WorldWideScience

Sample records for serinus canaria additional

  1. Hatching asynchrony aggravates inbreeding depression in a songbird (Serinus canaria): an inbreeding-environment interaction.

    Science.gov (United States)

    de Boer, Raïssa A; Eens, Marcel; Fransen, Erik; Müller, Wendt

    2015-04-01

    Understanding how the intensity of inbreeding depression is influenced by stressful environmental conditions is an important area of enquiry in various fields of biology. In birds, environmental stress during early development is often related to hatching asynchrony; differences in age, and thus size, impose a gradient in conditions ranging from benign (first hatched chick) to harsh (last hatched chick). Here, we compared the effect of hatching order on growth rate in inbred (parents are full siblings) and outbred (parents are unrelated) canary chicks (Serinus canaria). We found that inbreeding depression was more severe under more stressful conditions, being most evident in later hatched chicks. Thus, consideration of inbreeding-environment interactions is of vital importance for our understanding of the biological significance of inbreeding depression and hatching asynchrony. The latter is particularly relevant given that hatching asynchrony is a widespread phenomenon, occurring in many bird species. The exact causes of the observed inbreeding-environment interaction are as yet unknown, but may be related to a decrease in maternal investment in egg contents with laying position (i.e. prehatching environment), or to performance of the chicks during sibling competition and/or their resilience to food shortage (i.e. posthatching environment). © 2015 The Author(s).

  2. Identification and antimicrobial resistance of members from the Enterobacteriaceae family isolated from canaries (Serinus canaria

    Directory of Open Access Journals (Sweden)

    Ruben V. Horn

    2015-06-01

    Full Text Available Abstract: The Enterobacteriaceae family contains potentially zoonotic bacteria, and their presence in canaries is often reported, though the current status of these in bird flocks is unknown. Therefore, this study aimed to identify the most common genera of enterobacteria from canaries (Serinus canaria and their antimicrobial resistance profiles. From February to June of 2013, a total of 387 cloacal swab samples from eight domiciliary breeding locations of Fortaleza city, Brazil, were collected and 58 necropsies were performed in canaries, which belonged to the Laboratory of Ornithological Studies. The samples were submitted to microbiological procedure using buffered peptone water and MacConkey agar. Colonies were selected according to their morphological characteristics on selective agar and submitted for biochemical identification and antimicrobial susceptibility. A total of 61 isolates were obtained, of which 42 were from cloacal swabs and 19 from necropsies. The most isolated bacteria was Escherichia coli with twenty five strains, followed by fourteen Klebsiellaspp., twelve Enterobacterspp., seven Pantoea agglomerans, two Serratiaspp. and one Proteus mirabilis. The antimicrobial to which the strains presented most resistance was sulfonamides with 55.7%, followed by ampicillin with 54.1% and tetracycline with 39.3%. The total of multidrug-resistant bacteria (MDR was 34 (55.7%. In conclusion, canaries harbor members of the Enterobacteriaceae family and common strains present a high antimicrobial resistance rate, with a high frequency of MDR bacteria.

  3. Amplitude modulation of sexy phrases is salient for song attractiveness in female canaries (Serinus canaria).

    Science.gov (United States)

    Pasteau, Magali; Ung, Davy; Kreutzer, Michel; Aubin, Thierry

    2012-07-01

    Song discrimination and recognition in songbird species have usually been studied by measuring responses to song playbacks. In female canaries, Serinus canaria, copulation solicitation displays (CSDs) are used as an index of female preferences, which are related to song recognition. Despite the fact that many studies underline the role of song syntax in this species, we observed that short segments of songs (a few seconds long) are enough for females to discriminate between conspecific and heterospecific songs, whereas such a short duration is not sufficient to identify the syntax rules. This suggests that other cues are salient for song recognition. In this experiment, we investigated the influence of amplitude modulation (AM) on the responses (CSDs) of female canaries to song playbacks. We used two groups of females: (1) raised in acoustic isolation and (2) raised in normal conditions. When adult, we tested their preferences for sexy phrases with different AMs. We broadcast three types of stimuli: (1) songs with natural canary AM, (2) songs with AM removed, or (3) song with wren Troglodytes troglodytes AM. Results indicate that female canaries prefer and have predispositions for a song type with the natural canary AM. Thus, this acoustic parameter is a salient cue for song attractiveness.

  4. Modulation by steroid hormones of a ''sexy'' acoustic signal in an Oscine species, the Common Canary Serinus canaria

    Directory of Open Access Journals (Sweden)

    Rybak Fanny

    2004-01-01

    Full Text Available The respective influence of testosterone and estradiol on the structure of the Common Canary Serinus canaria song was studied by experimentally controlling blood levels of steroid hormones in males and analyzing the consequent effects on acoustic parameters. A detailed acoustic analysis of the songs produced before and after hormonal manipulation revealed that testosterone and estradiol seem to control distinct song parameters independently. The presence of receptors for testosterone and estradiol in the brain neural pathway controlling song production strongly suggests that the observed effects are mediated by a steroid action at the neuronal level.

  5. Modulation by steroid hormones of a "sexy" acoustic signal in an Oscine species, the Common Canary Serinus canaria.

    Science.gov (United States)

    Rybak, Fanny; Gahr, Manfred

    2004-06-01

    The respective influence of testosterone and estradiol on the structure of the Common Canary Serinus canaria song was studied by experimentally controlling blood levels of steroid hormones in males and analyzing the consequent effects on acoustic parameters. A detailed acoustic analysis of the songs produced before and after hormonal manipulation revealed that testosterone and estradiol seem to control distinct song parameters independently. The presence of receptors for testosterone and estradiol in the brain neural pathway controlling song production strongly suggests that the observed effects are mediated by a steroid action at the neuronal level.

  6. Reversing song behavior phenotype: testosterone driven induction of singing and measures of song quality in adult male and female canaries (Serinus canaria)

    Science.gov (United States)

    Madison, Farrah N.; Rouse, Melvin L.; Balthazart, Jacques; Ball, Gregory F

    2014-01-01

    In songbirds, such as canaries (Serinus canaria), the song control circuit has been shown to undergo a remarkable change in morphology in response to exogenous testosterone (T). It is also well established that HVC, a telencephalic nucleus involved in song production, is significantly larger in males than in females. T regulates seasonal changes in HVC volume in males and exposure to exogenous T in adult females increases HVC volume and singing activity such that their song becomes more male-like in frequency and structure. However, whether there are sex differences in the ability of T to modulate changes in the song system and song behavior has not been investigated in canaries. In this study, we compared the effects of increasing doses of T on singing and song control nuclei volumes in adult male and female American Singer canaries exposed to identical environmental conditions. Males were castrated and all birds were placed on short days (8L:16D) for 8 weeks. Males and females were implanted either with a 2, 6 or 12 mm long Silastic™ implant filled with crystalline T or an empty 12 mm implant as control. Birds were then housed individually in sound attenuated chambers. Brains were collected from six birds from each group after 1 week or 3 weeks of treatment. Testosterone was not equally effective in increasing singing activity in both males and females. Changes in song quality and occurrence rate took place after a shorter latency in males than in females however, females did undergo marked changes in a number of measures of song behavior if given sufficient time. Males responded with an increase in HVC volume at all three doses. In females, T-induced changes in HVC volume only had limited amplitude and these volumes never reached male-typical levels a suggesting that there are sex differences in the neural substrate that responds to T. PMID:25260250

  7. Multi-state analysis of the impacts of avian pox on a population of Serins (Serinus serinus): The importance of estimating recapture rates

    Science.gov (United States)

    Senar, J.C.; Conroy, M.J.

    2004-01-01

    Disease is one of the evolutionary forces shaping populations. Recent studies have shown that epidemics like avian pox, malaria, or mycoplasmosis have affected passerine population dynamics, being responsible for the decline of some populations or disproportionately killing males and larger individuals and thus selecting for specific morphotypes. However, few studies have estimated the effects of an epidemic by following individual birds using the capture-recapture approach. Because avian pox can be diagnosed by direct examination of the birds, we are here able to analyze, using multistate models, the development and consequences of an avian pox epidemic affecting in 1996, a population of Serins (Serinus serinus) in northeastern Spain. The epidemics lasted from June to the end of November of 1996, with a maximum apparent prevalence rate > 30% in October. However, recapture rate of sick birds was very high (0.81, range 0.37-0.93) compared to that of healthy birds (0.21, range 0.020-32), which highly inflated apparent prevalence rate. This was additionally supported by the low predicted transition from the state of being uninfected to the state of being infected (0.03, SE 0.03). Once infected, Serin avian pox was very virulent with (15-day) survival rate of infected birds being of only 0.46 (SE 0.17) compared to that of healthy ones (0.87, SE 0.03). Probability of recovery from disease, provided that the bird survived the first two weeks, however, was very high (0.65, SE 0.25). The use of these estimates together with a simple model, allowed us to predict an asymptotic increase to prevalence of about 4% by the end of the outbreak period, followed by a sharp decline, with the only remaining infestations being infected birds that had not yet recovered. This is in contrast to the apparent prevalence of pox and stresses the need to estimate recapture rates when estimating population dynamics parameters. ?? 2004 Museu de Cie??ncies Naturals.

  8. El modelo turistico de canarias

    Directory of Open Access Journals (Sweden)

    Josefina Dominguez Mujica

    2010-11-01

    Full Text Available Le développement du tourisme de masses dans les Îles Canaries a commencé au début des années 1960. Le modèle adopté repose sur les mêmes logiques que les aménagements touristiques des littoraux méditerranéens espagnols qui ont abouti à d’intenses processus d’urbanisation. Actuellement, la fréquentation touristique de l’archipel indique la préférence des clientèles de l’Ouest-européen, surtout des allemandes et britanniques. Le tourisme s’est affirmé comme le véritable moteur de l’économie de l’archipel.The development of mass tourism in the Canary Islands started in middle of the 20th century, at the beginning of the 60’s. The adopted model was contemporary and very similar to the model of other coastal areas of the Spanish State, which were affected by an intense urbanization process. Nowadays, the profile of the tourism that visits us shows the preference of Centre-European citizens for this destiny, predominately German and British. As regards the tourist offer, the tour-operators policy, the environmental and patrimonial factors, as well as the institutional and managerial support have been definitive. That’s why this sector has become the motor of the archipelago’s economy.El desarrollo del turismo de masas en Canarias se inició a principios de la década de los años sesenta del siglo XX. El modelo adoptado fue coetáneo y muy semejante al de otras zonas litorales del Estado español, que se vieron afectadas por un intenso proceso de urbanización. Acutalmente, el perfil del turismo que nos visita nos indica la preferencia de los centroeuropeos por este destino, predominantemente, de los alemanes y británicos. En cuanto a la oferta turística, la política de los tour-operadores, los factores medio-ambientales y patrimoniales, así como el apoyo de las instituciones y de los empresarios han sido decisivos. Por ello, este sector se ha convertido en el motor de la economía del Archipiélago.

  9. Spatial Tourist and Functional Diversity on the Volcanic Island of Gran Canaria

    Science.gov (United States)

    Gonda-Soroczyńska, Eleonora; Olczyk, Hanna

    2017-10-01

    The conducted research is focused on spatial, functional and landscape diversity, the existing tourist potential and the possibilities for further development of a small, volcanic island of Gran Canaria. The discussed island was compared against other islands of the Canarian archipelago (Lanzarote, Fuerteventura, Tenerife, La Palma, El Hierro). Similarly to the remaining Canary Islands, the economy of Gran Canaria is predominantly based on tourism (approx. 4,5-5,0 million tourists visit the Canary Island annually and approx. 2,8 million come to Gran Canaria). Additionally, Puerto de la Luz transhipment centre in Las Palmas plays a very important role because of the goods imported from overseas. It is one of the largest ports in Spain (it reloads almost 2 million containers per year) also being an important Atlantic refuelling station. Apart from tourism, an important role is played here by agriculture, primarily the cultivation of bananas and tomatoes, which represent the most significant export good of the archipelago. The conducted spatial research showed an extensive diversity. This situation is, to a great extent, influenced by the climate. The northern part is cooler and dominated by agriculture, whereas the southern one is much warmer and characterized by a well-developed tourism infrastructure. Site inspections performed out along the outer contour of the island resembling a circle. Numerous architectural and urban sketches, urban analyses and photographic documentation were made. Community surveys were carried out. For a researcher, it was extremely interesting to answer the questions whether Gran Canaria is different from the other Canary Islands, especially in the functional and landscape context, and if so what exactly these differences consist of. What is Gran Canaria in particular characterized by and what kind of role it plays in the economic sector of Spain?

  10. Atmospheric corrosion in Gran Canaria specifically meteorological and pollution conditions

    International Nuclear Information System (INIS)

    Gonzalez, J.E.G.; Valles, M.L.; Mirza R, J.C.

    1998-01-01

    Carbon steel, copper, zinc and aluminium samples were exposed in different sizes with known ambient parameters in Gran Canaria Island and atmospheric corrosion was investigated. Weight-loss measurements used to determine corrosion damage were complemented with metallographic and XP S determination in order to characterize the structure and morphology of surface corrosion products. The ambient aggressiveness could be well evaluated from meteorological and pollution data. All atmospheric corrosion and environmental data were statistically processed for establishing general corrosion damage functions for carbon steel, copper, aluminium and zinc in terms of Gran Canaria extreme meteorological and pollution parameters. (Author)

  11. Tarabilla canaria: ¿por qué tan vulnerable?

    OpenAIRE

    Illera, Juan Carlos; Díaz, Mariano; Nogales, Manuel

    2006-01-01

    Hoy en día la tarabilla canaria sólo vive en Fuerteventura. Que no esté asentada en otras islas de Canarias similares y cercanas, como Lanzarote y Lobos, parece indicar un déficit de habitats semiáridos de calidad. La fidelidad a sus territorios actuales hace a esta pequeña ave amenazada muy vulnerable a impactos como el desarrollo turístico, el exceso de pastoreo o la depredación por gatos asilvestrados.

  12. Epidemiological survey of zoonotic helminths in feral cats in Gran Canaria island (Macaronesian archipelago-Spain).

    Science.gov (United States)

    Rodríguez-Ponce, Eligia; González, Jorge F; Conde de Felipe, Magnolia; Hernández, Julia N; Raduan Jaber, J

    2016-09-01

    The presence of zoonotic parasites in feral cats have been widely considered all over the world. In Gran Canaria (Macaronesian archipelago, Canary Islands, Spain) the number of feral cats has grown out of control in urban and rural areas. 48 of Felis catus captured in different Gran Canaria areas were studied. Animals were necropsied and several organs were systematically examined in order to collect and identify macroscopic parasites. In addition, coprological tests were done in 28 cats. There were no statistically significant differences in the prevalence rate among sex, age or capture area, showing an overall prevalence of helminths of 77.1%. The most common tapeworms were Dipylidium caninum (64.6%) and Taenia taeniaeformis (31.3%), followed by the nematodes Toxocara cati (20.8%), Ancylostoma tubaeforme (18.8%), Aelurostrongylusabstrusus (10.4%) and Trichuris vulpis (2.08%). We also find several eggs of Alaria alata in the small intestine of one cat (2.08%), being the first description of this trematode in cats in the Canary Islands. Aproximatelly, 40% of the studied cats harboured more than one parasite. High rates of zoonotic species found in these animals suggest the need of controling parasitic infections and preventive measures against them.

  13. El poblamiento en la comarca suroccidental de Gran Canaria

    OpenAIRE

    Lozano Mas, María Yazmina

    2006-01-01

    [ES] Este es un resumen representativo de un ambicioso trabajo de investigación que intenta ahondar en los aspectos metodológicos de la demografía histórica y el conocimiento de los aspectos históricos que rodean al poblamiento histórico de un territorio montañoso. El caso de la comarca suroccidental de Gran Canaria reúne una serie de connotaciones sobre las características y comportamientos de la población y sus distintas formas de apropiación del espacio. Ello tiene su traslación a la actua...

  14. Consideraciones en torno a los sistemas productivos de las sociedades prehistóricas canarias: los modelos de Tenerife y Gran Canaria

    Directory of Open Access Journals (Sweden)

    Javier Velasco Vázquez

    2013-11-01

    Full Text Available En el presente trabajo se analizan diversos aspectos de los sistemas productivos aborígenes de Tenerife y Gran Canaria y su incidencia en la organización socioeconómica de ambas formaciones.In this paper we aim to analyse some aspects about aborigine productive systems of Tenerife and Gran Canaria and their incidence in the socioeconomic organisation of these communities.

  15. Patient safety against radioelectric emissions internal and external at the Hospital Universitario de Canarias

    International Nuclear Information System (INIS)

    Febles Santana, V.; Martin Diaz, M. a.; Miguel Bilbao, S. de; Suarez Rodriguez, D. S.; Hernandez Armas, J. A.; Fernandez de Aldecoa, J. C.; Ramos Gonzalez, V.

    2011-01-01

    Electromagnetic fields (EMF) present in a health center, must be known and to be controlled so that your levels are at all times below the limits established by law in the face of patient safety, health personnel and other users. In addition, they may be the source of interference on medical equipment and, consequently, the cause of errors in diagnosis or treatments applied to the sick. This paper presents the results of the measurements made at the Hospital Universitario de Canarias (HUC) EMF levels of radio emissions from the antennas installed in our hospital (Tetra, pagers, and wi-fi) and external emissions from most relevant, either because of their widespread use (mobile phones) or the proximity to the Hospital of the antennas (commercial broadcasters).

  16. Clero americano y secularización en Canarias

    Directory of Open Access Journals (Sweden)

    Juan Manuel SANTANA PÉREZ

    2009-12-01

    Full Text Available En general siempre se ha hablado de lo que el Archipiélago Canario aportó en América y en pocas ocasiones se ha tratado el fenómeno inverso.Una orden religiosa, de las pocas que no procedían de Europa, se fundó allí y trató de incorporarse a la vida española empezando por las Islas Canarias, pero tropezó con una serie de obstáculos que a la larga fueron insalvables: los bethlemitas.Los problemas surgidos ante la solicitud de los religiosos bethlemitas para instalarse en el Archipiélago, son un claro ejemplo de la lucha entre el Estado y la Iglesia por controlar la asistencia social y la instrucción pública durante el Antiguo Régimen, dos importantes parcelas de la supraestructura.Los intentos de fundar esta orden, encargada de la beneficencia y de la educación de la juventud, en las Islas Canarias, no se produjo en otras zonas del Estado español, por lo cual nos encontramos ante un fenómeno particular. Además es de gran interés observar como las relaciones canario-americanas no sólo se produjeron de forma unilateral, sino que en muchos casos fueron recíprocas, como si se tratase de un «efecto boomerang»

  17. Cuba, Canarias y la prensa, en el contexto del 98

    Directory of Open Access Journals (Sweden)

    Lic. Ileana Medina Hernández

    1998-01-01

    Full Text Available 1898 es para España el año del Desastre, con mayúscula; 1898 es para Cuba el año de la independencia, quizá con minúscula. Canarias es la puerta de salida de Europa; Cuba es puerta la entrada de América. La migración canario - cubana ha sido un factor histórico decisivo en la formación de ambas nacionalidades. La prensa de masas naciente a fines del siglo XIX jugó un papel determinante en la guerra hispano-norteamericana y su desenlace. Conjugando esas cuatro sentencias aplastantes y archiconocidas, la investigación del reflejo del proceso independentista cubano en la prensa de canaria aporta sustanciosos elementos al conocimiento del papel de los procesos de comunicación en la historia y en la cultura de ambos archipiélagos, en el importante contexto del fin de siglo XIX.

  18. territorial de la población de Canarias

    Directory of Open Access Journals (Sweden)

    Antonio Álvarez Alonso

    2005-01-01

    Full Text Available Este artículo tiene como objetivo analizar el crecimiento y los desplazamientos experimentados por la población de Canarias durante las dos últimas décadas del siglo XX, período en el que el Archipiélago transformó su modelo de desarrollo económico y demográfico. Durante aquellos años el crecimiento demográfico de Canarias fue del doble de la media española, consecuencia de un proceso de carácter inmigratorio jamás conocido. Tal crecimiento afectó de manera desigual a las islas, habiendo alcanzado alguna de ellas tasas anuales diez veces superiores a la media estatal. Al mismo tiempo, se ha producido también un importante desequilibrio en la distribución espacial de la población, pues han crecido muchos los sures, menos los nortes y se han estancado las áreas metropolitanas. A su vez, se han vaciado demográficamente los núcleos de las medianías de los sures a favor de los litorales, consecuencia del cambio del modelo agropecuario por el turístico.

  19. Grupos de poder, familia e Iglesia en Gran Canaria en el Siglo XVII: el clero femenino

    OpenAIRE

    Alemán Ruiz, Esteban

    1996-01-01

    [ES] Estudio del clero regular femenino en la isla de Gran Canaria en el siglo XVII, desde la perspectiva de las estrategias familiares y de los grupos de poder de la sociedad isleña en aquella centuria.

  20. New xenophytes from Gran Canaria (Canary Islands, Spain, with emphasis on naturalized and (potentially invasive species

    Directory of Open Access Journals (Sweden)

    Verloove, F.

    2013-12-01

    Full Text Available Trabajos recientes de campo en Gran Canaria han facilitado el descubrimiento de nuevas localidades para plantas vasculares no nativas. Agave attenuata, Antigonon leptopus, Atriplex nummularia, Cascabela thevetia, Cenchrus echinatus, Cuscuta campestris, Diplachne fusca subsp. uninervia, Diplotaxis tenuifolia, Dysphania anthelmintica (hasta ahora confundida con D. ambrosioides, Eclipta prostrata, Euphorbia pulcherrima, Fagopyrum esculentum, Gossypium barbadense, Lablab purpureus, Lemna minuta, Opuntia leucotricha, Passiflora edulis, Pennisetum glaucum, Phaseolus acutifolius, Pluchea carolinensis, Prosopis juliflora, Salvia microphylla, Schinus terebinthifolius, Senna spectabilis, Solanum chrysotrichum, Tecoma stans, Tipuana tipu, Urochloa mutica, U. plantaginea y Washingtonia se citan por primera vez para las Islas Canarias, mientras que Alopecurus myosuroides, Amaranthus blitoides, Bothriochloa ischaemum var. songarica, Cardamine flexuosa subsp. debilis, Heliotropium curassavicum, Leonotis nepetifolia, Medicago lupulina, Parkinsonia aculeata, Physalis peruviana, Phytolacca americana y Turnera ulmifolia son nuevas para la flora de la isla de Gran Canaria. Finalmente, se confirma la presencia de Paspalum vaginatum, P. distichum y Cortaderia selloana en Gran Canaria.Trabajos recientes de campo en Gran Canaria han facilitado el descubrimiento de nuevas localidades para plantas vasculares no nativas. Agave attenuata, Antigonon leptopus, Atriplex nummularia, Cascabela thevetia, Cenchrus echinatus, Cuscuta campestris, Diplachne fusca subsp. uninervia, Diplotaxis tenuifolia, Dysphania anthelmintica (hasta ahora confundida con D. ambrosioides, Eclipta prostrata, Euphorbia pulcherrima, Fagopyrum esculentum, Gossypium barbadense, Lablab purpureus, Lemna minuta, Opuntia leucotricha, Passiflora edulis, Pennisetum glaucum, Phaseolus acutifolius, Pluchea carolinensis, Prosopis juliflora, Salvia microphylla, Schinus terebinthifolius, Senna spectabilis, Solanum

  1. Fábrica para Frigo-Canarias, S.A. en Jinamar (Teide Gran Canaria – España

    Directory of Open Access Journals (Sweden)

    López Díaz, Luis

    1974-06-01

    Full Text Available This building is situated in Janamar (Telde, Las Palmas in Gran Canaria and to accomplish it the valuable experiences have been utilised that Frigo has collected from its other important factories, foreseeing possible enlargements, rational organization of the operational cycle and easy checking of the whole system of ducts. It has offices, wardrobes and staff diningroom, separate W.C.'s for ladies and gentlemen, fabrication zone, storage, maturation tanks, freezers, cold storage rooms, loading piers, etc. Mention should be made of the hyperbolic paraboloids of reinforced concrete that cover the storage house for cartonnage, for raw material and the big central bay as well as the steam kettle room in the shape of a revolving hyperboloid and glass cover.Este edificio está situado en Jinamar (Telde, Las Palmas de Gran Canaria, y para su organización se han recogido las valiosas experiencias que Frigo ha deducido de sus otras fábricas importantes, previendo posibles ampliaciones, organización racional del ciclo operativo y comodidad de control de todas las canalizaciones. Dispone de oficinas, vestuarios y comedor de empleados, aseos para ambos sexos, zona de fabricación, almacenes, tanques de maduración, congeladores, cámaras frigoríficas, muelles de carga, etc. Son de destacar los paraboloides hiperbólicos de hormigón armado que cubren el almacén de cartonaje, el de materias primas y la gran nave central, así como la cámara de calderas de vapor con forma de hiperboloide de revolución y cubierta de cristal.

  2. El oficio de los neveros en Gran Canaria en el siglo XVIII

    Directory of Open Access Journals (Sweden)

    Salvador Miranda Calderin

    2013-11-01

    Full Text Available A finales del s. XVII el Cabildo Catedral de Canarias, con sede en la capital de Gran Canaria, construyó en la cumbre de la Isla dos pozos de nieve. Allí la recogían y conservaban hasta que era transportada en verano a la ciudad. Las libras de nieve se vendieron en la «nevería» ubicada en la trasera de la Catedral desde 1694 hasta 1866. En este artículo estudiamos el oficio de nevero en Gran Canaria, que había sido olvidado por completo, sus salarios, alimentación y especialidades en el s. XVIII.At the end of XVIIIth century the Canary Cathedral Chapter, settled in Gran Canaria Island capital, built, up in the mountains, two snow wells. Workers collected the snow and filled the wells until it was transported, in summer time, from the top of the island (1.949 meters to the city. Snow pounds were sold in the back of the Cathedral from 1694 to 1866. In this article we study the «neveros» job (snow workers in Gran Canaria, that it had been completely forgotten nowdays, their salaries, food and specialities in XVIIIth century.

  3. Islas de ida y vuelta. Canarias y El Caribe en contexto colonial

    Directory of Open Access Journals (Sweden)

    Ortiz García, Carmen

    2004-12-01

    Full Text Available On the presupposition that the conquest of the Canary Islands set the colonial stage for the later Spanish enterprises in the Americas, the author discusses a number of elements of identity shared by the islands of both the eastern Atlantic and the Caribbean. Sugar, the slave trade and the raising of bananas, cochineal and tobacco are the instances chosen for this comparative analysis. In addition, the author makes a reference to the legends of the apparition of the Virgin of Charity at El Cobre, in Cuba, and of Candlemas in Tenerife.

    Partiendo de la idea de que la conquista de las Islas Canarias fue el primer ensayo colonial de lo que luego desarrollarían los españoles en América, se examinan algunos elementos de identidad entre el mundo isleño atlántico y caribeño, producidos precisamente por esa situación inicial de dominio colonial. El azúcar, la trata de esclavos, los cultivos de plátano, grana y tabaco son los ejemplos escogidos para este análisis comparado. Finalmente se hace una referencia comparativa de las leyendas de la aparición de la Virgen de la Caridad del Cobre en Cuba y de la Virgen de Candelaria en Tenerife

  4. Patient safety against radioelectric emissions internal and external at the Hospital Universitario de Canarias; Seguridad de los pacientes frente a emisiones radioelectricas internas y externas en el Hospital Universitario de Canarias

    Energy Technology Data Exchange (ETDEWEB)

    Febles Santana, V.; Martin Diaz, M. a.; Miguel Bilbao, S. de; Suarez Rodriguez, D. S.; Hernandez Armas, J. A.; Fernandez de Aldecoa, J. C.; Ramos Gonzalez, V.

    2011-07-01

    Electromagnetic fields (EMF) present in a health center, must be known and to be controlled so that your levels are at all times below the limits established by law in the face of patient safety, health personnel and other users. In addition, they may be the source of interference on medical equipment and, consequently, the cause of errors in diagnosis or treatments applied to the sick. This paper presents the results of the measurements made at the Hospital Universitario de Canarias (HUC) EMF levels of radio emissions from the antennas installed in our hospital (Tetra, pagers, and wi-fi) and external emissions from most relevant, either because of their widespread use (mobile phones) or the proximity to the Hospital of the antennas (commercial broadcasters).

  5. Seroprevalence of Coxiella burnetii in domestic ruminants in Gran Canaria Island, Spain.

    Science.gov (United States)

    Rodríguez, N F; Carranza, C; Bolaños, M; Pérez-Arellano, J L; Gutierrez, C

    2010-04-01

    Coxiella burnetii is the causative agent of Q fever, a zoonosis with worldwide occurrence. In the Canary Islands, the overall seroprevalence in humans has been estimated to be 21.5%. Gran Canaria island concentrates the highest ruminant population in the archipelago and the prevalence of the human infection is 23.5%. To evaluate the seroprevalence in livestock and the affected areas in Gran Canaria island, a total of 1249 ruminants were randomly selected for this study (733 goats, 369 sheep and 147 cattle). The samples were evaluated using an indirect ELISA Kit. The results showed seroprevalences of 60.4%, 31.7% and 12.2% in goats, sheep and cattle, respectively. Based on these results, Q fever could be considered as endemic in Gran Canaria island. Sanitary measures should be taken at the farm level to minimize the risk of exposure of C. burnetii to humans.

  6. Las actividades agroambientales en Canarias ante los retos de futuro

    Directory of Open Access Journals (Sweden)

    Ramón Díaz Hernández

    2013-10-01

    Full Text Available Las actividades primarias en Canarias, y en especial, la agricultura, presentan una situación de crisis que amenaza con aumentar el abandono de fincas, la reducción de la producción y la pérdida de población rural. Los valores económicos, sociales, ambientales y culturales que caracterizan a estas actividades aconsejan una apuesta más decidida por el mantenimiento del sector, para lo que es necesario replantear en muchas zonas el desarrollo agrario integral vinculándolo a la conservación y recuperación ambiental y cultural, dentro de una concepción de desarrollo sostenible. Pues bien, en este artículo, partiendo de la exposición del valor que tiene la actividad agraria en las Islas, se describe su problemática actual y se apuntan sus oportunidades de desarrollo. Se concluye precisándose, a partir de los instrumentos de intervención existentes, objetivos globales, algunas recomendaciones estratégicas generales y propuestas de intervención que podrían ser tenidos en cuenta.Primary activities in the Canary Islands, and especially agriculture, are undergoing a crisis that threatens to continue to promote a move away from the countryside, a reduction in production and rural de-population. The economic, social, environmental and cultural values that characterise these activities indicate a need for more decisive support for maintaining this sector, making an integral development of farming necessary in many areas, linked to environmental and cultural conservation and recovery, as part of a sustainable development approach to the problem. With the value of farming activities as a starting point, this article describes the current problems and identifies the opportunities for development. The articles concludes by establishing global objectives, based on existing intervention instruments, some general strategic recommendations and proposals for intervention that could be taken on board.

  7. Las remesas indianas en Gran Canaria en el primer cuarto del siglo XVII

    Directory of Open Access Journals (Sweden)

    Elisa TORRES SANTANA

    2009-12-01

    Full Text Available El estudio de las remesas indianas, del dinero que bien en efectivo o en joyas afluía a la isla de Gran Canaria procedente del continente americano, ha sido un problema que ha preocupado en gran medida a los historiadores canarios. Sin embargo, su análisis siempre ha resultado problemático, por varias razones.

  8. The occurrence of mycoplasmas in the lungs of swine in Gran Canaria (Spain)

    DEFF Research Database (Denmark)

    Assuncao, P.; De la Fe, C.; Kokotovic, Branko

    2005-01-01

    The study was conducted to investigate the mycoplasmal flora in the lungs of pigs with enzootic pneumonia at Gran Canaria (Spain). From 54 pneumonic lungs collected at an abattoir, 85 isolates were cultivated. On the basis of cultural and biochemical characteristics, the isolates were preliminarily...

  9. Striking resilience of an island endemic bird to a severe perturbation: the case of the Gran Canaria blue chaffinch

    OpenAIRE

    Moreno, A. C.; Carrascal, L. M.; Delgado, A.; Suárez, V.; Seoane, J.

    2018-01-01

    Marcada resiliencia de una especie de ave insular endémica después de una perturbación intensa: el caso del pinzón azul de Gran Canaria Son pocos los datos disponibles sobre la tendencia demográfica de las especies en peligro de extinción en zonas de protección especial y su capacidad de recuperarse de perturbaciones catastróficas. Se estudia la tendencia demográfica del pinzón azul de Gran Canaria (Fringilla polatzeki), un especialista de hábitat endémico de las Islas Canarias, restrin...

  10. Striking resilience of an island endemic bird to a severe perturbation: the case of the Gran Canaria blue chaffinch

    OpenAIRE

    Moreno, Á. C.; Carrascal, Luis M.; Delgado, A.; Suárez, V.; Seoane, J.

    2018-01-01

    [ES] Striking resilience of an island–endemic bird to a severe perturbation: the case of the Gran Canaria blue chaffinch. Evidence regarding population trends of endangered species in special protection areas and their recovery ability from catastrophic disturbances is scarce. We assessed the population trend of the Gran Canaria blue chaffinch (Fringilla polatzeki), a habitat specialist endemic to the pine forest of Inagua in the Canary Islands, following a devastating wildfire in July 2007. ...

  11. Identification and characterization of rock slope instabilities in Val Canaria (TI, Switzerland) based on field and DEM analyses

    Science.gov (United States)

    Ponzio, Maria; Pedrazzini, Andrea; Matasci, Battista; Jaboyedoff, Michel

    2013-04-01

    In Alpine areas rockslides and rock avalanches represent common gravitational hazards that potentially constitute a danger for people and infrastructures. The aim of this study is to characterize and understand the different factors influencing the distribution of large slope instabilities affecting the Val Canaria (southern Switzerland). In particular the importance of the tectonic and lithological settings as well as the impact of the groundwater circulations are investigated in detail. Val Canaria is a SW-NE trending lateral valley that displays potential large rock slope failure. Located just above one of the main N-S communication way (Highway, Railway) through the Alps, the development of large instabilities in the Val Canaria might have dramatic consequences for the main valley downstream. The dominant geological structure of the study area is the presence of a major tectonic boundary separating two basement nappes, constituted by gneissic lithologies, i.e. the Gotthard massif and the Lucomagno nappe that are located in the northern and southern part of the valley respectively. The basement units are separated by meta-sediments of Piora syncline composed by gypsum, dolomitic breccia and fractured calc-mica schists. Along with detailed geological mapping, the use of remote sensing techniques (Aerial and Terrestrial Laser Scanning) allows us to propose a multi-disciplinary approach that combines geological mapping and interpretation with periodic monitoring of the most active rockslide areas. A large array of TLS point cloud datasets (first acquisition in 2006) constitute a notable input, for monitoring purposes, and also for structural, rock mass characterization and failure mechanism interpretations. The analyses highlighted that both valley flanks are affected by deep-seated gravitational slope deformation covering a total area of about 8 km2 (corresponding to 40% of the catchment area). The most active area corresponds to the lower part of the valley

  12. Hispanismos y canarismos en un corpus de textos ingleses sobre Canarias

    Directory of Open Access Journals (Sweden)

    María-Isabel González-Cruz

    2013-12-01

    Full Text Available ResumenLas Islas Canarias (España siempre han mantenido un estrecho contactocon el mundo anglosajón, lo que ha generado importantes consecuencias económicas, así como también socioculturales, lingüísticas y literarias. Un análisis de la bibliografía inglesa sobre Canarias revela, entre otros aspectos, la tendencia al uso de hispanismos y canarismos. Este trabajo ofrece el registro de esas voces que aparecen en un corpus de catorce obras tomadas de la extensa bibliografía anglocanaria. Tras revisar brevemente la relevancia del hispanismo inglés, nuestra recopilación intenta resaltar la contribución del español de Canarias al enriquecimiento del vocabulario de la lengua inglesa, constatando cuáles de los hispanismos de nuestro corpus que son canarismos han pasado al registro lexicográfico realizado por elShorter Oxford English Dictionary on Historical Principles (2007.AbstractThe Canary Islands (Spain have always been in close contact with the Anglo-Saxon world, which has had important consequences for the economy but also at the socio-cultural, linguistic and literary levels. A review of the English bibliography on the Canaries reveals, among other aspects, a tendency in most authors to use hispanicisms and canarianisms in their texts. This article offers a record of those words which appear in a corpus of fourteen works taken from this extensive bibliography. Apart from providing an overview of the studies on hispanicisms in English, this paper’s main aim is to highlight the contribution of Canarian Spanish to the enrichment of the vocabulary of English by checking which of the hispanicisms in our corpus, which are actually canarianisms, have been included in the lexical repertoire of the Shorter Oxford English Dictionaryon Historical Principles (2007.

  13. Human impacts quantification on the coastal landforms of Gran Canaria Island (Canary Islands)

    Science.gov (United States)

    Ferrer-Valero, Nicolás; Hernández-Calvento, Luis; Hernández-Cordero, Antonio I.

    2017-06-01

    The coastal areas of the Canary Islands are particularly sensitive to changes, both from a natural perspective and for their potential socio-economic implications. In this paper, the state of conservation of an insular coast is approached from a geomorphological point of view, considering recent changes induced by urban and tourism development. The analysis is applied to the coast of Gran Canaria, a small Atlantic island of volcanic origin, subject to a high degree of human pressure on its coastal areas, especially in recent decades. Currently, much of the economic activity of Gran Canaria is linked to mass tourism, associated with climatic and geomorphological features of the coast. This work is addressed through detailed mapping of coastal landforms across the island (256 km perimeter), corresponding to the period before the urban and tourism development (late 19th century for the island's capital, mid-20th century for the rest of the island) and today. The comparison between the coastal geomorphology before and after the urban and tourism development was established through four categories of human impacts, related to their conservation state: unaltered, altered, semi-destroyed and extinct. The results indicate that 43% of coastal landforms have been affected by human impacts, while 57% remain unaltered. The most affected are sedimentary landforms, namely coastal dunes, palaeo-dunes, beaches and wetlands. Geodiversity loss was also evaluated by applying two diversity indices. The coastal geodiversity loss by total or partial destruction of landforms is estimated at - 15.2%, according to Shannon index (H‧), while it increases to - 32.1% according to an index proposed in this paper. We conclude that the transformations of the coast of Gran Canaria induced by urban and tourism development have heavily affected the most singular coastal landforms (dunes, palaeo-dunes and wetlands), reducing significantly its geodiversity.

  14. Escultismo y educación física en Canarias (1912-1920

    Directory of Open Access Journals (Sweden)

    Antonio S. Almeida Aguiar

    2013-10-01

    Full Text Available Uno de los movimientos juveniles que mayor repercusión ha tenido en la historia de la educación ha sido los Boy Scouts. Fundado en 1907 por el general Baden Powell, tenía como fin la mejora social de la juventud inglesa. La extensión de la asociación scout fue rápida y en todo el mundo. En España, al igual que en Canarias, fue introducida en 1912 por los militares. Entre los principales puntos de la pedagogía scout está la importancia de la educación física en el desarrollo del ser humano como parte integrante de su educación. Precisamente, la educación física y su extensión en Canarias deben mucho al escultismo. En el presente artículo trataremos de determinar los orígenes de la asociación en las islas, con especial incidencia en el consejo local de la ciudad de Las Palmas de Gran Canaria, así como la trascendencia que tuvo en la juventud la incorporación de la educación física como parte de la educación general.One of the most important youth movements in the history of education has been the Boy Scouts. Founded in 1907 by General Baden Powell, whose aim was to improve the social conditions of the English youth. The wide- ranging scope of the scout’s association developed rapidly across the globe. In Spain, as in the Canary Islands, it was started in 1912 by the military. Its main educational functions include physical education in developing the personal growth of human beings as an integral part of their overall education. Indeed, physical education and its development in the Canary Islands owe much to the scout movement. In the present paper we will explore the origins of the association in the islands, with emphasis on the local council in Las Palmas de Gran Canaria.

  15. EVOLUCIÓN DE LA MORTALIDAD ATRIBUIBLE AL TABACO EN LAS ISLAS CANARIAS (1975-1994

    Directory of Open Access Journals (Sweden)

    Luis M Bello Luján

    2001-01-01

    Full Text Available Fundamento: El objetivo de este trabajo es describir la mortalidad atribuible al consumo de tabaco en las Islas Canarias durante el período 1975-1994. Método: Las defunciones por edad, sexo y causa desde 1975 a 1994 se obtuvieron del Instituto Nacional de Estadística (Movimiento Natural Población. A partir de las Encuestas de Salud de España y Canarias se tomaron los porcentajes de nunca fumadores, fumadores y ex-fumadores de la población canaria por edad y sexo. Los riesgos relativos de muerte se obtuvieron del Cancer Prevention Study II, llevado a cabo en Estados Unidos de América. Se calculó la proporción de muertes atribuibles al tabaco para cada año, sexo y grupo de edad a partir de la fracción atribuible poblacional. Así mismo, se calculó la tendencia de la mortalidad atribuible para dicho período expresada como el cambio porcentual medio anual de las tasas de la mortalidad ajustadas por edad, mediante un modelo log-lineal. Resultados: Durante el período 1975-1994, el número de fallecimientos atribuidos al tabaco aumentó un 64%. Por grandes causas, se observó en el período de estudio, un aumento de las neoplasias del 108%, una disminución de las enfermedades cardiovasculares del 32% y un incremento de las enfermedades respiratorias del 15,5%. Se observó también que el número de fallecidos aumenta con la edad, siendo el grupo de edad de 65 años y más en el que se presentan más muertes por el tabaco. Conclusiones: En las Islas Canarias, más del 20% de todas las muertes en 1994 se pueden atribuir al tabaco. Esto sugiere que las medidas introducidas para controlar el tabaquismo son insuficientes.

  16. Arabismos saharianos (alforma, alformaje, alformar) en el español de Canarias

    OpenAIRE

    Frago Gracia, Juan Antonio

    1997-01-01

    Este artículo demuestra que, mientras con más fuerza se mantuvieron las relaciones de toda índole entre Canarias y el África sahariana, las hablas insulares, o al menos algunos de sus usuarios, conocieron el empleo del arabismo alforma junto a sus derivados alformar 'dar salvoconducto, asegurar', alformar 'garante de un salvoconducto o seguro', alformaje 'salvoconducto, seguro'. Este grupo de palabras constituye el puntual reflejo de un capítulo de la historia de los canarios, y por ende de s...

  17. The helminth community of the skink Chalcides sexlineatus from Gran Canaria (Canary Islands).

    Science.gov (United States)

    Roca, V; Carretero, M A; Jorge, F; Perera, A; Ferrero, A; Rodríguez-Reina, S

    2012-06-01

    A survey of the gastrointestinal helminth communities of a population of Chalcides sexlineatus Steindachner, a small skink endemic to Gran Canaria island (Canary Archipelago, Spain), was conducted to determine the prevalence, abundance and species diversity of intestinal parasites in these reptiles. Only three parasite species were found, one cestode, Oochoristica agamae Baylis, 1919 and two nematodes, Parapharyngodon micipsae (Seurat, 1917) and Pharyngodonidae gen. sp. Helminth infracommunities of C. sexlineatus showed low values of abundance and species richness and diversity, being more similar to the helminth community of Tarentola boettgeri boettgeri (Steindachner) rather than those of Gallotia stehlini (Schenkel), both syntopic with the sampled host.

  18. Canarias triunfante: la plasmación de la imagen a través del mito

    Directory of Open Access Journals (Sweden)

    Jonás Armas Núñez

    2013-01-01

    Full Text Available La obtención de la capitalidad de la Provincia de Canarias por parte de Santa Cruz de Tenerife en el siglo XIX llevó implícita la necesidad de mostrar en la urbe las ideas de poder y progreso. La erección de nuevos edificios representativos y el empuje de la nueva y pujante clase social, la burguesía, crearon en Santa Cruz de Tenerife suntuosos escaparates de la imagen del poder de la capital, entre los que destaca el palacio de la Capitanía General de Canarias, y en especial su singular Salón del Trono.

  19. ESTILO DE VIDA Y ADHERENCIA AL TRATAMIENTO DE LA POBLACIÓN CANARIA CON DIABETES MELLITUS TIPO 2

    OpenAIRE

    Antonio Cabrera de León; José Carlos del Castillo Rodríguez; Santiago Domínguez Coello; María del Cristo Rodríguez Pérez; Buenaventura Brito Díaz; Carlos Borges Álamo; Lourdes Carrillo Fernández; Delia Almeida González; José Juan Alemán Sánchez; Ana González Hernández; Armando Aguirre-Jaime

    2009-01-01

    Fundamento: la población canaria sufre la mayor mortalidad por diabetes tipo 2 (DM2) en España. El objetivo de este estudio es conocer el estilo de vida de las personas diabéticas del archipiélago y su adherencia al tratamiento, así como la DM2 desconocida. Métodos: estudio transversal de 6.729 personas de la población general participantes en la cohorte "CDC de Canarias" (edad 18-75 años). Se obtuvieron sus antecedentes médicos, dieta, actividad física, medicamentos consumidos, tabaco, etc. ...

  20. Presentación de la cohorte "CDC de Canarias": objetivos, diseño y resultados preliminares

    OpenAIRE

    Cabrera de León, Antonio; Rodríguez Pérez, Mª del Cristo; Almeida González, Delia; Domínguez Coello, Santiago; Aguirre Jaime, Armando; Brito Díaz, Buenaventura; González Hernández, Ana; Pérez Méndez, Lina I.

    2008-01-01

    Fundamento: Canarias ocupa el primer lugar de España en mortalidad por cardiopatía isquémica y por diabetes. Sus mujeres son las primeras en mortalidad por cáncer de mama. El "CDC de Canarias" es el estudio de una cohorte de población general para analizar la prevalencia e incidencia de estas enfermedades y la exposición a sus factores de riesgo (FR) en la población adulta del archipiélago. Métodos: Estudio prospectivo con muestreo aleatorio en población general, en el que participaron 6.729 ...

  1. El Confital (Gran Canaria: una prospección etnográfica

    Directory of Open Access Journals (Sweden)

    Paulo González

    2004-01-01

    Full Text Available Este trabajo forma parte de un proyecto de investigación sobre movimientos sociales en las Islas Canarias aun en realización. Desde una perspectiva política y relacional indaga en el proceso de desalojo que se encuentran viviendo algunos grupos categorizados como poblaciones marginales de la ciudad de Las Palmas de Gran Canaria. El desplazamiento y reubicación de los grupos estigmatizados es derivado de las actividades especulativas relacionadas con elementos macrosociales como es el turismo, factor preponderante en la economía del archipiélago. De esta forma este estudio analiza las relaciones de poder articulando las representaciones sociales de los grupos con los discursos y prácticas de los mismos. Así mismo, el estudio diacrónico permite reconstruir las trayectorias sociales de los individuos y del barrio como miembro social activo, más concretamente en las movilizaciones sociales que éste ha generado. Este es un estudio etnográfico que implementa técnicas combinadas de entrevistas semidirigidas y observación participante.

  2. Hacia un producto integral: campaña promocional de Canarias durante los JJ.OO. de 1996

    Directory of Open Access Journals (Sweden)

    Lic. María A. Gabino Campos

    2002-01-01

    Full Text Available Los JJ.OO. de Atlanta en 1996 fueron el marco elegido por la Consejería de Turismo y Transporte del Gobierno de Canarias para introducir la marca "Canarias" en EE.UU. La ambiciosa campaña promocional se llevó a cabo desde el 18 de junio al 5 de agosto de 1996, para lo cual se instaló un pabellón promocional en el centro de la ciudad de Atlanta. Asimismo se aprovechó el viaje a Atlanta, para visitar Augusta y vender las islas como un lugar ideal para practicar golf. En esta ocasión, el Gobierno de Canarias vende el archipiélago como una única marca, "Canarias", con siete destinos. A la oferta tradicional de sol y playa se le une la historia, la cultura, la gastronomía, los deportes náuticos, la sanidad e incluso las ventajas fiscales de las islas. Por primera vez, el archipiélago se da a conocer con todas sus peculiaridades.Canarias no sólo realiza una campaña en solitario, fuera de las promociones tradicionales de ferias o impactos publicitarios, en un mercado arriesgado, sino que cambia sus ya experimentadas estrategias en el mercado europeo por una iniciativa novedosa, con el objeto de atraer nuevos inversores turísticos que sondean novedosos destinos y a empresarios en busca de lugares con regímenes fiscales especiales para instalar sus empresas.

  3. [Characterization of the atmospheric environment in Las Palmas de Gran Canaria and Santa Cruz de Tenerife, Spain: 2000-2004].

    Science.gov (United States)

    López Villarrubia, Elena; García Pérez, M Dolores; Peral Pérez, Nieves; Ballester Díez, Ferrán; Iñiguez Fernández, Carmen; Pita Toledo, M Luisa

    2008-01-01

    The island factor in the cities of Las Palmas de Gran Canaria and Santa Cruz de Tenerife, their meteorology and the proximity to the African Continent that originates the natural particulate matter transport over the islands, cause some specific features in their air quality. The aim of this paper is to characterize the air pollution from 2000 to 2004 as exposure indicator of both cities inhabitants. 24 hour daily average variables of PM10, PM2,5, NO2, SO2 and O3 , 8 hours daily maxima moving averages of O3 y CO and 1 hour maxima of SO2, NO2, O3, CO, PM10 y PM2,5 were calculated. Daily levels of coarse particles were obtained subtracting PM2,5 from PM10. African dust events were identified. In Sta. Cruz de Tf daily means of SO2 (14.0 microg/m(3)N) and ozone levels (44.4 microg/m(3)N ) were higher than Las Palmas de GC levels (8.0 y 28.3 microg/m(3)N). Daily means of NO2 in Las Palmas de GC: 45.8 microg/m(3)N where higher than Sta. Cruz de Tf levels: 30.3 microg/m(3)N. Due to African dust outbreaks, some days in both cities exceeded 600 microg/m(3) of PM10 and 200 of PM2.5 24-h average. The air quality patterns were characterized by very high levels of African dust outbreaks that affect all PM size fractions. Different O3 seasonality exists respect European cities in addition to an urban-industrial ambient air in Sta. Cruz de TF and clearly urban in Las Palmas de GC. These results have to be considered in order to lay the foundations to suitable surveillance systems, analyse the potential impact on the Canary Islands citizens health and to get conclusions.

  4. Determinantes de la demanda de turismo vacacional en las Islas Canarias

    Directory of Open Access Journals (Sweden)

    Santiago Rodríguez Feijoó

    2003-01-01

    Full Text Available En este trabajo se estima una función de demanda de turismo por motivos vacacionales en el destino turístico de las Islas Canarias. El objetivo del estudio es identificar las características relevantes de dicha función y cuantificar sus efectos, no sólo sobre la cantidad demandada (duración de la estancia, sino también sobre los ingresos brutos generados por el turismo, ya que, tanto desde el punto de vista de las empresas que prestan sus servicios en este sector, como de las instituciones públicas encargadas de su planificación y control, la variable que mide los resultados económicos de la actividad es la variable ingresos, más que la propia cantidad de demanda realizada.

  5. Desarrollo urbano e inundaciones en la ciudad de las Palmas de Gran Canaria(1869-2000

    Directory of Open Access Journals (Sweden)

    Pablo Máyer Suárez

    2002-01-01

    Full Text Available En la ciudad de Las Palmas de Gran Canaria los episodios de lluvia facilitan la manifes-tación de riesgos geomorfológicos. El de las inundaciones constituye uno de los más impor-tantes y ha estado presente desde los orígenes de esta ciudad. Las peculiares característicasdel medio físico, tanto desde el punto de vista topográfico como desde el geológico-geomor-fológico; las distintas formas de ocupación del espacio, con áreas de crecimiento planificadasy otras de crecimiento espontáneo, y las diversas intervenciones en áreas consolidadas, quepotencian o agravan estas inundaciones, hacen de esta ciudad una amalgama en la que el aná-lisis de las causas de las inundaciones resulta un proceso complejo

  6. El cólera en Canarias (1851: su tratamiento en prensa

    Directory of Open Access Journals (Sweden)

    Lic. Gabriel Díaz Mora

    1998-01-01

    Full Text Available El cólera, también llamado "cólera morbo" -ambos términos se usan en los periódicos estudiados- es una enfermedad aguda y contagiosa, que se manifiesta por superaciones acuosas, retortijones, vómitos, calambres musculares, supresión de la orina y colapso. La causa el bacilo vibrión de Koch cuando infesta el agua potable. Normalmente causa la muerte por convulsiones, colapso y congestión pulmonar.Esta enfermedad se produce principalmente en los trópicos, pero ha aparecido en todas las partes del mundo, llevada por el hombre en sus viajes. Esto ha justificado numerosas veces la cuarentena, como observamos en la epidemia canaria de 1851.

  7. Rasgos sedimentológicos de los fondos marinos de Maspalomas (Gran Canaria

    Directory of Open Access Journals (Sweden)

    Constatino Criado Hernández

    2013-11-01

    Full Text Available En el transcurso de Ia expedición oceanográfica 132/2 del ES Poseidón dirigida por el profesor Dr. H. Klug (Grographisches Institut der Universitat Kiel, Alemania, se realizo un muestreo de los sedimentos superficiales en la plataforma continental comprendida entre la Playa de San Agustin y la Playa la Mujer. Se presentan aquí los resultados de los análisis granulométricos y carbométricos obtenidos sobre las muestras recogidas.During the oceanographical survey 132/2 (ES Poseidón leadered by the Dr. H. Klug (Grographisches Institut der Universitat Kiel, Germany were sampled surficial sediments from the continental shelf of Gran Canaria, between Playa San Agustín and Playa de la Mujer. We present the results of grain size and carbonate analysis got from the samples.

  8. Marrero Regalado y Aguiar: El arte masónico oficial de la Postguerra en Canarias

    Directory of Open Access Journals (Sweden)

    David Martín López

    2008-12-01

    Full Text Available La masonería, como institución filantrópica y bien asentada durante la II República en España, fue totalmente rechazada por Franco desde su Alzamiento de 1936. Sin embargo, la protección oficial de la masonería en Canarias hizo que artistas masones como José Aguiar o como el arquitecto Marrero Regalado pudieran materializar su estética en numerosos proyectos para un nuevo Estado, en el que la concepción masónica del Ser Humano aparece como lenguaje encubierto y subversivo.

  9. Emigración y actividad empresarial canaria en Cuba, 1850-1950

    Directory of Open Access Journals (Sweden)

    Miguel Suárez Bosa

    2013-09-01

    Full Text Available Los emprendedores canarios contribuyeron a la construcción del tejido empresarial cubano mediante la creación y desarrollo de una gran variedad de empresas: pequeños propietarios agrícolas del tabaco, comerciantes internacionales, titanes del sector financiero y propietarios de centrales azucareros; otros terminaron especializándose en pequeñas empresas de servicios urbanos como la distribución de leche. En este artículo se analizan, en primer lugar, las migraciones canarias en el contexto de las cadenas migratorias atlánticas; en segundo lugar, se exponen los aspectos más importantes del desarrollo empresarial protagonizado por los emigrantes isleños en Cuba.

  10. The commissioning instrument for the Gran Telescopio Canarias: made in Mexico

    Science.gov (United States)

    Cuevas, Salvador; Sánchez, Beatriz; Bringas, Vicente; Espejo, Carlos; Flores, Rubén; Chapa, Oscar; Lara, Gerardo; Chavoya, Armando; Anguiano, Gustavo; Arciniega, Sadot; Dorantes, Ariel; Gonzalez, José L.; Montoya, Juan M.; Toral, Rafael; Hernández, Hugo; Nava, Roberto; Devaney, Nicolas; Castro, Javier; Cavaller, Luis; Farah, Alejandro; Godoy, Javier; Cobos, Francisco; Tejada, Carlos; Garfias, Fernando

    2006-02-01

    In March 2004 was accepted in the site of Gran Telescopio Canarias (GTC) in La Palma Island, Spain, the Commissioning Instrument (CI) for the GTC. During the GTC integration phase, the CI will be a diagnostic tool for performance verification. The CI features four operation modes-imaging, pupil imaging, Curvature Wave-front sensing (WFS), and high resolution Shack-Hartmann WFS. This instrument was built by the Instituto de Astronomia UNAM in Mexico City and the Centro de Ingenieria y Desarrollo Industrial (CIDESI) in Queretaro, Qro under a GRANTECAN contract after an international public bid. Some optical components were built by Centro de Investigaciones en Optica (CIO) in Leon Gto and the biggest mechanical parts were manufactured by Vatech in Morelia Mich. In this paper we made a general description of the CI and we relate how this instrument, build under international standards, was entirely made in Mexico.

