Through-life engineering services motivation, theory, and practice

CERN Document Server

Roy, Rajkumar

2015-01-01

Demonstrating the latest research and analysis in the area of through-life engineering services (TES), this book utilizes case studies and expert analysis from an international array of practitioners and researchers – who together represent multiple manufacturing sectors: aerospace, railway and automotive – to maximize reader insights into the field of through-life engineering services. As part of the EPSRC Centre in Through-life Engineering Services program to support the academic and industrial community, this book presents an overview of non-destructive testing techniques and applications and provides the reader with the information needed to assess degradation and possible automation of through-life engineering service activities . The latest developments in maintenance-repair-overhaul (MRO) are presented with emphasis on cleaning technologies, repair and overhaul approaches and planning and digital assistance. The impact of these technologies on sustainable enterprises is also analyzed. This book wil...

Service life prediction for 50-year-old buildings in marine environments

Directory of Open Access Journals (Sweden)

Agustín Sánchez-Deza

2018-03-01

Full Text Available Steel reinforcing bars are often coated with rusts formed during service in reinforced concrete (RC structures. Rust layers growing on steel rebars induce expansive stresses and cause cracking on cover concrete. This study uses steel corrosion rate results measured on reinforced concrete buildings of more than 50 years of age located in marine environments and considers the pressure generated by the volume expansion of corrosion product layers to calculate the service life of the RC structures using a numerical simulation, estimating the time to corrosion cracking of the concrete cover. Akaganeite, goethite, lepidocrocite, hematite, magnetite and maghemite were identified by X-ray diffraction as crystalline phase constituents of the rust layers.

A Model for Service Life Control of Selected Device Systems

Directory of Open Access Journals (Sweden)

Zieja Mariusz

2014-04-01

Full Text Available This paper presents a way of determining distribution of limit state exceedence time by a diagnostic parameter which determines accuracy of maintaining zero state. For calculations it was assumed that the diagnostic parameter is deviation from nominal value (zero state. Change of deviation value occurs as a result of destructive processes which occur during service. For estimation of deviation increasing rate in probabilistic sense, was used a difference equation from which, after transformation, Fokker-Planck differential equation was obtained [4, 11]. A particular solution of the equation is deviation increasing rate density function which was used for determining exceedance probability of limit state. The so-determined probability was then used to determine density function of limit state exceedance time, by increasing deviation. Having at disposal the density function of limit state exceedance time one determined service life of a system of maladjustment. In the end, a numerical example based on operational data of selected aircraft [weapon] sights was presented. The elaborated method can be also applied to determining residual life of shipboard devices whose technical state is determined on the basis of analysis of values of diagnostic parameters.

Service life prediction and fibre reinforced cementitious composites

DEFF Research Database (Denmark)

Stoklund Larsen, E.

The present Ph.D.thesis addresses the service life concept on the fibre reinforced cementitious composites. The advantages and problems of adding fibre to a cementitious matrix and the influence on service life are described. In SBI Report 221, Service life prediction and cementitious somposites......, the factors affecting the pure cementitious composite are described. Different sizes and types of fibre reinforced crmentitious composites have been chosen to illustrate different ageing and deterioration mechanisms. Some ageing mechanisms can be accelerated and others cannot which is demonstrated in a test...... programme. Moisture, micro structural and mechanical properties were measured before, during and after ageing, with the purpose of giving a detailed "picture" of the materials during ageing....

Measuring service life and evaluating the quality of solid tires

Directory of Open Access Journals (Sweden)

Charoenyut Dechwayukul

2010-08-01

Full Text Available The objective of this research is to propose procedures for measuring service life and evaluating the quality of locallymade and used solid tires in Thailand. The solid tires were stressed and rotated until blowout on a drum-like test apparatuswhich is designed, constructed by the authors and equipped with laboratory instrumentation. Solid tires from five differentmanufacturers were selected for testing. We measured service life, length of time to tire failure, at three different loadingamplitudes and three different speeds on the testing drum. The service life of all specimens was studied and compared todetermine the possibility of using service life to evaluate the quality of a solid tire.

Calculating the price of tanks, vessels and process equipment of petrochemical industry second criteria of integrity and survival remaining of API RP 579 (Fitness for service); Calculo do preco de tanques, vasos e equipamentos de processo da industria petroquimica segundo criterios de integridade e sobrevida remanescente do API RP 579 (Fitness for service)

Energy Technology Data Exchange (ETDEWEB)

Morato, Paulo Cesar Vidal Morato [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2012-07-01

By owning many tanks, vessels and process equipment, PETROBRAS has developed the concept of 'Fitness-For-Service' (suitability for use) under the standard API RP 579, i.e. to verify the structural integrity and remaining useful life of equipment in service. In this paper we will discuss how to calculate the remaining useful life of equipment used in accordance with such criteria and with this technical data, calculate the depreciated price. Steps: verification of applicability; surveys of the technical data of the equipment; surveys the minimum thickness of plating equipment over the years; calculation of the average annual rate of corrosion (tc); calculation of the required minimum thickness according to the criteria of API RP 579 (tr); calculation of remaining useful life (nr); calculation of the depreciated price (Vd) equipment. Conclusions: intended for evaluation of tanks price, vessels and process equipment according to API RP 579 concepts. Estimate the remaining useful life of equipment used and calculates the depreciated price. Scientific method based, consistent and robust, due to calculating established the remaining useful life. (author)

Reinforcement Corrosion: Numerical Simulation and Service Life Prediction

DEFF Research Database (Denmark)

Michel, Alexander

defects and b) define the end of service life once reinforcement corrosion is initiated neglecting corrosion processes during the propagation stage. The goal of this work was to develop a framework for the service life prediction of reinforced concrete covering initiation and propagation of chloride......Modelling of deterioration processes in concrete structures plays an increasing role in the design of reinforced concrete structures. Large sums are spent every year to ensure the durability of concrete structures, especially towards reinforcement corrosion. Improved durability provides increased...... structural reliability, economical improvements in form of less need for maintenance and repair as well as increased sustainability due to an increased energy and resource efficiency. Several service life prediction models dealing with reinforcement corrosion in concrete structurescan be found...

Influence of service life on Life Cycle Assessments

NARCIS (Netherlands)

van Nunen, H.; Hendriks, N.A.; Erkelens, P.A.

2003-01-01

Environmental assessment is part of present decision making. But, because of difficulties the assessments are not as profound as could be. Life Cycle Assessment (LCA) is a cradle-to-grave approach and consequently a time factor is embedded. Until now this time factor is fixed and calculations are

Service factor calculated from an experimental simulation of chronic occupational irradiation

International Nuclear Information System (INIS)

Berikashvili, V.Sh.

1975-01-01

A correlation has been studied between the body weight, basal metabolism, lifespan, the period of water exchange, average life of erythrocytes and average rate of pulse-beat, and values LDsub(50/30-60), half-recovery period after irradiation and time of leucopenia occurrence in different species of laboratory animals and man. An authentic degree-interrelation of these indices has been revealed, and the dependency of radiobiological effects on the body weight of animals has been estimated. Similarity conditions of dose accumulation upon chronic irradiation of animals and man have been obtained on the basis of Blair's and Davidson's equations for an effective dose of a single exposure. Service factor and coefficients of intensity and duration of irradiation of various animals have been calculated, simulating professional irradiation with 5 rad/a within 20 years

Forecasts on service life by fracture mechanics methods

International Nuclear Information System (INIS)

Munz, D.

1985-01-01

The service life of many component parts can frequently be divided into the stages up to the formation of a crack and of crack propagation. This holds good of fatigue crack, stress corrosion crack, and also in many cases of creep. But often the crack propagation stage is the only one of interest for service life forecasts if cracks must be reckoned with already on putting parts into service. Cracks in welding constructions are typical examples. Crack- and -fracture mechanics deal with the laws underlying crack propagation and provide quantitative information on crack propagation behaviour. (orig./DG) [de

Life time calculations for LCF loading combined with tensional hold periods

International Nuclear Information System (INIS)

Bocek, M.; Armas, A.; Piel, D.

1983-01-01

The life time in high amplitude strain cycling with tensional hold periods is analysed presuming that creep failure damage is life determining. The life fraction rule (LFR) is used to calculate the life time consumpted during the dwell period in strain controlled tests as well as during tensional hold time stress cycles. It follows from the present investigation that stress relaxation occurring during the strain hold periods plays the dominant influence upon the relationship between life and dwell time. For strong stress relaxation (e.g. high temperature) less damage is accumulated as compared to suppressed relaxation (low temperature). The damage in stress relaxation is calculated by means of the LFR and the results are compared to experiments conducted on Zircaloy-4 and the austenitic stainless stell Type AISI 304. From the very good agreement between both it is concluded that under the loading conditions considered, creep failure damage is the main life determining damage contribution. (orig.)

Medicare Data to Calculate Your Primary Service Areas

Data.gov (United States)

U.S. Department of Health & Human Services — The following data is being made available to applicants to the Medicare Shared Savings Program (Shared Savings Program), in order to allow them to calculate their...

Evaluation of Hose in Hose Transfer Line Service Life for Hanfords Interim Stabilization Program

International Nuclear Information System (INIS)

TORRES, T.D.

2001-01-01

RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program (Torres, 2000a), defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of waste transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program (Torres, 2000b), has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications associated with Interim Stabilization. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning, RPP-6028 Section 3.2.7. Performance Incentive Number ORP-05 requires that all the Single Shell Tanks be Interim Stabilized by September 30, 2003. The Tri-Party Agreement (TPA) milestone M-41-00, enforced by a federal consent decree, requires all the Single Shell Tanks to be Interim stabilized by September 30, 2004. By meeting the Performance Incentive the TPA milestone is met. Prudent engineering dictates that the equipment used to transfer waste have a life in excess of the forecasted operational time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer, published literature and calculations. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are the hose material's resistance to the harmful effects of process fluid characteristics, ambient environmental conditions, exposure to ionizing radiation and the

End-of-Life Inventory Decisions of Service Parts

NARCIS (Netherlands)

M. Pourakbar (Morteza)

2011-01-01

textabstractWith the spurt of technology and innovation the life cycles of parts and products have become shorter and service parts enter their final phases earlier. Final phase of a typical service part starts once the part production is ceased and ends when the last service or warranty contract

Reactor coolant pump service life evaluation for current life cycle optimization and license renewal

International Nuclear Information System (INIS)

Doroshuk, B.W.; Berto, D.S.; Robles, M.

1990-01-01

This paper reports that as part of the plant life cycle management and license renewal program, Baltimore Gas and Electric Company (BG and E) has completed a service life evaluation of their reactor coolant pumps, funded jointly by EPRI and performed by ABB Combustion Engineering Nuclear Power. Two of the goals of the BG and E plant life cycle management and license renewal program, and of this current evaluation, are to identify actions which would optimize current plant operation, and ensure that license renewal remains a viable option. The reactor coolant pumps (RCPs) at BG and E's Calvert Cliffs Units 1 and 2 are Byron Jackson pumps with a diffuser and a single suction. This pump design is also used in many other nuclear plants. The RCP service life evaluation assessed the effect of all plausible age-related degradation mechanisms (ARDMs) on the RCP components. Cyclic fatigue and thermal embrittlement were two ARDMs identified as having a high potential to limit the service life of the pump case. The pump case is a primary pressure boundary component. Hence, ensuring its continued structural integrity is important

Identifying profiles of service users in housing services and exploring their quality of life and care needs

NARCIS (Netherlands)

Bitter, N.A.; Roeg, D.P.K.; Van Nieuwenhuizen, Ch.; Van Weeghel, J.

2016-01-01

Background Housing services aim to support people with mental illness in their daily life and recovery. As the level of recovery differs between service users, the quality of life and care needs also might vary. However, the type and amount of care and support that service users receive do not

Effect of the Length of Traffic Flow Records on the Estimate of a Bridge Service Life

Directory of Open Access Journals (Sweden)

Krejsa Jan

2016-12-01

Full Text Available The service life of bridges is significantly affected by fatigue of used material induced by heavy vehicles. Therefore, precise determination of the vehicle weight is of crucial importance for the calculation of fatigue damage and the prediction of the bridge serviceability. This paper investigates accuracy of the determination of fatigue depending on the length of traffic flow recording. The presented data were obtained from the measurements carried out on a bridge of the Prague Highway Ring. The analysis reveals that the optimal length of traffic recording is about 30 days.

Analytical evaluation of the roller bearing service life

Directory of Open Access Journals (Sweden)

Antsupov Aleksey

2017-01-01

Full Text Available An analytical method has been developed for the design evaluation of the service life of roller bearings by the criterion of contact endurance of elements that does not require carrying out the experimental studies. It is based on the kinetic approach to the description of the solids destruction process and the theory of parametric reliability of machine parts. In contradistinction to the standard empirical dependence, which is currently used, the method allows one to take into account the effect of the material properties, and basic design and operational parameters on the service life. The results of the theoretical studies of the service life of roller bearing No. 212 (DIN 5412 T1 are presented for the quantitative assessment of this effect. They showed that the temperature-force loading conditions or material properties that were not taken into account might result in the prediction error of 1.5 or more times.

Cultural services remediated in Second Life

DEFF Research Database (Denmark)

Heilesen, Simon

2008-01-01

In 2007, the Danish Public Libraries conducted an experiment in establishing a library in the virtual world Second Life. The Info Island DK provided the framework for a number of online library services and cultural events. This study, based on interviews with most of the active participants...... in the project, discusses the experiences in remediating conventional library services into the new medium and in understanding and redefining the role of the librarian in an online virtual world....

Enhanced design, operation and maintenance practices for a longer plant service life

International Nuclear Information System (INIS)

Raimondo, E.; Courcoux, A.

2004-01-01

Plant service life problems have been under detailed investigation in France and the experience acquired by our company over the past 25 years in the design, construction and maintenance of Pressurized Water Reactors has contributed to develop skills, equipment and capabilities available for efficient plant aging management and component service life extension. The service life of a nuclear power plant is deeply dependant of the provisions made during the design stage, directly linked to good operating conditions and adequate maintenance practices. This paper presents the importance of these three steps (design, operation and maintenance) for plant service life concern. (author)

Service life prediction. Development of models for predicting the service life of power plant components subject to thermomechanical creep fatigue; Lebensdauervorhersage. Entwicklung von Modellen zur Lebensdauervorhersage von Kraftwerksbauteilen unter thermisch-mechanischer Kriechermuedungsbeanspruchung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Cui, L.; Scholz, A. [Technische Univ. Darmstadt (Germany). Institut fuer Werkstoffkunde; Hartrott, P. von; Schlesinger, M. [Fraunhofer-Institut fuer Werkstoffmechanik (IWM), Freiburg im Breisgau (Germany)

2009-07-01

Extensive use is made of massive components of heat resistant and highly heat resistant materials in installations of the power and heating industry. These components are exposed to varying thermomechanical stress as a result of ramping-up and down processes. In this research project two computer-assisted methods of predicting service life until crack initiation were extended to include cases of thermomechanical multi-axis stress conducive to creep fatigue and of superposition of high-cycle stress on power plant components. Investigations were limited to rotor steel of type X12CrMoWVNbN10-1-1. Complex thermomechanical multi-axis experiments were performed on round, notched and cruciform test specimens of close-to-life dimensions in order to demonstrate by experiment the validity of these models. The results of these calculations showed an acceptable degree of agreement between experiment and simulation for both models. Calculations on earlier TMF experiments performed at IfW on hollow specimens of 1%CrMoNiV showed good predictability for both the SARA and the ThoMat programme. Calculations on experiments performed at MPA Stuttgart on model bodies consisting of the same 1%CrMoNiV showed a predictability of acceptable variability considering the complexity of the stresses involved. A further outcome of this project is that the use of SARA appears universally suitable for the construction of new plants and in the service area, while the use of ThoMat appears suited for detail optimisation in the development process.

Identifying profiles of service users in housing services and exploring their quality of life and care needs.

Science.gov (United States)

Bitter, Neis A; Roeg, Diana P K; van Nieuwenhuizen, Chijs; van Weeghel, Jaap

2016-11-23

Housing services aim to support people with mental illness in their daily life and recovery. As the level of recovery differs between service users, the quality of life and care needs also might vary. However, the type and amount of care and support that service users receive do not always match their recovery. In order to improve the quality of care, this study aims to explore whether subgroups of service users exist based on three dimensions of recovery and to examine and compare the quality of life and care needs of the persons in these subgroups. Latent class analysis was performed with data from 263 service users of housing services in the Netherlands. Classes were based on three variables: personal recovery (Mental Health Recovery Measure), social recovery (Social Functioning Scale), and clinical recovery (Brief Symptom Inventory). Subsequently, the quality of life (MANSA) and care needs (CANSAS) of the different classes were analysed by the use of descriptive and inferential statistics. Three classes could be distinguished. Class 1 (45%) comprised of people who score the highest of the three classes in terms of personal and social recovery and who experience the least number of symptoms. People in class 2 (44%) and class 3 (11%) score significantly lower on personal and social recovery, and they experience significantly more symptoms compared to class 1. The distinction between class 2 and 3 can be made on the significantly higher number of symptoms in class 3. All three classes differ significantly on quality of life and unmet needs. The quality of life of service users of housing services needs improvement, as even persons in the best-recovered subgroup have a lower quality of life than the average population. Workers of housing services need to be aware of the recovery of a client and what his or her individual needs and goals are. Furthermore, better care (allocation) concerning mental and physical health and rehabilitation is needed. Care should be

Analytical Method to Estimate Fatigue Life Time Duration in Service for Runner Blade Mechanism of Kaplan Turbines

Directory of Open Access Journals (Sweden)

Ana – Maria Budai

2010-10-01

Full Text Available The paper present an analytical method that can be used to determianted fatigue life time duration in service for runner blade mechanism of Kaplan turbines. The study was made for lever button of runer blade mechanism using two analytical relation to calculate the maximum number of stress cycles whereupon the mechanism work without any damage. To estimate fatigue life time duration will be used a formula obtained from one of most comon cumulative damage methodology taking in consideration the real exploatation conditions of a specified Kapaln turbine.

Advances in through-life engineering services

CERN Document Server

Roy, Rajkumar; Shaw, Andy

2017-01-01

This edited book offers further advances, new perspectives, and developments from world leaders in the field of through-life engineering services (TES). It builds up on the earlier book by the same authors entitled: “Through-life Engineering Services: Motivation, Theory and Practice.” This compendium introduces and discusses further, the developments in workshop-based and 'in situ' maintenance and support of high-value engineering products, as well as the application of drone technology for autonomous and self-healing product support. The links between ‘integrated planning’ and planned obsolescence, risk and cost modelling are also examined. The role of data, information, and knowledge management relative to component and system degradation and failure is also presented. This is supported by consideration of the effects upon the maintenance and support decision by the presence of 'No Fault Found' error signals within system data. Further to this the role of diagnostics and prognostics is also discusse...

DEVELOPING A SPATIAL PROCESSING SERVICE FOR AUTOMATIC CALCULATION OF STORM INUNDATION

Directory of Open Access Journals (Sweden)

H. Jafari

2017-09-01

Full Text Available With the increase in urbanization, the surface of earth and its climate are changing. These changes resulted in more frequent floodingand storm inundation in urban areas. The challenges of flooding can be addressed through several computational procedures. Due to its numerous advantages, accessible web services can be chosen as a proper format for determining the storm inundation. Web services have facilitated the integration and interactivity of the web applications. Such services made the interaction between machines more feasible. Web services enable the heterogeneous software systems to communicate with each other. A Web Processing Service (WPS makes it possible to process spatial data with different formats. In this study, we developed a WPS to automatically calculate the amount of storm inundation caused by rainfall in urban areas. The method we used for calculating the storm inundation is based on a simplified hydrologic model which estimates the final status of inundation. The simulation process and water transfer between subcatchments are carried out respectively, without user’s interference. The implementation of processing functions in a form of processing web services gives the capability to reuse the services and apply them in other services. As a result, it would avoid creating the duplicate resources.

Calculating the Fee-Based Services of Library Institutions: Theoretical Foundations and Practical Challenges

Directory of Open Access Journals (Sweden)

Sysіuk Svitlana V.

2017-05-01

Full Text Available The article is aimed at highlighting features of the provision of the fee-based services by library institutions, identifying problems related to the legal and regulatory framework for their calculation, and the methods to implement this. The objective of the study is to develop recommendations to improve the calculation of the fee-based library services. The theoretical foundations have been systematized, the need to develop a Provision for the procedure of the fee-based services by library institutions has been substantiated. Such a Provision would protect library institution from errors in fixing the fee for a paid service and would be an informational source of its explicability. The appropriateness of applying the market pricing law based on demand and supply has been substantiated. The development and improvement of accounting and calculation, taking into consideration both industry-specific and market-based conditions, would optimize the costs and revenues generated by the provision of the fee-based services. In addition, the complex combination of calculation leverages with development of the system of internal accounting together with use of its methodology – provides another equally efficient way of improving the efficiency of library institutions’ activity.

Quality of Services and Quality of Life from Service Providers' Perspectives: Analysis with Focus Groups

Science.gov (United States)

Jenaro, C.; Vega, V.; Flores, N.; Cruz, M.

2013-01-01

Background: Concepts such as support, quality of life and quality of services are customary in services for people with intellectual disabilities. The identification of the different ways of conceiving, prioritising and implementing these concepts by service providers can help to drive changes to achieve better personal outcomes for this…

MODELS OF FATIGUE LIFE CURVES IN FATIGUE LIFE CALCULATIONS OF MACHINE ELEMENTS – EXAMPLES OF RESEARCH

Directory of Open Access Journals (Sweden)

Grzegorz SZALA

2014-03-01

Full Text Available In the paper there was attempted to analyse models of fatigue life curves possible to apply in calculations of fatigue life of machine elements. The analysis was limited to fatigue life curves in stress approach enabling cyclic stresses from the range of low cycle fatigue (LCF, high cycle fatigue (HCF, fatigue limit (FL and giga cycle fatigue (GCF appearing in the loading spectrum at the same time. Chosen models of the analysed fatigue live curves will be illustrated with test results of steel and aluminium alloys.

Service life of 1-W, 0.985-μm solitary heterolasers

International Nuclear Information System (INIS)

Kochetkov, A A; Konyaev, V P

2001-01-01

The service life of solitary heterolasers at a temperature of 50 0 C (P = 1W, λ = 0.98 - 0.99 μm) is studied. The maximum service life of heterolasers under such working conditions is 60000 hours for an average pumping current 1.5 A. (lasers and amplifiers)

Serviceability modeling : predicting and extending the useful service life of FRT-plywood roof sheathing

Science.gov (United States)

Jerrold E. Winandy

2000-01-01

One of the most, if not the most, efficient methods of extending our existing forest resource is to prolong the service life of wood currently in-service by using those existing structures to meet our future needs (Hamilton and Winandy 1998). It is currently estimated that over 7 x 109 m3 (3 trillion bd. ft) of wood is currently in service within the United States of...

Calculation of the biological half-life of radioactive isotopes

International Nuclear Information System (INIS)

Szabo, S.A.

1982-01-01

The biological half-life of 137 Cs and 90 Sr was determined based on K and Ca metabolism and on the considerable chemical similarity of K and Ca, carriers of Cs and Sr, resp. The tsub(1/2)=a/bxln2 formula was used for the calculation, where a is the quantity of the element in question, while b is the daily need of the animal for the given element. The biological half-life for cattle of both 137 Cs and 90 Sr was found to be 30 days, while that for swine 20 days and 35 days respectively. (Sz.J.)

Managing rail service life

Directory of Open Access Journals (Sweden)

Z. Popović

2014-10-01

Full Text Available The service life of rails depends especially on the operational loads and speeds on the railway lines, as well as on the rail maintenance policy. There are multiple aspects of rail maintenance optimization. The following article considers optimisation of rail maintenance activities relating to rail head surface condition in order to reduce corrective work on track geometry, as well as to minimize the overall costs for track maintenance. The objects of this research are issues and challenges related to rail and track maintenance in curves on modern conventional railway lines for mixed traffic.

Service life and sustainable design methods: a case study

CSIR Research Space (South Africa)

Mc Duling, J

2008-05-01

Full Text Available The design life of hospitals normally varies between 50 to 60 years. This paper presents a case study of a major academic hospital that reached the end of its service life only 30 years after commissioning due to a combination of unsustainable...

Service life prediction of exterior plastics vision for the future

CERN Document Server

Martin, Jon; Chapin, J

2015-01-01

This book defines the current state-of-the-art for predicting the lifetime of plastics exposed to weather and outlines future research needed to advance this important field of study. Coverage includes progress in developing new science and test methods to determine how materials respond to weather exposure. This book is ideal for researchers and professionals working in the field of service life prediction. This book also: Examines numerous consensus standards that affect commercial products allowing readers to see the future of standards related to service life prediction Provides the scientific foundation for the latest commercially viable instruments Presents groundbreaking research, including the blueprint of a new test method that will significantly shorten the service life prediction process time Covers two of the latest verified predictive models, which demonstrate realized-potential to transform the field

Laser shock peening of steam turbine blade for enhanced service life

Indian Academy of Sciences (India)

2014-02-13

Feb 13, 2014 ... Fretting-fatigue is an important factor influencing service life of turbine blades. The present paper describes laser shock peening of potential crack nucleation site in the root region of steam turbine blade for its enhanced service life. The experimental study, performed with an in-house developed 2.5 J/7 ns ...

Applying Activity Based Costing (ABC) Method to Calculate Cost Price in Hospital and Remedy Services.

Science.gov (United States)

Rajabi, A; Dabiri, A

2012-01-01

Activity Based Costing (ABC) is one of the new methods began appearing as a costing methodology in the 1990's. It calculates cost price by determining the usage of resources. In this study, ABC method was used for calculating cost price of remedial services in hospitals. To apply ABC method, Shahid Faghihi Hospital was selected. First, hospital units were divided into three main departments: administrative, diagnostic, and hospitalized. Second, activity centers were defined by the activity analysis method. Third, costs of administrative activity centers were allocated into diagnostic and operational departments based on the cost driver. Finally, with regard to the usage of cost objectives from services of activity centers, the cost price of medical services was calculated. The cost price from ABC method significantly differs from tariff method. In addition, high amount of indirect costs in the hospital indicates that capacities of resources are not used properly. Cost price of remedial services with tariff method is not properly calculated when compared with ABC method. ABC calculates cost price by applying suitable mechanisms but tariff method is based on the fixed price. In addition, ABC represents useful information about the amount and combination of cost price services.

Probabilistic Design and Management of Sustainable Concrete Infrastructure Using Multi-Physics Service Life Models

DEFF Research Database (Denmark)

Lepech, Michael; Geiker, Mette; Michel, Alexander

This paper looks to address the grand challenge of integrating construction materials engineering research within a multi-scale, inter-disciplinary research and management framework for sustainable concrete infrastructure. The ultimate goal is to drive sustainability-focused innovation and adoption...... cycles in the broader architecture, engineering, construction (AEC) industry. Specifically, a probabilistic design framework for sustainable concrete infrastructure and a multi-physics service life model for reinforced concrete are presented as important points of integration for innovation between...... design, consists of concrete service life models and life cycle assessment (LCA) models. Both types of models (service life and LCA) are formulated stochastically so that the service life and time(s) to repair, as well as total sustainability impact, are described by a probability distribution. A central...

Actual service life prediction of building components

DEFF Research Database (Denmark)

Aagaard, Niels-Jørgen; Brandt, Erik; Hansen, Ernst Jan de Place

2014-01-01

In recent years, sustainability and life cycle cost in the construction industry have been given great attention in many countries due to the heavy climatic and environmental impact from this sector. In Denmark, a sustainability certification scheme for buildings has been developed including....... Finally, it is discussed how to adjust the model for practical purposes, and a scheme for actual service life for selected building components important for analysis of sustainability is linked. The schemes are now being implemented as basis for sustainability certification of new buildings in Denmark....

Student-Life Stress in Education and Health Service Majors

Science.gov (United States)

Zascavage, Victoria; Winterman, Kathleen G.; Buot, Max; Wies, Jennifer R.; Lyzinski, Natalie

2012-01-01

In order to better understand the effects of student-life stress on Education and Health Service majors (n = 195) at a private, religious, Midwestern university in the USA, we assessed student perception of overall stress level and physical stress level using the Student-life Stress Inventory. The targeted sample consisted of students with…

A Numerical Model for Estimation of Service Life of Tribological Systems of the Piston Engine

Directory of Open Access Journals (Sweden)

K. Gavrilov

2017-09-01

Full Text Available This article describes, develops and applies approach of the interaction of rough surfaces for one of the tasks of simulation of tribological systems of the piston engine. In this paper we described the general approach to building a model of interaction between rough surfaces, leading to the analysis of the Markov process. Given the initial data and the method of calculating the trajectory of movable elements on the lubricating layer, we determined the tribological parameters defining the service life of tribological systems of the piston engine on the example of crankshaft bearings.

9. Nuclear power plant service life prolongation

International Nuclear Information System (INIS)

Evropin, S.V.

1998-01-01

The problem of prolongation of nuclear power plant service life duration is discussed. A schematic diagram of the program developed in the course of activities dealing with NPP service time prolongation is shown and analyzed in details. It is shown that the basic moment when determining the strategy for NPP service time prolongation is the positive confirmation of the agreement between the NPP safety provisions and modern safety requirements. The other very important aspect of the problem is engineering substantiation of the measures assuring the reactor operation prolongation. The conclusion is made that available methods of recovering reactor materials properties, main components repair and replacement, the modern techniques for nondestructive testing of metals and NPP pipelines, as well as the developed approaches to reactor facility safety improvements make the prolongation of the Russian NPP service lifetimes possible from engineering viewpoint and economically desirable

Evaluation of HEPA filter service life

International Nuclear Information System (INIS)

Fretthold, J.K.; Stithem, A.R.

1997-01-01

Rocky Flats Environmental Technology Site (RFETS), has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and potential accidents. This report summarizes the results of destructive and non-destructive tests on HEPA filters obtained from a wide variety of ages and service conditions. These tests were performed to determine an acceptable service life criteria for HEPA filters used at Rocky Flats Environmental Technology Site (RFETS). A total of 140 filters of various ages (1972 to 1996) and service history (new, aged unused, used) were tested. For the purpose of this report, filter age from manufacture date/initial test date to the current sample date was used, as opposed to the actual time a filter was installed in an operating system

Calculation-experimental method justifies the life of wagons

Directory of Open Access Journals (Sweden)

Валерія Сергіївна Воропай

2015-11-01

Full Text Available The article proposed a method to evaluate the technical state of tank wagons operating in chemical industry. An algorithm for evaluation the technical state of tank wagons was developed, that makes it possible on the basis of diagnosis and analysis of current condition to justify a further period of operation. The complex of works on testing the tanks and mathematical models for calculations of the design strength and reliability were proposed. The article is devoted to solving the problem of effective exploitation of the working fleet of tank wagons. Opportunities for further exploitation of cars, the complex of works on the assessment of their technical state and the calculation of the resources have been proposed in the article. Engineering research of the chemical industries park has reduced the shortage of the rolling stock for transportation of ammonia. The analysis of the chassis numerous faults and the main elements of tank wagons supporting structure after 20 years of exploitation was made. The algorithm of determining the residual life of the specialized tank wagons operating in an industrial plant has been proposed. The procedure for resource conservation of tank wagons carrying cargo under high pressure was first proposed. The improved procedure for identifying residual life proposed in the article has both theoretical and practical importance

Tools for in service monitoring and testing of riser to prevent failure and extend service life

Energy Technology Data Exchange (ETDEWEB)

Ward, Haakon; Bondevik, Jon Olav; Skjerve, Haavard; Tveit, Oeyvind [SeaFlex AS, Asker (Norway)

2005-07-01

Exploration and development of new oil and gas fields is heavily dependant on use of flexible pipes and many field developments would not have been possible without them. The number of flexible risers in service is constantly increasing since relatively few offshore projects have reached the estimated operational life and the operational lifetime of several fields in-service has been extended due to new and improved technology. Many risers have been in service over a large number of years. Some risers have been operated under demanding conditions such as severe dynamic loads, high pressure and temperatures. One may in some cases find that risers actually have shorter service life than estimated in the design phase due to the severe operational conditions. In order to extend the use of the riser, some risers may have to be modified and re-terminated and prepared for a new and less demanding application. In order to operate risers safely, it is important to re-assess the fatigue life in order to prevent potential riser failure. The operator should implement methods and tools for in-service monitoring and testing. This paper addresses efficient and reliable methods and tools for monitoring of critical operational parameters as well as in-service riser testing. A brief description of structural failure modes will also be given in order to understand how to interpret test results in view of potential failure modes. (author)

Life assessment of gas turbine blades after long term service

Energy Technology Data Exchange (ETDEWEB)

Auerkari, Pertti; Salonen, Jorma [VTT, Espoo (Finland); Maekinen, Sari [Helsingin Energia, Helsinki (Finland); Karvonen, Ikka; Tanttari, Heikki [Lappeenrannan Laempoevoima, Lappeenranta (Finland); Kangas, Pekka [Neste Oil, Kilpilahti (Finland); Scholz, Alfred [Technische Univ. Darmstadt (Germany); Vacchieri, Erica [Ansaldo Richerche, Genoa (Italy)

2010-07-01

Turbine blade samples from three land based gas turbines have been subjected to systematic condition and life assessment after long term service (88000 - 109000 equivalent operating hours, eoh), when approaching the nominal or suggested life limits. The blades represent different machine types, materials and design generations, and uncooled blading outside the hottest front end of the turbine, i.e. blades with relatively large size and considerable expected life. For a reasonable assessment, a range of damage mechanisms need to be addressed and evaluated for the impact in the residual life. The results suggested significant additional safe life for all three blade sets. In some cases this could warrant yet another life cycle comparable to that of new blades, even after approaching the nominal end of life in terms of recommended equivalent operating hours. This is thought to be partly because of base load combined cycle operation and natural gas fuel, or modest operational loading if the design also accounted for more intensive cycling operation and more corrosive oil firing. In any case, long term life extension is only appropriate if not intervened by events of overloading, overheating or other sudden events such as foreign object damage (FOD), and if supported by the regular inspection and maintenance program to control in-service damage. Condition based assessment therefore remains an important part of the blade life management after the decision of accepted life extension. (orig.)

Reliability and service life of wood structures and buildings

Directory of Open Access Journals (Sweden)

Zdeňka Havířová

2005-01-01

Full Text Available Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1, energy savings and thermal protection (ER6 and hygiene, health and environment protection (ER3. To ensure the reliability of constructions and buildings for the period of their supposed service life a more profound analysis of constructions is necessary from the aspect of a global thermal/technical evaluation.

BioCatalogue: a universal catalogue of web services for the life sciences.

Science.gov (United States)

Bhagat, Jiten; Tanoh, Franck; Nzuobontane, Eric; Laurent, Thomas; Orlowski, Jerzy; Roos, Marco; Wolstencroft, Katy; Aleksejevs, Sergejs; Stevens, Robert; Pettifer, Steve; Lopez, Rodrigo; Goble, Carole A

2010-07-01

The use of Web Services to enable programmatic access to on-line bioinformatics is becoming increasingly important in the Life Sciences. However, their number, distribution and the variable quality of their documentation can make their discovery and subsequent use difficult. A Web Services registry with information on available services will help to bring together service providers and their users. The BioCatalogue (http://www.biocatalogue.org/) provides a common interface for registering, browsing and annotating Web Services to the Life Science community. Services in the BioCatalogue can be described and searched in multiple ways based upon their technical types, bioinformatics categories, user tags, service providers or data inputs and outputs. They are also subject to constant monitoring, allowing the identification of service problems and changes and the filtering-out of unavailable or unreliable resources. The system is accessible via a human-readable 'Web 2.0'-style interface and a programmatic Web Service interface. The BioCatalogue follows a community approach in which all services can be registered, browsed and incrementally documented with annotations by any member of the scientific community.

Prediction of the Service Life of a Reinforced Concrete Column under Chloride Environment

Directory of Open Access Journals (Sweden)

Mohammad K. Alkam

2015-01-01

Full Text Available In the present investigation, service life of a reinforced concrete column exposed to chloride environment has been predicted. This study has been based on numerical simulation of chloride ion diffusion in a concrete column during its anticipated life span. The simulation process has included the concrete cover replacement whenever chloride ion concentration has reached the critical threshold value at the reinforcement surface. Repair scheduling of the concrete column under consideration has been discussed. Effects of the concrete cover thickness and the water cement ratio on the service life of the concrete column at hand have been presented. A new approach for arranging locations of reinforcement steel bars has been introduced. This approach is intended to prolong the service life of the concrete column under consideration against chloride induced corrosion.

Life Cycle Characteristics of Small Professional Service Firms

NARCIS (Netherlands)

Masurel, E.; van Montfort, C.A.G.M.

2006-01-01

Our study of professional services firms clearly revealed that firms change over the course of their life cycles. During the first three stages, diversification in sales, the differentiation in labor force, and the level of labor productivity increase. In the last stage, diversification in sales,

Predicting the service life of connecting rod and main bearings, taking into account different engine loads. Final report; Lebensdauervorhersage fuer Pleuel- und Hauptlager unter Beruecksichtigung unterschiedlicher Motorlastkollektive. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Berkowitz, B.; Lueneburg, B.; Liu, J.

1994-12-31

Connecting rod and main bearings of internal combustion engines are among the most heavily stressed components in modern engines. It was found that these engine components are increasingly reaching the limits of their strength and therefore become the components limiting engine life. However, there is no known process which makes a calculated prediction of the service life of modern connecting rod and main bearings possible, taking into account various engine loads. In this research project, a new concept for the calculated prediction of the service life of non-static highly loaded radial sliding bearings is worked out. The basis is a process of calculation which realistically determines the pressure and gap course in highly loaded sliding bearings. Apart from the viscosity depending on pressure and temperature, the elastic deformations of the system sliding bearing/conn rod are also taken into account. Calculations are done for different operating points for a complete cycle of a four stroke Diesel engine (Daimler-Benz OM 364 LA). The results are compared with the present conventional process of calculation and the effects which occur are discussed. Based on the elasto-hydrodynamic calculation, a method of calculating the service life of non-statically loaded sliding bearings, taking into account various motor loads, is worked out. (orig./HW) [Deutsch] Pleuel- und Hauptlager von Verbrennungskraftmaschinen zaehlen mit zu den spezifisch am hoechsten beanspruchten Bauteilen in modernen Motoren. Es hat sich gezeigt, dass vor allem diese Maschinenelemente zunehmend an die Grenzen ihrer Belastbarkeit stossen und so zum lebensdauerbegrenzenden Bauteil werden. Es ist jedoch kein Verfahren bekannt, das eine rechnerische Lebensdauervorhersage moderner Pleuel- und Hauptlager unter Beruecksichtigung unterschiedlicher Motorlastkollektive ermoeglicht. Im vorliegenden Forschungsvorhaben wird daher ein neuartiges Konzept zur rechnerischen Lebensdauervorhersage von instationaeren

A Liquid work-life under public service contracting

DEFF Research Database (Denmark)

Lindholst, Christian

for staff, however, are only poorly understood in current theory and research on public service contracting through partial concepts and a tendency to focus merely on negative outcomes. Against this shortfall, the aim in this paper is to build a conceptually and empirically richer and more authentic account......A part of the reality behind public service contracting in Denmark as well as in many other countries is that a growing number of people are employed in uncertain and temporary conditions and relations in what can be characterized as ‘liquidized’ work-lives. This reality and its consequences...... of staffs’ work-life under public service contracting. The paper relies empirically on focus group interviews in two cases of staff transfers in public service contracting with different levels of liquefaction. it is found that staff transfer is a composite experience for staff with differential outcomes...

Automatically exposing OpenLifeData via SADI semantic Web Services.

Science.gov (United States)

González, Alejandro Rodríguez; Callahan, Alison; Cruz-Toledo, José; Garcia, Adrian; Egaña Aranguren, Mikel; Dumontier, Michel; Wilkinson, Mark D

2014-01-01

Two distinct trends are emerging with respect to how data is shared, collected, and analyzed within the bioinformatics community. First, Linked Data, exposed as SPARQL endpoints, promises to make data easier to collect and integrate by moving towards the harmonization of data syntax, descriptive vocabularies, and identifiers, as well as providing a standardized mechanism for data access. Second, Web Services, often linked together into workflows, normalize data access and create transparent, reproducible scientific methodologies that can, in principle, be re-used and customized to suit new scientific questions. Constructing queries that traverse semantically-rich Linked Data requires substantial expertise, yet traditional RESTful or SOAP Web Services cannot adequately describe the content of a SPARQL endpoint. We propose that content-driven Semantic Web Services can enable facile discovery of Linked Data, independent of their location. We use a well-curated Linked Dataset - OpenLifeData - and utilize its descriptive metadata to automatically configure a series of more than 22,000 Semantic Web Services that expose all of its content via the SADI set of design principles. The OpenLifeData SADI services are discoverable via queries to the SHARE registry and easy to integrate into new or existing bioinformatics workflows and analytical pipelines. We demonstrate the utility of this system through comparison of Web Service-mediated data access with traditional SPARQL, and note that this approach not only simplifies data retrieval, but simultaneously provides protection against resource-intensive queries. We show, through a variety of different clients and examples of varying complexity, that data from the myriad OpenLifeData can be recovered without any need for prior-knowledge of the content or structure of the SPARQL endpoints. We also demonstrate that, via clients such as SHARE, the complexity of federated SPARQL queries is dramatically reduced.

International Space Station Bacteria Filter Element Service Life Evaluation

Science.gov (United States)

Perry, J. L.

2005-01-01

The International Space Station (ISS) uses high-efficiency particulate air filters to remove particulate matter from the cabin atmosphere. Known as bacteria filter elements (BFEs), there are 13 elements deployed on board the ISS's U.S. segment in the flight 4R assembly level. The preflight service life prediction of 1 yr for the BFEs is based upon engineering analysis of data collected during developmental testing that used a synthetic dust challenge. While this challenge is considered reasonable and conservative from a design perspective, an understanding of the actual filter loading is required to best manage the critical ISS program resources. Testing was conducted on BFEs returned from the ISS to refine the service life prediction. Results from this testing and implications to ISS resource management are provided.

Accounting for ecosystem services in life cycle assessment, Part I: a critical review.

Science.gov (United States)

Zhang, Yi; Singh, Shweta; Bakshi, Bhavik R

2010-04-01

If life cycle oriented methods are to encourage sustainable development, they must account for the role of ecosystem goods and services, since these form the basis of planetary activities and human well-being. This article reviews methods that are relevant to accounting for the role of nature and that could be integrated into life cycle oriented approaches. These include methods developed by ecologists for quantifying ecosystem services, by ecological economists for monetary valuation, and life cycle methods such as conventional life cycle assessment, thermodynamic methods for resource accounting such as exergy and emergy analysis, variations of the ecological footprint approach, and human appropriation of net primary productivity. Each approach has its strengths: economic methods are able to quantify the value of cultural services; LCA considers emissions and assesses their impact; emergy accounts for supporting services in terms of cumulative exergy; and ecological footprint is intuitively appealing and considers biocapacity. However, no method is able to consider all the ecosystem services, often due to the desire to aggregate all resources in terms of a single unit. This review shows that comprehensive accounting for ecosystem services in LCA requires greater integration among existing methods, hierarchical schemes for interpreting results via multiple levels of aggregation, and greater understanding of the role of ecosystems in supporting human activities. These present many research opportunities that must be addressed to meet the challenges of sustainability.

Caregivers' quality of life and quality of services for children with cancer: a review from iran.

Science.gov (United States)

Sajjadi, Homeira; Vameghi, Meroe; Ghazinour, Mehdi; Khodaeiardekani, Mohammadreza

2013-03-04

Caregivers of cancer patients are exposed to different types of psychosocial stress which influence their quality of life. The purposes of this study were to assess quality of life in caregivers of children with cancer and to investigate the relationship between the caregivers' quality of life and quality of services in the social work section. 125 caregivers were recruited. Quality of life was measured by the Iranian version of the WHOQOL-BREF questionnaire and data concerning service quality were obtained from the Iranian version of the SERVQUAL questionnaire. Scores in physical health, psychological status and environmental conditions for caregivers of children with cancer were significantly lower than the general population. There was a negative correlation between the tangible domain of SERVQUAL and the psychological status and environmental conditions of quality of life. The tangible dimension was the only aspect of service quality to predict caregivers' quality of life regarding psychological status and environmental conditions. Caregivers of children with a disease are care consumers and, like all consumers, they expect good service. Delivering high quality services consistently is difficult but profitable for a service organization. In other words, trying to deliver more appropriate services than patients expect to receive from their social work care is one of the most reliable ways to promote caregivers' satisfaction and quality of life.

Caregivers’ Quality of Life and Quality of Services for Children with Cancer: A Review from Iran

Science.gov (United States)

Sajjadi, Homeira; Vameghi, Meroe; Ghazinour, Mehdi; KhodaeiArdakani, Mohammadreza

2013-01-01

Objective: Caregivers of cancer patients are exposed to different types of psychosocial stress which influence their quality of life. The purposes of this study were to assess quality of life in caregivers of children with cancer and to investigate the relationship between the caregivers’ quality of life and quality of services in the social work section. Method: 125 caregivers were recruited. Quality of life was measured by the Iranian version of the WHOQOL-BREF questionnaire and data concerning service quality were obtained from the Iranian version of the SERVQUAL questionnaire. Findings: Scores in physical health, psychological status and environmental conditions for caregivers of children with cancer were significantly lower than the general population. There was a negative correlation between the tangible domain of SERVQUAL and the psychological status and environmental conditions of quality of life. The tangible dimension was the only aspect of service quality to predict caregivers’ quality of life regarding psychological status and environmental conditions. Conclusion: Caregivers of children with a disease are care consumers and, like all consumers, they expect good service. Delivering high quality services consistently is difficult but profitable for a service organization. In other words, trying to deliver more appropriate services than patients expect to receive from their social work care is one of the most reliable ways to promote caregivers’ satisfaction and quality of life. PMID:23618487

In-Service Aircraft Transmission Life Modeling for Improved Flight Safety, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — It is proposed to develop an accurate, in-service transmission life-estimation system for the prediction of remaining component and system life for a helicopter...

