WorldWideScience

Sample records for shop bench cupboard

  1. 41 CFR 109-27.5005 - Shop, bench, cupboard or site stock.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Shop, bench, cupboard or site stock. 109-27.5005 Section 109-27.5005 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF ENERGY PROPERTY MANAGEMENT REGULATIONS SUPPLY AND...

  2. Machine Shop I. Learning Activity Packets (LAPs). Section C--Hand and Bench Work.

    Science.gov (United States)

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains two learning activity packets (LAPs) for the "hand and bench work" instructional area of a Machine Shop I course. The two LAPs cover the following topics: hand and bench work and pedestal grinder. Each LAP contains a cover sheet that describes its purpose, an introduction, and the tasks included in the LAP;…

  3. When are fume-cupboards necessary in hospital radioisotope laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Birks, J L [Singleton Hospital, Swansea (UK)

    1976-06-01

    Suggestions are made for procedures likely to require the provision of efficient fume-cupboards in hospital radioisotope laboratories. All such departments undertaking in vivo radioisotope procedures will require a supply of sterile materials, but only some of these will also require a fume-cupboard, since the use of a relatively inexpensive aseptic cabinet, without air flow and exhaust system, may suffice for such procedures as the labelling of blood cells or plasma. Efficient fume-cupboards may be required in hospital laboratories that are routinely concerned with the elution of generators of isotopes such as /sup 99/Tcsup(m) and /sup 113/Insup(m), the sterilization of radiopharmaceuticals (e.g. technetium-sulphur colloid) requiring the use of a pressure cooker, and the storage and handling of therapeutic quantities of /sup 131/I. Copious general ventilation of isotope rooms may be preferable to the too frequent incorporation of unnecessary fume-cupboards.

  4. [Secure cupboards, an advantage for the medicine use pathway].

    Science.gov (United States)

    Leclercq, Amandine; Foqué, Carole

    2016-05-01

    At Valenciennes general hospital, for some patients, the medicine use pathway is made secure through the use of computer systems which ensure named-patient daily dispensing. Secure cupboards are a complement to this main pathway. Copyright © 2016. Publié par Elsevier Masson SAS.

  5. Machine Shop Fundamentals: Part I.

    Science.gov (United States)

    Kelly, Michael G.; And Others

    These instructional materials were developed and designed for secondary and adult limited English proficient students enrolled in machine tool technology courses. Part 1 includes 24 lessons covering introduction, safety and shop rules, basic machine tools, basic machine operations, measurement, basic blueprint reading, layout, and bench tools.…

  6. Science Shops

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1999-01-01

    The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented.......The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented....

  7. Encounters on a Shape-changing Bench

    DEFF Research Database (Denmark)

    Kinch, Sofie; Grönvall, Erik; Petersen, Marianne Graves

    2014-01-01

    ; a concert hall, an airport and a shopping mall. We gathered insights from more than 120 people, as they unexpectedly encountered the shape changing capabilities of the bench. By taking the user tests out of the lab and into the wild, we explored the influence of context on the users experience of a shape...

  8. Internet Shopping

    Institute of Scientific and Technical Information of China (English)

    刘洪毓

    2004-01-01

    Nowadays you no longer need to walk round hundreds of shops looking for the items you need. You can shop for just about anything from your armchair. All you need is a computer and access(进入) to the Internet.

  9. Shopping Malls - ShoppingCenters

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Collected from a variety of sources both commercial and internal, this layer represents shopping center locations within Volusia County and is maintained by the...

  10. Window shopping

    OpenAIRE

    Oz Shy

    2013-01-01

    The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

  11. Omni channel fashion shopping

    NARCIS (Netherlands)

    Kemperman, A.D.A.M.; van Delft, L.; Borgers, A.W.J.; Pantano, E.

    2015-01-01

    This chapter gives insight into consumers' online and offline fashion shopping behavior, consumers' omni-channel usage during the shopping process, and consumer fashion shopper segments. Based on a literature review, omni-channel shopping behavior during the shopping process was operationalized.

  12. Practical job shop scheduling

    NARCIS (Netherlands)

    Schutten, Johannes M.J.

    1998-01-01

    The Shifting Bottleneck procedure is an intuitive and reasonably good approximation algorithm for the notoriously difficult classical job shop scheduling problem. The principle of decomposing a classical job shop problem into a series of single-machine problems can also easily be applied to job shop

  13. Performance comparison of some evolutionary algorithms on job shop scheduling problems

    Science.gov (United States)

    Mishra, S. K.; Rao, C. S. P.

    2016-09-01

    Job Shop Scheduling as a state space search problem belonging to NP-hard category due to its complexity and combinational explosion of states. Several naturally inspire evolutionary methods have been developed to solve Job Shop Scheduling Problems. In this paper the evolutionary methods namely Particles Swarm Optimization, Artificial Intelligence, Invasive Weed Optimization, Bacterial Foraging Optimization, Music Based Harmony Search Algorithms are applied and find tuned to model and solve Job Shop Scheduling Problems. To compare about 250 Bench Mark instances have been used to evaluate the performance of these algorithms. The capabilities of each these algorithms in solving Job Shop Scheduling Problems are outlined.

  14. Calibration bench of flowmeters

    International Nuclear Information System (INIS)

    Bremond, J.; Da Costa, D.; Calvet, A.; Vieuxmaire, C.

    1966-01-01

    This equipment is devoted to the comparison of signals from two turbines installed in the Cabri experimental loop. The signal is compared to the standard turbine. The characteristics and the performance of the calibration bench are presented. (A.L.B.)

  15. Planning continuity and the actual conditions of shopping malls.

    Science.gov (United States)

    Morita, Yoshitsugu; Tahara, Manabu

    2004-11-01

    The main purpose of this study is to investigate the continuity of the planning of shopping malls in downtown areas of Japan and to look into the tendencies of the current existing malls until today. This paper is a summary of a survey conducted on the actual conditions of current shopping malls and a questionnaire administered to local governments in the survey areas. The results of this study allow us to summarize the reasons for and changes caused by renewal efforts directed toward the streets, public spaces, and urban elements (pavement, bench, streetlight, arcade, sculpture, etc.) in shopping malls. Furthermore, these results also help us to understand the scale of the renewal efforts as well as their timing in relation to when the shopping mall was originally constructed.

  16. Supporting shop floor intelligence

    DEFF Research Database (Denmark)

    Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

    1999-01-01

    Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become r......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

  17. Online Shopping Behavior

    OpenAIRE

    Shahzad, Hashim

    2015-01-01

    Online shopping is a very much developed phenomena in Scandinavian countries. Different online factors impact online consumers’ behavior differently depending on the environment of different regions. Sweden is one of the developed and technologically advanced countries. To see the impact of different factors on consumers’ online shopping behavior, the purpose of this study is to analyse the factors that influence consumers’ online shopping behavior in Sweden’s context. One of the objectives o...

  18. Power Service Shops

    Data.gov (United States)

    Federal Laboratory Consortium — TVA's Power Service Shops provides expert repair and maintenance of power system components and large industrial equipment. With world-class maintenance facilities...

  19. Technicians and Shop Owners

    Science.gov (United States)

    Overview page provides information for shops and technicians that repair or service motor vehicle air-conditioning systems, including information on proper training, approved equipment, and regulatory practices.

  20. Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

    Science.gov (United States)

    Serfas, Benjamin G; Büttner, Oliver B; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

  1. Machine Shop Lathes.

    Science.gov (United States)

    Dunn, James

    This guide, the second in a series of five machine shop curriculum manuals, was designed for use in machine shop courses in Oklahoma. The purpose of the manual is to equip students with basic knowledge and skills that will enable them to enter the machine trade at the machine-operator level. The curriculum is designed so that it can be used in…

  2. Hybrid job shop scheduling

    NARCIS (Netherlands)

    Schutten, Johannes M.J.

    1995-01-01

    We consider the problem of scheduling jobs in a hybrid job shop. We use the term 'hybrid' to indicate that we consider a lot of extensions of the classic job shop, such as transportation times, multiple resources, and setup times. The Shifting Bottleneck procedure can be generalized to deal with

  3. Astrophysics on the Lab Bench

    Science.gov (United States)

    Hughes, Stephen W.

    2010-01-01

    In this article some basic laboratory bench experiments are described that are useful for teaching high school students some of the basic principles of stellar astrophysics. For example, in one experiment, students slam a plastic water-filled bottle down onto a bench, ejecting water towards the ceiling, illustrating the physics associated with a…

  4. Online shopping hesitation.

    Science.gov (United States)

    Cho, Chang-Hoan; Kang, Jaewon; Cheon, Hongsik John

    2006-06-01

    This study was designed to understand which factors influence consumer hesitation or delay in online product purchases. The study examined four groups of variables (i.e., consumer characteristics, contextual factors perceived uncertainty factors, and medium/channel innovation factors) that predict three types of online shopping hesitation (i.e., overall hesitation, shopping cart abandonment, and hesitation at the final payment stage). We found that different sets of delay factors are related to different aspects of online shopping hesitation. The study concludes with suggestion for various delay-reduction devices to help consumers close their online decision hesitation.

  5. Shopping in discount stores

    DEFF Research Database (Denmark)

    Zielke, Stephan

    2014-01-01

    quarters of intentions to shop in discount stores. Value perception has the strongest total effect, which is partly mediated by enjoyment, shame and guilt. Attributions influence the shopping intention indirectly via value perception and emotions. The inferior quality attribution has the strongest total......This paper analyzes the impact of price-related attributions, emotions and value perception on the intention to shop at grocery discounters in an integrated framework. Moderating effects of price consciousness are also analyzed. The results show that the proposed model explains almost three...... effect, followed by the efficiency of the business model attribution. The unfairness to stakeholders and the tricks in price communication attribution mostly influence the shopping intention for less price-conscious customers....

  6. Space Odyssey Gift Shop

    Science.gov (United States)

    2000-01-01

    The Space Odyssey Gift Shop located in StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., offers every visitor the opportunity to go home with 'the right stuff' from his or her StenniSphere visit. The gift shop is located just inside the front doors to StenniSphere and offers a wide range of space-related apparel, memorabilia, toys, books, mission patches and more.

  7. Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

    Science.gov (United States)

    Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

  8. Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

    Directory of Open Access Journals (Sweden)

    Benjamin G Serfas

    Full Text Available The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

  9. Retail Shopping Lists

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2012-01-01

    categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

  10. Binjai Shopping Mall : Arsitektur Metafora

    OpenAIRE

    Abadsyah, Haris

    2014-01-01

    City of Binjai have a potential to increase economic growth, especially in the field of trade and services.It can be seen from appearance of the commercial building like the shopping center ( Binjai Super Mall, Ramayana and Suzuya ) Construction of Binjai Shopping Mall intended for planning new shopping centers that provide public kebuthan in Binjai and well planned shopping center with optimal processing space and create a comfortable and pleasant atmosphere. In addition, the ...

  11. Machine Shop Grinding Machines.

    Science.gov (United States)

    Dunn, James

    This curriculum manual is one in a series of machine shop curriculum manuals intended for use in full-time secondary and postsecondary classes, as well as part-time adult classes. The curriculum can also be adapted to open-entry, open-exit programs. Its purpose is to equip students with basic knowledge and skills that will enable them to enter the…

  12. Proportionate Flow Shop Games

    NARCIS (Netherlands)

    Estevez Fernandez, M.A.; Mosquera, M.A.; Borm, P.E.M.; Hamers, H.J.M.

    2006-01-01

    In a proportionate flow shop problem several jobs have to be processed through a fixed sequence of machines and the processing time of each job is equal on all machines.By identifying jobs with agents, whose costs linearly depend on the completion time of their jobs, and assuming an initial

  13. Female Consumers Recreational Shopping Experiences

    Directory of Open Access Journals (Sweden)

    Sarbjot Singh

    2013-04-01

    Full Text Available The study examines the core meaning of intrinsic shopping to understand their experimental aspects of recreational and leisure shopping. The study focus only on female shoppers of age group ranging from 25-30, and understand their mall experiences because this segment is newly transform into self dependent segment which have less social and familial liabilities and have enough enthusiasm to explore the world or their boundaries. The Grounded theory use for identification of recreational shopping themes which are (a seeking experiences and (b experimental shopping and each have respective sub themes. The themes are connected to the key idea that shoppers are motivated by their expectations and desires. The study uses social constructivism to find and understand the shopper meanings in real terms rather than imposing and judgment on them. The findings described the way people do recreational shopping and how shopping malls use as leisure space and become facilitators of recreational shopping activities. Females use malls to fulfill their recreational and leisure shopping experiences as this is the great way of enjoying shopping for females of small towns. In malls females not only enjoy product experiences but services experiences also which makes their shopping interesting. The way the female of this age category use malls help the marketers and retailers to understand this segment shopping patterns.

  14. CERN Shop Christmas Sale

    CERN Multimedia

    Visits & Exhibition Service/ETT-VE

    2001-01-01

    11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

  15. Comparison Shopping Agents and Czech Online Customers’ Shopping Behaviour

    Directory of Open Access Journals (Sweden)

    Pilik Michal

    2016-12-01

    Full Text Available The internet has changed the lifestyles and shopping behaviours of customers. Online purchasing enables people to obtain information about products and services provided more effectively and easily, with the result that home shopping has become ordinary and usual. This paper presents part of a research focusing on online shopping customers’ behaviour in the Czech Republic. The article pertains to comparison shopping agents (CPAs, a tool which provides information to customers and helps find the best offer. The research was conducted on the basis of an online questionnaire available on an internet web page. The main results confirmed a dependency between online purchasing and the use of shopping agents, which are very popular in the Czech Republic. Almost two-thirds of online shoppers use CPAs when they engage in internet shopping. The final part of the paper addresses references and customers’ reviews as an important factor for the selection of online retailer.

  16. CERN SHOP CHRISTMAS SALE

    CERN Multimedia

    Visits & Exhibition Service

    2000-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

  17. Online Shopping: Advantages over the Offline Alternative

    OpenAIRE

    Dr Joshua Chang

    2003-01-01

    The advent of the Internet as a shopping medium has enabled shoppers to gain shopping benefits such as convenience and time-saving, better information, and price savings. This paper aims to provide a better understanding of the benefits of Internet shopping by identifying and discussing the advantages of Internet shopping over traditional storefront shopping.

  18. Online Shopping In The UK

    OpenAIRE

    K. K. Ramachandran; K. K. Karthick; M. Saravana Kumar

    2011-01-01

    This paper will contribute to current academic literature in the area of online retailing and consumer behaviour. Our research outlines a survey conducted with respondents from the UK to ascertain their attitudes to grocery shopping both off and online. The findings indicate that, whilst the vast majority of our sample has experience of online shopping, few actively engage in online grocery shopping. Some of the reasons for this are highlighted and the key issues relate to consumer trust and ...

  19. Shopping Online Sebagai Gaya Hidup

    OpenAIRE

    Lestari, Sri Budi

    2015-01-01

    The use of internet communication technology can make the world as if in one hand makes electronicbusiness with the concept of Online Shopping at its peak in recent years along with the development ofcommunication technologies over theInternet.How to shop online by using the internet through computers andmobile devices is increasingly popular smartphone can even be said to have become a trend today.Variousconvenience of shopping be the main thing to offer, with enough gadgets available in the...

  20. SHOPPING ONLINE SEBAGAI GAYA HIDUP

    OpenAIRE

    Sri Budi Lestari

    2016-01-01

    The use of internet communication technology can make the world as if in one hand makes electronic business with the concept of Online Shopping at its peak in recent years along with the development of communication technologies over theInternet.How to shop online by using the internet through computers and mobile devices is increasingly popular smartphone can even be said to have become a trend today.Various convenience of shopping be the main thing to offer, with enough gadgets ...

  1. Online Shopping Woes

    Institute of Scientific and Technical Information of China (English)

    Hou Weili

    2011-01-01

    AS a frequent online shopper,Zhou Fangjie,a 28-year-old white-collar worker,was annoyed when she could not open Hanyidushe,an online shop selling Korean-style clothing on Taobao Mall.Her experience resulted from the online protest initiated by small vendors on Taobao Mall,China's largest business to consumer online platform.Thousands of small vendors started the protest against larger established vendors by discrediting them through False orders,forming an anti-Taobao Union and setting up a chat room to devise ways to disrupt operations on Taobao Mall.

  2. Machine shop basics

    CERN Document Server

    Miller, Rex

    2004-01-01

    Use the right tool the right wayHere, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job.Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, T

  3. Engaging the Shopping Experience

    DEFF Research Database (Denmark)

    Sørensen, Sanne Dollerup

    The revenues in brick-and-mortar stores have declined in the last decade, not least due to competition from online shopping. This thesis investigates how traditional stores might use principles from experience design to reverse this tendency. Brick-and-mortar stores are very important...... the interest in brick-and-mortar stores by engaging the customers emotionally. This thesis suggests that using insights from Possible World Theory in designing stores is one way to do this. Theoretically the thesis is interdisciplinary by drawing on knowledge from a wide spectrum of fields such as consumer...

  4. Reception Shop Special Stand

    CERN Multimedia

    Education and Technology Transfer Unit/ETT-EC

    2004-01-01

    Friday 15.10.2004 CERN 50th Anniversary articles will be sold in the Main Building, ground floor on Friday 15th October from 10h00 to 16h00. T-shirt, (S, M, L, XL) 20.- K-way (M, L, XL) 20.- Silk tie (2 models) 30.- Einstein tie 45.- Umbrella 20.- Caran d'Ache pen 5.- 50th Anniversary Pen 5.- Kit of Cartoon Album & Crayons 10.- All the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.00 hrs. Education and Technology Transfer Unit/ETT-EC

  5. Coffee Shop Youth Lifestyle

    Directory of Open Access Journals (Sweden)

    Vahid Shalchi

    2008-04-01

    Full Text Available This article has a review on the third zone coffee shop youth life style and looks forward to note the features of this group’s life style. Some of the other objective of this article are notifying the importance of different elements in life, consumption norms and the types of leisure. The results of this research shows that in this social atmosphere, post modern lifestyle features are seen as fashion, hybrid taste, interaction among local and global affairs, the importance of hobbies, consumption and the necessity of leisure. The study on this group of Iranian youth foretells how difficult. Complicated and fragile cultural policy is. Therefore, cultural affecting on the youth generation is not possible only through addrssing the values in surface.

  6. Buying cannabis in 'coffee shops'.

    Science.gov (United States)

    Monshouwer, Karin; Van Laar, Margriet; Vollebergh, Wilma A

    2011-03-01

    The key objective of Dutch cannabis policy is to prevent and limit the risks of cannabis consumption for users, their direct environment and society ('harm reduction'). This paper will focus on the tolerated sale of cannabis in 'coffee shops'. We give a brief overview of Dutch policy on coffee shops, its history and recent developments. Furthermore, we present epidemiological data that may be indicative of the effects of the coffee shop policy on cannabis and other drug use. Dutch coffee shop policy has become more restrictive in recent years and the number of coffee shops has decreased. Cannabis prevalence rates in the adult population are somewhat below the European average; the rate is relatively high among adolescents; and age of first use appears to be low. On a European level, the use of hard drugs in both the Dutch adult and adolescent population is average to low (except for ecstasy among adults). International comparisons do not suggest a strong, upward effect of the coffee shop system on levels of cannabis use, although prevalence rates among Dutch adolescents give rise to concern. Furthermore, the coffee shop system appears to be successful in separating the hard and soft drugs markets. Nevertheless, in recent years, issues concerning the involvement of organised crime and the public nuisance related to drug tourism have given rise to several restrictive measures on the local level and have sparked a political debate on the reform of Dutch drug policy. © 2011 Trimbos Institute.

  7. Gold-decorated shopping centre; Golddekoriertes Shopping Center

    Energy Technology Data Exchange (ETDEWEB)

    Altmannshofer, Robert

    2010-11-15

    In the autumn 2009, the German quality seal sustainable construction for commercial new buildings was introduced. Thus, owners and operators of retail real estate and shopping centres can make clear their commitment in the matter of sustainability. The Ernst-August-Galerie (Hanover, Federal Republic of Germany) developed and operated by ECE Projektmanagement GmbH and Co. KG (Hamburg, Federal Republic of Germany) was a pilot project and also the first gold in one. With its around 150 shops, the Ernst-August-Galerie offers a supermarket, fashion outlets, a food court, service outlets and restaurants/cafes. The spacious and elegantly designed shopping mall with its piazzas and light-flooded rotundas exudes a Mediterranean air, making it a high-quality venue for shopping, strolling and leisure activities.

  8. Shopping Centres and Selected Aspects of Shopping Behaviour (Brno, the Czech Republic)

    Czech Academy of Sciences Publication Activity Database

    Kunc, J.; Tonev, P.; Szczyrba, Z.; Frantál, Bohumil

    2012-01-01

    Roč. 7, č. 2 (2012), s. 39-51 ISSN 2065-4421 Institutional support: RVO:68145535 Keywords : shopping centres * shopping habits * commuting to retail shops Subject RIV: AO - Sociology, Demography http://technicalgeography.org/pdf/2_2012/05_josef_kunc_petr_tonev_zdenek_szczyrba_bohumil_frantal_shopping_centres_and_selected_aspects_of_shopping_behaviour.pdf

  9. Process Waste Assessment - Paint Shop

    International Nuclear Information System (INIS)

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is open-quote Paint Shop wasteclose quotes -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so

  10. Shopping Mall to Study Hall.

    Science.gov (United States)

    Rittner-Heir, Robbin M.

    1999-01-01

    Discusses how the Burnsville (Minnesota) expanded its high school classroom space by buying a shopping mall and converting it into classrooms. Renovation costs and classroom layout are briefly discussed; a floor plan is included. (GR)

  11. Vape Shop Employees: Public Health Advocates?

    OpenAIRE

    Hart, Joy L; Walker, Kandi L; Sears, Clara G; Lee, Alexander S; Smith, Courteney; Siu, Allison; Keith, Rachel; Ridner, S. Lee

    2017-01-01

    INTRODUCTION E-cigarettes have increased in popularity and given rise to a new type of sales outlet?the vape shop. Expanding on work examining vape shop employee e-cigarette and tobacco attitudes and behaviors 1 , this study examined key messages that vape shop employees communicate to customers. METHODS Using informal interviews, observations, and a cross-sectional survey, we examined vape shop employees? (n=16) perceptions and e-cigarette use. Data were collected in nine vape shops in Louis...

  12. Hedonic Motivations for Online Shopping

    OpenAIRE

    Pui-Lai To; E-Ping Sung

    2014-01-01

    The purpose of this study is to investigate hedonic online shopping motivations. A qualitative analysis was conducted to explore the factors influencing online hedonic shopping motivations. The results of the study indicate that traditional hedonic values, consisting of social, role, self-gratification, learning trends, pleasure of bargaining, stimulation, diversion, status, and adventure, and dimensions of flow theory, consisting of control, curiosity, enjoyment, and telepresence, exist in t...

  13. ATTITUDES TOWARD ONLINE SHOPPING FROM THE ASPECTS OF PERSONAL CHARACTERISTICS AND SHOPPING MOTIVE THROUGH A DEVELOPING CONCEPT: PRIVATE SHOPPING

    OpenAIRE

    BAYBARS, Miray; USTUNDAGLI, Elif

    2011-01-01

    Private shopping is one of the concepts that serve as a members-only online shopping platform with deep discounts and well-known brands. The aim of this paper is to determine whether consumers’ need for uniqueness and innovativeness as a personal trait and price discount orientation affect consumer attitudes toward private shopping and their purchase decision or not. Research results revealed that need for uniqueness and innovativeness affect positive attitudes towards private shopping positi...

  14. Consumer protection and internet shopping

    OpenAIRE

    Blažková, Lenka

    2010-01-01

    The diploma thesis is devoted to the issue of online shopping. Its aim is to analyze internet shopping and see the rights and obligations of consumers and sellers, which are based on current legislation. The thesis is divided into two parts. The theoretical part deals with purchase over the internet and its regulations. There are explained the concepts internet, e-business and e-commerce and indicate the types of e-business and is mentioned certification of online stores. The practical part i...

  15. Price learning during grocery shopping

    DEFF Research Database (Denmark)

    Jensen, Birger Boutrup

    Many attempts have been made to measure consumers' price knowledge for groceries. However, the results have varied considerably and conflict with results of reference price research. This is the first study to examine price knowledge before, during, and after store visit, thus enabling a study...... of what consumers learn about prices during grocery shopping. Three measures of price knowledge corresponding to different levels of price information processing were applied. Results indicate that price learning does take place and that episodic price knowledge after store exit is far more widespread...... than expected. Consequently, a new view of how consumer price knowledge evolves during grocery shopping is presented....

  16. Multiattribute shopping models and ridge regression analysis

    NARCIS (Netherlands)

    Timmermans, H.J.P.

    1981-01-01

    Policy decisions regarding retailing facilities essentially involve multiple attributes of shopping centres. If mathematical shopping models are to contribute to these decision processes, their structure should reflect the multiattribute character of retailing planning. Examination of existing

  17. Retailing and Shopping on the Internet.

    Science.gov (United States)

    Rowley, Jennifer

    1996-01-01

    Internet advertising and commercial activity are increasing. This article examines challenges facing the retail industry on the Internet: location; comparison shopping; security, especially financial transactions; customer base and profile; nature of the shopping experience; and legal and marketplace controls. (PEN)

  18. Dynamic Support of Government in Online Shopping

    OpenAIRE

    Hai, Le Chi; Alam Kazmi, Syed Hasnain

    2015-01-01

    Advancements in online shopping for consumers requires consistent government support policies and the introduction of substantial government laws and regulations. In order to establish innovative developments in online shopping market environment that makes online shopping faster and stable, the government perspective is vital with the Technology Acceptance Model (TAM) for research and development in online shopping behavior for consumer’s confidence and their purchase intention. The proposed...

  19. Marketing plan for a web shop business

    OpenAIRE

    Koskivaara, Leonilla

    2014-01-01

    Internet has changed the buying behavior of consumers during the past years and companies need to adapt to the changes. Web shop business is an important sales channel of today’s companies. Advantages of a web shop business include cost effectiveness and potential to do business globally. Challenges of a web shop business include search engine optimization and running both, a retail store and a web shop at the same time. Social media has become an important marketing channel and has bec...

  20. Handbook for Trade and Industrial Shop Teachers.

    Science.gov (United States)

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This handbook is intended to help teachers of pre-employment shop courses in organizing and delivering instruction in both the shop and classroom. Addressed in the guide are the following topics: the instructor's place in the local school organization; the instructor's job (objectives, advisory committees, occupational analysis, shop/classroom and…

  1. The Shopping Mall: A Teenager Hangout.

    Science.gov (United States)

    Anthony, Kathryn H.

    1985-01-01

    Investigated teenagers' use of the shopping mall as a "hangout" through interviews with 51 adolescents using the mall, and 10 hours of behavioral observations. Results indicated that many teenagers visit the shopping center regularly to watch members of the opposite sex, play video games, see friends, shop, and people-watch. (Author/NRB)

  2. CERN Shop - Christmas Sale in Bldg. 33

    CERN Multimedia

    PH Department

    Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

  3. CERN Shop - Christmas Sale in Bldg. 33

    CERN Multimedia

    PH Department

    2010-01-01

    Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

  4. Kinect sensing of shopping related actions

    NARCIS (Netherlands)

    Popa, M.; Koc, A.K.; Rothkrantz, L.J.M.; Shan, C.; Wiggers, P.

    2011-01-01

    Surveillance systems in shopping malls or supermarkets are usually used for detecting abnormal behavior. We used the distributed video cameras system to design digital shopping assistants which assess the behavior of customers while shopping, detect when they need assistance, and offer their support

  5. Shopping for a safer car

    Science.gov (United States)

    2010-01-01

    This brochure provides some helpful tips on what to look for when shopping for a safer car. Automakers are increasingly advertising the safety features of their cars. The problem is sorting out their claims and zeroing in on the safety features that ...

  6. English in the Garment Shops.

    Science.gov (United States)

    Verplaetse, Lorrie

    This text for limited-English-speaking workers in the garment industry consits of illustrated vocabulary words, grammar lessons, narratives or brief readings, and exercises on employment-related topics. The first section focuses on shop talk, including job-specific vocabulary, simple expressions and explanations, social language, seeking and…

  7. Customer experience with online shopping : what are the unique experiences customers seek from online shopping?

    OpenAIRE

    Jin, Daoyan

    2013-01-01

    Over the last decade, there has been a great change in consumers' shopping behavior along with technological change. Online shopping is the use of computer technology for better shopping performance. Retailers are busy in studying consumers' behavior to see their attitudes toward online shopping and to meet the demand of online shoppers. Due to my interest in online business, I have also decided to study about customers' attitudes toward online shopping and specifically regarding factors that...

  8. Influence of bench angle on upper extremity muscular activation during bench press exercise.

    Science.gov (United States)

    Lauver, Jakob D; Cayot, Trent E; Scheuermann, Barry W

    2016-01-01

    This study compared the muscular activation of the pectoralis major, anterior deltoid and triceps brachii during a free-weight barbell bench press performed at 0°, 30°, 45° and -15° bench angles. Fourteen healthy resistance trained males (age 21.4 ± 0.4 years) participated in this study. One set of six repetitions for each bench press conditions at 65% one repetition maximum were performed. Surface electromyography (sEMG) was utilised to examine the muscular activation of the selected muscles during the eccentric and concentric phases. In addition, each phase was subdivided into 25% contraction durations, resulting in four separate time points for comparison between bench conditions. The sEMG of upper pectoralis displayed no difference during any of the bench conditions when examining the complete concentric contraction, however differences during 26-50% contraction duration were found for both the 30° [122.5 ± 10.1% maximal voluntary isometric contraction (MVIC)] and 45° (124 ± 9.1% MVIC) bench condition, resulting in greater sEMG compared to horizontal (98.2 ± 5.4% MVIC) and -15 (96.1 ± 5.5% MVIC). The sEMG of lower pectoralis was greater during -15° (100.4 ± 5.7% MVIC), 30° (86.6 ± 4.8% MVIC) and horizontal (100.1 ± 5.2% MVIC) bench conditions compared to the 45° (71.9 ± 4.5% MVIC) for the whole concentric contraction. The results of this study support the use of a horizontal bench to achieve muscular activation of both the upper and lower heads of the pectoralis. However, a bench incline angle of 30° or 45° resulted in greater muscular activation during certain time points, suggesting that it is important to consider how muscular activation is affected at various time points when selecting bench press exercises.

  9. PENGARUH ATMOSFER PUSAT BELANJA PADA SHOPPING VALUE

    Directory of Open Access Journals (Sweden)

    Astrid Kusumowidagdo

    2015-11-01

    Full Text Available AbstractAt the moment, the creation of shopping environment design that provides certain sensation and experience become strategy of the shopping center. This research aims to find out about the influence of shopping center’s atmosphere towards shopping value. The formative factors of shopping centre’s atmosphere are architectural features, interior features and support facilities. The research begins with a focus group to adjust the indicators of the previous research to the present research’s object. The next stage of research is done with a multiple regression analysis. The research object is the atmosphere condition of Senayan City shopping center in Jakarta and the subjects are samples totaling to sixty people. The samples are visitors from the middle-class segment between the age of 18-35.The research finds that architectural features, interior features and support facilities collectively bring an influence towards shopping value in Senayan City Pusat belanja, wether partially, only interior features show the significant influence towards shopping value.Keywords: design, atmosphere, shopping centre, shopping value.AbstrakSaat ini penciptaan lingkungan belanja dengan yang memberikan sensasi dan pengalaman telah menjadi bagian dari strategi bisnis pusat belanja. Penelitian ini bertujuan untuk menelusuri pengaruh atmosfer pusat belanja terhadap shopping value. Atmosfer pusat belanja dibentuk oleh faktor-faktor yaitu fitur arsitektur, fitur interior dan fasilitas penunjang. Penelitian ini diawali dengan focus group untuk penentuan indikator yang tepat dan dilanjutkan dengan survey pada 60 orang dengan usia 18-35 tahun yang bersegmen menengah. Obyek penelitian adalahatmosfer dari pusat belanja Senayan City. Hasil penelitian menunjukkan terdapat hubungan dari faktor-faktor atmosfer pusat belanja secara serempak pada shopping value, sedangkan secara parsial hanya fitur interior yang memberikan pengaruh signifikan pada shopping value

  10. SP2Bench: A SPARQL Performance Benchmark

    Science.gov (United States)

    Schmidt, Michael; Hornung, Thomas; Meier, Michael; Pinkel, Christoph; Lausen, Georg

    A meaningful analysis and comparison of both existing storage schemes for RDF data and evaluation approaches for SPARQL queries necessitates a comprehensive and universal benchmark platform. We present SP2Bench, a publicly available, language-specific performance benchmark for the SPARQL query language. SP2Bench is settled in the DBLP scenario and comprises a data generator for creating arbitrarily large DBLP-like documents and a set of carefully designed benchmark queries. The generated documents mirror vital key characteristics and social-world distributions encountered in the original DBLP data set, while the queries implement meaningful requests on top of this data, covering a variety of SPARQL operator constellations and RDF access patterns. In this chapter, we discuss requirements and desiderata for SPARQL benchmarks and present the SP2Bench framework, including its data generator, benchmark queries and performance metrics.

  11. Test Bench Development for Femur Stability Assessment

    Directory of Open Access Journals (Sweden)

    Samuel SANCHEZ-CABALLERO

    2015-01-01

    Full Text Available This paper shows the design and development of a test bench for humanfemurs. The main uses of this test bench will run from artificial femurs comparisonwith real femurs, to join stability assessment after bone a fracture repair. Amongthis uses is specially designed for condylar fractures testing. The test bench isdeveloped from a self-made existing tensile/compression testing machine. Thedesign procedure is supported by a literature review about the bone mechanicalbehavior and composition generally and the knee joint performance and repairparticularly. On the basis of this review, the machine was designed to simulate theadduction and abduction movements of the joint. The magnitudes to be measuredare: the compression force, the bone displacement (vertical and the knee jointrotation

  12. The national hydrologic bench-mark network

    Science.gov (United States)

    Cobb, Ernest D.; Biesecker, J.E.

    1971-01-01

    The United States is undergoing a dramatic growth of population and demands on its natural resources. The effects are widespread and often produce significant alterations of the environment. The hydrologic bench-mark network was established to provide data on stream basins which are little affected by these changes. The network is made up of selected stream basins which are not expected to be significantly altered by man. Data obtained from these basins can be used to document natural changes in hydrologic characteristics with time, to provide a better understanding of the hydrologic structure of natural basins, and to provide a comparative base for studying the effects of man on the hydrologic environment. There are 57 bench-mark basins in 37 States. These basins are in areas having a wide variety of climate and topography. The bench-mark basins and the types of data collected in the basins are described.

  13. Online Shop System with Zencart

    OpenAIRE

    Uqbah Iqbal

    2016-01-01

    Written by Sabri Saifulsham and Syazwan Saifulsham, this book has eleven chapters that using quantitative research methodology to describes the three main components of success in building and managing online shops, namely the potential of products, obtain product and build and manage online stores. All three of these components are combined into a single system that can help anyone to build an online store even if no basic technical skills. The measures described also make it easy to use Zen...

  14. Design of online shopping system

    OpenAIRE

    Li, Yueyuan

    2011-01-01

    E-commerce is a kind of comprehensive activity of management automation, business information network and financial electronic technology. It is a kind of commercial activity accomplished through the information network in all kinds of business activities in the world. As a new marketing model, the emergence of online stores is an epoch-making revolution in the field of product circulation. The thesis focuses on a study of how to design a small online shopping system which is simple and f...

  15. Shopping Problems among High School Students

    Science.gov (United States)

    Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

    2010-01-01

    Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

  16. Shopping problems among high school students.

    Science.gov (United States)

    Grant, Jon E; Potenza, Marc N; Krishnan-Sarin, Suchitra; Cavallo, Dana A; Desai, Rani A

    2011-01-01

    Although shopping behavior among adolescents is normal, for some, the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. A large sample of high school students (n = 3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. The overall prevalence of problem shopping was 3.5% (95% CI, 2.93-4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. Copyright © 2011 Elsevier Inc. All rights reserved.

  17. Relationship of pectoralis major muscle size with bench press and bench throw performances.

    Science.gov (United States)

    Akagi, Ryota; Tohdoh, Yukihiro; Hirayama, Kuniaki; Kobayashi, Yuji

    2014-06-01

    This study examined the relationship of muscle size indices of the pectoralis major muscle with bench press and bench throw performances in 18 male collegiate athletes. The maximal cross-sectional area (MCSAMAx) and volume (MV) of the pectoralis major muscle were determined by magnetic resonance imaging. First, subjects were tested for their one repetition maximum bench press strength (1RMBP) using a Smith machine. At a later date, subjects performed bench throws using the Smith machine with several different loads ranging from 30.0 kg to 90% of 1RMBP. Barbell positions were measured by a linear position transducer, and bench throw power was calculated using a dynamic equation. Three trials were performed for each load. In all the trials, the maximal peak power was adopted as bench throw peak power (PPBT). The 1RMBP was significantly correlated with MCSAMAx. Similarly, the correlation coefficient between MV and PPBT was significant. In contrast to the y-intercept of the MV-PPBT regression line, that of the MCSAMAx-1RMBP regression line was not significantly different from 0. These results suggested that, although the dependence on pectoralis major muscle size is slightly different between bench press strength and bench throw power, the pectoralis major muscle size has a significant impact on bench press and throw performances. Greater muscle size leads to heavier body weight, which can be a negative factor in some sports. We therefore recommend that athletes and their coaches develop training programs for improving sports performance by balancing the advantage of increased muscle size and the potential disadvantage of increased body weight.

  18. Distal clavicular osteolysis in adults: association with bench pressing intensity

    International Nuclear Information System (INIS)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.

    2016-01-01

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  19. THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

    OpenAIRE

    Asnawati; Wahyuni S.

    2018-01-01

    This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829) > Ftable (2.669) which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant fa...

  20. NetBench. Automated Network Performance Testing

    CERN Document Server

    Cadeddu, Mattia

    2016-01-01

    In order to evaluate the operation of high performance routers, CERN has developed the NetBench software to run benchmarking tests by injecting various traffic patterns and observing the network devices behaviour in real-time. The tool features a modular design with a Python based console used to inject traffic and collect the results in a database, and a web user

  1. Stem Cell Transplantation from Bench to Bedside

    Indian Academy of Sciences (India)

    Table of contents. Stem Cell Transplantation from Bench to Bedside · Slide 2 · Slide 3 · Slide 4 · Principles of an allogeneic stem cell transplant · Principle of an allogeneic stem cell transplant · Principle of an autologous Stem Cell Transplant · Slide 8 · Conditioning · Slide 10 · Slide 11 · Stem Cell Transplantation · Slide 13.

  2. Mathematical Lens: How Much Can You Bench?

    Science.gov (United States)

    Bolognese, Chris A.

    2013-01-01

    "How Much Can You Bench?" appears in the "Mathematical Lens" section of "Mathematics Teacher." "Mathematical Lens" uses photographs as a springboard for mathematical inquiry and appears in every issue of "Mathematics Teacher." This month the mathematics behind the photograph includes finding areas…

  3. ESPRESSO optical bench: from mind to reality

    Science.gov (United States)

    Tenegi, F.; Santana, S.; Gómez, J.; Rodilla, E.; Hughes, I.; Mégevand, D.; Rebolo, R.; Riva, M.; Luis-Simoes, R.

    2016-07-01

    ESPRESSO [1] is a high-resolution spectrograph under development for the VLT telescope. In general, the Optical Bench (OB) structure can be considered as a 3D one, conformed by welding thin plates of Structural Steel (St-52) with a nickelplated surface treatment, combined for getting maximum stiffness and minimum weight, that will be finally re-machined to get stringent geometrical and dimensional tolerances at I/Fs positions. TIG conventional welding procedure has been selected to minimize the cost and facilitate the own welding process. This solution follows the inheritance from HARPS [2] due to its success to achieve the required performance for the bench. This paper contains an overview of the whole process of designing and manufacturing the Optical Bench of ESPRESSO, from the very first beginning with the specifications to the current status of the bench with its integration on the Spectrograph (including the Finite Element Models and the delivery of the final structure by the supplier) and lessons learned.

  4. Spontaneous pneumomediastinum after bench press training.

    Science.gov (United States)

    Nishino, Tomoya

    2017-04-01

    Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.

  5. Measuring consumer perceptions of online shopping convenience

    OpenAIRE

    Ferreira, Margarida Bernardo

    2016-01-01

    The aim of this master thesis is to identify which dimensions of convenience affect consumers’ intention of using online shopping. Also it explores a conceptual model to measuring consumer perceptions of online shopping convenience. This paper contains prospects about online consumer behavior, and the results have important implications for retailers, managers and marketers, related to online shopping strategies. An empirical investigation was carried out to test the hypotheses. In order t...

  6. Cellular Phone Users- Willingness to Shop Online

    OpenAIRE

    Norazah Mohd Suki; Norbayah Mohd Suki

    2009-01-01

    This study aims to identify cellular phone users- shopping motivating factors towards online shopping. 100 university students located in Klang Valley, Malaysia were involved as the respondents. They were required to complete a set of questionnaire and had to own a cellular phone in order to be selected as sample in this study. Three from five proposed hypotheses were supported: purchasing information, shopping utilities and service quality. As a result, marketers and retailers should concent...

  7. Determinants Of Online Shopping In Manado

    OpenAIRE

    Halim, Ellen

    2013-01-01

    Retailers utilize online media to reach more potential customers. Internet connects the retailer and customers without any geographic location boundaries. Internet growth has a positive impact for business world. There is a new shopping method in non-store shopping as people can buy products or services without having to travel to the outlets like traditional retail does. With the increase of online retailers on internet world, online shopping became popular. The objective of this research is...

  8. Reflexivity in performative science shop projects

    OpenAIRE

    Beunen, R.; Duineveld, M.; During, R.; Straver, G.H.M.B.; Aalvanger, A.

    2012-01-01

    Science shop research projects offer possibilities for universities to engage with communities. Many science shop projects directly or indirectly intend to empower certain marginalised groups or interests within a decision-making process. In this article we argue that it is important to reflect on the role and position the researchers have in these projects. We present three science shop projects to illustrate some of the dilemmas that may arise in relation to citizen empowerment, democracy, ...

