Laser assisted self-pierce riveting of AZ31 magnesium alloy strips

International Nuclear Information System (INIS)

Durandet, Y.; Deam, R.; Beer, A.; Song, W.; Blacket, S.

2010-01-01

Laser assisted self-piercing riveting (LSPR) is a new solid state process that enables low ductility materials to be mechanically joined without cracking. A simple but effective thermal analysis of LSPR is presented that enabled both the absorption of the laser radiation and heat transfer between plies to be determined. The approach was applied to experimental data for LSPR joining of AZ31B-H24 magnesium alloy sheets. It is shown that by using this analytical approach, the temperature at the onset of joining could be estimated and related to observations of joint quality. It was found that crack-free joints were produced at strip temperatures above 200 o C at the time of rivet insertion.

Self pierce riveting in the car body construction; Stanznieten im Karosserieleichtbau

Energy Technology Data Exchange (ETDEWEB)

Ahlers-Hestermann, G. [Boellhoff GmbH, Bielefeld (Germany)

1999-09-01

As an alterantive to spotwelding, self pierce riveting becomes more and more important in light weight automotive body constructions. The difficulties or impossibility of spotwelding Aluminium and High Tensile Strength Steel or material mixtures accelerated this development. Even plastic material can be joined to metal. Important mechanical properties such as fatigue and crash behaviour are improved. Costs are at the same level. Two examples of body parts in aluminium (Audi A6 bonnet and BMW 3 series front end) are described. (orig.) [German] Als Alternative zum Punktschweissen setzt sich das Stanznieten mit Halbhohlniet im Karosserieleichtbau mehr und mehr durch. Mit diesem Verfahren koennen verschiedene Materialen mit bis zu vier Lagen sicher verbunden werden. Dieser Beitrag der Boellhoff GmbH stellt das Verfahren vor und berichtet ueber zwei Beispiele aus der Praxis. (orig.)

Detection of Fatigue Cracks at Rivets with Self-Nulling Probe

Science.gov (United States)

Wincheski, Buzz; Fulton, Jim; Nath, Shridhar; Namkung, Min

1994-01-01

A new eddy current probe developed at NASA Langley Research Center has been used to detect small cracks at rivets in aircraft lap splices [1]. The device has earlier been used to detect isolated fatigue cracks with a minimum detectable flaw size of roughly 1/2 to 1/3 the diameter of the probe [2]. The present work shows that the detectable flaw size for cracks originating at rivets can be greatly improved upon from that of isolated flaws. The use of a rotating probe method combined with spatial filtering has been used to detect 0.18 cm EDM notches, as measured from the rivet shank, with a 1.27 cm diameter probe and to detect flaws buried under the rivet head, down to a length of 0.076 cm, using a 0.32 cm diameter probe. The Self-Nulling Electromagnetic Flaw Detector induces a high density eddy current ring in the sample under test. A ferromagnetic flux focusing lens is incorporated such that in the absence of any inhomogeneities in the material under test only a minimal magnetic field will reach the interior of the probe. A magnetometer (pickup coil) located in the center of the probe therefore registers a null voltage in the absence of material defects. When a fatigue crack or other discontinuity is present in the test article the path of the eddy currents in the material is changed. The magnetic field associated with these eddy currents then enter into the interior of the probe, producing a large output voltage across the pickup coil leads. Further

Self-reported characteristics of women and men with intimate body piercings.

Science.gov (United States)

Caliendo, Carol; Armstrong, Myrna L; Roberts, Alden E

2005-03-01

The purpose of this paper is to report the findings of a study exploring factors associated with female and male intimate body piercing, with particular emphasis on health issues. Nipple and genital piercings (intimate piercings) have become common types of body art. Scant medical and nursing literature is available, leading to little understanding of these body modifications by health care providers. A convenience sample of intimately pierced individuals (63 women and 83 men) from 29 states in the United States of America was surveyed via an author-developed questionnaire. Questions focused on demographic characteristics, decision factors and health problems related to intimate piercings. Self-reported characteristics were compared between female and male participants, and participants were compared demographically to United States general population. Participants reported wearing nipple piercings (43%), genital piercings (25%) and both types (32%). Respondents were significantly younger, less ethnically diverse, better educated, less likely to be married, more often homosexual or bisexual and they initiated sexual activity at a younger age than the US population. Deliberate, individual decisions for procurement of the intimate piercings were made. Average purchase consideration was at age 25 (nipple) and 27 (genital); average age to obtain the piercing was 27 (nipple) and 28 (genital) years. Purposes for obtaining the piercings included uniqueness, self-expression and sexual expression. Most participants still liked their piercing (73-90%). Health concerns related to intimate piercings were described by both those with nipple piercings (66%) and with genital piercings (52%) and included site sensitivity, skin irritation, infection and change in urinary flow (male genital). Few STDs (3%) were reported and no HIV or hepatitis. Usually non-medical advice was sought for problems -- often from the body piercer. Understanding client rationale is not a necessary

Body piercing, tattooing, self-esteem, and body investment in adolescent girls.

Science.gov (United States)

Carroll, Lynne; Anderson, Roxanne

2002-01-01

Postmodern perspectives of body piercing and tattooing interpret these as signifiers of the self and attempts to attain mastery and control over the body in an age of increasing alienation. In this exploratory study, 79 adolescent females, ages 15 to 18 (M = 16.08, SD = 1.36), completed the Coopersmith Self-Esteem Inventory (SEI; Coopersmith, 1981), the Beck Depression Inventory (BDI; Beck, 1978), the Body Investment Scale (BIS; Orbach & Mikulincer, 1998), and the State-Trait Anger Expression Inventory (STAXI-2; Spielberger, 1996). Analyses revealed that body piercings and tattoos were significantly correlated with trait anger (Angry Reaction subscale scores). A multiple regression analysis indicated that three of the dependent variables (Trait Anger-Reaction, BDI, and Feeling subscale of the BIS) were predictors of the total number of body piercings and tattoos.

Experimental characterization and numerical simulation of riveted lap-shear joints using Rivet Element

Science.gov (United States)

Vivio, Francesco; Fanelli, Pierluigi; Ferracci, Michele

2018-03-01

In aeronautical and automotive industries the use of rivets for applications requiring several joining points is now very common. In spite of a very simple shape, a riveted junction has many contact surfaces and stress concentrations that make the local stiffness very difficult to be calculated. To overcome this difficulty, commonly finite element models with very dense meshes are performed for single joint analysis because the accuracy is crucial for a correct structural analysis. Anyhow, when several riveted joints are present, the simulation becomes computationally too heavy and usually significant restrictions to joint modelling are introduced, sacrificing the accuracy of local stiffness evaluation. In this paper, we tested the accuracy of a rivet finite element presented in previous works by the authors. The structural behaviour of a lap joint specimen with a rivet joining is simulated numerically and compared to experimental measurements. The Rivet Element, based on a closed-form solution of a reference theoretical model of the rivet joint, simulates local and overall stiffness of the junction combining high accuracy with low degrees of freedom contribution. In this paper the Rivet Element performances are compared to that of a FE non-linear model of the rivet, built with solid elements and dense mesh, and to experimental data. The promising results reported allow to consider the Rivet Element able to simulate, with a great accuracy, actual structures with several rivet connections.

Self-esteem, propensity for sensation seeking, and risk behaviour among adults with tattoos and piercings.

Science.gov (United States)

Hong, Bo-Kyung; Lee, Hyo Young

2017-12-13

Background: In recent years, increasing numbers of adults and adolescents have opted to undergo tattoo and piercing procedures. Studies among adolescents with tattoo and piercing have usually explored the relationship between one factor and the decision to have tattoos and/or piercings. The aim of this study was to determine relationships between body cosmetic procedures and selfesteem, propensity for sensation seeking, and risk behaviours among adults. Materials and Methods: The subjects were divided into two groups, i.e. , those with (n=429) and those without tattoos/piercings (n=237), and self-esteem, propensity for sensation seeking, and risk behaviour were compared between the two groups using self-report questionnaires. To analyse differences in self-esteem and the propensity for sensation seeking, general characteristics were statistically adjusted. In addition, general characteristics, self-esteem, and propensity for sensation seeking were statistically adjusted to determine differences in the propensity for risk behaviour between the two groups. Results: Significant differences were observed in age, marital status, income level, occupation, values or sensitivity to fashion, and educational level between the group with and that without tattoos/ piercings. There was no significant difference in self-esteem, whereas there were significant differences in the propensity for sensation seeking and risk behaviour between the two groups. Conclusions: Continuous attention to, and interest in, the increased incidence of tattooing and piercing are necessary, especially in terms of public interventions for health education and health promotion, as these forms of self-adornment are associated with behaviours that pose a risk to health.

Self-esteem, propensity for sensation seeking, and risk behaviour among adults with tattoos and piercings

Directory of Open Access Journals (Sweden)

Bo-Kyung Hong

2017-12-01

Full Text Available Background: In recent years, increasing numbers of adults and adolescents have opted to undergo tattoo and piercing procedures. Studies among adolescents with tattoo and piercing have usually explored the relationship between one factor and the decision to have tattoos and/or piercings. The aim of this study was to determine relationships between body cosmetic procedures and selfesteem, propensity for sensation seeking, and risk behaviours among adults. Materials and Methods: The subjects were divided into two groups, i.e., those with (n=429 and those without tattoos/piercings (n=237, and self-esteem, propensity for sensation seeking, and risk behaviour were compared between the two groups using self-report questionnaires. To analyse differences in self-esteem and the propensity for sensation seeking, general characteristics were statistically adjusted. In addition, general characteristics, self-esteem, and propensity for sensation seeking were statistically adjusted to determine differences in the propensity for risk behaviour between the two groups. Results: Significant differences were observed in age, marital status, income level, occupation, values or sensitivity to fashion, and educational level between the group with and that without tattoos/ piercings. There was no significant difference in self-esteem, whereas there were significant differences in the propensity for sensation seeking and risk behaviour between the two groups. Conclusions: Continuous attention to, and interest in, the increased incidence of tattooing and piercing are necessary, especially in terms of public interventions for health education and health promotion, as these forms of self-adornment are associated with behaviours that pose a risk to health.

Satisfaction with life, self-esteem and evaluation of mental health in people with tattoos or piercings.

Science.gov (United States)

Pajor, Anna J; Broniarczyk-Dyła, Grażyna; Świtalska, Julita

2015-01-01

The aim of the study was to determine the level of life satisfaction and the various dimensions of self-esteem of pierced or tattooed people, and evaluate their mental health, compared to those without similar body modifications. The study was conducted on a sample of 449 people aged 16-58 years (mean age 26.7 ± 6.35), of whom 308 had body modifications: tattoo (n = 90), body piercings in places other than the ear lobe (n = 53), or both tattoos and piercings (n = 165). The control group consisted of 141 people without such modifications. The participants completed a questionnaire concerning their socio-demographic status, as well as the following psychological tests: The Satisfaction with Life Scale (SWLS), Multidimensional Self-Esteem Inventory (MSEI) and General Health Questionnaire (GHQ-28). Our findings show no significant differences in terms of life satisfaction between the group with tattoos or piercings and the control group. People with body modifications were characterized by higher self-esteem, with regard to their competence and leadership abilities. They also display fewer symptoms of social impairment and sleep disorders than the control group. Tattoos and piercings should not be considered as indicators of psychopathology.

Reliability-based fatigue life estimation of shear riveted connections considering dependency of rivet hole failures

Directory of Open Access Journals (Sweden)

Leonetti* Davide

2018-01-01

Full Text Available Standards and guidelines for the fatigue design of riveted connections make use of a stress range-endurance (S-N curve based on the net section stress range regardless of the number and the position of the rivets. Almost all tests on which S-N curves are based, are performed with a minimum number of rivets. However, the number of rivets in a row is expected to increase the fail-safe behaviour of the connection, whereas the number of rows is supposed to decrease the theoretical stress concentration at the critical locations, and hence these aspects are not considered in the S-N curves. This paper presents a numerical model predicting the fatigue life of riveted connections by performing a system reliability analysis on a double cover plated riveted butt joint. The connection is considered in three geometries, with different number of rivets in a row and different number of rows. The stress state in the connection is evaluated using a finite element model in which the friction coefficient and the clamping force in the rivets are considered in a deterministic manner. The probability of failure is evaluated for the main plate, and fatigue failure is assumed to be originating at the sides of the rivet holes, the critical locations, or hot-spots. The notch stress approach is applied to assess the fatigue life, considered to be a stochastic quantity. Unlike other system reliability models available in the literature, the evaluation of the probability of failure takes into account the stochastic dependence between the failures at each critical location modelled as a parallel system, which means considering the change of the state of stress in the connection when a ligament between two rivets fails. A sensitivity study is performed to evaluate the effect of the pretension in the rivet and the friction coefficient on the fatigue life.

Rivet usage at CMS

Energy Technology Data Exchange (ETDEWEB)

Radziej, Markus; Hebbeker, Thomas; Sonnenschein, Lars [III. Phys. Inst. A, RWTH Aachen (Germany)

2015-07-01

In this talk an overview of Rivet and its usage at the CMS experiment is presented. Rivet stands for ''Robust Independent Validation of Experiment and Theory'' and is used for optimizing and validating Monte Carlo event generators. By using the results of published analyses, distributions of the simulation can be compared to experimental measurements (corrected for detector effects). This gives insight into the agreement on the particle-level. Starting off with an introduction to the Rivet environment, the purpose of this tool in modern particle physics is explained. Before taking a closer look at the analysis structure, the software necessary to get comparisons is outlined. Analysis implementations are discussed using code examples, showcasing the powerful framework that Rivet provides. A few selected final distributions displaying both Monte Carlo generated events and recorded data are presented, showing the potential to perform particle-level comparisons.

Investigating the removal of body piercings.

Science.gov (United States)

Armstrong, Myrna L; Roberts, Alden E; Koch, Jerome R; Saunders, Jana C; Owen, Donna C

2007-05-01

Although body piercing procurement continues to increase, 13% to 18% of them are removed. Reasons for piercing removal in college students were examined with three groups: (a) those who kept all their piercings, (b) those who removed some, or (c) those who removed all of their body piercings. Of the sample, 41% were still pierced; 50% in their lifetime. Their major purpose for the body piercing was "helped them feel unique." Females obtained more (in high school) and then removed more, usually as upperclassmen. Males and females reported themselves as risk takers at procedure time and currently; however, only 10% cited deviancy as a reason for the body piercing(s). Only removal elements of "I just got tired of it" and "I just decided to remove it" were present, especially with the Some Removed Group. Further examination of body piercing building personal distinctiveness and self-identity to promote their need of uniqueness is suggested.

Development of all-beryllium riveted structures

International Nuclear Information System (INIS)

Floyd, D.R.; Leslie, W.W.; Miley, D.V.; Nokes, R.W.

1976-01-01

Results are presented of a development program aimed at making a full-scale, all-beryllium frustrum by riveted assembly methods. Included are descriptions of the sheet-metal fabrication practices and assembly plans. Results of extensive mechanical testing of both ingot- and powder-source beryllium products that are presented include tensile, notch-tensile, bearing, and shear tests. Although the full-size structure has not been built, examples are given of several conical and cylindrical structures that were made. The largest of these is a 20-in. diameter, 15-in. long cylinder that was roll-formed from one 0.050-in. thick ingot sheet and assembled with 60 countersunk rivets. Tensile testing of riveted flat coupons is also reported as is bulge testing of riveted cylindrical shells. A cost comparison of riveted deep-drawn and powder-source cylinders is made. Results show that when strength and dimensional tolerance requirements are not severe, a riveted assembly approach is warranted. 33 figures, 8 tables

On the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted Joints

Science.gov (United States)

Borba, Natascha Z.; Afonso, Conrado R. M.; Blaga, Lucian; dos Santos, Jorge F.; Canto, Leonardo B.; Amancio-Filho, Sergio T.

2017-01-01

In the current work, process-related thermo-mechanical changes in the rivet microstructure, joint local and global mechanical properties, and their correlation with the rivet plastic deformation regime were investigated for Ti-6Al-4V (rivet) and glass-fiber-reinforced polyester (GF-P) friction-riveted joints of a single polymeric base plate. Joints displaying similar quasi-static mechanical performance to conventional bolted joints were selected for detailed characterization. The mechanical performance was assessed on lap shear specimens, whereby the friction-riveted joints were connected with AA2198 gussets. Two levels of energy input were used, resulting in process temperatures varying from 460 ± 130 °C to 758 ± 56 °C and fast cooling rates (178 ± 15 °C/s, 59 ± 15 °C/s). A complex final microstructure was identified in the rivet. Whereas equiaxial α-grains with β-phase precipitated in their grain boundaries were identified in the rivet heat-affected zone, refined α′ martensite, Widmanstätten structures and β-fleck domains were present in the plastically deformed rivet volume. The transition from equiaxed to acicular structures resulted in an increase of up to 24% in microhardness in comparison to the base material. A study on the rivet material flow through microtexture of the α-Ti phase and β-fleck orientation revealed a strong effect of shear stress and forging which induced simple shear deformation. By combining advanced microstructural analysis techniques with local mechanical testing and temperature measurement, the nature of the complex rivet plastic deformational regime could be determined. PMID:28772545

On the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted Joints

Directory of Open Access Journals (Sweden)

Natascha Z. Borba

2017-02-01

Full Text Available In the current work, process-related thermo-mechanical changes in the rivet microstructure, joint local and global mechanical properties, and their correlation with the rivet plastic deformation regime were investigated for Ti-6Al-4V (rivet and glass-fiber-reinforced polyester (GF-P friction-riveted joints of a single polymeric base plate. Joints displaying similar quasi-static mechanical performance to conventional bolted joints were selected for detailed characterization. The mechanical performance was assessed on lap shear specimens, whereby the friction-riveted joints were connected with AA2198 gussets. Two levels of energy input were used, resulting in process temperatures varying from 460 ± 130 °C to 758 ± 56 °C and fast cooling rates (178 ± 15 °C/s, 59 ± 15 °C/s. A complex final microstructure was identified in the rivet. Whereas equiaxial α-grains with β-phase precipitated in their grain boundaries were identified in the rivet heat-affected zone, refined α′ martensite, Widmanstätten structures and β-fleck domains were present in the plastically deformed rivet volume. The transition from equiaxed to acicular structures resulted in an increase of up to 24% in microhardness in comparison to the base material. A study on the rivet material flow through microtexture of the α-Ti phase and β-fleck orientation revealed a strong effect of shear stress and forging which induced simple shear deformation. By combining advanced microstructural analysis techniques with local mechanical testing and temperature measurement, the nature of the complex rivet plastic deformational regime could be determined.

Orofacial piercings: perceptions of dental practitioners and piercing parlours.

Science.gov (United States)

Chadwick, Barbara L; Groves, Gemma; Dransfield, Kathryn

2005-07-01

To identify the advice given by piercing parlours prior to orofacial piercing and to determine how many dental practitioners see complications from orofacial piercings. Administered questionnaire to 19 piercing parlours and postal questionnaire to 400 dental practitioners in south-east Wales. Ninety-nine per cent of 227 dental practitioners in south-east Wales had treated patients with orofacial piercings, over three-quarters had seen a patient for a complication caused by the piercing, and over half (N=120) had treated a patient for a complication of piercing. Tongue (N=225) and lip (N=209) piercings were most frequently seen and the most commonly occurring complication was fractured or cracked teeth (N=176). Almost all practitioners wanted more information on orofacial piercing and its sequelae. All 19 piercing parlours in south-east Wales warned clients about pain following piercing and 18 mentioned swelling; only four discussed possible damage to teeth and none discussed the risk of airway obstruction. Despite the concerns of dental and medical professionals orofacial piercing remains popular and the complications it causes are frequently seen by dental practitioners. There is a need for literature to assist both dental practitioners and piercers in advising and safeguarding patients.

Oral and perioral piercings in Tshwane.

Science.gov (United States)

Ebrahim, R; Naidoo, S

2008-06-01

Oral and perioral piercings have recently become very popular and many patients present at dental clinics and practices with jewellery inserted into the oral and perioral tissues. It is imperative that oral health care professionals become familiar with this practice, become aware of its sequelae, and are able to provide oral health education regarding oral hygiene and care of the piercing. The present study investigated the sites of oral piercings, complications associated with piercings, plaque control procedures practised by piercees, and the attitude and behaviour of piercers towards infection control and prevention of complications after a piercing. A convenience sample was used and 126 piercees and 10 piercers completed a self-administered questionnaire. Of the 126 participants (107 females and 19 males), 88.10% had a tongue piercing, 19.84% had a lip piercing and 7.94% had both. The most common immediate post-procedure sequelae were pain (69.05%), swelling (52.38%) and difficulty eating, speaking and swallowing (70.63%). Long-term complications were reported by 17.56% of the sample, and included chipping of teeth, gingival recession, lesions on the tongue and palate, painful gums, and sensitivity of teeth. Oral health professionals need to be aware of the risk of damage to soft and hard tissue, and their role in informing patients about the potential risks, if consulted before a piercing.

Fabrication and characterization of SPR chips with the modified bovine serum albumin

Science.gov (United States)

Chen, Xing; Zhang, Lu-lu; Cui, Da-fu

2016-03-01

A facile surface plasmon resonance (SPR) chip is developed for small molecule determination and analysis. The SPR chip was prepared based on a self assembling principle, in which the modified bovine serum albumin (BSA) was directly self-assembled onto the bare gold surface. The surface morphology of the chip with the modified BSA was investigated by atomic force microscopy (AFM) and its optical properties were characterized. The surface binding capacity of the bare facile SPR chip with a uniform morphology is 8 times of that of the bare control SPR chip. Based on the experiments of immune reaction between cortisol antibody and cortisol derivative, the sensitivity of the facile SPR chip with the modified BSA is much higher than that of the control SPR chip with the un-modified BSA. The facile SPR chip has been successfully used to detect small molecules. The lowest detection limit is 5 ng/mL with a linear range of 5—100 ng/mL for cortisol analysis. The novel facile SPR chip can also be applied to detect other small molecules.

Development of all-beryllium riveted structures. [Frustrum; cylinders; cones

Energy Technology Data Exchange (ETDEWEB)

Floyd, D. R.; Leslie, W. W.; Miley, D. V.; Nokes, R. W.

1976-04-20

Results are presented of a development program aimed at making a full-scale, all-beryllium frustrum by riveted assembly methods. Included are descriptions of the sheet-metal fabrication practices and assembly plans. Results of extensive mechanical testing of both ingot- and powder-source beryllium products that are presented include tensile, notch-tensile, bearing, and shear tests. Although the full-size structure has not been built, examples are given of several conical and cylindrical structures that were made. The largest of these is a 20-in. diameter, 15-in. long cylinder that was roll-formed from one 0.050-in. thick ingot sheet and assembled with 60 countersunk rivets. Tensile testing of riveted flat coupons is also reported as is bulge testing of riveted cylindrical shells. A cost comparison of riveted deep-drawn and powder-source cylinders is made. Results show that when strength and dimensional tolerance requirements are not severe, a riveted assembly approach is warranted. 33 figures, 8 tables. (auth)

Caring for Rosie the Riveter's Children

Science.gov (United States)

MacKenzie, Bill

2011-01-01

During the Second World War, women in the United States who worked in the war industries in such jobs as welders, riveters, heavy machinery operators, and parachute riggers were heralded in the media as "Rosie the Riveter." From 1943 to 1945 a fortunate few of these workplace pioneers participated in a memorable experiment in child care at Kaiser…

Tattoos, piercing, and sexual behaviors in young adults.

Science.gov (United States)

Nowosielski, Krzysztof; Sipiński, Adam; Kuczerawy, Ilona; Kozłowska-Rup, Danuta; Skrzypulec-Plinta, Violetta

2012-09-01

Body piercing and tattooing are accepted by a growing number of teenagers and young adults as a way of self-expressing. Some authors suggest association between body piercings/tattoos and early sexual initiation, higher number of sexual partners, or risky sexual behaviors. The aim of the study was to evaluate sexual behaviors among young adults with body modifications (BMs)--tattoos and piercings. One hundred twenty young healthy adults, ages between 20 and 35, were included in the population study. The study group was divided into three subgroups: controls (N = 60), adults with tattoos (N = 28), and adults with piercings (N = 32). The research instrument was a self-prepared questionnaire containing 59 questions assessing socioepidemiological parameters, sexual behaviors, incidents of sexual harassment in the past, and self-attractiveness evaluation, as well as questions concerning tattoos and piercings. Socioepidemiological variables and sexual behaviors were compared between subgroups. To assess and describe the correlation between having BM--tattoos and piercing--and sexual behaviors in the population of young adults by using the logistic regression model. Adults with BMs have had their first intercourse statistically earlier and were more sexually active compared with controls. There were no statically significant differences in sexual orientation, sexual preferences, engaging in risky sexual behaviors, frequency of masturbation, and history of sexual abuse between the groups. In contrast, the frequency of sexual intercourses was statistically higher and oral sex was more likely to be a dominant sexual activity in adults with BM compared with controls. The multivariate logistic model revealed that adults with BM were four times less likely to participate in religious practices and twice more likely to have early sexual initiation. Having BM is associated with early sexual initiation and more liberal attitudes toward sexual behaviors but not with engaging in

Differential SPR immunosensing

NARCIS (Netherlands)

Berger, Charles E.H.; Berger, C.E.H.; Greve, Jan

2000-01-01

In this work we describe a surface plasmon resonance (SPR) sensor with a differential detection of the SPR angle, and demonstrate it. The angle of incidence is modulated by a simple piezo-electric actuator, and the reflectance signal is measured with a lockin-amplifier. When the conditions for SPR

Tattoos and Piercing

Science.gov (United States)

... Looking and feeling your best Tattoos and piercing Tattoos and piercing Some people think piercings and tattoos ... surgery if you want to close the hole. Tattoos top How about henna? You may have seen ...

Body Piercing

Science.gov (United States)

... another metal. You should shop around and check prices at different piercing salons before you decide on ... Rinse tongue or lip piercings after every meal, snack and before bed (4-5 times a day) ...

Metakognisjon om språk og språklæring i et flerspråklighetsperspektiv

Directory of Open Access Journals (Sweden)

Åsta Haukås

2014-09-01

Full Text Available I denne artikkelen drøfter jeg betydningen av elevers refleksjon om språk og språklæring. Artikkelens første del gir en kort introduksjon til forskningsfeltet metakognisjon. Deretter presenterer jeg to underkategorier av metakognisjon som er særlig relevante i språkundervisningen, metalingvistisk bevissthet og bevissthet om språklæringsstrategier. I artikkelens andre del introduserer jeg hovedprinsippene i flerspråklighetsdidaktikken, gir eksempler på hvordan elevene kan reflektere over språk og språklæring i språkfagene og argumenterer for at økt vekt på metakognisjon i og på tvers av språkfagene er en nøkkel til bedre språkkompetanse hos fremtidige elever. Dette krever imidlertid et sterkere samarbeid mellom språkfagene i skole, lærerutdanning og forskning.

Inhomogeneous deformation of aluminum alloy AA-2219 Rivet heads during manufacturing-A case study

International Nuclear Information System (INIS)

Ahmad, S.; Subhani, T.; Haq, A.U.

2006-01-01

AA -2219 aluminum alloy wire of diameter 4mm was used for the manufacturing of rivets used in aerospace industry. The problem arose as the heads of many of the rivets were inhomogenously deformed during manufacturing and were declared reject by the customer. Investigation was carried out to uncover the cause of the problem and to find its solution. Chemical analysis and mechanical testing were performed to ascertain the chemical composition and mechanical properties of the rivet wire. Metallographic examination was also carried out to study the macro and micro structural details. Metallographic and mechanical results were also compared with that of qualified rivets. It was revealed that the rivet wire was not annealed after wire drawing process- and was in hardened state, which gave rise to a non-uniform plastic flow during manufacturing. The presence of second phase coherent precipitates increased the hardness and tensile strength of rivet wire and was found to be the possible cause of inhomogenously deformed rivet heads; which was rectified by partial annealing the rivet wire at suitable temperature. (author)

Identification of Nonlinear Dynamic Behavior and Failure for Riveted Joint Assemblies

Directory of Open Access Journals (Sweden)

B. Langrand

2000-01-01

Full Text Available Many different types of rivets need to be modeled to analyze the crashworthiness of aircraft structures. A numerical procedure based on FE modeling and characterization of material failure constitutive models is proposed herein with the aim of limiting the costs of experimental procedures otherwise necessary to obtain these data. Quasi-static and dynamic experiments were carried out on elementary tension (punched and shear (riveted specimens. No strain rate sensitivity was detected in the failure behavior of the riveted joint assemblies. Experimental data were used to identify the Gurson damage parameters of each material (2024-T351 and 7050 aluminum alloys for the sheet metal plate and the rivet respectively by an inverse method. Characterization gave rise to satisfactory correlation between FE models and experiments. Optimized parameters were validated for each material by means of a uniaxial tension test for the sheet metal plate and an ARCAN type specimen in pure tension for the rivet.

Radiofrequency-assisted body piercing

Directory of Open Access Journals (Sweden)

Preethitha Babu

2017-01-01

Full Text Available The art of body piercing is ancient; however, nowadays it has evolved into a fashion statement. In the Indian subcontinent, ear and nose piercing hold religious and cultural significance in addition to being done for aesthetic reasons. Body piercing is routinely performed by railroading technique or by piercing guns; many modifications of the technique have emerged. Irrespective of the technique used, the main complications associated are intraoperative bleeding and postoperative infection. To overcome these problems, we describe a novel and simple technique of ear and nose piercing using the radio frequency cautery.

In vivo degradation of a new concept of magnesium-based rivet-screws in the minipig mandibular bone

Energy Technology Data Exchange (ETDEWEB)

Schaller, Benoit [Department of Cranio-Maxillofacial Surgery, Inselspital, Bern University Hospital and University of Bern, CH-3010 Bern (Switzerland); National Dental Centre Singapore, 168938 (Singapore); Saulacic, Nikola [Department of Cranio-Maxillofacial Surgery, Inselspital, Bern University Hospital and University of Bern, CH-3010 Bern (Switzerland); Beck, Stefan, E-mail: SBECK2@its.jnj.com [Synthes Biomaterials, Eimattstr. 3, CH-4436 Oberdorf (Switzerland); Imwinkelried, Thomas [RMS Foundation, Bischmattstr. 12, CH-2544 Bettlach (Switzerland); Goh, Bee Tin [National Dental Centre Singapore, 168938 (Singapore); Nakahara, Ken [Department of Cranio-Maxillofacial Surgery, Inselspital, Bern University Hospital and University of Bern, CH-3010 Bern (Switzerland); Hofstetter, Willy [Department of Clinical Research, University of Bern, CH-3010 Bern (Switzerland); Iizuka, Tateyuki [Department of Cranio-Maxillofacial Surgery, Inselspital, Bern University Hospital and University of Bern, CH-3010 Bern (Switzerland)

2016-12-01

Self-tapping of magnesium screws in hard bone may be a challenge due to the limited torsional strength of magnesium alloys in comparison with titanium. To avoid screw failure upon implantation, the new concept of a rivet-screw was applied to a WE43 magnesium alloy. Hollow cylinders with threads on the outside were expanded inside drill holes of minipig mandibles. During the expansion with a hexagonal mandrel, the threads engaged the surrounding bone and the inside of the screw transformed into a hexagonal screw drive to allow further screwing in or out of the implant. The in vivo degradation of the magnesium implants and the performance of the used coating were studied in a human standard-sized animal model. Four magnesium alloy rivet-screws were implanted in each mandible of 12 minipigs. Six animals received the plasmaelectrolytically coated magnesium alloy implants; another six received the uncoated magnesium alloy rivet-screws. Two further animals received one titanium rivet-screw each as control. In vivo radiologic examination was performed at one, four, and eight weeks. Euthanasia was performed for one group of seven animals (three animals with coated, three with uncoated magnesium alloy implants and one with titanium implant) at 12 weeks and for the remaining seven animals at 24 weeks. After euthanasia, micro-computed tomography and histological examination with histomorphometry were performed. Significantly less void formation as well as higher bone volume density (BV/TV) and bone-implant contact area (BIC) were measured around the coated implants compared to the uncoated ones. The surface coating was effective in delaying degradation despite plastic deformation. The results showed potential for further development of magnesium hollow coated screws for bone fixation. - Highlights: • A new concept of rivet screws as an alternative to classical screws is presented • The rivet screw concept was tested in vivo in a mini-pig pilot study • Un-coated and

In vivo degradation of a new concept of magnesium-based rivet-screws in the minipig mandibular bone

International Nuclear Information System (INIS)

Schaller, Benoit; Saulacic, Nikola; Beck, Stefan; Imwinkelried, Thomas; Goh, Bee Tin; Nakahara, Ken; Hofstetter, Willy; Iizuka, Tateyuki

2016-01-01

Self-tapping of magnesium screws in hard bone may be a challenge due to the limited torsional strength of magnesium alloys in comparison with titanium. To avoid screw failure upon implantation, the new concept of a rivet-screw was applied to a WE43 magnesium alloy. Hollow cylinders with threads on the outside were expanded inside drill holes of minipig mandibles. During the expansion with a hexagonal mandrel, the threads engaged the surrounding bone and the inside of the screw transformed into a hexagonal screw drive to allow further screwing in or out of the implant. The in vivo degradation of the magnesium implants and the performance of the used coating were studied in a human standard-sized animal model. Four magnesium alloy rivet-screws were implanted in each mandible of 12 minipigs. Six animals received the plasmaelectrolytically coated magnesium alloy implants; another six received the uncoated magnesium alloy rivet-screws. Two further animals received one titanium rivet-screw each as control. In vivo radiologic examination was performed at one, four, and eight weeks. Euthanasia was performed for one group of seven animals (three animals with coated, three with uncoated magnesium alloy implants and one with titanium implant) at 12 weeks and for the remaining seven animals at 24 weeks. After euthanasia, micro-computed tomography and histological examination with histomorphometry were performed. Significantly less void formation as well as higher bone volume density (BV/TV) and bone-implant contact area (BIC) were measured around the coated implants compared to the uncoated ones. The surface coating was effective in delaying degradation despite plastic deformation. The results showed potential for further development of magnesium hollow coated screws for bone fixation. - Highlights: • A new concept of rivet screws as an alternative to classical screws is presented • The rivet screw concept was tested in vivo in a mini-pig pilot study • Un-coated and

Trends and complications of ear piercing among selected Nigerian population

Directory of Open Access Journals (Sweden)

Olajide Toye Gabriel

2017-01-01

Full Text Available Background: The reported health and socioeconomic consequences of ear piercing, especially in modern day society, underscore the need to further research into this subject. In this study, we determine the trends and complications of ear piercing among selected Nigerian population. Aim and Objectives: The aim and objective of this study was to draw attention to the trends and complications of ear piercing with a view to prevent its associated complications. Methodology: It is a descriptive cross-sectional study carried out between February and May 2015 among selected Nigerian population from two of its six geo-political zones. A self-administered semi-structured questionnaire which had been pretested was used to collect data from 458 respondents who consented using multistage sampling technique. Results: Of 480 respondents enumerated, 458 completed the questionnaires and gave their biodata. The male:female ratio was 1:6.2. Their ages ranged from 18 to 75 years with a mean of 35.56 ± 10.16. About 35.4% of the respondents were within the age group of 31–40 years. Majority of the respondents, i.e.,79.3% practiced ear piercing on their children. Most of them (86.8% preferred single piercing. Ear piercing was performed within the 1st week of birth in 37.2% of the respondents. Large percentage (93.2% of the respondents will not encourage ear piercing in male children. Nearly 20.5% of the respondents observed complications. Conclusion: Ear piercing remained a common practice in Nigeria, with respondents preferring it on females. Majority of the piercings are done in childhood and by untrained personnel. Keloid formation was the notable complication observed by the respondents. There is a need to increase awareness about the hazards of ear piercings and to enact laws that regulate ear piercings particularly in children which is hereby stretched.

