinic materials by employing basis salt catalysts in the waste mixture. The salts comprise alkali or alkaline earth compounds, particularly sodium carbonate, in an amount of greater than about 1 weight percent based on the waste feed.

Cyclic fatigue-crack propagation, stress-corrosion, and fracture-toughness behavior in pyrolytic carbon-coated graphite for prosthetic heart valve applications.

Science.gov (United States)

Ritchie, R O; Dauskardt, R H; Yu, W K; Brendzel, A M

1990-02-01

Fracture-mechanics tests were performed to characterize the cyclic fatigue, stress-corrosion cracking, and fracture-toughness behavior of a pyrolytic carbon-coated graphite composite material used in the manufacture of cardiac valve prostheses. Testing was carried out using compact tension C(T) samples containing "atomically" sharp precracks, both in room-temperature air and principally in a simulated physiological environment of 37 degrees C Ringer's lactate solution. Under sustained (monotonic) loads, the composite exhibited resistance-curve behavior, with a fracture toughness (KIc) between 1.1 and 1.9 MPa square root of m, and subcritical stress-corrosion crack velocities (da/dt) which were a function of the stress intensity K raised to the 74th power (over the range approximately 10(-9) to over 10(-5) m/s). More importantly, contrary to common perception, under cyclic loading conditions the composite was found to display true (cyclic) fatigue failure in both environments; fatigue-crack growth rates (da/dN) were seen to be a function of the 19th power of the stress-intensity range delta K (over the range approximately 10(-11) to over 10(-8) m/cycle). As subcritical crack velocities under cyclic loading were found to be many orders of magnitude faster than those measured under equivalent monotonic loads and to occur at typically 45% lower stress-intensity levels, cyclic fatigue in pyrolytic carbon-coated graphite is reasoned to be a vital consideration in the design and life-prediction procedures of prosthetic devices manufactured from this material.

Pyrolytic Carbon Nanosheets for Ultrafast and Ultrastable Sodium-Ion Storage.

Science.gov (United States)

Cho, Se Youn; Kang, Minjee; Choi, Jaewon; Lee, Min Eui; Yoon, Hyeon Ji; Kim, Hae Jin; Leal, Cecilia; Lee, Sungho; Jin, Hyoung-Joon; Yun, Young Soo

2018-04-01

Na-ion cointercalation in the graphite host structure in a glyme-based electrolyte represents a new possibility for using carbon-based materials (CMs) as anodes for Na-ion storage. However, local microstructures and nanoscale morphological features in CMs affect their electrochemical performances; they require intensive studies to achieve high levels of Na-ion storage performances. Here, pyrolytic carbon nanosheets (PCNs) composed of multitudinous graphitic nanocrystals are prepared from renewable bioresources by heating. In particular, PCN-2800 prepared by heating at 2800 °C has a distinctive sp 2 carbon bonding nature, crystalline domain size of ≈44.2 Å, and high electrical conductivity of ≈320 S cm -1 , presenting significantly high rate capability at 600 C (60 A g -1 ) and stable cycling behaviors over 40 000 cycles as an anode for Na-ion storage. The results of this study show the unusual graphitization behaviors of a char-type carbon precursor and exceptionally high rate and cycling performances of the resulting graphitic material, PCN-2800, even surpassing those of supercapacitors. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reflectivity and filtering characteristics of pyrolytic graphite

International Nuclear Information System (INIS)

Adib, M.; Abdel-Kawy, A.; Ashry, A.; Abbas, Y.; Wahba, W.

1988-01-01

The neutron transmission measurements through oriented pyrolytic graphite (P.G. crystal) were carried out in the wavelength band from 0.15 nm to 6.5 nm at different orientations of the (002) plane of the crystal w.r.t. the neutron beam direction. It was found that the P.G. crystal may be tuned for optimum scattering of second-order neutrons in the wavelength ranging between 0.112 nm and 0.425 nm, by adjusting the filter in an appropriate orientation. The reflectivity of (002), (004) and (006) planes of P.G. were measured and the following results are obtained: the reflectivity of (002) plane was found to be 99% by (transmission method). The ratio of the integrated intensity of the reflected neutrons from (004) and (006) is 3.14+-0.25 and is found to be in agreement with the calculated ratio. The measurements were performed using the fixed scattering angle spectrometer installed in front of the ET-RR-1 reactor horizontal channel

Upgrading pyrolytic residue from waste tires to commercial carbon black.

Science.gov (United States)

Zhang, Xue; Li, Hengxiang; Cao, Qing; Jin, Li'e; Wang, Fumeng

2018-05-01

The managing and recycling of waste tires has become a worldwide environmental challenge. Among the different disposal methods for waste tires, pyrolysis is regarded as a promising route. How to effectively enhance the added value of pyrolytic residue (PR) from waste tires is a matter of great concern. In this study, the PRs were treated with hydrochloric and hydrofluoric acids in turn under ultrasonic waves. The removal efficiency for the ash and sulfur was investigated. The pyrolytic carbon black (PCB) obtained after treating PR with acids was analyzed by X-ray fluorescence spectrophotometry, Fourier transform infrared spectrometry, X-ray diffractometry, laser Raman spectrometry, scanning electron microscopy, thermogravimetric (TG) analysis, and physisorption apparatus. The properties of PCB were compared with those of commercial carbon black (CCB) N326 and N339. Results showed PRs from waste tires were mainly composed of carbon, sulfur, and ash. The carbon in PCB was mainly from the CCB added during tire manufacture rather than from the pyrolysis of pure rubbers. The removal percentages for the ash and sulfur of PR are 98.33% (from 13.98 wt % down to 0.24 wt %) and 70.16% (from 1.81 wt % down to 0.54 wt %), respectively, in the entire process. The ash was mainly composed of metal oxides, sulfides, and silica. The surface properties, porosity, and morphology of the PCB were all close to those of N326. Therefore, PCB will be a potential alternative of N326 and reused in tire manufacture. This route successfully upgrades PR from waste tires to the high value-added CCB and greatly increases the overall efficiency of the waste tire pyrolysis industry.

Characteristics of hydrogen evolution and oxidation catalyzed by Desulfovibrio caledoniensis biofilm on pyrolytic graphite electrode

International Nuclear Information System (INIS)

Yu Lin; Duan Jizhou; Zhao Wei; Huang Yanliang; Hou Baorong

2011-01-01

Highlights: → The sulphate-reducing bacteria (SRB) have the ability to catalyze the hydrogen evolution and oxidation on pyrolytic graphite electrode. → The SRB biofilm decreases the overpotential and electron transfer resistance by the CV and EIS detection. → The SRB biofilm can transfer electrons to the 0.24 V polarized pyrolytic graphite electrode and the maximum current is 0.035 mA, which is attributed to SRB catalyzed hydrogen oxidation. → The SRB biofilm also can obtain electron from the -0.61 V polarized PGE to catalyze the hydrogen evolution. - Abstract: Hydrogenase, an important electroactive enzyme of sulphate-reducing bacteria (SRB), has been discovered having the capacity to connect its activity to solid electrodes by catalyzing hydrogen evolution and oxidation. However, little attention has been paid to similar electroactive characteristics of SRB. In this study, the electroactivities of pyrolytic graphite electrode (PGE) coated with SRB biofilm were investigated. Two corresponding redox peaks were observed by cyclic voltammetry detection, which were related to the hydrogen evolution and oxidation. Moreover, the overpotential for the reactions decreased by about 0.2 V in the presence of the SRB biofilm. When the PGE coated with the SRB biofilm was polarized at 0.24 V (vs. SHE), an oxidation current related to the hydrogen oxidation was found. The SRB biofilm was able to obtain electrons from the -0.61 V (vs. SHE) polarized PGE to form hydrogen, and the electron transfer resistance also decreased with the formation of SRB biofilm, as measured by the non-destructive electrochemical impendence spectroscopy detection. It was concluded that the hydrogen evolution and oxidation was an important way for the electron transfer between SRB biofilm and solid electrode in anaerobic environment.

Pyrolytic and kinetic characteristics of the thermal decomposition of Perilla frutescens polysaccharide.

Directory of Open Access Journals (Sweden)

Quancheng Zhou

Full Text Available The thermal decomposition of Perilla frutescens polysaccharide was examined by thermogravimetry, differential thermogravimetry, and differential thermal analysis. The results showed that the mass loss of the substance proceeded in three steps. The first stage can be attributed to the expulsion of the water from ambient temperature to 182°C. The second stage corresponded to devolatilization from 182°C to 439°C. The residue slowly degraded in the third stage. The weight loss in air is faster than that in nitrogen, because the oxygen in air accelerated the pyrolytic reaction speed reaction. The heating rate significantly affected the pyrolysis of the sample. Similar activation energies of the degradation process (210-211 kJ mol⁻¹ were obtained by the FWO, KAS, and Popescu techniques. According to Popescu mechanism functions, the possible kinetic model was estimated to be Avrami-Erofeev 20 g(α = [-ln(1-α]⁴.

Physical and combustion characterization of pyrolytic oils derived from biomass material upgraded by catalytic hydrogenation

Energy Technology Data Exchange (ETDEWEB)

Vitolo, S.; Ghetti, P. (Universita di Pisa, Pisa (Italy). Dipartimento di Ingegneria Chimica)

1994-11-01

Physical and combustion properties of a pyrolytic bio-oil are determined both as-obtained and after catalytic hydrodeoxygenation. The tests demonstrate that the hydrogenation treatment improves the oil as regards combustibility, viscosity and acidity. Combustion properties of the oil have been characterized by evaporation and temperature programmed combustion profiles. Short communication. 21 refs., 4 figs., 2 tabs.

Neutron transmission through pyrolytic graphite crystals

Energy Technology Data Exchange (ETDEWEB)

Adib, M. [Reactor Physics Department NRC, Reactor Physics Division, Nuclear Research Center, Egyptian Atomic Energy Authority, Cairo 13759 (Egypt); Habib, N. [Reactor Physics Department NRC, Reactor Physics Division, Nuclear Research Center, Egyptian Atomic Energy Authority, Cairo 13759 (Egypt)]. E-mail: nadiahabib15@yahoo.com; Fathaalla, M. [Reactor Physics Department NRC, Reactor Physics Division, Nuclear Research Center, Egyptian Atomic Energy Authority, Cairo 13759 (Egypt)

2006-05-15

Calculation of the total cross-section, neutron transmission and removal coefficient of pyrolytic graphite (PG) for thermal neutron energies were carried out using an additive formula. The formula takes into account the variation of thermal diffuse and Bragg scattering cross-sections in terms of PG temperature and mosaic spread for neutron energies in the range 1 meV to 1 eV. A computer code PG has been developed which allow calculations for the graphite in its hexagonal close-packed structure, when its c-direction is parallel with incident neutron beam (parallel orientation). The calculated total neutron cross-sections for PG in parallel orientation at different mosaic spreads were compared with the measured values. An overall agreement is indicated between the formula fits and experimental data at room and liquid nitrogen temperatures. A feasibility study for use of PG crystals as second-order neutron filter is detailed in terms of mosaic spread, optimum thickness and temperature. The calculated removal coefficients of PG crystals show that such crystals are high efficiency second-order filter within neutron energy intervals (4-7 meV) and (10-15 meV)

Mass spectrometric characterization of a pyrolytic radical source using femtosecond ionization

Energy Technology Data Exchange (ETDEWEB)

Frey, H M; Beaud, P; Mischler, B; Radi, P P; Tzannis, A P; Gerber, T [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-06-01

Radicals play, as reactive species, an important role in the chemistry of combustion. In contrast to atmospheric flames where spectra are congested due to high vibrational and rotational excitation, experiments in the cold environment of a molecular beam (MB) yield clean spectra that can be easily attributed to one species by Resonantly Enhanced Multi Photon Ionization (REMP). A pyrolytic radical source has been set up. To characterize the efficiency of the source `soft` ionization with femto second pulses is applied which results in less fragmentation, simplifying the interpretation of the mass spectrum. (author) figs., tabs., refs.

Structure-property relations for silicon nitride matrix composites reinforced with pyrolytic carbon pre-coated Hi-Nicalon fibers

NARCIS (Netherlands)

Kooi, B.J.; Hosson, J.Th.M. De; Olivier, C.; Veyret, J.B.

1999-01-01

Si3N4 matrix composites reinforced with pyrolytic carbon pre-coated Hi-Nicalon (SiC) fibers, were studied using tensile testing and transmission electron microscopy. Three types of samples were evaluated all with a nominal coating thickness of 200 nm. The composites were densified by hot pressing at

Preparation of pyrolytic carbon coating on graphite for inhibiting liquid fluoride salt and Xe135 penetration for molten salt breeder reactor

International Nuclear Information System (INIS)

Song, Jinliang; Zhao, Yanling; He, Xiujie; Zhang, Baoliang; Xu, Li; He, Zhoutong; Zhang, DongSheng; Gao, Lina; Xia, Huihao; Zhou, Xingtai; Huai, Ping; Bai, Shuo

2015-01-01

Highlights: • Rough laminar pyrolytic carbon coating (RLPyC) is prepared by a fixed-bed method. • The salt-infiltration into IG-110 is 13.5%, less than 0.01% of RLPyC under 1.5 atm. • The helium diffusion coefficient of RLPyC coated graphite is 2.16 × 10 −8 cm 2 /s. • The coated graphite can inhibit the liquid fluoride salt and Xe 135 penetration. - Abstract: A fixed-bed deposition method was used to prepare rough laminar pyrolytic carbon coating (RLPyC) on graphite for inhibiting liquid fluoride salt and Xe 135 penetration during use in molten salt breeder reactor. The RLPyC coating possessed a graphitization degree of 44% and had good contact with graphite substrate. A high-pressure reactor was constructed to evaluate the molten salt infiltration in the isostatic graphite (IG-110, TOYO TANSO CO., LTD.) and RLPyC coated graphite under 1.01, 1.52, 3.04, 5.07 and 10.13 × 10 5 Pa for 12 h. Mercury injection and molten-salt infiltration experiments indicated the porosity and the salt-infiltration amount of 18.4% and 13.5 wt% under 1.52 × 10 5 Pa of IG-110, which was much less than 1.2% and 0.06 wt% under 10.13 × 10 5 Pa of the RLPyC, respectively. A vacuum device was constructed to evaluate the Xe 135 penetration in the graphite. The helium diffusion coefficient of RLPyC coated graphite was 2.16 × 10 −12 m 2 /s, much less than 1.21 × 10 −6 m 2 /s of the graphite. Thermal cycle experiment indicated the coatings possessed excellent thermal stability. The coated graphite could effectively inhibit the liquid fluoride salt and Xe 135 penetration

Preparation of pyrolytic carbon coating on graphite for inhibiting liquid fluoride salt and Xe{sup 135} penetration for molten salt breeder reactor

Energy Technology Data Exchange (ETDEWEB)

Song, Jinliang [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhao, Yanling, E-mail: jlsong1982@yeah.net [School of Materials Science and Engineering, University of Jinan, Jinan 250022 (China); He, Xiujie; Zhang, Baoliang [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Xu, Li [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); He, Zhoutong; Zhang, DongSheng; Gao, Lina; Xia, Huihao; Zhou, Xingtai; Huai, Ping [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Bai, Shuo [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China)

2015-01-15

Highlights: • Rough laminar pyrolytic carbon coating (RLPyC) is prepared by a fixed-bed method. • The salt-infiltration into IG-110 is 13.5%, less than 0.01% of RLPyC under 1.5 atm. • The helium diffusion coefficient of RLPyC coated graphite is 2.16 × 10{sup −8} cm{sup 2}/s. • The coated graphite can inhibit the liquid fluoride salt and Xe{sup 135} penetration. - Abstract: A fixed-bed deposition method was used to prepare rough laminar pyrolytic carbon coating (RLPyC) on graphite for inhibiting liquid fluoride salt and Xe{sup 135} penetration during use in molten salt breeder reactor. The RLPyC coating possessed a graphitization degree of 44% and had good contact with graphite substrate. A high-pressure reactor was constructed to evaluate the molten salt infiltration in the isostatic graphite (IG-110, TOYO TANSO CO., LTD.) and RLPyC coated graphite under 1.01, 1.52, 3.04, 5.07 and 10.13 × 10{sup 5} Pa for 12 h. Mercury injection and molten-salt infiltration experiments indicated the porosity and the salt-infiltration amount of 18.4% and 13.5 wt% under 1.52 × 10{sup 5} Pa of IG-110, which was much less than 1.2% and 0.06 wt% under 10.13 × 10{sup 5} Pa of the RLPyC, respectively. A vacuum device was constructed to evaluate the Xe{sup 135} penetration in the graphite. The helium diffusion coefficient of RLPyC coated graphite was 2.16 × 10{sup −12} m{sup 2}/s, much less than 1.21 × 10{sup −6} m{sup 2}/s of the graphite. Thermal cycle experiment indicated the coatings possessed excellent thermal stability. The coated graphite could effectively inhibit the liquid fluoride salt and Xe{sup 135} penetration.

Absence of field anisotropy in the intrinsic ferromagnetic signals of highly oriented pyrolytic graphite

International Nuclear Information System (INIS)

Ballestar, A.; Setzer, A.; Esquinazi, P.; Garcia, N.

2011-01-01

We have measured the magnetization of bulk samples of highly oriented pyrolytic graphite (HOPG) at magnetic fields applied parallel and perpendicular to the graphene layers. Within experimental error the intrinsic ferromagnetic signals of the samples show similar magnetic moments at saturation for the two magnetic field directions, in contrast to recently published data (J. Cervenka et al., Nat. Phys. 5 (2009) 840). To check that the SQUID device provides correctly the small ferromagnetic signals obtained after subtracting the 100 times larger diamagnetic background, we have prepared a sample with a superconducting Pb-film deposited on one of the HOPG surfaces. We show that the field dependence of the measured magnetic moment and after the background subtraction is highly reliable even in the sub-μ emu range providing the real magnetic properties of the embedded small ferromagnetic and superconducting signals. - Research Highlights: → We have measured the magnetization of bulk samples of highly oriented pyrolytic graphite (HOPG) at magnetic fields applied parallel and perpendicular to the graphene layers.→ Within experimental error the intrinsic ferromagnetic signals of the samples show similar magnetic moments at saturation for the two magnetic field directions.→ The absence of magnetic anisotropy of the intrinsic ferromagnetic order found in HOPG samples contrasts recently published data by Cervenka et al., Nat Phys 5, 840 (2009).

Pyrolytic indices of diagenetic transformation of lignin as biogeochemical proxies for soil organic matter quality and C storage potential

Science.gov (United States)

Jiménez-González, Marco A.; Almendros, Gonzalo; Álvarez, Ana M.; Jiménez-Morillo, Nicasio T.; González-Vila, Francisco J.

2017-04-01

The environmental factors involved in soil organic carbon sequestration remain unclear. The functional relationships between the macromolecular structure of the soil organic matter (SOM) and its resilience has been a constant in classical biogeochemical models. Other more recent hypotheses have postulated that preservation by soil minerals may play a chief role in the accumulation of stable SOM forms. However, additional experimental data are required to demonstrate a cause-to-effect relationship between preservation and stabilization. Some authors might consider that models neglecting the role of macromolecular structure are swapping cause and effect i.e., that SOM structurally flexible, weakly condensed and having 'open' structures is the one with high potential to interact with the soil mineral matrix, leading to stable microaggregates. In this study up to 35 topsoil samples (0-5 cm) were collected from different Spanish soils with contrasted values of organic C (the dependent variable), geological substrate and vegetation type. A wide array of uni- and multivariate chemometric models were applied to independent variables consisting of total abundances of the major aromatic compounds, i.e., alkylbenzenes and methoxyphenols released from whole soil samples using pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). These two families of compounds were selected since they are classically considered to inform on the degree of microbial reworking of lignins, which is an important precursor of the aromatic moiety of the SOM. A series of pyrolytic surrogate indices (aiming to express SOM diagenetic transformation in relation to the original biogenic molecular composition) were especially successful in forecasting SOC, viz: a) ratio between alkylbenzenes and methoxyphenols, b) ratio between short-chain (C0-C4) and long-chain (>C4) alkylbenzenes, c) ratio between methoxyphenols and short-chain alkylbenzenes, and d) ratios between methoxyphenols with different side

Deposition of pyrolytic carbon from C2H2--C3H6--Ar gas mixtures: coating under adiabatic conditions

International Nuclear Information System (INIS)

Gyarmati, E.; Gupta, A.K.; Puetter, B.

In this report a method is described by which pyrolytic carbon can be deposited from ethylene-propylene-argon gas mixtures at temperatures between 1230 and 1330 0 C in 55-mm fluidized bed apparatus without heat exchange with the apparatus

Field emission from the surface of highly ordered pyrolytic graphite

Energy Technology Data Exchange (ETDEWEB)

Knápek, Alexandr, E-mail: knapek@isibrno.cz [Institute of Scientific Instruments of the ASCR, v.v.i., Královopolská 147, Brno (Czech Republic); Sobola, Dinara; Tománek, Pavel [Department of Physics, FEEC, Brno University of Technology, Technická 8, Brno (Czech Republic); Pokorná, Zuzana; Urbánek, Michal [Institute of Scientific Instruments of the ASCR, v.v.i., Královopolská 147, Brno (Czech Republic)

2017-02-15

Highlights: • HOPG shreds were created and analyzed in the UHV conditions. • Current-voltage measurements have been done to confirm electron tunneling, based on the Fowler-Nordheim theory. • Surface was characterized by other surface evaluation methods, in particular by: SNOM, SEM and AFM. - Abstract: This paper deals with the electrical characterization of highly ordered pyrolytic graphite (HOPG) surface based on field emission of electrons. The effect of field emission occurs only at disrupted surface, i.e. surface containing ripped and warped shreds of the uppermost layers of graphite. These deformations provide the necessary field gradients which are required for measuring tunneling current caused by field electron emission. Results of the field emission measurements are correlated with other surface characterization methods such as scanning near-field optical microscopy (SNOM) or atomic force microscopy.

Field emission from the surface of highly ordered pyrolytic graphite

International Nuclear Information System (INIS)

Knápek, Alexandr; Sobola, Dinara; Tománek, Pavel; Pokorná, Zuzana; Urbánek, Michal

2017-01-01

Highlights: • HOPG shreds were created and analyzed in the UHV conditions. • Current-voltage measurements have been done to confirm electron tunneling, based on the Fowler-Nordheim theory. • Surface was characterized by other surface evaluation methods, in particular by: SNOM, SEM and AFM. - Abstract: This paper deals with the electrical characterization of highly ordered pyrolytic graphite (HOPG) surface based on field emission of electrons. The effect of field emission occurs only at disrupted surface, i.e. surface containing ripped and warped shreds of the uppermost layers of graphite. These deformations provide the necessary field gradients which are required for measuring tunneling current caused by field electron emission. Results of the field emission measurements are correlated with other surface characterization methods such as scanning near-field optical microscopy (SNOM) or atomic force microscopy.

Kinetic electron emission from highly oriented pyrolytic graphite surfaces induced by singly charged ions

CERN Document Server

Cernusca, S; Winter, H; Aumayr, F; Loerincik, J; Sroubek, Z

2002-01-01

We present total electron yields determined by current measurements for normal impact of H sup + , H sub 2 sup + , H sub 3 sup + , C sup + , N sup + and O sup + ions (E<=10 keV) on a clean highly oriented pyrolytic graphite surface. The kinetic energy of the projectiles has been varied from near threshold up to 10 keV. By comparing the results to similar data obtained for a polycrystalline Au surface the role of different target properties for kinetic electron emission can be analysed.

Study of nanometric thin pyrolytic carbon films for explosive electron emission cathode in high-voltage planar diode

Energy Technology Data Exchange (ETDEWEB)

Baryshevsky, Vladimir; Belous, Nikolai; Gurinovich, Alexandra; Gurnevich, Evgeny [Research Institute for Nuclear Problems, Belarusian State University, Bobruiskaya Str. 11, Minsk 220030 (Belarus); Kuzhir, Polina, E-mail: polina.kuzhir@gmail.com [Research Institute for Nuclear Problems, Belarusian State University, Bobruiskaya Str. 11, Minsk 220030 (Belarus); National Research Tomsk State University, 36 Lenin Prospekt, Tomsk 634050 (Russian Federation); Maksimenko, Sergey [Research Institute for Nuclear Problems, Belarusian State University, Bobruiskaya Str. 11, Minsk 220030 (Belarus); National Research Tomsk State University, 36 Lenin Prospekt, Tomsk 634050 (Russian Federation); Molchanov, Pavel; Shuba, Mikhail [Research Institute for Nuclear Problems, Belarusian State University, Bobruiskaya Str. 11, Minsk 220030 (Belarus); Roddatis, Vladimir [CIC energiGUNE, Albert Einstein 48, 01510 Minano, Alava (Spain); Institut für Materialphysik of Universität Göttingen, Friedrich-Hund-Platz 1, 37077 Göttingen (Germany); Kaplas, Tommi; Svirko, Yuri [Institute of Photonics, University of Eastern Finland, P.O. Box 111, Joensuu FI-80101 (Finland)

2015-04-30

We report on an experimental study of explosive electron emission properties of cathode made by nanometric thin pyrolytic carbon (PyC) films (2–150 nm) deposited on Cu substrate via methane-based chemical vapor deposition. High current density at level of 300 A/cm{sup 2} in 5 · 10{sup −5} Pa vacuum has been observed together with very stable explosive emission from the planar cathode. The Raman spectroscopy investigation proves that the PyC films remain the same after seven shots. According to the optical image analysis of the cathode before and after one and seven shots, we conclude that the most unusual and interesting feature of using the PyC films/Cu cathode for explosive emission is that the PyC layer on the top of the copper target prevents its evaporation and oxidation, which leads to higher emission stability compared to conventional graphitic/Cu cathodes, and therefore results in longer working life. - Highlights: • Explosive electron emission from pyrolytic carbon (PyC) cathode is reported. • We observe high current density, 300 A/cm{sup 2}, and stable emission parameters. • PyC integrity ensures a high application potential for high current electronics.

Atomic force microscopy study of anion intercalation into highly oriented pyrolytic graphite

Energy Technology Data Exchange (ETDEWEB)

Alliata, D; Haering, P; Haas, O; Koetz, R [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Siegenthaler, H [University of Berne (Switzerland)

1999-08-01

In the context of ion transfer batteries, we studied highly oriented pyrolytic graphite (HOPG) in perchloric acid, as a model to elucidate the mechanism of electrochemical intercalation in graphite. Aim of the work is the local and time dependent investigation of dimensional changes of the host material during electrochemical intercalation processes on the nanometer scale. We used atomic force microscopy (AFM), combined with cyclic voltammetry, as in-situ tool of analysis during intercalation and expulsion of perchloric anions into the HOPG electrodes. According to the AFM measurements, the HOPG interlayer spacing increases by 32% when perchloric anions intercalate, in agreement with the formation of stage IV of graphite intercalation compounds. (author) 3 figs., 3 refs.

Cyclic fatigue and fracture in pyrolytic carbon-coated graphite mechanical heart-valve prostheses: role of small cracks in life prediction.

Science.gov (United States)

Dauskardt, R H; Ritchie, R O; Takemoto, J K; Brendzel, A M

1994-07-01

A fracture-mechanics based study has performed to characterize the fracture toughness and rates of cyclic fatigue-crack growth of incipient flaws in prosthetic heart-valve components made of pyrolytic carbon-coated graphite. Such data are required to predict the safe structural lifetime of mechanical heart-valve prostheses using damage-tolerant analysis. Unlike previous studies where fatigue-crack propagation data were obtained using through-thickness, long cracks (approximately 2-20 mm long), growing in conventional (e.g., compact-tension) samples, experiments were performed on physically small cracks (approximately 100-600 microns long), initiated on the surface of the pyrolytic-carbon coating to simulate reality. Small-crack toughness results were found to agree closely with those measured conventionally with long cracks. However, similar to well-known observations in metal fatigue, it was found that based on the usual computations of the applied (far-field) driving force in terms of the maximum stress intensity, Kmax, small fatigue cracks grew at rates that exceeded those of long cracks at the same applied stress intensity, and displayed a negative dependency on Kmax; moreover, they grew at applied stress intensities less than the fatigue threshold value, below which long cracks are presumed dormant. To resolve this apparent discrepancy, it is shown that long and small crack results can be normalized, provided growth rates are characterized in terms of the total (near-tip) stress intensity (incorporating, for example, the effect of residual stress); with this achieved, in principle, either form of data can be used for life prediction of implant devices. Inspection of the long and small crack results reveals extensive scatter inherent in both forms of growth-rate data for the pyrolytic-carbon material.

Design and Thermal Analysis for Irradiation of Pyrolytic Carbon/Silicon Carbide Diffusion Couples in the High Flux Isotope Reactor

Energy Technology Data Exchange (ETDEWEB)

Gerczak, Tyler J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Kurt R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Petrie, Christian M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

Tristructural-isotropic (TRISO)–coated particle fuel is a promising advanced fuel concept consisting of a spherical fuel kernel made of uranium oxide and uranium carbide, surrounded by a porous carbonaceous buffer layer and successive layers of dense inner pyrolytic carbon (IPyC), silicon carbide (SiC) deposited by chemical vapor , and dense outer pyrolytic carbon (OPyC). This fuel concept is being considered for advanced reactor applications such as high temperature gas-cooled reactors (HTGRs) and molten salt reactors (MSRs), as well as for accident-tolerant fuel for light water reactors (LWRs). Development and implementation of TRISO fuel for these reactor concepts support the US Department of Energy (DOE) Office of Nuclear Energy mission to promote safe, reliable nuclear energy that is sustainable and environmentally friendly. During operation, the SiC layer serves as the primary barrier to metallic fission products and actinides not retained in the kernel. It has been observed that certain fission products are released from TRISO fuel during operation, notably, Ag, Eu, and Sr [1]. Release of these radioisotopes causes safety and maintenance concerns.

Characterization of a polychromatic neutron beam diffracted by pyrolytic graphite crystals

CERN Document Server

Byun, S H; Choi, H D

2002-01-01

The beam spectrum for polychromatic neutrons diffracted by pyrolytic graphite crystals was characterized. The theoretical beam spectrum was obtained using the diffraction model for a mosaic crystal. The lattice vibration effects were included in the calculation using the reported vibration amplitude of the crystal and the measured time-of-flight spectra in the thermal region. The calculated beam spectrum was compared with the results obtained in the absence of thermal motion. The lattice vibration effects became more important for the higher diffraction orders and a large decrease in the neutron flux induced by the vibrations was identified in the epithermal region. The validity of the beam spectrum was estimated by comparing with the effective quantities determined from prompt gamma-ray measurements and Cd-ratios measured both for 1/nu and non-1/nu nuclides.

Pyrolytic carbon-coated stainless steel felt as a high-performance anode for bioelectrochemical systems.

Science.gov (United States)

Guo, Kun; Hidalgo, Diana; Tommasi, Tonia; Rabaey, Korneel

2016-07-01

Scale up of bioelectrochemical systems (BESs) requires highly conductive, biocompatible and stable electrodes. Here we present pyrolytic carbon-coated stainless steel felt (C-SS felt) as a high-performance and scalable anode. The electrode is created by generating a carbon layer on stainless steel felt (SS felt) via a multi-step deposition process involving α-d-glucose impregnation, caramelization, and pyrolysis. Physicochemical characterizations of the surface elucidate that a thin (20±5μm) and homogenous layer of polycrystalline graphitic carbon was obtained on SS felt surface after modification. The carbon coating significantly increases the biocompatibility, enabling robust electroactive biofilm formation. The C-SS felt electrodes reach current densities (jmax) of 3.65±0.14mA/cm(2) within 7days of operation, which is 11 times higher than plain SS felt electrodes (0.30±0.04mA/cm(2)). The excellent biocompatibility, high specific surface area, high conductivity, good mechanical strength, and low cost make C-SS felt a promising electrode for BESs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Characteristics of Pyrolytic Graphite as a Neutron Monochromator

International Nuclear Information System (INIS)

Adib, M.; Habib, N.; El-Mesiry, M.S.; Fathallah, M.

2011-01-01

Pyrolytic graphite (PG) has become nearly indispensable in neutron spectroscopy. Since the integrated reflectivity of the monochromatic neutrons from PG crystals cut along its c-axis is high within a wavelength band from 0.1 nm up to .65 nm. The monochromatic features of PG crystal is detailed in terms of the optimum mosaic spread, crystal thickness and reactor moderating temperature for efficient integrated neutron reflectivity within the wavelength band. A computer code Mono-PG has been developed to carry out the required calculations for the PG hexagonal close-packed structure. Calculation shows that, 2 mm thick of PG crystal having 0.30 FWHM on mosaic spread are the optimum parameters of PG crystal as a monochromator at selected neutron wavelength shorter than 2 nm. However, the integrated neutron intensity of 2nd and 3rd orders from thermal reactor flux is even higher than that of the 1st order one at neutron wavelengths longer than 2 nm. While, from cold reactor flux, integrated neutron intensity of the 1st order within the wavelength band from 0.25 up to 0.5 nm is higher than the 2nd and 3rd ones

The transport phase of pyrolytic oil exiting a fast fluidized bed reactor

Science.gov (United States)

Daugaard, Daren Einar

An unresolved and debated aspect in the fast pyrolysis of biomass is whether the bio-oil exits as a vapor or as an aerosol from the pyrolytic reactor. The determination of the bio-oil transport phase will have direct and significant impact on the design of fast pyrolysis systems. Optimization of both the removal of particulate matter and collection of bio-oil will require this information. In addition, the success of catalytic reforming of bio-oil to high-value chemicals will depend upon this transport phase. A variety of experimental techniques were used to identify the transport phase. Some tests were as simple as examining the catch of an inline filter while others attempted to deduce whether vapor or aerosol predominated by examining the pressure drop across a flow restriction. In supplementary testing, the effect of char on aerosol formation and the potential impact of cracking during direct contact filtering are evaluated. The study indicates that for pyrolysis of red oak approximately 90 wt-% of the collected bio-oil existed as a liquid aerosol. Conversely, the pyrolysis of corn starch produced bio-oil predominately in the vapor phase at the exit of the reactor. Furthermore, it was determined that the addition of char promotes the production of aerosols during pyrolysis of corn starch. Direct contact filtering of the product stream did not collect any liquids and the bio-oil yield was not significantly reduced indicating measurable cracking or coking did not occur.

Erosion of CFC, pyrolytic and boronated graphite under short pulsed laser irradiation

International Nuclear Information System (INIS)

Kraaij, G.J.; Bakker, J.; Stad, R.C.L. van der

1992-07-01

The effect of short pulsed laser irradiation of '0/3' ms and up to 10 MJ/m 2 on different types of carbon base materials is described. These materials are investigated as candidate protection materials for the Plasma Facing Components of NET/ITER. These materials are: carbon fibre composite graphite, pyrolytic graphite and boronated graphite. The volume of the laser induced craters was measured with an optical topographic scanner, and these data are evaluated with a simple model for the erosion. As a results, the enthalpy of ablation is estimated as 30±3 MJ/kg. A comparison is made with finite element numerical calculations, and the effect of lateral heat transfer is estimated using an analytical model. (author). 8 refs., 23 figs., 4 tabs

Small-angle neutron scattering and cyclic voltammetry study on electrochemically oxidized and reduced pyrolytic carbon

International Nuclear Information System (INIS)

Braun, A.; Kohlbrecher, J.; Baertsch, M.; Schnyder, B.; Koetz, R.; Haas, O.; Wokaun, A.

2004-01-01

The electrochemical double layer capacitance and internal surface area of a pyrolytic carbon material after electrochemical oxidation and subsequent reduction was studied with cyclic voltammetry and small-angle neutron scattering. Oxidation yields an enhanced internal surface area (activation), and subsequent reduction causes a decrease of this internal surface area. The change of the Porod constant, as obtained from small-angle neutron scattering, reveals that the decrease in internal surface area is not caused merely by a closing or narrowing of the pores, but by a partial collapse of the pore network

Pyrolytic Graphite as a Tunable Second order Neutron Filter

International Nuclear Information System (INIS)

Adib, M.

2009-01-01

A study has been carried out on the neutron transmission through pyrolytic graphite (PG) crystals in order to check its applicability as an efficient tunable second order neutron filter. The neutron transmission have been calculated as a function of neutron wavelengths in the range from 0.01 nm up to 0.7 nm at various PG mosaic spread, thickness and orientation of its c-axis with respect to the beam direction The Computer package Graphite has been used to provide the required calculation. It was shown that highly aligned (10 FWHM on mosaic spread) PG crystal ∼2 cm thick, may be tuned for optimum scattering of 2 second order neutrons within some favorable wavelength intervals in the range between 0.112 and 0.425 nm by adjusting the crystal in an appropriate orientation. .However, a less quality and thinner PG was found to almost eliminate 2 second order neutrons at only tuned values of wavelength corresponding to the poison of the triple intersection points of the curves (hkl) ± and (00l)

Aluminum doped nickel oxide thin film with improved electrochromic performance from layered double hydroxides precursor in situ pyrolytic route

International Nuclear Information System (INIS)

Shi, Jingjing; Lai, Lincong; Zhang, Ping; Li, Hailong; Qin, Yumei; Gao, Yuanchunxue; Luo, Lei; Lu, Jun

2016-01-01

Electrochromic materials with unique performance arouse great interest on account of potential application values in smart window, low-power display, automobile anti-glare rearview mirror, and e-papers. In this paper, high-performing Al-doped NiO porous electrochromic film grown on ITO substrate has been prepared via a layered double hydroxides(LDHs) precursor in situ pyrolytic route. The Al 3+ ions distributed homogenously within the NiO matrix can significantly influence the crystallinity of Ni-Al LDH and NiO:Al 3+ films. The electrochromic performance of the films were evaluated by means of UV–vis absorption spectroscopy, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry(CA) measurements. In addition, the ratio of Ni 3+ /Ni 2+ also varies with Al content which can lead to different electrochemical performances. Among the as-prepared films, NiO film prepared from Ni-Al (19:1) LDH show the best electrochromic performance with a high transparency of 96%, large optical modulation range (58.4%), fast switching speed (bleaching/coloration times are 1.8/4.2 s, respectively) and excellent durability (30% decrease after 2000 cycles). The improved performance was owed to the synergy of large NiO film specific surface area and porous morphology, as well as Al doping stifled the formation of Ni 3+ making bleached state more pure. This LDHs precursor pyrolytic method is simple, low-cost and environmental benign and is feasible for the preparation of NiO:Al and other Al-doped oxide thin film. - Graphical abstract: The ratio of Ni 3+ /Ni 2+ varies with Al content which can lead to different electrochemical performances. Among the as-prepared films, NiO film prepared from Ni-Al (19:1) LDH show the best electrochromic performance with a high transparency of 96%, large optical modulation range, fast switching speed and excellent durability. Display Omitted

Using sewage sludge pyrolytic gas to modify titanium alloy to obtain high-performance anodes in bio-electrochemical systems

Science.gov (United States)

Gu, Yuan; Ying, Kang; Shen, Dongsheng; Huang, Lijie; Ying, Xianbin; Huang, Haoqian; Cheng, Kun; Chen, Jiazheng; Zhou, Yuyang; Chen, Ting; Feng, Huajun

2017-12-01

Titanium is under consideration as a potential stable bio-anode because of its high conductivity, suitable mechanical properties, and electrochemical inertness in the operating potential window of bio-electrochemical systems; however, its application is limited by its poor electron-transfer capacity with electroactive bacteria and weak ability to form biofilms on its hydrophobic surface. This study reports an effective and low-cost way to convert a hydrophobic titanium alloy surface into a hydrophilic surface that can be used as a bio-electrode with higher electron-transfer rates. Pyrolytic gas of sewage sludge is used to modify the titanium alloy. The current generation, anodic biofilm formation surface, and hydrophobicity are systematically investigated by comparing bare electrodes with three modified electrodes. Maximum current density (15.80 A/m2), achieved using a modified electrode, is 316-fold higher than that of the bare titanium alloy electrode (0.05 A/m2) and that achieved by titanium alloy electrodes modified by other methods (12.70 A/m2). The pyrolytic gas-modified titanium alloy electrode can be used as a high-performance and scalable bio-anode for bio-electrochemical systems because of its high electron-transfer rates, hydrophilic nature, and ability to achieve high current density.

Swift heavy ions induced irradiation effects in monolayer graphene and highly oriented pyrolytic graphite

International Nuclear Information System (INIS)

Zeng, J.; Yao, H.J.; Zhang, S.X.; Zhai, P.F.; Duan, J.L.; Sun, Y.M.; Li, G.P.; Liu, J.

2014-01-01

Monolayer graphene and highly oriented pyrolytic graphite (HOPG) were irradiated by swift heavy ions ( 209 Bi and 112 Sn) with the fluence between 10 11 and 10 14 ions/cm 2 . Both pristine and irradiated samples were investigated by Raman spectroscopy. It was found that D and D′ peaks appear after irradiation, which indicated the ion irradiation introduced damage both in the graphene and graphite lattice. Due to the special single atomic layer structure of graphene, the irradiation fluence threshold Φ th of the D band of graphene is significantly lower ( 11 ions/cm 2 ) than that (2.5 × 10 12 ions/cm 2 ) of HOPG. The larger defect density in graphene than in HOPG indicates that the monolayer graphene is much easier to be damaged than bulk graphite by swift heavy ions. Moreover, different defect types in graphene and HOPG were detected by the different values of I D /I D′ . For the irradiation with the same electronic energy loss, the velocity effect was found in HOPG. However, in this experiment, the velocity effect was not observed in graphene samples irradiated by swift heavy ions

Pyrolytic characteristics of biomass acid hydrolysis residue rich in lignin.

Science.gov (United States)

Huang, Yanqin; Wei, Zhiguo; Yin, Xiuli; Wu, Chuangzhi

2012-01-01

Pyrolytic characteristics of acid hydrolysis residue (AHR) of corncob and pinewood (CAHR, WAHR) were investigated using a thermo-gravimetric analyzer (TGA) and a self-designed pyrolysis apparatus. Gasification reactivity of CAHR char was then examined using TGA and X-ray diffractometer. Result of TGA showed that thermal degradation curves of AHR descended smoothly along with temperature increasing from 150 °C to 850 °C, while a "sharp mass loss stage" for original biomass feedstock (OBF) was observed. Char yield from AHR (42.64-30.35 wt.%) was found to be much greater than that from OBF (26.4-19.15 wt.%). In addition, gasification reactivity of CAHR char was lower than that of corncob char, and there was big difference in micro-crystallite structure. It was also found that CAHR char reactivity decreased with pyrolysis temperature, but increased with pyrolysis heating rate and gasification temperature at 850-950 °C. Furthermore, CAHR char reactivity performed better under steam atmosphere than under CO2 atmosphere. Copyright © 2011 Elsevier Ltd. All rights reserved.

The pyrolytic decomposition of o-, m-, and p-terphenyls and other potential reactor coolants

Energy Technology Data Exchange (ETDEWEB)

Juppe, G.; Hannaert, H.; Biver, F.

1963-03-15

Experiments were made on the pyrolytic decomposition of o-, m-, and p- terphenyls and mixtures of terphenyls with diphenyl. The effects of competing reactions were also studied by initially adding hydrogen, methane, ethane, propane, and benzene. The results indicate that the disappearance of o-, m-, and p-terphenyl seems to follow formally a first order reaction mechanism. The relative stability of the pure individual components increases in the order: oterphenyl (least stable), p-terphenyl, m-terphenyl (most stable). The activation energy was found to be in the neighborhood of 64 kcal/mole. The activation energy for the diphenyl formation during pyrolysis of an irradiated biphenyl-terphenyl mixture was found to be 47.9 kcal/mole. (P.C.H.)

The Erosion of Diamond and Highly Oriented Pyrolytic Graphite After 1.5 Years of Space Exposure

Science.gov (United States)

De Groh, Kim K.; Banks, Bruce A.

2018-01-01

Polymers and other oxidizable materials on the exterior of spacecraft in the low Earth orbit (LEO) space environment can be eroded due to reaction with atomic oxygen (AO). Therefore, in order to design durable spacecraft, it is important to know the LEO AO erosion yield (Ey, volume loss per incident oxygen atom) of materials susceptible to AO reaction. The Polymers Experiment was developed to determine the AO Ey of various polymers and other materials flown in ram and wake orientations in LEO. The experiment was flown as part of the Materials International Space Station Experiment 7 (MISSE 7) mission for 1.5 years on the exterior of the International Space Station (ISS). As part of the experiment, a sample containing Class 2A diamond (100 plane) and highly oriented pyrolytic graphite (HOPG, basal and edge planes) was exposed to ram AO and characterized for erosion. The materials were salt-sprayed prior to flight to provide isolated sites of AO protection. The Ey of the samples was determined through post-flight electron microscopy recession depth measurements. The experiment also included a Kapton H witness sample for AO fluence determination. This paper provides an overview of the MISSE 7 mission, a description of the flight experiment, the characterization techniques used, the mission AO fluence, and the LEO Ey results for diamond and HOPG (basal and edge planes). The data is compared to the Ey of pyrolytic graphite exposed to four years of space exposure as part of the MISSE 2 mission. The results indicate that diamond erodes, but with a very low Ey of 1.58 +/- 0.04 x 10(exp -26) cm(exp 3)/atom. The different HOPG planes displayed significantly different amounts of erosion from each other. The HOPG basal plane had an Ey of 1.05 +/- 0.08 x 10(exp -24) cm(exp 3)/atom while the edge plane had a lower Ey of only 5.38 +/- 0.90 x 10(exp -25) -cm(exp 3)/atom. The Ey data from this ISS spaceflight experiment provides valuable information for understanding of chemistry

Pyrolytic Treatment and Fertility Enhancement of Soils Contaminated with Heavy Hydrocarbons.

Science.gov (United States)

Vidonish, Julia E; Zygourakis, Kyriacos; Masiello, Caroline A; Gao, Xiaodong; Mathieu, Jacques; Alvarez, Pedro J J

2016-03-01

Pyrolysis of contaminated soils at 420 °C converted recalcitrant heavy hydrocarbons into "char" (a carbonaceous material similar to petroleum coke) and enhanced soil fertility. Pyrolytic treatment reduced total petroleum hydrocarbons (TPH) to below regulatory standards (typically hydrocarbons (PAHs) was not observed, with post-pyrolysis levels well below applicable standards. Plant growth studies showed a higher biomass production of Arabidopsis thaliana and Lactuca sativa (Simpson black-seeded lettuce) (80-900% heavier) in pyrolyzed soils than in contaminated or incinerated soils. Elemental analysis showed that pyrolyzed soils contained more carbon than incinerated soils (1.4-3.2% versus 0.3-0.4%). The stark color differences between pyrolyzed and incinerated soils suggest that the carbonaceous material produced via pyrolysis was dispersed in the form of a layer coating the soil particles. Overall, these results suggest that soil pyrolysis could be a viable thermal treatment to quickly remediate soils impacted by weathered oil while improving soil fertility, potentially enhancing revegetation.

Synthesis of gold nanoparticles on the surface of pyrolytic graphite using penicillin as a stabilizing reagent and the catalytic oxidation of α-naphthylamine

Science.gov (United States)

Song, Y. Z.; Song, Y.; Cheng, Z. P.; Zhou, J. F.; Wei, C.

2013-01-01

Electrochemical synthesis of gold nanoparticles on the surface of pyrolytic graphite using penicillin as a stabilizing reagent was proposed. The gold nanoparticles were characterized by scanning electron microscopy, cyclic voltammetry, IR spectra, UV spectra, and powder X-ray diffraction spectra. The electro-chemical catalysis of penicillin for α-naphthylamine was demonstrated.

Catalytic biorefining of plant biomass to non-pyrolytic lignin bio-oil and carbohydrates through hydrogen transfer reactions.

Science.gov (United States)

Ferrini, Paola; Rinaldi, Roberto

2014-08-11

Through catalytic hydrogen transfer reactions, a new biorefining method results in the isolation of depolymerized lignin--a non-pyrolytic lignin bio-oil--in addition to pulps that are amenable to enzymatic hydrolysis. Compared with organosolv lignin, the lignin bio-oil is highly susceptible to further hydrodeoxygenation under low-severity conditions and therefore establishes a unique platform for lignin valorization by heterogeneous catalysis. Overall, the potential of a catalytic biorefining method designed from the perspective of lignin utilization is reported. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Neutron transmission measurements of poly and pyrolytic graphite crystals

Science.gov (United States)

Adib, M.; Abbas, Y.; Abdel-Kawy, A.; Ashry, A.; Kilany, M.; Kenawy, M. A.

The total neutron cross-section measurements of polycrystalline graphite have been carried out in a neutron wavelength from 0.04 to 0.78 nm. This work also presents the neutron transmission measurements of pyrolytic graphite (PG) crystal in a neutron wavelength band from 0.03 to 0.50 nm, at different orientations of the PG crystal with regard to the beam direction. The measurements were performed using three time-of-flight (TOF) spectrometers installed in front of three of the ET-RR-1 reactor horizontal channels. The average value of the coherent scattering amplitude for polycrystalline graphite was calculated and found to be bcoh = (6.61 ± 0.07) fm. The behaviour of neutron transmission through the PG crystal, while oriented at different angles with regard to the beam direction, shows dips at neutron wavelengths corresponding to the reflections from (hkl) planes of hexagonal graphite structure. The positions of the observed dips are found to be in good agreement with the calculated ones. It was also found that a 40 mm thick PG crystal is quite enough to reduce the second-order contamination of the neutron beam from 2.81 to 0.04, assuming that the incident neutrons have a Maxwell distribution with neutron gas temperature 330 K.

Neutron transmission measurements of poly and pyrolytic graphite crystals

International Nuclear Information System (INIS)

Adib, M.; Abdel-Kawy, A.; Kilany, M.

1989-01-01

The total neutron cross-section measurements of polycrystalline graphite have been carried out in a neutron wavelength from 0.04 to 0.78 nm. This work also presents the neutron transmission measurements of pyrolytic graphite (PG) crystal in a neutron wavelength band from 0.03 to 0.50 nm, at different orientations of the PG crystal with regard to the beam direction. The measurements were performed using three time-of-flight (TOF) spectrometers installed in front of three of the ET-RR-1 reactor horizontal channels. The average value of the coherent scattering amplitude for polycrystalline graphite was calculated and found to be b coh = (6.61 ± 0.07) fm. The behaviour of neutron transmission through the PG crystal, while orientated at different angles with regard to the beam direction, shows dips at neutron wavelengths corresponding to the reflections from (hk1) planes of hexagonal graphite structure. The positions of the observed dips are found to be in good agreement with the calculated ones. It was also found that a 40 mm thick PG crystal is quite enough to reduce the second-order contamination of the neutron beam from 2.81 to 0.04, assuming that the incident neutrons have a Maxwell distribution with neutron gas temperature 330 K. (author)

Accelerator-Based Irradiation Creep of Pyrolytic Carbon Used in TRISO Fuel Particles for the (VHTR) Very High Temperature Reactors

International Nuclear Information System (INIS)

Wang, Lumin; Was, Gary

2010-01-01

Pyrolytic carbon (PyC) is one of the important structural materials in the TRISO fuel particles which will be used in the next generation of gas-cooled very-high-temperature reactors (VHTR). When the TRISO particles are under irradiation at high temperatures, creep of the PyC layers may cause radial cracking leading to catastrophic particle failure. Therefore, a fundamental understanding of the creep behavior of PyC during irradiation is required to predict the overall fuel performance.

Phase transitions to 120 GPa for shock-compressed pyrolytic and hot-pressed boron nitride

International Nuclear Information System (INIS)

Gust, W.H.; Young, D.A.

1977-01-01

Shock-compression characteristics of two types of hexagonal graphitelike boron nitride have been investigated. Highly oriented very pure pyrolytic boron nitride exhibits shock-velocity versus particle-velocity discontinuities that appear to be manifestations of the initiation of a sluggish phase transition. This transition begins at 20 GPa and is driven to completion (melting) at 75 GPa. Discontinuities in the plot for impure hot-pressed boron nitride indicate initiation at 10 GPa and completion at 20 GPa. The (U/sub s/, U/sub p/) plots follow essentially the same paths for 4.0 < U/sub p/ < 5.2 km/sec. No evidence for a transition to a metalliclike state was seen. Temperature calculations indicate that the material is liquid above approx.80 GPa

Aluminum doped nickel oxide thin film with improved electrochromic performance from layered double hydroxides precursor in situ pyrolytic route

Energy Technology Data Exchange (ETDEWEB)

Shi, Jingjing; Lai, Lincong; Zhang, Ping; Li, Hailong; Qin, Yumei; Gao, Yuanchunxue; Luo, Lei; Lu, Jun, E-mail: lujun@mail.buct.edu.cn

2016-09-15

Electrochromic materials with unique performance arouse great interest on account of potential application values in smart window, low-power display, automobile anti-glare rearview mirror, and e-papers. In this paper, high-performing Al-doped NiO porous electrochromic film grown on ITO substrate has been prepared via a layered double hydroxides(LDHs) precursor in situ pyrolytic route. The Al{sup 3+} ions distributed homogenously within the NiO matrix can significantly influence the crystallinity of Ni-Al LDH and NiO:Al{sup 3+} films. The electrochromic performance of the films were evaluated by means of UV–vis absorption spectroscopy, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry(CA) measurements. In addition, the ratio of Ni{sup 3+}/Ni{sup 2+} also varies with Al content which can lead to different electrochemical performances. Among the as-prepared films, NiO film prepared from Ni-Al (19:1) LDH show the best electrochromic performance with a high transparency of 96%, large optical modulation range (58.4%), fast switching speed (bleaching/coloration times are 1.8/4.2 s, respectively) and excellent durability (30% decrease after 2000 cycles). The improved performance was owed to the synergy of large NiO film specific surface area and porous morphology, as well as Al doping stifled the formation of Ni{sup 3+} making bleached state more pure. This LDHs precursor pyrolytic method is simple, low-cost and environmental benign and is feasible for the preparation of NiO:Al and other Al-doped oxide thin film. - Graphical abstract: The ratio of Ni{sup 3+}/Ni{sup 2+} varies with Al content which can lead to different electrochemical performances. Among the as-prepared films, NiO film prepared from Ni-Al (19:1) LDH show the best electrochromic performance with a high transparency of 96%, large optical modulation range, fast switching speed and excellent durability. Display Omitted.

Sustainable pyrolytic sludge-char preparation on improvement of closed-loop sewage sludge treatment: Characterization and combined in-situ application.

Science.gov (United States)

Jin, Zhengyu; Chang, Fengmin; Meng, Fanlin; Wang, Cuiping; Meng, Yao; Liu, Xiaoji; Wu, Jing; Zuo, Jiane; Wang, Kaijun

2017-10-01

Aiming at closed-loop sustainable sewage sludge treatment, an optimal and economical pyrolytic temperature was found at 400-450 °C considering its pyrolysis efficiency of 65%, fast cracking of hydrocarbons, proteins and lipids and development of aromatized porous structure. Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) tests demonstrated the development of adsorptive functional groups and crystallographic phases of adsorptive minerals. The optimal sludge-char, with a medium specific surface area of 39.6 m 2  g -1 and an iodine number of 327 mgI 2 g -1 , performed low heavy metals lixiviation. The application of sludge-char in raw sewage could remove 30% of soluble chemical oxygen demand (SCOD), along with an acetic acid adsorption capacity of 18.0 mg g -1 . The developed mesopore and/or macropore structures, containing rich acidic and basic functional groups, led to good biofilm matrices for enhanced microbial activities and improved autotrophic nitrification in anoxic stage of an A/O reactor through adsorbed extra carbon source, and hence achieved the total nitrogen (TN) removal up to 50.3%. It is demonstrated that the closed-loop sewage sludge treatment that incorporates pyrolytic sludge-char into in-situ biological sewage treatment can be a promising sustainable strategy by further optimization. Copyright © 2017 Elsevier Ltd. All rights reserved.

The pyrolytic-plasma method and the device for the utilization of hazardous waste containing organic compounds

Energy Technology Data Exchange (ETDEWEB)

Opalińska, Teresa [Tele and Radio Research Institute, Ratuszowa 11, 03-450 Warsaw (Poland); Wnęk, Bartłomiej, E-mail: bartlomiej.wnek@itr.org.pl [Tele and Radio Research Institute, Ratuszowa 11, 03-450 Warsaw (Poland); Witowski, Artur; Juszczuk, Rafał; Majdak, Małgorzata [Tele and Radio Research Institute, Ratuszowa 11, 03-450 Warsaw (Poland); Bartusek, Stanilav [VŠB—Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava − Poruba Czech Republic (Czech Republic)

2016-11-15

Highlights: • A first stage of the process of waste utilization consisted in pyrolysis of waste. • Then the pyrolytic gas was oxidized with a use of non-equilibrium plasma. • The device for the process implementation was built and characterized. • Correctness of the device operation was proven with a use of the decomposition of PE. • Usefulness of the method was proven in the process of utilization of EW. - Abstract: This paper is focused on the new method of waste processing. The waste, including hazardous waste, contain organic compounds. The method consists in two main processes: the pyrolysis of waste and the oxidation of the pyrolytic gas with a use of non-equilibrium plasma. The practical implementation of the method requires the design, construction and testing of the new device in large laboratory scale. The experiments were carried out for the two kinds of waste: polyethylene as a model waste and the electronic waste as a real waste. The process of polyethylene decomposition showed that the operation of the device is correct because 99.74% of carbon moles contained in the PE samples was detected in the gas after the process. Thus, the PE samples practically were pyrolyzed completely to hydrocarbons, which were completely oxidized in the plasma reactor. It turned out that the device is useful for decomposition of the electronic waste. The conditions in the plasma reactor during the oxidation process of the pyrolysis products did not promote the formation of PCDD/Fs despite the presence of the oxidizing conditions. An important parameter determining the efficiency of the oxidation of the pyrolysis products is gas temperature in the plasma reactor.

Bactericidal activity of self-assembled palmitic and stearic fatty acid crystals on highly ordered pyrolytic graphite.

