78 FR 12369 - Product Change-Parcel Return Service Negotiated Service Agreement

Science.gov (United States)

2013-02-22

... POSTAL SERVICE Product Change--Parcel Return Service Negotiated Service Agreement AGENCY: Postal...: The United States Postal Service[supreg] hereby gives notice that, pursuant to 39 U.S.C. 3642 and 3632... States Postal Service to Add Parcel Return Service Contract 3 to Competitive Product List. Documents are...

The dilemma of service productivity and service innovation : An empirical exploration in financial services

NARCIS (Netherlands)

Aspara, Jaakko; Klein, Jan; Luo, Xueming; Tikkanen, Henrikki

2017-01-01

We conduct a systematic exploratory investigation of the effects of firms’ existing service productivity on the success of their new service innovations. Although previous research extensively addresses service productivity and service innovation, respectively, this is the first empirical study that

Influence of product innovations on financial performance of small and medium-sized enterprises in the Czech Republic

Directory of Open Access Journals (Sweden)

Jakub Tabas

2012-01-01

Full Text Available Objective of this article is to determine possible effect of product innovations on the financial performance of small and medium-sized enterprises in the Czech Republic. The pilot research has been realized on the statistical sample of 100 companies which were categorized into three basic groups; service companies, trade companies, and production companies. As the measure of innovation effect, the authors applied the deviation of production power, i.e. the ration of EBIT to assets, of a business entity from the industry average while the industry average of production power was selected especially in order to reduce the influence of the economy cycles. In the three categories of companies, different effects of product innovations have been observed. In the service companies and trade companies, the positive effect is limited because of potential simplicity of imitation by competitors. More positive effect of product innovations has been observed in production companies which can protect the products or production processes better then service companies or trade companies where the product innovations are mostly connected with extension of extension of services portfolio offered. For the conclusion, the authors provide suppositions and designs for their future research in this problem of innovations’ effectiveness measurement.

The Adoption and Diffusion of Service Products

OpenAIRE

Myung Joong Kwon

2003-01-01

The objective of this paper is to theoretically explore the innovation, adoption and diffusion of service product. A theoretical model of the diffusion of service product is developed that takes account of transportation, waiting and searching casts in the adoption of service product. The main results of the model are; (1) the diffusion of service product is slower than that of the manufacturing equivalent and (2) the delivery or retail distribution service speeds up the diffusion of the manu...

Product and Service Directory 2004 Issue

International Nuclear Information System (INIS)

Agnihotri, N.K.

2003-01-01

This annual November-December issue of the Nuclear Plant Journal serves as directory of information resources on products and services related to the nuclear power industry. The directory consists of over 3,000 products and services submitted by over 300 suppliers worldwide during October and November 2003. The issue is divided into 4 main areas: Products and Services, Corporate Capabilities, and Suppliers

CONSUMERS PRODUCTS AND SERVICES VALUE PERCEPTION

Directory of Open Access Journals (Sweden)

Bogdan Nichifor

2008-12-01

Full Text Available This article is a theoretical approach on products and services as value satisfiers. Consumers have knowledge about the personal, symbolic values that products, services and brands help them satisfy or achieve. Values are people’s broad life goals. Values often involve the emotional affect associated with such goals and needs (the strong feelings and emotions that accompany success. Recognizing when a value has been satisfied or a basic life goal has been achieved is an internal feeling that is somewhat intangible and subjective. In contrast, functional and psychosocial consequences are more tangible and are more obvious when they occur. Salespeople add value by identifying customer needs and devising or delivering a solution for those needs. Salespeople are able to adapt how products or/and services are presented or even to adapt products/services so that they meet the needs of the buyers. Such adaption powers professional selling, because customers often don’t know what they need or how to configure a solution to their needs. Satisfying a value usually elicits positive affect (happiness, joy, satisfaction, whereas blocking a value produces negative affect (frustration, anger, disappointment. Consumers can have products and services knowledge about products and services attributes, consequences of products or services use and personal values. Most marketing research focuses on one type of products and services knowledge – usually attributes or consequences, where the focus typically is on benefits rather than risks. Values are examined less frequently and usually in isolation. This paper objective is to show the importance of creating, delivering, and capturing buyer value. A company’s ability to deliver value to its customers is closely tied with its ability to create satisfaction for its employees and other stakeholders. Value ultimately depends on the perceiver. Smart companies not only offer purchase value but also offer use value

Productivity in services: a systematic review

Directory of Open Access Journals (Sweden)

Noel Torres Júnior

2013-03-01

Full Text Available Through the method of Systematic Review of Literature (SRL, this study conducted an analysis of productivity in services. For this purpose, fourteen journals of Operations Management and Scielo database were consulted. The studies were analyzed with respect to six criteria for classification: i type of study, ii investigated business sector, iii affiliation of authors, iv prevailing methodological approach, v themes, e vi methods used in comparative analyzes of performance. It was found that the greatest amount of work used the modeling approach to assess the productivity, particularly by linear programming methodology - Data Analysis Envelopment (DEA. It was observed that the vast majority of authors are academic, there are few publications of researchers from companies or that have both types of researchers. The study identified four recurring themes in the articles. Then, some studies have focused on the establishment of productivity indicators and their analysis over time, comparing the performance of different firms or industries. Other studies have identified the characteristics and difficulties of measuring productivity in services in relation to manufacturing companies. Different studies have proposed indicators to measure productivity in services. Finally, in light of the main textbooks on operation's management and service literature, this study identified key strategies and methods for improving productivity in services. It was found that the theme productivity in services is a promising research topic.

Bundling Products and Services Through Modularization Strategies

DEFF Research Database (Denmark)

Bask, Anu; Hsuan, Juliana; Rajahonka, Mervi

2012-01-01

Modularity has been recognized as a powerful tool in improving the efficiency and management of product design and manufacturing. However, the integrated view on covering both, product and service modularity for product-service systems (PSS), is under researched. Therefore, in this paper our...... objective is to contribute to the PSS modularity. Thus, we describe configurations of PSSs and the bundling of products and services through modularization strategies. So far there have not been tools to analyze and determine the correct combinations of degrees of product and service modularities....

Development of an Innovation Model Based on a Service-Oriented Product Service System (PSS

Directory of Open Access Journals (Sweden)

Seungkyum Kim

2015-10-01

Full Text Available Recently, there have been many attempts to cope with increasingly-diversified and ever-changing customer needs by combining products and services that are critical components of innovation models. Although not only manufacturers, but also service providers, try to integrate products and services, most of the previous studies on Product Service System (PSS development deal with how to effectively integrate services into products from the product-centric point of view. Services provided by manufacturers’ PSSes, such as delivery services, training services, disposal services, and so on, offer customers ancillary value, whereas products of service providers’ PSSes enrich core value by enhancing the functionality and quality of the service. Thus, designing an effective PSS development process from the service-centric point of view is an important research topic. Accordingly, the purpose of this paper is to propose a service-oriented PSS development process, which consists of four stages: (1 strategic planning; (2 idea generation and selection; (3 service design; and (4 product development. In the proposed approach, the PSS development project is initiated and led by a service provider from a service-centric point of view. From the perspective of methodology, customer needs are converted into product functions according to Quality Function Deployment (QFD, while Analytic Hierarchy Process (AHP is employed to prioritize the functions. Additionally, this paper illustrates a service-oriented PSS development that demonstrates the application of the proposed process. The proposed process and illustration are expected to serve as a foundation for research on service-oriented PSS development and as a useful guideline for service providers who are considering the development of a service-oriented PSS.

Procurement as driver of sustainable product-service innovation

OpenAIRE

Bratt, Cecilia; Broman, Göran; Robèrt, Karl-Henrik; Sophie, Hallstedt

2012-01-01

Current patterns of production and consumption need to change and they need to do so radically. For this shift sustainability-oriented product-services are highly potential contributors. Product-services have been described as a market proposition that extends the functionality of a product beyond the traditional view by inclusion of additional services into the product-service system. From a producer perspective this opens up for a differentiation from competitors and thereby for strategic m...

Beyond products: services-based strategy.

Science.gov (United States)

Quinn, J B; Doorley, T L; Paquette, P C

1990-01-01

Services technologies are changing the way companies in every industry--manufacturers and service providers alike--compete. Vertical integration, physical facilities, even a seemingly superior product can no longer assure a competitive edge. Instead, sustainable advantage is more and more likely to come from developing superior capabilities in a few core service skills--and out-sourcing as much of the rest as possible. Within companies, technology is increasing the leverage of service activities: today, more value added comes from design innovations, product image, or other attributes that services create than from the production process. New technologies also let independent enterprises provide world-class services at lower costs than customers could achieve if they performed the activities themselves. These changes have far-reaching implications for how managers structure their organizations and define strategic focus. Companies like Apple, Honda, and Merck show that a less integrated but more focused organization is key to competitive success. They build their strategies around a few highly developed capabilities. And they outsource as many of the other activities in their value chain as possible. To help managers develop an activity-focused strategy, the authors offer a new way to approach competitive analyses, guidelines for determining which activities to outsource and which to retain, and an overview of the risks and rewards of strategic outsourcing. Throughout, they draw on the findings of their three-year study of the major impacts technology has had in the service sector.

Independent Energy's Solar thermal products and services listing

International Nuclear Information System (INIS)

Anon.

1991-01-01

This article is a listing of companies offering products and services for the development of solar thermal electric power plants. The listing provides the company name under a heading describing the product or service the company provides. The products and services covered by the listing include developers and owner/operators, manufacturers of equipment, instruments and controls, consulting services, engineering and construction, and financial and legal services

Achieving Customer Satisfaction through Integrated Products and Services

DEFF Research Database (Denmark)

Raja, Jawwad; Bourne, Dorota; Goffin, Keith

2013-01-01

Complex products such as manufacturing equipment have always needed maintenance and repair services. Increasingly, leading manufacturers are integrating products and services to generate increased revenues and achieve customer satisfaction. Designing integrated products and services requires...... a different approach to new product development and a clear understanding of how customers perceive the value they obtain from actual usage of products and services—so-called value-in-use. However, there is a lack of research on integrated products and services and how they impact customer satisfaction....... An exploratory study was undertaken to understand customers' views on integrated products and services and the value-in-use derived from such offerings. As value-in-use and its impacts are complicated concepts, a technique from psychology—Repertory Grid Technique—was used to gather data in 33 interviews...

75 FR 74755 - Product Change-Parcel Return Service Negotiated Service Agreement

Science.gov (United States)

2010-12-01

... POSTAL SERVICE Product Change--Parcel Return Service Negotiated Service Agreement AGENCY: Postal.... SUPPLEMENTARY INFORMATION: The United States Postal Service[supreg] hereby gives notice that on November 17, 2010, it filed with the Postal Regulatory Commission a Request of the United States Postal Service to...

DISTRIBUTION OF BANKING PRODUCTS AND SERVICES

Directory of Open Access Journals (Sweden)

BULGAREA CATALIN NICOLAE

2010-12-01

Full Text Available Starting with the 90s, retails banks have faced several challenges. One of them is how to efficiently deliver their products and services to the customers. In fact, the most important challenge of a bank is how to efficiently reach the customer, with the right product or service, at the right time. Today, they can choose between branches, contact centers, ATMs, online channels, portals and web banks. Multichannel banking is, therefore, more relevant than ever. Multichannel banking is more than just offering multiple channels, but offering integrated channels, with the optimal balance of services, prices and offer across channels. Banks should have the ability to deliver the right service at the right time in the right channel. The bank should define exactly how they are going to use each channels, which services and products in which channels, how to mix and integrate the channels and how to support the channels

77 FR 37078 - Product Change-Parcel Select and Parcel Return Service Negotiated Service Agreement

Science.gov (United States)

2012-06-20

... POSTAL SERVICE Product Change--Parcel Select and Parcel Return Service Negotiated Service... United States Postal Service[supreg] hereby gives notice that, pursuant to 39 U.S.C. 3642 and 3632(b)(3... Postal Service to Add Parcel Select & Parcel Return Service Contract 4 to Competitive Product List...

A systematic apporach to service oriented product development

DEFF Research Database (Denmark)

Matzen, Detlef

Throughout the last years, manufacturing industry has experienced a trend towards a higher level of operational integration with their customers, i.e. manufacturers differentiate their offer from competitors by combining physical and software products with service plans and service support...... operations. This integration of manufacturing and service business holds a number of potential advantages, such as optimised operational performance and improved insights into use phase processes. To realise these potential advantages, products and service operations must fit to and support each other, which...... calls for an integrated approach to their development. The integrated development of solution concepts spanning products, service delivery systems and matching delivery business models is the theme of this thesis. A design based approach - service oriented product development - is proposed...

Developing products and services for a deregulated market while regulated

International Nuclear Information System (INIS)

Haites, E.F.

1997-01-01

Products and services developed for a deregulated electric power industry were discussed. The wide-ranging discussion covered products created by unbundling existing services, new products and services related to energy use, products created by expansion into communications services, and the pricing of products and services. In addition to products and services, the discussion also covered strategies for a deregulated market and the challenges of raising equity capital in a regulated environment

77 FR 58739 - Small Business Size Standards: Educational Services

Science.gov (United States)

2012-09-24

... Business Investment Company (SBIC), 7(a), and Certified Development Company (CDC or 504) Loan Programs... examines its characteristics (such as average firm size, startup costs, industry competition, and... logistic and support services. Second, the commenter maintained that the value of Federal contracts has...

Cogeneration. Section 2: Products and services

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a directory of suppliers of products and services in the area of cogeneration. The subheadings of this directory include developers and owner operators, system packagers, manufacturers of prime movers, equipment manufacturers, instruments and controls manufacturing, consulting services, appraisal and valuation, computer services, environmental services, feasibility services, hydrology, marketing, measurements, meteorology, regulatory and licensing, research, testing, training and personnel, engineering and construction, operations and maintenance, and insurance, financial and legal services

Customized products and cloud service information system development research

Directory of Open Access Journals (Sweden)

Hung Chien-Wen

2017-01-01

Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

Photovoltaics. Section 2: Products and services

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a directory of companies providing products and services in the area of photovoltaics. The subheadings of the directory include developers and distributors, equipment manufacturers, measuring instruments and controls, consulting services, engineering and construction, operation and maintenance, project management, repair, and financial and legal services

Modelling size-fractionated primary production in the Atlantic Ocean from remote sensing

Science.gov (United States)

Brewin, Robert J. W.; Tilstone, Gavin H.; Jackson, Thomas; Cain, Terry; Miller, Peter I.; Lange, Priscila K.; Misra, Ankita; Airs, Ruth L.

2017-11-01

Marine primary production influences the transfer of carbon dioxide between the ocean and atmosphere, and the availability of energy for the pelagic food web. Both the rate and the fate of organic carbon from primary production are dependent on phytoplankton size. A key aim of the Atlantic Meridional Transect (AMT) programme has been to quantify biological carbon cycling in the Atlantic Ocean and measurements of total primary production have been routinely made on AMT cruises, as well as additional measurements of size-fractionated primary production on some cruises. Measurements of total primary production collected on the AMT have been used to evaluate remote-sensing techniques capable of producing basin-scale estimates of primary production. Though models exist to estimate size-fractionated primary production from satellite data, these have not been well validated in the Atlantic Ocean, and have been parameterised using measurements of phytoplankton pigments rather than direct measurements of phytoplankton size structure. Here, we re-tune a remote-sensing primary production model to estimate production in three size fractions of phytoplankton (10 μm) in the Atlantic Ocean, using measurements of size-fractionated chlorophyll and size-fractionated photosynthesis-irradiance experiments conducted on AMT 22 and 23 using sequential filtration-based methods. The performance of the remote-sensing technique was evaluated using: (i) independent estimates of size-fractionated primary production collected on a number of AMT cruises using 14C on-deck incubation experiments and (ii) Monte Carlo simulations. Considering uncertainty in the satellite inputs and model parameters, we estimate an average model error of between 0.27 and 0.63 for log10-transformed size-fractionated production, with lower errors for the small size class (10 μm), and errors generally higher in oligotrophic waters. Application to satellite data in 2007 suggests the contribution of cells 2 μm to total

Geothermal. Section 2: Products and services

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a directory of companies providing products and services in the area of geothermal power. The subheadings of the directory include developers and owner operators, equipment manufacturers, measuring instruments and controls, consulting services, engineering and construction, operation and maintenance, project management, repair, and financial and legal services

Hydropower. Section 2: Products and services

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a directory of companies providing products and services in the area of hydroelectric power. The subheadings of the directory include developers and owner operators, equipment manufacturers, measuring instruments and controls, consulting services, engineering and construction, operation and maintenance, project management, repair, and financial and legal services

Windpower. Section 2: Products and services

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a directory of companies providing products and services in the area of wind power. The subheadings of the directory include developers and owner operators, equipment manufacturers, measuring instruments and controls, consulting services, engineering and construction, operation and maintenance, project management, repair, and financial and legal services

Food Production & Service Curriculum Guide.

Science.gov (United States)

Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

This curriculum guide deals with planning and implementing a course in food production and service. Addressed in the course are the following topics: using basic food service processes; performing the tasks of a kitchen helper, stock clerk, baker's helper, pastry helper, cook's helper, pantry goods maker, short order cook, cook, dining room…

76 FR 27952 - Small Business Size Standards: Professional, Scientific and Technical Services.

Science.gov (United States)

2011-05-13

... Administration (SBA or Agency) proposed to increase small business size standards for 35 industries and one sub... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG07 Small Business Size Standards: Professional, Scientific and Technical Services. AGENCY: U.S. Small Business Administration. ACTION: Proposed...

Computer Aided Product Service Systems Design : Service CAD and Its integration with Life Cycle Simulation

NARCIS (Netherlands)

Komoto, H.

2009-01-01

Integration of product design into service design, or vice versa, is considered to bring more efficient and effective value addition. Besides EcoDesign tools and methods, a methodology to design such an integration of products and services from a systemic perspective, or product-service systems

Effect of colour and relative product size (RPS) on consumer attitudes

OpenAIRE

Varsha Jain; Subhadip Roy; Adwita Pant

2013-01-01

Colour and visuals are used extensively by the advertisers of different product categories to attract consumer attention and create favourable attitude. Based on this premise, the present study aimed to explore the effect of colour and relative product size on the consumer attitudes incorporating the moderating role of product familiarity. An experimental design was used, with a sample size of 420 respondents of 18-25 years in a 3 (Product Size: Large/Med/Small) X 2 (Ad Colour: CL/BW) X 2 (Ge...

Service Engineering as an Approach to Designing Industrial Product Service Systems

OpenAIRE

Schuh, G.; Gudergan, G.

2009-01-01

Organised by: Cranfield University Unique customer solutions which integrate products and services into a high value offering have the potential to successfully differentiate from competition even prices are dictating product markets. However, companies face tremendous challenges to develop customer solutions. Service engineering is considered to be the scientific discipline which supports the design task of intangible offerings and thus a foundation for solution design. We enh...

75 FR 52378 - International Product Change-United States Postal Service Inbound Market-Dominant Multi-Service...

Science.gov (United States)

2010-08-25

... POSTAL SERVICE International Product Change--United States Postal Service Inbound Market-Dominant... Inbound Market-Dominant Multi- Service Agreements to the Market-Dominant Products List pursuant to 39 U.S... the Postal Regulatory Commission to Add Market-Dominant Multi-Service Agreements with Foreign Postal...

Characteristics of Strategies in Product/Service-System Development

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles

2006-01-01

The underlying principle in Product/Service-Systems (PSS) strategy is to shift from business based on the value of the transfer of product ownership and responsibility, to business based on the value of utility of the product and services. This paper identifies characteristics of various strategi...

Disrupting Faculty Service: Using Technology to Increase Academic Service Productivity

Science.gov (United States)

Burnett, Perry; Shemroske, Kenneth; Khayum, Mohammed

2014-01-01

Scholarly attention regarding faculty involvement has primarily focused on faculty opinions of shared governance and faculty influence on institutional decision-making. There has been limited attention given to academic service productivity and the effectiveness of traditional approaches toward the accomplishment of faculty service requirements.…

Technology Epiphany and an Integrated Product and Service

Directory of Open Access Journals (Sweden)

Satoru Goto

2017-07-01

Full Text Available This study aims at exploring how an integrated product and service contributes to achieving Innovation of Meaning (IoM or technology epiphany. Existing IoM studies have focused on intended meaning (as defined in new product development and ignored the received meaning that users reconstruct. The process by which a user assigns meaning to things can not only be static but also dynamic. This study focuses on integrated products and contexts offered by services and analyses the case of Japan’s largest manufacturer of ankle-foot orthoses. The results show that the service guides the users to reconstruct the meaning in dynamic cognitive processes and use the metaphors that contribute to the consistency between products and services.

Automatic milking systems, farm size, and milk production.

Science.gov (United States)

Rotz, C A; Coiner, C U; Soder, K J

2003-12-01

Automatic milking systems (AMS) offer relief from the demanding routine of milking. Although many AMS are in use in Europe and a few are used in the United States, the potential benefit for American farms is uncertain. A farm-simulation model was used to determine the long-term, whole-farm effect of implementing AMS on farm sizes of 30 to 270 cows. Highest farm net return to management and unpaid factors was when AMS were used at maximal milking capacity. Adding stalls to increase milking frequency and possibly increase production generally did not improve net return. Compared with new traditional milking systems, the greatest potential economic benefit was a single-stall AMS on a farm size of 60 cows at a moderate milk production level (8600 kg/cow). On other farm sizes using single-stall type robotic units, losses in annual net return of 0 dollars to 300 dollars/cow were projected, with the greatest losses on larger farms and at high milk production (10,900 kg/cow). Systems with one robot serving multiple stalls provided a greater net return than single-stall systems, and this net return was competitive with traditional parlors for 50- to 130-cow farm sizes. The potential benefit of AMS was improved by 100 dollars/cow per year if the AMS increased production an additional 5%. A 20% reduction in initial equipment cost or doubling milking labor cost also improved annual net return of an AMS by up to 100 dollars/cow. Annual net return was reduced by 110 dollars/cow, though, if the economic life of the AMS was reduced by 3 yr for a more rapid depreciation than that normally used with traditional milking systems. Thus, under current assumptions, the economic return for an AMS was similar to that of new parlor systems on smaller farms when the milking capacity of the AMS was well matched to herd size and milk production level.

78 FR 63521 - Product Change-Parcel Select & Parcel Return Service Negotiated Service Agreement

Science.gov (United States)

2013-10-24

... Request of the United States Postal Service to Add Parcel Select & Parcel Return Service Contract 5 to... POSTAL SERVICE Product Change--Parcel Select & Parcel Return Service Negotiated Service Agreement.... SUPPLEMENTARY INFORMATION: The United States Postal Service[supreg] hereby gives notice that, pursuant to 39 U.S...

Food Production, Management and Services: Service. Teacher Edition. Second Edition.

Science.gov (United States)

Palan, Earl

This food production, management, and services teacher guide contains nine units: (1) orientation; (2) types of service; (3) table settings; (4) dining room personnel; (5) dining room procedures; (6) side work; (7) guest/employee relationships; (8) sales techniques; and (9) safety and sanitation. Suggestions are included to increase reinforcement…

CHARACTERISTICS OF ONLINE BANKING PRODUCTS AND SERVICES

OpenAIRE

BUCUR Luiza Emanuela

2015-01-01

Online banking is the newest and least understood delivery channel for retail banking services. This article show how customers perceive Online Banking Services. Focuses on the issues associated with internet banking service quality. For customer service quality, focus is on access, credibility, communication, understanding the costumer and collaboration. For online banking services focus is on: ease of use, accuracy, timelines, aesthetics and security. For banking service product quality foc...

Particle size distribution of selected electronic nicotine delivery system products.

Science.gov (United States)

Oldham, Michael J; Zhang, Jingjie; Rusyniak, Mark J; Kane, David B; Gardner, William P

2018-03-01

Dosimetry models can be used to predict the dose of inhaled material, but they require several parameters including particle size distribution. The reported particle size distributions for aerosols from electronic nicotine delivery system (ENDS) products vary widely and don't always identify a specific product. A low-flow cascade impactor was used to determine the particle size distribution [mass median aerodynamic diameter (MMAD); geometric standard deviation (GSD)] from 20 different cartridge based ENDS products. To assess losses and vapor phase amount, collection efficiency of the system was measured by comparing the collected mass in the impactor to the difference in ENDS product mass. The levels of nicotine, glycerin, propylene glycol, water, and menthol in the formulations of each product were also measured. Regardless of the ENDS product formulation, the MMAD of all tested products was similar and ranged from 0.9 to 1.2 μm with a GSD ranging from 1.7 to 2.2. There was no consistent pattern of change in the MMAD and GSD as a function of number of puffs (cartridge life). The collection efficiency indicated that 9%-26% of the generated mass was deposited in the collection system or was in the vapor phase. The particle size distribution data are suitable for use in aerosol dosimetry programs. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Reconfiguration of Service Production Systems in Response to Offshoring

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

2017-01-01

Purpose: A service production system has a structure composed of task execution, agents performing tasks and a resulting service output. The purpose of this paper is to understand how such a service production system changes as a consequence of offshoring.Design/methodology/approach: Drawing...... of a service production system in response to change ignited by offshoring. The authors find recurring effects between structures that enable and constrain agents and agents who shape the structure of the production system. Research limitations/implications: The paper offers a novel contribution to the service...... operations management literature by applying practice theory. Moreover, the authors propose a detailed, activity-driven view of service production systems and service offshoring. The authors contribute to practice theory by extending its domain to operations management.Practical implications...

Waste management: products and services

International Nuclear Information System (INIS)

Anon.

1992-01-01

A number of products and services related to radioactive waste management are described. These include: a portable cement solidification system for waste immobilization; spent fuel storage racks; storage and transport flasks; an on-site low-level waste storage facility; supercompactors; a mobile waste retrieval and encapsulation plant; underwater crushers; fuel assembly disposal; gaseous waste management; environmental restoration and waste management services; a waste treatment consultancy. (UK)

Designing Integrated Product- Service System Solutions in Manufacturing Industries

DEFF Research Database (Denmark)

Costa, Nina; Patrício, Lia; Morelli, Nicola

2015-01-01

Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

Pre-service physics teachers' ideas on size, visibility and structure of the atom

International Nuclear Information System (INIS)

Uenlue, Pervin

2010-01-01

Understanding the atom gives the opportunity to both understand and conceptually unify the various domains of science, such as physics, chemistry, biology, astronomy and geology. Among these disciplines, physics teachers are expected to be particularly well educated in this topic. It is important that pre-service physics teachers know what sort of theories regarding the atom they will bring into their own classrooms. Six tasks were developed, comprising size, visibility and structure of the atom. These tasks carried out by pre-service physics teachers were examined by content analysis and six categories were determined. These are size, visibility, subatomic particles, atom models, electron orbit and electron features. Pre-service physics teachers' ideas about the atom were clarified under these categories.

PENGARUH SERVICE QUALITY, PRODUCT QUALITY DAN PERCEIVED VALUE TERHADAP KEPUASAN DAN LOYALITAS PELANGGAN INDUSTRI KAYU PERHUTANI

Directory of Open Access Journals (Sweden)

Winarni Saftarya Timedina Gultom

2016-07-01

Full Text Available The purpose of this research is to analyze the influences of service quality, product quality and perceived value on the satisfaction and loyalty of the customers of Perhutani wood industry, the level of customer satisfaction and loyalty and managerial implications. Four data analysis techniques were used including the structural equation modeling partial least squares (SEMPLS with 24 exogenous latent variable attributes and 6 endogenous latent variable attributes; CSI, CLI and IPA. SEMPLS results showed that the variables of service quality (T-statistic=2, 79*>T-table=1, 96 and product quality (T-statistic=6, 45*>T-table=1, 96 significantly influence the satisfaction of the customers of Perhutani wood industry. Perceived value variable (T-statistic=0, 65service quality, product quality, and perceived value provided by Perhutani wood industry. The main priority of the performances to be improved based on IPA include the attributes of accuracy of product sizes: length, width, thickness, complaint handling, product delivery, service employees, comprehension of needs, officer awareness, information on the documents and prevailing prices, service time completion, purchase document accuracy, price certainty, allocation certainty, suitability prices with quality, and affordable product prices.Keywords: perhutani, wood industry, satisfaction, loyalty, SEMPLS

Valuing ecosystem services. A shadow price for net primary production

International Nuclear Information System (INIS)

Richmond, Amy; Kaufmann, Robert K.; Myneni, Ranga B.

2007-01-01

We analyze the contribution of ecosystem services to GDP and use this contribution to calculate an empirical price for ecosystem services. Net primary production is used as a proxy for ecosystem services and, along with capital and labor, is used to estimate a Cobb Douglas production function from an international panel. A positive output elasticity for net primary production probably measures both marketed and nonmarketed contributions of ecosystems services. The production function is used to calculate the marginal product of net primary production, which is the shadow price for ecosystem services. The shadow price generally is greatest for developed nations, which have larger technical scalars and use less net primary production per unit output. The rate of technical substitution indicates that the quantity of capital needed to replace a unit of net primary production tends to increase with economic development, and this rate of replacement may ultimately constrain economic growth. (author)

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

78 FR 56248 - Product Change-Parcel Select Negotiated Service Agreement

Science.gov (United States)

2013-09-12

... POSTAL SERVICE Product Change--Parcel Select Negotiated Service Agreement AGENCY: Postal Service...: The United States Postal Service[supreg] hereby gives notice that, pursuant to 39 U.S.C. 3642 and 3632... States Postal Service to Add Parcel Select Contract 7 to Competitive Product List. Documents are...

Marketing Information Products and Services : A Primer for ...

International Development Research Centre (IDRC) Digital Library (Canada)

Marketing Information Products and Services : A Primer for Librarians and Information Professionals. Couverture du livre Marketing Information Products and Services : A Primer for Librarians and Information Professionals. Directeur(s) : Abhinandan K. Jain, Ashok Jambhekar, T.P.Rama Rao et S. Sreenivas Rao. Maison(s) ...

Exploring product and service innovation similarities and differences

NARCIS (Netherlands)

Nijssen, E.J.; Hillebrand, B.; Vermeulen, P.A.M.; Kemp, R.G.M.

2006-01-01

This paper aims to provide an initial step towards a synthesis of new service and new product development research. Using a baseline model of innovation, applicable to innovation in general, we hypothesize differential context effects between new service and product development in order to better

Production, Innovation and Service Networks

DEFF Research Database (Denmark)

Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Johansen, John

2012-01-01

Production, innovation and service networks of companies all over the world become increasingly decentralised, specialised and interdependent. These three characteristics combined inevitably lead to the formation of complex configurations of resources, crossing both national and organisational...... borders. The existing studies do not adequately address the complex interplay between co-evolving production, innovation and service networks. The widening geographical and cognitive gaps between these networks mean that coordinating them and managing their interfaces in a global operations context...... are becoming strategically important. The purpose of this paper is to address this issue and to develop a number of propositions about the development and organisation of these networks. The paper highlights the critical importance of engineering operations in this process. The propositions are developed...

Production, Innovation and Service Networks

DEFF Research Database (Denmark)

Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Johansen, John

2011-01-01

is becoming strategically important. The purpose of this paper is to address this issue and to develop a number of propositions about how companies can organize these networks and coordinate between them effectively. The propositions are developed by employing the design science approach based on a literature......Production, innovation and service networks of companies all over the world become increasingly decentralized, specialized and interdependent. The three characteristics combined inevitably lead to the formation of complex configurations of assets and capabilities crossing both national...... and organisational borders. The existing studies do not adequately address the complex interplay between co-evolving production, innovation and service networks. The widening geographical and cognitive gap between these networks means that coordinating them and managing their interfaces in global operations context...

Farm size - productivity relationships among arable crops farmers ...

African Journals Online (AJOL)

The study was designed to analyze the relationship between farm size and resource productivity among arable crop farmers in Imo state, and isolate the major determinants of agricultural productivity. Data used for the study were collected from a sample of 120 farmers randomly selected from Okigwe and Orlu agricultural ...

77 FR 66193 - Product Change-Parcel Select Negotiated Service Agreement

Science.gov (United States)

2012-11-02

... POSTAL SERVICE Product Change--Parcel Select Negotiated Service Agreement AGENCY: Postal Service... United States Postal Service[supreg] hereby gives notice that, pursuant to 39 U.S.C. 3642 and 3632(b)(3... Postal Service To Add Parcel Select Contract 6 to Competitive Product List. Documents are available at...

77 FR 42780 - Product Change-Parcel Select Negotiated Service Agreement

Science.gov (United States)

2012-07-20

... POSTAL SERVICE Product Change--Parcel Select Negotiated Service Agreement AGENCY: Postal Service... United States Postal Service[supreg] hereby gives notice that, pursuant to 39 U.S.C. 3642 and 3632(b)(3... Postal Service to Add Parcel Select Contract 3 to Competitive Product List. Documents are available at...

From Product to Service Design: A Thinking Paradigm Shift

Directory of Open Access Journals (Sweden)

Liliana Rodriguez

2014-12-01

Full Text Available Society, industry and the economy are all experiencing changes caused by a shift from products to services. While a “problem-solving” approach is commonly used for the development of products, new design approaches are needed as the primary unit of exchange moves from goods to services.  This research argues that a fundamental transformation in the design world is taking place, manifested in a thinking paradigm shift from problem solving (designing products towards systems thinking (designing services. This paper draws on design literature to identify concepts of systems thinking and problem solving to help understand core elements in the shift from product to service design. It also reports on a series of semi-structured interviews with designers working in five design consultancies that have moved from product design to services design. The results show a change in the way designers think and approach projects when facing the challenges of designing services, confirming a movement from problem solving to systems thinking. However, systems thinking is not replacing problem solving but complementing it. The results also indicate that the growing complexity of the issues designers deal with influences the adoption of systems thinking in responding to service design challenges, as well as current changes in people’s ideas about sustainability and  society.

The Significance of Farm Size in the Evaluation of Labour Productivity in Agriculture

Directory of Open Access Journals (Sweden)

Martina Novotná

2016-01-01

Full Text Available The paper deal with the analysis of difference in labour productivity of farms categorised according to their size, to determine if the set subsidy system influences labour productivity in the size groups of the farms. The source of data for enterprises analysis was the firms database, which contains accounting data of 926 farms with at least one employee. The observed data were from the 6 year period (2007–2012. The farms were divided, according to their size into four categories defined by the European Commission: micro, small, medium and large enterprises. The analysis of the labour productivity I based on the added value and labour costs revealed that there are big differences of the labour productivity levels in particular size groups of farms. The further analysis revealed that an adjustment of the farm approach of the labour productivity, when the paid operation subsidies are added (labour productivity II, changes this conclusion and the differences between particular size groups of farms decreased. Using σ-convergence, it was proved that the relative variability of the labour productivity II values decreased significantly in the case of the medium-sized farms. We can say that subsidies significantly influence the labour productivity in farms. On one hand, there is decrease of differences between the level values of particular size groups of farms; on the other hand, there is no significant decrease its variability (except the medium-sized farms.

Public services management and co-production: a necessity, a fashion or a new public service ethos?

OpenAIRE

M. Andreani; E. Guarini; R. Ruffini; A. Sancino; M. Sicilia

2013-01-01

This paper aims at investigating the drivers of user/citizen involvement in the public service provision, the formal and informal co-production structures, the roles played by public managers in order to support co-production. We study the case of Lombardy Region (Italy) that is experiencing co-production of services for autistic people. This case allows us to analyze co-production across all the stages of the service cycle. Indeed, both users and public and third sector organizations are...

Product with service, technology with business model

DEFF Research Database (Denmark)

Sakao, Tomohiko; McAloone, Tim C.

2011-01-01

Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

Assessing customer satisfaction for improving NOAA's climate products and services

Science.gov (United States)

Meyers, J. C.; Hawkins, M. D.; Timofeyeva, M. M.

2009-12-01

NOAA's National Weather Service (NWS) Climate Services Division (CSD) is developing a comprehensive climate user requirements process with the ultimate goal of producing climate services that meet the needs of NWS climate information users. An important part of this effort includes engaging users through periodical surveys conducted by the Claes Fornell International (CFI) Group using the American Customer Satisfaction Index (ACSI). The CFI Group conducted a Climate Services Satisfaction (CSS) Survey in May of 2009 to measure customer satisfaction with current products and services and to gain insight on areas for improvement. The CSS Survey rates customer satisfaction on a range of NWS climate services data and products, including Climate Prediction Center (CPC) outlooks, drought monitoring, and ENSO monitoring and forecasts, as well as NWS local climate data services. In addition, the survey assesses the users of the products to give the NWS insight into its climate customer base. The survey also addresses specific topics such as NWS forecast category names, probabilistic nature of climate products, and interpretation issues. The survey results identify user requirements for improving existing NWS climate services and introducing new ones. CSD will merge the survey recommendations with available scientific methodologies and operational capabilities to develop requirements for improved climate products and services. An overview of the 2009 survey results will be presented, such as users' satisfaction with the accuracy, reliability, display and functionality of products and services.

