WorldWideScience

Sample records for separator on-line laser

  1. The Leuven isotope separator on-line laser ion source

    CERN Document Server

    Kudryavtsev, Y; Franchoo, S; Huyse, M; Gentens, J; Kruglov, K; Müller, W F; Prasad, N V S; Raabe, R; Reusen, I; Van den Bergh, P; Van Duppen, P; Van Roosbroeck, J; Vermeeren, L; Weissman, L

    2002-01-01

    An element-selective laser ion source has been used to produce beams of exotic radioactive nuclei and to study their decay properties. The operational principle of the ion source is based on selective resonant laser ionization of nuclear reaction products thermalized and neutralized in a noble gas at high pressure. The ion source has been installed at the Leuven Isotope Separator On-Line (LISOL), which is coupled on-line to the cyclotron accelerator at Louvain-la-Neuve. sup 5 sup 4 sup , sup 5 sup 5 Ni and sup 5 sup 4 sup , sup 5 sup 5 Co isotopes were produced in light-ion-induced fusion reactions. Exotic nickel, cobalt and copper nuclei were produced in proton-induced fission of sup 2 sup 3 sup 8 U. The b decay of the sup 6 sup 8 sup - sup 7 sup 4 Ni, sup 6 sup 7 sup - sup 7 sup 0 Co, sup 7 sup 0 sup - sup 7 sup 5 Cu and sup 1 sup 1 sup 0 sup - sup 1 sup 1 sup 4 Rh isotopes has been studied by means of beta-gamma and gamma-gamma spectroscopy. Recently, the laser ion source has been used to produce neutron-d...

  2. Daresbury on-line isotope separator (DOLIS)

    Energy Technology Data Exchange (ETDEWEB)

    Grant, I.S.; Eastham, D.A.; Groves, J.; Tolfree, D.W.L.; Walker, P.M.; Green, V.R.; Rikovska, J.; Stone, N.J.; Hamilton, W.D.

    1987-05-01

    The isotope separator DOLIS, which is on-line to the Daresbury Laboratory's 20-MV tandem accelerator, is used to measure nuclear moments and decay schemes. Separated beams may be collected on a tape and transported to a counting station, implanted directly into a host lattice at on-line temperatures down to less than 10 mK, or allowed to interact with a collinear laser beam. The present status of DOLIS and its ancillary equipment is described.

  3. Recent developments in production of radioactive ion beams with the selective laser ion source at the on-line isotope separator ISOLDE

    CERN Document Server

    Catherall, Richard; Köster, U; Lettry, Jacques; Suberlucq, Guy; Marsh, Bruce A; Tengborn, Elisabeth

    2004-01-01

    The production of radioactive ionization laser ion source (RILIS) of ISOLDE on-line isotope separation facility was investigated. The RILIS setup included three dye lasers and ionization schemes which employ three resonant transitions were also used. The RILIS efficiency could be reduced by nuclear effects such as hyperfine splitting and isotope shifts. The off-line resonance ionization spectroscopy determined optimal three-step ionization schemes for yttrium, scandium and antimony and antimony. The results show that best ionization schemes of Y provided gain factor of 15 with respect to surface ionization. (Edited abstract) 8 Refs.

  4. The Daresbury On-Line Isotope Separator (DOLIS)

    Science.gov (United States)

    Grant, I. S.; Eastham, D. A.; Groves, J.; Tolfree, D. W. L.; Walker, P. M.; Green, V. R.; Rikovska, J.; Stone, N. J.; Hamilton, W. D.

    1987-05-01

    The isotope separator DOLIS, which is on-line to the Daresbury Laboratory's 20-MV tandem accelerator, is used to measure nuclear moments and decay schemes. Separated beams may be collected on a tape and transported to a counting station, implanted directly into a host lattice at on-line temperatures down to less than 10 mK, or allowed to interact with a collinear laser beam. The present status of DOLIS and its ancillary equipment is described.

  5. On-line laser spectroscopy with thermal atomic beams

    CERN Document Server

    Thibault, C; De Saint-Simon, M; Duong, H T; Guimbal, P; Huber, G; Jacquinot, P; Juncar, P; Klapisch, Robert; Liberman, S; Pesnelle, A; Pillet, P; Pinard, J; Serre, J M; Touchard, F; Vialle, J L

    1981-01-01

    On-line high resolution laser spectroscopy experiments have been performed in which the light from a CW tunable dye laser interacts at right angles with a thermal atomic beam. /sup 76-98/Rb, /sup 118-145 /Cs and /sup 208-213/Fr have been studied using the ionic beam delivered by the ISOLDE on-line mass separator at CERN while /sup 30-31/Na and /sup 38-47/K have been studied by setting the apparatus directly on-line with the PS 20 GeV proton beam. The principle of the method is briefly explained and some results concerning nuclear structure are given. The hyperfine structure, spins and isotope shifts of the alkali isotopes and isomers are measured. (8 refs).

  6. On-Line Mass Separator of Superheavy Atoms

    CERN Document Server

    Oganessian, Yu T

    2002-01-01

    The concept is presented of an on-line Mass Analyzer of SuperHeavy Atoms (MASHA) dedicated to the separation and determination of the mass and decay properties of new elements and isotopes produced in heavy-ion induced reactions. The new nuclides with half-lives T_{1/2}\\ge 1 s are transported to an ECR-source working at a frequency of 2.45 GHz and are separated by mass with a mass resolution of M/\\Delta M\\sim 1500. In the focal plane of the magnetic analyzer a front strip detector surrounded by side detectors will be placed to determine the mass according to the signals from the detected alpha-particles or fission fragments with efficiency of about 90 %. In comparison to other existing in-flight recoil separators, the present setup will be characterized by higher efficiency and high selectivity relative to background reaction products. The setup MASHA may be used also in the investigation of nuclear reactions of different type induced by stable and radioactive beams.

  7. On-line separation of short-lived beryllium isotopes

    CERN Document Server

    Köster, U; Catherall, R; Fedosseev, V; Georg, U; Huber, G; Jading, Y; Jonsson, O; Koizumi, M; Kratz, K L; Kugler, E; Lettry, Jacques; Mishin, V I; Ravn, H L; Sebastian, V; Tamburella, C; Wöhr, A

    1998-01-01

    With the development of a new laser ionization scheme, it became possible to ionize beryllium efficiently in the hot cavity of the ISOLDE laser ion source. The high target and ion source temperatures enable the release of short-lived beryllium isotopes. Thus all particle-stable beryllium isotopes could be extracted from a standard uranium carbide/graphite target. For the first time the short-lived isotopes /sup 12/Be and /sup 14/Be could be identified at an ISOL facility, /sup 14/Be being among the most short-lived isotopes separated so far at ISOLDE. The release time from the UC/graphite target was studied with several beryllium isotopes. Profiting from the element selectivity of laser ionization, the strong and isotopically pure beam of /sup 12/Be allowed to determine the half- life to T/sub 1/2 /=21.34(23) ms and the probability of beta-delayed neutron emission to P/sub n/=0.48/sub -0.10//sup +0.12/(23 refs).

  8. On-line separation of refractory hafnium and tantalum isotopes at the ISOCELE separator

    CERN Document Server

    Liang, C F; Obert, J; Paris, P; Putaux, J C

    1981-01-01

    By chemical evaporation technique, neutron deficient hafnium nuclei have been on-line separated at the ISOCELE facility, from the isobar rare-earth elements, in the metal-fluoride HfF/sub 3//sup +/ ion form. Half-lives of /sup 162-165/Hf have been measured. Similarly, tantalum has been selectively separated on the TaF/sub 4//sup +/ form. (4 refs) .

  9. On-line multidimensional separation systems for peptide analysis

    NARCIS (Netherlands)

    Stroink, T.

    2005-01-01

    Today, there is an increasing interest in selective and sensitive analysis of proteins and peptides with a relatively high speed. The first chapter of this thesis describes several strategies for the on-line multidimensional analysis of peptides and proteins in biological samples. This overview of

  10. Proceedings of the isotope separator on-line workshop

    Energy Technology Data Exchange (ETDEWEB)

    Chrien, R E [ed.

    1978-07-01

    Separate abstracts were prepared for thirteen of the papers in this volume. The remaining three have already been cited in ERA, and can be located by reference to the entry CONF-771078-- in the Report Number Index. (RWR)

  11. Determination of the isotope shift of $^{190}$Hg by on-line laser spectroscopy

    CERN Document Server

    Duke, C; Kluge, H J; Kremmling, H; Kuhl, Th; Otten, E W

    1977-01-01

    By use of a pulsed tunable dye laser the isotope shift of (T/sub 1/2 /=20 min) /sup 190/Hg in the 6s/sup 2/ /sup 1/S/sub 0/-6s6p/sup 3/P /sub 1/, lambda =2537 AA line has been measured at the on-line mass separator ISOLDE/CERN. The preliminary result relative to /sup 204/Hg is IS/sup 204/190/=31.8(3) GHz. (15 refs).

  12. Chemical investigations of isotope separation on line target units for carbon and nitrogen beams

    CERN Document Server

    Franberg, H; Gäggeler, H W; Köster, U

    2006-01-01

    Radioactive ion beams (RIBs) are of significant interest in a number of applications. Isotope separation on line (ISOL) facilities provide RIB with high beam intensities and good beam quality. An atom that is produced within the ISOL target will first diffuse out from the target material. During the effusion towards the transfer line and into the ion source the many contacts with the surrounding surfaces may cause unacceptable delays in the transport and, hence, losses of the shorter-lived isotopes. We performed systematic chemical investigations of adsorption in a temperature and concentration regime relevant for ISOL targets and ion source units, with regard to CO/sub x/ and NOmaterials are potential construction materials for the above-mentioned areas. Off-line and on-line tests have been performed using a gas thermochromatography setup with radioactive tracers. The experiments were performed at the production of tracers for atmospheric chemistry (PROTRAC) facility at the Paul Schener Institute in Villigen...

  13. Atomic lithium vapor laser isotope separation

    CERN Document Server

    Olivares, I E

    2002-01-01

    An atomic vapor laser isotope separation in lithium was performed using tunable diode lasers. The method permits also the separation of the isotopes between the sup 6 LiD sub 2 and the sup 7 LiD sub 1 lines using a self-made mass separator which includes a magnetic sector and an ion beam designed for lithium. (Author)

  14. Recent great impact by an Isotope Separator On-Line (ISOL) in nuclear and radiochemistry.

    Science.gov (United States)

    Sakama, Minoru

    2016-01-01

    On April 9 2015, the Letter article titled "Measurement of the first ionization potential of lawrencium, element 103" is now published at News and Views on Nature (2015) which has been performed by our remarkably Japanese colleagues of nuclear and radiochemistry at JAEA (Japan Atomic Energy Agency). In this review, the author will state that the isotope separator on-line (ISOL) our regularly used, one of mass separation techniques, with a thermal surface ionization makes possible for determining the ionization potential of lawrencium based on the fruitful fundations of developing the ISOL system until now and also ever studying searches for unknown nuclei and these nuclear decay properties around actinide region in the past 20 years.

  15. Review of techniques for on-line monitoring and inspection of laser welding

    Science.gov (United States)

    Shao, J.; Yan, Y.

    2005-01-01

    Laser welding has been applied to various industries, in particular, automotive, aerospace and microelectronics. However, traditional off-line testing of the welds is costly and inefficient. Therefore, on-line inspection systems with low cost have being developed to increase productivity and maintain high welding quality. This paper presents the applications of acoustic, optical, visual, thermal and ultrasonic techniques and latest development of laser welding monitoring. The advantages and limitations of these techniques are also discussed.

  16. The beam diagnostic instruments in Beijing radioactive ion-beam facilities isotope separator on-line.

    Science.gov (United States)

    Ma, Y; Cui, B; Ma, R; Tang, B; Chen, L; Huang, Q; Jiang, W

    2014-02-01

    The beam diagnostic instruments for Beijing Radioactive Ion-beam Facilities Isotope Separator On-Line are introduced [B. Q. Cui, Z. H. Peng, Y. J. Ma, R. G. Ma, B. Tang, T. Zhang, and W. S. Jiang, Nucl. Instrum. Methods 266, 4113 (2008); T. J. Zhang, X. L. Guan, and B. Q. Cui, in Proceedings of APAC 2004, Gyeongju, Korea, 2004, http://www.jacow.org, p. 267]. For low intensity ion beam [30-300 keV/1 pA-10 μA], the beam profile monitor, the emittance measurement unit, and the analyzing slit will be installed. For the primary proton beam [100 MeV/200 μA], the beam profile scanner will be installed. For identification of the nuclide, a beam identification unit will be installed. The details of prototype of the beam diagnostic units and some experiment results will be described in this article.

  17. On-Line Estimation of Laser-Drilled Hole Depth Using a Machine Vision Method

    Directory of Open Access Journals (Sweden)

    Te-Ying Liao

    2012-07-01

    Full Text Available The paper presents a novel method for monitoring and estimating the depth of a laser-drilled hole using machine vision. Through on-line image acquisition and analysis in laser machining processes, we could simultaneously obtain correlations between the machining processes and analyzed images. Based on the machine vision method, the depths of laser-machined holes could be estimated in real time. Therefore, a low cost on-line inspection system is developed to increase productivity. All of the processing work was performed in air under standard atmospheric conditions and gas assist was used. A correlation between the cumulative size of the laser-induced plasma region and the depth of the hole is presented. The result indicates that the estimated depths of the laser-drilled holes were a linear function of the cumulative plasma size, with a high degree of confidence. This research provides a novel machine vision-based method for estimating the depths of laser-drilled holes in real time.

  18. Application of laser ultrasonic method for on-line monitoring of friction stir spot welding process.

    Science.gov (United States)

    Zhang, Kuanshuang; Zhou, Zhenggan; Zhou, Jianghua

    2015-09-01

    Application of a laser ultrasonic method is developed for on-line monitoring of the friction stir spot welding (FSSW) process. Based on the technology of FSSW, laser-generated ultrasonic waves in a good weld and nonweld area are simulated by a finite element method. The reflected and transmitted waves are analyzed to disclose the properties of the welded interface. The noncontact-laser ultrasonic-inspection system was established to verify the numerical results. The reflected waves in the good-weld and nonweld area can be distinguished by time-of-flight. The transmitted waves evidently attenuate in the nonweld area in contrast to signal amplitude in the good weld area because of interfacial impedance difference. Laser ultrasonic C-scan images can sufficiently evaluate the intrinsic character of the weld area in comparison with traditional water-immersion ultrasonic testing results. The research results confirm that laser ultrasonics would be an effective method to realize the characterization of FSSW defects.

  19. On-line separation of native proteins by two-dimensional liquid chromatography using a single column.

    Science.gov (United States)

    Geng, Xindu; Ke, Congyu; Chen, Gang; Liu, Peng; Wang, Fei; Zhang, Huiqiang; Sun, Xuan

    2009-04-17

    This paper reports the on-line separation of native (N) proteins by two-dimensional liquid chromatography (2D-LC) using a single column with one phase (called 2D column). The 2D column exhibits excellent resolution, selectivity, and retention of proteins in the N state and functions in two retention modes--hydrophobic interaction chromatography (HIC) and weak-cation exchange chromatography (WCX). We describe a new approach to on-line buffer exchange and collection of fractions from the first retention mode and their quantitative re-injection into the same column, followed by re-separation in the second retention mode. Thus, liquid chromatography in a closed system and in an on-line manner could be successfully carried out. This method was termed on-line protein separation by 2D-LC using only a single column (on-line 2D-LC-1C). The applicability of this method was experimentally demonstrated using standard proteins and a human serum sample. The total hypothetical maximum possible peak capacity n(c,total) and total sample peak capacity n(c,total)(*) of the 2D column were 329 and 199, respectively. By comparison against several popular commercially available columns, it was found that the 2D column had not only comparable resolution and better selectivity but also some unique characteristics. This 2D-LC-1C method could be applied to the fast purification of intact proteins in the N state, such protein drugs from natural products, and recombinant proteins and also for the fast pre-fractionation of intact proteins in the "top-down" MS strategy in proteomics.

  20. Laser isotope separation and proliferation risks

    Energy Technology Data Exchange (ETDEWEB)

    Fuss, Werner

    2015-02-15

    There is an ongoing discussion on the proliferation danger of laser enrichment of uranium by the Silex process. Here this risk is compared to that of other processes, in particular centrifuges. The two methods need a similar size of the plant for a comparable production rate (in separative work units per year) and the time and costs for their construction do not differ much. This conclusion from published material does not depend on technical details of Silex. But enough details are known to allow for additional conclusions: Whereas the selectivity (enrichment factor) in the Silex process seems higher, the energy consumption is probably larger. Due to the laser's repetition rate being insufficient for the molecular beam, the method has probably a low depletion factor; this is a serious disadvantage for cascading for high enrichment such as for bomb uranium, although it may be acceptable for low enrichment without cascading for reactor purposes.

  1. Ion source development for the JAERI on-line isotope separator

    CERN Document Server

    Ichikawa, S; Matsuda, M; Tsukada, K; Asai, M; Nagame, Y; Jeong, S C; Katayama, I

    2003-01-01

    In accordance with the JAERI-KEK joint radioactive nuclear beam (RNB) project, we have installed a forced electron beam induced arc discharge (FEBIAD) type integrated-target-ion source in the JAERI-ISOL to produce heavy neutron-rich RNBs with particle-induced fission of sup 2 sup 3 sup 8 U. In the present ion source, a 2.6-g sup 2 sup 3 sup 8 UC sub 2 target is directly attached to a plasma chamber. RNBs of sup 8 Li, sup 1 sup 8 F and sup 2 sup 0 F are also planned to be used for the study of thermal diffusion in materials in the joint project. Release profiles of sup 7 Li have been studied using a cavity type thermal ion source. For mass-separation of F atoms, the molecular ion formations have been examined using the FEBIAD ion source.

  2. First application of the Laser Ion Source and Trap (LIST) for on-line experiments at ISOLDE

    CERN Document Server

    Fink, D A; Imai, N; Blaum, K; Rothe, S; Sjoedin, M; Rossel, R E; Kron, T; Marsh, B A; Richter, S D; Cocolios, T E; Lecesne, N; Ghys, L; Pauwels, D; Rapisarda, E; Seliverstov, M D; Stora, T; Ramos, J P; Mendonca, T M; Fedosseev, V N; Lynch, K M; Wendt, K D A; Gottberg, A; Flanagan, K T; Van Beveren, C; Bastin, B; Fedorov, D V

    2013-01-01

    The Laser Ion Source and Trap (LIST) provides a new mode of operation for the resonance ionization laser ion source (RILIS) at ISOLDE/CERN, reducing the amount of surface-ionized isobaric contaminants by up to four orders of magnitude. After the first successful on-line test at ISOLDE in 2011 the LIST was further improved in terms of efficiency, selectivity, and reliability through several off-line tests at Mainz University and at ISOLDE. In September 2012, the first on-line physics experiments to use the LIST took place at ISOLDE. The measurements of the improved LIST indicate more than a twofold increase in efficiency compared to the LIST of the 2011 run. The suppression of surface-ionized francium contaminants has enabled the first in-source laser spectroscopy of Po-217 and Po-219. (C) 2013 Elsevier B.V. All rights reserved.

  3. First application of the Laser Ion Source and Trap (LIST) for on-line experiments at ISOLDE

    Science.gov (United States)

    Fink, D. A.; Richter, S. D.; Bastin, B.; Blaum, K.; Catherall, R.; Cocolios, T. E.; Fedorov, D. V.; Fedosseev, V. N.; Flanagan, K. T.; Ghys, L.; Gottberg, A.; Imai, N.; Kron, T.; Lecesne, N.; Lynch, K. M.; Marsh, B. A.; Mendonca, T. M.; Pauwels, D.; Rapisarda, E.; Ramos, J. P.; Rossel, R. E.; Rothe, S.; Seliverstov, M. D.; Sjödin, M.; Stora, T.; Van Beveren, C.; Wendt, K. D. A.

    2013-12-01

    The Laser Ion Source and Trap (LIST) provides a new mode of operation for the resonance ionization laser ion source (RILIS) at ISOLDE/CERN, reducing the amount of surface-ionized isobaric contaminants by up to four orders of magnitude. After the first successful on-line test at ISOLDE in 2011 the LIST was further improved in terms of efficiency, selectivity, and reliability through several off-line tests at Mainz University and at ISOLDE. In September 2012, the first on-line physics experiments to use the LIST took place at ISOLDE. The measurements of the improved LIST indicate more than a twofold increase in efficiency compared to the LIST of the 2011 run. The suppression of surface-ionized francium contaminants has enabled the first in-source laser spectroscopy of 217Po and 219Po.

  4. On-line coupling of packed capillary electrochromatography with coordination ion spray-mass spectrometry for the separation of enantiomers.

    Science.gov (United States)

    von Brocke, Alexander; Wistuba, Dorothee; Gfrörer, Petra; Stahl, Mark; Schurig, Volker; Bayer, Ernst

    2002-09-01

    Pressure-supported packed capillary electrochromatography (CEC) and packed capillary high-performance liquid chromatography (pHPLC) have been coupled on-line to electrospray ionization-mass spectrometry (ESI-MS) and coordination ion spray-mass spectrometry (CIS-MS). Separation of enantiomers of barbiturates and chlorinated alkyl phenoxypropanoates were performed on a permethylated beta-cyclodextrin stationary phase by pressure-supported CEC. For on-line detection with ESI- and CIS-MS, a modified sheath-liquid interface was used. CIS-MS is a universal, novel ionization technique which improves the selectivity as well as the sensitivity. Charged complexes were formed through the addition of central complexing ions such as silver(I), cobalt(II), copper(II), and lithium(I) to the sheath flow. Advantages of CIS-MS detection compared to the ESI-MS mode are discussed. In the CIS-MS mode, increased sensitivity and high selectivity was attained through different possibilities of complexation. The superiority of pressure-supported CEC compared to pHPLC in the hyphenation with CIS-MS is demonstrated.

  5. First application of the Laser Ion Source and Trap (LIST) for on-line experiments at ISOLDE

    Energy Technology Data Exchange (ETDEWEB)

    Fink, D.A., E-mail: daniel.fink@cern.ch [CERN, 1211 Geneva 23 (Switzerland); Max-Planck-Institut für Kernphysik, 69117 Heidelberg (Germany); Fakultät für Physik und Astronomie, Ruprecht-Karls Universität, 69120 Heidelberg (Germany); Richter, S.D. [Insitut für Physik, Johannes Gutenberg-Universität, 55122 Mainz (Germany); Bastin, B. [Grand Accélérateur National d’Ions Lourds (GANIL), Bd Henri Becquerel, F-14076 Caen (France); Blaum, K. [Max-Planck-Institut für Kernphysik, 69117 Heidelberg (Germany); Catherall, R. [CERN, 1211 Geneva 23 (Switzerland); Cocolios, T.E. [CERN, 1211 Geneva 23 (Switzerland); University of Manchester, Manchester M13 9PL (United Kingdom); Fedorov, D.V. [PNPI NRC KI, 188300 Orlova Roscha, Gatchina (Russian Federation); Fedosseev, V.N. [CERN, 1211 Geneva 23 (Switzerland); Flanagan, K.T. [University of Manchester, Manchester M13 9PL (United Kingdom); Ghys, L. [IKS KU Leuven, Celestijnenlkn 200D, B-3001 Leuven (Belgium); Belgian Nuclear Research Centre SCK-CEN, Boeretang 200, B-2400 Mol (Belgium); Gottberg, A. [CERN, 1211 Geneva 23 (Switzerland); Instituto de Estructura de la Materia, CSIC, 28006 Madrid (Spain); Imai, N. [High Energy Accelerator Research Organization (KEK), Oho 1-1, Tsukuba, Ibaraki 305-0801 (Japan); Kron, T. [Insitut für Physik, Johannes Gutenberg-Universität, 55122 Mainz (Germany); Lecesne, N. [Grand Accélérateur National d’Ions Lourds (GANIL), Bd Henri Becquerel, F-14076 Caen (France); and others

    2013-12-15

    Highlights: • First application of LIST target for on-line experiments at ISOLDE. • Reliable operation of LIST together with a strongly outgassing UCx target. • Suppression of isobaric contaminants by a factor of more than 10000 achieved. • Laser ionization efficiency of LIST improved by factor 2.5 compared to 2011 LIST. -- Abstract: The Laser Ion Source and Trap (LIST) provides a new mode of operation for the resonance ionization laser ion source (RILIS) at ISOLDE/CERN, reducing the amount of surface-ionized isobaric contaminants by up to four orders of magnitude. After the first successful on-line test at ISOLDE in 2011 the LIST was further improved in terms of efficiency, selectivity, and reliability through several off-line tests at Mainz University and at ISOLDE. In September 2012, the first on-line physics experiments to use the LIST took place at ISOLDE. The measurements of the improved LIST indicate more than a twofold increase in efficiency compared to the LIST of the 2011 run. The suppression of surface-ionized francium contaminants has enabled the first in-source laser spectroscopy of {sup 217}Po and {sup 219}Po.

  6. On-line implementation and first operation of the Laser Ion Source and Trap at ISOLDE/CERN

    Energy Technology Data Exchange (ETDEWEB)

    Fink, D.A., E-mail: daniel.fink@cern.ch [CERN, 1211 Geneva 23 (Switzerland); Max-Planck-Institut für Kernphysik, 69117 Heidelberg (Germany); Fakultät für Physik und Astronomie, Ruprecht-Karls-Universität, 69120 Heidelberg (Germany); Richter, S.D. [Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Blaum, K. [Max-Planck-Institut für Kernphysik, 69117 Heidelberg (Germany); Catherall, R.; Crepieux, B.; Fedosseev, V.N. [CERN, 1211 Geneva 23 (Switzerland); Gottberg, A. [CERN, 1211 Geneva 23 (Switzerland); Instituto de Estructura de la Materia, CSIC, 28006 Madrid (Spain); Kron, T. [Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Marsh, B.A. [CERN, 1211 Geneva 23 (Switzerland); Mattolat, C.; Raeder, S. [Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Rossel, R.E. [CERN, 1211 Geneva 23 (Switzerland); Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Faculty of Design, Computer Science and Media, Hochschule RheinMain, 65197 Wiesbaden (Germany); Rothe, S. [CERN, 1211 Geneva 23 (Switzerland); Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Schwellnus, F. [Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); and others

    2015-02-01

    Highlights: • The Laser Ion Source and Trap (LIST) was successfully operated on-line at ISOLDE. • LIST showed no signs of degradation after 48 h of intense proton irradiation. • Transmission, selectivity, efficiency, time structure were extensively characterized. • Suppression factor for surface-ionized isobaric contaminants is more than 10{sup 3}–10{sup 4}. • Loss in LIST efficiency compared to RILIS operation is only a factor of 20. - Abstract: At radioactive ion beam facilities like ISOLDE at CERN, a high purity of the element of interest in the ion beam is essential for most experiments on exotic nuclei. Due to its unique combination of high ionization efficiency and ultimate elemental selectivity, the Resonance Ionization Laser Ion Source, RILIS, has become the most frequently used ion source at ISOLDE and at the majority of similar facilities worldwide. However, isobaric contamination predominantly stemming from unspecific surface ionization may still introduce severe limitations. By applying the highly selective resonance ionization technique inside a radio-frequency quadrupole ion guide structure, the novel approach of the Laser Ion Source and Trap, LIST, suppresses surface ionized isobaric contaminants by an electrostatic repelling potential. Following extensive feasibility studies and off-line tests, the LIST device has been adapted and refined to match the stringent operational constraints and to survive the hostile environment of the ISOLDE front-end region enclosing the highly radioactive nuclear reaction target. The LIST operation was successfully demonstrated for the first time on-line at ISOLDE during two experiments, attesting its suitability for radioactive isotope production under routine conditions. Data of these on-line characterization measurements confirm a suppression of surface-ionized isobars by more than a factor of 1000 in accordance to off-line studies that were carried out for the preparation of the on-line experiments

  7. Lasers in dentistry: separating science from hype.

    Science.gov (United States)

    Dederich, Douglas N; Bushick, Ronald D

    2004-02-01

    During the last two decades, much has been written in both the scientific literature and the popular press about lasers and their use in the dental office. Both soft- and hard-tissue applications have been discussed, including frenectomy, gingival contouring, caries removal and bleaching. Almost one-third of patients surveyed by the American Dental Association in the late 1990s thought it was very important that their dentists have lasers, which could put pressure on dentists to invest in this tool to attract patients. The authors describe the different types of dental lasers and examine the science behind their applications in dentistry. Although lasers do have legitimate uses in dentistry, they do not take the place of any of the more conventional tools in the dentist's armamentarium. Before investing in a laser, dentists should fully understand the differences between the various types, including what the scientific literature says about their applications.

  8. The Eurisol report. A feasibility study for a European isotope-separation-on-line radioactive ion beam facility

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-12-01

    The Eurisol project aims at a preliminary design study of the next-generation European isotope separation on-line (ISOL) radioactive ion beam (RIB) facility. In this document, the scientific case of high-intensity RIBs using the ISOL method is first summarised, more details being given in appendix A. It includes: 1) the study of atomic nuclei under extreme and so-far unexplored conditions of composition (i.e. as a function of the numbers of protons and neutrons, or the so-called isospin), rotational angular velocity (or spin), density and temperature, 2) the investigation of the nucleosynthesis of heavy elements in the Universe, an important part of nuclear astrophysics, 3) a study of the properties of the fundamental interactions which govern the properties of the universe, and in particular of the violation of some of their symmetries, 4) potential applications of RIBs in solid-state physics and in nuclear medicine, for example, where completely new fields could be opened up by the availability of high-intensity RIBs produced by the ISOL method. The proposed Eurisol facility is then presented, with particular emphasis on its main components: the driver accelerator, the target/ion-source assembly, the mass-selection system and post-accelerator, and the required scientific instrumentation. Special details of these components are given in appendices B to E, respectively. The estimates of the costs of the Eurisol, construction and running costs, have been performed in as much details as is presently possible. The total capital cost (installation manpower cost included) of the project is estimated to be of the order of 630 million Euros within 20%. In general, experience has shown that operational costs per annum for large accelerator facilities are about 10% of the capital cost. (A.C.)

  9. Separation of four flavonoids from Rhodiola rosea by on-line combination of sample preparation and counter-current chromatography.

    Science.gov (United States)

    Ma, Chaoyang; Hu, Liming; Fu, Qianyun; Gu, Xiaohong; Tao, Guanjun; Wang, Hongxin

    2013-09-06

    Purification of four flavonoids from Rhodiola rosea was developed by on-line combination of sample preparation and counter-current chromatography (CCC). Flavonoid sample was prepared by dynamic ultrasonic-assisted and solid-phase extraction using ion liquids as extractant. The preparation conditions were optimized by D-optimal design as follows: 2mol/L of 1-ethyl-3-methylimidazolium bromide concentration, 360W of ultrasonic power, 1.5mL/min of flow rate, 35min of extraction time and 0.5mL (absorbent) per g (material) of absorbent amount. The prepared sample solution (20mL) was loaded and injected directly into CCC column for final separation. As a result, four flavonoids, herbacetin-3-O-β-d-glucopyranosyl-7-O-α-l-rhamnopyranoside 1 (40.1mg), kaempferol-3-O-β-d-glucopyranosyl-7-O-α-l-rhamn-opyranoside 2 (4.6mg), kaempferol 3-O-β-d-glucopyranoside-(2→1)-β-d-xylopyranoside 3 (20.2mg) and herbacetin-8-O-β-d-glucopyranoside 4 (22.5mg), were obtained from 20g of R. rosea material using ethyl acetate-n-butanol-H2O as solvent system at a ratio of 4:1:5 by CCC. Their structures were identified by ESI-MS/MS, NMR methods. Their purities determined by UPLC were 98.5%, 95.4%, 98.1% and 97.5%, respectively. Kaempferol-3-O-β-d-glucopyranosyl-7-O-α-l-rhamnopyranoside 2 and herbacetin-8-O-β-d-glucopyrano-side 4 were isolated for first time from R. rosea. The purification method was simple, efficient and evaded tedious sample preparation process. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Pharmacokinetics of ethylene in man by on-line laser photoacoustic detection.

    NARCIS (Netherlands)

    Berkelmans, H.W.; Moeskops, B.W.M.; Bominaar, J.; Scheepers, P.T.J.; Harren, F.J.M.

    2003-01-01

    The pharmacokinetics of ethylene are determined using laser-based photoacoustic detection and a closed chamber setup. Concentration-time data are analyzed using a two-compartment and a physiologically based pharmacokinetic (PBPK) model. Endogenous production was 92 +/- 13 pmol/h/kg for the

  11. Continuous, on-line DNA sequencing using a versatile infrared laser scanner/electrophoresis apparatus.

    Science.gov (United States)

    Middendorf, L R; Bruce, J C; Bruce, R C; Eckles, R D; Grone, D L; Roemer, S C; Sloniker, G D; Steffens, D L; Sutter, S L; Brumbaugh, J A

    1992-08-01

    A new apparatus for continuously detecting fluorescently labeled DNA fragments is based on infrared fluorescence technology. This technology combines state-of-the-art developments in chemistry, laser technology, and detection, while achieving improved reliability, sensitivity, and flexibility for applications including DNA sequencing. DNA molecules labeled with a novel infrared fluorophore are detected during electrophoresis using a scanning infrared fluorescence microscope. The microscope consists of a laser diode for exciting the fluorophore and a silicon avalanche photodiode for detecting the infrared emission. Optimum conditions for detection and throughput are obtained by adjusting electrophoresis, scanning and imaging parameters. Typical DNA sequencing runs (test templates) allow identification of over 500 bases per sample with greater than 99% accuracy.

  12. On-line computer system to minimize laser injuries during surgery: preliminary system layout and proposal of the key features.

    Science.gov (United States)

    Canestri, F

    1999-01-01

    The aim of this paper is to investigate some new user interface ideas and related application packages which aim to improve the degree of safety in an operating room during surgical operations in which an invasive laser beam is deployed. The overall value of the proposition is that a means is provided which ensures the successful completion of the surgical case while minimizing the risk of thermal and mechanical injuries to healthy tissues adjacent to the surgical field. According to surgeons operating with a variety of CO2 lasers available at both the National Cancer Institute in Milan, Italy, and the Sackler School of Medicine, Tel Aviv University, Israel, each laser device presents different cutting and coagulation properties. In order to identify which 'ideal' procedure might corroborate the subjective impression of each surgeon and also to provide one common tool to ensure procedures with a high level of safety, the author has worked for several months with surgeons and technicians of both Institutions to define the general design of a new on-line surgical operation planning and design system to be used during the pre-operative briefing activities and also as a consultation tool during operation. This software package will be developed and tested on both 'C' and FORTRAN compilers running on a commercially available PC which is driving a continuous wave (CW) CO2 laser device via its Instrument Bus interface. The present proposal describes the details of a software package called LCA (Laser-beam Controller and Adviser) which performs several controls in parallel on the key output parameters of a laser beam device during its utilization in delicate surgical operations. The required performances of this device needed during a given surgical operation are pre-simulated and compared against the well-known safety limits, which are stored in the computer's mass storage. If the surgeon's decision about the laser device set-up are considered to be too close to the

  13. Phase-coherent optical pulse synthesis from separate femtosecond lasers.

    Science.gov (United States)

    Shelton, R K; Ma, L S; Kapteyn, H C; Murnane, M M; Hall, J L; Ye, J

    2001-08-17

    We generated a coherently synthesized optical pulse from two independent mode-locked femtosecond lasers, providing a route to extend the coherent bandwidth available for ultrafast science. The two separate lasers (one centered at 760 nanometers wavelength, the other at 810 nanometers) are tightly synchronized and phase-locked. Coherence between the two lasers is demonstrated via spectral interferometry and second-order field cross-correlation. Measurements reveal a coherently synthesized pulse that has a temporally narrower second-order autocorrelation width and that exhibits a larger amplitude than the individual laser outputs. This work represents a new and flexible approach to the synthesis of coherent light.

  14. Development of an on-line mixed-mode gel liquid chromatography×reversed phase liquid chromatography method for separation of water extract from Flos Carthami.

    Science.gov (United States)

    Wang, Yu-Qing; Tang, Xu; Li, Jia-Fu; Wu, Yun-Long; Sun, Yu-Ying; Fang, Mei-Juan; Wu, Zhen; Wang, Xiu-Min; Qiu, Ying-Kun

    2017-10-13

    A novel on-line comprehensive two-dimensional liquid chromatography (2D-LC) method by coupling mixed-mode gel liquid chromatography (MMG-LC) with reversed phase liquid chromatography (RPLC) was developed. A mixture of 17 reference compounds was used to study the separation mechanism. A crude water extract of Flos Carthami was applied to evaluate the performance of the novel 2D-LC system. In the first dimension, the extract was eluted with a gradient of water/methanol over a cross-linked dextran gel Sephadex LH-20 column. Meanwhile, the advantages of size exclusion, reversed phase partition and adsorption separation mechanism were exploited before further on-line reversed phase purification on the second dimension. This novel on-line mixed-mode Sephadex LH-20×RPLC method provided higher peak resolution, sample processing ability (2.5mg) and better orthogonality (72.9%) versus RPLC×RPLC and hydrophilic interaction liquid chromatography (HILIC)×RPLC. To the best of our knowledge, this is the first report of a mixed-mode Sephadex LH-20×RPLC separation method with successful applications in on-line mode, which might be beneficial for harvesting targets from complicated medicinal plants. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Master on Photonics and Laser Technologies: on-line teaching experience

    Science.gov (United States)

    Paredes, Ángel; Michinel, Humberto; Salgueiro, José R.; Vázquez-Dorrío, Benito; Yáñez, Armando; Arines, Justo; Flores-Arias, M. Teresa

    2014-07-01

    The Galician Universitary System (SUG) in the framework of the European studies under the Bologna process presents a huge number of Masters courses. In this work we present the teaching framework of the Science Masters on "Photonics and Laser Technologies", coordinated by the University of Vigo (UVigo) and involving the three Universities of Galicia: University of Vigo (UVigo), University of Santiago de Compostela (USC) and University of Coruña (UdC). The aim of this work is to show how teaching at this Masters is carried out using an online platform so that the whole expertise of all the three Universities can be properly exploited and the geographic dispersion of lecturers and students overcame. The used platform permits the students to attend the lessons from their own Universities without wasting time and money on traveling. Besides, each lecturer can teach from his/her own University, allowing the combination of this activity with other professional and scientific duties. Thanks to this tool, the Masters could host students that followed the lessons from other different countries. The platform has been used for lectures, seminar classes, examinations, conferences and coordination activities between teachers and students.

  16. First laser ions at an off-line mass separator of the ISAC facility at TRIUMF

    CERN Document Server

    Rauth, C; Horn, R; Lassen, J; Bricault, P; Wendt, K; 10.1016/j.nimb.2003.08.029

    2004-01-01

    For efficient and in particular for selective production of radioactive ion beams at on-line mass separator facilities the technique of resonance ionization laser ion sources (RILlS) has become the most powerful tool. In facilities like ISOLDE at CERN they nowadays represent the most commonly used type of ion source for rare short-lived isotopes, delivering highest suppression of isobaric contaminations. For a first off-line demonstration preparing the development and installation of such a laser ion source at the new ISAC facility at TRIUMF in Vancouver (Canada), an all solid state laser system developed at the University of Mainz (Germany), was transferred and tested there at an off-line test separator. The laser system consists of three tunable titanium:sapphire lasers with a repetition rate of 12 kHz, pulse length of ~30 ns, up to 2.5 W output power in the infrared to red spectral region and features additional frequency doubling units. With this system first RILIS studies were performed in a number of el...

  17. Microfluidic setup for on-line SERS monitoring using laser induced nanoparticle spots as SERS active substrate

    Directory of Open Access Journals (Sweden)

    Oana-M. Buja

    2017-01-01

    Full Text Available A microfluidic setup which enables on-line monitoring of residues of malachite green (MG using surface-enhanced Raman scattering (SERS is reported. The SERS active substrate was prepared via laser induced synthesis of silver or gold nanoparticles spot on the bottom of a 200 μm inner dimension glass capillary, by focusing the laser beam during a continuous flow of a mixture of silver nitrate or gold chloride and sodium citrate. The described microfluidic setup enables within a few minutes the monitoring of several processes: the synthesis of the SERS active spot, MG adsorption to the metal surface, detection of the analyte when saturation of the SERS signal is reached, and finally, the desorption of MG from the spot. Moreover, after MG complete desorption, the regeneration of the SERS active spot was achieved. The detection of MG was possible down to 10−7 M concentration with a good reproducibility when using silver or gold spots as SERS substrate.

  18. Modelling of multifrequency IRMPD for laser isotope separation

    Indian Academy of Sciences (India)

    Unknown

    6Li, 10B, 13C, 18O, 33S etc., some in connection with energy production and others as tracers in analytical ... dissociation per pulse is necessary to attain high separation factors and high fractional yields at the same time ... A commercial CO2 laser (Lumonics TEA103-2) was used for irradiation experiments. The 2⋅2 m long ...

  19. On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

    Energy Technology Data Exchange (ETDEWEB)

    Fernández, Beatriz, E-mail: fernandezbeatriz@uniovi.es [Department of Physical and Analytical Chemistry, Faculty of Chemistry, University of Oviedo, Julian Clavería, 8, Oviedo 33006 (Spain); Rodríguez-González, Pablo; García Alonso, J. Ignacio [Department of Physical and Analytical Chemistry, Faculty of Chemistry, University of Oviedo, Julian Clavería, 8, Oviedo 33006 (Spain); Malherbe, Julien [Chemical Sciences Division, Material Measurement Laboratory, National Institute of Standards and Technology, 100 Bureau Drive, Stop 8391, Gaithersburg, MA 20899 (United States); García-Fonseca, Sergio [ISC Science–Innovative Solutions in Chemistry, Oviedo (Spain); Pereiro, Rosario; Sanz-Medel, Alfredo [Department of Physical and Analytical Chemistry, Faculty of Chemistry, University of Oviedo, Julian Clavería, 8, Oviedo 33006 (Spain)

    2014-12-03

    Graphical abstract: Development and validation of a new on-line double IDMS methodology to achieve an accurate, precise, and time-effective strategy for direct determination of trace elements in solid samples by LA-ICP-MS. - Highlights: • Development of a double IDMS strategy for direct solid analysis by LA-ICP-MS. • The proposed method requires the sequential analysis of the sample and a standard. • The previous characterization of the spike solution is not required in double IDMS. • Quantitative bulk analysis of Sr, Rb and Pb were performed in silicate glasses and powdered samples. • Powdered samples were analyzed as pressed pellets and glasses prepared by fusion. - Abstract: We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the

  20. Implementation of a MR-ToF isobar separator at the on-line mass spectrometer ISOLTRAP

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Robert; Breitenfeldt, Martin; Marx, Gerrit; Rosenbusch, Marco; Schweikhard, Lutz [University Greifswald (Germany); Blaum, Klaus; Borgmann, Christopher; Fink, Daniel; Kreim, Susanne [Max-Planck-Institut for Nuclear Physics, Heidelberg (Germany); Herlert, Alexander; Kowalska, Magdalena [CERN, Geneva (Switzerland); Lunney, Dave; Naimi, Sarah [CSNSM, Orsay (France)

    2010-07-01

    A multi-reflection time-of-flight mass separator (MR-ToF-MS) was installed at the ISOLTRAP/CERN mass spectrometer for isobaric purification of rare isotope ensembles as a preparation for precision mass determinations. The MR-ToF-MS consists of two ion optical mirrors between which ions are oscillating and are separated by their mass-over-charge ratio m/q. Flight paths of several hundreds of meters are folded to an apparatus length of less than one meter. Previous tests resulted in a mass resolving power of up to m/{delta}m{approx}10{sup 5} and the separation was demonstrated for the isobaric ions CO{sup +} and N{sub 2}{sup +}. In combination with a Bradbury-Nielsen beamgate, the MR-ToF-MS will support the existing purification methods of the setup to gain access to nuclides produced with high isobaric contamination yields at the ISOLDE facility. The modified ISOLTRAP setup and its performance are presented.

  1. On-line detection of heavy metals and brominated flame retardants in technical polymers with laser-induced breakdown spectrometry.

    Science.gov (United States)

    Stepputat, Michael; Noll, Reinhard

    2003-10-20

    The use of laser-induced breakdown spectrometry (LIBS) for the analysis of heavy metals and brominated flame retardants in end-of-life waste electric and electronic equipment (EOL-WEEE) pieces is investigated. Single- and double-pulse plasma excitation as well as the influence of detection parameters is studied to yield a parameter field with improved sensitivity and limits of detection. A LIBS analyzer was set up as an on-line measuring unit to detect heavy metals and brominated flame retardants in moving EOL-WEEE pieces in an automatic sorting line. An autofocusing unit with an adjustment range of 50 mm was incorporated to permit measurements of objects that pass by a LIBS analyzer with their surfaces at various distances from it. Tests with EOL-WEEE monitor housings on the conveyor belt of a pilot sorting system successfully demonstrated the capability of the LIBS analyzer to quantify the concentration of hazardous elements in real waste EOL-WEEE pieces.

  2. Laser photodissociation and spectroscopy of mass-separated biomolecular ions

    CERN Document Server

    Polfer, Nicolas C

    2014-01-01

    This lecture notes book presents how enhanced structural information of biomolecular ions can be obtained from interaction with photons of specific frequency - laser light. The methods described in the book ""Laser photodissociation and spectroscopy of mass-separated biomolecular ions"" make use of the fact that the discrete energy and fast time scale of photoexcitation can provide more control in ion activation. This activation is the crucial process producing structure-informative product ions that cannot be generated with more conventional heating methods, such as collisional activation. Th

  3. A preliminary study for the production of high specific activity radionuclides for nuclear medicine obtained with the isotope separation on line technique.

    Science.gov (United States)

    Borgna, F; Ballan, M; Corradetti, S; Vettorato, E; Monetti, A; Rossignoli, M; Manzolaro, M; Scarpa, D; Mazzi, U; Realdon, N; Andrighetto, A

    2017-09-01

    Radiopharmaceuticals represent a fundamental tool for nuclear medicine procedures, both for diagnostic and therapeutic purposes. The present work aims to explore the Isotope Separation On-Line (ISOL) technique for the production of carrier-free radionuclides for nuclear medicine at SPES, a nuclear physics facility under construction at INFN-LNL. Stable ion beams of strontium, yttrium and iodine were produced using the SPES test bench (Front-End) to simulate the production of 89Sr, 90Y, 125I and 131I and collected with good efficiency on suitable targets. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Application and recovery of ionic liquids in the preparative separation of four flavonoids from Rhodiola rosea by on-line three-dimensional liquid chromatography.

    Science.gov (United States)

    Ma, Shufeng; Hu, Liming; Ma, Chaoyang; Lv, Wenping; Wang, Hongxin

    2014-09-01

    A novel on-line three-dimensional liquid chromatography method was developed to separate four main flavonoids from Rhodiola rosea. Ethyl acetate/0.5 mol/L ionic liquid 1-butyl-3-methylimidazolium chloride aqueous solution was selected as the solvent system. In the first-dimension separation, the target flavonoids were entrapped and subsequently desorbed into the second-dimension high-speed countercurrent chromatographic column for separation. In the third-dimension chromatography, the residual ionic liquid in the four separated flavonoids was removed and the used ionic liquid was recovered. As a result, 35.1 mg of compound 1, 20.4 mg of compound 2, 8.5 mg of compound 3, and 10.6 mg of compound 4 were obtained from 1.53 g R. rosea extract. They were identified as rhodiosin, rhodionin, herbacetin, and kaempferol, respectively. The recovery of ionic liquid reached 99.1% of the initial amount. The results showed that this method is a powerful technology for the separation of R. rosea flavonoids and that the ionic-liquid-based solvent system has advantages over traditional solvent systems in renewable and environmentally friendly properties. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. This picture was taken in 1967 during the first test of the Isotope On-Line Separator (ISOLDE) installation at the 600 MeV CERN Synchro Cyclotron.

    CERN Multimedia

    CERN PhotoLab

    1967-01-01

    When ISOLDE began operation, it was unique in the world. It used a new technique to overcome the problem of rapidly separating interesting atoms from the rest of the nuclear target. Through a combination of chemical and electromagnetic methods the different isotopes were separated and converted into an ion beam made of just one isotope. On-line production of radioactive nuclei, in this way, offered many new opportunities for physicists as it allowed them to perform previously impossible experiments on short-lived nuclei. ISOLDE has become one of CERN's major installations and it supports a broad scientific programme by providing beams to different experiments. The techniques developed at ISOLDE have opened up a new field of radioactive ion-beam accelerators, both at CERN and worldwide.

  6. Field-amplified on-line sample stacking for separation and determination of cimaterol, clenbuterol and salbutamol using capillary electrophoresis.

    Science.gov (United States)

    Shi, Yanfang; Huang, Ying; Duan, Jianping; Chen, Hongqing; Chen, Guonan

    2006-08-25

    A capillary electrophoresis method, using field-amplified sample injection (FASI), was developed for separation and determination of some beta 2-agonists, such as cimaterol, clenbuterol and salbutamol. The optimum conditions for this system had been investigated in detail. The precision of the migration time, peak height and accuracy were determined in both intra-day (n = 5) and inter-day (n = 15) assays. Under the optimum conditions, the detection limits (defined as S/N = 3) of this method were found to be lower than 2.0 ng/mL for all of these three beta 2-agonists, which were much lower than that of the conventional electro-migration injection method, the enhancement factors were greatly improved to be 30-40-fold. Such lower detection limit lets this method to be suitable for determination of above-mentioned beta 2-agonists in the urine sample. The mean recoveries in urine were higher than 96.2%, 95.6% and 95.3% for cimaterol, clenbuterol and salbutamol, respectively, with relative standard deviations lower than 3.5%.

  7. On-line solid-phase separation/preconcentration for the determination of copper in urine by flame atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Saçmacı, Şerife, E-mail: sacmaci@erciyes.edu.tr; Şahan, Serkan; Şahin, Uğur; Kartal, Şenol; Ülgen, Ahmet

    2014-11-01

    A new on-line separation/preconcentration system was developed for the determination of Cu(II) ions by flame atomic absorption spectrometry in urine samples. A newly synthesized chelating resin, by anchoring eriochrome blue black R reagent to Amberlite XAD-16 resin, was used as a packing material for the selective separation/preconcentration of Cu(II) ions. The influence of the parameters on the determination of Cu(II) ions such as pH of sample solution, amount of the resin, eluent type, interfering ions and flow variables was studied. The detection limit of the method was 1.0 μg L{sup −1} while precision was 2.3% (n = 15) at 50 μg L{sup −1} Cu(II) level. The adsorption capacity of the resin was 217 μg g{sup −1} Cu(II). The accuracy of the method was proven using TMDA-64 standard lake water and synthetic urine sample. The developed method has been applied successfully to the determination of copper in urine with satisfactory results. - Highlights: • The method was applied to the urine samples taken from Wilson’s patients. • The on-line determination of copper and satisfactory results were obtained. • All processes are made automatically by the system itself in the proposed method.

  8. On-line SPE-UHPLC method using fused core columns for extraction and separation of nine illegal dyes in chilli-containing spices.

    Science.gov (United States)

    Khalikova, Maria A; Satínský, Dalibor; Smidrkalová, Tereza; Solich, Petr

    2014-12-01

    The presented work describes the development of a simple, fast and effective on-line SPE-UHPLC-UV/vis method using fused core particle columns for extraction, separation and quantitative analysis of the nine illegal dyes, most frequently found in chilli-containing spices. The red dyes Sudan I-IV, Sudan Red 7B, Sudan Red G, Sudan Orange G, Para Red, and Methyl Red were separated and analyzed in less than 9 min without labor-consuming pretreatment procedure. The chromatographic separation was performed on Ascentis Express RP-Amide column with gradient elution using mixture of acetonitrile and water, as a mobile phase at a flow rate of 1.0 mL min(-1) and 55°C of temperature. As SPE sorbent for cleanup and pre-concentration of illegal dyes short guard fused core column Ascentis Express F5 was used. The applicability of proposed method was proven for three different chilli-containing commercial samples. Recoveries for all compounds were between 90% and 108% and relative standard deviation ranged from 1% to 4% for within- and from 2% to 6% for between-day. Limits of detection showed lower values than required by European Union regulations and were in the range of 3.3-10.3 µg L(-1) for standard solutions, 5.6-235.6 µg kg(-1) for chilli-containing spices. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Two-Dimensional Capillary Electrophoresis with On-Line Sample Preparation and Cyclodextrin Separation Environment for Direct Determination of Serotonin in Human Urine

    Directory of Open Access Journals (Sweden)

    Juraj Piešťanský

    2017-10-01

    Full Text Available An advanced two-dimensional capillary electrophoresis method, based on on-line combination of capillary isotachophoresis and capillary zone electrophoresis with cyclodextrin additive in background electrolyte, was developed for effective determination of serotonin in human urine. Hydrodynamically closed separation system and large bore capillaries (300–800 µm were chosen for the possibility to enhance the sample load capacity, and, by that, to decrease limit of detection. Isotachophoresis served for the sample preseparation, defined elimination of sample matrix constituents (sample clean up, and preconcentration of the analyte. Cyclodextrin separation environment enhanced separation selectivity of capillary zone electrophoresis. In this way, serotonin could be successfully separated from the rest of the sample matrix constituents migrating in capillary zone electrophoresis step so that human urine could be directly (i.e., without any external sample preparation injected into the analyzer. The proposed method was successfully validated, showing favorable parameters of sensitivity (limit of detection for serotonin was 2.32 ng·mL−1, linearity (regression coefficient higher than 0.99, precision (repeatability of the migration time and peak area were in the range of 0.02–1.17% and 5.25–7.88%, respectively, and recovery (ranging in the interval of 90.0–93.6%. The developed method was applied for the assay of the human urine samples obtained from healthy volunteers. The determined concentrations of serotonin in such samples were in the range of 12.4–491.2 ng·mL−1 that was in good agreement with literature data. This advanced method represents a highly effective, reliable, and low-cost alternative for the routine determination of serotonin as a biomarker in human urine.

  10. Determination of methylmercury and inorganic mercury by coupling short-column ion chromatographic separation, on-line photocatalyst-assisted vapor generation, and inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Chen, Kuan-ju; Hsu, I-hsiang; Sun, Yuh-chang

    2009-12-18

    We have combined short-column ion chromatographic separation and on-line photocatalyst-assisted vapor generation (VG) techniques with inductively coupled plasma mass spectrometry to develop a simple and sensitive hyphenated method for the determination of aqueous Hg(2+) and MeHg(+) species. The separation of Hg(2+) and MeHg(+) was accomplished on a cation-exchange guard column using a glutathione (GSH)-containing eluent. To achieve optimal chromatographic separation and signal intensities, we investigated the influence of several of the operating parameters of the chromatographic and photocatalyst-assisted VG systems. Under the optimized conditions of VG process, the shortcomings of conventional SnCl(2)-based VG techniques for the vaporization of MeHg(+) was overcome; comparing to the concentric nebulizer-ICP-MS system, the analytical sensitivity of ICP-MS toward the detection of Hg(2+) and MeHg(+) were also improved to 25- and 7-fold, respectively. With the use of our established HPLC-UV/nano-TiO(2)-ICP-MS system, the precision for each analyte, based on three replicate injections of 2 ng/mL samples of each species, was better than 15% RSD. This hyphenated method also provided excellent detection limits--0.1 and 0.03 ng/mL for Hg(2+) and MeHg(+), respectively. A series of validation experiments--analysis of the NIST 2672a Standard Urine Reference Material and other urine samples--confirmed further that our proposed method could be applied satisfactorily to the determination of inorganic Hg(2+) and MeHg(+) species in real samples.

  11. The Laboratory for Laser Energetics’ Hydrogen Isotope Separation System

    Energy Technology Data Exchange (ETDEWEB)

    Shmayda, W.T., E-mail: wshm@lle.rochester.edu; Wittman, M.D.; Earley, R.F.; Reid, J.L.; Redden, N.P.

    2016-11-01

    The University of Rochester’s Laboratory for Laser Energetics has commissioned a hydrogen Isotope Separation System (ISS). The ISS uses two columns—palladium on kieselguhr and molecular sieve—that act in a complementary manner to separate the hydrogen species by mass. The 4-sL per day throughput system is compact and has no moving parts. The columns and the attendant gas storage and handling subsystems are housed in a 0.8 -m{sup 3} glovebox. The glovebox uses a helium cover gas that is continuously processed to extract oxygen and water vapor that permeates through the glovebox gloves and any tritium that is released while attaching or detaching vessels to add feedstock to or drawing product from the system. The isotopic separation process is automated and does not require manual intervention. A total of 315 TBq of tritium was extracted from 23.6 sL of hydrogen with tritium purities reaching 99.5%. Deuterium was the sole residual component in the processed gas. Raffinate contained 0.2 TBq of activity was captured for reprocessing. The total emission from the system to the environment was 0.4 GBq over three weeks.

  12. The Cryo-Thermochromatographic Separator (CTS) A new rapid separation and alpha-detection system for on-line chemical studies of highly volatile osmium and hassium (Z=108) tetroxides

    CERN Document Server

    Kirbach, U W; Gregorich, K E; Lee, D M; Ninov, V; Omtvedt, J P; Patin, J B; Seward, N K; Strellis, D A; Sudowe, R; Türler, A; Wilk, P A; Zielinski, P M; Hoffman, D C; Nitsche, H

    2002-01-01

    The Cryo-Thermochromatographic Separator (CTS) was designed and constructed for rapid, continuous on-line separation and simultaneous detection of highly volatile compounds of short-lived alpha-decaying isotopes of osmium and hassium (Hs, Z=108). A flowing carrier gas containing the volatile species is passed through a channel formed by two facing rows of 32 alpha-particle detectors, cooled to form a temperature gradient extending from 247 K at the channel entrance down to 176 K at the exit. The volatile species adsorb onto the SiO sub 2 -coated detector surfaces at a characteristic deposition temperature and are identified by their observed alpha-decay energies. The CTS was tested on-line with OsO sub 4 prepared from sup 1 sup 6 sup 9 sup - sup 1 sup 7 sup 3 Os isotopes produced in sup 1 sup 1 sup 8 sup , sup 1 sup 2 sup 0 Sn( sup 5 sup 6 Fe, 3,4,5n) reactions. An adsorption enthalpy for OsO sub 4 of -40.2+-1.5 kJ/mol on SiO sub 2 was deduced by comparing the measured deposition distribution with Monte Carlo...