In-Service Aircraft Transmission Life Modeling for Improved Flight Safety, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — It is proposed to develop an accurate, in-service transmission life-use estimation system for the prediction of remaining component and system life for a helicopter...

Effects of Crack and Climate Change on Service Life of Concrete Subjected to Carbonation

Directory of Open Access Journals (Sweden)

Xiao-Yong Wang

2018-04-01

Full Text Available Carbonation is among the primary reasons for the initiation of the corrosion of steel rebar in reinforced concrete (RC structures. Due to structural loading effects and environmental actions, inevitable cracks have frequently occurred in concrete structures since the early ages. Additionally, climate change, which entails increases in CO2 concentration and environmental temperature, will also accelerate the carbonation of concrete. This article presents an analytical way of predicting the service life of cracked concrete structures considering influences of carbonation and climate change. First, using a hydration model, the quantity of carbonatable materials and concrete porosity were calculated. Carbonation depth was evaluated considering properties of concrete materials and environmental conditions. Second, the influence of cracks on CO2 diffusivity was examined. Carbonation depth for cracked concrete was evaluated using equivalent CO2 diffusivity. The effects of climate change, for example, growing CO2 concentration and environmental temperature, were considered using different schemes of carbonation models. Third, different climate change scenarios (such as Representative Concentration Pathways (RCP 2.6, RCP 4.5, RCP 8.5 and upper 90% confidence interval of RCP 8.5 and time slices (such as 2000 and 2050 were used for case studies. By utilizing the Monte Carlo method, the influences of various climate change scenarios on the service life loss of concrete structures were highlighted.

Experimental methods for consideration of concrete cracking in service life design

DEFF Research Database (Denmark)

Pease, Bradley Justin; Geiker, Mette Rica; Stang, Henrik

2011-01-01

.e., concrete with cracks at start of service) and to more accurately estimate time-to-cracking due to reinforcement corrosion based on experimental measurements. This paper presents two non-destructive measurement techniques with potential to quantify the impact concrete cracks have on service life...

Perceptions of Pre-Service Teachers on Student Burnout, Occupational Anxiety and Faculty Life Quality

Science.gov (United States)

Türkoglu, Muhammet Emin; Cansoy, Ramazan

2017-01-01

Perceptions of pre-service teachers on burnout, occupational anxiety and faculty life quality were investigated in this research. The research group consisted of 461 pre-service teachers in total studying at Afyon Kocatepe University faculty of education. "Maslach Burnout Inventory-Student Form," "Faculty Life Quality Scale"…

PREMIUMS CALCULATION FOR LIFE INSURANCE

Directory of Open Access Journals (Sweden)

ANA PREDA

2012-10-01

Full Text Available The paper presents the techniques and the formulas used on international practice for establishing the premiums for a life policy. The formulas are generally based on a series of indicators named mortality indicators which mainly point out the insured survival probability, the death probability and life expectancy at certain age. I determined, using a case study, the unique net premium, the annual net premium for a survival insurance, whole life insurance and mixed life insurance.

Optimization of NPP performance and service life in a competitive electricity market

International Nuclear Information System (INIS)

Gueorguiev, B.; Spielgelberg - Planner, R.

2000-01-01

This paper discusses how the competitive electricity market has influenced nuclear power plant operations, with a focus on optimisation of NPP performance and plant service life, and how the IAEA programme has addressed some of this issues. The definitions of Plant Life, Operational Life, Design Life and Periodical Safety Reviews are developed in the paper in order to differentiate between the terms and to show the significance in terms of Plant Life Management

Service life optimization and extension of structures

International Nuclear Information System (INIS)

Hornet, P.; Venturini, V.; Persoz, M.; Debost-Eymard, I.; Meister, E.

1998-01-01

In order to justify its power plants safety which conditions their service life, EDF uses a deterministic approach until now. A probabilistic approach also exists which has a decisive advantage because it quantifies risk and makes it possible to optimize maintenance volume. The application of this approach is illustrated on the case of a reactor vessel; a coupling between the Code Aster tool and a probabilistic analysis software is necessary. (authors)

Threats Management Throughout the Software Service Life-Cycle

Directory of Open Access Journals (Sweden)

Erlend Andreas Gjære

2014-04-01

Full Text Available Software services are inevitably exposed to a fluctuating threat picture. Unfortunately, not all threats can be handled only with preventive measures during design and development, but also require adaptive mitigations at runtime. In this paper we describe an approach where we model composite services and threats together, which allows us to create preventive measures at design-time. At runtime, our specification also allows the service runtime environment (SRE to receive alerts about active threats that we have not handled, and react to these automatically through adaptation of the composite service. A goal-oriented security requirements modelling tool is used to model business-level threats and analyse how they may impact goals. A process flow modelling tool, utilising Business Process Model and Notation (BPMN and standard error boundary events, allows us to define how threats should be responded to during service execution on a technical level. Throughout the software life-cycle, we maintain threats in a centralised threat repository. Re-use of these threats extends further into monitoring alerts being distributed through a cloud-based messaging service. To demonstrate our approach in practice, we have developed a proof-of-concept service for the Air Traffic Management (ATM domain. In addition to the design-time activities, we show how this composite service duly adapts itself when a service component is exposed to a threat at runtime.

Finite element method used in strength calculations of nuclear power plant pressure vessels

International Nuclear Information System (INIS)

Hanulak, E.

1987-01-01

A software system based on the use of the finite element method in linear and nonlinear elastomechanics was developed for assessing the strength and service life of steam generators and pressurizers for WWER type nuclear power plants. The individual programs are briefly described. They are written in FORTRAN IV, some modules are in ASSEMBLER. Programs EGUSAP, NEANKO, ROSYNA are designed for the calculation of stress and deformation, programs ROSYNA, NEANKO and NTEPLO are used for the calculation of temperature fields. Programs SPOJ and STATES are used for assessing the strength and service life of screw joints and other nodes of the WWER-440 type steam generators and pressurizers. (Z.M.)

Calculation of low-cycle fatigue in accordance with the national standard and strength codes

Science.gov (United States)

Kontorovich, T. S.; Radin, Yu. A.

2017-08-01

Over the most recent 15 years, the Russian power industry has largely relied on imported equipment manufactured in compliance with foreign standards and procedures. This inevitably necessitates their harmonization with the regulatory documents of the Russian Federation, which include calculations of strength, low cycle fatigue, and assessment of the equipment service life. An important regulatory document providing the engineering foundation for cyclic strength and life assessment for high-load components of the boiler and steamline of a water/steam circuit is RD 10-249-98:2000: Standard Method of Strength Estimation in Stationary Boilers and Steam and Water Piping. In January 2015, the National Standard of the Russian Federation 12952-3:2001 was introduced regulating the issues of design and calculation of the pressure parts of water-tube boilers and auxiliary installations. Thus, there appeared to be two documents simultaneously valid in the same energy field and using different methods for calculating the low-cycle fatigue strength, which leads to different results. In this connection, the current situation can lead to incorrect ideas about the cyclic strength and the service life of high-temperature boiler parts. The article shows that the results of calculations performed in accordance with GOST R 55682.3-2013/EN 12952-3: 2001 are less conservative than the results of the standard RD 10-249-98. Since the calculation of the expected service life of boiler parts should use GOST R 55682.3-2013/EN 12952-3: 2001, it becomes necessary to establish the applicability scope of each of the above documents.

Service Life and Maintenance Modelling of Reinforced Concrete Bridge Decks

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

Recent research in the area of assessment and maintenance of reinforced concrete bridge decks is presented in this paper. Three definitions of service lifetime are introduced and the difficult problem of assessing the service life is discussed. A stochastic modelling of corrosion and corrosion...... cracking is introduced and the site dependency of corrosion is stressed. Finally, a recently developed optimal repair strategy for bridges is briefly explained....

Service Life Extension of the Propulsion System of Long-Term Manned Orbital Stations

Science.gov (United States)

Kamath, Ulhas; Kuznetsov, Sergei; Spencer, Victor

2014-01-01

One of the critical non-replaceable systems of a long-term manned orbital station is the propulsion system. Since the propulsion system operates beginning with the launch of station elements into orbit, its service life determines the service life of the station overall. Weighing almost a million pounds, the International Space Station (ISS) is about four times as large as the Russian space station Mir and about five times as large as the U.S. Skylab. Constructed over a span of more than a decade with the help of over 100 space flights, elements and modules of the ISS provide more research space than any spacecraft ever built. Originally envisaged for a service life of fifteen years, this Earth orbiting laboratory has been in orbit since 1998. Some elements that have been launched later in the assembly sequence were not yet built when the first elements were placed in orbit. Hence, some of the early modules that were launched at the inception of the program were already nearing the end of their design life when the ISS was finally ready and operational. To maximize the return on global investments on ISS, it is essential for the valuable research on ISS to continue as long as the station can be sustained safely in orbit. This paper describes the work performed to extend the service life of the ISS propulsion system. A system comprises of many components with varying failure rates. Reliability of a system is the probability that it will perform its intended function under encountered operating conditions, for a specified period of time. As we are interested in finding out how reliable a system would be in the future, reliability expressed as a function of time provides valuable insight. In a hypothetical bathtub shaped failure rate curve, the failure rate, defined as the number of failures per unit time that a currently healthy component will suffer in a given future time interval, decreases during infant-mortality period, stays nearly constant during the service

Service life assessment of timber highway bridges in USA climate zones

Science.gov (United States)

James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

2014-01-01

As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

Simulating the service life performance of an inspected group of jacket-type structures

DEFF Research Database (Denmark)

Schneider, Ronald; Thöns, Sebastian; Rogge, Andreas

2017-01-01

and risk. We intend to adopt this approach to optimize inspection, monitoring and repair activities for offshore wind park support structures. As a first step, we simulate – in analogy to an offshore wind park – the service life performance of an inspected group of jacket-type frames. The performance......A novel method for risk-based optimization of inspection and repair strategies for deteriorating structural systems has recently been proposed. The method defines heuristics at the system level to reduce the number of possible strategies. For each defined strategy, it computes the updated system...... failure probability conditional on simulated inspection and repair histories, and evaluates the associated costs and risk. The expected total service life costs and risk for a strategy are finally determined using Monte Carlo simulation. The optimal strategy minimizes the expected total service life costs...

Effect of home care service on the quality of life in patients with gynecological cancer.

Science.gov (United States)

Aktas, Demet; Terzioglu, Fusun

2015-01-01

The purpose of the research was to determine the effect of home care service on the quality of life in patients with gynecological cancer. This randomized case control study was carried out in a womans hospital between September 2011 and February 2012. Women undergoing gynecological cancer treatment were separated into intervention and control groups, of 35 patients each. The intervention group was provided with nursing care service through hospital and home visits (1st, 12th weeks) within the framework of a specifically developed nursing care plan. The control group was monitored without any intervention through the hospital routine protocols (1st, 12th weeks). Data were collected using An Interview Form, Home Visit Monitoring Form and Quality of Life Scale/Cancer Survivors. Effects of home care service on the quality of life in gynecological cancer patients were investigated using chi-square tests, McNemar's test, independent t-test and ANOVA. This study found that the intervention group receiving home care service had a moderately high quality of life (average mean: 6.01±0.64), while the control group had comparatively lower quality (average mean: 4.35±0.79) within the 12 week post- discharge period (phome care services to be efficient in improving the quality of life in patients with gynecological cancer.

Effective technical service in the life cycle of heavy dumpers

Directory of Open Access Journals (Sweden)

Михайло Валерійович Помазков

2016-11-01

Full Text Available A comparative analysis of the known systems of technical reliability of heavy dumpers functionality has been made. It has been stated that the previously proposed methods to determine the optimal service life of heavy-duty dumpers are not effective enough and do not take into account the whole range of factors specific to the operation of heavy dumpers in the current economic realities of industrial enterprises. Based on the analysis results, a mechanism of determining the optimal service life of heavy-duty dumpers and their constituent technical systems ensuring the operational reliability of heavy-duty dumpers has been offered. The article takes into account the analysis of resource factors, general description of system logistic tasks, the main provisions of serviceability, the resource forming in route charts at ore mining and metallurgical enterprises, the use of theoretical developments in practice. Heavy dumpers generalized description modelling shown in the article, the principle of resource use by using interchangable work at different intensity routes has received confirmation in the dumpers’ work schedule

Influence of Superheated Steam Temperature Regulation Quality on Service Life of Boiler Steam Super-Heater Metal

Directory of Open Access Journals (Sweden)

G. T. Kulakov

2009-01-01

Full Text Available The paper investigates influence of change in quality of superheated steam temperature regulations on service life of super-heater metal. А dependence between metal service life and dispersion value for different steel grades has been determined in the paper. Numerical values pertaining to increase of super-heater metal service life in case of transferring from manual regulation to standard system of automatic regulation (SAR have been determined and in case of transferring from standard SAR to improved SAR. The analysis of tabular data and plotted dependencies makes it possible to conclude that any change in conditions of convection super-heater metal work due to better quality of the regulation leads to essential increase of time period which is left till the completion of the service life of a super-heater heating surface.

Impact of Child Life Services on Children and Families Admitted to Start the Ketogenic Diet.

Science.gov (United States)

Kossoff, Eric H; Sutter, Lindsay; Doerrer, Sarah C; Haney, Courtney A; Turner, Zahava

2017-08-01

Traditionally the ketogenic diet is started as an inpatient admission to the hospital. Starting in January 2015, child life services were made formally available during ketogenic diet admissions to help families cope. One-page surveys were then provided to 15 parents on the day of discharge and again after 3 months. Every family believed that the child life services were helpful. Children who were developmentally appropriate/mildly delayed had higher parent-reported anxiety scores than those who were moderate to severely delayed (4.4 vs 1.0, P = .02). At 3 months, child life services were deemed very helpful for the parents (mean score: 8.9, range: 5-10), and were more helpful for the parent than the child (mean 6.2, range 1-10, P = .047). One of the most helpful services was a prior phone call to parents 1 week prior. In this small pilot study, child life involvement during the start of the ketogenic diet was highly useful.

Measuring Service-Mindedness and Its Relationship with Spirituality and Life Satisfaction

Science.gov (United States)

Pashak, Travis J.; Laughter, Tim C.

2012-01-01

A self-report measure of service-mindedness was designed in order to fill in a gap in the literature and evaluate a potential link between spirituality and satisfaction with life. A sample of 133 undergraduate students at a Catholic university in the Mid-west completed the Service-Mindedness Scale (SMS), along with the Spiritual Involvement and…

Health-Related Quality of Life of Rural Clients Seeking Telepsychology Services

Directory of Open Access Journals (Sweden)

Kevin R. Tarlow

2014-01-01

Full Text Available Sixty million US residents live in rural areas, but health policies and interventions developed from an urban mindset often fail to address the significant barriers to health experienced by these local communities. Telepsychology, or psychological services delivered by distance via technology, is an emerging treatment modality with special implications for underserved rural areas. This study found that a sample of rural residents seeking telepsychology services (n=94 had low health-related quality of life (HRQOL, often due to cooccurring physical and mental health diagnoses including high rates of depression. However, a brief telepsychology treatment delivered to rural clients (n=40 was associated with an improvement in mental health-related quality of life (d = 0.70,  P<.001. These results indicate that despite the complex health needs of these underserved communities, telepsychology interventions may help offset the disparities in health service access in rural areas.

Pre-Service Teachers in Second Life: Potentials of Simulations

Science.gov (United States)

Teoh, Jase

2012-01-01

An in-depth qualitative study with nine secondary pre-service teachers from an undergraduate "Language and Literacy" class was conducted to examine the potential of simulation using Second Life (SL) in teacher education. Games and simulations were operationally defined in the broadest sense to distinguish key characteristics between…

Extending the Service Life of Pavements

Science.gov (United States)

Gschwendt, Ivan

2018-03-01

The cost of road construction and expenditures on the maintenance of pavements, i.e., their whole life cost, represents a lot of money. The paper describes a procedure for a pavement management system with degradation models and estimates the length of time for the rehabilitation of an asphalt pavement. Using a theory of pavement mechanics, we calculated the stresses and strains on the layers of two pavement models. High modulus asphalt concrete, an asphalt mix with a high binder content, and an asphalt mix with binder modifications are new road building materials. Prolonging the time for the rehabilitation of pavements is possible.

The development of socially responsible life-sciences teachers through community service learning.

Directory of Open Access Journals (Sweden)

J.J. Rian de Villiers

2012-03-01

Full Text Available In South Africa, polices in higher education are urging tertiary institutions to produce graduates who are socially responsible citizens. One method of achieving this is through service-learning initiatives. Zoos as community partners can provide exciting educational opportunities for students to do animal behaviour studies and to develop their social responsibility. A sample of 58 preservice life-sciences teachers from a South African university completed a questionnaire on their animal behaviour studies. This study sought to determine how animal behaviour studies could successfully be incorporated as a community service-learning project in a zoo setting, what the educational value of these studies was and what the benefits were of incorporating this community service-learning component in the life-sciences course. The incorporation of the service-learning component into the zoology course led to the students’ personal and professional development, knowledge about themselves, sensitivity to cultural diversity, civic responsibility and insights into the ways in which communities operate. For a successful service-learning project, lectures, students and community partners should all have a sense of engagement. A number of suggestions are made to improve the incorporation of this service-learning component into the existing zoology course.

A Review of Perspectives on Frameworks for Ethical Theories in Public Service Life

Directory of Open Access Journals (Sweden)

Deoram Sing

2016-06-01

Full Text Available Given the dynamic and changing interwoven and intertwined internal and external environments impacting on public service life, establishing and promoting a proper ethical foundation in public service life, has in itself emerged as a profound and daunting challenge, a worldwide phenomenon. The role of frameworks for ethical theories  –  such as teleological, deontological, virtue-based, and learning and growth, is crucial to dealing with this challenge. It is the view of the author that a keen grasp and application of the various frameworks, as well as their various components, could project their viewing and that of their components, not in isolation, but in an interconnected and intertwined manner. This could enhance the clarification of ethical and moral alternatives, as well as facilitate the spreading and diffusion of techniques for ethical reasoning and moral awareness, throughout public service life.

Custom auroral electrojet indices calculated by using MANGO value-added services

Science.gov (United States)

Bargatze, L. F.; Moore, W. B.; King, T. A.

2009-12-01

A set of computational routines called MANGO, Magnetogram Analysis for the Network of Geophysical Observatories, is utilized to calculate customized versions of the auroral electrojet indices, AE, AL, and AU. MANGO is part of an effort to enhance data services available to users of the Heliophysics VxOs, specifically for the Virtual Magnetospheric Observatory (VMO). The MANGO value-added service package is composed of a set of IDL routines that decompose ground magnetic field observations to isolate secular, diurnal, and disturbance variations of magnetic field disturbance, station-by-station. Each MANGO subroutine has been written in modular fashion to allow "plug and play"-style flexibility and each has been designed to account for failure modes and noisy data so that the programs will run to completion producing as much derived data as possible. The capabilities of the MANGO service package will be demonstrated through their application to the study of auroral electrojet current flow during magnetic substorms. Traditionally, the AE indices are calculated by using data from about twelve ground stations located at northern auroral zone latitudes spread longitudinally around the world. Magnetogram data are corrected for secular variation prior to calculating the standard version of the indices but the data are not corrected for diurnal variations. A custom version of the AE indices will be created by using the MANGO routines including a step to subtract diurnal curves from the magnetic field data at each station. The custom AE indices provide more accurate measures of auroral electrojet activity due to isolation of the sunstorm electrojet magnetic field signiture. The improvements in the accuracy of the custom AE indices over the tradition indices are largest during the northern hemisphere summer when the range of diurnal variation reaches its maximum.

METHODS AND RESEARCH CONCERNING SERVICE LIFE EXTENSION OF SUPORTING STRUCTURES OF TRACTION ROLLING STOCK FOR INDUSTRIAL TRANSPORT

Directory of Open Access Journals (Sweden)

O. M. Bondarev

2014-04-01

Full Text Available Purpose. The purpose of work is scientifically grounded introduction of the acquired techniques into works for service life extension of the traction and motor rolling stock for industrial transport. Methodology. To achieve the purpose it was analyzed the acquired techniques for service life extension of the traction and motor rolling stock for mainline transport. The acquired techniques during solution of problems concerning the service life extension of rolling stock units were adapted to the locomotives TGM6A and traction aggregates OPE1. Findings. On the basis of experimental and theoretical complex of studies some results were obtained. They gave the ground to determine the possibility of acquired techniques use when solving the problems on service life extension of rolling stock units concerning locomotives TGM6A and traction aggregates OPE1. Originality. On the basis of conducted experimental and theoretical studies scientific maintenance of the works providing extension of service life of traction and motor units of industrial rolling stock was executed. Practical value. Technical solutions and measures, which have to be carried out during operation within the prolonged appointed service life of traction and motor units of industrial rolling stock enterprises using locomotives and traction aggregates to provide the basic technological cycles were developed.

Determining Service Life of Respirator Cartridges Using a Simple and Practical Method: Case Study in a Car Manufacturing Industry

Directory of Open Access Journals (Sweden)

A.M Rashidi

2012-01-01

Full Text Available Background and aims: For ensuring about proper performance of air-purifying respirators in providing protection against workplace contaminants, it is necessary to change the respirator cartridges before the end of their service life. The aim of this study was determination of service life of organic vapor cartridges using a simple and practical method in a spray painting booth of a car manufacturing industry.   Methods: NIOSH MultiVapor software was used for estimating service life of respirator cartridges based on workplace conditions and cartridge specifications. Efficiency of determined service life was investigated using an apparatus for field testing of cartridges in the workplace.   Results: The results showed that existing schedule for changing the respirator cartridges is not effective and no longer provide adequate protection for sprayers against organic contaminants while working in a painting booth. It is necessary to change the cartridges before their estimated service life (every 4 hours.   Conclusion: NIOSH MultiVapor has acceptable efficiency for determining respirator cartridges service life and could be used as a simple and practical method in the workplace. Moreover, Service life estimated by this software was confirmed by cartridge field test apparatus.

Heating calculation features at self-start of large asynchronous motor

Science.gov (United States)

Shevchenko, A. A.; Temlyakova, Z. S.; Grechkin, V. V.; Vilberger, M. E.

2017-10-01

The article proposes a method for optimizing the incremental heating calculation in the active volume of a large asynchronous motor for certain kinds of load characteristics. The incremental heating calculation is conditioned by the need to determine the aging level of the insulation and to predict a decrease in the electric machine service life. The method for optimizing the incremental heating calculation of asynchronous motor active volume is based on the automation of calculating the heating when simulating the self-starting process of the motor after eliminating an AC drop.

Evaluation of Hose in Hose Transfer Line Service Life for Hanford's Interim Stabilization Program

International Nuclear Information System (INIS)

TORRES, T.D.

2000-01-01

RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program, defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program, has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning. Prudent engineering dictates that the equipment placed in service have a working life in excess of this forecasted time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer and published literature. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are process fluid characteristics, ambient environmental conditions, and the manufacturer's stated shelf life. This evaluation examines the manufacturer's certification of shelf life, the manufacturer's certifications of chemical compatibility with waste, and published literature on the effects of exposure to ionizing radiation on the mechanical properties of elastomeric materials to evaluate transfer line service life

Associated and mediating variables related to quality of life among service users with mental disorders.

Science.gov (United States)

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie

2018-02-01

This study aimed to identify variables associated with quality of life (QoL) and mediating variables among 338 service users with mental disorders in Quebec (Canada). Data were collected using nine standardized questionnaires and participant medical records. Quality of life was assessed with the Satisfaction with Life Domains Scale. Independent variables were organized into a six-block conceptual framework. Using structural equation modeling, associated and mediating variables related to QoL were identified. Lower seriousness of needs was the strongest variable associated with QoL, followed by recovery, greater service continuity, gender (male), adequacy of help received, not living alone, absence of substance use or mood disorders, and higher functional status, in that order. Recovery was the single mediating variable linking lower seriousness of needs, higher service continuity, and reduced alcohol use with QoL. Findings suggest that greater service continuity creates favorable conditions for recovery, reducing seriousness of needs and increasing QoL among service users. Lack of recovery-oriented services may affect QoL among alcohol users, as substance use disorders were associated directly and negatively with QoL. Decision makers and mental health professionals should promote service continuity, and closer collaboration between primary care and specialized services, while supporting recovery-oriented services that encourage service user involvement in their treatment and follow-up. Community-based organizations should aim to reduce the seriousness of needs particularly for female service users and those living alone.

Calculating the return on investment of mobile healthcare.

Science.gov (United States)

Oriol, Nancy E; Cote, Paul J; Vavasis, Anthony P; Bennet, Jennifer; Delorenzo, Darien; Blanc, Philip; Kohane, Isaac

2009-06-02

Mobile health clinics provide an alternative portal into the healthcare system for the medically disenfranchised, that is, people who are underinsured, uninsured or who are otherwise outside of mainstream healthcare due to issues of trust, language, immigration status or simply location. Mobile health clinics as providers of last resort are an essential component of the healthcare safety net providing prevention, screening, and appropriate triage into mainstream services. Despite the face value of providing services to underserved populations, a focused analysis of the relative value of the mobile health clinic model has not been elucidated. The question that the return on investment algorithm has been designed to answer is: can the value of the services provided by mobile health programs be quantified in terms of quality adjusted life years saved and estimated emergency department expenditures avoided? Using a sample mobile health clinic and published research that quantifies health outcomes, we developed and tested an algorithm to calculate the return on investment of a typical broad-service mobile health clinic: the relative value of mobile health clinic services = annual projected emergency department costs avoided + value of potential life years saved from the services provided. Return on investment ratio = the relative value of the mobile health clinic services/annual cost to run the mobile health clinic. Based on service data provided by The Family Van for 2008 we calculated the annual cost savings from preventing emergency room visits, $3,125,668 plus the relative value of providing 7 of the top 25 priority prevention services during the same period, US$17,780,000 for a total annual value of $20,339,968. Given that the annual cost to run the program was $567,700, the calculated return on investment of The Family Van was 36:1. By using published data that quantify the value of prevention practices and the value of preventing unnecessary use of emergency

Burden of road traffic accidents in Nepal by calculating disability-adjusted life years

Directory of Open Access Journals (Sweden)

Ling Huang

2017-10-01

Full Text Available Objective: To calculate the burden of road traffic accidents in Kathmandu Valley and then extrapolate this to the national level. Methods: A prospective study was performed to compute the burden of road traffic accidents by quantification of disability-adjusted life years (DALYs using the Global Burden of Disease Study method on the basis of 1-year data from nine hospitals in Nepal and the Department of Forensic Medicine and cross-checked with the Nepal Traffic Directorate. Multiple methods were applied to the extrapolated population metrics of the burden of road traffic accidents in Nepal. Results: The total number of years of life lived in disability, years of life lost, and DALYs in Nepal were 38,848±194, 119,935±1464, and 158,783±1658 (95% confidence interval respectively. The number of years lost because of morbidity and death was similar in Kathmandu Valley. Most (75% of the DALYs resulted from years of life lost in Nepal. Males accounted for 73% of DALYs. Almost half (44% of the DALYs were contributed by the group aged 15–29 years. Conclusion: This study is the first to calculate the burden of road traffic accidents in Nepal using Nepal’s own data. Nepal needs to develop and enhance its own system to identify significant public health issues so as to set national priorities for prevention of road traffic accidents.

Cost calculator methods for estimating casework time in child welfare services: A promising approach for use in implementation of evidence-based practices and other service innovations.

Science.gov (United States)

Holmes, Lisa; Landsverk, John; Ward, Harriet; Rolls-Reutz, Jennifer; Saldana, Lisa; Wulczyn, Fred; Chamberlain, Patricia

2014-04-01

Estimating costs in child welfare services is critical as new service models are incorporated into routine practice. This paper describes a unit costing estimation system developed in England (cost calculator) together with a pilot test of its utility in the United States where unit costs are routinely available for health services but not for child welfare services. The cost calculator approach uses a unified conceptual model that focuses on eight core child welfare processes. Comparison of these core processes in England and in four counties in the United States suggests that the underlying child welfare processes generated from England were perceived as very similar by child welfare staff in California county systems with some exceptions in the review and legal processes. Overall, the adaptation of the cost calculator for use in the United States child welfare systems appears promising. The paper also compares the cost calculator approach to the workload approach widely used in the United States and concludes that there are distinct differences between the two approaches with some possible advantages to the use of the cost calculator approach, especially in the use of this method for estimating child welfare costs in relation to the incorporation of evidence-based interventions into routine practice.

Development of laboratory acceleration test method for service life prediction of concrete structures

International Nuclear Information System (INIS)

Cho, M. S.; Song, Y. C.; Bang, K. S.; Lee, J. S.; Kim, D. K.

1999-01-01

Service life prediction of nuclear power plants depends on the application of history of structures, field inspection and test, the development of laboratory acceleration tests, their analysis method and predictive model. In this study, laboratory acceleration test method for service life prediction of concrete structures and application of experimental test results are introduced. This study is concerned with environmental condition of concrete structures and is to develop the acceleration test method for durability factors of concrete structures e.g. carbonation, sulfate attack, freeze-thaw cycles and shrinkage-expansion etc

mORCA: ubiquitous access to life science web services.

Science.gov (United States)

Diaz-Del-Pino, Sergio; Trelles, Oswaldo; Falgueras, Juan

2018-01-16

Technical advances in mobile devices such as smartphones and tablets have produced an extraordinary increase in their use around the world and have become part of our daily lives. The possibility of carrying these devices in a pocket, particularly mobile phones, has enabled ubiquitous access to Internet resources. Furthermore, in the life sciences world there has been a vast proliferation of data types and services that finish as Web Services. This suggests the need for research into mobile clients to deal with life sciences applications for effective usage and exploitation. Analysing the current features in existing bioinformatics applications managing Web Services, we have devised, implemented, and deployed an easy-to-use web-based lightweight mobile client. This client is able to browse, select, compose parameters, invoke, and monitor the execution of Web Services stored in catalogues or central repositories. The client is also able to deal with huge amounts of data between external storage mounts. In addition, we also present a validation use case, which illustrates the usage of the application while executing, monitoring, and exploring the results of a registered workflow. The software its available in the Apple Store and Android Market and the source code is publicly available in Github. Mobile devices are becoming increasingly important in the scientific world due to their strong potential impact on scientific applications. Bioinformatics should not fall behind this trend. We present an original software client that deals with the intrinsic limitations of such devices and propose different guidelines to provide location-independent access to computational resources in bioinformatics and biomedicine. Its modular design makes it easily expandable with the inclusion of new repositories, tools, types of visualization, etc.

Mobile phone use for contacting emergency services in life-threatening circumstances.

Science.gov (United States)

Wu, Olivia; Briggs, Andrew; Kemp, Tom; Gray, Alastair; MacIntyre, Kate; Rowley, Jack; Willett, Keith

2012-03-01

The potential health benefits of mobile phone use have not been widely studied, except for telemedicine-type applications. This study seeks to determine whether initial contact with emergency services via a mobile phone in life-threatening situations is associated with potential health benefits when compared to contact via a landline. A record-linkage study was carried out in which data from all emergency dispatches for immediately life-threatening events from a United Kingdom county ambulance service were linked to the Patient Admission System at two major local hospitals. Mortality (at the scene, at the emergency department [ED], and during hospitalization); transfer to the ED; admission (inpatient care, and intensive care unit); and length of stay were analyzed for calls classified as Code Red (immediately life-threatening) by initial exposure (mobile phone vs. landline), while controlling for potential confounding variables. Of 354,199 ambulances dispatched to attend emergency incidents, 66% transported patients to the hospital while 2% stood down due to death at the scene. Mobile phone compared to landline reporting of emergencies resulted in significant reductions in the risk of death at the scene (odds ratio [OR] 0.77), but not for death in the ED or during inpatient admission. The risk of being transferred to the ED and subsequent inpatient admission were significantly lower with reporting from mobile phones compared to landline (OR 0.93 and OR 0.82, respectively). In this study, evidence of statistical association was demonstrated between the use of mobile phones to alert ambulance services in life-threatening situations and improved outcomes for patients. Copyright © 2012 Elsevier Inc. All rights reserved.

Computational Everyday Life Human Behavior Model as Servicable Knowledge

Science.gov (United States)

Motomura, Yoichi; Nishida, Yoshifumi

A project called `Open life matrix' is not only a research activity but also real problem solving as an action research. This concept is realized by large-scale data collection, probabilistic causal structure model construction and information service providing using the model. One concrete outcome of this project is childhood injury prevention activity in new team consist of hospital, government, and many varieties of researchers. The main result from the project is a general methodology to apply probabilistic causal structure models as servicable knowledge for action research. In this paper, the summary of this project and future direction to emphasize action research driven by artificial intelligence technology are discussed.

The influences of patient's satisfaction with medical service delivery, assessment of medical service, and trust in health delivery system on patient's life satisfaction in China.

Science.gov (United States)

Tang, Liyang

2012-09-14

Patient's satisfaction with medical service delivery/assessment of medical service/trust in health delivery system may have significant influence on patient's life satisfaction in China's health delivery system/in various kinds of hospitals.The aim of this study was to test whether and to what extent patient's satisfaction with medical service delivery/patient's assessments of various major aspects of medical service/various major aspects of patient's trust in health delivery system influenced patient's life satisfaction in China's health delivery system/in various kinds of hospitals. This study collaborated with National Bureau of Statistics of China to carry out a 2008 national urban resident household survey in 17 provinces, autonomous regions, and municipalities directly under the central government (N = 3,386), and specified ordered probit models were established to analyze dataset from this household survey. The key considerations in generating patient's life satisfaction involved patient's overall satisfaction with medical service delivery, assessment of doctor-patient communication, assessment of medical cost, assessment of medical treatment process, assessment of medical facility and hospital environment, assessment of waiting time for medical service, trust in prescription, trust in doctor, and trust in recommended medical examination. But the major considerations in generating patient's life satisfaction were different among low level public hospital, high level public hospital, and private hospital. The promotion of patient's overall satisfaction with medical service delivery, the improvement of doctor-patient communication, the reduction of medical cost, the improvement of medical treatment process, the promotion of medical facility and hospital environment, the reduction of waiting time for medical service, the promotion of patient's trust in prescription, the promotion of patient's trust in doctor, and the promotion of patient's trust in

Analysis and modeling of hot extrusion die for its service life enhancement

Science.gov (United States)

Akhtar, Syed Sohail

Aluminum extrusion finds extensive application in the construction, automobile and aerospace industries. High pressures, elevated temperatures, complex and intricate section geometries lead to repeated mechanical and thermal stresses in the die and affiliated tooling. Product rework and rejects can be traced back to various defects spread over the die life cycle: die design, die manufacture and heat treatment, process parameters, inprocess die maintenance/correction and, billet type and quality. Therefore, improved and efficient service life of die and related tooling used in the extrusion press is one the most important factors in maximizing productivity and minimizing cost for ensuring the economical efficiency of an aluminum extrusion plant. How often a die has to be scrapped and replaced with a new one directly contributes to the commercial viability of producing a certain profile. The focus of the current work is on three distinct yet inter-related studies pertaining to the improvement of aluminum extrusion die. Study-A (Die Failure Analysis) is an investigation of various modes and critical failure types based on industrial data (Chapter-2 ), examination of failed dies and finite element simulation for identification of critical process parameters and design features in die fatigue-life (Chapter-3). In Study-B (Die Surface Hardening Treatment), two-stage controlled gas nitriding process for H13 steel is evaluated, both experimentally and numerically, in terms of nitrided case morphology and properties (Chapter-4) followed by experimental and numerical investigation of the effects of repeated nitriding (Chapter-5), pre-nitriding surface preparation (Chapter-6) and die profile geometry (Chapter-7) on nitriding performance in regard to die service life. In Study-C (Effect of Billet Quality on Die Life), the effect of billet quality and related influencing extrusion parameters on the die service life is investigated based on industrial data and some regression

Estimation of residual life of boiler tubes using steamside oxide scale thickness

International Nuclear Information System (INIS)

Vikrant, K.S.N.; Ramareddy, G.V.; Pavan, A.H.V.; Singh, Kulvir

2013-01-01

In thermal power plants, remaining-life-estimation of boiler tubes is required at regular intervals for a safer and a better functionality of boilers. In this paper, a new method is proposed for the residual life estimation of service exposed boiler tubes using Non-Destructive Ultrasonic Oxide scale thickness measurements, average metal temperature and creep master curve. While steady state conduction heat transfer equations are solved to calculate the average metal temperature, creep master curve is generated from short term stress rupture data of rupture life less than 5000 h on a virgin material. In the present study, the residual life of T22 (2.25Cr-1Mo) service exposed Platen Superheater tube is estimated using two master creep curves, i.e. Larson-Miller Parametric (LMP) method of standard ASME T22 creep data and Wilshire approach of short term stress rupture data of T22. As the residual life is calculated from fundamental conduction heat transfer theory and creep rupture data, the proposed method can be applied for different grades of boiler materials. -- Highlights: ► Residual life is calculated from non-destructive oxide scale thickness, creep master curve and average metal temperature. ► A new method is proposed for calculating residual life using above parameters and from conduction heat transfer principles. ► The method can be applied to different boiler grades for estimating residual life and hence the method is generic

Methodological aspects to be considered in evaluating the economics of service measures

International Nuclear Information System (INIS)

Bald, M.

1987-01-01

For the purposes of the report, service measures is used as a term denoting all those steps which exceed the framework of normal in-service maintenance and repair and serve to improve economics over the normal case. Positive impacts are to be achieved on such parameters as availability, efficiency, and service life. One of the aspects investigated is the effect, if any, of such measures on the residual service life of plants in operation for a long period of time already. Residual service life in this case means the remaining span of effective technical and economic operation which, in these model calculations, also includes part of the period of depreciation. (orig.) [de

Development of methodology for disability-adjusted life years (DALYs calculation based on real-life data.

Directory of Open Access Journals (Sweden)

Ellen A Struijk

Full Text Available BACKGROUND: Disability-Adjusted Life Years (DALYs have the advantage that effects on total health instead of on a specific disease incidence or mortality can be estimated. Our aim was to address several methodological points related to the computation of DALYs at an individual level in a follow-up study. METHODS: DALYs were computed for 33,507 men and women aged 20-70 years when participating in the EPIC-NL study in 1993-7. DALYs are the sum of the Years Lost due to Disability (YLD and the Years of Life Lost (YLL due to premature mortality. Premature mortality was defined as death before the estimated date of individual Life Expectancy (LE. Different methods to compute LE were compared as well as the effect of different follow-up periods using a two-part model estimating the effect of smoking status on health as an example. RESULTS: During a mean follow-up of 12.4 years, there were 69,245 DALYs due to years lived with a disease or premature death. Current-smokers had lost 1.28 healthy years of their life (1.28 DALYs 95%CI 1.10; 1.46 compared to never-smokers. The outcome varied depending on the method used for estimating LE, completeness of disease and mortality ascertainment and notably the percentage of extinction (duration of follow-up of the cohort. CONCLUSION: We conclude that the use of DALYs in a cohort study is an appropriate way to assess total disease burden in relation to a determinant. The outcome is sensitive to the LE calculation method and the follow-up duration of the cohort.

Measuring the Effect of Tourism Services on Travelers' Quality of Life: Further Validation.

Science.gov (United States)

Neal, Janet D.; Sirgy, M. Joseph; Uysal, Muzaffer

2004-01-01

lication and extension study provided additional validational support of the original tourism services satisfaction measure in relation to QOL-related measures.Neal, Sirgy and Uysal (1999) developed a model and a measure to capture the effect of tourism services on travelers' quality of life (QOL). They hypothesized that travelers' overall life…

Risk based service life prediction of underground cast iron pipes subjected to corrosion

International Nuclear Information System (INIS)

Li, C.Q.; Mahmoodian, M.

2013-01-01

Aging and deterioration of underground cast iron pipes is inevitable after their long time in service, with corrosion being the most predominant mechanism for pipe failures. Although considerable research has been undertaken in the past few decades, more is on the effects of corrosion on structural capacity of pipes than that on the prediction of their service life. This paper presents a methodology to quantitatively assess the risk of pipe collapse and predict its remaining service life using a time-dependent reliability theory. The concept of stress intensity in fracture mechanics is employed to establish the failure criterion of pipe collapse. An empirical model is derived for maximum pit growth of corrosion from the available data based on mathematical regressions. An example is provided to illustrate the application of the proposed method. It is found in the paper that the risk of pipe collapse increases with an increase in the diameter of the pipe for both external and internal corrosion. It is also found that the tougher the pipe is, the smaller the risk of its collapse. The paper concludes that a time-dependent reliability method is a very useful tool to predict the risk of pipe collapse and its remaining service life. The proposed method can help the water industry develop rehabilitation or replacement strategy for existing pipe networks with a view for better management of the pipe asset

Energy use in repairs by cover concrete replacement or silane treatment for extending service life of chloride-exposed concrete structures

Science.gov (United States)

Petcherdchoo, A.

2018-05-01

In this study, the service life of repaired concrete structures under chloride environment is predicted. This prediction is performed by considering the mechanism of chloride ion diffusion using the partial differential equation (PDE) of the Fick’s second law. The one-dimensional PDE cannot simply be solved, when concrete structures are cyclically repaired with cover concrete replacement or silane treatment. The difficulty is encountered in solving position-dependent chloride profile and diffusion coefficient after repairs. In order to remedy the difficulty, the finite difference method is used. By virtue of numerical computation, the position-dependent chloride profile can be treated position by position. And, based on the Crank-Nicolson scheme, a proper formulation embedded with position-dependent diffusion coefficient can be derived. By using the aforementioned idea, position- and time-dependent chloride ion concentration profiles for concrete structures with repairs can be calculated and shown, and their service life can be predicted. Moreover, the use of energy in different repair actions is also considered for comparison. From the study, it is found that repairs can control rebar corrosion and/or concrete cracking depending on repair actions.

Web-service architecture for tools supporting life-long e-Learning platforms

NARCIS (Netherlands)

Dimov, Alexander; Stefanov, Krassen

2009-01-01

Dimov, A., & Stefanov, K. (2008). Web-service architecture for tools supporting life-long e-Learning platforms. In R. Koper, K. Stefanov & D. Dicheva (Eds.), Proceedings of the 5th International TENCompetence Open Workshop "Stimulating Personal Development and Knowledge Sharing" (pp. 67-71).

Stator winding service life analysis of wet winding motor RCP

International Nuclear Information System (INIS)

Yeoh Eingyee; Li Linsen; Wang Ziguan; Shen Feng

2017-01-01

The reactor coolant pump type RUV of KSB is specially designed for the Westinghouse AP1000 reactor. It is hermetically sealed, wet winding motor pump. This wet winding motor concept has higher efficiency as compared to a canned motor since there are no eddy current losses, but this makes the stator cable insulator face the challenge of degradation by γ-irradiation in coolant. Radiation dose at the RUV is evaluated in interest from the material degradation point of view and the service life of stator winding in RUV is preliminarily analyzed. The values obtained are less than the dose rate and the dose which change the mechanical properties of the insulator material. According to the preliminary analysis, it can be concluded that the degradation of cable insulator of stator winding by γ-irradiation in coolant is negligible for the 60 years' service life of reactor coolant pump. This result also ensures crosslinked polyethylene used as cable insulator of stator winding is reliable in reactor coolant pump. (author)

42 CFR 419.32 - Calculation of prospective payment rates for hospital outpatient services.

Science.gov (United States)

2010-10-01

... outpatient services furnished in 1999 would have equaled the base expenditure target calculated in § 419.30... inpatient market basket percentage increase applicable under section 1886(b)(3)(B)(iii) of the Act reduced... 1, 2001 and before April 1, 2001, by the hospital inpatient market basket percentage increase...

How Do Mobile Information Services Improve Quality of Life? The Case of Japanese Students

OpenAIRE

Ghyas, Qazi Mahdia; Kondo, Fumiyo N.

2016-01-01

Every technology should be geared to improve the quality of users’ lives. Our study aims to understand how mobile information services (MIS) contribute to quality of life (QoL) for young mobile users. This paper attempts to provide a comprehensive analysis of relationship between two variables: the contribution of MIS in 15 specific life domains and the contribution of MIS to overall quality of life (QoL). We examined bottom-up spillover theory with original and our additional life domains. E...

Methodology for calculating perception of the user experience of the quality of monitored integrated telecommunications operator services

NARCIS (Netherlands)

2011-01-01

The invention relates to a method for calculating perception of the user experience of the quality of monitored integrated telecommunications operator services. For this purpose, data from the monitoring of user services is used, along with questionnaires previously completed by a representative

Reliability and service life of wood structures and buildings

OpenAIRE

Zdeňka Havířová; Pavel Kubů

2005-01-01

Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC) of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1), energy savings and thermal protection (ER6) and hygiene, health and e...

Evaluation of Hose in Hose Transfer Line Service Life for Hanford's Interim Stabilization Program

Energy Technology Data Exchange (ETDEWEB)

TORRES, T.D.

2000-08-24

RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program, defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program, has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning. Prudent engineering dictates that the equipment placed in service have a working life in excess of this forecasted time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer and published literature. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are process fluid characteristics, ambient environmental conditions, and the manufacturer's stated shelf life. This evaluation examines the manufacturer's certification of shelf life, the manufacturer's certifications of chemical compatibility with waste, and published literature on the effects of exposure to ionizing radiation on the mechanical properties of elastomeric materials to evaluate transfer line service life.

DEPENDENCIES TO DETERMINE THE MEASURE OF DAMAGE AND CALCULATION OF RESIDUAL LIFE OF REINFORCED CONCRETE SUPERSTRUCTURE, EXPOSED TO SALT CORROSION

OpenAIRE

SAATOVA NODIRA ZIYAYEVNA

2016-01-01

In this paper we consider the current method of determining the measure of damage of concrete and reinforcement. The proposed dependence measures of damage, convenient for use in predicting the life of structures superstructures.The practical method of calculation determination of residual resource of the exploited superstructures developed. The main source of data for calculating the residual life are the parameters defined by the technical diagnosis.