Tactical Production and Lot Size Planning with Lifetime Constraints

DEFF Research Database (Denmark)

Raiconi, Andrea; Pahl, Julia; Gentili, Monica

2017-01-01

In this work, we face a variant of the capacitated lot sizing problem. This is a classical problem addressing the issue of aggregating lot sizes for a finite number of discrete periodic demands that need to be satisfied, thus setting up production resources and eventually creating inventories...

How Offshoring Elicits Reconfiguration of the Service Production System

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

Service production systems can be seen as a structure consisting of task execution, resources executing tasks and the service output received by the client. Offshoring acts as an exogenous shock to such a service production system. Drawing on practice theory and applying a multiple case methodology...... of the impact of offshoring and to practice theory....

The effect of backroom size on retail product availability – operational and technological solutions

Directory of Open Access Journals (Sweden)

Nikola Milićević

2015-05-01

Full Text Available Amid the conditions of increasingly fierce competition, retailers are doing their best to meet the demands of their customers as efficiently as possible. Through the ever-growing level of product availability they raise the quality of service, which is positively reflected not only on the growth in sales, but also customer satisfaction. In the opposite case, the out-ofstock problem emerges, affecting not only customers, but also retailers and their suppliers. Bearing in mind, that the causes of the given problem occur most frequently in the last metres of the supply chain, in this paper we investigated the effect of backroom size on product availability, depending on the retail format. For this purpose, we used moderated regression analysis on the sample of 80 fast moving consumer goods in retail stores located on the territory of the Republic of Serbia. The obtained results pointed to opposite movements in the smallest and the largest format. Whereas in superettes the out-of-stock level lowers with the increase in the backroom size, it tends to drop in hypermarkets. Therefore, we pointed to some in-store problems that cause product stock-outs in different store formats. In addition to indicating the potential causes of analyzed relations, this paper also presents certain operational and technological solutions related to their mitigation.

Size Matters — Determinants of Modern, Community-Oriented Mental Health Services

Science.gov (United States)

Ala-Nikkola, Taina; Pirkola, Sami; Kontio, Raija; Joffe, Grigori; Pankakoski, Maiju; Malin, Maili; Sadeniemi, Minna; Kaila, Minna; Wahlbeck, Kristian

2014-01-01

Governances, structures and contents of mental health services are being reformed across countries. There is a need for data to support those changes. The aim of this study was to explore the quality, i.e., diversity and community orientation, and quantity, i.e., personnel resources, of mental health and substance abuse services (MHS) and evaluate correlation between population needs and quality and quantity of MHS. The European Service Mapping Schedule—Revised (ESMS-R) was used to classify mental health and substance abuse services in southern Finland. Municipal-level aggregate data, local data on unemployment rate, length of education, age of retirement, proportion of single households, alcohol sales and a composite mental health index were used as indicators of population mental health needs. Population size correlated strongly with service diversity, explaining 84% of the variance. Personnel resources did not associate with diversity or community orientation. The indicators of mental health services need did not have the expected association with quality and quantity of services. In terms of service organization, the results may support larger population bases, at least 150,000 adult inhabitants, when aiming for higher diversity. PMID:25153471

Pricing of Marine Products and Services in the Modular Age

DEFF Research Database (Denmark)

Jiang, Liping; Al-Ajlouni, Omar

WHAT IS THE ISSUE? Pricing can be a particular challenging issue for marine suppliers with multiple products and services especially when suppliers want to address specific customer needs and at the same time achieves the efficiency in pricing. WHY IS IT IMPORTANT? Appropriate pricing of products-and-services...... in the market. Lastly, customer satisfaction and loyalty will be increased accordingly. WHAT CAN BE DONE? The pricing challenge for multiple products and services can be overcome by applying the modular concept on pricing, where each product or service is offered as a module, so suppliers can either set...

Price and Service Competition between New and Remanufactured Products

Directory of Open Access Journals (Sweden)

Bin Wang

2015-01-01

Full Text Available This paper sets two manufacturers on the market. One is traditional manufacturer, which produces new products, and the other remanufactures by recycling used products. Two manufacturers sell products to customers through one retailer and also provide product-related services. Three participators decide prices and service levels independently. We discuss the optimal decision of prices, service levels, demands, and profits in three scenarios: Manufacturers Stackelberg, Retailer Stackelberg, and Nash Equilibrium. We also study the influence of customer acceptance of remanufactured product (θ on participators’ decisions. With the increase of θ, new product profit reduces; remanufactured product profit increases at the beginning and then decreases. Retailer profit grows steadily. In Manufacturers Stackelberg, new and remanufactured products can get the maximum profits, and retailer only has the minimum profit. In Retailer Stackelberg, retailer can get the maximum profit; new product only has the minimum profit and remanufactured product has the medium gain. In Nash Equilibrium, new product and retailer have the medium gains, and remanufactured product has the minimum profit.

Service Co-Production, Customer Efficiency and Market Competition

OpenAIRE

Mei Xue; Patrick T. Harker

2003-01-01

Customers’ participation in service co-production processes has been increasing with the rapid development of self-service technologies and business models that rely on self-service as the main service delivery channel. However, little is known about how the level of participation of customers in service delivery processes influences the competition among service providers. In this paper, a game-theoretic model is developed to study the competition among service providers when selfservice is ...

Linking Ecosystem Services Benefit Transfer Databases and Ecosystem Services Production Function Libraries

Science.gov (United States)

The quantification or estimation of the economic and non-economic values of ecosystem services can be done from a number of distinct approaches. For example, practitioners may use ecosystem services production function models (ESPFMs) for a particular location, or alternatively, ...

National Marine Fisheries Service Grain Size Data from the Baltimore Canyon Trough

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Grain size analyses produced by Robert Reid of the NOAA National Marine Fisheries Service for the NOAA/BLM Outer Continental Shelf Mid-Atlantic Project, Baltimore...

Services Sector Development and Improving Production Network in ASEAN

OpenAIRE

Yose Rizal Damuri

2014-01-01

While the importance of services sector in creating value added and employment has been recognized, the role of services as providers of major inputs to production sector are often forgotten and overlooked. This paper stresses the importance of services sector in supporting economic activities in general; the role that has become increasingly more critical in the wake of global production network. It argues that development of the services sector is crucial to supporting an economy’s partic...

From products to services : reflections on the challenges in designing for services

NARCIS (Netherlands)

Bhomer, ten M.; De Lille, C. S. H.; Tomico, O.; Kleinsmann, M.S.

2013-01-01

In this paper we will point to implications for designers who support organizations in the transition process from products to services based business models. These implications are based on four important challenges when designing for services: the designerly mindset, collaboration, empathy with

Product Lines for Service Oriented Applications - PL for SOA

Directory of Open Access Journals (Sweden)

Maurice H. ter Beek

2011-08-01

Full Text Available PL for SOA proposes, formally, a software engineering methodology, development techniques and support tools for the provision of service product lines. We propose rigorous modeling techniques for the specification and verification of formal notations and languages for service computing with inclinations of variability. Through these cutting-edge technologies, increased levels of flexibility and adaptivity can be achieved. This will involve developing semantics of variability over behavioural models of services. Such tools will assist organizations to plan, optimize and control the quality of software service provision, both at design and at run time by making it possible to develop flexible and cost-effective software systems that support high levels of reuse. We tackle this challenge from two levels. We use feature modeling from product line engineering and, from a services point of view, the orchestration language Orc. We introduce the Smart Grid as the service product line to apply the techniques to.

Integrating service and design : The influences of organizational and communication factors on relative product and service characteristics

NARCIS (Netherlands)

Antioco, M.; Moenaert, R.K.; Feinberg, R.A.; Wetzels, M.

2008-01-01

The aim of this study is to identify the organizational and communication antecedents, and evaluate the consequences on relative product and service characteristics, of the use of service-sourced information by product designers during new product development. An empirical study of 121 product

Economic production quantity models for imperfect product and service with rework

OpenAIRE

Tai, Allen H.

2012-01-01

When imperfect quality products are produced in a production process, rework may be performed to make them become serviceable. In an inventory system, items may deteriorate. Selling deteriorated items to customers will create negative impact on corporate image. In this paper, two economic production quantity (EPQ) models are proposed for deteriorating items with rework process. A single production-rework plant system and a system consists of $n$ production plants and one rework plant are cons...

MODIS Collection 6 Land Product Subsets Web Service

Data.gov (United States)

National Aeronautics and Space Administration — The MODIS Web Service provides data access capabilities for Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6 land products. The web service...

Opportunity parameters in the development of Product/Service-Systems

DEFF Research Database (Denmark)

Matzen, Detlef; Andreasen, Mogens Myrup

2006-01-01

In the light of the current focus on innovative business development throughout industry and society, the concept of product/service-systems (PSS) is a promising approach to product development, which may yield product offers that benefit the company, customer and society alike. Only recently...... while maintaining a high level of need satisfaction [Mont 2004]. The enhancement of goods with the provision of services has been practised in some industrial sectors for decades, mainly based on maintenance deliveries to capital investments in B2B settings. Researchers working with these business....../service-oriented strategy we believe companies can deliver superior value solutions and ensure more optimal utilisation of resources by aligning operations with their customers compared to traditional product-oriented offers. The corresponding integration is not reflected in existing models and processes of product...

Measurement framework for product service system performance of generator set distributors

Science.gov (United States)

Sofianti, Tanika D.

2017-11-01

Selling Generator Set (Genset) in B2B market, distributors assisted manufacturers to sell products. This is caused by the limited resources owned by the manufacturer for adding service elements. These service elements are needed to enhance the competitiveness of the generator sets. Some genset distributors often sell products together with supports to their customers. Industrial distributor develops services to meet the needs of the customer. Generator set distributors support machines and equipment produced by manufacturer. The services delivered by the distributors could enhance value obtained by the customers from the equipment. Services provided to customers in bidding process, ordering process of the equipment from the manufacturer, equipment delivery, installations, and the after sales stage. This paper promotes framework to measure Product Service System (PSS) of Generator Set distributors in delivering their products and services for the customers. The methodology of conducting this research is by adopting the perspective of the providers and customers and by taking into account the tangible and intangible products. This research leads to the idea of improvement of current Product Service System of a Genset distributor. This research needs further studies in more detailed measures and the implementation of measurement tools.

Monitoring Users' Satisfactions of the NOAA NWS Climate Products and Services

Science.gov (United States)

Horsfall, F. M.; Timofeyeva, M. M.; Dixon, S.; Meyers, J. C.

2011-12-01

The NOAA's National Weather Service (NWS) Climate Services Division (CSD) ensures the relevance of NWS climate products and services. There are several ongoing efforts to identify the level of user satisfaction. One of these efforts includes periodical surveys conducted by Claes Fornell International (CFI) Group using the American Customer Satisfaction Index (ACSI), which is "the only uniform, national, cross-industry measure of satisfaction with the quality of goods and services available in the United States" (http://www.cfigroup.com/acsi/overview.asp). The CFI Group conducted NWS Climate Products and Services surveys in 2004 and 2009. In 2010, a prominent routine was established for a periodical assessment of the customer satisfaction. From 2010 onward, yearly surveys will cover major climate services products and services. An expanded suite of climate products will be surveyed every other year. Each survey evaluated customer satisfaction with a range of NWS climate services, data, and products, including Climate Prediction Center (CPC) outlooks, drought monitoring, and ENSO monitoring and forecasts, as well as NWS local climate data and forecast products and services. The survey results provide insight into the NWS climate customer base and their requirements for climate services. They also evaluate whether we are meeting the needs of customers and the ease of their understanding for routine climate services, forecasts, and outlooks. In addition, the evaluation of specific topics, such as NWS forecast product category names, probabilistic nature of climate products, interpretation issues, etc., were addressed to assess how our users interpret prediction terminology. This paper provides an analysis of the following products: hazards, extended-range, long-lead and drought outlooks, El Nino Southern Oscillation monitoring and predictions as well as local climate data products. Two key issues make comparing the different surveys challenging, including the

Food and disturbance effects on Arctic benthic biomass and production size spectra

Science.gov (United States)

Górska, Barbara; Włodarska-Kowalczuk, Maria

2017-03-01

Body size is a fundamental biological unit that is closely coupled to key ecological properties and processes. At the community level, changes in size distributions may influence energy transfer pathways in benthic food webs and ecosystem carbon cycling; nevertheless they remain poorly explored in benthic systems, particularly in the polar regions. Here, we present the first assessment of the patterns of benthic biomass size spectra in Arctic coastal sediments and explore the effects of glacial disturbance and food availability on the partitioning of biomass and secondary productivity among size-defined components of benthic communities. The samples were collected in two Arctic fjords off west Spitsbergen (76 and 79°N), at 6 stations that represent three regimes of varying food availability (indicated by chlorophyll a concentration in the sediments) and glacial sedimentation disturbance intensity (indicated by sediment accumulation rates). The organisms were measured using image analysis to assess the biovolume, biomass and the annual production of each individual. The shape of benthic biomass size spectra at most stations was bimodal, with the location of a trough and peaks similar to those previously reported in lower latitudes. In undisturbed sediments macrofauna comprised 89% of the total benthic biomass and 56% of the total production. The lower availability of food resources seemed to suppress the biomass and secondary production across the whole size spectra (a 6-fold decrease in biomass and a 4-fold decrease in production in total) rather than reshape the spectrum. At locations where poor nutritional conditions were coupled with disturbance, the biomass was strongly reduced in selected macrofaunal size classes (class 10 and 11), while meiofaunal biomass and production were much higher, most likely due to a release from macrofaunal predation and competition pressure. As a result, the partitioning of benthic biomass and production shifted towards meiofauna

PREFER: a European service providing forest fire management support products

Science.gov (United States)

Eftychidis, George; Laneve, Giovanni; Ferrucci, Fabrizio; Sebastian Lopez, Ana; Lourenco, Louciano; Clandillon, Stephen; Tampellini, Lucia; Hirn, Barbara; Diagourtas, Dimitris; Leventakis, George

2015-06-01

PREFER is a Copernicus project of the EC-FP7 program which aims developing spatial information products that may support fire prevention and burned areas restoration decisions and establish a relevant web-based regional service for making these products available to fire management stakeholders. The service focuses to the Mediterranean region, where fire risk is high and damages from wildfires are quite important, and develop its products for pilot areas located in Spain, Portugal, Italy, France and Greece. PREFER aims to allow fire managers to have access to online resources, which shall facilitate fire prevention measures, fire hazard and risk assessment, estimation of fire impact and damages caused by wildfire as well as support monitoring of post-fire regeneration and vegetation recovery. It makes use of a variety of products delivered by space borne sensors and develop seasonal and daily products using multi-payload, multi-scale and multi-temporal analysis of EO data. The PREFER Service portfolio consists of two main suite of products. The first refers to mapping products for supporting decisions concerning the Preparedness/Prevention Phase (ISP Service). The service delivers Fuel, Hazard and Fire risk maps for this purpose. Furthermore the PREFER portfolio includes Post-fire vegetation recovery, burn scar maps, damage severity and 3D fire damage assessment products in order to support relative assessments required in context of the Recovery/Reconstruction Phase (ISR Service) of fire management.

A guide for evaluating the environmental performance of Product/Service-Systems

DEFF Research Database (Denmark)

Kjær, Louise Laumann; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

Environmental issues, such as climate change, resource depletion and pollution are societal concerns, which are also increasingly affecting the way we do business. Concepts such as circular economy,sharing economy, and service economy, often highlight that more sustainable businesses can be created...... when focusing on product performance (e.g.by offering lighting as a service) rather than the physical products (e.g. by selling light bulbs). Such strategies of integrating products and services to deliver required user functionality are often termed Product/Service-Systems (PSS). This guide...

Increasing innovation capability:of product-service systems through collaborative networks

OpenAIRE

Wallin, Johanna

2011-01-01

Many manufacturing industries are undergoing a transition from manufacturing of products towards integrating more services into the traditional product concepts and provide product-service systems (PSS). Development of PSS changes the focus from the product to the functionality of the product; hence it can be referred to as functional product development. PSS also puts focus on the value of the knowledge-intensive solution. This change in focus challenges the way companies innovate. When deve...

Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

Directory of Open Access Journals (Sweden)

Jaime Salazar

2014-01-01

Full Text Available Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals.

78 FR 12801 - New Postal Product; Negotiated Service Agreement

Science.gov (United States)

2013-02-25

... the United States Postal Service to Add Parcel Return Service Contract 3 to Competitive Product List... Commission is noticing a recently-filed Postal Service request to add Parcel Return Service Contract 3 to the....30 et seq., the Postal Service filed a request and associated supporting information to add Parcel...

Services trade restrictiveness and manufacturing productivity : the role of institutions

OpenAIRE

BEVERELLI, Cosimo; FIORINI, Matteo; HOEKMAN, Bernard M.

2015-01-01

We study the effect of services trade restrictiveness on manufacturing productivity for a broad cross-section of countries at different stages of economic development. Decreasing services trade restrictiveness has a positive indirect impact on the manufacturing sectors that use services as intermediate inputs in production. We identify a critical role of local institutions in shaping this effect: countries with high institutional capacity benefit the most from services trade policy reforms in...

5th CIRP international conference on industrial product-service systems

CERN Document Server

2013-01-01

“An Industrial Product-Service System is characterized by the integrated and mutually  determined planning, development, provision and use of product and service shares including its immanent software components in Business-to-Business applications and represents a knowledge-intensive socio-technical system.” – Meier, Roy, Seliger (2010) Since the first conference in 2009, the CIRP International Conference on Industrial Product-Service Systems has become a well-established international forum for the review and discussion of advances, research results and industrial improvements. Researchers from all over the world have met at previous IPS² conferences in Cranfield (2009), Linköping (2010), Braunschweig (2011) and Tokyo (2012). In 2013, the 5th CIRP International Conference on Industrial Product-Service Systems is held in Bochum. Important topics of IPS² research presented at the conference are: planning and development, sustainability, business models, operation, service engineering, knowledge mana...

Birth order, family size, and children's use of physician services.

Science.gov (United States)

Tessler, R

1980-01-01

The purpose of this study is to separate out the effects of number of siblings and birth order on children's use of physician services. Prior research has consistently revealed an inverse relationship between family size and physician visits, but the possible confounding influence of the child's ordinal position in the family has been ignored. Later born children may be taken to the doctor less often than first and other early borns because of their parents' increasing knowledgeability in regard to child care as well as their growing understanding of the uses and limitations of physician visits. On the assumption that part of the family size effect observed in prior research may have been due to the clustering of first and early borns in small families, an inverse relationship between birth order and physician utilization is hypothesized. Support for this hypothesis comes from an empirical study of 1,665 children from 587 families in which variation in family size is statistically controlled. PMID:7372499

The influence of CEO gender on market orientation and performance in service small and medium-sized service businesses

NARCIS (Netherlands)

Davis, Peter S.; Babakus, Emin; Englis-Danskin, Paula; Pett, Tim

2010-01-01

This study examines the effects of CEO gender on market orientation and performance (growth and profitability) among a sample of small and medium-sized service businesses. Gender was found to have significant indirect effects (via market orientation) on both market performance (growth) and financial

Rutile nanopowders for pigment production: Formation mechanism and particle size prediction

Science.gov (United States)

Zhang, Wu; Tang, Hongxin

2018-01-01

Formation mechanism and particle size prediction of rutile nanoparticles for pigment production were investigated. Anatase nanoparticles were observed by oriented attachment with parallel lattice fringe spaces of 0.2419 nm. Upon increasing the calcination temperature, the (1 1 0) plane of rutile was gradually observed, suggesting that the anatase (1 0 3) planes undergo internal structural rearrangement of oxygen and titanium ions into rutile phase due to ionic diffusion. Backpropagation neural network was used to predict particle size of rutile nanopowders, the prediction errors were all smaller than 2%, providing an efficient method to control particle size in pigment production.

Technology Licensing Strategy for Network Product in a Service Industry

Directory of Open Access Journals (Sweden)

Xianpei Hong

2015-01-01

Full Text Available Technology licensing has gained significant attention in literature and practice as a rapid and effective way to improve firm’s capability of technology innovation. In this paper, we investigate a duopolistic service provider competition market, where service providers develop and sell a kind of network product. In this setting, we analyze the innovating service provider’s four licensing strategies: no licensing, fixed fee licensing, royalty licensing, and two-part tariff licensing. The literature suggests that when the network products can be completely substituted, two-part tariff licensing is the optimal strategy of the innovating service provider. We find that when the network products cannot be completely substituted, two-part tariff licensing is not always optimal. The degree of the product differentiation, the intensity of the network effects, and the R&D cost of the potential licensee play a key role in determining the innovating service provider’s optimal licensing strategies.

The economic production lot size model extended to include more than one production rate

DEFF Research Database (Denmark)

Larsen, Christian

2005-01-01

production rates should be chosen in the interval between the demand rate and the production rate which minimizes unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed-form expressions for all optimal runtimes as well as the minimum average cost....... This analysis reveals that it is the size of the setup cost that determines the need for being able to use several production rates. We also show how to derive a near-optimal solution of the general problem....

Lessons from empirical studies in product and service variety management.

Directory of Open Access Journals (Sweden)

Andrew C.L. Lyons

2013-07-01

Full Text Available For many years, a trend for businesses has been to increase market segmentation and extend product and service-variety offerings in order to provid more choice for customers and gain a competitive advantags. However, there have been relatively few variety-related, empirical studies that have been undertaken. In this research, two empirical studies are presented that address the impact of product and service variety on business and business function performance. In the first (service-variety study, the focus concerns the relationship between service provision offered by UK-based, third-party logistics (3PL providers and the operational and financial performance of those providers. Here, the results of a large survey identify the  most important services offered by 3PLs and the most important aspects of 3PL operational performance. Also, the research suggests that the range of service variety offered by 3PLs does not directly influence the 3PLs’ financial performance. The second (product-variety study presents the findings from an analysis of data from 163 manufacturing plants where the impact of product variety on the performance of five business functions is examined. An increase in product variety was found to influence business functions differently depending on the combination of customisation and variety offered to customers

The economic production lot size model extended to include more than one production rate

DEFF Research Database (Denmark)

Larsen, Christian

2001-01-01

btween the demand rate and the production rate which minimizes unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed-form expressions for all optimal runtimes as well as the minimum average cost. This analysis reveals that it is the size...... of the setup cost that determines the need for being able to use several production rates. Finally, we show how to derive a near-optimal solution of the general problem....

Production, depreciation and the size distribution of firms

Science.gov (United States)

Ma, Qi; Chen, Yongwang; Tong, Hui; Di, Zengru

2008-05-01

Many empirical researches indicate that firm size distributions in different industries or countries exhibit some similar characters. Among them the fact that many firm size distributions obey power-law especially for the upper end has been mostly discussed. Here we present an agent-based model to describe the evolution of manufacturing firms. Some basic economic behaviors are taken into account, which are production with decreasing marginal returns, preferential allocation of investments, and stochastic depreciation. The model gives a steady size distribution of firms which obey power-law. The effect of parameters on the power exponent is analyzed. The theoretical results are given based on both the Fokker-Planck equation and the Kesten process. They are well consistent with the numerical results.

A product-service system approach to telehealth application design.

Science.gov (United States)

Flores-Vaquero, Paul; Tiwari, Ashutosh; Alcock, Jeffrey; Hutabarat, Windo; Turner, Chris

2016-06-01

A considerable proportion of current point-of-care devices do not offer a wide enough set of capabilities if they are to function in any telehealth system. There is a need for intermediate devices that lie between healthcare devices and service networks. The development of an application is suggested that allows for a smartphone to take the role of an intermediate device. This research seeks to identify the telehealth service requirements for long-term condition management using a product-service system approach. The use of product-service system has proven to be a suitable methodology for the design and development of telehealth smartphone applications. © The Author(s) 2014.

Innovation in product and services in the shipping retrofit industry

DEFF Research Database (Denmark)

Hermann, Roberto Rivas; Köhler, Jonathan

regulation could create innovation in green products and services in the maritime retrofitting industry?” Our case study focus on business models for the development, installation and operation of ballast water management systems in Denmark. We engaged the perspectives of ship-owners, equipment manufacturers....... Similarly, given the deindustrialisation dynamics to regions with lower manufacturing costs, it is argued that a combination of knowledge intensive and service-based economy will eventually fill the gap left by manufacturing industries. To create added value to their products, some leading firms...... are increasingly developing product-service systems. It is however, argued that product-service systems are not always sustainable, and thus little evidence connect them with green growth. To fill in this gap, we are carrying a case study guided by the following research question: “How the ballast water treatment...

77 FR 7489 - Small Business Size Standards: Professional, Technical, and Scientific Services

Science.gov (United States)

2012-02-10

... would (1) provide a competitive advantage to larger firms over their truly small counterparts; (2) allow... Vol. 77 Friday, No. 28 February 10, 2012 Part V Small Business Administration 13 CFR Part 121 Small Business Size Standards: Professional, Technical, and Scientific Services; Final Rule #0;#0...

76 FR 2930 - Product Change-Parcel Select Negotiated Service Agreement

Science.gov (United States)

2011-01-18

... POSTAL SERVICE Product Change--Parcel Select Negotiated Service Agreement AGENCY: Postal Service... INFORMATION: The United States Postal Service[reg] hereby gives notice that on December 23, 2010, it filed with the Postal Regulatory [[Page 2931

The influences of impurity content, tensile strength, and grain size on in-service temper embrittlement of CrMoV steels

International Nuclear Information System (INIS)

Cheruvu, N.S.; Seth, B.B.

1989-01-01

The influences of impurity levels, grain size, and tensile strength on in-service temper embrittlement of CrMoV steels have been investigated. The samples for this study were taken from steam turbine CrMoV rotors which had operated for 15 to 26 years. The effects of grain size and tensile strength on embrittlement susceptibility were separated by evaluating the embrittlement behavior of two rotor forgings made from the same ingot after an extended step-cooling treatment. Among the residual elements in the steels, only P produces a significant embrittlement. The variation of P and tensile strength has no effect on in-service temper embrittlement susceptibility, as measured by the shift in fracture appearance transition temperature (FATT). However, the prior austenite grain size plays a major role in service embrittlement. The fine grain steels with a grain size of ASTM No. 9 or higher are virtually immune to in-service embrittlement. In steels having duplex grain sizes, embrittlement susceptibility is controlled by the size of coarser grains. For a given steel chemistry, the coarse grain steel is more susceptible to in-service embrittlement, and a decrease in ASTM grain size number from 4 to 0/1 increases the shift in FATT by 61 degrees C (10/10 degrees F). It is demonstrated that long-term service embrittlement can be simulated, except in very coarse grain steels, by using the extended step-cooling treatment. The results of step-cooling studies show that the coarse grain rotor steels take longer time during service to reach a fully embrittled state than the fine grain rotor steels

Size- and food-dependent growth drives patterns of competitive dominance along productivity gradients.

Science.gov (United States)

Huss, Magnus; Gårdmark, Anna; Van Leeuwen, Anieke; de Roos, André M

2012-04-01

Patterns of coexistence among competing species exhibiting size- and food-dependent growth remain largely unexplored. Here we studied mechanisms behind coexistence and shifts in competitive dominance in a size-structured fish guild, representing sprat and herring stocks in the Baltic Sea, using a physiologically structured model of competing populations. The influence of degree of resource overlap and the possibility of undergoing ontogenetic diet shifts were studied as functions of zooplankton and zoobenthos productivity. By imposing different size-dependent mortalities, we could study the outcome of competition under contrasting environmental regimes representing poor and favorable growth conditions. We found that the identity of the dominant species shifted between low and high productivity. Adding a herring-exclusive benthos resource only provided a competitive advantage over sprat when size-dependent mortality was high enough to allow for rapid growth in the zooplankton niche. Hence, the importance of a bottom-up effect of varying productivity was dependent on a strong top-down effect. Although herring could depress shared resources to lower levels than could sprat and also could access an exclusive resource, the smaller size at maturation of sprat allowed it to coexist with herring and, in some cases, exclude it. Our model system, characterized by interactions among size cohorts, allowed for consumer coexistence even at full resource overlap at intermediate productivities when size-dependent mortality was low. Observed shifts in community patterns were crucially dependent on the explicit consideration of size- and food-dependent growth. Accordingly, we argue that accounting for food-dependent growth and size-dependent interactions is necessary to better predict changes in community structure and dynamics following changes in major ecosystem drivers such as resource productivity and mortality, which are fundamental for our ability to manage exploitation of

77 FR 28410 - Product Change-Parcel Select Negotiated Service Agreement

Science.gov (United States)

2012-05-14

... filed with the Postal Regulatory Commission a Request of the United States Postal Service to Add Parcel... POSTAL SERVICE Product Change--Parcel Select Negotiated Service Agreement AGENCY: Postal Service\\TM\\. ACTION: Notice. SUMMARY: The Postal Service gives notice of filing a request with the Postal...

Assessing product service systems (PSS)

DEFF Research Database (Denmark)

Hsuan, Juliana; McAloone, Tim C.; Neugebauer, Line

We apply a management tool to classify different integrated PSS within the context of Danish maritime industry. We investigate how a firm should organize its operations to manage the transition from being a manufacturing to a servitizing company, and to provide a guideline for strategic positioni...... and planning of the balance between product sales and service activities....

The Impact of Product Assortment Size and Attribute Quantity on Information Searches

DEFF Research Database (Denmark)

Dörnyei, Krisztina Rita; Chrysochou, Polymeros; Krystallis, Athanasios

2017-01-01

Purpose: This paper investigates the impact of assortment size and attribute quantity on the depth and content of consumer information searches. Design/methodology/approach: For a computer-aided experiment using an information display board, participants (n=393) were placed in a simulated shopping...... situation that involved choosing a product among three sets of frequently purchased, low-involvement, FMCG alternatives. Findings: The findings show that when the assortment size increases, consumers acquire information from more products and cues but sacrifice product attributes. In particular...

4th CIRP International Conference on Industrial Product-Service Systems

CERN Document Server

Kimita, Koji

2013-01-01

Industrial Product-Service Systems (IPS2), which is defined as “an integrated industrial product and service offering that delivers value in use,” has expanded rapidly over the last decade. IPS2 has allowed us to achieve both high added value and high productivity and has enriched our QOL by improving the performance of products and services. We are now struggling with many awkward issues related to sustainability, but IPS2 is expected to be the “philosopher’s stone” for solving these issues. Following the pattern of conferences held in Cranfield in 2009, Linköping in 2010, and Braunschweig in 2011, the fourth International CIRP Conference on Industrial Product-Service Systems, held on November 8-9, 2012, in Tokyo, will cover various aspects of IPS2. Topics planned for this year’s conference reflect the latest IPS2 information in both the natural sciences and humanities and include case studies from various industries. IPS2 is still a relatively new field, so it is important to keep track of the ...

77 FR 58185 - New Postal Product

Science.gov (United States)

2012-09-19

... POSTAL REGULATORY COMMISSION [Docket No. CP2012-56; Order No. 1464] New Postal Product AGENCY... Service request to add a Global Expedited Package Services contract to the competitive product list. This... contracts are small- or medium-size businesses that mail products directly to foreign destinations using...

Production of stocker-size hybrid tilapia in an outdoor biofloc production system

Science.gov (United States)

Production efficiency per unit volume of water can be improved when stocking rate is adjusted to allow rapid growth of the culture organism to the desired target weight. Fingerlings often are grown to stocker size (ca. 100-150 g/fish) at high stocking rates and then the population is thinned to allo...

Queue Length and Server Content Distribution in an Infinite-Buffer Batch-Service Queue with Batch-Size-Dependent Service

Directory of Open Access Journals (Sweden)

U. C. Gupta

2015-01-01

Full Text Available We analyze an infinite-buffer batch-size-dependent batch-service queue with Poisson arrival and arbitrarily distributed service time. Using supplementary variable technique, we derive a bivariate probability generating function from which the joint distribution of queue and server content at departure epoch of a batch is extracted and presented in terms of roots of the characteristic equation. We also obtain the joint distribution of queue and server content at arbitrary epoch. Finally, the utility of analytical results is demonstrated by the inclusion of some numerical examples which also includes the investigation of multiple zeros.

Consumer Intervention Mapping—A Tool for Designing Future Product Strategies within Circular Product Service Systems

Directory of Open Access Journals (Sweden)

Matt Sinclair

2018-06-01

Full Text Available Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption, lower transport emissions and extend product lifetimes. At the same time smart products within the Internet of Things will gather and report data on user behaviour and product status. Many sustainable design tools have previously been developed but few are able to imagine and develop visions of how future sustainable product service systems might be manifested. This paper introduces the concept of Consumer Intervention Mapping as a tool for creating future product strategies. The tool visualises the points within a product’s lifecycle where stakeholders are able to intervene in the product’s expected journey. This perspective enables the rapid construction of scenarios that explore and describe future circular product service systems. Validation of the tool in three workshops is described and the outcomes are presented. Consumer Intervention Mapping is successful in creating scenarios that describe existing product service systems and new product concepts adapted to a Circular Economy paradigm. Further work is required to refine the tool’s performance in more focused and reflective design exercises.

Product service systems and sustainable mobility : An electric vehicle introduction case

NARCIS (Netherlands)

Beella, S.K.; Silvester, S.; Brezet, J.C.; Van Timmeren, A.; Bauer, P.; Quist, J.; Van Dijk, S.

2010-01-01

A product service system (PSS) is a function-oriented business model aimed at providing sustainability of both consumption and production. A PSS is defined as a marketable set of products and services capable of jointly fulfilling user needs. In theory PSSs are normally shown realized with smart

Returns to Scale in the Production of Hospital Services

Science.gov (United States)

Berry, Ralph E.

1967-01-01

The primary purpose of this article is to investigate whether or not economies of scale exist in the production of hospital services. In previous studies the results have implied the existence of economies of scale, but the question has not been satisfactorily resolved. The factor most responsible for clouding the issue is the overwhelming prevalence of product differences in the outputs of hospitals. In this study a method which avoids the problem of product differentiation is developed. The analysis strongly supports the conclusion that hospital services are produced subject to economies of scale. PMID:6054380

Typology of Uncertainties in the Development Process of Product-Service Systems

DEFF Research Database (Denmark)

Ramirez Hernandez, Tabea; Kreye, Melanie; Pigosso, Daniela Cristina Antelmi

This paper investigates uncertainty in the development of Product-Service Systems (PSS) – a complex combination of product and services. This research is important because practitioners struggle with managing the high uncertainties arising from the complexity of parallel product and service...... development in compound clusters of stakeholders. Yet, scholars have not analyzed these challenges extensively. Based on a combination of innovation management and servitization literature a conceptual framework is offered, detailing five uncertainty types relevant for PSS-development: environmental...

Effects of dimensional size and surface roughness on service performance for a micro Laval nozzle

International Nuclear Information System (INIS)

Cai, Yukui; Liu, Zhanqiang; Shi, Zhenyu

2017-01-01

Nozzles with large and small dimensions are widely used in various industries. The main objective of this research is to investigate the effects of dimensional size and surface roughness on the service performance of a micro Laval nozzle. The variation of nozzle service performance from the conventional macro to micro scale is presented in this paper. This shows that the dimensional nozzle size has a serious effect on the nozzle gas flow friction. With the decrease of nozzle size, the velocity performance and thrust performance deteriorate. The micro nozzle performance has less sensitivity to the variation of surface roughness than the large scale nozzle does. Surface quality improvement and burr prevention technologies are proposed to reduce the friction effect on the micro nozzle performance. A novel process is then developed to control and depress the burr generation during micro nozzle machining. The polymethyl-methacrylate as a coating material is coated on the rough machined surface before finish machining. Finally, the micro nozzle with a throat diameter of 1 mm is machined successfully. Thrust test results show that the implement and application of this machining process benefit the service performance improvement of the micro nozzle. (paper)

Production experience with the ATLAS Event Service

Science.gov (United States)

Benjamin, D.; Calafiura, P.; Childers, T.; De, K.; Guan, W.; Maeno, T.; Nilsson, P.; Tsulaia, V.; Van Gemmeren, P.; Wenaus, T.; ATLAS Collaboration

2017-10-01

The ATLAS Event Service (AES) has been designed and implemented for efficient running of ATLAS production workflows on a variety of computing platforms, ranging from conventional Grid sites to opportunistic, often short-lived resources, such as spot market commercial clouds, supercomputers and volunteer computing. The Event Service architecture allows real time delivery of fine grained workloads to running payload applications which process dispatched events or event ranges and immediately stream the outputs to highly scalable Object Stores. Thanks to its agile and flexible architecture the AES is currently being used by grid sites for assigning low priority workloads to otherwise idle computing resources; similarly harvesting HPC resources in an efficient back-fill mode; and massively scaling out to the 50-100k concurrent core level on the Amazon spot market to efficiently utilize those transient resources for peak production needs. Platform ports in development include ATLAS@Home (BOINC) and the Google Compute Engine, and a growing number of HPC platforms. After briefly reviewing the concept and the architecture of the Event Service, we will report the status and experience gained in AES commissioning and production operations on supercomputers, and our plans for extending ES application beyond Geant4 simulation to other workflows, such as reconstruction and data analysis.