  9. Passion and dependency in online shopping activities.

    Science.gov (United States)

    Wang, Chih-Chien; Yang, Hui-Wen

    2007-04-01

    This study examines the influence of harmonious passion (HP) and obsessive passion (OP) to online shopping dependency. The results show that both HP and OP might lead to online shopping dependency and online shoppers with OP are more dependent on online shopping activities. In addition, this study also found out that HP and OP could be denoted as a sequence of different intensities of passion, where HP might be a necessity of OP.

  10. CONSUMER BEHAVIOUR AND ATTITUDE TOWARDS ONLINE SHOPPING

    OpenAIRE

    S. Nethra; Dr. V. T. Dhanaraj

    2016-01-01

    The popularity of online shopping has caught the attention of many peoples. Many studies have been done in developed nations to know about the attitude and behaviour of consumers towards online shopping. The research is focused on consumer behaviour and attitude towards online shopping in Coimbatore district. The study is based on primary data which has been collected by issuing questionnaire to 200 respondents residing in Coimbatore district by adopting convenient sampling method. The stat...

  11. INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

    OpenAIRE

    Hermawan F.; Wijayanti S.H.

    2018-01-01

    This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the info...

  12. The influences of social e-shopping in enhancing young women’s online shopping behaviour

    OpenAIRE

    Dennis, C; Morgan, A; Wright, LT; Jayawardhena, C

    2010-01-01

    Copyright @ 2010 Westburn Publishers Ltd The background to this paper is that shoppers, particularly women, are motivated by a variety of different reasons, including socialising and enjoyment. Despite the growth of Internet retailing (e-retailing), these social needs are largely unmet in e-shopping. In the high street, women do most of the shopping but online shopping (e-shopping) tends to be dominated by male shoppers. At the same time, social networking is growing fast and is especially...

  13. INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

    Directory of Open Access Journals (Sweden)

    Hermawan F.

    2018-03-01

    Full Text Available This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the informative variable and communication have no influence on the customer's satisfaction online shopping.

  14. Designing electronic shops, persuading consumers to buy

    DEFF Research Database (Denmark)

    Dormann, Claire

    2000-01-01

    The purpose of this article is to show how to design persuasive and successful Web shops. An approach to commercial site design that draws on theories of visual persuasion is proposed. We focus on the role of emotion. Images in an ad are typically meant to create some emotional disposition toward....... To strengthen the discussion, an evaluation of shop home pages, situated within the perspective of visual persuasion is presented. This study has given some indications that viewers form distinctive emotional impressions from shop designs. Thus, by building on visual persuasion theories, we can learn how...... to design seductive Web shops....

  15. Social Sustainability of Shopping Streets in Ankara

    Directory of Open Access Journals (Sweden)

    Özge YALÇINER ERCOŞKUN

    2013-02-01

    Full Text Available Shopping streets are integral parts of public spaces in traditional shopping areas of Central Business Districts (CBD. Furthermore, as modern shopping venues, shopping centers offer advantages for modern lifestyles with spacious shopping areas, variety of commercial and social activities, and economic value of their investments. These advantages act in favor of shopping centers and improve the level of shopping street social sustainability and its relevant concepts. The aim of this study is to analyze the main shopping streets of Ankara, using the concepts of social sustainability. In this study, these concepts, such as locality, identity, vitality, viability, sense of place, conviviality, meaning and local characteristics of the shopping streets are investigated. For the first time, the retail unit locations in Ankara, their brands and their business types, are illustrated on thematic land use maps using Geographical Information Systems (GIS software. Next, population activities and consumer spatial behavior are observed and marked on maps that are also referred to as social sustainability maps. The results of the study can be useful in formulating strategies within the framework of social sustainability, which is a relatively new concept.

  16. RemBench: A Digital Workbench for Rembrandt Research

    NARCIS (Netherlands)

    Verberne, Suzan; Van Leeuwen, Rudie; Gerritsen, G.H.; Boves, Lou

    2016-01-01

    In this paper, we present RemBench, a search engine for research into the life and works of Rembrandt van Rijn. RemBench combines the data from four different databases behind one interface using federated search technology. Metadata filtering is enabled through faceted search. RemBench enables art

  17. Strategy of image management in retail shops

    Directory of Open Access Journals (Sweden)

    Sandra Soče Kraljević

    2007-12-01

    Full Text Available A sound positioning in consumers’ mind, along with strong promotion support, brought many retail shops to the top. This is mostly thanks to the image created in the consumers’ mind. A retail shop’s image may but need not conform to reality. Image often looks like a cliché. It overstates certain elements of the shop while simply omitting others. That is exactly why image is of great importance and often crucial to consumer behavior. This paper aims at determining the impact of image on customer behavior in the course of decision making about shopping and choosing a particular retail shop. Image is a significant factor of success of every company, hence also of a retail shops. It is a relatively strong value and a component of creating competitive advantage. But if we do not pay sufficient attention to image, it can become counterproductive. Instead to, like an additional value helps creating and maintaining the advantage in competition and realization of business aims, transforms into a limiting factor. Therefore, it is imperative to identify the elements of image that are of greatest importance to customers. Research has shown that customers choose the retail shop first and after that products and brands within this shop. When it comes to the supermarket, as a kind of retail shop, research has shown that two out of three shopping decisions are made by the customer on the spot, that is, without previous planning. That practically means that we can influence customers with different sales techniques. The paper suggests different strategies of image management for supermarkets and conventional shops. For supermarkets it is the “widest assortment” strategy, while for conventional shops the strategy is that of a “selected group of products“. Improvements to research methods will enable getting more information about customer behavior, while pressures of increased competition in the business environment will force retailers to get

  18. BENCH SCALE SALTSTONE PROCESS DEVELOPMENT MIXING STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Cozzi, A.; Hansen, E.

    2011-08-03

    The Savannah River National Laboratory (SRNL) was requested to develop a bench scale test facility, using a mixer, transfer pump, and transfer line to determine the impact of conveying the grout through the transfer lines to the vault on grout properties. Bench scale testing focused on the effect the transfer line has on the rheological property of the grout as it was processed through the transfer line. Rheological and other physical properties of grout samples were obtained prior to and after pumping through a transfer line. The Bench Scale Mixing Rig (BSMR) consisted of two mixing tanks, grout feed tank, transfer pump and transfer hose. The mixing tanks were used to batch the grout which was then transferred into the grout feed tank. The contents of the feed tank were then pumped through the transfer line (hose) using a progressive cavity pump. The grout flow rate and pump discharge pressure were monitored. Four sampling stations were located along the length of the transfer line at the 5, 105 and 205 feet past the transfer pump and at 305 feet, the discharge of the hose. Scaling between the full scale piping at Saltstone to bench scale testing at SRNL was performed by maintaining the same shear rate and total shear at the wall of the transfer line. The results of scaling down resulted in a shorter transfer line, a lower average velocity, the same transfer time and similar pressure drops. The condition of flow in the bench scale transfer line is laminar. The flow in the full scale pipe is in the transition region, but is more laminar than turbulent. The resulting plug in laminar flow in the bench scale results in a region of no-mixing. Hence mixing, or shearing, at the bench scale should be less than that observed in the full scale, where this plug is non existent due to the turbulent flow. The bench scale tests should be considered to be conservative due to the highly laminar condition of flow that exists. Two BSMR runs were performed. In both cases, wall

  19. Doctor shopping: a concept analysis.

    Science.gov (United States)

    Worley, Julie; Hall, Joanne M

    2012-01-01

    Prescription drug abuse is a significant problem in the United States that poses a serious health risk to Americans and is therefore significant to the field of nursing. The prescription drugs that are designated in the United States as having abuse potential are called controlled or scheduled drugs. The most common types of abused prescription drugs are benzodiazepines prescribed for anxiety, opioids prescribed for pain, and stimulants prescribed for attention deficit disorder. These prescription drugs are abused by taking larger doses than prescribed for nonmedical use to achieve a high or euphoric feeling, or are sold illicitly for profit. In 2009, there were 2.4 million nonmedical users of prescription opioids in the United States. These prescription drugs are often obtained by seeing multiple prescribers, often under false pretenses or with complicity from the prescribers that leads to abuse and illicit sales. The term doctor shopping has been used not only to refer to this phenomenon but has also had other meanings throughout the past decades. Thus, concept analysis is the focus of this article for clarification using the Walker and Avant method. Health implications and suggestions for minimizing doctor shopping are included.

  20. Flexible job shop scheduling problem in manufacturing

    OpenAIRE

    Curralo, Ana; Pereira, Ana I.; Barbosa, José; Leitão, Paulo

    2013-01-01

    This paper addresses a real assembly cell: the AIP-PRIMECA cell at the Université de Valenciennes et du Hainaut-Cambrésis, in France. This system can be viewed as a Flexible Job Shop, leading to the formulation of a Flexible Job Shop Scheduling Problem (FJSSP).

  1. Product Characteristics and Internet Shopping Intentions.

    Science.gov (United States)

    Vijayasarathy, Leo R.

    2002-01-01

    Discussion of electronic commerce and online marketing focuses on an empirical study that investigated differences between Internet shopping intentions for products categorized by cost and tangibility. Highlights include hypotheses; respondent characteristics; results that showed that intentions to shop using the Internet differ by tangibility of…

  2. Rental Values in UK Shopping Malls

    NARCIS (Netherlands)

    Yuo, Tony Shun-Te; Lizieri, Colin; McCann, Phillip; Crosby, Neil

    This paper employs a unique dataset to analyse the retail rental levels of 1108 retail tenants in 148 UK regional shopping malls. The dataset integrates information regarding the characteristics of the shopping centre, the individual retailer, the brand, the individual unit occupied, the tenancy

  3. Potential of Natural Ventilation in Shopping Centres

    DEFF Research Database (Denmark)

    Diederichsen, Alice; Friis, Kristina; Brohus, Henrik

    2008-01-01

    The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV) in shop......The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV......) in shopping centres with focus on both the achieved IEQ and energy consumptions for air movement. By thermal building simulations it is found that there exists an interesting potential for hybrid ventilation of shopping centres, which can lead to great savings in the electrical energy consumptions...

  4. Bench press exercise: the key points.

    Science.gov (United States)

    Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K

    2015-06-01

    The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.

  5. A PMT-Block test bench

    International Nuclear Information System (INIS)

    Adragna, P.; Antonaki, A.

    2006-01-01

    The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called PMT-Block. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a 3-in-1 card, which provides shaping, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterization are described in detail in this report. The results obtained in the test of about 10 000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported

  6. A PMT-Block test bench

    Energy Technology Data Exchange (ETDEWEB)

    Adragna, P [Dipartimento di Fisica ' E.Fermi' , Universita di Pisa and Istituto Nazionale di Fisica Nucleare, Sezione di Pisa, Largo B. Pontecorvo 3, Pisa 56127 (Italy); Universita degli studi di Siena, via Roma 56, 53100 Siena (Italy); Antonaki, A [Institute of Accelerating Systems and Applications, P.O. Box 17214, Athens 10024 (Greece); National Capodistrian University of Athens, 30 Panepistimiou st., Athens 10679 (Greece)] (and others)

    2006-08-01

    The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called PMT-Block. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a 3-in-1 card, which provides shaping, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterization are described in detail in this report. The results obtained in the test of about 10 000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported.

  7. Distal clavicular osteolysis in adults: association with bench pressing intensity

    Energy Technology Data Exchange (ETDEWEB)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)

    2016-11-15

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  8. THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

    Directory of Open Access Journals (Sweden)

    Asnawati

    2018-02-01

    Full Text Available This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829 > Ftable (2.669 which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant factor influencing Impulse Buying on the online-shopping purchase on Instagram.

  9. Branding on the Shop Floor

    Directory of Open Access Journals (Sweden)

    Szilvia Gyimóthy

    2010-09-01

    Full Text Available Service branding is a particular form of emotional management, where employees are regarded as adaptable media, who can be trained to convey corporate values while interacting with customers. This paper examines the identity work of butchers during the brand revitalisation campaign of Kvickly, a Danish supermarket chain. During the implementation of the “Best Butcher in Town”-project, Kvickly’s shop floor becomes an engineered servicescape where the norms of good salesmanship must be performed. By documenting the disloyal behaviour of butchers, we demonstrate that the affective commitment towards corporate brand values is closely related with self-enactment opportunities of occupational communities. Total service-orientation threatens butchers’ perception of autonomy and may therefore result in the emergence of resistant sub-cultures.

  10. 48 CFR 252.227-7033 - Rights in shop drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

  11. 48 CFR 1952.227-77 - Rights in shop drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

  12. Dimensions of Consumer's Perceived Risk in Online Shopping

    Institute of Scientific and Technical Information of China (English)

    YE Naiyi

    2004-01-01

    Perceived risk is an important concept in consumer behavior in online shopping. It impedes the adopting online shopping. A structure model with seven factors of consumer's perceived risk in online shopping is developed in this paper. The results have the descriptive power about Chinese consumers' perceived risk in Internet shopping and provide framework for managerial use in China's e-commerce market environment.

  13. Youth Clothes-Shopping Behavior: An Analysis by Gender.

    Science.gov (United States)

    Peters, John F.

    1989-01-01

    Explored possible gender differences in clothes-shopping behavior among adolescents. Findings from 387 college students revealed that: parents financially assisted sons and daughters equally; there was no gender difference in shopping frequency; mothers more frequently shopped with sons than with daughters; fathers rarely shopped with any…

  14. Consumers’ Attitude towards Online Shopping : Factors influencing Gotland consumers to shop online

    OpenAIRE

    Sultan, Muhammad Umar; Uddin, Md. Nasir

    2011-01-01

    In the era of globalization electronic marketing is a great revolution.  Over the last decade maximum business organizations are running with technological change.  Online shopping or marketing is the use of technology (i.e., computer) for better marketing performance. And retailers are devising strategies to meet the demand of online shoppers; they are busy in studying consumer behavior in the field of online shopping, to see the consumer attitudes towards online shopping. Therefore we have ...

  15. ShopComm: Community-Supported Online Shopping for Older Adults.

    Science.gov (United States)

    Gorkovenko, Katerina; Tigwell, Garreth W; Norrie, Christopher S; Waite, Miriam; Herron, Daniel

    2017-01-01

    The United Kingdom has an ageing population whose members experience significant life transitions as they grow older, for example, losing mobility due to deteriorating health. For these adults, digital technology has the potential to sustain their independence and improve their quality of life. However older adults can be reluctant to use digital solutions. In this paper, we review a local charity providing a grocery shopping service for older adults who are unable to go themselves. We explore how older adults perceive the benefits and drawbacks of both physical and digital shopping. Using these insights, we designed ShopComm to enable and support older adults with mobility impairments to shop online.

  16. Diagnostics at JINR LHEP photogun bench

    International Nuclear Information System (INIS)

    Nozdrin, M.A.; Balalykin, N.I.; Minashkin, V.F.; Shirkov, G.D.

    2016-01-01

    The photoinjector electron beam quality dramatically depends on the laser driver beam quality. For laser beam diagnostics a 'virtual cathode' system was realized at the JINR LHEP photogun bench. The system allows one to image laser beam profile at the cathode. The AVINE software complex developed in DESY Zeuthen is being used for imaging. Equipment for emittance measurement using the slit method was installed. The original emittance calculation software EmCa was created and tested with the laser beam.

  17. Job shop scheduling by local search

    NARCIS (Netherlands)

    Aarts, E.H.L.; Lenstra, J.K.; Laarhoven, van P.J.M.; Ulder, N.L.J.

    1992-01-01

    We present a computational performance analysis of local search algorithms for job shop scheduling. The algorithms under investigation are iterative improvement, simulated annealing, threshold accepting and genetic local search. Our study shows that simulated annealing performs best in the sense

  18. Public Relations Program for a Shopping Mall.

    Science.gov (United States)

    Feigley, David A.

    1980-01-01

    An account is given of a highly successful sports, health, and recreation exhibit run by Rutgers University (New Jersey) in a public shopping mall. Organization and entertainment were the keynotes of the success. (LH)

  19. Profiling the Shopping Behavior of Elderly Consumers.

    Science.gov (United States)

    Mason, J. Barry; Bearden, William O.

    1978-01-01

    Data were collected by personal interview on shopping roles, information processing, food stamp and coupon use, store brand purchases, mispricing and product unavailability experiences, and with familiarity with fair trade practices. Implications and directions for further research are suggested. (Author)

  20. The 3D virtual environment online for real shopping

    OpenAIRE

    Khalil, Nahla

    2015-01-01

    The development of information technology and Internet has led to rapidly progressed in e-commerce and online shopping, due to the convenience that they provide consumers. E-commerce and online shopping are still not able to fully replace onsite shopping. In contrast, conventional online shopping websites often cannot provide enough information about a product for the customer to make an informed decision before checkout. 3D virtual shopping environment show great potential for enhancing e-co...

  1. RURAL CUSTOMER SATISFACTION TOWARDS ONLINE SHOPPING IN POLLACHI TALUK

    OpenAIRE

    K. Jayaprakash; A. Pavithra

    2017-01-01

    Online shopping is a recent phenomenon in electronic commerce and its definitely going to be the future of shopping in the world. It is user friendly compare to in store shopping because consumers can just complete his requirements just with a click of mouse without leaving their home. In the present work, the researcher intended to analyze the most preferred online shopping website, factors influencing the rural customers towards online shopping and to analyze the level satisfaction of the ...

  2. Flow shop scheduling with heterogeneous workers

    OpenAIRE

    Benavides, Alexander J.; Ritt, Marcus; Miralles Insa, Cristóbal Javier

    2014-01-01

    We propose an extension to the flow shop scheduling problem named Heterogeneous Flow Shop Scheduling Problem (Het-FSSP), where two simultaneous issues have to be resolved: finding the best worker assignment to the workstations, and solving the corresponding scheduling problem. This problem is motivated by Sheltered Work centers for Disabled, whose main objective is the labor integration of persons with disabilities, an important aim not only for these centers but for any company d...

  3. A hybrid job-shop scheduling system

    Science.gov (United States)

    Hellingrath, Bernd; Robbach, Peter; Bayat-Sarmadi, Fahid; Marx, Andreas

    1992-01-01

    The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

  4. IS ONLINE GROCERY SHOPPING INCREASING IN STRENGTH?

    OpenAIRE

    Corbett, James J.

    2001-01-01

    Online grocery shopping is a relatively new innovation with regard to the way in which one purchases groceries. Some interesting concepts- designed to enhance the process of making grocery products available for consumption of the ever-changing consumer- have entered the food distribution industry channels. A telephone survey was conducted in the Boston trading area to determine the profile of online grocery consumers who are familiar with online grocery shopping.

  5. Chinese and Finnish Undergraduates’ Online Shopping Behaviour

    OpenAIRE

    Wan, Ning

    2015-01-01

    The main goal of the thesis was to recognise similar and different characteristics of online shopping behaviour between Chinese and Finnish undergraduates. Additionally, this thesis would give meaningful proposals for merchants and managers on offering better online marketing. This thesis report was conducted in both theoretical and practical parts. The theoretical parts include marketing research and online shopping consumption behaviour. The study describes the marketing research progre...

  6. Shopping online and/or in-store? A structural equation model of the relationships between e-shopping and in-store shopping

    OpenAIRE

    Farag, Sendy; Schwanen, Tim; Dijst, Martin

    2005-01-01

    Searching product information or buying goods online is becoming increasingly popular and could affect shopping trips. However, the relationship between e-shopping and in-store shopping is currently unclear. The aim of this study is to investigate empirically how the frequencies of online searching, online buying, and non-daily shopping trips relate to each other, after controlling for sociodemographic, land use, behavioral, and attitudinal characteristics. Data were collected from 826 respon...

  7. Comparison of Myoelectric Activity of a Selection of Upper Extremity Muscles while Doing Bench Press in Two Training Methods of TRX and Barbell Bench Press

    Directory of Open Access Journals (Sweden)

    Ahmad Reza Zibaei

    2016-12-01

    Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.

  8. Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

    NARCIS (Netherlands)

    Kosfeld, M.

    1999-01-01

    This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners

  9. Science Shops - a concept for community based learning

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Hende, Merete

    2001-01-01

    Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. The paper is based on an investigation of the impact of science shops on university curricula and research through a questionnaire...... sent out to science shops and through follow-up interviews with employees from nine different university based science shops. These science shops had in the questionnaire indicated that the science shop in one way or the other has had impact on university curricula and/or research. This paper focuses...... on the impact on university curricula. The case studies have been supplemented with articles and reports. The analysis has focused on the kind of impact, which the science shops have reported, and has tried to relate the impact to the local history of the science shop. One direct impact on the curricula...

  10. A Methodology for Reducing Bench Strength in Information Technology Companies

    Directory of Open Access Journals (Sweden)

    Boby John

    2015-07-01

    Full Text Available One of the major risks in information technology (IT project execution is the non-availability of resources with required skill sets to meet the project demands. To mitigate this risk, almost every IT organization maintains a portion of their resources on bench. The bench strength reduces the delay in starting the project due to the non-availability of skilled resources. But bench strength or buffer is cost to the company. A medium scale Indian IT company incurs around USD 142,347 monthly on maintaining the bench strength. Hence this study is undertaken to develop a methodology to reduce the bench strength in IT companies. The proposed methodology is to obtain an optimum mix of resources from bench and through recruitment to meet the demands at a minimum cost. This is done by formulating the problem as an integer programming problem. The problem aims to minimize the total cost of obtaining the skilled resources without violating the constraints on demand, bench strength availability and recruitment lead time. The problem can be solved using Microsoft excel solver function or any other optimization packages like CPLEX, Gurobi, etc. A case study on the application of proposed methodology is also discussed in the paper. The case study showed that the proposed methodology is superior to the existing practice of maintaining large bench strengths to meet the demands for resources with various skills.

  11. Supporting the Supermarket Shopping Experience through a Context-Aware Shopping Trolley

    DEFF Research Database (Denmark)

    Black, Darren; Clemmensen, Nils Jakob; Skov, Mikael B.

    2009-01-01

    Shopping in the real world is becoming an increasingly interactive experience as stores integrate various technologies to support shoppers. Based on an empirical study of supermarket shoppers, we designed a mobile context-aware system called the Context- Aware Shopping Trolley (CAST). The aim...... of the system is to support shopping in supermarkets through context-awareness and acquiring user attention. Thus, the interactive trolley guides and directs shoppers in the handling and finding of groceries. An empirical evaluation showed that shoppers using CAST adapted in different shopping behavior than...... traditional trolley shoppers by exhibiting a more uniform behavior in terms of product sequence collection and ease of finding products and thus, CAST supported the shopping experience....

  12. Geologic bench marks by terrestrial photography

    Science.gov (United States)

    Malde, Harold E.

    1973-01-01

    A photograph made with a level camera, if taken at a known height above a permanent mark on the ground, can be later repeated with exactness for measurement of changes in terrain. Such a photograph is one of several means for establishing a geologic bench mark and is especially useful for monitoring the subtle qualities of a landscape that are otherwise hard to map and describe, including the effects of man's use. Moreover, the geometry of such a photograph provides the same angular measurements between objects as can be made with a transit. A measurement of distance on a single photograph, however, requires control points. These can be surveyed at any convenient time, not necessarily when the initial photograph is made. Distances can also be determined by simple stereophotography from a base line of suitable length.

  13. Urban artisanal gold shops and mercury emissions

    International Nuclear Information System (INIS)

    Cordy, P.; Veiga, M.; Carrasco, V.H.G.

    2008-01-01

    Artisanal miners in developing countries use mercury amalgamation processes to extract gold. The amalgams are then refined before being sold on to urban gold shops. The amalgams can often contain between 2 to 40 per cent mercury. Unburned amalgams are also often sold directly to gold shops. There are serious health risks for shop employees and nearby populations when the gold is melted and further purified. Studies have shown that mercury concentrations in the ambient air of gold shops often exceeds World Health Organization (WHO) limits by an order of magnitude or more. This study examined the practices and technologies used to refine gold in Latin America and Indonesia. The study compared and contrasted various refining methods and their resulting mercury emissions. Methods of reducing mercury emissions were also investigated, including a filtration system designed to capture 80 per cent of mercury emissions. Barriers to implementing mercury emissions reduction plans were also investigated. It was concluded that the design of urban gold shops must include condensers, fume hoods, and efficient mercury capture systems. 15 refs

  14. Digitalization influence on shopping centers strategic management

    Directory of Open Access Journals (Sweden)

    Ioniţă Irene Mihaela

    2017-07-01

    Full Text Available Shopping centers are an important aspect of the extremely dynamic life of the 21st century consumer. Nowadays, worldwide, shopping centers represent significant multimillion euro investments, remarking themselves with bold architectures and structures and an individual brand image. Retail markets are currently under transformation by a confluence of new retailing technologies, dramatic shifts in the demographic profile and preferences of more affluent and educated shoppers. Part of the market share in modern retail moved to new forms of selling, which weakened the offer of some traditional retailers, while also creating opportunities for retailers to move and integrate their offerings with new digital tools (via electronic commerce, social commerce and mobile commerce. Meeting customer needs and increasing sales are the primary drivers behind retailers use of information systems and technology (IS/IT. New developments in IS/IT offer new opportunities and challenges for organizations and society. The current paper proposes to analyze the way digital media and information technology (computers and mobile devices influences the virtual and physical shopping experiences, and shopping centers management consequently. The need for communication & sales channels integration, the impact of new information technologies (IT’s, the growing role of social / digital media, the balance between personalization and privacy – all represent challenges retail industry needs to currently adapt to face digitalization. E-commerce is transforming both consumer behavior and retailing business models, by greatly expanding shopping convenience, selection and affordability.

  15. Kinematics and kinetics of the bench-press and bench-pull exercises in a strength-trained sporting population.

    Science.gov (United States)

    Pearson, Simon N; Cronin, John B; Hume, Patria A; Slyfield, David

    2009-09-01

    Understanding how loading affects power production in resistance training is a key step in identifying the most optimal way of training muscular power - an essential trait in most sporting movements. Twelve elite male sailors with extensive strength-training experience participated in a comparison of kinematics and kinetics from the upper body musculature, with upper body push (bench press) and pull (bench pull) movements performed across loads of 10-100% of one repetition maximum (1RM). 1RM strength and force were shown to be greater in the bench press, while velocity and power outputs were greater for the bench pull across the range of loads. While power output was at a similar level for the two movements at a low load (10% 1RM), significantly greater power outputs were observed for the bench pull in comparison to the bench press with increased load. Power output (Pmax) was maximized at higher relative loads for both mean and peak power in the bench pull (78.6 +/- 5.7% and 70.4 +/- 5.4% of 1RM) compared to the bench press (53.3 +/- 1.7% and 49.7 +/- 4.4% of 1RM). Findings can most likely be attributed to differences in muscle architecture, which may have training implications for these muscles.

  16. English Shop Signs and Brand Names

    Directory of Open Access Journals (Sweden)

    Parvaneh Khosravizadeh

    2016-07-01

    Full Text Available The present study tries to investigate the people’s attitude to the use of English words in TV commercials, brand-naming and shop signs in Iran and specifically in Tehran where due to the fact that it is the capital, more English might be used for the sake of foreigners. The widespread use of English shop signs and English brand names for recently produced goodsdrove the researchers to investigate peoples’ attitude as consumers from two aspects of age and education. To reach the research goal, a questionnaire was devised and distributed to 100 people at random selection probing their attitudes while considering two factors of age and education. The result of the research will mostly benefit sociolinguists and business marketers.Keywords: age, education, advertising, brand-naming, shop signs, globalization

  17. Attitudinal Explanation on Virtual Shopping Intention

    Directory of Open Access Journals (Sweden)

    Ritzky Karina M.R. Brahmana

    2014-08-01

    Full Text Available Abstract. Virtual stores provide great efficiency in the retail value chain, and their existence has tremendously paved the way for electronic commerce. Understanding the intention of consumers to shop online in attitudinal perspective will provide important contribution to the area of e-commerce. This research proposes Task Technology Fit, Perceived Ease of Use (PEoU, and Perceived Usefulness (PU as the factors that drive consumers’ intention. The results from our survey study of 310 online consumers in Indonesia indicate that TTF affects PEoU and PU significantly. Our hierarchical model also reports that PEoU is the mediating effect on the relationship between TTF and Intention. The resulting model explains a large portion of the factors that lead a user’s behavioural intention to use a virtual shop. Keywords : Attitudinal, Task Technology Fit, Perceived Ease of Use, Perceived Usefulness, Retail, Virtual Shopping Intention

  18. Women who doctor shop for prescription drugs.

    Science.gov (United States)

    Worley, Julie; Thomas, Sandra P

    2014-04-01

    Doctor shopping is a term used to describe a form of diversion of prescription drugs when patients visit numerous prescribers to obtain controlled drugs for illicit use. Gender differences exist in regard to prescription drug abuse and methods of diversion. The purpose of this phenomenological study guided by the existential philosophy of Merleau-Ponty was to understand the lived experience of female doctor shoppers. Interviews were conducted with 14 women, which were recorded, transcribed, and analyzed. Included in the findings are figural aspects of the participants' experience of doctor shopping related to the existential grounds of world, time, body, and others. Four themes emerged from the data: (a) feeding the addiction, (b) networking with addicts, (c) playing the system, and (d) baiting the doctors. The findings suggest several measures that nurses can take to reduce the incidence of doctor shopping and to provide better care for female doctor shoppers.

  19. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    Directory of Open Access Journals (Sweden)

    Carolyn Chin

    2005-11-01

    Full Text Available Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is needed for a successful ‘shopping experience’ online and what the possible obstacles or pitfalls along the way might be. We initially introduce the concepts of virtual presence (the sense of ‘being there’ and virtual reality, discussing the possible roles both can play in providing a solution to the problem of effective online shopping. We then consider the Experience Economy, a concept which encapsulates many of the issues related to the problem of online shopping and which suggests ways in which online retailers can enhance the effectiveness of their sites by means of a virtual ‘experience’. Having set the scene for online shopping, we discuss eTailing today in terms of direct product experience and the opportunities which cyber-shopping offers to replicate this process. Finally, we identify some of the possibilities and problems of online shopping today, illustrating the current status of virtual presence in retailing with two micro-cases of success and failure.

  20. Doctor and pharmacy shopping for controlled substances.

    Science.gov (United States)

    Peirce, Gretchen L; Smith, Michael J; Abate, Marie A; Halverson, Joel

    2012-06-01

    Prescription drug abuse is a major health concern nationwide, with West Virginia having one of the highest prescription drug death rates in the United States. Studies are lacking that compare living subjects with persons who died from drug overdose for evidence of doctor and pharmacy shopping for controlled substances. The study objectives were to compare deceased and living subjects in West Virginia for evidence of prior doctor and pharmacy shopping for controlled substances and to identify factors associated with drug-related death. A secondary data study was conducted using controlled substance, Schedule II-IV, prescription data from the West Virginia Controlled Substance Monitoring Program and drug-related death data compiled by the Forensic Drug Database between July 2005 and December 2007. A case-control design compared deceased subjects 18 years and older whose death was drug related with living subjects for prior doctor and pharmacy shopping. Logistic regression identified factors related to the odds of drug-related death. A significantly greater proportion of deceased subjects were doctor shoppers (25.21% vs. 3.58%) and pharmacy shoppers (17.48% vs. 1.30%) than living subjects. Approximately 20.23% of doctor shoppers were also pharmacy shoppers, and 55.60% of pharmacy shoppers were doctor shoppers. Younger age, greater number of prescriptions dispensed, exposure to opioids and benzodiazepines, and doctor and pharmacy shopping were factors with greater odds of drug-related death. Doctor and pharmacy shopping involving controlled substances were identified, and shopping behavior was associated with drug-related death. Prescription monitoring programs may be useful in identifying potential shoppers at the point of care.

  1. Shopping intention prediction using decision trees

    OpenAIRE

    Šebalj, Dario; Franjković, Jelena; Hodak, Kristina

    2017-01-01

    Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer.Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they inten...

  2. Store Location in Shopping Centers: Theory & Estimates

    OpenAIRE

    Kerry D. Vandell; Charles C. Carter

    2000-01-01

    This paper develops a formal theory of store location within shopping centers based on bid rent theory. The bid rent model is fully speci?ed and solved with the objective function of pro?t maximization in the presence of comparative, multipurpose and impulse shopping behavior. Several hypotheses result about the optimal relationships between store types, sizes, rents, sales, and distances from the mall center. The hypotheses are tested and con?rmed using data from a sample of 689 leases in ei...

  3. The impact of science shops on university research and education

    DEFF Research Database (Denmark)

    Hende, Merete; Jørgensen, Michael Søgaard

    This report discusses the impact from university-based science shops on curricula and research. Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. This impact has been investigated...... through the SCIPAS questionnaire sent out to science shops and through follow-up interviews with employees from nine different university-based science shops and one university researcher. Not all the cases call themselves science shops, but in the report the term 'science shop' will be used most...... way or the other has had impact on university curricula and/or research. The analysis and the case studies have theoretically been based on literature on universities and education and research as institutions and a few articles about the impact of science shops on education and research. The analysis...

  4. Informal sector shops and AIDS prevention An exploratory social ...

    African Journals Online (AJOL)

    Informal sector shops and AIDS prevention An exploratory social marketing ... The existence of a variety of media and interpersonal information sources on the ... shops should be further investigated as avenues for AIDS prevention efforts.

  5. Bench for mechanical cleaning of circular welded joints

    International Nuclear Information System (INIS)

    Sklifasovskij, V.M.

    1986-01-01

    A special bench for weld reinforcement removal and mechanical cleaning of the heat affected zones was designed to provide for a possibility of an ultrasonic testing of welded joints in the course of steam generator section fabrication. The bench comprises a mechanized roller support for fixing and rotating the workpiece; a lap-cutting device for external machining; milling/grinding tractor for internal machining and a delivery table for tractor approach and departure. The bench performance and overall view are presented. The operation succession is described

  6. Marketing activities of vape shops across racial/ethnic communities

    OpenAIRE

    Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B.; Sussman, Steve

    2017-01-01

    INTRODUCTION There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community’s demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by...

  7. Growing Shopping Malls and Behavior of Urban Shoppers

    OpenAIRE

    Rajagopal

    2009-01-01

    Shopping malls contribute to business more significantly than traditional markets which were viewed as simple convergence of supply and demand. Shopping malls attract buyers and sellers, and induce customers providing enough time to make choices as well as a recreational means of shopping. However, competition between malls, congestion of markets and traditional shopping centers has led mall developers and management to consider alternative methods to build excitement with customers. This stu...

  8. Consumer Buying Behavior Towards Online Shopping Stores in Malaysia

    OpenAIRE

    Mehrdad Salehi

    2011-01-01

    The Internet as a global medium is quickly gaining interest and attractiveness as the most revolutionary marketing tool. The global nature of communication and shopping has as well redefined, seeing that it is the perfect vehicle for online shopping stores. Online convenient shop is mostly reflected in shorter time and less energy spent, including shipping cost reduction, less crowd and queues than real markets, unlimited time and space, which all increase convenience of shopping. Internet sh...

  9. End-user Acceptance of Online Shopping Sites in India

    OpenAIRE

    Bolar K; Shaw B

    2015-01-01

    Online shopping sites have recently gained momentum in India. Since the ecommerce industry is in infancy state, customer (end user) satisfaction with the online shopping is the prime concern because decreasing customer satisfaction leads to negative electronic word of mouth (eWOM) which is very severe for the business. Through a dataset gathered from 127 online shopping customers in with respect to online shopping sites in India, this study investigates the role of website quality, informatio...

  10. What do we know about consumer m-shopping behaviour?

    OpenAIRE

    Marriott, Hannah; Williams, Michael; Dwivedi, Yogesh

    2017-01-01

    Purpose – This paper provides a review of mobile shopping (m-shopping) acceptance literature to bring international marketing and consumer research attention to m-shopping acceptance factors and limitations in current understandings to propose recommendations for further academic and retailing attention.\\ud Design/methodology – Keyword searches identified consumer-focused literature across mobile commerce, mobile shopping, mobile browsing, and mobile purchasing, published in English language ...

  11. An architecture for agile shop floor control systems

    DEFF Research Database (Denmark)

    Langer, Gilad; Alting, Leo

    2000-01-01

    as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system...

  12. A multipurpose shopping trip model to assess retail agglomeration effects

    NARCIS (Netherlands)

    Arentze, T.A.; Oppewal, H.; Timmermans, H.J.P.

    2005-01-01

    Multipurpose shopping is a prominent and relevant feature of shopping behavior. However, no methodology is available to assess empirically how the demand for multipurpose shopping depends on retail agglomeration or, in general, the characteristics of retail supply, such as the numbers and types of

  13. Approximation algorithms for the parallel flow shop problem

    NARCIS (Netherlands)

    X. Zhang (Xiandong); S.L. van de Velde (Steef)

    2012-01-01

    textabstractWe consider the NP-hard problem of scheduling n jobs in m two-stage parallel flow shops so as to minimize the makespan. This problem decomposes into two subproblems: assigning the jobs to parallel flow shops; and scheduling the jobs assigned to the same flow shop by use of Johnson's

  14. Minimizing total weighted completion time in a proportionate flow shop

    NARCIS (Netherlands)

    Shakhlevich, N.V.; Hoogeveen, J.A.; Pinedo, M.L.

    1998-01-01

    We study the special case of the m machine flow shop problem in which the processing time of each operation of job j is equal to pj; this variant of the flow shop problem is known as the proportionate flow shop problem. We show that for any number of machines and for any regular performance

  15. Effects of time of day on shopping behavior.

    Science.gov (United States)

    Chebat, J C

    1999-04-01

    Shoppers interviewed in a shopping mall at different times of the day show different activities within the mall and attitudes toward the products. Prices also vary with the time of the day. These results can be explained in terms of shopping values and the related demographic characteristics of the population visiting the shopping center at different times of the day.

  16. Turning shopping habits of young consumers into green

    NARCIS (Netherlands)

    Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

    2014-01-01

    Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

  17. Tourist shopping behavior in a historic downtown area

    NARCIS (Netherlands)

    Kemperman, A.D.A.M.; Borgers, A.W.J.; Timmermans, H.J.P.

    2009-01-01

    Shopping is one of the most important activities for tourists. The purpose of this study is to describe and predict tourist shopping route choice behavior in a downtown historic center. Reported routes of tourists in the downtown shopping area of Maastricht, located in the Southern part of the

  18. What drives people? Analyzing leisure-shopping trip decision making

    NARCIS (Netherlands)

    de Ceunynck, T.; Kusumastuti, Diana; Hannes, E.; Janssens, D.; Wets, G.

    2011-01-01

    Because of the strong increase in the number of leisure-shopping trips, a shift towards more sustainable leisure-shopping behaviour is desirable. This can be attained by having a better insight into people’s reasoning in choosing a transport mode and shopping location for this type of activities.

  19. Internet Shopping Behavior of College of Education Students

    Science.gov (United States)

    Kiyici, Mubin

    2012-01-01

    Internet is an important facilitator for human and humans use this medium almost every phase. As a shopping medium, internet attract human so attract researcher. Younger people can adapt newer technologies so they can adapt internet as shopping tool. In this research it is tried to define college of education students' online shopping behavior and…

  20. Online versus conventional shopping: Consumers' risk perception and regulatory focus

    NARCIS (Netherlands)

    van Noort, G.; Kerkhof, P.; Fennis, B.M.

    2007-01-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

  1. Online versus Conventional Shopping: Consumers' Risk Perception and Regulatory Focus

    NARCIS (Netherlands)

    van Noort, Guda; Kerkhof, Peter; Fennis, B.M.

    2007-01-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

  2. Retail environments and spatial shopping behavior

    NARCIS (Netherlands)

    Timmermans, H.J.P.; Gaerling, T.; Golledge, R.G.

    1993-01-01

    The interplay between aspects of retail environments and consumer spatial shopping behavior has traditionally been an area of major concern in geography, urban planning and related disciplines. It reflects an interest in explaining the relationship between locational and nonlocational attributes of

  3. Architectural Considerations for Holonic Shop Floor Control

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    of the HMS concept, followed by an investigation regard-ing the development of shop floor control architectures. This will include a summary of the ongoing research on HMS, and current results regarding the development of a holonic SFC architecture in a cellular manufacturing perspective. The paper...

  4. 77 FR 56552 - Holiday Mobile Shopping Promotion

    Science.gov (United States)

    2012-09-13

    ... POSTAL SERVICE 39 CFR Part 111 Holiday Mobile Shopping Promotion AGENCY: Postal Service \\TM... Postal Service, Domestic Mail Manual (DMM[supreg]) 709.3 to add a new temporary promotion during November... Promotion (``Promotion''), which will take place between November 7, 2012 and November 21, 2012 (``promotion...

  5. CONSUMIDOR ADOLESCENTE EM AMBIENTE DE SHOPPING CENTER

    Directory of Open Access Journals (Sweden)

    Lunie Imamura Lima

    2009-07-01

    shopping center da cidade de Fortaleza (CE e objetivou conhecer as características bio-demográficas, os hábitos de utilização do shopping e os principais elementos influenciadores do processo de decisão de compra deste segmento. De natureza descritiva, quantitativa, com corte transversal; a pesquisa utilizou um questionário estruturado aplicado a uma amostra não-probabilística por conveniência, com maioria do sexo masculino, faixa etária entre 13 e 15 anos, provenientes de famílias de classe alta e renda familiar mensal superior a R$ 2700,00. Os resultados demonstraram que a maioria dos respondentes recebe mesada no valor menor que R$ 80,00; vai ao shopping de carro com pais ou parentes; gasta de R$ 10,00 a R$ 30,00; freqüenta o local 3 vezes na semana; permanece de 4 a 6 horas e é acompanhado pelos amigos. Ainda mostrou que pais ou familiares são os principais elementos influenciadores do processo de decisão de compra, enquanto os amigos os principais meios de informações sobre novos produtos. O estudo pretende contribuir com a literatura científica nas áreas de Marketing e Comportamento do consumidor e servir de instrumento gerencial aos dirigentes de shopping centers.

  6. 30 CFR 57.4761 - Underground shops.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and... toxic gases from a fire originating in an underground shop where maintenance work is routinely done on...

  7. Job shop scheduling by simulated annealing

    NARCIS (Netherlands)

    Laarhoven, van P.J.M.; Aarts, E.H.L.; Lenstra, J.K.