  13. The laser proton acceleration in the strong charge separation regime

    Energy Technology Data Exchange (ETDEWEB)

    Nishiuchi, M. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan)]. E-mail: nishiuchi.mamiko@jaea.go.jp; Fukumi, A. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan)]|[National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage, Chiba 263-8555 (Japan); Daido, H. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan); Li, Z. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan)]|[National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage, Chiba 263-8555 (Japan); Sagisaka, A.; Ogura, K.; Orimo, S.; Kado, M.; Hayashi, Y.; Mori, M. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan); Bulanov, S.V. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan)]|[A.M. Prokhorov General Physics Institute of Russian Academy of the Sciences, Vavilov St. 38, Moscow 119991 (Russian Federation); Esirkepov, T. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan); Nemoto, K.; Oishi, Y.; Nayuki, T.; Fujii, T. [Central Research Institute of Electric Power Industry, 2-6-1 Nagasaka, Yokosuka, Kanagawa 240-0196 (Japan); Noda, A.; Iwashita, Y.; Shirai, T. [Institute for Chemical Research, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Nakamura, S. [Advanced Photon Research Center, Japan Atomic Energy Agency, 8-1 Umemi-dai, Kizu, Kyoto 619-0215 (Japan)]|[Institute for Chemical Research, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

    2006-09-18

    We report the experimental results of proton acceleration as well as the simple one-dimensional model which explains our experimental data. The proton acceleration experiment is carried out with a TW short pulse laser irradiated on a tantalum thin-foil target (3 {mu}m thickness) with an intensity of {approx}3x10{sup 18} Wcm{sup -2}. Accelerated protons exhibit a typical energy spectrum with two quasi-Maxwellian components with a high energy cut-off. We can successfully explain the higher energy part as well as the cut off energy of the proton spectrum with the simple-one-dimensional model based on the strong charge separation regime, which is the extension of the model proposed originally by [M. Passoni et al., Phys. Rev. E 69 (2004) 026411].

  14. Tunable diode laser absorption spectroscopy-based tomography system for on-line monitoring of two-dimensional distributions of temperature and H2O mole fraction.

    Science.gov (United States)

    Xu, Lijun; Liu, Chang; Jing, Wenyang; Cao, Zhang; Xue, Xin; Lin, Yuzhen

    2016-01-01

    To monitor two-dimensional (2D) distributions of temperature and H2O mole fraction, an on-line tomography system based on tunable diode laser absorption spectroscopy (TDLAS) was developed. To the best of the authors' knowledge, this is the first report on a multi-view TDLAS-based system for simultaneous tomographic visualization of temperature and H2O mole fraction in real time. The system consists of two distributed feedback (DFB) laser diodes, a tomographic sensor, electronic circuits, and a computer. The central frequencies of the two DFB laser diodes are at 7444.36 cm(-1) (1343.3 nm) and 7185.6 cm(-1) (1391.67 nm), respectively. The tomographic sensor is used to generate fan-beam illumination from five views and to produce 60 ray measurements. The electronic circuits not only provide stable temperature and precise current controlling signals for the laser diodes but also can accurately sample the transmitted laser intensities and extract integrated absorbances in real time. Finally, the integrated absorbances are transferred to the computer, in which the 2D distributions of temperature and H2O mole fraction are reconstructed by using a modified Landweber algorithm. In the experiments, the TDLAS-based tomography system was validated by using asymmetric premixed flames with fixed and time-varying equivalent ratios, respectively. The results demonstrate that the system is able to reconstruct the profiles of the 2D distributions of temperature and H2O mole fraction of the flame and effectively capture the dynamics of the combustion process, which exhibits good potential for flame monitoring and on-line combustion diagnosis.

  15. Tunable diode laser absorption spectroscopy-based tomography system for on-line monitoring of two-dimensional distributions of temperature and H2O mole fraction

    Science.gov (United States)

    Xu, Lijun; Liu, Chang; Jing, Wenyang; Cao, Zhang; Xue, Xin; Lin, Yuzhen

    2016-01-01

    To monitor two-dimensional (2D) distributions of temperature and H2O mole fraction, an on-line tomography system based on tunable diode laser absorption spectroscopy (TDLAS) was developed. To the best of the authors' knowledge, this is the first report on a multi-view TDLAS-based system for simultaneous tomographic visualization of temperature and H2O mole fraction in real time. The system consists of two distributed feedback (DFB) laser diodes, a tomographic sensor, electronic circuits, and a computer. The central frequencies of the two DFB laser diodes are at 7444.36 cm-1 (1343.3 nm) and 7185.6 cm-1 (1391.67 nm), respectively. The tomographic sensor is used to generate fan-beam illumination from five views and to produce 60 ray measurements. The electronic circuits not only provide stable temperature and precise current controlling signals for the laser diodes but also can accurately sample the transmitted laser intensities and extract integrated absorbances in real time. Finally, the integrated absorbances are transferred to the computer, in which the 2D distributions of temperature and H2O mole fraction are reconstructed by using a modified Landweber algorithm. In the experiments, the TDLAS-based tomography system was validated by using asymmetric premixed flames with fixed and time-varying equivalent ratios, respectively. The results demonstrate that the system is able to reconstruct the profiles of the 2D distributions of temperature and H2O mole fraction of the flame and effectively capture the dynamics of the combustion process, which exhibits good potential for flame monitoring and on-line combustion diagnosis.

  16. First on-line applications of multi-reflection time-of-flight mass separator at ISOLTRAP and the mass measurement of $^{82}$Zn

    CERN Document Server

    Wolf, Robert

    This thesis describes the implementation and first on-line application of a multi-reflection time-of-flight (MR-ToF) mass analyzer for high-resolution mass separation at the ISOLTRAP mass spectrometer at ISOLDE/CERN. On the one hand, the major objective was to improve ISOLTRAPs mass-measurement capabilities with respect to the ratio of delivered contaminating ions to ions of interest. On the other hand, the time necessary to purify wanted from unwanted species should be reduced as much as possible to enable access to even more exotic nuclei. The device has been set up, optimized and tested at the University of Greifswald before its move to ISOLTRAP. The achieved performance comprises mass resolving powers of up to 200000 reached at observation times of 30ms and a contamination suppression of about four orders of magnitude by use of a Bradbury-Nielsen gate. With the characteristics, it outperforms clearly the so far state-of-the-art purification method of a gas-filled Penning trap. To improve the utilization o...

  17. An efficient VLSI implementation of on-line recursive ICA processor for real-time multi-channel EEG signal separation.

    Science.gov (United States)

    Shih, Wei-Yeh; Liao, Jui-Chieh; Huang, Kuan-Ju; Fang, Wai-Chi; Cauwenberghs, Gert; Jung, Tzyy-Ping

    2013-01-01

    This paper presents an efficient VLSI implementation of on-line recursive ICA (ORICA) processor for real-time multi-channel EEG signal separation. The proposed design contains a system control unit, a whitening unit, a singular value decomposition unit, a floating matrix multiply unit and, and an ORICA weight training unit. Because the input sample rate of the ORICA processor is 128 Hz, the ORICA processor should produce independent components before the next sample is input in 1/128 s. Under the timing constraints of commutating multi-channel ORICA in real time, the design of the ORICA processor is a mixed architecture, which is designed as different hardware parallelism according to the complexity of processing units. The shared arithmetic processing unit and shared register can reduce hardware complexity and power consumption. The proposed design is implemented used TSMC 90 nm CMOS technology with 8-channel EEG processing in 128 Hz sample rate of raw data and consumes 2.827 mW at 50 MHz clock rate. The performance of the proposed design is also shown to reach 0.0078125 s latency after each EEG sample time, and the average correlation coefficient between the original source signals and extracted ORICA signals for each 1 s frame is 0.9763.

  18. Improvements to the on-line mass separator, RAMA, and the beta-delayed charged-particle emission of proton-rich sd shell nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Ognibene, Theodore Joseph [Lawrence Berkeley National Lab., CA (United States). Nuclear Science Div.

    1996-03-01

    To overcome the extreme difficulties encountered in the experimental decay studies of proton drip line nuclei, several techniques have been utilized, including a helium-jet transport system, particle identification detectors and mass separation. Improvements to the ion source/extraction region of the He-jet coupled on-line Recoil Atom Mass Analyzer (RAMA) and its target/ion source coupling resulted in significant increases in RAMA efficiencies and its mass resolution, as well as reductions in the overall transit time. At the 88-Inch Cyclotron at LBNL, the decays of 31Cl, 27P and 28P, with half-lives of 150 msec, 260 msec and 270.3 msec, respectively, were examined using a he-jet and low-energy gas ΔE-gas ΔE-silicon E detector telescopes. Total beta-delayed proton branches of 0.3% and 0.07% in 31Cl and 27P, respectively, were estimated. Several proton peaks that had been previously assigned to the decay of 31Cl were shown to be from the decay of 25Si. In 27P, two proton groups at 459 ± 14 keV and 610 ± 11 keV, with intensities of 7 ± 3% and 92 ± 4% relative to the main (100%) group were discovered. The Gamow-Teller component of the preceding beta-decay of each observed proton transition was compared to results from shell model calculations. Finally, a new proton transition was identified, following the β-decay of 28P, at 1,444 ± 12 keV with a 1.7 ± 0.5% relative intensity to the 100% group. Using similar low-energy detector telescopes and the mass separator TISOL at TRIUMF, the 109 msec and 173 msec activities, 17Ne and 33Ar, were studied. A new proton group with energy 729 ± 15 keV was observed following the beta-decay of 17Ne. Several discrepancies between earlier works as to the energies, intensities and assignments of several proton transitions from 17Ne and 33Ar were resolved.

  19. AISI/DOE Advanced Process Control Program Vol. 4 of 6: ON-LINE, NON-DESTRUCTIVE MECHANICAL PROPERTY MEASUREMENT USING LASER-ULTRASOUND

    Energy Technology Data Exchange (ETDEWEB)

    Andre' Moreau; Martin Lord; Daniel Levesqure; Marc Dubois; Jean Bussiere; Jean-Pierre Monchalin; Christian Padioleau; Guy Lamouche; Teodor Veres; Martin Viens; Harold Hebert; Pierre Basseras; Cheng-Kuei Jen

    2001-03-31

    The goal of this project was to demonstrate the feasibility to measure the mechanical properties, such as yield strength, tensile strength, elongation, strain hardening exponent and plastic strain ratio parameters, of low carbon steel sheets on the production line using laser ultrasound. The ultrasound generated by the developed apparatus travels mostly back and forth in the thickness of the steel sheet. By measuring the time delay between two echoes, and the relative amplitude of these two echoes, one can measure ultrasound velocity and attenuation. These are governed by the microstructure: grain size, crystallographic texture, dislocations, etc. Thus, by recording the time behavior of the ultrasonic signal, one can extract microstructural information. These microstructural information together with the modified Hall-Petch equation allow measurement of the mechanical properties. Through laboratory investigations with a laboratory laser ultrasound system, followed by the installation of a prototype system at LTV Steel Company's No.1 Inspection Line in Cleveland, all target mechanical properties of ultra low carbon (ULC), low carbon (LC) and high strength low alloy (HSLA) steel sample lots were measured meeting or nearly meeting all the target accuracies. Thus, the project realized its goal to demonstrate that the mechanical properties of low carbon steel sheets can be measured on-line using laser ultrasound

  20. On-line/on-site analysis of heavy metals in water and soils by laser induced breakdown spectroscopy

    Science.gov (United States)

    Meng, Deshuo; Zhao, Nanjing; Wang, Yuanyuan; Ma, Mingjun; Fang, Li; Gu, Yanhong; Jia, Yao; Liu, Jianguo

    2017-11-01

    The enrichment method of heavy metal in water with graphite and aluminum electrode was studied, and combined with plasma restraint device for improving the sensitivity of detection and reducing the limit of detection (LOD) of elements. For aluminum electrode enrichment, the LODs of Cd, Pb and Ni can be as low as several ppb. For graphite enrichment, the measurement time can be less than 3 min. The results showed that the graphite enrichment and aluminum electrode enrichment method can effectively improve the LIBS detection ability. The graphite enrichment method combined with plasma spatial confinement is more suitable for on-line monitoring of industrial waste water, the aluminum electrode enrichment method can be used for trace heavy metal detection in water. A LIBS method and device for soil heavy metals analysis was also developed, and a mobile LIBS system was tested in outfield. The measurement results deduced from LIBS and ICP-MS had a good consistency. The results provided an important application support for rapid and on-site monitoring of heavy metals in soil. (Left: the mobile LIBS system for analysis of heavy metals in soils. Top right: the spatial confinement device. Bottom right: automatic graphite enrichment device for on0line analysis of heavy metals in water).

  1. Laser mass spectrometry as on-line sensor for industrial process analysis: process control of coffee roasting.

    Science.gov (United States)

    Dorfner, Ralph; Ferge, Thomas; Yeretzian, Chahan; Kettrup, Antonius; Zimmermann, Ralf

    2004-03-01

    The objective of the project is to develop on-line, real-time, and noninvasive process control tools of coffee roasting that help deliver a consistent and high-quality coffee aroma. The coffee roasting process was analyzed by direct injection of the roaster gas into a time-of-flight mass spectrometer and ionized either by resonance enhanced multiphoton ionization (REMPI) at 266 and 248 nm or vacuum ultraviolet single-photon ionization (VUV-SPI) at 118 nm. The VUV ionization scheme allows detecting mainly the most volatile and abundant compounds of molecular mass below 100 m/z, while REMPI ionizes mainly aromatic compounds of molecular mass larger than 100 m/z. Combining the compounds ionized by resonant and single-photon ionization, approximately 30 volatile organic compounds are monitored in real time. Time-intensity profiles of 10 important volatile coffee compounds were discussed in connection with their formation chemistry during roasting. Applying multivariate statistics (principle component analysis) on time-intensity traces of nine volatile coffee compounds, the roasting degree could be traced as a consistent path in the score plot of the two most significant principle components (including 68% of the total variance), for a range of roasting temperatures (200-250 degrees C).

  2. Thermal Boundary Layer Effects on Line-of-Sight Tunable Diode Laser Absorption Spectroscopy (TDLAS) Gas Concentration Measurements.

    Science.gov (United States)

    Qu, Zhechao; Werhahn, Olav; Ebert, Volker

    2018-01-01

    The effects of thermal boundary layers on tunable diode laser absorption spectroscopy (TDLAS) measurement results must be quantified when using the line-of-sight (LOS) TDLAS under conditions with spatial temperature gradient. In this paper, a new methodology based on spectral simulation is presented quantifying the LOS TDLAS measurement deviation under conditions with thermal boundary layers. The effects of different temperature gradients and thermal boundary layer thickness on spectral collisional widths and gas concentration measurements are quantified. A CO 2 TDLAS spectrometer, which has two gas cells to generate the spatial temperature gradients, was employed to validate the simulation results. The measured deviations and LOS averaged collisional widths are in very good agreement with the simulated results for conditions with different temperature gradients. We demonstrate quantification of thermal boundary layers' thickness with proposed method by exploitation of the LOS averaged the collisional width of the path-integrated spectrum.

  3. A LASER ION-SOURCE FOR ONLINE MASS SEPARATION

    NARCIS (Netherlands)

    VANDUPPEN, P; DENDOOVEN, P; HUYSE, M; VERMEEREN, L; QAMHIEH, ZN; SILVERANS, RE; VANDEWEERT, E

    1992-01-01

    A laser ion source based on resonance photo ionization in a gas cell is proposed. The gas cell, filled with helium, consists of a target chamber in which the recoil products are stopped and neutralized, and an ionization chamber where the atoms of interest are selectively ionized by the laser light.

  4. Isomer separation of $^{70g}Cu$ and $^{70m}Cu$ with a resonance ionization laser ion source

    CERN Document Server

    Köster, U; Mishin, V I; Weissman, L; Huyse, M; Kruglov, K; Müller, W F; Van Duppen, P; Van Roosbroeck, J; Thirolf, P G; Thomas, H C; Weisshaar, D W; Schulze, W; Borcea, R; La Commara, M; Schatz, H; Schmidt, K; Röttger, S; Huber, G; Sebastian, V; Kratz, K L; Catherall, R; Georg, U; Lettry, Jacques; Oinonen, M; Ravn, H L; Simon, H

    2000-01-01

    Radioactive copper isotopes were ionized with the resonance ionization laser ion source at the on-line isotope separator ISOLDE (CERN). Using the different hyperfine structure in the 3d/sup 10/ 4s /sup 2/S/sub 1/2/-3d/sup 10/ 4p /sup 2/P/sub 1/2//sup 0/ transition the low- and high-spin isomers of /sup 70/Cu were selectively enhanced by tuning the laser wavelength. The light was provided by a narrow-bandwidth dye laser pumped by copper vapor lasers and frequency doubled in a BBO crystal. The ground state to isomeric state intensity ratio could be varied by a factor of 30, allowing to assign gamma transitions unambiguously to the decay of the individual isomers. It is shown that the method can also be used to determine magnetic moments. In a first experiment for the 1/sup +/ ground state of /sup 70/Cu a magnetic moment of (+)1.8(3) mu /sub N/ and for the high-spin isomer of /sup 70/Cu a magnetic moment of (+or-)1.2(3) mu /sub N/ could be deduced. (20 refs).

  5. An LC-MS Assay with Isocratic Separation and On-Line Solid Phase Extraction to Improve the Routine Therapeutic Drug Monitoring of Busulfan in Plasma

    Directory of Open Access Journals (Sweden)

    Ialongo Cristiano

    2017-04-01

    Full Text Available Background: Busulfan (Bu requires therapeutic drug monitoring (TDM in subjects undergoing a conditioning regimen for hematopoietic stem cell transplantation (HSCT. To speed up the procedure and increase reproducibility, we improved our routine LC-MS/MS assay using the on-line solid-phase extraction (SPE of samples.

  6. Laser vaporization/ionization interface for coupling microscale separation techniques with mass spectrometry

    Science.gov (United States)

    Yeung, E.S.; Chang, Y.C.

    1999-06-29

    The present invention provides a laser-induced vaporization and ionization interface for directly coupling microscale separation processes to a mass spectrometer. Vaporization and ionization of the separated analytes are facilitated by the addition of a light-absorbing component to the separation buffer or solvent. 8 figs.

  7. Laser vaporization/ionization interface for coupling microscale separation techniques with mass spectrometry

    Science.gov (United States)

    Yeung, Edward S.; Chang, Yu-chen

    1999-06-29

    The present invention provides a laser-induced vaporization and ionization interface for directly coupling microscale separation processes to a mass spectrometer. Vaporization and ionization of the separated analytes are facilitated by the addition of a light-absorbing component to the separation buffer or solvent.

  8. Mode-Locked CO Laser for Isotope Separation of Uranium Employing Condensation Repression

    Directory of Open Access Journals (Sweden)

    Igor Y. Baranov

    2010-01-01

    Full Text Available In the present work, we have suggested a technical solution of a CO laser facility for industrial separation of uranium used in the production of fuel for nuclear power plants. There has been used a method of laser isotope separation of uranium, employing condensation repression in a free jet. The laser operation with nanosecond pulse irradiation can provide acceptable efficiency in the separating unit and the high effective coefficient of the laser with the wavelength of 5.3 μm. Receiving a uniform RF discharge under medium pressure and high Mach numbers in the gas stream solves the problem of an electron beam and cryogenic cooler of CO lasers. The laser active medium is being cooled while it is expanding in the nozzle; a low-current RF discharge is similar to a non-self-sustained discharge. In the present work, we have developed a calculation model of optimization and have defined the parameters of a mode-locked CO laser with an RF discharge in the supersonic stream. The CO laser average power of 3 kW is sufficient for efficient industrial isotope separation of uranium at one facility.

  9. Flow-injection on-line electrochemical separation/determination of ions using a two-step oil/water-type flow cell system.

    Science.gov (United States)

    Gohara, Emi; Osakai, Toshiyuki

    2010-01-01

    A flow system for electrochemical separation and detection of ions was constructed by connecting two oil/water (O/W)-type flow cells, in which a long polarizable O/W interface was formed at the inner surface of a porous poly(tetrafluoroethylene) (PTFE) tube. Using this system, acetylcholine and choline ions, whose ion-transfer potentials are different by only 60 mV, could be separated and determined simultaneously. It was thus shown that the present flow system is promising for the electrochemical flow separation/detection of ions and, in principle, also for electrochromatographic separation of ions.

  10. Control strategies for laser separation of carbon isotopes

    Indian Academy of Sciences (India)

    Unknown

    Operation at higher energy density (fluence) to increase the yield severely degrades the enrichment ... two-stage, closed chemical cycle and is very useful for getting high enrichment level. If we need a product with .... The 50 W pulsed CO2 laser operates at 10 Hz and gives rise to 5 J energy on 10 P (20) line at 944 cm–1.

  11. On-line solid phase selective separation and preconcentration of Cd(II) by solid-phase extraction using carbon active modified with methyl thymol blue

    Energy Technology Data Exchange (ETDEWEB)

    Ensafi, Ali A. [College of Chemistry, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)], E-mail: Ensafi@cc.iut.ac.ir; Ghaderi, Ali R. [College of Chemistry, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2007-09-05

    An on-line flow system was used to develop a selective and efficient on-line sorbent extraction preconcentration system for cadmium. The method is based on adsorption of cadmium ions onto the activated carbon modified with methyl thymol blue. Then the adsorbed ions were washed using 0.5 M HNO{sub 3} and the eluent was used to determine the Cd(II) ions using flame atomic absorption spectrometry. The results obtained show that the modified activated carbon has the greatest adsorption capacity of 80 {mu}g of Cd(II) per 1.0 g of the solid phase. The optimal pH value for the quantitative preconcentration was 9.0 and full desorption is achieved by using 0.5 M HNO{sub 3} solution. It is established that the solid phase can be used repeatedly without a considerable adsorption capacity loss. The detection limit was less than 1 ng mL{sup -1} Cd(II), with an enrichment factor of 1000. The calibration graph was linear in the range of 1-2000 ng mL{sup -1} Cd(II). The developed method has been applied to the determination of trace cadmium (II) in water samples and in the following reference materials: sewage sludge (CRM144R), and sea water (CASS.4) with satisfactory results. The accuracy was assessed through recovery experiments.

  12. Determination of Hg{sup 2+} by on-line separation and pre-concentration with atmospheric-pressure solution-cathode glow discharge atomic emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Li, Qing [Shanghai Institute of Ceramics, Chinese Academy of Science, Shanghai 200050 (China); Zhang, Zhen [Shanghai Institute of Ceramics, Chinese Academy of Science, Shanghai 200050 (China); School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China); Wang, Zheng, E-mail: wangzheng@mail.sic.ac.cn [Shanghai Institute of Ceramics, Chinese Academy of Science, Shanghai 200050 (China)

    2014-10-03

    Highlights: • A modified SBA-15 mesoporous silica (SH-SBA-15) was synthesized as a sorbent. • On-line SPE combined with SCGD-AES based on FIA was used to detect Hg{sup 2+} firstly. • A simple, low-cost Hg{sup 2+} analysis in a complex matrix was established. • The sensitive detection of Hg{sup 2+} was achieved with a detection limit of 0.75 μg L{sup −1}. - Abstract: A simple and sensitive method to determine Hg{sup 2+} was developed by combining solution-cathode glow discharge atomic emission spectrometry (SCGD-AES) with flow injection (FI) based on on-line solid-phase extraction (SPE). We synthesized L-cysteine-modified mesoporous silica and packed it in an SPE microcolumn, which was experimentally determined to possess a good mercury adsorption capacity. An enrichment factor of 42 was achieved under optimized Hg{sup 2+} elution conditions, namely, an FI flow rate of 2.0 mL min{sup −1} and an eluent comprised of 10% thiourea in 0.2 mol L{sup −1} HNO{sub 3}. The detection limit of FI–SCGD-AES was determined to be 0.75 μg L{sup −1}, and the precision of the 11 replicate Hg{sup 2+} measurements was 0.86% at a concentration of 100 μg L{sup −1}. The proposed method was validated by determining Hg{sup 2+} in certified reference materials such as human hair (GBW09101b) and stream sediment (GBW07310)

  13. Development of a Versatile Laser Ultrasonic System and Application to On-Line Measurement for Process Control of Wall Thickness and Eccentrictiy of Steel Seamless Mechanical Tubing

    Energy Technology Data Exchange (ETDEWEB)

    Kisner, R.A.; Kercel, S.W.; Damiano, B.; Bingham, P.R.; Gee, T.F.; Tucker, R.W.; Moore, M.R.; Hileman, M.; Emery, M.; Lenarduzzi, R.; Hardy, J.E.; Weaver, K.; Crutcher, R.; Kolarik, R.V., II; Vandervaart, R.H.

    2002-04-24

    Researchers at the Timken Company conceived a project to develop an on-line instrument for wall thickness measurement of steel seamless mechanical tubing based on laser ultrasonic technology. The instrument, which has been installed and tested at a piercing mill, provides data on tube eccentricity and concentricity. Such measurements permit fine-tuning of manufacturing processes to eliminate excess material in the tube wall and therefore provide a more precisely dimensioned product for their customers. The resulting process energy savings are substantial, as is lowered environmental burden. The expected savings are $85.8 million per year in seamless mechanical tube piercing alone. Applied across the industry, this measurement has a potential of reducing energy consumption by 6 x 10{sup 12} BTU per year, greenhouse gas emissions by 0.3 million metric tons carbon equivalent per year, and toxic waste by 0.255 million pounds per year. The principal technical contributors to the project were the Timken Company, Industrial Materials Institute (IMI, a contractor to Timken), and Oak Ridge National Laboratory (ORNL). Timken provided mill access as well as process and metallurgical understanding. Timken researchers had previously developed fundamental ultrasonic analysis methods on which this project is based. IMI developed and fabricated the laser ultrasonic generation and receiver systems. ORNL developed Bayesian and wavelet based real-time signal processing, spread-spectrum wireless communication, and explored feature extraction and pattern recognition methods. The resulting instrument has successfully measured production tubes at one of Timken's piercing mills. This report concentrates on ORNL's contribution through the CRADA mechanism. The three components of ORNL's contribution were met with mixed success. The real-time signal-processing task accomplished its goal of improvement in detecting time of flight information with a minimum of false data. The

  14. Modelling of multifrequency IRMPD for laser isotope separation

    Indian Academy of Sciences (India)

    The process of infrared multiple photon dissociation (IRMPD) of molecules is of great fundamental importance and has practical significance, such as isotope separation etc. Unfortunately, a clear insight into the process has been hindered by the bewildering array of important variables affecting MPD. The dissociation ...

  15. On-line simultaneous and rapid separation of anions and cations from a single sample using dual-capillary sequential injection-capillary electrophoresis.

    Science.gov (United States)

    Gaudry, Adam J; Guijt, Rosanne M; Macka, Mirek; Hutchinson, Joseph P; Johns, Cameron; Hilder, Emily F; Dicinoski, Greg W; Nesterenko, Pavel N; Haddad, Paul R; Breadmore, Michael C

    2013-06-05

    A novel capillary electrophoresis (CE) approach has been developed for the simultaneous rapid separation and identification of common environmental inorganic anions and cations from a single sample injection. The method utilised a sequential injection-capillary electrophoresis instrument (SI-CE) with capacitively-coupled contactless conductivity detection (C(4)D) constructed in-house from commercial-off-the-shelf components. Oppositely charged analytes from a single sample plug were simultaneously injected electrokinetically onto two separate capillaries for independent separation and detection. Injection was automated and may occur from a syringe or be directly coupled to an external source in a continuous manner. Software control enabled high sample throughput (17 runs per hour for the target analyte set) and the inclusion of an isolation valve allowed the separation capillaries to be flushed, increasing throughput by removing slow migrating species as well as improving repeatability. Various environmental and industrial samples (subjected only to filtering) were analysed in the laboratory with a 3 min analysis time which allowed the separation of 23 inorganic and small organic anions and cations. Finally, the system was applied to an extended automated analysis of Hobart Southern Water tap water for a period of 48 h. The overall repeatability of the migration times of a 14 analyte standard sample was less than 0.74% under laboratory conditions. LODs ranged from 5 to 61 μg L(-1). The combination of automation, high confidence of peak identification, and low limits of detection make this a useful system for the simultaneous identification of a range of common inorganic anions and cations for discrete or continuous monitoring applications. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Flow injection and sequential injection: The optimal solutions for executing appropriate on-line separation and preconcentration schemes for detection of trace-level concentrations of metals in complex matrices by ICPMS

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    , or because the analyte material, in addition to suitable separations, needs to be subjected to preconcentration. Such pretreatments schemes are advantageously performed in flow injection (FI) or sequential injection (SI) manifolds, where all unit operations can be effected on-line and under enclosed...... and strictly controlled conditions. Various separation/preconcentration procedures are feasible, such as liquid-liquid extraction encompassing back-extraction into an aqueous solution, (co)precipitation with collection in knotted reactors, adsorption on columns packed with hydrophophilic or hydrophobic...... as these adversely will impair its performance. In the lecture, selected examples of separation/preconcentration FI/SI-procedures for the determination of trace levels of metals will be presented, particular emphasis being placed on the use of the novel “lab-on-valve” (LOV) concept....

  17. Numerical investigation of the boundary layer separation in chemical oxygen iodine laser

    Science.gov (United States)

    Huai, Ying; Jia, Shuqin; Wu, Kenan; Jin, Yuqi; Sang, Fengting

    2017-11-01

    Large eddy simulation is carried out to model the flow process in a supersonic chemical oxygen iodine laser. Unlike the common approaches relying on the tensor representation theory only, the model in the present work is an explicit anisotropy-resolving algebraic Subgrid-scale scalar flux formulation. With an accuracy in capturing the unsteady flow behaviours in the laser. Boundary layer separation initiated by the adverse pressure gradient is identified using Large Eddy Simulation. To quantify the influences of flow boundary layer on the laser performance, the fluid computations coupled with a physical optics loaded cavity model is developed. It has been found that boundary layer separation has a profound effect on the laser outputs due to the introduced shock waves. The F factor of the output beam decreases to 10% of the original one when the boundary transit into turbulence for the setup depicted in the paper. Because the pressure is always greater on the downstream of the boundary layer, there will always be a tendency of boundary separation in the laser. The results inspire designs of the laser to apply positive/passive control methods avoiding the boundary layer perturbation.

  18. Laser isotope separation in nuclear-waste by-product utilization

    Energy Technology Data Exchange (ETDEWEB)

    Dubrin, J.W.

    1983-02-01

    Various by-products in spent nuclear fuels including strategic metals are uniquely useful and of high intrinsic value. Isotope separation is necessary to achieve the full benefits of fission-product partitioning, increasing the specific activity of radioactive modifications or reducing the intrinsic radiation associated with various elements. The atomic-vapor laser-isotope-separation process, under large-scale development for uranium enrighment, applies to most of the spent-fuel nuclides and offers attractive benefit to costs. 11 figures.

  19. Laser-induced charge separation in organic nanofibers

    DEFF Research Database (Denmark)

    Tavares, Luciana; Behn, Dino; Kjelstrup-Hansen, Jakob

    Organic semiconductors have unique properties that can be tailored via synthetic chemistry for specific applications, which combined with their low price and straight-forward processing over large areas make them interesting materials for future devices. Certain oligomers can self-assemble into c......Organic semiconductors have unique properties that can be tailored via synthetic chemistry for specific applications, which combined with their low price and straight-forward processing over large areas make them interesting materials for future devices. Certain oligomers can self......-assemble into crystalline nanofibers by vapor deposition onto muscovite mica substrates, and we have recently shown that such nanofibers can be transferred to different substrates by roll-printing and used as the active material in e.g. organic field-effect transistors (OFETs), organic light-emitting transistors (OLETs......), and organic phototransistors (OPTs). However, several device-related issues incl. charge-separation and local band structure remain poorly understood. In this work, we use electrostatic force microscopy (EFM) combined with optical microscopy to study the local surface charge of an individual organic nanofiber...

  20. Resonance ionization for the detection and for the production of radioactive ion beams. From the highly selective ultra-trace detection to the selective on-line laser ion source; Resonanzionisation zum Nachweis und zur Erzeugung radioaktiver Ionenstrahlen. Vom hochselektiven Ultraspurennachweis zur selektiven on-line Laserionenquelle

    Energy Technology Data Exchange (ETDEWEB)

    Geppert, C.

    2005-09-23

    Resonant laser ionization has been established as a universal technique for applications, which require a selective ionization and high efficiency. In this thesis two laser systems were developed and applied to attain different objectives. The first part describes the development of high resolution resonance ionization mass spectrometry (RIMS) for the ultra-trace analysis of {sup 41}Ca. Therefore three continuous diode lasers were combined with a quadrupole mass spectrometer. At an efficiency of 1 x 10{sup -5} a detection level of 2 x 10{sup -13} {sup 41}Ca/{sup tot}Ca was achieved. The method allowed the participation in an interdisciplinary osteoporosis research network. Intercomparison measurements demonstrated an excellent agreement between RIMS and all other present {sup 41}Ca ultra-trace analysis methods. The second part of the thesis refers to the adaptation of a tunable, high repetition rate titanium:sapphire laser system for the selective production of radioactive ion beams at a laser ion source, making an efficient resonant excitation of the majority of the elements of the periodic system possible. Hence a combined frequency doubling and tripling unit was constructed. The applicability of the solid-state laser system was demonstrated in off-line measurements at Mainz and on the ISOL facilities at TRIUMF and ORNL and resulted in the first on-line run at TRIUMF. (Orig.)

  1. Semiconductor laser utilizing transitions between size-quantization levels with separate electron and optical confinement

    Energy Technology Data Exchange (ETDEWEB)

    Aleksanyan, A.G.; Aleksanyan, A.G.; Mirzabekyan, G.E.; Popov, Y.M.

    1984-09-01

    An analytic expression is obtained for the threshold of a semiconductor laser in the form of a five-layer structure with separate electron and optical confinement. An analysis is made of the dependence of the lasing threshold on the thickness of the active and waveguide layers, and also on the permittivities of these layers.

  2. First on-line results from the CRIS (Collinear Resonant Ionisation Spectroscopy) beam line at ISOLDE

    Energy Technology Data Exchange (ETDEWEB)

    Procter, T. J., E-mail: thomas.procter@postgrad.manchester.ac.uk; Flanagan, K. T. [University of Manchester (United Kingdom); Collaboration: CRIS Collaboration

    2013-04-15

    The CRIS (Collinear Resonant Ionisation Spectroscopy) experiment at the on-line isotope separator facility, ISOLDE, CERN, has been constructed for high-sensitivity laser spectroscopy measurements on radioactive isotopes. The technique determines the magnetic dipole and electric quadrupole moments, nuclear spin and changes in mean-square charge radii of exotic nuclei via measurement of their hyperfine structures and isotope shifts. In November 2011 the first on-line run was performed using the CRIS beam line, when the hyperfine structure of {sup 207}Fr was successfully measured. This paper will describe the technique and experimental setup of CRIS and present the results from the first on-line experiment.

  3. Retrieval of interatomic separations of molecules from laser-induced high-order harmonic spectra

    Energy Technology Data Exchange (ETDEWEB)

    Le, Van-Hoang; Nguyen, Ngoc-Ty [Department of Physics, University of Pedagogy, 280 An Duong Vuong, Ward 5, Ho Chi Minh City (Viet Nam); Jin, C; Le, Anh-Thu; Lin, C D [J. R. Macdonald Laboratory, Department of Physics, Kansas State University, Manhattan, KS 66506 (United States)

    2008-04-28

    We illustrate an iterative method for retrieving the internuclear separations of N{sub 2}, O{sub 2} and CO{sub 2} molecules using the high-order harmonics generated from these molecules by intense infrared laser pulses. We show that accurate results can be retrieved with a small set of harmonics and with one or few alignment angles of the molecules. For linear molecules the internuclear separations can also be retrieved from harmonics generated using isotropically distributed molecules. By extracting the transition dipole moment from the high-order harmonic spectra, we further demonstrated that it is preferable to retrieve the interatomic separation iteratively by fitting the extracted dipole moment. Our results show that time-resolved chemical imaging of molecules using infrared laser pulses with femtosecond temporal resolutions is possible.

  4. Three decades of research using IGISOL technique at the University of Jyväskylä a portrait of the Ion Guide Isotope Separator On-Line facility in Jyväskylä

    CERN Document Server

    Eronen, Tommi; Jokinen, Ari; Kankainen, Anu; Moore, Iain; Penttilä, Heikki

    2014-01-01

    The IGISOL group at the University of Jyväskyla studies the properties of nuclei far off the line of beta stability. These studies are performed locally at the Jyväskylä Ion Guide Isotope Separator On-Line (IGISOL) facility, as well as at a number of other laboratories such as the ISOLDE facility in CERN, at GANIL and in Helmholzzentrum GSI, the location of the future radioactive beam facility FAIR. The group is also actively involved in work to support the development of international future facilities EURISOL and aforementioned FAIR. This book presents  carefully selected papers to portrait the work at IGISOL. Previously published in the journals Hyperfine Interactions and European Physical Journal A.

  5. Feasibility of laser-separation of /sup 36/S and its use as an atmospheric tracer

    Energy Technology Data Exchange (ETDEWEB)

    Herman, I.P.

    1981-08-18

    This report addresses one of the possible uses of isotopic tracers, produced by laser-assisted iostope separation, in the investigation of pollution problems. Specifically, the use of laser-produced sulfur isotopes to analyze the acid rain situation is considered as it is a most important application of this technique. The proposed use of isotopically-labelled SO/sub 2/, in particular of /sup 36/SO/sub 2/, as a tracer can help elucidate the chemical and transport facets in a unified experiment. Separation of a sufficient quantity of the rare /sup 36/S isotope to perform several of these tracer studies appears to be practical and economical. This overall process is certainly deserving of further investigation.

  6. Interaction Mechanisms of Cavitation Bubbles Induced by Spatially and Temporally Separated fs-Laser Pulses

    Science.gov (United States)

    Tinne, Nadine; Kaune, Brigitte; Krüger, Alexander; Ripken, Tammo

    2014-01-01

    The emerging use of femtosecond lasers with high repetition rates in the MHz regime together with limited scan speed implies possible mutual optical and dynamical interaction effects of the individual cutting spots. In order to get more insight into the dynamics a time-resolved photographic analysis of the interaction of cavitation bubbles is presented. Particularly, we investigated the influence of fs-laser pulses and their resulting bubble dynamics with various spatial as well as temporal separations. Different time courses of characteristic interaction effects between the cavitation bubbles were observed depending on pulse energy and spatio-temporal pulse separation. These ranged from merely no interaction to the phenomena of strong water jet formation. Afterwards, the mechanisms are discussed regarding their impact on the medical application of effective tissue cutting lateral to the laser beam direction with best possible axial precision: the mechanical forces of photodisruption as well as the occurring water jet should have low axial extend and a preferably lateral priority. Furthermore, the overall efficiency of energy conversion into controlled mechanical impact should be maximized compared to the transmitted pulse energy and unwanted long range mechanical side effects, e.g. shock waves, axial jet components. In conclusion, these experimental results are of great importance for the prospective optimization of the ophthalmic surgical process with high-repetition rate fs-lasers. PMID:25502697

  7. Interaction mechanisms of cavitation bubbles induced by spatially and temporally separated fs-laser pulses.

    Directory of Open Access Journals (Sweden)

    Nadine Tinne

    Full Text Available The emerging use of femtosecond lasers with high repetition rates in the MHz regime together with limited scan speed implies possible mutual optical and dynamical interaction effects of the individual cutting spots. In order to get more insight into the dynamics a time-resolved photographic analysis of the interaction of cavitation bubbles is presented. Particularly, we investigated the influence of fs-laser pulses and their resulting bubble dynamics with various spatial as well as temporal separations. Different time courses of characteristic interaction effects between the cavitation bubbles were observed depending on pulse energy and spatio-temporal pulse separation. These ranged from merely no interaction to the phenomena of strong water jet formation. Afterwards, the mechanisms are discussed regarding their impact on the medical application of effective tissue cutting lateral to the laser beam direction with best possible axial precision: the mechanical forces of photodisruption as well as the occurring water jet should have low axial extend and a preferably lateral priority. Furthermore, the overall efficiency of energy conversion into controlled mechanical impact should be maximized compared to the transmitted pulse energy and unwanted long range mechanical side effects, e.g. shock waves, axial jet components. In conclusion, these experimental results are of great importance for the prospective optimization of the ophthalmic surgical process with high-repetition rate fs-lasers.

  8. Interaction mechanisms of cavitation bubbles induced by spatially and temporally separated fs-laser pulses.

    Science.gov (United States)

    Tinne, Nadine; Kaune, Brigitte; Krüger, Alexander; Ripken, Tammo

    2014-01-01

    The emerging use of femtosecond lasers with high repetition rates in the MHz regime together with limited scan speed implies possible mutual optical and dynamical interaction effects of the individual cutting spots. In order to get more insight into the dynamics a time-resolved photographic analysis of the interaction of cavitation bubbles is presented. Particularly, we investigated the influence of fs-laser pulses and their resulting bubble dynamics with various spatial as well as temporal separations. Different time courses of characteristic interaction effects between the cavitation bubbles were observed depending on pulse energy and spatio-temporal pulse separation. These ranged from merely no interaction to the phenomena of strong water jet formation. Afterwards, the mechanisms are discussed regarding their impact on the medical application of effective tissue cutting lateral to the laser beam direction with best possible axial precision: the mechanical forces of photodisruption as well as the occurring water jet should have low axial extend and a preferably lateral priority. Furthermore, the overall efficiency of energy conversion into controlled mechanical impact should be maximized compared to the transmitted pulse energy and unwanted long range mechanical side effects, e.g. shock waves, axial jet components. In conclusion, these experimental results are of great importance for the prospective optimization of the ophthalmic surgical process with high-repetition rate fs-lasers.

  9. Tunable diode laser absorption spectroscopy-based tomography system for on-line monitoring of two-dimensional distributions of temperature and H{sub 2}O mole fraction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Lijun, E-mail: lijunxu@buaa.edu.cn; Liu, Chang; Jing, Wenyang; Cao, Zhang [School of Instrument Science and Opto-Electronic Engineering, Beihang University, Beijing 100191 (China); Ministry of Education’s Key Laboratory of Precision Opto-Mechatronics Technology, Beijing 100191 (China); Xue, Xin; Lin, Yuzhen [School of Energy and Power Engineering, Beihang University, Beijing 100191 (China)

    2016-01-15

    To monitor two-dimensional (2D) distributions of temperature and H{sub 2}O mole fraction, an on-line tomography system based on tunable diode laser absorption spectroscopy (TDLAS) was developed. To the best of the authors’ knowledge, this is the first report on a multi-view TDLAS-based system for simultaneous tomographic visualization of temperature and H{sub 2}O mole fraction in real time. The system consists of two distributed feedback (DFB) laser diodes, a tomographic sensor, electronic circuits, and a computer. The central frequencies of the two DFB laser diodes are at 7444.36 cm{sup −1} (1343.3 nm) and 7185.6 cm{sup −1} (1391.67 nm), respectively. The tomographic sensor is used to generate fan-beam illumination from five views and to produce 60 ray measurements. The electronic circuits not only provide stable temperature and precise current controlling signals for the laser diodes but also can accurately sample the transmitted laser intensities and extract integrated absorbances in real time. Finally, the integrated absorbances are transferred to the computer, in which the 2D distributions of temperature and H{sub 2}O mole fraction are reconstructed by using a modified Landweber algorithm. In the experiments, the TDLAS-based tomography system was validated by using asymmetric premixed flames with fixed and time-varying equivalent ratios, respectively. The results demonstrate that the system is able to reconstruct the profiles of the 2D distributions of temperature and H{sub 2}O mole fraction of the flame and effectively capture the dynamics of the combustion process, which exhibits good potential for flame monitoring and on-line combustion diagnosis.

  10. The effects of laser plasma discharge on a separating boundary layer

    Science.gov (United States)

    Browne, Kevin Patrick

    Modification of the separation and drag characteristics of a laminar airfoil using a remotely located high-power laser was experimentally investigated in a low speed, low-turbulence wind tunnel. It was proposed that pulsed laser energy could be used to cause a disturbance in the boundary layer of a laminar airfoil thus modifying the flow by inducing a cross exchange of momentum within the boundary layer. The result is a unique zero net mass flux and zero net momentum flux actuator for delaying separation. A 500 mm chord length laminar airfoil was designed and fabricated to closely emulate in the wind tunnel the flight characteristics of a Cessna 177 at cruise speed. At zero degrees angle of attack the airfoil was determined to have an incipient laminar separation bubble on its lifting surface between 67 and 80% chord. By focusing the collimated laser beam emitted from a 900mW Q-switched YAG laser a strong plasma pulse was generated from the optical breakdown of the air. The plasma was focused to a location approximately 2 mm in front of the airfoil. High temperature plasma produced by each pulse generates a shockwave and volume of heated turbulent air which interacts with the airfoil and travels along its lifting surface. Particle Image Velocimetry (PIV) system was used as the primary data collection method. Determining the effects of the plasma on the flow over the airfoil requires measuring the behavior deep within the boundary layer which is typically less than 2 mm thick. Custom optics were used to capture flow behavior in a 6 mm x 6 mm field of view along the centerline of the airfoil. The PIV system was electronically triggered by the plasma laser. By varying the trigger delay time a range of data captured the onset, peak and decay of the plasma with fine spatial resolution. Results of this investigation show that a burst of turbulence generated by the pulsed plasma exchanges significant momentum between the freestream and the incipient separation bubble

  11. Anisotropic imprint of amorphization and phase separation in manganite thin films via laser interference irradiation

    KAUST Repository

    Ding, Junfeng

    2014-09-16

    Materials with mesoscopic structural and electronic phase separation, either inherent from synthesis or created via external means, are known to exhibit functionalities absent in the homogeneous counterparts. One of the most notable examples is the colossal magnetoresistance discovered in mixed-valence manganites, where the coexistence of nano-to micrometer-sized phase-separated domains dictates the magnetotransport. However, it remains challenging to pattern and process such materials into predesigned structures and devices. In this work, a direct laser interference irradiation (LII) method is employed to produce periodic stripes in thin films of a prototypical phase-separated manganite Pr0.65(Ca0.75Sr0.25)0.35MnO3 (PCSMO). LII induces selective structural amorphization within the crystalline PCSMO matrix, forming arrays with dimensions commensurate with the laser wavelength. Furthermore, because the length scale of LII modification is compatible to that of phase separation in PCSMO, three orders of magnitude of increase in magnetoresistance and significant in-plane transport anisotropy are observed in treated PCSMO thin films. Our results show that LII is a rapid, cost-effective and contamination-free technique to tailor and improve the physical properties of manganite thin films, and it is promising to be generalized to other functional materials.

  12. New experimental setup for boron isotopes separation by laser assisted retardation of condensation method

    Energy Technology Data Exchange (ETDEWEB)

    Lyakhov, K. A.; Lee, H. J. [Institute for Nuclear Science and Technology, Jeju (Korea, Republic of)

    2013-05-15

    Proposed static model corresponds to the two-cycle iterative scheme for boron isotopes separation. This rather simple model helps to understand combined action of all important parameters and relations between them on boron isotopes separation by SILARC method. These parameters include carrier gas choice, molar fraction at what BCl{sub 3} gas is dissolved in carrier gas, laser intensity, providing minimum of energy expenses and the largest output, optimal gas pressure and temperature in backing and downstream chambers, optimal irradiation cell and skimmer chamber dimensions, optimal nozzle throughput. It was suggested a method for finding optimal values of these parameters based on global minimum or energy spent on production of unit of isotope, which is analog of Separative Work Unit (SWU). It was shown that the most optimal carrier gas, corresponding to this minimum, among other considered-N{sub 2},NO{sub 2},SF{sub 6}, is Ar. Restriction on the maximal irradiation chamber length, caused by dimerization rate, is also considered. Two types of industrial scale irradiation cells are compared. The first one has the only large throughput slit nozzle, while the second one has numerous small nozzles arranged in parallel arrays for better overlap with laser beam. It is shown that the last one outperforms the former one significantly. We calculated that our experimental setup, provided argon is used as a carrier gas, can yield ∼50mg/hr of boron-10. It is interesting to compare this production rate with traditional method of industrial boron isotopes separation by low temperature distillation, Ref. In this method production rate is practically the same, but energy expenses per separated isotope are substantially smaller: ∼1 eV/atom instead of ∼10{sup 3} eV/atom as for SILARC method. The largest fraction of energy expenses in our SILARC-based method comes from compressor operation.

  13. Separate effects of the microkeratome incision and laser ablation on the eye's wave aberration.

    Science.gov (United States)

    Porter, Jason; MacRae, Scott; Yoon, Geunyoung; Roberts, Cynthia; Cox, Ian G; Williams, David R

    2003-08-01

    To study the optical changes induced by the microkeratome cut, the subsequent laser ablation, and the biomechanical healing response of the cornea in normal laser in situ keratomileusis (LASIK) eyes. Prospective randomized clinical trial. A Hansatome microkeratome was used to cut a corneal flap in one eye (study eye) of 17 normal myopic patients and a subsequent laser ablation was performed 2 months after this initial microkeratome incision. Control eyes received conventional LASIK treatments at the latter time point. The wave aberration of both the study and contralateral control eyes were measured over a 6-mm pupil with a Shack-Hartmann wavefront sensor for all preoperative, postflap cut, and postablation visits. The eye's higher order aberrations had a small, but significant increase (P =.03) of approximately 30% 2 months after cutting a flap. No systematic changes were observed in nearly all Zernike coefficients from their preoperative levels at 2 months postflap cut. A significant difference between the study and control eyes was observed for one trefoil mode, Z(3)(3) (P =.04). There was a wide variation in the response of individual Zernike modes across patients after cutting a flap. The majority of spherical aberration induced by the LASIK procedure seems to be due to the laser ablation and not the microkeratome cut. In addition, the total and higher order root mean square of wavefront errors were nearly identical for both the study and control eyes 3-months after the laser ablation, indicating that a procedure in which the incision and the ablation are separated in time to better control aberrations does not compromise the outcome of a conventional LASIK treatment.

  14. Feasibility of Machine Learning Methods for Separating Wood and Leaf Points from Terrestrial Laser Scanning Data

    Science.gov (United States)

    Wang, D.; Hollaus, M.; Pfeifer, N.

    2017-09-01

    Classification of wood and leaf components of trees is an essential prerequisite for deriving vital tree attributes, such as wood mass, leaf area index (LAI) and woody-to-total area. Laser scanning emerges to be a promising solution for such a request. Intensity based approaches are widely proposed, as different components of a tree can feature discriminatory optical properties at the operating wavelengths of a sensor system. For geometry based methods, machine learning algorithms are often used to separate wood and leaf points, by providing proper training samples. However, it remains unclear how the chosen machine learning classifier and features used would influence classification results. To this purpose, we compare four popular machine learning classifiers, namely Support Vector Machine (SVM), Na¨ıve Bayes (NB), Random Forest (RF), and Gaussian Mixture Model (GMM), for separating wood and leaf points from terrestrial laser scanning (TLS) data. Two trees, an Erytrophleum fordii and a Betula pendula (silver birch) are used to test the impacts from classifier, feature set, and training samples. Our results showed that RF is the best model in terms of accuracy, and local density related features are important. Experimental results confirmed the feasibility of machine learning algorithms for the reliable classification of wood and leaf points. It is also noted that our studies are based on isolated trees. Further tests should be performed on more tree species and data from more complex environments.

  15. FEASIBILITY OF MACHINE LEARNING METHODS FOR SEPARATING WOOD AND LEAF POINTS FROM TERRESTRIAL LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    D. Wang

    2017-09-01

    Full Text Available Classification of wood and leaf components of trees is an essential prerequisite for deriving vital tree attributes, such as wood mass, leaf area index (LAI and woody-to-total area. Laser scanning emerges to be a promising solution for such a request. Intensity based approaches are widely proposed, as different components of a tree can feature discriminatory optical properties at the operating wavelengths of a sensor system. For geometry based methods, machine learning algorithms are often used to separate wood and leaf points, by providing proper training samples. However, it remains unclear how the chosen machine learning classifier and features used would influence classification results. To this purpose, we compare four popular machine learning classifiers, namely Support Vector Machine (SVM, Na¨ıve Bayes (NB, Random Forest (RF, and Gaussian Mixture Model (GMM, for separating wood and leaf points from terrestrial laser scanning (TLS data. Two trees, an Erytrophleum fordii and a Betula pendula (silver birch are used to test the impacts from classifier, feature set, and training samples. Our results showed that RF is the best model in terms of accuracy, and local density related features are important. Experimental results confirmed the feasibility of machine learning algorithms for the reliable classification of wood and leaf points. It is also noted that our studies are based on isolated trees. Further tests should be performed on more tree species and data from more complex environments.

  16. The ISOLDE RILIS pump laser upgrade and the LARIS Laboratory

    CERN Document Server

    Marsh, B A; Fedorov, D V; Fedosseev, V N; Launila, O J; Lindroos, M; Losito, R; Osterdahl, F K; Pauchard, T; Pohjalainen, I T; Sassenberg, U; Seliverstov, M DSt. Petersburg, INP; Sjödin, A M; Tranströmer, G

    2010-01-01

    On account of its high efficiency, speed and unmatched selectivity, the Resonance Ionization Laser Ion Source (RILIS) is the preferred method for ionizing the nuclear reaction products at the ISOLDE on-line isotope separator facility. [...

  17. Proof-of-concept experiment for on-line laser induced breakdown spectroscopy analysis of impurity layer deposited on optical window and other plasma facing components of Aditya tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Maurya, Gulab Singh; Kumar, Rohit; Rai, Awadhesh Kumar, E-mail: awadheshkrai@rediffmail.com [Laser Spectroscopy Research Laboratory, Department of Physics, University of Allahabad, UP 211002 (India); Kumar, Ajai [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

    2015-12-15

    In the present manuscript, we demonstrate the design of an experimental setup for on-line laser induced breakdown spectroscopy (LIBS) analysis of impurity layers deposited on specimens of interest for fusion technology, namely, plasma-facing components (PFCs) of a tokamak. For investigation of impurities deposited on PFCs, LIBS spectra of a tokamak wall material like a stainless steel sample (SS304) have been recorded through contaminated and cleaned optical windows. To address the problem of identification of dust and gases present inside the tokamak, we have shown the capability of the apparatus to record LIBS spectra of gases. A new approach known as “back collection method” to record LIBS spectra of impurities deposited on the inner surface of optical window is presented.

  18. Robust polarization filter for separation of Lamb wave modes acquired using a 3D laser vibrometer

    Science.gov (United States)

    Ambroziński, Łukasz; Stepinski, Tadeusz

    2017-09-01

    Interpretation of signals related to Lamb waves propagation and scattering can rise serious difficulties due to the multi-modal nature of these waves. Different modes propagating with different velocities can be mixed up and hinder extraction of damage reflected components. As a feasible solution to this problem we propose a technique for separation of the propagating modes using a new type of polarization filter. The proposed directional polarization filter (DPF) can be applied if two components of particle movement, the in-plane and the out-of-plane, are available, for instance, from the measurement performed using laser vibrometer. The DPF is robust in the sense that it does not need a complete amplitude information of both components. Operation principle of the DPF is presented and illustrated by the simulated results in the form of B-scans obtained for an aluminum plate. The simulated results are verified by the experimental data obtained by processing the signals captured using a 3D laser vibrometer.

  19. Yb(3+) heavily doped photonic crystal fiber lasers prepared by the glass phase-separation technology.

    Science.gov (United States)

    Chu, Yingbo; Yang, Yu; Hu, Xiongwei; Chen, Zhangru; Ma, Yunxiu; Liu, Yongguang; Wang, Yibo; Liao, Lei; Xing, Yinbin; Li, Haiqing; Peng, Jinggagn; Dai, Nengli; Li, Jinyan; Yang, Luyun

    2017-10-02

    We report a Yb(3+) heavily doped photonic crystal fiber with 30 μm core diameter manufactured for the first time by an alternative technique. Silica core rods with a diameter of 3 mm and a length of 280 mm were prepared by the sodium-borosilicate glass phase-separation technology. The measurements show that the fiber has an Yb(3+) concentration of 22810 ppm by weight, and a resultant absorption of approximately 8.5 dB/m at 976 nm. The Yb(3+) ions are distributed throughout the fiber core with an excellent homogeneity. The laser performance demonstrates a high slope efficiency of 64.5% for laser emission at 1033.4 nm and a low power threshold of 3 W within a short fiber length of 1 m. This novel approach provides an alternative means of preparing large active silica rods with high doping levels and excellent material homogeneity for large mode area fibers with complex designs.