  11. Violence in paradise: Cranial trauma in the prehispanic population of Gran Canaria (Canary Islands).

    Science.gov (United States)

    Delgado-Darias, Teresa; Alberto-Barroso, Verónica; Velasco-Vázquez, Javier

    2018-05-01

    This paper addresses the prevalence and pattern of physical violence in the prehispanic society of Gran Canaria and discusses its link with the social structure and insular context in which that people lived. 347 prehispanic crania from Guayadeque Ravine (575-1415 AD) have been examined in order to determine the frequency, types, location, and timing of trauma. Craniofacial injuries are present in 27.4% of the crania examined. Only 2% display perimortem trauma. Most of the injuries (84.3%) correspond to depressed blunt force trauma, with an ellipsoidal or circular shape. Most of these are in the anterior aspect of the cranium. Males are significantly more affected than females. The aboriginal population of Gran Canaria show a high frequency of traumatic injuries to the skull compared to other archaeological groups. Their frequent location in the anterior aspect suggests regular face-to-face confrontations. However, the lethal injuries typically occurring in large-scale combat are scarce. Practices such as ritualized combat, mentioned in ethnohistorical sources, would help to channel and mitigate inter-group conflict. The predominance of depressed blunt force trauma is in accordance with the weapons used by those populations: hand-thrown stones, clubs and sticks. The higher frequency in males indicates that they took part in direct violence more than females did. The hierarchical organization of their society may have led to frequent situations of conflict. The insular nature of a territory barely 1,500 m 2 in size was a determining factor in competition for access to food resources, especially at times of climate crises or population growth. © 2018 Wiley Periodicals, Inc.

  12. Una mirada retrospectiva desde el museo escuela del CEP Las Palmas de Gran Canaria. // A retrospective look at the school museum of the CEP Las Palmas de Gran Canaria.

    Directory of Open Access Journals (Sweden)

    Antonio S. Almeida Aguiar

    2013-12-01

    Full Text Available (ES El Museo Escuela del Centro de Profesores, se encuentra en las Palmas de Gran Canaria cuyo nombre toma el centro perteneciente a la red de Centros del Profesorado del Gobierno de Canarias. Este espacio recrea tal como era una clase de la época de Franco con materiales, libros y muebles cedidos por diferentes escuelas en su mayoría rurales. También se proyecta un video con imágenes y fotos de escuelas desde 1920 hasta 1970, y costumbre canarias de los CER. Herramienta pedagógica que, en un principio, se puso a disposición del alumnado y profesorado de ámbito no universitario para el estudio e investigación de nuestra Historia de la Educación, mediante la exposición material, documental y testimonial. // (EN The school museum is in the Teacher Training Centre in Las Palmas of Gran Canaria. This institution belongs to the Canary Islands Government’s Teacher Training Centre net. This space shows us how it was a classroom during Franco’s government: with materials, books and furniture that were given up from different schools, most of them rural schools. Also, there is a video projection with pictures in it of schools from 1920 to 1970 and the customs of the CER (Rural Education Centers in the Canary Islands. In the beginning this pedagogical tool was available for students and teachers who did not belong to the university environment. Its objective was the study and research of the history of education by documentary, material and testimonial exhibition.

  13. La utilización diferencial del espacio urbano en el sector de Arenales. Las Palmas de Gran Canaria

    Directory of Open Access Journals (Sweden)

    Silvia Sobral García

    2013-11-01

    Full Text Available En este artículo se aborda el análisis de los usos urbanos registrados en el barrio de Arenales, uno de los sectores más representativos de la ciudad de Las Palmas de Gran Canaria. En este sentido, se ofrece un ejemplo de cómo utilizar de forma más racional el suelo,  de acuerdo a las características morfológicas y urbanas del área y al papel que juega dentro de la ciudad.This article deals with the analysis of the urban uses in the area of Arenales which is one of the most representative districts in the city of Las Palmas de Gran Canaria and it seeks to suggest a more rational land use according to the morphologic and urban features of the area in question and to the role it plays in this town.

  14. Turismo y gestión cultural en las Islas Canarias: apuntes para una reflexión

    Directory of Open Access Journals (Sweden)

    Beatriz Martín de la Rosa

    2003-01-01

    Full Text Available Las Islas Canarias constituyen un claro ejemplo de región que debe su nivel de desarrollo a la actividad turística. La andadura turística se inicia en la década de los sesenta, vinculada al modelo turístico de la época, el turismo de masas asociado a sol y playa (materias primas abundantes. Desde entonces hasta ahora han transcurrido bastantes cambios. En la actualidad intenta complementar su oferta turística ofreciendo turismo rural (por utilizar un nombre genérico y también, aunque menos desarrollado, turismo cultural. Plantear algunas reflexiones sobre el turismo cultural en Canarias, en especial las dificultades derivadas de su gestión, es el objetivo de este artículo

  15. Primeros resultados para la reconstrucción dendroclimática de Canarias

    Directory of Open Access Journals (Sweden)

    Carlos L. Santana Jubells

    2013-11-01

    Full Text Available La aplicación de la Dendrocronología a poblaciones canarias de Pinus canariensis Smith, taxón que hasta el momento no había sido objetivo de esta ciencia, y la obtención de los primeros resultados positivos en la comparación cruzada de series de crecimiento, abren las puertas a una reconstrucción de las variables climáticas precipitación y temperatura del pasado en el Archipiélago. Entre las muchas aplicaciones que es posible derivar de dicha reconstrucción, centra el interés de la Prehistoria el conocimiento, desde una perspectiva diacrónica, de una parte fundamental del entorno ecológico en el que se desarrollan de las poblaciones pehispánicas de Canarias, como vía válida para enriquecer la interpretación de ciertas transformaciones culturales. Los cambios que se operan en la isla de La Palma en el tránsito entre las fases cerámica III y IV, pueden ser interpretados como claro exponente de la intima relación que existe entre el desarrollo de los sistemas culturales y las alteraciones de su marco medioambiental.The application of Dendrochronology to populations of Pinus canariensis Smith from the Canary Islands -species never studied by this science before- and the first positive results in cross-dating of tree-ring series, are achievements that lead to the future reconstruction of the past climatic variables precipitations and temperatures in the Canaries. Among the many applications derived from this climatic reconstruction, the knowledge from a dicahronic perspective if a fundamental piece of the ecological environment in wich the Canarian prehispanic peoples developed will provide Prehistory with a powerful tool to enrich the interpretation of certain cultural phenomena. The changes that took place in La Palma in the transition between the ceramic phases II and IV, can be interpreted as a clear example of the close relationship existing between development of cultural systems and modifications in its environmental frame.

  16. Los Laparocerus Schoenherr, 1834 de las Canarias orientales, islas Salvajes y Marruecos (Coleoptera, Curculionidae, Entiminae

    Directory of Open Access Journals (Sweden)

    Machado, A.

    2011-12-01

    Full Text Available This contribution to the knowledge of the genus Laparocerus Schoenherr, 1834 in Macaronesia concerns species from the Eastern Canaries, Salvage Islands and Morocco. Laparocerus rasus Wollaston, 1864 is redescribed and two new subspecies localised in Fuerteventura are ascribed to it: L. rasus betancor n. spp. and L. rasus jandiensis n. ssp. Several new species are described from that same island: L. maxorata n. sp., L. colonnellii n. sp., L. calvus n. sp., L. xericola n. sp., L. fraterculus n. sp., and L. longipennis n. sp.; from the island of Lanzarote L. curvipes famara n. ssp., and from the Selvage Islands L. garretai albosquamosus n. spp. The only confirmed species form Morocco, Laparocerus susicus (Escalera, 1914, is redescribed and L. susicus montanus n. spp., from the interior, and L. susicus inexpectatus nov. nom., from the coastal region of Tiznit are assigned to it. A retro-colonization from the Canary Islands to the continent is hypothesized for this Moroccan species. Doubtful records and unresolved species are commented on, and keys in Spanish and English for identifying all Laparocerus inhabiting this geographical context are provided.Esta contribución al conocimiento del género Laparocerus Schoenherr, 1834 está dedicada a las Canarias orientales, islas Salvajes y Marruecos. Se redescribe Laparocerus rasus Wollaston, 1864 y se le asignan dos nuevas subespecies localizadas en Fuerteventura: L. rasus betancor n. spp. y L. rasus jandiensis n. ssp. De esta misma isla se describen varias especies nuevas: L. maxorata n. sp., L. colonnellii n. sp., L. calvus, n. sp., L. xericola n. sp., L. fraterculus n. sp. y L. longipennis n. sp.; de la isla de Lanzarote L. curvipes famara n. ssp., y de las islas Salvajes L. garretai albosquamosus n. spp. Se redescribe la única especie confirmada de Marruecos, Laparocerus susicus (Escalera, 1914, a la que se adscriben L. susicus montanus n. spp., del interior, y L. susicus inexpectatus nom. nov., de

  17. Turismo y administración local en Canarias: un problema pendiente. Bases para un debate

    Directory of Open Access Journals (Sweden)

    Juan Israel García Cruz

    2014-02-01

    Full Text Available Las administraciones locales deben gestionar una parte importante de las infraestructuras y serviciosdemandados por el turismo. En estas áreas se combina la prestación de servicios a la población turísticay población local, lo que supone su redimensionamiento y diversificación. Como resultado, los municipiosafectados por esta dualidad deben adaptar la gestión de sus recursos, produciéndose importantesdesequilibrios.Esta distinción ha abierto un importante debate en torno a la figura del «municipio turístico» y su«discriminación positiva» frente al resto de municipios. Una fórmula que trata de compensar el desequilibrioque genera la actividad turística en la gestión local. Actualmente las islas Canarias carecende criterios oficiales para la definición de un municipio turístico, así como no se ha consensuado unlistado oficial que los identifique. En este sentido, el presente artículo pretende hacer algunas aportacionesa este debate, planteando una propuesta de delimitación.

  18. Contrasting recruitment seasonality of sea urchin species in Gran Canaria, Canary Islands (eastern Atlantic

    Directory of Open Access Journals (Sweden)

    S. GARCIA-SANZ

    2014-03-01

    Full Text Available Despite sea-urchins can play an important role affecting the community structure of subtidal bottoms, factors controlling the dynamics of sea-urchin populations are still poorly understood. We assessed the seasonal variation in recruitment of three sea-urchin species (Diadema africanum, Paracentrotus lividus and Arbacia lixula at Gran Canaria Island (eastern Atlantic via monthly deployment of artificial collectors throughout an entire annual cycle on each of four adjacent habitat patches (seagrasses, sandy patches, ‘urchin-grazed’ barrens and macroalgal-dominated beds within a shallow coastal landscape. Paracentrotus lividus and A. lixula had exclusively one main recruitment peak in late winter-spring. Diadema africanum recruitment was also seasonal, but recruits appeared in late summer-autumn, particularly on ‘urchin-grazed’ barrens with large abundances of adult conspecifics. In conclusion, this study has demonstrated non-overlapping seasonal recruitment patterns of the less abundant species (P. lividus and A. lixula with the most conspicuous species (D. africanum in the study area.

  19. Early Pliocene fishes (Chondrichthyes, Osteichthyes) from Gran Canaria and Fuerteventura (Canary Islands, Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Betancort, J.F.; Lomoschitz, A.; Meco, J.

    2016-07-01

    Fossil fish teeth are contained in marine deposits dated at ca 4.8 Ma found on the islands of Gran Canaria and Fuerteventura (Canary Islands, Spain). These islands, situated in the North Atlantic Subtropical Gyre, can be considered a mid-way stopover point between the Caribbean Sea, with the Central American Seaway about to close in this epoch, and the Mediterranean, in the first stage of its post-Messinian Gibraltar Seaway period. Accordingly, there existed extensive pantropical communication, particularly for nektonic animals capable of travelling large distances. In this paper, we present a number of fossil fishes, most of which are identified for the first time on the basis of their teeth: the Chondrichthyes species Carcharocles megalodon, Parotodus benedeni, Cosmopolitodus hastalis, Isurus oxyrinchus, Carcharias cf. acutissima, Carcharhinus cf. leucas, Carcharhinus cf. priscus, Galeocerdo cf. aduncus, and the Osteichthyes species Archosargus cinctus, Labrodon pavimentatum, and Diodon scillae. Coincidences are observed between these ichthyofauna and specimens found in the Azores Islands, the Pacific coast of America and the Mediterranean Sea. (Author)

  20. El abastecimiento de pescado fresco en Las Palmas de Gran Canaria a fines del siglo XVIII

    Directory of Open Access Journals (Sweden)

    Antonio de BETHENCOURT MASSIEU

    2009-12-01

    Full Text Available En el transcurso del setecientos, particularmente en su segunda mitad, cruza sobre España, al igual que sobre el resto de Occidente, una polémica sobre las ventajas que reportaría la libertad de precio de los productos —su valor regulado por la ley de oferta y la demanda—, motor del desarrollo económico.No es ahora mi objeto detenerme en el análisis de la penetración de las doctrinas fisiocráticas y del librecambismo smithsoniano. Mi interés se reduce a cosa mucho más simple. Mostrar como también la polémica alcanzó a Canarias. Veremos la lucha que sostuvo la Real Sociedad Económica de Amigos del País de Las Palmas en pro de la abolición de la tasa del pescado fresco que consumía la población.

  1. Early Pliocene fishes (Chondrichthyes, Osteichthyes from Gran Canaria and Fuerteventura (Canary Islands, Spain

    Directory of Open Access Journals (Sweden)

    J. F. Betancort

    2016-11-01

    Full Text Available Fossil fish teeth are contained in marine deposits dated at ca 4.8 Ma found on the islands of Gran Canaria and Fuerteventura (Canary Islands, Spain. These islands, situated in the North Atlantic Subtropical Gyre, can be considered a mid-way stopover point between the Caribbean Sea, with the Central American Seaway about to close in this epoch, and the Mediterranean, in the first stage of its post-Messinian Gibraltar Seaway period. Accordingly, there existed extensive pantropical communication, particularly for nektonic animals capable of travelling large distances. In this paper, we present a number of fossil fishes, most of which are identified for the first time on the basis of their teeth: the Chondrichthyes species Carcharocles megalodon, Parotodus benedeni, Cosmopolitodus hastalis, Isurus oxyrinchus, Carcharias cf. acutissima, Carcharhinus cf. leucas, Carcharhinus cf. priscus, Galeocerdo cf. aduncus, and the Osteichthyes species Archosargus cinctus, Labrodon pavimentatum, and Diodon scillae. Coincidences are observed between these ichthyofauna and specimens found in the Azores Islands, the Pacific coast of America and the Mediterranean Sea.

  2. [Presentation of the "CDC de Canarias" cohort: objectives, design and preliminary results].

    Science.gov (United States)

    Cabrera de León, Antonio; Rodríguez Pérez, Ma del Cristo; Almeida González, Delia; Domínguez Coello, Santiago; Aguirre Jaime, Armando; Brito Díaz, Buenaventura; González Hernández, Ana; Pérez Méndez, Lina I

    2008-01-01

    The Canary Islands rank first in Spain with respect to the ischaemic heart disease and diabetes mortality rates. The Islands female population leads the country in deaths from breast cancer. The "CDC de Canarias" is a general population cohort study in order to analyse the prevalence and incidence of these diseases and the exposure to their risk factors (RF) in the adult population of the archipelago. Prospective study with a random sampling of the general population, in which 6,729 individuals participated between 2000 and 2005 (aged 18-75). Anthropometric measurements were taken, and blood was drawn for the storage of serum and genetic samples. The following information was gathered through a questionnaire: eating habits, physical activity, personal and family medical history, exposure to occupational or environmental risk factors, smoking, etc. The prevalence of obesity is close to 30%, without differences between sexes, however, more male subjects were overweight than women (45 vs. 33%; p high blood pressure (43 vs. 33%; p high prevalence of exposure to risk factors for cardiovascular disease, diabetes and cancer, among which overweight, obesity and lack of exercise stand out particularly.

  3. Photoinhibition in common atlantic macroalgae measured on site in Gran Canaria

    Science.gov (United States)

    Häder, D.-P.; Porst, M.; Lebert, M.

    2001-03-01

    The photosynthetic quantum yield was analysed in four common atlantic macroalgae, the Rhodophytes Gelidium arbuscula and Halopithys incurvus and the Phaeophytes Halopteris scoparia and Lobophora variegata in Gran Canaria, Canary Islands at their growth site. The fluorescence parameters were measured using a portable pulse amplitude modulated (PAM) fluorometer (PAM 2000) instrument and a diving PAM under water without removing the thalli from their growth sites. Solar radiation was monitored continuously above and under water during the whole experimental period using two three-channel dosimeters (European light dosimeter network; ELDONET) (Real Time Computer, Möhrendorf, Germany). These instruments measure solar radiation in three wavelength ranges, ultraviolet (UV)-A, UV-B and photosynthetic active radiation (PAR). In all four algae the effective photosynthetic quantum yield decreased significantly from the optimal values measured after dark adaptation due to exposure to 15 min solar radiation, but at least partially recovered subsequently in the shade within several hours. Increasing the exposure period to 30 min intensified the photoinhibition. In some algae no recovery was observed after this treatment and in others no significant recovery could be detected. Exposure to unfiltered solar radiation caused a significantly higher photoinhibition than PAR-only radiation or PAR plus UV-A. A substantial inhibition was found in all algae at their growth sites in the water column when the sun was at high angles, as measured with the diving PAM.

  4. Massive decline of Cystoseira abies-marina forests in Gran Canaria Island (Canary Islands, eastern Atlantic

    Directory of Open Access Journals (Sweden)

    José Valdazo

    2017-12-01

    Full Text Available Brown macroalgae within the genus Cystoseira are some of the most relevant “ecosystem-engineers” found throughout the Mediterranean and the adjacent Atlantic coasts. Cystoseira-dominated assemblages are sensitive to anthropogenic pressures, and historical declines have been reported from some regions. In particular, Cystoseira abies-marina, thriving on shallow rocky shores, is a key species for the ecosystems of the Canary Islands. In this work, we analyse changes in the distribution and extension of C. abies-marina in the last decades on the island of Gran Canaria. This alga dominated the shallow rocky shores of the entire island in the 1980s; a continuous belt extended along 120.5 km of the coastline and occupied 928 ha. In the first decade of the 21st century, fragmented populations were found along 52.2 km of the coastline and occupied 12.6 ha. Today, this species is found along 37.8 km of the coastline and occupies only 7.4 ha, mainly as scattered patches. This regression has been drastic around the whole island, even in areas with low anthropogenic pressure; the magnitude of the decline over time and the intensity of local human impacts have not shown a significant correlation. This study highlights a real need to implement conservation and restoration policies for C. abies-marina in this region.

  5. Turismo intervención publica en Canarias: transición del modelo cuantitivo al cuaitativo

    Directory of Open Access Journals (Sweden)

    Ramón Diaz Hernandez

    2008-09-01

    Full Text Available Confronté à une surfréquentation touristique, le Gouvernement local des Îles Canaries a publié un Arrêt (4/2001 qui reformule les Orientations Générales du Territoire et du Tourisme. L’objectif est de s’entendre sur les bases d’un modèle de développement insulaire soutenable, en mettant l’accent sur la gestion des ressources naturelles en général et le tourisme plus particulièrement. Cet Arrêt a été accompagné de normes dont l’objectif est de limiter la construction de nouveaux bâtiments hôteliers. Peu après, le Gouvernement a publié l’Arrêt 126/2001 qui limitait le développement touristique. Le Parlement adopta un autre Arrêt, la «Ley de Medidas Urgentes en Materia de Ordenación del Territorio y del Turismo de Canarias » (juillet 2001 qui détermine les conditions exigées aux établissements hôteliers de plus haute catégorie. Le Parlement donne aussi son accord à l’Arrêt 19/2003, «Directrices de Ordenación General y Directrices de Ordenación del Turismo de Canarias ».     Faced with excesses tourism, the local government of the Canary Islands issued a judgement (4 / 2001, which reformulates General Guidelines of Territory and Tourism. The aim is to set up the basis of a model of sustainable island development, with emphasis on natural resource management in general and tourism in particular. This decision was accompanied by standards whose objective is to limit the construction of new buildings for hotels. Shortly thereafter, the Government issued the ruling 126/2001 which limited the development of tourism. Parliament adopted another decree, "Ley de Medidas Urgent en Materia de Ordenación del Territorio y del Turismo de Canarias" (July 2001 which determines the conditions required for hotels higher category. The Parliament also gives its agreement to stop 19/2003, "Directrices de Ordenación General y Directrices de Ordenación del Turismo de Canarias."El desbordamiento ocasionado por el

  6. Canarias: entre el desarrollo turístico y la protección al medio

    Directory of Open Access Journals (Sweden)

    Tanausú Perez Garcia

    2010-11-01

    on the necessary conditions for sustainable development.Las Islas Canarias, situadas en la región macaronésica, acogen ecosistemas terrestres y marinos de valiosa riqueza ecológica y paisajística, representativos de las áreas culturales y biogeográficas de su entorno; hasta el punto de albergar tres Reservas de la Biosfera reconocidas por la UNESCO. La diversidad y riqueza de este marco insular ya fue elogiada por grandes científicos como Alexander von Humboldt o Charles Darwin. Sin embargo, actualmente la presión ejercida sobre el medio por parte del desarrollo urbanístico y la industria turística, motor económico del archipiélago, pone en peligro estos frágiles ecosistemas; lo que ha generado un profundo debate entre crecimiento económico y turístico, y desarrollo sostenible y conservación. El presente artículo trata, desde una óptica divulgativa, de acercar al lector al medio que caracteriza las Islas Canarias e introducirlo en el marco donde se desarrolla parte importante de la actividad turística en España, uno de los países que más turistas recibe año a año.

  7. Encuesta de portadores de Neisseria meningitidis en el Área de Salud de Gran Canaria

    Directory of Open Access Journals (Sweden)

    García Rojas Amós

    2000-01-01

    Full Text Available FUNDAMENTOS: Se plantea A Conocer la tasa de portadores y los tipos circulantes de Neisseria Meningitidis en la población residente en el área de salud de Gran Canaria. B Conocer el patrón de distribución de estos portadores. MÉTODOS: Se realizó un diseño descriptivo transversal, con un muestreo aleatorio en etapas múltiples y por conglomerados. Se determinó un tamaño muestral mínimo de 707 personas para una prevalencia esperada del 8,6 %, con una confianza del 95,6 % y precisión de 0,02. Asumiendo que un 15 % de las personas no quisieran colaborar, se incrementó el tamaño muestral a 831 personas, distribuidas en cada conglomerado de manera proporcional a la población existente. Este tamaño se distribuyó a su vez, en cuatro grandes grupos de edad y sexo, proporcionalmente a su importancia en cada zona básica de salud seleccionada aleatoriamente. Los individuos de la muestra se identificaban entre los que acudían a las unidades de extracción, y una vez superados los criterios de exclusión se les solicitaba su colaboración voluntaria en el estudio. Si aceptaban, se les cumplimentaba un cuestionario que englobaba diferentes variables de interés epidemiológico y se les realizaba un frotis faríngeo. Al haber seleccionado los equipos de Atención Primaria con muestreo aleatorio simple y seguir el mismo método para elegir los individuos dentro de ellos, la estimación de la prevalencia se realizó mediante estimador no sesgado. RESULTADOS: Se obtuvieron un total de 828 muestras, lo que supuso un 99,6% de las previstas. Salvo tres, todos los individuos seleccionados participaron voluntariamente en el estudio, lo que le confiere una alta representatividad. Todas las cepas obtenidas correspondían a N. Meningitidis Serogrupo B, salvo una identificada como N. Meningitidis Serogrupo C Sero/Subtipo 4:P1.2,5. Las cepas de N. Meningitidis serogrupo B identificadas, correspondían a 25 serosubtipos diferentes. La prevalencia puntual

  8. PROPUESTA DE ITINERARIO GEOTURÍSTICO URBANO EN GARACHICO (TENERIFE, CANARIAS, ESPAÑA

    Directory of Open Access Journals (Sweden)

    Fco. Javier Dóniz-Páez

    2016-01-01

    Full Text Available En los destinos maduros de sol y playa los nuevos productos y experiencias turísticas son una realidad actual y necesaria. El geoturismo urbano es un producto de turismo muy novedoso que consiste en explotar turísticamente el relieve presente dentro de las ciudades tanto en afloramientos naturales como en los diferentes elementos del patrimonio cultural tangible inmueble. El objetivo de este artículo es diseñar y proponer un itinerario de geoturismo urbano con base espacial por el casco histórico de Garachico (Tenerife, Canarias, España, asociado directa e indirectamente con la erupción volcánica de 1706 y que contribuya a diversificar su oferta turística polarizada en sus atractivos históricos. Para ello la metodología utilizada consistió en el inventario, caracterización y valoración del patrimonio geológico-geomorfológico presente en los diferentes geomorfositios y en el patrimonio cultural tangible inmueble del casco histórico de la ciudad. Se seleccionaron catorce recursos naturales y culturales vinculados con la geodiversidad de Garachico. En función de la variedad de recursos inventariados, de las posibilidades que ofrece y de su distribución geográfica, el itinerario propuesto en formato de ruta abierta recorre los catorce atractivos seleccionados a lo largo de unos 2 km de longitud y de tres horas de duración.

  9. Análisis geográfico de las relaciones comerciales exteriores de Canarias

    Directory of Open Access Journals (Sweden)

    Ramón Díaz Hernández

    2013-11-01

    Full Text Available Durante la década de los noventa, el comercio exterior de Canarias empieza a sentir los efectos de la incorporación de España a la Unión Europea (1986. La armonización de los mercados de destino y de origen, a resultas de este hecho, rompe poco a poco con las ventajas comerciales tradicionales de las Islas. Ello supone, a la vez, una mayor vinculación con Europa y un estrechamiento de los intercambios con el resto del Estado Español. No obstante, como resultado de una rica experiencia mercantil, el Archipiélago mantiene aún contactos comerciales con la mayor parte de los países y territorios de todos los continentes. Esa fortaleza patrimonial puede instrumentarse como plataforma de la Unión Europea en las relaciones Norte-Sur, pero también, como polo privilegiado en el comercio Sur-Sur, en la pugna por la expansión de los emergentes mercados del Hemisferio Sur.During the decade of the 1990s, foreign trade with the Canary 1slatids begins to feel the effects of Spain's incorporation into the European Community (1986. However, the coordination between foreign arid domestic markets has had little effect on the traditional commercial advantages of the Canary Islands. This implies, at the same time, a greater link with Europe and an increased exchange relationship with the rest of Spain. Nevertheless, as a result of a prosperous trading experience, the Canarian Archipelago still maintains commercial contacts with most of the countries in the world. This economic strength can be instrumental as a platform for the European Community in its relations between the North and the South. But, also, as a privileged pole in commerce within the South, in the struggle for expansion of the emerging markets in the Southern Hemisphere.

  10. The Plio-Quaternary Volcanic Evolution of Gran Canaria Based on new Unspiked K-Ar ages and Magnetostratigraphy

    Science.gov (United States)

    Guillou, H.; Carracedo, J.; Perez Torrado, F.

    2003-12-01

    The combined use of radioisotopic dating, magnetostratigraphy and field geology is a powerful tool to provide reliable chronological frameworks of volcanic edifices. This approach has been used to investigate the last two stages of the volcanic evolution of Gran Canaria. Fifty samples were dated using the unspiked K-Ar method and had their magnetic polarity measured both in the field and in laboratory. Ages were compared to their stratigraphic positions and magnetic polarities before accepting their validity. The unspiked K-Ar chronology constrains the timing of lateral collapses, eruption rates and the contemporaneity of different volcano-magmatic stages at Gran Canaria. Our new data set modifies significantly the previous chronological framework of Gran Canaria, especially between 4 and 2.8 Ma. Based on these new ages, we can bracket the age of the multiple lateral collapses of the Roque Nublo stratovolcano flanks between 3.5 and 3.1 Ma .This time interval corresponds to a main period of volcanic quiescence. Calculated eruptive rates during the stratovolcano edification are about 0.1 km3/kyr which is significantly lower than the published estimates. The dating also reveals that the two main last stages are not separated by a major time gap, but that the early stages of the rift forming eruption and the vanishing activity of the Roque Nublo strato-volcano were contemporaneous for at least 600 kyrs. These results support that our combined approach provides a rapid first-pass and reliable geochronology. Nevertheless, this chronology can be amplified and made more precise where necessary through detailed Ar-Ar incremental-heating methods. Samples which should be investigated using this method are the oldest and youngest K-Ar dated flows of each volcanic stage, and samples from stratigraphic sections that hold potential to study the behaviour of the earth's magnetic field during reversals (Gauss-Gilbert transition, Olduvai and Reunion events).

  11. Isotopic patterns in silicic ignimbrites and lava flows of the Mogan and lower Fataga Formations, Gran Canaria, Canary Islands

    International Nuclear Information System (INIS)

    Cousens, B.L.; Tilton, G.R.; Spera, F.J.

    1990-01-01

    We report the Sr, Pb, and Nd isotopic composition of thirty-six intercalated extracaldera silicic ignimbrites and basaltic lavas of the Miocene Hogarzales, Mogan, and Fataga Formations, Gran Canaria, Canary Islands. The aims are to constrain petrogenetic models for the silicic volcanics, and determine mantle source characteristics and temporal variations between 14.2 and ≅ 12.1 Ma. Feldspars from the extracaldera silicic ignimbrites are identical in isotopic composition to coeval extracaldera basaltic lavas, supporting a fractional crystallization model for the evolved lavas from parental Hogarzales basalts. 87 Sr/ 86 Sr ratios range from 0.70306 to 0.70341, 206 Pb/ 204 Pb from 19.32 to 19.90, 207 Pb/ 204 Pb from 15.56 to 15.65, and 208 Pb/ 204 Pb from 38.82 to 39.65. 143 Nd/ 144 Nd ratios are nearly constant at 0.512913±15. The source of Gran Canaria magmas is heterogeneous on small scales of both time and distance. Isotope-isotope and isotope-incompatible element plots suggest mixing between well-mixed, slightly enriched mantle (similar to PREMA as defined by Zindler and Hart) and the HIMU mantle component. The proportion of HIMU component (low 87 Sr/ 86 Sr, high 206 Pb/ 204 Pb) increases upsection. Stratigraphic patterns in major, trace element, and isotopic compositions may be explained by the influx of a geochemically distinct ''Fataga'' magma into the Tejeda magma chamber, which mixed with and/or finally completely displaced existing ''Lower Mogan'' magmas. Alternatively, mixing of these two end members could occur in the mantle, prior to injection into the chamber. There is no evidence of lithospheric/asthenospheric contamination in the late-stage shield magmas on Gran Canaria. (orig.)

  12. J0815+4729: A Chemically Primitive Dwarf Star in the Galactic Halo Observed with Gran Telescopio Canarias

    Science.gov (United States)

    Aguado, David S.; González Hernández, Jonay I.; Allende Prieto, Carlos; Rebolo, Rafael

    2018-01-01

    We report the discovery of the carbon-rich hyper metal-poor unevolved star J0815+4729. This dwarf star was selected from SDSS/BOSS as a metal-poor candidate and follow-up spectroscopic observations at medium resolution were obtained with the Intermediate dispersion Spectrograph and Imaging System (ISIS) at William Herschel Telescope and the Optical System for Imaging and low-intermediate-Resolution Integrated Spectroscopy (OSIRIS) at Gran Telescopio de Canarias. We use the FERRE code to derive the main stellar parameters, {T}{eff}=6215+/- 82 K, and {log}g=4.7+/- 0.5, an upper limit to the metallicity of [Fe/H] ≤ ‑5.8, and a carbon abundance of [C/Fe] ≥ +5.0, while [α /{Fe}]=0.4 is assumed. The metallicity upper limit is based on the Ca II K line, which at the resolving power of the OSIRIS spectrograph cannot be resolved from possible interstellar calcium. The star could be the most iron-poor unevolved star known and also be among the ones with the largest overabundances of carbon. High-resolution spectroscopy of J0815+4729 will certainly help to derive other important elemental abundances, possibly providing new fundamental constraints on the early stages of the universe, the formation of the first stars, and the properties of the first supernovae. Based on observations made with the Gran Telescopio Canarias (GTC), installed in the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofísica de Canarias, on the island of La Palma. Program ID GTC90-15B and the Discretionary Director Time GTC03-16ADDT and also based on observations made with the William Herschel Telescope (WHT).

  13. Estudio socioecómico de la reserva de la biosfera de Gran Canaria: propuestas de actuación

    Directory of Open Access Journals (Sweden)

    Silvia Sobral García

    2010-01-01

    Full Text Available En este artículo se aborda el análisis de la Reserva de la Biosfera de la isla de Gran Canaria, espacio de gran valor natural y paisajístico pero afectado de serios problemas económico-demográficos debido al estancamiento poblacional y al proceso de abandono de las actividades tradicionales. Frente a esto se plantean programas centrados en solucionar los principales déficit que afectan a la zona para poder cumplir con los compromisos de desarrollo sostenible que conlleva este reconocimiento internacional.

  14. Evolución de la mortalidad atribuible al tabaco en las Islas Canarias (1975-1994

    Directory of Open Access Journals (Sweden)

    Bello Luján Luis M

    2001-01-01

    Full Text Available Fundamento: El objetivo de este trabajo es describir la mortalidad atribuible al consumo de tabaco en las Islas Canarias durante el periodo 1975-1994. Método: Las defunciones por edad, sexo y causa desde 1975 a 1994 se obtuvieron del Instituto Nacional de Estadística (Movimiento Natural Población. A partir de las Encuestas de Salud de España y Canarias se tomaron los porcentajes de nunca fumadores, fumadores y ex-fumadores de la población canaria por edad y sexo. Los riesgos relativos de muerte se obtuvieron del Cancer Prevention Study II, llevado a cabo en Estados Unidos de América. Se calculó la proporción de muertes atribuibles al tabaco para cada año, sexo y grupo de edad a partir de la fracción atribuible poblacional. Así mismo, se calculó la tendencia de la mortalidad atribuible para dicho periodo expresada como el cambio porcentual medio anual de las tasas de la mortalidad ajustadas por edad, mediante un modelo log-lineal. Resultados: Durante el periodo 1975-1994, el número de fallecimientos atribuidos al tabaco aumentó un 64%. Por grandes causas, se observó en el periodo de estudio, un aumento de las neoplasias del 108%, una disminución de las enfermedades cardiovasculares del 32% y un incremento de las enfermedades respiratorias del 15,5%. Se observó también que el número de fallecidos aumenta con la edad, siendo el grupo de edad de 65 años y más en el que se presentan más muertes por el tabaco. Conclusiones: En las Islas Canarias, más del 20% de todas las muertes en 1994 se pueden atribuir al tabaco. Esto sugiere que las medidas introducidas para controlar el tabaquismo son insuficientes.

  15. Análisis del comportamiento de los viajeros del transporte interurbano en la isla de Gran Canaria

    OpenAIRE

    Cristóbal Betancor, Teresa

    2014-01-01

    Máster Universitario en Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería (SIANI) [ES] En este trabajo se hace uso de técnicas de Inteligencia de Negocio y Minería de Datos para la extracción de conocimiento útil para la empresa concesionaria del servicio de transporte interurbano de la isla de Gran Canaria. El objetivo ha sido encontrar un patrón que permita predecir la cantidad de viajeros que querrán ir de un punto a otro de red de transporte en un momento dado. Para ello se ...

  16. Los orígenes del Instituto provincial de higiene de las Canarias orientales y la sanidad municipal (1926-1927: cambios estructurales y asistenciales

    Directory of Open Access Journals (Sweden)

    Martín del Castillo, Juan Francisco

    2005-12-01

    Full Text Available The «Instituto Provincial de Higiene de las Canarias Orientales» is an example of Estatuto Provincial of José Calvo Sotelo (1925. Involved in administrative affaires and economical distributions between the Townhall of Las Palmas de Gran Canaria and Insular Council, its beginning is labour of Doctor Antonio Ortiz de Landázuri, in that moment Health Inspector. In this paper, be described the structure and functions of Hygiene Institute, so the change of technical members of laboratories and stations of previous town health services.

    El Instituto Provincial de Higiene de las Canarias Orientales es un ejemplo de la puesta en marcha del Estatuto Provincial de José Calvo Sotelo (1925. Envuelto en medidas administrativas y repartos financieros entre el Ayuntamiento de Las Palmas de Gran Canaria y el Cabildo Insular, su inicio es obra directa del doctor Antonio Ortiz de Landázuri, en aquellos momentos al cargo de la Inspección de Sanidad. En el presente, quedan descritos la estructura y funciones del Instituto de Higiene, además del pase de los miembros facultativos de los laboratorios y estaciones de anteriores servicios municipales del ramo.

  17. Un acontecimiento social: deporte y educación física en Las Palmas de Gran Canaria (1844-1914)

    OpenAIRE

    Almeida Aguiar, Antonio S.

    2011-01-01

    Programa de Doctorado: Evaluación y asesoramiento en el desarrollo de la calidad educativa En este trabajo trataremos de acercarnos a las condiciones sociales que hicieron posible la incorporación de la educación física y el deporte a la ciudad de Las Palmas de Gran Canaria.

  18. ESTILO DE VIDA Y ADHERENCIA AL TRATAMIENTO DE LA POBLACIÓN CANARIA CON DIABETES MELLITUS TIPO 2

    Directory of Open Access Journals (Sweden)

    Antonio Cabrera de León

    2009-01-01

    Full Text Available Fundamento: la población canaria sufre la mayor mortalidad por diabetes tipo 2 (DM2 en España. El objetivo de este estudio es conocer el estilo de vida de las personas diabéticas del archipiélago y su adherencia al tratamiento, así como la DM2 desconocida. Métodos: estudio transversal de 6.729 personas de la población general participantes en la cohorte "CDC de Canarias" (edad 18-75 años. Se obtuvieron sus antecedentes médicos, dieta, actividad física, medicamentos consumidos, tabaco, etc. Resultados: la prevalencia de DM2 fue 12% en varones y 10% en mujeres (p=0,005. El 22%de varones y 9% de mujeres desconocían su enfermedad (p<0,001. Sumando DM2 desconocida, DM2 no tratada e incumplimiento terapéutico, el 48% de los hombres y 28% en mujeres no seguían tratamiento correcto. Los varones diabéticos eran más obesos que los no diabéticos (45 versus 25%; p<0,001 pero no presentaban diferencias en tabaquismo (28%; IC95%=23-33 o sedentarismo (62%; IC95%=56-68. Las mujeres diabéticas también eran más obesas (54 versus 27%; p<0,001 y, aunque fumaban menos (11 versus 22%; p<0,001, eran igual de sedentarias (75%; IC95%=70-79. La ingesta calórica era menor en quienes sufrían DM2 (p<0,001, pero el 93% (IC95%=91-95 superaba el consumo recomendado de grasas saturadas y el 69% (IC95%=65-72 padecía síndrome metabólico. Conclusiones: la población diabética en Canarias es sedentaria y obesa, muestra un consumo alto de grasas saturadas y gran prevalencia de síndrome metabólico. El porcentaje que sigue tratamiento regular es muy bajo, sobretodo en varones, que además mantienen el tabaquismo.

  19. Marineros extranjeros en los protocolos notariales de Gran Canaria (1590-1599

    Directory of Open Access Journals (Sweden)

    María Berenice Moreno Florido

    2013-11-01

    Full Text Available Este trabajo de investigación pretende un análisis detallado y riguroso que nos ayude a tener un mayor conocimiento de la sociedad canaria y sobre todo de su relación con el exterior, centrándonos en el Atlántico europeo. De esta manera consideramos que se trata de una aportación más para el entendimiento profundo del Archipiélago canario durante el Antiguo Régimen. En este sentido debemos señalar que no existe un estudio de estas características que relacione la actividad de los marineros extranjeros y su actuación intrínseca con el comercio así como la vida de éstos y su entorno. Por este motivo hemos decidido realizar un análisis que abarque cada uno de los aspectos que podemos entresacar de la fuente empleada, los protocolos notariales. Del mismo modo el periodo escogido, 1590-1599, radica en la influencia de la política filipina en una época llena de hostilidades y decadencia para el Estado español. Así nos hemos centrado en la última etapa del reinado de Felipe II mostrando una década de contrabando y actividad pirática y corsaria de manera acusada en el Archipiélago canario. Asimismo a esta circunstancia debemos añadir las cuestiones religiosas caracterizadas por la extensión del protestantismo en Europa y la consecuente actuación del Concilio de Trento junto a la actividad inquisitorial que se tornará cada vez más rígida, fundamentalmente en los lugares de fronteras como es el caso isleño. Igualmente es importante tener en cuenta que la actividad económica se conforma como pilar del desarrollo y la evolución socio-económica de las Islas, sobre todo en su papel de enlace entre Europa, África y América.This research pretends to be a rundown and rigorous analysis that help us to have a better knowledge of the Canarian Society, and over all, its relationship with the outer, principally in the Europe Atlantic Ocean. In this way, we consider that it is another contribution for the deep understanding of the

  20. Conventos femeninos en el urbanismo de Canarias (siglos XVI-XIX

    Directory of Open Access Journals (Sweden)

    Juan Sebastián López García

    2013-11-01

    Full Text Available Los  monasterios femeninos poseyeron una desigual presencia en el archipiélago canario, dado que sólo hubo fundaciones en tres de las siete islas, repartidos en nueve poblaciones, con un total de quince inmuebles hasta el siglo XIX. Las fundaciones más antiguas datan del siglo XVI, ya que debe recordarse que la incorporación de Canarias a la Corona de Castilla se produjo a lo largo de la centuria anterior. En cuanto a las órdenes, las más numerosas fueron las franciscanas (clarisas y concepcionistas con seis monasterios, a las que siguen las dominicas o catalinas y las bernardas, con cuatro, cada una, mientras las agustinas recoletas sólo poseyeron uno. La mayoría se pueden considerar urbanos o semiurbanos por el carácter de la ciudad o villa donde se emplazan, ocupando casi siempre las zonas más céntricas. Esta misma posición en la trama fue un factor decisivo en el momento de la desamortización, cuyas medidas provocaron la desaparición de la mayoría de los edificios, pasando los solares a ser ocupados por espacios libres (plazas y jardines, edificios público de nueva planta (ayuntamientos, teatros o construcciones privadas. Sólo permanecen abiertos en la actualidad las Catalinas y Claras de La Laguna y las Concepcionistas de Garachico, todos en Tenerife.Female monasteries in the urbanism of the Canary lslands (c. XVI-XIX The presence of nunneries in the Canary Archipelago was uneven. The fifteen buildings that appear up to the Nineteenth Century are distributed in only nine towns, and three of the seven islands. The earliest foundations date back to the Sixteenth century, as the Canaries were conquered by the Crown of Castilla only in the previous Century. The “Franciscanas (Clarisas an Concepcionistas” with six monasteries,was the most numerous Order, followed by "Dominicas or Catalinas", and the "Bernardas" with four each, and finally the "Agustinas Recoletas" with only one. The majority can be considered urban or semi

  1. Groundwater flow in a volcanic-sedimentary coastal aquifer: Telde area, Gran Canaria, Canary Islands, Spain

    Science.gov (United States)

    Cabrera, M. C.; Custodio, E.

    Groundwater conditions in a 75- km2 coastal area around the town of Telde in eastern Gran Canaria island have been studied. Pliocene to Recent volcanic materials are found, with an intercalated detrital formation (LPDF), which is a characteristic of the area. Groundwater development has become intensive since the 1950s, mostly for intensive agricultural irrigation and municipal water supply. The LPDF is one order of magnitude more transmissive and permeable than the underlying Phonolitic Formation when median values are compared (150 and 15 m2 day-1 5 and 0.5 m day-1, respectively). These two formations are highly heterogeneous and the ranges of expected well productivities partly overlap. The overlying recent basalts constituted a good aquifer several decades ago but now are mostly drained, except in the southern areas. Average values of drainable porosity (specific yield) seem to be about 0.03 to 0.04, or higher. Groundwater development has produced a conspicuous strip where the watertable has been drawn down as much as 40 m in 20 years, although the inland watertable elevation is much less affected. Groundwater reserve depletion contributes only about 5% of ed water, and more than 60% of this is transmitted from inland areas. Groundwater discharge into the sea may still be significant, perhaps 30% of total inflow to the area is discharged to the sea although this value is very uncertain. Les conditions de gisement de l'eau souterraine d'une région de 75 km2 de la côte Est de l'île de la Grande Canarie (archipel des Canaries), dans le secteur de Telde, ont été étudiées, en utilisant seulement les données fournies par les puits d'exploitation existants. Les matériaux volcaniques, d'âge Pliocène à sub-actuel, sont séparés par une formation détritique (FDLP), qui constitue la principale singularité de cette région. L'exploitation de l'eau souterraine est devenue intensive à partir de 1950, principalement pour des besoins d'irrigation (agriculture

  2. LLUVIAS E INUNDACIONES EN LOS CENTROS TURÍSTICOS DE GRAN CANARIA: EL CASO DE SAN BARTOLOMÉ DE TIRAJANA

    Directory of Open Access Journals (Sweden)

    Pablo Máyer Suárez

    2006-01-01

    Full Text Available El sur de Gran Canaria ha sido intensamente transformado por las instalaciones turísticas que, desde 1962, se han realizado. Entre las consecuencias ambientales de este proceso destacan las inundaciones. El objetivo de este trabajo es determinar si existe relación entre las implantaciones turísticas y el incremento, en las últimas décadas, de los daños producidos por las inundaciones. Para ello se ha realizado un análisis diacrónico entre 1962 y la actualidad, comparando la evolución entre los episodios de lluvia intensa y los problemas generados. Los resultados señalan que el reciente incremento de los perjuicios, derivados de las inundaciones, se explica por la forma en que se han realizado los crecimientos urbanos y las infraestructuras turísticas a ellos asociados.

  3. The quarry and workshop of Barranco Cardones (Gran Canaria, Canary Islands: Basalt quern production using stone tools

    Directory of Open Access Journals (Sweden)

    Yurena Naranjo-Mayor

    2016-09-01

    This paper analyses the operational sequence, that is, the different phases of the extraction and fashioning techniques of basalt rotary querns based on the recent finds of two quarries located near the coast (Cardones and Cebolla and a quern manufacturing workshop (Cave 36, Arucas Municipality in a ravine about 600 m inland. Traditionally it was thought that the Pre-European population of Gran Canaria fashioned their querns from naturally detached volcanic surface blocks collected in ravines or along the coast. This supposition was based on the idea that the early Canarians were not capable of extracting blocks from bedrock with stone tools. This notion, however, has been proven wrong by the circular extraction negatives on the quarry faces and by finds of stone fashioning tools in the workshop.

  4. Análisis de la nueva Ley de Radio y Televisión Pública de Canarias

    Directory of Open Access Journals (Sweden)

    R Zallo

    2015-04-01

    Full Text Available La nueva Ley de Radio y Televisión Públicas de la Comunidad Autónoma de Canarias (Ley 13/2014, de 26 de diciembre, y que sustituye a la anterior, aparece en un momento delicado para las radiotelevisiones autonómicas, hoy puestas en cuestión desde varios frentes. También se produce como aplicación del doble marco de la Ley General de Comunicación Audiovisual de 2010 y de su modificación por la ley 6/2012, de 1 de agosto y que flexibilizaba los modos de gestión de los canales públicos de televisión. El artículo analiza el aprovechamiento de las oportunidades que ofrecía la Ley General para democratizar el medio –en lo que se ha avanzado significativa pero insuficientemente–, para profundizar en la autogestión de la programación y los contenidos y para encarar los retos de Internet y concluye que la nueva Ley canaria es un avance para el servicio público respecto a los modelos del pasado pero se queda a medio camino del fortalecimiento del servicio público de RTV autonómica en este inicio de era digital. Además de la letra y espíritu del documento final del legislador se aborda su proceso de gestación y de la filosofía que lo impregna mediante el análisis de las enmiendas de los distintos grupos parlamentarios en el curso de su debate.

  5. Las cerámicas aborígenes de Gran Canaria (Islas Canarias a través del yacimiento de La Cerera: materias primas, tecnología y función

    Directory of Open Access Journals (Sweden)

    del Pino Curbelo, Miguel

    2016-06-01

    Full Text Available This paper focuses on the study of the pre-Hispanic ceramics from the site of La Cerera (Gran Canaria (7th century AD – 13th century AD. An integrated approach combining various levels of analysis has been carried out, employing morphological, technical and functional analysis of the pots, as well as their instrumental characterization: X-ray fluorescence (XRF, X-ray diffraction (XRD, optical petrography and scanning electron microscopy (SEM. As result, different operative chains have been detected, linked to function and chronology. Other differences with respect to the characteristics of the archaeological materials through time were also identified. Those transformations seem to coincide with others already observed for various elements of the aboriginal material culture at the site, as well as at other parts of the island. The effects of the intensification of pottery production on the homogeneity of the fabrics are also discussed.Se analizan los materiales cerámicos prehispánicos del yacimiento de La Cerera en Gran Canaria (siglos VII-XIII D.C.. Se integra la clasificación morfotécnica y funcional, y la caracterización instrumental mediante fluorescencia de rayos X (FRX, difracción de rayos X (DRX, petrografía óptica (PO y microscopía electrónica de barrido (MEB relacionando cada nivel de estudio aplicado. Como resultado se detectaron diferentes cadenas operativas, conectadas con la función de los vasos y su cronología. Además se observaron importantes cambios diacrónicos en las características del material. Estos parecen coincidir con otros identificados en el registro del propio yacimiento y en otros sitios de la isla. También se discuten los posibles efectos de la intensificación de la producción sobre la homogeneidad de las fábricas cerámicas.

  6. Platería europea en Canarias. La bandeja de Teguise, la copa con tapa y las fuentes de la cetadral de Las Palmas

    Directory of Open Access Journals (Sweden)

    Jesús Pérez Morera

    2013-11-01

    Full Text Available Abordamos en este trabajo la correcta clasificaci6n de una serie de piezas da platería de origen flamenco, alemán y portugués existentes en Canarias que, aunque conocidas, habían pasado por españolas o americanas. Destacarnos la bandeja de la parroquia de Teguise (Lanzarote, labrada en Hamburgo por juergen Richels hacia 1680; la copa con tapa de la catedral de Las Palmas (Gran Canaria, realizada en Amberes por el maestro del compás en 1548-1549; y !as fuentes pertenecientes al obispo Vicuña y Zuazo de la misma catedral, marcadas en Lisboa a finales del siglo XVII.The current article approaches the correct classification of a variety o¡ flemish, german and portuguese silversmith's pieces located in the Canary Islands which, though very well known, had been considered form Spanish or american origin. We emphasize the tray from the Parisf of Teguise (Lanzarote\\, wrought in Hamburg by Juergen Richels circa 1680; the Chalice with Lid Las Palmas cathedral (Gran Canaria made in Antwerp by the Master  of  the compass in 1548-49; and the fountains belonging to Bishop Vicuña y Zuazo from the same cathedral, marked in Lisbon at the end of XVII century. 

  7. UNIFORMIDAD FISCAL VERSUS TERRITORIOS PRIVILEGIADOS EN LA ESPAÑA DEL SIGLO XVIII: LOS CASOS DE NAVARRA Y CANARIAS

    Directory of Open Access Journals (Sweden)

    Sergio Solbes Ferri

    2014-12-01

    Full Text Available El trabajo se organiza desde una doble reflexión. Por un lado, el éxito o el fracaso en la aplicación de los proyectos de reforma fiscal diseñados para su imposición en el conjunto de la Monarquía española en la primera mitad del siglo XVIII. Por otro lado, el éxito o el fracaso en la defensa de los privilegios fiscales de Navarra y de Canarias, territorios en los que Felipe V no pudo, ni quiso, imponer el derecho de conquista tras la guerra de Sucesión. Analizamos estas especificidades con la intención de conocer aquellos aspectos que perduran en el tiempo y aquellos que desaparecen. Finalmente, tratamos de reflexionar sobre si el resultado final es la consecuencia necesaria de un proyecto de reforma preconcebido o de una simple adaptación a las circunstancias propias del devenir histórico. Apostamos por la primera solución, así que tratamos en integrar los cambios implementados con el pensamiento y los programas de reforma diseñados por Alberoni y Patiño.AbstractThis study is organized from a double perspective. Firstly, the success or failure in the implementation of projects designed to reform taxation in the whole Spanish monarchy during the first half of the eighteenth century. On the other hand, the success or failure in defending the fiscal privileges of Navarra and Canarias, territories in which Philip V could not impose the right of conquest after the War of Succession. We analyse these specificities with the intention of meeting those aspects that remain and those that disappear. Lastly, we try to reflect if the final status is the result of a preconceived reform project or a simple adaptation to the circumstances of the historical development. We focus on the first solution, so we try to relate the implemented changes with the Alberoni and Patiño reform programs.

  8. EL MAR DE CANARIAS. DESCRIPCIÓN GEOPOLÍTICA DE UNA SITUACIÓN PROBLEMÁTICA

    Directory of Open Access Journals (Sweden)

    Gilberto Martín Teixé

    2005-12-01

    Full Text Available RESUMEN:El estudio y debate sobre el ordenamientojurídico de las aguas territoriales en las Islas Canarias es tema de permanente actualidad. En el problema inciden la situación geográfica de las islas, el status político administrativo por el que se rigen y la legislación del Derecho Internacional del Mar que se le aplica. La soluciones que se aportan son diversas y comúnmente supeditadas a la visión política que las inspiran. PALABRAS CLAVE:Geopolítica, Islas Canarias, archipiélago, aguas territoriales, aguas interiores, mar territorial, zona económica exclusiva, La Convención del Mar de las Naciones Unidas sobre el Derecho del Mar. ABSTRACT:The research and debate on the Canary Islands territorial waters legal code is always a current affair. Many aspects such as the geographic situation of the islands, the political administrative status and the intemational legislation of the sea to be applied are involved in this problem. The solutions that are offered are numerous and generally subordinated to the political vision that inspire them. KEY WORDS:Geopolitics, Canary Islands, archipelago, territorial waters, internal waters, territorial sea, exclusive economic zone, United Nations Convention on the Law of the Sea (UNCLOS RÉSUMÉ:"L'étude et le débat de l'ordonnance juridique des eaux territoriales aux iles Canaries est un sujet de permanente actualité. Dans le problkme coincident la situation géograp- hique, le status politique-administratif par lequel elles sont régies et la Législation du Droit Intemational de la Mer que l'on lui applique. Les solutions apportées sont différentes et norma- lement soumises a la vision politique qui les inspirent". MOTS CLÉ:Géographie politique, Iles Canaries, archipel, eaux territoriale, eaux intérieures, mer territoriales, zone économique exclusive, La Convention des Nations Unies sur le droit de la Mer. 