Tackling the work-life balance challenge in Professional Service Firms: the impact of projects, organizing and service characteristics

NARCIS (Netherlands)

Noury, L.C.; Gand, Sébastien; Sardas, Jean-Claude

2017-01-01

Professional Service Firms (PSFs) are currently under considerable pressure for economic reasons (low growth, pressure on cost), but also from the emergence of individual demands for work-life balance (WLB) from professionals, which challenge traditional ways of organizing both projects and careers.

Home care clients in the last year of life: is material deprivation associated with service characteristics?

Science.gov (United States)

Goodridge, Donna; Buckley, Alan; Marko, Josh; Steeves, Megan; Turner, Hollie; Whitehead, Steve

2011-09-01

To compare demographic, social, medical, and health care characteristics of home care clients in the last year of life by quintile of deprivation and examine associations between material deprivation and service characteristics. This retrospective study used administrative data for 700 clients who died while receiving home care services. Outcome measures were the receipt of supportive or palliative home care. Associations were assessed using multiple logistic regression. Material deprivation was not associated with either the hours of home care received or the receipt of supportive home care services. Clients with dementia or stroke, those were older than 80 years and those who were single were less likely to receive palliative care services than other groups. Inequalities in allocation of home care services based on age, diagnosis, and marital status, but not material deprivation, suggest the need to carefully match service with need at the end of life.

Strategies for the improvement of quality of life and service at the wellsite

International Nuclear Information System (INIS)

Lombardo, G.J.; McCants, K.J.; Klein, M.

1991-01-01

The oil industry, particularly exploration and production drilling has always had to contend with a remarkable set of conditions: complicated logistics, remote locations, twenty four hour daily operations, and long and uneven schedules, to mention only a few. Invariably, operations personnel particularly service company personnel are required to perform highly technical, often critical tasks for long periods of time without the benefit of sustained periods of restfulness. This condition is compounded by irregular days-off schedules and the offshore environment itself. Research in other industries has shown that scheduling conditions similar to those experienced in the E and P drilling industry have lowered the standard of life, general health, safety and performance of employees. With the move towards higher technology and even more critical tasks, more demanding employees and an essentially unchanged working environment, the problems are compounded even further. Work related stress and quality of life have become important factors in our employees' career decisions and their ability to work safely. This paper discusses the evaluation of the work schedule and work/living conditions of the wellsite measurement and services personnel of Anadrill Schlumberger, and concludes with methods to improve the safety, health and general quality of life of those personnel and the service quality they can deliver

Analysis of NPP pipes and equipment damage in life time prolongation

International Nuclear Information System (INIS)

Tkachev, V.V.; Zheltukhin, K.K.

2008-01-01

Paper describes a procedure to calculate the probability of pipes and equipment failure taking account of both the service records of the structures under various conditions and their aging. The parameters characterizing applied loads, failures, as well as metal strength, mechanical and thermal properties serve as the arbitrary values used in the described procedure. Paper presents an example of the probability calculation of failure of the RBMK emergency feed pump recirculation pipes when their service life is prolonged [ru

An integrated approach to calculate life cycle costs of arms and military equipment

Directory of Open Access Journals (Sweden)

Vlada S. Sokolović

2013-12-01

of goods or services, bid and supplier evaluation, negotiations, as well as contract and project administration. Administrative activities include processing and dispatching orders, comparing delivery and receipt confirmations, invoice receipt and verification, record-keeping and others. The identified existing and potential failures occurring in the procurement of military assets and affecting the optimization of use of financial resources, include: lack of adequate staff, imprecise legal regulations of procurement, lack of multi-year framework agreements related to the acquisition, insufficient and inadequate market research, incomplete adherence to the existing norms, late placing of funds at the disposal of the procurement service, untimely and inaccurate procurement planning, poor quality technical documentation, disrespect for deadlines, inadequate frequency of purchases, a number of "urgent and confidential procurements,", absence of a system limiting the time of procurement activities, absence of an adequate structure to deal with procurement control, etc. In addition, an integrated information system or a database that would allow access to the data and the analysis of the dynamics of costs would ensure proper assessment of costs of investments in equipping the military with AME.. CONCLUSION Determining AME  life cycle costs should be made at an early phase of asset development because it can repeatedly affect the total amount and cost reduction through project changing. In the cost analysis, it is desirable to use mathematical models and methods developed in the theory and practice to allow accurate calculations of the elements necessary for a cost estimate. The biggest costs occur in the functional competence of logistics which shows that equipping the army must be based on logistic grounds for efficiency and cost saving throughout the life cycle of the asset. The initial cost of assets in relation to the costs that appear at the end of their life cycle

Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service.

NARCIS (Netherlands)

Gerritse, B.M.; Schalkwijk, A.; Pelzer, B.J.; Scheffer, G.J.; Draaisma, J.M.T.

2010-01-01

BACKGROUND: To determine the advanced life support procedures provided by an Emergency Medical Service (EMS) and a Helicopter Emergency Medical Service (HEMS) for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures

Evaluation of Service Life of Polystyrene in Tropical Marine Environment by Principal Component Analysis

Directory of Open Access Journals (Sweden)

Dongdong Song

2015-01-01

Full Text Available To predict the service life of polystyrene (PS under an aggressive environment, the nondimensional expression Z was established from a data set of multiple properties of PS by principal component analysis (PCA. In this study, PS specimens were exposed to the tropical environment on Xisha Islands in China for two years. Chromatic aberration, gloss, tensile strength, elongation at break, flexural strength, and impact strength were tested to evaluate the aging behavior of PS. Based on different needs of industries, each of the multiple properties could be used to evaluate the service life of PS. However, selecting a single performance variation will inevitably hide some information about the entire aging process. Therefore, finding a comprehensive measure representing the overall aging performance of PS can be highly significant. Herein, PCA was applied to obtain a specific property (Z which can represent all properties of PS. Z of PS degradation showed a slight decrease for the initial two months of exposure after which it increased rapidly in the next eight months. Subsequently, a slower increase of Z value was observed. From the three different stages shown as Z value increases, three stages have been identified for PS service life.

Life Management of high energy piping girth welds

International Nuclear Information System (INIS)

Cohn, M.J.; Paterson, S.R.

1994-01-01

Life management of high energy piping systems is a synergistic process that combines the collective results from nondestructive examination (NDE), stress analysis, metallurgical replication, and fracture mechanics evaluations. To achieve conclusions with high confidence and reliability, the methodology requires that: (1) all weldments must be appropriately examined to establish initial baseline data and indicate both fabrication and inservice damage, (2) as-found stress analyses must be consistent with field estimated displacements to select sites of maximum in-service damage, and (3) metallurgical replicas must be taken at high stress sites determined as an outcome of a life exhaustion evaluation. The multidiscipline tasks are effectively managed by developing a rational framework incorporating all of the above requirements. Analytical algorithms that estimate linear and nonlinear degradation effects are included in the remaining life predictions. High damage locations are selected based on a life exhaustion calculation. Localized remaining life and reexamination intervals for failures governed by creep and fatigue damage are estimated by metallurgical replica cavitation damage and the service life. Stress-based creep damage identified in metallurgical replicas should correspond to the predicted high damage locations from the life exhaustion calculation. The methodology minimizes future reexamination locations while providing high certainty of monitoring lead-the-fleet damage. This life management program recognizes the aging process in plant equipment. It establishes a continuous process of examinations, evaluations, and decisions to track degradation of the piping system life cycle. Potential problems are identified long before failures occur. Corrective action is taken during scheduled outages to maintain the required level of plant performance

Quality of life in Nepalese patients with low vision and the impact of low vision services

Directory of Open Access Journals (Sweden)

Rajendra Gyawali

2012-10-01

Conclusions: Low vision patients have poor quality of life as measured with the NEI VFQ-25. Low vision service is associated with improved visual function, better quality of life and high rate of patient satisfaction.

Using life strategies to explore the vulnerability of ecosystem services to invasion by alien plants

NARCIS (Netherlands)

Vicente, J.; Pinro, A.; Araujo, M.; Lomba, A.; Randin, C.; Guisan, A.; Honrado, J.; Verburg, P.H.

2013-01-01

Invasive plants can have different effects on ecosystem functioning and on the provision of ecosystem services, with the direction and magnitude of such effects depending on the service and ecosystem being considered, but also on the life strategies of the invaders. Strategies can influence

The rationale for selecting the method of calculation of project products coast (works, services

Directory of Open Access Journals (Sweden)

O. V. Molchanova

2017-01-01

Full Text Available In modern conditions of management it is necessary to develop a number of recommendations on the introduction of management accounting at state-owned enterprises that carry out revenue-generating activities or based on the right of economic management. It is necessary to apply the correct cost-accounting method for the production of products, works, services for a more rational calculation of the cost price. This will allow management personnel to receive timely objective information about their cost price, identify the feasibility of production and sales, justify the assortment, plan profits. The procedure for determining the cost price of the project products (works, services in the theory and practice of the state enterprise of the Astrakhan region “Kasprybproekt” is investigated in the work. With the existing practice of planning in design organizations, the planned cost price of design and survey works for established cost items is planned in the cost estimate for production by the design organization as a whole and by the types of work: design, survey and others, without subdividing it by orders (projects. According to this, accounting of the actual costs for work in the design organizations is based. The study showed that the state enterprise of the Astrakhan region “Kasprybproyekt” performs different projects with different execution periods; therefore, it is advisable to use one method of calculating the cost price - job (order costing method, and link it to the responsibility centers depending on the department of the performer. Based on the research of the used method to the cost price calculate of the project products (works, services in the state enterprise of the Astrakhan region “Kasprybproekt”, it was proposed to use the job (order costing method that allows to detail all the project costs without distorting the final financial result and optimize the project costs. If the calculation method is correctly determined

Accounting for time-dependent effects in biofuel life cycle greenhouse gas emissions calculations.

Science.gov (United States)

Kendall, Alissa; Chang, Brenda; Sharpe, Benjamin

2009-09-15

This paper proposes a time correction factor (TCF) to properly account for the timing of land use change-derived greenhouse gas emissions in the biofuels life cycle. Land use change emissions occur at the outset of biofuel feedstock production, and are typically amortized over an assumed time horizon to assign the burdens of land use change to multiple generations of feedstock crops. Greenhouse gas intensity calculations amortize emissions by dividing them equally over a time horizon, overlooking the fact that the effect of a greenhouse gas increases with the time it remains in the atmosphere. The TCF is calculated based on the relative climate change effect of an emission occurring at the outset of biofuel feedstock cultivation versus one amortized over a time horizon. For time horizons between 10 and 50 years, the TCF varies between 1.7 and 1.8 for carbon dioxide emissions, indicating that the actual climate change effect of an emission is 70-80% higher than the effect of its amortized values. The TCF has broad relevance for correcting the treatment of emissions timing in other life cycle assessment applications, such as emissions from capital investments for production systems or manufacturing emissions for renewable energy technologies.

Evaluation of operating experience for service life of components

International Nuclear Information System (INIS)

Schulz, H.; Sunder, R.

1987-01-01

The evaluation of the operating experience of German light-water reactor components based on licensee event reports indicates that a large part of the defects and failures are caused by fatigue and/or corrosion type mechanisms. Actions have been taken to eliminate the causes by redesigning systems, replacement of components and change of operating procedures. The interaction of fatigue and corrosion mechanisms are not understood in all details today, further research is still necessary. To establish a more realistic data base of the local loading and water chemistry condition for all loading conditions the application of advanced monitoring systems is proposed. The benefits of these systems are that the operating procedures can be further optimized, the actual used life time fraction can be calculated regularly and the data base can be used for life time extension. (orig.) [de

Life extension, power upgrade, and return to service work for Pickering NGS and other PWR and CANDU plants

International Nuclear Information System (INIS)

Millman, J.; Idvorian, N.; Schneider, W.

2002-01-01

Work on life extension, power upgrade and return to service has been performed and is in progress for a number of PWR and CANDU plants. For PWR plants, power upgrade work has been done for the new replacement steam generators in several cases. This work consists of redoing the formal equipment qualification analysis and reports for the uprated operating conditions to support the application for license adjustment. Life extension assessments have been performed for several CANDU plants. These are highly detailed assessments in which the particular steam generator is reassessed part by part as to the ability of each to sustain full life operation and also extended life operation. Return to service work for Pickering NGSA specifically has included this type of assessment and also specific repair, cleaning and retrofit activities including secondary side inspection, waterlancing, divider plate repair, eddy current inspection, etc. Steam generator modifications and retrofit work have been performed in a number of cases. The paper discusses various life extension, power upgrade, equipment modification and return to service activities all of which are part of the renewed drive in the industry to realise the full potential of nuclear plants by getting more and better performance from the extended service of existing plants. (author)

International Space Station Bacteria Filter Element Post-Flight Testing and Service Life Prediction

Science.gov (United States)

Perry, J. L.; von Jouanne, R. G.; Turner, E. H.

2003-01-01

The International Space Station uses high efficiency particulate air (HEPA) filters to remove particulate matter from the cabin atmosphere. Known as Bacteria Filter Elements (BFEs), there are 13 elements deployed on board the ISS's U.S. Segment. The pre-flight service life prediction of 1 year for the BFEs is based upon performance engineering analysis of data collected during developmental testing that used a synthetic dust challenge. While this challenge is considered reasonable and conservative from a design perspective, an understanding of the actual filter loading is required to best manage the critical ISS Program resources. Thus testing was conducted on BFEs returned from the ISS to refine the service life prediction. Results from this testing and implications to ISS resource management are discussed. Recommendations for realizing significant savings to the ISS Program are presented.

Influence of flexible pin for planets on service life of wind turbine gearboxes

International Nuclear Information System (INIS)

Park, Young Jun; Lee, Geun Ho; Nam, Yong Yun; Kim, Jeong Kil

2012-01-01

An overhung mounted carrier with flexible pins is applied to the planetary gear train of a wind turbine gearbox to investigate the influence of the self aligning effect by means of the deflection of the planet spindle and the flexible pin on the lifetime of the planet gear for a wind turbine gearbox. To analyze the load distribution of planet gears, both Euler theory and commercial software are employed. By applying an overhung mounted carrier with flexible pins in the wind turbine gearbox, we can improve the misalignment performance, face load factor, and service life of the planet gears. In particular, it was confirmed that a service life of more than 20 years could be realized for wind turbine gearboxes by applying a flexible pin to overhung mounted carrier

Residential immersive life skills programs for youth with disabilities: service providers' perceptions of change processes.

Science.gov (United States)

King, Gillian; McPherson, Amy; Kingsnorth, Shauna; Stewart, Debra; Glencross-Eimantas, Tanya; Jones-Galley, Kimberlea; Morrison, Andrea; Isihi, Ana Maria; Gorter, Jan Willem

2015-05-01

Residential immersive life skills (RILS) programs are designed to equip youth with physical disabilities with the foundational life skills required to assume adult roles. The objective was to determine RILS service providers' perceptions of the active ingredients of the intervention change process. Thirty-seven service providers from various disciplines completed measures to assess expertise status and participated in qualitative interviews. Qualitative themes were derived, and similarities and differences in themes were identified for blinded groups of novices, intermediates, and experts. The three main themes, reflecting change processes, were: (a) creating a supportive program atmosphere with multiple opportunities for learning, (b) using strategies to support, encourage, and engage youth, and (c) intentionally fostering youth experiences of skill development, social interaction, and pride in accomplishment. In contrast to the novices, experts displayed a more holistic perspective and paid attention to higher-order issues such as providing opportunities and enabling youth. The findings indicate how RILS service providers work to create a program atmosphere and employ strategies to intentionally foster particular youth experiences. The findings explicate service providers' theories of practice, the intentional design of RILS program environments to bring about client change, and the value of service provider expertise. Implications for Rehabilitation Service providers of youth independence-oriented life skills programs can intentionally create a learning-oriented and supportive program atmosphere by using non-directive, coaching/guiding, and engagement strategies Youth experiences of skill development, shared experience with others, and pride in accomplishment can be cultivated by providing a range of learning opportunities, including choice making, problem-solving, and skill mastery Compared to more novice service providers, experts discussed managing the

Impact of landfill liner time-temperature history on the service life of HDPE geomembranes.

Science.gov (United States)

Rowe, R Kerry; Islam, M Z

2009-10-01

The observed temperatures in different landfills are used to establish a number of idealized time-temperature histories for geomembrane liners in municipal solid waste (MSW) landfills. These are then used for estimating the service life of different HDPE geomembranes. The predicted antioxidant depletion times (Stage I) are between 7 and 750 years with the large variation depending on the specific HDPE geomembrane product, exposure conditions, and most importantly, the magnitude and duration of the peak liner temperature. The higher end of the range corresponds to data from geomembranes aged in simulated landfill liner tests and a maximum liner temperature of 37 degrees C. The lower end of the range corresponds to a testing condition where geomembranes were immersed in a synthetic leachate and a maximum liner temperature of 60 degrees C. The total service life of the geomembranes was estimated to be between 20 and 3300 years depending on the time-temperature history examined. The range illustrates the important role that time-temperature history could play in terms of geomembrane service life. The need for long-term monitoring of landfill liner temperature and for geomembrane ageing studies that will provide improved data for assessing the likely long-term performance of geomembranes in MSW landfills are highlighted.

Methodologies for assessment of the service life of pressure tubes in Indian PHWRs

International Nuclear Information System (INIS)

Sinha, R.K.; Sharma, A.; Madhusoodanan, K.; Sinha, S.K.; Malshe, U.D.

1997-01-01

For estimating safe service life of pressure tubes in Indian PHWRs, analytical methodologies have been developed to evaluate creep deformation, deuterium pick-up rate, blister growth at cold spot, and operating domain required for achieving leak-before-break. The paper provides an overview of these methodologies, and results of some studies carried out towards evolution of proposed fitness-for-service criteria for a pressure tube in contact with its calandria tube. (author)

Recreation as a Related Service: Focusing on the Quality of Life of Students with Disabilities

Science.gov (United States)

Diodati, Melissa R.

2017-01-01

Leisure participation is influential on the quality of life of individuals. Individuals with disabilities can face barriers in leisure participation, impacting their quality of life. IDEA (2004) recognizes recreation as a related service as one way to enhance the leisure experiences for students with disabilities. The purpose of this embedded case…

A generally applicable lightweight method for calculating a value structure for tools and services in bioinformatics infrastructure projects.

Science.gov (United States)

Mayer, Gerhard; Quast, Christian; Felden, Janine; Lange, Matthias; Prinz, Manuel; Pühler, Alfred; Lawerenz, Chris; Scholz, Uwe; Glöckner, Frank Oliver; Müller, Wolfgang; Marcus, Katrin; Eisenacher, Martin

2017-10-30

Sustainable noncommercial bioinformatics infrastructures are a prerequisite to use and take advantage of the potential of big data analysis for research and economy. Consequently, funders, universities and institutes as well as users ask for a transparent value model for the tools and services offered. In this article, a generally applicable lightweight method is described by which bioinformatics infrastructure projects can estimate the value of tools and services offered without determining exactly the total costs of ownership. Five representative scenarios for value estimation from a rough estimation to a detailed breakdown of costs are presented. To account for the diversity in bioinformatics applications and services, the notion of service-specific 'service provision units' is introduced together with the factors influencing them and the main underlying assumptions for these 'value influencing factors'. Special attention is given on how to handle personnel costs and indirect costs such as electricity. Four examples are presented for the calculation of the value of tools and services provided by the German Network for Bioinformatics Infrastructure (de.NBI): one for tool usage, one for (Web-based) database analyses, one for consulting services and one for bioinformatics training events. Finally, from the discussed values, the costs of direct funding and the costs of payment of services by funded projects are calculated and compared. © The Author 2017. Published by Oxford University Press.

Calculating disability-adjusted life years (DALY) as a measure of excess cancer risk following radiation exposure

International Nuclear Information System (INIS)

Shimada, K; Kai, M

2015-01-01

This paper has proposed that disability-adjusted life year (DALY) can be used as a measure of radiation health risk. DALY is calculated as the sum of years of life lost (YLL) and years lived with disability (YLD). This multidimensional concept can be expressed as a risk index without a probability measure to avoid the misuse of the current radiation detriment at low doses. In this study, we calculated YLL and YLD using Japanese population data by gender. DALY for all cancers in Japan per 1 Gy per person was 0.84 year in men and 1.34 year in women. The DALY for all cancers in the Japanese baseline was 4.8 in men and 3.5 in women. When we calculated the ICRP detriment from the same data, DALYs for the cancer sites were similar to the radiation detriment in the cancer sites, excluding leukemia, breast and thyroid cancer. These results suggested that the ICRP detriment overestimate the weighting fraction of leukemia risk and underestimate the weighting fraction of breast and thyroid cancer. A big advantage over the ICRP detriment is that DALY can calculate the risk components for non-fatal diseases without the data of lethality. This study showed that DALY is a practical tool that can compare many types of diseases encountered in public health. (paper)

Flexible pavement rehabilitation design based on pavement service life time span left

OpenAIRE

Gamelyak, I.; Shevchuk, V.

2005-01-01

The design of flexible pavement rehabilitation is analysed in terms of durability-cost. A notion of the remaining service life span is described. the model of rehabilitation strategy selection is presented for both design project and operation stages. the results can be used in the pavement management system.

Purchasing motors in the light of full-cost calculation; Beschaffung von Motoren unter der Vollkostenbetrachtung

Energy Technology Data Exchange (ETDEWEB)

Mauchle, P.; Schnyder, G.

2006-07-01

This final report published by the Swiss Federal Office of Energy (SFOE) presents the results of a study made on how full-cost calculation can help define the optimal purchasing strategy for electrical drives. According to the authors, taking total life-cycle costs into consideration also guarantees economical operation and helps avoid unexpected service costs. The report describes the goals of the project and co-operation with industry and users. Factors influencing life-cycle costs are looked at in detail, including investments, installation and operator-training, operation and monitoring as well as maintenance and repair. Also, energy costs are looked at, as are environmental aspects and the disposal of drives taken out of service. The calculation of the economic feasibility of two types of motor is looked at. Sample Calls for Tender are presented and software for the evaluation of offers is briefly discussed.

Child life services.

Science.gov (United States)

Wilson, Jerriann M

2006-10-01

Child life programs have become standard in most large pediatric centers and even on some smaller pediatric inpatient units to address the psychosocial concerns that accompany hospitalization and other health care experiences. The child life specialist focuses on the strengths and sense of well-being of children while promoting their optimal development and minimizing the adverse effects of children's experiences in health care or other potentially stressful settings. Using play and psychological preparation as primary tools, child life interventions facilitate coping and adjustment at times and under circumstances that might prove overwhelming otherwise. Play and age-appropriate communication may be used to (1) promote optimal development, (2) present information, (3) plan and rehearse useful coping strategies for medical events or procedures, (4) work through feelings about past or impending experiences, and (5) establish therapeutic relationships with children and parents to support family involvement in each child's care, with continuity across the care continuum. The benefits of this collaborative work with the family and health care team are not limited to the health care setting; it may also optimize reintegration into schools and the community.

Family Quality of Life: A Key Outcome in Early Childhood Intervention Services--A Scoping Review

Science.gov (United States)

Bhopti, Anoo; Brown, Ted; Lentin, Primrose

2016-01-01

A scoping review was conducted to identify factors influencing the quality of life of families of children with disability. The review also explored the scales used to measure family quality of life (FQOL) as an outcome in early childhood intervention services (ECIS). Multiple databases were searched from 2000 to 2013 to include studies pertinent…

Quality of life evaluation of workers for diagnostic radiology services

International Nuclear Information System (INIS)

Fernandes, Ivani Martins

2011-01-01

The main objective of this study was to evaluate the quality of life (QOL) of diagnostic radiology services workers at a hospital of Sao Paulo city. It aimed also to draw the profile of these workers identifying the variables, as its influence on their quality of life. A descriptive exploratory study with qualitative and quantitative approaches was carried out. The data were collected using the questionnaires: the abbreviated instrument for the assessment of the QOL, World Health Organization Quality of Life Instrument bref (WHOQOL-bref) and a questionnaire including the social demographic variables, work conditions and the variables that express the lifestyle of individuals, both questionnaires self-applied. The sample was formed by 118 workers, among them: physicians, technologists/technicians in radiology, nurses, technicians and assistants in nursing, and others health professionals. The data analysis included descriptive statistics, nonparametric tests and the use of a linear regression model. The reliability of the instrument for the studied sample was verified by Cronbach's Alpha Coefficient (α). The WHOQOL-bref proved to be an adequate instrument, with a good level of internal consistency (α=0.884), being easily and quickly administrated for the evaluation of the QOL. The study provided an overview of the perception of quality of life of the studied group. (author)

Life Expectancies Applied to Specific Statuses: a History of the Indicators and the Methods of Calculation {Population, 3, 1998)

OpenAIRE

N. Brouard; J.-M. Robine; E. Cambois

1999-01-01

Cambois (Emmanuelle), Robin? (Jean-Marie), Brouard (Nicolas).- Life Expectancies Applied to Specific Statuses: A History of the Indicators and the Methods of Calculation Indicators of life expectancy applied to specific statuses, such as the state of health or professional status, were introduced at the end of the 1930s and are currently the object of renewed interest. Because they relate mortality to different domains (health, professional activity) applied life expectancies reflect simultan...

Leveraging Available Data to Support Extension of Transportation Packages Service Life

Energy Technology Data Exchange (ETDEWEB)

Dunn, K.; Abramczyk, G.; Bellamy, S.; Daugherty, W.; Hackney, B.; Hoffman, E.; Skidmore, E.; Stefek, T.

2012-06-12

Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

Leveraging Available Data to Support Extension of Transportation Packages Service Life

International Nuclear Information System (INIS)

Dunn, K.; Abramczyk, G.; Bellamy, S.; Daugherty, W.; Hackney, B.; Hoffman, E.; Skidmore, E.; Stefek, T.

2012-01-01

Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

[Calculation on ecological security baseline based on the ecosystem services value and the food security].

Science.gov (United States)

He, Ling; Jia, Qi-jian; Li, Chao; Xu, Hao

2016-01-01

The rapid development of coastal economy in Hebei Province caused rapid transition of coastal land use structure, which has threatened land ecological security. Therefore, calculating ecosystem service value of land use and exploring ecological security baseline can provide the basis for regional ecological protection and rehabilitation. Taking Huanghua, a city in the southeast of Hebei Province, as an example, this study explored the joint point, joint path and joint method between ecological security and food security, and then calculated the ecological security baseline of Huanghua City based on the ecosystem service value and the food safety standard. The results showed that ecosystem service value of per unit area from maximum to minimum were in this order: wetland, water, garden, cultivated land, meadow, other land, salt pans, saline and alkaline land, constructive land. The order of contribution rates of each ecological function value from high to low was nutrient recycling, water conservation, entertainment and culture, material production, biodiversity maintenance, gas regulation, climate regulation and environmental purification. The security baseline of grain production was 0.21 kg · m⁻², the security baseline of grain output value was 0.41 yuan · m⁻², the baseline of ecosystem service value was 21.58 yuan · m⁻², and the total of ecosystem service value in the research area was 4.244 billion yuan. In 2081 the ecological security will reach the bottom line and the ecological system, in which human is the subject, will be on the verge of collapse. According to the ecological security status, Huanghua can be divided into 4 zones, i.e., ecological core protection zone, ecological buffer zone, ecological restoration zone and human activity core zone.

Techno-Economic Analysis of BEV Service Providers Offering Battery Swapping Services

Energy Technology Data Exchange (ETDEWEB)

Neubauer, J. S.; Pesaran, A.

2013-01-01

Battery electric vehicles (BEVs) offer the potential to reduce both oil imports and greenhouse gas emissions, but high upfront costs, battery-limited vehicle range, and concern over high battery replacement costs may discourage potential buyers. A subscription model in which a service provider owns the battery and supplies access to battery swapping infrastructure could reduce upfront and replacement costs for batteries with a predictable monthly fee, while expanding BEV range. Assessing the costs and benefits of such a proposal are complicated by many factors, including customer drive patterns, the amount of required infrastructure, battery life, etc. The National Renewable Energy Laboratory has applied its Battery Ownership Model to compare the economics and utility of BEV battery swapping service plan options to more traditional direct ownership options. Our evaluation process followed four steps: (1) identifying drive patterns best suited to battery swapping service plans, (2) modeling service usage statistics for the selected drive patterns, (3) calculating the cost-of-service plan options, and (4) evaluating the economics of individual drivers under realistically priced service plans. A service plan option can be more cost-effective than direct ownership for drivers who wish to operate a BEV as their primary vehicle where alternative options for travel beyond the single-charge range are expensive, and a full-coverage-yet-cost-effective regional infrastructure network can be deployed. However, when assumed cost of gasoline, tax structure, and absence of purchase incentives are factored in, our calculations show the service plan BEV is rarely more cost-effective than direct ownership of a conventional vehicle.

Shift work to balance everyday life - a salutogenic nursing perspective in home help service in Sweden.

Science.gov (United States)

Agosti, Madelaine Törnquist; Andersson, Ingemar; Ejlertsson, Göran; Janlöv, Ann-Christin

2015-01-01

Nurses in Sweden have a high absence due to illness and many retire before the age of sixty. Factors at work as well as in private life may contribute to health problems. To maintain a healthy work-force there is a need for actions on work-life balance in a salutogenic perspective. The aim of this study was to explore perceptions of resources in everyday life to balance work and private life among nurses in home help service. Thirteen semi-structured individual interviews and two focus group interviews were conducted with home help service nurses in Sweden. A qualitative content analysis was used for the analyses. In the analyses, six themes of perceptions of recourses in everyday life emerged; (i) Reflecting on life. (ii) Being healthy and taking care of yourself. (iii) Having a meaningful job and a supportive work climate. (iv) Working shifts and part time. (v) Having a family and a supporting network. (vi) Making your home your castle. The result points out the complexity of work-life balance and support that the need for nurses to balance everyday life differs during different phases and transitions in life. In this salutogenic study, the result differs from studies with a pathogenic approach. Shift work and part time work were seen as two resources that contributed to flexibility and a prerequisite to work-life balance. To have time and energy for both private life and work was seen as essential. To reflect on and discuss life gave inner strength to set boundaries and to prioritize both in private life and in work life. Managers in nursing contexts have a great challenge to maintain and strengthen resources which enhance the work-life balance and health of nurses. Salutogenic research is needed to gain an understanding of resources that enhance work-life balance and health in nursing contexts.

A Model for Calculated Privacy and Trust in pHealth Ecosystems.

Science.gov (United States)

Ruotsalainen, Pekka; Blobel, Bernd

2018-01-01

A pHealth ecosystem is a community of service users and providers. It is also a dynamic socio-technical system. One of its main goals is to help users to maintain their personal health status. Another goal is to give economic benefit to stakeholders which use personal health information existing in the ecosystem. In pHealth ecosystems, a huge amount of health related data is collected and used by service providers such as data extracted from the regulated health record and information related to personal characteristics, genetics, lifestyle and environment. In pHealth ecosystems, there are different kinds of service providers such as regulated health care service providers, unregulated health service providers, ICT service providers, researchers and industrial organizations. This fact together with the multidimensional personal health data used raises serious privacy concerns. Privacy is a necessary enabler for successful pHealth, but it is also an elastic concept without any universally agreed definition. Regardless of what kind of privacy model is used in dynamic socio-technical systems, it is difficult for a service user to know the privacy level of services in real life situations. As privacy and trust are interrelated concepts, the authors have developed a hybrid solution where knowledge got from regulatory privacy requirements and publicly available privacy related documents is used for calculation of service providers' specific initial privacy value. This value is then used as an estimate for the initial trust score. In this solution, total trust score is a combination of recommended trust, proposed trust and initial trust. Initial privacy level is a weighted arithmetic mean of knowledge and user selected weights. The total trust score for any service provider in the ecosystem can be calculated deploying either a beta trust model or the Fuzzy trust calculation method. The prosed solution is easy to use and to understand, and it can be also automated. It is

Computational Chemistry Laboratory: Calculating the Energy Content of Food Applied to a Real-Life Problem

Science.gov (United States)

Barbiric, Dora; Tribe, Lorena; Soriano, Rosario

2015-01-01

In this laboratory, students calculated the nutritional value of common foods to assess the energy content needed to answer an everyday life application; for example, how many kilometers can an average person run with the energy provided by 100 g (3.5 oz) of beef? The optimized geometries and the formation enthalpies of the nutritional components…

Laser shock peening of steam turbine blade for enhanced service life

Indian Academy of Sciences (India)

2014-02-13

Feb 13, 2014 ... study to develop indigenous LSP process for enhanced service life ... DINX10Cr- 0.08–0.13 11.5–12.5 2.2–2.8 0.1–0.5 1.6–1.8 0.6–0.9 0.25–0.4 Balance ... LSP is done by scanning the taped surface of the work piece with a ...

The relationship between health literacy and quality of life among frequent users of health care services: a cross-sectional study.

Science.gov (United States)

Couture, Éva Marjorie; Chouinard, Maud-Christine; Fortin, Martin; Hudon, Catherine

2017-07-06

Although health literacy and quality of life are important concepts in health care, the link between them is unclear, especially for a population of frequent users of health care services with chronic diseases. Low health literacy is a common problem that has been linked to several negative health outcomes. Quality of life is an important health outcome in patient-centered care. Frequent users of health care services are a vulnerable population that deserves attention due to high costs and negative outcomes such as lower quality of life and higher mortality. The objective of this study was to examine the relationship between health literacy and the physical and mental components of quality of life among frequent users of health care services with chronic diseases. This study presents the cross-sectional analysis of data collected through the V1SAGES project, a randomized controlled trial on the effectiveness of a case management intervention in primary care in Quebec, Canada. Participants (n = 247) were frequent users of health care services presenting at least one chronic condition. Health literacy was measured by the Newest Vital Sign (NVS), and the physical and mental components of quality of life were evaluated by the Short Form Health Survey Version 2 (SF-12v2). The association between health literacy (independent variable) and the physical and mental components of quality of life was examined using biserial correlation. No association was found between health literacy and quality of life (physical component: r = 0.108, ρ = 0.11; mental component: r = 0.147, ρ = 0.15). This study suggests that there is no relationship between health literacy and the physical and mental components of quality of life among frequent users of health care services. NCT01719991 . Registered October 25, 2012.

Prediction of pavement remaining service life based on repetition of load and permanent deformation

Science.gov (United States)

Usman, R. S.; Setyawan, A.; Suprapto, M.

2018-03-01

One of the methods which was applied in the assessment of flexible pavement performance was mechanistic method assuming structures of road pavement to become multi-layer structure for flexible pavement, that the vehicle load working on the pavement layer under repetition with power failure worth 1 (one) unit which was assumed as evenly distributed static load, and therefore the pavement material would provide response in the form of stress, strain, and deflection. This is closely related in order to assess the structure of flexible pavement and to predict the remaining service life on the roads of Pulau Indah sta 0 + 000 to sta. 0 + 845 in Kota Kupang, Nusa Tenggara Timur. The performance appraisal indicator which was used was fatigue cracking happening bottom of the asphalt layer and permanent deformation (rutting) on the surface of subgrade. The strain estimate on the flexible pavement layer structure needs carefulness and high accuracy and therefore a software like KENPAVE which produces horizontal tensile strain of 8,802E-05 and vertical compressive strain of 2,642E-04 was used. By applying equation of The Asphalt Instituteit was obtained repetition of permit load when reaching fatigue cracking (Nf) was 16.071.516 ESAL and permanent deformation (rutting) was 14.703.867 ESAL and also it was predicted the remaining service life of pavement applied the equation of AASTHO 1993 by considering Traffic Multiplier factor (TM 1.8, TM 1.9 and TM 2.0) obtained the remaining life service due to fatigue of 5.51% in the year of 13th (TM 1.8), 7.95% in the year of12th (TM 1.9) and 3.11% (TM 2.0) in the year of 12th, also the remaining service life due to rutting of 4.69% in the year of 12th(TM 1.8), 7.79% in the year of 11th (TM 1.9), and 2.94 in the year of 11th (TM 2.0).

Life cycle costing of waste management systems: Overview, calculation principles and case studies

DEFF Research Database (Denmark)

Martinez Sanchez, Veronica; Kromann, Mikkel A.; Astrup, Thomas Fruergaard

2015-01-01

This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within...... regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental impacts and the coverage of shadow prices, and there was also significant confusion regarding...

Associations of Quality of Life with Service Satisfaction in Psychotic Patients: A Meta-Analysis

Science.gov (United States)

Petkari, Eleni; Pietschnig, Jakob

2015-01-01

Background Quality of life (QoL) has gained increasing attention as a desired outcome of psychosocial treatments targeting psychotic patients. Yet, the relationship between the patients’ satisfaction with services and QoL has not been clearly established, perhaps due to the multidimensionality of the QoL concept and the variability in its assessment. Aim This is the first systematic meta-analysis of all available evidence assessing the relationship between QoL and service satisfaction. Methods: In all, 19 studies reporting data of 21 independent samples (N = 5,337) were included in the present meta-analysis. In moderator analyses, effects of age, sex, diagnoses (schizophrenia vs. other psychoses), treatment context (inpatients vs. outpatients), study design (cross-sectional vs. longitudinal), and QoL domain (subjective vs. health-related) were examined. Results Analyses revealed a highly significant medium-sized effect (r = .30, p service satisfaction. Effect sizes were significantly stronger for subjective than health-related quality of life (r = .35 vs. r = .14, respectively). Moreover, associations with subjective QoL remained largely robust when accounting for moderating variables, although there was a trend of stronger associations for outpatients compared to inpatients. In contrast, effect sizes for health-related QoL were small and only observable for samples with longitudinal designs. Conclusion Associations between QoL and service satisfaction appear to be robust but are differentiated in regard to QoL domain. Our findings suggest that agents responsible for service design and implementation need to take the patients’ perception of the service adequacy for achieving QoL enhancement into account. PMID:26275139

Shift work to balance everyday life - a salutogenic nursing perspective in home help service in Sweden

OpenAIRE

Agosti, Madelaine T?rnquist; Andersson, Ingemar; Ejlertsson, G?ran; Janl?v, Ann-Christin

2015-01-01

Background: Nurses in Sweden have a high absence due to illness and many retire before the age of sixty. Factors at work as well as in private life may contribute to health problems. To maintain a healthy work–force there is a need for actions on work-life balance in a salutogenic perspective. The aim of this study was to explore perceptions of resources in everyday life to balance work and private life among nurses in home help service. Methods: Thirteen semi-structured individual interviews...

Citizen and Resident Satisfaction with Public Services in Qatar : And the impact on quality of life

OpenAIRE

Benmansour, Nada Abdelkader , [بن منصور، ندى عبد القادر

2016-01-01

In Qatar notable differences in public service satisfaction exist across individual state services, across nationality groupings, and across demographic categories. Among all citizens and residents, however, there is an empirical link between satisfaction with state services and overall perceptions of quality of life. Policymakers should thus study efforts to collect regular and systematic data on the performance of key public institutions, including through the collection of consumer feedbac...

Techno-Economic Analysis of BEV Service Providers Offering Battery Swapping Services: Preprint

Energy Technology Data Exchange (ETDEWEB)

Neubauer, J.; Pesaran, A.

2013-03-01

Battery electric vehicles (BEVs) offer the potential to reduce both oil imports and greenhouse gas emissions, but high upfront costs, battery-limited vehicle range, and concern over high battery replacement costs may discourage potential buyers. A subscription model in which a service provider owns the battery and supplies access to battery swapping infrastructure could reduce upfront and replacement costs for batteries with a predictable monthly fee, while expanding BEV range. Assessing the costs and benefits of such a proposal are complicated by many factors, including customer drive patterns, the amount of required infrastructure, battery life, etc. The National Renewable Energy Laboratory has applied its Battery Ownership Model to compare the economics and utility of BEV battery swapping service plan options to more traditional direct ownership options. Our evaluation process followed four steps: (1) identifying drive patterns best suited to battery swapping service plans, (2) modeling service usage statistics for the selected drive patterns, (3) calculating the cost-of-service plan options, and (4) evaluating the economics of individual drivers under realistically priced service plans. A service plan option can be more cost-effective than direct ownership for drivers who wish to operate a BEV as their primary vehicle where alternative options for travel beyond the single-charge range are expensive, and a full-coverage-yet-cost-effective regional infrastructure network can be deployed. However, when assumed cost of gasoline, tax structure, and absence of purchase incentives are factored in, our calculations show the service plan BEV is rarely more cost-effective than direct ownership of a conventional vehicle.

Remediating cultural services in Second Life: The case of Info Island DK

DEFF Research Database (Denmark)

Heilesen, Simon

2009-01-01

In 2007, Info Island DK was created as a virtual library in Second Life. This is an account of how library services of the physical library and the net library were remediated into a 3-D virtual world. The Info Island DK library was not widely adopted by any of the intended target groups, even if...

Integrating mental health services into primary HIV care for women: the Whole Life project.

OpenAIRE

Dodds, Sally; Nuehring, Elane M.; Blaney, Nancy T.; Blakley, Theresa; Lizzotte, Jean-Marie; Lopez, Myriam; Potter, JoNell E.; O'Sullivan, Mary J.

2004-01-01

The high rate of mental health problems in HIV-infected women jeopardizes the health of this vulnerable population, and constitutes a mandate for integrating mental health services into HIV primary care. The Whole Life project-a collaboration of the departments of Psychiatry and Obstetrics/Gynecology at the University of Miami School of Medicine-successfully integrated mental health services into primary HIV care for women. This article describes the conceptual framework of the integration, i...

Second life battery energy storage system for residential demand response service

DEFF Research Database (Denmark)

Saez-de-Ibarra, Andoni; Martinez-Laserna, Egoitz; Koch-Ciobotaru, Cosmin

2015-01-01

vehicles, during their main first life application, for providing residential demand response service. The paper considers the decayed characteristics of these batteries and optimizes the rating of such a second life battery energy storage system (SLBESS) for maximizing the economic benefits of the user......The integration of renewable energies and the usage of battery energy storage systems (BESS) into the residential buildings opens the possibility for minimizing the electricity bill for the end-user. This paper proposes the use of batteries that have already been aged while powering electric......'s energy consumption during a period of one year. Furthermore, simulations were performed considering real data of PV generation, consumption, prices taken from the Spanish market and costs of battery and photovoltaic systems....

Web servers and services for electrostatics calculations with APBS and PDB2PQR

Science.gov (United States)

Unni, Samir; Huang, Yong; Hanson, Robert; Tobias, Malcolm; Krishnan, Sriram; Li, Wilfred W.; Nielsen, Jens E.; Baker, Nathan A.

2011-01-01

APBS and PDB2PQR are widely utilized free software packages for biomolecular electrostatics calculations. Using the Opal toolkit, we have developed a Web services framework for these software packages that enables the use of APBS and PDB2PQR by users who do not have local access to the necessary amount of computational capabilities. This not only increases accessibility of the software to a wider range of scientists, educators, and students but it also increases the availability of electrostatics calculations on portable computing platforms. Users can access this new functionality in two ways. First, an Opal-enabled version of APBS is provided in current distributions, available freely on the web. Second, we have extended the PDB2PQR web server to provide an interface for the setup, execution, and visualization electrostatics potentials as calculated by APBS. This web interface also uses the Opal framework which ensures the scalability needed to support the large APBS user community. Both of these resources are available from the APBS/PDB2PQR website: http://www.poissonboltzmann.org/. PMID:21425296

Raw material consumption of the European Union--concept, calculation method, and results.

Science.gov (United States)

Schoer, Karl; Weinzettel, Jan; Kovanda, Jan; Giegrich, Jürgen; Lauwigi, Christoph

2012-08-21

This article presents the concept, calculation method, and first results of the "Raw Material Consumption" (RMC) economy-wide material flow indicator for the European Union (EU). The RMC measures the final domestic consumption of products in terms of raw material equivalents (RME), i.e. raw materials used in the complete production chain of consumed products. We employed the hybrid input-output life cycle assessment method to calculate RMC. We first developed a highly disaggregated environmentally extended mixed unit input output table and then applied life cycle inventory data for imported products without appropriate representation of production within the domestic economy. Lastly, we treated capital formation as intermediate consumption. Our results show that services, often considered as a solution for dematerialization, account for a significant part of EU raw material consumption, which emphasizes the need to focus on the full production chains and dematerialization of services. Comparison of the EU's RMC with its domestic extraction shows that the EU is nearly self-sufficient in biomass and nonmetallic minerals but extremely dependent on direct and indirect imports of fossil energy carriers and metal ores. This implies an export of environmental burden related to extraction and primary processing of these materials to the rest of the world. Our results demonstrate that internalizing capital formation has significant influence on the calculated RMC.

POPCYCLE: a computer code for calculating nuclear and fossil plant levelized life-cycle power costs

International Nuclear Information System (INIS)

Hardie, R.W.

1982-02-01

POPCYCLE, a computer code designed to calculate levelized life-cycle power costs for nuclear and fossil electrical generating plants is described. Included are (1) derivations of the equations and a discussion of the methodology used by POPCYCLE, (2) a description of the input required by the code, (3) a listing of the input for a sample case, and (4) the output for a sample case

Influence of coating quality on the service life of land-based gas turbine blades

Energy Technology Data Exchange (ETDEWEB)

Cheruvu, N.S. [Southwest Research Institute, San Antonio (United States)

2007-06-15

The land-based gas turbine blades operate at severe operating conditions: higher metal temperatures and stresses, and severe duty cycles. Metallic coatings with or without a top ceramic coating have been used to protect the turbine blades. The durability of the coating system is one of the prime life-limiting factors of modem gas turbine blades. The quality of the coating plays a critical role on the coating life. This paper discusses the failure mechanisms of the coatings and describes how the quality of the coating affects the service life of a gas turbine blade. A few case studies are presented in the paper. (orig.)