Tattoos and body piercings in the United States: a national data set.

Science.gov (United States)

Laumann, Anne E; Derick, Amy J

2006-09-01

Little is known about the prevalence and consequences of body art application. Our aim was to provide US tattooing and body piercing prevalence, societal distribution, and medical and social consequence data. Random digit dialing technology was used to obtain a national probability sample of 253 women and 247 men who were 18 to 50 years of age. Of our respondents, 24% had tattoos and 14% had body piercings. Tattooing was equally common in both sexes, but body piercing was more common among women. Other associations were a lack of religious affiliation, extended jail time, previous drinking, and recreational drug use. Local medical complications, including broken teeth, were present in one third of those with body piercings. The prevalence of jewelry allergy increased with the number of piercings. Of those with tattoos, 17% were considering removal but none had had a tattoo removed. This was a self-reported data set with a 33% response rate. Tattooing and body piercing are associated with risk-taking activities. Body piercing has a high incidence of medical complications.

Potentials of Industrie 4.0 and Machine Learning for Mechanical Joining

OpenAIRE

Jäckel, Mathias

2017-01-01

-Sensitivity analysis of the influence of component properties and joining parameters on the joining result for self-pierce riveting -Possibilities to link mechanical joining technologies with the automotive process chain for quality and flexibility improvements -Potential of using machine learning to reduce automotive product development cycles in relation to mechanical joining -Datamining for machine learning at mechanical joining

Remoção do piercing no perioperatório Remoción del piercing en el perioperatorio Perioperative removal of body piercing

Directory of Open Access Journals (Sweden)

Solange Diccini

2008-02-01

Full Text Available A permanência do piercing no intra-operatório pode ocasionar intercorrências. Este estudo teve como objetivo determinar as intervenções de enfermagem no pré-operatório e avaliar as complicações do piercing no intra-operatório. Durante a revisão da literatura, foram incluídos 16 artigos publicados de 1994 a 2006. Nove artigos (56,2% de intervenções de enfermagem no pré-operatório, quatro (25,0% de complicações do piercing no intra-operatório e três (18,8% sobre o uso do piercing no intra-operatório, não apresentando complicações. Concluímos que a presença de piercing oral durante o intra-operatório aumenta o risco de lesões e aspiração. No corpo, a presença do piercing pode causar lesões na pele, decorrentes da mobilização do paciente e queimaduras eletrocirúrgicas. Portanto, é necessária a retirada do piercing no pré-operatório.La permanencia del piercing en el intraoperatorio puede causar algún perjuicio. Pretendemos, determinar las intervenciones de enfermería en el preoperatorio y evaluar las complicaciones del piercing en el intraoperatorio. La revisión de la literatura mostró 16 artículos publicados de 1994 a 2006. Nueve (56,2% fueron de intervenciones de enfermería en el preoperatorio, cuatro (25,0% de complicaciones del piercing en intraoperatorio, tres (18,8% no mostraron complicaciones. Concluimos, la presencia del piercing oral, durante el intraoperatório aumenta el riesgo de aspiración y daño. En el cuerpo, puede causar heridas en la piel, provocadas por la movilización del enfermo y las quemaduras, debido al uso de bisturí eléctrico durante el acto intraoperatorio. Por consiguiente, es necesario retirar el piercing en el preoperatorio.The remaining of piercing in intraoperative can cause damages. This paper had as purpose defining the nursing interventions in the intraoperative and evaluates the complications caused by piercing in the intraoperative. This literature review had 16

Should physicians have facial piercings?

Science.gov (United States)

Newman, Alison W; Wright, Seth W; Wrenn, Keith D; Bernard, Aline

2005-03-01

The objective of this study was to assess attitudes of patrons and medical school faculty about physicians with nontraditional facial piercings. We also examined whether a piercing affected the perceived competency and trustworthiness of physicians. Survey. Teaching hospital in the southeastern United States. Emergency department patrons and medical school faculty physicians. First, patrons were shown photographs of models with a nontraditional piercing and asked about the appropriateness for a physician or medical student. In the second phase, patrons blinded to the purpose of the study were shown identical photographs of physician models with or without piercings and asked about competency and trustworthiness. The third phase was an assessment of attitudes of faculty regarding piercings. Nose and lip piercings were felt to be appropriate for a physician by 24% and 22% of patrons, respectively. Perceived competency and trustworthiness of models with these types of piercings were also negatively affected. An earring in a male was felt to be appropriate by 35% of patrons, but an earring on male models did not negatively affect perceived competency or trustworthiness. Nose and eyebrow piercings were felt to be appropriate by only 7% and 5% of faculty physicians and working with a physician or student with a nose or eyebrow piercing would bother 58% and 59% of faculty, respectively. An ear piercing in a male was felt to be appropriate by 20% of faculty, and 25% stated it would bother them to work with a male physician or student with an ear piercing. Many patrons and physicians feel that some types of nontraditional piercings are inappropriate attire for physicians, and some piercings negatively affect perceived competency and trustworthiness. Health care providers should understand that attire may affect a patient's opinion about their abilities and possibly erode confidence in them as a clinician.

Tatuajes y "piercing" Tattoos and piercing

Directory of Open Access Journals (Sweden)

L E Valle

2006-03-01

Full Text Available A pesar de estar en el siglo XXI se ha retomado el lenguaje con códigos de comunicación arcaicos. Los jóvenes forman su identidad mediante la interacción con sus pares y los tatuajes y "piercing" tienen sus propios códigos, que son interpretados por el grupo que los lleva. Actualmente los tatuajes y los "piercing" encuentran su lugar predominante en la población adolescente, donde se han reinstalado por ser "moda" y generalmente se aceptan por estar generalizados. Asimismo los observamos en poblaciones marginales: de drogadictos y carcelarias. Realizarse un tatuaje y/o "piercing" implica ciertos riesgos, entre los que podemos mencionar la transmisión de infecciones que pueden ser localizadas en las zonas del tatuaje y/o "piercing"; y/o generalizadas como las virósicas algunas de las cuales conllevan riesgos de salud como el virus del HIV, de las hepatitis A,B,C. Pueden observarse también reacciones alérgicas, de hipersensibilidad, liquenoides, granulomatosas y varias como cicatrices hipertróficas y queloides; asimismo desencadenar un primer episodio de psoriasis, lupus, etc. Dentro de las recomendaciones para informar a la población deberíamos incluir: que las regiones del cuerpo más riesgosas para la realización de los mismos (que debieran evitarse son aquellas que asientan en cabeza (incluyendo boca, nariz, cuello y órganos genitales. También es importante tener la vacunación antitetánica actualizada, considerar las condiciones de higiene del local donde se va a asistir y el tipo de material a utilizar, debiendo ser en lo posible material descartable. Los cuidados durante los primeros días post práctica son: mantener la zona limpia y seca, baños cortos, secarse sin frotado y no exponerse al sol por tres o cuatro meses. Asimismo es aconsejable ante cualquier reacción concurrir a la consulta profesional.In spite of being in the XXI century, several archaic codes of communication language have been restablished. Young

The hole picture: risks, decision making, purpose, regulations, and the future of body piercing.

Science.gov (United States)

Armstrong, Myrna L; Koch, Jerome R; Saunders, Jana C; Roberts, Alden E; Owen, Donna C

2007-01-01

Can it be said that body piercing is ubiquitous, found across all socioeconomic groups? The major concentration is among adolescents and young adults 15 to 30 years old, in some studies, 50% of the population. Commonly identified physical risks are bleeding, tissue trauma, and bacterial infections; psychosocial risks are unhappiness, low self-esteem, and disappointment. The Health Belief Model is used to explain decision making; purposes for body piercing consistently center on personal expression (self-identity) and uniqueness. The international and US body piercing regulations are discussed, leading to the need for tracking complications globally and standardization of regulations. Proactive health education for clients and health providers remains a priority.

Nano Sensing and Energy Conversion Using Surface Plasmon Resonance (SPR

Directory of Open Access Journals (Sweden)

Iltai (Isaac Kim

2015-07-01

Full Text Available Nanophotonic technique has been attracting much attention in applications of nano-bio-chemical sensing and energy conversion of solar energy harvesting and enhanced energy transfer. One approach for nano-bio-chemical sensing is surface plasmon resonance (SPR imaging, which can detect the material properties, such as density, ion concentration, temperature, and effective refractive index in high sensitivity, label-free, and real-time under ambient conditions. Recent study shows that SPR can successfully detect the concentration variation of nanofluids during evaporation-induced self-assembly process. Spoof surface plasmon resonance based on multilayer metallo-dielectric hyperbolic metamaterials demonstrate SPR dispersion control, which can be combined with SPR imaging, to characterize high refractive index materials because of its exotic optical properties. Furthermore, nano-biophotonics could enable innovative energy conversion such as the increase of absorption and emission efficiency and the perfect absorption. Localized SPR using metal nanoparticles show highly enhanced absorption in solar energy harvesting. Three-dimensional hyperbolic metamaterial cavity nanostructure shows enhanced spontaneous emission. Recently ultrathin film perfect absorber is demonstrated with the film thickness is as low as ~1/50th of the operating wavelength using epsilon-near-zero (ENZ phenomena at the wavelength close to SPR. It is expected to provide a breakthrough in sensing and energy conversion applications using the exotic optical properties based on the nanophotonic technique.

Body piercing with fatal consequences.

Science.gov (United States)

Ranga, N; Jeffery, A J

2011-01-25

Body modifications such as piercings, tattoos and surgery have increased in popularity in recent times and have become more socially acceptable. The common complications of piercing different parts of the human anatomy are well-documented, including sepsis, allergic reactions and, more rarely, endocarditis and ischaemia. Deaths related to piercing complications are primarily septic in origin. In this case, a man in his 50s died due to complications of his multiple umbilical piercings. The cause of death was unusually linked to body modification; the umbilical piercings had ultimately led to a mesenteric infarction. Cases such as these are forensically important due to potential manslaughter charges that could be brought against a piercing establishment. More importantly, this case highlights another extreme complication of body modification. Fashion statements are always changing and impact upon many lives. It is important to highlight to people the potentially life-threatening complications of common piercing practices.

Body piercing with fatal consequences

Science.gov (United States)

Ranga, N; Jeffery, A J

2011-01-01

Body modifications such as piercings, tattoos and surgery have increased in popularity in recent times and have become more socially acceptable. The common complications of piercing different parts of the human anatomy are well-documented, including sepsis, allergic reactions and, more rarely, endocarditis and ischaemia. Deaths related to piercing complications are primarily septic in origin. In this case, a man in his 50s died due to complications of his multiple umbilical piercings. The cause of death was unusually linked to body modification; the umbilical piercings had ultimately led to a mesenteric infarction. Cases such as these are forensically important due to potential manslaughter charges that could be brought against a piercing establishment. More importantly, this case highlights another extreme complication of body modification. Fashion statements are always changing and impact upon many lives. It is important to highlight to people the potentially life-threatening complications of common piercing practices. PMID:22715261

Piercing and Tattoos

Science.gov (United States)

Piercings and tattoos are body decorations that go back to ancient times. Body piercing involves making a hole in the skin ... can be in other parts of the body. Tattoos are designs on the skin made with needles ...

Pierce Patriarch "Prince of Quacks"

Data.gov (United States)

Department of the Interior — This article provides brief biographies for Dr. Valentine Mott Pierce and his father, Dr. Ray Vaughn Pierce. Dr. R.V. Pierce has been described as the “uberquack,”...

Assessment of the RIVET fixation system for cranioplasty using the pull-out technique.

Science.gov (United States)

Sakamoto, Yoshiaki; Minabe, Toshiharu; Kato, Tatsuya; Kishi, Kazuo

2015-03-01

Cranioplasty using custom-made hydroxyapatite (HAP) ceramic implants is a common procedure to repair skull defects. However, commercially available titanium screws are only minimally stabilized due to characteristic brittleness. We developed the RIVET technique which involves fixing a bioabsorbable plate atop a HAP block using bioabsorbable screws extending beyond both layers, and evaluated fixation strength using the pull-out test and microtomography. Three experimental conditions were compared: a non-RIVET group, RIVET group, and dry skull control group. Pull-out strength significantly differed across groups (non-RIVET group, 1.33 ± 1.21 kgf; RIVET group, 4.46 ± 0.84 kgf; and control group, 6.99 ± 1.14 kgf, P uses commercially available absorbable plate and screws, and thus can be used widely in clinical applications involving HAP blocks with different porosities and thicknesses. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

What Is an Oral Piercing?

Science.gov (United States)

... to your desktop! more... What Is an Oral Piercing? Article Chapters What Is an Oral Piercing? print full article print this chapter email this article Oral piercing can cause pain, swelling, infection, drooling, taste loss, ...

Methods for Evaluating the Performance and Human Stress-Factors of Percussive Riveting

Science.gov (United States)

Ahn, Jonathan Y.

The aerospace industry automates portions of their manufacturing and assembly processes. However, mechanics still remain vital to production, especially in areas where automated machines cannot fit, or have yet to match the quality of human craftsmanship. One such task is percussive riveting. Because percussive riveting is associated with a high risk of injury, these tool must be certified prior to release. The major contribution of this thesis is to develop a test bench capable of percussive riveting for ergonomic evaluation purposes. The major issues investigated are: (i) automate the tool evaluation method to be repeatable; (ii) demonstrate use of displacement and force sensors; and (iii) correlate performance and risk exposure of percussive tools. A test bench equipped with servomotors and pneumatic cylinders to control xyz-position of a rivet gun and bucking bar simultaneously, is used to explore this evaluation approach.

Genital male piercings

Directory of Open Access Journals (Sweden)

Mircea Tampa

2015-04-01

Full Text Available Body piercing has been practiced for thousands of years all over the world for beautification, religion, initiation rites or status reasons. Genital piercings also have a significant background and have been practiced for enhancing sexual pleasure, chastity, shocking or as a protest against a conservative society. As the popularity of genital piercings increased in the last years, the number of complications is also on the rise. It is therefore important for the medical professionals to have at least basic knowledge regarding this practice, as it might be required in the management of unpredictable complications.

Caring for Surgical Patients With Piercings.

Science.gov (United States)

Smith, Francis Duval

2016-06-01

Body piercing, a type of body modification that is practiced in many cultures, creates an unnatural tract through tissue that is then held open by artificial means. Today, professional body piercing is often performed in piercing establishments that are subject to dissimilar forms of regulation. The most frequently reported medical complication of body piercing and similar body modifications, such as dermal implantation, is infection. Patients with piercings who undergo surgery may have additional risks for infection, electrical burns, trauma, or airway obstruction. The published research literature on piercing prevalence, complications, regulations, education, and nursing care is outdated. The purpose of this article is to educate nurses on topics related to nursing care for patients with piercings and similar body modifications, including the history, prevalence, motivations for, and perceptions of body piercings as well as possible complications, devices used, locations, healing times, regulations, patient education, and other health concerns. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Tattoos, piercings, and alcohol consumption.

Science.gov (United States)

Guéguen, Nicolas

2012-07-01

Previous studies have found a link between body tattoos or piercings and risky behavior. However, these studies only examined survey data but not real behavior. Young men (mean = 20.6 years) and women (mean = 20.2 years) leaving a bar were asked whether they wore tattoos and piercings or not and were requested to breathe into a breathalyzer in order to evaluate their alcohol consumption. It was found that participants with piercings and/or tattoos as well as combined piercings and tattoos revealed higher levels of alcohol consumption. Piercings and tattoos could serve as signs of alcohol consumption for educators, parents, and physicians. Copyright © 2012 by the Research Society on Alcoholism.

Algunas consideraciones acerca de los piercings orales Some considerations about oral piercings

OpenAIRE

I De Urbiola Alís; H Viñals Iglesias

2005-01-01

Desde la antigüedad se han venido realizando piercings intraorales con motivaciones muy diversas a lo largo de la historia. Actualmente es una moda que se ha generalizado en el mundo occidental. En este artículo se explican los distintos tipos de piercings intra y periorales, sus posibles localizaciones y las complicaciones derivadas de su uso. También se dan unas recomendaciones y unas pautas de tratamiento para los profesionales que deban atender a los pacientes portadores de piercings.Intr...

Developments in SPR Fragment Screening.

Science.gov (United States)

Chavanieu, Alain; Pugnière, Martine

2016-01-01

Fragment-based approaches have played an increasing role alongside high-throughput screening in drug discovery for 15 years. The label-free biosensor technology based on surface plasmon resonance (SPR) is now sensitive and informative enough to serve during primary screens and validation steps. In this review, the authors discuss the role of SPR in fragment screening. After a brief description of the underlying principles of the technique and main device developments, they evaluate the advantages and adaptations of SPR for fragment-based drug discovery. SPR can also be applied to challenging targets such as membrane receptors and enzymes. The high-level of immobilization of the protein target and its stability are key points for a relevant screening that can be optimized using oriented immobilized proteins and regenerable sensors. Furthermore, to decrease the rate of false negatives, a selectivity test may be performed in parallel on the main target bearing the binding site mutated or blocked with a low-off-rate ligand. Fragment-based drug design, integrated in a rational workflow led by SPR, will thus have a predominant role for the next wave of drug discovery which could be greatly enhanced by new improvements in SPR devices.

Functional Conducting Polymers in the Application of SPR Biosensors

Directory of Open Access Journals (Sweden)

Rapiphun Janmanee

2012-01-01

Full Text Available In recent years, conducting polymers have emerged as one of the most promising transducers for both chemical, sensors and biosensors owing to their unique electrical, electrochemical and optical properties that can be used to convert chemical information or biointeractions into electrical or optical signals, which can easily be detected by modern techniques. Different approaches to the application of conducting polymers in chemo- or biosensing applications have been extensively studied. In order to enhance the application of conducting polymers into the area of biosensors, one approach is to introduce functional groups, including carboxylic acid, amine, sulfonate, or thiol groups, into the conducting polymer chain and to form a so-called “self-doped” or by doping with negatively charged polyelectrolytes. The functional conducting polymers have been successfully utilized to immobilize enzymes for construction of biosensors. Recently, the combination of SPR and electrochemical, known as electrochemical-surface plasmon resonance (EC-SPR, spectroscopy, has been used for in situ investigation of optical and electrical properties of conducting polymer films. Moreover, EC-SPR spectroscopy has been applied for monitoring the interaction between biomolecules and electropolymerized conjugated polymer films in biosensor and immunosensor applications. In this paper, recent development and applications on EC-SPR in biosensors will be reviewed.

Tattoo, piercing, and adolescent tobacco consumption.

Science.gov (United States)

Guéguen, Nicolas

2013-01-01

Abstract The objective of the study was to evaluate the link between tattoos and/or piercings and young people's tobacco consumption. A total of 2587 students (1168 females and 1419 males) were asked about tattoos, piercings, and tobacco consumption. Young men and young girls who had tattoos and/or wore piercings were more likely to report smoking behavior, earlier smoking behavior, and higher cigarette consumption per day. It was also found that both with men and women, the combined effects of piercings and tattoos were associated with an increase in smoking behavior. Piercings and/or tattoos as well as combined piercings and tattoos appeared as markers of tobacco consumption. Such marks could serve as signs for educators, parents, and physicians.

Tattoos and piercings: bodily expressions of uniqueness?

Science.gov (United States)

Tiggemann, Marika; Hopkins, Louise A

2011-06-01

The study aimed to investigate the motivations underlying the body modification practices of tattooing and piercing. There were 80 participants recruited from an Australian music store, who provided descriptions of their tattoos and piercings and completed measures of need for uniqueness, appearance investment and distinctive appearance investment. It was found that tattooed individuals scored significantly higher on need for uniqueness than non-tattooed individuals. Further, individuals with conventional ear piercings scored significantly lower on need for uniqueness than individuals with no piercings or with facial and body piercings. Neither appearance investment nor distinctive appearance investment differed significantly among tattoo or piercing status groups. Strength of identification with music was significantly correlated with number of tattoos, but not number of piercings. It was concluded that tattooing, but not body piercing, represents a bodily expression of uniqueness. Copyright © 2011 Elsevier Ltd. All rights reserved.

Awareness of complications and maintenance mode of oral piercing in a group of adolescents and young Italian adults with intraoral piercing

Science.gov (United States)

Fusco, Francesca; Corridore, Denise; Ottolenghi, Livia

2015-01-01

Background The aim of the study was to focus the awareness of complications of oral piercing among a group of adolescents and young Italian adults with intraoral piercings. Material and Methods A total of 225 teenagers were asked to complete a questionnaire on the awareness of complications of oral piercing. An additional questionnaire was administered in case of oral piercing worn, based on site piercing, knowledge about piercer license, oral and systemic risks due to oral piercing, disinfection and sterilization of the material pierced, information by the piercer about piercing hygiene maintenance and post-piercing dentist check-up. After questionnaire all partecipants received a brochure with some information about risks and maintenance mode of piercing. Results Data revealed that more than 50% of teens surveyed was found to wear a piercing. Only 25.3% was aware of the risk of HCV cross-infection and only 17.3% reported of knowledge about risk of endocarditis. Only 17% checked the piercer license and only 18% sterilization and disinfection of the materials used. 53.7% did not received explanations about the risks associated with piercing. With regard to the maintenance mode of the piercing, it has been suggested to brush the piercing bar in 17% of cases. The post piercing specialist visits have been suggested only in 7% of cases. Conclusions The general lack of awareness of complications and maintenance mode related to oral piercing needs to be addressed by some education programs performed at school and by dentists. Key words: Oral piercing, oral health, oral complications. PMID:25858082

[Genital piercings: epidemiology, sociocultural aspects, sexuality and complications].

Science.gov (United States)

Kluger, Nicolas

2012-01-01

Body piercing has gained tremendous popularity since the mid nineties. Genital piercings constitute a peculiar variant of piercing due to its sensitive localization. Health care providers are often very little informed about those piercings. Besides, negative stereotypes are often attributed to the bearers of such piercings. This review focuses not only on the medical aspects of genital piercings but also on the social, cultural and psychological background that surround those piercings. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

[Piercings--what the physician needs to know?].

Science.gov (United States)

Kluger, Nicolas; Koljonen, Virve

2012-01-01

Body piercing (BP) is defined as penetration of jewellery through the skin. Along with tattooing BPs are the most common body modifications. Complications related to piercing are numerous. They can be acute or chronic, infectious or non infectious and local or systemic complications. Acute infections constitute the most important complications and occur independently of the piercing site. Special attention should be brought on oral piercings, as they are frequent and responsible for numerous complications. A non-judgmental approach is recommended, when a pierced patient seeks medical help for a piercing complication or any other health issue.

Do long-term tongue piercings affect speech quality?

Science.gov (United States)

Heinen, Esther; Birkholz, Peter; Willmes, Klaus; Neuschaefer-Rube, Christiane

2017-10-01

To explore possible effects of tongue piercing on perceived speech quality. Using a quasi-experimental design, we analyzed the effect of tongue piercing on speech in a perception experiment. Samples of spontaneous speech and read speech were recorded from 20 long-term pierced and 20 non-pierced individuals (10 males, 10 females each). The individuals having a tongue piercing were recorded with attached and removed piercing. The audio samples were blindly rated by 26 female and 20 male laypersons and by 5 female speech-language pathologists with regard to perceived speech quality along 5 dimensions: speech clarity, speech rate, prosody, rhythm and fluency. We found no statistically significant differences for any of the speech quality dimensions between the pierced and non-pierced individuals, neither for the read nor for the spontaneous speech. In addition, neither length nor position of piercing had a significant effect on speech quality. The removal of tongue piercings had no effects on speech performance either. Rating differences between laypersons and speech-language pathologists were not dependent on the presence of a tongue piercing. People are able to perfectly adapt their articulation to long-term tongue piercings such that their speech quality is not perceptually affected.

With Nipple Piercing

Directory of Open Access Journals (Sweden)

Mark D. Pearlman

1995-01-01

Full Text Available Background: Breast abscesses are typically seen in the setting of complicated mastitis in lactating women. Abscesses resulting from foreign bodies are not commonly seen in the breast. Over the past few decades, body piercing has become increasingly common, yet the infectious morbidity resulting from it is not well recognized. A breast abscess associated with nipple piercing is described in this report.

Perceptions of visible piercings: a pilot study.

Science.gov (United States)

Martino, Sara; Lester, David

2011-12-01

49 undergraduates were shown pictures of a man and a woman with piercings and with no piercings. The pierced model was judged to be less attractive and less normal than the nonpierced model. The pierced model was perceived as less intelligent, caring, generous, honest, and religious but more artistic and mysterious.

46 CFR 126.160 - Tests and inspections during repairs or alterations, or during riveting, welding, burning, or...

Science.gov (United States)

2010-10-01

... during riveting, welding, burning, or other hot work. 126.160 Section 126.160 Shipping COAST GUARD... § 126.160 Tests and inspections during repairs or alterations, or during riveting, welding, burning, or... riveting, welding, burning, or other hot work may commence. (c) Each examination must be conducted as...

Is chronic nipple piercing associated with hyperprolactinemia?

Science.gov (United States)

Sun, Grace E Ching; Pantalone, Kevin M; Gupta, Manjula; Kennedy, Laurence; Nasr, Christian; Constantiner, Marigel; Hamrahian, Amir H; Hatipoglu, Betul

2013-09-01

Literature on hyperprolactinemia in the setting of a nipple piercing is limited to individuals with concomitant breast/chest wall infection. It is unclear if chronic nipple stimulation from a piercing alone can cause sustained elevations of serum prolactin. Nipple piercing is emerging as a more mainstream societal form of body art, and the answer to this clinical question would potentially alter patient management. Our aim was to assess serum prolactin levels in subjects with nipple piercing. Inclusion criteria were as follows: men and women ≥ 18 years old with nipple piercing(s) present > 6 months. Exclusion criteria included: women who are pregnant, lactating or men and eight women were enrolled. Median (range) ages for men and women were 33 (24-42) and 27 years (23-42), respectively. All except one subject had bilateral piercings. The median interval from nipple piercing to blood draw was 4.0 (2.0-12.0) years. None of the subjects had hyperprolactinemia. Median (range) prolactin levels for men and women were 5.6 ng/mL (3.8-7.4) and 8.0 ng/mL (2.8-10.9), respectively. Our results suggest that in the absence of any concomitant infection, chronic nipple piercing is not associated with hyperprolactinemia.

Genital piercings: diagnostic and therapeutic implications for urologists.

Science.gov (United States)

Nelius, Thomas; Armstrong, Myrna L; Rinard, Katherine; Young, Cathy; Hogan, LaMicha; Angel, Elayne

2011-11-01

To provide quantitative and qualitative data that will assist evidence-based decision making for men and women with genital piercings (GP) when they present to urologists in ambulatory clinics or office settings. Currently many persons with GP seek nonmedical advice. A comprehensive 35-year (1975-2010) longitudinal electronic literature search (MEDLINE, EMBASE, CINAHL, OVID) was conducted for all relevant articles discussing GP. Authors of general body art literature tended to project many GP complications with potential statements of concern, drawing in overall piercings problems; then the information was further replicated. Few studies regarding GP clinical implications were located and more GP assumptions were noted. Only 17 cases, over 17 years, describe specific complications in the peer-reviewed literature, mainly from international sources (75%), and mostly with "Prince Albert" piercings (65%). Three cross-sectional studies provided further self-reported data. Persons with GP still remain a hidden variable so no baseline figures assess the overall GP picture, but this review did gather more evidence about GP wearers and should stimulate further research, rather than collectively projecting general body piercing information onto those with GP. With an increase in GP, urologists need to know the specific differences, medical implications, significant short- and long-term health risks, and patients concerns to treat and counsel patients in a culturally sensitive manner. Targeted educational strategies should be developed. Considering the amount of body modification, including GP, better legislation for public safety is overdue. Copyright © 2011 Elsevier Inc. All rights reserved.

Genital piercings: what is known and what people with genital piercings tell us.

Science.gov (United States)

Armstrong, Myrna L; Caliendo, Carol; Roberts, Alden E

2006-06-01

General and subjective information about those who chose to obtain genital piercings was presented. Particularly, the assumptions made from the literature are refuted by objective and subjective data collected from intimately pierced individuals themselves. Professional nurses must not base practice decisions on assumptions but on the "best evidence with clinical experience, research, (as well as) associated patient values" (Sackett, Strauss, Richardson, Rosenberg, & Haynes, 2001, p. 10). Thus, providing clinically competent care is driven by the latest knowledge and evidence from research and patient sources. Data found here provide further empirical evidence that may help to improve client outcomes by advancing evidence-based nursing practice in relation to people with genital piercings.

Determination of crack size around rivet hole through neural network using ultrasonic Lamb wave

International Nuclear Information System (INIS)

Choi, Sang Woo; Lee, Joon Hyun

1998-01-01

Rivets are typical structural features that are potential initiation sites for fatigue crack due to combination of local stress concentration around rivet hole and moisture trapping. For the viewpoint of structural assurance, it is crucial to evaluate the size of crack around rivets by appropriate nondestructive techniques. Guided waves, which direct wave energy along the plate, carry information about the material in their path and offer a potentially more efficient tool for nondestructive inspection of structural material. Neural network that is considered to be the most suitable for pattern recognition and has been used by researchers in NDE field to classify different types of flaws and flaw size. In this study, crack size determination around rivet through a neural network based on the back-propagation algorithm has been done by extracting some feature from time-domain waveforms of ultrasonic Lamb wave for Al 2024-T3 skin panel of aircraft. Special attention was paid to reduce the coupling effect between transducer and specimen by extracting some features related to only time component data in ultrasonic waveform. It was demonstrated clearly that features extraction based on time component data of the time-domain waveform of Lamb wave was very useful to determine crack size initiated from rivet hole through neural network.

Piercing and Tattoos - Multiple Languages

Science.gov (United States)

... Are Here: Home → Multiple Languages → All Health Topics → Piercing and Tattoos URL of this page: https://medlineplus. ... V W XYZ List of All Topics All Piercing and Tattoos - Multiple Languages To use the sharing ...

Body piercing: complications and prevention of health risks.

Science.gov (United States)

Holbrook, Jaimee; Minocha, Julia; Laumann, Anne

2012-02-01

Body and earlobe piercing are common practices in the USA today. Minor complications including infection and bleeding occur frequently and, although rare, major complications have been reported. Healthcare professionals should be cognizant of the medical consequences of body piercing. Complications vary depending on the body-piercing site, materials used, experience of the practitioner, hygiene regimens, and aftercare by the recipient. Localized infections are common. Systemic infections such as viral hepatitis and toxic shock syndrome and distant infections such as endocarditis and brain abscesses have been reported. Other general complications include allergic contact dermatitis (e.g. from nickel or latex), bleeding, scarring and keloid formation, nerve damage, and interference with medical procedures such as intubation and blood/organ donation. Site-specific complications have been reported. Oral piercings may lead to difficulty speaking and eating, excessive salivation, and dental problems. Oral and nasal piercings may be aspirated or become embedded, requiring surgical removal. Piercing tracts in the ear, nipple, and navel are prone to tearing. Galactorrhea may be caused by stimulation from a nipple piercing. Genital piercings may lead to infertility secondary to infection, and obstruction of the urethra secondary to scar formation. In men, priapism and fistula formation may occur. Women who are pregnant or breastfeeding and have a piercing or are considering obtaining one need to be aware of the rare complications that may affect them or their child. Though not a 'complication' per se, many studies have reported body piercing as a marker for high-risk behavior, psychopathologic symptoms, and anti-social personality traits. When it comes to piercing complications, prevention is the key. Body piercers should take a complete medical and social history to identify conditions that may predispose an individual to complications, and candidates should choose a

Oral piercings among first-year university students.

Science.gov (United States)

Ventä, Irja; Lakoma, Ani; Haahtela, Sauli; Peltola, Jaakko; Ylipaavalniemi, Pekka; Turtola, Lauri

2005-05-01

The aim of the study was to examine oral piercings among first-year university students. First-year university students in 2002 were invited to a dental examination (n = 234; 49 men and 185 women). Students with piercings formed the study group and the rest served as controls. The methods included decayed, missing, and filled teeth (DMF) index, stimulated salivary flow rates, panoramic tomograms, and questionnaires including the Depression Inventory of Beck. Fisher's 2-sided exact test was used for statistical analysis. The prevalence of oral piercings was 3.4%. In the DMF indices, no statistically significant differences existed between the groups. Increased salivary flow rates were noted among students with piercings (63% vs 26%, P piercings is essential.

Oral piercings: immediate and late complications.

Science.gov (United States)

Vieira, Elma P; Ribeiro, Andre Luis Ribeiro; Pinheiro, João de Jesus V; Alves, Sérgio de M

2011-12-01

Oral piercings have a long history as part of religious, cultural, or sexual symbolism in many traditional tribes; currently, these ornaments have wide acceptance among young people. Several oral and systemic complications may be associated with this practice; however, limited data related to these complications can be obtained in the literature. This study includes 42 cases of oral piercings in 39 young adults, who were using or had used oral piercings, and the complications associated with their use. Immediate complications occurred in 29 cases, including excessive bleeding (69%) and pain (52.3%) as the most representative. Two cases of syncope were found. Late complications related to the piercing insertion site were observed in 97.6% of cases, with pain and swelling being present in 92.9% and 61.9% of cases, respectively. Dental pain and lacerations on the tongue represented the most prevalent complications associated with the surrounding tissues, accounting for 33.3% and 31% of cases. The use of oral piercings is related to a series of mainly local complications, and individuals who decide to use piercings should be aware of such complications. Individuals wishing to get a part of their body pierced should do so with qualified professionals and should regularly visit the dentist so that a regular control is achieved, thus ensuring the early detection of the adverse effects associated with this practice. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Sprækket kalks kompaktionsegenskaber

DEFF Research Database (Denmark)

Krogsbøll, Anette; Havmøller, Ole

2000-01-01

I mange geologiske og geotekniske sammenhænge bliver de relevante materialeparametre bestemt på små prøver i laboratoriet. Resultaterne bliver efterfølgende brugt til at analysere problemer i langt større skala. For sprækket kalk giver dette særlige problemer, fordi sprækkerne yderst sjældent er ...

Intimate body piercings in women

NARCIS (Netherlands)

van der Meer, G. T.; Schultz, W. C. M. Weijmar; Nijman, J. M.

2008-01-01

The popularity of (intimate) body piercing has increased as well as the chances of being confronted with (the complications) of it. This article provides information about the various types of intimate body piercings in women, the complications and concerns regarding the treatment of patients with

Pierce electrodes for a multigap accelerating system

International Nuclear Information System (INIS)

Davydenko, V.I.; Ivanov, A.A.; Kotelnikov, I.A.; Tiunov, M.A.