    1992-01-01

    We describe an approximation algorithm for the problem of finding the minimum makespan in a job shop. The algorithm is based on simulated annealing, a generalization of the well known iterative improvement approach to combinatorial optimization problems. The generalization involves the acceptance of

  8. Informal sector shops and AIDS prevention

    African Journals Online (AJOL)

    1991-04-20

    Apr 20, 1991 ... marketing goals go beyond information transfer and focus on behaviour .... thought their shop could do to help to inform the people in their area about AIDS. ..... history of residents of the shack area of Khayelitsha. Occasional ...

  9. Job shop scheduling by local search

    NARCIS (Netherlands)

    Vaessens, R.J.M.; Aarts, E.H.L.; Lenstra, J.K.

    1994-01-01

    We survey solution methods for the job shop scheduling problem with an emphasis on local search. We discuss both cleterministic and randomized local search methods as well as the applied neighborhoods. We compare the computational performance of the various methods in terms of their effectiveness

  10. The Great Irish Head Shop Controversy

    Science.gov (United States)

    Ryall, Graham; Butler, Shane

    2011-01-01

    This research describes and analyses recent policy developments in Ireland in relation to the practice of selling psychoactive substances which, while not themselves illegal, mimic the effects of commonly used illegal drugs. These so-called "legal highs" had been sold in Ireland through an increasing number of "head shops"…

  11. Shopping for Courses on the Mall.

    Science.gov (United States)

    Gallagher, John C.

    1980-01-01

    Describes an extension program conducted by Suffolk County Community College, New York, at an area shopping mall. Discusses program offerings, including a series of general interest lectures, regular credit courses, and a set of noncredit minicourses for mall employees. Examines the public relations value of the extension efforts. (JP)

  12. Indices of pedestrian behavior in shopping areas

    NARCIS (Netherlands)

    Borgers, A.; Timmermans, H.

    2014-01-01

    A number of indices to describe and compare sets of pedestrian routes in shopping environments will be introduced. The first set of indices is related to characteristics of the trajectories and the second set to visiting outlets. These statistics can be used to assess the performance of models

  13. Secret Shopping as User Experience Assessment Tool

    Science.gov (United States)

    Boyce, Crystal M.

    2015-01-01

    Secret shopping is a form of unobtrusive evaluation that can be accomplished with minimal effort, but still produce rich results. With as few as 11 shoppers, the author was able to identify trends in user satisfaction with services provided across two entry-level desks at Illinois Wesleyan University's The Ames Library. The focus of this secret…

  14. Designing a Shopping System for Senior Citizens

    Science.gov (United States)

    Roman, Harry T.

    2010-01-01

    It is all about serving the customer. That is how capitalism plays out. It finds a market need and then creates a product or service to address that need. The Baby Boomer generation, all 76 million, will be retiring soon. Eventually, some may find it very hard to move about and do their routine food shopping. In this article, the author's…

  15. Commuter Shopping : A study in understanding commuting in the context of shopping

    OpenAIRE

    Andersson, Åsa; Skoog, Sara; Svensson, Johanna

    2014-01-01

    Background For ages people have commuted to work, or to other activities, located outside their home municipality. Statements found indicate that the basic decision for commuting are based on utility maximisation and no matter what the character of the benefit is; it should be higher than what can be found closer to the home location. This thesis aims to investigate if people are also commuting with the purpose of obtaining benefits from shopping. The shopping location will in this thesis be ...

  16. Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

    OpenAIRE

    Kosfeld, M.

    1999-01-01

    This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners and customers, and second, the ‘solution’ to this problem depends on the specific cost structure of stores and the preferences of customers. In particular, it may happen that, even if extended shoppi...

  17. Retrofit designs for small bench-type blood cell counters.

    Science.gov (United States)

    Ferris, C D

    1991-01-01

    This paper describes several retrofit designs to correct operational problems associated with small bench-type blood cell counters. Replacement electronic circuits as well as modifications to the vacuum systems are discussed.

  18. Additive Manufactured Coronagraph Bench for Detection of Exoplanets

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to use additive manufacturing (AM) to build a Coronagraph Bench engineering test unit.  The versatility inherent in the 3D-printing process allows for a...

  19. Possible Opioid Shopping and its Correlates.

    Science.gov (United States)

    Walker, Alexander M; Weatherby, Lisa B; Cepeda, M Soledad; Bradford, Daniel; Yuan, Yingli

    2017-11-01

    We created an operational definition of possible opioid shopping in US commercial health insurance data and examined its correlates. The population consisted of 264,204 treatment courses in persons with a fill for an opioid or diuretic prescription in 2012 and a second within 18 months. We examined counts of prescribers and pharmacies and the numbers of fills and overlaps for ability to discriminate courses of opioids from diuretics, which were a negative control. The most discriminatory measure, indicating possible shopping behavior, was cross-tabulated against other prescriptions filled and diagnoses as found in insurance claims. The associations between claims characteristics and shopping behavior were assessed in a logistic regression. A definition that classified possible "moderate" or "extensive" shopping when a person obtained drug through at least 3 practices and at least 3 pharmacies over 18 months was highly discriminatory between opioid and diuretic treatment. Overlaps between fills and number of fills did not improve the discrimination. Data from insurance claims strongly predicted moderate-to-extensive levels of possible shopping (c=0.82). Prominent among 20 significant predictors were: state of residence; amount of opioid dispensed; self-payment; use of nonspecialist prescribers; high use of anxiolytics, hypnotics, psychostimulants, and antipsychotics; and use of both immediate release and extended-release or long-acting opioids. The use of ≥3 prescribing practices and ≥3 dispensing pharmacies over 18 months sharply discriminated courses of opioid treatment from courses of diuretics. This pattern of fills was additionally associated with the numbers of nonspecialist and self-paid fills, the total morphine milligram equivalents dispensed, and heavier use of drugs for anxiety, sleep, attention, and psychosis.

  20. Shop stewards' learning and union strategies

    DEFF Research Database (Denmark)

    Warring, Niels

    2007-01-01

    In Denmark the trade unions have well established educational systems providing the shop stewards with a variety of competencies. Union courses have been analysed focusing on shop stewards' satisfaction with the content and the practical impact of the courses. However, little attention has been...... different theoretical traditions: Shop steward's learning is situational, relational and cross-contextual. Shop stewards' learning is lifelong and life wide. And shop stewards' learning is closely connected to the development of the labour market and not least the unions' priorities, interpretation...

  1. Online versus conventional shopping: consumers' risk perception and regulatory focus.

    Science.gov (United States)

    van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

    2007-10-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping.

  2. HEV Test Bench Based on CAN Bus Sensor Communication

    Directory of Open Access Journals (Sweden)

    Shupeng ZHAO

    2014-02-01

    Full Text Available The HEV test bench based on Controller Area Network bus was studied and developed. Control system of HEV power test bench used the CAN bus technology. The application of CAN bus technology on control system development has opened up a new research direction for domestic automobile experimental platform. The HEV power control system development work was completed, including power master controller, electric throttle controller, driving simulation platform, CAN2.0 B communication protocol procedures for formulation, CAN communication monitoring system, the simulation model based on MATLAB code automatic generation technology research, etc. Maximum absorption power of the test bench is 90 kW, the test bench top speed is 6000 r/min, the CAN communication data baud rate is 10~500 k, the conventional electric measurement parameter part precision satisfies the requirement of development of HEV. On the HEV test bench the result of regenerative braking experiment shows that the result got by the test bench was closer to the results got by outdoor road test. And the fuel consumption experiment test results show that the HEV fuel consumption and the charge-discharge character are in linear relationship. The establishment of the test platform for the evaluation of the development of hybrid electric vehicle and power provides physical simulation and test platform.

  3. Breaking Out of the Local: International dimensions of science shops

    Directory of Open Access Journals (Sweden)

    Caspar DeBok

    2008-09-01

    Full Text Available In this article we want to give an overview of the international dimension and the interest of the European Union (EU in the concept of Science Shops. The European Commission (EC manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science Shop. Detailed information about the Science Shop concept can be found at the Living Knowledge website (www.livingknowledge.org. Living Knowledge represents the international Science Shop Network. In this article international developments of the Science Shop Network, like the project TRAMS, and Science Shop backgrounds will be linked with past and new EU policies like the EU 7th Framework Programme for Research. It shows how community-based research does not only have a local dimension. The international Science Shop activities show the strengths of international cooperation to break out of the local and to bring local issues on the international agenda. Detailed information about the Science Shop concept and daily routines of a Science Shop can be found at the Living Knowledge website (www.livingknowledge.org, e.g. at the FAQ section and in the toolbox.

  4. An Exploratory Analysis of Online Shopping Behavior in Turkey

    Directory of Open Access Journals (Sweden)

    Adnan Veysel Ertemel

    2017-06-01

    Full Text Available Alongside the technologic developments, transformation in user behavior and business models has been observed. New areas and models are emerged in a lot of grounds like the communication of people or daily activities. So a new face put for shopping behavior by the e-commerce, which is one of the novelties. This study tries to research online shopping behavior in Turkey. With a quantitative research, device usage, the reasons behind to shop or not to shop online, online shopping category and e-commerce site preferences, payment methods, international e-commerce and online marketplace usage is investigated. As implications of the research, “saving time“ is found to be the foremost reason for shopping online in Turkey and “travel and bookings” category is found as the most shopped category among the results of the survey.

  5. Cross-border shopping and tourism destination marketing

    DEFF Research Database (Denmark)

    Makkonen, Teemu

    2016-01-01

    This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated......-border shopping into tourism destination marketing strategies. The results have wider relevance for other border regions.......This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated...... just south of the same border enable Danes to capitalize on the lower value added tax levels in Germany–is utilized as an illustrative case example. The data was collected by analysing the relevant tourism destination marketing material and via interviews with local destination marketing organizations...

  6. Velocity- and power-load relationships of the bench pull vs. bench press exercises.

    Science.gov (United States)

    Sánchez-Medina, L; González-Badillo, J J; Pérez, C E; Pallarés, J G

    2014-03-01

    This study compared the velocity- and power-load relationships of the antagonistic upper-body exercises of prone bench pull (PBP) and bench press (BP). 75 resistance-trained athletes performed a progressive loading test in each exercise up to the one-repetition maximum (1RM) in random order. Velocity and power output across the 30-100% 1RM were significantly higher for PBP, whereas 1RM strength was greater for BP. A very close relationship was observed between relative load and mean propulsive velocity for both BP (R2=0.97) and PBP (R2=0.94) which enables us to estimate %1RM from velocity using the obtained prediction equations. Important differences in the load that maximizes power output (Pmax) and the power profiles of both exercises were found according to the outcome variable used: mean (MP), peak (PP) or mean propulsive power (MPP). When MP was considered, the Pmax load was higher (56% BP, 70% PBP) than when PP (37% BP, 41% PBP) or MPP (37% BP, 46% PBP) were used. For each variable there was a broad range of loads at which power output was not significantly different. The differing velocity- and power-load relationships between PBP and BP seem attributable to the distinct muscle architecture and moment arm levers involved in these exercises. © Georg Thieme Verlag KG Stuttgart · New York.

  7. The Effects of Bench Press Variations in Competitive Athletes on Muscle Activity and Performance

    OpenAIRE

    Saeterbakken, Atle Hole; Mo, Dag-Andr?; Scott, Suzanne; Andersen, Vidar

    2017-01-01

    Abstract The aim of the study was to compare the EMG activity performing 6RM competition style bench press (flat bench-wide grip) with 1) medium and narrow grip widths on a flat bench and 1) inclined and declined bench positions with a wide grip. Twelve bench press athletes competing at national and international level participated in the study. EMG activity was measured in the pectoralis major, anterior and posterior deltoid, biceps brachii, triceps brachii and latissimus dorsi. Non-signific...

  8. Marketing activities of vape shops across racial/ethnic communities.

    Science.gov (United States)

    Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B; Sussman, Steve

    2016-01-01

    There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community's demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information.

  9. The Effects of Shopping Orientations, Consumer Innovativeness, Purchase Experience, and Gender on Intention to Shop for Fashion Products Online

    Directory of Open Access Journals (Sweden)

    Ratih Puspa Nirmala

    2011-02-01

    Full Text Available Nowadays, many fashion retailers or marketers use the power of internet to promote and sell their products. This research examines the effects of consumers’ shopping orientations (brand/fashion consciousness, shopping enjoyment, price consciousness, convenience/time consciousness, shopping confidence, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender on consumers’ intention to shop for fashion products online. Data were collected through online surveys from the population of internet users in Indonesia, aged between 15 and 30 years old (generation Y, who had bought or browsed fashion products through the internet (N=210. This research is a quantitative research which uses purposive sampling and multiple regression analysis. Results show that the effects of several shopping orientations (shopping enjoyment, price consciousness, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender, are significant on consumers’ intention to shop for fashion products online. Furthermore, gender is marginally significant related to consumers’ intention to shop for fashion products online. Surprisingly, women tend to have lower intentions to shop for fashion products online compared to men.

  10. Elbow joint fatigue and bench-press training.

    Science.gov (United States)

    Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

    2014-01-01

    Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

  11. Movement Features Which Describe the Flat Bench Press

    Directory of Open Access Journals (Sweden)

    Król Henryk

    2017-06-01

    Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.

  12. Pengaruh Hedonic Shopping Motivation Terhadap Impulse Buying Pada Toko Online: Studi Pada Toko Online Zalora

    OpenAIRE

    Pasaribu, Lia Octaria; Dewi, Citra Kusuma

    2015-01-01

    Online shopping, including shopping for fashion goods, has become a trend in Indonesia. One of buyer's motivations to do online-fashion-shopping is hedonic shopping motivation. This research aims to examine the influence of hedonic shopping motivation on impulse buying process. Using 100 buyers of Zalora (an online shop) as the respondents, this study confirms that hedonic shopping motivation has a significant influence on the impulse buying process.

  13. Shopping cart injuries, entrapment, and childhood fatality.

    Science.gov (United States)

    Jensen, Lisbeth; Charlwood, Cheryl; Byard, Roger W

    2008-09-01

    Shopping carts may be associated with a variety of injuries, particularly in toddlers and young children. These usually relate to falls from carts or to tip-overs. Injuries that are sustained include hematomas/contusions, abrasions, lacerations, fractures, and fingertip amputations. Fatal episodes are uncommon and are usually due to blunt craniocerebral trauma from falls. A case involving a 19-month-old girl is reported who became entrapped when she inserted her head through the side frame of a cart that had been removed from a supermarket and left at her home address. Death was caused by neck compression. Although rare, the potential for lethal entrapment during unsupervised play means that the presence of stray shopping carts at private residences and in public places, including playgrounds and parks, is of concern. Strategies, such as coin deposits, should be encouraged to assist in the return of such carts to supermarkets.

  14. RFID Data Cleaning for Shop Floor Applications

    Science.gov (United States)

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  15. Trustworthy Online Shopping with Price Impact

    Directory of Open Access Journals (Sweden)

    Musial Jedrzej

    2017-06-01

    Full Text Available Internet shopping is one of the main pillars of electronic commerce.According to the literature, the Internet Shopping Optimization Problem (ISOPhas been defined in order to optimize the global cost of online purchase, taking into account both the cost of products and shipping. In this study, it was decided to propose and analyze a very interesting, and really substantial, extension of the ISOP.Namely, trust factors were subjected to careful analysis from the customer point of view. The analysis is based on a specially prepared questionnaire, supplemented by the information from the literature and our own observations. Thus, it was possible to propose a definition of a new mathematical model of the problem, and to prove its affiliation to the class of strongly NP-hard problems. In addition, the heuristic algorithm is proposed, which can be used to solve the problem.

  16. Employee motivation improvement at "Drogas" shop

    OpenAIRE

    Konno, Viktorija

    2012-01-01

    Work : Employee motivation improvement at “Drogas” shop for getting baccalaureate in science management. This work includes four parts. In the first section author explained the definition of motivation, there was reviewed motivation's role in enterprise. Author reviewed total motivation's model, which models exist for a long while and how they were changing in process of time. The second part contains wide information about motivation's theories and description of motivation's t...

  17. Maritime Cast Shop Integrated Improvement Plan

    Science.gov (United States)

    2010-08-20

    constraint departments (Upgrade & Radiography). The intent of this visual communication system was to limit the inspection queue to about one days...Install small work status boards in both work areas to facilitate visual communication .  Install protection for water coolant mix pipe... visual communication system to track parts as they move throughout the shop floor. Visual management systems tailored to the unique needs of a company

  18. Shopping intention prediction using decision trees

    Directory of Open Access Journals (Sweden)

    Dario Šebalj

    2017-09-01

    Full Text Available Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer. Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they intend to shop or not. Methods: Data sample consists of 305 respondents, who are persons older than 18 years involved in buying groceries for their household. The research was conducted in February 2017. In order to create a model, the decision trees method was used with its several classification algorithms. Results: All models, except the one that used RandomTree algorithm, achieved relatively high classification rate (over the 80%. The highest classification accuracy of 84.75% gave J48 and RandomForest algorithms. Since there is no statistically significant difference between those two algorithms, authors decided to choose J48 algorithm and build a decision tree. Conclusions: The value for money and price level in the store were the most significant variables for classification of shopping intention. Future study plans to compare this model with some other data mining techniques, such as neural networks or support vector machines since these techniques achieved very good accuracy in some previous research in this field.

  19. Factor Driving Consumer Intention in Online Shopping

    OpenAIRE

    Wanida Suwunniponth

    2014-01-01

    The objectives of this research paper was to study the influencing factors that contributed the willingness of consumers to purchase products online included quality of website, perceived ease of use, perceived usefulness, trust on online purchases, attitude towards online shopping and intentions to online purchases. The research was conducted in both quantitative and qualitative methods, by utilizing both questionnaire and in-depth interview. A questionnaire was used to collect data from 350...

  20. GENDER AND SHOPPING BEHAVIOR OUTCOMES IN THE CONTEXT OF SHOPPING CENTERS

    Directory of Open Access Journals (Sweden)

    Ioana Nicoleta ABRUDAN

    2016-09-01

    Full Text Available Understanding consumer behavior can be divided into three parts: before visiting the stores or shopping centers, during the visit, and after. From the point of view of the final result intended by retailers, satisfying customers in terms of profitability, all three components are equally important. A relevant segmentation criterion for most products and stores is gender. Previous research suggests that gender influences shopping motivations, the way people shop and shopping behavior outcomes. The purpose of this article is to investigate if there are, indeed, differences between shopping behavior outputs of women and men (affective loyalty (satisfaction and conative loyalty, as found by certain researchers, and also in terms of the factors that influence the formation of conative loyalty. The results confirm that there are few significant differences in the satisfaction level, although for women all values are slightly higher, and none in the repurchase and recommendation intentions between the two genders. Conative loyalty formation (defined as intent to repurchase and recommend takes place differently between the two genders.

  1. Genotoxic damage in auto body shop workers.

    Science.gov (United States)

    Siebel, Anna Maria; Basso da Silva, Luciano

    2010-10-01

    Some studies have shown increased DNA damage among car painters, but other professionals working in auto body and paint shops have not been extensively assessed. The aim of this study was to assess DNA damage in different types of auto body shop workers by measuring micronucleus (MN) levels in exfoliated buccal cells. The mean number of cells with MN per 2000 exfoliated buccal cells was analyzed in three groups of male workers: auto body repair technicians, painters, and office workers (control group). All participants answered a questionnaire inquiring about age, smoking habits, alcohol consumption, work practices, occupational exposure time, job activities, and use of protective equipment. The mean number of cells with MN was 3.50 ± 1.50 in auto body painters, 3.91 ± 2.10 in auto body repair technicians, and 0.80 ± 0.78 in office workers, with a significant difference between the control group and the two other groups (p = 0.0001). Age, occupational exposure time, use of protective masks, alcohol consumption, and smoking habit did not affect MN results. The findings indicate that technicians and painters working in auto body shops are at risk for genotoxic damage, while office workers seem to be protected.

  2. Aesthetic quality inference for online fashion shopping

    Science.gov (United States)

    Chen, Ming; Allebach, Jan

    2014-03-01

    On-line fashion communities in which participants post photos of personal fashion items for viewing and possible purchase by others are becoming increasingly popular. Generally, these photos are taken by individuals who have no training in photography with low-cost mobile phone cameras. It is desired that photos of the products have high aesthetic quality to improve the users' online shopping experience. In this work, we design features for aesthetic quality inference in the context of online fashion shopping. Psychophysical experiments are conducted to construct a database of the photos' aesthetic evaluation, specifically for photos from an online fashion shopping website. We then extract both generic low-level features and high-level image attributes to represent the aesthetic quality. Using a support vector machine framework, we train a predictor of the aesthetic quality rating based on the feature vector. Experimental results validate the efficacy of our approach. Metadata such as the product type are also used to further improve the result.

  3. Rostocker Hof shopping mall; Galerie Rostocker Hof

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1998-06-01

    The Rostocker Hof shopping mall comprises a 151-room hotel, a shopping mall of 45 shops, 22230m{sup 2} of office floor, and an underground garage with 308 parking lots. The following systems are described: Heating systems, air conditioning systems, refrigeration systems, ventilation systems, fire protection systems and electrical installation. Heat is supplied by the district heating grids. Circuit diagrams and flow charts are presented for the heat exchangers and heat supply system, the air conditioning system, the sanitary and sprinkler systems, and the single-room control systems for heat and fresh air supply. (MSK) [Deutsch] Der Rostocker Hof umfasst ein Hotel mit 151 Zimmern, eine Einzelhandelspassage mit 45 Laeden sowie 2230qm Bueronutzungsflaeche und eine Tiefgarage mit 308 Stellplaetzen. Die Haustechnik wird in folgenden Punkten erlaeutert: Heizungtechnik, Klimatechnik, Kaeltetechnik, Lueftungstechnik, Brandschutzanlage sowie Elektroinstallation. Die Waermerversorgung erfolgt durch Fernwaerme. Schaltplaene bzw. Funktionsablaeufe sind fuer die Waermeuebergabestation, die Waermeaufbereitung, die Luftaufbereitungsanlage, die Sanitaer- und Sprinkleranlage sowie fuer die Waerme- und Raumluftregelung der Einzelraeume enthalten. (MSK)

  4. Forecasting of indirect consumables for a Job Shop

    Science.gov (United States)

    Shakeel, M.; Khan, S.; Khan, W. A.

    2016-08-01

    A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

  5. Determinants of Customer Continuance Intention of Online Shopping

    Directory of Open Access Journals (Sweden)

    Al-maghrabi, T.

    2011-01-01

    Full Text Available The purpose of this study is to clarify theory and identify factors that could explain the level of continuance intention of e-shopping. A revised technology acceptance model integrates expectation confirmation theory and investigates effects of age differences. An online survey of internet shoppers in Saudi Arabia. Structural equation modelling and invariance analysis confirm model fit. The findings confirm that perceived usefulness, enjoyment and social pressure are determinants of e-shopping continuance. The structural weights are mostly equivalent between young and old but the regression path from perceived usefulness to social pressure is stronger for younger respondents. This research moves beyond e-shopping intentions to factors affecting e-shopping continuance, explaining 55% of intention to continue shopping online. Online strategies cannot ignore direct and indirect effects on continuance intentions. The findings contribute to literature on internet shopping and continuance intentions in the context of Saudi Arabia.

  6. Census tract correlates of vape shop locations in New Jersey.

    Science.gov (United States)

    Giovenco, Daniel P; Duncan, Dustin T; Coups, Elliot J; Lewis, M Jane; Delnevo, Cristine D

    2016-07-01

    Vape shops are opening across the USA, but little is known about the types of neighborhoods where they are located. This study explores community-level predictors of vape shop locations in New Jersey, USA. Vape shops were identified in July 2015 using a validated systematic online search protocol and geocoded using Google Earth Pro. Multivariable logistic regression identified demographic and other predictors of vape shop presence at the census tract level. Tobacco outlet density was consistently associated with higher odds of vape shop presence after adjusting for covariates (pretail were negatively associated with vapor outlets. Census tracts with a higher proportion of non-Hispanic black residents had significantly lower odds of having a vape shop (β=-0.03, pretail is high, but where fewer racial minorities live. The retail environment may communicate social norms regarding vaping and ultimately influence use behaviors of community residents. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. The impact of science shops on university research and education

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2000-01-01

    Science shops are mediating agencies at universities that give citizens and citizen groups access to the resources of the university through co-operation with students and researchers. Science shops have three aims: to support citizens and citizen groups in their efforts getting influence...... to the impact of science shops on universities and on society are discussed. A typology for the different types of knowledge requested by citizens and citizen groups through science shops is presented (documentation, knowledge building, development of new perspectives). As important aspects of the potentials......, prerequisites and limits to the impact of science shops are discussed the networking between the science shop and the researchers and teachers and with the citizens and other external actors, and the content and the structure of the curricula at the university....

  8. Social image of students who shop and don't shop online.

    Science.gov (United States)

    Lammers, H Bruce; Curren, Mary T; Cours, Deborah; Lammers, Marilyn L

    2003-06-01

    A descriptive survey of a stratified random sample of 326 undergraduates from a large, diverse university in Los Angeles was conducted to assess whether resistance to online shopping might be, in part, related to negative social perceptions of those who shop online. Indirect questioning showed that students perceived online student shoppers as more lazy and less likely to fear for the safety and security of others but also as more trustworthy, attractive, successful, and smart. Differences in social perceptions were not related to these students' own online spending.

  9. Optimal experience in online shopping: the influence of flow

    OpenAIRE

    Sharkey, Ultan; Acton, Thomas; Conboy, Kieran

    2012-01-01

    peer-reviewed This research investigates the influences of product presentation modes, decision behaviour and the consumer experience on Internet shopping. The growth of online shopping brings with it cognitive challenges for consumers attempting to assess large numbers of options in purchase decisions. Further, there is little guidance for vendors in terms of presenting large numbers of product. In this study, online shopping is viewed as an information processing, decision ta...

  10. Consumer behavior towards Online shopping of electronics in pakistan

    OpenAIRE

    BASHIR, ADIL

    2013-01-01

    E-commerce has made life simple and innovative of individuals and groups; consumer Behavior in online shopping is different from the physical market where he has access to see the product. The purpose of the research was to study the consumer behavior in online shopping of electronics especially in Pakistan. The main research question in thesis is how consumers behave while shopping online. Primary data was collected through the questionnaire survey and by emails from personal contacts in...

  11. Evaluation of Fresh Food Internet Shopping in Korean Beef

    OpenAIRE

    金, 鍾和; 森高, 正博; 福田, 晋; Kim, Jong-hwa; Moritaka, Masahiro; Fukuda, Susumu

    2013-01-01

    This paper focuses on consumer reactions to the fresh food internet shopping on Korea beef. In the paper, we have analyzed an effective relation in consumer's perceived qualities, the evaluation of commodities and the evaluation of fresh food internet shopping. As a result, two effective relations were found. Firstly, consumer's perceived qualities affect the evaluation of commodities. Secondly, the evaluation of commodities affects t-he evaluation of fresh food internet shopping. This result...

  12. Breaking Out of the Local: International dimensions of science shops

    OpenAIRE

    DeBok, Caspar; Steinhaus, Norbert

    2008-01-01

    In this article we want to give an overview of the international dimension and the interest of the European Union (EU) in the concept of Science Shops. The European Commission (EC) manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science ...

  13. E-commerce factors influencing consumers‘ online shopping decision

    OpenAIRE

    Baubonienė, Živilė; Gulevičiūtė, Gintarė

    2015-01-01

    Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

  14. Specific energy use in Swedish and Norwegian shopping malls

    Energy Technology Data Exchange (ETDEWEB)

    Stensson, Sofia; Axell, Monica (SP Energy Technology, Boraas (Sweden)); Smaage, Kjell Petter (Evotek AS (Norway)); Fahlen, Per (Chalmers Univ. of Technology, Building Services Engineering, Goeteborg (Sweden))

    2009-07-01

    The prevalence of shopping malls is growing worldwide. Internationally, there are differences in energy use and system solutions due to local outdoor climate, available energy resources, prices, national building regulations, traditions etc. On the other hand, tenants are usually international chains and they often have the same demands regarding indoor climate, system solutions etc. irrespective of the national differences. Shopping malls overall tends to have large lighting loads, high population density and, hence, a large air conditioning demand. There is also an apparent trend towards increasing glass surfaces and such design feature affects the energy balance of the building. For those interested in the energy efficiency of the building and its installations, it is interesting to know how different system solutions affect the energy use. Benchmarking between buildings gives valuable insight to energy efficient design and operation. However, available information on energy use for such benchmarking in shopping malls is still rather limited. This study investigates shopping malls in Sweden and Norway. Available national statistical data on retail and shopping malls are reviewed. Further building statistical data were collected from building owners and managers, covering energy use in 41 shopping malls. Additional energy use data for 115 shops, within three of these shopping malls were also collected. The building statistical data shows that the average energy use in Norwegian and Swedish shopping malls are approximately 291 and 279 kWh/m2/year respectively. The highest energy use exceeds the lowest figure by approximately 50 percent, indicating a significant potential for improvement. Results also show a wide deviation in energy use of the different shops in a shopping mall. The paper further provides a discussion concerning alternative benchmarking methods and necessary improvements to make valid conclusions regarding energy use in shopping malls.

  15. Influence of visualization on consumption during on-line shopping

    OpenAIRE

    Hictaler, Urška

    2013-01-01

    This diploma work studies the influence of visualization on consumption during on-line shopping. The first part of the thesis starts with key areas of visualization, consumption and on-line shopping. Visualization, areas of use, human perception and ways of product presentation in on-line shops are defined discussed first. Next, consumption, consumers and factors that influence their decisions and satisfaction are defined. The last topic in the first part of the thesis discusses on-line shopp...

  16. Customer Buying Behavior : - Online shopping towards electronic product

    OpenAIRE

    Wang, Dan; Yang, Liuzi

    2010-01-01

    ABSTRACT Online shopping in EU has been shown to a good potential market. The electronic equipment takes a high percent of the individuals shopping. Compared with other goods, online shopping of electronic goods adds great convenience to the life of the people. Buying electronic gadgets online gives customers an opportunity to find a great variety of product online, and customers can review a wide selection of products and find special offers and discount with the best deals online. In the co...

  17. Bench mark spectra for high-energy neutron dosimetry

    International Nuclear Information System (INIS)

    Dierckx, R.

    1986-01-01

    To monitor radiation damage experiments, activation detectors are commonly used. The precision of the results obtained by the multiple foil analysis is largely increased by the intercalibration in bench-mark spectra. This technique is already used in dosimetry measurements for fission reactors. To produce neutron spectra similar to fusion reactor and high-energy high-intensity neutron sources (d-Li or spallation), accelerators can be used. Some possible solutions as p-Be and d-D 2 O neutron sources, useful as bench-mark spectra are described. (author)

  18. HESITANCY TOWARDS ONLINE SHOPPING, A STUDY OF PAKISTANI CONSUMERS

    Directory of Open Access Journals (Sweden)

    Usman YOUSAF

    2012-01-01

    Full Text Available To study the influence of Perceived cost, risk, convenience and enjoyment on online consumer purchases. Being more convenient online shopping seems painless compared to in store shopping, why consumers are still reluctant to shop online?.A sample of 220 questionnaires was filled from different departments at University of Sargodha. Respondents were asked to fill the questionnaire based on four factors (Perceived cost, Perceived risk, Perceived convenience, Perceived enjoyment, there were 2 general questions. Out of 220, 207 questionnaires were returned. One sample test is applied in this study to check the reliability of independent variables. Analysis was also done on basis of gender and their ages. The most important factor out of four, which can persuade the customer's online buying decision, is delivery cost for purchased items and it has negative relationship with dependent variable, moreover perceived risk has also negative relationship with dependent one. Perceived convenience and Perceived enjoyment has positive relationship with online shopping preference. As online shopping is easier to do but due to extra delivery cost and risk factors consumers do not adopt online shopping and these factors should be minimized to promote online shopping. Online shopping should be promoted and to gain the consumer confidence, delivery cost and risk factor should be minimized. As online shopping is easier to do as compared to offline shopping but people still reluctant to use internet for online shopping, so to promote online shopping delivery cost and risk factor should be minimized to gain consumers attraction and confidence. People want to experience online shopping but it won’t be promoted until delivery cost and perceived risk factors be reduced. A little work has been done on exploring the factors that influence the online buying decision. These factors are called situational factors and include delivery charges, risk factors, convenience

  19. Consumers preferences of shopping centers in Bratislava (Slovakia

    Directory of Open Access Journals (Sweden)

    Kristína Bilková

    2016-05-01

    Full Text Available There have been changes in the shopping behavior and preferences of consumers in the post-communist countries caused by political changes after 1989. Slovakia is not an exception, and it has been observed a change not only at the consumers’ level but also in retail stores. A notable bearer of such changes was the construction of big shopping centers that were a new phenomenon in shopping. They quickly became popular and changed spatial and shopping patterns of consumers. The main aim of this study is to analyze and evaluate the shopping preferences of consumers based on the example of the capital city – Bratislava (at the level of urban districts. The database consists of results of a questionnaire survey carried out in 2011. Respondents were interviewed inside the shopping center. The partial aims focus on the analysis of consumers’ perceptions, the frequency of their shopping and the mode of transport used for shopping. One of the goals of this study is also to evaluate the perception of consumers in terms of the catchment areas of the chosen shopping center, as well as the perceptional classification of retail in the given area and the accessibility of stores.

  20. An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

    OpenAIRE

    Lavlesh Kumar Sharma; Ravindra Mohan Saxena

    2014-01-01

    In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

  1. Influence of the "Slingshot" bench press training aid on bench press kinematics and neuromuscular activity in competitive powerlifters.

    Science.gov (United States)

    Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee

    2017-02-13

    This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.

  2. E-shopping and its interactions with in-store shopping

    NARCIS (Netherlands)

    Farag, Sendy

    2006-01-01

    Nowadays, the Internet permeates society: for many people, life without the Internet is hard to imagine. E-shopping (searching and/or buying products online) has rapidly gained popularity in the past few years, and could affect consumers’ visits to stores. The goal of this research is to show which

  3. “Window Shopping, Granada, 1930s”

    Directory of Open Access Journals (Sweden)

    Mae Claxton

    2010-02-01

    Full Text Available “Window Shopping, Granada, 1930s,” Photographs, p. 16, with the gracious permission of the Eudora Welty FoundationAn African American woman, dressed in her Saturday go-to-town-best, stands outside a store window, chin in hand, contemplating the contents in the window. The image is reflective and thoughtful. What is she thinking? And what lies beyond the frame of this photograph? In Mississippi in the 1930s, could she walk into this store, perhaps try on clothes or hats, and make a purchase? I...

  4. Matching Danish Shop Stewards' Service Demands

    DEFF Research Database (Denmark)

    Navrbjerg, Steen Erik; Larsen, Trine Pernille

    process of the collective bargaining system, which adds more and more tasks on the shoulders of the shop steward and; b) the on-going trend of union mergers. While it could be expected that union merger and the reduction of local branches would entail a lower service level and at democratic deficit...... unions from 1998 to 2011. During the same period, the unions under the confederation reduced the number of branches from 886 to 334; a reduction by 62 per cent. At the same time, a process of decentralisation of the collective bargaining system has taken place since the early 1990s based on the needs...

  5. ARTIFICIAL INTELLIGENCE EFFECTIVENESS IN JOB SHOP ENVIRONMENTS

    OpenAIRE

    OMAR CASTRILLON; WILLIAM SARACHE; JAIME GIRALDO

    2011-01-01

    El objetivo del presente trabajo, es definir una nueva metodología la cual permita comparar la efectividad de algunas de las principales técnicas de inteligencia artificial (aleatorias, búsqueda tabú, minería de datos, algoritmos evolutivos). Esta metodología es aplicada en los procesos de secuenciación de la producción en ambientes job shop, en un problema con N pedidos y M máquinas, donde cada uno de los pedidos debe pasar por todas las máquinas sin importar el orden. Estas técnicas son med...

  6. Mode choice and shopping mall parking

    OpenAIRE

    Ersoy, Fulya Yüksel; Ersoy, Fulya Yuksel

    2012-01-01

    In this thesis, I analyze individuals' mode choice decisions and shopping mall's parking space pricing behavior. Individuals have three choices: first they may come to the mall by car in which case they have to park, second they may come by public transportation, or they do not visit the mall and go for their outside option. The mall determines the price of the good and the parking fee after the government sets public transportation fare. I find that the equilibrium parking fees are always le...

  7. Verification Tools Secure Online Shopping, Banking

    Science.gov (United States)

    2010-01-01

    Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

  8. Shopping Center Financing: Pricing Loan Default Risk

    OpenAIRE

    Peter Chinloy; James Musumeci

    1994-01-01

    The financing structure of a shopping center is decomposed into an income security and two put options. These put options are respectively held by the borrower against the lender for default, and by the lender against an insurer or reinsurer. The prices of the put option depend on the loan-to-value ration of the loan and on the risk of the investment. The interest rate charged on the loan is the sum of four components: a riskless rate, lender production costs, and the net price of the put opt...

  9. A New Look for the Shopping Mall

    Science.gov (United States)

    1985-01-01

    STRUCTO-FAB, a product of Owens-Corning Fiberglas Corporation, is a lightweight but extremely durable tent-like material made of Fiberglas coated with Teflon. It transmits daylight with a reduced need for artificial lighting. It is an outgrowth of a material formulated by NASA in 1967 as a new space suit fabric. Owens-Corning and DuPont provided the original material, which was the basis for Structo-Fab, a permanent architectural fabric used for shopping malls, sports stadiums, etc.

  10. EMG analysis and modelling of flat bench press using artificial ...

    African Journals Online (AJOL)

    The objective of this study was to evaluate the contribution of particular muscle groups during the Flat Bench Press (FBP) with different external loads. Additionally, the authors attempted to determine whether regression models or Artificial Neural Networks (ANNs) can predict FBP results more precisely and whether they can ...

  11. Test benches for studying the properties of car tyres

    Science.gov (United States)

    Kuznetsov, N. Yu.; Fedotov, A. I.; Vlasov, V. G.

    2017-12-01

    The article describes the design of the measuring systems of test benches used to study the properties of elastic tyres. The bench has two autonomous systems - for testing the braking properties of elastic tyres rolling in a plane parallel way and for testing tyre slip properties. The system for testing braking properties determines experimental characteristics of elastic tyres as the following dependencies: longitudinal response vs time, braking torque vs slip, angular velocity vs slip, and longitudinal response vs slip. The system for studying tyre slip properties determines both steady (dependence of the lateral response in a contact area on the slipping angle) and non-steady characteristics (time variation of the slipping angle as a result of turning from -40 to +40 degrees) of tyre slip. The article presents the diagrams of bench tests of elastic tyres. The experimental results show metrological parameters and functional capabilities of the bench for studying tyre properties in driving and braking modes. The metrological indices of the recorded parameters of the measuring system for studying tyre properties are presented in the table.

  12. Bidirectional converter interface for a battery energy storage test bench

    DEFF Research Database (Denmark)

    Trintis, Ionut; Thomas, Stephan; Blank, Tobias

    2011-01-01

    This paper presents the bidirectional converter interface for a 6 kV battery energy storage test bench. The power electronic interface consists a two stage converter topology having a low voltage dc-ac grid connected converter and a new dual active bridge dc-dc converter with high transformation...

  13. Automatic integrated testing bench for tubes in translation

    International Nuclear Information System (INIS)

    Dufayet, J.P.; Perdijon, J.

    1976-01-01

    All the nondestructive tests required for receiving the cladding tubes intended for fast nuclear reactor are integrated on this bench: quality control by eddy currents and ultra-sounds, thickness and (inner and outer) diameter measurement. The linear displacement of the tube allows very high rates to be attained [fr

  14. ReaderBench: An Integrated Cohesion-Centered Framework

    NARCIS (Netherlands)

    Dascalu, Mihai; Stavarache, Lucia Larise; Dessus, Philippe; Trausan-Matu, Stefan; McNamara, Danielle S.; Bianco, Maryse

    2015-01-01

    Dascalu, M., Stavarache, L.L., Dessus, P., Trausan-Matu, S., McNamara, D.S., & Bianco, M. (2015). ReaderBench: An Integrated Cohesion-Centered Framework. In G. Conole, T. Klobucar, C. Rensing, J. Konert & É. Lavoué (Eds.), 10th European Conf. on Technology Enhanced Learning (pp. 505–508). Toledo,

  15. Application of bench-scale biocalorimetry to photoautotrophic cultures

    NARCIS (Netherlands)

    Janssen, M.; Patino, R.; Stockar, von U.

    2005-01-01

    Bench-scale biocalorimetry (=1 L) allows for the determination of the metabolic heat flow during bioprocesses under complete control of all process conditions for extended periods of time. It can be combined with a number of on-line and off-line measurement techniques. This combination can

  16. Bench Blasting Design for Optimum Recovery of Blocks in ...

    African Journals Online (AJOL)

    In this research work, breaking factor is used in place of powder factor since breaking is required not powder. The aim of this research work is to establish a standard breaking factor for bench blasting in dimension quarries that will improve recovery. Two cases were considered. In case 1, gun powder is used for basal ...

  17. Calibration bench of flowmeters; Banc d'etalonnage de debitmetres

    Energy Technology Data Exchange (ETDEWEB)

    Bremond, J; Da Costa, D; Calvet, A; Vieuxmaire, C

    1966-07-01

    This equipment is devoted to the comparison of signals from two turbines installed in the Cabri experimental loop. The signal is compared to the standard turbine. The characteristics and the performance of the calibration bench are presented. (A.L.B.)

  18. How Traumatic Violence Permanently Changes Shopping Behavior.

    Science.gov (United States)

    Sigirci, Ozge; Rockmore, Marc; Wansink, Brian

    2016-01-01

    Traumatic experiences - such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster - change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat) exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p buying brands even when they cost more (p < 0.00). Trauma, such as combat, may change one's decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future.

  19. Evaluation of the Kids' Shop Smart tour.

    Science.gov (United States)

    Smith, Shannon C; Kalina, Laura

    2004-01-01

    We investigated the impact of the Kids' Shop Smart Tour program on participants' attitudes toward trying new foods and eating a variety of foods, as well as their recognition of Canada's Food Guide to Healthy Eating. Data were collected from parents/caregivers, students in kindergarten to grade 3, and teachers; questionnaires, quizzes, and interviews were used. Questionnaires were sent home with 947 students; 52% of parents/caregivers returned completed questionnaires. Many parents/caregivers reported that their children tried and liked unfamiliar foods on the tour. No significant difference was detected in children's willingness to try new foods or consumption of a greater variety of food before and after the tour. Quiz score differences between participants and a comparison group were not statistically significant. Of the 38 teachers who completed interviews, 97% reported that the program helped them meet curriculum requirements; 95% would recommend the resource to other teachers. Quantitative findings do not indicate that the program increases children's willingness to try new foods or eat a greater variety of food. However, qualitative data revealed that some parents observed their children trying new foods more willingly and demonstrating greater knowledge of and interest in Canada's Food Guide to Healthy Eating. Further research with validated measurement tools is recommended to establish the effectiveness of the Kids' Shop Smart Tour.