Science.gov (United States)

Ivanova, Elena P; Nguyen, Song Ha; Guo, Yachong; Baulin, Vladimir A; Webb, Hayden K; Truong, Vi Khanh; Wandiyanto, Jason V; Garvey, Christopher J; Mahon, Peter J; Mainwaring, David E; Crawford, Russell J

2017-09-01

The wings of insects such as cicadas and dragonflies have been found to possess nanostructure arrays that are assembled from fatty acids. These arrays can physically interact with the bacterial cell membranes, leading to the death of the cell. Such mechanobactericidal surfaces are of significant interest, as they can kill bacteria without the need for antibacterial chemicals. Here, we report on the bactericidal effect of two of the main lipid components of the insect wing epicuticle, palmitic (C16) and stearic (C18) fatty acids. Films of these fatty acids were re-crystallised on the surface of highly ordered pyrolytic graphite. It appeared that the presence of two additional CH 2 groups in the alkyl chain resulted in the formation of different surface structures. Scanning electron microscopy and atomic force microscopy showed that the palmitic acid microcrystallites were more asymmetric than those of the stearic acid, where the palmitic acid microcrystallites were observed to be an angular abutment in the scanning electron micrographs. The principal differences between the two types of long-chain saturated fatty acid crystallites were the larger density of peaks in the upper contact plane of the palmitic acid crystallites, as well as their greater proportion of asymmetrical shapes, in comparison to that of the stearic acid film. These two parameters might contribute to higher bactericidal activity on surfaces derived from palmitic acid. Both the palmitic and stearic acid crystallite surfaces displayed activity against Gram-negative, rod-shaped Pseudomonas aeruginosa and Gram-positive, spherical Staphylococcus aureus cells. These microcrystallite interfaces might be a useful tool in the fabrication of effective bactericidal nanocoatings. Nanostructured cicada and dragonfly wing surfaces have been discovered to be able physically kill bacterial cells. Here, we report on the successful fabrication of bactericidal three-dimensional structures of two main lipid

Chemical and Pyrolytic Thermogravimetric Characterization of Nigerian Bituminous Coals

Directory of Open Access Journals (Sweden)

Nyakuma Bemgba Bevan

2016-12-01

Full Text Available The discovery of new coal deposits in Nigeria presents solutions for nation’s energy crises and prospects for socioeconomic growth and sustainable development. Furthermore, the quest for sustainable energy to limit global warming, climate change, and environmental degradation has necessitated the exploration of alternatives using cleaner technologies such as coal pyrolysis. However, a lack of comprehensive data on physico-chemical and thermal properties of Nigerian coals has greatly limited their utilization. Therefore, the physico-chemical properties, rank (classification, and thermal decomposition profiles of two Nigerian bituminous coals – Afuze (AFZ and Shankodi-Jangwa (SKJ – were examined in this study. The results indicate that the coals contain high proportions of C, H, N, S, O and a sufficiently high heating value (HHV for energy conversion. The coal classification revealed that the Afuze (AFZ coal possesses a higher rank, maturity, and coal properties compared to the Shankodi-Jangwa (SKJ coal. A thermal analysis demonstrated that coal pyrolysis in both cases occurred in three stages; drying (30-200 °C, devolatilization (200-600 °C, and char decomposition (600-1000 °C. The results also indicated that pyrolysis at 1000 °C is not sufficient for complete pyrolysis. In general, the thermochemical and pyrolytic fuel properties indicate that the coal from both places can potentially be utilized for future clean energy applications.

Electronic Transport and Raman Spectroscopy Characterization in Ion-Implanted Highly Oriented Pyrolytic Graphite

Science.gov (United States)

de Jesus, R. F.; Turatti, A. M.; Camargo, B. C.; da Silva, R. R.; Kopelevich, Y.; Behar, M.; Balzaretti, N. M.; Gusmão, M. A.; Pureur, P.

2018-02-01

We report on Raman spectroscopy, temperature-dependent in-plane resistivity, and in-plane magnetoresistance experiments in highly oriented pyrolytic graphite (HOPG) implanted with As and Mn. A pristine sample was also studied for comparison. Two different fluences were applied, φ = 0.5× 10^{16} {ions}/{cm}2 and φ = 1.0× 10^{16} {ions}/{cm}2. The implantations were carried out with 20 keV ion energy at room temperature. The Raman spectroscopy results reveal the occurrence of drastic changes of the HOPG surface as a consequence of the damage caused by ionic implantation. For the higher dose, the complete amorphization limit is attained. The resistivity and magnetoresistance results were obtained placing electrical contacts on the irradiated sample surface. Owing to the strong anisotropy of HOPG, the electrical current propagates mostly near the implanted surface. Shubnikov-de Haas (SdH) oscillations were observed in the magnetoresistance at low temperatures. These results allow the extraction of the fundamental SdH frequencies and the carriers' effective masses. In general, the resistivity and magnetoresistance results are consistent with those obtained from Raman measurements. However, one must consider that the electrical conduction in our samples occurs as in a parallel association of a largely resistive thin sheet at the surface strongly modified by disorder with a thicker layer where damage produced by implantation is less severe. The SdH oscillations do not hint to significant changes in the carrier density of HOPG.

DEPOSITION AND PROPERTIES OF A LITTLE-ORIENTED PYROLYTIC CARBON; Deposition et proprietes d'un carbone pyrolytique peu oriente

Energy Technology Data Exchange (ETDEWEB)

Rappeneau, J; Bocquet, M; Yvars, M; David, C; Auriol, A

1963-06-15

Pyrolytic carbon obtained by thermal decomposition of acetylene, at partial pressures of 0.02 to 0.1 atm, on walls heated to between 1550 and 1650 deg C, is characterized by its low density (1.35) and a not very marked preferred orientation of the crystallites. The latter property is expressed by an absence of laminar structure in the deposit and by its good compatibility with an artiticial graphite substrate. Following a description of the method of deposition and an outline of the structural properties, certain physical and chemical properties of the substance are examined. (auth)

Influence of pyrolytic temperature on uranium adsorption capability by biochar derived from macauba coconut residue

Energy Technology Data Exchange (ETDEWEB)

Guilhen, Sabine Neusatz; Fungaro, Denise Alves [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Coleti, Jorge; Tenório, Jorge Alberto Soares, E-mail: snguilhen@ipen.br, E-mail: dfungaro@ipen.br, E-mail: jorgecoleti@usp.br, E-mail: jtenorio@usp.br [Universidade de São Paulo (USP), São Paulo, SP (Brazil). Departamento de Engenharia Metalúrgica e de Materiais

2017-07-01

Biochar (BC) is a carbon-rich product obtained when biomass is thermally decomposed at relatively low temperatures (under 700°C) and limited supply of oxygen in a process called pyrolysis. The conversion of biomass into BC can not only result in renewable energy source of synthetic gas and bio-oil, but also decrease the content of CO{sub 2} in the atmosphere, as well as improving soil fertility. Because of its porous structure, charged surface and surface functional groups, BC exhibits a great potential as an adsorbent. Brazilian agro energy chain involves tons of biomass waste, providing a wide range of biomass with different chemical and physical properties. BC characteristics strongly depend on the feedstock and the pyrolysis conditions, in which the temperature is the key parameter. The aim of this study was to evaluate the adsorption potential for the removal of uranium, U(VI), from aqueous solutions using BC obtained through the pyrolysis of the Macauba (Acrocomia aculeata) coconut endocarp as a function of the final pyrolytic temperature. BCs produced at higher temperatures are likely to present lower H/C and O/C ratios, indicating the loss of easily degradable carbon compounds such as volatile matter. In contrast, low-temperature pyrolysis produces not only a higher BC yield, but also richer in surface functional groups which will likely enable interactions with the U(VI) ions. The endocarp was subjected to six different pyrolytic temperatures, ranging from 250°C to 750 °C. The influence of parameters such as pH, sorbent dose and initial concentration on the adsorption of U(VI) was investigated. The maximum adsorption capacity (q) was achieved for the BC obtained at 250°C (BC250), which presented a removal percentage of approx. 86%, demonstrating the potential of the BC from macauba endocarp for treatment of wastewaters. Thus, submitting the endocarp to temperatures higher than 250°C becomes unnecessary, saving time and reducing operating costs

Influence of pyrolytic temperature on uranium adsorption capability by biochar derived from macauba coconut residue

International Nuclear Information System (INIS)

Guilhen, Sabine Neusatz; Fungaro, Denise Alves; Coleti, Jorge; Tenório, Jorge Alberto Soares

2017-01-01

Biochar (BC) is a carbon-rich product obtained when biomass is thermally decomposed at relatively low temperatures (under 700°C) and limited supply of oxygen in a process called pyrolysis. The conversion of biomass into BC can not only result in renewable energy source of synthetic gas and bio-oil, but also decrease the content of CO 2 in the atmosphere, as well as improving soil fertility. Because of its porous structure, charged surface and surface functional groups, BC exhibits a great potential as an adsorbent. Brazilian agro energy chain involves tons of biomass waste, providing a wide range of biomass with different chemical and physical properties. BC characteristics strongly depend on the feedstock and the pyrolysis conditions, in which the temperature is the key parameter. The aim of this study was to evaluate the adsorption potential for the removal of uranium, U(VI), from aqueous solutions using BC obtained through the pyrolysis of the Macauba (Acrocomia aculeata) coconut endocarp as a function of the final pyrolytic temperature. BCs produced at higher temperatures are likely to present lower H/C and O/C ratios, indicating the loss of easily degradable carbon compounds such as volatile matter. In contrast, low-temperature pyrolysis produces not only a higher BC yield, but also richer in surface functional groups which will likely enable interactions with the U(VI) ions. The endocarp was subjected to six different pyrolytic temperatures, ranging from 250°C to 750 °C. The influence of parameters such as pH, sorbent dose and initial concentration on the adsorption of U(VI) was investigated. The maximum adsorption capacity (q) was achieved for the BC obtained at 250°C (BC250), which presented a removal percentage of approx. 86%, demonstrating the potential of the BC from macauba endocarp for treatment of wastewaters. Thus, submitting the endocarp to temperatures higher than 250°C becomes unnecessary, saving time and reducing operating costs. (author)

Theoretical Study of the Kinetics of the Pyrolytic Elimination Reaction of Ethyl Chloride

Directory of Open Access Journals (Sweden)

Isaiah Ajibade Adejoro

2010-01-01

Full Text Available The products of the gas-phase elimination of ethyl chloride are hydrogen chloride and ethane. Using AM1, MNDO and PM3 Hamiltonians of quantum mechanical computer code called MOPAC, a procedure for the kinetics and computation of the Arrhenius parameters for the pyrolytic elimination reaction of ethyl chloride was devised in order to evaluate the predictive ability of the three Hamiltonians used. The first-order rate coefficient for the three Hamiltonians are 1.15x10-8s-1, 4.55x10-15s-1 and 5.36x10-4s-1 for AM1, MNDO and PM3 respectively. The results obtained showed that the rate constant for the computed Arrhenius parameters compare well with the experimental values in the literature, thus showing that the computational procedure adequately simulates experimental results; also the semi-empirical AMI calculation has the best predictive ability with experiment followed by PM3 while MNDO has the least.

Comparative studies of the pyrolytic and kinetic characteristics of maize straw and the seaweed Ulva pertusa.

Directory of Open Access Journals (Sweden)

Naihao Ye

Full Text Available Seaweed has attracted considerable attention as a potential biofuel feedstock. The pyrolytic and kinetic characteristics of maize straw and the seaweed Ulva pertusa were studied and compared using heating rates of 10, 30 and 50°C min(-1 under an inert atmosphere. The activation energy, and pre-exponential factors were calculated by the Flynn-Wall-Ozawa (FWO, Kissinger-Akahira-Sunose (KAS and Popescu methods. The kinetic mechanism was deduced by the Popescu method. The results indicate that there are three stages to the pyrolysis; dehydration, primary devolatilization and residual decomposition. There were significant differences in average activation energy, thermal stability, final residuals and reaction rates between the two materials. The primary devolatilization stage of U. pertusa can be described by the Avramic-Erofeev equation (n=3, whereas that of maize straw can be described by the Mampel Power Law (n=2. The average activation energy of maize straw and U. pertusa were 153.0 and 148.7 KJ mol(-1, respectively. The pyrolysis process of U.pertusa would be easier than maize straw. And co-firing of the two biomass may be require less external heat input and improve process stability. There were minor kinetic compensation effects between the pre-exponential factors and the activation energy.

Comparative studies of the pyrolytic and kinetic characteristics of maize straw and the seaweed Ulva pertusa.

Science.gov (United States)

Ye, Naihao; Li, Demao; Chen, Limei; Zhang, Xiaowen; Xu, Dong

2010-09-10

Seaweed has attracted considerable attention as a potential biofuel feedstock. The pyrolytic and kinetic characteristics of maize straw and the seaweed Ulva pertusa were studied and compared using heating rates of 10, 30 and 50°C min(-1) under an inert atmosphere. The activation energy, and pre-exponential factors were calculated by the Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS) and Popescu methods. The kinetic mechanism was deduced by the Popescu method. The results indicate that there are three stages to the pyrolysis; dehydration, primary devolatilization and residual decomposition. There were significant differences in average activation energy, thermal stability, final residuals and reaction rates between the two materials. The primary devolatilization stage of U. pertusa can be described by the Avramic-Erofeev equation (n=3), whereas that of maize straw can be described by the Mampel Power Law (n=2). The average activation energy of maize straw and U. pertusa were 153.0 and 148.7 KJ mol(-1), respectively. The pyrolysis process of U.pertusa would be easier than maize straw. And co-firing of the two biomass may be require less external heat input and improve process stability. There were minor kinetic compensation effects between the pre-exponential factors and the activation energy.

Multiferroic BiFeO3 thin films and nanodots grown on highly oriented pyrolytic graphite substrates

Science.gov (United States)

Shin, Hyun Wook; Son, Jong Yeog

2017-12-01

Multiferroic BiFeO3 (BFO) thin films and nanodots are deposited on highly oriented pyrolytic graphite (HOPG) substrates via a pulsed laser deposition technique, where the HOPG surface has a honeycomb lattice structure made of carbon atoms, similar to graphene. A graphene/BFO/HOPG capacitor exhibited multiferroic properties, namely ferroelectricity (a residual polarization of 26.8 μC/cm2) and ferromagnetism (a residual magnetization of 1.1 × 10-5 emu). The BFO thin film had high domain wall energies and demonstrated switching time of approximately 82 ns. An 8-nm BFO nanodot showed a typical piezoelectric hysteresis loop with an effective residual piezoelectric constant of approximately 110 pm/V and exhibited two clearly separated current curves depending on the ferroelectric polarization direction.

Adsorption and manipulation of carbon onions on highly oriented pyrolytic graphite studied with atomic force microscopy

International Nuclear Information System (INIS)

Zhou Jianfeng; Shen Ziyong; Hou Shimin; Zhao Xingyu; Xue Zengquan; Shi Zujin; Gu Zhennan

2007-01-01

Carbon onions produced by DC arc discharge method were deposited on highly oriented pyrolytic graphite (HOPG) surface and their adsorption and manipulation was studied using an atomic force microscopy (AFM). Well-dispersed adsorption of carbon onions on HOPG surface was obtained and aggregations of onions were not observed. The van der Waals interaction between the onion and HOPG surface and that between two onions, were calculated and discussed using Hamaker's theory. The manipulation of adsorbed onions on HOPG surface was realized using the AFM in both the raster mode and the vector mode. The controllability and precision of two manipulation modes were compared and the vector mode manipulation was found superior, and is a useful technique for the construction of nano-scale devices based on carbon onions

THE EFFECT OF APPLIED STRESS ON THE GRAPHITIZATION OF PYROLYTIC GRAPHITE

Energy Technology Data Exchange (ETDEWEB)

Bragg, R H; Crooks, D D; Fenn, Jr, R W; Hammond, M L

1963-06-15

Metallographic and x-ray diffraction studies were made of the effect of applied stress at high temperature on the structure of pyrolytic graphite (PG). The dominant factor was whether the PG was above or below its graphitization temperature, which, in turn, was not strongly dependent on applied stress. Below the graphitization temperature, the PG showed a high proportion of disordered layers (0.9), a fairly large mean tilt angle (20 deg ) and a small crystailite size (La --150 A). Fracture occurred at low stress and strain and the materiai exhibited a high apparent Young's modulus ( approximates 4 x 10/sup 6/ psi). Above the graphitization temperature, graphitization was considerably enhanced by strain up to about 8%. The disorder parameter was decreased from a zero strain value of 0.3 to 0.l5 with strain, the mean tilt angle was decreased to 4 deg , and a fivefold increase in crystallite size occurred. When the strainenhanced graphitization was complete, the material exhibited a low apparent modulus ( approximates 0.5 x 10/sup 6/ psi) and large plastic strains (>100%) for a constant stress ( approximates 55 ksi). Graphitization was shown to be a spontaneous process that is promoted by breaking cross-links thermally, and the process is furthered by chemical attack and plastic strain. (auth)

Removal of copper by oxygenated pyrolytic tire char: kinetics and mechanistic insights.

Science.gov (United States)

Quek, Augustine; Balasubramanian, Rajashekhar

2011-04-01

The kinetics of copper ion (Cu(II)) removal from aqueous solution by pyrolytic tire char was modeled using five different conventional models. A modification to these models was also developed through a modified equation that accounts for precipitation. Conventional first- and second-order reaction models did not fit the copper sorption kinetics well, indicating a lack of simple rate-order dependency on solute concentration. Instead, a reversible first-order rate reaction showed the best fit to the data, indicating a dependence on surface functional groups. Due to the varying solution pH during the sorption process, modified external and internal mass transfer models were employed. Results showed that the sorption of copper onto oxygenated chars was limited by external mass transfer and internal resistance with and without the modification. However, the modification of the sorption process produced very different results for unoxygenated chars, which showed neither internal nor external limitation to sorption. Instead, its slow sorption rate indicates a lack of surface functional groups. The sorption of Cu(II) by oxygenated and unoxygenated chars was also found to occur via three and two distinct stages, respectively. Copyright © 2010 Elsevier Inc. All rights reserved.

X-ray photoelectron spectroscopy study of pyrolytically coated graphite platforms submitted to simulated electrothermal atomic absorption spectrometry conditions

International Nuclear Information System (INIS)

Ruiz, Frine; Benzo, Zully; Quintal, Manuelita; Garaboto, Angel; Albornoz, Alberto; Brito, Joaquin L.

2006-01-01

The present work is part of an ongoing project aiming to a better understanding of the mechanisms of atomization on graphite furnace platforms used for electrothermal atomic absorption spectrometry (ETAAS). It reports the study of unused pyrolytic graphite coated platforms of commercial origin, as well as platforms thermally or thermo-chemically treated under simulated ETAAS analysis conditions. X-ray photoelectron spectroscopy (XPS) was employed to study the elements present at the surfaces of the platforms. New, unused platforms showed the presence of molybdenum, of unknown origin, in concentrations up to 1 at.%. Species in two different oxidations states (Mo 6+ and Mo 2+ ) were detected by analyzing the Mo 3d spectral region with high resolution XPS. The analysis of the C 1s region demonstrated the presence of several signals, one of these at 283.3 eV related to the presence of Mo carbide. The O 1s region showed also various peaks, including a signal that can be attributed to the presence of MoO 3 . Some carbon and oxygen signals were consistent with the presence of C=O and C-O- (probably C-OH) groups on the platforms surfaces. Upon thermal treatment up to 2900 deg. C, the intensity of the Mo signal decreased, but peaks due to Mo oxides (Mo 6+ and Mo 5+ ) and carbide (Mo 2+ ) were still apparent. Thermo-chemical treatment with 3 vol.% HCl solutions and heating up to 2900 deg. C resulted in further diminution of the Mo signal, with complete disappearance of Mo carbide species. Depth profiling of unused platforms by Ar + ion etching at increasing time periods demonstrated that, upon removal of several layers of carbonaceous material, the Mo signal disappears suggesting that this contamination is present only at the surface of the pyrolytic graphite platform

The optical constants and spectral specular reflectivity of highly oriented pyrolytic graphite (HOPG)

International Nuclear Information System (INIS)

Havstad, M.A.; Schildbach, M.A.; McLean, W. II.

1993-08-01

Measurements of the specular reflectivity and the optical constants of highly ordered pyrolytic graphite (HOPG) have been made using two independent optical systems. The first measures reflectance (at 1.06 μm and 293 K) by comparing the intensity of a laser beam before and after reflecting off the sample. The second determines the complex index of raft-action (from 0.55 to 8.45 μm, with sample temperatures of 293, 480, 900 and 1300 K) by ellipsometry. Agreement between the two methods is good. Moderate reflectivities are observed over the full spectral range of measurement: the spectral directional-hemispherical reflectivity at normal incidence varies from 0.41 at 0.55 μm to 0.74 at 8.45 μm. The components of the complex index of refraction increase smoothly with wavelength. The index of refraction increases from 3.10 at 0.55 μm to 7.84 at 8.45 μm. The extinction coefficient varies from 2.01 to 6.66 over the same range

Selection, rejection and optimisation of pyrolytic graphite (PG) crystal analysers for use on the new IRIS graphite analyser bank

International Nuclear Information System (INIS)

Marshall, P.J.; Sivia, D.S.; Adams, M.A.; Telling, M.T.F.

2000-01-01

This report discusses design problems incurred by equipping the IRIS high-resolution inelastic spectrometer at the ISIS pulsed neutron source, UK with a new 4212 piece pyrolytic graphite crystal analyser array. Of the 4212 graphite pieces required, approximately 2500 will be newly purchased PG crystals with the remainder comprising of the currently installed graphite analysers. The quality of the new analyser pieces, with respect to manufacturing specifications, is assessed, as is the optimum arrangement of new PG pieces amongst old to circumvent degradation of the spectrometer's current angular resolution. Techniques employed to achieve these criteria include accurate calliper measurements, FORTRAN programming and statistical analysis. (author)

Process and apparatus for pyrolytic decomposition and coking of mixtures of finely divided solid carbonaceous material and hydrocarbon oils

Energy Technology Data Exchange (ETDEWEB)

Fisher, A

1933-09-18

A process is described for pyrolytic decomposition and coking of mixtures of finely divided solid and semi-solid carbonaceous material and hydrocarbon oils, whereby the mixture is first heated to a high temperature; the heated products are introduced into a coking zone, where vapors are separated from nonvaporous residue afterwards to be cracked and condensed, characterized in that the mixture is heated to a high temperature under substantially noncoking conditions and that nonvaporous residue obtained in the coking zone is coked as a relatively thin layer on an externally intensely heated surface, preferably of heat-conducting, fireproof material, such as carborundum, fused-aluminum oxide, or clay.

Pyrolytic sugars from cellulosic biomass

Science.gov (United States)

Kuzhiyil, Najeeb

phosphoric acids) and organic acids (formic and acetic acids) followed by analytical pyrolysis on a micropyrolyzer/GC/MS/FID system. It was found that sulfuric and phosphoric acids are very effective in passivating the AAEM thereby increasing the yield of anhydrosugars. An excellent correlation was discovered between the amount of acid required to obtain the maximum yield of anhydrosugars and the amount of AAEM contained in the biomass feedstock. In the micro-scale studies, up to 56% of the cellulose contained in the biomass was converted into anhydrosugars which is close to the 57% conversion obtained from pure cellulose pyrolysis. It is known that LG polymerization and subsequent charring occur at temperatures above 275°C depending on the vapor pressure of LG in the gas stream. A study of pyrolysis of acid-infused biomass feedstocks at various temperatures revealed that LG recovery is best at lower temperatures than the conventional pyrolysis temperature range of 450-500°C. Pyrolysis of acid-infused biomass failed in a continuous fluidized bed reactor due to clogging of the bed. The feedstock formed vitreous material along with the fluidizing sand that was formed from poor pyrolysis of lignin. However, more investigation of this phenomenon is a subject for future work. Pyrolysis experiments on an auger type reactor were successful in producing bio-oils with unprecedented amounts of sugars. Though there was increase in charring when compared to the control feedstock, pyrolysis of red oak infused with 0.4 wt% of sulfuric acid produced bio-oil with 18wt% of sugars. One of the four fractions of bio-oil collected contained most of the sugars, which shows significant potential for separating the sugars from bio-oil using simple means. This work points towards a new pathway for making advanced biofuels viz. upgrading pyrolytic sugars from biomass that could compete with enzymatic sugars from biomass.

Covalent Modification of Highly Ordered Pyrolytic Graphite with a Stable Organic Free Radical by Using Diazonium Chemistry.

Science.gov (United States)

Seber, Gonca; Rudnev, Alexander V; Droghetti, Andrea; Rungger, Ivan; Veciana, Jaume; Mas-Torrent, Marta; Rovira, Concepció; Crivillers, Núria

2017-01-26

A novel, persistent, electrochemically active perchlorinated triphenylmethyl (PTM) radical with a diazonium functionality has been covalently attached to highly ordered pyrolytic graphite (HOPG) by electrografting in a single-step process. Electrochemical scanning tunneling microscopy (EC-STM) and Raman spectroscopy measurements revealed that PTM molecules had a higher tendency to covalently react at the HOPG step edges. The cross-section profiles from EC-STM images showed that there was current enhancement at the functionalized areas, which could be explained by redox-mediated electron tunneling through surface-confined redox-active molecules. Cyclic voltammetry clearly demonstrated that the intrinsic properties of the organic radical were preserved upon grafting and DFT calculations also revealed that the magnetic character of the PTM radical was preserved. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Determination of vanadium in sea water by graphite furnace atomic absorption spectrometry with a tube coated with pyrolytic graphite

International Nuclear Information System (INIS)

Shimizu, Tokuo; Sakai, Kaoru

1981-01-01

The trace amount of vanadium in sea water was determined by graphite furnace atomic absorption spectrometry with a tube coated with pyrolytic graphite. To correct the background absorption, a deuterium lamp with a higher-brilliant thermal cathode was used. The sensitivity for vanadium increased 10 -- 20 fold by the use of the tube coated with pyrolytic graphite, and the utility lifetime of the tube was greatly extended. Vanadium(V) - 4-(2-pyridylazo)resorcinol (PAR) complexes were extracted into chloroform as an ion-pair with benzyldimethyltetradecylammonium (Zephiramine) cation alternatively. The sample of sea water, which was made to 0.1 N in sulfuric acid and 0.1% in hydrogen peroxide, was loaded onto the column of Dowex 1-X 4 resin (SO 4 2- -form). Vanadium was then eluted from the resin with 1 N sulfuric acid-0.1% hydrogen peroxide or 1 N hydrochloric acid-0.1% hydrogen peroxide evaporated to dry. After dissolution of the elute in 0.2 N nitric acid, vanadium was extracted. Secondly, the sample of sea water was adjusted to pH 5.0, and loaded onto the column of Chelex-100 resin. Vanadium was eluted from the resin with 2 N ammonia. The above two methods took much time, but the coprecipitation method was not so and recommended for the determination of vanadium in sea water. Vanadium was coprecipitated with iron(III) hydroxide-hydrous titanium(IV) oxide at pH 6.0. The precipitate was digested with nitric acid-hydrogen peroxide. The solution was diluted to 50 ml with water. The resulting solutions were employed to determine the vanadium concentration by the graphite furnace atomic absorption measurement. The trace amounts of vanadium in various kinds of the coastal sea water were determined by the coprecipitation method. (author)

Cf/C composites: correlation between CVI process parameters and Pyrolytic Carbon microstructure

Directory of Open Access Journals (Sweden)

F. Burgio

2014-10-01

Full Text Available Chemical Vapour Infiltration (CVI technique has been long used to produce carbon/carbon composites. The Pyrolytic Carbon (Py-C matrix infiltrated by CVI could have different microstructures, i.e. Rough Laminar (RL, Smooth Laminar (SL or Isotropic (ISO. These matrix microstructures, characterized by different properties, influence the mechanical behaviour of the obtained composites. Tailoring the process parameters, it is possible to direct the infiltration towards a specific Py-C type. However, the factors, influencing the production of a specific matrix microstructure, are numerous and interconnected, e.g. temperature, pressure, flow rates etc. Due to the complexity of the physical and chemical phenomena involved in CVI process, up to now it has not been possible to obtain a general correlation between CVI process parameters and Py–C microstructure. This study is aimed at investigating the relationship between infiltration temperature and the microstructure of obtained Py-C, for a pilot - sized CVI/CVD reactor. Fixing the other process parameters and varying only the temperature, from 1100°C to 1300°C, the Py-C infiltration was performed on fibrous preforms. Polarized light microscopy, with quantitative measurements of average extinction angle (Ae, and Raman spectroscopy were used to characterize the obtained Py-C microstructures

Cf/C composites: correlation between CVI process parameters and Pyrolytic Carbon microstructure

Directory of Open Access Journals (Sweden)

F. Burgio

2014-10-01

Full Text Available Chemical Vapour Infiltration (CVI technique has been long used to produce carbon/carbon composites. The Pyrolytic Carbon (Py-C matrix infiltrated by CVI could have different microstructures, i.e. Rough Laminar (RL, Smooth Laminar (SL or Isotropic (ISO. These matrix microstructures, characterized by different properties, influence the mechanical behaviour of the obtained composites. Tailoring the process parameters, it is possible to direct the infiltration towards a specific Py-C type. However, the factors, influencing the production of a specific matrix microstructure, are numerous and interconnected, e.g. temperature, pressure, flow rates etc. Due to the complexity of the physical and chemical phenomena involved in CVI process, up to now it has not been possible to obtain a general correlation between CVI process parameters and Py–C microstructure. This study is aimed at investigating the relationship between infiltration temperature and the microstructure of obtained Py-C, for a pilot - sized CVI/CVD reactor. Fixing the other process parameters and varying only the temperature, from 1100°C to 1300°C, the Py-C infiltration was performed on fibrous preforms. Polarized light microscopy, with quantitative measurements of average extinction angle (Ae, and Raman spectroscopy were used to characterize the obtained Py-C microstructures.

Erosion of pyrolytic carbon under high surface energy deposition from a pulsed hydrogen plasma

International Nuclear Information System (INIS)

Bolt, H.

1992-01-01

Carbon materials are widely applied as plasma facing materials in nuclear fusion devices and are also the prime candidate materials for the next generation of experimental fusion reactors. During operation these materials are frequently subjected to high energy deposition from plasma disruptions. The erosion of carbon materials is regarded as the main issue governing the operational lifetime of plasma facing components. Laboratory experiments have been performed to study the thermal erosion behaviour of carbon in a plasma environment. In the experiments the surface of pyrolytic carbon specimens was exposed to pulsed energy deposition of up to 3.8 MJ m -2 from a hydrogen plasma. The behaviour of the eroded carbon species in the plasma was measured by time-resolved and space-resolved spectroscopy. Intense line radiation of ionic carbon has been measured in the plasma in front of the carbon surface. The results show that the eroded carbon is immediately ionised in the vicinity of the material surface, with a fraction of it being ionised to the double-charged state. (Author)

Determining the phonon energy of highly oriented pyrolytic graphite by scanning tunneling microscope light emission spectroscopy

Science.gov (United States)

Uehara, Yoichi; Michimata, Junichi; Watanabe, Shota; Katano, Satoshi; Inaoka, Takeshi

2018-03-01

We have investigated the scanning tunneling microscope (STM) light emission spectra of isolated single Ag nanoparticles lying on highly oriented pyrolytic graphite (HOPG). The STM light emission spectra exhibited two types of spectral structures (step-like and periodic). Comparisons of the observed structures and theoretical predictions indicate that the phonon energy of the ZO mode of HOPG [M. Mohr et al., Phys. Rev. B 76, 035439 (2007)] can be determined from the energy difference between the cutoff of STM light emission and the step in the former structure, and from the period of the latter structure. Since the role of the Ag nanoparticles does not depend on the substrate materials, this method will enable the phonon energies of various materials to be measured by STM light emission spectroscopy. The spatial resolution is comparable to the lateral size of the individual Ag nanoparticles (that is, a few nm).

Thermal behavior and pyrolytic degradation kinetics of polymeric mixtures from waste packaging plastics

Directory of Open Access Journals (Sweden)

R. Tuffi

2018-01-01

Full Text Available The thermal behavior and pyrolytic kinetic analysis of main waste polymers (polypropylene (PP, polyethylene film (PE, poly(ethylene terephthalate (PET, polystyrene (PS and three synthetic mixtures representing commingled postconsumer plastics wastes (CPCPWs output from material recovery facilities were studied. Thermogravimetry (TG pyrolysis experiments revealed that the thermal degradation of single polymers and the synthetic mixture enriched in PP occurred in one single step. The other two mixtures underwent a two-consecutive, partially overlapping degradation steps, whose peaks related to the first-order derivative of TG were deconvoluted into two distinct processes. Further TG experiments carried out on binary mixtures (PS/PP, PET/PP, PET/PEfilm and PP/PEfilm showed a thermal degradation reliance on composition, structure and temperatures of single polymer components. A kinetic analysis was made for each step using the Kissinger-Akahira-Sunose (KAS method, thus determining almost constant activation energy (Ea for pyrolysis of PS, PET, PP and PE film in the range 0.25<α<0.85, unlike for pyrolysis of CPCPWs, with particular reference to CPCPW1 and the second step of CPCPW2 and CPCPW3, both ascribable to degradation of PP and PE film. To account for the reliability of these values the integral isoconversional modified method developed by Vyazovkin was also applied.

[The expression and significance of VIP and its receptor in the cochlea of different degrees of chronic alcoholism rats].

Science.gov (United States)

Feng, Jing; Liu, Haibing

2015-07-01

To determine whether chronic alcoholism alters the expression levels of Vasoactive intestinal polypeptide (VIP) and its receptor (VIPR1) in the cochlea of chronic alcoholism rats. We measured their expression levels in 30 SD rats, in which we created models of different degrees of chronic alcoholism. We investigated the presence of the mRNA of VIP in the cochlea of chronic alcoholism rats and controls by reverse transcription-polymerase chain reaction (RT-PCR) method. We investigated the presence of proteins of VIPR1 in poisoned rats and controls by western blot. We also evaluated the local distribution of VIP cells by immunohistochemistry. We found that the levels of VIP and VIPR1 were downregulated in the chronic alcoholism groups compared to the controls group. The differences in some expression levels were significant different between chronic alcoholism rats and control rats. Moreover, at different degrees of alcohol poisoning in rats, the contents of VIP and VIPR1 differed. Decreased levels of VIP and VIPR1 were detected in the deep chronic alcoholism group compared to the group with low-degree poisoning (P 0.05). These results suggest that VIP and VIPR1 play an important role in the auditory function in rats with chronic alcoholism. Chronic alcoholism may cause a peptide hormone secretion imbalance in the auditory system, eventually leading to hearing loss.

Spectroscopic investigation of the wettability of multilayer graphene using highly ordered pyrolytic graphite as a model material.

Science.gov (United States)

Ashraf, Ali; Wu, Yanbin; Wang, Michael C; Aluru, Narayana R; Dastgheib, Seyed A; Nam, SungWoo

2014-11-04

We report the intrinsic water contact angle (WCA) of multilayer graphene, explore different methods of cleaning multilayer graphene, and evaluate the efficiency of those methods on the basis of spectroscopic analysis. Highly ordered pyrolytic graphite (HOPG) was used as a model material system to study the wettability of the multilayer graphene surface by WCA measurements. A WCA value of 45° ± 3° was measured for a clean HOPG surface, which can serve as the intrinsic WCA for multilayer graphene. A 1 min plasma treatment (100 W) decreased the WCA to 6°, owing to the creation of surface defects and functionalization by oxygen-containing groups. Molecular dynamics simulations of water droplets on the HOPG surface with or without the oxygen-containing defect sites confirmed the experimental results. Heat treatment at near atmospheric pressure and wet chemical cleaning methods using hydrofluoric acid and chloroform did not change the WCA significantly. Low-pressure, high-temperature annealing under argon and hydrogen reduced the WCA to 54°, close to the intrinsic WCA of HOPG. Raman spectroscopy and atomic force microscopy did not show any significant change for the HOPG surface after this treatment, confirming low-pressure, high-temperature annealing as an effective technique to clean multilayer graphene without damaging the surface. Time-of-flight secondary ion mass spectrometry indicated the existence of hydrocarbon species on the surface of the HOPG sample that was exposed to air for <5 min and the absence of these impurities in the bulk. X-ray photoelectron spectroscopy analyses of the sample surfaces after the different cleaning techniques were performed to correlate the WCA to the surface chemistry. X-ray photoelectron spectroscopy results revealed that the WCA value changed drastically, depending on the amounts of oxygen-containing and hydrocarbon-containing groups on the surface.

Comparison of two-stage thermophilic (68 degrees C/55 degrees C) anaerobic digestion with one-stage thermophilic (55 degrees C) digestion of cattle manure.

Science.gov (United States)

Nielsen, H B; Mladenovska, Z; Westermann, P; Ahring, B K

2004-05-05

A two-stage 68 degrees C/55 degrees C anaerobic degradation process for treatment of cattle manure was studied. In batch experiments, an increase of the specific methane yield, ranging from 24% to 56%, was obtained when cattle manure and its fractions (fibers and liquid) were pretreated at 68 degrees C for periods of 36, 108, and 168 h, and subsequently digested at 55 degrees C. In a lab-scale experiment, the performance of a two-stage reactor system, consisting of a digester operating at 68 degrees C with a hydraulic retention time (HRT) of 3 days, connected to a 55 degrees C reactor with 12-day HRT, was compared with a conventional single-stage reactor running at 55 degrees C with 15-days HRT. When an organic loading of 3 g volatile solids (VS) per liter per day was applied, the two-stage setup had a 6% to 8% higher specific methane yield and a 9% more effective VS-removal than the conventional single-stage reactor. The 68 degrees C reactor generated 7% to 9% of the total amount of methane of the two-stage system and maintained a volatile fatty acids (VFA) concentration of 4.0 to 4.4 g acetate per liter. Population size and activity of aceticlastic methanogens, syntrophic bacteria, and hydrolytic/fermentative bacteria were significantly lower in the 68 degrees C reactor than in the 55 degrees C reactors. The density levels of methanogens utilizing H2/CO2 or formate were, however, in the same range for all reactors, although the degradation of these substrates was significantly lower in the 68 degrees C reactor than in the 55 degrees C reactors. Temporal temperature gradient electrophoresis profiles (TTGE) of the 68 degrees C reactor demonstrated a stable bacterial community along with a less divergent community of archaeal species. Copyright 2004 Wiley Periodicals, Inc.

Synergistic methane formation on pyrolytic graphite due to combined H+ ion and H0 atom impact

International Nuclear Information System (INIS)

Haasz, A.A.; Davis, J.W.; Auciello, O.; Strangeby, P.C.; Vietzke, E.; Flaskamp, K.; Philipps, V.

1986-06-01

Exposure of graphite to multispecies hydrogenic impact, as is the case in tokamaks, could lead to synergistic mechanisms resulting in an enhancement of methane formation, and consequently in increased carbon erosion. We present results obtained in controlled experiments in our laboratories in Toronto and Juelich for the synergistic methane production due to combined sub-eV H 0 atoms and energetic H + ion impact on pyrolytic graphite. Flux densities were 10 14 -2x10 16 H 0 /cm 2 s for the sub-eV H 0 atoms and 6x10 12 -5x10 15 H + /cm 2 for H + ions of 300 eV to 2.5 keV energy. Synergistic factors (defined as the ratio of methane formation rate due to combined H 0 and H + fluxes to the sum of the formation rates due to separate species impact) ranged from about 1.5-15 for the experimental parameters used. In addition, a spectrum of formed hydrocarbons in the synergistic reaction of H + and H 0 on graphite is presented

Electrochemical modification of a pyrolytic graphite sheet for improved negative electrode performance in the vanadium redox flow battery

Science.gov (United States)

Kabir, Humayun; Gyan, Isaiah O.; Francis Cheng, I.

2017-02-01

The vanadium redox flow battery is a promising technology for buffering renewable energies. It is recognized that negative electrode is the limitation in this device where there are problems of slow heterogeneous electron transfer (HET) of V3+/2+ and parasitic H2 evolution. Any methods aimed at addressing one of these barriers must assess the effects on the other. We examine electrochemical enhancement of a common commercially available material. Treatment of Panasonic pyrolytic graphite sheets is through oxidation at 2.1 V vs. Ag/AgCl for 1 min in 1 M H2SO4. This increases the standard HET rate for V3+/2+ from 3.2 × 10-7 to 1 × 10-3 cm/s, one of the highest in literature and shifts voltammetric reductive peak potential from -1.0 V to -0.65 V in 50 mM V3+ in 1 M H2SO4. Infrared analysis of the surfaces indicates formation of Csbnd OH, Cdbnd O, and Csbnd O functionalities. These groups catalyze HET with V3+/2+ as hypothesized by Skyllas-Kasacos. Also of significance is that electrode modification decreases the fraction of the current directed towards H2 evolution. This proportion decreases by two orders of a magnitude from 12% to 0.1% as measured at the respective voltammetric peak potentials of -1.0 V (pristine) and -0.65 V (modified).

Degree-degree correlations in random graphs with heavy-tailed degrees

NARCIS (Netherlands)

Hofstad, van der R.W.; Litvak, N.

2014-01-01

Mixing patterns in large self-organizing networks, such as the Internet, the World Wide Web, social, and biological networks are often characterized by degree-degree dependencies between neighboring nodes. In assortative networks, the degree-degree dependencies are positive (nodes with similar

Degree-Degree Dependencies in Random Graphs with Heavy-Tailed Degrees

NARCIS (Netherlands)

van der Hofstad, Remco; Litvak, Nelly

2014-01-01

Mixing patterns in large self-organizing networks, such as the Internet, the World Wide Web, social, and biological networks are often characterized by degree-degree dependencies between neighboring nodes. In assortative networks, the degree-degree dependencies are positive (nodes with similar

Online time-differential perturbed angular correlation study with an 19O beam - Residence sites of oxygen atoms in highly oriented pyrolytic graphite

International Nuclear Information System (INIS)

Sato, W.; Ueno, H.; Watanabe, H.; Miyoshi, H.; Yoshimi, A.; Kameda, D.; Ito, T.; Shimada, K.; Kaihara, J.; Suda, S.; Kobayashi, Y.; Shinohara, A.; Ohkubo, Y.; Asahi, K.

2008-01-01

The online time-differential perturbed angular correlation (TDPAC) method was applied to a study of the physical states of a probe 19 F, the β - decay product of 19 O (t 1/2 = 26.9 s), implanted in highly oriented pyrolytic graphite. The observed magnitude of the electric field gradient at the probe nucleus, |V zz | = 2.91(17) x 10 22 V m -2 , suggests that the incident 19 O atoms are stabilized at an interlayer position with point group C 3v . Exhibiting observed TDPAC spectra having a clear sample-to-detector configuration dependence, we demonstrate the applicability of the present online method with a short-lived radioactive 19 O beam

Online time-differential perturbed angular correlation study with an 19O beam - Residence sites of oxygen atoms in highly oriented pyrolytic graphite

Science.gov (United States)

Sato, W.; Ueno, H.; Watanabe, H.; Miyoshi, H.; Yoshimi, A.; Kameda, D.; Ito, T.; Shimada, K.; Kaihara, J.; Suda, S.; Kobayashi, Y.; Shinohara, A.; Ohkubo, Y.; Asahi, K.

2008-01-01

The online time-differential perturbed angular correlation (TDPAC) method was applied to a study of the physical states of a probe 19F, the β- decay product of 19O (t1/2 = 26.9 s), implanted in highly oriented pyrolytic graphite. The observed magnitude of the electric field gradient at the probe nucleus, ∣Vzz∣ = 2.91(17) × 1022 V m-2, suggests that the incident 19O atoms are stabilized at an interlayer position with point group C3v. Exhibiting observed TDPAC spectra having a clear sample-to-detector configuration dependence, we demonstrate the applicability of the present online method with a short-lived radioactive 19O beam.

Pyrolytic graphite as an efficient second-order neutron filter at tuned positions of boundary crossing

International Nuclear Information System (INIS)

Adib, M.; Abdel Kawy, A.; Habib, N.; El Mesiry, M.

2010-01-01

An investigation of pyrolytic graphite (PG) crystal as an efficient second order neutron filter at tuned boundary crossings has been carried out. The neutron transmission through PG crystal at these tuned crossing points as a function of first- and second-order wavelengths were calculated in terms of PG mosaic spread and thickness. The filtering features of PG crystals at these tuned boundary crossings were deduced. It was shown that, there are a large number of tuned positions at double and triple boundary crossings of the curves (hkl) are very promising as tuned filter positions. However, only fourteen of them are found to be most promising ones. These tuned positions are found to be within the neutron wavelengths from 0.133 up to 0.4050 nm. A computer package GRAPHITE has been used in order to provide the required calculations in the whole neutron wavelength range in terms of PG mosaic spread and its orientation with respect to incident neutron beam direction. It was shown that 0.5 cm thick PG crystal with angular mosaic spread of 2 0 is sufficient to remove 2nd-order neutrons at the wavelengths corresponding to the positions of the intersection boundaries curves (hkl).

Reactions of modulated molecular beams with pyrolytic graphite IV. Water vapor

International Nuclear Information System (INIS)

Olander, D.R.; Acharya, T.R.; Ullman, A.Z.

1977-01-01

The reaction of water vapor with the prism plane face of anneal pyrolytic graphite was investigated by modulated molecular beam--mass spectrometry methods. The equivalent water vapor pressure of the beam was approx.2 x 10 -5 Torr and the graphite temperature was varied from 300 to 2500 0 K. The mechanism was deduced from three types of experiments: isotope exchange utilizing modulated H 2 O and steady D 2 O beams; measurements of the phase difference between H 2 O and neon reflected from the surface from a mixed primary beam of these species; and reaction of a modulated H 2 O beam to produce CO and H 2 . Based upon the isotope exchange experiments chemisorption of water on graphite was found to be dissociative and reversible. Incident water molecules chemisorbed with a sticking probability of 0.15 +- 0.02 to form the complexes C--OH and C--H. Recombination of the surface complexes reverses the adsorption step and is responsible for the isotope exchange properties of the graphite surface. This process is unactivated. Reaction to produce CO and H 2 also results from collisions of the primary surface complexes, but this step has an activation energy of 170 kJ/mole. This reaction yields bound complexes tentatively identified as C--O and H--C--H, which then decompose to produce the stable reaction products. All of the above steps exhibit characteristic times on the order of milliseconds, and are therefore detectable by the modulated beam method. All surface intermediates are strongly affected by solution and diffusion in the bulk of the solid

Effect of oxygen and hydrogen on microstructure of pyrolytic carbon deposited from thermal decomposition of methane and ethanol

Science.gov (United States)

Ren, Biyun; Zhang, Shouyang; He, LiQun; Gu, Shengyue

2018-05-01

Chemical vapor infiltration (CVI) is the most extensive industrial preparation of carbon/carbon (C/C) composites. Precursor affects the CVI process considerably. In the present study, using carbon fiber bundles as preforms, methane and ethanol as precursors, the C/C composites were densified by decomposition of various gases in CVI. The thickness and texture of deposited pyrolytic carbon (PyC) were characterized by polarized light microscopy (PLM). The microstructure of PyC was analyzed by Raman spectroscopy. The morphologies of PyC were characterized by scanning electron microscopy (SEM). The composition of PyC was detected by X-ray photoelectron spectroscopy (XPS). Adding hydrogen in methane precursor resulted in a sharp decrease in the deposition rate and texture of PyC. Mixture of methane and ethanol as the precursor improved the deposition rate and texture remarkably. Besides, O element in ethanol was not remained as a constitution of PyC, and it was removed before the formation of PyC.

Reactivity of hydrogen with uranium in the presence of Pt

International Nuclear Information System (INIS)

Balooch, M.; Siekhaus, W.J.

1997-07-01

The surface-reaction of di-hydrogen with uranium in the presence of Pt clusters has been studied using scanning tunneling microscopy (STM). Uranium was deposited on highly oriented pyrolytic graphite (HOPG) and annealed at temperatures up to 1200 degrees C to obtain atomically pyrolytic flat surfaces. Pt clusters were then formed using evaporation from a Pt source onto the surface and subsequent annealing. Hydrogen mainly attacked uranium in the vicinity of Pt clusters and formed hydride. The hydride formation probability is almost constant at 2.3x10 -4 over the range of exposures studied

Effects of Processing Parameters on the Density and Microstructure of Pyrolytic Carbon

International Nuclear Information System (INIS)

Kim, Weon Ju; Park, Jeong Nam; Park, Jong Hoon; Cho, Moon Sung; Lee, Young Woo; Park, Ji Yeon

2007-01-01

Chemical vapor deposition (CVD) of pyrolytic carbon (PyC) and silicon carbide (SiC) has been applied to TRISO-coated fuel particles for high-temperature gas-cooled reactors (HTGR). The porous PyC coating layer, called the buffer layer, attenuates fission recoils and provides void volume for gaseous fission products and carbon monoxide. The inner PyC layer acts as a containment to gaseous products. The outer PyC layer protects the SiC coating layer by inducing a compressive stress and provides chemical compatibility with a graphite matrix in the fuel compact. The PyC layers undergo shrinkage due to neutron irradiation, affecting the design and modeling of fuel particles. Because the dimensional change of PyC depends on the detailed microstructure of PyC, it differs from one fabrication route to another one. This requires a new design of irradiation experiment applicable to spherical objects and leads to an international collaborative work called PYCASSO (PYrocarbon irradiation for Creep And Swelling/Shrinkage of Objects). KAERI proposed four different types of PyC layers coated on ZrO 2 particles, buffer with a density of 1.0 and dense PyCs with densities of 1.7, 1.9 and 2.1 g/cm 3 , for the irradiation experiment. In this study, we fabricated PyC-coated particles with various coating densities for supporting the PYCASSO experiment. We also investigated effects of processing parameters such as temperature, hydrocarbon concentration and gas flow rate on the density and microstructure of the PyC layer

Co-pyrolysis behaviour and kinetic of two typical solid wastes in China and characterisation of activated carbon prepared from pyrolytic char.

Science.gov (United States)

Ma, Yuhui; Niu, Ruxuan; Wang, Xiaona; Wang, Qunhui; Wang, Xiaoqiang; Sun, Xiaohong

2014-11-01

This is the first study on the co-pyrolysis of spent substrate of Pleurotus ostreatus and coal tar pitch, and the activated carbon prepared from the pyrolytic char. Thermogravimetry (TG) analysis was carried out taking spent substrate, coal tar pitch and spent substrate-coal tar pitch mixture. The activation energies of pyrolysis reactions were obtained via the Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose methods. The kinetic models were determined by the master-plots method. The activated carbons were characterised by N2-adsorption, Fourier transform infrared spectroscopy and X-ray diffraction. Experimental results demonstrated a synergistic effect happened during co-pyrolysis, which was characterised by a decreased maximum decomposition rate and an enhanced char yield. The average activation energies of the pyrolysis reactions of spent substrate, coal tar pitch and the mixture were 115.94, 72.92 and 94.38 kJ mol(-1) for the Flynn-Wall-Ozawa method, and 112.17, 65.62 and 89.91 kJ mol(-1) for the Kissinger-Akahira-Sunose method. The reaction model functions were f(α) = (1-α)(3.42), (1-α)(1.72) and (1-α)(3.07) for spent substrate, coal tar pitch and the mixture, respectively. The mixture char-derived activated carbon had a Brunauer-Emmett-Teller surface area up to 1337 m(2) g(-1) and a total pore volume of 0.680 cm(3) g(-1). Mixing spent substrate with coal tar pitch led to the creation of more micropores and a higher surface area compared with the single spent substrate and coal tar pitch char. Also, the mixture char-derived activated carbon had a higher proportion of aromatic stacking. This study provides a reference for the utilisation of spent substrate and coal tar pitch via co-pyrolysis, and their pyrolytic char as a promising precursor of activated carbon. © The Author(s) 2014.

Surface modification of highly oriented pyrolytic graphite by reaction with atomic nitrogen at high temperatures

International Nuclear Information System (INIS)

Zhang Luning; Pejakovic, Dusan A.; Geng Baisong; Marschall, Jochen

2011-01-01

Dry etching of {0 0 0 1} basal planes of highly oriented pyrolytic graphite (HOPG) using active nitridation by nitrogen atoms was investigated at low pressures and high temperatures. The etching process produces channels at grain boundaries and pits whose shapes depend on the reaction temperature. For temperatures below 600 deg. C, the majority of pits are nearly circular, with a small fraction of hexagonal pits with rounded edges. For temperatures above 600 deg. C, the pits are almost exclusively hexagonal with straight edges. The Raman spectra of samples etched at 1000 deg. C show the D mode near 1360 cm -1 , which is absent in pristine HOPG. For deep hexagonal pits that penetrate many graphene layers, neither the surface number density of pits nor the width of pit size distribution changes substantially with the nitridation time, suggesting that these pits are initiated at a fixed number of extended defects intersecting {0 0 0 1} planes. Shallow pits that penetrate 1-2 graphene layers have a wide size distribution, which suggests that these pits are initiated on pristine graphene surfaces from lattice vacancies continually formed by N atoms. A similar wide size distribution of shallow hexagonal pits is observed in an n-layer graphene sample after N-atom etching.

Thermal stability of carboxylic acid functionality in coal; Sekitanchu ni sonzaisuru karubokishiruki no netsubunkai kyodo

Energy Technology Data Exchange (ETDEWEB)

Tsutsumi, Y.; Aida, T. [Kinki University, Osaka (Japan). Faculty of Engineering

1996-10-28

Carboxyl in coal was focused in discussing its pyrolytic behavior while tracking change of its absolute amount relative to the heating temperatures. A total of four kinds of coals, consisting of two kinds brown coals, sub-bituminous coal and bituminous coal were used. Change in the absolute amount of carboxyl due to heating varies with coalification degree. Decomposition starts in the bituminous coal from around 300{degree}C, and is rapidly accelerated when 400{degree}C is exceeded. Carboxyls in brown coals exist two to three times as much as those in bituminous and sub-bituminous coals, of which 40% is decomposed at a temperature as low as about 300{degree}C. Their pyrolytic behavior at temperatures higher than 400{degree}C resembles that of the bituminous coal. Carboxyls consist of those easy to decompose and difficult to decompose. Aromatic and aliphatic carboxylic acids with simple structure are stable at temperatures lower than 300{degree}C, and decompose abruptly from about 400{degree}C, hence their behavior resembles that of carboxyls in bituminous and sub-bituminous coals. Structure of low-temperature decomposing carboxyls in brown coals is not known, but it is assumed that humic acid originated from natural materials remains in the structure. 4 refs., 3 figs., 1 tab.

Tritium permeation behavior through pyrolytic carbon in tritium production using high-temperature gas-cooled reactor for fusion reactors

Directory of Open Access Journals (Sweden)

H. Ushida

2016-12-01

Full Text Available Under tritium production method using a high-temperature gas-cooled reactor loaded Li compound, Li compound has to be coated by ceramic materials in order to suppress the spreading of tritium to the whole reactor. Pyrolytic carbon (PyC is a candidate of the coating material because of its high resistance for gas permeation. In this study, hydrogen permeation experiments using a PyC-coated isotropic graphite tube were conducted and hydrogen diffusivity, solubility and permeability were evaluated. Tritium permeation behavior through PyC-coated Li compound particles was simulated by using obtained data. Hydrogen permeation flux through PyC in a steady state is proportional to the hydrogen pressure and is larger than that through Al2O3 which is also candidate coating material. However, total tritium leak within the supposed reactor operation period through the PyC-coated Li compound particles is lower than that through the Al2O3-coated ones because the hydrogen absorption capacity in PyC is considerably larger than that in Al2O3.

Importance of small-degree nodes in assortative networks with degree-weight correlations

Science.gov (United States)

Ma, Sijuan; Feng, Ling; Monterola, Christopher Pineda; Lai, Choy Heng

2017-10-01

It has been known that assortative network structure plays an important role in spreading dynamics for unweighted networks. Yet its influence on weighted networks is not clear, in particular when weight is strongly correlated with the degrees of the nodes as we empirically observed in Twitter. Here we use the self-consistent probability method and revised nonperturbative heterogenous mean-field theory method to investigate this influence on both susceptible-infective-recovered (SIR) and susceptible-infective-susceptible (SIS) spreading dynamics. Both our simulation and theoretical results show that while the critical threshold is not significantly influenced by the assortativity, the prevalence in the supercritical regime shows a crossover under different degree-weight correlations. In particular, unlike the case of random mixing networks, in assortative networks, the negative degree-weight correlation leads to higher prevalence in their spreading beyond the critical transmissivity than that of the positively correlated. In addition, the previously observed inhibition effect on spreading velocity by assortative structure is not apparent in negatively degree-weight correlated networks, while it is enhanced for that of the positively correlated. Detailed investigation into the degree distribution of the infected nodes reveals that small-degree nodes play essential roles in the supercritical phase of both SIR and SIS spreadings. Our results have direct implications in understanding viral information spreading over online social networks and epidemic spreading over contact networks.

Thermal desorption spectroscopy of pyrolytic graphite cleavage faces after keV deuterium irradiation at 330-1000 K

International Nuclear Information System (INIS)

Gotoh, Y.; Yamaki, T.; Tokiguchi, K.

1992-01-01

Thermal desorption spectroscopy (TDS) measurements were made on D 2 and CD 4 from surface layers of pyrolytic graphite cleavage faces after 3 keV D + 3 irradiation to 1.5 x 10 18 D/cm 2 at irradiation temperatures from 330 to 1000 K. Thermal desorption of both D 2 and CD 4 was observed to rise simultaneously at around 700 K. The D 2 peak was found at T m = 900-1000 K, while the CD 4 peak appeared at a lower temperature, 800-840 K. The T m for the D 2 TDS increased, while that for the CD 4 decreased with increasing irradiation temperature. These results obviously indicate that the D 2 desorption is detrapping/recombination limited, while the CD 4 desorption is most likely to be diffusion limited. The amount of thermally desorbed D 2 after the D + irradiation was observed to monotonously decrease as the irradiation temperature was increased from 330 to 1000 K. These tendencies agreed with previous results for the irradiation temperature dependencies of both C1s chemical shift (XPS) and the interlayer spacing, d 002 (HRTEM), on the graphite basal face. (orig.)