2007-01-01

A well-known Pierce's solution that allows to focus a beam of charged particles using properly shaped electrodes outside the beam is generalized to the case of multigap accelerating system. Simple parametric formulae for Pierce electrodes are derived for an accelerating system with current density, limited either by space charge or by emitting property of the cathode. As an example of general approach, Pierce electrodes shape is analyzed for a system with two accelerating gaps. It is shown that precise Pierce's solution exists if acceleration rate within second gap is lower than within first gap. In the opposite case quasi-Pierce solution can be implemented using non-equipotential electrode between the gaps, and guidelines, based on numerical simulations, for the design of equipotential focusing electrodes are given

Pericondrite pós-piercing Post-piercing perichondritis

Directory of Open Access Journals (Sweden)

André de Paula Fernandez

2008-12-01

Full Text Available O uso de piercing tem se tornado uma prática muito freqüente entre os jovens. O procedimento na maioria vezes realizado por profissionais não-qualificados não é isento de riscos. O manuseio de material contaminado ou a higiene imprópria predispõem à pericondrite e à celulite. A pericondrite caracteriza-se pelo eritema do pavilhão auricular, dor intensa e febre. Sem tratamento, desenvolve-se um edema generalizado do pavilhão com formação de abscesso subpericondrial, podendo evoluir para necrose isquêmica da cartilagem e a temível deformidade estética conhecida como "orelha em couve flor". O agente responsável mais encontrado é o Pseudomonas aeruginosa. No estágio inicial da doença o tratamento pode ser feito com antibióticos de amplo espectro. Nos casos em que o abscesso está presente, a incisão e drenagem cirúrgica são obrigatórios acompanhado de antibioticoterapia guiado pela cultura e antibiograma. OBJETIVO: O objetivo deste relato de caso é realizar uma revisão bibliográfica dos últimos 10 anos abordando os aspectos anatômicos do pavilhão auricular, a história do uso de piercing e suas mais conhecidas complicações. MÉTODO: Relato de um caso de pericondrite pós-piercing transcartilaginoso onde houve a necessidade de tratamento cirúrgico com praticamente nenhuma deformidade estética. RESULTADO: Aquisição de experiência teórico-prática através de revisão bibliográfica e relato de um caso de evolução favorável para a paciente. CONCLUSÃO: Incidência crescente das complicações de pericondrites na população jovem deve levar à prevenção primária mais elaborada.Piercing has become more and more popular among adolescents. The procedure is generally performed by unqualified professionals and carries its risk. Non-sterilized material or inappropiate hygiene increases the possibility of perichondritis and celulitis. The disease is characterized by erythema of the auricula pinna, unbearable pain

Intimate body piercings in women.

Science.gov (United States)

van der Meer, G T; Schultz, W C M Weijmar; Nijman, J M

2008-12-01

The popularity of (intimate) body piercing has increased as well as the chances of being confronted with (the complications) of it. This article provides information about the various types of intimate body piercings in women, the complications and concerns regarding the treatment of patients with intimate bodypiercings.

Diagrammer hos Pierce og Deleuze

DEFF Research Database (Denmark)

Busk, Malene

2006-01-01

Artiklen omhandler to forskellige begreber om diagrammet, nemlig Pierces og Deleuzes. De definerer udfra to meget forskellige udgangspukter begge diagrammet som kreativt redskab......Artiklen omhandler to forskellige begreber om diagrammet, nemlig Pierces og Deleuzes. De definerer udfra to meget forskellige udgangspukter begge diagrammet som kreativt redskab...

Nondestructive evaluation algorithm of fatigue cracks and far-side corrosion around a rivet fastener in multi-layered structures

Energy Technology Data Exchange (ETDEWEB)

Le, Min Hhuy; Kim, Jung Min [Research Center for IT-based Real Time NDT for Nano-Damage Tolerance, Chosun University, Gwangju (Korea, Republic of); Kim, Sejin; Wang, Dabin [Dept. of Control and Instrumentation Engineering, Graduate School, Chosun University, Gwangju (Korea, Republic of); Hwang, Young Ha [Avionics System Technology Center, KITECH, Youngcheon (Korea, Republic of)

2016-09-15

This research proposes a nondestructive inspection system for inspecting and localizing corrosion and fatigue cracks around rivets in air-intake structures. The system uses 64 InSb Hall sensor elements arrayed at a high spatial interval of 0.52 mm. Rivet detection and damage detection algorithms will be proposed. Analysis of the receiver operating characteristic curve and Probability of detection (POD) will be carried out to evaluate the performance of the system and detection algorithms. Artificial corrosion around a rivet with a minimum volume of 11.02 mm{sup 3} could be detected with 90/95% POD and artificial fatigue crack with minimum length of 2.95 mm from rivet body.

Post-piercing perichondritis.

Science.gov (United States)

Fernandez, André de Paula; Castro Neto, Ivan de; Anias, Christiane Ribeiro; Pinto, Patrícia Ciminelli Linhares; Castro, Jair de Carvalho E; Carpes, Arturo Frick

2008-01-01

Piercing has become more and more popular among adolescents. The procedure is generally performed by unqualified professionals and carries its risk. Non-sterilized material or inappropiate hygiene increases the possibility of perichondritis and celulitis. The disease is characterized by erythema of the auricula pinna, unbearable pain and fever. Left untreated, the condition progresses with edema along the auricula and abscess formation that may result in ischemic necrosis and a cauliflower anesthetic deformation. The most common bacteria is Pseudomonas aeruginosa. In cases with abscesses, drainage is necessary along with antibiotic therapy guided by cultures and antibiogram. The aim of this case report was to review the past 10 years of published papers dealing with anatomical aspects of the auricular pinna, the history of piercing and its most common complications. A case report of perichondritis after 'high' ear piercing that required surgical treatment and that progressed with no esthetic loss. Theoretical and practical experience based on a review and a report of a case that progressed satisfactorily. The increased incidence of perichondritis in adolescents should require more elaborated primary prevention measures.

[Tattoos and piercings in adolescents: family conflicts and temperament].

Science.gov (United States)

Bosello, Romina; Favaro, Angela; Zanetti, Tatiana; Soave, Manuela; Vidotto, Giulio; Huon, Gail; Santonastaso, Paolo

2010-01-01

The phenomenon of body art, such as tattoos and piercings, has ancient roots, rediscovered in Western society during the '70s. The aim of this research is to investigate the prevalence and the characteristics of tattoos and piercings among Italian adolescents of high school in Padua, with particular attention to family context and temperament. Some questionnaires about the presence or the wish of tattoos/piercings, smoke and alcohol use, familiar conflicts, and some temperamental features, such as novelty seeking, harm avoidance and reward dependence, have been administered to a sample of 829 students. Tattoo and piercing's prevalence among adolescents was respectively 4% and 24%; 2.5% of the sample had both. Respectively 62% and 35% of the subjects expressed the desire of having a tattoo or piercing. A significant association has been found between tattoo/piercing's presence and smoke and alcohol use (p tattoos and piercings, are more likely to have familiar conflicts and minor perceived support and they have higher scores on the novelty seeking scale. Those who wish a tattoo/piercing showed higher reward dependence. This study confirms that tattoos/piercings are common among young people and it stresses the relevance of familiar and temperamental features, and the association between tattoos/piercings and some maladaptive behaviors, like smoke and alcohol use.

Rebitagem por fricção ("FricRiveting". Desenvolvimento de uma nova técnica de união para juntas híbridas do tipo polímero-metal. Parte II: propriedades térmicas e mecânicas Friction riveting (FricRiveting. Development of a new joining technique for polymer-metal hybrid joints. Parte II: thermal and mechanical properties

Directory of Open Access Journals (Sweden)

Sergio T. Amancio-Filho

2011-12-01

Full Text Available Este artigo tem como objetivo complementar a primeira parte do estudo já publicado (Parte I, ilustrando a viabilidade da técnica FricRiveting, através da análise da temperatura processual (via termometria e termografia e desempenho mecânico (via ensaios de tração, cisalhamento e microdureza de juntas produzidas a partir de polieterimida (PEI com rebites de alumínio 2024-T351. Os resultados deste estudo mostram que a máxima temperatura de processo é próxima da temperatura de fusão do rebite de alumínio e temperatura de transformações térmicas do PEI (300ºC a 500ºC; altas temperaturas de processamento e altas taxas de deformação, implicam em excelente performance de ancoramento do rebite; e consequentemente, ótimas propriedades mecânica das juntas. Essas evidências, reforçam o grande potencial de aplicação do FricRiveting como nova técnica de união e fabricação de juntas de termoplásticos avançados e ligas leves.This present manuscript complements the work presented in the firs part of the study (Part I tackling the feasibility of the Friction Riveting (FricRiveting. This paper reports on the thermal history (the process temperature evaluated by thermometry and infrared thermography and mechanical performance (tensile strength, lap shear strength and microhardness of polyetherimide (PEI / aluminium 2024-T351 joints. The results showed average process temperatures within 300ºC to 500ºC. These are values close to the melting temperature of the aluminium rivet and the thermal degradation range of PEI. The high temperatures and shear rate induce the formation of the deformed tip of the rivet (anchoring zone responsible for the high anchoring efficiency of the rivet, and consequently, excellent mechanical properties of joints. The FricRiveting was demonstrated to be well adequate to hybrid engineering thermoplastic and lightweight alloy joints.

[Piercings. A new demand for nursing].

Science.gov (United States)

Lastra Félix, Marcos

2004-03-01

The new legal regulations and agreements dealing with the type of locales and personnel authorized to implant body rings through pierced holes known popularly as piercings brings with it the need for nurses to learn about this practice and to adapt our habitual sanitary techniques, in an urgent manner, in order to cover the increasing aesthetic demand. The nursing profession needs to amplify its range of treatments for this piercing practice so it is not limited to merely inserting rings or studs in holes.

Dental and oral complications of lip and tongue piercings.

Science.gov (United States)

De Moor, R J G; De Witte, A M J C; Delmé, K I M; De Bruyne, M A A; Hommez, G M G; Goyvaerts, D

2005-10-22

Piercing of the tongue and perioral regions is an increasingly popular expression of body art, with more patients coming in for a routine check-up with tongue and/or lip piercings. Several complications of oral piercing have been reported, some of which are life-threatening. In the present clinical survey the prevalence of both tongue and lip piercing complications in oral health was assessed in a group of 50 patients. The most common dental problem registered was chipping of the teeth, especially in association with tongue piercing. Gingival recession was seen as a result of lip piercing with studs. Post-procedural complications included oedema, haemorrhage and infection. Therefore, dentists and oral and maxillofacial surgeons should be given more authority to advise patients with oral and facial piercings or those who plan to acquire this type of body art.

Finite Element Analysis for Fatigue Damage Reduction in Metallic Riveted Bridges Using Pre-Stressed CFRP Plates

Directory of Open Access Journals (Sweden)

Elyas Ghafoori

2014-04-01

Full Text Available Many old riveted steel bridges remain operational and require retrofit to accommodate ever increasing demands. Complicating retrofit efforts, riveted steel bridges are often considered historical structures where structural modifications that affect the original construction are to be avoided. The presence of rivets along with preservation requirements often prevent the use of traditional retrofit methods, such as bonding of fiber reinforced composites, or the addition of supplementary steel elements. In this paper, an un-bonded post-tensioning retrofit method is numerically investigated using existing railway riveted bridge geometry in Switzerland. The finite element (FE model consists of a global dynamic model for the whole bridge and a more refined sub-model for a riveted joint. The FE model results include dynamic effects from axle loads and are compared with field measurements. Pre-stressed un-bonded carbon fiber reinforced plastic (CFRP plates will be considered for the strengthening elements. Fatigue critical regions of the bridge are identified, and the effects of the un-bonded post-tensioning method with different pre-stress levels on fatigue susceptibility are explored. With an applied 40% CFRP pre-stress, fatigue damage reductions of more than 87% and 85% are achieved at the longitudinal-to-cross beam connections and cross-beam bottom flanges, respectively.

Body adornment: piercings and tattoos.

Science.gov (United States)

Chivers, Lesley

Body adornment through tattoos and piercings is on the increase, making adverse side effects more common. Practitioners should be prepared to give advice, either before the event, or post-procedure in written and oral forms. The aim of this article is to inform practitioners of the sites and types of piercings, likely adverse side effects and estimated healing times.

Revised theory of Pierce-type electron guns

International Nuclear Information System (INIS)

Sar-El, H.Z.

1982-01-01

Attempts to date to obtain the shape of the beam forming electrodes of various Pierce-type electron guns are briefly discussed with emphasis on the many discrepansis in the results of previous works. A revised theory of Pierce-type electron guns is proposed. The shapes of the beam-forming electrodes for all known configurations of Pierce guns were computed on the basis of the proposed theory. (orig.)

A robust multi-frequency mixing algorithm for suppression of rivet signal in GMR inspection of riveted structures

Science.gov (United States)

Safdernejad, Morteza S.; Karpenko, Oleksii; Ye, Chaofeng; Udpa, Lalita; Udpa, Satish

2016-02-01

The advent of Giant Magneto-Resistive (GMR) technology permits development of novel highly sensitive array probes for Eddy Current (EC) inspection of multi-layer riveted structures. Multi-frequency GMR measurements with different EC pene-tration depths show promise for detection of bottom layer notches at fastener sites. However, the distortion of the induced magnetic field due to flaws is dominated by the strong fastener signal, which makes defect detection and classification a challenging prob-lem. This issue is more pronounced for ferromagnetic fasteners that concentrate most of the magnetic flux. In the present work, a novel multi-frequency mixing algorithm is proposed to suppress rivet signal response and enhance defect detection capability of the GMR array probe. The algorithm is baseline-free and does not require any assumptions about the sample geometry being inspected. Fastener signal suppression is based upon the random sample consensus (RANSAC) method, which iteratively estimates parameters of a mathematical model from a set of observed data with outliers. Bottom layer defects at fastener site are simulated as EDM notches of different length. Performance of the proposed multi-frequency mixing approach is evaluated on finite element data and experimental GMR measurements obtained with unidirectional planar current excitation. Initial results are promising demonstrating the feasibility of the approach.

[Cutaneous adverse reactions to tattoos and piercings].

Science.gov (United States)

Mataix, J; Silvestre, J F

2009-10-01

Piercings and tattoos have become very popular in western society in recent decades, particularly among younger generations. Reports of medical complications associated with these decorative techniques have increased in parallel with the rise in their popularity. Due to their high frequency, adverse cutaneous reactions are particularly important among these potential complications. Tattoo-related complications include a number of cutaneous and systemic infections secondary to breach of the epidermal barrier, acute and delayed inflammatory reactions with different histopathological patterns, the appearance of benign and malignant tumors on tattooed areas of skin, and certain dermatoses triggered by isomorphic phenomena. Piercing-related complications are similar, though some, such as pyogenic skin infections, are much more common due to the delayed wound healing after piercing in certain sites. We must differentiate between complications that are independent of the site of piercing, and specific complications, which are closely related to the body area pierced. The rate of complications after performing piercings or tattoos depends on the experience of the artist, the hygiene techniques applied, and the postprocedural care by the customer. However, some of these complications are unpredictable and depend on factors intrinsic to the patient. In this article, we review the most common decorative techniques of body art, with particular focus on the potential cutaneous complications and their management.

Fragment screening by SPR and advanced application to GPCRs.

Science.gov (United States)

Shepherd, Claire A; Hopkins, Andrew L; Navratilova, Iva

2014-01-01

Surface plasmon resonance (SPR) is one of the primary biophysical methods for the screening of low molecular weight 'fragment' libraries, due to its low protein consumption and 'label-free' methodology. SPR biosensor interaction analysis is employed to both screen and confirm the binding of compounds in fragment screening experiments, as it provides accurate information on the affinity and kinetics of molecular interactions. The most advanced application of the use of SPR for fragment screening is against membrane protein drug targets, such G-protein coupled receptors (GPCRs). Biophysical GPCR assays using SPR have been validated with pharmacological measurements approximate to cell-based methods, yet provide the advantage of biophysical methods in their ability to measure the weak affinities of low molecular weight fragments. A number of SPR fragment screens against GPCRs have now been disclosed in the literature. SPR fragment screening is proving versatile to screen both thermostabilised GPCRs and solubilised wild type receptors. In this chapter, we discuss the state-of-the-art in GPCR fragment screening by SPR and the technical considerations in performing such experiments. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

INFORMATION FOR USERS OF NUTS, BOLTS, SCREWS, NAILS AND RIVETS (SCEM GROUP 47)

CERN Multimedia

Logistics Group

2002-01-01

We should like to remind users that, since the closure of the self-service stores, nuts, bolts, screws, nails and rivets (Group 47 of the Stores Catalogue) can be obtained, in smaller packages than via EDH, from the 'Emergency Counter' in the Central Stores (Building 73, R-002) upon presentation of a duly completed hard-copy Materials Request form. The 'Emergency Counter' is open Mondays to Fridays from 7.30 a.m. to 11.50 a.m. and from 1.00 p.m. to 4.20 p.m. Information concerning the available packages can be found under the appropriate SCEM reference number in the Stores Catalogue. Logistics Group SPL Division

Walks on SPR neighborhoods.

Science.gov (United States)

Caceres, Alan Joseph J; Castillo, Juan; Lee, Jinnie; St John, Katherine

2013-01-01

A nearest-neighbor-interchange (NNI)-walk is a sequence of unrooted phylogenetic trees, T1, T2, . . . , T(k) where each consecutive pair of trees differs by a single NNI move. We give tight bounds on the length of the shortest NNI-walks that visit all trees in a subtree-prune-and-regraft (SPR) neighborhood of a given tree. For any unrooted, binary tree, T, on n leaves, the shortest walk takes Θ(n²) additional steps more than the number of trees in the SPR neighborhood. This answers Bryant’s Second Combinatorial Challenge from the Phylogenetics Challenges List, the Isaac Newton Institute, 2011, and the Penny Ante Problem List, 2009.

Friction riveting as an alternative mechanical fastening to join engineering plastics

Science.gov (United States)

Gagliardi, Francesco; Conte, Romina; Bentrovato, Renato; Simeoli, Giorgio; Russo, Pietro; Ambrogio, Giuseppina

2018-05-01

Friction Rivecting is a quite new joining process to connect multi-material structures. In brief, a metallic rivet is dipped rotating inside matrixes, usually made of plastics, increasing its original diameter. The use of high-performance plastics is more suitable being their higher mechanical and thermal properties important to avoid material degradation and to allow strong part connections. High-speed friction welding system has been usually used to perform the process. In the work here proposed, the joints have been achieved by means of a traditional milling machine and the attention has been focused on a widely used engineering plastic, i.e. polyamide 6 (PA6) with and without glass fiber reinforcement. A specific speed multiplier has been attached into the mandrel of the used machine to increase the reachable rotational speed. Moreover, rivets made of Titanium Grade 2 and of an Aluminum Alloy, the AA-6060, are utilized. The influence that the heating and the forging length can have on the quality of the obtained junctions, considering a fixed joining depth, has been tested and investigated. The performed connections have been judged by tensile tests, which were set to quantify the maximum strength of the joints for a transverse speed of 1,0 mm/min. Barreling effect can be observed close to the tip, which loses the initial shape of a cylinder characterized by straight vertical walls. Finally, the possible degradation of the polymer, due to temperature increment, has been also evaluated close to the working zone. According to that, it has to be highlighted that the process needs a heating balance, which is necessary to get sound joints. The compromise has, on one side, to allow the rivet penetration and deformation, and on the other side, to avoid the degradation of the polymer, which would affect its properties and a proper rivet deformation.

Management of Retained Genital Piercings: A Case Report and Review

Directory of Open Access Journals (Sweden)

Laura J. Moulton

2017-01-01

Full Text Available The prevalence of genital piercing among women is increasing. As the popularity increases, the number of complications from infection, injury, and retained jewelry is likely to rise. Techniques to remove embedded jewelry are not well described in the literature. The purpose of this report was to describe a case of a patient with a retained clitoral glans piercing, discuss a simple technique for outpatient removal, and review current evidence regarding associated risks of clitoral piercings. A 24-year-old female presented to the emergency department with an embedded clitoral glans piercing. Local anesthetic was injected into the periclitoral skin and a small superficial vertical incision was made to remove the ball of the retained barbell safely. In conclusion, among patients with retained genital piercing, outpatient removal of embedded jewelry is feasible. While the practice of female genital piercing is not regulated, piercing of the glans of the clitoris is associated with increased injury to the nerves and blood supply of the clitoris structures leading to future fibrosis and diminished function compared to piercing of the clitoral hood.

Management of Retained Genital Piercings: A Case Report and Review.

Science.gov (United States)

Moulton, Laura J; Jernigan, Amelia M

2017-01-01

The prevalence of genital piercing among women is increasing. As the popularity increases, the number of complications from infection, injury, and retained jewelry is likely to rise. Techniques to remove embedded jewelry are not well described in the literature. The purpose of this report was to describe a case of a patient with a retained clitoral glans piercing, discuss a simple technique for outpatient removal, and review current evidence regarding associated risks of clitoral piercings. A 24-year-old female presented to the emergency department with an embedded clitoral glans piercing. Local anesthetic was injected into the periclitoral skin and a small superficial vertical incision was made to remove the ball of the retained barbell safely. In conclusion, among patients with retained genital piercing, outpatient removal of embedded jewelry is feasible. While the practice of female genital piercing is not regulated, piercing of the glans of the clitoris is associated with increased injury to the nerves and blood supply of the clitoris structures leading to future fibrosis and diminished function compared to piercing of the clitoral hood.

Piercing by composite electrode tool

International Nuclear Information System (INIS)

Abdukarimov, Eh.T.; Krakov, B.G.; Saidinov, S.Ya.

1990-01-01

The construction of the electrode consisting of a dielectric shell, where a working liquid enters, and a metal rod is designed for precision super-deep piercing by the electroerosion treatment method. Technological parameters of piercing with small diameter (0.5-1.9 mm) for 12Kh18N10T steel, copper and tungsten are presented. A possibility to use a new tool for treating components of any form and sizes is marked

Drawing Euler Diagrams with Circles: The Theory of Piercings.

Science.gov (United States)

Stapleton, Gem; Leishi Zhang; Howse, John; Rodgers, Peter

2011-07-01

Euler diagrams are effective tools for visualizing set intersections. They have a large number of application areas ranging from statistical data analysis to software engineering. However, the automated generation of Euler diagrams has never been easy: given an abstract description of a required Euler diagram, it is computationally expensive to generate the diagram. Moreover, the generated diagrams represent sets by polygons, sometimes with quite irregular shapes that make the diagrams less comprehensible. In this paper, we address these two issues by developing the theory of piercings, where we define single piercing curves and double piercing curves. We prove that if a diagram can be built inductively by successively adding piercing curves under certain constraints, then it can be drawn with circles, which are more esthetically pleasing than arbitrary polygons. The theory of piercings is developed at the abstract level. In addition, we present a Java implementation that, given an inductively pierced abstract description, generates an Euler diagram consisting only of circles within polynomial time.

Selling the SPR [Strategic Petroleum Reserve

International Nuclear Information System (INIS)

Gurney, J.

1997-01-01

The Strategic Petroleum Reserve (SPR) in the USA was created in 1975, in conjunction with the wider reserve programme of the International Energy Agency, following the 1973/74 Arab oil embargo. The only source of funding for the SPR has been annual appropriations bills from Congress. In 1994, however, Congress, seeking ways to balance the nation's budget and given the perception by many free market economists that the danger of serious oils supply disruption has passed, refused to allocate funds for SPR oil purchases. No crude oil stocks have been added to the reserve since then. In 1996, congress took the further step of requiring sales of oil from the reserve in order to pay for the programme's running costs and to meet the costs of maintaining the reserve's storage facilities. The reserve oil is stored in caverns under salt domes in the coastal regions of the Gulf of Mexico and some of these are beginning to fracture to the extent that they are having to be decommissioned. The SPR has been investigating ways of raising money in order to lessen its dependence on Congress. These include leasing pipelines and a marine terminal, and allowing the storage of foreign owned oil in underused caverns. (author)

Intraurethral condylomata acuminata associated with genital piercings.

Science.gov (United States)

Takahashi, S; Hirano, Y; Kawamura, T; Homma, Y

2013-01-01

A 33-year-old man was referred to our institution with papillary masses at the urethral meatus and difficulty urinating. Genital examination showed two piercings on the frenulum, which were penetrating the external urethra. Endoscopic examination revealed papillary tumours over the entire circumference of the penile urethra and the piercing site. The tumours were resected transurethrally. Microscopic examination revealed condylomata acuminata. Human papillomavirus types 6 and 66 were detected in the lesions. Retrograde urethral viral infection is rare because of the protection provided by the mucosal immune system. Genital piercing may have facilitated spread of the human papillomavirus into the urethra.

Pierce instability and bifurcating equilibria

International Nuclear Information System (INIS)

Godfrey, B.B.

1981-01-01

The report investigates the connection between equilibrium bifurcations and occurrence of the Pierce instability. Electrons flowing from one ground plane to a second through an ion background possess a countable infinity of static equilibria, of which only one is uniform and force-free. Degeneracy of the uniform and simplest non-uniform equilibria at a certain ground plan separation marks the onset of the Pierce instability, based on a newly derived dispersion relation appropriate to all the equilibria. For large ground plane separations the uniform equilibrium is unstable and the non-uniform equilibrium is stable, the reverse of their stability properties at small separations. Onset of the Pierce instability at the first bifurcation of equilibria persists in more complicated geometries, providing a general criterion for marginal stability. It seems probable that bifurcation analysis can be a useful tool in the overall study of stable beam generation in diodes and transport in finite cavities

Piercings in medical students and their effects on the skin.

Science.gov (United States)

Purim, Kátia Sheylla Malta; Rosario, Bernardo Augusto; Rosario, Cristine Secco; Guimarães, Ana Tereza Bittencourt

2014-01-01

Piercings are body embellishments commonly seen in young people, however their inherent risk of infection and scarring disorders are less divulged. To evaluate the prevalence of body piercings among medical students and their possible dermatologic consequences. Cross-sectional study with 58 medical students, by means of a structured questionnaire covering socio-demographic characteristics, technical issues related to the piercing and characteristics of the dermatologic complications. The sample was predominantly female (86.2%), with mean age 24 ± 3 years. The placement of the first piercing occurred during adolescence (median age 15), without medical supervision (91.4%) or knowledge of parents/guardians (74%). Most piercings were made of metal alloy/stainless steel, in a dumbbell model (51.7%), inserted in the umbilical area (53.5%) or ear (41.4%), with frequent cutaneous reactions in the first six months post-piercing. Hypertrophic scarring, pain, swelling and infection (ppiercings. Piercing insertion occurred during adolescence. Local inflammatory and infectious reactions were common. Scarring disorders and dermatitis appeared in the long term. There is need for preventive and educational activities, starting with those in the academic environment.

Mechanical joining of materials with limited ductility: Analysis of process-induced defects

Science.gov (United States)

Jäckel, M.; Coppieters, S.; Hofmann, M.; Vandermeiren, N.; Landgrebe, D.; Debruyne, D.; Wallmersberger, T.; Faes, K.

2017-10-01

The paper shows experimental and numerical analyses of the clinching process of 6xxx series aluminum sheets in T6 condition and the self-pierce riveting process of an aluminum die casting. In the experimental investigations the damage behavior of the materials when using different tool parameters is analyzed. The focus of the numerical investigations is the damage prediction by a comparison of different damage criteria. Moreover, strength-and fatigue tests were carried out to investigate the influence of the joining process-induced damages on the strength properties of the joints.

Pierce Lumber, Inc.

Science.gov (United States)

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

Molecular self assembly of mixed comb-like dextran surfactant polymers for SPR virus detection.

Science.gov (United States)

Mai-Ngam, Katanchalee; Kiatpathomchai, Wansika; Arunrut, Narong; Sansatsadeekul, Jitlada

2014-11-04

The synthesis of two comb-like dextran surfactant polymers, that are different in their dextran molecular weight (MW) distribution and the presence of carboxylic groups, and their characterization are reported. A bimodal carboxylic dextran surfactant polymer consists of poly(vinyl amine) (PVAm) backbone with carboxyl higher MW dextran, non-functionalized lower MW dextran and hydrophobic hexyl branches; while a monomodal dextran surfactant polymer is PVAm grafted with non-functionalized lower MW dextran and hexyl branches. Layer formation of non-covalently attached dextran chains with bimodal MW distributions on a surface plasmon resonance (SPR) chip was investigated from the perspective of mixed physisorption of the bimodal and monomodal surfactant polymers. Separation distances between the carboxylic longer dextran side chains within the bimodal surfactant polymer and between the whole bimodal surfactant molecules on the chip surface could be well-controlled. SPR analysis of shrimp yellow head virus using our mixed surfactant chips showed dependence on synergetic adjustment of these separation distances. Copyright © 2014 Elsevier Ltd. All rights reserved.

Proximity to citrus influences Pierce's disease in Temecula Valley vineyards

OpenAIRE

Perring, Thomas M.; Farrar, Charles A.; Blua, Matthew

2001-01-01

Pierce's disease has caused extensive losses to grapes in the Temecula Valley. The primary vector of Pierce's disease in the region is the glassy-winged sharpshooter (GWSS), which has been found in large numbers in citrus trees. We examined the role of citrus in the Temecula Valley Pierce's disease epidemic and found that citrus groves have influenced the incidence and severity of Pierce's disease in grapes. Because GWSS inhabit citrus in large numbers, California grape growers should take ad...

Religious belief and practice in attitudes toward individuals with body piercing.

Science.gov (United States)

Koch, Jerome R; Roberts, Alden E; Armstrong, Myrna L; Owen, Donna C

2004-10-01

Some research suggests adorning the body with tattoos or piercing jewelry is normative. Survey data were gathered from 450 undergraduates (72% female; 80% Euro-American; 63% freshmen and sophomores). Correlations between an index of respondents' religious belief and practice and their attitudes toward individuals who had more body piercings were weak if piercings were 7 or more, including piercings of the nipples and genitals. As religiosity is a carrier of normative behavior, individuals who have body piercings may be viewed as behaving within cultural norms.

Tattoos and body piercings as indicators of adolescent risk-taking behaviors.

Science.gov (United States)

Carroll, Sean T; Riffenburgh, Robert H; Roberts, Timothy A; Myhre, Elizabeth B

2002-06-01

This study assessed tattoos and body piercings as markers of risk-taking behaviors in adolescents. A 58-question survey, based on the 1997 Centers for Disease Control and Prevention Youth Risk Behavior Survey, was offered to all adolescent beneficiaries that came to the Adolescent Clinic. The survey contained standard Youth Risk Behavior Survey questions that inquire about eating behavior, violence, drug abuse, sexual behavior, and suicide. Questions about tattoos and body piercings were added for the purposes of this study. Participants with tattoos and/or body piercings were more likely to have engaged in risk-taking behaviors and at greater degrees of involvement than those without either. These included disordered eating behavior, gateway drug use, hard drug use, sexual activity, and suicide. Violence was associated with males having tattoos and with females having body piercings. Gateway drug use was associated with younger age of both tattooing and body piercing. Hard drug use was associated with number of body piercings. Suicide was associated with females having tattoos and younger age of both tattooing and body piercing. Tattoos and body piercings were found to be more common in females than males. Tattoos and/or body piercings can alert practitioners to the possibility of other risk-taking behaviors in adolescents, leading to preventive measures, including counseling. Tattoo and body piercing discovery should be an important part of a health maintenance visit to best direct adolescent medical care.

Piercings in medical students and their effects on the skin*

Science.gov (United States)

Purim, Kátia Sheylla Malta; Rosario, Bernardo Augusto; Rosario, Cristine Secco; Guimarães, Ana Tereza Bittencourt

2014-01-01

BACKGROUND Piercings are body embellishments commonly seen in young people, however their inherent risk of infection and scarring disorders are less divulged. OBJECTIVE To evaluate the prevalence of body piercings among medical students and their possible dermatologic consequences. METHODS Cross-sectional study with 58 medical students, by means of a structured questionnaire covering socio-demographic characteristics, technical issues related to the piercing and characteristics of the dermatologic complications. RESULTS The sample was predominantly female (86.2%), with mean age 24 ± 3 years. The placement of the first piercing occurred during adolescence (median age 15), without medical supervision (91.4%) or knowledge of parents/guardians (74%). Most piercings were made of metal alloy/stainless steel, in a dumbbell model (51.7%), inserted in the umbilical area (53.5%) or ear (41.4%), with frequent cutaneous reactions in the first six months post-piercing. Hypertrophic scarring, pain, swelling and infection (ppiercings. CONCLUSION Piercing insertion occurred during adolescence. Local inflammatory and infectious reactions were common. Scarring disorders and dermatitis appeared in the long term. There is need for preventive and educational activities, starting with those in the academic environment. PMID:25387495

Julianne Pierce VNS Matrix / Julianne Pierce ; interv. Tilman Baumgärtel

Index Scriptorium Estoniae

Pierce, Julianne

2006-01-01

Intervjuu austraalia kunstniku Julianne Pierce'iga, kes koos Josephine Starrsi, Francesca da Rimini ja Virginia Barretiga lõi 1991. a. Sydney's naiskunstirühmituse VNS Matrix ning kirjutas "21. sajandi küberfeministliku manifesti". Rühmituse töödest

LUSH-based SPR sensor for the detection of alcohols and pheromone

Science.gov (United States)

Lau, Hui-Chong; Lee, Yeon-Kyung; Kwon, Jae-Young; Sohn, Young-Soo; Lim, Jeong Ok

2013-05-01

Protein is a widely used sensing substrate in the biosensing technology. In the study conducted here, we used odorant binding protein, LUSH from Drosophila as a biosensing substrate in a miniaturized surface plasmon resonance (SPR) sensor. LUSH contains the specific alcohols binding sites, which mediates the detection of alcohols and pheromone. We first modified the surface of the gold sensor chip using the self assembled monolayer in the chloroform solution. The saturated concentration was determined prior to the detection of alcohols and pheromone at various concentrations. The results showed that the LUSH was saturated at 1000 μg/ml on the gold sensor chip. The detection response of LUSH was significant at higher concentration of alcohols. LUSH detected ethanol at concentration >=50% propanol was detected at >=25% whereas pheromone was detected at >=1.25 μg/μl. The results provide some fundamental information on the potential use of LUSH-based SPR as a simple and easy protein-based sensor in the near future.

SPR 2015. Abstracts

International Nuclear Information System (INIS)

2015-01-01

The volume contains the abstracts of the SPR (society for pediatric radiology) 2015 meeting covering the following issues: fetal imaging, muscoskeletal imaging, cardiac imaging, chest imaging, oncologic imaging, tools for process improvement, child abuse, contrast enhanced ultrasound, image gently - update of radiation dose recording/reporting/monitoring - meaningful or useless meaning?, pediatric thoracic imaging, ALARA.

SPR 2015. Abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-04-01

The volume contains the abstracts of the SPR (society for pediatric radiology) 2015 meeting covering the following issues: fetal imaging, muscoskeletal imaging, cardiac imaging, chest imaging, oncologic imaging, tools for process improvement, child abuse, contrast enhanced ultrasound, image gently - update of radiation dose recording/reporting/monitoring - meaningful or useless meaning?, pediatric thoracic imaging, ALARA.

Adverse consequences of tattoos and body piercings.

Science.gov (United States)

Larzo, Melissa R; Poe, Susannah Grimm

2006-03-01

Body piercings and tattoos are becoming more common in the adolescent population today. Despite their movement into mainstream society, literature to aid in counseling of teens about these issues is scant. The practitioner dealing with this population of patients must be armed with the information necessary that will help adolescents make informed decisions about tattoos and piercings.

In Vitro Adherence of Oral Bacteria to Different Types of Tongue Piercings.