The Efficacy of Psychosocial Occupational Therapy Services on Quality of life of Chronic Pschiatric Patents

Directory of Open Access Journals (Sweden)

Elaheh Hojjati-Abed

2010-04-01

Full Text Available Objective: Quality of life has recently been recognized as an important goal of health care in psychiatry. In this study quality of life of chronic psychiatric patients was evaluated after psychosocial occupational therapy interventions. Materials & Methods: This study is interventional and quasi experimental. Twoenty four chronic mental patients who had refered to SINA Daily Center as intervention group and fifty chronic mental patients as control group were selected by simle and convenient sampling. The instrument was Wisconsin Quality of Life Client Questionnaire that included 8 subscales. Occupational therapy services consisting group therapy, activity therapy and art therapy, according to center’ plane, were performed during 3 months (2 times in week, 90 minutes in each session for intervention group. Independent T test & Paired T test were used for data analysis. Results: There was no significant difference between two groups in parts of QOL before intervention, but after intervention, significant differences were observed in mean scores of satisfaction level, occupational activities, psychological well–being, physical health and total quality o life (P<0.001, also social relation (P=0.005 and economic situation (P=0.003.There was no significant difference between two group in symptoms (P=0.277 and activity of daily living (P=0.020 after intervention. Conclusion: Psychosocial occupational therapy services are effective on satisfaction level and quality of life of chronic psychiatric patients.

Group Life Insurance

CERN Multimedia

2013-01-01

The CERN Administration would like to remind you that staff members and fellows have the possibility to take out a life insurance contract on favourable terms through a Group Life Insurance.   This insurance is provided by the company Helvetia and is available to you on a voluntary basis. The premium, which varies depending on the age and gender of the person insured, is calculated on the basis of the amount of the death benefit chosen by the staff member/fellow and can be purchased in slices of 10,000 CHF.    The contract normally ends at the retirement age (65/67 years) or when the staff member/fellow leaves the Organization. The premium is deducted monthly from the payroll.   Upon retirement, the staff member can opt to maintain his membership under certain conditions.   More information about Group Life Insurance can be found at: Regulations (in French) Table of premiums The Pension Fund Benefit Service &...

Place of Death and Use of Health Services in the Last Year of Life

OpenAIRE

Grande, Gunn E.; McKerral, Angela; Addington-Hall, Julia M.; Todd, Chris J.

2003-01-01

Aim: To investigate whether health service input in the last year of life differs between cancer patients who die at home versus those dying in inpatient care. Methods: Post hoc exploratory case-control study of 127 home deaths and 200 inpatient deaths. Retrospective electronic record linkage of patients' community and inpatient care during the last year of life. Results: Patients who died at home began their home nursing care closer to death than those who died as inpatients. Their first con...

20 CFR 1002.267 - How is compensation during the period of service calculated in order to determine the employee's...

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How is compensation during the period of service calculated in order to determine the employee's pension benefits, if benefits are based on compensation? 1002.267 Section 1002.267 Employees' Benefits OFFICE OF THE ASSISTANT SECRETARY FOR VETERANS' EMPLOYMENT AND TRAINING SERVICE, DEPARTMENT OF...

Some principles of service life calculation of reinforcements and in situ corrosion monitoring by sensors in the radioactive waste containers of El Cabril disposal (Spain)

International Nuclear Information System (INIS)

Andrade, C.; Martinez, I.; Castellote, M.; Zuloaga, P.

2006-01-01

Reinforced concrete is the most usual material used in engineered barriers in low-level nuclear waste disposal facilities. The record of modern concrete is no longer than about 100 years. During this time, it has been noticed that the material gives a good performance in many environments, however several chemical aggressive species in water, soil or the atmosphere may react with the cement mineralogical phases and perturb its integrity. El Cabril repository has a design life objective of longer than 300 years and therefore, these structures should maintain their main characteristics during this target service life. The potential aggressive conditions that the cement-based materials can suffer have been identified to be: carbonation, water permeation (leaching) and reinforcement corrosion. More unlikely may be the biological attack. Chlorides are not in the environment but they are inside the drums as part of analytical wastes. Vaults and containers are made of a very similar concrete composition while the mortar is specifically designed to be pumpable, with low hydration heat, low shrinkage and of low permeability. In this paper results of concrete characteristics are given as well as the monitoring of the behaviour of reinforcement corrosion parameters from 1995 on the same environmental conditions of the actual waste. This monitoring has been made in a buried structure with embedded sensors. The effect of temperature is commented

Childhood adverse life events, disordered eating, and body mass index in US Military service members.

Science.gov (United States)

Bakalar, Jennifer L; Barmine, Marissa; Druskin, Lindsay; Olsen, Cara H; Quinlan, Jeffrey; Sbrocco, Tracy; Tanofsky-Kraff, Marian

2018-03-02

US service members appear to be at high-risk for disordered eating. Further, the military is experiencing unprecedented prevalence of overweight and obesity. US service members also report a high prevalence of childhood adverse life event (ALE) exposure. Despite consistent links between early adversity with eating disorders and obesity, there is a dearth of research examining the association between ALE exposure and disordered eating and weight in military personnel. An online survey study was conducted in active duty personnel to examine childhood ALE history using the Life Stressor Checklist - Revised, disordered eating using the Eating Disorder Examination - Questionnaire total score, and self-reported body mass index (BMI, kg/m 2 ). Among 179 respondents, multiple indices of childhood ALE were positively associated with disordered eating. Traumatic childhood ALE and subjective impact of childhood ALE were associated with higher BMI and these associations were mediated by disordered eating. Findings support evaluating childhood ALE exposure among service members with disordered eating and weight concerns. Moreover, findings support the need for prospective research to elucidate these relationships. © 2018 Wiley Periodicals, Inc.

Calculation of chemical elimination half-life from blood with an ongoing exposure source: the example of perfluorooctanoic acid (PFOA).

Science.gov (United States)

Russell, Mark H; Waterland, Robert L; Wong, Fiona

2015-06-01

Determination of the chemical clearance rate from human blood is a critical component of toxicokinetic exposure assessment. Analysis of temporal biomonitoring data without consideration of ongoing exposure results in calculation of apparent elimination half-life values that are longer than the intrinsic value. The intrinsic elimination half-life is solely a function of the rate of elimination while the apparent elimination half-life reflects the processes of both elimination and ongoing exposure. Confusion between intrinsic and apparent half-life values can lead to misinterpretation of biomonitoring data and can result in exaggerated predictions in subsequent modeling efforts. This work provides a review of the first-order equations that have been developed to calculate intrinsic and apparent half-life values and the potential bias that can result from confusing these two values. Published human biomonitoring data for perfluorooctanoic acid (PFOA) are analyzed using these equations to provide examples of low, medium and high bias in determination of the intrinsic elimination half-life from plasma or serum, the components of blood typically analyzed for PFOA. An approach is also provided to estimate the extent of exposure reduction that is indicated by declining longitudinal or cross-sectional biomonitoring data. Based on the evaluation methodology presented in this work, the intrinsic elimination half-life of PFOA in humans is 2.4years, representing the average of independent estimates of 2.5years (95% CI, 2.4-2.7) and 2.3years (95% CI, 2.1-2.4). The declining concentration of PFOA in blood of the general USA adult population represents an estimated exposure reduction of 20-30% over the period 1999-2008. Copyright © 2014 Elsevier Ltd. All rights reserved.

Pre-Service Science Teachers' Views of the Ecological Footprint: The Starting-Points of Sustainable Living

Science.gov (United States)

Keles, Ozgul; Aydogdu, Mustafa

2010-01-01

In this study, pre-service science teachers' opinions about the concept of the ecological footprint were investigated before and after activities about sustainable life and their ecological footprints were calculated. A total of 49 pre-service science teachers (31 male, 18 female) who attend third class in the science education department…

Services and Supports, Partnership, and Family Quality of Life: Focus on Deaf-Blindness

Science.gov (United States)

Kyzar, Kathleen B.; Brady, Sara E.; Summers, Jean Ann; Haines, Shana J.; Turnbull, Ann P.

2016-01-01

In this study, the authors examined the moderating effects of partnership on the relationship between services and supports adequacy and family quality of life (FQOL) for families of children with deaf-blindness ages birth to 21. A social-ecological approach enabled examining the impact of disability on the family system. A survey, consisting of…

Lifetime health effects and medical costs of integrated stroke services - a non-randomized controlled cluster-trial based life table approach

Directory of Open Access Journals (Sweden)

Dirks Maaike

2010-11-01

Full Text Available Abstract Background Economic evaluation of stroke services indicates that such services may lead to improved quality of life at affordable cost. The present study assesses lifetime health impact and cost consequences of stroke in an integrated service setting. Methods The EDISSE study is a prospective non-randomized controlled cluster trial that compared stroke services (n = 151 patients to usual care (n = 187 patients. Health status and cost trial-data were entered in multi-dimensional stroke life-tables. The tables distinguish four levels of disability which are defined by the modified Rankin scale. Quality-of-life scores (EuroQoL-5D, transition and survival probabilities are based on concurrent Dutch follow-up studies. Outcomes are quality-adjusted life years lived and lifetime medical cost by disability category. An economic analysis compares outcomes from a successful stroke service to usual care, by bootstrapping individual costs and effects data from patients in each arm. Results Lifetime costs and QALYs after stroke depend on age-of-onset of first-ever stroke. Lifetime QALYs after stroke are 2.42 (90% CI - 0.49 - 2.75 for male patients in usual care and 2.75 (-0.61; 6.26 for females. Lifetime costs for men in the usual care setting are €39,335 (15,951; 79,837 and €42,944 (14,081; 95,944 for women. A comparison with the stroke service results in an ICER of €11,685 saved per QALY gained (€14,211 and €7,745 for men and women respectively. This stroke service is with 90% certainty cost-effective. Conclusions Our analysis shows the potential of large health benefits and cost savings of stroke services, taking a lifetime perspective, also in other European settings.

Quality of Life: Domains for Understanding Maths Anxiety in First Year Pre-Service Teachers through Identity Work

Science.gov (United States)

Wilson, Sue

2016-01-01

Mathematics anxiety in primary pre-service teachers' affects their future teaching of mathematics and achievement of students. Data collected via Critical Incident Technique were used to investigate this anxiety as perceived and identified by first year pre-service teachers. This paper proposes the application of the Quality of Life conceptual…

Development of a clinical prediction model to calculate patient life expectancy: the measure of actuarial life expectancy (MALE).

Science.gov (United States)

Clarke, M G; Kennedy, K P; MacDonagh, R P

2009-01-01

To develop a clinical prediction model enabling the calculation of an individual patient's life expectancy (LE) and survival probability based on age, sex, and comorbidity for use in the joint decision-making process regarding medical treatment. A computer software program was developed with a team of 3 clinicians, 2 professional actuaries, and 2 professional computer programmers. This incorporated statistical spreadsheet and database access design methods. Data sources included life insurance industry actuarial rating factor tables (public and private domain), Government Actuary Department UK life tables, professional actuarial sources, and evidence-based medical literature. The main outcome measures were numerical and graphical display of comorbidity-adjusted LE; 5-, 10-, and 15-year survival probability; in addition to generic UK population LE. Nineteen medical conditions, which impacted significantly on LE in actuarial terms and were commonly encountered in clinical practice, were incorporated in the final model. Numerical and graphical representations of statistical predictions of LE and survival probability were successfully generated for patients with either no comorbidity or a combination of the 19 medical conditions included. Validation and testing, including actuarial peer review, confirmed consistency with the data sources utilized. The evidence-based actuarial data utilized in this computer program design represent a valuable resource for use in the clinical decision-making process, where an accurate objective assessment of patient LE can so often make the difference between patients being offered or denied medical and surgical treatment. Ongoing development to incorporate additional comorbidities and enable Web-based access will enhance its use further.

Effect of corrosion on the fatigue service-life on steel and reinforced concrete beams

NARCIS (Netherlands)

Veerman, R.P.; van Breugel, K.; Koenders, E.A.B.

2015-01-01

Chloride-induced corrosion is a point of big concern in reinforced concrete (RC) structures. To monitor the actual health and to predict the remaining service-life of structures, it is important to understand the structural behaviour and the failure mechanism of structures exposed to chlorides under

The sustainability effects of Product/Service-System design validated through Life Cycle Assessment

DEFF Research Database (Denmark)

Smidt Dreijer, Leise; Birkved, Morten; Howard, Thomas J.

2013-01-01

and lifts. The major research question for the case is how the supplier’s continued ownership of the building materials influences the sustainability of such buildings. By using a PSS design approach in the early design stages, the architects involved in the case project were able to make design decisions......Temporary buildings are generally considered to be unsustainable due to a short life span of the materials applied in the building. The construction materials typically have a longer use life than the required use life of the building, thus functioning building materials are often discarded after...... the demolition. In an attempt to improve the sustainability of temporary buildings, a Product/Service-System (PSS) strategy is here applied to a case project. The case project concerns a temporary building made of leased materials and building components such as shipping containers, scaffolding materials...

Compilation of the calculation elements of the electronic equipments reliability

International Nuclear Information System (INIS)

Lefevre, R.; D'Harcourt, A.; Dupuy, G.

1968-01-01

The aim of this work is to allow the practical execution of the estimated calculation of the electronic devices reliability and to standardize the source and the approach of the calculations while giving a systematic character to their execution mode. The systematic character of the calculations allows a comparison of the reliability of different materials and a rapid control of the calculations validity; at last, it brings out the use conditions of all the components of a set. A reliability calculation made according to the method described here reveals: -components badly used -the relative influence on the reliability of the set, of a component or a components group taking into account of the number, of the characteristics and of the use of these ones. At last, the results of the calculation allows to organize the exploitation (availability) and the maintenance (staff, stock of components) of the materials. The failure rates given in this book are only relating to the components service-life and do not correspond to precocious failures. (authors) [fr

Comparing the Life Cycle Energy Consumption, Global Warming and Eutrophication Potentials of Several Water and Waste Service Options

Directory of Open Access Journals (Sweden)

Xiaobo Xue

2016-04-01

Full Text Available Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energy- and carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability and sensitivity were evaluated, the carbon intensity of the local electricity grid and the efficiency of electricity production by the co-digestion with the energy recovery process were the most important for determining the relative global warming potential results.

A Comparison of Quality of Life Outcomes for People with Intellectual Disabilities in Supported Employment, Day Services and Employment Enterprises

Science.gov (United States)

Beyer, Stephen; Brown, Tony; Akandi, Rachel; Rapley, Mark

2010-01-01

Background: Policy objectives for people with intellectual disabilities include day service modernization and the promotion of paid employment and quality of life. Quality of life is under represented as an outcome measure in vocational research. This research compares subjective and objective quality of life, and quality of work environment for…

Results of strategic calculations for optimizing the first wall life in a tokamak fusion reactor

International Nuclear Information System (INIS)

Daenner, W.

1981-01-01

The development of the FWLTB computer program has reached a stage where prediction of the first wall lifetime is possible. Because of the large number of free parameters strategic calculations were found to be the most appropriate way to arrive at load design conditions which allow optimum life expectancy. In this paper a revised set of life criteria is presented this being followed by the results of parameter studies in which single parameters were varied while the remaining ones were kept fixed at a reference value. These results are used as a guide during the subsequent strategic calculations. In a first strategy we aimed at finding the maximum lifetime for the case that the reactor is operated at a neutron wall loading of 10 MW/m 2 . We found that operation over a period of more than one year is possible if the first wall is designed in a very tiny geometry and cooled by a low-pressure coolant. In a second strategy the aim was to find the design conditions for the case that the first wall is cooled by a high-pressure coolant. It is shown that liquid-lithium cooling is manageable up to high wall loadings, but the lifetime is restricted to about 6 MWa/m 2 . Helium cooling allows a higher lifetime, but the design conditions are such that only modest wall loadings can be permitted. (orig.)

Service life monitoring of the main components at the Temelin nuclear power plant

International Nuclear Information System (INIS)

Hahn, J.; Vincour, D.

2007-01-01

Knowledge and experience gained from the introduction and periodical implementation of life assessment of the major components of the Temelin nuclear power plant is summarized. The initial Soviet technical design of the plant did not incorporate lifetime monitoring and evaluation, therefore it was completed with demonstrative strength and lifetime calculations from Czech companies. Moreover, a Westinghouse primary circuit diagnosis and monitoring system, including the monitoring of temperature and pressure cycles for low-cycle fatigue evaluation, was installed at the plant. The DIALIFE code for the calculation of mainly the low-cycle fatigue of the key pressure components, was developed and installed subsequently as a superstructure to the monitoring system. (author)

A Comparative Assessment of Life-Cycle Greenhouse Gas Emissions from Hypothetical Electric Airport Transportation Services in Thailand

Science.gov (United States)

Koiwanit, J.

2018-05-01

Global warming is an increase of average temperature in the atmosphere, which causes adverse effects on the environment. Carbon dioxide (CO2) from transportation sector is one of the main contributors of the overall greenhouse gases (GHG). To cope with this issue, electric car services are increasingly seen as popular alternative modes of green transportation especially for urban cities as it is more flexible, more environmentally-friendly, and less expensive than the use of conventional vehicles. The study analyses and compare the hypothetical electric car systems from airport transportation services. Center of Environmental Science of Leiden University (CML) 2001, the Life Cycle Impact Assessment (LCIA) method, is applied to convert life cycle inventory data into environmental impacts. The observed results showed that the electric shuttle bus had the highest impact in global warming potential (GWP) compared to other transportation types. Alternatively, this Life Cycle Assessment (LCA) study that evaluated different transportations provided important information for decision makers on quantifying the differences between each scenario.

The Effects of Different Aspects of Tourism Services on Travelers' Quality of Life: Model Validation, Refinement, and Extension

OpenAIRE

Neal, Janet Davis

2000-01-01

The Effects of Different Aspects of Tourism Services on Travelers' Quality of Life: Model Validation, Refinement, and Extension by Janet Davis Neal ABSTRACT Numerous satisfaction studies have been conducted in both tourism and marketing which have examined various aspects of travelers and/or consumers. Quality of life satisfaction studies look beyond the types of satisfaction experiences that endure for only a short time to those that "spill over" into individuals' life domains ...

The Chinese community patient’s life satisfaction, assessment of community medical service, and trust in community health delivery system

Science.gov (United States)

2013-01-01

Background Although the Chinese government put a lot of effort into promoting the community patient’s life satisfaction, there still lacked the holistic and systematic approaches to promote the community patient’s life satisfaction in various regions of China. On the basis of the literature, it was found that both the community patient’s assessment of community medical service and trust in community health delivery system were important considerations when the community patient comprehensively evaluated community medical service to generate life satisfaction. So this study was set up to test whether and to what extent the community patient’s assessments of various major aspects of community medical service/various major aspects of the community patient’s trust in community health delivery system influenced life satisfaction in whole China/in various regions of China. Methods In order to explore the situation of China’s community health delivery system before 2009 and provide a reference for China’s community health delivery system reform, the data that could comprehensively and accurately reflect the community patient’s life satisfaction, assessment of community medical service, and trust in community health delivery system in various regions of China was needed, so this study collaborated with the National Bureau of Statistics of China to carry out a large-scale 2008 national community resident household survey (N = 3,306) for the first time in China. And the specified ordered probit models were established to analyze the dataset from this household survey. Results Among major aspects of community medical service, the medical cost (particularly in developed regions), the doctor-patient communication (particularly in developed regions), the medical facility and hospital environment (particularly in developed regions), and the medical treatment process (particularly in underdeveloped regions) were all key considerations (ppatient’s life

A simple method to prolong the service life of radioactive sources for external radiotherapy.

Science.gov (United States)

Xu, Yingjie; Tian, Yuan; Dai, Jianrong

2014-07-08

A radioactive source is usually replaced and disposed after being used for a certain amount of time (usually a half-life). In this study, a simple method is proposed to prolong its service life. Instead of replacing the used source with a new source of full activity, a new source of less activity is added in the source holder in front of the used one, so that the total activity of two sources is equal to the initial activity of the used source or even higher. Similarly, more sources can be added to the previous ones. Attenuation of front source(s) to the back source(s) was evaluated with exponential attenuation equation, and variation of source-focus distance (SFD) with inverse square law for Leksell 4C Gamma Knife, which served as an example of external radiotherapy units. When the number of front sources increased from 1 to 3, the relative air kerma decreased from 36.5% to 5.0%. Both the attenuation effect and SFD variation contributed to the decrease in air kerma, with the former being the major factor. If the height of the source can be decreased in some way, such as increasing the specific activity of sources, the sources can be used more efficiently. The method prolongs the service life of sources by several factors, and reduces the expense of source exchange and reclamation.

Epidemiology of the Mortality, Calculation of Life Expectancy and Years of Lost Life: The Case of Bane, North West of Iran

Directory of Open Access Journals (Sweden)

Jamshid Yazdani

2014-03-01

Full Text Available Background and purpose: Mortality Statistics and rates show the development of a country in the world. These statistics are very important for determining the distribution of risk factors of mortality (in age and gender groups, ethnicity and so on and they are useful for improving health and preventing from important diseases in future planning of countries in societies. Materials and Methods: This article is a longitudinal descriptive study. All registered deaths in Bane which occurred during 2006-2010, regardless of the cause, were collected from the department of health in Kurdistan University of Medical Sciences, and they were assigned into 21 categories based on Disease Category (ICD10 of WHO. Then the life table for every year was prepared and Life expectancy was computed for each age and sex and total lost years of life for all chapters of ICD10 were calculated. Results: Based on the ICD10, four chapters with the highest frequencies include circulatory diseases by 1008 cases (32.5%, external causes of death by 522 cases (16.7%, cancers by 480 cases (15.3%, and prenatal death by 382 cases (12.2%. Overall, these chapters include 76.4% of total death. The most years of lost life were reported for prenatal period, external causes, diseases of the circulatory system and cancers. Conclusion: Cardiovascular diseases, incidents and accidents, and cancers are the most important causes of death. Among the main reasons of death in the first group are high blood pressures, lack of movement, smoking, not consuming enough fruits, vegetables. In the second group the reasons include not obeying the traffic rules, high speed and so on. Since the sum years of lost life were the highest in the prenatal period, it is necessary to improve pregnancy care and teach mothers prior to pregnancy.

The Interrelation of Prayer and Worship Service Attendance in Moderating the Negative Impact of Life Event Stressors on Mental Well-Being.

Science.gov (United States)

Rainville, G

2017-09-13

The interrelation of worship service attendance and private prayer in moderating the negative impact of life event stressors on mental well-being is examined using hierarchical multiple regressions on a national sample of 2601 Americans. A theoretical model is proposed in which stressful life events are made less distressing under conditions in which exposure to pro-social content at worship services is internalized through frequent private prayer. Interactive models controlling for a block of potential confounds are run to confirm that the stress-moderating effects of worship service attendance are noted only when attendance is complemented by relatively frequent engagement in private prayer.

Replacement of major nuclear power plant components for service life extension

International Nuclear Information System (INIS)

Novak, S.

1987-01-01

Problems are discussed associated with replacement of nuclear power plant components with the aim to extend their original scheduled life. The existing foreign experience shows that it is technically feasible to replace practically all basic components for which the necessity of replacement is established. Data is summed up on the replacement of steam generators in US and West German nuclear power plants showing the duration of the job, the total consumption of manhours, the collective dose equivalent and the cost. Attention is also focused on implemented and projected replacements of circulation pipes in nuclear power plants abroad. Based on these figures, the cost is estimated of the replacement of the reactor vessel and the steam generators for WWER-440 nuclear power plants. The conclusion is arrived at that even based on a conservative estimate, the extension by 20 years of the service life of a nuclear power plant is economically more effective than the construction of a new plant. (Z.M.) 2 tabs., 15 refs., 3 figs

Expected returns from a tax on nuclear fuel elements in the context of longer service lives of German nuclear power plants

International Nuclear Information System (INIS)

Kondziella, Hendrik; Bruckner, Thomas

2010-01-01

To what extent will the fuel element tax introduced by the German government in combination with the longer service life of nuclear power stations reduce the profits of public utilities? A qualitative assessment suggests that the tax will not equal the full profits. Using an electricity market model, various scenarios can be calculated for an eight-year prolongation of the residual service life of existing nuclear power plants. (orig.)

The relationship between childhood poverty, military service, and later life depression among men: Evidence from the Health and Retirement Study.

Science.gov (United States)

Bareis, Natalie; Mezuk, Briana

2016-12-01

Childhood poverty has been associated with depression in adulthood, but whether this relationship extends to later life major depression (MD) or is modified by military service is unclear. Data come from the Health and Retirement Study (HRS) 2010 wave, a longitudinal, nationally representative study of older adults. Men with data on military service and childhood poverty were included (N=6330). Childhood poverty was assessed by four indicators (i.e., parental unemployment, residential instability) experienced before age 16. Military service was categorized as veteran versus civilian, and during draft versus all-volunteer (after 1973) eras. Past year MD was defined by the Composite International Diagnostic Inventory. Four in ten men ever served, with 13.7% in the all-volunteer military. Approximately 12% of civilians, 8% draft era and 24% all-volunteer era veterans had MD. Childhood poverty was associated with higher odds of MD (Odds Ratio (OR): 2.38, 95% Confidence Interval (CI): 1.32-4.32) and higher odds of military service (OR: 2.58, 95% CI: 1.58-4.21). Military service was marginally associated with MD (OR: 1.28, 95% CI: 0.98-1.68) and did not moderate the association between childhood poverty and MD. Self-report data is subject to recall bias. The HRS did not assess childhood physical and emotional abuse, or military combat exposure. Men raised in poverty had greater odds of draft and all-volunteer military service. Early-life experiences, independent of military service, appear associated with greater odds of MD. Assessing childhood poverty in service members may identify risk for depression in later life. Copyright © 2016 Elsevier B.V. All rights reserved.

Life Cycle Cost Calculation at the Transport Company in the Supply of Production of Wooden Houses – Case Study

Directory of Open Access Journals (Sweden)

Potkány Marek

2017-01-01

Full Text Available A correct information manager's decision-maker database is a very important element that substantially affects its success. This article presents the potential of using the methodology of life cycle cost calculation in the conditions of a transport company that focuses on the logistic supply of wood-housing producers. The problem is presented through a case study and addresses the decision-making aspect of the decision about acquisition of the transport vehicle. This decision uses time value indicators, inflation rates, average rate of profitability of industry and life cycle costs. Due to the short life cycle of the analyzed period, it was not necessary to consider the ergonomic requirements resulting from the trend of anthropometric dimensions growth.

Estimation of the temporary service life of DC arc plasmatron cathode

Science.gov (United States)

Kulygin, V. M.; Pereslavtsev, A. V.; Tresvyatskii, S. S.

2017-09-01

The service life of the cathode of a DC arc plasmatron continuously working with tubular electrodes that operate in the air has been considered using the semi-phenomenological approach. The thermal emission, that ensures the necessary flow of electrons, and the evaporation of the cathode material, which determines its erosion, have been taken as the basic physical phenomena that constitute the workflow. The relationships that enable the estimation of the cathode's operating time have been obtained using the known regularities of these phenomena and experimental data available in the literature. The resulting evaluations coincide satisfactorily with the endurance test results.

Harm reduction services as a point-of-entry to and source of end-of-life care and support for homeless and marginally housed persons who use alcohol and/or illicit drugs: a qualitative analysis.

Science.gov (United States)

McNeil, Ryan; Guirguis-Younger, Manal; Dilley, Laura B; Aubry, Tim D; Turnbull, Jeffrey; Hwang, Stephen W

2012-05-17

Homeless and marginally housed persons who use alcohol and/or illicit drugs often have end-of-life care needs that go unmet due to barriers that they face to accessing end-of-life care services. Many homeless and marginally housed persons who use these substances must therefore rely upon alternate sources of end-of-life care and support. This article explores the role of harm reduction services in end-of-life care services delivery to homeless and marginally housed persons who use alcohol and/or illicit drugs. A qualitative case study design was used to explore end-of-life care services delivery to homeless and marginally housed persons in six Canadian cities. A key objective was to explore the role of harm reduction services. 54 health and social services professionals participated in semi-structured qualitative interviews. All participants reported that they provided care and support to this population at end-of-life. Harm reduction services (e.g., syringe exchange programs, managed alcohol programs, etc.) were identified as a critical point-of-entry to and source of end-of-life care and support for homeless and marginally housed persons who use alcohol and/or illicit drugs. Where possible, harm reduction services facilitated referrals to end-of-life care services for this population. Harm reduction services also provided end-of-life care and support when members of this population were unable or unwilling to access end-of-life care services, thereby improving quality-of-life and increasing self-determination regarding place-of-death. While partnerships between harm reduction programs and end-of-life care services are identified as one way to improve access, it is noted that more comprehensive harm reduction services might be needed in end-of-life care settings if they are to engage this underserved population.

Validation in life for dosimetric calculations in PET; Validacion de vida para calculos dosimetricos en PET

Energy Technology Data Exchange (ETDEWEB)

Ocampo ramos, J. C.; Petoussi-Henss, N.; Zankl, M.

2015-07-01

The LIFE program (VOXEL-PHANTOM-BASED SOFTWARE FOR INTERNAL DOSE ASSESSMENT) is developing new software for dose assessment in patients undergoing nuclear medicine examinations. This paper shows some of the validation and comparison tests that have been carried out for the case of the F-18 FDG. Unlike current programs (eg. OLINDA) using phantoms stylized size reference, the new developed software uses the pre calculated library Specific Absorption Fractions (SAF) of photons and electrons based on different anthropomorphic phantoms voxelized and the SAF new computational phantoms of the ICRP for photons, electrons, neutrons and alphas. In addition, the software uses the latest information from nuclear decay of the ICRP 107 (2008). The software is being widely put on trial and comparison with other methods of calculation available. (Author)

On the need for data for the verification of service life models for frost damage

DEFF Research Database (Denmark)

Geiker, Mette Rica; Engelund, Sven

1999-01-01

The purpose of this paper is to draw the attention to the need for the verification of service life models for frost attack on concrete and the collection of relevant data. To illustrate the type of data needed the paper presents models for internal freeze/thaw damage (internal cracking including...

Visual impairment, coping strategies and impact on daily life: a qualitative study among working-age UK ex-service personnel.

Science.gov (United States)

Stevelink, Sharon A M; Malcolm, Estelle M; Fear, Nicola T

2015-11-12

Sustaining a visual impairment may have a substantial impact on various life domains such as work, interpersonal relations, mobility and social and mental well-being. How to adjust to the loss of vision and its consequences might be a challenge for the visually impaired person. The purpose of the current study was to explore how younger male ex-Service personnel cope with becoming visually impaired and how this affects their daily life. Semi-structured interviews with 30 visually impaired male ex-Service personnel, all under the age of 55, were conducted. All participants are members of the charity organisation Blind Veterans UK. Interviews were analysed thematically. Younger ex-Service personnel applied a number of different strategies to overcome their loss of vision and its associated consequences. Coping strategies varied from learning new skills, goal setting, integrating the use of low vision aids in their daily routine, to social withdrawal and substance misuse. Vision loss affected on all aspects of daily life and ex-Service personnel experienced an on-going struggle to accept and adjust to becoming visually impaired. Health care professionals, family and friends of the person with the visual impairment need to be aware that coping with a visual impairment is a continuous struggle; even after a considerable amount of time has passed, needs for emotional, social, practical and physical support may still be present.

Perceived stress and life satisfaction: social network service use as a moderator.

Science.gov (United States)

Niu, Qikun; Liu, Yihao; Sheng, Zitong; He, Yue; Shao, Xiaolin

2011-01-01

Social Network Service (SNS) has become a buzzword in recent media coverage with the development of the second generation of Web-based communities. In China, SNS has played an increasingly important role in its users' daily lives, especially among students. With a sample of 471 college students, we tested the direct relationship between perceived stress and life satisfaction using a regression analysis. Moreover, we found SNS use could buffer the negative effect of perceived stress. This study has practical implications on Internet users' SNS use.

The calculation of costs of postal network and universal postal service based on standard and average cost principles

Directory of Open Access Journals (Sweden)

Blagojević Mladenka Z.

2017-01-01

Full Text Available The provision of universal postal service involves high costs for operator, especially in rural areas. The aim of this paper is to propose and test tool for managing the cost of providing universal postal service and maintaining the postal network in order to facilitate understanding of the problem in the sector. The proposed approach use standard prices and standard quantities (the redefined number of postal units, the number of employees, etc. as well as average costs for calculation of the costs of the universal postal service and postal network. The methodology provides the efficiency analysis, benchmarking and identification of causes of poor performance of management and resource allocation. It can be used for postal operators that do not have modern accounting systems.

End of Life: An Overview

Science.gov (United States)

Toner, Mary Ann; Shadden, Barbara B.

2012-01-01

Speech-language pathologists (SLPs) provide services to patients confronting the end of life (EOL) in a variety of settings. Instead of targeting improvement of health or sustaining life, EOL services focus primarily on quality of life. Although SLPs may not consider themselves core members of the health care team providing EOL services, the…

Calculating life? Duelling discourses in interdisciplinary systems biology.

Science.gov (United States)

Calvert, Jane; Fujimura, Joan H

2011-06-01

A high profile context in which physics and biology meet today is in the new field of systems biology. Systems biology is a fascinating subject for sociological investigation because the demands of interdisciplinary collaboration have brought epistemological issues and debates front and centre in discussions amongst systems biologists in conference settings, in publications, and in laboratory coffee rooms. One could argue that systems biologists are conducting their own philosophy of science. This paper explores the epistemic aspirations of the field by drawing on interviews with scientists working in systems biology, attendance at systems biology conferences and workshops, and visits to systems biology laboratories. It examines the discourses of systems biologists, looking at how they position their work in relation to previous types of biological inquiry, particularly molecular biology. For example, they raise the issue of reductionism to distinguish systems biology from molecular biology. This comparison with molecular biology leads to discussions about the goals and aspirations of systems biology, including epistemic commitments to quantification, rigor and predictability. Some systems biologists aspire to make biology more similar to physics and engineering by making living systems calculable, modelable and ultimately predictable-a research programme that is perhaps taken to its most extreme form in systems biology's sister discipline: synthetic biology. Other systems biologists, however, do not think that the standards of the physical sciences are the standards by which we should measure the achievements of systems biology, and doubt whether such standards will ever be applicable to 'dirty, unruly living systems'. This paper explores these epistemic tensions and reflects on their sociological dimensions and their consequences for future work in the life sciences. Copyright © 2010 Elsevier Ltd. All rights reserved.

Colil: a database and search service for citation contexts in the life sciences domain.

Science.gov (United States)

Fujiwara, Toyofumi; Yamamoto, Yasunori

2015-01-01

To promote research activities in a particular research area, it is important to efficiently identify current research trends, advances, and issues in that area. Although review papers in the research area can suffice for this purpose in general, researchers are not necessarily able to obtain these papers from research aspects of their interests at the time they are required. Therefore, the utilization of the citation contexts of papers in a research area has been considered as another approach. However, there are few search services to retrieve citation contexts in the life sciences domain; furthermore, efficiently obtaining citation contexts is becoming difficult due to the large volume and rapid growth of life sciences papers. Here, we introduce the Colil (Comments on Literature in Literature) database to store citation contexts in the life sciences domain. By using the Resource Description Framework (RDF) and a newly compiled vocabulary, we built the Colil database and made it available through the SPARQL endpoint. In addition, we developed a web-based search service called Colil that searches for a cited paper in the Colil database and then returns a list of citation contexts for it along with papers relevant to it based on co-citations. The citation contexts in the Colil database were extracted from full-text papers of the PubMed Central Open Access Subset (PMC-OAS), which includes 545,147 papers indexed in PubMed. These papers are distributed across 3,171 journals and cite 5,136,741 unique papers that correspond to approximately 25 % of total PubMed entries. By utilizing Colil, researchers can easily refer to a set of citation contexts and relevant papers based on co-citations for a target paper. Colil helps researchers to comprehend life sciences papers in a research area more efficiently and makes their biological research more efficient.

Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service

Directory of Open Access Journals (Sweden)

Scheffer Gert J

2010-03-01

Full Text Available Abstract Background To determine the advanced life support procedures provided by an Emergency Medical Service (EMS and a Helicopter Emergency Medical Service (HEMS for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures restricted to the HEMS-physician and procedures for which the HEMS is more experienced than the EMS. Methods Prospective study of a consecutive group of children examined and treated by the HEMS of the eastern region of the Netherlands. Data regarding type of emergency, physiological parameters, NACA scores, treatment, and 24-hour survival were collected and subsequently analysed. Results Of the 558 children examined and treated by the HEMS on scene, 79% had a NACA score of IV-VII. 65% of the children had one or more advanced life support procedures restricted to the HEMS and 78% of the children had one or more procedures for which the HEMS is more experienced than the EMS. The HEMS intubated 38% of all children, and 23% of the children intubated and ventilated by the EMS needed emergency correction because of potentially lethal complications. The HEMS provided the greater part of intraosseous access, as the EMS paramedics almost exclusively reserved this procedure for children in cardiopulmonary resuscitation. The EMS provided pain management only to children older than four years of age, but a larger group was in need of analgesia upon arrival of the HEMS, and was subsequently treated by the HEMS. Conclusions The Helicopter Emergency Medical Service of the eastern region of the Netherlands brings essential medical expertise in the field not provided by the emergency medical service. The Emergency Medical Service does not provide a significant quantity of procedures obviously needed by the paediatric patient.

Nuclear power plant life management

International Nuclear Information System (INIS)

Rorive, P.; Berthe, J.; Lafaille, J.P.; Eussen, G.

1998-01-01

Several definitions can be given to the design life of a nuclear power plant just as they can be attributed to the design life of an industrial installation: the book-keeping life which is the duration of the provision for depreciation of the plant, the licensed life which corresponds to the duration for which the plant license has been granted and beyond which a new license should be granted by the safety authorities, the design life which corresponds to the duration specified for ageing and fatigue calculations in the design of some selected components during the plant design phase, the technical life which is the duration of effective technical operation and finally the economic life corresponding to the duration of profitable operation of the plant compared with other means of electricity production. Plant life management refers to the measures taken to cope with the combination of licensed, design, technical and economical life. They can include repairs and replacements of components which have arrived to the end of their life due to known degradation processes such as fatigue, embrittlement, corrosion, wear, erosion, thermal ageing. In all cases however, it is of great importance to plan the intervention so as to minimise the economic impact. Predictive maintenance is used together with in-service inspection programs to fulfil this goal. The paper will go over the methodologies adopted in Belgium in all aspects of electrical, mechanical and civil equipment for managing plant life. (author)

The eSourcing Capability Model for Service Providers: Knowledge Manage-ment across the Sourcing Life-cycle

OpenAIRE

Laaksonen, Pekka

2011-01-01

Laaksonen, Pekka The eSourcing Capability Model for Service Providers: Knowledge Manage-ment across the Sourcing Life-cycle Jyväskylä: Jyväskylän yliopisto, 2011, 42 s. Tietojärjestelmätiede, kandidaatintutkielma Ohjaaja(t): Käkölä, Timo Tässä kandidaatintutkielmassa selvitettiin sitä, miten the eSourcing Capability Model for Service Providers-mallin käytännöt (practices) ovat liittyneet tietä-myksenhallinnan neljään prosessiin: tiedon luominen, varastointi/noutaminen, jakamine...

Adverse psychosocial working conditions and poor quality of life among financial service employees in Brazil.

Science.gov (United States)

Silva, Luiz Sergio; Barreto, Sandhi Maria

2012-01-01

Workers in the financial services sector are exposed to great stress at work. This study investigates whether exposure to adverse psychosocial work conditions is independently associated with poor health-related physical and mental quality of life among financial services workers. We studied a nationwide representative sample of 2,054 workers of a large Brazilian state bank in 2008. Adverse psychosocial work conditions were investigated by the Effort-reward imbalance (ERI) scale and the Job content questionnaire (JCQ). Health-related quality of life (HRQL) was assessed using the Medical Outcomes Study Short-Form General Health Survey (SF-12). Poor mental and physical HRQL was defined by the lowest quartiles of the SF-12 final score distributions. Associations were investigated using multiple logistic regression analysis. In the multivariate analysis, exposures to low control and lack of social support at work (JCQ) were associated with poor HRQL in the physical domain. Increasing effort-reward imbalance and overcommitment (ERI), on the other hand, were associated with poor HRQL in the mental domain, with a significant statistical trend. Overcommitment was also associated with poor physical HRQL. The results suggest that exposure to adverse psychosocial work conditions has a negative impact on both domains of HRQL among financial service workers. They also indicate that ERI and DC models capture different aspects of job strain.

Should the service life of nuclear power plants be limited for technical reasons?

International Nuclear Information System (INIS)

Schomer, E.

1995-01-01

German nuclear power plant operating licenses take into account the fact that the design lifetime of the facilities is 40 years. The technological lifetime, however, is governed by actual ageing processes and operational burden. The service life of nuclear power plants can be extended by replacement of the steam generator and by repair or replacement of the reactor pressure vessel or parts thereof. Attention is also paid to the reactor protection systems. (J.B.). 8 figs

The use of fractal dimension calculation algorithm to determine the nature of autobiographical memories distribution across the life span

Science.gov (United States)

Mitina, Olga V.; Nourkova, Veronica V.

In the given research we offer the technique for the calculation of the density of events which people retrieve from autobiographical memory. We wanted to prove a non-uniformity nature of memories distribution in the course of time and were interested with the law of distribution of these events during life course.

Cost accounting for end-of-life care: recommendations to the field by the Cost Accounting Workgroup.

Science.gov (United States)

Seninger, Stephen; Smith, Dean G

2004-01-01

Accurate measurement of economic costs is prerequisite to progress in improving the care delivered to Americans during the last stage of life. The Robert Wood Johnson Excellence in End-of-Life Care national program assembled a Cost Accounting Workgroup to identify accurate and meaningful methods to measure palliative and end-of-life health care use and costs. Eight key issues were identified: (1) planning the cost analysis; (2) identifying the perspective for cost analysis; (3) describing the end-of-life care program; (4) identifying the appropriate comparison group; (5) defining the period of care to be studied; (6) identifying the units of health care services; (7) assigning monetary values to health care service units; and (8) calculating costs. Economic principles of cost measurement and cost measurement issues encountered by practitioners were reviewed and incorporated into a set of recommendations.

Viscoelastic response of HTPB based solid fuel to horizontal and vertical storage slumping conditions and it's affect on service life

International Nuclear Information System (INIS)

Nawaz, Q.; Nizam, F.

2011-01-01

Frequent use of solid fuels as thrust generating energy source in modern day space vehicle systems has created a need to assess their serviceability for long term storage under various conditions. Solid fuel grain, the most important part of any solid fuel system, responds visco elastically to any loading condition. For the assessment of the service life of any solid fuel system, the solid fuel grain has to be structurally evaluated in applied storage conditions. Structural integrity of the grain is exceptionally significant to guarantee the successful operation of the solid fuel system. In this work, numerical simulations have been performed to assess the mechanical stresses and strains induced in an HTPB based solid fuel grain during service life employing ABAQUS standard FEA software using 4-node bilinear quadrilateral elements. For finite element analysis (FEA), typical 2-D and p/nth axisymmetric section of 5-point (n) star grain geometry is considered. Mechanical loads include the horizontal or vertical 1-g (solid fuel weight) storage condition. The simulation results are compared with the analytical results for the same grain geometry. Analytically measured slump deflections in grain segment at various storage times have been found in good relation with the FEA based simulation results. This proves the validity of the procedure adopted and is helpful in assessment of the service life of solid fuel systems. (author)

Internal curing as a new tool for infrastructural renewal : reducing repair congestion, increasing service life, and improving sustainability.

Science.gov (United States)

2014-04-01

Internal curing has recently been developed as a new concrete technology that has the potential to : dramatically extend the service life of concrete infrastructure elements like bridge decks. Internal curing : uses prewetted lightweight aggregate in...

Wear calculation possibility of slide-friction pair "shaft-plain bearing" for four-stroke engines

Science.gov (United States)

Springis, Guntis; Rudzitis, Janis; Avisane, Anita; Kumermanis, Maris

2013-12-01

The issues of the service life and its prediction for main four stroke engine parts such as shaft-plain bearing have always been of particular importance. The article determines the most suitable mathematical calculation model allowing considering the set of parameters needed for the slide-friction pair's calculation, thus achieving a result as precise as possible. Since the wear process is variable and many-sided it is influenced by very many different parameters, for example, the surface geometry (roughness, waviness, form deviation, etc.), the physical and mechanical conditions of the upper layer, component material, wear regime, wear temperature, etc. The offered wear calculation model taking into consideration as much as possible wear affecting parameters is based on the fatigue theory regularities of the friction surface's destroying, using the approach of probability theory.

Design and analysis of seals for extended service life

Science.gov (United States)

Bower, Mark V.

1992-01-01

Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

Acceptance towards Goods and Services Tax (GST and Quality of Life: Antecedent and outcome using partial least square method

Directory of Open Access Journals (Sweden)

Arlinah Abd Rashid

2016-06-01

Full Text Available The good and service tax (GST in Malaysia was implemented in 2015 as a tax reform program to generate a stable source of revenue. This study explores the respondents’ behaviour towards GST, a week post-implementation. The partial least square (PLS modelling was used to establish the relationship between acceptance, knowledge and feelings towards GST as well as the household quality of life. There is a positive relationship between the antecedents and the quality of life. Acceptance of GST exerts a significant relationship towards feelings and quality of life. The study concludes that Malaysians, in general, accept GST that ensures a better quality of life in the future.

Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

DEFF Research Database (Denmark)

Schipull Kauschen, Jan

2012-01-01

on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...... IPDs with regard to longevity and adaptability. CONCLUSION The new type of service-focused IPD and the related life-cycle responsibility (development, building phase, maintenance and dismantling/adaption/recycling) creates incentive to integrate life cycle thinking into the development process of IPDs......, resulting in more sustainable building solutions with a greater extend of positive environmental, economical and social impacts. The research presented will also show the importance of adaption and configuration of these complex building components by architects and planners, as they will have a great...

