WorldWideScience

Sample records for self-propelled mobile offshore

  1. Perancangan Propeler Self-Propelled Barge

    Directory of Open Access Journals (Sweden)

    Billy Teguh kurniawan

    2013-03-01

    Full Text Available Makalah ini menyampaikan suatu penelitian tentang perancangan propeler yang optimal beserta pemilihan daya mesin yang efisien pada self-propelled barge dengan memperhitungkan besarnya nilai tahanan dari barge tersebut. Dengan penambahan sistem propulsi, diharapkan barge dapat beroperasi dengan lebih efisien dibandingkan saat barge beroperasi menggunakan sistem towing atau ditarik tug boat. Perhitungan tahanan barge dilakukan menggunakan metode Holtrop dan Guldhammer-Harvald sehingga dapat diperhi-tungkan geometri dan jenis propeler yang optimal beserta daya mesin yang efisien untuk barge. Propeler yang dianalisis adalah propeler tipe B-Troost Series, sedangkan variasi yang dilakukan untuk perencanaan propeler pada kajian ini adalah variasi putaran propeler pada rentang antara 310-800 rpm, serta variasi jumlah daun pada rentang tiga, empat, lima, dan enam. Besarnya nilai tahanan self-propelled barge untuk metode Holtrop adalah 105.91 kilonewton, sedangkan hasil per-hitungan dari metode Guldhammer-Harvald didapatkan nilai sebesar 109.14 kilonewton. Tipe propeler yang dipilih setelah dilakukan uji kavitasi adalah tipe Troost Series B4-40, dengan diameter sebesar 2.1 m, efisiensi sebesar 0.421, pitch ratio se-besar 0.591, dengan putaran propeler 400 rpm. Daya mesin yg dibutuhkan barge pada kondisi maksimum (BHPMCR sebesar 1669.5 HP. Dengan mempertimbangkan daya tersebut, maka dipilih mesin jenis Caterpillar tipe Marine 3516B yang mem-punyai daya maksimum sebesar 1285 kilowatt atau 1722.5 horsepower dengan putaran mesin sebesar 1200 rpm

  2. 46 CFR 15.520 - Mobile offshore drilling units.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Mobile offshore drilling units. 15.520 Section 15.520... REQUIREMENTS Manning Requirements; Inspected Vessels § 15.520 Mobile offshore drilling units. (a) The requirements in this section for mobile offshore drilling units (MODUs) supplement other requirements in this...

  3. DESAIN SELF-PROPELLED CAR BARGE UNTUK DISTRIBUSI MOBIL BARU RUTE CIKARANG BEKASI LAUT (CBL – TANJUNG PERAK

    Directory of Open Access Journals (Sweden)

    Bintang Jiwa Jiwa

    2017-01-01

    Full Text Available Berbagai upaya telah dilakukan Pemerintah untuk dapat mengurangi kemacetan jalur Pantura. Mulai dari pemberian jalur alternatif, pelebaran jalan, hingga pembuatan jalan tol baru. Segala upaya tersebut tidak sebanding dengan jumlah kendaraan yang terus meningkat melewati jalur Pantura, khususnya kendaraan-kendaraan barang seperti truk dan kontainer. Hal ini tidak terlepas dari geliat perekonomian yang terus tumbuh. Kawasan industri otomotif di sekitar Cikarang dan Bekasi salah satu contohnya. Jumlah produksi mobil domestik dan permintaan yang terus meningkat ini membutuhkan sarana yang baik dan cepat dalam mendistribusikan mobil baru ke berbagai daerah. Dalam beberapa tahun ini, Jawa Timur merupakan provinsi dengan tingkat permintaan mobil yang cukup tinggi di Indonesia. Oleh karena itu, salah satu solusi yang ditawarkan untuk dapat mengurangi kemacetan di jalur darat adalah berupa pengalihan transportasi darat ke sungai atau laut. Berdasarkan solusi tersebut, maka dibutuhkan alat transportasi pengangkut barang, dalam hal ini mobil, yang dapat melewati sungai dan laut. Self-propelled car barge diharapkan mampu menjadi inovasi yang cukup baik dalam mendistribusikan barang melalui rute Sungai Cikarang Bekasi Laut (CBL menuju ke Pelabuhan Tanjung Perak. Untuk mendapatkan ukuran utama yang optimum digunakan metode optimation design approach dengan bantuan fitur solver pada program Microsoft Excel dengan menjadikan biaya pembangunan paling minimum sebagai fungsi objektif, serta adanya batasan-batasan dari persyaratan teknis dan regulasi yang ada. Dari proses optimisasi, didapatkan ukuran utama optimum Self-Propelled Car Barge adalah L=53.10 m, B=15.17 m, TFW=3.09 m, TSW=3.02 m, dan H=4.66 m, dengan estimasi biaya pembangunan sebesar $1.435.270,56 atau setara Rp.19.281.424.757,10.

  4. 46 CFR 111.105-33 - Mobile offshore drilling units.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Mobile offshore drilling units. 111.105-33 Section 111... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-33 Mobile offshore drilling units. (a) Applicability. This section applies to each mobile offshore drilling unit. (b) Definitions. As used in this...

  5. Indoor Surveillance Security Robot with a Self-Propelled Patrolling Vehicle

    Directory of Open Access Journals (Sweden)

    Hou-Tsan Lee

    2011-01-01

    Full Text Available Self-propelled patrolling vehicles can patrol periodically in the designed area to ensure the safety like men do. The proposed vehicle cannot only save manpower, but also ensure the performance without mistakes caused by man. It is different from the traditional patrolling system which is limited by the manpower and the fixed camera positions. To improve such situation, this paper proposes a self-propelled patrolling vehicle which can move automatically to a wider range and record the monitored image by IPCAM within a predefined patrolling route. Besides, the user can use the mobile device or website to connect to the vehicle at anytime and anywhere and control it to move to the position to get the indoor image user wants. The position of self-propelled vehicles can be detected by the RFID reader as a feedback and be shown on the PC screen and smart phone. The recorded images can be also transmitted back to the server via WiFi system for face tracking and discriminating analysis. On the other hand, the self-propelled vehicle patrolling routes can be modified by the Android smart-phone remote-control module. When some defined events occur, the build-in MSN module will notice users by sending messages to PC and smart phone. Experimental results are given in the paper to validate its performance.

  6. 46 CFR 11.468 - Officer endorsements for mobile offshore drilling units.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Officer endorsements for mobile offshore drilling units... Officer endorsements for mobile offshore drilling units. Officer endorsements for service on mobile offshore drilling units (MODUs) authorize service on units of any gross tons upon ocean waters while on...

  7. 77 FR 71607 - Mobile Offshore Drilling Unit (MODU) Electrical Equipment Certification Guidance

    Science.gov (United States)

    2012-12-03

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-0839] Mobile Offshore Drilling... hazardous areas on foreign-flagged Mobile Offshore Drilling Units (MODUs) that have never operated, but... International Maritime Organization (IMO) Code for the Construction and Equipment of Mobile Offshore Drilling...

  8. 76 FR 39885 - Risk-Based Targeting of Foreign Flagged Mobile Offshore Drilling Units (MODUs)

    Science.gov (United States)

    2011-07-07

    ... Foreign Flagged Mobile Offshore Drilling Units (MODUs) AGENCY: Coast Guard, DHS. ACTION: Notice of... 11-06, Risk-Based Targeting of Foreign Flagged Mobile Offshore Drilling Units (MODUs). This policy... applicable regulations, every foreign-flagged mobile offshore drilling unit (MODU) must undergo a Coast Guard...

  9. Self-propelled oil droplets consuming "fuel" surfactant

    DEFF Research Database (Denmark)

    Toyota, Taro; Maru, Naoto; Hanczyc, Martin M

    2009-01-01

    A micrometer-sized oil droplet of 4-octylaniline containing 5 mol % of an amphiphilic catalyst exhibited a self-propelled motion, producing tiny oil droplets, in an aqueous dispersion of an amphiphilic precursor of 4-octylaniline. The tiny droplets on the surface of the self-propelled droplet wer...

  10. 46 CFR 2.10-130 - Fees for examination of foreign mobile offshore drilling units.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Fees for examination of foreign mobile offshore drilling... drilling units. Each foreign mobile offshore drilling unit must pay: (a) For examination for the issuance... Equipment of Mobile Offshore Drilling Units, a fee of $1,830. (b) For examination for the issuance of a...

  11. 77 FR 62247 - Dynamic Positioning Operations Guidance for Vessels Other Than Mobile Offshore Drilling Units...

    Science.gov (United States)

    2012-10-12

    ... Operations Guidance for Vessels Other Than Mobile Offshore Drilling Units Operating on the U.S. Outer... ``Mobile Offshore Drilling Unit Dynamic Positioning Guidance''. The notice recommended owners and operators of Mobile Offshore Drilling Units (MODUs) follow Marine Technology Society (MTS) Dynamic Positioning...

  12. 46 CFR 11.540 - Endorsements for engineers of mobile offshore drilling units.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Endorsements for engineers of mobile offshore drilling units. 11.540 Section 11.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE... § 11.540 Endorsements for engineers of mobile offshore drilling units. Endorsements as chief engineer...

  13. Self-regulation in self-propelled nematic fluids.

    Science.gov (United States)

    Baskaran, A; Marchetti, M C

    2012-09-01

    We consider the hydrodynamic theory of an active fluid of self-propelled particles with nematic aligning interactions. This class of materials has polar symmetry at the microscopic level, but forms macrostates of nematic symmetry. We highlight three key features of the dynamics. First, as in polar active fluids, the control parameter for the order-disorder transition, namely the density, is dynamically convected by the order parameter via active currents. The resulting dynamical self-regulation of the order parameter is a generic property of active fluids and destabilizes the uniform nematic state near the mean-field transition. Secondly, curvature-driven currents render the system unstable deep in the nematic state, as found previously. Finally, and unique to self-propelled nematics, nematic order induces local polar order that in turn leads to the growth of density fluctuations. We propose this as a possible mechanism for the smectic order of polar clusters seen in numerical simulations.

  14. Atmospheric surveillance self-propelling device

    International Nuclear Information System (INIS)

    Cartoux, Gerard.

    1980-11-01

    The atmospheric surveillance self-propelling device of the Saclay Nuclear Research Center can, by its conception (autonomy, rapid put into service, multiplicity of sampling and measurements), be used for all kind of measuring campains: pollution radioactive or not, routine or accidental situation, technical and logistic support and as a coordination or investigation vehicle [fr

  15. Self-Propelled Micromotors for Cleaning Polluted Water

    Science.gov (United States)

    2013-01-01

    We describe the use of catalytically self-propelled microjets (dubbed micromotors) for degrading organic pollutants in water via the Fenton oxidation process. The tubular micromotors are composed of rolled-up functional nanomembranes consisting of Fe/Pt bilayers. The micromotors contain double functionality within their architecture, i.e., the inner Pt for the self-propulsion and the outer Fe for the in situ generation of ferrous ions boosting the remediation of contaminated water.The degradation of organic pollutants takes place in the presence of hydrogen peroxide, which acts as a reagent for the Fenton reaction and as main fuel to propel the micromotors. Factors influencing the efficiency of the Fenton oxidation process, including thickness of the Fe layer, pH, and concentration of hydrogen peroxide, are investigated. The ability of these catalytically self-propelled micromotors to improve intermixing in liquids results in the removal of organic pollutants ca. 12 times faster than when the Fenton oxidation process is carried out without catalytically active micromotors. The enhanced reaction–diffusion provided by micromotors has been theoretically modeled. The synergy between the internal and external functionalities of the micromotors, without the need of further functionalization, results into an enhanced degradation of nonbiodegradable and dangerous organic pollutants at small-scale environments and holds considerable promise for the remediation of contaminated water. PMID:24180623

  16. Kinematic matrix theory and universalities in self-propellers and active swimmers.

    Science.gov (United States)

    Nourhani, Amir; Lammert, Paul E; Borhan, Ali; Crespi, Vincent H

    2014-06-01

    We describe an efficient and parsimonious matrix-based theory for studying the ensemble behavior of self-propellers and active swimmers, such as nanomotors or motile bacteria, that are typically studied by differential-equation-based Langevin or Fokker-Planck formalisms. The kinematic effects for elementary processes of motion are incorporated into a matrix, called the "kinematrix," from which we immediately obtain correlators and the mean and variance of angular and position variables (and thus effective diffusivity) by simple matrix algebra. The kinematrix formalism enables us recast the behaviors of a diverse range of self-propellers into a unified form, revealing universalities in their ensemble behavior in terms of new emergent time scales. Active fluctuations and hydrodynamic interactions can be expressed as an additive composition of separate self-propellers.

  17. 30 CFR 56.4230 - Self-propelled equipment.

    Science.gov (United States)

    2010-07-01

    ....4230 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control Firefighting Equipment § 56.4230 Self-propelled equipment. (a)(1) Whenever a fire or its effects...

  18. Rational design and dynamics of self-propelled colloidal bead chains: from rotators to flagella

    NARCIS (Netherlands)

    Vutukuri, Hanumantha Rao|info:eu-repo/dai/nl/304838926; Bet, Bram|info:eu-repo/dai/nl/370530667; van Roij, Rene|info:eu-repo/dai/nl/152978984; Dijkstra, Marjolein|info:eu-repo/dai/nl/123538807; Huck, Wilhelm T S

    2017-01-01

    The quest for designing new self-propelled colloids is fuelled by the demand for simple experimental models to study the collective behaviour of their more complex natural counterparts. Most synthetic self-propelled particles move by converting the input energy into translational motion. In this

  19. Active matter in silico : phase behaviour of attractive, repulsive and anisotropic self-propelled particles

    NARCIS (Netherlands)

    Prymidis, V.

    2017-01-01

    In this thesis we study emergent statistical properties of many-particle systems of self-propelled particles using computer simulations. Ensembles of self-propelled particles belong to the class of physical systems labeled active matter, a term that refers to systems whose individual components are

  20. Rational design and dynamics of self-propelled colloidal bead chains: from rotators to flagella.

    Science.gov (United States)

    Vutukuri, Hanumantha Rao; Bet, Bram; van Roij, René; Dijkstra, Marjolein; Huck, Wilhelm T S

    2017-12-01

    The quest for designing new self-propelled colloids is fuelled by the demand for simple experimental models to study the collective behaviour of their more complex natural counterparts. Most synthetic self-propelled particles move by converting the input energy into translational motion. In this work we address the question if simple self-propelled spheres can assemble into more complex structures that exhibit rotational motion, possibly coupled with translational motion as in flagella. We exploit a combination of induced dipolar interactions and a bonding step to create permanent linear bead chains, composed of self-propelled Janus spheres, with a well-controlled internal structure. Next, we study how flexibility between individual swimmers in a chain can affect its swimming behaviour. Permanent rigid chains showed only active rotational or spinning motion, whereas longer semi-flexible chains showed both translational and rotational motion resembling flagella like-motion, in the presence of the fuel. Moreover, we are able to reproduce our experimental results using numerical calculations with a minimal model, which includes full hydrodynamic interactions with the fluid. Our method is general and opens a new way to design novel self-propelled colloids with complex swimming behaviours, using different complex starting building blocks in combination with the flexibility between them.

  1. Driving dynamic colloidal assembly using eccentric self-propelled colloids

    OpenAIRE

    Ma, Zhan; Lei, Qun-li; Ni, Ran

    2017-01-01

    Designing protocols to dynamically direct the self-assembly of colloidal particles has become an important direction in soft matter physics because of the promising applications in fabrication of dynamic responsive functional materials. Here using computer simulations, we found that in the mixture of passive colloids and eccentric self-propelled active particles, when the eccentricity and self-propulsion of active particles are high enough, the eccentric active particles can push passive coll...

  2. 30 CFR 57.4230 - Surface self-propelled equipment.

    Science.gov (United States)

    2010-07-01

    ... Section 57.4230 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire... fire or its effects could impede escape from self-propelled equipment, a fire extinguisher shall be on...

  3. Self-propelled heaving and pitching flexible fin in a quiescent flow

    International Nuclear Information System (INIS)

    Kim, Boyoung; Park, Sung Goon; Huang, Weixi; Sung, Hyung Jin

    2016-01-01

    Highlights: • A self-propelled flexible fin with heaving and pitching motions in a quiescent flow has been simulated by using the penalty immersed boundary method. • The cruising speed and the swimming efficiency of the self-propelled fin were determined as functions of the bending coefficient (γ), the heaving amplitude (A_h). • We optimized the cruising speed and the swimming efficiency with respect to γ, f, A_h, A_p, and Δϕ. - Abstract: A self-propelled flexible fin with heaving and pitching motions in a quiescent flow has been simulated by using the penalty immersed boundary method. The flexible fin can move freely in the horizontal direction and the body of the flexible fin moves passively along with the active head motion. The position of the head of the fin was described as a harmonic heaving oscillation in the vertical direction, while the inclination angle of the head was prescribed as a harmonic oscillation with a moving clamped condition for the heaving and pitching fin. The cruising speed and the swimming efficiency of the self-propelled fin were determined as functions of the bending stiffness (γ), the heaving amplitude (A_h), the pitching amplitude (A_p), the flapping frequency (f) and the phase difference (Δϕ) between A_h and A_p. We optimized the cruising speed and the swimming efficiency with respect to γ, f, A_h, A_p and Δϕ. For a certain range of A_p, the swimming efficiency of the heaving and pitching fin is larger than that of a heaving-only fin.

  4. Self-propelled nanotools drilling into cells and tissues

    International Nuclear Information System (INIS)

    Sanchez, Samuel; Xi, Wang; Solovev, Alexander; Schmidt, Oliver

    2013-01-01

    We designed nanoscale tools in the form of autonomous and remotely guided catalytically and magnetically self-propelled micro- and nanotools. Asymmetrically rolled-up nanotools move in a corkscrewlike trajectory, allowing these tiny tubes to drill and embed themselves into biomaterials (fixed HeLa cells and tissues). First, we designed the smallest self-propelled nanojet engine (InGaAs/GaAs/(Cr)Pt) with diameters in the range of 280-600 nm, which move in hydrogen peroxide solutions with speeds as high as 180 μm.s -1 and perform advanced tasks such as drilling into cancer cells. Also, we demonstrated that tubular fuelfree Ti/Cr/Fe micro-drillers containing sharp tips can be applied for mechanical drilling operations of porcine liver tissue ex vivo. An external rotational magnetic field is used to remotely locate and actuate the micro-drillers in a solution with a viscosity comparable to that of biological fluids (e.g., blood). (authors)

  5. Risk assessment during operating self-propelled lifting jib cranes in conditions of insufficient information

    Directory of Open Access Journals (Sweden)

    Lagerev A.V.

    2017-06-01

    Full Text Available Presents the results of statistical analyses identified by the expert diagnostics of defects of the self-propelled lifting jib cranes, spent a normative term of exploitation. The greatest number of defects associated with the destruction and dete-rioration of structural elements, the occurrence of fatigue cracks and a violation of the conditions of operation of the equipment. The greatest number of defects occurs in the hydraulic system of cranes, the rope-block system, and rarely in steel structures. To conduct risk analysis of self-propelled jib cranes in case of insufficient information, proposed the method of expert estimations. It allows to assess the impact of potential defects on self-propelled jib cranes on the value of the economic damage of the crane and moving cargo and the value of the traumatic exposure on men. The proposed list of possible defects self-propelled lifting jib cranes and a checklist of questions about the degree of influence of these defects. Proposed calculated dependences to the approximate calculation of the magnitude of technical risk in the opera-tion of self-propelled jib cranes. The results of statistical analysis of expert estimations for each possible defect and per-formed their ranking in terms of impact on the magnitude of the economic damage of the crane and moving loads, the value of the traumatic exposure. Was calculated the value of technical risk for the surveyed taps.

  6. Inverse Leidenfrost effect: self-propelling drops on a bath

    Science.gov (United States)

    Gauthier, Anais; van der Meer, Devaraj; Lohse, Detlef; Physics of Fluids Team

    2017-11-01

    When deposited on very hot solid, volatile drops can levitate over a cushion of vapor, in the so-called Leidenfrost state. This phenomenon can also be observed on a hot bath and similarly to the solid case, drops are very mobile due to the absence of contact with the substrate that sustains them. We discuss here a situation of ``inverse Leidenfrost effect'' where room-temperature drops levitate on a liquid nitrogen pool - the vapor is generated here by the bath sustaining the relatively hot drop. We show that the drop's movement is not random: the liquid goes across the bath in straight lines, a pattern only disrupted by elastic bouncing on the edges. In addition, the drops are initially self-propelled; first at rest, they accelerate for a few seconds and reach velocities of the order of a few cm/s, before slowing down. We investigate experimentally the parameters that affect their successive acceleration and deceleration, such as the size and nature of the drops and we discuss the origin of this pattern.

  7. Intuitive control of self-propelled microjets with haptic feedback

    NARCIS (Netherlands)

    Pacchierotti, Claudio; Magdanz, V.; Medina-Sanchez, M.; Schmidt, O.G.; Prattichizzo, D.; Misra, Sarthak

    2015-01-01

    Self-propelled microrobots have recently shown promising results in several scenarios at the microscale, such as targeted drug delivery and micromanipulation of cells. However, none of the steering systems available in the literature enable humans to intuitively and effectively control these

  8. 33 CFR 96.370 - What are the requirements for vessels of countries not party to Chapter IX of SOLAS?

    Science.gov (United States)

    2010-07-01

    ... vessel, or self-propelled mobile offshore drilling unit of 500 gross tons or more, operated in U.S... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS How Will Safety Management Systems Be Certificated and...

  9. Self-propelled pulse X-ray apparatus Sirena-1

    International Nuclear Information System (INIS)

    Danil'chenko, N.T.; Ershov, L.S.; Il'chenko, A.V.; Krasil'nikov, S.B.; Kristalinskij, A.L.; Lozovoj, L.N.; Markov, S.N.; Morgovskij, L.Ya.

    1984-01-01

    The structure and specifications of a self-propelled pulse X-ray apparatus ''Sirena-1'' for testing oilt and gas pipelines welded joints are described. The apparatus is designed on the base of pulse X-ray apparatus MIRA. Apparatus control is realized by means of the 137 Cs source or manual control desk. The apparatus ensures perfect control sensitivity

  10. From MIPS to Vicsek: A comprehensive phase diagram for self-propelled rods

    Science.gov (United States)

    Shi, Xiaqing

    Self-propelled rods interacting by volume exclusion is one of the simplest active matter systems. Despite years of effort, no comprehensive picture of their phase diagram is available. Furthermore, results on explicit rods are so far largely disconnected from those obtained on the relatively better understood cases of motility induced phase separation (MIPS) of (usually) isotropic active particles, and from our current knowledge of Vicsek-style aligning point particles. In this talk, I will present a complete phase diagram of a generic model of self-propelled rods and show how it is connected to both MIPS and Vicsek worlds.

  11. Self-propelled supramolecular nanomotors with temperature-responsive speed regulation

    NARCIS (Netherlands)

    Tu, Y.; Peng, F.; Sui, X.; Men, Y.; White, P.B.; van Hest, J.C.M.; Wilson, D.A.

    2016-01-01

    Self-propelled catalytic micro- and nanomotors have been the subject of intense study over the past few years, but it remains a continuing challenge to build in an effective speed-regulation mechanism. Movement of these motors is generally fully dependent on the concentration of accessible fuel,

  12. Design of self-contained sensor for monitoring of deep-sea offshore platform

    Science.gov (United States)

    Song, Yang; Yu, Yan; Zhang, Chunwei; Dong, Weijie; Ou, Jinping

    2013-04-01

    Offshore platform, which is the base of the production and living in the sea, is the most important infrastructure for developing oil and gas resources. At present, there are almost 6500 offshore platforms servicing in the 53 countries' sea areas around the world, creating great wealth for the world. In general, offshore platforms may work for 20 years, however, offshore platforms are expensive, complex, bulky, and so many of them are on extended active duty. Because of offshore platforms servicing in the harsh marine environment for a long time, the marine environment have a great impact on the offshore platforms. Besides, with the impact and erosion of seawater, and material aging, the offshore platform is possible to be in unexpected situations when a badly sudden situation happens. Therefore, it is of great significance to monitor the marine environment and offshore platforms. The self-contained sensor for deep-sea offshore platform with its unique design, can not only effectively extend the working time of the sensor with the capability of converting vibration energy to electrical energy, but also simultaneously collect the data of acceleration, inclination, temperature and humidity of the deep sea, so that we can achieve the purpose of monitoring offshore platforms through analyzing the collected data. The self-contained sensor for monitoring of deep-sea offshore platform includes sensing unit, data collecting and storage unit, the energy supply unit. The sensing unit with multi-variables, consists of an accelerometer LIS344ALH, an inclinometer SCA103T and a temperature and humidity sensor SHT11; the data collecting and storage unit includes the MSP430 low-power MCU, large capacity memory, clock circuit and the communication interface, the communication interface includes USB interface, serial ports and wireless interface; in addition, the energy supply unit, converting vibration to electrical energy to power the overall system, includes the electromagnetic

  13. Nano and micro architectures for self-propelled motors

    International Nuclear Information System (INIS)

    Parmar, Jemish; Ma, Xing; Katuri, Jaideep; Simmchen, Juliane; Stanton, Morgan M; Trichet-Paredes, Carolina; Soler, Lluís; Sanchez, Samuel

    2015-01-01

    Self-propelled micromotors are emerging as important tools that help us understand the fundamentals of motion at the microscale and the nanoscale. Development of the motors for various biomedical and environmental applications is being pursued. Multiple fabrication methods can be used to construct the geometries of different sizes of motors. Here, we present an overview of appropriate methods of fabrication according to both size and shape requirements and the concept of guiding the catalytic motors within the confines of wall. Micromotors have also been incorporated with biological systems for a new type of fabrication method for bioinspired hybrid motors using three-dimensional (3D) printing technology. The 3D printed hybrid and bioinspired motors can be propelled by using ultrasound or live cells, offering a more biocompatible approach when compared to traditional catalytic motors. (focus issue paper)

  14. Hydrodynamics of a three-dimensional self-propelled flexible plate

    Science.gov (United States)

    Ryu, Jaeha; Sung, Hyung Jin

    2017-11-01

    A three-dimensional self-propelled flexible plate in a quiescent flow was simulated using the immersed boundary method. The clamped leading edge of the flexible plate was forced into a vertical oscillation, while free to move horizontally. To reveal the hydrodynamics of the plate, the averaged cruising speed (UC) , the input power (P) , and the swimming efficiency (η) were analyzed as a function of the bending rigidity (γ) and the flapping frequency (f) . The velocity field around the plate and the exerted force on the plate were demonstrated to find out the dynamic interaction between the plate and the surrounding fluid. The kinematics of the plate, the maximum angle of attack (ϕmax) , and the mean effective length (Leff) were examined accounting for the hydrodynamics of the self-propelled flexible plate. The vortical structures around the plate were visualized, and the influence of the tip vortex on the swimming efficiency was explored qualitatively and quantitatively. This work was supported by the Creative Research Initiatives (No. 2017-013369) program of the National Research Foundation of Korea (MSIP).

  15. Self-propelled motion in a viscous compressible fluid

    Czech Academy of Sciences Publication Activity Database

    Mácha, Václav; Nečasová, Šárka

    2016-01-01

    Roč. 146, č. 2 (2016), s. 415-433 ISSN 0308-2105 R&D Projects: GA ČR(CZ) GAP201/11/1304; GA ČR GA13-00522S Institutional support: RVO:67985840 Keywords : self-propelled motion * compressible fluid * deformable structure Subject RIV: BA - General Mathematics Impact factor: 1.158, year: 2016 http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=10065194&fileId=S0308210515000487

  16. Hull-Propeller Interaction and Its Effect on Propeller Cavitation

    DEFF Research Database (Denmark)

    Regener, Pelle Bo

    In order to predict the required propulsion power for a ship reliably and accurately, it is not sufficient to only evaluate the resistance of the hull and the propeller performance in open water alone. Interaction effects between hull and propeller can even be a decisive factor in ship powering...... prediction and design optimization. The hull-propeller interaction coefficients of effective wake fraction, thrust deduction factor, and relative rotative efficiency are traditionally determined by model tests. Self-propulsion model tests consistently show an increase in effective wake fractions when using...... velocities. This offers an opportunity for additional insight into hull-propeller interaction and the propeller’s actual operating condition behind the ship, as the actual (effective) inflow is computed. Self-propulsion simulations at model and full scale were carried out for a bulk carrier, once...

  17. Collective behaviour of self-propelling particles with conservative kinematic constraints

    NARCIS (Netherlands)

    Ratushna, Valeriya Igorivna

    2007-01-01

    In this thesis I considered the dynamics of self-propelling particles (SPP). Flocking of living organisms like birds, fishes, ants, bacteria etc. is an area where the theory of the collective behaviour of SPP can be applied. One can often see how these animals develop coherent motion, amazing the

  18. Research on and Design of a Self-Propelled Nozzle for the Tree-Type Drilling Technique in Underground Coal Mines

    Directory of Open Access Journals (Sweden)

    Yiyu Lu

    2015-12-01

    Full Text Available Due to the increasing depths of coal mines and the low permeability of some coal seams, conventional methods of gas drainage in underground mines are facing many problems. To improve gas extraction, a new technique using water jets to drill tree-type boreholes in coal seams is proposed. A self-propelled water-jet drilling nozzle was designed to drill these boreholes. The configuration of the self-propelled nozzle was optimized by conducting drilling experiments and self-propelling force measurements. Experimental results show that the optimal self-propelled nozzle has a forward orifice axial angle at 25°, a radial angle at 90°, a center distance of 1.5 mm, and backward pointing orifices with an axial angle of 25°. The self-propelling force generated by the jets of the nozzle with 30 MPa pump pressure can reach 29.8 N, enough to pull the hose and the nozzle forward without any external forces. The nozzle can drill at speeds up to 41.5 m/h with pump pressures at 30 MPa. The radial angles of the forward orifices improve the rock breaking performance of the nozzle and, with the correct angle, the rock breaking area of the orifices overlap to produce a connecting hole. The diameter of boreholes drilled by this nozzle can reach 35.2 mm. The nozzle design can be used as the basis for designing other self-propelled nozzles. The drilling experiments demonstrate the feasibility of using the tree-type drilling technique in underground mines.

  19. Multiple-division of self-propelled oil droplets through acetal formation.

    Science.gov (United States)

    Banno, Taisuke; Kuroha, Rie; Miura, Shingo; Toyota, Taro

    2015-02-28

    We demonstrate a novel system that exhibits both self-propelled motion and division of micrometer-sized oil droplets induced by chemical conversion of the system components. Such unique dynamics were observed in an oil-in-water emulsion of a benzaldehyde derivative, an alkanol and a cationic surfactant at a low pH.

  20. Fluctuations and pattern formation in self-propelled particles.

    Science.gov (United States)

    Mishra, Shradha; Baskaran, Aparna; Marchetti, M Cristina

    2010-06-01

    We consider a coarse-grained description of a collection of self-propelled particles given by hydrodynamic equations for the density and polarization fields. We find that the ordered moving or flocking state of the system is unstable to spatial fluctuations beyond a threshold set by the self-propulsion velocity of the individual units. In this region, the system organizes itself into an inhomogeneous state of well-defined propagating stripes of flocking particles interspersed with low-density disordered regions. Further, we find that even in the regime where the homogeneous flocking state is stable, the system exhibits large fluctuations in both density and orientational order. We study the hydrodynamic equations analytically and numerically to characterize both regimes.

  1. Review of ExxonMobil Canada's 2008 offshore environmental effects monitoring report

    Energy Technology Data Exchange (ETDEWEB)

    Cogswell, A.; Kenchington, E.; Kennedy, E.; Law, B.; Lee, K.; Tremblay, J.; Worcester, T. [Department of Fisheries and Oceans Canada, Dartmouth, NS (Canada). Maritimes Science; Courtenay, S. [Department of Fisheries and Oceans Canada, Moncton, NB (Canada). Gulf Science; Payne, J. [Department of Fisheries and Oceans Canada, St. John' s, NL (Canada). Newfoundland and Labrador Science

    2009-07-15

    The environmental effects monitoring (EEM) program for the Sable Offshore Energy Project (SOEP) was designed to evaluate predictions made during its environmental assessment (EA) process. The Oceans, Habitat, and Species at Risk Branch of the Department of Fisheries and Oceans Canada was asked to review ExxonMobil Canada Properties Inc.'s 2008 annual report regarding the EEM for this offshore project. This report reviewed the monitoring results for benthic habitat and fish density; produced water chemistry and toxicity; and mussel hydrocarbon body burden. This report revealed that SOEP's 2008 EEM was consistent with previous reports, but that the monitoring methods used were not particularly meaningful, particularly since they failed to address fish health and fish quality issues. 3 refs.

  2. Self-Propelled Soft Protein Microtubes with a Pt Nanoparticle Interior Surface.

    Science.gov (United States)

    Kobayakawa, Satoshi; Nakai, Yoko; Akiyama, Motofusa; Komatsu, Teruyuki

    2017-04-11

    Human serum albumin (HSA) microtubes with an interior surface composed of Pt nanoparticles (PtNPs) are self-propelled in aqueous H 2 O 2 medium. They can capture cyanine dye and Escherichia coli (E. coli) efficiently. Microtubes were prepared by wet templating synthesis by using a track-etched polycarbonate (PC) membrane with alternate filtrations of aqueous HSA, poly-l-arginine (PLA), and citrate-PtNPs. Subsequent dissolution of the PC template yielded uniform hollow cylinders made of (PLA/HSA) 8 PLA/PtNP stacking layers (1.16±0.02 μm outer diameter, ca. 23 μm length). In aqueous H 2 O 2 media, the soft protein microtubes are self-propelled by jetting O 2 bubbles from the open-end terminus. The effects of H 2 O 2 and surfactant concentrations on the velocity were investigated. The swimming microtube captured cyanine dye in the HSA component of the wall. Addition of an intermediate γ-Fe 3 O 4 layer allowed manipulation of the direction of movement of the tubule by using a magnetic field. Because the exterior surface is positively charged, the bubble-propelled microtubes adsorbed E. coli with high efficiency. The removal ratio of E. coli by a single treatment reached 99 %. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. China places first self-financed offshore development on production

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that China's Bohai Oil Co. (BOC) last month started up its first exclusively self-financed offshore petroleum development. Jinzhou 20-2 oil and gas/condensate field went on stream in the Liaodong Bay area of the Bohai Sea with production of 53 MMcfd of gas and 3,019 b/d of condensate

  4. Self-propelled motion in a viscous compressible fluid –unbounded domains

    Czech Academy of Sciences Publication Activity Database

    Mácha, Václav; Nečasová, Šárka

    2016-01-01

    Roč. 26, č. 4 (2016), s. 627-643 ISSN 0218-2025 R&D Projects: GA ČR GA13-00522S Institutional support: RVO:67985840 Keywords : self-propelled motion * compressible fluid * deformable structure Subject RIV: BA - General Mathematics Impact factor: 2.860, year: 2016 http://www.worldscientific.com/doi/10.1142/S0218202516500123

  5. Experimental Investigation of the Self-Propelled Motion of a Sodium Oleate Tablet and Boat at an Oil-Water Interface.

    Science.gov (United States)

    Watahiki, Yasuhito; Nomoto, Tomonori; Chiari, Luca; Toyota, Taro; Fujinami, Masanori

    2018-05-15

    The self-propelled behaviors of macroscopic inanimate objects at surfaces and interfaces are ubiquitous phenomena of fundamental interest in interface science. However, given the existence of a large variety of systems with their own inherent chemical properties, the kinematics of the self-propelled motion and the dynamics of the forces driving these systems often remain largely unknown. Here, we experimentally investigate the spontaneous motion of a sodium oleate tablet at a water-nitrobenzene interface, under nonequilibrium and global isothermal conditions, through measurements of the interfacial tension with the noninvasive, quasi-elastic laser scattering method. The sodium oleate tablet was self-propelled due to an imbalance in the interfacial tension induced by the inhomogeneous adsorption of oleate/oleic acid molecules. The kinetics of the self-propelled motion of a boat-shaped plastic sheet bearing sodium oleate tablets at a sodium oleate aqueous solution-nitrobenzene interface was also studied. The interfacial tension difference between the front and rear of the boat was quantitatively identified as the force pushing the boat forward, although the Marangoni flow due to the uneven distribution of the interfacial tension behind the boat tended to decelerate the motion.

  6. pH-Sensitive self-propelled motion of oil droplets in the presence of cationic surfactants containing hydrolyzable ester linkages.

    Science.gov (United States)

    Banno, Taisuke; Kuroha, Rie; Toyota, Taro

    2012-01-17

    Self-propelled oil droplets in a nonequilibrium system have drawn much attention as both a primitive type of inanimate chemical machinery and a dynamic model of the origin of life. Here, to create the pH-sensitive self-propelled motion of oil droplets, we synthesized cationic surfactants containing hydrolyzable ester linkages. We found that n-heptyloxybenzaldehyde oil droplets were self-propelled in the presence of ester-containing cationic surfactant. In basic solution prepared with sodium hydroxide, oil droplets moved as molecular aggregates formed on their surface. Moreover, the self-propelled motion in the presence of the hydrolyzable cationic surfactant lasted longer than that in the presence of nonhydrolyzable cationic surfactant. This is probably due to the production of a fatty acid by the hydrolysis of the ester-containing cationic surfactant and the subsequent neutralization of the fatty acid with sodium hydroxide. A complex surfactant was formed in the aqueous solution because of the cation and anion combination. Because such complex formation can induce both a decrease in the interfacial tension of the oil droplet and self-assembly with n-heptyloxybenzaldehyde and lauric acid in the aqueous dispersion, the prolonged movement of the oil droplet may be explained by the increase in heterogeneity of the interfacial tension of the oil droplet triggered by the hydrolysis of the ester-containing surfactant. © 2011 American Chemical Society

  7. Partial drift volume due to a self-propelled swimmer

    Science.gov (United States)

    Chisholm, Nicholas G.; Khair, Aditya S.

    2018-01-01

    We assess the ability of a self-propelled swimmer to displace a volume of fluid that is large compared to its own volume via the mechanism of partial drift. The swimmer performs rectilinear locomotion in an incompressible, unbounded Newtonian fluid. The partial drift volume D is the volume of fluid enclosed between the initial and final profiles of an initially flat circular disk of marked fluid elements; the disk is initially aligned perpendicular to the direction of locomotion and subsequently distorted due to the passage of the swimmer, which travels a finite distance. To focus on the possibility of large-scale drift, we model the swimmer simply as a force dipole aligned with the swimming direction. At zero Reynolds number (Re =0 ), we demonstrate that D grows without limit as the radius of the marked fluid disk h is made large, indicating that a swimmer at Re =0 can generate a partial drift volume much larger than its own volume. Next, we consider a steady swimmer at small Re , which is modeled as the force-dipole solution to Oseen's equation. Here, we find that D no longer diverges with h , which is due to inertial screening of viscous forces, and is effectively proportional to the magnitude of the force dipole exerted by the swimmer. The validity of this result is extended to Re ≥O (1 ) —the realm of intermediate-Re swimmers such as copepods—by taking advantage of the fact that, in this case, the flow is also described by Oseen's equations at distances much larger than the characteristic linear dimension of the swimmer. Next, we utilize an integral momentum balance to demonstrate that our analysis for a steady inertial swimmer also holds, in a time-averaged sense, for an unsteady swimmer that does not experience a net acceleration over a stroke cycle. Finally, we use experimental data to estimate D for a few real swimmers. Interestingly, we find that D depends heavily on the kinematics of swimming, and, in certain cases, D can be significantly greater

  8. Influence of Propulsion Type on the Stratified Near Wake of an Axisymmetric Self-Propelled Body

    Directory of Open Access Journals (Sweden)

    Matthew C. Jones

    2018-05-01

    Full Text Available To better understand the influence of swirl on the thermally-stratified near wake of a self-propelled axisymmetric vehicle, three propulsor schemes were considered: a single propeller, contra-rotating propellers (CRP, and a zero-swirl, uniform-velocity jet. The propellers were modeled using an Actuator-Line model in an unsteady Reynolds-Averaged Navier–Stokes simulation, where the Reynolds number is R e L = 3.1 × 10 8 using the freestream velocity and body length. The authors previously showed good comparison to experimental data with this approach. Visualization of vortical structures shows the helical paths of blade-tip vortices from the single propeller as well as the complicated vortical interaction between contra-rotating blades. Comparison of instantaneous and time-averaged fields shows that temporally stationary fields emerge by half of a body length downstream. Circumferentially-averaged axial velocity profiles show similarities between the single propeller and CRP in contrast to the jet configuration. Swirl velocity of the CRP, however, was attenuated in comparison to that of the single propeller case. Mixed-patch contour maps illustrate the unique temperature distribution of each configuration as a consequence of their respective swirl profiles. Finally, kinetic and potential energy is integrated along downstream axial planes to reveal key differences between the configurations. The CRP configuration creates less potential energy by reducing swirl that would otherwise persist in the near wake of a single-propeller wake.

  9. Numerical Treatment of the Boltzmann Equation for Self-Propelled Particle Systems

    Directory of Open Access Journals (Sweden)

    Florian Thüroff

    2014-11-01

    Full Text Available Kinetic theories constitute one of the most promising tools to decipher the characteristic spatiotemporal dynamics in systems of actively propelled particles. In this context, the Boltzmann equation plays a pivotal role, since it provides a natural translation between a particle-level description of the system’s dynamics and the corresponding hydrodynamic fields. Yet, the intricate mathematical structure of the Boltzmann equation substantially limits the progress toward a full understanding of this equation by solely analytical means. Here, we propose a general framework to numerically solve the Boltzmann equation for self-propelled particle systems in two spatial dimensions and with arbitrary boundary conditions. We discuss potential applications of this numerical framework to active matter systems and use the algorithm to give a detailed analysis to a model system of self-propelled particles with polar interactions. In accordance with previous studies, we find that spatially homogeneous isotropic and broken-symmetry states populate two distinct regions in parameter space, which are separated by a narrow region of spatially inhomogeneous, density-segregated moving patterns. We find clear evidence that these three regions in parameter space are connected by first-order phase transitions and that the transition between the spatially homogeneous isotropic and polar ordered phases bears striking similarities to liquid-gas phase transitions in equilibrium systems. Within the density-segregated parameter regime, we find a novel stable limit-cycle solution of the Boltzmann equation, which consists of parallel lanes of polar clusters moving in opposite directions, so as to render the overall symmetry of the system’s ordered state nematic, despite purely polar interactions on the level of single particles.

  10. Risk-based Inspection Planning Optimisation of Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Ramirez, José Rangel; Sørensen, John Dalsgaard

    2011-01-01

    Wind industry is substantially propelled and the future scenarios designate offshore locations as important sites for energy production. With this development, offshore wind farms represent a feasible option to accomplish the needed energy, bringing with it technical and economical challenges......, but considering the lower reliability level for wind turbines. This framework is addressing fatigue prone details in welded steel joints typically located in the wind turbine substructure. The increase of turbulence in-wind farms (IWF) due to wake effects is taken into account using a code-based turbulence model...

  11. Hydrodynamic investigation of a self-propelled robotic fish based on a force-feedback control method

    International Nuclear Information System (INIS)

    Wen, L; Wang, T M; Liang, J H; Wu, G H

    2012-01-01

    We implement a mackerel (Scomber scombrus) body-shaped robot, programmed to display the three most typical body/caudal fin undulatory kinematics (i.e. anguilliform, carangiform and thunniform), in order to biomimetically investigate hydrodynamic issues not easily tackled experimentally with live fish. The robotic mackerel, mounted on a servo towing system and initially at rest, can determine its self-propelled speed by measuring the external force acting upon it and allowing for the simultaneous measurement of power, flow field and self-propelled speed. Experimental results showed that the robotic swimmer with thunniform kinematics achieved a faster final swimming speed (St = 0.424) relative to those with carangiform (St = 0.43) and anguilliform kinematics (St = 0.55). The thrust efficiency, estimated from a digital particle image velocimetry (DPIV) flow field, showed that the robotic swimmer with thunniform kinematics is more efficient (47.3%) than those with carangiform (31.4%) and anguilliform kinematics (26.6%). Furthermore, the DPIV measurements illustrate that the large-scale characteristics of the flow pattern generated by the robotic swimmer with both anguilliform and carangiform kinematics were wedge-like, double-row wake structures. Additionally, a typical single-row reverse Karman vortex was produced by the robotic swimmer using thunniform kinematics. Finally, we discuss this novel force-feedback-controlled experimental method, and review the relative self-propelled hydrodynamic results of the robot when utilizing the three types of undulatory kinematics. (paper)

  12. Phase separation of self-propelled ballistic particles

    Science.gov (United States)

    Bruss, Isaac R.; Glotzer, Sharon C.

    2018-04-01

    Self-propelled particles phase-separate into coexisting dense and dilute regions above a critical density. The statistical nature of their stochastic motion lends itself to various theories that predict the onset of phase separation. However, these theories are ill-equipped to describe such behavior when noise becomes negligible. To overcome this limitation, we present a predictive model that relies on two density-dependent timescales: τF, the mean time particles spend between collisions; and τC, the mean lifetime of a collision. We show that only when τF<τC do collisions last long enough to develop a growing cluster and initiate phase separation. Using both analytical calculations and active particle simulations, we measure these timescales and determine the critical density for phase separation in both two and three dimensions.

  13. Self-propelled x-ray flaw detector

    International Nuclear Information System (INIS)

    Ershov, L.S.; Krasilnikov, S.B.; Lozovoi, L.N.; Losev, J.F.; Morgovsky, L.Y.; Pelix, E.A.; Khakimyanov, R.R.

    1988-01-01

    A self-propelled X-ray flaw detector for radiographic inspection of welded joints in pipelines comprises a carriage mounting a motor, a detector having two Geiger counters, a pulsed X-ray generator, and an exposure and carriage electronic control system. A memory unit in the control system has four storage elements containing information about the motion of the carriage. As the carriage moves in direction A, first one and then the other of the Geiger counters receives radiation from an isotope source positioned near a joint, and by means of logic circuitry in the control system, the information in the storage elements is modified to stop the carriage and to operate a timer to expose the weld. During exposure the X-rays may interfere with the information in the storage elements, but by means of a square-wave generator and the logic circuitry, the stored information is correctly reset in order to eliminate false operation of the memory unit. (author)

  14. 49 CFR 173.220 - Internal combustion engines, self-propelled vehicles, mechanical equipment containing internal...

    Science.gov (United States)

    2010-10-01

    ... and vehicles with certain electronic equipment when transported by aircraft or vessel. When an... vehicles, mechanical equipment containing internal combustion engines, and battery powered vehicles or... Than Class 1 and Class 7 § 173.220 Internal combustion engines, self-propelled vehicles, mechanical...

  15. Self-propelled magnesium based micromotors: synthesis and magnetic steering

    Directory of Open Access Journals (Sweden)

    Jin Dongdong

    2015-01-01

    Full Text Available In this work the magnesium based Janus micromotors were prepared by an asymmetric coating of Co-Au bilayer on the surface of Mg microparticles. The micromotor could efficiently self-propel in phosphate buffer saline (PBS with a highest speed of 221 μm·s−1 without any extra additives through the macrogalvanic corrosion and pitting corrosion mechanism. The influence of pH value of PBS buffer on the motion of micromotor was also investigated. Moreover, we demonstrated that the motion of micromotor could be controlled by an external magnetic field rapidly and accurately, indicating the potential application in biomedicine.

  16. Catalytic micromotor generating self-propelled regular motion through random fluctuation

    Science.gov (United States)

    Yamamoto, Daigo; Mukai, Atsushi; Okita, Naoaki; Yoshikawa, Kenichi; Shioi, Akihisa

    2013-07-01

    Most of the current studies on nano/microscale motors to generate regular motion have adapted the strategy to fabricate a composite with different materials. In this paper, we report that a simple object solely made of platinum generates regular motion driven by a catalytic chemical reaction with hydrogen peroxide. Depending on the morphological symmetry of the catalytic particles, a rich variety of random and regular motions are observed. The experimental trend is well reproduced by a simple theoretical model by taking into account of the anisotropic viscous effect on the self-propelled active Brownian fluctuation.

  17. CONSTRUCTION SELF-PROPELLED PNEUMOPUNCHERS WITH LOCKING MECHANISM

    Directory of Open Access Journals (Sweden)

    V. K. Perederey

    2016-01-01

    Full Text Available The paper reveals one of possible methods for higher productivity and reliability of building self-propelled pneumopunchers which are intended for making holes in soil while using trenchless method and constructing various engineering communications under car, tram and rail lines, airport runways. A new design of building pneumopuncher with increased productivity due to higher speed for hole formation in soil and its reliability has been presented in the paper. A formula for determination of displacement increment for a new pneumopuncher in comparison with the conventional one has been obtained in the paper. The paper describes a design and operation principal of the building self-propelled pneumopuncher which is equipped with a locking mechanism with the purpose to neutralize action of soil elastic forces and reactive repulsive force. The locking mechanism keeps the pneumopuncher in the hole. The pneumopuncher consists of a body with anvil, movable hammer, a manifold which is set in axial deepening of the hammer, a nut and a locking mechanism. Improvement of operational pneumopuncher reliability is attained due to the fact that the locking mechanism is made in the form of two coaxially positioned inner and outer cups having a common basis. A piston is installed in the middle of the inner cup, a spring is fixed over the piston and a rod with a breaking shoe is positioned at the end. Height of the inner cup is less the outer cup height and there is an annular cavity between them which is connected with a chamber. The chamber is formed by the piston, the inner cup and the manifold. The annular cavity through an opening in the inner cup wall, two sylphons, a channel in the nut end and an opening in the vertical wall of the manifold are connected with a chamber of operating stroke. The sylphons are placed between the outer cup and the nut, between the nut and the manifold. Differential equations for movement of pneumopuncher in soil have been

  18. Boundaries Control Collective Dynamics of Inertial Self-Propelled Robots

    Science.gov (United States)

    Deblais, A.; Barois, T.; Guerin, T.; Delville, P. H.; Vaudaine, R.; Lintuvuori, J. S.; Boudet, J. F.; Baret, J. C.; Kellay, H.

    2018-05-01

    Simple ingredients, such as well-defined interactions and couplings for the velocity and orientation of self-propelled objects, are sufficient to produce complex collective behavior in assemblies of such entities. Here, we use assemblies of rodlike robots made motile through self-vibration. When confined in circular arenas, dilute assemblies of these rods act as a gas. Increasing the surface fraction leads to a collective behavior near the boundaries: polar clusters emerge while, in the bulk, gaslike behavior is retained. The coexistence between a gas and surface clusters is a direct consequence of inertial effects as shown by our simulations. A theoretical model, based on surface mediated transport accounts for this coexistence and illustrates the exact role of the boundaries. Our study paves the way towards the control of collective behavior: By using deformable but free to move arenas, we demonstrate that the surface induced clusters can lead to directed motion, while the topology of the surface states can be controlled by biasing the motility of the particles.

  19. Hydrodynamics and propulsion mechanism of self-propelled catalytic micromotors: model and experiment.

    Science.gov (United States)

    Li, Longqiu; Wang, Jiyuan; Li, Tianlong; Song, Wenping; Zhang, Guangyu

    2014-10-14

    The hydrodynamic behavior and propulsion mechanism of self-propelled micromotors are studied theoretically and experimentally. A hydrodynamic model to describe bubble growth and detachment is proposed to investigate the mechanism of a self-propelled conical tubular catalytic micromotor considering bubble geometric asymmetry and buoyancy force. The growth force caused by the growth of the bubble surface against the fluid is the driving force for micromotor motion. Also, the buoyancy force plays a primary role in bubble detachment. The effect of geometrical parameters on the micromotor velocity and drag force is presented. The bubble radius ratio is investigated for different micromotor radii to determine its hydrodynamic behavior during bubble ejection. The average micromotor velocity is found to be strongly dependent on the semi-cone angle, expelling frequency and bubble radius ratio. The semi-cone angle has a significant effect on the expelling frequency for conical tubular micromotors. The predicted results are compared to already existing experimental data for cylindrical micromotors (semi-cone angle δ = 0°) and conical micromotors. A good agreement is found between the theoretical calculation and experimental results. This model provides a profound explanation for the propulsion mechanism of a catalytic micromotor and can be used to optimize the micromotor design for its biomedical and environmental applications.

  20. The Bumper Boats Effect: Effect of Inertia on Self Propelled Active Particles Systems

    Science.gov (United States)

    Dai, Chengyu; Bruss, Isaac; Glotzer, Sharon

    Active matter has been well studied using the standard Brownian dynamics model, which assumes that the self-propelled particles have no inertia. However, many examples of active systems, such as sub-millimeter bacteria and colloids, have non-negligible inertia. Using particle-based Langevin Dynamics simulation with HOOMD-blue, we study the role of particle inertia on the collective emergent behavior of self-propelled particles. We find that inertia hinders motility-induced phase separation. This is because the effective speed of particles is reduced due to particle-particle collisions-\\x9Dmuch like bumper boats, which take time to reach terminal velocity after a crash. We are able to fully account for this effect by tracking a particle's average rather than terminal velocity, allowing us to extend the standard Brownian dynamics model to account for the effects of momentum. This study aims to inform experimental systems where the inertia of the active particles is non-negligible. We acknowledge the funding support from the Center for Bio-Inspired Energy Science (CBES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0000989.

  1. Gela offshore field

    Energy Technology Data Exchange (ETDEWEB)

    Pagliughi, G

    1965-06-01

    The field of Gela, off the southern shore of Sicily, is the only producing offshore field in the Mediterranean. It produces from Triassic dolimite limestones of 434-m thickness, water level at -3517 m. It is a water-drive reservoir producing 10/sup 0/F API oil and has 79 wells, some of them on shore. Most offshore wells are directional wells from shore; there are also 2 fixed platforms and a special mobile platform. The wells are on pump (stroke, 72 in.; capacity 200 tons per day). The crude goes directly to a combination refinery-petrochemical complex at Gela.

  2. Capturing self-propelled particles in a moving microwedge

    Science.gov (United States)

    Kaiser, A.; Popowa, K.; Wensink, H. H.; Löwen, H.

    2013-08-01

    Catching fish with a fishing net is typically done either by dragging a fishing net through quiescent water or by placing a stationary basket trap into a stream. We transfer these general concepts to micron-sized self-motile particles moving in a solvent at low Reynolds number and study their collective trapping behavior by means of computer simulations of a two-dimensional system of self-propelled rods. A chevron-shaped obstacle is dragged through the active suspension with a constant speed v and acts as a trapping “net.” Three trapping states can be identified corresponding to no trapping, partial trapping, and complete trapping and their relative stability is studied as a function of the apex angle of the wedge, the swimmer density, and the drag speed v. When the net is dragged along the inner wedge, complete trapping is facilitated and a partially trapped state changes into a complete trapping state if the drag speed exceeds a certain value. Reversing the drag direction leads to a reentrant transition from no trapping to complete trapping and then back to no trapping upon increasing the drag speed along the outer wedge contour. The transition to complete trapping is marked by a templated self-assembly of rods forming polar smectic structures anchored onto the inner contour of the wedge. Our predictions can be verified in experiments of artificial or microbial swimmers confined in microfluidic trapping devices.

  3. Ground effect on a self-propelled undulatory foil

    Science.gov (United States)

    Zhang, Dong; Chao, Liming; Pan, Guang

    2018-04-01

    The unsteady ground effect on a self-propelled undulatory foil is numerically investigated in this paper. The situation can be widely found in nature especially for fish swimming near the ground. In this study, frequency varies from 0.1 Hz to 2 Hz and distance from the ground varies from 0.2 L to 1 L. Under most kinematics, the ground has a negative effect on the performance of the foil. The swimming velocity slows down, power spend increases and swimming economy reduces. The higher frequency can produce a larger negative effect. Only at the low frequencies f = 0.1 Hz, 0.25 Hz and 0.5 Hz with distance of 0.2 L the velocity can be enhanced by 18%, 6%, 0.8%, respectively. The lift production is found to be increased. The link between the performance and the wake dynamics is also established by studying the vortex structures.

  4. 30 CFR 75.1710-1 - Canopies or cabs; self-propelled diesel-powered and electric face equipment; installation...

    Science.gov (United States)

    2010-07-01

    ... and electric face equipment; installation requirements. (a) Except as provided in paragraph (f) of this section, all self-propelled diesel-powered and electric face equipment, including shuttle cars... and electric face equipment; installation requirements. 75.1710-1 Section 75.1710-1 Mineral Resources...

  5. Recent Progress in Bionic Condensate Microdrop Self-Propelling Surfaces.

    Science.gov (United States)

    Gong, Xiaojing; Gao, Xuefeng; Jiang, Lei

    2017-12-01

    Bionic condensate microdrop self-propelling (CMDSP) surfaces are attracting increased attention as novel, low-adhesivity superhydrophobic surfaces due to their value in fundamental research and technological innovation, e.g., for enhancing heat transfer, energy-effective antifreezing, and electrostatic energy harvesting. Here, the focus is on recent progress in bionic CMDSP surfaces. Metal-based CMDSP surfaces, which are the most promising in their respective fields, are highlighted for use in future applications. The selected topics are divided into four sections: biological prototypes, mechanism and construction rules, fabrication, and applications of metal-based CMDSP surfaces. Finally, the challenges and future development trends in bionic CMDSP surfaces are envisioned, especially the utilization of potential bionic inspiration in the design of more advanced CMDSP surfaces. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Transitions induced by speed in self-propelled particles system with attractive interactions

    Science.gov (United States)

    Cambui, Dorilson. S.; Rosas, Alexandre

    2018-05-01

    In this work, we consider a system of self-propelled particles with attractive interactions in two dimensions. The model presents an order-disorder transition with the speed playing the role of the control parameter. In order to characterize the transition, we investigate the behavior of the order parameter and the Binder cumulant as a function of the speed. Our main finding is that the transition can be either continuous or discontinuous depending on two parameter of the model: the strength of the noise and the radius of attraction.

  7. Modeling Propellant Tank Dynamics

    Data.gov (United States)

    National Aeronautics and Space Administration — The main objective of my work will be to develop accurate models of self-pressurizing propellant tanks for use in designing hybrid rockets. The first key goal is to...