  9. La jerarquía y el sistema urbano de Canarias durante el Antiguo Régimen

    Directory of Open Access Journals (Sweden)

    Pedro C. QUINTANA ANDRÉS

    2009-12-01

    Full Text Available RESUMEN: El organigrama y la jerarquía urbana en las Islas Canarias se encuentran mediatizadas por la estructura económica y el desarrollo de la formación social regional. El fraccionamiento del espacio, la dependencia exterior, la posición geoestratégica internacional o las reiteradas alternativas en la potenciación de diversos productos de exportación fueron los que marcaron, a grandes rasgos, las principales características del sistema urbano canario. La ciudad surge allí donde se asientan los órganos del poder que representan a la Corona, la Iglesia y a la población (Cabildo, Obispado, Real Audiencia, Capitán General, asumiendo gran parte de las funciones demandadas por los vecinos de toda la región. A su vez, una alícuota parte de su población será la que acumule y redistribuya las rentas generadas, beneficiando a esta oligarquía local compuesta por grandes comerciantes extranjeros, hacendados y eclesiásticos que integran el Cabildo Catedral. Palabras clave: Islas Canarias, España, sistema social urbano, oligarquía local, comerciantes extranjeros, Cabildo Catedralicio.ABSTRACT: The chart and the urban hierarchy in the Canary Islands are mediatized by the economic structure and the development of social and regional formation. The division of the space, the external dependence, the geostrategic international position or the reiterated choices, giving the power to different export products, marked to a great extent the main characteristic of the cañarían urban system. The city appears where the différents parts of power are settled so they represent the Crown, the Church and the population (Inter-island Council, Bishopric, County Court, Field Marshal, also this city assumes the majority of functions requested by neighbours from all the regions. At the some time, an aliquot part of population will accumulate and distribute the generated incomes in favour of this local oligarchy constituted by great foreing merchants

  10. Incidentes en la zona aérea de Canarias y Africa occidental durante la II Guerra Mundial

    Directory of Open Access Journals (Sweden)

    Juan José Díaz Benítez

    2013-11-01

    Full Text Available La política exterior española durante la II Guerra Mundial empezó a virar hacia la neutralidad con la llegada de Gómez Jordana al Ministerio de Asuntos Exteriores en 1942. Sin embrago, la colaboración con el Eje, aún no concluida, provocó, fuertes presiones por parte de los aliados durante el resto de la guerra y alentó la sospecha de que aún continuaba el abastecimiento clandestino de submarinos alemanes en Canarias. Por ello. los aviones aliados sobrevolaron frecuentemente la Zona Aérea de Canarias y África Occidental entre principios de 1943 y el verano de 1944, provocando la reacción de las baterías de artillería antiaérea españolas e incluso la intervenci6n de los cazas con base en Gando. En ningún momento las fuerzas españolas intentaron derribar a los aviones aliados que atravesaban las aguas territoriales, sino sólo avisarlos para que se retiraran. No obstante, los aviones aliados persistieron, dando lugar a graves incidentes que estuvieron punto de ocasionar una fatalidad. Finalmente, las prolongadas gestiones diplomáticas emprendidas a finales de 1943 acabaron con estos incidentes, los cuales son un ejemplo olvidado de las tensas relaciones entre España y los aliados durante el declive del Eje.Spanish foreign policy through World War II turned to the way of neutrality after Gómez Jordana arrived at the Ministry of Foreign Affaires in 1943.  Howver, the persistent aid to tha Axis rose strong pressures by the Allies for the rest of the war and encouraged them for searching German U-boots at the Canary Islands. So Allied airplanes frequently flew over the Canary Islands and West Africa Aerial Zone between the beginning of 1943 and the summer of 1944, tempting the Spanish anti-aircraft batteries and the fighters based in Gaildo Gando reaction. The Spanish forces never tried to destroy the Allied aircrafts, but baut only warned them to keep away from yje Spanish aerial zone. Nevertheless, Allied planes still went on

  11. Propuesta de rutas de geoturismo urbano en Icod de Los Vinos (Tenerife, Islas Canarias, España

    Directory of Open Access Journals (Sweden)

    Javier Dóniz-Páez

    2016-01-01

    Full Text Available En los destinos maduros de sol y playa los nuevos productos y experiencias turísticas son una realidad palpable. El geoturismo urbano se presenta como un producto de turismo muy novedoso que consiste en explotar turísticamente el relieve presente dentro de las ciudades. Este artículo propone diferentes rutas de geoturismo urbano en el municipio de Icod de Los Vinos (Tenerife, Canarias, España a partir del inventario, caracterización y valoración del patrimonio geomorfológico presente en los diferentes geomorfositios y en el patrimonio cultural tangible inmueble. Se han seleccionado doce recursos naturales y culturales vinculados con la geodiversidad de Icod de los Vinos. En función de la variedad de recursos inventariados y de las posibilidades que ofrece esta nueva modalidad de ocio turístico, los itinerarios propuestos responden a tres rasgos principales: el tiempo geológico, la temática geológica y geomorfológica, y la espacial.

  12. El «Edificio Central» en las Palmas de Gran Canaria – España

    Directory of Open Access Journals (Sweden)

    Ruiz Duerto, A.

    1972-11-01

    Full Text Available A description is given of the program, characteristics, and building solutions for this unique building, situated in downtown Las Palmas. The building complex is composed of two underground levels for parking, a ground-floor and mezzanine for commercial purposes, and open plaza with swimming pool, dressing rooms, cafeteria, restaurant, dance spot, playground, and a block of 15 floors containing 137 apartments of varying size arranged so as to minimize sun overexposure and maximize privacy. The structure is of reinforced concrete and lightweight slabs, and enjoys quality fixtures which assure excellent functioning.Se describe el programa, características y solución constructiva de este edificio singular, situado en el centro cívico de Las Palmas de Gran Canaria. Se compone de: — dos plantas de sótano para estacionamiento de vehículos; planta baja comercial; — entreplanta comercial; — planta libre ajardinada con piscina, vestuarios-aseos, cafetería, restaurante, club de baile, juego de niños, guardería, etc.; — un bloque de 15 plantas con 137 apartamentos, de superficie variada, y dispuesto de forma que evite perjuicios de soleamiento y vistas a los edificios circundantes. Estructura de hormigón armado y losas aligeradas, con toda suerte de instalaciones que aseguren su perfecto funcionamiento.

  13. Estudio micológico de El Canal y Los Tiles (La Palma, Islas Canarias. V. Datos adicionales

    Directory of Open Access Journals (Sweden)

    Leal, Julio

    2009-12-01

    Full Text Available An annotated catalogue of 66 taxa, collected in the early MAB Reserve El Canal y Los Tiles is presented. Among these taxa, 11 species are new for La Palma island and 5 are recorded for the first time in the Canary Islands. Taxonomic comments on some critical species and information about the distribution in the Macaronesian bioregion of all the studied taxa are given. Based on our previous publications, global data on biodiversity, substrates and distribution of the mycobiota in the different plant communities present in the sampled area are analyzed.

    Se presenta un estudio sobre 66 especies, pertenecientes a las divisiones Myxomycota (21, Ascomycota (29 y Basidiomycota (16, encontradas en la antigua Reserva de la Biosfera El Canal y Los Tiles. De ellas 11 se citan por primera vez para la isla de La Palma, siendo 5 de éstas nuevas para Canarias. Se hacen comentarios taxonómicos sobre algunos táxones conflictivos, además de amplia información sobre su distribución en la Región Macaronésica. En base a publicaciones propias anteriores, se aportan datos globales sobre biodiversidad, sustratos y distribución de la micobiota en las diferentes unidades ambientales presentes en el área de estudio.

  14. Modelos para datos de la economía canaria en los dominios del tiempo y de la frecuencia

    Directory of Open Access Journals (Sweden)

    Gil-Fariña. María Candelaria

    2010-01-01

    Full Text Available La aplicación de algoritmos numéricos relacionados con la aproximación racional de funciones y las transformadas de Fourier y Wavelets han sido objeto de nuestras investigaciones. En este trabajo queremos presentar un breve resumen de los resultados conseguidos a nivel metodológico en su aplicación a la modelización de datos cronológicos. Los ilustramos a través de datos de la economía canaria que tienen que ver con dos sectores destacados de la economía isleña, a saber, el cultivo en declive del plátano que afecta a toda la región y el consumo de agua, siempre bien escaso, en la ciudad de Santa Cruz de Tenerife. En el primer caso, utilizamos modelos en el dominio del tiempo, en particular los modelos de Función de Transferencia en el contexto de la metodología Box-Jenkins, que han sido completados con la inclusión de las expectativas de los inputs. En el segundo caso, debido al interés por conocer los índices de frecuencia relevantes en la serie, hemos utilizado la transformada de wavelets. Así, obtenemos simultáneamente propiedades en el dominio del tiempo y en el dominio de la frecuencia, completando las conclusiones que se obtienen haciendo uso de la transformada de Fourier.

  15. Causes of Admission for Raptors to the Tafira Wildlife Rehabilitation Center, Gran Canaria Island, Spain: 2003-13.

    Science.gov (United States)

    Montesdeoca, Natalia; Calabuig, Pascual; Corbera, Juan A; Orós, Jorge

    2016-07-01

    We report the causes of morbidity of 2,458 free-living raptors admitted to the Tafira Wildlife Rehabilitation Center on Gran Canaria Island, Spain, during 2003-13. The seasonal cumulative incidences were investigated while considering estimates of the wild populations in the region. These methods were used as a more accurate approach to assess the potential ecologic impact of different causes of morbidity. The most frequently admitted species were the Eurasian Kestrel ( Falco tinnunculus ; 53.0%), the Eurasian Long-eared Owl ( Asio otus canariensis; 28.1%), the Canary Islands Common Buzzard ( Buteo buteo insularum; 8.0%), and the Eurasian Barn Owl ( Tyto alba ; 4.4%). The most frequent causes of admission were trauma (33.8%), orphaned-young birds (21.7%), unknown (18.4%), and metabolic/nutritional disease (11.1%). Local morbidity caused by glue trapping and entanglement in burr bristlegrass (Setaria adhaerens) had prevalences of 5.0% and 1.8%, respectively. The highest number of admissions during the breeding and nonbreeding seasons was observed for the Eurasian Barn Owl and the Barbary Falcon ( Falco pelegrinoides ), respectively, mainly due to trauma of unknown origin.

  16. El abastecimiento y la saca de bastimentos de Gran Canaria : el pleito de D. Pdro Sarmiento de Ayala y Rojas

    Directory of Open Access Journals (Sweden)

    Germán Santana Pérez

    1996-01-01

    Full Text Available El abastecimiento de cereal era uno de los problemas más acuciantes a que se enfrentaron cada uno de los cabildos de las Islas Canarias durante todo el Antiguo Régimen. El hecho de la insularidad conllevaba a la vez, respecto a otras regiones continentales, una serie de ventajas y desventajas a la hora de asegurar el alimento. Durante este periodo, debido a la propia organización económica del Archipiélago, y a sus limitaciones, las continuas y periódicas malas cosechas afectaban cada pocos años a las producciones alimenticias de cada isla, no sólo de pan sino de otros mantenimientos comestibles, incluyendo el ganado, ya que al no haber siquiera pasto para que pudieran comer, en época de sequía, por plaga de langosta, etc., éste acababa pereciendo de hambre, lo que traía como efecto que la población sufriera estas consecuencias (si bien unas clases sociales más que otras.

  17. Metodología para un proceso apreciativo, dinámico y colaborativo: III Plan de Salud de Canarias

    Directory of Open Access Journals (Sweden)

    José Joaquín O'Shanahan Juan

    2016-11-01

    Full Text Available La necesidad de nuevos enfoques de planificación estratégica con la incorporación de la visión de profesionales y ciudadanos ha orientado un nuevo modelo para el III Plan de Salud de Canarias (IIIPSC. Se propone un proceso participativo con soporte de metodología cualitativa en dos etapas: 1 fase local: estudio cuantitativo-cualitativo a través de una acción formativa y de investigación-acción-participación, y 2 fase insular: conferencias de salud, con debate sobre resultados en sesiones presenciales en cada área de salud (isla y propuestas de acción. El proceso define una priorización de problemas y un plan de acción específico para cada isla mediante operaciones consideradas viables, agrupadas por temas y ponderadas según el potencial impacto sobre los problemas priorizados. Este proceso de interacción puede contribuir a orientar los cambios de modelo de planificación y la toma de decisiones en política sanitaria, y se encuentra recogido en el Proyecto del IIIPSC para su tramitación parlamentaria.

  18. Paediatric invasive pneumococcal disease on the island of Gran Canaria: 16-year prospective study (2001-2016).

    Science.gov (United States)

    Santana Hernández, Milagrosa; Aguiar-Santana, Ione Ahedey; Artiles Campelo, Fernando; Colino Gil, Elena

    2017-11-24

    To calculate the incidence of invasive pneumococcal disease (IPD) in the paediatric population of Gran Canaria (Spain), its clinical and epidemiological characteristics, serotype distribution, antibiotic resistance, and variations in these variables before and after the introduction of the PCV13 vaccine. Prospective hospital-based study including all patients (190) aged 0-14 years admitted with confirmed IPD between January 2001-May 2010 (152 cases) and June 2010-December 2016 (38 cases). Patients were divided into 3 age groups (5 years). Clinical symptoms were mutually-exclusively classified as meningitis, bacteraemic pneumonia, pleural effusion (PE), empyema or bacteraemia without a focus. Most cases occurred in boys (59.47%), during autumn-winter (65.79%), in children aged <2 years (55.79%) and with mean age increasing from the pre-PCV13 to the post-PCV13 period (2.5 vs 3.1 years). Incidence between periods reduced by 66.4% (p<0.001): from 13.1/100,000 to 4.4/100,000. PEs (3.9% vs 18.4%, p<0.005) and empyemas (1.5% vs 16.7%, p=NS) increased in the post-PCV13 period whereas all other symptoms decreased, although this was not statistically significant. Vaccine serotypes (77% vs 40.6%, p=0.000), particularly serotypes 19A (23.9% vs 12.5%) and 14 (14.2% vs 9.4%), as well as erythromycin resistance (57.2% vs 7.9%, p=0.000) decreased in the post-PCV13 period. IPD incidence, vaccine serotypes and erythromycin resistance decreased in the post-PCV13 period whereas PEs increased. Copyright © 2017 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  19. Observations of one young and three middle-aged γ-ray pulsars with the Gran Telescopio Canarias

    Science.gov (United States)

    Mignani, R. P.; Testa, V.; Rea, N.; Marelli, M.; Salvetti, D.; Torres, D. F.; De Oña Wilhelmi, E.

    2018-04-01

    We used the 10.4m Gran Telescopio Canarias to search for the optical counterparts to four isolated γ-ray pulsars, all detected in the X-rays by either XMM-Newton or Chandra but not yet in the optical. Three of them are middle-aged pulsars - PSR J1846+0919 (0.36 Myr), PSR J2055+2539 (1.2 Myr), PSR J2043+2740 (1.2 Myr) - and one, PSR J1907+0602, is a young pulsar (19.5 kyr). For both PSR J1907+0602 and PSR J2055+2539 we found one object close to the pulsar position. However, in both cases such an object cannot be a viable candidate counterpart to the pulsar. For PSR J1907+0602, because it would imply an anomalously red spectrum for the pulsar and for PSR J2055+2539 because the pulsar would be unrealistically bright (r' = 20.34 ± 0.04) for the assumed distance and interstellar extinction. For PSR J1846+0919, we found no object sufficiently close to the expected position to claim a possible association, whereas for PSR J2043+2740 we confirm our previous findings that the object nearest to the pulsar position is an unrelated field star. We used our brightness limits (g' ≈ 27), the first obtained with a large-aperture telescope for both PSR J1846+0919 and PSR J2055+2539, to constrain the optical emission properties of these pulsars and investigate the presence of spectral turnovers at low energies in their multi-wavelength spectra.

  20. A long-term retrospective study on rehabilitation of seabirds in Gran Canaria Island, Spain (2003-2013.

    Directory of Open Access Journals (Sweden)

    Natalia Montesdeoca

    Full Text Available The aims of this study were to analyze the causes of morbidity and mortality in a large population of seabirds admitted to the Tafira Wildlife Rehabilitation Center (TWRC in Gran Canaria Island, Spain, from 2003 to 2013, and to analyze the outcomes of the rehabilitation process.We included 1,956 seabirds (133 dead on admission and 1,823 admitted alive in this study. Causes of morbidity were classified into nine categories: light pollution (fallout, fishing gear interaction, crude oil, poisoning/intoxication, other traumas, metabolic/nutritional disorder, orphaned young birds, other causes, and unknown/undetermined. The crude and stratified (by causes of admission rates of the three final disposition categories (euthanasia Er, unassisted mortality Mr, and release Rr, the time until death, and the length of stay were also studied for the seabirds admitted alive.Yellow-legged Gull (Larus michahellis was the species most frequently admitted (46.52%, followed by Cory's Shearwater (Calonectris diomedea borealis (20.09%. The most frequent causes of morbidity were light pollution (fallout (25.81%, poisoning/intoxication (24.69%, and other traumas (18.14%. The final disposition rates were: Er = 15.35%, Mr = 16.29%, and Rr = 68.34%. The highest Er was observed in the 'other traumas' category (58.08%. Seabirds admitted due to metabolic/nutritional disorder had the highest Mr (50%. The highest Rr was observed in the light pollution (fallout category (99.20%.This survey provides useful information for the conservation of several seabird species. We suggest that at least the stratified analysis by causes of admission of the three final disposition rates, and the parameters time until death and length of stay at the center should be included in the outcome research of the rehabilitation of seabirds. The high release rate for seabirds (68.34% achieved at the TWRC emphasizes the importance of wildlife rehabilitation centers for the conservation of seabirds.

  1. [Guillain-Barré syndrome in the northern area of Gran Canaria and the island of Lanzarote].

    Science.gov (United States)

    Aladro-Benito, Y; Conde-Sendin, M A; Muñoz-Fernández, C; Pérez-Correa, S; Alemany-Rodríguez, M J; Fiuza-Pérez, M D; Alamo-Santana, F

    The objective of this study is to analyse the incidence and clinical characteristics of Guillain Barre syndrome (GBS) in the Canary Islands. We conducted a retrospective study of GBS patients (according to diagnostic criteria from the National Institute of Neurological and Communicative Disorders and Stroke) treated in the Ntra. Sra. del Pino Hospital in Gran Canaria between 1983 and 1998. Annual incidence, seasonal distribution, preceding infection, clinical and electrophysiological data, and evolution were all evaluated. Prognostic factors were studied by means of a univariate analysis. A total of 81 patients were selected for the study. The raw incidence was 1.04/100,000 inhab./year (CI 95%: 0.83 1.29; adjusted for age to the European population: 1.5). The rates of incidence were higher in men and increased lineally with age in both sexes. We observed an upward tendency during the winter months. 48% of the patients displayed serious motor deficits in the nadir of the disease, and 17.8% required assisted ventilation. After one year s evolution 74% were seen to experience an excellent recovery. The mortality rate was 8.2% and 37% received immunomodulatory treatment. The main variables associated with a bad prognosis at 3 and 12 months were: serious deficits in muscular balance, the need for assisted ventilation and very reduced amplitude of evoked motor potential. GBS incidence in the Canary Islands is similar to that found in other countries. An increase with age and an upward tendency during the winter months was observed. No differences were found in the clinical data as compared with other series.

  2. COMPETITIVIDAD Y CALIDAD EN LOS DESTINOS TURÍSTICOS DE SOL Y PLAYA. EL CASO DE LAS ISLAS CANARIAS

    Directory of Open Access Journals (Sweden)

    J. Rosa Marrero Rodríguez

    2008-01-01

    Full Text Available El objeto del artículo es conocer y comparar el nivel de competitividad que presentan las cuatro islas turísticas canarias más importantes, a través de la combinación de diferentes variables de aproximación al mismo. Todo ello se plantea en el contexto más general de discusión de los mecanismos de reconversión y reposicionamiento en los destinos tradicionales de sol y playa a través de la implementación de elementos de calidad en el negocio turístico. Para acercarnos a la medición de la competitividad se ha usado una metodología doble: a través de las estadísticas del gasto turístico, los niveles de ocupación y la evolución del número de plazas y de turistas. Y también a través de un pequeño estudio de casos en Internet, donde se han analizado los precios para dos paquetes turísticos característicos. Los resultados coinciden en indicar que, a pesar de la estrategia de calidad adoptada por Lanzarote, esto no parece traducirse en una mayor rentabilidad económica para el sector. En definitiva, a pesar de la proclamada importancia de la calidad como factor clave de competitividad, no está claro que el mercado esté dispuesto a recompensar a aquellos destinos que apuestan con precios mayores por la calidad.

  3. [Macrolide-resistant Streptococcus pneumoniae on the islands of Gran Canaria and Lanzarote (Spain): molecular mechanisms and serogroup relationships].

    Science.gov (United States)

    Artiles, Fernando; Horcajada-Herrera, Iballa; Noguera-Catalán, Javier; Alamo-Antúnez, Isabel; Bordes-Benítez, Ana; Lafarga-Capuz, Bernardo

    2007-11-01

    Macrolide resistance in Streptococcus pneumoniae is coded by the ermB and mefA/E genes. The aim of this study was to determine the status of macrolide-resistance, the molecular mechanisms involved, the serogroup relationships, and the level of co-resistance in S. pneumoniae isolates from Gran Canaria and Lanzarote, in the Canary Islands, Spain. Macrolide resistance phenotypes were investigated in 261 S. pneumoniae clinical isolates over a two-year period (2004 and 2005). Genotypes were determined by PCR (detection of ermB and mefA/E genes). Overall macrolide resistance was 40.6% (106 isolates); 79.2% (84) of resistant isolates presented the MLSB phenotype (98.8% harbored the ermB gene), with a predominance of serogroup 19, and 20.8% (22) presented the M phenotype (77.3% displayed the mefA/E gene), all associated with serogroup 14. Worthy of note, the M phenotype was found in 8 invasive isolates from Lanzarote (80%) all from serogroup 14. The ermB and mefA/E genes were detected in 7 isolates belonging to serogroup 19. Absence of co-resistance was observed most frequently in serogroup 14 (66.7%). Co-resistance with penicillin G, tetracycline, and trimethoprim-sulfamethoxazole was associated with serogroup 19 (36.8%). Two isolates (0.8%) were resistant to telithromycin. The frequency of macrolide resistance mechanisms in the Canary Islands is different from that observed in the rest of Spain, particularly in Lanzarote, where 80% of isolates harbored the mefA/E gene and belonged to serogroup 14.

  4. LA INNOVACIÓN EDUCATIVA EN ESPAÑA DESDE LA PERSPECTIVA DE GRUPOS DE DISCUSIÓN: EL CASO DE LA COMUNIDAD AUTÓNOMA DE CANARIAS

    Directory of Open Access Journals (Sweden)

    Juan Santiago Arencibia Arencibia

    2010-01-01

    Full Text Available El artículo se enmarca en una investigación llevada a cabo en todas las comunidades de España sobre las características, impacto y problemática de la innovación educativa iniciada desde los propios centros escolares. En el estudio realizado en la Comunidad Canaria, se utilizaron grupos de discusión con representantes de distintos estamentos relacionados con proyectos de innovación escolar. Los participantes reconocen los esfuerzos de la Administración Canaria por simplificar burocráticamente las convocatorias de proyectos de innovación lo que, a su vez, aumenta las posibilidades de que más centros participen. A pesar de ello, el análisis de nuestros participantes deja claro que la selección de líneas prioritarias en las convocatorias no está suficientemente contrastada con la práctica, los tiempos y recursos asignados no son realistas, y la ausencia de unos procedimientos claros de seguimiento y evaluación convierte a la mayor parte de los proyectos en ceremonias poco sostenibles. Así, la Administración puede decir que desembolsa presupuesto en innovación pero no consigue implicar a la mayor parte de los centros y tampoco tiene respuestas acerca de qué resultados se están obteniendo. Existe pues una burocracia de la innovación pero tal vez todavía no haya todavía una política de innovación educativa en Canarias.

  5. Estudios sobre identificación, lactación y cría de dromedarios en la isla de Fuerteventura (Canarias)

    OpenAIRE

    Díaz Medina, Elena

    2017-01-01

    El objetivo de esta Tesis es dar respuesta a una serie de preguntas fundamentales planteadas al intentar poner en marcha una granja de camellas lecheras de raza Canaria en la isla Fuerteventura. Para ello se realizaron 3 experimentos, destinados a: proponer la adecuada identificación (ID) individual de los camellos (Exp. 1), cuantificar la producción y analizar los principales componentes de la leche, así como los niveles de insulina (INS) durante la lactación (Exp. 2), y finalmente estudiar ...

  6. Estudio de la presencia de peligros (aflatoxinas) y fraudes (uso no declarado de cereal transgénico) en el gofio producido en Gran Canaria

    OpenAIRE

    Collado Perera, Miguel Ángel; Millán de Larriva, Rafael; Sanjuán Velázquez, Esther

    2006-01-01

    [ES] Todavía hoy, los cereales son en gran medida el alimento más importante de la humanidad. En las Islas Canarias existe un alimento muy típico elaborado a base de cereales tostados y molidos conocido como gofio, que ya era consumido por los primeros habitantes de las islas. Se considera como un alimento seguro por su baja humedad y por alcanzar temperaturas de 130ºC durante su elaboración. Sin embargo, puede contener sustancias tóxicas conocidas como micotoxinas y, por otro lado, es posibl...

  7. EL HÁNDICAP DEL TRANSPORTE AÉREO PARA EL DESARROLLO INICIAL DEL TURISMO DE MASAS EN LAS ISLAS CANARIAS

    Directory of Open Access Journals (Sweden)

    José Ángel Hernández Luis

    2011-01-01

    Full Text Available El transporte aéreo, más aún en un territorio fragmentado y alejado como es el caso del Archipiélago canario, ha jugado un papel trascendental para el desarrollo del turismo de masas en los años sesenta y setenta. En efecto, sin la llegada del motor a reacción a Canarias, no se podría comprender el espectacular desarrollo turístico que las Islas experimentaron en este periodo, siendo el principal objetivo de este trabajo, abordar -aunque de forma sucinta-, este proceso absolutamente decisivo para las Islas.

  8. The origin of high silicon content in potentially medicinal groundwater of Gran Canaria (Canary Islands, Spain. Modelling of chemical water-rock interactions

    Directory of Open Access Journals (Sweden)

    Dobrzyński, Dariusz

    2012-11-01

    Full Text Available Groundwater of Gran Canaria (Canary Island, Spain have been appreciated and used as an element of health tourism since the 19th Century. This activity was abandoned in the second half of 20th Century when springs disappeared due to groundwater drawdown. The chemistry of groundwater from 19 intakes in volcanic rocks of the north part of Gran Canaria was studied by applying geochemical modelling for quantifying processes responsible for high Si concentrations.Studied groundwater has temperature of 16.3°C–25.5°C, pH of 4.40–7.40, and usually HCO3-(Cl-Mg-Ca-Na hydrochemical types. At near-neutral pH, fresh groundwater usually has 0.1-0.3 mM of Si. In studied groundwater Si concentrations are 0.42 to 1.82 mM, and show positive correlation with ionic strength and temperature. Volcanic bedrocks consist of, generally, easily reactive silicate minerals. Weathering is not supported by low rainfall; however, it shall be intensified by high influx of salts from marine aerosols and lithogenic carbon dioxide into groundwater. Geochemical modelling has found water-mineral reactions which reflect properly diversity of bedrock mineralogy. Based on those chemical reactions, contributions of particular silicate minerals to the pool of silicon dissolved in groundwater were calculated. Understanding the processes responsible for water chemistry might help in proper management and protection of groundwater.The Si-rich waters might be found in numerous places of Gran Canaria in all volcanic rocks. Silicic acid is the only form of silicon which is biologically available, and is regarded as a component which provides balneotherapeutic benefits. Many studies have showed beneficial and essential aspects of silicon in humans. Studied groundwater from Gran Canaria has an unexploited balneotherapeutic potential, and due to very high Si contents they seem to be ideal for testing the health benefits of such waters to humans. Hydrogeochemical methods, including

  9. El patrimonio rupestre de Gran Canaria. Los grabados de la Montaña de Las Vacas (Aldea de San Nicolás

    Directory of Open Access Journals (Sweden)

    Ernesto Martín Rodríguez

    2013-11-01

    Full Text Available Se presentan varias estaciones rupestres inéditas para la investigación, localizadas en el curso de los trabajos arqueológicos llevados a cabo en la Montaña de Hogarzales (Aldea de San Nicolás, Gran Canaria en torno a la explotación de la obsidiana por las comunidades prehistóricas de la isla.One presents rock art unpublished stations for the investigation, located in the course of the archaeological works led to end in Hogarzales's mountain (Village of San Nicolas, Great Canary concerning the exploitation of the obsidian for the prehistoric communities of the island.

  10. Saharan dust and the impact on adult and elderly allergic patients: the effect of threshold values in the northern sector of Gran Canaria, Spain.

    Science.gov (United States)

    Menéndez, Inmaculada; Derbyshire, Edward; Carrillo, Teresa; Caballero, Elena; Engelbrecht, Johann P; Romero, Lidia E; Mayer, Pablo L; Rodríguez de Castro, Felipe; Mangas, José

    2017-04-01

    Gran Canaria Island is frequently impacted by Saharan dust, a health hazard of particular concern to the island population and health agencies. Airborne mineral dust has the severest impact on the higher age groups of the population, and those with respiratory conditions; despite that, on average, the ambient particulate matter (PM) concentrations fall within international PM guidelines. During 2010 and 2011, an epidemiological survey, in parallel with an air quality study, was conducted at the Dr Negrín hospital in Gran Canaria. This included the quarterly monitoring of outpatients and recording of emergency patients with respiratory diseases, together with the measurement of aerosol, meteorological, and PM-related air quality levels. The finer more toxic particles were collected with PM 2.5 (particulate matter with aerodynamic diameter less than 2.5 μm) aerosol samplers. The filter samples were gravimetrically and chemically analyzed for their elemental, water-soluble ions, carbon, and mineralogical contents. Individual particle morphology was measured by Scanning Electron Microscopy. Statistical analysis of the chemical and clinical data included the analysis of variance and calculation of Spearman correlation coefficients. No statistically significant relations were found between the allergic control group, the emergency room admissions, pulmonary conditions, medication, and elevated Saharan dust levels. However, changing environmental conditions, such as an increase in humidity or a reduction in ambient air temperature made a significant difference to the outcomes recorded on the health statements of the allergic and respiratory illness groups of the Gran Canary population.

  11. Contribution of bioanthropology to the reconstruction of prehistoric productive processes. The external auditory exostoses in the prehispanic population of Gran Canaria

    Directory of Open Access Journals (Sweden)

    Velasco Vázquez, Javier

    2001-06-01

    Full Text Available The aim of this paper is an approach to the role of bioanthropological studies in the reconstruction of the productive processes of past societies. This objective is obtained starting from the survey and valuation of the prevalence of bone exostoses in the auditory canal among the prehistoric inhabitants of Gran Canaria. The auditory exostose is a bone wound well documented through clinical and experimental studies, closely related to the exposure of the auditory canal to cold water. The estimation of this bone anomaly among the analysed population, leads to the definition of outstanding territorial variations in the economic strategies of these human groups.

    En el presente trabajo se pretende abordar el papel de los estudios bioantropológicos en la reconstrucción de los procesos productivos de las sociedades del pasado. Esta finalidad es perseguida a partir del examen y valoración de la prevalencia de exostosis óseas en el canal auditivo en la población prehistórica de Gran Canaria. Las exostosis auditivas constituyen una lesión ósea, bien documentada en trabajos experimentales y clínicos, estrechamente relacionada con la exposición del canal auditivo al agua fría. La estimación de esta anormalidad ósea en el conjunto poblacional analizado permite la definición de importantes variaciones territoriales en las estrategias económicas emprendidas por estos grupos humanos.

  12. Presentación de la cohorte "CDC de Canarias": objetivos, diseño y resultados preliminares

    Directory of Open Access Journals (Sweden)

    Antonio Cabrera de León

    2008-01-01

    Métodos: Estudio prospectivo con muestreo aleatorio en población general, en el que participaron 6.729 personas entre los años 2000 y 2005 (edad 18-75 años. Se les realizó antropometría y se extrajo sangre para almacenamiento de muestras séricas y genéticas. Mediante cuestionario se recogió: hábitos dietéticos, actividad física, antecedentes personales y familiares de enfermedad, exposición a FR laborales o ambientales, tabaquismo, etc. Resultados: La prevalencia de obesidad es casi del 30%, sin diferencias entre sexos, pero el sobrepeso afecta más a los varones (45 vs. 33%; p<0'001, los cuales presentan también mayor prevalencia de diabetes (12 vs. 10%; p =0'005, hipertensión (43 vs. 33%; p<0'001, ingesta excesiva de alcohol (13 vs. 2%; p<0'001 y falta de protección solar (46 vs. 18%; p<0'001. En las mujeres es más frecuente la exposición a bajos niveles de colesterol HDL (37 vs. 30%; p<0'001 y al sedentarismo (71 vs. 55%; p<0'001. La exposición a los FR estudiados, entre ellos la pobreza, es mayor en edades avanzadas, salvo el tabaquismo (26% que es mayor en edades jóvenes. La estimación de riesgos relativos de exposición a los factores de riesgo cardiovascular y de cáncer es más alta en las clases sociales pobres. Conclusiones: La actual población adulta de Canarias presenta una elevada prevalencia de exposición a factores de riesgo para las enfermedades cardiovasculares, la diabetes y el cáncer, destacando especialmente el sobrepeso, la obesidad y el sedentarismo.

  13. A long-term retrospective study on rehabilitation of seabirds in Gran Canaria Island, Spain (2003-2013)

    Science.gov (United States)

    Montesdeoca, Natalia; Calabuig, Pascual; Corbera, Juan A.

    2017-01-01

    Aims The aims of this study were to analyze the causes of morbidity and mortality in a large population of seabirds admitted to the Tafira Wildlife Rehabilitation Center (TWRC) in Gran Canaria Island, Spain, from 2003 to 2013, and to analyze the outcomes of the rehabilitation process. Methods We included 1,956 seabirds (133 dead on admission and 1,823 admitted alive) in this study. Causes of morbidity were classified into nine categories: light pollution (fallout), fishing gear interaction, crude oil, poisoning/intoxication, other traumas, metabolic/nutritional disorder, orphaned young birds, other causes, and unknown/undetermined. The crude and stratified (by causes of admission) rates of the three final disposition categories (euthanasia Er, unassisted mortality Mr, and release Rr), the time until death, and the length of stay were also studied for the seabirds admitted alive. Results Yellow-legged Gull (Larus michahellis) was the species most frequently admitted (46.52%), followed by Cory’s Shearwater (Calonectris diomedea borealis) (20.09%). The most frequent causes of morbidity were light pollution (fallout) (25.81%), poisoning/intoxication (24.69%), and other traumas (18.14%). The final disposition rates were: Er = 15.35%, Mr = 16.29%, and Rr = 68.34%. The highest Er was observed in the ‘other traumas’ category (58.08%). Seabirds admitted due to metabolic/nutritional disorder had the highest Mr (50%). The highest Rr was observed in the light pollution (fallout) category (99.20%). Conclusions This survey provides useful information for the conservation of several seabird species. We suggest that at least the stratified analysis by causes of admission of the three final disposition rates, and the parameters time until death and length of stay at the center should be included in the outcome research of the rehabilitation of seabirds. The high release rate for seabirds (68.34%) achieved at the TWRC emphasizes the importance of wildlife rehabilitation

  14. Absolute paleointensities during a mid Miocene reversal of the Earth's magnetic field recorded on Gran Canaria (Canary Islands)

    Science.gov (United States)

    Leonhardt, R.; Soffel, H. C.

    2001-12-01

    An extensive paleointensity study was carried out on an approximately 14.1 Myr old reverse to normal transition of the geomagnetic field. One hundred eighty-eight samples from a mid Miocene volcanic sequence on Gran Canaria (Canary Islands) were subjected to Thellier-type paleointensity determinations. Samples for paleointensity experiments were selected on the basis of high Curie temperatures, low viscosity indexes, and limited variations of the remanence-carrying magnetic content during thermal treatment. A modified Thellier technique, which facilitates the recognition of MD tails and the formation of new magnetic remanences with higher blocking temperatures than the actual heating step, was used on the majority of the samples. The application of this technique proved to be very successful and we obtained reliable paleointensity results for 35% of the 87 sampled lava flows. In general, the intensity of the reversed and normal magnetized parts of the sequence, before and after the transition, is lower than the field intensity expected for the mid Miocene. This observation is very likely related to a long term reduction of the field close to transitions. The mean field intensity after the reversal ( ~ 17 μ T) is about twice the value of that recorded in the rocks prior to the reversal. This observation points at a fast recovery of the dipolar structure of the field after this reversal. Very low paleointensities with values < 5 μ T were obtained during an excursion, preceding the actual transition, and also close to significant changes of the local field directions during the reversal. This is interpreted as non-dipolar components becoming dominant for short periods and provoking a rapid change of local field directions. During the transition 15 successive lava flows recorded similar local field directions corresponding to a cluster of virtual geomagnetic poles close to South America. Chronologically, within this cluster the paleointensity increases from about 9

  15. Gastro-enteritis outbreak among Nordic patients with psoriasis in a health centre in Gran Canaria, Spain: a cohort study

    Directory of Open Access Journals (Sweden)

    Rose Angela MC

    2004-10-01

    Full Text Available Abstract Background Between November 2 and 10, 2002 several patients with psoriasis and personnel staying in the health centre in Gran Canaria, Spain fell ill with diarrhoea, vomiting or both. Patient original came from Norway, Sweden and Finland. The patient group was scheduled to stay until 8 November. A new group of patients were due to arrive from 7 November. Methods A retrospective cohort study was conducted to assess the extent of the outbreak, to identify the source and mode of transmission and to prevent similar problems in the following group. Results Altogether 41% (48/116 of persons staying at the centre fell ill. Norovirus infection was suspected based on clinical presentations and the fact that no bacteria were identified. Kaplan criteria were met. Five persons in this outbreak were hospitalised and the mean duration of diarrhoea was 3 days. The consequences of the illness were more severe compared to many other norovirus outbreaks, possibly because many of the cases suffered from chronic diseases and were treated with drugs reported to affect the immunity (methotrexate or steroids. During the two first days of the outbreak, the attack rate was higher in residents who had consumed dried fruit (adjusted RR = 3.1; 95% CI: 1.4–7.1 and strawberry jam (adjusted RR = 1.9; 95% CI: 0.9–4.1 than those who did not. In the following days, no association was found. The investigation suggests two modes of transmission: a common source for those who fell ill during the two first days of the outbreak and thereafter mainly person to person transmission. This is supported by a lower risk associated with the two food items at the end of the outbreak. Conclusions We believe that the food items were contaminated by foodhandlers who reported sick before the outbreak started. Control measures were successfully implemented; food buffets were banned, strict hygiene measures were implemented and sick personnel stayed at home >48 hours after last

  16. Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on e-Learning (Las Palmas de Gran Canaria, Spain, July 21-24, 2015)

    Science.gov (United States)

    Nunes, Miguel Baptista, Ed.; McPherson, Maggie, Ed.

    2015-01-01

    These proceedings contain the papers of the International Conference e-Learning 2015, which was organised by the International Association for Development of the Information and Society and is part of the Multi Conference on Computer Science and Information Systems (Las Palmas de Gran Canaria, Spain, July 21-24, 2015). The e-Learning 2015…

  17. Geophysical imaging of the lacustrine sediments deposited in the La Calderilla Volcanic Caldera (Gran Canaria Island, Spain) for paleoclimate research

    Science.gov (United States)

    Himi, Mahjoub; Rodríguez-González, Alejandro; Criado, Constantino; Tapias, Josefina C.; Ravazzi, Cesare; Pérez-Torrado, Francisco; Casas, Albert

    2016-04-01

    The discovery of well-preserved maar structures is important not only for studying the eruptive activity and formation of volcanoes, but also for paleoclimate research, since laminated maar lake sediments may contain very detailed archives of climate and environmental history. Maars are a singular type of volcanic structure generated by explosive phreatomagmatic eruptions as a result of interaction between rising magma and groundwater. This kind of structures are characterised by circular craters, often filled with water and/or lacustrine sediments and surrounded by a ring of pyroclastic deposits.Recently a borehole was drilled at the bottom of La Calderilla volcanic complex which penetrated about 8.7 m in its sedimentary sequence and paleobotanical study has supplied the first evidence of paleoenvironmental evolution during the Holocene on the Gran Canaria Island. This survey, however, did not penetrate into the substrate because the total thickness of the sedimentary fill was unknown. Since the age of formation of La Calderilla volcanic complex based on K/Ar dating is about 85,000 years (Upper Pleistocene), the possibility of its sedimentary fill extends beyond of the Holocene is extremely attractive, since, for example, there are few paleoenvironmental data regarding how much the last glaciation that affected the Canary Islands. In these circumstances, the knowledge of the total thickness of the lacustrine sediments is crucial to design a deeper borehole in the next future. Therefore, the subsurface characterisation provided by geophysics is essential for determining thickness and geometry of the sedimentary filling. Multielectrode ERT method was used to obtain five 2-D resistivity cross-sections into La Calderilla volcanic caldera. An Iris Syscal Pro resistivity system with 48 electrodes connected to a 94 m long cable (2m electrode spacing) in Wenner-Schlumberger configuration for an investigation depth of about 20 m. Data quality (q Current injected was

  18. La erupción submarina de La Restinga en la isla de El Hierro, Canarias: Octubre 2011-Marzo 2012

    Directory of Open Access Journals (Sweden)

    Perez-Torrado, F. J.

    2012-06-01

    superior de la corteza oceánica anteriores a la construcción del edificio insular de El Hierro envuelto por una corteza basanítica y después huecas (lava balloons, se han correspondido con una erupción submarina fisural profunda sin que nunca hayan intervenido mecanismos más explosivos tipo surtseyano. La erupción se mantuvo activa durante unos cinco meses, dándose por finalizada en marzo del 2012, convirtiéndose de este modo en la segunda erupción histórica más longeva de Canarias después de la de Timanfaya (1730-36 en Lanzarote. Esta erupción ha supuesto la primera oportunidad en 40 años de gestionar una crisis volcánica en Canarias y de analizar las observaciones e interpretaciones y las decisiones adoptadas, con objeto de mejorar la gestión de futuras crisis volcánicas. El Instituto Geográfico Nacional (IGN se encargó de adquirir y analizar la información sísmica y de deformación durante todo el proceso. Sin embargo, no se dispuso inicialmente de un barco oceanográfico que realizara estudios sistemáticos de la profundidad y progresión de la erupción, así como de toma de muestras de los materiales emitidos (piroclastos y lavas, elementos claves para la determinación de la peligrosidad eruptiva. Estas deficiencias en el seguimiento científico del proceso eruptivo dificultaron en algunos momentos la toma de decisiones de protección civil. El análisis de la crisis ha puesto de manifiesto que, aunque se disponga de una infraestructura técnica adecuada para la detección temprana de crisis eruptivas en el archipiélago, de poco valen las medidas administrativas planificadas sin un seguimiento científico continuo e integrador del proceso eruptivo, abierto a la colaboración científica nacional e internacional.

  19. Análisis del riesgo volcánico asociado al flujo de lavas en Tenerife (Islas Canarias: escenarios previsibles para una futura erupción en la isla

    Directory of Open Access Journals (Sweden)

    Hansen Machín, A.

    2004-12-01

    Full Text Available The spatial and temporal distribution of volcanic eruptions in the Canarian Archipelago are a consequence of their origin and evolution, in response to hotspot activity. Therefore, the probability that eruptive phenomena will occur is greater in the western islands (Tenerife, La Palma and El Hierro, the closest to the hotspot vertex, where hundreds of eruptions have been localized in the last 20.000 years. By contrast, in La Gomera (presently in the volcanic repose stage and in the easterly islands of Gran Canaria, Fuerteventura and Lanzarote (the most distant and oldest, in the post-erosive stage of development, few eruptions, if any, have taken place during this period. Rift structures known as «dorsals» have been defined in the more active westerly islands, where the greater part of the recent volcanic activity has been concentrated. Objective data therefore exist that permit the assessment and zonification of eruptive hazards in the archipelago. In this work the assessment of volcanic hazards in the island of Tenerife is presented, whichare concentrated in the volcanic system formed by the central edifice of Mt. Teide and the Northwest Rift. Numerous radiometric datings (14C and K/Ar and the preparation of detailed digitalized and georeferenced geological mapping (GIS have permitted an initia1 analysis and assessment of the volcanic hazards in this island, which presents the greatest risk of eruptions because of the number of recent eruptions and their complexity, in addition to demographic density.La distribución en el tiempo y el espacio de las erupciones volcánicas en el Archipiélago Canario es consecuencia de su origen y evolución, como respuesta a la actividad de un punto caliente. Por consiguiente, la probabilidad de ocurrencia de fenómenos eruptivos es mayor en las islas occidentales (Tenerife, La Palma y El Hierro, las más próximas a la vertical del punto caliente, donde se han localizado centenares de erupciones en los

  20. Del “mar es de todos” al mar reservado: turistas, poblaciones de pescadores y reservas marinas en Canarias

    Directory of Open Access Journals (Sweden)

    José J. Pascual

    2003-01-01

    Full Text Available Los patrones de desarrollo de las últimas décadas en Canarias y en otras zonas del Estado han originado nuevos usos del espacio marítimo y litoral. Frente a los tradicionales vinculados a la pesca, ahora dominan frecuentemente los turísticos y recreativos. La naturaleza, construida o recreada, se convierte especialmente en los últimos años en un atractivo clave para muchos destinos. En este contexto, las reservas marinas intentan preservar ciertas zonas de especial valor biológico de los excesos de la pesca, a la vez que deberían conjugar los usos turísticos y recreativos a realizar en tales espacios con la conservación de sus valores naturales. En Canarias han constituido uno de los instrumentos claves de la política de conservación y gestión de pesquerías en las áreas costeras de las Islas. Actualmente hay tres en funcionamiento, siguiendo una tendencia cada vez más general en todo el mundo. Pero a la vez que con ellas se controla la extracción de recursos por los profesionales, se impulsan una serie de usos vinculados a determinadas formas de turismo que han generado importantes transformaciones en las poblaciones vinculadas a estas zonas protegidas. Otros impactos inducidos por el turismo o la acuicultura han alterado también sus estrategias económicas o el uso de los espacios tanto en tierra como en el mar

  1. Screening of emerging contaminants and priority substances (2008/105/EC) in reclaimed water for irrigation and groundwater in a volcanic aquifer (Gran Canaria, Canary Islands, Spain).

    Science.gov (United States)

    Estévez, Esmeralda; Cabrera, María del Carmen; Molina-Díaz, Antonio; Robles-Molina, José; Palacios-Díaz, María del Pino

    2012-09-01

    In semiarid regions, reclaimed water can be an important source of emerging pollutants in groundwater. In Gran Canaria Island, reclaimed water irrigation has been practiced for over thirty years and currently represents 8% of water resources. The aim of this study was to monitor contaminants of emerging concern and priority substances (2008/105/EC) in a volcanic aquifer in the NE of Gran Canaria where the Bandama Golf Course has been sprinkled with reclaimed water since 1976. Reclaimed water and groundwater were monitoring quarterly from July 2009 to May 2010. Only 43% of the 183 pollutants analysed were detected: 42 pharmaceuticals, 20 pesticides, 12 polyaromatic hydrocarbons, 2 volatile organic compounds and 2 flame retardants. The most frequent compounds were caffeine, nicotine, chlorpyrifos ethyl, fluorene, phenanthrene and pyrene. Concentrations were always below 50 ng L(-1), although some pharmaceuticals and one pesticide, cholrpyrifos ethyl, were occasionally detected at higher concentrations. This priority substance for surface water exceeded the maximum threshold (0.1 μg L(-1)) for pesticide concentration in groundwater (2006/118/EC). Sorption and degradation processes in soil account for more compounds being detected in reclaimed water than in groundwater, and that some contaminants were always detected in reclaimed water, but never in groundwater (flufenamic acid, propyphenazone, terbutryn and diazinon). Furthermore, erythromycin was always detected in reclaimed water (exceeding occasionally 0.1 μg L(-1)), and was detected only once in groundwater. In contrast, some compounds (phenylephrine, nifuroxazide and miconazole) never detected in reclaimed water, were always detected in groundwater. This fact and the same concentration range detected for the groups, regardless of the water origin, indicated alternative contaminant sources (septic tanks, agricultural practices and sewerage breaks). The widespread detection of high adsorption potential compounds

  2. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  3. Food additives

    Science.gov (United States)

    ... GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Food additives URL of this page: //medlineplus.gov/ency/article/ ...

  4. ESPACIOS TURÍSTICOS, ORDENACIÓN DEL TERRITORIO Y ACTITUDES POLÍTICAS, EL CASO DEL COMPLEJO HOTELERO CERCA VIEJA EN FUENCALIENTE DE LA PALMA (ISLAS CANARIAS. ESPAÑA

    Directory of Open Access Journals (Sweden)

    Carlos Santiago Martín Fernández

    2011-01-01

    Full Text Available El presente artículo describe los nexos o relaciones existentes entre tres aspectos de gran actualidad: el desarrollo inmobiliario-turístico, la ordenación del territorio y las estrategias políticas. Para ello, estudiamos un caso emblemático en Canarias: el proceso de construcción del Resort Cerca Vieja en Fuencaliente, isla de La Palma.

  5. Comentarios sobre Cnemeplatiini Jacquelin du Val, 1861 (Coleoptera, Tenebrionidae de la península Ibérica e islas Canarias

    Directory of Open Access Journals (Sweden)

    Ferrer, J.

    2009-12-01

    Full Text Available The taxonomy and geographic distribution of the Iberian and Canary Islands representatives of the tribe Cnemeplatiini, is established, after study of available types. Several errors in recent papers are corrected. Cnemeplatia laticeps (Wollaston, 1857 described from Madeira, is cited as new record for the isla of La Palma, Canary Islands. Cnemeplatia atropos Costa 1847 is a valid species. Cnemeplatia rufa Tournier, 1874 stat. rest. and C. mouchampsi Español 1948 stat. nov. are considered as valid species and not geographical subspecies of Cnemeplatia atropos Costa, 1847, based on morphology. The name Cnemeplatia rufa Tournier, 1874 has priority over C. atropos africana Kaszab, 1938 syn. nov. Figures of discriminatory characters to identify all European and Northwestern African described species are given.

    La composición taxonómica y distribución geográfica de los representantes de la tribu Cnemeplatiini en la Península Ibérica y Canarias, se establece tras el estudio de los tipos disponibles. Se corrigen varios errores de trabajos recientes. Cnemeplatia laticeps (Wollaston, 1857 descrita de Madeira, se cita como nuevo para la isla de La Palma, Islas Canarias. Cnemeplatia atropos Costa, 1847 es tratado como una especie válida. Cnemeplatia rufa Tournier, 1874 stat. rest. y C. mouchampsi Español 1948 stat. nov. son consideradas como especies válidas, no como subespecies geográficas de Cnemeplatia atropos Costa, 1847, en base a su morfología. El nombre Cnemeplatia rufa Tournier, 1874 tiene prioridad sobre C. atropos africana Kaszab, 1938 syn. nov. Se presentan figuras de los caracteres morfológicos discriminatorios para identificar las diferentes especies descritas de Europa y NO de África.

  6. Caracterización del ambiente atmosférico en Las Palmas de Gran Canaria y Santa Cruz de Tenerife. 2000 a 2004

    Directory of Open Access Journals (Sweden)

    Elena López Villarrubia

    2008-01-01

    Full Text Available Fundamento: El carácter insular de las ciudades de Las Palmas de Gran Canaria y Santa Cruz de Tenerife, su meteorología y la proximidad del continente africano que favorece la llegada de material particulado de origen natural sobre las islas, determinan unas especificidades en su calidad del aire. El objetivo de este artículo es la caracterización de la contaminación atmosférica durante los años 2000 a 2004 como indicador de exposición de los habitantes de estas dos ciudades. Métodos: Se elaboraron los siguientes indicadores de contaminación: promedios de 24 horas de PM10, PM2,5, NO2, SO2 y O3; máximo de las 17 medias móviles octohorarias diarias de O3 y CO; máximo horario diario de SO2, NO2, O3, CO, PM10 y PM2,5. También se calcularon los niveles de la moda gruesa de partículas, como la diferencia entre los valores de PM10 y PM2,5 (PM10-2,5. Se identificaron episodios de intrusión africana. Resultados: En Sta Cruz de TF los promedios de SO2 (14ug/m3N y de O3 (44,4 ug/m3N fueron superiores respecto a los de Las Palmas de GC (8 y 28,3 ug/m3N. Los promedios de NO2 en Las Palmas de GC: 45,8 ug/m3N fueron superiores a los de Sta. Cruz de TF: 30,3 ug/m3N. Debido a las intrusiones africanas, algunos días superaron los 600 ug/m3 de PM10 y los 200 de PM2.5 en ambas ciudades. Conclusiones: Se identifica un patrón de calidad del aire con episodios de polvo mineral africano que en superficie afecta a todas las fracciones granulométricas, una estacionalidad diferente a las ciudades europeas respecto al ozono, así como un patrón de contaminación urbano-industrial en Sta. Cruz de Tf y netamente urbano en Las Palmas de GC. Se hace necesario tener en cuenta estos resultados para analizar su posible impacto sobre la salud de los ciudadanos de las Islas Canarias y establecer sistemas adecuados de vigilancia.

  7. Nutrition and energetics of the canary (Serinus canarius).

    Science.gov (United States)

    Harper, E J; Turner, C L

    2000-07-01

    Canaries appear to be primarily seed-eaters, although there are no reports of their feeding ecology in the wild. In captivity, they are offered seed-based diets, preferring to consume seeds such as canary, rapeseed and millet. The mean daily dry-matter intake ranges from 3 to 4 g, which corresponds to a mean gross energy intake of approximately 70 kJ per bird per day. The efficiency of dietary metabolism is high (0.85), which equates to individual metabolizable energy intakes of 45-75 kJ per bird per day. For a canary of average body weight (22 g) the data can be fitted to a regression equation to predict a requirement of 62 kJ ME per day. This corresponds to published information on the energy requirements of other passerine species, but deviates from the predictive equation for poultry. The digestibility values for protein, fat and carbohydrate are similar to those obtained for the budgerigar, although it is likely that the digestibility coefficient is dependent upon the seed type and alimentary tract lipase and amylase activities. Nutrient requirements of canary chicks have not yet been determined, although recent studies have provided data on the nutrient intakes of developing chicks. The newly-hatched canary chick has a rapid growth rate, achieving 90% of its asymptotic body mass by 11 days of age. Gross energy intake is approximately 3 kJ per day following hatching and by day 10 is equivalent to that of an adult canary. It appears that the protein intake should lie between 16.5 and 21.9% of the diet (as is), with peak intake occurring between 8 and 10 days of age.

  8. La aplicación de la música tradicional canaria en las aulas: un reto didáctico para el profesorado

    Directory of Open Access Journals (Sweden)

    Delgado, José C.

    2005-05-01

    Full Text Available La música tradicional canaria constituye uno de los fenómenos folklóricos más interesantes en cuanto a su diversidad y calidad, y ocupa un lugar importante dentro del panorama musical del estado, no sólo por el número de cantos y bailes que ha aportado al rico y variado folklore musical español, sino también por la cantidad de investigaciones y datos que de ella se han recogido. Son numerosas las razones que justifican el uso de la música tradicional en las aulas, así como los valores que aporta la música de tradición oral y su aplicación con fines didácticos. Los contenidos canarios son esenciales a la hora de estudiar y conocer la cultura universal partiendo del entorno. La mayoría de los géneros musicales canarios nos proporcionan un caudal importante de textos, melodías y danzas que son susceptibles de ser utilizados en el aula. Sin embargo, la aplicación en el aula de la música tradicional constituye un reto para el profesorado de música que se enfrenta muchas veces a un lenguaje desconocido.

  9. Geología y vulcanología de La Palma y El Hierro, Canarias Occidentales

    Directory of Open Access Journals (Sweden)

    Pérez Torrado, F. J.

    2001-12-01

    construction of the El Golfo volcano seems to have taken place after a relatively long period of activity, probably coinciding with the maximum development of the Cumbre Nueva rift on La Palma. The initial subaerial activity at El Golfo was characterised by basaltic lavas that evolved to trachybasalts and trachytes, and finally towards more differentiated eruptive episodes indicative of the terminal state of the volcanic activity of the El Golfo volcano. The excessive growth of this volcano triggered the failure of its north flank, generating the spectacular scarp and present El Golfo depression. Subsequent volcanism, from emission vents arranged in a three-armed rift system (rift volcanism, with ages ranging from 145 ka to 2,500 years, with probably prehistoric eruptions, implies the much more moderate continuation of the earlier predominantly basanitic-tephritic volcanic activity. This period may correspond to that of maximum development of the Cumbre Vieja rift, in the island of La Palma.Las Canarias occidentales, relativamente poco estudiadas hasta hace unos años desde el punto de vista geológico, han aportado sin embargo datos decisivos para la comprensión de muchos de los problemas geológicos más importantes del archipiélago, que posiblemente se hubieran dilucidado más prontamente si su estudio se hubiese comenzado, como en la mayoría de las cadenas de islas volcánicas oceánicas, por su extremo más reciente. Como resumen de sus principales rasgos geológicos evolutivos de ambas islas destacamos las siguientes etapas de desarrollo: Durante el Plioceno se levanta en el extremo occidental del Archipiélago, en la isla de La Palma, un edificio o monte submarino constituido por pillow lavas, pillow brechas e hialoclastitas de composición basáltica, intruido por domos traquíticos, plutones de gabros y una densísima red de diques. Por el efecto de la intensa intrusión magmática y filoniana el edificio submarino sufrió un levantamiento hasta cotas de 1.500 m y

  10. Consideraciones sociojurídicas sobre participación ciudadana y 'democracia abierta': especial referencia a las nuevas perspectivas de profundización democrática en Canarias (Socio-Legal Considerations on Citizen Participation and 'Open Democracy'...