  20. How Traumatic Violence Permanently Changes Shopping Behavior

    Directory of Open Access Journals (Sweden)

    Ozge Sigirci

    2016-09-01

    Full Text Available Traumatic experiences – such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster – change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p < 0.01. In contrast, those who had experienced a light trauma were more influenced by ads and more open to buying brands even when they cost more (p < 0.00. Trauma, such as combat, may change one’s decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future.

  1. Ant Foraging Behavior for Job Shop Problem

    Directory of Open Access Journals (Sweden)

    Mahad Diyana Abdul

    2016-01-01

    Full Text Available Ant Colony Optimization (ACO is a new algorithm approach, inspired by the foraging behavior of real ants. It has frequently been applied to many optimization problems and one such problem is in solving the job shop problem (JSP. The JSP is a finite set of jobs processed on a finite set of machine where once a job initiates processing on a given machine, it must complete processing and uninterrupted. In solving the Job Shop Scheduling problem, the process is measure by the amount of time required in completing a job known as a makespan and minimizing the makespan is the main objective of this study. In this paper, we developed an ACO algorithm to minimize the makespan. A real set of problems from a metal company in Johor bahru, producing 20 parts with jobs involving the process of clinching, tapping and power press respectively. The result from this study shows that the proposed ACO heuristics managed to produce a god result in a short time.

  2. Comparison of concentric and eccentric bench press repetitions to failure.

    Science.gov (United States)

    Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E

    2015-04-01

    Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.

  3. An Approach to Teaching Young Children about "The Shop."

    Science.gov (United States)

    Pramling, Ingrid

    An attempt was made to increase Swedish preschool children's understanding of aspects of commercial enterprise, particularly those of "the shop," by introducing a specific didactic approach to preschool education. Of particular interest were two aspects of the shop: advertising and the principle of trade. A total of 77 children up to 7 years of…

  4. Attitude of students towards online shopping of agricultural products ...

    African Journals Online (AJOL)

    The study examined the attitude of students towards online shopping in selected tertiary institutions in Ogun state. One hundred and thirty-five respondents were sampled using multistage and simple random sampling procedures. Variables measured included their attitude towards online shopping, the factors that affect ...

  5. E-shopping in the Netherlands: does geography matter?

    NARCIS (Netherlands)

    Farag, Sendy; Weltevreden, J.W.J.; Rietbergen, T. van; Dijst, M.J.; Oort, F.G. van

    2006-01-01

    Why consumers shop via the Internet, is a frequently asked question. As yet, the impact of spatial variables on e-shopping has received little attention. In this paper we report our investigation of the spatial distribution of Internet users and online buyers in the Netherlands for the time period

  6. The architectural foundations for agent-based shop floor control

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1998-01-01

    simulation and cell controlenabling technologies. In order to continuethis research effortnew concepts and theories for shop floor control are investigated.This paper reviews the multi-agent concept aimed at investigatingits potential use in shop floor control systems. The paper willalso include a survey...

  7. Smart Shopping Carts: How Real-Time Feedback Influences Spending

    NARCIS (Netherlands)

    Ittersum, van K.; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

    2013-01-01

    Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

  8. Smart shopping carts : How real-time feedback influences spending

    NARCIS (Netherlands)

    van Ittersum, Koert; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

    Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

  9. Health Risk Screening Practices of Pharmacy and Chemist Shops in ...

    African Journals Online (AJOL)

    Methodology: Fifty two pharmacy and chemist shops were selected using simple random number sampling technique from 120 registered pharmacy and chemist shops in Jos Metropolis. A semi-structured questionnaire, examining the screening practice of the sales persons was interviewer administered to all the sales ...

  10. Metalworking Lathe; Machine Shop Work--Intermediate: 9555.03.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared as a guide to assist the instructor to plan systematically and to present meaningful lessons to provide the training needed by the machine shop student. This is the third course of instruction in a series of machine shop work courses. The six blocks of instruction contained in this outline are designed to…

  11. Smart shopping carts : How real-time feedback influences spending

    NARCIS (Netherlands)

    van Ittersum, Koert; Wansink, B.; Pennings, J.M.E.; Sheehan, D.

    2013-01-01

    Although interest in smart shopping carts is increasing, both retailers and consumer groups have concerns about how real-time spending feedback will influence shopping behavior. Building on budgeting and spending theories, the authors conduct three lab and grocery store experiments that robustly

  12. FME Carpentry Shop Keeps Facility in Good Repair | Poster

    Science.gov (United States)

    By Peggy Pearl, Contributing Writer Did you know that what most people call the Carpentry Shop at Facilities Maintenance and Engineering (FME) is actually made up of the three crafts, woodcrafting, painting, and locksmithing?  On any given day, throughout the Frederick National Laboratory campus, you may find shop staff utilizing an assortment of tools and a wide range of

  13. THE LIFE CYCLE OF SHOPPING CENTERS AND POSSIBLE REVITALIZATION STRATEGIES

    Directory of Open Access Journals (Sweden)

    Dabija Dan Cristian

    2009-05-01

    Full Text Available This paper addresses the concept of shopping center life cycle. The concept is considered a possible explanation for the death of certain types of shopping centers and birth of others. Of course that there are also other theories that explains this evolut

  14. Print and Internet Catalog Shopping: Assessing Attitudes and Intentions.

    Science.gov (United States)

    Vijayasarathy, Leo R.; Jones, Joseph M.

    2000-01-01

    Findings of an empirical study that compared individuals' attitudes and intentions to shop using print and Internet catalogs suggest that individuals perceived differences between the two catalog media on the shopping factors of reliability, tangibility, and consumer risk. Product value, pre-order information, post-selection information, shopping…

  15. Constraint-based job shop scheduling with ILOG SCHEDULER

    NARCIS (Netherlands)

    Nuijten, W.P.M.; Le Pape, C.

    1998-01-01

    We introduce constraint-based scheduling and discuss its main principles. An approximation algorithm based on tree search is developed for the job shop scheduling problem using ILOG SCHEDULER. A new way of calculating lower bounds on the makespan of the job shop scheduling problem is presented and

  16. Future Shop: A Model Career Placement & Transition Laboratory.

    Science.gov (United States)

    Floyd, Deborah L.; And Others

    During 1988-89, the Collin County Community College District (CCCCD) conducted a project to develop, implement, and evaluate a model career laboratory called a "Future Shop." The laboratory was designed to let users explore diverse career options, job placement opportunities, and transfer resources. The Future Shop lab had three major components:…

  17. FLOW-SHOP SCHEDULING WITH MULTIPLE OPERATIONS AND TIME LAGS

    NARCIS (Netherlands)

    RIEZEBOS, J; GAALMAN, GJC; GUPTA, JND

    A scheduling system is proposed and developed for a special type of flow shop. Ln this flow shop there is one machine at each stage. A job may require multiple operations at each stage. The first operation of a job on stage j cannot start until the last operation of the job on stage j - 1 has

  18. Improving Interaction between NGO's, Science Shops and Universities

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2005-01-01

    An overview of the results from the INTERACTS research project: Improving Interaction between NGOs, Universities and Science Shops: Experiences and Expectations, running 2002-2004......An overview of the results from the INTERACTS research project: Improving Interaction between NGOs, Universities and Science Shops: Experiences and Expectations, running 2002-2004...

  19. Workload control in job shops, grasping the tap

    NARCIS (Netherlands)

    Land, Martin Jaap

    2004-01-01

    The term job shops is used to indicate companies that produce customer-specific components in small batches. Jobs (production orders) in a job shop are characterised by a large variety of routings and operation processing times. This variety, combined with irregular order arrivals, generally leads

  20. The Impact of Price Disclosure on Dynamic Shopping Decisions

    NARCIS (Netherlands)

    B.G.C. Dellaert (Benedict); V.Y. Golounov (Vladislav); J. Prabhu (Jaideep)

    2005-01-01

    textabstractA potentially powerful way to assist consumers in making dynamic shopping decisions is to disclose price information to them before they shop, for example by posting prices on the Internet. This paper addresses the differential impact of disclosing either only current, or both current

  1. A cross-cultural comparison of expatriates’ shopping behavior

    NARCIS (Netherlands)

    Wijnen, G.J.; Kemperman, A.D.A.M.; Janssen, I.I.

    2012-01-01

    Explored is how shopping centre attributes can be adapted to culture-related shopping behaviour of expatriates. While awareness of consumer ethnicity and effectiveness of culture-based market segmentation are on-going and relevant topics in retailing, there is only limited information available on

  2. Authorizer Shopping: Lessons from Experience and Ideas for the Future

    Science.gov (United States)

    Boast, Lyria; Ellison, Shonaka; Hassel, Bryan C.; Conlan, Sean; Rausch, M. Karega

    2016-01-01

    As charter school authorizers and states have increased performance expectations and grown less hesitant to close failing schools, "authorizer shopping" has emerged as a growing threat to overall charter school quality. Authorizer shopping happens when a charter school chooses or changes its authorizer specifically to avoid…

  3. Typically Female Features in Hungarian Shopping Tourism

    Directory of Open Access Journals (Sweden)

    Gábor Michalkó

    2006-06-01

    Full Text Available Although shopping has been long acknowledged as a major tourist activity, the extent and characteristics of shopping tourism have only recently become the subject of academic research and discussion. As a contribution to this field of knowledge, the paper presents the characteristics of shopping tourism in Hungary, and discusses the typically female features of outbound Hungarian shopping tourism. The research is based on a survey of 2473 Hungarian tourists carried out in 2005. As the findings of the study indicate, while female respondents were altogether more likely to be involved in tourist shopping than male travellers, no significant difference was experienced between the genders concerning the share of shopping expenses compared to their total travel budget. In their shopping behaviour, women were typically affected by price levels, and they proved to be both more selfish and more altruistic than men by purchasing more products for themselves and for their family members. The most significant differences between men and women were found in their product preferences as female tourists were more likely to purchase typically feminine goods such as clothes, shoes, bags and accessories, in the timing of shopping activities while abroad, and in the information sources used by tourists, since interpersonal influences such as friends’, guides’ and fellow travellers’ recommendations played a higher role in female travellers’ decisions.

  4. Attitude theory applied to in-store and online shopping

    NARCIS (Netherlands)

    Dijst, M.J.; Farag, S.; Schwanen, T.

    2005-01-01

    In this study, we investigated whether our understanding of adoption of e-shopping and instore shopping could be advanced through the application of attitude theory. A shortcoming of the analytical frameworks and models featured in attitude theory is that they do not address the issue of what

  5. Cost-benefit of bench terraces, a case study in Peru

    NARCIS (Netherlands)

    Posthumus, H.; Graaff, de J.

    2005-01-01

    Soil and water conservation measures like bench terraces can reduce erosion in highland crop production. A cost-benefit analysis for 11 cases of bench terraces was undertaken on the basis of both measured data and data obtained from farmers. It showed that the profitability of bench terraces was

  6. MATERIALISTIC VALUES, SHOPPING, AND LIFE SATISFACTION IN ROMANIA

    Directory of Open Access Journals (Sweden)

    VALERIU FRUNZARU

    2015-11-01

    Full Text Available Numerous studies have shown that generally materialists are less happy than those lower in materialism. Several studies confirm that people who experience a lower level of life satisfaction are more interested in shopping; therefore materialism determines directly and indirectly (mediated by life satisfaction the desire of going shopping. There are only few studies that deal with this topic within Romanian consumers. The conceptual model proposed here was tested on a convenience sample of 390 Romanians. Using structural equation modelling, our findings confirm the hypothetical model only partially. Materialism leads to life dissatisfaction and shopping, but life dissatisfaction does not increase shopping. To the contrary, there is a positive relationship between life satisfaction and the desire for shopping. One possible explanation is that Romanians perceive materialism as a positive attitude. Anyway, nuances should be considered regarding the role of money and possession in bringing life satisfaction

  7. Effects of Website Interactivity on Online Retail Shopping Behavior

    Science.gov (United States)

    Islam, Hafizul

    Motivations to engage in retail online shopping can include both utilitarian and hedonic shopping dimensions. To cater to these consumers, online retailers can create a cognitively and esthetically rich shopping environment, through sophisticated levels of interactive web utilities and features, offering not only utilitarian benefits and attributes but also providing hedonic benefits of enjoyment. Since the effect of interactive websites has proven to stimulate online consumer’s perceptions, this study presumes that websites with multimedia rich interactive utilities and features can influence online consumers’ shopping motivations and entice them to modify or even transform their original shopping predispositions by providing them with attractive and enhanced interactive features and controls, thus generating a positive attitude towards products and services offered by the retailer. This study seeks to explore the effects of Web interactivity on online consumer behavior through an attitudinal model of technology acceptance.

  8. Nurses' shop stewards and their collaboration with management

    DEFF Research Database (Denmark)

    Bild, Tage; Hjalager, Anne-Mette; Lassen, Morten Staun

    2009-01-01

    Purpose - This study investigates the collaboration between Danish nurses' shop stewards and workplace management. The aim of the study is to track changes in workplace climate after a major structural reform of the health sector. Design/methodology/approach - The data source for the study...... is a comprehensive survey among union representatives in the health and care sectors. Findings - Generally, and not surprisingly, shops stewards maintain closer relations and a higher degree of loyalty to the nearest managers rather than management at higher levels in the hierarchy. It can also be demonstrated...... that more experienced shop stewards, those who have been employed in this position and in the workplace for the longest terms have more affirmative relations to management than less experienced shop stewards with shorter tenure. Those shop stewards who spend much time on the entitled duties are rewarded...

  9. Impact of e-shopping on shopping-related travel behaviour: Analyses of the Netherlands Mobility Panel data.

    NARCIS (Netherlands)

    Hoogendoorn-Lanser, S.; Olde Kalter, Marie-José José Theresia; Schaap, Nina

    2015-01-01

    From the moment e-shopping emerged, there are speculations about the impact that would have on personal mobility. Questions about the impact of e-shopping on mobility increase due to media coverage on the sharp increase in turnover of Internet purchases and the increasing number of consumers that

  10. The Effects of Bench Press Variations in Competitive Athletes on Muscle Activity and Performance.

    Science.gov (United States)

    Saeterbakken, Atle Hole; Mo, Dag-André; Scott, Suzanne; Andersen, Vidar

    2017-06-01

    The aim of the study was to compare the EMG activity performing 6RM competition style bench press (flat bench-wide grip) with 1) medium and narrow grip widths on a flat bench and 1) inclined and declined bench positions with a wide grip. Twelve bench press athletes competing at national and international level participated in the study. EMG activity was measured in the pectoralis major, anterior and posterior deltoid, biceps brachii, triceps brachii and latissimus dorsi. Non-significant differences in activation were observed between the three bench positions with the exception of 58.5-62.6% lower triceps brachii activation, but 48.3-68.7% greater biceps brachii activation in the inclined bench compared with the flat and declined bench position. Comparing the three grip widths, non-significant differences in activations were observed, with the exception of 25.9-30.5% lower EMG activity in the biceps brachii using a narrow grip, compared to the medium and wide grip conditions. The 6-RM loads were 5.8-11.1% greater using a medium and wide grip compared to narrow grip width and 18.5-21.5% lower in the inclined bench position compared with flat and declined. Comparing the EMG activity during the competition bench press style with either the inclined and declined bench position (wide grip) or using a narrow and medium grip (flat bench), only resulted in different EMG activity in the biceps- and triceps brachii. The 6RM loads varied with each bench press variation and we recommend the use of a wide grip on a flat bench during high load hypertrophy training to bench press athletes.

  11. An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems

    Directory of Open Access Journals (Sweden)

    Chandramouli Anandaraman

    2011-10-01

    Full Text Available Job Shop Scheduling Problem (JSSP and Flow Shop Scheduling Problem (FSSP are strong NP-complete combinatorial optimization problems among class of typical production scheduling problems. An improved Sheep Flock Heredity Algorithm (ISFHA is proposed in this paper to find a schedule of operations that can minimize makespan. In ISFHA, the pairwise mutation operation is replaced by a single point mutation process with a probabilistic property which guarantees the feasibility of the solutions in the local search domain. A Robust-Replace (R-R heuristic is introduced in place of chromosomal crossover to enhance the global search and to improve the convergence. The R-R heuristic is found to enhance the exploring potential of the algorithm and enrich the diversity of neighborhoods. Experimental results reveal the effectiveness of the proposed algorithm, whose optimization performance is markedly superior to that of genetic algorithms and is comparable to the best results reported in the literature.

  12. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    OpenAIRE

    Carolyn Chin; Paula Swatman; Paula Swatman

    2005-01-01

    Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is nee...

  13. Researchers' Night: science at the shops

    CERN Multimedia

    Corinne Pralavorio

    2015-01-01

    On 25 September, as part of European Researchers’ Night, CERN and POPScience joined forces to welcome the public at the Balexert shopping centre in Geneva. The Bulletin presents its gallery of photographs from the exciting and educational event.   Science through comic strips, games, cinema and television: POPScience approaches scientific questions through popular culture, with great success! Around 500 children attended the sessions for schools at Balexert's multiplex cinema, and 600 spectators flocked to the public screenings.  Using the big screen, scientists, directors and authors were on hand to disentangle truth from untruths and science from science fiction. The guests, some of whom appeared in person and others via video link, included Jorge Cham, author of PhD Comics and the spin-off film; David Saltzberg, physicist at CMS and scientific consultant for the television series The Big Bang Theory; Kip Thorne, scientific consultant for the film Interstellar; Lawrence ...

  14. Scheduling job shop - A case study

    Science.gov (United States)

    Abas, M.; Abbas, A.; Khan, W. A.

    2016-08-01

    The scheduling in job shop is important for efficient utilization of machines in the manufacturing industry. There are number of algorithms available for scheduling of jobs which depend on machines tools, indirect consumables and jobs which are to be processed. In this paper a case study is presented for scheduling of jobs when parts are treated on available machines. Through time and motion study setup time and operation time are measured as total processing time for variety of products having different manufacturing processes. Based on due dates different level of priority are assigned to the jobs and the jobs are scheduled on the basis of priority. In view of the measured processing time, the times for processing of some new jobs are estimated and for efficient utilization of the machines available an algorithm is proposed and validated.

  15. Events Marketing Model of Dubai Shopping Festival

    Directory of Open Access Journals (Sweden)

    K. Prakash Vel

    2014-12-01

    Full Text Available Cities and places have become major destinations through taking the extra mile of creativity and offering a well-researched package of offerings through systematically planned events. One such leading example in the list of successful festivals that have earned a global reputation due to its uniqueness and creative event offerings is the Dubai Shopping Festival (DSF in the United Arab Emirates. This paper is a case study based description of the internal and external drivers involved in planning and implementing a global event successfully and has captured the various drivers through a structured framework. The analysis serves as a good addition to the existing literature on ‘Events Marketing’. 

  16. Methods in Mapping Usability of Malaysia’s Shopping Centre

    Directory of Open Access Journals (Sweden)

    Abdul Ghani Aida Affina

    2016-01-01

    Full Text Available With more than 200 number of shopping centre in Klang Valley itself, we the consumer actually have vast of choices. Instead of the machineries varieties from the lower class product till the posh one, each of those shopping centres eventually offers the typical product same as others. Those shopping centers are competing with each other and in great endeavour to attract more consumers, to visit and spend. As for the visitor, the typical product and boring ambience seems similar in all malls, and is looking something beyond the standard. Something that promising quality embedded in shopping centre which evokes the various emotions of the user along their journey in malls. This quality is known as usability. Usability; as defined generally is a global user’s experience response with product, environment, service or facilities. It is an assessment in extracting the qualities of shopping centre design. In mapping it, there are a few synthesizing methods to implement it. Therefore, this paper purposely to review the method that been used in usability of Malaysia’s shopping centre research with a few references on previous research done in usability assessment by predecessor’s scholars. With the accentuation on three elements that anchoring what the usability is: effectiveness, efficient and satisfaction, it is hope that this overview can lead other researcher in portraying its relationship with the quality and ‘user friendly’ design of shopping centre.

  17. A new BETSI test bench at CEA/Saclay

    International Nuclear Information System (INIS)

    Nyckees, S.; Adroit, G.; Delferriere, O.; Duperrier, R.; Gauthier, Y.; Gobin, R.; Harrault, F.; Mateo, C.M.; Napoly, O.; Pottin, B.; Sauce, Y.; Senee, F.; Tuske, O.; Vacher, T.

    2012-01-01

    In the nineties, CEA has undertaken to develop the production of high intensity light ion beams from plasma generated by electron cyclotron resonance (ECR). Important results were obtained with the SILHI source in pulsed or continuous mode. Presently, CEA/Saclay is now involved in the construction of different injectors dedicated to large infrastructures like IFMIF or SPIRAL2. Other installations are also interested by high intensity ion sources like ESS or FAIR. To improve and test new sources, a new test bench named BETSI (Banc d'Etudes et de Tests des Sources d'Ions) has been operating for several years. Low energy beam line diagnostics consist of a Faraday cup, cameras and a species analyzer. The SILHI emittance scanner can also be installed on the beam line. On this test bench, different permanent magnet source configurations are tested. The paper is followed by the associated poster. (authors)

  18. Wind Generators Test Bench. Optimal Design of PI Controller

    Directory of Open Access Journals (Sweden)

    TUDORACHE, T.

    2011-08-01

    Full Text Available This paper proposes a novel and robust strategy for the optimal design of the drive system integrated in a wind generators test bench. The PI regulator coefficients used in control systems are usually computed based on simplified hypotheses and then tuned manually so as the system response meet certain specifications in terms of stability, accuracy and speed. The proposed methodology permits the automatic identification of PI regulator coefficients using intelligent optimization algorithms, the initial guess for the search procedure being determined based on particular simplified hypotheses. The proposed procedure can help the design engineers to drastically reduce the effort for finding the best PI regulator coefficients offering a range of feasible solutions depending on the imposed optimum criteria. The characteristics and performances of the optimization strategy are highlighted by using it for the design of a DC motor drive system used to simulate the wind prime mover integrated in a wind generators test bench.

  19. Improvement of bench life-tests for automotive batteries

    Science.gov (United States)

    Richter, G.

    A common method for rating the endurance of automotive batteries is the bench life-test according to DIN, IEC, SAE or JIS. With an increasing number of maintenance-free batteries on the market, the application of these tests becomes more problematic. This is due to a step-by-step capacity decline during cycling if the content of autimony in the grid-alloy is decreased. The degradation in performance is caused by the phenomenon of acid stratification. Because this debilitating effect occurs only rarely in service (vehicle movement) if charging and discharging is well balanced, there is a need for a new bench life-test with conditions that are more representative of practical conditions. Research has shown that the main changes should be: (i) an accelerated (moved) battery during cycling; (ii) slightly lower charging or discharging capacity amplitude, also with a lower mean value.

  20. The R and D D's bearing test benches

    International Nuclear Information System (INIS)

    Vialettes, J.M.

    1997-01-01

    In power generation plants, rotating machines are involved in energy transformation processes and safety systems. The bearings supporting the rotors and the thrust bearings play a crucial role in the reliability of these machines. The phenomena encountered straddle several disciplines: hydrodynamics, tribology, thermomechanics, materials and vibrations in a specific environment, namely: thin fluid film, solid mechanical components and shaft rotation. Means of analysing the behaviour of these components (bearings and thrust bearings) have been developed and implemented. These consists of the EDYOS (Etude Dynamique des Organes de Supportage) code for dynamically studying bearing devices and several related bench tests. In reality, in order to understand the complex physical phenomena encountered in these components, it is vital to carry out analyses and experimental validations. Since these investigations cannot be carried out on actual machines, test benches have been built which can subject the sample bearings to the equivalent stresses. (author)

  1. BWR Mark I pressure suppression study: bench mark experiments

    International Nuclear Information System (INIS)

    Lai, W.; McCauley, E.W.

    1977-01-01

    Computer simulations representative of the wetwell of Mark I BWR's have predicted pressures and related phenomena. However, calculational predictions for purposes of engineering decision will be possible only if the code can be verified, i.e., shown to compute in accord with measured values. Described in the report is a set of single downcomer spherical flask bench mark experiments designed to produce quantitative data to validate various air-water dynamic computations; the experiments were performed since relevant bench mark data were not available from outside sources. Secondary purposes of the study were to provide a test bed for the instrumentation and post-experiment data processing techniques to be used in the Laboratory's reactor safety research program and to provide additional masurements for the air-water scaling study

  2. Development of training simulator based on critical assemblies test bench

    International Nuclear Information System (INIS)

    Narozhnyi, A.T.; Vorontsov, S.V.; Golubeva, O.A.; Dyudyaev, A.M.; Il'in, V.I.; Kuvshinov, M.I.; Panin, A.V.; Peshekhonov, D.P.

    2007-01-01

    When preparing critical mass experiment, multiplying system (MS) parts are assembled manually. This work is connected with maximum professional risk to personnel. Personnel training and keeping the skill of working experts is the important factor of nuclear safety maintenance. For this purpose authors develop a training simulator based on functioning critical assemblies test bench (CATB), allowing simulation of the MS assemblage using training mockups made of inert materials. The control program traces the current status of MS under simulation. A change in the assembly neutron physical parameters is mapped in readings of the regular devices. The simulator information support is provided by the computer database on physical characteristics of typical MS components The work in the training mode ensures complete simulation of real MS assemblage on the critical test bench. It makes it possible to elaborate the procedures related to CATB operation in a standard mode safely and effectively and simulate possible abnormal situations. (author)

  3. On line isotopic separator test benches at GANIL

    International Nuclear Information System (INIS)

    Anne, R.; Bru, B.; Joubert, A.; Leroy, R.; Obert, J.; Putaux, J.C.; Liang, C.F.; Paris, P.; Orr, N.; Steckmeyer, J.C.

    1993-01-01

    A first version of isotopic separator on line test bench has been built in order to test the feasibility of the production of radioactive species from 96 MeV/u of 20 Ne impinging a thick target of MgO. This test bench was equipped with a very compact ECR ion source (Nanogan) entirely made from permanent magnets and operating at 10 Ghz. 18 Ne 2,4+ ; 19N e 1,2,3,4+ and 23,24 Ne 1+ has been produced and ionized. A new more performing separator (SIRa) allowing the use of different types of ion sources will be completed by the end of 1993. (author) 4 refs., 4 figs., 1 tab

  4. Why do you shop there? A mixed methods study mapping household food shopping patterns onto weekly routines of black women.

    Science.gov (United States)

    DiSantis, Katherine Isselmann; Hillier, Amy; Holaday, Rio; Kumanyika, Shiriki

    2016-01-28

    The effectiveness of initiatives to increase healthy food access may be affected by where people decide to shop. People with poor neighborhood access to large grocery stores develop shopping patterns that require traveling to other areas, and some people who do have neighborhood access also travel elsewhere for food shopping. We sought to gain an understanding of household food shopping patterns in a sample of Black women in terms of where they shopped and why. All food shopping trips of 35 low- or middle/high-income black mothers or caregivers living with at least one child were identified from grocery shopping receipts collected over four consecutive weeks. Food shopping locations were mapped along with locations of participants' homes and other places they visited during weekly routine travels (e.g. work, child's school). Semi-structured individual interviews elicited narrative information about whether and how grocery shopping trips were linked to routine travels. Inductive content analysis was utilized to identify emergent themes from interviews. Themes were considered in relation to geospatial distances and travel patterns identified through mapping of participants' shopping. Participants shopped at an average of six different stores, traveling on average a total of 35 miles (sd = 41) (Euclidian distance) over the four weeks. The most frequented store was within a mile of home (57%) or home or another place visited in the weekly routine for about 77% of participants. Interview results emphasized the concept of convenience which referred to geographical proximity to the home or routine destinations and also to potential to save time because several stores were co-located or because the store layout was easy to navigate and familiar. Store selection also related to mode of transportation, pricing, and family preference for certain foods. People have specific reasons for consistently shopping in areas outside of their neighborhood of residence. Incorporating

  5. Energy benchmarking for shopping centers in Gulf Coast region

    International Nuclear Information System (INIS)

    Juaidi, Adel; AlFaris, Fadi; Montoya, Francisco G.; Manzano-Agugliaro, Francisco

    2016-01-01

    Building sector consumes a significant amount of energy worldwide (up to 40% of the total global energy); moreover, by the year 2030 the consumption is expected to increase by 50%. One of the reasons is that the performance of buildings and its components degrade over the years. In recent years, energy benchmarking for government office buildings, large scale public buildings and large commercial buildings is one of the key energy saving projects for promoting the development of building energy efficiency and sustainable energy savings in Gulf Cooperation Council (GCC) countries. Benchmarking would increase the purchase of energy efficient equipment, reducing energy bills, CO_2 emissions and conventional air pollution. This paper focuses on energy benchmarking for shopping centers in Gulf Coast Region. In addition, this paper will analyze a sample of shopping centers data in Gulf Coast Region (Dubai, Ajman, Sharjah, Oman and Bahrain). It aims to develop a benchmark for these shopping centers by highlighting the status of energy consumption performance. This research will support the sustainability movement in Gulf area through classifying the shopping centers into: Poor, Usual and Best Practices in terms of energy efficiency. According to the benchmarking analysis in this paper, the shopping centers best energy management practices in the Gulf Coast Region are the buildings that consume less than 810 kW h/m"2/yr, whereas the poor building practices are the centers that consume greater than 1439 kW h/m"2/yr. The conclusions of this work can be used as a reference for shopping centres benchmarking with similar climate. - Highlights: •The energy consumption data of shopping centers in Gulf Coast Region were gathered. •A benchmarking of energy consumption for the public areas for the shopping centers in the Gulf Coast Region was developed. •The shopping centers have the usual practice in the region between 810 kW h/m"2/yr and 1439 kW h/m"2/yr.

  6. Vape shops: who uses them and what do they do?

    Science.gov (United States)

    Pattinson, Julie; Lewis, Sarah; Bains, Manpreet; Britton, John; Langley, Tessa

    2018-04-23

    'Vape shops' are a popular source for buying electronic cigarettes (e-cigarettes) and related products. The products that vape shops sell, their marketing techniques and the extent to which they provide information or encouragement to smokers to quit tobacco use, as well as the patterns of tobacco and e-cigarette use of their customers are not well understood. We conducted cross-sectional surveys in vape shops in the East Midlands region of the United Kingdom, one with shop staff (n = 41), and one with customers (n = 197). The majority of customers (84%) currently used e-cigarettes. Among current vapers, 19% were dual users and 78% had quit smoking. Over half of vapers reported using a lower level of nicotine in their current e-liquid than when they started using e-cigarettes. There was a wide variety in products and price ranges between the shops. Many staff reported that customers ask for information about quitting smoking (90%). Less than half reported providing smoking cessation advice, although 76% of staff reported feeling confident about delivering cessation advice to customers who ask for it. Just under half of customers and shop staff said they thought it was appropriate to deliver formal in-store smoking cessation support. The majority of vape shop customers are vapers who have quit smoking. Shop staff play a central role in providing customers with product information, and many provide smoking cessation advice. Further research is needed to investigate the potential for smoking cessation interventions in vape shops, including the extent to which these would appeal to non-vapers.

  7. Simulation of the LHC injection kicker impedance test bench

    CERN Document Server

    Tsutsui, H

    2003-01-01

    The coupling impedance measurements of the LHC injection kicker test bench are simulated by HFSS code. The simulation gives qualitatively good agreement with the measurement. In order to damp the resonances, some ferrite rings are tested in the simulation. Longitudinal resonances are damped by a ferrite ring of large tan$\\delta_{\\mu}$. The effect of the ferrite ring is small for damping the transverse impedance resonance around 30 MHz.

  8. Study and designing of the ''caliprax'' measurement bench

    International Nuclear Information System (INIS)

    Barriere, J.Ch.

    2001-09-01

    Probing the matter in order to check its elementary constituents, that is the goal of the particle physic. In this field, the experiments consist in colliding highly energetic particle beams and observing the new born particles. These observations are based on big particle detectors whose running is dependant on the precise knowledge of their geometry (position of the detection chambers). To achieve this, the detectors are equipped with alignment sensors, which have to be calibrated before. This document describes the study and the making of a calibration bench for the 'Praxial' (PRoximity AXIAL) type sensors, and other works related to these sensors. In a first part, we determine and apply a method to set the tools used to fix the sensor stands on the detection chambers. These settings are made with the use of a tridimensional measuring machine. Then, we study the stands themselves. These investigations concern mechanics: positioning quality of the sensors in their stands, bending of the supports due to the tightening. In this part too, the studies are in the field of dimensional metrology. After this, the works are reoriented toward the bench, with the choice of the displacement sensors among two different technologies: optical, with the Rasnik system, and mechanical, with linear probes as LVDT (Linear Variable Differential Transformer). Following the discovery of an ambiguity on the Rasnik system, we go on the tests to understand its behaviour. We introduce the theory of the alignment sensors calibration, which is based on a minimization calculation. The computer programs are explained in a chapter, and in an other, the implementation of the quality assurance procedures. An other part describes the mechanical studies and the problems they cause. Because of a delay onset of the project, we make a model of the bench. This dummy allows us to test every single function of the final bench. With this device, we record manually the first calibration data and use them

  9. E-COMMERCE FACTORS INFLUENCING CONSUMERS‘ ONLINE SHOPPING DECISION

    Directory of Open Access Journals (Sweden)

    Živilė Baubonienė

    2015-12-01

    Full Text Available Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the benefits received by buyers making purchases online. Specifically, the research explores how online shopping can be affected by such factors as age, gender or occupation. Design/methodology/approach – The factors that affect the consumer online shopping have been disclosed through quantitative research by analysing data collected via a web‐based questionnaire survey. The sample consisted of 183 Lithuanian consumers who were purchasing online. Findings –The empirical findings of this study indicate that the main factors influencing consumers to shop online are convenience, simplicity and better price. Analysis of socio-demographical characteristics such as gender has shown that men shop more often online because of the lower price. Respondents of the 25–35 year age group more often choose shopping online for such reasons as lack of time and a wide range of products. The most beneficial factor of shopping online was identified as a possibility to compare prices and buy at a lower price. Research limitations/implications – This study was done regarding only general conditions and the findings may not necessarily be applicable to a particular e-business. Therefore, in the future it would be highly encouraged to examine consumers’ attitudes towards specialized online shopping websites to look for differences by kind of products or services.Practical implications – Attributes identified by this study could help e-business developers to forme their

  10. Job shop scheduling with makespan objective: A heuristic approach

    Directory of Open Access Journals (Sweden)

    Mohsen Ziaee

    2014-04-01

    Full Text Available Job shop has been considered as one of the most challenging scheduling problems and there are literally tremendous efforts on reducing the complexity of solution procedure for solving job shop problem. This paper presents a heuristic method to minimize makespan for different jobs in a job shop scheduling. The proposed model is based on a constructive procedure to obtain good quality schedules, very quickly. The performance of the proposed model of this paper is examined on standard benchmarks from the literature in order to evaluate its performance. Computational results show that, despite its simplicity, the proposed heuristic is computationally efficient and practical approach for the problem.

  11. E-Commerce Performance. Shopping Cart Key Performance Indicators

    Directory of Open Access Journals (Sweden)

    Mihaela I. MUNTEAN

    2016-01-01

    Full Text Available In an e-commerce performance framework is important to identify the key performance indicators that measure success and together provide the greatest context into the business perfor-mance. Shopping carts are an essential part of ecommerce, a minimal set of key performance indicators being the subject of our debate. The theoretical approach is sustained by a case study, an e-shop implemented using PHP and MySQL, for simulating main business processes within the considered performance framework. Our approach opens a perspective for future research using additional indicators in order to properly evaluate the global performance of any e-shop.

  12. SHOP: scaffold hopping by GRID-based similarity searches

    DEFF Research Database (Denmark)

    Bergmann, Rikke; Linusson, Anna; Zamora, Ismael

    2007-01-01

    A new GRID-based method for scaffold hopping (SHOP) is presented. In a fully automatic manner, scaffolds were identified in a database based on three types of 3D-descriptors. SHOP's ability to recover scaffolds was assessed and validated by searching a database spiked with fragments of known...... scaffolds were in the 31 top-ranked scaffolds. SHOP also identified new scaffolds with substantially different chemotypes from the queries. Docking analysis indicated that the new scaffolds would have similar binding modes to those of the respective query scaffolds observed in X-ray structures...

  13. Online Infrastructure in Supply Chain for Hardware Shops

    OpenAIRE

    Sørensen , Karl ,

    2014-01-01

    Part 4: Private Services; International audience; This article describes how the Scandinavian network communication system DATEX was used to build an online infrastructure in a retail chain of privately owned hardware shops and Do-It-Yourself (DIY) centers. The solution gave the staff in the shops the possibility to use EDP as early as in 1983. The Internet did not exist at the time. EDP was not part of the daily work in the shop and was for most employees something unknown that took place at...

  14. NON-FUNCTIONAL SHOPPING MOTIVES AMONG IRANIAN CONSUMERS

    Directory of Open Access Journals (Sweden)

    Shahriar AZIZI

    2011-01-01

    Full Text Available This study aims to explore the non functional shopping motives among Iranian consumers. In addition, the effects of marital status, gender, age and residential region as an indicator for social class on the non-functional shopping motives are investigated. This paper uses a self-reported and 15 items questionnaire. The analysis is done based on 363 returned and usable questionnaires. Multivariate analysis of variance is applied for this study. MANOVA results show that marital status, gender, age and region have different significant effects on the non-functional shopping motives among Iranian consumers.

  15. A virtual model of the bench press exercise.

    Science.gov (United States)

    Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre

    2009-08-07

    The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.

  16. Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors.

    Science.gov (United States)

    Rose, Susan; Dhandayudham, Arun

    2014-06-01

    Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science - Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA.

  17. A comparison of muscle activation between a Smith machine and free weight bench press.

    Science.gov (United States)

    Schick, Evan E; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Tran, Tai T; Uribe, Brandon P

    2010-03-01

    The bench press exercise exists in multiple forms including the machine and free weight bench press. It is not clear though how each mode differs in its effect on muscle activation. The purpose of this study was to compare muscle activation of the anterior deltoid, medial deltoid, and pectoralis major during a Smith machine and free weight bench press at lower (70% 1 repetition maximum [1RM]) and higher (90% 1RM) intensities. Normalized electromyography amplitude values were used during the concentric phase of the bench press to compare muscle activity between a free weight and Smith machine bench press. Participants were classified as either experienced or inexperienced bench pressers. Two testing sessions were used, each of which entailed either all free weight or all Smith machine testing. In each testing session, each participant's 1RM was established followed by 2 repetitions at 70% of 1RM and 2 repetitions at 90% of 1RM. Results indicated greater activation of the medial deltoid on the free weight bench press than on the Smith machine bench press. Also, there was greater muscle activation at the 90% 1RM load than at the 70% 1RM load. The results of this study suggest that strength coaches should consider choosing the free weight bench press over the Smith machine bench press because of its potential for greater upper-body muscular development.

  18. PERSEPSI MANFAAT DAN RISIKO DALAM PERILAKU PEMBELIAN KONSUMEN ONLINE SHOP

    Directory of Open Access Journals (Sweden)

    Lilik Noor Yuliati

    2011-08-01

    Full Text Available  This study was to analyze lifestyle, perceived risks, perceived benefits, online searching, evaluation of information, and consumer purchasing behavior in online shop. Online shop election conducted purposively, that was facebook, kaskus, and online shop community. The study included 145 consumers. Data analysis was performed by descriptive, different test, and regression test. The results showed that perceived risks, evaluation of information, and online shopping expenditure among groups that worked and didn’t work differ significantly. Consumers had lifestyle in moderate category, perceived risk in risk category, neutral perceived benefits, and low online searching. Perceived benefits was influenced by gender, age, occupation, income, and lifestyle, while the perceived risks was influenced by work and lifestyle. Online search influenced by gender, while evaluation of information was influenced by gender, perceived benefits, and perceived risks. Fashion product buying behavior was influenced by gender, age, occupation, lifestyle, perceived benefits, online searching, and evaluation of information.

  19. Open|SpeedShop Graphical User Interface Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to create a new graphical user interface (GUI) for an existing parallel application performance and profiling tool, Open|SpeedShop. The current GUI has...

  20. Teaching E-Commerce by Shopping Only Online.

    Science.gov (United States)

    Mangan, Catherine S.

    2000-01-01

    Describes the experiences of Bruce D. Weinberg, an assistant professor of marketing at Boston University (Massachusetts), who is doing all his shopping via the Internet to demonstrate to students what works and what fails when selling in cyberspace. (DB)

  1. Environmental Assessment. Moanalua Shopping Center Redevelopment Oahu, Hawaii

    National Research Council Canada - National Science Library

    Pingree, Ryan; Halperin, William

    2004-01-01

    The Department of the Navy has prepared an Environmental Assessment (EA) and determined that an Environmental Impact Statement is not required for the redevelopment of the Moanalua Shopping Center (MSC) Oahu Hawaii...

  2. Consumer's Online Shopping Influence Factors and Decision-Making Model

    Science.gov (United States)

    Yan, Xiangbin; Dai, Shiliang

    Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

  3. Apparel shopping behavior of elderly men and women.

    Science.gov (United States)

    Chowdhary, U

    1989-06-01

    70 interested elderly (65 yr. and over) men and women participated in an investigation of older consumers' apparel-shopping behavior and satisfactions and dissatisfactions with available clothing and facilities. Analysis showed that the participants considered shopping ease, wide variety, and label/brand as some of the important factors while shopping for clothes. The respondents were satisfied with good selection, closeness of the mall, and reasonable sales. However, their dissatisfactions ranged from service to fit and size, youthful styles, and abundance of imported clothing. In-store displays, mail order catalogs, and window shopping were the most commonly used sources of apparel information. Several implications of the findings were discussed and suggestions for further research were made.