  20. TEM observation on phase separation and interfaces of laser surface alloyed high-entropy alloy coating.

    Science.gov (United States)

    Cai, Zhaobing; Cui, Xiufang; Jin, Guo; Liu, Zhe; Li, Yang; Dong, Meiling

    2017-12-01

    Phase separation is a common phenomenon in traditional alloys. Under the condition of appropriate undercooling, the segregation phenomenon can be also found in blue-chip high-entropy alloys (HEAs). In this work, the phase separation behavior and interfacial investigation of laser surface alloyed HEA coating with high content Ti were studied principally by transmission electron microscopy. The results show that crystal structure and elementary composition on both sides of the interface of coating/substrate are quite different, and the interfaces between different phases are incoherent or semi-coherent boundarys, resolved by high resolution transmission electron microscopy. In the interface of (Co, Ni)Ti 2 phase/β-Ti phase, there is angle of 80° between BCC〈100〉 and FCC〈201〉. An interesting 'island' structure, that β-Ti phases are embraced by (Co, Ni)Ti 2 compounds in the BCC matrix, was observed definitely, which is attributed to the combined action of Ti segregation and inter-attraction of Ti and other elements. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Testing relativity again, laser, laser, laser, laser

    NARCIS (Netherlands)

    Einstein, A.

    2015-01-01

    laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser, laser,

  2. Femtosecond laser ablated durable superhydrophobic PTFE films with micro-through-holes for oil/water separation: Separating oil from water and corrosive solutions

    Science.gov (United States)

    Yong, Jiale; Fang, Yao; Chen, Feng; Huo, Jinglan; Yang, Qing; Bian, Hao; Du, Guangqing; Hou, Xun

    2016-12-01

    Separating the mixture of water and oil by the superhydrophobic porous materials has attracted increasing research interests; however, the surface microstructures and chemical composition of those materials are easily destroyed in a harsh environment, resulting in materials losing the superhydrophobicity as well as the oil/water separation function. In this paper, a kind of rough microstructures was formed on polytetrafluoroethylene (PTFE) sheet by femtosecond laser treatment. The rough surfaces showed durable superhydrophobicity and ultralow water adhesion even after storing in various harsh environment for a long time, including strong acid, strong alkali, and high temperature. A micro-through-holes array was further generated on the rough superhydrophobic PTFE film by a subsequent mechanical drilling process. The resultant sample was successfully applied in the field of oil/water separation due to the inverse superhydrophobicity and superoleophilicity. The designed separation system is also very efficient to separate the mixtures of oil and corrosive acid/alkali solutions, exhibiting the strong potential for practical application.

  3. Determination of trace metal ions via on-line separation and preconcentration by means of chelating Sepharose beads in a sequential injection lab-on-valve (SI-LOV) system coupled to electrothermal atomic absorption spectrometric detection

    DEFF Research Database (Denmark)

    Long, Xiangbao; Hansen, Elo Harald; Miró, Manuel

    2005-01-01

    The analytical performance of an on-line sequential injection lab-on-valve (SI-LOV) system using chelating Sepharose beads as sorbent material for the determination of ultra trace levels of Cd(II), Pb(II) and Ni(II) by electrothermal atomic absorption spectrometry (ETAAS) is described and discussed....... The samples are adjusted to pH 5.0 on-line in the system for optimum operation. The target ions are adsorbed by chelation on the surface of the beads, contained in a 20 mul microcolumn within the LOV, and following elution by 50 mul 2M nitric acid, the eluate is, as sandwiched by air segments, introduced...

  4. Separated Transcriptomes of Male Gametophyte and Tapetum in Rice: Validity of a Laser Microdissection (LM) Microarray

    Science.gov (United States)

    Suwabe, Keita; Suzuki, Go; Takahashi, Hirokazu; Shiono, Katsuhiro; Endo, Makoto; Yano, Kentaro; Fujita, Masahiro; Masuko, Hiromi; Saito, Hiroshi; Fujioka, Tomoaki; Kaneko, Fumi; Kazama, Tomohiko; Mizuta, Yoko; Kawagishi-Kobayashi, Makiko; Tsutsumi, Nobuhiro; Kurata, Nori; Nakazono, Mikio; Watanabe, Masao

    2008-01-01

    In flowering plants, the male gametophyte, the pollen, develops in the anther. Complex patterns of gene expression in both the gametophytic and sporophytic tissues of the anther regulate this process. The gene expression profiles of the microspore/pollen and the sporophytic tapetum are of particular interest. In this study, a microarray technique combined with laser microdissection (44K LM-microarray) was developed and used to characterize separately the transcriptomes of the microspore/pollen and tapetum in rice. Expression profiles of 11 known tapetum specific-genes were consistent with previous reports. Based on their spatial and temporal expression patterns, 140 genes which had been previously defined as anther specific were further classified as male gametophyte specific (71 genes, 51%), tapetum-specific (seven genes, 5%) or expressed in both male gametophyte and tapetum (62 genes, 44%). These results indicate that the 44K LM-microarray is a reliable tool to analyze the gene expression profiles of two important cell types in the anther, the microspore/pollen and tapetum. PMID:18755754

  5. Low-level laser therapy effects on pain perception related to the use of orthodontic elastomeric separators

    Directory of Open Access Journals (Sweden)

    Rachel D'Aurea Furquim

    2015-06-01

    Full Text Available INTRODUCTION: Some patients refer to pre-banding orthodontic separation as a painful orthodontic procedure. Low-level laser therapy (LLLT has been reported to have local analgesic effect. OBJECTIVE: The aim of this single-blind study was to investigate the perception of pain caused by orthodontic elastomeric separators with and without a single LLLT application (6J. METHODS: The sample comprised 79 individuals aged between 13 and 34 years old at orthodontic treatment onset. Elastomeric separators were placed in first maxillary molars at mesial and distal surfaces and kept in place for three days. The volunteers scored pain intensity on a visual analogue scale (VAS after 6 and 12 hours, and after the first, second and third days. One third of patients received laser applications, whereas another third received placebo applications and the remaining ones were controls. Applications were performed in a split-mouth design. Thus, three groups (laser, placebo and control were assessed. RESULTS: No differences were found among groups considering pain perception in all periods observed. CONCLUSION: The use of a single-dose of LLLT did not cause significant reduction in orthodontic pain perception. Overall pain perception due to orthodontic separator placement varied widely and was usually mild.

  6. Implementation of suitable flow injection/sequential injection on-line sample pretreatment schemes. Separation and preconcentration procedures for the determination of trace metal concentrations by ETAAS and/or ICPMS

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Wang, Jianhua

    Despite their excellent analytical chemical capacities, ETAAS and ICPMS, nevertheless, often require suitable pretreatment of the sample material in order to obtain the necessary sensitivity and selectivity. Either in order to separate/preconcentrate the analyte material, or because of the presence...... of potentially interfering matrix constituents. Such pretreatments are advantageously performed in flow injection (FI) or sequential injection (SI) manifolds, where all appropriate unit operations can be effected under enclosed and strictly controlled conditions. Various separation/preconcentration procedures......, the ICPMS has potentially a larger volumetric capacity yet cannot accept organic solvents as these adversely will impair its performance. In the lecture, selected examples of separation/preconcentration FI/SI-procedures will be presented, with particular emphasis on the use of the novel “lab...

  7. Formación on line On line learning

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    2008-09-01

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.On line learning is a type of distance education based on new technologies. This article's aim is to introduce its main characteristics -asynchrony, non-presentiality, written communication, e-teacher role- as well as its challenges, risks, advantages and limitations. Differences between on line learning and face-to-face learning are presented in order to enable educational professionals to adapt their courses to the on line methodology. Planning and designing are introduced as key phases and, finally, useful concepts such as Virtual Learning Environment (VLE or Blended Learning (B-Learning are reviewed in order to achieve a better understanding of the on line learning field.

  8. Engineering Studies of a Pilot Plant for Laser Isotope Separation of CARBON-13 by Multiphoton Dissociation of Chlorodifluoromethane

    Science.gov (United States)

    Mehmetli, Bulent Ahmet

    Recent research in laser isotope separation by multiphoton dissociation (LISMPD) of ^{13 }C suggests that an LISMPD commercial process is more economical than the cryogenic CO distillation technology currently used to meet most of the world's ^ {13}C demand. In this dissertation, experimental studies of an engineering process for LISMPD of polyatomic molecules is examined. The experimental results have been obtained by MPD of chlorodifluoromethane (CF_2 HCl) to yield ^{13}C -enriched tetrafluoroethylene rm(C_2F _4). Emphasis is on research leading to the development of a practical chemical plant for the preparation of stable isotopes by this method. The experimental program has achieved the design, construction, and operation of a laboratory-scale ^{13}C separation apparatus and parametric dependences of enrichment factors and dissociated fractions. In this experiment, the reactant gas, industrial grade CF_2HCl, flows continuously along the axis of a stainless steel reaction cell. The beam of a commercial CO_2 TEA laser, delivering up to 3 J/pulse at a single wavelength, is focused into the cell to induce isotope-selective multiphoton dissociation. The ^{13}C-enriched reaction product, rm C_2F_4, is analyzed by mass spectroscopy for its isotopic content. Typical production rates of the setup are about 10 g/year ^{13}C at an enrichment of 15% or 1 g/year at an enrichment of 65%. The results of a detailed cost analysis, which takes into account different reaction conditions and laser types, showed that at production rates of 7,000 kg per year, the cost of ^{13}C can be as low as 4/g. This figure is about an order of magnitude less than the cost of ^13 C obtained by cryogenic distillation of CO. The design, construction, and operation of a CO _2 MOPA (Master Oscillator/ Power Amplifier) laser is proposed because a MOPA combines the advantages of favorable isotope separation reaction conditions of TEA lasers and the cheaper photons of cw discharges. Analytical

  9. Uranium enrichment using laser and plasma separation - an analysis focussing on export control; Urananrikning med laser och plasmaseparation - en analys med fokus paa exportkontroll

    Energy Technology Data Exchange (ETDEWEB)

    Oliver, Lena; Wilhelmsen, Katarina; Wirstam, Jens (Swedish Defence Research Agency, FOI, Stockholm (SE))

    2007-07-01

    The Swedish Defence Research Agency, FOI, has under contract work financed by the Swedish Nuclear Power Inspectorate, SKI, performed a study on uranium enrichment by laser-based processes and plasma separation. None of these processes are at present used on an industrial scale for uranium enrichment. However, these are processes of high efficiency which implicates that plants employing any of these processes for production of fissile material for nuclear weapons can be small in size and easily hidden. This has also been the case for laser enrichment. Special emphasis has been put on the understanding of the governing physical principles of the different processes. In the report the AVLIS and MLIS processes are described in some detail while CRISLA and SILEX are treated in less detail. The plasma separation process is described in a separate section. Limiting physical parameters for the different processes are discussed and equipment relevant to the different technologies is described. Further, some indicators of the different processes are identified and listed. In the final chapter known research programs where these processes have been used are listed. Since none of the described technologies has been used on an industrial scale, information on plant design and running is scarce

  10. Ultra-fast Laser Synthesis of Nanopore Arrays in Silicon for Bio-molecule Separation and Detection

    Energy Technology Data Exchange (ETDEWEB)

    Tringe, J W; Ileri, N; Letant, S E; Stroeve, P; Shirk, M; Zaidi, S; Balhorn, R L; Siders, C W

    2008-02-07

    We demonstrate that interference of ultra-fast pulses of laser light can create regular patterns in thin silicon membranes that are compatible with the formation of a uniform array of nanopores. The spacing and size of these pores can be tuned by changing the laser energy, wavelength and number of ultra-short pulses. Short pulses and wavelengths ({approx}550 nm and smaller) are needed to define controllable nanoscale features in silicon. Energy must be localized in time and space to produce the etching, ablation or amorphization effects over the {approx}100 nm length scales appropriate for definition of single pores. Although in this brief study pattern uniformity was limited by laser beam quality, a complementary demonstration reported here used continuous-wave interferometric laser exposure of photoresist to show the promise of the ultra-fast approach for producing uniform pore arrays. The diameters of these interferometrically-defined features are significantly more uniform than the diameters of pores in state-of-the-art polycarbonate track etch membranes widely used for molecular separations.

  11. Separation of seven arsenic compounds by high performance liquid chromatography with on-line detection by hydrogen-argon flame atomic absorption spectrometry and inductively coupled plasma mass spectrometry

    DEFF Research Database (Denmark)

    Hansen, S. H.; Larsen, Erik Huusfeldt; Pritzl, G.

    1992-01-01

    the HPLC column to the nebulizer of the atomic absorption spectrometer. Arsenite, arsenate, monomethylarsonate (MMA) and dimethylarsinate (DMA) were separated from each other and from the co-injected cationic arsenic compounds, arsenobetaine (AsB), arsenocholine (AsC) and the tetramethylarsonium ion (TMAs...... of mixtures of arsenic standards into the HPLC system were: arsenite, As(III) 1.1; arsenate, As(V) 1.4; MMA 1.4; DMA 0.7; AsB 0.3; AsC 0.5; and the TMAs 0.4. The HPLC-AAS system was used for the analysis of arsenic species in aqueous extracts of soil samples from a polluted land site. Only arsenate was found...

  12. Separation of seven arsenic compounds by high-performance liquid chromatography with on-line detection by hydrogen–argon flame atomic absorption spectrometry and inductively coupled plasma mass spectrometry

    DEFF Research Database (Denmark)

    Hansen, S. H.; Larsen, E. H.; Pritzl, G.

    1992-01-01

    the HPLC column to the nebulizer of the atomic absorption spectrometer. Arsenite, arsenate, monomethylarsonate (MMA) and dimethylarsinate (DMA) were separated from each other and from the co-injected cationic arsenic compounds, arsenobetaine (AsB), arsenocholine (AsC) and the tetramethylarsonium ion (TMAs...... of mixtures of arsenic standards into the HPLC system were: arsenite, As(III) 1.1; arsenate, As(V) 1.4; MMA 1.4; DMA 0.7; AsB 0.3; AsC 0.5; and the TMAs 0.4. The HPLC-AAS system was used for the analysis of arsenic species in aqueous extracts of soil samples from a polluted land site. Only arsenate was found...

  13. CERN Video News on line

    CERN Multimedia

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  14. Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers

    Science.gov (United States)

    Kumkar, M.; Bauer, L.; Russ, S.; Wendel, M.; Kleiner, J.; Grossmann, D.; Bergner, K.; Nolte, S.

    2014-03-01

    We investigate cutting of transparent materials using ultra short laser pulses with pulse durations in the sub to a few ps regime. All compared methods base on nonlinear absorption including ablation cutting and cleaving or selective etching supported by laser induced modification inside the bulk material. For most of the experiments samples of hardened glass (Corning Gorilla®) with thickness up to 700 μm were used, ablation cutting of sapphire is presented additionally. Absorption and modification inside the volume is analyzed in detail, aiming for tailored modifications. Besides optical microscopy a pump probe setup was used. We show results of time resolved absorption measurements of 6 ps pulses focused into the volume. We observe shielding due to the interaction region and accumulation effects influencing the modifications. First results on inscribing and cutting by using beam shaping indicate the importance of tailoring the shape and arrangement of the pulses temporally and spatially. The results presented for the different cutting methods supports an assessment of the individual potential and a selection of the applicable method based on the requirements.

  15. On-line moisture analysis

    CERN Document Server

    Cutmore, N G

    2002-01-01

    Measurement of the moisture content of iron ore has become a key issue for controlling moisture additions for dust suppression. In most cases moisture content is still determined by manual or automatic sampling of the ore stream, followed by conventional laboratory analysis by oven drying. Although this procedure enables the moisture content to be routinely monitored, it is too slow for control purposes. This has generated renewed interest in on-line techniques for the accurate and rapid measurement of moisture in iron ore on conveyors. Microwave transmission techniques have emerged over the past 40 years as the dominant technology for on-line measurement of moisture in bulk materials, including iron ores. Alternative technologies have their limitations. Infra-red analysers are used in a variety of process industries, but rely on the measurement of absorption by moisture in a very thin surface layer. Consequently such probes may be compromised by particle size effects and biased presentation of the bulk mater...

  16. On-line survey method

    OpenAIRE

    Dvornáková, Táňa

    2008-01-01

    Thesis deals with modern ways of surveys using advancing information technology and internet which makes surveys using web applications more effective. After a short review of public opinion history the summary of principal czech and forign survey organizations engaged in determination of survey rules are presented. Thesis follows with description of classic and modern data collecting methods. Main attention is devoted to on-line survey method. The description of method, possibilities of real...

  17. Diccionario de neologismos on line

    OpenAIRE

    Institut Universitari de Lingstica Aplicada; Institut Universitari de Lingüística Aplicada

    2010-01-01

    El Diccionario de neologismos on line es una obra lexicográfica que recoge más de 4.000 neologismos en castellano documentados entre 1989 y 2007, mayoritariamente en prensa escrita. Los neologismos van acompañados de definición lexicográfica y varios contextos de uso, además de informaciones sobre la categoría grammatical, la fuente y fecha de procedencia, etc.

  18. Decay Study for the very Neutron-Rich Sn Nuclides, $^{135-140}$Sn Separated by Selective Laser Ionization

    CERN Multimedia

    2002-01-01

    %IS378 %title\\\\ \\\\ In this investigation, we wish to take advantage of chemically selective laser ionization to separate the very-neutron-rich Sn nuclides and determine their half-lives and delayed-neutron branches (P$_{n}$) using the Mainz $^{3}$He-delayed neutron spectrometer and close-geometry $\\gamma$-ray spectroscopy system. The $\\beta$-decay rates are dependent on a number of nuclear structure factors that may not be well described by models of nuclear structure developed for nuclides near stability. Determination of these decay properties will provide direct experimental data for r-process calculations and test the large number of models of nuclear structure for very-neutron rich Sn nuclides now in print.

  19. Managing SEMP on-line

    Energy Technology Data Exchange (ETDEWEB)

    Watson, L.E.; Luppens, J.C. [Phillips Petroleum, Lafayette, LA (United States); Johnson, S.T. [M and H Enterprises, Inc., Lafayette, LA (United States)

    1998-12-31

    The North America Production Division of Phillips Petroleum Company has teamed with M and H Enterprises to provide its operators, technicians, engineers and management on-line access and control of the change process and the extensive documentation involved in compliance with API RP 75 Safety and Environmental Management Program (SEMP). M and H Enterprises developed the WinPSM/SEMP{trademark} software and customized it to meet Phillips` SEMP policies and software standards. WinPSM/SEMP is a Windows based client server application, which features the use of a state of the art document management software technology. This system addresses all the elements of SEMP with the all important Management of Change module as a cornerstone component to the program. This paper presents the benefits of an on-line system over the traditional paper based system to control documentation resulting from SEMP compliance. It will demonstrate how this solution has resulted in a streamlined management of change process, safety training has become more current, and safety related procedures have become more accessible to the employees and better documented for compliance reporting purposes. The paper will point out the effectiveness of integrating all elements of SEMP into a single software product, taking advantage of familiar workplace environments to speed up the learning curve for field personnel. It will also address the flexibility of using such a system to include other on-line applications that have similar database accessibility requirements between the field and the supporting office.

  20. On-the-Fly Cross Flow Laser Guided Separation of Aerosol Particles Based on Size, Refractive Index and Density-Theoretical Analysis

    Science.gov (United States)

    2010-12-20

    between spores of Bacillus anthracis and its close relative, Bacillus thuringiensis ,” Anal. Chem. 78(9), 3221–3225 (2006). 28. R. B. Fair, A...On-the-fly cross flow laser guided separation of aerosol particles based on size , refractive index and density–theoretical analysis A. A. Lall...between particles and photons constituting the laser radiation. Particles can experience different optical forces depending on their size and/or optical

  1. Methods and results for calibration and track separation of a GEM based TPC using an UV-laser

    Energy Technology Data Exchange (ETDEWEB)

    Ball, Markus

    2008-12-15

    In the last 30 years high energy physics could write an impressive story of success. Since the introduction of the Standard Model (SM), it has met every experimental test. However the final confirmation has to prove the mechanism of electroweak symmetry breaking, which could not be confirmed yet. The most favored theory, which includes the introduction of a Higgs field, could not be verified experimentally. Furthermore there is clear evidence, that the SM is only a low energy description of nature and its principles, as the SM describes only 4 % of the known matter in the universe. There are two different approaches in accelerator driven high energy physics to clarify the open questions. The Large Hadron Collider (LHC) have a good opportunity to measure some of the missing pieces with its high center of mass energy. The International Linear Collider (ILC) will then measure their parameters with high precision. To guarantee this high precision the detectors have to be able to identify every single particle and determine its properties with high accuracy. These high requirements to the single detectors as well as the interconnectivity between all detectors are summarised by the concept of particle flow (PFLOW). This means that all particles must be separable, which includes in particular the main tracking device. A possible candidate for the central tracking device is a Time Projection Chamber (TPC). In this work a TPC with Gas Electron Multipliers (GEM) as gas amplification system was used. The GEMs replace the conventional wire amplification system of the TPC. In this PhD work a method to determine the drift velocity of a TPC was developed and tested using an ultraviolet laser. To ensure a high accuracy of the method all relevant gas parameters were measured with a slow control system. Furthermore the laser was used to investigate the separation capability of nearby tracks. Therefore an existing TPC prototype, which was developed to operate in a 5 T magnet facility

  2. Current developments with TRIUMF’s titanium-sapphire laser based resonance ionization laser ion source

    Energy Technology Data Exchange (ETDEWEB)

    Lassen, J., E-mail: LASSEN@triumf.ca; Li, R. [TRIUMF (Canada); Raeder, S. [GSI Helmholtzzentrum für Schwerionenforschung GmbH (Germany); Zhao, X.; Dekker, T. [TRIUMF (Canada); Heggen, H. [GSI Helmholtzzentrum für Schwerionenforschung GmbH (Germany); Kunz, P.; Levy, C. D. P.; Mostanmand, M.; Teigelhöfer, A.; Ames, F. [TRIUMF (Canada)

    2017-11-15

    Developments at TRIUMF’s isotope separator and accelerator (ISAC) resonance ionization laser ion source (RILIS) in the past years have concentrated on increased reliability for on-line beam delivery of radioactive isotopes to experiments, as well as increasing the number of elements available through resonance ionization and searching for ionization schemes with improved efficiency. The current status of these developments is given with a list of two step laser ionization schemes implemented recently.

  3. Current developments with TRIUMF's titanium-sapphire laser based resonance ionization laser ion source. An overview

    Science.gov (United States)

    Lassen, J.; Li, R.; Raeder, S.; Zhao, X.; Dekker, T.; Heggen, H.; Kunz, P.; P. Levy, C. D.; Mostanmand, M.; Teigelhöfer, A.; Ames, F.

    2017-11-01

    Developments at TRIUMF's isotope separator and accelerator (ISAC) resonance ionization laser ion source (RILIS) in the past years have concentrated on increased reliability for on-line beam delivery of radioactive isotopes to experiments, as well as increasing the number of elements available through resonance ionization and searching for ionization schemes with improved efficiency. The current status of these developments is given with a list of two step laser ionization schemes implemented recently.

  4. Influence of Microfield Directionality on Line Shapes

    Directory of Open Access Journals (Sweden)

    Annette Calisti

    2014-06-01

    Full Text Available In the framework of the Spectral Line Shapes in Plasmas Code Comparison Workshop (SLSP, large discrepancies appeared between the different approaches to account for ion motion effects in spectral line shape calculations. For a better understanding of these effects, in the second edition of the SLSP in August, 2013, two cases were dedicated to the study of the ionic field directionality on line shapes. In this paper, the effects of the direction and magnitude fluctuations are separately analyzed. The effects of two variants of electric field models, (i a pure rotating field with constant magnitude and (ii a time-dependent magnitude field in a given direction, together with the effects of the time-dependent ionic field on shapes of the He II Lyman-α and -β lines for different densities and temperatures, are discussed.

  5. First on-line test of SHIPTRAP

    CERN Document Server

    Sikler, G; Attallah, F; Beck, D; Dilling, J; Elisseev, S A; Geissel, H; Habs, D; Heinz, S; Herfurth, F; Hessberger, F P; Hofmann, S; Kluge, H J; Kozhuharov, C; Marx, G; Mukherjee, M; Neumayr, J; Plass, W R; Quint, W; Rahaman, S; Rodríguez, D; Scheidenberger, C; Tarisien, M; Thirolf, P; Varentsov, V; Weber, C; Zhou, Z

    2003-01-01

    The ion trap facility SHIPTRAP is installed behind the separator for heavy ion reaction products (SHIP) at GSI, which is well known for the discovery of new super-heavy elements produced in cold fusion reactions. SHIPTRAP consists out of a gas cell for stopping the recoil ions delivered by SHIP and two linear radio frequency quadrupole (RFQ) structures for cooling and accumulating the ions. In a first Penning trap the radionuclides of interest get further cooled and isobaric contaminants are removed. The second Penning trap is intended for high-precision mass measurements or identification of the stored ions before providing them to further downstream experiments. During a first on-line experiment in 2001, ions from SHIP were stopped in the gas cell and transferred into the RFQ structures. Accumulation and cooling could be demonstrated.

  6. On-line chemical composition analyzer development

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, M.J.; Garrison, A.A.; Muly, E.C.; Moore, C.F.

    1992-02-01

    The energy consumed in distillation processes in the United States represents nearly three percent of the total national energy consumption. If effective control of distillation columns can be accomplished, it has been estimated that it would result in a reduction in the national energy consumption of 0.3%. Real-time control based on mixture composition could achieve these savings. However, the major distillation processes represent diverse applications and at present there does not exist a proven on-line chemical composition sensor technology which can be used to control these diverse processes in real-time. This report presents a summary of the findings of the second phase of a three phase effort undertaken to develop an on-line real-time measurement and control system utilizing Raman spectroscopy. A prototype instrument system has been constructed utilizing a Perkin Elmer 1700 Spectrometer, a diode pumped YAG laser, two three axis positioning systems, a process sample cell land a personal computer. This system has been successfully tested using industrially supplied process samples to establish its performance. Also, continued application development was undertaken during this Phase of the program using both the spontaneous Raman and Surface-enhanced Raman modes of operation. The study was performed for the US Department of Energy, Office of Industrial Technologies, whose mission is to conduct cost-shared R D for new high-risk, high-payoff industrial energy conservation technologies. Although this document contains references to individual manufacturers and their products, the opinions expressed on the products reported do not necessarily reflect the position of the Department of Energy.

  7. Molecular dynamics investigation of desorption and ion separation following picosecond infrared laser (PIRL) ablation of an ionic aqueous protein solution.

    Science.gov (United States)

    Zou, J; Wu, C; Robertson, W D; Zhigilei, L V; Miller, R J D

    2016-11-28

    Molecular dynamics simulations were performed to characterize the ablation process induced by a picosecond infrared laser (PIRL) operating in the regime of desorption by impulsive vibrational excitation (DIVE) of a model peptide (lysozyme)/counter-ion system in aqueous solution. The simulations were performed for ablation under typical experimental conditions found within a time-of-flight mass spectrometer (TOF-MS), that is in vacuum with an applied electric field (E = ± 10(7) V/m), for up to 2 ns post-ablation and compared to the standard PIRL-DIVE ablation condition (E = 0 V/m). Further, a simulation of ablation under an extreme field condition (E = 10(10) V/m) was performed for comparison to extend the effective dynamic range of the effect of the field on charge separation. The results show that the plume dynamics were retained under a typical TOF-MS condition within the first 1 ns of ablation. Efficient desorption was observed with more than 90% of water molecules interacting with lysozyme stripped off within 1 ns post-ablation. The processes of ablation and desolvation of analytes were shown to be independent of the applied electric field and thus decoupled from the ion separation process. Unlike under the extreme field conditions, the electric field inside a typical TOF-MS was shown to modify the ions' motion over a longer time and in a soft manner with no enhancement to fragmentation observed as compared to the standard PIRL-DIVE. The study indicates that the PIRL-DIVE ablation mechanism could be used as a new, intrinsically versatile, and highly sensitive ion source for quantitative mass spectrometry.

  8. Molecular dynamics investigation of desorption and ion separation following picosecond infrared laser (PIRL) ablation of an ionic aqueous protein solution

    Science.gov (United States)

    Zou, J.; Wu, C.; Robertson, W. D.; Zhigilei, L. V.; Miller, R. J. D.

    2016-11-01

    Molecular dynamics simulations were performed to characterize the ablation process induced by a picosecond infrared laser (PIRL) operating in the regime of desorption by impulsive vibrational excitation (DIVE) of a model peptide (lysozyme)/counter-ion system in aqueous solution. The simulations were performed for ablation under typical experimental conditions found within a time-of-flight mass spectrometer (TOF-MS), that is in vacuum with an applied electric field (E = ± 107 V/m), for up to 2 ns post-ablation and compared to the standard PIRL-DIVE ablation condition (E = 0 V/m). Further, a simulation of ablation under an extreme field condition (E = 1010 V/m) was performed for comparison to extend the effective dynamic range of the effect of the field on charge separation. The results show that the plume dynamics were retained under a typical TOF-MS condition within the first 1 ns of ablation. Efficient desorption was observed with more than 90% of water molecules interacting with lysozyme stripped off within 1 ns post-ablation. The processes of ablation and desolvation of analytes were shown to be independent of the applied electric field and thus decoupled from the ion separation process. Unlike under the extreme field conditions, the electric field inside a typical TOF-MS was shown to modify the ions' motion over a longer time and in a soft manner with no enhancement to fragmentation observed as compared to the standard PIRL-DIVE. The study indicates that the PIRL-DIVE ablation mechanism could be used as a new, intrinsically versatile, and highly sensitive ion source for quantitative mass spectrometry.

  9. [Study of the effect of heat source separation distance on plasma physical properties in laser-pulsed GMAW hybrid welding based on spectral diagnosis technique].

    Science.gov (United States)

    Liao, Wei; Hua, Xue-Ming; Zhang, Wang; Li, Fang

    2014-05-01

    In the present paper, the authors calculated the plasma's peak electron temperatures under different heat source separation distance in laser- pulse GMAW hybrid welding based on Boltzmann spectrometry. Plasma's peak electron densities under the corresponding conditions were also calculated by using the Stark width of the plasma spectrum. Combined with high-speed photography, the effect of heat source separation distance on electron temperature and electron density was studied. The results show that with the increase in heat source separation distance, the electron temperatures and electron densities of laser plasma did not changed significantly. However, the electron temperatures of are plasma decreased, and the electron densities of are plasma first increased and then decreased.

  10. Solvent separating secondary metabolites directly from biosynthetic tissue for surface-assisted laser desorption ionisation mass spectrometry.

    Science.gov (United States)

    Rudd, David; Benkendorff, Kirsten; Voelcker, Nicolas H

    2015-03-16

    Marine bioactive metabolites are often heterogeneously expressed in tissues both spatially and over time. Therefore, traditional solvent extraction methods benefit from an understanding of the in situ sites of biosynthesis and storage to deal with heterogeneity and maximize yield. Recently, surface-assisted mass spectrometry (MS) methods namely nanostructure-assisted laser desorption ionisation (NALDI) and desorption ionisation on porous silicon (DIOS) surfaces have been developed to enable the direct detection of low molecular weight metabolites. Since direct tissue NALDI-MS or DIOS-MS produce complex spectra due to the wide variety of other metabolites and fragments present in the low mass range, we report here the use of "on surface" solvent separation directly from mollusc tissue onto nanostructured surfaces for MS analysis, as a mechanism for simplifying data annotation and detecting possible artefacts from compound delocalization during the preparative steps. Water, ethanol, chloroform and hexane selectively extracted a range of choline esters, brominated indoles and lipids from Dicathais orbita hypobranchial tissue imprints. These compounds could be quantified on the nanostructured surfaces by comparison to standard curves generated from the pure compounds. Surface-assisted MS could have broad utility for detecting a broad range of secondary metabolites in complex marine tissue samples.

  11. Two-photon interference of weak coherent laser pulses recalled from separate solid-state quantum memories.

    Science.gov (United States)

    Jin, Jeongwan; Slater, Joshua A; Saglamyurek, Erhan; Sinclair, Neil; George, Mathew; Ricken, Raimund; Oblak, Daniel; Sohler, Wolfgang; Tittel, Wolfgang

    2013-01-01

    Quantum memories allowing reversible transfer of quantum states between light and matter are central to quantum repeaters, quantum networks and linear optics quantum computing. Significant progress regarding the faithful transfer of quantum information has been reported in recent years. However, none of these demonstrations confirm that the re-emitted photons remain suitable for two-photon interference measurements, such as C-NOT gates and Bell-state measurements, which constitute another key ingredient for all aforementioned applications. Here, using pairs of laser pulses at the single-photon level, we demonstrate two-photon interference and Bell-state measurements after either none, one or both pulses have been reversibly mapped to separate thulium-doped lithium niobate waveguides. As the interference is always near the theoretical maximum, we conclude that our solid-state quantum memories, in addition to faithfully mapping quantum information, also preserve the entire photonic wavefunction. Hence, our memories are generally suitable for future applications of quantum information processing that require two-photon interference.

  12. Extraction, separation and characterization of endotoxins in water samples using solid phase extraction and capillary electrophoresis-laser induced fluorescence.

    Science.gov (United States)

    Fung, Fun Man; Su, Min; Feng, Hua-Tao; Li, Sam Fong Yau

    2017-09-07

    This study focuses on one of the key environmental threats, endotoxins, also known as lipopolysaccharides (LPS). A capillary electrophoresis method in combination with laser induced fluorescence (LIF) detection was developed for the analysis of endotoxins from 16 different bacterial strains. LPSs were derivatized with the amino-reactive fluorescent dye, fluorescein isothiocyanate (FITC), separated by capillary zone electrophoresis (CZE) under the optimized conditions with the use of 50 mM sodium tetraborate buffer (pH 9.30), and detected by LIF detector. To improve the sensitivity of CZE-LIF detection for the determination of trace amounts of endotoxins and to remove possible interference materials in environmental samples, a solid phase extraction (SPE) pre-concentration technique was applied successfully. The SPE targeted at polysaccharide moieties of LPSs and showed LPS enrichment effects too. CE migration time could also reveal the O-antigen chain lengths of LPSs. This CE method and SPE pretreatment showed linearity at 99.84%, and repeatabilities at 8.44% and 11.0% for endotoxins from E. Coli O55:B5 and E. Coli O26:B6. The limit of detection (LOD) could reach around 5 ng/mL at optimized condition. The method was applied successfully to the determination of LPS levels in tap water and wastewater, and demonstrated sensitive, reproducible and reliable results.

  13. Two-photon interference of weak coherent laser pulses recalled from separate solid-state quantum memories

    Science.gov (United States)

    Jin, Jeongwan; Slater, Joshua A.; Saglamyurek, Erhan; Sinclair, Neil; George, Mathew; Ricken, Raimund; Oblak, Daniel; Sohler, Wolfgang; Tittel, Wolfgang

    2013-08-01

    Quantum memories allowing reversible transfer of quantum states between light and matter are central to quantum repeaters, quantum networks and linear optics quantum computing. Significant progress regarding the faithful transfer of quantum information has been reported in recent years. However, none of these demonstrations confirm that the re-emitted photons remain suitable for two-photon interference measurements, such as C-NOT gates and Bell-state measurements, which constitute another key ingredient for all aforementioned applications. Here, using pairs of laser pulses at the single-photon level, we demonstrate two-photon interference and Bell-state measurements after either none, one or both pulses have been reversibly mapped to separate thulium-doped lithium niobate waveguides. As the interference is always near the theoretical maximum, we conclude that our solid-state quantum memories, in addition to faithfully mapping quantum information, also preserve the entire photonic wavefunction. Hence, our memories are generally suitable for future applications of quantum information processing that require two-photon interference.

  14. On-line process monitoring of coffee roasting by resonant laser ionisation time-of-flight mass spectrometry: bridging the gap from industrial batch roasting to flavour formation inside an individual coffee bean.

    Science.gov (United States)

    Hertz-Schünemann, R; Dorfner, R; Yeretzian, C; Streibel, T; Zimmermann, R

    2013-12-01

    Resonance-enhanced multiphoton ionisation time-of-flight mass spectrometry (REMPI-TOFMS) enables the fast and sensitive on-line monitoring of volatile organic compounds (VOC) formed during coffee roasting. On the one hand, REMPI-TOFMS was applied to monitor roasting gases of an industrial roaster (1500 kg/h capacity), with the aim of determining the roast degree in real-time from the transient chemical signature of VOCs. On the other hand, a previously developed μ-probe sampling device was used to analyse roasting gases from individual coffee beans. The aim was to explore fundamental processes at the individual bean level and link these to phenomena at the batch level. The pioneering single-bean experiments were conducted in two configurations: (1) VOCs formed inside a bean were sampled in situ, i.e. via a drilled μ-hole, from the interior, using a μ-probe (inside). (2) VOCs were sampled on-line in close vicinity of a single coffee bean's surface (outside). The focus was on VOCs originating from hydrolysis and pyrolytic degradation of chlorogenic acids, like feruloyl quinic acid and caffeoyl quinic acid. The single bean experiments revealed interesting phenomena. First, differences in time-intensity profiles between inside versus outside (time shift of maximum) were observed and tentatively linked to the permeability of the bean's cell walls material. Second, sharp bursts of some VOCs were observed, while others did exhibit smooth release curves. It is believed that these reflect a direct observation of bean popping during roasting. Finally, discrimination between Coffea arabica and Coffea canephora was demonstrated based on high-mass volatile markers, exclusively present in spectra of Coffea arabica. Copyright © 2013 John Wiley & Sons, Ltd.

  15. On-line data display

    Science.gov (United States)

    Lang, Sherman Y. T.; Brooks, Martin; Gauthier, Marc; Wein, Marceli

    1993-05-01

    A data display system for embedded realtime systems has been developed for use as an operator's user interface and debugging tool. The motivation for development of the On-Line Data Display (ODD) have come from several sources. In particular the design reflects the needs of researchers developing an experimental mobile robot within our laboratory. A proliferation of specialized user interfaces revealed a need for a flexible communications and graphical data display system. At the same time the system had to be readily extensible for arbitrary graphical display formats which would be required for data visualization needs of the researchers. The system defines a communication protocol transmitting 'datagrams' between tasks executing on the realtime system and virtual devices displaying the data in a meaningful way on a graphical workstation. The communication protocol multiplexes logical channels on a single data stream. The current implementation consists of a server for the Harmony realtime operating system and an application written for the Macintosh computer. Flexibility requirements resulted in a highly modular server design, and a layered modular object- oriented design for the Macintosh part of the system. Users assign data types to specific channels at run time. Then devices are instantiated by the user and connected to channels to receive datagrams. The current suite of device types do not provide enough functionality for most users' specialized needs. Instead the system design allows the creation of new device types with modest programming effort. The protocol, design and use of the system are discussed.

  16. Wide single-mode tuning in quantum cascade lasers with asymmetric Mach-Zehnder interferometer type cavities with separately biased arms

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Mei C., E-mail: meizheng@princeton.edu; Gmachl, Claire F. [Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Liu, Peter Q. [Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Institute of Quantum Electronics, ETH Zürich, 8093 Zürich (Switzerland); Wang, Xiaojun; Fan, Jen-Yu; Troccoli, Mariano [AdTech Optics, Inc., City of Industry, California 91748 (United States)

    2013-11-18

    We report on the experimental demonstration of a widely tunable single mode quantum cascade laser with Asymmetric Mach-Zehnder (AMZ) interferometer type cavities with separately biased arms. Current and, consequently, temperature tuning of the two arms of the AMZ type cavity resulted in a single mode tuning range of 20 cm{sup −1} at 80 K in continuous-wave mode operation, a ten-fold improvement from the lasers under a single bias current. In addition, we also observed a five fold increase in the tuning rate as compared to the AMZ cavities controlled by one bias current.

  17. Sensitive detection of Escherichia coli O157:H7 in food and water by immunomagnetic separation and solid-phase laser cytometry

    Science.gov (United States)

    Pyle, B. H.; Broadaway, S. C.; McFeters, G. A.

    1999-01-01

    Rapid, direct methods are needed to assess active bacterial populations in water and foods. Our objective was to determine the efficiency of bacterial detection by immunomagnetic separation (IMS) and the compatibility of IMS with cyanoditolyl tetrazolium chloride (CTC) incubation to determine respiratory activity, using the pathogen Escherichia coli O157:H7. Counterstaining with a specific fluorescein-conjugated anti-O157 antibody (FAb) following CTC incubation was used to allow confirmation and visualization of bacteria by epifluorescence microscopy. Broth-grown E. coli O157:H7 was used to inoculate fresh ground beef (laser cytometry. Enumeration by laser scanning permitted detection of ca. 10 CFU/g of ground beef or laser scanning cytometry gave results that compared favorably with plating following IMS.

  18. Quantized pulse separations of phase-locked soliton molecules in a dispersion-managed mode-locked Tm fiber laser at 2  μm.

    Science.gov (United States)

    Wang, Pan; Xiao, Xiaosheng; Yang, Changxi

    2017-01-01

    We report, for the first time to the best of our knowledge, the discovery of quantized pulse separations between phase-locked soliton pairs in a thulium-doped fiber laser at the wavelength range of 2 μm. The soliton pairs are formed by the nonlinear binding interaction between the solitons and dispersive waves, and the two lowest-order Kelly sidebands drive the interaction in these soliton pairs and fix the pulse separations of the soliton pairs to a discrete set of values. Our experimental observations are well confirmed by numerical simulations.

  19. Flexible control of femtosecond pulse duration and separation using an emittance-spoiling foil in x-ray free-electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Behrens, C. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Coffee, R. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Decker, F. -J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Emma, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Field, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Helml, W. [Technische Univ. Munchen, Garching (Germany); Huang, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Krejcik, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Krzywinski, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Loos, H. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Lutman, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Marinelli, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Maxwell, T. J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Turner, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-06-22

    We report experimental studies of generating and controlling femtosecond x-ray pulses in free-electron lasers (FELs) using an emittance spoiling foil. By selectivity spoiling the transverse emittance of the electron beam, the output pulse duration or double-pulse separation is adjusted with a variable size single or double slotted foil. Measurements were performed with an X-band transverse deflector located downstream of the FEL undulator, from which both the FEL lasing and emittance spoiling effects are observed directly.

  20. [Separation and identification of bovine lactoferricin by high performance liquid chromatography-matrix-assisted laser desorption/ionization time of flight/ time of flight mass spectrometry].

    Science.gov (United States)

    An, Meichen; Liu, Ning

    2010-02-01

    A high performance liquid chromatography-matrix-assisted laser desorption/ionization time of flight/time of flight mass spectrometry (HPLC-MALDI-TOF/TOF MS) method was developed for the separation and identification of bovine lactoferricin (LfcinB). Bovine lactoferrin was hydrolyzed by pepsin and then separated by ion exchange chromatography and reversed-phase liquid chromatography (RP-LC). The antibacterial activities of the fractions from RP-LC separation were determined and the protein concentration of the fraction with the highest activity was measured, whose sequence was indentified by MALDI-TOF/TOF MS. The relative molecular mass of LfcinB was 3 124.89 and the protein concentration was 18.20 microg/mL. The method of producing LfcinB proposed in this study has fast speed, high accuracy and high resolution.

  1. On-Line Metrology with Conoscopic Holography: Beyond Triangulation

    Science.gov (United States)

    Álvarez, Ignacio; Enguita, Jose M.; Frade, María; Marina, Jorge; Ojea, Guillermo

    2009-01-01

    On-line non-contact surface inspection with high precision is still an open problem. Laser triangulation techniques are the most common solution for this kind of systems, but there exist fundamental limitations to their applicability when high precisions, long standoffs or large apertures are needed, and when there are difficult operating conditions. Other methods are, in general, not applicable in hostile environments or inadequate for on-line measurement. In this paper we review the latest research in Conoscopic Holography, an interferometric technique that has been applied successfully in this kind of applications, ranging from submicrometric roughness measurements, to long standoff sensors for surface defect detection in steel at high temperatures. PMID:22399984

  2. On-line SPE-CE for the determination of insulin derivatives in biological fluids

    NARCIS (Netherlands)

    Visser, N.F.C.; van Harmelen, M.; Lingeman, H.; Irth, H.

    2003-01-01

    An on-line SPE-CE system is described for the determination of insulin derivatives in urine, serum and plasma. By combining techniques based on different separation mechanisms, in this case reversed-phase SPE and CE, a more selective sample clean-up is obtained. The described on-line SPE-CE

  3. Evaluation of accuracy of photogrammetric methods and laser scanning for measuring of parameters of cracks natural separateness

    Directory of Open Access Journals (Sweden)

    Sobolevskyi R.V.

    2016-04-01

    Full Text Available The modern approach of evaluation of errors of surface digital photogrammetric survey is considered. The possibilities of taking into account the impact of error of the system of treatment of digital representation and parameters of digital matrix on exactness of determination of actual coordinates of points are considered. The methods of quality assessment identifying cracks on the results of photogrammetric surveys and the estimation accuracy of the length and area of cracks are offered. The calculations of theoretical step of scanning for different categories of cracks using laser scanners VZ-400, VZ-1000, VZ-4000 of the RIEGL Company are executed. The order of determination of limits of area of laser scanning is reasonably depending on the parameters of cracks and technical descriptions of the laser scanner. According to the results of the calculations the method of determining the optimal parameters of laser scanning for different types of cracks is proved. Reasonable rational directions of the use of digital surface photogrammetric surveys and laser scanning in the study of multilevel fractured deposits of minerals are substantiated.

  4. On-line job marketplaces: sucess strategy

    OpenAIRE

    Sarapulov, Andrey

    2010-01-01

    This master thesis is focused on freelance type work available though on-line marketplaces such as oDesk and ways to get hired. First chapter introduces on-line working and lead though the world statistics powered by oDesk. Numbers present working hours, geographical coverage and skills distribution. It makes reader familiar with advantages and disadvantages of freelancing. Second chapter is related to on-line job marketplaces, in particularly to oDesk (www.odesk.com). It focuses on pros and ...

  5. On-line chemical composition analyzer development

    Energy Technology Data Exchange (ETDEWEB)

    Garrison, A.A.

    1993-01-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  6. Silicon isotope separation utilizing infrared multiphoton dissociation of Si{sub 2}F{sub 6} irradiated with two-color CO{sub 2} laser light

    Energy Technology Data Exchange (ETDEWEB)

    Yokoyama, Atsushi; Ohba, Hironori; Hashimoto, Masashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ishii, Takeshi; Ohya, Akio [Nuclear Development Corp., Tokai, Ibaraki (Japan); Arai, Shigeyoshi [Hill Research Co. Ltd., Tokyo (Japan)

    2002-08-01

    Silicon isotope separation has been done by utilizing the Infrared Multiphoton Dissociation (IRMPD) of Si{sub 2}F{sub 6} irradiated with two-color CO{sub 2} laser lights. The two-color excitation method improved the separation efficiency keeping the high enrichment factors. For example, 99.74% of {sup 28}Si was obtained at 49.63% dissociation of Si{sub 2}F{sub 6} after the simultaneous irradiation of 200 pulses with 966.23 cm{sup -1} photons (0.084 J/cm{sup 2}) and 954.55 cm{sup -1} photons (0.658 J/cm{sup 2}), while 2000 pulses were needed to obtain 99.35% of {sup 28}Si at 35.6% dissociation in the case of only one-color irradiation at 954.55 cm{sup -1} (0.97 J/cm{sup 2}). (author)

  7. On-Line Acquisitions by LOLITA

    Directory of Open Access Journals (Sweden)

    Frances G. Spigai

    1970-12-01

    Full Text Available The on-line acquisition program (LOLITA in use at the Oregon State University Library is described in terms of development costs, equipment requirements, and overall design philosophy. In particular, the record format and content of records in the on-order file, and the on-line processing of these records (input, search, correction, output using a cathode ray tube display terminal are detailed.

  8. Escapist Motives for On-line Gaming and Strengthening of Weak Ties

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    Due to advances of technology including faster and ubiquitously ac-cessible Internet connection, on-line gaming have grown tremendously in the last couple of years. The aim of this paper is to investigate whether escapist mo-tives for playing games are linked to strengthening of weak ties through...... on-line gaming. The research investigates Facebook and other on-line games separate-ly. A surprising result is that while most of the investigated escapist motives are positively correlated with strengthening of weak ties, the mundane breaking motive is negatively correlated with strengthening...

  9. Lasers.

    Science.gov (United States)

    Passeron, T

    2012-12-01

    Lasers are a very effective approach for treating many hyperpigmented lesions. They are the gold standard treatment for actinic lentigos and dermal hypermelanocytosis, such as Ota nevus. Becker nevus, hyperpigmented mosaicisms, and lentigines can also be successfully treated with lasers, but they could be less effective and relapses can be observed. However, lasers cannot be proposed for all types of hyperpigmentation. Thus, freckles and café-au-lait macules should not be treated as the relapses are nearly constant. Due to its complex pathophysiology, melasma has a special place in hyperpigmented dermatoses. Q-switched lasers (using standard parameters or low fluency) should not be used because of consistent relapses and the high risk of post-inflammatory hyperpigmentation. Paradoxically, targeting the vascular component of the melasma lesion with lasers could have a beneficial effect. However, these results have yet to be confirmed. In all cases, a precise diagnosis of the type of hyperpigmentation is mandatory before any laser treatment, and the limits and the potential side effects of the treatment must be clearly explained to patients. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  10. [Lasers].

    Science.gov (United States)

    Passeron, T

    2012-11-01

    Lasers are a very effective approach for treating many hyperpigmented lesions. They are the gold standard treatment for actinic lentigos and dermal hypermelanocytosis, such as Ota nevus. Becker nevus, hyperpigmented mosaicisms, and lentigines can also be successfully treated with lasers, but they could be less effective and relapses can be observed. However, lasers cannot be proposed for all types of hyperpigmentation. Thus, freckles and café-au-lait macules should not be treated as the relapses are nearly constant. Due to its complex pathophysiology, melasma has a special place in hyperpigmented dermatoses. Q-switched lasers (using standard parameters or low fluency) should not be used because of consistent relapses and the high risk of post-inflammatory hyperpigmentation. Paradoxically, targeting the vascular component of the melasma lesion with lasers could have a beneficial effect. However, these results have yet to be confirmed. In all cases, a precise diagnosis of the type of hyperpigmentation is mandatory before any laser treatment, and the limits and the potential side effects of the treatment must be clearly explained to patients. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  11. Formación on line

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.

  12. On line routing per mobile phone

    DEFF Research Database (Denmark)

    Bieding, Thomas; Görtz, Simon; Klose, Andreas

    2009-01-01

    . Additionally it is of utmost importance that the employed communication system is suitable integrated with the firm’s enterprise application system and business processes. On basis of a case study, we describe in this paper a system that is cheap and easy to implement due to the use of simple mobile phones......On-line routing is concerned with building vehicle routes in an ongoing fashion in such a way that customer requests arriving dynamically in time are efficiently and effectively served. An indispensable prerequisite for applying on-line routing methods is mobile communication technology...

  13. DEVELOPMENT OF AN ON-LINE COAL WASHABILITY ANALYZER

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Miller; C.L. Lin; G.H. Luttrell; G.T. Adel; Barbara Marin

    2001-06-26

    Washability analysis is the basis for nearly all coal preparation plant separations. Unfortunately, there are no on- line techniques for determining this most fundamental of all coal cleaning information. In light of recent successes at the University of Utah, it now appears possible to determine coal washability on-line through the use of x-ray computed tomography (CT) analysis. The successful development of such a device is critical to the establishment of process control and automated coal blending systems. In this regard, Virginia Tech, Terra Tek Inc., and U.S. coal producers have joined with the University of Utah and to undertake the development of an X-ray CT-based on- line coal washability analyzer with financial assistance from DOE. Each project participant brought special expertise to the project in order to create a new dimension in coal cleaning technology. The project involves development of appropriate software and extensive testing/evaluation of well-characterized coal samples from operating coal preparation plants. Data collected to date suggest that this new technology is capable of serving as a universal analyzer that can not only provide washability analysis, but also particle size distribution analysis, ash analysis, and perhaps pyritic sulfur analysis.

  14. The new on-line Czech Food Composition Database.

    Science.gov (United States)

    Machackova, Marie; Holasova, Marie; Maskova, Eva

    2013-10-01

    The new on-line Czech Food Composition Database (FCDB) was launched on http://www.czfcdb.cz in December 2010 as a main freely available channel for dissemination of Czech food composition data. The application is based on a complied FCDB documented according to the EuroFIR standardised procedure for full value documentation and indexing of foods by the LanguaL™ Thesaurus. A content management system was implemented for administration of the website and performing data export (comma-separated values or EuroFIR XML transport package formats) by a compiler. Reference/s are provided for each published value with linking to available freely accessible on-line sources of data (e.g. full texts, EuroFIR Document Repository, on-line national FCDBs). LanguaL™ codes are displayed within each food record as searchable keywords of the database. A photo (or a photo gallery) is used as a visual descriptor of a food item. The application is searchable on foods, components, food groups, alphabet and a multi-field advanced search. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Modified diglycol-amides for actinide separation: solvent extraction and time-resolved laser fluorescence spectroscopy complexation studies

    Energy Technology Data Exchange (ETDEWEB)

    Wilden, A.; Modolo, G.; Lange, S.; Sadowski, F.; Bosbach, D. [Foschungszentrum Juelich GmbH, IEK-6, Juelich (Germany); Beele, B.B.; Panak, P.J. [Ruprecht-Karls-Universitaet Heidelberg, Physikalisch Chemisces Institut - PCI, Heidelberg (Germany); Karlsruher Institut fuer Technologie - INE, Karlsruhe (Germany); Skerencak-Frech, A.; Geist, A. [Karlsruher Institut fuer Technologie - INE, Karlsruhe (Germany); Iqbal, M. [University of Twente, Laboratory of Molecular Nanofabrication, Enschede (Netherlands); Department of Chemistry, University of Sargodha, Sargodha 40100 (Pakistan); Verboom, W. [University of Twente, Laboratory of Molecular Nanofabrication, Enschede (Netherlands)

    2013-07-01

    In this work, the back-bone of the diglycolamide-structure of the TODGA extractant was modified by adding one or two methyl groups to the central methylene carbon-atoms. The influence of these structural modifications on the extraction behavior of trivalent actinides and lanthanides and other fission products was studied in solvent extraction experiments. The addition of methyl groups to the central methylene carbon atoms leads to reduced distribution ratios, also for Sr(II). This reduced extraction efficiency for Sr(II) is beneficial for process applications, as the co-extraction of Sr(II) can be avoided, resulting in an easier process design. The use of these modified diglycol-amides in solvent extraction processes is discussed. Furthermore, the complexation of Cm(III) and Eu(III) to the ligands was studied using Time-Resolved-Laser-Fluorescence-Spectroscopy (TRLFS). The complexes were characterized by slope analysis and conditional stability constants were determined.

  16. JSCS – OnLine First

    Directory of Open Access Journals (Sweden)

    n/a

    2010-03-01

    Full Text Available The section “JSCS – OnLine First” at www.shd.org.rs/JSCS, starting March 1, 2010, and issue No. 3 of Vol. 75 (2010, displays peer reviewed and accepted articles to be published in the Journal of the Serbian Chemical Society. The articles are prepared for final technical work.When the final article is assigned to an issue of the Journal, the “JSCS – OnLine First” version will be removed from this section and will appear in the associated printed Journal issue and in the electronic form at the Journal’s Web Site.Please be aware that, although “JSCS – OnLine First” versions do not have all bibliographic details available yet, they can already be cited using the year of OnLine publication and the DOI as follows: Author(s, Article Title, Journal (Year, DOI. Printed (or electronic versions are to be cited in the usual way.Please consult the Journal’s reference style for the exact appearance of these elements, abbreviation of journal names and the use of punctuation..

  17. Educational On-Line Gaming Propensity

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana; Kirchner, Kathrin

    2014-01-01

    students’ willingness to participate in serious games for teaching/learning. Th is study investigates the relationship between students’ behavior on Facebook, Facebook games, and their attitude toward educational on-line games. Th e results of the study reveal that the early adopters of educational games...

  18. Educational On-line Gaming Propensity

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana; Kirchner, Kathrin

    2014-01-01

    students’ willingness to participate in serious games for teaching/learning. Th is study investigates the relationship between students’ behavior on Facebook, Facebook games, and their attitude toward educational on-line games. The results of the study reveal that the early adopters of educational games...

  19. GPS Separator

    CERN Multimedia

    2016-01-01

    Footage of the 70 degree ISOLDE GPS separator magnet MAG70 as well as the switchyard for the Central Mass and GLM (GPS Low Mass) and GHM (GPS High Mass) beamlines in the GPS separator zone. In the GPS20 vacuum sector equipment such as the long GPS scanner 482 / 483 unit, faraday cup FC 490, vacuum valves and wiregrid piston WG210 and WG475 and radiation monitors can also be seen. Also the RILIS laser guidance and trajectory can be seen, the GPS main beamgate switch box and the actual GLM, GHM and Central Beamline beamgates in the beamlines as well as the first electrostatic quadrupoles for the GPS lines. Close up of the GHM deflector plates motor and connections and the inspection glass at the GHM side of the switchyard.

  20. Liquid Phase Separation and the Aging Effect on Mechanical and Electrical Properties of Laser Rapidly Solidified Cu100−xCrx Alloys

    Directory of Open Access Journals (Sweden)

    Song-Hua Si

    2015-11-01

    Full Text Available Duplex structure Cu-Cr alloys are widely used as contact materials. They are generally designed by increasing the Cr content for the hardness improvement, which, however, leads to the unfavorable rapid increase of the electrical resistivity. The solidification behavior of Cu100−xCrx (x = 4.2, 25 and 50 in wt.% alloys prepared by laser rapid solidification is studied here, and their hardness and electrical conductivity after aging are measured. The results show that the Cu-4.2%Cr alloy has the most desirable combination of hardness and conductive properties after aging in comparison with Cu-25%Cr and Cu-50%Cr alloys. Very importantly, a 50% improvement in hardness is achieved with a simultaneous 70% reduction in electrical resistivity. The reason is mainly attributed to the liquid phase separation occurring in the Cu-4.2%Cr alloy, which introduces a large a

  1. Comparison of TiO₂ and ZnO solar cells sensitized with an indoline dye: time-resolved laser spectroscopy studies of partial charge separation processes.