    Directory of Open Access Journals (Sweden)

    Juan Ramón Rodríguez-Drincourt

    2017-12-01

    Full Text Available En los últimos años se ha intensificado en España el desarrollo legislativo y las experiencias reales que pretenden promover la participación de los ciudadanos en la cosa pública. Se trata de propuestas que parten, según los casos, de teóricos, de organizaciones no gubernamentales, foros ciudadanos, asociaciones y evidentemente de los gobiernos, parlamentos y administraciones públicas. Muchas de estas propuestas impulsan una “democracia abierta” como concepto amplio que liga la profundización democrática a nuevas vías de participación ciudadana, transparencia y acceso a la información. Se hace una especial referencia a la Comunidad Autónoma de Canarias que constituye, en lo que toca a su calidad democrática, un caso singular en el universo autonómico. No hay otro caso comparable de déficit democrático. En Canarias el Estatuto de autonomía articuló un sistema electoral injusto y supuestamente transitorio que aún hoy pervive. El artículo refiere los cambios socio-jurídicos que se aprecian en la última década.In recent years the legislation on political participation and transparency was developed and the real experiences that aim to promote the participation of citizens in public affairs. It is proposed to start, as appropriate, theoretical, non-governmental organizations, citizens' forums, associations and obviously governments, parliaments and governments. Many of these proposals drive an "open democracy" as a broad concept that link the democratic deepening to new avenues for citizen participation, transparency and access to information. Additionally, Education and the educational transmission process play a decisive role in the construction of an advanced democracy. Special reference to the Canary Islands that is, in what touches to its democratic quality, a unique case in the Spanish regional universe. There is no other comparable case of democratic deficit. In the Canary Islands, the Statute of Autonomy

  11. Los bienes de interés cultural de Gáldar (Canarias y el conjunto histórico “Plaza de Santiago” (1981-2006

    Directory of Open Access Journals (Sweden)

    Juan Sebastián López García

    2013-10-01

    Full Text Available En 1981, hace veinticinco años, la zona central de Gáldar fue declarada “Conjunto Histórico Artístico” con la denominación de Plaza de Santiago. Sin embargo no era el primer bien cultural que obtenía una distinción de este tipo, ya que Gáldar había sido pionera en 1949 con el yacimiento de El Agujero y La Guancha, primero de los de carácter arqueológico declarado en Canarias, al que seguiría en 1972 la Cueva Pintada. Hasta la década de los setenta prevalecieron los bienes arqueológicos, situación que se modificó en las dos últimas décadas del siglo XX después del reconocimiento de la Plaza de Santiago y su entorno. Junto con edificaciones religiosas también se incluyeron ejemplos de arquitectura doméstica, completándose con algunos yacimientos prehispánicos. Una particular circunstancia fue la declaración en 1993 del pago de Barranco Hondo de Abajo, lo que convertía a Gáldar en el primer municipio de Canarias que contaba con dos conjuntos históricos, siendo éste a la vez el primero de la comunidad autonóma con características rurales. De la relación de los declarados, si exceptuamos la mayoría de los de carácter arqueológico, buena parte son urbanos. Una característica es que se incluyen categorías variadas, incluyendo la existencia de una zona arqueológica junto a un conjunto histórico y varios monumentos (de arquitectura religiosa y doméstica. Este hecho es lógico si se tiene en cuenta la particularidad de Gáldar y su condición de núcleo histórico de superposición.Twenty five years ago, in 1981, the central zone of Galdar was declared an "Historic Artistic Site" with the name of Plaza de Santiago. But this was not the first cultural asset to obtain a distinction of this kind, as Galdar pioneered protection of this kind with the El Agujero and La Guancha site, the first archaeological site declared in the Canary Islands, followed by La Cueva Pintada, in 1972. Archaeological assets prevailed up

  12. Aspectos volcanológicos y estructurales. Evolución petrológica e implicaciones en riesgo volcánico de la erupción de 1730 en Lanzarote. Islas Canarias

    Directory of Open Access Journals (Sweden)

    Soler, V.

    1990-04-01

    Full Text Available The eruption that took place in Lanzarote between 1 September 1730 and 16 April 1736 differs from the normal pattern of the historic (last 500 years volcanism of the Canary Islands. The duration (2.053 days, extension (200 km2, volume of materials emitted (3-5 km3 and the evolution of magmas towards olivine tholeiite compositions are quite unique in the historic trend of volcanism in the Archipelago. However, no specific study has been undertaken until now to attempt its reconstruction. In this work the detailed geologic mapping (on a scale 1: 10.000 of the area was carried out, in addition to a thorough petrologic study and the correlation of data provided by eye witness accounts, one of which is a hitberto unpublished manuscript. The main phases of activity have been differentiated as a function of important changes in the composition of the magmas and of the relationship of tbe eruption with a large (at least 14 km fracture. The petrologic and geochemical study of 51 stratigraphically and temporally well located samples shows significant changes in the magma generation processes and in the internal feeding system of the eruption. Magmas evolve from nepheline basanites to alkali basalts (7 to 12,5 % melting during the initial phase of the eruption and from the second phase onwards from alkali basalts to olivine tholeiites (13 to 20 % melting, at shallower depths. Trace elements analysis indicates the predominant role of partial melting processes. The «anomalous» nature of this eruption in relation to the historic volcanism of the Canaries might be explained by the continuation of the eruption once the initial phase was completed (some 3-5 months, when the magma generation front was raised and placed at ao intermediate depth along a large fracture.La erupción ocurrida en Lanzarote entre elide septiembre de 1730 y el 16 de abril de 1736 es por su duración (2.053 días, extensión (200 km2 y volumen (3-5 km3 de materiales emitidos, y

  13. Prevalence and determinants of the metabolic syndrome among subjects with advanced nondiabetes-related chronic kidney disease in Gran Canaria, Spain.

    Science.gov (United States)

    Boronat, Mauro; Bosch, Elvira; Lorenzo, Dionisio; Quevedo, Virginia; López-Ríos, Laura; Riaño, Marta; García-Delgado, Yaiza; García-Cantón, César

    2016-01-01

    The relationship between the metabolic syndrome and mild chronic kidney disease (CKD) has been extensively studied. This study was aimed to estimate the prevalence and factors associated with the metabolic syndrome among subjects with advanced stages of nondiabetes-related CKD. Study population was composed of incident patients with advanced CKD not related to diabetes in a tertiary hospital from Gran Canaria (Spain) since February 2011 to December 2014. Participants fulfilled a survey questionnaire and underwent physical examination and biochemical evaluation. The sample was composed of 167 subjects (mean age 63.9 ± 13.7 years; estimated glomerular filtration rate 21.9 ± 6.6 mL/min/1.73 m(2)). The prevalence of the metabolic syndrome was 68.9% (65.2% in men and 73.3% in women). Highest rates were observed in groups with chronic interstitial nephropathy (80%), CKD of uncertain etiology (76.7%) and CKD related to vascular causes (76.2%). Subjects with metabolic syndrome were older, had higher values of C-reactive protein and more often reported to have first-degree relatives with diabetes and to be physically inactive. In multivariate analyses, age (OR: 1.034 [CI 95%: 1.004-1.065]; p  =  0.024) and family history of diabetes (OR: 2.550 [1.159-5.608]; p  =  0.020) were independently associated with the metabolic syndrome. The prevalence of the metabolic syndrome among subjects with advanced nondiabetes-related CKD is high, and greater than that observed in general Canarian population of similar age groups. Age and family history of diabetes are the two factors more strongly associated with the metabolic syndrome in this population.

  14. Influencia de la pérdida foliar sobre la cosecha en el cv. Gruesa, Musa acuminata Colla (AAA, cultivado bajo invernadero en las Islas Canarias

    Directory of Open Access Journals (Sweden)

    Juan Cabrera Cabrera

    2010-12-01

    Full Text Available El cultivo de la variedad de platanera Gruesa, selección local de Dwarf Cavendish, ha experimentado un importante aumento en los últimos años en las Islas Canarias, tanto al aire libre como bajo invernadero. La eliminación de hojas, tras la floración, es una práctica habitual en los cultivos bajo invernadero. Asimismo es frecuente la pérdida de hojas por el efecto de los vientos en los cultivos al aire libre. El objetivo de este trabajo es evaluar, mediante simulación de pérdida foliar por daños mecánicos, la influencia que tiene la disminución de superficie foliar sobre el llenado y cosecha de la fruta en dicho cultivar. Para ello, cuatro meses antes de la cosecha se efectuaron cinco niveles de defoliación: 0%, 25%, 50%, 75% y 100%. Se valoran dos métodos diferentes de defoliación, eliminación de limbo foliar y tronchado de hojas con posterior corte de éstas. Se analizan y presentan datos morfológicos, fenológicos y productivos, así como valoración de la metodología empleada en este trabajo para la simulación de daños. A partir de un 25% de defoliado, equivalente a 7.5 hojas funcionales por planta, se detectaron diferencias significativas con las plantas testigos.

  15. GRANADA, CANARIAS, AMÉRICA: EL USO DE PRÁCTICAS ATERRORIZANTES EN LA PRAXIS DE TRES CONQUISTAS, 1482-1557

    Directory of Open Access Journals (Sweden)

    ANTONIO ESPINO LÓPEZ

    2012-12-01

    Full Text Available Nuestro propósito en este artículo es señalar algunos rasgos afines en los procesos de conquista de Granada, Canarias y América, remarcando cómo el comportamiento militar de los hispanos se basó notablemente en el uso de toda una nómina de prácticas aterrorizantes herederas de los modelos coercitivos propios del imperialismo romano. Por otro lado, esta reflexión sobre la problemática debe conducirnos a otras nuevas, señalando, más que las limitaciones de las crónicas a la hora de abordar tales cuestiones, cómo afrontan estas la narración de la violencia y remarcando una vez más la necesidad de huir de la cosmética de la conquista hispana de las Indias.The aim of this article is to call attention to the related characteristics in the conquest process of Granada, the Canaries and America, highlighting Spanish military behavior, which was mainly based on a wide range of terrifying practices taken from coercive models of the Roman Empire. This analysis of the problem should lead us to new problems, which show us how to deal with the accounts of violence, instead of focusing on the limitations of the chronicles themselves. This in turn also emphasizes the need to escape from the cosmetic image of the Spanish conquest of the Indies.

  16. Análisis geográfico de las actuales relaciones comerciales entre Canarias y Marruecos / Geographic analysis of commercial relations between the Canary Islands and Morocco

    Directory of Open Access Journals (Sweden)

    Ramón Díaz Hernández

    2014-12-01

    Full Text Available En este trabajo formulamos como hipótesis de partida que Canarias, como frontera meridional de Europa, en un contexto de creciente internacionalización, tiene en los mercados africanos una gran baza histórica que desempeñar. Dado el interés general que este asunto suscita entre las ciencias sociales, se requiere abordarlo desde el análisis geográfico. Para cumplimentar este estudio se emplearon las estadísticas que ofrecen organismos oficiales como el Instituto Nacional de Estadística, Instituto Canario de Estadística, Agencia Estatal de la Administración Tributaria, Instituto de Comercio Exterior y entidades internacionales como la Conferencia de las Naciones Unidas para el Comercio y el Desarrollo (UNCTAD y la Organización Mundial del Comercio (OCM.In this work we formulate the hypothesis that the Canary Islands, as Europe’s southern border, must develop an important role in African markets, in a context of increasing internationalization. Because of the general interest in this issue within the social sciences, to address it from the geographic analysis is required. This study is based, on the one hand, on statistics provided by Spanish government agencies such as the National Statistics Institute, the Canary Institute of Statistics, the State Tax Administration Agency and the Institute of Foreign Trade and, on the other hand, by international entities such as the United Nations Conference for Trade and Development (UNCTAD and the World Trade Organization (WTO.

  17. FILTER-INDUCED BIAS IN Lyα EMITTER SURVEYS: A COMPARISON BETWEEN STANDARD AND TUNABLE FILTERS. GRAN TELESCOPIO CANARIAS PRELIMINARY RESULTS

    Energy Technology Data Exchange (ETDEWEB)

    De Diego, J. A.; De Leo, M. A. [Instituto de Astronomía, Universidad Nacional Autónoma de México Avenida Universidad 3000, Ciudad Universitaria, C.P. 04510, Distrito Federal (Mexico); Cepa, J.; Bongiovanni, A. [Instituto de Astrofísica de Canarias, E-38205 La Laguna, Tenerife (Spain); Verdugo, T. [Centro de Investigaciones de Astronomía (CIDA), Apartado Postal 264, Mérida 5101-A (Venezuela, Bolivarian Republic of); Sánchez-Portal, M. [Herschel Science Centre (HSC), European Space Agency Centre (ESAC)/INSA, Villanueva de la Cañada, Madrid (Spain); González-Serrano, J. I., E-mail: jdo@astro.unam.mx [Instituto de Física de Cantabria (CSIC-Universidad de Cantabria), E-39005 Santander (Spain)

    2013-10-01

    Lyα emitter (LAE) surveys have successfully used the excess in a narrowband filter compared to a nearby broadband image to find candidates. However, the odd spectral energy distribution (SED) of LAEs combined with the instrumental profile has important effects on the properties of the candidate samples extracted from these surveys. We investigate the effect of the bandpass width and the transmission profile of the narrowband filters used for extracting LAE candidates at redshifts z ≅ 6.5 through Monte Carlo simulations, and we present pilot observations to test the performance of tunable filters to find LAEs and other emission-line candidates. We compare the samples obtained using a narrow ideal rectangular filter, the Subaru NB921 narrowband filter, and sweeping across a wavelength range using the ultra-narrow-band tunable filters of the instrument OSIRIS, installed at the 10.4 m Gran Telescopio Canarias. We use this instrument for extracting LAE candidates from a small set of real observations. Broadband data from the Subaru, Hubble Space Telescope, and Spitzer databases were used for fitting SEDs to calculate photometric redshifts and to identify interlopers. Narrowband surveys are very efficient in finding LAEs in large sky areas, but the samples obtained are not evenly distributed in redshift along the filter bandpass, and the number of LAEs with equivalent widths <60 Å can be underestimated. These biased results do not appear in samples obtained using ultra-narrow-band tunable filters. However, the field size of tunable filters is restricted because of the variation of the effective wavelength across the image. Thus, narrowband and ultra-narrow-band surveys are complementary strategies to investigate high-redshift LAEs.

  18. FILTER-INDUCED BIAS IN Lyα EMITTER SURVEYS: A COMPARISON BETWEEN STANDARD AND TUNABLE FILTERS. GRAN TELESCOPIO CANARIAS PRELIMINARY RESULTS

    International Nuclear Information System (INIS)

    De Diego, J. A.; De Leo, M. A.; Cepa, J.; Bongiovanni, A.; Verdugo, T.; Sánchez-Portal, M.; González-Serrano, J. I.

    2013-01-01

    Lyα emitter (LAE) surveys have successfully used the excess in a narrowband filter compared to a nearby broadband image to find candidates. However, the odd spectral energy distribution (SED) of LAEs combined with the instrumental profile has important effects on the properties of the candidate samples extracted from these surveys. We investigate the effect of the bandpass width and the transmission profile of the narrowband filters used for extracting LAE candidates at redshifts z ≅ 6.5 through Monte Carlo simulations, and we present pilot observations to test the performance of tunable filters to find LAEs and other emission-line candidates. We compare the samples obtained using a narrow ideal rectangular filter, the Subaru NB921 narrowband filter, and sweeping across a wavelength range using the ultra-narrow-band tunable filters of the instrument OSIRIS, installed at the 10.4 m Gran Telescopio Canarias. We use this instrument for extracting LAE candidates from a small set of real observations. Broadband data from the Subaru, Hubble Space Telescope, and Spitzer databases were used for fitting SEDs to calculate photometric redshifts and to identify interlopers. Narrowband surveys are very efficient in finding LAEs in large sky areas, but the samples obtained are not evenly distributed in redshift along the filter bandpass, and the number of LAEs with equivalent widths <60 Å can be underestimated. These biased results do not appear in samples obtained using ultra-narrow-band tunable filters. However, the field size of tunable filters is restricted because of the variation of the effective wavelength across the image. Thus, narrowband and ultra-narrow-band surveys are complementary strategies to investigate high-redshift LAEs

  19. Canary literature and culture in the reign of Carlos IV (1788-1808 La literatura y la cultura canaria durante el reinado de Carlos IV (1788-1808

    Directory of Open Access Journals (Sweden)

    Victoria GALVÁN GONZÁLEZ

    2012-01-01

    Full Text Available This work wants to offer a short view of the literature and culture developed in the Canary Isles during the reign period of Charles IV, from a general point of view. Therefore, I cannot offer a detailed perspective of each of the aspects dealt with. This way, what is tackled in this work is a revision of the socio-cultural activities connected to the gatherings or to the economic societies, the educative circumstances, the activity developed by the bishops with the carrying out of facilities or with a reforming teaching at the reading level, such as Tavira, the production of books with an allusion to the printing activity, the most developed literary genres and their authors, the topic preference in poetry —majority genre—, in prose and in theatre, and an allusion to some of the private libraries.Este trabajo quiere ofrecer un panorama sintético de la literatura y la cultura desarrollada en Canarias durante el reinado de Carlos IV, atendiendo a sus trazos generales. No puede ofrecer, por tanto, una atención detenida de cada uno de los aspectos abordados. Así se hace una revisión de las actividades socioculturales ligadas a las tertulias o a las sociedades económicas, las circunstancias educativas, la actividad desplegada por los obispos con la realización de infraestructuras o con un magisterio reformista en el plano de las lecturas, como Tavira, la producción de libros con alusión a la actividad impresora, los géneros literarios más cultivados y sus autores, las preferencias temáticas en poesía —género mayoritario—, en prosa y en teatro, y alusión a algunas de las bibliotecas particulares.

  20. Los paisajes actuales y del pasado de un espacio de montaña volcánica: la Reserva Natural Especial del Chinyero (Tenerife, Islas Canarias

    Directory of Open Access Journals (Sweden)

    Esther Beltán Yanes

    2017-01-01

    Full Text Available La Reserva Natural Especial del Chinyero se localiza al noroeste de Tenerife a una altitud entre 600 y 1.550 msnm. Este espacio protegido ofrece hoy un excepcional paisaje natural integrado por volcanes recientes e históricos de morfología estromboliana, colonizados por bosques de pino canario. Sin embargo, en la reserva se descubren huellas de otros paisajes del pasado que respondían a una original convivencia de la población con los volcanes y bosques de este sector. Este trabajo tiene por objetivo el estudio del paisaje de este paraje natural con el fin de identificar y caracterizar los rasgos de su fisonomía actual, pero también recuperar otros paisajes olvidados de estas montañas. Hoy las prioridades en su protección y gestión sólo se fundamentan en sus valores naturales La restauración de estas antiguas fisonomías desvelará el importante contenido cultural que además poseen estos paisajes, pues constituían el mejor reflejo de lo que era un apro- vechamiento racional de los escasos recursos naturales. Este trabajo se centra en el estudio del paisaje a través del análisis de la relación espacial de sus componentes y la importancia relativa de éstos en la configuración de una imagen exclusiva de la montaña canaria, prestando especial énfasis en su evolución.

  1. Niveles, composición y origen del material particulado atmosférico en los sectores Norte y Este de la Península Ibérica y Canarias

    OpenAIRE

    Viana Rodríguez, María del Mar

    2003-01-01

    El creciente interés existente en la actualidad por la investigación en el campo del material particulado atmosférico se debe a la identificación de efectos adversos de este contaminante sobre la salud y los ecosistemas. El principal objetivo de este trabajo de investigación es evaluar los niveles, composición y origen del material particulado atmosférico en tres zonas seleccionadas de España: el País Vasco, el sector mediterráneo (Cataluña y Valencia) y Canarias. Para ello, se pretende obten...

  2. Frecuencia de los formantes de las vocales medias en sílaba final de palabra con elisión de -/s/: un estudio con materiales de la norma culta de Las Palmas de Gran Canaria

    OpenAIRE

    Pérez Martín, Ana María; Troya Déniz, Magnolia

    2012-01-01

    [ES]El propósito de este artículo es comprobar si la supresión de -/s/ final de palabra condiciona la articulación de las vocales medias pronunciadas por hablantes con estudios universitarios de Las Palmas de Gran Canaria. Para ello, no solo se calculan las frecuencias de los formantes de /e/ y /o/ y se establecen sus campos de dispersión, sino que, además, se examina si la información gramatical de la consonante elidida o los factores sexo y edad pueden influir en la altura frecuencial de lo...

  3. La ordenación territorial, urbanística y de los espacios naturales protegidos y el modelo territorial en la Comunidad Autónoma de Canarias (1982-2009

    Directory of Open Access Journals (Sweden)

    Juan M. Parreño Castellano

    2010-01-01

    Full Text Available Los graves problemas territoriales existentes en Canarias han motivado un continuo desarrollo normativo autonómico desde los ochenta que culminó con la aprobación en 2000 de un Texto Refundido de las leyes de ordenación del territorio en el que se intentó estructurar jerárquicamente la ordenación territorial, el planeamiento urbanístico y la protección de los espacios naturales. Además de dotarse con instrumentos propios de ordenación, la presente década se ha caracterizado por la definición normativa de un modelo de desarrollo sostenible a través de la formulación de unas Directrices de ordenación. En este artículo abordamos el análisis de las características de la ordenación territorial en Canarias y del modelo de desarrollo promulgado, con el fin de manifestar su escasa capacidad de intervención al mismo tiempo que aportamos una reflexión sobre las nuevas orientaciones anti-cíclicas aprobadas recientemente y que pueden suponer el desmoronamiento de parte del modelo de desarrollo construido en la presente década.

  4. Ácaros Mesostigmata (Acari, Mesostigmata de hábitats seleccionados de La Gomera (islas Canarias, España

    Directory of Open Access Journals (Sweden)

    Moraza, M. L.

    2005-06-01

    Full Text Available The study of 47 samples from different habitats on La Gomera (Canary Islands, reveals 43 species representing 13 families from the order Mesostigmata. Most species were members of the families Ascidae (11 species and Laelapidae (9, followed by Macrochelidae and Pachylaelapidae (7 species. The most abundant species (abundance of 9% or greater found in the collected material are: Gamasiphis pulchellus (Berlese, 1887, Gamasellodes bicolour (Berlese, 1918, Veigaia planicola Berlese, 1892 and Pseudoparasitus dentatus (Halbert, 1920. The species found in the largest number of samples were Uropoda misella (Berlese, 1916 and G. bicolour (21%, V. planicola (19% and Holoparasitus Oudemans sp. (17%. Fayal-heather and laurisilva, with 36 species, provided the most diverse habitat; 9 species are associated with Erica arborea L., 9 species with Geranium canariensis Reut. and 9 with Sideritis lotsyi (Pitard.

    Como resultado del estudio de 47 muestras recogidas en diferentes hábitats de la isla de La Gomera (Islas Canarias, se obtuvieron 43 especies pertenecientes a 13 familias del orden Mesostigmata. Las familias Ascidae y Laelapidae son las mejor representadas, con 11 y 9 especies respectivamente, seguidas de Macrochelidae y Pachylaelapidae con 7. Las especies más abundantes (abundancia mayor o igual al 9% en el material recolectado son: Gamasiphis pulchellus (Berlese, 1887, Gamasellodes bicolor (Berlese, 1918, Veigaia planicola Berlese, 1892 y Pseudoparasitus dentatus (Halbert, 1920. Las especies más frecuentes (por aparecer en el mayor número de muestras son Uropoda misella (Berlese, 1916 y G. bicolor (21%, V. planicola (19% y Holoparasitus Oudemans sp. (17%. El fayal-brezal y laurisilva (monteverde, con 36 especies, es el hábitat más diverso; 9 especies se asocian a Erica arborea L., 9 a

  5. La erupción y el tubo volcánico del Volcán Corona (Lanzarote, Islas Canarias

    Directory of Open Access Journals (Sweden)

    Láinez, A.

    2003-12-01

    Full Text Available The island of Lanzarote, located at the eastem, oldest edge of the Canarian hotspot island-chain, has very sparse Holocene rejuvenation volcanism, possibly restricted to the 1824 and 1730 eruptions, ir1 agreement with the mature post-erosional stage of the island. The dating of the Corona Volcano, possibly the most recent eruptive event in the island before the historic eruptions, gives a mean 40Ar/.i9Ar age of 21 f 6.5 ka. This age agrees with the geological observations and the study of the Corona Volcano, particularly the large lava tube (7.6 km long, up to 25 m in diameter formed in the initial stages of the eruption. The last 1.6 km of' this lava tube are at present submerged, ending at a depth of at least 80 m below the present sea level. Our interpretation is that the active lava tube could not have reached that depth and, therefore, the submerged part of the tube formed as the lava flowed on a coastal platform at least 1.6 km wider and at least 80 m below the present sea level, a circumstance that could only have been possible coinciding with a period of low sea-leve1 stand related to a maximum glacial, most probably the last one, at about 20 ka. The subsequent rise in sea level left the coastal platform and the end of the lava tube submerged. The age of the Corona Volcano eruption is constrained by the radioisotopic determinations in 21 + 6.5 ka and, concordantly, by the low sea-leve1 stand recorded between about 18 and 21 ka. The Corona Volcano eruption and lava tube therefore provide clear evidence of changes in sea level in the Canaries in relation to glaciations, and establish important constraints in the volcanic history of the island of Lanzarote.La isla de Lanzarote, situada en el extremo oriental de la alineación del punto caliente de las Canarias, ha tenido escasa actividad eruptiva de rejuvenecimiento en el Holoceno, posiblemente reducida a las erupciones de 1730 y 1824, hecho que concuerda con el avanzado estado post

  6. En la población Canaria, la función de Framingham estima mejor el riesgo de mortalidad cardiovascular que la función SCORE Framingham function estimates the risk of cardio vascular mortality more effectively than SCORE function in the population of the Canary Islands (Spain

    Directory of Open Access Journals (Sweden)

    Antonio Cabrera de León

    2009-06-01

    Full Text Available Objetivos: Comparar la estimación de eventos cardiovasculares fatales con las funciones de Framingham y SCORE, además de explorar su capacidad para detectar el riesgo aportado por factores no incluidos en sus ecuaciones: sedentarismo, obesidad, perímetro abdominal, razón abdomen/estatura, razón abdomen/pelvis y consumo excesivo de alcohol. Métodos: Estudio transversal de 5.289 personas, de 30 a 69 años de edad, obtenidas por muestreo aleatorio en la población general de Canarias. Se calibraron las funciones de Framingham y SCORE, y se estimó su concordancia. Se obtuvo, para estas edades, la tasa poblacional de mortalidad cardiovascular y se confrontó con el riesgo predicho por las funciones. Resultados: En los hombres, la tasa de mortalidad por 100.000 habitantes fue de 67,4, en tanto que la estimación de Framingham, SCORE-Low y SCORE-High fue de 80, 140 y 270, respectivamente. En las mujeres, frente a una tasa de 19,3, la estimación fue de 30, 50 y 70, respectivamente. Ambas funciones detectaron el incremento del riesgo aportado por los factores estudiados, con la excepción, en las mujeres, del sedentarismo con SCORE y del consumo excesivo de alcohol con ambas funciones. En los hombres, tomando para Framingham los puntos de corte de >12%, >15% y >20%, la concordancia con SCORE-Low produjo una Kappa de 0,6, 0,7 y 0,5, respectivamente. Conclusiones: La función de Framingham estimó mejor las tasas de mortalidad que la función SCORE. Únicamente la función de Framingham detectó en ambos sexos el riesgo cardiovascular aportado por el sedentarismo. En Canarias recomendamos la aplicación de la función de Framingham calibrada.Introduction: To compare the performance of the Framingham and SCORE functions to estimate fatal cardiovascular events. In addition, we explored the ability of both functions to detect the risk contributed by factors not included in their equations: sedentariness, obesity, abdominal circumference, abdomen

  7. Consumo de oxígeno en hipotermia, durante circulación extracorpórea, en cirugías de niños con cardiopatías congénitas complejas en Canarias: perfiles cinéticos e implicaciones fisiológicas

    OpenAIRE

    García Mendieta, Jorge Saúl

    2016-01-01

    Programa de doctorado: Avances en Medicina Interna. La fecha de publicación es la fecha de lectura [ES]El presente estudio intenta demostrar que hay diferentes perfiles cinéticos de la relación consumo de oxígeno y temperatura corporal, durante la circulación extracorpórea e hipotermia (CEC-Hp) en niños operados por cardiopatías congénitas complejas en Canarias.

  8. Validación de un cuestionario de frecuencia de consumo de alimentos adaptado para el estudio y seguimiento de la población adulta de las Islas Canarias

    Directory of Open Access Journals (Sweden)

    Armando Aguirre-Jaime

    2008-01-01

    Full Text Available Fundamento: Registrar los hábitos alimenticios exige de un método válido y fiable. El objetivo del estudio es validar el cuestionario de frecuencia de consumo de alimentos CDCFFQ, que es una adaptación de otro cuestionario, para estudiar la alimentación de la población adulta de Canarias. Métodos: El cuestionario CDC-FFQ fue administrado a 1.067 personas de la población general (PG y a 106 estudiantes universitarios (EU, de 19 a 30 años. El segundo grupo fue encuestado también sobre tres recordatorios de 24 horas. Se comparan los nutrientes según CDC-FFQ en PG y EU. Se estiman las correlaciones entre CDC-FFQ y los recordatorios para nutrientes y grupos de alimentos, y la concordancia de consumos de nutrientes y grupos de alimentos en los quintiles extremos, para los estudiantes universitarios. Resultados: Los valores medios entre nutrientes del CDC-FFQ entre PG, EU y población general con estudios universitarios no mostraron diferencias significativas excepto para la vitamina B12 (p=0.004 y la vitamina D (p=0,005. Entre el CDC-FFQ y la media de los tres recordatorios se obtuvieron correlaciones en el rango de 0,202-0,601 entre nutrientes ajustados por calorías consumidas para los estudiantes universitarios. Por grupos de alimentos las correlaciones oscilaron para CDC-FFQ y los recordatorios entre 0,243- 0,542. La concordancia de nutrientes osciló entre 39% y 100% y para grupos de alimentos entre 41% y 100%. Conclusiones: El cuestionario CDC-FFQ resulta válido para clasificar a los sujetos en los rangos relativos de su nivel de ingesta de alimentos y nutrientes, por lo que podría ser útil en estudios epidemiológicos con valoración de dieta en población canaria adulta.

  9. Aplicación de técnicas de teledetección al estudio de la turbidez de las aguas litorales en la costa oriental de Gran Canaria mediante un modelo teórico

    Directory of Open Access Journals (Sweden)

    Juan Francisco Hernández Bartolomé

    2013-11-01

    Full Text Available La creciente presión antrópica sobre los litorales exige de las Administraciones la puesta en marcha de controles, con el fin de conocer —y garantizar— la calidad del medio natural, de tal forma que permitan estimar su deterioro y, en caso necesario, proceder a entablar medidas que posibiliten su salvaguarda. Con ello, además, se garantiza la protección de la sociedad frente a posibles afecciones inducidas por sus propias actividades. Entre los seguimientos que hoy cobran más interés se encuentra el control de la calidad de las aguas costeras, labor que se realiza, normalmente, mediante técnicas de muestreo y análisis sistemático de componentes. En este campo, las técnicas de Teledetección posibilitan un mejor y más exacto seguimiento, dadas las resoluciones de los sensores situados a bordo de plataformas espaciales. Siguiendo esta línea, este estudio pretende mostrar las posibilidades de estas técnicas, aplicando para ello un método de trabajo basado en un modelo teórico, que permite extraer los principales rasgos de un episodio de turbidez en la costa oriental de Gran Canaria.The growing human activities on the coastal zones, cause to the Civil Services to take necessaries controls to know the quality of the environment, to estimate their damage, and if necessary, to establish steps to protect them; and also to protect the human societies from hypothetical illness induced by themselves. Among the more used controls today, the quality of coastal waters has got special interest, work usually made by systematic analysis of samples taken along the studies zones. In this field, remote sensing techniques guarantee a better and more exact control, due to the resolutions of sensors aboard space platforms. In this line, this study try to show the possibilities of these techniques, applying a work method based on a theoretical model, which allows us to extract the principal features of a turbidity episode in the eastern coast of Gran

  10. Evolución de la mortalidad y de los años de vida perdidos prematuramente relacionados con el consumo de alcohol en las Islas Canarias (1980-1998

    Directory of Open Access Journals (Sweden)

    Bello L.M.

    2003-01-01

    Full Text Available Objetivo: Describir la mortalidad y los años de vida perdidos prematuramente (AVPP relacionados con el alcohol en las Islas Canarias durante el período 1980-1998. Métodos: Las defunciones por edad, sexo y causa desde 1980 a 1998 se obtuvieron del Instituto Nacional de Estadística (Movimiento Natural de la Población. Se calculó la proporción de muertes relacionadas con el alcohol para cada año, sexo y grupo de edad a partir de la fracción atribuible poblacional propuesta por los Centers for Disease Control (Estados Unidos. Para cada categoría diagnóstica, los años de vida perdidos prematuramente relacionados con el alcohol fueron calculados multiplicando las defunciones por la fracción poblacional en grupos quinquenales de edad para ambos sexos hasta la edad de 65 años. Resultados: Durante el período 1980-1998, el número de fallecimientos por causas relacionadas con el alcohol fue de 12.614, con un promedio del 6,4% anual y una razón varón/mujer de aproximadamente 2:1. Las neoplasias malignas, las enfermedades digestivas y los accidentes no intencionales relacionados con el alcohol presentan las mayores tasas de mortalidad y de AVPP tanto en varones como en mujeres; en particular, los accidentes no intencionales generan AVPP por encima de las otras causas, lo que supone el 50,6% del total de AVPP por causas relacionadas con el alcohol en varones y el 55,5% en mujeres. Durante el período de estudio, la cirrosis hepáticas y otras enfermedades crónicas del hígado (CIE 571 van decreciendo paulatinamente en los varones y se mantienen en las mujeres. Conclusiones: En el ámbito y período de estudio (Islas Canarias, 1980-1998, se ha observado que el porcentaje de fallecidos por causas relacionadas con el alcohol es elevado, incluyendo la mortalidad por cirrosis hepática. Por tanto, sería necesario potenciar el desarrollo de estrategias educativas y otras dirigidas para controlar su consumo, sobre todo en los jóvenes.

  11. Esas empeñadas luchas a que son muy aficionados los naturales de este país: un acercamiento a la etnicidad a través de la lucha canaria (1840-1943

    Directory of Open Access Journals (Sweden)

    Alonso, Víctor

    2016-06-01

    Full Text Available Sports in general, and traditional sports in particular, make a key contribution to the processes linked to the configuration of any identity. These activities can be studied as a reality «in its own right» (with a certain relative autonomy, as a part of a specific social subject, or as a diacritical social matter that enables us to characterize structures and social processes which, over time, could favour the changes, meanings and visions, whether considered legitimate or maligned, that are contained in these practices. This article deals with the traditional sport of lucha canaria [Canary-island wrestling], which has proved a revealing historical construct, to the extent that this popular game turned sports discipline underwent intense transformation during the 19th and early- 20th centuries. Its analysis provides an insight into the different social meanings, supports and principles associated with this activity, revealing a complex space of relations where the indigenous Guanche, historical tradition and an ongoing link with modernity are particularly relevant. All of this endorses the debate in recent decades in social anthropology and the social sciences regarding ethnicity, identity and sports.El deporte, y especialmente los deportes tradicionales, son una contribución de primer orden a los procesos de construcción identitaria. Puede ser estudiado como realidad «en sí» (dotada de relativa autonomía, al modo de un campo social específico, o bien en modo de diacrítico social que permite caracterizar unas estructuras y procesos sociales que, a lo largo del tiempo, favorecen las transformaciones, sentidos y visiones legitimadas o denostadas contenidas en las prácticas. Este artículo trata la lucha canaria, un deporte tradicional que se manifiesta como constructo histórico revelador, al tratarse de un juego popular deportivizado que vive una intensa transformación a lo largo del siglo XIX y las primeras décadas del XX. Su

  12. Additions to the flora of Tenerife (Canary Islands, Spain

    Directory of Open Access Journals (Sweden)

    Verloove, F.

    2011-12-01

    Full Text Available Additions to the flora of Tenerife (Canary Islands, Spain.- Recent fieldwork in Tenerife, especially in September 2010, yielded several interesting new records of non-native vascular plants. Bothriochloa ischaemum var. songarica, “Asian” Cardamine flexuosa, Cestrum parqui, Digitaria violascens, Ficus lyrata, Ficus rubiginosa, Hoffmannseggia glauca, Hyparrhenia rufa subsp. altissima, Jacaranda mimosifolia, Merremia tuberosa, Passiflora morifolia, Phytolacca dioica, Schefflera actinophylla and Solanum abutiloides are reported for the first time from the Canary Islands, while Eragrostis barrelieri var. pygmaea, Ficus microcarpa, Ipomoea purpurea, Leucaena leucocephala subsp. glabrata, Sechium edule, Tradescantia zebrina and Turnera ulmifolia are new to the flora of the island of Tenerife. New records of Acacia cyclops, Atriplex suberecta, Heliotropium curassavicum, Paspalum dilatatum, P. notatum, Pluchea ovalis, Pulicaria paludosa, Sclerophylax spinescens and Solanum villosum subsp. miniatum confirm their recent expansion on the island of Tenerife. New records are provided for the recently described Sporobolus copei . Finally, Paspalum vaginatum (hitherto possibly confused with P. distichum and Potentilla indica are confirmed from the island of Tenerife.

    Adiciones para la flora de Tenerife (Islas Canarias, España.- Algunos recientes trabajos de campo en Tenerife, especialmente en Septiembre de 2010, trajeron consigo varias nuevas e interesantes adiciones de plantas vasculares no autóctonas. Bothriochloa ischaemum var. songarica, Cardamine flexuosa “Asiática”, Cestrum parqui, Digitaria violascens, Ficus lyrata, Ficus rubiginosa, Hoffmannseggia glauca, Hyparrhenia rufa subsp. altissima, Jacaranda mimosifolia, Merremia tuberosa, Passiflora morifolia, Phytolacca dioica, Schefflera actinophylla y

  13. EL ABSENTISMO ESCOLAR EN EL MUNICIPIO DE CANDELARIA, TENERIFE, ISLAS CANARIAS (ESPAÑA. RESULTADOS DE UN ESTUDIO INTERDISCIPLINAR DESDE LA PRAXIS DE LA EDUCACIÓN Y EL TRABAJO SOCIAL

    Directory of Open Access Journals (Sweden)

    Juan Manuel Herrera Hernández

    2013-01-01

    Full Text Available El presente artículo analiza los resultados de un estudio sobre la evolución de la incidencia y prevalencia del absentismo escolar en el municipio de Candelaria, Tenerife, Islas Canarias, España, entre los cursos académicos 2008-2011. La relevancia de éste se centra en determinar las variables moduladoras que inciden en la progresión a un nivel micro y macrosistémico del absentismo escolar en este territorio, sin perder de vista el enfoque de género. Asimismo, se arrojan un conjunto de resultados globales, de cara a articular y fortalecer un auténtico diagnóstico psico-socioeducativo, que permita ante la detección de conductas absentistas, activar el protocolo de actuación implementado en esta corporación local, el cual se viene desarrollando en el marco del Programa de Prevención del Absentismo Escolar a nivel municipal. Todo ello, contribuye en la intervención psicosocio-comunitaria a implicar de forma activa y con una visión proactiva a los diferentes actores sociales inmersos en el ámbito socioeducativo, destacando con mayor énfasis, el papel que han de jugar en tan compleja, pero a la vez necesaria tarea, las familias, los docentes y los Servicios Sociales Municipales.

  14. Estimación de la prevalencia del trastorno por déficit de atención con o sin hiperactividad (TDAH en población escolar de la Comunidad Autónoma de Canarias

    Directory of Open Access Journals (Sweden)

    Juan E. Jiménez

    2012-06-01

    Full Text Available Este estudio ha tenido por finalidad determinar la prevalencia del Trastorno por Déficit de Atención con o sin Hiperactividad (TDAH en la Comunidad Autónoma de Canarias, en la población de 6 a 12 años. Para ello, el muestreo utilizado fue polietápico estratificado y proporcional por conglomerados. Los estratos fueron el tipo de colegio, la y el nivel educativo, y los conglomerados fueron los colegios. A partir de una muestra de estudio de 118.467 alumnos escolarizados en centros ordinarios, se obtuvo una muestra al azar de 2.395 alumnos. Se utilizaron las escalas Attention-Deficit/Hiperactivity Disorder Rating Scales IV (ADHD RS-IV modificadas para padres y maestros. Se encontró una tasa global de prevalencia del 4.9%, de los cuales el 3.1% fueron del subtipo inatento, el 1.1% hiperactivo, y el 0.7% combinado. Solo se encontraron diferencias significativas en función del sexo, donde la incidencia fue superior en varones. Las implicaciones educativas y socio sanitarias de los hallazgos encontrados nos sugieren la importancia de llevar a cabo una identificación, diagnóstico y tratamiento temprano, lo que ayudará a que los niños identificados con TDAH puedan desarrollar todo su potencial, y con ello una reducción importante del gasto público.

  15. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  16. [Food additives and healthiness].

    Science.gov (United States)

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  17. Additives in yoghurt production

    Directory of Open Access Journals (Sweden)

    Milna Tudor

    2008-02-01

    Full Text Available In yoghurt production, mainly because of sensory characteristics, different types of additives are used. Each group, and also each substance from the same group has different characteristics and properties. For that reason, for improvement of yoghurt sensory characteristics apart from addition selection, the quantity of the additive is very important. The same substance added in optimal amount improves yoghurt sensory attributes, but too small or too big addition can reduce yoghurt sensory attributes. In this paper, characteristics and properties of mostly used additives in yoghurt production are described; skimmed milk powder, whey powder, concentrated whey powder, sugars and artificial sweeteners, fruits, stabilizers, casein powder, inulin and vitamins. Also the impact of each additive on sensory and physical properties of yoghurt, syneresis and viscosity, are described, depending on used amount added in yoghurt production.

  18. Análisis retrospectivo sobre la utilidad de las herramientas de valoración funcional, en las dolencias lumbares a nivel del ámbito laboral (Regional Canarias de Fremap, Año 2012

    Directory of Open Access Journals (Sweden)

    Alexander Vera Vicuña

    2014-01-01

    Full Text Available Introducción: La lumbalgia o dolor lumbar (DL, constituye uno de los síndromes que provocan más consultas en el sistema sanitario, constituyendo la causa más importante de desembolso compensatorio económico, bien sea por entidades públicas como la Seguridad Social o entidades aseguradoras laborales como las mutuas. Objetivo: Determinar la posible influencia de aplicar las herramientas de valoración funcional (Nedlumb/IBV 1.0 en el seguimiento de los procesos de baja laboral por dolor lumbar, en la disminución en el tiempo de baja por dolencias lumbares, así como el ahorro en los coste por compensación de días de baja laboral. Materiales y métodos: Se realizó un estudio retrospectivo, transversal, determinando el número total de paciente con diagnóstico de Lumbalgia en la Regional Canarias de Fremap en el año 2012, extrapolando el tiempo promedio de duración de nuestras baja por dicha dolencia en Contingencia Profesional (CP, con respecto al grupo II del estudio realizado por Asepeyo en Sant Cugat en 2009, denominando a nuestro grupo de estudio, Grupo-II Fremap (Lumbalgias sin valoración funcional, que se comparó con el grupo I de dicho estudio (Lumbalgias con valoración funcional. Se estudio la correlación entre ambos grupo y si el resultado de la valoración funcional, tiene un valor pronóstico, sobre el período restante de baja posterior, en cuanto a disminución del tiempo de baja o al coste económico de la misma. Resultado: Tras comparar nuestro grupo, Grupo II-Fremap, con el Grupo I, como si se hubiera realizado la valoración funcional con el Nedlumb/IBV 1.0 a los 50 días de la baja, los resultado evidenciaron una reducción total de 758.54 días de baja, que sí se correlacionaban con el ahorro del coste diario de compensación de baja (36.3€/día, se demostraba, que se podía haber conseguido un ahorro de 27.535€ en bajas por CP por patología lumbar en la Regional Canarias en el año 2012. Además, si tambi

  19. Polylactides in additive biomanufacturing.

    Science.gov (United States)

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Transversalidad e impacto de género: de las políticas a los programas. Estudio de caso en las Islas Canarias=Gender mainstreaming and impact: from policies to programs. A case study in the Canary Islands

    Directory of Open Access Journals (Sweden)

    Carmen Ascanio Sánchez

    2017-06-01

    Full Text Available Resumen La transversalidad de género es un concepto ampliamente difundido y defendido que, sin embargo, también ha sido criticado por su ambigüedad y polisemia. Si bien este enfoque debe atravesar los diferentes niveles -desde las políticas a los programas-, la práctica muestra un modelo dual y desarticulado entre, por una parte, los marcos estratégicos y por otro, la puesta en marcha de acciones específicas. A partir de un estudio de caso en las Islas Canarias y de una evaluación de impacto de género (Acogida temprana, se identifican debilidades, oportunidades y contradicciones en la práctica de la transversalidad, mostrando como a través de este tipo de evaluaciones pueden desarrollarse estrategias y herramientas para implementar la articulación entre los niveles.   Abstract  “Gender mainstreaming” is an oft-used, broadly supported term that, however, has also been criticized for being an ambiguous word with multiple meanings. In theory, mainstreaming should cut across all different levels -from policies to programs-, but practice has shown that the model tends to be both dual and disjointed, focusing on strategic frameworks on the one hand and the implementation of specific actions on the other. Using a case study on the Canary Islands and a gender impact assessment (in early childcare, this paper identifies weaknesses, opportunities and contradictions in mainstreaming as it plays out in practice, showing how this type of assessment can be used to develop strategies and tools for linking up the various levels of implementation.

  1. Análisis de la operación y fiabilidad de los recuperadores de energía comerciales basados en cámaras isobáricas instalados en Canarias y estudio de la adaptación de dichos equipos al régimen de operación variable a diferentes escalas

    OpenAIRE

    Arenas Urrea, Sigrid Yurena

    2015-01-01

    Máster Universitario en Eficiencia Energética (SIANI) [ES]La obtención de agua potable a través de procesos de desalación basados en la ósmosis inversa (OI) es una técnica extendida en las Islas Canarias. Sin embargo la OI requiere de un gran consumo de energía, el cual se puede reducir mediante los sistemas de recuperación de energía, contribuyendo a su vez, a reducir los costes de agua producida por metro cúbico. Es por ello ...

  2. La percepción sobre la inclusión del alumnado con discapacidad auditiva en la Educación Secundaria, Educación Superior y enseñanzas de régimen especial en Gran Canaria

    OpenAIRE

    Mesa Suárez, José Luis

    2014-01-01

    Programa de doctorado: Formación del Profesorado. [ES] El objetivo principal de esta tesis doctoral es aportar resultados que permitan un mejor conocimiento de la situación de los estudiantes con discapacidad auditiva en la Educación Secundaria Obligatoria, Ciclos Formativos, Estudios Universitarios y Enseñanzas de Régimen Especial en Gran Canaria. Teniendo en cuenta el incremento de estudiantes con sordera o hipoacusia, que esperan ingresar en estas enseñanzas, se plantea la necesidad de ...

  3. Granulometría, morfometría y mineralogía de polvo atmosférico que entra a la cuenca canaria: evidencia de retención de partículas de hierro en la capa de mezcla

    OpenAIRE

    Jaramillo-Vélez, Alfredo; Menéndez, Inmaculada; Alonso, Ignacio; Mangas, José; Hernández-León, Santiago

    2016-01-01

    El polvo atmosférico juega un papel importante en el clima y en los procesos oceánicos, particularmente la deposición del polvo sahariano es de suma importancia en la corriente canaria debido a que contiene minerales de hierro que actúan como fertilizante del océano. En este trabajo las partículas de polvo fueron caracterizadas mediante granulometría, morfometría y mineralogía, usando procesamiento de imágenes, microscopia electrónica (SEM-EDS). El polvo analizado en este estudio fue generado...

  4. Additive and polynomial representations

    CERN Document Server

    Krantz, David H; Suppes, Patrick

    1971-01-01

    Additive and Polynomial Representations deals with major representation theorems in which the qualitative structure is reflected as some polynomial function of one or more numerical functions defined on the basic entities. Examples are additive expressions of a single measure (such as the probability of disjoint events being the sum of their probabilities), and additive expressions of two measures (such as the logarithm of momentum being the sum of log mass and log velocity terms). The book describes the three basic procedures of fundamental measurement as the mathematical pivot, as the utiliz

  5. Food Additives and Hyperkinesis

    Science.gov (United States)

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  6. Groups – Additive Notation

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2015-06-01

    Full Text Available We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

  7. Groups – Additive Notation

    OpenAIRE

    Coghetto Roland

    2015-01-01

    We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

  8. Alternative additives; Alternative additiver

    Energy Technology Data Exchange (ETDEWEB)

    2007-08-15

    In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations aiming at reducing corrosion or slagging related problems. The following products have been obtained, characterised and evaluated: 1) Brewery draff 2) Danish de-gassed manure 3) Paper sludge 4) Moulding sand 5) Spent bleaching earth 6) Anorthosite 7) Sand 8) Clay-sludge. Most of the above alternative additive candidates are deemed unsuitable due to insufficient chemical effect and/or expensive requirements for pre-treatment (such as drying and transportation). 3 products were selected for full-scale testing: de-gassed manure, spent bleaching earth and clay slugde. The full scale tests were undertaken at the biomass-fired power stations in Koege, Slagelse and Ensted. Spent bleaching earth (SBE) and clay sludge were the only tested additive candidates that had a proven ability to react with KCl, to thereby reduce Cl-concentrations in deposits, and reduce the deposit flux to superheater tubes. Their performance was shown to nearly as good as commercial additives. De-gassed manure, however, did not evaluate positively due to inhibiting effects of Ca in the manure. Furthermore, de-gassed manure has a high concentration of heavy metals, which imposes a financial burden with regard to proper disposal of the ash by-products. Clay-sludge is a wet clay slurring, and drying and transportation of this product entails substantial costs. Spent bleaching does not require much pre-treatment and is therefore the most promising alternative additive. On the other hand, bleaching earth contains residual plant oil which means that a range of legislation relating to waste combustion comes into play. Not least a waste combustion fee of 330 DKK/tonne. For all alternative (and commercial) additives disposal costs of the increase ash by-products represents a significant cost. This is

  9. Model Additional Protocol

    International Nuclear Information System (INIS)

    Rockwood, Laura

    2001-01-01

    Since the end of the cold war a series of events has changed the circumstances and requirements of the safeguards system. The discovery of a clandestine nuclear weapons program in Iraq, the continuing difficulty in verifying the initial report of Democratic People's Republic of Korea upon entry into force of their safeguards agreement, and the decision of the South African Government to give up its nuclear weapons program and join the Treaty on the Non-Proliferation of Nuclear Weapons have all played a role in an ambitious effort by IAEA Member States and the Secretariat to strengthen the safeguards system. A major milestone in this effort was reached in May 1997 when the IAEA Board of Governors approved a Model Protocol Additional to Safeguards Agreements. The Model Additional Protocol was negotiated over a period of less than a year by an open-ended committee of the Board involving some 70 Member States and two regional inspectorates. The IAEA is now in the process of negotiating additional protocols, State by State, and implementing them. These additional protocols will provide the IAEA with rights of access to information about all activities related to the use of nuclear material in States with comprehensive safeguards agreements and greatly expanded physical access for IAEA inspectors to confirm or verify this information. In conjunction with this, the IAEA is working on the integration of these measures with those provided for in comprehensive safeguards agreements, with a view to maximizing the effectiveness and efficiency, within available resources, the implementation of safeguards. Details concerning the Model Additional Protocol are given. (author)

  10. Additive manufacturing of metals

    International Nuclear Information System (INIS)

    Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus

    2016-01-01

    Additive Manufacturing (AM), the layer-by layer build-up of parts, has lately become an option for serial production. Today, several metallic materials including the important engineering materials steel, aluminium and titanium may be processed to full dense parts with outstanding properties. In this context, the present overview article describes the complex relationship between AM processes, microstructure and resulting properties for metals. It explains the fundamentals of Laser Beam Melting, Electron Beam Melting and Laser Metal Deposition, and introduces the commercially available materials for the different processes. Thereafter, typical microstructures for additively manufactured steel, aluminium and titanium are presented. Special attention is paid to AM specific grain structures, resulting from the complex thermal cycle and high cooling rates. The properties evolving as a consequence of the microstructure are elaborated under static and dynamic loading. According to these properties, typical applications are presented for the materials and methods for conclusion.

  11. Additive manufactured serialization

    Science.gov (United States)

    Bobbitt, III, John T.

    2017-04-18

    Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

  12. Causes of Stranding and Mortality, and Final Disposition of Loggerhead Sea Turtles (Caretta caretta) Admitted to a Wildlife Rehabilitation Center in Gran Canaria Island, Spain (1998-2014): A Long-Term Retrospective Study.

    Science.gov (United States)

    Orós, Jorge; Montesdeoca, Natalia; Camacho, María; Arencibia, Alberto; Calabuig, Pascual

    2016-01-01

    The aims of this study were to analyze the causes of stranding of 1,860 loggerhead turtles (Caretta caretta) admitted at the Tafira Wildlife Rehabilitation Center in Gran Canaria Island, Spain, from 1998 to 2014, and to analyze the outcomes of the rehabilitation process to allow meaningful auditing of its quality. Primary causes of morbidity were classified into seven categories: entanglement in fishing gear and/or plastics, ingestion of hooks and monofilament lines, trauma, infectious disease, crude oil, other causes, and unknown/undetermined. Final dispositions were calculated as euthanasia (Er), unassisted mortality (Mr), and release (Rr) rates. Time to death (Td) for euthanized and dead turtles, and length of stay for released (Tr) turtles were evaluated. The most frequent causes of morbidity were entanglement in fishing gear and/or plastics (50.81%), unknown/undetermined (20.37%), and ingestion of hooks (11.88%). The final disposition of the 1,634 loggerhead turtles admitted alive were: Er = 3.37%, Mr = 10.34%, and Rr = 86.29%. Er was significantly higher in the trauma category (18.67%) compared to the other causes of admission. The highest Mr was observed for turtles admitted due to trauma (30.67%). The highest Rr was observed in the crude oil (93.87%) and entanglement (92.38%) categories. The median Tr ranged from 12 days (unknown) to 70 days (trauma). This survey is the first large-scale epidemiological study on causes of stranding and mortality of Eastern Atlantic loggerheads and demonstrates that at least 71.72% of turtles stranded due to anthropogenic causes. The high Rr (86.29%) emphasizes the importance of marine rehabilitation centers for conservation purposes. The stratified analysis by causes of admission of the three final disposition rates, and the parameters Td and Tr should be included in the outcome research of the rehabilitation process of sea turtles in order to allow comparative studies between marine rehabilitation centers around the world.

  13. Causes of Stranding and Mortality, and Final Disposition of Loggerhead Sea Turtles (Caretta caretta Admitted to a Wildlife Rehabilitation Center in Gran Canaria Island, Spain (1998-2014: A Long-Term Retrospective Study.