  8. Mode coupling theory for nonequilibrium glassy dynamics of thermal self-propelled particles.

    Science.gov (United States)

    Feng, Mengkai; Hou, Zhonghuai

    2017-06-28

    We present a mode coupling theory study for the relaxation and glassy dynamics of a system of strongly interacting self-propelled particles, wherein the self-propulsion force is described by Ornstein-Uhlenbeck colored noise and thermal noises are included. Our starting point is an effective Smoluchowski equation governing the distribution function of particle positions, from which we derive a memory function equation for the time dependence of density fluctuations in nonequilibrium steady states. With the basic assumption of the absence of macroscopic currents and standard mode coupling approximation, we can obtain expressions for the irreducible memory function and other relevant dynamic terms, wherein the nonequilibrium character of the active system is manifested through an averaged diffusion coefficient D[combining macron] and a nontrivial structural function S 2 (q) with q being the magnitude of wave vector q. D[combining macron] and S 2 (q) enter the frequency term and the vertex term for the memory function, and thus influence both the short time and the long time dynamics of the system. With these equations obtained, we study the glassy dynamics of this thermal self-propelled particle system by investigating the Debye-Waller factor f q and relaxation time τ α as functions of the persistence time τ p of self-propulsion, the single particle effective temperature T eff as well as the number density ρ. Consequently, we find the critical density ρ c for given τ p shifts to larger values with increasing magnitude of propulsion force or effective temperature, in good accordance with previously reported simulation work. In addition, the theory facilitates us to study the critical effective temperature T for fixed ρ as well as its dependence on τ p . We find that T increases with τ p and in the limit τ p → 0, it approaches the value for a simple passive Brownian system as expected. Our theory also well recovers the results for passive systems and can be

  9. Personality and self-reported use of mobile phones for games.

    Science.gov (United States)

    Phillips, James G; Butt, Sarah; Blaszczynski, Alex

    2006-12-01

    Mobile phones are popular devices that may generate problems for a section of the community. A previous study using the Eysenck Personality Questionnaire found that extraverts with low self-esteem reported more problems with their mobile phone use. The present study used the NEO FI and Coopersmith Self-Esteem Inventory to predict the self reported mobile phone use of 112 participants. Multiple regression found that people low on agreeableness were more likely to use their mobile phones to play games. The findings imply an interplay between personality traits and excessive or problematic use on mobile phones that is relevant to proposed innovations such as gambling on mobile phones.

  10. Developments in offshore technology. Entwicklungen in der Offshoretechnik

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This book contains the summarized lectures held on the 8th of October, 1981 within the first status Seminar 'Offshore technology' which was organized by the Federal Minstry for Research and Technology. Contents are divided into: 1. Offshore-natural gas liquefaction, conveying systems. Offshore-tanker charging with supercold liquiefied gases; development of LNG-offshore - convayance systems; 2.) Development of components and installations in offshore structures: mooving-measuring- and monitoring systems for the installation of the EPOS deck; underwater-piling with a hydraulic-pile hammer; cast steel nodes for offshore-structures (material, calculation, design); 3.) underwater tools: the underwater-working system SUPRA; test results and experience with the unmanned UW-instrument-carrier FUGE; development of a mobile diver assistance vehicle for inspection and maintenance duties; 4.) underwater-pipeline-technique: flexible offshore-pipeline/continuous production and assembly, pipeline assembly at sea according to the J-Method with flash-welding technique; construction and testing of UWAG I (underwater working device) for embedding cables and pipes in the ocean soil.

  11. Development of self-propelled measuring system for 2-dimensional distribution of radiation beam using plastic scintillation fibers

    International Nuclear Information System (INIS)

    Matsumura, Shuji; Kitahara, Sigeo; Yamanishi, Akio; Nose, Hiroyuki; Tisaka, Osamu

    2013-01-01

    Conventional 2-dimensional distribution of radiation beam is usually estimated from dose rates on a lot of dispersed spots, which has two problems. One is that it takes much time to measure distribution in a large area, and another problem is it is difficult to detect a localized hot spot from dispersed measurement results. To solve these problems we have developed a self-propelled measuring system adopting plastic scintillation fibers (PSF) as a detector. Estimating dose distribution in PSF and scanning PSF with self-propelled system give a 2-dimensional distribution of radiation beam in shorter measuring time and better spatial resolution than usual. A global positioning system was also installed to our system to know the absolute position of interest. With this system we have verified that we can estimate the 2-dimensional distribution in area of 2,000 m 2 in an hour. This report describes the overview of our newly developed system. (author)

  12. Self-Propelled Motion of Monodisperse Underwater Oil Droplets Formed by a Microfluidic Device.

    Science.gov (United States)

    Ueno, Naoko; Banno, Taisuke; Asami, Arisa; Kazayama, Yuki; Morimoto, Yuya; Osaki, Toshihisa; Takeuchi, Shoji; Kitahata, Hiroyuki; Toyota, Taro

    2017-06-06

    We evaluated the speed profile of self-propelled underwater oil droplets comprising a hydrophobic aldehyde derivative in terms of their diameter and the surrounding surfactant concentration using a microfluidic device. We found that the speed of the oil droplets is dependent on not only the surfactant concentration but also the droplet size in a certain range of the surfactant concentration. This tendency is interpreted in terms of combination of the oil and surfactant affording spontaneous emulsification in addition to the Marangoni effect.

  13. Developing and validating an instrument for measuring mobile computing self-efficacy.

    Science.gov (United States)

    Wang, Yi-Shun; Wang, Hsiu-Yuan

    2008-08-01

    IT-related self-efficacy has been found to have a critical influence on system use. However, traditional measures of computer self-efficacy and Internet-related self-efficacy are perceived to be inapplicable in the context of mobile computing and commerce because they are targeted primarily at either desktop computer or wire-based technology contexts. Based on previous research, this study develops and validates a multidimensional instrument for measuring mobile computing self-efficacy (MCSE). This empirically validated instrument will be useful to researchers in developing and testing the theories of mobile user behavior, and to practitioners in assessing the mobile computing self-efficacy of users and promoting the use of mobile commerce systems.

  14. Catalytic microtubular jet engines self-propelled by accumulated gas bubbles.

    Science.gov (United States)

    Solovev, Alexander A; Mei, Yongfeng; Bermúdez Ureña, Esteban; Huang, Gaoshan; Schmidt, Oliver G

    2009-07-01

    Strain-engineered microtubes with an inner catalytic surface serve as self-propelled microjet engines with speeds of up to approximately 2 mm s(-1) (approximately 50 body lengths per second). The motion of the microjets is caused by gas bubbles ejecting from one opening of the tube, and the velocity can be well approximated by the product of the bubble radius and the bubble ejection frequency. Trajectories of various different geometries are well visualized by long microbubble tails. If a magnetic layer is integrated into the wall of the microjet engine, we can control and localize the trajectories by applying external rotating magnetic fields. Fluid (i.e., fuel) pumping through the microtubes is revealed and directly clarifies the working principle of the catalytic microjet engines.

  15. Self-propelled pedestrian dynamics model: Application to passenger movement and infection propagation in airplanes

    OpenAIRE

    Namilae, S.; Srinivasan, A.; Mubayi, A.; Scotch, M.; Pahle, R.

    2017-01-01

    Reducing the number of contacts between passengers on an airplane can potentially curb the spread of infectious diseases. In this paper, a social force based pedestrian movement model is formulated and applied to evaluate the movement and contacts among passengers during boarding and deplaning of an airplane. Within the social force modeling framework, we introduce location dependence on the self-propelling momentum of pedestrian particles. The model parameters are varied over a large design ...

  16. The non-self-propelled hydropower vessel for electrical energy providing of Arctic and Far East hard-to-reach areas

    Directory of Open Access Journals (Sweden)

    Borisova L. F.

    2015-12-01

    Full Text Available The floating tidal unceasing action power plant design based on the non-self-propelled vessel has been proposed. To produce electric energy the renewable energy of wind and tidal waves has been used

  17. A compact self-recording pressure based sea level gauge suitable for deployments at harbour and offshore environments

    Digital Repository Service at National Institute of Oceanography (India)

    Desa, E.; Peshwe, V.B.; Joseph, A.; Mehra, P.; Naik, G.P.; Kumar, V.; Desa, E.S.; Desai, R.G.P.; Nagvekar, S.; Desai, S.P.

    A compact and lightweight self-recording pressure based sea level gauge has been designed to suit deployments from harbour and offshore environments. A novel hydraulic coupling device designed in-house was used to transfer the seawater pressure...

  18. RISK ASSESSMENT DURING OPERATING SELF-PROPELLED LIFTING JIB CRANES IN CONDITIONS OF INSUFFICIENT INFORMATION

    OpenAIRE

    Lagerev A.V.; Konchits S.V.; Bleyshmidt L.I.

    2018-01-01

    Presents the results of statistical analyses identified by the expert diagnostics of defects of the self-propelled lifting jib cranes, spent a normative term of exploitation. The greatest number of defects associated with the destruction and dete-rioration of structural elements, the occurrence of fatigue cracks and a violation of the conditions of operation of the equipment. The greatest number of defects occurs in the hydraulic system of cranes, the rope-block system, and rarely in steel st...

  19. Self-control and problematic mobile phone use in Chinese college students: the mediating role of mobile phone use patterns

    OpenAIRE

    Jiang, Zhaocai; Zhao, Xiuxin

    2016-01-01

    Background With the popularity of mobile phones, problematic mobile phone use is getting increasing attention in recent years. Although self-control was found to be a critical predictor of problematic mobile phone use, no study has ever explored the association between self-control and mobile phone use patterns as well as the possible pathway how self-control affects problematic mobile phone use. Methods Four hundred sixty-eight college students were randomly selected in this study. Data were...

  20. Self-Organization of Motor-Propelled Cytoskeletal Filaments at Topographically Defined Borders

    Directory of Open Access Journals (Sweden)

    Alf Månsson

    2012-01-01

    Full Text Available Self-organization phenomena are of critical importance in living organisms and of great interest to exploit in nanotechnology. Here we describe in vitro self-organization of molecular motor-propelled actin filaments, manifested as a tendency of the filaments to accumulate in high density close to topographically defined edges on nano- and microstructured surfaces. We hypothesized that this “edge-tracing” effect either (1 results from increased motor density along the guiding edges or (2 is a direct consequence of the asymmetric constraints on stochastic changes in filament sliding direction imposed by the edges. The latter hypothesis is well captured by a model explicitly defining the constraints of motility on structured surfaces in combination with Monte-Carlo simulations [cf. Nitta et al. (2006] of filament sliding. In support of hypothesis 2 we found that the model reproduced the edge tracing effect without the need to assume increased motor density at the edges. We then used model simulations to elucidate mechanistic details. The results are discussed in relation to nanotechnological applications and future experiments to test model predictions.

  1. Performance analysis of a self-locating mobile sensor

    DEFF Research Database (Denmark)

    Bøgsted, Martin; Rasmussen, Jakob Gulddahl; Lundbye-Christensen, Søren

    to an autoregressive model. Measurement uncertainty is assumed to follow a Gaussian distribution and the probability for detecting a distance to a given sensor is assumed to fall off exponentially with squared distance. The combined model is formulated as a nonlinear state space model and Bayesian inference......We consider the ability of a mobile sensor to locate its own geographical location, the so-called self-localization problem. The need to locate people and objects has inspired the development of many systems for automatic localization. Most systems are based on location information and measured...... the performance of localization algorithms in mobile and critical situations. This is done by exploring the performance of various filtering techniques for self-localization of a mobile sensor in a field of sensors. More specifically, we model the mobility of the sensor such that the velocity varies according...

  2. Mobility Model for Self-Organizing and Cooperative MSN and MANET Systems

    Directory of Open Access Journals (Sweden)

    Andrzej Sikora

    2012-03-01

    Full Text Available Self-organization mechanisms are used for building scalable systems consisting of a huge number of subsystems. In computer networks, self-organizing is especially important in ad hoc networking. A self-organizing ad hoc network is a collection of wireless devices that collaborate with each other to form a network system that adapts to achieve a goal or goals. Such network is often built from mobile devices that may spontaneously create a network and dynamically adapted to changes in an unknown environment. Mobility pattern is a critical element that influences the performance characteristics of mobile sensor networks (MSN and mobile ad hoc networks (MANET. In this paper, we survey main directions to mobility modeling. We describe a novel algorithm for calculating mobility patterns for mobile devices that is based on a cluster formation and an artificial potential function. Finally, we present the simulation results of its application to a rescue mission planning.

  3. Offshore Wind Energy Cost Modeling Installation and Decommissioning

    CERN Document Server

    Kaiser, Mark J

    2012-01-01

    Offshore wind energy is one of the most promising and fastest growing alternative energy sources in the world. Offshore Wind Energy Cost Modeling provides a methodological framework to assess installation and decommissioning costs, and using examples from the European experience, provides a broad review of existing processes and systems used in the offshore wind industry. Offshore Wind Energy Cost Modeling provides a step-by-step guide to modeling costs over four sections. These sections cover: ·Background and introductory material, ·Installation processes and vessel requirements, ·Installation cost estimation, and ·Decommissioning methods and cost estimation.  This self-contained and detailed treatment of the key principles in offshore wind development is supported throughout by visual aids and data tables. Offshore Wind Energy Cost Modeling is a key resource for anyone interested in the offshore wind industry, particularly those interested in the technical and economic aspects of installation and decom...

  4. From one to many: dynamic assembly and collective behavior of self-propelled colloidal motors.

    Science.gov (United States)

    Wang, Wei; Duan, Wentao; Ahmed, Suzanne; Sen, Ayusman; Mallouk, Thomas E

    2015-07-21

    The assembly of complex structures from simpler, individual units is a hallmark of biology. Examples include the pairing of DNA strands, the assembly of protein chains into quaternary structures, the formation of tissues and organs from cells, and the self-organization of bacterial colonies, flocks of birds, and human beings in cities. While the individual behaviors of biomolecules, bacteria, birds, and humans are governed by relatively simple rules, groups assembled from many individuals exhibit complex collective behaviors and functions that do not exist in the absence of the hierarchically organized structure. Self-assembly is a familiar concept to chemists who study the formation and properties of monolayers, crystals, and supramolecular structures. In chemical self-assembly, disorder evolves to order as the system approaches equilibrium. In contrast, living assemblies are typically characterized by two additional features: (1) the system constantly dissipates energy and is not at thermodynamic equilibrium; (2) the structure is dynamic and can transform or disassemble in response to stimuli or changing conditions. To distinguish them from equilibrium self-assembled structures, living (or nonliving) assemblies of objects with these characteristics are referred to as active matter. In this Account, we focus on the powered assembly and collective behavior of self-propelled colloids. These nano- and microparticles, also called nano- and micromotors or microswimmers, autonomously convert energy available in the environment (in the form of chemical, electromagnetic, acoustic, or thermal energy) into mechanical motion. Collections of these colloids are a form of synthetic active matter. Because of the analogy to living swimmers of similar size such as bacteria, the dynamic interactions and collective behavior of self-propelled colloids are interesting in the context of understanding biological active matter and in the development of new applications. The progression

  5. Preferential nucleation, guiding, and blocking of self-propelled droplets by dislocations

    Science.gov (United States)

    Kanjanachuchai, Songphol; Wongpinij, Thipusa; Kijamnajsuk, Suphakan; Himwas, Chalermchai; Panyakeow, Somsak; Photongkam, Pat

    2018-04-01

    Lattice-mismatched layers of GaAs/InGaAs are grown on GaAs(001) using molecular beam epitaxy and subsequently heated in vacuum while the surface is imaged in situ using low-energy electron microscopy, in order to study (i) the nucleation of group-III droplets formed as a result of noncongruent sublimation and (ii) the dynamics of these self-propelled droplets as they navigate the surface. It is found that the interfacial misfit dislocation network not only influences the nucleation sites of droplets, but also exerts unusual steering power over their subsequent motion. Atypical droplet flow patterns including 90° and 180° turns are found. The directions of these dislocations-guided droplets are qualitatively explained in terms of in-plane and out-of-plane stress fields associated with the buried dislocations and the driving forces due to chemical potential and stress gradients typical of Marangoni flow. The findings would benefit processes and devices that employ droplets as catalysts or active structures such as droplet epitaxy of quantum nanostructures, vapor-liquid-solid growth of nanowires, or the fabrication of self-integrated circuits.

  6. Swiping, matching, chatting: Self-Presentation and self-disclosure on mobile dating apps

    NARCIS (Netherlands)

    J.R. Ward (Janelle)

    2016-01-01

    markdownabstractPeople have long used rituals of self-presentation and self-disclosure when looking for a romantic connection, whether they seek a passionate love affair, a spouse or a casual encounter. Mobile dating applications like Tinder have exploded in popularity in recent years. On Tinder,

  7. Directional transport of colloids inside a bath of self-propelling walkers.

    Science.gov (United States)

    Merlitz, Holger; Wu, Chenxu; Sommer, Jens-Uwe

    2017-05-24

    We present a setup in which passive colloids inside a solvent are moved to the boundaries of the container. The directional transport is facilitated by self-propelling microparticles ("walkers") with an activity gradient, which reduces their propulsion in the vicinity of bounding walls. An attractive interaction leads to the adsorption of walkers onto the colloid-surfaces in regions of low walker activity. It is shown that the activity gradient generates a free energy gradient which in turn acts as a driving force on the passive colloids. We carry out molecular dynamics simulations and present approaches to a theoretical description of the involved processes. Although the simulation data are not reproduced on a fully quantitative level, their qualitative features are covered by the model. The effect described here may be applied to facilitate a directional transport of drugs or to eliminate pollutants.

  8. Evaluation of Self-Propelled High-Energy Ultrasonic Atomizer on Azoxystrobin and Tebuconazole Application in Sunlit Greenhouse Tomatoes

    Directory of Open Access Journals (Sweden)

    Yan-Jie Li

    2018-05-01

    Full Text Available In this study, a self-propelled high-energy ultrasonic atomizer was evaluated in terms of deposition on the canopy, the loss to the ground, and fungicide residues in cherry tomato and tomato. Artificial collectors fixed to the upper side and underside of the leaves at different depths and heights were used to collect the depositions. A reliable analytical method for determination of azoxystrobin and tebuconazole in artificial collectors and residue samples was developed by using liquid chromatography triple-quadrupole mass spectrometry. The results showed that the atomizer distributed the droplets evenly throughout the greenhouse with good uniformity (CVs below 39%. The ratio of depositions on the internal and external sides was 66–83%, and the ratio of depositions on the underside and upper side was 39–50%. There were no significant differences in depositions between two different height crops. The residues of azoxystrobin and tebuconazole in tomato and cherry tomato fruits were far below the maximum residue limits at harvest time. In general, self-propelled high-energy ultrasonic atomizer used in a greenhouse could increase the depositions, especially on the underside and internal side of the canopies, and lead to a reduction of operator exposure risk.

  9. Helical paths, gravitaxis, and separation phenomena for mass-anisotropic self-propelling colloids: Experiment versus theory

    Science.gov (United States)

    Campbell, Andrew I.; Wittkowski, Raphael; ten Hagen, Borge; Löwen, Hartmut; Ebbens, Stephen J.

    2017-08-01

    The self-propulsion mechanism of active colloidal particles often generates not only translational but also rotational motion. For particles with an anisotropic mass density under gravity, the motion is usually influenced by a downwards oriented force and an aligning torque. Here we study the trajectories of self-propelled bottom-heavy Janus particles in three spatial dimensions both in experiments and by theory. For a sufficiently large mass anisotropy, the particles typically move along helical trajectories whose axis is oriented either parallel or antiparallel to the direction of gravity (i.e., they show gravitaxis). In contrast, if the mass anisotropy is small and rotational diffusion is dominant, gravitational alignment of the trajectories is not possible. Furthermore, the trajectories depend on the angular self-propulsion velocity of the particles. If this component of the active motion is strong and rotates the direction of translational self-propulsion of the particles, their trajectories have many loops, whereas elongated swimming paths occur if the angular self-propulsion is weak. We show that the observed gravitational alignment mechanism and the dependence of the trajectory shape on the angular self-propulsion can be used to separate active colloidal particles with respect to their mass anisotropy and angular self-propulsion, respectively.

  10. Prevalence of Mobile Phone Dependency and its Relationship with Students’ Self Esteem

    OpenAIRE

    Tayebeh Khazaee; AliReza Saadatjoo; Majid Shabani; Mohammad Senobari; Mohsen Baziyan

    2014-01-01

    Introduction: Dependence on mobile phone is a serious problem for work and social life of individuals. People with low self-esteem, have problematic mobile phone use. The aim of this study was to determine the prevalence of mobile dependency and its relationship with self-esteem of students. Methods: In this cross-sectional study, 697 students were chosen through systemic random sampling method. Data collection tools included 10-item rosenberg self-esteem questionnaire with four-point Lik...

  11. The effects of use self-propelled rain guns (typhone) in irrigation of corn (Zea mays L.)

    OpenAIRE

    Kresović, Branka; Dragičević, Vesna; Gajić, Boško; Tapanrova, Angelina; Pejić, Borivoje

    2012-01-01

    The aim of this study was to use results of experimental work to analyse effects of maize irrigation and to quantify basic parameters that are included into exploitation costs of a long-ranged self-propelled sprayer, so called typhoon sprinkler. The four-replicate trial was carried out according to a randomised block design in the experimental fields of the Maize Research Institute, Zemun Polje, during the 2002-2008 period. The irrigation was applied in all years but 2004 in which the precipi...

  12. Surface viscosity effects on the motion of self-propelling boat in a channel

    Science.gov (United States)

    Aliperio, M. G.; Nolan Confesor, Mark

    2015-06-01

    Self-propelled droplets have been conceived as simple chemical toy models to mimic motile biological samples such as bacteria. The motion of these droplets is believe to be due to the surface tension gradient in the boundary of the droplet. We performed experiments to look at the effect of varying the medium viscosity to the speed of a circular boat that was soaked in Pentanol. We found that the boats undergo oscillatory type of motion inside a channel. Moreover we found the maximum speed of the boat is independent on the viscosity of the medium. On the other a time scale describing the width of the velocity profile of the boat was found to increase with increasing viscosity.

  13. Two-Dimensional Self-Propelled Fish Motion in Medium: An Integrated Method for Deforming Body Dynamics and Unsteady Fluid Dynamics

    International Nuclear Information System (INIS)

    Yan, Yang; Yong-Liang, Yu; Bing-Gang, Tong; Guan-Hao, Wu

    2008-01-01

    We present (1) the dynamical equations of deforming body and (2) an integrated method for deforming body dynamics and unsteady fluid dynamics, to investigate a modelled freely self-propelled fish. The theoretical model and practical method is applicable for studies on the general mechanics of animal locomotion such as flying in air and swimming in water, particularly of free self-propulsion. The present results behave more credibly than the previous numerical studies and are close to the experimental results, and the aligned vortices pattern is discovered in cruising swimming

  14. Offshore concrete structures; Estructuras Offshore (mar adentro) de Hormigon

    Energy Technology Data Exchange (ETDEWEB)

    Lamas Pardo, M.; Carral Couce, L. M.

    2011-07-01

    In the offshore industry there are two possible materials for the construction of the hull of a structure; the steel and concrete, with the first one widely used until now, as in the rest of the shipbuilding industry of merchant ships, warships, etc. Materials such as aluminum, GRP or timber areused in small units with lengths lower than 100 m, and in less adverse conditions than in the offshore industry. Nevertheless, some ships/barges have been built of concrete in the past, but have been rather isolated cases which have not changed the practice in the industry. In the First and Second World War were built by the scarcity of materials, while the series of barges by Alfred A. Yee was a rare exception. Other units were also made in concrete, but almost anecdotal. Still, the behaviour of these concrete structures, especially in terms of maintenance, has been excellent. Therefore, the fact that the concrete has not had an adequate reception so far in shipbuilding, does not mean that in will not be the material best suited for the offshore industry in the future. The extra displacement and associated fuel costs in concrete ships have been found prohibitive in the past. But the loss of mobility of a concrete hull in relation to a steel hull can be perfectly offset by the advantages offered by the concrete, as the shipping and offshore industry have very different priorities. One of the main differences in these priorities is in terms of maintenance and resistance to fatigue, precisely where the concrete performs better. ships can easily be dry docked for maintenance and repair, while in the offshore platforms these works have to be done in situ so maintenance and fatigue are crucial to them. Besides these, the concrete has other advantages according to findings of several studies. And although they are interested in the conclusions that the makes as they came from people in the concrete industry, the fact that in recent years concrete offshore unit shave been built

  15. Fabrication of Propeller-Shaped Supra-amphiphile for Construction of Enzyme-Responsive Fluorescent Vesicles.

    Science.gov (United States)

    Li, Jie; Liu, Kaerdun; Han, Yuchun; Tang, Ben Zhong; Huang, Jianbin; Yan, Yun

    2016-10-04

    Propeller-shaped molecules have been recognized to display fantastic AIE (aggregation induced emission), but they can hardly self-assemble into nanostructures. Herein, we for the first time report that ionic complexation between a water-soluble tetrapheneyl derivative and an enzyme substrate in aqueous media produces a propeller-shaped supra-amphiphile that self-assembles into enzyme responsive fluorescent vesicles. The supra-amphiphile was fabricated upon complexation between a water-soluble propeller-shaped AIE luminogen TPE-BPA and myristoylcholine chloride (MChCl) in aqueous media. MChCl filled in the intramolecular voids of propeller-shaped TPE-BPA upon supra-amphiphile formation, which endows the supra-amphiphile superior self-assembling ability to the component molecules thus leading to the formation of fluorescent vesicles. Because MChCl is the substrate of cholinesterases, the vesicles dissemble in the presence of cholinesterases, and the fluorescent intensity can be correlated to the level of enzymes. The resulting fluorescent vesicles may be used to recognize the site of Alzheimer's disease, to encapsulate the enzyme inhibitor, and to release the inhibitor at the disease site.

  16. Curvature-induced microswarming and clustering of self-propelled particles

    Science.gov (United States)

    Bruss, Isaac; Glotzer, Sharon

    Non-equilibrium active matter systems exhibit many unique phenomena, such as motility-induced phase separation and swarming. However, little is known about how these behaviors depend on the geometry of the environment. To answer this question, we use Brownian dynamics simulations to study the effects of Gaussian curvature on self-propelled particles by confining them to the surface of a sphere. We find that a modest amount of curvature promotes phase separation by altering the shape of a cluster's boundary. Alternatively, particles on surfaces of high curvature experience reduced phase separation and instead form microswarms, where particles share a common orbit. We show that this novel flocking behavior is distinct from other previously studied examples, in that it is not explicitly incorporated into our model through Vicsek-like alignment rules nor torques. Rather, we find that microswarms emerge solely due to the geometric link between orientation and velocity, a property exclusive to surfaces with non-zero Gaussian curvature. These findings reveal the important role of local environment on the global emergent behavior of non-equilibrium systems. Center for Bio-Inspired Engineering (DOE Award # DE-SC0000989).

  17. Self-management of self-organising mobile computing applications : a separation of concerns approach

    OpenAIRE

    Fernandez Marquez, Jose Luis; di Marzo Serugendo, Giovanna; Stevenson, Graeme Turnbull; Ye, Juan; Dobson, Simon Andrew; Zamonelli, Franco

    2014-01-01

    Although the research area of self-organising systems is well established, their construction is often ad hoc. Consequently, such software is difficult reuse across applications that require similar functionality of have similar goals. The development of self-organising applications and, a fortiori, self-organising mobile applications is therefore limited to developers who are experts in specific self-organising mechanisms. As a first step towards addressing this, this paper discusses the not...

  18. Content Analysis of Diet-Related Mobile Apps: A Self-Regulation Perspective.

    Science.gov (United States)

    Zahry, Nagwan R; Cheng, Ying; Peng, Wei

    2016-10-01

    Diet-related mobile apps hold promise in helping individuals self-regulate their eating behaviors. Nevertheless, little is known about the extent to which diet-related mobile apps incorporate the established behavior change theories and evidence-based practices that promote dietary self-regulation. Guided by the self-regulation aspect of Bandura's social cognitive theory and the Dietary Guidelines for Americans 2010 of the U.S. Department of Agriculture, this study conducts a content analysis of diet-related mobile apps for iPhone (N = 400). In terms of the adherence to the self-regulation aspect of the social cognitive theory, results show that although 72.5% of the apps incorporate at least one theoretical construct, few apps tap all three processes of self-regulation (i.e., self-observation/monitoring, judgment process, and self-reaction). Additionally, outcome expectation is manifested in a majority of the diet-related apps. In terms of the Dietary Guidelines for Americans 2010, while the diet-related apps equally emphasize setting goals for calorie intake or nutrient consumption, more apps feature nutrient tracking than calorie tracking. Implications and limitations are discussed.

  19. Hysteresis, reentrance, and glassy dynamics in systems of self-propelled rods.

    Science.gov (United States)

    Kuan, Hui-Shun; Blackwell, Robert; Hough, Loren E; Glaser, Matthew A; Betterton, M D

    2015-01-01

    Nonequilibrium active matter made up of self-driven particles with short-range repulsive interactions is a useful minimal system to study active matter as the system exhibits collective motion and nonequilibrium order-disorder transitions. We studied high-aspect-ratio self-propelled rods over a wide range of packing fractions and driving to determine the nonequilibrium state diagram and dynamic properties. Flocking and nematic-laning states occupy much of the parameter space. In the flocking state, the average internal pressure is high and structural and mechanical relaxation times are long, suggesting that rods in flocks are in a translating glassy state despite overall flock motion. In contrast, the nematic-laning state shows fluidlike behavior. The flocking state occupies regions of the state diagram at both low and high packing fraction separated by nematic-laning at low driving and a history-dependent region at higher driving; the nematic-laning state transitions to the flocking state for both compression and expansion. We propose that the laning-flocking transitions are a type of glass transition that, in contrast to other glass-forming systems, can show fluidization as density increases. The fluid internal dynamics and ballistic transport of the nematic-laning state may promote collective dynamics of rod-shaped micro-organisms.

  20. Ordering dynamics of self-propelled particles in an inhomogeneous medium

    Science.gov (United States)

    Das, Rakesh; Mishra, Shradha; Puri, Sanjay

    2018-02-01

    Ordering dynamics of self-propelled particles in an inhomogeneous medium in two dimensions is studied. We write coarse-grained hydrodynamic equations of motion for density and polarisation fields in the presence of an external random disorder field, which is quenched in time. The strength of inhomogeneity is tuned from zero disorder (clean system) to large disorder. In the clean system, the polarisation field grows algebraically as LP ∼ t0.5 . The density field does not show clean power-law growth; however, it follows Lρ ∼ t0.8 approximately. In the inhomogeneous system, we find a disorder-dependent growth. For both the density and the polarisation, growth slows down with increasing strength of disorder. The polarisation shows a disorder-dependent power-law growth LP(t,Δ) ∼ t1/\\bar zP(Δ) for intermediate times. At late times, there is a crossover to logarithmic growth LP(t,Δ) ∼ (\\ln t)1/\\varphi , where φ is a disorder-independent exponent. Two-point correlation functions for the polarisation show dynamical scaling, but the density does not.

  1. Exploring Kupffer's Vescicle Through Self Propelled Particle Simulations

    Science.gov (United States)

    Lundy, Kassidy; Dasgupta, Agnik; Amack, Jeff; Manning, M. Lisa

    Early development is an important stage in the formation of functional, relatively healthy organisms. In zebrafish embryos, a transient organ in the tailbud called Kupffer's Vescicle (KV) is responsible for the initial left-right (L-R) asymmetry that results in asymmetric organ and tissue placement in the adult zebrafish. Originating as a collection of symmetrically organized monociliated cells, the KV experiences a shift in cell shapes over time that leaves more cells on the anterior or top side of the KV. This arrangement helps to generate a stronger counter-clockwise fluid flow across the anterior side of the organ, which is required for L-R asymmetry. In seeking to understand the source of the shape changes occurring within the KV, we simulate a Self Propelled Particle (SPP) model that includes parameters for cell polarization and speed. We model the KV as a large particle moving in a straight line with constant velocity to mimic the physical forces of the notochord acting on this organ, and we model the surrounding tailbud cells as smaller, slower active particles with an orientation that changes over time due to rotational noise. Our goal is to calculate the forces exerted on the KV by the surrounding tissue, to see if they are sufficient to explain the shape changes we observe in the KV that lead to L-R asymmetry.

  2. An international prospective cohort study of mobile phone users and health (COSMOS): Factors affecting validity of self-reported mobile phone use.

    Science.gov (United States)

    Toledano, Mireille B; Auvinen, Anssi; Tettamanti, Giorgio; Cao, Yang; Feychting, Maria; Ahlbom, Anders; Fremling, Karin; Heinävaara, Sirpa; Kojo, Katja; Knowles, Gemma; Smith, Rachel B; Schüz, Joachim; Johansen, Christoffer; Poulsen, Aslak Harbo; Deltour, Isabelle; Vermeulen, Roel; Kromhout, Hans; Elliott, Paul; Hillert, Lena

    2018-01-01

    This study investigates validity of self-reported mobile phone use in a subset of 75 993 adults from the COSMOS cohort study. Agreement between self-reported and operator-derived mobile call frequency and duration for a 3-month period was assessed using Cohen's weighted Kappa (κ). Sensitivity and specificity of both self-reported high (≥10 calls/day or ≥4h/week) and low (≤6 calls/week or phone use were calculated, as compared to operator data. For users of one mobile phone, agreement was fair for call frequency (κ=0.35, 95% CI: 0.35, 0.36) and moderate for call duration (κ=0.50, 95% CI: 0.49, 0.50). Self-reported low call frequency and duration demonstrated high sensitivity (87% and 76% respectively), but for high call frequency and duration sensitivity was lower (38% and 56% respectively), reflecting a tendency for greater underestimation than overestimation. Validity of self-reported mobile phone use was lower in women, younger age groups and those reporting symptoms during/shortly after using a mobile phone. This study highlights the ongoing value of using self-report data to measure mobile phone use. Furthermore, compared to continuous scale estimates used by previous studies, categorical response options used in COSMOS appear to improve validity considerably, most likely by preventing unrealistically high estimates from being reported. Copyright © 2017 Elsevier GmbH. All rights reserved.

  3. Micromotor-Based Biomimetic Carbon Dioxide Sequestration: Towards Mobile Microscrubbers.

    Science.gov (United States)

    Uygun, Murat; Singh, Virendra V; Kaufmann, Kevin; Uygun, Deniz A; de Oliveira, Severina D S; Wang, Joseph

    2015-10-26

    We describe a mobile CO2 scrubbing platform that offers a greatly accelerated biomimetic sequestration based on a self-propelled carbonic anhydrase (CA) functionalized micromotor. The CO2 hydration capability of CA is coupled with the rapid movement of catalytic micromotors, and along with the corresponding fluid dynamics, results in a highly efficient mobile CO2 scrubbing microsystem. The continuous movement of CA and enhanced mass transport of the CO2 substrate lead to significant improvements in the sequestration efficiency and speed over stationary immobilized or free CA platforms. This system is a promising approach to rapid and enhanced CO2 sequestration platforms for addressing growing concerns over the buildup of greenhouse gas. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Morphology of clusters of attractive dry and wet self-propelled spherical particle suspensions.

    Science.gov (United States)

    Alarcón, Francisco; Valeriani, Chantal; Pagonabarraga, Ignacio

    2017-01-25

    In order to assess the effect of hydrodynamics in the assembly of active attractive spheres, we simulate a semi-dilute suspension of attractive self-propelled spherical particles in a quasi-two dimensional geometry comparing the case with and without hydrodynamics interactions. To start with, independent of the presence of hydrodynamics, we observe that depending on the ratio between attraction and propulsion, particles either coarsen or aggregate forming finite-size clusters. Focusing on the clustering regime, we characterize two different cluster parameters, i.e. their morphology and orientational order, and compare the case when active particles behave either as pushers or pullers (always in the regime where inter-particle attractions compete with self-propulsion). Studying cluster phases for squirmers with respect to those obtained for active Brownian disks (indicated as ABPs), we have shown that hydrodynamics alone can sustain a cluster phase of active swimmers (pullers), while ABPs form cluster phases due to the competition between attraction and self-propulsion. The structural properties of the cluster phases of squirmers and ABPs are similar, although squirmers show sensitivity to active stresses. Active Brownian disks resemble weakly pusher squirmer suspensions in terms of cluster size distribution, structure of the radius of gyration on the cluster size and degree of cluster polarity.

  5. Modern earthquake engineering offshore and land-based structures

    CERN Document Server

    Jia, Junbo

    2017-01-01

    This book addresses applications of earthquake engineering for both offshore and land-based structures. It is self-contained as a reference work and covers a wide range of topics, including topics related to engineering seismology, geotechnical earthquake engineering, structural engineering, as well as special contents dedicated to design philosophy, determination of ground motions, shock waves, tsunamis, earthquake damage, seismic response of offshore and arctic structures, spatial varied ground motions, simplified and advanced seismic analysis methods, sudden subsidence of offshore platforms, tank liquid impacts during earthquakes, seismic resistance of non-structural elements, and various types of mitigation measures, etc. The target readership includes professionals in offshore and civil engineering, officials and regulators, as well as researchers and students in this field.

  6. Self-Employment Dynamics, State Dependence and Cross-Mobility Patterns

    OpenAIRE

    Caliendo, Marco; Uhlendorff, Arne

    2008-01-01

    This paper analyzes the mobility between self-employment, wage employment and non-employment. Using data for men in West Germany, we find strong true state dependence in all three states. Moreover, compared to wage employment, non-employment increases the probability of self-employment significantly, and self-employment goes along with a higher risk of future non-employment.

  7. An advanced GAP/AN/TAGN propellant : part 2 : stability and storage life

    Energy Technology Data Exchange (ETDEWEB)

    Judge, M.D. [Bristol Aerospace, Winnipeg, MB (Canada); Badeen, C.M.; Jones, D.E.G. [Natural Resources Canada, Ottawa, ON (Canada). Canadian Explosives Research Laboratory

    2007-07-15

    An advanced solid propellant was characterized. The propellant was based on a glycidyl azide polymer (GAP) energetic binder with an ammonium nitrate (AN) oxidizer, and contained a significant percentage of triaminoguanidine nitrate (TAGN). Raw ingredient accelerating rate calorimetry (ARC) was performed to determine self-heating rates. Thermal stability and heat flow calorimetry tests were also conducted. Ballistic analyses were conducted to determine the propellant's burn rate. The propellant was designed to produce non-toxic and non-acidic exhaust products. Results of the tests indicated that the propellant is safe for prolonged storage. The study demonstrated that propellant samples can be heated to temperatures up to 175 degrees C for several hours without combustion response. A mass loss of 62 per cent was observed at temperatures between 160 and 230 degrees C. The samples ignited almost immediately after being placed in a pre-heated block at temperatures higher than 175 degrees C. The propellant's burn rate was approximately twice that of standard AN propellants. The propellant will be further evaluated as a candidate for the propulsion of tactical rockets and missiles. 17 refs., 4 tabs., 6 figs.

  8. Dynamic Symmetric Key Mobile Commerce Scheme Based on Self-Verified Mechanism

    Directory of Open Access Journals (Sweden)

    Jiachen Yang

    2014-01-01

    Full Text Available In terms of the security and efficiency of mobile e-commerce, the authors summarized the advantages and disadvantages of several related schemes, especially the self-verified mobile payment scheme based on the elliptic curve cryptosystem (ECC and then proposed a new type of dynamic symmetric key mobile commerce scheme based on self-verified mechanism. The authors analyzed the basic algorithm based on self-verified mechanisms and detailed the complete transaction process of the proposed scheme. The authors analyzed the payment scheme based on the security and high efficiency index. The analysis shows that the proposed scheme not only meets the high efficiency of mobile electronic payment premise, but also takes the security into account. The user confirmation mechanism at the end of the proposed scheme further strengthens the security of the proposed scheme. In brief, the proposed scheme is more efficient and practical than most of the existing schemes.

  9. Medical status of the offshore population

    Energy Technology Data Exchange (ETDEWEB)

    Coleshaw, S.R.K.; Harris, R.A.

    1998-06-01

    The offshore workforce are generally considered to be a healthy occupational group due to regular medical screening, a degree of health surveillance, self-selection, and an increasing number of health promotion programmes being run both onshore and offshore. That said, factors such as the increasing age of the workforce, the often poor lifestyle and the sometimes difficult psychosocial environment remain areas of concern when considering the physical and mental well-being of the workforce. The medical status of offshore workers was investigated by surveying the information collected during the medical screening process, over a cross-section of the population assessed by an independent health service provider. Demographic information, medical history and the results of medical examination were entered into a relational database, to allow analysis and interrogation of the data. (UK)

  10. Effect of Propellant Composition to the Temperature Sensitivity of Composite Propellant

    International Nuclear Information System (INIS)

    Aziz, Amir; Mamat, Rizalman; Amin, Makeen; Wan Ali, Wan Khairuddin

    2012-01-01

    The propellant composition is one of several parameter that influencing the temperature sensitivity of composite propellant. In this paper, experimental investigation of temperature sensitivity in burning rate of composite propellant was conducted. Four sets of different propellant compositions had been prepared with the combination of ammonium perchlorate (AP) as an oxidizer, aluminum (Al) as fuel and hydroxy-terminated polybutadiene (HTPB) as fuel and binder. For each mixture, HTPB binder was fixed at 15% and cured with isophorone diisocyanate (IPDI). By varying AP and Al, the effect of oxidizer- fuel mixture ratio (O/F) on the whole propellant can be determined. The propellant strands were manufactured using compression molded method and burnt in a strand burner using wire technique over a range of pressure from 1 atm to 31 atm. The results obtained shows that the temperature sensitivity, a, increases with increasing O/F. Propellant p80 which has O/F ratio of 80/20 gives the highest value of temperature sensitivity which is 1.687. The results shows that the propellant composition has significant effect on the temperature sensitivity of composite propellant

  11. Dynamic analysis and design of offshore structures

    CERN Document Server

    Chandrasekaran, Srinivasan

    2015-01-01

    This book  attempts to provide readers with an overall idea of various types of offshore platform geometries. It covers the various environmental loads encountered by these structures, a detailed description of the fundamentals of structural dynamics in a class-room style, estimate of damping in offshore structures and their applications in the preliminary analysis and design. Basic concepts of structural dynamics are emphasized through simple illustrative examples and exercises. Design methodologies and guidelines, which are FORM based concepts are explained through a few applied example structures. Each chapter also has tutorials and exercises for self-learning. A dedicated chapter on stochastic dynamics will help the students to extend the basic concepts of structural dynamics to this advanced domain of research. Hydrodynamic response of offshore structures with perforated members is one of the recent research applications, which is found to be one of the effective manner of retrofitting offshore structur...

  12. Analysis of propeller-induced ground vortices by particle image velocimetry

    NARCIS (Netherlands)

    Yang, Y.; Sciacchitano, A.; Veldhuis, L.L.M.; Eitelberg, G.

    2017-01-01

    Abstract: The interaction between a propeller and its self-induced vortices originating on the ground is investigated in a scaled experiment. The velocity distribution in the flow field in two different planes containing the self-induced vortices is measured by particle image velocimetry (PIV).

  13. A review of mobile apps for epilepsy self-management.

    Science.gov (United States)

    Escoffery, Cam; McGee, Robin; Bidwell, Jonathan; Sims, Christopher; Thropp, Eliana Kovitch; Frazier, Cherise; Mynatt, Elizabeth D

    2018-04-01

    Mobile health app developers increasingly are interested in supporting the daily self-care of people with chronic conditions. The purpose of this study was to review mobile applications (apps) to promote epilepsy self-management. It investigates the following: 1) the available mobile apps for epilepsy, 2) how these apps support patient education and self-management (SM), and 3) their usefulness in supporting management of epilepsy. We conducted the review in Fall 2017 and assessed apps on the Apple App Store that related to the terms "epilepsy" and "seizure". Inclusion criteria included apps (adult and pediatric) that, as follows, were: 1) developed for patients or the community; 2) made available in English, and 3) less than $5.00. Exclusion criteria included apps that were designed for dissemination of publications, focused on healthcare providers, or were available in other languages. The search resulted in 149 apps, of which 20 met the selection criteria. A team reviewed each app in terms of three sets of criteria: 1) epilepsy-specific descriptions and SM categories employed by the apps and 2) Mobile App Rating Scale (MARS) subdomain scores for reviewing engagement, functionality, esthetics, and information; and 3) behavioral change techniques. Most apps were for adults and free. Common SM domains for the apps were treatment, seizure tracking, response, and safety. A number of epilepsy apps existed, but many offered similar functionalities and incorporated few SM domains. The findings underline the need for mobile apps to cover broader domains of SM and behavioral change techniques and to be evaluated for outcomes. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Offshore concrete structures

    International Nuclear Information System (INIS)

    Lamas Pardo, M.; Carral Couce, L. M.

    2011-01-01

    In the offshore industry there are two possible materials for the construction of the hull of a structure; the steel and concrete, with the first one widely used until now, as in the rest of the shiphuidling industry of merchant ships, warships, etc. Materials such as aluminum, GRP or timber areused in small units with lengths lower than 100 m, and in less adverse conditions than in the offshore industry. Nevertheless, some ships/barges have been built of concrete in the past, but have been rather isolated cases which have not changed the practice in the industry. In the First and Second World War were built by the scarcity of materials, while the series of barges by Alfred A. Yee was a rare exception. Other units were also made in concrete, but almost anecdotal. Still, the behaviour of these concrete structures, especially in terms of maintenance, has been excellent. Therefore, the fact that the concrete has not had an adequate reception so far in shipbuilding, does not mean that in will not be the material best suited for the offshore industry in the future. The extra displacement and associated fuel costs in concrete ships have been found prohibitive in the past. But the loss of mobility of a concrete hull in relation to a steel hull can be perfectly offset by the advantages offered by the concrete, as the shipping and offshore industry have very different priorities. One of the main differences in these priorities is in terms of maintenance and resistance to fatigue, precisely where the concrete performs better. ships can easily be dry docked for maintenance and repair, while in the offshore platforms these works have to be done in situ so maintenance and fatigue are crucial to them. Besides these, the concrete has other advantages according to findings of several studies. And although they are interested in the conclusions that the makes as they came from people in the concrete industry, the fact that in recent years concrete offshore unit shave been built

  15. Integrated installation for offshore wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Way, J.; Bowerman, H.

    2003-07-01

    A project to investigate the feasibility of integrating the offshore installation of foundation, turbine and tower for offshore wind turbines into one operation is described. Three separate objectives are listed. They are: (1) Telescopic tower study - reversible process incorporating lift and lock mechanisms; (2) Transportation study - technical and economic feasibility of transporting and installing a wind turbine unit via a standard barge with minimal conversion and (3) Self-burial system study - to demonstrate the feasibility of self burial of a slab foundation via controlled jetting beneath the slab. The background to the study and the proposed concepts are discussed. The work carried out to date and the costs are reported together with the findings. Recommendations for future work are listed. The work was carried out by Corus UK Ltd and is managed by Future Energy Solutions for the DTI.

  16. Self-deployable mobile sensor networks for on-demand surveillance

    Science.gov (United States)

    Miao, Lidan; Qi, Hairong; Wang, Feiyi

    2005-05-01

    This paper studies two interconnected problems in mobile sensor network deployment, the optimal placement of heterogeneous mobile sensor platforms for cost-efficient and reliable coverage purposes, and the self-organizable deployment. We first develop an optimal placement algorithm based on a "mosaicked technology" such that different types of mobile sensors form a mosaicked pattern uniquely determined by the popularity of different types of sensor nodes. The initial state is assumed to be random. In order to converge to the optimal state, we investigate the swarm intelligence (SI)-based sensor movement strategy, through which the randomly deployed sensors can self-organize themselves to reach the optimal placement state. The proposed algorithm is compared with the random movement and the centralized method using performance metrics such as network coverage, convergence time, and energy consumption. Simulation results are presented to demonstrate the effectiveness of the mosaic placement and the SI-based movement.

  17. Towards biocompatible nano/microscale machines: self-propelled catalytic nanomotors not exhibiting acute toxicity

    Science.gov (United States)

    Khim Chng, Elaine Lay; Zhao, Guanjia; Pumera, Martin

    2014-01-01

    Recent advances in nanotechnology have led to the evolution of self-propelled, artificial nano/microjet motors. These intelligent devices are considered to be the next generation self-powered drug delivery system in the field of biomedical applications. While many studies have strived to further improve the various properties of these devices such as their efficiency, performance and power, little attention has been paid to the actual biocompatibility of nanojets in vivo. In this paper, we will present for the first time the investigation of the toxicity effects of nanojets on the viability of human lung epithelial cells (A549 cells). From the 24 h and 48 h post-exposure studies, it is clearly shown that the nanojets we used in our work has negligible influence on the cell viability across all the concentrations tested. As such, the toxicity profile of our nanojets have been shown to be neither dose- nor time-dependent. This is strongly indicative of the benign nature of our nanojets, which is of paramount significance as it is the first step towards the applications of nano/micromotors in real-world practical medical devices.

  18. White matter volume mediates the relationship between self-efficacy and mobility in older women

    Science.gov (United States)

    Nagamatsu, Lindsay S.; Hsu, Chun Liang; Davis, Jennifer C.; Best, John R.; Liu-Ambrose, Teresa

    2017-01-01

    Background With our aging population, understanding determinants of healthy aging is a priority. One essential component of healthy aging is mobility. While self-efficacy can directly impact mobility in older adults, it is unknown what role brain health may play in this relationship. Methods We conducted a cross-sectional pilot analysis of community-dwelling women (n = 80, mean age = 69 years) to examine whether brain volume mediates the relationship between falls-related self-efficacy, as measured by the Activities-specific Balance Confidence (ABC) scale, and mobility, as measured by the Timed Up and Go (TUG) test. Age, depression, education, functional comorbidities, and Montreal Cognitive Assessment (MoCA) were included in the model as covariates. Results We report that total white matter volume, specifically, significantly mediates the relationship between self-efficacy and mobility, where higher self-efficacy was associated with greater white matter volume (r=0.28), which in turn, was associated with better mobility (r=−0.30). Conclusions Our pilot study extends our understanding of the psychosocial and neurological factors that contribute to mobility, and provides insight into effective strategies that may be used to improve functional independence among older adults. Future prospective and intervention studies are required to further elucidate the nature of the relationship between self-efficacy, mobility, and brain health. PMID:27749206

  19. Tip-modified Propellers

    DEFF Research Database (Denmark)

    Andersen, Poul

    1999-01-01

    The paper deals with tip-modified propellers and the methods which, over a period of two decades, have been applied to develop such propellers. The development is driven by the urge to increase the efficiency of propellers and can be seen as analogous to fitting end plates and winglets to aircraft...... propeller, have efficiency increases of a reasonable magnitude in both open-water and behind-ship conditions....

  20. Sociable mobile robots through self-maintained energy

    DEFF Research Database (Denmark)

    Ngo, Trung Dung; Schiøler, Henrik

    2006-01-01

    society, collecting and sharing are experimentally recognized as the highest property. This paper issues an approach to sociable robots using self-maintained energy in robot society, which is naturally inspired from swarm behavior of honey-bee and ant. Typically, autonomous mobile robots are usually......Research of sociable robots has emphasized interaction and coordination of mobile robots with inspiration from natural behavior of birds, insects, and fish: flocking, foraging, collecting, sharing and so forth. However, the animal behaviors are looking for food towards survival. In an animal...... equipped with a finite energy, thus they can operate in a finite time. To overcome the limitation, we describe practical deployment of a group of mobile robot with the possibility of carrying and exchanging fuel, e.g. battery to other robots. Early implementation that includes modular hardware and control...

  1. Suppressing turbulence of self-propelling rods by strongly coupled passive particles.

    Science.gov (United States)

    Su, Yen-Shuo; Wang, Hao-Chen; I, Lin

    2015-03-01

    The strong turbulence suppression, mainly for large-scale modes, of two-dimensional self-propelling rods, by increasing the long-range coupling strength Γ of low-concentration passive particles, is numerically demonstrated. It is found that large-scale collective rod motion in forms of swirls or jets is mainly contributed from well-aligned dense patches, which can push small poorly aligned rod patches and uncoupled passive particles. The more efficient momentum transfer and dissipation through increasing passive particle coupling leads to the formation of a more ordered and slowed down network of passive particles, which competes with coherent dense active rod clusters. The frustration of active rod alignment ordering and coherent motion by the passive particle network, which interrupt the inverse cascading of forming large-scale swirls, is the key for suppressing collective rod motion with scales beyond the interpassive distance, even in the liquid phase of passive particles. The loosely packed active rods are weakly affected by increasing passive particle coupling due to the weak rod-particle interaction. They mainly contribute to the small-scale modes and high-speed motion.

  2. Lake Michigan Offshore Wind Feasibility Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Boezaart, Arnold [GVSU; Edmonson, James [GVSU; Standridge, Charles [GVSU; Pervez, Nahid [GVSU; Desai, Neel [University of Michigan; Williams, Bruce [University of Delaware; Clark, Aaron [GVSU; Zeitler, David [GVSU; Kendall, Scott [GVSU; Biddanda, Bopi [GVSU; Steinman, Alan [GVSU; Klatt, Brian [Michigan State University; Gehring, J. L. [Michigan State University; Walter, K. [Michigan State University; Nordman, Erik E. [GVSU

    2014-06-30

    The purpose of this project was to conduct the first comprehensive offshore wind assessment over Lake Michigan and to advance the body of knowledge needed to support future commercial wind energy development on the Great Lakes. The project involved evaluation and selection of emerging wind measurement technology and the permitting, installation and operation of the first mid-lake wind assessment meteorological (MET) facilities in Michigan’s Great Lakes. In addition, the project provided the first opportunity to deploy and field test floating LIDAR and Laser Wind Sensor (LWS) technology, and important research related equipment key to the sitting and permitting of future offshore wind energy development in accordance with public participation guidelines established by the Michigan Great Lakes Wind Council (GLOW). The project created opportunities for public dialogue and community education about offshore wind resource management and continued the dialogue to foster Great Lake wind resource utilization consistent with the focus of the GLOW Council. The technology proved to be effective, affordable, mobile, and the methods of data measurement accurate. The public benefited from a substantial increase in knowledge of the wind resources over Lake Michigan and gained insights about the potential environmental impacts of offshore wind turbine placements in the future. The unique first ever hub height wind resource assessment using LWS technology over water and development of related research data along with the permitting, sitting, and deployment of the WindSentinel MET buoy has captured public attention and has helped to increase awareness of the potential of future offshore wind energy development on the Great Lakes. Specifically, this project supported the acquisition and operation of a WindSentinel (WS) MET wind assessment buoy, and associated research for 549 days over multiple years at three locations on Lake Michigan. Four research objectives were defined for the

  3. Simulations of the DARPA Suboff Submarine Including Self-Propulsion with the E1619 Propeller

    Science.gov (United States)

    2012-01-01

    Young and Kinnas (2003) to evaluate supercavitating and surface-piercing propellers. The simulation’s predicted results compare well with experimental...Young Y, Kinnas S. 2003. Analysis of supercavitating and surface-piercing propeller flows via BEM. Comput. Mech. 32, 269-280. Yu-cun P, Huai-xin Z

  4. Relational mobility explains between- and within-culture differences in self-disclosure to close friends.

    Science.gov (United States)

    Schug, Joanna; Yuki, Masaki; Maddux, William

    2010-10-01

    In the current research, we tested a novel explanation for previously demonstrated findings that East Asians disclose less personal information to other people than do Westerners. We propose that both between- and within-culture differences in self-disclosure to close friends may be explained by the construct of relational mobility, the general degree to which individuals in a society have opportunities to form new relationships and terminate old ones. In Study 1, we found that cross-cultural differences (Japan vs. United States) in self-disclosure to a close friend were mediated by individuals' perceptions of relational mobility. In Study 2, two separate measures of relational mobility predicted self-disclosure within a single culture (Japan), and this relationship was mediated by the motivation to engage in self-disclosure to strengthen personal relationships. We conclude that societies and social contexts higher in relational mobility (in which relationships can be formed and dissolved relatively easily) produce stronger incentives for self-disclosure as a social-commitment device.

  5. Enhancing self-care, adjustment and engagement through mobile phones in youth with HIV.

    Science.gov (United States)

    John, M E; Samson-Akpan, P E; Etowa, J B; Akpabio, I I; John, E E

    2016-12-01

    To evaluate the effectiveness of mobile phones in enhancing self-care, adjustment and engagement in non-disclosed youth living with HIV. Youth aged 15-24 years represent 42% of new HIV infections globally. Youth who are aware of their HIV status generally do not disclose it or utilize HIV-related facilities because of fear of stigma. They rely on the Internet for health maintenance information and access formal care only when immune-compromised and in crisis. This study shows how non-disclosed youth living with HIV can be reached and engaged for self-management and adjustment through mobile phone. One-group pre-test/post-test experimental design was used. Mobile phones were used to give information, motivation and counselling to 19 purposively recruited non-disclosed youth with HIV in Calabar, South-South Nigeria. Psychological adjustment scale, modified self-care capacity scale and patient activation measure were used to collect data. Data were analysed using PASW 18.0. Scores on self-care capacity, psychological adjustment and engagement increased significantly at post-test. HIV-related visits to health facilities did not improve significantly even at 6 months. Participants still preferred to consult healthcare providers for counselling through mobile phone. Mobile phone-based interventions are low cost, convenient, ensure privacy and are suitable for youth. Such remote health counselling enhances self-management and positive living. Mobile phones enhance self-care, psychological adjustment and engagement in non-disclosed youth living with HIV, and can be used to increase care coverage. Findings underline the importance of policies to increase access by locating, counselling and engaging HIV-infected youth in care. © 2016 International Council of Nurses.

  6. Mobile Apps for Self-Injury: A Content Analysis.

    Science.gov (United States)

    Vieira, Aaron M; Lewis, Stephen P

    2018-05-01

    A growing body of research points to the salience of the Internet and mobile material among individuals who self-injure. However, to date, no research has investigated the mobile apps related to nonsuicidal self-injury (NSSI). Such information would clarify which apps may be useful for those who self-injure while highlighting whether app-related content warrants improvement. The current study examined the content and usability of NSSI apps available on the two largest app-related platforms (Google Play and iTunes). Using content analysis, apps were examined regarding their content (e.g., presence of NSSI myths and types of coping strategies) as well as usability (e.g., app performance). Results indicate that NSSI apps have varied content, with few developed by, or affiliated with, a trusted source (e.g., university). NSSI apps tend to not propagate NSSI myths that vary with respect to the quality of coping strategies offered. They also tend to be rated favorably in terms of their usability. Overall, the present findings add to the NSSI literature and highlight several implications and avenues for future work, which are discussed.

  7. Evaluation of Flygt Propeller Mixers for Double-Shell Tank (DST) High Level Waste Auxiliary Solids Mobilization

    International Nuclear Information System (INIS)

    PACQUET, E.A.

    2000-01-01

    The River Protection Project (RPP) is planning to retrieve radioactive waste from the single-shell tanks (SST) and double-shell tanks (DST) underground at the Hanford Site. This waste will then be transferred to a waste treatment plant to be immobilized (vitrified) in a stable glass form. Over the years, the waste solids in many of the tanks have settled to form a layer of sludge at the bottom. The thickness of the sludge layer varies from tank to tank, from no sludge or a few inches of sludge to about 15 ft of sludge. The purpose of this technology and engineering case study is to evaluate the Flygt(trademark) submersible propeller mixer as a potential technology for auxiliary mobilization of DST HLW solids. Considering the usage and development to date by other sites in the development of this technology, this study also has the objective of expanding the knowledge base of the Flygt(trademark) mixer concept with the broader perspective of Hanford Site tank waste retrieval. More specifically, the objectives of this study delineated from the work plan are described

  8. Evaluation of Flygt Propeller Xixers for Double Shell Tank (DST) High Level Waste Auxiliary Solids Mobilization

    Energy Technology Data Exchange (ETDEWEB)

    PACQUET, E.A.