Investigation on the recombination kinetics of the pyrolytic free-radicals in the irradiated polyimide

International Nuclear Information System (INIS)

Sun Chengyue; Wu Yiyong; Yue Long; Shi Yaping; Xiao Jingdong

2012-01-01

Highlights: ► Free radicals behavior was exposure during the irradiation and anneal during the post storage. ► Both of the recombination and oxygen reaction affect the post-annealing evolution of free radicals. ► The activation energy and the surface reaction rate were calculated by the analysis of the free radical anneal process. - Abstract: The free radical behavior of 60 and 110 keV proton-irradiated polyimide were investigated using electron paramagnetic resonance measurements. The results indicate that during proton irradiation, a type of pyrolytic carbon free radical was formed with a g value of 2.0025. The radical population was found, after proton irradiation to decrease in a combination of an exponential and linear modes with an annealing time in the range of 50–120 °C. The exponential part indicated a radical recombination process while the linear part is due to the reaction of the radical with the ambient. Using the annealing results, the recombination activation energy of the radicals was determined as 12.4 ± 0.2 and 17.6 ± 0.2 kJ/mol for 60 and 110 keV irradiated polyimide, respectively, with a surface reaction rate of about 0.02/h. It is possible that the kinetic study presented here is used as one of the criteria for predicting the optical properties of polyimide material in spacecraft. The mechanism of the free radical evolution will be discussed in this paper.

Wafer-scale laser pantography: Fabrication of n-metal-oxide-semiconductor transistors and small-scale integrated circuits by direct-write laser-induced pyrolytic reactions

International Nuclear Information System (INIS)

McWilliams, B.M.; Herman, I.P.; Mitlitsky, F.; Hyde, R.A.; Wood, L.L.

1983-01-01

A complete set of processes sufficient for manufacture of n-metal-oxide-semiconductor (n-MOS) transistors by a laser-induced direct-write process has been demonstrated separately, and integrated to yield functional transistors. Gates and interconnects were fabricated of various combinations of n-doped and intrinsic polysilicon, tungsten, and tungsten silicide compounds. Both 0.1-μm and 1-μm-thick gate oxides were micromachined with and without etchant gas, and the exposed p-Si [100] substrate was cleaned and, at times, etched. Diffusion regions were doped by laser-induced pyrolytic decomposition of phosphine followed by laser annealing. Along with the successful manufacture of working n-MOS transistors and a set of elementary digital logic gates, this letter reports the successful use of several laser-induced surface reactions that have not been reported previously

Role of iron catalyst impregnated by solvent swelling method in pyrolytic removal of coal nitrogen

Energy Technology Data Exchange (ETDEWEB)

Hayashi, J.; Kusakabe, K.; Morooka, S.; Nielsen, M.; Furimsky, E. [Kyushu University, Fukuoka (Japan). Dept. of Chemical Science and Technology

1995-11-01

Organometallic iron precursors, ferrocene and ferric acetate, were impregnated into Illinois No. 6 (IL), Wyoming (WY) and Yallourn (YL) coals by solvent swelling technique in THF, ethanol, and a THF/ethanol binary solvent. Then iron-impregnated coals were pyrolyzed in a flow of helium at atmospheric pressure in a fixed bed and a thermobalance. Conversion of coal nitrogen to N{sub 2} was 20, 38 and 30% respectively, for original IL, WY, and YL coals. Iron formed from both precursors lowered the onset temperature of N{sub 2} evolution by 20-100{degree}C. When ferrocene was impregnated in coals at a concentration of 1.7-1.8 wt% as Fe, nitrogen conversion was increased to 52, 71 and 68% for IL, WY and YL coals, respectively. Ferric acetate impregnated into IL coal from THF/ethanol solution increased the nitrogen conversion much more than that from ethanol solution. The expansion of microporous coal structure by the swelling was essential for better dispersion of the catalyst precursor. The evolution of HCN as well as NH{sub 3} was effectively suppressed above 600{degree}C by the presence of iron but not influenced significantly by combinations of catalyst precursors and solvents. The increase in N{sub 2} yield was compensated by the decrease in nitrogen emitted as HCN and NH{sub 3} and in tar and char. The increase in CO evolution from the iron-impregnated IL coal at 600-800{degree}C was explained by catalytic rearrangement of aromatic structure of char, accompanying the removal of nitrogen as N{sub 2}. In a range of 600-750{degree}C, the evolution of CO as well as N{sub 2} from the other coals increased remarkably with a significant decrease in CO{sub 2} gasification in char microproes. 32 refs., 9 figs., 3 tabs.

Degree-degree correlations in directed networks with heavy-tailed degrees

NARCIS (Netherlands)

van der Hoorn, W.L.F.; Litvak, Nelli

2013-01-01

In network theory, Pearson's correlation coefficients are most commonly used to measure the degree assortativity of a network. We investigate the behavior of these coefficients in the setting of directed networks with heavy-tailed degree sequences. We prove that for graphs where the in- and

Degree-degree dependencies in directed networks with heavy-tailed degrees

NARCIS (Netherlands)

van der Hoorn, W.L.F.; Litvak, Nelly

2015-01-01

In network theory, Pearson’s correlation coefficients are most commonly used to measure the degree assortativity of a network. We investigate the behavior of these coefficients in the setting of directed networks with heavy-tailed degree sequences. We prove that for graphs where the in- and

Electrochemical formation and characterization of Au nanostructures on a highly ordered pyrolytic graphite surface

International Nuclear Information System (INIS)

Arroyo Gómez, José J.; Zubieta, Carolina; Ferullo, Ricardo M.; García, Silvana G.

2016-01-01

Graphical abstract: - Highlights: • The electrodeposition of Au on HOPG tends to follow the response predicted for a 3D instantaneous nucleation mechanism in the potential range considered. • By choosing suitable nucleation and growth pulses, one-dimensional deposits were possible, preferentially located on step edges of the HOPG substrate. • Quantum-mechanical calculations confirmed the tendency of Au atoms to join selectively on the HOPG step edges, at the early stages of Au electrodeposition. - Abstract: The electrochemical formation of Au nanoparticles on a highly ordered pyrolytic graphite (HOPG) substrate using conventional electrochemical techniques and ex-situ AFM is reported. From the potentiostatic current transients studies, the Au electrodeposition process on HOPG surfaces was described, within the potential range considered, by a model involving instantaneous nucleation and diffusion controlled 3D growth, which was corroborated by the microscopic analysis. Initially, three-dimensional (3D) hemispherical nanoparticles distributed on surface defects (step edges) of the substrate were observed, with increasing particle size at more negative potentials. The double potential pulse technique allowed the formation of rounded deposits at low deposition potentials, which tend to form lines of nuclei aligned in defined directions leading to 3D ordered structures. By choosing suitable nucleation and growth pulses, one-dimensional (1D) deposits were possible, preferentially located on step edges of the HOPG substrate. Quantum-mechanical calculations confirmed the tendency of Au atoms to join selectively on surface defects, such as the HOPG step edges, at the early stages of Au electrodeposition.

Multivariate correlation analysis of eye cyclotorsion degree in corneal refractive surgery

Directory of Open Access Journals (Sweden)

Xiao-Guang Niu

2015-06-01

Full Text Available AIM: To explore the correlation between eye cyclotorsion degrees and patient's age, gender, diopter and other factors in corneal refractive surgery. METHODS: A total of 762 wavefront-guided LASIK patients with 1524 eyes were retrospectively analyzed from January 2010 to December 2013 in our hospital. Iris recognition was accomplished successfully and eye cyclotorsion degrees were recorded intraoperatively for all the patients. The correlations between eye cyclotorsion degrees and patient's age, gender, different eye, diopter and the dominant eye or not were statistically analyzed. In which correlation analysis was used to analyze the relationship between eye cyclotorsion degrees and age and diopter, while the correlations with gender, different eye and the dominant eye or not were analyzed using t-test.RESULTS: The eye cyclotorsion degrees of patients were 0 to 9.7 degrees with an average of 3.08±2.22 degrees. Amongst the average cyclotorsion of 444 men with 888 eyes were 3.05±2.26 degrees, 318 women with 636 eyes were 3.12±2.15 degrees and there were no significant differences(t=1.905, P=0.168. The average age of all the patients was 22.6±5.4y. No significant correlation was found between cyclotorsion degrees and age(r=-0.012, P=0.748. The mean spherical equivalent was -4.76±1.77 degrees, and there was no significant correlation between the eye cyclotorsion degrees and spherical equivalent(r=0.017, P=0.633. The mean cylinder was -0.60±0.64 degrees of no significant correlation with eye cyclotorsion degrees(r=-0.004, P=0.910. The cyclotorsion of dominant eyes of all the patients was 3.0±2.17 degrees, and the non-dominant eyes were 3.11±2.12 degrees. No significant differences were found(t=-0.521,P=0.603. CONCLUSION: The eye cyclotorsion degrees occurred in LASIK surgery had no correlation with age, gender, different eye, diopter and the dominant eye or not.

Imparting improvements in electrochemical sensors: evaluation of different carbon blacks that give rise to significant improvement in the performance of electroanalytical sensing platforms

International Nuclear Information System (INIS)

Vicentini, Fernando Campanhã; Ravanini, Amanda E.; Figueiredo-Filho, Luiz C.S.; Iniesta, Jesús; Banks, Craig E.; Fatibello-Filho, Orlando

2015-01-01

Three different carbon black materials have been evaluated as a potential modifier, however, only one demonstrated an improvement in the electrochemical properties. The carbon black structures were characterised with SEM, XPS and Raman spectroscopy and found to be very similar to that of amorphous graphitic materials. The modifications utilised were constructed by three different strategies (using ultrapure water, chitosan and dihexadecylphosphate). The fabricated sensors are electrochemically characterised using N,N,N',N'-tetramethyl-para-phenylenediamine and both inner-sphere and outer-sphere redox probes, namely potassium ferrocyanide(II) and hexaammineruthenium(III) chloride, in addition to the biologically relevant and electroactive analytes, dopamine (DA) and acetaminophen (AP). Comparisons are made with an edge-plane pyrolytic graphite and glassy-carbon electrode and the benefits of carbon black implemented as a modifier for sensors within electrochemistry are explored, as well as the characterisation of their electroanalytical performances. We reveal significant improvements in the electrochemical performance (excellent sensitivity, faster heterogeneous electron transfer rate (HET)) over that of a bare glassy-carbon and edge-plane pyrolytic graphite electrode and thus suggest that there are substantial advantages of using carbon black as modifier in the fabrication of electrochemical based sensors. Such work is highly important and informative for those working in the field of electroanalysis where electrochemistry can provide portable, rapid, reliable and accurate sensing protocols (bringing the laboratory into the field), with particular relevance to those searching for new electrode materials

Method of pyrolytic decomposition and coking of a mixture of finely distributed solid or semisolid carbonaceous material and hydrocarbon oils

Energy Technology Data Exchange (ETDEWEB)

1933-09-09

A method of pyrolytic decomposition and coking of a mixture of finely distributed of solid or semi-solid carbonaceous material and hydrocarbon oils is disclosed whereby the mixture is exposed to a decomposition temperature and later is brought into the zone of decomposition where vapors are separated from the unvaporized residue and the vapors are exposed to fractional condensation for the purpose of obtaining a light product of distillation. The method is characterized by the mixture being exposed to heating by means of indirect exchange of heat in a heating zone or by means of a direct addition of a hot heat-conducting medium, or by means of both the mentioned indirect exchange of heat and direct heat under such conditions that the unvaporized residue obtained from the thus-heated mixture in the decomposition zone is transformed to solid coke in this zone by being heated to coking temperature in a comparatively thin layer on the surface of the decomposition zone that has been heated to a high temperature.

Effects of deposition conditions on the properties of pyrolytic carbon deposited in a fluidized bed

International Nuclear Information System (INIS)

Lowden, Richard Andrew; Hunn, John D.; Nunn, Stephen D.; Kercher, Andrew K.; Price, Jeffery R.; Jellison, Gerald Earle Jr.

2005-01-01

The high-density, isotropic pyrolytic carbon layer beneath the silicon carbide (IPyC) plays a key role in the irradiation performance of coated particle fuel. The IPyC layer protects the kernel from reactions with chlorine during deposition of the SiC layer, provides structural support for the SiC layer, and protects the SiC from fission products and carbon monoxide. The process conditions used by the Germans to deposit the IPyC coating produced a highly isotropic, but somewhat permeable IPyC coating. The permeability of the IPyC coating was acceptable for use with the dense German UO 2 kernels, but may not be suitable when coating UCO kernels. The UCO kernels are typically more porous and thus have a larger surface area than UO 2 kernels. The lower density and the higher surface area of UCO kernels could make them more susceptible to attack by HCl gas during the silicon carbide (SiC) coating process, which could result in heavy metal dispersion into the buffer and IPyC coatings and a higher level of as-manufactured SiC defects. The relationship between IPyC deposition conditions, permeability, and anisotropy must be understood and the appropriate combination of anisotropy and permeability for particle fuel containing UCO kernels selected. A reference set of processing conditions have been determined from review of historical information and results of earlier coating experiments employing 350 and 500 (micro)m UO 2 kernels. It was decided that a limited study would be conducted, in which only coating gas fraction (CGF) and temperature would be varied. Coatings would be deposited at different rates and with a range of microstructures. Thickness, density, porosity and anisotropy would be measured and permeability evaluated using a chlorine leach test. The results would be used to select the best IPyC coating conditions for use with the available natural enrichment uranium carbide/uranium oxide (NUCO) kernels. The response plots from the investigation of the

Mechanical Properties and Structures of Pyrolytic Carbon Coating Layer in HTR Coated Particle Fuel

International Nuclear Information System (INIS)

Lee, Young Woo; Kim, Young Min; Kim, Woong Ki; Cho, Moon Sung

2009-01-01

The TRISO(tri-isotropic)-coated fuel particle for a HTR(High Temperature gas-cooled Reactor) has a diameter of about 1 mm, composed of a nuclear fuel kernel and four different outer coating layers, consisting of a buffer PyC (pyrolytic carbon) layer, inner PyC layer, SiC layer, and outer PyC layer with different coating thicknesses following a specific fuel design. While the fuel kernel is a source for a heat generation by a nuclear fission of fissile uranium, each of the four coating layers acts as a different role in view of retaining the generated fission products and the other interactions during an in-reactor service. Among these coating layers, PyC properties are scarcely in agreement among various investigators and the dependency of their changes upon the deposition condition is comparatively large due to their additional anisotropic properties. Although a recent review work has contributed to an establishment of relationship between the material properties and QC measurements, the data on the mechanical properties and structural parameters of PyC coating layers remain still unclearly evaluated. A review work on dimensional changes of PyC by neutron irradiation was one of re-evaluative works recently attempted by the authors. In this work, an attempt was made to analyze and re-evaluate the existing data of the experimental results of the mechanical properties, i.e., Young's modulus and fracture stress, in relation with the coating conditions, density and the BAF (Bacon Anisotropy Factor), an important structural parameter, of PyC coating layers obtained from various experiments performed in the early periods of the HTR coated particle development

Structures and electrochemical properties of pyrolytic carbon films infiltrated from gas phase into electro-conductive substrates derived from wood

International Nuclear Information System (INIS)

Ohzawa, Yoshimi; Mitani, Masami; Li, Jianling; Nakajima, Tsuyoshi

2004-01-01

Using the pressure-pulsed chemical vapor infiltration technique, pyrolytic carbon (pyrocarbon) films were deposited into two sorts of conductive porous substrates, that is, the carbonized wood (A) and the TiN-coated wood (B). Structures and electrochemical properties were investigated as the negative electrodes of lithium-ion secondary battery. The electrodes had the three-dimensionally continuous current paths in the pyrocarbon-based anodes without the organic binders and the additional conductive fillers. The pyrocarbon films adhered tightly to the carbonized wood or TiN as current collector. These macro-structures of electrodes were effective in improving the high rate property. The sort of substrates affected the nano-structure of pyrocarbon. The pyrocarbon in sample (A) had the relatively high crystallinity, whereas the pyrocarbon in sample (B) was disordered. The capacity of pyrocarbon in sample (B) was higher than that of sample (A), reflecting the disordered microstructure of pyrocarbon film (B). However, sample (A) showed higher Coulombic efficiency at first cycle (i.e. 87%) than that of sample (B), which would result from the high crystallinity, laminar microstructure and low surface area of pyrocarbon in sample (A)

Binary Hierarchical Porous Graphene/Pyrolytic Carbon Nanocomposite Matrix Loaded with Sulfur as a High-Performance Li-S Battery Cathode.

Science.gov (United States)

Zhang, Hang; Gao, Qiuming; Qian, Weiwei; Xiao, Hong; Li, Zeyu; Ma, Li; Tian, Xuehui

2018-06-06

A N,O-codoped hierarchical porous nanocomposite consisting of binary reduced graphene oxide and pyrolytic carbon (rGO/PC) from chitosan is fabricated. The optimized rGO/PC possesses micropores with size distribution concentrated around 1.1 nm and plenty of meso/macropores. The Brunauer-Emmett-Teller specific surface area is 480.8 m 2 g -1 , and it possesses impressively large pore volume of 2.14 cm 3 g -1 . On the basis of the synergistic effects of the following main factors: (i) the confined space effect in the hierarchical porous binary carbonaceous matrix; (ii) the anchor effects by strong chemical bonds with codoped N and O atoms; and (iii) the good flexibility and conductivity of rGO, the rGO/PC/S holding 75 wt % S exhibits high performance as Li-S battery cathode. Specific capacity of 1625 mA h g -1 can be delivered at 0.1 C (1 C = 1675 mA g -1 ), whereas 848 mA h g -1 can be maintained after 300 cycles at 1 C. Even at high rate of 5 C, 412 mA h g -1 can be restrained after 1000 cycles.

The master degree: A critical transition in STEM doctoral education

Science.gov (United States)

Lange, Sheila Edwards

The need to broaden participation in the nation's science, technology, engineering, and mathematics (STEM) undergraduate and graduate programs is currently a matter of national urgency. The small number of women and underrepresented minorities (URM) earning doctoral degrees in STEM is particularly troubling given significant increases in the number of students earning master's degrees since 1990. In the decade between 1990 and 2000, the total number of master's recipients increased by 42%. During this same time period, the number of women earning master's degrees increased by 56%, African Americans increased by 132%, American Indians by 101%, Hispanics by 146%, and Asian Americans by 117% (Syverson, 2003). Growth in underrepresented group education at the master's level raises questions about the relationship between master's and doctoral education. Secondary data analysis of the Survey of Earned Doctorates (SED) was used to examine institutional pathways to the doctorate in STEM disciplines and transitions from master's to doctoral programs by race and gender. While the study revealed no significant gender differences in pathways, compared to White and Asian American students, URM students take significantly different pathways to the doctorate. URM students are significantly more likely to earn the bachelor's, master's, and doctoral degrees at three different institutions. Their path is significantly more likely to include earning a master's degree en route to the doctorate. Further, URM students are more likely to experience transition between the master's and doctoral degrees, and the transitions are not limited to those who earn master's degrees at master's-only institutions. These findings suggest that earning a master's degree is more often a stepping stone to the doctorate for URM students. Master's degree programs, therefore, have the potential to be a valuable resource for policymakers and graduate programs seeking to increase the diversity of URM students

Magnetic field control of 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign domain wall resistance

Energy Technology Data Exchange (ETDEWEB)

Majidi, Roya, E-mail: royamajidi@gmail.com [Department of Physics, Shahid Rajaee Teacher Training University, Lavizan, 16788-15811 Tehran (Iran, Islamic Republic of)

2012-10-01

In the present work, we have compared the resistance of the 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign domain walls in the presence of external magnetic field. The calculations are based on the Boltzmann transport equation within the relaxation time approximation. One-dimensional Neel-type domain walls between two domains whose magnetization differs by angle of 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign are considered. The results indicate that the resistance of the 360 Degree-Sign DW is more considerable than that of the 90 Degree-Sign and 180 Degree-Sign DWs. It is also found that the domain wall resistance can be controlled by applying transverse magnetic field. Increasing the strength of the external magnetic field enhances the domain wall resistance. In providing spintronic devices based on magnetic nanomaterials, considering and controlling the effect of domain wall on resistivity are essential.

STM observation of a box-shaped graphene nanostructure appeared after mechanical cleavage of pyrolytic graphite

Energy Technology Data Exchange (ETDEWEB)

Lapshin, Rostislav V., E-mail: rlapshin@gmail.com [Solid Nanotechnology Laboratory, Institute of Physical Problems, Zelenograd, Moscow 124460 (Russian Federation); Department of Photosensitive Nano and Microsystems, Moscow Institute of Electronic Technology, Zelenograd, Moscow 124498 (Russian Federation)

2016-01-01

Graphical abstract: - Highlights: • A previously unknown 3D box-shaped graphene (BSG) nanostructure has been detected. • The nanostructure is a multilayer system of parallel nanochannels having quadrangular cross-section. • Typical width of a nanochannel facet makes 25 nm, typical wall/facet thickness is 1 nm. • A mechanism qualitatively explaining the nanostructure formation has been proposed. • Possible applications of the BSG nanostructure are briefly discussed. - Abstract: A description is given of a three-dimensional box-shaped graphene (BSG) nanostructure formed/uncovered by mechanical cleavage of highly oriented pyrolytic graphite (HOPG). The discovered nanostructure is a multilayer system of parallel hollow channels located along the surface and having quadrangular cross-section. The thickness of the channel walls/facets is approximately equal to 1 nm. The typical width of channel facets makes about 25 nm, the channel length is 390 nm and more. The investigation of the found nanostructure by means of a scanning tunneling microscope (STM) allows us to draw a conclusion that it is possible to make spatial constructions of graphene similar to the discovered one by mechanical compression, bending, splitting, and shifting graphite surface layers. The distinctive features of such constructions are the following: simplicity of the preparation method, small contact area between graphene planes and a substrate, large surface area, nanometer cross-sectional sizes of the channels, large aspect ratio. Potential fields of application include: ultra-sensitive detectors, high-performance catalytic cells, nanochannels for DNA manipulation, nanomechanical resonators, electron multiplication channels, high-capacity sorbents for hydrogen storage.

Combined 30-degree bevel up and down technique against 0-degree phaco tip for phacoemulsification surgery of hard cataracts

Directory of Open Access Journals (Sweden)

Joshi RS

2017-06-01

Full Text Available Rajesh Subhash Joshi, Sonal Jayant Muley Department of Ophthalmology, Vasantrao Naik Government Medical College, Yavatmal, Maharashtra, India Purpose: To evaluate the effective phaco time (EPT, cumulative dissipated energy (CDE and nucleus emulsification time (NET as phaco parameters with 0- and 30-degree phaco tip. Patients and methods: This prospective, interventional and observational case series included 294 patients scheduled for cataract removal by phacoemulsification technique. Patients with nuclear cataracts of grade 4 and 5 nuclear opalescence of Lens Opacities Classification System III were included in the study. Patients were consecutively allocated to phaco chop technique with 0-degree (0-degree group, n=147 and combined bevel up and down position using 30-degree phaco tip (combined bevel up/down group, n=147. The 0-degree group had phacoemulsification with 0-degree phaco tip, while the 30-degree group had chopping of the nucleus with bevel down phaco tip and emulsification of nuclear fragments was accomplished with bevel up tip. EPT, CDE, NET and intraoperative complications were noted and compared between the groups using analysis of variance. Results: Average EPT, CDE and NET were lower in the 30-degree group than in the 0-degree group. However, no statistically significant difference was found in EPT (P=0.0733, CDE (P=0.0663 and NET (P=0.0633 between the two groups. No serious intraoperative complications were noted. The anterior chamber was maintained throughout the procedure in both groups. No patients had wound burn and miosis during the procedure. None of the patients developed bullous keratopathy, uveitis and cystoid macular edema during the follow-up period. Conclusion: Combined bevel up and down 30-degree tip can yield effective hard nucleus phacoemulsification. Bevel down tip of 30-degree helps in effective chopping and bevel up tip assists in emulsification of the nuclear fragments. Although combined bevel up and down 30

Experimental study of pyrolytic boron nitride at high temperature with and without proton and VUV irradiations

International Nuclear Information System (INIS)

Balat-Pichelin, M.; Eck, J.; Heurtault, S.; Glénat, H.

2014-01-01

Highlights: • New results for the high temperature study of pBN in high vacuum for the heat shield of solar probes. • Physico-chemical behavior of pBN studied up to 1700 K with proton and VUV irradiations. • Rather low effect of synergistic aggressions on the microstructure of pBN material. • The α/ε ratio of pBN coating on C/C measured up to 2200 K is 20% lower than for the C/C itself. - Abstract: In the frame of future exploration missions such as Solar Probe Plus (NASA) and PHOIBOS (ESA), research was carried out to study pyrolytic BN material envisaged as coating for their heat shields. The physico-chemical behavior of CVD pBN at very high temperature with or without hydrogen ions and VUV (Vacuum Ultra-Violet) irradiations was studied in high vacuum together with the in situ measurement of the thermal radiative properties conditioning the thermal equilibrium of the heat shield. Experimental results obtained on massive pBN samples are presented through in situ mass spectrometry and mass loss rate, and post-test microstructural characterization by XRD, SEM, AFM and nano-indentation techniques, some of them leading to mechanical properties. It could be concluded that synergistic effect of high temperature, protons and VUV radiation has an impact on the emission of gaseous species, the mass loss rate and the mechanical properties of the material

Outcomes of torsional microcoaxial phacoemulsification performed by 12-degree and 22-degree bent tips.

Science.gov (United States)

Helvacioglu, Firat; Yeter, Celal; Tunc, Zeki; Sencan, Sadik

2013-08-01

To compare the safety and efficacy of Ozil Intelligent Phaco torsional microcoaxial phacoemulsification surgeries performed with 12-degree and 22-degree bent tips using the Infiniti Vision System. Maltepe University School of Medicine Department of Ophthalmology, Istanbul, Turkey. Comparative case series. Eyes were assigned to 2.2 mm microcoaxial phacoemulsification using the torsional mode with a 22-degree bent tip (Group 1) or a 12-degree bent tip (Group 2). The primary outcome measures were ultrasound time (UST), cumulative dissipated energy (CDE), longitudinal and torsional ultrasound (US) amplitudes, mean surgical time, mean volume of balanced salt solution used, and surgical complications. Both groups included 45 eyes. The mean UST, CDE, longitudinal US amplitude, and torsional US amplitude were 65 seconds ± 27.23 (SD), 11.53 ± 6.99, 0.22 ± 0.26, and 42.86 ± 15.64, respectively, in Group 1 and 84 ± 45.04 seconds, 16.68 ± 10.66, 0.48 ± 0.68, and 46.27 ± 14.74, respectively, in Group 2. The mean UST, CDE, and longitudinal amplitudes were significantly lower in Group 1 (P=.003, P=.008, and P=.022, respectively). The mean volume of balanced salt solution was 73.33 ± 28.58 cc in Group 1 and 82.08 ± 26.21 cc in Group 2 (P=.134). Torsional phacoemulsification performed with 22-degree bent tips provided more effective lens removal than 12-degree bent tips, with a lower UST and CDE. Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

The system Cu-Rh-S at 900 degrees, 700 degrees, 540 degrees and 500 degrees C

DEFF Research Database (Denmark)

Karup-Møller, Sven; Makovicky, E.

2007-01-01

Phase relations in the dry condensed system Cu-Rh-S were determined at 900, 700, 540 and 500 degrees C. At 900 degrees C, the system contains digenite, four rhodium sulfides (Rh17S15, Rh3S4, Rh2S3 and RhS similar to 3), three ternary sulfides (CuRh2S4, CuxRhS3+x and a fibrous sulfide in the range...

The Striking Progress of African Americans in Degree Attainments.

Science.gov (United States)

Journal of Blacks in Higher Education, 2002

2002-01-01

While the number of blacks earning bachelor's and master's degrees has risen significantly since 1985, and the number of black doctoral degrees rose 110 percent, the percentage of all degrees awarded to blacks at all levels is far lower than the black percentage of the U.S. population. Black women earn 65.7 percent of all doctorates awarded to…

Evaluation of Melanogenesis in A-375 Cells in the Presence of DMSO and Analysis of Pyrolytic Profile of Isolated Melanin

Science.gov (United States)

Chodurek, Ewa; Orchel, Arkadiusz; Orchel, Joanna; Kurkiewicz, Sławomir; Gawlik, Natalia; Dzierżewicz, Zofia; Stępień, Krystyna

2012-01-01

The increase of a skin malignant melanoma (melanoma malignum) incidence in the world has been observed in recent years. The tumour, especially in advanced stadium with metastases, is highly resistant to conventional treatment. One of the strategies is to modulate melanogenesis using chemical compounds. In this study, the processes of differentiation and melanogenesis induced by dimethylsulfoxide (DMSO) in human melanoma cells (A-375) were investigated. Natural melanin isolated from A-375 melanoma cell line treated with 0.3% DMSO was analyzed by pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) method. The products derived from pheomelanin have not been stated in the pyrolytic profile of analyzed melanin. Within all products derived from eumelanins, 1,2-benzenediol has been predominated. It has been shown that in the melanoma cells stimulated with 0.3% and 1% DMSO, the increase of transcriptional activity of the tyrosinase gene took place. It was accompanied by the rise of tyrosinase activity and an accumulation of melanin in the cells. The better knowledge about the structure of melanins can contribute to establish the uniform criteria of malignant melanoma morbidity risk. PMID:22654640

When Graduate Degrees Prostitute the Educational Process: Degrees Gone Wild

Science.gov (United States)

Lumadue, Richard T.

2006-01-01

Graduate degrees prostitute the educational process when they are sold to consumers by unaccredited degree/diploma mills as being equivalent to legitimate, bona-fide degrees awarded by accredited graduate schools. This article carefully analyzes the serious problems of bogus degrees and their association with the religious higher education…

Growth and characterization of stoichiometric BCN films on highly oriented pyrolytic graphite by radiofrequency plasma enhanced chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Mannan, Md. Abdul, E-mail: amannan75@yahoo.co [Department of Chemistry and Applied Chemistry, Faculty of Science and Engineering, Saga University, 1 Honjo, Saga 840-8502 (Japan); Synchrotron Radiation Research Unit, Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); Noguchi, Hideyuki; Kida, Tetsuya; Nagano, Masamitsu [Department of Chemistry and Applied Chemistry, Faculty of Science and Engineering, Saga University, 1 Honjo, Saga 840-8502 (Japan); Hirao, Norie; Baba, Yuji [Synchrotron Radiation Research Unit, Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan)

2010-05-31

Hexagonal boron carbonitride (h-BCN) hybrid films have been synthesized on highly oriented pyrolytic graphite by radiofrequency plasma enhanced chemical vapor deposition using tris-(dimethylamino)borane as a single-source molecular precursor. The films were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) and Raman spectroscopic measurements. XPS measurement showed that the B atoms were bonded to C and N atoms to form the sp{sup 2}-B-C-N atomic hybrid chemical environment. The atomic composition estimated from the XPS of the typical sample was found to be almost B{sub 1}C{sub 1}N{sub 1}. NEXAFS spectra of the B K-edge and the N K-edge had the peaks due to the {pi}* and {sigma}* resonances of sp{sup 2} hybrid orbitals implying the existence of the sp{sup 2} hybrid configurations of h-BCN around the B atoms. The G band at 1592 and D band at 1352 cm{sup -1} in the Raman spectra also suggested the presence of the graphite-like sp{sup 2}-B-C-N atomic hybrid bonds. The films consisted of micrometer scale crystalline structure of around 10 {mu}m thick has been confirmed by the field emission scanning electron microscopy.

Measurement of the oxidation of spent fuel between 140/degree/ and 225/degree/C by thermogravimetric analysis

International Nuclear Information System (INIS)

Woodley, R.E.; Einziger, R.E.; Buchanan, H.C.

1988-09-01

A series of PWR spent fuel samples from Turkey Point Unit 3 have been oxidized at temperatures between 140/degree/ and 225/degree/C in air atmospheres with dew points between 14.5/degree/ and /minus/70/degree/C, using a thermogravimetric analysis system (TGA). Tests lasted between 400 and 2100 hours. At the conclusion of a test, the atmosphere was sampled to determine the release of fission gas during testing, and the fuel samples were analyzed for microstructural changes. It appears that the mechanism for oxidation of spent fuel to U/sub 3/O/sub 7/ takes place in two steps that occur somewhat simultaneously. Oxygen migrates along the grain boundaries, which are oxidized and enlarged. The grains oxidize by the inward progression of a layer of U/sub 4/O/sub 9/ saturated with oxygen. A simplified model of the mechanism, which considers oxygen diffusion through the product layer as the rate-controlling step, yields an activation energy of 27 /plus minus/ 4 kcal/mol. Moisture, between dew points of /minus/70/degree/ to +14.5/degree/C, i.e., water vapor partial pressures varying over four orders of magnitude, had no significant effect on the oxidation rate. 34 refs., 12 figs., 6 tabs

Cooling hyperthermic firefighters by immersing forearms and hands in 10 degrees C and 20 degrees C water.

Science.gov (United States)

Giesbrecht, Gordon G; Jamieson, Christopher; Cahill, Farrell

2007-06-01

Firefighters experience significant heat stress while working with heavy gear in a hot, humid environment. This study compared the cooling effectiveness of immersing the forearms and hands in 10 and 20 degrees C water. Six men (33 +/- 10 yr; 180 +/- 4 cm; 78 +/- 9 kg; 19 +/- 5% body fat) wore firefighter 'turn-out gear' (heavy clothing and breathing apparatus weighing 27 kg) in a protocol including three 20-min exercise bouts (step test, 78 W, 40 degrees C air, 40% RH) each followed by a 20-min rest/cooling (21 degrees C air); i.e., 60 min of exercise, 60 min of cooling. Turn-out gear was removed during rest/cooling periods and subjects either rested (Control), immersed their hands in 10 or 20 degrees C water (H-10, H-20), or immersed their hands and forearms in 10 or 20 degrees C water (HF-10, HF-20). In 20 degrees C water, hand immersion did not reduce core temperature compared with Control; however, including forearm immersion decreased core temperature below Control values after both the second and final exercise periods (p hand immersion produced a lower core temperature (0.8 degrees C above baseline) than all other conditions (1.1 to 1.4 degrees C above baseline) after the final exercise period (p Hand and forearm immersion in cool water is simple, reduces heat strain, and may increase work performance in a hot, humid environment. With 20 degrees C water, forearms should be immersed with the hands to be effective. At lower water temperatures, forearm and/or hand immersion will be effective, although forearm immersion will decrease core temperature further.

Second-degree discrete Painleve equations conceal first-degree ones

International Nuclear Information System (INIS)

Ramani, A; Grammaticos, B; Joshi, N

2010-01-01

We examine various second-degree difference equations which have been proposed over the years and according to their authors' claims should be integrable. This study is motivated by the fact that we consider that second-degree discrete systems cannot be integrable due to the proliferation of the images (and pre-images) of the initial point. We show that in the present cases no contradiction exists. In all cases examined, we show that there exists an underlying integrable first-degree mapping which allows us to obtain an appropriate solution of the second-degree one.

Reflux and Belching After 270 Degree Versus 360 Degree Laparoscopic Posterior Fundoplication

NARCIS (Netherlands)

Broeders, Joris A.; Bredenoord, Albert J.; Hazebroek, Eric J.; Broeders, Ivo A.; Gooszen, Hein G.; Smout, André J.

2012-01-01

Objective: To investigate differences in effects of 270 degrees (270 degrees LPF) and 360 degrees laparoscopic posterior fundoplication (360 degrees LPF) on reflux characteristics and belching. Background: Three hundred sixty degrees LPF greatly reduces the ability of the stomach to vent ingested

Mathematical modeling of the fermentation of acid-hydrolyzed pyrolytic sugars to ethanol by the engineered strain Escherichia coli ACCC 11177.

Science.gov (United States)

Chang, Dongdong; Yu, Zhisheng; Islam, Zia Ul; Zhang, Hongxun

2015-05-01

Pyrolysate from waste cotton was acid hydrolyzed and detoxified to yield pyrolytic sugars, which were fermented to ethanol by the strain Escherichia coli ACCC 11177. Mathematical models based on the fermentation data were also constructed. Pyrolysate containing an initial levoglucosan concentration of 146.34 g/L gave a glucose yield of 150 % after hydrolysis, suggesting that other compounds were hydrolyzed to glucose as well. Ethyl acetate-based extraction of bacterial growth inhibitors with an ethyl acetate/hydrolysate ratio of 1:0.5 enabled hydrolysate fermentation by E. coli ACCC 11177, without a standard absorption treatment. Batch processing in a fermenter exhibited a maximum ethanol yield and productivity of 0.41 g/g and 0.93 g/L·h(-1), respectively. The cell growth rate (r x ) was consistent with a logistic equation [Formula: see text], which was determined as a function of cell growth (X). Glucose consumption rate (r s ) and ethanol formation rate (r p ) were accurately validated by the equations [Formula: see text] and [Formula: see text], respectively. Together, our results suggest that combining mathematical models with fermenter fermentation processes can enable optimized ethanol production from cellulosic pyrolysate with E. coli. Similar approaches may facilitate the production of other commercially important organic substances.

New pyrolytic and spectroscopic data on Orgueil and Murchison insoluble organic matter: A different origin than soluble?

Science.gov (United States)

Remusat, Laurent; Derenne, Sylvie; Robert, François; Knicker, Heike

2005-08-01

Pyrolysis with and without tetramethylammonium hydroxide (TMAH), vacuum pyrolysis, and solid state 15N nuclear magnetic resonance (NMR) were used to examine the macromolecular insoluble organic matter (IOM) from the Orgueil and Murchison meteorites. Conventional pyrolysis reveals a set of poorly functionalized aromatic compounds, ranging from one to four rings and with random methyl substitutions. These compounds are in agreement with spectroscopic and pyrolytic results previously reported. For the first time, TMAH thermochemolysis was used to study extraterrestrial material. The detection of aromatics bearing methyl esters and methoxy groups reveals the occurrence of ester and ether bridges between aromatic units in the macromolecular network. No nitrogen-containing compounds were detected with TMAH thermochemolysis, although they are a common feature in terrestrial samples. Along with vacuum pyrolysis results, thermochemolysis shows that nitrogen is probably sequestered in condensed structures like heterocyclic aromatic rings, unlike oxygen, which is mainly located within linkages between aromatic units. This is confirmed by solid state 15N NMR performed on IOM from Orgueil, showing that nitrogen is present in pyrrole, indole, and carbazole moieties. These data show that amino acids are neither derived from the hydrolysis of IOM nor from a common precursor. In order to reconcile the literature isotopic data and the present molecular results, it is proposed that aldehydes and ketones (1) originated during irradiation of ice in space and (2) were then mobilized during the planetesimal hydrothermalism, yielding the formation of amino acids. If correct, prebiotic molecules are the products of the subsurface chemistry of planetesimals and are thus undetectable through astronomical probes.

The Degree Cycle

DEFF Research Database (Denmark)

Wood, Johanna

2016-01-01

, empirical data relevant to the development of the degree adverb function is presented and possible relevant constructions identified. It is argued that the degree adverb function of that possibly occurs later than the historical dictionaries indicate. The degree adverb function of this is challenging...

Catalytic effect of KF-846 on the reforming of the primary intermediates from the co-pyrolysis of pubescens and LDPE

International Nuclear Information System (INIS)

Liu, Wen-wu; Hu, Chang-wei; Tong, Dong-mei; Yang, Yu; Li, Gui-ying; Zhu, Liang-fang; Tang, Jin-Qiang

2014-01-01

Highlights: • Reforming reactions were inhibited by H 2 , decrease of acidity and low temperature. • There was a synergistic effect on producing hydrogen between Ni and Mo. • The lattice oxygen over catalyst employed might transfer into the intermediates. • Co-pyrolysis, low temperature and N 2 could restrain oxygen transfer to some extent. - Abstract: Co-pyrolysis is regarded as an effective approach to upgrade the quality of pyrolysis products. In this work the activity of KF-846 was evaluated by co-pyrolysis of pubescens and low density polyethylene under different experimental conditions including catalytic mode, pyrolytic atmosphere and temperature, etc. The results showed that the fresh KF-846 exerted strong effects of cyclization, aromatization, hydrogen transfer and vapor-catalytic reforming reactions on the primary intermediates from the co-pyrolysis. The hydrogen-rich gases indicated a synergistic effect between Ni and Mo over KF-846 on producing hydrogen. More importantly, the reforming reactions might be inhibited to some extent by H 2 atmosphere, the low temperature and the decrease of acidity over catalyst. Furthermore, it was deduced that the oxygen over the lattice of catalyst or some intermediates might transfer into other intermediates, possibly resulting in more products with high oxygen content, but it was presumed that the low temperature, co-pyrolysis process and N 2 atmosphere could repress the trend to a certain degree. The mass and energy balance of co-pyrolysis were analyzed, and the main reaction pathways were also proposed. The interference in pyrolysis by regulating the catalytic mode, pyrolytic atmosphere and temperature, acidity over catalyst might posses a certain guiding significance for the pyrolytic technology and the design/selection of catalysts employed

Where are the black-hole entropy degrees of freedom?

International Nuclear Information System (INIS)

Das, Saurya; Shankaranarayanan, S

2007-01-01

Understanding the area proportionality of black-hole entropy (the 'area law') from an underlying fundamental theory has been one of the goals of all models of quantum gravity. A key question that one asks is: where are the degrees of freedom giving rise to black-hole entropy located? Taking the point of view that entanglement between field degrees of freedom inside and outside the horizon can be a source of this entropy, we show that when the field is in its ground state, the degrees of freedom near the horizon contribute most to the entropy, and the area law is obeyed. However, when it is in an excited state, degrees of freedom far from the horizon contribute more significantly, and deviations from the area law are observed. In other words, we demonstrate that horizon degrees of freedom are responsible for the area law

Effect of substrate temperature on the properties of pyrolytically deposited nitrogen-doped zinc oxide thin films

International Nuclear Information System (INIS)

Golshahi, S.; Rozati, S.M.; Botelho do Rego, A.M.; Wang, J.; Elangovan, E.; Martins, R.; Fortunato, E.

2013-01-01

Highlights: ► Hall-effect measurement introduces the optimum temperature of 450 °C for fabricating p-type high quality ZnO films. ► X-ray photoelectron spectroscopy (XPS) proved the nitrogen presence at the surface of doped ZnO thin films at all substrate temperatures. ► Films prepared at lower substrate temperature (300 °C and 350 °C) own wider band gaps. ► Surface roughness strongly is affected by substrate temperature variations. - Abstract: The effect of substrate temperature (T s ) on the properties of pyrolytically deposited nitrogen (N) doped zinc oxide (ZnO) thin films was investigated. The T s was varied from 300 °C to 500 °C, with a step of 50 °C. The positive sign of Hall coefficient confirmed the p-type conductivity in the films deposited at 450 °C and 500 °C. X-ray diffraction studies confirmed the ZnO structure with a dominant peak from (1 0 0) crystal plane, irrespective of the variation in T s . The presence of N in the ZnO structure was evidenced through X-ray photoelectron spectroscopy (XPS) analysis. The obtained high N concentration reveals that the 450 °C is the optimal T s . Atomic force microscope (AFM) analysis showed that the surface roughness was increased with the increasing T s until 400 °C but then decreased. It is found that the transmittance of the deposited films is increased with the increasing T s . The optical band gap calculated from the absorption edge showed that the films deposited with T s of 300 °C and 350 °C possess higher values than those deposited at higher T s .

Degree distribution in discrete case

International Nuclear Information System (INIS)

Wang, Li-Na; Chen, Bin; Yan, Zai-Zai

2011-01-01

Vertex degree of many network models and real-life networks is limited to non-negative integer. By means of measure and integral, the relation of the degree distribution and the cumulative degree distribution in discrete case is analyzed. The degree distribution, obtained by the differential of its cumulative, is only suitable for continuous case or discrete case with constant degree change. When degree change is not a constant but proportional to degree itself, power-law degree distribution and its cumulative have the same exponent and the mean value is finite for power-law exponent greater than 1. -- Highlights: → Degree change is the crux for using the cumulative degree distribution method. → It suits for discrete case with constant degree change. → If degree change is proportional to degree, power-law degree distribution and its cumulative have the same exponent. → In addition, the mean value is finite for power-law exponent greater than 1.

Contribution to the study of hard, low-density pyrolytic carbons; Contribution a l'etude des carbones pyrolytiques de variete dure et de faible densite

Energy Technology Data Exchange (ETDEWEB)

Boutin, F R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

Apparent contradictions in the properties of pyrolytic carbons obtained at 1600 deg C (hardness and graphitization) are studied. It is shown that structure of the deposit is turbostratic with high internal stresses ({delta}{sup -2}), and it graphitizes (by thermal treatment over 2000 deg C) in a similar manner to graphitisable carbon. Because the deposit forms lamellar compounds, it is presumed that the structure is similar to that of graphitisable carbon. Since it is not structure dependant, the hardness originates from the 'growth texture' and is not comparable with the hardness of a non-graphitisable carbon. The pyrolytic carbon studied is composed of regions, on the overage a few microns across, formed by the stacking of small carbon platelets, interlocked and showing a preferred orientation. The mis-orientation of the various regions produces general disorientation. We estimate that the introduction of the particles of some material such as thermal black which are observed in the electron microscope are responsible for the mis-orientation. The density and hardness of the deposit are a result of the interlocking of platelets, which creates a closed porosity and prevents any sliding of the atomic planes. (author) [French] On etudie les proprietes apparemment contradictoires du pyrocarbone 1600 deg C, durete et graphitabilite. On montre que le pyrocarbone possede la structure d'un carbone turbostratique a fort taux de distorsion et qu'il subit, par traitement a des temperatures superieures a 2000 deg C, une transformation de graphitation comparable a celle que l'on observe sur les cokes graphitables. Comme le pyrocarbone forme de plus des composes d'insertion, sa structure est comparable a celle d'un carbone graphitable. La durete, qui n'a pas d'origine structurale, est donc liee a la 'texture de croissance' du depot et ne peut etre comparee a celle d'un coke dur et non graphitable. Le pyrocarbone etudie est constitue de domaines, dont les dimensions sont de l

Choroidal thickness in eyes with different degrees of myopia

Directory of Open Access Journals (Sweden)

Yuriy Sergeyevich Astakhov

2013-12-01

Full Text Available 66 healthy people (124 eyes with different degrees of myopia and emmetropia were examined using enhanced depth imaging optical coherence tomography (EDI-OCT using the “Spectralis OCT”. It was found that the choroid in subjects with medium and high degrees of myopia was significantly thinner than that in the control group. In the study, a negative correlation was found between the subfoveal choroidal thickness and the degree of myopia (r = -0.75, p < 0.0001. It was also found that the subfoveal choroidal thickness decreased for each diopter of myopia by approximately 18.03 μm.

Establishing a master's degree programme in bioinformatics: challenges and opportunities.

Science.gov (United States)

Sahinidis, N V; Harandi, M T; Heath, M T; Murphy, L; Snir, M; Wheeler, R P; Zukoski, C F

2005-12-01

The development of the Bioinformatics MS degree program at the University of Illinois, the challenges and opportunities associated with such a process, and the current structure of the program is described. This program has departed from earlier University practice in significant ways. Despite the existence of several interdisciplinary programs at the University, a few of which grant degrees, this is the first interdisciplinary program that grants degrees and formally recognises departmental specialisation areas. The program, which is not owned by any particular department but by the Graduate College itself, is operated in a franchise-like fashion via several departmental concentrations. With four different colleges and many more departments involved in establishing and operating the program, the logistics of the operation are of considerable complexity but result in significant interactions across the entire campus.

Impact of degree program satisfaction on the persistence of college students

NARCIS (Netherlands)

Suhre, Cor J. M.; Jansen, Ellen P. W. A.; Harskamp, Evert

Many theories on college retention recognize the significance of student satisfaction as a positive factor in students' persistence. Yet, there are few theories that address the relationship of degree program satisfaction to study behaviour and dropout. This paper explores the impact of degree

High degree gravitational sensitivity from Mars orbiters for the GMM-1 gravity model

Science.gov (United States)

Lerch, F. J.; Smith, D. E.; Chan, J. C.; Patel, G. B.; Chinn, D. S.

1994-01-01

Orbital sensitivity of the gravity field for high degree terms (greater than 30) is analyzed on satellites employed in a Goddard Mars Model GMM-1, complete in spherical harmonics through degree and order 50. The model is obtained from S-band Doppler data on Mariner 9 (M9), Viking Orbiter 1 (VO1), and Viking Orbiter 2 (VO2) spacecraft, which were tracked by the NASA Deep Space Network on seven different highly eccentric orbits. The main sensitivity of the high degree terms is obtained from the VO1 and VO2 low orbits (300 km periapsis altitude), where significant spectral sensitivity is seen for all degrees out through degree 50. The velocity perturbations show a dominant effect at periapsis and significant effects out beyond the semi-latus rectum covering over 180 degrees of the orbital groundtrack for the low altitude orbits. Because of the wideband of periapsis motion covering nearly 180 degrees in w and +39 degrees in latitude coverage, the VO1 300 km periapsis altitude orbit with inclination of 39 degrees gave the dominant sensitivity in the GMM-1 solution for the high degree terms. Although the VO2 low periapsis orbit has a smaller band of periapsis mapping coverage, it strongly complements the VO1 orbit sensitivity for the GMM-1 solution with Doppler tracking coverage over a different inclination of 80 degrees.

Investigating MBA Degrees Earned by Women: A Decade of Change

Science.gov (United States)

McConnell, Cheryl; Rush, Douglas; Gartland, Myles

2016-01-01

The authors examined master of business administration (MBA) degrees earned by women at U.S. higher education institutions at three specific years spanning a decade: 2003, 2008, and 2013 to determine whether there was a significant difference in the percentage of MBA degrees earned by women based on the independent variables of institutional type,…

Does degree of baldness influence vitamin D status?

Science.gov (United States)

Bolland, Mark J; Ames, Ruth W; Grey, Andrew B; Horne, Anne M; Mason, Barbara H; Gamble, Greg D; Reid, Ian R

To determine the association, if any, between male-pattern hair loss (baldness) and serum 25-hydroxyvitamin D (25-OHD) levels. A cross-sectional study of 296 healthy middle-aged and older men. Degree of baldness was independently assessed by two researchers using the Hamilton-Norwood scale and serum 25-OHD was measured in all men. Classification of the degree of baldness by the two researchers showed a high level of agreement (kappa = 0.93). Forty-eight per cent of men had no hair loss or mild frontotemporal recession, 15% had predominant vertex loss, and 37% had significant scalp and vertex loss. After data were adjusted for potential confounding factors - including age, month of 25-OHD measurement, exercise levels, use of sunscreen, skin type and frequency of outdoor hat wearing - no significant differences in 25-OHD levels between these groups was detected (P = 0.60). The degree of baldness does not appear to influence serum 25-OHD levels. The high prevalence of baldness in older men does not explain sex differences in 25-OHD levels. Other novel hypotheses are required to help determine whether baldness serves any physiological purpose.

Prognostic significance of Gleason score 7 (3+4 and Gleason score 7 (4+3 in prostatic adenocarcinoma in relation to clinical stage, androgen tissue status and degree of neuroendocrine differentiation

Directory of Open Access Journals (Sweden)

Mijović M.

2014-01-01

Full Text Available Prognosis and choice of treatment of adenocarcinoma of the prostate (ADCP directly depend on the numerous of predictive factors, among which the most important are summary histological tumor grade (Gleason score, which is the sum of the first and second dominant histological grade and clinical stage. According to recent research these factors include androgen tissue status and degree of neuroendocrine differentiation. The importance of the first and second dominant histological grade becomes particularly important in ADCP Gleason score 7. Tumors with worse prognosis considered to be ADCP of higher Gleason score, the advanced clinical stage, androgen independent tumors and tumors that show a higher degree of neuroendocrine differentiation. The aim of the study was to determine the predictive significance of ADCP Gleason score 7 (3+4 and ADCP Gleason score 7 (4+3 in relation to clinical stage, androgen tissue status and degree of focal neuroendocrine differentiation. The study included 33 ADCP of Gleason score 7,26 (78.79% ADCP 7 (3+4 and 7 (21.21% ADCP 7 (4+3. All tumors are most often diagnosed with stage D2, when there are already distant metastases. ADCP of Gleason score 7 (4+3 were diagnosed more often at this stage, among them there are more androgen independent tumors and they show a greater degree of focal neuroendocrine differentiation. All the results are in accordance with data from the literature suggesting that ADCP of Gleason score 7 (4+3 have a worse prognosis than ADCP of Gleason score 7 (3 +4.

Why do different people choose different university degrees? Motivation and the choice of degree

Directory of Open Access Journals (Sweden)

Anya eSkatova

2014-11-01

Full Text Available Different people choose which undergraduate degree to study at the university for different reasons. To date, there have been limited attempts to identify individual differences in motivation that drive the undergraduate degree choice. We identified that people choose university degrees for four reasons: career concerns (Career, intrinsic interest (Interest in the subject, an opportunity to help others (Helping and because they are looking for an easy option into higher education (Loafing. We investigated whether these motivation apply to the choice of undergraduate degree in two samples: (1 undergraduate (N = 989 and (2 prospective (N = 896 students. We developed the Motivations Influencing Course Choice (MICC questionnaire to measure these motivations. Scales of Helping, Career, Loafing and Interest showed good psychometric properties, showed validity with respect to general life goals and personality traits, and predicted actual and prospective degree choices. We demonstrated that medical degrees were chosen due to a mixture of Helping and Career, while engineering degrees were associated with Career and low interest in the degree. The choice of art and humanities degrees was driven by Interest and low concern about future career, accompanied with high Loafing. We also demonstrated gender differences: females were high in Helping (both samples and Interest (only in undergraduate sample motivation, while males scored higher in Career (only in undergraduate sample and Loafing (both samples. The findings can feed into both theoretical accounts of proximal motivation as well as help to improve degree programmes at universities and provide better career advice.

Why do different people choose different university degrees? Motivation and the choice of degree.

Science.gov (United States)

Skatova, Anya; Ferguson, Eamonn

2014-01-01

Different people choose undergraduate degrees to study at university for different reasons. To date, there have been limited attempts to identify individual differences in motivation that drive undergraduate degree choice. We identified that people choose university degrees for four reasons: career concerns (Career), intrinsic interest in the subject (Interest), an opportunity to help others (Helping) and because they are looking for an easy option to get into higher education (Loafing). We investigated whether these motivations apply to the choice of undergraduate degree in two samples: (1) undergraduate (N = 989) and (2) prospective (N = 896) students. We developed the Motivations Influencing Course Choice (MICC) questionnaire to measure these motivations. Scales of Helping, Career, Loafing, and Interest showed good psychometric properties, showed validity with respect to general life goals and personality traits, and predicted actual and prospective degree choices. We demonstrated that medical degrees were chosen due to a mixture of Helping and Career, while engineering degrees were associated with Career and low Interest in the degree. The choice of arts and humanities degrees was driven by Interest and low concern about future career, accompanied with high Loafing. We also demonstrated gender differences: females were high in Helping (both samples) and Interest (only in the undergraduate sample) motivation, while males scored higher in Career (only in the undergraduate sample) and Loafing (both samples). The findings can feed into both theoretical accounts of proximal motivation as well as provide help to improve degree programmes at universities and support better career advice.

X-ray photoelectron spectroscopic and morphologic studies of Ru nanoparticles deposited onto highly oriented pyrolytic graphite

Science.gov (United States)

Bavand, R.; Yelon, A.; Sacher, E.

2015-11-01

Ruthenium nanoparticles (Ru NPs) function as effective catalysts in specific reactions, such as methanation and Fischer-Tropsch syntheses. It is our purpose to physicochemically characterize their surfaces, at which catalysis occurs, by surface-sensitive X-ray photoelectron spectroscopy (XPS), using the symmetric peak component anaylsis technique developed in our laboratory to reveal previously hidden components. Ru NPs were deposited by evaporation (0.25-1.5 nm nominal deposition range) onto highly oriented pyrolytic graphite (HOPG). In addition to their surfaces being characterized by XPS, an indication of morphology was obtained from transmission electron microscopy (TEM). Our use of symmetric peak component XPS analysis has revealed detailed information on a previously unidentified surface oxide initially formed, as well as on the valence electronic structure and its variation with NP size, information that is of potential importance in the use of these NPs in catalysis. Each of the several Ru core XPS spectra characterized (3d, 3p and 3s) was found to be composed of three symmetric components. Together with two metal oxide O1s components, these give evidence of a rather complex, previously unidentified oxide that is initially formed. The Ru valence band (4d and 5s) spectra clearly demonstrate a loss of metallicity, a simultaneous increase of the Kubo gap, and an abrupt transfer in valence electron density from the 4d to the 5s orbitals (known as electron spill-over), as the NP size decreases below 0.5 nm. TEM photomicrographs, as a function of deposition rate, show that, at a rate that gives insufficient time for the NP condensation energy to dissipate, the initially well-separated NPs are capable of diffusing laterally and aggregating. This indicates weak NP bonding to the HOPG substrate. Carbide is formed, at both high and low deposition rates, at Ru deposition thicknesses greater than 0.25 nm, its formation explained by Ru NPs reacting with residual

Low cell pH depresses peak power in rat skeletal muscle fibres at both 30 degrees C and 15 degrees C: implications for muscle fatigue.