    Directory of Open Access Journals (Sweden)

    Jorge Orós

    Full Text Available The aims of this study were to analyze the causes of stranding of 1,860 loggerhead turtles (Caretta caretta admitted at the Tafira Wildlife Rehabilitation Center in Gran Canaria Island, Spain, from 1998 to 2014, and to analyze the outcomes of the rehabilitation process to allow meaningful auditing of its quality.Primary causes of morbidity were classified into seven categories: entanglement in fishing gear and/or plastics, ingestion of hooks and monofilament lines, trauma, infectious disease, crude oil, other causes, and unknown/undetermined. Final dispositions were calculated as euthanasia (Er, unassisted mortality (Mr, and release (Rr rates. Time to death (Td for euthanized and dead turtles, and length of stay for released (Tr turtles were evaluated.The most frequent causes of morbidity were entanglement in fishing gear and/or plastics (50.81%, unknown/undetermined (20.37%, and ingestion of hooks (11.88%. The final disposition of the 1,634 loggerhead turtles admitted alive were: Er = 3.37%, Mr = 10.34%, and Rr = 86.29%. Er was significantly higher in the trauma category (18.67% compared to the other causes of admission. The highest Mr was observed for turtles admitted due to trauma (30.67%. The highest Rr was observed in the crude oil (93.87% and entanglement (92.38% categories. The median Tr ranged from 12 days (unknown to 70 days (trauma.This survey is the first large-scale epidemiological study on causes of stranding and mortality of Eastern Atlantic loggerheads and demonstrates that at least 71.72% of turtles stranded due to anthropogenic causes. The high Rr (86.29% emphasizes the importance of marine rehabilitation centers for conservation purposes. The stratified analysis by causes of admission of the three final disposition rates, and the parameters Td and Tr should be included in the outcome research of the rehabilitation process of sea turtles in order to allow comparative studies between marine rehabilitation centers around the world.

  14. BWR zinc addition Sourcebook

    International Nuclear Information System (INIS)

    Garcia, Susan E.; Giannelli, Joseph F.; Jarvis, Alfred J.

    2014-01-01

    Boiling Water Reactors (BWRs) have been injecting zinc into the primary coolant via the reactor feedwater system for over 25 years for the purpose of controlling primary system radiation fields. The BWR zinc injection process has evolved since the initial application at the Hope Creek Nuclear Station in 1986. Key transitions were from the original natural zinc oxide (NZO) to depleted zinc oxide (DZO), and from active zinc injection of a powdered zinc oxide slurry (pumped systems) to passive injection systems (zinc pellet beds). Zinc addition has continued through various chemistry regimes changes, from normal water chemistry (NWC) to hydrogen water chemistry (HWC) and HWC with noble metals (NobleChem™) for mitigation of intergranular stress corrosion cracking (IGSCC) of reactor internals and primary system piping. While past reports published by the Electric Power Research Institute (EPRI) document specific industry experience related to these topics, the Zinc Sourcebook was prepared to consolidate all of the experience gained over the past 25 years. The Zinc Sourcebook will benefit experienced BWR Chemistry, Operations, Radiation Protection and Engineering personnel as well as new people entering the nuclear power industry. While all North American BWRs implement feedwater zinc injection, a number of other BWRs do not inject zinc. This Sourcebook will also be a valuable resource to plants considering the benefits of zinc addition process implementation, and to gain insights on industry experience related to zinc process control and best practices. This paper presents some of the highlights from the Sourcebook. (author)

  15. Teardrop bladder: additional considerations

    International Nuclear Information System (INIS)

    Wechsler, R.J.; Brennan, R.E.

    1982-01-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB

  16. Sewage sludge additive

    Science.gov (United States)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  17. [Susceptibility of birds other than chickens to infectious laryngotracheitis].

    Science.gov (United States)

    Hilbink, F W

    1985-06-01

    Susceptibility to infectious laryngotracheitis virus was studied in peafowl (Pavo cristatus), various species of pheasant (Phasianus colchicus, Lophura swinhoeii, Lophophorus impejanus), guinea-fowl (Numida meleagris), canaries (Serinus canaria), budgerigars (Melopsittacus undulatus) and Japanese quail (Coturnix coturnic japonica). Apart from clinical observations, experiments were evaluated in terms of histopathology, immunofluorescence, serology and recovery of virus. Only peafowl and pheasants were found to be susceptible, pheasants responding more strongly than chickens to ocular vaccination and intratracheal inoculation. The other species were found to be refractory.

  18. Necrópolis de La Cucaracha: único enterramiento con restos humanos asociados a una erupción prehistórica de La Palma (Islas Canarias

    Directory of Open Access Journals (Sweden)

    Pérez Torrado, F. J.

    2002-04-01

    Full Text Available The La Cucaracha site is an important burial ground of archaeological and human remains located in a cavity excavated in the SE flank of Montaña de La Cucaracha volcano, an eruptive vent dated at over 20.000 years. The profusion and diversity of the materials found: pottery shards, stone hand tools and bones, justify the importance of this interment site, although the most significant finding is the presence of human bone fragments embedded in volcanic scoria. The study of this site is focused on identifying the eruptive vent responsible for this event and assessing the incidence of a volcanic eruption on the structure and elemental composition of the recovered osseous materials. For this purpose, radiometric 14C dating has been carried out of the bones affected by the prehistoric eruption in addition to the petrographic and geochemical analysis of the different bone fragments and of the basaltic scoria in which the bone fragments are embedded in relation to the possible surrounding volcanoes. The results obtained point to Montaña Goteras, an eruptive vent close to La Cucaracha volcano, as being responsible for the event, and provide evidence of the preservation of both the mineralogical composition and the crystallographic parameters of the osseous materials. A comparative study reveals significant differences between the bones corresponding to interments and those from cremation ceremonies, the latter showing a marked increase in crystallinity with occasional loss of significative elemental components, variations in contrast to a notable enrichment in trace elements and rare earths undergone by the bone fragments affected by the volcanic eruption. The content in certain oligoelements and SrICa ratios have provided complementary dietary information.El yacimiento de La Cucaracha es un importante enterramiento de restos arqueológicos y humanos situado en una oquedad excavada en el flanco SE del edificio volcánico de la Montaña de La

  19. Observations on two nests of the Black-headed Siskin Serinus ...

    African Journals Online (AJOL)

    Scopus: Journal of East African Ornithology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 32 (2012) >. Log in or Register to get access to full text downloads.

  20. Systematics of Serinus canaries and the status of Cape and Yellow ...

    African Journals Online (AJOL)

    ] canicollis) and Yellow-crowned (S. [c.] flavivertex) canaries (2.8%) was similar to differences between other closely-related species and there are marked plumage differences between these taxa, we suggest that they be elevated to full ...

  1. Additive lattice kirigami.

    Science.gov (United States)

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  2. Additive Manufactured Superconducting Cavities

    Science.gov (United States)

    Holland, Eric; Rosen, Yaniv; Woolleet, Nathan; Materise, Nicholas; Voisin, Thomas; Wang, Morris; Mireles, Jorge; Carosi, Gianpaolo; Dubois, Jonathan

    Superconducting radio frequency cavities provide an ultra-low dissipative environment, which has enabled fundamental investigations in quantum mechanics, materials properties, and the search for new particles in and beyond the standard model. However, resonator designs are constrained by limitations in conventional machining techniques. For example, current through a seam is a limiting factor in performance for many waveguide cavities. Development of highly reproducible methods for metallic parts through additive manufacturing, referred to colloquially as 3D printing\\x9D, opens the possibility for novel cavity designs which cannot be implemented through conventional methods. We present preliminary investigations of superconducting cavities made through a selective laser melting process, which compacts a granular powder via a high-power laser according to a digitally defined geometry. Initial work suggests that assuming a loss model and numerically optimizing a geometry to minimize dissipation results in modest improvements in device performance. Furthermore, a subset of titanium alloys, particularly, a titanium, aluminum, vanadium alloy (Ti - 6Al - 4V) exhibits properties indicative of a high kinetic inductance material. This work is supported by LDRD 16-SI-004.

  3. The reuse of regenerated water for irrigation of a golf course: evolution geochemistry and probable affection to a volcanic aquifer (Canary Islands); La reutilizacion de aguas regeneradas para riego de un campo de golf: evolucion geoquimica y probable afeccion a un acuifero volconico (Islas Canarias)

    Energy Technology Data Exchange (ETDEWEB)

    Cabrera, M. C.; Palacios, M. P.; Estevez, E.; Cruz, T.; Hernandez-Moreno, J. M.; Fernandez-Vera, J. R.

    2009-07-01

    Irrigation reuse of treated urban wastewater presents unquestionable advantages, but recently some possible unfavourable effects that need to be studied in the long term have been detected. The Bandama golf course, located at the NE of Gran Canaria, has been selected to develop an integrated study of the affection on a medium-long term, due to it has been irrigated with reused water for more than 30 years. The characterization of irrigation water, soil, soil lixiviate and aquifer functioning has allowed to obtain preliminary conclusions pointing to the importance of the soil nature, the precipitation, the irrigation management and the hydrogeologic conditions in the soil and aquifer response, In the study area, this is complicated for the existence of about 250 m thick unsaturated zone conformed by volcanic materials where water must flow through fractures, making impossible to be sampled. (Author) 7 refs.

  4. El paisaje como recurso turístico de la ciudad. Una propuesta metodológica para valorar el papel de la planificación del territorio en el caso de Las Palmas de Gran Canaria / The landscape as a city tourism resource. A methodological for assessing...

    Directory of Open Access Journals (Sweden)

    Santiago Hernández Torres

    2014-12-01

    Full Text Available Se propone una metodología para la valoración de las relaciones entre la ciudad, el turismo y la planificación del territorio desde la perspectiva del paisaje y el medio ambiente. Para ello, analizamos como las estrategias de mejora de la competitividad turística de las ciudades tienen su traslación en la planificación urbanística de los ayuntamientos y la relación o integración de los elementos que configuran ambientalmente el espacio urbano. Con este objeto genérico, se selecciona el ejemplo de Las Palmas de Gran Canaria como laboratorio de experiencias de ordenación del espacio, mediante las cuales puede observarse los indicadores y dificultades en el tratamiento de la calidad ambiental. Nos interesa distinguir cómo estos elementos ambientales se planifican como recursos turísticos y la relevancia que tienen en las estrategias públicas de la ordenación del territorio.A methodology is proposed to asses the relations among the city, tourism, and spatial planning from landscape and environmental perspective. To do this, we analyse how strategies to improve touristic competitiveness in the cities can be applied to spatial planning. To this end, the example of Las Palmas de Gran Canaria is selected, as a laboratory of spatial planning experiences, by which the indicators and difficulties in the environmental quality can be observed. We are interested in distinguishing how this environmental elements are planned as tourism resources and their level of importance in spatial planning.

  5. effects of sulphur addition on addition on and mechanical properties

    African Journals Online (AJOL)

    User

    234-8034714355. 8034714355. 1. EFFECTS OF SULPHUR ADDITION ON. ADDITION ON. 2. AND MECHANICAL PROPERTIES O. 3. 4. C. W. Onyia. 5. 1DEPT. OF METALLURGICAL AND MATERIALS. 6. 2, 4DEPT. OF METALLURGICAL ...

  6. ADDITIVES USED TO OBTAIN FOOD

    Directory of Open Access Journals (Sweden)

    Dorina Ardelean

    2012-01-01

    Full Text Available Use of food additives in food is determined by the growth of contemporary food needs of the world population. Additives used in food, both natural and artificial ones, contribute to: improving the organoleptic characteristics and to preserve the food longer, but we must not forget that all these additives should not be found naturally in food products. Some of these additives are not harmful and human pests in small quantities, but others may have harmful effects on health.

  7. Color Addition and Subtraction Apps

    Science.gov (United States)

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  8. How Safe Are Color Additives?

    Science.gov (United States)

    ... Linkedin Pin it Email Print Subscribe: FDA Consumer Health Information Color additives give the red tint to your fruit punch ... in Foods, Drugs, Cosmetics, and Medical Devices Color Additives: FDA's Regulatory Process and Historical Perspectives ... Health Cosmetics Dietary Supplements Drugs Food Medical Devices Nutrition ...

  9. Density measures and additive property

    OpenAIRE

    Kunisada, Ryoichi

    2015-01-01

    We deal with finitely additive measures defined on all subsets of natural numbers which extend the asymptotic density (density measures). We consider a class of density measures which are constructed from free ultrafilters on natural numbers and study a certain additivity property of such density measures.

  10. Prevalence of Food Additive Intolerance

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard

    1994-01-01

    The prevalence estimates vary with a factor 100. As the results vary so do the study populations. 6 If the different study populations are accounted for, a common conclusion can be drawn: Food additive intolerance is found in adults with atopic symptoms from the respiratory tract and skin. The prevalence......1 The existing prevalence estimates of food additive intolerance(1-4) are being reviewed. 2 In the EEC report the estimated frequency of food additive intolerance is 0.03% to 0.15% based on data from patient groups. 3 The British population study results in a prevalence estimate of 0.......026%. The challenged population is 81 children and adults with a history of reproducible clinical symptoms after ingestion of food additives. 4 In the Danish population study a prevalence of 1-2% is found in children age 5-16. In this study a total of 606 children mainly with atopic disease have been challenged. 5...

  11. Topology Optimization for Additive Manufacturing

    DEFF Research Database (Denmark)

    Clausen, Anders

    This PhD thesis deals with the combination of topology optimization and additive man-ufacturing (AM, also known as 3D-printing). In addition to my own works, the thesis contains a broader review and assessment of the literature within the field. The thesis first presents a classification...... of the various AM technologies, a review of relevant manufacturing materials, the properties of these materials in the additively manufactured part, as well as manufacturing constraints with a potential for design optimization. Subsequently, specific topology optimization formulations relevant for the most im...... for scalable manufacturing. In relation to interface problems it is shown how a flexible void area may be included into a standard minimum compliance problem by employing an additional design variable field and a sensitivity filter. Furthermore, it is shown how the design of coated structures may be modeled...

  12. (ICSID) ADDITIONAL FACILITY IN INTERNA

    African Journals Online (AJOL)

    Fr. Ikenga

    ... which is adopted by Article 5 of the Additional Facility Rules to guide the ... B, Barrister at Law, e-mail: kcezeibe@yahoo.com; Phone 08033950631 and .... revision and annulment which are internally available under the Washington ...

  13. Food additives: an ethical evaluation.

    Science.gov (United States)

    Mepham, Ben

    2011-01-01

    Food additives are an integral part of the modern food system, but opinion polls showing most Europeans have worries about them imply an urgent need for ethical analysis of their use. The existing literature on food ethics, safety assessment and animal testing. Food additives provide certain advantages in terms of many people's lifestyles. There are disagreements about the appropriate application of the precautionary principle and of the value and ethical validity of animal tests in assessing human safety. Most consumers have a poor understanding of the relative benefits and risks of additives, but concerns over food safety and animal testing remain high. Examining the impacts of food additives on consumer sovereignty, consumer health and on animals used in safety testing should allow a more informed debate about their appropriate uses.

  14. Wide and High Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-03-01

    The goal of this project is to develop and demonstrate the enabling technologies for Wide and High Additive Manufacturing (WHAM). WHAM will open up new areas of U.S. manufacturing for very large tooling in support of the transportation and energy industries, significantly reducing cost and lead time. As with Big Area Additive Manufacturing (BAAM), the initial focus is on the deposition of composite materials.

  15. Food additives and preschool children.

    Science.gov (United States)

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  16. La planificación territorial de la política de renovación de las áreas turísticas maduras. Planes de Renovación, Mejora e Incremento de la Competitividad de Canarias

    Directory of Open Access Journals (Sweden)

    Moisés Simancas Cruz

    2016-01-01

    Full Text Available La renovación integral del espacio público y privado de las áreas turísticas maduras se plantea como el elemento de articulación de la política turística. Sin embargo, la experiencia acumulada plantea la necesidad de generar escenarios de buena gobernanza del territorio, en detrimento de la implementación de una estrategia de intervención pública por la vía impositiva de la norma. Para ello, la política pública de las Islas Canarias (España ha incorporado un singular y novedoso instrumento de ordenación territorial: los “Planes de Modernización, Mejora e Incremento de la Competitividad”. Se trata de planes ad hoc que, con un carácter excepcional, pretenden convertirse en los mecanismos que, vía convenio urbanístico, deben dar cobertura, viabilizar y agilizar la ejecución eficiente de los proyectos de renovación física de los alojamientos turísticos. Sin embargo, la implementación de estos planes no está exenta de complicaciones, las cuales están reduciendo su eficiencia. El principal objetivo de este trabajo es analizar las debilidades y potencialidades de estos instrumentos, susceptibles de ser aplicados a ámbitos turísticos similares.

  17. Eggshell Biliverdin and Protoporphyrin Pigments in a Songbird: Are They Derived from Erythrocytes, Blood Plasma, or the Shell Gland?

    Science.gov (United States)

    Hargitai, Rita; Boross, Nóra; Hámori, Susanne; Neuberger, Eszter; Nyiri, Zoltán

    Biliverdin and protoporphyrin pigments are deposited into the eggshell when the developing egg is in the shell gland. However, the site of synthesis of eggshell pigments is still uncertain, although it may influence the possible costs and potential functions of eggshell coloration in avian species. Eggshell pigments may be derived from red blood cells or be produced in other organs and then transferred to the shell gland, or they may be synthesized de novo in the shell gland. We studied in the canary (Serinus canaria) whether eggshell blue-green and brown pigmentations are associated with experimentally elevated anemia, female hematocrit level, immature erythrocyte percentage, and feces and plasma pigment levels during egg laying to find out the possible origin of eggshell pigments. We found no significant effects of hematocrit level or experimentally elevated anemia on intensity of eggshell blue-green and brown pigmentations; therefore, we consider it less likely that eggshell pigments are derived from erythrocytes. In addition, we found no significant associations between female feces biliverdin concentration during egg laying and intensity of eggshell blue-green pigmentation, suggesting that eggshell biliverdin may not originate from the spleen or liver. We found a negative association between plasma and feces protoporphyrin concentrations during egg laying and eggshell brown chroma. This result suggests that an increased production of protoporphyrin in the liver, which could have elevated plasma and feces protoporphyrin concentrations, could inhibit eggshell protoporphyrin pigmentation, probably through affecting enzymatic activities. We suggest that both pigments are produced de novo in the shell gland in the canary, but circulating pigment levels may influence shell gland pigment synthesis, thus connecting the physiological status of the female to eggshell coloration.

  18. effects of sulphur addition on addition on and mechanical properties

    African Journals Online (AJOL)

    User

    on the microstructure and mechanical properties of sand cast been investigated ... owed that the addition of sulphur to Al-12wt%Si alloy. 12wt%Si alloy .... 28 materials. 29. Element. Aluminum. Silicon. Al. Si. Ca. Fe. Cu. Zn. Mn. Mg. Cr. B. 99.71.

  19. Evaluation of certain food additives.

    Science.gov (United States)

    2017-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee’s evaluations of technical, toxicological and dietary exposure data for 10 food additives (Allura Red AC; carob bean gum; lutein esters from Tagetes erecta; octenyl succinic acid (OSA)– modified gum arabic; pectin; Quinoline Yellow; rosemary extract; steviol glycosides; tartrazine; and xanthan gum) and five groups of flavouring agents (alicyclic, alicyclic-fused and aromatic-fused ring lactones; aliphatic and aromatic amines and amides; aliphatic secondary alcohols, ketones and related esters; cinnamyl alcohol and related substances; and tetrahydrofuran and furanone derivatives). Specifications for the following food additives were revised: aspartame; cassia gum; citric and fatty acid esters of glycerol (CITREM); modified starches; octanoic acid; starch sodium octenyl succinate; and total colouring matters. Annexed to the report are tables summarizing the Committee’s recommendations for dietary exposures to and toxicological evaluations of all of the food additives, including flavouring agents, considered at this meeting.

  20. Additive manufacturing of tunable lenses

    Science.gov (United States)

    Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

    2017-02-01

    Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

  1. Calcium addition in straw gasification

    DEFF Research Database (Denmark)

    Risnes, H.; Fjellerup, Jan Søren; Henriksen, Ulrik Birk

    2003-01-01

    The present work focuses on the influence of calcium addition in gasification. The inorganic¿organic element interaction as well as the detailed inorganic¿inorganic elements interaction has been studied. The effect of calcium addition as calcium sugar/molasses solutions to straw significantly...... affected the ash chemistry and the ash sintering tendency but much less the char reactivity. Thermo balance test are made and high-temperature X-ray diffraction measurements are performed, the experimental results indicate that with calcium addition major inorganic¿inorganic reactions take place very late...... in the char conversion process. Comprehensive global equilibrium calculations predicted important characteristics of the inorganic ash residue. Equilibrium calculations predict the formation of liquid salt if sufficient amounts of Ca are added and according to experiments as well as calculations calcium binds...

  2. Additive interaction in survival analysis

    DEFF Research Database (Denmark)

    Rod, Naja Hulvej; Lange, Theis; Andersen, Ingelise

    2012-01-01

    It is a widely held belief in public health and clinical decision-making that interventions or preventive strategies should be aimed at patients or population subgroups where most cases could potentially be prevented. To identify such subgroups, deviation from additivity of absolute effects...... an empirical example of interaction between education and smoking on risk of lung cancer. We argue that deviations from additivity of effects are important for public health interventions and clinical decision-making, and such estimations should be encouraged in prospective studies on health. A detailed...... is the relevant measure of interest. Multiplicative survival models, such as the Cox proportional hazards model, are often used to estimate the association between exposure and risk of disease in prospective studies. In Cox models, deviations from additivity have usually been assessed by surrogate measures...

  3. Additional disulfide bonds in insulin

    DEFF Research Database (Denmark)

    Vinther, Tine N; Pettersson, Ingrid; Huus, Kasper

    2015-01-01

    The structure of insulin, a glucose homeostasis-controlling hormone, is highly conserved in all vertebrates and stabilized by three disulfide bonds. Recently, we designed a novel insulin analogue containing a fourth disulfide bond located between positions A10-B4. The N-terminus of insulin's B......-chain is flexible and can adapt multiple conformations. We examined how well disulfide bond predictions algorithms could identify disulfide bonds in this region of insulin. In order to identify stable insulin analogues with additional disulfide bonds, which could be expressed, the Cβ cut-off distance had...... in comparison to analogues with additional disulfide bonds that were more difficult to predict. In contrast, addition of the fourth disulfide bond rendered all analogues resistant to fibrillation under stress conditions and all stable analogues bound to the insulin receptor with picomolar affinities. Thus...

  4. Aminodisulfides as additives to lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Balin, A.I.; Tarasevich, V.B.; Veretenova, T.N.

    1980-01-01

    A study was carried out and tehcnology developed for producing sulfur-nitrogen containing additives of the type of aminodisulfide by interaction of beta, beta-dichlordialkyl (aryl) disulfides with diethanolamine in a medium of sulfur-diethanolamine. The 2,2'-bis-(diethanol)-dialkyl(aryl) disulfides obtained do not hydrolyze in aqueous soltuions of alkalis, exhibit rather high antiscoring properties and are recommended for tests as active additives of high pressure to SOZH and technological lubricants of the oil and emulsion types.

  5. Additive to clay drilling muds

    Energy Technology Data Exchange (ETDEWEB)

    Voytenko, V.S.; Nekrasova, V.B.; Nikitinskiy, E.L.; Ponomarev, V.N.

    1984-01-01

    The purpose of the invention is to improve the lubricating and strengthening properties of clay drilling muds. This goal is achieved because the lubricating and strengthening additive used is waste from the pulp and paper industry at the stage of reprocessing crude sulfate soap into phytosterol.

  6. The selective addition of water

    NARCIS (Netherlands)

    Resch, V.; Hanefeld, U.

    2014-01-01

    Water is omnipresent and essential. Yet at the same time it is a rather unreactive molecule. The direct addition of water to C[double bond, length as m-dash]C double bonds is therefore a challenge not answered convincingly. In this perspective we critically evaluate the selectivity and the

  7. Additive manufacturing in maxillofacial reconstruction

    Directory of Open Access Journals (Sweden)

    Dincă Luciana Laura

    2017-01-01

    Full Text Available In this paper the benefits of using additive manufacturing technologies in maxillofacial reconstruction are highlighted. Based on a real clinical case, the paper describes the manufacture of an implant prototype replacing the right zygomatic bone and a part of maxilla using additive manufacturing technologies. The face is the most expressive part of the human body that makes us unique. It was shown that the maxillofacial prostheses help to improve the psychological state of patients affected by, because low self esteem feeling appears commonly to this patients with the facial defects. The aim of this paper is to show how using additive manufacturing technologies methods within this research, the producing a surgical model will help surgeon to improve the pre-operative planning. For this we used additive manufacturing technologies such as Stereolitography to achieve the biomodel and FDM-fused deposition modelling to obtain a prototype model because these technologies make it possible to obtain prosthesis according to the physical and mechanical requirements of the region of implantation.

  8. Radiation curable Michael addition compounds

    International Nuclear Information System (INIS)

    Gruber, G.W.; Friedlander, C.B.; McDonald, W.H.; Dowbenko, R.

    1979-01-01

    Radiation polymerizable acrylyloxy-containing reaction products are provided from Michael addition reaction of an amide containing at least two acrylate groups with a primary or secondary amine. The resulting amine adducts of the amide, which contain at least one acrylate group per molecule, possesses high cure rates in air and are useful in compositions for forming coatings. (author)

  9. Additively manufactured porous tantalum implants

    NARCIS (Netherlands)

    Wauthle, Ruben; Van Der Stok, Johan; Yavari, Saber Amin; Van Humbeeck, Jan; Kruth, Jean Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-01-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of

  10. Evaluation of certain food additives.

    Science.gov (United States)

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  11. Protocol for ADDITION-PRO

    DEFF Research Database (Denmark)

    Johansen, Nanna Borup; Hansen, Anne-Louise Smidt; Jensen, Troels M

    2012-01-01

    disease and microvascular diabetic complications. We also require a better understanding of the mechanisms that underlie and drive early changes in cardiometabolic physiology. The ADDITION-PRO study was designed to address these issues among individuals at different levels of diabetes risk recruited from...... Danish primary care. METHODS/DESIGN: ADDITION-PRO is a population-based, longitudinal cohort study of individuals at high risk for diabetes. 16,136 eligible individuals were identified at high risk following participation in a stepwise screening programme in Danish general practice between 2001 and 2006....... All individuals with impaired glucose regulation at screening, those who developed diabetes following screening, and a random sub-sample of those at lower levels of diabetes risk were invited to attend a follow-up health assessment in 2009-2011 (n=4,188), of whom 2,082 (50%) attended. The health...

  12. Additive theory of prime numbers

    CERN Document Server

    Hua, L K

    2009-01-01

    Loo-Keng Hua was a master mathematician, best known for his work using analytic methods in number theory. In particular, Hua is remembered for his contributions to Waring's Problem and his estimates of trigonometric sums. Additive Theory of Prime Numbers is an exposition of the classic methods as well as Hua's own techniques, many of which have now also become classic. An essential starting point is Vinogradov's mean-value theorem for trigonometric sums, which Hua usefully rephrases and improves. Hua states a generalized version of the Waring-Goldbach problem and gives asymptotic formulas for the number of solutions in Waring's Problem when the monomial x^k is replaced by an arbitrary polynomial of degree k. The book is an excellent entry point for readers interested in additive number theory. It will also be of value to those interested in the development of the now classic methods of the subject.

  13. Dolomitic lime containing hydraulic additive

    International Nuclear Information System (INIS)

    Lagzdina, S.; Sedmalis, U.; Bidermanis, L.; Liepins, J.; Grosvalds, I.

    1997-01-01

    To obtain qualitative dolomitic lime the optimum calcination temperature of dolomite containing about 9 % of clayey substances is 900 deg C. The mechanical strength of dolomitic lime containing 30 % of brick waste additive after 6-9 months of hardening is 1.4-1.5 times higher than that of samples without hydraulic additive, for calcium lime - 2.2-2.6 times higher. Generally the mechanical strength of dolomitic lime is higher than that one of calcium lime. It can be explained by the active role of MgO in the hydration and hardening processes of dolomitic lime. Xray diffraction phase analysis was performed by X-ray diffractometer DPON-3M with Cu-K α emission filter

  14. Decontamination formulation with sorbent additive

    Science.gov (United States)

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  15. The Frontiers of Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  16. Minimum Additive Waste Stabilization (MAWS)

    International Nuclear Information System (INIS)

    1994-02-01

    In the Minimum Additive Waste Stabilization(MAWS) concept, actual waste streams are utilized as additive resources for vitrification, which may contain the basic components (glass formers and fluxes) for making a suitable glass or glassy slag. If too much glass former is present, then the melt viscosity or temperature will be too high for processing; while if there is too much flux, then the durability may suffer. Therefore, there are optimum combinations of these two important classes of constituents depending on the criteria required. The challenge is to combine these resources in such a way that minimizes the use of non-waste additives yet yields a processable and durable final waste form for disposal. The benefit to this approach is that the volume of the final waste form is minimized (waste loading maximized) since little or no additives are used and vitrification itself results in volume reduction through evaporation of water, combustion of organics, and compaction of the solids into a non-porous glass. This implies a significant reduction in disposal costs due to volume reduction alone, and minimizes future risks/costs due to the long term durability and leach resistance of glass. This is accomplished by using integrated systems that are both cost-effective and produce an environmentally sound waste form for disposal. individual component technologies may include: vitrification; thermal destruction; soil washing; gas scrubbing/filtration; and, ion-exchange wastewater treatment. The particular combination of technologies will depend on the waste streams to be treated. At the heart of MAWS is vitrification technology, which incorporates all primary and secondary waste streams into a final, long-term, stabilized glass wasteform. The integrated technology approach, and view of waste streams as resources, is innovative yet practical to cost effectively treat a broad range of DOE mixed and low-level wastes

  17. Trust Trust Me (The Additivity)

    OpenAIRE

    Mano , Ken; Sakurada , Hideki; Tsukada , Yasuyuki

    2017-01-01

    Part 4: Trust Metrics; International audience; We present a mathematical formulation of a trust metric using a quality and quantity pair. Under a certain assumption, we regard trust as an additive value and define the soundness of a trust computation as not to exceed the total sum. Moreover, we point out the importance of not only soundness of each computed trust but also the stability of the trust computation procedure against changes in trust value assignment. In this setting, we define tru...

  18. A manual on using additives

    International Nuclear Information System (INIS)

    Lee, Bong Hoon

    1991-10-01

    This book consists of five chapters, which describe plasticizer ; summary, synthesis of plasticizer, basic notion, analysis and test on plasticizer, stabilizer ; stabilizer for plastic, an antioxidant, phosphorous acid estelle, ultraviolet ray absorbent, performance of stabilizer, influence on another additives, mix case of PVC production and analysis method for stabilizer, ultraviolet ray absorbent ; basic property and ultraviolet ray absorbent maker, anti-static agent ; basics, anti-static agent of a high molecule and analysis of anti-static agent, flame retardant of plastic.

  19. Additive property of separative power

    International Nuclear Information System (INIS)

    Yamamoto, Ichiro; Kanagawa, Akira

    1980-01-01

    A separative power of a separating element, whose heads and tails separation factors are α and β, is expressed by phi sub(b)(α, β) = [α(β - 1)1n α - (α - 1)1n β]/(αβ - 1) for the unit flow of the desired material and phi sub(a)(α, β) (= phi sub(b)(β, α)) for that of undesired material. The additive properties of the functions phi sub(b) and phi sub(a) were demonstrated by calculations of various types of ideal cascades, but the origin of the property is not obvious. The present study has furnished the mathematical basis of the additivity based on the special functional equation. First, for symmetric processes (α = β), the functional equation which describes the function representing the quality of separation f(α, α) concerning the desired material was obtained and solved to give the functional form of f(α, α). The result was extented to the function f(α, β) representing the quality of asymmetric separation (α not equal β). The derived function f(α, β) was demonstrated to be equal to phi sub(b)(α, β), and it was verified that functions phi sub(b)(α, β) and phi sub(a)(α, β) have the additive property in themselves. (author)

  20. Evaluation of certain food additives.

    Science.gov (United States)

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  1. Additive Manufacturing of Porous Metal

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kirka, Michael M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-06-01

    Currently, helium is obtained through separation from natural gas. The current industrial process incurs significant costs and requires large energy resources to successfully achieve separation. Through utilizing Additive Manufacturing (AM) technologies it is possible to reduce both of these burdens when refining helium gas. The ability to engineer porosity levels within Inconel 718 discs for controlled separation of helium from natural gas was investigated. Arrays of samples fabricated using the electron beam melting process were analyzed for their relative porosity density. Based upon the measurements, full scale discs were fabricated, and subsequently tested to determine their effectiveness in separating helium from liquefied natural gas.

  2. Additive manufacturing of RF absorbers

    Science.gov (United States)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  3. Mechanics of additively manufactured biomaterials.

    Science.gov (United States)

    Zadpoor, Amir A

    2017-06-01

    Additive manufacturing (3D printing) has found many applications in healthcare including fabrication of biomaterials as well as bioprinting of tissues and organs. Additively manufactured (AM) biomaterials may possess arbitrarily complex micro-architectures that give rise to novel mechanical, physical, and biological properties. The mechanical behavior of such porous biomaterials including their quasi-static mechanical properties and fatigue resistance is not yet well understood. It is particularly important to understand the relationship between the designed micro-architecture (topology) and the resulting mechanical properties. The current special issue is dedicated to understanding the mechanical behavior of AM biomaterials. Although various types of AM biomaterials are represented in the special issue, the primary focus is on AM porous metallic biomaterials. As a prelude to this special issue, this editorial reviews some of the latest findings in the mechanical behavior of AM porous metallic biomaterials so as to describe the current state-of-the-art and set the stage for the other studies appearing in the issue. Some areas that are important for future research are also briefly mentioned. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. LA ARQUEOLOGÍA HISTÓRICA EN CANARIAS. EL YACIMIENTO SEPULCRAL DE LA IGLESIA DE NUESTRA SEÑORA DE LA CONCEPCIÓN DE SANTA CRUZ DE TENERIFE (Historical archaeology in the Canaries. The burial site of the church of Our Lady of the Conception in Santa Cruz de Tenerife

    Directory of Open Access Journals (Sweden)

    Matilde Arnay de la Rosa

    2009-09-01

    Full Text Available En este estudio revisamos la situación actual de la Arqueología Histórica en las Islas Canarias, disciplina que, a diferencia de la americana, estaba poco desarrollada en las islas hasta hace unos 20 años. El reciente estudio de yacimientos históricos importantes ha modificado esta situación. Como ejemplo, comentamos algunos resultados derivados de la excavación de la iglesia de Nuestra Señora de la Concepción, en cuyo subsuelo se enterró a la población de Santa Cruz de Tenerife durante siglos. Pese a la pobre preservación de los esqueletos, ha sido posible inferir hábitos dietéticos, estado nutricional, exposición a tóxicos, y realizar estudios de DNA mitocondrial. El material recuperado (cerámica, pipas, crucifijos y adornos varios permite establecer estrechas relaciones con la colonización española del Nuevo Mundo. ENGLISH: This study includes an updated review of the current status of Historical Archaeology in the Canary Islands. Traditionally, in contrast with the situation in America, archaeological activity was devoted to studies on the prehistoric remains of population. In the last 20 years, excavation of some important historical sites has allowed the development of Historical Archaeology. As an example, we comment some results obtained from the excavation of the floor of the church of Our Lady of the Conception, where the deads of Santa Cruz de Tenerife were interred during centuries. Despite the poor preservation of the skeletons, it has been possible to infer dietary habits, toxic exposure, nutritional status and genetic lineages (mitochondrial DNA. Smoking pipes, ceramics and adornments associated with interments show a high similitude with those from colonial sites of the New World.

  5. Additive versus multiplicative muon conservation

    International Nuclear Information System (INIS)

    Nemethy, P.

    1981-01-01

    Experimental elucidation of the question of muon conservation is reviewed. It is shown that neutral-current experiments have not yet yielded information about muonium-antimuonium conversion at the weak-interaction level and that all the charged-current experiments agree that there is no evidence for a multiplicative law. The best limits, from the muon-decay neutrino experiment at LAMPF and from the inverse muon-decay experiment in the CERN neutrino beam, definitely exclude multiplicative law schemes with a branching ratio R approximately 1/2. It is concluded that unless the dynamics conspire to make a multiplicative law with very small R it would appear that muon conservation obeys conserved additive lepton flavor law. (U.K.)

  6. An Additive Manufacturing Test Artifact

    Science.gov (United States)

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  7. Business models for additive manufacturing

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne; Bogers, Marcel

    2015-01-01

    Digital fabrication — including additive manufacturing (AM), rapid prototyping and 3D printing — has the potential to revolutionize the way in which products are produced and delivered to the customer. Therefore, it challenges companies to reinvent their business model — describing the logic...... of creating and capturing value. In this paper, we explore the implications that AM technologies have for manufacturing systems in the new business models that they enable. In particular, we consider how a consumer goods manufacturer can organize the operations of a more open business model when moving from...... a manufacturer-centric to a consumer-centric value logic. A major shift includes a move from centralized to decentralized supply chains, where consumer goods manufacturers can implement a “hybrid” approach with a focus on localization and accessibility or develop a fully personalized model where the consumer...

  8. Additive manufacturing with polypropylene microfibers.

    Science.gov (United States)

    Haigh, Jodie N; Dargaville, Tim R; Dalton, Paul D

    2017-08-01

    The additive manufacturing of small diameter polypropylene microfibers is described, achieved using a technique termed melt electrospinning writing. Sequential fiber layering, which is important for accurate three-dimensional fabrication, was achieved with the smallest fiber diameter of 16.4±0.2μm obtained. The collector speed, temperature and melt flow rate to the nozzle were optimized for quality and minimal fiber pulsing. Of particular importance to the success of this method is appropriate heating of the collector plate, so that the electrostatically drawn filament adheres during the direct-writing process. By demonstrating the direct-writing of polypropylene, new applications exploiting the favorable mechanical, stability and biocompatible properties of this polymer are envisaged. Copyright © 2017. Published by Elsevier B.V.

  9. Additivity of entropic uncertainty relations

    Directory of Open Access Journals (Sweden)

    René Schwonnek

    2018-03-01

    Full Text Available We consider the uncertainty between two pairs of local projective measurements performed on a multipartite system. We show that the optimal bound in any linear uncertainty relation, formulated in terms of the Shannon entropy, is additive. This directly implies, against naive intuition, that the minimal entropic uncertainty can always be realized by fully separable states. Hence, in contradiction to proposals by other authors, no entanglement witness can be constructed solely by comparing the attainable uncertainties of entangled and separable states. However, our result gives rise to a huge simplification for computing global uncertainty bounds as they now can be deduced from local ones. Furthermore, we provide the natural generalization of the Maassen and Uffink inequality for linear uncertainty relations with arbitrary positive coefficients.

  10. Additional Equipment for Soil Biodegradation

    Science.gov (United States)

    Vondráčková, Terezie; Kraus, Michal; Šál, Jiří

    2017-12-01

    Intensification of industrial production, increasing citizens’ living standards, expanding the consumer assortment mean in the production - consumption cycle a constantly increasing occurrence of waste material, which by its very nature must be considered as a source of useful raw materials in all branches of human activity. In addition to strict legislative requirements, a number of circumstances characterize waste management. It is mainly extensive transport associated with the handling and storage of large volumes of substances with a large assortment of materials (substances of all possible physical and chemical properties) and high demands on reliability and time coordination of follow-up processes. Considerable differences in transport distances, a large number of sources, processors and customers, and not least seasonal fluctuations in waste and strong price pressures cannot be overlooked. This highlights the importance of logistics in waste management. Soils that are contaminated with oil and petroleum products are hazardous industrial waste. Methods of industrial waste disposal are landfilling, biological processes, thermal processes and physical and chemical methods. The paper focuses on the possibilities of degradation of oil pollution, in particular biodegradation by bacteria, which is relatively low-cost among technologies. It is necessary to win the fight with time so that no ground water is contaminated. We have developed two additional devices to help reduce oil accident of smaller ranges. In the case of such an oil accident, it is necessary to carry out the permeability test of contaminated soil in time and, on this basis, to choose the technology appropriate to the accident - either in-sit biodegradation - at the site of the accident, or on-sit - to remove the soil and biodegrade it on the designated deposits. A special injection drill was developed for in-sit biodegradation, tossing and aeration equipment of the extracted soil was developed for

  11. Evolución de la mortalidad y de los años de vida perdidos prematuramente relacionados con el consumo de alcohol en las Islas Canarias (1980-1998 Trends in mortality and years of life lost related to alcohol in the Canary Islands, Spain (1980-1998

    Directory of Open Access Journals (Sweden)

    L.M. Bello

    2003-12-01

    Full Text Available Objetivo: Describir la mortalidad y los años de vida perdidos prematuramente (AVPP relacionados con el alcohol en las Islas Canarias durante el período 1980-1998. Métodos: Las defunciones por edad, sexo y causa desde 1980 a 1998 se obtuvieron del Instituto Nacional de Estadística (Movimiento Natural de la Población. Se calculó la proporción de muertes relacionadas con el alcohol para cada año, sexo y grupo de edad a partir de la fracción atribuible poblacional propuesta por los Centers for Disease Control (Estados Unidos. Para cada categoría diagnóstica, los años de vida perdidos prematuramente relacionados con el alcohol fueron calculados multiplicando las defunciones por la fracción poblacional en grupos quinquenales de edad para ambos sexos hasta la edad de 65 años. Resultados: Durante el período 1980-1998, el número de fallecimientos por causas relacionadas con el alcohol fue de 12.614, con un promedio del 6,4% anual y una razón varón/mujer de aproximadamente 2:1. Las neoplasias malignas, las enfermedades digestivas y los accidentes no intencionales relacionados con el alcohol presentan las mayores tasas de mortalidad y de AVPP tanto en varones como en mujeres; en particular, los accidentes no intencionales generan AVPP por encima de las otras causas, lo que supone el 50,6% del total de AVPP por causas relacionadas con el alcohol en varones y el 55,5% en mujeres. Durante el período de estudio, la cirrosis hepáticas y otras enfermedades crónicas del hígado (CIE 571 van decreciendo paulatinamente en los varones y se mantienen en las mujeres. Conclusiones: En el ámbito y período de estudio (Islas Canarias, 1980-1998, se ha observado que el porcentaje de fallecidos por causas relacionadas con el alcohol es elevado, incluyendo la mortalidad por cirrosis hepática. Por tanto, sería necesario potenciar el desarrollo de estrategias educativas y otras dirigidas para controlar su consumo, sobre todo en los j

  12. Incommensurate crystallography without additional dimensions.

    Science.gov (United States)

    Kocian, Philippe

    2013-07-01

    It is shown that the Euclidean group of translations, when treated as a Lie group, generates translations not only in Euclidean space but on any space, curved or not. Translations are then not necessarily vectors (straight lines); they can be any curve compatible with the parameterization of the considered space. In particular, attention is drawn to the fact that one and only one finite and free module of the Lie algebra of the group of translations can generate both modulated and non-modulated lattices, the modulated character being given only by the parameterization of the space in which the lattice is generated. Moreover, it is shown that the diffraction pattern of a structure is directly linked to the action of that free and finite module. In the Fourier transform of a whole structure, the Fourier transform of the electron density of one unit cell (i.e. the structure factor) appears concretely, whether the structure is modulated or not. Thus, there exists a neat separation: the geometrical aspect on the one hand and the action of the group on the other, without requiring additional dimensions.

  13. Sustainability Characterization for Additive Manufacturing.

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  14. Dynamics of ultrasonic additive manufacturing.

    Science.gov (United States)

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Dimensionless numbers in additive manufacturing

    Science.gov (United States)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  16. Additive Manufacturing of Fuel Injectors

    Energy Technology Data Exchange (ETDEWEB)

    Sadek Tadros, Dr. Alber Alphonse [Edison Welding Institute, Inc., Columbus, OH (United States); Ritter, Dr. George W. [Edison Welding Institute, Inc., Columbus, OH (United States); Drews, Charles Donald [Edison Welding Institute, Inc., Columbus, OH (United States); Ryan, Daniel [Solar Turbines Inc., San Diego, CA (United States)

    2017-10-24

    Additive manufacturing (AM), also known as 3D-printing, has been shifting from a novelty prototyping paradigm to a legitimate manufacturing tool capable of creating components for highly complex engineered products. An emerging AM technology for producing metal parts is the laser powder bed fusion (L-PBF) process; however, industry manufacturing specifications and component design practices for L-PBF have not yet been established. Solar Turbines Incorporated (Solar), an industrial gas turbine manufacturer, has been evaluating AM technology for development and production applications with the desire to enable accelerated product development cycle times, overall turbine efficiency improvements, and supply chain flexibility relative to conventional manufacturing processes (casting, brazing, welding). Accordingly, Solar teamed with EWI on a joint two-and-a-half-year project with the goal of developing a production L-PBF AM process capable of consistently producing high-nickel alloy material suitable for high temperature gas turbine engine fuel injector components. The project plan tasks were designed to understand the interaction of the process variables and their combined impact on the resultant AM material quality. The composition of the high-nickel alloy powders selected for this program met the conventional cast Hastelloy X compositional limits and were commercially available in different particle size distributions (PSD) from two suppliers. Solar produced all the test articles and both EWI and Solar shared responsibility for analyzing them. The effects of powder metal input stock, laser parameters, heat treatments, and post-finishing methods were evaluated. This process knowledge was then used to generate tensile, fatigue, and creep material properties data curves suitable for component design activities. The key process controls for ensuring consistent material properties were documented in AM powder and process specifications. The basic components of the project

  17. [Leukosis in captive wild birds].

    Science.gov (United States)

    Loupal, G

    1984-10-01

    Among 2589 captive wild birds, examined between 1974 and 1983, we found leukosis in 26 birds belonging to 13 different species and five orders. We diagnosed lymphoid leukosis in 11 birds (two Melopsittacus undulatus, two Psittacus erithacus one Platycerus eximius, one Columba livia, one Streptopelia decaocto, one Polyplectron bicalcaratum, one Pavo cristatus, one Aptenodytes patachonia and one finch, species unknown), myeloid leukosis in 14 (nine Melopsittacus undulatus, two Agapomis personata fischeri, two Urgeainthus bengalus and one Neophemia pulchella) and stem cell leukosis in one bird (Serinus canaria). Among the cases with lymphoid leukosis we distinguished between lymphoblastic (four cases) and prolymphocytic forms (seven). Myeloid leukosis was subdivided into poorly differentiated (12 cases) and well differentiated myeloblastosis (two).

  18. Septic tank additive impacts on microbial populations.

    Science.gov (United States)

    Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

    2008-01-01

    Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

  19. Additive conjoint measurement for multiattribute utility

    NARCIS (Netherlands)

    Maas, A.; Wakker, P.P.

    1994-01-01

    This paper shows that multiattribute utility can be simplified by methods from additive conjoint measurement. Given additive conjoint measurability under certainty, axiomatizations can be simplified, and implementation and reliability of elicitation can be improved. This also contributes to the

  20. Additive Manufacturing of Aerospace Propulsion Components

    Science.gov (United States)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  1. The Philosophical Consideration about Food Additives

    OpenAIRE

    Baoyu Ma

    2015-01-01

    This study mainly analyzes the essential features of food additives technology from the angle of philosophy, explaining the essential characteristics of food additives technology. As for the attitude towards the application of food additives, it is influenced by the public's gender, age, educational level, occupation and monthly expenditure for buying non-staple food and other variables, thus, the attitude towards food additives and green food, as well as the attitude towards using artificial...

  2. Propuesta de reforma del sistema electoral de Canarias

    Directory of Open Access Journals (Sweden)

    Adolfo López Carmona

    2015-06-01

    Full Text Available El actual sistema electoral canario produce discordancias entre votos recibidos y escaños asignados a los partidos debido (1 a la doble barrera electoral, (2 a que se usan las islas como circunscripciones donde se realizan repartos independientes de escaños a los partidos, (3 y a que el tamaño de estas circunscripciones no es proporcional a sus poblaciones. Ante estas discordancias proponemos como alternativa la técnica del reparto biproporcional, la cual considera tanto los votos totales que reciben los partidos así como un reparto de escaños entre circunscripciones (islas más ajustado a la población actualizada según el último padrón de cada una de ellas. The current canary electoral system produces discordances between the votes received and the seats allocated to parties due to (1 the double electoral barrier, (2 the use of the islands as constituencies where independent distributions of seats are made to parties, (3 and the fact that the size of these constituencies is not proportional to their populations. Given these discordances, this paper presents the technique of biproportional allocation as an alternative to the current method. Biproportionality considers both the total votes received by the parties as well as a distribution of seats among constituencies (islands that is more adjusted to the updated population according to the last census of each one.

  3. Centro internacional para windsurfistas, playa de Vargas, Gran Canaria

    OpenAIRE

    Pérez Sosa, Isacó

    2006-01-01

    El proyecto propone realizar un centro internacional que reúna tanto las instalaciones necesarias para realizar competiciones de windsurf como un albergue, un gimnasio de mantenimiento e instalaciones para otras actividades acuáticas o de ocio complementarias. El edificio se desarrollará en tres construcciones bajas longitudinales que se adaptaran al terreno empotrándose a él y abriéndose hacia el mar. Originando éstas terrazas se sigue la forma común tradicional de asentamiento sobre el ter...

  4. Puertos menores, en Canarias. Puerto de Arrecife en Lanzarote

    Directory of Open Access Journals (Sweden)

    Equipo Editorial

    2017-05-01

    Full Text Available En la ensenada de Los Mármoles, cuyo fondo se halla recubierto por un pequeño banco de arena de aproximadamente 1 m de espesor, se está construyendo una escollera de abrigo, cuya parte interior constituye un muelle de atraque.

  5. The dilemma of allergy to food additives.

    Science.gov (United States)

    Bahna, Sami L; Burkhardt, Joshua G

    2018-01-01

    To provide a brief summary on food additives and to outline a practical approach for evaluating subjects suspected of having reactions to food additives. Information was derived from selected reviews and original articles published in peer-reviewed journals, supplemented by the clinical experience of the authors. Priority was given to studies that used blinded, placebo controlled, oral challenges to confirm adverse reactions to food additives. In addition, selected, appropriately evaluated case reports were included. A large number of food additives are widely used in the food industry. Allergic reactions to additives seem to be rare but are very likely underdiagnosed, primarily due to a low index of suspicion. A wide variety of symptoms to food additives have been reported, but a cause-and-effect relationship has not been well documented in the majority of cases. Reactions to food additives should be suspected in patients who report symptoms related to multiple foods or to a certain food when commercially prepared but not when home made. It is also prudent to investigate food additives in subjects considered to have "idiopathic" reactions. Except for a limited number of natural additives, there is a small role for skin tests or in vitro testing. Oral challenge, in stages, with commonly used additives is the definitive procedure for detecting the offending agent. Once the specific additive is identified, management is strict avoidance, which can be difficult.

  6. Enabling Technologies for Medium Additive Manufacturing (MAAM)

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, Bradley S. [ORNL; Love, Lonnie J. [ORNL; Chesser, Phillip C. [ORNL; Miller, Jason [Cosine Additive, Inc.; McCalip, Andrew [Cosine Additive, Inc.

    2018-02-01

    ORNL has worked with Cosine Additive, Inc. on the design of MAAM extrusion components. The objective is to improve the print speed and part quality. A pellet extruder has been procured and integrated into the MAAM printer. Print speed has been greatly enhanced. In addition, ORNL and Cosine Additive have worked on alternative designs for a pellet drying and feed system.

  7. Additive operator-difference schemes splitting schemes

    CERN Document Server

    Vabishchevich, Petr N

    2013-01-01

    Applied mathematical modeling isconcerned with solving unsteady problems. This bookshows how toconstruct additive difference schemes to solve approximately unsteady multi-dimensional problems for PDEs. Two classes of schemes are highlighted: methods of splitting with respect to spatial variables (alternating direction methods) and schemes of splitting into physical processes. Also regionally additive schemes (domain decomposition methods)and unconditionally stable additive schemes of multi-component splitting are considered for evolutionary equations of first and second order as well as for sy

  8. Biocompatibility of photopolymers for additive manufacturing

    OpenAIRE

    Leonhardt Stefan; Klare Martin; Scheer Maurice; Fischer Theresa; Cordes Burghard; Eblenkamp Markus

    2016-01-01

    To establish photopolymers for the production of class II or class III medical products by additive manufacturing it is essential to know which components of photopolymeric systems, consisting of monomers, photoinitiators and additives, are the determining factors on their biocompatible properties. In this study the leachable substances of a cured photopolymeric system were eluted and identified by HPLC-MS detection. In addition the cured photopolymer was testes for cytotoxicity and genotoxic...

  9. Harnessing the Potential of Additive Manufacturing

    Science.gov (United States)

    2016-12-01

    31 Defense AT&L: November-December 2016 Harnessing the Potential of Additive Manufacturing Bill Decker Decker is director of Technology...achieve its goal of competition throughout the acquisition life cycle. When we look at additive manufacturing , we have a much different environment. To...Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion. This specification covers additively manufactured titanium-6 aluminum-4 vanadium (Ti-6Al-4V

  10. Additives in food and their properties

    OpenAIRE

    TYLOVÁ, Kristýna

    2013-01-01

    The aim of this work is to deepen the knowledge about additives in foods, the importance of technological additives in foods, their properties and effects on human health. The aim of this work is a study of technical and scientific literature on the topic: "additives in foods and their properties" and review of the literature. Also in the practical part, implementation and evaluation of a questionnaire survey of the experimental group related to the topic: "Validation and comparison of knowle...

  11. Merits and Demerits of Food Additives

    OpenAIRE

    YANG, Xuening; ZHAN, Yong

    2014-01-01

    Food additive is a double-edged sword. It has merits and demerits. Food additives have such merits as improving sensory properties of foods, preventing deterioration and extending the shelf life, increasing varieties of foods, enhancing convenience of foods, facilitating food processing, and satisfying other demands. However, excessive and illegal use of food additives will exert adverse influence on food security. Therefore, it is required to take proper measures to bring merits of food addi...

  12. Merits and Demerits of Food Additives

    Institute of Scientific and Technical Information of China (English)

    Xuening; YANG; Yong; ZHAN

    2014-01-01

    Food additive is a double-edged sword. It has merits and demerits. Food additives have such merits as improving sensory properties of foods,preventing deterioration and extending the shelf life,increasing varieties of foods,enhancing convenience of foods,facilitating food processing,and satisfying other demands. However,excessive and illegal use of food additives will exert adverse influence on food security.Therefore,it is required to take proper measures to bring merits of food additives into full play,and get rid of their demerits.

  13. Allergic and immunologic reactions to food additives.

    Science.gov (United States)

    Gultekin, Fatih; Doguc, Duygu Kumbul

    2013-08-01

    For centuries, food additives have been used for flavouring, colouring and extension of the useful shelf life of food, as well as the promotion of food safety. During the last 20 years, the studies implicating the additives contained in foods and medicine as a causative factor of allergic reactions have been proliferated considerably. In this review, we aimed to overview all of the food additives which were approved to consume in EU and find out how common and serious allergic reactions come into existence following the consuming of food additives.

  14. 78 FR 34351 - Procurement List; Additions

    Science.gov (United States)

    2013-06-07

    .... ADDRESSES: Committee for Purchase from People Who are Blind or Severely Disabled, 1401 S. Clark Street... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions AGENCY: Committee for Purchase from People Who are Blind or Severely Disabled. ACTION: Additions to the...

  15. Additive Manufacturing for Low Volume Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Tate, John G. [Schaeffler Group USA, Spartanburg, SC (United States); Richardson, Bradley S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    ORNL worked with the Schaeffler Group USA to explore additive manufacturing techniques that might be appropriate for prototyping of bearing cages. Multiple additive manufacturing techniques were investigated, including e-beam, binder jet and multiple laser based processes. The binder jet process worked best for the thin, detailed cages printed.

  16. 48 CFR 1603.7002 - Additional guidelines.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Additional guidelines. 1603.7002 Section 1603.7002 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL... OF INTEREST Misleading, Deceptive, or Unfair Advertising 1603.7002 Additional guidelines. Any...

  17. 18 CFR 33.10 - Additional information.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 33.10 Section 33.10 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... § 33.10 Additional information. The Director of the Office of Energy Market Regulation, or his designee...

  18. Additives In Meat and Poultry Products

    Science.gov (United States)

    ... Fact Sheets / Additives in Meat and Poultry Products / Additives in Meat and Poultry Products Z7_0Q0619C0JGR010IFST1G5B10H3 ... Affairs Recalls and Public Health Alerts Regulatory Compliance Regulations, Directives and Notices Rulemaking ...

  19. Feed Additives for Aquaculture and Aquarium Culture

    OpenAIRE

    Barata, Eduardo N.; Velez, Zélia

    2011-01-01

    The presente invention refers of feed additives for aquaculture and aquarium culture. These additives comprise the amino acid, 1-methyl-L-tryptophane, or its isomers with the objective of improving the attractiveness of feeds used in aquaculture and aquaria for fish, as well as other aquatic organisms, under culture conditions. Therefore, this invention has applications in the agriculture-food industry.