    Science.gov (United States)

    Sobuś, Jan; Burdziński, Gotard; Karolczak, Jerzy; Idígoras, Jesús; Anta, Juan A; Ziółek, Marcin

    2014-03-11

    Time-resolved laser spectroscopy techniques in the time range from femtoseconds to seconds were applied to investigate the charge separation processes in complete dye-sensitized solar cells (DSC) made with iodide/iodine liquid electrolyte and indoline dye D149 interacting with TiO2 or ZnO nanoparticles. The aim of the studies was to explain the differences in the photocurrents of the cells (3-4 times higher for TiO2 than for ZnO ones). Electrochemical impedance spectroscopy and nanosecond flash photolysis studies revealed that the better performance of TiO2 samples is not due to the charge collection and dye regeneration processes. Femtosecond transient absorption results indicated that after first 100 ps the number of photoinduced electrons in the semiconductor is 3 times higher for TiO2 than for ZnO solar cells. Picosecond emission studies showed that the lifetime of the D149 excited state is about 3 times longer for ZnO than for TiO2 samples. Therefore, the results indicate that lower performance of ZnO solar cells is likely due to slower electron injection. The studies show how to correlate the laser spectroscopy methodology with global parameters of the solar cells and should help in better understanding of the behavior of alternative materials for porous electrodes for DSC and related devices.

  2. Escapist Motives for On-line Gaming and Strengthening of Weak Ties

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    Due to advances of technology including faster and ubiquitously accessible Internet connection, on-line gaming have grown tremendously in the last couple of years. The aim of this paper is to investigate whether escapist motives for playing games are linked to strengthening of weak ties through on......-line gaming. The research investigates Facebook and other on-line games separately. A surprising result is that while most of the investigated escapist motives are positively correlated with strengthening of weak ties, the mundane breaking motive is negatively correlated with strengthening of weak ties....

  3. On-Line Scheduling on Parallel Machines

    Science.gov (United States)

    1994-05-01

    Daniel D. Sleator Avrim Blum Russell Impagliazzo , UC San Diego ® 1994 Jiti Sgall This research was sponsored by the National Science Foundation under grant...Avrim Blum and Russell Impagliazzo . for many valuable discussions and encouragement in my work. Discussions with Howard Karloff about on- line...friendly place to work, and in particular the theory conmiu- nity was very inspiring. I have learned a lot from .Jeff Edmonds, Russell Impagliazzo , Pavel

  4. Rapid chemical separations

    CERN Document Server

    Trautmann, N

    1976-01-01

    A survey is given on the progress of fast chemical separation procedures during the last few years. Fast, discontinuous separation techniques are illustrated by a procedure for niobium. The use of such techniques for the chemical characterization of the heaviest known elements is described. Other rapid separation methods from aqueous solutions are summarized. The application of the high speed liquid chromatography to the separation of chemically similar elements is outlined. The use of the gas jet recoil transport method for nuclear reaction products and its combination with a continuous solvent extraction technique and with a thermochromatographic separation is presented. Different separation methods in the gas phase are briefly discussed and the attachment of a thermochromatographic technique to an on-line mass separator is shown. (45 refs).

  5. Separate Colors, Separate Minds.

    Science.gov (United States)

    Meyers, Michael; Nidiry, John P.

    2002-01-01

    Explains that racial separation causes cultural separation, and the way to improve race relations is to continue to move toward integration. Discusses the need to debunk race, examining racial issues in education. Highlights the importance of actively supporting integration and opposing separatism, explaining that for there to be social progress,…

  6. On-line determination of anions in pulp mills by capillary electrophoresis (CE); Tehdasoloissa tapahtuva anionien kapillaarielektroforeettinen on-line maeaeritys ja sen hyoedyntaeminen prosessivalvonnassa - MPKY 02

    Energy Technology Data Exchange (ETDEWEB)

    Kokkonen, R.; Holmberg, M.; Vainikka, V. [Finnish Pulp and Paper Research Institute, Espoo (Finland)

    1998-12-31

    The aim of the study was to set-up a process control system for on-line measurement of certain anions. Typical anions which forms precipitates in pulp and paper mills are oxalate, carbonate and sulphate. Thus it is important to develop a continuous process analyzing system to control concentration levels of this anions. For the preliminary tests of continuous determinations of chloride and sulphate anions in tap water a simple on-line system was build in KCL (The Finnish Pulp and Paper Research Institute) and connected to a capillary electroforesis apparatus. In the preliminary tests a chromate buffer (ph = 7.6) was used. Separation of chloride and sulphate was excellent but the stability of buffer was not good enough and it was usable only for few hours. After experimental studies VTT developed a stable capillary electrophoresis method based on mixed amine buffer and this was selected for an on-line method for determination of anions in process waters of the pulp and paper industry. In the preliminary on-line test (r = 20) repeatabilities of migration times of sulphate and chloride with the chromate buffer were < 5 % (RSD) and peak heights < 15 % (RSD). With the mixed amine buffer repeatabilities were better. The preliminary tests showed that it is possible to connect a capillary electrophoresis system to on-line measurements. For the moment no commercial on-line CE apparatus is available. (orig.)

  7. In-source laser spectroscopy developments at TRILIS-towards spectroscopy on actinium and scandium

    Energy Technology Data Exchange (ETDEWEB)

    Raeder, Sebastian, E-mail: raeder@triumf.ca; Dombsky, Marik; Heggen, Henning; Lassen, Jens; Quenzel, Thomas [TRIUMF, Canada' s National Laboratory for Nuclear and Particle Physics (Canada); Sjoedin, Marica [GANIL (France); Teigelhoefer, Andrea [TRIUMF, Canada' s National Laboratory for Nuclear and Particle Physics (Canada); Wendt, Klaus [Johannes Gutenberg-Universitaet Mainz, Institut fuer Physik (Germany)

    2013-04-15

    Resonance Ionization Laser Ion Sources (RILIS) have become a versatile tool for production and study of exotic nuclides at Isotope Separator On-Line (ISOL) facilities such as ISAC at TRIUMF. The recent development and addition of a grating tuned spectroscopy laser to the TRIUMF RILIS solid state laser system allows for wide range spectral scans to investigate atomic structures on short lived isotopes, e.g., those from the element actinium, produced in uranium targets at ISAC. In addition, development of new and improved laser ionization schemes for rare isotope production at ISAC is ongoing. Here spectroscopic studies on bound states, Rydberg states and autoionizing (AI) resonances on scandium using the existing off-line capabilities are reported. These results allowed to identify a suitable ionization scheme for scandium via excitation into an autoionizing state at 58,104 cm{sup - 1} which has subsequently been used for ionization of on-line produced exotic scandium isotopes.

  8. On-line inspection of textile geometries

    Science.gov (United States)

    Bahners, Thomas; Ringens, Werner; Schollmeyer, Eckhard

    1993-02-01

    Two examples of specific design philosophies for low-cost on-line inspection systems for textiles are described in this paper: The application of the moire-technique can heavily enhance the imaging of textile surfaces as a filter for the assessment of geometric variations of the textile `grating' with extremely simple algorithms for image analysis. Blinded for color shades triangulation sensors have been developed into powerful tools for fast profiling of textile surfaces. Curtailed for certain applications fiber optical modifications of the basic triangulation principle have been developed for aereal inspection.

  9. Total on-line purchasing system (TOPS)

    Energy Technology Data Exchange (ETDEWEB)

    Collins, N.

    1995-11-01

    The Information Management Division (IMD) at LLNL is developing a new purchasing system for the Procurement Department. The first major development of this new system is called, {open_quotes}Total On-Line Purchasing System{close_quotes} (TOPS). TOPS will help speed up the requisitioning process by having requisitions electronically entered by requesters and electronically sent to buyers to be put on Purchase Orders. The new purchasing system will use Electronic Commerce (EC)/Electronic Data Interchange (EDI), to help increase transaction flows for shipping notices, RFQs, Quotes, Purchase Orders, and Invoices. ANSI X.12 is the EDI standard that this new EC will use.

  10. RILIS laser room HD

    CERN Multimedia

    2016-01-01

    Footage of the RILIS laser room at ISOLDE. The Resonance Ionization Laser Ion Source (RILIS) is a chemically selective ion source which relies on resonant excitation of atomic transitions using tunable laser radiation. This video shows you the laser table with the different lenses and optics as well as an overview of the RILIS laser setup. It also shows laser light with different colors and operation by the RILIS laser experts. The last part of the video shows you the laser path from the RILIS laser room into the ISOLDE GPS separator room where it enters the GPS separator magnet.

  11. RILIS laser room

    CERN Multimedia

    2016-01-01

    Footage of the RILIS laser room at ISOLDE. The Resonance Ionization Laser Ion Source (RILIS) is a chemically selective ion source which relies on resonant excitation of atomic transitions using tunable laser radiation. This video shows you the laser table with the different lenses and optics as well as an overview of the RILIS laser setup. It also shows laser light with different colors and operation by the RILIS laser experts. The last part of the video shows you the laser path from the RILIS laser room into the ISOLDE GPS separator room where it enters the GPS separator magnet.

  12. A Refreshable, On-line Cache for HST Data Retrieval

    Science.gov (United States)

    Fraquelli, Dorothy A.; Ellis, Tracy A.; Ridgaway, Michael; DPAS Team

    2016-01-01

    We discuss upgrades to the HST Data Processing System, with an emphasis on the changes Hubble Space Telescope (HST) Archive users will experience. In particular, data are now held on-line (in a cache) removing the need to reprocess the data every time they are requested from the Archive. OTFR (on the fly reprocessing) has been replaced by a reprocessing system, which runs in the background. Data in the cache are automatically placed in the reprocessing queue when updated calibration reference files are received or when an improved calibration algorithm is installed. Data in the on-line cache are expected to be the most up to date version. These changes were phased in throughout 2015 for all active instruments.The on-line cache was populated instrument by instrument over the course of 2015. As data were placed in the cache, the flag that triggers OTFR was reset so that OTFR no longer runs on these data. "Hybrid" requests to the Archive are handled transparently, with data not yet in the cache provided via OTFR and the remaining data provided from the cache. Users do not need to make separate requests.Users of the MAST Portal will be able to download data from the cache immediately. For data not in the cache, the Portal will send the user to the standard "Retrieval Options Page," allowing the user to direct the Archive to process and deliver the data.The classic MAST Search and Retrieval interface has the same look and feel as previously. Minor changes, unrelated to the cache, have been made to the format of the Retrieval Options Page.

  13. Reumatismo On-line, one year after

    Directory of Open Access Journals (Sweden)

    P. Sfriso

    2011-09-01

    Full Text Available L’edizione On-line di Reumatismo ha compiuto un anno e pertanto crediamo che sia doveroso fare una breve analisi sui primi risultati ottenuti. Come era già stato precedentemente precisato, la creazione di un’edizione On-line rappresentava uno fra gli obiettivi più importanti della redazione di Reumatismo al momento del suo insediamento (1, 2. Ovviamente non era sufficiente, anche se necessario, fare in modo che l’iniziativa decollasse; bisognava poi cercare di farla espandere e sviluppare in modo qualificante. Per questo si dovevano aver ben precise le finalità. Cosa non semplice, soprattutto per chi non avesse molta consuetudine con tale linguaggio di comunicazione. Bisognava cercare di capire quali fossero le reali convenienze, soprattutto quelle specifiche per la nostra rivista. Molte serate delle nostre riunioni di redazione sono state spese per momenti di riflessione che sortivano pareri diversi, formulati a seconda della personalità e della cultura specifica sull’argomento di ognuno.

  14. On-line and Mobil Learning Activities

    Science.gov (United States)

    Ackerman, S. A.; Whittaker, T. M.; Jasmin, T.; Mooney, M. E.

    2012-12-01

    Introductory college-level science courses for non-majors are critical gateways to imparting not only discipline-specific information, but also the basics of the scientific method and how science influences society. They are also indispensable for student success to degree. On-line, web-based homework (whether on computers or mobile devices) is a rapidly growing use of the Internet and is becoming a major component of instruction in science, replacing delayed feedback from a few major exams. Web delivery and grading of traditional textbook-type questions is equally effective as having students write them out for hand grading, as measured by student performance on conceptual and problem solving exams. During this presentation we will demonstrate some of the interactive on-line activities used to teach concepts and how scientists approach problem solving, and how these activities have impacted student learning. Evaluation of the activities, including formative and summative, will be discussed and provide evidence that these interactive activities significantly enhance understanding of introductory meteorological concepts in a college-level science course. More advanced interactive activities are also used in our courses for department majors, some of these will be discussed and demonstrated. Bring your mobile devices to play along! Here is an example on teaching contouring: http://profhorn.aos.wisc.edu/wxwise/contour/index.html

  15. Enhanced capabilities for imaging gangliosides in murine brain with matrix-assisted laser desorption/ionization and desorption electrospray ionization mass spectrometry coupled to ion mobility separation.

    Science.gov (United States)

    Škrášková, Karolina; Claude, Emmanuelle; Jones, Emrys A; Towers, Mark; Ellis, Shane R; Heeren, Ron M A

    2016-07-15

    The increased interest in lipidomics calls for improved yet simplified methods of lipid analysis. Over the past two decades, mass spectrometry imaging (MSI) has been established as a powerful technique for the analysis of molecular distribution of a variety of compounds across tissue surfaces. Matrix-assisted laser desorption/ionization (MALDI) MSI is widely used to study the spatial distribution of common lipids. However, a thorough sample preparation and necessity of vacuum for efficient ionization might hamper its use for high-throughput lipid analysis. Desorption electrospray ionization (DESI) is a relatively young MS technique. In DESI, ionization of molecules occurs under ambient conditions, which alleviates sample preparation. Moreover, DESI does not require the application of an external matrix, making the detection of low mass species more feasible due to the lack of chemical matrix background. However, irrespective of the ionization method, the final information obtained during an MSI experiment is very complex and its analysis becomes challenging. It was shown that coupling MSI to ion mobility separation (IMS) simplifies imaging data interpretation. Here we employed DESI and MALDI MSI for a lipidomic analysis of the murine brain using the same IMS-enabled instrument. We report for the first time on the DESI IMS-MSI of multiply sialylated ganglioside species, as well as their acetylated versions, which we detected directly from the murine brain tissue. We show that poly-sialylated gangliosides can be imaged as multiply charged ions using DESI, while they are clearly separated from the rest of the lipid classes based on their charge state using ion mobility. This represents a major improvement in MSI of intact fragile lipid species. We additionally show that complementary lipid information is reached under particular conditions when DESI is compared to MALDI MSI. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. The Monitor System for the LHCb on-line farm

    CERN Document Server

    Bonifazi, F; Carbone, A; Galli, D; Gregori, D; Marconi, U; Peco, G; Vagnoni, V

    2005-01-01

    The aim of the LHCb on-line farm Monitor System is to keep under control all the working indicators which are relevant for the farm operation, and to set the appropriate alarms whenever an error or a critical condition comes up. Since the most stressing tasks of the farm are the data transfer and processing, relevant indicators includes the CPU and the memory load of the system, the network interface and the TCP/IP stack parameters, the rates of the interrupts raised by the network interface card and the detailed status of the running processes. The monitoring of computers’ physical conditions (temperatures, fan speeds and motherboard voltages) are the subject of a separate technical note, since they are accessed in a different way, by using the IPMI protocol.

  17. On-line control of the nonlinear dynamics for synchrotrons

    Directory of Open Access Journals (Sweden)

    J. Bengtsson

    2015-07-01

    Full Text Available We propose a simple approach to the on-line control of the nonlinear dynamics in storage rings, based on compensation of the nonlinear resonance driving terms using beam losses as the main indicator of the strength of a resonance. The correction scheme is built on the analysis of the resonance driving terms in first perturbative order and on the possibility of using independent power supplies in the sextupole magnets, which is nowadays present in many synchrotron light sources. Such freedom allows the definition of “smart sextupole knobs” attacking each resonance separately. The compensation scheme has been tested at the Diamond light source and proved to be effective in opening up the betatron tune space, resonance free, available to the electron beam and to improve the beam lifetime.

  18. On-line control of the nonlinear dynamics for synchrotrons

    Science.gov (United States)

    Bengtsson, J.; Martin, I. P. S.; Rowland, J. H.; Bartolini, R.

    2015-07-01

    We propose a simple approach to the on-line control of the nonlinear dynamics in storage rings, based on compensation of the nonlinear resonance driving terms using beam losses as the main indicator of the strength of a resonance. The correction scheme is built on the analysis of the resonance driving terms in first perturbative order and on the possibility of using independent power supplies in the sextupole magnets, which is nowadays present in many synchrotron light sources. Such freedom allows the definition of "smart sextupole knobs" attacking each resonance separately. The compensation scheme has been tested at the Diamond light source and proved to be effective in opening up the betatron tune space, resonance free, available to the electron beam and to improve the beam lifetime.

  19. Aprender a innovar: una experiencia on line

    Directory of Open Access Journals (Sweden)

    Joaquín MORENO MARCHAL

    2014-11-01

    Full Text Available La creatividad y la innovación se han convertido en recursos clave en la denominada sociedad del conocimiento, que bien podría ser también llamada sociedad de la innovación. Pero innovar es una actividad compleja, que integra la aplicación de múltiples capacidades, el pensamiento divergente y convergente, la gestión de equipos humanos, la comunicación. Ahora bien, a innovar se puede, y se debe, aprender. Aprender a innovar es un reto y también una obligación para el conjunto del sistema educativo en todos sus niveles. Partiendo de estas consideraciones este trabajo expone una experiencia de aprendizaje de la creatividad y de la innovación a través de un curso totalmente on line basado en la plataforma MOODLE, en el marco del Programa de Formación Permanente de la Universidad de Cádiz. Se presenta un modelo del proceso de innovación, denominado CREALAB, de elaboración propia. Este modelo se ha utilizado como base del proceso de aprendizaje de la creatividad y de la innovación y en el diseño del curso, está organizado en torno a actividades y tiene un carácter iterativo y realimentado. Se presentan además el conjunto del diseño metodológico y los resultados obtenidos en las dos ediciones celebradas hasta el momento. El diseño del curso totalmente on line y los resultados alcanzados permiten estimar un alto potencial de aplicación, tanto a nivel personal como a nivel organizacional.

  20. An ion guide laser ion source for isobar-suppressed rare isotope beams

    Energy Technology Data Exchange (ETDEWEB)

    Raeder, Sebastian, E-mail: sebastian.raeder@fys.kuleuven.be; Ames, Friedhelm; Bishop, Daryl; Bricault, Pierre; Kunz, Peter; Mjøs, Anders [TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia V6T 2A3 (Canada); Heggen, Henning, E-mail: heggen@triumf.ca [TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia V6T 2A3 (Canada); Institute of Applied Physics, TU Darmstadt, Schlossgartenstr. 7, 64289 Darmstadt (Germany); Lassen, Jens, E-mail: lassen@triumf.ca; Teigelhöfer, Andrea [TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia V6T 2A3 (Canada); Department of Physics and Astronomy, University of Manitoba, Winnipeg, Manitoba R3T 2N2 (Canada)

    2014-03-15

    Modern experiments at isotope separator on-line (ISOL) facilities like ISAC at TRIUMF often depend critically on the purity of the delivered rare isotope beams. Therefore, highly selective ion sources are essential. This article presents the development and successful on-line operation of an ion guide laser ion source (IG-LIS) for the production of ion beams free of isobaric contamination. Thermionic ions from the hot ISOL target are suppressed by an electrostatic potential barrier, while neutral radio nuclides effusing out are resonantly ionized by laser radiation within a quadrupole ion guide behind this barrier. The IG-LIS was developed through detailed thermal and ion optics simulation studies and off-line tests with stable isotopes. In a first on-line run with a SiC target a suppression of surface-ionized Na contaminants in the ion beam of up to six orders of magnitude was demonstrated.

  1. On-Line Impact Load Identification

    Directory of Open Access Journals (Sweden)

    Krzysztof Sekuła

    2013-01-01

    Full Text Available The so-called Adaptive Impact Absorption (AIA is a research area of safety engineering devoted to problems of shock absorption in various unpredictable scenarios of collisions. It makes use of smart technologies (systems equipped with sensors, controllable dissipaters and specialised tools for signal processing. Examples of engineering applications for AIA systems are protective road barriers, automotive bumpers or adaptive landing gears. One of the most challenging problems for AIA systems is on-line identification of impact loads, which is crucial for introducing the optimum real-time strategy of adaptive impact absorption. This paper presents the concept of an impactometer and develops the methodology able to perform real-time impact load identification. Considered dynamic excitation is generated by a mass M1 impacting with initial velocity V0. An analytical formulation of the problem, supported with numerical simulations and experimental verifications is presented. Two identification algorithms based on measured response of the impacted structure are proposed and discussed. Finally, a concept of the AIA device utilizing the idea of impactometer is briefly presented.

  2. SOL: INNOVACIÓN ON-LINE

    Directory of Open Access Journals (Sweden)

    Rubén Faúndez

    2007-11-01

    Full Text Available Las aplicaciones de simulación tienden a ser cada vez más cercanas a usuarios e industrias. Sin embargo, muchas de ellas no poseen ni la capacidad ni el conocimiento como para desarrollar internamente sus modelos de simulación. Por este motivo, y como una forma de apoyar la toma de decisiones basándose en modelos de simulación, se presenta la plataforma SOL (Simulación On Line. La metodología completa de trabajo, así como la interacción entre SOL, Empresa y Asesor, son presentadas. Su base de datos, los niveles de usuarios, sus funcionalidades, y la creación automatizada de información grafica y visual, también son explicadas. En el caso de aplicación, el uso de SOL para apoyar la toma de decisiones en una operación de movimiento de material, permite a los tomadores de decisión acceder a análisis robustos basados en información extraída de los modelos de simulación. SOL, al almacenar información, funcionar vía web, generar análisis automatizados y crear visualizaciones, permite cumplir con las expectativas de los usuarios respecto a una solución integral en simulación.

  3. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Oak Ridge Gaseous Diffusion Plant Site

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) technology, with the near-term goal to provide the necessary information to make a deployment decision by November 1992. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. A programmatic document for use in screening DOE sites to locate the U-AVLIS production plant was developed and implemented in two parts (Wolsko et al. 1991). The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were then subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the ORGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use, socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3. Following the site description and additional data requirements, Sec. 4 provides a short, qualitative assessment of potential environmental issues. 37 refs., 20 figs., 18 tabs.

  4. Laser-ablation electrospray ionization mass spectrometry with ion mobility separation reveals metabolites in the symbiotic interactions of soybean roots and rhizobia

    Energy Technology Data Exchange (ETDEWEB)

    Stopka, Sylwia A.; Agtuca, Beverly J.; Koppenaal, David W.; Pasa Tolic, Ljiljana; Stacey, Gary; Vertes, Akos; Anderton, Christopher R.

    2017-05-23

    Technologies enabling in situ metabolic profiling of living plant systems are invaluable for understanding physiological processes and could be used for rapid phenotypic screening (e.g., to produce plants with superior biological nitrogen fixing ability). The symbiotic interaction between legumes and nitrogen-fixing soil bacteria results in a specialized plant organ (i.e., root nodule), where the exchange of nutrients between host and endosymbiont occurs. Laser ablation electrospray ionization mass spectrometry (LAESI-MS) is a method that can be performed under ambient conditions requiring minimal sample preparation. Here, we employed LAESI-MS to explore the well-characterized symbiosis between soybean (Glycine max L. Merr.) and its compatible symbiont, Bradyrhizobium japonicum. The utilization of ion mobility separation (IMS) improved the molecular coverage, selectivity, and identification of the detected biomolecules. Specifically, incorporation of IMS resulted in an increase of 153 detected metabolites in the nodule samples. The data presented demonstrates the advantages of using LAESI-IMS-MS for the rapid analysis of intact root nodules, uninfected root segments, and free-living rhizobia. Untargeted pathway analysis revealed several metabolic processes within the nodule (e.g., zeatin, riboflavin, and purine synthesis). Compounds specific to the uninfected root and bacteria were also detected. Lastly, we performed depth-profiling of intact nodules to reveal the location of metabolites to the cortex and inside the infected region, and lateral profiling of sectioned nodules confirmed these molecular distributions. Our results established the feasibility of LAESI-IMS-MS for the analysis and spatial mapping of plant tissues, with its specific demonstration to improve our understanding of the soybean-rhizobial symbiosis.

  5. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site

    Energy Technology Data Exchange (ETDEWEB)

    Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3.

  6. A Distributed System for Learning Programming On-Line

    Science.gov (United States)

    Verdu, Elena; Regueras, Luisa M.; Verdu, Maria J.; Leal, Jose P.; de Castro, Juan P.; Queiros, Ricardo

    2012-01-01

    Several Web-based on-line judges or on-line programming trainers have been developed in order to allow students to train their programming skills. However, their pedagogical functionalities in the learning of programming have not been clearly defined. EduJudge is a project which aims to integrate the "UVA On-line Judge", an existing…

  7. On-line coloring of H-free bipartite graphs

    NARCIS (Netherlands)

    Broersma, Haitze J.; Capponi, A.; Paulusma, Daniël; Calamoneri, T.; Finocchi, I.; Italiano, G.F.

    2006-01-01

    We present a new on-line algorithm for coloring bipartite graphs. This yields a new upper bound on the on-line chromatic number of bipartite graphs, improving a bound due to Lovasz, Saks and Trotter. The algorithm is on-line competitive on various classes of $H$-free bipartite graphs, in particular

  8. Poss On-line (Personalisation of Self-Service Solutions across On-line platforms)

    DEFF Research Database (Denmark)

    Nielsen, Janni; Nielsen, Lene; Jespersen, Mikkel

    2005-01-01

    The project on Personalisation of Self-service Solutions across On-line Platforms (POSS ON-LINE) focuses on users, clients, and self-service solutions. It is based on the understanding that clients and users are different and have different goals, and that self-service takes place in different...... applications do not gather traces, and new ways of profiling the user is needed. To digitalise e.g. public services such as TOLD & SKAT to meet citizen's needs is a huge challenge because the user's context has to be taken into account. As the tracking tools are not sufficiently refined (1,4,14) pushing...... of information to users with the aim of increasing sales, e.g. AMAZON, still leaves much to be wished for. Despite the fact that the user profile, which the system generates, is continuously updated through user's interaction with the system (15), e.g. myyahoo.com. Personalised application may both service...

  9. Determination of anions with an on-line capillary electrophoresis method; Anionien on-line maeaeritys kapillaarielektroforeesilla - MPKT 10

    Energy Technology Data Exchange (ETDEWEB)

    Siren, H.; Saerme, T.; Kotiaho, T.; Hiissa, T.; Savolahti, P.; Komppa, V. [VTT Chemical Technology, Espoo (Finland)

    1998-12-31

    The aim of the study was to set-up an on-line capillary electrophoresis method for determination of anions in process waters of pulp and paper industry with exporting the results to the process control system of the mill. The quantification is important, since it will give information about the possible causes of precipitation. In recent years, the capillary electrophoresis (CE) due to its high separation efficiency has been shown as a method to take into consideration when analyzing chemical species ranging from small inorganic anions to different macromolecules. Many compounds are not easily detected in their native state, why analysis methods must be developed to improve their detection. Especially, small inorganic and organic anions which do not have chromophores are not sensitive enough for direct-UV detection. In such analyses the anions are mostly detected with indirect-UV technique. Capillary electrophoresis instruments are used to analyze samples in off-line, which seldom represent the situation in process. Therefore, on-line instrument technology with autoanalyzing settings will be needed in quality control. The development of a fully automatic capillary electrophoresis system is underway in co-operation with KCL (The Finnish Pulp and Paper Research Institute). In our research, we have first concentrated on the determination of sulphate in waters of paper industry. The method used for detection of sulphate is based on indirect-UV detection with CE, where the background electrolyte (BGE) is an absorbing mixture of secondary amines. The whole procedure for quantification of sulphate is performed within 15 minutes, after which a new sample is analyzed automatically. The only sample pretreatment is filtration, which is necessary before analysis. The concentrations of sulphate in process waters tested were between 300 and 800 ppm. Our tests show that a simultaneous determination of chloride, sulphate, nitrate, nitrite, sulphite, carbonate and oxalate is also

  10. EOS ODL Metadata On-line Viewer

    Science.gov (United States)

    Yang, J.; Rabi, M.; Bane, B.; Ullman, R.

    2002-12-01

    We have recently developed and deployed an EOS ODL metadata on-line viewer. The EOS ODL metadata viewer is a web server that takes: 1) an EOS metadata file in Object Description Language (ODL), 2) parameters, such as which metadata to view and what style of display to use, and returns an HTML or XML document displaying the requested metadata in the requested style. This tool is developed to address widespread complaints by science community that the EOS Data and Information System (EOSDIS) metadata files in ODL are difficult to read by allowing users to upload and view an ODL metadata file in different styles using a web browser. Users have the selection to view all the metadata or part of the metadata, such as Collection metadata, Granule metadata, or Unsupported Metadata. Choices of display styles include 1) Web: a mouseable display with tabs and turn-down menus, 2) Outline: Formatted and colored text, suitable for printing, 3) Generic: Simple indented text, a direct representation of the underlying ODL metadata, and 4) None: No stylesheet is applied and the XML generated by the converter is returned directly. Not all display styles are implemented for all the metadata choices. For example, Web style is only implemented for Collection and Granule metadata groups with known attribute fields, but not for Unsupported, Other, and All metadata. The overall strategy of the ODL viewer is to transform an ODL metadata file to a viewable HTML in two steps. The first step is to convert the ODL metadata file to an XML using a Java-based parser/translator called ODL2XML. The second step is to transform the XML to an HTML using stylesheets. Both operations are done on the server side. This allows a lot of flexibility in the final result, and is very portable cross-platform. Perl CGI behind the Apache web server is used to run the Java ODL2XML, and then run the results through an XSLT processor. The EOS ODL viewer can be accessed from either a PC or a Mac using Internet

  11. ISOLDE gets a new laser system

    CERN Document Server

    Anaïs Schaeffer

    2011-01-01

    It's action stations at ISOLDE, the On-Line Isotope Mass Separator at CERN. The Laboratory is preparing to add a second laser ion source system to its arsenal. By alternating between two laser systems, the ISOLDE team will be able to switch from one type of beam to another in record time.   Bruce Marsh, from the EN-STI Group, with one of the lasers from ISOLDE's current system. The first laser source for producing radioactive ion beams (see box) was installed in the ISOLDE hall in the 1990s. This method, which was highly innovative for its time, has since been adopted by several laboratories all over the world. "This laser system allows us to control the ionisation wavelength with precision and thus to select specific atoms in order to produce very pure radioactive ion beams," explains Valentin Fedosseev of the EN Department. "These beams are then used for various experiments, in nuclear astrophysics and biology, for example. With two laser systems we will be able to do ...

  12. Robust on-line monitoring of biogas processes; Robusta maettekniker on-line foer optimerad biogasproduktion

    Energy Technology Data Exchange (ETDEWEB)

    Nordberg, Aake; Hansson, Mikael; Kanerot, Mija; Krozer, Anatol; Loefving, Bjoern; Sahlin, Eskil

    2010-03-15

    Although demand for biomethane in Sweden is higher than ever, many Swedish codigestion plants are presently operated below their designed capacity. Efforts must be taken to increase the loading rate and guarantee stable operation and high availability of the plants. There are currently no commercial systems for on-line monitoring, and due to the characteristics of the material, including corrosion and tearing, robust applications have to be developed. The objective of this project was to identify and study different monitoring technologies with potential for on-line monitoring of both substrate mixtures and anaerobic digester content. Based on the prerequisites and demands at Boraas Energi och Miljoe AB's (BEMAB, the municipal energy and waste utility in the city of Boraas, Sweden) biogas plant, the extent of the problems, measurement variables and possible ways of managing these issues have been identified and prioritized. The substrate mixtures in question have a high viscosity and are inhomogeneous with variation in composition, which calls for further homogenization, dilution and filtration to achieve high precision in the necessary analyses. Studies of using different mixers and mills showed that the particle size (800 mum) needed for on-line COD measurement could not be achieved. The problem of homogenization can be avoided if indirect measurement methods are used. Laboratory tests with NIR (near-infra red spectroscopy) showed that VS can be predicted (R2=0,78) in the interval of 2-9% VS. Furthermore, impedance can give a measurement of soluble components. However, impedance is not sensitive enough to give a good measurement of total TS. Microwave technology was installed at the production plant and showed a faster response to changes in TS than the existing TS-sensor. However, due to technical problems, the evaluation only could be done during a limited period of ten days. BEMAB will continue the measurements and evaluation of the instrument. The

  13. Economic Analysis of On-Line Music: Choice Between On-Line and Traditional Music Shops

    OpenAIRE

    Takita, Toshiaki

    2006-01-01

    The aim of this paper is to analyze the interaction between on-line and traditional music shops in order to understand the economic changes taking place in the music market. Music has been enjoyed since the emergence of human civilization, but until very recently only live performances could be experienced. The record industry emerged less than 100 years ago, in 1910. Today we can play CDs and MDs, as well as records and cassettes, indoors or outdoors. Recently we have seen the invention of d...

  14. INTERACTIVE 3D LANDSCAPES ON LINE

    Directory of Open Access Journals (Sweden)

    B. Fanini

    2012-09-01

    Full Text Available The paper describes challenges identified while developing browser embedded 3D landscape rendering applications, our current approach and work-flow and how recent development in browser technologies could affect. All the data, even if processed by optimization and decimation tools, result in very huge databases that require paging, streaming and Level-of-Detail techniques to be implemented to allow remote web based real time fruition. Our approach has been to select an open source scene-graph based visual simulation library with sufficient performance and flexibility and adapt it to the web by providing a browser plug-in. Within the current Montegrotto VR Project, content produced with new pipelines has been integrated. The whole Montegrotto Town has been generated procedurally by CityEngine. We used this procedural approach, based on algorithms and procedures because it is particularly functional to create extensive and credible urban reconstructions. To create the archaeological sites we used optimized mesh acquired with laser scanning and photogrammetry techniques whereas to realize the 3D reconstructions of the main historical buildings we adopted computer-graphic software like blender and 3ds Max. At the final stage, semi-automatic tools have been developed and used up to prepare and clusterise 3D models and scene graph routes for web publishing. Vegetation generators have also been used with the goal of populating the virtual scene to enhance the user perceived realism during the navigation experience. After the description of 3D modelling and optimization techniques, the paper will focus and discuss its results and expectations.

  15. Why do People Stop playing On-Line Games?

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    2012-01-01

    practice, they would be in red numbers for several months already. This is most likely caused by people stopping to play their games. This paper provides an estimate of what proportion of people, who played on-line games, already stopped playing them. Additionally, it analyzed the reasons why people...... stopped playing on-line games. It also compares Facebook and other on-line games....

  16. Why do People Stop Playing On-Line Games?

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    2012-01-01

    practice, they would be in red numbers for several months already. This is most likely caused by people stopping to play their games. This paper provides an estimate of what proportion of people, who played on-line games, already stopped playing them. Additionally, it analyzed the reasons why people...... stopped playing on-line games. It also compares Facebook and other on-line games....

  17. Developments towards in-gas-jet laser spectroscopy studies of actinium isotopes at LISOL

    Energy Technology Data Exchange (ETDEWEB)

    Raeder, S., E-mail: s.raeder@gsi.de [KU Leuven, Instituut voor Kern- en Stralingsfysica, Celestijnenlaan 200D, B-3001 Leuven (Belgium); Helmholtz-Institut Mainz, 55128 Mainz (Germany); GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Bastin, B. [GANIL, CEA/DSM-CNRS/IN2P3, B.P. 55027, 14076 Caen (France); Block, M. [Helmholtz-Institut Mainz, 55128 Mainz (Germany); GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Institut für Kernchemie, Johannes Gutenberg Universität, 55128 Mainz (Germany); Creemers, P. [KU Leuven, Instituut voor Kern- en Stralingsfysica, Celestijnenlaan 200D, B-3001 Leuven (Belgium); Delahaye, P. [GANIL, CEA/DSM-CNRS/IN2P3, B.P. 55027, 14076 Caen (France); Ferrer, R. [KU Leuven, Instituut voor Kern- en Stralingsfysica, Celestijnenlaan 200D, B-3001 Leuven (Belgium); Fléchard, X. [LPC Caen, ENSICAEN, Université de Caen, CNRS/IN2P3, Caen (France); Franchoo, S. [Institute de Physique Nucléaire (IPN) d’Orsay, 91406 Orsay, Cedex (France); Ghys, L. [KU Leuven, Instituut voor Kern- en Stralingsfysica, Celestijnenlaan 200D, B-3001 Leuven (Belgium); SCK-CEN, Belgian Nuclear Research Center, Boeretang 200, 2400 Mol (Belgium); Gaffney, L.P.; Granados, C. [KU Leuven, Instituut voor Kern- en Stralingsfysica, Celestijnenlaan 200D, B-3001 Leuven (Belgium); Heinke, R. [Institut für Physik, Johannes Gutenberg Universität, 55128 Mainz (Germany); Hijazi, L. [GANIL, CEA/DSM-CNRS/IN2P3, B.P. 55027, 14076 Caen (France); and others

    2016-06-01

    To study exotic nuclides at the borders of stability with laser ionization and spectroscopy techniques, highest efficiencies in combination with a high spectral resolution are required. These usually opposing requirements are reconciled by applying the in-gas-laser ionization and spectroscopy (IGLIS) technique in the supersonic gas jet produced by a de Laval nozzle installed at the exit of the stopping gas cell. Carrying out laser ionization in the low-temperature and low density supersonic gas jet eliminates pressure broadening, which will significantly improve the spectral resolution. This article presents the required modifications at the Leuven Isotope Separator On-Line (LISOL) facility that are needed for the first on-line studies of in-gas-jet laser spectroscopy. Different geometries for the gas outlet and extraction ion guides have been tested for their performance regarding the acceptance of laser ionized species as well as for their differential pumping capacities. The specifications and performance of the temporarily installed high repetition rate laser system, including a narrow bandwidth injection-locked Ti:sapphire laser, are discussed and first preliminary results on neutron-deficient actinium isotopes are presented indicating the high capability of this novel technique.

  18. Atomic spectroscopy studies of short-lived isotopes and nuclear isomer separation with the ISOLDE RILIS

    CERN Document Server

    Fedosseev, V; Weissman, L; Mishin, V I; Federov, D V; Seliverstov, D M; Horn, R; Huber, G; Lassen, J; Wendt, K

    2003-01-01

    The Resonance Ionization Laser Ion Source (RILIS) at the ISOLDE on-line isotope separator is based on the selective excitation of atomic transitions by tunable laser radiation. Ion beams of isotopes of 20 elements have been produced using the RILIS setup. Together with the mass separator and a particle detection system it represents a tool for high-sensitive laser spectroscopy of short-lived isotopes. By applying narrow-bandwidth lasers for the RILIS one can study isotope shifts (IS) and hyperfine structure (HFS) of atomic optical transitions. Such measurements are capable of providing data on nuclear charge radii, spins and magnetic moments of exotic nuclides far from stability. Although the Doppler broadening of the optical absorption lines limits the resolution of the technique, the accuracy of the HFS measurements examined in experiments with stable Tl isotopes approaches a value of 100 MHz. Due to the hyperfine splitting of atomic lines the RILIS gives an opportunity to separate nuclear isomers. Isomer s...

  19. Process for producing enriched uranium having a .sup.235 U content of at least 4 wt. % via combination of a gaseous diffusion process and an atomic vapor laser isotope separation process to eliminate uranium hexafluoride tails storage

    Science.gov (United States)

    Horton, James A.; Hayden, Jr., Howard W.

    1995-01-01

    An uranium enrichment process capable of producing an enriched uranium, having a .sup.235 U content greater than about 4 wt. %, is disclosed which will consume less energy and produce metallic uranium tails having a lower .sup.235 U content than the tails normally produced in a gaseous diffusion separation process and, therefore, eliminate UF.sub.6 tails storage and sharply reduce fluorine use. The uranium enrichment process comprises feeding metallic uranium into an atomic vapor laser isotope separation process to produce an enriched metallic uranium isotopic mixture having a .sup.235 U content of at least about 2 wt. % and a metallic uranium residue containing from about 0.1 wt. % to about 0.2 wt. % .sup.235 U; fluorinating this enriched metallic uranium isotopic mixture to form UF.sub.6 ; processing the resultant isotopic mixture of UF.sub.6 in a gaseous diffusion process to produce a final enriched uranium product having a .sup.235 U content of at least 4 wt. %, and up to 93.5 wt. % or higher, of the total uranium content of the product, and a low .sup.235 U content UF.sub.6 having a .sup.235 U content of about 0.71 wt. % of the total uranium content of the low .sup.235 U content UF.sub.6 ; and converting this low .sup.235 U content UF.sub.6 to metallic uranium for recycle to the atomic vapor laser isotope separation process.

  20. Process for producing enriched uranium having a {sup 235}U content of at least 4 wt. % via combination of a gaseous diffusion process and an atomic vapor laser isotope separation process to eliminate uranium hexafluoride tails storage

    Science.gov (United States)

    Horton, J.A.; Hayden, H.W. Jr.

    1995-05-30

    An uranium enrichment process capable of producing an enriched uranium, having a {sup 235}U content greater than about 4 wt. %, is disclosed which will consume less energy and produce metallic uranium tails having a lower {sup 235}U content than the tails normally produced in a gaseous diffusion separation process and, therefore, eliminate UF{sub 6} tails storage and sharply reduce fluorine use. The uranium enrichment process comprises feeding metallic uranium into an atomic vapor laser isotope separation process to produce an enriched metallic uranium isotopic mixture having a {sup 235} U content of at least about 2 wt. % and a metallic uranium residue containing from about 0.1 wt. % to about 0.2 wt. % {sup 235} U; fluorinating this enriched metallic uranium isotopic mixture to form UF{sub 6}; processing the resultant isotopic mixture of UF{sub 6} in a gaseous diffusion process to produce a final enriched uranium product having a {sup 235}U content of at least 4 wt. %, and up to 93.5 wt. % or higher, of the total uranium content of the product, and a low {sup 235}U content UF{sub 6} having a {sup 235}U content of about 0.71 wt. % of the total uranium content of the low {sup 235}U content UF{sub 6}; and converting this low {sup 235}U content UF{sub 6} to metallic uranium for recycle to the atomic vapor laser isotope separation process. 4 figs.

  1. The Effects of Spanwise Structures and Unsteady Forcing of Vortex Generators on a Shock-Induced Separated Flow Using Planar Laser Scattering

    Science.gov (United States)

    2006-05-01

    beam was minimized to reduce the divergence of the beam. Additionally, by using a half-wave plate the polarization of the laser was oriented so that... Photron FASTCAM-Ultima APX) was externally triggered at 10 kHz by the same SRS DG535 pulse delay generator used to trigger the laser. For Mach 2... Photron Fastcam Viewer software that came with the APX camera. The data was downloaded to a personal computer and sets of images were saved in “.RAWW

  2. Linking Trajectories: On-Line Learning and Intercultural Exchanges

    Science.gov (United States)

    Levinson, Nanette; Davidson, Kaitlin E.

    2015-01-01

    There has been tremendous growth both in study abroad and intercultural exchange options in the United States and also in on-line learning options in higher education. Reviewing 91 cross-cultural experiences with at least one type of formal on-line component, this paper provides an overview and categorization of these offerings as well as a…

  3. 45 CFR 502.8 - Documents on-line.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Documents on-line. 502.8 Section 502.8 Public Welfare Regulations Relating to Public Welfare (Continued) FOREIGN CLAIMS SETTLEMENT COMMISSION OF THE... § 502.8 Documents on-line. Commission documents available in electronic format may be accessed via the...

  4. On-Line and Off-Line Assessment of Metacognition

    Science.gov (United States)

    Saraç, Seda; Karakelle, Sema

    2012-01-01

    The study investigates the interrelationships between different on-line and off-line measures for assessing metacognition. The participants were 47 fifth grade elementary students. Metacognition was assessed through two off-line and two on-line measures. The off-line measures consisted of a teacher rating scale and a self-report questionnaire. The…

  5. From Off-line to On-line Handwriting Recognition

    NARCIS (Netherlands)

    Lallican, P.; Viard-Gaudin, C.; Knerr, S.

    2004-01-01

    On-line handwriting includes more information on time order of the writing signal and on the dynamics of the writing process than off-line handwriting. Therefore, on-line recognition systems achieve higher recognition rates. This can be concluded from results reported in the literature, and has been

  6. On-Line Course Development: Engaging and Retaining Students

    Science.gov (United States)

    Bruster, Benita G.

    2015-01-01

    As the number of on-line classes and the demand for on-line education continues to sky-rocket, it is critical that course developers and university faculty have the skills to effectively design curricula, to develop engaging learning opportunities, and to create responsive courses that meet individual student needs. This paper details three…

  7. A new algorithm for on-line coloring bipartite graphs

    NARCIS (Netherlands)

    Broersma, Haitze J.; Capponi, A.; Paulusma, Daniël

    We first show that for any bipartite graph $H$ with at most five vertices there exists an on-line competitive algorithm for the class of $H$-free bipartite graphs. We then analyze the performance of an on-line algorithm for coloring bipartite graphs on various subfamilies. The algorithm yields new

  8. On-line Learning of Prototypes and Principal Components

    NARCIS (Netherlands)

    Biehl, M.; Freking, A.; Hölzer, M.; Reents, G.; Schlösser, E.; Saad, David

    1998-01-01

    We review our recent investigation of on-line unsupervised learning from high-dimensional structured data. First, on-line competitive learning is studied as a method for the identification of prototype vectors from overlapping clusters of examples. Specifically, we analyse the dynamics of the

  9. Progress of resonant ionization laser ion source development at GANIL

    Energy Technology Data Exchange (ETDEWEB)

    Henares, J. L., E-mail: henares@ganil.fr; Huguet, Y.; Lecesne, N.; Leroy, R.; Osmond, B.; Sjödin, A. M. [GANIL, BP 55027, 14076 Caen Cedex 5 (France); Kron, T.; Schneider, F.; Wendt, K. [Johannes Gutenberg-Universität Mainz, Staudinger Weg 7, 55099 Mainz (Germany)

    2014-02-15

    SPIRAL2 (Système de Production d’Ions Radioactifs Accélérés en Ligne) is a research facility under construction at GANIL (Grand Accélérateur National d’Ions Lourds) for the production of radioactive ion beams by isotope separation on-line methods and low-energy in-flight techniques. A resonant ionization laser ion source will be one of the main techniques to produce the radioactive ion beams. GISELE (GANIL Ion Source using Electron Laser Excitation) is a test bench developed to study a fully operational laser ion source available for Day 1 operations at SPIRAL2 Phase 2. The aim of this project is to find the best technical solution which combines high selectivity and ionization efficiency with small ion beam emittance and stable long term operation. Latest results about the new ion source geometry will be presented.

  10. Progress of resonant ionization laser ion source development at GANIL

    Science.gov (United States)

    Henares, J. L.; Huguet, Y.; Kron, T.; Lecesne, N.; Leroy, R.; Osmond, B.; Schneider, F.; Sjödin, A. M.; Wendt, K.

    2014-02-01

    SPIRAL2 (Système de Production d'Ions Radioactifs Accélérés en Ligne) is a research facility under construction at GANIL (Grand Accélérateur National d'Ions Lourds) for the production of radioactive ion beams by isotope separation on-line methods and low-energy in-flight techniques. A resonant ionization laser ion source will be one of the main techniques to produce the radioactive ion beams. GISELE (GANIL Ion Source using Electron Laser Excitation) is a test bench developed to study a fully operational laser ion source available for Day 1 operations at SPIRAL2 Phase 2. The aim of this project is to find the best technical solution which combines high selectivity and ionization efficiency with small ion beam emittance and stable long term operation. Latest results about the new ion source geometry will be presented.

  11. Screening Test Procedure For Long Life Single Mode Step Index Separate Confinement Heterostructure Single Quantum Well (Sinsch-Sqw) Laser Diodes

    Science.gov (United States)

    Fritz, William J.

    1989-06-01

    An experiment was conducted to establish an effective burn-in and screening procedure for long life SINSCH-SQW laser diodes. The laser diodes were grown by MOCVD and processed with 20μ wide oxide defined stripes. The devices had a high reflective back facet coating with a small etalon bonded to a passivated front facet to ensure single mode operation. The laser diodes were bonded p-side up to copper heat sinks using indium solder. A total of 48 devices were selected prior to burn-in and were operated at 200mA constant current for 2000 hours at an average heat sink temperature of 55°C. The average initial output power was 45mW per device. At the end of the test, the output powers ranged from lmW to 85mW. Most of the devices with the low final power failed catastrophically within 24 hours from the start of the test. Many laser diodes showed very little change in output power while others degraded gradually by varying amounts. Failure analysis showed that failures were facet, bulk, or heat sink related. The temporal output power degradations (i.e., gradual degradation, etc.) can be explained by the identified failure mechanisms. From the test results and failure analysis, a screening strategy based on inspection and burn-in can be devised to reject devices that may fail early. Also, improvements in processing can provide potential yield improvements. After accounting for degradation related to processing, a very long material lifetime is predicted for these SINSCH-SQW laser diodes.

  12. The ISOLDE Laser Ion Source and Trap (LIST): Towards pure ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Daniel [CERN, Geneva (Switzerland); University of Heidelberg (Germany); Blaum, Klaus [University of Heidelberg (Germany); Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany); Catheral, Richard; Fedosseev, Valentin; Gottberg, Alexander; Marsh, Bruce; Rossel, Ralf Erik; Rothe, Sebastian; Stora, Thierry [CERN, Geneva (Switzerland); Kron, Tobias; Richter, Sven; Wendt, Klaus [University of Mainz (Germany)

    2013-07-01

    The on-line isotope mass separator ISOLDE at CERN is a facility dedicated to the production of a large variety of radioactive ion beams. A high ionization efficiency combined with ultimate isotope selectivity is of utmost importance for all on-line experiments on exotic, short-lived radionuclides with the lowest production rates. The ionization technique that most closely meets this requirement is the element selective Resonance Ionization Laser Ion Source (RILIS). Unfortunately, even when the RILIS is used, many rare isotope beams produced at ISOLDE remain contaminated with surface ionized isobars. In order to suppress the surface ions, a radio-frequency quadrupole device known as the Laser Ion Source and Trap (LIST) has been developed at the University of Mainz and at CERN. After the first successful on-line test in 2011, the LIST was further improved in terms of efficiency, selectivity, and reliability through several off-line tests at Mainz University and at ISOLDE/CERN. In September 2012, the first on-line physics experiments to use the LIST took place at ISOLDE. A summary of the LIST technology and the results of the on-line characterization and experiments are given.

  13. Separated Shoulder

    Science.gov (United States)

    ... an injury to the ligaments that hold your collarbone (clavicle) to your shoulder blade. In a mild separated ... tenderness or pain near the end of your collarbone. Causes The most common cause of a separated ...

  14. On-line 2D monitoring of rolling contact fatigue/wear phenomena in dry tests

    Science.gov (United States)

    Bodini, I.; Petrogalli, C.; Mazzù, A.; Faccoli, M.; Lancini, M.; Pasinetti, S.; Sansoni, G.; Docchio, F.

    2017-08-01

    We present the in-field use of a recently developed on-line, real time, optical monitoring system for bi-disk rolling contact tests on railway-wheel- and rail- steel disks, based on laser illumination and a high-speed camera. Qualitative, as well as quantitative information can be obtained by the use of specific indexes derived from the images using blob analysis. Monitoring the tests provides information about the initial transients of turning-crest removal, on the steady state reached, and on the dynamics of the surface in between. Blob anisotropy is a key element to draw information of the mechanisms governing this intermediate state.

  15. Multi-point, multi-wavelength fluorescence monitoring of DNA separation in a lab-on-a-chip with monolithically integrated femtosecond-laser-written waveguides

    NARCIS (Netherlands)

    Dongre, C.; van Weerd, J.; van Weeghel, R.; Martinez-Vazquez, R.; Osellame, R.; Ramponi, R.; Cerullo, G.; Dekker, R; Dekker, R.; Besselink, G.A.J.; van den Vlekkert, H.H.; Hoekstra, Hugo; Pollnau, Markus; not available, NA

    2009-01-01

    Electrophoretic separation of fluorescently labeled DNA molecules in on-chip microfluidic channels was monitored by integrated waveguide arrays, with simultaneous spatial and wavelength resolution. This is an important step toward point-of-care diagnostics with multiplexed DNA assays.

  16. On-Line Allocation Of Robot Resources To Task Plans

    Science.gov (United States)

    Lyons, Damian M.

    1989-02-01

    In this paper, I present an approach to representing plans that make on-line decisions about resource allocation. An on-line decision is the evaluation of a conditional expression involving sensory information as the plan is being executed. I use a plan representation called 7ZS10'1 1,12that has been especially designed for the domain of robot programming, and in particular, for the problem of on-line decisions. The resource allocation example is based on the robot assembly cell architecture outlined by Venkataraman and Lyons16. I begin by setting forth a definition of on-line decision making and some arguments as to why this form of decision making is important and useful. To set the context for the resource allocation example, I take some care in categorizing the types of on-line decision making and the approaches adopted by other workers so far. In particular, I justify a plan-based approach to the study of on-line decision making. From that, the focus shifts to one type of decision making: on-line allocation of robot resources to task plans. Robot resources are the physical manipulators (grippers, wrists, arms, feeders, etc) that are available to carry out the task. I formulate the assembly cell architecture of Venkataraman and Lyons16 as an R.S plan schema, and show how the on-line allocation specified in that architecture can be implemented. Finally, I show how considering the on-line allocation of logical resources, that is a physical resource plus some model information, can be used as a non-traditional approach to some problems in robot task planning.

  17. [On-line coupling of microcolumn electrophoresis and UV-Vis spectrophotometry].

    Science.gov (United States)

    Li, Lian; He, You-Zhao; Gan, Wu-Er; Wang, Xiao-Kui; Xie, Hai-Yang; Gao, Yong

    2010-03-01

    In the present paper, a laboratory-made high-performance electrophoresis microcolumn unit was prepared for UV-Vis spectrophotometer. X-ray diffraction was used in the preparation of electrophoretic microcolumns. And an analytical technique of microcolumn electrophoresis coupled with UV-Vis spectrophotometry was introduced. Uniform quartz microncrystals were prepared by hydrothermal synthesis. Their crystalline phase and morphology were identified by X-ray diffraction and scanning electron microscope, respectively. The quartz microncrystals were packed into a 2-mm i. d. fused-silica tube to prepare the electrophoretic microcolumn. With 1.5 mmol x L(-1) disodium phosphate buffer solution (pH 11.5) containing 25% (phi) methanol and 10% (phi) acetonitrile, tryptophan, phenylalanine and tyrosine were on-line separated on line and detected by microcolumn electrophoresis coupled with UV-Vis spectrophotometry without derivatization. The limits of detection were 0.037, 0.20 and 0.20 micromol x L(-1), respectively. The separation efficiency of tryptophan was 4.5 x 10(4) plates/m. The sample capacity of the electrophoretic microcolumn achieved 35 microL. It was found that the electrophoretic microcolumn packed with quartz microncrystals was able to limit Joule heat, increase sample capacity and enhance detection sensitivity. The laboratory-made electrophoretic microcolumn could be a high-performance separation unit for conventional UV-Vis spectrophotometer. The on-line coupling of microcolumn electrophoresis and UV-Vis spectrophotometry could separate and determine samples with complicated matrices, reduce zone broadening and enhance separation efficiency, so expand the analytical function of spectrophotometer in the trace analysis of mixed components with overlapped spectra.

  18. Efficiently Building On-line Tools for Distributed Heterogeneous Environments

    OpenAIRE

    Günther Rackl; Thomas Ludwig; Markus Lindermeier; Alexandros Stamatakis

    2002-01-01

    Software development is getting more and more complex, especially within distributed middleware-based environments. A major drawback during the overall software development process is the lack of on-line tools, i.e. tools applied as soon as there is a running prototype of an application. The MIMO MIddleware MOnitor provides a solution to this problem by implementing a framework for an efficient development of on-line tools. This paper presents a methodology for developing on-line tools with M...

  19. On-Line Ion Exchange Liquid Chromatography as a Process Analytical Technology for Monoclonal Antibody Characterization in Continuous Bioprocessing.

    Science.gov (United States)

    Patel, Bhumit A; Pinto, Nuno D S; Gospodarek, Adrian; Kilgore, Bruce; Goswami, Kudrat; Napoli, William N; Desai, Jayesh; Heo, Jun H; Panzera, Dominick; Pollard, David; Richardson, Daisy; Brower, Mark; Richardson, Douglas D

    2017-11-07

    Combining process analytical technology (PAT) with continuous production provides a powerful tool to observe and control monoclonal antibody (mAb) fermentation and purification processes. This work demonstrates on-line liquid chromatography (on-line LC) as a PAT tool for monitoring a continuous biologics process and forced degradation studies. Specifically, this work focused on ion exchange chromatography (IEX), which is a critical separation technique to detect charge variants. Product-related impurities, including charge variants, that impact function are classified as critical quality attributes (CQAs). First, we confirmed no significant differences were observed in the charge heterogeneity profile of a mAb through both at-line and on-line sampling and that the on-line method has the ability to rapidly detect changes in protein quality over time. The robustness and versatility of the PAT methods were tested by sampling from two purification locations in a continuous mAb process. The PAT IEX methods used with on-line LC were a weak cation exchange (WCX) separation and a newly developed shorter strong cation exchange (SCX) assay. Both methods provided similar results with the distribution of percent acidic, main, and basic species remaining unchanged over a 2 week period. Second, a forced degradation study showed an increase in acidic species and a decrease in basic species when sampled on-line over 7 days. These applications further strengthen the use of on-line LC to monitor CQAs of a mAb continuously with various PAT IEX analytical methods. Implementation of on-line IEX will enable faster decision making during process development and could potentially be applied to control in biomanufacturing.