    2000-07-20

    The River Protection Project (RPP) is planning to retrieve radioactive waste from the single-shell tanks (SST) and double-shell tanks (DST) underground at the Hanford Site. This waste will then be transferred to a waste treatment plant to be immobilized (vitrified) in a stable glass form. Over the years, the waste solids in many of the tanks have settled to form a layer of sludge at the bottom. The thickness of the sludge layer varies from tank to tank, from no sludge or a few inches of sludge to about 15 ft of sludge. The purpose of this technology and engineering case study is to evaluate the Flygt{trademark} submersible propeller mixer as a potential technology for auxiliary mobilization of DST HLW solids. Considering the usage and development to date by other sites in the development of this technology, this study also has the objective of expanding the knowledge base of the Flygt{trademark} mixer concept with the broader perspective of Hanford Site tank waste retrieval. More specifically, the objectives of this study delineated from the work plan are described.

  9. Total recall in the SCAMP cohort: Validation of self-reported mobile phone use in the smartphone era.

    Science.gov (United States)

    Mireku, Michael O; Mueller, William; Fleming, Charlotte; Chang, Irene; Dumontheil, Iroise; Thomas, Michael S C; Eeftens, Marloes; Elliott, Paul; Röösli, Martin; Toledano, Mireille B

    2018-02-01

    Mobile phone use, predominantly smartphones, is almost ubiquitous amongst both adults and children. However adults and children have different usage patterns. A major challenge with research on mobile phone use is the reliability of self-reported phone activity for accurate exposure assessment. We investigated the agreement between self-reported mobile phone use data and objective mobile operator traffic data in a subset of adolescents aged 11-12 years participating in the Study of Cognition, Adolescents and Mobile Phones (SCAMP) cohort. We examined self-reported mobile phone use, including call frequency, cumulative call time duration and text messages sent among adolescents from SCAMP and matched these data with records provided by mobile network operators (n = 350). The extent of agreement between self-reported mobile phone use and mobile operator traffic data use was evaluated using Cohen's weighted Kappa (ĸ) statistics. Sensitivity and specificity of self-reported low ( 30min of call/day or ≥ 11 text messages sent /day) use were estimated. Agreement between self-reported mobile phone use and mobile operator traffic data was highest for the duration spent talking on mobile phones per day on weekdays (38.9%) and weekends (29.4%) compared to frequency of calls and number of text messages sent. Adolescents overestimated their mobile phone use during weekends compared to weekdays. Analysis of agreement showed little difference overall between the sexes and socio-economic groups. Weighted kappa between self-reported and mobile operator traffic data for call frequency during weekdays was κ = 0.12, 95% CI 0.06-0.18. Of the three modes of mobile phone use measured in the questionnaire, call frequency was the most sensitive for low mobile phone users on weekdays and weekends (77.1, 95% CI: 69.3-83.7 and 72.0, 95% CI: 65.0-78.4, respectively). Specificity was moderate to high for high users with the highest for call frequency during weekdays (98.4, 95% CI: 96

  10. Accessing offshoring advantages

    DEFF Research Database (Denmark)

    Mykhaylenko, Alona; Motika, Agnes; Wæhrens, Brian Vejrum

    2015-01-01

    . Assuming that different levels of synergy may exist between particular offshoring strategic decisions (choosing offshore outsourcing or captive offshoring and the type of function) and different offshoring advantages, this work advocates that the actual fact of realization of certain offshoring advantages...

  11. Emergency response in the Newfoundland offshore industry

    Energy Technology Data Exchange (ETDEWEB)

    Dempsey, J. [Cormorant Ltd., St. John' s, NL (Canada)

    2006-07-01

    This presentation reviewed current offshore oil activities with respect to safety issues regarding year-round marine operations in a harsh environment. Considerable logistics support is required for all offshore activities, including seismic and geotechnical surveys; exploration and production drilling; well testing; subsea construction; on-site production; and, delivery to market. Response to an offshore emergency must address the urgency of the incident along with stakeholder concerns. This presentation described the different types of emergencies and addressed issues regarding contingency planning; preventative measures; response philosophy; response scope; response at site; emergency management; communications links; and, oil spill response. The following current operations were highlighted: ExxonMobil's production drilling from the gravity-based concrete platform at Hibernia; Petro-Canada's production drilling at the Terra Nova FPSO; Husky Energy's production drilling at White Rose; and Chevron Canada's exploration drilling at the Orphan Basin. It was noted that in an emergency situation, the focus is on the welfare of offshore personnel. On an average day, the total offshore population is in the order of 1000 workers, all registered in the Personnel Logistics System which is updated with the departure of every helicopter from St. John's, Newfoundland or from the offshore platform. It is possible to prepare for foreseeable emergency incidents such as fire, explosion or gas leaks; spills to the marine environment; structural damage or collisions; persons lost at sea; helicopter or support vessel accidents; vessel sinking; sabotage; serious injuries or loss of life; severe ice events; and, loss of well control. The establishment of permanent safety zones at the Hibernia, White Rose and Terra Nova production fields are among the preventative measures, along with standby vessels that provide a rescue service for offshore installations

  12. Emergency response in the Newfoundland offshore industry

    International Nuclear Information System (INIS)

    Dempsey, J.

    2006-01-01

    This presentation reviewed current offshore oil activities with respect to safety issues regarding year-round marine operations in a harsh environment. Considerable logistics support is required for all offshore activities, including seismic and geotechnical surveys; exploration and production drilling; well testing; subsea construction; on-site production; and, delivery to market. Response to an offshore emergency must address the urgency of the incident along with stakeholder concerns. This presentation described the different types of emergencies and addressed issues regarding contingency planning; preventative measures; response philosophy; response scope; response at site; emergency management; communications links; and, oil spill response. The following current operations were highlighted: ExxonMobil's production drilling from the gravity-based concrete platform at Hibernia; Petro-Canada's production drilling at the Terra Nova FPSO; Husky Energy's production drilling at White Rose; and Chevron Canada's exploration drilling at the Orphan Basin. It was noted that in an emergency situation, the focus is on the welfare of offshore personnel. On an average day, the total offshore population is in the order of 1000 workers, all registered in the Personnel Logistics System which is updated with the departure of every helicopter from St. John's, Newfoundland or from the offshore platform. It is possible to prepare for foreseeable emergency incidents such as fire, explosion or gas leaks; spills to the marine environment; structural damage or collisions; persons lost at sea; helicopter or support vessel accidents; vessel sinking; sabotage; serious injuries or loss of life; severe ice events; and, loss of well control. The establishment of permanent safety zones at the Hibernia, White Rose and Terra Nova production fields are among the preventative measures, along with standby vessels that provide a rescue service for offshore installations. Supply vessels are also

  13. Dynamics calculation with variable mass of mountain self-propelled chassis

    Directory of Open Access Journals (Sweden)

    R.M. Makharoblidze

    2016-12-01

    Full Text Available Many technological processes in the field of agricultural production mechanization, such as a grain crop, planting root-tuber fruits, fertilizing, spraying and dusting, pressing feed materials, harvesting of various cultures, etc. are performed by the machine-tractor units with variable mass of links or processed media and materials. In recent years, are also developing the systems of automatic control, adjusting and control of technological processes and working members in agriculture production. Is studied the dynamics of transition processes of mountain self-propelled chassis with variable mass at real change disconnect or joining masses that is most often used in the function of movement (m(t = ctm(t = ct. Are derived the formulas of change of velocity of movement on displacement of unit and is defined the dependence of this velocity on the tractor and technological machine performance, with taking into account the gradual increase or removing of agricultural materials masses. According to the equation is possible to define a linear movement of machine-tractor unit. According to the obtained expressions we can define the basic operating parameters of machine-tractor unit with variable mass. The results of research would be applied at definition of characteristics of units, at development of new agricultural tractors.

  14. Wireless Magnetic-Based Closed-Loop Control of Self-Propelled Microjets

    Science.gov (United States)

    Khalil, Islam S. M.; Magdanz, Veronika; Sanchez, Samuel; Schmidt, Oliver G.; Misra, Sarthak

    2014-01-01

    In this study, we demonstrate closed-loop motion control of self-propelled microjets under the influence of external magnetic fields. We control the orientation of the microjets using external magnetic torque, whereas the linear motion towards a reference position is accomplished by the thrust and pulling magnetic forces generated by the ejecting oxygen bubbles and field gradients, respectively. The magnetic dipole moment of the microjets is characterized using the U-turn technique, and its average is calculated to be 1.310−10 A.m2 at magnetic field and linear velocity of 2 mT and 100 µm/s, respectively. The characterized magnetic dipole moment is used in the realization of the magnetic force-current map of the microjets. This map in turn is used for the design of a closed-loop control system that does not depend on the exact dynamical model of the microjets and the accurate knowledge of the parameters of the magnetic system. The motion control characteristics in the transient- and steady-states depend on the concentration of the surrounding fluid (hydrogen peroxide solution) and the strength of the applied magnetic field. Our control system allows us to position microjets at an average velocity of 115 m/s, and within an average region-of-convergence of 365 m. PMID:24505244

  15. An evaluation of krypton propellant in Hall thrusters

    Science.gov (United States)

    Linnell, Jesse Allen

    Due to its high specific impulse and low price, krypton has long sparked interest as an alternate Hall thruster propellant. Unfortunately at the moment, krypton's relatively poor performance precludes it as a legitimate option. This thesis presents a detailed investigation into krypton operation in Hall thrusters. These findings suggest that the performance gap can be decreased to 4% and krypton can finally become a realistic propellant option. Although krypton has demonstrated superior specific impulse, the xenon-krypton absolute efficiency gap ranges between 2 and 15%. A phenomenological performance model indicates that the main contributors to the efficiency gap are propellant utilization and beam divergence. Propellant utilization and beam divergence have relative efficiency deficits of 5 and 8%, respectively. A detailed characterization of internal phenomena is conducted to better understand the xenon-krypton efficiency gap. Krypton's large beam divergence is found to be related to a defocusing equipotential structure and a weaker magnetic field topology. Ionization processes are shown to be linked to the Hall current, the magnetic mirror topology, and the perpendicular gradient of the magnetic field. Several thruster design and operational suggestions are made to optimize krypton efficiency. Krypton performance is optimized for discharge voltages above 500 V and flow rates corresponding to an a greater than 0.015 mg/(mm-s), where alpha is a function of flow rate and discharge channel dimensions (alpha = m˙alphab/Ach). Performance can be further improved by increasing channel length or decreasing channel width for a given flow rate. Also, several magnetic field design suggestions are made to enhance ionization and beam focusing. Several findings are presented that improve the understanding of general Hall thruster physics. Excellent agreement is shown between equipotential lines and magnetic field lines. The trim coil is shown to enhance beam focusing

  16. Microstructure-mobility correlation in self-organised, conjugated polymer field-effect transistors

    DEFF Research Database (Denmark)

    Sirringhaus, H.; Brown, P.J.; Friend, R.H.

    2000-01-01

    We have investigated the correlation between polymer microstructure and charge carrier mobility in high-mobility, self-organised field-effect transistors of poly-3-hexyl-thiophene (P3HT). Two different preferential orientations of the microcrystalline P3HT domains with respect to the substrate have...

  17. Americans Still Overestimate Social Class Mobility: A Pre-Registered Self-Replication.

    Science.gov (United States)

    Kraus, Michael W

    2015-01-01

    Kraus and Tan (2015) hypothesized that Americans tend to overestimate social class mobility in society, and do so because they seek to protect the self. This paper reports a pre-registered exact replication of Study 3 from this original paper and finds, consistent with the original study, that Americans substantially overestimate social class mobility, that people provide greater overestimates when made while thinking of similar others, and that high perceived social class is related to greater overestimates. The current results provide additional evidence consistent with the idea that people overestimate class mobility to protect their beliefs in the promise of equality of opportunity. Discussion considers the utility of pre-registered self-replications as one tool for encouraging replication efforts and assessing the robustness of effect sizes.

  18. KAPPEL Propeller. Development of a Marine Propeller with Non-planar Lifting Surfaces

    DEFF Research Database (Denmark)

    Kappel, J.; Andersen, Poul

    2002-01-01

    The principle of non-planar lifting surfaces is applied to the design of modern aircraft wings to obtain better lift to drag ratios. Whereas a pronounced fin or "winglet" at the wingtip has been developed for aircraft, the application of the non-planar principle to marine propellers, dealt...... with in this paper, has led to the KAPPEL propeller with blades curved towards the suction side integrating the fin or winglet into the propeller blade. The combined theoretical, experimental and practical approach to develop and design marine propellers with non-planar lifting surfaces has resulted in propellers...

  19. Collective motion of groups of self-propelled particles following interacting leaders

    Science.gov (United States)

    Ferdinandy, B.; Ozogány, K.; Vicsek, T.

    2017-08-01

    In order to keep their cohesiveness during locomotion gregarious animals must make collective decisions. Many species boast complex societies with multiple levels of communities. A common case is when two dominant levels exist, one corresponding to leaders and the other consisting of followers. In this paper we study the collective motion of such two-level assemblies of self-propelled particles. We present a model adapted from one originally proposed to describe the movement of cells resulting in a smoothly varying coherent motion. We shall use the terminology corresponding to large groups of some mammals where leaders and followers form a group called a harem. We study the emergence (self-organization) of sub-groups within a herd during locomotion by computer simulations. The resulting processes are compared with our prior observations of a Przewalski horse herd (Hortobágy, Hungary) which we use as results from a published case study. We find that the model reproduces key features of a herd composed of harems moving on open ground, including fights for followers between leaders and bachelor groups (group of leaders without followers). One of our findings, however, does not agree with the observations. While in our model the emerging group size distribution is normal, the group size distribution of the observed herd based on historical data have been found to follow lognormal distribution. We argue that this indicates that the formation (and the size) of the harems must involve a more complex social topology than simple spatial-distance based interactions.

  20. A Social Potential Fields Approach for Self-Deployment and Self-Healing in Hierarchical Mobile Wireless Sensor Networks.

    Science.gov (United States)

    González-Parada, Eva; Cano-García, Jose; Aguilera, Francisco; Sandoval, Francisco; Urdiales, Cristina

    2017-01-09

    Autonomous mobile nodes in mobile wireless sensor networks (MWSN) allow self-deployment and self-healing. In both cases, the goals are: (i) to achieve adequate coverage; and (ii) to extend network life. In dynamic environments, nodes may use reactive algorithms so that each node locally decides when and where to move. This paper presents a behavior-based deployment and self-healing algorithm based on the social potential fields algorithm. In the proposed algorithm, nodes are attached to low cost robots to autonomously navigate in the coverage area. The proposed algorithm has been tested in environments with and without obstacles. Our study also analyzes the differences between non-hierarchical and hierarchical routing configurations in terms of network life and coverage.

  1. Americans Still Overestimate Social Class Mobility: A Pre-Registered Self-Replication

    Directory of Open Access Journals (Sweden)

    Michael W. Kraus

    2015-11-01

    Full Text Available Kraus and Tan (2015 hypothesized that Americans tend to overestimate social class mobility in society, and do so because they seek to protect the self. This paper reports a pre-registered exact replication of Study 3 from this original paper and finds, consistent with the original study, that Americans substantially overestimate social class mobility, that people provide greater overestimates when made while thinking of similar others, and that high perceived social class is related to greater overestimates. The current results provide additional evidence consistent with the idea that people overestimate class mobility to protect their beliefs in the promise of equality of opportunity. Discussion considers the utility of pre-registered self-replications as one tool for encouraging replication efforts and assessing the robustness of effect sizes.

  2. The influence of the choice of propeller design tool on propeller performance

    OpenAIRE

    Skåland, Edvard Knutsen

    2016-01-01

    In this master thesis different propeller design and analysis methods are presented and compared in terms of the accuracy and computational efficiency of their theory. These methods include lifting line, vortex lattice lifting surface and panel methods. A propeller design program based on lifting line theory was developed by the author. This program has been used together with the propeller design programs OpenProp and AKPD to make six propeller designs. The designs are based o...

  3. Analysis of the Induction and Wake Evolution of an Offshore Floating Wind Turbine

    Directory of Open Access Journals (Sweden)

    Matthew Lackner

    2012-04-01

    Full Text Available The degrees-of-freedom associated with offshore floating wind turbines (OFWTs result in a more dynamic flow field. The resulting aerodynamic loads may be significantly influenced by these motions via perturbations in the evolving wake. This is of great interest in terms of OFWT design, placement and simulation. This study presents free vortex wake method (FVM simulations of the NREL 5-MW wind turbine of a variety of platforms, operating in a range of wind speeds synthesized platform motion time series. Motion-induced wake perturbations are observed to affect induction. Transitions between windmill and propeller states are also observed.

  4. Nonequilibrium mode-coupling theory for dense active systems of self-propelled particles.

    Science.gov (United States)

    Nandi, Saroj Kumar; Gov, Nir S

    2017-10-25

    The physics of active systems of self-propelled particles, in the regime of a dense liquid state, is an open puzzle of great current interest, both for statistical physics and because such systems appear in many biological contexts. We develop a nonequilibrium mode-coupling theory (MCT) for such systems, where activity is included as a colored noise with the particles having a self-propulsion force f 0 and a persistence time τ p . Using the extended MCT and a generalized fluctuation-dissipation theorem, we calculate the effective temperature T eff of the active fluid. The nonequilibrium nature of the systems is manifested through a time-dependent T eff that approaches a constant in the long-time limit, which depends on the activity parameters f 0 and τ p . We find, phenomenologically, that this long-time limit is captured by the potential energy of a single, trapped active particle (STAP). Through a scaling analysis close to the MCT glass transition point, we show that τ α , the α-relaxation time, behaves as τ α ∼ f 0 -2γ , where γ = 1.74 is the MCT exponent for the passive system. τ α may increase or decrease as a function of τ p depending on the type of active force correlations, but the behavior is always governed by the same value of the exponent γ. Comparison with the numerical solution of the nonequilibrium MCT and simulation results give excellent agreement with scaling analysis.

  5. A Social Potential Fields Approach for Self-Deployment and Self-Healing in Hierarchical Mobile Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Eva González-Parada

    2017-01-01

    Full Text Available Autonomous mobile nodes in mobile wireless sensor networks (MWSN allow self-deployment and self-healing. In both cases, the goals are: (i to achieve adequate coverage; and (ii to extend network life. In dynamic environments, nodes may use reactive algorithms so that each node locally decides when and where to move. This paper presents a behavior-based deployment and self-healing algorithm based on the social potential fields algorithm. In the proposed algorithm, nodes are attached to low cost robots to autonomously navigate in the coverage area. The proposed algorithm has been tested in environments with and without obstacles. Our study also analyzes the differences between non-hierarchical and hierarchical routing configurations in terms of network life and coverage.

  6. Self-assembly and speed distributions of active granular particles

    Science.gov (United States)

    Sánchez, R.; Díaz-Leyva, P.

    2018-06-01

    The relationship between the dynamics of self-propelled systems and the self-assembly of structured clusters are studied via the experimental speed distributions of submonolayers of self-propelled granular particles. A distribution developed for non-self-propelled granular particles describes the speed distributions remarkably well, despite some of the assumptions behind its original derivation not being applicable. This is explained in terms of clustering and dissipation being the key phenomena governing this regime.

  7. Innovative boron nitride-doped propellants

    Directory of Open Access Journals (Sweden)

    Thelma Manning

    2016-04-01

    Full Text Available The U.S. military has a need for more powerful propellants with balanced/stoichiometric amounts of fuel and oxidants. However, balanced and more powerful propellants lead to accelerated gun barrel erosion and markedly shortened useful barrel life. Boron nitride (BN is an interesting potential additive for propellants that could reduce gun wear effects in advanced propellants (US patent pending 2015-026P. Hexagonal boron nitride is a good lubricant that can provide wear resistance and lower flame temperatures for gun barrels. Further, boron can dope steel, which drastically improves its strength and wear resistance, and can block the formation of softer carbides. A scalable synthesis method for producing boron nitride nano-particles that can be readily dispersed into propellants has been developed. Even dispersion of the nano-particles in a double-base propellant has been demonstrated using a solvent-based processing approach. Stability of a composite propellant with the BN additive was verified. In this paper, results from propellant testing of boron nitride nano-composite propellants are presented, including closed bomb and wear and erosion testing. Detailed characterization of the erosion tester substrates before and after firing was obtained by electron microscopy, inductively coupled plasma and x-ray photoelectron spectroscopy. This promising boron nitride additive shows the ability to improve gun wear and erosion resistance without any destabilizing effects to the propellant. Potential applications could include less erosive propellants in propellant ammunition for large, medium and small diameter fire arms.

  8. Integration of Wave and Offshore Wind Energy in a European Offshore Grid

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez; Sørensen, H. C.; Korpås, M.

    2010-01-01

    of offshore renewable energy sources. According to this, the paper covers i) public and private initiatives for offshore transmission networks, ii) the synergies between the wave and the offshore wind energy sector within an offshore grid, iii) power transmission options for offshore generation and iv...

  9. Contribution of mobile health applications to self-management by consumers: review of published evidence.

    Science.gov (United States)

    Anderson, Kevin; Emmerton, Lynne M

    2016-11-01

    Objective The aim of the present study was to review the contribution of mobile health applications ('apps') to consumers' self-management of chronic health conditions, and the potential for this practice to inform health policy, procedures and guidelines. Methods A search was performed on the MEDLINE, Cochrane Library, ProQuest and Global Health (Ovid) databases using the search terms 'mobile app*', 'self-care', 'self-monitoring', 'trial', 'intervention*' and various medical conditions. The search was supplemented with manual location of emerging literature and government reports. Mapping review methods identified relevant titles and abstracts, followed by review of content to determine extant research, reports addressing the key questions, and gaps suggesting areas for future research. Available studies were organised by disease state, and presented in a narrative analysis. Results Four studies describing the results of clinical trials were identified from Canada, England, Taiwan and Australia; all but the Australian study used custom-made apps. The available studies examined the effect of apps in health monitoring, reporting positive but not robust findings. Australian public policy and government reports acknowledge and support self-management, but do not address the potential contribution of mobile interventions. Conclusions There are limited controlled trials testing the contribution of health apps to consumers' self-management. Further evidence in this field is required to inform health policy and practice relating to self-management. What is known about the topic? Australian health policy encourages self-care by health consumers to reduce expenditure in health services. A fundamental component of self-care in chronic health conditions is self-monitoring, which can be used to assess progress towards treatment goals, as well as signs and symptoms of disease exacerbation. An abundance of mobile health apps is available for self-monitoring. What does this study

  10. Micro-structure-mobility correlation in self-organised, conjugated polymer field-effect transistors

    NARCIS (Netherlands)

    Sirringhaus, H.; Brown, P.J.; Friend, R.H.; Nielsen, M.M.; Bechgaard, K.; Langeveld-Voss, B.M.W.; Spiering, A.J.H.; Janssen, R.A.J.; Meijer, E.W.

    2000-01-01

    We have investigated the correlation between polymer microstructure and charge carrier mobility in high-mobility, self-organised field-effect transistors of poly-3-hexyl-thiophene (P3HT). Two different preferential orientations of the microcrystalline P3HT domains with respect to the substrate have

  11. The International Standards Organisation offshore structures standard

    International Nuclear Information System (INIS)

    Snell, R.O.

    1994-01-01

    The International Standards Organisation has initiated a program to develop a suite of ISO Codes and Standards for the Oil Industry. The Offshore Structures Standard is one of seven topics being addressed. The scope of the standard will encompass fixed steel and concrete structures, floating structures, Arctic structures and the site specific assessment of mobile drilling and accommodation units. The standard will use as base documents the existing recommended practices and standards most frequently used for each type of structure, and will develop them to incorporate best published and recognized practice and knowledge where it provides a significant improvement on the base document. Work on the Code has commenced under the direction of an internationally constituted sub-committee comprising representatives from most of the countries with a substantial offshore oil and gas industry. This paper outlines the background to the code and the format, content and work program

  12. Offshore Financial Centers in Global Capital Flow

    Directory of Open Access Journals (Sweden)

    Lutsyshyn Zoriana

    2017-12-01

    Full Text Available The article is dedicated to investigation of the place and role of offshore financial centers in financial globalization system, and of the reasons for using offshores in assets securitization mechanism. Numerous offshore and other preferential zones enabling to avoid the effective national and governmental tax regime are important attributes of global financial system and redistributive links of world financial flows. At present, around 70 countries and territories offer their offshore services for foreign capital, bank transactions, profitability from activities in financial markets proper. The global offshore business concentrates large amounts often having no relation to the country of origin, the so-called cosmopolitan capital (wandering. Although in the early 80's of the XXth century offshore companies were considered to control approximately 500 billion dollars, it was already in the early 90's that this amount doubled and was estimated as 1 trillion dollars. Today, from ⅓ to half of the world capital turnover goes through offshore business channels, and therefore, almost half of non-resident bank deposits are concentrated in world offshore centers. These are the world financial centers comprising international capital markets that provide for the accumulation and redistribution of world capital. From the process of reproduction (circulation of capital, the world financial centers plunge out the most homogeneous and mobile element — money, and freely manipulating with them, concentrate huge economic power in their hands. The role of world financial centers was also enhanced by the latest achievements in computer science, allowing execution of instant transactions and movement of huge amounts to any point of the world within the shortest possible time. The world financial centers consist not only of powerful banks and financial institutions operating on the international scene, but also have currency, stock and other exchanges as their

  13. Field evaluation of a self-propelled sprayer and effects of the application rate on spray deposition and losses to the ground in greenhouse tomato crops.

    Science.gov (United States)

    Sánchez-Hermosilla, Julián; Rincón, Víctor J; Páez, Francisco; Agüera, Francisco; Carvajal, Fernando

    2011-08-01

    In the greenhouses of south-eastern Spain, plant protection products are applied using mainly sprayers at high pressures and high volumes. This results in major losses on the ground and less than uniform spray deposition on the canopy. Recently, self-propelled vehicles equipped with vertical spray booms have appeared on the market. In this study, deposition on the canopy and the losses to the ground at different spray volumes have been compared, using a self-propelled vehicle with vertical spray booms versus a gun sprayer. Three different spray volumes have been tested with a boom sprayer, and two with a spray gun. The vehicle with the vertical spray boom gave similar depositions to those made with the gun, but at lower application volumes. Also, the distribution of the vertical spray boom was more uniform, with lower losses to the ground. The vertical spray booms used in tomato crops improve the application of plant protection products with respect to the spray gun, reducing the application volumes and the environmental risks of soil pollution. Copyright © 2011 Society of Chemical Industry.

  14. Wind power offshore - industrial possibilities for Norway; Vindkraft offshore - industrielle muligheter for Norge

    Energy Technology Data Exchange (ETDEWEB)

    Bysveen, S; Hoelseater, O H; Lier-Hansen, S; Hatlen, S; Soensteby, G. (Energiraadet, Oslo (Norway))

    2008-05-15

    The Europeans alteration of energy policy gives Norway a unique possibility to develop new business activity in the contractor industry as well as become a large exporter of renewable energy to Europe. Sea based wind power marks it self as the area with largest potential and is an area where Norway has a large advantage. This possibility is outlined in this report with offshore wind power as the foundation of business development and energy export to the continent

  15. Dietary assessment and self-monitoring with nutrition applications for mobile devices.

    Science.gov (United States)

    Lieffers, Jessica R L; Hanning, Rhona M

    2012-01-01

    Nutrition applications for mobile devices (e.g., personal digital assistants, smartphones) are becoming increasingly accessible and can assist with the difficult task of intake recording for dietary assessment and self-monitoring. This review is a compilation and discussion of research on this tool for dietary intake documentation in healthy populations and those trying to lose weight. The purpose is to compare this tool with conventional methods (e.g., 24-hour recall interviews, paper-based food records). Research databases were searched from January 2000 to April 2011, with the following criteria: healthy or weight loss populations, use of a mobile device nutrition application, and inclusion of at least one of three measures, which were the ability to capture dietary intake in comparison with conventional methods, dietary self-monitoring adherence, and changes in anthropometrics and/or dietary intake. Eighteen studies are discussed. Two application categories were identified: those with which users select food and portion size from databases and those with which users photograph their food. Overall, positive feedback was reported with applications. Both application types had moderate to good correlations for assessing energy and nutrient intakes in comparison with conventional methods. For self-monitoring, applications versus conventional techniques (often paper records) frequently resulted in better self-monitoring adherence, and changes in dietary intake and/or anthropometrics. Nutrition applications for mobile devices have an exciting potential for use in dietetic practice.

  16. Development and implementation of a propeller test capability for GL-10 "Greased Lightning" propeller design

    Science.gov (United States)

    Duvall, Brian Edward

    Interest in small unmanned aerial vehicles has increased dramatically in recent years. Hybrid vehicles which allow forward flight as a fixed wing aircraft and a true vertical landing capability have always had applications. Management of the available energy and noise associated with electric propeller propulsion systems presents many challenges. NASA Langley has developed the Greased Lightning 10 (GL-10) vertical takeoff, unmanned aerial vehicle with ten individual motors and propellers. All are used for propulsion during takeoff and contribute to acoustic noise pollution which is an identified nuisance to the surrounding users. A propeller test capability was developed to gain an understanding of how the noise can be reduced while meeting minimum thrust requirements. The designed propeller test stand allowed for various commercially available propellers to be tested for potential direct replacement of the current GL-10 propellers and also supported testing of a newly designed propeller provided by the Georgia Institute of Technology. Results from the test program provided insight as to which factors affect the noise as well as performance characteristics. The outcome of the research effort showed that the current GL-10 propeller still represents the best choice of all the candidate propellers tested.

  17. Effect of exercise-based cardiac rehabilitation on mobility and self-esteem of persons after cardiac surgery.

    Science.gov (United States)

    Ng, J Y; Tam, S F

    2000-08-01

    This study adopted an experimental design with using a nonequivalent, posttest only control group to study the rehabilitation outcomes of 152 persons who received cardiac surgery. 37 subjects in a rehabilitation group participated in a 2-mo. exercise-based cardiac rehabilitation programme, and another 115 subjects who did not attend the programme formed the control group. The subjects' self-esteem was measured on the Adult Source of Self-esteem Inventory by Elvoson and Fleming, and their mobility skill was measured by a simple mobility test based on New York Heart Association Classification. Analysis of covariance (with covariance analysis of the subjects' age, years of education, occupational skill, and mobility skill) indicated that the experimental group scored higher on positive self esteem and showed significantly better improvement in mobility skill. The exercise-based cardiac rehabilitation programme positively affected physical and psychological outcomes. Also, subjects' self-esteem was significantly correlated with their mobility skills (r=.21, p<.05) among those aged under 60 years (n=96) but not among those aged 60 or above (n=53).

  18. A Mobile Application for User Regulated Self-Assessments

    Science.gov (United States)

    Lazarinis, Fotis; Verykios, Vassilios S.; Panagiotakopoulos, Chris

    2017-01-01

    In this paper we present a mobile application for self-assessment. The work describes the main features of the application and focuses on its acceptance by students and the increase on their learning, through its usage in real testing settings. The application supports the retrieval of questions based on a number of criteria and it was evaluated…

  19. Characteristic Evaluation of a Shrouded Propeller Mechanism for a Magnetic Actuated Microrobot

    Directory of Open Access Journals (Sweden)

    Qiang Fu

    2015-09-01

    Full Text Available Medical microrobots have been widely used in clinical applications, particularly the spiral type locomotion mechanism, which was recently considered one of the main self-propelling mechanisms for the next medical microrobot to perform tasks such as capsule endoscopy and drug delivery. However, limits in clinical applications still exist. The spiral action of the microrobot while being used for diagnosis may lead to pain or even damage to the intestinal wall due to the exposed mechanisms. Therefore, a new locomotive mechanism, named the shrouded propeller mechanism, was proposed to achieve a high level of medical safety as well as effective propulsive performance in our study. The shrouded propeller mechanism consists of a bare spiral propeller and a non-rotating nozzle. To obtain a high effective propulsive performance, two types of screw grooves with different shapes including the cylindrical screw groove and the rectangular screw groove with different parameters were analyzed using the shrouded model. Two types of magnetic actuated microrobots with different driving modes, the electromagnetic (three-pole rotor actuated microrobot and the permanent magnet (O-ring type magnet actuated microrobot were designed to evaluate the performance of the electromagnetic actuation system. Based on experimental results, the propulsive force of the proposed magnetic actuated microrobot with a shrouded propeller was larger than the magnetic actuated microrobot with a bare spiral propeller under the same parameters. Additionally, the shrouded propeller mechanism as an actuator can be used for other medical microrobots for flexible locomotion.

  20. Occupational health offshore

    Energy Technology Data Exchange (ETDEWEB)

    Crosbie, A.; Davies, F.

    2002-07-01

    The proceedings contain the 29 papers presented at the conference plus the opening address from the chair of the Health and Safety Commission. The papers in the first session were concerned with policy, strategy and leadership and included a perspective from the offshore industry advisory committee, details of a health planning tool for occupational health assurance and lessons from occupational health management in the offshore sector. The two sessions on the second day dealt with occupational health in the offshore design process and case studies involving physical, chemical and biological agents. Topics included the need to consider occupational health when designing offshore installations, the development of a human factors engineering strategy in petrochemical engineering projects, measuring occupational exposure to hazardous chemicals, implementation of the noise at work regulations, hand arm vibration syndrome and issues with potable water maintenance. The two sessions on the third day were concerned with human factors and psychological health, and well-being and fitness for duty. Topics covered included circadian adaption to shift change in offshore shift workers, managing stress in the offshore environment, the role of employee assistance programmes in organisational stress management, health care and first aid (the revised ACOP), well-being at work, the medical and physical fitness of offshore emergency response rescue team members, the impact of health surveillance and promotion of offshore accident rates, and the implication of safety and heath of the aging of the workforce ion the Norwegian offshore industry.

  1. Offshoring Process

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Sørensen, Brian Vejrum; Katayama, Hiroshi

    2011-01-01

    The purpose of this chapter is to contribute to the knowledge on how production offshoring and international operations management vary across cultural contexts. The chapter attempts to shed light on how companies approach the process of offshoring in different cultural contexts. In order...... of globalisation. Yet there are clear differences in how offshoring is conducted in Denmark and Japan. The main differences are outlined in a framework and explained employing cultural variables. The findings lead to a number of propositions suggesting that the process of offshoring is not simply a uniform...... technical-rational calculation of the most efficient organisation of activities across national borders, but it is rather specific to the parent companies’ national contexts....

  2. Flow measurement around a model ship with propeller and rudder

    Energy Technology Data Exchange (ETDEWEB)

    Van, S H; Yoon, H S; Lee, Y Y; Park, I R [Korea Research Institute of Ships and Ocean Engineering, KORDI, Marine Transportation Systems Laboratory, Daejeon (Korea); Kim, W J [Mokpo National University, Department of Naval Architecture and Marine Engineering, Jeonnam (Korea)

    2006-04-15

    For the design of hull forms with better resistance and propulsive performance, it is essential to understand flow characteristics, such as wave and wake development, around a ship. Experimental data detailing the local flow characteristics are invaluable for the validation of the physical and numerical modeling of computational fluid dynamics (CFD) codes, which are recently gaining attention as efficient tools for hull form evaluation. This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138,000 m{sup 3} LNG carrier model with propeller and rudder. The effects of propeller and rudder on the wake and wave profiles in the stern region are clearly identified. The results contained in this paper can provide an opportunity to explore integrated flow phenomena around a model ship in the self-propelled condition, and can be added to the International Towing Tank Conference benchmark data for CFD validation as the previous KCS and KVLCC cases. (orig.)

  3. Flow measurement around a model ship with propeller and rudder

    Science.gov (United States)

    van, S. H.; Kim, W. J.; Yoon, H. S.; Lee, Y. Y.; Park, I. R.

    2006-04-01

    For the design of hull forms with better resistance and propulsive performance, it is essential to understand flow characteristics, such as wave and wake development, around a ship. Experimental data detailing the local flow characteristics are invaluable for the validation of the physical and numerical modeling of computational fluid dynamics (CFD) codes, which are recently gaining attention as efficient tools for hull form evaluation. This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138,000 m3 LNG carrier model with propeller and rudder. The effects of propeller and rudder on the wake and wave profiles in the stern region are clearly identified. The results contained in this paper can provide an opportunity to explore integrated flow phenomena around a model ship in the self-propelled condition, and can be added to the International Towing Tank Conference benchmark data for CFD validation as the previous KCS and KVLCC cases.

  4. Exploring gender differences on general and specific computer self-efficacy in mobile learning adoption

    OpenAIRE

    Bao, Yukun; Xiong, Tao; Hu, Zhongyi; Kibelloh, Mboni

    2014-01-01

    Reasons for contradictory findings regarding the gender moderate effect on computer self-efficacy in the adoption of e-learning/mobile learning are limited. Recognizing the multilevel nature of the computer self-efficacy (CSE), this study attempts to explore gender differences in the adoption of mobile learning, by extending the Technology Acceptance Model (TAM) with general and specific CSE. Data collected from 137 university students were tested against the research model using the structur...

  5. Accessing and operating agricultural machinery: Advancements in assistive technology for users with impaired mobility.

    Science.gov (United States)

    Ehlers, Shawn G; Field, William E

    2018-02-14

    This research focused on the advancements made in enabling agricultural workers with impaired mobility to access and operate off-road agricultural machinery. Although not a new concept, technological advancements in remote-controlled lifts, electronic actuators, electric over hydraulic controllers, and various modes of hand controls have advanced significantly, allowing operators with limited mobility to resume a high level of productivity in agricultural-related enterprises. In the United States, approximately 1.7% of the population is living with some form of paralysis or significant mobility impairment. When paired with the 2012 USDA Agriculture Census of 3.2 million farmers, it can be extrapolated that these technologies could impact 54,000 agricultural workers who have encountered disabling injuries or disease, which inhibit their ability to access and operate tractors, combines, and other self-propelled agricultural machines. Advancements in agricultural-specific technologies can allow for many of these individuals to regain the ability to effectively operate machinery once more.

  6. Propellers in Saturn's rings

    Science.gov (United States)

    Sremcevic, M.; Stewart, G. R.; Albers, N.; Esposito, L. W.

    2013-12-01

    Theoretical studies and simulations have demonstrated the effects caused by objects embedded in planetary rings. Even if the objects are too small to be directly observed, each creates a much larger gravitational imprint on the surrounding ring material. These strongly depend on the mass of the object and range from "S" like propeller-shaped structures for about 100m-sized icy bodies to the opening of circumferential gaps as in the case of the embedded moons Pan and Daphnis and their corresponding Encke and Keeler Gaps. Since the beginning of the Cassini mission many of these smaller objects (~data from Cassini Ultraviolet Imaging Spectrograph (UVIS) and Imaging Science Subsystem (ISS) experiments. We show evidence that B ring seems to harbor two distinct populations of propellers: "big" propellers covering tens of degrees in azimuth situated in the densest part of B ring, and "small" propellers in less dense inner B ring that are similar in size and shape to known A ring propellers. The population of "big" propellers is exemplified with a single object which is observed for 5 years of Cassini data. The object is seen as a very elongated bright stripe (40 degrees wide) in unlit Cassini images, and dark stripe in lit geometries. In total we report observing the feature in images at 18 different epochs between 2005 and 2010. In UVIS occultations we observe this feature as an optical depth depletion in 14 out of 93 occultation cuts at corrotating longitudes compatible with imaging data. Combining the available Cassini data we infer that the object is a partial gap located at r=112,921km embedded in the high optical depth region of the B ring. The gap moves at Kepler speed appropriate for its radial location. Radial offsets of the gap locations in UVIS occultations are consistent with an asymmetric propeller shape. The asymmetry of the observed shape is most likely a consequence of the strong surface mass density gradient, as the feature is located at an edge between

  7. Bistable (latching) solenoid actuated propellant isolation valve

    Science.gov (United States)

    Wichmann, H.; Deboi, H. H.

    1979-01-01

    The design, fabrication, assembly and test of a development configuration bistable (latching) solenoid actuated propellant isolation valve suitable for the control hydrazine and liquid fluorine to an 800 pound thrust rocket engine is described. The valve features a balanced poppet, utilizing metal bellows, a hard poppet/seat interface and a flexure support system for the internal moving components. This support system eliminates sliding surfaces, thereby rendering the valve free of self generated particles.

  8. Offshore Investment Funds

    Directory of Open Access Journals (Sweden)

    Shang-Jin Wei

    1999-12-01

    Full Text Available Offshore investment funds are alleged to have engaged in trading behavior that is different from their onshore counterparts because they may be subject to less supervision and regulation. In particular, they may trade more intensely. They could also pursue more aggressively certain trading strategies such as positive feedback trading or herding that could contribute to a greater volatility in the market. Using a unique data set, this chapter compares the trading behavior in the Korean stock market between offshore investment funds with their onshore counterparts registered in the US and UK. There are a number of interesting findings. First, there is indeed evidence suggesting that the offshore funds trade more intensely than their onshore counterparts. Second, however, there is no evidence that the offshore funds engage in positive feedback trading. In contrast, there is strong evidence that the funds from the U.S. and U.K. do. Third, while offshore funds do herd, they do so far less than onshore funds in the U.S. or UK. Fourth, offshore funds hold less glamour stocks (e.g. stocks with high P/E in their portfolio than funds in the U.S. or U.K. do. Moreover, flight to glamour stocks during the in-crisis period is less evident in the case of offshore funds. In sum, offshore funds are no especially worrisome monsters.

  9. Quadcopter thrust optimization with ducted-propeller

    Directory of Open Access Journals (Sweden)

    Kuantama Endrowednes

    2017-01-01

    Full Text Available In relation to quadcopter body frame model, propeller can be categorized into propeller with ducted and without ducted. This study present differences between those two using CFD (Computational Fluid Dynamics method. Both categories utilize two blade-propeller with diameter of 406 (mm. Propeller rotation generates acceleration per time unit on the volume of air. Based on the behavior of generated air velocity, ducted propeller can be modeled into three versions. The generated thrust and performance on each model were calculated to determine the best model. The use of ducted propeller increases the total weight of quadcopter and also total thrust. The influence of this modeling were analyzed in detail with variation of angular velocity propeller from 1000 (rpm to 9000 (rpm. Besides the distance between propeller tip and ducted barrier, the size of ducted is also an important part in thrust optimization and total weight minimization of quadcopter.

  10. "Selective Cosmopolitans": Tutors' and Students' Experience of Offshore Higher Education in Dubai

    Science.gov (United States)

    Kadiwal, Laila; Rind, Irfan A.

    2013-01-01

    As the offshore mobility of higher education has increased in recent times, the question of how it interacts with the recipient cultures has become ever more significant. Using ethnographic methods, this empirical study examined the adaptation of the UK teacher education model--the Postgraduate Certificate in Education--to the context of Dubai.…

  11. A Study of the Lateral Stability of Self-Propelled Fruit Harvesters

    Directory of Open Access Journals (Sweden)

    Maurizio Cutini

    2017-11-01

    Full Text Available Self-propelled fruit harvesters (SPFHs are agricultural machines designed to facilitate fruit picking and other tasks requiring operators to stay close to the foliage or to the upper part of the canopy. They generally consist of a chassis with a variable height working platform that can be equipped with lateral extending platforms. The positioning of additional masses (operators, fruit bins and the maximum height of the platform (up to three meters above the ground strongly affect machine stability. Since there are no specific studies on the lateral stability of SPFHs, this study aimed to develop a specific test procedure to fill this gap. A survey of the Italian market found 20 firms manufacturing 110 different models of vehicles. Observation and monitoring of SPFHs under real operational conditions revealed the variables mostly likely to affect lateral stability: the position and mass of the operators and the fruit bin on the platform. Two SPFHs were tested in the laboratory to determine their centre of gravity and lateral stability in four different settings reproducing operational conditions. The test setting was found to affect the stability angle. Lastly, the study identified two specific settings reproducing real operational conditions most likely to affect the lateral stability of SPFHs: these should be used as standard, reproducible settings to enable a comparison of results.

  12. Mars Ascent Vehicle-Propellant Aging

    Science.gov (United States)

    Dankanich, John; Rousseau, Jeremy; Williams, Jacob

    2015-01-01

    This project is to develop and test a new propellant formulation specifically for the Mars Ascent Vehicle (MAV) for the robotic Mars Sample Return mission. The project was initiated under the Planetary Sciences Division In-Space Propulsion Technology (ISPT) program and is continuing under the Mars Exploration Program. The two-stage, solid motor-based MAV has been the leading MAV solution for more than a decade. Additional studies show promise for alternative technologies including hybrid and bipropellant options, but the solid motor design has significant propellant density advantages well suited for physical constraints imposed while using the SkyCrane descent stage. The solid motor concept has lower specific impulse (Isp) than alternatives, but if the first stage and payload remain sufficiently small, the two-stage solid MAV represents a potential low risk approach to meet the mission needs. As the need date for the MAV slips, opportunities exist to advance technology with high on-ramp potential. The baseline propellant for the MAV is currently the carboxyl terminated polybutadiene (CTPB) based formulation TP-H-3062 due to its advantageous low temperature mechanical properties and flight heritage. However, the flight heritage is limited and outside the environments, the MAV must endure. The ISPT program competed a propellant formulation project with industry and selected ATK to develop a new propellant formulation specifically for the MAV application. Working with ATK, a large number of propellant formulations were assessed to either increase performance of a CTPB propellant or improve the low temperature mechanical properties of a hydroxyl terminated polybutadiene (HTPB) propellant. Both propellants demonstrated potential to increase performance over heritage options, but an HTPB propellant formulation, TP-H-3544, was selected for production and testing. The test plan includes propellant aging first at high vacuum conditions, representative of the Mars transit

  13. Self-propulsion of a pitching foil

    Science.gov (United States)

    Das, Anil; Shukla, Ratnesh; Govardhan, Raghuraman

    2017-11-01

    Undulatory motions serve as a fundamental mechanism for bio-locomotion at moderate and high Reynolds numbers. An understanding of the interactions between self-propelling undulatory motions and the surrounding fluid, not only provides insight into the efficiency of bio-locomotion, but also yields valuable pointers for the design of autonomous under-water and micro-aerial vehicles. Here, we investigate a simplified model of a self-propelling pitching foil that undergoes time-periodic oscillations about its quarter chord. We consider two-dimensional configurations in which the foil is free to propel along only longitudinal and both transverse and longitudinal directions. In both the configurations, the time-averaged self-propelling velocity increases monotonically with the Reynolds number Re (based on trailing edge speed and chord as the characteristic velocity and length). The rate of increase is particularly pronounced in the low Re regime (Re spaced wake vortices dissipate within a few chord lengths. At moderate and high Re, the wake exhibits increasingly complex structure in both the configurations. For a fixed Re, the foil with a single translational degree of freedom propels at a higher speed for a higher input power requirement. Differences between the two configurations will be discussed within the context of undulatory self-propulsion observed in nature.

  14. Reliability of Self-Reported Mobile Phone Ownership in Rural North-Central Nigeria: Cross-Sectional Study.

    Science.gov (United States)

    Menson, William Nii Ayitey; Olawepo, John Olajide; Bruno, Tamara; Gbadamosi, Semiu Olatunde; Nalda, Nannim Fazing; Anyebe, Victor; Ogidi, Amaka; Onoka, Chima; Oko, John Okpanachi; Ezeanolue, Echezona Edozie

    2018-03-01

    mHealth practitioners seek to leverage the ubiquity of the mobile phone to increase the impact and robustness of their interventions, particularly in resource-limited settings. However, data on the reliability of self-reported mobile phone access is minimal. We sought to ascertain the reliability of self-reported ownership of and access to mobile phones among a population of rural dwellers in north-central Nigeria. We contacted participants in a community-based HIV testing program by phone to determine actual as opposed to self-reported mobile phone access. A phone script was designed to conduct these calls and descriptive analyses conducted on the findings. We dialed 349 numbers: 110 (31.5%) were answered by participants who self-reported ownership of the mobile phone; 123 (35.2%) of the phone numbers did not ring at all; 28 (8.0%) rang but were not answered; and 88 (25.2%) were answered by someone other than the participant. We reached a higher proportion of male participants (68/133, 51.1%) than female participants (42/216, 19.4%; Pphones in rural and low-income areas in north-central Nigeria is higher than actual access. This has implications for mHealth programming, particularly for women's health. mHealth program implementers and researchers need to be cognizant of the low reliability of self-reported mobile phone access. These observations should therefore affect sample-size calculations and, where possible, alternative means of reaching research participants and program beneficiaries should be established. ©William Nii Ayitey Menson, John Olajide Olawepo, Tamara Bruno, Semiu Olatunde Gbadamosi, Nannim Fazing Nalda, Victor Anyebe, Amaka Ogidi, Chima Onoka, John Okpanachi Oko, Echezona Edozie Ezeanolue. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 01.03.2018.

  15. Designing thiophene-based azomethine oligomers with tailored properties: Self-assembly and charge carrier mobility

    DEFF Research Database (Denmark)

    Kiriy, N.; Bocharova, V.; Kiriy, A.

    2004-01-01

    This paper describes synthesis and characterization of two thiophene-based azomethines designed to optimize solubility, self-assembly, and charge carrier mobility. We found that incorporation of azomethine and amide moieties in the alpha,omega-position, and hexyl chains in the beta-position of th...... with the mobilities of the best organic semiconductors. All these significant differences in properties of related compounds can be attributed to the hydrogen bonding between QT-amide molecules responsible for the observed self-assembly....

  16. Whether and What to Offshore?

    DEFF Research Database (Denmark)

    Jensen, Peter Ørberg; Pedersen, Torben

    In this article, we explore the idea that offshoring of services and technical work should be regarded as a dynamic process that evolves over time. Firms gradually move from offshoring of simple, standardized activities towards offshoring of advanced activities when they accumulate experience...... with offshoring, and this type of offshoring comes with an entirely different set of characteristics compared to traditional, cost-seeking offshoring. Based on a unique survey among the total population of firms in the eastern region of Denmark, we analyze some of the dynamics of this process through a model...... that incorporates two different aspects of the process of offshoring. First, we approach the question of whether to offshore and establish a baseline that investigates the determinants of firms’ participation—or lack thereof—in offshoring. Secondly, we approach the question of what to offshore and the subsequent...

  17. Time will tell: The role of mobile learning analytics in self-regulated learning

    NARCIS (Netherlands)

    Tabuenca, Bernardo; Kalz, Marco; Drachsler, Hendrik; Specht, Marcus

    2015-01-01

    This longitudinal study explores the effects of tracking and monitoring time devoted to learn with a mobile tool, on self-regulated learning. Graduate students (n = 36) from three different online courses used their own mobile devices to track how much time they devoted to learn over a period of

  18. Self-represented witnessing: the use of social media by asylum seekers in Australia's offshore immigration detention centres.

    Science.gov (United States)

    Rae, Maria; Holman, Rosa; Nethery, Amy

    2018-05-01

    The act of witnessing connects audiences with distant suffering. But what happens when bearing witness becomes severely restricted? External parties, including the mainstream news media, are constrained from accessing Australia's offshore immigration detention centres. The effect is that people seeking asylum are hidden from the public and excluded from national debates. Some detainees have adopted social media as a platform to communicate their stories of flight, and their experiences of immigration detention, to a wider audience. This article examines the ways in which social media, and particularly Facebook, has facilitated what we call self-represented witnessing. We analyse two public Facebook pages to assess how detainees use such social media networks to document their experiences, and we observe the interaction between detainees, other social media users and mainstream media. Significantly, these social media networks enable detained asylum seekers to conduct an unmediated form of self-represented witnessing that exposes human rights abuses and documents justice claims.

  19. Employability of offshore service sector workers in the Philippines: opportunities for upward labour mobility or dead-end jobs?

    NARCIS (Netherlands)

    Beerepoot, N.; Hendriks, M.

    2013-01-01

    Critical concerns have been raised about the quality of employment in the offshore service sector in developing countries, suggesting that many activities have an inherent paradox of highly educated workers performing low-skilled jobs. Based on empirical data collected in the offshore service sector

  20. Performance Analysis of a Self-Propelling Flat Plate Fin with Joint Compliance

    Science.gov (United States)

    Reddy, N. Srinivasa; Sen, Soumen; Pal, Sumit; Shome, Sankar Nath

    2017-12-01

    Fish fin muscles are compliant and they regulate the stiffness to suit different swimming conditions. This article attempts to understand the significance of presence of compliance in fin muscle with help of a flexible joint flat plate fin model. Blade element method is employed to model hydrodynamics and to compute the forces of interaction during motion of the plate within fluid. The dynamic model of self-propelling fin is developed through multi-body dynamics approach considering the hydrodynamic forces as external forces acting on the fin. The derived hydrodynamic model is validated with experiments on rigid flat plate fin. The effect of the joint stiffness and flapping frequency on the propulsion speed and efficiency is investigated through simulations using the derived and validated model. The propulsion efficiency is found to be highly influenced by the joint stiffness at a given flapping frequency. The fin attained maximum propulsion efficiency when the joint stiffness is tuned to a value at which flapping frequency matches near natural frequency of the fin. At this tuned joint stiffness and flapping frequency, the resulted Strouhal numbers are observed to fall within the optimum range (0.2 to 0.4) for maximized propulsion efficiency of flying birds and swimming aquatic animals reported in literature.

  1. Validating self-reported mobile phone use in adults using a newly developed smartphone application

    NARCIS (Netherlands)

    Goedhart, Geertje; Kromhout, Hans; Wiart, Joe; Vermeulen, Roel

    2015-01-01

    OBJECTIVE: Interpretation of epidemiological studies on health effects from mobile phone use is hindered by uncertainties in the exposure assessment. We used a newly developed smartphone application (app) to validate self-reported mobile phone use and behaviour among adults. METHODS: 107

  2. Industrial opportunities - offshore

    International Nuclear Information System (INIS)

    Gerrits, D.J.

    1998-01-01

    Industrial opportunities available in the Canadian offshore petroleum industry are discussed. Oil has been produced offshore from Nova Scotia since 1992, and offshore from Newfoundland since 1997. Special needs that must be addressed in offshore operations in eastern Canada such as the cold North Atlantic environment, isolation, logistics, safety, and quality assurance, are examined. The most obvious opportunities lie with the designing, building and installing the facilities needed to extract oil and gas from beneath the sea floor and transport it to market. However, there are also opportunities in designing and fabricating clothing, customized food containers and other equipment for offshore needs. Short term opportunities also exist in the decommissioning of depleted production fields and their facilities. One of the greatest obstacles facing new entrants into the offshore oil and gas industry is the lack of a track record. To meet this challenge, the ability to seek out partners to pursue local and international opportunities through joint ventures, strategic alliances and technology sharing partnering arrangements is of great importance. It may be the difference between success and failure. 6 figs

  3. BodiMojo: Efficacy of a Mobile-Based Intervention in Improving Body Image and Self-Compassion among Adolescents.

    Science.gov (United States)

    Rodgers, Rachel F; Donovan, Elizabeth; Cousineau, Tara; Yates, Kayla; McGowan, Kayla; Cook, Elizabeth; Lowy, Alice S; Franko, Debra L

    2018-01-18

    Mobile interventions promoting positive body image are lacking. This study presents a randomized controlled evaluation of BodiMojo, a mobile application (app) intervention grounded in self-compassion to promote positive body image. A sample of 274 adolescents, mean (SD) age = 18.36 (1.34) years, 74% female, were allocated to a control group or used BodiMojo for 6 weeks. Appearance esteem, body image flexibility, appearance comparison, mood, and self-compassion were assessed at baseline, 6, and 12 weeks. Significant time by group interactions emerged for appearance esteem and self-compassion, with appearance esteem and self-compassion increasing in the intervention relative to the control group. These findings provide preliminary support for BodiMojo, a cost-effective mobile app for positive body image.

  4. Reynolds numbers influence the directionality of self-propelled microjet engines in the 10(-4) regime.

    Science.gov (United States)

    Zhao, Guanjia; Nguyen, Nam-Trung; Pumera, Martin

    2013-08-21

    The motion directionality of self-propelled bubble-jet microengines is influenced by their velocities and/or viscosity of the media in which they move. The influence of the fuel concentration from 1 to 3 wt% of H2O2 in 0.5% steps and of the glycerol fraction from 0 to 64% in aqueous solution on the directionality of the microjets motions is examined systematically. We show that with decreasing Reynolds numbers of the system (that is, with increasing viscosity or decreasing velocity of the microjets), the directionality of the motion shifts from circular to linear motion. This translates to a shorter travel time towards a designated target for the microjets despite moving at a slower speed, since the movements are linear instead of circular. We show that such dependence of trajectories of microjets on Re is a general issue. This observation has a strong implication for the real-world applications of microjets.

  5. From Offshoring to Backshoring

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Madsen, Erik Skov

    2015-01-01

    The purpose of this paper is to examine the evolution of offshoring over time. The paper employs qualitative methodology and on the basis of two case studies of Danish companies, it develops a framework conceptualizing the stages of offshoring and highlights the factors driving the transition...... between these stages. The framework challenges the linear nature of offshoring and proposes the existence of ‘the pendulum effect’. The pendulum effect suggests that the modes of offshoring (i.e. captive and non-captive) and geographies of offshoring (i.e. home and abroad) are not static; rather...

  6. High burn rate solid composite propellants

    Science.gov (United States)

    Manship, Timothy D.

    High burn rate propellants help maintain high levels of thrust without requiring complex, high surface area grain geometries. Utilizing high burn rate propellants allows for simplified grain geometries that not only make production of the grains easier, but the simplified grains tend to have better mechanical strength, which is important in missiles undergoing high-g accelerations. Additionally, high burn rate propellants allow for a higher volumetric loading which reduces the overall missile's size and weight. The purpose of this study is to present methods of achieving a high burn rate propellant and to develop a composite propellant formulation that burns at 1.5 inches per second at 1000 psia. In this study, several means of achieving a high burn rate propellant were presented. In addition, several candidate approaches were evaluated using the Kepner-Tregoe method with hydroxyl terminated polybutadiene (HTPB)-based propellants using burn rate modifiers and dicyclopentadiene (DCPD)-based propellants being selected for further evaluation. Propellants with varying levels of nano-aluminum, nano-iron oxide, FeBTA, and overall solids loading were produced using the HTPB binder and evaluated in order to determine the effect the various ingredients have on the burn rate and to find a formulation that provides the burn rate desired. Experiments were conducted to compare the burn rates of propellants using the binders HTPB and DCPD. The DCPD formulation matched that of the baseline HTPB mix. Finally, GAP-plasticized DCPD gumstock dogbones were attempted to be made for mechanical evaluation. Results from the study show that nano-additives have a substantial effect on propellant burn rate with nano-iron oxide having the largest influence. Of the formulations tested, the highest burn rate was a 84% solids loading mix using nano-aluminum nano-iron oxide, and ammonium perchlorate in a 3:1(20 micron: 200 micron) ratio which achieved a burn rate of 1.2 inches per second at 1000

  7. Too much or too little of R&D offshoring : The impact of captive offshoring and contract offshoring on innovation performance

    NARCIS (Netherlands)

    Steinberg, Philip; Procher, Vivien D.; Urbig, Diemo

    2017-01-01

    Innovating firms may acquire foreign knowledge and improve their innovation performance by offshoring their R&D activities to their own foreign affiliates (captive offshoring) as well as by contracting out their R&D to external foreign parties (contract offshoring). This study examines the impact of

  8. Safety in offshore engineering an academic course covering safety in offshore wind

    NARCIS (Netherlands)

    Cerda Salzmann, D.J.