  20. 77 FR 41899 - Indirect Food Additives: Polymers

    Science.gov (United States)

    2012-07-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 177 [Docket No. FDA-2012-F-0031] Indirect Food Additives: Polymers AGENCY: Food and Drug Administration, HHS. ACTION... CFR part 177 is amended as follows: PART 177--INDIRECT FOOD ADDITIVES: POLYMERS 0 1. The authority...

  1. Photoactive devices including porphyrinoids with coordinating additives

    Science.gov (United States)

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  2. Implementation of the Additional Protocol in Japan

    International Nuclear Information System (INIS)

    Ogawa, T.

    2001-01-01

    The Additional Protocol between Japan and the IAEA entered into force in December 1999. To come into force a series of implementation trials of Additional Protocol was carried out at two Japanese representative nuclear research centers, i.e. Tokai Research Establishment of Japan Atomic Energy Research Institute (JAERI) and Oarai Engineering Center of Japan Nuclear Fuel Cycle Development Institute (JNC). These trials were proposed by Japan and were conducted in cooperation with the IAEA Secretariat. In addition, Japan amended 'the Law for the Regulation of Reactors etc.', to collect adequate information to submit to the IAEA, to arrange the surrounding for the complementary access, etc. In addition, Japan Submitted the Initial Declaration of the Additional Protocol within 180 days of the entry into force of the Protocol, in the middle of June, 2000

  3. [Effect of biochar addition on soil evaporation.

    Science.gov (United States)

    Xu, Jian; Niu, Wen Quan; Zhang, Ming Zhi; Li, Yuan; Lyu, Wang; Li, Kang-Yong; Zou, Xiao-Yang; Liang, Bo-Hui

    2016-11-18

    In order to determine the rational amount of biochar application and its effect on soil hydrological processes in arid area, soil column experiments were conducted in the laboratory using three biochar additions (5%, 10% and 15%) and four different biochar types (devaporation. The results showed that the addition of biochar could change the phreatic water recharge, soil water-holding capacity, capillary water upward movement and soil evaporation obviously. But the effects were different depending on the type of biochar raw material and the size of particle. The phreatic water recharge increased with the increasing amount of biochar addition. The addition of biochar could obviously enlarge the soil water-holding capacity and promote the capillary water upward movement rate. This effect was greater when using the material of bamboo charcoal compared with using wood charcoal, while biochar with small particle size had greater impact than that with big particle size. The biochar could effectively restrain the soil evaporation at a low addition amount (5%). But it definitely promoted the soil evaporation if the addition amount was very high. In arid area, biochar addition in appropriate amount could improve soil water retention capacity.

  4. Graphite and Hybrid Nanomaterials as Lubricant Additives

    Directory of Open Access Journals (Sweden)

    Zhenyu J. Zhang

    2014-04-01

    Full Text Available Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great potential of hybrid nanoparticles as anti-wear and extreme-pressure additives with excellent levels of performance. The organic part in the hybrid materials improves their flexibility and stability, while the inorganic part is responsible for hardness. The relationship between the design parameters of the organic coatings, such as molecular architecture and the lubrication performance, however, remains to be fully elucidated. A survey of current understanding of hybrid nanoparticles as lubricant additives is presented in this review.

  5. Additional symmetries of supersymmetric KP hierarchies

    International Nuclear Information System (INIS)

    Stanciu, S.

    1993-09-01

    We investigate the additional symmetries of several supersymmetric KP hierarchies: The SKP hierarchy of Manin and Radul, the SKP 2 hierarchy, and the Jacobian SKP hierarchy. The main technical tool is the supersymmetric generalisation of a map originally due to Radul between the Lie algebra of superdifferential operators and the Lie algebra of vector fields on the space of supersymmetric Lax operators. In the case of the Manin-Radul SKP hierarchy we identify additional symmetries which form an algebra isomorphic to a subalgebra of superdifferential operators; whereas in the case of the Jacobian SKP, the (additional) symmetries are identified with the algebra itself. (orig.)

  6. 78 FR 38953 - Procurement List Additions

    Science.gov (United States)

    2013-06-28

    ... Blind or Severely Disabled published notices of proposed additions to the Procurement List. After... Punch, Paper, Desktop, 3-Hole, Adjustable, 11 sheet capacity, Metallic Base, Black Grip. Coverage: A...

  7. 78 FR 12295 - Procurement List; Additions

    Science.gov (United States)

    2013-02-22

    ... published notices of proposed additions to the Procurement List. After consideration of the material..., 508 Compliant, 12 Digit, Portable, Desktop, Battery Operated NPA: MidWest Enterprises for the Blind...

  8. Laser-based additive manufacturing of metals

    CSIR Research Space (South Africa)

    Kumar, S

    2010-11-01

    Full Text Available For making metallic products through Additive Manufacturing (AM) processes, laser-based systems play very significant roles. Laser-based processes such as Selective Laser Melting (SLM) and Laser Engineered Net Shaping (LENS) are dominating processes...

  9. Additively Manufactured Ceramic Rocket Engine Components

    Data.gov (United States)

    National Aeronautics and Space Administration — HRL Laboratories, LLC, with Vector Space Systems (VSS) as subcontractor, has a 24-month effort to develop additive manufacturing technology for reinforced ceramic...

  10. 7 CFR 955.91 - Additional parties.

    Science.gov (United States)

    2010-01-01

    ... Marketing Agreement § 955.91 Additional parties. After the effective date thereof, any handler may become a... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... then be effective as to such new contracting party. ...

  11. Non-additive measure and integral

    CERN Document Server

    Denneberg, Dieter

    1994-01-01

    Non-Additive Measure and Integral is the first systematic approach to the subject. Much of the additive theory (convergence theorems, Lebesgue spaces, representation theorems) is generalized, at least for submodular measures which are characterized by having a subadditive integral. The theory is of interest for applications to economic decision theory (decisions under risk and uncertainty), to statistics (including belief functions, fuzzy measures) to cooperative game theory, artificial intelligence, insurance, etc. Non-Additive Measure and Integral collects the results of scattered and often isolated approaches to non-additive measures and their integrals which originate in pure mathematics, potential theory, statistics, game theory, economic decision theory and other fields of application. It unifies, simplifies and generalizes known results and supplements the theory with new results, thus providing a sound basis for applications and further research in this growing field of increasing interest. It also co...

  12. Nonparametric additive regression for repeatedly measured data

    KAUST Repository

    Carroll, R. J.; Maity, A.; Mammen, E.; Yu, K.

    2009-01-01

    We develop an easily computed smooth backfitting algorithm for additive model fitting in repeated measures problems. Our methodology easily copes with various settings, such as when some covariates are the same over repeated response measurements

  13. Caustic addition system operability test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Parazin, R.E.

    1994-11-01

    This test procedure provides instructions for performing operational testing of the major components of the 241-AN-107 Caustic Addition System by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E).

  14. Caustic addition system operability test procedure

    International Nuclear Information System (INIS)

    Parazin, R.E.

    1994-11-01

    This test procedure provides instructions for performing operational testing of the major components of the 241-AN-107 Caustic Addition System by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E)

  15. 78 FR 40727 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-07-08

    ... for addition to the Procurement List for production by the nonprofit agencies listed: Products Towel.... 12/BX Cleaner, Brake Parts NSN: 6850-01-167-0678--17 oz. NPA: The Lighthouse for the Blind, St. Louis...

  16. 78 FR 35874 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-06-14

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products... Cleaner NPA: Winston-Salem Industries for the Blind, Inc., Winston-Salem, NC Contracting Activity: Defense...

  17. Characterizing Polymer Powders used in Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Bajric, Sendin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-16

    These are a set of slides that give the personal background of the author, information about his LANL organization, and information about his internship project at LANL about additive manufacturing and selective laser sintering (SLS).

  18. Additive Manufacturing of Magnesium (Mg) Alloys

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed work is to investigate additive manufacturing techniques for Mg alloys.  It will leverage off research being conducted at University of Florida and...

  19. 78 FR 9386 - Procurement List; Addition

    Science.gov (United States)

    2013-02-08

    ... Purchase From People Who Are Blind or Severely Disabled published notice of proposed addition to the...: Enterprise Professional Services, Inc., Austin, TX Contracting Activity: Dept of the Army, W40M USA MEDCOM...

  20. 77 FR 55195 - Procurement List; Additions

    Science.gov (United States)

    2012-09-07

    ... Purchase From People Who Are Blind or Severely Disabled published notice of proposed additions to the... Harmon Avenue, Fort Stewart, GA. NPA: Professional Contract Services, Inc., Austin, TX. Contracting...

  1. Additional symmetries of supersymmetric KP hierarchies

    International Nuclear Information System (INIS)

    Stanciu, S.

    1994-01-01

    We investigate the additional symmetries of several supersymmetric KP hierarchies: the SKP hierarchy of Manin and Radul, the SKP 2 hierarchy, and the Jacobian SKP hierarchy. In all three cases we find that the algebra of symmetries is isomorphic to the algebra of superdifferential operators, or equivalently SW 1+∞ . These results seem to suggest that despite their realization depending on the dynamics, the additional symmetries are kinematical in nature. (orig.)

  2. Additive Manufacturing in the Marine Corps

    Science.gov (United States)

    2015-06-01

    TERMS additive manufacturing, 3D printing, improving logistics 15. NUMBER OF PAGES 123 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT...One such method is ultrasonic agglomeration. The process produces compact snack items that are nutrient-dense and shelf-stable. Currently Army...possess outdated technology. Additionally, prices for the printers are dropping significantly.202 Therefore, the Marine Corps will not only have outdated

  3. Finding phosphorus containing additives in manufactured foods

    OpenAIRE

    Lloyd, Lyn; Gillanders, Lyn

    2012-01-01

    Dietary phosphorous (P) intake is associated with an increased serum phosphate level which is a risk factor for cardiovascular disease and increased mortality for people with chronic kidney disease. Dietary restriction of P is an important nutrition intervention as about 50% of daily intake of P is from P–containing food additives. Educating patients on P additives can effectively reduce serum P values over standard care. Avoidance can be achieved by reading the ingredient list to check for o...

  4. Challenges in Additive Manufacturing of Alumina

    OpenAIRE

    Gonzalez, Hugo

    2016-01-01

    Additive manufacturing is seen by many as the holy grail of manufacturing, the ability to produce parts nearly autonomously. Adding material rather than removing it would eliminate the need for expensive resources and machining. The recent expiration of key 3D printing patents has led to many advances in the field and has dramatically lowered the prices of 3D printers, making them accessible to the average individual. The one area where additive manufacturing is still in its infancy is in cer...

  5. Design and additive manufacture for flow chemistry.

    Science.gov (United States)

    Capel, Andrew J; Edmondson, Steve; Christie, Steven D R; Goodridge, Ruth D; Bibb, Richard J; Thurstans, Matthew

    2013-12-07

    We review the use of additive manufacturing (AM) as a novel manufacturing technique for the production of milli-scale reactor systems. Five well-developed additive manufacturing techniques: stereolithography (SL), multi-jet modelling (MJM), selective laser melting (SLM), laser sintering (LS) and fused deposition modelling (FDM) were used to manufacture a number of miniaturised reactors which were tested using a range of organic and inorganic reactions.

  6. Material Database for Additive Manufacturing Techniques

    Science.gov (United States)

    2017-12-01

    components in the field. II. BACKGROUND Additive manufacturing is a rapidly maturing process by which digital 3-D design data are used to build up...improves readiness by offering on-demand low-rate production [8, 9]. 3-D printing also enables rapid design iterations and complexity, which improve...abundant in additive manufacturing , allowing design freedom that is only limited by the material strength requirements. A set of eight conductive

  7. Evaluation of certain food additives and contaminants.

    Science.gov (United States)

    2013-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and a food contaminant with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for seven food additives (advantame; glucoamylase from Trichoderma reesei expressed in Trichoderma reesei; glycerol ester of gum rosin; glycerol ester of tall oil rosin; glycerol ester of wood rosin; nisin; and octenyl succinic acid modified gum arabic) and an assessment of dietary exposure to cadmium from cocoa and cocoa products. Specifications for the following food additives were revised: annatto extracts (solvent-extracted bixin and solvent-extracted norbixin); Benzoe tonkinensis; food additives containing aluminium and/or silicon; mineral oil (medium viscosity); modified starches; paprika extract; phosphates (analytical methods for the determination of phosphorus and revision of specifications); 3-phytase from Aspergillus niger expressed in Aspergillus niger; potassium aluminium silicate; and potassium aluminium silicate-based pearlescent pigments. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminant considered.

  8. The Development of Korea Additional Protocol System

    International Nuclear Information System (INIS)

    Shim, Hye Won; Yeo, Jin Kyun

    2008-01-01

    The Agreement between the Republic of Korea (ROK) and the IAEA for the Application of Safeguards in Connection with the Treaty on the Non-Proliferation of Nuclear Weapons (the Safeguards Agreement) entered into force on 14 November 1975. The Additional Protocol to the Safeguards Agreement (the Additional Protocol) was signed on 21 June 1999 and entered into force on 19 February 2004. ROK has been submitting annual updated reports of initial declaration on every May 15th since August 2004. Additional protocol reports were submitted through Protocol Reporter provided by IAEA. Annual declarations were simply uploaded and stored in the Accounting Information Treatment System of KINAC, which did not provide data analysis and management function. There have been demands for improvement to handle ever-increasing information. KAPS (Korea Additional Protocol System) has been developed to assist and administrate the additional protocol related works effectively. The new system enables integrated management including composition of additional protocol report and version control, periodical update of related information, results of IAEA complementary access to each facility

  9. Additive effects in radiation grafting and curing

    International Nuclear Information System (INIS)

    Viengkhou, V.; Ng, L.

    1996-01-01

    Full text: Detailed studies on the accelerative effect of novel additives in radiation grafting and curing using acrylated monomer/oligomer systems have been performed in the presence of ionising radiation and UV as sources. Methyl methacrylate (MMA) is used as typical monomer for these grafting studies in the presence of the additives with model backbone polymers, cellulose and propropylene. Additives which have been found to accelerate these grafting processes are: mineral acid, occlusion compounds like urea, thermal initiators and photoinitiators as well as multifunctional monomers such as multifunctional acrylates. The results from irradiation with gamma rays have also been compared with irradiation from a 90W UV lamp. The role of the above additives in accelerating the analogous process of radiation curing has been investigated. Acrylated urethanes, epoxies and polyesters are used as oligomers together with acrylated monomers in this work with uv lamps of 300 watts/inch as radiation source. In the UV curing process bonding between film and substrate is usually due to physical forces. In the present work the presence of additives are shown to influence the occurrence of concurrent grafting during cure thus affecting the nature of the bonding of the cured film. The conditions under which concurrent grafting with UV can occur will be examined. A mechanism for accelerative effect of these additives in both grafting and curing processes has been proposed involving radiation effects and partitioning phenomena

  10. BFR Electrolyte Additive Safety and Flammability Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Allcorn, Eric [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-13

    Lithium-ion battery safety is a critical issue in the adoption of the chemistry to larger scale applications such as transportation and stationary storage. One of the critical components impacting the safety of lithium-ion batteries is their use of highly flammable organic electrolytes. In this work, brominated flame retardants (BFR’s) – an existing class of flame retardant materials – are incorporated as additives to lithium-ion battery electrolytes with the intention to reduce the electrolyte flammability and thereby improve safety. There are a few critical needs for a successful electrolyte additive: solubility in the electrolyte, electrochemical stability over the range of battery operation, and minimal detrimental effects on battery performance. Those detrimental effects can take the form of electrolyte specific impacts, such as a reduction in conductivity, or electrode impacts, such as SEI-layer modification or chemical instability to the active material. In addition to these needs, the electrolyte additive also needs to achieve its intended purpose, which in this case is to reduce the flammability of the electrolyte. For the work conducted as part of this SPP agreement three separate BFR materials were provided by Albemarle to be tested by Sandia as additives in a traditional lithium-ion battery electrolyte. The provided BFR materials were tribromo-neopentyl alcohol, tetrabromo bisphenol A, and tribromoethylene. These materials were incorporated as separate 4 wt.% additives into a traditional lithium-ion battery electrolyte and compared to said traditional electrolyte, designated Gen2.

  11. Additive manufacturing in production: challenges and opportunities

    Science.gov (United States)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  12. Study of zirconium-addition binary systems

    International Nuclear Information System (INIS)

    Wozniakova, B.; Kuchar, L.

    1975-01-01

    The curves are given of the solid and the liquid of binary zirconium-addition systems. Most additions reduce the melting temperature of zirconium. The only known additions to increase the melting temperature are nitrogen, oxygen and hafnium. Also given are the transformation curves of the systems and the elements are given which reduce or raise the temperature of α-β transformation. From the Mendeleev table into which are plotted the curves of the solid and the liquid of binary systems it is possible to predict the properties of unknown binary systems. For the calculations of the curves of the solid and the liquid, 1860 degC was taken as the temperature of zirconium melting. For the calculations of transformation curves, 865 degC was taken as the temperature of α-β transformation. The equations are given of the curves of the solid and the liquid and of the transformation curves of some Zr-addition systems. Also given are the calculated equilibrium distribution coefficients and the equilibrium distribution coefficients of the transformation of additions in Zr and their limit values for temperatures approximating the melting point or the temperature of the transformation of pure Zr, and the values pertaining to eutectic and peritectic or eutectoid and peritectoid temperatures. (J.B.)

  13. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  14. Terminal addition in a cellular world.

    Science.gov (United States)

    Torday, J S; Miller, William B

    2018-07-01

    Recent advances in our understanding of evolutionary development permit a reframed appraisal of Terminal Addition as a continuous historical process of cellular-environmental complementarity. Within this frame of reference, evolutionary terminal additions can be identified as environmental induction of episodic adjustments to cell-cell signaling patterns that yield the cellular-molecular pathways that lead to differing developmental forms. Phenotypes derive, thereby, through cellular mutualistic/competitive niche constructions in reciprocating responsiveness to environmental stresses and epigenetic impacts. In such terms, Terminal Addition flows according to a logic of cellular needs confronting environmental challenges over space-time. A reconciliation of evolutionary development and Terminal Addition can be achieved through a combined focus on cell-cell signaling, molecular phylogenies and a broader understanding of epigenetic phenomena among eukaryotic organisms. When understood in this manner, Terminal Addition has an important role in evolutionary development, and chronic disease might be considered as a form of 'reverse evolution' of the self-same processes. Copyright © 2017. Published by Elsevier Ltd.

  15. Non-additive Effects in Genomic Selection

    Directory of Open Access Journals (Sweden)

    Luis Varona

    2018-03-01

    Full Text Available In the last decade, genomic selection has become a standard in the genetic evaluation of livestock populations. However, most procedures for the implementation of genomic selection only consider the additive effects associated with SNP (Single Nucleotide Polymorphism markers used to calculate the prediction of the breeding values of candidates for selection. Nevertheless, the availability of estimates of non-additive effects is of interest because: (i they contribute to an increase in the accuracy of the prediction of breeding values and the genetic response; (ii they allow the definition of mate allocation procedures between candidates for selection; and (iii they can be used to enhance non-additive genetic variation through the definition of appropriate crossbreeding or purebred breeding schemes. This study presents a review of methods for the incorporation of non-additive genetic effects into genomic selection procedures and their potential applications in the prediction of future performance, mate allocation, crossbreeding, and purebred selection. The work concludes with a brief outline of some ideas for future lines of that may help the standard inclusion of non-additive effects in genomic selection.

  16. Additive Manufacturing of Metastable Beta Titanium Alloys

    Science.gov (United States)

    Yannetta, Christopher J.

    Additive manufacturing processes of many alloys are known to develop texture during the deposition process due to the rapid reheating and the directionality of the dissipation of heat. Titanium alloys and with respect to this study beta titanium alloys are especially susceptible to these effects. This work examines Ti-20wt%V and Ti-12wt%Mo deposited under normal additive manufacturing process parameters to examine the texture of these beta-stabilized alloys. Both microstructures contained columnar prior beta grains 1-2 mm in length beginning at the substrate with no visible equiaxed grains. This microstructure remained constant in the vanadium system throughout the build. The microstructure of the alloy containing molybdenum changed from a columnar to an equiaxed structure as the build height increased. Eighteen additional samples of the Ti-Mo system were created under different processing parameters to identify what role laser power and travel speed have on the microstructure. There appears to be a correlation in alpha lath size and power density. The two binary alloys were again deposited under the same conditions with the addition of 0.5wt% boron to investigate the effects an insoluble interstitial alloying element would have on the microstructure. The size of the prior beta grains in these two alloys were reduced with the addition of boron by approximately 50 (V) and 100 (Mo) times.

  17. Fuel and Additive Characterization for HCCI Combustion

    International Nuclear Information System (INIS)

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-01-01

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included

  18. Excessive Additive Effect On Engine Oil Viscosity

    Directory of Open Access Journals (Sweden)

    Vojtěch Kumbár

    2014-01-01

    Full Text Available The main goal of this paper is excessive additive (for oil filling effect on engine oil dynamic viscosity. Research is focused to commercially distribute automotive engine oil with viscosity class 15W–40 designed for vans. There were prepared blends of new and used engine oil without and with oil additive in specific ratio according manufacturer’s recommendations. Dynamic viscosity of blends with additive was compared with pure new and pure used engine oil. The temperature dependence dynamic viscosity of samples was evaluated by using rotary viscometer with standard spindle. Concern was that the oil additive can moves engine oil of several viscosity grades up. It is able to lead to failure in the engine. Mathematical models were used for fitting experimental values of dynamic viscosity. Exponential fit function was selected, which was very accurate because the coefficient of determination R2 achieved high values (0.98–0.99. These models are able to predict viscosity behaviour blends of engine oil and additive.

  19. Biocompatibility of photopolymers for additive manufacturing

    Directory of Open Access Journals (Sweden)

    Leonhardt Stefan

    2016-09-01

    Full Text Available To establish photopolymers for the production of class II or class III medical products by additive manufacturing it is essential to know which components of photopolymeric systems, consisting of monomers, photoinitiators and additives, are the determining factors on their biocompatible properties. In this study the leachable substances of a cured photopolymeric system were eluted and identified by HPLC-MS detection. In addition the cured photopolymer was testes for cytotoxicity and genotoxicity according to DIN EN ISO 10993 for long time applications. The results showed that uncured residual monomers are the determining factor on the biocompatible properties of the photopolymeric system. Strategies to reduce these residual monomers in the cured photopolymer are presented.

  20. Non-additive measures theory and applications

    CERN Document Server

    Narukawa, Yasuo; Sugeno, Michio; 9th International Conference on Modeling Decisions for Artificial Intelligence (MDAI 2012)

    2014-01-01

    This book provides a comprehensive and timely report in the area of non-additive measures and integrals. It is based on a panel session on fuzzy measures, fuzzy integrals and aggregation operators held during the 9th International Conference on Modeling Decisions for Artificial Intelligence (MDAI 2012) in Girona, Spain, November 21-23, 2012. The book complements the MDAI 2012 proceedings book, published in Lecture Notes in Computer Science (LNCS) in 2012. The individual chapters, written by key researchers in the field, cover fundamental concepts and important definitions (e.g. the Sugeno integral, definition of entropy for non-additive measures) as well some important applications (e.g. to economics and game theory) of non-additive measures and integrals. The book addresses students, researchers and practitioners working at the forefront of their field.  

  1. Additive Manufacturing of Shape Memory Alloys

    Science.gov (United States)

    Van Humbeeck, Jan

    2018-04-01

    Selective Laser Melting (SLM) is an additive manufacturing production process, also called 3D printing, in which functional, complex parts are produced by selectively melting patterns in consecutive layers of powder with a laser beam. The pattern the laser beam is following is controlled by software that calculates the pattern by slicing a 3D CAD model of the part to be constructed. Apart from SLM, also other additive manufacturing techniques such as EBM (Electron Beam Melting), FDM (Fused Deposition Modelling), WAAM (Wire Arc Additive Manufacturing), LENS (Laser Engineered Net Shaping such as Laser Cladding) and binder jetting allow to construct complete parts layer upon layer. But since more experience of AM of shape memory alloys is collected by SLM, this paper will overview the potentials, limits and problems of producing NiTi parts by SLM.

  2. Effects from additives on deacetylation of chitin

    International Nuclear Information System (INIS)

    Campana Filho, Sergio P.; Signini, Roberta

    2001-01-01

    Deacetylation reactions of commercial chitin were carried out in aqueous sodium hydroxide solution at 115 deg C for 6 hours. The effect from additives (sodium borohydride or anthraquinone) and of bubbling inert gas (nitrogen or argon) on the characteristics of deacetylated samples were evaluated. Average degrees of acetylation and intrinsic viscosity were determined by 1 H NMR spectroscopy and capillary viscometry, respectively. X-ray diffraction was employed to evaluate changes in crystallinity and infrared spectroscopy was used to monitor structural changes due to deacetylation. The bubbling of inert gas during the deacetylation reaction resulted in more crystalline samples of chitosan. Deacetylation carried out without any additive produced slightly more deacetylated chitosan but they were severely depolymerized. The depolymerization process was much less important when sodium borohydride was added to the reaction medium but the addition of anthraquinone and the bubbling of nitrogen, or argon, did not have any effect, this suggests that oxygen is not required for depolymerization. (author)

  3. Additive Construction with Mobile Emplacement (ACME)

    Science.gov (United States)

    Vickers, John

    2015-01-01

    The Additive Construction with Mobile Emplacement (ACME) project is developing technology to build structures on planetary surfaces using in-situ resources. The project focuses on the construction of both 2D (landing pads, roads, and structure foundations) and 3D (habitats, garages, radiation shelters, and other structures) infrastructure needs for planetary surface missions. The ACME project seeks to raise the Technology Readiness Level (TRL) of two components needed for planetary surface habitation and exploration: 3D additive construction (e.g., contour crafting), and excavation and handling technologies (to effectively and continuously produce in-situ feedstock). Additionally, the ACME project supports the research and development of new materials for planetary surface construction, with the goal of reducing the amount of material to be launched from Earth.

  4. Evaluation of Advanced Polymers for Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Rios, Orlando [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carter, William G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kutchko, Cindy [PPG Industries, Pittsburgh, PA (United States); Fenn, David [PPG Industries, Pittsburgh, PA (United States); Olson, Kurt [PPG Industries, Pittsburgh, PA (United States)

    2017-09-08

    The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge National Laboratory (ORNL) and PPG Industries, Inc. (PPG) was to evaluate the feasibility of using conventional coatings chemistry and technology to build up material layer-by-layer. The PPG-ORNL study successfully demonstrated that polymeric coatings formulations may overcome many limitations of common thermoplastics used in additive manufacturing (AM), allow lightweight nozzle design for material deposition, and increase build rate. The materials effort focused on layer-by-layer deposition of coatings with each layer fusing together. The combination of materials and deposition results in an additively manufactured build that has sufficient mechanical properties to bear the load of additional layers, yet is capable of bonding across the z-layers to improve build direction strength. The formulation properties were tuned to enable a novel, high-throughput deposition method that is highly scalable, compatible with high loading of reinforcing fillers, and inherently low-cost.

  5. Transfer of Training in Simple Addition.

    Science.gov (United States)

    Chen, Yalin; Campbell, Jamie I D

    2017-04-18

    In recent years several researchers have proposed that skilled adults may solve single-digit addition problems (e.g. 3 + 1 = 4, 4 + 3 = 7) using a fast counting procedure. Practicing a procedure, often leads to transfer of learning and faster performance of unpracticed items. Such transfer has been demonstrated using a counting-based alphabet arithmetic task (e.g., B + 4 = C D E F) that indicated robust generalization of practice (i.e., RT gains) when untrained transfer problems at test had been implicitly practiced (e.g., practice B + 3, test B + 2 or B + 1). Here we constructed analogous simple addition problems (practice 4 + 3, test 4 + 2 or 4 + 1). In each of three experiments (total n = 108) participants received six practice blocks followed by two test blocks of new problems to examine generalization effects. Practice of addition identity-rule problems (i.e., 0 + N = N) showed complete transfer of RT gains made during practice to unpracticed items at test. In contrast, the addition ties (2 + 2, 3 + 3, etc.) presented large RT costs for unpracticed problems at test, but sped up substantially in the second test block. This pattern is consistent with item-specific strengthening of associative memory. The critical items were small non-tie additions (sum ≤ 10) for which the test problems would be implicitly practiced if counting was employed during practice. In all three experiments (and collectively) there was no evidence of generalization for these items in the first test block, but there was robust speed up when the items were repeated in the second test block. Thus, there was no evidence of the generalization of practice that would be expected if counting procedures mediated our participants' performance on small non-tie addition problems.

  6. Studies of alumina additions in zirconia - magnesia

    International Nuclear Information System (INIS)

    Muccillo, R.

    1987-01-01

    Ionic conductivity measurements have been carried out in the 500 0 C - 1000 0 C temperature range in Mg - PSZ (Partially Stabilized Zirconia) with 0.5 to 10 mol % alumina additions. All specimens were prepared by pressing followed by pre - and sintering at 1000 0 C/2h and1450 0 C/4h, respectively. Thermal histerysis of the ionic conductivity have been detected, probably due to phase changes in the Mg-PSZ samples. The results show that alumina additions up to 2.1% enhances densification with no major variations in electrical resistivity values. (Author) [pt

  7. Effusion plate using additive manufacturing methods

    Science.gov (United States)

    Johnson, Thomas Edward; Keener, Christopher Paul; Ostebee, Heath Michael; Wegerif, Daniel Gerritt

    2016-04-12

    Additive manufacturing techniques may be utilized to construct effusion plates. Such additive manufacturing techniques may include defining a configuration for an effusion plate having one or more internal cooling channels. The manufacturing techniques may further include depositing a powder into a chamber, applying an energy source to the deposited powder, and consolidating the powder into a cross-sectional shape corresponding to the defined configuration. Such methods may be implemented to construct an effusion plate having one or more channels with a curved cross-sectional geometry.

  8. Photogrammetry for Repositioning in Additive Manufacturing

    DEFF Research Database (Denmark)

    Jensen, Janus Nørtoft; Lyngby, Rasmus Ahrenkiel; Aanæs, Henrik

    2017-01-01

    In this preliminary work, we present our current status on how to use single camera photogrammetry to determine the orientation of an additively manufactured partly finished object that has been repositioned in the printing chamber, from a single image taken with a calibrated camera, and comparing...... this to the CAD model of the object. We describe how this knowledge can be used to update the machine code of the printer such that printing of the object can be resumed in the new location. This opens possibilities for embedding and assembling foreign parts into the additive manufacturing pipeline, adding...

  9. The structure of additive conservation laws

    International Nuclear Information System (INIS)

    Helmut Reen

    1979-01-01

    All additive conserved quantities are listed for a system with short range central force interaction between the particles: a special case shows up in Boltzmann H-theorem and his derivation of the Maxwell velocity distribution. It is concluded that in classical mechanics of mass points there are no other additive conservation laws besides of energy, momentum, angular momentum and center of mass motion. A generator is considered of a symmetry transformation defined as integral over a conserved local current density where the latter, in general, needs not be covariant under translations

  10. 77 FR 13009 - Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel...

    Science.gov (United States)

    2012-03-05

    ... Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel Pathways Under the Renewable Fuel Standard Program AGENCY: Environmental Protection Agency (EPA). ACTION: Withdrawal... Renewable Fuel Standard program regulations. Because EPA received adverse comment, we are withdrawing the...

  11. 42 CFR 86.20 - Additional conditions.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 86.20 Section 86.20 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES GRANTS FOR EDUCATION PROGRAMS IN OCCUPATIONAL SAFETY AND HEALTH Occupational Safety and Health Training Grants § 86.2...

  12. 17 CFR 37.7 - Additional requirements.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Additional requirements. 37.7 Section 37.7 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES... of section 5c(c) of the Act and § 40.2 of this chapter, derivatives transaction execution facilities...

  13. Additional reactor protection system of RBMK-1500

    International Nuclear Information System (INIS)

    1999-01-01

    Analysis of anticipated transients without scram of RBMK-1500 reactor showed that additional reactor protection system is required. Data of accident analysis in the case of loose of external electric power and loose of vacuum in condensers of turbines are provided

  14. Neue Werkstoffe über additive Fertigung

    OpenAIRE

    Günther, Johannes; Niendorf, Thomas

    2016-01-01

    Über die additive Fertigung, oftmals bezeichnet als 3D-Druck, lassen sich Bauteile nahezu beliebiger geometrischer Komplexität herstellen. Gleichzeitig lassen die Prozessrandbedingungen die direkte Einstellung der Mikrostruktur in den verwendeten metallischen Werkstoffen zu. Hieraus ergeben sich weitreichende Möglichkeiten bezüglich der Eigenschaftsoptimierung aktueller Hochleistungswerkstoffe.

  15. Additive Manufacturing of Biomaterials, Tissues, and Organs

    NARCIS (Netherlands)

    Zadpoor, Amir A; Malda, Jos

    2017-01-01

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further

  16. Additive Manufacturing of Biomaterials, Tissues, and Organs

    NARCIS (Netherlands)

    Zadpoor, Amir A; Malda, Jos|info:eu-repo/dai/nl/412461099

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further

  17. Probabilistic fuzzy systems as additive fuzzy systems

    NARCIS (Netherlands)

    Almeida, R.J.; Verbeek, N.; Kaymak, U.; Costa Sousa, da J.M.; Laurent, A.; Strauss, O.; Bouchon-Meunier, B.; Yager, R.

    2014-01-01

    Probabilistic fuzzy systems combine a linguistic description of the system behaviour with statistical properties of data. It was originally derived based on Zadeh’s concept of probability of a fuzzy event. Two possible and equivalent additive reasoning schemes were proposed, that lead to the

  18. Leaching of Plastic Additives to Marine Organisms

    NARCIS (Netherlands)

    Koelmans, A.A.; Besseling, E.; Foekema, E.M.

    2014-01-01

    It is often assumed that ingestion of microplastics by aquatic species leads to increased exposure to plastic additives. However, experimental data or model based evidence is lacking. Here we assess the potential of leaching of nonylphenol (NP) and bisphenol A (BPA) in the intestinal tracts of

  19. Overview of Food Ingredients, Additives and Colors

    Science.gov (United States)

    ... In addition to maintaining the quality of the food, they help control contamination that can cause foodborne illness, including life-threatening ... still be considered safe. Regulations known as Good Manufacturing ... limit the amount of food ingredients used in foods to the amount necessary ...

  20. Polymeric additive performance in closed whitewater systems

    Science.gov (United States)

    T. H. Wegner

    1984-01-01

    “With more stringent requirements on discharge water quality and with escalating water treatment costs, water recycling within the paper mill is of growing importance. A serious problem resulting from more white-water recycling is reduced drainage and fiber or fines retention because of diminished polymeric additive performance. To provide better insight for overcoming...

  1. 76 FR 80345 - Procurement List; Additions

    Science.gov (United States)

    2011-12-23

    ... ARMY, W6QL ECC MIAMI DIV, MIAMI, FL. Service Type/Location: Industrial Laundry Service, Bureau of... Procurement List. SUMMARY: This action adds services to the Procurement List that will be provided by... concerning capability of qualified nonprofit agencies to provide the services and impact of the additions on...

  2. 78 FR 48656 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-08-09

    ... Oceanic and Atmospheric Administration, Boulder, CO. Service Type/Location: Laundry Service, US Coast... Additions to the Procurement List. SUMMARY: The Committee is proposing to add products and services to the... required to procure the products and services listed below from nonprofit agencies employing persons who...

  3. 77 FR 27736 - Procurement List Additions

    Science.gov (United States)

    2012-05-11

    ... Research Laboratory, Washington, DC. Service Type/Location: Laundry, Refurbishment, and Warehouse Services... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be... products and services and impact of the additions on the current or most recent contractors, the Committee...

  4. 77 FR 29596 - Procurement List Proposed Additions

    Science.gov (United States)

    2012-05-18

    .../Location: Laundry Service, Veterans Administration Medical Center (VAMC), (offsite: 1809 W 2nd Avenue... Additions to the Procurement List. SUMMARY: The Committee is proposing to add products and services to the... identified in this notice will be required to procure the products and services listed below from nonprofit...

  5. 75 FR 14576 - Procurement List Additions

    Science.gov (United States)

    2010-03-26

    ... Inspection Service, Minneapolis, MN. M.R. Laundry Products NSN: MR 1103--Heavy Duty Laundry Bag. NSN: MR 1104... procurement list. SUMMARY: This action adds to the Procurement List products and services to be furnished by... products and services and impact of the additions on the current or most recent contractors, the Committee...

  6. Powder Characterization and Optimization for Additive Manufacturing

    NARCIS (Netherlands)

    Cordova, Laura; Campos, Mónica; Tinga, Tiedo

    2017-01-01

    Achieving the optimal quality for Additive Manufactured (AM) parts does not only depend on setting the right process parameters. Material feedstock also plays an important role when aiming for high performance products. The metal AM processes that are most applicable to industry, Powder Bed Fusion

  7. Augmented Reality Interfaces for Additive Manufacturing

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Frisvad, Jeppe Revall

    2017-01-01

    This paper explores potential use cases for using augmented reality (AR) as a tool to operate industrial machines. As a baseline we use an additive manufacturing system, more commonly known as a 3D printer. We implement novel augmented interfaces and controls using readily available open source...

  8. Designing for Color in Additive Manufacturing

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Luongo, Andrea; Frisvad, Jeppe Revall

    2016-01-01

    In this paper we present a color design pipeline for 3D printed or additively manufactured parts. We demonstrate how to characterize and calibrate a commercial printer and how to obtain its forward and backward color transformation models. We present results from our assistive color design tool...

  9. Additive Manufacturing: From Rapid Prototyping to Flight

    Science.gov (United States)

    Prater, Tracie

    2015-01-01

    Additive manufacturing (AM) offers tremendous promise for the rocket propulsion community. Foundational work must be performed to ensure the safe performance of AM parts. Government, industry, and academia must collaborate in the characterization, design, modeling, and process control to accelerate the certification of AM parts for human-rated flight.

  10. Predicting Color Output of Additive Manufactured Parts

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Aanæs, Henrik

    2015-01-01

    In this paper we address the colorimetric performance of a multicolor additive manufacturing process. A method on how to measure and characterize color performance of said process is presented. Furthermore, a method on predicting the color output is demonstrated, allowing for previsualization...

  11. 78 FR 53734 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-08-30

    ...: Committee for Purchase From People Who Are Blind or Severely Disabled, 1401 S Clark Street, Suite 10800... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  12. 78 FR 77105 - Procurement List; Proposed Addition

    Science.gov (United States)

    2013-12-20

    ... People Who Are Blind or Severely Disabled, 1401 S. Clark Street, Suite 10800, Arlington, Virginia, 22202... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Addition AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  13. 78 FR 50040 - Procurement List, Proposed Additions

    Science.gov (United States)

    2013-08-16

    ... People Who Are Blind or Severely Disabled, 1401 S Clark Street, Suite 10800, Arlington, Virginia, 22202... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List, Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  14. 78 FR 19248 - Procurement List; Proposed Addition

    Science.gov (United States)

    2013-03-29

    ... Purchase From People Who Are Blind or Severely Disabled, 1401 S. Clark Street, Suite 10800, Arlington... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Addition AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  15. Power transformer additional load losses separation procedure

    Directory of Open Access Journals (Sweden)

    Kostić Miloje M.

    2011-01-01

    Full Text Available The proposed procedure is based on the fact that total transformer losses (PLL1,n, determined by short circuit test, can be separated into two components: the eddy current losses in the windings (PEC1,n and stray flux losses (PSL1,n in iron parts of construction as well as in the transformer tank walls. The total additional load losses, PLLd1 and PLLdh, are determined by short circuit test results, conducted at rated frequency (f1 and at increased harmonic frequency (fh=h*f1. Using so obtained total additional load losses, PLLd1 and PLLdh, which can be expressed in the form PLLdh=PEC1,n*h2 + PSL1,n*h, the corresponding rate additional load losses values PEC1,n and PSL1,n are derived. At the end, for given load with predefined high harmonics content, (Ih/I1n, relative to rated current, the total additional load losses value ΣPLLdh > PLLd1, is found. In such a way all harmonics up to hmax are taken into account.

  16. 19 CFR 191.103 - Additional requirements.

    Science.gov (United States)

    2010-04-01

    ... which the alcohol was withdrawn; (iv) Date of withdrawal; (v) Serial number of the tax-paid stamp or... 19 Customs Duties 2 2010-04-01 2010-04-01 false Additional requirements. 191.103 Section 191.103 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE...

  17. Acid Rain Analysis by Standard Addition Titration.

    Science.gov (United States)

    Ophardt, Charles E.

    1985-01-01

    The standard addition titration is a precise and rapid method for the determination of the acidity in rain or snow samples. The method requires use of a standard buret, a pH meter, and Gran's plot to determine the equivalence point. Experimental procedures used and typical results obtained are presented. (JN)

  18. Additivity properties of a Gaussian channel

    International Nuclear Information System (INIS)

    Giovannetti, Vittorio; Lloyd, Seth

    2004-01-01

    The Amosov-Holevo-Werner conjecture implies the additivity of the minimum Renyi entropies at the output of a channel. The conjecture is proven true for all Renyi entropies of integer order greater than two in a class of Gaussian bosonic channel where the input signal is randomly displaced or where it is coupled linearly to an external environment

  19. Finding phosphorus containing additives in manufactured foods

    Directory of Open Access Journals (Sweden)

    Lyn Lloyd

    2012-06-01

    This reflects manufactured foods in NZ and it is likely that these results could be generalized to countries with similar food patterns and supplies. Quantitative data in manufactured foods is unlikely to be available to guide patient choice so qualitative information of where to find P additives can be helpful.

  20. ADHD Diet: Do Food Additives Cause Hyperactivity?

    Science.gov (United States)

    ... 3 fatty acids found in certain types of fish, flaxseed and other foods. With David C. Agerter, M.D Food colours and hyperactivity. NHS Choices. http://www.nhs.uk/conditions/food-additive-intolerance/Pages/Introduction.aspx. Accessed Sept. 18, 2017. ...

  1. Additivity of quark masses in gauge theories

    International Nuclear Information System (INIS)

    Scadron, M.D.

    1987-01-01

    It is shown that, in spite of the confinement of quarks in (color-singlet) hadrons, effective quark masses of all types (dynamically generated, constituent and current masses), naturally form hadron masses in an additivity fashion. For the purposes of brevity, the discussion is limited primarily to the nonstrange flavor sector

  2. 76 FR 57719 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-09-16

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products NSN: 7930-00-NIB-0583--Refills, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0584--Starter Kit, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0585...

  3. 78 FR 12296 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-02-22

    ... services are proposed for addition to the Procurement List for production by the nonprofit agencies listed... and Trailer Wash, 55 GL NSN: 7930-00-NIB-0649--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 5 GL NSN: 7930-00-NIB-0650--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 55 GL...

  4. Additive manufacturing: From implants to organs

    African Journals Online (AJOL)

    Additive manufacturing (AM) constructs 3D objects layer by layer under computer control from 3D models. 3D printing is one ... anatomical models for surgery planning, and design and construction ... production of implants, particularly to replace bony structures, is ... Manufactured organs are, however, an elusive goal.

  5. Application of Natural Mineral Additives in Construction

    Science.gov (United States)

    Linek, Malgorzata; Nita, Piotr; Wolka, Paweł; Zebrowski, Wojciech

    2017-12-01

    The article concerns the idea of using selected mineral additives in the pavement quality concrete composition. The basis of the research paper was the modification of cement concrete intended for airfield pavements. The application of the additives: metakaolonite and natural zeolite was suggested. Analyses included the assessment of basic physical properties of modifiers. Screening analysis, assessment of micro structure and chemical microanalysis were conducted in case of these materials. The influence of the applied additives on the change of concrete mix parameters was also presented. The impact of zeolite and metakaolinite on the mix density, oxygen content and consistency class was analysed. The influence of modifiers on physical and mechanical changes of the hardened cement concrete was discussed (concrete density, compressive strength and bending strength during fracturing) in diversified research periods. The impact of the applied additives on the changes of internal structure of cement concrete was discussed. Observation of concrete micro structure was conducted using the scanning electron microscope. According to the obtained lab test results, parameters of the applied modifiers and their influence on changes of internal structure of cement concrete are reflected in the increase of mechanical properties of pavement quality concrete. The increase of compressive and bending strength in case of all analysed research periods was proved.

  6. 76 FR 43988 - Procurement List; Additions

    Science.gov (United States)

    2011-07-22

    ... this work, based on applicable experience. Finally, the purpose of the JWOD Act and the responsibility... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be...

  7. 7 CFR 1735.18 - Additional equity.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE GENERAL POLICIES, TYPES OF LOANS, LOAN REQUIREMENTS-TELECOMMUNICATIONS PROGRAM Loan Purposes and Basic Policies § 1735.18 Additional equity. If determined by the Administrator to be necessary for loan security, a borrower applying for an initial loan shall increase its net worth as a percentage of assets to...

  8. Sintering of magnesia: effect of additives

    Indian Academy of Sciences (India)

    Effect of different additives, namely Cr2O3, Fe2O3 and TiO2, up to 2 wt% was studied on the sinter- ing and .... mental distribution of the components is shown in figure 7. It shows ... Chiang Y M, Birniand D and Kingery W 1996 Physical ceram-.

  9. 77 FR 34026 - Procurement List; Proposed Additions

    Science.gov (United States)

    2012-06-08

    ... provide interested persons an opportunity to submit comments on the proposed actions. Additions If the..., Department of Homeland Security (DHS), Immigration and Customs Enforcement (ICE), Office of Chief Counsel... Institute, Inc., San Antonio, TX. Contracting Activity: Department of Homeland Security, U.S. Immigration...

  10. (ajst) additive main effects and multiplicative

    African Journals Online (AJOL)

    2013-08-02

    Aug 2, 2013 ... genotypes assessed by biplot analysis showed that the most stable ... biplot is a useful tool for the analysis of multi-environment trial (MET) data. ... multiplicative components, extracting first the additive ... The AMMI analysis of variance of cassava harvest index of the 8 .... wheat mega-environments in Iran.

  11. Stability issues in reconstitution by weapon addition

    Energy Technology Data Exchange (ETDEWEB)

    Canavan, G.H.

    1997-08-01

    Reconstitution of strategic forces by the unilateral uploading of additional weapons from initially symmetric modest force levels reduces first strike stability. These changes are quantified and traced to changes in first and second strike costs in a model of missile exchanges in which both strikes are optimized analytically.

  12. 76 FR 26279 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-05-06

    ...-service area; clean and sanitize food service equipment, utensil cleaning, and dishwashing; clean pots... additions to the Procurement List. SUMMARY: The Committee is proposing to add services to the Procurement... in this notice will be required to procure the services listed below from nonprofit agencies...

  13. 77 FR 60969 - Procurement List; Additions

    Science.gov (United States)

    2012-10-05

    ... Are Blind or Severely Disabled published a notice for additions to the Procurement List with the... Committee for Purchase From People Who Are Blind or Severely Disabled published notices of proposed..., Phoenix, AZ. Service Type/Location: Custodial and Grounds Maintenance Services, Austin Courthouse, 501...

  14. 27 CFR 5.33 - Additional requirements.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Additional requirements. 5.33 Section 5.33 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Labeling Requirements for...

  15. 76 FR 41687 - Food Additives Permitted for Direct Addition to Food for Human Consumption; Hydroxypropyl Cellulose

    Science.gov (United States)

    2011-07-15

    ... Organization and the World Health Organization (FAO/WHO) Expert Committee for Food Additives (JECFA) has... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 172 [Docket No. FDA-2010-F-0103] Food Additives Permitted for Direct Addition to Food for Human Consumption...

  16. Additional Samples: Where They Should Be Located

    International Nuclear Information System (INIS)

    Pilger, G. G.; Costa, J. F. C. L.; Koppe, J. C.

    2001-01-01

    Information for mine planning requires to be close spaced, if compared to the grid used for exploration and resource assessment. The additional samples collected during quasimining usually are located in the same pattern of the original diamond drillholes net but closer spaced. This procedure is not the best in mathematical sense for selecting a location. The impact of an additional information to reduce the uncertainty about the parameter been modeled is not the same everywhere within the deposit. Some locations are more sensitive in reducing the local and global uncertainty than others. This study introduces a methodology to select additional sample locations based on stochastic simulation. The procedure takes into account data variability and their spatial location. Multiple equally probable models representing a geological attribute are generated via geostatistical simulation. These models share basically the same histogram and the same variogram obtained from the original data set. At each block belonging to the model a value is obtained from the n simulations and their combination allows one to access local variability. Variability is measured using an uncertainty index proposed. This index was used to map zones of high variability. A value extracted from a given simulation is added to the original data set from a zone identified as erratic in the previous maps. The process of adding samples and simulation is repeated and the benefit of the additional sample is evaluated. The benefit in terms of uncertainty reduction is measure locally and globally. The procedure showed to be robust and theoretically sound, mapping zones where the additional information is most beneficial. A case study in a coal mine using coal seam thickness illustrates the method

  17. Machinability of structural steels with calcium addition

    International Nuclear Information System (INIS)

    Pytel, S.; Zadecki, M.

    2003-01-01

    The machinability of the plain carbon and low alloy structural steels with carbon content of 0.1-0.6% is briefly discussed in the first part of the paper. In the experimental part a dependence between the addition of calcium and some changes in sulphide and oxide inclusions morphology is presented. The Volvo test for measurement of machinability index B i has been applied. Using the multiple regression methods two relationships between machinability index B i and stereological parameters of non-metallic inclusions as well as hardness of the steels have been calculated. The authors have reached the conclusion that owing to the changes in inclusion chemical composition and geometry as result of calcium addition the machinability index of the steel can be higher. (author)

  18. [Total analysis of organic rubber additives].

    Science.gov (United States)

    He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

    2010-03-01

    In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

  19. Microbial biosurfactants as additives for food industries.

    Science.gov (United States)

    Campos, Jenyffer Medeiros; Stamford, Tânia Lúcia Montenegro; Sarubbo, Leonie Asfora; de Luna, Juliana Moura; Rufino, Raquel Diniz; Banat, Ibrahim M

    2013-01-01

    Microbial biosurfactants with high ability to reduce surface and interfacial surface tension and conferring important properties such as emulsification, detergency, solubilization, lubrication and phase dispersion have a wide range of potential applications in many industries. Significant interest in these compounds has been demonstrated by environmental, bioremediation, oil, petroleum, food, beverage, cosmetic and pharmaceutical industries attracted by their low toxicity, biodegradability and sustainable production technologies. Despite having significant potentials associated with emulsion formation, stabilization, antiadhesive and antimicrobial activities, significantly less output and applications have been reported in food industry. This has been exacerbated by uneconomical or uncompetitive costing issues for their production when compared to plant or chemical counterparts. In this review, biosurfactants properties, present uses and potential future applications as food additives acting as thickening, emulsifying, dispersing or stabilising agents in addition to the use of sustainable economic processes utilising agro-industrial wastes as alternative substrates for their production are discussed. © 2013 American Institute of Chemical Engineers.

  20. The teratology testing of food additives.

    Science.gov (United States)

    Barrow, Paul C; Spézia, François

    2013-01-01

    The developmental and reproductive toxicity testing (including teratogenicity) of new foods and food additives is performed worldwide according to the guidelines given in the FDA Redbook. These studies are not required for substances that are generally recognized as safe, according to the FDA inventory. The anticipated cumulated human exposure level above which developmental or reproduction studies are required depends on the structure-alert category. For food additives of concern, both developmental (prenatal) and reproduction (multigeneration) studies are required. The developmental studies are performed in two species, usually the rat and the rabbit. The reproduction study is generally performed in the rat. The two rat studies are preferably combined into a single experimental design, if possible. The test methods described in the FDA Redbook are similar to those specified by the OECD for the reproductive toxicity testing of chemicals.

  1. [Trends in the utilization of food additives].

    Science.gov (United States)

    Szűcs, Viktória; Bánáti, Diána

    2013-11-17

    The frequent media reports on food additives weakened consumers' trust in food producers and food control authorities as well. Furthermore, consumers' uncertainty is also raised by the fact that they obtain their information from inadequate, mistrustful sources and, therefore, consumers might avoid the consumption of certain foodstuffs. While food producers may react by replacing artificial components by natural ones, they try to emphasize the favourable characteristics of their products. The authors describe the main trends and efforts related to food additives. On the basis of the overview it can be concluded that - besides taking into consideration consumers' needs - product development and research directions are promising. Food producers' efforts may help to restore consumer confidence and trust and they may help them to have informed choice.

  2. Utilization of curve offsets in additive manufacturing

    Science.gov (United States)

    Haseltalab, Vahid; Yaman, Ulas; Dolen, Melik

    2018-05-01

    Curve offsets are utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is for generating head trajectories. In a point-wise AM process, a correct tool-path in each layer can reduce lots of costs and increase the surface quality of the fabricated parts. In this study, different curve offset generation algorithms are analyzed to show their capabilities and disadvantages through some test cases and improvements on their drawbacks are suggested.

  3. Evolution of solidification texture during additive manufacturing

    Science.gov (United States)

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-01-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246

  4. Additional gleaning of fusion energy development

    International Nuclear Information System (INIS)

    Yamamoto, Kenzo; Koizumi, Koichi

    2002-09-01

    This report summarizes the major topics in the history of fusion energy development in Japan from its dawn to the tokamak fusion experimental reactor, ITER. The domestic circumstances and situation in foreign countries in those days, and the details of each decision and discussion, are described. Since my previous writing, 'Forty years for Nuclear Fusion Energy Development - Big Science in Japan (1997, ERC Press. Co. Ltd.)', was a book which briefly summarize a large quantity of documents on the history, there are many points, which require additional detail explanation. This time, I selected and extracted major topics in the fusion research history, and added additional descriptions and my comments so as to supplement my previous writing. (author)

  5. Additive manufacturing technology in reconstructive surgery.

    Science.gov (United States)

    Fuller, Scott C; Moore, Michael G

    2016-10-01

    Technological advances have been part and parcel of modern reconstructive surgery, in that practitioners of this discipline are continually looking for innovative ways to perfect their craft and improve patient outcomes. We are currently in a technological climate wherein advances in computers, imaging, and science have coalesced with resulting innovative breakthroughs that are not merely limited to improved outcomes and enhanced patient care, but may provide novel approaches to training the next generation of reconstructive surgeons. New developments in software and modeling platforms, imaging modalities, tissue engineering, additive manufacturing, and customization of implants are poised to revolutionize the field of reconstructive surgery. The interface between technological advances and reconstructive surgery continues to expand. Additive manufacturing techniques continue to evolve in an effort to improve patient outcomes, decrease operative time, and serve as instructional tools for the training of reconstructive surgeons.

  6. Additive manufacturing of polymer-derived ceramics

    Science.gov (United States)

    Eckel, Zak C.; Zhou, Chaoyin; Martin, John H.; Jacobsen, Alan J.; Carter, William B.; Schaedler, Tobias A.

    2016-01-01

    The extremely high melting point of many ceramics adds challenges to additive manufacturing as compared with metals and polymers. Because ceramics cannot be cast or machined easily, three-dimensional (3D) printing enables a big leap in geometrical flexibility. We report preceramic monomers that are cured with ultraviolet light in a stereolithography 3D printer or through a patterned mask, forming 3D polymer structures that can have complex shape and cellular architecture. These polymer structures can be pyrolyzed to a ceramic with uniform shrinkage and virtually no porosity. Silicon oxycarbide microlattice and honeycomb cellular materials fabricated with this approach exhibit higher strength than ceramic foams of similar density. Additive manufacturing of such materials is of interest for propulsion components, thermal protection systems, porous burners, microelectromechanical systems, and electronic device packaging.

  7. Effects of additives on PVG dosifilm

    Energy Technology Data Exchange (ETDEWEB)

    Wenxiu, Chen; Liu, Aiguo [Beijing Normal Univ., BJ (China). Dept. of Chemistry

    1995-03-01

    Dosifilm PVG is a new radiochromic film dosimeter composed of matrix material polyvinyl butyral (PVB), leuco malachite green (LMG) and additive halogenated organic compound (RX), etc. The control of the dose range on PVG dosifilm was examined. The addition of halogenated compounds played an important role in the radiation reaction of LMG beyond the concentration of LMG. Bromide is more effective than chloride in this system, the oxidative species are X {center_dot} and X{sub 2} {center_dot} {sup -}. PVB with N-bromosuccinimide (NBS) can induce the oxidation of LMG before irradiation. The reaction mechanism of PVG was discussed. Different linear ranges of radiation response on PVG dosifilm could be controlled by alternating the relative concentrations of halogenated compounds and LMG. (author).