Science.gov (United States)

Borges, Lucas Pereira; Ferreira-Filho, Julio Cesar Campos; Martins, Julia Medeiros; Alves, Caroline Vieira; Santiago, Bianca Marques; Valença, Ana Maria Gondim

2016-01-01

The purpose of this work was to verify in vitro adherence of E. corrodens and S. oralis to the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU) and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type) were individually incubated in 5 mL of BHI broth and 50  μ L of inoculum at 37°C/24 h. The other 96 piercings formed the control group and were individually incubated in 5 mL of BHI broth at 37°C/24 h. Plates were incubated at 37°C/48 h for counting of CFU/mL and data were submitted to statistical analysis ( p value piercings, showing lower colonization ( p piercings. The four types of piercings were susceptible to colonization by E. corrodens and S. oralis , and bacterial adhesion was more significant in those made of Bioplast and Teflon. The piercings presented bacterial colonies on their surface, being higher in plastic piercings probably due to their uneven and rough surface.

PRELIMINARY STUDIES OF RIVETED JOINTS AT FEED FORCE

Directory of Open Access Journals (Sweden)

Radosław Bielawski

2015-08-01

Full Text Available The aim of the study was to determine the feasibility of riveted joints in composites materials. Static tensile test method was used. In the test one type of glass fabric was used (Interglas 92140 from which two types of composite samples were prepared. In each sample the same type of fiber with the same fiber orientation – 3 layers - was used. The samples had dimensions of 100×100 mm and thickness of approximately 1 mm. The composite probes were located in a metal frame with a screw connection which was made of screws with nominal thread pitch M5. Screws were tightened with constant torque. It was to provide an axial force to the sample during the tensile test. The frame was placed between cross-bars of tensile machine INSTRON 8516. The samples were stretched at a speed of 0.05 mm/s at a distance up to 16 mm. During the tensile test displacement of the samples and pull force were registered. Depending on the fibre orientations and the value of feed force, damage models were described. On the basis of the results the possibility of usage of aluminium rivet nuts connections in composite materials was determined.

[Association between tattoos, piercings and risk behaviors in adolescents].

Science.gov (United States)

Cossio, María Laura T; Giesen, Laura F; Araya, Gabriela; Pérez-Cotapos, María Luisa S

2012-02-01

The use of tattoos and piercings has increased, especially among adolescents in the last decades. To evaluate the prevalence of these behaviors in adolescents and their association with risk behaviors such as alcohol, tobacco and illicit drug use and sexual promiscuity. An anonymous and confidential survey about tattooing and piercings was applied to randomly selected high school teenagers, attending municipal, private-subsidized and private schools, in four sectors of Santiago (north-east, south-east, north-west, south-west). The surveys were answered by 1329 participants with a mean age of 15 years (62% women) from 9 schools in Santiago. The prevalence of tattoos was 1.7% (confidence intervals (CI) 1.1% to 2.5%). The figure for piercings was 30.6% (CI 28.2 to 33.1%). A higher prevalence of tattooing and piercings was observed in groups with a history of psychiatric disorders, criminal records, alcohol, tobacco and illicit drug consumption and initiation of sexual activity (p < 0,001). This study confirms that tattoos and piercings are indicators of adolescent risk behaviors.

["My body belongs to me"--cultural history and psychology of piercings and tattoos].

Science.gov (United States)

Stirn, A

2007-02-01

At present tattoos and piercings can no longer be regarded as destructive acts of self mutilation practized by fringe groups. Body modifications (BMs) are found in virtually all preindustrial cultures and have their roots in ancient myths and magical rituals. The prevalence of tattoos and piercings in the German population is 8.5% and 6.8%, respectively. Unemployed young men and young women who do not live in a firm partnership show particularly high prevalences. The incidence of BMs correlates positively with the personality trait "sensation seeking", particularly in young women. BMs often serve to express individuality and identity, and they also reflect changed attitude towards the human body and body art as well as following fashion trends. However, BMs can also provide valuable diagnostic indications for identity search and risk taking behaviour.

Tattoos, body piercings, and self-injury: is there a connection? Investigations on a core group of participants practicing body modification.

Science.gov (United States)

Stirn, Aglaja; Hinz, Andreas

2008-05-01

Reliable psychosocial data about practitioners of body piercing and tattooing are few and controversial. The goal of this study was to reinvestigate the issue by studying a large sample of individuals with body modifications (BMs), focusing on the motives and relations to biographical events. A 55-item anonymous self-report questionnaire was distributed among volunteers of what is considered to be a core group of individuals wearing BMs (N=432). Results show that BMs changed the participants' attitude toward their body considerably, and 34% of all participants reported BM practices in conjunction with decisive biographical events. Twenty-seven percent of the participants admitted self-cutting during childhood. This group differed from the group without self-cutting with respect to several features before, during, and after BM. The rate of medical complications of BM was 16% in the total sample, with a remarkably higher rate (26%) among participants with a history of self-cutting. The data suggest that the significance of BMs ranges from simple peer group imitations to highly informative symptoms of possibly severe psychopathological conditions. In the latter case, BMs sometimes serve as therapeutic substitutes.

Overview of complications secondary to tongue and lip piercings.

Science.gov (United States)

Maheu-Robert, Léo-François; Andrian, Elisoa; Grenier, Daniel

2009-07-01

In recent years, intraoral and perioral piercings have grown in popularity among teenagers and young adults. This is of concern to dental and medical professionals because of the risks and complications for oral, dental and general health. The risks and complications associated with tongue and lip piercings range from abnormal tooth wear and cracked tooth syndrome to gingival recession and systemic infections. In this report, we provide an overview of possible problems associated with oral piercings that may be encountered by dentists.

Application of hard coatings for blanking and piercing tools

DEFF Research Database (Denmark)

Podgornik, B.; Zajec, B.; Bay, Niels

2011-01-01

The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing...... critical value under dry friction conditions and leads to tool failure. Therefore, at present oxidation and temperature resistant hard coatings can give improved wear resistance of stamping tools, but elimination of lubricants in blanking and piercing processes is still not feasible....

120-MM Target Practice Cone Stabilized Discarding Sabot with Tracer (TPCSDS-T) M865 (E3) Rework Report (Pop-Rivet Design)

National Research Council Canada - National Science Library

Donlon, Francis

2002-01-01

.... The team came up with three different solutions for field fix rework: (a) pop rivets; (b) foam fill, and (c) pool of epoxy. The foam design was the number one choice of the team, but the pop rivets had lower overall risk...

Patients' perceptions of patient care providers with tattoos and/or body piercings.

Science.gov (United States)

Westerfield, Heather V; Stafford, Amy B; Speroni, Karen Gabel; Daniel, Marlon G

2012-03-01

This study evaluated patients' perceptions of patient care providers with visible tattoos and/or body piercings. As tattooing and body piercing are increasingly popular, research that informs nursing administrators regarding policies on patient care providers having visible tattoos and body piercings is warranted. A total of 150 hospitalized adult patients compared pictures of male and female patient care providers in uniform with and without tattoos and/or nonearlobe body piercings. Patient care providers with visible tattoos and/or body piercings were not perceived by patients in this study as more caring, confident, reliable, attentive, cooperative, professional, efficient, or approachable than nontattooed or nonpierced providers. Tattooed female providers were perceived as less professional than male providers with similar tattoos. Female providers with piercings were perceived as less confident, professional, efficient, and approachable than nonpierced female providers. Nursing administrators should develop and/or evaluate policies regarding patient care providers with visible tattoos and/or body piercings.

Profile of oral piercing users and implications resulting from its use

Directory of Open Access Journals (Sweden)

Jeferson da Costa Marchiori

2009-01-01

Full Text Available Objective: To identify the profile of oral piercing users and the possible implications resulting from its use, as well as explaining to dentists about the possible consequences to their patients as a result of wearing this type of jewelry in the oral region.Methods: Fifty-one oral piercing users were interviewed. They were aged between 18 and 42 year, from different social classes, and resident in the city of Santa Maria, Rio Grande do Sul, Brazil.Results: Based on the questionnaires analyzed, the majority of users had tongue or lip piercing as a way to express identity, and 45% reported the occurrence of some type of oral and/or general alteration associated with the use of piercings. Conclusion: The majority of alterations are harmful to the piercing user’s health, therefore, professionals in the Dentistry area must be warnedto explain to their patients, who use oral piercings, about the consequences that may occur and the need for special care to ameliorate these problems.

Friction riveting. Development and analysis of a new joining technique for polymer-metal multi-materials structures

Energy Technology Data Exchange (ETDEWEB)

Amancio, S.

2007-07-01

A new Friction Riveting technique for polymeric-metallic joints was developed, demonstrated and characterized in this work, as an alternative, reliable, environmental compatible and economically viable spot joining process. In the simplest process variant a rotating cylindrical metallic rivet is inserted in a thermoplastic base plate. The high rotation speed and pressure increase friction and heat is generated. The local increase in temperature induces the formation of a softened/molten polymer layer around the tip of the rotating rivet. When a certain penetration depth is achieved the heat input rate becomes higher than heat outflow (owing to the low polymer thermal conductivity), temperature highly increases and the rivet tip plasticizes. At this point rotation is stopped and the forging pressure applied, so the plasticized rivet tip is deformed by the opposite reactive forces of colder polymeric volumes, assuming a paraboloidal pattern; after cooling it becomes anchored in the polymeric base plate. In this work case-study joints on commercially available polyetherimide (PEI) and aluminium 2024- T351(Al-Cu-Mg alloy) were chosen for demonstrating proposed theories, models and mechanisms, as well as an analytical heat input model. Sound friction riveted point-on-plate and single-rivet overlap joints with elevated joint efficiencies in terms of base materials strength were obtained (joint efficiencies for point-on-plate joints: 60 %.93 %; for overlaps: 70 %) through tensile and lap shear testing at room temperature. The influence of process parameters (rotational speed, total time and total pressure) on process variables and joint properties were evaluated by thermometry, infrared thermography, microscopy, Vickers microhardness, X-ray microtomography and by gel permeation chromatography. Temperature (average maximal temperatures 500 deg C) was directly proportional to rotation speed, total time and total pressure. Volumetric flaw formation was directly proportional

Complications of oral and peri-oral piercings: a summary of case reports.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2011-05-01

To systemically search the literature for case reports concerning adverse effects associated with oral and peri-oral piercings on oral health and/or general health.   MEDLINE and the Cochrane Central Register of Controlled Trials (CENTRAL) were searched up through 1 April 2010 to identify appropriate studies. Independent screening of the titles and abstracts identified 1169 papers from MEDLINE and 73 papers from CENTRAL. Subsequently, 67 papers describing 83 cases were processed for data extraction. The case reports described complications in oral and general health. In this review, 96 complications were described for 83 cases. Of the 96 reported complications, 81% (n=84) occurred in cases of tongue piercings, 20% (n=21) in cases of lip piercings and 1% (n=1) in cases of other oral piercings. In eight cases, subjects had two oral and/or peri-oral piercings. Gingival recession was the most frequently described complication. Periodontitis and gingival recession were seen at the central mandibular incisors. Tooth fracture is mostly reported in subjects with tongue piercings. Among the case reports, there were complications like normal post-operative swelling and localized inflammation but also more serious complication that may even have been life threatening. Also in the long term, piercing may be associated with gingival recession and tooth fracture. Therefore, oral and/or peri-oral piercings are not without risks. Patients considering a piercing should be made aware of this. Those patients wearing a piercing should be screened by a dental professional for possible complications on a regular basis. © 2011 John Wiley & Sons A/S.

Unstable oscillatory Pierce modes of neutralized electron beams

International Nuclear Information System (INIS)

Cary, J.R.; Lemons, D.S.

1982-01-01

Oscillatory modes of the Pierce system have been calculated. These modes are found to have growth rates comparable to the previously investigated purely growing modes. When these modes are included, it is found that the Pierce system is unstable for most values of ω/sub p/ L/V 0 >π

Breast abscess after nipple piercing: sonographic findings with clinical correlation.

Science.gov (United States)

Leibman, A Jill; Misra, Monika; Castaldi, Maria

2011-09-01

The purpose of this series was to review the spectrum of clinical and sonographic features associated with infection after nipple piercing. Between 2002 and 2010, 6 patients presented to our breast center with a breast abscess after nipple piercing. A retrospective analysis of the imaging findings was performed with clinical and pathologic correlation. Patients with breast infections after nipple piercing tend to be young, and the timing since piercing varies from 2 weeks to 17 months. Sonography showed a complex or hypoechoic mass in 5 of 6 patients. Treatment of breast abscesses included surgical incision and drainage, percutaneous drainage, and antibiotic therapy. Surgical evacuation is commonly performed; however, sonographically guided aspiration may be an appropriate management strategy.

The incidence of complications associated with lip and/or tongue piercings: a systematic review.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2016-02-01

This review determines the incidence of complications associated with lip and/or tongue piercings based on a systematic evaluation of the available literature. MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through June 2014 to identify appropriate studies. The incidence of complications, as established by a dental professional associated with oral and peri-oral piercings, was evaluated in populations with lip and/or tongue piercings. The quality of the case-control studies was assessed using the Newcastle-Ottawa Scale. For case series studies, the risk of bias was assessed using the National Institute for Health and Clinical Excellence scale. An independent screening of 1580 unique titles and abstracts revealed 15 publications that met the eligibility criteria. The incidence of gingival recessions appeared to be 50% in subjects with lip piercings and 44% in subjects with a tongue piercing. Tooth injuries were observed in 26% individuals with lip piercings and in up to 37% of individuals with tongue piercings. Subjects with a lip piercing were 4.14 times (P = 0.005) more likely to develop gingival recession than those without a lip piercing. Subjects with a tongue piercing were more likely than non-pierced subjects to experience gingival recession (relative risk (RR) 2.77; P = 0.00001) and tooth injuries (RR 2.44; P = 0.003). Both lip and tongue piercings are highly associated with the risk of gingival recession, and tongue piercings are also associated with tooth injuries. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

In Vitro Adherence of Oral Bacteria to Different Types of Tongue Piercings

Directory of Open Access Journals (Sweden)

Lucas Pereira Borges

2016-01-01

Full Text Available The purpose of this work was to verify in vitro adherence of E. corrodens and S. oralis to the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type were individually incubated in 5 mL of BHI broth and 50 μL of inoculum at 37°C/24 h. The other 96 piercings formed the control group and were individually incubated in 5 mL of BHI broth at 37°C/24 h. Plates were incubated at 37°C/48 h for counting of CFU/mL and data were submitted to statistical analysis (p value <0.05. For E. corrodens, difference among types of material was observed (p<0.001 and titanium and surgical steel showed lower bacterial adherence. The adherence of S. oralis differed among piercings, showing lower colonization (p<0.007 in titanium and surgical steel piercings. The four types of piercings were susceptible to colonization by E. corrodens and S. oralis, and bacterial adhesion was more significant in those made of Bioplast and Teflon. The piercings presented bacterial colonies on their surface, being higher in plastic piercings probably due to their uneven and rough surface.

Binding behavior of CRP and anti-CRP antibody analyzed with SPR and AFM measurement

International Nuclear Information System (INIS)

Lee, Soo-Keun; Kim, Hyun-Chul; Cho, Sang-Joon; Jeong, Sang Won; Jeon, Won Bae

2008-01-01

Atomic force microscope (AFM) was exploited to take picture of the molecular topology of C-reactive protein (CRP) in phosphate-buffered saline (PBS) solution. An explicit molecular image of CRP demonstrated a pentagonal structure composed of five subunits. Dimensions of the doughnut-shaped CRP molecule measured by AFM were about 25 nm in outside diameter and 10 nm in central pore diameter, and the height of CRP molecule was about 4 nm which was comparable to the value determined by X-ray crystallography. Bis(N-succinimido)-11,11'-dithiobis (undecyl succinate) (DSNHS) was synthesized for use as a linker for immobilizing anti-CRP antibody (anti-CRP) onto the gold surface of a surface plasmon resonance (SPR) sensor chip. DSNHS formed self-assembled monolayer (SAM) on the gold surface. By use of an AFM tip, a pattern of ditch was engraved within the SAM of DSNHS, and anti-CRP was immobilized on the engraved SAM through replacement of N-hydroxysuccinimide group on the outside surface of DSNHS by the amine group of anti-CRP. Formation of CRP/anti-CRP complex on the gold surface of SPR sensor chip was clearly demonstrated by measuring SPR angle shift. A consecutive series of SAM, SAM/anti-CRP, and SAM/anti-CRP/CRP complexes was generated on a SPR sensor chip, and the changes in depth of the ditch were monitored by taking AFM images of the complexes. Comparative analysis of the depth differences indicates that binding of CRP to anti-CRP occurs in a planar mode

A Dermal Piercing Complicated by Mycobacterium fortuitum

Science.gov (United States)

Scroggins-Markle, Leslie; Kelly, Brent

2013-01-01

Background. Dermal piercings have recently become a fashion symbol. Common complications include hypertrophic scarring, rejection, local infection, contact allergy, and traumatic tearing. We report a rare case of Mycobacterium fortuitum following a dermal piercing and discuss its medical implications and treatments. Case. A previously healthy 19-year-old woman presented complaining of erythema and edema at the site of a dermal piercing on the right fourth dorsal finger. She was treated with a 10-day course of trimethoprim-sulfamethoxazole and one course of cephalexin by her primary care physician with incomplete resolution. The patient stated that she had been swimming at a local water park daily. A punch biopsy around the dermal stud was performed, and cultures with sensitivities revealed Mycobacterium fortuitum. The patient was treated with clarithromycin and ciprofloxacin for two months receiving full resolution. Discussion. Mycobacterium fortuitum is an infrequent human pathogen. This organism is a Runyon group IV, rapidly growing nontuberculous mycobacteria, often found in water,soil, and dust. Treatment options vary due to the size of the lesion. Small lesions are typically excised, while larger lesions require treatment for 2–6 months with antibiotics. We recommend a high level of suspicion for atypical mycobacterial infections in a piercing resistant to other therapies. PMID:24073343

A Dermal Piercing Complicated by Mycobacterium fortuitum

Directory of Open Access Journals (Sweden)

Trisha Patel

2013-01-01

Full Text Available Background. Dermal piercings have recently become a fashion symbol. Common complications include hypertrophic scarring, rejection, local infection, contact allergy, and traumatic tearing. We report a rare case of Mycobacterium fortuitum following a dermal piercing and discuss its medical implications and treatments. Case. A previously healthy 19-year-old woman presented complaining of erythema and edema at the site of a dermal piercing on the right fourth dorsal finger. She was treated with a 10-day course of trimethoprim-sulfamethoxazole and one course of cephalexin by her primary care physician with incomplete resolution. The patient stated that she had been swimming at a local water park daily. A punch biopsy around the dermal stud was performed, and cultures with sensitivities revealed Mycobacterium fortuitum. The patient was treated with clarithromycin and ciprofloxacin for two months receiving full resolution. Discussion. Mycobacterium fortuitum is an infrequent human pathogen. This organism is a Runyon group IV, rapidly growing nontuberculous mycobacteria, often found in water,soil, and dust. Treatment options vary due to the size of the lesion. Small lesions are typically excised, while larger lesions require treatment for 2–6 months with antibiotics. We recommend a high level of suspicion for atypical mycobacterial infections in a piercing resistant to other therapies.

SPR imaging combined with cyclic voltammetry for the detection of neural activity

Directory of Open Access Journals (Sweden)

Hui Li

2014-03-01

Full Text Available Surface plasmon resonance (SPR detects changes in refractive index at a metal-dielectric interface. In this study, SPR imaging (SPRi combined with cyclic voltammetry (CV was applied to detect neural activity in isolated bullfrog sciatic nerves. The neural activities induced by chemical and electrical stimulation led to an SPR response, and the activities were recorded in real time. The activities of different parts of the sciatic nerve were recorded and compared. The results demonstrated that SPR imaging combined with CV is a powerful tool for the investigation of neural activity.

The design of gridded pierce guns for accelerators

International Nuclear Information System (INIS)

True, R.

1985-01-01

It is vital to employ ultra-laminar beams in electron linacs to maximize charge transport to the target. This paper presents numerical and experimental design techniques which have led to significant improvements in gridded Pierce guns used in microwave tubes and electron linacs. The paper concludes with two gun/injector concepts which have demonstrated enhanced performance over standard triode Pierce guns

Awareness of health risks associated with body piercing and ...

African Journals Online (AJOL)

Recently, there has been a widespread practice of tattooing and body piercing among youths despite the increased number of potential complications associated to the practice. This study aims to assess the awareness of health risk associated with body piercing and tattooing in Federal Polytechnic Auchi, Edo state.

Enhanced gas sensing performance of TiO2 functionalized magneto-optical SPR sensors

OpenAIRE

Manera, Maria Grazia; Montagna, G.; Ferreiro-Vila, Elías; González-García, Lola; Sánchez-Valencia, J.R.; González-Elipe, Agustín R.; Cebollada, Alfonso; García-Martín, José Miguel; García-Martín, Antonio; Armelles Reig, Gaspar; Rella, Roberto

2011-01-01

Porous TiO2 thin films deposited by glancing angle deposition are used as sensing layers to monitor their sensing capabilities towards Volatile Organic Compounds both in a standard Surface Plasmon Resonance (SPR) sensor and in Magneto-Optical Surface Plasmon Resonance (MO-SPR) configuration in order to compare their sensing performances. Here our results on the enhanced sensing capability of these TiO2 functionalized MO-SPR sensors with Au/Co/Au transducers with respect to traditional SPR gas...

A Simulation for the Punchless Piercing Process using Lemaitre Damage Model

International Nuclear Information System (INIS)

Lee, Sang Wook; Pourboghrat, Farhang

2005-01-01

The punchless piercing is a process that uses highly pressurized fluid instead of the conventional punch to make holes into the sheet metal. This process has many advantages over the conventional method for piercing various shaped holes into very thin strips of metal, composite, etc. An important cost advantage comes from not having to use a punch. Another important advantage comes from the top quality of pierced holes produced by punchless piercing, as no secondary finishing process will be needed for removing burrs typically found in conventional cutting processes. The ABAQUS/Explicit FEM code coupled with Lemaitre damage model has been used to more precisely characterize the punchless piercing process. The formulation adopted for this purpose focuses on the development of an efficient stress integration algorithm and development of a user material subroutine (VUMAT). For verification, the computed results have been compared with those of the experimental results in the literature and shown to be in good agreement with each other. The results obtained from this work are expected to be of significant interest to automotive and aerospace industries interested in using the punchless piercing process

[Body modifications and sexual health : Impact of tattoos, body piercing and esthetic genital plastic surgery on the sexual health of women and men].

Science.gov (United States)

Stirn, Aglaja Valentina; Zannoni, Ronja

2017-09-01

The present paper addresses the psychological impact of body modifications (e.g. tattoos, body piercing and esthetic genital plastic surgery) on the sexual health of individuals and refers to past and present research insights. Body modifications are understood as invasive interventions on the human body, especially interventions on the human skin which result in (semi-)permanent changes. Tattoos and body piercing (in particular genital piercing) positively affect the sexual satisfaction and the sexual appeal of men and women but there is a controversial association with high risk sexual behavior. Moreover, this article focuses on esthetic genital plastic surgery based on the increasing interest and insights of the impact on female genital self-perception and sexual behavior.

SPR 2014. Abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-05-15

The proceedings of the SPR 2014 meeting include abstracts on the following topics: Body imaging techniques: practical advice for clinic work; thoracic imaging: focus on the lungs; gastrointestinal imaging: focus on the pancreas and bowel; genitourinary imaging: focus on gonadal radiology; muscoskeletal imaging; focus on oncology; child abuse and nor child abuse: focus on radiography; impact of NMR and CT imaging on management of CHD; education and communication: art and practice in pediatric radiology.

SPR 2014. Abstracts

International Nuclear Information System (INIS)

2014-01-01

The proceedings of the SPR 2014 meeting include abstracts on the following topics: Body imaging techniques: practical advice for clinic work; thoracic imaging: focus on the lungs; gastrointestinal imaging: focus on the pancreas and bowel; genitourinary imaging: focus on gonadal radiology; muscoskeletal imaging; focus on oncology; child abuse and nor child abuse: focus on radiography; impact of NMR and CT imaging on management of CHD; education and communication: art and practice in pediatric radiology.

Preliminary design for a pierce wiggler beamstick and addendum

International Nuclear Information System (INIS)

Pirkle, D.

1988-05-01

Lawrence Livermore National Laboratory is developing a fast tunable microwave source for operation at 250 GHz and 10kW peak output power. This report presents the preliminary design of a Pierce gun and solenoid magnet that will be compatible with a Pierce-wiggler electron beam formation system (beamstick). The beamstick will be an appropriate power source for a tunable gyro-BWO at 250 GHz. Figure 1 presents the major components of the Pierce-wiggler beamstick: the electron gun, solenoid, beam tunnel, wiggler, and vacuum valve. Figure 2 shows an artistic conception of how the beamstick will interface with the interaction magnet, modulator and gyro-BWO circuit at MIT. 15 figs

In Vitro Adherence of Oral Bacteria to Different Types of Tongue Piercings

OpenAIRE

Borges, Lucas Pereira; Ferreira-Filho, Julio Cesar Campos; Martins, Julia Medeiros; Alves, Caroline Vieira; Santiago, Bianca Marques; Valen?a, Ana Maria Gondim

2016-01-01

The purpose of this work was to verify in vitro adherence of E. corrodens and S. oralis to the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU) and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type) were individually incubated in 5?mL of BHI broth and 50??L of inoculum at 37?C/24?h. The other 96 piercings formed the control group and were i...

Periodontal health and lateral lower lip piercings: a split-mouth cross-sectional study.

Science.gov (United States)

Vilchez-Perez, Miguel Angel; Fuster-Torres, Ma Angeles; Figueiredo, Rui; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2009-07-01

To assess periodontal health of individuals with a lateral lower lip piercing and describe associated periodontal, dental and mucosal complications. A split-mouth study was performed in a sample of 50 patients with a lateral lower lip piercing who attended the Periodontal Pathology and Surgery Unit of the Dental School of the University of Barcelona. The patients underwent periodontal, dental and mucosal examination on both the piercing and the control sides. Piercing users were predominantly women (78%), with a mean age of 21.3 years (SD=4.4). The amounts of keratinized and attached gingiva were significantly lower on the piercing side, and the prevalence of gingival recession was higher (p=0.012). The canine and first bicuspid teeth were the most affected. Tooth fractures and cracks were more frequent on the piercing side (20%) when compared with the control (4%). Mucosal alterations were found in seven patients. The use of lateral lower lip piercings enhances gingival recession and reduces the amounts of keratinized and attached gingiva. These ornaments are also associated with tooth fractures and cracks.

Body piercings and posttraumatic stress disorder symptoms in young adults.

Science.gov (United States)

Bui, Eric; Rodgers, Rachel; Simon, Naomi M; Jehel, Louis; Metcalf, Christina A; Birmes, Philippe; Schmitt, Laurent

2013-02-01

Body piercing, which is prevalent in young adults, has been suggested to be associated with features usually related to posttraumatic stress disorder (PTSD) such as high-risk behaviours and psychopathological symptoms and might be motivated by a wish to deal with prior traumatic experiences. However, to date, no research has investigated the relationship between this practice and PTSD symptoms. The present research aims to investigate the possible relationship between body piercing and PTSD symptoms in French-speaking young adults. According to our results, having two or more body piercings was associated with a twofold increased risk for scoring above the cut-off score for PTSD on the PTSD checklist. Our findings suggest that two or more body piercings might serve as an identifiable marker for PTSD symptoms and may have important implications for clinical screening. Copyright © 2012 John Wiley & Sons, Ltd.

How Dr. Pierce Promoted Himself

Data.gov (United States)

Department of the Interior — This article is about Dr. Raymond V Pierce who owned St. Vincent Island before it became a refuge. The doctor painted advertisements for his famous “Woman’s Tonic”...

Perceptions of a photograph of a woman with visible piercings.

Science.gov (United States)

Martino, Sara

2008-08-01

To examine perceptions of people with visible piercings 105 undergraduate students from four different courses on campus (85 women, 20 men; M age=20.0 yr., SD=3.4) were randomly assigned to rate a photograph of a women with or without piercings on her eyebrow, ear, lip, and nose on 13 characteristics. Analysis indicated the model with visible piercings was rated less religious and more creative, artistic, and mysterious. These findings differ from previous findings on perception of tattoos. Implications and directions for research with different age groups are discussed.

Continuity of care of emergency surgical admissions: impact on SpR training.

Science.gov (United States)

Ledwidge, S F C; Bryden, E; Halestrap, P; Galland, R B

2008-06-01

Continuity of patient care is an important component of surgical education. This study assesses continuity of care in the current working climate. Data were collected prospectively on consecutive emergency general surgical admissions during one month. Our SpR rota is a partial shift 24 hour on call with the SpR's own consultant. The SpR is free of commitments the next day following post-take work. The on call general surgery SpR was designated the 'assessor'. Data were analysed according to involvement of the 'assessor' at subsequent stages of the admission--consent, operation, review during admission and review on discharge. Data were also collected defining whether the 'assessor' and operator followed-up the patient. There were 200 admissions; 108 female and 92 male. Overall 23% admissions had the same 'assessor' for all stages of patient care. The 'assessor' dealt with an aspect of patient care in 11% of admissions who underwent an operation and 29% of admissions who were conservatively managed. SpR follow-up of admissions on whom they operated was 70% but only 41% of admissions who were conservatively managed were followed-up by the assessing SpR. Complete in-hospital continuity of care was poor, although SpR follow-up of patients on whom they had operated was better. Introduction of shift patterns has reduced continuity of patient care. This will have a negative impact on both surgical training and patient care.

Piercing the corporate veil

International Nuclear Information System (INIS)

Goodwin, L.M.

1992-01-01

This article addresses the potential problems an economically troubled subsidiary can cause a parent company and offers strategies for insulating the trouble through good business practices and careful planning. The topics of the article include corporations and limited liability, piercing the corporate veil, environmental cleanup liabilities, and avoiding trouble

«[…] en enkel og saklig innføring i norsk språkhistorie» Språkhistorie som norskdidaktisk emne – et faghistorisk utsyn

Directory of Open Access Journals (Sweden)

Stian Hårstad

2016-09-01

Full Text Available Artikkelen tar for seg språkhistorie som norskdidaktisk emne i et faghistorisk perspektiv. På grunnlag av en lang rekke styringsdokumenter (læreplaner og studieplaner og fagdidaktisk og disiplinfaglig litteratur undersøkes hvordan språkets historiske dimensjoner har blitt tematisert som kunnskapsområde. Et hovedfunn i denne gjennomgangen er at det historiske (eller historiserende lengdesnittet har vært til stede gjennom hele 1900-tallet og fortsatt finnes i gjeldende læreplan – om enn med temmelig varierende vektlegging og detaljering. Læreplanene har i stor grad overlatt til praktikerne (lærerne og lærerutdannerne å avgrense hva de språkhistoriske emnene skal romme. Litteraturanalysen viser videre at den didaktiske refleksjonen på dette feltet bare unntaksvis har kommet på trykk, og denne begrensete språkhistorie-didaktiske debatten må forstås på bakgrunn av tilstanden i forsknings- og studiefaget.Nøkkelord: språkhistorie-didaktikk, språkdidaktikk, språkhistorie, norskdidaktikkAbstractThis article deals with language history as a didactic topic in the subject Norwegian as L1. On the basis of a wide range of documents (curricula and syllabi and didactic and disciplinary literature, the article seeks to examine how the historical dimensions of language have been treated as an area of knowledge. A main finding is that the historic (or historicizing perspective has been present through the entire 20th century and still can be found in the current curriculum – though the emphasis and itemization have varied significantly. The curricula have largely entrusted the practicians (the teachers and teacher educators with the powers to delineate the language history topics. The research review further shows that the didactic reflections within this field only sporadically have appeared in print, and this limited didactic discussion of language history must be understood on the background of the condition of the discipline

Breast abscess following nipple piercing: a case report and review of the literature.

Science.gov (United States)

Kapsimalakou, Smaragda; Grande-Nagel, Isabell; Simon, Martin; Fischer, Dorothea; Thill, Marc; Stöckelhuber, Beate M

2010-12-01

Nipple piercing gains popularity and social acceptance within the last years, especially among young people. The medical literature reports an increase of complications in the post-piercing period. We report a case of a young woman, who presented with a light enlargement of the right breast and tenderness in the retroareolar region following nipple piercing 5 months ago. On ultrasound, a poorly marginated hypoechoic lesion was seen which was suspicious of an inflammation. After 1 week of antibiotic therapy, the mass had enlarged. As carcinoma could not be excluded, open biopsy was performed. Histology showed signs of chronic mastitis. To date, only a few reports of breast abscess after nipple piercing have been published. With the increasing prevalence of body piercing, it is important to document and report infections which may be discovered many months following piercing. Carcinoma can mimic breast abscess and should be included in the differential diagnosis.

Multifrequency Eddy Current Inspection of Corrosion in Clad Aluminum Riveted Lap Joints and Its Effect on Fatigue Life

Science.gov (United States)

Okafor, A. C.; Natarajan, S.

2007-03-01

Aging aircraft are prone to corrosion damage and fatigue cracks in riveted lap joints of fuselage skin panels. This can cause catastrophic failure if not detected and repaired. Hence detection of corrosion damage and monitoring its effect on structural integrity are essential. This paper presents multifrequency eddy current (EC) inspection of corrosion damage and machined material loss defect in clad A1 2024-T3 riveted lap joints and its effect on fatigue life. Results of eddy current inspection, corrosion product removal and fatigue testing are presented.

Multifrequency Eddy Current Inspection of Corrosion in Clad Aluminum Riveted Lap Joints and Its Effect on Fatigue Life

International Nuclear Information System (INIS)

Okafor, A. C.; Natarajan, S.

2007-01-01

Aging aircraft are prone to corrosion damage and fatigue cracks in riveted lap joints of fuselage skin panels. This can cause catastrophic failure if not detected and repaired. Hence detection of corrosion damage and monitoring its effect on structural integrity are essential. This paper presents multifrequency eddy current (EC) inspection of corrosion damage and machined material loss defect in clad A1 2024-T3 riveted lap joints and its effect on fatigue life. Results of eddy current inspection, corrosion product removal and fatigue testing are presented

Electromagnetic theory of the radiative Pierce instability

International Nuclear Information System (INIS)

Klochkov, D.N.; Rukhadze, A.A.

1997-01-01

The radiative Pierce instability of a relativistic electron beam in a waveguide stabilized by an infinite strong magnetic field is considered. the increment and conditions for instability development in a wide interval of the beam currents are determined on the basis of the perturbation theory. It is shown that the instability has always the Raman character and is threshold less in current for the Pierce boundary conditions. It permits sufficiently strictly to define the instability saturation level from breaking the resonance condition and to estimate the radiation efficiency

27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...

Transmission of Hepatitis C Virus Infection Through Tattooing and Piercing: A Critical Review

Science.gov (United States)

Tohme, Rania A.; Holmberg, Scott D.