Talking about Service-Learning: Product or Process? Reciprocity or Solidarity?

Science.gov (United States)

Clifford, Joan

2017-01-01

Through an exploration of values of the neoliberal university and critical service-learning, this article explores how associating service-learning with products and relationships based on reciprocity negatively impacts its connection to social justice. By emphasizing the constructs of process and solidarity, instead of products and reciprocity,…

Preparing the Production of a New Product in Small and Medium-Sized Enterprises by Using the Method of Projects Management

Science.gov (United States)

Bijańska, Jolanta; Wodarski, Krzysztof; Wójcik, Janusz

2016-06-01

Efficient and effective preparation the production of new products is important requirement for a functioning and development of small and medium-sized enterprises. One of the methods, which support the fulfilment of this condition is project management. This publication presents the results of considerations, which are aimed at developing a project management model of preparation the production of a new product, adopted to specificity of small and medium-sized enterprises.

Firm size and productivity. Evidence from the electricity distribution industry in Brazil

International Nuclear Information System (INIS)

Tovar, Beatriz; Javier Ramos-Real, Francisco; De Almeida, Edmar Fagundes

2011-01-01

In this paper we apply Stochastic Frontier Analysis through a distance function to investigate the impact of firm size on productivity development in electricity distribution. We use a sample of seventeen Brazilian firms from 1998 to 2005 and decompose productivity into technical efficiency, scale efficiency and technical change. Moreover, a further step is to decompose the technical change measurement into several components. The results indicate that firm size is important for industry's productivity, and therefore a key aspect to consider when making decisions that affect the market structure in the electricity distribution industry. (author)

Lessons from empirical studies in product and service variety management.

OpenAIRE

Lyons, Andrew C.L.

2013-01-01

[EN] For many years, a trend for businesses has been to increase market segmentation and extend product and service-variety offerings in order to provid more choice for customers and gain a competitive advantags. However, there have been relatively few variety-related, empirical studies that have been undertaken. In this research, two empirical studies are presented that address the impact of product and service variety on business and business function performance. In the first (service-vari...

Effect of limestone particle size on egg production and eggshell ...

African Journals Online (AJOL)

Different limestone particle sizes had no effect on any of the tested egg production and eggshell quality parameters. These results suggested that larger particles limestone are not necessarily essential to provide sufficient Ca2+ to laying hens for egg production and eggshell quality at end-of-lay, provided that the dietary Ca ...

Use of intradermal botulinum toxin to reduce sebum production and facial pore size.

Science.gov (United States)

Shah, Anil R

2008-09-01

Review the safety profile and subjective efficacy of intradermal botulinum toxin type A in facial pore size and sebum production. Retrospective analysis of 20 patients. Twenty consecutive patients with a single application of intradermal botulinum toxin type A were examined: Patients (17/20) noted an improvement in sebum production and a decrease in pores size at 1 month after injection. No complications were observed, and 17/20 patients were satisfied with the procedure. Preliminary data suggests that intradermal botulinum toxin may play a role in decreasing sebum production. Further quantitive study may be necessary to determine effects of intradermal botulinum toxin on pore size.

Body size and the timing of egg production in parasitoid wasps.

NARCIS (Netherlands)

Ellers, J.; Jervis, M.

2003-01-01

In insects several key fitness-related variables are positively correlated with intraspecific variation in body size, but little is known about size-related variation in the timing of egg production within species. Female insects are known to vary in the degree to which they concentrate egg

The Design of Smart Product-Service Systems (PSSs) : An Exploration of Design Characteristics

NARCIS (Netherlands)

Valencia Cardona, A.M.; Mugge, R.; Schoormans, J.P.L.; Schifferstein, H.N.J.

2015-01-01

Smart Product-Service Systems (Smart PSSs) integrate smart products and e-services into single solutions. Smart products make use of information and communication technology (ICT) to collect, process and produce information, while e-services are web portals, apps and means alike, which facilitate

Maintaining ecosystem services through continued livestock production on California rangelands

Science.gov (United States)

Barry, S.; Becchetti, T.

2015-12-01

Nearly 40% of California is rangeland comprising the largest land type in California and providing forage for livestock, primarily beef cattle. In addition to forage, rangelands provide a host of ecosystem systems services, including habitat for common and endangered species, fire fuels management, pollination services, clean water, viewsheds, and carbon sequestration. Published research has documented that most of these ecosystem services are positively impacted by managed livestock grazing and rancher stewardship. Ranchers typically do not receive any monetary reimbursement for their stewardship in providing these ecosystem services to the public. Markets have been difficult to establish with limited ability to adequately monitor and measure services provided. At the same time, rangelands have been experiencing rapid conversion to urbanization and more profitable and intensive forms of agriculture such as almond and walnut orchards. To prevent further conversion of rangelands and the loss of the services they provide, there needs to be a mechanism to identify and compensate landowners for the value of all products and services being received from rangelands. This paper considers two methods (opportunity cost and avoided cost) to determine the value of Payment for Ecosystem Services (PES) for rangelands. PES can raise the value of rangelands, making them more competitive financially. Real estate values and University of California Cooperative Extension Cost Studies, were used to demonstrate the difference in value (lost opportunity cost) between the primary products of rangelands (livestock production) and the products of the converted rangelands (almond and walnut orchards). Avoided costs for vegetation management and habitat creation and maintenance were used to establish the value of managed grazing. If conversion is to be slowed or stopped and managed grazing promoted to protect the ecosystem services rangelands provide, this value could be compensated through

78 FR 1277 - International Product Change-Global Expedited Package Services-Non-Published Rates

Science.gov (United States)

2013-01-08

... POSTAL SERVICE International Product Change--Global Expedited Package Services-- Non-Published...-- Non-Published Rates 4 (GEPS-NPR 4) to the Competitive Products List. DATES: Effective date: January 8... add Global Expedited Package Services-- Non-Published Rates 4 (GEPS-NPR 4) to the Competitive Products...

Airport level of service: A model according to departing passengers’ perceptions at a small-sized airport

Directory of Open Access Journals (Sweden)

Max Well Elias Gonçalves

2017-04-01

Full Text Available Purpose: This study proposes a conceptual model of level of service evaluation to a small-sized airport with a focus on departing passengers. Design/Methodology: The variables selected to compose the model were chosen according to their adequacy to departing passengers and the airport’s characteristics. A survey was conducted, and, posteriorly, exploratory factor analysis was used in order to verify the adequacy of the conceptual model proposed and also to improve it according to the results obtained. Findings: The results show that the level of service of the airport is composed of three dimensions: airport characteristics, passenger processing, and prices. The relative importance of the dimensions according to their contribution to the composition of the airport’s overall level of service was also determined. Originality/value: The paper combines theoretical and practical findings in a model for level of service evaluation to a small-sized airport from an air transportation management perspective.

Food production and service in UK hospitals.

Science.gov (United States)

Ahmed, Mohamed; Jones, Eleri; Redmond, Elizabeth; Hewedi, Mahmoud; Wingert, Andreas; Gad El Rab, Mohamed

2015-01-01

The purpose of this paper is to apply value stream mapping holistically to hospital food production/service systems focused on high-quality food. Multiple embedded case study of three (two private-sector and one public-sector) hospitals in the UK. The results indicated various issues affecting hospital food production including: the menu and nutritional considerations; food procurement; food production; foodservice; patient perceptions/expectations. Value stream mapping is a new approach for food production systems in UK hospitals whether private or public hospitals. The paper identifies opportunities for enhancing hospital food production systems. The paper provides a theoretical basis for process enhancement of hospital food production and the provision of high-quality hospital food.

The Impact of Product and Service Modularity on Business Performance

DEFF Research Database (Denmark)

Hsuan, Juliana; Frandsen, Thomas; Raja, Jawwad

Modularity has been proposed as a powerful way of managing complexity. The emerging literature points to the importance of modularity of service architecture, with case based studies in logistics and healthcare. Little is known about the relationship between product and service modularity...... and their effects on business performance, both empirically and theoretically. This paper explores the relationship between product and service modularity and their effects on business performance based on a survey of Danish manufacturers. We provide empirical and theoretical insights into the emerging fields...

Size-density metrics, leaf area, and productivity in eastern white pine

Science.gov (United States)

J. C. Innes; M. J. Ducey; J. H. Gove; W. B. Leak; J. P. Barrett

2005-01-01

Size-density metrics are used extensively for silvicultural planning; however, they operate on biological assumptions that remain relatively untested. Using data from 12 even-aged stands of eastern white pine (Pinus strobus L.) growing in southern New Hampshire, we compared size-density metrics with stand productivity and its biological components,...

Sizing inventory of blood products in a blood bank at Brazil based on a model of inventory management and a demand forecast

Directory of Open Access Journals (Sweden)

Julia Lorena Marques Gurgel

2014-02-01

Full Text Available The management of the stocks of products derived from the blood processing collected in blood banks is a problem for health services in Brazil and the world. Quantify the stocks of these products in order to equalize the demand and supply is not a simple task. It's necessary ensure that the product is available when needed and in due time. However, there is no how overestimate these stocks given that the product is perishable and it is not easy the availability of raw material (blood for processing. There are few studies in Brazil, however, that discuss this issue. This study will focus on one Brazilian Hemocentro, which has faced the challenge of measure the demand for haemotherapic's products and establish parameters to control their stocks. Thus, it was sought to adapt a recent study realized out of the country, about sizing of stocks of a inventory for blood banks, combined with a forecast model of demand for blood derivatives subclassified by blood type. This control aims to increase the availability of the transfusion service, as it intends to reduce shortages and wastage of the blood collected.

Latency and Criticality of Uncertainties in the Development of Product-Service Systems

DEFF Research Database (Denmark)

Ramirez Hernandez, Tabea; Kreye, Melanie; Pigosso, Daniela Cristina Antelmi

2018-01-01

Servitization requires manufacturers to develop new business models - compound offerings between products and services often referred to as Product-Service Systems (PSS). The development of PSS goes beyond the traditional product-development practices, requiring new processes and capabilities due...... to the high levels of uncertainty caused by the novelty and complexity of developing the product and the service in parallel. Uncertainty is further increased through mostly long life cycles of PSS and organisational complexity caused by a high degree of stakeholder involvement (Wolfenstetter et al., 2015...

Service Quality and Non-Muslim Satisfaction Using Sharia Bank Products and Services

Directory of Open Access Journals (Sweden)

Nova Ch Mamuaya

2018-01-01

Full Text Available Some studies show that religious belief does not take effect affecting consumer using sharia bank products and services. This research has implemented six dimensions of Othman and Owen which modified five dimensions of Parasuraman with adding compliance dimension. The six dimensions of Othman & Owen are known as CARTER (compliance, assurance, reliability, tangible, empathy, and responsiveness. The research purpose is to analyze compliance, assurance, reliability, tangible, empathy, and responsiveness effect on non-Muslim customer satisfaction on sharia bank products and services at Manado Sulawesi Utara partially or simultaneously. The data was gathered with questionnaire instruments of 70 respondents, measured with five Likert scale five dots. The research result shows compliance, assurance, reliability, tangible, empathy, and responsiveness has significant effect on customer satisfaction. Responsive has most strong effect and compliance is the weakest.

Service Innovation Methodologies II : How can new product development methodologies be applied to service innovation and new service development? : Report no 2 from the TIPVIS-project

OpenAIRE

Nysveen, Herbjørn; Pedersen, Per E.; Aas, Tor Helge

2007-01-01

This report presents various methodologies used in new product development and product innovation and discusses the relevance of these methodologies for service development and service innovation. The service innovation relevance for all of the methodologies presented is evaluated along several service specific dimensions, like intangibility, inseparability, heterogeneity, perishability, information intensity, and co-creation. The methodologies discussed are mainly collect...

Offshoring as an Exogenous Shock to the Services Production System

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael; Petersen, Bent

Production of services involves three key elements, an output for the client, resources of a provider and task execution. Offshoring of services acts as an exogenous shock to such a production system. Using multiple case methodology we investigate how task output, execution, and resources change...... as a consequence of offshoring and particularly how these elements are realigned. The cases reveal substantial managerial challenges in the alignment process prompted by a relocation of service task execution to an emerging economy. In particular, we find that instead of some set of capabilities that proactively...

Does size matter? An investigation of how department size and other organizational variables influence on publication productivity and citation impact

Energy Technology Data Exchange (ETDEWEB)

Aksnes, D.W.; Rørstad, K.; Piro, F.N.

2016-07-01

In this study, we investigate whether university department size is important in determining publication productivity and citation impact. Drawing on a unique dataset containing a variety of different variables at department levels, we are able to provide a richer picture of the research performance than what typically has been the case in many previous studies. In addition to analyzing the basic question of how size relates to scientific performance, we address whether the funding profile of the departments plays a role, whether the scientific performance is influenced by the composition of the academic personnel (in terms of gender, academic positions, recruiting personnel and the share of doctoral degree holders). The study shows that virtually no size effect can be identified and highly productive and highly cited units are found among both small, medium and large departments. For none of the organizational variables we are able to identify statistically significant relationships in respect to research performance at an overall level. We conclude that the productivity and citation differences at the level of departments cannot generally be explained by the selected variables for department size, funding structure and the composition of scientific personnel. (Author)

Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System

Directory of Open Access Journals (Sweden)

R. Ahmadi

2016-01-01

Full Text Available Micro fine sized palm oil fuel ash (POFA is a new supplementary cementitious material that can increase the strength, durability, and workability of concrete. However, production of this material incurs high cost and is not practical for the construction industry. This paper investigates a simple methodology of producing micro fine sized POFA by means of a laboratory scale wind tunnel system. The raw POFA obtained from an oil palm factory is first calcined to remove carbon residue and then grinded in Los Angeles abrasion machine. The grinded POFA is then blown in the fabricated wind tunnel system for separation into different ranges of particle sizes. The physical, morphological, and chemical properties of the micro fine sized POFA were then investigated using Laser Particle Size Analyser (PSA, nitrogen sorption, and Scanning Electron Microscopy with Energy Dispersive X-Ray (SEM-EDX. A total of 32.1% micro fine sized POFA were collected from each sample blown, with the size range of 1–10 micrometers. The devised laboratory scale of wind tunnel production system is successful in producing micro fine sized POFA and, with modifications, this system is envisaged applicable to be used to commercialize micro fine sized POFA production for the construction industry.

The Level of Customer Participation in Co-Production of Planning the Furniture Services Klientų įsitraukimo bendrai kuriant baldų projektavimo paslaugas laipsnis

Directory of Open Access Journals (Sweden)

Rigita Tijūnaitienė

2011-02-01

Full Text Available

size: 9pt;">This article analyses customer’s level of participation in co-production of service. A client’s, known as a co-producer’s involvement is a pretty new conception of participation in creation of service where customers participate in projects, in direct, all-round and not only physical ways, together with professional representatives of service providers. A customer’s activity is becoming an important factor in order to achieve the results of effective creation of service, considering that client’s level while participating plays an essential role in the creation of service. To accomplish an empirical investigation, two quality methods were selected (observation and interview, which were performed in the company, which provides the services of furniture design. Theoretical literature analyses showed that there are three levels of customer’s participation: low, average and high, which usually appear in creation of co-productive service. Empirical investigation reve-aled that while co-producing services of furniture design customer’s level of participation can be: low, average, average high and high. This shows that “pure” level of participation in co-production of furniture design service appears rarely, while intermediate (“impure” level of participation can be observed more frequently. It is established that customer’s personality, temper, stress, lack of designer’s attention, preliminary decisions, and goods peculiarities determine causes of customer’s involvement/ devolvement. It is established that it is hard to elucidate and reveal customer’s needs, wishes and motives when the level of participation in co-production of furniture design service is low, and, as a result of that, a chance that the results of a service could not correspond to all customers expectations, rises. It is

From product to service orientation in the maritime equipment industry

DEFF Research Database (Denmark)

Matzen, Detlef; McAloone, Timothy Charles

2008-01-01

of their products in operation. In this paper we present a case study of a shipping equipment manufacturer that is currently shifting business focus from manufacturing towards services delivery. Using a modelling scheme to differentiate and categorise different development tasks within the frame of business......In the shipping industry, operational performance of ships and their equipment is crucial to business. Suppliers of machinery and equipment are aware of this situation and see business development potential in setting up service systems that are dedicated to ensuring the performance...... development towards service oriented business, the case delivers insights into the broader context and product related parameters influencing the options and requirements for service system development....

Verification of product design using regulation knowledge base and Web services

Energy Technology Data Exchange (ETDEWEB)

Kim, Ik June [KAERI, Daejeon (Korea, Republic of); Lee, Jae Chul; Mun Du Hwan [Kyungpook National University, Daegu (Korea, Republic of); Kim, Byung Chul [Dong-A University, Busan (Korea, Republic of); Hwang, Jin Sang [PartDB Co., Ltd., Daejeom (Korea, Republic of); Lim, Chae Ho [Korea Institute of Industrial Technology, Incheon (Korea, Republic of)

2015-11-15

Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

Verification of product design using regulation knowledge base and Web services

International Nuclear Information System (INIS)

Kim, Ik June; Lee, Jae Chul; Mun Du Hwan; Kim, Byung Chul; Hwang, Jin Sang; Lim, Chae Ho

2015-01-01

Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

Changing Information Management in Product-Service System PLM: Customer-Oriented Strategy

OpenAIRE

Smirnov , Alexander; Shilov , Nikolay; Oroszi , Andreas; Sinko , Mario; Krebs , Thorsten

2017-01-01

Part 11: Product, Service, Systems (PSS); International audience; Increasing competition and appearance of new information and communication technologies makes companies to introduce new production and marketing models. The paper shares the experiences of improving PLM information management at an automation equipment manufacturer caused by implementation of product-service systems and their customer-driven configuration. Though the research results are based on the analysis of one company, t...

Topics in Productivity, Exporting and Outsourced Services

OpenAIRE

Kidder, Matthew Benjamin

2016-01-01

This dissertation is a collection of three empirical studies using the a survey of Chilean Manufactures. The first two chapters of this dissertation evaluates the productivity impact of exporting and service outsourcing. The last chapter evaluates selection mechanisms into exporting.The first chapter examines productivity and exporting. I find that asymmetric responses, between exporters and non-exporters, to changes in the domestic lending rate can cause propensity-score-matching-differen...

Defining product service systems

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Andreasen, Mogens Myrup

2002-01-01

, company and society benefit from the service systems related to each one of these dimensions, rather than simply one of the above. There are existing examples of the enhancement of business and market share by focusing on PSS, but this is often not a result of upfront strategy and ambitious goals. We...... attempt to identify the nature of such a multiple definition of PSS, the link to proper understanding of value and utility and innovative approaches for PSS-oriented product development. This paper will expand on the phenomenon of PSS in the belief that a proper understanding of PSS will give us...

Building an Ontology of Product/Service-Systems

DEFF Research Database (Denmark)

Pagoropoulos, Aris; Andersen, Jakob Axel Bejbro; Kjær, Louise Laumann

2014-01-01

In recent years, the innovation strategy and development process entitled Product/Service-Systems (PSS), has attracted considerable attention from the research and industrial communities. The many contributions have come from various academic and professional viewpoints, which despite providing...

Productivity in services in Latin America and the Caribbean

NARCIS (Netherlands)

Arias Ortiz, E.; Crespi, G.A.; Rasteletti, A.; Vargas, F.

2014-01-01

This paper studies productivity in Latin America and the Caribbean, with an emphasis on the service sector. It shows that the low levels of productivity observed in the region are not only a consequence of low productivity at the firm level, but also of misallocation of workers across firms. These

Grid production with the ATLAS Event Service

CERN Document Server

Benjamin, Douglas; The ATLAS collaboration

2018-01-01

ATLAS has developed and previously presented a new computing architecture, the Event Service, that allows real time delivery of fine grained workloads which process dispatched events (or event ranges) and immediately streams outputs. The principal aim was to profit from opportunistic resources such as commercial cloud, supercomputing, and volunteer computing, and otherwise unused cycles on clusters and grids. During the development and deployment phase, its utility also on the grid and conventional clusters for the exploitation of otherwise unused cycles became apparent. Here we describe our experience commissioning the Event Service on the grid in the ATLAS production system. We study the performance compared with standard simulation production. We describe the integration with the ATLAS data management system to ensure scalability and compatibility with object stores. Finally, we outline the remaining steps towards a fully commissioned system.

Productivity in Information Service Industries: a Panel Analysis of Japanese Firms

OpenAIRE

Futoshi Kurokawa; Kiyohiko G. Nishimura

2006-01-01

We examine factors determining productivity of information-technology service activities at firm level, using most comprehensive data of information service industries in Japan. We focus on the degree of modularisation and resulting outsourcing and economies/diseconomies of scale in software development, and changes. We find that outsourcing has persistent negative effects on total factor productivity, suggesting not only productivity-enhancing modularisation is not fully utilised but also pr...

Product quality, service reliability and management of operations at ...

African Journals Online (AJOL)

High product quality, service reliability, and management of operations are key factors in business growth and sustainability. Analyzing “The Starbucks Experience” is a pedagogical approach to reinforcing the concepts of control and management of quality, service reliability, and efficient operations in action. The objective ...

76 FR 2930 - International Product Change-Global Expedited Package Services-Non- Published Rates

Science.gov (United States)

2011-01-18

... POSTAL SERVICE International Product Change--Global Expedited Package Services-- Non- Published... request with the Postal Regulatory Commission to add Global Expedited Package Services-- Non-Published...--Non-Published Rates, to the Competitive Products List, and Notice of Filing (Under Seal) the Enabling...

77 FR 12311 - Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability

Science.gov (United States)

2012-02-29

...] Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability AGENCY: Food and... the availability of a guidance for industry entitled ``Size of Beads in Drug Products Labeled for... Evaluation and Research's (CDER's) current thinking on appropriate size ranges for beads in drug products...

The Influences of Designing for Services in Product Design Oriented Organisations

DEFF Research Database (Denmark)

Akoglu, Canan

2017-01-01

As the service sector has become a crucial part of the economy, addressing service design by investigating the role of designers, design process, and tools and methods has a powerful potential to contribute to the professional needs, the industry, and also academic research. The increase of service...... sector in industrialized economies, the shift from manufacturing industries to service industries and the penetration of information and communication technologies especially in daily life have taken attraction to service design and product design oriented organisations cannot stay away from...... this powerful change. From this perspective, this paper aims to show how designing for services has (potential) influence in product design oriented organisations. The empirical part of this research, 12 in-depth face-to-face interviews were conducted with design practitioners who have several years...

Effects of grain size and grain boundaries on defect production in nanocrystalline 3C-SiC

International Nuclear Information System (INIS)

Swaminathan, N.; Kamenski, Paul J.; Morgan, Dane; Szlufarska, Izabela

2010-01-01

Cascade simulations in single crystal and nanocrystalline SiC have been conducted in order to determine the role of grain boundaries and grain size on defect production during primary radiation damage. Cascades are performed with 4 and 10 keV silicon as the primary knock-on atom (PKA). Total defect production is found to increase with decreasing grain size, and this effect is shown to be due to increased production in grain boundaries and changing grain boundary volume fraction. In order to consider in-grain defect production, a new mapping methodology is developed to properly normalize in-grain defect production rates for nanocrystalline materials. It is shown that the presence of grain boundaries does not affect the total normalized in-grain defect production significantly (the changes are lower than ∼20%) for the PKA energies considered. Defect production in the single grain containing the PKA is also studied and found to increase for smaller grain sizes. In particular, for smaller grain sizes the defect production decreases with increasing distance from the grain boundary while for larger grain sizes the presence of the grain boundaries has negligible effect on defect production. The results suggest that experimentally observed changes in radiation resistance of nanocrystalline materials may be due to long-term damage evolution rather than changes in defect production rates from primary damage.

Reciprocal Allocation Method in Service Departments. The Case of a Production Enterprise

Science.gov (United States)

Papaj, Ewelina

2017-12-01

The main aim of this article is to indicate the role of reciprocal allocation method in the process of costs calculation. In the environment of nowadays companies, often taking very complex organisational forms, the existence of service departments becomes of great importance. Although, as far as management accounting processes are concerned, which lead to identifying the product cost, the service departments' costs come out to be of minor importance. This article means to prove that the service departments' costs and their reliable settlement are a desirable source of information about the products. This work consists of two parts. First of them features theoretical considerations and a critical analysis of subject literature. In the latter part, the service departments' costs calculation will be presented, basing on reciprocal services in a production enterprise from chemical industry.

Optimizing Greenhouse Rice Production: What Is the Best Pot Size?

OpenAIRE

Eddy, Robert; Acosta, Kevin; Liu, Yisi; Russell, Michael

2016-01-01

This publication describes our studies to determine the best pot size to optimize greenhouse rice production. We recommend 9-cm (4-inch) diameter square pot. Pots as small as 7-cm diameter yielded seed. This version is updated to include observations of larger pots with multiple plants. Photos of the plants growing under differing pot sizes are provided. This document is one entry in a series of questions and answers originally posted to the Purdue University Department of Horticulture & L...

Size-fractionated dissolved primary production and carbohydrate composition of the coccolithophore Emiliania huxleyi

Science.gov (United States)

Borchard, C.; Engel, A.

2015-02-01

Extracellular release (ER) by phytoplankton is the major source of fresh dissolved organic carbon (DOC) in marine ecosystems and accompanies primary production during all growth phases. Little is known, so far, on size and composition of released molecules, and to which extent ER occurs passively, by leakage, or actively, by exudation. Here, we report on ER by the widespread and bloom-forming coccolithophore Emiliania huxleyi grown under steady-state conditions in phosphorus-controlled chemostats (N:P = 29, growth rate of μ = 0.2 d-1) at present-day and high-CO2 concentrations. 14C incubations were performed to determine primary production (PP), comprised of particulate (PO14C) and dissolved organic carbon (DO14C). Concentration and composition of particulate combined carbohydrates (pCCHO) and high-molecular-weight (>1 kDa, HMW) dissolved combined carbohydrates (dCCHO) were determined by ion chromatography. Information on size distribution of ER products was obtained by investigating distinct size classes (10 kDa was significantly different, with a higher mol% of arabinose. The mol% of acidic sugars increased and that of glucose decreased with increasing size of HMW-dCCHO. We conclude that larger polysaccharides follow different production and release pathways than smaller molecules, potentially serving distinct ecological and biogeochemical functions.

What standards do I need for my product or service?

NARCIS (Netherlands)

H.J. de Vries (Henk); J. van der Zwan (Jappe)

2008-01-01

textabstractThere are standards for most products and services. Sometimes dozens of them. Examples of standards for products: - Standards for connection to another product. - Safety standards. - Standard dimensions. - Standards with test methods to be able to demonstrate the quality of the

Food Production, Management, and Services: Curriculum Guide.

Science.gov (United States)

Mumme, Debbie; Koukel, Sonja

This curriculum guide provides occupationally specific training designed to develop knowledge and skills for employment in the area of food production, management, and services. Contents include the Texas Essential Knowledge and Skills (TEAKS); sample course outlines; instructional strategies organized topically by chapters, each containing a…

Microfoundations for Sustainable Growth with Eco-Intelligent Product Service-Arrangements

Directory of Open Access Journals (Sweden)

Najine Ameli

2013-03-01

Full Text Available This paper argues that the contemporary growth paradigm needs to be reconsidered on a micro level of consumption and product service-systems. This becomes necessary since a dynamic link between macro strategies and micro implementation of sustainable growth is missing up to date. Therefore, mainstream sustainability strategies of efficiency and consistency are extended by sufficiency in order to integrate strategies for individual welfare within their social environment. Limits to and drivers for growth are revised and updated socially in terms of qualitative values, diminishing marginal utility or symbolic social distinction. We elaborate a definition of sustainable growth that fosters individual welfare by enhancing social enactment within the boundaries of environmental space. Shifting focus on social aspects in design fosters more sustainable production and consumption patterns while sustaining individual welfare. We derive latent indications for eco-intelligent product service-arrangements and evaluate to concepts by referring to introduced definitions and according indications. With doing so, we illustrate new pathways for the translation of sustainable growth and strategies into product service-systems.

Information logistics: A production-line approach to information services

Science.gov (United States)

Adams, Dennis; Lee, Chee-Seng

1991-01-01

Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems

Implementation of Contract Hybrid Concept in Multi Services Products (Aplication of the Warranty Bank Products/Kafalah in Syariah Banks

Directory of Open Access Journals (Sweden)

Muhammad Firmansyah

2016-08-01

Full Text Available Product of multi services in sharia banks presented in order to meet the needs of society as well as the development of the era transactions that course in accordance with Islamic principles, then the ownership  in  the syariah products  including  multi  product  in  Islamic banking  services  using  the concept of multi akad therein. This is done so that innovation in Islamic banking products had been developed so that it can be chosen by the public in conducting business transactions. Likewise, the multi-service bank guarantee products in Islamic banking, is a multi product contract, where there is more than one contract. Bank guarantees in Islamic banking is generally called kafalah product because this product is Kafalah main contract, followed by Ijarah contract, wadiah, and qardh. This paper  examines  the  concept  of  multi-contract/contract executed  hybrid  shariah  banking  at  bank product warranty/kafalah

Exponential Smoothing for Multi-Product Lot-Sizing With Heijunka and Varying Demand

OpenAIRE

Grimaud Frédéric; Dolgui Alexandre; Korytkowski Przemyslaw

2014-01-01

Here we discuss a multi-product lot-sizing problem for a job shop controlled with a heijunka box. Demand is considered as a random variable with constant variation which must be absorbed somehow by the manufacturing system, either by increased inventory or by flexibility in the production. When a heijunka concept (production leveling) is used, fluctuations in customer orders are not transferred directly to the manufacturing system allowing for a smoother production and better production capac...

Collaborative Services for Customized Production in Networked Companies

OpenAIRE

Fornasiero , Rosanna; Bastos , João; Azevedo , Américo; Zangiacomi , Andrea; Coscia , Eva

2013-01-01

Part 12: Services II; International audience; Increasingly, consumer demand of fashionable products is arising as significant challenge for company managers. In order to respond to this demand, companies are asked to supply small series of innovative and fashionable goods of high quality, affordable price and eco-compatibility in short periods of time and with high service levels. As a result of these rapidly evolving challenges, companies are forming collaborative networks in order to design...

Production experience with the ATLAS Event Service

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00066086; The ATLAS collaboration; Calafiura, Paolo; Childers, John Taylor; De, Kaushik; Guan, Wen; Maeno, Tadashi; Nilsson, Paul; Tsulaia, Vakhtang; van Gemmeren, Peter; Wenaus, Torre

2017-01-01

The ATLAS Event Service (AES) has been designed and implemented for efficient running of ATLAS production workflows on a variety of computing platforms, ranging from conventional Grid sites to opportunistic, often short-lived resources, such as spot market commercial clouds, supercomputers and volunteer computing. The Event Service architecture allows real time delivery of fine grained workloads to running payload applications which process dispatched events or event ranges and immediately stream the outputs to highly scalable Object Stores. Thanks to its agile and flexible architecture the AES is currently being used by grid sites for assigning low priority workloads to otherwise idle computing resources; similarly harvesting HPC resources in an efficient back-fill mode; and massively scaling out to the 50-100k concurrent core level on the Amazon spot market to efficiently utilize those transient resources for peak production needs. Platform ports in development include ATLAS@Home (BOINC) and the Google Comp...

Production Experience with the ATLAS Event Service

CERN Document Server

Benjamin, Douglas; The ATLAS collaboration

2016-01-01

The ATLAS Event Service (ES) has been designed and implemented for efficient running of ATLAS production workflows on a variety of computing platforms, ranging from conventional Grid sites to opportunistic, often short-lived resources, such as spot market commercial clouds, supercomputers and volunteer computing. The Event Service architecture allows real time delivery of fine grained workloads to running payload applications which process dispatched events or event ranges and immediately stream the outputs to highly scalable Object Stores. Thanks to its agile and flexible architecture the ES is currently being used by grid sites for assigning low priority workloads to otherwise idle computing resources; similarly harvesting HPC resources in an efficient back-fill mode; and massively scaling out to the 50-100k concurrent core level on the Amazon spot market to efficiently utilize those transient resources for peak production needs. Platform ports in development include ATLAS@Home (BOINC) and the Goggle Comput...

Business Management Practices for Small to Medium Sized Forest Products Firms

OpenAIRE

Espinoza, Omar Alejandro; Smith, Robert L. (Robert Lee), 1955 August 21-

2015-01-01

Provides the information required to start a small forest products company by discussing the U.S. forest products industry, business management, strategic planning, business plans, and management of human resources, marketing, operations, and finances. This project was supported by the Wood Education and Resource Center, Northeastern Area State and Private Forestry, Forest Service, U.S. Department of Agriculture, award number: 2010-DG-148.

Climate Products and Services to Meet the Challenges of Extreme Events

Science.gov (United States)

McCalla, M. R.

2008-12-01

The 2002 Office of the Federal Coordinator for Meteorological Services and Supporting Research (OFCM1)-sponsored report, Weather Information for Surface Transportation: National Needs Assessment Report, addressed meteorological needs for six core modes of surface transportation: roadway, railway, transit, marine transportation/operations, pipeline, and airport ground operations. The report's goal was to articulate the weather information needs and attendant surface transportation weather products and services for those entities that use, operate, and manage America's surface transportation infrastructure. The report documented weather thresholds and associated impacts which are critical for decision-making in surface transportation. More recently, the 2008 Climate Change Science Program's (CCSP) Synthesis and Assessment Product (SAP) 4.7 entitled, Impacts of Climate Change and Variability on Transportation Systems and Infrastructure: Gulf Coast Study, Phase I, included many of the impacts from the OFCM- sponsored report in Table 1.1 of this SAP.2 The Intergovernmental Panel on Climate Change (IPCC) reported that since 1950, there has been an increase in the number of heat waves, heavy precipitation events, and areas of drought. Moreover, the IPCC indicated that greater wind speeds could accompany more severe tropical cyclones.3 Taken together, the OFCM, CCSP, and IPCC reports indicate not only the significance of extreme events, but also the potential increasing significance of many of the weather thresholds and associated impacts which are critical for decision-making in surface transportation. Accordingly, there is a real and urgent need to understand what climate products and services are available now to address the weather thresholds within the surface transportation arena. It is equally urgent to understand what new climate products and services are needed to address these weather thresholds, and articulate what can be done to fill the gap between the

Towards a Service-Oriented Enterprise: The Design of a Cloud Business Integration Platform in a Medium-Sized Manufacturing Enterprise

Science.gov (United States)

Stamas, Paul J.

2013-01-01

This case study research followed the two-year transition of a medium-sized manufacturing firm towards a service-oriented enterprise. A service-oriented enterprise is an emerging architecture of the firm that leverages the paradigm of services computing to integrate the capabilities of the firm with the complementary competencies of business…

Employee motivation in Product-Service-System providers

DEFF Research Database (Denmark)

Kreye, Melanie

2016-01-01

This research investigates how intrinsic and extrinsic motivation factors contribute to employee motivation in providers of Product-Service Systems (PSS). Employee motivation determines the quality of the delivered service and is thus an area of great importance for PSS providers. We present rich...... case-based data collected through semi-structured interviews, a survey and secondary sources. The analysis showed the particularly high importance of intrinsic and individual motivation factors such as the fulfilling nature of the work and skill development showing the ownership and pride service...... employees took in their work. Further, the organisation needs to set the context of high employee motivation by enabling flexibility and performance feedback. Our research contributes to the literature by providing a first empirical study of employee motivation in PSS providers and thus providing important...

The Value of Product-enabled Services in Top R&D Spenders in Canada and Europe

DEFF Research Database (Denmark)

Tanev, Stoyan; Liotta, Giacomo; Kleismantas, Andrius

This paper is based on an empirical study addressing the value of product-enabled services in top R&D spenders from Canada and Europe. The focus is on product-driven firms for which new service development is particularly challenging. Existing literature on the value attributes of hybrid value...... offers is mostly conceptual and needs to be further developed through empirical studies. The research sample used in this work consists of 83 product-driven firms that were selected from the list of the top 100 R&D spenders in 2011. Several combinations of keywords linked to different aspects of service....... The results show that the main service value attributes for Canadian firms are: better service effectiveness, higher market share, higher service quality, and customer satisfaction. The service value attributes for the European firms of the sample include, among others, product added-value, product...

It takes two to tango? Understanding the co-production of public services by integrating the services management and public administration perspectives

OpenAIRE

S.P. Osborne; K. Strokosch

2013-01-01

We propose an important theoretical development for our understanding of the co-production of public services. It combines the insights from both public administration and services management theory to produce a novel typology of co-production. This clarifies its role at the operational and strategic levels, as well as its potential for transformational change in public services. Understanding co-production in this way provides a basis through which to explore a whole range of dimensions of c...