  8. Laser-Based Additive Manufacturing of Zirconium

    Directory of Open Access Journals (Sweden)

    Himanshu Sahasrabudhe

    2018-03-01

    Full Text Available Additive manufacturing of zirconium is attempted using commercial Laser Engineered Net Shaping (LENSTM technique. A LENSTM-based approach towards processing coatings and bulk parts of zirconium, a reactive metal, aims to minimize the inconvenience of traditional metallurgical practices of handling and processing zirconium-based parts that are particularly suited to small volumes and one-of-a-kind parts. This is a single-step manufacturing approach for obtaining near net shape fabrication of components. In the current research, Zr metal powder was processed in the form of coating on Ti6Al4V alloy substrate. Scanning electron microscopy (SEM and energy dispersive spectroscopy (EDS as well as phase analysis via X-ray diffraction (XRD were studied on these coatings. In addition to coatings, bulk parts were also fabricated using LENS™ from Zr metal powders, and measured part accuracy.

  9. Additive derivations on algebras of measurable operators

    International Nuclear Information System (INIS)

    Ayupov, Sh.A.; Kudaybergenov, K.K.

    2009-08-01

    Given a von Neumann algebra M we introduce the so-called central extension mix(M) of M. We show that mix(M) is a *-subalgebra in the algebra LS(M) of all locally measurable operators with respect to M, and this algebra coincides with LS(M) if and only if M does not admit type II direct summands. We prove that if M is a properly infinite von Neumann algebra then every additive derivation on the algebra mix(M) is inner. This implies that on the algebra LS(M), where M is a type I ∞ or a type III von Neumann algebra, all additive derivations are inner derivations. (author)

  10. Effects of additives on PVG dosifilm

    International Nuclear Information System (INIS)

    Chen Wenxiu; Liu, Aiguo

    1995-01-01

    Dosifilm PVG is a new radiochromic film dosimeter composed of matrix material polyvinyl butyral (PVB), leuco malachite green (LMG) and additive halogenated organic compound (RX), etc. The control of the dose range on PVG dosifilm was examined. The addition of halogenated compounds played an important role in the radiation reaction of LMG beyond the concentration of LMG. Bromide is more effective than chloride in this system, the oxidative species are X · and X 2 · - . PVB with N-bromosuccinimide (NBS) can induce the oxidation of LMG before irradiation. The reaction mechanism of PVG was discussed. Different linear ranges of radiation response on PVG dosifilm could be controlled by alternating the relative concentrations of halogenated compounds and LMG. (author)

  11. The addition of disilanes to cumulenes

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yiyuan [Iowa State Univ., Ames, IA (United States)

    1997-10-08

    The syntheses of silicon-containing compounds and the studies of their rearrangements have been active research areas in the Barton research group. Previously, the addition of disilanes to acetylenes was studied in the group and an intramolecular 2S + 2A mechanism has been proposed. In this thesis, the work is focused on the addition of disilanes to cumulenes. The syntheses of the precursors are discussed and the possible mechanisms for their thermal, photochemical and catalytic rearrangements are proposed. Conjugated organic polymers have been studied in the group since 1985 because of their potential for exhibiting high electroconductivity, photoconductivity, strong non-linear optical response and intense fluorescence. In the second section of this dissertation, the synthesis and property studies of poly(phenylene vinylene) analogues are discussed.

  12. Electrolyte Additives for Phosphoric Acid Fuel Cells

    DEFF Research Database (Denmark)

    Gang, Xiao; Hjuler, H.A.; Olsen, C.A.

    1993-01-01

    , as a fuel-cell performance with the modified electrolytes. Specific conductivity measurements of some of the modified phosphoric acid electrolytes are reported. At a given temperature, the conductivity of the C4F9SO3K-modified electrolyte decreases with an increasing amount of the additive; the conductivity...... of the remains at the same value as the conductivity of the pure phosphoric acid. At a given composition, the conductivity of any modified electrolyte increases with temperature. We conclude that the improved cell performance for modified electrolytes is not due to any increase in conductivity.......Electrochemical characteristics of a series of modified phosphoric acid electrolytes containing fluorinated car on compounds and silicone fluids as additives are presented. When used in phosphoric acid fuel cells, the modified electrolytes improve the performance due to the enhanced oxygen...

  13. Femtosecond laser additive manufacturing of YSZ

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jian; Bai, Shuang [PolarOnyx, Inc., San Jose, CA (United States)

    2017-04-15

    Laser additive manufacturing (LAM) of Yttria-Stabilized Zirconia (YSZ) is investigated using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. High-density (>99%) YSZ part with refined grain and increased hardness was obtained. Microstructure features of fabricated specimens were studied with SEM, EDX, the measured micro hardness is achieved as high as 18.84 GPa. (orig.)

  14. Selection of Additive Manufacturing (AM) Equipment

    Science.gov (United States)

    2017-04-01

    FOLLOW THE PROCEDURES IN DoD 5200.22-M, INDUSTRIAL SECURITY MANUAL, SECTION II-19 OR DoD 5200.1-R, INFORMATION SECURITY PROGRAM REGULATION...axis subtractive machining center. The hybrid approach is gaining interest in the traditionally subtractive machine tool industry as the additive...systems typically consists of a build vat, feedstock hoppers , a material spreading device, and an energy source. The material spreading device

  15. Addition of malodorants to lighter gas

    DEFF Research Database (Denmark)

    Neela, Vasu; von Solms, Nicolas

    2014-01-01

    Relevant thermodynamic and phase behavior of mixtures created by adding malodorants to lighter gas to discourage its abuse have been studied. The influence of physical factors such as temperature, pressure and concentration of the selected substances with lighter gas is studied. This work represe......-Plus-Association (CPA) - an equation of state - to model the fluid phase and solubility behavior of the mixtures formed by the various additives with butane....

  16. Object attributes combine additively in visual search

    OpenAIRE

    Pramod, R. T.; Arun, S. P.

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in in...

  17. Additive Manufacturing for Affordable Rocket Engines

    Science.gov (United States)

    West, Brian; Robertson, Elizabeth; Osborne, Robin; Calvert, Marty

    2016-01-01

    Additive manufacturing (also known as 3D printing) technology has the potential to drastically reduce costs and lead times associated with the development of complex liquid rocket engine systems. NASA is using 3D printing to manufacture rocket engine components including augmented spark igniters, injectors, turbopumps, and valves. NASA is advancing the process to certify these components for flight. Success Story: MSFC has been developing rocket 3D-printing technology using the Selective Laser Melting (SLM) process. Over the last several years, NASA has built and tested several injectors and combustion chambers. Recently, MSFC has 3D printed an augmented spark igniter for potential use the RS-25 engines that will be used on the Space Launch System. The new design is expected to reduce the cost of the igniter by a factor of four. MSFC has also 3D printed and tested a liquid hydrogen turbopump for potential use on an Upper Stage Engine. Additive manufacturing of the turbopump resulted in a 45% part count reduction. To understanding how the 3D printed parts perform and to certify them for flight, MSFC built a breadboard liquid rocket engine using additive manufactured components including injectors, turbomachinery, and valves. The liquid rocket engine was tested seven times in 2016 using liquid oxygen and liquid hydrogen. In addition to exposing the hardware to harsh environments, engineers learned to design for the new manufacturing technique, taking advantage of its capabilities and gaining awareness of its limitations. Benefit: The 3D-printing technology promises reduced cost and schedule for rocket engines. Cost is a function of complexity, and the most complicated features provide the largest opportunities for cost reductions. This is especially true where brazes or welds can be eliminated. The drastic reduction in part count achievable with 3D printing creates a waterfall effect that reduces the number of processes and drawings, decreases the amount of touch

  18. Study of plutonium-addition systems

    International Nuclear Information System (INIS)

    Kuchar, L.; Wozniakova, B.

    1976-11-01

    Steady state phase diagrams and calculated values of concentrations on the solid and liquid curves, the steady state distribution coefficient and thermodynamic control are presented for temperatures ranging from the eutectic reaction temperatures to the Pu melting point temperature for binary systems plutonium-addition (Mg, Al, Si, Ti, Mn, Fe, Co, Ni, Cu, Zn, Ga, Zr, Ru, Os, Th, U, Np). (J.P.)

  19. TECHNOLOGY OF PLANT FEED ADDITIVES FOR POULTRY

    OpenAIRE

    Koshchaeva O. V.; Kalyuzhniy S. A.; Khathakumov S. S.; Likhoman A. V.

    2014-01-01

    The work on the development of technology for production of feed additives from soybean seeds and fruits of pumpkin has shown that the use of sodium bisulfate and lactic acid bacteria provide a high content of carotene in pumpkin paste (948 mg / kg and 819 mg / kg, respectively), and grinding soy before drying protein and vitamin supplements raises safety of carotene without destroying the urease

  20. Supplier Selection Using Weighted Utility Additive Method

    Science.gov (United States)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  1. MAFJ: some simple additions to MAFCO

    International Nuclear Information System (INIS)

    Finan, C.H. III; McNamara, B.

    1976-01-01

    MAFJ is a revision of the MAFCO code which generates magnetic fields (B) resulting from collections of current elements. In addition to the original MAFCO's capabilities, MAFJ follows field lines through a region of interest and calculates integrals of functions along these lines. It can also generate three-dimensional grids of B. MAFJ runs from eight to 15 times faster than MAFCO, depending on the types of current elements chosen. 2 tables

  2. LAVA: Large scale Automated Vulnerability Addition

    Science.gov (United States)

    2016-05-23

    LAVA: Large-scale Automated Vulnerability Addition Brendan Dolan -Gavitt∗, Patrick Hulin†, Tim Leek†, Fredrich Ulrich†, Ryan Whelan† (Authors listed...released, and thus rapidly become stale. We can expect tools to have been trained to detect bugs that have been released. Given the commercial price tag...low TCN) and dead (low liveness) program data is a powerful one for vulnera- bility injection. The DUAs it identifies are internal program quantities

  3. Additional chromosome abnormalities in chronic myeloid leukemia

    Directory of Open Access Journals (Sweden)

    Hui-Hua Hsiao

    2011-02-01

    Full Text Available The Philadelphia (Ph chromosome and/or Breakpoint cluster region-Abelson leukemia virus oncogene transcript are unique markers for chronic myeloid leukemia (CML. However, CML demonstrates heterogeneous presentations and outcomes. We analyzed the cytogenetic and molecular results of CML patients to evaluate their correlation with clinical presentations and outcome. A total of 84 newly diagnosed CML patients were enrolled in the study. Patients were treated according to disease status. Bone marrow samples were obtained to perform cytogenetic and molecular studies. Clinical presentations, treatment courses, and survival were reviewed retrospectively. Among 84 patients, 72 had chronic phase and 12 had accelerated phase CML. Cytogenetic study showed 69 (82.1% with the classic Ph chromosome, 6 (7.2% with a variant Ph chromosome, and 9 (10.7% with additional chromosome abnormalities. Fifty-four (64.3% cases harbored b3a2 transcripts, 29 (34.5% had b2a2 transcript, and 1 had e19a2 transcript. There was no difference in clinical presentations between different cytogenetic and molecular groups; however, additional chromosome abnormalities were significantly associated with the accelerated phase. Imatinib therapy was an effective treatment, as measured by cytogenetic response, when administered as first- and second-line therapy in chronic phase patients. Survival analysis showed that old age, additional chromosome abnormalities, high Sokal score, and no cytogenetic response in second-line therapy had a significant poor impact (p<0.05. In conclusion, we presented the cytogenetic and molecular pattern of CML patients and demonstrated that the additional chromosome abnormality was associated with poor outcome.

  4. Thermal 18F atom addition to olefins

    International Nuclear Information System (INIS)

    Rogers, P.J.M.

    1986-01-01

    The addition of thermal 18 F atoms to olefins was investigated using various substrate molecules. The 18 F atoms were produced by the 19 F(n,2n) 18 F nuclear reaction with >10 5 eV of energy which is removed by multiple collisions with SF 6 molecules before reaction occurs with an olefin. By varying the SF 6 /substrate mole ratio it was demonstrated that the fraction of non-thermal reactions is dependent upon the frequency of non-reactive energy reducing collisions with SF 6 . The rate constants for addition and abstraction reactions with propene, cis-1-chloropropene and trans-1-chloropropene were determined. The substitution of a C1 atom for the olefinic H atom in the C 1 position does not affect the rate of 18 F bond formation but it changes the orientation of attack. The 18 F atom prefers the terminal carbon-in propene and propene-d 6 by a factor of 1.35 while the preference is less than 0.5 for the terminal carbon in cis-1-chloropropene and trans-1-chloropropene. The addition of 18 F atoms to olefins creates vibrationally excited fluoroalkyl radicals which can either decompose or stabilize by collision with another molecule. The rate constants for decomposition of excited CH 3 CHCHC1F radicals formed by 18 F addition to cis-1-chloropropene and trans-1-chloropropene are competitive with C 1 -C 2 bond rotation. The 18 F atoms add to the parent molecule with retention of geometry and a memory of the geometry persists as demonstrated by the cis-1-fluoropropene/trans-1-fluoropropene decomposition product ratio

  5. Generalized Additive Models for Nowcasting Cloud Shading

    Czech Academy of Sciences Publication Activity Database

    Brabec, Marek; Paulescu, M.; Badescu, V.

    2014-01-01

    Roč. 101, March (2014), s. 272-282 ISSN 0038-092X R&D Projects: GA MŠk LD12009 Grant - others:European Cooperation in Science and Technology(XE) COST ES1002 Institutional support: RVO:67985807 Keywords : sunshine number * nowcasting * generalized additive model * Markov chain Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 3.469, year: 2014

  6. Conferences on Combinatorial and Additive Number Theory

    CERN Document Server

    2014-01-01

    This proceedings volume is based on papers presented at the Workshops on Combinatorial and Additive Number Theory (CANT), which were held at the Graduate Center of the City University of New York in 2011 and 2012. The goal of the workshops is to survey recent progress in combinatorial number theory and related parts of mathematics. The workshop attracts researchers and students who discuss the state-of-the-art, open problems, and future challenges in number theory.

  7. Ionic liquids as lubricant additives: A review

    International Nuclear Information System (INIS)

    Zhou, Yan; Qu, Jun

    2016-01-01

    In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication with an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.

  8. Additive Manufacturing of Biomaterials, Tissues, and Organs.

    Science.gov (United States)

    Zadpoor, Amir A; Malda, Jos

    2017-01-01

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further development of patient-specific healthcare solutions. Customization of many healthcare products and services, such as implants, drug delivery devices, medical instruments, prosthetics, and in vitro models, would have been extremely challenging-if not impossible-without AM technologies. The current special issue of the Annals of Biomedical Engineering presents the latest trends in application of AM techniques to healthcare-related areas of research. As a prelude to this special issue, we review here the most important areas of biomedical research and clinical practice that have benefited from recent developments in additive manufacturing techniques. This editorial, therefore, aims to sketch the research landscape within which the other contributions of the special issue can be better understood and positioned. In what follows, we briefly review the application of additive manufacturing techniques in studies addressing biomaterials, (re)generation of tissues and organs, disease models, drug delivery systems, implants, medical instruments, prosthetics, orthotics, and AM objects used for medical visualization and communication.

  9. Laser Additive Manufacturing of Magnetic Materials

    Science.gov (United States)

    Mikler, C. V.; Chaudhary, V.; Borkar, T.; Soni, V.; Jaeger, D.; Chen, X.; Contieri, R.; Ramanujan, R. V.; Banerjee, R.

    2017-03-01

    While laser additive manufacturing is becoming increasingly important in the context of next-generation manufacturing technologies, most current research efforts focus on optimizing process parameters for the processing of mature alloys for structural applications (primarily stainless steels, titanium base, and nickel base alloys) from pre-alloyed powder feedstocks to achieve properties superior to conventionally processed counterparts. However, laser additive manufacturing or processing can also be applied to functional materials. This article focuses on the use of directed energy deposition-based additive manufacturing technologies, such as the laser engineered net shaping (LENS™) process, to deposit magnetic alloys. Three case studies are presented: Fe-30 at.%Ni, permalloys of the type Ni-Fe-V and Ni-Fe-Mo, and Fe-Si-B-Cu-Nb (derived from Finemet) alloys. All these alloys have been processed from a blend of elemental powders used as the feedstock, and their resultant microstructures, phase formation, and magnetic properties are discussed in this paper. Although these alloys were produced from a blend of elemental powders, they exhibited relatively uniform microstructures and comparable magnetic properties to those of their conventionally processed counterparts.

  10. Microbial analyses of cement and grouting additives

    International Nuclear Information System (INIS)

    Hallbeck, L.; Jaegevall, S.; Paeaejaervi, A.; Rabe, L.; Edlund, J.; Eriksson, S.

    2012-01-01

    During sampling in the ONKALO tunnel in 2006, heavy growth of a slimy material was observed in connection with grouting. It was suggested to be microbial growth on organic additives leaching from the grout. Two sampling campaigns resulted in the isolation of several aerobic bacterial strains. Some of these strains were used in biodegradation studies of three solid cement powders, eight liquid grout additives, and six plastic drainage materials. Degradation was also studied using ONKALO groundwaters as inoculums. The isolated strains were most closely related to hydrocarbon-degrading microorganisms. The biodegradation of seven of the products was tested using microorganisms isolated from the ONKALO slime in 2006; none of these strains could degrade the tested products. When ONKALO drillhole groundwaters were used as inoculums in the degradation studies, it was demonstrated that Structuro 111X, Mighty 150, and Super-Parmix supported growth of the groundwater microorganisms. Structuro 111X is a polycarboxylate condensate while Mighty 150 and Super-Parmix are condensates with formaldehyde and naphthalene. Some of the isolated microorganisms belonged to the genus Pseudomonas, many strains of which can degrade organic molecules. None of the plastic drainage materials supported growth during the degradation studies. Microorganisms were present in two of the liquid products when delivered, GroutAid and Super-Parmix. The potential of the organic compounds in grout additives to be degraded by microorganisms, increasing the risk of biofilm formation and complexing compound production, must be considered. Microbial growth will also increase the possibility of hydrogen sulphide formation. (orig.)

  11. Culture and neuroscience: additive or synergistic?

    Science.gov (United States)

    Dapretto, Mirella; Iacoboni, Marco

    2010-01-01

    The investigation of cultural phenomena using neuroscientific methods—cultural neuroscience (CN)—is receiving increasing attention. Yet it is unclear whether the integration of cultural study and neuroscience is merely additive, providing additional evidence of neural plasticity in the human brain, or truly synergistic, yielding discoveries that neither discipline could have achieved alone. We discuss how the parent fields to CN: cross-cultural psychology, psychological anthropology and cognitive neuroscience inform the investigation of the role of cultural experience in shaping the brain. Drawing on well-established methodologies from cross-cultural psychology and cognitive neuroscience, we outline a set of guidelines for CN, evaluate 17 CN studies in terms of these guidelines, and provide a summary table of our results. We conclude that the combination of culture and neuroscience is both additive and synergistic; while some CN methodologies and findings will represent the direct union of information from parent fields, CN studies employing the methodological rigor required by this logistically challenging new field have the potential to transform existing methodologies and produce unique findings. PMID:20083533

  12. Managing water addition to a degraded core

    International Nuclear Information System (INIS)

    Kuan, P.; Hanson, D.J.; Odar, F.

    1992-01-01

    In this paper the authors present information that can be used in severe accident management by providing an improved understanding of the effects of water addition to a degraded core. This improved understanding is developed using a diagram showing a sequence of core damage states. Whenever possible, a temperature and a time after accident initiation are estimated for each damage state in the sequence diagram. This diagram can be used to anticipate the evolution of events during an accident. Possible responses of plant instruments are described to identify these damage states and the effects of water addition. The rate and amount of water addition needed (a) to remove energy from the core, (b) to stabilize the core or (c) to not adversely affect the damage progression, are estimated. Analysis of the capability to remove energy from large cohesive and particulate debris beds indicates that these beds may not be stabilized in the core region and they may partially relocate to the lower plenum of the reactor vessel

  13. Molecular characterization of Cryptosporidium spp. from fecal samples of birds kept in captivity in Brazil.

    Science.gov (United States)

    Nakamura, Alex Akira; Simões, Daniel Castendo; Antunes, Rômulo Godik; da Silva, Deuvânia Carvalho; Meireles, Marcelo Vasconcelos

    2009-12-03

    The aim of this study was to determine the prevalence of Cryptosporidium species and genotypes in birds kept in captivity in Brazil. A total of 966 samples from 18 families of birds was collected and stored in 5% potassium dichromate solution at 4 degrees C until processing. Oocysts were purified in Sheather sugar solution following extraction of genomic DNA. Molecular analyses were performed using nested-PCR for amplification of fragments of the 18S subunit of rRNA gene and of the actin gene. Amplification of Cryptosporidium DNA fragments was obtained in 47 (4.86%) samples. Sequencing of amplified fragments and phylogenetic analyses allowed the identification of Cryptosporidium baileyi in a black vulture (Coragyps atratus), a domestic chicken (Gallus gallus domesticus) and a saffron finch (Sicalis flaveola); Cryptosporidium galli in canaries (Serinus canaria), a cockatiel (Nymphicus hollandicus) and lesser seed-finches (Oryzoborus angolensis); Cryptosporidium meleagridis in a domestic chicken (G. g. domesticus); Cryptosporidium parvum in a cockatiel (N. hollandicus); Cryptosporidium avian genotype I in a canary (S. canaria) and an Indian peafowl (Pavo cristatus); Cryptosporidium avian genotype II in ostriches (Struthio camelus) and Cryptosporidium avian genotype III in a cockatiel (N. hollandicus) and a peach-faced lovebird (Agapornis roseicolis).

  14. How many food additives are rodent carcinogens?

    Science.gov (United States)

    Johnson, F M

    2002-01-01

    One generally assumes that chemical agents added to foods are reasonably free of risks to human health, and practically everyone consumes some additives in his or her food daily throughout life. In the United States, the 1958 Food Additives Amendment to the Federal Food, Drug and Cosmetic Act of 1938 requires food manufacturers to demonstrate the safety of food additives to the Food and Drug Administration (FDA). The Amendment contains a provision that prohibits approval of an additive if it is found to cause cancer in humans or animals. In the present study, data from the National Toxicology Program rodent bioassay (NTPRB) were used to identify a sample of approximately 50 rodent-tested additives and other chemicals added to food that had been evaluated independently of the FDA/food industry. Surprisingly, the sample shows more than 40% of these food chemicals to be carcinogenic in one or more rodent groups. If this percentage is extrapolated to all substances added to food in the United States, it would imply that more than 1000 of such substances are potential rodent carcinogens. The NTP and FDA test guidelines use similar, though not necessarily identical, rodent test procedures, including near lifetime exposures to the maximum tolerated dose. The FDA specifies that test chemicals should be administered by the oral route. However, the oral route includes three methods of delivering chemicals, that is, mixed in the food or water or delivered by stomach tube (gavage). The NTP data show only 1 of 18 food chemicals mixed in the food are rodent carcinogens, but 16 of 23 gavage-administered food chemicals are carcinogenic to rodents. The distribution suggests that among orally delivered chemicals, those administered in the feed will more likely prove to be noncarcinogens than chemicals given by gavage. The rodent data also reveal that effects may vary according to dose and genotype, as well as by route of administration, to further complicate extrapolation to humans

  15. Mechanical properties of additively manufactured octagonal honeycombs

    Energy Technology Data Exchange (ETDEWEB)

    Hedayati, R., E-mail: rezahedayati@gmail.com [Department of Mechanical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave, Tehran (Iran, Islamic Republic of); Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft (Netherlands); Sadighi, M.; Mohammadi-Aghdam, M. [Department of Mechanical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave, Tehran (Iran, Islamic Republic of); Zadpoor, A.A. [Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft (Netherlands)

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs. - Highlights: • The octagonal

  16. Influence of Additives on Reinforced Concrete Durability

    Directory of Open Access Journals (Sweden)

    Neverkovica Darja

    2014-12-01

    Full Text Available The article presents the results of the research on carbonation and chloride induced corrosion mechanisms in reinforced concrete structures, based on three commercially available concrete admixtures: Xypex Admix C-1000, Penetron Admix and Elkem Microsilica. Carbonation takes place due to carbon dioxide diffusion, which in the required amount is present in the air. Chlorides penetrate concrete in case of the use of deicing salt or structure exploitation in marine atmosphere. Based on the implemented research, Elkem Microsilica is the recommended additive for the use in aggressive environmental conditions. Use of Xypex Admix C-1000 and Penetron Admix have only average resistance to the aggressive environmental impact.

  17. Enhanced additive manufacturing with a reciprocating platen

    Science.gov (United States)

    Lind, Randall F.; Blue, Craig A.; Love, Lonnie J.; Post, Brian K.; Lloyd, Peter D.

    2018-02-06

    An additive manufacturing extrusion head that includes a heated nozzle for accepting a feedstock and extruding the feedstock onto a substrate at a deposition plane, the nozzle having a longitudinal extrusion axis. A reciprocating platen surrounds the nozzle, the platen operable to reciprocate along the extrusion axis at or above the deposition plane as the nozzle extrudes feedstock onto the substrate; and wherein the platen flattens the extruded feedstock such that it does not protrude above the deposition plane as the extrusion head traverses over the substrate.

  18. Dust-Firing of Straw and Additives

    DEFF Research Database (Denmark)

    Wu, Hao; Glarborg, Peter; Frandsen, Flemming

    2011-01-01

    In the present work, the ash chemistry and deposition behavior during straw dust-firing were studied by performing experiments in an entrained flow reactor. The effect of using spent bleaching earth (SBE) as an additive in straw combustion was also investigated by comparing with kaolinite. During...... dust-firing of straw, the large (>∼2.5 μm) fly ash particles generated were primarily molten or partially molten spherical particles rich in K, Si, and Ca, supplemented by Si-rich flake-shaped particles. The smaller fly ash particles (...

  19. Mechanism and kinetics of addition polymerizations

    CERN Document Server

    Kucera, M

    1991-01-01

    This volume presents an up-to-date survey of knowledge concerning addition type polymerizations. It contains nine chapters, each of which covers a particular basic term. Whenever necessary, the phenomena are discussed from the viewpoint of both stationary and non-stationary state of radical, ionic (i.e. anionic and cationic) and coordination polymerization. Special attention has been paid to the propagation process. It provides not only a general overview but also information on important special cases (theoretical conditions of propagation, influence of external factors, controlled propagatio

  20. Metal-deactivating additives for liquid fuels

    Energy Technology Data Exchange (ETDEWEB)

    Boneva, M.I. [Institute of Organic Chemistry, Sofia (Bulgaria); Ivanov, S.K.; Kalitchin, Z.D. [SciBulCom, Ltd., Sofia (Bulgaria); Tanielyan, S.K. [Seton Hall Univ., South Orange, NJ (United States); Terebenina, A.; Todorova, O.I. [Institute of Inorganic Chemistry, Sofia (Bulgaria)

    1995-05-01

    The metal-deactivating and the antioxidant properties of 1-phenyl-3-methylpyrazolone-5 derivatives have been investigated both in the model reaction of low temperature oxidation of ethylbenzene and in gasoline oxidation. The study of the ability of these derivatives to reduce the catalytic effect of copper naphthenate demonstrates that they are promising as metal deactivating additives for light fuels. Some of the pyrazolone compounds appear to be of special interest for the long-term storage of liquid fuels due to their action as multifunctional inhibitors.

  1. Additive Manufacturing of Hierarchical Porous Structures

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division. Polymers and Coatings

    2016-08-30

    Additive manufacturing has become a tool of choice for the development of customizable components. Developments in this technology have led to a powerful array of printers that t serve a variety of needs. However, resin development plays a crucial role in leading the technology forward. This paper addresses the development and application of printing hierarchical porous structures. Beginning with the development of a porous scaffold, which can be functionalized with a variety of materials, and concluding with customized resins for metal, ceramic, and carbon structures.

  2. Additive measures of travel time variability

    DEFF Research Database (Denmark)

    Engelson, Leonid; Fosgerau, Mogens

    2011-01-01

    This paper derives a measure of travel time variability for travellers equipped with scheduling preferences defined in terms of time-varying utility rates, and who choose departure time optimally. The corresponding value of travel time variability is a constant that depends only on preference...... parameters. The measure is unique in being additive with respect to independent parts of a trip. It has the variance of travel time as a special case. Extension is provided to the case of travellers who use a scheduled service with fixed headway....

  3. Additive Cellular Automata and Volume Growth

    Directory of Open Access Journals (Sweden)

    Thomas B. Ward

    2000-08-01

    Full Text Available Abstract: A class of dynamical systems associated to rings of S-integers in rational function fields is described. General results about these systems give a rather complete description of the well-known dynamics in one-dimensional additive cellular automata with prime alphabet, including simple formulæ for the topological entropy and the number of periodic configurations. For these systems the periodic points are uniformly distributed along some subsequence with respect to the maximal measure, and in particular are dense. Periodic points may be constructed arbitrarily close to a given configuration, and rationality of the dynamical zeta function is characterized. Throughout the emphasis is to place this particular family of cellular automata into the wider context of S-integer dynamical systems, and to show how the arithmetic of rational function fields determines their behaviour. Using a covering space the dynamics of additive cellular automata are related to a form of hyperbolicity in completions of rational function fields. This expresses the topological entropy of the automata directly in terms of volume growth in the covering space.

  4. Surface texture measurement for additive manufacturing

    Science.gov (United States)

    Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

    2015-06-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

  5. Additive manufacturing of tools for lapping glass

    Science.gov (United States)

    Williams, Wesley B.

    2013-09-01

    Additive manufacturing technologies have the ability to directly produce parts with complex geometries without the need for secondary processes, tooling or fixtures. This ability was used to produce concave lapping tools with a VFlash 3D printer from 3D Systems. The lapping tools were first designed in Creo Parametric with a defined constant radius and radial groove pattern. The models were converted to stereolithography files which the VFlash used in building the parts, layer by layer, from a UV curable resin. The tools were rotated at 60 rpm and used with 120 grit and 220 grit silicon carbide lapping paste to lap 0.750" diameter fused silica workpieces. The samples developed a matte appearance on the lapped surface that started as a ring at the edge of the workpiece and expanded to the center. This indicated that as material was removed, the workpiece radius was beginning to match the tool radius. The workpieces were then cleaned and lapped on a second tool (with equivalent geometry) using a 3000 grit corundum aluminum oxide lapping paste, until a near specular surface was achieved. By using lapping tools that have been additively manufactured, fused silica workpieces can be lapped to approach a specified convex geometry. This approach may enable more rapid lapping of near net shape workpieces that minimize the material removal required by subsequent polishing. This research may also enable development of new lapping tool geometry and groove patterns for improved loose abrasive finishing.

  6. Leaching of plastic additives to marine organisms

    International Nuclear Information System (INIS)

    Koelmans, Albert A.; Besseling, Ellen; Foekema, Edwin M.

    2014-01-01

    It is often assumed that ingestion of microplastics by aquatic species leads to increased exposure to plastic additives. However, experimental data or model based evidence is lacking. Here we assess the potential of leaching of nonylphenol (NP) and bisphenol A (BPA) in the intestinal tracts of Arenicola marina (lugworm) and Gadus morhua (North Sea cod). We use a biodynamic model that allows calculations of the relative contribution of plastic ingestion to total exposure of aquatic species to chemicals residing in the ingested plastic. Uncertainty in the most crucial parameters is accounted for by probabilistic modeling. Our conservative analysis shows that plastic ingestion by the lugworm yields NP and BPA concentrations that stay below the lower ends of global NP and BPA concentration ranges, and therefore are not likely to constitute a relevant exposure pathway. For cod, plastic ingestion appears to be a negligible pathway for exposure to NP and BPA. - Highlights: • Uptake of plastic additives after plastic ingestion was modeled for worms and fish. • This was done for bisphenol A and nonylphenol. • Uncertainty was accounted for by Monte Carlo simulations. • It appeared that exposure by plastic ingestion was negligible for fish. • Plastic ingestion may occasionally be relevant for marine worms. - Leaching of nonylphenol and bisphenol A from ingested microplastic may be relevant for the lugworm, but is irrelevant for fish like cod

  7. Surface texture measurement for additive manufacturing

    International Nuclear Information System (INIS)

    Triantaphyllou, Andrew; Tomita, Ben; Milne, Katherine A; Giusca, Claudiu L; Macaulay, Gavin D; Roerig, Felix; Hoebel, Matthias; Leach, Richard K

    2015-01-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting. (paper)

  8. Surface-specific additive manufacturing test artefacts

    Science.gov (United States)

    Townsend, Andrew; Racasan, Radu; Blunt, Liam

    2018-06-01

    Many test artefact designs have been proposed for use with additive manufacturing (AM) systems. These test artefacts have primarily been designed for the evaluation of AM form and dimensional performance. A series of surface-specific measurement test artefacts designed for use in the verification of AM manufacturing processes are proposed here. Surface-specific test artefacts can be made more compact because they do not require the large dimensions needed for accurate dimensional and form measurements. The series of three test artefacts are designed to provide comprehensive information pertaining to the manufactured surface. Measurement possibilities include deviation analysis, surface texture parameter data generation, sub-surface analysis, layer step analysis and build resolution comparison. The test artefacts are designed to provide easy access for measurement using conventional surface measurement techniques, for example, focus variation microscopy, stylus profilometry, confocal microscopy and scanning electron microscopy. Additionally, the test artefacts may be simply visually inspected as a comparative tool, giving a fast indication of process variation between builds. The three test artefacts are small enough to be included in every build and include built-in manufacturing traceability information, making them a convenient physical record of the build.

  9. Emerging technologies in arthroplasty: additive manufacturing.

    Science.gov (United States)

    Banerjee, Samik; Kulesha, Gene; Kester, Mark; Mont, Michael A

    2014-06-01

    Additive manufacturing is an industrial technology whereby three-dimensional visual computer models are fabricated into physical components by selectively curing, depositing, or consolidating various materials in consecutive layers. Although initially developed for production of simulated models, the technology has undergone vast improvements and is currently increasingly being used for the production of end-use components in various aerospace, automotive, and biomedical specialties. The ability of this technology to be used for the manufacture of solid-mesh-foam monolithic and coated components of complex geometries previously considered unmanufacturable has attracted the attention of implant manufacturers, bioengineers, and orthopedic surgeons. Currently, there is a paucity of reports describing this fabrication method in the orthopedic literature. Therefore, we aimed to briefly describe this technology, some of the applications in other orthopedic subspecialties, its present use in hip and knee arthroplasty, and concerns with the present form of the technology. As there are few reports of clinical trials presently available, the true benefits of this technology can only be realized when studies evaluating the clinical and radiographic outcomes of cementless implants manufactured with additive manufacturing report durable fixation, less stress shielding, and better implant survivorship. Nevertheless, the authors believe that this technology holds great promise and may potentially change the conventional methods of casting, machining, and tooling for implant manufacturing in the future. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  10. Characterizations of additive manufactured porous titanium implants.

    Science.gov (United States)

    Basalah, Ahmad; Shanjani, Yaser; Esmaeili, Shahrzad; Toyserkani, Ehsan

    2012-10-01

    This article describes physical, chemical, and mechanical characterizations of porous titanium implants made by an additive manufacturing method to gain insight into the correlation of process parameters and final physical properties of implants used in orthopedics. For the manufacturing chain, the powder metallurgy technology was combined with the additive manufacturing to fabricate the porous structure from the pure tanium powder. A 3D printing machine was employed in this study to produce porous bar samples. A number of physical parameters such as titanium powder size, polyvinyl alcohol (PVA) amount, sintering temperature and time were investigated to control the mechanical properties and porosity of the structures. The produced samples were characterized through porosity and shrinkage measurements, mechanical compression test and scanning electron microscopy (SEM). The results showed a level of porosity in the samples in the range of 31-43%, which is within the range of the porosity of the cancelluous bone and approaches the range of the porosity of the cortical bone. The results of the mechanical test showed that the compressive strength is in the wide range of 56-509 MPa implying the effect of the process parameters on the mechanical strengths. This technique of manufacturing of Ti porous structures demonstrated a low level of shrinkage with the shrinkage percentage ranging from 1.5 to 5%. Copyright © 2012 Wiley Periodicals, Inc.

  11. Additive Manufacturing of Composites and Complex Materials

    Science.gov (United States)

    Spowart, Jonathan E.; Gupta, Nikhil; Lehmhus, Dirk

    2018-03-01

    Advanced composite materials form an important class of high-performance industrial materials used in weight-sensitive applications such as aerospace structures, automotive structures and sports equipment. In many of these applications, parts are made in small production runs, are highly customized and involve long process development times. Developments in additive manufacturing (AM) methods have helped in overcoming many of these limitations. The special topic of Additive Manufacturing of Composites and Complex Materials captures the state of the art in this area by collecting nine papers that present much novel advancement in this field. The studies under this topic show advancement in the area of AM of carbon fiber and graphene-reinforced composites with high thermal and electrical conductivities, development of new hollow glass particle-filled syntactic foam filaments for printing lightweight structures and integration of sensors or actuators during AM of metallic parts. Some of the studies are focused on process optimization or modification to increase the manufacturing speed or tuning manufacturing techniques to enable AM of new materials.

  12. Preparation of additional supplies of 244Pu

    International Nuclear Information System (INIS)

    Bigelow, J.E.; Newman, E.; Alexander, C.W.

    1985-01-01

    In the mid-1970s, gram quantities of the man-made isotope 244 Pu were produced in high purity for basic research as a by-product of a program to prepare gram quantities of 252 Cf. Because 244 Pu is not produced in appreciable quantities in standard power reactor fuel, this nuclide has become extremely useful in the application of isotope dilution mass spectrometry (IDMS), a high-precision analytical technique, to problems of plutonium accountability in support of international safeguards agreements. Although only a small amount (a fraction of a microgram) is needed for each analysis, the present supply of certified nuclear reference standard SRM-996 is expected to last only an additional 3 to 5 years. Three options for producing additional supplies of this rare and valuable material were examined. The options encompassed the production of from 1 to 8.5 g during time spans of from 3 to 10 years. Unit costs ranged from $2300 to $7200 per mg of plutonium of >97% 244 Pu. While the paper concludes that the short-term option can be pursued along with further study of the longer-term options, this should not be regarded as an offer or a commitment on the part of the US Department of Energy (USDOE) to furnish the described material

  13. Variant Carvajal syndrome with additional dental anomalies.

    Science.gov (United States)

    Barber, Sophy; Day, Peter; Judge, Mary; Toole, Edell O'; Fayle, Stephen

    2012-09-01

    This paper aims to review the case of a girl who presented with a number of dental anomalies, in addition to unusual skin, nail and hair conditions. Tragically an undiagnosed cardiomyopathy caused unexpected sudden death. The case is discussed with reference to a number of dermatological and oral conditions which were considered as possible diagnoses. AW had been under long term dental care for prepubertal periodontitis, premature root resorption of primary teeth, soft tissue and dental anomalies, and angular cheilitis. Separately she had also been seen by several dermatologists with respect to palmar plantar keratosis, striae keratoderma, wiry hair and abnormal finger nails. Tragically the patient suffered a sudden unexpected death and the subsequent post mortem identified an undiagnosed dilated cardiomyopathy. The most likely diagnosis is that this case is a variant of Carvajal Syndrome with additional dental anomalies. To date we have been unable to identify mutations in the desoplakin gene. We aim to emphasise the importance of recognising these dental and dermatological signs when they present together as a potential risk factor for cardiac abnormalities. © 2012 The Authors. International Journal of Paediatric Dentistry © 2012 BSPD, IAPD and Blackwell Publishing Ltd.

  14. Sending more process data without additional cables

    International Nuclear Information System (INIS)

    Licht, H.; Roiha, R.; Rodych, M.

    1997-01-01

    The as-built data transmission capability in CANDU plants is fully employed. Long delays and high cost make it often not feasible to retrofit plant equipment with additional sensors and bring the data to the office. One of the reasons is the unavoidable addition of data transmission cables. This presentation describes the results of work performed in 1996/97 to network sensors using existing plant infrastructure. To provide an alternative solution, a general purpose data transmission system is being developed. It sends data over existing plant infrastructure such as power wiring and the telephone system. Its components are based on PC technology packaged in a 'black box', using special hardware and software to appear to the user as a very simple, low cost, device. Its drawback is its rather limited transmission speed. This design is in marked contrast to the complexity of present commercial data transmission systems. A point-to-point system has been demonstrated. A networked system is under development. (author)

  15. Value addition - a marketing strategy for MCL

    Energy Technology Data Exchange (ETDEWEB)

    Sagar, C.K.; Mishra, P.K.; Baranwal, P.K. [Central Mine Planning and Design Institute, Ranchi (India)

    2002-07-01

    The energy sector will remain dependent on coal because of depletion of oil reserves. With deterioration of power grade coal, the emission of greenhouse gas is going to increase thereby stressing the need of using prepared low ash coal for protection of global environment. Further, recent stipulation of MOEF imposing restriction on use of high ash coal at distant power houses and those at sensitive localities and critically polluted areas have made the aspect of marketing of coal more challenging. This has necessitated a long-term strategy for improving the quality of coal in light of national environment policy. This is more relevant in the present scenario of open market, where we need to market our coal rather simply supplying r.o.m. coal to the linked users. Mahanadi Coalfields, Limited (MCL), the youngest subsidiary of Coal India Limited bestowed with a huge reserve of inferior grade and mainly linked to power sector, is taken as a sample case study. To fulfil the demand of coal with due regard to the national environmental policy, there is need of value addition as strategy of marketing for power coal of MCL. Value addition of coal can be achieved by two distinct different ways i.e. beneficiating high ash coal at pit head or blending high ash coal with low ash coal which is a less preferred option due to non-availability of low ash coal in MCL. 7 refs., 7 tabs.

  16. Preparation of additional supplies of 244Pu

    International Nuclear Information System (INIS)

    Bigelow, J.E.; Newman, E.; Alexander, C.W.

    1985-01-01

    In the mid-1970s, gram quantities of the man-made isotope 244 Pu were produced in high purity for basic research as a by-product of a program to prepare gram quantities of 252 Cf. Because 244 Pu is not produced in appreciable quantities in standard power reactor fuel, this nuclide has become extremely useful in the application of isotope dilution mass spectrometry (IDMS), a high-precision analytical technique, to problems of plutonium accountability in support of international safeguards agreements. Although only a small amount (a fraction of a microgram) is needed for each analysis, the present supply of certified nuclear reference standard SRM-996 is expected to last only an additional 3 to 5 years. Three options for producing additional supplies of this rare and valuable material were examined. The options encompassed the production of from 1 to 8.5 g during time spans of from 3 to 10 years. Unit costs ranged from $2300 to $7200 per mg of plutonium of >97% 244 Pu. While the paper concludes that the short-term option can be pursued along with further study of the longer-term options, this should not be regarded as an offer or a commitment on the part of the U.S. Department of Energy (USDOE) to furnish the described material. (author)

  17. Additives as corrosion inhibitors in reinforced concrete

    International Nuclear Information System (INIS)

    Venegas, Ricardo; Vera, Rosa; Carvajal, Ana Maria; Villarroel, Maria; Vera, Enrique; Ortiz, Cesar

    2008-01-01

    This work studies the behavior of two additives as inhibitors of corrosion in reinforced concrete. The presence of Microsilica, a physical inhibitor, in the mixture decreases pore size in structures and improves compression. Calcium Nitrite, a chemical inhibitor, is an oxidizing agent and allows a more homogenous film to form over the steel that becomes more resistant to attacks from aggressive ions like anion chloride and others. Three pairs of concrete test pieces were used without additives and with additives with a/c ration of 0.55. The samples were exposed to an accelerated attack of chlorides, submerging them in a 4.27 M solution of NaCl for 24 hours and then drying them at room temperature for another 24 hours, completing a cycle every 48 hours. The tests were carried out at 1 cycle and 5 cycles of partial moistening and drying. The steel corrosion was evaluated with corrosion potential measurements. Conductivity, pH, chlorides and sulfate profiles were defined depending on the depth of the concrete. The composition of the corrosion products was determined using X-ray diffraction and the morphology of the film by scanning electron microscopy. The results show that for 1 test cycle, the corrosion potential of the steel in the sample with calcium nitrite was -54mV, which was a higher value than that measured in the sample with microsilica (-217.3mV) and without an additive (-159.1mV), corroborating its inhibitory power. The content of the free chlorides in the sample with micros ice allows greater capillary suction by adding high amounts of chloride to the structure (2.6% on the outside up to 2.20% near the steel); while the test pieces with calcium nitrite and without an additive had concentrations lower than 2% in all the evaluated points. After five cycles of exposing the samples to the saline solution the behavior is inverted. The measures of conductivity agreed with the previous results. Meanwhile, the pH of the solutions obtained from the powder from the

  18. Addition Table of Colours: Additive and Subtractive Mixtures Described Using a Single Reasoning Model

    Science.gov (United States)

    Mota, A. R.; Lopes dos Santos, J. M. B.

    2014-01-01

    Students' misconceptions concerning colour phenomena and the apparent complexity of the underlying concepts--due to the different domains of knowledge involved--make its teaching very difficult. We have developed and tested a teaching device, the addition table of colours (ATC), that encompasses additive and subtractive mixtures in a single…

  19. 76 FR 16285 - Food Additives Permitted for Direct Addition to Food for Human Consumption; Bacteriophage...

    Science.gov (United States)

    2011-03-23

    ... mammalian cells. (See discussion at 71 FR 47729 at 47730). As such, traditional animal testing of the... 51758 at 51759, August 25, 2000). Suitability relates to the effectiveness of the ingredient in... additive be shown to be safe prior to marketing. Under Sec. 170.3(i), a food additive is ``safe'' if...

  20. Additive phosphaturic action of parathyrin and calcitonin

    International Nuclear Information System (INIS)

    Oberleitner, H.; Lang, F.; Greger, P.; Sporer, H.; Deetjen, P.

    1980-01-01

    Parathyrin and calcitonin exert their effects on phosphate metabolism by influencing the functions of at least three organ systems, i.e. bone, gut and kidneys. To study the renal effects of these hormones under exclusion of systemic effects microinfusion studies were performed in anesthetised rats. After thyroparathyroidectomy radioactively labelled phosphate containing solutions were microinfused into single proximal convoluted tubules. The tracer recovery in the urine allowed calculation of phosphate reabsorption in the nephron segments beyond the micropuncture site. After a control period of 6 minutes the hormones were superfused to the nephron surface and tracer recovery measured during the following 36 minutes. Within few minutes both, parathyrin and calcitonin, clearly reduced phosphate reabsorption. Infusions of supramaximal doses of either hormone abolished the local action of this hormone but did not influence the effect of the other. Thus the phosphaturic actions of parathyrin and calcitonin are additive, indicating that the hormones involve different mechanisms and/or nephron sites. (author)

  1. Object attributes combine additively in visual search.

    Science.gov (United States)

    Pramod, R T; Arun, S P

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in internal details, such as texture; (c) differences in emergent attributes, such as symmetry; and (d) differences in global properties, such as orientation or overall configuration of parts. Our results elucidate an enduring question in object vision by showing that the whole object is not a sum of its parts but a sum of its many attributes.

  2. Nonparametric additive regression for repeatedly measured data

    KAUST Repository

    Carroll, R. J.

    2009-05-20

    We develop an easily computed smooth backfitting algorithm for additive model fitting in repeated measures problems. Our methodology easily copes with various settings, such as when some covariates are the same over repeated response measurements. We allow for a working covariance matrix for the regression errors, showing that our method is most efficient when the correct covariance matrix is used. The component functions achieve the known asymptotic variance lower bound for the scalar argument case. Smooth backfitting also leads directly to design-independent biases in the local linear case. Simulations show our estimator has smaller variance than the usual kernel estimator. This is also illustrated by an example from nutritional epidemiology. © 2009 Biometrika Trust.

  3. Additive manufacturing techniques and their biomedical applications

    Directory of Open Access Journals (Sweden)

    Yujing Liu

    2017-12-01

    Full Text Available Additive manufacturing (AM, also known as three-dimensional (3D printing, is gaining increasing attention in medical fields, especially in dental and implant areas. Because AM technologies have many advantages in comparison with traditional technologies, such as the ability to manufacture patient-specific complex components, high material utilization, support of tissue growth, and a unique customized service for individual patients, AM is considered to have a large potential market in medical fields. This brief review presents the recent progress of 3D-printed biomedical materials for bone applications, mainly for metallic materials, including multifunctional alloys with high strength and low Young’s modulus, shape memory alloys, and their 3D fabrication by AM technologies. It describes the potential of 3D printing techniques in precision medicine and community health.

  4. Additive Feed Forward Control with Neural Networks

    DEFF Research Database (Denmark)

    Sørensen, O.

    1999-01-01

    This paper demonstrates a method to control a non-linear, multivariable, noisy process using trained neural networks. The basis for the method is a trained neural network controller acting as the inverse process model. A training method for obtaining such an inverse process model is applied....... A suitable 'shaped' (low-pass filtered) reference is used to overcome problems with excessive control action when using a controller acting as the inverse process model. The control concept is Additive Feed Forward Control, where the trained neural network controller, acting as the inverse process model......, is placed in a supplementary pure feed-forward path to an existing feedback controller. This concept benefits from the fact, that an existing, traditional designed, feedback controller can be retained without any modifications, and after training the connection of the neural network feed-forward controller...

  5. Additional investigations on the consequences of accidents

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Bayer, A.; Burkart, K.

    1982-01-01

    As a first step to improve the accident consequence model of the German Risk Study within the Phase B, additional investigations on special problems and questions were performed. In detail attention is given to the following topics: emergency protective actions in the vicinity of the site; latent cancer fatalities - allocated to the population living during the nuclear accident and to persons born afterwards, within and beyond a distance of 540 km from the site, caused by radiation doses below the dose limits of the German radiation protection regulations estimated assuming a nonlinear dose response function; risk assessments of nuclear power plants with lower capacities; loss of life expectancy after accidental radiation exposure. All results are presented separately for the 8 release categories of the German Risk Study. (orig.) [de

  6. Additive functionals and excursions of Kuznetsov processes

    Directory of Open Access Journals (Sweden)

    Hacène Boutabia

    2005-01-01

    semigroup of transition. In this paper, we give the excursion laws of (Xtt∈ℝ+ conditioned on the strict past and future without duality hypothesis. We study excursions of a general regenerative system and of a regenerative system consisting of the closure of the set of times the regular points of B are visited. In both cases, those conditioned excursion laws depend only on two points Xg− and Xd, where ]g,d[ is an excursion interval of the regenerative set M. We use the (FDt-predictable exit system to bring together the isolated points of M and its perfect part and replace the classical optional exit system. This has been a subject in literature before (e.g., Kaspi (1988 under the classical duality hypothesis. We define an “additive functional” for (Ytt∈ℝ with B, we generalize the laws cited before to (Ytt∈ℝ, and we express laws of pairs of excursions.

  7. Xenon plasma with caesium as additive

    International Nuclear Information System (INIS)

    Stojilkovic, S.M.; Novakovic, N.V.; Zivkovic, L.M.

    1986-01-01

    The concentration dependence of xenon plasma with cesium as additive in the temperature range of 2000 K to 20,000 K is analyzed. Plasma is considered as weakly nonideal in complete local thermodynamic equilibrium and the interaction between plasma and vessel walls is not taken into account. The values of some of the parameters for nonideality of plasma with 1% of cesium (γ=0.01010) and 10% of cesium (γ=0.11111) are computed, for an initial pressure in plasma of p 0 =13,000 Pa and initial temperature T 0 =1000 K. The ratio of electric conductivity of plasma computed by Lorentz's formula and electric conductivity computed by Spitzer's formula in the same temperature interval is also analyzed. (author) 5 figs., 2 tabs., 16 refs

  8. Xenon plasma with caesium as additive

    Energy Technology Data Exchange (ETDEWEB)

    Stojilkovic, S M; Novakovic, N V; Zivkovic, L M

    1986-01-01

    The concentration dependence of xenon plasma with cesium as additive in the temperature range of 2000 K to 20,000 K is analyzed. Plasma is considered as weakly nonideal in complete local thermodynamic equilibrium and the interaction between plasma and vessel walls is not taken into account. The values of some of the parameters for nonideality of plasma with 1% of cesium (..gamma..=0.01010) and 10% of cesium (..gamma..=0.11111) are computed, for an initial pressure in plasma of p/sub 0/=13,000 Pa and initial temperature T/sub 0/=1000 K. The ratio of electric conductivity of plasma computed by Lorentz's formula and electric conductivity computed by Spitzer's formula in the same temperature interval is also analyzed. (author) 5 figs., 2 tabs., 16 refs.

  9. Breastfeeding peer support: are there additional benefits?

    Science.gov (United States)

    Wade, Deborah; Haining, Shona; Day, Ann

    2009-12-01

    Anecdotal discussion among breastfeeding peer supporters and the infant-feeding co-ordinator suggested that breastfeeding peer support provided by breastfeeding peer supporters may offer benefits to breastfeeding women and their families other than increasing breastfeeding initiation and sustainability. The aim of this research was to determine whether there was evidence to support this. The research team used focus groups to obtain information from 16 local women who had received breastfeeding peer support from breastfeeding peer supporters. The key themes that emerged were--improved mental health, increased self-esteem or confidence, parenting skills, improved family diet, breastfeeding sustainability and poor hospital experience.The findings suggest that breastfeeding peer supporters supporting mothers to breastfeed, with the intention of increasing both breastfeeding rates and sustainability, may have additional benefits in several aspects of families' lives. Breastfeeding peer support may play an important role in helping to attain targets such as reducing obesity and postnatal depression.

  10. Additional Security Considerations for Grid Management

    Science.gov (United States)

    Eidson, Thomas M.

    2003-01-01

    The use of Grid computing environments is growing in popularity. A Grid computing environment is primarily a wide area network that encompasses multiple local area networks, where some of the local area networks are managed by different organizations. A Grid computing environment also includes common interfaces for distributed computing software so that the heterogeneous set of machines that make up the Grid can be used more easily. The other key feature of a Grid is that the distributed computing software includes appropriate security technology. The focus of most Grid software is on the security involved with application execution, file transfers, and other remote computing procedures. However, there are other important security issues related to the management of a Grid and the users who use that Grid. This note discusses these additional security issues and makes several suggestions as how they can be managed.

  11. Additive manufacturing for steels: a review

    Science.gov (United States)

    Zadi-Maad, A.; Rohib, R.; Irawan, A.

    2018-01-01

    Additive manufacturing (AM) of steels involves the layer by layer consolidation of powder or wire feedstock using a heating beam to form near net shape products. For the past decades, the AM technique reaches the maturation of both research grade and commercial production due to significant research work from academic, government and industrial research organization worldwide. AM process has been implemented to replace the conventional process of steel fabrication due to its potentially lower cost and flexibility manufacturing. This paper provides a review of previous research related to the AM methods followed by current challenges issues. The relationship between microstructure, mechanical properties, and process parameters will be discussed. Future trends and recommendation for further works are also provided.

  12. Additives for high-temperature liquid lubricants

    Science.gov (United States)

    Lawton, Emil A.; Yavrouian, Andre H.; Repar, John

    1988-01-01

    A preliminary research program was conducted to demonstrate a new concept for additives to liquid lubricants. It was demonstrated that suspensions of o-phthalonitrile and a substituted 1,2-maleonitrile in mineral oil and dilute solutions of o-phthalonitrile and tetrafluoro-o-phthalonitrile extended the lifetime of bearings under boundary lubricating conditions. The solutions exhibited coefficients of friction under high loads of 0.02-0.03. These results were consistent with the hypothesis that these compounds react with the hot metal surface to form a planar lubricating film by means of a metal or metal oxide template reaction. Also, the adherence was very strong due to the chelating action of the planar macrocycles postulated to form under the experimental conditions.

  13. Cerus process modified with glass addition (Vitrocerus)

    International Nuclear Information System (INIS)

    Arboleda, P.A.; Rodriguez, D.S.; Prado, M.O.