    2011-01-01

    Offshore projects are known for their challenging conditions, generally leading to high risks. Therefore no offshore project can go without a continuous and extensive assessment on safety issues. The Delft University of Technology is currently developing a course "Safety in Offshore Engineering"

  9. A soft robot capable of 2D mobility and self-sensing for obstacle detection and avoidance

    Science.gov (United States)

    Qin, Lei; Tang, Yucheng; Gupta, Ujjaval; Zhu, Jian

    2018-04-01

    Soft robots have shown great potential for surveillance applications due to their interesting attributes including inherent flexibility, extreme adaptability, and excellent ability to move in confined spaces. High mobility combined with the sensing systems that can detect obstacles plays a significant role in performing surveillance tasks. Extensive studies have been conducted on movement mechanisms of traditional hard-bodied robots to increase their mobility. However, there are limited efforts in the literature to explore the mobility of soft robots. In addition, little attempt has been made to study the obstacle-detection capability of a soft mobile robot. In this paper, we develop a soft mobile robot capable of high mobility and self-sensing for obstacle detection and avoidance. This robot, consisting of a dielectric elastomer actuator as the robot body and four electroadhesion actuators as the robot feet, can generate 2D mobility, i.e. translations and turning in a 2D plane, by programming the actuation sequence of the robot body and feet. Furthermore, we develop a self-sensing method which models the robot body as a deformable capacitor. By measuring the real-time capacitance of the robot body, the robot can detect an obstacle when the peak capacitance drops suddenly. This sensing method utilizes the robot body itself instead of external sensors to achieve detection of obstacles, which greatly reduces the weight and complexity of the robot system. The 2D mobility and self-sensing capability ensure the success of obstacle detection and avoidance, which paves the way for the development of lightweight and intelligent soft mobile robots.

  10. Offshore in depth

    Energy Technology Data Exchange (ETDEWEB)

    Ebdon, J F

    1968-08-01

    The world-wide scope of offshore areas is discussed. Offshore areas of the U.S. and the world are where one of the ''hottest'' hydrocarbon booms--drilling, production, and pipelining--are in action today. Most of the current activity in offshore exploration and drilling is crude oil directed. However, big non-associated natural gas finds have been made. Additionally, for every barrel of crude oil produced, either or both associated natural gas and dissolved natural gas are produced in some varying ratio as casinghead gas. Thus, with worldwide production of some 2.5-million bbl of crude oil per day from offshore areas of Free-World countries, there are vast volumes of casinghead natural gas produced, over and above that produced from non-associated natural gas wells to the seaward of land masses. If offshore gas of any classification is produced in commercial volumes close to onshore population centers, then the possibility of marketing is fairly good. If remote from population centers, it is usually flared or shut-in. The development of gas liquefaction and cryogenic tankers has started, but international ocean traffic in LNG is still in its infancy. Current offshore gas pipelines are described.

  11. Mobile Anomaly Detection Based on Improved Self-Organizing Maps

    Directory of Open Access Journals (Sweden)

    Chunyong Yin

    2017-01-01

    Full Text Available Anomaly detection has always been the focus of researchers and especially, the developments of mobile devices raise new challenges of anomaly detection. For example, mobile devices can keep connection with Internet and they are rarely turned off even at night. This means mobile devices can attack nodes or be attacked at night without being perceived by users and they have different characteristics from Internet behaviors. The introduction of data mining has made leaps forward in this field. Self-organizing maps, one of famous clustering algorithms, are affected by initial weight vectors and the clustering result is unstable. The optimal method of selecting initial clustering centers is transplanted from K-means to SOM. To evaluate the performance of improved SOM, we utilize diverse datasets and KDD Cup99 dataset to compare it with traditional one. The experimental results show that improved SOM can get higher accuracy rate for universal datasets. As for KDD Cup99 dataset, it achieves higher recall rate and precision rate.

  12. Numerical modelling of microdroplet self-propelled jumping on micro-textured surface

    Science.gov (United States)

    Attarzadeh, S. M. Reza; Dolatabadi, Ali; Chun Kim, Kyung

    2015-11-01

    Understanding various stages of single and multiple droplet impact on a super-hydrophobic surface is of interest for many industrial applications such as aerospace industry. In this study, the phenomenon of coalescence induced droplets self-propelled jumping on a micro-textured super-hydrophobic surface is numerically simulated using Volume of Fluid (VOF) method. This model mimics the scenario of coalescing cloud-sized particles over the surface structure of an aircraft. The VOF coupled with a dynamic contact angle model is used to simulate the coalescence of two equal size droplets, that are initially placed very closed to each other with their interface overlapping with each other's which triggers the incipience of their coalescence. The textured surface is modeled as a series of equally spaced squared pillars, with 111° as the intrinsic contact angle all over the solid contact area. It is shown that the radial velocity of coalescing liquid bridge is reverted to upward direction due to the counter action of the surface to the basal area of droplet in contact. The presence of air beneath the droplet inside micro grooves which aimed at repelling water droplet is also captured in this model. The simulated results are found in good agreement with experimental observations. The authors gratefully acknowledge the financial support from Natural Sciences and Engineering Research Council of Canada (NSERC), Consortium de Recherche et d'innovation en Aerospatiale au Quebec (CRIAQ), Bombardier Aerospace, Pratt Whitney Canada.

  13. Self-reported walking ability predicts functional mobility performance in frail older adults.

    Science.gov (United States)

    Alexander, N B; Guire, K E; Thelen, D G; Ashton-Miller, J A; Schultz, A B; Grunawalt, J C; Giordani, B

    2000-11-01

    To determine how self-reported physical function relates to performance in each of three mobility domains: walking, stance maintenance, and rising from chairs. Cross-sectional analysis of older adults. University-based laboratory and community-based congregate housing facilities. Two hundred twenty-one older adults (mean age, 79.9 years; range, 60-102 years) without clinical evidence of dementia (mean Folstein Mini-Mental State score, 28; range, 24-30). We compared the responses of these older adults on a questionnaire battery used by the Established Populations for the Epidemiologic Study of the Elderly (EPESE) project, to performance on mobility tasks of graded difficulty. Responses to the EPESE battery included: (1) whether assistance was required to perform seven Katz activities of daily living (ADL) items, specifically with walking and transferring; (2) three Rosow-Breslau items, including the ability to walk up stairs and walk a half mile; and (3) five Nagi items, including difficulty stooping, reaching, and lifting objects. The performance measures included the ability to perform, and time taken to perform, tasks in three summary score domains: (1) walking ("Walking," seven tasks, including walking with an assistive device, turning, stair climbing, tandem walking); (2) stance maintenance ("Stance," six tasks, including unipedal, bipedal, tandem, and maximum lean); and (3) chair rise ("Chair Rise," six tasks, including rising from a variety of seat heights with and without the use of hands for assistance). A total score combines scores in each Walking, Stance, and Chair Rise domain. We also analyzed how cognitive/ behavioral factors such as depression and self-efficacy related to the residuals from the self-report and performance-based ANOVA models. Rosow-Breslau items have the strongest relationship with the three performance domains, Walking, Stance, and Chair Rise (eta-squared ranging from 0.21 to 0.44). These three performance domains are as strongly

  14. A Mobile Self-Reconfigurable Microrobot with Power and Communication Relays

    Directory of Open Access Journals (Sweden)

    Dawei Zhang

    2010-12-01

    Full Text Available A modular mobile self-reconfigurable microrobot is developed to enlarge the whole surveillance range of mobile microrobot. The microrobot is designed as differential driven vehicle equipped with a passive universal connector with autonomic engagement/disengagement function, and actuated by MEMS-based electromagnetic micromotors. To realize that the microrobot is autonomous, its electrical system is designed in modularity and integrated. A simple autonomous docking approach based on infrared sensors is presented. Experimental results verify high efficiency and reliability of the proposed docking method, and demonstrate the improved ability of performing large-range vision-based surveillance by power and communication relays.

  15. A Mobile Self-reconfigurable Microrobot with Power and Communication Relays

    Directory of Open Access Journals (Sweden)

    Dawei Zhang

    2011-01-01

    Full Text Available A modular mobile self-reconfigurable microrobot is developed to enlarge the whole surveillance range of mobile microrobot. The microrobot is designed as differential driven vehicle equipped with a passive universal connector with autonomic engagement/disengagement function, and actuated by MEMS-based electromagnetic micromotors. To realize that the microrobot is autonomous, its electrical system is designed in modularity and integrated. A simple autonomous docking approach based on infrared sensors is presented. Experimental results verify high efficiency and reliability of the proposed docking method, and demonstrate the improved ability of performing large-range vision-based surveillance by power and communication relays.

  16. Wave and offshore wind potential for the island of Tenerife

    International Nuclear Information System (INIS)

    Veigas, M.; Iglesias, G.

    2013-01-01

    Highlights: • The island aims to reduce its carbon footprint by developing renewable energy. • The substantial wave and offshore wind resources around the island are examined. • One area is appropriate for installing a hybrid wave–offshore wind farm. - Abstract: The island of Tenerife, a UNESCO Biosphere Reserve in the Atlantic Ocean, aims to be energy self-sufficient in order to reduce its carbon footprint. To accomplish this goal it should develop the renewable sources, in particular wave and offshore wind energy. The objectives of this work are twofold; (i) to characterize the wave and offshore wind power distribution around the island and (ii) to determine which offshore area is best suited for their exploitation, taking into account the resource and other conditioning factors such as the bathymetry, distance to the coastline and ports, and offshore zoning. To carry out this research, hindcast wave and wind data obtained with numerical models are used alongside observations from meteorological stations. One area, in the vicinity of Puerto de la Cruz, is identified as having great potential for installing a hybrid floating wave–wind farm. Both resources are characterized for the area selected: the wave resource in terms of wave directions, significant wave heights and energy periods; the offshore wind resource in terms of directions and speeds in addition to the seasonality for the both resources. It is found that most of the wave resource is provided by N and NNW waves with significant wave heights between 1.5 m and 3.0 m and energy periods between 10 s and 14 s. It follows that the Wave Energy Converters deployed in the area should have maximum efficiency in those ranges. As for the offshore wind resource, most of the energy corresponds to NNE and NE winds with speeds between 9 and 14 m s −1 , which should be taken into account when selecting the offshore wind turbines

  17. Offshore risk assessment

    CERN Document Server

    Vinnem, Jan-Erik

    2014-01-01

      Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for more than three decades in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions.   This updated and expanded third edition has been informed by a major R&D program on offshore risk assessment in Norway and summarizes research from 2006 to the present day. Rooted with a thorough discussion of risk metrics and risk analysis methodology,  subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems.   Separate chapters analyze the main hazards of offshore structures: fire, explosion, collision, and falling objects as well as structural and marine hazards. Risk mitigation and control are discussed, as well as an illustrat...

  18. The Relative Importance of Motives for International Self-Initiated Mobility

    Science.gov (United States)

    Thorn, Kaye

    2009-01-01

    Purpose: This paper aims to explore the relative importance of the motives and sub-motives which influence a highly educated individual's decision to move across global boundaries. Design/methodology/approach: The approach takes a multi-dimensional perspective of mobility, resulting in the development of a range of motives for self-initiated…

  19. Development of HAN-based Liquid Propellant Thruster

    Science.gov (United States)

    Hisatsune, K.; Izumi, J.; Tsutaya, H.; Furukawa, K.

    2004-10-01

    Many of propellants that are applied to the conventional spacecraft propulsion system are toxic propellants. Because of its toxicity, considering the environmental pollution or safety on handling, it will be necessary to apply the "green" propellant to the spacecraft propulsion system. The purpose of this study is to apply HAN based liquid propellant (LP1846) to mono propellant thruster. Compared to the hydrazine that is used in conventional mono propellant thruster, HAN based propellant is not only lower toxic but also can obtain higher specific impulse. Moreover, HAN based propellant can be decomposed by the catalyst. It means there are the possibility of applying to the mono propellant thruster that can leads to the high reliability of the propulsion system.[1],[2] However, there are two technical subjects, to apply HAN based propellant to the mono propellant thruster. One is the high combustion temperature. The catalyst will be damaged under high temperature condition. The other is the low catalytic activity. It is the serious problem on application of HAN based propellant to the mono propellant thruster that is used for attitude control of spacecraft. To improve the catalytic activity of HAN based propellant, it is necessary to screen the best catalyst for HAN based propellant. The adsorption analysis is conducted by Monte Carlo Simulation to screen the catalyst metal for HAN and TEAN. The result of analysis shows the Iridium is the best catalyst metal for HAN and TEAN. Iridium is the catalyst metal that is used at conventional mono propellant thruster catalyst Shell405. Then, to confirm the result of analysis, the reaction test about catalyst is conducted. The result of this test is the same as the result of adsorption analysis. That means the adsorption analysis is effective in screening the catalyst metal. At the evaluating test, the various types of carrier of catalyst are also compared to Shell 405 to improve catalytic activity. The test result shows the

  20. 14 CFR 35.23 - Propeller control system.

    Science.gov (United States)

    2010-01-01

    ... propeller effect under the intended operating conditions. (4) The failure or corruption of data or signals... corruption of airplane-supplied data does not result in hazardous propeller effects. (e) The propeller... effect. (2) Failures or malfunctions directly affecting the propeller control system in a typical...

  1. Offshore wind energy developments

    DEFF Research Database (Denmark)

    Stolpe, Mathias; Buhl, Thomas; Sumer, B. Mutlu

    2014-01-01

    This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services....

  2. Instrument for assessing mobile technology acceptability in diabetes self-management: a validation and reliability study.

    Science.gov (United States)

    Frandes, Mirela; Deiac, Anca V; Timar, Bogdan; Lungeanu, Diana

    2017-01-01

    Nowadays, mobile technologies are part of everyday life, but the lack of instruments to assess their acceptability for the management of chronic diseases makes their actual adoption for this purpose slow. The objective of this study was to develop a survey instrument for assessing patients' attitude toward and intention to use mobile technology for diabetes mellitus (DM) self-management, as well as to identify sociodemographic characteristics and quality of life factors that affect them. We first conducted the documentation and instrument design phases, which were subsequently followed by the pilot study and instrument validation. Afterward, the instrument was administered 103 patients (median age: 37 years; range: 18-65 years) diagnosed with type 1 or type 2 DM, who accepted to participate in the study. The reliability and construct validity were assessed by computing Cronbach's alpha and using factor analysis, respectively. The instrument included statements about the actual use of electronic devices for DM management, interaction between patient and physician, attitude toward using mobile technology, and quality of life evaluation. Cronbach's alpha was 0.9 for attitude toward using mobile technology and 0.97 for attitude toward using mobile device applications for DM self-management. Younger patients (Spearman's ρ =-0.429; P higher education level (Kendall's τ =0.51; P mobile assistive applications for DM control. Moreover, patients with a higher quality of life presented a significantly more positive attitude toward using modern technology (Spearman's ρ =0.466; P mobile technology for DM self-management. Additionally, we found that even if most of the patients showed positive attitude toward mobile applications, only a moderate level of intention to indeed use them was observed. Moreover, the study indicated that barriers were truthfulness and easiness to use.

  3. Do trout swim better than eels? Challenges for estimating performance based on the wake of self-propelled bodies

    Science.gov (United States)

    Tytell, Eric D.

    Engineers and biologists have long desired to compare propulsive performance for fishes and underwater vehicles of different sizes, shapes, and modes of propulsion. Ideally, such a comparison would be made on the basis of either propulsive efficiency, total power output or both. However, estimating the efficiency and power output of self-propelled bodies, and particularly fishes, is methodologically challenging because it requires an estimate of thrust. For such systems traveling at a constant velocity, thrust and drag are equal, and can rarely be separated on the basis of flow measured in the wake. This problem is demonstrated using flow fields from swimming American eels, Anguilla rostrata, measured using particle image velocimetry (PIV) and high-speed video. Eels balance thrust and drag quite evenly, resulting in virtually no wake momentum in the swimming (axial) direction. On average, their wakes resemble those of self-propelled jet propulsors, which have been studied extensively. Theoretical studies of such wakes may provide methods for the estimation of thrust separately from drag. These flow fields are compared with those measured in the wakes of rainbow trout, Oncorhynchus mykiss, and bluegill sunfish, Lepomis macrochirus. In contrast to eels, these fishes produce wakes with axial momentum. Although the net momentum flux must be zero on average, it is neither spatially nor temporally homogeneous; the heterogeneity may provide an alternative route for estimating thrust. This review shows examples of wakes and velocity profiles from the three fishes, indicating challenges in estimating efficiency and power output and suggesting several routes for further experiments. Because these estimates will be complicated, a much simpler method for comparing performance is outlined, using as a point of comparison the power lost producing the wake. This wake power, a component of the efficiency and total power, can be estimated in a straightforward way from the flow

  4. Deformation Mechanisms of Offshore Monopile Foundations Accounting for Cyclic Mobility Effects

    DEFF Research Database (Denmark)

    Barari, Amin; Bagheri, Mohsen; Rouainia, Mohamed

    2017-01-01

    Highlights •There has been a huge surge in the construction of marine facilities (e.g., wind turbines) in Europe. •This paper presents some new frameworks for design strategy based on performance measures for cyclic horizontally loaded monopile foundations. •A three-dimensional finite element model...... was developed to investigate the behavior of large-diameter piles. •This model accounts for nonlinear dynamic interactions in offshore platforms under harsh combined moment and horizontal environmental loads. •Magnitude of cyclic loads was found to cause a linear increase in the accumulated rotation....

  5. Exploring the Moderating Role of Self-Management of Learning in Mobile English Learning

    Science.gov (United States)

    Huang, Rui-Ting

    2014-01-01

    Although a considerable number of studies have revealed that self-management of learning (SML) could be closely related to learning achievements, there is still a paucity of research investigating the moderating effect of self-management of learning on mobile learning outcomes. Accordingly, the primary purpose of this study was to explore the…

  6. Hydrodynamics of Ship Propellers

    DEFF Research Database (Denmark)

    Breslin, John P.; Andersen, Poul

    This book deals with flows over propellers operating behind ships, and the hydrodynamic forces and moments which the propeller generates on the shaft and on the ship hull.The first part of the text is devoted to fundamentals of the flow about hydrofoil sections (with and without cavitation...... of an intermittently cavitating propeller in a wake and the pressures and forces it exerts on the shaft and on the ship hull is examined. A final chapter discusses the optimization of efficiency of compound propulsors. The authors have taken care to clearly describe physical concepts and mathematical steps. Appendices...

  7. Physics Simulation Software for Autonomous Propellant Loading and Gas House Autonomous System Monitoring

    Science.gov (United States)

    Regalado Reyes, Bjorn Constant

    2015-01-01

    1. Kennedy Space Center (KSC) is developing a mobile launching system with autonomous propellant loading capabilities for liquid-fueled rockets. An autonomous system will be responsible for monitoring and controlling the storage, loading and transferring of cryogenic propellants. The Physics Simulation Software will reproduce the sensor data seen during the delivery of cryogenic fluids including valve positions, pressures, temperatures and flow rates. The simulator will provide insight into the functionality of the propellant systems and demonstrate the effects of potential faults. This will provide verification of the communications protocols and the autonomous system control. 2. The High Pressure Gas Facility (HPGF) stores and distributes hydrogen, nitrogen, helium and high pressure air. The hydrogen and nitrogen are stored in cryogenic liquid state. The cryogenic fluids pose several hazards to operators and the storage and transfer equipment. Constant monitoring of pressures, temperatures and flow rates are required in order to maintain the safety of personnel and equipment during the handling and storage of these commodities. The Gas House Autonomous System Monitoring software will be responsible for constantly observing and recording sensor data, identifying and predicting faults and relaying hazard and operational information to the operators.

  8. Validating self-reported mobile phone use in adults using a newly developed smartphone application.

    Science.gov (United States)

    Goedhart, Geertje; Kromhout, Hans; Wiart, Joe; Vermeulen, Roel

    2015-11-01

    Interpretation of epidemiological studies on health effects from mobile phone use is hindered by uncertainties in the exposure assessment. We used a newly developed smartphone application (app) to validate self-reported mobile phone use and behaviour among adults. 107 participants (mean age 41.4 years) in the Netherlands either downloaded the software app on their smartphone or were provided with a study smartphone for 4 weeks. The app recorded the number and duration of calls, text messages, data transfer, laterality and hands-free use. Self-reported mobile phone use was collected before using the app and after 6 months through an interviewer-administered questionnaire. The geometric mean ratios (GMR, 95% CI) and Spearman correlations (r) of self-reported (after 6 months) versus recorded number and duration of calls were: GMR=0.65 (0.53 to 0.80), r=0.53; and GMR=1.11 (0.86 to 1.42), r=0.57 respectively. Participants held the phone on average for 86% of the total call time near the head. Self-reported right side users held the phone for 70.7% of the total call time on the right side of the head, and left side users for 66.2% on the left side of the head. The percentage of total call time that the use of hands-free devices (headset, speaker mode, Bluetooth) was recorded increased with increasing frequency of reported hands-free device usage. The observed recall errors and precision of reported laterality and hands-free use can be used to quantify and improve radiofrequency exposure models based on self-reported mobile phone use. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. A Mixed-Method Study of Mobile Devices and Student Self-Directed Learning and Achievement During a Middle School STEM Activity

    OpenAIRE

    Bartholomew, Scott

    2016-01-01

    The increasingly ubiquitous nature of mobile devices among K-12 students has led many to argue for and against the inclusion of mobile devices in K-12 classrooms. Some have conjectured that access to mobile devices may enable student self-directed learning. This research used a mixed-method approach to explore the relationships between mobile devices and student achievement and self-directed learning during a Science, Technology, Engineering, & Mathematics (STEM) activity in a middle schoo...

  10. Domestic R&D and Offshoring

    DEFF Research Database (Denmark)

    Junge, Martin; Sørensen, Anders

    2017-01-01

    survey and register data. No evidence is found for a lower probability of own R&D after offshoring takes place compared to before. Moreover, offshoring does not lead to lower R&D intensity in general. However, firms that offshore R&D activity have larger R&D intensity after offshoring has taken place...

  11. Solid propellant impact tests

    International Nuclear Information System (INIS)

    Snow, E.C.

    1976-03-01

    Future space missions, as in the past, call for the continued use of radioisotopes as heat sources for thermoelectric power generators. In an effort to minimize the risk of radioactive contamination of the environment, a complete safety analysis of each such system is necessary. As a part of these analyses, the effects on such a system of a solid propellant fire environment resulting from a catastrophic launch pad abort must be considered. Several impact tests were conducted in which either a simulant MHW-FSA or a steel ball was dropped on the cold, unignited or the hot, burning surface of a block of UTP-3001 solid propellant. The rebound velocities were measured for both surface conditions of the propellant. The resulting coefficient of restitution, determined as the ratio of the components of the impact and rebound velocities perpendicular to the impact surface of the propellant, were not very dependent on whether the surface was cold or hot at the time of impact

  12. Current trends in offshore technology

    International Nuclear Information System (INIS)

    Korsgaard, J.

    1994-01-01

    Although this is a technical symposium concerning advances in the technology of producing oil and gas offshore, a keynote address would not be complete without mentioning non-technical factors which are extremely important for the business of producing oil and gas offshore. These are political factors and economic factors. Offshore operations are an easy target for political forces that are opposed to marine operations involving the production and transfer of hydrocarbons. For example, the oil pollution act of 1990 was a reaction to the Exxon Valdez grounding in Alaska and this act has added significantly to the risk and cost of operating offshore. Another example of this is that it is becoming more and more difficult to dispose of produced water offshore. Producing oil and gas offshore is a business that competes with other energy sources such as coal and oil and gas from wells on land. The offshore oil can only compete with these other resources by providing the same product at a competitive price. Since offshore operations are inherently more costly than land operations, the offshore oil field or gas field must be significantly larger than a land field in order to be produced. Also the offshore oil field or gas field is more susceptible to environmental risks from weather. On a more positive note, there are technical developments which are taking place and have continuously taken place to make offshore oil and gas both more economic and safer to produce. These developments are briefly discussed

  13. Propeller and inflow vortex interaction : vortex response and impact on the propeller performance

    NARCIS (Netherlands)

    Yang, Y.; Zhou, T; Sciacchitano, A.; Veldhuis, L.L.M.; Eitelberg, G.

    2016-01-01

    The aerodynamic operating conditions of a propeller can include complex situations where vorticity from sources upstream can enter the propeller plane. In general, when the vorticity enters in a concentrated form of a vortex, the interaction between the vortex and blade is referred to as

  14. A self propelled drilling system for hard-rock, horizontal and coiled tube drilling

    Energy Technology Data Exchange (ETDEWEB)

    Biglin, D.; Wassell, M.

    1997-12-31

    Several advancements are needed to improve the efficiency and reliability of both hard rock drilling and extended reach drilling. This paper will present a Self Propelled Drilling System (SPDS) which can grip the borehole wall in order to provide a stable platform for the application of weight on bit (WOB) and resisting the reactive torque created by the downhole drilling motor, bit and formation interaction. The system will also dampen the damaging effects of drill string vibration. This tool employs two hydraulically activated anchors (front and rear) to grip the borehole wall, and a two-way thrust mandrel to apply both the drilling force to the bit, and a retraction force to pull the drill string into the hole. Forward drilling motion will commence by sequencing the anchor pistons and thrust mandrel to allow the tool to walk in a stepping motion. The SPDS has a microprocessor to control valve timing, sensing and communication functions. An optional Measurement While Drilling (MWD) interface can provide two-way communication of critical operating parameters such as hydraulic pressure and piston location. This information can then be telemetered to the surface, or used downhole to autonomously control system parameters such as anchor and thrust force or damping characteristics.

  15. New Propellants and Cryofuels

    Science.gov (United States)

    Palasezski, Bryan; Sullivan, Neil S.; Hamida, Jaha; Kokshenev, V.

    2006-01-01

    The proposed research will investigate the stability and cryogenic properties of solid propellants that are critical to NASA s goal of realizing practical propellant designs for future spacecraft. We will determine the stability and thermal properties of a solid hydrogen-liquid helium stabilizer in a laboratory environment in order to design a practical propellant. In particular, we will explore methods of embedding atomic species and metallic nano-particulates in hydrogen matrices suspended in liquid helium. We will also measure the characteristic lifetimes and diffusion of atomic species in these candidate cryofuels. The most promising large-scale advance in rocket propulsion is the use of atomic propellants; most notably atomic hydrogen stabilized in cryogenic environments, and metallized-gelled liquid hydrogen (MGH) or densified gelled hydrogen (DGH). The new propellants offer very significant improvements over classic liquid oxygen/hydrogen fuels because of two factors: (1) the high energy-release, and (ii) the density increase per unit energy release. These two changes can lead to significant reduced mission costs and increased payload to orbit weight ratios. An achievable 5 to 10 percent improvement in specific impulse for the atomic propellants or MGH fuels can result in a doubling or tripling of system payloads. The high-energy atomic propellants must be stored in a stabilizing medium such as solid hydrogen to inhibit or delay their recombination into molecules. The goal of the proposed research is to determine the stability and thermal properties of the solid hydrogen-liquid helium stabilizer. Magnetic resonance techniques will be used to measure the thermal lifetimes and the diffusive motions of atomic species stored in solid hydrogen grains. The properties of metallic nano-particulates embedded in hydrogen matrices will also be studied and analyzed. Dynamic polarization techniques will be developed to enhance signal/noise ratios in order to be able to

  16. Offshoring and International Competitiveness

    DEFF Research Database (Denmark)

    Ørberg Jensen, Peter D.; Pedersen, Torben

    2012-01-01

    During the past decade, offshoring has become an established business practice. Yet it is still more common to offshore less advanced tasks compared with offshoring more advanced tasks, i.e., tasks closer to the core activities of the firm. The latter is a new phenomenon which raises many new iss...

  17. Offshore Transmission Technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-10-15

    The purpose of this document is to give an overview of offshore electricity transmission technologies. In particular this document is concerned with the use of High Voltage Direct Current (HVDC) systems and more specifically with the development of Voltage Source Converter (VSC) technology. This report outlines the current state of the main technology groups required for offshore HVDC transmission as well as giving examples of offshore projects (both current and future). Finally some indications of likely unit costs for HV assets are given.

  18. Self-Management Interventions to Prevent the Secondary Condition of Pain in People with Disability Due to Mobility Limitations

    Directory of Open Access Journals (Sweden)

    Katherine Froehlich-Grobe

    2016-01-01

    Full Text Available Introduction This focused review examines the use and effectiveness of self-management strategies in preventing or managing pain, which is among the most common secondary conditions faced by individuals with a mobility disability. Methods This focused review was part of a two-phase comprehensive scoping review. Phase I was a comprehensive scoping review of the literature targeting multiple outcomes of self-management interventions for those with mobility impairment, and Phase II was a focused review of the literature on self-management interventions that target pain as a primary or secondary outcome. Two authors searched CINAHL, PubMed, and PsyclNFO for papers published from January 1988 through August 2014 using specified search terms. Following the scoping review, the authors independently screened and selected the studies and reviewed the eligible studies, and the first author extracted data from the included studies. Results The scoping review yielded 40 studies that addressed pain self-management interventions for those living with mobility impairment. These 40 accumulated papers revealed a heterogeneous evidence base in terms of setting (clinic, community, and online, target populations, intervention duration (3 weeks to 24 months, and mode (health-care providers and lay leaders. Most of the reviewed studies reported that the self-management intervention led to significant reduction of pain over time, suggesting that self-management may be a promising approach for addressing pain experienced by people who live with mobility limitations. Discussion This review also reveals moderate-to-high bias across studies, and findings indicate that future research should enhance the methodological quality to provide stronger evidence about the effectiveness of self-management strategies for reducing pain among those with mobility impairments.

  19. Outsourcing software development offshore making IT work

    CERN Document Server

    Gold, Tandy

    2004-01-01

    THE OFFSHORE IMPERATIVECrunching the Offshore Numbers: What the Financials PortendWelcome to the Definitive Guide on Offshore OutsourcingSetting the Stage: The Compelling Offshore StoryOffshore Outsourcing versus Traditional IT OutsourcingChallenges of Offshore OutsourcingChapter SummaryGetting Started in OffshoreExecutive Support and Communications: The Key to SuccessA Look at an Example of Enlightened Leadership: Handling Employee Impact at a Northeast Utilities CompanyWell-Planned and Executed Communications: A Critical Success Factor for Offshore Program InitiationEstablishing the Offshore

  20. Offshore wind energy prospects

    International Nuclear Information System (INIS)

    Gaudiosi, Gaetano

    1999-01-01

    In last two years offshore wind energy is becoming a focal point of national and non national organisations particularly after the limitations of fossil fuel consumption, adopted by many developed countries after Kyoto conference at the end of 1997 on global climate change. North Europe is particularly interested in offshore for the limited land areas still available, due to the intensive use of its territory and its today high wind capacity. Really the total wind capacity in Europe could increase from the 1997 value of 4450 MW up to 40 000 MW within 2010, according the White Paper 1997 of the European Commission; a significant percentage (25%) could be sited offshore up to 10 000 MW, because of close saturation of the land sites at that time. World wind capacity could increase from the 1997 value of 7200 MW up to 60 000 MW within 2010 with a good percentage (20%) offshore 12 000 MW. In last seven years wind capacity in shallow water of coastal areas has reached 34 MW. Five wind farms are functioning in the internal seas of Netherlands, Denmark, Sweden; however such siting is mostly to be considered as semi-offshore condition. Wind farms in real offshore sites, open seas with waves and water depth over 10 m, are now proposed in North Sea at 10-20 km off the coasts of Netherlands, Denmark using large size wind turbine (1-2 MW). In 1997 an offshore proposal was supported in Netherlands by Greenpeace after the OWEMES '97 seminar, held in Italy on offshore wind in the spring 1997. A review is presented in the paper of European offshore wind programs with trends in technology, economics and siting effects. (Author)

  1. Mars Surface Mobility Leading to Sustainable Exploration

    Science.gov (United States)

    Linne, Diane L.; Barsi, Stephen J.; Sjauw En Wa, Waldy K.; Landis, Geoffrey A.

    2012-01-01

    A Mars rocket-propelled hopper concept was evaluated for feasibility through analysis and experiments. The approach set forth in this paper is to combine the use of in-situ resources in a new Mars mobility concept that will greatly enhance the science return while providing the first opportunity towards reducing the risk of incorporating ISRU into the critical path for the highly coveted, but currently unaffordable, sample return mission. Experimental tests were performed on a high-pressure, self-throttling gaseous oxygen/methane propulsion system to simulate a two-burn-with-coast hop profile. Analysis of the trajectory, production plant requirements, and vehicle mass indicates that a small hopper vehicle could hop 2 km every 30 days with an initial mass of less than 60 kg. A larger vehicle can hop 15 km every 30 to 60 days with an initial mass of 300 to 430 kg.

  2. Interpersonal conflicts at work as a predictor of self-reported health outcomes and occupational mobility.

    Science.gov (United States)

    De Raeve, L; Jansen, N W H; van den Brandt, P A; Vasse, R; Kant, I J

    2009-01-01

    The aim of this prospective study was to examine the relationship between interpersonal conflicts at work and subsequent self-reported health outcomes (self-reported general health, need for recovery, and prolonged fatigue) and occupational mobility (internal mobility ie, changing job function, and external mobility ie, changing employers). Data from the Maastricht Cohort Study on fatigue at work (n = 5582 for co-worker conflict; n = 5530 for supervisor conflict) were used. Interpersonal conflict with either co-workers or supervisors was assessed between baseline and 1-year follow-up. Outcomes were studied every 4 months between 1-year and 2-year follow-up. Logistic regression analyses using generalised estimating equations were conducted for each of the dichotomous outcomes, while controlling for demographic factors, the presence of a long-term illness, other workplace stressors, coping, and outcome at baseline. Analyses were conducted for men only. At baseline, conflicts with co-workers occurred in 7.2% of the study population, while conflicts with supervisors occurred in 9.5% of the study population. In general, this study showed that co-worker conflict was a statistically significant risk factor for the onset of an elevated need for recovery, prolonged fatigue, poor general health and external occupational mobility. Supervisor conflict was a significant risk factor for the onset of an elevated need for recovery, prolonged fatigue, external occupational mobility, and internal occupational mobility. The results of this study indicate a possible causal relationship between interpersonal conflicts at work and self-reported health and occupational mobility. Given the considerable impact of interpersonal conflicts at work on the individual worker and on the organisation, and the fact that interpersonal conflicts at work are highly prevalent, these findings underline the need for interventions aimed at preventing the occurrence of interpersonal conflicts at work, or

  3. Evaluation of hand-held ion-mobility explosives vapor detectors

    International Nuclear Information System (INIS)

    Burrows, T.A.; Thoma, P.J.

    1979-12-01

    Two types of ion-mobility detectors were evaluated in both laboratory and field tests. Laboratory test results show that these detectors are highly sensitive to dynamite and pistol powder and have good false-alarm agent rejection. Field tests of these two detectors revealed that they would detect dynamite and Ball-C-Propellent in free air. However, neither of the ion-mobility detectors would detect these explosives if the explosives were concealed

  4. Nuclear thermal rockets using indigenous extraterrestrial propellants

    International Nuclear Information System (INIS)

    Zubrin, R.M.

    1990-01-01

    A preliminary examination of a concept for a Mars and outer solar system exploratory vehicle is presented. Propulsion is provided by utilizing a nuclear thermal reactor to heat a propellant volatile indigenous to the destination world to form a high thrust rocket exhaust. Candidate propellants, whose performance, materials compatibility, and ease of acquisition are examined and include carbon dioxide, water, methane, nitrogen, carbon monoxide, and argon. Ballistics and winged supersonic configurations are discussed. It is shown that the use of this method of propulsion potentially offers high payoff to a manned Mars mission. This is accomplished by sharply reducing the initial mission mass required in low earth orbit, and by providing Mars explorers with greatly enhanced mobility in traveling about the planet through the use of a vehicle that can refuel itself each time it lands. Thus, the nuclear landing craft is utilized in combination with a hydrogen-fueled nuclear-thermal interplanetary launch. By utilizing such a system in the outer solar system, a low level aerial reconnaissance of Titan combined with a multiple sample return from nearly every satellite of Saturn can be accomplished in a single launch of a Titan 4 or the Space Transportation System (STS). Similarly a multiple sample return from Callisto, Ganymede, and Europa can also be accomplished in one launch of a Titan 4 or the STS

  5. The association between self-esteem and happiness differs in relationally mobile vs. stable contexts

    Directory of Open Access Journals (Sweden)

    Kosuke eSato

    2014-10-01

    Full Text Available Does a change in the nature of surrounding social context affect the strength of association between self-esteem and happiness? This paper aims to answer this question from a socio-ecological perspective, focusing on the role of relational mobility. Recent research has shown that this association is stronger in societies that are higher in relational mobility, where there is a greater freedom of choice in interpersonal relationships and group memberships. In this study, we tested if this hypothesis could be applied to situational differences within the same physical setting. Using a quasi-experimental design, we tested if the association between self-esteem and happiness was stronger for first-year students at a Japanese university who had just entered the college and thus were in a relatively higher mobility context, than the second year students at the same university whose relationships tended to be more stable and long-standing. The results showed, as predicted, that the association between self-esteem and happiness was stronger for the first-year students than for the second-year students. Implications for the theory and research on social change are discussed.

  6. Assessing offshore wind potential

    International Nuclear Information System (INIS)

    Adelaja, Adesoji; McKeown, Charles; Calnin, Benjamin; Hailu, Yohannes

    2012-01-01

    Quantifying wind potential is a pivotal initial step in developing and articulating a state’s policies and strategies for offshore wind industry development. This is particularly important in the Great Lakes States where lessons from other offshore environments are not directly applicable. This paper presents the framework developed for conducting a preliminary assessment of offshore wind potential. Information on lake bathymetry and wind resources were combined in simulating alternative scenarios of technically feasible turbine construction depths and distance concerns by stakeholders. These yielded estimates of developable offshore wind areas and potential power generation. While concerns about the visibility of turbines from shore reduce the power that can be generated, engineering solutions that increase the depths at which turbines can be sited increase such potential power output. This paper discusses the costs associated with technical limitations on depth and the social costs related to public sentiments about distance from the shoreline, as well as the possible tradeoffs. The results point to a very large untapped energy resource in the Michigan’s Great Lakes, large enough to prompt policy action from the state government. - Highlights: ▶ We build a theoretical framework for modeling offshore wind power production. ▶ Illustration of the impact of technology and social limitations on offshore wind energy development. ▶ Geospatial modeling of the offshore wind potential of the Great Lakes.

  7. Cavitation simulation on marine propellers

    DEFF Research Database (Denmark)

    Shin, Keun Woo

    Cavitation on marine propellers causes thrust breakdown, noise, vibration and erosion. The increasing demand for high-efficiency propellers makes it difficult to avoid the occurrence of cavitation. Currently, practical analysis of propeller cavitation depends on cavitation tunnel test, empirical...... criteria and inviscid flow method, but a series of model test is costly and the other two methods have low accuracy. Nowadays, computational fluid dynamics by using a viscous flow solver is common for practical industrial applications in many disciplines. Cavitation models in viscous flow solvers have been...... hydrofoils and conventional/highly-skewed propellers are performed with one of three cavitation models proven in 2D analysis. 3D cases also show accuracy and robustness of numerical method in simulating steady and unsteady sheet cavitation on complicated geometries. Hydrodynamic characteristics of cavitation...

  8. Wind energy in offshore grids

    DEFF Research Database (Denmark)

    Schröder, Sascha Thorsten

    special characteristics of offshore grids. With an operational real options approach, it is furthermore illustrated how different support schemes and connections to additional countries affect the investment case of an offshore wind farm and the income of the transmission system operator. The investment...... and investment implications under different regulatory frameworks are a hitherto underrepresented research field. They are addressed by this thesis. Offshore grids between several countries combine the absorption of wind energy with international power trading. However, the inclusion into an offshore grid......This cumulative PhD thesis deals with wind integration in offshore grids from an economic point of view. It is composed of a generic part and eight papers. As the topic has mostly been analysed with a focus on topology and technical issues until now, market-operational questions in offshore grids...

  9. The Hidden Costs of Offshoring

    DEFF Research Database (Denmark)

    Møller Larsen, Marcus; Manning, Stephan; Pedersen, Torben

    2011-01-01

    of offshoring. Specifically, we propose that hidden costs can be explained by the combination of increasing structural, operational and social complexity of offshoring activities. In addition, we suggest that firm orientation towards organizational design as part of an offshoring strategy and offshoring......This study seeks to explain hidden costs of offshoring, i.e. unexpected costs resulting from the relocation of business tasks and activities outside the home country. We develop a model that highlights the role of complexity, design orientation and experience in explaining hidden costs...... experience moderate the relationship between complexity and hidden costs negatively i.e. reduces the cost generating impact of complexity. We develop three hypotheses and test them on comprehensive data from the Offshoring Research Network (ORN). In general, we find support for our hypotheses. A key result...

  10. Offshore Wind Energy Market Overview (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, I.

    2013-07-01

    This presentation describes the current international market conditions regarding offshore wind, including the breakdown of installation costs, how to reduce costs, and the physical siting considerations considered when planning offshore wind construction. The presentation offers several examples of international existing and planned offshore wind farm sites and compares existing international offshore resources with U.S. resources. The presentation covers future offshore wind trends and cites some challenges that the United States must overcome before it will be able to fully develop offshore wind sites.

  11. Offshore investments-cui prodis? Schrodinger's cat in offshore financing: Both alive and dead

    Directory of Open Access Journals (Sweden)

    Stepuk Anna

    2014-01-01

    Full Text Available Trends of FDI in offshore tax havens were compared to efforts and efficiency of regulatory authorities to prevent money laundering. Based on available data it was stated that current position in offshore FDI stays alive and officially dead at the same time, keeping the balance of interests for the main stakeholders: corporations, authorities and financial institutes support further offshore investments. Analysis based on volumes of trade and financial transactions between offshore centers, developed and developing countries. As a result withdrawal of financial resources from the developing countries degrades social capital funding and supports corruption growth.

  12. Thermal Vacuum Test Correlation of a Zero Propellant Load Case Thermal Capacitance Propellant Gauging Analytical Model

    Science.gov (United States)

    Mckim, Stephen A.

    2016-01-01

    This thesis describes the development and correlation of a thermal model that forms the foundation of a thermal capacitance spacecraft propellant load estimator. Specific details of creating the thermal model for the diaphragm propellant tank used on NASA's Magnetospheric Multiscale spacecraft using ANSYS and the correlation process implemented are presented. The thermal model was correlated to within plus or minus 3 degrees Celsius of the thermal vacuum test data, and was determined sufficient to make future propellant predictions on MMS. The model was also found to be relatively sensitive to uncertainties in applied heat flux and mass knowledge of the tank. More work is needed to improve temperature predictions in the upper hemisphere of the propellant tank where predictions were found to be 2 to 2.5 C lower than the test data. A road map for applying the model to predict propellant loads on the actual MMS spacecraft toward its end of life in 2017-2018 is also presented.

  13. Mobility Divides

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    Contemporary mobilities are cultural and social manifestations, and the mobile practices in the everyday life of billions of humans are re-configuring senses of place, self, other and relationships to the built environment. The way ‘mobile situations’ are staged in designed and built environments......’ in the everyday life and cast light on how design and ‘materialities of mobilites’ are creating differential mobilities across societies, social networks, and communities of practices.......Contemporary mobilities are cultural and social manifestations, and the mobile practices in the everyday life of billions of humans are re-configuring senses of place, self, other and relationships to the built environment. The way ‘mobile situations’ are staged in designed and built environments...

  14. Patient contributions during primary care consultations for hypertension after self-reporting via a mobile phone self-management support system.

    Science.gov (United States)

    Bengtsson, Ulrika; Kjellgren, Karin; Hallberg, Inger; Lundin, Mona; Mäkitalo, Åsa

    2018-03-01

    This paper reports on how the clinical consultation in primary care is performed under the new premises of patients' daily self-reporting and self-generation of data. The aim was to explore and describe the structure, topic initiation and patients' contributions in follow-up consultations after eight weeks of self-reporting through a mobile phone-based hypertension self-management support system. A qualitative, explorative study design was used, examining 20 audio- (n = 10) and video-recorded (n = 10) follow-up consultations in primary care hypertension management, through interaction analysis. Clinical trials registry: ClinicalTrials.gov NCT01510301. Four primary health care centers in Sweden. Patients with hypertension (n = 20) and their health care professional (n = 7). The consultations comprised three phases: opening, examination and closing. The most common topic was blood pressure (BP) put in relation to self-reported variables, for example, physical activity and stress. Topic initiation was distributed symmetrically between parties and BP talk was lifestyle-centered. The patients' contributed to the interpretation of BP values by connecting them to specific occasions, providing insights to the link between BP measurements and everyday life activities. Patients' contribution through interpretations of BP values to specific situations in their own lives brought on consultations where the patient as a person in context became salient. Further, the patients' and health care professionals' equal contribution during the consultations showed actively involved patients. The mobile phone-based self-management support system can thus be used to support patient involvement in consultations with a person-centered approach in primary care hypertension management Key points   The clinical consultation is important to provide opportunities for patients to gain understanding of factors affecting high blood pressure, and for health care professionals to

  15. Cascadia Onshore-Offshore Site Response, Submarine Sediment Mobilization, and Earthquake Recurrence

    Science.gov (United States)

    Gomberg, J.

    2018-02-01

    Local geologic structure and topography may modify arriving seismic waves. This inherent variation in shaking, or "site response," may affect the distribution of slope failures and redistribution of submarine sediments. I used seafloor seismic data from the 2011 to 2015 Cascadia Initiative and permanent onshore seismic networks to derive estimates of site response, denoted Sn, in low- and high-frequency (0.02-1 and 1-10 Hz) passbands. For three shaking metrics (peak velocity and acceleration and energy density) Sn varies similarly throughout Cascadia and changes primarily in the direction of convergence, roughly east-west. In the two passbands, Sn patterns offshore are nearly opposite and range over an order of magnitude or more across Cascadia. Sn patterns broadly may be attributed to sediment resonance and attenuation. This and an abrupt step in the east-west trend of Sn suggest that changes in topography and structure at the edge of the continental margin significantly impact shaking. These patterns also correlate with gravity lows diagnostic of marginal basins and methane plumes channeled within shelf-bounding faults. Offshore Sn exceeds that onshore in both passbands, and the steepest slopes and shelf coincide with the relatively greatest and smallest Sn estimates at low and high frequencies, respectively; these results should be considered in submarine shaking-triggered slope stability failure studies. Significant north-south Sn variations are not apparent, but sparse sampling does not permit rejection of the hypothesis that the southerly decrease in intervals between shaking-triggered turbidites and great earthquakes inferred by Goldfinger et al. (2012, 2013, 2016) and Priest et al. (2017) is due to inherently stronger shaking southward.

  16. Influence of Self-emissions on a Mobile Laboratory and Implications for Urban Sampling

    Science.gov (United States)

    Wendt, L. P.

    2017-12-01

    The importance of urban systems as a large source of greenhouse gases has led to an increase in ground-based campaigns designed to identify and quantify sources. However, plume emissions from vehicle tailpipes can affect emissions for a stationary vehicle or if a tailwind lofts the plume over the car particularly in an urban canyons where wind flow is constrained [1]. Advances in battery technology allow for electric vehicles to sample without self-emissions. Chevrolet has released the Bolt with an estimated range of 238 miles per charge. We are designing a mobile lab using a Chevrolet Bolt with the sensors 5 ft above the ground to reduce drag. Here we investigate the occurrence of self-emissions from a gasoline mobile laboratory set-up that has been optimized to reduce self-emissions and the potential benefits of switching to an electric vehicle for urban sampling. A 2002 Toyota Sienna van and a Licor 7500 CO2/H2O analyzer were deployed to quantify self-emissions. A custom-designed rack elevated the sensors to a height of 8 feet above the tailpipe to minimize self-emission samples [1]. Emissions were sampled over 5 intervals near a relatively isolated field with the van oriented in five directions. A south-easterly wind ( 131o) provided a self-sample opportunity by orienting the car with the tailpipe between the oncoming wind and the sensors. Over 1.5 hours of measurement, 7.8 % of CO2 measurements exceeded 420 ppmv. Of these, four possible self-sample events were observed, or less than 1% with other enhancements attributed to passing cars. These were observed in mild wind conditions averaging 2.8 m/s and only with the tail pipe directly facing into the wind. Results suggest that self-sampling is small in an environment with mild sustained winds and open surroundings. Given the challenge of identifying self-emissions in an isolated environment, urban self-sampling could impact the overall sample especially as these signals may be hard to distinguish from the

  17. Drag and Torque on Locked Screw Propeller

    Directory of Open Access Journals (Sweden)

    Tomasz Tabaczek

    2014-09-01

    Full Text Available Few data on drag and torque on locked propeller towed in water are available in literature. Those data refer to propellers of specific geometry (number of blades, blade area, pitch and skew of blades. The estimation of drag and torque of an arbitrary propeller considered in analysis of ship resistance or propulsion is laborious. The authors collected and reviewed test data available in the literature. Based on collected data there were developed the empirical formulae for estimation of hydrodynamic drag and torque acting on locked screw propeller. Supplementary CFD computations were carried out in order to prove the applicability of the formulae to modern moderately skewed screw propellers.

  18. Offshoring research directions

    NARCIS (Netherlands)

    Velthuijsen, Hugo

    2012-01-01

    Outsourcing and offshoring provide companies with ways to achieve their business objectives better or more cost effectively or despite a shortage of specific resources. From a research point of view, outsourcing and offshoring have mostly been studied as something that large companies do, not small

  19. An Design of HF-Band RFID System with Multiple Readers and Passive Tags for Indoor Mobile Robot Self-Localization

    Directory of Open Access Journals (Sweden)

    Jian Mi

    2016-07-01

    Full Text Available Radio frequency identification (RFID technology has already been explored for efficient self-localization of indoor mobile robots. A mobile robot equipped with RFID readers detects passive RFID tags installed on the floor in order to locate itself. The Monte-Carlo localization (MCL method enables the localization of a mobile robot equipped with an RFID system with reasonable accuracy, sufficient robustness and low computational cost. The arrangements of RFID readers and tags and the size of antennas are important design parameters for realizing accurate and robust self-localization using a low-cost RFID system. The design of a likelihood model of RFID tag detection is also crucial for the accurate self-localization. This paper presents a novel design and arrangement of RFID readers and tags for indoor mobile robot self-localization. First, by considering small-sized and large-sized antennas of an RFID reader, we show how the design of the likelihood model affects the accuracy of self-localization. We also design a novel likelihood model by taking into consideration the characteristics of the communication range of an RFID system with a large antenna. Second, we propose a novel arrangement of RFID tags with eight RFID readers, which results in the RFID system configuration requiring much fewer readers and tags while retaining reasonable accuracy of self-localization. We verify the performances of MCL-based self-localization realized using the high-frequency (HF-band RFID system with eight RFID readers and a lower density of RFID tags installed on the floor based on MCL in simulated and real environments. The results of simulations and real environment experiments demonstrate that our proposed low-cost HF-band RFID system realizes accurate and robust self-localization of an indoor mobile robot.

  20. Noise from Two-Blade Propellers

    Science.gov (United States)

    Stowell, E Z; Deming, A F

    1936-01-01

    The two-blade propeller, one of the most powerful sources of sound known, has been studied with the view of obtaining fundamental information concerning the noise emission. In order to eliminate engine noise, the propeller was mounted on an electric motor. A microphone was used to pick up the sound whose characteristics were studied electrically. The distribution of noise throughout the frequency range, as well as the spatial distribution about the propeller, was studied. The results are given in the form of polar diagrams. An appendix of common acoustical terms is included.

  1. National Offshore Wind Energy Grid Interconnection Study

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, John P. [ABB Inc; Liu, Shu [ABB Inc; Ibanez, Eduardo [National Renewable Energy Laboratory; Pennock, Ken [AWS Truepower; Reed, Greg [University of Pittsburgh; Hanes, Spencer [Duke Energy

    2014-07-30

    The National Offshore Wind Energy Grid Interconnection Study (NOWEGIS) considers the availability and potential impacts of interconnecting large amounts of offshore wind energy into the transmission system of the lower 48 contiguous United States. A total of 54GW of offshore wind was assumed to be the target for the analyses conducted. A variety of issues are considered including: the anticipated staging of offshore wind; the offshore wind resource availability; offshore wind energy power production profiles; offshore wind variability; present and potential technologies for collection and delivery of offshore wind energy to the onshore grid; potential impacts to existing utility systems most likely to receive large amounts of offshore wind; and regulatory influences on offshore wind development. The technologies considered the reliability of various high-voltage ac (HVAC) and high-voltage dc (HVDC) technology options and configurations. The utility system impacts of GW-scale integration of offshore wind are considered from an operational steady-state perspective and from a regional and national production cost perspective.

  2. Use of self-report to predict ability to walk 400 meters in mobility-limited older adults.

    Science.gov (United States)

    Sayers, Stephen P; Brach, Jennifer S; Newman, Anne B; Heeren, Tim C; Guralnik, Jack M; Fielding, Roger A

    2004-12-01

    To determine whether the ability to walk 400 m could be predicted from self-reported walking habits and abilities in older adults and to develop an accurate self-report measure appropriate for observational trials of mobility when functional measures are impractical to collect. Cross-sectional. University-based human physiology laboratory. One hundred fifty community-dwelling older men and women (mean age+/-standard error= 79.8+/-0.3). An 18-item questionnaire assessing walking habits and ability was administered to each participant, followed by a 400-m walk test. Ninety-eight (65%) volunteers were able to complete the 400-m walk; 52 (35%) were unable. Logistic regression was performed using response items from a questionnaire as predictors and 400-m walk as the outcome. Three questions (Do you think you could walk one-quarter of a mile now without sitting down to rest. Because of a health or physical problem, do you have difficulty walking 1 mile? Could you walk up and down every aisle of a grocery store without sitting down to rest or leaning on a cart?) were predictive of 400-m walking ability and were included in the model. If participants answered all three questions compatible with the inability to walk 400 m, there was a 91% probability that they were unable to walk 400 m, with a sensitivity of 46% and a specificity of 97%. A three-item self-report developed in the study was able to accurately predict mobility disability. The utility of this instrument may be in evaluating self-reported mobility in large observational trials on mobility when functional mobility tasks are impractical to collect.

  3. Offshore investments: Denmark shows the way

    International Nuclear Information System (INIS)

    Anon.

    1998-01-01

    This article presents an overview of the use of wind power in Denmark and discusses the tremendous growth in the manufacture of wind turbines since 1981 with Denmark holding some 60% of the worlds' wind turbine market. The move to offshore wind farms is explained in terms of the shortage of land and the quality of the offshore wind, and details of the Tuno Knob pilot offshore wind farm are given. Offshore wind power in Europe, the challenges to offshore operations, the costs involved, environmental effects of the use of offshore wind, and the growing amount of wind power capacity are discussed

  4. Global offshore pipeline markets

    International Nuclear Information System (INIS)

    Knight, R.; Parsons, B.

    2001-01-01

    In this article, two experts forecast a recovery in the offshore pipeline market followed by accelerating growth. A number of clearly definable macro trends are affecting the world offshore oil and gas industry and will be of considerable significance to the offshore pipelines industry. The authors' view is of markets that show every chance of enjoying long-term growth prospects driven by the fundamentals of a continuing increase in demand for offshore oil and gas. The offshore industry however has a highly cyclical nature, due to the impact of variations in oil and gas prices and the differing state of maturity of individual regions. Therefore those companies that are able to offer the widest range of pipe types and diameters and methods of installation across the greatest range of geographic markets are likely to prosper most. Thus, this continues to be a market best suited to those able to operate on a global scale and make a corporate commitment measured in decades

  5. Benefits of Self-Organizing Networks (SON for Mobile Operators

    Directory of Open Access Journals (Sweden)

    Olav Østerbø

    2012-01-01

    Full Text Available Self-Organizing Networks (SON is a collection of functions for automatic configuration, optimization, diagnostisation and healing of cellular networks. It is considered to be a necessity in future mobile networks and operations due to the increased cost pressure. The main drivers are essentially to reduce CAPEX and OPEX, which would otherwise increase dramatically due to increased number of network parameters that has to be monitored and set, the rapidly increasing numbers of base stations in the network and parallel operation of 2G, 3G and Evolved Packet Core (EPC infrastructures. This paper presents evaluations on the use of some of the most important SON components. Mobile networks are getting more complex to configure, optimize and maintain. Many SON functions will give cost savings and performance benefits from the very beginning of a network deployment and these should be prioritized now. But even if many functions are already available and can give large benefits, the field is still in its infancy and more advanced functions are either not yet implemented or have immature implementations. It is therefore necessary to have a strategy for how and when different SON functions should be introduced in mobile networks.