  4. EFFECT OF V C NCY ON SHOPPING CENTRES' INVESTMENT ...

    African Journals Online (AJOL)

    USER

    2015-01-12

    Jan 12, 2015 ... The paper examined the effect of vacancy rate on the rental returns of shopping centres ... the risk of rents not increasing appreciably ... relationship between vacancy rates and rent ... costs, heterogeneity of the housing stock,.

  5. CERN Shop - Christmas Sale on 13 and 14 December

    CERN Multimedia

    2006-01-01

    Looking for Christmas present ideas? As every year, we will be running a CERN Shop Stand in the Main Building, ground floor, on Wednesday 13 and on Thursday 14 December from 10.30 to 16.00. Some new articles will be on sale and special reductions are given for some articles. Come and visit the CERN Shop Stand and find your Christmas presents. DSU-CO group

  6. Social Media, Online Shopping Activities and Perceived Risks in Malaysia

    OpenAIRE

    Majid, M.; Firend, A.R

    2017-01-01

    The Internet shopping experience offers dissimilar ways of off-online communications with communication differences tools that need a better decision of their effect on customer communications. Social networking sites is also fast becoming the platform for interaction, attracting new potential customers and has become the trend for companies to engage with their consumers online. The main objective of this research is to examine Malaysia customer’s risk perception toward online shopping via s...

  7. A Shopping Mall Multiagent System: Ambient Intelligence in Practice.

    OpenAIRE

    Bajo Pérez, Javier; González Arrieta, Angélica; de Luis Reboredo, Ana; Saavedra, A.; Corchado Rodríguez, Juan M.

    2006-01-01

    This paper presents a multiagent model that facilitates aspects of shopping mall management, as well as increasing the quality of leisure facilities and shopping on offer. The work presented focuses on the use of a multi agent architecture, based on the use of deliberative agents that incorporates casebased planning. The architecture considers a dynamic framework that facilitates user’s interactions. The architecture incorporates agents whose aim is to acquire knowledge and adapt themselves t...

  8. ShopGirls Shine in Eco-Marathon

    Science.gov (United States)

    Stowell, Shante

    2011-01-01

    The ShopGirls of Granite Falls (WA) High School are the first-ever all-female team to successfully design, build, and race a prototype diesel car in the Shell Eco-marathon. The team took first place in the diesel fuel-efficiency category with a vehicle that achieved 470 miles per gallon! The idea for the ShopGirls came when Vervia Gabriel, career…

  9. Customer satisfaction with individual shopping trip experiences in grocery retailing

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G; Jensen, Birger Boutrup

    , whereas hedonic value reflects the potential entertainment and emotional worth associated with the shopping trip. Recognising this duality, in addition to enabling customers to satisfy utilitarian needs related to product-acquisition, grocery retailers increasingly try to offer customers pleasurable...... shopping experiences, even to entertain them. Because there is evidence suggesting even satisfied customers sometimes switch brands and retailers due to boredom, it is important for retailers to continuously engage consumers and stir interest in a given store. Satisfying customers again and again...

  10. Visualization of the sequence of a couple splitting outside shop

    DEFF Research Database (Denmark)

    2015-01-01

    Visualization of tracks of couple walking together before splitting and one goes into shop the other waits outside. The visualization represents the sequence described in figure 7 in the publication 'Taking the temperature of pedestrian movement in public spaces'......Visualization of tracks of couple walking together before splitting and one goes into shop the other waits outside. The visualization represents the sequence described in figure 7 in the publication 'Taking the temperature of pedestrian movement in public spaces'...

  11. LinkShop v.1.0.0

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-15

    LinkShop is a software tool for applying the method of Linkography to the analysis time-sequence data. LinkShop provides command line, web, and application programming interfaces (API) for input and processing of time-sequence data, abstraction models, and ontologies. The software creates graph representations of the abstraction model, ontology, and derived linkograph. Finally, the tool allows the user to perform statistical measurements of the linkograph and refine the ontology through direct manipulation of the linkograph.

  12. The role of food shopping in later life.

    Science.gov (United States)

    Pettigrew, Simone; Worrall, Caitlin; Biagioni, Nicole; Talati, Zenobia; Jongenelis, Michelle

    2017-04-01

    By the time they reach retirement, individuals are typically highly experienced in sourcing food products and they have strong familiarity with food retailing environments. To investigate the ongoing role of food shopping in later life, the present study explored seniors' attitudes to food shopping and their food-selection behaviours through the lens of their broader lifestyles. The aim was to provide insights of relevance to the development of future efforts to optimise seniors' food shopping experiences and nutrition-related outcomes. Interviews were conducted with 75 Western Australians aged 60 + years to discuss food shopping in the context of their day-to-day lives. The sample was comprised mainly of women (n = 64) and the average age was 74 years. In general, food shopping was perceived to be a manageable but mundane part of life. The findings suggest that there has been an improvement in food retailing practices because many of the numerous areas of concern identified in previous research conducted in this geographical location a decade ago were not nominated as relevant by the interviewees. Instead, food-related issues reported to be most problematic included the difficulties associated with sourcing affordable food products that had been produced locally and that did not contain unacceptable food additives. Seniors' food shopping concerns thus appear to have changed from functional aspects of the physical store environment to product attributes that reflect the increasing industrialisation of the food industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Cue reactivity towards shopping cues in female participants.

    Science.gov (United States)

    Starcke, Katrin; Schlereth, Berenike; Domass, Debora; Schöler, Tobias; Brand, Matthias

    2013-03-01

    Background and aims It is currently under debate whether pathological buying can be considered as a behavioural addiction. Addictions have often been investigated with cue-reactivity paradigms to assess subjective, physiological and neural craving reactions. The current study aims at testing whether cue reactivity towards shopping cues is related to pathological buying tendencies. Methods A sample of 66 non-clinical female participants rated shopping related pictures concerning valence, arousal, and subjective craving. In a subgroup of 26 participants, electrodermal reactions towards those pictures were additionally assessed. Furthermore, all participants were screened concerning pathological buying tendencies and baseline craving for shopping. Results Results indicate a relationship between the subjective ratings of the shopping cues and pathological buying tendencies, even if baseline craving for shopping was controlled for. Electrodermal reactions were partly related to the subjective ratings of the cues. Conclusions Cue reactivity may be a potential correlate of pathological buying tendencies. Thus, pathological buying may be accompanied by craving reactions towards shopping cues. Results support the assumption that pathological buying can be considered as a behavioural addiction. From a methodological point of view, results support the view that the cue-reactivity paradigm is suited for the investigation of craving reactions in pathological buying and future studies should implement this paradigm in clinical samples.

  14. ARTIFICIAL INTELLIGENCE EFFECTIVENESS IN JOB SHOP ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    OMAR CASTRILLON

    2011-01-01

    Full Text Available El objetivo del presente trabajo, es definir una nueva metodología la cual permita comparar la efectividad de algunas de las principales técnicas de inteligencia artificial (aleatorias, búsqueda tabú, minería de datos, algoritmos evolutivos. Esta metodología es aplicada en los procesos de secuenciación de la producción en ambientes job shop, en un problema con N pedidos y M máquinas, donde cada uno de los pedidos debe pasar por todas las máquinas sin importar el orden. Estas técnicas son medidas en las variables tiempo total de proceso, tiempo total muerto y porcentaje de utilización de las máquinas. Inicialmente, una revisión teórica fue realizada, esta muestra la utilidad y efectividad de la inteligencia artificial en los procesos de secuenciación de la producción. Posteriormente y con base en la experimentación planteada, los resultados obtenidos, muestran que estas técnicas presentan una efectividad superior al 95%, con un intervalo de confiabilidad del 99.5% medido en las variables objeto de estudio.

  15. Assessing product image quality for online shopping

    Science.gov (United States)

    Goswami, Anjan; Chung, Sung H.; Chittar, Naren; Islam, Atiq

    2012-01-01

    Assessing product-image quality is important in the context of online shopping. A high quality image that conveys more information about a product can boost the buyer's confidence and can get more attention. However, the notion of image quality for product-images is not the same as that in other domains. The perception of quality of product-images depends not only on various photographic quality features but also on various high level features such as clarity of the foreground or goodness of the background etc. In this paper, we define a notion of product-image quality based on various such features. We conduct a crowd-sourced experiment to collect user judgments on thousands of eBay's images. We formulate a multi-class classification problem for modeling image quality by classifying images into good, fair and poor quality based on the guided perceptual notions from the judges. We also conduct experiments with regression using average crowd-sourced human judgments as target. We compute a pseudo-regression score with expected average of predicted classes and also compute a score from the regression technique. We design many experiments with various sampling and voting schemes with crowd-sourced data and construct various experimental image quality models. Most of our models have reasonable accuracies (greater or equal to 70%) on test data set. We observe that our computed image quality score has a high (0.66) rank correlation with average votes from the crowd sourced human judgments.

  16. Pengaruh Shopping Orientation, Online Trust Dan Prior Online Purchase Experience Terhadap Online Purchase Intention (Studi Pada Online Shop Hijabi House)

    OpenAIRE

    Azifah, Nurul; Dewi, Citra Kusuma

    2016-01-01

    Salah satu fashion yang semakin berkembang di kalangan masyarakat Indonesia khususnya wanita muslimah adalah jilbab. Hijabi House merupakan salah satu online shop yang menawarkan jilbab hasil produksinya melalui media sosial Instagram. Hasil wawancara awal, Hijabi House dinilai baik namun masih ada keluhan dari para followers berkaitan shopping orientation, online trust, dan prior online purchase experience. Penelitian yang bertujuan untuk mengetahui pengaruh ketiga variabel tersebut terhadap...

  17. A causal model to evaluate the influence of consumer's perceptions of online shopping on their shopping behavior

    OpenAIRE

    Asakawa, Masami; Okano, Masao

    2009-01-01

    This study examined the factors influencing consumers' perception of online shopping and developed a causal model that explains how this perception affects their online-shopping behavior. We administered a questionnaire survey to 297 college students. By utilizing the answers to 13 questions pertaining to consumer perceptions, we conducted a factor analysis that identified the following three factors: "convenience", "anxiety regarding security" and "poor navigation". On the basis of this resu...

  18. Design of a Test Bench for Intraocular Lens Optical Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Alba-Bueno, Francisco; Vega, Fidel; Millan, Maria S, E-mail: francisco.alba-bueno@upc.edu, E-mail: fvega@oo.upc.edu, E-mail: millan@oo.upc.edu [Departamento de Optica y Optometria, Universidad Politecnica de Cataluna, C/ Violinista Vellsola 37, 08222 Terrassa (Spain)

    2011-01-01

    The crystalline lens is the responsible for focusing at different distances (accommodation) in the human eye. This organ grows throughout life increasing in size and rigidity. Moreover, due this growth it loses transparency through life, and becomes gradually opacified causing what is known as cataracts. Cataract is the most common cause of visual loss in the world. At present, this visual loss is recoverable by surgery in which the opacified lens is destroyed (phacoemulsification) and replaced by the implantation of an intraocular lens (IOL). If the IOL implanted is mono-focal the patient loses its natural capacity of accommodation, and as a consequence they would depend on an external optic correction to focus at different distances. In order to avoid this dependency, multifocal IOLs designs have been developed. The multi-focality can be achieved by using either, a refractive surface with different radii of curvature (refractive IOLs) or incorporating a diffractive surface (diffractive IOLs). To analyze the optical quality of IOLs it is necessary to test them in an optical bench that agrees with the ISO119679-2 1999 standard (Ophthalmic implants. Intraocular lenses. Part 2. Optical Properties and Test Methods). In addition to analyze the IOLs according to the ISO standard, we have designed an optical bench that allows us to simulate the conditions of a real human eye. To do that, we will use artificial corneas with different amounts of optical aberrations and several illumination sources with different spectral distributions. Moreover, the design of the test bench includes the possibility of testing the IOLs under off-axis conditions as well as in the presence of decentration and/or tilt. Finally, the optical imaging quality of the IOLs is assessed by using common metrics like the Modulation Transfer Function (MTF), the Point Spread Function (PSF) and/or the Strehl ratio (SR), or via registration of the IOL's wavefront with a Hartmann-Shack sensor and its

  19. Design guidelines for high dimensional stability of CFRP optical bench

    Science.gov (United States)

    Desnoyers, Nichola; Boucher, Marc-André; Goyette, Philippe

    2013-09-01

    In carbon fiber reinforced plastic (CFRP) optomechanical structures, particularly when embodying reflective optics, angular stability is critical. Angular stability or warping stability is greatly affected by moisture absorption and thermal gradients. Unfortunately, it is impossible to achieve the perfect laminate and there will always be manufacturing errors in trying to reach a quasi-iso laminate. Some errors, such as those related to the angular position of each ply and the facesheet parallelism (for a bench) can be easily monitored in order to control the stability more adequately. This paper presents warping experiments and finite-element analyses (FEA) obtained from typical optomechanical sandwich structures. Experiments were done using a thermal vacuum chamber to cycle the structures from -40°C to 50°C. Moisture desorption tests were also performed for a number of specific configurations. The selected composite material for the study is the unidirectional prepreg from Tencate M55J/TC410. M55J is a high modulus fiber and TC410 is a new-generation cyanate ester designed for dimensionally stable optical benches. In the studied cases, the main contributors were found to be: the ply angular errors, laminate in-plane parallelism (between 0° ply direction of both facesheets), fiber volume fraction tolerance and joints. Final results show that some tested configurations demonstrated good warping stability. FEA and measurements are in good agreement despite the fact that some defects or fabrication errors remain unpredictable. Design guidelines to maximize the warping stability by taking into account the main dimensional stability contributors, the bench geometry and the optical mount interface are then proposed.

  20. Quality Assessment of Vertical Angular Deviations for Photometer Calibration Benches

    International Nuclear Information System (INIS)

    Ribeiro, A Silva; Santos, A Costa; E Sousa, J Alves; Forbes, A B

    2015-01-01

    Lighting, both natural and electric, constitutes one of the most important aspects of the life of human beings, allowing us to see and perform our daily tasks in outdoor and indoor environments. The safety aspects of lighting are self-evident in areas such as road lighting, urban lighting and also indoor lighting. The use of photometers to measure lighting levels requires traceability obtained in accredited laboratories, which must provide an associated uncertainty. It is therefore relevant to study the impact of known uncertainty sources like the vertical angular deviation of photometer calibration benches, in order to define criteria to its quality assessment

  1. Dynamic balance abilities of collegiate men for the bench press.

    Science.gov (United States)

    Piper, Timothy J; Radlo, Steven J; Smith, Thomas J; Woodward, Ryan W

    2012-12-01

    This study investigated the dynamic balance detection ability of college men for the bench press exercise. Thirty-five college men (mean ± SD: age = 22.4 ± 2.76 years, bench press experience = 8.3 ± 2.79 years, and estimated 1RM = 120.1 ± 21.8 kg) completed 1 repetition of the bench press repetitions for each of 3 bar loading arrangements. In a randomized fashion, subjects performed the bench press with a 20-kg barbell loaded with one of the following: a balanced load, one 20-kg plate on each side; an imbalanced asymmetrical load, one 20-kg plate on one side and a 20-kg plate plus a 1.25-kg plate on the other side; or an imbalanced asymmetrical center of mass, 20-kg plate on one side and sixteen 1.25-kg plates on the other side. Subjects were blindfolded and wore ear protection throughout all testing to decrease the ability to otherwise detect loads. Binomial data analysis indicated that subjects correctly detected the imbalance of the imbalanced asymmetrical center of mass condition (p[correct detection] = 0.89, p < 0.01) but did not correctly detect the balanced condition (p[correct detection] = 0.46, p = 0.74) or the imbalanced asymmetrical condition (p[correct detection] = 0.60, p = 0.31). Although it appears that a substantial shift in the center of mass of plates leads to the detection of barbell imbalance, minor changes of the addition of 1.25 kg (2.5 lb) to the asymmetrical condition did not result in consistent detection. Our data indicate that the establishment of a biofeedback loop capable of determining balance detection was only realized under a high degree of imbalance. Although balance detection was not present in either the even or the slightly uneven loading condition, the inclusion of balance training for upper body may be futile if exercises are unable to establish such a feedback loop and thus eliciting an improvement of balance performance.

  2. STS-65 crewmembers participate in bench review at Boeing Building

    Science.gov (United States)

    1994-01-01

    Attired in clean suits, STS-65 Payload Commander (PLC) Richard J. Hieb (left) and Payload Specialist Chiaki Mukai examine the contents of a stowage locker during a bench review at Boeing's Flight Equipment Processing Facility (FEPF) near the Johnson Space Center (JSC). In the background, Commander Robert D. Cabana inspects additional equipment to be carried aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, for the scheduled July flight of the second International Microgravity Laboratory (IML-2) mission. Mukai represents Japan's National Space Development Agency (NASDA). Photo taken by NASA JSC contract photographer Scott A. Wickes.

  3. Comparative tests of bench equipment for fuel control system testing of gas-turbine engine

    Science.gov (United States)

    Shendaleva, E. V.

    2018-04-01

    The relevance of interlaboratory comparative researches is confirmed by attention of world metrological community to this field of activity. Use of the interlaboratory comparative research methodology not only for single gages collation, but also for bench equipment complexes, such as modeling stands for fuel control system testing of gas-turbine engine, is offered. In this case a comparative measure of different bench equipment will be the control fuel pump. Ensuring traceability of measuring result received at test benches of various air enterprises, development and introduction of national standards to practice of bench tests and, eventually, improvement of quality and safety of a aircraft equipment is result of this approach.

  4. Bench-marking beam-beam simulations using coherent quadrupole effects

    International Nuclear Information System (INIS)

    Krishnagopal, S.; Chin, Y.H.

    1992-06-01

    Computer simulations are used extensively in the study of the beam-beam interaction. The proliferation of such codes raises the important question of their reliability, and motivates the development of a dependable set of bench-marks. We argue that rather than detailed quantitative comparisons, the ability of different codes to predict the same qualitative physics should be used as a criterion for such bench-marks. We use the striking phenomenon of coherent quadrupole oscillations as one such bench-mark, and demonstrate that our codes do indeed observe this behaviour. We also suggest some other tests that could be used as bench-marks

  5. Bench-marking beam-beam simulations using coherent quadrupole effects

    International Nuclear Information System (INIS)

    Krishnagopal, S.; Chin, Y.H.

    1992-01-01

    Computer simulations are used extensively in the study of the beam-beam interaction. The proliferation of such codes raises the important question of their reliability, and motivates the development of a dependable set of bench-marks. We argue that rather than detailed quantitative comparisons, the ability of different codes to predict the same qualitative physics should be used as a criterion for such bench-marks. We use the striking phenomenon of coherent quadrupole oscillations as one such bench-mark, and demonstrate that our codes do indeed observe this behavior. We also suggest some other tests that could be used as bench-marks

  6. [Twisting and turning; the development of the Dutch science shops].

    Science.gov (United States)

    Lursen, M; Mulder, H; Lieshout, M

    2000-01-01

    The concept of science shops (Wetenschapswinkels) originates from the Netherlands. Science shops were based on the idea that universities had to play a more prominent role in the solution of social problems - an outcome of the discussion, initiated by students, on the democratisation of universities in the early 1970s. Starting as voluntary student organisations supported by individual staff members from the universities, they were devoted to give oppressed minority groups and the financially weak access to scientific research. Slowly, acknowledgement came. Science shops began to receive financial support from university boards. Support also came from the Dutch government. By now science shops have professionalized and most of them are well embedded in their universities. Many developments within society and the universities influenced the work and structure of the science shops. Positive developments were professionalization, growth, becoming embedded, and the introduction of new research themes. There were also negative developments, such as budget cuts and the fact that 'service to society' ceased to be a government objective for the universities. These led to recurring struggles for survival, which were not always won. Interest in the science shop concept has grown in other countries over the last years. In the 1980s, the system spread within Western Europe. Similar activities, based on the Dutch model, have started in North America and Eastern Europe in the 1990s. The activities on the international level led to an E.U. financial project to prepare an international network of science shops, which commenced in 1999. With information exchange and international cooperation as its major goals, the network will create new opportunties for the future.

  7. Bench-scale magnetic separation of Department of Energy wastes

    International Nuclear Information System (INIS)

    Hoegler, J.M.

    1987-07-01

    Criteria were developed for selection of candidate wastes for testing magnetic separation of uranium and/or other paramagnetic materials. A survey of Department of Energy (DOE) hazardous wastes was conducted to determine good candidates for bench-scale magnetic separation tests. Representatives of 21 DOE sites were contacted, and 11 materials were identified as potential candidates for magnetic separation. To date, seven samples have been obtained and tested for separability of uranium with a bench-scale magnetic assaying device. The samples tested have been obtained from the K-1401B and K-1401C ponds in Oak Ridge, Tennessee; from waste piles in Maywood, New Jersey; from North and South Ponds in Richland, Washington; and from magnesium fluoride drums in Fernald, Ohio. The magnetic device utilized in these tests can be used in an open-gradient mode with dry particulate or liquid-suspended materials. Uranium separation from magnesium fluoride has shown exceptionally good performance in both open- and high-gradient modes and could be an important application of the technology

  8. Research on Test-bench for Sonic Logging Tool

    Directory of Open Access Journals (Sweden)

    Xianping Liu

    2016-01-01

    Full Text Available In this paper, the test-bench for sonic logging tool is proposed and designed to realize automatic calibration and testing of the sonic logging tool. The test-bench System consists of Host Computer, Embedded Controlling Board, and functional boards. The Host Computer serves as the Human Machine Interface (HMI and processes uploaded data. The software running on Host Computer is designed on VC++, which is developed based on multithreading, Dynamic Linkable Library (DLL and Multiple Document Interface (MDI techniques. The Embedded Controlling Board uses ARM7 as the microcontroller and communicates with Host Computer via Ethernet. The Embedded Controlling Board software is realized based on embedded uclinux operating system with a layered architecture. The functional boards are designed based on Field Programmable Gate Array (FPGA and provide test interfaces for the logging tool. The functional board software is divided into independent sub-modules that can repeatedly be used by various functional boards and then integrated those sub-modules in the top layer. With the layered architecture and modularized design, the software system is highly reliable and extensible. With the help of designed system, a test has been conducted quickly and successfully on the electronic receiving cabin of the sonic logging tool. It demonstrated that the system could greatly improve the production efficiency of the sonic logging tool.

  9. Streamflow characteristics at hydrologic bench-mark stations

    Science.gov (United States)

    Lawrence, C.L.

    1987-01-01

    The Hydrologic Bench-Mark Network was established in the 1960's. Its objectives were to document the hydrologic characteristics of representative undeveloped watersheds nationwide and to provide a comparative base for studying the effects of man on the hydrologic environment. The network, which consists of 57 streamflow gaging stations and one lake-stage station in 39 States, is planned for permanent operation. This interim report describes streamflow characteristics at each bench-mark site and identifies time trends in annual streamflow that have occurred during the data-collection period. The streamflow characteristics presented for each streamflow station are (1) flood and low-flow frequencies, (2) flow duration, (3) annual mean flow, and (4) the serial correlation coefficient for annual mean discharge. In addition, Kendall's tau is computed as an indicator of time trend in annual discharges. The period of record for most stations was 13 to 17 years, although several stations had longer periods of record. The longest period was 65 years for Merced River near Yosemite, Calif. Records of flow at 6 of 57 streamflow sites in the network showed a statistically significant change in annual mean discharge over the period of record, based on computations of Kendall's tau. The values of Kendall's tau ranged from -0.533 to 0.648. An examination of climatological records showed that changes in precipitation were most likely the cause for the change in annual mean discharge.

  10. Effects of different vibration exercises on bench press.

    Science.gov (United States)

    Marín, P J; Torres-Luque, G; Hernández-García, R; García-López, D; Garatachea, N

    2011-10-01

    This study was undertaken to analyze the effects of different vibration recovery strategies via feet or hands on the number of repetitions performed and on mean velocity, peak velocity and blood lactate concentration during consecutive bench-press sets. 9 elite judo athletes performed 3 sets of bench press at 60% of one-repetition maximum (1RM), leading to failure and allowing a 180 s rest period between sets. During the rest period, 1 of the 3 following procedures was performed: 150 s rest plus 30 s push-up vibration exercise (Push-up), 150 s rest plus 30 s squat vibration exercise (Squat) or 180 s only rest (Passive). Statistical analysis revealed that the Squat condition resulted in a significant increase in the number of repetitions achieved, in comparison with all other rest strategies. However, kinematic parameters and blood lactate concentration were not affected by vibration. These data suggest that a vibration stimulus applied to the feet, between sets, can result in positive improvements in upper body resistance exercise performance. Although the mechanisms are not fully understood, this positive effect of vibration could be due to an increased motor cortex excitability and voluntary drive. © Georg Thieme Verlag KG Stuttgart · New York.

  11. Muscle synergies during bench press are reliable across days.

    Science.gov (United States)

    Kristiansen, Mathias; Samani, Afshin; Madeleine, Pascal; Hansen, Ernst Albin

    2016-10-01

    Muscle synergies have been investigated during different types of human movement using nonnegative matrix factorization. However, there are not any reports available on the reliability of the method. To evaluate between-day reliability, 21 subjects performed bench press, in two test sessions separated by approximately 7days. The movement consisted of 3 sets of 8 repetitions at 60% of the three repetition maximum in bench press. Muscle synergies were extracted from electromyography data of 13 muscles, using nonnegative matrix factorization. To evaluate between-day reliability, we performed a cross-correlation analysis and a cross-validation analysis, in which the synergy components extracted in the first test session were recomputed, using the fixed synergy components from the second test session. Two muscle synergies accounted for >90% of the total variance, and reflected the concentric and eccentric phase, respectively. The cross-correlation values were strong to very strong (r-values between 0.58 and 0.89), while the cross-validation values ranged from substantial to almost perfect (ICC3, 1 values between 0.70 and 0.95). The present findings revealed that the same general structure of the muscle synergies was present across days and the extraction of muscle synergies is thus deemed reliable. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Innovative lightweight substrate for stable optical benches and mirrors

    Science.gov (United States)

    Rugi Grond, E.; Herren, A.; Mérillat, S.; Fermé, J. J.

    2017-11-01

    High precision space optics, such as spectrometers, relay optics, and filters, require ultra stable, lightweight platforms. These equipped platforms have on one side to survive the launch loads, on the other side they have to maintain their stability also under the varying thermal loads occurring in space. Typically such platforms have their equipment (prisms, etalons, beam expanders, etc.) mounted by means of classical bonding, hydro-catalytic bonding or optical contacting. Therefore such an optical bench requires to provide an excellent flatness, minimal roughness and is usually made of the same material as the equipment it carries (glass, glass ceramics). For space systems, mass is a big penalty, therefore such optical platforms are in most cases light weighted by means of machining features (i.e. pockets). Besides of being not extremely mass efficient, such pockets reduce the load carrying capability of the base material significantly. The challenge for Oerlikon Space, in this context, was to develop, qualify and deliver such optical benches, providing a substantial mass reduction compared to actual light weighted systems, while maintaining most of the full load carrying capacity of the base material. Additionally such a substrate can find an attractive application for mirror substrates. The results of the first development and of the first test results will be presented.

  13. Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors

    Science.gov (United States)

    ROSE, SUSAN; DHANDAYUDHAM, ARUN

    2014-01-01

    Background: Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. Method: The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science – Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. Results: The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Conclusions: Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA. PMID:25215218

  14. Patients' views on price shopping and price transparency.

    Science.gov (United States)

    Semigran, Hannah L; Gourevitch, Rebecca; Sinaiko, Anna D; Cowling, David; Mehrotra, Ateev

    2017-06-01

    Driven by the growth of high deductibles and price transparency initiatives, patients are being encouraged to search for prices before seeking care, yet few do so. To understand why this is the case, we interviewed individuals who were offered access to a widely used price transparency website through their employer. Qualitative interviews. We interviewed individuals enrolled in a preferred provider organization product through their health plan about their experience using the price transparency tool (if they had done so), their past medical experiences, and their opinions on shopping for care. All interviews were transcribed and manually coded using a thematic coding guide. In general, respondents expressed frustration with healthcare costs and had a positive opinion of the idea of price shopping in theory, but 2 sets of barriers limited their ability to do so in reality. The first was the salience of searching for price information. For example, respondents recognized that due to their health plan benefits design, they would not save money by switching to a lower-cost provider. Second, other factors were more important than price for respondents when choosing a provider, including quality and loyalty to current providers. We found a disconnect between respondents' enthusiasm for price shopping and their reported use of a price transparency tool to shop for care. However, many did find the tool useful for other purposes, including checking their claims history. Addressing the barriers to price shopping identified by respondents can help inform ongoing and future price transparency initiatives.

  15. Meat Safety: An Evaluation of Portuguese Butcher Shops.

    Science.gov (United States)

    Santos, Ana; Cardoso, Margarida Fonseca; Costa, José M Correia da; Gomes-Neves, Eduarda

    2017-07-01

    Butcher shops are end points in the meat chain, and they can have a determinant role in cross-contamination control. This study aims to determine whether Portuguese butcher shops comply with European and Portuguese law regarding the sale of fresh meat and meat products. Butcher shops (n = 73) were assessed for meat handler and facility hygiene and for maintenance of the premises. Handlers (n = 88) were given a questionnaire composed of questions about knowledge and practice, including hazard analysis and critical control point (HACCP) and good practice in food industry, to assess their knowledge of and compliance with food safety practices. A checklist of 27 items was used to evaluate facility and meat handler hygiene and butcher shop maintenance. Our results revealed some lack of compliance in all the areas evaluated. The mean knowledge and practice score among the operators was 68.0%, and the mean "visual inspection" score for the butcher shops was 64.0%. Severe deficiencies were observed in the mandatory implementation of HACCP principles in this type of small food business. These findings indicate a need to modify training to enhance compliance with European food safety regulations at this step of the meat chain.

  16. Shopping versus Nature? An Exploratory Study of Everyday Experiences.

    Science.gov (United States)

    Craig, Tony P; Fischer, Anke; Lorenzo-Arribas, Altea

    2018-01-01

    Although a growing volume of empirical research shows that being in nature is important for human wellbeing, the definition of what constitutes an 'experience in nature,' and how this is different from other types of experiences, is very often left implied. In this paper we contrast everyday experiences involving nature with a category of everyday experience in which most people regularly partake. We present an exploratory study in which people ( N = 357) were explicitly asked to describe a memory they had of an everyday 'experience which involved nature,' as well as an everyday 'experience which involved shopping.' The open-ended responses to these questions were analyzed both quantitatively and qualitatively. Nature experiences were generally found to be more positive than shopping experiences, and they were more likely to be rated as 'peaceful' and 'active' compared to shopping experiences. Follow-up analyses indicate a significant interaction between experience category (nature or shopping), and the relationship between connectedness to nature and the amount of pleasure associated with that experience: The more strongly connected to nature a respondent was, the larger the disparity between the pleasantness of the shopping experience and that of the experience in nature tended to be.

  17. Shopping versus Nature? An Exploratory Study of Everyday Experiences

    Directory of Open Access Journals (Sweden)

    Tony P. Craig

    2018-01-01

    Full Text Available Although a growing volume of empirical research shows that being in nature is important for human wellbeing, the definition of what constitutes an ‘experience in nature,’ and how this is different from other types of experiences, is very often left implied. In this paper we contrast everyday experiences involving nature with a category of everyday experience in which most people regularly partake. We present an exploratory study in which people (N = 357 were explicitly asked to describe a memory they had of an everyday ‘experience which involved nature,’ as well as an everyday ‘experience which involved shopping.’ The open-ended responses to these questions were analyzed both quantitatively and qualitatively. Nature experiences were generally found to be more positive than shopping experiences, and they were more likely to be rated as ‘peaceful’ and ‘active’ compared to shopping experiences. Follow-up analyses indicate a significant interaction between experience category (nature or shopping, and the relationship between connectedness to nature and the amount of pleasure associated with that experience: The more strongly connected to nature a respondent was, the larger the disparity between the pleasantness of the shopping experience and that of the experience in nature tended to be.

  18. An Empirical Study Of Using New Technology like NFC, AI, RFID etc. to be implemented in shopping malls in ajmer : To Ease Out The Customer Shopping Experience Like Queue Less And Cashless Payment Mode

    OpenAIRE

    Dimple,; Jyoti Kushwah; Manisha Tak; Neeharika singh; Dr. Ajay Singh Jethoo; Vijay Laxmi Kalyani

    2017-01-01

    In today’s world due to rapid development of new shopping trend. The retailers launches new technologies for new shopping trend. In today scenario every people are busy. When we are talking about shopping from stores, shopping malls etc., the customers waiting in queue for long time for payment process. This is a problematic conditions for customers. The traditional shopping trend consuming more time of customers during shopping. To remove this problem many retailers are focussing that how to...

  19. CONCEPTUAL MODEL OF CONSUMERS TRUST TO ONLINE SHOPS

    Directory of Open Access Journals (Sweden)

    T. Dubovyk

    2014-06-01

    Full Text Available In the article the conceptual model of the major factors that influence consumers trust in online shop: reliability of online store, reliable information system for making purchases online, factors of ethic interactiveness (security, third-party certification, internet-marketing communications of online-shop and other factors – that is divided enterprises of trade and consumers (demographic variables, psychological perception of internet-marketing communications, experience of purchase of commodities are in the Internet. The degree of individual customer trust propensity which reflects the personality traits, culture and previous experience. An implement signs of consumer confidence due to site elements online shop – graphic design, structured design, design of content, design harmonized with perception of target audience.

  20. Smuggling and cross border shopping of tobacco in Europe.

    Science.gov (United States)

    Joossens, L; Raw, M

    1995-05-27

    Governments have recently become concerned about cross border shopping and smuggling because it can decrease tax revenue. The tobacco industry predicted that, with the removal of border controls in the European Union, price differences between neighbouring countries would lead to a diversion of tobacco trade, legally and illegally, to countries with cheaper cigarettes. According to them this diversion would be through increased cross border shopping for personal consumption or through increased smuggling of cheap cigarettes from countries with low tax to countries with high tax, where cigarettes are more expensive. These arguments have been used to urge governments not to increase tax on tobacco products. The evidence suggests, however, that cross border shopping is not yet a problem in Europe and that smuggling is not of cheap cigarettes to expensive countries. Instead, more expensive "international" brands are smuggled into northern Europe and sold illegally on the streets of the cheaper countries of southern Europe.

  1. Consumer Preferences Expressed via Shopping in Alternative Food Chains

    Directory of Open Access Journals (Sweden)

    Simona Miškolci

    2017-01-01

    Full Text Available In recent years an increasing consumer interest in shopping in alternative food chains can be observed also in the Czech Republic. For the successful development of alternative food networks, it is important to understand what motivates consumers to shop there. This paper is aimed to define and discuss the key aspects of the preference determinants of AFN shoppers. The empirical analysis was conducted on 333 shoppers at two alternative food chains in Brno, Czech Republic. The consumer survey was designed to examine cognitive, normative and affective determinants of preference for purchased food. First findings confirm, that by the shopping at alternative food chains consumers demonstrate preferences not only for fresh and tasty food, but also their normative position of willingness to support local production and community.

  2. The ultrasonic shop map and its use in preservice inspection

    International Nuclear Information System (INIS)

    Caplan, J.S.

    1975-01-01

    Prior to the introduction of Section X1 of the ASME Code on Inservice Inspection, a plan was introduced by Westinghouse to perform ultrasonic examinations of areas of high stress and high fluence of reactor pressure vessels in the manufacturer's shop and subsequent to the shop hydrostatic test. The tests provided a shop reference map of ultrasonic responses to use in subsequent preservice and inservice inspections, and attempted to locate any ultrasonic reflections beyond the acceptance standards of ASME Section III and, later, of Section X1. The history of the program is reviewed. Thirty-six vessels were examined during 1970 to 1973. As a result of indications discovered during ultrasonic examination repairs were carried out on five of these. Details are given of inspections and repairs. A summary is also given of the indications detected and of the correlations between the ultrasonic evaluation and actual flow characteristics. (U.K.)

  3. Interaction between NGOs and science through science shops

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    and institutions have more resources themselves and easier access to and influence on the research facilities than NGO’s like consumer organisations, environmental organisations, trade unions, social organisations etc. Science shops are organisations that offer NGO’s free or very low-cost access to scientific...... knowledge and research in order to help them achieve social and environmental improvement. Originally developed at Dutch universities during the 1970’s, science shops now also exist in Austria, Denmark, Germany, Romania and the U.K., as well as in a number of non-European countries including Australia......, Canada, Malaysia, South Korea and the USA. Some science shops are independent not-for-profit research centres and some are affiliated to a university acting as the intermediary between NGO’s and university researchers, teachers and students, who conduct research in response. Most university based science...

  4. Relationships among Shopping Quality and Corporate Social Responsibility of Shopping Centers and Consumer Satisfaction: Case from Novi Sad (Serbia

    Directory of Open Access Journals (Sweden)

    Ivana Blešić

    2014-02-01

    Full Text Available Taking into consideration satisfied customer as necessary for business maintenance, companies are trying to discover determinants which have the biggest influence on their consumer satisfaction. Here are presented two factors that have influence on consumer satisfaction in shopping centers: quality of shopping and corporate social responsibility. In this research, each of these factors had six elements. The results of the regression analysis are that “Value for money in stores” (beta=0.387, p=0.000 has the greatest impact on satisfaction when shopping quality performance is concerned, and that “Retailer support for (national/local cultural and sport events“ (beta=0.333, p<0.001 has the greatest impact on satisfaction in the case of CSR performance. Further analysis showed the difference in consumer perception of corporate social responsibility, depending on their occupation and level of education. It is also important to mention that consumers with environment and empathic concern have higher scores perception of CSR. However, there is not statistically important difference in consumer perception of shopping quality in shopping centers

  5. Principles of developing the bench mark net for radioecological monitoring in the territory of Byelorussia

    International Nuclear Information System (INIS)

    Doroshkevich, M.N.

    1991-01-01

    The principles of developing the radioecological monitoring bench mark net proposed include the regularity pattern of reference point setting, the bench mark net hierarchy, accounting for a land-tenure structure and the landscape and geochemical conditions of the radionuclide migration as well as a passport system and informational adequacy. The expression has been obtained for determining the location of sampling points

  6. Association Between Maximal Bench Press Strength and Isometric Handgrip Strength Among Breast Cancer Survivors.

    Science.gov (United States)

    Rogers, Benjamin H; Brown, Justin C; Gater, David R; Schmitz, Kathryn H

    2017-02-01

    To characterize the relationship between 1-repetition maximum (1-RM) bench press strength and isometric handgrip strength among breast cancer survivors. Cross-sectional study. Laboratory. Community-dwelling breast cancer survivors (N=295). Not applicable. 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer, with 3 maximal contractions of the left and right hands. All measures were conducted by staff with training in clinical exercise testing. Among 295 breast cancer survivors, 1-RM bench press strength was 18.2±6.1kg (range, 2.2-43.0kg), and isometric handgrip strength was 23.5±5.8kg (range, 9.0-43.0kg). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7kg (95% limits of agreement, -8.2 to 17.6kg). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=.31; Pstrength (R 2 =.23). Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among breast cancer survivors. 1-RM bench press strength and isometric handgrip strength quantify distinct components of muscular strength. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  7. Recreation Sports to host Sixth Annual Bench Press Competition March 17

    OpenAIRE

    Kropff, Catherine L.

    2007-01-01

    Music will blare, red and white lights will flash, and fans will cheer at the Sixth Annual Bench Press Competition to be held Saturday, March 17 at Virginia Tech. Participants will go to the bench to show their lifting skills beginning at 10 a.m. in War Memorial Gym.

  8. [A man with a painful upper arm after bench press exercise].

    Science.gov (United States)

    Sijtsma, Ben C T; van der Veen, Hugo C; van Raay, Jos J A M

    2015-01-01

    A 22-year-old male bodybuilder presented with pain and a haematoma of his right upper arm after bench press exercises. Suspicion of a pectoralis muscle tear was confirmed by MRI and surgical repair was performed. Ruptures of the pectoralis major muscle are rare, but may occur in young male bodybuilders, typically after bench press exercises.

  9. Street Choice Logit Model for Visitors in Shopping Districts

    Directory of Open Access Journals (Sweden)

    Ko Kawada

    2014-07-01

    Full Text Available In this study, we propose two models for predicting people’s activity. The first model is the pedestrian distribution prediction (or postdiction model by multiple regression analysis using space syntax indices of urban fabric and people distribution data obtained from a field survey. The second model is a street choice model for visitors using multinomial logit model. We performed a questionnaire survey on the field to investigate the strolling routes of 46 visitors and obtained a total of 1211 street choices in their routes. We proposed a utility function, sum of weighted space syntax indices, and other indices, and estimated the parameters for weights on the basis of maximum likelihood. These models consider both street networks, distance from destination, direction of the street choice and other spatial compositions (numbers of pedestrians, cars, shops, and elevation. The first model explains the characteristics of the street where many people tend to walk or stay. The second model explains the mechanism underlying the street choice of visitors and clarifies the differences in the weights of street choice parameters among the various attributes, such as gender, existence of destinations, number of people, etc. For all the attributes considered, the influences of DISTANCE and DIRECTION are strong. On the other hand, the influences of Int.V, SHOPS, CARS, ELEVATION, and WIDTH are different for each attribute. People with defined destinations tend to choose streets that “have more shops, and are wider and lower”. In contrast, people with undefined destinations tend to choose streets of high Int.V. The choice of males is affected by Int.V, SHOPS, WIDTH (positive and CARS (negative. Females prefer streets that have many shops, and couples tend to choose downhill streets. The behavior of individual persons is affected by all variables. The behavior of people visiting in groups is affected by SHOP and WIDTH (positive.