Does ownership affect the variability of the production process? Evidence from international courier services

NARCIS (Netherlands)

Hsieh, C.; Lazzarini, S.G.; Nickerson, J.A.; Laurini, M.

2010-01-01

A firm often must ensure that products or services it produces match customer expectations. We define variability as any deviation in a production process yielding products or services whose attributes differ from the firm's stated target specifications. Firms pursuing products marked by low

76 FR 3144 - Draft Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability

Science.gov (United States)

2011-01-19

...] Draft Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability AGENCY... announcing the availability of a draft guidance for industry entitled ``Size of Beads in Drug Products... Evaluation and Research's (CDER's) current thinking on appropriate size ranges for beads in drug products...

Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene

OpenAIRE

Geng, Xiumei; Guo, Yufen; Li, Dongfang; Li, Weiwei; Zhu, Chao; Wei, Xiangfei; Chen, Mingliang; Gao, Song; Qiu, Shengqiang; Gong, Youpin; Wu, Liqiong; Long, Mingsheng; Sun, Mengtao; Pan, Gebo; Liu, Liwei

2013-01-01

Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2?nm have been obtained b...

Transportation and Production Lot-size for Sugarcane under Uncertainty of Machine Capacity

Directory of Open Access Journals (Sweden)

Sudtachat Kanchala

2018-01-01

Full Text Available The integrated transportation and production lot size problems is important effect to total cost of operation system for sugar factories. In this research, we formulate a mathematic model that combines these two problems as two stage stochastic programming model. In the first stage, we determine the lot size of transportation problem and allocate a fixed number of vehicles to transport sugarcane to the mill factory. Moreover, we consider an uncertainty of machine (mill capacities. After machine (mill capacities realized, in the second stage we determine the production lot size and make decision to hold units of sugarcane in front of mills based on discrete random variables of machine (mill capacities. We investigate the model using a small size problem. The results show that the optimal solutions try to choose closest fields and lower holding cost per unit (at fields to transport sugarcane to mill factory. We show the results of comparison of our model and the worst case model (full capacity. The results show that our model provides better efficiency than the results of the worst case model.

Interoperable web applications for sharing data and products of the International DORIS Service

Science.gov (United States)

Soudarin, L.; Ferrage, P.

2017-12-01

The International DORIS Service (IDS) was created in 2003 under the umbrella of the International Association of Geodesy (IAG) to foster scientific research related to the French satellite tracking system DORIS and to deliver scientific products, mostly related to the International Earth rotation and Reference systems Service (IERS). Since its start, the organization has continuously evolved, leading to additional and improved operational products from an expanded set of DORIS Analysis Centers. In addition, IDS has developed services for sharing data and products with the users. Metadata and interoperable web applications are proposed to explore, visualize and download the key products such as the position time series of the geodetic points materialized at the ground tracking stations. The Global Geodetic Observing System (GGOS) encourages the IAG Services to develop such interoperable facilities on their website. The objective for GGOS is to set up an interoperable portal through which the data and products produced by the IAG Services can be served to the user community. We present the web applications proposed by IDS to visualize time series of geodetic observables or to get information about the tracking ground stations and the tracked satellites. We discuss the future plans for IDS to meet the recommendations of GGOS. The presentation also addresses the needs for the IAG Services to adopt common metadata thesaurus to describe data and products, and interoperability standards to share them.

Aggregate Production Planning, Casestudy in a Medium-sized Industry of the Rubber Production Line in Ecuador.

Science.gov (United States)

Rosero-Mantilla, César; Sánchez-Sailema, Mayra; Sánchez-Rosero, Carlos; Galleguillos-Pozo, Rosa

2017-06-01

This research aims to improve the productivity in the rubber line of a medium-sized industry by increasing the production capacities through the use of the Aggregate Production Planning model. For this purpose an analysis of the production processes of the line was made and the aggregate plan was defined evaluating two strategies: Exact Production Plan (Zero Inventory) and Constant Workforce Plan (Vary Inventory) by studying the costs of both inventory maintenance and workforce. It was also determined how the installed capacity was used with the standards of the rubber line and measures for decreasing production costs were proposed. It was proven that only 70% of the plant capacity was being used so it could be possible to produce more units and to obtain a bigger market for the products of this line.+

Flexible lot sizing in hybrid make-to-order/make-to-stock production planning

NARCIS (Netherlands)

Beemsterboer, Bart; Land, Martin; Teunter, Ruud

2017-01-01

Hybrid make-to-order/make-to-stock production systems are difficult to control. Batch production of make-to-stock products allows for efficient capacity usage, but fixed batch sizes can make the system less responsive to make-to-order customers. Using Markov Decision Process modeling, we show that

78 FR 69691 - Draft Guidance for Industry on Product Name Placement, Size, and Prominence in Advertising and...

Science.gov (United States)

2013-11-20

...] Draft Guidance for Industry on Product Name Placement, Size, and Prominence in Advertising and... entitled ``Product Name Placement, Size, and Prominence in Advertising and Promotional Labeling.'' When... promotional labeling and advertising for prescription human drugs, including biological drug products, and...

An efficient computational method for a stochastic dynamic lot-sizing problem under service-level constraints

NARCIS (Netherlands)

Tarim, S.A.; Ozen, U.; Dogru, M.K.; Rossi, R.

2011-01-01

We provide an efficient computational approach to solve the mixed integer programming (MIP) model developed by Tarim and Kingsman [8] for solving a stochastic lot-sizing problem with service level constraints under the static–dynamic uncertainty strategy. The effectiveness of the proposed method

Integrated Facades as a Product-Service System : Business process innovation to accelerate integral product implementation

NARCIS (Netherlands)

Azcarate Aguerre, J.F.; den Heijer, A.C.; Klein, T.

2017-01-01

The Circular Economy (CE) attempts to realign business incentives, across all fields of human industry, to support the preservation of raw materials within closed economic loops. Within this conceptual frame, Product-Service Systems (PSS) combine the use of tangible products such as building

The field measurements of the activity-weighted size distributions of radon decay products

International Nuclear Information System (INIS)

Wasiolek, P.; Montassier, N.; Hopke, P.K.

1991-01-01

Because of the importance of particle size in the calculations of dose deposited in the respiratory tract by radon progeny, the determination of the size distribution of radon decay products in indoor air had increased in interest in recent years. A system for the measurement of the activity-weighted size distribution of radon decay products at environmental levels has been developed. The system (ASC-GSA) utilizes a combination of six multiple wire screens (Graded Screen Array) sampler detector units operated in parallel. The cut off points of the samplers and the data deconvolution procedure allow to obtain the activity fractions of radon progeny in the size range 0.5-500 mn. The computer control of sampling, alpha counting and data storage permits the operation of the system on the semi-continuous basis. The primary application of the ASC-GSA system has been to collect data of activity-weighted size distributions of radon progeny in real house environments. The results of field measurements in several houses with elevated radon levels are presented

Finite size and dynamical effects in pair production by an external field

International Nuclear Information System (INIS)

Martin, C.; Vautherin, D.

1988-12-01

We evaluate the rate of pair production in a uniform electric field confined into a bounded region in space. Using the Balian-Bloch expansion of Green's functions we obtain explicit expressions for finite size corrections to Schwinger's formula. The case of a time-dependent boundary, relevant to describe energy deposition by quark-antiquark pair production in ultrarelativistic collisions, is also investigated. We find that finite size effects are important in nuclear collisions. They decrease when the strength of the chromo-electric field between the nuclei is large. As a result, the rate of energy deposition increases sharply with the mass number A of the colliding nuclei

Innovation Cycles Concerning Strategic Planning of Product-Service-Systems

OpenAIRE

Hepperle, Clemens;Mörtl, Markus;Lindemann, Udo

2017-01-01

This paper proposes a research program for identifying, understanding and describing innovation cycles concerning strategic planning of product-service-systems. A general overview about the background of cycle management in innovation processes, which the proposed research program is part of, is given before focusing cycles concerning strategic planning. As companies offer more and more complex products in order to satisfy market needs, the innovation process of such products becomes also mor...

Global Precipitation Measurement (GPM) Mission Products and Services at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC)

Science.gov (United States)

Liu, Z.; Ostrenga, D.; Vollmer, B.; Kempler, S.; Deshong, B.; Greene, M.

2015-01-01

The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data within the NASA Earth Observation System Data Information System (EOSDIS). The GES DISC is also home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). Over the past 17 years, the GES DISC has served the scientific as well as other communities with TRMM data and user-friendly services. During the GPM era, the GES DISC will continue to provide user-friendly data services and customer support to users around the world. GPM products currently and to-be available: -Level-1 GPM Microwave Imager (GMI) and partner radiometer products, DPR products -Level-2 Goddard Profiling Algorithm (GPROF) GMI and partner products, DPR products -Level-3 daily and monthly products, DPR products -Integrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final) A dedicated Web portal (including user guides, etc.) has been developed for GPM data (http://disc.sci.gsfc.nasa.gov/gpm). Data services that are currently and to-be available include Google-like Mirador (http://mirador.gsfc.nasa.gov/) for data search and access; data access through various Web services (e.g., OPeNDAP, GDS, WMS, WCS); conversion into various formats (e.g., netCDF, HDF, KML (for Google Earth), ASCII); exploration, visualization, and statistical online analysis through Giovanni (http://giovanni.gsfc.nasa.gov); generation of value-added products; parameter and spatial subsetting; time aggregation; regridding; data version control and provenance; documentation; science support for proper data usage, FAQ, help desk; monitoring services (e.g. Current Conditions) for applications. The United User Interface (UUI) is the next step in the evolution of the GES DISC web site. It attempts to provide seamless access to data, information and services through a single interface without sending the user to different applications or URLs (e.g., search, access

Forest ecosystem services: Provisioning of non-timber forest products

Science.gov (United States)

James L. Chamberlain; Gregory E. Frey; C. Denise Ingram; Michael G. Jacobson; Cara Meghan Starbuck Downes

2017-01-01

The purpose of this chapter is to describe approaches to calculate a conservative and defensible estimate of the marginal value of forests for non-timber forest products (NTFPs). 'Provisioning" is one of four categories of benefits, or services that ecosystems provide to humans and was described by the Millennium Ecosystem Assessment as 'products...

48 CFR 252.225-7026 - Acquisition Restricted to Products or Services from Iraq or Afghanistan.

Science.gov (United States)

2010-10-01

... Products or Services from Iraq or Afghanistan. 252.225-7026 Section 252.225-7026 Federal Acquisition... to Products or Services from Iraq or Afghanistan. As prescribed in 225.7703-5(c), use the following clause: Acquisition Restricted to Products or Services From Iraq or Afghanistan (APR 2010) (a...

An Agile Methodology for Implementing Service-Oriented Architecture in Small and Medium Sized Organizations

Science.gov (United States)

Laidlaw, Gregory

2013-01-01

The purpose of this study is to evaluate the use of Lean/Agile principles, using action research to develop and deploy new technology for Small and Medium sized enterprises. The research case was conducted at the Lapeer County Sheriff's Department and involves the initial deployment of a Service Oriented Architecture to alleviate the data…

Exponential Smoothing for Multi-Product Lot-Sizing With Heijunka and Varying Demand

Directory of Open Access Journals (Sweden)

Grimaud Frédéric

2014-06-01

Full Text Available Here we discuss a multi-product lot-sizing problem for a job shop controlled with a heijunka box. Demand is considered as a random variable with constant variation which must be absorbed somehow by the manufacturing system, either by increased inventory or by flexibility in the production. When a heijunka concept (production leveling is used, fluctuations in customer orders are not transferred directly to the manufacturing system allowing for a smoother production and better production capacity utilization. The problem rather is to determine a tradeoff between the variability in the production line capacity requirement and the inventory level.

Valuing tradeoffs between agricultural production and ecosystem services in the Heihe River Basin

Science.gov (United States)

Li, Z.; Deng, X.; Wu, F.

2017-12-01

Ecosystem services are faced with multiple stress from complex driving factors, such as climate change and human interventions. The Heihe River Basin (HRB), as the second largest inland river basin in China, is a typical semi-arid and arid region with fragile and sensitive ecological environment. For the past decades, agricultural production activities in the basin has affected ecosystem services in different degrees, leading to complex relations among "water-land-climate-ecology-human", in which hydrological process and water resource management is the key. In this context, managing trade-offs among water uses in the river basin to sustain multiple ecosystem services is crucial for healthy ecosystem and sustainable socioeconomic development. In this study, we analyze the trade-offs between different water uses in agricultural production and key ecosystem services in the HRB by applying production frontier analysis, with the aim to explore the potential for managing them. This method traces out joint production frontiers showing the combinations of ecosystem services and agricultural production that can be generated in a given area, and it deals with the economic problem of the allocation of scarce water resources under presumed objective, which aims to highlight synergies and reduce trade-offs between alternative water uses. Thus, management schemes that targets to both sustain agricultural production and increase the provision of key ecosystem services have to consider not only the technological or biological nature of interrelationships, but also the economic interdependencies among them.

Do socio-economic factors, elderly population size and service development factors influence the development of specialist mental health programs for older people?

Science.gov (United States)

Shah, Ajit

2008-12-01

Despite the increase in the proportion of older people in the population, little is known about factors that facilitate the development of specialist mental health services for older people. The relationship between the presence of specialist mental health programs for older people and elderly population size, proportion of older people in the population, gross national domestic product (GDP), and various parameters of health funding, mental health funding and mental health service provision was examined in an ecological study using data from the World Health Organization. The presence of specialist mental health programs for older people was significantly associated with higher GDP, higher expenditure on healthcare and mental healthcare, the presence of a national mental health policy and a national mental health program, the availability of mental health care in primary care and the community, and higher density of psychiatric beds, psychiatrists, psychiatric nurses, psychologists and social workers. The challenge will be to persuade policy-makers in low and medium income countries, where the increase in the elderly population is most rapid, to develop specialist mental health services for older people.

76 FR 10628 - International Product Change-International Business Reply Service Contract

Science.gov (United States)

2011-02-25

...Postal Service gives notice of filing a request with the Postal Regulatory Commission to add International Business Reply Service Competitive Contract 3 to the Competitive Products List pursuant to 39 U.S.C. 3642.

Supply Chain Contracting for After-sales Service and Product Support

NARCIS (Netherlands)

D. Li (Dong)

2015-01-01

markdownabstractAbstract Over the past decades, business model innovation in product and its service has been growing rapidly, especially for durable goods. Companies shift their strategies from selling physical products to delivering solutions and performance for customers. Within this context,

Configuring Product Modularity and Service Modularity for Mass Customization Strategies

DEFF Research Database (Denmark)

Bask, Anu; Hsuan, Juliana; Rajahonka, Mervi

, and how such configurations become the foundations for mass customization strategies. As a result we identify critical characteristics that are relevant for both product and services, and suggest a conceptual framework consisting of twelve dynamic mass customization strategies with paired product...

Coping with the knowledge sharing barriers in Product Service Systems design

OpenAIRE

Bertoni, Marco; Larsson, Andreas

2010-01-01

This paper analyzes the knowledge sharing process that characterizes Product Service Systems (PSS) design, drawing on data from an in-depth study in the Swedish manufacturing industry. It categorizes and describes the most relevant knowledge sharing barriers affecting early PSS development phases, discussing them in terms of capabilities to be included in a knowledge engineering system to fulfil the increasing need for knowledge in product-service design. To cope with these barriers, the auth...

Collaborative networks in support of service-enhanced products

NARCIS (Netherlands)

Camarinha-Matos, L.M.; Afsarmanesh, H.; Koelmel, B.

2011-01-01

The development and support of highly customized and service-enhanced products requires new organizational structures, involving the manufacturers, customers and local suppliers in a process of co-creation. This requires the implementation of the glocal enterprise notion with value creation from

77 FR 72691 - Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services

Science.gov (United States)

2012-12-06

... importantly, the Small Business Act requires SBA to establish one definition of what is a small business... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG27 Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services AGENCY: U.S. Small Business Administration...

Factors affecting capsule size and production by lactic acid bacteria used as dairy starter cultures.

Science.gov (United States)

Hassan, A N; Frank, J F; Shalabi, S I

2001-02-28

The effects of sugar substrates on capsule size and production by some capsule-forming nonropy and ropy dairy starter cultures were studied. Test sugars (glucose, lactose, galactose, or sucrose) were used as a sole carbohydrate source and the presence of a capsule and its size were determined by using confocal scanning laser microscopy. Nonropy strains produced maximum capsule size when grown in milk. Strains that did not produce capsules in milk did not produce them in any other growth medium. Specific sugars required for capsule production were strain-dependent. Increasing lactose content of Elliker broth from 0.5 to 5% or adding whey protein or casein digest produced larger capsules. Whey protein concentrate stimulated production of larger capsules than did casamino acids or casitone. Some Streptococcus thermophilus strains produced capsules when grown on galactose only. Nonropy strains of Lactobacillus delbrueckii subsp. bulgaricus produced capsules on lactose, but not on glucose. A ropy strain of Lactobacillus delbrueckii subsp. bulgaricus produced a constant capsule size regardless of the growth medium. The ability of some strains of Streptococcus thermophilus to use galactose in capsule production could reduce browning of mozzarella cheese during baking by removing a source of reducing sugar. Media that do not support capsule production may improve cell harvesting.

Some Danish experience with product-service systems and their potentials and barriers to sustainable development

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

2003-01-01

This paper is one of the first attempts to scan the Danish experience with product-service systems and analyse the experiences with respect to potentials and barriers to sustainable development, i.e. reduced resource consumption and reduced environmental impact. The scan shows a variety of product-service-systems......: some have been around for many years and have not be set up for sustainability purposes, while others are rather new and are attempts to contribute to a more sustainable development. Some of the systems identified are so to say born as product-service-systems (like food catering), while others have...... been developed from being a product system into being a product-service-systems in order to support the marketing of more environmental friendly products....

Digital Tools to Support Knowledge Sharing and Cooperation in High-Investment Product-Services

NARCIS (Netherlands)

Aromaa, S.; Leino, S.P.; Reyes-Lecuona, A.; Frangakis, N.; Berglund, J.; Bosch, T.; Rhijn, G. van; Granholm, G.

2018-01-01

The manufacturing industry needs to adapt their product-services to meet customer requirements in today’s rapidly changing markets. This paper presents how technologies can support knowledge sharing and collaboration during product-service processes. This work was part of the European Union

48 CFR 252.225-7024 - Requirement for products or services from Iraq or Afghanistan.

Science.gov (United States)

2010-10-01

... or services from Iraq or Afghanistan. 252.225-7024 Section 252.225-7024 Federal Acquisition... products or services from Iraq or Afghanistan. As prescribed in 225.7703-5(b), use the following clause: Requirement for Products or Services From Iraq or Afghanistan (SEP 2008) (a) Definitions. As used in this...

Regional scale prioritisation for key ecosystem services, renewable energy production and urban development.

Science.gov (United States)

Casalegno, Stefano; Bennie, Jonathan J; Inger, Richard; Gaston, Kevin J

2014-01-01

Although the importance of addressing ecosystem service benefits in regional land use planning and decision-making is evident, substantial practical challenges remain. In particular, methods to identify priority areas for the provision of key ecosystem services and other environmental services (benefits from the environment not directly linked to the function of ecosystems) need to be developed. Priority areas are locations which provide disproportionally high benefits from one or more service. Here we map a set of ecosystem and environmental services and delineate priority areas according to different scenarios. Each scenario is produced by a set of weightings allocated to different services and corresponds to different landscape management strategies which decision makers could undertake. Using the county of Cornwall, U.K., as a case study, we processed gridded maps of key ecosystem services and environmental services, including renewable energy production and urban development. We explored their spatial distribution patterns and their spatial covariance and spatial stationarity within the region. Finally we applied a complementarity-based priority ranking algorithm (zonation) using different weighting schemes. Our conclusions are that (i) there are two main patterns of service distribution in this region, clustered services (including agriculture, carbon stocks, urban development and plant production) and dispersed services (including cultural services, energy production and floods mitigation); (ii) more than half of the services are spatially correlated and there is high non-stationarity in the spatial covariance between services; and (iii) it is important to consider both ecosystem services and other environmental services in identifying priority areas. Different weighting schemes provoke drastic changes in the delineation of priority areas and therefore decision making processes need to carefully consider the relative values attributed to different services.

How Rural Market Imperfections Shape the Relation Between Farm Size and Productivity

DEFF Research Database (Denmark)

Heltberg, Rasmus

The subject of this article is the alleged inverse relationship between farm size and productivity in developing countries. The recent controversy is reviewed, and a framework is provided to explain the inverse relationship based on plausible assumptions about imperfections in the markets for labor......, credit and land. On this basis testable hypotheses are derived. Using fram.level panel data from Pakistan, the framework is assessed by regressing output on operational fram size, size of owned holding, family size, tenurial status and irrigation status of the land. Household fixed effects are used...... to account for remaining unobserved heterogenity. It is concluded that an inverse relationship is present in Pakistan, and that the market imperfections framework performs well with the data...

Measurement of concentration and size distribution of radon decay products in homes using air cleaners

International Nuclear Information System (INIS)

Montassier, N.; Hopke, P.K.; Shi, Y.; McCallum, B.

1992-01-01

By removing particles, air cleaners can also eliminate radon decay products. However, by removing the particles, the open-quotes unattachedclose quotes fraction of the radon progeny is increased leading to a higher dose per unit exposure. Thus, both the concentration and size distributions of the radon decay products are needed to evaluate air cleaners. Three types of room air cleaners, NO-RAD Radon Removal System, Electronic Air Cleaner and PUREFLOW Air Treatment System were tested in a single family home in Arnprior, Ontario (Canada). Semi-continuous measurements of radon gas concentration and radon decay product activity weighted size distribution were performed in the kitchen/dining room under real living conditions. The effects of air cleaners on both the concentration and size distribution of the radon decay products were measured, and their impact on the dose of radiation given to the lung tissue were examined

Challenges in the design of smart product-service systems (PSSs) : Experiences from practitioners

NARCIS (Netherlands)

Valencia Cardona, A.M.; Mugge, R.; Schoormans, J.P.L.; Schifferstein, H.N.J.

2014-01-01

Smart Product-­?Service Systems (Smart PSSs) are market offerings that integrate products and services into one single solution through the implementation of IC technology. Smart PSSs allow organizations to develop relationships with consumers in new ways and have a growing presence in the

Content analysis of publications on product-service systems

Directory of Open Access Journals (Sweden)

Fernanda Hänsch Beuren

2014-02-01

Full Text Available This work is an update of the literature on product-service systems (PSS through a review of the literature from 2006 to 2011. Aiming at changing consumption of products to a more sustainable society, the PSS has been considered a competitive opportunity, which offers the use of the product through the provision of services. In this context, this paper aims to complement the existing literature on PSS through a structured search of relevant journal databases. The identified studies have important information on the PSS and these are presented throughout the text, highlighting major journals, most cited authors and the main article used as reference by the academy. From the identified and interpreted publications, the paper highlights some key factors, which the literature has approached on the subject in recent years. Therefore, by analyzing the publications during the selected study period, a conclusive synthesis is presented at the end of each key-factor. Finally, some suggestions for future research on the subject are presented, highlighting the need for theoretical and empirical research to achieve better understanding about the benefits of a PSS as well as tools and methodologies that facilitate its implementation.

Research on a simulation-based ship production support system for middle-sized shipbuilding companies

Science.gov (United States)

Song, Young Joo; Woo, Jong Hun; Shin, Jong Gye

2009-12-01

Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

Research on a simulation-based ship production support system for middle-sized shipbuilding companies

Directory of Open Access Journals (Sweden)

Young Joo Song

2009-12-01

Full Text Available Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

Determinant of Adoption Pattern of New Product/Services in Hotel ...

African Journals Online (AJOL)

In light of the intense competition facing the providers of hotel services/product, some managers are constantly engaged in the creation of new products that would hopefully win consumers acceptance. However, against a backdrop of changing technology and sophisticated consumer wants, inventing a successful ...

Co-production, new public governance and third sector social services in Europe

Directory of Open Access Journals (Sweden)

Victor Pestoff

2011-01-01

political and economic challenges facing the welfare state in the 21st century. Co-production provides a model for the mix of public service agents and citizens who contribute to the provision of a public service. New Public Governance (NPG puts much greater emphasis on citizen participation and third sector provision of social services than either traditional public administration or New Public Management. Co-production is a core element of NPG that promotes the mix of public service agents and citizens who contribute to the provis ionof a public service. This paper explores the implications of two comparative studies of paren tparticipation in preschool services in Europe. They observe that citizen participation clearly varies between different providers of social services, as too does client and staff influence. This empirical overview concludes that some third sector providers can facilitate greater citizen participation, while a 'glass ceiling' for participation exists in municipal and for-profit preschool services. These findings can contribute to a better understanding of the emerging paradigm of New Public Governance.

Design For Utility, Sustainability And Societal Virtues: Developing Product Service Systems

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Andreasen, Mogens Myrup

2004-01-01

, a factor 20 improvement in our environmental performance. One attempt, however, has recently emerged, which combines the product as an artefact with the service that the product provides to the user. Through the combination of these two facets, the company retains ownership of the physical artefact......There are a number of theories that describe the necessary improvements in global environmental performance in order to maintain status quo in our ecosystem. These theories are far reaching in their ambitions, and it is not immediately apparent as to how we should be able to achieve, for example...... and adds a responsibility and influence upon everything that the product gives rise to in its life; its usability, environmental and social virtues. This enables a series of potential improvements to the product¿s performance throughout its lifecycle. The ideal of product service system (PSS) development...

The power of management in medical services. Can we manage better for higher quality and more productive medical services?

Directory of Open Access Journals (Sweden)

Magdalena BARBU

2010-06-01

Full Text Available Medical services are the most important services of all since we all depend on them. Their quality and productivity can assure a wealthy nation and therefore good economical results. The offer of medical services depends on medical personnel and more than this, on the management in the medical field since any resource not managed well or not managed at all is only a lost one, regardless its value. Management is therefore the key, the “how to” method of obtaining the desired result. The same approach can be applied into our study in order to reach more productive medical services which to prove high quality to all patients. We need to use and to squeeze the entire force of management tools in order to reach our goal: accessible medical services full of quality. The current worldwide crisis situation makes us think that after job and food, even medical services (also a basic thing after all can become a “luxury” although this should never happen. Therefore we must do whatever needed to improve the way medical organizations are driven so that the quality of their medical services will be better and better and the productivity will be at a higher level. Medical management should have as a goal making it possible for patients to be able to solve their health problems as soon as possible and as good as possible.

Regional scale prioritisation for key ecosystem services, renewable energy production and urban development.

Directory of Open Access Journals (Sweden)

Stefano Casalegno

Full Text Available Although the importance of addressing ecosystem service benefits in regional land use planning and decision-making is evident, substantial practical challenges remain. In particular, methods to identify priority areas for the provision of key ecosystem services and other environmental services (benefits from the environment not directly linked to the function of ecosystems need to be developed. Priority areas are locations which provide disproportionally high benefits from one or more service. Here we map a set of ecosystem and environmental services and delineate priority areas according to different scenarios. Each scenario is produced by a set of weightings allocated to different services and corresponds to different landscape management strategies which decision makers could undertake. Using the county of Cornwall, U.K., as a case study, we processed gridded maps of key ecosystem services and environmental services, including renewable energy production and urban development. We explored their spatial distribution patterns and their spatial covariance and spatial stationarity within the region. Finally we applied a complementarity-based priority ranking algorithm (zonation using different weighting schemes. Our conclusions are that (i there are two main patterns of service distribution in this region, clustered services (including agriculture, carbon stocks, urban development and plant production and dispersed services (including cultural services, energy production and floods mitigation; (ii more than half of the services are spatially correlated and there is high non-stationarity in the spatial covariance between services; and (iii it is important to consider both ecosystem services and other environmental services in identifying priority areas. Different weighting schemes provoke drastic changes in the delineation of priority areas and therefore decision making processes need to carefully consider the relative values attributed to

The roles of productivity and ecosystem size in determining food chain length in tropical terrestrial ecosystems.

Science.gov (United States)

Young, Hillary S; McCauley, Douglas J; Dunbar, Robert B; Hutson, Michael S; Ter-Kuile, Ana Miller; Dirzo, Rodolfo

2013-03-01

Many different drivers, including productivity, ecosystem size, and disturbance, have been considered to explain natural variation in the length of food chains. Much remains unknown about the role of these various drivers in determining food chain length, and particularly about the mechanisms by which they may operate in terrestrial ecosystems, which have quite different ecological constraints than aquatic environments, where most food chain length studies have been thus far conducted. In this study, we tested the relative importance of ecosystem size and productivity in influencing food chain length in a terrestrial setting. We determined that (1) there is no effect of ecosystem size or productive space on food chain length; (2) rather, food chain length increases strongly and linearly with productivity; and (3) the observed changes in food chain length are likely achieved through a combination of changes in predator size, predator behavior, and consumer diversity along gradients in productivity. These results lend new insight into the mechanisms by which productivity can drive changes in food chain length, point to potential for systematic differences in the drivers of food web structure between terrestrial and aquatic systems, and challenge us to consider how ecological context may control the drivers that shape food chain length.

Enabling engineering support for integrated product and service innovation

OpenAIRE

Thor, Peter

2011-01-01

The increasing need for mobility in society alongside an intensifying concern for sustainability challenges today’s aviation industry. For companies, a Product-Service Systems (PSS) perspective puts emphasis on proving value to customers by offering a combination of hardware and services over an extended life cycle. While opening up the room for innovation, development from an extended life cycle perspective can seem daunting for companies currently focusing on development and sale of physica...

Mapping a product-service-system delivering defence avionics availability

OpenAIRE

Settanni, E.; Thenent, N.; Newnes, L.; Parry, G.; Goh, Y. M.

2017-01-01

Long-term support agreements such as availability-based contracts are often associated with the servitization of business models in such sectors as defence aerospace. In practice, there is no unambiguous way of linking availability and service outcomes from an operational perspective; rather, the focus tends to be placed almost exclusively on product-related metrics. To address this gap, this paper outlines a conceptual model of how advanced service outcomes should be delivered under an avail...

Sperm production, testicular size, serum gonadotropins and testosterone levels in Merino and Corriedale breeds.

Science.gov (United States)

Fernandez-Abella, D; Becu-Villalobos, D; Lacau-Mengido, I M; Villegas, N; Bentancur, O

1999-01-01

The relationships between testis size, hormone secretion and sperm production were studied during the spring (December) and autumn (May) in rams of two breeds with different breeding seasons and body weights (Corriedale and Australian Merino) maintained on native pastures and under natural photoperiods in Uruguay. Blood samples were collected at 20-min intervals during a 260-360-min period in 13 rams (four Corriedale, nine Australian Merino) during the late spring and autumn. Rams were weighed and testis size was estimated by orchimetry at each time period. Sperm production was estimated during a 2-week period, 2 months before blood collection and during each week following every blood collection. There was no relationship between testicular size and sperm production measured at the same time, nor between live weight and sperm production. In contrast, testicular volume during the late spring was correlated with sperm production in the autumn (r = 0.65; P = 0.02). The autumn serum LH was higher in Corriedale than in Merino rams. LH pulsatility was unaffected by season, but LH pulse frequency tended to be higher in Corriedale than in Merino rams, particularly in the late spring (2.37 versus 1.56 pulses/6 h; P = 0.08). Serum testosterone concentration was similar in both breeds and seasons. FSH levels were higher in the late spring than in the autumn in both breeds (Corriedale: 2.83 +/- 0.48 versus 2.17 +/- 0.24 ng x mL(-1); Merino: 2.23 +/- 0.24 versus 1.88 +/- 0.17 ng x mL(-1)). FSH and testosterone concentrations during the late spring were positively correlated with autumn sperm production (P = 0.07 and P = 0.03, respectively). In conclusion, the present experiment suggests that LH secretion is not a good parameter for the prediction of sperm production. In contrast, in our conditions (breeds and native pastures) testicular size and testosterone or FSH concentrations from the late spring may be used to predict sperm production in the autumn.

Size characterization of metal oxide nanoparticles in commercial sunscreen products

Science.gov (United States)

Bairi, Venu Gopal; Lim, Jin-Hee; Fong, Andrew; Linder, Sean W.

2017-07-01

There is an increase in the usage of engineered metal oxide (TiO2 and ZnO) nanoparticles in commercial sunscreens due to their pleasing esthetics and greater sun protection efficiency. A number of studies have been done concerning the safety of nanoparticles in sunscreen products. In order to do the safety assessment, it is pertinent to develop novel analytical techniques to analyze these nanoparticles in commercial sunscreens. This study is focused on developing analytical techniques that can efficiently determine particle size of metal oxides present in the commercial sunscreens. To isolate the mineral UV filters from the organic matrices, specific procedures such as solvent extraction were identified. In addition, several solvents (hexane, chloroform, dichloromethane, and tetrahydrofuran) have been investigated. The solvent extraction using tetrahydrofuran worked well for all the samples investigated. The isolated nanoparticles were characterized by using several different techniques such as transmission electron microscopy, scanning electron microscopy, dynamic light scattering, differential centrifugal sedimentation, and x-ray diffraction. Elemental analysis mapping studies were performed to obtain individual chemical and morphological identities of the nanoparticles. Results from the electron microscopy techniques were compared against the bulk particle sizing techniques. All of the sunscreen products tested in this study were found to contain nanosized (≤100 nm) metal oxide particles with varied shapes and aspect ratios, and four among the 11 products were showed to have anatase TiO2.

Product-line administration: a framework for redefining medical record department services.

Science.gov (United States)

Postal, S N

1990-06-01

Product-line administration is a viable approach for managing medical records services in an environment that demands high quantity and quality service levels. Product-line administration directs medical record department team members to look outside of the department and seek input from the customers it is intended to serve. The feedback received may be alarming at first, as the current state of products usually reveals a true lack of customer input. As the planning, defining, managing, and marketing phases are implemented, the road will not be easy and rewards will be slow to come. Product-line administration does not provide quick fixes, but it does provide long-term problem resolution as products are refined and new products developed to meet customer needs and expectations. In addition to better meeting the needs of the department's external customers, the department's internal customers' needs and expectations will be addressed. The participative management approach will help nurture each team member's creativity. The team members will have the opportunity to reach their full potential while reaping the rewards and benefits of providing products and services that meet the needs and expectations of all department customers. The future of the health care industry promises more changes as the country moves toward some form of prospective payment in the ambulatory setting. Reactive management and the constant struggle to catch up can no longer be accepted as a management approach. It is imperative that the medical record department be viewed as a business with product lines composed of quality products. The planning, defining, managing, and marketing components of product-line administration afford responsiveness to the current situation and the development of quality products that will ensure that medical record departments are prepared for the future.

Linkages Among Water Vapor Flows, Food Production, and Terrestrial Ecosystem Services

Directory of Open Access Journals (Sweden)

Johan Rockström

1999-12-01

Full Text Available Global freshwater assessments have not addressed the linkages among water vapor flows, agricultural food production, and terrestrial ecosystem services. We perform the first bottom-up estimate of continental water vapor flows, subdivided into the major terrestrial biomes, and arrive at a total continental water vapor flow of 70,000 km3/yr (ranging from 56,000 to 84,000 km3/yr. Of this flow, 90% is attributed to forests, including woodlands (40,000 km3/yr, wetlands (1400 km3/yr, grasslands (15,100 km3/yr, and croplands (6800 km3/yr. These terrestrial biomes sustain society with essential welfare-supporting ecosystem services, including food production. By analyzing the freshwater requirements of an increasing demand for food in the year 2025, we discover a critical trade-off between flows of water vapor for food production and for other welfare-supporting ecosystem services. To reduce the risk of unintentional welfare losses, this trade-off must become embedded in intentional ecohydrological landscape management.

Regulatory/Scientific Supports for Micro-, Small-, and Medium-Sized Enterprises (SMEs) With Medicinal Products Provided by the PMDA and EMA.

Science.gov (United States)

Kondo, Hideyuki; Shibatsuji, Masayoshi; Yasuda, Naoyuki

2018-01-01

Micro-, small-, and medium-sized enterprises (SMEs) have been considered as key players who can bring innovative medicinal products and/or technologies into the field. However, they may need much regulatory/scientific supports to provide their products, technologies, or services to the market in a timely way. Both the Pharmaceuticals and Medical Devices Agency (PMDA) and the European Medicines Agency (EMA), regulatory authorities for medicinal products in Japan and the EU, respectively, have prepared supportive measures for SMEs from the early phase of product/technology development to the postmarketing phase. With respect to supports for SMEs, both agencies have provided similar SME-specific supportive activities, including routine administrative assistance, consultations about product development strategy from an early phase, as well as specific regulatory/scientific issues and fee incentives. In addition, there is a system to register SME status in the EU, which can be a tool for regulators to know how much potential SME-driven activities have and with whom they should communicate to provide necessary supports. Furthermore, as new technologies and novel products from SMEs are not limited to the region where they are developed, close communication about these topics between the PMDA and the EMA will contribute to advancing patients' access to necessary medicinal products.