  6. Panorama 2012 - Offshore hydrocarbons

    International Nuclear Information System (INIS)

    Serbutoviez, Sylvain

    2011-12-01

    Technological progress is enabling production from offshore oil and gas fields at increasingly ambitious depths (3, 000 metres). Investment in offshore production is running at around $100 billion per year, accounting for one-fifth of all investment in oil exploration and development worldwide. However, the global economic crisis that broke at the end of 2008 and the accident involving the Macondo well temporarily disrupted the race to deep offshore technology. (author)

  7. Development and validation of models for simulation of supercritical carbon dioxide Brayton cycles and application to self-propelling heat removal systems in boiling water reactors

    International Nuclear Information System (INIS)

    Venker, Jeanne

    2015-01-01

    The objective of the current work was to develop a model that is able to describe the transient behavior of supercritical carbon dioxide (sCO 2 ) Brayton cycles, to be applied to self-propelling residual heat removal systems in boiling water reactors. The developed model has been implemented into the thermohydraulic system code ATHLET. By means of this improved ATHLET version, novel residual heat removal systems, which are based on closed sCO 2 Brayton cycles, can be assessed as a retrofit measure for present light water reactors. Transient simulations are hereby of great importance. The heat removal system has to be modeled explicitly to account for the interaction between the system and the behavior of the plant during different accident conditions. As a first step, transport and thermodynamic fluid properties of supercritical carbon dioxide have been implemented in ATHLET to allow for the simulation of the new working fluid. Additionally, a heat transfer correlation has been selected to represent the specific heat transfer of supercritical carbon dioxide. For the calculation of pressure losses due to wall friction, an approach for turbulent single phase flow has been adopted that is already implemented in ATHLET. In a second step, a component model for radial compressors has been implemented in the system code. Furthermore, the available model for axial turbines has been adapted to simulate the transient behavior of radial turbines. All extensions have been validated against experimental data. In order to simulate the interaction between the self-propelling heat removal system and a generic boiling water reactor, the components of the sCO 2 Brayton cycle have been dimensioned with first principles. An available input deck of a generic BWR has then been extended by the residual heat removal system. The modeled application has shown that the extended version of ATHLET is suitable to simulate sCO 2 Brayton cycles and to evaluate the introduced heat removal system

  8. Propeller Flaps: A Literature Review.

    Science.gov (United States)

    Sisti, Andrea; D'Aniello, Carlo; Fortezza, Leonardo; Tassinari, Juri; Cuomo, Roberto; Grimaldi, Luca; Nisi, Giuseppe

    2016-01-01

    Since their introduction in 1991, propeller flaps are increasingly used as a surgical approach to loss of substance. The aim of this study was to evaluate the indications and to verify the outcomes and the complication rates using this reconstructing technique through a literature review. A search on PubMed was performed using "propeller flap", "fasciocutaneous flap", "local flap" or "pedicled flap" as key words. We selected clinical studies using propeller flaps as a reconstructing technique. We found 119 studies from 1991 to 2015. Overall, 1,315 propeller flaps were reported in 1,242 patients. Most frequent indications included loss of substance following tumor excision, repair of trauma-induced injuries, burn scar contractures, pressure sores and chronic infections. Complications were observed in 281/1242 patients (22.6%) occurring more frequently in the lower limbs (31.8%). Partial flap necrosis and venous congestion were the most frequent complications. The complications' rate was significantly higher in infants (70 years old) but there was not a significant difference between the sexes. Trend of complication rate has not improved during the last years. Propeller flaps showed a great success rate with low morbidity, quick recovery, good aesthetic outcomes and reduced cost. The quality and volume of the transferred soft tissue, the scar orientation and the possibility of direct donor site closure should be considered in order to avoid complications. Indications for propeller flaps are small- or medium-sized defects located in a well-vascularized area with healthy surrounding tissues. Copyright © 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  9. Disposal of Liquid Propellants

    Science.gov (United States)

    1990-03-13

    propellant includes an oxi- dizer (hydroxylammoniuin nitrate), a fuel (triethanolammonium nitrate), and water . In an- ticipation of widespread (both...are also included. 20. DISTRIBUTION/ AVAILABILIT ’." OF ABMTRACT 21 ABSTRACT SECURITY CLASSIF.CATICIN IUNCLASSIFIEDIUNLIMITED 0 SAME AS RPT. 0 OTIC...trieth- anolammoiur nitrate), anG water . In anticipation of widespread (both conti- nental U.S. and abroac) use of the propellant, USATHAMA began a

  10. Participatory research design in mobile health: Tablet devices for diabetes self-management.

    Science.gov (United States)

    Burford, Sally; Park, Sora; Dawda, Paresh; Burns, John

    2015-01-01

    Type 2 diabetes is a prevalent, chronic disease, which places significant burden on societies and individuals. This article reports the participatory research design of an exploratory study that introduces mobile tablet devices in the self-management of type 2 diabetes in a primary healthcare setting. Strategies from democratic dialogic theory were used in the design of the research to steer the participatory engagement between researchers and healthcare practitioners. The outcome of this phase of the research was the issue of six ‘invitations’ to 28 people with diabetes to frame their use of a mobile tablet device in managing their health. Those invitations were clustered in two themes, Empowered and Compelled, representing typical patient attitudes and behaviours. The work reported here sets the stage for a longitudinal and socially complex study that encompasses a new and comprehensive General Practitioner (GP) Super Clinic with an array of health and administrative staff, patients with a chronic health condition requiring continual self-management, a wide continuum of digital literacy capability in all participants and an ever-increasing digital society. It reports a novel research design methodology that merges democratic dialogic theory and participatory design, resulting in a grounded and agreed approach to a mobile health intervention.

  11. A theoretical and experimental investigation of propeller performance methodologies

    Science.gov (United States)

    Korkan, K. D.; Gregorek, G. M.; Mikkelson, D. C.

    1980-01-01

    This paper briefly covers aspects related to propeller performance by means of a review of propeller methodologies; presentation of wind tunnel propeller performance data taken in the NASA Lewis Research Center 10 x 10 wind tunnel; discussion of the predominent limitations of existing propeller performance methodologies; and a brief review of airfoil developments appropriate for propeller applications.

  12. Magnetic control of potential microrobotic drug delivery systems: nanoparticles, magnetotactic bacteria and self-propelled microjets.

    Science.gov (United States)

    Khalil, Islam S M; Magdanz, Veronika; Sanchez, Samuel; Schmidt, Oliver G; Abelmann, Leon; Misra, Sarthak

    2013-01-01

    Development of targeted drug delivery systems using magnetic microrobots increases the therapeutic indices of drugs. These systems have to be incorporated with precise motion controllers. We demonstrate closed-loop motion control of microrobots under the influence of controlled magnetic fields. Point-to-point motion control of a cluster of iron oxide nanoparticles (diameter of 250 nm) is achieved by pulling the cluster towards a reference position using magnetic field gradients. Magnetotactic bacterium (MTB) is controlled by orienting the magnetic fields towards a reference position. MTB with membrane length of 5 µm moves towards the reference position using the propulsion force generated by its flagella. Similarly, self-propelled microjet with length of 50 µm is controlled by directing the microjet towards a reference position by external magnetic torque. The microjet moves along the field lines using the thrust force generated by the ejecting oxygen bubbles from one of its ends. Our control system positions the cluster of nanoparticles, an MTB and a microjet at an average velocity of 190 µm/s, 28 µm/s, 90 µm/s and within an average region-of-convergence of 132 µm, 40 µm, 235 µm, respectively.

  13. Offshore industry: medical emergency response in the offshore oil and gas industry.

    Science.gov (United States)

    Ponsonby, Will; Mika, Frano; Irons, Greg

    2009-08-01

    The hunt for oil and gas has taken workers into new more distant locations including those offshore. The remoteness of the offshore platforms and vessels coupled with the potential risk of being cut off by bad weather presents particular challenges for medical emergency response (MER). Firstly to define the challenges for MER in terms of locations, population and epidemiology of injuries and illnesses in the offshore environment. Secondly to give examples of legal requirements and industry standards to manage MER. Thirdly to look at existing and emerging practice to manage these challenges. A review of published literature was supplemented with a summary of current practice in the industry. Medical professionals (medics) working offshore on installations and vessels are primarily responsible for the medical care of the workers. The medics have clinics with suitable medical equipment for managing emergencies as well as providing limited primary care. Some countries have legislation that stipulate minimum requirements. Where there is no national legislation, industry and company guidance is used to define the MER standards. Supervision of the offshore medics is often provided by doctors on shore via radio and phone links. These methods of communication are now being augmented with more sophisticated telemedicine solutions such as the Internet and live video links. These newer solutions allow for prompt high-quality care and provide the scope for a variety of new treatment options to be available for the offshore workforce.

  14. Cavitation noise studies on marine propellers

    Science.gov (United States)

    Sharma, S. D.; Mani, K.; Arakeri, V. H.

    1990-04-01

    Experimental observations are described of cavitation inception and noise from five model propellers, three basic and two modified, tested in the open jet section of the Indian Institute of Science high-speed water tunnel facility. Extensive experiments on the three basic propellers of different design, which included visualization of cavitation and measurements of noise, showed that the dominant type of cavitation was in the form of tip vortex cavitation, accompanied by leading edge suction side sheet cavitation in its close vicinity, and the resultant noise depended on parameters such as the advance coefficient, the cavitation number, and the propeller geometry. Of these, advance coefficient was found to have the maximum influence not only on cavitation noise but also on the inception of cavitation. Noise levels and frequencies of spectra obtained from all the three basic propellers at conditions near inception and different advance coefficient values, when plotted in the normalized form as suggested by Blake, resulted in a universal spectrum which would be useful for predicting cavitation noise at prototype scales when a limited extent of cavitation is expected in the same form as observed on the present models. In an attempt to delay the onset of tip vortex cavitation, the blades of two of the three basic propellers were modified by drilling small holes in the tip and leading edge areas. Studies on the modified propellers showed that the effectiveness of the blade modification was apparently stronger at low advance coefficient values and depended on the blade sectional profile. Measurements of cavitation noise indicated that the modification also improved the acoustic performance of the propellers as it resulted in a complete attenuation of the low-frequency spectral peaks, which were prominent with the basic propellers. In addition to the above studies, which were conducted under uniform flow conditions, one of the basic propellers was tested in the simulated

  15. The association between self-esteem and happiness differs in relationally mobile vs. stable interpersonal contexts.

    Science.gov (United States)

    Sato, Kosuke; Yuki, Masaki

    2014-01-01

    Does a change in the nature of surrounding social context affect the strength of association between self-esteem and happiness? This paper aims to answer this question from a socio-ecological perspective, focusing on the role of relational mobility. Recent research has shown that this association is stronger in societies that are higher in relational mobility, where there is a greater freedom of choice in interpersonal relationships and group memberships. In this study, we tested if this hypothesis could be applied to situational differences within the same physical setting. Using a quasi-experimental design, we tested if the association between self-esteem and happiness was stronger for first-year students at a Japanese university who had just entered the college and thus were in a relatively higher mobility context, than the second-year students at the same university whose relationships tended to be more stable and long-standing. The results showed, as predicted, that the association between self-esteem and happiness was stronger for the first-year students than for the second-year students. Implications for the theory and research on social change are discussed.

  16. Uncovering the Hidden Costs of Offshoring

    DEFF Research Database (Denmark)

    Larsen, Marcus M.; Manning, Stephan; Pedersen, Torben

    2013-01-01

    This study investigates estimation errors due to hidden costs—the costs of implementation that are neglected in strategic decision-making processes—in the context of services offshoring. Based on data from the Offshoring Research Network, we find that decision makers are more likely to make cost......-estimation errors given increasing configuration and task complexity in captive offshoring and offshore outsourcing, respectively. Moreover, we show that experience and a strong orientation toward organizational design in the offshoring strategy reduce the cost-estimation errors that follow from complexity. Our...

  17. Tidal influence on offshore wind fields and resource predictions[Efficient Development of Offshore Windfarms

    Energy Technology Data Exchange (ETDEWEB)

    Khan, D. [Entec UK Ltd., Doherty Innovation Centre, Penicuik (United Kingdom); Infield, D. [Loughborough Univ., Centre for Renewable Energy Systems Tecnology, Loughborough (United Kingdom)

    2002-03-01

    The rise and fall of the sea surface due to tides effectively moves an offshore wind turbine hub through the wind shear profile. This effect is quantified using measured data from 3 offshore UK sites. Statistical evidence of the influence of tide on mean wind speed and turbulence is presented. The implications of this effect for predicting offshore wind resource are outlined. (au)

  18. The engineering of a nuclear thermal landing and ascent vehicle utilizing indigenous Martian propellant

    Science.gov (United States)

    Zubrin, Robert M.

    1990-01-01

    A design study of a novel space transportation concept called NIMF (Nuclear rocket using Indigenous Martian Fuel) is reported. In this concept, Martian CO2 gas, which constitutes 95 percent of the atmosphere, is liquified by simple compression to about 100 psi and remains stable without refrigeration. When heated and exhausted out of a rocket nozzle, a specific impulse of about 264 s can be achieved, sufficient for flights from the surface to highly energetic orbits or from one point on the surface to any other point. The propellant acquisition system can travel with the vehicle, allowing it to refuel itself each time it lands. The concept offers unequalled potential to achieve planetwide mobility, allowing complete global access for the exploration of Mars. By eliminating the necessity of transporting ascent propellant to Mars, the NIMF can also significantly reduce the initial mass in LEO and of a manned Mars mission.

  19. Healthy offshore workforce? A qualitative study on offshore wind employees' occupational strain, health, and coping.

    Science.gov (United States)

    Mette, Janika; Velasco Garrido, Marcial; Harth, Volker; Preisser, Alexandra M; Mache, Stefanie

    2018-01-23

    Offshore work has been described as demanding and stressful. Despite this, evidence regarding the occupational strain, health, and coping behaviors of workers in the growing offshore wind industry in Germany is still limited. The purpose of our study was to explore offshore wind employees' perceptions of occupational strain and health, and to investigate their strategies for dealing with the demands of offshore work. We conducted 21 semi-structured telephone interviews with employees in the German offshore wind industry. The interviews were transcribed and analyzed in a deductive-inductive approach following Mayring's qualitative content analysis. Workers generally reported good mental and physical health. However, they also stated perceptions of stress at work, fatigue, difficulties detaching from work, and sleeping problems, all to varying extents. In addition, physical health impairment in relation to offshore work, e.g. musculoskeletal and gastrointestinal complaints, was documented. Employees described different strategies for coping with their job demands. The strategies comprised of both problem and emotion-focused approaches, and were classified as either work-related, health-related, or related to seeking social support. Our study is the first to investigate the occupational strain, health, and coping of workers in the expanding German offshore wind industry. The results offer new insights that can be utilized for future research in this field. In terms of practical implications, the findings suggest that measures should be carried out aimed at reducing occupational strain and health impairment among offshore wind workers. In addition, interventions should be initiated that foster offshore wind workers' health and empower them to further expand on effective coping strategies at their workplace.

  20. Improvement in energy release properties of boron-based propellant by oxidant coating

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Daolun; Liu, Jianzhong, E-mail: jzliu@zju.edu.cn; Chen, Binghong; Zhou, Junhu; Cen, Kefa

    2016-08-20

    Highlights: • NH{sub 4}ClO{sub 4}, KNO{sub 3}, KClO{sub 4} and HMX coated B were used to prepare propellant samples. • FTIR, XRD and SEM were used for the microstructure analysis of the prepared B. • Thermal oxidation and combustion characteristics of the propellants were studied. • HMX coating was the most beneficial to the energy release of the samples. - Abstract: The energy release properties of a propellant can be improved by coating boron (B) particles with oxidants. In the study, B was coated with four different oxidants, namely, NH{sub 4}ClO{sub 4}, KNO{sub 3}, LiClO{sub 4}, and cyclotetramethylenetetranitramine (HMX), and the corresponding propellant samples were prepared. First, the structural and morphological analyses of the pretreated B were carried out. Then, the thermal analysis and laser ignition experiments of the propellant samples were carried out. Coating with NH{sub 4}ClO{sub 4} showed a better performance than mechanical mixing with the same component. Coating with KNO{sub 3} efficiently improved the ignition characteristics of the samples. Coating with LiClO{sub 4} was the most beneficial in reducing the degree of difficulty of B oxidation. Coating with HMX was the most beneficial in the heat release of the samples. The KNO{sub 3}-coated sample had a very high combustion intensity in the beginning, but then it rapidly became weak. Large amounts of sparks were ejected during the combustion of the LiClO{sub 4}-coated sample. The HMX-coated sample had the longest self-sustaining combustion time (4332 ms) and the highest average combustion temperature (1163.92 °C).

  1. An Investigation of the Relationship between High-School Students' Problematic Mobile Phone Use and Their Self-Esteem Levels

    Science.gov (United States)

    Isiklar, Abdullah; Sar, Ali Haydar; Durmuscelebi, Mustafa

    2013-01-01

    Excessive mobile phone use, especially among adolescents, brings too many debates about its effects. To this end, in this study, we try to investigate the relationship between adolescents' mobile phone use and their self-esteem levels with regard to their genders. For 919 high school students, we evaluated mobile phone use concerning their…

  2. Global mobility orientation and the success of self-initiated expatriates in greater China

    DEFF Research Database (Denmark)

    Lauring, Jakob; Selmer, Jan

    2014-01-01

    We investigated 640 self-initiated expatriate academics residing in Greater China. We examined whether their inherent demographic characteristics (age/gender) and acquired demographic characteristics (marital status/seniority) differentiated their work outcomes regarding job adjustment, time...... to proficiency, performance and satisfaction. We also explored the associations between global mobility orientation and these four work outcomes and examined to what extent the demographic characteristics differentiated the relationships. Results support most hypothesized differences. We found that a global...... mobility orientation was associated with all the work outcomes, except satisfaction. For inherent demographic characteristics, we found support for our hypotheses that for individuals with less successful demographics (younger, male), there was a stronger relationship between global mobility orientation...

  3. Co-sourcing in software development offshoring

    DEFF Research Database (Denmark)

    Schlichter, Bjarne Rerup; Persson, John Stouby

    2013-01-01

    Software development projects are increasingly geographical distributed with offshoring, which introduce complex risks that can lead to project failure. Co-sourcing is a highly integrative and cohesive approach, seen successful, to software development offshoring. However, research of how co......-sourcing shapes the perception and alleviation of common offshoring risks is limited. We present a case study of how a certified CMMI-level 5 Danish software supplier approaches these risks in offshore co-sourcing. The paper explains how common offshoring risks are perceived and alleviated when adopting the co...

  4. Design off-shore wind climate

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, G C; Joergensen, H E [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark)

    1999-03-01

    Specific recommendations of off-shore turbulence intensities, applicable for design purposes, are lacking in the present IEC-code. The present off-shore wind climate analysis presents the distribution of the turbulence standard deviation around the mean turbulence standard deviation, conditioned on the mean wind speed. Measured distributions, based on a huge amount of measuring data from two shallow water off-shore sites, are parameterized by fitting to a three parameter Weibull distribution. Combining a simple heuristic load model with the parameterized probability density functions of the turbulence standard deviations, an empirical off-shore design turbulence intensity is evaluated that in average yields the same fatigue damage as the distributed turbulence intensity. The proposed off-shore design turbulence intensity is, within the IEC code framework, applicable for extreme as well as for fatigue load determination. (au)

  5. OFFSHORING FOR SUSTAINABLE VALUE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Thaddeus Oforegbunam Ebiringa

    2014-05-01

    Full Text Available This paper evaluates offshoring as a strategic value management initiative using Cadbury Nigeria Plc as a case study. Through offshoring risks associated with inventory holding are hedged. A comparative analysis of in-house and offshored cost profiles as well as critical risk factors that affect firm value are evaluated. The result shows that offshoring led to immediate costs saving, freeing of funds previously held in inventory for other working capital investments as well as profitability for vendors. However, aside financial benefits to partners, it leads to increased stakeholders awareness, shared values, partnerships, teamwork and risk mitigation. It therefore follows that for sustainability of financial benefits of offshoring, concerted effort must be made by partners to ensure that critical drivers of value management are not compromised.

  6. Tests on thirteen navy type model propellers

    Science.gov (United States)

    Durand, W F

    1927-01-01

    The tests on these model propellers were undertaken for the purpose of determining the performance coefficients and characteristics for certain selected series of propellers of form and type as commonly used in recent navy designs. The first series includes seven propellers of pitch ratio varying by 0.10 to 1.10, the area, form of blade, thickness, etc., representing an arbitrary standard propeller which had shown good results. The second series covers changes in thickness of blade section, other things equal, and the third series, changes in blade area, other things equal. These models are all of 36-inch diameter. Propellers A to G form the series on pitch ratio, C, N. I. J the series on thickness of section, and K, M, C, L the series on area. (author)

  7. Evolution and Reduction of Scour around Offshore Wind Turbines

    Science.gov (United States)

    McGovern, David; Ilic, Suzana

    2010-05-01

    Evolution and Reduction of Scour around Offshore Wind Turbines In response to growing socio-economic and environmental demands, electricity generation through offshore wind turbine farms is a fast growing sector of the renewable energy market. Considerable numbers of offshore wind farms exist in the shallow continental shelf seas of the North-West Europe, with many more in the planning stages. Wind energy is harnessed by large rotating blades that drive an electricity generating turbine placed on top of a long cylindrical monopile that are driven into the sea-bed, well into the bed rock below the sediment. Offshore wind turbines are popular due to consistently higher wind speeds and lower visual impact than their onshore counter parts, but their construction and maintenance is not without its difficulties. The alteration of flow by the presence of the wind turbine monopile results in changes in sedimentary processes and morphology at its base. The increase in flow velocity and turbulence causes an amplification of bed shear stress and this can result in the creation of a large scour hole at the monopile base. Such a scour hole can adversely affect the structural integrity and hence longevity of the monopile. Changes to the sea bed caused by this may also locally affect the benthic habitat. We conducted an extensive series of rigid and mobile bed experiments to examine the process of scour under tidal currents. We also test the effectiveness of a flow-altering collared monopile in reducing scour. Firstly, we used Particle Image Velocimetry (PIV) and Acoustic Doppler Velocimetry (ADV) to visualise and analyse the flow and turbulence properties in the local flow around the monopile and collared monopile over a smooth rigid bed under tidal flow. The measured flow, turbulence and shear stress properties are related to mobile bed tests where a Seatek 5 MHz Ultrasonic Ranging system is used to identify the evolution of scour under reversing tidal currents. The tidal

  8. Investigating Students' Self-Efficacy and Attitudes towards the Use of Mobile Learning

    Science.gov (United States)

    Yorganci, Serpil

    2017-01-01

    Nowadays, mobile learning (m-learning) presents new and powerful opportunities for effective teaching and learning. Two significant factors that serve in understanding if students accept m-learning technology are self-efficacy and attitudes towards m-learning usage. For this purpose, the present study investigated vocational college students'…

  9. High School Pupils' Attitudes and Self-Efficacy of Using Mobile Devices

    Science.gov (United States)

    Nikolopoulou, Kleopatra; Gialamas, Vasilis

    2017-01-01

    This paper regards a study aiming to investigate junior high school pupils' attitudes and self-efficacy of using mobile devices. A 25-item questionnaire was administered to 260 pupils aged 12-15 years old, in Greece. Pupils' attitudes were positive, and four factors were extracted, "perceived usefulness", "affection",…

  10. Estimation of cost development of offshore wind energy in the Netherlands and required governmental contribution to realize 6,000 MW in 2020

    International Nuclear Information System (INIS)

    De Vries, H.J.; Van Sambeek, E.J.W.

    2004-04-01

    The development of the cost of the production of electricity from offshore wind sources is explored. These cost developments are used to estimate the cost of the Dutch Government to fulfil its self-set target of 6,000 MW offshore wind energy capacity in 2020 [nl

  11. Self-propelled micromotors based on Au-mesoporous silica nanorods

    Science.gov (United States)

    Wang, Ying-Shuai; Xia, Hong; Lv, Chao; Wang, Lei; Dong, Wen-Fei; Feng, Jing; Sun, Hong-Bo

    2015-07-01

    Here, a chemical powered micromotor from the assembly of Au-SiO2 nanorods is presented. This new micromotor can be propelled efficiently by hydrogen bubbles generated from a hydrolysis reaction of aqueous NaBH4 and KBH4 and by oxygen bubbles produced by decomposition of H2O2. The monodisperse Au nanoparticles in mesoporous silica particles could catalyze the decomposition of two different kinds of fuels and produce bubbles. High speeds of 80 μm s-1 and recycles of more than 30 times are achieved in both NaBH4 and H2O2 media. Locomotion and rolling forms of movement were found. The locomotion forms can be obtained in a larger proportion by patterning the Au-SiO2 nanorods and a PDMS membrane. These micromotors that use multiple fuel sources to power them offer a broader scope of preparation and show considerable promise for diverse applications of nanomotors in different chemical environments.Here, a chemical powered micromotor from the assembly of Au-SiO2 nanorods is presented. This new micromotor can be propelled efficiently by hydrogen bubbles generated from a hydrolysis reaction of aqueous NaBH4 and KBH4 and by oxygen bubbles produced by decomposition of H2O2. The monodisperse Au nanoparticles in mesoporous silica particles could catalyze the decomposition of two different kinds of fuels and produce bubbles. High speeds of 80 μm s-1 and recycles of more than 30 times are achieved in both NaBH4 and H2O2 media. Locomotion and rolling forms of movement were found. The locomotion forms can be obtained in a larger proportion by patterning the Au-SiO2 nanorods and a PDMS membrane. These micromotors that use multiple fuel sources to power them offer a broader scope of preparation and show considerable promise for diverse applications of nanomotors in different chemical environments. Electronic supplementary information (ESI) available: More electronic microscopy graphs, UV-Vis spectra and N2 adsorption isotherms. See DOI: 10.1039/c5nr02545a

  12. Establishing an independent mobile health programme for chronic disease self-management support in Bolivia

    Directory of Open Access Journals (Sweden)

    John D Piette

    2014-08-01

    Full Text Available Background: Mobile health (m-health work in low and middle-income countries (LMICs mainly consists of pilot programmes with an unclear path to scaling and dissemination. We describe the deployment and testing of an m-health platform for non-communicable disease (NCD self-management support in Bolivia. Methods: 364 primary care patients in La Paz with diabetes or hypertension completed surveys about their use of mobile phones, health and access to care. 165 of those patients then participated in a 12-week demonstration of automated telephone monitoring and self-management support. Weekly Interactive Voice Response (IVR calls were made from a platform established at a university in La Paz, under the direction of the regional health ministry. Results: 37% of survey respondents spoke indigenous languages at home, and 38% had six or fewer years of education. 82% had a mobile phone; half (45% used text messaging with a standard phone, and 9% had a smartphone. Smartphones were least common among patients who were older, spoke indigenous languages, or had less education. IVR programme participants completed 1007 self-management support calls, with an overall response rate of 51%. IVR call completion was lower among older adults, but was not related to patients’ ethnicity, health status or healthcare access. IVR health and self-care reports were consistent with information reported during baseline interviews. Patients’ likelihood of reporting excellent, very good, or good health (versus fair or poor health via IVR increased during programme participation, and was associated with better medication adherence. Patients completing follow-up interviews were satisfied with the programme, with 19/20 (95% reporting that they would recommend it to a friend. Conclusions: By collaborating with LMICs, m-health programmes can be transferred from higher-resource centres to LMICs and implemented in ways that improve access to self-management support among people

  13. Offshore oil and gas and offshore wind power - different in terms of safety.?; Offshore Oel and Gas und Offshore Wind - mit Sicherheit ''anders''.?

    Energy Technology Data Exchange (ETDEWEB)

    Weise, F.; Tatulinski, M. [DNV GL - Oil and Gas Germany, Hamburg (Germany)

    2014-07-01

    Safety standards in the oil and gas industry have risen to a high level over the past decades, driven in part by momentous accidents. Furthermore, an expanded framework has recently been defined through the new EU Offshore Safety Directive, which in Germany is still in the process of its transposition into national law. The installation of offshore wind farms in the North and Baltic Sea has within the shortest of time brought forth an entirely new branch of industry, most of whose players have no significant experience with offshore operations. One of the greatest challenges is the working environment, which is being approached in different ways by those involved. The supervisory authorities responsible are only just beginning to develop the competence required for their tasks, with the effect that regulations pertaining to onshore operations are often simply adopted as they are. This is in some cases impacting on the oil and gas industry, as is discussed in the present lecture. [German] Die Oel und Gas Industrie hat in den vergangen Jahrzehnten einen hohen Sicherheitsstandard entwickelt, teilweise getrieben durch signifikante Unfallereignisse. Aktuell wurde zudem mit der neuen EU-Offshore Richtlinie ein erweiterter Rahmen definiert, der sich in Deutschland noch in der gesetzgeberischen Umsetzung befindet. Durch die Installation von Offshore-Windparks in der Nord- und Ostsee ist innerhalb kuerzester Zeit zusaetzlich ein neuer Industriebereich entstanden, dessen Marktteilnehmer mehrheitlich nicht ueber signifikante Offshore-Erfahrung verfuegen. Insbesondere das Arbeitsumfeld stellt dabei eine Herausforderung dar, die von den Beteiligten unterschiedlich geloest wird. Ferner beginnen auch die verantwortlichen Aufsichtsbehoerden erst mit dem Aufbau entsprechender Kompetenzen, so dass vielfach auch Regelungen aus dem Onshore-Bereich uebertragen werden. Dies fuehrt teilweise zu Auswirkungen auf die Oel- und Gasindustrie, die im Rahmen dieses Vortrages diskutiert werden.

  14. Large Propellant Tank Cryo-Cooler (LPTC)

    Data.gov (United States)

    National Aeronautics and Space Administration — In rocket test and launch facilities, cryogenic propellants stored in tanks boils off due to heat leakage, with the following impacts:Ø   Waste, propellants boil off...

  15. Seawater Immersion of GEM II Propellant

    National Research Council Canada - National Science Library

    Merrill, Calude

    1999-01-01

    ... (% AP lost/week aged in seawater) and intercepts that depend on sample size. Friction and impact data on dried aged propellant samples showed no increased burning hazard compared with propellant not exposed to water...

  16. Dutch offshore suppliers in confident mood

    International Nuclear Information System (INIS)

    Beudel, M.

    1998-01-01

    A series of linked articles discusses the current state of the Netherland's offshore industry. Reduced taxes, and availability of exploration licenses has meant that explorers and producers are drawn to the small size, but frequent yield explorations on Holland's continental shelf. The excellent operation record of Rotterdam's Verolme Botlek yard; for repair and maintenance of offshore platforms and associated plant, is explored as the facility plans to diversify into newbuilding. The construction of an offshore basin designed for the hydrodynamic testing of offshore plant intended for deepwater use is described. The Netherlands maritime research institute (Marin) aims to stay at the forefront of offshore research and development with this new facility. Other articles cover pipe tensioning, new large linear winches and innovations in offshore drilling and production. (UK)

  17. The PROPEL Electrodynamic Tether Demonstration Mission

    Science.gov (United States)

    Bilen, Sven G.; Johnson, C. Les; Wiegmann, Bruce M.; Alexander, Leslie; Gilchrist, Brian E.; Hoyt, Robert P.; Elder, Craig H.; Fuhrhop, Keith P.; Scadera, Michael

    2012-01-01

    The PROPEL ("Propulsion using Electrodynamics") mission will demonstrate the operation of an electrodynamic tether propulsion system in low Earth orbit and advance its technology readiness level for multiple applications. The PROPEL mission has two primary objectives: first, to demonstrate the capability of electrodynamic tether technology to provide robust and safe, near-propellantless propulsion for orbit-raising, de-orbit, plane change, and station keeping, as well as to perform orbital power harvesting and formation flight; and, second, to fully characterize and validate the performance of an integrated electrodynamic tether propulsion system, qualifying it for infusion into future multiple satellite platforms and missions with minimal modification. This paper provides an overview of the PROPEL system and design reference missions; mission goals and required measurements; and ongoing PROPEL mission design efforts.

  18. High-Pressure Burning Rate Studies of Solid Rocket Propellants

    Science.gov (United States)

    2013-01-01

    monopropellant burning rate. The self-de§agration rates of neat AP are plotted in Fig. 2 for both pressed pellets and single crystals. There is agreement...rate data from various investigators: 1 ¡ [2]; pressed pellets : 2 ¡ [3], 3 ¡ [4], and 4 ¡ [2]; and single crystals: 5 ¡ [5], and 6 ¡ [6]. Line ¡ AP...7]. Strand or window burners have had more use in the solid propellant community. There are numerous types and styles of combustion vessels, but they

  19. Offshoring R&D

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Rasmussen, Lauge Baungaard

    2010-01-01

    Companies are increasingly offshoring R&D activities. Many firms, however, experience difficulties related to virtual teamwork across cultures and time zones. The research question is: How does increasing R&D offshoring impact transparency of communication structures and knowledge sharing? Using...... case studies from Danish multinational corporations with R&D activities in China, India or Eastern Europe this paper analyses the impact observed in these companies in regard to communication structures and knowledge sharing in management of offshored R&D activities. The findings show that companies...... attempt to increase transparency through formalisation of knowledge and clear communication structures. However, the influence of tacit knowledge, horizontal communication and culture seem largely overlooked. Therefore the authors suggest a context based approach to transparency accustomed...

  20. 78 FR 4038 - Critical Parts for Airplane Propellers

    Science.gov (United States)

    2013-01-18

    ... manufacturers are not required to provide information concerning propeller critical part design, manufacture, or... engineering, manufacturing, and service management processes should provide clear information for propeller... manufacture critical parts for airplane propellers update their manuals to record engineering, manufacture...

  1. Ionic liquid propellants: future fuels for space propulsion.

    Science.gov (United States)

    Zhang, Qinghua; Shreeve, Jean'ne M

    2013-11-11

    Use of green propellants is a trend for future space propulsion. Hypergolic ionic liquid propellants, which are environmentally-benign while exhibiting energetic performances comparable to hydrazine, have shown great potential to meet the requirements of developing nontoxic high-performance propellant formulations for space propulsion applications. This Concept article presents a review of recent advances in the field of ionic liquid propellants. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Numerical investigation of the high Reynolds number 3D flow field generated by a self-propelling manta ray

    Science.gov (United States)

    Pederzani, Jean-Noel; Haj-Hariri, Hossein

    2012-11-01

    An embedded-boundary (or cut-cell) method for complex geometry with moving boundaries is used to solve the three dimensional Navier-Stokes equation around a self-propelling manta swimming at moderately high Reynolds numbers. The motion of the ray is prescribed using a kinematic model fitted to actual biological data. The dependence of thrust production mechanism on Strouhal and Reynolds numbers is investigated. The vortex core structures are accurately plotted and a correlation between wake structures and propulsive performance is established. This insight is critical in understanding the key flow features that a bio-inspired autonomous vehicle should reproduce in order to swim efficiently. The solution method is implemented, on a block-structured Cartesian grid using a cut-cell approach enabling the code to correctly evaluate the wall shear-stress, a key feature necessary at higher Reynolds. To enhance computational efficiency, a parallel adaptive mesh refinement technique is used. The present method is validated against published experimental results. Supported by ONR MURI.

  3. Offshore Wind Energy Resource Assessment for Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Doubrawa Moreira, Paula [National Renewable Energy Lab. (NREL), Golden, CO (United States); Scott, George N. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walter D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kilcher, Levi F. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Draxl, Caroline [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lantz, Eric J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2018-01-02

    This report quantifies Alaska's offshore wind resource capacity while focusing on its unique nature. It is a supplement to the existing U.S. Offshore Wind Resource Assessment, which evaluated the offshore wind resource for all other U.S. states. Together, these reports provide the foundation for the nation's offshore wind value proposition. Both studies were developed by the National Renewable Energy Laboratory. The analysis presented herein represents the first quantitative evidence of the offshore wind energy potential of Alaska. The technical offshore wind resource area in Alaska is larger than the technical offshore resource area of all other coastal U.S. states combined. Despite the abundant wind resource available, significant challenges inhibit large-scale offshore wind deployment in Alaska, such as the remoteness of the resource, its distance from load centers, and the wealth of land available for onshore wind development. Throughout this report, the energy landscape of Alaska is reviewed and a resource assessment analysis is performed in terms of gross and technical offshore capacity and energy potential.

  4. Proceedings of the ENDOW workshop 'Offshore wakes: Measurements and modelling[Efficient Development of Offshore Windfarms

    Energy Technology Data Exchange (ETDEWEB)

    Barthelmie, R.J. (ed.)

    2002-03-01

    The papers presented in these Proceedings are the result of a workshop held at Risoe National Laboratory on March 7 and 8 2002 entitled 'Offshore Wakes: Measurements and Modelling'. The Workshop was arranged to showcase results of the European Community supported project 'Efficient Development of Offshore Windfarms (ENDOW)' and featured a series of eight presentations discussing modelling of wakes and boundary layers, existing and new measurements from offshore wind farms and how these will be linked in a new design tool and applied at planned offshore wind farms. In addition seven invited presentations covered a range of relevant topics from analytical approaches to fatigue and extreme loads in wind turbine clusters, current wake modelling in WAsP, optimising power production at Arklow Bank, Particle Image Velocimetry study of a wind turbine wake in a yaw, offshore wind measurements in Massachusetts, accuracy of SODAR measurements for wind energy and tidal influence of offshore wind speeds and turbulence. (au)

  5. Organizational Adaptation in Offshoring

    DEFF Research Database (Denmark)

    Geisler Asmussen, Christian; Møller Larsen, Marcus; Pedersen, Torben

    2016-01-01

    Offshoring offers managers the promise of substantial economic benefits, but also comes with the risk of increased complexity and coordination challenges. We argue that offshoring firms must accumulate architectural knowledge to keep the cost of coordination of the geographically separated activi...

  6. Offshore wind development research.

    Science.gov (United States)

    2014-04-01

    Offshore wind (OSW) development is a new undertaking in the US. This project is a response to : New Jerseys 2011 Energy Master Plan that envisions procuring 22.5% of the states power : originating from renewable sources by 2021. The Offshore Wi...

  7. Offshore Fish Community: Ecological Interactions | Science ...

    Science.gov (United States)

    The offshore (>80 m) fish community of Lake Superior is made up of predominately native species. The most prominent species are deepwater sculpin, kiyi, cisco, siscowet lake trout, burbot, and the exotic sea lamprey. Bloater and shortjaw cisco are also found in the offshore zone. Bloater is abundant in the offshore zone but appears restricted to depths shallower than 150 m (Selgeby and Hoff 1996; Stockwell et al. 2010), although it occuppied greater depths several decades ago (Dryer 1966; Peck 1977). Shortjaw is relatively rare in the offshore zone (Hoff and Todd 2004; Gorman and Hoff 2009; Gorman and Todd 2007). Lake whitefish is also known to frequent bathymetric depths >100 m (Yule et al. 2008b). In this chapter, we develop a conceptual model of the offshore food web based on data collected during 2001-2005 and on inferences from species interactions known for the nearshore fish community. We then develop a framework for examination of energy and nutrient movements within the pelagic and benthic habitats of the offshore zone and across the offshore and nearshore zones. To document research results.

  8. Offshore Wind Power Planning in Korea

    DEFF Research Database (Denmark)

    Seo, Chul Soo; Cha, Seung-Tae; Park, Sang Ho

    2012-01-01

    this possible, Korea has announced the National offshore power roadmap and is now in pursuit. However, large scale offshore wind farms can incur many problems, such as power quality problems, when connecting to a power system.[1][2] Thus, KEPCO is on the process of a research study to evaluate the effects...... that connecting offshore wind power generation to a power system has on the power system. This paper looks over offshore wind power planning in Korea and describes the development of impact assessment technology of offshore wind farms.......Wind power generation is globally recognized as the most universal and reliable form of renewable energy. Korea is currently depending mostly on coal and petroleum to generate electrical power and is now trying to replace them with renewable energy such as offshore wind power generation. To make...

  9. Hierarchical Self Organizing Map for Novelty Detection using Mobile Robot with Robust Sensor

    International Nuclear Information System (INIS)

    Sha'abani, M N A H; Miskon, M F; Sakidin, H

    2013-01-01

    This paper presents a novelty detection method based on Self Organizing Map neural network using a mobile robot. Based on hierarchical neural network, the network is divided into three networks; position, orientation and sensor measurement network. A simulation was done to demonstrate and validate the proposed method using MobileSim. Three cases of abnormal events; new, missing and shifted objects are employed for performance evaluation. The result of detection was then filtered for false positive detection. The result shows that the inspection produced less than 2% false positive detection at high sensitivity settings

  10. Offshore system for integration of the wind energy; Sistema offshore para integracao de energia eolica

    Energy Technology Data Exchange (ETDEWEB)

    Decker, Jan de [3E, Brussels (Belgium); Tambke, Jens [Universidade de Oldemburg (Germany). ForWind; Voelker, J. [Dena - Agencia Alema de Energia (Germany); Michalowska-Knap, Katarzyna [Instituto de Energia Renovavel (Poland)

    2010-09-15

    The Offshore Grid project aims to analyze the conditions required for the development of an offshore transmission network to integrate renewable energy (wind) to the national electrical systems, securely and efficiently. Regulatory aspects, technical, economic and political are considered, that will help the various players in the industry to have a common view on the offshore power grids in Europe.

  11. Advances in LO2 Propellant Conditioning

    Science.gov (United States)

    Mehta, Gopal; Orth, Michael; Stone, William; Perry, Gretchen; Holt, Kimberly; Suter, John

    1994-01-01

    This paper describes the cryogenic testing and analysis that has recently been completed as part of a multi-year effort to develop a new, more robust and operable LO2 propellant conditioning system. Phase 1 of the program consisted of feasibility demonstrations ot four novel propellant conditioning concepts. A no-bleed, passive propellant conditioning option was shown for the first time to successfully provide desired propellant inlet conditions. The benefits of passive conditioning are reduced operations costs, decreased hardware costs, enhanced operability and increased reliability on future expendable launch vehicles In Phase 2 of the test program, effects of major design parameters were studied and design correlation for future vehicle design were developed. Simultaneously, analytical models were developed and validated. Over 100 tests were conducted with a full-scale feedline using LN2 as the test fluid. A circulation pump provided a range of pressure and flow conditions. The test results showed that the passive propellant conditioning system is insensitive to variations in many of the parameters. The test program provides the validation necessary to incorporate the passive conditioning system into the baseline of future vehicles. Modeling of these systems using computational fluid dynamics seems highly promising.

  12. Design and simulation on the morphing composite propeller (Conference Presentation)

    Science.gov (United States)

    Chen, Fanlong; Li, Qinyu; Liu, Liwu; Lan, Xin; Liu, Yanju; Leng, Jinsong

    2017-04-01

    As one of the most crucial part of the unmanned underwater vehicle (UUV), the composite propeller plays an important role on the UUV's performance. As the composite propeller behaves excellent properties in hydroelastic facet and acoustic suppression, it attracts increasing attentions all over the globe. This paper goes a step further based on this idea, and comes up with a novel concept of "morphing composite propeller" (MCP) to improve the performance of the conventional composite propeller (CCP) to anticipate the improved propeller can perform better to propel the UUV. Based on the new concept, a novel MCP is designed. Each blade of the propeller is assembled with an active rotatable flap (ARF) to change the blade's local camber with flap rotation. Then the transmission mechanism (TM) has been designed and housed in the propeller blade to push the ARF. With the ARF rotating, the UUV can be propelled by different thrusts under certain rotation velocities of the propeller. Based on the design, the Fluent is exploited to analyze the fluid dynamics around the propeller. Finally, based on the design and hydrodynamic analysis, the structural response for the novel morphing composite propeller is calculated. The propeller blade is simplified and layered with composite materials. And the structure response of an MCP is obtained with various rotation angle under the hydrodynamic pressure. This simulation can instruct the design and fabrication techniques of the MCP.

  13. A New Coordinated Voltage Control Scheme for Offshore AC Grid of HVDC Connected Offshore Wind Power Plants

    DEFF Research Database (Denmark)

    Sakamuri, Jayachandra N.; Cutululis, Nicolaos Antonio; Rather, Zakir Hussain

    2015-01-01

    This paper proposes a coordinated voltage control scheme (CVCS) which enhances the voltage ride through (VRT) capability of an offshore AC grid comprised of a cluster of offshore wind power plants (WPP) connected through AC cables to the offshore voltage source converter based high voltage DC (VSC......-HVDC) converter station. Due to limited short circuit power contribution from power electronic interfaced variable speed wind generators and with the onshore main grid decoupled by the HVDC link, the offshore AC grid becomes more vulnerable to dynamic voltage events. Therefore, a short circuit fault...... in the offshore AC Grid is likely to have significant implications on the voltage of the offshore AC grid, hence on the power flow to the onshore mainland grid. The proposed CVCS integrates individual local reactive power control of wind turbines and of the HVDC converter with the secondary voltage controller...

  14. GIS DATA COLLECTION FOR OIL PALM (DaCOP) MOBILE APPLICATION FOR SMART PHONE

    OpenAIRE

    Abdullah, A. F.; Muhadi, N. A.

    2015-01-01

    Nowadays, smart phone has become a necessity as it offers more than just making a phone call. Smart phone combines the features of cell phone with other mobile devices such as personal digital assistant (PDA) and GPS navigation unit that propel the popularity of smart phones. In recent years, the interest in mobile communication has been increased. Previous research using mobile application has been successfully done in varies areas of study. Areas of study that have been done are health care...

  15. Responsiveness of observational and self-report methods for assessing disability in mobility in patients with osteoarthritis.

    NARCIS (Netherlands)

    Steultjens, M.P.M.; Roorda, L.D.; Dekker, J.; Bijlsma, J.W.J.

    2001-01-01

    Objective: To establish the responsiveness of observational and self-report methods for the assessment of disability in mobility in patients with osteoarthritis (OA). Methods: Data from 186 patients with hip OA of knee OA were used. Data from 1 observational method and 4 self-report methods for the

  16. Responsiveness of observational and self-report methods for assessing disability in mobility in patients with osteoarthritis

    NARCIS (Netherlands)

    Steultjens, M. P.; Roorda, L. D.; Dekker, J.; Bijlsma, J. W.

    2001-01-01

    To establish the responsiveness of observational and self-report methods for the assessment of disability in mobility in patients with osteoarthritis (OA). Data from 186 patients with hip OA or knee OA were used. Data from 1 observational method and 4 self-report methods for the assessment of

  17. Thermal Vacuum Test Correlation of A Zero Propellant Load Case Thermal Capacitance Propellant Gauging Analytics Model

    Science.gov (United States)

    McKim, Stephen A.

    2016-01-01

    This thesis describes the development and test data validation of the thermal model that is the foundation of a thermal capacitance spacecraft propellant load estimator. Specific details of creating the thermal model for the diaphragm propellant tank used on NASA's Magnetospheric Multiscale spacecraft using ANSYS and the correlation process implemented to validate the model are presented. The thermal model was correlated to within plus or minus 3 degrees Centigrade of the thermal vacuum test data, and was found to be relatively insensitive to uncertainties in applied heat flux and mass knowledge of the tank. More work is needed, however, to refine the thermal model to further improve temperature predictions in the upper hemisphere of the propellant tank. Temperatures predictions in this portion were found to be 2-2.5 degrees Centigrade lower than the test data. A road map to apply the model to predict propellant loads on the actual MMS spacecraft toward its end of life in 2017-2018 is also presented.

  18. Combustion characteristics of SMX and SMX based propellants

    Science.gov (United States)

    Reese, David A.

    This work investigates the combustion of the new solid nitrate ester 2,3-hydroxymethyl-2,3-dinitro-1,4-butanediol tetranitrate (SMX, C6H 8N6O16). SMX was synthesized for the first time in 2008. It has a melting point of 85 °C and oxygen balance of 0% to CO 2, allowing it to be used as an energetic additive or oxidizer in solid propellants. In addition to its neat combustion characteristics, this work also explores the use of SMX as a potential replacement for nitroglycerin (NG) in double base gun propellants and as a replacement for ammonium perchlorate in composite rocket propellants. The physical properties, sensitivity characteristics, and combustion behaviors of neat SMX were investigated. Its combustion is stable at pressures of up to at least 27.5 MPa (n = 0.81). The observed flame structure is nearly identical to that of other double base propellant ingredients, with a primary flame attached at the surface, a thick isothermal dark zone, and a luminous secondary flame wherein final recombination reactions occur. As a result, the burning rate and primary flame structure can be modeled using existing one-dimensional steady state techniques. A zero gas-phase activation energy approximation results in a good fit between modeled and observed behavior. Additionally, SMX was considered as a replacement for nitroglycerin in a double base propellant. Thermochemical calculations indicate improved performance when compared with the common double base propellant JA2 at SMX loadings above 40 wt-%. Also, since SMX is a room temperature solid, migration may be avoided. Like other nitrate esters, SMX is susceptible to decomposition over long-term storage due to the presence of excess acid in the crystals; the addition of stabilizers (e.g., derivatives of urea) during synthesis should be sufficient to prevent this. the addition of Both unplasticized and plasticized propellants were formulated. Thermal analysis of unplasticized propellant showed a distinct melt

  19. Acceptance of Using an Ecosystem of Mobile Apps for Use in Diabetes Clinic for Self-Management of Gestational Diabetes Mellitus.

    Science.gov (United States)

    Pais, Sarita; Parry, Dave; Petrova, Krassie; Rowan, Janet

    2017-01-01

    Mobile applications (apps) for self-management of diseases such as diabetes and for general well-being, including keeping track of food, diet, and exercise, are widely available. However, consumers face a flood of new mobile apps in the app stores and have no guidance from clinicians about choosing the appropriate app. As much as clinicians would like to support a patient-centered approach and promote health and wellness mobile apps, they may be unable to provide advice due to the lack of comprehensive and reliable app reviews. This research reviewed a selection of health and wellness mobile apps suitable for the self-management of gestational diabetes mellitus (GDM). A prototype of an ecosystem that integrated the data generated by the apps was built and its usefulness and ease of use were evaluated. The results show that the ecosystem can provide support for GDM self-management by sharing health and wellness data across the diabetes clinic.

  20. Offshore Wind Market and Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Bruce Duncan [Navigant Consulting, Inc., Chicago, IL (United States)

    2014-08-27

    This report is the third annual assessment of the U.S. offshore wind market. It includes the following major sections: Section 1: key data on developments in the offshore wind technology sector and the global development of offshore wind projects, with a particular focus on progress in the United States; Section 2: analysis of policy developments at the federal and state levels that have been effective in advancing offshore wind deployment in the United States; Section 3: analysis of actual and projected economic impact, including regional development and job creation; Section 4: analysis of developments in relevant sectors of the economy with the potential to affect offshore wind deployment in the United States

  1. Import, Offshoring and Wages

    DEFF Research Database (Denmark)

    Fosse, Henrik Barslund; Maitra, Madhura

    Offshoring firms are found to pay higher average wages than purely domestic firms. We provide a unifying empirical approach by capturing the different channels through which offshoring may explain this wage difference: (i) due to change in the composition of workers (skill composition effect) (ii......) because all existing workers get higher pay (rent sharing effect). Using Danish worker-firm data we explain how much each channel contributes to higher wages. To estimate the causal effect of offshoring on wages we use China’s accession to the WTO in December 2001 - and the soon after boom in Chinese...

  2. Development and validation of models for simulation of supercritical carbon dioxide Brayton cycles and application to self-propelling heat removal systems in boiling water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Venker, Jeanne

    2015-03-31

    The objective of the current work was to develop a model that is able to describe the transient behavior of supercritical carbon dioxide (sCO{sub 2}) Brayton cycles, to be applied to self-propelling residual heat removal systems in boiling water reactors. The developed model has been implemented into the thermohydraulic system code ATHLET. By means of this improved ATHLET version, novel residual heat removal systems, which are based on closed sCO{sub 2} Brayton cycles, can be assessed as a retrofit measure for present light water reactors. Transient simulations are hereby of great importance. The heat removal system has to be modeled explicitly to account for the interaction between the system and the behavior of the plant during different accident conditions. As a first step, transport and thermodynamic fluid properties of supercritical carbon dioxide have been implemented in ATHLET to allow for the simulation of the new working fluid. Additionally, a heat transfer correlation has been selected to represent the specific heat transfer of supercritical carbon dioxide. For the calculation of pressure losses due to wall friction, an approach for turbulent single phase flow has been adopted that is already implemented in ATHLET. In a second step, a component model for radial compressors has been implemented in the system code. Furthermore, the available model for axial turbines has been adapted to simulate the transient behavior of radial turbines. All extensions have been validated against experimental data. In order to simulate the interaction between the self-propelling heat removal system and a generic boiling water reactor, the components of the sCO{sub 2} Brayton cycle have been dimensioned with first principles. An available input deck of a generic BWR has then been extended by the residual heat removal system. The modeled application has shown that the extended version of ATHLET is suitable to simulate sCO{sub 2} Brayton cycles and to evaluate the introduced

  3. Potentials of a hybrid offshore farm for the island of Fuerteventura

    International Nuclear Information System (INIS)

    Veigas, M.; Iglesias, G.

    2014-01-01

    Highlights: • The island is committed to reduce its CO 2 emissions by developing renewable energy. • A hybrid wave-wind farm is proposed for taking advantage of both resources. • The energy output by means of the hybrid farm is quantified. • The impact caused on the nearshore wave climate was also investigated. - Abstract: The island of Fuerteventura (Spain), on its way towards energy self-sufficiency, is investing in renewable sources to produce green energy. In this manner the island, a UNESCO Biosphere Reserve, would be able to decrease its carbon footprint. Considering these goals, the main objective of this work is to investigate the output energy from renewable energy sources, and in particular, wave and offshore wind by means of the installation of a hybrid offshore wave-wind farm off the western coast of the island, where the resource is substantial. The farm, consisting of offshore wind turbines and co-located wave energy converters (WECs), would realise the synergies between wave and offshore wind energy. As a second objective, the impact caused on the nearshore climate in terms of deficit of wave height is investigated by means of the implementation of the SWAN model. It is found that, on the one hand, the impact generated is not very noticeable, and on the other hand, the produced energy constitutes an excellent approach to satisfying the energy needs of the island

  4. Technological learning in offshore wind energy: Different roles of the government

    International Nuclear Information System (INIS)

    Smit, Thijs; Junginger, Martin; Smits, Ruud

    2007-01-01

    Offshore wind energy is a promising source of renewable electricity, even though its current costs prevent large-scale implementation. Technological learning has improved the technology and its economic performance already, and could result in significant further improvements. This study investigates how technological learning takes place in offshore wind energy and how technological learning is related to different policy regimes. Offshore wind energy developments in Denmark and the United Kingdom have been analysed with a technology-specific innovation systems approach. The results reveal that the dominant forms of learning are learning by doing and learning by using. At the same time, learning by interacting is crucial to achieve the necessary binding elements in the technology-specific innovation system. Generally, most learning processes were performed by self-organizing entities. However, sometimes cultural and technical barriers occurred, excluding component suppliers and knowledge institutes from the innovation system. Danish policies successfully anticipated these barriers and removed them; therefore, the Danish policies can be characterized as pro-active. British policies shaped stable conditions for learning only; therefore, they can be characterized as active. In the future, barriers could hinder learning by interacting between the oil and gas industry, the offshore wind industry and academia. Based on this study, we suggest national and international policy makers to design long-term policies to anticipate these barriers, in order to contribute to technological learning

  5. The economics of offshore wind

    International Nuclear Information System (INIS)

    Green, Richard; Vasilakos, Nicholas

    2011-01-01

    This paper presents an overview of the main issues associated with the economics of offshore wind. Investment in offshore wind systems has been growing rapidly throughout Europe, and the technology will be essential in meeting EU targets for renewable energy in 2020. Offshore wind suffers from high installation and connection costs, however, making government support essential. We review various support policies used in Europe, concluding that tender-based feed-in tariff schemes, as used in Denmark, may be best for providing adequate support while minimising developers' rents. It may prove economic to build an international offshore grid connecting wind farms belonging to different countries that are sited close to each other. (author)

  6. The economics of offshore wind

    Energy Technology Data Exchange (ETDEWEB)

    Green, Richard; Vasilakos, Nicholas [Department of Economics, University of Birmingham, Birmingham B15 2TT (United Kingdom)

    2011-02-15

    This paper presents an overview of the main issues associated with the economics of offshore wind. Investment in offshore wind systems has been growing rapidly throughout Europe, and the technology will be essential in meeting EU targets for renewable energy in 2020. Offshore wind suffers from high installation and connection costs, however, making government support essential. We review various support policies used in Europe, concluding that tender-based feed-in tariff schemes, as used in Denmark, may be best for providing adequate support while minimising developers' rents. It may prove economic to build an international offshore grid connecting wind farms belonging to different countries that are sited close to each other. (author)

  7. NREL Offshore Balance-of-System Model

    Energy Technology Data Exchange (ETDEWEB)

    Maness, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Maples, Benjamin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-01-01

    The U.S. Department of Energy (DOE) has investigated the potential for 20% of nationwide electricity demand to be generated from wind by 2030 and, more recently, 35% by 2050. Achieving this level of wind power generation may require the development and deployment of offshore wind technologies. DOE (2008) has indicated that reaching these 2030 and 2050 scenarios could result in approximately 10% and 20%, respectively, of wind energy generation to come from offshore resources. By the end of 2013, 6.5 gigawatts of offshore wind were installed globally. The first U.S. project, the Block Island Wind Farm off the coast of Rhode Island, has recently begun operations. One of the major reasons that offshore wind development in the United States is lagging behind global trends is the high capital expenditures required. An understanding of the costs and associated drivers of building a commercial-scale offshore wind plant in the United States will inform future research and help U.S. investors feel more confident in offshore wind development. In an effort to explain these costs, the National Renewable Energy Laboratory has developed the Offshore Balance-of-System model.

  8. Offshore wind energy. An overview on the activities in Germany; Offshore-Windenergie. Ein Ueberblick ueber die Aktivitaeten in Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Worm, Anja [media consulta Deutschland GmbH, Berlin (Germany)

    2013-02-15

    The brochure under consideration provides an overview of the activities of offshore wind energy in Germany. The first offshore wind farms are built and generate more electricity than expected. The offshore wind farms serve as a field of learning for new technologies. The power of offshore wind farms opened new prospects for the economy. The northern Federal States of Germany as well as the traditional locations for mechanical engineering and steel production benefit from offshore wind energy.

  9. Development of a Marine Propeller With Nonplanar Lifting Surfaces

    DEFF Research Database (Denmark)

    Andersen, Poul; Friesch, Jürgen; Kappel, Jens J.

    2005-01-01

    The principle of non-planar lifting surfaces is applied to the design of modern aircraft wings to obtain better lift to drag ratios. Whereas a pronounced fin or winglet at the wingtip has been developed for aircraft, the application of the nonplanar principle to marine propellers, dealt...... with in this paper, has led to the KAPPEL propeller with blades curved toward the suction side integrating the fin or winglet into the propeller blade. The combined theoretical, experimental, and practical approach to develop and design marine propellers with nonplanar lifting surfaces has resulted in propellers...

  10. Changing of ballistic parameters from aged gun propellants

    NARCIS (Netherlands)

    Klerk, W.P.C. de; Driel, C.A. van

    2003-01-01

    The various properties of an SB and a DB gun propellant were investigated before and after artificial ageing. It was found that the decrease of nitrocellulose (NC) molecular weight, due to ageing of gun propellants, leads to a decrease of the mechanical integrity of the propellant grains. The effect

  11. Development of fast wireless detection system for fixed offshore platform

    Science.gov (United States)

    Li, Zhigang; Yu, Yan; Jiao, Dong; Wang, Jie; Li, Zhirui; Ou, Jinping

    2011-04-01

    Offshore platforms' security is concerned since in 1950s and 1960s, and in the early 1980s some important specifications and standards are built, and all these provide technical basis of fixed platform design, construction, installation and evaluation. With the condition that more and more platforms are in serving over age, the research about the evaluation and detection technology of offshore platform has been a hotspot, especially underwater detection, and assessment method based on the finite element calculation. For fixed platform structure detection, conventional NDT methods, such as eddy current, magnetic powder, permeate, X-ray and ultrasonic, etc, are generally used. These techniques are more mature, intuitive, but underwater detection needs underwater robot, the necessary supporting tools of auxiliary equipment, and trained professional team, thus resources and cost used are considerable, installation time of test equipment is long. This project presents a new kind of fast wireless detection and damage diagnosis system for fixed offshore platform using wireless sensor networks, that is, wireless sensor nodes can be put quickly on the offshore platform, detect offshore platform structure global status by wireless communication, and then make diagnosis. This system is operated simply, suitable for offshore platform integrity states rapid assessment. The designed system consists in intelligence acquisition equipment and 8 wireless collection nodes, the whole system has 64 collection channels, namely every wireless collection node has eight 16-bit accuracy of A/D channels. Wireless collection node, integrated with vibration sensing unit, embedded low-power micro-processing unit, wireless transceiver unit, large-capacity power unit, and GPS time synchronization unit, can finish the functions such as vibration data collection, initial analysis, data storage, data wireless transmission. Intelligence acquisition equipment, integrated with high

  12. Particularities of flat foundations for offshore wind power plants; Besonderheiten bei Flachgruendungen fuer Offshore-Windenergieanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Miehe, Alina; Hartwig, Udo [Ed. Zueblin AG, Stuttgart (Germany). Technologiezentrum Erneuerbare Energien, Zentrale Technik

    2012-07-01

    Interest in offshore wind energy installations has increased significantly in Germany and globally. In Germany only foundation structures secured by piles are currently being constructed. However, a gravity foundation has major advantages in particular because of the self-restoring effect. In this contribution the soil mechanical behaviour of a gravity foundation is described and the currently valid standards and regulations for the dimensioning of the foundation listed. It is clear that regulations for gravity foundations in particular still require development. With regard to the test foundation, which has already been described in detail in previous publications, there follows a brief description of the laboratory programme and a short summary of the latest test foundation results. (orig.)