Health-Related Quality of Life: Expanding a Conceptual Framework to Include Older Adults Who Receive Long-Term Services and Supports

Science.gov (United States)

Zubritsky, Cynthia; Abbott, Katherine M.; Hirschman, Karen B.; Bowles, Kathryn H.; Foust, Janice B.; Naylor, Mary D.

2013-01-01

For older adults receiving long-term services and supports (LTSS), health-related quality of life (HRQoL) has emerged as a critical construct to examine because of its focus on components of well-being, which are affected by progressive changes in health status, health care, and social support. HRQoL is a health-focused quality of life (QOL)…

Recruitment, soldiers and the experience of army life: compulsory military service in Peru and Colombia (1919-1933

Directory of Open Access Journals (Sweden)

Carlos Camacho Arango

2018-05-01

Full Text Available The article studies different aspects of mandatory military service in Peru and Colombia from 1919 to 1933 including recruitment; the social, “racial”, and geographical origins of soldiers; and army life in both countries. Documents from military archives in the U.S. and France, as well as writings from Peruvian and Colombian commissioned and non-commissioned officers were the main sources used. The method is comparative and it shows clear features in common, including the scarcity of resources that affected all aspects of service.

Accounting for ecosystem services in Life Cycle Assessment, Part II: toward an ecologically based LCA.

Science.gov (United States)

Zhang, Yi; Baral, Anil; Bakshi, Bhavik R

2010-04-01

Despite the essential role of ecosystem goods and services in sustaining all human activities, they are often ignored in engineering decision making, even in methods that are meant to encourage sustainability. For example, conventional Life Cycle Assessment focuses on the impact of emissions and consumption of some resources. While aggregation and interpretation methods are quite advanced for emissions, similar methods for resources have been lagging, and most ignore the role of nature. Such oversight may even result in perverse decisions that encourage reliance on deteriorating ecosystem services. This article presents a step toward including the direct and indirect role of ecosystems in LCA, and a hierarchical scheme to interpret their contribution. The resulting Ecologically Based LCA (Eco-LCA) includes a large number of provisioning, regulating, and supporting ecosystem services as inputs to a life cycle model at the process or economy scale. These resources are represented in diverse physical units and may be compared via their mass, fuel value, industrial cumulative exergy consumption, or ecological cumulative exergy consumption or by normalization with total consumption of each resource or their availability. Such results at a fine scale provide insight about relative resource use and the risk and vulnerability to the loss of specific resources. Aggregate indicators are also defined to obtain indices such as renewability, efficiency, and return on investment. An Eco-LCA model of the 1997 economy is developed and made available via the web (www.resilience.osu.edu/ecolca). An illustrative example comparing paper and plastic cups provides insight into the features of the proposed approach. The need for further work in bridging the gap between knowledge about ecosystem services and their direct and indirect role in supporting human activities is discussed as an important area for future work.

Fatigue life assessment under multiaxial variable amplitude loading

International Nuclear Information System (INIS)

Morilhat, P.; Kenmeugne, B.; Vidal-Salle, E.; Robert, J.L.

1996-06-01

A variable amplitude multiaxial fatigue life prediction method is presented in this paper. It is based on a stress as input data are the stress tensor histories which may be calculated by FEM analysis or measured directly on the structure during the service loading. The different steps of he method are first presented then its experimental validation is realized for log and finite fatigue lives through biaxial variable amplitude loading tests using cruciform steel samples. (authors). 9 refs., 7 figs

PhybalSIT — Fatigue Assessment and Life Time Calculation of the Ductile Cast Iron EN-GJS-600 at Ambient and Elevated Temperatures

Science.gov (United States)

Jost, Benjamin; Klein, Marcus; Eifler, Dietmar

This paper focuses on the ductile cast iron EN-GJS-600 which is often used for components of combustion engines. Under service conditions, those components are mechanically loaded at different temperatures. Therefore, this investigation targets at the fatigue behavior of EN-GJS-600 at ambient and elevated temperatures. Light and scanning electron microscopic investigations were done to characterize the sphericity of the graphite as well as the ferrite, pearlite and graphite fraction. At elevated temperatures, the consideration of dynamic strain ageing effects is of major importance. In total strain increase, temperature increase and constant total strain amplitude tests, the plastic strain amplitude, the stress amplitude, the change in temperature and the change in electrical resistance were measured. The measured values depend on plastic deformation processes in the bulk of the specimens and at the interfaces between matrix and graphite. The fatigue behavior of EN-GJS-600 is dominated by cyclic hardening processes. The physically based fatigue life calculation "PHYBALSIT" (SIT = strain increase test) was developed for total strain controlled fatigue tests. Only one temperature increase test is necessary to determine the temperature interval of pronounced dynamic strain ageing effects.

Fee-for-service cancer rehabilitation programs improve health-related quality of life.

Science.gov (United States)

Kirkham, A A; Neil-Sztramko, S E; Morgan, J; Hodson, S; Weller, S; McRae, T; Campbell, K L

2016-08-01

Rigorously applied exercise interventions undertaken in a research setting result in improved health-related quality of life (hrqol) in cancer survivors, but research to demonstrate effective translation of that research to practice is needed. The objective of the present study was to determine the effect of fee-for-service cancer rehabilitation programs in the community on hrqol and on self-reported physical activity and its correlates. After enrolment and 17 ± 4 weeks later, new clients (n = 48) to two fee-for-service cancer rehabilitation programs completed the 36-Item Short Form Health Survey (rand-36: rand Corporation, Santa Monica, CA, U.S.A.), the Godin Leisure-Time Exercise Questionnaire, and questions about physical activity correlates. Normal fee-for-service operations were maintained, including a fitness assessment and individualized exercise programs supervised in a group or one-on-one setting, with no minimum attendance required. Fees were associated with the assessment and with each exercise session. Of the 48 participants, 36 (75%) completed both questionnaires. Improvements in the physical functioning, role physical, pain, and energy/fatigue scales on the rand-36 exceeded minimally important differences and were of a magnitude similar to improvements reported in structured, rigorously applied, and free research interventions. Self-reported levels of vigorous-intensity (p = 0.021), but not moderate-intensity (p = 0.831) physical activity increased. The number of perceived barriers to exercise (p = 0.035) and the prevalence of fatigue as a barrier (p = 0.003) decreased. Exercise self-efficacy improved only in participants who attended 11 or more sessions (p = 0.002). Exercise enjoyment did not change (p = 0.629). Enrolment in fee-for-service cancer rehabilitation programs results in meaningful improvements in hrqol comparable to those reported by research interventions, among other benefits. The fee-for-service model could be an effective model for

Durapgulf, a local service life model for the durability of concrete structures in the South of Iran

International Nuclear Information System (INIS)

Shekarchi, M.; Ghods, P.; Alizadeh, R.; Chini, M.; Hoseini, M.

2008-01-01

Reinforced concrete structures were widely constructed in the south of Iran for the infrastructures of ports and oil exploration. Unfortunately, the deterioration of concrete structures in this marine area, which is mainly due to the chloride-induced corrosion of rebars in concrete, imposes hundreds of millions dollars of repair cost every year. During the last decades, extensive studies have been conducted to evaluate the effect of different parameters on chloride diffusion into concrete, corrosion initiation, and its propagation. In order to predict the time required for various steps of the corrosion phenomena, many numerical models have been developed. In this paper, development of Durapgulf (a service of life design model), which can predict the corrosion initiation of reinforced concrete (RC) structures in the south of Iran, is described and also the application of this model for service life design of RC structures is demonstrated in a hypothetical example and verified with other experimental results in this region. (author)

Applying WHO's 'workforce indicators of staffing need' (WISN) method to calculate the health worker requirements for India's maternal and child health service guarantees in Orissa State.

Science.gov (United States)

Hagopian, Amy; Mohanty, Manmath K; Das, Abhijit; House, Peter J

2012-01-01

In one district of Orissa state, we used the World Health Organization's Workforce Indicators of Staffing Need (WISN) method to calculate the number of health workers required to achieve the maternal and child health 'service guarantees' of India's National Rural Health Mission (NRHM). We measured the difference between this ideal number and current staffing levels. We collected census data, routine health information data and government reports to calculate demand for maternal and child health services. By conducting 54 interviews with physicians and midwives, and six focus groups, we were able to calculate the time required to perform necessary health care tasks. We also interviewed 10 new mothers to cross-check these estimates at a global level and get assessments of quality of care. For 18 service centres of Ganjam District, we found 357 health workers in our six cadre categories, to serve a population of 1.02 million. Total demand for the MCH services guaranteed under India's NRHM outpaced supply for every category of health worker but one. To properly serve the study population, the health workforce supply should be enhanced by 43 additional physicians, 15 nurses and 80 nurse midwives. Those numbers probably under-estimate the need, as they assume away geographic barriers. Our study established time standards in minutes for each MCH activity promised by the NRHM, which could be applied elsewhere in India by government planners and civil society advocates. Our calculations indicate significant numbers of new health workers are required to deliver the services promised by the NRHM.

Systematic, efficient and consistent LCA calculations for chemical and biochemical processes

DEFF Research Database (Denmark)

Petchkaewkul, Kaesinee; Malakul, Pomthong; Gani, Rafiqul

2016-01-01

that allow a wider coverage of chemical and biochemical processes. Improvements of LCIA calculations and eco-efficiency evaluation are introduced. Also, a new model for photochemical ozone formation has been developed and implemented. Performance of LCSoft in terms of accuracy and reliability is compared......Life Cycle Assessment or LCA is a technique, which is applied for the study and evaluation of quantitative environmental impacts through the entire life cycle of products, processes or services in order to improve and/or evaluate the design of existing as well as new processes. The LCA factors can...... with another well-known LCA-software, SimaPro for a biochemical process – the production of bioethanol from cassava rhizome. The results show a very good match of new added impact categories. Also, the results from a new feature in LCSoft, which is eco-efficiency evaluation, are presented....

Life cycle assessment of renewables: present issues, future outlook and implications for the calculation of external costs

International Nuclear Information System (INIS)

Frankl, P.

2002-01-01

In principle, Life Cycle Assessment (LCA) is certainly appropriate for estimating external costs of renewables, since major environmental impacts of the latter are generated in phases of the life cycle other than use. In practice however, several issues still remain. They are related to the availability and quality of Life Cycle Inventory (LCI) data, to the frit technological development of renewable energy technologies (RET), to the existence of many different applications of the latter and to a strong dependency on local conditions. Moreover, a 'static' picture of present technologies is not enough for policy indications. Therefore some kind of dynamic LCA is needed. These LCA issues are reflected in the calculation of external costs. First, the paper discusses these issues on the examples of two main technologies, namely photovoltaic (PV) and wind. Second, it discusses the results of ExternE for these two specific technologies and gives an outlook for the future. Future needs for a better use of LCA as a support tool for the calcination of external costs are identified. Finally, a new research project funded by the European Commission focused on LCI of renewables is briefly introduced and presented. (author)

Effect of Climate Change on Service Life of High Volume Fly Ash Concrete Subjected to Carbonation—A Korean Case Study

Directory of Open Access Journals (Sweden)

Ki-Bong Park

2017-01-01

Full Text Available The increase in CO2 concentrations and global warming will increase the carbonation depth of concrete. Furthermore, temperature rise will increase the rate of corrosion of steel rebar after carbonation. On the other hand, compared with normal concrete, high volume fly ash (HVFA concrete is more vulnerable to carbonation-induced corrosion. Carbonation durability design with climate change is crucial to the rational use of HVFA concrete. This study presents a probabilistic approach that predicts the service life of HVFA concrete structures subjected to carbonation-induced corrosion resulting from increasing CO2 concentrations and temperatures. First, in the corrosion initiation stage, a hydration-carbonation integration model is used to evaluate the contents of the carbonatable material, porosity, and carbonation depth of HVFA concrete. The Monte Carlo method is adopted to determine the probability of corrosion initiation. Second, in the corrosion propagation stage, an updated model is proposed to evaluate the rate of corrosion, degree of corrosion for cover cracking of concrete, and probability of corrosion cracking. Third, the whole service life is determined considering both corrosion initiation stage and corrosion propagation stage. The analysis results show that climate change creates a significant impact on the service life of durable concrete.

Transition from children's to adult services for young adults with life-limiting conditions: A realist review of the literature.

Science.gov (United States)

Kerr, Helen; Price, Jayne; Nicholl, Honor; O'Halloran, Peter

2017-11-01

Improvements in care and treatment have led to more young adults with life-limiting conditions living beyond childhood, which means they must make the transition from children's to adult services. This has proved a challenging process for both young adults and service providers, with complex transition interventions interacting in unpredictable ways with local contexts. To explain how intervention processes interact with contextual factors to help transition from children's to adult services for young adults with life-limiting conditions. Systematic realist review of the literature. Literature was sourced from four electronic databases: Embase, MEDLINE, Science Direct and Cochrane Library from January 1995 to April 2016. This was supplemented with a search in Google Scholar and articles sourced from reference lists of included papers. Data were extracted using an adapted standardised data extraction tool which included identifying information related to interventions, mechanisms, contextual influences and outcomes. Two reviewers assessed the relevance of papers based on the inclusion criteria. Methodological rigor was assessed using the relevant Critical Appraisal Skills Programme tools. 78 articles were included in the review. Six interventions were identified related to an effective transition to adult services. Contextual factors include the need for children's service providers to collaborate with adult service providers to prepare an environment with knowledgeable staff and adequate resources. Mechanisms triggered by the interventions include a sense of empowerment and agency amongst all stakeholders. Early planning, collaboration between children's and adult service providers, and a focus on increasing the young adults' confidence in decision-making and engaging with adult services, are vital to a successful transition. Interventions should be tailored to their context and focused not only on organisational procedures but on equipping young adults, parents

Supporting family carers providing end-of-life home care: a qualitative study on the impact of a hospice at home service.

Science.gov (United States)

Jack, Barbara A; O'Brien, Mary R; Scrutton, Joyce; Baldry, Catherine R; Groves, Karen E

2015-01-01

To explore bereaved family carers' perceptions and experiences of a hospice at home service. The increasing demand for the development of home-based end-of-life services is not confined to the western world; such services are also emerging in resource-poor countries where palliative care services are developing with limited inpatient facilities. Despite this growing trend, studies show a variety of interrelated factors, with an emphasis on the availability of informal carers and their ability to cope, which can influence whether terminally ill patients actually remain at home. A hospice at home service was developed to meet patients' and families' needs by providing individually tailored resources. A qualitative study. Data were collected by semi-structured, digitally recorded interviews from 20 family carers who had experienced the service. Interviews were transcribed verbatim and a thematic approach adopted for analysis. All participants reported a personal positive impact of the service. Family carers commented the service provided a valued presence, they felt in good hands and importantly it helped in supporting normal life. The impact of an individualised, targeted, hospice at home service using dedicated, palliative care trained, staff, is perceived positively by family carers and importantly, supportive of those with additional caring or employment commitments. The emergence of hospice at home services has resulted in more options for patients and their families, when the increased amount of care a family member has to provide in these circumstances needs to be adequately supported, with the provision of a flexible service tailored to individual needs and delivered by appropriately trained staff. © 2014 The Authors. Journal of Clinical Nursing Published by John Wiley & Sons Ltd.

NASA's Evolutionary Xenon Thruster (NEXT) Project Qualification Propellant Throughput Milestone: Performance, Erosion, and Thruster Service Life Prediction After 450 kg

Science.gov (United States)

Herman, Daniel A.

2010-01-01

The NASA s Evolutionary Xenon Thruster (NEXT) program is tasked with significantly improving and extending the capabilities of current state-of-the-art NSTAR thruster. The service life capability of the NEXT ion thruster is being assessed by thruster wear test and life-modeling of critical thruster components, such as the ion optics and cathodes. The NEXT Long-Duration Test (LDT) was initiated to validate and qualify the NEXT thruster propellant throughput capability. The NEXT thruster completed the primary goal of the LDT; namely to demonstrate the project qualification throughput of 450 kg by the end of calendar year 2009. The NEXT LDT has demonstrated 28,500 hr of operation and processed 466 kg of xenon throughput--more than double the throughput demonstrated by the NSTAR flight-spare. Thruster performance changes have been consistent with a priori predictions. Thruster erosion has been minimal and consistent with the thruster service life assessment, which predicts the first failure mode at greater than 750 kg throughput. The life-limiting failure mode for NEXT is predicted to be loss of structural integrity of the accelerator grid due to erosion by charge-exchange ions.

Comparing the Life Cycle Energy Consumption, Global Warming and Eutrophication Potentials of Several Water and Waste Service Options

Science.gov (United States)

Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG...

Quality of working life and workload in home help services: a review of the literature and a proposal for a research model.

NARCIS (Netherlands)

Arts, S.E.J.; Kerkstra, A.; Zee, J. van der; Huyer Abu-Saad, H.

2001-01-01

In this literature review, several models for quality of working life and workload appropriate for home help services are presented. The aim was to develop a model for assessing the psychological and physical outcomes of working in home help services. Although the models described in this review

47 CFR 1.1623 - Probability calculation.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Probability calculation. 1.1623 Section 1.1623 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1623 Probability calculation. (a) All calculations shall be...

NPP component maintenance and life management in Russia

International Nuclear Information System (INIS)

Tutnov, I.; Lyssakov, V.

2002-01-01

This report represents the conceptual strategies (ideas) on life management programs for nuclear power plants. Use of the optimum programs for NPP's NDE, maintenance service, operation and service life can provide the best economic benefit for the utilities. The paper presents general approaches to life management, maintenance service, and risks of operating and service life of NPPs in Russia. The report offers some optimized ways for the solution of these important tasks

Steam generator life management

International Nuclear Information System (INIS)

King, P.; McGillivray, R.; Reinhardt, W.; Millman, J.; King, B.; Schneider, W.

2003-01-01

'Full-Text:' Steam Generator Life Management responsibility embodies doing whatever is necessary to maintain the steam generation equipment of a nuclear plant in effective, reliable service. All comes together in that most critical deliverable, namely the submission of the documentation which wins approval for return to service after an outage program. Life management must address all aspects of SG reliability over the life of the plant. Nevertheless, the life management activities leading up to return to service approval is where all of it converges. Steam Generator Life Management activities entail four types of work, all equally important in supporting the objective of successful operation. These activities are i) engineering functions; including identification of inspection and maintenance requirements, outage planning and scope definition plus engineering assessment, design and analysis as necessary to support equipment operation, ii) fitness of service work; including the expert evaluation of degradation mechanisms, disposition of defects for return to service or not, and the fitness for service analysis as required to justify ongoing operation with acceptable defects, iii) inspection work; including large scale eddy current inspection of tubing, the definition of defect size and character, code inspections of pressure vessel integrity and visual inspections for integrity and iv) maintenance work; including repairs, retrofits, cleaning and modifications, all as necessary to implement the measures defined during activities i) through iii). The paper discusses the approach and execution of the program for the achievement of the above objectives and particularly of items i) and ii). (author)

Calculation of life distributions, in particular Weibull distributions, from operational observations

International Nuclear Information System (INIS)

Rauhut, J.

1982-01-01

Established methods are presented by which life distributions of machine elements can be determined on the basis of laboratory experiments and operational observations. Practical observations are given special attention as the results estimated on the basis of conventional have not been accurate enough. As an introduction, the stochastic life concept, the general method of determining life distributions, various sampling methods, and the Weibull distribution are explained. Further, possible life testing schedules and maximum-likelihood estimates are discussed for the complete sample case and for censered sampling without replacement in laboratory experiments. Finally, censered sampling with replacement in laboratory experiments is discussed; it is shown how suitable parameter estimates can be obtained for given life distributions by means of the maximum-likelihood method. (orig./RW) [de

Association between obesity, quality of life, physical activity and health service utilization in primary care patients with osteoarthritis.

NARCIS (Netherlands)

Rosemann, T.J.; Grol, R.P.T.M.; Herman, K.; Wensing, M.J.P.; Szecsenyi, J.

2008-01-01

ABSTRACT: OBJECTIVE: To assess the association of obesity with quality of life, health service utilization and physical activity in a large sample of primary care patients with osteoarthritis (OA). METHODS: Data were retrieved from the PraxArt project, representing a cohort of 1021 primary care

Description and application of the EAP computer program for calculating life-cycle energy use and greenhouse gas emissions of household consumption items

NARCIS (Netherlands)

Benders, R.M.J.; Wilting, H.C.; Kramer, K.J.; Moll, H.C.

2001-01-01

Focusing on reduction in energy use and greenhouse gas emissions, a life-cycle-based analysis tool has been developed. The energy analysis program (EAP) is a computer program for determining energy use and greenhouse gas emissions related to household consumption items, using a hybrid calculation

Mechanical property tests in hot gas environment for evaluation of life expectancy of aero-engine turbine blades and for assessment of procedures for prolonging service life. Mechanische Pruefung unter Heissgasatmosphaere zur Ermittlung der Lebenserwartung von Fluggasturbinenschaufeln und zur Bewertung von Verfahren zur Lebensdauerverlaengerung

Energy Technology Data Exchange (ETDEWEB)

Peichl, L

1984-01-01

The aim of this programme was the determination and optimization of mechanical testing procedures in order to enable a service life prediction for turbine blades as well as to measure the life consumption of blades which have already been in service. Under these testing conditions procedures were to be investigated which lead to a prolongation of the service life of the blades. The results have shown that the rig test at constant values of load and temperature, which are typical for service conditions, is sufficient for the laboratory simulation. The life consumption of blades run in the engine can be determined by measuring the residual creep life in the rig test. Using the resulting data the life consumption of a particular blade run in the engine can be estimated by the non-destructive measurement of its elongation. The precision of residual life prediction is raised by respecting the master heat and porosity of the blades. From the investigation of high-temperature corrosion resistant coatings it follows that IN 100 can be protected against the attack of sea salt over its whole creep life by coating with a precious metal modified aluminide or by LPPS- or EB-PVD-MCrAlY-coatings. By aluminising, the cooling channels of turbine blades can be protected against oxidation over more than 700 h in the temperature/load cycling test. However, the coating technique used is only applicable under laboratory conditions. In contrary, internal coating by pulse aluminising, which is compatible to production conditions, showed less oxidation resistance.

Services on Application Level in Grid for Scientific Calculations

OpenAIRE

Goranova, Radoslava

2010-01-01

AMS Subj. Classification: 00-02, (General) The Grid is a hardware and software infrastructure that coordinates access to distribute computational and data resources, shared by different institutes, computational centres and organizations. The Open Grid Services Architecture (OGSA) describes an architecture for a service-oriented grid computing environment, based on Web service technologies, WSDL and SOAP. In this article we investigate possibilities for realization of business process com...

The Collective Practice of Calculation

DEFF Research Database (Denmark)

Schrøder, Ida

The calculation of costs plays an increasingly large role in the decision-making processes of public sector human service organizations. This has brought scholars of management accounting to investigate the relationship between caring professions and demands to make economic entities of the service...... productions as either a process of hybridization or conflict. With these approaches, though, they fail to interrogate the possibility that professional action might not be either the one or the other, but entail a broad variety of relationships between calculations and judgements. This paper elaborates...... and judgement to reach decisions to invest in social services. The line is not drawn between the two, but between the material arrangements that make decisions possible. This implies that the insisting on qualitatively based decisions gives the professionals agency to collectively engage in practical...

Factors influencing the end of the service life of protective gloves used in car repair shops: a preliminary report.

Science.gov (United States)

Emilia, Irzmańska; Agnieszka, Stefko; Katarzyna, Dyńska-Kukulska

2015-01-01

The paper presents the results of an end-of-service-life study on 2 kinds of protective gloves designed for workplaces in which workers are exposed to mineral oils and mechanical factors. The authors developed their own end-of-service-life study method that takes into account factors occurring during real-life use of protective gloves. The examined gloves were subjected to mechanical, chemical, and physical factors. The objective of the study was to compare the protective in new gloves subjected to a laboratory simulation test and in gloves used at workplaces in car repair shops. A further goal was to design a glove assessment procedure that would ensure comprehensive analysis of the actual level of performance provided by gloves exposed to selected chemical and mechanical factors as well as subjected to the influence of temperature and humidity, mechanical damage, and chemical degradation of material. The results lead to the conclusion that simultaneous exposure of protective gloves to mechanical, chemical, and physical factors significantly decreases their performance levels. Furthermore, similar performance levels were obtained for gloves subjected to laboratory simulation tests and for those used in the workplace.

A case of industrial safety appraisal for extension of service life of GTK-10-4 gas turbines used at gas transmission stations

Science.gov (United States)

Rybnikov, A. I.; Kovalev, A. G.; Kryukov, I. I.; Leont'ev, S. A.; Moshnikov, A. V.

2017-04-01

It is shown that the extended life and enhanced operational reliability of parts and subassemblies of the most popular GTK-10-4 gas transmission plants are determined by the enhanced efficiency of the control over technical condition and operational safety of turbine plants in conformity with industrial safety requirements imposed on gas pipeline compressor stations. It has been established that the materials of parts and subassemblies of gas turbine plants with different, especially with maximal operating time, shall be exposed to NDT for the purpose of determining the actual mechanical characteristics of these materials with different operating time and calculating residual life. The analysis of damageability and operating conditions has helped to identify parts and subassemblies for repair or replacement with the highest frequency of unacceptable defects. These parts and subassemblies have been shown to include base members of the axial compressor (AC), a turbine housing, an axial compressor rotor, high- and low-pressure turbine (HPT and LPT) discs, a 12-part holder, the housing of the holder of HPT and LPT guiding blades, a sealed baffler, and working and guiding AC, LPT and HPT blades. The most typical operational defects have been enumerated and analyzed. It has been determined that the primary task of the industrial safety appraisal for extending the life of GTK-10-4 with limit-exceeding operating time is to thoroughly examine HPT and LPT discs with more than 130,000 hours of operating time and establish by DT methods characteristics of materials for evaluation, taking account of their degradation, and residual life of critical turbine elements. In addition, it has been shown that the service life of HP turbine discs can be extended by replacing the disc material (EP-428 12% chromium steel) with a material with a higher linear expansion factor that somewhat exceeds the expansion factor of EI-893 nickel alloy used to melt out working blades.

A Conceptual Model for Calculating the Return of Costs Invested in the Creation of an Economic Security Service, During a Short-Term Period

Directory of Open Access Journals (Sweden)

Melikhova Tetiana O.

2018-02-01

Full Text Available The article is aimed at suggesting methods for calculating the short-term period of return of costs invested in creation of an economic security service. The article considers approaches to calculation of the period of return of costs, advanced at the level of enterprise, which build the methodical basis for definition of such period. At the level of structural subdivisions of enterprise, which do not produce products, it is suggested to use conditional money flow as a source of financing advanced costs. The calculation of the short-term return on investment at the enterprise level provides for: allocation of expenses for the permanent and the replacement parts during the year; determination of the production of money flow and the money flow accumulated during the year. Annual depreciation payments are the basis of fixed costs. Methods of determination of the gross, net, valid, and specified periods of return of costs, advanced during the year for introduction of an economic security service at enterprise, have been suggested.

The most important parameters of life quality of the Great Patriotic War veterans

Directory of Open Access Journals (Sweden)

Yuanov A.A.

2015-03-01

Full Text Available Purpose of the study was to estimate current state of quality of life of Great Patriotic War veterans. Materials and methods. The study included 368 veterans of the Great Patriotic War according to Federal State "Concerning veterans" #5, 1995. Protocol of the study included adapted fragments of WHOQOL, WHOQOL-Old, SF-36, SIP questioners as well as visually-analog scale of self-assessment of quality of life with further going quality of life index calculations. Re-sults. In the studied sample of the Great Patriotic War (GPW veterans including long-livers comparably was detected high level of quality of life (QOL by physical criteria and independence level. It was revealed that QOL by self-service criteria in the GPW veterans was low and extremely variable by other criteria groups. Both ageing and gender influenced upon physical activity, self-service and QOL self-assessment. Women were outstanding by psychological criteria and independence with no association with age group. Conclusion. QOL indication in the GPW veterans of studied sample elucidated a satisfactory level of healthcare in the region, which allows veterans in certain way preserve both physical and psychological health, as well as grounds positive self-assessment of personal position in society and values system according to their life-goals and expectations.

Ecosystem Services

Science.gov (United States)

Ecosystem goods and services are the many life-sustaining benefits we receive from nature and contribute to environmental and human health and well-being. Ecosystem-focused research will develop methods to measure ecosystem goods and services.

Mathematical modeling of the heat transfer for determining the depth of thawing basin buildings with long service life

Science.gov (United States)

Sirditov, Ivan; Stepanov, Sergei

2017-11-01

In this paper, a numerical study of the problem of determining a thawing basin in the permafrost soil for buildings with a long service life is carried out using two methods, with the formulas of set of rules 25.13330.2012 "Soil bases and foundations on permafrost soils" and using a mathematical model.

Advances in Modeling Concrete Service Life : Proceedings of 4th International RILEM PhD Workshop

CERN Document Server

Gulikers, Joost

2012-01-01

In this book, a critical analysis is made on service life models related to reinforcement corrosion. The contributors are on the frontier of knowledge in the field of durability of reinforced concrete. Topics covered in the book include: causes and mechanisms of deterioration, transport mechanisms in concrete, numerical modeling of concrete behavior, durability modeling and prediction, reliability approach to structural design for durability, structural behavior following degradation of concrete structures, deterioration and repair of concrete structures, and corrosion measurement techniques.

Reading and Calculating Billing Through Mobile Devices

Directory of Open Access Journals (Sweden)

Pilar Alexandra Moreno

2013-06-01

Full Text Available This article broadly describes the analysis, design and development of the system utilitarian, called “Reading and billing calculation site through mobile devices.” The application is oriented Public Services Companies, first water services, to perform part of the billing process “in place” through phones or any mobile devices compatible with Android. Will enable you to take readings of service consumption, recording new gauging, online update and control the information for users and turnover. This technology is considered as such one site billing method as through Internet is connected with the database of the company, sending and receiving date information, which makes the calculation of the billing for the reading period, bringing benefits to the client and the service generating company.

Feasibility of a UK community-based, eTherapy mental health service in Greater Manchester: repeated-measures and between-groups study of 'Living Life to the Full Interactive', 'Sleepio' and 'Breaking Free Online' at 'Self Help Services'.

Science.gov (United States)

Elison, Sarah; Ward, Jonathan; Williams, Chris; Espie, Colin; Davies, Glyn; Dugdale, Stephanie; Ragan, Kathryn; Chisnall, Leanne; Lidbetter, Nicky; Smith, Keith

2017-07-20

There is increasing evidence to support the effectiveness of eTherapies for mental health, although limited data have been reported from community-based services. Therefore, this service evaluation reports on feasibility and outcomes from an eTherapy mental health service. 'Self Help Services', an Increasing Access to Psychological Therapies (IAPT) eTherapy service in Greater Manchester. 1068 service users referred to the service for secondary care for their mental health difficulties. Participants were triaged into one of three eTherapy programmes: 'Living Life to the Full Interactive' for low mood, stress and anxiety; 'Sleepio' for insomnia; and 'Breaking Free Online' for substance misuse, depending on clinical need. Standardised psychometric assessments of depression, anxiety and social functioning, collected as part of the IAPT Minimum Data Set, were conducted at baseline and post-treatment. Data indicated baseline differences, with the Breaking Free Online group having higher scores for depression and anxiety than the Living Life to the Full Interactive (depression CI 1.27 to 3.21, pmental health scores were found within all three groups (all pmental health difficulties (pmental health difficulties and suggest that eTherapies may be a useful addition to treatment offering in community-based services. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Service Modeling for Service Engineering

Science.gov (United States)

Shimomura, Yoshiki; Tomiyama, Tetsuo

Intensification of service and knowledge contents within product life cycles is considered crucial for dematerialization, in particular, to design optimal product-service systems from the viewpoint of environmentally conscious design and manufacturing in advanced post industrial societies. In addition to the environmental limitations, we are facing social limitations which include limitations of markets to accept increasing numbers of mass-produced artifacts and such environmental and social limitations are restraining economic growth. To attack and remove these problems, we need to reconsider the current mass production paradigm and to make products have more added values largely from knowledge and service contents to compensate volume reduction under the concept of dematerialization. Namely, dematerialization of products needs to enrich service contents. However, service was mainly discussed within marketing and has been mostly neglected within traditional engineering. Therefore, we need new engineering methods to look at services, rather than just functions, called "Service Engineering." To establish service engineering, this paper proposes a modeling technique of service.

Energy- and carbondioxide intensities for 319 products and services - examples of analyses using a tool for analysis of environmental impacts of consumption; Energi- och koldioxidintensiteter foer 319 varor och tjaenster - exempel paa analyser med ett verktyg foer analys av miljoepaaverkan av konsumtion

Energy Technology Data Exchange (ETDEWEB)

Raety, Riitta; Carlsson-Kanyama, Annika

2007-03-15

This report presents calculations of energy use and carbondioxide emissions for different products and services. The calculations have been done with a computer program called EAP, that calculates the so called energy and carbon dioxide intensity for products and services. The calculations take into account the whole life cycle of the product including raw materials, production, transportation, sales, and recycling. These data can then be combined with expenditure surveys to investigate some of the environmental impacts of household consumption patterns.

Usage of Geoprocessing Services in Precision Forestry for Wood Volume Calculation and Wind Risk Assessment

Directory of Open Access Journals (Sweden)

Tomáš Mikita

2015-01-01

Full Text Available This paper outlines the idea of a precision forestry tool for optimizing clearcut size and shape within the process of forest recovery and its publishing in the form of a web processing service for forest owners on the Internet. The designed tool titled COWRAS (Clearcut Optimization and Wind Risk Assessment is developed for optimization of clearcuts (their location, shape, size, and orientation with subsequent wind risk assessment. The tool primarily works with airborne LiDAR data previously processed to the form of a digital surface model (DSM and a digital elevation model (DEM. In the first step, the growing stock on the planned clearcut determined by its location and area in feature class is calculated (by the method of individual tree detection. Subsequently tree heights from canopy height model (CHM are extracted and then diameters at breast height (DBH and wood volume using the regressions are calculated. Information about wood volume of each tree in the clearcut is exported and summarized in a table. In the next step, all trees in the clearcut are removed and a new DSM without trees in the clearcut is generated. This canopy model subsequently serves as an input for evaluation of wind risk damage by the MAXTOPEX tool (Mikita et al., 2012. In the final raster, predisposition of uncovered forest stand edges (around the clearcut to wind risk is calculated based on this analysis. The entire tool works in the background of ArcGIS server as a spatial decision support system for foresters.

LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

Energy Technology Data Exchange (ETDEWEB)

Dunn, K. [Savannah River National Laboratory; Bellamy, S. [Savannah River National Laboratory; Daugherty, W. [Savannah River National Laboratory; Sindelar, R. [Savannah River National Laboratory; Skidmore, E. [Savannah River National Laboratory

2013-08-18

Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintain integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.

Evaluating weather factors and material response during outdoor exposure to determine accelerated test protocols for predicting service life

Science.gov (United States)

R. Sam Williams; Steven Lacher; Corey Halpin; Christopher White

2005-01-01

To develop service life prediction methods for the study of sealants, a fully instrumented weather station was installed at an outdoor test site near Madison, WI. Temperature, relative humidiy, rainfall, ultraviolet (UV) radiation at 18 wavelengths, and wind speed and direction are being continuously measured and stored. The weather data can be integrated over time to...

Effectiveness of various public private partnership pavement rehabilitation treatments: A big data informatics survival analysis of pavement service life : final report.

Science.gov (United States)

2017-09-29

Past research efforts have used a wide variety of methodological approaches to analyze pavement performance indicators, pavement rehabilitation treatments, and pavement service life. Using big data informatics methods, the intent of this study is to ...

FAMILY-WORK CONFLICT AND LIFE SATISFACTION AMONG WORKERS OF ANKARA YOUTH SERVICES AND PROVINCIAL DIRECTORATE OF SPORTS ACCORDING TO DIFFERENT VARIABLES

OpenAIRE

Mustafa Önder; Burhan; Emrah

2016-01-01

In this study Work-Family Conflict, Family-Work Conflict and Life Satisfaction were carried out to indicate 329 staff’s relationship between each other, who work in Ankara Youth Services and Sports Province Management, by determining whether work-family conflict, family-work conflict and life satisfaction differientiate or not according to socio-demographic variables. According to obtained results, it was concluded that gender, age, having management position, number of children and duration ...

Statistical distribution of time to crack initiation and initial crack size using service data

Science.gov (United States)

Heller, R. A.; Yang, J. N.

1977-01-01

Crack growth inspection data gathered during the service life of the C-130 Hercules airplane were used in conjunction with a crack propagation rule to estimate the distribution of crack initiation times and of initial crack sizes. A Bayesian statistical approach was used to calculate the fraction of undetected initiation times as a function of the inspection time and the reliability of the inspection procedure used.

The EMBRACE web service collection

DEFF Research Database (Denmark)

Pettifer, S.; Ison, J.; Kalas, M.

2010-01-01

The EMBRACE (European Model for Bioinformatics Research and Community Education) web service collection is the culmination of a 5-year project that set out to investigate issues involved in developing and deploying web services for use in the life sciences. The project concluded that in order...... for web services to achieve widespread adoption, standards must be defined for the choice of web service technology, for semantically annotating both service function and the data exchanged, and a mechanism for discovering services must be provided. Building on this, the project developed: EDAM......, an ontology for describing life science web services; BioXSD, a schema for exchanging data between services; and a centralized registry (http://www.embraceregistry.net) that collects together around 1000 services developed by the consortium partners. This article presents the current status of the collection...

Health Care Service Needs and Correlates of Quality of Life: A Case Study of Elderly Chinese Immigrants in Canada

Science.gov (United States)

Chow, Henry P. H.

2012-01-01

This study explored the health care service needs and the major correlates of quality of life among 127 community-dwelling elderly Chinese immigrants in a western Canadian city. Participants were interviewed in their homes by trained, bilingual interviewers employing a structured questionnaire that covered a wide range of topics including health…

Service quality and clinical outcomes: an example from mental health rehabilitation services in England.

Science.gov (United States)

Killaspy, Helen; Marston, Louise; Omar, Rumana Z; Green, Nicholas; Harrison, Isobel; Lean, Melanie; Holloway, Frank; Craig, Tom; Leavey, Gerard; King, Michael

2013-01-01

Current health policy assumes better quality services lead to better outcomes. To investigate the relationship between quality of mental health rehabilitation services in England, local deprivation, service user characteristics and clinical outcomes. Standardised tools were used to assess the quality of mental health rehabilitation units and service users' autonomy, quality of life, experiences of care and ratings of the therapeutic milieu. Multiple level modelling investigated relationships between service quality, service user characteristics and outcomes. A total of 52/60 (87%) National Health Service trusts participated, comprising 133 units and 739 service users. All aspects of service quality were positively associated with service users' autonomy, experiences of care and therapeutic milieu, but there was no association with quality of life. Quality of care is linked to better clinical outcomes in people with complex and longer-term mental health problems. Thus, investing in quality is likely to show real clinical gains.

What works in 'real life' to facilitate home deaths and fewer hospital admissions for those at end of life?: results from a realist evaluation of new palliative care services in two English counties.

Science.gov (United States)

Wye, Lesley; Lasseter, Gemma; Percival, John; Duncan, Lorna; Simmonds, Bethany; Purdy, Sarah

2014-01-01

WE EVALUATED END OF LIFE CARE SERVICES IN TWO ENGLISH COUNTIES INCLUDING: coordination centres, telephone advice line, 'Discharge in Reach' nurses, a specialist community personal care team and community nurse educators. Elsewhere, we published findings detailing high family carer satisfaction and fewer hospital admissions, Accident and Emergency attendances and hospital deaths for service users compared to controls. The aim of this paper is to discuss what contributed to those outcomes. Using realist evaluation, data collection included documentation (e.g. referral databases), 15 observations of services and interviews with 43 family carers and 105 professionals. Data were analysed using framework analysis, applying realist evaluation concepts. Findings were discussed at successive team meetings and further data was collected until team consensus was reached. Services 'worked' primarily for those with cancer with 'fast track' funding who were close to death. Factors contributing to success included services staffed with experienced palliative care professionals with dedicated (and sufficient) time for difficult conversations with family carers, patients and/or clinical colleagues about death and the practicalities of caring for the dying. Using their formal and informal knowledge of the local healthcare system, they accessed community resources to support homecare and delivered excellent services. This engendered confidence and reassurance for staff, family carers and patients, possibly contributing to less hospital admissions and A&E attendances and more home deaths. With demand for 24-hour end of life care growing and care provision fragmented across health and social care boundaries, services like these that cut across organisational sectors may become more important. They offer an overview to help navigate those desiring a home death through the system.

Recovery-oriented care in a secure mental health setting: "striving for a good life".

Science.gov (United States)

McKenna, Brian; Furness, Trentham; Dhital, Deepa; Park, Malcolm; Connally, Fiona

2014-01-01

Recovery-oriented care acknowledges the unique journey of the consumer to regain control of his or her life in order to live a good life. Recovery has become a dominant policy-directed model of mental health service delivery. Even services that have traditionally been institutional and custodial have been challenged to embrace a recovery-oriented model. The aim of this qualitative study was to provide a description of service delivery in a secure in-patient mental health service, which has developed a self-professed recovery-oriented model of service delivery. An in-depth case study of the secure in-patient service using an exploratory research design was undertaken to meet the aim of this study. Qualitative data was gathered from interviews with consumers and staff (n = 15) and a focus group with carers (n = 5). Data were analyzed using a content analysis approach. Ethical approval for the study was obtained. The stakeholders readily described the secure service within recovery domains. They described a common vision; ways to promote hope and autonomy; examples of collaborative partnership which enhanced the goal of community integration; a focus on strength-based, holistic care; and the management of risk by taking calculated risks. Discrepancies in the perceptions of stakeholders were determined. This case study research provides a demonstrable example of recovery-in-action in one secure mental health service in Australia. It is intended to assist mental health services and clinicians seeking guidance in developing strategies for building and maintaining partnerships with consumers and carers in order for secure services to become truly recovery-oriented.

Life management of SG for WWER plants

International Nuclear Information System (INIS)

Trunov, N. B.; Dragunov, Yu. G.; Banyuk, G. F.

2004-01-01

Nowadays, 252 steam generators (SG) of horizontal type are in operation at WWER plants constructed by the Russian designs. In connection with end of the specified service life of the reactor plant equal to 30 years the activities are performed on service life extension of the main equipment including the SG. At some Units, throughout the design service life of SG there were problems resulting in necessity of SG replacement. At the same time the SGs at some Units are in successful operation above the design service life. This report deals with the peculiarities of operation of the horizontal SGs and the problems to be highlighted as the most important for service life extension. The main component to determine possibility for SG service life extension is the SG tubing. As the operating experience shows it is water chemistry of the secondary circuit that is the main factor influencing operability of the SG tubing. Therefore, differences in water chemistry organization leads to significant differences in operability of the SG tubing at various Units and in some cases within one Unit. Owing to the fact that the cases of water chemistry disturbance and the process of tubes fouling with the corrosion products of the main condensate system are not excluded, the damages continue to occur. Tube integrity shall be inspected by eddy current method using the various instrument complexes. This method has certain disadvantages but allows to estimate the degree and direction of degradation processes. The results of eddy current test (ECT) can be used to determine the plugging criterion for defective tubes. The significant number of defective tubes at some Units makes a choice of the plugging criterion to be an important problem, on which solution the SG safety, reliability and service life depends. The report deals with directions of activities in service life management for the SG at WWER plants. Main activities are improvement of water chemistry and non-destructive tests.(author)

Models for estimation of service life of concrete barriers in low-level radioactive waste disposal

International Nuclear Information System (INIS)

Walton, J.C.; Plansky, L.E.; Smith, R.W.

1990-09-01

Concrete barriers will be used as intimate parts of systems for isolation of low level radioactive wastes subsequent to disposal. This work reviews mathematical models for estimating the degradation rate of concrete in typical service environments. The models considered cover sulfate attack, reinforcement corrosion, calcium hydroxide leaching, carbonation, freeze/thaw, and cracking. Additionally, fluid flow, mass transport, and geochemical properties of concrete are briefly reviewed. Example calculations included illustrate the types of predictions expected of the models. 79 refs., 24 figs., 6 tabs

Models for estimation of service life of concrete barriers in low-level radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Walton, J.C.; Plansky, L.E.; Smith, R.W. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

1990-09-01

Concrete barriers will be used as intimate parts of systems for isolation of low level radioactive wastes subsequent to disposal. This work reviews mathematical models for estimating the degradation rate of concrete in typical service environments. The models considered cover sulfate attack, reinforcement corrosion, calcium hydroxide leaching, carbonation, freeze/thaw, and cracking. Additionally, fluid flow, mass transport, and geochemical properties of concrete are briefly reviewed. Example calculations included illustrate the types of predictions expected of the models. 79 refs., 24 figs., 6 tabs.

Calculation of the quantities of radiation risk in Japanese population

International Nuclear Information System (INIS)

Nakamura, Yuji

1993-01-01

The purpose of this study was to reevaluate various kinds of indicators of radiation risks using additive projection and multiplicative projection models, as proposed by ICRP. Total death probability rate (1985) and probability rate of cancer death (1983 to 1987) were used as data base. The following indicators were calculated: total conditional death probability rate and conditional death probability rate; normalized death age probability density and unconditional death probability rate; attributable life-time probability of cancer death; and other risk indicators, including mean loss of life expectancy, reduction of life expectancy, mean annually committed probability of attributable cancer deaths, annual extra probability of cancer death, probability density of the age of death, maximum relative death probability rate (age at maximum relative rate), and probabilistic aging. In terms of calculations of these risk indicators for the comprehensive cancer death, there was no great difference between the Japanese population and ICRP. When calculating according to sites of cancer, calculations of indicators for cancer mortality (or cancer cure rate) in the Japanese population might bedifferent from ICRP's calculation. (N.K.) different from ICRP's calculations. (N.K.)