  10. Street Choice Logit Model for Visitors in Shopping Districts

    Science.gov (United States)

    Kawada, Ko; Yamada, Takashi; Kishimoto, Tatsuya

    2014-01-01

    In this study, we propose two models for predicting people’s activity. The first model is the pedestrian distribution prediction (or postdiction) model by multiple regression analysis using space syntax indices of urban fabric and people distribution data obtained from a field survey. The second model is a street choice model for visitors using multinomial logit model. We performed a questionnaire survey on the field to investigate the strolling routes of 46 visitors and obtained a total of 1211 street choices in their routes. We proposed a utility function, sum of weighted space syntax indices, and other indices, and estimated the parameters for weights on the basis of maximum likelihood. These models consider both street networks, distance from destination, direction of the street choice and other spatial compositions (numbers of pedestrians, cars, shops, and elevation). The first model explains the characteristics of the street where many people tend to walk or stay. The second model explains the mechanism underlying the street choice of visitors and clarifies the differences in the weights of street choice parameters among the various attributes, such as gender, existence of destinations, number of people, etc. For all the attributes considered, the influences of DISTANCE and DIRECTION are strong. On the other hand, the influences of Int.V, SHOPS, CARS, ELEVATION, and WIDTH are different for each attribute. People with defined destinations tend to choose streets that “have more shops, and are wider and lower”. In contrast, people with undefined destinations tend to choose streets of high Int.V. The choice of males is affected by Int.V, SHOPS, WIDTH (positive) and CARS (negative). Females prefer streets that have many shops, and couples tend to choose downhill streets. The behavior of individual persons is affected by all variables. The behavior of people visiting in groups is affected by SHOP and WIDTH (positive). PMID:25379274

  11. Indoor air quality at nine shopping malls in Hong Kong.

    Science.gov (United States)

    Li, W M; Lee, S C; Chan, L Y

    2001-06-12

    Hong Kong is one of the most attractive shopping paradises in the world. Many local people and international tourists favor to spend their time in shopping malls in Hong Kong. Good indoor air quality is, therefore, very essential to shoppers. In order to characterize the indoor air quality in shopping malls, nine shopping malls in Hong Kong were selected for this study. The indoor air pollutants included carbon dioxide (CO2), carbon monoxide (CO), total hydrocarbons (THC), formaldehyde (HCHO), respirable particulate matter (PM10) and total bacteria count (TBC). More than 40% of the shopping malls had 1-h average CO2 levels above the 1000 ppm of the ASHRAE standard on both weekdays and weekends. Also, they had average weekday PM10 concentrations that exceeded the Hong Kong Indoor Air Quality Objective (HKIAQO). The highest indoor PM10 level at a mall was 380 microg/m3. Of the malls surveyed, 30% had indoor airborne bacteria levels above 1000 cfu/m3 set by the HKIAQO. The elevated indoor CO2 and bacteria levels could result from high occupancy combined with insufficient ventilation. The increased PM10 levels could be probably attributed to illegal smoking inside these establishments. In comparison, the shopping malls that contained internal public transport drop-off areas, where vehicles were parked with idling engines and had major entry doors close to heavy traffic roads had higher CO and PM10 indoor levels. In addition, the extensive use of cooking stoves without adequate ventilation inside food courts could increase indoor CO2, CO and PM10 levels.

  12. A test-bench for measurement of electrical static parameters of strip silicon detectors

    International Nuclear Information System (INIS)

    Golutvin, I.A.; Dmitriev, A.Yu.; Elsha, V.V.

    2003-01-01

    An automated test-bench for electrical parameters input control of the strip silicon detectors, used in the End-Cap Preshower detector of the CMS experiment, is described. The test-bench application allows one to solve a problem of silicon detectors input control in conditions of mass production - 1800 detectors over 2 years. The test-bench software is realized in Delphi environment and contains a user-friendly operator interface for data processing and visualization as well as up-to-date facilities for MS-Windows used for the network database. High operating characteristics and reliability of the test-bench were confirmed while more than 800 detectors were tested. Some technical solutions applied to the test-bench could be useful for design and construction of automated facilities for electrical parameters measurements of the microstrip detectors input control. (author)

  13. A Test-Bench for Measurement of Electrical Static Parameters of Strip Silicon Detectors

    CERN Document Server

    Golutvin, I A; Danilevich, V G; Dmitriev, A Yu; Elsha, V V; Zamiatin, Y I; Zubarev, E V; Ziaziulia, F E; Kozus, V I; Lomako, V M; Stepankov, D V; Khomich, A P; Shumeiko, N M; Cheremuhin, A E

    2003-01-01

    An automated test-bench for electrical parameters input control of the strip silicon detectors, used in the End-Cap Preshower detector of the CMS experiment, is described. The test-bench application allows one to solve a problem of silicon detectors input control in conditions of mass production - 1800 detectors over 2 years. The test-bench software is realized in Delphi environment and contains a user-friendly operator interface for measurement data processing and visualization as well as up-to-date facilities for MS-Windows used for the network database. High operating characteristics and reliability of the test-bench were confirmed while more than 800 detectors were tested. Some technical solutions applied to the test-bench could be useful for design and construction of automated facilities for electrical parameters measurements of the microstrip detectors input control.

  14. CERN Shop - Christmas Sale on 15 and 16 December 2005

    CERN Multimedia

    DSU-CO Group

    2005-01-01

    Looking for Christmas present ideas? As every year, we will be running a CERN Shop Stand in the Main Building, ground floor, on Thursday 15 and on Friday 16 December from 10.30 to 16.00. Some new articles will be on sale and special reductions are given for articles such as 50th Anniversary T-shirts (15,-), all silk ties (30,-) and 50th Anniversary watches (35,-). Come and visit the CERN Shop Stand and find your Christmas presents. DSU-CO group

  15. CERN Shop - Christmas Sale on 12 and 13 December

    CERN Document Server

    2007-01-01

    Looking for Christmas present ideas? As every year, we will be running a CERN Shop stand in the Main Building, ground floor, on Wednesday 12 and Thursday 13 December from 10.30 to 16.30. Some new items will be on sale, such as cool fridge magnets and fleeces. The 2008 CERN calendar will be also available at the price of 10 CHF. Some items will have special reductions. Come and visit the CERN Shop stand and find your Christmas presents. DSU-CO group

  16. PaintShop Pro X4 for photographers

    CERN Document Server

    McMahon, Ken

    2012-01-01

    Great for those new to PaintShop Pro or digital imaging in general, this book is packed with inspirational, full-color images and easy to follow, step-by-step projects that will have you producing great images in PaintShop Pro in no time! Everything you need to turn your photos into stunning works of art is right here in this Corel-reviewed guide. In this new edition, Ken covers new features including how to make the most of the newly organized workspaces, use the redesigned HDR tool, and instantly publish photos on Flickr and Facebook. Squeeze every ounce of detail out of RAW files using the

  17. Developing a System Architecture for Holonic Shop Floor Control

    DEFF Research Database (Denmark)

    Sørensen, Christian; Langer, Gilad; Alting, Leo

    1998-01-01

    This paper describes the results of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular its corresponding reference architecture serves as the basis for the development of a system-architecture for shop floor control systems in a multi-cellular c......This paper describes the results of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular its corresponding reference architecture serves as the basis for the development of a system-architecture for shop floor control systems in a multi...

  18. Energy efficiency in U.K. shopping centres

    Science.gov (United States)

    Mangiarotti, Michela

    Energy efficiency in shopping centres means providing comfortable internal environment and services to the occupants with minimum energy use in a cost-effective and environmentally sensitive manner. This research considers the interaction of three factors affecting the energy efficiency of shopping centres: i) performance of the building fabric and services ii) management of the building in terms of operation, control, maintenance and replacement of the building fabric and services, and company's energy policy iii) occupants' expectation for comfort and awareness of energy efficiency. The aim of the investigation is to determine the role of the above factors in the energy consumption and carbon emissions of shopping centres and the scope for reducing this energy usage by changing one or all the three factors. The study also attempts to prioritize the changes in the above factors that are more cost-effective at reducing that energy consumption and identify the benefits and main economic and legal drivers for energy efficiency in shopping centres. To achieve these targets, three case studies have been analysed. Using energy data from bills, the performance of the selected case studies has been assessed to establish trends and current energy consumption and carbon emissions of shopping centres and their related causes. A regression analysis has attempted to break down the energy consumption of the landlords' area by end-use to identify the main sources of energy usage and consequently introduce cost-effective measures for saving energy. A monitoring and occupants' survey in both landlords' and tenants' areas have been carried out at the same time to compare the objective data of the environmental conditions with the subjective impressions of shoppers and shopkeepers. In particular, the monitoring aimed at assessing the internal environment to identify possible causes of discomfort and opportunities for introducing energy saving measures. The survey looked at

  19. Crystalline roof glazing - Westside shopping centre, Berne; Kristalline Dachverglasungen

    Energy Technology Data Exchange (ETDEWEB)

    Enkerli, W.

    2009-07-01

    This illustrated article takes a look at the new shopping and leisure centre on the western outskirts of Berne, Switzerland. In particular, the roof of this unusual building over the motorway with its sloping walls and zig-zag design is looked at. The centre's shopping mall, adventure baths and spa, a multiplex cinema, an old peoples' home and a hotel are briefly discussed, as is the embedding of the centre in its suburban environment. The roof construction with its crystalline skylights is examined and discussed in detail. The centre's building technical services are also briefly commented on.

  20. Strategic Insights from Mystery Shopping in B2B Relationships

    DEFF Research Database (Denmark)

    Mattsson, Jan

    2012-01-01

    This paper describes how mystery shopping can be used to gain valuable strategic input in B2B service relationships. We account for a longitudinal case study framed as a natural experiment (duration 18 months) in a Swedish group of consultancy companies offering a wide selection of industrial...... guideline covering the themes of map, smoke and mirror as metaphors) has been extended to comprise a larger group of engineers and may be taken up in a company-wide way. The experiment was deemed effective in developing both a procedure for mystery shopping and a new way to train the consultants....

  1. PaintShop Pro x6 for photographers

    CERN Document Server

    McMahon, Ken

    2014-01-01

    Written for photographers of all levels, PaintShop Pro X6 for Photographers is packed with inspirational, full-color images and easy-to-follow step-by-step projects that will have you producing great images in PaintShop Pro in no time! Everything you need to enhance and improve your digital photography is right here in this Corel® endorsed guide.In this new edition, Ken McMahon looks at the pros and cons of the new, faster 64-bit version of the software and covers new features, including working with the Instant Effects palette, using the Smart selection brush, mapping photos, automatically ta

  2. JOB SHOP METHODOLOGY BASED ON AN ANT COLONY

    Directory of Open Access Journals (Sweden)

    OMAR CASTRILLON

    2009-01-01

    Full Text Available The purpose of this study is to reduce the total process time (Makespan and to increase the machines working time, in a job shop environment, using a heuristic based on ant colony optimization. This work is developed in two phases: The first stage describes the identification and definition of heuristics for the sequential processes in the job shop. The second stage shows the effectiveness of the system in the traditional programming of production. A good solution, with 99% efficiency is found using this technique.

  3. The Virtual Shopping Aisle: More or Less Work?

    Science.gov (United States)

    Oliver, Dave; Livermore, Celia Romm

    This chapter explores Internet-based grocery shopping. A review of self-service and associated technologies is followed by a discussion of the three main styles of grocery shopping: over-the-counter, self-service and online. The chapter focuses on the distribution of work between the supplier and the customer in each of these modes. We observe some features of the self-service phenomenon which question prevailing assumptions about self-service activities, namely that they replace work done by employees with work done by customers.

  4. Science Shop and NGO activities related to air pollution

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Brodersen, Søsser

    2005-01-01

    The paper describes activities, which these organisations and science shops carry out within the field of air pollution and its analysis, abatement and prevention. The activities have been mapped and analysed through dialogue with a number of these organisations. The activities include activities...... with focus on development of citizens' capacity for measurement and assessment of air pollution and strategies for abatement and prevention of air pollution. The paper discusses also possibilities for further development of dialogue and co-operation between civil society, science shops and ACCENT researchers....

  5. PrestaShop 1.5 beginner's guide

    CERN Document Server

    Caro, Jose Antonio Tizon

    2013-01-01

    This book is written in a friendly voice with lots of tips, tricks, and screenshots to help you set up, extend, and personalize your own online shop. If you want to start your own e-commerce business, then this book will help you do that.This book is for people who are interested in creating an online shop. Basic HTML and CSS skills would be beneficial but are not required as we will provide you with all the code and know-how you need.

  6. How Can Stores Sustain Their Businesses? From Shopping Behaviors and Motivations to Environment Preferences

    Directory of Open Access Journals (Sweden)

    Rachel J.C. Chen

    2013-02-01

    Full Text Available The purpose of this study was to (1 discover consumer purchasing behaviors while shopping as a tourist and shopping at home, and (2 investigate tourist shopping preferences for an ideal shopping environment. A sample of 1,235 respondents participated in this study. Survey participants were asked to evaluate what store attributes they desired and what sources of information they used while selecting a store to shop in during their trips. Results indicate that consumers utilized various shopping channels while shopping in various environments. Also, different types of consumers exhibited clear preferences toward their ideal shopping environment. The results of this study are helpful for future service providers, tourism businesses, and tourism retailers to plan product development, provide better services, and equip a wider range of service skills.

  7. Design and Testing of an Air Force Services Mystery Shopping Program

    National Research Council Canada - National Science Library

    Hall, Justin

    1998-01-01

    .... Background The use of mystery shoppers to evaluate customer service experiences is widely used in commercial foodservice and hotel industries. Many companies "shop" their properties with inhouse programs while others contract an independent company to perform the shopping.

  8. Trip attraction rates of shopping centers in Northern New Castle County, Delaware.

    Science.gov (United States)

    2004-07-01

    This report presents the trip attraction rates of the shopping centers in Northern New : Castle County in Delaware. The study aims to provide an alternative to ITE Trip : Generation Manual (1997) for computing the trip attraction of shopping centers ...

  9. Teens: Want a Brighter Smile? Visit the Dentist, Not the Shopping Mall

    Science.gov (United States)

    ... a Brighter Smile? Visit the Dentist, not the Shopping Mall Article Chapters Teens: Want a Brighter Smile? Visit the Dentist, not the Shopping Mall print full article print this chapter email this ...

  10. Design and Testing of an Air Force Services Mystery Shopping Program

    National Research Council Canada - National Science Library

    Hall, Justin

    1998-01-01

    .... Other service quality measurement methods such as mystery shopping are rarely used. Bases do not consider using mystery shopping programs because of the significant resources required to start the program...

  11. The Association between Maximal Bench Press Strength and Isometric Handgrip Strength among Breast Cancer Survivors

    Science.gov (United States)

    Rogers, Benjamin H.; Brown, Justin C.; Gater, David R.; Schmitz, Kathryn H.

    2016-01-01

    Objective One-repetition maximum (1-RM) bench press strength is considered the gold standard to quantify upper-body muscular strength. Isometric handgrip strength is frequently used as a surrogate for 1-RM bench press strength among breast cancer (BrCa) survivors. The relationship between 1-RM bench press strength and isometric handgrip strength, however, has not been characterized among BrCa survivors. Design Cross-sectional study. Setting Laboratory. Participants Community-dwelling BrCa survivors. Interventions Not applicable. Main Outcome Measure 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer with three maximal contractions of left and right hands. All measures were conducted by staff with training in clinical exercise testing. Results Among 295 BrCa survivors, 1-RM bench press strength was 18.2±6.1 kg (range: 2.2-43.0) and isometric handgrip strength was 23.5±5.8 kg (range: 9.0-43.0). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=0.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7 kg (95% limits of agreement: −8.2 to 17.6). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=0.31; Pstrength (R2=0.23). Conclusions Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among BrCa survivors. 1-RM bench press and isometric handgrip strength quantify distinct components of muscular strength. PMID:27543047

  12. Old star clusters: Bench tests of low mass stellar models

    Directory of Open Access Journals (Sweden)

    Salaris M.

    2013-03-01

    Full Text Available Old star clusters in the Milky Way and external galaxies have been (and still are traditionally used to constrain the age of the universe and the timescales of galaxy formation. A parallel avenue of old star cluster research considers these objects as bench tests of low-mass stellar models. This short review will highlight some recent tests of stellar evolution models that make use of photometric and spectroscopic observations of resolved old star clusters. In some cases these tests have pointed to additional physical processes efficient in low-mass stars, that are not routinely included in model computations. Moreover, recent results from the Kepler mission about the old open cluster NGC6791 are adding new tight constraints to the models.

  13. Studies of cooling tower components on the Mistral test bench

    International Nuclear Information System (INIS)

    Legrand, G.

    1992-07-01

    The conception of a humid air cooling tower with natural or forced draught, requires the knowledge of the thermal and aerodynamic exchange surfaces performances. Several points, among which the distribution nozzles and drift eliminators efficiencies, or the mechanical behavior of the components, should be considered. In order to be able to test this type of equipment and analyse its behavior, ELECTRICITE DE FRANCE set up in 1987 of a large dimensions test bench: MISTRAL. The investigations performed over the 3000 working hours of MISTRAL concern mainly the optimization of the counterflow and crossflow exchange surfaces proposed by the industrial cooling tower equipment suppliers. The quality of the experimental results is assured by the implementation of an extensive instrumentation on the air and water circuits, and by a severe control of the tests conditions

  14. Medical immunology: two-way bridge connecting bench and bedside.

    Science.gov (United States)

    Rijkers, Ger T; Damoiseaux, Jan G M C; Hooijkaas, Herbert

    2014-12-01

    Medical immunology in The Netherlands is a laboratory specialism dealing with immunological analyses as well as pre- and post-analytical consultation to clinicians (clinical immunologists and other specialists) involved in patients with immune mediated diseases. The scope of medical immunology includes immunodeficiencies, autoimmune diseases, allergy, transfusion and transplantation immunology, and lymphoproliferative disorders plus the monitoring of these patients. The training, professional criteria, quality control of procedures and laboratories is well organized. As examples of the bridge function of medical immunology between laboratory (bench) and patient (bedside) the contribution of medical immunologists to diagnosis and treatment of primary immunodeficiency diseases (in particular: humoral immunodeficiencies) as well as autoantibodies (anti-citrullinated proteins in rheumatoid arthritis) are given. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Dynamic MTF, an innovative test bench for detector characterization

    Science.gov (United States)

    Emmanuel, Rossi; Raphaël, Lardière; Delmonte, Stephane

    2017-11-01

    PLEIADES HR are High Resolution satellites for Earth observation. Placed at 695km they reach a 0.7m spatial resolution. To allow such performances, the detectors are working in a TDI mode (Time and Delay Integration) which consists in a continuous charge transfer from one line to the consecutive one while the image is passing on the detector. The spatial resolution, one of the most important parameter to test, is characterized by the MTF (Modulation Transfer Function). Usually, detectors are tested in a staring mode. For a higher level of performances assessment, a dedicated bench has been set-up, allowing detectors' MTF characterization in the TDI mode. Accuracy and reproducibility are impressive, opening the door to new perspectives in term of HR imaging systems testing.

  16. The Bench: An open drug scene and its people

    Directory of Open Access Journals (Sweden)

    Grønnestad Trond Erik

    2015-04-01

    Full Text Available AIMS - This article describes life in an open illicit drug milieu in a Norwegian city. This site, called “the Bench”, is a stigmatised place, and if one sits there, one is marked with the stigma of the place. Our aim is to gain insights into what stigmatised people gain from frequently visiting and staying in a public place that in itself is stigmatised. METHOD - One of the authors spent a year of participant observation, studying what went on at the Bench. He managed to build rapport in a gradual process of inclusion. The theoretical perspective rests on classic ethnography, symbolic interactionism and sociology on labelling and purity and dirt. RESULTS - “The Bench” is not only a local drug market, but also a social meeting place in which one can feel dignity, and where a certain humanisation process takes place through the rituals of everyday life. On “the Bench” it is possible to tell stories of decay, failures and shortcomings in life, stories that in other social arenas would be interpreted as symbols of stigma and degradation. “The Bench” is also a place in which different established power relations may be turned around through storytelling and jokes. This provides the bench-sitters with a sense of mutual control and agency. CONCLUSION - Socialising at “the Bench” is an expression of the need among social human beings to have their existences confirmed, in a society where they have been marginalised and looked upon as second-class citizens, as urban outcasts.

  17. Bench-Scale Demonstration of Hot-Gas Desulfurization Technology

    International Nuclear Information System (INIS)

    Portzer, Jeffrey W.; Gangwal, Santosh K.

    1997-01-01

    Prior to the current project, development of the DSRP was done in a laboratory setting, using synthetic gas mixtures to simulate the regeneration off-gas and coal gas feeds. The objective of the current work is to further the development of zinc titanate fluidized-bed desulfurization (ZTFBD) and the DSRP for hot-gas cleanup by testing with actual coal gas. The objectives of this project are to: (1) Develop and test an integrated, skid-mounted, bench-scale ZTFBD/DSRP reactor system with a slipstream of actual coal gas; (2) Test the bench-scale DSRP over an extended period with a slipstream of actual coal gas to quantify the degradation in performance, if any, caused by the trace contaminants present in coal gas (including heavy metals, chlorides, fluorides, and ammonia); (3) Expose the DSRP catalyst to actual coal gas for extended periods and then test its activity in a laboratory reactor to quantify the degradation in performance, if any, caused by static exposure to the trace contaminants in coal gas; (4) Design and fabricate a six-fold larger-scale DSRP reactor system for future slipstream testing; (5) Further develop the fluidized-bed DSRP to handle high concentrations (up to 14 percent) of SO 2 that are likely to be encountered when pure air is used for regeneration of desulfurization sorbents; and (6) Conduct extended field testing of the 6X DSRP reactor with actual coal gas and high concentrations of SO 2 . The accomplishment of the first three objectives--testing the DSRP with actual coal gas, integration with hot-gas desulfurization, and catalyst exposure testing--was described previously (Portzer and Gangwal, 1994, 1995; Portzer et al., 1996). This paper summarizes the results of previous work and describes the current activities and plans to accomplish the remaining objectives

  18. Fatigue effects on bar kinematics during the bench press.

    Science.gov (United States)

    Duffey, Michael J; Challis, John H

    2007-05-01

    The bench press is one of the most popular weight training exercises. Although most training regimens incorporate multiple repetition sets, there are few data describing how the kinematics of a lift change during a set to failure. To examine these changes, recreational lifters (10 men and 8 women) were recruited. The maximum weight each subject could bench press (1RM) was determined. Subjects then performed as many repetitions as possible at 75% of the 1RM load. Three-dimensional kinematic data were recorded and analyzed for all lifts. Statistical analysis revealed that differences between maximal and submaximal lifts and the kinematics of a submaximal lift change as a subject approaches failure in a set. The time to lift the bar more than doubled from the first to the last repetition, causing a decrease in both mean and peak upward velocity. Furthermore, the peak upward velocity occurred much earlier in the lift phase in these later repetitions. The path the bar followed also changed, with subjects keeping the bar more directly over the shoulder during the lift. In general, most of the kinematic variables analyzed became more similar to those of the maximal lift as the subjects progressed through the set, but there was considerable variation between subjects as to which repetition was most like the maximal lift. This study shows that there are definite changes in the lifting kinematics in recreational lifters during a set to failure and suggests it may be particularly important for coaches and less-skilled lifters to focus on developing the proper bar path, rather than reaching momentary muscular failure, in the early part of a training program.

  19. Presence of Spotters Improves Bench Press Performance: A Deception Study.

    Science.gov (United States)

    Sheridan, Andrew; Marchant, David C; Williams, Emily L; Jones, Hollie S; Hewitt, Phil A; Sparks, S Andy

    2017-10-24

    Sheridan, A, Marchant, DC, Williams, EL, Jones, HS, Hewitt, PA, and Sparks, SA. Presence of spotters improves bench press performance: a deception study. J Strength Cond Res XX(X): 000-000, 2017-Resistance exercise is a widely used method of physical training in both recreational exercise and athletic populations. The use of training partners and spotters during resistance exercise is widespread, but little is known about the effect of the presence of these individuals on exercise performance. The purpose of the current study was to investigate the effect of spotter presence on bench press performance. Twelve recreationally trained participants (age, 21.3 ± 0.8 years, height, 1.82 ± 0.1 m, and weight, 84.8 ± 11.1 kg) performed 2 trials of 3 sets to failure at 60% of 1 repetition maximum on separate occasions. The 2 trials consisted of spotters being explicitly present or hidden from view (deception). During the trials, total repetitions (reps), total weight lifted, ratings of perceived exertion (RPE), and self-efficacy were measured. Total reps and weight lifted were significantly greater with spotters (difference = 4.5 reps, t = 5.68, p < 0.001 and difference = 209.6 kg, t = 5.65, p < 0.001, respectively). Although RPE and local RPE were significantly elevated in the deception trials (difference = 0.78, f = 6.16, p = 0.030 and difference = 0.81, f = 5.89, p = 0.034, respectively), self-efficacy was significantly reduced (difference = 1.58, f = 26.90, p < 0.001). This study demonstrates that resistance exercise is improved by the presence of spotters, which is facilitated by reduced RPE and increased self-efficacy. This has important implications for athletes and clients, who should perform resistance exercise in the proximity of others, to maximize total work performed.

  20. Comparison of the risks of shopping behavior and opioid abuse between tapentadol and oxycodone and association of shopping behavior and opioid abuse.

    Science.gov (United States)

    Cepeda, M Soledad; Fife, Daniel; Kihm, Mary A; Mastrogiovanni, Greg; Yuan, Yingli

    2014-12-01

    This study compared the risks of opioid shopping behavior and opioid abuse between tapentadol immediate release and oxycodone immediate release and, to validate the definition of shopping, examined the association between opioid shopping and opioid abuse further. This retrospective cohort study using linked dispensing and diagnosis databases followed opioid-naive patients for development of shopping behavior and/or opioid abuse during 1 year after initial exposure to tapentadol or oxycodone. Shopping was defined by having overlapping opioid prescriptions from >1 prescriber filled at ≥3 pharmacies; abuse by having International Classification of Diseases, 9th revision diagnoses reflecting opioid abuse, addiction, or dependence. To determine their association, we cross-tabulated shopping and opioid abuse and calculated odds ratios. Risks of developing each outcome were estimated using logistic regression. Among 277,401 participants initiating opioid use with tapentadol (39,524) or oxycodone (237,877), 0.6% developed shopping behavior, 0.75% developed abuse. Higher proportions of patients in the oxycodone group developed shopping behavior and abuse than in the tapentadol group (shopping: adjusted odds ratio [95% confidence interval], 0.45 [0.36-0.55]; abuse: 0.44 [0.37-0.54]). Shopping behavior and abuse were associated; of those with shopping behavior, 6.5% had abuse. Age (18 to 64 y), sex (male), prior benzodiazepine use, paying cash, and history (mood disorders, abuse of nonopioid medications, and back pain) were risk factors for developing either outcome. Shopping behavior and abuse measure complementary, but associated, constructs, which further validates the current definition of shopping. The risk of developing either is lower among patients who initiate opioid use with tapentadol than those who initiate opioid use with oxycodone.

  1. Ranking Parameters on Quality of Online Shopping Websites Using Multi-Criteria Method

    OpenAIRE

    Mehrbakhsh Nilashi; Karamollah Bagherifard; Othman Ibrahim; Nasim Janahmadi; Leila Ebrahimi

    2012-01-01

    The growing use of Internet in Malaysia provides a developing prospect of online shopping for international students. Also, international students are an outstanding group in online shopping in Malaysia. In view of this, in order to improve increase online shopping among international students and Malaysian online shopping, a research framework was proposed and a survey of international student was done. Proposed research framework considers three key dimensions service quality, information q...

  2. The new century: Lessons learned from Singapore's shopping sector during the 1990's

    OpenAIRE

    Brenda J. Moscove; Robert G. Fletcher

    2001-01-01

    Singapore's main shopping corridor, Orchard Road, is being challenged as the international shopping paradise for residents and visitors. It no longer reigns supreme as the mecca for international shopping. The loss of prestige and dominance can be attributed to recent shifts in the Singaporean and regional marketplace such as: economic recession, tourism industry slump, societal concerns, technological trends and innovations, shopping sector development in the region, and political uncertaint...

  3. New Digital Marketing Actors: Private Shopping Clubs and Their Advertising Practices

    Directory of Open Access Journals (Sweden)

    Nazlım Tüzel Uraltaş

    2014-12-01

    In the first part of the study the concept of digital marketing and its historical background will be explained. In the second part online shopping behavior, online shopping training activities in Turkey and private shopping clubs will be examined.  The last part of the study will deal with the advertising practices of private shopping clubs. The study is essentially a literature review; thus, the resources are mostly secondary in nature.

  4. Penerapan Algoritma Genetika Untuk Masalah Penjadwalan Job Shop Pada Lingkungan Industri Pakaian

    OpenAIRE

    Sitanggang, Hendrik

    2011-01-01

    Pada industri pakaian khususnya yang proses produksinya berbaur dan multi produk sering mengalami kesulitan pada penjadwalan job shop. Oleh karena itu, perlu diadakan penelitian untuk penjadwalan job shop yang efektif terutama yang proses produksinya berbaur dan multi produk. Pada tulisan ini akan diajukan metode untuk penjadwalan job shop yang berbaur dan multi produk dengan tujuan meminimalkan total pinalti E/T (Earliness/Tardiness) dengan menentukan start pada masing-masing job shop dan ba...

  5. High School Girls’ Shopping Mall Experiences, Perceptions and Expectations: A Qualitative Study

    OpenAIRE

    Burcu Ilter TABAK; Ozge OZGEN; Bilge AYKOL

    2006-01-01

    Shopping malls have become an important part of the economic and social fabric of Turkey especially in some of the big cities. In Izmir, there are currently eight shopping malls and this number is expected to increase due to the interest of consumers and investors in shopping malls. This can lead to over saturation triggering high level of competition. Thus deeper understanding of consumer expectations, experiences and perceptions regarding mall image has become much more essential. Shopping ...

  6. Examining Online Shopping Services in Relation to Experience and Frequency of Using Internet Retailing

    OpenAIRE

    Alin OPREANA

    2013-01-01

    E-shopping has the potential to replace traditional in-store shopping. It is well perceived that information and communication technologies have great impacts on modern society - they are changing how and where we work, shop, and in general terms how we live our lives. In this study, we use a survey instrument to examine the association between experience level with Internet and e-shopping and consumers’ frequency of online purchasing, while considering sex as a passive influencer. We study t...

  7. A Strategic Planning for a College Student-Segment Shopping Mall

    OpenAIRE

    Astri Anindya Sari; Hanson Endra Kusuma; Baskoro Tedjo

    2011-01-01

    In the midst of shopping mall development today, an understanding of consumer behaviors and preferences is absolutely a must if we want to plan successfuly a shopping mall. This knowledge will provide input for strategic planning so that the concept offered for shopping mall development will meet the consumers’ demand and may win the market competition. This study explores the preferences of students in Bandung as one of the potential market segments of the shopping mall. Qualitative study w...

  8. A Study on Customer Awareness and Satisfaction towards Flipkart Shopping - With Special Reference to Pollachi Taluk

    OpenAIRE

    Dr.M. Deepa; K.Sasikala

    2017-01-01

    There are number of various websites are Amazon, snap deal, flip kart are available online shopping and they are playing an essential role in fulfilling the needs of customer. Flip kart is one among them and it is ranked as first preferred online shopping now days the customer are more dynamic. Their needs and preference can be changing as per the current scenario. The development of the online shopping sites mainly depends on the customer awareness & satisfaction. Online shopping has many ad...

  9. Shopping behaviour and attribute evaluation of expatriates – A cross-cultural study

    NARCIS (Netherlands)

    Wijnen, G.J.; Kemperman, A.D.A.M.; Janssen, I.I.

    2011-01-01

    This study explores how shopping centre attributes can be adapted to culture-related shopping behaviour of expatriates. The study is relevant since only limited information is available on consumer behaviour of this target group and since insight in the heterogeneity of consumer shopping behaviour

  10. Attitudes toward buying online as predictors of shopping online for British and American respondents.

    Science.gov (United States)

    Yang, Bijou; Lester, David; James, Simon

    2007-04-01

    This study compared the attitudes toward online shopping of British and American individuals. Using a sample of 327 British and American university students, the British respondents were found to have less favorable attitudes toward online shopping. Attitudes toward online shopping were found to be significant predictors of making online purchases. The implications of these results were discussed and suggestions made for future research.

  11. Beyond Promotion-Based Store Switching : Antecedents and Consequences of Systematic Multiple-Store Shopping

    NARCIS (Netherlands)

    Gijsbrechts, E.; Campo, K.; Nisol, P.

    2005-01-01

    In this paper, we demonstrate that single-purpose multiple store shopping is not only driven by opportunistic, promotion-based motivations, but may also be part of a longer term shopping planning process based on stable store characteristics.Starting from a utility-maximizing shopping behavior

  12. The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later.

    Science.gov (United States)

    Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

    2017-01-01

    Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as "helpful/patient/respectful," and 4) report of the physical environment as "bar type." Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations.

  13. The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later

    Science.gov (United States)

    Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

    2017-01-01

    INTRODUCTION Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. METHODS Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. RESULTS Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as “helpful/patient/respectful,” and 4) report of the physical environment as “bar type.” CONCLUSIONS Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations. PMID:29057379

  14. Tightening the Dutch coffee shop policy: Evaluation of the private club and the residence criterion

    NARCIS (Netherlands)

    van Ooyen-Houben, M.M.J.; Bieleman, B.; Korf, D.J.

    2016-01-01

    Background The Dutch coffee shop policy was tightened in 2012. Two additional criteria that coffee shops must adhere to in order for them to be tolerated came into force: the private club and the residence criterion. Coffee shops were only permitted to give access to members and only residents of

  15. Social movements and their knowledge needs – the experience from European Science Shops

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    Definition of science shop: research support to civil society Cases from the Netherlands and Denmark Topics in the lecture: The international network of Science Shops – an invitation An overview of health related projects Community-based research in Europe A mutual relationship between civil...... society and university? How to consider the need for Science Shops?...

  16. The performance of workload control concepts in job shops : Improving the release method

    NARCIS (Netherlands)

    Land, MJ; Gaalman, GJC

    1998-01-01

    A specific class of production control concepts for jobs shops is based on the principles of workload control. Practitioners emphasise the importance of workload control. However, order release methods that reduce the workload on the shop floor show poor due date performance in job shop simulations.

  17. ENVIRONMENTAL ASSESSMENT OF SHOP TOWEL USAGE IN THE AUTOMOTIVE AND PRINTING INDUSTRIES

    Science.gov (United States)

    This assessment identifies the environmental impacts and usage trends of shop towels in the printing and automotive repair industries. The shop towels are used to clean equipment and to wipe up contaminants for a variety of operations. Four types of shop towels were evaluated; wo...

  18. Opioid shopping behavior: how often, how soon, which drugs, and what payment method.

    Science.gov (United States)

    Cepeda, M Soledad; Fife, Daniel; Chow, Wing; Mastrogiovanni, Gregory; Henderson, Scott C

    2013-01-01

    Doctor shopping (obtaining opioid prescriptions from multiple prescribers) is one example of opioid abuse and diversion. The authors assessed how soon shopping behavior was observed after opioid exposure, number of events per shopper, preferred opioids, and method of payment. This was a cohort study. Individuals with ≤1 dispensing for any opioid in 2008 were followed for 18 months. Shopping behavior was defined as ≤2 prescriptions by different prescribers with ≤1 day of overlap and filled at ≤3 pharmacies. Of 25,161,024 subjects, 0.30% exhibited shopping behavior. Opioid-experienced subjects were 13.7 times more likely to exhibit shopping behavior and had more shopping episodes than opioid-naive subjects. Time to first shopping event was 246.90 ± 163.61 days. Number of episodes was 2.74 ± 4.66. Most subjects with shopping behavior (55.27%) had 1 shopping episode, whereas 9.52% had ≤6 episodes; 88.99% had ≤4 prescribers. Subjects with shopping behavior filled schedule II opioids more often than subjects without shopping behavior (19.51% vs 10.89%) and more often paid in cash (44.85% vs 18.54%). Three of 1000 people exposed to opioids exhibit shopping behavior, on average, 8 months after exposure. Opioid shoppers seek strong opioids, avoid combination products, often pay cash, and obtain prescriptions from few prescribers. © 2012 The Author(s).

  19. Course-Shopping in the Urban Community Colleges: An Analysis of Student Drop and Add Activities.

    Science.gov (United States)

    Hagedorn, Linda Serra; Maxwell, William B.; Cypers, Scott; Moon, Hye Sun; Lester, Jaime

    This study examines the course shopping behaviors of approximately 5,000 community college students enrolled across the nine campuses of the Los Angeles Community College District in spring 2001. The sample students are representative of the district. For the purpose of this analysis, the authors define course shopping as: (1) cyclic shopping, the…

  20. Rules for Adaptive Learning and Assistance on the Shop Floor

    Science.gov (United States)

    Ullrich, Carsten

    2016-01-01

    Today's shop floor, the area of a factory where operatives assemble products, is a complex and demanding work environment. The employed and produced technology becomes ever more complex, and employees are responsible for an increasing amount of tasks. As a consequence, the employee is under constant pressure to solve problems occurring on the shop…

  1. Macroeconomic implications of virtual shopping : a theoretical approach

    NARCIS (Netherlands)

    Yetkiner, I. Hakan; Horvath, Csilla

    2000-01-01

    Recently, parallel to developments in the communication technology, online shopping has become increasingly popular for many products, like books, CDs, software, and computers. Most analysts conjecture that the future will witness a wider basket of products and a higher trade volume via the

  2. Mall shopping preferences and patronage of mature shoppers

    Directory of Open Access Journals (Sweden)

    Gabriel G. Rousseau

    2014-04-01

    Research purpose: The purpose of this study was to investigate the buying behaviour of mature consumers (older than 55 in Port Elizabeth shopping malls. Motivation for the study: The perception of mature shoppers as old people with limited financial resources is untrue. This study investigates the behaviours of mature shoppers. Research design, approach and method: A model guided the investigation. The authors facilitated four focus groups to gain insight into mature consumers’ buying behaviours. A field survey followed with a sample of mall shoppers (n = 680. The authors performed content analysis of the focus group material and used SPSS and AMOS programs to analyse the data quantitatively. Main findings: Focus group interviews revealed specific buying behaviours of mature shoppers. The survey showed significant relationships between various determinants that influence respondents’ buying behaviours with adequate model fit indices. These results confirmed the convergent and discriminant validity of the model that comprises mall shopping anticipation, experience and patronage. Practical/managerial implications: Mature shoppers’ expectations exceeded their experiences, suggesting dissatisfaction with some aspects of their experiences. Retailers and shopping mall managers need to redesign malls if they wish to cater for the segment of ageing shoppers and their spending power. Contribution/value-add: The study contributes to the research available in South Africa on service at shopping malls that cater for mature consumers.

  3. Apparel shopping orientation: Two decades of research | Visser ...

    African Journals Online (AJOL)

    Apparel shopping orientation: Two decades of research. EM Visser, R du Preez. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

  4. Editorial: The need for reducing plastic shopping bag use and ...

    African Journals Online (AJOL)

    Editorial: The need for reducing plastic shopping bag use and disposal in Africa. S Rayne. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

  5. Sequencing for Batch Production in a Group Flowline Machine Shop ...

    African Journals Online (AJOL)

    The purpose of the paper is to develop a useful technique for sequencing batches of components through machine shops arranged under the group flowline production system. The approach is to apply a modified version of Petrov's group flowline technique for machining components which follow a unidirectional route.

  6. Web experience effects in a virtual shopping interaction environment

    NARCIS (Netherlands)

    Lorenzo-Romero, C.; Constantinides, Efthymios; Gomez-Borja, M.A.; Lin, A.; Foster, J.; Scifleet, P.

    2013-01-01

    The objective of this chapter is to contextualize the concepts of web atmospherics and web experience in the particular case of a shopping situation in the Internet environment. Based on a broader concept of user experience, the chapter identifies the main influencers of consumer behaviour in the

  7. Shopping Effort Classification: Implications for Segmenting the College Student Market

    Science.gov (United States)

    Wright, Robert E.; Palmer, John C.; Eidson, Vicky; Griswold, Melissa

    2011-01-01

    Market segmentation strategies based on levels of consumer shopping effort have long been utilized by marketing professionals. Such strategies can be beneficial in assisting marketers with development of appropriate marketing mix variables for segments. However, these types of strategies have not been assessed by researchers examining segmentation…

  8. Assessing One-stop-shop Best Practices for South African ...

    African Journals Online (AJOL)

    One stop shop (OSS) models are an investment process that came about to create a centralised place for the voluminous documentation required in international trade between companies. Bureaucracy has proven to be a major barrier to the development of international trade, particularly in African countries that still lag ...

  9. Machine Shop Practice. Trade and Industrial Education Course of Study.

    Science.gov (United States)

    Emerly, Robert J.; And Others

    Designed for secondary school students who are interested in becoming machinists, this beginning course guide in machine shop practice is organized into the following sections: (1) Introduction, (2) instructional plan, (3) educational philosophy, (4) specific course objectives, (5) course outline, (6) job sheets, and (7) operation sheets. The…

  10. Production Machine Shop Employment Competencies. Part Three: The Engine Lathe.

    Science.gov (United States)

    Bishart, Gus; Werner, Claire

    Competencies for production machine shop are provided for the third of four topic areas: the engine lathe. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish…

  11. A city park on top of shops and a dike

    NARCIS (Netherlands)

    van Veelen, P.C.; Voorendt, M.Z.; van der Zwet, C; Kothuis, Baukje; Kok, Matthijs

    2017-01-01

    The Roof Park ('Dakpark’) is an elevated park on a former railway yard in the Delfshaven quarter in Rotterdam. The park is located on top of the roof of a new shopping centre, which includes a parking garage (hence its name, ‘dak’ means ‘roof’). The park is the

  12. Cannabis use and proximity to coffee shops in the Netherlands

    NARCIS (Netherlands)

    Wouters, M.; Benschop, A.; van Laar, M.; Korf, D.J.

    2012-01-01

    The aim of this paper is to assess the influence of coffee shop availability on the prevalence and intensity of cannabis use, as well as the effectiveness of the ‘separation of markets’ policy. A convenience sample of nightlife visitors and a sub-selection of previous year cannabis users were used

  13. The variety, popularity and nutritional quality of tuck shop items ...

    African Journals Online (AJOL)

    Method: A cross-sectional tuck shop survey. Nutritional analyses were conducted using the ... Results: Savoury pies were the most popular lunch item for all learners for both breaks (n = 5, 45%, and n = 3, 27.3%), selling the most number of units (43) per day at eight schools (72.7%). Iced popsicles were sold at almost every ...