  13. Danish offshore wind - Key environmental issues

    International Nuclear Information System (INIS)

    2006-11-01

    Danish experience from the past 15 years shows that offshore wind farms, if placed right, can be engineered and operated without significant damage to the marine environment and vulnerable species. The comprehensive environmental monitoring programmes of Horns Rev Offshore Wind Farm and Nysted Offshore Wind Farm confirm that, under the rieght conditions, even big wind farms pose low risk to birds, mammals and fish, even though there will be changes in the living conditions of some species by an increase in habitat heterogeneity. The monitoring also shows that appropriate siting of offshore wind farms is an essential precondition for ensuring limited impact on nature and the environment, and that careful spatial planning is necessary to avoid damaging cumulative impacts. Due consideration to limiting the impacts on nature together with positive attitudes towards offshore wind farms in local communities and challenging energy policy objectives at national and international levels mean that prospects look bright for future offshore expansion. (au)

  14. Laser-propelled ram accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Sasoh, A. [Tohoku Univ., Sendai (Japan). Inst. of Fluid Science

    2000-11-01

    The concept of 'laser-propelled ram accelerator (L-RAMAC)' is proposed. Theoretically it is capable of achieving a higher launch speed than that by a chemical ram accelerator because a higher specific energy can be input to the propellant gas. The laser beam is supplied through the muzzle, focused as an annulus behind the base of the projectile. The performance of L-RAMAC is analized based on generalized Rankine-Hugoniot relations, suggesting that a superorbital muzzle speed is achievable out of this device. (orig.)

  15. Propeller installation effects on turboprop aircraft acoustics

    Science.gov (United States)

    Chirico, Giulia; Barakos, George N.; Bown, Nicholas

    2018-06-01

    Propeller installation options for a twin-engined turboprop aircraft are evaluated at cruise conditions, aiming to identify the quieter configuration. Computational fluid dynamics is used to investigate the near-field acoustics and transfer functions are employed to estimate the interior cabin noise. Co-rotating and counter-rotating installation options are compared. The effect of propeller synchrophasing is also considered. The employed method captures the complexity of the acoustic field generated by the interactions of the propeller sound fields among each other and with the airframe, showing also the importance of simulating the whole problem to predict the actual noise on a flying aircraft. Marked differences among the various layouts are observed. The counter-rotating top-in option appears the best in terms of acoustics, the top-out propeller rotation leading to louder noise because of inflow conditions and the occurrence of constructive acoustic interferences. Synchrophasing is shown to be beneficial for co-rotating propellers, specially regarding the interior noise, because of favorable effects in the interaction between the propeller direct sound field and the noise due to the airframe. An angle closer to the maximum relative blade shift was found to be the best choice, yielding, however, higher sound levels than those provided by the counter-rotating top-in layout.

  16. Offshore Outsourcing

    DEFF Research Database (Denmark)

    Petersen, Bent; Benito, Gabriel R. G.; Dovgan, Olesya

    While the extant literature on offshore outsourcing deals with this operation mode in isolation, and typically with a focus on cost effects, we address the broader question of how companies choose and use outsourcing as part of foreign operation mode development and as a contributor to internatio...... that outsourcing can be used proactively to promote expanded international operations.......While the extant literature on offshore outsourcing deals with this operation mode in isolation, and typically with a focus on cost effects, we address the broader question of how companies choose and use outsourcing as part of foreign operation mode development and as a contributor...

  17. THE PROPELLER AND THE FROG

    International Nuclear Information System (INIS)

    Pan, Margaret; Chiang, Eugene

    2010-01-01

    'Propellers' in planetary rings are disturbances in ring material excited by moonlets that open only partial gaps. We describe a new type of co-orbital resonance that can explain the observed non-Keplerian motions of propellers. The resonance is between the moonlet underlying the propeller and co-orbiting ring particles downstream of the moonlet where the gap closes. The moonlet librates within the gap about an equilibrium point established by co-orbiting material and stabilized by the Coriolis force. In the limit of small libration amplitude, the libration period scales linearly with the gap azimuthal width and inversely as the square root of the co-orbital mass. The new resonance recalls but is distinct from conventional horseshoe and tadpole orbits; we call it the 'frog' resonance, after the relevant term in equine hoof anatomy. For a ring surface density and gap geometry appropriate for the propeller Bleriot in Saturn's A ring, our theory predicts a libration period of ∼4 years, similar to the ∼3.7 year period over which Bleriot's orbital longitude is observed to vary. These librations should be subtracted from the longitude data before any inferences about moonlet migration are made.

  18. Self-efficacy, pain, and quadriceps capacity at baseline predict changes in mobility performance over 2 years in women with knee osteoarthritis.

    Science.gov (United States)

    Brisson, Nicholas M; Gatti, Anthony A; Stratford, Paul W; Maly, Monica R

    2018-02-01

    This study examined the extent to which baseline measures of quadriceps strength, quadriceps power, knee pain and self-efficacy for functional tasks, and their interactions, predicted 2-year changes in mobility performance (walking, stair ascent, stair descent) in women with knee osteoarthritis. We hypothesized that lesser strength, power and self-efficacy, and higher pain at baseline would each be independently associated with reduced mobility over 2 years, and each of pain and self-efficacy would interact with strength and power in predicting 2-year change in stair-climbing performance. This was a longitudinal, observational study of women with clinical knee osteoarthritis. At baseline and follow-up, mobility was assessed with the Six-Minute Walk Test, and stair ascent and descent tasks. Quadriceps strength and power, knee pain, and self-efficacy for functional tasks were also collected at baseline. Multiple linear regression examined the extent to which 2-year changes in mobility performances were predicted by baseline strength, power, pain, and self-efficacy, after adjusting for covariates. Data were analyzed for 37 women with knee osteoarthritis over 2 years. Lower baseline self-efficacy predicted decreased walking (β = 1.783; p = 0.030) and stair ascent (β = -0.054; p baseline pain intensity/frequency predicted decreased walking performance (β = 1.526; p = 0.002). Lower quadriceps strength (β = 0.051; p = 0.015) and power (β = 0.022; p = 0.022) interacted with lesser self-efficacy to predict worsening stair ascent performance. Strategies to sustain or improve mobility in women with knee osteoarthritis must focus on controlling pain and boosting self-efficacy. In those with worse self-efficacy, developing knee muscle capacity is an important target.

  19. Usefulness of the Mobile Virtual Reality Self-Training for Overcoming a Fear of Heights.

    Science.gov (United States)

    Hong, Yeon-Ju; Kim, Hesun Erin; Jung, Young Hoon; Kyeong, Sunghyon; Kim, Jae-Jin

    2017-12-01

    A mobile virtual reality system, equipped with built-in variables such as heart rate (HR), gaze-down data, and subjective fear rating, can allow individuals with a fear of heights to overcome it by self-training. This study aimed to verify the efficacy and safety of the training program. Forty-eight volunteers completed the four-session self-training program over 2 weeks. They were allocated into either low- or high-fear group by the Acrophobia Questionnaire (AQ)-anxiety scores, and then the changes of the built-in variables and AQ-anxiety scores were analyzed between the groups. The safety was assessed using the Simulator Sickness Questionnaire (SSQ). The AQ-anxiety scores were significantly decreased after self-training in both groups, and the degree of decrease was significantly greater in the high-fear group than in the low-fear group. Gaze-down percentage and subjective fear rating showed a significant group difference, but HR did not. The SSQ scores were within the acceptable level. These results suggest that the training effect was greater in the high-fear group than in the low-fear group. This mobile program may be safely applicable to self-training for individuals with high scores on the fear of heights by repeated exposure to virtual environments with the embedded feedback system.

  20. Energy coefficients for a propeller series

    DEFF Research Database (Denmark)

    Olsen, Anders Smærup

    2004-01-01

    The efficiency for a propeller is calculated by energy coefficients. These coefficients are related to four types of losses, i.e. the axial, the rotational, the frictional, and the finite blade number loss, and one gain, i.e. the axial gain. The energy coefficients are derived by use...... of the potential theory with the propeller modelled as an actuator disk. The efficiency based on the energy coefficients is calculated for a propeller series. The results show a good agreement between the efficiency based on the energy coefficients and the efficiency obtained by a vortex-lattice method....

  1. Understanding Self-Directed Learning in the Context of Mobile Web 2.0--Case Study with Workplace Learners

    Science.gov (United States)

    Gu, Jia

    2016-01-01

    This paper presents the findings from a multiple-case study which has investigated the impact of mobile Web 2.0 technologies on self-directed learning (SDL) of workplace learners by exploring participants' learning experiences with a mobile App. Drawing on existing literatures, we examined learners' SDL personal attributes and process in the…

  2. Solid propellant processing factor in rocket motor design

    Science.gov (United States)

    1971-01-01

    The ways are described by which propellant processing is affected by choices made in designing rocket engines. Tradeoff studies, design proof or scaleup studies, and special design features are presented that are required to obtain high product quality, and optimum processing costs. Processing is considered to include the operational steps involved with the lining and preparation of the motor case for the grain; the procurement of propellant raw materials; and propellant mixing, casting or extrusion, curing, machining, and finishing. The design criteria, recommended practices, and propellant formulations are included.

  3. Low self-esteem elicits greater mobilization of attentional resources toward emotional stimuli.

    Science.gov (United States)

    Li, Haijiang; Yang, Juan

    2013-08-26

    Previous findings are generally consistent with the notion that individuals with low self-esteem tends to easily orient their attention on negative stimuli. The main objective of the present study was to further investigate the time course of attention deployment to positive (happy) and negative (angry) facial expressions in visual probe task using event-related potentials (ERP) technology in 15 high versus 15 low self-esteem participants while they viewed pairs of faces (e.g., happy face paired with neutral face or angry face paired with neutral face) shown for 500 ms and followed by a probe. Behavioral results showed that individuals with low self-esteem simply had faster manual reaction times on the entire task. ERP results showed that individuals with low self-esteem, but not high self-esteem, displayed increased P1 and N1 activity to both happy and angry facial expression. These findings suggest that emotional stimuli (angry faces and happy faces) elicited greater mobilization of attentional resources in individuals with low self-esteem. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  4. Purwarupa Sistem Integrasi Quadcopter dan Mobile Robot

    OpenAIRE

    Dharmawan, Andi; Lusiarta Putera, Christian Antonia

    2012-01-01

    AbstrakQuadcopter, juga dikenal sebagai quadrotor, adalah helikopter dengan empat motor yang dilengkapi dengan  empat buah propeller pada masing-masing motornya yang digunakan untuk terbang dan bermanuver. Pada quadcopter terdapat 3 variabel sudut yang menjadi element utama dalam pengendaliannya yaitu roll, pitch, dan yaw yang diperoleh dari penggabungan sensor accelerometer, gyroscope dan magnetometer dengan metode Direction Cosine Matrix. Pada sistem integrasi mobile robot dan quadcopter, d...

  5. 2016 Offshore Wind Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Musial, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Schwabe, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stehly, Tyler [National Renewable Energy Lab. (NREL), Golden, CO (United States); Spitsen, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-08-07

    The 2016 Offshore Wind Technologies Market Report is intended to provide stakeholders with quantitative information about the offshore wind market, technology, and cost trends in the United States and worldwide.

  6. 14 CFR 25.907 - Propeller vibration and fatigue.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Propeller vibration and fatigue. 25.907... vibration and fatigue. This section does not apply to fixed-pitch wood propellers of conventional design. (a... propeller to show that failure due to fatigue will be avoided throughout the operational life of the...

  7. 14 CFR 23.907 - Propeller vibration and fatigue.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Propeller vibration and fatigue. 23.907... General § 23.907 Propeller vibration and fatigue. This section does not apply to fixed-pitch wood... evaluation of the propeller to show that failure due to fatigue will be avoided throughout the operational...

  8. CFD for wind and tidal offshore turbines

    CERN Document Server

    Montlaur, Adeline

    2015-01-01

    The book encompasses novel CFD techniques to compute offshore wind and tidal applications. Computational fluid dynamics (CFD) techniques are regarded as the main design tool to explore the new engineering challenges presented by offshore wind and tidal turbines for energy generation. The difficulty and costs of undertaking experimental tests in offshore environments have increased the interest in the field of CFD which is used to design appropriate turbines and blades, understand fluid flow physical phenomena associated with offshore environments, predict power production or characterise offshore environments, amongst other topics.

  9. CFD simulation on Kappel propeller with a hull wake field

    DEFF Research Database (Denmark)

    Shin, Keun Woo; Andersen, Poul; Møller Bering, Rasmus

    2013-01-01

    Marine propellers are designed not for the open-water operation, but for the operation behind a hull due to the inhomogeneous hull wake and thrust deduction. The adaptation for the hull wake is important for the propulsive efficiency and cavitation risk especially on single-screw ships. CFD...... simulations for a propeller with a hull model have showed acceptable agreement with a model test result in the thrust and torque (Larsson et al. 2010). In the current work, a measured hull wake is applied to the simulation instead of modelling a hull, because the hull geometry is mostly not available...... for propeller designers and the computational effort can be reduced by excluding the hull. The CFD simulation of a propeller flow with a hull wake is verified in order to use CFD as a propeller design tool. A Kappel propeller, which is an innovative tip-modified propeller, is handled. Kappel propellers...

  10. EFD and CFD Characterization of a CLT Propeller

    Directory of Open Access Journals (Sweden)

    Daniele Bertetta

    2012-01-01

    Full Text Available In the present paper an experimental and numerical analysis of an unconventional CLT propeller is carried out. Two different numerical approaches, a potential panel method and an RANSE solver, are employed. Cavitation tunnel experiments are carried out in order to measure, as usual, thrust, torque, and cavity extension for different propeller working points. Moreover, LDV measurements are performed to have a deep insight into the complex wake behind the propeller and to analyze the dynamics of generated tip vortexes. The numerical/experimental analysis and comparison of results highlight the peculiarities of this kind of propellers, the possibility to increase efficiency and reduce cavitation risk, in order to exploit the design approaches already well proven for conventional propellers also in the case of these unconventional geometries.

  11. Experimental study of high-speed counter-rotation propeller on low speed wind range; Dojiku hantengata kosoku propeller no teisokuiki ni okeru fudo jikken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Collaborative research was conducted by National Aerospace Laboratory and Japan Aircraft Development Company in the period of fiscal 1988-1992 into methods for testing aircraft with advanced propeller in low-speed wind tunnel. The propulsion efficiency of the currently available high-bypass turbofan engine is approximately 60% in the vicinity of Mach number 0.85. Propeller-driven aircraft, whose propulsion efficiency is as high as 80% in the low Mach number domain, are scarcely in practical use in the domain of Mach number 0.75 or higher. There are studies reported abroad as well as in Japan for the propeller-driven aircraft to enjoy higher propeller propulsion efficiency even in the vicinity of Mach number 0.8 by modifying the propeller diameter, number of blades, and blade sections, etc. This paper describes the experimental research into the high-speed counter-rotation propeller. A counter-rotation propeller 0.3m in diameter and provided with coaxially arranged 8times2 SR-2 blades is evaluated for pitch angles during the takeoff and landing modes, for thrust characteristics at the pitch angle for the cruising mode, and for propeller backwash and noise. 15 refs., 72 figs., 9 tabs.

  12. Energy from Offshore Wind: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W.; Butterfield, S.; Ram, B.

    2006-02-01

    This paper provides an overview of the nascent offshore wind energy industry including a status of the commercial offshore industry and the technologies that will be needed for full market development.

  13. Technology of foamed propellants

    Energy Technology Data Exchange (ETDEWEB)

    Boehnlein-Mauss, Jutta; Kroeber, Hartmut [Fraunhofer Institut fuer Chemische Technologie ICT, Pfinztal (Germany)

    2009-06-15

    Foamed propellants are based on crystalline explosives bonded in energetic reaction polymers. Due to their porous structures they are distinguished by high burning rates. Energy content and material characteristics can be varied by using different energetic fillers, energetic polymers and porous structures. Foamed charges can be produced easily by the reaction injection moulding process. For the manufacturing of foamed propellants a semi-continuous remote controlled production plant in pilot scale was set up and a modified reaction injection moulding process was applied. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  14. Utilizing offshore potentials for wind power generation; Nutzung der Offshore-Potentiale fuer die Windenergie

    Energy Technology Data Exchange (ETDEWEB)

    Hannemann, H. [Neptun Industrie GmbH, Rostock (Germany)

    2000-07-01

    The contribution discusses the importance of the offshore market and recommends measures to develop it. A turnkey offer is required for exports, which means that all organisations cooperating in the pilot project must prove their competence. The status of a pilot project in the Baltic Sea and the further plans for the park (20 systems, 40 MW, more than 10 km off the coast, water depth about 20 m) are reviewed. [German] Zur Erschliessung des Offshore - Marktes fuer Windenergieanlagen ist es erforderlich, die Technologie ''vor der eigenen Haustuer'' demonstrieren zu koennen. Nach einer Betrachtung der europaeischen Offshore - Windenergie - Potentiale und der davon moeglicherweise nutzbaren Anteile wird die Bedeutung des Offshore - Marktes deutlich. Besonders fuer die Hersteller ist der Offshore - Markt fuer den langfristigen Export von besonderer Bedeutung. Um den Export zu realisieren, ist ein Turnkey - Angebot erforderlich, so dass im Pilotprojekt alle an der gesamten Realisation beteiligten Organisationen ihre Kompetenz beweisen muessen und koennen. Der Stand eines Pilotprojektes in der Ostsee und die weitere Planung fuer den Park (20 Anlagen, 40 MW, >10 km Kuestenentfernung, ca. 20 m Wassertiefe) wird dargestellt. (orig.)

  15. Establishing an independent mobile health program for chronic disease self-management support in bolivia.

    Science.gov (United States)

    Piette, John D; Valverde, Helen; Marinec, Nicolle; Jantz, Rachel; Kamis, Kevin; de la Vega, Carlos Lazo; Woolley, Timothy; Pinto, Bismarck

    2014-01-01

    Mobile health (m-health) work in low- and middle-income countries (LMICs) mainly consists of small pilot programs with an unclear path to scaling and dissemination. We describe the deployment and testing of an m-health platform for non-communicable disease (NCD) self-management support in Bolivia. Three hundred sixty-four primary care patients in La Paz with diabetes or hypertension completed surveys about their use of mobile phones, health and access to care. One hundred sixty-five of those patients then participated in a 12-week demonstration of automated telephone monitoring and self-management support. Weekly interactive voice response (IVR) calls were made from a platform established at a university in La Paz, under the direction of the regional health ministry. Thirty-seven percent of survey respondents spoke indigenous languages at home and 38% had six or fewer years of education. Eighty-two percent had a mobile phone, 45% used text messaging with a standard phone, and 9% had a smartphone. Smartphones were least common among patients who were older, spoke indigenous languages, or had less education. IVR program participants completed 1007 self-management support calls with an overall response rate of 51%. IVR call completion was lower among older adults, but was not related to patients' ethnicity, health status, or healthcare access. IVR health and self-care reports were consistent with information reported during in-person baseline interviews. Patients' likelihood of reporting excellent, very good, or good health (versus fair or poor health) via IVR increased during program participation and was associated with better medication adherence. Patients completing follow-up interviews were satisfied with the program, with 19/20 (95%) reporting that they would recommend it to a friend. By collaborating with LMICs, m-health programs can be transferred from higher-resource centers to LMICs and implemented in ways that improve access to self-management support among

  16. Establishing an Independent Mobile Health Program for Chronic Disease Self-Management Support in Bolivia

    Science.gov (United States)

    Piette, John D.; Valverde, Helen; Marinec, Nicolle; Jantz, Rachel; Kamis, Kevin; de la Vega, Carlos Lazo; Woolley, Timothy; Pinto, Bismarck

    2014-01-01

    Background: Mobile health (m-health) work in low- and middle-income countries (LMICs) mainly consists of small pilot programs with an unclear path to scaling and dissemination. We describe the deployment and testing of an m-health platform for non-communicable disease (NCD) self-management support in Bolivia. Methods: Three hundred sixty-four primary care patients in La Paz with diabetes or hypertension completed surveys about their use of mobile phones, health and access to care. One hundred sixty-five of those patients then participated in a 12-week demonstration of automated telephone monitoring and self-management support. Weekly interactive voice response (IVR) calls were made from a platform established at a university in La Paz, under the direction of the regional health ministry. Results: Thirty-seven percent of survey respondents spoke indigenous languages at home and 38% had six or fewer years of education. Eighty-two percent had a mobile phone, 45% used text messaging with a standard phone, and 9% had a smartphone. Smartphones were least common among patients who were older, spoke indigenous languages, or had less education. IVR program participants completed 1007 self-management support calls with an overall response rate of 51%. IVR call completion was lower among older adults, but was not related to patients’ ethnicity, health status, or healthcare access. IVR health and self-care reports were consistent with information reported during in-person baseline interviews. Patients’ likelihood of reporting excellent, very good, or good health (versus fair or poor health) via IVR increased during program participation and was associated with better medication adherence. Patients completing follow-up interviews were satisfied with the program, with 19/20 (95%) reporting that they would recommend it to a friend. Conclusion: By collaborating with LMICs, m-health programs can be transferred from higher-resource centers to LMICs and implemented in ways that

  17. Wind energy in offshore grids

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, S.T.

    2013-01-15

    This cumulative PhD thesis deals with wind integration in offshore grids from an economic point of view. It is composed of a generic part and eight papers. As the topic has mostly been analysed with a focus on topology and technical issues until now, market-operational questions in offshore grids and investment implications under different regulatory frameworks are a hitherto underrepresented research field. They are addressed by this thesis. Offshore grids between several countries combine the absorption of wind energy with international power trading. However, the inclusion into an offshore grid affects the economics of an offshore wind park. It is shown that the spot market income is lower if an offshore wind farm is placed in an interconnector and subject to nodal pricing instead of having a national affiliation. Moreover, congestion in the interconnector can prevent the wind farm from correcting its wind forecast errors in a specific onshore balancing group. An analytical approach with a transmission system operator and a wind farm as stakeholders illustrates resulting incentives for strategic behaviour. Depending on the regulatory regime, they may be inclined to announce more or less generation than expected at the closure of the day-ahead spot market. This can lead to a suboptimal utilisation of the infrastructure and associated socio-economic losses. These and possibly undesired reallocative effects between the parties can be avoided if the regulatory regime is adjusted to reflect special characteristics of offshore grids. With an operational real options approach, it is furthermore illustrated how different support schemes and connections to additional countries affect the investment case of an offshore wind farm and the income of the transmission system operator. The investment framework has also been addressed with a policy study about possible combinations of support schemes and international cooperation mechanisms between countries to achieve their

  18. IS OFFSHORING AN INTERNATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Gião

    2012-01-01

    Full Text Available This article proposes to analyze the applicability of transaction cost economics - TCE (Coase, 1937; Williamson, 1975, 1979 through its characteristic make-or-buy expression, considering the offshoring pace and emerging economy firms. The make-or-buy decision must be flexible enough to explain offshoring characteristics and developed and emerging economy firms scenarios. As secondary objectives, and to show the trail to the main purpose, two research questions were identified and discussed during the paper: Is offshoring process an international movement only from developed countries to emerging economies? Is the main reason of offshoring the looking for low-cost work / activities? To achieve the proposed objectives, the structure of this paper begins with a reasonable or acceptable definition of offshoring. Some reasons (or “the reason” for the process are also another important starting point. The majority of articles referee the idea that low-cost is the main reason for offshoring, and if it is correct, transaction cost economics seems to be a good basis for our analysis purpose and integrative intention. Also some literature connections between offshoring and TCE are presented and, naturally TCE is presented in highlights for understanding these connections. Ending this section, some different arguments based on newer researches are presented by some authors presenting another perspective as the main reason. After this theoretical approach, a scenario analysis and some discussions are presented based on all possible interactions among firm from developed (DC and emerging economies (EE and examples of international corporations are presented to clarify and improve the understanding of our research questions and to build new contributions to international business theory.

  19. Stress state reassessment of Romanian offshore structures taking into account corrosion influence

    Science.gov (United States)

    Joavină, R.; Zăgan, S.; Zăgan, R.; Popa, M.

    2017-08-01

    Progressive degradation analysis for extraction or exploration offshore structure, with appraisal of failure potential and the causes that can be correlated with the service age, depends on the various sources of uncertainty that require particular attention in design, construction and exploitation phases. Romanian self erecting platforms are spatial lattice structures consist of tubular steel joints, forming a continuous system with an infinite number of dynamic degrees of freedom. Reassessment of a structure at fixed intervals of time, recorrelation of initial design elements with the actual situation encountered in location and with structural behaviour represents a major asset in lowering vulnerabilities of offshore structure. This paper proposes a comparative reassessment of the stress state for an offshore structure Gloria type, when leaving the shipyard and at the end of that interval corresponding to capital revision, taking into account sectional changes due to marine environment corrosion. The calculation was done using Newmark integration method on a 3D model, asses of the dynamic loads was made through probabilistic spectral method.

  20. The Economic Geography of Offshoring

    DEFF Research Database (Denmark)

    Ørberg Jensen, Peter D.; Pedersen, Torben

    2011-01-01

    when distinguishing between standardized and advanced activities. Asia attracts as many advanced activities as Western Europe while North America attracts more advanced activities even in manufacturing. Central and Eastern Europe attract offshoring in manufacturing and IT, but the activities...... that are offshored to these regions are typically not advanced. One important theoretical implication of this study is that a more detailed understanding of the nature of offshored activities is needed, since such attributes appear to be an important determinant of location choice....

  1. Mobile Device Management horizons for CERN Managed iOS and Mac Self-Service

    CERN Multimedia

    CERN. Geneva; MUSZKOWSKI, Maciek; BIPPUS, Vincent Nicolas

    2015-01-01

    Overview of the MDM (Mobile Device Mamagement) market in the context of the CERN needs and a discussion of technical capabilities of a range of MDM products, followed by a presentation of two new functionalities implemented using an MDM: Self-service Kiosk for Mac and delegated-management solution for professional tablets.

  2. Mobile Health Apps to Facilitate Self-Care: A Qualitative Study of User Experiences.

    Science.gov (United States)

    Anderson, Kevin; Burford, Oksana; Emmerton, Lynne

    2016-01-01

    Consumers are living longer, creating more pressure on the health system and increasing their requirement for self-care of chronic conditions. Despite rapidly-increasing numbers of mobile health applications ('apps') for consumers' self-care, there is a paucity of research into consumer engagement with electronic self-monitoring. This paper presents a qualitative exploration of how health consumers use apps for health monitoring, their perceived benefits from use of health apps, and suggestions for improvement of health apps. 'Health app' was defined as any commercially-available health or fitness app with capacity for self-monitoring. English-speaking consumers aged 18 years and older using any health app for self-monitoring were recruited for interview from the metropolitan area of Perth, Australia. The semi-structured interview guide comprised questions based on the Technology Acceptance Model, Health Information Technology Acceptance Model, and the Mobile Application Rating Scale, and is the only study to do so. These models also facilitated deductive thematic analysis of interview transcripts. Implicit and explicit responses not aligned to these models were analyzed inductively. Twenty-two consumers (15 female, seven male) participated, 13 of whom were aged 26-35 years. Eighteen participants reported on apps used on iPhones. Apps were used to monitor diabetes, asthma, depression, celiac disease, blood pressure, chronic migraine, pain management, menstrual cycle irregularity, and fitness. Most were used approximately weekly for several minutes per session, and prior to meeting initial milestones, with significantly decreased usage thereafter. Deductive and inductive thematic analysis reduced the data to four dominant themes: engagement in use of the app; technical functionality of the app; ease of use and design features; and management of consumers' data. The semi-structured interviews provided insight into usage, benefits and challenges of health monitoring

  3. Offshore atomic power plants

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    Various merits of offshore atomic power plants are illustrated, and their systems are assessed. The planning of the offshore atomic power plants in USA is reviewed, and the construction costs of the offshore plant in Japan were estimated. Air pollution problem may be solved by the offshore atomic power plants remarkably. Deep water at low temperature may be advantageously used as cooling water for condensers. Marine resources may be bred by building artificial habitats and by providing spring-up equipments. In the case of floating plants, the plant design can be standardized so that the construction costs may be reduced. The offshore plants can be classified into three systems, namely artificial island system, floating system and sea bottom-based system. The island system may be realized with the present level of civil engineering, but requires the development of technology for the resistance of base against earthquake and its calculation means. The floating system may be constructed with conventional power plant engineering and shipbuilding engineering, but the aseismatic stability of breakwater may be a problem to be solved. Deep water floating system and deep water submerging system are conceivable, but its realization may be difficult. The sea bottom-based system with large caissons can be realized by the present civil engineering, but the construction of the caissons, stability against earthquake and resistance to waves may be problems to be solved. The technical prediction and assessment of new plant sites for nuclear power plants have been reported by Science and Technology Agency in 1974. The construction costs of an offshore plant has been estimated by the Ministry of International Trade and Industry to be yen71,026/kW as of 1985. (Iwakiri, K.)

  4. Offshoring and Changes in Firms’ Domestic Employment

    DEFF Research Database (Denmark)

    Timmermans, Bram; Østergaard, Christian Richter

    difference on a set of employment characteristics, i.e. employment growth, growth in high skilled employees, and growth in employees with a background in science and engineering, by using a partial propensity score matching approach. The findings of the analyses show that there are clear differences between......In this paper, we investigate, by merging the Danish linked employer-employee database with a Danish offshoring survey, the difference in employment between offshoring and non-offshoring firms that are active in manufacturing industries and business services in Denmark. We measure the mean...... Danish offshoring and non-offshoring firms in how the employee composition changes over time. The change in employment composition differ considerably between manufacturing industries and business services and on whether firms offshore administrative and technical business functions or other types...

  5. The Transforming Mobility Ecosystem: Enabling in Energy-Efficient Future

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-01-31

    Over the next decade, the transportation sector is poised for rapid change, propelled toward a new mobility future by strong technology currents and the confluence of prevailing megatrends. These major forces hold the promise of shaping a new mobility future – one that unlocks tremendous economic value, provides unprecedented gains in safety, offers affordable and equal accessibility, and enables the transition to energy-efficient transport of people and goods. They come, however, with cautionary viewpoints on energy consumption of the entire sector, necessitating the need to carefully guide the emergent future. This report examines four possible mobility futures that could exist in 2050 and the positive and negative impacts of these futures on energy consumption and the broader economy.

  6. The screw propeller

    Science.gov (United States)

    Larrabee, E. E.

    1980-07-01

    Marine and air screw propellers are considered in terms of theoretical hydrodynamics as developed by Joukowsky, Prandtl, and Betz. Attention is given to the flow around wings of finite span where spanwise flow exists and where lift and the bound vorticity must all go smoothly to zero at the wing tips. The concept of a trailing vortex sheet made up of infinitesimal line vortexes roughly aligned with the direction of flight is discussed in this regard. Also considered is induced velocity, which tends to convect the sheet downward at every stage in the roll-up process, the vortex theory of propellers and the Betz-Prandtl circulation distribution. The performance of the Gossamer Albatross and of a pedal-driven biplane called the Chrysalis are also discussed.

  7. Mobile phone messaging for facilitating self-management of long-term illnesses.

    Science.gov (United States)

    de Jongh, Thyra; Gurol-Urganci, Ipek; Vodopivec-Jamsek, Vlasta; Car, Josip; Atun, Rifat

    2012-12-12

    Long-term illnesses affect a significant proportion of the population in developed and developing countries. Mobile phone messaging applications, such as Short Message Service (SMS) and Multimedia Message Service (MMS), may present convenient, cost-effective ways of supporting self-management and improving patients' self-efficacy skills through, for instance, medication reminders, therapy adjustments or supportive messages. To assess the effects of mobile phone messaging applications designed to facilitate self-management of long-term illnesses, in terms of impact on health outcomes and patients' capacity to self-manage their condition. Secondary objectives include assessment of: user evaluation of the intervention; health service utilisation and costs; and possible risks and harms associated with the intervention. We searched the Cochrane Central Register of Controlled Trials (CENTRAL,The Cochrane Library 2009, Issue 2), MEDLINE (OvidSP) (January 1993 to June 2009), EMBASE (OvidSP) (January 1993 to June 2009), PsycINFO (OvidSP) (January 1993 to June 2009), CINAHL (EbscoHOST) (January 1993 to June 2009), LILACS (January 1993 to June 2009) and African Health Anthology (January 1993 to June 2009).We also reviewed grey literature (including trial registers) and reference lists of articles. We included randomised controlled trials (RCTs), quasi-randomised controlled trials (QRCTs), controlled before-after (CBA) studies, or interrupted time series (ITS) studies with at least three time points before and after the intervention. We selected only studies where it was possible to assess the effects of mobile phone messaging independent of other technologies or interventions. Two review authors independently assessed all studies against the inclusion criteria, with any disagreements resolved by a third review author. Study design features, characteristics of target populations, interventions and controls, and results data were extracted by two review authors and confirmed by

  8. NEW OFFSHORE LOCATIONS IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    RADULESCU IRINA GABRIELA

    2014-05-01

    Full Text Available The offshore activity provides benefits for the host market and has positive effects on services, and on producers that use intermediate services. FDI in services has an important impact on the offshore activity, especially through transfer of technology. Many transnational companies have recognized the advantages of offshoring and the fact that it becomes a key globalization force. Recently, the Central European countries have become popular destinations among offshoring

  9. Noise from offshore wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Soendergaard, B.; Plovsing, B.

    2005-07-01

    Noise assessment of wind turbines through calculations is based on sound power levels measured according to e.g. IEC 61400-11. With larger wind turbines and distances some of the calculation models give erroneous results. Noise propagation over water is different from propagation over land. For that reason it is important be able to make valid noise assessments for offshore wind farms. A suggestion for an offshore measurement method is described and a survey of models for noise propagation offshore has been made. (au)

  10. Investigation on utilization of liquid propellant in ballistic range experiments

    Energy Technology Data Exchange (ETDEWEB)

    Saso, Akihiro; Oba, Shinji; Takayama, Kazuyoshi [Tohoku University, Sendai (Japan)

    1999-10-31

    Experiments were conducted in a ballistic range using a HAN (hydroxylammonium nitrate)-based liquid monopropellant, LP1846. In a 25-mm-bore single-stage gun, using bulk-loaded propellant of 10 to 35 g, a muzzle speed up to 1.0 km/s was obtained. Time variations of propellant chamber pressures and in-tube projectile velocity profiles were measured. The liquid propellant combustion was initiated accompanying a delay time which was created due to the pyrolysis of the propellant. In order to obtain reliable ballistic range performance, the method of propellant loading was revealed to be critical. Since the burning rate of the liquid propellant is relatively low, the peak acceleration and the muzzle speed strongly depend on the rupture pressure of a diaphragm that was inserted between the launch tube and the propellant chamber. (author)

  11. Influence of occupational stress on mental health among Chinese off-shore oil workers.

    Science.gov (United States)

    Chen, Wei-Qing; Wong, Tze-Wai; Yu, Tak-Sun

    2009-09-01

    To explore the influence of occupational stress on mental health in off-shore oil production. A cross-sectional survey was conducted among 561 Chinese off-shore oil workers. The workers were invited to fill in a self-administered questionnaire exploring their socio-demographic characteristics, occupational stress levels, and 12-item general health questionnaire. A hierarchical multiple regression procedure was used to assess the effects of occupational stress on mental health. After controlling for age, educational level, marital status and years of off-shore work, poor mental health was found to have a significant positive association with seven of the nine identified sources of occupational stress. They were: conflict between job and family/social life, poor development of career and achievement at work, safety problems at work, management problems and poor relationship with others at work, poor physical environment of the work place, uncomfortable ergonomic factors at work, and poor organizational structure at work. All of these occupational stress sources together explained 19.9% of the total variance. The results confirmed that occupational stress was a major risk factor for poor mental health among Chinese off-shore oil workers. Reducing or eliminating occupational stressors at work would benefit workers' mental health.

  12. Burning properties and mechanical integrity of aged gun propellants

    NARCIS (Netherlands)

    Driel, C.A. van; Klerk, W.P.C. de

    2017-01-01

    Conventional gun propellants exhibit the phenomenon of nitrocellulose (NC) decomposition. Besides an effect on thermal stability of propellants, decomposition of NC has an effect on the mechanical integrity of the propellant grains. Enhanced grain fracture may lead to unacceptable changes of the

  13. Active matter beyond mean-field: ring-kinetic theory for self-propelled particles.

    Science.gov (United States)

    Chou, Yen-Liang; Ihle, Thomas

    2015-02-01

    Recently, Hanke et al. [Phys. Rev. E 88, 052309 (2013)] showed that mean-field kinetic theory fails to describe collective motion in soft active colloids and that correlations must not be neglected. Correlation effects are also expected to be essential in systems of biofilaments driven by molecular motors and in swarms of midges. To obtain correlations in an active matter system from first principles, we derive a ring-kinetic theory for Vicsek-style models of self-propelled agents from the exact N-particle evolution equation in phase space. The theory goes beyond mean-field and does not rely on Boltzmann's approximation of molecular chaos. It can handle precollisional correlations and cluster formation, which are both important to understand the phase transition to collective motion. We propose a diagrammatic technique to perform a small-density expansion of the collision operator and derive the first two equations of the Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) hierarchy. An algorithm is presented that numerically solves the evolution equation for the two-particle correlations on a lattice. Agent-based simulations are performed and informative quantities such as orientational and density correlation functions are compared with those obtained by ring-kinetic theory. Excellent quantitative agreement between simulations and theory is found at not-too-small noises and mean free paths. This shows that there are parameter ranges in Vicsek-like models where the correlated closure of the BBGKY hierarchy gives correct and nontrivial results. We calculate the dependence of the orientational correlations on distance in the disordered phase and find that it seems to be consistent with a power law with an exponent around -1.8, followed by an exponential decay. General limitations of the kinetic theory and its numerical solution are discussed.

  14. Colloidal Microworms Propelling via a Cooperative Hydrodynamic Conveyor Belt.

    Science.gov (United States)

    Martinez-Pedrero, Fernando; Ortiz-Ambriz, Antonio; Pagonabarraga, Ignacio; Tierno, Pietro

    2015-09-25

    We study propulsion arising from microscopic colloidal rotors dynamically assembled and driven in a viscous fluid upon application of an elliptically polarized rotating magnetic field. Close to a confining plate, the motion of this self-assembled microscopic worm results from the cooperative flow generated by the spinning particles which act as a hydrodynamic "conveyor belt." Chains of rotors propel faster than individual ones, until reaching a saturation speed at distances where induced-flow additivity vanishes. By combining experiments and theoretical arguments, we elucidate the mechanism of motion and fully characterize the propulsion speed in terms of the field parameters.

  15. Some characteristics of offshore operations

    Directory of Open Access Journals (Sweden)

    Popov Đorđe

    2011-01-01

    Full Text Available Offshore operations are not on the margins of the world economy. They are an integral part of modern business practice. They have become one of the most important instruments in the contemporary globalized financial system. Offshore operations and tax havens are not only conduits for tax avoidance and evasion but belong more broadly to the world of finance, for the business of managing the monetary resources of an organization, country or individuals. Offshore business operating in tax havens is at the heart of a particular type of globalization that is characterized by a growing gap between the very rich and everyone else. Tax havens are financial conduits that, in exchange for a fee, use their one principal asset- their sovereignty to serve a nonresident constituency of accountants and lawyers, bankers and financiers, who bring a demand for offshore operations.

  16. Learning Paths to Offshore Outsourcing

    DEFF Research Database (Denmark)

    Maskell, Peter; Pedersen, Torben; Petersen, Bent

    A corporation’s offshore outsourcing may be seen as the result of a discrete, strategic decision taken in response to an increasing pressure from worldwide competition. However, empirical evidence of a representative cross-sector sample of international Danish firms indicates that offshore sourcing...... in low-cost countries is best described as a learning-by-doing process in which the offshore outsourcing of a corporation goes through a sequence of stages towards sourcing for innovation. Initially, a corporation’s outsourcing is driven by a desire for cost minimization. Over a period of time...... the outsourcing experience lessens the cognitive limitations of decision-makers as to the advantages that can be achieved through outsourcing in low-cost countries: the insourcer/vendor may not only offer cost advantages, but also quality improvement and innovation. The quality improvements that offshore...

  17. Self-expression, group affiliation, pleasure and memory as predictors of consumer product attachment and satisfaction among mobile phone users

    Directory of Open Access Journals (Sweden)

    Kagiso Tlhabano

    2013-03-01

    Full Text Available In the post-purchase behaviour of a product, there are challenges with change in the degree of consumer product attachment, and these challenges affect consumer product satisfaction overtime. This study investigated how self-expression, group affiliation, memory, and demographic variables predicted consumer product attachment and satisfaction among mobile phone users in Ibadan. Three hundred students of the University of Ibadan were selected using convenient random selection. Their mean age was 20.7 and standard deviation of 2.52. A structured questionnaire consisting of the socio demographic section, measure of self-expression, group affiliation, memory, pleasure, consumer attachment and product satisfaction was used to collect the data. Using multiple regression analysis, the results showed that self-expression, group affiliation, memories and pleasure jointly predicted consumer attachment among mobile phone users, F (4,299 = 48.47; P<0.05 and they contributed 40% to the variance of consumer attachment. Self-expression (β = 0.26, t = 4.44, P<0.05, memory (β = 0.29, t = 4.97, P<0.05, and pleasure (β = 0.28, t =5.01, P<0.05 independently predicted consumer attachment while group affiliation did not. In addition, self- expression, group affiliation, memories and pleasure jointly predicted product satisfaction, F (4,299 =39.79; P<0.05 and they contributed 35% to the variance of product satisfaction. Pleasure (β=0.596, t =10.35, P<0.05 independently predicted product satisfaction while self-expression, group affiliation and memory did not. Furthermore, age, gender, mobile type, ethnicity and religion did not jointly and independently predict consumer product satisfaction. These findings have implication for mobile phone manufacturers in terms of product improvement and building a strategic marketing channel that would meet the needs of global consumers.

  18. Offshore field development. Statfjord - a geologist's dream: an economist's nightmare

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    On September 3, 1980, the water injection module was lifted on board the Statfjord A platform. That marks the completion of the platform, a giant 3,000,000 bpd capacity monster of an offshore structure, carrying a price tag of $1.5 billion. Two more such giants are scheduled to follow, each costing approximately $2 billion in the North Sea's largest and most expensive offshore field development ever. Oil wells in the Statfjord field, the largest North Sea field to date, are now producing at up to 30,000 bpd each. The reservoir proves particularly open, and the filling of it is extremely good. Wells have produced up to 40,000 bpd, but with that kind of flow, sand problems occur. Gravel packs have had to be installed in several of the wells. Mobil's Dallas facilities have uncovered the fact that now dominates the Norwegian North Sea scene, i.e., the cut off point for gas reinjection into the Statfjord sand is late 1985. After that point a possible breakthrough of gas could block the oil or even damage the reservoir if reinjection is continued.

  19. Offshore Wind Turbine Foundation Design

    OpenAIRE

    Passon, Patrik; Branner, Kim; Larsen, Søren Ejling; Hvenekær Rasmussen, Jørgen

    2015-01-01

    Offshore vindenergi er i høj grad modnet i det seneste årti med en årligt installeret kapacitet på mere end1 GW. En vigtig faktor for den videre udvikling af offshore vindenergi i stor målestok, er en reduktion af de samlede udgifter til produceret energi. I betragtning af for eksempel faldet i olieprisen siden sommeren 2014 og dens fortsatte fald ind i 2015, er det endnu vigtigere at sænke omkostningerne til etablering af vedvarende energikilder såsom offshore vindenergi, for at nå frem til ...

  20. Experimental Research on Air Propellers III

    Science.gov (United States)

    Durand, W F; Lesley, E P

    1920-01-01

    Report presents the results of wind tunnel tests of propellers that examined the influence of the following characteristics: (1) nominal pitch ratio 1.3 combined with a certain number of the more common or standard forms and proportions; (2) driving face slightly rounded or convex; (3) change in the location of the maximum thickness ordinate of the blade section; (4) pushing forward the leading edge of the blade, thus giving a rounded convex surface on the leading side of the driving face. (5) a series of values for the constant "angle of attack" in forming propellers with radially increasing pitch. In accordance with these purposes tests were carried out on 28 propellers.

  1. Shuttle APS propellant thermal conditioner study

    Science.gov (United States)

    Pearson, W. E.

    1971-01-01

    A study program was performed to allow selection of thermal conditioner assemblies for superheating O2 and H2 at supercritical pressures. The application was the auxiliary propulsion system (APS) for the space shuttle vehicle. The O2/H2 APS propellant feed system included propellant conditioners, of which the thermal conditioner assemblies were a part. Cryogens, pumped to pressures above critical, were directed to the thermal conditioner assembly included: (1) a gas generator assembly with ignition system and bipropellant valves, which burned superheated O2 and H2 at rich conditions; (2) a heat exchanger assembly for thermal conditioning of the cryogenic propellant; and (3) a dump nozzle for heat exchanger exhaust.

  2. Review and Analysis of Existing Mobile Phone Apps to Support Heart Failure Symptom Monitoring and Self-Care Management Using the Mobile Application Rating Scale (MARS).

    Science.gov (United States)

    Masterson Creber, Ruth M; Maurer, Mathew S; Reading, Meghan; Hiraldo, Grenny; Hickey, Kathleen T; Iribarren, Sarah

    2016-06-14

    Heart failure is the most common cause of hospital readmissions among Medicare beneficiaries and these hospitalizations are often driven by exacerbations in common heart failure symptoms. Patient collaboration with health care providers and decision making is a core component of increasing symptom monitoring and decreasing hospital use. Mobile phone apps offer a potentially cost-effective solution for symptom monitoring and self-care management at the point of need. The purpose of this review of commercially available apps was to identify and assess the functionalities of patient-facing mobile health apps targeted toward supporting heart failure symptom monitoring and self-care management. We searched 3 Web-based mobile app stores using multiple terms and combinations (eg, "heart failure," "cardiology," "heart failure and self-management"). Apps meeting inclusion criteria were evaluated using the Mobile Application Rating Scale (MARS), IMS Institute for Healthcare Informatics functionality scores, and Heart Failure Society of America (HFSA) guidelines for nonpharmacologic management. Apps were downloaded and assessed independently by 2-4 reviewers, interclass correlations between reviewers were calculated, and consensus was met by discussion. Of 3636 potentially relevant apps searched, 34 met inclusion criteria. Most apps were excluded because they were unrelated to heart failure, not in English or Spanish, or were games. Interrater reliability between reviewers was high. AskMD app had the highest average MARS total (4.9/5). More than half of the apps (23/34, 68%) had acceptable MARS scores (>3.0). Heart Failure Health Storylines (4.6) and AskMD (4.5) had the highest scores for behavior change. Factoring MARS, functionality, and HFSA guideline scores, the highest performing apps included Heart Failure Health Storylines, Symple, ContinuousCare Health App, WebMD, and AskMD. Peer-reviewed publications were identified for only 3 of the 34 apps. This review suggests

  3. Heat transfer in heterogeneous propellant combustion systems

    International Nuclear Information System (INIS)

    Brewster, M.Q.

    1992-01-01

    This paper reports that heat transfer plays an important role in several critical areas of heterogeneous, solid-propellant combustion systems. These areas include heat feedback to the propellant surface, heat transfer between burning aluminum droplets and their surroundings, heat transfer to internal insulation systems, and heat transfer to aft-end equipment. Gas conduction dominates heat feedback to the propellant surface in conventional ammonium perchlorate (AP) composite propellants, although particle radiative feedback also plays a significant role in combustion of metalized propellants. Particle radiation plays a dominant role in heat transfer to internal insulation, compared with that of convection. However, conduction by impingement of burning aluminum particles, which has not been extensively studied, may also be significant. Radiative heat loss plays an important role in determining the burning rate of molten aluminum particles due to a highly luminous, oxide particle-laden, detached flame envelope. Radiation by aluminum oxide smoke particles also plays a dominant role in heat transfer from the exhaust plume to aft-end equipment. Uncertainties in aluminum oxide particle-size distribution and optical properties still make it difficult to predict radiative plume heat transfer accurately from first principles

  4. The effect of short-term upper thoracic self-mobilization using a Kaltenborn wedge on pain and cervical dysfunction in patients with neck pain.

    Science.gov (United States)

    Oh, Hyung-Taek; Hwangbo, Gak

    2018-04-01

    [Purpose] The aim of this study was to determine the effect of short-term self-joint mobilization of the upper spine using a Kaltenborn wedge on the pain and cervical dysfunction of patients with neck pain. [Subjects and Methods] Twenty-seven patients with neck pain were divided into two groups; the self-mobilization group (SMG, n=13) and the self-stretching group (SSG, n=14). The SMG performed upper thoracic self-mobilization and the SSG performed self-stretching exercises as a short-term intervention for a week. To assess the degree of neck pain, the visual analog scale (VAS) was utilized, and to measure the joint range of motion at the flexion-extension, it was compared and analyzed by using the goniometer. [Results] Both SMG and SSG show a significant decrease in the visual analog scale and a significant increase in joint range of motion within the group. In the comparison of groups, there was no significant difference, but it indicated effects on improving the range of motion of extension in SMG. [Conclusion] Self-mobilization of the upper spine, using a Kaltenborn wedge, was useful in alleviating pain in and dysfunction of the cervical spine, and in particular, in improving cervical spine extension in this study.

  5. Development of Offshore Wind Power Industry

    Institute of Scientific and Technical Information of China (English)

    Liu Xiao

    2011-01-01

    The offshore wind power development target as initially proposed in "The 12=Five-Year" on energy recourses development and renewable energy recourses currently under development is to reach 5m KW by 2015 and 30m KW by 2020. With the unfolding of offshore wind turbine planning from different areas, the curtain of offshore wind power development for our country's "The 12=Five-Year" has been opened.

  6. Managing Risk Areas in Software Development Offshoring

    DEFF Research Database (Denmark)

    Persson, John Stouby; Schlichter, Bjarne Rerup

    2015-01-01

    Software companies are increasingly offshoring development to countries with high expertise at lower cost. Offshoring involves particular risk areas that if ignored increase the likelihood of failure. However, the offshoring client’s maturity level may influence the management of these risk areas...

  7. Positive technology: a free mobile platform for the self-management of psychological stress.

    Science.gov (United States)

    Gaggioli, Andrea; Cipresso, Pietro; Serino, Silvia; Campanaro, Danilo Marco; Pallavicini, Federica; Wiederhold, Brenda K; Riva, Giuseppe

    2014-01-01

    We describe the main features and preliminary evaluation of Positive Technology, a free mobile platform for the self-management of psychological stress (http://positiveapp.info/). The mobile platform features three main components: (i) guided relaxation, which provides the user with the opportunity of browsing a gallery of relaxation music and video-narrative resources for reducing stress; (ii) 3D biofeedback, which helps the user learning to control his/her responses, by visualizing variations of heart rate in an engaging 3D environment; (iii) stress tracking, by the recording of heart rate and self-reports. We evaluated the Positive Technology app in an online trial involving 32 participants, out of which 7 used the application in combination with the wrist sensor. Overall, feedback from users was satisfactory and the analysis of data collected online indicated the capability of the app for reducing perceived stress levels. A future goal is to improve the usability of the application and include more advanced stress monitoring features, based on the analysis of heart rate variability indexes.

  8. The effects of meshed offshore grids on offshore wind investment – a real options analysis

    DEFF Research Database (Denmark)

    Schröder, Sascha Thorsten; Kitzing, Lena

    2012-01-01

    Offshore wind farms in future meshed offshore grids could be subject to different regulatory regimes. Feed-in tariffs would absorb market risk from wind farm operators, whereas price premium mechanisms leave operators exposed to market price signals. In this case, it plays a decisive role which...... price applies to a node in an offshore grid. The offshore node will either be integrated into any of the neighbouring markets, with access to the respective maximum price, or be subject to separate nodal pricing. We investigate the different regulatory regimes for connections to one to four countries...... based on a stochastic model capturing uncertainties in prices and line failures. The stochastic analysis shows that in case the wind park is granted access to the respective maximum price, there is a significant option value connected to the operational flexibility of accessing several markets: The wind...

  9. The effects of meshed offshore grids on offshore wind investment – a real options analysis

    DEFF Research Database (Denmark)

    Schröder, Sascha Thorsten; Kitzing, Lena

    2012-01-01

    based on a stochastic model capturing uncertainties in prices and line failures. The stochastic analysis shows that in case the wind park is granted access to the respective maximum price, there is a significant option value connected to the operational flexibility of accessing several markets: The wind......Offshore wind farms in future meshed offshore grids could be subject to different regulatory regimes. Feed-in tariffs would absorb market risk from wind farm operators, whereas price premium mechanisms leave operators exposed to market price signals. In this case, it plays a decisive role which...... price applies to a node in an offshore grid. The offshore node will either be integrated into any of the neighbouring markets, with access to the respective maximum price, or be subject to separate nodal pricing. We investigate the different regulatory regimes for connections to one to four countries...

  10. Supporting Self-Assembly : the IKEA Effect on Mobile Health Persuasive Technology

    OpenAIRE

    Wang, Yunlong; Pfeil, Ulrike; Reiterer, Harald

    2016-01-01

    In this paper, we propose the idea of examining the effect of self-assembly on the success of mobile health persuasive technology. The IKEA effect shows that individuals evaluate products assembled by themselves more positively than pre-assembled products. The IKEA effect has been proven in several domains, e.g., in human robot interaction, where participants who assembled the robot evaluated the robot and the interaction with the robot more favorably than participants who did not assemble th...

  11. Traffic collisions between electric mobility devices (wheelchairs) and motor vehicles: Accidents, hubris, or self-destructive behavior?

    Science.gov (United States)

    LaBan, Myron M; Nabity, Thomas S

    2010-07-01

    This study had its genesis in a personally observed collision between a motor vehicle and a motorized wheelchair (electric mobility device) on a busy street in the middle of the block at an unmarked crossing. To the observer, at the time, this appeared to be a suicidal act. This investigation was initiated to both delineate the number of these crashes nationally and understand this phenomena as a potentially planned act of self-destruction. An initial survey of police reports was immediately frustrated by an inability to separate motor vehicle and electric mobility device collisions from the much larger group that involved ambulatory citizens because both types were classified together as "pedestrian" accidents. Instead, the search engine NexisLexis was used to identify 107 newspaper articles each of which described a motor vehicle and electric mobility device accident. In the motor vehicle and electric mobility device collisions, men predominated women (3:1 ratio) with an average age of 56 yrs. Sixty of these accidents were fatal. Ninety-four percent involved an electric mobility device and 6% a manual wheelchair. In 50% of the cases, the motor vehicle was a truck, van, or sport utility vehicle. Fifty percent occurred at dusk or dawn or at night. The electric mobility device occupant was cited as the guilty party in 39% of the cases and the driver of the motor vehicle in 27%. Twenty percent were unwitnessed hit-and-run accidents, whereas "no fault" was found in 8% of the cases. Although many accidents do happen by chance, when an electric mobility device operator openly challenges busy traffic by attempting to traverse it in the middle of the block at an unmarked crossing, predisposing psychosocial factors must also be considered. Hubris or premeditated self-destructive behavior or both need to be explored as preeminent issues with reference to the prodromal of the "accident process."

  12. Development of hydrazinium nitroformate based solid propellants

    NARCIS (Netherlands)

    Schöyer, H.F.R.; Schnorhk, A.J.; Korting, P.A.O.G.; Lit, P.J. van; Mul, J.M.; Gadiot, G.; Meulenbrugge, J.J.

    1995-01-01

    The development of new high-performance propellant combinations requires the establishment of safety and handling characteristics and thermodynamic decomposition and explosive properties. This paper addresses the early development phases of a new composite solid propellant based on HNF as oxidizer

  13. In-Space Propellant Production Using Water

    Science.gov (United States)

    Notardonato, William; Johnson, Wesley; Swanger, Adam; McQuade, William

    2012-01-01

    A new era of space exploration is being planned. Manned exploration architectures under consideration require the long term storage of cryogenic propellants in space, and larger science mission directorate payloads can be delivered using cryogenic propulsion stages. Several architecture studies have shown that in-space cryogenic propulsion depots offer benefits including lower launch costs, smaller launch vehicles, and enhanced mission flexibility. NASA is currently planning a Cryogenic Propellant Storage and Transfer (CPST) technology demonstration mission that will use existing technology to demonstrate long duration storage, acquisition, mass gauging, and transfer of liquid hydrogen in low Earth orbit. This mission will demonstrate key technologies, but the CPST architecture is not designed for optimal mission operations for a true propellant depot. This paper will consider cryogenic propellant depots that are designed for operability. The operability principles considered are reusability, commonality, designing for the unique environment of space, and use of active control systems, both thermal and fluid. After considering these operability principles, a proposed depot architecture will be presented that uses water launch and on orbit electrolysis and liquefaction. This could serve as the first true space factory. Critical technologies needed for this depot architecture, including on orbit electrolysis, zero-g liquefaction and storage, rendezvous and docking, and propellant transfer, will be discussed and a developmental path forward will be presented. Finally, use of the depot to support the NASA Science Mission Directorate exploration goals will be presented.

  14. Wave Run-Up on Offshore Windturbine Foundations

    DEFF Research Database (Denmark)

    Frigaard, Peter; De Vos, Leen

    2005-01-01

    In the last decade, several offshore wind-farms are built and offshore wind energy promises to be a suitable alternative to provide green energy. However, there still are some engineering challenges in placing the wind turbine foundations offshore. For example, unexpected damage to boat landing...