Science.gov (United States)

Knuth, S T; Dave, H; Peters, J R; Fitts, R H

2006-09-15

Historically, an increase in intracellular H(+) (decrease in cell pH) was thought to contribute to muscle fatigue by direct inhibition of the cross-bridge leading to a reduction in velocity and force. More recently, due to the observation that the effects were less at temperatures closer to those observed in vivo, the importance of H(+) as a fatigue agent has been questioned. The purpose of this work was to re-evaluate the role of H(+) in muscle fatigue by studying the effect of low pH (6.2) on force, velocity and peak power in rat fast- and slow-twitch muscle fibres at 15 degrees C and 30 degrees C. Skinned fast type IIa and slow type I fibres were prepared from the gastrocnemius and soleus, respectively, mounted between a force transducer and position motor, and studied at 15 degrees C and 30 degrees C and pH 7.0 and 6.2, and fibre force (P(0)), unloaded shortening velocity (V(0)), force-velocity, and force-power relationships determined. Consistent with previous observations, low pH depressed the P(0) of both fast and slow fibres, less at 30 degrees C (4-12%) than at 15 degrees C (30%). However, the low pH-induced depressions in slow type I fibre V(0) and peak power were both significantly greater at 30 degrees C (25% versus 9% for V(0) and 34% versus 17% for peak power). For the fast type IIa fibre type, the inhibitory effect of low pH on V(0) was unaltered by temperature, while for peak power the inhibition was reduced at 30 degrees C (37% versus 18%). The curvature of the force-velocity relationship was temperature sensitive, and showed a higher a/P(0) ratio (less curvature) at 30 degrees C. Importantly, at 30 degrees C low pH significantly depressed the ratio of the slow type I fibre, leading to less force and velocity at peak power. These data demonstrate that the direct effect of low pH on peak power in both slow- and fast-twitch fibres at near-in vivo temperatures (30 degrees C) is greater than would be predicted based on changes in P(0), and that the

Humanities Degrees on the Rise. Data Points: Volume 5, Issue 20

Science.gov (United States)

American Association of Community Colleges, 2017

2017-01-01

In fall 2015, U.S community colleges enrolled about 7.2 million for-credit students. During the same year, community colleges awarded 806,766 associate degrees and 516,820 certificates. The new Humanities Indicators report from the American Academy of Arts and Sciences shows a significant increase in associate degrees awarded in the humanities,…

A scanning tunneling microscope study on an ordered mixed monolayer of bis(4,5-dihydronaphtho[1,2-d])-tetrathiafulvalene and n-tetradecane on highly oriented pyrolytic graphite.

Science.gov (United States)

Zhao, Miao; Jiang, Peng; Deng, Ke; Jiang, Chao

2010-11-01

Tetrathiafulvalene (TTF) and its derivatives (TTFs) have been successfully used as building blocks to form charge transfer salts and organic semiconductors because of their special structures and rich electron nature. We report the formation of ordered mixed binary-component monolayer consisting of Bis(4,5-dihydronaphtho[1,2-d])tetrathiafulvalene (DH-TTF) and n-tetradecane (n-C14H30) molecules on highly oriented pyrolytic graphite (HOPG) surface. Scanning tunneling microscope (STM) imaging reveals that the two different kinds of molecules can spontaneously form ordered periodic phase separation structures on the substrate, in which ordered DH-TTF double- (or single-) lamella structures are periodically tuned by ordered n-C14H30 double- (or single-) lamella structures. Furthermore, scanning tunneling spectrum (STS) measurements by addressing the individual DH-TTF and n-C14H30 molecules in the ordered monolayer show that the two different kinds of molecules exhibit completely different I(V) characters on the HOPG substrate. The modulated arrangement of the TTF derivative by insulating molecules opens a possible route to construct organic conducting molecule ribbons for potential application in nanodevices.

Tensile properties of vanadium alloys irradiated at <430{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Chung, H.M.; Smith, D.L. [Argonne National Lab., IL (United States)

1997-08-01

Recent attention to vanadium alloys has focused on significant susceptibility to loss of work-hardening capability in irradiation experiments at <430{degrees}C. An evaluation of this phenomenon was conducted on V-Ti, V-Cr-Ti, and V-Ti-Si alloys irradiated in several conventional and helium-charging irradiation experiments in the FFTF-MOTA, HFIR, and EBR-II. Work hardening capability and uniform tensile elongation appear to vary strongly from alloy and heat to heat. A strong heat-to-heat variation has been observed in V-4Cr-4Ti alloys tested, i.e., a 500-kg heat (No. 832665), a 100-kg heat (VX-8), and a 30-kg heat (BL-47). The significant differences in susceptibility to loss of work-hardening capability from one heat to another are estimated to correspond to a difference of {approx}100{degrees}C or more in minimum allowable operating temperature (e.g., 450 versus 350{degrees}C).

Association between different degrees of hypothyroidism and serum ...

African Journals Online (AJOL)

The association between overt hypothyroidism (OH) and altered lipid profile is well known, however the significance of dyslipidemia in subclinical hypothyroidism (SCH) remain controversial. Therefore, this study was conducted to determine any association between lipid profile and different degrees of thyroid dysfunction.

Antioxidant Activity of the Lignins Derived from Fluidized-Bed Fast Pyrolysis

Directory of Open Access Journals (Sweden)

Sohail S. Qazi

2017-03-01

Full Text Available A challenge in recent years has been the rational use of forest and agriculture residues for the production of bio-fuel, biochemical, and other bioproducts. In this study, potentially useful compounds from pyrolytic lignins were identified by HPLC-MS/MS and untargeted metabolomics. The metabolites identified were 2-(4-allyl-2-methoxyphenoxy-1-(4-hydroxy-3-methoxyphenyl-1-propanol, benzyl benzoate, fisetinidol, phenyllactic acid, 2-phenylpropionic acid, 6,3′-dimethoxyflavone, and vanillin. The 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (DPPH, trolox equivalent antioxidant capacity (TEAC, and total phenolics content (TPC per gram of pyrolytic lignin ranged from 14 to 503 mg ascorbic acid equivalents, 35 to 277 mg trolox equivalents, and 0.42 to 50 mg gallic acid equivalents, respectively. A very significant correlation was observed between the DPPH and TPC (r = 0.8663, p ≤ 0.0001, TEAC and TPC (r = 0.8044, p ≤ 0.0001, and DPPH and TEAC (r = 0.8851, p ≤ 0.0001. The polyphenolic compounds in the pyrolytic lignins which are responsible for radical scavenging activity and antioxidant properties can be readily profiled with HPLC-MS/MS combined with untargeted metabolomics. The results also suggest that DPPH, TEAC, and TPC assays are suitable methods for the measurement of antioxidant activity in a variety of pyrolytic lignins. These data show that the pyrolytic lignins can be considered as promising sources of natural antioxidants and value-added chemicals.

Degree-strength correlation reveals anomalous trading behavior.

Science.gov (United States)

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Wang, Zhao-Yang

2012-01-01

Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock markets. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying the anomalous traders using the transaction data of eight manipulated stocks and forty-four non-manipulated stocks during a one-year period. By analyzing the trading networks of stocks, we find that the trading networks of manipulated stocks exhibit significantly higher degree-strength correlation than the trading networks of non-manipulated stocks and the randomized trading networks. We further propose a method to detect anomalous traders of manipulated stocks based on statistical significance analysis of degree-strength correlation. Experimental results demonstrate that our method is effective at distinguishing the manipulated stocks from non-manipulated ones. Our method outperforms the traditional weight-threshold method at identifying the anomalous traders in manipulated stocks. More importantly, our method is difficult to be fooled by colluded traders.

Degree-strength correlation reveals anomalous trading behavior.

Directory of Open Access Journals (Sweden)

Xiao-Qian Sun

Full Text Available Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock markets. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying the anomalous traders using the transaction data of eight manipulated stocks and forty-four non-manipulated stocks during a one-year period. By analyzing the trading networks of stocks, we find that the trading networks of manipulated stocks exhibit significantly higher degree-strength correlation than the trading networks of non-manipulated stocks and the randomized trading networks. We further propose a method to detect anomalous traders of manipulated stocks based on statistical significance analysis of degree-strength correlation. Experimental results demonstrate that our method is effective at distinguishing the manipulated stocks from non-manipulated ones. Our method outperforms the traditional weight-threshold method at identifying the anomalous traders in manipulated stocks. More importantly, our method is difficult to be fooled by colluded traders.

16 CFR 1061.8 - Information on the heightened degree of protection afforded.

Science.gov (United States)

2010-01-01

... protection afforded. 1061.8 Section 1061.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL APPLICATIONS FOR EXEMPTION FROM PREEMPTION § 1061.8 Information on the heightened degree of protection afforded... State or local requirement provides a significantly higher degree of protection from the risk of injury...

Beyond centrality-classifying topological significance using backup efficiency and alternative paths

International Nuclear Information System (INIS)

Shavitt, Yuval; Singer, Yaron

2007-01-01

In complex networks characterized by broad degree distribution, node significance is often associated with its degree or with centrality metrics which relate to its reachability and shortest paths passing through it. Such measures do not consider availability of efficient backup of the node and thus often fail to capture its contribution to the functionality and resilience of the network operation. In this paper, we suggest the quality of backup (QoB) and alternative path centrality (APC) measures as complementary methods which enable analysis of node significance in a manner which considers backup. We examine the theoretical significance of these measures and use them to classify nodes in social interaction networks and in the Internet AS (autonomous system) graph while applying the valley-free routing restrictions which reflect the economic relationships between the AS nodes in the Internet. We show that both node degree and node centrality are not necessarily evidence of its significance. In particular, we show that social structures do not necessarily depend on highly central nodes and that medium degree nodes with medium centrality measure prove to be crucial for efficient routing in the Internet AS graph

Chemical Changes In Shortfin Scad (Decapterus Macrosoma) at Chilled (4 degree Celcius) and Frozen (-18 degree Celcius) Storage

International Nuclear Information System (INIS)

Fazilah Fazilin Juhari; Norizzah Abd Rashid; Seng, C.C.; Anida Yusoff; Emilia Azrina Mohd Bakri

2016-01-01

The aim of this study was to determine the chemical changes in muscle tissue of shortfin scad during storage at chilled (4 degree Celcius) and frozen (-18 degree Celcius) conditions for 18 days. The chemical changes were monitored every three days for Thiobarbituric acid (TBA), Peroxide value (PV), Total Volatile Base Nitrogen (TVBN) and Trimethylamine (TMA) content. Results show that there was a significant difference (p<0.05) in peroxide and TBA values between chilled and frozen shortfin scad starting from day 3. The highest PV values occured in chilled and frozen shortfin scad at day 12 (1.57 mEq/ kg and 1.13 mEq/ kg, respectively), and then decreased due to decomposition of hydroperoxides to secondary products such as aldehydes, alcohols and ketones. In contrast, TBA reached the highest values at day 15 for both chilled and frozen shortfin scad. For TVBN content, only the chilled sample shows significant increased (p<0.05) with storage time. The TVBN values declined significantly (p<0.05) for frozen shortfin scad. The TMA values for both chilled and frozen shortfin scad increased during storage. However, the TMA values increased at a faster rate in chilled compared to frozen shortfin scad. Based on the PV, TBA, TVBN and TMA values, chilled shortfin scad undergoes spoilage at a faster rate compared to the frozen shortfin scad. (author)

Performance and microbial community composition dynamics of aerobic granular sludge from sequencing batch bubble column reactors operated at 20 degrees C, 30 degrees C, and 35 degrees C.

Science.gov (United States)

Ebrahimi, Sirous; Gabus, Sébastien; Rohrbach-Brandt, Emmanuelle; Hosseini, Maryam; Rossi, Pierre; Maillard, Julien; Holliger, Christof

2010-07-01

Two bubble column sequencing batch reactors fed with an artificial wastewater were operated at 20 degrees C, 30 degrees C, and 35 degrees C. In a first stage, stable granules were obtained at 20 degrees C, whereas fluffy structures were observed at 30 degrees C. Molecular analysis revealed high abundance of the operational taxonomic unit 208 (OTU 208) affiliating with filamentous bacteria Leptothrix spp. at 30 degrees C, an OTU much less abundant at 20 degrees C. The granular sludge obtained at 20 degrees C was used for the second stage during which one reactor was maintained at 20 degrees C and the second operated at 30 degrees C and 35 degrees C after prior gradual increase of temperature. Aerobic granular sludge with similar physical properties developed in both reactors but it had different nutrient elimination performances and microbial communities. At 20 degrees C, acetate was consumed during anaerobic feeding, and biological phosphorous removal was observed when Rhodocyclaceae-affiliating OTU 214 was present. At 30 degrees C and 35 degrees C, acetate was mainly consumed during aeration and phosphorous removal was insignificant. OTU 214 was almost absent but the Gammaproteobacteria-affiliating OTU 239 was more abundant than at 20 degrees C. Aerobic granular sludge at all temperatures contained abundantly the OTUs 224 and 289 affiliating with Sphingomonadaceae indicating that this bacterial family played an important role in maintaining stable granular structures.

Femtosecond laser ablation of highly oriented pyrolytic graphite: a green route for large-scale production of porous graphene and graphene quantum dots

Science.gov (United States)

Russo, Paola; Hu, Anming; Compagnini, Giuseppe; Duley, Walter W.; Zhou, Norman Y.

2014-01-01

Porous graphene (PG) and graphene quantum dots (GQDs) are attracting attention due to their potential applications in photovoltaics, catalysis, and bio-related fields. We present a novel way for mass production of these promising materials. The femtosecond laser ablation of highly oriented pyrolytic graphite (HOPG) is employed for their synthesis. Porous graphene (PG) layers were found to float at the water-air interface, while graphene quantum dots (GQDs) were dispersed in the solution. The sheets consist of one to six stacked layers of spongy graphene, which form an irregular 3D porous structure that displays pores with an average size of 15-20 nm. Several characterization techniques have confirmed the porous nature of the collected layers. The analyses of the aqueous solution confirmed the presence of GQDs with dimensions of about 2-5 nm. It is found that the formation of both PG and GQDs depends on the fs-laser ablation energy. At laser fluences less than 12 J cm-2, no evidence of either PG or GQDs is detected. However, polyynes with six and eight carbon atoms per chain are found in the solution. For laser energies in the 20-30 J cm-2 range, these polyynes disappeared, while PG and GQDs were found at the water-air interface and in the solution, respectively. The origin of these materials can be explained based on the mechanisms for water breakdown and coal gasification. The absence of PG and GQDs, after the laser ablation of HOPG in liquid nitrogen, confirms the proposed mechanisms.Porous graphene (PG) and graphene quantum dots (GQDs) are attracting attention due to their potential applications in photovoltaics, catalysis, and bio-related fields. We present a novel way for mass production of these promising materials. The femtosecond laser ablation of highly oriented pyrolytic graphite (HOPG) is employed for their synthesis. Porous graphene (PG) layers were found to float at the water-air interface, while graphene quantum dots (GQDs) were dispersed in the

Evaluation of a method for the determination of chromium in urine by atomic absorption spectrometry

International Nuclear Information System (INIS)

Garcia, M.; Sardinas, O.; Castaneda, I.; Sanchez, R.

1990-01-01

A method for the determination of chromium in urine by atomic absorption spectrometry, using electrothermic atomization with pyrolytic graphite tubes, is proposed. The determinations are performed by standard addition. The method is applicable to biologic monitoring of populations with different degrees of exposition. It is also used in the analysis of chromium in sediments. Results of chromium in urine of a population group non-exposed to the metal are presented. 11 refs

Introducing Modified Degree 4 Chordal Rings with Two Chord Lengths

DEFF Research Database (Denmark)

Pedersen, Jens Myrup

2007-01-01

In this paper an analysis of modified degree 4 Chordal Rings with two chord lengths named CHRm is presented and compared to similar topologies: Chordal Rings, N2R and modified N2R. Formulas for approximating diameters and average path lengths are provided and verified, and it is shown...... that the distances in CHRm are significantly smaller than in traditional Chordal Rings and N2R, and also smaller than modified N2R for topologies with up to 1500 nodes. Despite the proposed CHRm being of degree 4, and the modified N2R of degree 3, CHRm may be better suited for the optical level of fiber rings, due...

[The importance of master's degree and doctorate degree in general surgery].

Science.gov (United States)

Montalvo-Javé, Eduardo Esteban; Mendoza-Barrera, Germán Eduardo; Valderrama-Treviño, Alan Isaac; Alcántara-Medina, Stefany; Macías-Huerta, Nain Abraham; Tapia-Jurado, Jesús

2016-01-01

The Doctor of Philosophy is the highest academic degree that can be obtained in universities. Graduate Education Program in Medicine in Mexico is divided into 2 major categories: Medical Specialty and Master studies/Doctor of Philosophy. The objective of this study was to demonstrate the importance of master's degrees and Doctor of Philosophy in general surgery. A literature search in PubMed and Medline among others, from 1970 to 2015 with subsequent analysis of the literature reviews found. The physicians who conducted doctoral studies stand out as leaders in research, teaching and academic activities. Dual training with a doctorate medical specialty is a significant predictor for active participation in research projects within the best educational institutions. It is important to study a PhD in the education of doctors specialising in surgery, who show more training in teaching, research and development of academic activities. Currently, although there is a little proportion of students who do not finish the doctoral program, the ones who do are expected to play an important role in the future of medical scientific staff. It has been shown that most doctors with Doctor of Philosophy have wide range of career options. The importance of doctoral studies in the formation of general surgery is due to various reasons; the main one being comprehensively training physician scientists who can develop in clinical, teaching and research. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

HRD Degrees.

Science.gov (United States)

Geber, Beverly

1987-01-01

The author describes the growing movement toward accreditation for human resources development professionals. She covers the issue of diversity, undergraduate versus graduate degrees, and future trends. (CH)

Characteristics of Waste Plastics Pyrolytic Oil and Its Applications as Alternative Fuel on Four Cylinder Diesel Engines

Directory of Open Access Journals (Sweden)

Nosal Nugroho Pratama

2014-02-01

Full Text Available Waste plastics recycling using pyrolysis method is not only able to decrease a number of environment pollutant but also able to produce economical and high quality hydrocarbon products. Two experiments were conducted to completely study Waste Plastic Pyrolytic Oil (WPPO characteristics and its applications.  First experiment investigated oil characteristics derived from pyrolysis process in two stages batch reactors: pyrolysis and catalytic reforming reactor, at maximum temperature 500oC and 450oC respectively. Waste Polyethylene (PE, Polypropylene (PP, Polystyrene (PS, Polyethylene Terepthalate (PET and others were used as raw material. Nitrogen flow rate at 0.8 l/minutes was used to increase oil weight percentage. Indonesian natural zeolite was used as catalyst. Then, second experiment was carried out on Diesel Engine Test Bed (DETB used blending of WPPO and Biodiesel fuel with a volume ratio of 1:9. This experiment was specifically conducted to study how much potency of blending of WPPO and biodiesel in diesel engine. The result of first experiment showed that the highest weight percentage of WPPO derived from mixture of PE waste (50%wt, PP waste (40%wt and PS waste (10%wt is 45.13%wt. The more weight percentage of PE in feedstock effected on the less weight percentage of WPPO, the more percentage of C12-C20 content in WPPO and the higher calorific value of WPPO. Characteristics of WPPO such as, Specific Gravity, Flash point, Pour Point, Kinematic Viscosity, Calorific value and percentage of C12-C20 showed interesting result that WPPO could be developed as alternative fuel on diesel fuel blending due to the proximity of their characteristics. Performance of diesel engine using blending of WPPO and biodiesel on second experiment gave good result so the WPPO will have great potency to be valuable alternative liquid fuel in future, especially on stationary diesel engine and transportation engine application.

HadISST (1-degree)/HadISST (1-degree)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Monthly version of HadISST sea surface temperature component (1-degree). See Rayner, N. A., Parker, D. E., Horton, E. B., Folland, C. K., Alexander, L. V., Rowell,...

Set our Master's degrees free

Science.gov (United States)

Padman, Rachael

2010-04-01

Making UK undergraduate physics degrees longer must have seemed like a good idea at the time. Back in the early 1990s the standard three-year Bachelor's physics degree (four years in Scotland) was under pressure at both ends. The A-level curriculum - one of the requirements for entry onto a degree course - was being increasingly modularized, and dumbed down. Physics students were arriving at university less well prepared than in the past and there was an increasing awareness that graduates of five-year continental degree courses were better equipped for a professional scientific career than those in the UK. At the same time, local education authorities in the UK were required to provide full funding for a first degree, whether for three or four years.

Clinical significance of late high-degree atrioventricular block in patients with left ventricular dysfunction after an acute myocardial infarction--a Cardiac Arrhythmias and Risk Stratification After Acute Myocardial Infarction (CARISMA) substudy

DEFF Research Database (Denmark)

Gang, Uffe Jakob Ortved; Jøns, Christian; Jørgensen, Rikke Mørch

2011-01-01

High-degree atrioventricular block (HAVB) is a frequent complication in the acute stages of a myocardial infarction associated with an increased rate of mortality. However, the incidence and clinical significance of HAVB in late convalescent phases of an AMI is largely unknown. The aim of this st...... of this study was to assess the incidence and prognostic value of late HAVB documented by continuous electrocardiogram (ECG) monitoring in post-AMI patients with reduced left ventricular function....

A critical reflection on subjectivity in examination of higher degrees

Directory of Open Access Journals (Sweden)

Collins C Ngwakwe

2015-11-01

Full Text Available This paper is a critical reflection on seemingly embedded subjectivity in external examination of higher degrees. The paper is significant given that education is a vital pillar of sustainable development; hence, identification of obscure obstacles to this goal is imperative for an equitable and sustainable education that is devoid of class, race and gender. Adopting a critical review approach, the paper rummaged some related researches that bemoan apparent subjectivity amongst some examiners of higher degrees. Findings show a regrettable and seemingly obscured subjectivity and/or misjudgement that constitute an impediment in higher degrees examination process. Thus the paper highlights that whilst it is understandable that misjudgement or error is innate in every human endeavour including higher degree examination, however an error caused by examiner’s partisanship and/or maladroitness in the research focus may be avoidable. In conclusion, the paper stresses that prejudice or ineptitude in higher degree examination should be bridled by inter alia implementing the policy of alternative assessor; checking the pedigree of examiner’s assessment experience and an opportunity for the supervisor/s to present a rebuttal in circumstances where one examiner’s opinion is fraught with apparent subjectivity.

Opposite Degree Algorithm and Its Applications

Directory of Open Access Journals (Sweden)

Xiao-Guang Yue

2015-12-01

Full Text Available The opposite (Opposite Degree, referred to as OD algorithm is an intelligent algorithm proposed by Yue Xiaoguang et al. Opposite degree algorithm is mainly based on the concept of opposite degree, combined with the idea of design of neural network and genetic algorithm and clustering analysis algorithm. The OD algorithm is divided into two sub algorithms, namely: opposite degree - numerical computation (OD-NC algorithm and opposite degree - Classification computation (OD-CC algorithm.

On the relationship between degree of hand-preference and degree of language lateralization

NARCIS (Netherlands)

Somers, Metten; Ophoff, Roel A; Boks, Marco P; Fleer, Willemien; de Visser, Kees C L; Kahn, René S; Sommer, Iris E; Aukes, M.F.

2015-01-01

Language lateralization and hand-preference show inter-individual variation in the degree of lateralization to the left- or right, but their relation is not fully understood. Disentangling this relation could aid elucidating the mechanisms underlying these traits. The relation between degree of

The use of comet assay to assess DNA integrity of boar spermatozoa following liquid preservation at 5 degrees C and 16 degrees C.

Directory of Open Access Journals (Sweden)

J Strzezek

2004-03-01

Full Text Available The comet assay, under neutral conditions, allows the assessment of DNA integrity influenced by sperm ageing, which is manifested in DNA double-strand breaks. Here, we attempted to use a modified neutral comet assay test (single-cell gel electrophoresis, to our knowledge for the first time, to assess DNA integrity of boar spermatozoa during liquid storage for 96 h at 5 degrees C and 16 degrees C. In this comet assay protocol we used 2% beta-mercaptoethanol prior to the lysis procedure, to aid in removing nuclear proteins. Ejaculates from 3 boars (designated A, C and G were diluted with a standard semen extender, Kortowo-3 (K-3, which was supplemented with lipoprotein fractions extracted from hen egg yolk (LPFh or ostrich egg yolk (LPFo. Irrespective of the extender type, the percentage of comet-detected spermatozoa with damaged DNA increased gradually during prolonged storage at 5 degrees C and 16 degrees C. Spermatozoa stored in K-3 extender exhibited elevated levels of DNA damage at both storage temperatures. Significant differences in DNA damage among the boars were more pronounced during storage in LPF-based extenders at 5 degrees C: spermatozoa of boars A and G were less susceptible to DNA damage. The percent of tail DNA in comets was lower in LPF-based extenders, and there were individual variations among the boars. We observed that changes in DNA integrity were dependent on the extender type and storage temperature. A higher level of DNA instability was observed in K-3 extended semen compared with K-3/LPFh or K-3/LPFo extended semen during storage at 5 degrees C. No significant difference in the level of DNA damage between K-3/LPFh and K-3/LPFo was observed. It seems that a long-term storage can affect genomic integrity of boar spermatozoa. The modified neutral comet assay can be used to detect low levels of DNA damage in boar spermatozoa during liquid preservation. Therefore, screening for sperm DNA damage may be used as an additional

The use of comet assay to assess DNA integrity of boar spermatozoa following liquid preservation at 5 degrees C and 16 degrees C.

Science.gov (United States)

Fraser, L; Strzezek, J

2004-01-01

The comet assay, under neutral conditions, allows the assessment of DNA integrity influenced by sperm ageing, which is manifested in DNA double-strand breaks. Here, we attempted to use a modified neutral comet assay test (single-cell gel electrophoresis), to our knowledge for the first time, to assess DNA integrity of boar spermatozoa during liquid storage for 96 h at 5 degrees C and 16 degrees C. In this comet assay protocol we used 2% beta-mercaptoethanol prior to the lysis procedure, to aid in removing nuclear proteins. Ejaculates from 3 boars (designated A, C and G) were diluted with a standard semen extender, Kortowo-3 (K-3), which was supplemented with lipoprotein fractions extracted from hen egg yolk (LPFh) or ostrich egg yolk (LPFo). Irrespective of the extender type, the percentage of comet-detected spermatozoa with damaged DNA increased gradually during prolonged storage at 5 degrees C and 16 degrees C. Spermatozoa stored in K-3 extender exhibited elevated levels of DNA damage at both storage temperatures. Significant differences in DNA damage among the boars were more pronounced during storage in LPF-based extenders at 5 degrees C: spermatozoa of boars A and G were less susceptible to DNA damage. The percent of tail DNA in comets was lower in LPF-based extenders, and there were individual variations among the boars. We observed that changes in DNA integrity were dependent on the extender type and storage temperature. A higher level of DNA instability was observed in K-3 extended semen compared with K-3/LPFh or K-3/LPFo extended semen during storage at 5 degrees C. No significant difference in the level of DNA damage between K-3/LPFh and K-3/LPFo was observed. It seems that a long-term storage can affect genomic integrity of boar spermatozoa. The modified neutral comet assay can be used to detect low levels of DNA damage in boar spermatozoa during liquid preservation. Therefore, screening for sperm DNA damage may be used as an additional test of sperm

Estudo voltamétrico do complexo de cobre(II com o ligante vermelho de alizarina S, adsorvido na superfície do eletrodo de grafite pirolítico Voltammetric study of complex of copper (II with alizarin red S ligand, absorbed on surface of pyrolytic graphite electrode

Directory of Open Access Journals (Sweden)

Victor E. Mouchrek Filho

1999-06-01

Full Text Available The alizarin red S (ARS has been used as a spectrophotometric reagent of several metals for a long time. Now this alizarin has been used as modifier agent of electrodes, for voltammetric analyses. In this work cyclic voltammetry experiments was accomplished on closed circuit, with the objective of studying the voltammetric behavior of alizarin red S adsorbed and of its copper complex, on the surface of the pyrolytic graphite electrode. These studies showed that ARS strongly adsorbs on the surface of this electrode. This adsorption was used to immobilize ions copper(II from the solution.

Diploma to degree 1976 to 1993

International Nuclear Information System (INIS)

Price, Richard

2009-01-01

The debate on degree education for radiographers began in earnest in the mid-1970s. Initially the debate hinged around whether a degree education was necessary for radiographers. One argument was that it was felt that a degree would separate academic and clinical training but eventually when degrees were introduced practical skills were assessed formally for the first time; something that had not been achieved with the Diploma of the College of Radiographers (DCR). The DCR itself became a barrier to degree education as the College of Radiographers (CoR) insisted that it was the only qualification recognised for state registration and as such would have to remain embedded as a distinct qualification within a degree. A major breakthrough came when the Council for National Academic Awards (CNAA) recognised the DCR at the same level as an ordinary degree. Around the same time the CoR published its Degree Rationale which announced a change in policy by not insisting that the DCR was sacrosanct. Developments followed rapidly and the first honours degree in radiography was validated in 1989 despite opposition from scientific officers at the Department of Health. Degrees were approved for state registration and radiography became a graduate profession by 1993 following years of debate and after overcoming opposition from both within and external to the profession.

Fracture toughness testing of V-4Cr-4Ti at 25{degrees}C and -196{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Li, H.X.; Kurtz, R.J. [Pacific Northwest National Lab., Richland, WA (United States)

1996-10-01

Measurements of the fracture toughness of the production-scale heat (832665) of V-4Cr-4Ti have been performed at 25{degrees}C and {minus}196{degrees}C using compact tension (CT) specimens. Test specimens were vacuum annealed at either 1000{degrees}C for 1 hour (HT1) or 1050{degrees}C for two hours (HT2). Specimens given the HT1 treatment were annealed after final machining, whereas the HT2 specimens received the 1050{degrees}C anneal at Teledyne Wah Chang prior to final machining. Following machining HT2 specimens were then vacuum annealed at 180{degrees}C for two hours to remove hydrogen. Specimens treated using HT1 had a partially recrystallized microstructure and those treated using HT2 had a fully recrystallized microstructure. The fracture toughness at 25{degrees}C was determined by J-integral tests and at {minus}196{degrees}C by ASTM E 399 type tests. Toughness values obtained at {minus}196{degrees}C were converted to J-integral values for comparison to the 25{degrees}C data. The 25{degrees}C fracture toughness was very high with none of the specimens giving valid results per ASTM criteria. Specimens fractured by microvoid coalescence. The fracture toughness at {minus}196{degrees}C was much lower than that at 25{degrees}C and the fracture surface showed predominantly cleavage features. The present results show a transition from ductile to brittle behavior with decreasing test temperature which is not observed from one-third scale Charpy impact tests. The fracture toughness at {minus}196{degrees}C was still quite high, however, at about 75 kJ/m{sup 2}. Delaminations in planes normal to the thickness direction were seen at both test temperatures. Fracture surfaces inside the delaminations exhibited nearly 100% cleavage facets. The cause of the brittle delaminations was not determined, but will be a subject for further investigation.

Comparison of two-stage thermophilic (68 degrees C/55 degrees C) anaerobic digestion with one-stage thermophilic (55 degrees C) digestion of cattle manure

DEFF Research Database (Denmark)

Nielsen, H.B.; Mladenovska, Zuzana; Westermann, Peter

2004-01-01

A two-stage 68degreesC/55degreesC anaerobic degradation process for treatment of cattle manure was studied. In batch experiments, an increase of the specific methane yield, ranging from 24% to 56%, was obtained when cattle manure and its fractions (fibers and liquid) were pretreated at 68degrees......, was compared with a conventional single-stage reactor running at 55degreesC with 15-days HRT. When an organic loading of 3 g volatile solids (VS) per liter per day was applied, the two-stage setup had a 6% to 8% higher specific methane yield and a 9% more effective VS-removal than the conventional single......-stage reactor. The 68degreesC reactor generated 7% to 9% of the total amount of methane of the two-stage system and maintained a volatile fatty acids (VFA) concentration of 4.0 to 4.4 g acetate per liter. Population size and activity of aceticlastic methanogens, syntrophic bacteria, and hydrolytic...

Fabrication of novel coated pyrolytic graphite electrodes for the selective nano-level monitoring of Cd²⁺ ions in biological and environmental samples using polymeric membrane of newly synthesized macrocycle.

Science.gov (United States)

Sahani, Manoj Kumar; Singh, A K; Jain, A K; Upadhyay, Anjali; Kumar, Amit; Singh, Udai P; Narang, Shikha

2015-02-20

Novel 5-amino-1,3,4-thiadiazole-2-thiol unit based macrocyclic ionophore 5,11,17-trithia-1,3,7,9,13,15,19,20,21-nonaazatetracyclo[14.2.1.1(4,7).1(10,13)]henicosa-4(20),10(21),16(19)-triene-6,12,18-trithione (M1), was synthesized and characterized. Preliminary studies on M1 have showed that it has more the affinity toward Cd(2+) ion. Thus, the macrocyclic ionophore (M1) was used as electroactive material in the fabrication of PVC-membrane electrodes such as polymeric membrane electrode (PME), coated graphite electrode (CGE) and coated pyrolytic graphite electrode (CPGE) were prepared and its performance characteristic were compared with. The electroanalytical studies performed on PME, CGE and CPGE revealed that CPGE having membrane composition M1:PVC:1-CN:NaTPB in the ratio of 7:37:54:2 exhibits the best potentiometric characteristics in terms of detection limit of 7.58×10(-9) mol L(-1), Nernstian slope of 29.6 mV decade(-1) of activity. The sensor was found to be independent of pH in the range 2.5-8.5. The sensor showed a fast response time of 10s and could be used over a period of 4 months without any significant divergence in its potentiometric characteristics. The sensor has been employed for monitoring of the Cd(2+) ion in real samples and also used as an indicator electrode in the potentiometric titration of Cd(2+) ion with EDTA. Copyright © 2014. Published by Elsevier B.V.

Perception of collaborative learning in associate degree students in Hong Kong.

Science.gov (United States)

Shek, Daniel T L; Shek, Moses M W

2013-01-01

Although collaborative learning has been widely researched in Western contexts, no study has been carried out to understand how associate degree students look at collaborative learning in Hong Kong. In this study, perceptions of and attitudes to collaborative learning among associate degree students were studied. A total of 44 associate degree students completed an online questionnaire including measures of perceived benefits and attitudes to collaborative learning, and social-emotional competence. Results showed that there were no significant differences between male and female students on perceived benefits of and attitudes towards collaborative learning. Social-emotional competence was related to perceived benefits of and attitudes to collaborative learning. Attitudes were also related to perceived benefits of collaborative learning. This paper is the first known study looking at the relationships among perceived benefits and attitudes to collaborative learning and social-emotional competence in Chinese associate degree students in different Chinese contexts.

The Kilo-Degree Survey

NARCIS (Netherlands)

de Jong, J. T. A.; Kuijken, K.; Applegate, D.; Begeman, K.; Belikov, A.; Blake, C.; Bout, J.; Boxhoorn, D.; Buddelmeijer, H.; Buddendiek, A.; Cacciato, M.; Capaccioli, M.; Choi, A.; Cordes, O.; Covone, G.; Dall'Ora, M.; Edge, A.; Erben, T.; Franse, J.; Getman, F.; Grado, A.; Harnois-Deraps, J.; Helmich, E.; Herbonnet, R.; Heymans, C.; Hildebrandt, H.; Hoekstra, H.; Huang, Z.; Irisarri, N.; Joachimi, B.; Köhlinger, F.; Kitching, T.; La Barbera, F.; Lacerda, P.; McFarland, J.; Miller, L.; Nakajima, R.; Napolitano, N. R.; Paolillo, M.; Peacock, J.; Pila-Diez, B.; Puddu, E.; Radovich, M.; Rifatto, A.; Schneider, P.; Schrabback, T.; Sifon, C.; Sikkema, G.; Simon, P.; Sutherland, W.; Tudorica, A.; Valentijn, E.; van der Burg, R.; van Uitert, E.; van Waerbeke, L.; Velander, M.; Kleijn, G. V.; Viola, M.; Vriend, W.-J.

2013-01-01

The Kilo-Degree Survey (KiDS), a 1500-square-degree optical imaging survey with the recently commissioned OmegaCAM wide-field imager on the VLT Survey Telescope (VST), is described. KiDS will image two fields in u-,g-,r- and i-bands and, together with the VIKING survey, produce nine-band (u- to

Student satisfaction and academic performance in a dual PharmD/MBA degree program.

Science.gov (United States)

Chumney, Elinor C G; Ragucci, Kelly R

2006-04-15

Evaluate the academic experience and satisfaction of students enrolled in the dual PharmD/MBA degree program between the South Carolina College of Pharmacy and The Citadel's School of Business Administration. Compare grade point averages of students enrolled in the dual degree program with those of traditional student colleagues. A standardized satisfaction survey instrument was administered to 32 students currently enrolled in the dual PharmD/MBA degree program. Grade point averages (GPAs) in both pharmacy and business coursework were also collected for analysis. There were slightly higher percentages of both female and minority students in the dual degree program compared to the pharmacy class as a whole. Eighteen (56%) of students completed the survey, and responses were generally positive. The mean GPA of students in the dual degree program was higher than that of both pharmacy (3.37 vs 3.08, p vs 3.64, not statistically significant) students not enrolled in the dual degree program. Students enrolled in the dual degree program did better academically than their counterparts and indicated an overall high level of satisfaction with the program.

Femtosecond laser ablation of highly oriented pyrolytic graphite: a green route for large-scale production of porous graphene and graphene quantum dots.

Science.gov (United States)

Russo, Paola; Hu, Anming; Compagnini, Giuseppe; Duley, Walter W; Zhou, Norman Y

2014-02-21

Porous graphene (PG) and graphene quantum dots (GQDs) are attracting attention due to their potential applications in photovoltaics, catalysis, and bio-related fields. We present a novel way for mass production of these promising materials. The femtosecond laser ablation of highly oriented pyrolytic graphite (HOPG) is employed for their synthesis. Porous graphene (PG) layers were found to float at the water-air interface, while graphene quantum dots (GQDs) were dispersed in the solution. The sheets consist of one to six stacked layers of spongy graphene, which form an irregular 3D porous structure that displays pores with an average size of 15-20 nm. Several characterization techniques have confirmed the porous nature of the collected layers. The analyses of the aqueous solution confirmed the presence of GQDs with dimensions of about 2-5 nm. It is found that the formation of both PG and GQDs depends on the fs-laser ablation energy. At laser fluences less than 12 J cm(-2), no evidence of either PG or GQDs is detected. However, polyynes with six and eight carbon atoms per chain are found in the solution. For laser energies in the 20-30 J cm(-2) range, these polyynes disappeared, while PG and GQDs were found at the water-air interface and in the solution, respectively. The origin of these materials can be explained based on the mechanisms for water breakdown and coal gasification. The absence of PG and GQDs, after the laser ablation of HOPG in liquid nitrogen, confirms the proposed mechanisms.

Correlation Between TNF- α and Degree of Gastritis

Directory of Open Access Journals (Sweden)

Ricky Rivalino

2018-04-01

Full Text Available Background: TNF- α is a cytokine that plays an active role in the pathogenesis of gastritis. The correlation of TNF-α levels in the gastric mucosa with the severity of gastritis has long been known. However, few studies have assessed TNF-α levels in serum of gastritis patients. This study aims to evaluate correlation between serum TNF-α level with the degree of gastritis based on histopathology. Method: A cross sectional study on eighty gastritis patients that fulfilled the inclusion criteria underwent serum TNF-α examination, endoscopy, and biopsy. Rapid urease test was used for diagnosis of H. pylori infection. The severity of gastritis based on lymphocyte infiltration, neutrophil infiltration, atrophy, and intestinal metaplasia according to Updated Sydney System. Univariate and bivariate analysis (Chi-square, fisher's exact, spearman correlation, and independent T-test were done using SPSS version 22. Results: There were 41.25% patients infected with Helicobacter pylori. Serum TNF-α levels in the infected group were significantly higher compared to negative H. pylori (p < 0.05. There was significant positive correlation between serum TNF-α levels and degree of gastritis based on lymphocyte infiltration (r = 0.333; p = 0.003. Conclusion: There was a significant positive correlation between serum TNF-α level with the severity of gastritis based on lymphocyte infiltration.

Using Different Chord Lengths in Degree Three Chordal Rings and N2R Topologies

DEFF Research Database (Denmark)

Pedersen, Jens Myrup; Madsen, Ole Brun; Patel, Ahmed

2007-01-01

Degree Three Chordal Rings and N2R Topologies are useful for physial and optical network topologies due to the combination of short distances, regularity and low degrees. In this paper we show how distances in terms of average distances and diameters can be significantly decreased by using chords...

Nitrogen-Rich Polyacrylonitrile-Based Graphitic Carbons for Hydrogen Peroxide Sensing

Directory of Open Access Journals (Sweden)

Brandon Pollack

2017-10-01

Full Text Available Catalytic substrate, which is devoid of expensive noble metals and enzymes for hydrogen peroxide (H2O2, reduction reactions can be obtained via nitrogen doping of graphite. Here, we report a facile fabrication method for obtaining such nitrogen doped graphitized carbon using polyacrylonitrile (PAN mats and its use in H2O2 sensing. A high degree of graphitization was obtained with a mechanical treatment of the PAN fibers embedded with carbon nanotubes (CNT prior to the pyrolysis step. The electrochemical testing showed a limit of detection (LOD 0.609 µM and sensitivity of 2.54 µA cm−2 mM−1. The promising sensing performance of the developed carbon electrodes can be attributed to the presence of high content of pyridinic and graphitic nitrogens in the pyrolytic carbons, as confirmed by X-ray photoelectron spectroscopy. The reported results suggest that, despite their simple fabrication, the hydrogen peroxide sensors developed from pyrolytic carbon nanofibers are comparable with their sophisticated nitrogen-doped graphene counterparts.

Families of Smooth Rational Curves of Small Degree on the Fano Variety of Degree 5 of Main Series

Directory of Open Access Journals (Sweden)

M. S. Omelkova

2013-01-01

Full Text Available In this paper we consider some families of smooth rational curves of degree 2, 3 and 4 on a smooth Fano threefold X which is a linear section of the Grassmanian G(1, 4 under the Pl¨ucker embedding. We prove that these families are irreducible. The proof of the irreducibility of the families of curves of degree d is based on the study of degeneration of a rational curve of degree d into a curve which decomposes into an irreducible rational curve of degree d−1 and a projective line intersecting transversally at a point. We prove that the Hilbert scheme of curves of degree d on X is smooth at the point corresponding to such a reducible curve. Then calculations in the framework of deformation theory show that such a curve varies into a smooth rational curve of degree d. Thus, the set of reducible curves of degree d of the above type lies in the closure of a unique component of the Hilbert scheme of smooth rational curves of degree d on X. From this fact and the irreducibility of the Hilbert scheme of smooth rational curves of degree d on the Grassmannian G(1, 4 one deduces the irreducibility of the Hilbert scheme of smooth rational curves of degree d on a general Fano threefold X.

45 CFR 2400.41 - Degree programs.

Science.gov (United States)

2010-10-01

... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related master's degree in education that permits a concentration in American history, American government, social studies...

Polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs) mitigation in the pyrolysis process of waste tires using CO₂ as a reaction medium.

Science.gov (United States)

Kwon, Eilhann E; Oh, Jeong-Ik; Kim, Ki-Hyun

2015-09-01

Our work reported the CO2-assisted mitigation of PAHs and VOCs in the thermo-chemical process (i.e., pyrolysis). To investigate the pyrolysis of used tires to recover energy and chemical products, the experiments were conducted using a laboratory-scale batch-type reactor. In particular, to examine the influence of the CO2 in pyrolysis of a tire, the pyrolytic products including C1-5-hydrocarbons (HCs), volatile organic carbons (VOCs), and polycyclic aromatic hydrocarbons (PAHs) were evaluated qualitatively by gas chromatography (GC) with mass spectroscopy (MS) as well as with a thermal conductivity detector (TCD). The mass balance of the pyrolytic products under various pyrolytic conditions was established on the basis of their weight fractions of the pyrolytic products. Our experimental work experimentally validated that the amount of gaseous pyrolytic products increased when using CO2 as a pyrolysis medium, while substantially altering the production of pyrolytic oil in absolute content (7.3-17.2%) and in relative composition (including PAHs and VOCs). Thus, the co-feeding of CO2 in the pyrolysis process can be considered an environmentally benign and energy efficient process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analysis of central corneal thickness in different degrees of diabetic retinopathy

Directory of Open Access Journals (Sweden)

Shan Hua

2014-06-01

Full Text Available AIM: To study central corneal thickness(CCTand correlation in different degrees of diabetic retinopathy(DR.METHODS: A total of 65 cases(130 eyeswith different degrees of DR and 35 normal cases(70 eyesas the age-and gender-matched control group were examined by corneal endothelial microscope, to measure CCT and statistics RESULTS: Compared to control group, there were no significant difference of CCT both mild and medium nonproliferative diabetic retinopathy(NPDRgroups(P>0.05. While the CCT of severe NPDR group and proliferative diabetic retinopathy(PDRgroup were thicker than control group, and the differences were statistically significant(PPPr=0.173, PCONCLUSION: The CCT increases with severity of DR. Taking care of protecting corneal endothelium is very important in the time of therapeutic measure, especially intraocular operation, to decrease complication.

Virtual displays for 360-degree video

Science.gov (United States)

Gilbert, Stephen; Boonsuk, Wutthigrai; Kelly, Jonathan W.

2012-03-01

In this paper we describe a novel approach for comparing users' spatial cognition when using different depictions of 360- degree video on a traditional 2D display. By using virtual cameras within a game engine and texture mapping of these camera feeds to an arbitrary shape, we were able to offer users a 360-degree interface composed of four 90-degree views, two 180-degree views, or one 360-degree view of the same interactive environment. An example experiment is described using these interfaces. This technique for creating alternative displays of wide-angle video facilitates the exploration of how compressed or fish-eye distortions affect spatial perception of the environment and can benefit the creation of interfaces for surveillance and remote system teleoperation.

Sequential application of NaHCO3, CaCl2 and Candida oleophila (isolate 13L) affects significantly Penicillum expansum growth and the infection degree in apples.

Science.gov (United States)

Molinu, M G; Pani, G; Venditti, T; Dore, A; Ladu, G; D'Hallewin, G

2011-01-01

The employment of biocontrol agents to restrain postharvest pathogens is an encouraging approach, although, efficacy and consistency are still below those of synthetic pesticides. Up to date, the 'integrated control strategy' seems to be the most promising way to overcome this gap. Here, we report the feasibility to control postharvest decay caused by Penicillium expansum in apples by a 2 min, single or sequential, immersion in water with an antagonistic yeast (Candida oleophila, isolate '13L'), 2% NaHCO3 (SBC) or 1% CaCl2. The treatments were carried out, on appels cv 'Miali' either un-wounded, wounded or wound-pathogen inoculated and then stored at 2 degrees C for 30 d followed by a 6 d simulated marketing period at 20 degrees C or alternatively stored only for 7 d at 20 degrees C. As a general role, the best results were attained when CaCl2 was applied with the yeast or when preceded by the SBC treatment. When the wounding and inoculation took place 24 h before the treatment, the latter application sequence of the two salts was three times more effective compared to the treatment with the sole antagonist, and one time when performed 24 h after the treatment. Interestingly, apples immersed in the sole 2% SBC solution had the highest percentage of decay during storage and when inoculated before moving to the simulated marketing period at 20 degrees C.

Serum TNF-α, IL-8, VEGF Levels in Helicobacter pylori Infection and Their Association with Degree of Gastritis

Directory of Open Access Journals (Sweden)

Gontar A Siregar

2015-04-01

Full Text Available Aim: to investigate the serum levels of TNF-α, IL-8, VEGF in Helicobacter pylori infection, and their association with the degrees of gastritis histopathology. Methods: a cross-sectional study was done on 80 consecutive gastritis patients admitted to endoscopy units at Adam Malik General Hospital and Permata Bunda Hospital, Medan, Indonesia from July-December 2014. The Rapid Urease test was used for the diagnosis of H. pylori infection. The severity of chronic inflammation, neutrophil infiltration, atrophy, and intestinal metaplasia were assessed. Serum samples were obtained to determine circulating TNF-α, IL-8, and VEGF. Univariate and bivariate analysis (chi square, fisher’s exact, and mann-whitney test were done using SPSS version-22. Results: there were 41.25% of 80 patients infected with Helicobacter pylori. Serum TNF-α and VEGF levels in the infected group were significantly higher compared to H. pylori negative, but there were no significant differences between serum levels of IL-8 in H. pylori positive and negative. There were significant associations between serum level of TNF-α and IL-8 with degree of chronic inflammation, and also between serum level of IL-8 and degree of neutrophil infiltration. There were significant associations between serum level of VEGF and degree of atrophy, and also between serum level of VEGF and degree of intestinal metaplasia. Conclusion: High levels of TNF-α were associated with severe degree of chronic inflammation, high levels of IL-8 associated with severe degree of chronic inflammation and neutrophil infiltration, and high levels of VEGF associated with severe degree of premalignant gastric lesion. Key words: cytokine, neoangiogenesis, Helicobacter pylori, atrophic gastritis, intestinal metaplasia.

Measuring Direct Teaching Costs: Does an Undergraduate Business Degree Cost More to Produce than a Nonbusiness Degree?

Science.gov (United States)

Barth, Michael M.; Karagiannidis, Iordanis

2016-01-01

Many universities have implemented tuition differentials for certain undergraduate degree programs, citing higher degree costs or higher demand. However, most college accounting systems are unsuited for measuring cost differentials by degree program. This research outlines a method that can convert commonly available financial data to a more…

Labeling schemes for bounded degree graphs

DEFF Research Database (Denmark)

Adjiashvili, David; Rotbart, Noy Galil

2014-01-01

We investigate adjacency labeling schemes for graphs of bounded degree Δ = O(1). In particular, we present an optimal (up to an additive constant) log n + O(1) adjacency labeling scheme for bounded degree trees. The latter scheme is derived from a labeling scheme for bounded degree outerplanar...... graphs. Our results complement a similar bound recently obtained for bounded depth trees [Fraigniaud and Korman, SODA 2010], and may provide new insights for closing the long standing gap for adjacency in trees [Alstrup and Rauhe, FOCS 2002]. We also provide improved labeling schemes for bounded degree...

Long-term stability of morphine hydrochloride in 0.9% NaCl infusion polyolefin bags after freeze-thaw treatment and in polypropylene syringes at 5 degrees C + 3 degrees C.

Science.gov (United States)

Hecq, J-D; Godet, M; Gillet, P; Jamart, J; Galanti, L

2014-01-01

The aim of this study was to investigate the long-term stability of morphine hydrochloride in 0.9% NaCI infusion polyolefin bags and polypropylene syringes after storage at 5 degrees C + 3 degrees C and to evaluate the influence of initial freezing and microwave thawing on this stability. Ten polyolefin bags and five polypropylene syringes containing 100 mL of 1 mg/mL of morphine hydrochloride solution in 0.9% NaCI were prepared under aseptic conditions. Five polyolefin bags were frozen at -20 degrees C for 90 days before storage. Immediately after the preparation and after thawing, 2 mL of each bag were withdrawn for the initial concentration measurements. All polyolefin bags and polypropylene syringes were then refrigerated at 5 degrees C + 3 degrees C for 58 days during which the morphine concentrations were measured periodically by high-performance liquid chromatography using a reversed-phase column, naloxone as internal standard, a mobile phase consisting of 5% acetonitrile and 95% of KH2PO4 buffer (pH 3.50), and detection with diode array detector at 254 nm. Visual and microscopic observations and spectrophotometric and pH measurements were also performed. Solutions were considered stable if the concentration remained superior to 90% of the initial concentration. The degradation products peaks were not quantitatively significant and were resolved from the native drug. Polyolefin bag and polypropylene syringe solutions were stable when stored at 5 degrees C + 3 degrees C during these 58 days. No color change or precipitation in the solutions was observed. The physical stability was confirmed by visual, microscopic, and spectrophotometric inspection. There was no significant change in pH during storage. Freezing and microwave thawing didn't influence the infusion stability. Morphine hydrochloride infusions may be prepared in advance by centralized intravenous additive service, frozen in polyolefin bags, and microwave thawed before storage under refrigeration

Lessons Learned: Creating an Online Business Degree from a Successful On-Campus Business Degree

Science.gov (United States)

Cordeiro, William P.; Muraoka, Dennis

2015-01-01

The horse has left the barn. Distance education is here to stay and the number of degree programs offered online is growing rapidly. California State University Channel Islands (CI) admitted its first students in 2002, and the undergraduate and graduate degrees in business were among its first program offerings. From its inception, the…

Risk of ovarian cancer in women with first-degree relatives with cancer

DEFF Research Database (Denmark)

Soegaard, Marie; Frederiksen, Kirsten; Jensen, Allan

2009-01-01

OBJECTIVE: To assess the risk of ovarian cancer in women with first-degree relatives with cancer at one of the four most frequent hereditary sites based on validated cancer diagnoses and to examine the association according to age at diagnosis of ovarian cancer and histology. DESIGN: Case......-control study. SETTING AND POPULATION: First-degree relatives of 554 women with invasive epithelial ovarian cancer and 1,564 controls were included. METHODS: Analyses were performed using multiple logistic regression models. RESULTS: Ovarian cancer in a first-degree relative was significantly associated...... with increased risk of ovarian cancer (OR, 2.4; 95% CI, 1.4-4.1 (mother or sister)). Ovarian cancer in a first-degree relative appeared to be a stronger risk factor for early-onset (cancer than late-onset (OR, 5.3; 95% CI, 2.0-14.1 vs. OR, 1.8; 95% CI, 1.0-3.4). The positive association...

Predictors of Associate's Degree Completion in Engineering and Engineering Technologies

Science.gov (United States)

Reys-Nickel, Lynsey L.

The purpose of this ex post facto study was to describe completers and non-completers of associate's degree programs in engineering and engineering technologies and determine whether and to what extent completion in these programs is a function of selected student-related variables and institutional variables. Data from the 2004/2009 Beginning Postsecondary Students Longitudinal Study (BPS: 04/09) of associate's degree completers and non-completers in engineering and engineering technologies were accessed and analyzed through PowerStats, a web-based data analysis tool from National Center for Education Statistics (NCES). Descriptive data indicated that, proportionally, engineering and engineering technologies completers were mostly White, married, middle income, employed part-time, enrolled full-time, did not hold a high school diploma or certificate, completed Trigonometry/Algebra II, had a father who's highest education level was an associate's degree, but did not know their mother's highest level of education, completed remedial coursework, and started college with the goal of earning an associate's degree. While more males enrolled in the programs, males and females demonstrated similar completion rates, proportionally--with females showing a slightly higher percentage of completion. Results from the logistic regression further indicated that the variables significant to completion in associate's degree programs in engineering and engineering technologies were gender and enrollment size. Findings suggested that female students were more likely to earn the degree, and that the larger the institution, the more likely the student would become a completer. However, since a major limitation of the study was the small weighted sample size, the results of the study are inconclusive in terms of the extent to which the findings can be generalized to the population of students in associate's degree programs in engineering and engineering technologies. This study fills a

Dietary habits of colorectal neoplasia patients in comparison to their first-degree relatives.

Science.gov (United States)

Kajzrlikova, Ivana Mikoviny; Vitek, Petr; Chalupa, Josef; Dite, Petr

2014-05-07

To compare the dietary habits between colorectal neoplasia patients, their first-degree relatives, and unrelated controls. From July 2008 to April 2011, we collected epidemiological data relevant to colorectal cancer from patients with colorectal neoplasias, their first-degree relatives, and also from a control group consisting of people referred for colonoscopy with a negative family history of colorectal cancer and without evidence of neoplasia after colonoscopic examination. The first-degree relatives were divided into two groups following the colonoscopic examination: (1) patients with neoplasia or (2) patients without neoplasia. Dietary habits of all groups were compared. A χ (2) test was used to assess the association between two dichotomous categorical variables. The study groups consisted of 242 patients with colorectal neoplasias (143 men, 99 women; mean age: 64 ± 12 years) and 160 first-degree relatives (66 men, 94 women; mean age: 48 ± 11 years). Fifty-five of the first-degree relatives were found to have a neoplastic lesion upon colonoscopy, while the remaining 105 were without neoplasia. The control group contained 123 individuals with a negative family history for neoplastic lesions (66 men, 57 women; mean age: 54 ± 12 years). Two hypotheses were tested. In the first, the dietary habits of first-degree relatives with neoplasia were more similar to those of patients with neoplasia, while the dietary habits of first-degree relatives without neoplasia were similar to those of the control group. In the second, no sex-related differences in dietary habits were expected between the particular groups. Indeed, no significant differences were observed in the dietary habits between the groups of patients, controls and first-degree relatives with/without neoplastic lesions. Nevertheless, statistically significant sex-related differences were observed in all groups, wherein women had healthier dietary habits than men. In all groups examined, women had

Pathways to a Four-Year Degree: Determinants of Degree Completion among Socioeconomically Disadvantaged Students.

Science.gov (United States)

Cabrera, Alberto F.; Burkum, Kurt R.; La Nasa, Steven M.

The High School Sophomore Cohort of 1980 followed nine different pathways to a 4-year college degree. These paths were formed by a combination of different levels of academic preparation secured in high school and the first type of postsecondary institution attended. The pathway most likely to lead to a 4-year degree is one defined by acquiring…

Enhanced reconstruction of weighted networks from strengths and degrees

International Nuclear Information System (INIS)

Mastrandrea, Rossana; Fagiolo, Giorgio; Squartini, Tiziano; Garlaschelli, Diego

2014-01-01

Network topology plays a key role in many phenomena, from the spreading of diseases to that of financial crises. Whenever the whole structure of a network is unknown, one must resort to reconstruction methods that identify the least biased ensemble of networks consistent with the partial information available. A challenging case, frequently encountered due to privacy issues in the analysis of interbank flows and Big Data, is when there is only local (node-specific) aggregate information available. For binary networks, the relevant ensemble is one where the degree (number of links) of each node is constrained to its observed value. However, for weighted networks the problem is much more complicated. While the naïve approach prescribes to constrain the strengths (total link weights) of all nodes, recent counter-intuitive results suggest that in weighted networks the degrees are often more informative than the strengths. This implies that the reconstruction of weighted networks would be significantly enhanced by the specification of both strengths and degrees, a computationally hard and bias-prone procedure. Here we solve this problem by introducing an analytical and unbiased maximum-entropy method that works in the shortest possible time and does not require the explicit generation of reconstructed samples. We consider several real-world examples and show that, while the strengths alone give poor results, the additional knowledge of the degrees yields accurately reconstructed networks. Information-theoretic criteria rigorously confirm that the degree sequence, as soon as it is non-trivial, is irreducible to the strength sequence. Our results have strong implications for the analysis of motifs and communities and whenever the reconstructed ensemble is required as a null model to detect higher-order patterns

Prevalence of open angle glaucoma in accompanying first degree relatives of patients with glaucoma

Directory of Open Access Journals (Sweden)

Franciele Vegini

2008-01-01

Full Text Available OBJECTIVE: The aim of this study was to determine the prevalence of open angle glaucoma in first-degree relatives accompanying POAG patients during routine examination in a reference hospital. METHOD: First-degree relatives of primary open angle glaucoma patients who accompanied their relatives to the glaucoma service of a reference hospital were screened for glaucoma. RESULTS: One-hundred and one first-degree relatives were examined, of which 56.4% had never had their intraocular pressure measured. 10.9% had previously been diagnosed with glaucoma, and 5.9% were newly diagnosed during this study. CONCLUSIONS: The eye examination of first-degree relatives identified a significant percentage of individuals with glaucoma. Despite being first-degree relatives of glaucoma patients, 56.4% of the companions had never had their eye pressure measured, demonstrating a lack of awareness about this disease.