  20. On-Line Trajectory Retargeting for Alternate Landing Sites Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Barron Associates, Inc. proposes to develop a novel on-line trajectory optimization approach for Reusable Launch Vehicles (RLVs) under failure scenarios, targeting...

  1. On-line Classical Guitar Course: Blogs for Music Education

    National Research Council Canada - National Science Library

    José Luis Navarro; Gilles Lavigne; G. Guadalupe Martínez Salgado

    2009-01-01

    ...”. This work was a three steep project in which it was implemented, applied and evaluated. The on-line course was intended to prepare the students to learn the basic principles to start in classical music with the guitar...

  2. On-Line Estimation of Allan Variance Parameters

    National Research Council Canada - National Science Library

    Ford, J

    1999-01-01

    ... (Inertial Measurement Unit) gyros and accelerometers. The on-line method proposes a state space model and proposes parameter estimators for quantities previously measured from off-line data techniques such as the Allan variance graph...

  3. On-line control of the nonlinear dynamics for synchrotrons

    National Research Council Canada - National Science Library

    J. Bengtsson; I. P. S. Martin; J. H. Rowland; R. Bartolini

    2015-01-01

    We propose a simple approach to the on-line control of the nonlinear dynamics in storage rings, based on compensation of the nonlinear resonance driving terms using beam losses as the main indicator...

  4. Sampling and sample preparation development for analytical and on-line measurement techniques of process liquids; Naeytteenoton ja kaesittelyn kehittaeminen prosessinesteiden analytiikan ja on-line mittaustekniikan tarpeisiin - MPKT 11

    Energy Technology Data Exchange (ETDEWEB)

    Karttunen, K. [Oulu Univ. (Finland)

    1998-12-31

    Main goal of the research project is to develop sampling and sample handling methods and techniques for pulp and paper industry to be used for analysis and on-line purposes. The research focus specially on the research and development of the classification and separation methods and techniques needed for liquid and colloidal substances as well as in ion analysis. (orig.)

  5. A new method for immunoassays using field-flow fractionation with on-line, continuous chemiluminescence detection.

    Science.gov (United States)

    Melucci, D; Guardigli, M; Roda, B; Zattoni, A; Reschiglian, P; Roda, A

    2003-06-13

    Chemiluminescence detection has already been combined with different separation techniques such as HPLC and capillary electrophoresis. In this work, it was applied to gravitational field-flow fractionation, a low-cost, flow-assisted separation technique for micronsized particles suited to further on-line detection of the separated analytes. Horseradish peroxidase was used as model sample, either free in solution or immobilized onto micronsized, polystyrene beads. The chemiluminescent substrates were added directly into the mobile phase, and the continuous, steady-state chemiluminescence generated during elution was detected on-line by either a flow-through luminometer or a CCD camera. Ultra-low detection limits, two orders of magnitude lower than those achievable with spectrophotometric detection, were found. The possibility to fully separate and quantitate free and bead-immobilized enzymes is reported, as a step towards the development of multianalyte, ultra-sensitive, micronsized beads-based flow-assisted immunoassays.

  6. On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    2003-01-01

    for on-line matrix separation and pre-concentration of trace levels of metals with detection by ICP-MS. It highlights some of the frequently applied on-line, sample-pre-treatment schemes, including solid phase extraction (SPE), on-wall molecular sorption and precipitate/(co)-precipitate retention using...... a polytetrafluoroethylene (PTFE) knotted reactor (KR), solvent extraction-back extraction and hydride/vapor generation. It also addresses a novel, robust approach, whereby the protocol of SI-LOV-bead injection (BI) on-line separation and pre-concentration of ultra-trace levels of metals by a renewable microcolumn...

  7. Modified diglycolamides for the An(III) + Ln(III) co-separation: evaluation by solvent extraction and time-resoved laser fluorescence spectroscopy

    NARCIS (Netherlands)

    Wilden, Andreas; Modolo, Giuseppe; Lange, Steve; Sadowski, Fabian; Beele, Bjorn B.; Skerencak- Frech, Andrej; Panak, Petra J.; Iqbal, M.; Verboom, Willem; Bosbach, Dirk

    2014-01-01

    The use of two recently developed diglycolamide-based extractants for the co-separation of trivalent actinides (An(III)) and lanthanides (Ln(III)) is described and compared to the well-known extractant TODGA (N,N,N’,N’-tetraoctyl diglycolamide). The addition of one or two methyl groups to the

  8. Laser Programs Highlights 1998

    Energy Technology Data Exchange (ETDEWEB)

    Lowdermilk, H.; Cassady, C.

    1999-12-01

    This report covers the following topics: Commentary; Laser Programs; Inertial Confinement Fusion/National Ignition Facility (ICF/NIF); Atomic Vapor Laser Isotope Separation (AVLIS); Laser Science and Technology (LS&T); Information Science and Technology Program (IS&T); Strategic Materials Applications Program (SMAP); Medical Technology Program (MTP) and Awards.

  9. Sport Management Taught On-Line: A Discussion

    Directory of Open Access Journals (Sweden)

    William F. Stier Jr

    2009-01-01

    Full Text Available An introduction to the world of on-line courses (distance education/learning is presented. In addition, the world of on-line learning, as it pertains to sport management, is examined within the framework of (a pedagogy, (b finances,(c assessment, and (d choosing to transition from the traditional classroom to on-line learning. Pertinent points relative to each of the four categories are presented from the literature. In an effort to stimulate thought and discussion to the subject of on-line learning for sport management programs/courses the authors provide their reactions to the literature points by presenting their comments/reactions from a sport management perspective. Sport management professors and administrators are encouraged to critically examine the feasibility of such on-line courses (distance education/learning within their own curricula while maintaining an appropriate framework revolving around sound theoretical instructional strategies, methods as well as appropriate use of instructional tools, including but not limited to, computersand the WWW.

  10. Laser program annual report, 1977. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Bender, C.F.; Jarman, B.D. (eds.)

    1978-07-01

    This volume contains detailed information on each of the following sections: (1) fusion target design, (2) target fabrication, (3) laser fusion experiments and analysis, (4) advanced lasers, (5) systems and applications studies, and (6) laser isotope separation program. (MOW)

  11. CENTRIFUGAL SEPARATORS

    Science.gov (United States)

    Skarstrom, C.

    1959-03-10

    A centrifugal separator is described for separating gaseous mixtures where the temperature gradients both longitudinally and radially of the centrifuge may be controlled effectively to produce a maximum separation of the process gases flowing through. Tbe invention provides for the balancing of increases and decreases in temperature in various zones of the centrifuge chamber as the result of compression and expansions respectively, of process gases and may be employed effectively both to neutralize harmful temperature gradients and to utilize beneficial temperaturc gradients within the centrifuge.

  12. Strengthening weak ties through on-line gaming

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana Virginia; Kirchner, Kathrin

    On-line gaming became widespread in the last couple of years. The aim of the research presented in the paper is to figure out to what extent does game playing helps to strengthen weak ties and what additional factors influence this process. The approach is rather exploratory – some factors...... are grounded in theory, some are new. These factors are age, gender, place of origin, number of their Facebook connections (friends in Facebook terminology), the amount of time they are on Facebook, the amount of time they keep the Facebook site open, the amount of time they play on-line games, and the reasons...... for starting to play on-line games. Regarding the latter, we chose to focus only on escapist reasons....

  13. On-Line Voltage Stability Assessment based on PMU Measurements

    DEFF Research Database (Denmark)

    Garcia-Valle, Rodrigo; P. Da Silva, Luiz C.; Nielsen, Arne Hejde

    2009-01-01

    through statistic analysis. During the off-line analysis, a memory of high-risk situations following a pre-defined voltage stability criterion is obtained. Thereafter, basic statistics analyses are applied resulting in the definition of voltage regions. During on-line operation, voltage magnitudes...... of critical buses obtained by phasor measurements are monitored in relation to the risk regions. Comprehensive studies demonstrate that the proposed method could assist operators to avoid voltage collapse events, by taking preventive or emergency actions.......This paper presents a method for on-line monitoring of risk voltage collapse based on synchronised phasor measurement. As there is no room for intensive computation and analysis in real-time, the method is based on the combination of off-line computation and on-line monitoring, which are correlated...

  14. On-Line Generation of 3D-Waves

    DEFF Research Database (Denmark)

    Frigaard, Peter

    1992-01-01

    The paper describes the technique of filtering white noise for on-line generation of 3D-waves on a small computer in the laboratory. The wave generation package is implemented and tested in the 3D-wave basin at the University of Aalborg.......The paper describes the technique of filtering white noise for on-line generation of 3D-waves on a small computer in the laboratory. The wave generation package is implemented and tested in the 3D-wave basin at the University of Aalborg....

  15. 5th Computer Science On-line Conference

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

    2016-01-01

    This volume is based on the research papers presented in the 5th Computer Science On-line Conference. The volume Artificial Intelligence Perspectives in Intelligent Systems presents modern trends and methods to real-world problems, and in particular, exploratory research that describes novel approaches in the field of artificial intelligence. New algorithms in a variety of fields are also presented. The Computer Science On-line Conference (CSOC 2016) is intended to provide an international forum for discussions on the latest research results in all areas related to Computer Science. The addressed topics are the theoretical aspects and applications of Computer Science, Artificial Intelligences, Cybernetics, Automation Control Theory and Software Engineering.

  16. The User-friendly On-Line Diffusion Chamber

    CERN Document Server

    Aviles Acosta, Jaime

    2015-01-01

    The On-Line Diffusion Chamber is a stand-alone apparatus built to carry out short-live radiotracer diffusion studies. The availability of the on-demand production of isotopes in the ISOLDE facility, and the design of the apparatus to streamline the implantation process, annealing treatment, ion gun ablation with a tape transport system, and radiation intensity measurement with a Ge gamma detector all in the same apparatus, gives the On-Line Diffusion Chamber a unique ability to studies with short-lived radioisotopes or isomer states that are not possible in any other facility in the world.

  17. Escapist Motives for Playing On-Line Games

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    , Harteveld and Mayer’s framework (2009) of escapist motives, which identifies four main motives for playing on-line games: mundane breaking, stress relieving, pleasure seeking, and imagination conjuring. In the paper, we report preliminary findings from an exploratory questionnaire survey. Besides importance...... of escapist motives for playing Facebook and other on-line games, we investigate how they are linked to demographic data such as: age, gender, place of origin, along with other social interactions patterns and social network usage behavior, current gaming status and an estimate of gaming time. According...

  18. Escapist Motives for Playing On-Line Games

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    2012-01-01

    , Harteveld and Mayer’s framework (2009) of escapist motives, which identifies four main motives for playing on-line games: mundane breaking, stress relieving, pleasure seeking, and imagination conjuring. In the paper, we report preliminary findings from an exploratory questionnaire survey. Besides importance...... of escapist motives for playing Facebook and other on-line games, we investigate how they are linked to demographic data such as: age, gender, place of origin, along with other social interactions patterns and social network usage behavior, current gaming status and an estimate of gaming time. According...

  19. Pseudo-stationary separation materials for highly parallel separations.

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Anup K.; Palmer, Christopher (University of Montana, Missoula, MT)

    2005-05-01

    Goal of this study was to develop and characterize novel polymeric materials as pseudostationary phases in electrokinetic chromatography. Fundamental studies have characterized the chromatographic selectivity of the materials as a function of chemical structure and molecular conformation. The selectivities of the polymers has been studied extensively, resulting in a large body of fundamental knowledge regarding the performance and selectivity of polymeric pseudostationary phases. Two polymers have also been used for amino acid and peptide separations, and with laser induced fluorescence detection. The polymers performed well for the separation of derivatized amino acids, and provided some significant differences in selectivity relative to a commonly used micellar pseudostationary phase. The polymers did not perform well for peptide separations. The polymers were compatible with laser induced fluorescence detection, indicating that they should also be compatible with chip-based separations.

  20. ISOLTRAP: a tandem Penning trap system for accurate on-line mass determination of short-lived isotopes

    Science.gov (United States)

    Bollen, G.; Becker, S.; Kluge, H.-J.; König, M.; Moore, R. B.; Otto, T.; Raimbault-Hartmann, H.; Savard, G.; Schweikhard, L.; Stolzenberg, H.; Isolde Collaboration

    1996-02-01

    The tandem Penning trap mass spectrometer ISOLTRAP has been set up at the on-line mass separator ISOLDE at CERN/Geneva for accurate mass measurements of short-lived nuclei with T {1}/{2} ≥ 1 s. The mass measurement is performed via the determination of the cyclotron frequency of an ion in a magnetic field. The design of the spectrometer matches the particular requirements for on-line mass measurements on short-lived isotopes. With the ISOLTRAP spectrometer masses of more than 70 radioactive nuclei have so far been determined with resolving powers exceeding one million and an accuracy of typically 10 -7.

  1. ISOLTRAP: a tandem Penning trap system for accurate on-line mass determination of short-lived isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Bollen, G. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Becker, S. [Mainz Univ. (Germany). Inst. fuer Physik; Kluge, H.J. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Koenig, M. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Moore, R.B. [McGill Univ., Montreal, PQ (Canada). Foster Radiation Lab.; Otto, T. [Mainz Univ. (Germany). Inst. fuer Physik; Raimbault-Hartmann, H. [Mainz Univ. (Germany). Inst. fuer Physik; Savard, G. [Mainz Univ. (Germany). Inst. fuer Physik; Schweikhard, L. [Mainz Univ. (Germany). Inst. fuer Physik; Stolzenberg, H. [Mainz Univ. (Germany). Inst. fuer Physik; ISOLDE Collaboration

    1996-01-11

    The tandem Penning trap mass spectrometer ISOLTRAP has been set up at the on-line mass separator ISOLDE at CERN/Geneva for accurate mass measurements of short-lived nuclei with T{sub 1/2} {>=}1 s. The mass measurement is performed via the determination of the cyclotron frequency of an ion in a magnetic field. The design of the spectrometer matches the particular requirements for on-line mass measurements on short-lived isotopes. With the ISOLTRAP spectrometer masses of more than 70 radioactive nuclei have so far been determined with resolving powers exceeding one million and an accuracy of typically 10{sup -7}. (orig.).

  2. Trends and perspectives of flow injection/sequential injection on-line sample-pretreatment schemes coupled to ETAAS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    2005-01-01

    Flow injection (FI) analysis, the first generation of this technique, became in the 1990s supplemented by its second generation, sequential injection (SI), and most recently by the third generation (i.e.,Lab-on-Valve). The dominant role played by FI in automatic, on-line, sample pretreatments in ......-review is thus to illustrate the state-of-the-art progress in implementing miniaturised FI/SI systems for on-line separation and preconcentration of trace metals with detection by ETAAS since 2000. We also discuss future perspectives in this field....

  3. First field application of a thermal desorption resonance-enhanced multiphoton-ionisation single particle time-of-flight mass spectrometer for the on-line detection of particle-bound polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Oster, Markus; Elsasser, Michael; Schnelle-Kreis, Jürgen; Zimmermann, Ralf

    2011-12-01

    The on-line analysis of single aerosol particles with mass spectrometrical methods is an important tool for the investigation of aerosols. Often, a single laser pulse is used for one-step laser desorption/ionisation of aerosol particles. Resulting ions are detected with time-of-flight mass spectrometry. With this method, the detection of inorganic compounds is possible. The detection of more fragile organic compounds and carbon clusters can be accomplished by separating the desorption and the ionisation in two steps, e.g. by using two laser pulses. A further method is, using a heated metal surface for thermal desorption of aerosol particles. If an ultraviolet laser is used for ionisation, a selective ionisation of polycyclic aromatic hydrocarbons (PAH) and alkylated PAH is possible via a resonance-enhanced multiphoton-ionisation process. Laser velocimetry allows individual laser triggering for single particles and additionally delivers information on aerodynamic particle diameters. It was shown that particles deriving from different combustion sources can be differentiated according to their PAH patterns. For example, retene, a C(4)-alkylated phenanthrene derivative, is a marker for the combustion of coniferous wood. In this paper, the first field application of a thermal desorption resonance-enhanced multiphoton-ionisation single particle time-of-flight mass spectrometer during a measurement campaign in Augsburg, Germany in winter 2010 is presented. Larger PAH-containing particles (i.e. with aerodynamic diameters larger than 1 μm), which are suspected to be originated by re-suspension processes of agglomerated material, were in the focus of the investigation. Due to the low concentration of these particles, an on-line virtual impactor enrichment system was used. The detection of particle-bound PAH in ambient particles in this larger size region was possible and in addition, retene could be detected on several particles, which allows to identify wood combustion as

  4. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site

    Energy Technology Data Exchange (ETDEWEB)

    Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H. (ed.)

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs.

  5. HOPE: An On-Line Piloted Handling Qualities Experiment Data Book

    Science.gov (United States)

    Jackson, E. B.; Proffitt, Melissa S.

    2010-01-01

    A novel on-line database for capturing most of the information obtained during piloted handling qualities experiments (either flight or simulated) is described. The Hyperlinked Overview of Piloted Evaluations (HOPE) web application is based on an open-source object-oriented Web-based front end (Ruby-on-Rails) that can be used with a variety of back-end relational database engines. The hyperlinked, on-line data book approach allows an easily-traversed way of looking at a variety of collected data, including pilot ratings, pilot information, vehicle and configuration characteristics, test maneuvers, and individual flight test cards and repeat runs. It allows for on-line retrieval of pilot comments, both audio and transcribed, as well as time history data retrieval and video playback. Pilot questionnaires are recorded as are pilot biographies. Simple statistics are calculated for each selected group of pilot ratings, allowing multiple ways to aggregate the data set (by pilot, by task, or by vehicle configuration, for example). Any number of per-run or per-task metrics can be captured in the database. The entire run metrics dataset can be downloaded in comma-separated text for further analysis off-line. It is expected that this tool will be made available upon request

  6. Comparing the happiness effects of real and on-line friends.

    Directory of Open Access Journals (Sweden)

    John F Helliwell

    Full Text Available A recent large Canadian survey permits us to compare face-to-face ('real-life' and on-line social networks as sources of subjective well-being. The sample of 5,000 is drawn randomly from an on-line pool of respondents, a group well placed to have and value on-line friendships. We find three key results. First, the number of real-life friends is positively correlated with subjective well-being (SWB even after controlling for income, demographic variables and personality differences. Doubling the number of friends in real life has an equivalent effect on well-being as a 50% increase in income. Second, the size of online networks is largely uncorrelated with subjective well-being. Third, we find that real-life friends are much more important for people who are single, divorced, separated or widowed than they are for people who are married or living with a partner. Findings from large international surveys (the European Social Surveys 2002-2008 are used to confirm the importance of real-life social networks to SWB; they also indicate a significantly smaller value of social networks to married or partnered couples.

  7. Comparing the happiness effects of real and on-line friends.

    Science.gov (United States)

    Helliwell, John F; Huang, Haifang

    2013-01-01

    A recent large Canadian survey permits us to compare face-to-face ('real-life') and on-line social networks as sources of subjective well-being. The sample of 5,000 is drawn randomly from an on-line pool of respondents, a group well placed to have and value on-line friendships. We find three key results. First, the number of real-life friends is positively correlated with subjective well-being (SWB) even after controlling for income, demographic variables and personality differences. Doubling the number of friends in real life has an equivalent effect on well-being as a 50% increase in income. Second, the size of online networks is largely uncorrelated with subjective well-being. Third, we find that real-life friends are much more important for people who are single, divorced, separated or widowed than they are for people who are married or living with a partner. Findings from large international surveys (the European Social Surveys 2002-2008) are used to confirm the importance of real-life social networks to SWB; they also indicate a significantly smaller value of social networks to married or partnered couples.

  8. A new method for process monitoring in high power simultaneous laser beam welding

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, B.; Koerber, C.; Behler, K.; Beyer, E. [Fraunhofer Inst. fuer Lasertechnik, Aachen (Germany)

    1996-12-31

    Simultaneous laser beam welding is a modified procedure of both sided laser beam welding. Two laser beams are focused in opposite direction at the same time and place onto the workpiece. The process is characterized by the formation of a joint keyhole opened to both sides of the workpiece. The main advantages in comparison with conventional laser welding processes are higher welding speed, avoidance of angular distortion due to a symmetrical field of thermal stresses, as well as minimum porosity, especially in the middle of the seam volume, and a high degree of process stability. The advantages are depending on the joint keyhole. In the case of small disadjustment of the two beam axes combined with inappropriate parameter settings this joint keyhole can collapse into two separated keyholes each having only an opening to one side of the workpiece. Therefore the process state with joint keyhole has to be monitored. According to this criterion a non-destructive on-line measurement technique has been developed. The measurement technique is based on RF-frequency modulation of one of the two applied laser beams. Since the results of the measurement are available in very short time scales a usage for on-line control is possible.

  9. The Lesson Observation On-Line (Evidence Portfolio) Platform

    Science.gov (United States)

    Cooper, David G.

    2015-01-01

    At a time when teacher training is being moved to school-based programmes it is important to engage in a research-informed dialogue about creating more distinctive, and cost-effective 21st century models of teacher training. Three years ago I began feasibility field testing the Lesson Observation On-line (Evidence Portfolio) Platform [LOOP]…

  10. On-Line Pesticide Training with Narrated Powerpoint Presentations

    Science.gov (United States)

    Johnson, Steven B.

    2015-01-01

    UMaine Cooperative Extension is the primary educational delivery organization for pesticide recertification credits in Maine. Shrinking budgets and staff numbers are making traditional face-to-face delivery increasingly difficult to maintain. To address this issue, on-line pesticide applicator recertification training credits were developed. The…

  11. On-Line Synthesis and Analysis by Mass Spectrometry

    Science.gov (United States)

    Bain, Ryan M.; Pulliam, Christopher J.; Raab, Shannon A.; Cooks, R. Graham

    2015-01-01

    In this laboratory experiment, students learn how to use ESI to accelerate chemical synthesis and to couple it with on-line mass spectrometry for structural analysis. The Hantzsch synthesis of symmetric 1,4-dihydropyridines is a classic example of a one-pot reaction in which multiple intermediates can serve to indicate the progress of the reaction…

  12. The On-Line Processing of Written Irony

    Science.gov (United States)

    Filik, Ruth; Moxey, Linda M.

    2010-01-01

    We report an eye-tracking study in which we investigate the on-line processing of written irony. Specifically, participants' eye movements were recorded while they read sentences which were either intended ironically, or non-ironically, and subsequent text which contained pronominal reference to the ironic (or non-ironic) phrase. Results showed…

  13. Investigating on-line pornography at the University of Johannesburg

    Directory of Open Access Journals (Sweden)

    P. Laughton

    2007-12-01

    Full Text Available The on-line user of today has access to a vast collection of information resources. In addition, the developments in Internet and Web technologies have made it even easier for surfers to anonymously get access to on-line pornography. The purpose of this research was to investigate the extent to which access to on-line pornography at the University of Johannesburg can be managed. For the empirical part of this research 1037 questionnaires were proportionally distributed to and completed by students on all five campuses of the university. The questionnaire consisted of four sections: biographical information; university computer facility usage; university acceptable use policy; and personal experience with university computer facilities. The gender distribution for the sample was almost even, with total of 49,4% male participants and 50,6% female, with the largest grouping of respondents(61,6% aged between 19 years and 21 years. Of the respondents, 36,7% indicated that exposure to unsolicited pornography did not bother them. When asked to what extent students should have access to pornography, 60,5% stated 'None' while 32,6% believed that 'Restricted' access should be granted for research purposes and 6,9% believed that students should be granted 'Total' access to pornography. Results from the research will be used to manage access to on-line resources at the University of Johannesburg better.

  14. Simultaneous Determination of Palladium and Platinum by On-line ...

    African Journals Online (AJOL)

    NJD

    only in automotive catalytic converters but in medical applications. (Pt) and in food production (Pd)5 has ... elements derived from automotive catalytic converters are released as nanocrystallites (particles less .... Figure 1 On-line enrichment system using the valve-switching technique. Pump A, Waters 515 Pump. Pump B ...

  15. Investigating on-line pornography at the University of Johannesburg

    Directory of Open Access Journals (Sweden)

    P. Laughton

    2008-01-01

    Full Text Available The on-line user of today has access to a vast collection of information resources. In addition, the developments in Internet and Web technologies have made it even easier for surfers to anonymously get access to on-line pornography. The purpose of this research was to investigate the extent to which access to on-line pornography at the University of Johannesburg can be managed. For the empirical part of this research 1037 questionnaires were proportionally distributed to and completed by students on all five campuses of the university. The questionnaire consisted of four sections: biographical information; university computer facility usage; university acceptable use policy; and personal experience with university computer facilities. The gender distribution for the sample was almost even, with a total of 49,4% male participants and 50,6% female, with the largest grouping of respondents (61,6% aged between 19 years and 21 years. Of the respondents, 36,7% indicated that exposure to unsolicited pornography did not bother them. When asked to what extent students should have access to pornography, 60,5% stated 'None' while 32,6% believed that 'Restricted' access should be granted for research purposes and 6,9% believed that students should be granted 'Total' access to pornography. Results from the research will be used to manage access to on-line resources at the University of Johannesburg better.

  16. Developing an On-Line Interactive Health Psychology Module

    Science.gov (United States)

    Upton, Dominic; Cooper, Carol

    2006-01-01

    On-line teaching material in health psychology was developed which ensured a range of students could access appropriate material for their course and level of study. This material has been developed around the concept of smaller "content chunks" which can be combined into whole units of learning (topics), and ultimately, a module. On the…

  17. Comparison between constant methanol feed and on-line ...

    African Journals Online (AJOL)

    Two methanol feeding methods, namely constant methanol feed and on-line monitoring feed control by methanol sensor were investigated to improve the production of recombinant human growth hormone (rhGH) in high cell density cultivation of Pichia pastoris KM71 in 2 L bioreactor. The yeast utilized glycerol as a carbon ...

  18. Efficiently Building On-line Tools for Distributed Heterogeneous Environments

    Directory of Open Access Journals (Sweden)

    Günther Rackl

    2002-01-01

    Full Text Available Software development is getting more and more complex, especially within distributed middleware-based environments. A major drawback during the overall software development process is the lack of on-line tools, i.e. tools applied as soon as there is a running prototype of an application. The MIMO MIddleware MOnitor provides a solution to this problem by implementing a framework for an efficient development of on-line tools. This paper presents a methodology for developing on-line tools with MIMO. As an example scenario, we choose a distributed medical image reconstruction application, which represents a test case with high performance requirements. Our distributed, CORBA-based application is instrumented for being observed with MIMO and related tools. Additionally, load balancing mechanisms are integrated for further performance improvements. As a result, we obtain an integrated tool environment for observing and steering the image reconstruction application. By using our rapid tool development process, the integration of on-line tools shows to be very convenient and enables an efficient tool deployment.

  19. A Perspective on Line Regulation of DC Power Supplies

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 10. A Perspective on Line Regulation of DC Power Supplies. Vijay H Raybagkar. Classroom Volume 12 Issue 10 October 2007 pp 80-85. Fulltext. Click here to view fulltext PDF. Permanent link:

  20. On-Line Learning and the Implications for School Design

    Science.gov (United States)

    Stack, Greg

    2011-01-01

    "Disrupting Class," published in 2008, is the story of how disruptive innovation, innovation that changes the business model organizations, will fundamentally change the American school system. The book's most startling prediction is that half of all high school classes will be on-line by 2019. In considering these predictions, the author began to…

  1. The On-Line Audit Revisited: Yale University.

    Science.gov (United States)

    Weldon, Albert R., Jr.; And Others

    1984-01-01

    Yale University's on-line examination of accounting and administrative systems is discussed. Program goals are to review financial management systems at the university to identify weaknesses in internal controls, and to fulfill all audit requirements of federal grants and contracts. After outlining the quarterly audit cycle, advantages of the…

  2. The dynamics of on-line principal component analysis

    NARCIS (Netherlands)

    Biehl, M.; Schlösser, E.

    1998-01-01

    The learning dynamics of an on-line algorithm for principal component analysis is described exactly in the thermodynamic limit by means of coupled ordinary differential equations for a set of order parameters. It is demonstrated that learning is delayed significantly because existing symmetries

  3. Integrated sensor array for on-line monitoring micro bioreactors

    NARCIS (Netherlands)

    Krommenhoek, E.E.

    2007-01-01

    The “Fed��?batch on a chip��?��?project, which was carried out in close cooperation with the Technical University of Delft, aims to miniaturize and parallelize micro bioreactors suitable for on-line screening of micro-organisms. This thesis describes an electrochemical sensor array which has been

  4. On-line backpropagation in two-layered neural networks

    NARCIS (Netherlands)

    Riegler, Peter; Biehl, Michael

    1995-01-01

    We present an exact analysis of learning a rule by on-line gradient descent in a two-layered neural network with adjustable hidden-to-output weights (backpropagation of error). Results are compared with the training of networks having the same architecture but fixed weights in the second layer.

  5. On-line high-speed rail defect detection.

    Science.gov (United States)

    2004-10-01

    This report presents the results of phase 2 of the project On-line high-speed rail defect detection aimed at improving the reliability and the speed of current defect detection in rails. Ultrasonic guided waves, traveling in the rail running di...

  6. English Language Education On-Line Game and Brain Connectivity

    Science.gov (United States)

    Hong, Ji Sun; Han, Doug Hyun; Kim, Young In; Bae, Su Jin

    2017-01-01

    The HoDoo English game was developed to take advantage of the benefits attributed to on-line games while teaching English to native Korean speakers. We expected to see that the improvements in the subjects' English language abilities after playing the HoDoo English game would be associated with increased brain functional connectivity in the areas…

  7. On-line identification, flutter testing and adaptive notching of ...

    Indian Academy of Sciences (India)

    The second technique is based on decoupling rigid-body and structural modes of the aircraft by means of a Kalman filter and using rigid-body estimates in the feedback control loop. The difference between the two approaches is that on-line identification and adaptive notching in the first approach are entirely based on the ...

  8. On-Line Monitoring: Technical Specification for Instruments

    Energy Technology Data Exchange (ETDEWEB)

    E. Davis

    2002-12-02

    The report describes content and scope of Technical Specification changes in support of on-line monitoring of calibration of instrumentation. The uncertainty of the multivariate state estimation technique is addressed with respect to safety-related setpoints. Validation and verification of the associated software is addressed.

  9. ORION-the Omega Remote Interactive On-line System

    CERN Document Server

    Russell, R D; Levratt, B; Lipps, H; Sparrman, P

    1974-01-01

    ORION is a system which permits the manipulation of files, records and characters, remote job submittal and retrieval of output files including the direct loading of remote on-line computers. The system uses the computer hardware of the OMEGA project at CERN and is designed to assist researchers in development and debugging of their programs. (10 refs).

  10. ORION - the OMEGA Remote Interactive On-line System

    CERN Document Server

    Russell, R D; Krieger, M

    1973-01-01

    ORION is a system which permits the manipulation of files, records and characters, remote job submittal and retrieval of output files including the direct loading of remote on-line computers. The system uses the computer hardware of the OMEGA project at CERN, and is designed to assist researchers in development and debugging of their programs.

  11. ADAPTIVE CONTEXT PROCESSING IN ON-LINE HANDWRITTEN CHARACTER RECOGNITION

    NARCIS (Netherlands)

    Iwayama, N.; Ishigaki, K.

    2004-01-01

    We propose a new approach to context processing in on-line handwritten character recognition (OLCR). Based on the observation that writers often repeat the strings that they input, we take the approach of adaptive context processing. (ACP). In ACP, the strings input by a writer are automatically

  12. Personal Assistant for onLine Services: Addressing human factors

    NARCIS (Netherlands)

    Lindenberg, J.; Nagata, S.F.; Neerincx, M.A.

    2003-01-01

    The Personal Assistant for onLine Services (PALS) project aims at substantially improving the user experience of mobile internet services. It focuses on a generic solution: a personal assistant, which attunes the interaction to the momentary user needs and use context (e.g. adjusting the

  13. Specialization processes in on-line unsupervised learning

    NARCIS (Netherlands)

    Biehl, M.; Freking, A.; Reents, G.; Schlösser, E.

    1998-01-01

    From the recent analysis of supervised learning by on-line gradient descent in multilayered neural networks it is known that the necessary process of student specialization can be delayed significantly. We demonstrate that this phenomenon also occurs in various models of unsupervised learning. A

  14. Mentoring Narratives ON-LINE:Teaching the Principalship

    Directory of Open Access Journals (Sweden)

    Allison I. Griffith

    2002-05-01

    Full Text Available The need to develop new models for preparation of school administrators has been a prominent concern in educational discourse in the last decade. Having been criticized for the inadequate preparation of the school leadership cadre, academic departments responsible for training future school administrators have had to revisit their approaches and to reframe their teaching philosophies to ensure the readiness of their graduates for the challenges and complexities of school leadership. This article reports on the new model of principals' training that has been used in York University's Principals' Qualification Program (PQP from the late 1990s onward. One component of the program brings traditional case methodology into a computer-mediated/on-line environment. The on-line cases are narratives from the everyday lives of the Ontario school administrators who serve as mentors in the on-line environment. Situating our discussion within the context of the rapidly changing educational landscape of Ontario, we focus on the PQP model to explore experientially generated case narratives as one method for teaching and learning the work of the local school administrator. We focus particularly on the teaching and learning embedded in computer-mediated or on-line case narratives used in training teachers for school leadership. We argue that the complexities of school leadership—the social, cultural, relational, ethical and moral context of school leadership—can be taught effectively through the reflective processes of on-line case narratives. We seek to contribute to the ongoing dialogue on the potential of new pedagogies and new technologies to help prepare the competent and responsible leaders for tomorrow's schools.

  15. Isotope separation

    Science.gov (United States)

    Bartlett, Rodney J.; Morrey, John R.

    1978-01-01

    A method and apparatus is described for separating gas molecules containing one isotope of an element from gas molecules containing other isotopes of the same element in which all of the molecules of the gas are at the same electronic state in their ground state. Gas molecules in a gas stream containing one of the isotopes are selectively excited to a different electronic state while leaving the other gas molecules in their original ground state. Gas molecules containing one of the isotopes are then deflected from the other gas molecules in the stream and thus physically separated.

  16. ISOTOPE SEPARATORS

    Science.gov (United States)

    Bacon, C.G.

    1958-08-26

    An improvement is presented in the structure of an isotope separation apparatus and, in particular, is concerned with a magnetically operated shutter associated with a window which is provided for the purpose of enabling the operator to view the processes going on within the interior of the apparatus. The shutier is mounted to close under the force of gravity in the absence of any other force. By closing an electrical circuit to a coil mouated on the shutter the magnetic field of the isotope separating apparatus coacts with the magnetic field of the coil to force the shutter to the open position.

  17. Alkali suppression within laser ion-source cavities and time structure of the laser ionized ion-bunches

    CERN Document Server

    Lettry, Jacques; Köster, U; Georg, U; Jonsson, O; Marzari, S; Fedosseev, V

    2003-01-01

    The chemical selectivity of the target and ion-source production system is an asset for Radioactive Ion-Beam (RIB) facilities equipped with mass separators. Ionization via laser induced multiple resonant steps Ionization has such selectivity. However, the selectivity of the ISOLDE Resonant Ionization Laser Ion-Source (RILIS), where ionization takes place within high temperature refractory metal cavities, suffers from unwanted surface ionization of low ionization potential alkalis. In order to reduce this type of isobaric contaminant, surface ionization within the target vessel was used. On-line measurements of the efficiency of this method is reported, suppression factors of alkalis up to an order of magnitude were measured as a function of their ionization potential. The time distribution of the ion bunches produced with the RILIS was measured for a variety of elements and high temperature cavity materials. While all ions are produced within a few nanoseconds, the ion bunch sometimes spreads over more than 1...

  18. Rapid mitochondrial DNA typing using restriction enzyme digestion of polymerase chain reaction amplicons followed by capillary electrophoresis separation with laser-induced fluorescence detection.

    Science.gov (United States)

    Butler, J M; Wilson, M R; Reeder, D J

    1998-01-01

    The polymorphic control region of mitochondrial DNA (mtDNA) is becoming more commonly used in forensic applications to differentiate among individuals in a population. Two hypervariable regions (HV1 and HV2) are often sequenced following amplification of the mtDNA via the polymerase chain reaction (PCR). More rapid screening assays would reduce both the effort and the expense of comparing two samples. A methodology has been developed that first uses restriction endonuclease digestion of the PCR-amplified mtDNA using RsaI and MnlI and then capillary electrophoresis (CE) to separate and size the PCR-RFLP fragments. This rapid procedure offers an alternative method for screening of polymorphisms in amplified mtDNA samples. In addition, the presence of a T-->C transition at position 16189, which gives rise to the so-called "C-stretch" in HV1, may be predicted from the presence of nonspecific PCR products in the CE results.

  19. GPS Separator HD

    CERN Multimedia

    2016-01-01

    Footage of the 70 degree ISOLDE GPS separator magnet MAG70 as well as the switchyard for the Central Mass and GLM (GPS Low Mass) and GHM (GPS High Mass) beamlines in the GPS separator zone. In the GPS20 vacuum sector equipment such as the long GPS scanner 482 / 483 unit, faraday cup FC 490, vacuum valves and wiregrid piston WG210 and WG475 and radiation monitors can also be seen. Also the RILIS laser guidance and trajectory can be seen, the GPS main beamgate switch box and the actual GLM, GHM and Central Beamline beamgates in the beamlines as well as the first electrostatic quadrupoles for the GPS lines. Close up of the GHM deflector plates motor and connections and the inspection glass at the GHM side of the switchyard.

  20. High-performance liquid chromatography on-line coupled to high-field NMR and mass spectrometry for structure elucidation of constituents of Hypericum perforatum L

    DEFF Research Database (Denmark)

    Hansen, S. H.; Jensen, A. G.; Cornett, Claus

    1999-01-01

    The on-line separation and structure elucidation of naphthodianthrones, flavonoids, and other constituents of an extract from Hypericum perforatum L, using high performance liquid chromatography (HPLC) coupled on-line with ultraviolet-visible, nuclear magnetic resonance (NMR), and mass spectrometry......, all of the major known constituents in extracts from Hypericum perforatum L, were identified, and two new substances which had not previously been reported as constituents of extracts of Hypericum perforatum L. were identified and their structures elucidated....

  1. On-Line Corrosion Monitoring of Plate Structures Based on Guided Wave Tomography Using Piezoelectric Sensors.

    Science.gov (United States)

    Rao, Jing; Ratassepp, Madis; Lisevych, Danylo; Hamzah Caffoor, Mahadhir; Fan, Zheng

    2017-12-12

    Corrosion is a major safety and economic concern to various industries. In this paper, a novel ultrasonic guided wave tomography (GWT) system based on self-designed piezoelectric sensors is presented for on-line corrosion monitoring of large plate-like structures. Accurate thickness reconstruction of corrosion damages is achieved by using the dispersive regimes of selected guided waves and a reconstruction algorithm based on full waveform inversion (FWI). The system makes use of an array of miniaturised piezoelectric transducers that are capable of exciting and receiving highly dispersive A0 Lamb wave mode at low frequencies. The scattering from transducer array has been found to have a small effect on the thickness reconstruction. The efficiency and the accuracy of the new system have been demonstrated through continuous forced corrosion experiments. The FWI reconstructed thicknesses show good agreement with analytical predictions obtained by Faraday's law and laser measurements, and more importantly, the thickness images closely resemble the actual corrosion sites.

  2. Fractal groups: Emergent dynamics in on-line learning communities

    Directory of Open Access Journals (Sweden)

    Junia de Carvalho Fidelis Braga

    Full Text Available Drawing on complexity theory, this work discusses the complex dynamics and emergent patterns of on-line learning communities based on a doctoral study in the area of Applied Linguistics. The analysis will center on the interlocutions of fifty students who interacted in small groups without the teacher's direct intervention, in an undergraduate course offered by the School of Languages and Literature at the Federal University of Minas Gerais. By analyzing the data, I demonstrate that out of the interactions among the peers of autonomous on-line learning communities arise opportunities for the construction of shared meaning, distributed leadership, as well as other dynamics. I also demonstrate the fractal nature of these communities. Moreover, I discuss how these findings shed light on the creation and development of course designs for large groups.

  3. UniFlex - Collaborative on-line learning environment tool

    Directory of Open Access Journals (Sweden)

    Ole Borch

    2004-03-01

    Full Text Available Første gang publiceret i UNEV nr. 2: E-læringsplatforme - muligheder og potentialer, januar - marts 2004, red. Tom Nyvand og Michael Pedersen. ISSN 1603-5518. Increasing demands for remote on-line education are changing the way teaching and learning is performed. New behavior in using pedagogy and supporting technology is needed to drive the learning process. To facilitate the use of services for selected activities to participants in distance education, a web site named UniFlex (University Flexible learning has been developed and brought into use. The site is a comprehensive set of bookmarks including course taking, upload/download, and - of special significance - collaborative on-line project work. UniFlex has been developed to meet the requirement for a simple and cheap personalized interactive site, supporting problem oriented and project organized study form, which has characterized Aalborg University for more than 27 years.

  4. HRS Separator

    CERN Multimedia

    2016-01-01

    Footage of the 90 and 60 degree ISOLDE HRS separator magnets in the HRS separator zone. In the two vacuum sectors HRS20 and HRS30 equipment such as the HRS slits SL240, the HRS faraday cup FC300 and wiregrid WG210 can be spotted. Vacuum valves, turbo pumps, beamlines, quadrupoles, water and compressed air connections, DC and signal cabling can be seen throughout the video. The HRS main and user beamgate in the beamline between MAG90 and MAG60 and its switchboxes as well as all vacuum bellows and flanges are shown. Instrumentation such as the HRS scanner unit 482 / 483, the HRS WG470 wiregrid and slits piston can be seen. The different quadrupoles and supports are shown as well as the RILIS guidance tubes and installation at the magnets and the different radiation monitors.

  5. On-line Corrosion Monitoring in District Heating Systems

    DEFF Research Database (Denmark)

    Richter, Sonja; Thorarinsdottir, R.I.; Hilbert, Lisbeth Rischel

    2005-01-01

    The corrosion control in district heating systems is today performed primarily with control of the water quality. The corrosion rate is kept low by assuring low dissolved oxygen concentration, high pH and low conductivity. Corrosion failures can occur, e.g. as a result of unknown oxygen ingress......, precipitation of deposits or crevices. The authors describe methods used for on-line monitoring of corrosion, cover the complications and the main results of a Nordic project....

  6. On-Line and Back at S.F.U.

    Directory of Open Access Journals (Sweden)

    M. Sanderson

    1973-06-01

    Full Text Available Simon Fraser University library began operation with an automated circulation system. After deliberation, it mounted the first phase of a two-phase online circulation system. A radically revised loan pol·icy caused the system design and assumptions to be called into question. A cheaper, simpler, and more effective off-line system eventually replaced the on-line system. The systems, fiscal, and administrative implications of this decision are reviewed.

  7. On-line probabilistic classification with particle filters

    DEFF Research Database (Denmark)

    Højen-Sørensen, Pedro; de Freitas, N.; Fog, Torben L.

    2000-01-01

    We apply particle filters to the problem of on-line classification with possibly overlapping classes. This allows us to compute the probabilities of class membership as the classes evolve. Although we adopt neural network classifiers, the work can be extended to any other parametric classification...... scheme. We demonstrate our methodology on a simple example and on the problem of fault detection of dynamically operated marine diesel engines....

  8. High-pressure continuously tunable CO2 lasers and molecular laser ...

    Indian Academy of Sciences (India)

    2014-01-05

    Jan 5, 2014 ... The acronym MLIS (molecular laser isotope separation) defines the laser process whereby the isotopes of uranium can be separated by mid-infrared laser/s when the molecule employed is UF6. The theoretical and spectroscopical data to configure and enable experiments and demonstrations in the ...

  9. Ion-selective optical sensor for continuous on-line monitoring of dialysate sodium during dialysis

    Science.gov (United States)

    Sharma, Manoj K.; Frijns, Arjan J. H.; Mandamparambil, Rajesh; Kooman, Jeroen P.; Smeulders, David M. J.

    2017-02-01

    Patients with end stage renal disease are dependent on dialysis. In most outpatient centers, the dialysate is prepared with a fixed electrolyte concentration without taking into account the inter-individual differences of essential electrolytes (sodium, potassium and calcium). This one-size fits all approach can lead to acute and chronic cardiovascular complications in dialysis patients. On-line monitoring of these essential electrolytes is an important physiological step towards patient specific dialysate leading to individualized treatment. Currently, changes in electrolyte concentrations are indirectly measured by conductivity measurements, which are not ion- specific. In this paper, we present a novel optical sensor for on-line monitoring of sodium concentrations in dialysate. This sensor is ion-specific and can detect up to a single ion. The working principle is based on the selective fluorescence quenching of photo-induced electron transfer (PET) molecules. The PET molecules when complexed with sodium ions start fluorescing upon laser excitation. The emission intensity is directly correlated to the sodium concentration. To prove the working principle, a micro-optofluidic device has been fabricated in polydimethylsiloxane (PDMS) with integrated optical fibers for fluorescence light collection. The PET molecules are covalently grafted in the PDMS microchannel for continuous monitoring of the sodium dialysate concentrations. The experimental setup consists of a laser module (λ=450nm) operating at 4.5mW, a syringe pump to precisely control the sample flow and a spectrometer for fluorescence collection. The performance of the sensor has been evaluated for sodium ions ranging from 0-50mM. A clear signal and good response time was observed.

  10. On-line Monitoring System for Power Transformers

    Directory of Open Access Journals (Sweden)

    Alexandru HOTEA

    2016-12-01

    Full Text Available Power transformers are the most important and expensive equipment from the electricity transmission system, so it is very important to know the real state of health of such equipment in every moment. De-energizing the power transformer accidentally due to internal defects can generate high costs. Annual maintenance proved to be ineffective in many cases to determine the internal condition of the equipment degradation due to faults rapidly evolving. An On-line Monitoring System for Power Transformers help real-time condition assessment and to detect errors early enough to take action to eliminate or minimize them. After abnormality detected, it is still important to perform full diagnostic tests to determine the exact condition of the equipment. On-line monitoring systems can help increase the level of availability and reliability of power transformers and lower costs of accidental interruption. This paper presents cases studies on several power transformers equipped with on-line monitoring systems from Transelectrica substation.

  11. Electrochemistry combined on-line with electrospray mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, F.; Berkel, G.J.V. [Oak Ridge National Lab., TN (United States)

    1995-10-15

    In this paper a variety of methods to couple electrochemistry on-line with electrospray mass spectrometry (EC/ES-MS) are presented, and the fundamental and analytical utility of this hybrid technique is illustrated. The major problems encountered in coupling EC and ES-MS are discussed, and means to overcome them are presented. Three types of electrochemical flow cells, viz., a thin-layer electrode flow-by cell, a tubular electrode flow-through cell, and a porous electrode flow-through cell, are discussed in regard to their suitability for this coupling. Methods for coupling each of these electrochemical cells on-line with ES-MS, either floated at or decoupled from the ES high voltage and controlled by a constant current supply, a constant potential supply, or a potentiostat are presented. Three applications are used to illustrate the utility and versatility of the EC/ES-MS combination: (1) the ionization of neutral analytes (i.e., perylene) for detection by ES-MS, (2) the study of the products of electrode reactions (i.e., nickel(II) octaethylporphyrin oxidation products), including relatively short-lived products (i.e., {Beta}-carotene oxidation products), and (3) the enhanced determination of metals (i.e., elemental silver) achieved by coupling anodic stripping voltammetry on-line with ES-MS. 52 refs., 6 figs.

  12. Review of trigger and on-line processors at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Lankford, A.J.

    1984-07-01

    The role of trigger and on-line processors in reducing data rates to manageable proportions in e/sup +/e/sup -/ physics experiments is defined not by high physics or background rates, but by the large event sizes of the general-purpose detectors employed. The rate of e/sup +/e/sup -/ annihilation is low, and backgrounds are not high; yet the number of physics processes which can be studied is vast and varied. This paper begins by briefly describing the role of trigger processors in the e/sup +/e/sup -/ context. The usual flow of the trigger decision process is illustrated with selected examples of SLAC trigger processing. The features are mentioned of triggering at the SLC and the trigger processing plans of the two SLC detectors: The Mark II and the SLD. The most common on-line processors at SLAC, the BADC, the SLAC Scanner Processor, the SLAC FASTBUS Controller, and the VAX CAMAC Channel, are discussed. Uses of the 168/E, 3081/E, and FASTBUS VAX processors are mentioned. The manner in which these processors are interfaced and the function they serve on line is described. Finally, the accelerator control system for the SLC is outlined. This paper is a survey in nature, and hence, relies heavily upon references to previous publications for detailed description of work mentioned here. 27 references, 9 figures, 1 table.

  13. Internet Teaching By Style: Profiling the On-line Professor

    Directory of Open Access Journals (Sweden)

    Sharon Strand

    2000-01-01

    Full Text Available The goal of this article is to offer the results of a pilot study which examined the personality type and teaching style preferences of faculty who elected to teach an on-line course. The article will present a description of personality assessments, including the Myers-Briggs Type Indicator (MBTI and Anthony Gregorc's Transaction Ability Inventory used to determine teaching tendencies and styles. In addition, a structured written questionnaire developed by the researchers was used to assess teacher satisfaction with worldwide web-based instruction. Utilizing the results of these psychological assessments, a preliminary analysis of the personal characteristics of college professors who chose to teach on line will be presented. This pilot study found that some preferred teaching styles may be more compatible with the dynamics of distance learning formats. By determining successful teaching styles for on-line courses, we can develop more effective faculty development programs to assist others in successfully transitioning into the cyber-teaching and learning environment.

  14. Designing effective on-line continuing medical education.

    Science.gov (United States)

    Zimitat, Craig

    2001-03-01

    The Internet, and new information and communication technologies available through the Internet, provides medical educators with an opportunity to develop unique on-line learning environments with real potential to improve physicians' knowledge and effect change in their clinical practice. There are approximately 100 websites offering on-line CME courses in the USA alone. However, few of these CME courses appear to be based on sound educational principles or CME research and may have little chance of achieving the broader goals of CME. The majority of these courses closely resemble their traditional counterparts (e.g. paper-based books are now electronic books) and appear to be mere substitutions for old-technology CME resources. Whilst some CME providers add unique features of the Internet to enrich their websites, they do not employ strategies to optimize the learning opportunities afforded by this new technology. The adoption of adult learning principles, reflective practice and problem-based approaches can be used as a foundation for sound CME course design. In addition, knowledge of Internet technology and the learning opportunities it affords, together with strategies to maintain participation and new assessment paradigms, are all needed for developing online CME. We argue for an evidence-based and strategic approach to the development of on-line CME courses designed to enhance physician learning and facilitate change in clinical behaviour.

  15. Separation system

    Science.gov (United States)

    Rubin, Leslie S.

    1986-01-01

    A separation system for dewatering radioactive waste materials includes a disposal container, drive structure for receiving the container, and means for releasably attaching the container to the drive structure. Separation structure disposed in the container adjacent the inner surface of the side wall structure retains solids while allowing passage of liquids. Inlet port structure in the container top wall is normally closed by first valve structure that is centrifugally actuated to open the inlet port and discharge port structure at the container periphery receives liquid that passes through the separation structure and is normally closed by second valve structure that is centrifugally actuated to open the discharge ports. The container also includes coupling structure for releasable engagement with the centrifugal drive structure. Centrifugal force produced when the container is driven in rotation by the drive structure opens the valve structures, and radioactive waste material introduced into the container through the open inlet port is dewatered, and the waste is compacted. The ports are automatically closed by the valves when the container drum is not subjected to centrifugal force such that containment effectiveness is enhanced and exposure of personnel to radioactive materials is minimized.

  16. Wood chip moisture on-line measurement system based on the combination of the different methods; Yhdistelmaemittaus hakkeen kosteuden on-line-maeaeritykseen

    Energy Technology Data Exchange (ETDEWEB)

    Jaervinen, T. (VTT Technical Research Centre of Finland, Jyvaeskylae (Finland)); Malinen, J.; Hietala, E. (VTT Technical Research Centre of Finland, Oulu (Finland)); Teppola, T.; Siikanen, S. (VTT Technical Research Centre of Finland, Kuopio (Finland)); Tiitta, M. (Kuopio Univ. (Finland))

    2008-07-01

    The aim of the project is to develop wood chip moisture on-line measurement system based on the combination of different methods. The gauges utilised are nir-, impedance- and radiometric devices. All the measurements are installed in PDU-scale conveyor facility, which is targeted for development and testing fuel and bulk material quality and property measurement technology and devices. The system enables to achieve accurate reference moisture content data and sufficient range of moisture content variation in full scale. The usability and accuracy of the separate measurement methods have been researched by testing in different conditions. As a result it will be suggested the best combination of different methods for each purpose. The actual system will be realised in a separate new project under plan. The combination should have good usability and it should be able to apply to the different types of wood chip like wood chips for pulping and logging residue chips and even to other biomass materials in variable conditions. (orig.)

  17. Gas separating

    Science.gov (United States)

    Gollan, A.

    1988-03-29

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  18. Flow Separation

    Science.gov (United States)

    1975-11-01

    perfomanoas que oette oirconstance peut entrainer, soit encore, d’un point de vue plus fondamental par la recherche dM phenomknas qui caracterisent 1M...dtfoolleoent, dont le m^canlsme de formation eat en tout point sen- blable h celui qui a etc döcrit § 2.2. XL se caracterise par la presence d’une onde...during orbital maneuvers with the Reaction Control System (RCS) and later plume induced separation leading to aerodynamic heating and control problems

  19. On-line monitoring and analysis of reactor vessel integrity

    Energy Technology Data Exchange (ETDEWEB)

    Ackerson, D.S.; Impink, A.J. Jr.; Balkey, K.R.; Andreychek, T.S.

    1989-01-31

    A method is described for on-line monitoring and analysis of nuclear reactor pressure vessel integrity in a unit in which reactor coolant is circulated along the inner wall of the pressure vessel, the method comprising the steps of: generating on an on-line basis, temperature signals representative of the temperature of the reactor coolant circulating along the inner wall of the pressure vessel; generating on an on-line basis, a pressure signal representative of the reactor coolant pressure; generating a signal representative of fast neutron fluence to which the reactor pressure vessel has been subjected; generating as a function of the fluence signal a visual representation of the actual real time reference nil-ductibility transition temperature (RT/sub ndt/) across the entire pressure vessel wall thickness at a preselected critical location in the wall; generating as a function of transients in the reactor coolant temperature and pressur signals, a visual representation of the real time required RT/sub ndt/, across the entire pressure vessel wall thickness at the selected critical location, the required RT/sub ndt/ being the RT/sub ndt/ that would be required in the pressure vessel wall for flaw initiation to occur as a result of stresses set-up by the transients; and superimposing the visual representations of the real-time actual and required RT/sub ndt's/ for flaw initiation across the entire pressure vessel wall thickness for the selected critical location to generate a visual representation of the difference in value between the actual and required RT/sub ndt/ presented as an RT/sub ndt/ margin.

  20. On-line Analysis of Catalytic Reaction Products Using a High-Pressure Tandem Micro-reactor GC/MS.

    Science.gov (United States)

    Watanabe, Atsushi; Kim, Young-Min; Hosaka, Akihiko; Watanabe, Chuichi; Teramae, Norio; Ohtani, Hajime; Kim, Seungdo; Park, Young-Kwon; Wang, Kaige; Freeman, Robert R

    2017-01-01

    When a GC/MS system is coupled with a pressurized reactor, the separation efficiency and the retention time are directly affected by the reactor pressure. To keep the GC column flow rate constant irrespective of the reaction pressure, a restrictor capillary tube and an open split interface are attached between the GC injection port and the head of a GC separation column. The capability of the attached modules is demonstrated for the on-line GC/MS analysis of catalytic reaction products of a bio-oil model sample (guaiacol), produced under a pressure of 1 to 3 MPa.

  1. Enhancing Learner Autonomy in an On-line Editing Programme

    Directory of Open Access Journals (Sweden)

    Hebe Wong

    2011-09-01

    Full Text Available Little (1999 argues that in formal educational contexts, “the basis of learner autonomy is acceptance of responsibility for one’s own learning” (p.11. An autonomous learner takes responsibility for various aspects of learning (Benson & Voller, 1997; Holec, 1981. This study examines how learner autonomy opportunities were provided at various stages of writing in an on-line editing programme for a group of electronic engineering students and how the students took charge of their language learning when receiving feedback on their technical writing. The impact on their own learning effectiveness of the decisions students made is also discussed.

  2. On-line Measurements of Settling Charateristics in Activated Sludge

    DEFF Research Database (Denmark)

    Rasmussen, Michael R.; Larsen, Torben

    1997-01-01

    An on-line settling column for measuring the dynamic variations of settling velocity of activated sludge has been developed. The settling column is automatic and self-cleansing insuring continuous and reliable measurements. The settling column was tested on sludge from a batch reactor where sucrose...... was added as an impulse to activated sludge. The continuous measurement of settling velocity revealed a highly dynamic response after the sucrose was added. The result were verified with simultaneous measurement of the initial settling rate. A 200 hour experiment showed variations in settling velocity......, which was not apparent in the DSVI (Diluted Sludge Volume Index)....