2015-01-01

Tattoos and piercings are increasing, especially among youths, but the risk of hepatitis C virus (HCV) infection from these practices has not been adequately assessed and there are conflicting findings in the literature. We evaluated the risk of HCV infection from tattooing and piercing using the Meta-analysis of Observational Studies in Epidemiology (MOOSE) guidelines. Studies that specified the venue of tattooing and/or piercing showed no definitive evidence for an increased risk of HCV infection when tattoos and piercings were received in professional parlors. However, the risk of HCV infection is significant, especially among high-risk groups (adjusted odds ratio, 2.0–3.6), when tattoos are applied in prison settings or by friends. Prevention interventions are needed to avoid the transmission of hepatitis C from tattooing and piercing in prisons, homes, and other potentially nonsterile settings. Youths also should be educated on the need to have tattoos and piercings performed under sterile conditions to avoid HCV infection. PMID:22291098

First glimpse of the functional benefits of clitoral hood piercings.

Science.gov (United States)

Millner, Vaughn S; Eichold, Bernard H; Sharpe, Thomasina H; Lynn, Sherwood C

2005-09-01

In this exploratory study, we identify a positive relationship between vertical clitoral hood piercing and desire, frequency of intercourse and arousal. There were no dramatic differences in orgasmic functioning. Clinicians can play key roles in educating patients about potential outcomes and risks of genital piercing.

Educational intervention about oral piercing knowledge among dental students and adolescents at schools.

Science.gov (United States)

Junco, Pilar; Barrios, Rocío; Ruiz, María José; Bravo, Manuel

2017-10-01

Oral piercing can lead to complications and dentists are in a unique position to detect such complications. The purpose of this study was: (i) to assess the immediate and the long-term effects, on dental students, of a training programme about oral piercing knowledge; and (ii) to assess the immediate effect, on adolescents, of a single educational intervention session about oral piercing. A training programme for dental students (n = 66) was carried out in three phases. The last phase consisted of preparing and giving talks about oral piercing at schools, which was delivered by a random selection of dental students involved in the training programme. Dental students answered a questionnaire about oral piercing knowledge, before, immediately after (only the dental students included in the last phase) and 12 months after the training programme. Adolescents (n = 347) answered a survey about oral piercing knowledge before and after the talks. There were statistically significant differences in all comparison groups, except for the results in the 'before intervention' and in the '12 months after intervention' groups among dental students who had not prepared and given the talks to adolescents. Knowledge about oral piercing significantly improved among adolescents when comparing results before (mean questionnaire score = 3.0) and after (mean questionnaire score = 6.2) the talks. Oral piercing educational intervention had a favourable impact on adolescents and dental students, particularly among those who were more involved in the learning process. © 2017 FDI World Dental Federation.

Joule-Thomson effect in a Pierce electron gun

International Nuclear Information System (INIS)

Batalin, V.A.

1982-01-01

A model which can be investigated both by means of the system of Vlasov equations and by means of ideal gas state equation is proposed for evaluation of emittance growth in the Pierce electron gun of electron beam with the limiting small distribution rate and intended for electron cooling facilities. The assumption has been made that transverse emittance growth is different from the zero. Thermodynamical approach to the problem of electron beam propagation permits to evaluate the increase of its emittance. It is shown that the increase of the electron beam emittance in the Pierce electron gun is similar to Joule-Thompson effect for gases. The effect increases with the decrease of the beam initial temperature. The increase of the emittance can become essential even in hte perfect (without aberration) Pierce optics at beam transverse temperature of the order of 0.1 eV

SPR 2017. Abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2017-05-15

The conference proceedings SPR 2017 include abstracts on the following issues: gastrointestinal radiography - inflammatory bowel diseases, cardiovascular CTA, general muscoskeletal radiology, muscoskeletal congenital development diseases, general pediatric radiology - chest, muscoskeletal imaging - marrow and infectious disorders, state-of-the-art body MR imaging, practical pediatric sonography, quality and professionalism, CT imaging in congenital heart diseases, radiographic courses, body MT techniques, contrast enhanced ultrasound, machine learning, forensic imaging, the radiation dos conundrum - reconciling imaging, imagining and managing, the practice of radiology, interventional radiology, neuroradiology, PET/MR.

Tattoos and Piercings: Attitudes, Behaviors, and Interpretations of College Students

Science.gov (United States)

Horne, Jenn; Knox, David; Zusman, Jane; Zusman, Marty E.

2007-01-01

Previously, in those segments of America where "proper" behavior was valued, tattoos and body piercings were examples of what Goffman identified as "stigma"--they spoiled one's identity. Today, tattoos and piercings have become more mainstream. This study reports the survey of 400 undergraduates at a large southeastern university. Regarding…

Electromagnetic theory of the radiative Pierce instability

International Nuclear Information System (INIS)

Klochkov, D.N.; Rukhadze, A.A.

1997-01-01

A study is made of the radiative Pierce instability of a relativistic electron beam propagating in a waveguide in the presence of an infinitely strong magnetic field. The perturbation theory is used to find the growth rates and conditions of instability over a broad range of the beam current. It is shown that, under the Pierce boundary conditions, the instability is Raman in nature, and there is no current threshold for the instability. This allows the instability saturation level to be accurately determined from the condition for the violation of the Cherenkov resonance and the radiation efficiency to be estimated

Equilibrium double layers in extended Pierce diodes

International Nuclear Information System (INIS)

Ciubotariu-Jassy, C.I.

1992-01-01

The extended Pierce diode is similar to the standard (or classical) Pierce diode, but has passive circuit elements in place of the short circuit between the electrodes. This device is important as an approximation to real bounded plasma systems. It consists of two parallel plane electrodes (an emitter located at x=0 and a collector located at x=l) and a collisionless cold electron beam travelling between them. The electrons are neutralized by a background of comoving massive ions. This situation is analysed in this paper and new equilibrium double layer (DL) plasma structures are obtained. (author) 6 refs., 3 figs

The Pierce diode with an external circuit: II, Non-uniform equilibria

International Nuclear Information System (INIS)

Lawson, W.S.

1987-01-01

The non-uniform (non-linear) equilibria of the classical (short circuit) Pierce diode and the extended (series RLC external circuit) Pierce diode are described theoretically, and explored via computer simulation. It is found that most equilibria are correctly predicted by theory, but that the continuous set of equilibria of the classical Pierce diode at α = 2π are not observed. The stability characteristics of the non-uniform equilibria are also worked out, and are consistent with the simulations. 8 refs., 22 figs., 3 tabs

Need for improved public health protection of young people wanting body piercing: evidence from a look-back exercise at a piercing and tattooing premises with poor hygiene practices, Wales (UK) 2015.

Science.gov (United States)

Perry, M; Lewis, H; Thomas, D Rh; Mason, B; Richardson, G

2018-04-30

Following a cluster of serious pseudomonas skin infections linked to a body piercing and tattooing premises, a look-back exercise was carried out to offer clients a screen for blood-borne viruses. Of those attending for screening 72% (581/809) had a piercing procedure in the premises of interest: 94 (16%) were under 16 years of age at the time of screening. The most common site of piercing was ear (34%), followed by nose (27%), nipple (21%) and navel (21%). A small number (<5) tested positive for hepatitis B and C, with no evidence this was linked to the premises. However, 36% (211/581) of clients reported a skin infection associated with their piercing. Using data from client forms, 36% provided a false age. Those aged under 16 years (OR 4.5, 95% CI 2.7-7.7) and those receiving a piercing at an intimate site (OR 2.1, 95% CI 1.3-3.6) were more likely to provide a false age. The findings from this exercise were used to support the drafting of the Public Health (Wales) Bill which proposed better regulation of piercing premises and the need to provide proof of being 18 years of age or over before having a piercing of an intimate site.

Experimental Characterization of Supercavitating Finds Piercing a Ventilated Supercavity

Science.gov (United States)

2013-08-05

01-2011 --31-07-2013 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Experimental Characterization of Supercavitating Finds Piercing a Ventilated...presents the results from water tunnel experiments on supercavitating fins performed at the Garfield Thomas Water Tunnel of the Pennsylvania State...SUBJECT TERMS supercavitation , fins, cavity-piercing 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT u a. REPORT I~· ABSTRACT I~· THIS

Tattoos, piercings, and skin adornments.

Science.gov (United States)

Cronin, T A

2001-10-01

Tattoos, body piercings, and other skin adornments have a long and fascinating history, and continue to be prominent today. It is important for dermatology nurses to understand and to educate their patients regarding the dermatologic implications of tattooing, body piecing, and scarification.

Study on corrosion products from ear piercing studs

International Nuclear Information System (INIS)

Rogero, Sizue O.; Costa, Isolda; Saiki, Mitiko

2000-01-01

In this work instrumental neutron activation analysis was applied to analyse elemental composition of commercial gold coated ear piercing substrate and metals present in their corrosion products. The cytotoxic effect was also verified in these corrosion product extracts, probably, due to the lixiviation of Ni present in high quantity in their substrates. The analysis of gold coated ear piercing surfaces by scanning electron microscopy before and after the corrosion test showed coating defects and the occurrence of corrosion process. (author)

Body art: attitudes and practices regarding body piercing among urban undergraduates.

Science.gov (United States)

Schorzman, Cindy M; Gold, Melanie A; Downs, Julie S; Murray, Pamela J

2007-10-01

To describe the knowledge, attitudes, and practices of young adults toward body piercing. An anonymous 30-item survey was given to 103 undergraduate students at the campus health service of a large urban university. The questionnaire collected data on students' perceptions regarding the social acceptability of body piercing, their experiences with and attitudes toward this form of body art, and their knowledge of associated health risks. One hundred (97%) out of the 103 surveys distributed had sufficient data for analysis. Fifty-six percent of participants (age range, 17 to 25 years) reported having a body piercing at one time. Participants with a piercing were more likely to have a tattoo (OR, 4.13; 95% CI, 1.10-15.56; P=.04). The majority of participants (65 [78%]) reported "liking" body piercing on others, though a smaller percentage (45 [52%]) reported "liking" it on themselves (z=3.58, Part is acceptable on others, they feel it is less acceptable on themselves. Study participants displayed a high level of awareness regarding the potential health risks of body art, and, in fact, overestimate those risks. Implications for patient education are addressed.

Oral piercings and their dental implications: a mini review.

Science.gov (United States)

Singh, Amrinder; Tuli, Avantika

2012-05-01

Oral piercing has become common in young adults in recent years. Adolescents are characterized by a compulsive tendency to distinguish themselves from the rest; differences in clothes, hairstyle, or "decorative" details are used to this effect, based on highly-diverse criteria. Dental health-care professionals need to be aware of the procedures and risks involved with oral piercings and the social and psychological reasons that lead people to engage in this practice, regardless of the risks. The present article addresses oral mutilation practices, specifically from the oral health perspective, as it is of concern to dental professionals due to the health risks and oral complications associated with such practices. The various oral ornaments, piercing sites, and their implications, orally, as well as systemically, have been discussed. © 2011 Blackwell Publishing Asia Pty Ltd.

78 FR 78808 - Proposed Flood Elevation Determinations for Pierce County, Washington, and Incorporated Areas

Science.gov (United States)

2013-12-27

...-2013-0002; Internal Agency Docket No. FEMA-B-7748] Proposed Flood Elevation Determinations for Pierce... proposed rule concerning proposed flood elevation determinations for Pierce County, Washington, and... sources in Pierce County, Washington. On April 16, 2012, FEMA published a proposed rulemaking at 77 FR...

Oral and facial piercings: a case series and review of the literature.

Science.gov (United States)

López-Jornet, Pía; Navarro-Guardiola, Cristina; Camacho-Alonso, Fabio; Vicente-Ortega, Vicente; Yánez-Gascon, Josefa

2006-07-01

Piercing is popular among young people, who view this practice as a sign of marginality, beauty, or group identity. This study is performed on healthy individuals with oral and facial piercings. Seventy oral and facial piercings were evaluated (17 in the tongue, 13 in the lower lip, 18 in the nostril, 7 in the eyebrow, and 15 in the ear). A specifically designed protocol was used to assess possible complications (inflammatory reactions, pain, dental alterations). Nonparametric tests were used for the statistical analysis of the results. The general complications recorded comprised pain (60% of cases), inflammatory reactions (34.3%), bleeding (24%), dental fractures or fissures (20%), and gingival damage (26.7%). Tongue piercing is associated with pain, inflammatory reactions, and dental problems.

Features of Bayou Choctaw SPR caverns and internal structure of the salt dome.

Energy Technology Data Exchange (ETDEWEB)

Munson, Darrell E.

2007-07-01

The intent of this study is to examine the internal structure of the Bayou Choctaw salt dome utilizing the information obtained from graphical representations of sonar survey data of the internal cavern surfaces. Many of the Bayou Choctaw caverns have been abandoned. Some existing caverns were purchased by the Strategic Petroleum Reserve (SPR) program and have rather convoluted histories and complex cavern geometries. In fact, these caverns are typically poorly documented and are not particularly constructive to this study. Only two Bayou Choctaw caverns, 101 and 102, which were constructed using well-controlled solutioning methods, are well documented. One of these was constructed by the SPR for their use while the other was constructed and traded for another existing cavern. Consequently, compared to the SPR caverns of the West Hackberry and Big Hill domes, it is more difficult to obtain a general impression of the stratigraphy of the dome. Indeed, caverns of Bayou Choctaw show features significantly different than those encountered in the other two SPR facilities. In the number of abandoned caverns, and some of those existing caverns purchased by the SPR, extremely irregular solutioning has occurred. The two SPR constructed caverns suggest that some sections of the caverns may have undergone very regular solutioning to form uniform cylindrical shapes. Although it is not usually productive to speculate, some suggestions that point to the behavior of the Bayou Choctaw dome are examined. Also the primary differences in the Bayou Choctaw dome and the other SPR domes are noted.

Face Piercing (Body Art): Choosing Pleasure vs. Possible Pain and Posture Instability

Science.gov (United States)

Matheron, Eric; Kapoula, Zoï

2011-01-01

Piercings (body art, i.e., with jewelry) are more and more widespread. They can induce various complications such as infections, allergies, headaches, and various skin, cartilage, or dental problems, and represent a public health problem. We draw attention to possible side effects resulting from face piercing complications observed on four young adults such as eye misalignment, decreased postural control efficiency, and non-specific chronic back pain with associated comorbidity. We found that the origin was pierced jewelry on the face. Removing the jewelry restored eye alignment, improved postural control, and alleviated back pain in a lasting way. We suggest that pierced facial jewelry can disturb somaesthetic signals driven by the trigeminal nerve, and thus interfere with central integration processes, notably in the cerebellum and the vestibular nucleus involved in postural control and eye alignment. Facial piercings could induce sensory–motor conflict, exacerbate, or precipitate a pre-existing undetermined conflict, which leads pain and complaints. These findings are significant for health; further investigations would be of interest. PMID:21960975

UV-SPR biosensor for biomolecular interaction studies

Science.gov (United States)

Geiss, F. A.; Fossati, S.; Khan, I.; Gisbert Quilis, N.; Knoll, W.; Dostalek, J.

2017-05-01

UV surface plasmon resonance (SPR) for direct in situ detection of protein binding events is reported. A crossed relief aluminum grating was employed for diffraction coupling to surface plasmons as an alternative to more commonly used attenuated total reflection method. Wavelength interrogation of SPR was carried out by using transmission measurements in order to probe odorant-binding protein 14 (OBP14) of the honey bee (Apis mellifera). The native oxide layer on the top of an aluminum grating sensor chip allows for covalent coupling of protein molecules by using regular silane-based linkers. The probing of bound OBP14 protein at UV with confined field of surface plasmons holds potential for further studies of interaction with recently developed artificial fluorescent odorants.

Recent operational history of the new Sandia Pulsed Reactor III (SPR III)

International Nuclear Information System (INIS)

Schmidt, T.R.; Estes, B.F.; Reuscher, J.A.

1977-01-01

The Sandia Pulsed Reactor III (SPR III) is a fast-pulse research reactor which was designed and built at Sandia Laboratories and achieved criticality in August 1975. The reactor is now characterized and is in an operational configuration. The core consists of 18 fuel plates (258 kg fuel mass) of fully enriched uranium alloyed with 10 wt.% molybdenum. It is arranged in an annular configuration with an inside diameter of 17.78 cm, an outside diameter of 29.72 cm, and a height of 35.9 cm. The reactor core uses reflectors of copper and aluminum for control and an external bolting arrangement to secure the fuel plates. SPR III and SPR II are operated on an interchangeable basis using the same facility and control system. As of June 1977, SPR III has had over 240 operations with core temperatures up to 541 0 C

78 FR 4804 - Revision to the Washington State Implementation Plan; Tacoma-Pierce County Nonattainment Area

Science.gov (United States)

2013-01-23

... Washington State Implementation Plan; Tacoma- Pierce County Nonattainment Area AGENCY: Environmental... Tacoma-Pierce County nonattainment area for the 2006 fine particulate matter (PM 2.5 ) National Ambient... Rules.'' The updated PSCAA rules help implement the recommendations of the Tacoma-Pierce County Clean...

The prevalence of oral and peri-oral piercings in young adults: a systematic review.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2012-08-01

To determine the prevalence of oral and/or peri-oral piercings in young adults based on a systematic review of the available literature. The MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through April 2012 to identify appropriate studies. The prevalence of oral and/or peri-oral piercings was evaluated in the general population, as well as by gender and by anatomical site. An independent screening of 1711 unique titles and abstracts resulted in 13 publications that met the eligibility criteria. In total, 11 249 participants (mean age, 20.6 years) were questioned and/or examined for oral and/or peri-oral piercings. In the studies that provided information concerning the presence of oral and/or peri-oral piercings, the prevalence varied from 0.8% to 12%, resulting in a mean prevalence of 5.2%. When examined based on anatomical site, the most common sites were the tongue (a prevalence of 5.6%), followed by the lip (1.5%). Oral piercings were more prevalent in women (5.6%) than men (1.6%). Among the populations that were studied, oral and/or peri-oral piercings were observed in a relatively small percentage (5.2%) of young adults. The prevalence was approximately four times higher among females when compared with males. On the basis of the literature, the tongue was the most common oral site for a piercing. Dental care professionals are in an ideal position to offer information regarding safe piercings and to provide advice regarding oral hygiene, aftercare and possible complications. © 2012 John Wiley & Sons A/S.

76 FR 23708 - Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East...

Science.gov (United States)

2011-04-28

...-AA00 Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East... the Regional Water Rescue Exercise. Basis and Purpose The Pierce County, Washington, Department of... to read as follows: Sec. 165.T13-0251 Safety Zone; Pierce County Department of Emergency Management...

75 FR 32855 - Safety Zone; Pierce County, WA, Department of Emergency Management, Regional Water Exercise

Science.gov (United States)

2010-06-10

...-AA00 Safety Zone; Pierce County, WA, Department of Emergency Management, Regional Water Exercise AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Pierce County, Washington, Department of... immediate action is necessary to ensure safety of participants in the Pierce County Regional Water Rescue...

Pseudomonas aeruginosa necrotizing chondritis complicating high helical ear piercing case report: clinical and public health perspectives.

Science.gov (United States)

Sandhu, Amonpreet; Gross, Melissa; Wylie, John; Van Caeseele, Paul; Plourde, Pierre

2007-01-01

Auricular or high helical ear piercing is an increasingly widespread fashion trend that is associated with an increased risk of potentially serious post-piercing complications such as auricular perichondritis. An 11-year-old girl developed severe auricular perichondritis following piercing of the upper helical cartilage of her ear at a hairdressing salon. Four days post piercing, she returned to the same salon for a haircut during which the pierced site was manipulated. She presented to her family physician and was treated unsuccessfully with oral cephalexin. She was then referred to an infectious diseases consultant and received antipseudomonal intravenous antibiotics with subsequent resolution. She also required debridement and removal of necrotic cartilage. Public health investigation evaluated potential sources of infection including the piercing gun, disinfectant solutions, and hair cutting spray water bottles. Final culture results of the ear helical aspirate grew Pseudomonas aeruginosa. Pseudomonas aeruginosa was also cultured from one of the water bottles used to wet her hair during the haircut. Although the pseudomonal strains from the water bottle were different than the infecting one, this contamination presents a potential source of wound infection. Damage to the helical cartilage caused by the piercing gun may also have contributed to this infection. Initial empiric antibiotic therapy for these kinds of infection must include anti-pseudomonal coverage. Auricular or high helical ear piercing using a piercing gun is not recommended.

Buneman instability and Pierce instability in a collisionless bounded plasma

International Nuclear Information System (INIS)

Iizuka, Satoru; Saeki, Koichi; Sato, Noriyoshi; Hatta, Yoshisuke

1983-01-01

A systematic experiment is performed on the Buneman instability and the Pierce instability in a bounded plasma consisting of beam electrons and stationary ions. Current fluctuations are confirmed to be induced by the Buneman instability. On the other hand, the Pierce instability gives rise to a current limitation. The phenomena are well explained by Mikhailovskii's theory taking account of ion motion in a bounded plasma. (author)

Body piercing: more than skin deep.

Science.gov (United States)

Hogan, L; Armstrong, M L

2009-09-01

Young adult populations (18-25 years of age) throughout the world have latched onto the mainstream trend of body piercing. Best health care practices for these individuals involves the knowledge of proper procedural techniques, postsite care, common complications, and treatment modalities.

Obituary: A. Keith Pierce, 1918 - 2005

Science.gov (United States)

Livingston, William Charles

2006-12-01

A. Keith Pierce was a solar astronomer who will be remembered for bringing the physics lab to the telescope and for his design of the world's largest solar telescope, the 1.5-meter McMath Telescope on Kitt Peak in Arizona. Born in Lincoln, Nebraska, he died of cancer in Tucson on 11 March 2005. He was eighty-six. His father, Tracy Pierce, had gone to graduate school in Berkeley, California, with a major in mathematics and a minor in astronomy. Fellow students of his class included Seth Nicholson and Donald Shane, people who were later to influence young Keith's life. Tracy Pierce received an appointment as an instructor, later Professor, of mathematics at the University of Nebraska in Lincoln. In his spare time dad Tracy became something of a telescope nut, following "the bible" —Albert Ingall's A.T.M (Amateur Telescope Making). His enthusiasm rubbed off on his son. Seth Nicholson, who became a famous Mt. Wilson Observatory astronomer, and Donald Shane from Berkeley, both stayed at the Pierce home while on their Sigma Xi lecture tours. After two years at Lincoln, followed by two more at Berkeley, Keith had earned his bachelor's degree in astronomy. During World War II, Dr. Shane became personnel director at the E.O. Lawrence Radiation Lab and arranged for Keith to work there at the cyclotron. A crash program to produce U235 from U238 was under way. At a crucial point in 1942 the cyclotron turned out the sought-after material. Much celebration ensued among the Rad Lab leaders. During this gala, Keith was on the night-shift and pretty much on his own. It was then that he turned a valve to the right, when left was called for, and the entire system went down. Shortly thereafter he was sent to Oak Ridge for the duration of the war. He cannot have been thought of badly, however, because he was invited to the Trinity test in New Mexico. (He didn't go because of the pending birth of his first son, John.) The year 1945 found Keith back in Berkeley working on his Ph

Surface Plasmon Resonance (SPR Phenomenon of the Oxidizing and Reducing Polypyrrole

Directory of Open Access Journals (Sweden)

Nurlaila Rajabiah

2016-12-01

Full Text Available Surface Plasmon Resonance (SPR phenomenon of the oxidizing and reducing polypyrrole (PPy have been observed using a modified Au/PPy Kretschmann configuration. The observation was carried out through simulation Winspall 3.02 software and compared with some experimental data refractive index (n, absorbance index (, and thickness (τ reported in other literatures with spectroscopy ellipsometry. This simulation assumed that the SPR system use BK-7 halfcylinder prism (n= 1,515 and the laser beam was generated by HeNe (λ= 632,8 nm. The result showed that the optimum layer thickness of polypyrrole with neutral electrolyte solution in the reduction state is of about 20 nm. The polypyrrole with an acid solution in the oxidation state showed that the reflectivity curve is sharper and the width of the curve is smaller than the neutral electrolyte solution in the reduction state with the SPR angle of about 46,810 and the reflectivity value of about 0,217. Polypyrrole in a state of oxidation and reduction, related to the absorption, film thickness, and dielectric constant of materials, affected to the SPR angle shift and dip curve

Self-perception of fracture risk: what can it tell us?

Science.gov (United States)

Litwic, A E; Compston, J E; Wyman, A; Siris, E S; Gehlbach, S H; Adachi, J D; Chapurlat, R; Díez-Pérez, A; LaCroix, A Z; Nieves, J W; Netelenbos, J C; Pfeilschifter, J; Rossini, M; Roux, C; Saag, K G; Silverman, S; Watts, N B; Greenspan, S L; March, L; Gregson, C L; Cooper, C; Dennison, E M

2017-12-01

In this study, we report that self-perception of fracture risk captures some aspect of fracture risk not currently measured using conventional fracture prediction tools and is associated with improved medication uptake. It suggests that adequate appreciation of fracture risk may be beneficial and lead to greater healthcare engagement and treatment. This study aimed to assess how well self-perception of fracture risk, and fracture risk as estimated by the fracture prediction tool FRAX, related to fracture incidence and uptake and persistence of anti-osteoporosis medication among women participating in the Global Longitudinal study of Osteoporosis in Women (GLOW). GLOW is an international cohort study involving 723 physician practices across 10 countries in Europe, North America and Australia. Aged ≥ 55 years, 60,393 women completed baseline questionnaires detailing medical history, including co-morbidities, fractures and self-perceived fracture risk (SPR). Annual follow-up included self-reported incident fractures and anti-osteoporosis medication (AOM) use. We calculated FRAX risk without bone mineral density measurement. Of the 39,241 women with at least 1 year of follow-up data, 2132 (5.4%) sustained an incident major osteoporotic fracture over 5 years of follow-up. Within each SPR category, risk of fracture increased as the FRAX categorisation of risk increased. In GLOW, only 11% of women with a lower baseline SPR were taking AOM at baseline, compared with 46% of women with a higher SPR. AOM use tended to increase in the years after a reported fracture. However, women with a lower SPR who were fractured still reported lower AOM rates than women with or without a fracture but had a higher SPR. These results suggest that SPR captures some aspect of fracture risk not currently measured using conventional fracture prediction tools and is also associated with improved medication uptake.

The Consequences of Tongue Piercing on Oral and Periodontal Tissues

Science.gov (United States)

Sakellari, Dimitra

2014-01-01

This paper is discussing the potential consequences that may arise by the implementation of piercing in the oral cavity and is also categorizing the consequences according to their extent and severity. Furthermore, this paper is reviewing some possible oral hygiene methods that can prove to be auxiliary in decreasing the potential complications arising from oral piercing. This literature review is based on articles published from 1985 to 2012. PMID:24616814

SPR based immunosensor for detection of Legionella pneumophila in water samples

Science.gov (United States)

Enrico, De Lorenzis; Manera, Maria G.; Montagna, Giovanni; Cimaglia, Fabio; Chiesa, Maurizio; Poltronieri, Palmiro; Santino, Angelo; Rella, Roberto

2013-05-01

Detection of legionellae by water sampling is an important factor in epidemiological investigations of Legionnaires' disease and its prevention. To avoid labor-intensive problems with conventional methods, an alternative, highly sensitive and simple method is proposed for detecting L. pneumophila in aqueous samples. A compact Surface Plasmon Resonance (SPR) instrumentation prototype, provided with proper microfluidics tools, is built. The developed immunosensor is capable of dynamically following the binding between antigens and the corresponding antibody molecules immobilized on the SPR sensor surface. A proper immobilization strategy is used in this work that makes use of an important efficient step aimed at the orientation of antibodies onto the sensor surface. The feasibility of the integration of SPR-based biosensing setups with microfluidic technologies, resulting in a low-cost and portable biosensor is demonstrated.

The Pierce diode with an external circuit. I. Oscillations about nonuniform equilibria

International Nuclear Information System (INIS)

Lawson, W.S.

1989-01-01

The nonuniform (nonlinear) equilibria of the classical (short circuit) Pierce diode and the extended (series RLC external circuit) Pierce diode are described, and the spectrum of oscillations (stable and unstable) about these equilibria are worked out. It is found that only the external capacitance alters the equilibria, though all elements alter the spectrum. In particular, the introduction of an external capacitor destabilizes some equilibria that are marginally stable without the capacitor. Computer simulations are performed to test the theoretical predictions for the case of an external capacitor only. It is found that most equilibria are correctly predicted by theory, but that the continuous set of equilibria of the classical Pierce diode at Pierce parameters (α=ω/sub pL//v 0 ) that are multiples of 2π are not observed. This appears to be a failure of the simulation method under the rather singular conditions rather than a failure of the theory

Daith Piercing in a Case of Chronic Migraine: A Possible Vagal Modulation

Directory of Open Access Journals (Sweden)

Angelo Cascio Rizzo

2017-11-01

Full Text Available Daith piercing is an ear piercing located at the crus of the helix, bilaterally. It is getting great consent on social media as alternative treatment in chronic migraine. No data about its efficacy and action are available in scientific literature so far. We present the case of a 54-year-old male patient suffering from refractory chronic migraine with medication-overuse, who substantially improved after bilateral ear daith piercing. His migraine was refractory to symptomatic as well as prophylactic therapies. He used to treat headaches with up to five symptomatic drugs per attack and had attempted several pharmacological preventive therapies, including Onabotulinumtoxin A. He also underwent detoxification treatments with intravenous steroids and diazepam, without durable benefit. At the time of daith piercing, the headache-related disability measures showed a HIT-6 score of 64, a MIDAS-score of 70, and a 11-point Box scale of 5. On his own free will, he decided to get a “daith piercing.” After that, he experienced a reduction of migraine attacks, which became very rare, and infrequent, less disabling episodes of tension-type headache (HIT-6 score of 56; MIDAS score of 27, 11-point Box scale of 3. Painkiller assumption has much decreased: he takes only one tablet of indomethacin 50 mg to treat tensive headaches, about four times per month. Beyond a placebo effect, we can speculate a vagal modulation as the action mechanism of daith piercing: a nociceptive sensory stimulus applied to trigeminal and vagal areas of the ear can activate ear vagal afferents, which can modulate pain pathways by means of projections to the caudal trigeminal nucleus, to the locus coeruleus and to the nucleus raphe magnus. Currently, daith piercing cannot be recommended as migraine treatment because of the lack of scientific evidence, the unquantified rate of failure and the associated risks with insertion. However, given the increasing but anecdotal evidence, we

Circuit effects on pierce instabilities, and double-layer formation

International Nuclear Information System (INIS)

Raadu, M.A.; Silevitch, M.B.

1982-11-01

The role of the Pierce instability in the formation of double layers is considered and compared with that of the Buneman instability. Pierce instabilities have been identified in a double-layer experiment, where they lead to ion trapping. Here the effects of external circuit elements are considered. In the case of immobile ions the onset criteria are unaffected, but in the unstable range the growth rate is reduced by the external impedance. Required experimental values of the circuit elements are estimated. The possible relevance to computer simulations is noted. (Authors)

Dehumidification effects in the superheated region (SPR) of a direct expansion (DX) air cooling coil

International Nuclear Information System (INIS)

Xia Liang; Chan Mingyin; Deng Shiming; Xu Xiangguo

2009-01-01

A DX air cooling coil may normally be assumed to have two regions in its refrigerant side, according to refrigerant status, a two-phase region (TPR) and a superheated region (SPR). Dry air side surface of the SPR in a DX air cooling coil has been normally assumed in lumped-parameter mathematical models previously developed without however being validated. Therefore, an experimental study has been carried out to examine such an assumption under different operating conditions. The experimental results suggested that the air side surface of the SPR in a DX air cooling coil was either fully or partially wet under all experimental conditions and assuming dry air side of the SPR could lead to an underestimated total amount of water vapor condensed on the entire DX coil surface. Therefore, it is recommended that the assumption of dry air side in a SPR be no longer used in future lumped-parameter models to be developed for improved modeling accuracy.

75 FR 14467 - Notice of Inventory Completion: Pierce College District, Lakewood, WA, and Thomas Burke Memorial...

Science.gov (United States)

2010-03-25

... DEPARTMENT OF THE INTERIOR National Park Service Notice of Inventory Completion: Pierce College... completion of an inventory of human remains in the control of the Pierce College District, Lakewood, WA, and...), University of Washington, Seattle, WA. The human remains were most likely removed from Gig Harbor, Pierce...

In Vitro Study on the Adhesion and Colonization of Candida Albicans on Metal and Acrylic Piercings

Directory of Open Access Journals (Sweden)

Stamenov N.

2016-03-01

Full Text Available Oral/perioral piercing may provide an ideal environment for adhesion and colonization of microorganisms. The aim of this study is to perform an “in vitro” research on the capabilities of adhesion of Candida albicans on oral piercings made of plastic and metal. Acrylic and metal piercings were incubated with Candida albicans and then were observed using scanning electron microscopy under different magnifications. A lot of irregularities and roughness were observed on the surface of the plastic piercing unlike the surface of the metal one, which is not so rough. Nevertheless, the number of Candida albicans colonies was considerably larger on the scanned metal surface in comparison to the plastic surface. In vitro the metal surface of the piercing creates better environment for the adhesion and colonization of microorganisms than the acrylic. This could be attributed to the electrostatic forces that most likely attract Candida albicans to the metal piercing in the early stages of biofilm formation.

Face piercing (body art: choosing pleasure vs. possible pain and posture instability

Directory of Open Access Journals (Sweden)

Eric eMatheron

2011-09-01

Full Text Available Piercings (body art, i.e. with jewelry are more and more widespread. They can induce various complications such as infections, allergies, headaches, and various skin, cartilage, or dental problems which will lead to economic effects on health-care systems. We draw attention to other possible side effects resulting from face piercing complications such as eye misalignment, decreased postural control efficiency, and nonspecific chronic back pain. We found that the origin was pierced jewelry on the face. Removing the jewelry restored eye alignment, improved postural control, and alleviated back pain in a lasting way. This observation is important for health; further investigations would be of interest.

Process Monitoring and Fault Diagnosis for Piercing Production of Seamless Tube

Directory of Open Access Journals (Sweden)

Dong Xiao

2016-01-01

Full Text Available With the development of modernization, the application of seamless tube becomes widespread. As the first process of seamless tube, piercing is vital for the quality of the tube. The solid round billet will be transformed into a hollow shell after the piercing process. The defects of hollow shell cannot be cleared in the following process, so a monitoring model for the quality of the hollow shell is important. But the piercing process is very complicated, and a mechanism model is difficult to build between the qualities of the hollow shell and measurement variables. Furthermore, an intelligent model is needed. We established two piercing process monitoring and fault diagnosis models based on the multiway principal component analysis (MPCA model and the multistage MPCA model, respectively, and furthermore we made a comparison between these two concepts. We took three ways to divide the period based on process, K-means, and GA, respectively. Simulation experiments have shown that the multistate MPCA method has advantage over the MPCA method and the model based on the genetic algorithm (GA can monitor the process effectively and detect the faults.

Enhancement in sensitivity of graphene-based zinc oxide assisted bimetallic surface plasmon resonance (SPR) biosensor

Science.gov (United States)

Kumar, Rajeev; Kushwaha, Angad S.; Srivastava, Monika; Mishra, H.; Srivastava, S. K.