The degree of horizontal violence in RNs practicing in New York State.

Science.gov (United States)

Sellers, Kathleen F; Millenbach, Linda; Ward, Kathy; Scribani, Melissa

2012-10-01

This study examined the degree of horizontal violence (HV) among RNs practicing in New York State (NYS). The objective was to determine the knowledge of HV and the degree of being a victim among practicing RNs. A descriptive survey using Briles' Sabotage Savvy Questionnaire, measuring occurrences of HV and nurses' knowledge of HV, was conducted among 2659 RNs in NYS hospitals. Findings demonstrate a significantly greater (P leadership, and individual interventions to address HV helps create a culture of safety.

[Significance of the doctorate in scientific medical education].

Science.gov (United States)

Frosch, Matthias

2018-02-01

According to European and German law, the medical education of physicians must take place in a scientific degree program at a university or under the supervision of a university. To keep up the ideal of a scientific degree program, various organizations and associations, such as the German Research Foundation, the German Council of Science and Humanities and the German Medical Faculty Association, see the need for an even stronger anchoring of academic learning content in the course of study. Traditionally, a scientific project, which is carried out during the studies, provides the basis for the Doctor of Medicine (Dr. med.) after graduation, although the research projects as a basis for medical degrees are currently not obligatory parts of the curricula. The number of medical students performing such research projects is significantly decreasing, thus they are missing major skills for working in science. To counteract these developments, faculties of medicine are currently developing model curricula including deepened scientific education. Despite these efforts, the German Association of Faculties of Medicine argues that the performance of research projects leading to the doctoral degree is most suitable for obtaining expertise in scientific work. According to recommendations by the German Council of Science on the requirements for quality assurance of graduation doctoral degree programs have been introduced. This and further measures, like MD/PhD programs or research-based additional study programs serving the scientific qualification of medical students, are the subject of this article.

The solubilities of significant organic compounds in HLW tank supernate solutions

International Nuclear Information System (INIS)

Barney, G.S.

1994-08-01

Large quantities of organic chemicals used in reprocessing spent nuclear-fuels at the Hanford Site have accumulated in underground high-level radioactive waste tanks. The organic content of these tanks must he known so that the potential for hazardous reactions between organic components and sodium nitrate/nitrite salts in the waste can he evaluated. The solubilities of organic compounds described in this report will help determine if they are present in the solid phases (salt cake and sludges) as well as the liquid phase (interstitial liquor/supernate) in the tanks. The solubilities of five significant sodium salts of carboxylic acids and aminocarboxylic acids [sodium oxalate, formate, citrate, nitrilotriacetate (NTA) and ethylendiaminetetraacetate (EDTA)] were measured in a simulated supernate solution at 25 degrees C, 30 degrees C, 40 degrees C, and 50 degrees C

Current Trends in Communication Graduate Degrees: Survey of Communications, Advertising, PR, and IMC Graduate Programs

Science.gov (United States)

Quesenberry, Keith A.; Coolsen, Michael K.; Wilkerson, Kristen

2015-01-01

A survey of 61 master's degree advertising programs reveals significant trends in program titles, curriculum design, course delivery, and students served. The results provide insight for current and planned master's degree programs as research predicts a continued increase in demand for master's education over the next decade. Survey results are…

The contributions of differing degrees of acute and chronic malnutrition to the intellectual development of Jamaican boys.

Science.gov (United States)

Richardson, S A; Koller, H; Katz, M; Albert, K

1978-07-01

The purpose of this paper is to determine whether differing degrees and types of malnutrition cause differing degrees of mental impairment. Subjects were 59 Jamaican boys hospitalized for malnutrition in infancy and whose intelligence was assessed at school age. The measure used for degree of chronic malnutrition was height for age and for acute malnutrition weight for height. The measure of intelligence was the I.Q. (WISC). Because the social environment in which a child lives influences his intellectual development, a measure of social background was used as an independent variable in addition to the nutrition measures. Social background showed a significant effect on I.Q. but neither measure of nutrition was significant. A further analysis using comparisons who had not been hospitalized for malnutrition suggests that malnutrition may contribute to mental impairment, through a threshold effect rather than acting as a continuous variable where increasing degrees of malnutrition cause increasing degrees of mental impairment.

[Effect of 45 degree angle semirecumbent position on ventilator-associated pneumonia in mechanical ventilated patients: a meta-analysis].

Science.gov (United States)

Leng, Yu-xin; Song, Ya-han; Yao, Zhi-yuan; Zhu, Xi

2012-10-01

To systemically analyze the effect of 45 degree angle semirecumbent position on the incidence of ventilator-associated pneumonia (VAP) and other outcomes in mechanical ventilated patients, and to evaluate whether 45 degree angle semirecumbent position is superior to 25 degree angle-30 degree angle head of bed (HOB). The randomized controlled trials (RCTs) comparing the effect of different HOB on the outcomes of mechanical ventilated patients were searched (from 1st January 1990 to 20th July 2012) from five databases including the Cochrane Central Register of Controlled Trials, MEDLINE, Embase, China Knowledge Resource Integrated Database (CNKI), and Wanfang Database. Meta analysis was conducted using RevMan 5.0 software. Data extracted from five RCTs with a total of 427 patients were analyzed. The risks of developing clinically diagnosed VAP were significantly lower among the patients in semirecumbent 45 degree angle position compared to the patients in lower position [15.96% (34/213) vs. 26.64% (57/214), relative risk (RR)=0.57, 95% confidence interval (95%CI) 0.39 to 0.83, P=0.003], while no significant differences were detected between the two groups regarding the mortality rate [27.04% (53/196) vs. 28.22% (57/202), RR=0.93, 95%CI 0.68 to 1.27, P=0.66], the length of intensive care unit (ICU) stay [weighted mean difference (WMD)=-0.45, 95%CI -1.08 to 0.18, P=0.16] and the percentage of antibiotics treatment [71.11% (32/45) vs. 60.87% (28/46), RR=1.14, 95%CI 0.85 to 1.53, P=0.37]. Two of the five trials (91 patients) were included in the sub-analysis between 45 degree angle group (45 patients) and 25 degree angle-30 degree angle group (46 patients). The results showed that comparing with 25 degree angle-30 degree angle, 45 degree angle semirecumbent position had no significance in improving patients' clinical outcomes. This study proved that the clinically preferred semirecumbent 45 degree angle position did have effect in reducing the incidence of VAP

An examination of the factors related to women's degree attainment and career goals in science, technology, and mathematics

Science.gov (United States)

Nitopi, Marie

During the last 30 years, women have made tremendous advances in educational attainment especially in post-secondary education. Despite these advances, recent researchers have revealed that women continue to remain underrepresented in attainment of graduate degrees in the sciences. The researcher's purpose in this study was to extend previous research and to develop a model of variables that significantly contribute to persistence in and attainment of a graduate degree and an eventual career in the science, mathematics, or technology professions. Data were collected from the Baccalaureate and Beyond Longitudinal Study (B&B:93/03). Variables in the categories of demographics, academics, finances, values and attitudes toward educational experiences, and future employment were analyzed by t tests and logistic regressions to determine gender differences in graduate degree attainment and career goals by male and female who majored in science, technology and mathematics. Findings supported significant gender differences in expectations for a graduate degree, age at baccalaureate degree attainment, number of science and engineering credits taken, and the value of faculty interactions. Father's education had a significant effect on degree attainment. Women and men had similar expectations at the beginning of their educational career, but women tended to fall short of their degree expectations ten years later. A large proportion of women dropped out of the science pipeline by choosing different occupations after degree completion. Additionally, women earned fewer science and math credits than men. The professions of science and technology are crucial for the nation's economic growth and competitiveness; therefore, additional researchers should focus on retaining both men and women in the STEM professions.

Physics to a degree

CERN Document Server

Thomas, EG

2014-01-01

Physics to a Degree provides an extensive collection of problems suitable for self-study or tutorial and group work at the level of an undergraduate physics course. This novel set of exercises draws together the core elements of an undergraduate physics degree and provides students with the problem solving skills needed for general physics' examinations and for real-life situations encountered by the professional physicist. Topics include force, momentum, gravitation, Bernoulli's Theorem, magnetic fields, blackbody radiation, relativistic travel, mechanics near the speed of light, radioactive

Degree of Milling Effect on Cold Water Rice Quality

Directory of Open Access Journals (Sweden)

Ujjwol Subedi

2018-05-01

Full Text Available The aim of this study was to examine the effects of degree of milling on various rice parameters such as proximate composition, and cooking properties using mathematical model. The experiments were performed in the laboratory of Food Research Division, Nepal Agricultural Research Council. The three different medium type rice varieties of Nepal (Lumle-2, Chhomrong and Machhapuchre-3 were exposed to five different degrees of milling (0%, 6%, 8%, 10% and 12%. The degree of milling (DM level significantly (P≤0.05 affected the milling recovery; head rice yield, nutrient content as well as cooking properties of the rice. Increase in DM resulted in further reduction of protein content, fat content, minerals, milled rice and head rice yield after bran layer was further removed. A positive correlation between DM used in present model, amylose content, kernel elongation and gruel solid loss was observed, however, with an increase in DM; amylose content, kernel elongation and gruel solid loss were found to be increased. Adopting 6 to 8% DM for commercial milling of rice might help to prevent quantitative, qualitative and nutritional loss along with retention of good cooking characteristics.

Does a bachelor’s degree pay off?

DEFF Research Database (Denmark)

Neugebauer, Martin; Weiss, Felix

Academic education is generally rewarded by employers, but what happens to graduates if they are trained for two years less and have to compete with vocationally trained labor market entrants in a similar field of study? Focusing on Germany, we analyze labor market entries of individuals eligible...... for higher education, who either opted for newly introduced short bachelor’s degrees, or for well-established vocational degrees. Based on Microcensus data, we find that bachelor’s degrees from classical universities are associated with higher earnings and more prestigious jobs than initial vocational...... training degrees, and with higher prestige (but similar earnings) than further vocational degrees. However, bachelor’s degrees from universities are also related to higher risks of unemployment or fixed-term employment. Universities of applied sciences, which combine academic and practical training, offer...

Astrometric studies of the regions BD + 17 degree 4946, BD -5 degree 3071, and Ross 730-1

International Nuclear Information System (INIS)

Russell, J.; Gatewood, G.

1975-01-01

Positions, proper motions, and absolute parallaxes were found for 46 stars in the regions of BD +17 degree4946, BD -5 degree3071, and Ross 730-1. BD +17 degree4946 showed some evidence of irregular variations in position and magnitude. The residuals for Ross 730-1 were used in a preliminary study to test for an appropriate weighting system; a weak weighting system was indicated. (auth)

Exact sampling of graphs with prescribed degree correlations

Science.gov (United States)

Bassler, Kevin E.; Del Genio, Charo I.; Erdős, Péter L.; Miklós, István; Toroczkai, Zoltán

2015-08-01

Many real-world networks exhibit correlations between the node degrees. For instance, in social networks nodes tend to connect to nodes of similar degree and conversely, in biological and technological networks, high-degree nodes tend to be linked with low-degree nodes. Degree correlations also affect the dynamics of processes supported by a network structure, such as the spread of opinions or epidemics. The proper modelling of these systems, i.e., without uncontrolled biases, requires the sampling of networks with a specified set of constraints. We present a solution to the sampling problem when the constraints imposed are the degree correlations. In particular, we develop an exact method to construct and sample graphs with a specified joint-degree matrix, which is a matrix providing the number of edges between all the sets of nodes of a given degree, for all degrees, thus completely specifying all pairwise degree correlations, and additionally, the degree sequence itself. Our algorithm always produces independent samples without backtracking. The complexity of the graph construction algorithm is {O}({NM}) where N is the number of nodes and M is the number of edges.

ALICE Zero Degree Calorimeter

CERN Multimedia

De Marco, N

2013-01-01

Two identical sets of calorimeters are located on both sides with respect to the beam Interaction Point (IP), 112.5 m away from it. Each set of detectors consists of a neutron (ZN) and a proton (ZP) Zero Degree Calorimeter (ZDC), positioned on remotely controlled platforms. The ZN is placed at zero degree with respect to the LHC beam axis, between the two beam pipes, while the ZP is positioned externally to the outgoing beam pipe. The spectator protons are separated from the ion beams by means of the dipole magnet D1.

Thermal cracking in Lac du Bonnet granite during slow heating to 205 degrees celsius

International Nuclear Information System (INIS)

Chernis, P.J.; Robertson, P.B.

1993-09-01

Acoustic emissions (AE) were recorded as drill core samples of Lac du Bonnet granite were slowly heated to between 66 and 205 degrees celsius to evaluate the effects of temperature on the properties of rock samples. Longitudinal and shear velocities of the samples were measured, and Young's moduli, shear moduli and Poisson's ratios were calculated. No significant AE activity was detected until temperatures reached approximately 73-80 degrees celsius. Above this 'threshold' temperature, calculated rock properties decreased, and at 205 degrees celsius calculated Young's modulus, shear modulus, and Poisson's ratio were reduced by 30, 26, and 29% respectively

Mentoring to Degree Completion: Expanding the Horizons of Doctoral Proteges

Science.gov (United States)

Creighton, Linda; Creighton, Theodore; Parks, David

2010-01-01

The authors of this discussion identify one of the most pressing issues facing American universities: the number of graduate students who fail to graduate. We review the literature and further analyze the student and institutional factors most significant in predicting the degree completion rates of graduate students in education. Based on the…

Providing Homeless Adults with Advantage: A Sustainable University Degree Program

Science.gov (United States)

Sinatra, Richard; Lanctot, Melissa Kim

2016-01-01

A university partnered with the New York City Department of Homeless Services (NYC DHS) to provide cohorts of adults a 60-credit Associate Degree Program in Business Administration over a 2-year period. Results of two cohorts of 30 Advantage Academy Program graduates revealed significant improvement in College Board AccuPlacer (ACPL) Arithmetic…

Chemistry teaching in the new degrees of Agricultural Engineering

Science.gov (United States)

Arce, Augusto; Tarquis, Ana Maria; Castellanos, Maria Teresa; Requejo, Maria Isabel; Cartagena, Maria Carmen

2013-04-01

The academic year 2011-12 is the second one implementing Bologna process in ETSI at the subjects of Agricultural Chemistry I and Chemistry II in the new four Degrees: Graduate in Engineering and Agricultural Science, Food Engineering Graduate, Graduate Environmental and engineering Graduate in Biotechnology, for it has been necessary to design and implement new interactive methodologies in the teaching-learning process based on the use of the virtual platform of the UPM, implement new evaluation systems that promote continued participation active student and the development of educational materials to support the subjects of chemistry designed new degrees within the EEES. In addition to the above actions, an assessment test prior chemistry knowledge has been made to all students who enter into Agricultural Grades, improving laboratory practices and the comparative study of academic obtained by the students of the new grades in the subjects of chemistry during the year 2011-12 compared to the 2010-11 academic year. More than 15,000 data have showed a good correlation between the student's prior knowledge, the level test performed, test scores, the overall success rate of the course and the abandonment of the different degrees. Academic results show a higher percentage of students enrolled and presented on a greater number of passes on students enrolled in the 2011-12 academic year for students enrolled in the previous academic year. The improved results have influenced the actions taken and the level of knowledge with students entering. Finally, we propose possible solutions to fix these results in future courses, aiming to improve the degree of efficiency, success and significant absenteeism in the first year as it will condition the dropout rate of these new degrees. Acknowledgements: Proyecto de Innovación Educativa N° IE02054-11/12 UPM. 2012.

The Relation between Degree and Strength in the Complex Network Derived from an Individual Stock

Directory of Open Access Journals (Sweden)

Zelin Zhang

2016-01-01

Full Text Available A method based on coarse-graining to construct a directed weighted complex network which models the transformation of the trading data of an individual stock is introduced. The degree (strength distribution of derived network follows a power-law. A moderated regression equation with interaction effects of average return and out-degree (in-degree on out-strength (in-strength is established. Moreover, we found that the differences of nodes affect the network’s structure and average return level impacts nodes’ eigenvector centrality and pagerank, significantly.

Research Degrees as Professional Education?

Science.gov (United States)

Barnacle, Robyn; Dall'Alba, Gloria

2011-01-01

There is an increasing trend within higher education and, more specifically, in higher degrees by research, to treat a professional skills set as a desirable graduate outcome. The increasing value that is being placed on a professional skills set in large part reflects growing interest around the world in the role of research degrees in labour…

Degree of neutrophil, atrophy, and metaplasia intestinal were associate with malondialdehyde level in gastritis patients

Science.gov (United States)

Siregar, G. A.; Sari, D. K.; Sungkar, T.

2018-03-01

The main pathogenesis of gastritis is inflammation that closely related to free radicals. Malondialdehyde (MDA) is a free radical biomarker and is found to increase in gastritis patients. However, these studies are generally performed on experimental animals as well as MDA examination in gastric mucosa. This study aim was to determine the association of degrees of gastritis (degree of lymphocyte infiltration, neutrophil activity, atrophy, and intestinal metaplasia) with plasma MDA level. A cross-sectional study of 80 consecutive gastritis patients who came to an endoscopic unit of Adam Malik General Hospital in Medan, Indonesia, from May–September 2017. Assessed for severity of chronic inflammatory, neutrophil activity, atrophy, and intestinal metaplasia refers to Updated Sydney System. Plasma MDA levels were examined using an HPLC MDA kit. Univariate analysis, bivariate (chi-square and Fisher exact test), and multivariate (binary logistic regression test) were programmed with SPSS version 22. There was no significant association between degree of lymphocyte infiltration with MDA level. There were significant associations between degree of neutrophil activity, atrophy, and intestinal metaplasia with MDA level (p=0.039, 0.003, 0.021; respectively). The moderate+severe degree of neutrophil activity, atrophy, and intestinal metaplasia were associated with high level of MDA.

A Gadamerian Phenomenological Study Examining the Meaning of Having a Bachelor's Degree Expressed by Associate Degree Nurses (ADN) Who Educationally Transitioned to a Baccalaureate Degree in Nursing (BSN)

Science.gov (United States)

Sauld, Jill Pierpont

2017-01-01

Since the inception of associate degree nursing programs, professional nursing conversations and debate have grappled with reckoning differences between the associate degree in nursing (ADN) and the bachelor's degree in nursing (BSN). Research reporting better patient outcomes with more baccalaureate prepared nurses has been a driving force for…

Flyby Characterization of Lower-Degree Spherical Harmonics Around Small Bodies

Science.gov (United States)

Takahashi, Yu; Broschart, Stephen; Lantoine, Gregory

2014-01-01

Interest in studying small bodies has grown significantly in the last two decades, and there are a number of past, present, and future missions. These small body missions challenge navigators with significantly different kinds of problems than the planets and moons do. The small bodies' shape is often irregular and their gravitational field significantly weak, which make the designing of a stable orbit a complex dynamical problem. In the initial phase of spacecraft rendezvous with a small body, the determination of the gravitational parameter and lower-degree spherical harmonics are of crucial importance for safe navigation purposes. This motivates studying how well one can determine the total mass and lower-degree spherical harmonics in a relatively short time in the initial phase of the spacecraft rendezvous via flybys. A quick turnaround for the gravity data is of high value since it will facilitate the subsequent mission design of the main scientific observation campaign. We will present how one can approach the problem to determine a desirable flyby geometry for a general small body. We will work in the non-dimensional formulation since it will generalize our results across different size/mass bodies and the rotation rate for a specific combination of gravitational coefficients.

Self-esteem and self-efficacy as predictors of attrition in associate degree nursing students.

Science.gov (United States)

Peterson-Graziose, Virginia; Bryer, Jennifer; Nikolaidou, Maria

2013-06-01

There is a serious and growing shortage of nurses in the United States, and the high rate of student attrition from nursing programs has further added to this problem. The challenge for schools of nursing is to recruit increased numbers of qualified candidates into their programs and to determine ways to decrease the rate of student attrition. The purpose of this study was to determine whether self-esteem, self-efficacy, and life stressors were significantly related to student attrition in first-semester associate degree nursing students. A descriptive correlational design and nonprobability convenience sample of first-semester associate degree nursing students was used. Data were gathered using the Rosenberg Self-Esteem Scale, the General Self-Efficacy Scale, and the Holmes and Rahe Social Readjustment Rating Scale. Findings indicated that self-esteem was significantly associated with student attrition. Results from this study provide the basis for targeted interventions designed to decrease student attrition rates in associate degree nursing programs. Copyright 2013, SLACK Incorporated.

THE ROLE AND SIGNIFICANCE OF HOMEWORK IN INITIAL MATHEMATICS TEACHING

Directory of Open Access Journals (Sweden)

Sead Rešić

2013-02-01

Full Text Available This thesis elaborates on the role and importance of homework in the initial stages of teaching mathematics. The aim is to determine and analyze the degree of burden on students with homework. The following tasks were performed as a starting point for this research: determining the degree of correlation between the time that student spends on weekly homework and the student’s homework amount determinedby the pedagogical norm, determining the level of parents’ participation in helping students with homework, etermining the degree of correlation of differentiation of homework with the students' motivation for doing homework. Homework plays an important role in the initial stages of teaching mathematics, and takes up a significant place in the process of studying and teaching mathematics. The results, analysis, and conclusions are presented upon research.

Nuclear engineering enrollments and degrees, 1981

International Nuclear Information System (INIS)

Little, J.R.; Shirley, D.L.

1982-05-01

This report presents data on the number of students enrolled and the degrees awarded in academic year 1980-81 from 73 US institutions offering degree programs in nuclear engineering or nuclear options within other engineering fields. Presented here are historical data for the last decade, which provide information such as trends by degree level, foreign national student participation, female and minority student participation, and placement of graduates. Also included is a listing of the universities by type of program and number of students

Variation in meroplankton along 78 degrees E Meridian

Digital Repository Service at National Institute of Oceanography (India)

Balachandran, T.; Peter, K.J.

Variations along the meridian 78 degrees E between 8 degrees N and 25 degrees S, based on 43 zooplankton samples were studied. Fish larvae exhibited fluctuations in abundance (26 to 57 specimens/IOSN haul) in the three zones studied (8 degrees N-5...

Condensation of ablated first-wall materials in the cascade inertial confinement fusion reactor

International Nuclear Information System (INIS)

Ladd, A.J.C.

1985-01-01

This report concerns problems involved in recondensing first-wall materials vaporized by x rays and pellet debris in the Cascade inertial confinement fusion reactor. It examines three proposed first-wall materials, beryllium oxide (BeO), silicon carbide (SiO), and pyrolytic graphite (C), paying particular attention to the chemical equilibrium and kinetics of the vaporized gases. The major results of this study are as follows. Ceramic materials composed of diatomic molecules, such as BeO and SiC, exist as highly dissociated species after vaporization. The low gas density precludes significant recombination during times of interest (i.e., less than 0.1 s). The dissociated species (Be, O, Si, and C) are, except for carbon, quite volatile and are thermodynamically stable as a vapor under the high temperature and low density found in Cascade. These materials are thus unsuitable as first-wall materials. This difficulty is avoided with pyrolytic graphite. Since the condensation coefficient of monatomic carbon vapor (approx. 0.5) is greater than that of the polyatomic vapor (<0.1), recondensation is assisted by the expected high degree of dissociation. The proposed 10-layer granular carbon bed is sufficient to condense all the carbon vapor before it penetrates to the BeO layer below. The effective condensation coefficient of the porous bed is about 50% greater than that of a smooth wall. An estimate of the mass flux leaving the chamber results in a condensation time for a carbon first wall of about 30 to 50 ms. An experiment to investigate condensation in a Cascade-like chamber is proposed

Improvement of the SEP protocol based on community structure of node degree

Science.gov (United States)

Li, Donglin; Wei, Suyuan

2017-05-01

Analyzing the Stable election protocol (SEP) in wireless sensor networks and aiming at the problem of inhomogeneous cluster-heads distribution and unreasonable cluster-heads selectivity and single hop transmission in the SEP, a SEP Protocol based on community structure of node degree (SEP-CSND) is proposed. In this algorithm, network node deployed by using grid deployment model, and the connection between nodes established by setting up the communication threshold. The community structure constructed by node degree, then cluster head is elected in the community structure. On the basis of SEP, the node's residual energy and node degree is added in cluster-heads election. The information is transmitted with mode of multiple hops between network nodes. The simulation experiments showed that compared to the classical LEACH and SEP, this algorithm balances the energy consumption of the entire network and significantly prolongs network lifetime.

Different behaviors of epidemic spreading in scale-free networks with identical degree sequence

Energy Technology Data Exchange (ETDEWEB)

Chu Xiangwei; Guan Jihong [School of Electronics and Information, Tongji University, 4800 Cao' an Road, Shanghai 201804 (China); Zhang Zhongzhi; Zhou Shuigeng [School of Computer Science, Fudan University, Shanghai 200433 (China); Li Mo, E-mail: zhangzz@fudan.edu.c, E-mail: jhguan@tongj.edu.c, E-mail: sgzhou@fudan.edu.c [Software School, Fudan University, Shanghai 200433 (China)

2010-02-12

Recently, the study of dynamical behaviors of the susceptible-infected (SI) disease model in complex networks, especially in Barabasi-Albert (BA) scale-free networks, has attracted much attention. Although some interesting phenomena have been observed, the formative reasons for those particular dynamical behaviors are still not well understood, despite the speculation that topological properties (for example the degree distribution) have a strong impact on epidemic spreading. In this paper, we study the evolution behaviors of epidemic spreading on a class of scale-free networks sharing identical degree sequence, and observe significantly different evolution behaviors in the whole family of networks. We show that the power-law degree distribution does not suffice to characterize the dynamical behaviors of disease diffusion on scale-free networks.

Different behaviors of epidemic spreading in scale-free networks with identical degree sequence

International Nuclear Information System (INIS)

Chu Xiangwei; Guan Jihong; Zhang Zhongzhi; Zhou Shuigeng; Li Mo

2010-01-01

Recently, the study of dynamical behaviors of the susceptible-infected (SI) disease model in complex networks, especially in Barabasi-Albert (BA) scale-free networks, has attracted much attention. Although some interesting phenomena have been observed, the formative reasons for those particular dynamical behaviors are still not well understood, despite the speculation that topological properties (for example the degree distribution) have a strong impact on epidemic spreading. In this paper, we study the evolution behaviors of epidemic spreading on a class of scale-free networks sharing identical degree sequence, and observe significantly different evolution behaviors in the whole family of networks. We show that the power-law degree distribution does not suffice to characterize the dynamical behaviors of disease diffusion on scale-free networks.

How Adult Online Graduates Portray Their Degree

Science.gov (United States)

Hagan, Eric J.

2013-01-01

This qualitative case study investigated how adult graduates of online Bachelor's degree programs describe the online aspect of their degree. Online education is promoted as a method for adult students to access the benefits of a college degree. Therefore, it is important for prospective online students, higher education institutions and…

Career Paths for Physics Degree Recipients

Science.gov (United States)

Mulvey, Patrick

Physics degree holders have a diverse set of career opportunities open to them. So what are these opportunities? Where are they employed? How much do they earn? What skills will they need? Physics degrees make up a small proportion of the degrees conferred in the US but they play an important role in meeting workforce needs at many levels. This talk will give an overview of the employment outcomes of physics bachelors, masters and PhDs. It will discuss the diverse set fields they work in and the skills they use.

Degree and connectivity of the Internet's scale-free topology

International Nuclear Information System (INIS)

Zhang Lian-Ming; Wu Xiang-Sheng; Deng Xiao-Heng; Yu Jian-Ping

2011-01-01

This paper theoretically and empirically studies the degree and connectivity of the Internet's scale-free topology at an autonomous system (AS) level. The basic features of scale-free networks influence the normalization constant of degree distribution p(k). It develops a new mathematic model for describing the power-law relationships of Internet topology. From this model we theoretically obtain formulas to calculate the average degree, the ratios of the k min -degree (minimum degree) nodes and the k max -degree (maximum degree) nodes, and the fraction of the degrees (or links) in the hands of the richer (top best-connected) nodes. It finds that the average degree is larger for a smaller power-law exponent λ and a larger minimum or maximum degree. The ratio of the k min -degree nodes is larger for larger λ and smaller k min or k max . The ratio of the k max -degree ones is larger for smaller λ and k max or larger k min . The richer nodes hold most of the total degrees of Internet AS-level topology. In addition, it is revealed that the increased rate of the average degree or the ratio of the k min -degree nodes has power-law decay with the increase of k min . The ratio of the k max -degree nodes has a power-law decay with the increase of k max , and the fraction of the degrees in the hands of the richer 27% nodes is about 73% (the ‘73/27 rule’). Finally, empirically calculations are made, based on the empirical data extracted from the Border Gateway Protocol, of the average degree, ratio and fraction using this method and other methods, and find that this method is rigorous and effective for Internet AS-level topology. (interdisciplinary physics and related areas of science and technology)

Degree-based graph construction

International Nuclear Information System (INIS)

Kim, Hyunju; Toroczkai, Zoltan; Erdos, Peter L; Miklos, Istvan; Szekely, Laszlo A

2009-01-01

Degree-based graph construction is a ubiquitous problem in network modelling (Newman et al 2006 The Structure and Dynamics of Networks (Princeton Studies in Complexity) (Princeton, NJ: Princeton University Press), Boccaletti et al 2006 Phys. Rep. 424 175), ranging from social sciences to chemical compounds and biochemical reaction networks in the cell. This problem includes existence, enumeration, exhaustive construction and sampling questions with aspects that are still open today. Here we give necessary and sufficient conditions for a sequence of nonnegative integers to be realized as a simple graph's degree sequence, such that a given (but otherwise arbitrary) set of connections from an arbitrarily given node is avoided. We then use this result to present a swap-free algorithm that builds all simple graphs realizing a given degree sequence. In a wider context, we show that our result provides a greedy construction method to build all the f-factor subgraphs (Tutte 1952 Can. J. Math. 4 314) embedded within K n setmn S k , where K n is the complete graph and S k is a star graph centred on one of the nodes. (fast track communication)

Infrared reflection absorption study of water interaction with H ...

Indian Academy of Sciences (India)

Unknown

Silicon crystal has diamond lattice structure with sp3 hybridization. The surfaces .... using ceramic heater (pyrolytic graphite/pyrolytic boron nitride). The sample ... considerable structural changes due to large scale decomposition of water and ...

Competency-Based Business Degree. Issue Brief

Science.gov (United States)

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

In January 2015, thirteen Washington community colleges launched an online, competency-based business transfer degree--the first in the state's community and technical college system. This issue brief provides answers to commonly asked questions about the new competency-based degree.

Development of a sensor for L-Dopa based on Co(DMG)(2)ClPy/multi-walled carbon nanotubes composite immobilized on basal plane pyrolytic graphite electrode.

Science.gov (United States)

Leite, Fernando Roberto Figueirêdo; Maroneze, Camila Marchetti; de Oliveira, Adriano Bof; dos Santos, Wallans Torres Pio; Damos, Flavio Santos; Silva Luz, Rita de Cássia

2012-08-01

L-Dopa is the immediate precursor of the neurotransmitter dopamine, being the most widely prescribed drug in the treatment of Parkinson's disease. A sensitive and selective method is presented for the voltammetric determination of L-Dopa in pharmaceutical formulations using a basal plane pyrolytic graphite (BPPG) electrode modified with chloro(pyridine)bis(dimethylglyoximato)cobalt(III) (Co(DMG)(2)ClPy) absorbed in a multi-walled carbon nanotube (MWCNT). Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy were used to characterize the materials. The electrocatalytical oxidation of L-Dopa using the Co(DMG)(2)ClPy/MWCNT/BPPG electrode was investigated by cyclic voltammetry and square wave voltammetry. The parameters that influence the electrode response (the amount of Co(DMG)(2)ClPy and of MWCNT, buffer solution, buffer concentration, buffer pH, frequency and potential pulse amplitude) were investigated. Voltammetric peak currents showed a linear response for L-Dopa concentration in the range of 3 to 100 μM, with a sensitivity of 4.43 μAcm(-2)/μM and a detection limit of 0.86 μM. The related standard deviation for 10 determinations of 50 μM L-Dopa was 1.6%. The results obtained for L-Dopa determination in pharmaceutical formulations (tablets) were in agreement with the compared official method. The sensor was successfully applied for L-Dopa selective determination in pharmaceutical formulations. Copyright © 2012 Elsevier B.V. All rights reserved.

Six-degree-of-freedom active vibration isolation using a Stewart platform mechanism

Science.gov (United States)

Geng, Zheng; Haynes, Leonard S.

1993-01-01

The design and control problems of a class of multidegree-of-freedom vibration isolation systems (VISs) based on a Stewart platform mechanism are studied. A prototype of a six-degree-of-freedom VIS for precision control of a wide range of space-based structures implemented in Intelligent Automation, Inc. is described. The feasibility of using a Stewart platform to achieve 6-degree-of-freedom vibration control in space applications is shown. A new Terfenol-D actuator characterized by significantly longer stroke than any commercially available Terfenol-D actuator and direct flux and strain sensors integral to the actuator is described.

Actuator with Multi Degrees of Freedom(Actuator)

OpenAIRE

矢野, 智昭; Tomoaki, YANO; 産業技術総合研究所

2006-01-01

The advantages, problems and the recent developments of the actuator with multi degrees of freedom are presented. At first, the advantages of the actuator with multi degrees of freedom are described. Next, the problems needed to solve for practical use are presented. The recent applications of the actuator with multi degrees of freedom are also reviewed.

Lens positioner with five degrees of freedom

International Nuclear Information System (INIS)

Kobierecki, M.W.; Rienecker, F. Jr.

1978-01-01

A device for positioning lenses precisely with five degrees of freedom (three translations and two angular rotations). The unique features of the device are its compact design, large clear aperture, and high degree of positioning accuracy combined with five degrees of freedom in axis motion. Thus, the device provides precision and flexibility in positioning of optical components

High degree modes and instrumental effects

Energy Technology Data Exchange (ETDEWEB)

Korzennik, S G [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States); Rabello-Soares, M C; Schou, J [Stanford University, Stanford, CA (United States)], E-mail: skorzennik@cfa.harvard.edu

2008-10-15

Full-disk observations taken with the Michelson Doppler Imager (MDI) on board the Solar and Heliospheric Observatory (SOHO) spacecraft, or the upgraded Global Oscillations Network Group (GONG) instruments, have enough spatial resolution to resolve modes up to {iota} = 1000 if not {iota} = 1500. The inclusion of such high-degree modes (i.e., {iota} {<=} 1000) improves dramatically inferences near the surface. Unfortunately, observational and instrumental effects cause the characterization of high degree modes to be quite complicated. Indeed, the characteristics of the solar acoustic spectrum are such that, for a given order, mode lifetimes get shorter and spatial leaks get closer in frequency as the degree of a mode increases. A direct consequence of this property is that individual modes are resolved only at low and intermediate degrees. At high degrees the individual modes blend into ridges and the power distribution of the ridge defines the ridge central frequency, masking the underlying mode frequency. An accurate model of the amplitude of the peaks that contribute to the ridge power distribution is needed to recover the underlying mode frequency from fitting the ridge. We present a detailed discussion of the modeling of the ridge power distribution, and the contribution of the various observational and instrumental effects on the spatial leakage, in the context of the MDI instrument. We have constructed a physically motivated model (rather than an ad hoc correction scheme) that results in a methodology that can produce unbiased estimates of high-degree modes. This requires that the instrumental characteristics are well understood, a task that has turned out to pose a major challenge. We also present our latest results, where most of the known instrumental and observational effects that affect specifically high-degree modes were removed. These new results allow us to focus our attention on changes with solar activity. Finally, we present variations of mode

Absorbing materials of thin film for photovoltaic structures prepared by the process of pyrolytic spraying; Materiales absorbedores en pelicula delgada para estructuras fotovoltaicas preparados por el proceso de rocio pirolitico

Energy Technology Data Exchange (ETDEWEB)

Calixto Rodriguez, Manuela

2006-11-15

In this thesis work thin semiconducting films were grown with the following compounds: In{sub 2}S{sub 3}, Ag{sub 2}S, AgInS{sub 2}, SnS{sub 2} and SnS with the pyrolytic spray technique. The structural, optical and electrical proposals of these films were analyzed to determine the set of deposit parameters in which are obtained the physical properties for the applications of the same in photovoltaic structures. It was found that the molar relation in solution of the departing compounds and the deposit temperature are the same dominant parameters in the process of growing the films. For the deposit of thin films of Indio acetate were used and N, N-dimetil tiourea as precursory compounds of In and S, respectively. Polycrystalline films were obtained from the compound In{sub 2}S{sub 3} using underlying temperatures, Ts, between 400 and 450 degrees Celsius, and Indio acetate solutions and N, N-dimetil tiourea with molar relations (In:S) of 1:8 and 1:1. The energy breach, Eg, of these films varies from 2.04 to 2.67 eV, and the value of the conductivity in the darkness, D varies from 10-7 to 1(cm)-1 in function of the molar relation in solution. It was found that the deposited films using a molar relation of In:S=1:8 are of intrinsic nature independently of Ts, while the ones deposited using a molar relations of In:S=1:1 and Ts 400 degrees Celsius posses type-n conductivity. Using the molar relation of I:S=1:1 and Ts=500 degrees Celsius the compound polycrystalline of In{sub 2}O{sub 3} is obtained whose optical and electrical properties are Eg {approx} 3 eV and D=11 (cm)-1, with electrical conductivity type-n. The deposited films using a molar relation of In:S=1:1 and Ts=450 degrees Celsius are the ones that keep the appropriate characteristics for their use as type-n material in photovoltaic structures (Eg=2eV and D=1?-1 com-1). [Spanish] En este trabajo de tesis se crecieron peliculas delgadas semiconductoras de los compuestos: In{sub 2}S{sub 3}, Ag{sub 2}S, Ag

Meson degrees of freedom in nuclei

International Nuclear Information System (INIS)

Delorme, J.

1982-01-01

A review is presented of the successes and shortcomings of the theory of meson degrees of freedom in nuclei with special emphasis on recent progress and on the necessity to bridge the gap with the degrees of freedom of QCD theory. (orig.)

Significance and radioimmunoassay of gastric inhibitory polypeptide

International Nuclear Information System (INIS)

Zheng Ping; Zeng Minde; Yuan Jimin

1995-01-01

We have established the GIP Radioimmunoassay which has high sensitivity and specificity by labelling with iodogen and purified with HPLC. Using this method, the plasma GIP level was measured in 64 cases of which there are 10 normal individuals, 25 cases of diabetes and 29 cases of liver cirrhosis . The results showed that the plasma GIP level was significantly increased in patients with liver cirrhosis and correlated to degree of glucose tolerance damage

On the Secrecy Degrees of Freedom with Full-Duplex Communication

DEFF Research Database (Denmark)

Mahmood, Nurul Huda; Mogensen, Preben Elgaard

2017-01-01

of such an application. The potential of full duplex nodes in improving the physical layer security of a communication link is investigated in this contribution. We specifically derive the information theoretic secrecy degrees of freedom measure for a pair of nodes communicating in full duplex mode. Moreover, closed...... and the delay reduction of full duplex communication are somewhat limited in realistic network settings, leading researchers to study other possible applications of full duplex communication which can provide significantly higher gains over half duplex communication. Physical layer security is an example...... form expressions for the instantaneous and ergodic throughput gain of full duplex communication over conventional half duplex is derived. The secrecy degrees of freedom with full duplex is shown to be two as opposed to that of zero in half duplex mode....

Astronomy Enrollments and Degrees: Results from the 2012 Survey of Astronomy Enrollments and Degrees. Focus On

Science.gov (United States)

Mulvey, Patrick; Nicholson, Starr

2014-01-01

Interest in astronomy degrees in the U.S. remains strong, with astronomy enrollments at or near all-time highs for the 2012-13 academic year. The total number of students taking an introductory astronomy course at a degree-granting physics or astronomy department is approaching 200,000. Enrollments in introductory astronomy courses have been…

New-generation curing units and short irradiation time: the degree of conversion of microhybrid composite resin.

Science.gov (United States)

Scotti, Nicolla; Venturello, Alberto; Migliaretti, Giuseppe; Pera, Francesco; Pasqualini, Damiano; Geobaldo, Francesco; Berutti, Elio

2011-09-01

This in vitro study investigated the depth of cure of a microhybrid composite resin when cured with reduced times of exposure to three commercially available curing lights. Different sample thicknesses (1, 2, and 3 mm) were light cured in high intensity polymerization mode (2,400 mW/cm² for 5, 10, 15, and 20 seconds; 1,100 mW/cm² for 10, 20, 30, and 40 seconds; and 1,100 mW/cm² for 10, 20, 30, and 40 seconds, respectively). The degree of conversion (%) at the bottom of each sample was measured by Attenuated Total Reflection Fourier Transform Infrared (ATR F-TIR) analysis after each polymerization step. Data were analyzed by ANOVA for repeated measures, showing the degree of conversion was not influenced by the curing light employed (P = .622) but was significantly influenced by the thickness of composite resin (P conversion vs the shorter irradiation time permitted (T1) were not significant among different lamps but were significant among different thicknesses. The depth of cure of microhybrid composite resin appears not to be influenced by the curing light employed. Increased irradiation time significantly increases the degree of conversion. Thickness strongly influences depth of cure.

Branding the bio/biomedical engineering degree.

Science.gov (United States)

Voigt, Herbert F

2011-01-01

The future challenges to medical and biological engineering, sometimes referred to as biomedical engineering or simply bioengineering, are many. Some of these are identifiable now and others will emerge from time to time as new technologies are introduced and harnessed. There is a fundamental issue regarding "Branding the bio/biomedical engineering degree" that requires a common understanding of what is meant by a B.S. degree in Biomedical Engineering, Bioengineering, or Biological Engineering. In this paper we address some of the issues involved in branding the Bio/Biomedical Engineering degree, with the aim of clarifying the Bio/Biomedical Engineering brand.

An intercalated BSc degree is associated with higher marks in subsequent medical school examinations

Directory of Open Access Journals (Sweden)

Sinclair Hazel

2009-05-01

Full Text Available Abstract Background To compare medical students on a modern MBChB programme who did an optional intercalated degree with their peers who did not intercalate; in particular, to monitor performance in subsequent undergraduate degree exams. Methods This was a retrospective, observational study of anonymised databases of medical student assessment outcomes. Data were accessed for graduates, University of Aberdeen Medical School, Scotland, UK, from the years 2003 to 2007 (n = 861. The main outcome measure was marks for summative degree assessments taken after intercalating. Results Of 861 medical students, 154 (17.9% students did an intercalated degree. After adjustment for cohort, maturity, gender and baseline (3rd year performance in matching exam type, having done an IC degree was significantly associated with attaining high (18–20 common assessment scale (CAS marks in three of the six degree assessments occurring after the IC students rejoined the course: the 4th year written exam (p th year OSCE (p = 0.001 and the 5th year Elective project (p = 0.010. Conclusion Intercalating was associated with improved performance in Years 4 and 5 of the MBChB. This improved performance will further contribute to higher academic ranking for Foundation Year posts. Long-term follow-up is required to identify if doing an optional intercalated degree as part of a modern medical degree is associated with following a career in academic medicine.

Experimental design for HTGR fuel rods

International Nuclear Information System (INIS)

Bayne, C.K.

1975-01-01

Fuel rods for the high temperature gas cooled reactor are composed of pyrolytic carbon coated fuel particles bounded by a carbonaceous matrix. Because of differential shrinkage between coated particles and the carbonaceous matrix, breakage of the pyrolytic coating has been observed with certain combinations of coated particles and matrix compositions. The pyrolytic coating is intended to be the primary containment for fission products. Therefore, an experiment is desired to determine the breakage characteristics of different strength coated particles combined with different matrix compositions during irradiation

Emotional intelligence in non-psychotic first-degree relatives of people with schizophrenia.

Science.gov (United States)

Albacete, Auria; Bosque, Clara; Custal, Nuria; Crespo, José M; Gilabert, Ester; Albiach, Angela; Menchón, José M; Contreras, Fernando

2016-08-01

Subtle social cognitive deficits in unaffected relatives of schizophrenia patients have received increasing attention over the last few years, supporting their potential endophenotypic role for this disorder. The current study assessed non-psychotic first-degree relatives' performance on a multidimensional measure of emotional intelligence (EI): the Mayer-Salovey-Caruso Emotional Intelligence Test 2.0 (MSCEIT). Endorsed by the National Institute of Mental Health, the MSCEIT is a valid and reliable instrument for detecting emotion-processing deficits among schizophrenia patients and people high in schizotypy. Thirty-seven first-degree relatives, 37 schizophrenia outpatients and 37 healthy controls completed the MSCEIT, which comprises eight subscales aimed to assess the four branches of EI: Identifying, Facilitating, Understanding and Managing Emotions. Potential associations with cognitive function and schizotypy levels, measured with the Schizotypal Personality Questionnaire-Brief, were further evaluated. Relatives had significantly lower MSCEIT total scores than controls and also significantly lower scores on the Identifying emotions branch. Nevertheless, schizophrenia patients still had the poorest global EI performance. The strongest positive correlations were found in relatives and controls with measures of executive function, processing speed and general intelligence. A higher level of schizotypy correlated significantly with lower MSCEIT scores among controls, but not among relatives. Contrary to expectations in the general population, the current study observed subtle EI impairment in non-psychotic first-degree relatives of schizophrenia patients. These findings support the hypothesis that these EI deficiencies may be potential endophenotypes located between the clinical phenotype and the genetic predisposition for schizophrenia. Copyright © 2016 Elsevier B.V. All rights reserved.

Identification of vulnerability among first-degree relatives of patients with schizophrenia.

Science.gov (United States)

Solanki, R K; Swami, M K; Singh, P; Gupta, S

2012-09-01

To evaluate the status of schizotypy, neurological soft signs, and cognitive functions as vulnerability markers for schizophrenia and to investigate the potential value of their combination for early identification of people at high risk for schizophrenia. A cross-sectional study was conducted. Subjects were drawn from first-degree relatives of inpatients and outpatients with schizophrenia (n = 50). Controls (n = 30) were recruited by word-of-mouth from hospital staff and attendants of hospitalised patients. Subjects who met inclusion criteria on screening were subjected to selected measures for assessment, including Schizotypal Personality Questionnaire-Brief Version, the Cambridge Neurological Inventory, digit span test, paired associate learning test, and visuospatial working memory matrix. Statistical analysis was completed using the independent t test and significance (p value), as well as calculation of effect size (Cohen's d). Discriminant function analysis was used to determine the effect of combining assessment measures. First-degree relatives showed higher schizotypy scores (Cohen's d = 0.88) and neurological soft signs (Cohen's d = 1.55). They scored significantly worse on all neurocognitive measures (Cohen's d = -1.27). Discriminant function analysis showed that Schizotypal Personality Questionnaire-Brief Version, neurological soft signs, and total cognitive index (the sum of weighted scores on individual cognitive scales) in combination better discriminated between the first-degree relative and control groups (Wilks' λ = 0.54). Use of multiple vulnerability markers could enhance the specificity of measures used to determine risk for schizophrenia.

Impact of the degree of cooking on starch digestibility of rice - An in vitro study.

Science.gov (United States)

Tamura, Masatsugu; Singh, Jaspreet; Kaur, Lovedeep; Ogawa, Yukiharu

2016-01-15

The impact of cooking degree on the starch digestibility of a non-waxy, cooked rice was examined through a simulated gastro-small intestinal in vitro digestion model. The starch hydrolysis of both non-homogenised and homogenised cooked rice samples during simulated digestion was also compared in order to examine the impact of grain structure on starch digestibility. Polished rice grains were cooked in boiling water for 10min (partially cooked) and 20min (fully cooked) to obtain samples of different cooking degree. No significant differences in the equilibrium starch hydrolysis (%) were observed among the partially and fully cooked grains, although significant differences were observed among the uncooked and cooked samples. The equilibrium starch hydrolysis (%) of homogenised rice was higher than its non-homogenised counterpart. These results showed that rice starch digestibility should not be affected by the cooking degrees related to starch gelatinisation, but was influenced by the modification/destruction of the grain structure during mechanical processing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mechanical aspects of degree of cement bonding and implant wedge effect.

Science.gov (United States)

Yoon, Yong-San; Oxland, Thomas R; Hodgson, Antony J; Duncan, Clive P; Masri, Bassam A; Choi, Donok

2008-11-01

The degree of bonding between the femoral stem and cement in total hip replacement remains controversial. Our objective was to determine the wedge effect by debonding and stem taper angle on the structural behavior of axisymmetric stem-cement-bone cylinder models. Stainless steel tapered plugs with a rough (i.e. bonded) or smooth (i.e. debonded) surface finish were used to emulate the femoral stem. Three different stem taper angles (5 degrees , 7.5 degrees , 10 degrees ) were used for the debonded constructs. Non-tapered and tapered (7.5 degrees ) aluminum cylindrical shells were used to emulate the diaphyseal and metaphyseal segments of the femur. The cement-aluminum cylinder interface was designed to have a shear strength that simulated bone-cement interfaces ( approximately 8MPa). The test involved applying axial compression at a rate of 0.02mm/s until failure. Six specimens were tested for each combination of the variables. Finite element analysis was used to enhance the understanding of the wedge effect. The debonded stems sustained about twice as much load as the bonded stem, regardless of taper angle. The metaphyseal model carried 35-50% greater loads than the diaphyseal models and the stem taper produced significant differences. Based on the finite element analysis, failure was most probably by shear at the cement-bone interface. Our results in this simplified model suggest that smooth (i.e. debonded) stems have greater failure loads and will incur less slippage or shear failure at the cement-bone interface than rough (i.e. bonded) stems.

Data on ground-water quality for the Lovelock 1 degree by 2 degree quadrangle, western Nevada

Science.gov (United States)

Welch, Alan H.; Williams, Rhea P.

1987-01-01

Water quality data for groundwater has been compiled for the Lovelock 1 degree x 2 degree quadrangle which covers a portion of western Nevada. Chemical characteristics of the water are shown on a map (at a scale of 1:250,000) and on trilinear diagrams for the major ions. The data for the area are also presented in a table. (USGS)

The d*(2380) in Neutron Stars - A New Degree of Freedom?

Science.gov (United States)

Vidaña, I.; Bashkanov, M.; Watts, D. P.; Pastore, A.

2018-06-01

Elucidating the appropriate microscopic degrees of freedom within neutron stars remains an open question which impacts nuclear physics, particle physics and astrophysics. The recent discovery of the first non-trivial dibaryon, the d* (2380), provides a new candidate for an exotic degree of freedom in the nuclear equation of state at high matter densities. In this paper a first calculation of the role of the d* (2380) in neutron stars is performed based on a relativistic mean field description of the nucleonic degrees of freedom supplemented by a free boson gas of d* (2380). The calculations indicate that the d* (2380) would appear at densities around three times normal nuclear matter saturation density and comprise around 20% of the matter in the centre of heavy stars with higher fractions possible in the higher densities of merger processes. The d* (2380) would also reduce the maximum star mass by around 15% and have significant influence on the fractional proton/neutron composition. New possibilities for neutron star cooling mechanisms arising from the d* (2380) are also predicted.

Identifying and Analyzing Strong Components of an Industrial Network Based on Cycle Degree

Directory of Open Access Journals (Sweden)

Zhiying Zhang

2016-01-01

Full Text Available In the era of big data and cloud computing, data research focuses not only on describing the individual characteristics but also on depicting the relationships among individuals. Studying dependence and constraint relationships among industries has aroused significant interest in the academic field. From the network perspective, this paper tries to analyze industrial relational structures based on cycle degree. The cycle degree of a vertex, that is, the number of cycles through a vertex in an industrial network, can describe the roles of the vertices of strong components in industrial circulation. In most cases, different vertices in a strong component have different cycle degrees, and the one with a larger cycle degree plays more important roles. However, the concept of cycle degree does not involve the lengths of the cycles, which are also important for circulations. The more indirect the relationship between two industries is, the weaker it is. In order to analyze strong components thoroughly, this paper proposes the concept of circular centrality taking into consideration the influence by two factors: the lengths and the numbers of cycles through a vertex. Exemplification indicates that a profound analysis of strong components in an industrial network can reveal the features of an economy.

Antisaccade performance in schizophrenia patients, their first-degree biological relatives, and community comparison subjects: data from the COGS study.

Science.gov (United States)

Radant, Allen D; Dobie, Dorcas J; Calkins, Monica E; Olincy, Ann; Braff, David L; Cadenhead, Kristin S; Freedman, Robert; Green, Michael F; Greenwood, Tiffany A; Gur, Raquel E; Gur, Ruben C; Light, Gregory A; Meichle, Sean P; Millard, Steve P; Mintz, Jim; Nuechterlein, Keith H; Schork, Nicholas J; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Stone, William S; Swerdlow, Neal R; Tsuang, Ming T; Turetsky, Bruce I; Tsuang, Debby W

2010-09-01

The antisaccade task is a widely used technique to measure failure of inhibition, an important cause of cognitive and clinical abnormalities found in schizophrenia. Although antisaccade performance, which reflects the ability to inhibit prepotent responses, is a putative schizophrenia endophenotype, researchers have not consistently reported the expected differences between first-degree relatives and comparison groups. Schizophrenia participants (n=219) from the large Consortium on the Genetics of Schizophrenia (COGS) sample (n=1078) demonstrated significant deficits on an overlap version of the antisaccade task compared to their first-degree relatives (n=443) and community comparison subjects (CCS; n=416). Although mean antisaccade performance of first-degree relatives was intermediate between schizophrenia participants and CCS, a linear mixed-effects model adjusting for group, site, age, and gender found no significant performance differences between the first-degree relatives and CCS. However, admixture analyses showed that two components best explained the distributions in all three groups, suggesting two distinct doses of an etiological factor. Given the significant heritability of antisaccade performance, the effects of a genetic polymorphism is one possible explanation of our results.

Strategies for Pursuing a Master's Degree.

Science.gov (United States)

Thomas, Cynthia M; McIntosh, Constance E; Mensik, Jennifer S

2016-01-01

Health care has become very complex and is in a constant state of change. As a result of the evolving change and increasing complexity, a more educated nursing workforce is needed (Dracup K. Master's nursing programs. American Association of Colleges of Nursing. 2015; Institute of Medicine. The Future of Nursing: Leading Change, Advancing Health. 2010). It is now becoming necessary for registered nurses to earn an advanced degree to work at the highest level of their practice authority (Dracup K. Master's nursing programs. American Association of Colleges of Nursing. 2015; Institute of Medicine. The Future of Nursing: Leading Change, Advancing Health. 2010.). Preparing to reenter college may be an overwhelming prospect for some registered nurses seeking an advanced degree. However, there are some simple strategies that may help sort out the many degree options, financial obligations, decisions about brick and mortar versus online learning, commitment to degree completion, and changing career paths. This article will provide the registered nurse valuable information that will assist in the exciting process of returning to college.

The degree of irreversibility in deterministic finite automata

DEFF Research Database (Denmark)

Axelsen, Holger Bock; Holzer, Markus; Kutrib, Martin

2016-01-01

the language, and show that the degree induces a strict infinite hierarchy of languages. We examine how the degree of irreversibility behaves under the usual language operations union, intersection, complement, concatenation, and Kleene star, showing tight bounds (some asymptotically) on the degree....

Time to Degree: A National View of the Time Enrolled and Elapsed for Associate and Bachelor's Degree Earners. (Signature Report No. 11)

Science.gov (United States)

Shapiro, Doug; Dundar, Afet; Wakhungu, Phoebe Khasiala; Yuan, Xin; Nathan, Angel; Hwang, Youngsik

2016-01-01

This report examines time to degree completion for a cohort of students who earned an associate degree as their first and only postsecondary degree or a bachelor's degree as their first four-year degree between July 1, 2014, and June 30, 2015. Overall, the average time enrolled for associate and bachelor's degree earners was 3.3 years and 5.1…

The New Sphere of International Student Education in Chinese Higher Education: A Focus on English-Medium Degree Programs

Science.gov (United States)

Kuroda, Chiharu

2014-01-01

This empirical study explores the current features of English-medium instructed master's degree programs for international students (EMIMDPs-ISs) in Chinese higher education. Since the mid-2000s, a significant number of Chinese universities have proactively engaged in establishing English-medium instructed degree programs for international…

Astronautics Degrees for Space Industry

Science.gov (United States)

Gruntman, M.; Brodsky, R.; Erwin, D.; Kunc, J.

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science degree program in Astronautics combines basic science and engineering classes with specialized astronautics classes. The Master of Science degree program in Astronautics offers classes in various areas of space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers. The new world of distance learning presents new challenges and opens new opportunities. We show how the transformation of distance learning and particularly the introduction of webcasting transform organization of the program and class delivery. We will describe in detail the academic focus of the program, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

How Much Does It Cost Institutions to Produce Stem Degrees? Data Brief. The Price and Cost of Science Degrees Series

Science.gov (United States)

Delta Cost Project at American Institutes for Research, 2013

2013-01-01

This AIR Data Brief breaks down the "cost per degree" estimates for 28 disciplines, including those in the STEM fields, which among the most expensive degrees to produce. The brief points to ways colleges can change their tuition structure to finance STEM degrees more affordably. This data brief is the fourth of four in the series. (See…

Fracturing process and effect of fracturing degree on wave velocity of a crystalline rock

Directory of Open Access Journals (Sweden)

Charalampos Saroglou

2017-10-01

Full Text Available The present paper investigates the effect of fracturing degree on P- and S-wave velocities in rock. The deformation of intact brittle rocks under loading conditions is characterized by a microcracking procedure, which occurs due to flaws in their microscopic structure and propagates through the intact rock, leading to shear fracture. This fracturing process is of fundamental significance as it affects the mechanical properties of the rock and hence the wave velocities. In order to determine the fracture mechanism and the effect of fracturing degree, samples were loaded at certain percentages of peak strength and ultrasonic wave velocity was recorded after every test. The fracturing degree was recorded on the outer surface of the sample and quantified by the use of the indices P10 (traces of joints/m, P20 (traces of joints/m2 and P21 (length of fractures/m2. It was concluded that the wave velocity decreases exponentially with increasing fracturing degree. Additionally, the fracturing degree is described adequately with the proposed indices. Finally, other parameters concerning the fracture characteristics, rock type and scale influence were found to contribute to the velocity decay and need to be investigated further.