  3. Lower Bounds and Semi On-line Multiprocessor Scheduling

    Directory of Open Access Journals (Sweden)

    T.C. Edwin Cheng

    2003-10-01

    Full Text Available We are given a set of identical machines and a sequence of jobs from which we know the sum of the job weights in advance. The jobs have to be assigned on-line to one of the machines and the objective is to minimize the makespan. An algorithm with performance ratio 1.6 and a lower bound of 1.5 is presented. This improves recent results by Azar and Regev who published an algorithm with performance ratio 1.625 for the less general problem that the optimal makespan is known in advance.

  4. 76 FR 52731 - On-Line Complaint Form for Service-Related Issues in Air Transportation

    Science.gov (United States)

    2011-08-23

    ... Office of the Secretary On-Line Complaint Form for Service-Related Issues in Air Transportation AGENCY... of information from the public using an on-line complaint form. The on-line complaint form allows the... . SUPPLEMENTARY INFORMATION: Title: Submission of Aviation Consumer Protection Division Webpage On-Line Aviation...

  5. A novel on-line gold nanoparticle-catalyzed luminol chemiluminescence detector for high-performance liquid chromatography.

    Science.gov (United States)

    Zhang, Qun Lin; Wu, Liang; Lv, Chen; Zhang, Xiao Yue

    2012-06-15

    A novel on-line gold nanoparticle-catalyzed luminol-H(2)O(2) chemiluminescence (CL) detector for high-performance liquid chromatography (HPLC) was established, in which gold nanoparticles were produced by the on-line reaction of H(2)O(2), NaHCO(3)-Na(2)CO(3) (buffer solution of luminol), and HAuCl(4). Eight phenolic compounds (gallic acid, protocatechuic acid, protocatechuic aldehyde, 2,5-dihydroxybenzoic acid, caffeic acid, 2,3-dihydroxybenzoic acid, (+)-catechin, and (-)-epicatechin) were chosen as the model compounds. Every separated phenolic compound in the column eluent strongly enhanced the CL signal of on-line gold nanoparticle-catalyzed luminol system. The CL and UV-visible absorption spectra and transmission electron microscopy studies were carried out, and the CL enhancement mechanism was ascribed to that the presence of phenolic compound promoted the on-line formation of 38-nm-diameter gold nanoparticles, which better catalyzed the luminol-H(2)O(2) CL reaction. The effects of methanol and phosphoric acid in the proposed HPLC configuration were performed by two gradient elution programs, and the baseline profile revealed that on-line gold nanoparticle-catalyzed luminol-H(2)O(2) CL detector had better compatibility than 38 nm gold colloids-luminol-H(2)O(2) CL detector. The proposed CL detector exhibits excellent analytical performance with the low detection limit (S/N=3) of 0.53-0.97 ng/mL (10.6-19.4 pg) phenolic compounds, and offers a new strategy for developing on-line nanoparticle-catalyzed CL detector for HPLC with sensitive analysis. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. The Automated Threaded Fastening Based on On-line Identification

    Directory of Open Access Journals (Sweden)

    Mongkorn Klingajay

    2004-12-01

    Full Text Available The principle of the thread fastenings have been known and used for decades with the purpose of joining one component to another. Threaded fastenings are popular because they permit easy disassembly for maintenance, repair, relocation and recycling. Screw insertions are typically carried out manually. It is a difficult problem to automat. As a result there is very little published research on automating threaded fastenings, and most research on automated assembly focus on the peg-in-hole assembly problem. This paper investigates the problem of automated monitoring of the screw insertion process. The monitoring problem deals with predicting integrity of a threaded insertion, based on the torque vs. insertion depth curve generated during the insertions. The authors have developed an analytical model to predict the torque signature signals during self-tapping screw insertions. However, the model requires parameters on the screw dimensions and plate material properties are difficult to measure. This paper presents a study on on-line identification during screw fastenings. An identification methodology for two unknown parameter estimation during a self-tapping screw insertion process is presented. It is shown that friction and screw properties required by the model can be reliably estimated on-line. Experimental results are presented to validate the identification procedure.

  7. The Automated Threaded Fastening Based on On-line Identification

    Directory of Open Access Journals (Sweden)

    Nicolas Ivan Giannoccaro

    2008-11-01

    Full Text Available The principle of the thread fastenings have been known and used for decades with the purpose of joining one component to another. Threaded fastenings are popular because they permit easy disassembly for maintenance, repair, relocation and recycling. Screw insertions are typically carried out manually. It is a difficult problem to automat. As a result there is very little published research on automating threaded fastenings, and most research on automated assembly focus on the peg-in-hole assembly problem. This paper investigates the problem of automated monitoring of the screw insertion process. The monitoring problem deals with predicting integrity of a threaded insertion, based on the torque vs. insertion depth curve generated during the insertions. The authors have developed an analytical model to predict the torque signature signals during self-tapping screw insertions. However, the model requires parameters on the screw dimensions and plate material properties are difficult to measure. This paper presents a study on on-line identification during screw fastenings. An identification methodology for two unknown parameter estimation during a self-tapping screw insertion process is presented. It is shown that friction and screw properties required by the model can be reliably estimated on-line. Experimental results are presented to validate the identification procedure.

  8. Polar On-Line Acquisition Relay and Transmission System (POLARATS)

    Energy Technology Data Exchange (ETDEWEB)

    Yuracko, K.

    2004-07-15

    POLARATS (Polar On-Line Acquisition Relay And Transmission System) is being developed by YAHSGS LLC (YAHSGS) and Oak Ridge National Laboratory (ORNL) to provide remote, unattended monitoring of environmental parameters under harsh environmental conditions. In particular, instrumental design and engineering is oriented towards protection of human health in the Arctic, and with the additional goal of advancing Arctic education and research. POLARATS will obtain and transmit environmental data from hardened monitoring devices deployed in locations important to understanding atmospheric and aquatic pollutant migration as it is biomagnified in Arctic food chains. An Internet- and personal computer (PC)-based educational module will provide real time sensor data, on-line educational content, and will be integrated with workbooks and textbooks for use in middle and high school science programs. The educational elements of POLARATS include an Internet-based educational module that will instruct students in the use of the data and how those data fit into changing Arctic environments and food chains. POLARATS will: (1) Enable students, members of the community, and scientific researchers to monitor local environmental conditions in real time over the Internet; and (2) Provide additional educational benefits through integration with middle- and high-school science curricula. Information will be relayed from POLARATS devices to classrooms and libraries along with custom-designed POLARATS teaching materials that will be integrated into existing curricula to enhance the educational benefits realized from the information obtained.

  9. On-line measurements of diesel nanoparticle composition and volatility

    Science.gov (United States)

    Sakurai, Hiromu; Tobias, Herbert J.; Park, Kihong; Zarling, Darrick; Docherty, Kenneth S.; Kittelson, David B.; McMurry, Peter H.; Ziemann, Paul J.

    A thermal desorption particle beam mass spectrometer (TDPBMS) and tandem differential mobility analyzers (TDMA) were used for on-line measurements of the chemical composition and volatility of nanoparticles and larger particles emitted from a modern, heavy-duty diesel engine operated at light and medium loads under laboratory conditions. Temperature-dependent TDPBMS mass spectra and mass spectra obtained using spectrally distinctive oil and synthetic Fischer-Tropsch fuel were analyzed using mass spectral matching methods to obtain quantitative information on the contributions of fuel, oil, oxidation products, and sulfuric acid to particle composition. TDMA measurements of volatility yielded information on nanoparticle vapor pressures and therefore on the composition of organic components. The results indicate that, for these operating conditions, the volatile component of both diesel nanoparticles and larger particles is comprised of at least 95% unburned lubricating oil. TDMA volatility measurements also detected residual species a few nanometers in diameter, which may be non-volatile cores (soot, metal oxide) or low-volatility organic compounds. These on-line analyses provide new insights into the mechanisms of diesel nanoparticle formation.

  10. Aria Sardinia: the on line community joining tradition and innovatiom

    Directory of Open Access Journals (Sweden)

    Fabrizio Lao

    2005-12-01

    Full Text Available The "ARIA Sardinia" project (Network Actions for Italians Abroad has been especially designed to integrate and give value to the network of relationships between public administrations, local socio-economic stakeholders and Italian communities abroad, this goal to be pursued with the support of new technologies and learning approaches emerging within the context of on line interest communities. The general objective of the project is the development of competencies and knowledge, intended to combine specific technical skills with local "territorial knowledge", in a process where the strengthening and the dissemination of these forms of culture come from the prompt use of innovative tools. The main activities of the project are the actions intended to guide and assist entrepreneurs, associations, development projects' partners or promoters in the path of acquisition and dissemination of the competencies which are necessary to the involvement of Italians abroad into the internationalization process of Sardinian economy. ARIA Sardinia was funded by the Italian Foreign Affairs Ministry and the European Social Fund (FSE, within the framework of the National Operational Program for Technical Assistance and System Action (PON ATAS aimed at specific promotion initiatives and fostering of permanent links between Southern Italy economy and Italians living abroad. Keywords: on line community, networking, Italians abroad, Sardinian economy, Sardinia, culture.

  11. On-line estimation of concentration parameters in fermentation processes.

    Science.gov (United States)

    Xiong, Zhi-hua; Huang, Guo-hong; Shao, Hui-he

    2005-06-01

    It has long been thought that bioprocess, with their inherent measurement difficulties and complex dynamics, posed almost insurmountable problems to engineers. A novel software sensor is proposed to make more effective use of those measurements that are already available, which enable improvement in fermentation process control. The proposed method is based on mixtures of Gaussian processes (GP) with expectation maximization (EM) algorithm employed for parameter estimation of mixture of models. The mixture model can alleviate computational complexity of GP and also accord with changes of operating condition in fermentation processes, i.e., it would certainly be able to examine what types of process-knowledge would be most relevant for local models' specific operating points of the process and then combine them into a global one. Demonstrated by on-line estimate of yeast concentration in fermentation industry as an example, it is shown that soft sensor based state estimation is a powerful technique for both enhancing automatic control performance of biological systems and implementing on-line monitoring and optimization.

  12. The NA48 on-line PC farm

    CERN Document Server

    Wittgen, M

    2001-01-01

    The NA48 experiment at the CERN SPS measures the direct CP violation parameter Re( epsilon '/z) in the neutral kaon system with an intended precision of 2*10/sup -4/. Thus, the data acquisition system has to handle peak rates up to 150 MByte/s during a 2.5 s beam burst and flat rates up to 20 MByte/s during on-line processing. The NA48 on-line PC farm includes 24 PentiumII-266 MHz PCs connected via switched fast ethernet network. This farm receives data from the detector systems and performs event building. Afterwards the data are transferred via an optical gigabit ethernet link to the NA48 central data recording system at CERN computer center. In addition, trigger and checking processes can be applied. The software on the farm is implemented as client/server applications and represents a highly flexible, fail safe, and scalable system. During data taking, in 1999, 100 TByte were collected, processed, and stored by the acquisition system with an overall efficiency of 99%. (5 refs).

  13. Asymmetrical flow field-flow fractionation with on-line detection for drug transfer studies: a feasibility study

    DEFF Research Database (Denmark)

    Hinna, A.; Steiniger, F.; Hupfeld, S.

    2014-01-01

    Knowledge about drug retention within colloidal carriers is of uppermost importance particularly if drug targeting is anticipated. The aim of the present study was to evaluate asymmetrical flow field-flow fractionation (AF4) with on-line UV/VIS drug quantification for its suitability to determine...... was found repeatable and robust. The employed combination of AF4 with multi-angle laser light scattering furthermore provided detailed size information of the eluting sample and thus allowed to detect instabilities and/or interactions between the donor and acceptor liposomes. Drug quantification by on...

  14. FEDIX on-line information service: Design, develop, test, and implement, an on-line research and education information service

    Energy Technology Data Exchange (ETDEWEB)

    Rodman, J.A.

    1992-01-01

    The FEDIX Annual Status Report provides details regarding an on-line information project designed, developed and implemented by Federal Information Exchange, Inc., a diversified information services company. This document details the project design activities, summarizes the developmental phases of the project and describes the implementation activities generated to fulfill the project's objectives. The information contained in this document illustrates FIE's continuing commitment to serve as the link that facilitates the dissemination of federal information to the education community. This report reviews the project accomplishments and describes intended service enhancements.

  15. On-line sample processing methods in flow analysis

    DEFF Research Database (Denmark)

    Miró, Manuel; Hansen, Elo Harald

    2008-01-01

    -line dilution, derivatization, separation and preconcentration methods encompassing solid reactors, solvent extraction, sorbent extraction, precipitation/coprecipitation, hydride/vapor generation and digestion/leaching protocols as hyphenated to a plethora of detection devices is discussed in detail...

  16. Laser Applications in Orthodontics

    Science.gov (United States)

    Heidari, Somayeh; Torkan, Sepideh

    2013-01-01

    A laser is a collimated single wavelength of light which delivers a concentrated source of energy. Soon after different types of lasers were invented, investigators began to examine the effects of different wavelengths of laser energy on oral tissues, routine dental procedures and experimental applications. Orthodontists, along with other specialist in different fields of dentistry, can now benefit from several different advantages that lasers provide during the treatment process, from the beginning of the treatment, when separators are placed, to the time of resin residues removal from the tooth surface at the end of orthodontic treatment. This article outlines some of the most common usages of laser beam in orthodontics and also provides a comparison between laser and other conventional method that were the standard of care prior to the advent of laser in this field. PMID:25606324

  17. Non-invasive on-line two-phase flow regime identification employing artificial neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Tambouratzis, T. [Department of Industrial Management and Technology, University of Piraeus, 107 Deligiorgi St., Piraeus 185 34 (Greece)], E-mail: tatianatambouratzis@gmail.com; Pazsit, I. [Department of Reactor Physics, Chalmers University of Technology, SE-412 Goteborg (Sweden)

    2009-05-01

    A novel non-invasive approach to the on-line identification of BWR two-phase flow regimes is investigated. The proposed approach receives neutron radiography images of coolant flow recordings as its input and performs feature extraction on each image via simple and directly computable statistical operators. The extracted features are subsequently used as inputs to an ensemble of self-organizing maps whose outputs demonstrate swift and accurate classification of each image into its corresponding flow regime. The novelty of the approach lies in the use of the self-organizing map which generates the different classes by itself, according to feature similarity of the corresponding images; this contrasts traditional artificial neural networks where the user has to define both the number of distinct classes as well as to supply separate training vectors for each class.

  18. A new on-line luminometer and beam conditions monitor using single crystal diamond sensors

    CERN Document Server

    CMS Collaboration

    2015-01-01

    Instrumentation near the beam-pipe requires extremely radiation hard sensors. Inside CMS two rings instrumented with 12 single crystal diamond sensors each are installed on both sides of the interaction point. The sensors are subdivided in two pads, and each pad is read out by a dedicated fast radiation hard ASIC in 130 nm CMOS technology. Due to the excellent time resolution collision products will be separated from machine induced background. In the backend a dead-time less histogramming unit is used, and a fast microTCA system with GHz sampling rate is under development. The detector will measure both the on-line luminosity and the background bunch-by-bunch. The performance of a prototype detector in a test-beam will be reported, and results from the operation during data taking will be presented.

  19. Continuous on-line measurements of respiratory system, lung and chest wall mechanics during mechanic ventilation.

    Science.gov (United States)

    Kárason, S; Søndergaard, S; Lundin, S; Stenqvist, O

    2001-08-01

    We present a concept of on-line, manoeuvre-free monitoring of respiratory mechanics during dynamic conditions, displaying calculated alveolar pressure/volume curves continuously and separating lung and chest wall mechanics. Prospective observational study. Intensive care unit of a university hospital. Ten ventilator-treated patients with acute lung injury. Different positive end-expiratory pressure (PEEP) and tidal volumes, low flow inflation. Previously validated methods were used to present a single-value dynostatic compliance for the whole breath and a dynostatic volume-dependent initial, middle and final compliance within the breath. A high individual variation of respiratory mechanics was observed. Reproducibility of repeated measurements was satisfactory (coefficients of variations for dynostatic volume-dependent compliance: mechanics during ongoing ventilator treatment.

  20. Laser programs highlights, July--August 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    Laser research at LLNL is divided into five major programmatic areas: inertial confinement fusion (ICF), uranium atomic vapor laser isotope separation (U-AVLIS), special (plutonium) isotope separation (SIS), laser technology, and advanced applications. We have made important progress this past year in each of these areas. This report covers the current state of these 5 areas.

  1. Marital satisfaction and break-ups differ across on-line and off-line meeting venues.

    Science.gov (United States)

    Cacioppo, John T; Cacioppo, Stephanie; Gonzaga, Gian C; Ogburn, Elizabeth L; VanderWeele, Tyler J

    2013-06-18

    Marital discord is costly to children, families, and communities. The advent of the Internet, social networking, and on-line dating has affected how people meet future spouses, but little is known about the prevalence or outcomes of these marriages or the demographics of those involved. We addressed these questions in a nationally representative sample of 19,131 respondents who married between 2005 and 2012. Results indicate that more than one-third of marriages in America now begin on-line. In addition, marriages that began on-line, when compared with those that began through traditional off-line venues, were slightly less likely to result in a marital break-up (separation or divorce) and were associated with slightly higher marital satisfaction among those respondents who remained married. Demographic differences were identified between respondents who met their spouse through on-line vs. traditional off-line venues, but the findings for marital break-up and marital satisfaction remained significant after statistically controlling for these differences. These data suggest that the Internet may be altering the dynamics and outcomes of marriage itself.

  2. ALMDS laser system

    Science.gov (United States)

    Kushina, Mark E.; Heberle, Geoff; Hope, Michael; Hall, David; Bethel, Michael; Calmes, Lonnie K.

    2003-06-01

    The ALMDS (Airborne Laser Mine Detection System) has been developed utilizing a solid-state laser operating at 532nm for naval mine detection. The laser system is integrated into a pod that mounts externally on a helicopter. This laser, along with other receiver systems, enables detailed underwater bathymetry. CEO designs and manufactures the laser portion of this system. Arete Associates integrates the laser system into the complete LIDAR package that utilizes sophisticated streak tube detection technology. Northrop Grumman is responsible for final pod integration. The laser sub-system is comprised of two separate parts: the LTU (Laser Transmitter Unit) and the LEU (Laser Electronics Unit). The LTU and LEU are undergoing MIL-STD-810 testing for vibration, shock, temperature storage and operation extremes, as well as MIL-STD-704E electrical power testing and MIL-STD-461E EMI testing. The Nd:YAG MOPA laser operates at 350 Hz pulse repetition frequency at 45 Watts average 532nm power and is controlled at the system level from within the helicopter. Power monitor circuits allow real time laser health monitoring, which enables input parameter adjustments for consistent laser behavior.

  3. On-line nuclear orientation. Progress report, April 1, 1992--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Krane, K.S.

    1993-12-31

    This report describes progress made during the extended final year (April 1, 1992 to December 31, 1993) and summarizes the accomplishments of the entire three-year period (April 1, 1990 through December 31, 1993) of the current US Department of Energy grant DE-FG06-87ER40345. This work is carried out primarily at the UNISOR (University Isotope Separator at Oak Ridge) facility of the Holifield Heavy-Ion Research Facility of the Oak Ridge National Laboratory. The primary mission of this work is the study of the structure and properties of nuclei far from stability through on-line nuclear orientation using the UNISOR Nuclear Orientation Facility, a helium dilution refrigerator coupled on-line to the UNISOR mass separator. The author`s group was one of the original proposers of this facility and played a central role in its design, construction, and development. The structure of nuclei far from stability is in general poorly known. Knowledge from heavy-ion reactions is generally limited to states on or near the yrast line, and thus a great deal of the low-energy structure, especially that at low spin, is often missed in such studies. The large beta-decay energies, on the other hand, result in the population of a multitude of states which often give a reasonably complete picture of the complex structure of these nuclei. The goal of this work is to use the nuclear orientation facility in conjunction with other UNISOR capabilities to examine and to understand the structure of these nuclei.

  4. Resonant ionization by laser beams: application to ions sources and to study the nuclear structure of radioactive tellurium isotopes; Ionisation resonante par faisceaux laser: application aux sources d'ions et a l'etude de la structure des noyaux radioactifs de tellure

    Energy Technology Data Exchange (ETDEWEB)

    Sifi, R

    2007-07-15

    The radioactive ion beams that are produced through current isotope separators are well separated according to the A mass but not according to the Z parameter. The resonant ionization through laser beams applied to ion sources allows the production of radioactive ion beam in a very selective and efficient way by eliminating the isobaric contamination. The first chapter is dedicated to the resonant ionization by laser beams, we describe the principle, the experimental setting, the lasers used, the ionization schemes and the domain of application. The second chapter deals with the application of resonant ionization to laser ion sources for the production of radioactive ion beams. We present experimental tests performed for getting copper ion beams. Resonant ionization through laser is also used in the spectroscopy experiments performed at the Isolde (isotope separation on-line device) installation in CERN where more than 20 elements are ionized very efficiently. The technique is based on a frequency scanning around the excitation transition of the atoms in order to probe the hyperfine structure. Laser spectroscopy allows the determination of the hyperfine structure as well as the isotopic shift of atoms. In the third chapter the method is applied to the spectroscopy of tellurium atoms. First, we define the 2 parameters on which the extraction is based: charge radius and nuclear moments, then we present several theoretical models that we have used to assess our experimental results. (A.C.)

  5. Welding studs detection based on line structured light

    Science.gov (United States)

    Geng, Lei; Wang, Jia; Wang, Wen; Xiao, Zhitao

    2018-01-01

    The quality of welding studs is significant for installation and localization of components of car in the process of automobile general assembly. A welding stud detection method based on line structured light is proposed. Firstly, the adaptive threshold is designed to calculate the binary images. Then, the light stripes of the image are extracted after skeleton line extraction and morphological filtering. The direction vector of the main light stripe is calculated using the length of the light stripe. Finally, the gray projections along the orientation of the main light stripe and the vertical orientation of the main light stripe are computed to obtain curves of gray projection, which are used to detect the studs. Experimental results demonstrate that the error rate of proposed method is lower than 0.1%, which is applied for automobile manufacturing.

  6. BCal: an on-line Bayesian radiocarbon calibration tool

    Directory of Open Access Journals (Sweden)

    Caitlin E. Buck

    1999-09-01

    Full Text Available In this paper we describe newly launched software for on-line Bayesian calibration of archaeological radiocarbon determinations. The software is known as BCal and we invite members of the world-wide archaeological research community to use it should they so wish. All that is required to gain access to the software is a computer connected to the Internet with a modern World-wide Web browser (of the sort you are probably using to read this. BCal does not require access to any additional 'Plug-ins' on your machine. Since the computations needed to obtain the calibrations are undertaken on the BCal server, if you have enough computer power to run your World-wide Web browser you have enough power to use BCal.

  7. An on-line method in studying music parsing.

    Science.gov (United States)

    Berent, I; Perfetti, C A

    1993-03-01

    Listening to music entails the construction of a mental representation based on partial and ambiguous information. This study examines an experimental method that reflects such parsing decisions on-line by detecting the cognitive load resulting from temporary parsing failures. The method investigated was a divided attention paradigm in which listening to music was the primary task and click detection was a concurrent secondary task. It was hypothesized that increasing the complexity of the primary task by introducing an unprepared chromatic modulation results in an increase in response latencies to a click presented immediately after the modulatory shift. The support of this prediction by musicians' data provides evidence for the sensitivity of the paradigm. The failure of non-musicians to reflect the expected load is attributed to their attention-allocation strategy. These results are discussed in terms of their implications on the view of the musical parser as deterministic.

  8. On-line Dynamic Security Assessment in Power Systems

    DEFF Research Database (Denmark)

    Weckesser, Johannes Tilman Gabriel

    angular divergence of a group of generators can cause critical voltage sags at certain buses in the system. In this thesis assessment of such voltage sags using two types of sensitivities, which are derived from the algebraic network equations, is proposed. These sensitivities are derived after an in......-depth study of the mechanism causing the voltage sags. The first sensitivity type is called load voltage i/xii sensitivity and allows identifying which bus voltages are affected by a change in rotor angle of a particular generator. The second proposed type is called generator power sensitivity, which provides...... for early prediction of critical voltage sags is described. The method’s performance is compared to other prediction approaches. The results show that the proposed method succeeds in early, accurately and consistently predicting critically low voltage sags. An efficient on-line DSA not only identifies...

  9. On-line Core Monitoring at the Beznau PWRs

    Energy Technology Data Exchange (ETDEWEB)

    Caruso, S. [Nordostschweizerische Kraftwerke AG, Kernkraftwerk Beznau, Abt. Reaktor und Sicherheit, CH-5312 Doettingen (Switzerland)

    2008-07-01

    Reactor operational tools assist the reactor operators and engineers in understanding the observed behaviour of the core and, if necessary, to accordingly act to maintain the reactor into requested margins. Especially important is to recognize deviations from the expected behaviour as predicted by core physics calculations. In the present paper an overview of the on-line core monitoring and analysis system used at the Beznau PWRs is illustrated. This core surveillance system, GARDEL, combines advanced prediction tools (CASMO-4/SIMULATE-3) for 3D core simulation with an efficient monitoring system. Zero power start-up physics tests and typical measurements as neutron flux maps, periodically performed with in-core detectors during the cycle, allow the determination of the most important parameters and the possibility to quantify the deviations from the predictions. A benchmark between predictions and measurements is reported here, showing an excellent accuracy in the method used. (author)

  10. A versatile apparatus for on-line emission channeling experiments

    CERN Document Server

    da Silva, Manuel Ribeiro; Correia, João Guilherme; Amorim, Lígia Marina; Pereira, Lino Miguel da Costa

    2013-01-01

    The concept and functionality of an apparatus dedicated to emission channeling experiments using short-lived isotopes on-line at ISOLDE/CERN is described. The setup is assembled in two functional blocks - (a) base stand including beam collimation, implantation and measurement chamber, cryogenic extension, and vacuum control system and - (b) Panmure goniometer extension including maneuvering cradle and sample heating furnace. This setup allows for in situ implantation and sample analysis in the as-implanted state and upon cooling down to 50 K and during annealing up to 1200 K. The functionality of the setup will be illustrated with the example of establishing the lattice location of $^{56}$Mn probes implanted into GaAs.

  11. 3rd Computer Science On-line Conference

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

    2014-01-01

    This book is based on the research papers presented in the 3rd Computer Science On-line Conference 2014 (CSOC 2014).   The conference is intended to provide an international forum for discussions on the latest high-quality research results in all areas related to Computer Science. The topics addressed are the theoretical aspects and applications of Artificial Intelligences, Computer Science, Informatics and Software Engineering.   The authors provide new approaches and methods to real-world problems, and in particular, exploratory research that describes novel approaches in their field. Particular emphasis is laid on modern trends in selected fields of interest. New algorithms or methods in a variety of fields are also presented.   This book is divided into three sections and covers topics including Artificial Intelligence, Computer Science and Software Engineering. Each section consists of new theoretical contributions and applications which can be used for the further development of knowledge of everybod...

  12. Issues for Bringing Electron Beam Irradiators On-Line

    Energy Technology Data Exchange (ETDEWEB)

    Kaye, R.J.; Turman, B.N.

    1999-04-20

    Irradiation of red meat and poultry has been approved by the U.S. FDA, and the U.S. Department of Agriculture's rule for processing red meat is out for comment. Looking beyond the current issues of packaging materials, labeling, and consumer acceptance, this paper reviews the next step of implementation and how to remove, or at least reduce, the barriers to utilization. Polls of the user community identified their requirements for electron beam or x-ray processing of meat or poultry and their concerns about implementation for on-line processing. These needs and issues are compared to the capabilities of the accelerator industry. The critical issues of beam utilization and dose uniformity, factors affecting floor space requirements, and treatment costs are examined.

  13. Cool baghouse spaces for on-line M and R

    Energy Technology Data Exchange (ETDEWEB)

    McGraw, M.G.

    1979-07-15

    The design, installation, operation, maintenance and repair experience since 1973 of baghouses at the Pennsylvania Power and Light Co. and the Southwest Public Service Co. (SPS) in Amarillo, Texas are reviewed. The particulate removal efficiency of these fiber-glass fabric filter baghouses has averaged from 99.91 to 99.94%, bag failure has been minimal, cleaning by reversing air flow through the bags has proved effective and fast, and these units permit on-line maintenance as compared with the shut-down maintenance requirement for other stack pollution control equipment. The largest baghouse in operation has 28 compartments with 204 bags each at a 350 MW coal-fired SPS plant. Baghouse installation at a 543-MW plant is planned, and other utilities are increasingly using this pollution control method. (LCL)

  14. Review of Worcestershire On-line Fabric Type Series website

    Directory of Open Access Journals (Sweden)

    Beverley Nenk

    2003-06-01

    Full Text Available The study of archaeological ceramics is advanced through the creation and development of regional and national pottery type-series, which contain samples of each type of pottery identified from a particular area or region. Pottery researchers working in any period, from prehistoric to post-medieval, require access to such type-series, and to their associated data, in order to be able to advance the identification of all types of pottery, not only those types produced in the local area, but those produced in surrounding regions, as well as those imported from abroad. The publication of such type-series, as well as their accessibility to researchers, is essential if the information they contain is to be disseminated. The development of the Worcestershire On-Line Fabric Type Series is the first stage in a remarkable project designed to make the complete fabric and form type series for Worcestershire ceramics accessible on the internet. As part of the Historic Environment Record for Worcestershire, formerly the Sites and Monuments Record, it is designed to improve access to finds and environmental data, with the aim of encouraging and facilitating research. Funded by Worcestershire County Council as part of its commitment to e-government, it is being developed by Worcestershire County Council Archaeology Service with OxfordArchDigital. It is one of a proposed series of on-line specialist resources (to include, for example, clay pipes, environmental archaeology, flint tools, historic buildings, which are also designed to stand alone as research tools. The ceramics website is the first part of Pottery in Perspective, a web-based project to provide information on the pottery used and made in Worcestershire from prehistory to c. 1900AD.

  15. Centrifugal Separation of Antiprotons and Electrons

    CERN Document Server

    Gabrielse, G; McConnell, R; Richerme, P; Wrubel, J; Kalra, R; Novitski, E; Grzonka, D; Oelert, W; Sefzick, T; Zielinski, M; Borbely, J S; Fitzakerley, D; George, M C; Hessels, E A; Storry, C H; Weel, M; Mullers, A; Walz, J; Speck, A

    2010-01-01

    Centrifugal separation of antiprotons and electrons is observed, the first such demonstration with particles that cannot be laser cooled or optically imaged. The spatial separation takes place during the electron cooling of trapped antiprotons, the only method available to produce cryogenic antiprotons for precision tests of fundamental symmetries and for cold antihydrogen studies. The centrifugal separation suggests a new approach for isolating low energy antiprotons and for producing a controlled mixture of antiprotons and electrons.

  16. On-line chemical composition analyzer development. Phase 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, M.J.; Garrison, A.A.; Muly, E.C.; Moore, C.F.

    1992-02-01

    The energy consumed in distillation processes in the United States represents nearly three percent of the total national energy consumption. If effective control of distillation columns can be accomplished, it has been estimated that it would result in a reduction in the national energy consumption of 0.3%. Real-time control based on mixture composition could achieve these savings. However, the major distillation processes represent diverse applications and at present there does not exist a proven on-line chemical composition sensor technology which can be used to control these diverse processes in real-time. This report presents a summary of the findings of the second phase of a three phase effort undertaken to develop an on-line real-time measurement and control system utilizing Raman spectroscopy. A prototype instrument system has been constructed utilizing a Perkin Elmer 1700 Spectrometer, a diode pumped YAG laser, two three axis positioning systems, a process sample cell land a personal computer. This system has been successfully tested using industrially supplied process samples to establish its performance. Also, continued application development was undertaken during this Phase of the program using both the spontaneous Raman and Surface-enhanced Raman modes of operation. The study was performed for the US Department of Energy, Office of Industrial Technologies, whose mission is to conduct cost-shared R&D for new high-risk, high-payoff industrial energy conservation technologies. Although this document contains references to individual manufacturers and their products, the opinions expressed on the products reported do not necessarily reflect the position of the Department of Energy.

  17. Improving the Selectivity of the ISOLDE Resonance Ionization Laser Ion Source and In-Source Laser Spectroscopy of Polonium

    CERN Document Server

    Fink, Daniel Andreas; Jochim, Selim

    Exotic atomic nuclei far away from stability are fascinating objects to be studied in many scientic elds such as atomic-, nuclear-, and astrophysics. Since these are often short-lived isotopes, it is necessary to couple their production with immediate extraction and delivery to an experiment. This is the purpose of the on-line isotope separator facility, ISOLDE, at CERN. An essential aspect of this laboratory is the Resonance Ionization Laser Ion Source (RILIS) because it provides a fast and highly selective means of ionizing the reaction products. This technique is also a sensitive laser-spectroscopy tool for the development and improvement of electron excitation schemes for the resonant laser photoionization and the study of the nuclear structure or fundamental atomic physics. Each of these aspects of the RILIS applications are subjects of this thesis work: a new device for the suppression of unwanted surface ionized contaminants in RILIS ion beams, known as the Laser Ion Source and Trap (LIST), was impleme...

  18. Lasers in materials processing

    Energy Technology Data Exchange (ETDEWEB)

    Davis, J.I.; Rockower, E.B.

    1981-01-01

    A status report on the uranium Laser Isotope Separation (LIS) Program at the Lawrence Livermore National Laboratory is presented. Prior to this status report, process economic analysis is presented so as to understand how the unique properties of laser photons can be best utilized in the production of materials and components despite the high cost of laser energy. The characteristics of potential applications that are necessary for success are identified, and those factors that have up to now frustrated attempts to find commercially viable laser induced chemical and physical process for the production of new or existing materials are pointed out.

  19. On-line Homework/Quiz/Exam applet: freely available Java software for evaluating performance on line.

    Science.gov (United States)

    Gordon, Oakley E; Malloy, Thomas E

    2002-05-01

    The Homework/Quiz/Exam applet is a freely available Java program that can be used to evaluate student performance on line for any content authored by a teacher. It has database connectivity so that student scores are automatically recorded. It allows several different types of questions. Each question can be linked to images and detailed story problems. Three levels of feedback are provided to student responses. It allows teachers to randomize the sequence of questions and to randomize which of several options is the correct answer in multiple-choice questions. The creation and editing of questions involves menu selections, button-presses, and the typing of content; no programming knowledge is required. The code is open source in order to encourage modifications that will meet individual pedagogical needs.

  20. Selective on-line detection of boronic acids and derivatives in high-performance liquid chromatography eluates by post-column reaction with alizarin

    NARCIS (Netherlands)

    Duval, F.L.; Wardani, P.A.; Zuilhof, H.; Beek, van T.A.

    2015-01-01

    An on-line high-performance liquid chromatography (HPLC) method for the rapid and selective detection of boronic acids in complex mixtures was developed. After optimization experiments at an HPLC flow rate of 0.40 mL/min, the HPLC-separated analytes were mixed post-column with a solution of 75 µM

  1. Development of an on-line high performance liquid chromatography detection system for human cytochrome P450 1A2 inhibitors in extracts of natural products

    NARCIS (Netherlands)

    Jeurissen, S.M.F.; Claassen, F.W.; Havlik, J.; Bouwmans, E.E.; Cnubben, N.H.P.; Sudhölter, E.J.R.; Rietjens, I.M.C.M.; Beek, T.A. van

    2007-01-01

    An on-line HPLC screening method for detection of inhibitors of human cytochrome P450 1A2 in extracts was developed. HPLC separation of extracts is connected to a continuous methoxyresorufin-O-demethylation (MROD) assay in which recombinant human P450 1A2 converts methoxyresorufin to its fluorescent

  2. Penning-trap Q-value determination of the Ga-71(v, e(-))Ge-71 reaction using threshold charge breeding of on-line produced isotopes

    NARCIS (Netherlands)

    Frekers, D.; Simon, M.C.; Andreoiu, C.; Bale, J. C.; Brodeur, M.; Brunner, T.; Chaudhuri, A.; Chowdhury, U.; Lopez-Urrutia, J. R. Crespo; Delheij, P.; Ejiri, H.; Ettenauer, S.; Gallant, A. T.; Gavrin, V.; Grossheim, A.; Harakeh, M. N.; Jang, F.; Kwiatkowski, A. A.; Lassen, J.; Lennarz, A.; Luichtl, M.; Ma, T.; Macdonald, T. D.; Mane, E.; Robertson, D.; Schultz, B. E.; Simon, V. V.; Teigelhoefer, A.; Dilling, J.

    2013-01-01

    We present a first direct Q-value measurement of the Ga-71(v, e(-))Ge-71 reaction using the TITAN mass-measurement facility at ISAC/TRIUMF. The measurements were performed in a Penning trap on neon-like Ga-71(21+) and Ge-71(22+) using isobar separation of the on-line produced mother and daughter

  3. Evaluation of fritless solid-phase extraction coupled on-line with capillary electrophoresis-mass spectrometry for the analysis of opioid peptides in cerebrospinal fluid

    NARCIS (Netherlands)

    Medina-Casanellas, Silvia; Tak, Yvonne H; Benavente, Fernando; Sanz-Nebot, Victoria; Sastre Toraño, Javier; Somsen, Govert W; de Jong, Gerhardus J

    2014-01-01

    Fritless SPE on-line coupled to CE with UV and MS detection (SPE-CE-UV and SPE-CE-MS) was evaluated for the analysis of opioid peptides. A microcartridge of 150 μm id was packed with a C18 sorbent (particle size > 50 μm), which was retained between a short inlet capillary and a separation capillary

  4. Determination of thromboxanes, leukotrienes and lipoxins using high-temperature capillary liquid chromatography-tandem mass spectrometry and on-line sample preparation

    DEFF Research Database (Denmark)

    Dahl, Sandra Rinne; Kleiveland, Charlotte Ramstad; Kassem, Moustapha

    2009-01-01

    culture supernatants was developed and validated. In the present method, a high temperature (70 degrees C) was used for the separation on the analytical column to obtain efficient chromatography of the thromboxanes. An on-line sample preparation was performed, where peptides/proteins contained...

  5. On-Line Electrochemical Reduction of Disulfide Bonds: Improved FTICR-CID and -ETD Coverage of Oxytocin and Hepcidin

    Science.gov (United States)

    Nicolardi, Simone; Giera, Martin; Kooijman, Pieter; Kraj, Agnieszka; Chervet, Jean-Pierre; Deelder, André M.; van der Burgt, Yuri E. M.

    2013-12-01

    Particularly in the field of middle- and top-down peptide and protein analysis, disulfide bridges can severely hinder fragmentation and thus impede sequence analysis (coverage). Here we present an on-line/electrochemistry/ESI-FTICR-MS approach, which was applied to the analysis of the primary structure of oxytocin, containing one disulfide bridge, and of hepcidin, containing four disulfide bridges. The presented workflow provided up to 80 % (on-line) conversion of disulfide bonds in both peptides. With minimal sample preparation, such reduction resulted in a higher number of peptide backbone cleavages upon CID or ETD fragmentation, and thus yielded improved sequence coverage. The cycle times, including electrode recovery, were rapid and, therefore, might very well be coupled with liquid chromatography for protein or peptide separation, which has great potential for high-throughput analysis.

  6. On-line diagnostics of washing machines: design issues for the optimization of the measurement set-up

    Science.gov (United States)

    Agostinelli, G.; Paone, N.; Cristalli, C.; Torcianti, B.

    2008-06-01

    This paper discusses some of the relevant aspects that a designer of an on-line test station for washing machine diagnostics based on a single-point laser Doppler vibrometer should consider. In particular, the paper presents a series of experiments useful to answer the two following questions: a) Where to locate the measurement point? b) Does the test need to be done with an external load to be inserted into the rotating drum? Tests have been done on a "good" washing machine and on a machine exhibiting the most frequent defects to be detected in production line. The study of the Operating Deflection Shapes (ODS) of the machine has been used to determine the best area of the machine cabinet where to position the single point laser vibrometer for on-line diagnostics. In order to support the decision whether or not to employ an artificial unbalance load inserted into the drum during the dynamic test, measurements have been repeated with and without load. Results have been analysed to highlight pros and cons of the use of an external load.

  7. Printed Spacecraft Separation System

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R [ORNL; Holmans, Walter [Planetary Systems Corporation

    2016-10-01

    In this project Planetary Systems Corporation proposed utilizing additive manufacturing (3D printing) to manufacture a titanium spacecraft separation system for commercial and US government customers to realize a 90% reduction in the cost and energy. These savings were demonstrated via “printing-in” many of the parts and sub-assemblies into one part, thus greatly reducing the labor associated with design, procurement, assembly and calibration of mechanisms. Planetary Systems Corporation redesigned several of the components of the separation system based on additive manufacturing principles including geometric flexibility and the ability to fabricate complex designs, ability to combine multiple parts of an assembly into a single component, and the ability to optimize design for specific mechanical property targets. Shock absorption was specifically targeted and requirements were established to attenuate damage to the Lightband system from shock of initiation. Planetary Systems Corporation redesigned components based on these requirements and sent the designs to Oak Ridge National Laboratory to be printed. ORNL printed the parts using the Arcam electron beam melting technology based on the desire for the parts to be fabricated from Ti-6Al-4V based on the weight and mechanical performance of the material. A second set of components was fabricated from stainless steel material on the Renishaw laser powder bed technology due to the improved geometric accuracy, surface finish, and wear resistance of the material. Planetary Systems Corporation evaluated these components and determined that 3D printing is potentially a viable method for achieving significant cost and savings metrics.

  8. Antioxidant activity assays on-line with liquid chromatography

    NARCIS (Netherlands)

    Niederlander, Harm A. G.; van Beek, Teris A.; Bartasiute, Aiste; Koieva, Irina I.

    2008-01-01

    Screening for antioxidants requires simple in vitro model systems to investigate antioxidant activity. High resolution screening (HRS), combining a separation technique like HPLC with fast post-column (bio)chemical detection can rapidly pinpoint active compounds in complex mixtures. In this paper

  9. Long-term evaluation of on-line sensors for determination of moisture in biomass; Laangtidsutvaerdering av nya on-line fukthaltsmaetare foer biobraensle

    Energy Technology Data Exchange (ETDEWEB)

    Nystroem, Jenny; Axrup, Lars; Dahlquist, Erik

    2002-02-01

    The tests have shown, that it is possible to measure wood moisture at a conveyor with a resolution of approximately 0. 1 %, and an 'absolute' measurement of approximately 0.5 %, with the NIR method. This was for varying wood compositions. Also data from frozen biomass was included in model building. For the Radio frequency scan method the bulk moisture has been measured with a resolution around 0.2% in a container and with an absolute moisture measurement of approximately 0.5 %. This was achieved during a time period in January to March, when the wood mix was relatively constant, and using the model made from the container tests. For the on-line measurement the accuracy was lower, as it was difficult to vary the moisture content and to separate the effect of wood mix from the moisture content. When the dried wood content was increased in April-May, wood mix and moisture varied together. As they were correlated, the model became poor. The uncertainty of the lab samples is in the range of 0.35 %. The moisture content in the wood/bark mixture varied only between 50 and 53 percent in January - March, with just a few values outside this range. This is too little to produce a good model. To get a larger moisture variation, the content of dried wood was increased successively during April-May. Unfortunately we could not achieve any independent variation of biomass mix and moisture in this way, and the model did not improve. Because of this tests were also performed in a 25-30 m{sup 3} container as a complement. Here the variation in moisture content was 38- 58 percent, and with independently varied wood mixtures (moist wood, dried wood and bark) as well. This model then was used to make moisture calculations from the on-line radio frequency spectra. It is interesting to notice, that a calibration model from the container tests could be transferred directly to the fuel tower, although a very different geometry for the radio frequency scan method, and to the

  10. In-Source Laser Spectroscopy with the Laser Ion Source and Trap: First Direct Study of the Ground-State Properties of Po,219217

    Science.gov (United States)

    Fink, D. A.; Cocolios, T. E.; Andreyev, A. N.; Antalic, S.; Barzakh, A. E.; Bastin, B.; Fedorov, D. V.; Fedosseev, V. N.; Flanagan, K. T.; Ghys, L.; Gottberg, A.; Huyse, M.; Imai, N.; Kron, T.; Lecesne, N.; Lynch, K. M.; Marsh, B. A.; Pauwels, D.; Rapisarda, E.; Richter, S. D.; Rossel, R. E.; Rothe, S.; Seliverstov, M. D.; Sjödin, A. M.; Van Beveren, C.; Van Duppen, P.; Wendt, K. D. A.

    2015-01-01

    A Laser Ion Source and Trap (LIST) for a thick-target, isotope-separation on-line facility has been implemented at CERN ISOLDE for the production of pure, laser-ionized, radioactive ion beams. It offers two modes of operation, either as an ion guide, which performs similarly to the standard ISOLDE resonance ionization laser ion source (RILIS), or as a more selective ion source, where surface-ionized ions from the hot ion-source cavity are repelled by an electrode, while laser ionization is done within a radio-frequency quadrupole ion guide. The first physics application of the LIST enables the suppression of francium contamination in ion beams of neutron-rich polonium isotopes at ISOLDE by more than 1000 with a reduction in laser-ionization efficiency of only 20. Resonance ionization spectroscopy is performed directly inside the LIST device, allowing the study of the hyperfine structure and isotope shift of 217Po for the first time. Nuclear decay spectroscopy of 219Po is performed for the first time, revealing its half-life, α -to-β -decay branching ratio, and α -particle energy. This experiment demonstrates the applicability of the LIST at radioactive ion-beam facilities for the production and study of pure beams of exotic isotopes.

  11. In-Source Laser Spectroscopy with the Laser Ion Source and Trap: First Direct Study of the Ground-State Properties of ^{217,219}Po

    Directory of Open Access Journals (Sweden)

    D. A. Fink

    2015-02-01

    Full Text Available A Laser Ion Source and Trap (LIST for a thick-target, isotope-separation on-line facility has been implemented at CERN ISOLDE for the production of pure, laser-ionized, radioactive ion beams. It offers two modes of operation, either as an ion guide, which performs similarly to the standard ISOLDE resonance ionization laser ion source (RILIS, or as a more selective ion source, where surface-ionized ions from the hot ion-source cavity are repelled by an electrode, while laser ionization is done within a radio-frequency quadrupole ion guide. The first physics application of the LIST enables the suppression of francium contamination in ion beams of neutron-rich polonium isotopes at ISOLDE by more than 1000 with a reduction in laser-ionization efficiency of only 20. Resonance ionization spectroscopy is performed directly inside the LIST device, allowing the study of the hyperfine structure and isotope shift of ^{217}Po for the first time. Nuclear decay spectroscopy of ^{219}Po is performed for the first time, revealing its half-life, α-to-β-decay branching ratio, and α-particle energy. This experiment demonstrates the applicability of the LIST at radioactive ion-beam facilities for the production and study of pure beams of exotic isotopes.

  12. Wood chip moisture on-line measurement system based on the combination of the different methods

    Energy Technology Data Exchange (ETDEWEB)

    Jaervinen, T. (VTT Technical Research Centre of Finland, Jyvaeskylae (Finland)); Teppola, P.; Siikanen, S. (VTT Technical Research Centreof Finland, Kuopio (Finland)); Malinen, J.; Hietala, E. (VTT Technical Research Centre of Finland, Oulu (Finland)); Tiitta, M.; Tomppo, L. (Univ. of Kuopio, Dept. of Physics (Finland)), email: markku.tiitta@uku.fi

    2009-07-01

    The aim of the project is to develop wood chip moisture on-line measurement system based on the combination of different methods based on use of nir-, impedance- and radiometric devices. All the measurements were installed in PDU-scale conveyor facility, which can be used for development and testing fuel and bulk material quality and property measurement technology and devices. The system enables to achieve accurate reference moisture content data within sufficient wide range of moisture content variation in full-scale. The usability and accuracy of the separate measurement methods were studied by testing in variable conditions. As a result, the best combination of different methods for each purpose is proposed. The actual system will be implemented in a separate new project under preparation. Good usability and wide range of applicability is prerequisite for the combination system to be used in variable ambient conditions for different types of wood chip like chips for pulping and logging residue chips and even to other biomass materials. (orig.)

  13. Automation and integration of multiplexed on-line sample preparation with capillary electrophoresis for DNA sequencing

    Energy Technology Data Exchange (ETDEWEB)

    Tan, H.

    1999-03-31

    The purpose of this research is to develop a multiplexed sample processing system in conjunction with multiplexed capillary electrophoresis for high-throughput DNA sequencing. The concept from DNA template to called bases was first demonstrated with a manually operated single capillary system. Later, an automated microfluidic system with 8 channels based on the same principle was successfully constructed. The instrument automatically processes 8 templates through reaction, purification, denaturation, pre-concentration, injection, separation and detection in a parallel fashion. A multiplexed freeze/thaw switching principle and a distribution network were implemented to manage flow direction and sample transportation. Dye-labeled terminator cycle-sequencing reactions are performed in an 8-capillary array in a hot air thermal cycler. Subsequently, the sequencing ladders are directly loaded into a corresponding size-exclusion chromatographic column operated at {approximately} 60 C for purification. On-line denaturation and stacking injection for capillary electrophoresis is simultaneously accomplished at a cross assembly set at {approximately} 70 C. Not only the separation capillary array but also the reaction capillary array and purification columns can be regenerated after every run. DNA sequencing data from this system allow base calling up to 460 bases with accuracy of 98%.

  14. On-line monitoring of methane in sewer air.

    Science.gov (United States)

    Liu, Yiwen; Sharma, Keshab R; Murthy, Sudhir; Johnson, Ian; Evans, Ted; Yuan, Zhiguo

    2014-10-16

    Methane is a highly potent greenhouse gas and contributes significantly to climate change. Recent studies have shown significant methane production in sewers. The studies conducted so far have relied on manual sampling followed by off-line laboratory-based chromatography analysis. These methods are labor-intensive when measuring methane emissions from a large number of sewers, and do not capture the dynamic variations in methane production. In this study, we investigated the suitability of infrared spectroscopy-based on-line methane sensors for measuring methane in humid and condensing sewer air. Two such sensors were comprehensively tested in the laboratory. Both sensors displayed high linearity (R(2) > 0.999), with a detection limit of 0.023% and 0.110% by volume, respectively. Both sensors were robust against ambient temperature variations in the range of 5 to 35°C. While one sensor was robust against humidity variations, the other was found to be significantly affected by humidity. However, the problem was solved by equipping the sensor with a heating unit to increase the sensor surface temperature to 35°C. Field studies at three sites confirmed the performance and accuracy of the sensors when applied to actual sewer conditions, and revealed substantial and highly dynamic methane concentrations in sewer air.

  15. EXPANDING ACADEMIC VOCABULARY WITH AN INTERACTIVE ON-LINE DATABASE

    Directory of Open Access Journals (Sweden)

    Marlise Horst

    2005-05-01

    Full Text Available University students used a set of existing and purpose-built on-line tools for vocabulary learning in an experimental ESL course. The resources included concordance, dictionary, cloze-builder, hypertext, and a database with interactive self-quizzing feature (all freely available at www.lextutor.ca. The vocabulary targeted for learning consisted of (a Coxhead's (2000 Academic Word List, a list of items that occur frequently in university textbooks, and (b unfamiliar words students had met in academic texts and selected for entry into the class database. The suite of tools were designed to foster retention by engaging learners in deep processing, an aspect that is often described as missing in computer exercises for vocabulary learning. Database entries were examined to determine whether context sentences supported word meanings adequately and whether entered words reflected the unavailability of cognates in the various first languages of the participants. Pre- and post-treatment performance on tests of knowledge of words targeted for learning in the course were compared to establish learning gains. Regression analyses investigated connections between use of specific computer tools and gains.

  16. Effects of Requiring Students to Meet High Expectation Levels within an On-Line Homework Environment

    Science.gov (United States)

    Weber, William J., Jr.

    2010-01-01

    On-line homework is becoming a larger part of mathematics classrooms each year. Thus, ways to maximize the effectiveness of on-line homework for both students and teachers must be investigated. This study sought to provide one possible answer to this aim, by requiring students to achieve at least 50% for any on-line homework assignment in order to…

  17. 7 CFR 42.143 - Operating Characteristic (OC) curves for on-line sampling and inspection.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Operating Characteristic (OC) curves for on-line... Miscellaneous § 42.143 Operating Characteristic (OC) curves for on-line sampling and inspection. (a) This section contains the Operating Characteristic (OC) curve for each of the on-line cumulative sum sampling...

  18. 21 CFR 870.4330 - Cardiopulmonary bypass on-line blood gas monitor.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass on-line blood gas monitor. 870.4330 Section 870.4330 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... Cardiopulmonary bypass on-line blood gas monitor. (a) Identification. A cardiopulmonary bypass on-line blood gas...

  19. The effect of family therapy on the changes in the severity of on-line game play and brain activity in adolescents with on-line game addiction.

    Science.gov (United States)

    Han, Doug Hyun; Kim, Sun Mi; Lee, Young Sik; Renshaw, Perry F

    2012-05-31

    We evaluated whether a brief 3-week family therapy intervention would change patterns of brain activation in response to affection and gaming cues in adolescents from dysfunctional families who met criteria for on-line game addiction. Fifteen adolescents with on-line game addiction and fifteen adolescents without problematic on-line game play and an intact family structure were recruited. Over 3 weeks, families were asked to carry out homework assignments focused on increasing family cohesion for more than 1 hour/day and 4 days/week. Before therapy, adolescents with on-line game addiction demonstrated decreased activity as measured by functional magnetic resonance imaging (fMRI) within the caudate, middle temporal gyrus, and occipital lobe in response to images depicting parental affection and increased activity of the middle frontal and inferior parietal in response scenes from on-line games, relative to healthy comparison subjects. Improvement in perceived family cohesion following 3 weeks of treatment was associated with an increase in the activity of the caudate nucleus in response to affection stimuli and was inversely correlated with changes in on-line game playing time. With evidence of brain activation changes in response to on-line game playing cues and images depicting parental love, the present findings suggest that family cohesion may be an important factor in the treatment of problematic on-line game playing. Crown Copyright © 2012. Published by Elsevier Ireland Ltd. All rights reserved.

  20. The effect of family therapy on the changes in the severity of on-line game play and brain activity in adolescents with on-line game addiction

    Science.gov (United States)

    Han, Doug Hyun; Kim, Sun Mi; Lee, Young Sik; Renshaw, Perry F.

    2015-01-01

    We evaluated whether a brief 3-week family therapy intervention would change patterns of brain activation in response to affection and gaming cues in adolescents from dysfunctional families who met criteria for on-line game addiction. Fifteen adolescents with on-line game addiction and fifteen adolescents without problematic on-line game play and an intact family structure were recruited. Over 3 weeks, families were asked to carry out homework assignments focused on increasing family cohesion for more than 1 hour/day and 4 days/week. Before therapy, adolescents with on-line game addiction demonstrated decreased activity as measured by functional magnetic resonance imaging (fMRI) within the caudate, middle temporal gyrus, and occipital lobe in response to images depicting parental affection and increased activity of the middle frontal and inferior parietal in response scenes from on-line games, relative to healthy comparison subjects. Improvement in perceived family cohesion following 3 weeks of treatment was associated with an increase in the activity of the caudate nucleus in response to affection stimuli and was inversely correlated with changes in on-line game playing time. With evidence of brain activation changes in response to on-line game playing cues and images depicting parental love, the present findings suggest that family cohesion may be an important factor in the treatment of problematic on-line game playing. PMID:22698763

  1. On-line affinity selection of histidine-containing peptides using a polymeric monolithic support for capillary electrophoresis.

    Science.gov (United States)

    Vizioli, Nora M; Rusell, Maria Lucía; Carbajal, Maria Laura; Carducci, Clyde N; Grasselli, Mariano

    2005-08-01

    An on-line affinity selection method using a polymeric monolithic support is proposed for the retention of histidine-containing peptides and their subsequent separation by capillary zone electrophoresis (CZE). Monolithic capillary columns were prepared in fused-silica capillaries of 150 mum inner diameter (ID) by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iminodiacetic acid (IDA) and copper ion. Monolithic microextractors were coupled on-line near the inlet of the separation capillary (fused-silica capillary, 75 mum ID x 28 cm from the microextractor to the detector). Model peptide mixtures of histidine-containing and histidine-noncontaining peptides were assessed. Peptides were released from the sorbent by a 5 mM imidazole solution and then separated by CZE with ultraviolet detection. Relative standard deviation values for migration times and corrected peak areas were found to be lower than 5.8 and 10.5%, respectively. IDA-Cu(II) ion modified monolithic microextractors showed a chromatographic behavior and could be reused at least 25 times. The use of monolithic supports proved to be an advantageous alternative to packed particles for the preparation of microextractors.

  2. Isotope separation and advanced manufacturing technology

    Science.gov (United States)

    Carpenter, J.; Kan, T.

    This is the fourth issue of a semiannual report for the Isotope Separation and Advanced Materials Manufacturing (ISAM) Technology Program at Lawrence Livermore National Laboratory. Primary objectives include: (1) the Uranium Atomic Vapor Laser Isotope Separation (UAVLIS) process, which is being developed and prepared for deployment as an advanced uranium enrichment capability; (2) Advanced manufacturing technologies, which include industrial laser and E-beam material processing and new manufacturing technologies for uranium, plutonium, and other strategically important materials in support of DOE and other national applications. This report features progress in the ISAM Program from October 1993 through March 1994.