Product-oriented design theory for digital information services: A literature review.

NARCIS (Netherlands)

Wijnhoven, Alphonsus B.J.M.; Kraaijenbrink, Jeroen

2008-01-01

Purpose – The purpose of this paper is to give a structured literature review, design concepts, and research propositions related to a product-oriented design theory for information services. Information services facilitate the exchange of information goods with or without transforming these goods.

Staff perceptions of a Productive Community Services implementation: A qualitative interview study.

Science.gov (United States)

Bradley, Dominique Kim Frances; Griffin, Murray

2015-06-01

The Productive Series is a collection of change programmes designed by the English National Health Service (NHS) Institute for Innovation and Improvement to help frontline healthcare staff improve quality and reduce wasted time, so that this time can be reinvested into time spent with patients. The programmes have been implemented in at least 14 countries around the world. This study examines an implementation of the Productive Community Services programme that took place in a Community healthcare organisation in England from July 2010 to March 2012. To explore staff members' perceptions of a Productive Community Services implementation. Cross-sectional interview. Community Healthcare Organisation in East Anglia, England. 45 participants were recruited using purposive, snowballing and opportunistic sampling methods to represent five main types of staff group in the organisation; clinical team members, administrative team members, service managers/team leaders, senior managers and software support staff. Team members were recruited on the basis that they had submitted data for at least one Productive Community Services module. Semi-structured individual and group interviews were carried out after the programme concluded and analysed using thematic analysis. This report focuses on six of the themes identified. The analysis found that communication was not always effective, and there was a lack of awareness, knowledge and understanding of the programme. Many staff did not find the Productive Community Services work relevant, and although certain improvements were sustained, suboptimal practices crept back. Although negative outcomes were reported, such as the programme taking time away from patients initially, many benefits were described including improved stock control and work environments, and better use of the Electronic Patient Record system. One of the themes identified highlighted the positive perceptions of the programme, however a focus on five other themes

Using ecological production functions to link ecological processes to ecosystem services.

Science.gov (United States)

Ecological production functions (EPFs) link ecosystems, stressors, and management actions to ecosystem services (ES) production. Although EPFs are acknowledged as being essential to improve environmental management, their use in ecological risk assessment has received relatively ...

Requirement analysis to promote small-sized E-waste collection from consumers.

Science.gov (United States)

Mishima, Kuniko; Nishimura, Hidekazu

2016-02-01

The collection and recycling of small-sized waste electrical and electronic equipment is an emerging problem, since these products contain certain amounts of critical metals and rare earths. Even if the amount is not large, having a few supply routes for such recycled resources could be a good strategy to be competitive in a world of finite resources. The small-sized e-waste sometimes contains personal information, therefore, consumers are often reluctant to put them into recycling bins. In order to promote the recycling of E-waste, collection of used products from the consumer becomes important. Effective methods involving incentives for consumers might be necessary. Without such methods, it will be difficult to achieve the critical amounts necessary for an efficient recycling system. This article focused on used mobile phones among information appliances as the first case study, since it contains relatively large amounts of valuable metals compared with other small-sized waste electrical and electronic equipment and there are a large number of products existing in the market. The article carried out surveys to determine what kind of recycled material collection services are preferred by consumers. The results clarify that incentive or reward money alone is not a driving force for recycling behaviour. The article discusses the types of effective services required to promote recycling behaviour. The article concludes that securing information, transferring data and providing proper information about resources and environment can be an effective tool to encourage a recycling behaviour strategy to promote recycling, plus the potential discount service on purchasing new products associated with the return of recycled mobile phones. © The Author(s) 2015.

Co-production of community mental health services: Organising the interplay between public services and civil society in Denmark.

Science.gov (United States)

Vaeggemose, Ulla; Ankersen, Pia Vedel; Aagaard, Jørgen; Burau, Viola

2018-01-01

Co-production involves knowledge and skills based on both lived experiences of citizens and professionally training of staff. In Europe, co-production is viewed as an essential tool for meeting the demographic, political and economic challenges of welfare states. However, co-production is facing challenges because public services and civil society are rooted in two very different logics. These challenges are typically encountered by provider organisations and their staff who must convert policies and strategies into practice. Denmark is a welfare state with a strong public services sector and a relatively low involvement of volunteers. The aim of this study was to investigate how provider organisations and their staff navigate between the two logics. The present analysis is a critical case study of two municipalities selected from seven participating municipalities, for their maximum diversity. The study setting was the Community Families programme, which aim to support the social network of mental health users by offering regular contact with selected private families/individuals. The task of the municipalities was to initiate and support Community Families. The analysis built on qualitative data generated at the organisational level in the seven participating municipalities. Within the two "case study" municipalities, qualitative interviews were conducted with front-line co-ordinators (six) and line managers (two). The interviews were recorded, transcribed verbatim and coded using the software program NVivo. The results confirm the central role played by staff and identify a close interplay between public services and civil society logics as essential for the organisation of co-production. Corresponding objectives, activities and collaborative relations of provider organisations are keys for facilitating the co-productive practice of individual staff. Organised in this way, co-production can succeed even in a mental health setting associated with social stigma

Statistical distribution of time to crack initiation and initial crack size using service data

Science.gov (United States)

Heller, R. A.; Yang, J. N.

1977-01-01

Crack growth inspection data gathered during the service life of the C-130 Hercules airplane were used in conjunction with a crack propagation rule to estimate the distribution of crack initiation times and of initial crack sizes. A Bayesian statistical approach was used to calculate the fraction of undetected initiation times as a function of the inspection time and the reliability of the inspection procedure used.

Productive variability, border use and plot size in trials with cherry tomato

Directory of Open Access Journals (Sweden)

Daniel Santos

2018-02-01

Full Text Available ABSTRACT: Knowing the productive variability within protected environments is crucial for choosing the experimental design to be used in that conditions. Thus, the aim of the present study was to assess the variability of fruit production in protected environment cultivated with cherry tomatoes and to verify the border effect and plot size in reducing this variability. To this, data from an uniformity test carried out in a greenhouse with cherry tomato cv. ‘Lili’ were used. Total fresh mass of fruits per plant was considered being these plants arranged in cropping rows parallel to the lateral openings of the greenhouse and also the same plants arranged in columns perpendicular to these openings. To generate the borders, different scenarios were designed by excluding rows and columns and using different plot sizes. In each scenario, homogeneity of variances among the remaining rows and columns was tested. There is no variability of fruit production among rows or columns in trials with cherry tomatoes carried out in greenhouses and the use of border does not bring benefits in terms of reduction of coefficient of variation or reduction of cases of variance heterogeneity among rows or columns. Plots with a size equal to or greater than two plants make possible to use the completely randomized design in the cherry tomato trials in greenhouses.

Methodological Approaches to Designing Integrated Systems of Management of Food Service Enterprises

Directory of Open Access Journals (Sweden)

Yatsun Leonid M.

2016-02-01

Full Text Available The article presents materials of studying the processes of designing functions and structures of management of food service enterprises by criteria of composition of the enterprise objectives, their participation in the integration process of production, sales and organization of consumption of food products and services. There have been defined a qualimetric estimation of parameters for enterprises of different size by types of tasks — manufacture of products, marketing activities, customer service, personnel management, etc. Balance schemes of the production and economic system of enterprises regarding cost components and output of food products and services have been developed. The integrated approaches to designing management systems of food service enterprises on the basis of coordination of parameters of the target, linear, functional and resource subsystems have been proposed.

Employment differences in services: the role of wages, productivity and demand

NARCIS (Netherlands)

Glyn, A.; Salverda, W.; Möller, J.; Schmitt, J.; Sollogoub, M.

2005-01-01

recent decades reflected the failure of services-employment rates in Europe to converge to American levels whilst European employment rates in goods production were falling rapidly towards those of the USA. The services-employment gap is concentrated in distribution (retail and hotels and catering)

Creativity in ergonomic design: a supplemental value-adding source for product and service development.

Science.gov (United States)

Zeng, Liang; Proctor, Robert W; Salvendy, Gavriel

2010-08-01

This article investigates the role of creativity in ergonomic design and the generic process of developing creative products and services. Creativity is gaining increased emphasis in both academia and industry. More than 50 years of research in creativity indicates that creativity is key to product and service innovation. Nevertheless, there is scarcely any comprehensive review dedicated to appraising the complex construct of creativity, the underlying cognitive process, and the role of creativity in product and service development. We review relevant literature regarding creativity, creative cognition, and the engineering design process to appraise the role of creativity in ergonomic design and to construct a conceptual model of creative product and service development. A framework of ergodesign creativity is advanced that highlights the central role of creativity in synergistically addressing the four dimensions of ergonomic design: functionality, safety, usability, and affectivity. A conceptual model of creative design process is then constructed that is goal oriented and is initiated by active problem finding and problem formulating. This process is carried out in a recursive and dynamic way, facilitated by creative thinking strategies. It is proposed that ergodesign creativity can add supplemental value to products and services, which subsequently affects consumer behavior and helps organizations gain competitive advantage. The proposed conceptual framework of ergodesign creativity and creative design process can serve as the ground for future theory development. Propositions advanced in this study should facilitate designers generating products and services that are creative and commercially competitive.

76 FR 14284 - Domestic Shipping Services Product Launch of Parcel Select Regional Ground

Science.gov (United States)

2011-03-16

... POSTAL SERVICE 39 CFR Part 111 Domestic Shipping Services Product Launch of Parcel Select Regional... Standards of the United States Postal Service, Domestic Mail Manual (DMM[supreg]), to introduce a new competitive shipping option, Parcel Select Regional Ground \\TM\\ service. DATES: Effective Date: April 17, 2011...

Nano-sized crystalline drug production by milling technology.

Science.gov (United States)

Moribe, Kunikazu; Ueda, Keisuke; Limwikrant, Waree; Higashi, Kenjirou; Yamamoto, Keiji

2013-01-01

Nano-formulation of poorly water-soluble drugs has been developed to enhance drug dissolution. In this review, we introduce nano-milling technology described in recently published papers. Factors affecting the size of drug crystals are compared based on the preparation methods and drug and excipient types. A top-down approach using the comminution process is a method conventionally used to prepare crystalline drug nanoparticles. Wet milling using media is well studied and several wet-milled drug formulations are now on the market. Several trials on drug nanosuspension preparation using different apparatuses, materials, and conditions have been reported. Wet milling using a high-pressure homogenizer is another alternative to preparing production-scale drug nanosuspensions. Dry milling is a simple method of preparing a solid-state drug nano-formulation. The effect of size on the dissolution of a drug from nanoparticles is an area of fundamental research, but it is sometimes incorrectly evaluated. Here, we discuss evaluation procedures and the associated problems. Lastly, the importance of quality control, process optimization, and physicochemical characterization are briefly discussed.

77 FR 48550 - Technicolor Creative Services, Post Production Feature Mastering Division Including On-Site...

Science.gov (United States)

2012-08-14

... Services, Post Production Feature Mastering Division Including On-Site Leased Workers From Ajilon... Services, Post Production Feature Mastering Division, Hollywood, California (subject firm). The worker... the workers meet the eligibility requirements of the Trade Act of 1974. Conclusion After careful...

Standardized Curriculum for Food Production, Management and Services.

Science.gov (United States)

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized vocational education course titles and core contents for two courses in Mississippi are provided: food production, management, and services I and II. The first course contains the following units: (1) Vocational Industrial Clubs of America (VICA); (2) sanitation; (3) safety; (4) front of the house operations; (5) beverages; (6) food…

A Rough VIKOR-Based QFD for Prioritizing Design Attributes of Product-Related Service

Directory of Open Access Journals (Sweden)

Xiuzhen Li

2016-01-01

Full Text Available Many manufacturers today are striving to offer high value-added product-related services (PRS due to increasing competition and environmental pressure. PRS can reduce the negative impact on the environment, because it extends the life of products and minimizes the cost. Product and service planning has been considered as the critical factor to the success of PRS. Quality function deployment (QFD has been recognized as an efficient planning tool which can convert customer needs (CNs into design attributes of PRS involving product attributes (PAs and service attributes (SAs. However, the subjective and vague information in the design of PRS with QFD may lead to inaccurate priority of PAs and SAs. To solve this problem, a novel rough VIKOR- (VIseKriterijumska Optimizaciji I Kompromisno Resenje- based QFD is proposed. The proposed approach integrates the strength of rough number (RN in manipulating vague concepts with less a priori information and the merit of VIKOR in structuring framework of compromise decision-making. Finally, an application in compressor-based service design is presented to illustrate the potential of the proposed method.

Global Precipitation Measurement (GPM) Mission Products and Services at the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC)

Science.gov (United States)

Liu, Zhong; Ostrenga, D.; Vollmer, B.; Deshong, B.; Greene, M.; Teng, W.; Kempler, S. J.

2015-01-01

On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data within the NASA Earth Observation System Data Information System (EOSDIS). The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). Over the past 16 years, the GES DISC has served the scientific as well as other communities with TRMM data and user-friendly services. During the GPM era, the GES DISC will continue to provide user-friendly data services and customer support to users around the world. GPM products currently and to-be available include the following: 1. Level-1 GPM Microwave Imager (GMI) and partner radiometer products. 2. Goddard Profiling Algorithm (GPROF) GMI and partner products. 3. Integrated Multi-satellitE Retrievals for GPM (IMERG) products. (early, late, and final)A dedicated Web portal (including user guides, etc.) has been developed for GPM data (http:disc.sci.gsfc.nasa.govgpm). Data services that are currently and to-be available include Google-like Mirador (http:mirador.gsfc.nasa.gov) for data search and access; data access through various Web services (e.g., OPeNDAP, GDS, WMS, WCS); conversion into various formats (e.g., netCDF, HDF, KML (for Google Earth), ASCII); exploration, visualization, and statistical online analysis through Giovanni (http:giovanni.gsfc.nasa.gov); generation of value-added products; parameter and spatial subsetting; time aggregation; regridding; data

Global Precipitation Measurement (GPM) Mission Products and Services at the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC)

Science.gov (United States)

Ostrenga, D.; Liu, Z.; Vollmer, B.; Teng, W. L.; Kempler, S. J.

2014-12-01

On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http://pmm.nasa.gov/GPM). The GPM mission consists of an international network of satellites in which a GPM "Core Observatory" satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data within the NASA Earth Observation System Data Information System (EOSDIS). The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). Over the past 16 years, the GES DISC has served the scientific as well as other communities with TRMM data and user-friendly services. During the GPM era, the GES DISC will continue to provide user-friendly data services and customer support to users around the world. GPM products currently and to-be available include the following: Level-1 GPM Microwave Imager (GMI) and partner radiometer products Goddard Profiling Algorithm (GPROF) GMI and partner products Integrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final) A dedicated Web portal (including user guides, etc.) has been developed for GPM data (http://disc.sci.gsfc.nasa.gov/gpm). Data services that are currently and to-be available include Google-like Mirador (http://mirador.gsfc.nasa.gov/) for data search and access; data access through various Web services (e.g., OPeNDAP, GDS, WMS, WCS); conversion into various formats (e.g., netCDF, HDF, KML (for Google Earth), ASCII); exploration, visualization, and statistical online analysis through Giovanni (http://giovanni.gsfc.nasa.gov); generation of value-added products; parameter and spatial subsetting; time aggregation; regridding

The provision of assistive technology products and services for people with dementia in the United Kingdom.

Science.gov (United States)

Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

2016-07-01

In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

Accelerating Innovation in Small and Medium-Sized Enterprises in the ICT Services Sector

Directory of Open Access Journals (Sweden)

Juan Vicente García Manjón

2016-09-01

Full Text Available This work is aimed at establishing key organizational strategies that push small and medium-sized enterprises (SMEs in the information and communication technologies (ICT services sector to be more innovative. Following an input and output approach, a theoretical model is built that helps determine such key factors. Then the model is validated with fieldwork carried out on a representative sample in Castile-Leon region (Spain. According to this model, the decision to innovate (and the trigger for research and development [R&D] activities in SMEs in the ICT services sector is the result of needs that are presented by customers (public or private sector in tailored projects. All the same, the factors leading to innovation are in order of importance, the technological level of the company, the effort made by the company in R&D, and finally, systems of incentives.

Terrestrial Hydrological Data from NASA's Hydrology Data and Information Services Center (HDISC): Products, Services, and Applications

Science.gov (United States)

Fang, Hongliang; Beaudoing, Hiroko K.; Mocko, David M.; Rodell, Matthew; Teng, Bill; Vollmer, Bruce

2010-01-01

Terrestrial hydrological variables are important in global hydrology, climate, and carbon cycle studies. The North American and Global Land Data Assimilation Systems (NLDAS and GLDAS, respectively) have been generating a series of land surface states (soil moisture, snow, and temperature) and fluxes (evapotranspiration, radiation, and heat flux) variables. These data, hosted at and available from NASA s Hydrology Data and Information Services Center (HDISC), include the NLDAS hourly 1/8 degree products and the GLDAS 3-hourly 0.25 and 1.0 degree products. HDISC provides easy access and visualization and analysis capabilities for these products, thus reducing the time and resources spent by scientists on data management and facilitating hydrological research. Users can perform spatial and parameter subsetting, data format transformation, and data analysis operations without needing to first download the data. HDISC is continually being developed as a data and services portal that supports weather and climate forecasts, and water and energy cycle research.

Ecosystem services: foundations, opportunities, and challenges for the forest products sector

Science.gov (United States)

Trista M. Patterson; Dana L. Coelho

2009-01-01

The ecosystem service concept has been proposed as a meaningful framework for natural resource management. In theory, it holds concomitant benefit and consequence for the forest product sector. However, numerous barriers impede practitioners from developing concrete and enduring responses to emerging ecosystem service markets, policies, and initiatives. Principal among...

[Calculating the optimum size of a hemodialysis unit based on infrastructure potential].

Science.gov (United States)

Avila-Palomares, Paula; López-Cervantes, Malaquías; Durán-Arenas, Luis

2010-01-01

To estimate the optimum size for hemodialysis units to maximize production given capital constraints. A national study in Mexico was conducted in 2009. Three possible methods for estimating a units optimum size were analyzed: hemodialysis services production under monopolistic market, under a perfect competitive market and production maximization given capital constraints. The third method was considered best based on the assumptions made in this paper; an optimal size unit should have 16 dialyzers (15 active and one back up dialyzer) and a purifier system able to supply all. It also requires one nephrologist, five nurses per shift, considering four shifts per day. Empirical evidence shows serious inefficiencies in the operation of units throughout the country. Most units fail to maximize production due to not fully utilizing equipment and personnel, particularly their water purifier potential which happens to be the most expensive asset for these units.

Governing Forests for Provisioning Services: The Example of Honey Production in Southwest Ethiopia

NARCIS (Netherlands)

Wiersum, F.; Endalamaw, T.B.

2013-01-01

Provisioning services are major environmental services provided by forests. Especially in tropical countries, the livelihoods of local people often partly depend on a range of timber and non-timber forest products. The governance arrangements concerning such locally valued environmental services are

Bayreuth Productivity Analysis-a method for ascertaining and improving the holistic service productivity of acute care hospitals.

Science.gov (United States)

Pfannstiel, Mario Alexander

2016-01-01

The healthcare sector is lacking a method with which hospitals can measure the extent to which they achieve their goals in terms of aggregate productivity from both patients' and employees' perspectives. The Bayreuth Productivity Analysis (BPA) provides a solution to this problem because it uses two standardized questionnaires-one for patients and one for employees-to ascertain productivity at hospitals. These questionnaires were developed in several steps according to the principles of classical test theory, and they consist of six dimensions (information, organization, climate, methods, infrastructure and equipment) of five items each. One item describes a factual situation relevant to productivity and services so that it makes a contribution to the overall productivity of a hospital. After individualized evaluation of these items, the dimensions are subjectively weighted in the two questionnaires. The productivity index thus ascertained can be considered "holistic" when all patients and employees in a hospital make a differentiated assessment and weigh off each of the dimensions. In conclusion, the BPA constitutes a simple yet practicable method to ascertain and improve the holistic service productivity of hospitals. Copyright © 2014 John Wiley & Sons, Ltd.

Entrepreneurship in the service sector as a product of alertness and judgment

DEFF Research Database (Denmark)

Elkjær, Jørgen Ravn

Private and public services dominate modern society, and research on innovation systems related to services is of increasing importance in economics and  management. This paper presents a model that can be used to explain innovation and innovation policy in production and services, where the key...... is to use the entrepreneur as a concept within an institutional framework....

Factors influencing the role of Non-Wood Forest Products and Services

NARCIS (Netherlands)

Janse, G.; Ottitsch, A.

2005-01-01

In the light of social and economic developments, forest functions other than timber production have gained international importance and recognition. Resulting from this development, Non-Wood Forest Products and Services (NWFPS) are becoming more important, both for the general public as for forest

An Exploration of Smart Product-Service System Design : Guidelines and Insights for Design Management

NARCIS (Netherlands)

Valencia Cardona, A.M.

2017-01-01

This thesis reports on the findings of a research project funded by the Dutch Ministry of Education, Culture and Science. The thesis investigates the design of Smart Product-Service Systems (Smart PSSs), defined as the integration of smart, connected products and e-services, presented to consumers

Group heterogeneity increases the risks of large group size: a longitudinal study of productivity in research groups.

Science.gov (United States)

Cummings, Jonathon N; Kiesler, Sara; Bosagh Zadeh, Reza; Balakrishnan, Aruna D

2013-06-01

Heterogeneous groups are valuable, but differences among members can weaken group identification. Weak group identification may be especially problematic in larger groups, which, in contrast with smaller groups, require more attention to motivating members and coordinating their tasks. We hypothesized that as groups increase in size, productivity would decrease with greater heterogeneity. We studied the longitudinal productivity of 549 research groups varying in disciplinary heterogeneity, institutional heterogeneity, and size. We examined their publication and citation productivity before their projects started and 5 to 9 years later. Larger groups were more productive than smaller groups, but their marginal productivity declined as their heterogeneity increased, either because their members belonged to more disciplines or to more institutions. These results provide evidence that group heterogeneity moderates the effects of group size, and they suggest that desirable diversity in groups may be better leveraged in smaller, more cohesive units.

Identifying Usability and Productivity Dimensions for Measuring the Success of Mobile Business Services

Directory of Open Access Journals (Sweden)

Maiju Vuolle

2008-01-01

Full Text Available This paper reviews existing measures used for evaluating the usability of information systems and those used for evaluating the level of the productivity of a company. We discuss the usefulness of the existing measures in the mobile business context, where both mobility and work-context pose specific demands for the mobile business services. The review showed that the existing measures rarely consider the great contextual variation caused by the mobility of the services and the demands this poses on usability; which, in turn, affects productivity. To build a measurement tool that better meets the requirements of mobile business services, we completed case studies on two mobile business services, one used in passenger transport and the other in construction sites. Based on the understanding gained from the case studies, we propose a list of dimensions and items addressing both usability and productivity aspects that work as the basis for a multidisciplinary measurement tool.

48 CFR 252.225-7023 - Preference for products or services from Iraq or Afghanistan.

Science.gov (United States)

2010-10-01

... services from Iraq or Afghanistan. 252.225-7023 Section 252.225-7023 Federal Acquisition Regulations System... from Iraq or Afghanistan. As prescribed in 225.7703-5(a), use the following provision: Requirement for Products or Services from Iraq or Afghanistan (APR 2010) (a) Definitions. Product from Iraq or Afghanistan...

A Comparison of New Service versus New Product Development

DEFF Research Database (Denmark)

Schleimer, Stephanie Christine; Schulman, Arthur

2011-01-01

Collaboration among firms for innovation has received considerable attention. However, little is known about how firm-to-firm collaboration is configured in new service development (NSD) versus new product development (NPD). This study takes a multidimensional approach and measures firm-to-firm c...

Unit-level voluntary turnover rates and customer service quality: implications of group cohesiveness, newcomer concentration, and size.

Science.gov (United States)

Hausknecht, John P; Trevor, Charlie O; Howard, Michael J

2009-07-01

Despite substantial growth in the service industry and emerging work on turnover consequences, little research examines how unit-level turnover rates affect essential customer-related outcomes. The authors propose an operational disruption framework to explain why voluntary turnover impairs customers' service quality perceptions. On the basis of a sample of 75 work units and data from 5,631 employee surveys, 59,602 customer surveys, and organizational records, results indicate that unit-level voluntary turnover rates are negatively related to service quality perceptions. The authors also examine potential boundary conditions related to the disruption framework. Of 3 moderators studied (group cohesiveness, group size, and newcomer concentration), results show that turnover's negative effects on service quality are more pronounced in larger units and in those with a greater concentration of newcomers.

Understanding the co-production of public services: the case of asylum seekers in Glasgow

OpenAIRE

Strokosch, Kirsty

2013-01-01

This thesis explores the co-production of public services in the case of asylum seekers in Glasgow. It makes contributions on the theoretical and empirical levels. First, it integrates two theoretical standpoints on co-production from the public administration/management and services management literatures. This integration forms the basis for the development of an original conceptual framework which differentiates three modes of co-production at the level of the individual ser...

The Coordinates of Co-Production in the Educational Services System

Directory of Open Access Journals (Sweden)

Jivan Alexandru

2017-06-01

Full Text Available The paper proposes a certain delimitation of the concepts of cooperation and co-production in services and aims to apply them concretely in education, related to the connections (cooperation between offeror and beneficiary. The article is part of a wider plan that seeks to implement the legitimacy of using the notion of co-production in all sectors of activity, whether it is the one of goods or services to designate cooperative relationships between producer and consumer or, as we like to say, between the offeror and the beneficiary. The article starts with the definition and clarification of the concept of co-production. After briefly setting several conceptual aspects, an applied analysis is performed on a group of respondents from education, using a questionnaire developed to provide adequate information for the purposes set forth: some relationships between the influence factors of the co-production between teacher and student are analysed. The questionnaire allows us to share interesting conclusions regarding the reasons that make people to participate. An analysis of the logic behind the co-production phenomenon is offered, reserves for the improvement of such relations being revealed for the education system. The conclusions following the data analysis confirm the initial assumptions and reveal interesting aspects, as described in the final section.

Species and size diversity in protective services offered by coral guard-crabs

Directory of Open Access Journals (Sweden)

C. Seabird McKeon

2014-09-01

Full Text Available Coral guard-crabs in the genus Trapezia are well-documented defenders of their pocilloporid coral hosts against coral predators such as the Crown-of-Thorns seastar (Acanthaster planci complex. The objectives of this study were to examine the protective services of six species of Trapezia against corallivory, and the extent of functional diversity among these Trapezia species.Studies conducted in Mo’orea, French Polynesia showed the Trapezia—coral mutualism protected the host corals from multiple predators through functional diversity in the assemblage of crab symbionts. Species differed in their defensive efficacy, but species within similar size classes shared similar abilities. Smaller-size Trapezia species, which were previously thought to be ineffective guards, play important defensive roles against small corallivores.We also measured the benefits of this mutualism to corals in the midst of an Acanthaster outbreak that reduced the live coral cover on the fore reef to less than 4%. The mutualism may positively affect the reef coral demography and potential for recovery during adverse predation events through shelter of multiple species of small corals near the host coral. Our results show that while functional diversity is supported within the genus, some Trapezia species may be functionally equivalent within the same size class, decreasing the threat of gaps in coral protection caused by absence or replacement of any single Trapezia species.

Supporting Hydrometeorological Research and Applications with Global Precipitation Measurement (GPM) Products and Services

Science.gov (United States)

Liu, Zhong; Ostrenga, D.; Vollmer, B.; Deshong, B.; MacRitchie, K.; Greene, M.; Kempler, S.

2016-01-01

Precipitation is an important dataset in hydrometeorological research and applications such as flood modeling, drought monitoring, etc. On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data. The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). GPM products currently available include the following:1. Level-1 GPM Microwave Imager (GMI) and partner radiometer products2. Goddard Profiling Algorithm (GPROF) GMI and partner products (Level-2 and Level-3)3. GPM dual-frequency precipitation radar and their combined products (Level-2 and Level-3)4. Integrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final run)GPM data can be accessed through a number of data services (e.g., Simple Subset Wizard, OPeNDAP, WMS, WCS, ftp, etc.). A newly released Unified User Interface or UUI is a single interface to provide users seamless access to data, information and services. For example, a search for precipitation products will not only return TRMM and GPM products, but also other global precipitation products such as MERRA (Modern Era Retrospective-Analysis for Research and Applications), GLDAS (Global Land Data Assimilation Systems), etc.New features and capabilities have been recently added in GIOVANNI to allow exploring and inter-comparing GPM IMERG (Integrated Multi-satelliE Retrievals for GPM) half-hourly and monthly precipitation

Introduction of Software Products and Services Through "Public" Beta Launches

OpenAIRE

Amit Mehra; Gireesh Shrimali

2008-01-01

Public “Beta” launches have become a preferred route of entry into the markets for new software products and web site based services. While beta testing of novel products is nothing new, typically such tests were done by experts within firm boundaries. What makes public beta testing so attractive to firms? By introducing semi-completed products in the market, the firm can target the early adopter population, who can then build the potential market through the word of mouth effect by the time ...

Estimating the Service Lives of Building Products in Use

NARCIS (Netherlands)

Straub, A.

2015-01-01

Reliable service life data of building products are of great importance when completing environmental LCA (life cycle assessment) reviews, for LCC (life cycle costing) and for maintenance planning tasks. A research project was set up to answer the following research questions: (1) what are reliable

Particle size studies in the preparation of AQCS reference materials

International Nuclear Information System (INIS)

Fajgelj, A.; Zeisler, R.; Benesch, T.; Dekner, R.

1994-01-01

Particle size determination is one of the important steps in the characterization of physical properties of each particulate material. However, particle size distribution effects also a chemical composition of the material in terms of homogeneity and representativeness of the sample, as well as allows or not a possible sub-sampling of the material. All this is of great importance in the preparation of reference materials for which the chemical composition and physical properties have to be extremely well characterized. In the present paper we intend to present same efforts which have been done by Analytical Quality Control Services (AQCS) of the International Atomic Energy Agency (IAEA) in the field of particle size determination in the production of reference materials. The Malvern product MasterSizer X, based on laser light scattering is used for this purpose and the technique is also shortly discussed. (author)

The perception of quality mapping product and service quality to consumer perceptions

CERN Document Server

Kenyon, George N

2015-01-01

Exploring the concept of quality management from a new point of view, this book presents a holistic model of how consumers judge the quality of products. It links consumer perceptions of quality to the design and delivery of the final product, and presents models and methods for improving the quality of these products and services. It offers readers an improved understanding of how and why the design process must consider how the consumer will perceive a product or service. In order to facilitate the presentation and understanding of these concepts, illustrations and case examples are also provided throughout the book.   This book provides an invaluable resource for managers, designers, manufacturers, professional practitioners and academics interested in quality management. It also offers a useful supplementary text for marketing and quality management courses.

Service Modeling for Service Engineering

Science.gov (United States)

Shimomura, Yoshiki; Tomiyama, Tetsuo

Intensification of service and knowledge contents within product life cycles is considered crucial for dematerialization, in particular, to design optimal product-service systems from the viewpoint of environmentally conscious design and manufacturing in advanced post industrial societies. In addition to the environmental limitations, we are facing social limitations which include limitations of markets to accept increasing numbers of mass-produced artifacts and such environmental and social limitations are restraining economic growth. To attack and remove these problems, we need to reconsider the current mass production paradigm and to make products have more added values largely from knowledge and service contents to compensate volume reduction under the concept of dematerialization. Namely, dematerialization of products needs to enrich service contents. However, service was mainly discussed within marketing and has been mostly neglected within traditional engineering. Therefore, we need new engineering methods to look at services, rather than just functions, called "Service Engineering." To establish service engineering, this paper proposes a modeling technique of service.

Sustainable Sizing.

Science.gov (United States)

Robinette, Kathleen M; Veitch, Daisy

2016-08-01

To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically

Increasing off-service resident productivity while on their emergency department rotation using shift cards.

Science.gov (United States)

Chakravarthy, Bharath; Posadas, Emerson; Ibrahim, Deena; McArthur, Kurt; Osborn, Megan; Hoonpongsimanont, Wirachin; Wong, Andrew; Lotfipour, Shahram

2015-04-01

Differences in productivity between off-service residents rotating in the emergency department (ED) and their emergency medicine (EM) resident counterparts have never been directly quantified. We sought to quantify the difference between off-service residents rotating in the ED and their EM resident counterparts. We also sought to find whether shift cards could be used to increase the productivity of off-service residents rotating in the ED. This is a prospective cohort study conducted at an urban, tertiary, Level I trauma center. We implemented the use of shift cards for off-service residents during their EM rotation. Completion of the shift card involved recording patients seen and their dispositions, procedures done, and documenting a learned bedside teaching point from their shift that day. Productivity was measured in terms of patients seen per hour (PPH) and relative value units per hour (RVU/h). Off-service residents showed a productivity of 0.529 PPH (95% confidence interval [CI] 0.493-0.566) and 1.40 RVU/h (95% CI 1.28-1.53) prior to implementation of shift cards. With the introduction of shift cards, productivity increased to 0.623 PPH (95% CI 0.584-0.663, p = 0.001) and 1.77 RVU/h (95% CI 1.64-1.91, p = 0.001). In comparison, first year EM resident productivity was 0.970 PPH (95% CI 0.918-1.02) and 3.01 RVU/h (95% CI 2.83-3.19). Shift cards can be used to foster motivation for off-service residents rotating in the ED, and is a simple and cost-effective method to improve system-based practices and utilization of resources. Copyright © 2015 Elsevier Inc. All rights reserved.

Competency Based Curriculum for Clothing Services and Production Sewing.

Science.gov (United States)

Blake, Charlotte

Designed to meet individual needs and learning levels of high school and postsecondary students enrolled in vocational training for occupations in clothing services and production sewing, this competency-based curriculum teaches skills in alterations, dressmaking, and power sewing machine operations. Skills are organized into 13 units: Awareness…

New Global Precipitation Products and Data Service Updates at the NASA GES DISC

Science.gov (United States)

Liu, Z.; Ostrenga, D.; Savtchenko, A.; DeShong, B.; Greene, M.; Vollmer, B.; Kempler, S.

2016-01-01

This poster describes recent updates of the ongoing GPM data service activities at the NASA Goddard Earth Sciences (GES) Data and Information Services Center(DISC) to facilitate access and exploration of GPM, TRMM and other NASA precipitation datasets for the global community. The poster contains -Updates on GPM products and data services -New features in Giovanni for precipitation data visualization -Precipitation data and service outreach activities.

Towards assessing Product/Service-Systems (PSS) within the Danish maritime industry: A PSS positioning map

DEFF Research Database (Denmark)

Hsuan, Juliana; Andersen, Jakob Axel Bejbro; Bey, Niki

2012-01-01

In response to requirements resulting from a changing business landscape from solely physical-product-based value creation towards performance-based value creation, this paper presents a questionnaire-based matrix, the PSS Categorization Matrix, that is developed in order to help organizations find...... their position in terms of the balance between product-related and service-related activities. Judging from a workshop carried out with companies from the maritime industry and researchers in the area, the approach seems promising, but requires improvements on questionnaire and Matrix. These need to incorporate...... further improvements regarding the factor of time and the applicability related to product/service portfolios, as opposed to single product/services. The authors already plan further research on the identified issues....

Innovative assistive technology in Finnish public elderly-care services: a focus on productivity.

Science.gov (United States)

Melkas, Helinä

2013-01-01

The study investigates ways in which technology use may help municipalities improve productivity in elderly-care services. A case study of Finnish elderly-care services provides responses concerning impacts, decisions and options in technology use. The research data were collected during a 'smart home pilot' implemented in four housing service units. Over 60 assistive devices were introduced in the smart homes used during short-term housing periods. Both customers and care staff's experiences as well as processes related to the use of assistive devices were investigated on the basis of survey questionnaires, interviews and feedback. Assistive device-related operational processes were investigated with the help of concepts of 'resource focus', 'lost motion' and 'intermediate storage'. Four central operational processes were identified. Design and desirability as well as costs, such as opportunity costs of assistive devices were also a focus. Significant factors related to productivity were disclosed in this way. Technology use versus productivity needs to be 'circled' from the points of view of individual users, workplaces, service processes, and larger technology options. There must be long-term patience to introduce technology properly into use to produce positive impacts on productivity. Customers and care staff have an interlinked, vital role to play as decision-makers' informants.