    2009-01-01

    A processing method for spent fuels type Mtr from research reactors has developed in Nuclear Materials Division of Bariloche Atomic Center, this process involved the creation of ceramic matrix containing fuel and natural uranium in an isotopic solution, this project has named CERUS (Spanish acronym of 'Ceramización de Elementos Radioactivos en Uranio Sinterizado': Ceramming of radioactive elements with sintered uranium ). This process works with reduced volumes than a conventional vitrification, however because of some issues on the material resistance; we propose the addition of small amounts of glass with the idea to enhance the lixiviation properties of the final material. In this process is not considered the reprocessing possibility of the spent fuel. (author)

  14. Additive Manufacturing of Wind Turbine Molds

    Energy Technology Data Exchange (ETDEWEB)

    Post, Brian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Richardson, Bradley [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lloyd, Peter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nolet, Stephen [TPI Composites, Scottsdale, AZ (United States); Hannan, James [TPI Composites, Scottsdale, AZ (United States)

    2017-07-01

    The objective of this project was to explore the utility of Big Area Additive Manufacturing (BAAM) for low cost manufacturing of wind turbine molds. Engineers at Oak Ridge National Laboratory (ORNL) and TPI Composites (TPI) collaborated to design and manufacture a printed mold that can be used for resin infusion of wind turbine components. Specific focus was on required material properties (operating temperatures and pressures, coefficient of thermal expansion (CTE), thermal conductivity), surface finish (accuracy and coatings) and system integration (integrated vacuum ports, and heating element). The project began with a simple proof of principle components, targeting surface coatings and material properties for printing a small section (approximately 4’ x 4’ x 2’) of a mold. Next, the second phase scaled up and integrated with the objective of capturing all of the necessary components (integrated heating to accelerate cure time, and vacuum, sealing) for resin infusion on a mold of significant size (8’ x 20’ x 6’).

  15. Additive subgroups of topological vector spaces

    CERN Document Server

    Banaszczyk, Wojciech

    1991-01-01

    The Pontryagin-van Kampen duality theorem and the Bochner theorem on positive-definite functions are known to be true for certain abelian topological groups that are not locally compact. The book sets out to present in a systematic way the existing material. It is based on the original notion of a nuclear group, which includes LCA groups and nuclear locally convex spaces together with their additive subgroups, quotient groups and products. For (metrizable, complete) nuclear groups one obtains analogues of the Pontryagin duality theorem, of the Bochner theorem and of the Lévy-Steinitz theorem on rearrangement of series (an answer to an old question of S. Ulam). The book is written in the language of functional analysis. The methods used are taken mainly from geometry of numbers, geometry of Banach spaces and topological algebra. The reader is expected only to know the basics of functional analysis and abstract harmonic analysis.

  16. Simple Additive Weighting to Diagnose Rabbit Disease

    Directory of Open Access Journals (Sweden)

    Ramadiani

    2018-01-01

    Full Text Available Rabbit is one of the many pets maintained by the general public in Indonesia. Like other pet, rabbits are also susceptible to various diseases. Society in general does not understand correctly the type of rabbit disease and the way of treatment. To help care for sick rabbits it is necessary a decision support system recommendation diagnosis of rabbit disease. The purpose of this research is to make the application of rabbit disease diagnosis system so that can help user in taking care of rabbit. This application diagnoses the disease by tracing the symptoms and calculating the recommendation of the disease using Simple Additive Weighting method. This research produces a web-based decision support system that is used to help rabbit breeders and the general public.

  17. Simple Additive Weighting to Diagnose Rabbit Disease

    Science.gov (United States)

    Ramadiani; Marissa, Dyna; Jundillah, Muhammad Labib; Azainil; Hatta, Heliza Rahmania

    2018-02-01

    Rabbit is one of the many pets maintained by the general public in Indonesia. Like other pet, rabbits are also susceptible to various diseases. Society in general does not understand correctly the type of rabbit disease and the way of treatment. To help care for sick rabbits it is necessary a decision support system recommendation diagnosis of rabbit disease. The purpose of this research is to make the application of rabbit disease diagnosis system so that can help user in taking care of rabbit. This application diagnoses the disease by tracing the symptoms and calculating the recommendation of the disease using Simple Additive Weighting method. This research produces a web-based decision support system that is used to help rabbit breeders and the general public.

  18. Erbium: alternative poison? stabilisation additive? what future?

    International Nuclear Information System (INIS)

    Porta, J.; Asou, M.

    2001-01-01

    Erbium was proposed as alternative poison to gadolinium at a very early stage. The potential interest of this poison compared to gadolinium is that it presents a relatively low ( 167 Er) absorption cross section in the thermal range and a non-negligible resonance integral that lead to a relatively slow consumption kinetic rather adapted to long or even very long cycles. The poisoning mode adapted to this poison, homogeneous in low concentration (< 3 %), does not downgrade the power distribution, on the one hand, as the absorption is low and spatially homogeneous, and the thermal conductivity, on the other hand, as the addition in the fuel oxide is in low quantity. A review of knowledge acquired as regards Er, from the 1960's to now, is presented. (authors)

  19. High-Efficient Circuits for Ternary Addition

    Directory of Open Access Journals (Sweden)

    Reza Faghih Mirzaee

    2014-01-01

    Full Text Available New ternary adders, which are fundamental components of ternary addition, are presented in this paper. They are on the basis of a logic style which mostly generates binary signals. Therefore, static power dissipation reaches its minimum extent. Extensive different analyses are carried out to examine how efficient the new designs are. For instance, the ternary ripple adder constructed by the proposed ternary half and full adders consumes 2.33 μW less power than the one implemented by the previous adder cells. It is almost twice faster as well. Due to their unique superior characteristics for ternary circuitry, carbon nanotube field-effect transistors are used to form the novel circuits, which are entirely suitable for practical applications.

  20. Feasibility and Testing of Additive Manufactured Components

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R [ORNL; Hummelt, Ed [Eaton Corporation; Solovyeva, Lyudmila [Eaton Corporation

    2016-09-01

    This project focused on demonstrating the ability to fabricate two parts with different geometry: an arc flash interrupter and a hydraulic manifold. Eaton Corporation provided ORNL solid models, information related to tolerances and sensitive parameters of the parts and provided testing and evaluation. ORNL successfully manufactured both components, provided cost models of the manufacturing (materials, labor, time and post processing) and delivered test components for Eaton evaluation. The arc flash suppressor was fabricated using the Renishaw laser powder bed technology in CoCrMo while the manifold was produced from Ti-6Al-4V using the Arcam electron beam melting technology. These manufacturing techniques were selected based on the design and geometrical tolerances required. A full-scale manifold was produced on the Arcam A2 system (nearly 12 inches tall). A portion of the manifold was also produced in the Arcam Q10 system. Although a full scale manifold could not be produced in the system, a full scale manifold is expected to have similar material properties, geometric accuracy, and surface finish as could be fabricated on an Arcam Q20 system that is capable of producing four full scale manifolds in a production environment. In addition to the manifold, mechanical test specimens, geometric tolerance artifacts, and microstructure samples were produced alongside the manifold. The development and demonstration of these two key components helped Eaton understand the impact additive manufacturing can have on many of their existing products. By working within the MDF and leveraging ORNL’s manufacturing and characterization capabilities, the work will ensure the rapid insertion and commercialization of this technology.

  1. Mechanical Properties of Additively Manufactured Thick Honeycombs

    Directory of Open Access Journals (Sweden)

    Reza Hedayati

    2016-07-01

    Full Text Available Honeycombs resemble the structure of a number of natural and biological materials such as cancellous bone, wood, and cork. Thick honeycomb could be also used for energy absorption applications. Moreover, studying the mechanical behavior of honeycombs under in-plane loading could help understanding the mechanical behavior of more complex 3D tessellated structures such as porous biomaterials. In this paper, we study the mechanical behavior of thick honeycombs made using additive manufacturing techniques that allow for fabrication of honeycombs with arbitrary and precisely controlled thickness. Thick honeycombs with different wall thicknesses were produced from polylactic acid (PLA using fused deposition modelling, i.e., an additive manufacturing technique. The samples were mechanically tested in-plane under compression to determine their mechanical properties. We also obtained exact analytical solutions for the stiffness matrix of thick hexagonal honeycombs using both Euler-Bernoulli and Timoshenko beam theories. The stiffness matrix was then used to derive analytical relationships that describe the elastic modulus, yield stress, and Poisson’s ratio of thick honeycombs. Finite element models were also built for computational analysis of the mechanical behavior of thick honeycombs under compression. The mechanical properties obtained using our analytical relationships were compared with experimental observations and computational results as well as with analytical solutions available in the literature. It was found that the analytical solutions presented here are in good agreement with experimental and computational results even for very thick honeycombs, whereas the analytical solutions available in the literature show a large deviation from experimental observation, computational results, and our analytical solutions.

  2. Utility of noise addition image made by using water phantom and image addition and subtraction software

    International Nuclear Information System (INIS)

    Watanabe, Ryo; Aoki, Takahiro; Hayano, Mizuho; Ogawa, Masato; Mituzono, Hiroki; Watanabe, Yuka

    2010-01-01

    In optimizing exposures, it is very important to evaluate the impact of image noise on image quality. To realize this, there is a need to evaluate how much image noise will make the subject disease invisible. But generally it is very difficult to shoot images of different quality in a clinical examination. Thus, a method to create a noise addition image by adding the image noise to raw data has been reported. However, this approach requires a special system, so it is difficult to implement in many facilities. We have invented a method to easily create a noise addition image by using the water phantom and image add-subtract software that accompanies the device. To create a noise addition image, first we made a noise image by subtracting the water phantom with different standard deviation (SD). A noise addition image was then created by adding the noise image to the original image. By using this method, a simulation image with intergraded SD can be created from the original. Moreover, the noise frequency component of the created noise addition image is as same as the real image. Thus, the relationship of image quality to SD in the clinical image can be evaluated. Although this method is an easy method of LDSI creation on image data, a noise addition image can be easily created by using image addition and subtraction software and water phantom, and this can be implemented in many facilities. (author)

  3. Additive Construction using Basalt Regolith Fines

    Science.gov (United States)

    Mueller, Robert P.; Sibille, Laurent; Hintze, Paul E.; Lippitt, Thomas C.; Mantovani, James G.; Nugent, Matthew W.; Townsend, Ivan I.

    2014-01-01

    Planetary surfaces are often covered in regolith (crushed rock), whose geologic origin is largely basalt. The lunar surface is made of small-particulate regolith and areas of boulders located in the vicinity of craters. Regolith composition also varies with location, reflecting the local bedrock geology and the nature and efficiency of the micrometeorite-impact processes. In the lowland mare areas (suitable for habitation), the regolith is composed of small granules (20 - 100 microns average size) of mare basalt and volcanic glass. Impacting micrometeorites may cause local melting, and the formation of larger glassy particles, and this regolith may contain 10-80% glass. Studies of lunar regolith are traditionally conducted with lunar regolith simulant (reconstructed soil with compositions patterned after the lunar samples returned by Apollo). The NASA Kennedy Space Center (KSC) Granular Mechanics & Regolith Operations (GMRO) lab has identified a low fidelity but economical geo-technical simulant designated as Black Point-1 (BP-1). It was found at the site of the Arizona Desert Research and Technology Studies (RATS) analog field test site at the Black Point lava flow in adjacent basalt quarry spoil mounds. This paper summarizes activities at KSC regarding the utilization of BP-1 basalt regolith and comparative work with lunar basalt simulant JSC-1A as a building material for robotic additive construction of large structures. In an effort to reduce the import or in-situ fabrication of binder additives, we focused this work on in-situ processing of regolith for construction in a single-step process after its excavation. High-temperature melting of regolith involves techniques used in glassmaking and casting (with melts of lower density and higher viscosity than those of metals), producing basaltic glass with high durability and low abrasive wear. Most Lunar simulants melt at temperatures above 1100 C, although melt processing of terrestrial regolith at 1500 C is not

  4. Drag reduction by natural polymeric additives in PMDS microchannel: Effect of types of additives

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Drag reduction technology was used in medical applications to enhance the blood flow in semiclogged blood streams which can be an alternative treatment for atherosclerosis. In this present study, natural polymeric drag reducing additives (DRA was introduced to replace synthetic polymer which has the possibility of bringing side effects to human health. Three different sources, namely okra, aloe vera and hibiscus were utilized to extract the natural polymeric additives which were then tested in custom made microchannel simulating human heart blood vessels. The performance of different types of additives was evaluated using pressure measurements. The maximum drag reduction up to 63.48% is achieved using 300 ppm of hibiscus mucilage at operating pressure of 50 mbar. In this present work, hibiscus showed the best drag reduction performance, giving the highest %FI in most of the cases. This experimental results proved that these natural polymeric additives could be utilized as DRA in enhancing the blood flow in semiclogged blood streams.

  5. Behaviors of Polymer Additives Under EHL and Influences of Interactions Between Additives on Friction Modification

    Science.gov (United States)

    Sakurai, T.

    1984-01-01

    Polymer additives have become requisite for the formulation of multigrade engine oils. The behavior of polymethacrylate (PMA)-thickened oils as lubricants in concentrated contacts under nominal rolling and pure sliding conditions was investigated by conventional optical interferometry. The PMA thickened oils behaved differently from the base oil in the formation of elastohydrodynamic (EHL) films. The higher the elastohydrodynamic molecular weight of the PMA contained in the lubricant, the thinner was the oil film under EHL conditions. The film thickness of shear-degraded PMA-thickened oils was also investigated. The behavior of graphite particles dispersed in both the base oil and the PMA-thickened oil was studied under pure sliding by taking photomicrographs. Many kinds of additives are contained in lubricating oil and the interactions between additives are considered. The interactions of zinc-organodithiophosphates (ZDP) with other additives is discussed.

  6. Additive action model for mixed irradiation

    International Nuclear Information System (INIS)

    Lam, G.K.Y.

    1984-01-01

    Recent experimental results indicate that a mixture of high and low LET radiation may have some beneficial features (such as lower OER but with skin sparing) for clinical use, and interest has been renewed in the study of mixtures of high and low LET radiation. Several standard radiation inactivation models can readily accommodate interaction between two mixed radiations, however, this is usually handled by postulating extra free parameters, which can only be determined by fitting to experimental data. A model without any free parameter is proposed to explain the biological effect of mixed radiations, based on the following two assumptions: (a) The combined biological action due to two radiations is additive, assuming no repair has taken place during the interval between the two irradiations; and (b) The initial physical damage induced by radiation develops into final biological effect (e.g. cell killing) over a relatively long period (hours) after irradiation. This model has been shown to provide satisfactory fit to the experiment results of previous studies

  7. Introduction to IGRT and additional components

    International Nuclear Information System (INIS)

    Mijnheer, Ben

    2008-01-01

    Image-guided radiation therapy is 'Any use of planar imaging, volumetric imaging or volumetric cine imaging, marker localization, marker tracking, patient surface imaging or patient surface tracking to improve the precision of radiation-therapy delivery' , or 'Frequent imaging in the treatment room during a course of radiotherapy to guide the treatment process'. Purpose: To verify if the correct volume in a patient is irradiated by imaging the target and/or healthy tissue prior to or during treatment. Imaging modalities include: Electronic Portal Imaging Devices (EPIDs); (Portal) imaging of implanted markers; Imaging of external markers; Ultrasound; X-ray fluoroscopy; and CT (MR) scanner in treatment room. Final remarks are as follows: The introduction of various IGRT techniques allowed 3D verification of the position of target volumes and organs at risk just before or during treatment. Because the information is in 3D, or sometimes even in 4D, in principle these IGRT approaches provide more information compared to the use of 2D verification methods (e.g. EPIDs). Clinical data are becoming available to assess quantitatively for which treatment techniques IGRT approaches are advantageous compared to the use of conventional verification methods taking the additional resources (time, money, manpower) into account. (P.A.)

  8. Additional EIPC Study Analysis. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gotham, Douglas J. [Purdue Univ., West Lafayette, IN (United States); Luciani, Ralph L. [Navigant Consultant Inc., Suwanee, GA (United States)

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  9. Yttrium addition for high temperatures stainless steel

    International Nuclear Information System (INIS)

    Furtado, Nelson Cesar Chaves Pinto

    1997-07-01

    The current work studied the effect of Yttrium on the microstructure of 2% Nb, modified - HP steel, with respect to its mechanical properties. Alloys were prepared with nominal Yttrium additions of 0,1% and 0,25%. Microstructural analyses and mechanical tests were undertaken in the as-cast condition and after ageing for 100 h at 700 deg C, 900 deg C and 1100 deg C. Structural characterization was performed by optical microscopy, scanning and transmission electron microscopy (SEM/TEM/EDS), X-ray diffractometry and X-ray photoelectron spectroscopy (XPS). Tensile testing was performed at room temperature and 871 deg C and creep testing at 925 deg C at a loading of 55 MPa. The material produced exhibited superior mechanical properties and surface oxidation resistance than traditional alloys of this class, even through gravity cast in a magnetic furnace. Agglomerates of Yttrium-rich phases were identifies in both as-cast and aged specimens, always associated with chromium carbides of characteristic morphologies. These morphologies, combined with the microstructural constituents, may have established the factors which resulted in the improved metallurgical stability of these alloys under the experimental testing conditions and temperatures which simulated real industrial service conditions and temperatures. (author)

  10. IN718 Additive Manufacturing Properties and Influences

    Science.gov (United States)

    Lambert, Dennis M.

    2015-01-01

    The results of tensile, fracture, and fatigue testing of IN718 coupons produced using the selective laser melting (SLM) additive manufacturing technique are presented. The data have been "sanitized" to remove the numerical values, although certain references to material standards are provided. This document provides some knowledge of the effect of variation of controlled build parameters used in the SLM process, a snapshot of the capabilities of SLM in industry at present, and shares some of the lessons learned along the way. For the build parameter characterization, the parameters were varied over a range that was centered about the machine manufacturer's recommended value, and in each case they were varied individually, although some co-variance of those parameters would be expected. Tensile, fracture, and high-cycle fatigue properties equivalent to wrought IN718 are achievable with SLM-produced IN718. Build and post-build processes need to be determined and then controlled to established limits to accomplish this. It is recommended that a multi-variable evaluation, e.g., design-of experiment (DOE), of the build parameters be performed to better evaluate the co-variance of the parameters.

  11. Additive Manufacturing of Ultem Polymers and Composites

    Science.gov (United States)

    Chuang, Kathy C.; Grady, Joseph E.; Draper, Robert D.; Shin, Euy-Sik E.; Patterson, Clark; Santelle, Thomas D.

    2015-01-01

    The objective of this project was to conduct additive manufacturing to produce aircraft engine components by Fused Deposition Modeling (FDM), using commercially available polyetherimdes Ultem 9085 and experimental Ultem 1000 filled with 10 chopped carbon fiber. A property comparison between FDM-printed and injection molded coupons for Ultem 9085, Ultem 1000 resin and the fiber-filled composite Ultem 1000 was carried out. Furthermore, an acoustic liner was printed from Ultem 9085 simulating conventional honeycomb structured liners and tested in a wind tunnel. Composite compressor inlet guide vanes were also printed using fiber-filled Ultem 1000 filaments and tested in a cascade rig. The fiber-filled Ultem 1000 filaments and composite vanes were characterized by scanning electron microscope (SEM) and acid digestion to determine the porosity of FDM-printed articles which ranged from 25-31. Coupons of Ultem 9085, experimental Ultem 1000 composites and XH6050 resin were tested at room temperature and 400F to evaluate their corresponding mechanical properties.

  12. Computational Process Modeling for Additive Manufacturing (OSU)

    Science.gov (United States)

    Bagg, Stacey; Zhang, Wei

    2015-01-01

    Powder-Bed Additive Manufacturing (AM) through Direct Metal Laser Sintering (DMLS) or Selective Laser Melting (SLM) is being used by NASA and the Aerospace industry to "print" parts that traditionally are very complex, high cost, or long schedule lead items. The process spreads a thin layer of metal powder over a build platform, then melts the powder in a series of welds in a desired shape. The next layer of powder is applied, and the process is repeated until layer-by-layer, a very complex part can be built. This reduces cost and schedule by eliminating very complex tooling and processes traditionally used in aerospace component manufacturing. To use the process to print end-use items, NASA seeks to understand SLM material well enough to develop a method of qualifying parts for space flight operation. Traditionally, a new material process takes many years and high investment to generate statistical databases and experiential knowledge, but computational modeling can truncate the schedule and cost -many experiments can be run quickly in a model, which would take years and a high material cost to run empirically. This project seeks to optimize material build parameters with reduced time and cost through modeling.

  13. Additive Manufacturing of Catalytically Active Living Materials.

    Science.gov (United States)

    Saha, Abhijit; Johnston, Trevor G; Shafranek, Ryan T; Goodman, Cassandra J; Zalatan, Jesse G; Storti, Duane W; Ganter, Mark A; Nelson, Alshakim

    2018-04-25

    Living materials, which are composites of living cells residing in a polymeric matrix, are designed to utilize the innate functionalities of the cells to address a broad range of applications such as fermentation and biosensing. Herein, we demonstrate the additive manufacturing of catalytically active living materials (AMCALM) for continuous fermentation. A multi-stimuli-responsive yeast-laden hydrogel ink, based on F127-dimethacrylate, was developed and printed using a direct-write 3D printer. The reversible stimuli-responsive behaviors of the polymer hydrogel inks to temperature and pressure are critical, as they enabled the facile incorporation of yeast cells and subsequent fabrication of 3D lattice constructs. Subsequent photo-cross-linking of the printed polymer hydrogel afforded a robust elastic material. These yeast-laden living materials were metabolically active in the fermentation of glucose into ethanol for 2 weeks in a continuous batch process without significant reduction in efficiency (∼90% yield of ethanol). This cell immobilization platform may potentially be applicable toward other genetically modified yeast strains to produce other high-value chemicals in a continuous biofermentation process.

  14. Additive Layer Manufacturing for Launcher's Applications

    Science.gov (United States)

    Vilanova, J.; Romera, P.; Lasagni, F.; Zorrilla, A.; Perinan, A.

    2014-06-01

    In the next years the European space industry has the challenge of maintaining its competitiveness in launch vehicles (LV) production, due to the growth of competition worldwide. It has to assure its position developing new applied technologies. In this field the effort is focussed on the production of short series of customized products, like payloads, flight components or launcher parts. ALM (Additive Layer Manufacturing) could be a powerful tool that offers new competitiveness factors for this industry, comprising a set of emerging technologies that are becoming a competitor to forming, casting and machining as well as being utilised directly as a complementary alternative.Originally used for prototypes and models, now ALM becomes a very useful technology capable to fabricate functional parts for the space industrial sector. Its demands on rapid technologies are different to "earth" industries, and they aren't so easily satisfied because space is a field with different requirements depending on its application: launchers, reusable vehicles, satellites, probes, low gravity researches, manned spacecraft, or even moon and planetary exploration.This paper reports on the ALM potential applications, under ESA requirements, exploring the challenges and possibilities for its use in the launchers market, trying to answer two basic questions: the first one, whether ALM is a mature technology to be ready for its use as flight hardware; and the second one, if it can be used to reduce the product cycle, and consequently, the development, production and operational costs.

  15. Stabilized zirconia with cerium and neodymium addition

    International Nuclear Information System (INIS)

    Andrade, I.M. de; Pessoa, R.C.; Nasar, M.C.; Nasar, R.S.; Rodriques, M.K.C.; Oliveira, J.F.

    2006-01-01

    Zr 0,9 Ce 0,05 Nd 0,05 O 1,975 system was synthesized with the use of the Pechini method. The polymeric resin was calcined at 350 deg C/3 h and analysed by FTIR that show bands relative to organic. Radicals esther type. The TGA curve indicated the polymeric decomposition occurring from 30 deg C to 740 deg C. DTA analysis show a exothermic peak in 100 deg C due to loss of water of material. From 500 deg C to 800 deg C was observed a intense peak due to polymer decomposition and the zirconia crystallization. The calcined powder from 350 deg C/3 h e 30 min to 900 deg/3 h were analysed by XRD that show the crystalline phase formation with the increase of temperature. The X-ray diffraction pattern show the presence of two phases, such as tetragonal and cubic of zirconia demonstrating that neodymium and cerium additions led to zirconia stabilization. (author)

  16. Structure Property Studies for Additively Manufactured Parts

    Energy Technology Data Exchange (ETDEWEB)

    Milenski, Helen M [Univ. of Mexico, Los Alamos, NM (United States); Schmalzer, Andrew Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kelly, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  17. Additional heating experiments of FRC plasmas

    International Nuclear Information System (INIS)

    Okada, S.; Asai, T.; Kodera, F.; Kitano, K.; Suzuki, T.; Yamanaka, K.; Kanki, T.; Inomoto, M.; Yoshimura, S.; Okubo, M.; Sugimoto, S.; Ohi, S.; Goto, S.

    2001-01-01

    Additional heating experiments of neutral beam (NB) injection and application of low frequency wave on a plasma with extremely high averaged beta value of about 90% - a field reversed configuration (FRC) plasma - are carried out on the FRC Injection experiment (FIX) apparatus. These experiments are made possible by translating the FRC plasma produced in a formation region of a theta pinch to a confinement region in order to secure better accessibility to heating facilities and to control plasma density. By appropriate choice of injection geometry and the mirror ratio of the confinement region, the NB with the energy of 14keV and the current of 23A is enabled to be injected into the FRC in the solenoidal confining field of only 0.04-0.05T. Confinement is improved by this experiment. Ion heating is observed by the application of low frequency (80kHz ; about 1/4 of the ion gyro frequency) compressional wave. A shear wave, probably mode converted from the compressional wave, is detected to propagate axially. (author)

  18. Additive manufacturing of transparent fused quartz

    Science.gov (United States)

    Luo, Junjie; Hostetler, John M.; Gilbert, Luke; Goldstein, Jonathan T.; Urbas, Augustine M.; Bristow, Douglas A.; Landers, Robert G.; Kinzel, Edward C.

    2018-04-01

    This paper investigates a filament-fed process for additive manufacturing (AM) of fused quartz. Glasses such as fused quartz have significant scientific and engineering applications, which include optics, communications, electronics, and hermetic seals. AM has several attractive benefits such as increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research into glass AM has focused primarily on nonoptical applications. Fused quartz is studied here because of its desirability for use in high-quality optics due to its high transmissivity and thermal stability. Fused quartz filaments are fed into a CO2 laser-generated molten region, smoothly depositing material onto the workpiece. Spectroscopy and pyrometry are used to measure the thermal radiation incandescently emitted from the molten region. The effects of the laser power and scan speed are determined by measuring the morphology of single tracks. Thin walls are printed to study the effects of layer-to-layer height. This information is used to deposit solid pieces including a cylindrical-convex shape capable of focusing visible light. The transmittance and index homogeneity of the printed fused quartz are measured. These results show that the filament-fed process has the potential to print transmissive optics.

  19. IN718 Additive Manufacturing Properties and Influences

    Science.gov (United States)

    Lambert, Dennis M.

    2015-01-01

    The results of tensile, fracture, and fatigue testing of IN718 coupons produced using the selective laser melting (SLM) additive manufacturing technique are presented. The data has been "generalized" to remove the numerical values, although certain references to material standards are provided. This document provides some knowledge of the effect of variation of controlled build parameters used in the SLM process, a snapshot of the capabilities of SLM in industry at present, and shares some of the lessons learned along the way. For the build parameter characterization, the parameters were varied over a range about the machine manufacturer's recommended value, and in each case they were varied individually, although some co-variance of those parameters would be expected. SLM-produced IN718, tensile, fracture, and high-cycle fatigue properties equivalent to wrought IN718 are achievable. Build and post-build processes need to be determined and then controlled to established limits to accomplish this. It is recommended that a multi-variable evaluation, e.g., design-of-experiment (DOE), of the build parameters be performed to better evaluate the co-variance of the parameters.

  20. Drag reduction by natural polymeric additives in PMDS microchannel: Effect of types of additives

    OpenAIRE

    Ling Fiona W.M.; Abdulbari Hayder A.

    2017-01-01

    Drag reduction technology was used in medical applications to enhance the blood flow in semiclogged blood streams which can be an alternative treatment for atherosclerosis. In this present study, natural polymeric drag reducing additives (DRA) was introduced to replace synthetic polymer which has the possibility of bringing side effects to human health. Three different sources, namely okra, aloe vera and hibiscus were utilized to extract the natural polymeric additives which were then tested ...

  1. Food Additives Permitted for Direct Addition to Food for Human Consumption; Folic Acid. Final rule.

    Science.gov (United States)

    2016-04-15

    The Food and Drug Administration (FDA or we) is amending the food additive regulations to provide for the safe use of folic acid in corn masa flour. We are taking this action in response to a food additive petition filed jointly by Gruma Corporation, Spina Bifida Association, March of Dimes Foundation, American Academy of Pediatrics, Royal DSM N.V., and National Council of La Raza.

  2. Additionality of global benefits and financial additionality in the context of the AIJ negotiations

    Energy Technology Data Exchange (ETDEWEB)

    Puhl, I.

    1996-12-31

    The Conference of the Party at their first meeting (COP1) took a decision regarding criteria for joint implementation as indicated in Art. 4.2 (a) of the FCCC which established a pilot phase for activities implemented jointly (AIJ) under the pilot phase. Besides some more technical issues this decision specified that such measures should bring about real, measurable and long-term environmental benefits related to the mitigation of climate change that would not have occurred in the absence of such activities. It also established that the financing of AIJ shall be additional to the financial obligations of developed country parties. These two requirements are called the additionality criteria for AIJ. The first refers to the realness of GHG emission abatement (which means reduction compared to a baseline) whereas the second describes that funds earmarked for AIJ have no other objective (i.e. profit making, export promotion) but to reduce GHG emissions to avoid the free-riding of investors and subsequently developed country parties. The reporting framework as well as the reporting requirements under national programs do not specify further the two types of additionality and even though research focuses on issues like baseline determination there has been no attempt so far to identify approaches which contribute towards defining strict and practicable methods and guidelines to frame additionality criteria. The first FCCC assessment of pilot project reporting revealed that in the reporting of activities, emissions additionality often remained unclear, especially in cases where AIJ was only a portion of an existing or already planned project, and that there is a point about how to account for financial additionality. It subsequently proposed to develop a uniform approach to baseline determination and the assessment of emission (reduction) additionality and financial additionality.

  3. Additive manufacturing technologies of porous metal implants

    Directory of Open Access Journals (Sweden)

    Yang Quanzhan

    2014-06-01

    Full Text Available Biomedical metal materials with good corrosion resistance and mechanical properties are widely used in orthopedic surgery and dental implant materials, but they can easily cause stress shielding due to the significant difference in elastic modulus between the implant and human bones. The elastic modulus of porous metals is lower than that of dense metals. Therefore, it is possible to adjust the pore parameters to make the elastic modulus of porous metals match or be comparable with that of the bone tissue. At the same time, the open porous metals with pores connected to each other could provide the structural condition for bone ingrowth, which is helpful in strengthening the biological combination of bone tissue with the implants. Therefore, the preparation technologies of porous metal implants and related research have been drawing more and more attention due to the excellent features of porous metals. Selective laser melting (SLM and electron beam melting technology (EBM are important research fields of additive manufacturing. They have the advantages of directly forming arbitrarily complex shaped metal parts which are suitable for the preparation of porous metal implants with complex shape and fine structure. As new manufacturing technologies, the applications of SLM and EBM for porous metal implants have just begun. This paper aims to understand the technology status of SLM and EBM, the research progress of porous metal implants preparation by using SLM and EBM, and the biological compatibility of the materials, individual design and manufacturing requirements. The existing problems and future research directions for porous metal implants prepared by SLM and EBM methods are discussed in the last paragraph.

  4. Transparent Conductive Ink for Additive Manufacturing

    Science.gov (United States)

    Patlan, X. J.; Rolin, T. D.

    2017-01-01

    NASA analyzes, tests, packages, and fabricates electrical, electronic, and electromechanical (EEE) parts. Nanotechnology is listed in NASA's Technology Roadmap as a key area to invest for further development.1 This research project focused on using nanotechnology to improve electroluminescent lighting in terms of additive manufacturing and to increase energy efficiency. Specifically, this project's goal was to produce a conductive but transparent printable ink that can be sprayed on any surface for use as one of the electrodes in electroluminescent device design. This innovative work is known as thick film dielectric electroluminescent (TDEL) technology. TDEL devices are used for "backlighting, illumination, and identification due to their tunable color output, scalability, and efficiency" (I.K. Small, T.D. Rolin, and A.D. Shields, "3D Printed Electroluminescent Light Panels," NASA Fiscal Year 2017 Center Innovation Fund Proposal, unpublished data, 2017). These devices use a 'front-to-back' printing method, where the substrate is the transparent layer, and the dielectric and phosphor are layered on top. This project is a first step in the process of creating a 3D printable 'back-to-front' electroluminescent device. Back-to-front 3D-printed devices are beneficial because they can be printed onto different substrates and embedded in different surfaces, and the substrate is not required to be transparent, all because the light is emitted from the top surface through the transparent conductor. Advances in this area will help further development of printing TDEL devices on an array of different surfaces. Figure 1 demonstrates the layering of the two electrodes that are aligned in a parallel plate capacitor structure (I.K. Small, T.D. Rolin, and A.D. Shields, "3D Printed Electroluminescent Light Panels," NASA Fiscal Year 2017 Center Innovation Fund Proposal, unpublished data, 2017). Voltage is applied across the device, and the subsequent electron excitation results in

  5. Grassland Soil Carbon Responses to Nitrogen Additions

    Science.gov (United States)

    Hofmockel, K. S.; Tfailly, M.; Callister, S.; Bramer, L.; Thompson, A.

    2017-12-01

    Using a long-term continental scale experiment, we tested if increases in nitrogen (N) inputs augment the accumulation of plant and microbial residues onto mineral soil surfaces. This research investigates N effects on molecular biogeochemistry across six sites from the Nutrient Network (NutNet) experiment. The coupling between concurrently changing carbon (C) and N cycles remains a key uncertainty in understanding feedbacks between the terrestrial C cycle and climate change. Existing models do not consider the full suite of linked C-N processes, particularly belowground, that could drive future C-climate feedbacks. Soil harbors a wealth of diverse organic molecules, most of which have not been measured in hypothesis driven field research. For the first time we systematically assess the chemical composition of soil organic matter (SOM) and functional characteristics of the soil microbiome, to enhance our understanding of the molecular underpinnings of ecosystem C and N cycling. We have acquired soils from 5 ecosystem experiments across the US that have been subjected to 8 years of N addition treatments. These soils have been analyzed for chemical composition to identify how the soil fertility and stability is altered by N fertilization. We found distinct SOM signatures from our field experiments and shifts in soil chemistry in response to 8 years of N fertilization. Across all sites, we found the molecular composition of SOM varied with clay content, supporting the importance of soil mineralogy in the accumulation of specific chemical classes of SOM. While many molecules were common across sites, we discovered a suite of molecules that were site specific. N fertilization had a significant effect on SOM composition. Differences between control and N amended plots were greater in sites rich in lipids and more complex molecules, compared to sites with SOM rich in amino-sugar and protein like substances. Our results have important implications for how SOM is

  6. Helicon plasma with additional immersed antenna

    International Nuclear Information System (INIS)

    Aanesland, A; Charles, C; Boswell, R W; Fredriksen, A

    2004-01-01

    A 'primary' RF power (H-power) at 13.56 MHz is coupled to a plasma source excited by an external double saddle field Helicon antenna. A 'secondary' RF power (S-power), also at 13.56 MHz but with variable phase, is additionally coupled by inserting a second antenna in contact with the plasma through one end of the source. The immersed antenna can be grounded or floating, allowing a self-bias to form in the latter case. Changes in the plasma density and electron temperature are measured in both cases with varying power on the immersed antenna. The plasma potential increases dramatically with S-power in the grounded case, and is found to be similar in size to the sum of the plasma potential and the self-bias formed in the floating case for all powers. Hence, the sheath between the immersed antenna and the plasma is shown to be equal in both the grounded and floating cases. Although the power efficiency does not vary significantly as a function of the S-power, it is consistently lower for the grounded case possibly as a result of a dc current to ground. The plasma parameters are drastically changed as the phase between the two antennae are varied (floating case), and a sinusoidal function was fitted to the plasma parameters as a function of the phase shift. The calculated power loss to the antenna indicates that the power efficiency of the immersed antenna, as the phase is changed, is altered from 80% to 10%

  7. Fatigue crack growth in additive manufactured products

    Directory of Open Access Journals (Sweden)

    A. Riemer

    2015-10-01

    Full Text Available Additive Manufacturing (AM is a new innovative technique that allows the direct fabrication of complex, individual, delicate and high-strength products, based on their 3D data. Selective Laser Melting (SLM is one of the AM processes that generates metallic components layer by layer using powder-bed technique. The irradiation and consequent melting of metallic powder is realised by the laser source. Employing SLM, especially complex and individual products, such as implants or aerospace parts, are well suited for economic production in small batches. The first important issue in this work was to analyse the fatigue crack growth (FCG in titanium alloy Ti-6-4 and stainless steel 316L processed by SLM. As a first step, stress intensity range decreasing tests were performed on SLM samples in their “as-built” condition. The next step was to adopt measures for optimisation of fatigue crack growth performance of SLM parts. For this purpose various heat treatments such as stress relief annealing and hot isostatic pressing (HIP were applied to the CT specimens. Finally, the strong impact of heat treatment on the residual lifetime was demonstrated by numerical fatigue crack growth simulations. For this purpose, the hip joint implant consisting of Ti-6-4 and processed by SLM was taken into account. It was found that residual stresses have a strong influence on the crack growth in Ti-6-4, while the influence of the micro-pores on the threshold values remains low. In contrast the results for 316L show that its fracturemechanical behaviour is not affected by residual stresses, whereas the microstructural features lead to modification in the da/dN-K-data. The second fundamental aim of this work was to demonstrate the possibilities of the SLM process. For that reason, the individually tailored bicycle crank was optimised regarding its weight and local stresses and finally manufactured using the SLM system. The iterative optimisation procedure was based on

  8. Competency Based Hospital Radiopharmacy Training. Additional Information

    International Nuclear Information System (INIS)

    2010-01-01

    Quality management systems in nuclear medicine are vital to a high level of nuclear medicine (NM) practice. Trained and competent staffs are essential for achieving high standards and growth in NM. One of the key bottlenecks for NM is the shortfall in human resources, especially of radiopharmacists. There is an acute shortage in most Member States and in some countries an absence of nationally registered pharmacists with radiopharmacy experience. Most nuclear medicine facilities operate their radiopharmacies (commonly referred to as the hot laboratories) with the support of technologists and radiographers. Recent surveys have found the level of training amongst technologists to be extremely variable. Most had little or no training in hot laboratory practices. The survey also indicated the poor state of hot laboratories in many countries. Basic quality systems in the hot laboratory could be improved significantly with better training. This competency-based education manual is designed with those radiopharmacy practitioners in mind. This competency-based trainer's manual provides trainers in each of the IAEA regions with the essentials of a training programme for all radiopharmacy practitioners. The competency-based training is a two week programme followed up with three months of practice achievements. The syllabus provides a standardized approach to lectures, practical sessions, and interactive workshops focusing on critical aspects of hot laboratory practices. The trainers, with the assistance of this manual, can deliver essential skills, competencies, and underpinning knowledge to operate safely and effectively in their hot laboratory. The course focuses on simple but practical steps that could be undertaken to improve staff performance. In addition, a basic framework of quality management principles related to radiopharmacy practices is also covered. Further, the syllabus can be adapted to the particular needs and characteristics of any training centre, country

  9. Oxidation kinetic changes of UO2 by additive addition and irradiation

    International Nuclear Information System (INIS)

    You, Gil-Sung; Kim, Keon-Sik; Min, Duck-Kee; Ro, Seung-Gy

    2000-01-01

    The kinetic changes of air-oxidation of UO 2 by additive addition and irradiation were investigated. Several kinds of specimens, such as unirradiated-UO 2 , simulated-UO 2 for spent PWR fuel (SIMFUEL), unirradiated-Gd-doped UO 2 , irradiated-UO 2 and -Gd-doped UO 2 , were used for these experiments. The oxidation results represented that the kinetic patterns among those samples are remarkably different. It was also revealed that the oxidation kinetics of irradiated-UO 2 seems to be more similar to that of unirradiated-Gd-doped UO 2 than that of SIMFUEL

  10. 21 CFR 25.32 - Foods, food additives, and color additives.

    Science.gov (United States)

    2010-04-01

    ... use in food, drugs, devices, or cosmetics. (d) Testing and certification of batches of a color... for humans or animals on FDA's initiative or in response to a petition, under parts 182, 184, 186, or... for humans or animals to use as animal feeds. (i) Approval of a food additive petition or GRAS...

  11. Comparison of Various Dynamic Balancing Principles Regarding Additional Mass and Additional Inertia

    NARCIS (Netherlands)

    van der Wijk, V.; Demeulenaere, Bram; Herder, Justus Laurens

    2009-01-01

    The major disadvantage of existing dynamic balancing principles is that a considerable amount of mass and inertia is added to the system. The objectives of this article are to summarize, to compare, and to evaluate existing complete balancing principles regarding the addition of mass and the

  12. The retro Grignard addition reaction revisited: the reversible addition of benzyl reagents to ketones

    DEFF Research Database (Denmark)

    Christensen, Stig Holden; Holm, Torkil; Madsen, Robert

    2014-01-01

    transformation. The retro benzyl reaction was shown by the addition of benzylmagnesium chloride to di-tert-butyl ketone followed by exchange of both the benzyl and the ketone moiety with another substrate. Similar experiments were performed with phenylmagnesium bromide and tert-butylmagnesium chloride...

  13. Co-occurring nonnative woody shrubs have additive and non-additive soil legacies.

    Science.gov (United States)

    Kuebbing, Sara E; Patterson, Courtney M; Classen, Aimée T; Simberloff, Daniel

    2016-09-01

    To maximize limited conservation funds and prioritize management projects that are likely to succeed, accurate assessment of invasive nonnative species impacts is essential. A common challenge to prioritization is a limited knowledge of the difference between the impacts of a single nonnative species compared to the impacts of nonnative species when they co-occur, and in particular predicting when impacts of co-occurring nonnative species will be non-additive. Understanding non-additivity is important for management decisions because the management of only one co-occurring invader will not necessarily lead to a predictable reduction in the impact or growth of the other nonnative plant. Nonnative plants are frequently associated with changes in soil biotic and abiotic characteristics, which lead to plant-soil interactions that influence the performance of other species grown in those soils. Whether co-occurring nonnative plants alter soil properties additively or non-additively relative to their effects on soils when they grow in monoculture is rarely addressed. We use a greenhouse plant-soil feedback experiment to test for non-additive soil impacts of two common invasive nonnative woody shrubs, Lonicera maackii and Ligustrum sinense, in deciduous forests of the southeastern United States. We measured the performance of each nonnative shrub, a native herbaceous community, and a nonnative woody vine in soils conditioned by each shrub singly or together in polyculture. Soils conditioned by both nonnative shrubs had non-additive impacts on native and nonnative performance. Root mass of the native herbaceous community was 1.5 times lower and the root mass of the nonnative L. sinense was 1.8 times higher in soils conditioned by both L. maackii and L. sinense than expected based upon growth in soils conditioned by either shrub singly. This result indicates that when these two nonnative shrubs co-occur, their influence on soils disproportionally favors persistence

  14. 37 CFR 1.776 - Calculation of patent term extension for a food additive or color additive.

    Science.gov (United States)

    2010-07-01

    ... extension for a food additive or color additive. 1.776 Section 1.776 Patents, Trademarks, and Copyrights... Calculation of patent term extension for a food additive or color additive. (a) If a determination is made pursuant to § 1.750 that a patent for a food additive or color additive is eligible for extension, the term...

  15. Addition of electric arc furnace dust in hot metal changing the form of addition

    International Nuclear Information System (INIS)

    Marques Sobrinho, Vicente de Paulo Ferreira; Oliveira, Jose Roberto de; Vieira, Estefano Aparecido; Telles, Victor Bridi; Grillo, Felipe Fardin; Tenorio, Jorge Alberto Soares; Espinosa, Denise Crocce Romano

    2014-01-01

    This research aims to study the incorporation of the mass of electric arc furnace dust (EAFD), by addition in hot metal (1.78% Si) at a temperature of 1,400 degrees Celsius. The EAFD is from a steel plant producing long steel. The addition of the EAFD was as received, in the form of briquettes without agitation of the hot metal and in the form of briquettes with agitation of the hot metal. Previously, the EAFD was characterized using the following techniques: chemical analysis, size analysis, X-ray diffraction, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) microanalysis. The achievement of fusion experiments in laboratory scale, took place in a vertical tubular furnace with temperature control. The fusion experiments to assess the incorporation of EAFD mass used graphite crucibles. After cooling, the hot metal and the slag, remaining in the crucible, were weighed to do a mass balance. A flow of inert gas (argon) was maintained inside the furnace during the experiments. Results show that the experiment with addition of EAFD as received presents the best result of incorporating the mass of the final hot metal (1.73%) combined with the lowest percentage of volatilized mass of EAFD (46.52%). The experiment addition of EAFD in the form of briquette with agitation of hot metal presents the lowest percentage of slag mass (4.58%). The zinc content of volatilized EAFD (64.30%) is higher than the zinc content of the imported ore concentrate (52%) and zinc content of the national ore concentrate (12% to 39%). The presence of lead and cadmium in the slag characterizing it as a hazardous solid waste. (author)

  16. Additional safety assessment of ITER - Addition safety investigation of the INB ITER

    International Nuclear Information System (INIS)

    2012-01-01

    This assessment aims at re-assessing safety margins in the light of events which occurred in Fukushima Daiichi, i.e. extreme natural events challenging the safety of installations. After a presentation of some characteristics of the ITER installation (location, activities, buildings, premise detritiation systems, electric supply, handling means, radioactive materials, chemical products, nuclear risks, specific risks), the report addresses the installation robustness by identifying cliff-edge effect risks which can be related to a loss of confinement of radioactive materials, explosions, a significant increase of exposure level, a possible effect on water sheets, and so on. The next part addresses the various aspects related to a seismic risk: installation sizing (assessment methodology, seismic risk characterization in Cadarache), sizing protection measures, installation compliance, and margin assessment. External flooding is the next addressed risk: installation sizing with respect to this specific risk, protection measures, installation compliance, margin assessment, and studied additional measures. Other extreme natural phenomena are considered (meteorological conditions, earthquake and flood) which may have effects on other installations (dam, canal). Then, the report addresses technical risks like the loss of electric supplies and cooling systems, the way a crisis is managed in terms of technical and human means and organization in different typical accidental cases. Subcontracting practices are also discussed. A synthesis proposes an overview of this additional safety assessment and discusses the impact which could have additional measures which could be implemented

  17. Estimation of the additive and dominance variances in SA Landrace ...

    African Journals Online (AJOL)

    NORRIS

    South African Journal of Animal Science 2006, 36 (4) ... Fuerst (1996) simulated a genetic model with different levels of additive, dominance and additive by additive genetic effects to .... However, a simulation study by Norris et al. (2002) ...

  18. Additive Biotech-Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology.

    Science.gov (United States)

    Krujatz, Felix; Lode, Anja; Seidel, Julia; Bley, Thomas; Gelinsky, Michael; Steingroewer, Juliane

    2017-10-25

    The diversity and complexity of biotechnological applications are constantly increasing, with ever expanding ranges of production hosts, cultivation conditions and measurement tasks. Consequently, many analytical and cultivation systems for biotechnology and bioprocess engineering, such as microfluidic devices or bioreactors, are tailor-made to precisely satisfy the requirements of specific measurements or cultivation tasks. Additive manufacturing (AM) technologies offer the possibility of fabricating tailor-made 3D laboratory equipment directly from CAD designs with previously inaccessible levels of freedom in terms of structural complexity. This review discusses the historical background of these technologies, their most promising current implementations and the associated workflows, fabrication processes and material specifications, together with some of the major challenges associated with using AM in biotechnology/bioprocess engineering. To illustrate the great potential of AM, selected examples in microfluidic devices, 3D-bioprinting/biofabrication and bioprocess engineering are highlighted. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Co-occurring nonnative woody shrubs have additive and non-additive soil legacies

    DEFF Research Database (Denmark)

    Kuebbing, Sara E.; Patterson, Courtney M.; Classen, Aimee Taylor

    2016-01-01

    shrubs, Lonicera maackii and Ligustrum sinense, in deciduous forests of the southeastern United States. We measured the performance of each nonnative shrub, a native herbaceous community, and a nonnative woody vine in soils conditioned by each shrub singly or together in polyculture. Soils conditioned...... by both nonnative shrubs had non-additive impacts on native and nonnative performance. Root mass of the native herbaceous community was 1.5 times lower and the root mass of the nonnative L. sinense was 1.8 times higher in soils conditioned by both L. maackii and L. sinense than expected based upon growth...... in soils conditioned by either shrub singly. This result indicates that when these two nonnative shrubs co-occur, their influence on soils disproportionally favors persistence of the nonnative L. sinense relative to this native herbaceous community, and could provide an explanation of why native species...

  20. Fluxional additives: a second generation control in enantioselective catalysis.

    Science.gov (United States)

    Sibi, Mukund P; Manyem, Shankar; Palencia, Hector

    2006-10-25

    The concept of "fluxional additives", additives that can adopt enantiomeric conformations depending on the chiral information in the ligand, is demonstrated in enantioselective Diels-Alder and nitrone cycloaddition reactions. The additive design is modular, and diverse structures are accessible in three steps. Chiral Lewis acids from main group and transition metals show enhancements in enantioselectivity in the presence of these additives.

  1. 21 CFR 170.38 - Determination of food additive status.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Determination of food additive status. 170.38... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES Food Additive Safety § 170.38 Determination of food additive status. (a) The Commissioner may, in accordance with § 170.35(b)(4) or (c)(5...

  2. 21 CFR 570.38 - Determination of food additive status.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Determination of food additive status. 570.38... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES Food Additive Safety § 570.38 Determination of food additive status. (a) The Commissioner may, in accordance with § 570.35 (b)(4) or (c)(5...

  3. 77 FR 53801 - Nexira; Filing of Food Additive Petition; Amendment

    Science.gov (United States)

    2012-09-04

    .... FDA-2011-F-0765] Nexira; Filing of Food Additive Petition; Amendment AGENCY: Food and Drug... filing notice for a food additive petition filed by Nexira proposing that the food additive regulations... Register on December 20, 2011 (76 FR 78866), FDA announced that a food additive petition (FAP 1A4784) had...

  4. 21 CFR 170.10 - Food additives in standardized foods.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Food additives in standardized foods. 170.10... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES General Provisions § 170.10 Food additives... the Act, which proposes the inclusion of a food additive in such definition and standard of identity...

  5. 21 CFR 170.18 - Tolerances for related food additives.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Tolerances for related food additives. 170.18... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES General Provisions § 170.18 Tolerances for related food additives. (a) Food additives that cause similar or related pharmacological effects will be...

  6. Prevalence of phosphorus containing food additives in grocery stores

    Directory of Open Access Journals (Sweden)

    Janeen B. Leon

    2012-06-01

    In conclusion, phosphorus additives are commonly present in groceries and contribute significantly to the phosphorus content of foods. Moreover, phosphorus additive foods are less costly than additive-free foods. As a result, phosphorus additives may be an important contributor to hyperphosphatemia among persons with chronic kidney disease

  7. A generalized additive regression model for survival times

    DEFF Research Database (Denmark)

    Scheike, Thomas H.

    2001-01-01

    Additive Aalen model; counting process; disability model; illness-death model; generalized additive models; multiple time-scales; non-parametric estimation; survival data; varying-coefficient models......Additive Aalen model; counting process; disability model; illness-death model; generalized additive models; multiple time-scales; non-parametric estimation; survival data; varying-coefficient models...

  8. 21 CFR 81.1 - Provisional lists of color additives.

    Science.gov (United States)

    2010-04-01

    ... GENERAL SPECIFICATIONS AND GENERAL RESTRICTIONS FOR PROVISIONAL COLOR ADDITIVES FOR USE IN FOODS, DRUGS... not to be construed as a listing for surgical suture use unless color additive petitions have been... the color additive for such use. The color additives listed in paragraphs (a), (b), and (c) of this...

  9. 76 FR 47210 - Notices of Filing of Petitions for Food Additives and Color Additives; Relocation in the Federal...

    Science.gov (United States)

    2011-08-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0518] Notices of Filing of Petitions for Food Additives and Color Additives; Relocation in the Federal Register...) is notifying the public that notices of filing of petitions for food additives and color additives...

  10. An Additive-Multiplicative Cox-Aalen Regression Model

    DEFF Research Database (Denmark)

    Scheike, Thomas H.; Zhang, Mei-Jie

    2002-01-01

    Aalen model; additive risk model; counting processes; Cox regression; survival analysis; time-varying effects......Aalen model; additive risk model; counting processes; Cox regression; survival analysis; time-varying effects...

  11. Facts about food irradiation: Irradiation and food additives and residues

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet considers the issue of the irradiation of food containing food additives or pesticide residues. The conclusion is that there is no health hazard posed by radiolytic products of pesticides or food additives. 1 ref

  12. A ¤flexible additive multiplicative hazard model

    DEFF Research Database (Denmark)

    Martinussen, T.; Scheike, T. H.

    2002-01-01

    Aalen's additive model; Counting process; Cox regression; Hazard model; Proportional excess harzard model; Time-varying effect......Aalen's additive model; Counting process; Cox regression; Hazard model; Proportional excess harzard model; Time-varying effect...

  13. Effect of Additives on the Physicochemical and Drug Release ...

    African Journals Online (AJOL)

    Purpose: To prepare and evaluate spherical agglomerates of pioglitazone hydrochloride (PGH) for direct compression with different additives. Method: Spherical agglomerates of pioglitazone hydrochloride were prepared by emulsion solvent diffusion method with and without additives (polyethylene glycol 6000, polyvinyl ...

  14. An Additively Manufactured Torch Igniter for Liquid Propellants

    Data.gov (United States)

    National Aeronautics and Space Administration — Consistent and reliable rocket engine ignition has yet to be proven through an additively manufactured torch igniter for liquid propellants. The coupling of additive...

  15. USABILITY OF ADDITIVE MANUFACTURING (THREEDIMENSIONAL PRINTING) TECHNOLOGIES IN EDUCATION

    OpenAIRE

    ÖZSOY, KORAY; DUMAN, BURHAN

    2017-01-01

    Additive manufacturing technologies which are emerge in 1980’s years, they are using for prototip production in first time for that reason their denomination rapid prototyping . Nowadays it called additive manufacturing because of it using for end use functional part’s production. In additive manufacturing, the basic rationales the same, but many different technologies have been developed to manufacture with different approaches. The most common additive manufacturing technologies are stereol...

  16. Entropies of the automata networks with additive rule

    Institute of Scientific and Technical Information of China (English)

    Guo-qingGU; GeCHEN; 等

    1996-01-01

    The matrix presentation for automata networks with additive rule are described.A set of entropy theorems of additive automata network are proved and an analytic formula of its entropy is built.For example,we proved that the topological entropy is identically equal to metric entropy for an additive antomata network.

  17. 78 FR 6272 - Rules Relating to Additional Medicare Tax; Correction

    Science.gov (United States)

    2013-01-30

    ... Rules Relating to Additional Medicare Tax; Correction AGENCY: Internal Revenue Service (IRS), Treasury... regulations are relating to Additional Hospital Insurance Tax on income above threshold amounts (``Additional Medicare Tax''), as added by the Affordable Care Act. Specifically, these proposed regulations provide...

  18. 75 FR 17145 - Food Additives; Bisphenol A; Availability

    Science.gov (United States)

    2010-04-05

    ...] Food Additives; Bisphenol A; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice... contact materials. Uses of BPA were approved by FDA under its food additive regulations in the early 1960s..., Division of 2009 Food Contact Notifications, Office of Food Additive Safety, Center for Food Safety and...

  19. 76 FR 78866 - Nexira; Filing of Food Additive Petition

    Science.gov (United States)

    2011-12-20

    .... FDA-2011-F-0765] Nexira; Filing of Food Additive Petition AGENCY: Food and Drug Administration, HHS... filed a petition proposing that the food additive regulations be amended to provide for the expanded... Cosmetic Act (section 409(b)(5) (21 U.S.C. 348(b)(5))), notice is given that a food additive petition (FAP...

  20. 77 FR 5201 - Ecolab, Inc.; Filing of Food Additive Petition

    Science.gov (United States)

    2012-02-02

    .... FDA-2011-F-0853] Ecolab, Inc.; Filing of Food Additive Petition AGENCY: Food and Drug Administration... Ecolab, Inc., has filed a petition proposing that the food additive regulations be amended to provide for...-1390. The petition proposes to amend the food additive regulations in 21 CFR part 173, Secondary Direct...