Bulk Electric Load Cost Calculation Methods: Iraqi Network Comparative Study

Directory of Open Access Journals (Sweden)

Qais M. Alias

2016-09-01

Full Text Available It is vital in any industry to regain the spent capitals plus running costs and a margin of profits for the industry to flourish. The electricity industry is an everyday life touching industry which follows the same finance-economic strategy. Cost allocation is a major issue in all sectors of the electric industry, viz, generation, transmission and distribution. Generation and distribution service costing’s well documented in the literature, while the transmission share is still of need for research. In this work, the cost of supplying a bulk electric load connected to the EHV system is calculated. A sample basic lump-average method is used to provide a rough costing guide. Also, two transmission pricing methods are employed, namely, the postage-stamp and the load-flow based MW-distance methods to calculate transmission share in the total cost of each individual bulk load. The three costing methods results are then analyzed and compared for the 400kV Iraqi power grid considered for a case study.

Life estimation I and C cable insulation materials based on accelerated life testing accelerated life testing

International Nuclear Information System (INIS)

Santhosh, T.V.; Ramteke, P.K.; Shrestha, N.B.; Ahirwar, A.K.; Gopika, V.

2016-01-01

Accelerated Iife tests are becoming increasingly popular in today's industry due to the need for obtaining life data quickly and reliably. Life testing of products under higher stress levels without introducing additional failure modes can provide significant savings of both time and money. Correct analysis of data gathered via such accelerated life testing will yield parameters and other information for the product's life under use stress conditions. To be of practical use in assessing the operational behaviour of cables in NPPs, laboratory ageing aims to mimic the type of degradation observed under operational conditions. Conditions of testing therefore need to be carefully chosen to ensure that the degradation mechanism occurring in the accelerated tests are similar to those which occur in service. This paper presents the results of an investigation in which the elongation-at-break (EAB) measurements were carried on a typical control cable to predict the mean life at service conditions. A low voltage polyvinyl chloride (PVC) insulated and PVC sheathed control cable, used in NPP instrumentation and control (I and C) applications, was subjected thermal ageing at three elevated temperatures

Biostatistics with emphasis on life table survival rate calculations (including Kaplan Meier) and the logrank test

International Nuclear Information System (INIS)

Mould, Richard F.

1995-01-01

Purpose/Objective: To explain some of the most useful statistical calculation procedures which are relevant to radiation oncologists and to provide insights on what tests and procedures should be used in various situations such as when survival rates and their associated standard errors have to be determined. To describe some of the problems and pitfalls in clinical trial designs which have to be overcome if a trial is to have the possibility of reaching a successful conclusion. To review methods of computing criteria to quantitatively describe criteria of success (eg. quality of life, long-term survival, cure) of radiation oncology and to suggest possible future statistical improvements in this area. Chi-Squared Test: The chi-squared test is probably the most useful of the tests of statistical significance for the radiation oncologist. Applications will be described, including goodness of fit tests and 2x2 contingency tables which are the simplest of the generalized nxm contingency tables. Degrees of Freedom and P<0.05 for Significance Testing: An Introduction will be given to the meaning of P<0.05 in relation to significance testing and the use of tables of critical values of a test statistic (eg. chi-squared) which are given as a function of degrees of freedom and P-values. Survival Rate Calculations for Grouped and Ungrouped Data: The life-table method (sometimes termed the actuarial method) will be explained for both grouped data (eg. survival times grouped in annual intervals for patients who have died and for those who are still alive or lost to follow-up) and for ungrouped data (when individual survival times are used). The method for ungrouped data is variously termed the Kaplan-Meier or Product Limit method. Logrank Test: This is the most useful test for comparison of the survival experience of two groups of patients and its use will be explained. In part the computation is similar to that for the Kaplan-Meier/Product Limit method

Biostatistics with emphasis on life table survival rate calculations (including Kaplan Meier) and the logrank test

Energy Technology Data Exchange (ETDEWEB)

Mould, Richard F

1995-07-01

Purpose/Objective: To explain some of the most useful statistical calculation procedures which are relevant to radiation oncologists and to provide insights on what tests and procedures should be used in various situations such as when survival rates and their associated standard errors have to be determined. To describe some of the problems and pitfalls in clinical trial designs which have to be overcome if a trial is to have the possibility of reaching a successful conclusion. To review methods of computing criteria to quantitatively describe criteria of success (eg. quality of life, long-term survival, cure) of radiation oncology and to suggest possible future statistical improvements in this area. Chi-Squared Test: The chi-squared test is probably the most useful of the tests of statistical significance for the radiation oncologist. Applications will be described, including goodness of fit tests and 2x2 contingency tables which are the simplest of the generalized nxm contingency tables. Degrees of Freedom and P<0.05 for Significance Testing: An Introduction will be given to the meaning of P<0.05 in relation to significance testing and the use of tables of critical values of a test statistic (eg. chi-squared) which are given as a function of degrees of freedom and P-values. Survival Rate Calculations for Grouped and Ungrouped Data: The life-table method (sometimes termed the actuarial method) will be explained for both grouped data (eg. survival times grouped in annual intervals for patients who have died and for those who are still alive or lost to follow-up) and for ungrouped data (when individual survival times are used). The method for ungrouped data is variously termed the Kaplan-Meier or Product Limit method. Logrank Test: This is the most useful test for comparison of the survival experience of two groups of patients and its use will be explained. In part the computation is similar to that for the Kaplan-Meier/Product Limit method.

On the application of thermodynamics of corrosion for service life design of concrete structures

DEFF Research Database (Denmark)

Küter, Andre; Geiker, Mette Rica; Møller, Per

2010-01-01

There are unexploited possibilities in the application of thermodynamics of corrosion for service life design (SLD) of concrete structures. Thermodynamics provides means for insightful descriptions of corrosion mechanisms and of corrosion protection mechanisms. Strategies for corrosion protection...... of the application of thermodynamics for SLD and gives examples of two applications: description of corrosion processes and design of countermeasures. Emphasis is set on chloride induced corrosion....... can be based on thermodynamically consistent corrosion mechanisms and evaluation of existing and design of new countermeasures can be performed using thermodynamics. Similarly, materials concepts for embedded electrodes can be designed using thermodynamics. The present paper provides a brief outline...

Service Life Prediction of Wood Claddings by in-situ Measurement of Wood Moisture Content

DEFF Research Database (Denmark)

Engelund, Emil Tang; Lindegaard, Berit; Morsing, Niels

2009-01-01

of wood moisture are done by in-situ resistance moisture meters (Lindegaard and Morsing 2006). The aim is that the test should form the basis of evaluation of the maintenance requirements and the prediction of service life of the surface treatment and the wood/construction. At the moment 60 test racks...... are exposed. This study examines the data from the first five years of outdoor exposure using data from a test rack with a water-borne acrylic coating and a test rack with ICP coating for case studies. The moisture content data was converted into weekly average and weekly variation values which gave a deeper...

Further development of the spindle seal on reactor valves and development for increasing serviceability

International Nuclear Information System (INIS)

Zilling, H.

1977-01-01

A literature search concerning packing glands for sealing oscillating rods was marginally profitable. In order to design single-wall siphons a programme has been developed, in which by applying boundary conditions such as range, pressure, setting - the distortion tension which occur in each section of the siphon and also its life can be calculated. In the 'serviceability' project records have been kept during the installation of dampers and valves. (orig.) [de

Organizational performance focused on users' quality of life: The role of service climate and "contribution-to-others" wellbeing beliefs.

Science.gov (United States)

Pătraș, Luminița; Martínez-Tur, Vicente; Estreder, Yolanda; Gracia, Esther; Moliner, Carolina; Peiró, José María

2018-06-01

The investigation of organizational factors as precursors of the quality of life (QoL) of service users in organizations for individuals with intellectual disability has been relatively neglected.With this in mind, this study tests the mediation of service climate between employee's "contribution-to-others" wellbeing beliefs (COWBs) and organizational performance focused on the QoL of individuals with intellectual disability. A total of 104 organizations participated in the study. Data were collected from 885 employees and 809 family members of individuals with intellectual disability. The results of the multilevel mediation model supported the hypotheses. When employees believe that their own wellbeing depends on helping others (COWBs) service climate reported by employees is stimulated. Service climate in turn was associated with organizational performance focused on QoL of people with intellectual disability, assessed by family members. The manuscript concludes with theoretical and practical implications of the study. Copyright © 2018 Elsevier Ltd. All rights reserved.

Control of the Onboard Microgravity Environment and Extension of the Service Life of the Long-Term Space Station

Science.gov (United States)

Titov, V. A.

2018-03-01

The problem of control of the on-board microgravity environment in order to extend the service life of the long-term space station has been discussed. Software developed for the ISS and the results of identifying dynamic models and external impacts based on telemetry data have been presented. Proposals for controlling the onboard microgravity environment for future long-term space stations have been formulated.

Athletes Off the Field: A Model for Team Building and Leadership Development through Service Learning. Linking Learning with Life.

Science.gov (United States)

Haughey, Laurie

This booklet provides step-by-step guidelines for developing a leadership-through-service-learning component for a school athletic team. It is based on a program called LIFE LINE (Leaders in Football and Education) founded in 1996 as a peer leadership group that would increase team unity and success both on and off the field. The guide summarizes…

Semiempirical Methodology for Estimating the Service Life of Concrete Deck Panels Strengthened with Fiber-Reinforced Polymer

Directory of Open Access Journals (Sweden)

Eon-Kyoung Kim

2014-01-01

Full Text Available Deterioration of concrete bridge decks affects their durability, safety, and function. It is therefore necessary to conduct structural rehabilitation of damaged concrete decks by strengthening them with fiber-reinforced polymer. Of the recent studies on the strengthened structures, most have focused on static behavior; only a few studies have investigated fatigue behavior. Accurate analysis of fatigue in concrete deck performance requires a more realistic simulated moving load. This study developed a theoretical live-load model to reflect the effect of moving vehicle loads, based on a statistical approach to the measurement of real traffic loads over various time periods in Korea. It assessed the fatigue life and strengthening effect of bridge decks strengthened with either carbon fiber sheets or grid carbon fiber polymer plastic using probabilistic and reliability analyses. It used extrapolations and simulations to derive maximum load effects for time periods ranging from 1 day to 75 years. Limited fatigue tests were conducted and probabilistic and reliability analyses were carried out on the strengthened concrete bridge deck specimens to predict the extended fatigue life. Analysis results indicated that strengthened concrete decks provide sufficient resistance against increasing truck loads during the service life of a bridge.

Collaborative Business Services Provision

NARCIS (Netherlands)

Camarinha-Matos, L.M.; Afsarmanesh, H.; Oliveira, A.I.; Ferrada, F.; Hammoudi, S.; Maciaszek, L.A.; Cordeiro, J.; Dietz, J.L.G.

2013-01-01

The association of services to manufactured products, leading to service-enhanced products, is an important mechanism for value creation and differentiation. This is particularly relevant in the case of complex, highly customized and long-life products. Suitable servicing in this context typically

Service-life prediction of reinforced concrete structures in subsurface environment

Energy Technology Data Exchange (ETDEWEB)

Kwon, Ki Jung; Jung, Hae Ryong; Park, Joo Wan [Korea Radioactive Waste Agency, Daejeon (Korea, Republic of)

2016-03-15

This paper focuses on the estimation of durability and service-life of reinforced concrete structures in Wolsong Low- and intermediate-level wastes Disposal Center (WLDC) in Korea. There are six disposal silos located in the saturated environment. The silo concrete is degraded due to reactions with groundwater and chemical attacks, and finally it will lose its properties as a transport barrier. The infiltration of sulfate and magnesium, leaching of potassium hydroxide, and chlorine induced corrosion are the most significant factors for degradation of reinforced concrete structure in underground environment. From the result of evaluation of the degradation time for each factor, the degradation rate of the reinforced concrete due to sulfate and magnesium is 1.308×10{sup -3} cm/yr, and it is estimated to take 48,000 years for full degradation while potassium hydroxide is leached in depth of less than 1.5 cm at 1,000 years after the initiation of degradation. In case of chlorine induced corrosion, it takes 1,648 years to initiate corrosion in the main reinforced bar and 2,288 years to reach the lifetime limit of the structural integrity, and thus it is evaluated as the most significant factor.

The Relationship of Perceptions of Service and Support Adequacy to Family Quality of Life for Families of Children with Deafblindness

Science.gov (United States)

Kyzar, Kathleen

2010-01-01

This study investigated the relationship between families' perceptions of supports and services and family quality of life (FQOL) for families of children with deafblindness, and the potential of satisfaction with family-professional partnerships and child age as moderators of this relationship. The study was guided by the Unified Theory of Family…

Life cycle management of service water systems

International Nuclear Information System (INIS)

Egan, Geoffrey R.; Besuner, Philip M.; Mahajan, Sat P.

2004-01-01

As nuclear plants age, more attention must focus on age and time dependent degradation mechanisms such as corrosion, erosion, fatigue, etc. These degradation mechanisms can best be managed by developing a life cycle management plan which integrates past historical data, current conditions and future performance needs. In this paper we present two examples of life cycle management. In the first example, the 20-year maintenance history of a sea water cooling system (cement-lined, cast iron) is reviewed to develop attributes like maintenance cost, spare part inventory, corrosion, and repair data. Based on this information, the future expected damage rate was forecast. The cost of managing the future damage was compared with the cost to replace (in kind and with upgraded materials. A decision optimization scheme was developed to choose the least cost option from: a) Run as-is and repair; b) replace in kind; or c) replace with upgraded material and better design. In the second example, life cycle management techniques were developed for a ceilcote lined steel pipe cooling water system. Screens (fixed and traveling), filters, pumps, motors, valves, and piping were evaluated. (author)

Relation Between Hertz Stress-Life Exponent, Ball-Race Conformity, and Ball Bearing Life

Science.gov (United States)

Zaretsky, Erwin V.; Poplawski, Joseph V.; Root, Lawrence E.

2008-01-01

ANSI/ABMA and ISO standards based on Lundberg-Palmgren bearing life theory are normalized for ball bearings having inner- and outerrace conformities of 52 percent (0.52) and made from pre-1940 bearing steel. The Lundberg-Palmgren theory incorporates an inverse 9th power relation between Hertz stress and fatigue life for ball bearings. The effect of race conformity on ball set life independent of race life is not incorporated into the Lundberg-Palmgren theory. In addition, post-1960 vacuum-processed bearing steel exhibits a 12th power relation between Hertz stress and life. The work reported extends the previous work of Zaretsky, Poplawski, and Root to calculate changes in bearing life--that includes the life of the ball set--caused by race conformity, Hertz stress-life exponent, ball bearing type and bearing series. The bearing fatigue life in actual application will usually be equal to or greater than that calculated using the ANSI/ABMA and ISO standards that incorporate the Lundberg-Palmgren theory. The relative fatigue life of an individual race is more sensitive to changes in race conformity for Hertz stress-life exponent n of 12 than where n = 9. However, when the effects are combined to predict actual bearing life for a specified set of conditions and bearing geometry, the predicted life of the bearing will be greater for a value of n = 12 than n = 9.

Operational reliability of high pressure steam lines of pearlitic steels after 150-200 thousand h service

International Nuclear Information System (INIS)

Veksler, E.Ya.; Chajkovskij, V.M.; Osasyuk, V.V.

1980-01-01

Usage of both calculational and physical methods is recommended to estimate a service operating life of long-term working steam line materials. Application of these methods is demonstrated when studying steam line bends made of 12MKh and 12Kh1MF pearlitic steels. Good coincidence of results for the determination of residual durability of steam lines is obtained using these two methods [ru

Microcomputer generated pipe support calculations

International Nuclear Information System (INIS)

Hankinson, R.F.; Czarnowski, P.; Roemer, R.E.

1991-01-01

The cost and complexity of pipe support design has been a continuing challenge to the construction and modification of commercial nuclear facilities. Typically, pipe support design or qualification projects have required large numbers of engineers centrally located with access to mainframe computer facilities. Much engineering time has been spent repetitively performing a sequence of tasks to address complex design criteria and consolidating the results of calculations into documentation packages in accordance with strict quality requirements. The continuing challenges of cost and quality, the need for support engineering services at operating plant sites, and the substantial recent advances in microcomputer systems suggested that a stand-alone microcomputer pipe support calculation generator was feasible and had become a necessity for providing cost-effective and high quality pipe support engineering services to the industry. This paper outlines the preparation for, and the development of, an integrated pipe support design/evaluation software system which maintains all computer programs in the same environment, minimizes manual performance of standard or repetitive tasks, and generates a high quality calculation which is consistent and easily followed

The Association Between Home Palliative Care Services and Quality of End-of-Life Care Indicators in the Province of Québec.

Science.gov (United States)

Gagnon, Bruno; Nadeau, Lyne; Scott, Susan; Dumont, Serge; MacDonald, Neil; Aubin, Michèle; Mayo, Nancy

2015-07-01

In Canada, governments have increased spending on home care to promote better end-of-life care. In the province of Québec, Canada, home palliative care (PC) services (HPCS) are provided by Public Local Community-Based Health Care Service providers (Centres Locaux de Services Communautaires [CLSC]) with universal coverage. Accordingly, there should be no regional variations of these services and their effect on quality of end-of-life PC (QEoLPC) indicators. To test if all the CLSCs provided the same level of HPCS to cancer patients in the province of Québec, Canada, and the association between level of HPCS and QEoLPC indicators. Characteristics of 52,316 decedents with cancer were extracted from administrative databases between 2003 and 2006. Two gender-specific "adjusted performance of CLSCs in delivering HPCS" models were created using gender-specific hierarchical regression adjusted for patient and CLSC neighborhood characteristics. Using the same approach, the strength of the association between the adjusted performance of CLSCs in delivering HPCS and the QEoLPC indicators was estimated. Overall, 27,255 (52.1%) decedents had at least one HPCS. Significant variations in the adjusted performance of CLSC in delivering HPCS were found. Higher performance led to a lower proportion of men having more than one emergency room visit during the last month of life (risk ratio [RR] 0.924; 95% CI 0.867-0.985), and for women, a higher proportion dying at home (RR 2.255; 95% CI 1.703-2.984) and spending less time in hospital (RR 0.765; 95% CI 0.692-0.845). Provision of HPCS remained limited in Québec, but when present, they were associated with improved QEoLPC indicators. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

On the value of SHM in the context of service life integrity management

DEFF Research Database (Denmark)

Qin, Jianjun; Thöns, Sebastian; Faber, Michael Havbro

2015-01-01

This paper addresses the optimization of structural health monitoring(SHM) before its implementation on the basis of its Value of Information (VoI). The approach for the quantification of the value of SHM builds upon a service life cost assessment and generic structural performance model...... in conjunction with the observation, i.e. monitoring, of deterioration increments. The structural performance is described with a generic deterioration model to be calibrated to the relevant structural deterioration mechanism, such as e.g. fatigue and corrosion. The generic deterioration model allows...... for the incorporation of monitored damage increments and accounts for the precision of the data by considering the statistical uncertainties, i.e. the amount of monitoring data due to the monitoring period, and by considering the measurement uncertainty. The value of structural health monitoring is then quantified...

Are satisfaction with and self-management of personal assistance services associated with the life satisfaction of persons with physical disabilities?

Science.gov (United States)

Fleming-Castaldy, Rita P

2011-01-01

To examine the relationships between satisfaction with and self-management of personal assistance services (PAS) and the quality of life (QoL) of persons with disabilities. To test the postulate that consumer-directed PAS can fulfil the human need for control and contribute to a satisfactory life. A survey compared the perspectives of persons using consumer-directed PAS versus those using agency-directed. A Personal Data Form obtained demographics and PAS characteristics. The Quality of Life Inventory measured life satisfaction. A PAS questionnaire measured perceptions about the management of, desire for control of, and satisfaction with PAS. Data were analysed using SPSS®- 14. Significant relationships were found between QoL and satisfaction with PAS (p perceived control of PAS and satisfaction with PAS (p satisfaction with their PAS (p satisfaction, and QoL support the value of consumer-directed programmes. Rehabilitation professionals can use this knowledge to develop, implement and research practises that enable self-management.

21 CFR 868.1890 - Predictive pulmonary-function value calculator.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Predictive pulmonary-function value calculator... SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1890 Predictive pulmonary-function value calculator. (a) Identification. A predictive pulmonary-function value calculator is...

42 CFR 410.40 - Coverage of ambulance services.

Science.gov (United States)

2010-10-01

..., which are defined in § 414.605 of this chapter: (1) Basic life support (BLS) (emergency and nonemergency). (2) Advanced life support, level 1 (ALS1) (emergency and nonemergency). (3) Advanced life support... Coverage of ambulance services. (a). Basic rules. Medicare Part B covers ambulance services if the...

Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

DEFF Research Database (Denmark)

Schipull Kauschen, Jan

2012-01-01

extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...... on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...

Personalized risk communication for personalized risk assessment: Real world assessment of knowledge and motivation for six mortality risk measures from an online life expectancy calculator.

Science.gov (United States)

Manuel, Douglas G; Abdulaziz, Kasim E; Perez, Richard; Beach, Sarah; Bennett, Carol

2018-01-01

In the clinical setting, previous studies have shown personalized risk assessment and communication improves risk perception and motivation. We evaluated an online health calculator that estimated and presented six different measures of life expectancy/mortality based on a person's sociodemographic and health behavior profile. Immediately after receiving calculator results, participants were invited to complete an online survey that asked how informative and motivating they found each risk measure, whether they would share their results and whether the calculator provided information they need to make lifestyle changes. Over 80% of the 317 survey respondents found at least one of six healthy living measures highly informative and motivating, but there was moderate heterogeneity regarding which measures respondents found most informative and motivating. Overall, health age was most informative and life expectancy most motivating. Approximately 40% of respondents would share the results with their clinician (44%) or social networks (38%), although the information they would share was often different from what they found informative or motivational. Online personalized risk assessment allows for a more personalized communication compared to historic paper-based risk assessment to maximize knowledge and motivation, and people should be provided a range of risk communication measures that reflect different risk perspectives.

Effect of a home-based end-of-life nursing service on hospital use at the end of life and place of death: a study using administrative data and matched controls.

Science.gov (United States)

Chitnis, X A; Georghiou, T; Steventon, A; Bardsley, M J

2013-12-01

To assess the effect of routinely delivered home-based end-of-life care on hospital use at the end of life and place of death. Retrospective analysis using matched controls and administrative data. Community-based care in England. 29,538 people aged over 18 who received Marie Curie nursing support compared with 29,538 controls individually matched on variables including: age, socioeconomic deprivation, prior hospital use, number of chronic conditions and prior diagnostic history. Home-based end-of-life nursing care delivered by the Marie Curie Nursing Service (MCNS), compared with end-of-life care available to those who did not receive MCNS care. Proportion of people who died at home; numbers of emergency and elective inpatient admissions, outpatient attendances and attendances at emergency departments in the period until death; and notional costs of hospital care. Intervention patients were significantly more likely to die at home and less likely to die in hospital than matched controls (unadjusted OR 6.16, 95% CI 5.94 to 6.38, pnursing for longer. Home-based end-of-life care offers the potential to reduce demand for acute hospital care and increase the number of people able to die at home.

The value of the world's ecosystem services and natural capital

International Nuclear Information System (INIS)

Costanza, Robert; D'Arge, Ralph; Groot, Rudolf de; Farber, Stephen; Grasso, Monica; Hannon, Bruce; Limburg, Karin; Naeem, Shahid; O'Neill, Robert V.; Paruelo, Jose; Raskin, Robert G.; Sutton, Paul; Belt, Marjan van den

1998-01-01

The services of ecological systems and the natural capital stocks that produce them are critical to the functioning of the Earth's life-support system. They contribute to human welfare, both directly and indirectly, and therefore represent part of the total economic value of the planet. We have estimated the current economic value of 17 ecosystem services for 16 biomes, based on published studies and a few original calculations. For the entire biosphere, the value (most of which is outside the market) is estimated to be in the range of US$ 16-54 trillion (10 12 ) per year, with an average of US$ 33 trillion per year. Because of the nature of the uncertainties, this must be considered a minimum estimate. Global gross national product total is around US$ 18 trillion per year

Compilation of the calculation elements of the electronic equipments reliability; Recueil des elements de calcul de la fiabilite des equipements electroniques

Energy Technology Data Exchange (ETDEWEB)

Lefevre, R.; D' Harcourt, A.; Dupuy, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

The aim of this work is to allow the practical execution of the estimated calculation of the electronic devices reliability and to standardize the source and the approach of the calculations while giving a systematic character to their execution mode. The systematic character of the calculations allows a comparison of the reliability of different materials and a rapid control of the calculations validity; at last, it brings out the use conditions of all the components of a set. A reliability calculation made according to the method described here reveals: -components badly used -the relative influence on the reliability of the set, of a component or a components group taking into account of the number, of the characteristics and of the use of these ones. At last, the results of the calculation allows to organize the exploitation (availability) and the maintenance (staff, stock of components) of the materials. The failure rates given in this book are only relating to the components service-life and do not correspond to precocious failures. (authors) [French] L'objet du present recueil est d'une part de permettre l'execution pratique du calcul previsionnel de la fiabilite des equipements electroniques et d'autre part d'uniformiser l'origine et la presentation de calculs en donnant un caractere systematique a leur mode d'execution. Le caractere systematique des calculs permet une comparaison de la fiabilite de differents materiels et un controle rapide de la validite des calculs; enfin il met en relief les conditions d'utilisation de tous les composants d'un ensemble. Un calcul de fiabilite realise selon la methode preconise par ce document permet la mise en evidence: -des composants mal utilises -de l'influence relative sur la fiabilite de l'ensemble, d'un composant ou d'un groupe de composants compte tenu du nombre, des caracteristiques et de l'utilisation de ceux-ci. Enfin, les resultats du

A study comparing changes in loading conditions of an extended service life system using aluminum 2024-T351

Science.gov (United States)

Beal, Roger Zack

The current fiscally austere environment prevalent in the military and industry is driving extreme measures to save money. In the United States Air Force, this has driven enormous efforts to trim sustainment spending on extended life aircraft. The challenge to the aerospace engineer is to ensure flight safety in the midst of this economic pressure. One method of cutting costs is to increase the time an aircraft is in service by delaying the point when the aircraft is taken out of service for depot maintenance. To ensure flight safety, in depth fatigue and fracture analysis needs to be accomplished to assess increasing the inspection interval. The purpose of this study was to determine the sensitivity of Aluminum 2024-T351 alloy, a common material used in tension dominated aerospace applications, to two different loading spectra---one that is aggressive and the other that is benign. This was accomplished by conducting five different combinations of the two spectra, developing computer simulations using the AFGROW software and comparing with the measured data. The results showed that the material demonstrated significantly different behavior between the two spectra. These results provide a valuable tool for the aerospace engineer for fatigue life prediction and inspection interval evaluation.

On using continuoas Markov processes for unit service life evaluation taking as an example the RBMK-1000 gate-regulating valve

International Nuclear Information System (INIS)

Klemin, A.I.; Emel'yanov, V.S.; Rabchun, A.V.

1984-01-01

A technique is sugfested for estimating service life indices of equipment based on describing the process of the equipment ageing by continuous Markov diffusion process. It is noted that a number of problems on estimating durability indices of products is reduced to problems of estimating characteristics of the time of the first attainment of the preset boundary (boundaries) by a random process describing the ageing of a product. The methods of statistic estimation of the drift and diffusion coefficient in the continuous Markov diffusion process are considered formulae for their point and interval estimates are presented. A special description is given for a case of a stationary process and determining in this case mathematical expectation and dispersion of the time of the first attainment of a boundary (boundaries). The method of numerical simulation of the diffusion process with constant drift and diffusion coefficients is also described; results obtained on the basis of such a simulation are discussed. An example of using the suggested technique for quantitative estimate of the service life for the RBMK-1000 gate-regulating value is given

Analysis of Social Return on Investment in two systems of support for people with severe disabilities: personal assistance and residential service. A case study

Directory of Open Access Journals (Sweden)

Agustín Huete García

2014-06-01

Full Text Available At present, there are several alternatives to support daily life of people with disabilities, which require different resources: human, institutional, technical, material, financial, etc. In addition, these alternatives involve different impacts on both the life of people with disabilites and their immediate environment. This paper presents a case study that compares an user of personal assistance services of the Program for Independent Living (PAVI with an user of a residential service. The study method used is based on the approach of Social Return on Investment (SROI. It also specifies the selection of cases, the partners consulted to gather concepts and values, data collection, variables and formulas for calculating and monetization. Despite its limited scope, it is possible to draw conclusions about the social return on investment in a “standard profile” receiving personal assistance services compared with a “standard profile” in a residential service.

Parametric calculations of fatigue-crack growth in piping

International Nuclear Information System (INIS)

Simonen, F.A.; Goodrich, C.W.

1983-06-01

This study presents calculations of the growth of piping flaws produced by fatigue. Flaw growth was predicted as a function of the initial flaw size, the level and number of stress cycles, the piping material, and environmental factors. The results indicate that the present flaw acceptance standards of ASME Section XI provide a relatively consistent set of allowable flaw sizes because the predicted life of flawed piping is relatively insensitive to pipe wall thickness, flaw aspect ratio, and piping material (ferritic versus austenitic). On the other hand, the results show that flaws that are acceptable under ASME Section XI can grow at unacceptable rates if the cyclic stresses are at the maximum level permitted by the design rules of ASME Section III. However, a review of the conservatisms inherent to the ASME code rules is presented to explain the low occurrence of piping fatigue failures in service. It is concluded that decreases in the allowable flaw sizes are not justified

Mass Customization Services

DEFF Research Database (Denmark)

Friedrich, Gerhard

Topics of the IMCM’08 & PETO’08 and this book are: Mass customization in service, mass customizing financial services, mass customization in supply networks, implementation issues in logistics, product life cycle and mass customization. The research field of mass customization is more than 15 years...

Computer Aided Product Service Systems Design : Service CAD and Its integration with Life Cycle Simulation

NARCIS (Netherlands)

Komoto, H.

2009-01-01

Integration of product design into service design, or vice versa, is considered to bring more efficient and effective value addition. Besides EcoDesign tools and methods, a methodology to design such an integration of products and services from a systemic perspective, or product-service systems

Inverse load calculation procedure for offshore wind turbines and application to a 5-MW wind turbine support structure: Inverse load calculation procedure for offshore wind turbines

Energy Technology Data Exchange (ETDEWEB)

Pahn, T. [Pahn Ingenieure, Am Seegraben 17b 03051 Cottbus Germany; Rolfes, R. [Institut f?r Statik und Dynamik, Leibniz Universit?t Hannover, Appelstra?e 9A 30167 Hannover Germany; Jonkman, J. [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden Colorado 80401 USA

2017-02-20

A significant number of wind turbines installed today have reached their designed service life of 20 years, and the number will rise continuously. Most of these turbines promise a more economical performance if they operate for more than 20 years. To assess a continued operation, we have to analyze the load-bearing capacity of the support structure with respect to site-specific conditions. Such an analysis requires the comparison of the loads used for the design of the support structure with the actual loads experienced. This publication presents the application of a so-called inverse load calculation to a 5-MW wind turbine support structure. The inverse load calculation determines external loads derived from a mechanical description of the support structure and from measured structural responses. Using numerical simulations with the software fast, we investigated the influence of wind-turbine-specific effects such as the wind turbine control or the dynamic interaction between the loads and the support structure to the presented inverse load calculation procedure. fast is used to study the inverse calculation of simultaneously acting wind and wave loads, which has not been carried out until now. Furthermore, the application of the inverse load calculation procedure to a real 5-MW wind turbine support structure is demonstrated. In terms of this practical application, setting up the mechanical system for the support structure using measurement data is discussed. The paper presents results for defined load cases and assesses the accuracy of the inversely derived dynamic loads for both the simulations and the practical application.

Influence of accessibility of services on Quality of Life of school children with Cerebral Palsy in Latvia

Directory of Open Access Journals (Sweden)

Cibule L.

2012-10-01

Full Text Available The aim of the study was to investigate the influence of accessibility of services and health related factors on Quality of Life (QoL of school children with Cerebral Palsy (CP in Latvia. 80 children 47 boys and 33 girls with CP and their parents from all regions of Latvia took part in the study. Mean age of participants was 11,7 (SD± 3,5 years. 50 children without diagnosed chronic diseases formed the control group. Validated evaluation tools were used in the study (KIDSCREEN-52, GMFCS- E&R. The results show lower QoL in children with CP in comparison with their healthy peers and European children. QoL is influenced by the level of gross motor functions, lack of coordination of services, lack of rehabilitation infrastructure and presence of environmental barriers in Latvia.

Extending service life of steam generators by sleeving tubes

International Nuclear Information System (INIS)

Gutzwiller, J.E.

1982-01-01

Steam generator tubes that are failing due to IGA in the tubesheet crevice can be kept in service by using the basic sealable sleeve design developed by BandW. Variations of the present sleeve design could significantly reduce the number of tubes that must be plugged each year. Sleeving had the potential of keeping 28 percent more tubes in service during 1979. Lowering the overall rate at which tubes are removed from service by plugging will reduce the probability of having to derate the plant or replace the steam generator. Considering tomorrow's replacement power costs, sleeving to keep tubes in service is a practical and sound investment

The importance of content and face validity in instrument development: lessons learnt from service users when developing the Recovering Quality of Life measure (ReQoL).

Science.gov (United States)

Connell, Janice; Carlton, Jill; Grundy, Andrew; Taylor Buck, Elizabeth; Keetharuth, Anju Devianee; Ricketts, Thomas; Barkham, Michael; Robotham, Dan; Rose, Diana; Brazier, John

2018-07-01

Service user involvement in instrument development is increasingly recognised as important, but is often not done and seldom reported. This has adverse implications for the content validity of a measure. The aim of this paper is to identify the types of items that service users felt were important to be included or excluded from a new Recovering Quality of Life measure for people with mental health difficulties. Potential items were presented to service users in face-to-face structured individual interviews and focus groups. The items were primarily taken or adapted from current measures and covered themes identified from earlier qualitative work as being important to quality of life. Content and thematic analysis was undertaken to identify the types of items which were either important or unacceptable to service users. We identified five key themes of the types of items that service users found acceptable or unacceptable; the items should be relevant and meaningful, unambiguous, easy to answer particularly when distressed, do not cause further upset, and be non-judgemental. Importantly, this was from the perspective of the service user. This research has underlined the importance of service users' views on the acceptability and validity of items for use in developing a new measure. Whether or not service users favoured an item was associated with their ability or intention to respond accurately and honestly to the item which will impact on the validity and sensitivity of the measure.

Reactor calculation benchmark PCA blind test results

International Nuclear Information System (INIS)

Kam, F.B.K.; Stallmann, F.W.

1980-01-01

Further improvement in calculational procedures or a combination of calculations and measurements is necessary to attain 10 to 15% (1 sigma) accuracy for neutron exposure parameters (flux greater than 0.1 MeV, flux greater than 1.0 MeV, and dpa). The calculational modeling of power reactors should be benchmarked in an actual LWR plant to provide final uncertainty estimates for end-of-life predictions and limitations for plant operations. 26 references, 14 figures, 6 tables

Reactor calculation benchmark PCA blind test results

Energy Technology Data Exchange (ETDEWEB)

Kam, F.B.K.; Stallmann, F.W.

1980-01-01

Further improvement in calculational procedures or a combination of calculations and measurements is necessary to attain 10 to 15% (1 sigma) accuracy for neutron exposure parameters (flux greater than 0.1 MeV, flux greater than 1.0 MeV, and dpa). The calculational modeling of power reactors should be benchmarked in an actual LWR plant to provide final uncertainty estimates for end-of-life predictions and limitations for plant operations. 26 references, 14 figures, 6 tables.

The lifecontingencies Package: Performing Financial and Actuarial Mathematics Calculations in R

Directory of Open Access Journals (Sweden)

Giorgio Alfredo Spedicato

2013-11-01

Full Text Available It is possible to model life contingency insurances with the lifecontingencies R package, which is capable of performing financial and actuarial mathematics calculations. Its functions permit one to determine both the expected value and the stochastic distribution of insured benefits. Therefore, life insurance coverage can be priced and portfolios risk-based capital requirements can be assessed. This paper briefly summarizes the theory regarding life contingencies that is based on financial mathematics and demographic con- cepts. Then, with the aid of applied examples, it shows how the lifecontingencies package can be a useful tool for executing routine, deterministic, or stochastic calculations for life-contingencies actuarial mathematics.

Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services

Science.gov (United States)

Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen

2017-01-01

International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions. PMID:28429710

Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services

Science.gov (United States)

Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen

2017-04-01

International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions.

Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services.

Science.gov (United States)

Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen

2017-04-21

International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions.

Quality of Life in Europe

Directory of Open Access Journals (Sweden)

Norina Popovici

2016-01-01

Many times we wondered why people want a certain comfort in exchange for sacrifices on longterm: we want houses, cars, holidays, quality services. All our life we work and give up many tothings (maybe more important than achieving material benefits. It's about quality of life. In thispaper we analyzed the quality of life in Europe addressing several factors, such as subjective wellbeing,living standards and material constraints, work-life balance, family life and social life,health and education.

Life expectancy in bipolar disorder

DEFF Research Database (Denmark)

Kessing, Lars Vedel; Vradi, Eleni; Andersen, Per Kragh

2015-01-01

OBJECTIVE: Life expectancy in patients with bipolar disorder has been reported to be decreased by 11 to 20 years. These calculations are based on data for individuals at the age of 15 years. However, this may be misleading for patients with bipolar disorder in general as most patients have a later...... onset of illness. The aim of the present study was to calculate the remaining life expectancy for patients of different ages with a diagnosis of bipolar disorder. METHODS: Using nationwide registers of all inpatient and outpatient contacts to all psychiatric hospitals in Denmark from 1970 to 2012 we...... remaining life expectancy in bipolar disorder and that of the general population decreased with age, indicating that patients with bipolar disorder start losing life-years during early and mid-adulthood. CONCLUSIONS: Life expectancy in bipolar disorder is decreased substantially, but less so than previously...

Value Retention, Service Life, Use Intensity and Long-Term Productivity of Wood Chippers as Obtained from Contractor Records

Directory of Open Access Journals (Sweden)

Raffaele Spinelli

2017-12-01

Full Text Available Acknowledging the absence of up-to-date empirical data on the value retention, service life and annual use of chipping machinery, in 2017 the authors surveyed the records kept by 50 contractors offering biomass chipping services. The machine fleet and operations in this survey could be taken as representative for most of Europe, where the biomass sector is well established and is facing further expansion. Data collection included the whole chipping unit, comprised of chipper, carrier and loader. Manually-fed units were excluded from the survey. The data pointed at a service life up to and exceeding 10,000 h and 10 years, which relieved any concerns about poor durability. Value retention was good, and may exceed that of other mainstream forestry equipment. Engine power was the main explanatory variable in any models to predict purchase price and productivity. The effect of this variable could explain most of the variability (>80% in the purchase price and productivity data. Results also pointed at the essential equivalence in price and productivity between PTO-driven (i.e., tractor powered and independent-engine chippers, once differences in engine power are accounted for. However, the distribution of purchase price between different components of the chipping unit was different between the two unit types, with the chipper accounting for a larger proportion of the total investment in independent-engine units. Machine power was also different, with most PTO-driven units being significantly smaller than independent-engine units, due to the limitations of existing tractors. Furthermore, half of the carriers assigned to a PTO-driven unit were subject to flexible use, i.e., they were not solely used for chipping work.

A Hybrid Artificial Reputation Model Involving Interaction Trust, Witness Information and the Trust Model to Calculate the Trust Value of Service Providers

Directory of Open Access Journals (Sweden)

Gurdeep Singh Ransi

2014-02-01

Full Text Available Agent interaction in a community, such as the online buyer-seller scenario, is often uncertain, as when an agent comes in contact with other agents they initially know nothing about each other. Currently, many reputation models are developed that help service consumers select better service providers. Reputation models also help agents to make a decision on who they should trust and transact with in the future. These reputation models are either built on interaction trust that involves direct experience as a source of information or they are built upon witness information also known as word-of-mouth that involves the reports provided by others. Neither the interaction trust nor the witness information models alone succeed in such uncertain interactions. In this paper we propose a hybrid reputation model involving both interaction trust and witness information to address the shortcomings of existing reputation models when taken separately. A sample simulation is built to setup buyer-seller services and uncertain interactions. Experiments reveal that the hybrid approach leads to better selection of trustworthy agents where consumers select more reputable service providers, eventually helping consumers obtain more gains. Furthermore, the trust model developed is used in calculating trust values of service providers.

LifeSteps: An Evidence-based Health Promotion Program for Underserved Populations – A Community Service Learning Approach

Directory of Open Access Journals (Sweden)

Melanie Austin-McCain

2015-04-01

Full Text Available Chronic diseases are the most common, costly, and preventable of all health problems in the United States. Chronic diseases represent the leading causes of death and are experienced at higher rates by minority populations (CDC, 2012. Innovative community-based health promotion programs are recommended that meet the diverse needs of underserved populations (Yeary, et al., 2011. LifeSteps is being developed as an evidence-based health promotion program focusing on health and wellness, a domain area defined within the Occupational Therapy Practice Framework (OTPF, 2008. LifeSteps will utilize a client-centered approach to coach individuals in making health behavior changes. Fieldwork and service-learning components are incorporated integrating clinical practice, academic study, and collaboration with community providers. Program evaluation measures based on the Transtheoretical Model (TTM have been identified to address all phases of program planning. The LifeSteps health promotion program aligns with local, national, and international objectives and addresses the need for programs that meet the diverse needs of underserved populations. Occupational therapists are in a unique position for implementing community-based interventions that promote health and contribute to a healthier society.

The soil life cycle

NARCIS (Netherlands)

Leeuwen, van J.P.

2016-01-01

Soil is one of the most important natural resource for life on Earth and provides important ecosystem services, such as food production, carbon sequestration, water regulation and contaminant attenuation. Soil quality, defined as the soil’s ability to provide these services, is drastically

The effectiveness of communication-skills training interventions in end-of-life noncancer care in acute hospital-based services: A systematic review.

Science.gov (United States)

Lord, Laura; Clark-Carter, David; Grove, Amy

2016-08-01

A systematic review was conducted in order to explore the effectiveness of communication-skills training interventions in end-of-life care with noncancer acute-based healthcare staff. Articles were included if they (1) focused on communication-skills training in end-of-life/palliative care for noncancer acute-based staff and (2) reported an outcome related to behavior change with regard to communication. Sixteen online databases were searched, which resulted in 4,038 potential articles. Screening of titles left 393 articles that met the inclusion criteria. Abstracts (n = 346) and full-text articles (n = 47) were reviewed, leaving 10 papers that met the criteria for our review. All articles explored the effect of communication-skills training on aspects of staff behavior; one study measured the effect on self-efficacy, another explored the impact on knowledge and competence, and another measured comfort levels in discussing the end of life with patients/families. Seven studies measured a number of outcomes, including confidence, attitude, preparedness, stress, and communication skills. Few studies have focused on end-of-life communication-skills training in noncancer acute-based services. Those that do have report positive effects on staff behavior with regard to communication about the end of life with patients and families. The studies varied in terms of the population studied and the health services involved, and they scored only moderately or weakly on quality. It is a challenge to draw a definite conclusion about the effectiveness of training interventions in end-of-life communication because of this. However, the findings from our review demonstrate the potential effectiveness of a range of training interventions with healthcare professionals on confidence, attitude, self-efficacy, and communication skills. Further research is needed to fully explore the effectiveness of existing training interventions in this population, and evidence using objective measures

Multi-objective optimization of swash plate forging process parameters for the die wear/service life improvement

Science.gov (United States)

Hu, X. F.; Wang, L. G.; Wu, H.; Liu, S. S.

2017-12-01

For the forging process of the swash plate, the author designed a kind of multi-index orthogonal experiment. Based on the Archard wear model, the influences of billet temperature, die temperature, forming speed, top die hardness and friction coefficient on forming load and die wear were numerically simulated by DEFORM software. Through the analysis of experimental results, the best forging process parameters were optimized and determined, which could effectively reduce the die wear and prolong the die service life. It is significant to increase the practical production of enterprise, especially to reduce the production cost and to promote enterprise profit.

A computational approach for thermomechanical fatigue life prediction of dissimilarly welded superheater tubes

Energy Technology Data Exchange (ETDEWEB)

Krishnasamy, Ram-Kumar; Seifert, Thomas; Siegele, Dieter [Fraunhofer-Institut fuer Werkstoffmechanik (IWM), Freiburg im Breisgau (Germany)

2010-07-01

In this paper a computational approach for fatigue life prediction of dissimilarly welded superheater tubes is presented and applied to a dissimilar weld between tubes made of the nickel base alloy Alloy617 tube and the 12% chromium steel VM12. The approach comprises the calculation of the residual stresses in the welded tubes with a multi-pass dissimilar welding simulation, the relaxation of the residual stresses in a post weld heat treatment (PWHT) simulation and the fatigue life prediction using the remaining residual stresses as initial condition. A cyclic fiscoplasticity model is used to calculate the transient stresses and strains under thermocyclic service loadings. The fatigue life is predicted with a damage parameter which is based on fracture mechanics. The adjustable parameters of the model are determined based on LCF and TMF experiments. The simulations show, that the residual stresses that remain after PWHT further relax in the first loading cycles. The predicted fatigue lives depend on the residual stresses and, thus, on the choice of the loading cycle in which the damage parameter is evaluated. It the first loading cycle, where residual stresses are still present, is considered, lower fatigue lives are predicted compared to predictions considering loading cycles with relaxed residual stresses. (orig.)

A study on relationship between quality of work life and job satisfaction

Directory of Open Access Journals (Sweden)

Heydar Mohammadi

2013-10-01

Full Text Available A healthy and good work condition is often involved with other factors such as leadership style, management, etc. In this paper, we present an empirical investigation to study the effects of the quality of work life on job satisfaction. The study uses a standard questionnaire and distributes it among all 86 full time employees of two governmental agencies in Iran, Supreme Audit Court and Interior Ministry, and Cronbach alphas has been calculated as 0.92. The main hypothesis of this survey considers the relationship between job satisfaction and quality of work life and there. There are also eleven sub-hypotheses associated with this survey including fair and sufficient payment, safe and healthy work conditions, equal job opportunities, rule of law, service training, integration and social cohesion, human development capabilities, organizational structure, delegation of authority, job satisfaction and employee participation. The results of survey have confirmed that there were some meaningful relationships between the quality of work life on job satisfaction in both organizations.