Production-logistic system in the aspect of strategies for production planning and control and for logistic customer service

Directory of Open Access Journals (Sweden)

Łukasz Hadaś

2014-09-01

Full Text Available Background: The authors made multi-dimensional review of production and logistic strategies in order to prove their coherence in shaping internal and external supply chain. The paper is concluded with definition of production-logistic system as an object of modeling in transformation of business systems of manufacturing companies. Material and methods: The paper is based on analysis of state of the art presented in the literature on the subject of production and logistics strategies. Publications of key importance were selected to identify genesis and basic assumptions of strategies and their functioning. Comparative synthesis of logistic and production strategies identified is developed with respect to authors' experience in application of predefined tools and methods characteristic for strategies identified. Results: The result of the work conducted is consolidation of production and logistic strategies according to multi-variant customer service and original definition of production and logistic system. Conclusions: Production system and logistic system can and should be treated as equal elements in context of material flows management in internal and external supply chains. Such approach enables modeling of both systems as coherent elements realizing selected strategy of customer service.     

Community-based productivity veterinary service for smallholder dairy farmers in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Shamsuddin, M; Bhattacharjee, J; Talukdar, A.K., E-mail: m.shamsuddin@cdvf.org.b [Department of Surgery and Obstetrics, Bangladesh Agricultural University, Mymensingh (Bangladesh); Goodger, W J; Momont, H [Department of Medical Sciences, School of Veterinary Medicine, University of Wisconsin-Madison, Wisconsin (United States); Frank, G [Department of Agricultural Economics, University of Wisconsin-Madison, Wisconsin (United States); Akhteruzzaman, M [Department of Agricultural Economics, Bangladesh Agricultural University, Mymensingh (Bangladesh)

2010-07-01

The productivity veterinary services, which include disease control and management of reproduction, udder health and nutrition, are not practised in smallholder dairy farms although they are proven to increase milk production in large dairy herds. We introduced an on-farm service with the participation of farmer associations where individual veterinarians made a scheduled visit to perform preventive and emergency cattle health care, reproduction, and feed management. We examined 1 849 animals on 862 farms guided by specific forms, a breeding calendar and a herd summary generated from data of the initial visit by using a Microsoft Access based computer application. On average, 53% anoestrous heifers and 67% anoestrous cows resumed their oestrous cycle when treated with hormones, vitamin AD{sub 3}E or nutritional supplements. Forty percent of cows with uterine infections conceived when treated with intrauterine antibiotics or prostaglandin F{sub 2{alpha}} (PGF{sub 2{alpha}}) was injected intramuscularly before artificial insemination (AI) was done. When GnRH was injected at the time of AI, 73% repeat breeder cows conceived. About 78% of cows recovered from mastitis and 88% of sick animals recovered when treatment was given based on clinical diagnosis. A database on common cattle diseases was established. More than 75% of farms that received the service had an income increase ranging from US$1 to US$40.7/month/cow. Productivity veterinary services can increase farmers' incomes and the number of cows available for breeding. (author)

Oak Ridge Isotope Products and Services - Current and Expected Supply and Demand

International Nuclear Information System (INIS)

Aaron, W.S.; Alexander, C.W.; Cline, R.L.; Collins, E.D.; Klein, J.A.; Knauer, J.B. Jr.; Mirzadeh, S.

1999-01-01

Oak Ridge National Laboratory (ORNL) has been a major center of isotope production research, development, and distribution for over 50 years. Currently, the major isotope production activities include (1) the production of transuranium element radioisotopes, including 252 Cf; (2) the production of medical and industrial radioisotopes; (3) maintenance and expansion of the capabilities for production of enriched stable isotopes; and, (4) preparation of a wide range of custom-order chemical and physical forms of isotope products, particularly in accelerator physics research. The recent supply of and demand for isotope products and services in these areas, research and development (R ampersand D), and the capabilities for future supply are described in more detail below. The keys to continuing the supply of these important products and services are the maintenance, improvement, and potential expansion of specialized facilities, including (1) the High Flux Isotope Reactor (HFIR), (2) the Radiochemical Engineering Development Center (REDC) and Radiochemical Development Laboratory (RDL) hot cell facilities, (3) the electromagnetic calutron mass separators and the plasma separation process equipment for isotope enrichment, and (4) the Isotope Research Materials Laboratory (IRML) equipment for preparation of specialized chemical and physical forms of isotope products. The status and plans for these ORNL isotope production facilities are also described below

Some Comments on Marketing AIP Information Products and Services.

Science.gov (United States)

King, Donald W.; Brown, A. M.

This study was addressed to marketing considerations for the American Institute of Physics (AIP) information products and services. The general system and its operation in a marketing environment, including promotion, channels of distribution and pricing are covered. Particular emphasis is placed on the cost/demand/price relationship for four…

Complex Incremental Product Innovation in Established Service Firms: A Micro Institutional Perspective

OpenAIRE

Vermeulen, Patrick; Bosch, Frans; Volberda, Henk

2007-01-01

textabstractMany product innovation studies have described key determinants that should lead to successful incremental product innovation. Despite numerous studies suggesting how incremental product innovation should be successfully undertaken, many firms still struggle with this type of innovation. In this paper, we use an institutional perspective to investigate why established firms in the financial services industry struggle with their complex incremental product innovation efforts. We ar...

AN INVESTIGATION INTO MEDIUM-SIZED MULTINATIONAL ENTERPRISES

Directory of Open Access Journals (Sweden)

Daniele Schilirò

2013-09-01

Full Text Available The paper provides an investigation of medium-sized Italian industrial enterprises that have become multinational companies. It concetrates on the set of medium and medium-large enterprises who seem to grow more in foreign markets, either through exports or through foreign direct investment. The work also offers a descriptive empirical picture of the performance of medium-sized Italian multinationals, which is compared with the performance of large corporations. From this analysis, which is based on several data sources, it is possible to outline a profile regarding the medium-size italian multinational enterprises; the aim is to understand the complex strategy towards internationalization of these companies, where the dimension of production is important and, therefore, innovation has a key role. Also the commercial dimension is crucial, because it leads to point to the direct supervision of foreign markets and to look very carefully at the customers, offering them a wide range of services. Finally, the paper highlights some critical issues that the medium sized multinational enterprises have to face for competing: namely, the stagnant productivity, the high taxation, the insufficient institutional support for internationalization, the bureaucracy and its high costs, the lack of skilled human capital available in the labor market due to inadequate policy training.

Analyzing Lifestyle and Consumption Pattern of Hire Groups under Product Service Systems in Taiwan

Directory of Open Access Journals (Sweden)

Jui-Che Tu

2013-01-01

Full Text Available This study explores the characteristics of rental goods, integrates the green concept in the design and development, and introduces the concept of product service into the rental consumption trend in Taiwan. This study takes the questionnaire survey to collect various opinions of the consumers to rental consumption and also classifies the Taiwanese consumers into five clusters based on the life styles, and the names of clusters are simple financial management cluster, environment and taste cluster, fashionable and flexible cluster, careful purchase cluster, and smart consumption cluster. Finally, conclusions are as follows. (1 The green consumption cognition and attitude of the consumers to the environmental goods can help to master the factor of green consumption property for developing the rental commodities. (2 The market segmentation of the rental consumption market can be enhanced by the variables of available life styles. (3 The applications with product service rental characteristics should take the opinion feedback of the consumers into the sustainable product development conditions and expand the service property of the product. (4 As the cost of cradle-to-cradle recycling pattern is high, the support and promotion of the government can help to construct the business model of product service rental consumption and develop the rental economy.

Sizing Optimization and Strength Analysis for Spread-type Gear Reducers

Directory of Open Access Journals (Sweden)

Wei-Hsuan Hsu

2014-08-01

Full Text Available A reducer is now developed towards the trend of customization service and cost-saving. In this study, a sizing program for the reducer has been developed in order to replace the manual sizing process. We aim at the total center distance of the gear reducer for optimization to reduce gear volume and weight. Also, we checked constrains such as, tooth root bending, tooth contact strength, gear shaft endangered cross-section, bearing life, gear shaft deflection, and torsion angle deformation, etc., to obtain reliable drive strength. Comparisons of sizes and weights before and after optimization confirm that the purpose for reducing production cost is achieved.

Architectural Decision Management for Digital Transformation of Products and Services

Directory of Open Access Journals (Sweden)

Alfred Zimmermann

2016-04-01

Full Text Available The digitization of our society changes the way we live, work, learn, communicate, and collaborate. The Internet of Things, Enterprise Social Networks, Adaptive Case Management, Mobility systems, Analytics for Big Data, and Cloud services environments are emerging to support smart connected products and services and the digital transformation. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self-optimizing and resilient run-time environments for intelligent business services and service-oriented enterprise architectures. Our aim is to support flexibility and agile transformations for both business domains and related information technology. The present research paper investigates mechanisms for decision analytics in the context of multi-perspective explorations of enterprise services and their digital enterprise architectures by extending original architecture reference models with state of art elements for agile architectural engineering for the digitization and collaborative architectural decision support. The paper’s context focuses on digital transformations of business and IT and integrates fundamental mappings between adaptable digital enterprise architectures and service-oriented information systems. We are putting a spotlight on the example domain – Internet of Things.

Global Land Data Assimilation System (GLDAS) Products, Services and Application from NASA Hydrology Data and Information Services Center (HDISC)

Science.gov (United States)

Fang, Hongliang; Beaudoing, Hiroko K.; Rodell, matthew; Teng, William L.; Vollmer, Bruce E.

2009-01-01

The Global Land Data Assimilation System (GLDAS) is generating a series of land surface state (e.g., soil moisture and surface temperature) and flux (e.g., evaporation and sensible heat flux) products simulated by four land surface models (CLM, Mosaic, Noah and VIC). These products are now accessible at the Hydrology Data and Information Services Center (HDISC), a component of the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). Current data holdings include a set of 1.0 degree resolution data products from the four models, covering 1979 to the present; and a 0.25 degree data product from the Noah model, covering 2000 to the present. The products are in Gridded Binary (GRIB) format and can be accessed through a number of interfaces. Users can search the products through keywords and perform on-the-fly spatial and parameter subsetting and format conversion of selected data. More advanced visualization, access and analysis capabilities will be available in the future. The long term GLDAS data are used to develop climatology of water cycle components and to explore the teleconnections of droughts and pluvial.

Mean size among the particles of short-lived radon daughter products in the atmosphere

International Nuclear Information System (INIS)

Nakatani, S.

1980-01-01

The diffusion-battery method is used to classify the radioactive particles according to their sizes. The diffusion coefficient is determined from the fractional penetration of the particles through the battery. Particle radii are derived from the diffusion coefficients with the Stokes-Cunningham-Millikan formula. At the exit and entrance of the battery, individual concentrations of radon daughter products 218 Po, 214 Pb, 214 Bi are determined. Thus the mean sizes of individual radon daughters can be obtained from the fractional penetration of individual nuclides through the diffusion battery. Despite large statistical fluctuations the mean size of 214 Bi is always shifted toward the larger size region as compared with those of other radionuclides

Integrating forest products with ecosystem services: a global perspective

Science.gov (United States)

Robert L. Deal; Rachel. White

2012-01-01

Around the world forests provide a broad range of vital ecosystem services. Sustainable forest management and forest products play an important role in global carbon management, but one of the major forestry concerns worldwide is reducing the loss of forestland from development. Currently, deforestation accounts for approximately 20% of total greenhouse gas emissions....

Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry

Energy Technology Data Exchange (ETDEWEB)

Stuart, Elizabeth [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Larsen, Peter H. [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Goldman, Charles A. [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Gilligan, Donald [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); National Association of Energy Services Companies

2013-06-27

In this study, we analyze the market size, growth projections and industry trends in the U.S. ESCO industry, drawing on information from interviews with ESCO executives conducted in late 2012. We define ESCOs as energy service companies for whom performance -based contracting is a key business activity; 45 companies met our definition of an ESCO. We were able to interview 35 of these companies, which represents ~78% response rate. The non-respondent ESCOs were small companies in terms of revenue, representing about 2% of industry revenues.

Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Hagendorfer, Harald, E-mail: Harald.Hagendorfer@empa.c [EMPA, Swiss Federal Laboratories for Materials Testing and Research (Switzerland); Lorenz, Christiane, E-mail: Christiane.Lorenz@chem.ethz.c [ETHZ, Swiss Federal Institute of Technology Zurich (Switzerland); Kaegi, Ralf, E-mail: Ralf.Kaegi@eawag.ch; Sinnet, Brian, E-mail: Brian.Sinnet@eawag.c [EAWAG, Swiss Federal Institute of Aquatic Science and Technology (Switzerland); Gehrig, Robert, E-mail: Robert.Gehrig@empa.c [EMPA, Swiss Federal Laboratories for Materials Testing and Research (Switzerland); Goetz, Natalie V., E-mail: Natalie.vonGoetz@chem.ethz.ch; Scheringer, Martin, E-mail: Martin.Scheringer@chem.ethz.c [ETHZ, Swiss Federal Institute of Technology Zurich (Switzerland); Ludwig, Christian, E-mail: Christian.Ludwig@psi.c [PSI, Paul Scherrer Institue (Switzerland); Ulrich, Andrea, E-mail: Andrea.Ulrich@empa.c [EMPA, Swiss Federal Laboratories for Materials Testing and Research (Switzerland)

2010-09-15

This study describes methods developed for reliable quantification of size- and element-specific release of engineered nanoparticles (ENP) from consumer spray products. A modified glove box setup was designed to allow controlled spray experiments in a particle-minimized environment. Time dependence of the particle size distribution in a size range of 10-500 nm and ENP release rates were studied using a scanning mobility particle sizer (SMPS). In parallel, the aerosol was transferred to a size-calibrated electrostatic TEM sampler. The deposited particles were investigated using electron microscopy techniques in combination with image processing software. This approach enables the chemical and morphological characterization as well as quantification of released nanoparticles from a spray product. The differentiation of solid ENP from the released nano-sized droplets was achieved by applying a thermo-desorbing unit. After optimization, the setup was applied to investigate different spray situations using both pump and gas propellant spray dispensers for a commercially available water-based nano-silver spray. The pump spray situation showed no measurable nanoparticle release, whereas in the case of the gas spray, a significant release was observed. From the results it can be assumed that the homogeneously distributed ENP from the original dispersion grow in size and change morphology during and after the spray process but still exist as nanometer particles of size <100 nm. Furthermore, it seems that the release of ENP correlates with the generated aerosol droplet size distribution produced by the spray vessel type used. This is the first study presenting results concerning the release of ENP from spray products.

Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles

International Nuclear Information System (INIS)

Hagendorfer, Harald; Lorenz, Christiane; Kaegi, Ralf; Sinnet, Brian; Gehrig, Robert; Goetz, Natalie V.; Scheringer, Martin; Ludwig, Christian; Ulrich, Andrea

2010-01-01

This study describes methods developed for reliable quantification of size- and element-specific release of engineered nanoparticles (ENP) from consumer spray products. A modified glove box setup was designed to allow controlled spray experiments in a particle-minimized environment. Time dependence of the particle size distribution in a size range of 10-500 nm and ENP release rates were studied using a scanning mobility particle sizer (SMPS). In parallel, the aerosol was transferred to a size-calibrated electrostatic TEM sampler. The deposited particles were investigated using electron microscopy techniques in combination with image processing software. This approach enables the chemical and morphological characterization as well as quantification of released nanoparticles from a spray product. The differentiation of solid ENP from the released nano-sized droplets was achieved by applying a thermo-desorbing unit. After optimization, the setup was applied to investigate different spray situations using both pump and gas propellant spray dispensers for a commercially available water-based nano-silver spray. The pump spray situation showed no measurable nanoparticle release, whereas in the case of the gas spray, a significant release was observed. From the results it can be assumed that the homogeneously distributed ENP from the original dispersion grow in size and change morphology during and after the spray process but still exist as nanometer particles of size <100 nm. Furthermore, it seems that the release of ENP correlates with the generated aerosol droplet size distribution produced by the spray vessel type used. This is the first study presenting results concerning the release of ENP from spray products.

Plasma-arc reactor for production possibility of powdered nano-size materials

International Nuclear Information System (INIS)

Hadzhiyski, V; Mihovsky, M; Gavrilova, R

2011-01-01

Nano-size materials of various chemical compositions find increasing application in life nowadays due to some of their unique properties. Plasma technologies are widely used in the production of a range of powdered nano-size materials (metals, alloys, oxides, nitrides, carbides, borides, carbonitrides, etc.), that have relatively high melting temperatures. Until recently, the so-called RF-plasma generated in induction plasma torches was most frequently applied. The subject of this paper is the developments of a new type of plasma-arc reactor, operated with transferred arc system for production of disperse nano-size materials. The new characteristics of the PLASMALAB reactor are the method of feeding the charge, plasma arc control and anode design. The disperse charge is fed by a charge feeding system operating on gravity principle through a hollow cathode of an arc plasma torch situated along the axis of a water-cooled wall vertical tubular reactor. The powdered material is brought into the zone of a plasma space generated by the DC rotating transferred plasma arc. The arc is subjected to Auto-Electro-Magnetic Rotation (AEMR) by an inductor serially connected to the anode circuit. The anode is in the form of a water-cooled copper ring. It is mounted concentrically within the cylindrical reactor, with its lower part electrically insulated from it. The electric parameters of the arc in the reactor and the quantity of processed charge are maintained at a level permitting generation of a volumetric plasma discharge. This mode enables one to attain high mean mass temperature while the processed disperse material flows along the reactor axis through the plasma zone where the main physico-chemical processes take place. The product obtained leaves the reactor through the annular anode, from where it enters a cooling chamber for fixing the produced nano-structure. Experiments for AlN synthesis from aluminium power and nitrogen were carried out using the plasma reactor

Productivity growth, case mix and optimal size of hospitals. A 16-year study of the Norwegian hospital sector.

Science.gov (United States)

Anthun, Kjartan Sarheim; Kittelsen, Sverre Andreas Campbell; Magnussen, Jon

2017-04-01

This paper analyses productivity growth in the Norwegian hospital sector over a period of 16 years, 1999-2014. This period was characterized by a large ownership reform with subsequent hospital reorganizations and mergers. We describe how technological change, technical productivity, scale efficiency and the estimated optimal size of hospitals have evolved during this period. Hospital admissions were grouped into diagnosis-related groups using a fixed-grouper logic. Four composite outputs were defined and inputs were measured as operating costs. Productivity and efficiency were estimated with bootstrapped data envelopment analyses. Mean productivity increased by 24.6% points from 1999 to 2014, an average annual change of 1.5%. There was a substantial growth in productivity and hospital size following the ownership reform. After the reform (2003-2014), average annual growth was case mix between hospitals, and thus provides a framework for future studies. The study adds to the discussion on optimal hospital size. Copyright © 2017 Elsevier B.V. All rights reserved.

The Impact of Product and Service Modularity on Servitization Strategy

DEFF Research Database (Denmark)

Frandsen, Thomas; Hsuan, Juliana

Manufacturers are increasingly bundling products with service offerings as integrated solutions to improve competitiveness. Based on case research and an industry workshop, we report on how value propositions can be extended through servitization, and how companies should strategize in order...

What are the Dominant Factors of Students’ Productive Skills in Construction Services?

Science.gov (United States)

Oroh, R. R.; S, Haris A.; Sugandi, R. M.; Isnandar

2018-02-01

The purpose of this study to determine the dominant factors of students’ productive skills in doing the work of concrete structures that fit the needs of construction services. Sample of the respondents is vocational high school students from several districts and cities in North Sulawesi, Indonesia. Data are obtained through the performance test instruments of student. Whereas, data analysis is performed using factor analysis. The result of this research show the dominant factors of the students’ productive skills in doing the work of concrete structures that is according to the need of construction services, namely: (a) factor the working of concrete casting consists of making scaffolding from good materials and conducting concrete casting according to working method; and (b) factor the working of concrete reinforcing consists of read the working drawings for concrete reinforcement and make the concrete formwork from good material. Some of the respondent’s students in doing some concrete structure work have done well, but not yet according to working drawings, working methods and technical specifications of the work. The learning is done in accordance with the competency-oriented school curriculum but the teaching materials given have not been maximized in accordance with the needs of productive skills required construction services industry. The results have an impact on the low absorption of graduates in the implementation of the construction services industry.

Soil Functional Zone Management: A Vehicle for Enhancing Production and Soil Ecosystem Services in Row-Crop Agroecosystems.

Science.gov (United States)

Williams, Alwyn; Kane, Daniel A; Ewing, Patrick M; Atwood, Lesley W; Jilling, Andrea; Li, Meng; Lou, Yi; Davis, Adam S; Grandy, A Stuart; Huerd, Sheri C; Hunter, Mitchell C; Koide, Roger T; Mortensen, David A; Smith, Richard G; Snapp, Sieglinde S; Spokas, Kurt A; Yannarell, Anthony C; Jordan, Nicholas R

2016-01-01

There is increasing global demand for food, bioenergy feedstocks and a wide variety of bio-based products. In response, agriculture has advanced production, but is increasingly depleting soil regulating and supporting ecosystem services. New production systems have emerged, such as no-tillage, that can enhance soil services but may limit yields. Moving forward, agricultural systems must reduce trade-offs between production and soil services. Soil functional zone management (SFZM) is a novel strategy for developing sustainable production systems that attempts to integrate the benefits of conventional, intensive agriculture, and no-tillage. SFZM creates distinct functional zones within crop row and inter-row spaces. By incorporating decimeter-scale spatial and temporal heterogeneity, SFZM attempts to foster greater soil biodiversity and integrate complementary soil processes at the sub-field level. Such integration maximizes soil services by creating zones of 'active turnover', optimized for crop growth and yield (provisioning services); and adjacent zones of 'soil building', that promote soil structure development, carbon storage, and moisture regulation (regulating and supporting services). These zones allow SFZM to secure existing agricultural productivity while avoiding or minimizing trade-offs with soil ecosystem services. Moreover, the specific properties of SFZM may enable sustainable increases in provisioning services via temporal intensification (expanding the portion of the year during which harvestable crops are grown). We present a conceptual model of 'virtuous cycles', illustrating how increases in crop yields within SFZM systems could create self-reinforcing feedback processes with desirable effects, including mitigation of trade-offs between yield maximization and soil ecosystem services. Through the creation of functionally distinct but interacting zones, SFZM may provide a vehicle for optimizing the delivery of multiple goods and services in

Soil functional zone management: a vehicle for enhancing production and soil ecosystem services in row-crop agroecosystems

Directory of Open Access Journals (Sweden)

Alwyn eWilliams

2016-02-01

Full Text Available There is increasing global demand for food, bioenergy feedstocks and a wide variety of bio-based products. In response, agriculture has advanced production, but is increasingly depleting soil regulating and supporting ecosystem services. New production systems have emerged, such as no-tillage, that can enhance soil services but may limit yields. Moving forward, agricultural systems must reduce trade-offs between production and soil services. Soil functional zone management (SFZM is a novel strategy for developing sustainable production systems that attempts to integrate the benefits of conventional, intensive agriculture and no-tillage. SFZM creates distinct functional zones within crop row and inter-row spaces. By incorporating decimetre-scale spatial and temporal heterogeneity, SFZM attempts to foster greater soil biodiversity and integrate complementary soil processes at the sub-field level. Such integration maximizes soil services by creating zones of ‘active turnover’, optimized for crop growth and yield (provisioning services; and adjacent zones of ‘soil building’, that promote soil structure development, carbon storage and moisture regulation (regulating and supporting services. These zones allow SFZM to secure existing agricultural productivity while avoiding or minimizing trade-offs with soil ecosystem services. Moreover, the specific properties of SFZM may enable sustainable increases in provisioning services via temporal intensification (expanding the portion of the year during which harvestable crops are grown. We present a conceptual model of ‘virtuous cycles’, illustrating how increases in crop yields within SFZM systems could create self-reinforcing feedback processes with desirable effects, including mitigation of trade-offs between yield maximization and soil ecosystem services. Through the creation of functionally distinct but interacting zones, SFZM may provide a vehicle for optimizing the delivery of multiple

Wound center facility billing: A retrospective analysis of time, wound size, and acuity scoring for determining facility level of service.

Science.gov (United States)

Fife, Caroline E; Walker, David; Farrow, Wade; Otto, Gordon

2007-01-01

Outpatient wound center facility reimbursement for Medicare beneficiaries can be a challenge to determine and obtain. To compare methods of calculating facility service levels for outpatient wound centers and to demonstrate the advantages of an acuity-based billing system (one that incorporates components of facility work that is non-reimbursable by procedure codes and that represents an activity-based costing approach to medical billing), a retrospective study of 5,098 patient encounters contained in a wound care-specific electronic medical record database was conducted. Approximately 500 patient visits to the outpatient wound center of a Texas regional hospital between April 2003 and November 2004 were categorized by service level in documentation and facility management software. Visits previously billed using a time-based system were compared to the Centers for Medicare and Medicaid Services' proposed three-tiered wound size-based system. The time-based system also was compared to an acuity-based scoring system. The Pearson correlation coefficient between billed level of service by time and estimated level of service by acuity was 0.442 and the majority of follow-up visits were billed as Level 3 and above (on a time level of 1 to 5) , confirming that time is not a surrogate for actual work performed. Wound size also was found to be unrelated to service level (Pearson correlation = 0.017) and 97% of wound areas were billings than extremes; no other method produced this distribution. Hospital-based outpatient wound centers should develop, review, and refine acuity score-based models on which to determine billed level of service.

78 FR 41129 - Market Test of Experimental Product - International Merchandise Return Service-Non-Published Rates

Science.gov (United States)

2013-07-09

...--Non-Published Rates AGENCY: U.S. Postal Service\\TM\\. ACTION: Notice. SUMMARY: The Postal Service hereby gives notice of a market test for International Merchandise Return Service--Non-Published Rates in... Return Service (IMRS) Non-published Rate (NPR) experimental product on August 15, 2013. The Postal...

Productivity in public welfare services is changing: the standpoint of strategic competence-based management.

Science.gov (United States)

Ollila, Seija

2013-01-01

In Finland the municipal restructuring project was launched in 2005. Its goal is to create a system that ensures high-quality municipal welfare services for everyone, continuing into the future. The main focus of this research is to examine the tension between strategic competence-based management and productivity in public welfare services. The theoretical basis covers theories regarding strategic competence-based management and productivity. To guarantee services and quality it is important to strengthen the supply of employees, competence, development, leverage, and benefits in public organizations. Leadership has a significant role in strategic competence-based management.

Farm size, land yields, and the agricultural production function: an analysis for fifteen developing countries

Energy Technology Data Exchange (ETDEWEB)

Cornia, G A

1985-04-01

This paper analyzes the relationship between factor inputs, land yields, and labor productivity for farms of different size on the basis of FAO farm management data for 15 developing countries. For all but three countries a strong negative correlation is found between farm size on the one side, and factor inputs and yields per hectare on the other. The fitting of unconstrained production functions to the above data suggests that in only few cases can the decline in yields for increasing farm size be attributed to decreasing returns to scale. The higher yields observed in small farms are mainly to be ascribed to higher factor inputs and to a more intensive use of land. Therefore, where conspicuous labor surpluses exist, the superiority of small farming provides solid arguments in favor of land redistribution. Such an agrarian reform would determine higher output, higher labor absorption and a more equitable income distribution, thus contributing in a decisive manner to the alleviation of rural poverty. The paper also provides estimates of cross-sectional production functions for the 15 countries analyzed. Empirical relations are found between the output elasticities of land, labor, and intermediate inputs and physical indicators of their scarcity. The paper concludes by proposing a simple method for deriving a long-term production function for agriculture. 23 references, 3 figures, 6 tables.

Interactive effects among ecosystem services and management practices on crop production: pollination in coffee agroforestry systems.

Science.gov (United States)

Boreux, Virginie; Kushalappa, Cheppudira G; Vaast, Philippe; Ghazoul, Jaboury

2013-05-21

Crop productivity is improved by ecosystem services, including pollination, but this should be set in the context of trade-offs among multiple management practices. We investigated the impact of pollination services on coffee production, considering variation in fertilization, irrigation, shade cover, and environmental variables such as rainfall (which stimulates coffee flowering across all plantations), soil pH, and nitrogen availability. After accounting for management interventions, bee abundance improved coffee production (number of berries harvested). Some management interventions, such as irrigation, used once to trigger asynchronous flowering, dramatically increased bee abundance at coffee trees. Others, such as the extent and type of tree cover, revealed interacting effects on pollination and, ultimately, crop production. The effects of management interventions, notably irrigation and addition of lime, had, however, far more substantial positive effects on coffee production than tree cover. These results suggest that pollination services matter, but managing the asynchrony of flowering was a more effective tool for securing good pollination than maintaining high shade tree densities as pollinator habitat. Complex interactions across farm and landscape scales, including both management practices and environmental conditions, shape pollination outcomes. Effective production systems therefore require the integrated consideration of management practices in the context of the surrounding habitat structure. This paper points toward a more strategic use of ecosystem services in agricultural systems, where ecosystem services are shaped by the coupling of management interventions and environmental variables.

The Impact of Free Riding on Price and Service Competition in the Presence of E-Commerce Retailers

OpenAIRE

Steven Strauss

2002-01-01

An extensive literature has focused on price competition and the Internet; however, little attention has been given to the Internet's impact on service competition. Services include activities such as the provision of product information, repairs, faster checkout, after-sales advice/information, retail advertising, certification of products by limiting the available assortment size, and the ability to examine/test merchandise. A consumer "free rides" when the customer uses services at one ret...

New Balancing Equipment for Mass Production of Small and Medium-Sized Electrical Machines

DEFF Research Database (Denmark)

Argeseanu, Alin; Ritchie, Ewen; Leban, Krisztina Monika

2010-01-01

The level of vibration and noise is an important feature. It is good practice to explain the significance of the indicators of the quality of electrical machines. The mass production of small and medium-sized electrical machines demands speed (short typical measurement time), reliability...

The oil and oil services industry international context 2008

International Nuclear Information System (INIS)

Serbutoviez, S.; Silva, C.

2008-11-01

Oil companies rarely do their own major work within the framework of their investments or in the operation of their facilities. They most often act as project coordinators, thereby opening up a vast market for equipment, services and engineering, involving many companies of widely-varying sizes, which constitute the oil services industry. This document provides a panorama of the international oil context in three distinct parts, for 2007, for the first three quarters of 2008, and aspects of trends for 2009. - The first part is devoted to a rapid description of the oil context and the economic environment in which it is evolving. - The second part examines the evolution of world investment in exploration-production (E and P) activities, distinguishing the investments made by oil and oil product/service companies throughout the E and P chain from the more targeted ones of three specific sectors: seismic, drilling and the construction of offshore production equipment. These markets are observed exclusively for oil product/service companies. - The last part is devoted to investments in the refining sector, focusing on the changes in the fundamentals, particularly the equilibrium between refining capacities and medium- term oil demand. This latter analysis involves both oil and oil product/service companies. (authors)

Consumer-Based Brand Equity of Products and Services: Assessing a Measurement Model with Competing Brands

Directory of Open Access Journals (Sweden)

Rafael Barreiros Porto

2018-04-01

Full Text Available  Objective: Identifying which brand in a category conveys more or less value to the consumer raises questions about the composition of brand equity measures and the brands that make up the category. Measures to identify Consumer-Based Brand Equity (CBBE may include functional assessments of consumer’s brand choice and firms’ brand performance, as long as they embrace competing brands. In view of this, this study comes up with a validation of a measurement model of Consumer-Based Brand Equity for competing brands of products and services, testing for possible moderation (product / service and experienced / non-experienced consumers. Method: Appraising 39 brands, the model was composed of 6 metrics: awareness, perceived quality, loyalty, association, exclusiveness and willingness to pay a price premium. Confirmatory factorial analysis revealed the CBBE structure and multigroup moderation tests showed the comparisons between products and services and between experienced and non-experienced consumers. Main Result: The metrics have convergent validity with very good model fit. The metrics are similar for products / services, but different for consumers with / without experience (evidence of moderation. Contributions: Based on this measure, researchers and marketers can identify whether their brand's performance has been perceived better or worse than that of their competitors. Relevance/Originality: This article is the first to offer a more complete scale to assess the consumer-based brand equity of products and services, allowing the researcher to compare the competitiveness between brands. 

Evidence of co-production in public service provision: the case of the administrative arbitration centre in Portugal

Directory of Open Access Journals (Sweden)

Hugo Consciência Silvestre

Full Text Available Abstract Co-production includes all actions where citizens assist, as volunteers, in the provision of services by public agencies in order to increase the efficiency and efficacy of the public services provided. This practice, known as co-production, is being adopted by governments in the resolution of conflicts, particularly those regarding administrative and fiscal matters. However, is co-production a more efficient and effective way of settling disputes in administrative and tax areas than the traditional administrative model? And why? In Portugal, the Administrative Arbitration Centre was created in 2009 with the aim of resolving disputes between public administration and taxpayers/service users by means of co-production. The available data support the thesis that efficiency and efficacy are higher under the co-production model. Nevertheless, users are not totally satisfied since the costs associated with the use of this service provision model are also higher.

The Effect of Supply Disruptions on Customer Service Levels: a Case for Delivering Fertilizer Products using Maritime Transportation

Science.gov (United States)

Siswanto, N.; Kurniawati, U.; Wiratno, S. E.; Rusdiansyah, A.

2018-04-01

Delivering a product to customers can have a series of activities. It starts with the production of the product and then transporting it to the customers. However, uncontrollable and undesirable chance of disruption can occur during the delivery either at the production facility/supply side or in the process of transporting the product. Many researches has been conducting in the process of delivering the product. However not many considers these disruptions, although the disruptions has negative impacts on company such as reduce the profit, produce unbalanced inventory, and affect its reputation. This research will focus on the effect of supply disruption on customer service levels in the maritime transportation problem in order to maintain inventory level both in the supply and destination warehouses during predetermined planning horizon. The system considered consists of one loading port and two discharge ports for distributing one product. By using discrete event simulation, the result showed that supply disruption affects unbalanced inventory in the destination warehouses so that it will also influence company’s service level. The results show that there is a significant decreasing both in delivery service level, about 14%, and production service level, about 15% when the disruption occurs. A scenario to increase production rate is simulated to improved the service level.

From LCA to PSS – Making leaps towards sustainability by applying product/service-system thinking in product development

DEFF Research Database (Denmark)

Bey, Niki; McAloone, Timothy Charles

2006-01-01

for optimisations on all system levels. However, as the act of ecodesign conventionally focuses on physical products, the search for potential optimisations is usually directed ‘downwards’, i.e. towards lower system levels, resulting in optimised components within products rather than optimised products within...... their surrounding systems. This paper will exemplify that when broadening the ecodesign horizon to environmental product/service-system (PSS) design, there is a better possibility of applying a system-oriented life cycle thinking approach, and therefore a potential to yield extreme improvements towards...

Relationships between annual plant productivity, nitrogen deposition and fire size in low-elevation California desert scrub

Science.gov (United States)

Rao, Leela E.; Matchett, John R.; Brooks, Matthew L.; Johns, Robert; Minnich, Richard A.; Allen, Edith B.

2014-01-01

Although precipitation is correlated with fire size in desert ecosystems and is typically used as an indirect surrogate for fine fuel load, a direct link between fine fuel biomass and fire size has not been established. In addition, nitrogen (N) deposition can affect fire risk through its fertilisation effect on fine fuel production. In this study, we examine the relationships between fire size and precipitation, N deposition and biomass with emphasis on identifying biomass and N deposition thresholds associated with fire spreading across the landscape. We used a 28-year fire record of 582 burns from low-elevation desert scrub to evaluate the relationship of precipitation, N deposition and biomass with the distribution of fire sizes using quantile regression. We found that models using annual biomass have similar predictive ability to those using precipitation and N deposition at the lower to intermediate portions of the fire size distribution. No distinct biomass threshold was found, although within the 99th percentile of the distribution fire size increased with greater than 125 g m–2 of winter fine fuel production. The study did not produce an N deposition threshold, but did validate the value of 125 g m–2 of fine fuel for spread of fires.

Food Production, Management, and Services. Baking. Teacher Edition. Second Edition.

Science.gov (United States)

Gibson, LeRoy

These instructional materials are intended for a course on food production, management, and services involved in baking. The following introductory information is included: use of this publication; competency profile; instructional/task analysis; related academic and workplace skills list; tools, materials, and equipment list; 13 references; and a…

Experience in applying lean production concepts in the service sector

Directory of Open Access Journals (Sweden)

Dyrina Evgeniya

2016-01-01

Full Text Available This article describes the experience of implementing lean production tools in the company services. The authors have based the research of the chef’s work, built Ishikawa’s diagram on one of the most important problems of the company and proposed the cyclogram of cooks at work. Problems were identified using this technology after analyzing domestic and foreign experience in implementing lean production. The algorithm for implementing lean production and the necessary tools for achievement of the goals of the enterprise were authored on the basis of experience gained analyses of theoretical materials, which were tested on the basis of the small business «White Dragon».