  15. Numerical Analysis of Ice Impacts on Azimuth Propeller

    Science.gov (United States)

    2013-09-01

    uniformity as one solid object, though the built-on process is recognized as well. The number of blades for this propeller varies to control cavitation ...Figure 7). The CRP allows the hydrodynamic advantage of regaining lost rotational energy from the first propeller, which is the conventional...it speeds flow through and accelerates it past the propellers. Decelerating duct slows the flow and allows for greatly reduced cavitation and

  16. China: an emerging offshore wind development hotspot. With a new assessment of China's offshore wind potential

    Energy Technology Data Exchange (ETDEWEB)

    Reinvang, Rasmus; Enslow, Rachel; Beaumont, Hubert

    2010-08-15

    This study provides new and more detailed estimates of the offshore wind energy resources in China, with particular focus on Southern China. The study points out that the offshore wind industry is ramping up in China with at least 11.9GW in the development pipeline per April 2010. The study estimates the offshore wind potential of China (excluding Taiwan) to 11,580TWh/year. The study proves estimates and wind energy resource maps per province. Fujian, Zhejiang and Hainan stand out with the highest offshore wind speeds in China while Guangdong also shows significant potential, with annual wind speed averages of 6.5-10.2m/s and an energy density range of 12-36GWh/km2. Even though current offshore wind development is mainly taking place in Fujian and Jiangsu, this study shows that the potential is likely even greater in other provinces. The study was developed by the Chinese Wind Energy Association (CWEA) and Sun Yat-sen University, and commissioned by WWF as part of a project funded by the Norwegian Agency of development Coopeartion (Norad). Methodology and constraints: The wind resource analysis improves upon previous studies in estimating the wind energy generation potential for offshore wind power in China, with available meteorological data adjusted for influence of typhoons. The study models how much energy offshore wind can produce along China's coast up to 100km from the shore by calculating the energy output of theoretical wind farms by applying the power curve of a 3MW turbine at a 100m hub height. In addition the study further expands by giving special consideration to the deep-sea offshore potential at +50m water depths. The study focuses particularly on the coastline from Shandong down to Hainan. The final results provide good indication of the offshore wind resource in China when comparing one area to the other. The report can therefore be used as a preliminary tool to identifying most interesting provinces and locations for offshore wind

  17. Weight Loss Associated With Different Patterns of Self-Monitoring Using the Mobile Phone App My Meal Mate.

    Science.gov (United States)

    Carter, Michelle C; Burley, Victoria J; Cade, Janet E

    2017-02-02

    Obesity is a major global public health issue due to its association with a number of serious chronic illnesses and its high economic burden to health care providers. Self-monitoring of diet has been consistently linked to weight loss. However, there is limited evidence about how frequently individuals need to monitor their diet for optimal weight loss. The aim of this paper is to describe app usage frequency and pattern in the mobile phone arm of a previously conducted randomized controlled trial. The relationship between frequency and pattern of electronic dietary self-monitoring and weight loss is also investigated. A randomized pilot trial comparing three methods of self-monitoring (mobile phone app, paper diary, Web-based) was previously conducted. Trial duration was 6 months. The mobile phone app My Meal Mate features an electronic food diary and encourages users to self-monitor their dietary intake. All food consumption data were automatically uploaded with a time and date stamp. Post hoc regression analysis of app usage patterns was undertaken in the My Meal Mate group (n=43; female: 77%, 33/43; white: 100%, 43/43; age: mean 41, SD 9 years; body mass index: mean 34, SD 4 kg/m 2 ) to explore the relationship between frequency and pattern of electronic dietary self-monitoring and weight loss. Baseline characteristics of participants were also investigated to identify any potential predictors of dietary self-monitoring. Regression analysis showed that those in the highest frequency-of-use category (recorded ≥129 days on the mobile phone app) had a -6.4 kg (95% CI -10.0 to -2.9) lower follow-up weight (adjusted for baseline weight) than those in the lowest frequency-of-use category (recorded ≤42 days; Pweight loss than other patterns of electronic self-monitoring (ie, monitoring over the short or moderate term and stopping and consistently monitoring over consecutive days). Participant characteristics such as age, baseline weight, sex, ethnicity

  18. Development of an advanced rocket propellant handler's suit

    Science.gov (United States)

    Doerr, DonaldF.

    2001-08-01

    Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (protective ensemble marked an advancement in the state-of-the-art in personal protective equipment. Not only was long duration environmental control provided, but it was done without a high pressure vessel. The unit met human performance needs for attitude independence, oxygen stability, and relief of heat stress. This supercritical air (and oxygen) technology is suggested for microgravity applications in life support such as the Extravehicular Mobility Unit.

  19. 2016 Offshore Wind Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Musial, Walter; Beiter, Philipp; Schwabe, Paul; Tian, Tian; Stehly, Tyler; Spitsen, Paul; Robertson, Amy; Gevorgian, Vahan

    2017-08-08

    The 2016 Offshore Wind Technologies Market Report was developed by the National Renewable Energy Laboratory (NREL) for the U.S. Department of Energy (DOE) and is intended to provide offshore wind policymakers, regulators, developers, researchers, engineers, financiers, and supply chain participants, with quantitative information about the offshore wind market, technology, and cost trends in the United States and worldwide. In particular, this report is intended to provide detailed information on the domestic offshore wind industry to provide context to help navigate technical and market barriers and opportunities. The scope of the report covers the status of the 111 operating offshore wind projects in the global fleet through December 31, 2016, and provides the status and analysis on a broader pipeline of 593 projects at some stage of development. In addition, this report provides a wider assessment of domestic developments and events through the second quarter of 2017 to provide a more up-to-date discussion of this dynamically evolving industry.

  20. AN AIRPLANE WITH UNCONVENTIONALLY PLACED PROPELLER POWER UNIT

    Directory of Open Access Journals (Sweden)

    Jan Červinka

    2017-02-01

    Full Text Available The significance of the influence of operating propellers on the aircraft aerodynamic characteristics is well-known. Wind tunnel testing of an airplane model with operating propellers is a complex task regarding the required similarity of the full-scale and the model case. Matching sufficient similarity in axial and rotational velocities in the propeller slipstream is the primordial condition for the global aerodynamic similarity of the windtunnel testing. An example of the model power units with related devices is presented. Examples of the wind tunnel testing results illustrate the extent of the propeller influence on aerodynamic characteristics of an aircraft of unconventional configuration with power units positioned at the fuselage afterbody.

  1. Wearable Therapy - Detecting Information from Wearables and Mobiles that are Relevant to Clinical and Self-directed Therapy.

    Science.gov (United States)

    Arnrich, Bert; Ersoy, Cem; Mayora, Oscar; Dey, Anind; Berthouze, Nadia; Kunze, Kai

    2017-01-09

    This accompanying editorial provides a brief introduction into the focus theme "Wearable Therapy". The focus theme "Wearable Therapy" aims to present contributions which target wearable and mobile technologies to support clinical and self-directed therapy. A call for papers was announced to all participants of the "9th International Conference on Pervasive Computing Technologies for Healthcare" and was published in November 2015. A peer review process was conducted to select the papers for the focus theme. Six papers were selected to be included in this focus theme. The paper topics cover a broad range including an approach to build a health informatics research program, a comprehensive literature review of self-quantification for health self-management, methods for affective state detection of informal care givers, social-aware handling of falls, smart shoes for supporting self-directed therapy of alcohol addicts, and reference information model for pervasive health systems. More empirical evidence is needed that confirms sustainable effects of employing wearable and mobile technology for clinical and self-directed therapy. Inconsistencies between different conceptual approaches need to be revealed in order to enable more systematic investigations and comparisons.

  2. Mobile therapy: case study evaluations of a cell phone application for emotional self-awareness.

    Science.gov (United States)

    Morris, Margaret E; Kathawala, Qusai; Leen, Todd K; Gorenstein, Ethan E; Guilak, Farzin; Labhard, Michael; Deleeuw, William

    2010-04-30

    Emotional awareness and self-regulation are important skills for improving mental health and reducing the risk of cardiovascular disease. Cognitive behavioral therapy can teach these skills but is not widely available. This exploratory study examined the potential of mobile phone technologies to broaden access to cognitive behavioral therapy techniques and to provide in-the-moment support. We developed a mobile phone application with touch screen scales for mood reporting and therapeutic exercises for cognitive reappraisal (ie, examination of maladaptive interpretations) and physical relaxation. The application was deployed in a one-month field study with eight individuals who had reported significant stress during an employee health assessment. Participants were prompted via their mobile phones to report their moods several times a day on a Mood Map-a translation of the circumplex model of emotion-and a series of single-dimension mood scales. Using the prototype, participants could also activate mobile therapies as needed. During weekly open-ended interviews, participants discussed their use of the device and responded to longitudinal views of their data. Analyses included a thematic review of interview narratives, assessment of mood changes over the course of the study and the diurnal cycle, and interrogation of this mobile data based on stressful incidents reported in interviews. Five case studies illustrate participants' use of the mobile phone application to increase self-awareness and to cope with stress. One example is a participant who had been coping with longstanding marital conflict. After reflecting on his mood data, particularly a drop in energy each evening, the participant began practicing relaxation therapies on the phone before entering his house, applying cognitive reappraisal techniques to cope with stressful family interactions, and talking more openly with his wife. His mean anger, anxiety and sadness ratings all were lower in the second half

  3. Self-Management Interventions to Prevent Depression in People with Mobility Limitations

    Directory of Open Access Journals (Sweden)

    Simon J. Driver

    2016-01-01

    Full Text Available Introduction This focused review reports on the impact of self-management interventions on depression in people with a mobility disability. Method There were two phases to the search including a comprehensive scoping review of the literature examining multiple secondary conditions impacted by self-management programs (Phase 1 and a focused review of the literature detailing the impact of self-management interventions on depression (Phase 2. CINAHL, PubMed, and PsyclNFO were searched for articles published between January 1988 through August 2014 and studies were screened by the first author based on specific inclusion and exclusion criteria. Results Twenty-five studies met criteria with results, demonstrating a mixed effect of self-management programs on depression. Sixteen studies included an intervention and control/comparison group, of which eight (50% had a significant effect on depression. A further nine studies did not include a control/comparison group and five found significant changes in depression and four found no change. Eighteen out of 25 studies (72% were rated as having moderate-to-high bias and nine different outcome measures were used across studies. Discussion Based on the mixed findings and varied approaches adopted for intervention and outcome assessment, future research should adopt a more rigorous methodological approach to examine self-management interventions on depression.

  4. Self-expression and relationship formation in high relational mobility environments: A study of dual users of American and Japanese social networking sites.

    Science.gov (United States)

    Takemura, Kosuke; Suzuki, Satoko

    2017-06-01

    This study proposes that self-expression motivation, an aspect of independent/individualistic psychological tendencies, aids in the formation of social relationships when social relationships are open and mobile. In societies characterised by high relational mobility (e.g., North America), which creates market-like competition in social relationships, individuals must express their uniqueness and worthiness to form new social relationships. Self-expression motivation has a relatively weak effect on relationship formation in low relational mobility societies (e.g., Japan), where social relationships are generally predetermined. This hypothesis was examined and supported through a study on dual users of two social networking sites-Facebook and Mixi (the "Facebook of Japan"). As expected, relational mobility was higher on Facebook than on Mixi. Moreover, the association between self-expression motivation and the number of new friends met on Facebook/Mixi was more positive for Facebook than it was for Mixi. The social functionality of independent tendencies is then discussed. © 2015 International Union of Psychological Science.

  5. Green plasticizers for multibase gun propellants (Lecture)

    NARCIS (Netherlands)

    Schoolderman, C.; Driel, C.A. van; Zebregs, M.

    2007-01-01

    TNO Defence, Security and Safety has a long history of research on gun propellants. Areas investigated are formulating (new ingredients, optimization), manufacturing, charge design and lifetime assessment [1,2,3,4,5]. In conventional propellants inert plasticizers are used to alter performance,

  6. Small-Scale Shock Testing of Propellants and Ingredients

    National Research Council Canada - National Science Library

    Dawley, S

    2004-01-01

    .... The use of small-scale gap testing to evaluate the shock sensitivity of individual propellant ingredients and propellant formulations is a valuable method for experimentally establishing shock...

  7. Effects of superhydrophobic surface on the propeller wake

    Science.gov (United States)

    Choi, Hongseok; Lee, Jungjin; Park, Hyungmin

    2017-11-01

    This study investigates the change in propeller wake when the superhydrophobic surface is applied on the propeller blade. The propeller rotates in a quiescent water tank, facing its bottom, with a rotational Reynolds number of 96000. To measure the three-dimensional flow fields, we use stereo PIV and a water prism is installed at the camera-side tank wall. Two cameras are tilted 30 degrees from the normal axis of the tank wall, satisfying schiempflug condition. Superhydrophobic surface is made by coating hydrophobic nanoparticles on the propeller blade. Measurements are done on two vertical planes (at the center of propeller hub and the blade tip), and are ensemble averaged being classified by blade phase of 0 and 90 degrees. Velocity fluctuation, turbulent kinetic energy, and vorticity are evaluated. With superhydrophobic surface, it is found that the turbulence level is significantly (20 - 30 %) reduced with a small penalty (less than 5%) in the streamwise momentum (i.e., thrust) generation. This is because the cone shaped propeller wake gets narrower and organized vortex structures are broken with the superhydrophobic surfaces. More detailed flow analysis will be given. Supported by NRF (NRF-2016R1C1B2012775, NRF-2016M2B2A9A02945068) programs of Korea government.

  8. Supercritical Fluid Processing of Propellant Polymers

    Science.gov (United States)

    1991-01-01

    of insoluble material present in the polymeric neopentyl glycol azelate (NPGA) binder. Laub (2) summarizes (from Refs 3 & 4) the various polymeric...binders used in composite propellant formulations for DOD missile systems. e.g., these include: polyneopentyl glycol azelate (NPGA) in HAWK. hydroxy...systems. Composite smokeless propellants containing polyethylene glycol (PEG), polyethylene glycol adepate (PEGA) and polycaprolactone are currently under

  9. Poor-to-moderate agreement between self and proxy interviews of mobile phone use.

    Science.gov (United States)

    Hutter, Hans-Peter; Ehrenhöfer, Lisa; Freuis, Edith; Hartl, Patrik; Kundi, Michael

    2012-10-01

    In epidemiological studies, cases cannot always be interviewed due to them being too ill or already deceased. Under these circumstances, proxy interviews are often conducted; however, the veridicality of information about mobile phone use gained by proxy interviews has been doubted. The issue is undecided due to the lack of empirical data. We conducted a study of 119 heterosexual couples. Both partners answered two questionnaires about mobile phone use, one about their own use and one about their partner's use. Overall agreement assessed using Cohen's kappa, Passing and Bablok regression, and concordance coefficients between self and proxy data was poor to moderate (e.g., concordance coefficients of 0.55 for duration of use). The only item with good agreement was whether or not a prepaid phone was used (Cohen's kappa 0.78 and 0.63 for male and female estimates, respectively), and to a lesser degree, the onset of mobile phone use (concordance coefficients of 0.66 and 0.61). Poorest agreement was obtained for the side of the head the mobile phone was held during calls (kappa coefficients of 0.20 and 0.24 for female and male estimates, respectively). We conclude that the assessment of mobile phone use by proxy data cannot be relied on except for information about onset of mobile phone use, use of prepaid or contract phones, and, to a lesser degree, duration of daily use. Agreement concerning the important information about side of the head the mobile phone is held during calls was poorest and only slightly better than chance. Copyright © 2012 Wiley Periodicals, Inc.

  10. Offshore Fish Community: Ecological Interactions

    Science.gov (United States)

    The offshore (>80 m) fish community of Lake Superior is made up of predominately native species. The most prominent species are deepwater sculpin, kiyi, cisco, siscowet lake trout, burbot, and the exotic sea lamprey. Bloater and shortjaw cisco are also found in the offshore zone...

  11. Offshore wind power in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Holttinen, H. [VTT Energy, Espoo (Finland)

    1998-12-31

    The objectives of the project were to estimate the technical offshore wind power potential of the Gulf of Bothnia, with cost assessments, to study icing conditions and ice loads, and to design a foundation suitable for the environmental conditions. The technical offshore potential from Vaasa to Tornio is huge, more than 40 TWh/a, although the cost of offshore wind power is still higher than on land. Wind turbines have not previously been designed for the icing conditions found in Gulf of Bothnia and the recommendations for load cases and siting of megawatt-class turbines are an important result of the project. (orig.)

  12. HMX based enhanced energy LOVA gun propellant

    Energy Technology Data Exchange (ETDEWEB)

    Sanghavi, R.R. [High Energy Materials Research Laboratory, Pune 411021 (India)]. E-mail: sanghavirr@yahoo.co.uk; Kamale, P.J. [High Energy Materials Research Laboratory, Pune 411021 (India); Shaikh, M.A.R. [High Energy Materials Research Laboratory, Pune 411021 (India); Shelar, S.D. [High Energy Materials Research Laboratory, Pune 411021 (India); Kumar, K. Sunil [High Energy Materials Research Laboratory, Pune 411021 (India); Singh, Amarjit [High Energy Materials Research Laboratory, Pune 411021 (India)

    2007-05-08

    Efforts to develop gun propellants with low vulnerability have recently been focused on enhancing the energy with a further improvement in its sensitivity characteristics. These propellants not only prevent catastrophic disasters due to unplanned initiation of currently used gun propellants (based on nitrate esters) but also realize enhanced energy levels to increase the muzzle velocity of the projectiles. Now, in order to replace nitroglycerine, which is highly sensitive to friction and impact, nitramines meet the requirements as they offer superior energy due to positive heat of formation, typical stoichiometry with higher decomposition temperatures and also owing to negative oxygen balance are less sensitive than stoichiometrically balanced NG. RDX has been widely reported for use in LOVA propellant. In this paper we have made an effort to present the work on scantily reported nitramine HMX based LOVA gun propellant while incorporating energetic plasticizer glycidyl azide polymer to enhance the energy level. HMX is known to be thermally stable at higher temperature than RDX and also proved to be less vulnerable to small scale shaped charge jet attack as its decomposition temperature is 270 deg. C. HMX also offers improved impulse due to its superior heat of formation (+17 kcal/mol) as compared to RDX (+14 kcal/mol). It has also been reported that a break point will not appear until 35,000 psi for propellant comprising of 5 {mu}m HMX. Since no work has been reported in open literature regarding replacement of RDX by HMX, the present studies were carried out.

  13. Offshore petroleum engineering task force report

    International Nuclear Information System (INIS)

    Ruelokke, M.

    1999-05-01

    The Offshore Petroleum Engineering Task Force was established in July 1998 in response to concerns about Newfoundland and Labrador's share of offshore petroleum engineering activity, with the aim of determining the current capability of the local sector, the demand for such companies and individuals until the year 2010, their capability to grow over that time-frame, and requirements in order to achieve that growth. The report summarizes the analysis undertaken by the Task Force as well as the conclusions it reached and associated recommendations. Section two provides an overview of the offshore engineering activity, including its origins, structure, and key success factors, and its also provides a profile of the industry, internationally, in Canada and in Newfoundland. Section three presents an analysis of the future demand for offshore engineering in Newfoundland until 2010, based on three development scenarios. Section four based on a Consulting Engineers of Newfoundland and Labrador (CENL) survey, establishes the present offshore engineering capacity and capabilities within the province. Section five examines current education and training programs and their ability to respond to future demands. Section six summarizes the conclusions of the analysis and presents recommendations designed to facilitate and promote the development of the local offshore engineering industry. 6 figs

  14. Grid Integration of Offshore Wind | Wind | NREL

    Science.gov (United States)

    Grid Integration of Offshore Wind Grid Integration of Offshore Wind Much can be learned from the existing land-based integration research for handling the variability and uncertainty of the wind resource Arklow Bank offshore wind park consists of seven GE Wind 3.6-MW wind turbines. Integration and

  15. Prediction of propeller-induced hull-pressure fluctuations

    NARCIS (Netherlands)

    Van Wijngaarden, H.C.J.

    2011-01-01

    The cavitating propeller often forms the primary source of noise and vibration on board ships. The propeller induces hydroacoustic pressure fluctuations due to the passing blades and, more importantly, the dynamic activity of cavities in the propeller’s immediate vicinity. The accurate prediction of

  16. Considerations for the Development of Mobile Phone Apps to Support Diabetes Self-Management: Systematic Review.

    Science.gov (United States)

    Adu, Mary D; Malabu, Usman H; Callander, Emily J; Malau-Aduli, Aduli Eo; Malau-Aduli, Bunmi S

    2018-06-21

    There is increased research interest in the use of mobile phone apps to support diabetes management. However, there are divergent views on what constitute the minimum standards for inclusion in the development of mobile phone apps. Mobile phone apps require an evidence-based approach to development which will consequently impact on their effectiveness. Therefore, comprehensive information on developmental considerations could help designers and researchers to develop innovative and effective patient-centered self-management mobile phone apps for diabetes patients. This systematic review examined the developmental considerations adopted in trials that engaged mobile phone applications for diabetes self-management. A comprehensive search strategy was implemented across 5 electronic databases; Medline, Scopus, Social Science Citation Index, the Cochrane Central Register of Controlled Trials and Cumulative Index of Nursing and Allied Health Literature (CINALHL) and supplemented by reference list from identified studies. Study quality was evaluated using the Joanna Briggs Critical appraisal checklist for trials. Information on developmental factors (health behavioral theory, functionality, pilot testing, user and clinical expert involvements, data privacy and app security) were assessed across experimental studies using a template developed for the review. A total of 11 studies (10 randomized controlled trials and 1 quasi-experimental trial) that fitted the inclusion criteria were identified. All the included studies had the functionality of self-monitoring of blood glucose. However, only some of them included functions for data analytics (7/11, 63.6%), education (6/11, 54.5%) and reminder (6/11, 54.5%). There were 5/11(45.5%) studies with significantly improved glycosylated hemoglobin in the intervention groups where educational functionality was present in the apps used in the 5 trials. Only 1 (1/11, 9.1%) study considered health behavioral theory and user involvement

  17. Conference on offshore wind power in France and Germany

    International Nuclear Information System (INIS)

    Meyer, Ronny; Furois, Timothee; Nolte, Nico; Lanoe, Frederic; Lehmann-Matthaei, Bjoern; Ifflaender, Andree; Courcambeck, Alexandre; Giese, Norbert; Kavafyan, Philippe; Bjaert, Niels; Wagner, Andreas; Guillet, Jerome

    2014-01-01

    The French-German office for Renewable energies (OFAEnR) organised a conference on offshore wind power in France and Germany. In the framework of this French-German exchange of experience, about 120 participants exchanged views on the planning and authorisation procedures implemented in both countries and on the installation, connection to the grid and maintenance of offshore wind turbines. environmental impacts and usage conflicts linked with offshore wind farms exploitation were addressed as well. This document brings together the available presentations (slides) made during this event: 1 - Update: Offshore Wind In Germany (Ronny Meyer); 2 - Offshore wind development in France (Timothee Furois); 3 - The Licensing Procedure for Offshore Wind Farms in the German EEZ (Nico Nolte); 4 - Spatial Planning and Permitting in France: What leverage for more efficiency? (Frederic Lanoe); 5 - Results of 10 years environmental research on FINO-platforms (Bjoern Lehmann-Matthaei); 6 - Offshore Grid Connection - Status Quo and Overview (Andree Ifflaender); 7 - Grid connection of Offshore Wind in France: Situation, perspectives and recommendations (Alexandre Courcambeck); 8 - Controlling risks and warranting safety: Best practices for the installation, exploitation and maintenance of offshore wind turbines (Norbert Giese); 9 - Offshore wind Bremerhaven experience: An essential asset for the development of a complete Wind Offshore industry in France (Philippe Kavafyan); 10 - Standardizing and Cost Reduction -Lessons Learned from London Array (Niels Bjaert); 11 - Offshore Wind energy in Germany: System Benefits and Cost Reduction Potentials. Presentation of study results from prognos/fichtner and Fraunhofer-IWeS (Andreas Wagner); 12 - Offshore Wind energy financing - opportunities and risks (Jerome Guillet)

  18. Spatial and temporal patterns of airflow across a foredune and beach surface under offshore winds: implications for aeolian sediment transport

    Science.gov (United States)

    Jackson, D.; Delgado-Fernandez, I.; Lynch, K.; Baas, A. C.; Cooper, J. A.; Beyers, M.

    2010-12-01

    The input of aeolian sediment into foredune systems from beaches represents a key component of sediment budget analysis along many soft sedimentary coastlines. Where there are significant offshore wind components in local wind regimes this is normally excluded from analysis. However, recent work has shown that if the topography of the foredune is favourable then this offshore component is steered or undergoes flow reversal through leeside eddying to give onshore transport events at the back beach under offshore flow conditions. At particular distances from the foredune crest flow reattaches to the surface to continue its incident offshore direction. The location of this reattachment point has important implications for aeolian transport of sand on the back beach and foredune toe locations. This study reports initial results where the positioning of the reattachment point is mobile and is driven by incident wind velocity (at the foredune crest) and the actual undulations of the foredune crest’s topography, dictating heterogeneous flow behaviour at the beach. Using detailed field measurements (25 Hz, three-dimensional sonic anemometry) and computational fluid dynamic modelling, a temporal and spatial pattern of reattachment positions are described. Implications for aeolian transport and dune evolution are also examined.

  19. Denmark - supplier of competitive offshore wind solutions. Megavind's strategy for offshore wind research, development and demonstration

    Energy Technology Data Exchange (ETDEWEB)

    2010-12-15

    In May 2006, the Danish Government presented a report on promoting environmentally effective technology and established a number of innovative partnerships. The partnerships intend to strengthen public-private cooperation between the state, industry, universities and venture capital to accelerate innovation for a number of green technologies. The partnership for wind energy is called Megavind. Megavind's strategy for offshore wind describes the offshore challenges and suggests research, development and demonstration (RD and D) priorities to enable offshore wind power become to competitive with other energy technologies. The strategy lists key recommendations as well as key thematic priorities and for each of these a number of RD and D priorities. Under each thematic priority references are made to the European Strategic Energy Technology plan (SET-plan), which prioritises offshore wind RD and D in Europe. (LN)

  20. SWARM-BOT: Pattern Formation in a Swarm of Self-Assembling Mobile Robots

    OpenAIRE

    El Kamel, A.; Mellouli, K.; Borne, P.; Sahin, E.; Labella, T.H.; Trianni, V.; Deneubourg, J.-L.; Rasse, P.; Floreano, D.; Gambardella, L.M.; Mondada, F.; Nolfi, S.; Dorigo, M.

    2002-01-01

    In this paper we introduce a new robotic system, called swarm-bot. The system consists of a swarm of mobile robots with the ability to connect to/disconnect from each other to self-assemble into different kinds of structures. First, we describe our vision and the goals of the project. Then we present preliminary results on the formation of patterns obtained from a grid-world simulation of the system.

  1. 75 FR 12148 - Airworthiness Directives; Ontic Engineering and Manufacturing, Inc. Propeller Governors, Part...

    Science.gov (United States)

    2010-03-15

    ... propeller pitch by regulating oil pressure to the propeller pitch change mechanism. Changes in governor oil..., the propeller governor cannot control oil pressure to the propeller pitch control mechanism. This... proposing this AD to prevent loss of propeller pitch control, damage to the propeller governor, and internal...

  2. The offshore benthic fish community

    Science.gov (United States)

    Lantry, Brian F.; Lantry, Jana R.; Weidel, Brian C.; Walsh, Maureen; Hoyle, James A.; Schaner, Teodore; Neave, Fraser B.; Keir, Michael

    2014-01-01

    Lake Ontario’s offshore benthic fish community includes primarily slimy sculpin, lake whitefish, rainbow smelt, lake trout, burbot, and sea lamprey. Of these, lake trout have been the focus of an international restoration effort for more than three decades (Elrod et al. 1995; Lantry and Lantry 2008). The deepwater sculpin and three species of deepwater ciscoes (Coregonus spp.) that were historically important in the offshore benthic zone became rare or were extirpated by the 1960s (Christie 1973; Owens et al. 2003; Lantry et al. 2007b; Roth et al. 2013). Ecosystem changes continue to influence the offshore benthic fish community, including the effects of dreissenid mussels, the near disappearance of burrowing amphipods (Diporeia spp.) (Dermott et al. 2005; Watkins et al. 2007), and the increased abundance and expanded geographic distribution of round goby (see Nearshore Fish Community chapter) (Lantry et al. 2007b). The fish-community objectives for the offshore benthic fish community, as described by Stewart et al. (1999), are:

  3. Chinese Cardiovascular Disease Mobile Apps' Information Types, Information Quality, and Interactive Functions for Self-Management: Systematic Review.

    Science.gov (United States)

    Xie, Bo; Su, Zhaohui; Zhang, Wenhui; Cai, Run

    2017-12-14

    China has a large population with cardiovascular disease (CVD) that requires extensive self-management. Mobile health (mHealth) apps may be a useful tool for CVD self-management. Little is currently known about the types and quality of health information provided in Chinese CVD mobile apps and whether app functions are conducive to promoting CVD self-management. We undertook a systematic review to evaluate the types and quality of health information provided in Chinese CVD mobile apps and interactive app functions for promoting CVD self-management. Mobile apps targeting end users in China with CVD conditions were selected in February 2017 through a multi-stage process. Three frameworks were used to evaluate the selected apps: (1) types of health information offered were assessed using our Health Information Wants framework, which encompasses 7 types of information; (2) quality of information provided in the apps was assessed using the 11 guidelines recommended by the National Library of Medicine of the National Institutes of Health; and (3) types of interactive app functions for CVD self-management were assessed using a 15-item framework adapted from the literature, including our own prior work. Of 578 apps identified, 82 were eligible for final review. Among these, information about self-care (67/82, 82%) and information specifically regarding CVD (63/82, 77%) were the most common types of information provided, while information about health care providers (22/82, 27%) and laboratory tests (5/82, 6%) were least common. The most common indicators of information quality were the revealing of apps' providers (82/82, 100%) and purpose (82/82, 100%), while the least common quality indicators were the revealing of how apps' information was selected (1/82, 1%) and app sponsorship (0/82, 0%). The most common interactive functions for CVD self-management were those that enabled user interaction with the app provider (57/82, 70%) and with health care providers (36/82, 44

  4. IFREMER-ADEME colloquium 'Offshore renewable energies: offshore wind energy - sea currents and waves. Collection of abstracts

    International Nuclear Information System (INIS)

    2004-10-01

    This document contains programme and abstracts of contributions presented during a colloquium. These contributions first addresses the context, and regulatory and economic aspects of offshore wind and sea energy: specificities related to the Public Maritime Domain for the implantation of offshore wind turbines, economy of sea energies within a perspective of de-carbonation of the world energy sector, case of offshore wind turbines and assessment of economic impacts of the implantation of sea renewable energy production units, financing stakes for offshore wind energy projects. A second set of contribution addresses the state-of -the-art and feedbacks for offshore wind energy installations. The third set addresses the assessment of resource potential, measurements, models and production prediction for offshore wind energy: case of French coasts, use of radar for remote sensing, wind climatology modelling, data acquisition for wind farm and data processing. The fourth set of contributions addresses the state-of-the-art, feedback, and R and D for sea current energy, while the fifth one addressed the same aspects for sea wave energy. Technology, installations, maintenance and storage in the field of wind energy are then addressed, and the last set deals with environmental and social-economical impacts of sea renewable energies

  5. The onshore influence of offshore fresh groundwater

    Science.gov (United States)

    Knight, Andrew C.; Werner, Adrian D.; Morgan, Leanne K.

    2018-06-01

    Freshwater contained within the submarine extensions of coastal aquifers is increasingly proposed as a freshwater source for coastal communities. However, the extent to which offshore freshwater supports onshore pumping is currently unknown on a global scale. This study provides the first attempt to examine the likely prevalence of situations where offshore freshwater influences onshore salinities, considering various sites from around the world. The groundwater conditions in twenty-seven confined and semi-confined coastal aquifers with plausible connections to inferred or observed offshore freshwater are explored. The investigation uses available onshore salinities and groundwater levels, and offshore salinity knowledge, in combination with analytical modelling, to develop simplified conceptual models of the study sites. Seven different conceptual models are proposed based on the freshwater-saltwater extent and insights gained from analytical modelling. We consider both present-day and pre-development conditions in assessing potential modern contributions to offshore fresh groundwater. Conceptual models also include interpretations of whether offshore freshwater is a significant factor influencing onshore salinities and well pumping sustainability. The results indicate that onshore water levels have declined between pre-development and present-day conditions in fourteen of the fifteen regions for which pre-development data are available. Estimates of the associated steady-state freshwater extents show the potential for considerable offshore fresh groundwater losses accompanying these declines. Both present-day and pre-development heads are insufficient to account for the observed offshore freshwater in all cases where adequate data exist. This suggests that paleo-freshwater and/or aquifer heterogeneities contribute significantly to offshore freshwater extent. Present-day heads indicate that active seawater intrusion (SWI) will eventually impact onshore pumping

  6. Prevalence and co-occurrence of compulsive buying, problematic Internet and mobile phone use in college students in Yantai, China: relevance of self-traits.

    Science.gov (United States)

    Jiang, Zhaocai; Shi, Mingyan

    2016-12-01

    Until now, most research in the prevalence of compulsive buying (CB) has been developed from samples in western developed countries, this study aimed to estimate the prevalence and co-morbidities of CB, problematic Internet use (PIU) and problematic mobile phone use (PMPU) in college students in Yantai, China. Moreover, based on the lack of research focusing on differences between CB and addiction, we will explore whether CB and PIU/PMPU individuals are characterized by the same self-traits (i. e., self-control, self-esteem and self-efficacy) related profile. A total of 601 college students were involved in this cross-sectional study. Compulsive buying, problematic Internet and mobile phone use and self-traits were assessed by self-reported questionnaires. The demographic information and use characteristics were included in the questionnaires. The incidence of CB, PIU and PMPU were 5.99, 27.8 and 8.99% respectively. In addition, compared with rural students, students from cities are more likely to get involved in CB. Students using mobile phone to surf the Internet displayed higher risk of PIU than counterparts using computer. Students using Internet or mobile phone longer are more prone to problematic use. Furthermore, we found the strong correlations and high co-morbidities of CB, PIU and PMPU and self-control was the most significant predictor for all three disorders. However, self-esteem and self-efficacy were significant predictors only for CB. Our findings indicated that with the prevalence of CB and PMPU roughly equivalent to that demonstrated in previous studies, PIU in Chinese college students is serious and deserves more attention. Furthermore, besides the impulsive aspect common with addiction, CB is also driven by painful self-awareness derived from low self-regard which implies the obsessive-compulsive aspect.

  7. Prevalence and co-occurrence of compulsive buying, problematic Internet and mobile phone use in college students in Yantai, China: relevance of self-traits

    Directory of Open Access Journals (Sweden)

    Zhaocai Jiang

    2016-12-01

    Full Text Available Abstract Background Until now, most research in the prevalence of compulsive buying (CB has been developed from samples in western developed countries, this study aimed to estimate the prevalence and co-morbidities of CB, problematic Internet use (PIU and problematic mobile phone use (PMPU in college students in Yantai, China. Moreover, based on the lack of research focusing on differences between CB and addiction, we will explore whether CB and PIU/PMPU individuals are characterized by the same self-traits (i. e., self-control, self-esteem and self-efficacy related profile. Methods A total of 601 college students were involved in this cross-sectional study. Compulsive buying, problematic Internet and mobile phone use and self-traits were assessed by self-reported questionnaires. The demographic information and use characteristics were included in the questionnaires. Results The incidence of CB, PIU and PMPU were 5.99, 27.8 and 8.99% respectively. In addition, compared with rural students, students from cities are more likely to get involved in CB. Students using mobile phone to surf the Internet displayed higher risk of PIU than counterparts using computer. Students using Internet or mobile phone longer are more prone to problematic use. Furthermore, we found the strong correlations and high co-morbidities of CB, PIU and PMPU and self-control was the most significant predictor for all three disorders. However, self-esteem and self-efficacy were significant predictors only for CB. Conclusions Our findings indicated that with the prevalence of CB and PMPU roughly equivalent to that demonstrated in previous studies, PIU in Chinese college students is serious and deserves more attention. Furthermore, besides the impulsive aspect common with addiction, CB is also driven by painful self-awareness derived from low self-regard which implies the obsessive-compulsive aspect.

  8. An Integrated Assessment Framework of Offshore Wind Power Projects Applying Equator Principles and Social Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Yu-Che Tseng

    2017-10-01

    Full Text Available This paper reviews offshore wind power project finance and provides an integrated assessment that employs Equator Principles, life cycle assessment, risk assessment, materiality analysis, credit assessment, and ISAE 3000 assurance. We have not seen any comprehensive review papers or book chapters that covers the entire offshore wind power project finance process. We also conducted an SWancor Formosa Phase 1 case study to illustrate the application of integrated assessment to better assist policymakers, wind farm developers, practitioners, potential investors and observers, and stakeholders in their decisions. We believe that this paper can form part of the effort to reduce information asymmetry and the transaction costs of wind power project finance, as well as mobilize green finance investments from the financial sector to renewable energy projects to achieve a national renewable energy policy.

  9. Understanding public responses to offshore wind power

    International Nuclear Information System (INIS)

    Haggett, Claire

    2011-01-01

    This paper is about understanding the role and importance of public responses to offshore wind power. It builds on a framework for understanding social acceptance and opposition to onshore turbines, and reviews the emerging research on offshore wind. While less is known about how people will respond to offshore than onshore wind, there is now an emerging body of research. From this literature, several common factors which influence responses have emerged and are discussed here: the (continued) role of visual impact; place attachment to the local area; lack of tangible benefits; relationships with developers and outsiders; and the role of the planning and decision-making systems. The paper argues that, as with onshore developments, the public should be included in decision-making about offshore wind farms, and that they have a key role which should not be underestimated. The paper concludes with some thoughts about the means to involve people and how effected communities might be effectively acknowledged, identified and engaged. - Research Highlights: →Comprehensive review of public responses to offshore wind literature. →Applies key lessons and analytic insights from onshore wind to offshore wind. →Emphasizes the role and importance of the public in the planning and implementation of offshore wind energy.

  10. MEMS-Based Solid Propellant Rocket Array Thruster

    Science.gov (United States)

    Tanaka, Shuji; Hosokawa, Ryuichiro; Tokudome, Shin-Ichiro; Hori, Keiichi; Saito, Hirobumi; Watanabe, Masashi; Esashi, Masayoshi

    The prototype of a solid propellant rocket array thruster for simple attitude control of a 10 kg class micro-spacecraft was completed and tested. The prototype has 10×10 φ0.8 mm solid propellant micro-rockets arrayed at a pitch of 1.2 mm on a 20×22 mm substrate. To realize such a dense array of micro-rockets, each ignition heater is powered from the backside of the thruster through an electrical feedthrough which passes along a propellant cylinder wall. Boron/potassium nitrate propellant (NAB) is used with/without lead rhodanide/potassium chlorate/nitrocellulose ignition aid (RK). Impulse thrust was measured by a pendulum method in air. Ignition required electric power of at least 3 4 W with RK and 4 6 W without RK. Measured impulse thrusts were from 2×10-5 Ns to 3×10-4 Ns after the calculation of compensation for air dumping.

  11. Nuclear thermal rockets using indigenous Martian propellants

    International Nuclear Information System (INIS)

    Zubrin, R.M.

    1989-01-01

    This paper considers a novel concept for a Martian descent and ascent vehicle, called NIMF (for nuclear rocket using indigenous Martian fuel), the propulsion for which will be provided by a nuclear thermal reactor which will heat an indigenous Martian propellant gas to form a high-thrust rocket exhaust. The performance of each of the candidate Martian propellants, which include CO2, H2O, CH4, N2, CO, and Ar, is assessed, and the methods of propellant acquisition are examined. Attention is also given to the issues of chemical compatibility between candidate propellants and reactor fuel and cladding materials, and the potential of winged Mars supersonic aircraft driven by this type of engine. It is shown that, by utilizing the nuclear landing craft in combination with a hydrogen-fueled nuclear thermal interplanetary vehicle and a heavy lift booster, it is possible to achieve a manned Mars mission in one launch. 6 refs

  12. Global Production: The Case of Offshore Programming

    DEFF Research Database (Denmark)

    Nørbjerg, Jacob; Havn, Erling; Bansler, Jørgen P.

    1997-01-01

    of software is no exception.In this paper, we present a newly started research project on offshore program-ming, that is the practice of sending software development “offshore,” to India or other low wage areas. The project focuses on the organisation of offshore program-ming and, particularly, on the role...

  13. Socio-economic Impacts—Offshore Activities/Energy

    DEFF Research Database (Denmark)

    Halsnæs, Kirsten; Drews, Martin; Clausen, Niels-Erik

    2016-01-01

    sector and renewable electricity generation—mainly from offshore wind—is increasing. Energy and offshore activities in the North Sea are critically vulnerable to climate change along the full supply chain. The major vulnerabilities for offshore installations like rigs, offshore wind energy and pipelines......, it is highly uncertain how much the future potential of other renewable energy sources such as wind, solar, terrestrial biomass, or emerging technologies like wave, tidal or marine biomass could be positively or negatively affected. Due to the different national energy supply mixes the vulnerability to climate......-related impacts will vary among North Sea countries. To ensure safe and reliable future operations comprehensive and systematic risk assessments are therefore needed which account for, for example, the high integration of power systems in the region....

  14. Stable carbon isotope cycling in mobile coastal muds of Amapá, Brazil

    Science.gov (United States)

    Zhu, Zhongbin; Aller, Robert C.; Mak, John

    2002-10-01

    Approximately 10% of the sediment delivered by the Amazon River moves northwest along the coast of Amapá, Brazil, initiating the Guianas mobile mud belt. Amapá coastal muds generally have a two-layer transport structure and are characterized by highly non-steady-state sedimentation. Isotopic compositions of pore water ∑CO 2 and solid phase C org demonstrate that remineralization in the surficial mobile zone (˜0.3-1 m thick) is dominated by terrestrial sources at sites in proximity to the mangrove fringe (˜1-2 m water depth), and marine (plus possible carbonate dissolution) sources further offshore (˜21 km, ˜7 m depth). The net δ13C of ∑CO 2 produced and C org remineralized is ˜-26‰ and -25.9‰, respectively inshore, and ˜-14‰ and -18.6‰, respectively offshore (compared to average terrestrial and marine C org end members of -28‰ and -20‰). Efficient remineralization in the suboxic mobile zone lowers particle surface loading of C org from ˜0.35 mg C m -2 in the Amazon delta topset to ˜0.13-0.16 along Amapá. Sequential, temperature-dependent extractions were used to operationally fractionate inorganic C pools. Authigenic carbonates, mostly siderite and mixed Ca, Mg, Fe, Mn-carbonates, dominate sediment inorganic C (˜50-200 μmol g -1). The mass weighted δ13C of carbonates, ˜-15‰ to -19‰, is relatively restricted in range compared to pore water ∑CO 2, implying most precipitation in the reactive mobile surface sediments. Periodic mixing with bottom seawater and/or dissolution of biogenic carbonates in the surficial layer shift δ13C values of pore water to heavier values than C org reactant sources. At one offshore site (˜7 m), about 22% of pore water ∑CO 2 has undergone reduction during methanogenesis below the mobile surface zone, extracting ∑CO 2 with δ13C˜-90‰ and leaving a residual δ13C˜-0.37‰. Diagenetic processes in the suboxic mobile mud zone dominate C remineralization and storage along the coast of Amapá.

  15. Lesson Learned from Collecting Quantified Self Information via Mobile and Wearable Devices

    Directory of Open Access Journals (Sweden)

    Reza Rawassizadeh

    2015-11-01

    Full Text Available The ubiquity and affordability of mobile and wearable devices has enabled us to continually and digitally record our daily life activities. Consequently, we are seeing the growth of data collection experiments in several scientific disciplines. Although these have yielded promising results, mobile and wearable data collection experiments are often restricted to a specific configuration that has been designed for a unique study goal. These approaches do not address all the real-world challenges of “continuous data collection” systems. As a result, there have been few discussions or reports about such issues that are faced when “implementing these platforms” in a practical situation. To address this, we have summarized our technical and user-centric findings from three lifelogging and Quantified Self data collection studies, which we have conducted in real-world settings, for both smartphones and smartwatches. In addition to (i privacy and (ii battery related issues; based on our findings we recommend further works to consider (iii implementing multivariate reflection of the data; (iv resolving the uncertainty and data loss; and (v consider to minimize the manual intervention required by users. These findings have provided insights that can be used as a guideline for further Quantified Self or lifelogging studies.

  16. Operational management of offshore energy assets

    Science.gov (United States)

    Kolios, A. J.; Martinez Luengo, M.

    2016-02-01

    Energy assets and especially those deployed offshore are subject to a variety of harsh operational and environmental conditions which lead to deterioration of their performance and structural capacity over time. The aim of reduction of CAPEX in new installations shifts focus to operational management to monitor and assess performance of critical assets ensuring their fitness for service throughout their service life and also to provide appropriate and effective information towards requalification or other end of life scenarios, optimizing the OPEX. Over the last decades, the offshore oil & gas industry has developed and applied various approaches in operational management of assets through Structural Health and Condition Monitoring (SHM/CM) systems which can be, at a certain level, transferable to offshore renewable installations. This paper aims to highlight the key differences between offshore oil & gas and renewable energy assets from a structural integrity and reliability perspective, provide a comprehensive overview of different approaches that are available and applicable, and distinguish the benefits of such systems in the efficient operation of offshore energy assets.

  17. Fine Slicing of the Value Chain and Offshoring of Essential Activities

    DEFF Research Database (Denmark)

    Linares-Navarro, Esmeralda; Pedersen, Torben; Pla-Barber, José

    2014-01-01

    The offshoring of more advanced activities is increasing and a debate about the limits of offshoring has emerged. Companies are fine-slicing their value chains, and moving beyond the offshoring of peripheral and non-core activities to the offshoring of advanced and essential activities that are c......The offshoring of more advanced activities is increasing and a debate about the limits of offshoring has emerged. Companies are fine-slicing their value chains, and moving beyond the offshoring of peripheral and non-core activities to the offshoring of advanced and essential activities...... that companies are redefining their core activities and in this process, some essential activities previously viewed as core activities are being detached from the core, and they become more offshorable. The study uses a sample of 565 offshoring operations conducted by 263 multinational companies from 15...... European countries. A logistic regression was used to analyze the relationship between the activities offshored (non-core versus essential activities) and the offshoring mode implemented (captive offshoring versus offshore outsourcing). We find that essential activities are typically offshored using...

  18. Image based measurement techniques for aircraft propeller flow diagnostics : Propeller slipstream investigations at high-lift conditions and thrust reverse

    NARCIS (Netherlands)

    Roosenboom, E.W.M.

    2011-01-01

    The aim of the thesis is to measure the propeller slipstream properties (velocity and vorticity) and to assess the unsteady and instantaneous behavior of the propeller flow field at high disk loadings, zero thrust and thrust reverse using the image based measurement techniques. Along with its

  19. Simulation of self-propelled chemotactic bacteria in a stokes flow*

    Directory of Open Access Journals (Sweden)

    Maury B.

    2010-12-01

    Full Text Available We prescrit a method to simulate the motion of self-propelled rigid particles in a twodimensional Stokesian fluid, taking into account chemotactic behaviour. Self-propulsion is modelled as a point force associated to each particle, placed at a certain distance from its gravity centre. The method for solving the fluid flow and the motion of the bacteria is based on a variational formulation on the whole domain, including fluid and particles: rigid motion is enforced by penalizing the strain rate tensor on the rigid domain, while incompressibility is treated by duality. This leads to a minimisation problem over unconstrained functional spaces which cari lie easily implemented from any finite element Stokes solver. In order to ensure robustness, a projection algorithm is used to deal with contacts between particles. The particles are meant to represent bacteria of the Escherichia coli type, which interact with their chemical environment through consumption of nutrients and orientation in some favorable direction. Our mode’ takes into account the interaction with oxygen. An advection-diffusion equation on the oxygen concentration is solved in the fluid domain, with a source term accounting for oxygen consumption by the bacteria. In addition, self-propulsion is deactivated for those particles which cannot consume enough oxygen. Finally, the mode’ includes random changes in the orientation of the individual bacteria, with a frequency that depends on the surrounding oxygen concentration, in order to favor the direction of the concentration gradient and thus to reproduce chemotactic behaviour. Numerical simulations implemented with FreeFem++ are presented. Nous présentons une méthode de simulation du mouvement de particules rigides autopropulsées dans un fluide de Stokes en dimension 2. en prenant en compte leur comportement chimiotactique. L’auto-propulsion est modélisée par une force (presque ponctuelle associée à chaque particule et plac

  20. Pricing offshore wind power

    International Nuclear Information System (INIS)

    Levitt, Andrew C.; Kempton, Willett; Smith, Aaron P.; Musial, Walt; Firestone, Jeremy

    2011-01-01

    Offshore wind offers a very large clean power resource, but electricity from the first US offshore wind contracts is costlier than current regional wholesale electricity prices. To better understand the factors that drive these costs, we develop a pro-forma cash flow model to calculate two results: the levelized cost of energy, and the breakeven price required for financial viability. We then determine input values based on our analysis of capital markets and of 35 operating and planned projects in Europe, China, and the United States. The model is run for a range of inputs appropriate to US policies, electricity markets, and capital markets to assess how changes in policy incentives, project inputs, and financial structure affect the breakeven price of offshore wind power. The model and documentation are made publicly available. - Highlights: → We calculate the Breakeven Price (BP) required to deploy offshore wind plants. → We determine values for cost drivers and review incentives structures in the US. → We develop 3 scenarios using today's technology but varying in industry experience. → BP differs widely by Cost Scenario; relative policy effectiveness varies by stage. → The low-range BP is below regional market values in the Northeast United States.

  1. Offshore Supply Industry Dynamics

    DEFF Research Database (Denmark)

    Roslyng Olesen, Thomas

    This report is part of the research project “The competitive challenges and strategic development possibilities for The Blue Denmark”, which was launched in 2014. The project is funded by the Danish Maritime Fund and carried out by researchers at CBS Maritime which is a Business in Society Platform...... with companies in the maritime sector. This report “Offshore Supply Industry Dynamics – Business strategies in the offshore supply industry” is the second report in mapping project D. It examines the markets and business strategies of various suppliers and furthermore presents an analysis of the challenges...... at Copenhagen Business School with a focus on value creation in the maritime industries. The project embraces various maritime segments from shipping and offshore to ports and suppliers. The research questions for the individual projects have been formulated by researchers at CBS Maritime in cooperation...

  2. Association of self-reported cognitive concerns with mobility in people with lower limb loss.

    Science.gov (United States)

    Kelly, Valerie E; Morgan, Sara J; Amtmann, Dagmar; Salem, Rana; Hafner, Brian J

    2018-01-01

    This study tested the hypothesis that greater perceived cognitive concerns are associated with worse mobility in a cohort of prosthesis users with lower limb loss (LLL). We performed a secondary analysis of cross-sectional self-report data from a volunteer sample of people with LLL due to dysvascular and non-dysvacular causes. Perceived cognitive difficulties were assessed using the Quality of Life in Neurological Disorders Applied Cognition - General Concerns (Neuro-QoL ACGC). Mobility was measured with the Activities-Specific Balance Confidence Scale (ABC) and the Prosthetic Limb Users Survey of Mobility (PLUS-M). Simple linear regressions examined univariate relationships between cognitive concerns and mobility. Multiple linear regression analyses included demographic and amputation-related variables that could influence this relationship. Analysis of data from 1291 people with LLL demonstrated that greater cognitive concerns, measured by the Neuro-QoL ACGC, were associated with poorer perceived mobility, measured by both ABC and PLUS-M instruments. This relationship remained statistically significant after adjusting for demographic and amputation-related factors. These results suggest that greater cognitive concerns are associated with worse mobility among a broad range of people with LLL. An improved understanding of this relationship is critical for optimizing rehabilitation outcomes for this population. Implications for rehabilitation Rehabilitation for people with lower limb loss (LLL) typically focuses on physical impairments and mobility limitations, but cognition is increasingly recognized to have an impact on functional outcomes. Greater perceived cognitive concerns are associated with poorer mobility among a broad range of people with LLL, even when adjusting for demographic and amputation-related factors. Cognitive status can impact relevant rehabilitative outcomes, including mobility, and should be considered when planning prosthetic and therapeutic

  3. On the mobility of delocalized and self-trapped positronium states in ionic crystals

    CERN Document Server

    Bondarev, I V

    2003-01-01

    The temperature dependence of the diffusivity is studied for delocalized and self-trapped positronium (Ps) atoms in ionic crystals. Detailed calculations taking into account low-temperature and inelastic scattering corrections and a Ps scattering form-factor have been performed for delocalized Ps. Low-temperature and inelastic corrections to the delocalized Ps diffusivity are shown to be essential below several tens of K, while the form-factor contribution is negligibly small up to thousand K. The mobility of self-trapped Ps is analyzed within the framework of a small polaron approach. The hopping contribution to the self-trapped Ps diffusivity is shown to be adiabatic in its physical nature. The tunnel contribution is in general not small and may turn out to be dominating even at very high temperatures. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  4. Offshore rectenna feasbility

    Science.gov (United States)

    Freeman, J. W.; Hervey, D.; Glaser, P.

    1980-01-01

    A preliminary study of the feasibility and cost of an offshore rectenna to serve the upper metropolitan east coast was performed. A candidate site at which to build a 5 GW rectenna was selected on the basis of proximity to load centers, avoidance of shipping lanes, sea floor terrain, and relocated conditions. Several types of support structures were selected for study based initially on the reference system rectenna concept of a wire mesh ground screen and dipoles each with its own rectifier and filter circuits. Possible secondary uses of an offshore rectenna were examined and are evaluated.

  5. Offshore Energy Knowledge Exchange Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-12

    A report detailing the presentations and topics discussed at the Offshore Energy Knowledge Exchange Workshop, an event designed to bring together offshore energy industry representatives to share information, best practices, and lessons learned.

  6. Self-reported dependence on mobile phones in young adults: A European cross-cultural empirical survey

    Science.gov (United States)

    Lopez-Fernandez, Olatz; Kuss, Daria J.; Romo, Lucia; Morvan, Yannick; Kern, Laurence; Graziani, Pierluigi; Rousseau, Amélie; Rumpf, Hans-Jürgen; Bischof, Anja; Gässler, Ann-Kathrin; Schimmenti, Adriano; Passanisi, Alessia; Männikkö, Niko; Kääriänen, Maria; Demetrovics, Zsolt; Király, Orsolya; Chóliz, Mariano; Zacarés, Juan José; Serra, Emilia; Griffiths, Mark D.; Pontes, Halley M.; Lelonek-Kuleta, Bernadeta; Chwaszcz, Joanna; Zullino, Daniele; Rochat, Lucien; Achab, Sophia; Billieux, Joël

    2017-01-01

    Background and aims Despite many positive benefits, mobile phone use can be associated with harmful and detrimental behaviors. The aim of this study was twofold: to examine (a) cross-cultural patterns of perceived dependence on mobile phones in ten European countries, first, grouped in four different regions (North: Finland and UK; South: Spain and Italy; East: Hungary and Poland; West: France, Belgium, Germany, and Switzerland), and second by country, and (b) how socio-demographics, geographic differences, mobile phone usage patterns, and associated activities predicted this perceived dependence. Methods A sample of 2,775 young adults (aged 18–29 years) were recruited in different European Universities who participated in an online survey. Measures included socio-demographic variables, patterns of mobile phone use, and the dependence subscale of a short version of the Problematic Mobile Phone Use Questionnaire (PMPUQ; Billieux, Van der Linden, & Rochat, 2008). Results The young adults from the Northern and Southern regions reported the heaviest use of mobile phones, whereas perceived dependence was less prevalent in the Eastern region. However, the proportion of highly dependent mobile phone users was more elevated in Belgium, UK, and France. Regression analysis identified several risk factors for increased scores on the PMPUQ dependence subscale, namely using mobile phones daily, being female, engaging in social networking, playing video games, shopping and viewing TV shows through the Internet, chatting and messaging, and using mobile phones for downloading-related activities. Discussion and conclusions Self-reported dependence on mobile phone use is influenced by frequency and specific application usage. PMID:28425777

  7. Self-reported dependence on mobile phones in young adults: A European cross-cultural empirical survey.

    Science.gov (United States)

    Lopez-Fernandez, Olatz; Kuss, Daria J; Romo, Lucia; Morvan, Yannick; Kern, Laurence; Graziani, Pierluigi; Rousseau, Amélie; Rumpf, Hans-Jürgen; Bischof, Anja; Gässler, Ann-Kathrin; Schimmenti, Adriano; Passanisi, Alessia; Männikkö, Niko; Kääriänen, Maria; Demetrovics, Zsolt; Király, Orsolya; Chóliz, Mariano; Zacarés, Juan José; Serra, Emilia; Griffiths, Mark D; Pontes, Halley M; Lelonek-Kuleta, Bernadeta; Chwaszcz, Joanna; Zullino, Daniele; Rochat, Lucien; Achab, Sophia; Billieux, Joël

    2017-06-01

    Background and aims Despite many positive benefits, mobile phone use can be associated with harmful and detrimental behaviors. The aim of this study was twofold: to examine (a) cross-cultural patterns of perceived dependence on mobile phones in ten European countries, first, grouped in four different regions (North: Finland and UK; South: Spain and Italy; East: Hungary and Poland; West: France, Belgium, Germany, and Switzerland), and second by country, and (b) how socio-demographics, geographic differences, mobile phone usage patterns, and associated activities predicted this perceived dependence. Methods A sample of 2,775 young adults (aged 18-29 years) were recruited in different European Universities who participated in an online survey. Measures included socio-demographic variables, patterns of mobile phone use, and the dependence subscale of a short version of the Problematic Mobile Phone Use Questionnaire (PMPUQ; Billieux, Van der Linden, & Rochat, 2008). Results The young adults from the Northern and Southern regions reported the heaviest use of mobile phones, whereas perceived dependence was less prevalent in the Eastern region. However, the proportion of highly dependent mobile phone users was more elevated in Belgium, UK, and France. Regression analysis identified several risk factors for increased scores on the PMPUQ dependence subscale, namely using mobile phones daily, being female, engaging in social networking, playing video games, shopping and viewing TV shows through the Internet, chatting and messaging, and using mobile phones for downloading-related activities. Discussion and conclusions Self-reported dependence on mobile phone use is influenced by frequency and specific application usage.

  8. Emergent structures and dynamics in suspensions of self-phoretic colloids

    Science.gov (United States)

    Scagliarini, Andrea; Pagonabarraga, Ignacio

    2013-11-01

    Active fluids, such as suspensions of self-propelled particles , are a fascinating example of Soft Matter displaying complex collective behaviours which provide challenges in non-equilibrium Statistical Physics. The recent development of techniques to assemble miniaturized devices has led to a growing interest for micro and nanoscale engines that can perform autonomous motion (``microrobots''), as, for instance, self-phoretic colloids, for which the propulsion is induced by the generation of a chemical species in a reaction catalyzed at the particle surface. We perform a mesoscopic numerical study of suspensions of self-phoretic colloids. We show that, at changing the sign of the phoretic mobility (which accounts for the colloid-solute interactions), the system switches from a cluster phase to a state with slowed dynamics. We find that the cluster size distribution follows an exponential behaviour, with a characteristic size growing linearly with the colloid activity, while the density fluctuations grow as a power-law with an exponent depending on the cluster fractal dimension.We single out hydrodynamic interactions, showing that their effect is to work against cluster formation. For positive μ, we observe that colloids tend to reach an ordered state on a triangular lattice.

  9. Attitude and acceptance of offshore wind farms

    DEFF Research Database (Denmark)

    Ladenburg, Jacob; Möller, B.

    2011-01-01

    farms attributes on attitude towards offshore wind farms. The results point towards that the travel time and the attributes of the nearest offshore wind farm influence the attitude significantly. Travel time has mixed effects on the attitude, whilst offshore wind farms with many turbines generate more...... a novel contribution to this field. First of all, we give a thorough review of the studies that have analysed the relation between experience with wind turbines and attitude. In addition, we supplement the review by analysing the effect of travel distance to the nearest offshore wind farm and the wind...