Characteristics of regents college nontraditional nuclear technology degrees

International Nuclear Information System (INIS)

DeSain, G.W.

1989-01-01

In 1971, the Board of Regents of The University of The State of New York created Regents College Degrees to assess academic knowledge of working adults and award college degrees based on demonstrated knowledge rather than time spent in a college classroom. It was founded on a basic premise that seemed radical to some but which is now widely accepted: What a person knows is more important than how or where that knowledge was acquired. Regents College degrees, therefore, are a different concept of a college: one that is an assessing institution rather than a teaching institution. It has no campus and offers no courses. Students can combine college credits from a variety of different sources int an accredited degree program. Staff and faculty evaluate that credit according to the requirements of the particular degree program. When all requirements are met, the Board or Regents of The University of The State of New York confers the degree

A high resolution electron microscopy investigation of curvature in multilayer graphite sheets

International Nuclear Information System (INIS)

Wang Zhenxia; Hu Jun; Wang Wenmin; Yu Guoqing

1998-01-01

Here the authors report a carbon sample generated by ultrasonic wave high oriented pyrolytic graphite (HOPG) in ethanol, water or ethanol-water mixed solution. High resolution transmission electron microscopy (HRTEM) revealed many multilayer graphite sheets with a total curved angle that is multiples of θ 0 (= 30 degree C). Close examination of the micrographs showed that the curvature is accomplished by bending the lattice planes. A possible explanation for the curvature in multilayer graphite sheets is discussed based on the conformation of graphite symmetry axes and the formation of sp 3 -like line defects in the sp 2 graphitic network

Nuclear Engineering Enrollments and Degrees Survey, 2005 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2006-01-01

This annual report details the number of nuclear engineering bachelor's, master's, and doctoral degrees awarded at a sampling of academic programs from 1998-2005. it also looks at nuclear engineering degrees by curriculum and the number of students enrolled in nuclear engineering degree programs at 30 U.S. universities in 2005

Scholarship in nursing: Degree-prepared nurses versus diploma ...

African Journals Online (AJOL)

All but one (n = 18) nursing educators who obtained a degree as first qualification are educators in the private sector that include both universities as well as nursing colleges of private hospital groups. Data further revealed that most nurse educators and those in managerial positions were degree prepared. More degree ...

Degree-regular triangulations of torus and Klein bottle

Indian Academy of Sciences (India)

Home; Journals; Proceedings – Mathematical Sciences; Volume 115; Issue 3 ... A triangulation of a connected closed surface is called degree-regular if each of its vertices have the same degree. ... In [5], Datta and Nilakantan have classified all the degree-regular triangulations of closed surfaces on at most 11 vertices.

Health Physics Enrollments and Degrees Survey, 2005 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2006-01-01

This annual report details the number of health physics bachelor's, master's, and postdoctoral degrees awarded at a sampling of academic programs from 1998-2005. It also looks at health physics degrees by curriculum and the number of students enrolled in health physics degree programs at 30 U.S. universities in 2005

Health Physics Enrollments and Degrees Survey, 2004 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2005-01-01

This annual report details the number of health physics bachelor's, master's, and doctoral degrees awarded at a sampling of academic programs from 1998-2004. It also looks at health physics degrees by curriculum and the number of students enrolled in health physics degree programs at 28 U.S. universities in 2004

The effect of curing units and methods on degree of conversion of two types of composite resins

Directory of Open Access Journals (Sweden)

Hasani Tabatabaei M

2007-06-01

Full Text Available Background and Aim: Halogen lamp is the commonly used light source for composite photo polymerization. Recently, high power halogen lamps, LED and plasma arc are introduced for improving the polymerization. The aim of this study was to investigate the effect of conventional and high power halogen lamps and LED light curing unit on degree of conversion of two different composite resins.Materials and Methods: In this in vitro experimental study two halogen units (Coltolux 50 with the intensity of  330 mW/cm2 and Optilux 501 with two different operating modes of standard with the intensity of 820 mW/cm2 and Ramp with the intentsiy of 100-1030mW/cm2 and one LED light curing unit (620 mW/cm2 were used. The composites were hybrid (Tetric ceram and nanofilled (Filteke supreme. Each materials/curing method contained three samples and degree of conversion (DC was measured with FTIR. Data were analyzed statistically with one way and two way ANOVA, Tukey HSD. P<0.05 was considered as the limit of significance.Results: Tetric ceram revealed higher DCthan Supreme. Tetric ceram showed a significant decrease in DC when Coltolux 50 was used in comparison to LED and Optilux 501. The latters did not show significant effect on DC of this material. DC of Supreme polymerized with various curing modes was not significantly different.Conclusion: Based on the results of this study, degree of conversion in hybrid composites was higher than nanofilled. In comparison with conventional halogen lamp (Coltolux 50, high intensity halogen lamps and LED unit significantly lead to higher degree of conversion in hybrid composites.

Risk of leukemia in first degree relatives of patients with nonsyndromic cleft lip and palate

Directory of Open Access Journals (Sweden)

Eduardo GONÇALVES

2014-01-01

Full Text Available The aim of this study was to determine the frequency of leukemia in parents of patients with nonsyndromic cleft lip and/or cleft palate (NSCL/P. This case-control study evaluated first-degree family members of 358 patients with NSCL/P and 1,432 subjects without craniofacial alterations or syndromes. Statistical analysis was carried out using Fisher’s test. From the 358 subjects with NSCL/P, 3 first-degree parents had history of leukemia, while 2 out of 1,432 subjects from the unaffected group had a family history of leukemia. The frequency of positive family history of leukemia was not significantly increased in first-degree relatives of patients with NSCL/P.

A 70th Degree Lunar Gravity Model (GLGM-2) from Clementine and other tracking data

Science.gov (United States)

Lemonie, Frank G. R.; Smith, David E.; Zuber, Maria T.; Neumann, Gregory A.

1997-01-01

A spherical harmonic model of the lunar gravity field complete to degree and order 70 has been developed from S band Doppler tracking data from the Clementine mission, as well as historical tracking data from Lunar Orbiters 1-5 and the Apollo 15 and 16 subsatellites. The model combines 361,000 Doppler observations from Clementine with 347,000 historical observations. The historical data consist of mostly 60-s Doppler with a noise of 0.25 to several mm/s. The Clementine data consist of mostly 10-s Doppler data, with a data noise of 0.25 mm/s for the observations from the Deep Space Network, and 2.5 mm/s for the data from a naval tracking station at Pomonkey, Maryland. Observations provided Clementine, provide the strongest satellite constraint on the Moon's low-degree field. In contrast the historical data, collected by spacecraft that had lower periapsis altitudes, provide distributed regions of high-resolution coverage within +/- 29 deg of the nearside lunar equator. To obtain the solution for a high-degree field in the absence of a uniform distribution of observations, we applied an a priori power law constraint of the form 15 x 10(exp -5)/sq l which had the effect of limiting the gravitational power and noise at short wavelengths. Coefficients through degree and order 18 are not significantly affected by the constraint, and so the model permits geophysical analysis of effects of the major basins at degrees 10-12. The GLGM-2 model confirms major features of the lunar gravity field shown in previous gravitational field models but also reveals significantly more detail, particularly at intermediate wavelengths (10(exp 3) km). Free-air gravity anomaly maps derived from the new model show the nearside and farside highlands to be gravitationally smooth, reflecting a state of isostatic compensation. Mascon basins (including Imbrium, Serenitatis, Crisium, Smythii, and Humorum) are denoted by gravity highs first recognized from Lunar Orbiter tracking. All of the major

Ankle mechanics during sidestep cutting implicates need for 2-degrees of freedom powered ankle-foot prostheses.

Science.gov (United States)

Ficanha, Evandro M; Rastgaar, Mohammad; Kaufman, Kenton R

2015-01-01

The ankle joint of currently available powered prostheses is capable of controlling one degree of freedom (DOF), focusing on improved mobility in the sagittal plane. To increase agility, the requirements of turning in prosthesis design need to be considered. Ankle kinematics and kinetics were studied during sidestep cutting and straight walking. There were no significant differences between the ankle sagittal plane mechanics when comparing sidestep cutting and straight walking; however, significant differences were observed in ankle frontal plane mechanics. During straight walking, the inversion-eversion (IE) angles were smaller than with sidestep cutting. The ankle that initiated the sidestep cutting showed progressively increasing inversion from 2 to 13 degrees while the following contralateral step showed progressively decreasing inversion from 8 to -4 degrees during normal walking speed. The changes in IE kinematics were the most significant during sidestep cutting compared with straight walking. The IE moments of the step that initiated the sidestep cutting were always in eversion, acting as a braking moment opposing the inverting motion. This suggests that an ankle-foot prosthesis with active DOFs in the sagittal and frontal planes will increase the agility of gait for patients with limb loss.

Biotite dissolution and oxygen consumption in aqueous media at 100 degrees C

International Nuclear Information System (INIS)

Taylor, P.; Owen, D.G.

1997-04-01

The ability of biotite to consume dissolved oxygen, and hence restore reducing conditions in a nuclear fuel waste vault after closure, has been assessed experimentally. Oxygen consumption has been measured directly, and also deduced from experimental biotite dissolution rates. Results from the dissolution experiments on granitic biotite from the Lac du Bonnet region, Manitoba indicate that the biotite component of granite backfill should consume entrained oxygen in about 50 years at 100 degrees C. Direct measurements of oxygen consumption by commercial biotite specimens originating from Bancroft, Ontario were reasonably consistent with this finding. Magnetite is significantly more effective than biotite at oxygen consumption, perhaps two orders of magnitude faster at 100 degrees C. (author)

Classification of different degrees of adiposity in sedentary rats

Energy Technology Data Exchange (ETDEWEB)

Leopoldo, A.S.; Lima-Leopoldo, A.P. [Departamento de Desportos, Centro de Educação Física e Esportes, Universidade Federal do Espírito Santo, Vitória, ES (Brazil); Nascimento, A.F.; Luvizotto, R.A.M.; Sugizaki, M.M. [Instituto de Ciências da Saúde, Universidade Federal do Mato Grosso, Sinop, MT (Brazil); Campos, D.H.S.; Silva, D.C.T. da [Departamento de Clínica Médica, Faculdade de Medicina, Universidade Estadual Paulista, Botucatu, SP (Brazil); Padovani, C.R. [Departamento de Bioestatística, Instituto de Biociências, Universidade Estadual Paulista, Botucatu, SP (Brazil); Cicogna, A.C. [Departamento de Clínica Médica, Faculdade de Medicina, Universidade Estadual Paulista, Botucatu, SP (Brazil)

2016-02-23

In experimental studies, several parameters, such as body weight, body mass index, adiposity index, and dual-energy X-ray absorptiometry, have commonly been used to demonstrate increased adiposity and investigate the mechanisms underlying obesity and sedentary lifestyles. However, these investigations have not classified the degree of adiposity nor defined adiposity categories for rats, such as normal, overweight, and obese. The aim of the study was to characterize the degree of adiposity in rats fed a high-fat diet using cluster analysis and to create adiposity intervals in an experimental model of obesity. Thirty-day-old male Wistar rats were fed a normal (n=41) or a high-fat (n=43) diet for 15 weeks. Obesity was defined based on the adiposity index; and the degree of adiposity was evaluated using cluster analysis. Cluster analysis allowed the rats to be classified into two groups (overweight and obese). The obese group displayed significantly higher total body fat and a higher adiposity index compared with those of the overweight group. No differences in systolic blood pressure or nonesterified fatty acid, glucose, total cholesterol, or triglyceride levels were observed between the obese and overweight groups. The adiposity index of the obese group was positively correlated with final body weight, total body fat, and leptin levels. Despite the classification of sedentary rats into overweight and obese groups, it was not possible to identify differences in the comorbidities between the two groups.

Classification of different degrees of adiposity in sedentary rats

International Nuclear Information System (INIS)

Leopoldo, A.S.; Lima-Leopoldo, A.P.; Nascimento, A.F.; Luvizotto, R.A.M.; Sugizaki, M.M.; Campos, D.H.S.; Silva, D.C.T. da; Padovani, C.R.; Cicogna, A.C.

2016-01-01

In experimental studies, several parameters, such as body weight, body mass index, adiposity index, and dual-energy X-ray absorptiometry, have commonly been used to demonstrate increased adiposity and investigate the mechanisms underlying obesity and sedentary lifestyles. However, these investigations have not classified the degree of adiposity nor defined adiposity categories for rats, such as normal, overweight, and obese. The aim of the study was to characterize the degree of adiposity in rats fed a high-fat diet using cluster analysis and to create adiposity intervals in an experimental model of obesity. Thirty-day-old male Wistar rats were fed a normal (n=41) or a high-fat (n=43) diet for 15 weeks. Obesity was defined based on the adiposity index; and the degree of adiposity was evaluated using cluster analysis. Cluster analysis allowed the rats to be classified into two groups (overweight and obese). The obese group displayed significantly higher total body fat and a higher adiposity index compared with those of the overweight group. No differences in systolic blood pressure or nonesterified fatty acid, glucose, total cholesterol, or triglyceride levels were observed between the obese and overweight groups. The adiposity index of the obese group was positively correlated with final body weight, total body fat, and leptin levels. Despite the classification of sedentary rats into overweight and obese groups, it was not possible to identify differences in the comorbidities between the two groups

High-Degree Neurons Feed Cortical Computations.

Directory of Open Access Journals (Sweden)

Nicholas M Timme

2016-05-01

Full Text Available Recent work has shown that functional connectivity among cortical neurons is highly varied, with a small percentage of neurons having many more connections than others. Also, recent theoretical developments now make it possible to quantify how neurons modify information from the connections they receive. Therefore, it is now possible to investigate how information modification, or computation, depends on the number of connections a neuron receives (in-degree or sends out (out-degree. To do this, we recorded the simultaneous spiking activity of hundreds of neurons in cortico-hippocampal slice cultures using a high-density 512-electrode array. This preparation and recording method combination produced large numbers of neurons recorded at temporal and spatial resolutions that are not currently available in any in vivo recording system. We utilized transfer entropy (a well-established method for detecting linear and nonlinear interactions in time series and the partial information decomposition (a powerful, recently developed tool for dissecting multivariate information processing into distinct parts to quantify computation between neurons where information flows converged. We found that computations did not occur equally in all neurons throughout the networks. Surprisingly, neurons that computed large amounts of information tended to receive connections from high out-degree neurons. However, the in-degree of a neuron was not related to the amount of information it computed. To gain insight into these findings, we developed a simple feedforward network model. We found that a degree-modified Hebbian wiring rule best reproduced the pattern of computation and degree correlation results seen in the real data. Interestingly, this rule also maximized signal propagation in the presence of network-wide correlations, suggesting a mechanism by which cortex could deal with common random background input. These are the first results to show that the extent to

Astronomy Enrollments and Degrees: Results from the 2009 & 2010 Surveys of Physics & Astronomy Enrollments and Degrees. Focus On

Science.gov (United States)

Nicholson, Starr; Mulvey, Patrick

2011-01-01

The Statistical Research Center of the American Institute of Physics conducts an annual census from October through February of all departments that offer degrees in astronomy (78) in the United States. Astronomy departments consist of stand-alone degree-granting departments (39) and departments that are administered along with a physics program…

High degree of genetic differentiation in marine three-spined sticklebacks (Gasterosteus aculeatus).

Science.gov (United States)

Defaveri, Jacquelin; Shikano, Takahito; Shimada, Yukinori; Merilä, Juha

2013-09-01

Populations of widespread marine organisms are typically characterized by a low degree of genetic differentiation in neutral genetic markers, but much less is known about differentiation in genes whose functional roles are associated with specific selection regimes. To uncover possible adaptive population divergence and heterogeneous genomic differentiation in marine three-spined sticklebacks (Gasterosteus aculeatus), we used a candidate gene-based genome-scan approach to analyse variability in 138 microsatellite loci located within/close to (<6 kb) functionally important genes in samples collected from ten geographic locations. The degree of genetic differentiation in markers classified as neutral or under balancing selection-as determined with several outlier detection methods-was low (F(ST) = 0.033 or 0.011, respectively), whereas average FST for directionally selected markers was significantly higher (F(ST) = 0.097). Clustering analyses provided support for genomic and geographic heterogeneity in selection: six genetic clusters were identified based on allele frequency differences in the directionally selected loci, whereas four were identified with the neutral loci. Allelic variation in several loci exhibited significant associations with environmental variables, supporting the conjecture that temperature and salinity, but not optic conditions, are important drivers of adaptive divergence among populations. In general, these results suggest that in spite of the high degree of physical connectivity and gene flow as inferred from neutral marker genes, marine stickleback populations are strongly genetically structured in loci associated with functionally relevant genes. © 2013 John Wiley & Sons Ltd.

Liquid fuels from Canadian peat by the Waterloo fast pyrolysis process

Energy Technology Data Exchange (ETDEWEB)

Piskorz, J.; Majerski, P.; Scott, D.S. (Univ. of Waterloo, ON (Canada))

1990-06-01

Two Quebec peats were pyrolyzed in the Waterloo fast pyrolysis process with the objective of maximizing liquid yields. A young sphagnum peat gave maximum organic liquid yields of 45-47% in an optimum range of 450-550{degree}C and 1 atm pressure. Char yields varied from 35% to 26% and gas yields from 12% to 17% over the range. The character of the liquid product changed significantly over the optimum temperature range, with the ratio of water soluble to water insoluble components decreasing from 2.3 to 0.6 as temperature increased, with an accompanying decrease in oxygen content. Pyrolytic oil yields from an old black peat gave similar results, although with somewhat lower yields of organic liquids. Char yield was somewhat higher (33%) at optimum conditions, but gas yield was nearly identical. Upgrading tests of the peat oil obtained a yield of ca 33% of the liquid feed as a gasoline-like liquid under hydrodeoxygenation conditions. 7 refs., 11 figs., 6 tabs.

Chemical-Structural Changes of Organic Matter in a Semi-Arid Soil After Organic Amendment

Institute of Scientific and Technical Information of China (English)

C.NICOL(A)S; G.MASCIANDARO; T.HERN(A)NDEZ; C.GARCIA

2012-01-01

A 9-month incubation experiment using composted and non-composted amendments derived from vine pruning waste and sewage sludge was carried out to study the effects of the nature and stability of organic amendments on the structural composition of organic matter (OM) in a semi-arid soil. The changes of soil OM,both in the whole soil and in the extractable carbon with pyrophosphate,were evaluated by pyrolysis-gas chromatography and chemical analyses.By the end of the experiment,the soils amended with pruning waste exhibited less organic carbon loss than those receiving sewage sludge.The non-composted residues increased the aliphatic-pyrolytic products of the OM,both in the whole soil and also in the pyrophosphate extract,with the products derived from peptides and proteins being significantly higher.After 9 months,in the soils amended with pruning waste the relative abundance of phenolic-pyrolytic products derived from phenolic compounds,lignin and proteins in the whole soil tended to increase more than those in the soils amended with sewage sludge.However,the extractable OM with pyrophosphate in the soils amended with composted residues tended to have higher contents of these phenolic-pyrolytic products than that in non-composted ones.Thus,despite the stability of pruning waste,the composting of this material promoted the incorporation of phenolic compounds to the soil OM.The pyrolytic indices (furfural/pyrrole and aliphatic/aromatic ratios) showed the diminution of aliphatic compounds and the increase of aromatic compounds,indicating the stabilization of the OM in the amended soils after 9 months.In conclusion,the changes of soil OM depend on the nature and stability of the organic amendments,with composted vine pruning waste favouring humification.

A degree in bioethics: an "introspective" analysis from Pakistan.

Science.gov (United States)

Jafarey, Aamir M

2014-04-01

The success of degree-level bioethics programmes, a recent development across the world, is generally evaluated on the basis of their quantifiable impact; for instance, the number of publications graduates produce. The author conducted a study of Pakistani graduates who had pursued a higher qualification in bioethics, and on the basis of the respondents' written and verbal narratives, this paper presents an analysis of their perceptions of the internal impact of bioethics degree programmes. Using these narratives, the paper also analyses the reactions of their colleagues to their new qualification.The respondents reported significant changes in their thinking and actions following their education in bioethics. They exhibited more empathy towards their patients and research subjects, and became better "listeners~ They also reported changes in practices,the most significant being the discontinuation of the linkages they had established with pharmaceutical firms to seek support,because of concerns related to conflict of interest. Although some respondents believed that their new qualification was generally welcomed by their colleagues, who considered them aesthetics resources, others reported that their colleagues harboured unreasonable and impractical expectations from them, and that these were impossible to fulfil. They also got the feeling of being ostracized and regarded as "ethics watchdogs~ Whereas the internalisation of bioethics is an encouraging finding in this cohort, the mixed reception that bioethics and those involved in it received indicates a Jack of understanding of the field and is a source of concern.

Glucose intolerance, insulin resistance and cardiovascular risk factors in first degree relatives of women with polycystic ovary syndrome.

Science.gov (United States)

Yilmaz, Murat; Bukan, Neslihan; Ersoy, Reyhan; Karakoç, Ayhan; Yetkin, Ilhan; Ayvaz, Göksun; Cakir, Nuri; Arslan, Metin

2005-09-01

The aim of the present study was to evaluate insulin resistance (IR), glucose tolerance status and cardiovascular risk factors in first degree relatives of patients with polycystic ovary syndrome (PCOS). A total of 120 family members [Mothers(PCOS) (n = 40), Fathers(PCOS) (n = 38), Sisters(PCOS) (n = 25) and Brothers(PCOS) (n = 17)] of 55 patients with PCOS and 75 unrelated healthy control subjects without a family history of diabetes or PCOS (four age- and weight-matched subgroups, i.e. Control(Mothers), Control(Fathers), Control(Sisters) and Control(Brothers)) were studied. IR was assessed by homeostatic model assessment (HOMA IR), log HOMA, insulin sensivity index (ISI), the quantitative insulin sensitivity check index (QUICKI) and area under the curve for insulin during the oral glucose tolerance test (AUCI, AUCG) in with normal glucose tolerance (NGT) subjects and controls. Serum adiponectin, resistin, homocysteine and lipid levels were measured. The prevalence of any degree of glucose intolerance was 40% in Mothers(PCOS) and 52% in Fathers(PCOS). In total, six (15%) glucose tolerance disorders were identified in the Control(Mothers) and Control(Fathers) in first degree relatives of control subjects. The first degree relatives of PCOS patients had significantly higher serum fasting insulin, HOMA-IR, Log HOMA and AUCI levels in all subgroups than the control subjects. The control subjects had significantly elevated QUCKI, ISI levels and serum adiponectin levels compared to the first degree relatives of PCOS subjects in all subgroups. The serum Hcy and resistin levels increased significantly in both Fathers(PCOS) and Mothers(PCOS) groups but not Brothers(PCOS) and Sister(PCOS). The results of the present study support the finding that the first degree relatives of PCOS patients carry an increased risk of cardiovascular disease, as do PCOS patients.

Adolescent obesity and future college degree attainment.

Science.gov (United States)

Fowler-Brown, Angela G; Ngo, Long H; Phillips, Russell S; Wee, Christina C

2010-06-01

The current impact of adolescent obesity on educational attainment is not clear. The objectives of our study were to determine whether adolescent obesity is associated with college degree attainment and how this association may have changed over time. We used data from a contemporary national cohort of over 4,000 persons who were adolescents (aged 14-18) in 1997 to assess the relationship between adolescent obesity and education. To assess for changes in this relationship over time, we also analyzed an older, similarly structured cohort of over 3,000 persons who were adolescents (aged 16-18) in 1981. Our primary outcome was college degree completion. We found that in the older cohort (adolescents in 1979), there were no differences in college degree attainment by adolescent weight status before and after adjustment. However, unadjusted analysis of the contemporary cohort (adolescents in 1997) demonstrated that those who were normal weight as adolescents had a higher prevalence of college degree attainment at follow-up compared to obese adolescents (24% vs. 10%). After adjustment for socio-demographic variables (age, sex, race, height, parental income-to-poverty ratio, parental education, aptitude test scores), obese adolescents were less likely to have attained a college degree compared to normal weight peers (adjusted risk ratio 0.61 95% confidence interval 0.38-0.83). Expectations for a future college degree did not vary by weight status and did not explain this observation. In conclusion, adolescent obesity is associated with lower likelihood of college completion. This relationship was not observed in an older cohort of adolescents.

Quasi-monoenergetic neutron energy spectra for 246 and 389 MeV (7)Li(p,n) reactions at angles from 0 degrees to 300 degrees

CERN Document Server

Iwamoto, Y; Nakamura, T; Nakashima, H; Mares, V; Itoga, T; Matsumoto, T; Nakane, Y; Feldbaumer, E; Jaegerhofer, L; Pioch, C; Tamii, A; Satoh, D; Masuda, A; Sato, T; Iwase, H; Yashima, H; Nishiyama, J; Hagiwara, M; Hatanaka, K; Sakamoto, Y

2011-01-01

The authors measured the neutron energy spectra of a quasi-monoenergetic (7)Li(p,n) neutron source with 246 and 389 MeV protons set at seven angles (0 degrees, 2.5 degrees, 5 degrees, 10 degrees, 15 degrees, 20 degrees and 30 degrees), using a time-of-flight (TOF) method employing organic scintillators NE213 at the Research Center for Nuclear Physics (RCNP) of Osaka University. The energy spectra of the source neutrons were precisely deduced down to 2 MeV at 0 degrees and 10 MeV at other angles. The cross-sections of the peak neutron production reaction at 0 degrees were on the 35-40 mb line of other experimental data, and the peak neutron angular distribution agreed well with the Taddeucci formula. Neutron energy spectra below 100 MeV at all angles were comparable, but the shapes of the continuum above 150 MeV changed considerably with the angle. In order to consider the correction required to derive the response in the peak region from the measured total response for high-energy neutron monitors such as DAR...

THE VALUE OF EDUCATIONAL DEGREES IN TURBULENT ECONOMIC TIMES: EVIDENCE FROM THE YOUTH DEVELOPMENT STUDY

Science.gov (United States)

Mortimer, Jeylan T.; Staff, Jeremy

2016-01-01

Rising costs of higher education have prompted debate about the value of college degrees. Using mixed effects panel models of data from the Youth Development Study (ages 31–37), we compare occupational outcomes (i.e., weekly hours worked, earnings, employment status, career attainment, and job security) between educational attainment categories within year, and within categories across years, from 2005 to 2011, capturing the period before, during, and in the aftermath of the Great Recession. Our findings demonstrate the long-term value of post-secondary degrees. Bachelor’s and Associate’s degree recipients, while experiencing setbacks at the height of recession, were significantly better off than those with some or no college attendance. Vocational-Technical degree holders followed a unique trajectory: pre-recession, they are mostly on par with Associate’s and Bachelor’s recipients, but they are hit particularly hard by the recession and then rebound somewhat afterwards. Our findings highlight the perils of starting but not finishing post-secondary educational programs. PMID:26973042

The value of educational degrees in turbulent economic times: Evidence from the Youth Development Study.

Science.gov (United States)

Vuolo, Mike; Mortimer, Jeylan T; Staff, Jeremy

2016-05-01

Rising costs of higher education have prompted debate about the value of college degrees. Using mixed effects panel models of data from the Youth Development Study (ages 31-37), we compare occupational outcomes (i.e., weekly hours worked, earnings, employment status, career attainment, and job security) between educational attainment categories within year, and within categories across years, from 2005 to 2011, capturing the period before, during, and in the aftermath of the Great Recession. Our findings demonstrate the long-term value of post-secondary degrees. Bachelor's and Associate's degree recipients, while experiencing setbacks at the height of recession, were significantly better off than those with some or no college attendance. Vocational-Technical degree holders followed a unique trajectory: pre-recession, they are mostly on par with Associate's and Bachelor's recipients, but they are hit particularly hard by the recession and then rebound somewhat afterwards. Our findings highlight the perils of starting but not finishing post-secondary educational programs. Copyright © 2016 Elsevier Inc. All rights reserved.

Influence of degree correlations on network structure and stability in protein-protein interaction networks

Directory of Open Access Journals (Sweden)

Zimmer Ralf

2007-08-01

Full Text Available Abstract Background The existence of negative correlations between degrees of interacting proteins is being discussed since such negative degree correlations were found for the large-scale yeast protein-protein interaction (PPI network of Ito et al. More recent studies observed no such negative correlations for high-confidence interaction sets. In this article, we analyzed a range of experimentally derived interaction networks to understand the role and prevalence of degree correlations in PPI networks. We investigated how degree correlations influence the structure of networks and their tolerance against perturbations such as the targeted deletion of hubs. Results For each PPI network, we simulated uncorrelated, positively and negatively correlated reference networks. Here, a simple model was developed which can create different types of degree correlations in a network without changing the degree distribution. Differences in static properties associated with degree correlations were compared by analyzing the network characteristics of the original PPI and reference networks. Dynamics were compared by simulating the effect of a selective deletion of hubs in all networks. Conclusion Considerable differences between the network types were found for the number of components in the original networks. Negatively correlated networks are fragmented into significantly less components than observed for positively correlated networks. On the other hand, the selective deletion of hubs showed an increased structural tolerance to these deletions for the positively correlated networks. This results in a lower rate of interaction loss in these networks compared to the negatively correlated networks and a decreased disintegration rate. Interestingly, real PPI networks are most similar to the randomly correlated references with respect to all properties analyzed. Thus, although structural properties of networks can be modified considerably by degree

The current impact of entry-level associate and baccalaureate degree education on the diversity of respiratory therapists.

Science.gov (United States)

Becker, Ellen A; Nguyen, Xuan T

2014-12-01

Transitioning from an associate degree to a baccalaureate degree for respiratory therapists has been suggested as a new entry-level educational standard. One potential risk for this change is that it may limit the diversity of potential applicants for entry-level education. A diverse workforce is important to achieve the goal of reducing healthcare disparities. This study evaluated characteristics of therapists who completed associate and baccalaureate degree entry-level education. A secondary analysis of data collected from the 2009 AARC Respiratory Therapist Human Resource Survey explored relationships between the choice of entry-level associate or baccalaureate education and variables of gender, race, salary, career advancement, and job satisfaction. There were no differences between therapists with entry-level associate and baccalaureate degrees in gender, race, number of additional healthcare credentials, numbers of life support credentials, wages, delivering respiratory care by protocol, and job satisfaction. There were significantly higher percentages of advanced academic degrees, desire to pursue a higher academic degree, registered respiratory therapist credentials, total National Board for Respiratory Care credentials, and leadership roles for therapists with baccalaureate entry-level degrees. Current entry-level associate and baccalaureate degree graduates have similar gender and race proportions. This finding challenges concerns that an entry-level baccalaureate degree would decrease the diversity of the respiratory therapist workforce. Copyright © 2014 by Daedalus Enterprises.

The Effect of Obesity Degree on Childhood Pulmonary Function Tests

Directory of Open Access Journals (Sweden)

Emel Torun

2014-09-01

Full Text Available Background: Childhood obesity has become a global epidemic. It is related to several chronic diseases such as essential hypertension, type 2 diabetes mellitus, and renal disease. The relationship between the degree of obesity and lung functions is well defined in adults, but limited information is available about the childhood period. Aims: This study aims to determine the impact of the degree of obesity on the pulmonary functions of school children and adolescents. Study Design: Cross sectional study. Methods: Included in the study were a total of 170 school children and adolescents (9-17 years old referred to our paediatric outpatient clinic. Of these subjects, 42 were lean and non-obese (BMI % <85, 30 subjects were overweight (BMI % ˃85, <95, 34 subjects were obese (BMI % ˃95, <97, and 64 subjects were morbidly obese (BMI % ˃97. Anthropometric measurements were taken and spirometry was performed on all subjects. Forced vital capacity (FVC, forced expiratory volume in 1 second (FEV1, forced vital capacity 25-75 (FEV25-75 and peak expiratory flow (PEF were used to measure the ventilatory functions for all the subjects. Results: The groups showed no significant differences in age or gender. Despite no statistically significant differences in FEV1, FVC, or FEV1/FVC, there were significant reductions in PEF (p<0.001 and FEV25-75 (p<0.001 in the overweight, obese and morbidly obese subjects, when compared with those who were non-obese. Conclusion: Overweight, obese and morbidly obese children have no obstructive abnormalities compared with healthy lean subjects.

Does Degree of Work Task Completion Influence Retrieval Performance?

DEFF Research Database (Denmark)

Ingwersen, Peter; Bogers, Toine; Lykke, Marianne

2010-01-01

their perception of task completion. Also, with the exception of full text records and across all document types, both measured at rank 10, no statistically significant correlation is observed with respect to retrieval performance influenced by degrees of perceived work task completion or individual types......In this contribution we investigate the potential influence between assessors’ perceived completion of their work task at hand and their actual assessment of usefulness of the retrieved information. The results indicate that the number of useful documents found by assessors does not influence...

Pyrolysis characteristics of integrated circuit boards at various particle sizes and temperatures

Energy Technology Data Exchange (ETDEWEB)

Chiang, H.-L. [Department Risk Management, China Medical University, Taichung 40402, Taiwan (China)], E-mail: hlchiang@mail.cmu.edu.tw; Lin, K.-H. [Department of Environmental Engineering, Fooyin University, Kaohsiung 831, Taiwan (China); Lai, M.-H. [Department of Environmental Engineering, Dayeh University, Changhua 51591, Taiwan (China); Chen, T.-C. [Department of Environmental Science and Engineering, Pingtung University of Science and Technology, Pingtung 91201, Taiwan (China); Ma, S.-Y. [Department of Environmental Engineering, Fooyin University, Kaohsiung 831, Taiwan (China)

2007-10-01

A pyrolysis method was employed to recycle the metals and brominated compounds blended into printed circuit boards. This research investigated the effect of particle size and process temperature on the element composition of IC boards and pyrolytic residues, liquid products, and water-soluble ionic species in the exhaust, with the overall goal being to identify the pyrolysis conditions that will have the least impact on the environment. Integrated circuit (IC) boards were crushed into 5-40 mesh (0.71-4.4 mm), and the crushed particles were pyrolyzed at temperatures ranging from 200 to 500 deg. C. The thermal decomposition kinetics were measured by a thermogravimetric (TG) analyzer. The composition of pyrolytic residues was analyzed by Energy Dispersive X-ray Spectrometer (EDS), Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). In addition, the element compositions of liquid products were analyzed by ICP-AES and ICP-MS. Pyrolytic exhaust was collected by a water-absorption system in an ice-bath cooler, and IC analysis showed that the absorbed solution comprised 11 ionic species. Based on the pyrolytic kinetic parameters of TG analysis and pyrolytic residues at various temperatures for 30 min, the effect of particle size was insignificant in this study, and temperature was the key factor for the IC board pyrolysis. Two stages of decomposition were found for IC board pyrolysis under nitrogen atmosphere. The activation energy was 38-47 kcal/mol for the first-stage reaction and 5.2-9.4 kcal/mol for the second-stage reaction. Metal content was low in the liquid by-product of the IC board pyrolysis process, which is an advantage in that the liquid product could be used as a fuel. Brominate and ammonium were the main water-soluble ionic species of the pyrolytic exhaust. A plan for their safe and effective disposal must be developed if the pyrolytic recycling process is to be applied to IC boards.

Pyrolysis characteristics of integrated circuit boards at various particle sizes and temperatures

International Nuclear Information System (INIS)

Chiang, H.-L.; Lin, K.-H.; Lai, M.-H.; Chen, T.-C.; Ma, S.-Y.

2007-01-01

A pyrolysis method was employed to recycle the metals and brominated compounds blended into printed circuit boards. This research investigated the effect of particle size and process temperature on the element composition of IC boards and pyrolytic residues, liquid products, and water-soluble ionic species in the exhaust, with the overall goal being to identify the pyrolysis conditions that will have the least impact on the environment. Integrated circuit (IC) boards were crushed into 5-40 mesh (0.71-4.4 mm), and the crushed particles were pyrolyzed at temperatures ranging from 200 to 500 deg. C. The thermal decomposition kinetics were measured by a thermogravimetric (TG) analyzer. The composition of pyrolytic residues was analyzed by Energy Dispersive X-ray Spectrometer (EDS), Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). In addition, the element compositions of liquid products were analyzed by ICP-AES and ICP-MS. Pyrolytic exhaust was collected by a water-absorption system in an ice-bath cooler, and IC analysis showed that the absorbed solution comprised 11 ionic species. Based on the pyrolytic kinetic parameters of TG analysis and pyrolytic residues at various temperatures for 30 min, the effect of particle size was insignificant in this study, and temperature was the key factor for the IC board pyrolysis. Two stages of decomposition were found for IC board pyrolysis under nitrogen atmosphere. The activation energy was 38-47 kcal/mol for the first-stage reaction and 5.2-9.4 kcal/mol for the second-stage reaction. Metal content was low in the liquid by-product of the IC board pyrolysis process, which is an advantage in that the liquid product could be used as a fuel. Brominate and ammonium were the main water-soluble ionic species of the pyrolytic exhaust. A plan for their safe and effective disposal must be developed if the pyrolytic recycling process is to be applied to IC boards

Risk of osteoporosis in first degree relatives of patients with diabetes mellitus: a study of bone mineral ions

International Nuclear Information System (INIS)

Rana, G.E.; Malik, A.; Khurshid, R.

2011-01-01

Diabetes may influence the bone in multiple pathways, some with contradictory effects. These mechanisms include changes in insulin and hypercalciuria, phophatemia, hypomagnesaemia associated with glycosuria. We tried to find out level of minerals in first degree relatives of patients with diabetes mellitus as there is relationship between bone minerals and glycemic controls. Methods: Fifty local subjects age range 40 -50 years with family history of diabetes (first degree relatives) were included in the study. Duration of study was 6 months. Levels of blood sugar, serum calcium, phosphorus and magnesium were estimated by standard Randox kits. 10 males and 10 female subjects with no history of diabetes were considered as normal controls. Results: The level of blood glucose in both sexes was increased as compared to their controls but this showed no significant difference. Level of serum calcium and magnesium were significantly decreased (p<0.05, 0.001) in both males and females when compared with the values of their controls. Level of phosphorous was significantly increased ( p<0.05) in both first degree relatives of ma le and females as compared to level of phosphorous of their controls. Conclusion: Pre-diabetes and undiagnosed T2DM are conditions for which screening can be helpful to find out that first degree relatives not only at risk to develop diabetes but they also likely to develop osteoporosis in a sizable portion of the population. However there is a need for further research including the incidence and risk factors for osteoporotic fractures in first degree relatives of diabetics. (author)

Influence of the degree of thermal contact in fin and tube heat exchanger

DEFF Research Database (Denmark)

Singh, Shobhana; Sørensen, Kim; Condra, Thomas Joseph

2016-01-01

Present work aims to investigate the significance of thermal contact area between fins and tubes in a heat exchanger. The heat exchanger type selected for the study is a liquid-gas fin and tube heat exchanger. Four different cases namely I, II, III, and IV, based on a variable degree of thermal...... contact between fins and tubes are investigated. Case-I with 100% thermal contact area between the fin and tube is set as a reference to cases-II, III, and IV with a thermal contact area of approximately 70%, 50%, and 35%, respectively. Three-dimensional (3D) steady-state numerical models based on finite...... and to compare the performance of heat exchanger design in different cases. Comparative analysis indicates a significant influence of the degree of the thermal contact area between fin and tube on the overall performance. Case-I is found to have higher overall heat transfer coefficient of 47.332 W/(m2 K), higher...

Sensitization of rat 9L gliosarcoma cells to low dose rate irradiation by long duration 41 degrees C hyperthermia.

Science.gov (United States)

Armour, E P; Wang, Z H; Corry, P M; Martinez, A

1991-06-15

Modification of survival by long duration, 41 degrees C hyperthermia in combination with low dose rate radiation (0.5 Gy/h) was determined in rat 9L gliosarcoma cells. Cells were exposed to radiation in a manner that simulated continuous irradiation at a dose rate relevant to clinical brachytherapy. High dose rate X-irradiation was fractionated in 1.0-Gy fractions at 2-h intervals (FLDRI). Previous studies had demonstrated that 9L cells exposed to FLDRI with these parameters have survival characteristics that are equivalent to continuous low dose rate irradiation. Cells exposed to 41 degrees C throughout FLDRI were sensitized significantly (thermal enhancement ratio of 2.07) compared with cells irradiated at 37 degrees C. Incubation for 24 h at 41 degrees C before and/or after FLDRI at either 37 degrees C or 41 degrees C did not increase the slope of the radiation survival curves but did reduce the shoulder. Similarly, heating at 43 degrees C for 30 or 60 min before and/or after irradiation at 0.5 Gy/h also did not enhance cell sensitivity. Survival of cells after irradiation at high dose rate (60 Gy/h) was independent of the temperature during irradiation. Preheat at 41 degrees C for 24 h did not sensitize cells to high dose rate irradiation by increasing the slope of the survival curve, although a loss of shoulder was observed. Sensitization of cells heated at 43 degrees C for 30 or 60 min before high dose rate irradiation was expressed as classical slope modification. Our results demonstrate that 41 degrees C heating during FLDRI greatly sensitizes cells to radiation-induced killing for exposure durations up to 36 h. Heating 9L cells at 41 degrees C or 43 degrees C adjacent to FLDRI at 0.5 Gy/h resulted in no additional enhancement of terminal sensitivity, although shoulder modification was observed. The sensitization by simultaneous heating described above occurred even though thermotolerance developed during extended incubation at 41 degrees C. These in vitro

Increasingly Global: Combining an International Business Degree with a Post-Degree Designation

Science.gov (United States)

Smith, Rachel; Terry, Andy; Vibhakar, Ashvin

2006-01-01

In the increasingly complex and competitive global marketplace, many students seek to gain multiple skills and credentials that can aid them in their career goals. One such career strategy weds a general overarching comprehensive degree with a specific and targeted skill set. This paper provides a viable curriculum path for students who seek…

Pyrolytic Behaviour of the Commercial Terphenyl Mixtures. Propil OM1, OM2 and OMP

International Nuclear Information System (INIS)

Barrera Pinero, R.; Manero Rodriguez, J.

1963-01-01

Statistic tests on the thermal stability of the three above mentioned materials and pure para-terphenyl, at temperatures ranging 400-470 degree centigrade, are described. Several conclusions are attained with respect to the kinetics of the pyrolysis decomposition, which was controlled according to the following steps: a) Gas evolution (hydrogen and hydrocarbons). B) Intermediate boiling compound formation, such as biphenyl, benzene.alkyl-benzenes, etc. c) high boiling compound evolution. d) Decreasing of starting material. In this way, comparative data en decomposition rate and activation energy of the pyrolysis phenomena are tabulated. (Author) 15 refs

Comparison between different methods of breast implant volume choice and degree of postoperative satisfaction

Directory of Open Access Journals (Sweden)

RAFAEL DAIBERT DE SOUZA MOTTA

2018-02-01

Full Text Available ABSTRACT Objectives: to assess the degree of patient satisfaction after undergoing breast augmentation and compare three different, easy, inexpensive and universal methods of preoperative choice of breast implant volume. Methods: a prospective study was carried out at University Hospital Pedro Ernesto of State University of Rio de Janeiro, in 94 women from Rio de Janeiro, aged 18 to 49 years, submitted to breast augmentation mammaplasty with breast implant due to hypomastia. All implants were textured, with a round base and high projection and were introduced into the retroglandular space through an inframammary access. The patients were divided into three groups: Control, Silicone and MamaSize®, with 44, 25 and 25 patients, respectively. Satisfaction questionnaires were applied in the pre and postoperative periods by the same evaluator, through the visual analogue scale, in which ‘0’ meant very unsatisfied and ‘100’ very satisfied for the four variables: shape, size, symmetry and consistency. The degree of satisfaction with the surgical scar was also assessed in the postoperative period. Results: when the preoperative and postoperative satisfaction levels were compared, there was a difference in all variables for the three groups, with statistical significance. However, when the postoperative data were compared with each other, there was no significant difference. The degree of satisfaction with the surgical scar was high. Conclusion: the augmentation mammaplasty with breast implant had a high index of satisfaction among patients. However, there was no difference in the degree of satisfaction in the postoperative period between the three methodologies of breast volume measurement.

Significance of prevertebral soft tissue measurement in cervical spine injuries

Energy Technology Data Exchange (ETDEWEB)

Dai Liyang E-mail: lydai@etang.com

2004-07-01

Objective: The objective of this study was to evaluate the diagnostic value of prevertebral soft tissue swelling in cervical spine injuries. Materials and methods: A group of 107 consecutive patients with suspected injuries of the cervical vertebrae were reviewed retrospectively to identify the presence of prevertebral soft tissue swelling and to investigate the association of prevertebral soft tissue swelling with the types and degrees of cervical spine injuries. Results: Prevertebral soft tissue swelling occurred in 47 (43.9%) patients. Of the 47 patients, 38 were found with bony injury and nine were without. The statistic difference was significant (P<0.05). No correlation was demonstrated between soft tissue swelling and either the injured level of the cervical vertebrae or the degree of the spinal cord injury (P>0.05). Anterior element injuries in the cervical vertebrae had widening of the prevertebral soft tissue more than posterior element injuries (P<0.05). Conclusion: The diagnostic value of prevertebral soft tissue swelling for cervical spine injuries is significant, but the absence of this sign does not mean that further image evaluation can be spared.

X-ray photoelectron spectroscopic and morphologic studies of Ru nanoparticles deposited onto highly oriented pyrolytic graphite

Energy Technology Data Exchange (ETDEWEB)

Bavand, R.; Yelon, A.; Sacher, E., E-mail: edward.sacher@polymtl.ca

2015-11-15

Highlights: • Ru nanoparticle 3d, 3p, and 3s core XPS spectra were found to be composed of three symmetric components. The first component, Ru1, is due to zerovalent R, while components Ru2 and Ru3 are attributed to surface oxide species. • The nanoparticle surface additionally possesses a carbon-rich surface, from residual gas hydrocarbons present in the vacuum. • TEM photomicrographs show the aggregation and partial coalescence of nanoparticles deposited at high deposition rates, provoked by the high rate of release of the heat of condensation, indicating weak bonding to the HOPG substrate. • The analysis of the valence band indicates an increase of the Kubo gap with decreasing NP size, accompanied by an abrupt electron spill-over from the 4d to the 5s orbital. - Abstract: Ruthenium nanoparticles (Ru NPs) function as effective catalysts in specific reactions, such as methanation and Fischer-Tropsch syntheses. It is our purpose to physicochemically characterize their surfaces, at which catalysis occurs, by surface-sensitive X-ray photoelectron spectroscopy (XPS), using the symmetric peak component anaylsis technique developed in our laboratory to reveal previously hidden components. Ru NPs were deposited by evaporation (0.25–1.5 nm nominal deposition range) onto highly oriented pyrolytic graphite (HOPG). In addition to their surfaces being characterized by XPS, an indication of morphology was obtained from transmission electron microscopy (TEM). Our use of symmetric peak component XPS analysis has revealed detailed information on a previously unidentified surface oxide initially formed, as well as on the valence electronic structure and its variation with NP size, information that is of potential importance in the use of these NPs in catalysis. Each of the several Ru core XPS spectra characterized (3d, 3p and 3s) was found to be composed of three symmetric components. Together with two metal oxide O1s components, these give evidence of a rather complex

Impact of a dual PharmD/MBA degree on graduates' academic performance, career opportunities, and earning potential.

Science.gov (United States)

Chumney, Elinor C G; Ragucci, Kelly R; Jones, Kathy J

2008-04-15

To evaluate the academic experience and satisfaction of students who completed a dual PharmD/MBA degree program and the program's long-term impact on the students' career choice and earning potential. GPAs, job placement, and starting job salaries were compared between graduates who completed the dual PharmD/MBA program and those who completed only the PharmD program. A satisfaction survey instrument was administered to 17 students who completed the dual PharmD/MBA degree program in May 2007. Data from a standardized job placement and starting salary survey instrument completed by all PharmD graduates were also obtained, as well as all students' final grade point averages (GPAs). GPAs, job placement, and starting job salaries were compared between graduates who had completed the dual PharmD/MBA program and those who had completed only the PharmD program. The graduating GPAs of dual-degree students were higher than those of both pharmacy (3.52 vs 3.41, p > 0.10) and business (3.82 vs. 3.68, p = 0.018) students not enrolled in the dual-degree program. Dual-degree students were slightly less likely to enter a residency (17% vs. 27%, p = 0.44) than other pharmacy graduates. Among those who elected not to pursue a residency, both mean starting salaries ($111,090 vs. $101,965) and mean total first-year compensation ($127,290 vs. $110,388) were significantly higher for dual-degree graduates compared to the PharmD graduates. Students enrolled in the dual-degree program did slightly better academically than students who completed only the MBA or PharmD programs and indicated a high level of satisfaction with the program. Dual-degree graduates reported increased career opportunities and were slated to earn significantly more during their first year in the workforce. These results affirm continuation of our program and make the case for support of similar programs across the nation.

Roster of Astronomy Departments with Enrollment and Degree Data, 2012: Results from the 2012 Survey of Enrollments and Degrees. Focus On

Science.gov (United States)

Nicholson, Starr; Mulvey, Patrick J.

2013-01-01

The U.S. has experienced a sharp increase in the number of bachelor astronomy degrees awarded in recent years with about twice as many degrees now being awarded than a decade ago. There were 385 astronomy bachelor's degrees awarded in the 2011-12 academic year. The number of astronomy PhDs awarded in recent years is up about 50% from a decade…

Increased UV-induced sister-chromatid exchange in cultured fibroblasts of first-degree relatives of melanoma patients

International Nuclear Information System (INIS)

Knees-Matzen, S.; Roser, M.; Reimers, U.; Ehlert, U.; Weichenthal, M.; Breitbart, E.W.; Ruediger, H.W.

1991-01-01

Cultured fibroblasts of 17 first-degree relatives of familial melanoma patients and six first-degree relatives of cutaneous melanoma (CMM) patients with multiple CMM primaries were tested for in vitro sensitivity to UV light. Fibroblasts of nine familial CMM patients with a known UV-sensitivity and 19 healthy probands served as a control. Sister chromatid exchange (SCE) was used as a parameter to detect UV-induced genotoxic damage. The authors found significantly (p less than 0.001) increased UV-induced SCE levels in familial melanoma patients, as well as in first-degree relatives of familial melanoma patients (p less than 0.001) after UV-A,B irradiation (375 J/m2), compared to the healthy probands without a family history of CMM. A significant (p less than 0.001) increase of UV-induced SCE was also observed in the relatives of CMM patients with multiple CMM primaries. In addition, the spontaneous SCE were significantly increased (p less than 0.05) in familial CMM patients. This study shows that increased UV sensitivity is a familial phenomenon. It is consistent with the concept of a genetic predisposition to CMM, which is based on increased UV sensitivity and may help to define groups with an elevated risk of developing cutaneous malignant melanoma

Current Trends in Associate Degree Nursing Programs.

Science.gov (United States)

Blackstone, Elaine Grant

This study was designed to ascertain current trends in associate degree nursing programs and to discover innovative ideas and techniques which could be applied to the existing program at Miami-Dade Community College (Florida). Data was compiled from interviews with representatives of ten associate degree nursing programs in six states. Information…

Study of composition of espresso coffee prepared from various roast degrees of Coffea arabica L. coffee beans.

Science.gov (United States)

Kučera, Lukáš; Papoušek, Roman; Kurka, Ondřej; Barták, Petr; Bednář, Petr

2016-05-15

Espresso coffee samples prepared at various roasting degrees defined according to its basic conventional classification (light, medium, medium-dark and dark roasted) were analyzed by ultra-performance liquid chromatography/tandem mass spectrometry. Obtained raw data were processed using multivariate statistical analysis (Principal Component Analysis, PCA) to evaluate chemical differences between each roasting degrees (untargeted part of study). All four roasting degrees were resolved in appropriate Score plot. Orthogonal Projections to Latent Structures provided signals of significant markers describing the differences among particular roasting degrees. Detailed interpretation of those signals by targeted LC/MS(2) analysis revealed four groups of compounds. The first two groups involve chlorogenic acids and related lactones. The signals of other two sets of markers were ascribed to some specific atractylosides and particular melanoidins. Ratios of contents of selected representatives of each group to the sum of all identified markers were proposed as definite parameters for determination of roasting degree of Brazilian coffee Arabica. Copyright © 2015 Elsevier Ltd. All rights reserved.

Requirements of British universities for higher medical degrees.

OpenAIRE

Johnson, R

1991-01-01

OBJECTIVE--To examine the requirements and opportunities for obtaining a doctor of medicine or master of surgery degree from a university in the United Kingdom other than the graduate's own, particularly in the case of foreign graduates. DESIGN--Review of regulations governing the award of doctor of medicine and master of surgery degrees in British universities. SETTING--All 19 universities in the United Kingdom offering clinical courses. MAIN OUTCOME MEASURE--Availability of degrees to gradu...

Self-locking degree-4 vertex origami structures.

Science.gov (United States)

Fang, Hongbin; Li, Suyi; Wang, K W

2016-11-01

A generic degree-4 vertex (4-vertex) origami possesses one continuous degree-of-freedom for rigid folding, and this folding process can be stopped when two of its facets bind together. Such facet-binding will induce self-locking so that the overall structure stays at a pre-specified configuration without additional locking elements or actuators. Self-locking offers many promising properties, such as programmable deformation ranges and piecewise stiffness jumps, that could significantly advance many adaptive structural systems. However, despite its excellent potential, the origami self-locking features have not been well studied, understood, and used. To advance the state of the art, this research conducts a comprehensive investigation on the principles of achieving and harnessing self-locking in 4-vertex origami structures. Especially, for the first time, this study expands the 4-vertex structure construction from single-component to dual-component designs and investigates their self-locking behaviours. By exploiting various tessellation designs, this research discovers that the dual-component designs offer the origami structures with extraordinary attributes that the single-component structures do not have, which include the existence of flat-folded locking planes, programmable locking points and deformability. Finally, proof-of-concept experiments investigate how self-locking can effectively induce piecewise stiffness jumps. The results of this research provide new scientific knowledge and a systematic framework for the design, analysis and utilization of self-locking origami structures for many potential engineering applications.

Protograph LDPC Codes with Node Degrees at Least 3

Science.gov (United States)

Divsalar, Dariush; Jones, Christopher

2006-01-01

In this paper we present protograph codes with a small number of degree-3 nodes and one high degree node. The iterative decoding threshold for proposed rate 1/2 codes are lower, by about 0.2 dB, than the best known irregular LDPC codes with degree at least 3. The main motivation is to gain linear minimum distance to achieve low error floor. Also to construct rate-compatible protograph-based LDPC codes for fixed block length that simultaneously achieves low iterative decoding threshold and linear minimum distance. We start with a rate 1/2 protograph LDPC code with degree-3 nodes and one high degree node. Higher rate codes are obtained by connecting check nodes with degree-2 non-transmitted nodes. This is equivalent to constraint combining in the protograph. The condition where all constraints are combined corresponds to the highest rate code. This constraint must be connected to nodes of degree at least three for the graph to have linear minimum distance. Thus having node degree at least 3 for rate 1/2 guarantees linear minimum distance property to be preserved for higher rates. Through examples we show that the iterative decoding threshold as low as 0.544 dB can be achieved for small protographs with node degrees at least three. A family of low- to high-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

Counterfactual Reasoning in Non-psychotic First-Degree Relatives of People with Schizophrenia

Directory of Open Access Journals (Sweden)

Auria eAlbacete

2016-05-01

Full Text Available Counterfactual thinking (CFT is a type of conditional reasoning that enables the generation of mental simulations of alternatives to past factual events. Previous research has found this cognitive feature to be disrupted in schizophrenia. At the same time, the study of cognitive deficits in unaffected relatives of people with schizophrenia has significantly increased, supporting its potential endophenotypic role in this disorder. Using an exploratory approach, the current study examined CFT for the first time in a sample of non-psychotic first-degree relatives of schizophrenia patients (N=43, in comparison with schizophrenia patients (N=54 and healthy controls (N=44. A series of tests that assessed the causal order effect in CFT and the ability to generate counterfactual thoughts and counterfactually derive inferences using the Counterfactual Inference Test was completed. Associations with variables of basic and social cognition, levels of schizotypy and psychotic-like experiences in addition to clinical and sociodemographic characteristics were also explored. Findings showed that first-degree relatives generated a lower number of counterfactual thoughts than controls, and were more adept at counterfactually deriving inferences, specifically in the scenarios related to regret and to judgements of avoidance in an unusual situation. No other significant results were found. These preliminary findings suggest that non-psychotic first-degree relatives of schizophrenia patients show a subtle disruption of global counterfactual thinking compared with what is normally expected in the general population. Because of the potential impact of such deficits, new treatments targeting CFT improvement might be considered in future management strategies.

Structure and origin of the 85 degrees E ridge

Digital Repository Service at National Institute of Oceanography (India)

Ramana, M.V.; Subrahmanyam, V.; Chaubey, A.K.; Ramprasad, T.; Sarma, K.V.L.N.S.; Krishna, K.S.; Desa, M.; Murty, G.P.S.; Subrahmanyam, C

The submerged 85 degrees E Ridge in the Bay of Bengal trends approximately N-S between 19 degrees N and 6 degrees N latitudes. Off the southeast coast of Sri Lanka it takes an arcuate shape and seems to terminate with the northweard extension...

Shrinkage Degree in $L_{2}$ -Rescale Boosting for Regression.