Product Service System Innovation in the Smart City

OpenAIRE

Cook, Matthew

2018-01-01

Product service systems (PSS) may usefully form part of the mix of innovations necessary to move society toward more sustainable futures. However, despite such potential, PSS implementation is highly uneven and limited. Drawing on an alternate socio-technical perspective of innovation, this paper provides fresh insights, on among other things the role of context in PSS innovation, to address this issue. Case study research is presented focusing on a use orientated PSS in an urban environment:...

Top of the food chain: Product services in the food industry

OpenAIRE

Dixon, Andrew M.; Simon, Matthew

2001-01-01

This paper aims to describe the environmental impact of the food industry supply chain and explore the potential for new product-service systems in the food sector, which has not been subject to a great deal of eco-design research. Data from a cross-sector analysis of UK industry, concentrating on the sectors representing the food industry supply chain, is utilised. These sectors are agriculture, food processing, retailing, food services, and kitchen equipment. The analysis combines economic ...

The AskIT Service Desk: A Model for Improving Productivity and Reducing Costs

Energy Technology Data Exchange (ETDEWEB)

Ashcraft, Phillip Lynn [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fogle, Blythe G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cummings, Susan M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lopez, Leon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-29

This was prepared for the business process improvement presentation to the Department of Energy. Los Alamos National Laboratory provides a single point of contact, the AskIT Service Desk, to address issues that impact customer productivity. At the most basic level, what customers want is for their calls to be received, to get a response from a knowledgeable analyst, and to have their issues resolved and their requests fulfilled. Providing a centralized, single point of contact service desk makes initiating technical or business support simple for the customer and improves the odds of immediately resolving the issue or correctly escalating the request to the next support level when necessary. Fulfilling customer requests through automated workflow also improves customer productivity and reduces costs. Finally, customers should be provided the option to solve their own problems through easy access to self-help resources such as frequently asked questions (FAQs) and how-to guides. To accomplish this, everyone who provides and supports services must understand how these processes and functions work together. Service providers and those who support services must “speak the same language” and share common objectives. The Associate Directorate for Business Innovation (ADBI) began the journey to improve services by selecting a known service delivery framework (Information Technology Infrastructure Library, or ITIL). From this framework, components that contribute significant business value were selected.

Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene

Science.gov (United States)

Geng, Xiumei; Guo, Yufen; Li, Dongfang; Li, Weiwei; Zhu, Chao; Wei, Xiangfei; Chen, Mingliang; Gao, Song; Qiu, Shengqiang; Gong, Youpin; Wu, Liqiong; Long, Mingsheng; Sun, Mengtao; Pan, Gebo; Liu, Liwei

2013-01-01

Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2 nm have been obtained by a mild and durative ICE. The high-quality graphene layers preserve intact basal crystal planes owing to avoidance of the degradation reaction during both intercalation and ICE. Furthermore, we reveal that the high-quality FLG ensures a remarkable lithium-storage stability (>1,000 cycles) and a large reversible specific capacity (>600 mAh g-1). This simple and scalable technique acquiring high-quality FLG offers considerable potential for future realistic applications.

Improving productivity levels: family planning services for factory workers.

Science.gov (United States)

Darmokusumo, H V

1989-10-01

In May 1984, the Minister of Manpower in Indonesia, the Chairman of the BKKBN, and representatives of the employers' and workers' organizations of Indonesia issued a joint decree pledging that they would work together to enhance the implementation of the family planning program among workers in the organized sector. 1 objective of the decree is to improve workers' productivity and the standard of living of workers and their families by implementing a family planning program. 1 baseline survey and a clinic-based survey in 5 provinces revealed that 90% of women workers are between 21-40, or are of reproductive age, and are sexually active. Only about 50% are practicing family planning; the other 50% are afraid to practice family planning due to potential side effects of various methods. This fear was most often caused by negative rumors spread by unsatisfied family planning clients. Placing materials for family planning promotion such as instructional posters and video programs advertising contraceptive services in the work setting may increase knowledge and help alleviate some of this fear. Other studies of family planning services show that employees prefer female medical doctors or midwives as service providers, employees are willing to pay for services (but can only afford a small fee), and family planning service points should be near employees' work sites.

On-Chip Production of Size-Controllable Liquid Metal Microdroplets Using Acoustic Waves.

Science.gov (United States)

Tang, Shi-Yang; Ayan, Bugra; Nama, Nitesh; Bian, Yusheng; Lata, James P; Guo, Xiasheng; Huang, Tony Jun

2016-07-01

Micro- to nanosized droplets of liquid metals, such as eutectic gallium indium (EGaIn) and Galinstan, have been used for developing a variety of applications in flexible electronics, sensors, catalysts, and drug delivery systems. Currently used methods for producing micro- to nanosized droplets of such liquid metals possess one or several drawbacks, including the lack in ability to control the size of the produced droplets, mass produce droplets, produce smaller droplet sizes, and miniaturize the system. Here, a novel method is introduced using acoustic wave-induced forces for on-chip production of EGaIn liquid-metal microdroplets with controllable size. The size distribution of liquid metal microdroplets is tuned by controlling the interfacial tension of the metal using either electrochemistry or electrocapillarity in the acoustic field. The developed platform is then used for heavy metal ion detection utilizing the produced liquid metal microdroplets as the working electrode. It is also demonstrated that a significant enhancement of the sensing performance is achieved by introducing acoustic streaming during the electrochemical experiments. The demonstrated technique can be used for developing liquid-metal-based systems for a wide range of applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

136 Determinant of Adoption Pattern of New Product/Services in ...

African Journals Online (AJOL)

First Lady

2013-01-28

Jan 28, 2013 ... the adoption pattern for effective product management in the hotel industry. Specifically the study .... strong impact on NSD performance were strategic human resource .... affect how he/she chooses new services. in the case of night clubs in. Molumber it ..... Marketing in Nigeria Concepts, Principles and.

Gender Differences in Access to Extension Services and Agricultural Productivity

Science.gov (United States)

Ragasa, Catherine; Berhane, Guush; Tadesse, Fanaye; Taffesse, Alemayehu Seyoum

2013-01-01

Purpose: This article contributes new empirical evidence and nuanced analysis on the gender difference in access to extension services and how this translates to observed differences in technology adoption and agricultural productivity. Approach: It looks at the case of Ethiopia, where substantial investments in the extension system have been…

Combining the export promotion of products and services: the case ...

African Journals Online (AJOL)

kirstam

2014-12-09

Dec 9, 2014 ... than tangible products in the aftermath of the global financial crisis of 2008/2009. ... rich country would rather supply services domestically than import them. ... Due to regulatory issues and other trade barriers encountered by ..... inspections; logistics performance; and ad valorem equivalent tariffs and non- ...

Forest Management for Non-Wood Forest Products and Services in ...

African Journals Online (AJOL)

The contribution of Non-Wood Forest Products (NWFPs) and services in livelihood support has been reviewed. Quite a number of NWFPs are also important articles of commerce and contribute significantly to the economies various African countries. The non-consumptive role of forests has been examined in terms of ...

Quality of gourmand products and services and modern trends in restaurant industry

Directory of Open Access Journals (Sweden)

Ćirić Nata

2014-01-01

Full Text Available Improving Hotel offers by introducing different contents and services (swimming pools, bars, conference rooms, specialized restaurants, diverse and attractive cuisine, with strategic and holistic approach to the hotel - tourist activities, can lead to increased tourist traffic and tourist spending. The modern touristic demand is very critical and sophisticated, particularly in the terms of content and new culinary trends. Religious customs, traditions and different ways of living, vegetarianism, organic food, healthy food, slow food etc., determine the specific consciousness of the choice of foods and nutrition for many tourists. The restaurants known for their fine gastronomy and service are in a stronger competitive position than restaurants that do not keep the continuity of high quality products and services. Creating a restaurant with an organic, macrobiotic or vegetarian food can be a significant form of marketing strategy aim to establish a superior quality catering industry products and achievement of competitive advantage in that respect.

Overview of the Copernicus Marine Environment Monitoring Service Products Available for the Arctic Region

Directory of Open Access Journals (Sweden)

A.L. Kholod

2017-04-01

Full Text Available The Copernicus Marine Environment Monitoring Service is one of six services (ocean, atmosphere, land, emergency situations, security and climate changes launched by the European Union within the EU Earth observation program. The data in the monitoring system covers both the entire World Ocean and individual European basins. The paper reviews the products of the Copernicus Marine Service operational system available in the Arctic. At the present time this region is of the increased interest both in Russia and in the world community. The system products include information on the thermodynamic, biogeochemical and bio-optical state of the marine environment. The system products are accessed through the electronic catalog of products. Selection criteria and possibilities for searching interesting information through the interactive web-portal are given in the paper. The system products containing the data of model calculations, satellite and in situ measurement results are considered. Spatial and temporal characteristics of the products are given, information on by whom, how the product was obtained and what is its accuracy is represented. The results of the system products visualization by the integrated tools (they allow one to construct and analyze time series, profiles, horizontal and vertical sections are shown. All the system data is publicly available to the registered users. Regular changes and updates of the system products as well as the mechanisms for accessing them take place. This information is sent to users by e-mail and is available on the news flash of the web-portal.

Danish energy-sector exports. Products and consulting services

International Nuclear Information System (INIS)

Wolter, H.C.

2000-06-01

Danish Energy Agency has previously carried out studies of Danish energy-sector exports. The latest results were published in the report, Energisektorens eksport. Produkter og raadgivning. Danish Energy Agency, September 1998. The present survey is an update of the earlier studies, and includes 1998 exports. As previously, the study, carried out in cooperation with the Confederation of Danish Industries and the Danish Council of Consulting Architects and Engineers, is based on questionnaires sent to relevant companies. In addition, information has been obtained from companies that do not belong to these organisations. On the basis of the answers received, 58 Danish companies exported products to a value of approximately DKK 16,000 million, and 22 consulting firms exported consulting services to a value of approximately DKK 370 million. These exports of approximately DKK 16.5 billion accounted for 5% of all Danish exports in 1998. In comparison with 1996, energy-sector exports have risen by more than 40% in a period in which Danish exports in general have risen by an average of 8%. Energy sector exports provide employment for more than 18,000 persons in Denmark - approximately 17,500 employees in companies that export products, and approximately 600 persons in consulting firms. To this must be added a presumably significantly larger number of persons employed by sub-suppliers to the above companies computed by value, 80% of the exports come from relatively few companies, i.e. 13 companies with products, and five offering consulting services. Energy-sector exports fall within the following product areas: 1) Wind turbines (25%). 2) District heating and combined heat and power (CHP) (21%). 3) Energy savings and control (20%). 4) Oil and natural gas (13%). 5) Electricity plants and power supply (13%). 6) Other (8%). 67% of the exports go to Western Europe, 18% to Asia, 7% to Eastern and Central Europe, and 8% to other parts of the world. (EHS)

Forming of the dynamics of the changes in convergent production system depending on size of production party

Directory of Open Access Journals (Sweden)

Bożena Zwolińska

2017-09-01

Full Text Available Background: In terms of Lean Six Sigma, the whole process focuses on clients and their needs. Existence of a client generates the supply of companies. Extended customization has a negative impact for a structure of the production system. Dynamics of changes and no predictability of system’s state in time t+1 lead to increase of the operational costs. It particularly affects those companies which are producing goods using MTO (make – to – order method in short series. The goal of this article is to establish a mathematical model defining how the structure of a production system is subject to change depending on the volume of the production batch for a production system in accordance with MTO. Furthermore pilot calculations have been presented which determine the probability value, how subsequent random variables are contained within three standard deviations (±3δ from the determined expected value (ET for the entire production structure. Months of analysis and research on introducing selected lean toolbox components to a polish company from the small and medium enterprises sector resulted in the models presented in the article. The production structure of the discussed actual facility is complex and is of converged nature in accordance with MTO, while the final products are manufactured in short production series with a relatively wide customization options. Materials and results: Wrought models consider theories of  Klir and Maserovicz [Mesarovic 1964] and also theory of mass operation (one of the probability areas.  In the article there are results from two models which are fundamental in defining problems in logistics engineering and production in scientific research. Important attribute of presented models is a fact that they consider relations between variables in a structure of consecutive processes and also consider relations between a size of production party and a real object. Presented models are not only theoretical coverage

Retail Productivity: Investigating the Influence of Market Size and Regional Hierarchy

OpenAIRE

Öner, Özge

2014-01-01

This paper investigates the determinants of the productivity of independent retail stores in Sweden by focusing on the impact of market size and regional hierarchy while controlling for several store and employee characteristics over time. The analysis utilizes Swedish store-level data for the years 2002–2008. To capture the urban-periphery interaction in retail markets, the analysis (i) uses an accessible market potential measure, which captures the impact of the potential demand both in clo...

Contract for service to produce 50 tonnes sterifeed - lesson learned from semi-commercial scale test production

International Nuclear Information System (INIS)

Hassan Hamdani Mutaat; Mat Rasol Awang; Zainon Said; Irwan Md Arif; Alias K Sadeli

2005-01-01

A contract for service has been awarded to a local company to produce 50 tonnes Sterifeed in a period of 4 months commencing 3 September 2001. The production was for supplying enough feed for the testing of Sterifeed on cattle. Appointed contractor was required to manage the production, supply labours and provide transport for the full production operation of the plant. The production performance is discussed based on: the labour cost; supervision and control; and skill and training. This report discusses and evaluate the suitability of service for contract for the future commercial scale production. (Author)

Efficient Provision of Employment Service Outputs: A Production Frontier Analysis.

Science.gov (United States)

Cavin, Edward S.; Stafford, Frank P.

1985-01-01

This article develops a production frontier model for the Employment Service and assesses the relative efficiency of the 51 State Employment Security Agencies in attaining program outcomes close to that frontier. This approach stands in contrast to such established practices as comparing programs to their own previous performance. (Author/CT)

VTLS Inc.: The Company, the Products, the Services, the Vision.

Science.gov (United States)

Chachra, Vinod; And Others

1993-01-01

Describes the range of products and services offered by VTLS, a company that offers comprehensive, integrated library automation software and customer support. VTLS's growth and development in the United States and abroad is described, and nine sidebar articles detail system features and applications in public, academic, and virtual libraries. (20…

'Demand pull' government policies to support Product-Service System activity: The case of Energy Service Companies in the UK

OpenAIRE

Hannon, MJ; Foxon, TJ; Gale, WF

2015-01-01

Product-Service Systems (PSSs) constitute a family of service-based business models designed to satisfy our societal needs in an economically and environmentally sustainable manner. To date however PSS application has remained niche due to a variety of critical barriers. This paper explores how ‘demand pull’ national government policies could support PSS activity by addressing these barriers and cultivating market demand. Lessons are drawn from a case study of how regulatory, economic incenti...

Association Between Employee Dental Claims, Health Risks, Workplace Productivity, and Preventive Services Compliance.

Science.gov (United States)

Burton, Wayne N; Chen, Chin-Yu; Li, Xingquan; Schultz, Alyssa B

2017-08-01

This study examined differences in health risks and workplace outcomes among employees who utilized preventive dental services compared with other employees. A retrospective observational study of employees of a large financial services corporation, with data from health risk appraisal questionnaires, medical claims, pharmacy claims, and dental claims. Employees with no dental claims were significantly more likely to have a variety of health risk factors (such as obesity and tobacco use), health conditions (such as diabetes), absenteeism, and lost on-the-job productivity, and were significantly less likely to be compliant with clinical preventive services compared with those with preventive dental claims. Employees with preventive dental claims had fewer health risks and medical conditions and better health and productivity measures. Study employees underutilized free dental care; employers should incorporate preventive dental care awareness into their worksite wellness programs.

Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

Directory of Open Access Journals (Sweden)

Diogo Brito de Almeida

2017-08-01

Full Text Available Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm, subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season, the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in

Stability measures for rolling schedules with applications to capacity expansion planning, master production scheduling, and lot sizing

OpenAIRE

Kimms, Alf

1996-01-01

This contribution discusses the measurement of (in-)stability of finite horizon production planning when done on a rolling horizon basis. As examples we review strategic capacity expansion planning, tactical master production schedulng, and operational capacitated lot sizing.

Do Digital Systems and Concept in Modern Public Service Production Have a Negative Impact on Citizens as End-Users?

DEFF Research Database (Denmark)

Pedersen, John Storm; Rendtorff, Jacob Dahl

2016-01-01

Do digital systems and concepts in modern public service production have a negative impact on citizens as end-users? To answer this research question, we shall first present our theoretical framework ‘the institutional logics perspective’ and show how we deploy this on modern public service...... production. Second, we claim that digital systems and concepts develop a new institutional logic within modern public service production: the ‘digital logic’. Third, we analyze and discuss the new logic´s possible impact on citizens as end-users. Fourth, we discuss the ethical dimensions of values and ethics...... in relation to public service production and digitizing....

Differences in productive robustness in rabbits selected for reproductive longevity or litter size

DEFF Research Database (Denmark)

Theilgaard, R; Baselga, M; Blas, E

2009-01-01

The aim of this work was to evaluate the ability of a line selected for reproductive longevity (LP) to confront productive challenges compared to a line selected during 31 generations for litter size at weaning (V). A total of 133 reproductive rabbit does were used (72 and 61 from LP and V lines,...

Energy Efficiency Services Sector: Workforce Size and Expectations for Growth

Energy Technology Data Exchange (ETDEWEB)

Goldman, Charles; Fuller, Merrian C.; Stuart, Elizabeth; Peters, Jane S.; McRae, Marjorie; Albers, Nathaniel; Lutzenhiser, Susan; Spahic, Mersiha

2010-03-22

The energy efficiency services sector (EESS) is poised to become an increasingly important part of the U.S. economy. Climate change and energy supply concerns, volatile and increasing energy prices, and a desire for greater energy independence have led many state and national leaders to support an increasingly prominent role for energy efficiency in U.S. energy policy. The national economic recession has also helped to boost the visibility of energy efficiency, as part of a strategy to support economic recovery. We expect investment in energy efficiency to increase dramatically both in the near-term and through 2020 and beyond. This increase will come both from public support, such as the American Recovery and Reinvestment Act (ARRA) and significant increases in utility ratepayer funds directed toward efficiency, and also from increased private spending due to codes and standards, increasing energy prices, and voluntary standards for industry. Given the growing attention on energy efficiency, there is a concern among policy makers, program administrators, and others that there is an insufficiently trained workforce in place to meet the energy efficiency goals being put in place by local, state, and federal policy. To understand the likelihood of a potential workforce gap and appropriate response strategies, one needs to understand the size, composition, and potential for growth of the EESS. We use a bottom-up approach based upon almost 300 interviews with program administrators, education and training providers, and a variety of EESS employers and trade associations; communications with over 50 sector experts; as well as an extensive literature review. We attempt to provide insight into key aspects of the EESS by describing the current job composition, the current workforce size, our projections for sector growth through 2020, and key issues that may limit this growth.

Ancillary services and optimal household energy management with photovoltaic production

International Nuclear Information System (INIS)

Clastres, C.; Ha Pham, T.T.; Wurtz, F.; Bacha, S.

2010-01-01

This article presents a project designed to increase the monetary value of photovoltaic (PV) solar production for residential applications. To contribute to developing new functionalities for this type of PV system and an efficient control system for optimising its operation, this article explains how the proposed system could contract to provide ancillary services, particularly the supply of active power services. This provision of service by a PV-based system for domestic applications, not currently available, has prompted a market design proposal related to the distribution system. The mathematical model for calculating the system's optimal operation (sources, load and exchanges of power with the grid) results in a linear mix integer optimisation problem in which the objective is to maximise the profits achieved by taking part in the electricity market. Our approach is illustrated in a case study. PV producers could gain by taking part in the markets for balancing power or ancillary services despite the negative impact on profit of several types of uncertainty, notably the intermittent nature of the PV source.

Managing Bioenergy Production on Arable Field Margins for Multiple Ecosystem Services: Challenges and Opportunities

Science.gov (United States)

Ferrarini, Andrea; Serra, Paolo; Amaducci, Stefano; Trevisan, Marco; Puglisi, Edoardo

2013-04-01

Growing crops for bioenergy is increasingly viewed as conflicting with food production. However, energy use continues to rise and food production requires fuel inputs, which have increased with intensification. The debate should shift from "food or fuel" to the more challenging target: how the increasing demand for food and energy can be met in the future, particularly when water and land availability will be limited. As for food crops, also for bioenergy crops it is questioned whether it is preferable to manage cultivation to enhance ecosystem services ("land sharing" strategy) or to grow crops with lower ecosystem services but higher yield, thereby requiring less land to meet bioenergy demand ("land sparing" strategy). Energy crop production systems differ greatly in the supply of ecosystem services. The use of perennial biomass (e.g. Switchgrass, Mischantus, Giant reed) for energy production is considered a promising way to reduce net carbon emissions and mitigate climate change. In addition, regulating and supporting ecosystem services could be provided when specific management of bioenergy crops is implemented. The idea of HEDGE-BIOMASS* project is to convert the arable field margins to bioenergy crop production fostering a win-win strategy at landscape level. Main objective of the project is to improve land management to generate environmental benefits and increase farmer income. The various options available in literature for an improved field boundary management are presented. The positive/unknown/negative effects of growing perennial bioenergy crops on field margins will be discussed relatively to the following soil-related ecosystem services: (I) biodiversity conservation and enhancement, (II) soil nutrient cycling, (III) climate regulation (reduction of GHG emissions and soil carbon sequestration/stabilization, (IV) water regulation (filtering and buffering), (V) erosion regulation, (VI) pollination and pest regulation. From the analysis of available

Closed-Loop Lifecycle Management of Service and Product in the Internet of Things: Semantic Framework for Knowledge Integration.

Science.gov (United States)

Yoo, Min-Jung; Grozel, Clément; Kiritsis, Dimitris

2016-07-08

This paper describes our conceptual framework of closed-loop lifecycle information sharing for product-service in the Internet of Things (IoT). The framework is based on the ontology model of product-service and a type of IoT message standard, Open Messaging Interface (O-MI) and Open Data Format (O-DF), which ensures data communication. (1) BACKGROUND: Based on an existing product lifecycle management (PLM) methodology, we enhanced the ontology model for the purpose of integrating efficiently the product-service ontology model that was newly developed; (2) METHODS: The IoT message transfer layer is vertically integrated into a semantic knowledge framework inside which a Semantic Info-Node Agent (SINA) uses the message format as a common protocol of product-service lifecycle data transfer; (3) RESULTS: The product-service ontology model facilitates information retrieval and knowledge extraction during the product lifecycle, while making more information available for the sake of service business creation. The vertical integration of IoT message transfer, encompassing all semantic layers, helps achieve a more flexible and modular approach to knowledge sharing in an IoT environment; (4) Contribution: A semantic data annotation applied to IoT can contribute to enhancing collected data types, which entails a richer knowledge extraction. The ontology-based PLM model enables as well the horizontal integration of heterogeneous PLM data while breaking traditional vertical information silos; (5) CONCLUSION: The framework was applied to a fictive case study with an electric car service for the purpose of demonstration. For the purpose of demonstrating the feasibility of the approach, the semantic model is implemented in Sesame APIs, which play the role of an Internet-connected Resource Description Framework (RDF) database.

The Service for the Customers of Coal Products in the Context of the Conception of Relationship Marketing

Directory of Open Access Journals (Sweden)

Trushkina Nataliia V.

2017-04-01

Full Text Available The article is aimed at developing approaches to the service for various groups of customers of coal products in the context of the conception of relationship marketing. Content of the term of «service of the customers of coal products» has been clarified. An analysis of the dynamics of volume and structure of coal consumption in Ukraine was carried out. It has been proven that in organizing the marketing processes in terms of coal enterprise activities, it is appropriate to apply the conception of relationship marketing, essence of which is formation of a partnership based on a customer-oriented approach to the service for customers of coal products. A feature of this approach, unlike the existing ones, is the allocation of different groups of consumers of coal products, taking into consideration the volume of their annual demand and the specifics identified. It has been suggested that a systemic, process, and functional approaches to the organization of processes of service for the consumers of coal products be used in a single complex through the implementation of management functions.

How forest management affects ecosystem services, including timber production and economic return

DEFF Research Database (Denmark)

Duncker, Philipp S.; Raulund-Rasmussen, Karsten; Gundersen, Per

2012-01-01

and services. By use of virtual but realistic datasets, we quantified, for multiple services, the effects of five forest management alternatives that form an intensity gradient. Our virtual forest management units represented Central European forest ecosystems in the submontane vegetation zone under a humid......–temperate climate with acidic soils. In this zone the European beech (Fagus sylvatica L.) is the dominant tree species. In order to assess the effects on ecosystem services, the untouched natural forest reserve served as a reference. Wherever possible, response functions were deduced to couple the various services...... via stand-level data to demonstrate trade-offs between the services. Management units comprised all development phases in the sense of a "normal forest". It was clearly illustrated that maximizing the rates of biomass production and carbon sequestration may conflict with protection of authentic...

AREVA NP products and services for NPP operation and maintenance improvement

International Nuclear Information System (INIS)

Dechelette, Anne; Rat, Guy Le

2009-01-01

AREVA supplies customized services throughout the reactor improvement process according to clients' requirements: safety, performance, availability, obsolescence, operating and maintenance conditions, environment and technical assistance. Form design studies to on site modification and implementation including requalification tests, AREVA, as OEM*, has various products and services in the field of Engineering and Upgrading to satisfy client demands. In keeping with Inpo's AP913 approach, AREVA is particularly skilled in this methodology to help utilities improve availability factor and maintenance programs. AREVA has customized its services to many utilities in cooperating with local partners, suppliers, and engineering service providers through partnerships, consortiums, joint ventures, etc. AREVA's knowledge of the fleet's operation and maintenance experience helps NPP clients to identify the most cost effective improvements and approaches. Different examples of modifications of modifications and improvements performed in France and abroad illustrate AREVA's involvement in the NPP continuous upgrade process

Fostering creativity in product and service development: validation in the domain of information technology.

Science.gov (United States)

Zeng, Liang; Proctor, Robert W; Salvendy, Gavriel

2011-06-01

This research is intended to empirically validate a general model of creative product and service development proposed in the literature. A current research gap inspired construction of a conceptual model to capture fundamental phases and pertinent facilitating metacognitive strategies in the creative design process. The model also depicts the mechanism by which design creativity affects consumer behavior. The validity and assets of this model have not yet been investigated. Four laboratory studies were conducted to demonstrate the value of the proposed cognitive phases and associated metacognitive strategies in the conceptual model. Realistic product and service design problems were used in creativity assessment to ensure ecological validity. Design creativity was enhanced by explicit problem analysis, whereby one formulates problems from different perspectives and at different levels of abstraction. Remote association in conceptual combination spawned more design creativity than did near association. Abstraction led to greater creativity in conducting conceptual expansion than did specificity, which induced mental fixation. Domain-specific knowledge and experience enhanced design creativity, indicating that design can be of a domain-specific nature. Design creativity added integrated value to products and services and positively influenced customer behavior. The validity and value of the proposed conceptual model is supported by empirical findings. The conceptual model of creative design could underpin future theory development. Propositions advanced in this article should provide insights and approaches to facilitate organizations pursuing product and service creativity to gain competitive advantage.

Evaluating the Effects of Co-Production Initiatives in Public Service Organizations

DEFF Research Database (Denmark)

Brix, Jacob; Krogstrup, Hanne Kathrine; Mortensen, Nanna Møller

2017-01-01

A change from New Public Management to New Public Governance (NPG) does not occur overnight. This forces public service organizations to develop new hybrid organizational forms as strategic response to the current situation. In NPG the basic assumption is that coproduction will result in increased...... efficiency and effectiveness for public service organizations as a new organizational recipe. However, a recent review determines that only few empirical studies document these claimed effects. To enable the creation of more empirical evidence that establish the effects of co-production, the purpose of our...

Energy saving cement production by grain size optimisation of the raw meal

Directory of Open Access Journals (Sweden)

B. Simons

Full Text Available The production of cement clinker is an energy consuming process. At about 50% of the energy is associated with grinding and milling of the raw meal, that normally is in the range 100% <200 μm with 90% <90 μm. Question: is it possible to use coarser components of the raw meal without reducing the clinker quality. With synthetic raw meals of various grain sizes the clinker formation was studied at static (1100 - 1450°C and dynamic conditions (heating microscope. A routine to adjust the grain size of the components for industrial raw meals is developed. The fine fraction <90 μm should mainly contain the siliceous and argileous components, whereas the calcitic component can be milled separately to a grain size between 200-500 μm, resulting in lower energy consumption for milling. Considering the technical and economical realizability the relation fine/coarse should be roughly 1:1. The energy for milling can be reduced significantly, that in addition leads to the preservation of natural energy resources.

Data records of biophysical products in the Copernicus Global Land Service

Science.gov (United States)

Bydekerke, L.; Smets, B.; Swinnen, E.; Lacaze, R. N.; Calvet, J. C.; Baret, F.; camacho De Coca, F.; Roujean, J. L.; Tansey, K.; Coelho, S.; Jann, A.; Paulik, C.; Verger, A.

2014-12-01

From 1stJanuary 2013, the Copernicus Global Land service provides continuously a set of bio-geophysical variables describing, over the whole globe, the vegetation dynamic, the energy budget at the continental surface and some components of the water cycle. These generic products serve numerous applications such as agriculture and food security monitoring, weather forecast, climate change impact studies, water, forest and natural resources management. The portfolio contains Essential Climate Variables like Leaf Area Index (LAI), the Fraction of PAR absorbed by the vegetation (FAPAR), surface albedo, Land Surface Temperature, soil moisture, burnt areas, areas of water bodies, and additional vegetation indices. They are generated daily on a reliable and automatic basis from Earth Observation satellite data. Beside this timely production, the available historical archives, up to 16 years for SPOT-VEGETATION, have been processed using the same innovative algorithms. For a number of ECVs, the algorithms are adapted to work with NOAA-AVHRR as input to extend the time series up to 1982. The service continuity is provided in two parallel paths. On one hand, the existing retrieval methodologies are adapted to use the new PROBA-V sensor, fully consistent with SPOT-VEGETATION, and as such extends the time-series at 1km spatial resolution. On the other hand, the operation is moving to the finer resolution of PROBA-V (300m), while maintaining consistency with the 1km series. The data records are documented in terms of the physical methodologies, the technical properties, and the results of validation exercises. The service performs a continuous quality monitoring on three levels: technical, scientific and cross-cutting, following where possible the rules of CEOS/LPV and comparing with both in-situ and other datasets, e.g. MODIS. The service is improved through feedback from an independent expert team performing regular independent reviews and providing user feedback. All

7 CFR 51.344 - Size.

Science.gov (United States)

2010-01-01

... the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range...

Switchboard simulation to improve productivity and customer service.

Science.gov (United States)

LaCourse, E D

1996-01-01

An application of classical industrial engineering/operations research techniques (i.e., multichannel queueing analysis) and detailed workload distribution data. An analytic simulation model developed on a personal computer (PC) is used with interactive analysis to develop switchboard coverage requirements and optimal staffing schedules by time of day and day of week. This represents a tangible example of how classical techniques can be used with newer approaches and a close working relationship between the analyst and line management, to solve a practical problem of optimizing both productivity and customer service quality.

Co-production of healthcare services with immigrant patients

DEFF Research Database (Denmark)

Radl-Karimi, Christina Mathilde; Nicolaisen, Anne; Sodemann, Morten

2018-01-01

’s methodology for scoping reviews. The data will stem from the following databases: PubMed, Scopus, Ovid EMBASE, EBSCO CINAHL, EBSCO PsycINFO, Cochrane Library, and Web of Science. We will also screen the websites of national authorities and research organisations for publications and review the literature...... a new perspective on how to collaboratively create the highest possible value for both the patient and the healthcare system. The concept acknowledges that all services are co-produced and directs attention to the relationship between patient and care provider. Co-production is still a new concept...

Elements of product service systems as a potential to achieve a sustainable development: bibliometry and content analysis

Directory of Open Access Journals (Sweden)

Rafael Ariente Neto

2014-08-01

Full Text Available The concept of product-service systems (PSS is presented as an innovative strategy when offering products and services. It aims at for minimizing environmental impacts through sustainable business models. This study aims to identify which potentialities can be explored with regard to the elements of a PSS in a configuration that favor to offer answers on sustainable issues. To do so, the literature was analyzed by a structured process of bibliographic review. Among the results, three aspects are highlighted: (i the wideness of product concept to add services through PSS life-cycle, (ii the configuration of infra-structure to support a PSS by establishing the necessary communication relatively to logistics services. Finally, the net of actors should be explored to obtain organizational proposals that contribute to PSS performance.

Isotope materials availability and services for target production at the Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Ratledge, J.E.; Dahl, T.L.; Ottinger, C.L.; Aaron, W.S.; Adair, H.L.

1987-01-01

Materials available through the Isotope Distribution Program include separated stable isotopes, byproduct radioisotopes, and research quantities of source and special nuclear materials. Isotope products are routinely available in the forms listed in the product description section of the Isotopes Products and Services Catalog distributed by the Oak Ridge National Laboratory (ORNL). Different forms can be provided in some cases, usually at additional cost. Routinely available services include cyclotron target irradiations, fabrication of special physical forms, source encapsulation, ion implantation, and special purifications. Materials and services that are not offered as part of the routine distribution program may be made available from commercial sources in the United States. Specific forms of isotopic research materials include thin films and foils for use as accelerator targets, metal or other compounds in the form of bars or wires, and metal foils. Methods of fabrication include evaporation, sputtering, rolling, electrolytic deposition, pressing, sintering, and casting. High-purity metal forms of plutonium, americium, and curium are prepared by vacuum reduction/distillation. Both fissionable and nonfissionable neutron dosimeters are prepared for determining the neutron energy spectra, flux, and fluence at various locations within a reactor. Details on what materials are available and how the materials and related services can be obtained from ORNL are described. (orig.)

Sustainable Product Service Systems in Small and Medium Enterprises (SMEs: Opportunities in the Leather Manufacturing Industry

Directory of Open Access Journals (Sweden)

Ricardo J. Hernández Pardo

2012-01-01

Full Text Available This paper presents an approach to identify opportunities to develop sustainable Product Service Systems (PSS involving Small and Medium Enterprises (SMEs. The purpose of the research is to build understanding of how the integration of product and service design and the use of Information and Communication Technologies (ICT can contribute to identify opportunities to develop sustainable PSS involving SMEs. In order to develop the approach, research with 16 Colombian Manufacturing SMEs was carried out. A reference model and four generic types of PSS according to the relationships between product and service design and ICT are used to analyse the data. Finally, the possibility of extending the approach into a general framework to work with other industries is discussed.

Closed-Loop Lifecycle Management of Service and Product in the Internet of Things: Semantic Framework for Knowledge Integration

Directory of Open Access Journals (Sweden)

Min-Jung Yoo

2016-07-01

Full Text Available This paper describes our conceptual framework of closed-loop lifecycle information sharing for product-service in the Internet of Things (IoT. The framework is based on the ontology model of product-service and a type of IoT message standard, Open Messaging Interface (O-MI and Open Data Format (O-DF, which ensures data communication. (1 Background: Based on an existing product lifecycle management (PLM methodology, we enhanced the ontology model for the purpose of integrating efficiently the product-service ontology model that was newly developed; (2 Methods: The IoT message transfer layer is vertically integrated into a semantic knowledge framework inside which a Semantic Info-Node Agent (SINA uses the message format as a common protocol of product-service lifecycle data transfer; (3 Results: The product-service ontology model facilitates information retrieval and knowledge extraction during the product lifecycle, while making more information available for the sake of service business creation. The vertical integration of IoT message transfer, encompassing all semantic layers, helps achieve a more flexible and modular approach to knowledge sharing in an IoT environment; (4 Contribution: A semantic data annotation applied to IoT can contribute to enhancing collected data types, which entails a richer knowledge extraction. The ontology-based PLM model enables as well the horizontal integration of heterogeneous PLM data while breaking traditional vertical information silos; (5 Conclusion: The framework was applied to a fictive case study with an electric car service for the purpose of demonstration. For the purpose of demonstrating the feasibility of the approach, the semantic model is implemented in Sesame APIs, which play the role of an Internet-connected Resource Description Framework (RDF database.