  10. Performance Analysis Rim Driven Propeller as a Propulsor using Open Water Test

    OpenAIRE

    Agoes Santoso; Irfan Syarif Arief; Anggara Tio Kurniawan

    2017-01-01

    The use of duct in propeller is one of the breakthrough in the development of the propeller. Ducting not only claimed to be increasing efficiency of the propeller, but also capable to protect the propeller from impact therefore propeller lifespan is longer. From that idea then RDP is created. RDP propeller blade are designed to be fix at their housing called Rim, in the other word, the driving force came from it’s rim. On current RDP blade used is non-conventional blade. This thesis will disc...

  11. The Capabilities of the Offshore Middlemen

    DEFF Research Database (Denmark)

    Mahnke, Volker; Wareham, Jonathan

    preliminary theoretical justification for the emergence of offshore intermediaries; describe how and why they develop intermediation capabilities; and offer initial evidence substantiating their function and processes in intermediating transnational offshoring relationships in software development...

  12. Non-destructive testing of rocket propellant quality using -X-ray radiography

    International Nuclear Information System (INIS)

    Arayaprecha, W.

    1979-01-01

    Currently, X-rays radiography has been used extensively in various industries. In this thesis, X-rays has been used in the study of compaction of rocket propellant. For a rocket, to gain an accurate guidance result, the propellant used must be mixed and compacted thoroughly. The quality control of the production of propellant sticks must be carefully done. In this study of non-destructive quality testing of rocket propellant, at first the ultrasonic rays was used to test its homogeneity. However, because the density of the propellant was too low, the test equipment could not detect any reflected signals from the propellant being tested. Then the new procedure using X-rays radiography was tried. The variables in the test procedure were voltage, amperage and the focal-film distance. Also different types of films were used. The results of this experiment were then used to construct an exposure chart for testing the homogeneity of the rocket propellant. The advantage of this chart is that a tester can use this table with propellant sticks of different sizes if they have similar density to the density specified in the chart. Also, it is not necessary that the mixture of the testing propellant be the same as the ones used to construct this chart

  13. Environmental risk in the offshore industry

    International Nuclear Information System (INIS)

    Woods, I.T.; Shirley, D.; Bottelberghs, P.H.

    1991-01-01

    The subject of oil pollution of the sea by the offshore industry is topical as a result of recent incidents both in the U.K. and overseas. While these incidents have primarily involved crude carriers, it has led to pressure to quantify the risk to the environment from the offshore industry in general. In this paper a method for the assessment of the frequency and size of oil spills from offshore installations is presented. It relies on previously reported spills to determine spill size/frequency information for a range of offshore activities, such as transport by pipeline, drilling and processing. Modification factors are used so local conditions, such as the number of wells drilled, throughput and well depth, can be considered in the assessment of the oil spill risk from a particular installation

  14. A Simple Method for High-Lift Propeller Conceptual Design

    Science.gov (United States)

    Patterson, Michael; Borer, Nick; German, Brian

    2016-01-01

    In this paper, we present a simple method for designing propellers that are placed upstream of the leading edge of a wing in order to augment lift. Because the primary purpose of these "high-lift propellers" is to increase lift rather than produce thrust, these props are best viewed as a form of high-lift device; consequently, they should be designed differently than traditional propellers. We present a theory that describes how these props can be designed to provide a relatively uniform axial velocity increase, which is hypothesized to be advantageous for lift augmentation based on a literature survey. Computational modeling indicates that such propellers can generate the same average induced axial velocity while consuming less power and producing less thrust than conventional propeller designs. For an example problem based on specifications for NASA's Scalable Convergent Electric Propulsion Technology and Operations Research (SCEPTOR) flight demonstrator, a propeller designed with the new method requires approximately 15% less power and produces approximately 11% less thrust than one designed for minimum induced loss. Higher-order modeling and/or wind tunnel testing are needed to verify the predicted performance.

  15. mobile Digital Access to a Web-enhanced Network (mDAWN): Assessing the Feasibility of Mobile Health Tools for Self-Management of Type-2 Diabetes.

    Science.gov (United States)

    Ho, Kendall; Newton, Lana; Boothe, Allison; Novak-Lauscher, Helen

    2015-01-01

    The mobile Digital Access to a Web-enhanced Network (mDAWN) program was implemented as an online, mobile self-management system to support patients with type-2 diabetes and their informal caregivers. Patients used wireless physiological sensors, received text messages, and had access to a secure web platform with health resources and semi-facilitated discussion forum. Outcomes were evaluated using (1) pre and post self-reported health behavior measures, (2) physiological outcomes, (3) program cost, and (4) in-depth participant interviews. The group had significantly decreased health distress, HbA1c levels, and systolic blood pressure. Participants largely saw the mDAWN as providing good value for the costs involved and found the program to be empowering in gaining control over their diabetes. mHealth programs have the potential to improve clinical outcomes through cost effective patient-led care for chronic illness. Further evaluation needs to examine integration of similar mHealth programs into the patient-physician relationship.

  16. Mobile applications for chronic disease self-management : building a bridge for behavior change

    Directory of Open Access Journals (Sweden)

    Aija Lähdesmäki

    2015-10-01

    Full Text Available Background One of the biggest challenges in the future of healthcare is the rising prevalence of chronic, non-communicable diseases. In high-income countries seven out of ten leading risk factors of death are caused by the way people eat, drink or move. Health behavior patterns are considered to account for 40 % of early mortality. If nothing changes, from 2011 until 2030 the cost of chronic disease in the whole world may reach 47 trillion dollars. It is clear that chronic disease care needs to change. Today people with chronic disease spend less than 0,1 % of their time yearly in direct contact with healthcare and guidance. The rest of the time they are under the influence of family, colleagues, acquaintances, media and all the conflicting information from them. Digital elements are emerging in healthcare. Some of these digital elements emerging are mobile applications. Of all the people in Finland, 70 % own a smartphone. These devices are often in the proximity of their owner; in a pocket or a purse, making them easy and fast to use for various purposes. This is why they can also prove to be useful tools for personal healthcare and chronic disease self-management support, for example for recording diet and exercise related values as well as various disease specific values like blood glucose or blood pressure measurements. They also enable two-way interaction with healthcare professionals and patients in their everyday life. This requires well designed applications that affect the patient’s health behavior and are tempting to use. According to research, this is not always the case. Aim The aim of this thesis study was to find out how multipurpose mobile applications intended for chronic disease self-management implement known behavior change techniques in order to change behavior, and to find out how they utilize known gamification features in order to maintain the change. The purpose of this study was to create a new, multidisciplinary

  17. Self-propelled in-tube shuttle and control system for automated measurements of magnetic field alignment

    International Nuclear Information System (INIS)

    Boroski, W.N.; Nicol, T.H.; Pidcoe, S.V.

    1990-03-01

    A magnetic field alignment gauge is used to measure the field angle as a function of axial position in each of the magnets for the Superconducting Super Collider (SSC). Present measurements are made by manually pushing the through the magnet bore tube and stopping at intervals to record field measurements. Gauge location is controlled through graduation marks and alignment pins on the push rods. Field measurements are recorded on a logging multimeter with tape output. Described is a computerized control system being developed to replace the manual procedure for field alignment measurements. The automated system employs a pneumatic walking device to move the measurement gauge through the bore tube. Movement of the device, called the Self-Propelled In-Tube Shuttle (SPITS), is accomplished through an integral, gas driven, double-acting cylinder. The motion of the SPITS is transferred to the bore tube by means of a pair of controlled, retractable support feet. Control of the SPITS is accomplished through an RS-422 interface from an IBM-compatible computer to a series of solenoid-actuated air valves. Direction of SPITS travel is determined by the air-valve sequence, and is managed through the control software. Precise axial position of the gauge within the magnet is returned to the control system through an optically-encoded digital position transducer attached to the shuttle. Discussed is the performance of the transport device and control system during preliminary testing of the first prototype shuttle. 1 ref., 7 figs

  18. Fall-related self-efficacy, not balance and mobility performance, is related to accidental falls in chronic stroke survivors with low bone mineral density.

    Science.gov (United States)

    Pang, M Y C; Eng, J J

    2008-07-01

    Chronic stroke survivors with low hip bone density are particularly prone to fractures. This study shows that fear of falling is independently associated with falls in this population. Thus, fear of falling should not be overlooked in the prevention of fragility fractures in these patients. Chronic stroke survivors with low bone mineral density (BMD) are particularly prone to fragility fractures. The purpose of this study was to identify the determinants of balance, mobility and falls in this sub-group of stroke patients. Thirty-nine chronic stroke survivors with low hip BMD (T-score fall-related self-efficacy. Any falls in the past 12 months were also recorded. Multiple regression analysis was used to identify the determinants of balance and mobility performance, whereas logistic regression was used to identify the determinants of falls. Multiple regression analysis revealed that after adjusting for basic demographics, fall-related self-efficacy remained independently associated with balance/mobility performance (R2 = 0.494, P fall-related self-efficacy, but not balance and mobility performance, was a significant determinant of falls (odds ratio: 0.18, P = 0.04). Fall-related self-efficacy, but not mobility and balance performance, was the most important determinant of accidental falls. This psychological factor should not be overlooked in the prevention of fragility fractures among chronic stroke survivors with low hip BMD.

  19. Computer aided design and development of mixed-propeller pumps

    International Nuclear Information System (INIS)

    Bhaoyal, B.C.

    1994-01-01

    This paper deals with the design principle of mixed propeller hydraulic aided by CADD software developed by author for generation of the hydraulic profile of the mixed propeller and diffuser geometry. The design methodology for plotting the vane profile of mixed propeller pump has been discussed in detail with special reference to conformal transformation in cylindrical as well as conical plane. (author). 10 refs., 11 figs

  20. Enhanced propellant performance via environmentally friendly curable surface coating

    Directory of Open Access Journals (Sweden)

    Thelma Manning

    2017-06-01

    Full Text Available Surface coating of granular propellants is widely used in a multiplicity of propellants for small, medium and large caliber ammunition. All small caliber ball propellants exhibit burning progressivity due to application of effective deterrent coatings. Large perforated propellant grains have also begun utilizing plasticizing and impregnated deterrent coatings with the purpose of increasing charge weights for greater energy and velocity for the projectile. The deterrent coating and impregnation process utilizes volatile organic compounds (VOCs and hazardous air pollutants (HAPs which results in propellants that need to be forced air dried which impacts air quality. Propellants undergo temperature fluctuations during their life. Diffusion coefficients vary exponentially with variations in temperature. A small temperature increase can induce a faster migration, even over a short period of time, which can lead to large deviations in the concentration. This large concentration change in the ammunition becomes a safety or performance liability. The presence of both polymeric deterrents and nitroglycerin(NG in the nitrocellulose matrix and organic solvents leads to higher diffusion rates. This results in continued emissions of VOCs and HAPs. Conventional polymers tend to partition within the propellant matrix. In other words, localized mixing can occur between the polymer and underlying propellant. This is due to solvent induced softening of the polymer vehicle over the propellant grain. In effect this creates a path where migration can occur. Since nitrate esters, like NG, are relatively small, it can exude to the surface and create a highly unstable and dangerous situation for the warfighter. Curable polymers do not suffer from this partitioning due to “melting” because no VOC solvents are present. They remain surface coated. The small scale characterization testing, such as closed bomb testing, small scale sensitivity, thermal stability, and

  1. Autonomous Propellant Loading Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Autonomous Propellant Loading (APL) project consists of three activities. The first is to develop software that will automatically control loading of...

  2. Six-month Outcomes of Mobile Phone Application-based Self-management in a Patient with Type 2 Diabetes.

    Science.gov (United States)

    Hong, Mi Kyeong; Cho, Young Yun; Rha, Mi Yong; Kim, Jae Hyeon; Lee, Moon-Kyu

    2015-07-01

    We report the case in order to examine the effect of a mobile application program ("Diabetes & Nutrition") developed in 2011-2012 for self-management in patients with type 2 diabetes and to recommend important considerations when the mobile application program is developed. A 46-year-old man was newly diagnosed with type 2 diabetes in 2013 and had no complications. The height of the patient was 168 cm and the body weight was 75.6 kg. Nutrition education was conducted according to a medical prescription, and follow-up nutrition education was conducted after 3 and 6 months. After nutrition education, the patient was engaged in self-management using "Diabetes & Nutrition" program during 3 months. At 3 months, the body weight had decreased by 4.4 kg (from 75.6 to 71.2 kg), waist circumference by 5 cm (from 88 to 83 cm) and HbA1c level from 7.9% to 6.1%. Also at 3 months, the medication was reduced from from the dose of 850 mg to the dose of 500 mg metformin per twice a day. Since then, the patient did not continue to use the "Diabetes & Nutrition" because the level of blood glucose had stabilized, and the patient felt inconvenient and annoying to use the program. At 6 months, no significant change in the body weight and body composition was observed in comparison with those at 3 months. The present case demonstrates that the early use of "Diabetes & Nutrition" could be helpful for self-management of glycemic control in patients with type 2 diabetes. Developing self-management mobile application programs in the future will require strategies of how to promote continuous use of application program and self-management of type 2 diabetes.

  3. Microcomputers take over in off-shore process

    Energy Technology Data Exchange (ETDEWEB)

    Claricoates, J

    1978-10-01

    The special capabilities and adaptability of microcomputers are typically demonstrated by the use of them on Mobil Exploration, Norway, Inc.'s Statfjord A Condeep platform. One of the unique features of offshore oil production is that so many different operations are conducted in a very confined space. On Statfjord A drilling, production, storage of crude oil, gas compression for sale or reinjection, custody transfer, generation and distribution of a significant amount of electric power, a hotel facility, and flight operations, all have to be accommodated and controlled. Superimposed on these are comprehensive fire detection and shutdown systems. In such a highly complex, densely packed, and highly interactive environment, a supervisory control and data acquisition system (SCADA) by providing coordinated and easily read displays, better records for alarm analysis, and possibly suggesting corrective action when a fault does occur, is an essential aid to an operator, whose decisions must always by correct.

  4. Design Technique for the High-Boiling Propellant Storage and Preparation Facility at the Cosmodrome «Vostochny»

    Directory of Open Access Journals (Sweden)

    O. E. Denisov

    2014-01-01

    Full Text Available The offered project of storage facility allows us to simplify and unitise the ground-based infrastructure objects. The storage facility implements a full preparatory cycle of the propellant components (PC in all parameters. Another problem the developers of complexes of groundbased equipment face now is bulk receipt of PC from manufacturer. The tanks of launch complexes cannot accept such volumes of propellant. It proves that there is a need to create a storage facility. The facility solves problems concerning the components receipt, temperature preparation, moisture content (drying, gas content, and supply to consumers. For preparation the perspective technologies with low power consumption are used.Receiving the propellant from the dispensing platform is carried out via filters of rough cleaning. Transfer from transport tankage goes using a pump. The received product passes through a gas separator to clean technological gas impurity.To prepare propellant temperature, a technology of cryogenic bubbling by boiling nitrogen is chosen. To improve efficiency of cryogenic bubbling it is advised to use the specialized capacities. Railway dimensions, admissible for the trainload goods across the railroads of Siberia and the Far East, define their sizes.As a drying technology and a gas content preparation the preliminary propellant filtration using vertical electro-separators is chosen to save a space. The chamber vertical electroseparators allow 2 — 3 times increase of dehydration capacity.The article presents calculations to prove that using the chosen cooling and drying technologies is efficient.Prepared PC can be supplied:• to transport-fueling containers (TFC with the subsequent transportation to the launch complexes either by the railway or by road;• to mobile fuelling tanks, which feed rocket-carrier tanks on arrival at the blast-off;• to transport capacities for transportation to the object outside the cosmodrome (spaceport;• directly

  5. 10 CFR 150.7 - Persons in offshore waters not exempt.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Persons in offshore waters not exempt. 150.7 Section 150.7... AGREEMENT STATES AND IN OFFSHORE WATERS UNDER SECTION 274 Continued Commission Regulatory Authority in Offshore Waters § 150.7 Persons in offshore waters not exempt. Persons in offshore waters are not exempt...

  6. Blade Section Lift Coefficients for Propellers at Extreme Off-Design Conditions

    National Research Council Canada - National Science Library

    Shen, Young

    1997-01-01

    The Propeller Force Module (PFM) code developed by Analytical Methods Inc. (AMI) for calculating propeller side forces during maneuvering simulation studies requires inputs of propeller blade sectional lift, drag, and moment data...

  7. Self-care and mobility skills in children with cerebral palsy, related to their manual ability and gross motor function classifications.

    Science.gov (United States)

    Öhrvall, Ann-Marie; Eliasson, Ann-Christin; Löwing, Kristina; Ödman, Pia; Krumlinde-Sundholm, Lena

    2010-11-01

    The aim of this study was to investigate the acquisition of self-care and mobility skills in children with cerebral palsy (CP) in relation to their manual ability and gross motor function. Data from the Pediatric Evaluation of Disability Inventory (PEDI) self-care and mobility functional skill scales, the Manual Ability Classification System (MACS), and the Gross Motor Function Classification System (GMFCS) were collected from 195 children with CP (73 females, 122 males; mean age 8 y 1 mo; SD 3 y 11 mo; range 3-15 y); 51% had spastic bilateral CP, 36% spastic unilateral CP, 8% dyskinetic CP, and 3% ataxic CP. The percentage of children classified as MACS levels I to V was 28%, 34%, 17%, 7%, and 14% respectively, and classified as GMFCS levels I to V was 46%, 16%, 15%, 11%, and 12% respectively. Children classified as MACS and GMFCS levels I or II scored higher than children in MACS and GMFCS levels III to V on both the self-care and mobility domains of the PEDI, with significant differences between all classification levels (pskills (66%) and that GMFCS was the strongest predictor of mobility skills (76%). A strong correlation between age and self-care ability was found among children classified as MACS level I or II and between age and mobility among children classified as GMFCS level I. Many of these children achieved independence, but at a later age than typically developing children. Children at other MACS and GMFCS levels demonstrated minimal progress with age. Knowledge of a child's MACS and GMFCS level can be useful when discussing expectations of, and goals for, the development of functional skills. © The Authors. Journal compilation © Mac Keith Press 2010.

  8. Thermal Decomposition Behaviors and Burning Characteristics of AN/Nitramine-Based Composite Propellant

    Science.gov (United States)

    Naya, Tomoki; Kohga, Makoto

    2015-04-01

    Ammonium nitrate (AN) has attracted much attention due to its clean burning nature as an oxidizer. However, an AN-based composite propellant has the disadvantages of low burning rate and poor ignitability. In this study, we added nitramine of cyclotrimethylene trinitramine (RDX) or cyclotetramethylene tetranitramine (HMX) as a high-energy material to AN propellants to overcome these disadvantages. The thermal decomposition and burning rate characteristics of the prepared propellants were examined as the ratio of AN and nitramine was varied. In the thermal decomposition process, AN/RDX propellants showed unique mass loss peaks in the lower temperature range that were not observed for AN or RDX propellants alone. AN and RDX decomposed continuously as an almost single oxidizer in the AN/RDX propellant. In contrast, AN/HMX propellants exhibited thermal decomposition characteristics similar to those of AN and HMX, which decomposed almost separately in the thermal decomposition of the AN/HMX propellant. The ignitability was improved and the burning rate increased by the addition of nitramine for both AN/RDX and AN/HMX propellants. The increased burning rates of AN/RDX propellants were greater than those of AN/HMX. The difference in the thermal decomposition and burning characteristics was caused by the interaction between AN and RDX.

  9. DE-Sync: A Doppler-Enhanced Time Synchronization for Mobile Underwater Sensor Networks.

    Science.gov (United States)

    Zhou, Feng; Wang, Qi; Nie, DongHu; Qiao, Gang

    2018-05-25

    Time synchronization is the foundation of cooperative work among nodes of underwater sensor networks; it takes a critical role in the research and application of underwater sensor networks. Although numerous time synchronization protocols have been proposed for terrestrial wireless sensor networks, they cannot be directly applied to underwater sensor networks. This is because most of them typically assume that the propagation delay among sensor nodes is negligible, which is not the case in underwater sensor networks. Time synchronization is mainly affected by a long propagation delay among sensor nodes due to the low propagation speed of acoustic signals. Furthermore, sensor nodes in underwater tend to experience some degree of mobility due to wind or ocean current, or some other nodes are on self-propelled vehicles, such as autonomous underwater vehicles (AUVs). In this paper, we propose a Doppler-enhanced time synchronization scheme for mobile underwater sensor networks, called DE-Sync. Our new scheme considers the effect of the clock skew during the process of estimating the Doppler scale factor and directly substitutes the Doppler scale factor into linear regression to achieve the estimation of the clock skew and offset. Simulation results show that DE-Sync outperforms existing time synchronization protocols in both accuracy and energy efficiency.

  10. Water-hydraulic power transmission for offshore wind farms

    NARCIS (Netherlands)

    Diepeveen, N.F.B.; Jarquin Laguna, A.; Kempenaar, A.S.

    2012-01-01

    The current state of the art of offshore wind turbine power transmission technology is expensive, heavy and maintenance intensive. The Delft Offshore Turbine project considers a radically new concept for power transmission in an offshore wind farm: using seawater as power transmission medium. For

  11. Process for the leaching of AP from propellant

    Science.gov (United States)

    Shaw, G. C.; Mcintosh, M. J. (Inventor)

    1980-01-01

    A method for the recovery of ammonium perchlorate from waste solid rocket propellant is described wherein shredded particles of the propellant are leached with an aqueous leach solution containing a low concentration of surface active agent while stirring the suspension.

  12. Offshore Wind Energy Systems Engineering Curriculum Development

    Energy Technology Data Exchange (ETDEWEB)

    McGowan, Jon G. [Univ. of Massachusetts, Amherst, MA (United States); Manwell, James F. [Univ. of Massachusetts, Amherst, MA (United States); Lackner, Matthew A. [Univ. of Massachusetts, Amherst, MA (United States)

    2012-12-31

    Utility-scale electricity produced from offshore wind farms has the potential to contribute significantly to the energy production of the United States. In order for the U.S. to rapidly develop these abundant resources, knowledgeable scientists and engineers with sound understanding of offshore wind energy systems are critical. This report summarizes the development of an upper-level engineering course in "Offshore Wind Energy Systems Engineering." This course is designed to provide students with a comprehensive knowledge of both the technical challenges of offshore wind energy and the practical regulatory, permitting, and planning aspects of developing offshore wind farms in the U.S. This course was offered on a pilot basis in 2011 at the University of Massachusetts and the National Renewable Energy Laboratory (NREL), TU Delft, and GL Garrad Hassan have reviewed its content. As summarized in this report, the course consists of 17 separate topic areas emphasizing appropriate engineering fundamentals as well as development, planning, and regulatory issues. In addition to the course summary, the report gives the details of a public Internet site where references and related course material can be obtained. This course will fill a pressing need for the education and training of the U.S. workforce in this critically important area. Fundamentally, this course will be unique due to two attributes: an emphasis on the engineering and technical aspects of offshore wind energy systems, and a focus on offshore wind energy issues specific to the United States.

  13. Propeller TAP flap

    DEFF Research Database (Denmark)

    Thomsen, Jørn Bo; Bille, Camilla; Wamberg, Peter

    2013-01-01

    major complications needing additional surgery. One flap was lost due to a vascular problem. Breast reconstruction can be performed by a propeller TAP flap without cutting the descending branch of the thoracodorsal vessels. However, the authors would recommend that a small cuff of muscle is left around...

  14. Offshoring in textile industry

    OpenAIRE

    MONTÓN GARCÍA, JORGE

    2015-01-01

    [ EN] This project is about offshoring in the textile industry, focusing in the rights violated in this process, this concept can be defined as the moving of various operations of a company to another country for reasons such as lower labor costs or more favorable economic conditions in that other country. The project describes the evolution of offshoring, which started in 1960’s and has continued since then; it was characterized primarily by the transferring of factories from the develope...

  15. Structure of Partially Premixed Flames and Advanced Solid Propellants

    National Research Council Canada - National Science Library

    Branch, Melvyn

    1998-01-01

    The combustion of solid rocket propellants of advanced energetic materials involves a complex process of decomposition and condensed phase reactions in the solid propellant, gaseous flame reactions...

  16. Stereospecific Winding of Polycyclic Aromatic Hydrocarbons into Trinacria Propellers.

    Science.gov (United States)

    Mosca, Dario; Stopin, Antoine; Wouters, Johan; Demitri, Nicola; Bonifazi, Davide

    2017-11-02

    The stereospecific trimerization of enantiomerically pure binaphthols with hexakis(bromomethyl)benzene gives access in one step to enantiomerically pure molecular propellers, in which three binaphthyl rings are held together with dioxecine rings. X-ray diffraction analysis revealed that three out the six naphthyl moieties are folded in a (EF) 3 -type arrangement held by three intramolecular C-H⋅⋅⋅π interactions. This slips outward the three remaining naphthyl rings in a blade-like fashion, just like in three-folded propeller components. This peculiar conformation shows striking similarity to the mythological Sicilian symbol of Trinacria, from which the name "trinacria propeller" derives. The propeller conformation is also preserved in chlorinated solutions, as displayed by the presence of a peak at 4.7 ppm typical of an aromatic proton resonance engaged in a C-H⋅⋅⋅π interaction. The denaturation of the propeller-like conformation is obtained at high temperature, corresponding to activation energy for the ring inversion of ca. 18.2 kcal mol -1 . Notably, halide-functionalized molecular propellers exposing I-atoms at the leading and trailing edges could be prepared stereo- and regiospecifically by choosing the relevant iodo-bearing BINOL derivative. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Studies of pellet acceleration with arc discharge heated propellants

    International Nuclear Information System (INIS)

    Schuresko, D.D.

    1985-01-01

    An arc discharge has been utilized to heat gaseous propellants in a pneumatic pellet gun. A cylindrical arc chamber is interposed between the propellant inlet valve and the gun breech and fitted with a ceramic insert for generating swirl in the incoming gas stream. The arc is initiated after the propellant valve opens and the breech pressure starts to rise; a typical discharge lasts 300 microseconds with peak currents u to 2 kA at arc voltages ranging from 100 to 400 V. The system is instrumented with piezoelectric pressure transducers at the propellant valve outlet, gun breech, and gun muzzle. The gun has been operated with 4 mm diameter polyurethane foam pellets (density = 0.14 g/cm 3 ), a 40 cm-long barrel, and various gas propellants at pressures exceeding 70 bar. At I/sub arc/ = 1 kA, V/sub arc/ = 200 V, with helium propellant, the arc produces a 2 to 3 fold prompt increase in P/sub breech/ and a delayed increase in P/sub muzzle/; the pellets exit the gun from 0.5 to 1.0 ms earlier than with the gas alone at 40% higher speeds. Comparisons with the so-called ideal gun theory and with full one-dimensional hydrodynamic calculations of the pellet acceleration will be presented

  18. Studies of pellet acceleration with arc discharge heated propellants

    International Nuclear Information System (INIS)

    Schuresko, D.D.

    1986-01-01

    An arc discharge has been utilized to heat gaseous propellants in a pneumatic pellet gun. A cylindrical arc chamber is interposed between the propellant inlet valve and the gun breech and fitted with a ceramic insert for generating swirl in the incoming gas stream. The arc is initiated after the propellant valve opens and the breech pressure starts to rise; a typical discharge lasts 300 microseconds with peak currents up to 2 kA at arc voltages ranging from 100-400 V. The system is instrumented with piezoelectric pressure transducers at the propellant valve outlet, gun breech, and gun muzzle. The gun has been operated with 4 mm diameter polyurethane foam pellets (density = 0.14 g/cm 3 ), a 40 cm-long barrel, and various gas propellants at pressures exceeding 70 bar. At I/sub arc/ = 1 kA, V/sub arc/ = 200 V, with helium propellant, the arc produces a 2-3 fold prompt increase in P/sub breech/ and a delayed increase in P/sub muzzle/; the pellets exit the gun from 0.5-1.0 ms earlier than with the gas alone at 40% higher speeds. Comparisons with the so-called ideal gun theory and with full one-dimensional hydrodynamic calculations of the pellet acceleration will be presented

  19. Boundary Spanning in Offshored Information Systems Development Projects

    Science.gov (United States)

    Krishnan, Poornima

    2010-01-01

    Recent growth in offshore outsourcing of information systems (IS) services is accompanied by managing the offshore projects successfully. Much of the project failures can be attributed to geographic and organizational boundaries which create differences in culture, language, work patterns, and decision making processes among the offshore project…

  20. Nonlinear Output Feedback Control of Underwater Vehicle Propellers using Advance Speed Feedback

    DEFF Research Database (Denmark)

    Fossen, T.I.; Blanke, M.

    1999-01-01

    More accurate propeller shaft speed controllers can be designed by using nonlinear control theory. In this paper, an output feedback controller reconstructing the advance speed (speed of water going into the propeller) from vehicle speed measurements is derived. For this purpose a three-state model...... minimizes thruster losses due to variations in propeller axial inlet flow which is a major problem when applying conventional vehicle-propeller control systems. The proposed controller is simulated for an underwater vehicle equipped with a single propeller. From the simulations it can be concluded...... of propeller shaft speed, forward (surge) speed of the vehicle and axial inlet flow of the propeller is applied. A nonlinear observer in combination with an output feedback integral controller are derived by applying Lyapunov stability theory and exponential stability is proven. The output feedback controller...

  1. Offshore wind resources at Danish measurement sites

    Energy Technology Data Exchange (ETDEWEB)

    Barthelmie, R J; Courtney, M S; Lange, B; Nielsen, M; Sempreviva, A M [Risoe National Lab., Dept. of Wind Energy and Atmospheric Physics, Roskilde (Denmark); Svenson, J; Olsen, F [SEAS, Haslev (Denmark); Christensen, T [Elsamprojekt, Fredericia (Denmark)

    1999-03-01

    In order to characterise wind and turbulence characteristics at prospective offshore wind energy sites, meteorological observations from a number of purpose-built offshore monitoring sites have been analyzed and compared with long wind speed time series. New analyses have been conducted on the data sets focussing on meteorology, turbulence, extreme winds and wind and wave interactions. Relationships between wind speed, turbulence and fetch are highly complex. Minimum turbulence intensity offshore is associated with wind speeds of about 12 m/s. At lower wind speeds, stability effects are important while at higher winds speeds wind and wave interactions appear to dominate. On average, turbulence intensity offshore at 48 m height is approximately 0.08 if no coastal effects are present. However, the effect of the coastal discontinuity persists in wind speed and turbulence characteristics for considerable distances offshore. The majority of the adjustment of appears to occur within 20 km of the coast. (au)

  2. Propellant Slosh Force and Mass Measurement

    Directory of Open Access Journals (Sweden)

    Andrew Hunt

    2018-01-01

    Full Text Available We have used electrical capacitance tomography (ECT to instrument a demonstration tank containing kerosene and have successfully demonstrated that ECT can, in real time, (i measure propellant mass to better than 1% of total in a range of gravity fields, (ii image propellant distribution, and (iii accurately track propellant centre of mass (CoM. We have shown that the ability to track CoM enables the determination of slosh forces, and we argue that this will result in disruptive changes in a propellant tank design and use in a spacecraft. Ground testing together with real-time slosh force data will allow an improved tank design to minimize and mitigate slosh forces, while at the same time keeping the tank mass to a minimum. Fully instrumented Smart Tanks will be able to provide force vector inputs to a spacecraft inertial navigation system; this in turn will (i eliminate or reduce navigational errors, (ii reduce wait time for uncertain slosh settling, since actual slosh forces will be known, and (iii simplify slosh control hardware, hence reducing overall mass. ECT may be well suited to space borne liquid measurement applications. Measurements are independent of and unaffected by orientation or levels of g. The electronics and sensor arrays can be low in mass, and critically, the technique does not dissipate heat into the propellant, which makes it intrinsically safe and suitable for cryogenic liquids. Because of the limitations of operating in earth-bound gravity, it has not been possible to check the exact numerical accuracy of the slosh force acting on the vessel. We are therefore in the process of undertaking a further project to (i build a prototype integrated “Smart Tank for Space”, (ii undertake slosh tests in zero or microgravity, (iii develop the system for commercial ground testing, and (iv qualify ECT for use in space.

  3. Offshore Vendors’ Software Development Team Configurations

    DEFF Research Database (Denmark)

    Chakraborty, Suranjan; Sarker, Saonee; Rai, Sudhanshu

    2012-01-01

    This research uses configuration theory and data collected from a major IT vendor organization to examine primary configurations of distributed teams in a global off-shoring context. The study indicates that off-shoring vendor organizations typically deploy three different types of configurations...

  4. Discovery Of B Ring Propellers In Cassini UVIS, And ISS

    Science.gov (United States)

    Sremcevic, Miodrag; Stewart, G. R.; Albers, N.; Esposito, L. W.

    2012-10-01

    We present evidence for the existence of propellers in Saturn's B ring by combining data from Cassini Ultraviolet Imaging Spectrograph (UVIS) and Imaging Science Subsystem (ISS) experiments. We identify two propeller populations: (1) tens of degrees wide propellers in the dense B ring core, and (2) smaller, more A ring like, propellers populating the inner B ring. The prototype of the first population is an object observed at 18 different epochs between 2005 and 2010. The ubiquitous propeller "S" shape is seen both in UVIS occultations as an optical depth depletion and in ISS as a 40 degrees wide bright stripe in unlit geometries and dark in lit geometries. Combining the available Cassini data we infer that the object is a partial gap embedded in the high optical depth region of the B ring. The gap moves at orbital speed consistent with its radial location. From the radial separation of the propeller wings we estimate that the embedded body, which causes the propeller structure, is about 1.5km in size located at a=112,921km. The UVIS occultations indicate an asymmetric propeller "S" shape. Since the object is located at an edge between high and relatively low optical depth, this asymmetry is most likely a consequence of the strong surface mass density gradient. We estimate that there are possibly dozen up to 100 other propeller objects in Saturn's B ring. The location of the discovered body, at an edge of a dense ringlet within the B ring, suggests a novel mechanism for the up to now illusive B ring irregular large-scale structure of alternating high and low optical depth ringlets. We propose that this B ring irregular structure may have its cause in the presence of many embedded bodies that shepherd the individual B ring ringlets.

  5. EWeA Offshore 2013 - Side event: 'Offshore wind energy - Potentialities and industrial opportunities in France and in Germany. French-German cross perspectives

    International Nuclear Information System (INIS)

    Genachte, Anne-Benedicte; Kavafyan, Philippe; Wagner, Andreas; Bour, Gregoire

    2013-01-01

    At the EWEA Offshore 2013 exhibition, the French-German office for Renewable energies (OFAEnR) organised a side-conference on Offshore wind energy and its Potentialities and industrial opportunities in France and in Germany. In the framework of this French-German exchange of experience, about 50 participants exchanged views on the conditions for the development of a durable offshore wind energy industry both in France and in Germany. This document brings together the available presentations (slides) made during this event: 1 - Supporting industrial development of offshore wind in Europe (Anne-Benedicte Genachte); 2 - Offshore wind energy: the Bremerhaven experience. An asset for the deployment of a complete industrial field in France (Philippe Kavafyan); 3 - Status, Prospects and Challenges for Offshore Wind energy in Germany - incl. Legal Framework and Presentation of cost reduction study results (Andreas Wagner); 4 - Offshore grid connection in Germany - Challenges and recommendations (Gregoire Bour)

  6. Authoring Tool for Identifying Learning Styles, Using Self-Organizing Maps on Mobile Devices

    Directory of Open Access Journals (Sweden)

    Ramón Zatarain Cabada

    2011-05-01

    Full Text Available This work explores a methodological proposal whose main objective is the identification of learning styles using a method of self-organizing maps designed to work, for the most part, on mobile devices. These maps can work in real time and without direct student interaction, which implies the absence of prior information. The results generated are an authoring tool for adaptive courses in Web 2.0 environments.

  7. A Mixed-Method Study of Mobile Devices and Student Self-Directed Learning and Achievement during a Middle School STEM Activity

    Science.gov (United States)

    Bartholomew, Scott

    2016-01-01

    With the increasingly ubiquitous nature of mobile devices among K-12 students, many argue for and against the inclusion of these devices in K-12 classrooms. Arguments in favor cite instant access to information and collaboration with others as positive affordances made possible through mobile devices. Self-directed learning, a process where…

  8. The EU Offshore Safety Directive and its potential effects. Opportunity or handicap?; Die EU Offshore Safety Directive und ihre moeglichen Auswirkungen. Chance oder Handicap?

    Energy Technology Data Exchange (ETDEWEB)

    Schwiederowski, Claudia [RWE Dea AG, Hamburg (Germany)

    2014-07-01

    The purpose of the EU Offshore Safety Directive, which took effect on 18 July 2013, is to define minimum requirements for the prevention of severe accidents in connection with offshore crude oil or natural gas activities of any kind and the containment of the follow-on effects of such accidents. This is without question a logical consequence of the offshore incidents seen around the globe over the past decades. An interesting question in this context is for whom the EU Offshore Safety Directive has become an opportunity and for whom a handicap. [German] Ziel der am 18. Juli 2013 in Kraft getretenen EU Offshore Safety Direktive ist die Festlegung von Mindestanforderungen fuer die Verhinderung schwerer Unfaelle bei Offshore-Erdoel- bzw. - Erdgasaktivitaeten und die Begrenzung etwaiger Unfallfolgen. Nach den weltweiten Offshore- Ereignissen der vergangenen Jahrzehnte ist dies ohne Zweifel eine logische Entwicklung. Nun stellt sich die Frage: Fuer wen entwickelt sich die EU Offshore Safety Directive zur Chance, fuer wen zum Handicap?.

  9. Long-term engagement with a mobile self-management system for people with type 2 diabetes.

    Science.gov (United States)

    Tatara, Naoe; Arsand, Eirik; Skrøvseth, Stein Olav; Hartvigsen, Gunnar

    2013-03-27

    In a growing number of intervention studies, mobile phones are used to support self-management of people with Type 2 diabetes mellitus (T2DM). However, it is difficult to establish knowledge about factors associated with intervention effects, due to considerable differences in research designs and outcome measures as well as a lack of detailed information about participants' engagement with the intervention tool. To contribute toward accumulating knowledge about factors associated with usage and usability of a mobile self-management application over time through a thorough analysis of multiple types of investigation on each participant's engagement. The Few Touch application is a mobile-phone-based self-management tool for patients with T2DM. Twelve patients with T2DM who have been actively involved in the system design used the Few Touch application in a real-life setting from September 2008 until October 2009. During this period, questionnaires and semistructured interviews were conducted. Recorded data were analyzed to investigate usage trends and patterns. Transcripts from interviews were thematically analyzed, and the results were further analyzed in relation to the questionnaire answers and the usage trends and patterns. The Few Touch application served as a flexible learning tool for the participants, responsive to their spontaneous needs, as well as supporting regular self-monitoring. A significantly decreasing (Pmanual entry; intuitive and informative feedback; and rich learning materials, especially about foods. Many grounded design implications were identified through a thorough analysis of results from multiple types of investigations obtained through a year-long field trial of the Few Touch application. The study showed the importance and value of involving patient-users in a long-term trial of a tool to identify factors influencing usage and usability over time. In addition, the study confirmed the importance of detailed analyses of each participant

  10. The offshorization of economy: the present realities

    Directory of Open Access Journals (Sweden)

    Maslak Olga

    2017-01-01

    Full Text Available In this article the essence and main types of offshore zones have been studied. It has been analyzed the main reasons for cooperation with the tax havens, established that the main reason of the Ukrainian economy offshorization is not only the desire of economic entities to optimize taxes, but also the desire to protect their assets from the negative impact of the crisis phenomena in the national economy during 2010-2016. The foreign experience of the anti-offshore regulation has been researched. It has been defined that the general anti-offshore regulation vector should be based on the principles of financial transparency, active cooperation with the international community, an optimal combination of instruments that restrict the capital outflows and the effective instruments that stimulate the business development in the country. It has been also established that the mechanism of deoffshorization should be aimed not only at elimination of the territories with the preferential taxation, but also at receiving benefits from their use on the basis of the existing financial infrastructure of the leading world offshore centers. The experience of China in attracting additional foreign investments, gaining wider access to financial resources through the cooperation with an offshore financial centre has been researched.

  11. Propellant selection for ramjets with solid fuel

    Energy Technology Data Exchange (ETDEWEB)

    Schmucker, R H; Lips, H

    1976-03-11

    Ramjet propulsion using solid propellant for post-boost acceleration of missiles exhibits several favorable properties, brought about by heterogeneous combustion. A simplified theory for calculating the performance of possible propellants is presented, and they are classified with respect to maximum fuel-specific impulse. The optimal choice of fuel, from a system standpoint, must consider volume constraints, and defines the requirements for motor geometry.

  12. Offshoring and financial markets

    Directory of Open Access Journals (Sweden)

    Gianfranco Battisti

    2014-06-01

    Full Text Available The paper analyses the nature and extent of the offshore world, a grey area that is playing a major role in present-day economy. The main institutions moulding this peculiar environment are discussed: preferential tax regimes, tax havens and offshore financial centers. Their role in the globalised world is outlined after a scrutiny of the specialized literature, reports by non-governmental bodies and companies’ advertisings. Finally, we present a tentative reconstruction of its geographical organization, inclusive of cartographic representations of the main international networks.

  13. Air propellers and their environmental problems on ACV's

    Science.gov (United States)

    Soley, D. H.

    The development of ACV blade protection against erosion, both on the propeller blade faces and leading edge, is considered. Polyurethane spray coating is now the standard protection applied to all Dowty Rotol propellers, with thicknesses from 0.015-0.020 on aircraft, and up to 0.080 on the ACV. The bolt-on guard reduced leading edge replacement time by 50 percent, and makes possible replacement in all weather conditions. Typical damage and repairs to ACV blades are discussed, and the propeller installation on the LCAC craft being built for the U.S. Navy is addressed.

  14. Numerically-based ducted propeller design using vortex lattice lifting line theory

    OpenAIRE

    Stubblefield, John M.

    2008-01-01

    CIVINS (Civilian Institutions) Thesis document This thesis used vortex lattice lifting line theory to model an axisymmetrical-ducted propeller with no gap between the duct and the propeller. The theory required to model the duct and its interaction with the propeller were discussed and implemented in Open-source Propeller Design and Analysis Program (OpenProp). Two routines for determining the optimum circulation distribution were considered, and a method based on calculus of variation...

  15. Advanced technologies available for future solid propellant grains

    Energy Technology Data Exchange (ETDEWEB)

    Thepenier, J. [SNPE Propulsion, St Medard en Jalles (France); Fonblanc, G. [SNPE Propulsion, Vert le Petit (France). Centre de Recherche de Bouchet

    2001-06-01

    Significant advances have been made during the last decade in several fields of solid propulsion: the advances have enabled new savings in the motor development phase and in recurring costs, because they help limit the number of prototypes and tests. The purpose of the paper is to describe the improvements achieved by SNPE in solid grain technologies, making these technologies available for new developments in more efficient and reliable future SRMs: new energetic molecules, new solid propellants, new processes for grain manufacturing, quick response grain design tools associated with advanced models for grain performance predictions. Using its expertise in chemical synthesis, SNPE develops new molecules to fit new energetic material requirements. Tests based on new propellant formulations have produced good results in the propellant performance/safety behavior ratio. New processes have been developed simultaneously to reduce the manufacturing costs of the new propellants. In addition, the grain design has been optimized by using the latest generation of predictive theoretical tools supported by a large data bank of experimental parameters resulting from over 30 years' experience in solid propulsion: computer-aided method for the preliminary grain design; advanced models for SRM operating and performance predictions. All these technologies are available for industrial applications in future developments of solid propellant grains. (author)

  16. 31 CFR 587.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 587.406 Section 587.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... MONTENEGRO) MILOSEVIC SANCTIONS REGULATIONS Interpretations § 587.406 Offshore transactions. The prohibitions...

  17. Project alliancing in the offshore industry

    NARCIS (Netherlands)

    Halman, Johannes I.M.; Braks, B.F.M.

    In this paper the shift towards new types of project organisation within the Offshore Industry is explained and discussed. Special focus is given to the organisational concept of Project Alliancing. The principles, structure and culture of a Project Alliance as applied within the Offshore Industry

  18. Screening Criteria and Considerations of Offshore Enhanced Oil Recovery

    Directory of Open Access Journals (Sweden)

    Pan-Sang Kang

    2016-01-01

    Full Text Available The application of enhanced oil recovery (EOR in offshore oil fields has received significant attention due to the potentially enormous amount of recoverable oil. However, EOR application offshore is in its very early stage due to conditions that are more complex than onshore oil fields, owing to the unique parameters present offshore. Therefore, successful EOR applications in offshore oil fields require different screening criteria than those for conventional onshore applications. A comprehensive database for onshore applications of EOR processes together with a limited offshore EOR application database are analyzed in this paper, and the important parameters for successful offshore application are incorporated into the new EOR screening criteria. In this paper, screening criteria to determine acceptable EOR processes for offshore fields, including hydrocarbon gas miscible, CO2 miscible, and polymer processes, are presented. Suggested screening criteria for these EOR processes comprise quantitative boundaries and qualitative considerations. Quantitative screening criteria are predominantly based on quantifiable data, such as oil and reservoir properties. Qualitative screening considerations mainly focus on the operational issues present offshore, including platform space constraints, limited disposal options, injectant availability, and flow assurance matters (including hydrate formation and difficulties in emulsion separation.

  19. The Relationship Between Individual Characteristics and Interest in Using a Mobile Phone App for HIV Self-Management: Observational Cohort Study of People Living With HIV.

    Science.gov (United States)

    Lucero, Robert James; Frimpong, Jemima A; Fehlberg, Elizabeth A; Bjarnadottir, Ragnhildur I; Weaver, Michael T; Cook, Christa; Modave, Francois; Rathore, Mobeen H; Morano, Jamie P; Ibanez, Gladys; Cook, Robert L

    2017-07-27

    The human immunodeficiency virus (HIV) continues to be a major health issue in the United States, and an estimated 1.2 million people in the United States are living with HIV. As part of Healthy People 2020, the Office of Disease Prevention and Health Promotion has targeted the persistent demographic and geographic disparities in HIV prevalence and management. Preliminary evidence suggests that mobile health technology (smartphone apps) may be a promising way to support HIV self-management among vulnerable populations of people living with HIV (PLWH) who lack access to appropriate health care services. This study examines the association between individual characteristics of PLWH and level of interest in using a free mobile phone app for HIV self-management. This study was conducted using cross-sectional survey data collected in the Florida Cohort Study between 2014 and 2016 (N=766). Associations between individual characteristics of PLWH and level of interest in using a free mobile phone app for HIV self-management were examined using bivariate analysis and logistic regression. Overall, 85.5% (655/766) of respondents were interested in using a free mobile phone app that supports HIV self-management. Participants expressed the highest interest in app functions that facilitate communication with health care providers (568/740, 76.8%) or help to identify relevant health care services (556/745 74.6%). Age (OR 0.959, 95% CI 0.936-0.982), education (OR 1.281, 95% CI 1.027-1.598) and disability or inability to work (OR 0.296, 95% CI 0.145-0.606) were all significantly associated with being interested in using a free mobile phone app for HIV self-management. This study indicates that a majority of PLWH are interested in using a free mobile phone app to self-manage their condition. The findings can inform the development of mobile phone apps that support effective HIV self-management. ©Robert James Lucero, Jemima A Frimpong, Elizabeth A Fehlberg, Ragnhildur I Bjarnadottir

  20. Energy Usage of Residents on Offshore Islands in Taiwan

    Directory of Open Access Journals (Sweden)

    Szu-Cheng Lu

    2015-05-01

    Full Text Available A field study was conducted through interviews on offshore islands in Taiwan to investigate the energy usage of local residents. A comparison of household appliance usage in mainland Taiwan with that on the offshore islands revealed that, overall, the most commonly used household appliances are steam cookers/rice cookers, water dispensers, and washing machines. For other household appliances, Levels 2 and 3 offshore isles have lower use penetration rates compared with those in mainland Taiwan and on Level 1 offshore isles, particularly for the use of computers. By contrast, the use penetration rate for chest freezers on Levels 2 and 3 offshore isles is high, and each household has one or more freezers on average. This appliance is not a commonly observed household product in mainland Taiwan or on Level 1 offshore isles. Furthermore, because of the government policy, every household on parts of Level 2 offshore isles and on all Level 3 offshore isles has a fixed monthly charge of electricity. The transportation of liquefied petroleum gas is also inconvenient, and the gas price is slightly higher, leading to the tendency of residents to consume excessive amounts of electrical energy, which does not correspond with the aim of the government to conserve energy and reduce carbon emissions; thus, the relevant authorities’ review and improvement on energy consumption on Levels 2 and 3 offshore isles are required.

  1. Sensitivity analysis of floating offshore wind farms

    International Nuclear Information System (INIS)

    Castro-Santos, Laura; Diaz-Casas, Vicente

    2015-01-01

    Highlights: • Develop a sensitivity analysis of a floating offshore wind farm. • Influence on the life-cycle costs involved in a floating offshore wind farm. • Influence on IRR, NPV, pay-back period, LCOE and cost of power. • Important variables: distance, wind resource, electric tariff, etc. • It helps to investors to take decisions in the future. - Abstract: The future of offshore wind energy will be in deep waters. In this context, the main objective of the present paper is to develop a sensitivity analysis of a floating offshore wind farm. It will show how much the output variables can vary when the input variables are changing. For this purpose two different scenarios will be taken into account: the life-cycle costs involved in a floating offshore wind farm (cost of conception and definition, cost of design and development, cost of manufacturing, cost of installation, cost of exploitation and cost of dismantling) and the most important economic indexes in terms of economic feasibility of a floating offshore wind farm (internal rate of return, net present value, discounted pay-back period, levelized cost of energy and cost of power). Results indicate that the most important variables in economic terms are the number of wind turbines and the distance from farm to shore in the costs’ scenario, and the wind scale parameter and the electric tariff for the economic indexes. This study will help investors to take into account these variables in the development of floating offshore wind farms in the future

  2. Offshore Aquaculture: I Know It When I See It

    Directory of Open Access Journals (Sweden)

    Halley E. Froehlich

    2017-05-01

    Full Text Available Offshore aquaculture is increasingly viewed as a mechanism to meet growing protein demand for seafood, while minimizing adverse consequences on the environment and other uses in the oceans. However, despite growing interest in offshore aquaculture, there appears to be no consensus as to what measures commonly define an offshore site or how effects of offshore aquaculture—relative to more nearshore practices—are assessed. This lack of agreement on what constitutes offshore aquaculture has the potential to convolute communication, create uncertainty in regulatory processes, and impede understanding of the ecological implications of offshore farming. To begin addressing these issues, we reviewed and analyzed biologically-focused primary and gray literature (Ntotal = 70 that categorize and quantify characteristics of offshore aquaculture from around the world. We found that many “offshore” descriptions are relatively close to shore (<3 nm and significantly shallower (minimum depth ≤30 m than may be assumed. We also uncovered an overall lack of consistent reporting of even the most common location-focused metrics (distance from shore, depth, current, a dearth of impact related studies (n = 17, and narrow scope of the studies themselves (i.e., 82% nutrient pollution. Of the finite subset of articles that investigated negative ecological impacts of offshore aquaculture, we found the probability of any measurable impact from an offshore farm appears to significantly decrease with distance from the farm (probability of measurable response at 90 m ± SE = 0.01 ± 0.03. Such general, but informative points of reference could be more robustly quantified with better systematic and standardized reporting of physical farm characteristics and a broader scope of ecological investigation into the effects of marine aquaculture. With offshore aquaculture still in its infancy, consistent metrics are needed for a comparable framework to guide sustainable

  3. Propellant Gelation for Green In-Space Propulsion, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Concerns in recent years about the toxicity and safe handling of the storable class of propellants have led to efforts in greener monopropellants and bi-propellants....

  4. MoBall: An Energy-Harvesting & Self-Propelling Spherical Sensor Platform

    Data.gov (United States)

    National Aeronautics and Space Administration — There are many harsh, windy environments where a persistent in situ mobile sensor network could provide valuable data to help answer outstanding questions in the...

  5. Canadian East Coast offshore petroleum industry safe lifting practices respecting offshore pedestal cranes, offshore containers, loose gear, other lifting devices, and operational best practices : standard practices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-11-15

    This document was developed by a working group with representatives from the petroleum industry, the Offshore Petroleum Boards and Certifying Authorities. It outlines industry best practices for operators responsible for the management, planning and execution of offshore lifting operations. Its purpose is to assist in the interpretation of applicable legislation and standards. Considered within the practice are safe design requirements, manufacture, certification, testing, maintenance and inspection requirements for pedestal cranes, offshore containers, loose gear and lifting devices. Operational best practices for lifting operations are also included along with a section that identifies additional requirements for personnel lifting operations, including personnel transfers by crane and man-riding operations. 82 refs., 2 tabs., 4 figs., 3 appendices.

  6. 31 CFR 544.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 544.406 Section 544.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... SANCTIONS REGULATIONS Interpretations § 544.406 Offshore transactions. The prohibitions in § 544.201 on...

  7. 31 CFR 593.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 593.406 Section 593.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... SANCTIONS REGULATIONS Interpretations § 593.406 Offshore transactions. The prohibitions in § 593.201 on...

  8. 31 CFR 541.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 541.406 Section 541.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... § 541.406 Offshore transactions. The prohibitions in § 541.201 on transactions involving blocked...

  9. 31 CFR 537.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 537.406 Section 537.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... § 537.406 Offshore transactions. The prohibitions in § 537.201 on transactions involving blocked...

  10. 31 CFR 542.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 542.406 Section 542.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... § 542.406 Offshore transactions. The prohibitions in § 542.201 on transactions involving blocked...

  11. Viewing engineering offshoring in a network perspective

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Zhang, Yufeng; Ahmed-Kristensen, Saeema

    2013-01-01

    of how to effectively manage engineering offshoring activities in a context of global engineering networks. The main research question, therefore, is: “Can offshoring of engineering tasks be explained and managed using the concept of Global Engineering Networks (GEN)?” Effective approaches to handling...... of large multinational corporations in Denmark were carried out. Data gathering was mainly documentary studies and interviews. The main data analysis approaches were coding (Strauss and Corbin) and pattern-matching (Yin). The dataset was analysed using the GEN framework suggested by Zhang et al. and Zhang...... by extending the GEN framework to address complications within engineering offshoring. This strengthens both academic fields, and will be able to help engineering managers to develop appropriate engineering network configurations for offshore engineering operations....

  12. Managing Hidden Costs of Offshoring

    DEFF Research Database (Denmark)

    Larsen, Marcus M.; Pedersen, Torben

    2014-01-01

    This chapter investigates the concept of the ‘hidden costs’ of offshoring, i.e. unexpected offshoring costs exceeding the initially expected costs. Due to the highly undefined nature of these costs, we position our analysis towards the strategic responses of firms’ realisation of hidden costs....... In this regard, we argue that a major response to the hidden costs of offshoring is the identification and utilisation of strategic mechanisms in the organisational design to eventually achieving system integration in a globally dispersed and disaggregated organisation. This is heavily moderated by a learning......-by-doing process, where hidden costs motivate firms and their employees to search for new and better knowledge on how to successfully manage the organisation. We illustrate this thesis based on the case of the LEGO Group....

  13. Performance Analysis Rim Driven Propeller as a Propulsor using Open Water Test

    Directory of Open Access Journals (Sweden)

    Agoes Santoso

    2017-12-01

    Full Text Available The use of duct in propeller is one of the breakthrough in the development of the propeller. Ducting not only claimed to be increasing efficiency of the propeller, but also capable to protect the propeller from impact therefore propeller lifespan is longer. From that idea then RDP is created. RDP propeller blade are designed to be fix at their housing called Rim, in the other word, the driving force came from it’s rim. On current RDP blade used is non-conventional blade. This thesis will discuss about design analysis of Kaplan Propeller Kaplan Ka-70 that modified on it’s thickness distribution. On this thesis data that is varied is motor load. Simulation using Open Water Test. The result, highest value of KT and KQ occur on 30% motor load and highest efficiency is 18,338% achieved on 260 Rpm.

  14. Offshore Wind Turbine Design

    DEFF Research Database (Denmark)

    Frandsen, Sten; Hansen, Erik Asp; Ibsen, Lars Bo

    2006-01-01

    Current offshore wind turbine design methods have matured to a 1st generation state, manifested in the draft of a possible standard, IEC 61400-3 (2005). It is now time to investigate the possibilities of improving existing methods. To do so in an efficient manner a clear identification of the most...... important uncertainty drivers specific for offshore wind turbine design loads is required. Describing the initial efforts in a Danish research project, the paper points to focal points for research and development. These are mainly: soil-structure interaction, improved modelling of wave loads from deep...

  15. Efficient promotion of electricity production from offshore wind; Effiziente Foerderung der Stromerzeugung aus Offshore-Wind

    Energy Technology Data Exchange (ETDEWEB)

    Panzer, Christian; Auer, Hans; Lettner, Georg [Technische Univ. Wien (Austria). Energy Economics Group (EEG)

    2014-03-15

    Efficient promotion of electricity production from offshore wind stands in dynamic relationship with various influence factors, the most important of which are promotion instruments, topographic givens, regulation of grid connection, and supraregional market integration concepts. Using three case studies from different countries to highlight national differences in the promotion of offshore wind power plants the present analysis points out ways of improving the efficiency of promotion instruments.

  16. Offshore wind potential evaluation and remote sensing imagery; Evaluation du potentiel eolien offshore et imagerie satellitale

    Energy Technology Data Exchange (ETDEWEB)

    Fichaux, N.

    2003-12-15

    Offshore wind energy may help to contribute to the respect of the Kyoto objectives by Europe. It is a key issue to struggle against global change. To sit the future offshore wind parks, it is necessary to accurately evaluate the spatial repartition of the wind potential. We demonstrate that the offshore wind potential shall be represented by maps of wind statistics. As remote sensing is a tool for measuring space physical phenomena, we evaluate its potentialities for mapping wind statistics. Space-borne scatterometers enables the obtention of wind statistics, but far from our areas of interest and at low spatial resolution. Synthetic Aperture Radar (SAR) enables the computation of high resolution wind maps over our areas of interest, but are unsuitable to compute wind statistics. We define the mathematical framework of a statistical method. That method enables to take advantage of both scatterometer and SAR to compute maps of wind statistics at high spatial resolution over the areas of interest. It enables remote sensing to be used operationally to map the offshore wind potential. (author)

  17. 31 CFR 543.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 543.406 Section 543.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... Interpretations § 543.406 Offshore transactions. The prohibitions in § 543.201 on transactions or dealings...

  18. 31 CFR 597.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 597.406 Section 597.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... REGULATIONS Interpretations § 597.406 Offshore transactions. The prohibitions contained in § 597.201 apply to...

  19. 31 CFR 547.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 547.406 Section 547.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... REGULATIONS Interpretations § 547.406 Offshore transactions. The prohibitions in § 547.201 on transactions or...

  20. 31 CFR 548.406 - Offshore transactions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Offshore transactions. 548.406 Section 548.406 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... § 548.406 Offshore transactions. The prohibitions in § 548.201 on transactions or dealings involving...