  3. Monitoring the metering performance of an electronic voltage transformer on-line based on cyber-physics correlation analysis

    Science.gov (United States)

    Zhang, Zhu; Li, Hongbin; Tang, Dengping; Hu, Chen; Jiao, Yang

    2017-10-01

    Metering performance is the key parameter of an electronic voltage transformer (EVT), and it requires high accuracy. The conventional off-line calibration method using a standard voltage transformer is not suitable for the key equipment in a smart substation, which needs on-line monitoring. In this article, we propose a method for monitoring the metering performance of an EVT on-line based on cyber-physics correlation analysis. By the electrical and physical properties of a substation running in three-phase symmetry, the principal component analysis method is used to separate the metering deviation caused by the primary fluctuation and the EVT anomaly. The characteristic statistics of the measured data during operation are extracted, and the metering performance of the EVT is evaluated by analyzing the change in statistics. The experimental results show that the method successfully monitors the metering deviation of a Class 0.2 EVT accurately. The method demonstrates the accurate evaluation of on-line monitoring of the metering performance on an EVT without a standard voltage transformer.

  4. Laser system for measuring small changes in plasma tracer concentrations.

    Science.gov (United States)

    Klaesner, J W; Pou, N A; Parker, R E; Galloway, R L; Roselli, R J

    1996-01-01

    The authors developed a laser-diode system that can be used for on-line optical concentration measurements in physiologic systems. Previous optical systems applied to whole blood have been hampered by artifacts introduced by red blood cells (RBCs). The system introduced here uses a commercially available filter cartridge to separate RBCs from plasma before plasma concentration measurements are made at a single wavelength. The filtering characteristics of the Cellco filter cartridge (#4007-10, German-town, MD) were adequate for use in the on-line measurement system. The response time of the filter cartridge was less than 40 seconds, and the sieving characteristics of the filter for macromolecules were excellent, with filtrate-to-plasma albumin ratios of 0.98 +/- 0.11 for studies in sheep and 0.94 +/- 0.15 for studies in dogs. The 635-nm laser diode system developed was shown to be more sensitive than the spectrophotometer used in previous studies (Klaesner et al., Annals of Biomedical Engineering, 1994; 22, 660-73). The new system was used to measure the product of filtration coefficient (Kfc) and reflection coefficient for albumin (delta f) in an isolated canine lung preparation. The delta fKfc values [mL/(cmH2O.min.100 g dry lung weight)] measured with the laser diode system (0.33 +/- 0.22) compared favorably with the delta fKfc obtained using a spectrophotometer (0.27 +/- 0.20) and with the Kfc obtained using the blood-corrected gravimetric method (0.32 +/- 0.23). Thus, this new optical system was shown to accurately measure plasma concentration changes in whole blood for physiologic levels of Kfc. The same system can be used with different optical tracers and different source wavelengths to make optical plasma concentration measurements for other physiologic applications.

  5. Coupled optical resonance laser locking.

    Science.gov (United States)

    Burd, S C; du Toit, P J W; Uys, H

    2014-10-20

    We have demonstrated simultaneous laser frequency stabilization of a UV and IR laser, to coupled transitions of ions in the same spectroscopic sample, by detecting only the absorption of the UV laser. Separate signals for locking the different lasers are obtained by modulating each laser at a different frequency and using lock-in detection of a single photodiode signal. Experimentally, we simultaneously lock a 369 nm and a 935 nm laser to the (2)S(1/2) → (2)(P(1/2) and (2)D(3/2) → (3)D([3/2]1/2) transitions, respectively, of Yb(+) ions generated in a hollow cathode discharge lamp. Stabilized lasers at these frequencies are required for cooling and trapping Yb(+) ions, used in quantum information and in high precision metrology experiments. This technique should be readily applicable to other ion and neutral atom systems requiring multiple stabilized lasers.

  6. Exploiting sequential injection on-line solvent extraction/back extraction with detection by ETAAS and ICPMS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    . With detection by ETAAS, separation/preconcentration by solvent extraction has enjoyed much use. However, this approach is not necessarily the optimal one since introduction of organic eluates directly into the graphite tube might lead to deteriorated reproducibility and lower sensitivity. And for ICPMS......, organics are prohibitive because they give rise to an unstable plasma, and excessive carbon deposited on the sampling and skimmer cones might result in a gradual loss of sensitivity. All of these difficulties can be readily overcome by using solvent extraction/back extraction. Surprisingly, this approach...... presents an on-line SI-solvent extraction/back extraction procedure used in connection with detection by either ETAAS or ICPMS. Incorporating two newly designed dual-conical gravitational phase separators, its performance is demonstrated for the determination of various metals in reference materials....

  7. Exploiting Sequential Injection on-line Solvent Extraction/Back Extraction with Detection by ETAAS or ICPMS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    tolerances. With detection by ETAAS, separation/preconcentration by solvent extraction has enjoyed much use. However, this approach is not necessarily the optimal one since introduction of organic eluates directly into the graphite tube might lead to deteriorated reproducibility and lower sensitivity....... And for ICPMS, organics are prohibitive because they give rise to an unstable plasma, and excessive carbon deposited on the sampling and skimmer cones might result in a gradual loss of sensitivity. All of these difficulties can be readily overcome by using solvent extraction/back extraction. Surprisingly...... presents an on-line SI-solvent extraction/back extraction procedure used in connection with detection by either ETAAS or ICPMS. Incorporating two newly designed dual-conical gravitational phase separators, its performance is demonstrated for the determination of various metals in reference materials....

  8. Continuous Flow Liquid Microjunction Surface Sampling Probe Connected On-line with HPLC/MS for Spatially Resolved Analysis of Small Molecules and Proteins

    Energy Technology Data Exchange (ETDEWEB)

    Van Berkel, Gary J [ORNL; Kertesz, Vilmos [ORNL

    2013-01-01

    RATIONALE: A continuous flow liquid microjunction surface sampling probe extracts soluble material from surfaces for direct ionization and detection by MS. Demonstrated here is the on-line coupling of such a probe with HPLC/MS enabling extraction, separation and detection of small molecules and proteins from surfaces in a spatially resolved (~0.5 mm diameter spots) manner. Methods: A continuous flow liquid microjunction surface sampling probe was connected to a 6-port, 2-position valve for extract collection and injection to an HPLC column. A QTRAP 5500 hybrid triple quadrupole linear ion trap equipped with a Turbo V ion source operated in positive ESI mode was used for all experiments. System operation was tested with extraction, separation and detection of propranolol and associated metabolites from drug dosed tissues and proteins from dried sheep blood spots on paper. Results: Confirmed in the tissue were the parent drug and two different hydroxypropranolol glucuronides. The mass spectrometric response for these compounds from different locations in the liver showed an increase with increasing extraction time (5, 20 and 40 s extractions). For on-line separation and detection/identification of extracted proteins from dried sheep blood spots, two major protein peaks dominated the chromatogram and could be correlated with the expected masses for the hemoglobin and chains. Conclusions: Spatially resolved sampling, separation, and detection of small molecules and proteins from surfaces can be accomplished using a continuous flow liquid microjunction surface sampling probe coupled on-line with HPLC/MS detection.

  9. On-line solid phase extraction CZE for the simultaneous determination of lanthanum and gadolinium at picogram per liter levels.

    Science.gov (United States)

    Vizioli, Nora; Gil, Raúl; Martínez, Luis Dante; Silva, María Fernanda

    2009-08-01

    A non-specific on-line method is presented for the extraction and preconcentration of two rare earth elements using a microcartridge containing C(18)-derivatized silica particles prior to their analysis by CZE. The microcartridge, named analyte concentrator, was coupled on-line to the inlet of the separation capillary (fused-silica (FS) capillary, 75 microm id x12 cm from the inlet to the microcartidge and 37 cm from the microcartridge to the detector). The reversed-phase sorbent quantitatively retained gadolinium (Gd) and lanthanum (La) as 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complexes in the presence of non-ionic micelles of polyethylene glycol tert-octylphenyl ether, enabling sample clean-up and concentration enhancement with minimum sample handling. The rare earth elements chelates were released from the sorbent with methanol and then analyzed by CZE with diode array detection. A background electrolyte of 20 mM sodium tetraborate containing 8% ACN, pH 9.0, was found to be optimal for the separation of metal chelates. The concentration limits of detection were lowered to picogram per liter levels (20 pg/L for La and 80 pg/L for Gd). A 1000-fold improvement in concentration sensitivity for La- and Gd-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complexes with respect to CZE without preconcentration was reached.

  10. Iron protoporphyrin-modified monolithic support for on-line preconcentration of angiotensin prior to CE analysis.

    Science.gov (United States)

    Yone, Angel; Rusell, María Lucía; Grasselli, Mariano; Vizioli, Nora M

    2007-07-01

    An on-line preconcentration method using a polymeric monolithic support is proposed for the retention of the decapeptide angiotensin I and its subsequent analysis by CZE. Monolithic capillary columns were prepared in fused-silica (FS) capillaries of 150 microm id by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iron protoporphyrin IX (Fe-ProP). Monolithic microcolumns (8 mm long) were coupled on-line to the inlet of the separation capillary (FS capillary, 75 microm id x10 cm from the inlet to the microcolumn and 27 cm from the microcolumn to the detector). Angiotensin I was released from the sorbent by a 50 mM sodium phosphate, pH 2.5/ACN, 75:25 v/v solution and then analyzed by CZE with UV absorption detection at 214 nm. The concentration LOQ (CLOQ) was 0.5 ng/mL. The Fe-ProP-derivatized monolithic microcolumn coupled to the separation capillary exhibited a high retention capacity for peptide angiotensin I, and showed as much as 10,000-fold improvement in concentration sensitivity.

  11. Analysis of acrylamide in food products by microchip electrophoresis with on-line multiple-preconcentration techniques.

    Science.gov (United States)

    Wu, Minglei; Chen, Wujuan; Wang, Guan; He, Pingang; Wang, Qingjiang

    2016-10-15

    In this paper, a microchip electrophoresis method based on on-line multiple-preconcentration techniques combining field-amplified sample stacking and reversed-field stacking was developed for highly efficient analysis of acrylamide in food products. The related mechanism as well as important parameters governing separation and preconcentration have been investigated in order to obtain maximum resolution and sensitivity. The best separation was achieved using a 100mM borate solution at pH 9.3 as running buffer, and a sensitivity enhancement factor of 432 was obtained using this concentration method under optimal conditions. The detection limit of acrylamide was 1ng/mL, which was comparable to those previously obtained using CE methods with on-line preconcentration techniques and was 41-700 times lower than those previously reported CE methods without concentration process. The proposed method also gave satisfactory and reliable results in the analysis of acrylamide in potato chips and French fries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Rapid assessment of mycotoxins in wine by on-line SPE-UHPLC-FLD

    Directory of Open Access Journals (Sweden)

    Nistor Alina-Mihaela

    2017-01-01

    Full Text Available According to the latest statistics, grapes are one of the largest fruit crops worldwide. In this regard, it is important to consider all factors influencing quality of grapes and wine. In the last years, scientist focused on the study of mycotoxins that can influence the quality of wine. It is considered that toxins produced by moulds, causing significant economic losses, affect approximately one quarter of the world grape production. If the selective sorting of infected grapes is not done adequately, wine will present a major risk to consumers, mycotoxins being considered by the “International Agency for Cancer Research” a carcinogenic compound. The main mycotoxins monitored in this study come from Aspergillus sp., and are represented by aflatoxins B1, B2, G1, G2 and ochratoxin A. This study purpose is to develop a faster method for the analysis of mycotoxins, in order to increase rapidity and efficiency for the evaluation of the degree of infestation in wine. The purposed method is using an on-line large volume injection coupled to pre-concentration of sample (SPE which is directly transfer to the ultra-high-pressure liquid chromatography (UHPLC column for separation and the detection by means of the fluorescence detector (FLD. As the maximum tolerated level for mycotoxins in wines is 2 ppm, this method is able to detect under this limits of quantification with RSD below 2%.

  13. BOOK REVIEW: ON-LINE EDUCATION: AN EMANCIPATING VISION

    Directory of Open Access Journals (Sweden)

    Reviewed by Dr. Abdullah KUZU

    2006-04-01

    Full Text Available ON-LINE EDUCATION: AN EMANCIPATING VISION Written by Margarita Victoria Gomez Publisher: Cortez Editora ISBN 85-249-1062-3 São Paulo, Brazil, July 2004. Reviewed by Ricardo Romo TORRES Manuel Moreno Castaneda Maria del Sol Orozco Aguirre Universidad de Guadalajara Virtual MEXICO http://www.udgvirtual.udg.mx "On-line Education " is a book that meets the challenge to present itself as an unfinished text. In addition to demanding an active participation of the reader, it requires a predisposition to complete it through an also inconclusive dialogue. Among its goals we can find the search for education networks that remain under constant reconstruction, maintaining the emancipative vision as an imperative for the reconfiguration, as a constituted tissue for the scaffolding of subjects who impress,imagine, think and have a will. The unfinished part is presented in the following paragraph: "Similar to Babel according to Borges, knowledge is the product of a hazard in which fiction is the universe and where, out of fear of its multiple combinations, individual texts constitute an unfinished tale. In this labyrinth-shaped universe, the mirror and the recurrence do not allow finding the way out" page 134. The sense of being of man within a planetary community is framed by the ontological condition of conclusiveness; the requirement of being more, however, as well. This more is guided by the need for dialogue with others in terms of the opening and maintaining an unconcluded dialogue. The idea of a web or network leads to an articulating demand within the context of the category of wholeness. Based on this category, we will be able to present a reticulum of concepts where we can find included the web, subjectivity, identity, experience, mediation and, of course, digital literacy. This reticulum results in a concept of identified education with a condensed arrival point to something that the author defines as 'the pedagogy of virtuality'. The author is

  14. A Study on Features and Limitations of On-line C Compilers

    OpenAIRE

    Lakshminarayanan, Ramkumar; Dhanasekaran, Balaji; Ephre, Ben George

    2016-01-01

    Compilers are used to run programs that are written in a range of designs from text to executable formats. With the advent of the internet, studies related to the development of cloud based compilers are being carried out. There is a considerable increase of on-line compilers enabling on-line compilation of user programs without any mandate to. This study is specific to on-line C compilers to investigate the correctness, issues and limitations.

  15. Versatile Ion-polarized Techniques On-line (VITO) experiment at ISOLDE-CERN

    Science.gov (United States)

    Stachura, M.; Gottberg, A.; Johnston, K.; Bissell, M. L.; Garcia Ruiz, R. F.; Martins Correia, J.; Granadeiro Costa, A. R.; Dehn, M.; Deicher, M.; Fenta, A.; Hemmingsen, L.; Mølholt, T. E.; Munch, M.; Neyens, G.; Pallada, S.; Silva, M. R.; Zakoucky, D.

    2016-06-01

    The VITO (Versatile Ion-polarized Techniques Online) project is a new experimental setup at the ISOLDE facility at CERN. VITO is a dedicated beam line for producing laser-induced spin-polarized beams of both, atoms and ions, and it has been commissioned in response to the continuously growing demand for the use of spin-polarized beams. The new VITO beam line is a modification of the formerly existing ultra-high vacuum beam line, connecting ASPIC (Apparatus for Surface Physics and Interfaces at CERN), and it has been under construction since the beginning of 2014. Once fully commissioned, VITO will open up numerous possibilities for carrying out multidisciplinary experiments in the areas of nuclear and solid state physics, fundamental interaction physics and biophysics. In its final stage the VITO beam line will provide three fully independent experimental stations: UHV chamber for material science applications, a β-asymmetry station where highly-polarized ions will be available, and a central open-end station suitable for travelling experiments. The VITO beam line will operate in two different modes providing either beams of spin-polarized atoms or ions, or non-polarized ion beams to all three end stations operating from 10-10 mbar to 50 mbar. Recent experimental campaigns with stable and radioactive beams have allowed for testing VITO's constituent parts and have demonstrated 96% of ion beam transmission to the collection chamber installed on the central station. The first experimental results obtained with on-line Perturbed Angular Correlation (PAC) spectroscopy using 68mCu ion-beams will be briefly discussed.

  16. On-Line Booking Policies and Competitive Analysis of Medical Examination in Hospital

    Directory of Open Access Journals (Sweden)

    Li Luo

    2014-01-01

    Full Text Available From the on-line point, we consider the hospital’s medical examination appointment problem with hierarchical machines. This approach eliminates the need for both demand forecasts and a risk-neutrality assumption. Due to different unit revenue, uncertain demand, and arrival of patients, we design on-line booking policies for two kinds of different situations from the perspective of on-line policy and competitive analysis. After that, we prove the optimal competitive ratios. Through numerical examples, we compare advantages and disadvantages between on-line policies and traditional policies, finding that there is different superiority for these two policies under different arrival sequences.

  17. On-line computation and maximum-weighted hereditary subgraph problems

    Directory of Open Access Journals (Sweden)

    Demange Marc

    2011-01-01

    Full Text Available In this paper1 we study the on-line version of maximum-weighted hereditary subgraph problems. In our on-line model, the final instance (a graph with n vertices is revealed in t clusters, 2 ≤ t ≤ n . We first focus on an on-line version of the maximumweighted hereditary subgraph problem. Then, we deal with the particular case of the independent set problem. We are interested in two types of results: the competitive ratio guaranteed by the on-line algorithm and hardness results that account for the difficulty of the problems and for the quality of algorithms developed to solve them.

  18. Tunable on chip optofluidic laser

    DEFF Research Database (Denmark)

    Bakal, Avraham; Vannahme, Christoph; Kristensen, Anders

    2016-01-01

    On chip tunable laser is demonstrated by realizing a microfluidic droplet array. The periodicity is controlled by the pressure applied to two separate inlets, allowing to tune the lasing frequency over a broad spectral range.......On chip tunable laser is demonstrated by realizing a microfluidic droplet array. The periodicity is controlled by the pressure applied to two separate inlets, allowing to tune the lasing frequency over a broad spectral range....

  19. Laser Control of Atoms and Molecules

    CERN Document Server

    Letkhov, V S

    2007-01-01

    This text treats laser light as a universal tool to control matter at the atomic and molecular level, one of the most exciting applications of lasers. Lasers can heat matter, cool atoms to ultra-low temperatures where they show quantum collective behaviour, and can act selectively on specific atoms and molecules for their detection and separation.

  20. On-line identification of lysergic acid diethylamide (LSD) in tablets using a combination of a sweeping technique and micellar electrokinetic chromatography/77 K fluorescence spectroscopy.

    Science.gov (United States)

    Fang, Ching; Liu, Ju-Tsung; Lin, Cheng-Huang

    2003-03-01

    This work describes a novel method for the accurate determination of lysergic acid diethylamide (LSD) in tablets. A technique involving sweeping-micellar electrokinetic chromatography (MEKC) was used for the initial on-line concentration and separation, after which a cryogenic molecular fluorescence experiment was performed at 77 K. Using this approach, not only the separation of LSD from the tablet extract was achieved, but on-line spectra were readily distinguishable and could be unambiguously assigned. The results are in agreement with analyses by gas chromatography-mass spectrometry (GC-MS). Thus, this method, which was found to be accurate, sensitive and rapid, has the potential for use as a reliable complementary method to GC-MS in such analyses.

  1. Lasers technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The Lasers Technology Program of IPEN is committed to the development of new lasers based on the research of optical materials and new technologies, as well to laser applications in several areas: Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. The Program is basically divided into two main areas: Material and Laser Development and Laser Applications.

  2. Fictional Separation Logic

    DEFF Research Database (Denmark)

    Jensen, Jonas Buhrkal; Birkedal, Lars

    2012-01-01

    , separation means physical separation. In this paper, we introduce \\emph{fictional separation logic}, which includes more general forms of fictional separating conjunctions P * Q, where "*" does not require physical separation, but may also be used in situations where the memory resources described by P and Q...... overlap. We demonstrate, via a range of examples, how fictional separation logic can be used to reason locally and modularly about mutable abstract data types, possibly implemented using sophisticated sharing. Fictional separation logic is defined on top of standard separation logic, and both the meta...

  3. Separating biological cells

    Science.gov (United States)

    Brooks, D. E.

    1979-01-01

    Technique utilizing electric field to promote biological cell separation from suspending medium in zero gravity increases speed, reduces sedimentation, and improves efficiency of separation in normal gravity.

  4. Lasers and new trends in laser-tissue interaction

    Science.gov (United States)

    Serafetinides, Alexandros A.; Papadopoulos, Dimitris N.

    2004-06-01

    Mid-IR lasers are already used successfully in numerous surgical operations. The Er:YAG and the HF laser, are the main laser sources emitting in the 3.0 μm range of the spectrum, and as this wavelength coincides with the peak of the water and other main soft and hard tissue components absorption curves, it is clear that these lasers would be very useful in numerous medical fields as dentistry, dermatology, angioplasty, ophthalmology etc. Recently, the development of flexible, low loss, able to deliver high power and safe to enter the human body waveguides and fibers for pulsed mid-infrared laser radiation initiated the efforts of the extension of laser surgery in the area of the minimally invasive endoscopy. The laser-induced fluorescence (LIF) is proposed for diagnosis in several pathologies, as in arterial atherosclerosis, in malignancy or for early dental caries detection. LIF is also investigated as a suitable method for monitoring the on line laser surgery interventions.

  5. Thermal analysis of line-defect photonic crystal lasers

    DEFF Research Database (Denmark)

    Xue, Weiqi; Ottaviano, Luisa; Chen, Yaohui

    2015-01-01

    We report a systematic study of thermal effects in photonic crystal membrane lasers based on line-defect cavities. Two material platforms, InGaAsP and InP, are investigated experimentally and numerically. Lasers with quantum dot layers embedded in an InP membrane exhibit lasing at room temperature...

  6. Laser applications in surgery.

    Science.gov (United States)

    Azadgoli, Beina; Baker, Regina Y

    2016-12-01

    In modern medicine, lasers are increasingly utilized for treatment of a variety of pathologies as interest in less invasive treatment modalities intensifies. The physics behind lasers allows the same basic principles to be applied to a multitude of tissue types using slight modifications of the system. Multiple laser systems have been studied within each field of medicine. The term "laser" was combined with "surgery," "ablation," "lithotripsy," "cancer treatment," "tumor ablation," "dermatology," "skin rejuvenation," "lipolysis," "cardiology," "atrial fibrillation (AF)," and "epilepsy" during separate searches in the PubMed database. Original articles that studied the application of laser energy for these conditions were reviewed and included. A review of laser therapy is presented. Laser energy can be safely and effectively used for lithotripsy, for the treatment of various types of cancer, for a multitude of cosmetic and reconstructive procedures, and for the ablation of abnormal conductive pathways. For each of these conditions, management with lasers is comparable to, and potentially superior to, management with more traditional methods.

  7. Coherent Polariton Laser

    Science.gov (United States)

    Kim, Seonghoon; Zhang, Bo; Wang, Zhaorong; Fischer, Julian; Brodbeck, Sebastian; Kamp, Martin; Schneider, Christian; Höfling, Sven; Deng, Hui

    2016-01-01

    The semiconductor polariton laser promises a new source of coherent light, which, compared to conventional semiconductor photon lasers, has input-energy threshold orders of magnitude lower. However, intensity stability, a defining feature of a coherent state, has remained poor. Intensity noise many times the shot noise of a coherent state has persisted, attributed to multiple mechanisms that are difficult to separate in conventional polariton systems. The large intensity noise, in turn, limits the phase coherence. Thus, the capability of the polariton laser as a source of coherence light is limited. Here, we demonstrate a polariton laser with shot-noise-limited intensity stability, as expected from a fully coherent state. This stability is achieved by using an optical cavity with high mode selectivity to enforce single-mode lasing, suppress condensate depletion, and establish gain saturation. Moreover, the absence of spurious intensity fluctuations enables the measurement of a transition from exponential to Gaussian decay of the phase coherence of the polariton laser. It suggests large self-interaction energies in the polariton condensate, exceeding the laser bandwidth. Such strong interactions are unique to matter-wave lasers and important for nonlinear polariton devices. The results will guide future development of polariton lasers and nonlinear polariton devices.

  8. Coherent Polariton Laser

    Directory of Open Access Journals (Sweden)

    Seonghoon Kim

    2016-03-01

    Full Text Available The semiconductor polariton laser promises a new source of coherent light, which, compared to conventional semiconductor photon lasers, has input-energy threshold orders of magnitude lower. However, intensity stability, a defining feature of a coherent state, has remained poor. Intensity noise many times the shot noise of a coherent state has persisted, attributed to multiple mechanisms that are difficult to separate in conventional polariton systems. The large intensity noise, in turn, limits the phase coherence. Thus, the capability of the polariton laser as a source of coherence light is limited. Here, we demonstrate a polariton laser with shot-noise-limited intensity stability, as expected from a fully coherent state. This stability is achieved by using an optical cavity with high mode selectivity to enforce single-mode lasing, suppress condensate depletion, and establish gain saturation. Moreover, the absence of spurious intensity fluctuations enables the measurement of a transition from exponential to Gaussian decay of the phase coherence of the polariton laser. It suggests large self-interaction energies in the polariton condensate, exceeding the laser bandwidth. Such strong interactions are unique to matter-wave lasers and important for nonlinear polariton devices. The results will guide future development of polariton lasers and nonlinear polariton devices.

  9. Solid state laser

    Science.gov (United States)

    Rines, Glen A. (Inventor); Moulton, Peter F. (Inventor); Harrison, James (Inventor)

    1993-01-01

    A wavelength-tunable, injection-seeded, dispersion-compensated, dispersively-pumped solid state laser includes a lasing medium; a highly reflective mirror; an output coupler; at least one isosceles Brewster prism oriented to the minimum deviation angle between the medium and the mirror for directing light of different wavelengths along different paths; means for varying the angle of the highly reflective mirror relative to the light from at least one Brewster angle for selecting a predetermined laser operating wavelength; a dispersion compensation apparatus associated with the lasing medium; a laser injection seeding port disposed between the dispersion compensation apparatus and one of the mirror and coupler and including a reflective surface at an acute non-Brewster angle to the laser beam for introducing a seed input; a dispersion compensation apparatus associated with the laser medium including opposite chirality optical elements; the lasing medium including a pump surface disposed at an acute angle to the laser beam to define a discrete path for the pumping laser beam separate from the pumped laser beam.

  10. On-line monitoring and control of animal-cell cultures

    NARCIS (Netherlands)

    Pol, van der J.J.

    1996-01-01


    On-line analysis and control of biotechnological processes is still the stepchild in industry. In general, only parameters as dissolved-oxygen concentration, pH and temperature are controlled on-line. Important parameters as substrate and inhibitor concentrations are only measured

  11. The Impact of Cognitive Style on Social Networks in On-Line Discussions

    Science.gov (United States)

    Jablokow, Kathryn; Vercellone-Smith, Pamela

    2011-01-01

    With the rise of e-Learning in engineering education, understanding the impact of individual differences on the ways students communicate and collaborate on-line has become increasingly important. The research described here investigates the influence of cognitive style on the interactions within student social networks in an on-line learning…

  12. Enhancing On-Line Teaching with Verbal Immediacy through Self-Determination Theory

    Science.gov (United States)

    Furlich, Stephen A.

    2013-01-01

    This paper explores the use of instructor verbal immediacy behaviors for on-line classes. Specifically, it demonstrates how instructor verbal immediacy behaviors found in face-to-face classes can also be displayed for on-line classes. It is argued that self-determination theory describes identification of the student as an important role in the…

  13. Challenges and opportunities in ‘last mile’ logistics for on-line food retail

    NARCIS (Netherlands)

    Trienekens, Jacques; Hvolby, Hans Henrik; Turner, Paul

    2017-01-01

    Conventional approaches to logistics for food retail continue to be challenged by the rapid growth of on-line food retail. At the same time, ‘last mile’ logistics optimization for on-line retail also face challenges as changing consumer expectations, habits and purchasing patterns intersect with

  14. Students Reflecting on Test Performance and Feedback: An On-Line Approach

    Science.gov (United States)

    Fyfe, Georgina; Fyfe, Sue; Meyer, Jan; Ziman, Mel; Sanders, Kathy; Hill, Julie

    2014-01-01

    Undergraduate students accessing on-line tests in Human Biology in three Western Australian universities were asked to complete an on-line post-test reflective survey about their perceptions of their test performance in light of automated feedback. The survey allowed pre-determined choices and comment text boxes relating to students' perceptions…

  15. A New Method of On-line Grid Impedance Estimation for PV Inverter

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Asiminoaei, Lucian; Blaabjerg, Frede

    2004-01-01

    for on-line measuring the grid impedance is presented. The presented method requires no extra hardware being accommodated by typical PV inverters, sensors and CPU, to provide a fast and low cost approach of on-line impedance measurement. By injecting a non-characteristic harmonic current and measuring...

  16. 7 CFR 42.140 - Operating Characteristic (OC) curves for on-line sampling and inspection.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Operating Characteristic (OC) curves for on-line... Miscellaneous § 42.140 Operating Characteristic (OC) curves for on-line sampling and inspection. (a) This section contains the Operating Characteristic (OC) curve for each of the sampling plans given in Tables I...

  17. Semi-on-line analysis for fast and precise monitoring of bioreaction processes

    DEFF Research Database (Denmark)

    Christensen, L.H.; Marcher, J.; Schulze, Ulrik

    1996-01-01

    Monitoring of substrates and products during fermentation processes can be achieved either by on-line, in situ sensors or by semi-on-line analysis consisting of an automatic sampling step followed by an ex situ analysis of the retrieved sample. The potential risk of introducing time delays...

  18. Sampling and analytical strategies in on-line bioproces monitoring and control.

    NARCIS (Netherlands)

    van de Merbel, N.C.; Lingeman, H.; Brinkman, U.A.T.

    1996-01-01

    The use of on-line systems for the determination of small organic molecules during biotechnological processes is reviewed. Since sampling of part of the culture medium is an inherent and crucial part of the use of on-line systems, several sampling systems are described and compared and a

  19. International On-Line Reciprocal Peer Tutoring to Promote Modern Language Development in Primary Schools

    Science.gov (United States)

    Thurston, Allen; Duran, David; Cunningham, Erika; Blanch, Silvia; Topping, Keith

    2009-01-01

    The paper reports data from an on-line peer tutoring project. In the project 78, 9-12-year-old students from Scotland and Catalonia peer tutored each other in English and Spanish via a managed on-line environment. Significant gains in first language (Catalonian pupils) modern language (Scottish pupils) and attitudes towards modern languages (both…

  20. Spectroscopic monitoring of batch reactions for on-line fault detection and diagnosis

    NARCIS (Netherlands)

    Westerhuis, J. A.; Gurden, S. P.; Smilde, A. K.

    2000-01-01

    This paper presents the general methodology to use spectroscopic measurements directly for on-line process monitoring and detection and diagnosis of disturbances. An application of the on-line monitoring of a chemical batch reaction using UV-visible spectroscopy is discussed in detail. Successful

  1. 76 FR 7102 - Simplified Network Application Processing System, On-line Registration and Account Maintenance

    Science.gov (United States)

    2011-02-09

    ... System, On-line Registration and Account Maintenance AGENCY: Bureau of Industry and Security, Commerce... Regulations to implement a mandatory on-line registration process for obtaining an account to submit license... have with respect to keeping information in their accounts current. This rulemaking is consistent with...

  2. Controlling Separation in Turbomachines

    Science.gov (United States)

    Evans, Simon; Himmel, Christoph; Power, Bronwyn; Wakelam, Christian; Xu, Liping; Hynes, Tom; Hodson, Howard

    2010-01-01

    Four examples of flow control: 1) Passive control of LP turbine blades (Laminar separation control). 2) Aspiration of a conventional axial compressor blade (Turbulent separation control). 3) Compressor blade designed for aspiration (Turbulent separation control). 4.Control of intakes in crosswinds (Turbulent separation control).

  3. Status of the future SPIRAL2 resonance ionization laser ion source GISELE

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Fabian; Kron, Tobias; Wendt, Klaus [Institut fuer Physik, Universitaet Mainz (Germany); Henares, Jose Luis; Lecesne, Nathalie; Leroy, Renan; Osmond, Benoit; Sjoedin, Marica [GANIL, Caen (France)

    2014-07-01

    Resonance Ionization Spectroscopy is a most powerful tool for efficient and selective production of ion beams in particular useful at on-line isotope breeders. For this purpose the future upgrade S{sup 3} (Super Separator Spectrometer) of the SPIRAL2 accelerator at GANIL (Caen, France) includes a gas cell at its fission target. Therein high resolution RIS on short lived isotopes will be performed, addressing either the in-cell or in-jet technology. The corresponding Resonance Ionization Laser Ion Source project GISELE is furthermore designed to produce strong and pure radioisotope beams for experiments at the future hot cavity unit of SPIRAL2. Its laser system will combine sets of tunable high-repetition rate pulsed dye as well as titanium:sapphire lasers. Currently, off-line preparation studies are performed with the titanium:sapphire lasers for the day 1 requested beams of Zinc and Tin. A suitable excitation scheme was developed for Zinc and the ionization efficiency was determined. For Tin three known ionization schemes, a 3-step and two widely identical 2-step schemes, were tested and compared with published results from other facilities.

  4. FEDIX on-line information service: Design, develop, test, and implement an on-line research and education information service. Annual status report, September 1992--August 1993

    Energy Technology Data Exchange (ETDEWEB)

    Rodman, J.A.

    1993-08-01

    Federal Information Exchange, Inc. (FIE) is a diversified information services company that is recognized as the major electronic link between the higher education community and the Federal government in the field of research administration. FIE provides a range of information related services to the government, academic and private sectors, including database management, software development and technical support. FEDIX is the on-line information service designed, developed and implemented by FIE to accomplish the following objectives: (1). Broaden the participation of the education community in Federal research and education programs by providing free and unrestricted on-line access to information from all participating Federal agencies; and (2). Provide the education community with on-line access to a single keyword-searchable system for research and educational funding opportunities at the participating Federal agencies.

  5. Development of on-line liquid chromatography-biochemical detection for soluble epoxide hydrolase inhibitors in mixtures.

    NARCIS (Netherlands)

    Falck, D.; Schebb, N.H.; Prinatiningtyas, S; Zhang, Jiawen; Heus, F.A.H.; Morisseau, C; Kool, J.; Hammock, B.D.; Niessen, W.M.A.

    2013-01-01

    In this study, an end-point-based fluorescence assay for soluble epoxide hydrolase (sEH) was transformed into an on-line continuous-flow format. The on-line biochemical detection system (BCD) was coupled on-line to liquid chromatography (LC) to allow mixture analysis. The on-line BCD was based on a

  6. Laser principles.

    Science.gov (United States)

    Bogdan Allemann, Inja; Kaufman, Joely

    2011-01-01

    Since the construction of the first laser in the 1960s, the role that lasers play in various medical specialities, including dermatology, has steadily increased. However, within the last 2 decades, the technological advances and the use of lasers in the field of dermatology have virtually exploded. Many treatments have only become possible with the use of lasers. Especially in aesthetic medicine, lasers are an essential tool in the treatment armamentarium. Due to better research and understanding of the physics of light and skin, there is now a wide and increasing array of different lasers and devices to choose from. The proper laser selection for each indication and treatment requires a profound understanding of laser physics and the basic laser principles. Understanding these principles will allow the laser operator to obtain better results and help avoid complications. This chapter will give an in-depth overview of the physical principles relevant in cutaneous laser surgery. Copyright © 2011 S. Karger AG, Basel.

  7. El aprendizaje on-line: oportunidades y retos en instituciones politécnicas Apprenticeship Students Learning On-line: Opportunities and Challenges for Polytechnic Institutions

    Directory of Open Access Journals (Sweden)

    Martha Burkle

    2011-10-01

    Full Text Available Este artículo presenta los retos y las oportunidades actuales respecto a la distribución de contenidos virtuales y online en el marco de la institución de educación superior politécnica. Debido a la recesión económica actual, se está produciendo un retorno de estudiantes aprendices al mundo académico con el fin de actualizar habilidades y conocimientos. Sin embargo, a menudo los estudiantes con este perfil no están dispuestos a dejar de lado el trabajo o su vida personal para volver al estudio. En este contexto, el aprendizaje on-line representa una magnífica oportunidad para acceder a contenidos académicos sin tener que dejar de lado el trabajo. No obstante, para garantizar el éxito en la provisión de materiales on-line para estudiantes aprendices, las instituciones politécnicas de todo el mundo deben enfrentar dos retos: la transformación de contenidos de aprendizaje práctico en objetos educativos en línea, y la creación de ambientes educativos en los que los estudiantes se sientan involucrados y participativos. Más aún, en un ambiente de aprendizaje en el que el uso de tecnologías Web 2.0 es primordial, es importante considerar también el nuevo rol del profesor, que se ha convertido en facilitador del aprendizaje. Con el fin de analizar la experiencia educativa on-line de estos estudiantes, se distribuyeron 57 encuestas entre los estudiantes registrados en programas de formación on-line. El artículo presenta las conclusiones de la investigación y las compara con las aportaciones que se han hecho en lo relativo a la nueva generación de estudiantes y su uso de las tecnologías, así como el comportamiento registrado por la muestra de la investigación (preferencias y estilos de aprendizaje, su uso de las nuevas tecnologías. Se plantean igualmente oportunidades innovadoras para conectar aprendizaje y contexto laboral y recomendaciones para futuras investigaciones.This paper presents the ongoing research on the

  8. Comparing On-Line to In-Person Course Delivery: An Empirical Study

    Directory of Open Access Journals (Sweden)

    Jammie Price

    2007-05-01

    Full Text Available Web-based technologies have been used in the classroom for over 15 years, including websites, email, listserves, library reserves, and text books. Among these options, social scientists range widely in their web usage – from simply posting syllabi on-line to delivering a course fully on-line in asynchronous learning networks. Use of web-based technology for instructional purposes is increasing, as is enrollment in distance education courses and on-line course offerings. Many administrators and faculty promote on-line instruction as the solution to managing increased college enrollments, particularly among non-traditional students. However, are the academic outcomes of on-line instruction similar to traditional in-person instruction? Few empirical studies have been done. This is unfortunate. The results of an experiment to evaluate the relative effectiveness of on-line verses an in-person course on sociological research are presented. Unfortunately the on-line participants did much worse than the in-person course.

  9. Development of on-line spectroscopic determination approach of dispersive liquid-liquid microextraction based on an effective device.

    Science.gov (United States)

    Li, Wei; Zhang, Xuan; Tong, Peijin; Wu, Ting; Hu, Huilian; Wang, Meng; Du, Yiping

    2014-04-24

    A novel, rapid, simple, and low-cost on-line determination approach of dispersive liquid-liquid microextraction (DLLME) with low-density solvents was developed with the support of a specially designed effective homemade device. The proposed method surmounted the drawbacks of conventional DLLME of the need of high-density solvents as extractants, and the requirement of centrifugation operation to obtain phase separation, and the difficulties to realize on-line determination. The amount of sample utilized can conveniently change according to practical needs by varying the volume of the extraction tube of the device to perform a more effective DLLME. A case study was carried out to assess this method utilizing the dye rhodamine B as the model analyte. The experiment parameters influencing the extraction were systematically investigated. Under optimum conditions, the linearity was obtained in the range of 0.015-1.000 μg/mL with the correlation coefficient (r(2)) of 0.9980. The limit of detection and quantification were 6.1 and 20.4 μg/L, respectively. Good repeatability was achieved with the relative standard deviations (RSD) for five replicate measurements of different concentration samples less than 4.06%, and the presented method was successfully employed to quantify rhodamine B in three real samples. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Lessons Learned by Comparing On-line Education Strategies Across Disciplines

    Directory of Open Access Journals (Sweden)

    Stephen H. Edwards

    2004-12-01

    Full Text Available When choosing how best to employ educational technologies for on-line learning, there is much to be gained by examining the experience of educators in other disciplines. This paper presents four brief case studies in the disciplines of computer science and social work. Lessons learned by comparing these diverse experiences are discussed, including creating a community of learners, supporting asynchronous student communication, using synchronous on-line meetings, and providing social support. In addition, the experiences presented indicate that stereotypes of student capabilities and expectations may often be inaccurate, and revising one's views may be helpful in achieving better results in on-line education.

  11. On-line topographic measurements of lubricated metallic sliding surfaces. A case study of lubricated buried interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Korres, Spyridon

    2013-09-01

    Recent advances in in-situ testing make it possible to investigate dynamic processes on sliding surfaces. In this book, modern methods are utilized in a novel custom-built tribometer to examine topography changes on sliding lubricated metallic surfaces. These techniques include a high resolution magnetic planar positioning, digital holographic and atomic force microscopy, as well as radionuclide on-line wear measurement. Experiments were performed to examine dynamic changes on copper surfaces, when experiencing tribological load from a sliding flat steel pin. The results suggest that mechanical mixing and material transfer lead to an unstable lamellar formation near the surface. Still, delamination cannot be excluded as a contributing mechanism. Further experiments were performed with ruby spheres sliding against flat Cu samples. Using the widening rate of the plowing tracks, an approximation technique is proposed to precisely separate plowing from shear terms of the friction force.

  12. Trypsin immobilization on an ethylenediamine-based monolithic minidisk for rapid on-line peptide mass fingerprinting studies.

    Science.gov (United States)

    Nicoli, R; Rudaz, S; Stella, C; Veuthey, J-L

    2009-03-27

    The aim of this work was to develop a trypsin-based micro-immobilized enzyme reactor prepared on a monolithic ethylenediamine BIA Separations CIM (convective interaction media) minidisk. The micro-immobilized enzyme reactor (IMER) was integrated in a liquid chromatography system hyphenated to electrospray ionization tandem mass spectrometry to carry out on-line protein digestion and identification. The performance of this IMER was compared with that obtained using a previously developed bioreactor prepared on a conventional CIM ethylenediamine disk and with that of the commercially available Poroszyme immobilized trypsin cartridge. In this work, we showed how different proteins were identified with good recoveries using a digestion time of 10 min only.

  13. Laser processing and analysis of materials

    CERN Document Server

    Duley, W W

    1983-01-01

    It has often been said that the laser is a solution searching for a problem. The rapid development of laser technology over the past dozen years has led to the availability of reliable, industrially rated laser sources with a wide variety of output characteristics. This, in turn, has resulted in new laser applications as the laser becomes a familiar processing and analytical tool. The field of materials science, in particular, has become a fertile one for new laser applications. Laser annealing, alloying, cladding, and heat treating were all but unknown 10 years ago. Today, each is a separate, dynamic field of research activity with many of the early laboratory experiments resulting in the development of new industrial processing techniques using laser technology. Ten years ago, chemical processing was in its infancy awaiting, primarily, the development of reliable tunable laser sources. Now, with tunability over the entire spectrum from the vacuum ultraviolet to the far infrared, photo­ chemistry is undergo...

  14. Magnetic separation of algae

    Science.gov (United States)

    Nath, Pulak; Twary, Scott N.

    2016-04-26

    Described herein are methods and systems for harvesting, collecting, separating and/or dewatering algae using iron based salts combined with a magnetic field gradient to separate algae from an aqueous solution.

  15. Separation anxiety in children

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/001542.htm Separation anxiety in children To use the sharing features on this page, please enable JavaScript. Separation anxiety in children is a developmental stage in which ...

  16. Separators for electrochemical cells

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, Steven Allen; Anakor, Ifenna Kingsley; Farrell, Greg Robert

    2018-01-16

    Provided are separators for use in an electrochemical cell comprising (a) an inorganic oxide and (b) an organic polymer, wherein the inorganic oxide comprises organic substituents. Also provided are electrochemical cells comprising such separators.

  17. GSA On-Line Procurement Programs Lack Documentation and Reliability Testing

    National Research Council Canada - National Science Library

    Perry, Stephen

    2001-01-01

    .... For example, as part of an effort to improve the functioning of the government and achieve efficiencies of operations, the President has requested agencies to expand their use of on-line procurement in fiscal year 2OO2...

  18. Analisis de la adaptacion a la red en las editoriales on line de cinco paises europeos

    National Research Council Canada - National Science Library

    Garcia Orosa, B; Lopez Garcia, X; Gallur Santorum, S

    2013-01-01

    [ES] Introduccion. El articulo analiza los editoriales de periodicos on line de cinco paises europeos con el objetivo principal de realizar una radiografia de sus caracteristicas y su grado de adaptacion a la red. Metodologia...

  19. On-line chemical composition analyzer development. Status report, February 1, 1993--April 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Garrison, A.A.

    1993-06-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  20. Integration of On-Line and Off-Line Diagnostic Algorithms for Aircraft Engine Health Management

    Science.gov (United States)

    Kobayashi, Takahisa; Simon, Donald L.

    2007-01-01

    This paper investigates the integration of on-line and off-line diagnostic algorithms for aircraft gas turbine engines. The on-line diagnostic algorithm is designed for in-flight fault detection. It continuously monitors engine outputs for anomalous signatures induced by faults. The off-line diagnostic algorithm is designed to track engine health degradation over the lifetime of an engine. It estimates engine health degradation periodically over the course of the engine s life. The estimate generated by the off-line algorithm is used to update the on-line algorithm. Through this integration, the on-line algorithm becomes aware of engine health degradation, and its effectiveness to detect faults can be maintained while the engine continues to degrade. The benefit of this integration is investigated in a simulation environment using a nonlinear engine model.

  1. Development of an on-line state estimator for fed-batch filamentous fungal fermentations

    DEFF Research Database (Denmark)

    Mears, Lisa; Stocks, Stuart M.; Albæk, Mads O.

    to monitor and control bioprocess systems. There is therefore an interest in state estimation, in order to model these key process states based on available on-line measurements [1]. This work discusses the application of a first principle model to pilot scale filamentous fungal fermentation systems operated...... at Novozymes A/S. The model comprises of an online parameter estimation block, coupled to a physical model of the system. The parameter estimation block utilizes on-line off gas measurements and ammonia addition in order to model changing reaction rates in the system. Based on a global process stoichiometry...... pressure [4], [5]. This stoichiometric-based coupled process model is successfully applied on-line as a state estimator in order to predict the biomass and product concentration, from robust, available on-line measurements. Such state estimators will be valuable as part of control strategy development...

  2. First on-line $\\beta$-NMR on oriented nuclei magnetic dipole moments of the $\

    CERN Document Server

    Giles, T; Stone, N J; Van Esbroeck, K; White, G; Wöhr, A; Veskovic, M; Towner, I S; Mantica, P F; Prisciandaro, J I; Morrissey, D J; Fedosseev, V; Mishin, V I; Köster, U; Walters, W B

    2000-01-01

    The first fully on-line use of the angular distribution of $\\beta$ - emission in detection of NMR of nuclei oriented at low temperatures is reported. The magnetic moments of the single valence particle, intermediate mass, isotopes $^{67}$Ni($\

  3. CODE STEM - Moon, Mars, and Beyond; DLESE-Powered On-Line Classroom Project

    Data.gov (United States)

    National Aeronautics and Space Administration — "CODE (COrps DEvelopment) STEM (Science, Technology, Engineering, and Math) ? Moon Mars and Beyond; DLESE-Powered On-Line Classroom" shares the excitement of...

  4. Meniscus Membranes For Separation

    Science.gov (United States)

    Dye, Robert C.; Jorgensen, Betty; Pesiri, David R.

    2005-09-20

    Gas separation membranes, especially meniscus-shaped membranes for gas separations are disclosed together with the use of such meniscus-shaped membranes for applications such as thermal gas valves, pre-concentration of a gas stream, and selective pre-screening of a gas stream. In addition, a rapid screening system for simultaneously screening polymer materials for effectiveness in gas separation is provided.

  5. Preferred Methods of Learning for Nursing Students in an On-Line Degree Program.

    Science.gov (United States)

    Hampton, Debra; Pearce, Patricia F; Moser, Debra K

    Investigators have demonstrated that on-line courses result in effective learning outcomes, but limited information has been published related to preferred teaching strategies. Delivery of on-line courses requires various teaching methods to facilitate interaction between students, content, and technology. The purposes of this study were to understand student teaching/learning preferences in on-line courses to include (a) differences in preferred teaching/learning methods for on-line nursing students across generations and (b) which teaching strategies students found to be most engaging and effective. Participants were recruited from 2 accredited, private school nursing programs (N=944) that admit students from across the United States and deliver courses on-line. Participants provided implied consent, and 217 (23%) students completed the on-line survey. Thirty-two percent of the students were from the Baby Boomer generation (1946-1964), 48% from Generation X (1965-1980), and 20% from the Millennial Generation (born after 1980). The preferred teaching/learning methods for students were videos or narrated PowerPoint presentations, followed by synchronous Adobe Connect educations sessions, assigned journal article reading, and e-mail dialog with the instructor. The top 2 methods identified by participants as the most energizing/engaging and most effective for learning were videos or narrated PowerPoint presentations and case studies. The teaching/learning method least preferred by participants and that was the least energizing/engaging was group collaborative projects with other students; the method that was the least effective for learning was wikis. Baby Boomers and Generation X participants had a significantly greater preference for discussion board (Plearning (Plearning methods for on-line students. Faculty need to incorporate various teaching methodologies within on-line courses to include both synchronous and asynchronous activities and interactive and passive

  6. On line high dose static position monitoring by ionization chamber detector for industrial gamma irradiators

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Ary A. [Universidade Estadual de Londrina-Depto de Fisica, Rodovia Celso Garcia Cid, km 38, 086051-990 Londrina (Brazil); Vieira, Jose M. [Instituto de Pesquisas Energeticas e Nucleares-IPEN/CNEN-SP, Prof. Lineu Prestes, 2242-Cidade Universitaria, 05508-900 Sao Paulo (Brazil); Hamada, Margarida M. [Instituto de Pesquisas Energeticas e Nucleares-IPEN/CNEN-SP, Prof. Lineu Prestes, 2242-Cidade Universitaria, 05508-900 Sao Paulo (Brazil)], E-mail: mmhamada@ipen.br

    2010-04-15

    A 1 cm{sup 3} cylindrical ionization chamber was developed to measure high doses on line during the sample irradiation in static position, in a {sup 60}Co industrial plant. The developed ionization chamber showed to be suitable for use as a dosimeter on line. A good linearity of the detector was found between the dose and the accumulated charge, independently of the different dose rates caused by absorbing materials.

  7. A novel, optical, on-line bacteria sensor for monitoring drinking water quality

    OpenAIRE

    Bo Højris; Sarah Christine Boesgaard Christensen; Hans-Jørgen Albrechtsen; Christian Smith; Mathis Dahlqvist

    2016-01-01

    Today, microbial drinking water quality is monitored through either time-consuming laboratory methods or indirect on-line measurements. Results are thus either delayed or insufficient to support proactive action. A novel, optical, on-line bacteria sensor with a 10-minute time resolution has been developed. The sensor is based on 3D image recognition, and the obtained pictures are analyzed with algorithms considering 59 quantified image parameters. The sensor counts individual suspended partic...

  8. On-line biomass estimation using a modified oxygen utilization rate

    Energy Technology Data Exchange (ETDEWEB)

    Petkov, S.B. [Minnesota Univ., Duluth, MN (United States). Dept. of Chemical Engineering; Davis, R.A. [Minnesota Univ., Duluth, MN (United States). Dept. of Chemical Engineering

    1996-06-01

    A procedure for estimating biomass during batch fermentation from on-line gas analysis is presented. First, the respiratory quotient was used to determine the fraction of the total oxygen utiliation rate required for cell maintenance and growth versus product synthesis. The modified oxygen utilization rate was then used to estimate biomass on-line by integrating the oxygen balance for cell synthesis-maintenance. The method is illustrated for the case of L-lysine synthesis by Corynebacterium glutamicum. (orig.)

  9. Micro-simulation Modeling Approach to Applications of On-line Simulation and Data Fusion

    OpenAIRE

    Chu, Lianyu; Recker, Will

    2004-01-01

    This report summarizes research work conducted under TO4143 at the California PATH ATMS Center at the University of California, Irvine. This project has two tasks: Functionality enhancements of the PARAMICS simulation model through API programming for the on-line simulation application; On-line data fusion algorithm for a better section travel time estimation based on point detector data and probe vehicle data. In order to conduct these two tasks, we complete the following two related studies...

  10. [Determination of paraquat and diquat in drinking water and environmental water by high performance liquid chromatography coupled with on-line clean-up and solid phase extraction].

    Science.gov (United States)

    Chen, Jing; Liu, Zhaojin; An, Baochao; Lu, Yan; Xu, Qun

    2012-10-01

    An on-line solid phase extraction (SPE) system was used to eliminate the interferences sufficiently and fulfill the simple and sensitive determination of diquat and paraquat in tap and pond water. This on-line SPE system used two SPE cartridges. One was an Acclaim Mixed-Mode WAX-1 cartridge for the elimination of anionic interferences; the other one was an Acclaim Mixed-Mode WCX-1 cartridge for the enrichment of diquat and paraquat and the elimination of co-enriched cationic interferences. The baseline separation of diquat and paraquat was achieved on an Acclaim Trinity P1 column. A dual-gradient high performance liquid chromatographic (HPLC) system provided an efficient platform to fulfill the on-line SPE and separation, and the system operated under automatic control of chromatography data system software. The complete analysis only required 16 min, and the detection limits of the method were 0.12 microg/L for diquat and 0.10 microg/L for paraquat. The method is simple, rapid and sensitive, and can be applied to the determination of diquat and paraquat in drinking water and environmental water.

  11. Color Laser Microscope

    Science.gov (United States)

    Awamura, D.; Ode, T.; Yonezawa, M.

    1987-04-01

    A color laser microscope utilizing a new color laser imaging system has been developed for the visual inspection of semiconductors. The light source, produced by three lasers (Red; He-Ne, Green; Ar, Blue; He-Cd), is deflected horizontally by an AOD (Acoustic Optical Deflector) and vertically by a vibration mirror. The laser beam is focused in a small spot which is scanned over the sample at high speed. The light reflected back from the sample is reformed to contain linear information by returning to the original vibration mirror. The linear light is guided to the CCD image sensor where it is converted into a video signal. Individual CCD image sensors are used for each of the three R, G, or B color image signals. The confocal optical system with its laser light source yields a color TV monitor image with no flaring and a much sharper resolution than that of the conventional optical microscope. The AOD makes possible a high speed laser scan and a NTSC or PAL TV video signal is produced in real time without any video memory. Since the light source is composed of R, G, and B laser beams, color separation superior to that of white light illumination is achieved. Because of the photometric linearity of the image detector, the R, G, and B outputs of the system are most suitably used for hue analysis. The CCD linear image sensors in the optical system produce no geometrical distortion, and good color registration is available principally. The output signal can be used for high accuracy line width measuring. The many features of the color laser microscope make it ideally suited for the visual inspection of semiconductor processing. A number of these systems have already been installed in such a capacity. The Color Laser Microscope can also be a very useful tool for the fields of material engineering and biotechnology.

  12. Modification of Hydroxyapatite Crystal Using IR Laser

    CERN Document Server

    Satoh, Saburoh; Goto, M; Guan, W; Hayashi, N; Ihara, S; Yamabe, C; Yamaguchi, Y

    2004-01-01

    The first application of laser technology to dentistry was for the removal of caries. However, reports of laser application on improvement of dental surface were emerged, much attention has been focused on the laser’s potential to enhance enamel’s hardness and resistance to acid. Most of the previous reports concentrated on the photo issue interaction. Few research has pursued the photochemical phenomenon occurred during laser irradiation on biological tissues. In order to find a creative method to remineralize the dissociating enamel and exposed coronal of dentine, the authors developed a novel procedure during laser irradiation. Slice of sound molar and artificial HAp pellet were irradiated separately, with CO2 laser under different laser parameters. Tow series of samples covered with saturation calcium ion solution were irradiated separately. To investigate the crystal morphology, XRD pattern were surveyed. The comparison of each cases show that the chemical coating affected the ablation process evidentl...

  13. Reducing off-line to on-line: An example and its applications

    Directory of Open Access Journals (Sweden)

    Demange Marc

    2003-01-01

    Full Text Available We study on-line versions of maximum weighted hereditary subgraph problems for which the instance is revealed in two clusters. We focus on the comparison of these on-line problems with their respective off-line versions. In [3], we have reduced on-line versions to the off-line ones in order to devise competitive analysis for such problems. In this paper, we first devise hardness results pointing out that this previous analysis was tight. Then, we propose a process that allows, for a large class of hereditary problems, to transform an on-line algorithm into an off-line one with improvement of the guarantees. This result can be seen as an inverse version of our previous work. It brings to the fore a hardness gap between on-line and off-line versions of those problems. This result does not apply in the case of maximizing a k -colorable induced subgraph of a given graph. For this problem we point out that, contrary to the first case, the on-line version is almost as well approximated as the offline one. .

  14. Safety shutdown separators

    Science.gov (United States)

    Carlson, Steven Allen; Anakor, Ifenna Kingsley; Farrell, Greg Robert

    2015-06-30

    The present invention pertains to electrochemical cells which comprise (a) an anode; (b) a cathode; (c) a solid porous separator, such as a polyolefin, xerogel, or inorganic oxide separator; and (d) a nonaqueous electrolyte, wherein the separator comprises a porous membrane having a microporous coating comprising polymer particles which have not coalesced to form a continuous film. This microporous coating on the separator acts as a safety shutdown layer that rapidly increases the internal resistivity and shuts the cell down upon heating to an elevated temperature, such as 110.degree. C. Also provided are methods for increasing the safety of an electrochemical cell by utilizing such separators with a safety shutdown layer.

  15. Acoustofluidic bacteria separation

    Science.gov (United States)

    Li, Sixing; Ma, Fen; Bachman, Hunter; Cameron, Craig E.; Zeng, Xiangqun; Huang, Tony Jun

    2017-01-01

    Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate Escherichia coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care sepsis diagnostic device.