Closed-Loop Lifecycle Management of Service and Product in the Internet of Things: Semantic Framework for Knowledge Integration

Science.gov (United States)

Yoo, Min-Jung; Grozel, Clément; Kiritsis, Dimitris

2016-01-01

This paper describes our conceptual framework of closed-loop lifecycle information sharing for product-service in the Internet of Things (IoT). The framework is based on the ontology model of product-service and a type of IoT message standard, Open Messaging Interface (O-MI) and Open Data Format (O-DF), which ensures data communication. (1) Background: Based on an existing product lifecycle management (PLM) methodology, we enhanced the ontology model for the purpose of integrating efficiently the product-service ontology model that was newly developed; (2) Methods: The IoT message transfer layer is vertically integrated into a semantic knowledge framework inside which a Semantic Info-Node Agent (SINA) uses the message format as a common protocol of product-service lifecycle data transfer; (3) Results: The product-service ontology model facilitates information retrieval and knowledge extraction during the product lifecycle, while making more information available for the sake of service business creation. The vertical integration of IoT message transfer, encompassing all semantic layers, helps achieve a more flexible and modular approach to knowledge sharing in an IoT environment; (4) Contribution: A semantic data annotation applied to IoT can contribute to enhancing collected data types, which entails a richer knowledge extraction. The ontology-based PLM model enables as well the horizontal integration of heterogeneous PLM data while breaking traditional vertical information silos; (5) Conclusion: The framework was applied to a fictive case study with an electric car service for the purpose of demonstration. For the purpose of demonstrating the feasibility of the approach, the semantic model is implemented in Sesame APIs, which play the role of an Internet-connected Resource Description Framework (RDF) database. PMID:27399717

Co-production of the Service Recovery

DEFF Research Database (Denmark)

Sørensen, Jannick Kirk

2015-01-01

In this paper we apply Dourish’ (2001) conceptual framework of embodied interaction on a ICT-centric service encounter, namely the use of the online self-service system for reporting of tax and tax reduction claims offered by the Danish tax authority. An expected short and straight-forward servic...... and the service recovery process, thereby informing the innovation and design of ICT-centric service encounters.......In this paper we apply Dourish’ (2001) conceptual framework of embodied interaction on a ICT-centric service encounter, namely the use of the online self-service system for reporting of tax and tax reduction claims offered by the Danish tax authority. An expected short and straight-forward service...... encounter developed in this case into to a two weeks long service journey involving several human and computer actors as the reason for the service failure (represented by a blank pop-up window instead of the expected online form) could not be found. The case, which is seen as paradigmatic is used to test...

A qualitative study of the challenges related to the development of product enabled services in technology driven start-ups

OpenAIRE

Pedersen, Søren; Tanev, Stoyan; Ma, Zheng; Lin, Chih-Cheng

2012-01-01

Product-enabled service development has been identified as one of the potential sources for sustainable growth and competitiveness of firms in advanced economies. Many firms are in the process of shifting their focus from offering standalone products or services towards integrated offerings of products and services to meet specific customer demands, thus generating additional value. This paper examines technology-based start-ups’ attitude towards the development of hybrid offerings as part of...

Reflections on product/service-system (PSS) conceptualisation in a course setting

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Lauridsen, Erik Hagelskjær

2009-01-01

Product/service-system (PSS) approaches have over the past decade received considerable attention as possible sustainable innovation strategies. This paper presents and reflects upon the background, rationale and experiences behind a PSS design methodology applied with engineering students...... in a project course for the past five years. The methodology proposes four complementary dimensions of PSS: value proposition, product life cycle, activity modelling cycle and actor network, that all seem to comprehensively describe the essential conceptual design perspectives. Each of these dimensions...

Empowering the end-user in smart grids: Recommendations for the design of products and services

International Nuclear Information System (INIS)

Geelen, Daphne; Reinders, Angèle; Keyson, David

2013-01-01

In discussions on smart grids, it is often stated that residential end-users will play a more active role in the management of electric power supply and demand. They are expected to shift from a passive role as consumer of electricity to an active role as co-provider. In this article, the extent to which current technologies, products and services empower end-users to take up an active role as co-providers is evaluated. Based on a review of literature and related pilot projects, current approaches were found to be driven by technical and financial considerations. There appears to be a lack of product and service design that supports end-users in their role as co-providers in a smart grid. This is reflected in the lack of thought given to how the end-users’ process of behavioral change can be supported to enable the transition from consumer to co-provider. Several recommendations are provided for product and service designers towards fostering the role of co-provider, which comes under under: (a) user interaction needs, (b) approaches to behavioral change and (c) community initiatives and management of resources. Designers are considered to play a bridging role between policy making and engineering, while facilitating involvement of end-users in the design process. - Highlights: • Overview of products and services for residential end-users in smart grids. • Evaluation of extent to which end-users are empowered to adopt a co-provider role. • Products and services often focus on technical functionality and financial incentives. • Behavioral aspects and social context would have to be taken into account more. • Design recommendations are proposed to empower end-users in becoming co-providers

Commercial products and services of research reactors. Proceedings of a technical meeting

International Nuclear Information System (INIS)

2013-07-01

Although the number of operational research reactors is steadily decreasing, more than half of those that remain are greatly underutilized and, in most cases, underfunded. To continue to play a key role in the development of peaceful uses of nuclear technology, the remaining research reactors will need to provide useful products and services to private, national and regional customers, in some cases with adequate revenue generation for reliable, safe and secure facility management and operation. In the light of declining governmental financial support and the need for improved physical security and conversion to low enriched uranium (LEU) fuel, many research reactors have been challenged to generate income to offset increasing operational and maintenance costs. The renewed interest in nuclear power (and therefore in nuclear education and training), the global expansion of diagnostic and therapeutic nuclear medicine, and the extensive use of semiconductors in electronics and in other areas have created new opportunities for research reactors, prominent among them, markets for products and services in regions and countries without such facilities. It is clear that such initiatives towards greater self-reliance will need to address such aspects as market surveys, marketing and business plans, and cost of delivery services. It will also be important to better inform present and future potential end users of research reactor services of the capabilities and products that can be provided. This publication is a compilation of material from an IAEA technical meeting on “Commercial Products and Services of Research Reactors”, held in Vienna, Austria, from 28 June to 2 July 2010. The overall objective of the meeting was to exchange information on good practices and to provide concrete examples, in technical presentations and brainstorming discussions, to promote and facilitate the development of commercial applications of research reactors. The meeting also aimed to

EXPLAINING CORPORATE STRUCTURE:THE MD MATRIX, PRODUCT DIFFERENTIATION AND SIZE OF MARKET

OpenAIRE

Alessandro Sembenelli; Laura Rondi; Stephen W. Davies

1995-01-01

Conventional explanations of diversification and multinationality both point to the existence of intangible assets as a driving force. Using a new database of leading EU firms in 100 NACE 3-digit industries, we devise a classificatory scheme which allows us to analyze multinationality and diversification jointly. We find that product differentiation and home market primary industry size constraints impact differently on different types of diversified firms. For instance, it appears that the c...

Product/Service-Systems: Proposal for models and terminology

DEFF Research Database (Denmark)

Matzen, Detlef; Tan, Adrian; Andreasen, Mogens Myrup

2005-01-01

very blurred and ill defined. This paper will try to identify the fundamental characteristics of PSS and propose a system of concepts that can be used to describe and discuss the phenomenon, for the purpose of developing new PSS solutions. Coming from a tradition of product development research......Over recent years a growing number of studies and research programmes have been conducted on the issue of product/service-systems (PSS) [1, 2] and results have been presented at this row of symposia [3, 4]. These studies usually analyse the potential of integrated solutions to reduce...... the environmental impacts of human consumption activity or optimise a company’s ability to cope with the influences arising from the emerging globalisation of economic and business activities. Since there has not been worked on a coherent terminology for the terms and concepts used in PSS research, the area remains...

Assessing the antecedents of customer loyalty on healthcare insurance products: Service quality; perceived value embedded model

Directory of Open Access Journals (Sweden)

Fadi Abdelmuniem Abdelfattah

2015-11-01

Full Text Available Purpose: This research aim to investigate the influence of service quality attributes towards customers’ loyalty on health insurance products. In addition, this research also tested the mediation role of perceived value in between service quality and customers’ loyalty on health insurance products. Design/methodology/approach: Based on the literature review, this research developed a conceptual model of customers loyalty embedded with service quality and perceived value. The study surveyed 342 healthcare insurance customers. Apart from assessing the reliability and validity of the constructs through confirmatory factor analysis, this research also used structural equation modelling (SEM approach to test the proposed hypothesis. Findings: The results from the inferential statistics revealed that the healthcare insurance customers are highly influenced by service quality followed by the perceived value in reaching their loyalty towards a particular health insurance service provider. Research limitations/implications: The sample for this study is based on health insurance customers only and it is suggested that future studies enlarge the scope to include others type of customers of different insurance products. Practical implications: In order to encourage the customers to more loyal towards their service providers, this research will add value for the mangers to understand the items of service quality and considering the perceived value of the target customers in order to optimize their loyalty. As whole, the outcome of this research will assist managers for better understanding of the customers’ loyalty antecedents under the perspective of healthcare insurance products. Originality/value: This paper has tried to provide a comprehensive understanding about customers’ loyalty under the perspective of service quality and perceived values context in the Malaysian health care insurance industry. Since there was a lack of such research in

CERN database services for the LHC computing grid

International Nuclear Information System (INIS)

Girone, M

2008-01-01

Physics meta-data stored in relational databases play a crucial role in the Large Hadron Collider (LHC) experiments and also in the operation of the Worldwide LHC Computing Grid (WLCG) services. A large proportion of non-event data such as detector conditions, calibration, geometry and production bookkeeping relies heavily on databases. Also, the core Grid services that catalogue and distribute LHC data cannot operate without a reliable database infrastructure at CERN and elsewhere. The Physics Services and Support group at CERN provides database services for the physics community. With an installed base of several TB-sized database clusters, the service is designed to accommodate growth for data processing generated by the LHC experiments and LCG services. During the last year, the physics database services went through a major preparation phase for LHC start-up and are now fully based on Oracle clusters on Intel/Linux. Over 100 database server nodes are deployed today in some 15 clusters serving almost 2 million database sessions per week. This paper will detail the architecture currently deployed in production and the results achieved in the areas of high availability, consolidation and scalability. Service evolution plans for the LHC start-up will also be discussed

CERN database services for the LHC computing grid

Energy Technology Data Exchange (ETDEWEB)

Girone, M [CERN IT Department, CH-1211 Geneva 23 (Switzerland)], E-mail: maria.girone@cern.ch

2008-07-15

Physics meta-data stored in relational databases play a crucial role in the Large Hadron Collider (LHC) experiments and also in the operation of the Worldwide LHC Computing Grid (WLCG) services. A large proportion of non-event data such as detector conditions, calibration, geometry and production bookkeeping relies heavily on databases. Also, the core Grid services that catalogue and distribute LHC data cannot operate without a reliable database infrastructure at CERN and elsewhere. The Physics Services and Support group at CERN provides database services for the physics community. With an installed base of several TB-sized database clusters, the service is designed to accommodate growth for data processing generated by the LHC experiments and LCG services. During the last year, the physics database services went through a major preparation phase for LHC start-up and are now fully based on Oracle clusters on Intel/Linux. Over 100 database server nodes are deployed today in some 15 clusters serving almost 2 million database sessions per week. This paper will detail the architecture currently deployed in production and the results achieved in the areas of high availability, consolidation and scalability. Service evolution plans for the LHC start-up will also be discussed.

Power Product Equipment Technician: Outboard-Engine Systems and Service. Teacher Edition [and] Student Edition.

Science.gov (United States)

Hilley, Robert

This curriculum guide contains teacher and student materials for a course on outboard-engine boat systems and service for power product equipment technician occupations. The course contains the following four units of instruction: (1) Outboard-Engine Design and Identification; (2) Operation and Service of Engine-Support Systems; (3) Operation and…

Emission characteristics and size distribution of polycyclic aromatic hydrocarbons from coke production in China

Science.gov (United States)

Mu, Ling; Peng, Lin; Liu, Xiaofeng; He, Qiusheng; Bai, Huiling; Yan, Yulong; Li, Yinghui

2017-11-01

Coking is regarded as a major source of atmospheric polycyclic aromatic hydrocarbons (PAHs), but few researches have been conducted on the emission characteristics of PAHs from coke production. In this study, emissions of size-segregated particulate matter (PM) and particle-bound PAHs emitted from charging of coal (CC) and pushing of coke (PC) in four typical coke plants were determined. The emission factors on average, sums of CC and PC, were 4.65 mg/kg, 5.96 mg/kg, 19.18 μg/kg and 20.69 μg/kg of coal charged for PM2.1 (≤ 2.1 μm), PM, PAHs in PM2.1 and total-PAHs, respectively. PM and PAHs emission from plants using stamp charging were significantly more than those using top charging. The profile of PAHs in PM with size ≤ 1.4 μm (PM1.4) emitted from CC process were similar with that from PC, however, it revealed obviously different tendency for PAHs in PM with size > 1.4 μm, indicating the different formation mechanism for coarse particles emitted from CC and PC. Size distributions of PM and PAHs indicated that they were primarily connected with PM1.4, and the contributions of PM1.4 to PM and PAHs emitted from the plants using stamp charging were higher than those using top charging. Some improved technology in air-pollution control devices should be considered in coke production in future based on the considerable impacts of PM1.4 and PAHs on human health and ambient air quality.

Size structure of marine soft-bottom macrobenthic communities across natural habitat gradients: implications for productivity and ecosystem function.

Directory of Open Access Journals (Sweden)

Tara A Macdonald

Full Text Available Size distributions of biotic assemblages are important modifiers of productivity and function in marine sediments. We investigated the distribution of proportional organic biomass among logarithmic size classes (2(-6J to 2(16J in the soft-bottom macrofaunal communities of the Strait of Georgia, Salish Sea on the west coast of Canada. The study examines how size structure is influenced by 3 fundamental habitat descriptors: depth, sediment percent fines, and organic flux (modified by quality. These habitat variables are uncorrelated in this hydrographically diverse area, thus we examine their effects in combination and separately. Cluster analyses and cumulative biomass size spectra reveal clear and significant responses to each separate habitat variable. When combined, habitat factors result in three distinct assemblages: (1 communities with a high proportion of biomass in small organisms, typical of shallow areas (3 g C/m(2/yr/δ(15N from the Fraser River; and (3 communities with biomass dominated by moderately large organisms, but lacking the smallest and largest size classes, typical of deep, fine sediments experiencing low modified organic flux (<3.0 gC/m(2/yr/δ(15N. The remaining assemblages had intermediate habitat types and size structures. Sediment percent fines and flux appear to elicit threshold responses in size structure, whereas depth has the most linear influence on community size structure. The ecological implications of size structure in the Strait of Georgia relative to environmental conditions, secondary production and sediment bioturbation are discussed.

Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

DEFF Research Database (Denmark)

Schipull Kauschen, Jan

2012-01-01

extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...... on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...

Getting out what we put in: productivity of the English National Health Service.

Science.gov (United States)

Castelli, Adriana; Laudicella, Mauro; Street, Andrew; Ward, Padraic

2011-07-01

Many countries are incorporating direct measures of non-market outputs in the national accounts. For any particular output to be included there has to be data about it for two adjacent periods. This is problematic because the classification of non-market outputs is often subject to wholesale revision. We outline the challenges associated with classification changes and propose a solution. To illustrate we construct output and input indices and estimate productivity growth of the English National Health Service (NHS) for the period 2003-2004 to 2007-2008. Our index of output growth incorporates all care provided to NHS patients and captures improvements in survival rates, waiting times and disease management. We find that more patients are being treated and the quality of the care they receive has been improving. We implement our approach to dealing with changes as to how health services are defined and show what effect this has on estimates of output growth. Our index of input growth captures all labour, intermediate and capital inputs into health service production and we improve on how capital has been measured in the past. Inputs have increased over time but there has also been a slowdown since 2005-2006, primarily the result of a levelling off in staff recruitment and less reliance on the use of agency staff. Productivity is assessed by comparing output growth with growth in inputs, the net effect being constant productivity growth between 2003-2004 and 2007-2008.

Product services for a resource-efficient and circular economy - A review

NARCIS (Netherlands)

Tukker, A.

2015-01-01

Since the 1990s, Product Service Systems (PSS) have been heralded as one of the most effective instruments for moving society towards a resource-efficient, circular economy and creating a much-needed 'resource revolution'. This paper reviews the literature on PSS in the last decade and compares the

Marketing channels of banking products and services in contemporary business environment

OpenAIRE

Rakita Aleksandra

2016-01-01

Marketing application in banking is dating back to the 50s of 20th century, and since then its role is constantly changing. His modern role of synthesis of analysis, planning and control of the bank in the financial markets, achieved by the use of instruments of marketing mix (product, price, distribution and promotion). The paper is an analysis of the distribution function, and is primarily an overview of the modern distribution channels of banking products and services in the US, as the mos...

Cloud-based design and manufacturing (CBDM) a service-oriented product development paradigm for the 21st century

CERN Document Server

2014-01-01

The book introduces the reader to game-changing ways of building and utilizing Internet-based services related to design and manufacture activities through the cloud. In a broader sense, CBDM refers to a new product realization model that enables collective open innovation and rapid product development with minimum costs through social networking and negotiation platforms between service providers and consumers. It is a type of parallel and distributed system consisting of a collection of inter-connected physical and virtualized service pools of design and manufacturing resources as well as intelligent search capabilities for design and manufacturing solutions. Practicing engineers and decision makers will learn how to strategically position their product development operations for success in a globalized interconnected world.

A strategic analysis of a service company in the film and television industry in Canada

OpenAIRE

Nex, Cheryl

2006-01-01

EP Canada Limited Partnership, a wholly owned subsidiary of Rainmaker Income Fund, is the leading ‘full service’ provider of payroll and employer-of-record services to the film and television industry in Canada. The size of the payroll volume outsourced in the film and television industry in Canada is directly correlated to the level of production activity in Canada. After several consecutive years of growth, the production of feature films and television programs, in Canada, is in ...

Hiring, Developing, and Organizing Individual Employees for New Product Development versus Product-related Service Innovation

DEFF Research Database (Denmark)

Knudsen, Mette Præst; Schleimer, Stephanie

should be hired. For the latter case, these employees’ individual careers must be developed internally once hired. The paper therefore carries important implication for the innovation management literature and related human resource practices at different organizational levels.......This study examines how manufacturing firms should organize their human resources by maximizing the value of individual employees for different forms of innovations. In particular, it examines the hiring, developing, and structural organization of human resources for optimizing different innovation...... the value of human resource hiring and developing practices for new product development success; organizations will find it more beneficial to invest predominantly in employees with the highest possible educational level, whilst for product-related service innovations; employees with more general skills...

Rates of molecular evolution in tree ferns are associated with body size, environmental temperature, and biological productivity.

Science.gov (United States)

Barrera-Redondo, Josué; Ramírez-Barahona, Santiago; Eguiarte, Luis E

2018-05-01

Variation in rates of molecular evolution (heterotachy) is a common phenomenon among plants. Although multiple theoretical models have been proposed, fundamental questions remain regarding the combined effects of ecological and morphological traits on rate heterogeneity. Here, we used tree ferns to explore the correlation between rates of molecular evolution in chloroplast DNA sequences and several morphological and environmental factors within a Bayesian framework. We revealed direct and indirect effects of body size, biological productivity, and temperature on substitution rates, where smaller tree ferns living in warmer and less productive environments tend to have faster rates of molecular evolution. In addition, we found that variation in the ratio of nonsynonymous to synonymous substitution rates (dN/dS) in the chloroplast rbcL gene was significantly correlated with ecological and morphological variables. Heterotachy in tree ferns may be influenced by effective population size associated with variation in body size and productivity. Macroevolutionary hypotheses should go beyond explaining heterotachy in terms of mutation rates and instead, should integrate population-level factors to better understand the processes affecting the tempo of evolution at the molecular level. © 2018 The Author(s). Evolution © 2018 The Society for the Study of Evolution.

Scotblood 2015: Improving and delivering blood products, novel cellular therapies, and celebrating patients and donor engagement within transfusion services.

Science.gov (United States)

Colligan, David; McGowan, Neil; Seghatchian, Jerard

2016-08-01

Blood Transfusion Services are striving to continually improve the efficacy and quality of their blood products whilst also simultaneously diversifying into novel cellular products. For this to be successful the relationships between the various arms of the organisation must be strong and interlinked. As new technologies impact on the products that blood transfusion services supply it should be noted that the interaction between the service and its donor base is also affected by advancing technologies. Social media has fundamentally altered the way in which the public can access information and news, as such blood services must engage and interact appropriately with these new forms of media. As a reflection of these challenges the Scotblood 2015 programme was focussed on service and product improvement, donor engagement and people centred transfusion. This commentary comprises summaries of the presentations, based in part on the abstracts provided by the speakers. Copyright © 2016. Published by Elsevier Ltd.

Measuring service line competitive position. A systematic methodology for hospitals.

Science.gov (United States)

Studnicki, J

1991-01-01

To mount a broad effort aimed at improving their competitive position for some service or group of services, hospitals have begun to pursue product line management techniques. A few hospitals have even reorganized completely under the product line framework. The benefits include focusing accountability for operations and results, facilitating coordination between departments and functions, stimulating market segmentation, and promoting rigorous examination of new and existing programs. As part of its strategic planning process, a suburban Baltimore hospital developed a product line management methodology with six basic steps: (1) define the service lines (which they did by grouping all existing diagnosis-related groups into 35 service lines), (2) determine the contribution of each service line to total inpatient volume, (3) determine trends in service line volumes (by comparing data over time), (4) derive a useful comparison group (competing hospitals or groups of hospitals with comparable size, scope of services, payer mix, and financial status), (5) review multiple time frames, and (6) summarize the long- and short-term performance of the hospital's service lines to focus further analysis. This type of systematic and disciplined analysis can become part of a permanent strategic intelligence program. When hospitals have such a program in place, their market research, planning, budgeting, and operations will be tied together in a true management decision support system.

Nutrition Labeling and Portion Size Information on Children's Menus in Fast-Food and Table-Service Chain Restaurants in London, UK

Science.gov (United States)

Reeves, Sue; Wake, Yvonne; Zick, Andrea

2011-01-01

Objective: To investigate meals, price, nutritional content, and nutrition and portion size information available on children's menus in fast-food and table-service chain restaurants in London, since the United Kingdom does not currently require such information but may be initiating a voluntary guideline. Methods: Children's menus were assessed…

Microphysical Parameterizations for NWP: It's All About the Sizes and Production Pathways of Hydrometeors

Science.gov (United States)

Michelson, Sara A.; Bao, Jian-Wen; Grell, Evelyn D.

2017-04-01

Bulk microphysical parameterization schemes are popularly used in numerical weather prediction (NWP) models to simulate clouds and precpitation. These schemes are based on assumed number distribution functions for individual hydrometeor species, which are integratable over size distributions of diameters from zero to infinity. Typically, hydrometeor mass and number mixing ratios are predicted in these schemes. Some schemes also predict a third parameter of hydrometeor distribution characteristics. In this study, four commonly-used microphysics schemes of various complexity that are available in the Weather Research and Forecasting Model (WRF) are investigated and compared using numerical model simulations of an idealized 2-D squall line and microphysics budget analysis. Diagnoses of the parameterized pathways for hydrometeor production reveal that the differences related to the assumptions of hydrometeor size distributions between the schemes lead to the differences in the simulations due to the net effect of various microphysical processes on the interaction between latent heating/evaporative cooling and flow dynamics as the squall line develops. Results from this study also highlight the possibility that the advantage of double-moment formulations can be overshadowed by the uncertainties in the spectral definition of individual hydrometeor categories and spectrum-dependent microphysical processes. It is concluded that the major differences between the schemes investigated here are in the assumed hydrometeor size distributions and pathways for their production.

THE EFFECT OF PRODUCTS, PRICE AND SERVICE QUALITY ON CUSTOMER SATISFACTION IN “RICE FOR THE POORS” PROGRAM

Directory of Open Access Journals (Sweden)

Surip N.

2017-12-01

Full Text Available This study aimed to determine and analyze the partial influence of product variables, price and service quality on consumer satisfaction in Indonesian government’s “Rice for the Poors” (“Beras Miskin”, abbreviated as “Raskin” program, as well as the influence of product variable, price and service quality simultaneously to customer satisfaction in the program. The sampling method used is proportionate stratified random sampling. The research is conducted in West Bandung regency, Jawa Barat (West Java Province with a population of 86.908 RTS-PM, and data collection was conducted on October 2015. The method of analysis used in this research is the analysis of correlation and linear regression. The results of the study conclude that the variable of product, price and quality of service simultaneously or partially possess positive and significant effect on consumer satisfaction in Raskin program. The service quality is one of the strong variables that influence the consumer satisfaction, followed by price and product variables.

Stocking density effects on production characteristics and body composition of market size cobia, Rachycentron canadum, reared in recirculating aquaculture systems

Science.gov (United States)

Production density in excess of a critical threshold can result in a negative relationship between stocking density and fish production. This study was conducted to evaluate production characteristics of juvenile cobia Rachycentron canadum, reared to market size in production-scale recirculating aq...

Production and Characterisation of Microfine Sized Palm Oil Fuel Ash (POFA Originated from Bau, Lundu Palm Oil Mill

Directory of Open Access Journals (Sweden)

Ahmadi R.

2017-01-01

Full Text Available This paper investigates an effective and economical way for laboratory scale production of micro fine sized palm oil fuel ash (POFA using an electric powder grinder. The raw POFA obtained from the palm oil mill is initially grinded by using Los Angeles abrasion machine, and then sieved using 150 μm sieve before it is burned in a furnace at 500°C. The burned POFA is then grinded using electric powder grinder to obtain the targeted micro fine sized. The physical, morphological and chemical properties of the micro fine sized POFA produced are analysed in the form of cement paste using Particle Size Analyzer (PSA, nitrogen sorption by using BET method, Fourier Transform Infrared Spectroscopy (FT-IR and Scanning Electron Microscopy (SEM with Energy Dispersive Spectroscopy (EDS. The results show that 96% micro fine sized POFA is produced when using the optimum grinding process. The microstructural analyses of cement paste with 20% micro fine sized POFA replacement give the optimum results that contribute to higher compressive strength. The overall results of this research show that the optimum grinding process by using electric powder grinder is relevant and can be used as pioneering work in the concrete production industry.

Linking size and age at sexual maturation to body growth, productivity and recruitment of Atlantic cod stocks spanning the North Atlantic

DEFF Research Database (Denmark)

Köster, Fritz; Trippel, E.A.; Tomkiewicz, Jonna

2013-01-01

Sexual maturation patterns of 22 North Atlantic stocks of cod (Gadus morhua) were examined and related to geographical distribution area, ambient water temperature, growth and surplus production. Four patterns were identified, i.e. sexual maturation early in life at small size, early in life...... Atlantic stocks. This comparative analysis suggests that maturation patterns relate to growth potential and surplus production whereas annual production of recruits per unit biomass appears unrelated to average size at sexual maturation...

Reconceptualising Shared Services

Directory of Open Access Journals (Sweden)

Peter McKinlay

2011-12-01

Full Text Available Endeavours to improve the efficiency and effectiveness of local government have been a persistent theme both of politicians in higher tiers of government and of interest groups, especially business. The two contenders for improvement which receive most coverage both in the research literature and in popular discussion are amalgamation and shared services. Arguments from the literature have generally favoured shared services over amalgamation. Bish (2001 in a comprehensive review of North American research dismisses the argument for amalgamation as a product of flawed nineteenth-century thinking and a bureaucratic urge for centralized control. He does so making the very reasonable point that the presumed economies of scale which will result from amalgamation are a function not of the size and scale of individual local authorities, but of the services for which those local authorities are responsible, and the point at which economies of scale will be optimised will be very different for different services. The case against amalgamation is also reinforced by the absence of any significant post-facto evidence that amalgamation achieves either the promised savings or the anticipated efficiency gains (McKinlay 2006.

78 FR 18234 - Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United...

Science.gov (United States)

2013-03-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1005 [Docket No. FDA-2007-N-0091; (formerly 2007N-0104)] Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United States; Agent Designation; Change of Address AGENCY: Food and Drug...

Silicon microfluidic flow focusing devices for the production of size-controlled PLGA based drug loaded microparticles.

Science.gov (United States)

Keohane, Kieran; Brennan, Des; Galvin, Paul; Griffin, Brendan T

2014-06-05

The increasing realisation of the impact of size and surface properties on the bio-distribution of drug loaded colloidal particles has driven the application of micro fabrication technologies for the precise engineering of drug loaded microparticles. This paper demonstrates an alternative approach for producing size controlled drug loaded PLGA based microparticles using silicon Microfluidic Flow Focusing Devices (MFFDs). Based on the precise geometry and dimensions of the flow focusing channel, microparticle size was successfully optimised by modifying the polymer type, disperse phase (Qd) flow rate, and continuous phase (Qc) flow rate. The microparticles produced ranged in sizes from 5 to 50 μm and were highly monodisperse (coefficient of variation <5%). A comparison of Ciclosporin (CsA) loaded PLGA microparticles produced by MFFDs vs conventional production techniques was also performed. MFFDs produced microparticles with a narrower size distribution profile, relative to the conventional approaches. In-vitro release kinetics of CsA was found to be influenced by the production technique, with the MFFD approach demonstrating the slowest rate of release over 7 days (4.99 ± 0.26%). Finally, MFFDs were utilised to produce pegylated microparticles using the block co-polymer, PEG-PLGA. In contrast to the smooth microparticles produced using PLGA, PEG-PLGA microparticles displayed a highly porous surface morphology and rapid CsA release, with 85 ± 6.68% CsA released after 24h. The findings from this study demonstrate the utility of silicon MFFDs for the precise control of size and surface morphology of PLGA based microparticles with potential drug delivery applications. Copyright © 2014 Elsevier B.V. All rights reserved.

Rotary bayonets for cryogenic and vacuum service

International Nuclear Information System (INIS)

Rucinski, R.A.; Dixon, K.D.; Krasa, R.; Krempetz, K.J.; Mulholland, G.T.; Trotter, G.R.; Urbin, J.B.

1993-07-01

Rotary bayonets were designed, tested, and installed for liquid nitrogen, liquid argon, and vacuum service. This paper will present the design, testing, and service record for two sizes of vacuum jacketed cryogenic rotary bayonets and two sizes of vacuum service rotary bayonets. Materials used in construction provide electrical isolation across the bayonet joint. The joint permits 360 degrees of rotation between the male and female pipe sections while maintaining integrity of service. Assemblies using three such joints were built to allow end connection points to be translated through at least 1 meter of horizontal travel while kept in service. Vacuum jacketed sizes built in-house at Fermi National Accelerator Laboratory are 1-1/2 in. inner pipe size, 3 in. vacuum jacket, and 4 in. inner pipe size, 6 in. vacuum jacket The single wall vacuum service bayonets are in 4 in. and 6 in. pipe sizes. The bayonets have successfully been in active service for over one year

Rotary bayonets for cryogenic and vacuum service

International Nuclear Information System (INIS)

Rucinski, R.A.; Dixon, K.D.; Krasa, R.; Krempetz, K.J.; Mulholland, G.T.; Trotter, G.R.; Urbin, J.B.

1994-01-01

Rotary bayonets were designed, tested, and installed for liquid nitrogen, liquid argon, and vacuum service. This paper will present the design, testing, and service record for two sizes of vacuum jacketed cryogenic rotary bayonets and two sizes of vacuum service rotary bayonets. Materials used in construction provide electrical isolation across the bayonet joint. The joint permits 360 degrees of rotation between the male and female pipe sections while maintaining integrity of service. Assemblies using three such joints were built to allow end connection points to be translated through at least 1 meter of horizontal travel while kept in service. Vacuum jacketed sizes built in-house at Fermi National Accelerator Laboratory are 1 1/2 inches inner pipe size, 3 inches vacuum jacket, and 4 inches inner pipe size, 6 inches vacuum jacket. The single wall vacuum service bayonets are in 4 inch and 6 inch pipe sizes. The bayonets have successfully been in active service for over one year

CITYZER - Services for effective decision making and environmental resilience

Science.gov (United States)

Haukka, Harri; Turtiainen, Heikki; Janka, Kauko; Palonen, Henry; Turpeinen, Jani; Viitala, Erkki; Rönkkö, Topi; Laiho, Tiina; Laitinen, Teija; Harri, Ari-Matti; Schmidt, Walter; Nousiainen, Timo; Niemi, Jarkko

2017-04-01

for air quality instrumentation and products), INNO-W Ltd (business services support), as well as the CLIC Innovation Ltd as a subcontractor for arranging cooperation with international partners and project information dissemination, as well as composing the consortium agreement and other legal issues. The business impact of this project to existing markets is estimated to be substantial and it will also create totally new markets especially for weather information related services. The existing whole target market size at this point is estimated to be several billion USD and the size of the market is growing steadily. The key CITYZER outcomes are the piloted services and products with envisaged great commercial and export potential. Development of the services will be managed by INNO-W supported by Sasken, Emtele, Pegasor and Vaisala. The user profiling and market assessment, including Asia and South America, will be led by Haaga-Helia supported by INNO-W and Sasken. FMI, Vaisala and Pegasor will use their expertise and current business relations to those foreign markets to speed up and guide the user and market evaluation. Essential potential players are local business school teams in Brazil and India that will be subcontracted to bring in local expertise in the user profiling and market assessment processes. This three year project is scheduled such that, overall, the first two years focus on implementing the technical basis as well as customer and market analyses. Throughout the course of the project a CityzerDemo environment will be developed in the Helsinki metropolitan area, demonstrating the observational and modeling system and services built on them. In addition, the services and business models will be evaluated. Acknowledgements The project has received funding from TEKES, the Finnish Funding Agency for Innovation. References [1] http://mmea.fi/ [2] http://edhit.eu/ [3] http://www.vaisala.com/en/products/metdatamanagementsystems/Pages/NM10.aspx

Innovation in Services: From Service Concepts to Service Experiences

OpenAIRE

Fynes, Brian; Lally, Anne Marie

2008-01-01

ABSTRACT Identifying the nature of service experiences is recognised As being of primary importance in the shaping of an enhanced competitive position for industry; however service managers often have difficulty articulating the true nature of their service concept. The definition of service concept is a fundamental part of the strategic advantage seeking Processes of service design, service development and service innovation. In response to the competitive Imperative for improved product/...

77 FR 2308 - Approval of Altol Petroleum Product Service, as a Commercial Gauger

Science.gov (United States)

2012-01-17

...: Notice is hereby given that, pursuant to 19 CFR 151.13, Altol Petroleum Product Service, Parque Industrial Sabanetas, Edificio M- 1380-01-02, Ponce, PR 00731, has been approved to gauge petroleum...

Inventory control for a perishable product with non-stationary demand and service level constraints

NARCIS (Netherlands)

Pauls-Worm, K.G.J.; Hendrix, E.M.T.; Haijema, R.; Vorst, van der J.G.A.J.

2013-01-01

We study the practical production planning problem of a food producer facing a non-stationary erratic demand for a perishable product with a fixed life time. In meeting the uncertain demand, the food producer uses a FIFO issuing policy. The food producer aims at meeting a certain service level at

Engaging teenagers productively in service design.

Science.gov (United States)

Bowen, Simon; Sustar, Helena; Wolstenholme, Daniel; Dearden, Andy

2013-09-01

Engaging young people in participatory design can be challenging, particularly in health-related projects. In a study co-designing diabetes support and information services with teenagers, we found framing activities using popular culture was a useful strategy. Various cultural references helped us stage activities that were productive for the design process, and were engaging for our young participants (e.g. exploring practical implications through discussions in a 'Dragons' Den'). Some activities were more effective than others and the idea of language-games , which has been widely explored in participatory design, explains why our strategy was successful when there was a clear 'family resemblance' between the popular cultural references and certain essential stages of designing. However, attention is required in selecting appropriate cultural references if this strategy is adopted elsewhere, and design facilitators should focus first on devising accessible language-games, rather than expecting popular cultural references to provide complete solutions to the challenge of staging participatory design.

Promotion of alternative-sized personal protective equipment.

Science.gov (United States)

Flynn, Michael A; Keller, Brenna; DeLaney, Sheli C

2017-12-01

With more diversity in the workforce, companies are producing PPE such as hard hats, safety glasses, coveralls, foot protection, and safety harnesses for a larger range of body shapes and sizes. However, gray literature reports suggest that barriers exist to getting alternate sized PPE from the manufacturer to the workers who need it. The purpose of this study is to determine the extent to which alternative-sized PPE is marketed. A web-based review of seven major manufacturers of PPE was conducted to determine: (a) whether or not they offer alternative-sized products, (b) if these products are clearly labeled, and (c) if images used to display PPE are representative of a diverse workforce. Of the seven PPE manufacturers investigated, six had at least one product that was marketed as gender and/or size alternatives however, alternative sizes were more common for larger body types. Alternative-sized products rarely included size charts, and the models used to display PPE were overwhelmingly white males of average size. Despite the growing availability of alternative-sized PPE, it can be difficult to find these products, which suggests that they are rarely promoted or labeled as alternative-sized. Our study indicates that companies should expand their product lines and more aggressively market and promote these items. Guidance on how to properly fit their products would also be extremely helpful to the end-user. Manufacturers could improve the availability of alternative-sized PPE and increase their promotion of these products on their websites and in their catalogs. Individual companies and safety professionals may assist in this process by demonstrating demand for alternative-sized PPE. Published by Elsevier Ltd.