Science.gov (United States)

Xu, Lin; Lin, Shaobo; Wang, Yao; Xu, Zongben

2017-08-01

L 2 -rescale boosting ( L 2 -RBoosting) is a variant of L 2 -Boosting, which can essentially improve the generalization performance of L 2 -Boosting. The key feature of L 2 -RBoosting lies in introducing a shrinkage degree to rescale the ensemble estimate in each iteration. Thus, the shrinkage degree determines the performance of L 2 -RBoosting. The aim of this paper is to develop a concrete analysis concerning how to determine the shrinkage degree in L 2 -RBoosting. We propose two feasible ways to select the shrinkage degree. The first one is to parameterize the shrinkage degree and the other one is to develop a data-driven approach. After rigorously analyzing the importance of the shrinkage degree in L 2 -RBoosting, we compare the pros and cons of the proposed methods. We find that although these approaches can reach the same learning rates, the structure of the final estimator of the parameterized approach is better, which sometimes yields a better generalization capability when the number of sample is finite. With this, we recommend to parameterize the shrinkage degree of L 2 -RBoosting. We also present an adaptive parameter-selection strategy for shrinkage degree and verify its feasibility through both theoretical analysis and numerical verification. The obtained results enhance the understanding of L 2 -RBoosting and give guidance on how to use it for regression tasks.

Administrators' Perceptions of Motives to Offer Online Academic Degree Programs in Universities

Science.gov (United States)

Özcan, Hakan; Yildirim, Soner

2018-01-01

Although the number of online academic degree programs offered by universities in Turkey has become increasingly significant in recent years, the current lack of understanding of administrators' motives that contribute to initiating these programs suggests there is much to be learned in this field. This study aimed to investigate administrators'…

Maximizing the Spread of Influence via Generalized Degree Discount.

Science.gov (United States)

Wang, Xiaojie; Zhang, Xue; Zhao, Chengli; Yi, Dongyun

2016-01-01

It is a crucial and fundamental issue to identify a small subset of influential spreaders that can control the spreading process in networks. In previous studies, a degree-based heuristic called DegreeDiscount has been shown to effectively identify multiple influential spreaders and has severed as a benchmark method. However, the basic assumption of DegreeDiscount is not adequate, because it treats all the nodes equally without any differences. To consider a general situation in real world networks, a novel heuristic method named GeneralizedDegreeDiscount is proposed in this paper as an effective extension of original method. In our method, the status of a node is defined as a probability of not being influenced by any of its neighbors, and an index generalized discounted degree of one node is presented to measure the expected number of nodes it can influence. Then the spreaders are selected sequentially upon its generalized discounted degree in current network. Empirical experiments are conducted on four real networks, and the results show that the spreaders identified by our approach are more influential than several benchmark methods. Finally, we analyze the relationship between our method and three common degree-based methods.

Dirac's minimum degree condition restricted to claws

NARCIS (Netherlands)

Broersma, Haitze J.; Ryjacek, Z.; Schiermeyer, I.

1997-01-01

Let G be a graph on n 3 vertices. Dirac's minimum degree condition is the condition that all vertices of G have degree at least . This is a well-known sufficient condition for the existence of a Hamilton cycle in G. We give related sufficiency conditions for the existence of a Hamilton cycle or a

A Degree Distribution Optimization Algorithm for Image Transmission

Science.gov (United States)

Jiang, Wei; Yang, Junjie

2016-09-01

Luby Transform (LT) code is the first practical implementation of digital fountain code. The coding behavior of LT code is mainly decided by the degree distribution which determines the relationship between source data and codewords. Two degree distributions are suggested by Luby. They work well in typical situations but not optimally in case of finite encoding symbols. In this work, the degree distribution optimization algorithm is proposed to explore the potential of LT code. Firstly selection scheme of sparse degrees for LT codes is introduced. Then probability distribution is optimized according to the selected degrees. In image transmission, bit stream is sensitive to the channel noise and even a single bit error may cause the loss of synchronization between the encoder and the decoder. Therefore the proposed algorithm is designed for image transmission situation. Moreover, optimal class partition is studied for image transmission with unequal error protection. The experimental results are quite promising. Compared with LT code with robust soliton distribution, the proposed algorithm improves the final quality of recovered images obviously with the same overhead.

Epilogue: degrees of transparency

NARCIS (Netherlands)

Hengeveld, K.

2011-01-01

In this epilogue the results of the analyses of four different languages in the preceding papers are compared. It is shown that the degrees of transparency of these languages can be represented on an implicational scale, and that the features themselves can be ranked on a transparency scale as well.

Reverse shoulder arthroplasty leads to significant biomechanical changes in the remaining rotator cuff

Directory of Open Access Journals (Sweden)

Perka Carsten

2011-08-01

Full Text Available Abstract Objective After reverse shoulder arthroplasty (RSA external and internal rotation will often remain restricted. A postoperative alteration of the biomechanics in the remaining cuff is discussed as a contributing factor to these functional deficits. Methods In this study, muscle moment arms as well as origin-to-insertion distance (OID were calculated using three-dimensional models of the shoulder derived from CT scans of seven cadaveric specimens. Results Moment arms for humeral rotation are significantly smaller for the cranial segments of SSC and all segments of TMIN in abduction angles of 30 degrees and above (p ≤ 0.05. Abduction moment arms were significantly decreased for all segments (p ≤ 0.002. OID was significantly smaller for all muscles at the 15 degree position (p ≤ 0.005, apart from the cranial SSC segment. Conclusions Reduced rotational moment arms in conjunction with the decrease of OID may be a possible explanation for the clinically observed impaired external and internal rotation.

A measure for isotropy-equilibrium degree of a multi-particle system

International Nuclear Information System (INIS)

Liu Zhiqing; Li Runze; Xu Mingmei; Liu Lianshou

2008-01-01

Aiming at using sphericity as a tool to study the isotropy-equilibrium property of a multi-particle system, in particular the hadronic final state IFS produced in instanton-induced DIS events, we discuss in detail the dependence is sphericity on multiplicity and the multiplicity distribution, as well as on the isotropy degree of the system. A rotational symmetric model with a fluctuating isotropy-degree is constructed, which can fit the mean and width of sphericity of the Monte Carlo IFS-results simultaneously. The IFS from the Monte Carlo simulation is found to be not ideally isotropic but has a probability of 4.7% to be isotropic within error of 5%. The results provide us a description of how far the IFS departs from equilibrium. The method developed is applicable to any Monte Carlo generated multi-particle system, for which the isotropy-equilibrium property is significant. (authors)

Degrees of polarization for a quantum field

International Nuclear Information System (INIS)

Sanchez-Soto, L L; Soederholm, J; Yustas, E C; Klimov, A B; Bjoerk, G

2006-01-01

Unpolarized light is invariant with respect to any SU(2) polarization transformation. Since this fully characterizes the set of density matrices representing unpolarized states, we introduce the degree of polarization of a quantum state as its distance to the set of unpolarized states. We discuss different candidates of distance, and show that they induce fundamentally different degrees of polarization

Degree Output in the South, 1975-76: Distribution by Race.

Science.gov (United States)

Mingle, James R.

The first systematic national count of degree output by race is presented for use by institutional curriculum planners to help give students the opportunity to make realistic choices in career planning. Included are summary tables of degree production by level (doctoral, master's, bachelor's, and first-professional degrees awarded); degree changes…

Making Sense of the Combined Degree Experience: The Example of Criminology Double Degrees

Science.gov (United States)

Wimshurst, Kerry; Manning, Matthew

2017-01-01

Little research has been undertaken on student experiences of combined degrees. The few studies report that a considerable number of students experienced difficulty with the contrasting epistemic/disciplinary demands of the component programmes. A mixed-methods approach was employed to explore the experiences of graduates from four double degrees…

First discoveries of z ˜ 6 quasars with the Kilo-Degree Survey and VISTA Kilo-Degree Infrared Galaxy survey

NARCIS (Netherlands)

Venemans, B. P.; Verdoes Kleijn, G. A.; Mwebaze, J.; Valentijn, E. A.; Bañados, E.; Decarli, R.; de Jong, J. T. A.; Findlay, J. R.; Kuijken, K. H.; Barbera, F. La; Mc Farland, John; McMahon, R. G.; Napolitano, N.; Sikkema, G.; Sutherland, W. J.

2015-01-01

We present the results of our first year of quasar search in the ongoing ESO public Kilo-Degree Survey (KiDS) and VISTA Kilo-Degree Infrared Galaxy (VIKING) surveys. These surveys are among the deeper wide-field surveys that can be used to uncover large numbers of z ˜ 6 quasars. This allows us to

Graphite targets at LAMPF

International Nuclear Information System (INIS)

Brown, R.D.; Grisham, D.L.

1983-01-01

Rotating polycrystalline and stationary pyrolytic graphite target designs for the LAMPF experimental area are described. Examples of finite element calculations of temperatures and stresses are presented. Some results of a metallographic investigation of irradiated pyrolytic graphite target plates are included, together with a brief description of high temperature bearings for the rotating targets

Correlation between Lumbar Lordosis Angle and Degree of Gynoid Lipodystrophy (Cellulite) in Asymptomatic Women

Science.gov (United States)

Milani, Giovana Barbosa; Filho, A’Dayr Natal; João, Sílvia Maria Amado

2008-01-01

INTRODUCTION Gynoid lipodystrophy (cellulite) has been cited as a common dermatological alteration. It occurs mainly in adult women and tends to gather around the thighs and buttocks. Its presence and severity have been related to many factors, including biotype, age, sex, circulatory changes, and, as some authors have suggested, mechanical alterations such as lumbar hyperlordosis. OBJECTIVE To correlate the degree of cellulite with the angle of lumbar lordosis in asymptomatic women. METHODS Fifty volunteers were evaluated by digital photos, palpation, and thermograph. The degree of cellulite was classified on a scale of 1–4. Analyses were performed on the superior, inferior, right and left buttocks (SRB, IRB, SLB, ILB), and the superior right and left thighs (SRT, SLT). The volunteers underwent a lateral-view X-ray, and the angle of lumbar lordosis was measured using Cobb’s method (inferior endplate of T12 and the superior endplate of S). The data were statistically analyzed using ANOVA and Spearman’s correlation. A significance level of 5% was adopted. RESULTS Volunteers had a mean age of 26.1 ± 4.4 years and a mean body mass index of 20.7 ± 1.9 kg/m2. There was no significant difference in lumbar lordosis angle between those with cellulite classes 2 and 3 (p ≥ 0.297). There was also no correlation between lumbar lordosis angle and the degree of cellulite (p ≥ 0.085 and r ≥ 0.246). CONCLUSIONS The analysis suggests that there is no correlation between the degree of cellulite and the angle of lumbar lordosis as measured using Cobb’s method. PMID:18719762

Astronautics degrees for the space industry

Science.gov (United States)

Gruntman, M.; Brodsky, R. F.; Erwin, D. A.; Kunc, J. A.

2004-01-01

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science and Master of Science degree programs in Astronautics combine basic science and engineering classes with specialized classes in space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available entirely through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers while earning their degrees. The new world of distance learning presents new challenges and opens new opportunities. Distance learning, and particularly the introduction of webcasting, transform the organization of the graduate program and class delivery. We describe in detail the program's academic focus, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

Registered Nurse (Associate Degree).

Science.gov (United States)

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of registered nurse (with an associate degree), lists technical competencies and competency builders for 19 units pertinent to the health technologies cluster in general and 5 units specific to the occupation of registered nurse. The following…

Comparison of thoracic kyphosis degree, trunk muscle strength and joint position sense among healthy and osteoporotic elderly women: a cross-sectional preliminary study.

Science.gov (United States)

Granito, Renata Neves; Aveiro, Mariana Chaves; Renno, Ana Claudia Muniz; Oishi, Jorge; Driusso, Patricia

2012-01-01

Increased thoracic kyphosis is one of the most disfiguring consequences of osteoporotic spine fractures in the elderly. However, mechanisms involved in the increasing of the kyphosis degree among osteoporotic women are not completely understood. Then, the aims of this cross-sectional preliminary study were comparing thoracic kyphosis degree, trunk muscle peak torque and joint position sense among healthy and osteoporotic elderly women and investigating possible factors affecting the kyphosis degree. Twenty women were selected for 2 groups: healthy (n=10) and osteoporotic (n=10) elderly women. Bone mineral density (BMD), thoracic kyphosis degree, trunk muscles peak torque and joint position sense were measured. Differences among groups were analyzed by Student's Test T for unpaired data. Correlations between variables were performed by Pearson's coefficient correlation. The level of significance used for all comparisons was 5% (p≤0.05). We observed that the osteoporotic women demonstrated a significantly higher degree of kyphosis and lower trunk extensor muscle peak torque. Moreover, it was found that the BMD had a negative correlation with the thoracic kyphosis degree. Kyphosis degree showed a negative correlation between extensor muscle strength and joint position sense index. This study suggests that lower BMD may be associated to higher degree of kyphosis degree, lower trunk extensors muscle strength and an impaired joint position sense. It is also suggested that lower extensor muscle strength may be a factor that contributes to the increasing in kyphosis thoracic degree. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The relation of hearing loss degrees and oral stereognosis in 5-year-old children

Directory of Open Access Journals (Sweden)

Seyede Zohre Mousavi

2012-12-01

Full Text Available Background and Aim: Oral stereognosis is the ability to recognize the objects placed in the mouth; this plays a significant role in speech sounds production. Since the children with hearing loss have articulation disorders, this study aimed to clear the relation of hearing loss degrees and oral stereognosis in 5-year-old children.Methods: In this cross-sectional non-invasive study, 40 children of 5-year-old (30 children with different degrees of hearing loss and 10 normal children were involved. Oral steriognostic test was done for all of them and the Mann-Whitney U was used for statistical analysis.Results: There were significant differences between the mean of oral stereognostic ability between the normal children and the children with severe (p<0.01 or profound hearing loss (p=0.05. There was no significant difference between the mean of oral stereognostic ability among the children with moderate, severe and profound hearing loss compared with together. Besides, there was no significant difference between the mean of the time of diagnosis among all of hearing loss and normal children.Conclusion: The study shows that the children with moderate, severe and profound hearing loss have inefficient oral stereognosis in comparison with the normal children.

Apparatus for measuring the release of fission gases and other fission products by degassing

Energy Technology Data Exchange (ETDEWEB)

Stradal, Karl Alfred

1970-10-15

In gas-cooled high-temperature reactors, the fuel is, in general, inserted in the fuel elements in the form of small particles, which are, for example, coated with pyrolytic carbon. The purpose of this coating is to keep the fission products separate from the coolant gas. The further development of these coated particles makes it necessary to check the retention capacity. One possible method of doing this is the degassing test after irradiation in the reactor. An apparatus is described below, which was developed and installed in order to measure to a higher degree of sensitivity and in serial measurements the release of fission gases and sparingly volatile fission products.

[Study of the reineta protein modifications (Brama australis), put under freezing and storage to -18 degrees C and -30 degrees C].

Science.gov (United States)

Abugoch, Lilian; Quitral, Vilma; Larraín, M Angélica; Vinagre, Julia; Kriukov, Andrei; Chávez, Gloria

2006-12-01

The objective of the present work was to study functional and thermal properties of reineta (Brama australis) frozen meat, analysed by water retention capacity (WRC), gel forming capacity (GFC), texture, emulsifying capacity and differential scanning calorimetry (DSC). For this study, reineta fillets were obtained and extracted by the same conditions, and cutted, packaged, frozen and stored at -18 degrees C and -30 degrees C for 7 months. The results obtained, showed that there were no signifficant differences in the responses to thermal treatment for all the specimens. For samples frozen at -18 degrees C and -30 degrees C, the protein contents were 23.5 + 0.0 and 25.4 + 1.0%, respectively. The WRC values were 0.45 + 0.1 and 1.59 +/- 0.0 g water/g protein, respectively. The gel forming capacity was only present in the fresh samples, whereas the frozen stored ones only form protein aggregates. The emulsifying capacity was between 960 and 1400 g oil / g protein, and the storage time increased this value. The miosin denaturation temperature (Td) and denaturation enthalpy (?H), obtained by DSC, fluctuated between 39.2 +/- 0.5 to 44.8 +/- 0.8 degrees C and 1.12 +/- 0.3 to 0.52 +/- 0.2 J/g, respectively. The actina values were between 71.0 +/- 0.6 to 75.3 +/- 0.5 degrees C and between 0.5 +/- 0.1 to 0.7 +/- 0.1 J/g. Cooperativity decreased as the storage time increased. This is showing a certain degree of protein displacement. The values found by thermal analyses showed a direct relationship with the functional properties, both decreasing with storage time.

Developing 360 degree feedback system for KINS

Energy Technology Data Exchange (ETDEWEB)

Han, In Soo; Cheon, B. M.; Kim, T. H.; Ryu, J. H. [Chungman National Univ., Daejeon (Korea, Republic of)

2003-12-15

This project aims to investigate the feasibility of a 360 degree feedback systems for KINS and to design guiding rules and structures in implementing that systems. Literature survey, environmental analysis and questionnaire survey were made to ensure that 360 degree feedback is the right tool to improve performance in KINS. That review leads to conclusion that more readiness and careful feasibility review are needed before implementation of 360 degree feedback in KINS. Further the project suggests some guiding rules that can be helpful for successful implementation of that system in KINS. Those include : start with development, experiment with one department, tie it to a clear organization's goal, train everyone involve, make sure to try that system in an atmosphere of trust.

Developing 360 degree feedback system for KINS

International Nuclear Information System (INIS)

Han, In Soo; Cheon, B. M.; Kim, T. H.; Ryu, J. H.

2003-12-01

This project aims to investigate the feasibility of a 360 degree feedback systems for KINS and to design guiding rules and structures in implementing that systems. Literature survey, environmental analysis and questionnaire survey were made to ensure that 360 degree feedback is the right tool to improve performance in KINS. That review leads to conclusion that more readiness and careful feasibility review are needed before implementation of 360 degree feedback in KINS. Further the project suggests some guiding rules that can be helpful for successful implementation of that system in KINS. Those include : start with development, experiment with one department, tie it to a clear organization's goal, train everyone involve, make sure to try that system in an atmosphere of trust

Copula-based modeling of degree-correlated networks

International Nuclear Information System (INIS)

Raschke, Mathias; Schläpfer, Markus; Trantopoulos, Konstantinos

2014-01-01

Dynamical processes on complex networks such as information exchange, innovation diffusion, cascades in financial networks or epidemic spreading are highly affected by their underlying topologies as characterized by, for instance, degree–degree correlations. Here, we introduce the concept of copulas in order to generate random networks with an arbitrary degree distribution and a rich a priori degree–degree correlation (or ‘association’) structure. The accuracy of the proposed formalism and corresponding algorithm is numerically confirmed, while the method is tested on a real-world network of yeast protein–protein interactions. The derived network ensembles can be systematically deployed as proper null models, in order to unfold the complex interplay between the topology of real-world networks and the dynamics on top of them. (paper)

Radiation protection enrollments and degrees, 1979 and 1980

International Nuclear Information System (INIS)

Gove, R.M.; Little, J.R.; Shirley, D.L.

1981-07-01

Public concern over the effects of low-level radiation and other aspects of the use of nuclear energy has grown in recent years, and the demand for radiation protection has continued to increase. Radiation Protection Enrollments and Degrees presents the results of the latest survey of institutions offering degree programs in this field. Students obtaining such degrees are vital to the development of industry, medicine, research, power production, construction, and agriculture. These surveys assist state and federal governments in their search for such personnel

Bayesian mixture modeling of significant p values: A meta-analytic method to estimate the degree of contamination from H₀.

Science.gov (United States)

Gronau, Quentin Frederik; Duizer, Monique; Bakker, Marjan; Wagenmakers, Eric-Jan

2017-09-01

Publication bias and questionable research practices have long been known to corrupt the published record. One method to assess the extent of this corruption is to examine the meta-analytic collection of significant p values, the so-called p -curve (Simonsohn, Nelson, & Simmons, 2014a). Inspired by statistical research on false-discovery rates, we propose a Bayesian mixture model analysis of the p -curve. Our mixture model assumes that significant p values arise either from the null-hypothesis H ₀ (when their distribution is uniform) or from the alternative hypothesis H1 (when their distribution is accounted for by a simple parametric model). The mixture model estimates the proportion of significant results that originate from H ₀, but it also estimates the probability that each specific p value originates from H ₀. We apply our model to 2 examples. The first concerns the set of 587 significant p values for all t tests published in the 2007 volumes of Psychonomic Bulletin & Review and the Journal of Experimental Psychology: Learning, Memory, and Cognition; the mixture model reveals that p values higher than about .005 are more likely to stem from H ₀ than from H ₁. The second example concerns 159 significant p values from studies on social priming and 130 from yoked control studies. The results from the yoked controls confirm the findings from the first example, whereas the results from the social priming studies are difficult to interpret because they are sensitive to the prior specification. To maximize accessibility, we provide a web application that allows researchers to apply the mixture model to any set of significant p values. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Isokinetic and isometric strength-endurance after 6 hours of immersion and 6 degrees head-down tilt in men

Science.gov (United States)

Shaffer-Bailey, M.; Greenleaf, J. E.; Hutchinson, T. M.

1996-01-01

PURPOSE: To determine weight (water) loss levels for onset of muscular strength and endurance changes during deconditioning. METHODS: Seven men (27-40 yr) performed maximal shoulder-, knee-, and ankle-joint isometric (0 degree.s(-1) load) and isokinetic (60 degrees, 120 degrees, 180 degrees.s(-1) velocity) exercise tests during ambulatory control (AC), after 6 h of 6 degrees head-down tilt (HDT; dry-bulb temp. = 23.2 +/- SD 0.6 degrees C, relative humidity = 31.1+/- 11.1%) and after 6 h of 80 degrees foot-down head-out water immersion (WI; water temp. = 35.0 +/- SD 0.1 degree C) treatments. RESULTS: Weight (water) loss after HDT (1.10 +/- SE 0.14 kg, 1.4 +/- 0.2% body wt) and WI (1.54+/- 0.19 kg, 2.0 +/- 0.2% body wt) were not different, but urinary excretion with WI (1,354 +/- 142 ml.6 h(-1)) was 28% greater (p strength was unchanged except for three knee-joint peak torques: AC torque (120 degrees.s(-1), 285 +/- 20 Nm) decreased to 268 +/- 21 Nm (delta = -6%, p strength and endurance decrements is more than 2% body weight (water) loss, while significant reduction in knee-joint muscular strength-endurance occurred only at moderate (120 degrees.s(-1) and lighter (180 degrees.s(-1)) loads with body weight loss of 1.4-2.0% following WI or HDT, respectively. These weight (water) losses and knee-joint strength decrements are somewhat less than the mean weight loss of 2.6% and knee-joint strength decrements of 6-20% of American astronauts after Skylab flights to 84 d.

Gamma power and cognition in patients with schizophrenia and their first-degree relatives.

Science.gov (United States)

Díez, Álvaro; Suazo, Vanessa; Casado, Pilar; Martín-Loeches, Manuel; Molina, Vicente

2014-01-01

Gamma oscillations are essential for functional neural assembly formation underlying higher cerebral functions. Previous studies concerning gamma band power in schizophrenia have yielded diverse results. In this study, we assessed gamma band power in minimally treated patients with schizophrenia, their first-degree relatives and healthy controls during an oddball paradigm performance, as well as the relation between gamma power and cognitive performance. We found a higher gamma power in the patient group than in the healthy controls at the P3, P4, Fz, Pz and T5 sites. Compared with their relatives, gamma power in the patients was only marginally higher over P3 and P4. We found a nearly significant inverse association between gamma power at F4 and Tower of London performance in the patients, as well as a significant inverse association between gamma power at T5 and verbal memory and working memory scores in the relatives. These results support higher total gamma power in association with schizophrenia and its inverse association with cognitive performance in patients and their first-degree relatives.

Novel electrochemical method for the characterization of the degree of chirality in chiral polyaniline.

Science.gov (United States)

Feng, Zhang; Li, Ma; Yan, Yang; Jihai, Tang; Xiao, Li; Wanglin, Li

2013-01-01

A novel method to indicate the degree of chirality in polyaniline (PANI) was developed. The (D-camphorsulfonic acid)- and (HCl)-PANI-based electrodes exhibited significantly different electrochemical performances in D- and L-Alanine (Ala) aqueous solution, respectively, which can be used for the characterization the optical activity of chiral PANI. Cyclic voltammogram, tafel, and open circuit potential of PANI-based electrodes were measured within D- and L-Ala electrolyte solution, respectively. The open circuit potentials under different reacting conditions were analyzed by Doblhofer model formula, in which [C(+)](poly1)/[C(+)](poly2) was used as a parameter to characterize the degree of chirality in chiral PANI. The results showed that [C(+)](poly1)/[C(+)](poly2) can be increased with increasing concentrations of (1S)-(+)- and (1R)-(-)-10-camphorsulfonic acid. In addition, we detected that appropriate response time and lower temperature are necessary to improve the degree of chirality. Copyright © 2012 Wiley Periodicals, Inc.

Health Physics Enrollments and Degrees Survey, 2006 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2007-01-01

This annual survey collects 2006 data on the number of health physics degrees awarded as well as the number of students enrolled in health physics academic programs. Thirty universities offer health physics degrees; all responded to the survey

Geometric evolution of complex networks with degree correlations

Science.gov (United States)

Murphy, Charles; Allard, Antoine; Laurence, Edward; St-Onge, Guillaume; Dubé, Louis J.

2018-03-01

We present a general class of geometric network growth mechanisms by homogeneous attachment in which the links created at a given time t are distributed homogeneously between a new node and the existing nodes selected uniformly. This is achieved by creating links between nodes uniformly distributed in a homogeneous metric space according to a Fermi-Dirac connection probability with inverse temperature β and general time-dependent chemical potential μ (t ) . The chemical potential limits the spatial extent of newly created links. Using a hidden variable framework, we obtain an analytical expression for the degree sequence and show that μ (t ) can be fixed to yield any given degree distributions, including a scale-free degree distribution. Additionally, we find that depending on the order in which nodes appear in the network—its history—the degree-degree correlations can be tuned to be assortative or disassortative. The effect of the geometry on the structure is investigated through the average clustering coefficient 〈c 〉 . In the thermodynamic limit, we identify a phase transition between a random regime where 〈c 〉→0 when β 0 when β >βc .

The determination of light elements in heavy matrix using proton induced X-ray emission

International Nuclear Information System (INIS)

Levenets, V.V.; Omel'nik, A.P.; Shchur, A.A.; Chernov, A.E.; Usikov, N.P.; Zats, A.V.

2007-01-01

In this report the possibility of determination of light impurities in heavy matrixes is studied using proton induced X-Ray emission. The wide-band X-ray emission filter made from pyrolytic graphite was used in spectrometric scheme of experiment. The results of studying of filter features in energy range of X-ray emission from 4 to 12 keV were presented. The possibilities were examined of application of pyrolytic graphite filter to modify the X-rays spectrum for determination of iron, using characteristic emission of K-series, and hafnium, using L-series, in substances on base of zirconium (glasses, alloys etc.). It was shown, that the using of similar filter allows to reach the significant improving of metrological characteristics of analysis of mentioned impurities: the limits of detection of iron and hafnium were lowered single-order of magnitude. (authors)

Formation of the reduced form of furaneol® (2,5-dimethyl-4-hydroxy-tetrahydrofuran-3-one) during the Maillard reaction through catalysis of amino acid metal salts.

Science.gov (United States)

Nashalian, Ossanna; Wang, Xi; Yaylayan, Varoujan A

2016-11-01

Under pyrolytic conditions the acidity/basicity of Maillard reaction mixtures can be controlled through the use of hydrochloride or sodium salts of amino acids to generate a diversity of products. When the degradation of glucose was studied under pyrolytic conditions using excess sodium glycinate the reaction was found to generate a major unknown peak having a molecular ion at m/z 130. Subsequent in-depth isotope labelling studies indicated that acetol was an important precursor of this compound under pyrolytic and aqueous heating conditions. The dimerisation and cyclisation of acetol into 2,5-dimethyl-4-hydroxy-tetrahydrofuran-3-one was found to be catalysed by amino acid metal salts. Also, ESI/qTOF/MS studies indicated that the unknown peak has expected molecular formula of C6H10O3. Finally, a peak having the same retention time and mass spectrum was also generated pyrolytically when furaneol® was reduced with NaBH4 confirming the initial hypothesis regarding the unknown peak to be the reduced form of furaneol®. Copyright © 2016 Elsevier Ltd. All rights reserved.

Most probable degree distribution at fixed structural entropy

Indian Academy of Sciences (India)

Here we derive the most probable degree distribution emerging ... the structural entropy of power-law networks is an increasing function of the expo- .... tition function Z of the network as the sum over all degree distributions, with given energy.

Education evolution: a historical perspective of associate degree nursing.

Science.gov (United States)

Orsolini-Hain, Liana; Waters, Verle

2009-05-01

Exploring the inception and growth of associate degree nursing education informs our understanding of what led to such explosive growth so that most of the nursing workforce is currently educated at the associate degree level. The success of associate degree nursing programs led to many divisive years in nursing education of differentiation of practice debates that were hardly productive. Work world practices and patient needs are creating pressures on community colleges to join forces with universities to increase the percentage of baccalaureate-educated nurses. Associate degree nursing education continues to evolve to meet the demands of a higher educated nursing workforce.

Astronomy Degree Recipients Initial Employment: Results from the Follow-Up Survey of Degree Recipients, Classes of 2010, 2011 and 2012 Combined. Focus On

Science.gov (United States)

Pold, Jack; Mulvey, Patrick

2015-01-01

Each fall the Statistical Research Center (SRC) conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the US to provide information concerning the numbers of students they have enrolled and counts of recent degree recipients. In connection with this survey, SRC asks for the names and…

Astronomy Degree Recipients: Initial Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2007, 2008 and 2009. Focus On

Science.gov (United States)

Mulvey, Patrick; Shindel, Brandon

2011-01-01

Each fall the Statistical Research Center conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the US to provide information concerning the numbers of students they have enrolled and counts of recent degree recipients. In connection with this survey, the authors ask for the names and…

Factors motivating Latino college students to pursue STEM degrees on CSU campuses in the southern San Joaquin Valley

Science.gov (United States)

Ramirez, Gabriel

The purpose of this study was to determine what factors were motivating Latino/a students in the southern San Joaquin Valley to pursue STEM degrees and whether these factors were specific to the Latino/a culture. A 12-question survey was administered to STEM majors at California State University, Bakersfield and California State University, Fresno and interviews were conducted with those survey respondents who agreed to be part of the process. The results of the survey suggested that factors such as STEM subject matter, STEM career knowledge, the possibility of a high paying salary, high school STEM grades, and family influence were significant in motivating Latino/a students to pursue STEM degrees. The results of the Chi Square Test suggested the Latino/a students' responses about college STEM degree granting statistics, the possibility of a high salary, and the effects of setbacks were significantly different to those of their non-Latino/a counterparts.

Study of wavefront aberration in DR patients with different degree of dry eye

Directory of Open Access Journals (Sweden)

Jin-Ran Fang

2018-05-01

Full Text Available AIM: To compare the changes of wavefront aberrations in patients with diabetic retinopathy(DRand with different degrees of dry eye and to explore the reasons of visual quality decline in them. METHODS: We randomly selected 40 eyes in our hospital for treatment with DR and varying degrees of dry eye, and 40 eyes of normal control group. Topcon KR-1W visual quality analyzer was used to record the mean square the total high order corneal aberration, spherical aberration, comatic aberration and trefoil aberration of cornea with pupil diameters of 4mm and 6mm. Analysis of variance were used to compare the wavefront aberrations and the aberration values in the control group and in patients with diabetic retinopathy and with different degrees of dry eye. RESULTS: For 4mm and 6mm pupil diameters, nondiabetic retinopathy(NDRwith dry eye group, the nonproliferative diabetic retinopathy(NPDRwith dry eye group and proliferative diabetic retinopathy(PDRdry eye group had significantly increased tHOA, coma and trefoil compared with the contrast group(PPCONCLUSION: Dry eye of diabetic retinopathy with different degrees is closely related to the increase of wavefront aberration. Increased wavefront aberration may be one of the reasons to reduced visual quality in patients with diabetic retinopathy and with dry eye, and provide the basis for the decline of visual function of diabetic patients with dry eye.

The impacts of a 4 Degree C world on Sustainable Development

Science.gov (United States)

Bierbaum, R. M.; Schellnhuber, H.

2012-12-01

Climate change already poses a serious and immediate threat to development. There are many other urgent challenges, but developing countries cannot afford to ignore climate change since it interacts with many of these other challenges, such as availability of food, water, energy, and shelter, and it make protecting people from floods, droughts, and disease outbreaks more difficult. Confronting climate change requires both mitigation--to avoid the unmanageable, and adaptation--to manage the unavoidable. A 4 degree C world will tax the ability of systems to adapt. There will be significant disruption in multiple sectors, and likely, the large-scale displacement of human populations. The reduction in the resilience of natural and managed ecosystems will impact the resilience of socio-economic systems around the world. A 4 degree C world could increase vulnerability to other global non-climatic stressors and shocks, such as emerging pandemics, trade disruptions or financial market shocks. Developing countries will be the hardest hit, and their prospects for sustainable development compromised.

Perspectives of Nurses Pursuing Doctoral Degrees in Georgia: Implications for Recruitment.

Science.gov (United States)

Wheeler, Rebecca McCombs; Eichelberger, Lisa Wright

2017-08-01

Increasing the number of nurses with doctorates is a goal of the nursing profession. The Georgia Nursing Leadership Coalition developed a survey to understand the perspectives of nurses pursuing doctoral degrees in Georgia to improve recruitment and retention strategies. A 26-item online survey was distributed to all students enrolled in Georgia-based doctoral programs in nursing in spring 2014. One hundred fifty responses were received (54% response rate). Most students first seriously considered doctoral education during their master's programs or more than 5 years into practice. For most, obtaining a doctoral degree was a personal life goal. Work-life balance was the most significant barrier. Recruitment of nurses to doctoral programs should focus on messaging, timing, and highlighting the unique aspects of programs. Schools should work to reduce barriers. Understanding students' perspectives of doctoral education in nursing can improve recruitment strategies and increase the number of nurses graduating with doctorates in Georgia. [J Nurs Educ. 2017;56(8):466-470.]. Copyright 2017, SLACK Incorporated.

Independence, Odd Girth, and Average Degree

DEFF Research Database (Denmark)

Löwenstein, Christian; Pedersen, Anders Sune; Rautenbach, Dieter

2011-01-01

  We prove several tight lower bounds in terms of the order and the average degree for the independence number of graphs that are connected and/or satisfy some odd girth condition. Our main result is the extension of a lower bound for the independence number of triangle-free graphs of maximum...... degree at most three due to Heckman and Thomas [Discrete Math 233 (2001), 233–237] to arbitrary triangle-free graphs. For connected triangle-free graphs of order n and size m, our result implies the existence of an independent set of order at least (4n−m−1) / 7.  ...

Mixed-Degree Spherical Simplex-Radial Cubature Kalman Filter

Directory of Open Access Journals (Sweden)

Shiyuan Wang

2017-01-01

Full Text Available Conventional low degree spherical simplex-radial cubature Kalman filters often generate low filtering accuracy or even diverge for handling highly nonlinear systems. The high-degree Kalman filters can improve filtering accuracy at the cost of increasing computational complexity; nevertheless their stability will be influenced by the negative weights existing in the high-dimensional systems. To efficiently improve filtering accuracy and stability, a novel mixed-degree spherical simplex-radial cubature Kalman filter (MSSRCKF is proposed in this paper. The accuracy analysis shows that the true posterior mean and covariance calculated by the proposed MSSRCKF can agree accurately with the third-order moment and the second-order moment, respectively. Simulation results show that, in comparison with the conventional spherical simplex-radial cubature Kalman filters that are based on the same degrees, the proposed MSSRCKF can perform superior results from the aspects of filtering accuracy and computational complexity.

Are UK undergraduate Forensic Science degrees fit for purpose?

Science.gov (United States)

Welsh, Charles; Hannis, Marc

2011-09-01

In October 2009 Skills for Justice published the social research paper 'Fit for purpose?: Research into the provision of Forensic Science degree programmes in UK Higher Education Institutions.' The research engaged employers representing 95% of UK Forensic Science providers and 79% of UK universities offering Forensic Science or Crime Scene degree programmes. In addition to this, the research collected the views of 430 students studying these degrees. In 2008 there were approximately 9000 people working in the Forensic Science sector in the UK. The research found that the numbers of students studying Forensic Science or Crime Scene degrees in the UK have more than doubled since 2002-03, from 2191 in to 5664 in 2007-08. Over the same period there were twice as many females as males studying for these degrees. The research concluded that Forensic Science degree programmes offered by UK universities were of a good quality and they provided the student with a positive learning experience but the content was not relevant for Forensic Science employers. This echoed similar research by the former Government Department for Innovation, Universities and Skills on graduates from wider science, technology, engineering and mathematics degree programmes. The research also found that 75% of students studying Forensic Science or Crime Scene degrees expected to have a career in the Forensic Science sector, meaning that ensuring these courses are relevant for employers is a key challenge for universities. This paper reflects on the original research and discusses the implications in light of recent government policy. Copyright © 2011 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Characteristic of 120 degree C thermoluminescence peak of iceland spar

International Nuclear Information System (INIS)

Lu Xinwei; Han Jia

2006-01-01

The basic characteristic of 120 degree C thermoluminescence peak of iceland spar was studied. The experimental result indicates the longevity of 120 degree C thermoluminescence peak of iceland spar is about 2 h under 30 degree C. The thermoluminescence peak moves to the high temperature when the heating speed increasing. The intensity of 120 degree C thermoluminescence peak of iceland spar is directly proportional to radiation dose under 15 Gy. (authors)

Degree of conversion and surface hardness of resin cement cured with different curing units.

Science.gov (United States)

Ozturk, Nilgun; Usumez, Aslihan; Usumez, Serdar; Ozturk, Bora

2005-01-01

The aim of this study was to evaluate the degree of conversion and Vickers surface hardness of resin cement under a simulated ceramic restoration with 3 different curing units: a conventional halogen unit, a high-intensity halogen unit, and a light-emitting diode system. A conventional halogen curing unit (Hilux 550) (40 s), a high-intensity halogen curing unit used in conventional and ramp mode (Optilux 501) (10 s and 20 s, respectively), and a light-emitting diode system (Elipar FreeLight) (20 s, 40 s) were used in this study. The dual-curing resin cement (Variolink II) was cured under a simulated ceramic restoration (diameter 5 mm, height 2 mm), and the degree of conversion and Vickers surface hardness were measured. For degree of conversion measurement, 10 specimens were prepared for each group. The absorbance peaks were recorded using the diffuse-reflection mode of Fourier transformation infrared spectroscopy. For Vickers surface hardness measurement, 10 specimens were prepared for each group. A load of 200 N was applied for 15 seconds, and 3 evaluations of each of the samples were performed. Degree of conversion achieved with Optilux 501 (20 s) was significantly higher than those of Hilux, Optilux 501 (10 s), Elipar FreeLight (20 s), and Elipar FreeLight (40 s). For Vickers surface hardness measurement, Optilux 501 (20 s) produced the highest surface hardness value. No significant differences were found among the Hilux, Optilux 501 (10 s), Elipar FreeLight (20 s), and Elipar FreeLight (40 s). The high-intensity halogen curing unit used in ramp mode (20 s) produced harder resin cement surfaces than did the conventional halogen curing unit, high-intensity halogen curing unit used in conventional mode (10 s) and light-emitting diode system (20 s, 40 s), when cured through a simulated ceramic restoration.

The relationship between cerebral infarction on MR and angiographic findings in moyamoya disease: significance of the posterior circulation

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun Ja; Song, Soon Young [College of Medicine, Kwangdong Univ., Koyang (Korea, Republic of); Yu, Won Jong; Jung, So Lyung; Chung, Bong Gak; Kag, Si Won [College of Medicine, The Catholic Univ. of Korea, Seoul (Korea, Republic of); Kim, Man Deuk [College of Medicine, Pochon CHA Univ., Pochon (Korea, Republic of)

2002-06-01

To investigate the relationship between changes in the posterior and anterior circulation, as seen at angiography, and the frequency and extent of cerebral infarction revealed by MR imaging in moyamoya disease. This study involved 34 patients (22 females and 12 males, aged 2-52 years) in whom cerebral angiography revealed the presence of moyamoya disease (bilateral; unilateral= 24:10; total hemispheres=58) and who also underwent brain MR imaging. To evaluate the angiographic findings, we applied each angiographic staging system to the anterior and posterior circulation. Leptomeningeal collateral circulation from the cortical branches of the posterior cerebral artery (PCA) was also assigned one of four grades. At MR imaging, areas of cerebral cortical or subcortical infarction in the hemisphere were divided into six zones. White matter and basal ganglionic infarction, ventricular dilatation, cortical atrophy, and hemorrhagic lesions were also evaluated. To demonstrate the statistical significance of the relationship between the angiographic and the MR findings, both the Mantel-Haenszel chi-square test for trend and the chi-square test were used. The degree of steno-occlusive PCA change correlated significantly with the internal carotid artery (ICA) stage (p<0.0001). As PCA stages advanced, the degree of leptomeningeal collaterals from the PCA decreased significantly (P<0.0001), but ICA stages were not significant (p>0.05). The prevalence of infarction showed significant correlation with the degree of steno-occlusive change in both the ICA and PCA. The degree of cerebral ischemia in moyamoya patients increased proportionally with the severity of PCA stenosis rather than with that of steno-occlusive lesins of the anterior circulation. Infarctions tended to be distributed in the anterior part of the hemisphere at PCA state I or II, while in more advanced PCA lesions, they were also found posteriorly, especially in the territories of the posterior middle cerebral artery

Effect of Zn/ZSM-5 and FePO4 Catalysts on Cellulose Pyrolysis

Directory of Open Access Journals (Sweden)

Haian Xia

2015-01-01

Full Text Available A series of Zn/ZSM-5 catalysts with different Zn contents and FePO4 were used to pyrolyze cellulose to produce value added chemicals. The nature of these catalysts was characterized by ammonia-temperature programmed desorption (NH3-TPD, IR spectroscopy of pyridine adsorption, and X-ray diffraction (XRD techniques. Noncatalytic and catalytic pyrolytic behaviors of cellulose were studied by thermogravimetric (TG technique. The pyrolytic liquid products, that is, the biooils, were analyzed by gas chromatography-mass spectrometry (GC-MS. The major components of the biooils are anhydrosugars such as levoglucosan (LGA, 1,6-anhydro-β-D-glucofuranose (AGF, levoglucosenone (LGO, 1,6-anhydro-3,4-dideoxy-β-D-pyranosen-2-one, and 1,4:3,6-dianhydro-α-D-glucopyranose (DGP, as well as furan derivatives, alcohols, and so forth. Zn/ZSM-5 samples with Brønsted and Lewis acid sites and the FePO4 catalyst with Lewis acid sites were found to have a significant effect on the pyrolytic behaviors of cellulose and product distribution. These results show that Brønsted and Lewis acid sites modified remarkably components of the biooil, which could promote the production of furan compounds and LGO. On the basis of the findings, a model was proposed to describe the pyrolysis pathways of cellulose catalyzed by the solid acid catalysts.

On the Nonlinear Structural Analysis of Wind Turbine Blades using Reduced Degree-of-Freedom Models

DEFF Research Database (Denmark)

Holm-Jørgensen, Kristian; Larsen, Jesper Winther; Nielsen, Søren R.K.

2008-01-01

, modelling geometrical and inertial nonlinear couplings in the fundamental flap and edge direction. The purpose of this article is to examine the applicability of such a reduced-degree-of-freedom model in predicting the nonlinear response and stability of a blade by comparison to a full model based...... on a nonlinear co-rotating FE formulation. By use of the reduced-degree-of-freedom model it is shown that under strong resonance excitation of the fundamental flap or edge modes, significant energy is transferred to higher modes due to parametric or nonlinear coupling terms, which influence the response...... of the small number of included modes. The qualitative erratic response and stability prediction of the reduced order models take place at frequencies slightly above normal operation. However, for normal operation of the wind turbine without resonance excitation 4 modes in the reduced-degree-of-freedom model...

Quality of life is significantly impaired in non-allergic rhinitis patients

NARCIS (Netherlands)

Segboer, Christine L.; Terreehorst, Ingrid; Gevorgyan, Artur; Hellings, Peter W.; van Drunen, Cornelis M.; Fokkens, Wytske J.

2017-01-01

In contrast to the well-known significant impairment of quality of life (QoL) in allergic rhinitis (AR), the degree of impairment in QoL in non-allergic rhinitis (NAR) remained unknown for a long time, due to a lack of a validated questionnaire to assess QoL in the NAR patient group. In this study a

A unique degree program for pre-pharmacy education: An undergraduate degree in pharmaceutical sciences.

Science.gov (United States)

Jafari, Mahtab

2018-02-01

Within the coming decade, the demand for well-trained pharmacists is expected to only increase, especially with the aging of the United States (US) population. To help fill this growing demand, the University of California, Irvine (UCI) aims to offer a unique pre-pharmacy degree program and has developed a Bachelor of Science (BS) degree in Pharmaceutical Sciences to help achieve this goal. In this commentary, we share our experience with our curriculum and highlight its features in an effort to encourage other institutions to enhance the learning experience of their pre-pharmacy students. The efforts of the UCI Department of Pharmaceutical Sciences has resulted in UCI being consistently ranked as one of the top feeder institutions by the Pharmacy College Application Service (PharmCAS) in recent years. The UCI Pharmaceutical Sciences Bachelor of Science offers a unique pre-pharmacy educational experience in an effort to better prepare undergraduates for the rigors of the doctorate of pharmacy curriculum. Copyright © 2017. Published by Elsevier Inc.

Effect of high surface area activated carbon on thermal degradation of jet fuel

Energy Technology Data Exchange (ETDEWEB)

Gergova, K.; Eser, S.; Arumugam, R.; Schobert, H.H. [Pennsylvania State Univ., University Park, PA (United States)

1995-05-01

Different solid carbons added to jet fuel during thermal stressing cause substantial changes in pyrolytic degradation reactions. Activated carbons, especially high surface area activated carbons were found to be very effective in suppressing solid deposition on metal reactor walls during stressing at high temperatures (425 and 450{degrees}C). The high surface area activated carbon PX-21 prevented solid deposition on reactor walls even after 5h at 450{degrees}C. The differences seen in the liquid product composition when activated carbon is added indicated that the carbon surfaces affect the degradation reactions. Thermal stressing experiments were carried out on commercial petroleum-derived JPTS jet fuel. We also used n-octane and n-dodecane as model compounds in order to simplify the study of the chemical changes which take place upon activated carbon addition. In separate experiments, the presence of a hydrogen donor, decalin, together with PX-21 was also studied.

Population equations for degree-heterogenous neural networks

Science.gov (United States)

Kähne, M.; Sokolov, I. M.; Rüdiger, S.

2017-11-01

We develop a statistical framework for studying recurrent networks with broad distributions of the number of synaptic links per neuron. We treat each group of neurons with equal input degree as one population and derive a system of equations determining the population-averaged firing rates. The derivation rests on an assumption of a large number of neurons and, additionally, an assumption of a large number of synapses per neuron. For the case of binary neurons, analytical solutions can be constructed, which correspond to steps in the activity versus degree space. We apply this theory to networks with degree-correlated topology and show that complex, multi-stable regimes can result for increasing correlations. Our work is motivated by the recent finding of subnetworks of highly active neurons and the fact that these neurons tend to be connected to each other with higher probability.

Linear analysis of degree correlations in complex networks

Indian Academy of Sciences (India)

Many real-world networks such as the protein–protein interaction networks and metabolic networks often display nontrivial correlations between degrees of vertices connected by edges. Here, we analyse the statistical methods used usually to describe the degree correlation in the networks, and analytically give linear ...

Clinical significance of quantitative analysis of facial nerve enhancement on MRI in Bell's palsy.

Science.gov (United States)

Song, Mee Hyun; Kim, Jinna; Jeon, Ju Hyun; Cho, Chang Il; Yoo, Eun Hye; Lee, Won-Sang; Lee, Ho-Ki

2008-11-01

Quantitative analysis of the facial nerve on the lesion side as well as the normal side, which allowed for more accurate measurement of facial nerve enhancement in patients with facial palsy, showed statistically significant correlation with the initial severity of facial nerve inflammation, although little prognostic significance was shown. This study investigated the clinical significance of quantitative measurement of facial nerve enhancement in patients with Bell's palsy by analyzing the enhancement pattern and correlating MRI findings with initial severity of facial palsy and clinical outcome. Facial nerve enhancement was measured quantitatively by using the region of interest on pre- and postcontrast T1-weighted images in 44 patients diagnosed with Bell's palsy. The signal intensity increase on the lesion side was first compared with that of the contralateral side and then correlated with the initial degree of facial palsy and prognosis. The lesion side showed significantly higher signal intensity increase compared with the normal side in all of the segments except for the mastoid segment. Signal intensity increase at the internal auditory canal and labyrinthine segments showed correlation with the initial degree of facial palsy but no significant difference was found between different prognostic groups.

Bouguer gravity anomaly and isostatic residual gravity maps of the Tonopah 1 degree by 2 degrees Quadrangle, central Nevada

Science.gov (United States)

Plouff, Donald

1992-01-01

These gravity maps are part of a folio of maps of the Tonopah 1 degree by 2 degrees quadrangle, Nevada, prepared under the Conterminous United States Mineral Assessment Program. Each product of the folio is designated by a different letter symbol, starting with A, in the MF-1877 folio. The quadrangle encompasses an area of about 19,500 km2  in the west central part of Nevada.

Clinical significance of changes of serum expression of IGF-I in patients with astrocytoma

International Nuclear Information System (INIS)

Liu Jianbo; Ding Dongmei; Yang Fubing

2005-01-01

Objective: To investigate the serum expression of IGF-I in patients with astrocytoma of different degrees of malignancy as well as the changes of levels after operative removal of the tumor. Methods: Serum IGF-I contents were measured with IRMA in 16 patients with Grade I-II astrocytoma and 14 patients with Grade III-IV astrocytoma both before and after operation as well as in 30 controls. Results: The serum contents of IGF-I in both groups of patients were significantly higher than those in controls (P<0.05). The levels in Grade III-IV patients were significantly higher than those in Grade I-II patients (P < 0.05 ). After operation, the levels dropped significantly (vs before operation, P<0.05). Conclusion: The serum contents of IGF - I in patients with astrocytoma were positively correlated with the degree of malignancy. Post-operative decrease of IGF-I contents was related to the decrease of tumor burden. (authors)

Constrained multi-degree reduction with respect to Jacobi norms

KAUST Repository

Ait-Haddou, Rachid; Barton, Michael

2015-01-01

We show that a weighted least squares approximation of Bézier coefficients with factored Hahn weights provides the best constrained polynomial degree reduction with respect to the Jacobi L2L2-norm. This result affords generalizations to many previous findings in the field of polynomial degree reduction. A solution method to the constrained multi-degree reduction with respect to the Jacobi L2L2-norm is presented.

Constrained multi-degree reduction with respect to Jacobi norms

KAUST Repository

Ait-Haddou, Rachid

2015-12-31

We show that a weighted least squares approximation of Bézier coefficients with factored Hahn weights provides the best constrained polynomial degree reduction with respect to the Jacobi L2L2-norm. This result affords generalizations to many previous findings in the field of polynomial degree reduction. A solution method to the constrained multi-degree reduction with respect to the Jacobi L2L2-norm is presented.

Relation of the Vector Force Needed to Lift the Upper Eyelids and the Degree of Exophthalmos.

Science.gov (United States)

Hwang, Kun; Kim, Joo Ho; Kim, Hun; Hwang, Se Won

2015-07-01

The aim of this study was to determine the relation of the vector force needed to lift the upper eyelids and the degree of exophthalmos (EX). In the 109 magnetic resonance imaging films, the degree of EX (the shortest distance from the cornea to the line connecting both lateral orbital rims), the anterior angle (θ, an angle formed from the lower margin of the upper eyelid-superior transverse ligament (STL)--with a parallel line connecting the supraorbital rim and the infraorbital rim in the sagittal film), the length from the STL to the upper eyelid margin (levator length [LL]), the thickness of the STL (WT), and the thickness the of levator palpebrae (LT) were measured.The average EX was 14.5 ± 2.35  mm. The average θ was 33.84 ± 2.15 degrees. The vector force needed to lift the upper eyelids (cos θ) was 0.83. The average LL was 21.0 ± 1.54  mm. The average WT was 1.07 ± 0.22  mm. The average LT was 1.69 ± 0.30  mm. There was a significant positive relationship between the EX and age (P = 0.022). The EX in those younger than 20 years (12.8 ± 2.06) was significantly lesser than that of the other age groups. There was no significant relationship between the EX and cos θ. However, there was a significant positive relationship between the EX and the LL. There was a significant positive relationship between LL and LT, and between LL and WT.The farther the eyeball protrudes, the longer the LL is needed. The longer the LL is, the thicker the levator muscle and STL.

Assessment of Aliasing Errors in Low-Degree Coefficients Inferred from GPS Data

Directory of Open Access Journals (Sweden)

Na Wei

2016-05-01

Full Text Available With sparse and uneven site distribution, Global Positioning System (GPS data is just barely able to infer low-degree coefficients in the surface mass field. The unresolved higher-degree coefficients turn out to introduce aliasing errors into the estimates of low-degree coefficients. To reduce the aliasing errors, the optimal truncation degree should be employed. Using surface displacements simulated from loading models, we theoretically prove that the optimal truncation degree should be degree 6–7 for a GPS inversion and degree 20 for combing GPS and Ocean Bottom Pressure (OBP with no additional regularization. The optimal truncation degree should be decreased to degree 4–5 for real GPS data. Additionally, we prove that a Scaled Sensitivity Matrix (SSM approach can be used to quantify the aliasing errors due to any one or any combination of unresolved higher degrees, which is beneficial to identify the major error source from among all the unresolved higher degrees. Results show that the unresolved higher degrees lower than degree 20 are the major error source for global inversion. We also theoretically prove that the SSM approach can be used to mitigate the aliasing errors in a GPS inversion, if the neglected higher degrees are well known from other sources.

Degree of Success? A Review of Delivering BSc Honours Degrees in an FE College

Science.gov (United States)

Griffiths, Colin; Lloyd, Mary Golding

2009-01-01

Widening participation initiatives led by the government encourage non-traditional students to enrol in higher education courses usually offered through a franchising arrangement between a Higher Education Institution (HEI) and a local Further Education Institution (FEI). The focus has been on the development of foundation degrees with most…

Chapter 3: Crossing Boundaries--Foundation Degrees in England

Science.gov (United States)

Longhurst, Derek

2010-01-01

This chapter traces the history, purposes, and distinctive features of the foundation degree, a short-cycle higher education qualification introduced in England in 2000-2001 and offered by both universities and further education colleges. The key characteristics of the foundation degree are discussed: employer involvement in curriculum development…

Cross-Evaluation of Degree Programmes in Higher Education

Science.gov (United States)

Kettunen, Juha

2010-01-01

Purpose: This study seeks to develop and describe the benchmarking approach of enhancement-led evaluation in higher education and to present a cross-evaluation process for degree programmes. Design/methodology/approach: The benchmarking approach produces useful information for the development of degree programmes based on self-evaluation,…

Linear analysis of degree correlations in complex networks

Indian Academy of Sciences (India)

2016-11-02

Nov 2, 2016 ... 4College of Science, Qi Lu University of Technology, Jinan 250353, Shandong, China ... cal methods used usually to describe the degree correlation in the ... Most social networks show assorta- .... a clear but only qualitative description of the degree ... is difficult to give quantitative relation between DCC.

Special Report: Top 100 Degree Producers. Part II.

Science.gov (United States)

Black Issues in Higher Education, 1999

1999-01-01

Data on the colleges and universities producing the highest numbers of minority master's, doctoral, and first professional degrees in 1996-1997 are presented. Rankings are organized by degree level, ethnic group (African American, Hispanic American, Asian American, Native American), discipline group, and overall graduation rate. Breakouts are also…

Assessing braze quality in the actively cooled Tore Supra Phase III outboard pump limiter

International Nuclear Information System (INIS)

Nygren, R.E.; Lutz, T.L.; Miller, J.D.; McGrath, R.; Dale, G.

1994-01-01

The quality of brazing of pyrolytic graphite armor brazed to copper tubes in Tore Supra's Phase III Outboard Pump Limiter was assessed through pre-service qualification testing of individual copper/tile assemblies. The evaluation used non-destructive, hot water transient heating tests performed in the high-temperature, high-pressure flow loop at Sandia's Plasma Materials Test Facility. Surface temperatures of tiles were monitored with an infrared camera as water at 120 degrees C at about 2.07 MPa (300 psi) passed through a tube assembly initially at 30 degrees C. For tiles with braze voids or cracks, the surface temperatures tagged behind those of adjacent well-bonded tiles. Temperature tags were correlated with flaw sizes observed during repairs based upon a detailed 2-D heat transfer analyses. open-quotes Badclose quotes tiles, i.e., temperature tags of 10-20 degrees C depending upon tile's size, were easy to detect and, when removed, revealed braze voids of roughly 50% of the joint area. Eleven of the 14 tubes were rebrazed after bad tiles were detected and removed. Three tubes were rebrazed twice

Georgia Power Company's college degree program

International Nuclear Information System (INIS)

Coggin, C.L.

1988-01-01

The purpose of this paper is to describe Georgia Power Company's on-site college degree program for nuclear power plant personnel. In February 1986, the US Nuclear Regulatory Commission issued a policy statement concerning engineering expertise on shift (Generic Letter 86-04), which appeared in Volume 50, Number 208 of the October 28, 1985 Federal Register. One of the options available to nuclear power plant personnel to meet the requirement was the combined senior reactor operator/shift technical adviser position. One of the methods for meeting the option included a bachelor's degree in engineering technology for an accredited institution, including course work in the physical, mathematical, or engineering sciences

Burden of volcanic dust and nuclear debris after injection into the stratosphere at 40 degree to 58 degree N

International Nuclear Information System (INIS)

Volz, F.E.

1975-01-01

Meridional profiles of turbidity at some periods after the explosion of Katmai volcano in June 1912 at 58degreeN are compared with debris burden from Chinese nuclear tests. Katmai turbidity was previously obtained from solar radiation data, and debris burden was calculated from published mixing ratio data. Turbidity and burden generally peak strongly in arctic latitudes. Only two tests show indications of a bulge at 30degree-45degreeN which probably existed for Katmai dust in spring 1913. The residence time of Katmai dust was found to have been about 1 year, whereas fallout of nuclear debris seems not to have started before the winter following the tests. For September 1912 the total amount of Katmai aerosol is estimated to have been 13 million metric tons. Analogies to predicted meridional distribution of SST pollutants are being mentioned

A degree of success? Messages from the new social work degree in England for nurse education.