R and D in support of CANDU plant life management

International Nuclear Information System (INIS)

Tapping, R.L.; Holt, R.A.

1999-01-01

One of the keys to the long-term success of CANDUs is a high capacity factor over the station design life. Considerable R and D in underway at AECL to develop technologies for assessing, monitoring and mitigating the effect of plant ageing and for improving plant performance and extending plant life. To achieve longer service life and to realize high capacity factor from CANDU stations, AECL is developing new technologies to enhance fuel channel and steam generator inspection capabilities, to monitor system health, and to allow preventive maintenance and cleaning (e.g., on-line chemical cleaning processes that produce small volumes of wastes). The life management strategy for fuel channels and steam generators requires a program to inspect components on a routine basis to identify mechanisms that could potentially affect fitness-for-service. In the case of fuel channels, the strategy includes inspections for dimensional changes, flaw detection, and deuterium concentration. New techniques are been developed to enhance these inspection capabilities; examples include accurate measurement of the gap between a pressure tube and its calandria tube and rapid full-length inspections of steam generator tubes for all known flaw types. Central to life management of components are Fitness-for-Service Guidelines (FFSG) that have been developed with the CANDU Owners Group (COG) that provide a standardized method to assess the potential for propagation of flaws detected during in-service inspections, and assessment of any change in fracture characteristics of the material. FFSG continue to be improved with the development of new technologies such as the capability to credit relaxation of stresses due to creep and non-rejectable flaws in pressure tubes. Effective management of plant systems throughout their lifetime requires much more than data acquisition and display - it requires that system health is continually monitored and managed. AECL has developed a system Health Monitor

Influence of Working Environment on Fatigue Life Time Duration for Runner Blades of Kaplan Turbines

Directory of Open Access Journals (Sweden)

Ana-Maria Budai

2010-10-01

Full Text Available The paper present an analytical analyzes refer to influence of working environment on life time duration in service of runner blades of Kaplan turbines. The study are made using only analytical method, the entry dates being obtained from measurements made in situ for a Kaplan turbine. To calculate the maximum number of stress cycles whereupon the runner blades work without any damage it was used an analytical relation known in specialized literatures under the name of Morrow’s relation. To estimate fatigue life time duration will be used a formula obtained from one of most common cumulative damage methodology taking in consideration the real exploitation conditions of a specified Kaplan turbine.

Global Mapping of Provisioning Ecosystem Services

Science.gov (United States)

Bingham, Lisa; Straatsma, Menno; Karssenberg, Derek

2016-04-01

Attributing monetary value to ecosystem services for decision-making has become more relevant as a basis for decision-making. There are a number of problematic aspects of the calculations, including consistency of economy represented (e.g., purchasing price, production price) and determining which ecosystem subservices to include in a valuation. While several authors have proposed methods for calculating ecosystem services and calculations are presented for global and regional studies, the calculations are mostly broken down into biomes and regions without showing spatially explicit results. The key to decision-making for governments is to be able to make spatial-based decisions because a large spatial variation may exist within a biome or region. Our objective was to compute the spatial distribution of global ecosystem services based on 89 subservices. Initially, only the provisioning ecosystem service category is presented. The provisioning ecosystem service category was calculated using 6 ecosystem services (food, water, raw materials, genetic resources, medical resources, and ornaments) divided into 41 subservices. Global data sets were obtained from a variety of governmental and research agencies for the year 2005 because this is the most data complete and recent year available. All data originated either in tabular or grid formats and were disaggregated to 10 km cell length grids. A lookup table with production values by subservice by country were disaggregated over the economic zone (either marine, land, or combination) based on the spatial existence of the subservice (e.g. forest cover, crop land, non-arable land). Values express the production price in international dollars per hectare. The ecosystem services and the ecosystem service category(ies) maps may be used to show spatial variation of a service within and between countries as well as to specifically show the values within specific regions (e.g. countries, continents), biomes (e.g. coastal, forest

Improving health related quality of life among rural hypertensive patients through the integrative strategy of health services delivery: a quasi-experimental trial from Chongqing, China.

Science.gov (United States)

Miao, Yudong; Zhang, Liang; Sparring, Vibeke; Sandeep, Sandeep; Tang, Wenxi; Sun, Xiaowei; Feng, Da; Ye, Ting

2016-08-23

Integrative strategy of health services delivery has been proven to be effective in economically developed countries, where the healthcare systems have enough qualified primary care providers. However rural China lacks such providers to act as gatekeeper, besides, Chinese rural hypertensive patients are usually of old age, more likely to be exposed to health risk factors and they experience a greater socio-economic burden. All these Chinese rural setting specific features make the effectiveness of integrative strategy of health services in improving health related quality of life among Chinese rural hypertensive patients uncertain. In order to assess the impact of integrative strategy of health services delivery on health related quality of life among Chinese rural hypertensive patients, a two-year quasi-experimental trial was conducted in Chongqing, China. At baseline the sample enrolled 1006 hypertensive patients into intervention group and 420 hypertensive patients into control group. Physicians from village clinics, town hospitals and county hospitals worked collaboratively to deliver multidisciplinary health services for the intervention group, while physicians in the control group provided services without cooperation. The quality of life was studied by SF-36 Scale. Blood pressures were reported by town hospitals. The Difference-in-Differences model was used to estimate the differences in SF-36 score and blood pressure of both groups to assess the impact. The study showed that at baseline there was no statistical difference in SF-36 scores between both groups. While at follow-up the intervention group scored higher in overall SF-36, Role Physical, Body Pain, Social Functioning and Role Emotional than the control group. The Difference-in-Differences result demonstrated that there were statistical differences in SF-36 total score (p = 0.011), Role Physical (p = 0.027), Social Functioning (p = 0.000), Role Emotional (p = 0.002) between both

Development of augmented reality system for servicing electromechanical equipment

Science.gov (United States)

Zhukovskiy, Y.; Koteleva, N.

2018-05-01

Electromechanical equipment is widely used. It is used in industrial enterprises, in the spheres of public services, in everyday life, etc. Maintenance servicing of electromechanical equipment is an important part of its life cycle. High-quality and timely service can extend the life of the electromechanical equipment. The creation of special systems that simplify the process of servicing electromechanical equipment is an urgent task. Such systems can shorten the time for maintenance of electrical equipment, and, therefore, reduce the cost of maintenance in general. This article presents an analysis of information on the operation of service services for maintenance and repair of electromechanical equipment, identifies the list of services, and estimates the time required to perform basic service operations. The structure of the augmented reality system is presented, the ways of interaction of the augmented reality system with the automated control systems working at the enterprise are presented.

Calculating expected years of life lost for assessing local ethnic disparities in causes of premature death

Directory of Open Access Journals (Sweden)

Katcher Brian S

2008-04-01

Full Text Available Abstract Background A core function of local health departments is to conduct health assessments. The analysis of death certificates provides information on diseases, conditions, and injuries that are likely to cause death – an important outcome indicator of population health. The expected years of life lost (YLL measure is a valid, stand-alone measure for identifying and ranking the underlying causes of premature death. The purpose of this study was to rank the leading causes of premature death among San Francisco residents, and to share detailed methods so that these analyses can be used in other local health jurisdictions. Methods Using death registry data and population estimates for San Francisco deaths in 2003–2004, we calculated the number of deaths, YLL, and age-standardized YLL rates (ASYRs. The results were stratified by sex, ethnicity, and underlying cause of death. The YLL values were used to rank the leading causes of premature death for men and women, and by ethnicity. Results In the years 2003–2004, 6312 men died (73,627 years of life lost, and 5726 women died (51,194 years of life lost. The ASYR for men was 65% higher compared to the ASYR for women (8971.1 vs. 5438.6 per 100,000 persons per year. The leading causes of premature deaths are those with the largest average YLLs and are largely preventable. Among men, these were HIV/AIDS, suicide, drug overdose, homicide, and alcohol use disorder; and among women, these were lung cancer, breast cancer, hypertensive heart disease, colon cancer, and diabetes mellitus. A large health disparity exists between African Americans and other ethnic groups: African American age-adjusted overall and cause-specific YLL rates were higher, especially for homicide among men. Except for homicide among Latino men, Latinos and Asians have comparable or lower YLL rates among the leading causes of death compared to whites. Conclusion Local death registry data can be used to measure, rank, and

Life cycle based dynamic assessment coupled with multiple criteria decision analysis

DEFF Research Database (Denmark)

Sohn, Joshua; Kalbar, Pradip; Birkved, Morten

2017-01-01

the service life of the building. This case study uses both the established and the coupled MCDA assessment methods to quantify and assess the balance of impacts between the production of mineral wool insulation versus the production of space heat. The use of TOPSIS method for calculating single scores......This work looks at coupling Life cycle assessment (LCA) with a dynamic inventory and multiple criteria decision analysis (MCDA) to improve the validity and reliability of single score results for complex systems. This is done using the case study of a representative Danish single family home over...... not matter which impact assessment is applied. However, for the scenarios where other impact categories vary inversely or independently from the climate change impact indicator, such as with renewable energy production, there is need for a more unconventional method, such as the TOPSIS method...

46 CFR 174.360 - Calculations.

Science.gov (United States)

2010-10-01

... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY SPECIAL RULES PERTAINING TO SPECIFIC VESSEL TYPES Special Rules Pertaining to Dry Cargo Ships § 174.360 Calculations. Each ship to... for that ship by the International Convention for the Safety of Life at Sea, 1974, as amended, chapter...

Predicting the residual life of plant equipment - Why worry

International Nuclear Information System (INIS)

Jaske, C.E.

1985-01-01

Predicting the residual life of plant equipment that has been in service for 20 to 30 years or more is a major concern of many industries. This paper reviews the reasons for increased concern for residual-life assessment and the general procedures used in performing such assessments. Some examples and case histories illustrating procedures for assessing remaining service life are discussed. Areas where developments are needed to improve the technology for remaining-life estimation are pointed out. Then, some of the critical issues involved in residual-life assessment are identified. Finally, the future role of residual-life prediction is addressed

Behavioral and quality-of-life outcomes in different service models for methadone maintenance treatment in Vietnam.

Science.gov (United States)

Tran, Bach Xuan; Nguyen, Long Hoang; Nong, Vuong Minh; Nguyen, Cuong Tat; Phan, Huong Thu Thi; Latkin, Carl A

2016-02-02

Integrating HIV/AIDS and methadone maintenance treatment (MMT) services with existing health care delivery system is critical in sustaining efforts to fight HIV/AIDS in large injection-driven epidemics. However, efficiency of different integrative service models is unknown. This study assessed behavioral and health-related quality-of-life (HRQOL) outcomes of MMT in four service delivery models and explored factors associated with these outcomes of interest. A cross-sectional survey was conducted in two HIV epicenters in Vietnam: Hanoi and Nam Dinh Province. All patients in five selected MMT clinics were invited to participate, and 1016 were interviewed (80-90% response rate). Respondents had a mean age of 35.8, taken MMT for average 16.5 months and 3.3% on MMT for 36-60 months. The MMT integrated with rural district health center (DHC) has the highest prevalence of concurrent drug use (11.3%). The percentage of condom use (last sexual intercourse) with primary and casual partners was lowest in the MMT at urban DHCs. Patients at the rural DHC reported very high proportions of pain/discomfort (37.8%), anxiety/depression (43.1%), and mobility (13.3%). In regression models, poorer HRQOL outcomes were found in MMT models in the rural areas or without general health care, and among those patients who were HIV positive, reported concurrent drug use, and had higher numbers of previous drug rehabilitation episodes. Mobility and anxiety/depression are factors that increased the likelihood of concurrent drug use among MMT patients. Outcomes of MMT were diverse across different integrative service models. Policies on rapid expansion of the MMT program in Vietnam should also emphasize on the integration with comprehensive health care services including psychological supports for patients.

'Silent voices' in health services research: ethnicity and socioeconomic variation in participation in studies of quality of life in childhood visual disability.

Science.gov (United States)

Tadic, Valerie; Hamblion, Esther Louise; Keeley, Sarah; Cumberland, Phillippa; Lewando Hundt, Gillian; Rahi, Jugnoo Sangeeta

2010-04-01

Purpose. To investigate patterns of participation of visually impaired (VI) children and their families in health services research. Methods. The authors compared clinical and sociodemographic characteristics of children and their families who participated with those who did not participate in two studies of quality of life (QoL) of VI children. In Study 1, the authors interviewed VI children and adolescents, aged 10 to 15 years, about their vision-related quality of life (VRQoL) as the first phase of a program to develop a VRQoL instrument for this population. One hundred seven children with visual impairment (visual acuity in the better eye LogMar worse than 0.51) were invited to participate in the interviews. Study 2 investigated health-related quality of life (HRQoL) of VI children using an existing generic instrument, administered in a postal survey. 151 VI children and adolescents, aged 2 to 16 years, with hereditary retinal disorders were invited to participate in the survey. Results. The overall participation level was below 50%. In both studies, participants from white ethnic and more affluent socioeconomic backgrounds were overrepresented. Participation did not vary by age, sex, or clinical characteristics. Conclusions. The authors suggest that there are barriers to participation in child- and family-centered research on childhood visual disability for children from socioeconomically deprived or ethnic minority groups. They urge assessment and reporting of participation patterns in further health services research on childhood visual disability. Failure to recognize that there are "silent voices" is likely to have important implications for equitable and appropriate service planning and provision for VI children.

Data as a service a framework for providing reusable enterprise data services

CERN Document Server

Sarkar, Pushpak

2015-01-01

Data as a Service shows how organizations can leverage "data as a service" by providing real-life case studies on the various and innovative architectures and related patterns. Comprehensive approach to introducing data as a service in any organization. A re-usable and flexible SOA based architecture framework. Roadmap to introduce 'big data as a service' for potential clients. Presents a thorough description of each component in the DaaS reference architecture so readers can implement solutions.

The effect of quality circles on job satisfaction and quality of work-life of staff in emergency medical services.

Science.gov (United States)

Hosseinabadi, Reza; Karampourian, Arezou; Beiranvand, Shoorangiz; Pournia, Yadollah

2013-10-01

Quality circles, as a participatory management technique, offer one alternative for dealing with frustration and discontent of today's workers. This study was conducted to investigate the effect of implementation of quality circles on nurses' quality of work-life and job satisfaction. In this study, two emergency medical services (EMS) of Hamedan province were selected and randomly assigned as the experimental and control groups. After the experimental group was trained and quality circles were established in this group, the levels of quality of work-life and job satisfaction were measured in the two groups. Then, the statistical analyses were performed using t-test. After the intervention, the results showed significant differences between the scores of motivational factors (p=0.001), the total scores of job satisfaction (p=0.003), and the scores of some quality of work life (QWL) conceptual categories including the use and development of capacities (p=0.008), the total space of life (p=0.003), and the total scores of QWL (p=0.031) in the experimental group compared to those in the control group. This study confirms the effectiveness of quality circles in improving quality of work-life and job satisfaction of nurses working in EMS, and offers their application as a management method that can be used by EMS managers. Copyright © 2012 Elsevier Ltd. All rights reserved.

Life cycle costing of waste management systems: overview, calculation principles and case studies.

Science.gov (United States)

Martinez-Sanchez, Veronica; Kromann, Mikkel A; Astrup, Thomas Fruergaard

2015-02-01

This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental impacts and the coverage of shadow prices, and there was also significant confusion regarding terminology. The presented cost model was implemented in two case study scenarios assessing the costs involved in the source segregation of organic waste from 100,000 Danish households and

Status, remaining service-life and quality assurance of PP-materials in flue-gas applications; Status, kvarvarande livslaengd och kvalitetssaekring av PP-material i anlaeggningar foer rening och kondensering av roekgaser

Energy Technology Data Exchange (ETDEWEB)

Jacobson, Karin

2011-10-15

Background: The project is intended to provide a better understanding of how the service life of PP-materials is affected when used in flue-gas applications. It intends to form a basis for the development of relevant techniques and a methodology from which it is possible to give advice and guidance so that the quality of PP-materials can be ensured for a given desired service life. In addition it aims as being able to assess the status and remaining life of PP-materials in current components. Project outline - An inventory, contact and choice of facilities for closer cooperation. Plants with high proportions of PP in the equipment have been prioritised. - Visits to the chosen sites during shut-down periods for inspection and collection of samples from different PP details for further analysis in the laboratory. Collection of operating data and experiences of the use of PP (operating time/exposure conditions in different parts, component substitutions that have been made, etc.). - Systematic studies of the processes and mechanisms for stabiliser consumption over time. - Developing methods and methodology on which advice and guidance can be based so that the quality of PP-materials can be ensured for a given desired service life. The goal is to be able to assess the status and remaining service-life of the PP-materials in flue-gas applications. Results and Conclusions: It has been found that corrosion is relatively rare and that the main factors limiting the use and longevity of polypropylene are the thermal properties (thermal expansion and heat distortion). Leaching of stabilisers from the material is also commonly found but only a few cases of oxidative degradation, as a result of this, have been observed. An important part of the project has been to develop techniques and methodologies to assure the quality PP-material for a desired service life, and to assess the status and remaining life of the PP- materials in flue-gas applications. To do this, samples that

Boiler-turbine life extension

Energy Technology Data Exchange (ETDEWEB)

Natzkov, S. [TOTEMA, Ltd., Sofia (Bulgaria); Nikolov, M. [CERB, Sofia (Bulgaria)

1995-12-01

The design life of the main power equipment-boilers and turbines is about 105 working hours. The possibilities for life extension are after normatively regulated control tests. The diagnostics and methodology for Boilers and Turbines Elements Remaining Life Assessment using up to date computer programs, destructive and nondestructive control of metal of key elements of units equipment, metal creep and low cycle fatigue calculations. As well as data for most common damages and some technical decisions for elements life extension are presented.

Accelerated life assessment of coating on the radar structure components in coastal environment.

Science.gov (United States)

Liu, Zhe; Ming, ZhiMao

2016-07-04

This paper aimed to build an accelerated life test scheme and carry out quantitative analysis between accelerated life test in the laboratory and actual service for the coating composed of epoxy primer and polyurethane paint on structure components of some kind of radar served in the coastal environment of South China Sea. The accelerated life test scheme was built based on the service environment and failure analysis of the coating. The quantitative analysis between accelerated life test and actual service was conducted by comparing the gloss loss, discoloration, chalking, blistering, cracking and electrochemical impedance spectroscopy of the coating. The main factors leading to the coating failure were ultraviolet radiation, temperature, moisture, salt fog and loads, the accelerated life test included ultraviolet radiation, damp heat, thermal shock, fatigue and salt spray. The quantitative relationship was that one cycle of the accelerated life test was equal to actual service for one year. It was established that one cycle of the accelerated life test was equal to actual service for one year. It provided a precise way to predict actual service life of newly developed coatings for the manufacturer.

Activity and Life After Survival of a Cardiac Arrest (ALASCA and the effectiveness of an early intervention service: design of a randomised controlled trial

Directory of Open Access Journals (Sweden)

Bakx Wilbert GM

2007-08-01

Full Text Available Abstract Background Cardiac arrest survivors may experience hypoxic brain injury that results in cognitive impairments which frequently remain unrecognised. This may lead to limitations in daily activities and participation in society, a decreased quality of life for the patient, and a high strain for the caregiver. Publications about interventions directed at improving quality of life after survival of a cardiac arrest are scarce. Therefore, evidence about effective rehabilitation programmes for cardiac arrest survivors is urgently needed. This paper presents the design of the ALASCA (Activity and Life After Survival of a Cardiac Arrest trial, a randomised, controlled clinical trial to evaluate the effects of a new early intervention service for survivors of a cardiac arrest and their caregivers. Methods/design The study population comprises all people who survive two weeks after a cardiac arrest and are admitted to one of the participating hospitals in the Southern part of the Netherlands. In a two-group randomised, controlled clinical trial, half of the participants will receive an early intervention service. The early intervention service consists of several consultations with a specialised nurse for the patient and their caregiver during the first three months after the cardiac arrest. The intervention is directed at screening for cognitive problems, provision of informational, emotional and practical support, and stimulating self-management. If necessary, referral to specialised care can take place. Persons in the control group will receive the care as usual. The primary outcome measures are the extent of participation in society and quality of life of the patient one year after a cardiac arrest. Secondary outcome measures are the level of cognitive, emotional and cardiovascular impairment and daily functioning of the patient, as well as the strain for and quality of life of the caregiver. Participants and their caregivers will be followed

Marketing concepts for pharmaceutical service development.

Science.gov (United States)

Grauer, D W

1981-02-01

Marketing concepts as a mechanism to help pharmacy develop, communicate, and sell future pharmaceutical services to consumers are discussed. Pharmacy as a profession must define itself broadly to take advantage of future growth opportunities. These growth opportunities will be realized from unmet health-care needs and changing consumer life style trends and values. New services must therefore be oriented toward consumers (i.e., patients, health professionals, and third-party agencies) to gain acceptance. Dispensing and drug-knowledge-distribution pharmaceutical services are reviewed by a product life cycle analysis of sales profits versus time. A marketing mix for new pharmaceutical services is developed consisting of service, price, distribution, and promotion strategies. Marketing can encompass those key elements necessary to meet the organizational goals of pharmacy and provide a systematic, disciplined approach for presenting a new service to consumers.

The factor of time in the life cycle assessment of housing

NARCIS (Netherlands)

Klunder, G.; van Nunen, H.

2003-01-01

Conducting life cycle assessments, or LCAs, involves many uncertainties, including those related to the factor of time. Time is very important in the environmental assessment of housing, because of the relatively long service life of houses. During a house's service life many changes occur, which

A quantitative calculation for software reliability evaluation

Energy Technology Data Exchange (ETDEWEB)

Lee, Young-Jun; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

To meet these regulatory requirements, the software used in the nuclear safety field has been ensured through the development, validation, safety analysis, and quality assurance activities throughout the entire process life cycle from the planning phase to the installation phase. A variety of activities, such as the quality assurance activities are also required to improve the quality of a software. However, there are limitations to ensure that the quality is improved enough. Therefore, the effort to calculate the reliability of the software continues for a quantitative evaluation instead of a qualitative evaluation. In this paper, we propose a quantitative calculation method for the software to be used for a specific operation of the digital controller in an NPP. After injecting random faults in the internal space of a developed controller and calculating the ability to detect the injected faults using diagnostic software, we can evaluate the software reliability of a digital controller in an NPP. We tried to calculate the software reliability of the controller in an NPP using a new method that differs from a traditional method. It calculates the fault detection coverage after injecting the faults into the software memory space rather than the activity through the life cycle process. We attempt differentiation by creating a new definition of the fault, imitating the software fault using the hardware, and giving a consideration and weights for injection faults.

Identification and documentation of persons being in palliative phase regardless of age, diagnosis and places of care, and their use of a sitting service at the end of life.

Science.gov (United States)

Wallerstedt, Birgitta; Sahlberg-Blom, Eva; Benzein, Eva; Andershed, Birgitta

2012-09-01

Older persons and persons with diseases other than cancer are often discriminated against when applying for palliative care despite growing numbers of both older persons and individuals with chronic diseases. An intention for palliative care in Sweden is that all persons in the final stage of life, irrespective of age, domicile, diagnosis, and care place shall have access to palliative care on equal terms. One way to support these persons in final stage of life and their relatives is to offer sitting service. To describe individuals who were identified and documented as being in a palliative phase in a Swedish municipality, with respect to demographics, use of a sitting service, continuity of care in the last month of life and the place of death. A second aim was to describe and compare the groups who received/did not receive sitting services related to the aforementioned variables. Retrospective data from nursing records and palliative care identification forms were analyzed with descriptive and analytic statistical methods. Among individuals deceased during 2007, 51% were identified and documented as being in palliative phase. The majority was older people (mean 83 years) with a noncancer diagnosis (58%). Twenty-eight individuals (16%) had received a sitting service between 8 and 249 hours (one extreme value = 2211). It is indicated that sitting service significantly increased the possibility of dying at home (p = 0.00004), but did not affect how often the place of care changed during the last month of life. A small sample from a Swedish context must be considered. These results can be related to an awareness in the municipality that led to adopting the concept of palliative care as not only for those with a cancer diagnosis. 2012 The Authors. Scandinavian Journal of Caring Sciences © 2012 Nordic College of Caring Science.

Successful outsourcing: improving quality of life through integrated support services.

Science.gov (United States)

Bates, Jason; Sharratt, Martin; King, John

2014-01-01

This article examines the way that non-clinical support services are provided in healthcare settings through outsourcing partnerships. The integrated support services model and benefits to patient experience and safety as well as organizational efficiency and effectiveness are explored through an examination of services at a busy urban community hospital.

Carbon sequestration through urban ecosystem services: A case study from Finland.

Science.gov (United States)

Kuittinen, Matti; Moinel, Caroline; Adalgeirsdottir, Kristjana

2016-09-01

Plants and soil are natural regulators of atmospheric CO2. Whereas plants sequester atmospheric carbon, soils deposit it for decades. As cities become increasingly more densely built, the available land area for such ecosystem services may decrease. We studied seven different housing areas in the Finnish city of Espoo to ascertain the extent to which site efficiency affects to the ecosystem services if the full life-cycle GHG emissions of these areas are taken into account. The results show that the impact of CO2 uptake through carbon sinks in growing plants and the uptake of soil organic carbon vary greatly. Its share of all emissions varied from a marginal value of 1.2% to a more considerable value of 11.9%. The highest potential was calculated for a detached house located on a large site, while the weakest was calculated for compact apartment blocks. The study revealed that in order to quantify this potential more accurately, several knowledge gaps must first be addressed. These include impartial growth algorithms for Nordic wood species, missing accumulation factors for soil organic carbon in cold climates and statistical maintenance scenarios for gardens. Copyright © 2016 Elsevier B.V. All rights reserved.

Unmet Support Service Needs and Health-Related Quality of Life among Adolescents and Young Adults with Cancer: The AYA HOPE Study

Directory of Open Access Journals (Sweden)

Ashley Wilder Smith

2013-04-01

Full Text Available Introduction: Cancer for adolescents and young adults (AYA differs from younger and older patients; AYA face medical challenges while navigating social and developmental transitions. Research suggests that these patients are under- or inadequately served by current support services, which may affect health-related quality of life (HRQOL.Methods: We examined unmet service needs and HRQOL in the National Cancer Institute’s Adolescent and Young Adult Health Outcomes and Patient Experience (AYA HOPE study, a population-based cohort (n=484, age 15-39, diagnosed with cancer 6-14 months prior, in 2007-2009. Unmet service needs were psychosocial, physical, spiritual, and financial services where respondents endorsed that they needed, but did not receive, a listed service. Linear regression models tested associations between any or specific unmet service needs and HRQOL, adjusting for demographic, medical and health insurance variables.Results: Over one-third of respondents reported at least one unmet service need. The most common were financial (16%, mental health (15%, and support group (14% services. Adjusted models showed that having any unmet service need was associated with worse overall HRQOL, fatigue, physical, emotional, social, and school/work functioning, and mental health (p’s<0.0001. Specific unmet services were related to particular outcomes (e.g., needing pain management was associated with worse overall HRQOL, physical and social functioning (p’s<0.001. Needing mental health services had the strongest associations with worse HRQOL outcomes; needing physical/occupational therapy was most consistently associated with poorer functioning across domains.Discussion: Unmet service needs in AYAs recently diagnosed with cancer are associated with worse HRQOL. Research should examine developmentally appropriate, relevant practices to improve access to services demonstrated to adversely impact HRQOL, particularly physical therapy and mental

Symptoms and health-related quality of life in patients with advanced cancer

DEFF Research Database (Denmark)

Augustussen, Mikaela; Sjøgren, Per; Timm, Helle

2017-01-01

PURPOSE: The aims were to describe symptoms and health-related quality of life (HRQoL) in Greenlandic patients with advanced cancer and to assess the applicability and internal consistency of the Greenlandic version of the EORTC-QLQ-C30 core version 3.0. METHODS: A Greenlandic version of the EORTC...... functioning. This indicates a potential for improving palliative care service and increasing the focus on symptom management. The Greenlandic version of the EORTC-QLQ-C30 represents an applicable and reliable tool to describe symptoms and health-related quality of life among Greenlandic patients with advanced...... cancer receiving palliative treatment was conducted. Internal consistency was examined by calculating Cronbach's alpha coefficients for five function scales and three symptom scales. RESULTS: Of the 58 patients who participated in the study, 47% had reduced social functioning, 36% had reduced physical...

IEEE Std 101-1987: IEEE guide for the statistical analysis of thermal life test data

International Nuclear Information System (INIS)

Anon.

1992-01-01

This revision of IEEE Std 101-1972 describes statistical analyses for data from thermally accelerated aging tests. It explains the basis and use of statistical calculations for an engineer or scientist. Accelerated test procedures usually call for a number of specimens to be aged at each of several temperatures appreciably above normal operating temperatures. High temperatures are chosen to produce specimen failures (according to specified failure criteria) in typically one week to one year. The test objective is to determine the dependence of median life on temperature from the data, and to estimate, by extrapolation, the median life to be expected at service temperature. This guide presents methods for analyzing such data and for comparing test data on different materials

An End of Service Life Assessment of PMMA Lenses from Veteran Concentrator Photovoltaic Systems

Energy Technology Data Exchange (ETDEWEB)

Miller, David C.; Khonkar, Hussameldin I.; Herrero, Rebecca; Anton, Ignacio; Johnson, David K.; Vinzant, Todd B.; Deutch, Steve; To, Bobby; Sala, Gabriel; Kurtz, Sarah R.

2017-03-21

The optical performance of poly(methyl methacrylate) lenses from veteran concentrator photovoltaic modules was examined after the end of their service life. Lenses from the Martin-Marietta and Intersol module designs were examined from the 'Solar Village' site near Riyadh, Saudi Arabia, as well as the Phoenix Sky Harbor airport, followed by the Arizona Public Service Solar Test and Research (APS-STaR) center in Tempe, Arizona. The various lens specimens were deployed for 20, 27, and 22 years, respectively. Optical characterizations included lens efficiency (Solar Simulator instrument), material transmittance and haze (of coupons cut from veteran lenses, then measured again after their faceted back surface was polished, and then measured again after the incident front surface was polished), and direct transmittance (as a function of detector's acceptance angle, using the Very Low Angular Beam Spread ('VLABS') instrument). Lens efficiency measurements compared the central region to the entire lens, also using hot and cold mirror measurements to diagnose differences in performance. A series of subsequent characterizations was performed because a decrease in performance of greater than 10% was observed for some of the veteran lenses. Surface roughness was examined using atomic force microscopy and scanning electron microscopy. Facet geometry (tip and valley radius) was quantified on cross-sectioned specimens. Molecular weight was compared between the incident and faceted surfaces of the lenses.

A web environment for inspection service

International Nuclear Information System (INIS)

Robles Guemes, N.; Garcia Heras, M.; Cueto-Felgueroso Garcia, C.; Pelaez Gutierrez, J. A.

2013-01-01

The in-service inspection fundamental objective is to maintain the structural integrity of structures, systems and components during the life in the installation service. Nuclear power plants are required to implement a Service inspection program in accordance with the established regulation by the Regulatory body.

A falls prevention programme to improve quality of life, physical function and falls efficacy in older people receiving home help services: study protocol for a randomised controlled trial.

Science.gov (United States)

Bjerk, Maria; Brovold, Therese; Skelton, Dawn A; Bergland, Astrid

2017-08-14

Falls and fall-related injuries in older adults are associated with great burdens, both for the individuals, the health care system and the society. Previous research has shown evidence for the efficiency of exercise as falls prevention. An understudied group are older adults receiving home help services, and the effect of a falls prevention programme on health-related quality of life is unclear. The primary aim of this randomised controlled trial is to examine the effect of a falls prevention programme on quality of life, physical function and falls efficacy in older adults receiving home help services. A secondary aim is to explore the mediating factors between falls prevention and health-related quality of life. The study is a single-blinded randomised controlled trial. Participants are older adults, aged 67 or older, receiving home help services, who are able to walk with or without walking aids, who have experienced at least one fall during the last 12 months and who have a Mini Mental State Examination of 23 or above. The intervention group receives a programme, based on the Otago Exercise Programme, lasting 12 weeks including home visits and motivational telephone calls. The control group receives usual care. The primary outcome is health-related quality of life (SF-36). Secondary outcomes are leg strength, balance, walking speed, walking habits, activities of daily living, nutritional status and falls efficacy. All measurements are performed at baseline, following intervention at 3 months and at 6 months' follow-up. Sample size, based on the primary outcome, is set to 150 participants randomised into the two arms, including an estimated 15-20% drop out. Participants are recruited from six municipalities in Norway. This trial will generate new knowledge on the effects of an exercise falls prevention programme among older fallers receiving home help services. This knowledge will be useful for clinicians, for health managers in the primary health care service

METAL STRUCTURES SURVIVABILITY ASSESSMENT WHEN SIMULATING SERVICE CONDITIONS

Directory of Open Access Journals (Sweden)

O. M. Gibalenko

2016-04-01

Full Text Available Purpose. The research is aimed at improving the quality and reliability of measures of primary and secondary protection of metal structures at manufacturing companies, to prolong the service life of cyclically loaded structures of production facilities taking into account the corrosion level of danger. Methodology. Authors proposed to use the principles of process approach for statement and realization of management problems of operational service life in corrosion environments. The principles of ensuring reliability on the level of corrosion danger include justification of stages sequence for survivability assessment of a structural metalwork based on the strategy of DMAIC (define, measure, analyze, improve, control: definitions, measurements, analysis, improvement and monitoring of measures of primary and secondary corrosion protection. Findings. Providing control measures from corrosion according to the criterion of corrosion danger allows providing requirements of reliability of structural metalwork based on calculated provisions of the limiting conditions method and solving the problems of management in technological safety during the expected service life of structural objects. Originality. The developed strategy of maintenance of the industrial facilities on an actual state includes the process approach to resource management by creation of system for the account and the functional controlling, risk analysis and regulation of technological safety in production facilities of the enterprises. Realization of the principles of process approach to management of technological safety at the object level is directed to perfecting of tools and methods of anticorrosive protection, extension of a resource taking into account indexes of survivability (, and justification of program measures to ensure the reliability of enterprises(PER. Practical value. On the basis of process approach to quality and reliability management, generalizations of the

Fatigue life prediction of autofrettage tubes using actual material behaviour

International Nuclear Information System (INIS)

Jahed, Hamid; Farshi, Behrooz; Hosseini, Mohammad

2006-01-01

There is a profound Bauschinger effect in the behaviour of high-strength steels used in autofrettaged tubes. This has led to development of methods capable of considering experimentally obtained (actual) material behaviour in residual stress calculations. The extension of these methods to life calculations is presented here. To estimate the life of autofrettaged tubes with a longitudinal surface crack emanating from the bore more accurately, instead of using idealized models, the experimental loading-unloading stress-strain behaviour is employed. The resulting stresses are then used to calculate stress intensity factors by the weight function method as input to fatigue life determination. Fatigue lives obtained using the actual material behaviour are then compared with the results of frequently used ideal models including those considering Bauschinger effect factors and strain hardening in unloading. Using standard fatigue crack growth relationships, life of the vessel is then calculated based on recommended initial and final crack length. It is shown that the life gain due to autofrettage above 70% overstrain is considerable

Comparing the Life Cycle Energy Consumption, Global ...

Science.gov (United States)

Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG) emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energyand carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage) centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability

Bespoke program design for school-aged therapy disability service delivery.

Science.gov (United States)

Weatherill, Pamela; Bahn, Susanne; Cooper, Trudi

2012-01-01

This article uses the evaluation of a school-aged therapy service for children with disabilities in Western Australia to investigate models of service delivery. The current literature on family-centered practice, multidisciplinary and transdisciplinary approaches, and 4 models of service are reviewed. The models include the life needs model, the relational goal-orientated model of optimal service delivery to children and families, the quality of life model, and the collaborative model of service delivery. Analysis of the data is presented together with a bespoke model of service delivery for children with disabilities, arguing that local contexts benefit from custom-made service design.

Calculation of Selected Emissions from Transport Services in Road Public Transport

Directory of Open Access Journals (Sweden)

Konečný Vladimír

2017-01-01

Full Text Available The article deals with road public transport and its impact on the environment. According to the methodology given in EN 16258, CO2 emission value has been calculated. The input data for the calculation and the results are shown in the tables. The declaration is created according to STN CEN / TR 14310, which contains recommendations for compiling environmental reports. Finally, the comparison of the environmental impact of a bus and a passenger car, when converted to one passenger, bus has a lower CO2 emission than a passenger car in that section.

Calculation of forces on reactor containment fan cooler piping

International Nuclear Information System (INIS)

Miller, J.S.; Ramsden, K.

2004-01-01

The purpose of this paper is to present the results of the Reactor Containment Fan Cooler (RCFC) system piping load calculations. These calculations are based on piping loads calculated using the EPRI methodology and RELAP5 to simulate the hydraulic behavior of the system. The RELAP5 generated loads were compared to loads calculated using the EPRI GL-96-06 methodology. This evaluation was based on a pressurized water reactor's RCFC coils thermal hydraulic behavior during a Loss of Offsite Power (LOOP) and a loss of coolant accident (LOCA). The RCFC consist of two banks of service water and chill water coils. There are 5 SX and 5 chill water coils per bank. Therefore, there are 4 RCFC units in the containment with 2 banks of coils per RCFC. Two Service water pumps provide coolant for the 4 RCFC units (8 banks total, 2 banks per RCFC unit and 2 RCFC units per pump). Following a LOOP/LOCA condition, the RCFC fans would coast down and upon being re-energized, would shift to low-speed operation. The fan coast down is anticipated to occur very rapidly due to the closure of the exhaust damper as a result of LOCA pressurization effects. The service water flow would also coast down and be restarted in approximately 43 seconds after the initiation of the event. The service water would drain from the RCFC coils during the pump shutdown and once the pumps restart, water is quickly forced into the RCFC coils causing hydraulic loading on the piping. Because of this scenario and the potential for over stressing the piping, an evaluation was performed by the utility using RELAP5 to assess the piping loads. Subsequent to the hydraulic loads being analyzed using RELAP5, EPRI through GL-96-06 provided another methodology to assess loads on the RCFC piping system. This paper presents the results of using the EPRI methodology and RELAP5 to perform thermal hydraulic load calculations. It is shown that both EPRI methodology and RELAP5 calculations can be used to generate hydraulic loads

Years of life lost through Down's syndrome.

Science.gov (United States)

Jones, M B

1979-10-01

A congenital genetic condition does not act either as a cause of death or at the time of death only. Hence, years of life lost through such a conditon cannot be calculated in the same way as for a conventional cause of death. The main difference is that a cause of death acting at age x cuts off as many years of life as the dead person might otherwise have expected to live (life expectancy at age x), whereas a congenital genetic condition exposes an affected person to a different schedule of life-threatening risks from birth onwards. In the latter case, years of life lost is calculated as the difference in life expectancy at birth for affected and non-affected persons. This reasoning is worked out in algebraic form and then applied to Down's syndrome. The data base is provided by two large and recent studies, one in Massachusetts and the other in Denmark, of mortality rates among all cases of Down's syndrome, whether in an institution or not, born during a given period of years or living at a given point in time in a fixed geographical area. So calculated, years of life lost through Down's syndrome relative to the United States general population in 1970 was 53.6 years per 1000 livebirths. Prenatal mortality is also discussed.

Challenges in Designing and Scaling-up Community Services

DEFF Research Database (Denmark)

Morelli, Nicola

2014-01-01

of services. Both projects are highly related to a real life context for senior people (Life 2.0) and people with brain injury and their assistants (MyN). Several analogies could be found, between the existing generation of social networking platforms and the services proposed in these projects, however...... 2.0. This paper analyses the lesson learned from the work undertaken so far and proposes criteria and hypotheses for the diffusion of this kind of services....

Determinants of Customer Satisfaction and Loyalty in Vietnamese Life-Insurance Setting

Directory of Open Access Journals (Sweden)

Ha Thu Nguyen

2018-04-01

Full Text Available Sustainable services are often regarded as sustainable strategies and operations producing goods and services that satisfy customer needs and significantly improve social and environmental performance. To be sustainable, service providers must satisfy consumers’ needs or otherwise they will become redundant and economically irrelevant. This paper presents the results of an empirical study on the determinants of customer satisfaction and loyalty in life-insurance services in Vietnam based on a database collected through a questionnaire survey of 1476 customers during 2017. A path analysis technique is applied to test the proposed framework on the direct and indirect relationship between variables. The results of statistical analysis indicate that customer satisfaction in life-insurance services is significantly explained by such factors as corporate image, service quality and perceived value. Our findings suggest that a life-insurance service provider should focus on enhancing service quality and corporate image in order to obtain customer satisfaction that leads to customer loyalty.

Predicting current serviceability and residual service life of plywood roof sheathing using kinetics-based models

Science.gov (United States)

J.E. Winandy; P.K. Lebow; J.F. Murphy

2002-01-01

Research programs throughout North America are increasingly focusing on understanding and defining the salient issues of wood durability and maintaining and extending the serviceability of existing wood structures. This report presents the findings and implications of a 10-year research program, carried out at the USDA Forest Service, Forest Products Laboratory, to...

‘Why does it happen like this?’ Consulting with users and providers prior to an evaluation of services for children with life limiting conditions and their families

Science.gov (United States)

Brown, Erica; Coad, Jane; Staniszewska, Sophie; Hacking, Suzanne; Chesworth, Brigit; Chambers, Lizzie

2015-01-01

Children with life limiting conditions and their families have complex needs. Evaluations must consider their views and perspectives to ensure care is relevant, appropriate and acceptable. We consulted with children, young people, their parents and local professionals to gain a more informed picture of issues affecting them prior to preparing a bid to evaluate services in the area. Multiple methods included focus groups, face-to-face and telephone interviews and participatory activities. Recordings and products from activities were analysed for content to identify areas of relevance and concern. An overarching theme from parents was ‘Why does it happen like this?’ Services did not seem designed to meet their needs. Whilst children and young people expressed ideas related to quality of environment, services and social life, professionals focused on ways of meeting the families’ needs. The theme that linked families’ concerns with those of professionals was ‘assessing individual needs’. Two questions to be addressed by the evaluation are (1) to what extent are services designed to meet the needs of children and families and (2) to what extent are children, young people and their families consulted about what they need? Consultations with families and service providers encouraged us to continue their involvement as partners in the evaluation. PMID:24270996

Germany: the government has approved of the extension of the service life of nuclear reactors

International Nuclear Information System (INIS)

Anon.

2010-01-01

The German coalition government has decided on 28 september 2009 to expend the service life of the 17 operating nuclear reactors through the approval of the plan 'Energy 2050'. The average extension will be of 12 years. This decision will postpone the shutdown of the last reactor till 2040. The reciprocal arrangement implies that the nuclear plant operators (EON, RWE, Wattenfall and EnBW) will have to pay an annual tax of 2.3*10 9 euros till 2016. The operators will also have to finance a capital for the development of renewable energies: 200*10 6 euros in 2011 and in 2012 then 300*10 6 euros per year between 2013 and 2016 and eventually to pay a tax of 9 euros per MW of nuclear power produced. (A.C.)

Temperature and void reactivity coefficient calculations for the high flux isotope reactor safety analysis report

International Nuclear Information System (INIS)

Engle, W.W. Jr.; Williams, L.R.

1994-07-01

This report provides documentation of a series of calculations performed in 1991 in order to provide input for the High Flux Isotope Reactor Safety Analysis Report. In particular, temperature and void reactivity coefficients were calculated for beginning-of-life, end-of-life, and xenon equilibrium (29 h) conditions. Much of the data used to prepare the computer models for these calculations was derived from the original HFIR nuclear design study

Measuring and calculational complex on the base of multi-detector system and the kinetics parametrs by the method of neutron pulsed source

International Nuclear Information System (INIS)

Veselova, G.P.; Grachev, A.V.; Ivanova, N.K.

1985-01-01

Description of hardware of a measuring and calculation complex (MCC) designed for measuring neutron-physical characteristics of a reactor by the neutron pulsed method simultaneously from 8 detectors and the MERA-60 computer software used by MCC for measuring dependences of neutron generation and life time on the reactivity change is presented. The complex serviceability is tested at one of the PEI physical stands. MCC operation during a year has demonstrated its high reliability and a possibility of being used both for pulsed and other methods for investigating physical stands without introduction of supplementary equipment

How does substrate roughness affect the service life of a superhydrophobic coating?

Science.gov (United States)

Zhang, Xin; Mo, Jiliang; Si, Yifan; Guo, Zhiguang

2018-05-01

Although the development of superhydrophobic coatings is rapidly maturing, issues related to their low mechanical durability persist. In this context, the effect of substrate roughness on the service life of superhydrophobic coatings was studied. In this study, superhydrophobic coatings were fabricated on sandpapers of different roughness and reciprocating wear tests were conducted. The wear-resistance number of the superhydrophobic coating, defined as the maximum number of friction cycles after which the superhydrophobic surface started to lose its superhydrophobicity, increased from 50 to 24,000 with an increase in the substrate roughness from 2000 CW to 240 CW (CW is defined as the number of particles arranged in an inch), while it decreased from 24,000 to 17,000 with a further increase in the substrate roughness from 240 CW to 60 CW. Observations of the surface structure and wear analyses indicated that the superhydrophobic material infiltrated the spaces between the sand grains, and the rough peaks could consequently protect the superhydrophobic material during the wear tests. However, this protection weakens when the substrate roughness increases or decreases beyond certain values. Furthermore, these phenomena and results were also verified by applying the superhydrophobic coatings to different types of common substrates.

Enhanced reproducibility of SADI web service workflows with Galaxy and Docker.