2018-03-01

In the present communication, a highly sensitive surface plasmon resonance (SPR) biosensor with Kretschmann configuration having alternate layers, prism/zinc oxide/silver/gold/graphene/biomolecules (ss-DNA) is presented. The optimization of the proposed configuration has been accomplished by keeping the constant thickness of zinc oxide (32 nm), silver (32 nm), graphene (0.34 nm) layer and biomolecules (100 nm) for different values of gold layer thickness (1, 3 and 5 nm). The sensitivity of the proposed SPR biosensor has been demonstrated for a number of design parameters such as gold layer thickness, number of graphene layer, refractive index of biomolecules and the thickness of biomolecules layer. SPR biosensor with optimized geometry has greater sensitivity (66 deg/RIU) than the conventional (52 deg/RIU) as well as other graphene-based (53.2 deg/RIU) SPR biosensor. The effect of zinc oxide layer thickness on the sensitivity of SPR biosensor has also been analysed. From the analysis, it is found that the sensitivity increases significantly by increasing the thickness of zinc oxide layer. It means zinc oxide intermediate layer plays an important role to improve the sensitivity of the biosensor. The sensitivity of SPR biosensor also increases by increasing the number of graphene layer (upto nine layer).

Septic shock after posterior spinal arthrodesis on a patient with Scheuermann kyphosis and multiple body piercings.

Science.gov (United States)

Tsirikos, Athanasios I; Subramanian, Ashok Sridhara

2011-10-15

A case report. We report septic shock as postoperative complication following an instrumented posterior spinal arthrodesis on a patient with multiple body piercings. The management of this potentially catastrophic complication and outcome of treatment is been discussed. Body piercing has become increasingly more common because of change in culture or as a fashion statement. This has been associated with local or generalized ill effects including tissue injury, skin and systemic infections, and septic shock. There is no clear guideline pathway regarding removal and reinsertion of body piercings in patients who undergo major surgery. Complications following orthopedic or spinal procedures associated with body piercing have not been reported. We reviewed the medical notes and radiographs of an adolescent patient with Scheuermann kyphosis and multiple body piercings who underwent a posterior spinal arthrodesis and developed septic shock. Septic shock developed on postoperative day 2 after reinsertion of all piercings following the patient's request. The patient became systemically very unwell and required intensive medical management, as well as a total course of antibiotics of 3 months. The piercings remained in situ. She did not develop a wound infection despite the presence of bacteremia and spinal instrumentation. The patient had no new piercings subsequent to her deformity procedure. Two and a half years after spinal surgery she reported no medical problems, had a balanced spine with no loss of kyphosis correction and no evidence of nonunion or recurrence of deformity. The development of septic shock as a result of piercing reinsertion in the postoperative period has not been previously reported. This is an important consideration to prevent potentially life-threatening complications following major spinal surgery.

Reaksi Radang pada Lidah dengan Tongue Piercing (Kajian in vivo pada Lidah Tikus Jantan Sprague dawley

Directory of Open Access Journals (Sweden)

Feby Aryani

2015-10-01

Full Text Available Today tongue piercing has become increasingly popular in the society. Several case reports associated with tongue piercing have presented various complications, such as tooth fracture, viral infection (HIV, Hepatitis B and C, herpes simplex, Epstein Barr, fungal infection (Candida spp, pain altered taste, edema, paresthesis, gingival recession, prolonged bleeding, contact dermatitis. However, there is no scientific evidence to reveal hispathological change in tongue piercing. The aim of this study is to investigate the inflammation response to tongue piercing in Spraque Dawley rats. Eighteen Sprague Dawley rats were divided into one control group of 3 untreated rats and three experimental groups of 5 rats each, according to the duration of tongue piercing until the end of 1st week (A, 6th week (B and 12th week (C. At the end of treatments, the rats were anesthetized and sacrifices. Paraffin embedded tongue specimens were prepared for histological examination with H&E stainig. The number of inflammatory cells (PMN leukocytes, lymphocytes, macrophages was counted under light microscope. All experimental procedures were carried out under approval of study protocol by the Health and Medical Research Ethics Committee, Faculty of Medicine, Gadjah Mada University, Yogyakarta. The results of this study indicated that the number of PMN leukocytes, lymphocytes, and macrophages was increasing to the 1st week after tongue piercing. The number of lymphocytes and macrohpages was still increasing after 6th and 12th weeks of piercing, but the bumber of PMN leukocytes, lymphocytes, and macrophages between the groups of 1st, 6th, and 12th weeks after piercing. It was concluded that tongue piercing induce inflammatory response for 12 weeks in Sprague Dawley rats.

Optimization of SPR signals: Monitoring the physical structures and refractive indices of prisms

Science.gov (United States)

Maisarah Mukhtar, Wan; Halim, Razman Mohd; Hassan, Hazirah

2017-11-01

Surface plasmon resonance (SPR) can only be achieved if sufficient energy is provided at the boundary between metal and dielectric. An employment of prism as a light coupler by using Kretschmann configuration is one of the alternative for the production of adequate energy to be generated as surface plasmon polaritons (SPP). This work is carried out to investigate the effect of physical structure of the prism and its refractive index to the excitation of SPPs. A 50nm gold thin metal film with dielectric constant of ɛ=-12.45i+1.3 was deposited on the hypotenuse surface of the prisms. The physical structures of the prisms were varied such as triangular, conical, hemispherical and half cylindrical. These prisms were classified into two types of refractive indices (RI), namely n=1.51(type BK7) and n=1.77(type SF11). Based on SPR curve analyses, we discovered that strong SPR signals which consist of 82.98% photons were excited as SPPs can be obtained by using type-BK7 prism with physical structures of hemispherical or half cylindrical. From the view of selectivity ability as sensors, the usage of type-SF11 prisms (half cylindrical and hemispherical) able to enhance this impressive feature in which sharp SPR curves with small FWHM values were obtained. In conclusion, apart from properties of thin film materials, the physical structure of prisms and their RI values play crucial roles to obtain optimum SPR signal. High sensitivity SPR sensor can be established with the appointment of type-BK7 prisms (hemispherical or half cylindrical shape) as light couplers.

Optimization of SPR signals: Monitoring the physical structures and refractive indices of prisms

Directory of Open Access Journals (Sweden)

Mukhtar Wan Maisarah

2017-01-01

Full Text Available Surface plasmon resonance (SPR can only be achieved if sufficient energy is provided at the boundary between metal and dielectric. An employment of prism as a light coupler by using Kretschmann configuration is one of the alternative for the production of adequate energy to be generated as surface plasmon polaritons (SPP. This work is carried out to investigate the effect of physical structure of the prism and its refractive index to the excitation of SPPs. A 50nm gold thin metal film with dielectric constant of ɛ=-12.45i+1.3 was deposited on the hypotenuse surface of the prisms. The physical structures of the prisms were varied such as triangular, conical, hemispherical and half cylindrical. These prisms were classified into two types of refractive indices (RI, namely n=1.51(type BK7 and n=1.77(type SF11. Based on SPR curve analyses, we discovered that strong SPR signals which consist of 82.98% photons were excited as SPPs can be obtained by using type-BK7 prism with physical structures of hemispherical or half cylindrical. From the view of selectivity ability as sensors, the usage of type-SF11 prisms (half cylindrical and hemispherical able to enhance this impressive feature in which sharp SPR curves with small FWHM values were obtained. In conclusion, apart from properties of thin film materials, the physical structure of prisms and their RI values play crucial roles to obtain optimum SPR signal. High sensitivity SPR sensor can be established with the appointment of type-BK7 prisms (hemispherical or half cylindrical shape as light couplers.

Språkpolitikk og (usynleggjering i det semiotiske landskapet på Universitetet i Tromsø

Directory of Open Access Journals (Sweden)

Åse Mette Johansen

2013-01-01

Full Text Available I denne artikkelen analyserer vi det semiotiske landskapet som famnar om og er ein del av staden Universitetet i Tromsø (UiT, inkludert Universitetssykehuset Nord-Norge (UNN. Analysen bygger på eit todelt datamateriale som om­fattar fotografi frå universitets­området i tillegg til relevante dokument om språk­lovgjeving og andre offisielle vedtak om språkbruk. Dei aktuelle språka er norsk (bokmål og nynorsk, nord­samisk, engelsk og kvensk/finsk. I tillegg blir ymse slag visuelle symbol under­kasta analyse. Også kunstnarleg utsmykking blir kort omtala. Vi viser korleis synleggjering av ulike språk på UiT er eit resultat av språkpolitikk på ulike nivå, men også er påverka av meir implisitte faktorar som lokale og nasjonale språkhierarki og, ikkje minst, konstruksjonen av ein regional institusjons­identitet som blir uttrykt gjennom det semiotiske landskapet meir generelt. Som ramme rundt denne analysen gjer vi dessutan ein ekskurs til det som i 2011 utløyste ein intens debatt i Tromsø kommune, nemleg spørsmålet om kommunen burde eller ikkje burde bli innlemma i forvaltningsområdet for samisk språk. Den måten denne problemstillinga er blitt takla på av politiske organ i kommunen, og ikkje minst debatten om den i medieoffentlegheita, står i skarp kontrast til den fleirspråklege freden som omgjev universitetet og universitets­sjukehuset.

Experimental results for characterization of a tapered plastic optical fiber sensor based on SPR

Science.gov (United States)

Cennamo, N.; Galatus, R.; Zeni, L.

2015-05-01

The experimental results obtained with two different Plastic Optical Fiber (POF) geometries, tapered and not-tapered, for a sensor based on Surface Plasmon Resonance (SPR) are presented. SPR is used for determining the refractive index variations at the interface between a gold layer and a dielectric medium (aqueous medium). In this work SPR sensors in POF configurations, useful for bio-sensing applications, have been realized for the optimization of the sensitivity and experimentally tested. The results show as the sensitivity increases with the tapered POF configuration, when the refractive index of aqueous medium increases.

Application of Hard Coatings for Improved Tribological Performance of Blanking and Piercing Tools

DEFF Research Database (Denmark)

Podgornik, B.; Zajec, B.; Bay, Niels

2010-01-01

The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing applicat...

Finite ion velocity effects on the stability of Pierce-like diodes

International Nuclear Information System (INIS)

Kolinsky, H.; Schamel, H.

1994-01-01

The stability of Pierce-like plasma diodes is investigated for arbitrary ion injection velocities. A recently developed integral formalism that accounts for ion dynamical effects is applied to derive a generalized dispersion relation for electrostatic perturbations. Its evaluation exhibits several new features, such as the appearance of growing oscillatory modes, which become Pierce--Buneman modes in the limit of initially resting ions, and of weakly damped oscillatory modes, which become undamped ion plasma oscillations in this limit. The stability of this bounded plasma system is shown to be controlled by the new control parameter at signga=α(1+at signgm) 1/2 , where α is the Pierce parameter and at signgm≡m ev 2 e0 /m iv 2 i0 the ratio of electron and ion kinetic energy at the emitter

Control electron beam oscillation regimes in Pierce diode with overcritical current

International Nuclear Information System (INIS)

Rempen, I.S.; Khramov, A.E.

2001-01-01

The effect of the delayed feedback on the complex oscillation regimes in the electron flux with the overcritical current in the Pierce diode is studied. The possibility of controlling the oscillation regimes through changing the feedback parameters is shown. The finite-dimensional model, describing the behavior of the electron flux in the Pierce diode hydrodynamic model, is constructed. Its behavior under the effect of the delayed feedback is studied [ru

Effekten af sprøjtemiddelafdrift på buske og træer i læhegn

DEFF Research Database (Denmark)

Kjær, C.; Strandberg, M. T.; Erlandsen, M.

Forsøg med sprøjtning af tjørn med ukrudtsmidlet metsul-furon-methyl har vist effekter både i samme år som sprøjtning og året efter. Sprøjtemidlet, som anvendes til bekæmpelse af bredbladet ukrudt i kornmarker, kan formentlig ved afdrift til markomgivelser som hegn og skovkanter medføre en længer...

People with Multiple Tattoos and/or Piercings Are Not at Increased Risk for HBV or HCV in The Netherlands

Science.gov (United States)

Urbanus, Anouk T.; van den Hoek, Anneke; Boonstra, Albert; van Houdt, Robin; de Bruijn, Lotte J.; Heijman, Titia; Coutinho, Roel A.; Prins, Maria

2011-01-01

Background Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in the Netherlands who acquired their tattoos and piercings in the Netherlands and/or abroad. Methods Tattoo artists, piercers, and people with multiple tattoos and/or piercings were recruited at tattoo conventions, shops (N = 182), and a biannual survey at our STI-outpatient clinic (N = 252) in Amsterdam. Participants were interviewed and tested for anti-HBc and anti-HCV. Determinants of HBV and HCV infections were analysed using logistic regression analysis. Results The median number of tattoos and piercings was 5 (IQR 2–10) and 2 (IQR 2–4), respectively. Almost 40% acquired their tattoo of piercing abroad. In total, 18/434 (4.2%, 95%CI: 2.64%–6.46%) participants were anti-HBc positive and 1 was anti-HCV positive (0.2%, 95%CI: 0.01%–1.29%). Being anti-HBc positive was independently associated with older age (OR 1.68, 95%CI: 1.03–2.75 per 10 years older) and being born in an HBV-endemic country (OR 7.39, 95%CI: 2.77–19.7). Tattoo- and/or piercing-related variables, like having a tattoo or piercing in an HBV endemic country, surface percentage tattooed, number of tattoos and piercings etc., were not associated with either HBV or HCV. Conclusions We found no evidence for an increased HBV/HCV seroprevalence among persons with multiple tattoos and/or piercings, which might be due to the introduction of hygiene guidelines for tattoo and piercing shops in combination with the low observed prevalence of HBV/HCV in the general population. Tattoos and/or piercings, therefore, should not be considered risk factors for HBV/HCV in the Dutch population. These findings imply the importance of implementation of hygiene guidelines in other countries. PMID

People with multiple tattoos and/or piercings are not at increased risk for HBV or HCV in The Netherlands.

Science.gov (United States)

Urbanus, Anouk T; van den Hoek, Anneke; Boonstra, Albert; van Houdt, Robin; de Bruijn, Lotte J; Heijman, Titia; Coutinho, Roel A; Prins, Maria

2011-01-01

Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in The Netherlands who acquired their tattoos and piercings in The Netherlands and/or abroad. Tattoo artists, piercers, and people with multiple tattoos and/or piercings were recruited at tattoo conventions, shops (N = 182), and a biannual survey at our STI-outpatient clinic (N = 252) in Amsterdam. Participants were interviewed and tested for anti-HBc and anti-HCV. Determinants of HBV and HCV infections were analysed using logistic regression analysis. The median number of tattoos and piercings was 5 (IQR 2-10) and 2 (IQR 2-4), respectively. Almost 40% acquired their tattoo of piercing abroad. In total, 18/434 (4.2%, 95%CI: 2.64%-6.46%) participants were anti-HBc positive and 1 was anti-HCV positive (0.2%, 95%CI: 0.01%-1.29%). Being anti-HBc positive was independently associated with older age (OR 1.68, 95%CI: 1.03-2.75 per 10 years older) and being born in an HBV-endemic country (OR 7.39, 95%CI: 2.77-19.7). Tattoo- and/or piercing-related variables, like having a tattoo or piercing in an HBV endemic country, surface percentage tattooed, number of tattoos and piercings etc., were not associated with either HBV or HCV. We found no evidence for an increased HBV/HCV seroprevalence among persons with multiple tattoos and/or piercings, which might be due to the introduction of hygiene guidelines for tattoo and piercing shops in combination with the low observed prevalence of HBV/HCV in the general population. Tattoos and/or piercings, therefore, should not be considered risk factors for HBV/HCV in the Dutch population. These findings imply the importance of implementation of hygiene guidelines in other countries.

People with multiple tattoos and/or piercings are not at increased risk for HBV or HCV in The Netherlands.

Directory of Open Access Journals (Sweden)

Anouk T Urbanus

Full Text Available BACKGROUND: Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in The Netherlands who acquired their tattoos and piercings in The Netherlands and/or abroad. METHODS: Tattoo artists, piercers, and people with multiple tattoos and/or piercings were recruited at tattoo conventions, shops (N = 182, and a biannual survey at our STI-outpatient clinic (N = 252 in Amsterdam. Participants were interviewed and tested for anti-HBc and anti-HCV. Determinants of HBV and HCV infections were analysed using logistic regression analysis. RESULTS: The median number of tattoos and piercings was 5 (IQR 2-10 and 2 (IQR 2-4, respectively. Almost 40% acquired their tattoo of piercing abroad. In total, 18/434 (4.2%, 95%CI: 2.64%-6.46% participants were anti-HBc positive and 1 was anti-HCV positive (0.2%, 95%CI: 0.01%-1.29%. Being anti-HBc positive was independently associated with older age (OR 1.68, 95%CI: 1.03-2.75 per 10 years older and being born in an HBV-endemic country (OR 7.39, 95%CI: 2.77-19.7. Tattoo- and/or piercing-related variables, like having a tattoo or piercing in an HBV endemic country, surface percentage tattooed, number of tattoos and piercings etc., were not associated with either HBV or HCV. CONCLUSIONS: We found no evidence for an increased HBV/HCV seroprevalence among persons with multiple tattoos and/or piercings, which might be due to the introduction of hygiene guidelines for tattoo and piercing shops in combination with the low observed prevalence of HBV/HCV in the general population. Tattoos and/or piercings, therefore, should not be considered risk factors for HBV/HCV in the Dutch population. These findings imply the importance of implementation of hygiene guidelines in other countries.

Mycobacterium fortuitum and anaerobic breast abscess following nipple piercing: case presentation and review of the literature.

Science.gov (United States)

Bengualid, Victoria; Singh, Veera; Singh, Herpreet; Berger, Judith

2008-05-01

Body piercing has become increasingly prevalent. We describe a case of breast infection with combined mycobacteria and anaerobe following nipple piercing, and review the literature. A 17-year-old female developed a breast abscess 4 months after nipple piercing. Cultures grew Prevotalla melangenica and Mycobacterium fortuitum. She required drainage and antibiotic treatment. Three months into her treatment she stopped her medications, relapsed, and required drainage. Two months later, on antimycobacteria therapy, her wound is healing. Review of the infectious complications of nipple piercing yielded 12 cases, 5 of which had a foreign body. The pathogens isolated (coagulase negative staphylococcus, mycobacteria, streptococcus, anaerobe, and gordonia) are not the usual organisms to be isolated from a breast abscess. This could result from reporting bias or the presence of a foreign body, the nipple ring. The three cases of mycobacteria, in addition to ours, are reviewed. The average age is 22 years. Three to 9 months elapsed between piercing and infection. All cases required drainage. Antimycobacteria therapy was used in three of the four cases for 10 days to 6 months. With the increasing prevalence of body piercing, it is important to document and report infections. We describe a breast abscess following nipple piercing with combined anaerobic and a mycobacterial pathogens. This underscores the need for obtaining cultures including anaerobes and mycobacteria.

Triple inverter pierce oscillator circuit suitable for CMOS

Science.gov (United States)

Wessendorf,; Kurt, O [Albuquerque, NM

2007-02-27

An oscillator circuit is disclosed which can be formed using discrete field-effect transistors (FETs), or as a complementary metal-oxide-semiconductor (CMOS) integrated circuit. The oscillator circuit utilizes a Pierce oscillator design with three inverter stages connected in series. A feedback resistor provided in a feedback loop about a second inverter stage provides an almost ideal inverting transconductance thereby allowing high-Q operation at the resonator-controlled frequency while suppressing a parasitic oscillation frequency that is inherent in a Pierce configuration using a "standard" triple inverter for the sustaining amplifier. The oscillator circuit, which operates in a range of 10 50 MHz, has applications for use as a clock in a microprocessor and can also be used for sensor applications.

Numerical simulations of semi-armor-piercing warhead penetrating aircraft carrier target

OpenAIRE

Dong Sangqaing; Cai Xinghui; Wang Guoliang; Gao Yunliang; Lu Jiangren

2015-01-01

FEM models of semi-armor-piercing warhead penetrating aircraft carrier deck are established, which are validated by related experimental data. Base on the models, the process of semi-armor-piercing warhead penetrating aircraft carrier deck with different incidence angles and attack angles are carried out. The results show that incidence angles have no remarkable influence on penetration capability of the projectile under the circumstance of zero attack angle. Ductility reaming damage mode and...

Enhancing the Lithium Storage Performance of Graphene/SnO2 Nanorods by a Carbon-Riveting Strategy.

Science.gov (United States)

Liu, Xianghong; Ma, Tiantian; Sun, Li; Xu, Yongshan; Zhang, Jun; Pinna, Nicola

2018-04-25

Graphene/metal oxide (MO) nanocomposites hold great promise for application as anodes in lithium-ion batteries (LIBs). However, the restacking of graphene during subsequent processing remains a challenge to overcome for enhanced lithium storage properties. Herein, the fabrication of sandwich-architecture carbon-riveted graphene/SnO 2 nanorods, in which the SnO 2 nanorods are confined in the nanospaces formed by the carbon layers on graphene, by a two-step hydrothermal process followed by thermal treatment, is reported. Electrochemical tests show that the carbon-riveted nanolayers significantly improve the lithium storage performance of graphene/SnO 2 . The nanocomposite displays a high reversible capacity of 815 mAh g -1 after 150 cycles at 100 mA g -1 and high cycling stability at 1000 mA g -1 . This work provides an efficient way to manipulate graphene/MO-based nanocomposites for LIBs with improved performance. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Tattooing and body piercing--experiences from public health infection surveillance by a public health office].

Science.gov (United States)

Heudorf, U; Kutzke, G; Seng, U

2000-04-01

Tattooing and piercing have become increasingly popular in recent years. Both methods involve several medical risks, including transmission of infectious diseases. There are many reports on wound infections as well as transmission of hepatitis and human immunodeficiency viruses etc. According to these facts special hygiene regulations for tattooing and piercing have been published in Germany. Based on these regulations the public health department of the city of Frankfurt am Main, Germany, carried out special hygiene controls in such studios, one a year. Special tattoo or piercing exhibitions were also controlled. Results are reported here. Studios for tattoos or piercing were informed about hygiene rules and annually controlled from 1995-1999, using a special check list on cleanliness in the studios, disinfection and sterilisation procedures etc. For permission of tattoo and piercing exhibitions special hygiene orders were made mandatory. During 1995-1997 the absolute number of complaints decreased from 20 to 9, in spite of the increasing number of tattoo studios in Frankfurt am Main (from 6 to 10). This was true also of the tattoo and piercing exhibitions. After 1 year without control visits however, an increase of complaints was to be seen in 1999. According to our experience tattooists and piercers are interested in good hygiene practice. But our data showing the worsening hygiene data in one year without control visits also demonstrate the necessity of regular controls by the authorities. According to the reports on infectious complications of tattooing and piercing and according to the data reported here hygienic advice and control is an important task of Public Health services.

Body piercing and tattoos: a survey on young adults' knowledge of the risks and practices in body art

Directory of Open Access Journals (Sweden)

Caggiano Giuseppina

2011-10-01

Full Text Available Abstract Background The practice of tattooing and piercing has expanded in western society. In order to verify young adults' knowledge of the risk and practices related to body art, an investigation was conducted among freshmen of the University of Bari in the region of Apulia, Italy. Methods The study was carried out in the Academic Year 2009-2010 through an anonymous self-administered written questionnaire distributed to 1.656 freshmen enrolled in 17 Degree Courses. Results Of the 1.598 students included in the analysis, 78.3% believe it is risky to undergo piercing/tattoo practices. AIDS was indicated as a possible infection by 60.3% of freshmen, hepatitis C by 38.2%, tetanus by 34.3% and hepatitis B by 33.7% of the sample. 28.1% of freshmen were not aware that there are also non-infectious complications. 29% of the sample had at least one piercing or tattoo (this percentage does not include earlobe piercing in women. Of those with body art, the decision to undergo body art was made autonomously in 57.9% of the participants. 56.3% of freshmen undergoing body art had taken less than a month to decide. With regard to the reasons that led the sample to undergo body art, 28.4% were unable to explain it, 23.8% answered to improve their aesthetic aspect, 18.4% to distinguish themselves from others, 12.3% for fashion; 17.1% for other reasons. 25.4% of the sample declared that they had a piercing (79.8% female vs 20.2% male; ratio M/F 1:4.0. The average age for a first piercing was 15.3 years (range 10-27; SD ± 2.9. 9.6% of the sample declared that they have a tattoo (69.9% female vs 30.1% male; ratio M/F 1:2.3. The average age for a first tattoo was 17.5 years (range 10-26, SD ± 2.4. Conclusions Most of the freshmen knew about AIDS-related risks but not other potential risks. Body art is fairly common among young adults (especially women. The decision is often not shared with the family and is undertaken mostly without a specific reason or for the

Two-Channel SPR Sensor Combined Application of Polymer- and Vitreous-Clad Optic Fibers

Directory of Open Access Journals (Sweden)

Yong Wei

2017-12-01

Full Text Available By combining a polymer-clad optic fiber and a vitreous-clad optic fiber, we proposed and fabricated a novel optic fiber surface plasmon resonance (SPR sensor to conduct two-channel sensing at the same detection area. The traditional optic fiber SPR sensor has many disadvantages; for example, removing the cladding requires corrosion, operating it is dangerous, adjusting the dynamic response range is hard, and producing different resonance wavelengths in the sensing area to realize a multi-channel measurement is difficult. Therefore, in this paper, we skillfully used bare fiber grinding technology and reverse symmetry welding technology to remove the cladding in a multi-mode fiber and expose the evanescent field. On the basis of investigating the effect of the grinding angle on the dynamic range change of the SPR resonance valley wavelength and sensitivity, we combined polymer-clad fiber and vitreous-clad fiber by a smart design structure to realize at a single point a two-channel measurement fiber SPR sensor. In this paper, we obtained a beautiful spectral curve from a multi-mode fiber two-channel SPR sensor. In the detection range of the refractive rate between 1.333 RIU and 1.385 RIU, the resonance valley wavelength of channel Ⅰ shifted from 622 nm to 724 nm with a mean average sensitivity of 1961 nm/RIU and the resonance valley wavelength of channel Ⅱ shifted from 741 nm to 976 nm with a mean average sensitivity of 4519 nm/RIU.

Two-Channel SPR Sensor Combined Application of Polymer- and Vitreous-Clad Optic Fibers.

Science.gov (United States)

Wei, Yong; Su, Yudong; Liu, Chunlan; Nie, Xiangfei; Liu, Zhihai; Zhang, Yu; Zhang, Yonghui

2017-12-09

By combining a polymer-clad optic fiber and a vitreous-clad optic fiber, we proposed and fabricated a novel optic fiber surface plasmon resonance (SPR) sensor to conduct two-channel sensing at the same detection area. The traditional optic fiber SPR sensor has many disadvantages; for example, removing the cladding requires corrosion, operating it is dangerous, adjusting the dynamic response range is hard, and producing different resonance wavelengths in the sensing area to realize a multi-channel measurement is difficult. Therefore, in this paper, we skillfully used bare fiber grinding technology and reverse symmetry welding technology to remove the cladding in a multi-mode fiber and expose the evanescent field. On the basis of investigating the effect of the grinding angle on the dynamic range change of the SPR resonance valley wavelength and sensitivity, we combined polymer-clad fiber and vitreous-clad fiber by a smart design structure to realize at a single point a two-channel measurement fiber SPR sensor. In this paper, we obtained a beautiful spectral curve from a multi-mode fiber two-channel SPR sensor. In the detection range of the refractive rate between 1.333 RIU and 1.385 RIU, the resonance valley wavelength of channel Ⅰ shifted from 622 nm to 724 nm with a mean average sensitivity of 1961 nm/RIU and the resonance valley wavelength of channel Ⅱ shifted from 741 nm to 976 nm with a mean average sensitivity of 4519 nm/RIU.

Circuit effects on Pierce instabilities revisited

International Nuclear Information System (INIS)

Kuhn, S.; Hoerhager, M.; Crystal, T.L.

1985-01-01

The problem of external circuit effects on Pierce diode instability studied by Raadu and Silevitch is reconsidered. The characteristic equation and the ensuing eigenfrequencies are found to disagree with those given by the authors above, which discrepancy is attributed to the fact that one of their boundary conditions is inconsistent with the model chosen. (author)

Genital piercings in the context of acute sexual assault.

Science.gov (United States)

Goldberg, Amy P

2017-11-01

After an acute sexual assault, children and adolescents often present for medical evaluation and treatment. Physicians have an important role in both the medical and legal components of these cases. Careful physical examination and questioning are important in determining the origin of the trauma. In the presented case report, genital trauma after an acute sexual assault was noted and attributed to the alleged offender's penis piercing. The genital trauma caused by the piercing provided physical evidence linking offender to victim and may have implications for the victim's risk of HIV infection and other blood borne pathogens. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

27 CFR 478.149 - Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The provisions of §§ 478.37 and 478.99(d) with respect to the manufacture or importation of armor piercing...

Combinations of SPR and MS for Characterizations of Native and Recombinant Proteins in Cell Lysates

DEFF Research Database (Denmark)

Borch, Jonas; Roepstorff, Peter

2006-01-01

Surface plasmon resonance and mass spectrometry (SPR-MS) has been combined for quality check of recombinant 6xHis-tagged 14-3-3 proteins expressed in Escherichia coli. Lysates were injected over an SPR sensorchip with immobilized Ni2+ for SPR analysis of the specific Ni2+ binding response...... and stability. To validate the identity, intactness and homogeneity of the captured proteins were eluted for mass spectrometric analysis of intact molecular weight and peptide mass mapping. Additionally, the captured recombinant proteins were investigated for specific binding to known phosphorylated ligands...... of 14-3-3 proteins in order to test their activity. Specific binding of recombinant and native 14-3-3 proteins in complex mixtures to immobilized phosphopeptides and subsequent elution was also tested by SPR-MS. Ammonium sulfate precipitate fractions from lysates of E. coli expressing 14-3-3 protein...

[A PhD completed. Trauma to the gingiva by oral hygiene aids and oral piercings].

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; van der Weijden, G A

2017-12-01

Maintaining healthy teeth and soft oral tissue is important. Clinical research has shown manual toothbrushes with end-rounded filaments to cause significantly less gingival abrasions than those without end-rounding. Tapered filaments are an alternative to end-rounded filaments, but there is no solid evidence for their effectiveness. For the interdental spaces that the toothbrush doesn't reach, the use of special oral hygiene aids is advised. Clinical studies of gingivitis patients have shown that both interdental brushes and plastic-rubber bristles reduce gingivitis after 4 weeks of use. Plastic-rubber bristles result in a significant improvement in the tendency for interdental bleeding compared with interdental brushes, and they cause less abrasion of the gingiva. Other factors that can potentially traumatise soft and hard oral tissue are oral piercings. Wearing oral piercings is not without risk. Tongue and lip piercings are associated with the risk of gingival recession, and tongue piercings are associated with tooth fractures. To prevent the risk of complications, patients should be discouraged from wearing oral piercings.

Nipple piercing may be contraindicated in male patients with chest implants.

Science.gov (United States)

de Kleer, N; Cohen, M; Semple, J; Simor, A; Antonyshyn, O

2001-08-01

The authors present a man who underwent chest augmentation and nipple piercing. The patient developed chronic nipple infection, which led to unnecessary invasive diagnostic procedures, serious implant infection, and eventually urgent explantation. This unfavorable scenario illustrates the distinct features of the procedure in men, which includes close proximity of the nipple to the implant and reduced awareness by health care providers. Based on this case the authors recommend avoiding nipple piercing in men with chest implants.

A multi-feature integration method for fatigue crack detection and crack length estimation in riveted lap joints using Lamb waves

Data.gov (United States)

National Aeronautics and Space Administration — This paper presents an experimental study of damage detection and quantification in riveted lap joints. Embedded lead zirconate titanate piezoelectric (PZT) ceramic...

Enhanced antibody recognition with a magneto-optic surface plasmon resonance (MO-SPR) sensor.

Science.gov (United States)

Manera, Maria Grazia; Ferreiro-Vila, Elías; Garcia-Martin, José Miguel; Garcia-Martin, Antonio; Rella, Roberto

2014-08-15

A comparison between sensing performance of traditional SPR (Surface Plasmon Resonance) and magneto-optic SPR (MOSPR) transducing techniques is presented in this work. MOSPR comes from an evolution of traditional SPR platform aiming at modulating Surface Plasmon wave by the application of an external magnetic field in transverse configuration. Previous work demonstrated that, when the Plasmon resonance is excited in these structures, the external magnetic field induces a modification of the coupling of the incident light with the Surface Plasmon Polaritons (SPP). Besides, these structures can lead to an enhancement in the magneto-optical (MO) activity when the SPP is excited. This phenomenon is exploited in this work to demonstrate the possibility to use the enhanced MO signal as proper transducer signal for investigating biomolecular interactions in liquid phase. To this purpose, the transducer surface was functionalized by thiol chemistry and used for recording the binding between Bovine Serum Albumin molecules immobilized onto the surface and its complementary target. Higher sensing performance in terms of sensitivity and lower limit of detection of the MOSPR biosensor with respect to traditional SPR sensors is demonstrated. Copyright © 2014 Elsevier B.V. All rights reserved.

Správa nemovitosti versus facility management

OpenAIRE

Rázga, Štěpán

2008-01-01

Problematiku facility managementu a správy nemovitostí práce uceleně shrnuje a porovnává teoretické předpoklady a metodické postupy plynoucí z výuky facility managementu na VŠE v Praze s výkonem daných činností v praxi.

Pleiotropic Regulation of Virulence Genes in Streptococcus mutans by the Conserved Small Protein SprV.

Science.gov (United States)

Shankar, Manoharan; Hossain, Mohammad S; Biswas, Indranil

2017-04-15

Streptococcus mutans , an oral pathogen associated with dental caries, colonizes tooth surfaces as polymicrobial biofilms known as dental plaque. S. mutans expresses several virulence factors that allow the organism to tolerate environmental fluctuations and compete with other microorganisms. We recently identified a small hypothetical protein (90 amino acids) essential for the normal growth of the bacterium. Inactivation of the gene, SMU.2137, encoding this protein caused a significant growth defect and loss of various virulence-associated functions. An S. mutans strain lacking this gene was more sensitive to acid, temperature, osmotic, oxidative, and DNA damage-inducing stresses. In addition, we observed an altered protein profile and defects in biofilm formation, bacteriocin production, and natural competence development, possibly due to the fitness defect associated with SMU.2137 deletion. Transcriptome sequencing revealed that nearly 20% of the S. mutans genes were differentially expressed upon SMU.2137 deletion, thereby suggesting a pleiotropic effect. Therefore, we have renamed this hitherto uncharacterized gene as sprV ( s treptococcal p leiotropic r egulator of v irulence). The transcript levels of several relevant genes in the sprV mutant corroborated the phenotypes observed upon sprV deletion. Owing to its highly conserved nature, inactivation of the sprV ortholog in Streptococcus gordonii also resulted in poor growth and defective UV tolerance and competence development as in the case of S. mutans Our experiments suggest that SprV is functionally distinct from its homologs identified by structure and sequence homology. Nonetheless, our current work is aimed at understanding the importance of SprV in the S. mutans biology. IMPORTANCE Streptococcus mutans employs several virulence factors and stress resistance mechanisms to colonize tooth surfaces and cause dental caries. Bacterial pathogenesis is generally controlled by regulators of fitness that are

Labrets: Piercing and Stretching on the Northwest Coast and in Amazonia

Directory of Open Access Journals (Sweden)

Jenny Reddish

2014-05-01

Full Text Available This article examines the practice of piercing and stretching the lip in order to accommodate a labret in two regions: the North American Northwest Coast (with historical examples from Tlingit and Haida groups and lowland South America (utilizing ethnographic writings on Suya and Kayapo communities. Drawing on the recent ‘sensorial turn’ within anthropology, I suggest an approach which goes beyond considerations of the symbolism of body ornaments and analyses how the infliction of pain they involve can be manipulated to serve social ends at a local level. Also discussed is the use of labrets within global ‘mediascapes’ (Appadurai 1996 by Kayapo and Northwest Coast groups in the context of self-representation and the politicization of ‘culture’ (Wright 1998.