  14. Heuristics for no-wait flow shop scheduling problem

    Directory of Open Access Journals (Sweden)

    Kewal Krishan Nailwal

    2016-09-01

    Full Text Available No-wait flow shop scheduling refers to continuous flow of jobs through different machines. The job once started should have the continuous processing through the machines without wait. This situation occurs when there is a lack of an intermediate storage between the processing of jobs on two consecutive machines. The problem of no-wait with the objective of minimizing makespan in flow shop scheduling is NP-hard; therefore the heuristic algorithms are the key to solve the problem with optimal solution or to approach nearer to optimal solution in simple manner. The paper describes two heuristics, one constructive and an improvement heuristic algorithm obtained by modifying the constructive one for sequencing n-jobs through m-machines in a flow shop under no-wait constraint with the objective of minimizing makespan. The efficiency of the proposed heuristic algorithms is tested on 120 Taillard’s benchmark problems found in the literature against the NEH under no-wait and the MNEH heuristic for no-wait flow shop problem. The improvement heuristic outperforms all heuristics on the Taillard’s instances by improving the results of NEH by 27.85%, MNEH by 22.56% and that of the proposed constructive heuristic algorithm by 24.68%. To explain the computational process of the proposed algorithm, numerical illustrations are also given in the paper. Statistical tests of significance are done in order to draw the conclusions.

  15. Critical Success Factors of Internet Shopping: The Case of Japan

    Science.gov (United States)

    Atchariyachanvanich, Kanokwan; Okada, Hitoshi; Sonehara, Noboru

    This paper presents the results from a study conducted on the effect of differing factors on a customer's attitude towards using Internet shopping in Japan. The research model used was an extended version of the consumers' acceptance of virtual stores model with the addition of a new factor, need specificity, and a grouping of critical success factors based on their customer-centric and website-centric viewpoints sources. It examines how differences in the individual characteristics of customers affect the actual use of Internet shopping. According to an online questionnaire filled out by 1,215 online customers used to conduct a multiple regression analysis and a structural equation modeling analysis, the participant's gender, education level, innovativeness, net-orientation, and need specificity, which are the factors for the customer-centric viewpoints, have a positive impact on the actual use of Internet shopping. The implication also shows that Japanese online customers do not worry about the quality of service of Internet shopping, a factor in the website-centric viewpoint, as significantly as offline customers do.

  16. The effects of online shopping on the customer loyalty

    Directory of Open Access Journals (Sweden)

    Hamideh Afrashteh

    2014-09-01

    Full Text Available This paper investigates the use of Online Shopping as one of electronic marketing techniques as well as the effect of applying this shopping method and marketing on customer loyalty in Iran. The variables are extracted according to the review of literature and studies conducted in the field of shopping through cyberspace. A questionnaire is designed by applying these variables and distributed among a sample of service providers and users after testing its reliability and validity. Performing the statistical tests on the results of investigation led to the identification of effective factors. In addition, another questionnaire is distributed according to the obtained components in order to achieve a structural model for the impact of components on the customer loyalty. The structural equation modeling (SEM is designed to learn the impact of obtained components on customer loyalty as a basis influencing on the survival of business space using SEM method. The study identified different components affected by utilization of online shopping websites including comprehensive information system, system development, choice power, viability and system optimization.

  17. School tuck shops in South Africa—an ethical appraisal

    African Journals Online (AJOL)

    a formal tuck shop, at other schools, food vendors sell food either on or outside the school premises. ... Overweight and obesity, with a prevalence of 36.9% in men and ..... their association with BMI Z-score and fat mass in South African.

  18. Towards Shop Floor Hardware Reconfiguration for Industrial Collaborative Robots

    DEFF Research Database (Denmark)

    Schou, Casper; Madsen, Ole

    2016-01-01

    In this paper we propose a roadmap for hardware reconfiguration of industrial collaborative robots. As a flexible resource, the collaborative robot will often need transitioning to a new task. Our goal is, that this transitioning should be done by the shop floor operators, not highly specialized...

  19. Mystery shopping på Møn

    DEFF Research Database (Denmark)

    Kvistgaard, Peter; Smed, Karina Madsen

    2005-01-01

    betragtninger ud af, som vil blive præsenteret i løbet af efteråret 2005 sammen med de øvrige resulatater fra den store undersøgelse af turisters og lokales opfattelse af de mønske oplevelser. Men hvad er mystery shopping egentlig, hvordan kan instrumentet bruges, og kan det bruges i destinationsudvikling? Det...

  20. Analysis of multi-stage open shop processing systems

    NARCIS (Netherlands)

    Eggermont, C.E.J.; Schrijver, A.; Woeginger, G.J.; Schwentick, T.; Dürr, C.

    2011-01-01

    We study algorithmic problems in multi-stage open shop processing systems that are centered around reachability and deadlock detection questions. We characterize safe and unsafe system states. We show that it is easy to recognize system states that can be reached from the initial state (where the

  1. College Students' Perceived Attributes of Internet Websites and Online Shopping

    Science.gov (United States)

    Seock, Yoo-Kyoung; Norton, Marjorie J. T.

    2008-01-01

    The purpose of this study was to examine perceptions of attributes of clothing retailers' Internet websites in relation to previous and intended future purchase from the websites. Survey data from 414 U.S. college students, non-married and aged 18-22 with online clothing shopping experience and favorite clothing websites were used. Five clothing…

  2. The Development and Validation of the Online Shopping Addiction Scale.

    Science.gov (United States)

    Zhao, Haiyan; Tian, Wei; Xin, Tao

    2017-01-01

    We report the development and validation of a scale to measure online shopping addiction. Inspired by previous theories and research on behavioral addiction, the Griffiths's widely accepted six-factor component model was referred to and an 18-item scale was constructed, with each component measured by three items. The results of exploratory factor analysis, based on Sample 1 (999 college students) and confirmatory factor analysis, based on Sample 2 (854 college students) showed the Griffiths's substantive six-factor structure underlay the online shopping addiction scale. Cronbach's alpha suggested that the resulting scale was highly reliable. Concurrent validity, based on Sample 3 (328 college students), was also satisfactory as indicated by correlations between the scale and measures of similar constructs. Finally, self-perceived online shopping addiction can be predicted to a relatively high degree. The present 18-item scale is a solid theory-based instrument to empirically measure online shopping addiction and can be used for understanding the phenomena among young adults.

  3. The Development and Validation of the Online Shopping Addiction Scale

    Science.gov (United States)

    Zhao, Haiyan; Tian, Wei; Xin, Tao

    2017-01-01

    We report the development and validation of a scale to measure online shopping addiction. Inspired by previous theories and research on behavioral addiction, the Griffiths's widely accepted six-factor component model was referred to and an 18-item scale was constructed, with each component measured by three items. The results of exploratory factor analysis, based on Sample 1 (999 college students) and confirmatory factor analysis, based on Sample 2 (854 college students) showed the Griffiths's substantive six-factor structure underlay the online shopping addiction scale. Cronbach's alpha suggested that the resulting scale was highly reliable. Concurrent validity, based on Sample 3 (328 college students), was also satisfactory as indicated by correlations between the scale and measures of similar constructs. Finally, self-perceived online shopping addiction can be predicted to a relatively high degree. The present 18-item scale is a solid theory-based instrument to empirically measure online shopping addiction and can be used for understanding the phenomena among young adults. PMID:28559864

  4. The Development and Validation of the Online Shopping Addiction Scale

    Directory of Open Access Journals (Sweden)

    Haiyan Zhao

    2017-05-01

    Full Text Available We report the development and validation of a scale to measure online shopping addiction. Inspired by previous theories and research on behavioral addiction, the Griffiths's widely accepted six-factor component model was referred to and an 18-item scale was constructed, with each component measured by three items. The results of exploratory factor analysis, based on Sample 1 (999 college students and confirmatory factor analysis, based on Sample 2 (854 college students showed the Griffiths's substantive six-factor structure underlay the online shopping addiction scale. Cronbach's alpha suggested that the resulting scale was highly reliable. Concurrent validity, based on Sample 3 (328 college students, was also satisfactory as indicated by correlations between the scale and measures of similar constructs. Finally, self-perceived online shopping addiction can be predicted to a relatively high degree. The present 18-item scale is a solid theory-based instrument to empirically measure online shopping addiction and can be used for understanding the phenomena among young adults.

  5. Shopping Behavior Recognition using a Language Modeling Analogy

    NARCIS (Netherlands)

    Popa, M.C.; Rothkrantz, L.J.M.; Wiggers, P.; Shan, C.

    2012-01-01

    Automatic understanding and recognition of human shopping behavior has many potential applications, attracting an increasing interest inthe market- ing domain. The reliability and performance of the automatic recognition system is highly in uenced by the adopted theoretical model of behavior. In

  6. The impact of shopping mall development on small township retailers

    Directory of Open Access Journals (Sweden)

    Andre Ligthelm

    2012-05-01

    Full Text Available The retail sector forms a critical element of a community’s economic and social welfare. It provides people with choices and services. These choices were until recently very limited in township areas. The pre-1994 retail landscape was dominated by small, often informal businesses offering basic household necessities to relatively low income earners. This has resulted in township residents’ preference to shop outside townships, known as ‘outshopping’. Rapid income growth of township residents since 1994 resulted in a substantial increase in consumer expenditure in these areas, known as ‘in-bound shopping’. This lucrative emerging market forms the last retail frontier in South Africa and is being explored by national retailers, especially supermarket chains. This article is aimed at establishing the impact of shopping mall development in townships on the traditional small township retailers including spaza/tuck shops. The net balance sheet on the impact of shopping mall development on small township retailers clearly suggests a decline in the township retailers’ market share. A change in small business model towards, inter alia, effective customer service with a small dedicated assortment of merchandise, satisfaction of emergency needs, selling in small units and extension of credit facilities may result in the survival of some small township retailers (albeit often at a smaller turnover.

  7. Placement Evaluations and Remedial Education: Are Students Shopping for Bargains?

    Science.gov (United States)

    Fletcher, Stephen H.

    2014-01-01

    The purpose of this study is to provide evidence that students may be doing comparison shopping when it comes to community college placement in English and mathematics courses. Comparisons may occur because of the difference in the placement process across campuses and the variation in the levels of developmental education offered. The…

  8. No-Wait Job Shop Scheduling, a Constraint Propagation Approach

    NARCIS (Netherlands)

    Lennartz, P.M.

    2006-01-01

    Multi-machine scheduling problems have earned themselves a reputation of intractability. In this thesis we try to solve a special kind of these problems, the so-called no-wait job shop problems. In an instance of this problem-class we are given a number of operations that are to be executed on a

  9. Visualizing Separations: How Shopping Can Be Useful for Introducing Chromatography

    Science.gov (United States)

    Nagel, Megan L.

    2013-01-01

    A trip to the mall is used as a classroom demonstration to illustrate the fundamentals of separations without the need for chemicals or any chemistry background. Student volunteers are the "mixture", and depending on the shopping list they have been given, they spend varying amounts of time in the "stores" versus moving through…

  10. The Unacceptable "Flaneur": The Shopping Mall as a Teenage Hangout.

    Science.gov (United States)

    Matthews, Hugh; Taylor, Mark; Percy-Smith, Barry; Limb, Melanie

    2000-01-01

    Examines attitudes toward the role of the shopping mall as a place for congregating. Notes that adult attitudes reflect a discomfort with teenagers being in a place where they have no clear role, while teenagers transgress and question the spatial hegemony of adulthood, creating a "thirdspace" reflecting their place between adulthood and…

  11. The Shopping Mall: Film Chronotope of the 1980s.

    Science.gov (United States)

    Montgomery, Michael V.

    This paper examines the portrayal of shopping malls in the films of the 1980s and attempts to "narrativize" the trend found between the films as the story of a subculture as it adopts and develops a belief system based on consumerism. The paper begins with an exploration of the evolution of the mall as a modern meeting place and center…

  12. A model of multi-purpose shopping trip behavior

    NARCIS (Netherlands)

    Arentze, T.A.; Borgers, A.W.J.; Timmermans, H.J.P.

    1993-01-01

    Existing utility-based models of complex choice behavior do not adequately deal with the interdependencies of chained choices. In this paper, we introduce a model of multi-purpose shopping which is aimed at overcoming this shortcoming. In the proposed model, dependencies between choices within as

  13. Effects of placement point of background music on shopping website.

    Science.gov (United States)

    Lai, Chien-Jung; Chiang, Chia-Chi

    2012-01-01

    Consumer on-line behaviors are more important than ever due to highly growth of on-line shopping. The purposes of this study were to design placement methods of background music for shopping website and examine the effect on browsers' emotional and cognitive response. Three placement points of background music during the browsing, i.e. 2 min., 4 min., and 6 min. from the start of browsing were considered for entry points. Both browsing without music (no music) and browsing with constant music volume (full music) were treated as control groups. Participants' emotional state, approach-avoidance behavior intention, and action to adjust music volume were collected. Results showed that participants had a higher level of pleasure, arousal and approach behavior intention for the three placement points than for no music and full music. Most of the participants for full music (5/6) adjusted the background music. Only 16.7% (3/18) participants for other levels turn off the background music. The results indicate that playing background music after the start of browsing is benefit for on-line shopping atmosphere. It is inappropriate to place background music at the start of browsing shopping website. The marketer must manipulated placement methods of background music for a web store carefully.

  14. Worker flexibility in a parallel dual resource constrained job shop

    NARCIS (Netherlands)

    Yue, H.; Slomp, J.; Molleman, E.; van der Zee, D.J.

    2008-01-01

    In this paper we investigate cross-training policies in a dual resource constraint (DRC) parallel job shop where new part types are frequently introduced into the system. Each new part type introduction induces the need for workers to go through a learning curve. A cross-training policy relates to

  15. Applicability aspects of workload control in job shop production

    NARCIS (Netherlands)

    Henrich, P.

    2005-01-01

    The term Job Shop Production (JSP) describes a manufacturing environment that produces piece goods in small batches. It is a common manufacturing environment in small and medium-sized enterprises (SMEs). The incoming orders often differ in the number of ordered products, their design, process

  16. Direction-specific recruitment of rotator cuff muscles during bench press and row.

    Science.gov (United States)

    Wattanaprakornkul, Duangjai; Halaki, Mark; Cathers, Ian; Ginn, Karen A

    2011-12-01

    Recent studies indicate that rotator cuff (RC) muscles are recruited in a reciprocal, direction-specific pattern during shoulder flexion and extension exercises. The main purpose of this study was to determine if similar reciprocal RC recruitment occurs during bench press (flexion-like) and row (extension-like) exercises. In addition, shoulder muscle activity was comprehensively compared between bench press and flexion; row and extension; and bench press and row exercises. Electromyographic (EMG) activity was recorded from 9 shoulder muscles sites in 15 normal volunteers. All exercises were performed at 20, 50 and 70% of subjects' maximal load. EMG data were normalized to standard maximal voluntary contractions. Infraspinatus activity was significantly higher than subscapularis during bench press, with the converse pattern during the row exercise. Significant differences in activity levels were found in pectoralis major, deltoid and trapezius between the bench press and flexion exercises and in lower trapezius between the row and extension exercises. During bench press and row exercises, the recruitment pattern in each active muscle did not vary with load. During bench press and row exercises, RC muscles contract in a reciprocal direction-specific manner in their role as shoulder joint dynamic stabilizers to counterbalance antero-posterior translation forces. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. CONGESTION AS A RESULT OF SCHOOL AND SHOPPING CENTER ACTIVITY

    Directory of Open Access Journals (Sweden)

    Meike Kumaat

    2015-12-01

    Full Text Available Development of land use in public facilities such as shopping center and school gives an impact on transportation problem in Manado City, North Sulawesi.  To determine factors which have causal relationship with congestion  as a result of school and shopping center activity then it need to be assessed and studied.  Descriptive study with observational survey was used in this study. The study ran Structural Equation Modelling (SEM by using AMOS program. Estimated method was used to calculate sample size then found 300 repondents, comprised : visitors and mall managers, school visitors, parents, school managers, Public Works department, and urban planning department .The study yielded a statistically significant correlation between  school and shopping center activity with congestion s. The result  indicated that school activity was positively related to congestion with p value  at p=0,000 (p ≤ 0,05. Shopping center activity was positively related to congestion with p value  at p=0,000 (p ≤ 0,05. The closer proximity from school to shooping center will causes severe traffic congestion. The relationship between school facility with proximity was found in p value at  p=0,000 (p ≤ 0,05 . The relationship between shopping center facility with proximity was found in p value at  p= 0,020 (p ≤ 0,05. While, the relationship between proximity with congestion was p= 0,008 (p ≤ 0,05. Monastery school and Mega Mall activity were affecting congestion because a closer proximity of two facilities. This indicates that the occurence of traffic congestion in Monastery School  may be dependent on existence of  Piere Tendean road link

  18. E-shopping and its relationship with in-store shopping : empirical evidence from the Netherlands and the USA

    NARCIS (Netherlands)

    Farag, Sendy; Krizek, K.J.; Dijst, M.J.

    2006-01-01

    Despite considerable examination of the impact of telecommunications on travel, little empirical evidence sheds light on the impact of e-shopping on travel—a recent and increasingly popular form of telecommunications. This paper analyses determinants of online buying and their relationship with

  19. New learning arenas for shop stewards - a new political agenda for unions

    DEFF Research Database (Denmark)

    Warring, Niels

    . In the paper I will discuss results from a project involving shop stewards from four different unions, all members of LO (the confederation of trade unions for skilled and unskilled workers). We worked with different methods in the project ending with ‘future-creating workshops' where shop stewards...... in daily practices can be analysed us a combination of perspectives from different theoretical traditions. Shop steward's learning is situational, relational and cross-contextual. Shop stewards' learning is lifelong and life wide. And shop stewards' learning is closely connected to the development...... of the labour market and not least the unions' priorities, interpretation and reaction to this development....

  20. Online shopping behavior in offline retail stores : strategic value for companies?

    OpenAIRE

    Ferreira, José Pedro Santos

    2015-01-01

    In a world where e-tailing and traditional in-store shopping live together and complement each other in several shopping activities (Chu, et. al, 2010), little is known about the possibility of an emerging reality in which online and offline shopping merge into one single phenomenon. The purpose of this dissertation is to explore whether consumers are willing to engage in a shopping behavior inside retail stores in a way that is similar to the one they have when shopping online. Additionally,...

  1. Bench scale demonstration and conceptual engineering for DETOXSM catalyzed wet oxidation

    International Nuclear Information System (INIS)

    Moslander, J.; Bell, R.; Robertson, D.; Dhooge, P.; Goldblatt, S.

    1994-01-01

    Laboratory and bench scale studies of the DETOX SM catalyzed wet oxidation process have been performed with the object of developing the process for treatment of hazardous and mixed wastes. Reaction orders, apparent rates, and activation energies have been determined for a range of organic waste surrogates. Reaction intermediates and products have been analyzed. Metals' fates have been determined. Bench scale units have been designed, fabricated, and tested with solid and liquid organic waste surrogates. Results from the laboratory and bench scale studies have been used to develop conceptual designs for application of the process to hazardous and mixed wastes

  2. Effect of Fatigue Upon Performance and Electromyographic Activity in 6-RM Bench Press

    OpenAIRE

    van den Tillaar, Roland; Saeterbakken, Atle

    2014-01-01

    The aim of this study was to examine the effect of fatigue during one set of 6-RM bench pressing upon the muscle patterning and performance. Fourteen resistance-trained males (age 22.5±2.0 years, stature 1.82±0.07 m, body mass 82.0±7.8 kg) conducted a 6-RM bench press protocol. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, biceps brachii, triceps brachii, rectus abdominis, oblique external and erector spinae were measured in each repetition during the 6-RM bench p...

  3. Using bench press load to predict upper body exercise loads in physically active individuals.

    Science.gov (United States)

    Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

    2013-01-01

    This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p bench press load was a significant (R(2) range from 0.64 to 0.86, p Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.

  4. Cellular and Molecular Anesthesia: from Bench to Bedside

    Directory of Open Access Journals (Sweden)

    Ali Dabbagh

    2015-12-01

    Full Text Available Cellular and Molecular Anesthesia: from Bench to BedsideIn the current practice of anesthesia, each day, anesthesiologists deal with a great work: they use the cellular mechanisms of drug molecules to induce their desired effects for induction and maintenance of anesthesia to achieve appropriate tolerance of surgery and its pain, modulation of stress response, sedation needed for performing a variety of procedures, emergency anesthesia care, acute and chronic pain management or other everyday jobs of anesthesiologists during perioperative period.As a matter of fact, molecular anesthesia has been cited for more than 6 decades though in avery limited scale. In 1956, the molecular mechanisms of morphine and pethidine are described (1. Pauling in 1961 published an article in Science describing a molecular theorey for general anesthesia (2.In its report “the World in 2025”, Thomson Reuters has predicted clinical medicine would be the most active research front; while molecular biology has the 9th rank (3. But are we still practicing in clinic the same as today?In fact, the future trend of anesthesia is highly dependent on finding the novel cellular and molecular mechanisms and the possible interactions of the newly discovered molecules and inreraction mechanisms with organ systems. Today, we emphasize on the role of pharmacologists, physiologists, immunologists, anatomists, embryologists, geneticians, cellular medicine specialists, physicists and other basic science specialists; some very interesting examples are published in this volume of the Journal (4-7.However, changes that have well started now would “revolutionize” our daily practice during the next decade in such a way that it will change the basis of medicine: presumably we will have a new model medicine known as “personalized medicine” or “precision medicine”. In this approach, the content of each patient’s genes accompanied with his/her cellular and molecular analysis is

  5. INVESTIGATING THE COLLECTIVE ONLINE purchase PHENOMENON: FACTORS AFFECTING THE SHOPPING INTENSITY

    Directory of Open Access Journals (Sweden)

    Everton Roberto Comin

    2014-04-01

    Full Text Available The collective online shopping is a recent phenomenon in Brazil whose objective is to sell products and services for a minimum number of consumers. This study aims to investigate whether the intensity of collective online shopping is influenced by the aspects consumer interest in online collective shopping, impulse buying and insecurity. The data collection was based on a questionnaire with closed questions with multiple choices and a 5-point Likert scale.The final sample is composed of 143 respondents. Data was analyzed through the following statistic techniques: exploratory data analysis, exploratory factor analysis, reliability analysis, and logistic regression. The results suggest that people more interest in collective shopping are more likely to make collective shopping. People who feel greater insecurity in navigating the website is less likely to make collective shopping. It was observed that there is no a positive relationship between impulse shopping and collective purchasing. Some limitations include the number of constructs and sample characteristics.

  6. Relevance of air conditioning for 222Radon concentration in shops of the Savona Province, Italy

    International Nuclear Information System (INIS)

    Panatto, Donatella; Ferrari, Paola; Lai, Piero; Gallelli, Giovanni

    2006-01-01

    Radon ( 222 Rn) concentration was evaluated in shops of the Savona Province, Italy, between summer 2002 and winter 2002-2003. The main characteristics of each shops were recorded through a questionnaire investigating the ventilation rate and factors related to 222 Rn precursors in the soil and the construction materials. The main variables that were related to radon concentration were the following: age of the building, level of the shop above ground, season of the year, wind exposure, active windows, and type of heating system. Shops equipped with individual air heating/conditioning systems exhibited radon concentrations that were three times higher than those of shops heated by centralized furnaces. Our data indicate that the level of pollution in the shops was of medium level, with an expected low impact on the salespersons' health. Only in wintertime, the action level of 200 Bq m -3 for the confined environment was reached in 10 shops equipped with individual air heating/conditioning systems

  7. Oxygen-controlled Biosurfactant Production in a Bench Scale Bioreactor

    Science.gov (United States)

    de Kronemberger, Frederico Araujo; Anna, Lidia Maria Melo Santa; Fernandes, Ana Carolina Loureiro Brito; de Menezes, Reginaldo Ramos; Borges, Cristiano Piacsek; Freire, Denise Maria Guimarães

    Rhamnolipids have been pointed out as promising biosurfactants. The most studied microorganisms for the aerobic production of these molecules are the bacteria of the genus Pseudomonas. The aim of this work was to produce a rhamnolipid-type biosurfactant in a bench-scale bioreactor by one strain of Pseudomonas aeruginosa isolated from oil environments. To study the microorganism growth and production dependency on oxygen, a nondispersive oxygenation device was developed, and a programmable logic controller (PLC) was used to set the dissolved oxygen (DO) concentration. Using the data stored in a computer and the predetermined characteristics of the oxygenation device, it was possible to evaluate the oxygen uptake rate (OUR) and the specific OUR (SOUR) of this microorganism. These rates, obtained for some different DO concentrations, were then compared to the bacterial growth, to the carbon source consumption, and to the rhamnolipid and other virulence factors production. The SOUR presented an initial value of about 60.0 mg02/gdw h. Then, when the exponential growth phase begins, there is a rise in this rate. After that, the SOUR reduces to about 20.0 mg02/gdw h. The carbon source consumption is linear during the whole process.

  8. Pattern Generator for Bench Test of Digital Boards

    Science.gov (United States)

    Berkun, Andrew C.; Chu, Anhua J.

    2012-01-01

    All efforts to develop electronic equipment reach a stage where they need a board test station for each board. The SMAP digital system consists of three board types that interact with each other using interfaces with critical timing. Each board needs to be tested individually before combining into the integrated digital electronics system. Each board needs critical timing signals from the others to be able to operate. A bench test system was developed to support test of each board. The test system produces all the outputs of the control and timing unit, and is delivered much earlier than the timing unit. Timing signals are treated as data. A large file is generated containing the state of every timing signal at any instant. This file is streamed out to an IO card, which is wired directly to the device-under-test (DUT) input pins. This provides a flexible test environment that can be adapted to any of the boards required to test in a standalone configuration. The problem of generating the critical timing signals is then transferred from a hardware problem to a software problem where it is more easily dealt with.

  9. The "sticking period" in a maximum bench press.

    Science.gov (United States)

    van den Tillaar, Roland; Ettema, Gertjan

    2010-03-01

    The purpose of this study was to examine muscle activity and three-dimensional kinematics in the ascending phase of a successful one-repetition maximum attempt in bench press for 12 recreational weight-training athletes, with special attention to the sticking period. The sticking period was defined as the first period of deceleration of the upward movement (i.e. from the highest barbell velocity until the first local lowest barbell velocity). All participants showed a sticking period during the upward movement that started about 0.2 s after the initial upward movement, and lasted about 0.9 s. Electromyography revealed that the muscle activity of the prime movers changed significantly from the pre-sticking to the sticking and post-sticking periods. A possible mechanism for the existence of the sticking period is the diminishing potentiation of the contractile elements during the upward movement together with the limited activity of the pectoral and deltoid muscles during this period.

  10. Surfactant from neonatal to pediatric ICU: bench and bedside evidence.

    Science.gov (United States)

    Boet, A; Brat, R; Aguilera, S S; Tissieres, P; De Luca, D

    2014-12-01

    Surfactant is a cornerstone of neonatal critical care for the treatment of respiratory distress syndrome of preterm babies. However, other indications have been studied for various clinical conditions both in term neonates and in children beyond neonatal age. A high degree of evidence is not yet available in some cases and this is due to the complex and not yet totally understood physiopathology of the different types of pediatric and neonatal lung injury. We here summarise the state of the art of the bench and bedside knowledge about surfactant use for the respiratory conditions usually cared for in neonatal and pediatric intensive care units. Future research direction will also be presented. On the whole, surfactant is able to improve oxygenation in infection related respiratory failure, pulmonary hemorrhage and meconium aspiration syndrome. Bronchoalveolar lavage with surfactant solution is currently the only means to reduce mortality or need for extracorporeal life support in neonates with meconium aspiration. While surfactant bolus or lavage only improves the oxygenation and ventilatory requirements in other types of postneonatal acute respiratory distress syndrome (ARDS), there seems to be a reduction in the mortality of small infants with RSV-related ARDS.

  11. Mechanisms of Inflammation in Proliferative Vitreoretinopathy: From Bench to Bedside

    Directory of Open Access Journals (Sweden)

    Stavros N. Moysidis

    2012-01-01

    Full Text Available Proliferative vitreoretinopathy (PVR is a vision-threatening disease and a common complication of surgery to correct rhegmatogenous retinal detachment (RRD. Several models of the pathogenesis of this disease have been described with some of these models focusing on the role of inflammatory cells and other models focusing on the role of growth factors and cytokines in the vitreous which come into contact with intraretinal and retinal pigment epithelial cells. New experiments have shed light on the pathogenesis of PVR and offer promising avenues for clinical intervention before PVR develops. One such target is the indirect pathway of activation of platelet-derived growth factor receptor alpha (PDGRα, which plays an important role in PVR. Clinical trials assessing the efficacy of 5-fluorouracil (5-FU and low-molecular-weight heparin (LMWH, daunorubicin, and 13-cis-retinoic acid, among other therapies, have yielded mixed results. Here we review inflammatory and other mechanisms involved in the pathogenesis of PVR, we highlight important clinical trials, and we discuss how findings at the bench have the potential to be translated to the bedside.

  12. A bench-scale biotreatability methodology to evaluate field bioremediation

    International Nuclear Information System (INIS)

    Saberiyan, A.G.; MacPherson, J.R. Jr.; Moore, R.; Pruess, A.J.; Andrilenas, J.S.

    1995-01-01

    A bench-scale biotreatability methodology was designed to assess field bioremediation of petroleum contaminated soil samples. This methodology was performed successfully on soil samples from more than 40 sites. The methodology is composed of two phases, characterization and experimentation. The first phase is physical, chemical, and biological characterization of the contaminated soil sample. This phase determines soil parameters, contaminant type, presence of indigenous contaminant-degrading bacteria, and bacterial population size. The second phase, experimentation, consists of a respirometry test to measure the growth of microbes indirectly (via generation of CO 2 ) and the consumption of their food source directly (via contaminant loss). Based on a Monod kinetic analysis, the half-life of a contaminant can be calculated. Abiotic losses are accounted for based on a control test. The contaminant molecular structure is used to generate a stoichiometric equation. The stoichiometric equation yields a theoretical ratio for mg of contaminant degraded per mg of CO 2 produced. Data collected from the respirometry test are compared to theoretical values to evaluate bioremediation feasibility

  13. Effect of different pushing speeds on bench press.

    Science.gov (United States)

    Padulo, J; Mignogna, P; Mignardi, S; Tonni, F; D'Ottavio, S

    2012-05-01

    The purpose of this study was to investigate the effect on muscular strength after a 3-week training with the bench-press at a fixed pushing of 80-100% maximal speed (FPS) and self-selected pushing speed (SPS). 20 resistance-trained subjects were divided at random in 2 groups differing only regarding the pushing speed: in the FPS group (n=10) it was equal to 80-100% of the maximal speed while in the SPS group (n=10) the pushing speed was self-selected. Both groups were trained twice a week for 3 weeks with a load equal to 85% of 1RM and monitored with the encoder. Before and after the training we measured pushing speed and maximum load. Significant differences between and within the 2 groups were pointed out using a 2-way ANOVA for repeated measures. After 3 weeks a significant improvement was shown especially in the FPS group: the maximum load improved by 10.20% and the maximal speed by 2.22%, while in the SPS group the effect was <1%. This study shows that a high velocity training is required to increase the muscle strength further in subjects with a long training experience and this is possible by measuring the individual performance speed for each load. © Georg Thieme Verlag KG Stuttgart · New York.

  14. A high frequency test bench for rapid single-flux-quantum circuits

    International Nuclear Information System (INIS)

    Engseth, H; Intiso, S; Rafique, M R; Tolkacheva, E; Kidiyarova-Shevchenko, A

    2006-01-01

    We have designed and experimentally verified a test bench for high frequency testing of rapid single-flux-quantum (RSFQ) circuits. This test bench uses an external tunable clock signal that is stable in amplitude, phase and frequency. The high frequency external clock reads out the clock pattern stored in a long shift register. The clock pattern is consequently shifted out at high speed and split to feed both the circuit under test and an additional shift register in the test bench for later verification at low speed. This method can be employed for reliable high speed verification of RSFQ circuit operation, with use of only low speed read-out electronics. The test bench consists of 158 Josephson junctions and the occupied area is 3300 x 660 μm 2 . It was experimentally verified up to 33 GHz with ± 21.7% margins on the global bias supply current

  15. Rhode Island Flood Plain Management Services; Bench & Reference Mark Catalogue Portsmouth, Newport and Warwick, Rhode Island

    National Research Council Canada - National Science Library

    Hatfield, Christopher

    1994-01-01

    This study, which developed a catalog of bench and reference marks for several communities in Rhode Island, was conducted by the Long Range Planning Branch, Planning Directorate, New England Division, U.S...

  16. Bench press training program with attached chains for female volleyball and basketball athletes.

    Science.gov (United States)

    Burnham, Timothy R; Ruud, Jason D; McGowan, Robert

    2010-02-01

    Attaching chains to barbells to increase strength and power has become popular for athletes; however, little scientific evidence supports this practice. The present purpose was to compare chain training to traditional training for the bench press. Women collegiate athletes in volleyball and basketball (N = 19) participated in a 16-session bench press program. They were matched into either a Traditional or a Chain training group by 1-repetition maximum (1RM). The Traditional group performed the bench press with conventional equipment, while the Chain group trained with attached chains (5% of weight). Analysis showed a significant increase in 1RM for both groups over 16 sessions, Traditional +11.8% and Chain +17.4%. The difference between the groups was not statistically significant, but suggests the women who trained with attached chains improved their bench press more than the Traditional group.

  17. System of Thermal Balance Maintenance in Modern Test Benches for Centrifugal Pumps

    Directory of Open Access Journals (Sweden)

    A. I. Petrov

    2015-01-01

    Full Text Available The article “Systems of the heat balance maintenance in modern test benches for centrifugal pumps” makes the case to include cooling systems of a working fluid (heat setting in test bench for impeller pumps. It briefly summarizes an experience of bench building to test centrifugal pumps, developed at the BMSTU Department E-10 over the last 10 years. The article gives the formulas and the algorithm to calculate the heat capacity of different types of impeller pumps when tested at the bench as ell as to determine the heating time of the liquid in the bench without external cooling. Based on analysis of the power balance of a centrifugal pump, it is shown that about 90% of the pump unit-consumed electric power in terminals is used for heating up the working fluid in the loop of the test bench. The article gives examples of elementary heat calculation of the pump operation within the test bench. It presents the main types of systems to maintain thermal balance, their advantages, disadvantages and possible applications. The cooling system schemes for open and closed version of the benches both with built-in and with an independent cooling circuit are analysed. The paper separately considers options of such systems for large benches using the cooling tower as a cooling device in the loop, and to test the pumps using the hydraulic fluids other than water, including those at high temperatures of working fluids; in the latter case a diagram of dual-circuit cooling system "liquid-liquid-air" is shown. The paper depicts a necessity to use ethylene glycol coolant in the two-loop cooling bench. It provides an example of combining the functions of cooling and filtration in a single cooling circuit. Criteria for effectiveness of these systems are stated. Possible ways for developing systems to maintain a thermal balance, modern methods of regulation and control are described. In particular, the paper shows the efficiency of frequency control of the

  18. Errors of car wheels rotation rate measurement using roller follower on test benches

    Science.gov (United States)

    Potapov, A. S.; Svirbutovich, O. A.; Krivtsov, S. N.

    2018-03-01

    The article deals with rotation rate measurement errors, which depend on the motor vehicle rate, on the roller, test benches. Monitoring of the vehicle performance under operating conditions is performed on roller test benches. Roller test benches are not flawless. They have some drawbacks affecting the accuracy of vehicle performance monitoring. Increase in basic velocity of the vehicle requires increase in accuracy of wheel rotation rate monitoring. It determines the degree of accuracy of mode identification for a wheel of the tested vehicle. To ensure measurement accuracy for rotation velocity of rollers is not an issue. The problem arises when measuring rotation velocity of a car wheel. The higher the rotation velocity of the wheel is, the lower the accuracy of measurement is. At present, wheel rotation frequency monitoring on roller test benches is carried out by following-up systems. Their sensors are rollers following wheel rotation. The rollers of the system are not kinematically linked to supporting rollers of the test bench. The roller follower is forced against the wheels of the tested vehicle by means of a spring-lever mechanism. Experience of the test bench equipment operation has shown that measurement accuracy is satisfactory at small rates of vehicles diagnosed on roller test benches. With a rising diagnostics rate, rotation velocity measurement errors occur in both braking and pulling modes because a roller spins about a tire tread. The paper shows oscillograms of changes in wheel rotation velocity and rotation velocity measurement system’s signals when testing a vehicle on roller test benches at specified rates.

  19. Low-load bench press and push-up induce similar muscle hypertrophy and strength gain.

    Science.gov (United States)

    Kikuchi, Naoki; Nakazato, Koichi

    2017-06-01

    To investigate the effect of push-up training with a similar load of to 40% of 1- repetition maximumal (1RM) bench press on muscle hypertrophy and strength gain in men. Eighteen male participants (age, 20.2 ± 0.73 years, range: 19-22 years, height: 169.8 ± 4.4 cm, weight: 64.5 ± 4.7 kg) were randomly assigned to one of two experimental groups: bench press at 40%1RM (bench-press group, n = 9) or push-ups with position adjusted (e.g. kneeling) to the same load of bench-press 40%1RM (push-up group, n = 9), performed twice per week for 8 weeks. Muscle thickness at three sites (biceps, triceps, and pectoralis major), bench-press 1RM, maximum repetition at 40%1RM, and power output (medicine ball throw) were measured before and after the training period. Significant increases in 1RM and muscle thickness (triceps and pectoralis major) were observed in bench-press group (1RM, from 60.0 ± 12.1 kg to 65.0 ± 12.1 kg, p bench-press group (28.4 ± 3.3 mm to 31.5 ± 3.7 mm, p bench press is comparably effective for muscle hypertrophy and strength gain over an 8-week training period.

  20. TACLeBench: A benchmark collection to support worst-case execution time research

    DEFF Research Database (Denmark)

    Falk, Heiko; Altmeyer, Sebastian; Hellinckx, Peter

    2016-01-01

    -source programs, adapted them to a common coding style, and provide the collection in open-source. The benchmark collection is called TACLeBench and is available from GitHub in version 1.9 at the publication date of this paper. One of the main features of TACLeBench is that all programs are self-contained without...... any dependencies on standard libraries or an operating system....

  1. Flow shop scheduling algorithm to optimize warehouse activities

    Directory of Open Access Journals (Sweden)

    P. Centobelli

    2016-01-01

    Full Text Available Successful flow-shop scheduling outlines a more rapid and efficient process of order fulfilment in warehouse activities. Indeed the way and the speed of order processing and, in particular, the operations concerning materials handling between the upper stocking area and a lower forward picking one must be optimized. The two activities, drops and pickings, have considerable impact on important performance parameters for Supply Chain wholesaler companies. In this paper, a new flow shop scheduling algorithm is formulated in order to process a greater number of orders by replacing the FIFO logic for the drops activities of a wholesaler company on a daily basis. The System Dynamics modelling and simulation have been used to simulate the actual scenario and the output solutions. Finally, a t-Student test validates the modelled algorithm, granting that it can be used for all wholesalers based on drop and picking activities.

  2. CERN SHOP - CHRISTMAS SALE - 11-12.12.2002

    CERN Multimedia

    Visits & Exhibition Service

    2002-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Wednesday 11 to Thursday 12 December from 10.30 to 16.00. CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt,(M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Blue silk tie 15.- Fancy silk tie (blue, bordeau) 20.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- Swiss Duo Pack with CERN logo 30.- CERN watch 20.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'Particle Odyssey' (English) 60.- Book 'How the web was born' (English, Italian) 30.- The Search for Infinity (French, Italian, English, German)  40.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.00 hrs. Visits & Exhibition Service/ETT-VE

  3. Simulation of the shopping center 'Zona I' evacuation

    Directory of Open Access Journals (Sweden)

    Jevtić Radoje B.

    2014-01-01

    Full Text Available One of the most important and the most complex tasks in human protection and human safety in objects is the projecting of the object evacuation. There are many factors that could effect on the opportune living of object such as object assignment, arrangement of rooms, arrangement of furniture, arrangement of exits, occupant speed and many other that human lives and material properties depend on. This is very important for objects with great number of humans, such as high residential objects, shopping centers, schools, hospitals etc. This paper has written to show the possible evacuation situations and calculate minimal time for evacuation in case of the shopping center 'Zona I' in Niš.

  4. CERN Shop - Christmas Sale 15-17.12.2003

    CERN Multimedia

    2003-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand: in Meyrin, Main Building, ground floor, from Monday 15 to Wednesday 17 December from 10:30 to 16:00 hrs. CERN Sweat-shirts (M, L, XL) 30.- CERN T-shirt, (M, L, XL) 20.- CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 20.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- Swiss Duo Pack with CERN logo 30.- CERN/Atlas watch 40.- CERN baseball cap 15.- CERN briefcase 15,- Mouse mat 10,- CERN Calendar 5,- Books: - "Antimatter" (English) 35.- - "How the web was born" (English, Italian) 30,- - "The Search for Infinity" (French, Italian, English, German) 40.- - "World of Particles/le monde de particules" 6,- - "Facts and Mysteries" (English) 28,- - "Nucleus" (English) 50,- If you miss this special occasion, the articles are also available at the Reception Shop in Buildin...

  5. Factors Influencing Consumer Behavior Towards Online Shopping in Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Hani A

    2015-08-01

    Full Text Available This study intends to identify factors that may affect consumer behavior in Saudi Arabia while shopping online. Although Saudi Arabia has the largest and fastest growing ICT in the Middle East and the online shopping activities in Saudi are increasing rapidly, it is still lagging behind the global development. The four factors–website design quality, perceived trust, perceived convenience and advertisements & promotions were selected from the available literature. A survey was conducted and questionnaire that includes 25 questions was distributed randomly to a sample of 107 participants in Dammam city (in the Eastern Province of the kingdom. The collected data was analyzed by using SPSS software. The result indicates one hypothesis has been accepted. The findings of the study are analyzed and discussed further at the end of this paper.

  6. Doctor-Shopping Behavior among Patients with Eye Floaters

    Directory of Open Access Journals (Sweden)

    Gow-Lieng Tseng

    2015-07-01

    Full Text Available Patients suffering from eye floaters often resort to consulting more than one ophthalmologist. The purpose of this study, using the Health Belief Model (HBM, was to identify the factors that influence doctor-shopping behavior among patients with eye floaters. In this cross-sectional survey, 175 outpatients who presented floaters symptoms were enrolled. Data from 143 patients (77 first time visitors and 66 doctor-shoppers who completed the questionnaire were analyzed. Descriptive and logistic regression analyses were performed. We found that women and non-myopia patients were significantly related with frequent attendance and doctor switching. Though the HBM has performed well in a number of health behaviors studies, but most of the conceptual constructors of HBM did not show significant differences between the first time visitors and true doctor-shoppers in this study. Motivation was the only significant category affecting doctor-shopping behavior of patients with eye floaters.