Science.gov (United States)

Aranguren, Mikel Egaña; Wilkinson, Mark D

2015-01-01

Semantic Web technologies have been widely applied in the life sciences, for example by data providers such as OpenLifeData and through web services frameworks such as SADI. The recently reported OpenLifeData2SADI project offers access to the vast OpenLifeData data store through SADI services. This article describes how to merge data retrieved from OpenLifeData2SADI with other SADI services using the Galaxy bioinformatics analysis platform, thus making this semantic data more amenable to complex analyses. This is demonstrated using a working example, which is made distributable and reproducible through a Docker image that includes SADI tools, along with the data and workflows that constitute the demonstration. The combination of Galaxy and Docker offers a solution for faithfully reproducing and sharing complex data retrieval and analysis workflows based on the SADI Semantic web service design patterns.

Life Satisfaction in Persons with Intellectual Disabilities

Science.gov (United States)

Lucas-Carrasco, Ramona; Salvador-Carulla, Luis

2012-01-01

We appraised life satisfaction using the Satisfaction with Life Scale (SWLS), and analysed its psychometric properties in persons with intellectual disability (ID). Ninety-nine persons with ID from four services in Spain participated. A battery of subjective assessments was used, including the SWLS, a Quality of Life measure (WHOQOL-BREF), and…

The effect of service satisfaction and spiritual well-being on the quality of life of patients with schizophrenia.

Science.gov (United States)

Lanfredi, Mariangela; Candini, Valentina; Buizza, Chiara; Ferrari, Clarissa; Boero, Maria E; Giobbio, Gian M; Goldschmidt, Nicoletta; Greppo, Stefania; Iozzino, Laura; Maggi, Paolo; Melegari, Anna; Pasqualetti, Patrizio; Rossi, Giuseppe; de Girolamo, Giovanni

2014-05-15

Quality of life (QOL) has been considered an important outcome measure in psychiatric research and determinants of QOL have been widely investigated. We aimed at detecting predictors of QOL at baseline and at testing the longitudinal interrelations of the baseline predictors with QOL scores at a 1-year follow-up in a sample of patients living in Residential Facilities (RFs). Logistic regression models were adopted to evaluate the association between WHOQoL-Bref scores and potential determinants of QOL. In addition, all variables significantly associated with QOL domains in the final logistic regression model were included by using the Structural Equation Modeling (SEM). We included 139 patients with a diagnosis of schizophrenia spectrum. In the final logistic regression model level of activity, social support, age, service satisfaction, spiritual well-being and symptoms' severity were identified as predictors of QOL scores at baseline. Longitudinal analyses carried out by SEM showed that 40% of QOL follow-up variability was explained by QOL at baseline, and significant indirect effects toward QOL at follow-up were found for satisfaction with services and for social support. Rehabilitation plans for people with schizophrenia living in RFs should also consider mediators of change in subjective QOL such as satisfaction with mental health services. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

How much is information worth? Calculating the economic value of a library’s services

Directory of Open Access Journals (Sweden)

Maira Nani França

2017-01-01

Full Text Available The benefits of the services offered by an informational unit have been characterized by the desired outcome, such as the effective response from a user. These values are made up of enough concrete data if expressed in monetary terms, that is, finding out which is the cost to provide such services. Assigning value to each of the information services offered by university libraries and measuring it are one of the most challenging and less applied managerial tasks in information environments. This paper aims to assign economic value to the services provided by a Brazilian university library, developing a tool that will assist managers in decision -making and evaluation of informational units in order to guarantee the quality of services provided.

Quality of Life for Individuals with Hearing Impairment Who Have Not Consulted for Services and Their Significant Others: Same- and Different-Sex Couples

Science.gov (United States)

Kelly, Rebecca J.; Atcherson, Samuel R.

2011-01-01

The purpose of this exploratory study was to assess perceptions of quality of life for individuals with hearing impairment who have not consulted for services and their significant others who are in same-sex relationships vs. those who are in different-sex relationships. Data were collected on a total of 20 older couples: 10 in same-sex…

The EMBRACE web service collection.

NARCIS (Netherlands)

Pettifer, S.; Ison, J.; Kalas, M.; Thorne, D.; McDermott, P.; Jonassen, I.; Liaquat, A.; Fernandez, J.M.; Rodriguez, J.M.; Pisano, D.G.; Blanchet, C; Uludag, M.; Rice, P.; Bartaseviciute, E.; Rapacki, K.; Hekkelman, M.L.; Sand, O.; Stockinger, H.; Clegg, A.B.; Bongcam-Rudloff, E.; Salzemann, J.; Breton, V.; Attwood, T.K.; Cameron, G.; Vriend, G.

2010-01-01

The EMBRACE (European Model for Bioinformatics Research and Community Education) web service collection is the culmination of a 5-year project that set out to investigate issues involved in developing and deploying web services for use in the life sciences. The project concluded that in order for

Considerations related to plant life management for Cernavoda-1

International Nuclear Information System (INIS)

Cojan, Mihail

2002-01-01

Cernavoda-1 NPP, the first CANDU 6 Unit in Eastern Europe, is one of the original five CANDU 6 plants and the first CANDU 6 producing over 700 MWe. CANDU Pressurized Heavy Water Reactors (PHWR) continues to play a significant role in electricity supply both in Canada and some offshore countries (Korea, Argentina, Romania). The commercial versions of CANDU reactors were put into service more than 30 years ago. While the first series of CANDU 6 plants (which entered service in the early 1980's) have now reached the middle portion of their 30 years design life, the Cernavoda-1 was put into service on 2 December 1996. However, the Cernavoda-1 Plant Life Management should be an increasingly important program to Utility ('CNE-Prod') in order to protect the investment and the continued success of plant operation. Over the past three years, INR (Institute for Nuclear Research - Romania) has been working with AECL-Canada on R and D Programs to support a comprehensive and integrated Cernavoda-1 Plant Life Management (PLiM) program that will see the Cernavoda-1 NPP successfully and reliably through to design life and beyond. The PLiM program has a focus on critical systems, structures, and components (CSSCs) and will be applied in three phases: Phase 1 - Planning (assessment and recommendations); Phase 2 - Life attainment implementation, and; Phase 3 - Plant Life Extension (PLEx), also known as plant extended operation. The key activities during each phase are shown. The schedule of each Phase are shown using the in service date of 1983 as the basis. This schedule applies to three original CANDU 6 plants with an in-service date of 1983: Point Lepreau, Gentilly-2, Wolsong-1 and shortly thereafter (1984) the 4th original CANDU 6 Embalse NPP was declared in service. Cernavoda-1 is the 5th original CANDU 6 plant and was put into service on 2 December 1996 (on site activities were started in 1980). The paper will describe the elements of an integrated program, the multiphase

Clinical Utility and Psychometric Properties of the Traumatic Brain Injury Quality of Life Scale (TBI-QOL) in US Military Service Members.

Science.gov (United States)

Lange, Rael T; Brickell, Tracey A; Bailie, Jason M; Tulsky, David S; French, Louis M

2016-01-01

To examine the clinical utility and psychometric properties of the Traumatic Brain Injury Quality of Life (TBI-QOL) scale in a US military population. One hundred fifty-two US military service members (age: M = 34.3, SD = 9.4; 89.5% men) prospectively enrolled from the Walter Reed National Military Medical Center and other nationwide community outreach initiatives. Participants included 99 service members who had sustained a mild traumatic brain injury (TBI) and 53 injured or noninjured controls without TBI (n = 29 and n = 24, respectively). Participants completed the TBI-QOL scale and 5 other behavioral measures, on average, 33.8 months postinjury (SD = 37.9). Fourteen TBI-QOL subscales; Neurobehavioral Symptom Inventory; Posttraumatic Stress Disorder Checklist-Civilian version; Alcohol Use Disorders Identification Test; Combat Exposure Scale. The internal consistency reliability of the TBI-QOL scales ranged from α = .91 to α = .98. The convergent and discriminant validity of the 14 TBI-QOL subscales was high. The mild TBI group had significantly worse scores on 10 of the 14 TBI-QOL subscales than the control group (range, P quality of life in a mild TBI military sample. Additional research is recommended to further evaluate the clinical utility of the TBI-QOL scale in both military and civilian settings.

Determining the residual lifetime for the main RBMK components in frame of life extension of power units

International Nuclear Information System (INIS)

Baldin, V.D.; Petrov, A.A.; Potapov, A.A.

2005-01-01

At present time 11 power units of NPPs with RBMK reactors produce annually 140 billion kWh of electricity, which is about half of all electricity generated at Russian NPPs. Commissioned during the period of 1973 to 1990, they have the specified service life of 30 years. The power units have been regularly upgraded during operation to raise their safety and reliability. As the result now they meet modem requirements in terms of safety and their lifetime can considerably exceed their specified service life. The task of the plant life extension becomes more urgent. The main nonreplaceable RBMK reactor components that determine the reactor life, are graphite stack and metal support structures. The aging of these structures is monitored and the structures residual lifetime is predicted in accordance with procedures approved by regulatory authorities. The lead unit among all RBMK power units is Leningrad NPP Unit 1 commissioned in 1973. A complex of activities was performed for this power unit in 2002-2003 to prove the feasibility of its life extension. In terms of defining the residual lifetime of the reactor components, the activities were performed in three major areas: - examination of the state of the reactor structures; - materials studies of irradiated metal and graphite specimens in hot chambers; - performing the calculation and prediction evaluations. The results of examining the metal structures and studying specimens have shown that: 1)The metal and the welds do not have visible defects. The state of protective coatings is largely satisfactory. 2)The ultimate strength and hardness of steel have grown. 3)The brittle fracture transition temperature shift is at the allowable level. 4)The leak-tightness of the metal structures has not been violated. The results of the graphite stack examination have shown that the graphite is at the hardening stage. No tendency for deterioration of mechanical properties has been recorded. According to the results of measuring the

A future for nuclear sites beyond their service life. Nuclear site value development

International Nuclear Information System (INIS)

2008-01-01

As the nuclear industry moves into a new development phase, many facilities built in the fifties and sixties are reaching the end of their service life. Dismantling them and rehabilitating the sites on which they stand is a major industrial challenge which will give rise to a number of new projects. AREVA has more than 20 years' experience in these highly technical fields. As more and more sites reach the end of their service life, AREVA considers nuclear site value development as a fully-fledged industrial activity. The group's competencies in this field have been grouped together to form a dedicated entity: the Nuclear Site Value Development Business Unit, created in 2008. Several billion euros are invested in site value development projects which are far-reaching and complex, and often last for several decades. Long before work actually begins, lengthy studies and preparations are required to schedule operations, select the techniques to be used and optimize costs and deadlines. The Nuclear Site Value Development BU is currently working on four major projects involving its own facilities and those of the CEA: - La Hague: dismantling of the first generation of used fuel recycling facilities. Between 1966 and 1998, almost 5,000 tons of used fuel from graphite-moderated gas-cooled reactors, 4,500 tons of light water reactor fuel, as well as fuel from fast reactors and research reactors, were treated at UP2 400, the very first industrial recycling plant on the La Hague site. - Marcoule: first-time dismantling of a recycling plant. 1,000 rooms to be cleaned up, 30,000 tons of waste to be treated, 30 years of work. - Cadarache: first-time dismantling of a Mox fuel fabrication plant. The Cadarache plant was commissioned in 1962 to fabricate fuel for fast reactors; this was followed by MOX fuel for light water reactors, an activity which continued until the plant was shut down in 2003. - Annecy and Veurey: giving a new lease of life to former industrial sites in built

39 CFR 3010.23 - Calculation of percentage change in rates.

Science.gov (United States)

2010-07-01

... DOMINANT PRODUCTS Rules for Applying the Price Cap § 3010.23 Calculation of percentage change in rates. (a... Postal Service billing determinants. The Postal Service shall make reasonable adjustments to the billing determinants to account for the effects of classification changes such as the introduction, deletion, or...

Fuzzy Life-Extending Control of Anti-Lock Braking System

Directory of Open Access Journals (Sweden)

Ahmed M. El-Garhy

2013-12-01

Full Text Available The repeated operation of the Anti-Lock Braking System (ABS causes accumulation of structural damages in its different subsystems leading to reduction in their functional life time. This paper proposes a Fuzzy Logic based Life-Extending Control (FLEC system for increasing the service life of the ABS. FLEC achieves significant improvement in service life by the trade-off between satisfactory dynamic performance and safe operation. The proposed FLEC incorporates structural damage model of the ABS. The model utilizes the dynamic behavior of the ABS and predicts the wear rates of the brake pads/disc. Based on the predicted wear rates, the proposed fuzzy logic controller modifies its control strategy on-line to keep safe operation leading to increase in service time of the ABS. FLEC is fine tuned via genetic algorithm and its effectiveness is verified through simulations of emergency stops of a passenger vehicle model.

Evaluation of local corrosion life by statistical method

International Nuclear Information System (INIS)

Kato, Shunji; Kurosawa, Tatsuo; Takaku, Hiroshi; Kusanagi, Hideo; Hirano, Hideo; Kimura, Hideo; Hide, Koichiro; Kawasaki, Masayuki

1987-01-01

In this paper, for the purpose of achievement of life extension of light water reactor, we examined the evaluation of local corrosion by satistical method and its application of nuclear power plant components. There are many evaluation examples of maximum cracking depth of local corrosion by dowbly exponential distribution. This evaluation method has been established. But, it has not been established that we evaluate service lifes of construction materials by satistical method. In order to establish of service life evaluation by satistical method, we must strive to collect local corrosion dates and its analytical researchs. (author)

CANDU plant life management - An integrated approach

International Nuclear Information System (INIS)

Charlebois, P.; Hart, R.S.; Hopkins, J.R.

1998-01-01

Commercial versions of CANDU reactors were put into service starting more than 25 years ago. The first unit of Ontario Hydro's Pickering A station was put into service in 1971, and Bruce A in 1977. Most CANDU reactors, however, are only now approaching their mid-life of 15 to 20 years of operation. In particular, the first series of CANDU 6 plants which entered service in the early 1980's were designed for a 30 year life and are now approaching mid life. The current CANDU 6 design is based on a 40 year life as a result of advancement in design and materials through research and development. In order to assure safe and economic operation of these reactors, a comprehensive CANDU Plant Life Management (PLIM) program is being developed from the knowledge gained during the operation of Ontario Hydro's Pickering, Bruce, and Darlington stations, worldwide information from CANDU 6 stations, CANDU research and development programs, and other national and international sources. This integration began its first phase in 1994, with the identification of most of the critical systems structures and components in these stations, and a preliminary assessment of degradation and mechanisms that could affect their fitness for service for their planned life. Most of these preliminary assessments are now complete, together with the production of the first iteration of Life Management Plans for several of the systems and components. The Generic CANDU 6 PLIM program is now reaching its maturity, with formal processes to systematically identify and evaluate the major CSSCs in the station, and a plan to ensure that the plant surveillance, operation, and maintenance programs monitor and control component degradation well within the original design specifications essential for the plant life attainment. A Technology Watch program is being established to ensure that degradation mechanisms which could impact on plant life are promptly investigated and mitigating programs established. The

Analysing scientific workflows: Why workflows not only connect web services

NARCIS (Netherlands)

Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, L.J.

2009-01-01

Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

Analysing scientific workflows: why workflows not only connect web services

NARCIS (Netherlands)

Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, LJ.

2009-01-01

Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

The effect of crack width on the service life of reinforced concrete structures

Science.gov (United States)

Van Hung, Nguyen; Viet Hung, Vu; Viet, Tran Bao

2018-04-01

Reinforced concrete has become a widely used construction material around the world. Nowadays, the assessment of deterioration and life expectancy of reinforced concrete structure is very important and necessary as concrete is a complex material with brittle failure. Under the effect of load and over time, cracks occur in the structure, significantly reducing its performance and durability. Therefore, a number of models for predicting the penetration of chloride ions into the concrete were proposed to assess the durability of the structure. In the study performed by T B Viet (2016) [1], the author proposed a new theoretical model, especially considering the effects of macro and micro cracking on the diffusion coefficient of chloride ion in the cracked concrete. The following experimental results, in term of electrical indication of concrete’s ability to resist chloride ion penetration, are used to calculate the lifespan of a reinforced concrete structure according to Dura Crete approach [8] with different crack widths to evaluate the accuracy and reliability of the above model in the range of concrete compressive strength of 30-70MPa.

Current HIV/AIDS end-of-life care in sub-Saharan Africa: a survey of models, services, challenges and priorities

Directory of Open Access Journals (Sweden)

O'Neill Joseph F

2003-10-01

Full Text Available Abstract Background In response to increased global public health funding initiatives to HIV/AIDS care in Africa, this study aimed to describe practice models, strategies and challenges to delivering end-of-life care in sub-Saharan Africa. Methods A survey end-of-life care programs was conducted, addressing the domains of service aims and configuration, barriers to pain control, governmental endorsement and strategies, funding, monitoring and evaluation, and research. Both closed and qualitative responses were sought. Results Despite great structural challenges, data from 48 programs in 14 countries with a mean annual funding of US $374,884 demonstrated integrated care delivery across diverse settings. Care was commonly integrated with all advanced disease care (67% and disease stages (65% offering care from diagnosis. The majority (98% provided home-based care for a mean of 301 patients. Ninety-four percent reported challenges in pain control (including availability, lack of trained providers, stigma and legal restrictions, and 77% addressed the effects of poverty on disease progression and management. Although 85% of programs reported Government endorsement, end-of-life and palliative care National strategies were largely absent. Conclusions The interdependent tasks of expanding pain control, balancing quality and coverage of care, providing technical assistance in monitoring and evaluation, collaborating between donor agencies and governments, and educating policy makers and program directors of end-of-life care are all necessary if resources are to reach their goals.

Semantic-JSON: a lightweight web service interface for Semantic Web contents integrating multiple life science databases.

Science.gov (United States)

Kobayashi, Norio; Ishii, Manabu; Takahashi, Satoshi; Mochizuki, Yoshiki; Matsushima, Akihiro; Toyoda, Tetsuro

2011-07-01

Global cloud frameworks for bioinformatics research databases become huge and heterogeneous; solutions face various diametric challenges comprising cross-integration, retrieval, security and openness. To address this, as of March 2011 organizations including RIKEN published 192 mammalian, plant and protein life sciences databases having 8.2 million data records, integrated as Linked Open or Private Data (LOD/LPD) using SciNetS.org, the Scientists' Networking System. The huge quantity of linked data this database integration framework covers is based on the Semantic Web, where researchers collaborate by managing metadata across public and private databases in a secured data space. This outstripped the data query capacity of existing interface tools like SPARQL. Actual research also requires specialized tools for data analysis using raw original data. To solve these challenges, in December 2009 we developed the lightweight Semantic-JSON interface to access each fragment of linked and raw life sciences data securely under the control of programming languages popularly used by bioinformaticians such as Perl and Ruby. Researchers successfully used the interface across 28 million semantic relationships for biological applications including genome design, sequence processing, inference over phenotype databases, full-text search indexing and human-readable contents like ontology and LOD tree viewers. Semantic-JSON services of SciNetS.org are provided at http://semanticjson.org.

Stressful life events preceding the onset of depression in Asian patients with major depressive disorder.

Science.gov (United States)

Park, Subin; Hatim, Ahmad; Si, Tian-Mei; Jeon, Hong Jin; Srisurapanont, Manit; Bautista, Dianne; Liu, Shen-ing; Chua, Hong Choon; Hong, Jin Pyo

2015-12-01

Previous studies have identified the significant role of stressful life events in the onset of depressive episodes. However, there is a paucity of cross-national studies on stressful life events that precede depression. We aimed to compare types of stressful life events associated with the onset of depressive episodes in patients with major depressive disorder (MDD) in five Asian countries. A total of 507 outpatients with MDD were recruited in China (n = 114), South Korea (n = 101), Malaysia (n = 90), Thailand (n = 103) and Taiwan (n = 99). All patients were assessed with the Mini-International Neuropsychiatric Interview and the List of Threatening Experiences. The prevalence of each type of stressful life events was calculated and compared between each country. The type of stressful life event that preceded the onset of a depressive episode differed between patients in China and Taiwan and those in South Korea, Malaysia and Thailand. Patients in China and Taiwan were less likely to report interpersonal relationship problems and occupational/financial problems than patients in South Korea, Malaysia and Thailand. Understanding the nature and basis of culturally determined susceptibilities to specific stressful life events is critical for establishing a policy of depression prevention and providing effective counseling services for depressed patients. © The Author(s) 2015.

Assessing the impact of care farms on quality of life and offending: a pilot study among probation service users in England.

Science.gov (United States)

Elsey, Helen; Farragher, Tracey; Tubeuf, Sandy; Bragg, Rachel; Elings, Marjolein; Brennan, Cathy; Gold, Rochelle; Shickle, Darren; Wickramasekera, Nyantara; Richardson, Zoe; Cade, Janet; Murray, Jenni

2018-03-17

To assess the feasibility of conducting a cost-effectiveness study of using care farms (CFs) to improve quality of life and reduce reoffending among offenders undertaking community orders (COs). To pilot questionnaires to assess quality of life, connection to nature, lifestyle behaviours, health and social-care use. To assess recruitment and retention at 6 months and feasibility of data linkage to Police National Computer (PNC) reconvictions data and data held by probation services. Pilot study using questionnaires to assess quality of life, individually linked to police and probation data. The pilot study was conducted in three probation service regions in England. Each site included a CF and at least one comparator CO project. CFs are working farms used with a range of clients, including offenders, for therapeutic purposes. The three CFs included one aquaponics and horticulture social enterprise, a religious charity focusing on horticulture and a family-run cattle farm. Comparator projects included sorting secondhand clothes and activities to address alcohol misuse and anger management. We recruited 134 adults (over 18) serving COs in England, 29% female. 52% of participants completed follow-up questionnaires. Privatisation of UK probation trusts in 2014 negatively impacted on recruitment and retention. Linkage to PNC data was a more successful means of follow-up, with 90% consenting to access their probation and PNC data. Collection of health and social-care costs and quality-adjusted life year derivation were feasible. Propensity score adjustment provided a viable comparison method despite differences between comparators. We found worse health and higher reoffending risk among CF participants due to allocation of challenging offenders to CFs, making risk of reoffending a confounder. Recruitment would be feasible in a more stable probation environment. Follow-up was challenging; however, assessing reconvictions from PNC data is feasible and a potential primary

ICT Services for Life Improvement for the Elderly.

Science.gov (United States)

Sánchez-Rico, Alejandro; Garel, Pascal; Notarangelo, Isabella; Quintana, Marcos; Hernández, Gustavo; Asteriadis, Stylianos; Popa, Mirela; Vretos, Nicholas; Solachidis, Vassilis; Burgos, Marta; Girault, Ariane

2017-01-01

Integrated care ICT Platform to support patients, care-givers and health/social professionals in the care of dementia and Parkinson's disease with training, empowerment, sensor-based data analysis and cooperation services based on user-friendly interfaces.

A service life extension (SLEP) approach to operating aging aircraft beyond their original design lives

Science.gov (United States)

Pentz, Alan Carter

With today's uncertain funding climate (including sequestration and continuing budget resolutions), decision makers face severe budgetary challenges to maintain dominance through all aspects of the Department of Defense (DoD). To meet war-fighting capabilities, the DoD continues to extend aircraft programs beyond their design service lives by up to ten years, and occasionally much more. The budget requires a new approach to traditional extension strategies (i.e., reuse, reset, and reclamation) for structural hardware. While extending service life without careful controls can present a safety concern, future operations planning does not consider how much risk is present when operating within sound structural principles. Traditional structural hardware extension methods drive increased costs. Decision makers often overlook the inherent damage tolerance and fatigue capability of structural components and rely on simple time- and flight-based cycle accumulation when determining aircraft retirement lives. This study demonstrates that decision makers should consider risk in addition to the current extension strategies. Through an evaluation of eight military aircraft programs and the application and simulation of F-18 turbine engine usage data, this dissertation shows that insight into actual aircraft mission data, consideration of fatigue capability, and service extension length are key factors to consider. Aircraft structural components, as well as many critical safety components and system designs, have a predefined level of conservatism and inherent damage tolerance. The methods applied in this study would apply to extensions of other critical structures such as bridges. Understanding how much damage tolerance is built into the design compared to the original design usage requirements presents the opportunity to manage systems based on risk. The study presents the sensitivity of these factors and recommends avenues for further research.

26 CFR 1.409A-4 - Calculation of income inclusion. [Reserved

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Calculation of income inclusion. [Reserved] 1.409A-4 Section 1.409A-4 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... Calculation of income inclusion. [Reserved] ...

Methodology for the Life Cycle Assessment of a Car-sharing Service

OpenAIRE

Guyon, Olivier

2017-01-01

Nowadays, circular economy is becoming more relevant in society. In the context of the automotive industry, we no longer simply work on emissions emitted during the vehicle use phase but rather on the environmental impacts induced during all phases of the vehicle's life cycle (manufacturing, logistics, use, maintenance and end of life). For this purpose, many automakers, including the Group PSA, use life cycle assessment (LCA) to determine these environmental impacts. Also, the economy of sha...

Cloud-based Collaborative Business Services Provision

NARCIS (Netherlands)

Camarinha-Matos, L.M.; Afsarmanesh, H.; Oliveira, A.I.; Ferrada, F.; Hammoudi, S.; Cordeiro, J.; Maciaszek, L.A.; Filipe, J.

2014-01-01

The notion of service-enhanced product, representing the association of services to manufactured products, offers an important mechanism for value creation and product differentiation. This is particularly relevant in the case of complex, highly customized and long-life products. Provision of

The effect of a home delivery meal service of energy- and protein-rich meals on quality of life in malnourished outpatients suffering from lung cancer

DEFF Research Database (Denmark)

Leedo, Eva; Gade, Josephine; Granov, Sabrina

2017-01-01

Undernutrition is prevalent in cancer patients and associated with increased incidence of complications and mortality. We investigated the effects of a home delivery meal service, providing a selection of energy-dense, protein-rich meals, on quality of life (QoL) in malnourished lung cancer....... Intervention exerted a significant positive effect on performance score after 12 wk (P = 0.047). Increased energy and protein intakes were strongly associated with improved QoL, functional score, hand grip strength, symptom and performance scores. Food delivery service with energy- and protein-rich main meals...

Life cycle costing of waste management systems: Overview, calculation principles and case studies

International Nuclear Information System (INIS)

Martinez-Sanchez, Veronica; Kromann, Mikkel A.; Astrup, Thomas Fruergaard

2015-01-01

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental

Life cycle costing of waste management systems: Overview, calculation principles and case studies

Energy Technology Data Exchange (ETDEWEB)

Martinez-Sanchez, Veronica, E-mail: vems@env.dtu.dk [Technical University of Denmark, Department of Environmental Engineering, Miljoevej, Building 113, 2800 Kgs. Lyngby (Denmark); Kromann, Mikkel A. [COWI A/S, Parallelvej 2, 2800 Kgs. Lyngby (Denmark); Astrup, Thomas Fruergaard [Technical University of Denmark, Department of Environmental Engineering, Miljoevej, Building 113, 2800 Kgs. Lyngby (Denmark)

2015-02-15

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental

The analytical determination of useful life and replacement intervals for equipment located in a non-harsh environment

International Nuclear Information System (INIS)

Glazman, J.S.; Ahluwalia, J.S.; Kneppel, D.S.; Harter, T.G.

1985-01-01

In order to establish useful life and replacement intervals for equipment located in a non-harsh environment, an analysis can be performed to show that either the thermal degradation of the equipment is insignificant over the life of the plant or that certain components must be replaced periodically. In these analyses it is necessary to calculate the thermal lives of the components based on their actual operating temperatures rather than at a single cabinet temperature. The Infrared Thermal Imaging Measurement System is a rapid technique for measuring the temperatures of all points on a board or cabinet side simultaneously. The infrared scan of the operating equipment is displayed on a monitor, analyzed and stored on videotape for future reference. This paper presents an approach to performing such an analysis using the example of a process analysis and display system. The equilibrium operating temperatures of the individual components in the above system were measured by the Infrared Thermal Imaging Measurement System and compared to a calculated maximum permitted service temperature determined by the Arrhenius methodology. Examples will be shown where it was possible to exempt entire assemblies from replacement by showing that no point on the assembly exceeds the calculated maximum permitted temperature

MaROS: Information Management Service

Science.gov (United States)

Allard, Daniel A.; Gladden, Roy E.; Wright, Jesse J.; Hy, Franklin H.; Rabideau, Gregg R.; Wallick, Michael N.

2011-01-01

This software is provided by the Mars Relay Operations Service (MaROS) task to a variety of Mars projects for the purpose of coordinating communications sessions between landed spacecraft assets and orbiting spacecraft assets at Mars. The Information Management Service centralizes a set of functions previously distributed across multiple spacecraft operations teams, and as such, greatly improves visibility into the end-to-end strategic coordination process. Most of the process revolves around the scheduling of communications sessions between the spacecraft during periods of time when a landed asset on Mars is geometrically visible by an orbiting spacecraft. These relay sessions are used to transfer data both to and from the landed asset via the orbiting asset on behalf of Earth-based spacecraft operators. This software component is an application process running as a Java virtual machine. The component provides all service interfaces via a Representational State Transfer (REST) protocol over https to external clients. There are two general interaction modes with the service: upload and download of data. For data upload, the service must execute logic specific to the upload data type and trigger any applicable calculations including pass delivery latencies and overflight conflicts. For data download, the software must retrieve and correlate requested information and deliver to the requesting client. The provision of this service enables several key advancements over legacy processes and systems. For one, this service represents the first time that end-to-end relay information is correlated into a single shared repository. The software also provides the first multimission latency calculator; previous latency calculations had been performed on a mission-by-mission basis.

Concepts of Life in the Contexts of Mars

Science.gov (United States)

Des Marais, D. J.

2014-01-01

The search for habitable environments and life requires a working concept of life's fundamental attributes. This concept helps to identify the "services" that an environment must provide to sustain life. We must consider the possibility that extraterrestrial life might differ fundamentally from our own, but it is still worthwhile to begin by hypothesizing attributes of life that might be universal versus ones that reflect local solutions to survival on Earth.

Dementia as a determinant of social and health service use in the last two years of life 1996-2003

Directory of Open Access Journals (Sweden)

Raitanen Jani

2011-04-01

Full Text Available Abstract Background Dementia is one of the most common causes of death among old people in Finland and other countries with high life expectancies. Dementing illnesses are the most important disease group behind the need for long-term care and therefore place a considerable burden on the health and social care system. The aim of this study was to assess the effects of dementia and year of death (1998-2003 on health and social service use in the last two years of life among old people. Methods The data were derived from multiple national registers in Finland and comprise all those who died in 1998, 2002 or 2003 and 40% of those who died in 1999-2001 at the age of 70 or over (n = 145 944. We studied the use of hospitals, long-term care and home care in the last two years of life. Statistics were performed using binary logistic regression analyses and negative binomial regression analyses, adjusting for age, gender and comorbidity. Results The proportion of study participants with a dementia diagnosis was 23.5%. People with dementia diagnosis used long-term care more often (OR 9.30, 95% CI 8.60, 10.06 but hospital (OR 0.33, 95% CI 0.31, 0.35 and home care (OR 0.50, 95% CI 0.46, 0.54 less often than people without dementia. The likelihood of using university hospital and long-term care increased during the eight-year study period, while the number of days spent in university and general hospital among the users decreased. Differences in service use between people with and without dementia decreased during the study period. Conclusions Old people with dementia used long-term care to a much greater extent and hospital and home care to a lesser extent than those without dementia. This difference persisted even when controlling for age, gender and comorbidity. It is important that greater attention is paid to ensuring that old people with dementia have equitable access to care.

Residual life assessment of thick wall boiler parts

International Nuclear Information System (INIS)

Mehdizadeh, M.; Rayatpour, M.

2004-01-01

Thick wall components of boiler, such as headers, main steam lines and hot reheat lines, operate at high temperature and stress condition. This condition makes various failure mechanisms to activate during service exposure that gradually deteriorate the microstructure of components. Consequently, knowing about metallurgical condition and remaining life sensitive components particularly in power plants with at least 100,000 her life time is of considerable importance. In this regard, to eliminate unexpected interruptions and reduce the repairing costs, life assessment technology is being used. Various life assessment methods have been developed for power plants components and entered industrial fields. In the present work, remaining life of drums, headers and main steam lines of a power plant were evaluated, using microstructural, hardness changes and dimensional checking methods with non destructive tests. The results show that, the components have appropriate condition according to their service life. Further more, it was revealed that hardness evaluation technique is not a reliable evaluation criteria and various methods should be used for accurate life assessment

Rejuvenation of service exposed ammonia cracker tubes of cast Alloy 625 and their re-use

Energy Technology Data Exchange (ETDEWEB)

Singh, J.B., E-mail: jbsingh@barc.gov.in [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Verma, A. [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Jaiswal, D.M.; Kumar, N.; Patel, R.D. [Heavy Water Board, Department of Atomic Energy, Anushakti Nagar, Mumbai 400094 (India); Chakravartty, J.K. [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

2015-09-17

This study is an extension of a previous study undertaken to rejuvenate ammonia cracker tubes of Alloy 625 alloy that have been service exposed in heavy water plants for their full service life of 100,000 h. The service exposure caused significant microstructural modifications and deterioration in mechanical properties, and a solution annealing treatment of 2 h at 1160 °C rejuvenated all properties similar to those of the virgin alloy. The present study reports the evolution of microstructure and mechanical properties of a full service exposed centrifugally cast Alloy 625 tube that was put into service again for 55,000 h after receiving a rejuvenation treatment. During the second service, microstructural modifications, increase in strength and loss of ductility were on the lines of the work reported earlier. However, it was encouraging to observe that degraded properties after the second service life remained within the bounds of those of virgin and full service exposed tubes. The good performance of the rejuvenated tube during the second service life has been attributed to good control of operation parameters that limited the precipitation of grain boundary carbides during the first service life, which otherwise would have had a direct bearing on premature failure of tubes during their second service life.

Life-long Services in the Field of Information and Communication Technologies (ICT in Romania during 2004-2007

Directory of Open Access Journals (Sweden)

Manuela Sofia Stănculescu

2009-01-01

Full Text Available This study presents the results of empirical research on life-long services in the domain of information and communication technologies (ICT carried out within the framework of the project Matching educational supply with labour market in ICT sector in Romania: horizon 2015, co-ordinated by Institute of World Economy. Survey sample includes all providers authorised by National Council for Adult Vocational Training (CNFPA, a part of EDCL certification bodies, Microsoft Net Academy (programme implemented by universities, but also by a specialized firm in vocational training selected in survey, Cisco Net Academy, in total 215 vocational training providers from all around the country, out of which 77 (36% are private companies. Empirical research results (52% response rate allowed to analyze the actual state of vocational training supply in Romania in the period 2004-2007, including: (i identifying the main pratices, strategies and problems of vocational training services providers in ICT sector; ii emphasizing the main characteristics of lifelong learning programmes in ICT sector provided between 2004 and 2007; (iii determining the programme types and their target segment of population; and (iv pointing out the mechanisms of adjusting the supply to labour market needs.

Stress and quality of life among parents of children with congenital heart disease referred for psychological services.

Science.gov (United States)

Kaugars, Astrida; Shields, Clarissa; Brosig, Cheryl

2018-01-01

The study examined parent stress and health-related quality of life (HRQOL) among families of children with congenital heart disease (CHD) referred for psychological services. Parents of 54 children (85% boys) aged 3 to 13 (M age  = 7.48, SD = 2.38) completed measures to assess parenting stress (Parenting Stress Index - Short Form; Pediatric Inventory for Parents) and the PedsQL Family Impact Module. Medical information was retrieved from medical record review. Half of parents of children with single ventricle anatomy had clinically significant levels of parenting stress. Parents of children with single ventricle anatomy reported more frequent illness-related stress and more difficulty dealing with illness-related stress than parents of children with two ventricle anatomy. Younger gestational age at birth and referral for attention or behavior problems were associated with greater likelihood of parent at-risk psychosocial functioning. Among children referred for psychological services, many parents report significant stress and significant negative impact of the child's medical condition on the family. Results underscore the need to consider assessing parent psychosocial functioning and providing additional support for parents of children with CHD. © 2017 Wiley Periodicals, Inc.

Improving cardiovascular health of underserved populations in the community with Life's Simple 7.

Science.gov (United States)

Murphy, Marcia Pencak; Coke, Lola; Staffileno, Beth A; Robinson, Janis D; Tillotson, Robin

2015-11-01

The purpose of this nurse practitioner (NP) led initiative was to improve the cardiovascular health of two underserved populations in the community using the American Heart Association (AHA) Life's Simple 7 and My Life Check (MLC) tools. Two inner city community sites were targeted: (a) a senior center servicing African American (AA) older adults, and (b) a residential facility servicing homeless women. Preprogram health data (blood pressure, cholesterol, blood glucose levels, body mass index, and health behaviors) were collected to calculate MLC scores. Postprogram health data were obtained on participants with the lowest MLC scores who completed the program. Eight older adults completed the program with a 37.1% increase in average MLC score (6.2 vs. 8.5). Ten women completed the program with a 9.3% decrease in average MLC score (4.3 vs. 3.9). Favorable benefits were observed in the AA older adults. In contrast, similar benefits were not observed in the women, which may be because of a constellation of social, environmental, biological, and mental health factors. NPs are prepared to target community-based settings to address the health of underserved populations. Engaging key stakeholders in the planning and implementation is essential for success. ©2015 American Association of Nurse Practitioners.

Coupling between cracking and permeability, a model for structure service life prediction

International Nuclear Information System (INIS)

Lasne, M.; Gerard, B.; Breysse, D.

1993-01-01

Many authors have chosen permeability coefficients (permeation, diffusion) as a reference for material durability and for structure service life prediction. When we look for designing engineered barriers for radioactive waste storage we find these macroscopic parameters very essential. In order to work with a predictive model of transfer properties evolution in a porous media (concrete, mortar, rock) we introduce a 'micro-macro' hierarchical model of permeability whose data are the total porosity and the pore size distribution. In spite of the simplicity of the model (very small CPU time consuming) comparative studies show predictive results for sound cement pastes, mortars and concretes. Associated to these works we apply a model of damage due to hydration processes at early ages to a container as a preliminary underproject for the definitive storage of Low Level radioactive Waste (LLW). Data are geometry, cement properties and damage measurement of concrete. This model takes into account the mechanical property of the concrete maturation (volumic variations during cement hydration can damage the structures). Some local microcracking can appear and affect the long term durability. Following these works we introduce our research program for the concrete cracking analysis. An experimental campaign is designed in order to determine damage-cracking-porosity-permeability coupling. (authors). 12 figs., 16 refs

Service-learning abroad: a life-changing experience for nursing students.

Science.gov (United States)

Hawkins, Janice Evans; Vialet, Channel L

2012-01-01

Incorporating service-learning experiences into nursing education is one way to help prepare students for practice in a global, culturally diverse society. Partnering with a church with a long-term mission program in El Salvador offers the nursing school at Old Dominion University opportunity to develop a service-learning program and support healthcare missions.

Operational source receptor calculations for large agglomerations

Science.gov (United States)

Gauss, Michael; Shamsudheen, Semeena V.; Valdebenito, Alvaro; Pommier, Matthieu; Schulz, Michael

2016-04-01

For Air quality policy an important question is how much of the air pollution within an urbanized region can be attributed to local sources and how much of it is imported through long-range transport. This is critical information for a correct assessment of the effectiveness of potential emission measures. The ratio between indigenous and long-range transported air pollution for a given region depends on its geographic location, the size of its area, the strength and spatial distribution of emission sources, the time of the year, but also - very strongly - on the current meteorological conditions, which change from day to day and thus make it important to provide such calculations in near-real-time to support short-term legislation. Similarly, long-term analysis over longer periods (e.g. one year), or of specific air quality episodes in the past, can help to scientifically underpin multi-regional agreements and long-term legislation. Within the European MACC projects (Monitoring Atmospheric Composition and Climate) and the transition to the operational CAMS service (Copernicus Atmosphere Monitoring Service) the computationally efficient EMEP MSC-W air quality model has been applied with detailed emission data, comprehensive calculations of chemistry and microphysics, driven by high quality meteorological forecast data (up to 96-hour forecasts), to provide source-receptor calculations on a regular basis in forecast mode. In its current state, the product allows the user to choose among different regions and regulatory pollutants (e.g. ozone and PM) to assess the effectiveness of fictive emission reductions in air pollutant emissions that are implemented immediately, either within the agglomeration or outside. The effects are visualized as bar charts, showing resulting changes in air pollution levels within the agglomeration as a function of time (hourly resolution, 0 to 4 days into the future). The bar charts not only allow assessing the effects of emission

Examination of Life Satisfaction, Child Maltreatment Potential and Substance Use in Mothers Referred for Treatment by Child Protective Services for Child Neglect and Substance Abuse: Implications for Intervention Planning

Science.gov (United States)

Plant, Christopher P.; Donohue, Brad; Holland, Jason M.

2015-01-01

There is evidence to suggest mothers who are served by child protective service agencies are relatively dissatisfied in their lives, leading some investigators to conclude life dissatisfaction may be associated with child maltreatment. To assist in better understanding this relationship the Life Satisfaction Scale for Caregivers (LSSC) was psychometrically developed in a sample of 72 mothers who were referred for behavioral treatment for child neglect and substance abuse by caseworkers from a local child protective service agency. The LSSC was developed to assess mothers’ happiness in nine domains (family, friendships, employment/work, spirituality/religion, safety, sex life/dating, ability to avoid drugs, ability to avoid alcohol, control over one’s own life). Results indicated two factors that appeared to be relevant to Social Satisfaction and Safety and Control Satisfaction. Higher satisfaction scores on both of these scales were negatively associated with child maltreatment potential and substance use at baseline (i.e., positive urinalysis test). Mothers who exposed their children to substances in utero or in infancy (a distinct type of child neglect) were found to report higher satisfaction scores on the LSSC than other types of child neglect. Hispanic-American, African-American, and Caucasian women reported similar levels of life satisfaction. Application of the LSSC as a non-stigmatizing, wellness-focused instrument is discussed within the context of intervention planning. PMID:27617042

Comparison of Thermal Creep Strain Calculation Results Using Time Hardening and Strain Hardening Rules

International Nuclear Information System (INIS)

Kim, Junehyung; Cheon, Jinsik; Lee, Byoungoon; Lee, Chanbock

2014-01-01

One of the design criteria for the fuel rod in PGSFR is the thermal creep strain of the cladding, because the cladding is exposed to a high temperature for a long time during reactor operation period. In general, there are two kind of calculation scheme for thermal creep strain: time hardening and strain hardening rules. In this work, thermal creep strain calculation results for HT9 cladding by using time hardening and strain hardening rules are compared by employing KAERI's current metallic fuel performance analysis code, MACSIS. Also, thermal creep strain calculation results by using ANL's metallic fuel performance analysis code, LIFE-METAL which adopts strain hardening rule are compared with those by using MACSIS. Thermal creep strain calculation results for HT9 cladding by using time hardening and strain hardening rules were compared by employing KAERI's current metallic fuel performance analysis code, MACSIS. Also, thermal creep strain calculation results by using ANL's metallic fuel performance analysis code, LIFE-METAL which adopts strain hardening rule were compared with those by using MACSIS. Tertiary creep started earlier in time hardening rule than in strain hardening rule. Also, calculation results by MACSIS with strain hardening and those obtained by using LIFE-METAL were almost identical to each other

Stored energy calculation: the state of the art

International Nuclear Information System (INIS)

Cunningham, M.E.; Lanning, D.D.; Olsen, A.R.; Williford, R.E.; Hann, C.R.

1978-05-01

The report is the result of an investigation to determine the current state of the art of fuel temperature, gap conductance, and stored energy calculations. Major emphasis was placed on the propagation of input and model uncertainties. To support this study a comparison was made to the observed variability of experimental data for fuel centerline temperature and gap conductance values. The uncertainty analysis was performed by identifying major thermal models and collecting them into an abstract of a thermal performance code. Uncertainties in the calculations were determined using the method of propagation of uncertainties with a first order Taylor series approximation to the nonlinear functions. Output uncertainty results are presented for the beginning of fuel life, the end of life, and throughout a typical power history. Also presented is an influence and importance analysis for the input parameters. It is concluded that the relative uncertainty in stored energy is approximately +-20 percent at beginning of fuel life, and increases to +-25 to 40 percent contact. The foregoing are 3 sigma (99.9 percent) confidence intervals. The most important contributors to stored energy uncertainty are linear heat rating and fuel thermal conductivity

Carbon calculators as a tool for a low-carbon everyday life?

DEFF Research Database (Denmark)

Gram-Hanssen, Kirsten; Christensen, Toke Haunstrup

2012-01-01

survey and focus groups with users of a Danish Internet-based carbon calculator developed in 2009, the year of the Climate Summit in Copenhagen, when climate change was prominent on the political agenda. The article concludes that the subject website primarily attracts people already interested...

Bias of averages in life-cycle footprinting of infrastructure: truck and bus case studies.

Science.gov (United States)

Taptich, Michael N; Horvath, Arpad

2014-11-18

The life-cycle output (e.g., level of service) of infrastructure systems heavily influences their normalized environmental footprint. Many studies and tools calculate emission factors based on average productivity; however, the performance of these systems varies over time and space. We evaluate the appropriate use of emission factors based on average levels of service by comparing them to those reflecting a distribution of system outputs. For the provision of truck and bus services where fuel economy is assumed constant over levels of service, emission factor estimation biases, described by Jensen's inequality, always result in larger-than-expected environmental impacts (3%-400%) and depend strongly on the variability and skew of truck payloads and bus ridership. Well-to-wheel greenhouse gas emission factors for diesel trucks in California range from 87 to 1,500 g of CO2 equivalents per ton-km, depending on the size and type of trucks and the services performed. Along a bus route in San Francisco, well-to-wheel emission factors ranged between 53 and 940 g of CO2 equivalents per passenger-km. The use of biased emission factors can have profound effects on various policy decisions. If average emission rates must be used, reflecting a distribution of productivity can reduce emission factor biases.