Accuracy of thick-walled hollows during piercing on three-high mill

International Nuclear Information System (INIS)

Potapov, I.N.; Romantsev, B.A.; Shamanaev, V.I.; Popov, V.A.; Kharitonov, E.A.

1975-01-01

The results of investigations are presented concerning the accuracy of geometrical dimensions of thick-walled sleeves produced by piercing on a 100-ton trio screw rolling mill MISiS with three schemes of fixing and centering the rod. The use of a spherical thrust journal for the rod and of a long centering bushing makes it possible to diminish the non-uniformity of the wall thickness of the sleeves by 30-50%. It is established that thick-walled sleeves with accurate geometrical dimensions (nonuniformity of the wall thickness being less than 10%) can be produced if the system sleeve - mandrel - rod is highly rigid and the rod has a two- or three-fold stability margin over the length equal to that of the sleeve being pierced. The process of piercing is expedient to be carried out with increased angles of feed (14-16 deg). Blanks have been made from steel 12Kh1MF

Real-time ligation chain reaction for DNA quantification and identification on the FO-SPR.

Science.gov (United States)

Knez, Karel; Spasic, Dragana; Delport, Filip; Lammertyn, Jeroen

2015-05-15

Different assays have been developed in the past years to meet point-of-care diagnostic tests requirements for fast and sensitive quantification and identification of targets. In this paper, we developed the ligation chain reaction (LCR) assay on the Fiber Optic Surface Plasmon Resonance (FO-SPR) platform, which enabled simultaneous quantification and cycle-to-cycle identification of DNA during amplification. The newly developed assay incorporated FO-SPR DNA melting assay, previously developed by our group. This required establishment of several assay parameters, including buffer ionic strength and thermal ramping speed as these parameters both influence the ligation enzyme performance and the hybridization yield of the gold nanoparticles (Au NPs) on the FO-SPR sensor. Quantification and identification of DNA targets was achieved over a wide concentration range with a calibration curve spanning 7 orders of magnitude and LOD of 13.75 fM. Moreover, the FO-SPR LCR assay could discriminate single nucleotide polymorphism (SNPs) without any post reaction analysis, featuring thus all the essential requirements of POC tests. Copyright © 2014 Elsevier B.V. All rights reserved.

Smithsonian Marine Station (SMS) at Fort Pierce

Science.gov (United States)

share current Smithsonian research on the plants and animals of the Indian River Lagoon and marine Smithsonian Marine Station at Fort Pierce Website Search Box Search Field: SMS Website Search Twitter SMS Home › Welcome to the Smithsonian Marine Station Homepage slideshow Who We Are... The

Experimental Analysis of Stiffness of the Riveted Steel Railway Bridge Deck Members’ Joints

Directory of Open Access Journals (Sweden)

Gocál Jozef

2014-12-01

Full Text Available The paper deals with the real behaviour of the riveted steel railway bridge deck members’ connections with respect to their bending stiffness. Attention is paid to the stringer-to-cross beam connection as well as the cross beam-to-main girder connection. The stiffness of the two connections is investigated on the basis of evaluation of the experimentally determined stress response of the observed structural members to the actual traffic load on an existing railway bridge.

Pierce Lumber, Inc. - Clean Water Act Public Notice

Science.gov (United States)

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

Oral parafunctions, piercing and signs and symptoms of temporomandibular disorders in high school students.

Science.gov (United States)

Mejersjö, Christina; Ovesson, Daniel; Mossberg, Birgitta

2016-01-01

The use of chewing-gum and piercing has become common among adolescents and might result in increased oral muscle activity and overloading. Aim To investigate the frequency of oral piercing and parafunctions in relation to symptoms of temporomandibular disorders (TMD) among adolescents. One hundred and twenty-four third level high school students, living either in a city or in a small town, enrolled in either science or media programmes, were included. The students completed a questionnaire regarding different parafunctions and symptoms of TMD. A clinical examination of the temporomandibular system and estimation of the tooth wear was performed in 116 students. Chewing-gum was used by 86% of the students (25% with a daily use) and 14% had an oral piercing. The science students used more chewing gum than the media students (p = 0.008), while the media students had more piercings (p headache, 18% for clicking, 7% for facial pain and 6% for difficulty to open wide. Girls reported more headaches (p = 0.007) and more severe symptoms (p = 0.003), had more medical consultations and used more analgesics (both p headache (p temporomandibular joints and muscles (both p headache and muscle tenderness (both p headache (p < 0.05) and tooth wear (p = 0.004). There is an association between use of chewing gum, nail biting, oral piercing, and symptoms of TMD.

A molecular imprinted SPR biosensor for sensitive determination of citrinin in red yeast rice.

Science.gov (United States)

Atar, Necip; Eren, Tanju; Yola, Mehmet Lütfi

2015-10-01

A novel and sensitive molecular imprinted surface plasmon resonance (SPR) biosensor was developed for selective determination of citrinin (CIT) in red yeast rice. Firstly, the gold surface of SPR chip was modified with allyl mercaptane. Then, CIT-imprinted poly(2-hydroxyethyl methacrylate-methacryloylamidoglutamic acid) (p(HEMA-MAGA)) film was generated on the gold surface modified with allyl mercaptane. The unmodified and imprinted surfaces were characterized by Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM) and contact angle measurements. The linearity range and the detection limit were obtained as 0.005-1.0 ng/mL and 0.0017 ng/mL, respectively. The SPR biosensor was applied to determination of CIT in red yeast rice sample. Copyright © 2015 Elsevier Ltd. All rights reserved.

Enhanced magneto-optical SPR platform for amine sensing based on Zn porphyrin dimers

OpenAIRE

Manera, M. G.; Ferreiro-Vila, E.; Garcia-Martin, J. M.; Cebollada, A.; Garcia-Martin, A.; Giancane, G.; Valli, L.; Rella, R.

2013-01-01

Ethane-bridged Zn porphyrins dimers (ZnPP) have been deposited by Langmuir-Schäfer (LS) deposition technique onto proper transducer layers for surface plasmon resonance (SPR) and magneto-optical surface plasmon resonance (MO-SPR) characterization techniques performed in controlled atmosphere. This last tool has emerged as a novel and very performing sensing technique using as transducer layers a combination of noble and magnetic layers deposited onto glass substrates. A magnetic actuation all...

[Tatoos, piercing: body art? Body damage? Debasement of the body or return to a primitive way of life?].

Science.gov (United States)

Grognard, C

2006-01-01

Tatoos and piercing, though they might appear as something like a trend, if not a craze, remain for a majority minority and even fringe practices. For the adolescent, questing for his identity (no more a child, not yet an adult), the tegmental sign is a way of engraving in the flesh dramatic events of his existence. The body mark is a search for independence, a symbolic attainment of self-reliance, a way of severing the umbilical cord and of asserting oneself. In face of a life no longer under control, the body is an object at hand, on which self-will is almost unbridled... These body modifications testify to change.

People with multiple tattoos and/or piercings are not at increased risk for HBV or HCV in The Netherlands

NARCIS (Netherlands)

Urbanus, Anouk T.; van den Hoek, Anneke; Boonstra, Albert; van Houdt, Robin; de Bruijn, Lotte J.; Heijman, Titia; Coutinho, Roel A.; Prins, Maria

2011-01-01

Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in

The NASA/IPAC Teacher Archive Research Program (NITARP) at Pierce College

Science.gov (United States)

Mallory, Carolyn R.; Feig, M.; Mahmud, N.; Silic, T.; Rebull, L.; Hoette, V.; Johnson, C.; McCarron, K.

2011-01-01

Our team from Pierce Community College, Woodland Hills, CA, participated in the NASA/IPAC Teacher Archive Research Program (NITARP) this past year (2010). (NITARP is described in another poster, Rebull et al.) Our team worked with archival Spitzer, 2MASS, and optical data to look for young stars in CG4, part of the Gum Nebula; our scientific results are described in a companion poster, Johnson et al. In this poster, we describe more about what we learned and how we incorporated our NITARP experiences into the Pierce College environment. Students developed critical thinking skills and an ability to organize their data analysis and develop a mental "big picture" of what is going on in the CG4 region. The NITARP program is one of several "Active Learning" programs going on at Pierce, and the other programs are briefly summarized in this poster as well. This program was made possible through the NASA/IPAC Teacher Archive Research Project (NITARP) and was funded by NASA Astrophysics Data Program and Archive Outreach funds.

Tatuagem, body piercing e a experiência da dor: emoção, ritualização e medicalização Tattoo, body piercing and the experience of pain: emotion, ritualization and medicalization

Directory of Open Access Journals (Sweden)

Vitor Sérgio Ferreira

2010-06-01

Full Text Available Configurando uma experiência física que desafia tabus físicos e sociais, a marcação do corpo através da tatuagem e body piercing tem sido bastante explorada no espaço público mediatizado em função das questões da dor voluntária e dos riscos de saúde individual e pública implicados. Ao pânico moral que já envolvia estas práticas, associadas a comportamentos tidos como socialmente desviantes, psico-patológicos ou criminosos, junta-se-lhes outra espécie de pânico social, o «pânico higienista», associado ao receio de contrair doenças infecto-contagiosas, ou de reagir aos materiais ou tintas encarnados. No sentido de ir além destes discursos, este artigo pretende analisar: por um lado, como os consumidores actuais de tatuagem e body piercing lidam com a dor que lhe está associada, que emoções enquadram essa sensação e que estratégias convocam no seu controlo; por outro lado, como é que os produtores de tatuagem e body piercing, perante novas e mais alargadas clientelas, lidam com exigência de disciplinas sanitárias na sua prática profissional. Em termos metodológicos, a informação empírica apresentada no artigo foi obtida em situação de entrevista em profundidade, de natureza biográfica, semi-estruturada na sua preparação e semi-diretiva na sua aplicação, a portadores de corpos multitatuados e multiperfurados, profissionais ou apenas consumidores de tatuagem e body piercing. Quinze entrevistados com diferentes perfis sociais foram recrutados em estúdios de tatuagem e body piercing de Lisboa e arredores, depois de intenso trabalho etnográfico nesses mesmos espaços.Being a physical experience that challenges sensitive and social taboos, body marking with tattoos and body piercing has been fairly explored in the public sphere regarding the issues of voluntary pain and the risks of individual and public health that are involved. Associated with the moral panic that is already linked to these practices

Gold nanoparticle-enhanced multiplexed imaging surface plasmon resonance (iSPR) detection of Fusarium mycotoxins in wheat

Science.gov (United States)

A rapid, sensitive and multiplexed imaging surface plasmon resonance (iSPR) biosensor assay was developed and validated for three Fusarium toxins, deoxynivalenol (DON), zearalenone (ZEA) and T-2 toxin. The iSPR assay was based on a competitive inhibition format with secondary antibodies (Ab2) conjug...

Effect of sulfasalazine on human neuroblastoma: analysis of sepiapterin reductase (SPR) as a new therapeutic target

International Nuclear Information System (INIS)

Yco, Lisette P.; Geerts, Dirk; Mocz, Gabor; Koster, Jan; Bachmann, André S.

2015-01-01

Neuroblastoma (NB) is an aggressive childhood malignancy in children up to 5 years of age. High-stage tumors frequently relapse even after aggressive multimodal treatment, and then show therapy resistance, typically resulting in patient death. New molecular-targeted compounds that effectively suppress tumor growth and prevent relapse with more efficacy are urgently needed. We and others previously showed that polyamines (PA) like spermidine and spermine are essential for NB tumorigenesis and that DFMO, an inhibitor of the key PA synthesis gene product ODC, is effective both in vitro and in vivo, securing its evaluation in NB clinical trials. To find additional compounds interfering with PA biosynthesis, we tested sulfasalazine (SSZ), an FDA-approved salicylate-based anti-inflammatory and immune-modulatory drug, recently identified to inhibit sepiapterin reductase (SPR). We earlier presented evidence for a physical interaction between ODC and SPR and we showed that RNAi-mediated knockdown of SPR expression significantly reduced native ODC enzyme activity and impeded NB cell proliferation. Human NB mRNA expression datasets in the public domain were analyzed using the R2 platform. Cell viability, isobologram, and combination index analyses as a result of SSZ treatment with our without DFMO were carried out in NB cell cultures. Molecular protein-ligand docking was achieved using the GRAMM algorithm. Statistical analyses were performed with the Kruskal-Wallis test, 2log Pearson test, and Student’s t test. In this study, we show the clinical relevance of SPR in human NB tumors. We found that high SPR expression is significantly correlated to unfavorable NB characteristics like high age at diagnosis, MYCN amplification, and high INSS stage. SSZ inhibits the growth of NB cells in vitro, presumably due to the inhibition of SPR as predicted by computational docking of SSZ into SPR. Importantly, the combination of SSZ with DFMO produces synergistic antiproliferative effects

Effect of sulfasalazine on human neuroblastoma: analysis of sepiapterin reductase (SPR) as a new therapeutic target.

Science.gov (United States)

Yco, Lisette P; Geerts, Dirk; Mocz, Gabor; Koster, Jan; Bachmann, André S

2015-06-21

Neuroblastoma (NB) is an aggressive childhood malignancy in children up to 5 years of age. High-stage tumors frequently relapse even after aggressive multimodal treatment, and then show therapy resistance, typically resulting in patient death. New molecular-targeted compounds that effectively suppress tumor growth and prevent relapse with more efficacy are urgently needed. We and others previously showed that polyamines (PA) like spermidine and spermine are essential for NB tumorigenesis and that DFMO, an inhibitor of the key PA synthesis gene product ODC, is effective both in vitro and in vivo, securing its evaluation in NB clinical trials. To find additional compounds interfering with PA biosynthesis, we tested sulfasalazine (SSZ), an FDA-approved salicylate-based anti-inflammatory and immune-modulatory drug, recently identified to inhibit sepiapterin reductase (SPR). We earlier presented evidence for a physical interaction between ODC and SPR and we showed that RNAi-mediated knockdown of SPR expression significantly reduced native ODC enzyme activity and impeded NB cell proliferation. Human NB mRNA expression datasets in the public domain were analyzed using the R2 platform. Cell viability, isobologram, and combination index analyses as a result of SSZ treatment with our without DFMO were carried out in NB cell cultures. Molecular protein-ligand docking was achieved using the GRAMM algorithm. Statistical analyses were performed with the Kruskal-Wallis test, 2log Pearson test, and Student's t test. In this study, we show the clinical relevance of SPR in human NB tumors. We found that high SPR expression is significantly correlated to unfavorable NB characteristics like high age at diagnosis, MYCN amplification, and high INSS stage. SSZ inhibits the growth of NB cells in vitro, presumably due to the inhibition of SPR as predicted by computational docking of SSZ into SPR. Importantly, the combination of SSZ with DFMO produces synergistic antiproliferative effects

A New Keyboard for the Bohlen-Pierce Scale

CERN Document Server

Nassar, Antonio

2011-01-01

The study of harmonic scales of musical instruments is discussed in all introductory physics texts devoted to the science of sound. In this paper, we present a new piano keyboard to make the so-called Bohlen-Pierce scale more functional and pleasing for composition and performance.

Surface functionalization of SPR chip for specific molecular interaction analysis under flow condition

Directory of Open Access Journals (Sweden)

Tao Ma

2017-03-01

Full Text Available Surface functionalization of sensor chip for probe immobilization is crucial for the biosensing applications of surface plasmon resonance (SPR sensors. In this paper, we report a method circulating the dopamine aqueous solution to coat polydopamine film on sensing surface for surface functionalization of SPR chip. The polydopamine film with available thickness can be easily prepared by controlling the circulation time and the biorecognition elements can be immobilized on the polydopamine film for specific molecular interaction analysis. These operations are all performed under flow condition in the fluidic system, and have the advantages of easy implementation, less time consuming, and low cost, because the reagents and devices used in the operations are routinely applied in most laboratories. In this study, the specific absorption between the protein A probe immobilized on the sensing surface and human immunoglobulin G in the buffer is monitored based on this surface functionalization strategy to demonstrated its feasibility for SPR biosensing applications.

Heating of aluminum by SPR-III burst

International Nuclear Information System (INIS)

Judd, S.V.

1987-01-01

Real time temperature measurements were made on an aluminum cylinder exposed to radiation bursts at SPR-III at neutron levels from 10 11 cm -2 to 4.5 x 10 14 cm -2 . Precision thermistors and high speed A/D converters were used to measure temperature with .0025 degree C resolution at 20ms intervals following the burst. Temperature data is presented as a function of neutron fluence

Prevalence and acceptance of tattoos and piercings: a survey of young adults from the southern German-speaking area of Central Europe.

Science.gov (United States)

Stieger, Stefan; Pietschnig, Jakob; Kastner, Cornelia K; Voracek, Martin; Swami, Viren

2010-06-01

The present study examined the prevalence and acceptance of body piercings and tattoos among a community sample from the southern German-speaking area of Central Europe. A total of 440 respondents completed information about their own body piercings and tattoos and reported whether they would be likely never to have piercings and tattoos in the future. Analyses indicated that 19.8 and 15.2% of respondents had piercings (excluding the earlobe) and tattoos, respectively. Women were more likely to have body piercings than men, but there were no sex differences in tattooing. There were also few sociodemographic differences in piercings and tattoos, and most participants reported being likely to consider body art in the future. These results are considered in relation to prevalence estimates of body art in other Western countries and the associated health risks.

Analysis of SPR salt cavern remedial leach program 2013.

Energy Technology Data Exchange (ETDEWEB)

Weber, Paula D.; Gutierrez, Karen A.; Lord, David L.; Rudeen, David Keith

2013-09-01

The storage caverns of the US Strategic Petroleum Reserve (SPR) exhibit creep behavior resulting in reduction of storage capacity over time. Maintenance of oil storage capacity requires periodic controlled leaching named remedial leach. The 30 MMB sale in summer 2011 provided space available to facilitate leaching operations. The objective of this report is to present the results and analyses of remedial leach activity at the SPR following the 2011 sale until mid-January 2013. This report focuses on caverns BH101, BH104, WH105 and WH106. Three of the four hanging strings were damaged resulting in deviations from normal leach patterns; however, the deviations did not affect the immediate geomechanical stability of the caverns. Significant leaching occurred in the toes of the caverns likely decreasing the number of available drawdowns until P/D ratio criteria are met. SANSMIC shows good agreement with sonar data and reasonably predicted the location and size of the enhanced leaching region resulting from string breakage.

Gingival recession is likely associated with tongue piercings.

Science.gov (United States)

Reynolds, Mark A

2012-09-01

A convenience sample of 60 subjects (27 male; 33 female) with tongue piercings (case group) and 120 subjects (43 male; 77 female) without tongue piercings (control group), ranging in age from 13 to 28 years, were identified from a mix of races living in a geographic area of low socioeconomic status in Brazil. Subjects were recruited from school groups and university centers between January 2008 and March 2009. For each case, 2 controls were selected on a consecutive basis from the same school according to criteria that included age, gender, smoking, and previous orthodontic treatment. Exclusion criteria included individuals with systemic diseases that might compromise the immune system, as well as antibiotics within 3 months or other medications that could affect the gingival tissues. The key study factor was the use or nonuse of tongue piercings (jewelry). The analysis compared periodontal parameters, such as the occurrence, location, and severity of gingival recession, in subjects with and without tongue jewelry. Gingival recession in the anterior lingual mandibular region was assessed as the primary outcome measure. The study sample was divided according to the presence or absence of gingival recession as well as the severity (1-2, 3, and ≥ 4 mm) of gingival recession. The average age of subjects was similar in the case and control groups (18.9 versus 17.7 years, respectively). Fractures of the anterior teeth were present significantly more frequently in cases than controls (26.7% versus 11.7%, respectively; P piercings (OR = 11.0, 95% confidence interval [CI] 5.02-24.09, P <.001). The severity of recession in this region was also significantly higher (calculated using an ordinal scale) in cases than in controls (P < .001). The final multivariate logistic regression model for occurrence of gingival recession included the variables tongue jewelry (yes/no), age, male gender, and the presence of bleeding on probing in the anterior region. Subjects with tongue

Medical tongue piercing – development and evaluation of a surgical protocol and the perception of procedural discomfort of the participants

Science.gov (United States)

2014-01-01

Background A system providing disabled persons with control of various assistive devices with the tongue has been developed at Aalborg University in Denmark. The system requires an activation unit attached to the tongue with a small piercing. The aim of this study was to establish and evaluate a safe and tolerable procedure for medical tongue piercing and to evaluate the expected and perceived procedural discomfort. Methods Four tetraplegic subjects volunteered for the study. A surgical protocol for a safe insertion of a tongue barbell piercing was presented using sterilized instruments and piercing parts. Moreover, post-procedural observations of participant complications such as bleeding, edema, and infection were recorded. Finally, procedural discomforts were monitored by VAS scores of pain, changes in taste and speech as well as problems related to hitting the teeth. Results The piercings were all successfully inserted in less than 5 min and the pain level was moderate compared with oral injections. No bleeding, infection, embedding of the piercing, or tooth/gingival injuries were encountered; a moderate edema was found in one case without affecting the speech. In two cases the piercing rod later had to be replaced by a shorter rod, because participants complained that the rod hit their teeth. The replacements prevented further problems. Moreover, loosening of balls was encountered, which could be prevented with the addition of dental glue. No cases of swallowing or aspiration of the piercing parts were recorded. Conclusions The procedure proved simple, fast, and safe for insertion of tongue piercings for tetraplegic subjects in a clinical setting. The procedure represented several precautions in order to avoid risks in these susceptible participants with possible co-morbidity. No serious complications were encountered, and the procedure was found tolerable to the participants. The procedure may be used in future studies with tongue piercings being a

REGULAR AND SPECIFIC FEATURES OF STRESSED AND DEFORMED STATE OF COMPOSITE MATERIAL WITH PIERCED OPENING

Directory of Open Access Journals (Sweden)

Yu. V. Vasilevich

2007-01-01

Full Text Available Mathematical model describing a dependence between deformations and stresses in the zone of prepreg piercing zone is given in the paper. Boundary conditions in the piercing zone in number of four functional dependences for prepregs can express either the given stresses or displacements, or describe boundary form, or express relations between stresses and displacements etc.

Special awards lighten up SPR banquet

Science.gov (United States)

Zwickl, Ron; Baker, Dan; Reiff, Pat

On December 8, 1982, Marcia Neugebauer, then president of the Solar and Planetary Relationships section, held the “First Occasional Awards Ceremony” in conjunction with the annual dinner banquet at the Fall AGU meeting. These awards were an attempt to add a little humor to our usually somber gatherings. This year we reincarnated Neugebauer's successful concept and presented a number of new and novel awards to our fellow scientists at the Fall AGU SPR dinner. Summarized for your enjoyment are the categories and the official winners, as announced at the December 6 banquet.

Blanking and piercing theory, applications and recent experimental results

International Nuclear Information System (INIS)

Zaid, Adnan l O

2014-01-01

Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The abovementioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is alsogiven and discussed

The Development of Piezo-Driven Tools for Cellular Piercing

Directory of Open Access Journals (Sweden)

Changhai Ru

2016-10-01

Full Text Available Conventionally, intracytoplasmic sperm injection (ICSI in the mouse is conducted with piezo-drills that use a droplet of mercury for damping. The use of mercury causes concerns of toxicity and contamination. Although Fluorinert can be used as a substitute for mercury to reduce piezo-drill’s lateral vibration, the damping effect is not as satisfactory as mercury. In this work, a modified piezo-drill without using mercury was developed for the cellular piercing of mouse oocytes. Experimentally, appropriate parameters of driving voltage and frequency were obtained for the penetration of the zona pellucida of mouse oocytes. Furthermore, the lateral vibration of the injection pipette is lower than 1 μm in deionized water, which is not observable at 400 magnificence. With the piezo-drill without using mercury, the system performs the cellular piercing of mouse oocytes with a maximum cleavage rate of 94.7% (n = 117.

The SPR detection of Salmonella enteritidis in food using aptamers as recongnition elements

Science.gov (United States)

Di, W. T.; Du, X. W.; Pan, M. F.; Wang, J. P.

2017-09-01

In this experiment, a fast, accurate, non-destructive, unmarked and simple-operation detection method for Salmonella enteritidis in food was established by the BI-3000 plasma resonance biosensor (SPR). This article establishes a method of using nucleic acid aptamer as immune recognition element in SPR which can be employed to detect Salmonella enteritidis in food for the first time. The experimental conditions were screened and the experimental scheme was validated and applied. The best flow rate was 5μL/min, the best concentration of the aptamers was 180mM, and the best regenerating solution was the 20mM NaOH. This method had almost no cross-reactivity. Besides, we established a standard curve of Salmonella enteritidis and SPR signal, with the detection limit of 2 cfu/mL. Finally, we tested the samples of chicken, pork, shrimp and fish purchased from supermarkets. The method has the advantages of short time, low detection limit and easy operation, which can be used for a large number of food samples.

Floating Chip Mounting System Driven by Repulsive Force of Permanent Magnets for Multiple On-Site SPR Immunoassay Measurements

Science.gov (United States)

Horiuchi, Tsutomu; Tobita, Tatsuya; Miura, Toru; Iwasaki, Yuzuru; Seyama, Michiko; Inoue, Suzuyo; Takahashi, Jun-ichi; Haga, Tsuneyuki; Tamechika, Emi

2012-01-01

We have developed a measurement chip installation/removal mechanism for a surface plasmon resonance (SPR) immunoassay analysis instrument designed for frequent testing, which requires a rapid and easy technique for changing chips. The key components of the mechanism are refractive index matching gel coated on the rear of the SPR chip and a float that presses the chip down. The refractive index matching gel made it possible to optically couple the chip and the prism of the SPR instrument easily via elastic deformation with no air bubbles. The float has an autonomous attitude control function that keeps the chip parallel in relation to the SPR instrument by employing the repulsive force of permanent magnets between the float and a float guide located in the SPR instrument. This function is realized by balancing the upward elastic force of the gel and the downward force of the float, which experiences a leveling force from the float guide. This system makes it possible to start an SPR measurement immediately after chip installation and to remove the chip immediately after the measurement with a simple and easy method that does not require any fine adjustment. Our sensor chip, which we installed using this mounting system, successfully performed an immunoassay measurement on a model antigen (spiked human-IgG) in a model real sample (non-homogenized milk) that included many kinds of interfering foreign substances without any sample pre-treatment. The ease of the chip installation/removal operation and simple measurement procedure are suitable for frequent on-site agricultural, environmental and medical testing. PMID:23202030

Pierce - University of Georgia | Division of Cancer Prevention

Science.gov (United States)

Principal Investigator: J. Michael Pierce, PhDInstitution: University of Georgia, Athens, GA Our project, Discovery and Development of Cancer Glycomarkers, is a joint collaboration between our laboratories at the CCRC, which include Karen Abbott, Lance Wells, Kevin Dobbin, and Mike Tiemeyer, those at TGen, in Phoenix, AZ, Daniel Von Hoff, Haiyong Han, and Mike Demeure, and

Dynamics of Pierce instability of hot electron beams

International Nuclear Information System (INIS)

Ignatov, A.M.; Novikov, V.N.

1986-01-01

On the base of a new method of numerical solution of the Vlasov equation evolution of complete function of electron distribution at the injection of hot electron beams into plasma bounded with electrodes is investigated. It is shown that despite the development of electrostatic instabilities in the system the currents can run substantially exceeding the Pierce critical current

Simulation of cylindrical Pierce diodes with radial flow

International Nuclear Information System (INIS)

Alves, M.V.; Gnavi, G.; Gratton, F.T.; Buenos Aires Univ.

1996-01-01

In this paper we study the electron instability and the non linear behaviour of cylindrical Pierce's diodes by particle simulation. We ignore here the ion contribution (ions are fixed at a 1/r density and given a very large mass) to give perspicuity to the electron dynamics, and to facilitate comparison with existing theory. (author). 8 refs., 10 figs

An efficient domain decomposition strategy for wave loads on surface piercing circular cylinders

DEFF Research Database (Denmark)

Paulsen, Bo Terp; Bredmose, Henrik; Bingham, Harry B.

2014-01-01

A fully nonlinear domain decomposed solver is proposed for efficient computations of wave loads on surface piercing structures in the time domain. A fully nonlinear potential flow solver was combined with a fully nonlinear Navier–Stokes/VOF solver via generalized coupling zones of arbitrary shape....... Sensitivity tests of the extent of the inner Navier–Stokes/VOF domain were carried out. Numerical computations of wave loads on surface piercing circular cylinders at intermediate water depths are presented. Four different test cases of increasing complexity were considered; 1) weakly nonlinear regular waves...

Blanking and piercing theory, applications and recent experimental results

International Nuclear Information System (INIS)

Zaid, A. I. O.

2013-01-01

Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The above mentioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is also given and discussed. (author)

[Ultrabraid SUTURE WITH FOOTPRINT RIVET FOR ANTERIOR CRUCIATE LIGAMENT TIBIAL EMINENCE AVULSION FRACTURE IN ADOLESCENTS UNDER ARTHROSCOPY].

Science.gov (United States)

Liang, Jinying; Zheng, Jiapeng; Ll, Qiang; Zhong, Shuyu; Chen, Minzhen

2015-06-01

To investigate the clinical effects of the Ultrabraid suture with FOOTPRINT rivet by arthroscopic technique for the treatment of anterior cruciate ligament (ACL) tibial eminence avulsion fracture. Between May 2011 and December 2013, 19 adolescent patients with ACL tibial eminence avulsion fracture were treated with arthroscopic reduction and fixation by Ultrabraid sutures with FOOTPRINT rivet. There were 13 males and 6 females with an average age of 15.8 years (range, 8-18 years). The left knees were involved in 10 cases and the right knees in 9 cases. The injury causes included traffic accident injury in 8 cases, sport injury in 6 cases, and sprain injury in 5 cases. Three patients had old fractures, and the others had fresh fractures. The results of Lachman test and anterior drawer test were both positive. The International Knee Documentation Committee (IKDC) subject score was 54.2 ± 4.0. Based on Meyers-McKeever classification, there were 3 cases of type II, 10 cases of type III, and 6 cases of type IV. The operation time was 50-60 minutes (mean, 55.2 minutes). X-ray film showed satisfactory fracture reduction at 1 day after operation. Primary healing of incision was obtained with no infection. Eighteen patients were followed up for 1-3 years (mean, 1.7 years). All fractures healed with smooth joint surface on the X-ray film at 3 months after operation. The results of Lachman test and anterior drawer test were both negative in 17 cases, and the results was negative for anterior drawer test and was weakly positive for Lachman test in 1 case. The IKDC subject score was significantly improved to 96.1 ± 2.1 at last follow-up (t = 34.600, P = 0.000). It could achieve early restoration of knee joint function to treat the ACL tibial eminence avulsion fracture by arthroscopic technique of the Ultrabraid suture with FOOTPRINT rivet because of satisfactory reduction, reliable fixation, small wound, and early rehabilitation.

The Pierce-diode approximation to the single-emitter plasma diode

International Nuclear Information System (INIS)

Ender, A. Ya.; Kuhn, S.; Kuznetsov, V. I.

2006-01-01

The possibility of modeling fast processes in the collisionless single-emitter plasma diode (Knudsen diode with surface ionization, KDSI) by means of the Pierce-diode is studied. The KDSI is of practical importance in that it is an almost exact model of thermionic energy converters (TICs) in the collisionless regime and can also be used to model low-density Q-machines. At high temperatures, the Knudsen TIC comes close to the efficiency of the Carnot cycle and hence is the most promising converter of thermal to electric energy. TICs can be applied as component parts in high-temperature electronics. It is shown that normalizations must be chosen appropriately in order to compare the plasma characteristics of the two models: the KDSI and the Pierce-diode. A linear eigenmode theory of the KDSI is developed. For both nonlinear time-independent states and linear eigenmodes without electron reflection, excellent agreement is found between the analytical potential distributions for the Pierce-diode and the corresponding numerical ones for the KDSI. For the states with electron reflection, the agreement is satisfactory in a qualitative sense. A full classification of states of both diodes for the regimes with and without electron reflection is presented. The effect of the thermal spread in electron velocities on the potential distributions and the (ε,η) diagrams is analyzed. Generally speaking, the methodology developed is usefully applicable to a variety of systems in which the electrons have beam-like distributions

Cis-12-oxo-phytodienoic acid stimulates rice defense response to a piercing-sucking insect.

Science.gov (United States)

Guo, Hui-Min; Li, Hai-Chao; Zhou, Shi-Rong; Xue, Hong-Wei; Miao, Xue-Xia

2014-11-01

The brown planthopper (BPH, Nilaparvata lugens) is a destructive, monophagous, piercing-sucking insect pest of rice. Previous studies indicated that jasmonic acid (JA) positively regulates rice defense against chewing insect pests but negatively regulates it against the piercing-sucking insect of BPH. We here demonstrated that overexpression of allene oxide cyclase (AOC) but not OPR3 (cis-12-oxo-phytodienoic acid (OPDA) reductase 3, an enzyme adjacent to AOC in the JA synthetic pathway) significantly increased rice resistance to BPH, mainly by reducing the feeding activity and survival rate. Further analysis revealed that plant response to BPH under AOC overexpression was independent of the JA pathway and that significantly higher OPDA levels stimulated rice resistance to BPH. Microarray analysis identified multiple candidate resistance-related genes under AOC overexpression. OPDA treatment stimulated the resistance of radish seedlings to green peach aphid Myzus persicae, another piercing-sucking insect. These results imply that rice resistance to chewing insects and to sucking insects can be enhanced simultaneously through AOC-mediated increases of JA and OPDA and provide direct evidence of the potential application of OPDA in stimulating plant defense responses to piercing-sucking insect pests in agriculture. © The Author 2014. Published by the Molecular Plant Shanghai Editorial Office in association with Oxford University Press on behalf of CSPB and IPPE, SIBS, CAS.

Piercing and Tattoos in Adolescents: Legal and Medico-legal Implications.

Science.gov (United States)

Conti, Adelaide; Bin, Paola; Casella, Claudia; Capasso, Emanuele; Fedeli, Piergiorgio; Salzano, Francesco Antonio; Terracciano, Lucia; Piras, Mauro

2018-01-01

Non-therapeutic body modification interventions are permitted within the limits of the use of one's own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents. In Italy, several regions have therefore issued acts aimed at regulating the activities of tattoo and piercing also in reference to minors. Discussion. With regard to minors, the rules taken into account set precise limits in relation to the age criterion and subordinate the implementation of such practices to the provision of consent by legal representatives. If such practices are of an aesthetic nature, we cannot avoid considering the implications they have on health protection, and then adopt appropriate measures to protect the person who intends to undergo them, particularly in the case of minors.

Piercing and Tattoos in Adolescents: Legal and Medico-legal Implications

Science.gov (United States)

Conti, Adelaide; Bin, Paola; Casella, Claudia; Capasso, Emanuele; Fedeli, Piergiorgio; Salzano, Francesco Antonio; Terracciano, Lucia; Piras, Mauro

2018-01-01

Abstract Non-therapeutic body modification interventions are permitted within the limits of the use of one’s own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents. Results In Italy, several regions have therefore issued acts aimed at regulating the activities of tattoo and piercing also in reference to minors. Discussion. With regard to minors, the rules taken into account set precise limits in relation to the age criterion and subordinate the implementation of such practices to the provision of consent by legal representatives. Conclusion If such practices are of an aesthetic nature, we cannot avoid considering the implications they have on health protection, and then adopt appropriate measures to protect the person who intends to undergo them, particularly in the case of minors. PMID:29675481

Characteristics of typical Pierce guns for PPM focused TWTs

International Nuclear Information System (INIS)

Harper, R.; Puri, M.P.