  7. Doctor-Shopping Behavior among Patients with Eye Floaters.

    Science.gov (United States)

    Tseng, Gow-Lieng; Chen, Cheng-Yu

    2015-07-13

    Patients suffering from eye floaters often resort to consulting more than one ophthalmologist. The purpose of this study, using the Health Belief Model (HBM), was to identify the factors that influence doctor-shopping behavior among patients with eye floaters. In this cross-sectional survey, 175 outpatients who presented floaters symptoms were enrolled. Data from 143 patients (77 first time visitors and 66 doctor-shoppers) who completed the questionnaire were analyzed. Descriptive and logistic regression analyses were performed. We found that women and non-myopia patients were significantly related with frequent attendance and doctor switching. Though the HBM has performed well in a number of health behaviors studies, but most of the conceptual constructors of HBM did not show significant differences between the first time visitors and true doctor-shoppers in this study. Motivation was the only significant category affecting doctor-shopping behavior of patients with eye floaters.

  8. Simulation of Induction Traction Drive with Supercapacitor Energy Storage System Test Bench

    Directory of Open Access Journals (Sweden)

    Stana Girts

    2015-12-01

    Full Text Available The paper describes the application of supercapacitor energy storage system for induction traction drive test bench that replaces a real electric public transport for performing testing and researches. The suitability and usage of such bench for research purposes is explained and the importance of the development of software mathematical model for performing simulations to be done before physical implementation measures is reasoned. The working principle of the bench and applied components are described. A virtual model of the bench was built and simulations were performed using Matlab/Simulink software. The basic topology of the virtual bench model is described as well. The calculations of this work show the scaling of supercapacitor energy storage system by setting different limits of working voltage range in order to adjust them to test bench parameters, whereas the modelling compares two simulation cases – the application of less supercapacitors and the application of more supercapacitors with the same common rated voltage. The autonomous mode simulations were also performed. Simulation results are analyzed and recommendations for the application of the supercapacitor energy storage system, with respect to initial supercapacitor circuit voltage, are given.

  9. Effect of Fatigue Upon Performance and Electromyographic Activity in 6-RM Bench Press.

    Science.gov (United States)

    van den Tillaar, Roland; Saeterbakken, Atle

    2014-03-27

    The aim of this study was to examine the effect of fatigue during one set of 6-RM bench pressing upon the muscle patterning and performance. Fourteen resistance-trained males (age 22.5±2.0 years, stature 1.82±0.07 m, body mass 82.0±7.8 kg) conducted a 6-RM bench press protocol. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, biceps brachii, triceps brachii, rectus abdominis, oblique external and erector spinae were measured in each repetition during the 6-RM bench press. Total lifting time increased and the velocity in the ascending movement decreased (p≤0.001). However, the kinematics in the descending phase deferred: the time decreased and velocity increased during the 6-RM (p≤0.001). Generally, muscles increased their EMG amplitude during the six repetitions in the ascending movement, while only three of the seven measured muscles showed an increase over the six repetitions in the descending part in 6-RM bench pressing. It was concluded that the bench pressing performance decreased (lower barbell velocities and longer lifting times) with increasing fatigue in the 6-RM execution. Furthermore EMG increased in the prime movers and the trunk stabilizers (abdominal and spine), while the antagonist muscle (biceps) activity was not affected by fatigue during the lifting phase in a single set of 6-RM bench pressing.

  10. Location of Instability During a Bench Press Alters Movement Patterns and Electromyographical Activity.

    Science.gov (United States)

    Nairn, Brian C; Sutherland, Chad A; Drake, Janessa D M

    2015-11-01

    Instability training devices with the bench press exercise are becoming increasingly popular. Typically, the instability device is placed at the trunk/upper body (e.g., lying on a Swiss ball); however, a recent product called the Attitube has been developed, which places the location of instability at the hands by users lifting a water-filled tube. Therefore, the purpose of this study was to analyze the effects of different instability devices (location of instability) on kinematic and electromyographical patterns during the bench press exercise. Ten healthy males were recruited and performed 1 set of 3 repetitions for 3 different bench press conditions: Olympic bar on a stable bench (BENCH), Olympic bar on a stability ball (BALL), and Attitube on a stable bench (TUBE). The eccentric and concentric phases were analyzed in 10% intervals while electromyography was recorded from 24 electrode sites, and motion capture was used to track elbow flexion angle and 3-dimensional movement trajectories and vertical velocity of the Bar/Attitube. The prime movers tended to show a reduction in muscle activity during the TUBE trials; however, pectoralis major initially showed increased activation during the eccentric phase of the TUBE condition. The trunk muscle activations were greatest during the TUBE and smallest during the BAR. In addition, the TUBE showed decreased range of elbow flexion and increased medial-lateral movement of the Attitube itself. The results further support the notion that instability devices may be more beneficial for trunk muscles rather than prime movers.

  11. Contextual interference effects on the acquisition of skill and strength of the bench press.

    Science.gov (United States)

    Naimo, Marshall A; Zourdos, Michael C; Wilson, Jacob M; Kim, Jeong-Su; Ward, Emery G; Eccles, David W; Panton, Lynn B

    2013-06-01

    The purpose of this study was to investigate contextual interference effects on skill acquisition and strength gains during the learning of the bench press movement. Twenty-four healthy, college-aged males and females were stratified to control, high contextual interference (HCI), and low contextual interference (LCI) groups. Treatment groups were provided with written and visual instruction on proper bench press form and practiced the bench press and dart throwing for four weeks. Within each session, LCI performed all bench press sets before undertaking dart-throws. HCI undertook dart-throws immediately following each set of bench press. Control only did testing. Measurements, including one repetition maximum (1RM), checklist scores based on video recordings of participants' 1RM's, and dart-throw test scores were taken at pre-test, 1 week, 2 week, post-test, and retention test. Results were consistent with the basic premise of the contextual interference effect. LCI had significant improvements in percent 1RM and checklist scores during training, but were mostly absent after training (post-test and retention test). HCI had significant improvements in percent 1RM and checklist scores both during and after training. Thus, HCI may augment strength and movement skill on the bench press since proper technique is an important component of resistance exercise movements. Copyright © 2013 Elsevier B.V. All rights reserved.

  12. Flow-shop scheduling problem under uncertainties: Review and trends

    OpenAIRE

    Eliana María González-Neira; Jairo R. Montoya-Torres; David Barrera

    2017-01-01

    Among the different tasks in production logistics, job scheduling is one of the most important at the operational decision-making level to enable organizations to achieve competiveness. Scheduling consists in the allocation of limited resources to activities over time in order to achieve one or more optimization objectives. Flow-shop (FS) scheduling problems encompass the sequencing processes in environments in which the activities or operations are performed in a serial flow. This type of co...

  13. Supermarket Choice, Shopping Behavior, Socioeconomic Status, and Food Purchases.

    Science.gov (United States)

    Pechey, Rachel; Monsivais, Pablo

    2015-12-01

    Both SES and supermarket choice have been associated with diet quality. This study aimed to assess the contributions of supermarket choice and shopping behaviors to the healthfulness of purchases and social patterning in purchases. Observational panel data on purchases of fruit and vegetables and less-healthy foods/beverages from 2010 were obtained for 24,879 households, stratified by occupational social class (analyzed in 2014). Households' supermarket choice was determined by whether they ever visited market-defined high- or low-price supermarkets. Analyses also explored extent of use within supermarket choice groups. Shopping behaviors included trip frequency, trip size, and number of store chains visited. Households using low-price (and not high-price) supermarkets purchased significantly lower percentages of energy from fruit and vegetables and higher percentages of energy from less-healthy foods/beverages than households using high-price (and not low-price) supermarkets. When controlling for SES and shopping behaviors, the effect of supermarket choice was reduced but remained significant for both fruit and vegetables and less-healthy foods/beverages. The extent of use of low- or high-price supermarkets had limited effects on outcomes. More-frequent trips and fewer small trips were associated with healthier purchasing for both outcomes; visiting more store chains was associated with higher percentages of energy from fruit and vegetables. Although both supermarket choice and shopping behaviors are associated with healthfulness of purchases, neither appears to contribute to socioeconomic differences. Moreover, differences between supermarket environments may not be primary drivers of the relationship between supermarket choice and healthfulness of purchases. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  14. Hepatic volumetry with PhotoShop in personal computer.

    Science.gov (United States)

    Lu, Yi; Wu, Zheng; Liu, Chang; Wang, Hao-Hua

    2004-02-01

    Convenient way to clarify liver volume or tumor volume in the liver is eagerly demanded by hepatobiliary surgeons, for so many aspects of clinical work need to know the liver volumetry. At present, some methods have been used to measure the liver volumetry, such as computed tomography (CT) scans, three-dimensional ultrasound volumetric system([1]) and 3-dimensional sonography([2,3]) et al. But enough volumetric information was failed to obtain by surgeons and a new way of measuring the liver volumetry that can be operated by themselves is exigent. Whereas we devise a new method of using PhotoShop in personal computer to measure the liver volumetry. A piece of whole CT film was transformed to a high quality digitized image by digital camera or scanner and then the digitized image was conducted as JPEG file into personal computer. The JPEG image file of CT film was opened by PhotoShop. Determining the edge of interested areas, and the data of pixel values of the interested areas divided by 1 cm2 pixel value will produce the actual area with the unit of square centimeter. If section thickness of CT scan is 1 cm, the sum of the areas of the liver or tumor in all sections naturally is the volume of the liver or tumor. Comparison of 10 hepatic volumes gained by this method and those gained by the GE Prospeed CT set showed a good relativity between the two groups. The volumes of three right lobes were calculated by this method before lobectomy and their real volumes were obtained postoperatively by a volumenometer. Their variation was limited to 5%. Hepatic volume obtained by PhotoShop is reliable. This method can be used to measure hepatic volume perfectly to meet clinical demand, and many parameters such as liver resection rate, graft volume can be achieved. The disadvantage of this method is the step of copying the pixel value from PhotoShop to Microsoft Excel.

  15. Optimal Results and Numerical Simulations for Flow Shop Scheduling Problems

    Directory of Open Access Journals (Sweden)

    Tao Ren

    2012-01-01

    Full Text Available This paper considers the m-machine flow shop problem with two objectives: makespan with release dates and total quadratic completion time, respectively. For Fm|rj|Cmax, we prove the asymptotic optimality for any dense scheduling when the problem scale is large enough. For Fm‖ΣCj2, improvement strategy with local search is presented to promote the performance of the classical SPT heuristic. At the end of the paper, simulations show the effectiveness of the improvement strategy.

  16. How to Reduce Customer Struggles in Online Shopping in China

    OpenAIRE

    Wang, Fan

    2012-01-01

    This paper attempts to provide efficient approaches on reducing customer struggles in online shopping. It appears that online retailing in China needs more improvements based on the customer-centred perspective. Customer struggles relate to physical and psychological flounders, such as unqualified products, unsatisfied services, loss of money and information leakage. Factors that affect customer struggles online include price, diversity of products, quality of items, quality of services, and ...

  17. CONSUMER’S EMOTIONAL INFLUENCE & VISUAL MERCHANDISING EFFECTS: SHOPPING MALLS

    OpenAIRE

    Ranjan Upadhyaya; Govind Nath Srivastava

    2013-01-01

    The research empirically examines the impact of emotional influence in evaluation and purchase decision with special reference to goods sold in shopping malls. Various factors which influence the consumer decision, such as ease offered by retailer to customers in defining, selecting and purchasing the product, brand value, utility of the product, reference group, value for money, advertising and its appeal etc are being critically analyzed and its impact is being em...

  18. One-stop shopping in Africa's minerals supermarket

    International Nuclear Information System (INIS)

    Spira, J.

    1980-01-01

    Johannesburg in South Africa is one of the minerals capitals of the world, providing a one-stop shopping supermarket for the most sought-after strategic minerals. Total annual mineral sales grew from R1563 million in 1970 to R6876 million in 1978. For 1979 the figure exceeded R9700 million. Production, trade and marketing of gold, coal, platinum, uranium, diamonds, iron ore, copper, antimony, mineral sands, asbestos and vanadium are shortly discussed

  19. A virtual shopping test for realistic assessment of cognitive function.

    Science.gov (United States)

    Okahashi, Sayaka; Seki, Keiko; Nagano, Akinori; Luo, Zhiwei; Kojima, Maki; Futaki, Toshiko

    2013-06-18

    Cognitive dysfunction caused by brain injury often prevents a patient from achieving a healthy and high quality of life. By now, each cognitive function is assessed precisely by neuropsychological tests. However, it is also important to provide an overall assessment of the patients' ability in their everyday life. We have developed a Virtual Shopping Test (VST) using virtual reality technology. The objective of this study was to clarify 1) the significance of VST by comparing VST with other conventional tests, 2) the applicability of VST to brain-damaged patients, and 3) the performance of VST in relation to age differences. The participants included 10 patients with brain damage, 10 age-matched healthy subjects for controls, 10 old healthy subjects, and 10 young healthy subjects. VST and neuropsychological tests/questionnaires about attention, memory and executive function were conducted on the patients, while VST and the Mini-Mental State Examination (MMSE) were conducted on the controls and healthy subjects. Within the VST, the participants were asked to buy four items in the virtual shopping mall quickly in a rational way. The score for evaluation included the number of items bought correctly, the number of times to refer to hints, the number of movements between shops, and the total time spent to complete the shopping. Some variables on VST correlated with the scores of conventional assessment about attention and everyday memory. The mean number of times referring to hints and the mean number of movements were significantly larger for the patients with brain damage, and the mean total time was significantly longer for the patients than for the controls. In addition, the mean total time was significantly longer for the old than for the young. The results suggest that VST is able to evaluate the ability of attention and everyday memory in patients with brain damage. The time of VST is increased by age.

  20. At-Risk/Problematic Shopping and Gambling in Adolescence.

    Science.gov (United States)

    Yip, Sarah W; Mei, Songli; Pilver, Corey E; Steinberg, Marvin A; Rugle, Loreen J; Krishnan-Sarin, Suchitra; Hoff, Rani A; Potenza, Marc N

    2015-12-01

    Elevated levels of both pathological gambling (PG) and problem shopping (PS) have been reported among adolescents, and each is associated with a range of other negative health/functioning measures. However, relationships between PS and PG, particularly during adolescence, are not well understood. In this study, we explored the relationship between different levels of problem-gambling severity and health/functioning characteristics, gambling-related social experiences, gambling behaviors and motivations among adolescents with and without at-risk/problematic shopping (ARPS). Survey data from Connecticut high school students (n = 2,100) were analyzed using bivariate analyses and logistic regression modeling. Although at-risk/problematic gambling (ARPG) was not increased among adolescents with ARPS, adolescents with ARPG (vs non-gamblers) were more likely to report having experienced a growing tension or anxiety that could only be relieved by shopping and missing other obligations due to shopping. In comparison to the non-ARPS group, a smaller proportion of respondents in the ARPS group reported paid part-time employment, whereas a greater proportion of respondents reported excessive gambling by peers and feeling concerned over the gambling of a close family member. In general, similar associations between problem-gambling severity and measures of health/functioning and gambling-related behaviors and motivations were observed across ARPS and non-ARPS adolescents. However, associations were weaker among ARPS adolescents for several variables: engagement in extracurricular activities, alcohol and caffeine use and gambling for financial reasons. These findings suggest a complex relationship between problem-gambling severity and ARPS. They highlight the importance of considering co-occurring risk behaviors such as ARPS when treating adolescents with at-risk/problem gambling.

  1. Students’ online purchasing behavior in Malaysia: Understanding online shopping attitude

    OpenAIRE

    Marzieh Zendehdel; Laily Hj Paim; Syuhaily Bint Osman

    2015-01-01

    Studies examining the factors that affect the online purchasing behavior of consumers are rare, despite the prospective advance of e-commerce in Malaysia. The present study examines particular factors that influence the attitude of potential consumers to purchase online by using the attributes from the diffusion of innovations theory of Rogers, the attribute of perception of risk, and the subjective norms toward online purchasing. Consumers’ perceived risks of online shopping have become a vi...

  2. Online Shopping With Spoofing Detection Using Web and Mobile Application

    OpenAIRE

    M.Poovizhi; K.Karthika; S.Nandhini; Dr.P.Gomathi

    2018-01-01

    Abstract— E-commerce is that the shopping for marketing of products and services, or the sending of funds or knowledge, over a web and straightforward access to immense stores of reference material, email, and new avenues for advertising and data distribution, to call some. Like most technological advances, there conjointly another side: criminal hackers. Governments, companies, and personal voters round the world area unit anxious to be an area of this revolution, however, they are afraid th...

  3. Business Plan a Vietnamese Coffee Shop in Helsinki

    OpenAIRE

    Do Tu, Linh

    2017-01-01

    Nowadays, economy is more and more developing. In consequence, startups have become a trend. Nonetheless, starting an own business is not an easy task, and become an entrepreneur also require many skills. Planning a business plan is a vital process. The number of Vietnamese people and Asian people is now increasing in the Finnish society. Therefore, opening a Vietnamese coffee shop is the extraordinarily step that will help not only the author approach the economy evolutio...

  4. Outpatient-shopping behavior and survival rates in newly diagnosed cancer patients.

    Science.gov (United States)

    Chiou, Shang-Jyh; Wang, Shiow-Ing; Liu, Chien-Hsiang; Yaung, Chih-Liang

    2012-09-01

    To evaluate the appropriateness of the definition of outpatient-shopping behavior in Taiwanese patients. Linked study of 3 databases (Taiwan Cancer Registry, National Health Insurance [NHI] claim database, and death registry database). Outpatient shopping behavior was defined as making at least 4 or 5 physician visits to confirm a cancer diagnosis. We analyzed patient-related factors and the 5-year overall survival rate of the outpatient-shopping group compared with a nonshopping group. Using the household registration database and NHI database, we determined the proportion of outpatient shopping, characteristics of patients who did and did not shop for outpatient therapy, time between diagnosis and start of regular treatment, and medical service utilization in the shopping versus the nonshopping group. Patients with higher incomes were significantly more likely to shop for outpatient care. Patients with higher comorbidity scores were 1.4 times more likely to shop for outpatient care than patients with lower scores. Patients diagnosed with more advanced cancer were more likely to shop than those who were not. Patients might be more trusting of cancer diagnoses given at higher-level hospitals. The nonshopping groups had a longer duration of survival over 5 years. Health authorities should consider charging additional fees after a specific outpatient- shopping threshold is reached to reduce this behavior. The government may need to reassess the function of the medical sources network by shrinking it from the original 4 levels to 2 levels, or by enhancing the referral function among different hospital levels.

  5. Understanding safety climate in small automobile collision repair shops.

    Science.gov (United States)

    Parker, David L; Brosseau, Lisa M; Bejan, Anca; Skan, Maryellen; Xi, Min

    2014-01-01

    In the United States, approximately 236,000 people work in 37,600 auto collision-repair businesses. Workers in the collision-repair industry may be exposed to a wide range of physical and chemical hazards. This manuscript examines the relationship of safety climate as reported by collision repair shop workers and owners to: (1) an independent business safety assessment, and (2) employee self-reported work practices. The study was conducted in the Twin Cities metropolitan area. A total of 199 workers from 49 collision shops completed a survey of self-reported work practices and safety climate. Surveys were completed by an owner or manager in all but three shops. In general, self-reported work practices were poor. Workers' scores on safety climate were uniformly lower than those of owners. For workers, there was no correlation between how well the business scored on an independent audit of business safety practices and the safety climate measures they reported. For owners, however, there was a positive correlation between safety climate scores and the business safety assessment. For workers, safety rules and procedures were associated with improved work practices for those engaged in both painting-related and body technician-related activities. The enforcement of safety rules and procedures emerged as a strong factor positively affecting self-reported work practices. These findings identify a simple, cost effective path to reducing hazards in small workplaces. © 2013 Wiley Periodicals, Inc.

  6. Affect Of Cultural Factor On Consumer Behaviour In Online Shop

    Directory of Open Access Journals (Sweden)

    Agnita Yolanda

    2017-06-01

    Full Text Available Consumer behavior is an action taken by a person in making a decision to search for purchase acquire use of goods and services that will satisfy their needs. The purpose of this study is presented to determine how much the behavior of consumers to choose online shopping and direct shopping at Management of Higher School STIM Sukma Medan. The method used in this research is descriptive method with quantitative data that has been obtained through the data directly from the company. The data collected with the spaciousness of research and literature in the form of distributing questionnaires to 52 fifty-two consumers. Processing data using SPSS statistical test tools version 17.00. Based on the results of the 4 four and the indicator above the 8 eight questions as well as 52 fifty-two consumers. Results showed that the most influential in choosing online shopping is a cultural factor with a percentage of 26.14 while the most influential in choosing the direct spending is psychological factors with the percentage of 26.50.

  7. Action Memorandum for Decommissioning of TAN-607 Hot Shop Area

    Energy Technology Data Exchange (ETDEWEB)

    M. A. Pinzel

    2007-05-01

    The Department of Energy is documenting the selection of an alternative for the TAN-607 Hot Shop Area using a Comprehensive Environmental Response, Compensation, and Liability Act non-time-critical removal action (NTCRA). The scope of the removal action is limited to TAN-607 Hot Shop Area. An engineering evaluation/cost analysis (EE/CA) has assisted the Department of Energy Idaho Operations Office in identifuomg the most effective method for performing the decommissioning of this structure whose mission has ended. TAN-607 Hot Shop Area is located at Test Area North Technical Support Facility within the Idaho National Laboratory Site. The selected alternative consists of demolishing the TAN-607 aboveground structures and components, removing belowground noninert components (e.g. wood products), and removing the radiologically contaminated debris that does not meet remedial action objectives (RAOs), as defined in the Record of Decision Amendment for the V-Tanks and Explanation of Significant Differences for the PM-2A Tanks at Test Area North, Operable Unit 1-10.

  8. Exercise dependence among customers from a Parisian sport shop.

    Science.gov (United States)

    Lejoyeux, Michel; Guillot, Cecilia; Chalvin, Florence; Petit, Aymeric; Lequen, Valerie

    2012-03-01

    We assessed exercise dependence (ED), alcohol and nicotine use disorders, eating disorders, hypochondria and compulsive buying and in a population of customers of a Parisian sport shop. Five hundred consecutive customers of a sport shop were invited to participate. Diagnostic of exercise dependence was made with the Exercise Addiction Inventory and a specific questionnaire checking all diagnostic criteria. The DSM-IV-TR criteria for bulimia, alcohol and nicotine use disorders were checked and all subjects answered the CAGE and Fagerström questionnaires. Hypochondria was assessed with the DSM-IV-TR criteria and the Whiteley Index of Health Anxiety. For all parameters, customers with (ED+) and without (ED-) exercise dependence were compared. The prevalence of exercise dependence was 29.6%. Subjects from the ED+ group were younger than in the ED-group (27.1 vs 29.8 years) and there were more women. They were more dependent on alcohol, had higher scores at the CAGE questionnaire. ED+ subjects more often presented hypochondria (23 vs 15%), bulimia and binge eating and they more often made gifts to themselves and to others. Exercise dependence appears as a frequent and almost always unrecognized form of behavioral dependence in non clinical population frequenting sport shops. It is frequently associated to chemical dependence and eating disorders.

  9. Marketing vivencial: o caso de eventos musicais no shopping.

    Directory of Open Access Journals (Sweden)

    Ana Akemi Ikeda

    2005-12-01

    Full Text Available À medida que o mercado de shopping centers vem crescendo no Brasil e tornando-se cada vez mais competitivo, gerar fluxo de freqüentadores torna-se uma tarefa, cada vez mais, desafiadora. Diante deste cenário, o objetivo neste artigo é estudar a experiência proporcionada por eventos musicais em shopping. Para isso, além de pesquisa bibliográfica sobre o assunto, foi analisado um projeto de shows musicais realizado pelo Shopping Anália Franco, em São Paulo, que visava a melhorar a atração de visitantes, permanência do público no local e impacto nas vendas. O trabalho foi complementado com uma pesquisa de campo com os freqüentadores dos shows musicais. Os resultados mostraram que esse tipo de experiência pode beneficiar o estabelecimento em termos de maior simpatia e satisfação do público, melhoria de imagem, atração de novos consumidores, aumento do fluxo de visitantes e do volume de vendas.

  10. Research and Applications of Shop Scheduling Based on Genetic Algorithms

    Directory of Open Access Journals (Sweden)

    Hang ZHAO

    Full Text Available ABSTRACT Shop Scheduling is an important factor affecting the efficiency of production, efficient scheduling method and a research and application for optimization technology play an important role for manufacturing enterprises to improve production efficiency, reduce production costs and many other aspects. Existing studies have shown that improved genetic algorithm has solved the limitations that existed in the genetic algorithm, the objective function is able to meet customers' needs for shop scheduling, and the future research should focus on the combination of genetic algorithm with other optimized algorithms. In this paper, in order to overcome the shortcomings of early convergence of genetic algorithm and resolve local minimization problem in search process,aiming at mixed flow shop scheduling problem, an improved cyclic search genetic algorithm is put forward, and chromosome coding method and corresponding operation are given.The operation has the nature of inheriting the optimal individual ofthe previous generation and is able to avoid the emergence of local minimum, and cyclic and crossover operation and mutation operation can enhance the diversity of the population and then quickly get the optimal individual, and the effectiveness of the algorithm is validated. Experimental results show that the improved algorithm can well avoid the emergency of local minimum and is rapid in convergence.

  11. Measurement of self-evaluative motives: a shopping scenario.

    Science.gov (United States)

    Wajda, Theresa A; Kolbe, Richard; Hu, Michael Y; Cui, Annie Peng

    2008-08-01

    To develop measures of consumers' self-evaluative motives of Self-verification, Self-enhancement, and Self-improvement within the context of a mall shopping environment, an initial set of 49 items was generated by conducting three focus-group sessions. These items were subsequently converted into shopping-dependent motive statements. 250 undergraduate college students responded on a 7-point scale to each statement as these related to the acquisition of recent personal shopping goods. An exploratory factor analysis yielded five factors, accounting for 57.7% of the variance, three of which corresponded to the Self-verification motive (five items), Self-enhancement motive (three items), and Self-improvement motive (six items). These 14 items, along with 9 reconstructed items, yielded 23 items retained and subjected to additional testing. In a final round of data collection, 169 college students provided data for exploratory factor analysis. 11 items were used in confirmatory factor analysis. Analysis indicated that the 11-item scale adequately captured measures of the three self-evaluative motives. However, further data reduction produced a 9-item scale with marked improvement in statistical fit over the 11-item scale.

  12. Self-generated strategic behavior in an ecological shopping task.

    Science.gov (United States)

    Bottari, Carolina; Wai Shun, Priscilla Lam; Dorze, Guylaine Le; Gosselin, Nadia; Dawson, Deirdre

    2014-01-01

    OBJECTIVES. The use of cognitive strategies optimizes performance in complex everyday tasks such as shopping. This exploratory study examined the cognitive strategies people with traumatic brain injury (TBI) effectively use in an unstructured, real-world situation. METHOD. A behavioral analysis of the self-generated strategic behaviors of 5 people with severe TBI using videotaped sessions of an ecological shopping task (Instrumental Activities of Daily Living Profile) was performed. RESULTS. All participants used some form of cognitive strategy in an unstructured real-world shopping task, although the number, type, and degree of effectiveness of the strategies in leading to goal attainment varied. The most independent person used the largest number and a broader repertoire of self-generated strategies. CONCLUSION. These results provide initial evidence that occupational therapists should examine the use of self-generated cognitive strategies in real-world contexts as a potential means of guiding therapy aimed at improving independence in everyday activities for people with TBI. Copyright © 2014 by the American Occupational Therapy Association, Inc.

  13. Reliability assessment of ballistic jump squats and bench throws.

    Science.gov (United States)

    Alemany, Joseph A; Pandorf, Clay E; Montain, Scott J; Castellani, John W; Tuckow, Alexander P; Nindl, Bradley C

    2005-02-01

    The purpose of this investigation was to determine the test-retest reliability and coefficient of variation of 2 novel physical performance tests. Ten healthy men (22.0 +/- 3.0 years, 87.0 +/- 8.0 kg, 20.0 +/- 5.0% body fat) performed 30 continuous and dynamic jump squats (JS) and bench throws (BT) on 4 separate occasions. The movements were performed under loaded conditions utilizing 30% of subject's predetermined 1 repetition maximum in the back squat and bench press. Mean power (MP; W), peak power (PP; W), mean velocity (MV; m.s(-1)), peak velocity (PV; m.s(-1)), and total work (TW; J) were assessed using a ballistic measurement system (Innervations Inc., Muncie, IN). Data were analyzed using repeated measures analysis of variance with Duncan's post hoc test when mean differences were p < or = 0.05. Intraclass correlation coefficient (ICC) and within-subject coefficient of variation (CV%) were also calculated. All values are presented as mean +/- SE. BT variables were statistically similar across the 4 sessions: MP (350.0 +/- 13.9 W), PP (431.4 +/- 18.5 W) MV (1.6 +/- 0.03 m.s(-1)), PV (2.0 +/- 0.03 m.s(-1)), and TW (199.1 +/- 7.2 J). For JS, session 3 PP (1,669.8 +/- 111.2 W) was significantly greater vs. sessions 1, 2, and 4 (1,601.2 +/- 58.4 W). Session 4 MP (1,403.2 +/- 88.6 W) and MV (1.9 +/- 0.1 m.s(-1)) for JS were significantly lower during sessions 1, 2, and 3 (MP: 1,479.4.5 +/- 44.8 W, MV: 2.0 +/- 0.05 m.s(-1)). TW (834.7 +/- 24.3 J) and PV (2.2 +/- 0.04 m.s(-1)) were statistically similar during all sessions for JS. The CVs ranged from 3.0 to 7.6% for the BT and 3.2 to 5.7% for the JS. ICCs for MP, PP, MV, PV, and TW were 0.92, 0.95, 0.94, 0.91, and 0.95, respectively, during BT. ICCs during JS for MP, PP, MV, PV, and TW were 0.96, 0.98, 0.94, 0.94, and 0.89, respectively. The results of the current study support the use of a 30 continuous and dynamic BT protocol as a reliable upper-body physical performance test, which can be administered with

  14. ESCRIME: testing bench for advanced operator workstations in future plants

    International Nuclear Information System (INIS)

    Poujol, A.; Papin, B.

    1994-01-01

    The problem of optimal task allocation between man and computer for the operation of nuclear power plants is of major concern for the design of future plants. As the increased level of automation induces the modification of the tasks actually devoted to the operator in the control room, it is very important to anticipate these consequences at the plant design stage. The improvement of man machine cooperation is expected to play a major role in minimizing the impact of human errors on plant safety. The CEA has launched a research program concerning the evolution of the plant operation in order to optimize the efficiency of the human/computer systems for a better safety. The objective of this program is to evaluate different modalities of man-machine share of tasks, in a representative context. It relies strongly upon the development of a specific testing facility, the ESCRIME work bench, which is presented in this paper. It consists of an EDF 1300MWe PWR plant simulator connected to an operator workstation. The plant simulator model presents at a significant level of details the instrumentation and control of the plant and the main connected circuits. The operator interface is based on the generalization of the use of interactive graphic displays, and is intended to be consistent to the tasks to be performed by the operator. The functional architecture of the workstation is modular, so that different cooperation mechanisms can be implemented within the same framework. It is based on a thorough analysis and structuration of plant control tasks, in normal as well as in accident situations. The software architecture design follows the distributed artificial intelligence approach. Cognitive agents cooperate in order to operate the process. The paper presents the basic principles and the functional architecture of the test bed and describes the steps and the present status of the program. (author)

  15. Eating disorders: from bench to bedside and back.

    Science.gov (United States)

    Gaetani, Silvana; Romano, Adele; Provensi, Gustavo; Ricca, Valdo; Lutz, Thomas; Passani, Maria Beatrice

    2016-12-01

    The central nervous system and viscera constitute a functional ensemble, the gut-brain axis, that allows bidirectional information flow that contributes to the control of feeding behavior based not only on the homeostatic, but also on the hedonic aspects of food intake. The prevalence of eating disorders, such as anorexia nervosa, binge eating and obesity, poses an enormous clinical burden, and involves an ever-growing percentage of the population worldwide. Clinical and preclinical research is constantly adding new information to the field and orienting further studies with the aim of providing a foundation for developing more specific and effective treatment approaches to pathological conditions. A recent symposium at the XVI Congress of the Societá Italiana di Neuroscienze (SINS, 2015) 'Eating disorders: from bench to bedside and back' brought together basic scientists and clinicians with the objective of presenting novel perspectives in the neurobiology of eating disorders. Clinical studies presented by V. Ricca illustrated some genetic aspects of the psychopathology of anorexia nervosa. Preclinical studies addressed different issues ranging from the description of animal models that mimic human pathologies such as anorexia nervosa, diet-induced obesity, and binge eating disorders (T. Lutz), to novel interactions between peripheral signals and central circuits that govern food intake, mood and stress (A. Romano and G. Provensi). The gut-brain axis has received increasing attention in the recent years as preclinical studies are demonstrating that the brain and visceral organs such as the liver and guts, but also the microbiota are constantly engaged in processes of reciprocal communication, with unexpected physiological and pathological implications. Eating is controlled by a plethora of factors; genetic predisposition, early life adverse conditions, peripheral gastrointestinal hormones that act directly or indirectly on the central nervous system, all are

  16. Bench calibration of INDUS-2 beam position indicators

    International Nuclear Information System (INIS)

    Tyagi, Y.; Banerji, Anil; Kotaiah, S.

    2005-01-01

    A third generation synchrotron radiation source of energy 2.5 GeV named INDUS-2 at Centre for Advanced Technology (C.A.T), Indore (M.P) is in the advanced stage of construction. Accurate determination and correction of beam closed orbit in INDUS-2 machine within 100 of microns is a very desirable goal. Bench based calibration of Beam Position Indicators (BPI) play a very important and useful role during initial commissioning of electron machines. To precisely measure transverse position of electron beam in the Indus-2 storage ring, 56 Beam Position Indicators (BPI) will be installed in INDUS-2 machine. Out of 56 Beam Position Indicators 40 are of individual type whereas 16 are integrated with dipole vacuum chamber. The Beam Position Indicators are required to be calibrated before they can be installed. The calibration is done to determine electrical offset with respect to defined mechanical centre, to determine displacement sensitivities as well as non linearity's of BPI. Ideally when beam passes through the geometrical center of BPI's, all electrodes should have same signal strength. However due to different capacitance of electrodes and offset and drift in electronics, the electrical centre (mechanical x, y where all electrodes shows same signal strength) differs from mechanical centre of BPI. A fully automatic calibration system has been developed to carry out the calibration of Beam Position Indicators. A calibration software has been developed which has necessary utilities to process and display calibration data and results. This paper describes the calibration results of Indus-2 BPM. (author)

  17. Bench-test comparison of 26 emergency and transport ventilators.

    Science.gov (United States)

    L'Her, Erwan; Roy, Annie; Marjanovic, Nicolas

    2014-10-15

    Numerous emergency and transport ventilators are commercialized and new generations arise constantly. The aim of this study was to evaluate a large panel of ventilators to allow clinicians to choose a device, taking into account their specificities of use. This experimental bench-test took into account general characteristics and technical performances. Performances were assessed under different levels of FIO2 (100%, 50% or Air-Mix), respiratory mechanics (compliance 30,70,120 mL/cmH2O; resistance 5,10,20 cmH2O/mL/s), and levels of leaks (3.5 to 12.5 L/min), using a test lung. In total 26 emergency and transport ventilators were analyzed and classified into four categories (ICU-like, n = 5; Sophisticated, n = 10; Simple, n = 9; Mass-casualty and military, n = 2). Oxygen consumption (7.1 to 15.8 L/min at FIO2 100%) and the Air-Mix mode (FIO2 45 to 86%) differed from one device to the other. Triggering performance was heterogeneous, but several sophisticated ventilators depicted triggering capabilities as efficient as ICU-like ventilators. Pressurization was not adequate for all devices. At baseline, all the ventilators were able to synchronize, but with variations among respiratory conditions. Leak compensation in most ICU-like and 4/10 sophisticated devices was able to correct at least partially for system leaks, but with variations among ventilators. Major differences were observed between devices and categories, either in terms of general characteristics or technical reliability, across the spectrum of operation. Huge variability of tidal volume delivery with some devices in response to modifications in respiratory mechanics and FIO2 should make clinicians question their use in the clinical setting.

  18. Bench-scale studies with mercury contaminated SRS soil

    International Nuclear Information System (INIS)

    Cicero, C.A.

    1995-01-01

    Bench-scale studies with mercury contaminated soil were performed at the SRTC to determine the optimum waste loading obtainable in the glass product without sacrificing durability, leach resistance, and processability. Vitrifying this waste stream also required offgas treatment for the capture of the vaporized mercury. Four soil glasses with slight variations in composition were produced, which were capable of passing the Product Consistency Test (PCT) and the Toxicity Characteristic Leaching Procedure (TCLP). The optimum glass feed composition contained 60 weight percent soil and produced a soda-lime-silica glass when melted at 1,350 C. The glass additives used to produce this glass were 24 weight percent Na 2 CO 3 and 16 weight percent CaCO 3 . Volatilized mercury released during the vitrification process was released to the proposed mercury collection system. The proposed mercury collection system consisted of quartz and silica tubing with a Na 2 S wash bottle followed by a NaOH wash bottle. Once in the system, the volatile mercury would pass through the wash bottle containing Na 2 S, where it would be converted to Hg 2 S, which is a stable form of mercury. However, attempts to capture the volatilized mercury in a Na 2 S solution wash bottle were not as successful as anticipated. Maximum mercury captured was only about 3.24% of the mercury contained in the feed. Mercury capture efforts then shifted to condensing and capturing the volatilized mercury. These attempts were much more successful at capturing the volatile mercury, with a capture efficiency of 34.24% when dry ice was used to pack the condenser. This captured mercury was treated on a mercury specific resin after digestion of the volatilized mercury

  19. CPAP Devices for Emergency Prehospital Use: A Bench Study.

    Science.gov (United States)

    Brusasco, Claudia; Corradi, Francesco; De Ferrari, Alessandra; Ball, Lorenzo; Kacmarek, Robert M; Pelosi, Paolo

    2015-12-01

    CPAP is frequently used in prehospital and emergency settings. An air-flow output minimum of 60 L/min and a constant positive pressure are 2 important features for a successful CPAP device. Unlike hospital CPAP devices, which require electricity, CPAP devices for ambulance use need only an oxygen source to function. The aim of the study was to evaluate and compare on a bench model the performance of 3 orofacial mask devices (Ventumask, EasyVent, and Boussignac CPAP system) and 2 helmets (Ventukit and EVE Coulisse) used to apply CPAP in the prehospital setting. A static test evaluated air-flow output, positive pressure applied, and FIO2 delivered by each device. A dynamic test assessed airway pressure stability during simulated ventilation. Efficiency of devices was compared based on oxygen flow needed to generate a minimum air flow of 60 L/min at each CPAP setting. The EasyVent and EVE Coulisse devices delivered significantly higher mean air-flow outputs compared with the Ventumask and Ventukit under all CPAP conditions tested. The Boussignac CPAP system never reached an air-flow output of 60 L/min. The EasyVent had significantly lower pressure excursion than the Ventumask at all CPAP levels, and the EVE Coulisse had lower pressure excursion than the Ventukit at 5, 15, and 20 cm H2O, whereas at 10 cm H2O, no significant difference was observed between the 2 devices. Estimated oxygen consumption was lower for the EasyVent and EVE Coulisse compared with the Ventumask and Ventukit. Air-flow output, pressure applied, FIO2 delivered, device oxygen consumption, and ability to maintain air flow at 60 L/min differed significantly among the CPAP devices tested. Only the EasyVent and EVE Coulisse achieved the required minimum level of air-flow output needed to ensure an effective therapy under all CPAP conditions. Copyright © 2015 by Daedalus Enterprises.

  20. Therapeutics discovery: From bench to first in-human trials.

    Science.gov (United States)

    Al-Hujaily, Ensaf M; Khatlani, Tanvir; Alehaideb, Zeyad; Ali, Rizwan; Almuzaini, Bader; Alrfaei, Bahauddeen M; Iqbal, Jahangir; Islam, Imadul; Malik, Shuja; Marwani, Bader A; Massadeh, Salam; Nehdi, Atef; Alsomaie, Barrak; Debasi, Bader; Bushnak, Ibraheem; Noibi, Saeed; Hussain, Syed; Wajid, Wahid Abdul; Armand, Jean-Pierre; Gul, Sheraz; Oyarzabal, Julen; Rais, Rana; Bountra, Chas; Alaskar, Ahmed; Knawy, Bander Al; Boudjelal, Mohamed

    2018-03-01

    The 'Therapeutics discovery: From bench to first in-human trials' conference, held at the King Abdullah International Medical Research Center (KAIMRC), Ministry of National Guard Health Affairs (MNGHA), Kingdom of Saudi Arabia (KSA) from October 10-12, 2017, provided a unique opportunity for experts worldwide to discuss advances in drug discovery and development, focusing on phase I clinical trials. It was the first event of its kind to be hosted at the new research center, which was constructed to boost drug discovery and development in the KSA in collaboration with institutions, such as the Academic Drug Discovery Consortium in the United States of America (USA), Structural Genomics Consortium of the University of Oxford in the United Kingdom (UK), and Institute of Materia Medica of the Chinese Academy of Medical Sciences in China. The program was divided into two parts. A pre-symposium day took place on October 10, during which courses were conducted on clinical trials, preclinical drug discovery, molecular biology and nanofiber research. The attendees had the opportunity for one-to-one meetings with international experts to exchange information and foster collaborations. In the second part of the conference, which took place on October 11 and 12, the clinical trials pipeline, design and recruitment of volunteers, and economic impact of clinical trials were discussed. The Saudi Food and Drug Administration presented the regulations governing clinical trials in the KSA. The process of preclinical drug discovery from small molecules, cellular and immunologic therapies, and approaches to identifying new targets were also presented. The recommendation of the conference was that researchers in the KSA must invest more fund, talents and infrastructure to lead the region in phase I clinical trials and preclinical drug discovery. Diseases affecting the local population, such as Middle East Respiratory Syndrome and resistant bacterial infections, represent the optimal