  16. The measurement of capillary waves on a weldpool formed by a Nd:YAG laser

    CERN Document Server

    Deam, R T; Harris, J

    2002-01-01

    Experiments were performed using an on-line pyrometer to measure the capillary waves on a weldpool formed by a Nd: YAG laser. The surface temperature measurements taken from the weldpool revealed strong temporal fluctuations. Fourier transform of the pyrometer data revealed distinct peaks, consistent with calculated resonant frequencies for capillary surface waves on the weldpool formed by the laser. The possibility of using on-line measurement of surface temperature fluctuations to control weldpool depth in laser welds is discussed. The work forms part of an on-going programme to develop closed loop control for laser processing at Swinburne University

  17. Determination of the total concentration of highly protein-bound drugs in plasma by on-line dialysis and column liquid chromatography : application to non-steroidal anti-inflammatory drugs

    NARCIS (Netherlands)

    Herráez-Hernández, R; van de Merbel, N C; Brinkman, U A

    1995-01-01

    The potential of on-line dialysis as a sample preparation procedure for compounds highly bound to plasma proteins is evaluated, using non-steroidal anti-inflammatory drugs as model compounds and column liquid chromatography as the separation technique. Different strategies to reduce the degree of

  18. An edge sensitive 3D measurement using two directional laser stripes scanning with a laser projector

    Science.gov (United States)

    Li, Dong; Zhou, Xiang; Xu, Changda; Wang, Chao; Guo, Jiayu

    2017-09-01

    Laser scanning is widely used in on-line industrial 3D inspection, cultural heritage conservation and reverse engineering. However, in the traditional laser scanning, the most widely-used approach is based on the projection of a single directional laser stripe over an object. Because the width of the laser stripe is physically difficult to compress enough to be fine at the edge of the object, the traditional measurement method is not accurate for edge measurements. This paper proposes an edge sensitive 3D measurement system which is fast and accurate, using two directional laser stripes scanning with a laser projector. Scanning metal edge steps and complex surface edge with this system only require a single scanning to perform 3D reconstruction. So this scanning method has the advantages of high efficiency, high speed and edges with high precision.

  19. Oligosaccharide analysis by capillary-scale high-pH anion-exchange chromatography with on-line ion-trap mass spectrometry.

    Science.gov (United States)

    Bruggink, Cees; Wuhrer, Manfred; Koeleman, Carolien A M; Barreto, Victor; Liu, Yan; Pohl, Chris; Ingendoh, Arnd; Hokke, Cornelis H; Deelder, André M

    2005-12-27

    A capillary-scale high-pH anion-exchange chromatography (HPAEC) system for the analysis of carbohydrates was developed, in combination with two parallel on-line detection methods of sub-picomolar sensitivity: (1) pulsed amperometric detection (PAD); (2) capillary-scale desalting followed by electrospray ion-trap (IT) mass spectrometry (MS). The capillary chromatographic system combined the superb selectivity of HPAEC that allows routine separation of isomeric oligosaccharides with the information on monosaccharide sequence and linkage positions obtained by MS/MS fragmentation using the IT-MS. The applicability of the system in biomedical research was demonstrated by its use for the analysis of a urine sample of a GM1-gangliosidosis patient. Isomeric glycans in the sample could be resolved by HPAEC and assigned on the basis of the monosaccharide linkage information revealed by on-line IT-MS/MS.

  20. Development of On-Line High Performance Liquid Chromatography (HPLC-Biochemical Detection Methods as Tools in the Identification of Bioactives

    Directory of Open Access Journals (Sweden)

    Elizabeth Joubert

    2012-03-01

    Full Text Available Biochemical detection (BCD methods are commonly used to screen plant extracts for specific biological activities in batch assays. Traditionally, bioactives in the most active extracts were identified through time-consuming bio-assay guided fractionation until single active compounds could be isolated. Not only are isolation procedures often tedious, but they could also lead to artifact formation. On-line coupling of BCD assays to high performance liquid chromatography (HPLC is gaining ground as a high resolution screening technique to overcome problems associated with pre-isolation by measuring the effects of compounds post-column directly after separation. To date, several on-line HPLC-BCD assays, applied to whole plant extracts and mixtures, have been published. In this review the focus will fall on enzyme-based, receptor-based and antioxidant assays.

  1. Development of on-line high performance liquid chromatography (HPLC)-biochemical detection methods as tools in the identification of bioactives.

    Science.gov (United States)

    Malherbe, Christiaan J; de Beer, Dalene; Joubert, Elizabeth

    2012-01-01

    Biochemical detection (BCD) methods are commonly used to screen plant extracts for specific biological activities in batch assays. Traditionally, bioactives in the most active extracts were identified through time-consuming bio-assay guided fractionation until single active compounds could be isolated. Not only are isolation procedures often tedious, but they could also lead to artifact formation. On-line coupling of BCD assays to high performance liquid chromatography (HPLC) is gaining ground as a high resolution screening technique to overcome problems associated with pre-isolation by measuring the effects of compounds post-column directly after separation. To date, several on-line HPLC-BCD assays, applied to whole plant extracts and mixtures, have been published. In this review the focus will fall on enzyme-based, receptor-based and antioxidant assays.

  2. Development of On-Line High Performance Liquid Chromatography (HPLC)-Biochemical Detection Methods as Tools in the Identification of Bioactives

    Science.gov (United States)

    Malherbe, Christiaan J.; de Beer, Dalene; Joubert, Elizabeth

    2012-01-01

    Biochemical detection (BCD) methods are commonly used to screen plant extracts for specific biological activities in batch assays. Traditionally, bioactives in the most active extracts were identified through time-consuming bio-assay guided fractionation until single active compounds could be isolated. Not only are isolation procedures often tedious, but they could also lead to artifact formation. On-line coupling of BCD assays to high performance liquid chromatography (HPLC) is gaining ground as a high resolution screening technique to overcome problems associated with pre-isolation by measuring the effects of compounds post-column directly after separation. To date, several on-line HPLC-BCD assays, applied to whole plant extracts and mixtures, have been published. In this review the focus will fall on enzyme-based, receptor-based and antioxidant assays. PMID:22489144

  3. Application of an on-line measurement system for HF emission control (1. part); Application d'un systeme de mesure en ligne pour la controle des emissions de fluor (1. partie)

    Energy Technology Data Exchange (ETDEWEB)

    Monfort, E.; Celades, I.; Gomart, S.; Gazulla, F. [Instituto de Tecnologia Ceramica (ITC), Asociacion de Investigacion de las Industrias Ceramicas, Universitat Jaume 1, Castellon (Spain); Adams, H. [Boreal Laser Limited, Alberta (Canada); Tulip, J. [Alberta Univ., Edmonton, AB (Canada). Dept. of Electrical Engineering

    2004-12-01

    The present study describes the adaptation of an on-line HF analyser in real time, based on laser technology, for control of emissions from ceramic tile manufacturing kilns. The operation of the equipment was verified in several industrial facilities. The verification method consisted of comparing the on-line measuring system data with the results obtained in batch gas samplings (chemical method). For the batch determination of the fluorine concentration, an internal method developed by the Instituto de Tecnologia Ceramica (hereafter ITC), based on standard methods, has been used. ITC is accredited by the Spanish National Accreditation Body (ENAC) for the performance of this type of sampling. The on-line HF measurement system has been used to study the behaviour of HF emissions in standard ceramic tile firing kiln operating conditions and on implementing different actions in these kilns. (authors)

  4. On-line sample processing involving microextraction techniques as a front-end to atomic spectrometric detection for trace metal assays: A review

    Energy Technology Data Exchange (ETDEWEB)

    Miró, Manuel, E-mail: manuel.miro@uib.es [FI-TRACE Group, Department of Chemistry, Faculty of Sciences, University of the Balearic Islands, E-07122 Palma de Mallorca, Illes Balears (Spain); Hansen, Elo Harald [Granåsen 93, DK-2800 Kgs. Lyngby (Denmark)

    2013-06-11

    Graphical abstract: -- Highlights: •Role of flow injection in automation of microextraction techniques for metal assays. •On-line coupling of liquid phase microextraction (LPME) to atomic spectrometry. •Critical evaluation of on-line single drop and dispersive LPME. •On-line coupling of micro-solid phase extraction (μSPE) to atomic spectrometry. •Critical appraisal of magnetic/carbon nanoparticles and biomass for on-line μSPE. -- Abstract: Within the last decade, liquid-phase microextraction (LPME) and micro-solid phase extraction (μSPE) approaches have emerged as substitutes for conventional sample processing procedures for trace metal assays within the framework of green chemistry. This review surveys the progress of the state of the art in simplification and automation of microextraction approaches by harnessing to the various generations of flow injection (FI) as a front end to atomic absorption spectrometry (AAS), atomic fluorescence spectrometry (AFS) or inductively coupled plasma atomic emission spectrometry or mass spectrometry (ICP-AES/MS). It highlights the evolution of flow injection analysis and related techniques as vehicles for appropriate sample presentation to the detector and expedient on-line matrix separation and pre-concentration of trace levels of metals in troublesome matrices. Rather than being comprehensive this review is aimed at outlining the pros and cons via representative examples of recent attempts in automating green sample preparation procedures in an FI or sequential injection (SI) mode capitalizing on single-drop microextraction, dispersive liquid-phase microextraction and advanced sorptive materials including carbon and metal oxide nanoparticles, ion imprinted polymers, superparamagnetic nanomaterials and biological/biomass sorbents. Current challenges in the field are identified and the synergetic combination of flow analysis, nanotechnology and metal-tagged biomolecule detection is envisaged.

  5. Enhancing communication skills for pediatric visits through on-line training using video demonstrations

    Directory of Open Access Journals (Sweden)

    Wissow Larry

    2008-02-01

    Full Text Available Abstract Background Training in communication skills for health professionals is important, but there are substantial barriers to individual in-person training for practicing clinicians. We evaluated the feasibility and desirability of on-line training and sought suggestions for future courses. Methods Based on successful in-person curricula for communication skills and our previous on-line curricula, we created an on-line course consisting of 28 modules (4.75 hours CME credit about communication skills during pediatric visits that included a mental health concern; each module included a brief case, a multiple choice question, an explanation, and a 1–2 minute video demonstrating key skills. Specific communication skills included: greeting, setting an agenda, discussing diagnosis and treatment, and managing negative interactions. The course was announced by emails in spring, 2007; the course was available on-line for 60 days; we aimed to enroll 50 clinicians. Outcomes were analyzed for those who evaluated the course within 75 days of its initial availability. Results Overall, 61 clinicians registered, of whom most were nurses (N = 24, physicians (N = 22, or psychologists or social workers (N = 12. Of the 36 (59% clinicians who evaluated the course, over 85% agreed that all course objectives had been met; over 90% reported greater confidence in greetings and agenda-setting; and over 80% reported greater confidence in discussing diagnosis and treatment and managing negative interactions. Nearly all, 97% would recommend the course to other clinicians and trainees. Suggestions for improvement included a library of additional video vignettes and written materials to accompany the on-line training. Conclusion On-line training in communication skills for pediatric mental health visits is feasible, desirable and associated with increased confidence in key skills. Positive feedback from clinicians suggests that a comparison of on-line versus in

  6. On-line coupling of counter-current chromatography and macroporous resin chromatography for continuous isolation of arctiin from the fruit of Arctium lappa L.

    Science.gov (United States)

    Guo, Mengzhe; Liang, Junling; Wu, Shihua

    2010-08-13

    In this work, we have developed a novel hybrid two-dimensional counter-current chromatography and liquid chromatography (2D CCC x LC) system for the continuous purification of arctiin from crude extract of Arctium lappa. The first dimensional CCC column has been designed to fractionalize crude complex extract into pure arctiin effluent using a one-component organic/salt-containing system, and the second dimensional LC column has been packed with macroporous resin for on-line adsorption, desalination and desorption of arctiin which was effluent purified from the first CCC dimension. Thus, the crude arctiin mixture has been purified efficiently and conveniently by on-line CCC x LC in spite of the use of a salt-containing solvent system in CCC separation. As a result, high purity (more than 97%) of arctiin has been isolated by repeated injections both using the ethyl acetate-8% sodium chloride aqueous solution and butanol-1% sodium chloride aqueous solution. By contrast with the traditional CCC processes using multi-component organic/aqueous solvent systems, the present on-line CCC x LC process only used a one-component organic solvent and thus the solvent is easier to recover and regenerate. All of used solvents such as ethyl acetate, n-butanol and NaCl aqueous solution are low toxicity and environment-friendly. Moreover, the lower phase of salt-containing aqueous solution used as mobile phase, only contained minor organic solvent, which will save much organic solvent in continuous separation. In summary, our results indicated that the on-line hybrid 2D CCC x LC system using one-component organic/salt-containing aqueous solution is very promising and powerful tool for high-throughput purification of arctiin from fruits of A. lappa. 2010 Elsevier B.V. All rights reserved.

  7. EURISOL-DS Multi-MW Target: Cavitations detection by the a Laser Doppler Vibrometer

    CERN Document Server

    Cyril Kharoua, Yacine Kadi, Jacques Lettry, Laure Blumenfeld, Karel Samec (CERN)Knud Thomsen, Sergej Dementevjs, Rade Milenkovich (PSI)Anatoli Zik, Erik Platacis (IPUL)

    This technical note summarises the innovative measurement devices used within Task #2 of the European Isotope Separation On-Line Radioactive Ion Beam Facility Design Study (EURISOL-DS) to detect the occurrence of cavitation in liquid metal flowing inside the CGS target mock-up.During the METEX hydraulic experiment carried out at IPUL (Institute of Physics of the University of Latvia), a Laser Doppler Vibrometer was used to characterize the wall vibrations of the beam window at different flow regimes. A series of tests proved the high sensitivity of the LDV to detect the occurrence of cavitation in the liquid metal flowing inside the target. In this context, a dedicated test procedure was developed to establish the validity of using LDV for detecting the onset of cavitation.

  8. The ADvanced SEParation (ADSEP)

    Science.gov (United States)

    1998-01-01

    The ADvanced SEParation (ADSEP) commercial payload is making use of major advances in separation technology: The Phase Partitioning Experiment (PPE); the Micorencapsulation experiment; and the Hemoglobin Separation Experiment (HSE). Using ADSEP, commercial researchers will attempt to determine the partition coefficients for model particles in a two-phase system. With this information, researchers can develop a higher resolution, more effective cell isolation procedure that can be used for many different types of research and for improved health care. The advanced separation technology is already being made available for use in ground-based laboratories.

  9. Separation of flow

    CERN Document Server

    Chang, Paul K

    2014-01-01

    Interdisciplinary and Advanced Topics in Science and Engineering, Volume 3: Separation of Flow presents the problem of the separation of fluid flow. This book provides information covering the fields of basic physical processes, analyses, and experiments concerning flow separation.Organized into 12 chapters, this volume begins with an overview of the flow separation on the body surface as discusses in various classical examples. This text then examines the analytical and experimental results of the laminar boundary layer of steady, two-dimensional flows in the subsonic speed range. Other chapt

  10. Comportamento do Consumidor On-line: a perspectiva da teoria do fluxoOn-line Consumer Behavior: the flow theory perspectiveComportamiento del consumidor On-line: la perspectiva de la teoría del flujo

    Directory of Open Access Journals (Sweden)

    FARIAS, Salomão Alencar de

    2008-03-01

    Full Text Available RESUMOEste artigo investiga o comportamento do consumidor on-line com base no fluxo, definido como a sensação holística que as pessoas sentem quando agem com total envolvimento em uma atividade (CSIKSZENTMIHALYI, 1975. Emprega-se essa teoria para melhor compreender o comportamento de compra pela Internet, embora seja um conceito ainda confuso na literatura do comportamento do consumidor, pois que não existe um consenso a respeito de quais os fatores antecedem, caracterizam ou são conseqüências do estado de fluxo. Desse modo, esta pesquisa buscou identificar os construtos, relacionados ao estado de fluxo, que devem fazer parte de um esquema de comportamento de compra on-line, além de indicar qual a sua aplicabilidade para o alcance da satisfação do consumidor na compra pela rede. Para tanto, foi utilizada uma metodologia de caráter descritivo com aplicação de um survey junto a uma amostra de 237 consumidores do varejo eletrônico. Os dados coletados foram analisados por meio de técnicas estatísticas multivariadas. Os resultados indicaram que o ambiente on-line e a telepresença antecedem o fluxo que, por sua vez, está associado ao comportamento exploratório, efeito positivo do processo de navegação, compra e satisfação com o processo de compra.ABSTRACTThis article investigates the on-line consumer behavior based on the flow theory, defined as the holistic sensation that people feel when acting with total involvement in an activity (CSIKSZENTMIHALYI, 1975. This theory has been used for better understanding the purchase behavior through the Internet, although this concept is still not sufficiently clear in consumer behavior literature, since it does not exist a consensus regarding which factors that precede, characterize or are consequences of the flow state. Thus, the present research was aimed at identifying the constructs related to the flow state that must be part of an on-line purchase behavior framework, indicating which

  11. Lasers technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners.

  12. Laser program annual report, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, L.W.; Krupke, W.F.; Strack, J.R. (eds.)

    1981-06-01

    Volume 3 is comprised of three sections, beginning with Section 8 on Advanced Lasers. Both theoretical and experimental research and development activities on advanced laser systems are presented here. Section 9 contains the results of studies in areas of energy and military applications, including those relating to electrical energy production by inertial confinement fusion systems. Finally, Section 10 presents results from selected activities in the Advanced Isotope Separation Program.

  13. Laser handbook

    CERN Document Server

    Bass, Michael

    1985-01-01

    Volume 4 of the Laser Handbook continues the high standard set by the first three volumes which were widely acclaimed by numerous reviewers in Science, Optical Spectra and Laser Technology, as presenting an outstanding contribution to the field of laser technology.

  14. Microchip Lasers

    Science.gov (United States)

    2016-10-31

    USA E-mail: zayhowski@ll.mit.edu Abstract Microchip lasers are a rich family of solid-state lasers defined by their small size, robust integration...reliability, and potential for low-cost mass production. Continuous-wave microchip lasers cover a wide range of wavelengths, often operate single

  15. Lasers (Rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Hellman, Hal

    1969-01-01

    A laser is an instrument that produces an enormously intense pencil-thin beam of light. In this booklet we shall learn what there is about the laser that gives it so much promise. We shall investigate what it is, how it works, and the different kinds of lasers there are.

  16. On-line continuous generation of zinc chelates in the vapor phase by reaction with sodium dithiocarbamates and determination by atomic fluorescence spectrometry

    Science.gov (United States)

    Duan, Xuchuan; Sun, Rui; Fang, Jinliang

    2017-02-01

    The present study shows for the first time that a volatile zinc chelate species can be generated by the on-line continuous merging of an acidified sample solution with an aqueous sodium diethyldithiocarbamate solution followed by rapid separation using a frit-based bubble gas-liquid separator at room temperature. The operating conditions for the generation of the vaporous zinc chelate were preliminarily investigated by non-dispersive atomic fluorescence spectrometry. The possible mechanism of zinc vapor generation is discussed. The study shows that the volatile species is an intermediate species with very similar properties to diethyldithiocarbamic acid and a very short half-life in the acidic solution. Moreover, this species can only be generated by on-line mixing and rapid separation. The efficiency of generation was 33-85% depending on acidity. Under optimal conditions, the flow rates of the sample and Na-DDTC solution were 1.3 ml min- 1, the carrier argon flow rate was 225 ml min- 1, the acid concentration of the sample solution and the concentration of Na-DDTC were 0.05 M and 0.4% (m/v), respectively, the detection limit of zinc was 0.33 (3σ) ng ml- 1, and the relative standard deviation (RSD) was 1.3%. The accuracy of the method was verified by the determination of zinc in the plant reference materials GBW10015 (spinach) and GBW10045 (rice). The results were in good agreement with the certified reference values.

  17. Simultaneous separation of five major ribonucleic acids by capillary electrophoresis with laser-induced fluorescence in the presence of electroosmotic flow: application to the rapid screening of 5S rRNA from ovarian cancer cells.

    Science.gov (United States)

    Shih, Ya-Chu; Liao, Ching-Ru; Chung, I-Che; Chang, Yu-Sun; Chang, Po-Ling

    2014-10-17

    RNA integrity is important in RNA studies because poor RNA quality may impact downstream methodologies. This study proposes a rapid and cost-effective method for the determination of RNA integrity based on CE-LIF in the presence of electroosmotic flow. The proposed method uses poly(ethylene) oxide (Mavg=4,000,000 Da) as a sieving matrix for total RNA separation. Ethidium bromide (μg mL(-1)) was dissolved in a polymer solution as an interchelating dye for on-column fluorescent labeling. The 28S rRNA, 18S rRNA, 5.8S rRNA, 5S rRNA and tRNA from the total human RNA extracted from the cells were fully separated using the proposed method. The lowest detectable concentration of total RNA achieved was 100 pg μL(-1) with a 6 min sample injection followed by on-column concentration. In addition, the temperature-induced degradation of total RNA was observed by CE-LIF. The electropherograms revealed more fragmentation of 28S and 18S rRNAs by temperature-induced hydrolysis compared with the 5.8S rRNA, 5S rRNA and tRNA. Therefore, the results indicated that RNA degradation should be considered for long-term, high-temperature incubations in RNA-related experiments involving RNA hybridization. The proposed method is furthermore, applied to the determination of 5S rRNA overexpressed in ovarian cancer cells as compared to the cervical cancer cells. Overall, CE-LIF is highly promising for rapid screening of ovarian cancers without tedious pre-amplification steps. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Research on the Influence of Perceived Risk in Consumer On-line Purchasing Decision

    Science.gov (United States)

    Hong, Zhao; Yi, Li

    Perceived risk is an important factor that affects consumer's on-line shopping purchasing decision, through the perceived theories the consumer can know clearly which step owns higher risk in the whole shopping process, then learn how to prevent it, this process also strengthen the consumer confidence, thus lowering to know that the risk adjudicate to the feeling, so the essay has important and realistic meaning for further expand the electronic commerce. At first, investigate, collect, tidy up, analyze the questionnaire information, and thus get the primary data. Finally try to find out the influence of perceived risk to each stage of purchasing decision during consumer on-line shopping process with data and personal analytical. The paper is a complement to the local and existing perceived theories. The result of the study manifests that, the order of main perceived risks which felt by consumer during on-line shopping process are as follow: financial risk, the performance risk and service risk.

  19. On-Line Monitoring of Fermentation Processes by Near Infrared and Fluorescence Spectroscopy

    DEFF Research Database (Denmark)

    Svendsen, Carina

    of on-line monitoring systems. The primary aim of this thesis is to elucidate and explore the dynamics in fermentation processes by spectroscopy. Though a number of successful on-line lab-scale monitoring systems have been reported, it seems that several challenges are still met, which limits the number......Monitoring and control of fermentation processes is important to ensure high product yield, product quality and product consistency. More knowledge on on-line analytical techniques such as near infrared and fluorescence spectroscopy is desired in the fermentation industry to increase the efficiency...... or decrease was observed in the fluorescence landscapes. This thesis presents a correction strategy based on a chemometric modelling approach, where weighted non-linear regression and weighted PARAFAC analysis are combined. Based on the research conducted in this PhD project, it is concluded that near...

  20. Process Analytical Technology and On-Line Spectroscopic Measurements of Chemical Meat Quality

    DEFF Research Database (Denmark)

    Sørensen, Klavs Martin

    analysis. An on-line NIR instrument is presented, capable of performing in high production speed (1200 measurements per hour). The system is calibrated against a GC-MS standard, yielding an error comparable to the accuracy of the reference. Boar taint detection has become a hot topic, as an EU ban......This thesis deals with process analytical technology and how it can be implemented in the meat industry through on-line grading of chemical meat quality. The focus will be on two applications, namely the rapid quality control of fat quality and the development of a method for on-line detection...... of boar taint. The chemical makeup of fat has a large effect on meat cut quality. Fat quality has traditionally been determined by methylation of a tissue sample followed by chromatography on a GC-MS system, elucidating the composition of the individual fatty acids. As this procedure typically takes far...

  1. Helping operators improve plant performance emdash HEATXPRT; An on-line expert system

    Energy Technology Data Exchange (ETDEWEB)

    Henry, R.E.; Sopocy, D.M.; Montanus, J.A. (Sargent and Lundy, Chicago, IL (US)); Blanco, M.A. (Electric Power Research Inst., Palo Alto, CA (US)); Bleakley, K.W. (Northern Indiana Public Service Co., Hammond, IN (US)); Perry, S.A. (Will County Station, Commonwealth Edison Co., Romeoville, IL (US))

    1992-01-01

    An on-line expert system for fossil fuel power plants, Heat Rate Degradation Advisor, or HEATXPRT, is being developed. This expert system will be used to automate the interpretation of plant operating data using available on-line plant physical and performance data, along with manual input of additional measurements and observations when necessary. This expert system will operate on a microcomputer and will interface with existing plant data acquisition and/or thermal performance monitoring systems, which presents a variety of design challenges. Several significant features of this expert system are discussed in this paper, including the design of a modular expert system architecture, design of a consistent user interface, development of a standard specification for information transfer, application of sensor validation techniques, and development of a knowledge base suitable for the interpretation of on-line data.

  2. Administering Spatial and Cognitive Instruments In-class and On-line: Are These Equivalent?

    Science.gov (United States)

    Williamson, Kenneth C.; Williamson, Vickie M.; Hinze, Scott R.

    2017-02-01

    Standardized, well-established paper-and-pencil tests, which measure spatial abilities or which measure reasoning abilities, have long been found to be predictive of success in the STEM (science, technology, engineering, and mathematics) fields. Instructors can use these tests for prediction of success and to inform instruction. A comparative administration of spatial visualization and cognitive reasoning tests, between in-class (proctored paper and pencil) and on-line (unproctored Internet) ( N = 457), was used to investigate and to determine whether the differing instrument formats yielded equal measures of spatial ability and reasoning ability in large first-semester general chemistry sections. Although some gender differences were found, findings suggest that some differences across administration formats, but that on-line administration had similar properties of predicting chemistry performance as the in-class version. Therefore, on-line administration is a viable option for instructors to consider especially when dealing with large classes.

  3. On-line Shopping on B2C Markets in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Pilík Michal

    2012-12-01

    Full Text Available The paper deals with the e-commerce theory and is aimed primarily at its usage in business-toconsumer markets. On-line purchasing management is increasing not only in the Czech Republic but also in Europe and all over the world. The customers who think rationally use on-line shopping because of money saving, speed delivery and the possibility of product comparison. This paper presents the results of a project financed by the Czech Science Foundation P403/11/ P175: The factors influencing customers’ on-line behaviour in e-commerce environment on B2C and B2B markets in the Czech Republic. 89 % of respondents use e-shops for buying products in the Czech Republic. 32 % of them use the Internet for regular purchases and 57 % of them irregularly. 11 % of respondents have not used e-shops yet.

  4. On-line interprofessional learning: introducing constructivism through enquiry-based learning and peer review.

    Science.gov (United States)

    Hughes, Matthew; Ventura, Susie; Dando, Mark

    2004-08-01

    Interest in on-line methods of learning has accelerated in recent years. There has also been an interest in developing student-centred approaches to learning and interprofessional education. This paper illustrates the issues in designing a large (more than 700 students), on-line, inter-professional module for third year, undergraduate students drawn from nine professional healthcare courses and from four campus sites. It uses an enquiry-based learning approach. The learning theories of Piaget, Vygotsky and Schön are integrated with the on-line frameworks of Salmon and Collis et al., together with conclusions drawn from the literature and our own experiences, to produce a design that encourages students to learn through participation, re-iteration, peer-review and reflection. Consideration is given to improving student motivation and attitudes towards change, both in the design and the delivery of the module.

  5. Nonterminal Separating Macro Grammars

    NARCIS (Netherlands)

    Hogendorp, Jan Anne

    1987-01-01

    We extend the concept of nonterminal separating (or NTS) context-free grammar to nonterminal separating $m$-macro grammar where the mode of derivation $m$ is equal to "unrestricted". "outside-in' or "inside-out". Then we show some (partial) characterization results for these NTS $m$-macro grammars.

  6. Working with Separation

    Science.gov (United States)

    Krugman, Dorothy C.

    1971-01-01

    Discusses the role of the caseworker in providing support to children experiencing separation from their families and emphasizes the need to recognize that there are differences between those separation experiences dictated by the needs of children and those dictated by arbitrary or noncasework factors. (AJ)

  7. Separation anxiety disorder

    NARCIS (Netherlands)

    Nauta, M.H.; Emmelkamp, P.M.G.; Sturmey, P.; Hersen, M.

    2012-01-01

    Separation anxiety disorder (SAD) is the only anxiety disorder that is specific to childhood; however, SAD has hardly ever been addressed as a separate disorder in clinical trials investigating treatment outcome. So far, only parent training has been developed specifically for SAD. This particular

  8. Social Separation in Monkeys.

    Science.gov (United States)

    Mineka, Susan; Suomi, Stephen J.

    1978-01-01

    Reviews phenomena associated with social separation from attachment objects in nonhuman primates. Evaluates four theoretical treatments of separation in light of existing data: Bowlby's attachment-object-loss theory, Kaufman's conservation-withdrawal theory, Seligman's learned helplessness theory, and Solomon and Corbit's opponent-process theory.…

  9. Rapid dereplication of estrogenic compounds in pomegranate (Punica granatum) using on-line biochemical detection coupled to mass spectrometry.

    Science.gov (United States)

    van Elswijk, Danny A; Schobel, Uwe P; Lansky, Ephraim P; Irth, Hubertus; van der Greef, Jan

    2004-01-01

    During recent years, phytoestrogens have been receiving an increasing amount of interest, as several lines of evidence suggest a possible role in preventing a range of diseases, including the hormonally dependent cancers. In this context, various parts of the pomegranate fruit (Punica granatum; Punicaceae), e.g. seed oil, juice, fermented juice and peel extract, have been shown to exert suppressive effects on human breast cancer cells in vitro. On-line biochemical detection coupled to mass spectrometry (LC-BCD-MS) was applied to rapidly profile the estrogenic activity in the pomegranate peel extract. The crude mixture was separated by HPLC, after which the presence of biologically active compounds, known or unknown, was detected by means of an on-line beta-estrogen receptor (ER) bioassay. Chemical information, such as molecular weight and MS/MS fingerprint, was obtained in real time by directing part of the HPLC effluent towards a mass spectrometer. Using this approach in total three estrogenic compounds, i.e. luteolin, quercetin and kaempferol, were detected and identified by comparing the obtained molecular weights and negative ion APCI MS/MS spectra with the data of an estrogenic compound library. Although well known in literature and widely distributed in nature, the presence of these phytoestrogenic compounds in pomegranate peel extract was not reported previously. Compared to traditional screening approaches of complex mixtures, often characterized by a repeating cycle of HPLC fractionation and biological screening, LC-BCD-MS was shown to profoundly accelerate the time required for compound description and identification.

  10. First results of the INSIDE in-beam PET scanner for the on-line monitoring of particle therapy treatments

    Science.gov (United States)

    Piliero, M. A.; Belcari, N.; Bisogni, M. G.; Camarlinghi, N.; Cerello, P.; Coli, S.; Del Guerra, A.; Ferrero, V.; Fiorina, E.; Giraudo, G.; Kostara, E.; Morrocchi, M.; Pennazio, F.; Peroni, C.; Pirrone, G.; Rivetti, A.; Rolo, M. D.; Rosso, V.; Sportelli, G.; Wheadon, R.

    2016-12-01

    Quality assessment of particle therapy treatments by means of PET systems has been carried out since late `90 and it is one of the most promising in-vivo non invasive monitoring techniques employed clinically. It can be performed with a diagnostic PET scanners installed outside the treatment room (off-line monitoring) or inside the treatment room (in-room monitoring). However the most efficient way is by integrating a PET scanner with the treatment delivery system (on-line monitoring) so that the biological wash out and the patient repositioning errors are minimized. In this work we present the performance of the in-beam PET scanner developed within the INSIDE project. The INSIDE PET scanner is made of two planar heads, 10 cm wide (transaxially) and 25 cm long (axially), composed of pixellated LFS crystals coupled to Hamamatsu MPPCs. Custom designed Front-End Electronics (FE) and Data AcQuisition (DAQ) systems allow an on-line reconstruction of PET images from separated in-spill and inter-spill data sets. The INSIDE PET scanner has been recently delivered at the CNAO (Pavia, Italy) hadrontherapy facility and the first experimental measurements have been carried out. Homogeneous PMMA phantoms and PMMA phantoms with small air and bone inserts were irradiated with monoenergetic clinical proton beams. The activity range was evaluated at various benchmark positions within the field of view to assess the homogeneity of response of the PET system. Repeated irradiations of PMMA phantoms with clinical spread out Bragg peak proton beams were performed to evaluate the reproducibility of the PET signal. The results found in this work show that the response of the INSIDE PET scanner is independent of the position within the radiation field. Results also show the capability of the INSIDE PET scanner to distinguish variations of the activity range due to small tissue inhomogeneities. Finally, the reproducibility of the activity range measurement was within 1 mm.

  11. [Laser vaporization of the prostate: all as it should be?].

    Science.gov (United States)

    Reich, O; Seitz, M

    2008-04-01

    Laser vaporization of the prostate currently occupies a prominent place among the surgical options for treatment of benign prostatic syndrome. Particularly the so-called GreenLight laser vaporization with the KTP (80 W) or LBO (120 W) laser has become remarkably widespread throughout the world. There are already 100 of these GreenLight laser systems in use in Germany alone. The introduction of a separate DRG for "laser vaporization" is expected to further increase the significance of this surgical technique. The aim of this study is to evaluate laser vaporization as a whole and to identify possible differences between the different lasers.

  12. Plasmodium species differentiation by non-expert on-line volunteers for remote malaria field diagnosis.

    Science.gov (United States)

    Ortiz-Ruiz, Alejandra; Postigo, María; Gil-Casanova, Sara; Cuadrado, Daniel; Bautista, José M; Rubio, José Miguel; Luengo-Oroz, Miguel; Linares, María

    2018-01-30

    Routine field diagnosis of malaria is a considerable challenge in rural and low resources endemic areas mainly due to lack of personnel, training and sample processing capacity. In addition, differential diagnosis of Plasmodium species has a high level of misdiagnosis. Real time remote microscopical diagnosis through on-line crowdsourcing platforms could be converted into an agile network to support diagnosis-based treatment and malaria control in low resources areas. This study explores whether accurate Plasmodium species identification-a critical step during the diagnosis protocol in order to choose the appropriate medication-is possible through the information provided by non-trained on-line volunteers. 88 volunteers have performed a series of questionnaires over 110 images to differentiate species (Plasmodium falciparum, Plasmodium ovale, Plasmodium vivax, Plasmodium malariae, Plasmodium knowlesi) and parasite staging from thin blood smear images digitalized with a smartphone camera adapted to the ocular of a conventional light microscope. Visual cues evaluated in the surveys include texture and colour, parasite shape and red blood size. On-line volunteers are able to discriminate Plasmodium species (P. falciparum, P. malariae, P. vivax, P. ovale, P. knowlesi) and stages in thin-blood smears according to visual cues observed on digitalized images of parasitized red blood cells. Friendly textual descriptions of the visual cues and specialized malaria terminology is key for volunteers learning and efficiency. On-line volunteers with short-training are able to differentiate malaria parasite species and parasite stages from digitalized thin smears based on simple visual cues (shape, size, texture and colour). While the accuracy of a single on-line expert is far from perfect, a single parasite classification obtained by combining the opinions of multiple on-line volunteers over the same smear, could improve accuracy and reliability of Plasmodium species

  13. Treatment of hepatic encephalopathy by on-line hemodiafiltration: a case series study

    Directory of Open Access Journals (Sweden)

    Sugiyama Mitsugi

    2010-05-01

    Full Text Available Abstract Background It is thought that a good survival rate of patients with acute liver failure can be achieved by establishing an artificial liver support system that reliably compensates liver function until the liver regenerates or a patient undergoes transplantation. We introduced a new artificial liver support system, on-line hemodiafiltration, in patients with acute liver failure. Methods This case series study was conducted from May 2001 to October 2008 at the medical intensive care unit of a tertiary care academic medical center. Seventeen consecutive patients who admitted to our hospital presenting with acute liver failure were treated with artificial liver support including daily on-line hemodiafiltration and plasma exchange. Results After 4.9 ± 0.7 (mean ± SD on-line hemodiafiltration sessions, 16 of 17 (94.1% patients completely recovered from hepatic encephalopathy and maintained consciousness for 16.4 ± 3.4 (7-55 days until discontinuation of artificial liver support (a total of 14.4 ± 2.6 [6-47] on-line hemodiafiltration sessions. Significant correlation was observed between the degree of encephalopathy and number of sessions of on-line HDF required for recovery of consciousness. Of the 16 patients who recovered consciousness, 7 fully recovered and returned to society with no cognitive sequelae, 3 died of complications of acute liver failure except brain edema, and the remaining 6 were candidates for liver transplantation; 2 of them received living-related liver transplantation but 4 died without transplantation after discontinuation of therapy. Conclusions On-line hemodiafiltration was effective in patients with acute liver failure, and consciousness was maintained for the duration of artificial liver support, even in those in whom it was considered that hepatic function was completely abolished.

  14. Laser Program annual report 1984

    Energy Technology Data Exchange (ETDEWEB)

    Rufer, M.L.; Murphy, P.W. (eds.)

    1985-06-01

    The Laser Program Annual Report is part of the continuing series of reports documenting the progress of the unclassified Laser Fusion Program at the Lawrence Livermore National Laboratory (LLNL). As in previous years, the report is organized programmatically. The first section is an overview of the basic goals and directions of the LLNL Inertial Confinement Fusion (ICF) Program, and highlights the year's important accomplishments. Sections 2 through 7 provide the detailed information on the various program elements: Laser Systems and Operations, Target Design, Target Fabrication, Laser Experiments and Advanced Diagnostics, Advanced Laser Development, and Applications of Inertial Confinement Fusion. Individual sections will be indexed separately. 589 refs., 333 figs., 25 tabs.

  15. The 1-way on-line coupled atmospheric chemistry model system MECO(n) - Part 3: Meteorological evaluation of the on-line coupled system

    Science.gov (United States)

    Hofmann, C.; Kerkweg, A.; Wernli, H.; Jöckel, P.

    2012-01-01

    Three detailed meteorological case studies are conducted with the global and regional atmospheric chemistry model system ECHAM5/MESSy(→COSMO/MESSy)n, shortly named MECO(n). The aim of this article is to assess the general performance of the on-line coupling of the regional model COSMO to the global model ECHAM5. The cases are characterised by intense weather systems in Central Europe: a cold front passage in March 2010, a convective frontal event in July 2007, and the high impact winter storm "Kyrill" in January 2007. Simulations are performed with the new on-line-coupled model system and compared to classical, off-line COSMO hindcast simulations driven by ECMWF analyses. Precipitation observations from rain gauges and ECMWF analysis fields are used as reference, and both qualitative and quantitative measures are used to characterise the quality of the various simulations. It is shown that, not surprisingly, simulations with a shorter lead time generally produce more accurate simulations. Irrespective of lead time, the accuracy of the on-line and off-line COSMO simulations are comparable for the three cases. This result indicates that the new global and regional model system MECO(n) is able to simulate key mid-latitude weather systems, including cyclones, fronts, and convective precipitation, as accurately as present-day state-of-the-art regional weather prediction models in standard off-line configuration. Therefore, MECO(n) will be applied to simulate atmospheric chemistry exploring the model's full capabilities during meteorologically challenging conditions.

  16. The 1-way on-line coupled atmospheric chemistry model system MECO(n – Part 3: Meteorological evaluation of the on-line coupled system

    Directory of Open Access Journals (Sweden)

    C. Hofmann

    2012-01-01

    Full Text Available Three detailed meteorological case studies are conducted with the global and regional atmospheric chemistry model system ECHAM5/MESSy(→COSMO/MESSyn, shortly named MECO(n. The aim of this article is to assess the general performance of the on-line coupling of the regional model COSMO to the global model ECHAM5. The cases are characterised by intense weather systems in Central Europe: a cold front passage in March 2010, a convective frontal event in July 2007, and the high impact winter storm "Kyrill" in January 2007. Simulations are performed with the new on-line-coupled model system and compared to classical, off-line COSMO hindcast simulations driven by ECMWF analyses. Precipitation observations from rain gauges and ECMWF analysis fields are used as reference, and both qualitative and quantitative measures are used to characterise the quality of the various simulations. It is shown that, not surprisingly, simulations with a shorter lead time generally produce more accurate simulations. Irrespective of lead time, the accuracy of the on-line and off-line COSMO simulations are comparable for the three cases. This result indicates that the new global and regional model system MECO(n is able to simulate key mid-latitude weather systems, including cyclones, fronts, and convective precipitation, as accurately as present-day state-of-the-art regional weather prediction models in standard off-line configuration. Therefore, MECO(n will be applied to simulate atmospheric chemistry exploring the model's full capabilities during meteorologically challenging conditions.

  17. An on-line method to monitor BWR core stability based on an autocorrelation method

    Energy Technology Data Exchange (ETDEWEB)

    Yokomizo, Osamu; Masuhara, Yasuhiro (Hitachi Ltd., Ibaraki (Japan). Energy Research Lab.); Yoshimoto, Yuichiro (Hitachi Ltd., Ibaraki (Japan). Hitachi Works)

    1990-03-01

    A on-line monitoring method is introduced for BWR core stability. The method utilizes only autocorrelation values for two delay time intervals. Its simplicity makes it suitable for an on-line monitor. Accuracy of the core decay ratio calculated by the method improves as the core condition approaches instability. The error in the decay ratio for regional limit cycle oscillations is 0.2% when calculated from local signals in the most unstable region, and 4% when calculated from core averaged signals. (orig.).

  18. On-line Professional Learning Communities: Increasing Teacher Learning and Productivity in Isolated Rural Communities

    Directory of Open Access Journals (Sweden)

    Dora Salazar

    2010-08-01

    Full Text Available On-line and distance professional learning communities provides teachers with increased access and flexibility as well as the combination of work and education. It also provides a more learner-centered approach, enrichment and new ways of interacting with teachers in isolated rural areas. For educational administrators, on-line learning offers high quality and usually cost-effective professional development for teachers. It allows upgrading of skills, increased productivity and development of a new learning culture. At the same time, it means sharing of costs, of training time, increased portability of training, and the exchange of creativity, information, and dialogue.

  19. On-line Configuration of Network Emulator for Intelligent Energy System Testbed Applications

    DEFF Research Database (Denmark)

    Kemal, Mohammed Seifu; Iov, Florin; Olsen, Rasmus Løvenstein

    2015-01-01

    interface for visualizing, configuring and monitoring of the emulated scenarios and a network socket linking the graphic server and network emulation server on-line. Specifically, our focus area is to build a model that gives us ability to look at some of the challenges on implementing inter...... a mechanism for on-line configuration and monitoring of heterogeneous communication technologies implemented at smart energy system testbed of Aal-borg university. It proposes a model with three main components, a network emulator used to emulate the communication scenarios using KauNet, graphical user...

  20. On-line Peer Review in Teaching Design-oriented Courses

    Directory of Open Access Journals (Sweden)

    Hai Ning

    2004-02-01

    Full Text Available Peer review has been one of the very important designfacilitating processes practiced in education field, particularly in design-oriented courses such as MIT's 2.007 Robot Design. Typically students exchange ideas sketched on a piece of paper and critique on each other's design within a small team. We designed PREP web application backed up by a range of web services that handle the peer-review process on-line, and we argue that this is a significant step towards supporting designoriented course on-line. We believe that the lessons learned could be applied to other interested institutes that offer designoriented courses.

  1. A novel, optical, on-line bacteria sensor for monitoring drinking water quality

    DEFF Research Database (Denmark)

    Højris, Bo; Christensen, Sarah Christine Boesgaard; Albrechtsen, Hans-Jørgen

    2016-01-01

    Today, microbial drinking water quality is monitored through either time-consuming laboratory methods or indirect on-line measurements. Results are thus either delayed or insufficient to support proactive action. A novel, optical, on-line bacteria sensor with a 10-minute time resolution has been...... developed. The sensor is based on 3D image recognition, and the obtained pictures are analyzed with algorithms considering 59 quantified image parameters. The sensor counts individual suspended particles and classifies them as either bacteria or abiotic particles. The technology is capable of distinguishing...... conditions such as pollution events in drinking water....

  2. REMPI-TOFMS for on-line monitoring and controlling the coffee roasting process

    Science.gov (United States)

    Dorfner, Ralph; Ferge, Thomas; Yeretzian, Chahan; Zimmermann, Ralf; Kettrup, Antonius

    2001-08-01

    REMPI@266nm-TOFMS is used for on-line analysis of the coffee roasting process. Volatile and flavor active compounds of coffee were ionized by REMPI@266nm and monitored on-line and in real-time by TOFMS during the coffee roasting process. The phenol and 4-vinylguaiacol time-intensity profiles, for example, show typical behavior for different roasting temperatures and provide an indicator to the achieved degree of roasting. The impact of the moisture level of the green coffee beans on the time shift of a typical (commercial) roasting time, correlates with REMPI-TOFMS measurements and literature data.

  3. On-line monitoring of fermentation processes using multi-wavelength fluorescence

    DEFF Research Database (Denmark)

    Odman, Peter; Petersen, Nanna; Johansen, Claus Lindvald

    2007-01-01

    Fermentation processes often suffer from a lack of real-time methods for on-line determination of variables like the concentrations of nutrients and products. This work aims at investigating the possibilities of implementing an on-line fermentation monitoring system based on multi....... The model system considered in this work is the antibiotic production by Streptomyces coelicolor, a filamentous bacterium. In addition to predicting concentrations of biomass in the fermentation broth, the data allowed detection of different physiological states, i.e. growth phase and phosphate limitation...

  4. On-line catalogs of solar energetic protons at SRTI-BAS

    Science.gov (United States)

    Miteva, R.; Danov, D.

    2017-08-01

    We outline the status of the on-line catalogs of solar energetic particles supported by the Space Climate group at the Space Research and Technology, Bulgarian Academy of Sciences (SRTI-BAS). In addition to the already compiled proton catalog from Wind/EPACT instrument, in the current report we present preliminary results on the high energy SOHO/ERNE proton enhancement identifications as well as comparative analysis with two other proton lists. The future plans for the on-line catalogs are briefly summarized.

  5. Design of on line detection system for static evaporation rate of LNG vehicle cylinders

    Science.gov (United States)

    Tang, P.; Wang, M.; Tan, W. H.; Ling, Z. W.; Li, F.

    2017-06-01

    In order to solve the problems existing in the regular inspection of LNG vehicle cylinders, the static evaporation rate on line detection system of LNG cylinders is discussed in this paper. A non-disassembling, short-term and high-efficiency on line detection system for LNG vehicle cylinders is proposed, which can meet the requirement of evaporation rate test under different media and different test pressures. And then test methods under the experimental conditions, atmospheric pressure and pressure are given respectively. This online detection system designed in this paper can effectively solve the technical problems during the inspection of the cylinder.

  6. Process Identification in On-line Optimizing Control, an Application to a Heat Pump

    Directory of Open Access Journals (Sweden)

    Morten C. Svensson

    1996-10-01

    Full Text Available The objective of this paper is to focus on on-line state and parameter estimation in connection with on-line model-based optimizing control of continuous processes. A nonlinear programming approach is used to estimate unmeasured state variables and parameters in systems modelled by nonlinear differential-algebraic equations. The nonlinear dynamic model is discretized by orthogonal collocation on finite elements, and the moving-horizon approach is used to reduce the dimension of the final optimization problem.

  7. Reduction of the Influence of Laser Beam Directional Dithering in a Laser Triangulation Displacement Probe.

    Science.gov (United States)

    Yang, Hongwei; Tao, Wei; Zhang, Zhengqi; Zhao, Siwei; Yin, Xiaoqia; Zhao, Hui

    2017-05-15

    Directional dithering of a laser beam potentially limits the detection accuracy of a laser triangulation displacement probe. A theoretical analysis indicates that the measurement accuracy will linearly decrease as the laser dithering angle increases. To suppress laser dithering, a scheme for reduction of the influence of laser beam directional dithering in a laser triangulation displacement probe, which consists of a collimated red laser, a laser beam pointing control setup, a receiver lens, and a charge-coupled device, is proposed in this paper. The laser beam pointing control setup is inserted into the source laser beam and the measured object and can separate the source laser beam into two symmetrical laser beams. Hence, at the angle at which the source laser beam dithers, the positional averages of the two laser spots are equal and opposite. Moreover, a virtual linear function method is used to maintain a stable average of the positions of the two spots on the imaging side. Experimental results indicate that with laser beam pointing control, the estimated standard deviation of the fitting error decreases from 0.3531 mm to 0.0100 mm , the repeatability accuracy can be lowered from ±7 mm to ±5 μ m , and the nonlinear error can be reduced from ±6 % FS (full scale) to ±0.16 % FS.

  8. An on-line SPE-HPLC method for effective sample preconcentration and determination of fenoxycarb and cis, trans-permethrin in surface waters.

    Science.gov (United States)

    Šatínský, Dalibor; Naibrtová, Linda; Fernández-Ramos, Carolina; Solich, Petr

    2015-09-01

    A new on-line SPE-HPLC method using fused-core columns for on-line solid phase extraction and large volume sample injection for increasing the sensitivity of detection was developed for the determination of insecticides fenoxycarb and cis-, trans-permethrin in surface waters. The separation was carried out on fused-core column Phenyl-Hexyl (100×4.6 mm), particle size 2.7 µm with mobile phase acetonitrile:water in gradient mode at flow rate 1.0 mL min(-1), column temperature 45°C. Large volume sample injection (1500 µL) to the extraction dimension using short precolumn Ascentis Express RP C-18 (5×4.6 mm); fused-core particle size 2.7 µm allowed effective sample preconcentration and efficient ballast sample matrix removal. The washing mobile phase consisting of a mixture of acetonitrile:water; 30:70, (v/v) was pumped at flow rate of 0.5 mL min(-1) through the extraction precolumn to the waste. Time of the valve switch for transferring the preconcentrated sample zone from the extraction to the separation column was set at 3rd min. Elution of preconcentrated insecticides from the extraction precolumn and separation on the analytical column was performed in gradient mode. Linear gradient elution started from 40% of acetonitrile at time of valve switch from SPE column (3rd min) to 95% of acetonitrile at 7th min. Synthetic dye sudan I was chosen as an internal standard. UV detection at wavelength 225 nm was used and the method reached the limits of detection (LOD) at ng mL(-1) levels for both insecticides. The method showing on-line sample pretreatment and preconcentration with highly sensitive determination of insecticides was applied for monitoring of fenoxycarb and both permethrin isomers in different surface water samples in Czech Republic. The time of whole analysis including on-line extraction, interferences removal, chromatography separation and system equilibration was less than 8 min. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Sequential injection/bead injection lab-on-valve schemes for on-line solid phase extraction and preconcentration of ultra-trace levels of heavy metals with determination by ETAAS and ICPMS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald; Miró, Manuel

    2003-01-01

    are focused on the applications of SI-BI-LOV protocols for on-line microcolumn based solid phase extraction of ultra-trace levels of heavy metals, employing the so-called renewable surface separation and preconcentration manipulatory scheme. Two types of sorbents have been employed as packing material......This communication presents an overview of the state-of-the-art of the exploitation of sequential injection (SI)-bead injection (BI)-lab-on-valve (LOV) schemes for automatic on-line sample pre-treatments interfaced with ETAAS and ICPMS detection as conducted in the authors' group. The discussions...

  10. Laser photocoagulation - eye

    Science.gov (United States)

    Laser coagulation; Laser eye surgery; Photocoagulation; Laser photocoagulation - diabetic eye disease; Laser photocoagulation - diabetic retinopathy; Focal photocoagulation; Scatter (or pan retinal) photocoagulation; Proliferative ...

  11. Polymer solution phase separation: Microgravity simulation

    Science.gov (United States)

    Cerny, Lawrence C.; Sutter, James K.

    1989-01-01

    In many multicomponent systems, a transition from a single phase of uniform composition to a multiphase state with separated regions of different composition can be induced by changes in temperature and shear. The density difference between the phase and thermal and/or shear gradients within the system results in buoyancy driven convection. These differences affect kinetics of the phase separation if the system has a sufficiently low viscosity. This investigation presents more preliminary developments of a theoretical model in order to describe effects of the buoyancy driven convection in phase separation kinetics. Polymer solutions were employed as model systems because of the ease with which density differences can be systematically varied and because of the importance of phase separation in the processing and properties of polymeric materials. The results indicate that the kinetics of the phase separation can be performed viscometrically using laser light scattering as a principle means of following the process quantitatively. Isopycnic polymer solutions were used to determine the viscosity and density difference limits for polymer phase separation.

  12. Chromatographic hydrogen isotope separation

    Science.gov (United States)

    Aldridge, Frederick T.

    1981-01-01

    Intermetallic compounds with the CaCu.sub.5 type of crystal structure, particularly LaNiCo.sub.4 and CaNi.sub.5, exhibit high separation factors and fast equilibrium times and therefore are useful for packing a chromatographic hydrogen isotope separation colum. The addition of an inert metal to dilute the hydride improves performance of the column. A large scale mutli-stage chromatographic separation process run as a secondary process off a hydrogen feedstream from an industrial plant which uses large volumes of hydrogen can produce large quantities of heavy water at an effective cost for use in heavy water reactors.

  13. Rotary drum separator system

    Science.gov (United States)

    Barone, Michael R. (Inventor); Murdoch, Karen (Inventor); Scull, Timothy D. (Inventor); Fort, James H. (Inventor)

    2009-01-01

    A rotary phase separator system generally includes a step-shaped rotary drum separator (RDS) and a motor assembly. The aspect ratio of the stepped drum minimizes power for both the accumulating and pumping functions. The accumulator section of the RDS has a relatively small diameter to minimize power losses within an axial length to define significant volume for accumulation. The pumping section of the RDS has a larger diameter to increase pumping head but has a shorter axial length to minimize power losses. The motor assembly drives the RDS at a low speed for separating and accumulating and a higher speed for pumping.

  14. Natural gas large volumes measurement: going for on-line custody transfer; Medicao de grandes volumes de gas natural: rumo a transferencia de custodia on-line

    Energy Technology Data Exchange (ETDEWEB)

    Mercon, Eduardo G.; Frisoli, Caetano [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2005-07-01

    This paper describes the structure of the natural gas flow measurement process in TRANSPETRO, and comments features and performance of existing or under-implantation equipment and systems, reviewing best practices and technology in use. This process runs through three interrelated segments: data flow measurement, strictly speaking; data transfer and acquisition; and data flow measurement certification (data consolidation to invoice). Initially, the work makes an approach to the data flow measurement segment, evaluating technical features of flow meters, and describing configurations and functions of the operating gas flow computers in TRANSPETRO's custody transfer stations. In this part it will also be presented the implantation of TRANSPETRO's system for gas chromatography data input on-line to flow computers. Further, in data transfer and acquisition, SCADA system technical aspects will be evaluated, considering communications protocols and programmable logic controllers functions in remote terminal units, and discussing their places in the measurement process. Additionally, TRANSPETRO's experience in data measurement certification tools is in discussion, as well as new upcoming tools and their potential features, from what new practices will be suggested. Finally, all the work has been conceived and carried out always aiming to the state-of-the-art technology in gas flow measurement: on-line custody transfer. (author)

  15. On-line identification of hybrid systems using an adaptive growing and pruning RBF neural network

    DEFF Research Database (Denmark)

    Alizadeh, Tohid

    2008-01-01

    This paper introduces an adaptive growing and pruning radial basis function (GAP-RBF) neural network for on-line identification of hybrid systems. The main idea is to identify a global nonlinear model that can predict the continuous outputs of hybrid systems. In the proposed approach, GAP-RBF neu...

  16. Examining the Conditions of Using an On-Line Dictionary to Learn Words and Comprehend Texts

    Science.gov (United States)

    Dilenschneider, Robert Francis

    2018-01-01

    This study investigated three look-up conditions for language learners to learn unknown target words and comprehend a reading passage when their attention is transferred away to an on-line dictionary. The research questions focused on how each look-up condition impacted the recall and recognition of word forms, word meanings, and passage…

  17. Theory of reliable systems. [reliability analysis and on-line fault diagnosis

    Science.gov (United States)

    Meyer, J. F.

    1974-01-01

    Research is reported in the program to refine the current notion of system reliability by identifying and investigating attributes of a system which are important to reliability considerations, and to develop techniques which facilitate analysis of system reliability. Reliability analysis, and on-line fault diagnosis are discussed.

  18. Controlling maximum evaluation duration in on-line and on-board evolutionary robotics

    NARCIS (Netherlands)

    Atta-ul-Qayyum, A.; Nedev, D.G.; Haasdijk, E.W.

    2014-01-01

    On-line evolution of robot controllers allows robots to adapt while they perform their proper tasks. In our investigations, robots contain their own self-sufficient evolutionary algorithm (known as the encapsulated approach) where individual solutions are evaluated by means of a time sharing scheme:

  19. SAFARI, an On-Line Text-Processing System User's Manual.

    Science.gov (United States)

    Chapin, P.G.; And Others.

    This report describes for the potential user a set of procedures for processing textual materials on-line. In this preliminary model an information analyst can scan through messages, reports, and other documents on a display scope and select relevant facts, which are processed linguistically and then stored in the computer in the form of logical…

  20. CERN HR receives award for on-line recruitment and communication

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    In a survey of 21,000 European students, CERN ranked 15th, ahead of giants like Microsoft and Nestlé, for the quality of its on-line "talent communication", that is how it uses the Internet to attract job applicants. HR now boasts a new virtual award, certifying its on-line savvy.   The "virtual" award given to HR. How did you get your job at CERN? Via the CERN HR website, or Facebook, or Twitter? Or were you headhunted on LinkedIn? Particularly if you’re from the younger generation, chances are that you used some form of on-line recruitment. In this case you will have used one of the best recruitment tools in Europe, according to the 2012 OTaC (Online Talent Communication) study, carried out by a research institute named Potentialpark. It surveyed over 21,000 students, asking them to rate employers’ use of seven different channels of communication about jobs and careers, from HR websites and on-line application systems to the...