Science.gov (United States)

Moriarty, Jo; Manthorpe, Jill; Stevens, Martin; Hussein, Shereen; Macintyre, Gillian; Orme, Joan; Green Lister, Pam; Sharpe, Endellion; Crisp, Beth

2010-07-01

In September 2008 the Nursing and Midwifery Council (NMC) approved plans to change pre-registration nursing education in England to an all-graduate qualification in 2015. In 2001 the Department of Health announced a similar decision for social work qualifying education and the first graduate-only qualifying programmes began in 2003-2004. This article presents findings from a national in-depth evaluation of the social work degree in England and describes ways in which efforts have been made to improve the quality of social workers, raise the status of the profession and link practice and theory as part of the transformation to a degree level qualification. Messages for nurse educators are drawn in the light of the professions' commonalities. Copyright 2009 Elsevier Ltd. All rights reserved.

Phase relations in the metal-rich portions of the phase system Pt-Ir-Fe-S at 1000 degrees C and 1100 degrees C

DEFF Research Database (Denmark)

Makovicky, E.; Karup-Møller, Sven

2000-01-01

Phase relations in the S-poor portions of the dry condensed Pt-Ir-Fe-S system were determined at 1000 degrees and 1100 degreesC with a particular emphasis on delineation of the solid solubility fields of the Pt-Ir-Fe alloys. At both temperatures, a broad field of gamma (Ir,Fe,Pt) alloy coexists...... with gamma-(Pt,Fe), Pt3Fe and PtFe which dissolve respectively at least 5.1, 29.3 and 24.0 at.% Ir at 1100 degreesC (2.2, 23.6 and less than or equal to 17.2 at.% Ir at 1000 degreesC). Gaps between the nearly Ir-free Pt-Fe alloys gamma (Pt,Fe), Pt3Fe s.s., PtFe s.s. and gamma (Fe,Pt) were estimated as 20......-23 at.%, 40-42 at.% and 54.2-similar to 57 at.% Fe at 1100 degreesC (18-23, 39.5-42.5 and 59-62 at.% Fe at 1000 degreesC). The first gap agrees with data from natural phases by Cabri et ni. (1996). The Fe-rich sulphide melt dissolves only traces of Pt and Ir; Fe1-xS dissolves up to 5.8 at.% Ir at 1100...

Probabilistic relation between In-Degree and PageRank

NARCIS (Netherlands)

Litvak, Nelli; Scheinhardt, Willem R.W.; Volkovich, Y.

2008-01-01

This paper presents a novel stochastic model that explains the relation between power laws of In-Degree and PageRank. PageRank is a popularity measure designed by Google to rank Web pages. We model the relation between PageRank and In-Degree through a stochastic equation, which is inspired by the

Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Demirbas, Ayhan [Department of Chemical Engineering, Selcuk University, Konya (Turkey)

2004-08-01

This paper describes non-catalytic pyrolysis of plastic waste materials. Three types of waste plastics were used in this study: polystyrene (PS), polyethylene (PE) and polypropylene (PP). Under pyrolysis conditions, plastic wastes can be decomposed into three fractions: gas, liquid and solid residue. The liquid products are usually composed of higher boiling point hydrocarbons. In order to obtain useful gasoline-range hydrocarbons from the pyrolytic oil, fractional distillation is preferred for product separation. More valuable chemical raw materials including benzene, toluene and other condensed aromatic hydrocarbons may be obtained by refining the pyrolytic oil. The results showed that waste PS yielded higher liquid, and waste PE and PP yielded higher gaseous products. The dominant pyrolytic liquid product of PS waste was styrene.

The impact of the degree of application of e-commerce on operational performance among Taiwans high-tech manufacturers

Directory of Open Access Journals (Sweden)

Yi-Chan Chung

2013-11-01

Full Text Available This study probes the correlation of types of operational strategy, degrees of organisational learning, types of organisational culture, the degree of the application of e-commerce, and operational performance among high-tech firms in Taiwan. The data was collected by questionnaires distributed via mail to senior supervisors at high-tech firms in six industries at three Taiwanese science parks. The results showed that a higher degree of e-commerce application leads to a significant and positive effect on operational performance. This study suggests that, in order to upgrade operational performance, firms should enhance their organisational learning and e-commerce, along with their rational, hierarchical, consensual, and developmental cultures, and the execution of prospector and defender strategies.

Food Addiction: Its Prevalence and Significant Association with Obesity in the General Population

OpenAIRE

Pedram, Pardis; Wadden, Danny; Amini, Peyvand; Gulliver, Wayne; Randell, Edward; Cahill, Farrell; Vasdev, Sudesh; Goodridge, Alan; Carter, Jacqueline C.; Zhai, Guangju; Ji, Yunqi; Sun, Guang

2013-01-01

Background ?Food addiction? shares a similar neurobiological and behavioral framework with substance addiction. However whether, and to what degree, ?food addiction? contributes to obesity in the general population is unknown. Objectives to assess 1) the prevalence of ?food addiction? in the Newfoundland population; 2) if clinical symptom counts of ?food addiction? were significantly correlated with the body composition measurements; 3) if food addicts were significantly more obese than contr...

Degree sequence in message transfer

Science.gov (United States)

Yamuna, M.

2017-11-01

Message encryption is always an issue in current communication scenario. Methods are being devised using various domains. Graphs satisfy numerous unique properties which can be used for message transfer. In this paper, I propose a message encryption method based on degree sequence of graphs.

Aerospace Technology (Aerospace Engineering Degree)

OpenAIRE

Tiseira Izaguirre, Andrés Omar; Blanco Rodríguez, David; Carreres Talens, Marcos; FAJARDO PEÑA, PABLO

2013-01-01

Apuntes de la asignatura Tecnología Aeroespacial Tiseira Izaguirre, AO.; Blanco Rodríguez, D.; Carreres Talens, M.; Fajardo Peña, P. (2013). Aerospace Technology (Aerospace Engineering Degree). Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/35263

Heat treatment of the common furniture beetle Anobium punctatum (Coleoptera: Anobiidae), at temperature between 45 degrees and 54 degrees C. under dry and humid conditions

DEFF Research Database (Denmark)

Hansen, Lise Stengaard; Jensen, Karl-Martin Vagn

1998-01-01

The combinations of exposure times and temperatures (45 degrees to 54 degrees C.) without addition of moisture necessary to obtain 100 per cent mortality were determined on all stages of commn furniture beetle, Anobium punctatum. Lethal combinations vary from minutes at 46 degrees to 5 minutes...

Global Warming Impacts on Heating and Cooling Degree-Days in the United States

Science.gov (United States)

Petri, Y.; Caldeira, K.

2014-12-01

Anthropogenic climate change is expected to significantly alter residential air conditioning and space heating requirements, which account for 41% of U.S. household energy expenditures. The degree-day method can be used for reliable estimation of weather related building energy consumption and costs, as well as outdoor climatic thermal comfort. Here, we use U.S. Climate Normals developed by NOAA based on weather station observations along with Climate Model Intercomparison Project phase 5 (CMIP5) multi-model ensemble simulations. We add the projected change in heating and cooling degree-days based on the climate models to the estimates based on the NOAA U.S. Climate Normals to project future heating and cooling degree-days. We find locations with the lowest and highest combined index of cooling (CDDs) and heating degree-days (HDDs) for the historical period (1981 - 2010) and future period (2080 - 2099) under the Representation Concentration Pathway 8.5 (RCP8.5) climate change scenario. Our results indicate that in both time frames and among the lower 48 states, coastal areas in the West and South California will have the smallest degree-day sum (CDD + HDD), and hence from a climatic perspective become the best candidates for residential real estate. The Rocky Mountains region in Wyoming, in addition to northern Minnesota and North Dakota, will have the greatest CDD + HDD. While global warming is projected to reduce the median heating and cooling demand (- 5%) at the end of the century, CDD + HDD will decrease in the North, with an opposite effect in the South. This work could be helpful in deciding where to live in the United States based on present and future thermal comfort, and could also provide a basis for estimates of changes in heating and cooling energy demand.

Psychology Degrees: Employment, Wage, and Career Trajectory Consequences.

Science.gov (United States)

Rajecki, D W; Borden, Victor M H

2011-07-01

Psychology is a very popular undergraduate major. Examining wage data from a range of degree holders reveals much about the expected career trajectories of those with psychology degrees. First, regarding baccalaureates, psychology and other liberal arts graduates-compared with those from certain preprofessional and technical undergraduate programs-generally fall in relatively low tiers of salary levels at both starting and later career points. Salary levels among baccalaureate alumni groups correlate with averaged measures of salary satisfaction, repeated job seeking, and perceptions of underemployment. These patterns seem to stem from the specific occupational categories (job titles) entered by graduates in psychology compared with other graduates, calling into question the employability advantage of so-called generic liberal arts skills. Second, psychology master's degree holders also generally fall in a low tier of salary among their science, engineering, and health counterparts. Third, psychology college faculty (including instructors) fall in low tiers of salary compared with their colleagues from other academic fields. Such broadly based indications of the relative economic disadvantages of psychology degrees have implications for career counseling in the field. © The Author(s) 2011.

Brief 74 Nuclear Engineering Enrollments and Degrees Survey, 2014 Data

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-03-15

The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014, and enrollments for fall 2014. There are three academic programs new to this year's survey. Thirty-five academic programs reported having nuclear engineering programs during 2014, and data were provided by all thirty-five. The enrollments and degrees data include students majoring in nuclear engineering or in an option program equivalent to a major. Two nuclear engineering programs have indicated that health physics option enrollments and degrees are also reported in the health physics enrollments and degrees survey.

Identification of entry-level competencies for associate degree radiographers as perceived by primary role definers

International Nuclear Information System (INIS)

Thorpe, R.L.

1981-01-01

The primary purpose of this study was to identify those competencies needed by Associate Degree Radiographers when they assume employment as entry-level practitioners. A second purpose of the study was to rank order the identified competencies within the role delineations recognized by the Essentials and Guidelines of an Accredited Educational Program for the Radiographer. These role delineations include: radiation protection, exercise discretion and judgment, emergency and life saving techniques, patient care and interpersonal communication, and role as professional member. A third purpose of the study was to examine the degree of consensus on role definition of entry-level competencies needed by Associate Degree Radiographers as perceived by primary role definers (such as employers, employees, and educators), and by other selected variables: age, sex, length of experience in radiologic technology, level of formal education, and place of employment. A major finding of this study was that respondents did not differ significantly in their ranking of entry-level competencies needed by Associate Degree Radiographers when the responses were analyzed according to position, age, sex, length of experience, level of education, or place of employment. Another important finding was that respondents considered all of the 63 competencies as important and needed by Associate Degree Radiographers upon initial employment.A major conclusion and recommendation of this study, in view of the high agreement on the rank ordering of competencies, was that these competencies should be included in a competency-based education model. It was further recommended that a three-way system of communication between employers, employees, and educators be considered in order to pool resources and to increase understanding of each position group's contribution and influence on entry-level Associate Degree Radiographers

Maintaining quality control in a nontraditional nuclear technology degree program

International Nuclear Information System (INIS)

DeSain, G.W.

1989-01-01

Regents College, created by the Board of Regents of the University of The State on New York in 1971, has been offering, since January 1985, AS and BS degrees in nuclear technology. The impetus for establishing the nuclear technology degrees came from nuclear utility management and had to do with the US Nuclear Regulatory Commission proposed rule regarding degreed operators on shift. There are a variety of ways to earn credits in Regents College degree programs: (1) college courses taken for degree-level credit from regionally accredited colleges; (2) courses sponsored by business, industry, or government that have been evaluated and recommended for credit by the New York National or American Council on Education (ACE's) Program on Noncollegiate Sponsored Instruction (PONSI); (3) military education that has been evaluated by ACE PONSI; (4) approved college-proficiency examinations; and (5) special assessment: an individualized examination of college-level knowledge gained from experience or independent study. Nuclear technology students primarily use college course work, evaluated military education, and proficiency examinations to complete degree programs. However, an increasing number of utilities are having training programs PONSI evaluated, resulting in an increased use of these courses in the nuclear technology degrees. Quality control is a function of several factors described in the paper

360/degree/ digital phase detector with 100-kHz bandwidth

International Nuclear Information System (INIS)

Reid, D.W.; Riggin, D.; Fazio, M.V.; Biddle, R.S.; Patton, R.D.; Jackson, H.A.

1981-01-01

The general availability of digital circuit components with propagation delay times of a few nanoseconds makes a digital phase detector with good bandwidth feasible. Such a circuit has a distinct advantage over its analog counterpart because of its linearity over a wide range of phase shift. A description is given of a phase detector that is being built at Los Alamos National Laboratory for the Fusion Materials Irradiation Test (FMIT) project. The specifications are 100-kHz bandwidth, linearity of /plus or minus/1/degree/ over /plus or minus/180/degree/ of phase shift, and 0.66/degree/ resolution. To date, the circuit has achieved the bandwidth and resolution. The linearity is approximately /plus or minus/3/degree/ over /plus or minus/180/degree/ phase shift. 3 refs

Actuator Placement in Multi-Degree-of-Freedom Vibration Simulators

Directory of Open Access Journals (Sweden)

Norman Fitz-Coy

1994-01-01

Full Text Available A method for comparing candidate actuator configurations for multi-degree-of-freedom (MDOF vibration simulators is presented. The method has its roots in the comparison of achievable subspaces and maximum error bounds; the comparison is accomplished via a QR decomposition. In instances where two configurations yield the same error bound, the ratio of the largest to smallest singular value is used to determine the “best” configuration. Both amplitude bounds at given sensor locations and relative significance of each sensor's output, if known, can be incorporated in the analysis. Through numerical examples, it is demonstrated that no simple rule of thumb criterion appears to exist for the selection of actuator placement in MDOF vibration simulators.

College Teaching as a Profession: The Doctor of Arts Degree.

Science.gov (United States)

Dressel, Paul L.

The history of the Doctor of Arts (D.A.) degree and issues related to its development are briefly traced, and D.A. programs presently available and the success of degree recipients are addressed. Attention is also directed to other types of degree programs that are available, including their advantages and disadvantages, factors involved in…

Petrological significance of REE in uraninite

International Nuclear Information System (INIS)

Feng Mingyue; Li Yuexiang; Xu Zhan.

1992-01-01

According to the petrological study of Zhuguangshan and Huanglongmiao granites and REE in uraninite from these granites, it can be concluded that REE contents in uraninite and granites are positively correlative; the partition characteristics of REE in uraninite are related to the acidity of initial rocks; and the fractionation degree of REE in uraninite reflects the differentiation degree of initial rocks

Petrological significance of REE in uraninite

Energy Technology Data Exchange (ETDEWEB)

Mingyue, Feng; Yuexiang, Li; Zhan, Xu

1992-09-01

According to the petrological study of Zhuguangshan and Huanglongmiao granites and REE in uraninite from these granites, it can be concluded that REE contents in uraninite and granites are positively correlative; the partition characteristics of REE in uraninite are related to the acidity of initial rocks; and the fractionation degree of REE in uraninite reflects the differentiation degree of initial rocks.

Effect of green tea on the second degree burn wounds in rats

Directory of Open Access Journals (Sweden)

Mohammad Javad Fatemi

2014-01-01

Full Text Available Background: Various studies indicate that the green tea has anti-inflammatory and anti-oxidative properties. Moreover, a few studies have been carried out that demonstrate beneficial effects of green tea on burned patients. Materials and Methods: In this study, green tea, Vaseline, and silver sulfadiazine dressings were used as first-aid treatment to deep dermal contact burns in rats, compared with a control of nothing. After creating second-degree burn on the dorsum of rats, the treatments were applied for 15 min in four groups. Wound dressing changes were daily. Macroscopic study was performed on days 1, 3, 7, and 14 by using a digital camera and software processing of photos. Microscopic examination was done by pathologic evaluation of skin specimens on day 14. Results: We observed that green tea usage significantly decreased burn size in comparison to the control group (P = 0.004. Conclusion: Green tea is effective on healing process of second degree burn wounds.

[Evaluation of three-dimensional tumor microvascular architecture phenotype heterogeneity in non-small cell carcinoma and its significance].

Science.gov (United States)

Zhou, Hui; Liu, Jinkang; Chen, Shengxi; Xiong, Zeng; Zhou, Jianhua; Tong, Shiyu; Chen, Hao; Zhou, Moling

2012-06-01

To explore the degree, mechanism and clinical significance of three-dimensional tumor microvascular architecture phenotype heterogeneity (3D-TMAPH) in non-small cell carcinoma (NSCLC). Twenty-one samples of solitary pulmonary nodules were collected integrally. To establish two-dimensional tumor microvascular architecture phenotype (2D-TMAP) and three-dimensional tumor microvascular architecture phenotype (3D-TMAP), five layers of each nodule were selected and embedded in paraffin. Test indices included the expressions of vascular endothelial growth factor (VEGF), proliferating cell nuclear antigen (PCNA), EphB4, ephfinB2 and microvascular density marked by anti-CD34 (CD34-MVD). The degrees of 3D-TMAPH were evaluated by the coefficient of variation and extend of heterogeneity. Spearman rank correlation analysis was used to investigate the relationships between 2D-TMAP, 3D-TMAP and clinicopathological features. 3D-TMAPH showed that 2D-TMAP heterogeneity was expressed in the tissues of NSCLC. The heterogeneities in the malignant nodules were significantly higher than those in the active inflammatory nodules and tubercular nodules. In addition, different degrees of heterogeneity of CD34-MVD and PCNA were found in NSCLC tissues. The coefficients of variation of CD34- MVD and PCNA were positively related to the degree of differentiation (all P0.05). The level of heterogeneity of various expression indexes (ephrinB2, EphB4, VEGF) in NSCLC tissues were inconsistent, but there were no significant differences in heterogeneity in NSCLC tissues with different histological types (P>0.05). 3D-TMAPH exists widely in the microenvironment during the genesis and development of NSCLC and has a significant impact on its biological complexity.

SEM-EDS and XRD study of a NiCrAlU alloy at temperatures from 800 celsius degree to 1300 celsius degree

International Nuclear Information System (INIS)

Al-Badairy, H.; Fox, P.

2004-01-01

Full text.The oxidation behaviour of a 74.5wt%Ni, 20wt%Cr, 5wt%Al and 0.5wt%U alloy was examined using Scanning Electron Microscopy with X-ray Energy Dispersive Spectroscopy (SEM-EDS) and X-ray Diffractometry (XRD). The oxidation temperature ranged from 800 to 1300 celsius degree in laboratory air with oxidation times up to 120h. Analysis showed that during short term oxidation (40h) at the lower temperatures there was evidence of the formation of Cr, Ni and Al oxides. With increasing oxidation time, the Cr-rich oxide became predominant with the presence of islands of Ni-rich oxide, but no uranium was detected at the outermost layer of the scale. The scale was of flat topography with spallation occurring after 40h oxidation at 900 celsius degree and increasing with increasing temperature and time. Cross-sectional investigations indicated the presence of an internal oxidation zone comprising an Al-rich oxide beneath the outer Cr-rich scale with significant amounts of uranium. The depth of this zone varied from 1 micron to 60 microns and increased with increasing the oxidation temperature and time. At higher temperatures (above 1000 celsius degree), the internal oxidation zone ceased to grow due to the formation of a complete layer of alumina which protected the metal substrate from further degradation. The constituents of the scales formed reflect the selective oxidation of Cr and Al as a result of the higher reactivity of aluminium and chromium compared to nickel and the greater stability of Al 2 O 3 and Cr 2 O 3 compared to NiO. This study showed that Al-rich oxide was not the predominant protective oxide and the presence of uranium was restricted to the grain boundaries of the metal substrate and to within the internal oxidation zone. It appeared that the Cr-rich scale formed on this alloy does not to convolute. This may be due to the influence of uranium since Cr-rich scales forming on NiCrAl containing no uranium are often convoluted

Master's degree in nuclear engineering by videotaped courses

International Nuclear Information System (INIS)

Corradini, M.L.; Vogelsang, W.F.

1991-01-01

In 1986, a group of northern midwest utilities met with faculty from the nuclear engineering department at the University of Wisconsin (UW) to discuss the possibility of offering graduate courses by videotape for academic credit and earning a master's degree. Four years later, two utility employees from Northern States Power (NSP) and Wisconsin Electric Power Companies (WEPCO) graduated from the University of Wisconsin with master's degrees earned entirely by taking videotape graduate courses at their individual nuclear power plant sites. Within these 4 years, more than a dozen videotaped graduate courses were developed by the faculty of the department in a formalized master's degree program in nuclear engineering and engineering physics. This paper outlines the program's development and its current features

[Correlation coefficient-based principle and method for the classification of jump degree in hydrological time series].

Science.gov (United States)

Wu, Zi Yi; Xie, Ping; Sang, Yan Fang; Gu, Hai Ting

2018-04-01

The phenomenon of jump is one of the importantly external forms of hydrological variabi-lity under environmental changes, representing the adaption of hydrological nonlinear systems to the influence of external disturbances. Presently, the related studies mainly focus on the methods for identifying the jump positions and jump times in hydrological time series. In contrast, few studies have focused on the quantitative description and classification of jump degree in hydrological time series, which make it difficult to understand the environmental changes and evaluate its potential impacts. Here, we proposed a theatrically reliable and easy-to-apply method for the classification of jump degree in hydrological time series, using the correlation coefficient as a basic index. The statistical tests verified the accuracy, reasonability, and applicability of this method. The relationship between the correlation coefficient and the jump degree of series were described using mathematical equation by derivation. After that, several thresholds of correlation coefficients under different statistical significance levels were chosen, based on which the jump degree could be classified into five levels: no, weak, moderate, strong and very strong. Finally, our method was applied to five diffe-rent observed hydrological time series, with diverse geographic and hydrological conditions in China. The results of the classification of jump degrees in those series were closely accorded with their physically hydrological mechanisms, indicating the practicability of our method.

Investigation of porosity and fractal properties of the sintered metal and semiconductor layers in the MDS capacitor structure

Directory of Open Access Journals (Sweden)

Skatkov Leonid

2012-01-01

Full Text Available MDS capacitor (metal - dielectric - semiconductor is a structure in which metal plate is represented by compact bulk-porous pellets of niobium sintered powder, and semiconductor plate - by pyrolytic layer of MnO2. In the present paper we report the results of investigation of microporosity of sintered Nb and pyrolytic MnO2 and also the fractal properties of semiconductor layer.

Maiorana-McFarland class: Degree optimization and algebraic properties

DEFF Research Database (Denmark)

Pasalic, Enes

2006-01-01

degree of functions in the extended Maiorana-McFarland (MM) class (nonlinear resilient functions F : GF (2)(n) -> GF (2)(m) derived from linear codes). We also show that in the Boolean case, the same subclass seems not to have an optimized algebraic immunity, hence not providing a maximum resistance......In this paper, we consider a subclass of the Maiorana-McFarland class used in the design of resilient nonlinear Boolean functions. We show that these functions allow a simple modification so that resilient Boolean functions of maximum algebraic degree may be generated instead of suboptimized degree...... in the original class. Preserving a high-nonlinearity value immanent to the original construction method, together with the degree optimization gives in many cases functions with cryptographic properties superior to all previously known construction methods. This approach is then used to increase the algebraic...

The effectiveness of the Pilates method: reducing the degree of non-structural scoliosis, and improving flexibility and pain in female college students.

Science.gov (United States)

Alves de Araújo, Maria Erivânia; Bezerra da Silva, Elirez; Bragade Mello, Danielli; Cader, Samária Ali; Shiguemi Inoue Salgado, Afonso; Dantas, Estélio Henrique Martin

2012-04-01

To evaluate the effectiveness of Pilates with regard to the degree of scoliosis, flexibility and pain. The study included 31 female students divided into two groups: a control group (CG = 11), which had no therapeutic intervention, and an experimental group (EG = 20), which underwent Pilates-based therapy. We used radiological goniometry measurements to assess the degree of scoliosis, standard goniometry measurements to determine the degree of flexibility and the scale of perceived pain using the Borg CR 10 to quantify the level of pain. The independent t test of the Cobb angle (t = - 2.317, p = 0.028), range of motion of trunk flexion (t = 3.088, p = 0.004) and pain (t = -2.478, p = 0.019) showed significant differences between the groups, with best values in the Pilates group. The dependent t test detected a significant decrease in the Cobb angle (Δ% = 38%, t = 6.115, p = 0.0001), a significant increase in trunk flexion (Δ% = 80%, t = -7.977, p = 0.0001) and a significant reduction in pain (Δ% = 60%, t = 7.102, p = 0.0001) in the EG. No significant difference in Cobb angle (t = 0.430, p = 0.676), trunk flexion, (t = 0.938p = 0.371) or pain (t = 0.896, p = 0.391) was found for the CG. The Pilates group was better than control group. The Pilates method showed a reduction in the degree of non-structural scoliosis, increased flexibility and decreased pain. Copyright © 2011 Elsevier Ltd. All rights reserved.

Conversion degrees of resin composites using different light sources.

Science.gov (United States)

Ozturk, Bora; Cobanoglu, Nevin; Cetin, Ali Rıza; Gunduz, Beniz

2013-01-01

The objective of this study was to compare the conversion degree of six different composite materials (Filtek Z 250, Filtek P60, Spectrum TPH, Pertac II, Clearfil AP-X, and Clearfil Photo Posterior) using three different light sources (blue light-emitting diode [LED], plasma arc curing [PAC], and conventional halogen lamp [QTH]). Composites were placed in a 2 mm thick and 5 mm diameter Teflon molds and light cured from the top using three methods: LED for 40 s, PAC for 10 s, and QTH for 40 s. A Fourier Transform Infrared Spectroscopy (FTIR) was used to evaluate the degree of conversion (DC) (n=5). The results were analyzed with two-way analysis of variance and Tukey HSD test. DC was significantly influenced by two variables, light source and composite (PDC values than LED (PDC values of QTH and PAC or between DC values of LED and PAC (P>.05). The highest DC was observed in the Z 250 composite specimens following photopolymerization with QTH (70%). The lowest DC was observed in Clearfil Photo Posterior composite specimens following photo-polymerization with LED (43%). The DC was found to be changing according to both light sources and composite materials used. Conventional light halogen (QTH) from light sources and Filtek Z 250 and Filtek P 60 among composite materials showed the most DC performance.

Research and application of soil-mercury-surveys method for locating uranium

International Nuclear Information System (INIS)

You Yunfei; Lu Shili; Jiao Zongrun

1995-06-01

Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

Degree of Acetylization Chitosan Gonggong Snail Shells

Science.gov (United States)

Horiza, H.; Iskandar, I.; Aldo, N.

2018-04-01

Chitosan is a polysaccharide obtained from the deacetylation of chitin, which is generally derived from crustacean animal waste and animal skins other sea. One marine animals that have compounds that can be processed chitin chitosan is derived from the snail Gonggong marine waters of Riau Islands province. The purpose of this study was to determine the degree of chitosan from the shells of snails asetilisasi Gonggong. This research is an experimental research laboratory. The results of this study indicate that the degree of chitosan shell snail deasetilisasi Gonggong is 70.27%.

Relationships between central and peripheral corneal thickness in different degrees of myopia.

Science.gov (United States)

Ortiz, Sara; Mena, Laura; Rio-San Cristobal, Ana; Martin, Raul

2014-01-01

To analyze the relationship between the central corneal thickness (CCT) and mid-peripheral corneal thickness (PCT) with the degree of myopia [axial length (AL) and spherical equivalent refractive error (SE)]. 175 right myopic eyes from 175 patients were divided according to the degree of SE: group #1 (n=76, 12.00 D). The CCT and PCT (3mm from the apex to the superior, inferior, nasal and temporal locations) were measured with the Orbscan-II. Relative peripheral index (RPI) was calculated by dividing the PCT by the CCT. The AL was measured with the IOL Master, and the SE was obtained with subjective refraction. AL was 25.18±1.16 mm, 26.59±1.26 mm and 29.45±2.58 mm and SE was -3.31±1.40 D, -8.32±1.64 D and -16.44±4.48 D for groups #1, #2 and #3, respectively. Non-statistically significant differences in central and peripheral corneal thickness were found between groups (P>0.05 ANOVA). Non-significant relationship was found between central and peripheral corneal thickness with the AL and SE in the three study groups and in the total sample (r0.05). The RPI values were similar between groups without significant difference between groups (P>0.05 ANOVA). Linear relationship was found between RPI superior location in group #2 (r=-0.23; P=0.04) and RPI nasal location in group #3 with the EE (r=0.41; P=0.03). There are no significant differences among low, moderate and extremely myopic eyes related to the CCT and PCT. Corneal thickness is very similar in myopic eyes with small differences that are not clinically relevant to myopic patient management. Copyright © 2012 Spanish General Council of Optometry. Published by Elsevier Espana. All rights reserved.

Effects of degree correlation on scale-free gradient networks

International Nuclear Information System (INIS)

Pan Guijun; Yan Xiaoqing; Ma Weichuan; Luo Yihui; Huang Zhongbing

2010-01-01

We have studied the effects of degree correlation on congestion pressure in scale-free gradient networks. It is observed that the jamming coefficient J is insensitive to the degree correlation coefficient r for assortative and strongly disassortative scale-free networks, and J markedly decreases with an increase in r for weakly disassortative scale-free networks. We have also investigated the effects of degree correlation on the topology structure of scale-free gradient networks, and discussed the relation between the topology structure properties and transport efficiency of gradient networks.

1-Colored Archetypal Permutations and Strings of Degree n

Directory of Open Access Journals (Sweden)

Gheorghe Eduard Tara

2012-10-01

Full Text Available New notions related to permutations are introduced here. We present the string of a 1-colored permutation as a closed planar curve, the fundamental 1-colored permutation as an equivalence class related to the equivalence in strings of the 1-colored permutations. We give formulas for the number of the 1-colored archetypal permutations of degree n. We establish an algorithm to identify the 1- colored archetypal permutations of degree n and we present the atlas of the 1-colored archetypal strings of degree n, n ≤ 7, based on this algorithm.

The monitoring and fatigue behavior of CFCCs at ambient temperature and 1000 degrees C

International Nuclear Information System (INIS)

Miriyala, N.; Liaw, P.K.; McHargue, C.J.

1997-01-01

Metallographically polished flexure bars of Nicalon/SiC and Nicalon/alumina composites were subjected to monotonic and cycle-fatigue loadings, with loading either parallel or normal to the fabric plies. The fabric orientation did not significantly affect the mechanical behavior of the Nicalon/SiC composite at ambient temperature. However, the mechanical behavior of the Nicalon/alumina composite was significantly affected by the fabric orientation at ambient temperature in air and at 1000 degrees C in argon atmosphere. In addition, there was a significant degradation in the fatigue performance of the alumina matrix composite at the elevated temperature, owing to creep in the material and degradation in the fiber strength

The monitoring and fatigue behavior of CFCCs at ambient temperature and 1000{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Miriyala, N.; Liaw, P.K.; McHargue, C.J. [Univ. of Tennessee, Knoxville, TN (United States)] [and others

1997-04-01

Metallographically polished flexure bars of Nicalon/SiC and Nicalon/alumina composites were subjected to monotonic and cycle-fatigue loadings, with loading either parallel or normal to the fabric plies. The fabric orientation did not significantly affect the mechanical behavior of the Nicalon/SiC composite at ambient temperature. However, the mechanical behavior of the Nicalon/alumina composite was significantly affected by the fabric orientation at ambient temperature in air and at 1000{degrees}C in argon atmosphere. In addition, there was a significant degradation in the fatigue performance of the alumina matrix composite at the elevated temperature, owing to creep in the material and degradation in the fiber strength.

The effect of the pathway to a two degrees warmer world on the regional temperature change of Europe

Directory of Open Access Journals (Sweden)

Cathrine Fox Maule

2017-08-01

Full Text Available The purpose of this study is to investigate if the pathway to reach a 2 degree warmer world influences the regional climate in Europe at the time of 2 degrees of global warming above the pre-industrial level. We have investigated this using climate change data from ensembles of both Global Climate Models and Regional Climate Models. We compare the change of regional temperature in Europe to the global temperature change for different emission scenarios, following the IPCC Representative Concentration Pathways (RCP, to see if the pathway has any influence. We find that there is a small but significant difference in the regional temperature change, but the effect is small compared to internal variability on the timescales involved in reaching +2 degrees for the investigated emission scenarios. From an adaptation point of view, reaching +2 degrees as slowly as possible will obviously allow for a longer time period to implement adaptation measures to mitigate the effect of climate change.

Significance assessment of the external control effects of lecturers

Directory of Open Access Journals (Sweden)

Kurbatova Margarita, V.

2015-06-01

Full Text Available The state policy regarding higher education has changed in the last decade. These changes were part of the efficiency programs of the public sector. Governments of different countries ruined previously existing system of higher education state regulation and attempted to build the quasi-market structure in the higher education industry. Such transformations served as timely and progressive reforms in the recent studies of the economics of education. Substitution of bureaucratic management mechanisms and modern competition managerial tools are articulated. Economic and institutional and sociological studies on the effects of the introduction of quasi-markets and managerial tools in higher education governance oppose to orthodox market approach. They drew attention to the fact that evaluation methods and improve the effectiveness of organizations and employees that are typical of the private sector often produce results that differ from those in the public sector. To assess the consequences of the introduction of managerial tools of external control activities of university lecturers used a methodology based on the allocation of the individual structural components (effects and building on their basis of a multi-level hierarchical model in the research. Each component of the model (single effect is characterized by a degree of significance (importance and the degree of severity. The results of the systematization and assessment of the significance of the effects of external control activity of lecturers of Russian universities implemented in conditions of quasi-market mechanisms of the higher education system are highlighted in the paper.

Degree connectivity in body dysmorphic disorder and relationships with obsessive and compulsive symptoms.

Science.gov (United States)

Beucke, Jan C; Sepulcre, Jorge; Buhlmann, Ulrike; Kathmann, Norbert; Moody, Teena; Feusner, Jamie D

2016-10-01

Individuals with body dysmorphic disorder (BDD) and obsessive-compulsive disorder (OCD) are categorized within the same major diagnostic group and both show regional brain hyperactivity in the orbitofrontal cortex (OFC) and the basal ganglia during symptom provocation. While recent studies revealed that degree connectivity of these areas is abnormally high in OCD and positively correlates with symptom severity, no study has investigated degree connectivity in BDD. We used functional magnetic resonance imaging (fMRI) to compare the local and distant degree of functional connectivity in all brain areas between 28 unmedicated BDD participants and 28 demographically matched healthy controls during a face-processing task. Correlational analyses tested for associations between degree connectivity and symptom severity assessed by the BDD version of the Yale-Brown obsessive-compulsive scale (BDD-Y-BOCS). Reduced local amygdalar connectivity was found in participants with BDD. No differences in distant connectivity were found. BDD-Y-BOCS scores significantly correlated with the local connectivity of the posterior-lateral OFC, and distant connectivity of the posterior-lateral and post-central OFC, respectively. These findings represent preliminary evidence that individuals with BDD exhibit brain-behavioral associations related to obsessive thoughts and compulsive behaviors that are highly similar to correlations previously found in OCD, further underscoring their related pathophysiology. This relationship could be further elucidated through investigation of resting-state functional connectivity in BDD, ideally in direct comparison with OCD and other obsessive-compulsive and related disorders. Copyright © 2016 Elsevier B.V. and ECNP. All rights reserved.

Inbreeding coefficients and degree of consanguineous marriages in Spain: a review.

Science.gov (United States)

Fuster, Vicente; Colantonio, Sonia Edith

2003-01-01

The contribution of consanguineous marriages corresponding to uncle-niece or aunt-nephew (C12), first cousin (C22), first cousin once removed (C23), and second cousin (C33) to the inbreeding coefficient (alpha) was analyzed from a sample of Spanish areas and periods. Multiple regressions were performed taking as independent variables the different degrees of consanguinity previously selected (C12, C22, C23, and C33) and as dependent variable the inbreeding coefficient (alpha). According to the results obtained for any degree and period, rural frequencies always surpass urban. However, the pattern is similar in both areas. In the period where consanguinity was more elevated (1890-1929) the C22/C33 ratio increased. Its variation is not due to C22 and C33 changes in the same way. In rural areas, this ratio surpasses the expected value by a factor of 2-3, but in urban areas it was 7-10 times larger, in some cases due to migration. While in rural Spain the C33 frequency was approximately 1.5 times C22, in cities C22 was 1.5 times C33. The best fit among the various types of consanguineous matings and alpha involves a lineal relationship. Regardless of the number of variables contributing significantly to alpha, C22 matings are always present. Moreover, their standardized (beta) coefficients are the highest. The above indicates that this consanguineous relationship conditions the inbreeding coefficient the most. In the period of greater consanguinity, close relationships, uncle-niece C12, and first cousin once removed (C23) make a significant contribution to alpha. In rural Spain second cousins (C33) always significantly determined alpha; however, in cities the inbreeding variation was mainly due to C12 and C23. Copyright 2003 Wiley-Liss, Inc.

g-boson degree of freedom in vibrational regions

International Nuclear Information System (INIS)

Di Yaomin

1991-01-01

The g-boson degree of freedom in the vibrational regions is discussed in term of the energies and the electromagnetic transitions. Several closed expressions for the rates of M1, E2 transitions and the E2, M1 mixing ratios are obtained. Some survey is made and it reveals it is meaningful to investigate the g-boson degree of freedom in those regions

Method of measuring the degree of fluid pollution

International Nuclear Information System (INIS)

Mortensen, A.; Hammer, E.A.

1995-01-01

The invention relates to an method and device for measuring the degree of pollution from particulates in fluids. The device consists of an emitter sending out green and red light in succession through the fluid to a light recorder. The recorder itself includes a unit designed for comparing the measured intensity of light with the values of known pollution degree in fluids. 2 figs

High temperature SU-8 pyrolysis for fabrication of carbon electrodes

DEFF Research Database (Denmark)

Hassan, Yasmin Mohamed; Caviglia, Claudia; Hemanth, Suhith

2017-01-01

In this work, we present the investigation of the pyrolysis parameters at high temperature (1100 °C) for the fabrication of two-dimensional pyrolytic carbon electrodes. The electrodes were fabricated by pyrolysis of lithographically patterned negative epoxy based photoresist SU-8. A central...... composite experimental design was used to identify the influence of dwell time at the highest pyrolysis temperature and heating rate on electrical, electrochemical and structural properties of the pyrolytic carbon: Van der Pauw sheet resistance measurements, cyclic voltammetry, electrochemical impedance...... spectroscopy and Raman spectroscopy were used to characterize the pyrolytic carbon. The results show that the temperature increase from 900 °C to 1100 °C improves the electrical and electrochemical properties. At 1100 °C, longer dwell time leads to lower resistivity, while the variation of the pyrolysis...

Correlation between physics A-levels/A-levels and degree performance

Science.gov (United States)

Chadwick, Roy

1985-09-01

The author presents an analysis of 178 students who left Solihull Sixth form College between 1975 and 1981 to do a degree in physics (approximately one third) or engineering (approximately two thirds) at university or polytechnic. The first table is an analysis of physics A-level grade and degree performance; the second table an analysis of the points total for physics A-level plus maths A-level (five for A, four for B, etc.), against degree performances, and the final table an analysis of the points total for physics A-level plus maths A-level plus third A-level (again five for A, four for B, etc.), against degree performance.

On Effective Degrees of Freedom in the Early Universe

Directory of Open Access Journals (Sweden)

Lars Husdal

2016-12-01

Full Text Available We explore the effective degrees of freedom in the early Universe, from before the electroweak scale at a few femtoseconds after the Big Bang until the last positrons disappeared a few minutes later. We look at the established concepts of effective degrees of freedom for energy density, pressure, and entropy density, and introduce effective degrees of freedom for number density as well. We discuss what happens with particle species as their temperature cools down from relativistic to semi- and non-relativistic temperatures, and then annihilates completely. This will affect the pressure and the entropy per particle. We also look at the transition from a quark-gluon plasma to a hadron gas. Using a list a known hadrons, we use a “cross-over” temperature of 214 MeV, where the effective degrees of freedom for a quark-gluon plasma equals that of a hadron gas.

Joint Degree Program: the Perspective of Employers

Directory of Open Access Journals (Sweden)

Tatjana Bilevičienė

2013-08-01

Full Text Available Purpose — the purpose of this article is to extend discussion towards the need and importance of joint degree programs in modern universities, introducing the perspective of the employers toward this question. Design/methodology/approach — the research was conducted to analyze the demand of joint degree programs from the perspective of employers, identify weak and strong aspects, opinion and demand for graduates of such programs. To achieve this purpose, a combination of theoretical and empirical methods was chosen: document analysis (previous studies, statistics was conducted and an online qualitative survey was organized. Findings — The analysis of articles, studies and statistics points out the challenges and threats faced by universities nowadays, forcing higher education institutions to find new ways to raise the quality of studies and raise the interest of employers to choose graduates from MRU, as well as the satisfaction of employers with their choice of employees. Theoretical analysis pointed out these challenges and requirements for the modern employee, summarised the challenges in preparation of IT field specialists. The conducted research results showed that the diploma of joint degree programs would not be treated as an advantage of possible employee from the perspective of employers in case some important aspects will not be taken into consideration by program creators. On the other hand, undeniably there are strong sides, such as knowledge in the fields of foreign language, international experience, innovativeness and creativeness of employees that would be treated as an advantage in the process of selection for positions of any technical support related positions. Research limitations/implications — employers, whose business activities are closely related to information technology, have been invited as experts. In addition, these experts have a good understanding of the specifics of joint degree programs. The received

Evaluating statistical tests on OLAP cubes to compare degree of disease.

Science.gov (United States)

Ordonez, Carlos; Chen, Zhibo

2009-09-01

Statistical tests represent an important technique used to formulate and validate hypotheses on a dataset. They are particularly useful in the medical domain, where hypotheses link disease with medical measurements, risk factors, and treatment. In this paper, we propose to compute parametric statistical tests treating patient records as elements in a multidimensional cube. We introduce a technique that combines dimension lattice traversal and statistical tests to discover significant differences in the degree of disease within pairs of patient groups. In order to understand a cause-effect relationship, we focus on patient group pairs differing in one dimension. We introduce several optimizations to prune the search space, to discover significant group pairs, and to summarize results. We present experiments showing important medical findings and evaluating scalability with medical datasets.

Polarimetric purity and the concept of degree of polarization

Science.gov (United States)

Gil, José J.; Norrman, Andreas; Friberg, Ari T.; Setälä, Tero

2018-02-01

The concept of degree of polarization for electromagnetic waves, in its general three-dimensional version, is revisited in the light of the implications of the recent findings on the structure of polarimetric purity and of the existence of nonregular states of polarization [J. J. Gil et al., Phys Rev. A 95, 053856 (2017), 10.1103/PhysRevA.95.053856]. From the analysis of the characteristic decomposition of a polarization matrix R into an incoherent convex combination of (1) a pure state Rp, (2) a middle state Rm given by an equiprobable mixture of two eigenstates of R, and (3) a fully unpolarized state Ru -3 D, it is found that, in general, Rm exhibits nonzero circular and linear degrees of polarization. Therefore, the degrees of linear and circular polarization of R cannot always be assigned to the single totally polarized component Rp. It is shown that the parameter P3 D proposed formerly by Samson [J. C. Samson, Geophys. J. R. Astron. Soc. 34, 403 (1973), 10.1111/j.1365-246X.1973.tb02404.x] takes into account, in a proper and objective form, all the contributions to polarimetric purity, namely, the contributions to the linear and circular degrees of polarization of R as well as to the stability of the plane containing its polarization ellipse. Consequently, P3 D constitutes a natural representative of the degree of polarimetric purity. Some implications for the common convention for the concept of two-dimensional degree of polarization are also analyzed and discussed.

Effect of particle size on mixing degree in dispensation.

Science.gov (United States)

Nakamura, Hitoshi; Yanagihara, Yoshitsugu; Sekiguchi, Hiroko; Ohtani, Michiteru; Kariya, Satoru; Uchino, Katsuyoshi; Suzuki, Hiroshi; Iga, Tatsuji

2004-03-01

By using lactose colored with erythrocin, we examined the effect of particle size on mixing degree during the preparation of triturations with a mortar and pestle. We used powders with different distributions of particle sizes, i.e., powder that passed through 32-mesh but was trapped on a 42-mesh sieve (32/42-mesh powder), powder that passed through a 42-mesh sieve but was trapped on a 60-mesh sieve (42/60-mesh powder), powder that passed through a 60-mesh sieve but was trapped on a 100-mesh sieve (60/100-mesh powder), and powder that passes through a 100-mesh sieve (> 100-mesh powder). The mixing degree of colored powder and non-colored powder whose distribution of particle sizes was the same as that of the colored powder was excellent. The coefficient of variation (CV) value of the mixing degree was 6.08% after 40 rotations when colored powder was mixed with non-colored powder that both passed through a 100-mesh sieve. The CV value of the mixing degree was low in the case of mixing of colored and non-colored powders with different particle size distributions. After mixing, about 50% of 42/60-mesh powder had become smaller particles, whereas the distribution of particle sizes was not influenced by the mixing of 60/100-mesh powder. It was suggested that the mixing degree is affected by distribution of particle sizes. It may be important to determine the mixing degrees for drugs with narrow therapeutic ranges.

{sup 252}Cf spontaneous prompt fission neutron spectrum measured at 0 degree and 180 degree relative to the fragment motion

Energy Technology Data Exchange (ETDEWEB)

Shanglian, Bao; Jinquan, Liu [Beijing Univ., BJ (China); Batenkov, O I; Blinov, M V; Smirnov, S N [V.G. Khlopin Radium Institute, ST. Petersburg (Russian Federation)

1994-09-01

The {sup 252}Cf spontaneous prompt fission neutron spectrum at 0 degree and 180 degree relative to the motion direction of corresponding fission fragments was measured. High angular resolution for fragment measurements and high energy resolution for neutron measurements were obtained using multi-parameter TOF spectrometer. The results showed that there is a symmetric distribution of `forward` and `backward` for low energy in C.M.S. neutrons, which was an evidence of nonequilibrium neutrons existed in fission process.

Method of extracting significant trouble information of nuclear power plants using probabilistic analysis technique

International Nuclear Information System (INIS)

Shimada, Yoshio; Miyazaki, Takamasa

2005-01-01

In order to analyze and evaluate large amounts of trouble information of overseas nuclear power plants, it is necessary to select information that is significant in terms of both safety and reliability. In this research, a method of efficiently and simply classifying degrees of importance of components in terms of safety and reliability while paying attention to root-cause components appearing in the information was developed. Regarding safety, the reactor core damage frequency (CDF), which is used in the probabilistic analysis of a reactor, was used. Regarding reliability, the automatic plant trip probability (APTP), which is used in the probabilistic analysis of automatic reactor trips, was used. These two aspects were reflected in the development of criteria for classifying degrees of importance of components. By applying these criteria, a simple method of extracting significant trouble information of overseas nuclear power plants was developed. (author)

On the Lorentz degree of a product of polynomials

KAUST Repository

Ait-Haddou, Rachid

2015-01-01

In this note, we negatively answer two questions of T. Erdélyi (1991, 2010) on possible lower bounds on the Lorentz degree of product of two polynomials. We show that the correctness of one question for degree two polynomials is a direct consequence

Science Majors and Degrees among Asian-American Students: Influences of Race and Sex in "model Minority" Experiences

Science.gov (United States)

Meng, Yu; Hanson, Sandra L.

Both race and sex continue to be factors that stratify entry into science education and occupations in the United States. Asian-Americans (men and women) have experienced considerable success in the sciences and have earned the label of "model minority." The complexities and patterns involved in this success remain elusive. We use several concepts coming out of the status attainment framework and a multicultural gender perspective to explore the way in which race and sex come together to influence choices of science major and degree. Our sample consists of Asian-American and white students in the National Educational Longitudinal Study. Findings suggest that being male and being Asian-American are both associated with higher chances of pursuing majors and degrees in science. The male advantage is greater than the Asian-American advantage. Findings also suggest that race and sex interact in the science decision. For example, race differences (with an Asian-American advantage) in choice of science major are significant for women but not men. Sex differences (with a male advantage) in choice of science major are significant in the white, but not the Asian-American sample. A different set of race and sex patterns is revealed in the science degree models. Processes associated with family socioeconomic status and student characteristics help to explain race and sex patterns. Findings suggest that when Asian-American youths have closer ties to the Asian culture, they are more likely to choose science majors and degrees. Implications for policy, practice, and research in science education are discussed.

Life after a Humanities Degree

Science.gov (United States)

Masola, Athambile

2016-01-01

This article explores the experiences of a humanities graduate after leaving the academy. The author considers her own education in light of the historical changes in South Africa's education system. The article is a personal account of the questions and challenges encountered in choosing a humanities degree in a context where a tertiary education…

Special Degree Programs for Adults

Science.gov (United States)

Continuing Education for Adults, 1970

1970-01-01

Briefly describes Bachelor of Liberal Studies programs at six colleges and universities, the Master of Liberal Studies program at Boston University, and the Master of Engineering degree at the University of California at Los Angeles, as well as programs being conducted on a graduate level by Arthur D. Little, Inc. for government and industrial…

Boosting Female Ambition: How College Diversity Impacts Graduate Degree Aspirations of Women. ASHE Annual Meeting Paper.

Science.gov (United States)

Tsui, Lisa

In seeking to expand research on the actual effects of diversity on college students, this study investigated whether various multi-cultural and feminism-related variables at the individual, peer, and institutional levels significantly influenced educational degree ambitions among women. The study used data from the Cooperative Institutional…

The physical gravitational degrees of freedom

International Nuclear Information System (INIS)

Anderson, E; Barbour, J; Foster, B Z; Kelleher, B; Murchadha, N O

2005-01-01

When constructing general relativity (GR), Einstein required 4D general covariance. In contrast, we derive GR (in the compact, without boundary case) as a theory of evolving three-dimensional conformal Riemannian geometries obtained by imposing two general principles: (1) time is derived from change; (2) motion and size are relative. We write down an explicit action based on them. We obtain not only GR in the CMC gauge, in its Hamiltonian 3 + 1 reformulation, but also all the equations used in York's conformal technique for solving the initial-value problem. This shows that the independent gravitational degrees of freedom obtained by York do not arise from a gauge fixing but from hitherto unrecognized fundamental symmetry principles. They can therefore be identified as the long-sought Hamiltonian physical gravitational degrees of freedom

The significance of deaf identity for psychological well-being

DEFF Research Database (Denmark)

Chapman, Madeleine; Dammeyer, Jesper

2017-01-01

of psychological well-being than those with a marginal identity. Further, it found that additional disability, educational level, and feeling discriminated against significantly and independently explained the degree of psychological well-being. Results are discussed here with respect to social identity theory......Research has paid attention to how deaf identity affects life outcomes such as psychological well-being. However, studies are often carried out with small samples and without controlling for other variables. This study examined how different forms of identity—deaf, hearing, bicultural (deaf...... and hearing), and marginal (neither deaf nor hearing)—were associated with levels of psychological well-being and a number of other variables. The sample was 742 adults with hearing loss in Denmark. The study found that those with a deaf, hearing or bicultural identity had significantly higher levels...

The Degree of Autonomy of the Romanian Local Public Expenditures

Directory of Open Access Journals (Sweden)

Maria Letitia Andronic (Bratulescu

2016-04-01

Full Text Available The process of local public spending optimization is extensively studied by those who have the power of decision towards saving. Even if the goal is to adjust the imbalance revenues/expenditures, the trend to spend more than accumulated is still a matter of concern. Our objective is that of analyzing the local governments’ functional expenditures by measuring the degree of decentralization/autonomy. The value of the paper is given by the model we applied for Romania which is based on spending management. By analyzing different types of expenses, we have highlighted that local expenditures represent instruments of strengthening or weakening local autonomy. The indicators measure the effectiveness of local expenditures by using the model published by The World Bank in 2006. We gathered information through interviewing different Town-Hall representatives from Brasov County and then we gave scores and established ranks. As the degree of autonomy reached a score of about 3 on a scale of 1-4, we identified that the class in which Romania is placed (B is mostly defined in terms of delegated powers and not decentralized competences. The study is significant for politicians, for those responsible for implementing decentralization, but also for the taxpayers who deserve the best public services.

Einstein equations and Fermion degrees of freedom

International Nuclear Information System (INIS)

Luetz, E.F.; Vasconcellos, C.A.Z.

2001-01-01

When Dirac derived the special relativistic quantum equation which brings his name, it became evident that the spin is a consequence of the space-time geometry. However, taking gravity into account (as for, instance, in the study of neutron stars), most authors do not take into account the relation between hyperbolic geometry and spin and derive an Einstein equation which implicitly takes into account only boson degrees of freedom. In this work we introduce a consistent quantum general relativistic formalism which allows us to study the effects of the existence of fermion degrees of freedom. (author)

Einstein equations and Fermion degrees of freedom

Energy Technology Data Exchange (ETDEWEB)

Luetz, E.F.; Vasconcellos, C.A.Z. [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Inst. de Fisica

2001-07-01

When Dirac derived the special relativistic quantum equation which brings his name, it became evident that the spin is a consequence of the space-time geometry. However, taking gravity into account (as for, instance, in the study of neutron stars), most authors do not take into account the relation between hyperbolic geometry and spin and derive an Einstein equation which implicitly takes into account only boson degrees of freedom. In this work we introduce a consistent quantum general relativistic formalism which allows us to study the effects of the existence of fermion degrees of freedom. (author)

The DNP/MPH Dual Degree: An Innovative Graduate Education Program for Advanced Public Health Nursing.

Science.gov (United States)

Shaw, Kathy; Harpin, Scott; Steinke, Geraldine; Stember, Marilyn; Krajicek, Marilyn

2017-03-01

Strong professional priorities, evolving Affordable Care Act requirements, and a significantly limited public health nursing workforce prompted the University of Colorado College of Nursing to collaborate with the School of Public Health to implement one of the first Doctor of Nursing Practice/Master of Public Health dual degree programs in the nation. Federal grant funding supported the development, implementation, and evaluation of this unique post-baccalaureate dual degree program, for which there were no roadmaps, models, or best practices to follow. Several key issues emerged that serve as lessons learned in creating a new, novel higher education pathway for Advanced Public Health Nursing. This paper highlights two of those: (1) marketing, admission, and matriculation across two programs, and (2) enhancing curricula through distance coursework and interprofessional education. When collaboration with a school of public health is possible, the Doctor of Nursing Practice/Master of Public Health dual degree is an efficient way to prepare public health nurses' with the highest level of public health knowledge, practice, and leadership expertise. © 2016 Wiley Periodicals, Inc.

Effect of Crystallisation Degree on Hardness of Basaltic Glass-Ceramics

DEFF Research Database (Denmark)

Jensen, Martin; Smedskjær, Morten Mattrup; Yue, Yuanzheng

The dependence of hardness of basaltic glass-ceramics on their crystallisation degree has been explored by means of differential scanning calorimetry, optical microscopy, X-ray diffraction, and Vickers indentation. Different degrees of crystallisation in the basaltic glasses have been obtained...... by varying the temperature of heat treatment. The change of the relative degree of crystallisation with the heat treatment temperature can be described by an empirical model established in this work. The predominant crystalline phase in the glass has been identified as the pyroxene augite. The hardness...... principle calculations. It is found that the hardness of the glass phase decreases slightly with an increase in the degree of crystallisation, while that of the augite phase drastically decreases....

Quantifying Degree of Mastitis from Common Trends in a Panel of Indicators for Mastitis in Dairy Cows

DEFF Research Database (Denmark)

Højsgaard, S; Friggens, N C

2010-01-01

for such data and a corresponding method for estimating the DOI from a panel of indicators. An empirical proof of concept is provided. Using DOI, there was a significant difference between the DOI of mastitic and healthy control cows beginning 5 d before the mastitic cows were treated for mastitis.......This paper has 2 objectives. First, it argues that it is beneficial to regard degree of infection with respect to mastitis as a latent quantity varying continuously from 0 (truly healthy) to 1 (full-blown clinical mastitis). This quantity is denoted as degree of infection (DOI). The DOI is based...

Degree distribution of shortest path trees and bias of network sampling algorithms

NARCIS (Netherlands)

Bhamidi, S.; Goodman, J.A.; Hofstad, van der R.W.; Komjáthy, J.

2015-01-01

In this article, we explicitly derive the limiting degree distribution of the shortest path tree from a single source on various random network models with edge weights. We determine the asymptotics of the degree distribution for large degrees of this tree and compare it to the degree distribution

Evaluating the level of degree programmes in higher education: Conceptual design

NARCIS (Netherlands)

Rexwinkel, G.B.; Haenen, J.P.P.; Pilot, A.

2013-01-01

Evaluating the level of degree programmes became crucial with the Bologna Agreement in 1999 when European ministers agreed to implement common bachelor’s and master’s degree programmes and a common system of quality assurance. The European Quality Assurance system demands evaluation of the degree

PER PhDs & Bachelor's Degrees

Science.gov (United States)

White, Susan C.

2017-01-01

Recently, the editor remarked to me that physics departments that offered a PhD with a specialization in Physics Education Research (PER) seemed to graduate more bachelor's degree recipients than those physics PhD departments that did not have the specialization. I was not convinced. That led to quite a bit of discussion between us. He compiled a…

Persistence of Women in Online Degree-Completion Programs

Directory of Open Access Journals (Sweden)

Terry Müller

2008-06-01

Full Text Available Although online courses at postsecondary institutions promise adults access, flexibility, and convenience, many barriers to online learning remain. This article presents findings from a qualitative case study, which explored the phenomenon of undergraduate and graduate women learners’ persistence in online degree-completion programs at a college in the Northeast of the United States. Research questions asked why women learners persisted or failed to persist, and how factors supporting or hindering persistence influenced learners. Interviews with a purposeful sample of 20 participants revealed the complexity of variables affecting learners’ persistence to graduation. Findings suggested that multiple responsibilities, insufficient interaction with faculty, technology, and coursework ranked highest as barriers to women’s persistence. Strong motivation to complete degrees, engagement in the learning community, and appreciation for the convenience of an online degree-completion option facilitated persistence.