1989-01-01

The performance of typical moderate perveance Pierce type electron guns which are used in periodic permanent magnet focused traveling wave tubes are described with regard to adaptation for use in electron beam ion sources. The results of detailed electron trajectory computations for one particular gun design are presented

Theory and Examples of Mathematical Modeling for Fine Weave Pierced Fabric

Directory of Open Access Journals (Sweden)

ZHOU Yu-bo

2017-04-01

Full Text Available A mathematical abstraction and three-dimensional modeling method of three-dimensional woven fabric structure was developed for the fine weave pierced fabric, taking parametric continuity splines as the track function of tow. Based on the significant parameters of fine weave pierced fabric measured by MicroCT, eight kinds of the three-dimensional digital models of the fabric structure were established with two kinds of tow sections and four kinds of tow trajectory characteristic functions. There is a good agreement between the three-dimensional digital models and real fabric by comparing their structures and porosities. This mathematical abstraction and three-dimensional modeling method can be applied in micro models for sub unit cell and macro models for macroscopic scale fabrics, with high adaptability.

Chrysler Upset Protrusion Joining Techniques for Joining Dissimilar Metals

Energy Technology Data Exchange (ETDEWEB)

Logan, Stephen [FCA US LLC, Auburn Hills, MI (United States)

2017-09-28

joining of Mg die castings to aluminum (Al) and steel sheet components of various thicknesses, strengths and coating configurations. While most development focused on the simpler round boss version of the process, an additional phase of the work focused on devel-opment of an oval boss version to support applications with narrow flanges, while yet another vari-ant of the process, known as Upset Cast Riveting (UCR), was developed and evaluated for joining mixed metals that may not necessarily include Mg or Al die cast components. Although each varia-tion posed unique challenges described later in the report, all variations were successfully produced and evaluated, and each could be further developed for specific types of commercial applications. In this project, UPJ performed favorably against the benchmark self-pierce riveting (SPR) process in Mg AM60B to Al 6013 combinations although significant corrosion challenges were observed in both processes, especially for the bare Mg to bare Al configurations. Additional challenges were observed in joining Mg to steel with the UPJ process (SPR was not evaluated for this combination as it was not considered viable). To pass FCA’s specified corrosion tests with Mg/steel combina-tions, new steel treatments were evaluated, as well as adhesives and sealed edges. These showed significant improvement. In general, UPJ performed very well in Mg to Al 6016 combinations, even in corrosion evaluation of the bare Mg to bare Al configuration (again, SPR was not evaluated for this material combination as the 1.1 mm thick Al6016 sheet thickness was considered too thin for the SPR process). The improvement in corrosion performance of the Mg to Al 6016 combina-tion over the Mg to Al 6013 combination was thought to be a result of the lower copper content in the Al 6016 alloy. Oval boss joints showed substantial improvement in all joint strength criteria compared to 8.0-mm diameter round boss joints but were not evaluated for corrosion performance

Psychosocial Adjustment of College Students with Tattoos and Piercings

Science.gov (United States)

Roberti, Jonathan W.; Storch, Eric A.

2005-01-01

The purpose of this study was to examine the association between body modification practices and psychosocial adjustment. Participants were 198 undergraduate college students, 129 of whom had I or more piercings (other than in earlobe) or tattoos. Findings showed that individuals with body modifications reported more symptoms of depression and…

Detection of mycotoxins using imaging surface plasmon resonance (iSPR)

Science.gov (United States)

Significant progress has been made in the development of biosensors that can be used to detect mycotoxins. One technology that has been extensively tested is surface plasmon resonance (SPR). In 2003 a multi-toxin method was reported that detected aflatoxin B1 (AFB1), zearalenone (ZEA), fumonisin B1 ...

Estimation of optical constants of a bio-thin layer (onion epidermis), using SPR spectroscopy

International Nuclear Information System (INIS)

Rehman, Saif-ur-; Hayashi, Shinji; Sekkat, Zouheir; Mumtaz, Huma; Shaukat, S F

2014-01-01

We estimate the optical constants of a biological thin layer (Allium cepa) by surface plasmon resonance (SPR) spectroscopy. For this study, the fresh inner thin epidermis of an onion bulb was used and stacked directly on gold (Au) and silver (Ag) film surfaces in order to identify the shift in SPR mode of each metal film at an operating wavelength of 632.8 nm. The thickness and dielectric constants of the biological thin layer were determined by matching the experimental SPR curves to theoretical ones. The thickness and roughness of bare Au and Ag thin films were also measured by atomic force microscopy (AFM); the results of which are in good agreement with those obtained through experiment. Due to the high surface roughness of the natural onion epidermis layer, AFM could not measure the exact thickness of an onion epidermis. It is estimated that the value of the real part of the dielectric constant of an onion epidermis is between the dielectric constants of water and air. (paper)

Enhancement of chitosan-graphene oxide SPR sensor with a multi-metallic layers of Au–Ag–Au nanostructure for lead(II) ion detection

Energy Technology Data Exchange (ETDEWEB)

Kamaruddin, Nur Hasiba [Department of Electric, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Bakar, Ahmad Ashrif A., E-mail: ashrif@ukm.edu.my [Department of Electric, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Yaacob, Mohd Hanif; Mahdi, Mohd Adzir [Wireless and Photonic Network Research Centre, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Zan, Mohd Saiful Dzulkefly [Department of Electric, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Shaari, Sahbudin [Institute of Microengineering and Nanoelectronics, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia)

2016-01-15

Highlights: • Tri-metallic Au–Ag–Au CS-GO SPR sensor was fabricated for the first time. • The tri-metallic nanostructure provided an enhanced evanescent field. • Successful functionalization of the CS-GO sensing layer. • Superior performance for lead(II) ion detection. - Abstract: We demonstrate the enhancement of surface plasmon resonance (SPR) technique by implementing a multi-metallic layers of Au–Ag–Au nanostructure in the chitosan-graphene oxide (CS-GO) SPR sensor for lead(II) ion detection. The performance of the sensor is analyzed via SPR measurements, from which the sensitivity, signal-to-noise ratio and repeatability are determined. The nanostructure layers are characterized using field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). We showed that the proposed structure has increased the shift in the SPR angle up to 3.5° within the range of 0.1–1 ppm due to the enhanced evanescent field at the sensing layer-analyte interface. This sensor also exhibits great repeatability which benefits from the stable multi-metallic nanostructure. The SNR value of 0.92 for 5 ppm lead(II) ion solution and reasonable linearity range up to that concentration shows that the tri-metallic CS-GO SPR sensor gives a good response towards the lead(II) ion solution. The CS-GO SPR sensor is also sensitive to at least a 10{sup −5} change in the refractive index. The results prove that our proposed tri-metallic CS-GO SPR sensor demonstrates a strong performance and reliability for lead(II) ion detection in accordance with the standardized lead safety level for wastewater.

Riscos e complicações do uso de piercing oral: uma revisão sistemática

Directory of Open Access Journals (Sweden)

José Wittor de Macêdo Santos

2017-02-01

Full Text Available Introdução: O uso de piercing oral tem despertado o interesse dos profissionais da Odontologia devido à associação com diversas complicações locais e sistêmicas. Objetivo: Este trabalho objetivou realizar uma revisão sistemática da literatura sobre riscos e complicações associadas ao uso de piercings orais e periorais. Métodos: Foi realizada uma pesquisa nas bases de dados MEDLINE, Google acadêmico e LILACS utilizando-se os seguintes critérios: artigos publicados na íntegra, no período de 2000 a 2016, em inglês, português e espanhol, case report, classical articles e reviews sobre o tema utilizando os seguintes descritores: body piercing, risks management, complications, risk e seus mesh terms. Resultados: Foram incluídos um total de 39 artigos relevantes que cumpriam com todos os critérios. Foi observado que os locais mais frequentemente utilizados para a colocação de piercing oral são os lábios e a língua. As complicações incluem inflamação, infecções locais e sistêmicas, lesões mucocutâneas, lesões vasculares, trauma dental, problemas periodontais, reações de hipersensibilidade, disfonia, deglutição e aspiração do piercing, e até morte etc. Conclusão: Conclui-se que o cirurgião dentista deve exercer um papel importante na orientação da população em geral sobre os riscos e as complicações associadas ao uso de piercing oral, visando evitar tal prática ou minimizar ao máximo os riscos e as complicações naqueles indivíduos que os possuem.

Prevention of gingival trauma : Oral hygiene devices and oral piercings

NARCIS (Netherlands)

Hoenderdos, N.L.

2017-01-01

Maintaining healthy teeth and soft oral tissues for life is important. Oral hygiene devices and oral piercings can damage the soft oral tissues. This thesis investigates the safety of manual toothbrushes, interdental brushes and rubber bristles interdental cleaners by analysing the gingival abrasion

Speckle Interferometry with the McMath-Pierce East Auxiliary Telescope

Science.gov (United States)

Harshaw, Richard; Ray, Jimmy; Douglass, David; Prause, Lori; Genet, Russell

2015-09-01

Engineering runs and tests on the McMath-Pierce 0.8 meter East Auxiliary telescope successfully configured the telescope for speckle interferometry observations of close visual double stars. This paper reports the procedure and results of the speckle analysis of four double stars.

Prepare for an SpR interview.

Science.gov (United States)

Garner, J P; Heppell, P S J

2003-03-01

By the time you attend an interview for a military SpR number you should have no real problems but it pays to be prepared. Begin preparations early, reading widely and talk to as many people as possible. Your consultants will have a useful viewpoint on the proceedings and may be able to help you refine your answers to the common questions. Arrive at your interview in a smart and timely fashion and answer questions with confidence and common sense. Avoid confrontation and bluff and be courteous at all times, whatever you may be feeling inside and thank the interview panel as you leave.

Development of surface plasmon resonance (SPR) biosensors for use in the diagnostics of malignant and infectious diseases

Science.gov (United States)

Firdous, S.; Anwar, S.; Rafya, R.

2018-06-01

Surface plasmon resonance (SPR) has become an important optical biosensing technology due to its real-time, label-free, and noninvasive nature. These techniques allow for rapid and ultra-sensitive detection of biological analytes, with applications in medical diagnostics, environmental monitoring, and agriculture. SPR is widely used in the detection of biomolecular interactions, and improvements are required for both sensitivity and in vivo uses for practical applications. In this study, we developed an SPR biosensor to provide a highly sensitive and specific approach to early-stage detection of viral and malignant diseases, such as cancer tumors, for which biomarker detection is very important. A cancer cell line (HeLa cells) with biomarker Rodamine 6G was experimentally analyzed in vitro with our constructed SPR biosensor. It was observed that the biosensor can offer a potentially powerful solution for tumor screening with dominant angular shift. The angular shift for both regents is dominant with a time curve at a wavelength of 632.8 nm of a He–Ne laser. We have successfully captured and detected a biomarker in vitro for cancer diagnostics using the developed instrument.

[Development of public health regulations for tattooing and piercing and their realization].

Science.gov (United States)

Zolondek, U; Stelling, R; Hohmann, H

1998-03-01

In the course of prevention of infectious diseases the Public Health office of the city of Bremen has made increase efforts to improve hygienic conditions in tattoo and piercing studios. Defined and practicable hygienic standards have been developed and formulated for and in cooperation with the studios. Supported by intense personal counselling of the studios the hygienic standards are now--after 6-9 months--widely accepted and increasingly observed in practice. This programme has been--as a crucial point--supplemented by intense information for the general public and the customers of the studios in order to support (and control) the practice of hygienic standards in tattooing and piercing also from this point of view.

Riveted Lap Joints in Aircraft Fuselage Design, Analysis and Properties

CERN Document Server

Skorupa, Andrzej

2012-01-01

Fatigue of the pressurized fuselages of transport aircraft is a significant problem all builders and users of aircraft have to cope with for reasons associated with assuring a sufficient lifetime and safety, and formulating adequate inspection procedures. These aspects are all addressed in various formal protocols for creating and maintaining airworthiness, including damage tolerance considerations. In most transport aircraft, fatigue occurs in lap joints, sometimes leading to circumstances that threaten safety in critical ways. The problem of fatigue of lap joints has been considerably enlarged by the goal of extending aircraft lifetimes. Fatigue of riveted lap joints between aluminium alloy sheets, typical of the pressurized aircraft fuselage, is the major topic of the present book. The richly illustrated and well-structured chapters treat subjects such as: structural design solutions and loading conditions for fuselage skin joints; relevance of laboratory test results for simple lap joint specimens to rive...

Piercing and tattoos in adolescents: legal and medico-legal implications

Directory of Open Access Journals (Sweden)

Conti Adelaide

2018-04-01

Full Text Available Non-therapeutic body modification interventions are permitted within the limits of the use of one’s own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents.

The Development of a Portable SPR Bioanalyzer for Sensitive Detection of Escherichia coli O157:H7

Directory of Open Access Journals (Sweden)

Shun Wang

2016-11-01

Full Text Available The purpose of this study was to develop a portable surface plasmon resonance (SPR bioanalyzer for the sensitive detection of Escherichia coli O157:H7 in comparison with an enzyme-linked immunosorbent assay (ELISA. The experimental setup mainly consisted of an integrated biosensor and a homemade microfluidic cell with a three-way solenoid valve. In order to detect Escherichia coli O157:H7 using the SPR immunoassay, 3-mercaptopropionic acid (3-MPA was chemisorbed onto a gold surface via covalent bond for the immobilization of biological species. 1-ethyl-3-(3-dimethylaminopropyl carbodiimide hydrochloride (EDC and N-hydroxysuccinimide (NHS were used as crosslinker reagents to enable the reaction between 3-MPA and Escherichia coli O157:H7 antibodies by covalent –CO–NH– amide bonding. The experimental results were obtained from the Escherichia coli O157:H7 positive samples prepared by 10-, 20-, 40-, 80-, and 160-fold dilution respectively, which show that a good linear relationship with the correlation coefficient R of 0.982 existed between the response units from the portable SPR bioanalyzer and the concentration of Escherichia coli O157:H7 positive samples. Moreover, the theoretical detection limit of 1.87 × 103 cfu/mL was calculated from the positive control samples. Compared with the Escherichia coli O157:H7 ELISA kit, the sensitivity of this portable SPR bioanalyzer is four orders of magnitude higher than the ELISA kit. The results demonstrate that the portable SPR bioanalyzer could provide an alternative method for the quantitative and sensitive determination of Escherichia coli O157:H7 in field.

Novel determination of cadmium ions using an enzyme self-assembled monolayer with surface plasmon resonance

International Nuclear Information System (INIS)

May May, Lee; Russell, David A.

2003-01-01

The activity of the enzyme urease is known to be inhibited by the heavy metal cadmium. The binding of cadmium to urease and the consequent changes of the enzyme structure are the basis of the surface plasmon resonance (SPR) biosensing system reported herein. To facilitate the formation of a self-assembled monolayer (SAM) of the urease on gold-coated glass SPR sensor disks, the enzyme has been modified with N-succinimidyl 3-(2-pyridyldithiol) propionate (SPDP). The urease monolayer was exposed to trace levels of cadmium ions and monitored by SPR. From circular dichroism (CD) data, it is believed that the conformation of the active nickel site of the urease changes upon binding of the cadmium ions. It is this change of the enzyme monolayer, measured by SPR, which has been related to the cadmium ion concentration in the range of 0-10 mg l -1 . These data are the first report of a SPR biosensor capable of detecting metal ions

The behavior of crude oil spot and futures prices around OPEC and SPR announcements: An event study perspective

International Nuclear Information System (INIS)

Demirer, Riza; Kutan, Ali M.

2010-01-01

This paper examines the informational efficiency of crude oil spot and futures markets with respect to OPEC conference and U.S. Strategic Petroleum Reserve (SPR) announcements. We employ the event study methodology to examine the abnormal returns in crude oil spot and futures markets around OPEC conference and SPR announcement dates between 1983 and 2008. Our findings regarding OPEC announcements indicate an asymmetry in that only OPEC production cut announcements yield a statistically significant impact with the impact diminishing for longer maturities. We also find that the persistence of returns following OPEC production cut announcements creates substantial excess returns to investors who take long positions on the day following the end of OPEC conferences. In the case of SPR announcements, we find that the government's use of this program initiates a short-run market reaction following the announcement date. Furthermore, our tests of cumulative abnormal returns suggest that the market reacts efficiently to SPR announcements providing support for the use of the strategic reserves as a tool to stabilize the oil market. Our findings have significant policy implications for investors and are useful in designing effective energy policy strategies.

The doctrine of piercing the corporate veil: Its legal and judicial ...

African Journals Online (AJOL)

, it is found that Ethiopian company law, though not sufficient, provides some clear grounds of piercing the corporate veil and certain possible grounds which may call for the application of the doctrine. It is also argued that Ethiopian courts ...

Comparison of the CPU and memory performance of StatPatternRecognitions (SPR) and Toolkit for MultiVariate Analysis (TMVA)

International Nuclear Information System (INIS)

Palombo, G.

2012-01-01

High Energy Physics data sets are often characterized by a huge number of events. Therefore, it is extremely important to use statistical packages able to efficiently analyze these unprecedented amounts of data. We compare the performance of the statistical packages StatPatternRecognition (SPR) and Toolkit for MultiVariate Analysis (TMVA). We focus on how CPU time and memory usage of the learning process scale versus data set size. As classifiers, we consider Random Forests, Boosted Decision Trees and Neural Networks only, each with specific settings. For our tests, we employ a data set widely used in the machine learning community, “Threenorm” data set, as well as data tailored for testing various edge cases. For each data set, we constantly increase its size and check CPU time and memory needed to build the classifiers implemented in SPR and TMVA. We show that SPR is often significantly faster and consumes significantly less memory. For example, the SPR implementation of Random Forest is by an order of magnitude faster and consumes an order of magnitude less memory than TMVA on Threenorm data.

Comparative analysis of the tardigrade feeding apparatus: adaptive convergence and evolutionary pattern of the piercing stylet system

Directory of Open Access Journals (Sweden)

Roberto Guidetti

2013-03-01

Full Text Available A thorough analysis of the cuticular parts of tardigrade feeding apparatuses was performed in order to provide a more complete understanding of their evolution and their potential homologies with other animal phyla (e.g. Cycloneuralia and Arthropoda. The buccal- pharyngeal apparatuses of eight species belonging to both Eutardigrada and Heterotardigrada were studied using light and scanning electron microscopy. This study supports and completes a previous study on the relationships between form and function in the buccalpharyngeal apparatus of eutardigrades. The common sclerified structures of the tardigrade buccal-pharyngeal apparatus are: a buccal ring connected to a straight buccal tube, a buccal crown, longitudinal thickenings within the pharynx, and a stylet system composed of piercing stylets within stylet coats, and stylet supports. Specifically, heterotardigrades (Echiniscoidea have a narrow buccal tube; long piercing stylets, each with a longitudinal groove, that cross one another before exiting the mouth; pharyngeal bars and secondary longitudinal thickenings within the pharynx. In contrast, eutardigrades have stylets which are shorter than the buccal tube; Parachela have pharyngeal apophyses and placoids within the pharynx, while Apochela lack a buccal crown and cuticular thickenings within the pharynx, the buccal tube is very wide, and the short stylets are associated with triangular-shaped stylet supports. In both classes, when the piercing stylet tips emerge from the mouth to pierce food, the buccal tube opening is almost completely obstructed, which may hinder food uptake. In heterotardigrades, the crossing of the piercing stylets may further decrease food uptake, however this disadvantage may have been reduced in echiniscids by the evolution of a long buccal tube and long stylets able to run more parallel to the buccal tube. In contrast, eutardigrades evolved different strategies. In the order Apochela and in several

Vurdering af omfang og konsekvenser af sprøjtning og gødskning af § 3-beskyttede naturarealer

DEFF Research Database (Denmark)

Strandberg, Morten Tune; Bak, Jesper Leth; Bladt, Jesper Stentoft

2012-01-01

Det er overvejende de ferske enge, der gødskes og sprøjtes, hvorimod dette kun undtagelsesvist er konstateret på andre naturtyper som overdrev og heder m.m. De ferske enge er samtidig den mest udbredte § 3-naturtype. Behandling i form af gødskning og sprøjtning foregår anslået på op til 20 % af a...

Experimental investigation of piercing of high-strength steels within a critical range of slant angle

Science.gov (United States)

Senn, S.; Liewald, M.

2017-09-01

Deep drawn parts often do have complex designs and, therefore, must be trimmed or punched subsequently in a second stage. Due to the complex part geometry, most punching areas do reveal critical slant angle (angle between part surface and ram movement direction) different to perpendicular direction. Piercing within a critical range of slant angle may lead to severe damage of the cutting tool. Consequently, expensive cam units are required to transform the ram moving direction in order to perform the piercing process perpendicularly to the local part surface. For modern sheet metals, however, the described critical angle of attack has not been investigated adequately until now. Therefore, cam units are used in cases in which regular piercing with high slant angle wouldn’t be possible. Purpose of this study is to investigate influencing factors and their effect on punch damage during piercing of high strength steels with slant angles. Therefore, a modular shearing tool was designed, which allows to simply switch die parts to vary cutting clearance and cutting angle. The target size of the study is to measure the lateral deviation of the punch which is monitored by an eddy current sensor. The sensor is located in the downholder and measures the lateral punch deviation in-line during manufacturing. The deviation is mainly influenced by slant angle of workpiece surface. In relation to slang angle and sheet thickness the clearance has a small influence on the measured punch deflection.

Tattooing, permanent makeup and piercing in Amsterdam; guidelines, legislation and monitoring

NARCIS (Netherlands)

Worp, J.; Boonstra, A.; Coutinho, R. A.; van den Hoek, J. A. R.

2006-01-01

Tattooing, body piercing and permanent makeup are increasing in popularity. Here, we describe the procedures involved in these practices, their risks, the content of guidelines developed by the Municipal Health Service in Amsterdam (the Netherlands) to reduce infection risks, the legislation in the

[Tattoos and piercings: motives for body modification in women suffering from borderline symptomatology].

Science.gov (United States)

Höhner, Gesche; Teismann, Tobias; Willutzki, Ulrike

2014-02-01

Do women suffering from borderline symptomatology differ from women without these symptoms regarding their motives for body modifications?A sample of 289 women with body modifications were questioned about their tattoos, piercings and motives for body modifications as well as about symptoms of borderline personality disorder. Women with borderline symptomatology were compared to women without borderline symptomatology concerning the extent of and motives for body modification.The 2 groups showed no differences in regard to amount and extent of body modifications. The "borderline"-group considered individuality, coping and management of negative life-events to be more crucial reasons for body modification than the non-borderline females.The degree of a person's body modification is not a feasible indicator for psychopathological strain. Though, for people with borderline tendency body modification may serve as a coping strategy similar to self-injury. © Georg Thieme Verlag KG Stuttgart · New York.

Analysis of Ventilation Regimes of the Oblique Wedge-Shaped Surface Piercing Hydrofoil During Initial Water Entry Process

Directory of Open Access Journals (Sweden)

Ghadimi Parviz

2018-03-01

Full Text Available The suction side of a surface piercing hydrofoil, as a section of a Surface Piercing Propeller (SPP, is usually exposed to three phases of flow consisting air, water, and vapour. Hence, ventilation and cavitation pattern of such section during the initial phase of water entry plays an essential role for the propeller’s operational curves. Accordingly, in the current paper a numerical simulation of a simple surface piercing hydrofoil in the form of an oblique wedge is conducted in three-phase environment by using the coupled URANS and VOF equations. The obtained results are validated against water entry experiments and super-cavitation tunnel test data. The resulting pressure curves and free surface profiles of the wedge water entry are presented for different velocity ratios ranging from 0.12 to 0.64. Non-dimensional forces and efficiency relations are defined in order to present the wedge water entry characteristics. Congruent patterns are observed between the performance curves of the propeller and the wedge in different fully ventilated or partially cavitated operation modes. The transition trend from fully ventilated to partially cavitated operation of the surface piercing section of a SPP is studied and analyzed through wedge’s performance during the transitional period.

El uso del piercing en la cavidad bucal de adolescentes

Directory of Open Access Journals (Sweden)

Mercedes Haces Acosta

2014-04-01

Full Text Available Introducción: el uso del piercing intraoral en los adolescentes constituye una amenaza para la salud bucal. Objetivo: caracterizar el uso del piercing en la cavidad bucal de los adolescentes desde el punto de vista clínico y epidemiológico. Material y método: se realizó un estudio descriptivo transversal en el policlínico Dr. "Modesto Gómez Rubio" del municipio San Juan y Martínez, Pinar del Río, en el período comprendido de septiembre del 2011 a enero del 2013. El universo estuvo conformado por 400 adolescentes que acudieron al servicio del policlínico de los cuales 250 constituyeron la muestra, seleccionada a través del método aleatorio simple. Se les realizó el examen bucal, como medida de resumen se utilizaron el número absoluto y el porcentaje. Resultados: se pudo constatar que de 250 adolescentes examinados 34 presentaban perforaciones intraorales para un 13,6%, de ellos 24 son masculinos para un 70,59% y 10 femeninas representando el 29,41%, la edad de mayor uso de 15 y 18 años con 31 para un 21,85, los efectos nocivos de mayor frecuencia la gingivitis crónica con el 52,94% , seguidas por las fracturas dentarias con el 47,06%, el 97% respondieron que su motivación era la moda. Conclusiones: el uso del piercing en la cavidad bucal de los adolescentes estudiados se caracteriza por manifestarse con mayor frecuencia en las edades entre 15 y 18 años, con predominio del sexo masculino y el efecto nocivo más frecuente la enfermedad gingivitis crónica, seguidas por las fracturas dentarias, motivación la moda.

Tungsten versus depleted uranium for armour-piercing penetrators

International Nuclear Information System (INIS)

Johnson, P.K.

1983-01-01

Tungsten alloys have been widely used in the production of armour-piercing (AP) penetrators for defense purposes for the past 40 years. In recent years, however, depleted uranium (DU) has also been utilised for this application. Both materials exhibit high density and strength, two properties necessary for kinetic-energy projectiles to penetrate armour on tanks and other vehicles. The facts, however, support the view that tungsten can and should be utilised as the primary material for most armour-defeating ordnance applications. (author)

Tattoos and piercings: a review for the emergency physician.

Science.gov (United States)

Urdang, Michael; Mallek, Jennifer T; Mallon, William K

2011-11-01

Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM) adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications.

SPR based hybrid electro-optic biosensor for β-lactam antibiotics determination in water

Science.gov (United States)

Galatus, Ramona; Feier, Bogdan; Cristea, Cecilia; Cennamo, Nunzio; Zeni, Luigi

2017-09-01

The present work aims to provide a hybrid platform capable of complementary and sensitive detection of β-lactam antibiotics, ampicillin in particular. The use of an aptamer specific to ampicillin assures good selectivity and sensitivity for the detection of ampicillin from different matrice. This new approach is dedicated for a portable, remote sensing platform based on low-cost, small size and low-power consumption solution. The simple experimental hybrid platform integrates the results from the D-shape surface plasmon resonance plastic optical fiber (SPR-POF) and from the electrochemical (bio)sensor, for the analysis of ampicillin, delivering sensitive and reliable results. The SPR-POF already used in many previous applications is embedded in a new experimental setup with fluorescent fibers emitters, for broadband wavelength analysis, low-power consumption and low-heating capabilities of the sensing platform.

Pierce-type dispersion relation for an intense relativistic electron beam interacting with a slow-wave structure

International Nuclear Information System (INIS)

Chen, C.

1994-01-01

A Pierce-type dispersion relation is derived for the interaction of an intense relativistic electron beam with a cylindrical slow-wave structure of arbitrary corrugation depth. It is shown that near a resonance, the Pierce parameter can be expressed in terms of the vacuum dispersion function and the beam current. The dispersion relation is valid in both the low-current (Compton) regime and the high-current (Raman) regime. The dispersion characteristics of the interaction, such as the linear instability growth rate and bandwidth, are analyzed for both regimes

Evaluation of Gd{sub 2}O{sub 2}S:Pr granular phosphor properties for X-ray mammography imaging

Energy Technology Data Exchange (ETDEWEB)

David, S.; Michail, C. [Department of Biomedical Engineering, Technological Educational Institute (TEI) of Athens, Ag. Spyridonos Street, 122 10 Egaleo (Greece); Seferis, I. [Department of Biomedical Engineering, Technological Educational Institute (TEI) of Athens, Ag. Spyridonos Street, 122 10 Egaleo (Greece); Faculty of Chemistry, Wroclaw University, 14F Joliot-Curie Street, 50-383 Wroclaw (Poland); Valais, I.; Fountos, G.; Liaparinos, P.; Kandarakis, I. [Department of Biomedical Engineering, Technological Educational Institute (TEI) of Athens, Ag. Spyridonos Street, 122 10 Egaleo (Greece); Kalyvas, N., E-mail: nkalyvas@teiath.gr [Department of Biomedical Engineering, Technological Educational Institute (TEI) of Athens, Ag. Spyridonos Street, 122 10 Egaleo (Greece)

2016-01-15

Phosphor materials are widely used in X-ray medical imaging detector applications, coupled with suitable photoreceptors. Upon the most demanding imaging modality is X-ray mammography, since the best defense against breast cancer is its early detection. A material suitable as a mammographic detector should efficiently absorb X-ray photons and transform them to optical photons, so as to minimize breast dose. The aim of the present study was to investigate the X-ray absorption efficiency and the absolute efficiency (AE), defined as the output optical photon power divided by the incident exposure, of Gd{sub 2}O{sub 2}S:Pr powder scintillator. For the purposes of this study, three scintillating screens with coating thicknesses, 34.1, 46.0 and 81.5 mg/cm{sup 2} respectively, were prepared in our laboratory from Gd{sub 2}O{sub 2}S:Pr powder (Phosphor Technology, Ltd.) by sedimentation on silica substrates. The quantum detection efficiency (QDE), the energy absorption efficiency (EAE), the spectral matching factor and the absolute efficiency (AE) were evaluated for X-ray mammographic conditions. Furthermore theoretical models were utilized to investigate the optical photon transmission properties through the phosphor mass. Gd{sub 2}O{sub 2}S:Pr presented high X-ray absorption properties and good spectral compatibility with several photoreceptors. It may be utilized for X-ray mammographic imaging if it is put in conjunction with a sensitive photoreceptor, so as to enhance Gd{sub 2}O{sub 2}S:Pr light emission properties. - Highlights: • Gd{sub 2}O{sub 2}S:Pr phosphor evaluated for mammography detectors. • The X-ray absorption efficiency was found high. • Spectral matching compatibility found for several photoreceptors. • X-ray absolute efficiency measured smaller than other phosphors. • Optical diffusion length and the light transmission per layer was theoretically calculated.

Pierce gain analysis for a sheet beam in a rippled waveguide traveling-wave tube

International Nuclear Information System (INIS)

Carlsten, Bruce E.

2001-01-01

A Pierce-type mode analysis is presented for a planar electron beam in a rippled planar waveguide. This analysis describes the gain of a traveling-wave tube consisting of that geometry. The dispersion relation is given by the determinant of a matrix based on the coupling of different free-space modes through the boundary conditions. For the case of high-frequency, low-power amplifiers, the dispersion relation reduces to a simple cubic expression for the Compton regime, leading to three roots analogous to the Pierce solution of a standard traveling-wave tube. The analysis shows that this type of traveling-wave tube is capable of very high gain at extremely high frequencies

Teaching Business Law from Literature: Lessons to Be Learned from the Novel "Mildred Pierce" and the Road to Entrepreneurial Success

Science.gov (United States)

Labatt, Joseph; Forrest, Michael

2016-01-01

James M. Cain used his literary skills to incorporate business and business law concepts into a best-selling novel, "Mildred Pierce." Set in the Great Depression era, "Mildred Pierce" tells the story of a divorced woman who raises two daughters on her own, while building a restaurant and bakery business. Even in today's popular…

Configuration-controlled Au nanocluster arrays on inverse micelle nano-patterns: versatile platforms for SERS and SPR sensors

Science.gov (United States)

Jang, Yoon Hee; Chung, Kyungwha; Quan, Li Na; Špačková, Barbora; Šípová, Hana; Moon, Seyoung; Cho, Won Joon; Shin, Hae-Young; Jang, Yu Jin; Lee, Ji-Eun; Kochuveedu, Saji Thomas; Yoon, Min Ji; Kim, Jihyeon; Yoon, Seokhyun; Kim, Jin Kon; Kim, Donghyun; Homola, Jiří; Kim, Dong Ha

2013-11-01

Nanopatterned 2-dimensional Au nanocluster arrays with controlled configuration are fabricated onto reconstructed nanoporous poly(styrene-block-vinylpyridine) inverse micelle monolayer films. Near-field coupling of localized surface plasmons is studied and compared for disordered and ordered core-centered Au NC arrays. Differences in evolution of the absorption band and field enhancement upon Au nanoparticle adsorption are shown. The experimental results are found to be in good agreement with theoretical studies based on the finite-difference time-domain method and rigorous coupled-wave analysis. The realized Au nanopatterns are exploited as substrates for surface-enhanced Raman scattering and integrated into Kretschmann-type SPR sensors, based on which unprecedented SPR-coupling-type sensors are demonstrated.Nanopatterned 2-dimensional Au nanocluster arrays with controlled configuration are fabricated onto reconstructed nanoporous poly(styrene-block-vinylpyridine) inverse micelle monolayer films. Near-field coupling of localized surface plasmons is studied and compared for disordered and ordered core-centered Au NC arrays. Differences in evolution of the absorption band and field enhancement upon Au nanoparticle adsorption are shown. The experimental results are found to be in good agreement with theoretical studies based on the finite-difference time-domain method and rigorous coupled-wave analysis. The realized Au nanopatterns are exploited as substrates for surface-enhanced Raman scattering and integrated into Kretschmann-type SPR sensors, based on which unprecedented SPR-coupling-type sensors are demonstrated. Electronic supplementary information (ESI) available: TEM image and UV-vis absorption spectrum of citrate-capped Au NPs, AFM images of Au NC arrays on the PS-b-P4VP (41k-24k) template, ImageJ-analyzed results of PS-b-P4VP (41k-24k)-templated Au NC arrays, calculated %-surface coverage values, SEM images of Au NC arrays on the PS-b-P2VP (172k-42k

Tattoos and Piercings: A Review for the Emergency Physician

Science.gov (United States)

Urdang, Michael; Mallek, Jennifer T; Mallon, William K

2011-01-01

Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM) adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications. PMID:22224126

The classical Pierce diode: Using particle simulations on linear and nonlinear behavior and final states

International Nuclear Information System (INIS)

Crystal, T.L.; Kuhn, S.; Birdsall, C.K.

1984-01-01

The classical Pierce diode is a simple 1-d system of two shorted metal plates, a cold beam of electrons injected from one side and a neutralizing background of rigid ions. While the plasma medium is technically stable, the finiteness of the Pierce system allows stable and unstable operation. It is usefully studied as an archetypical bounded plasma system, related e.g., to Q-machines, particle accelerators, thermionic converters. New particle simulations of the Pierce diode have successfully recovered many novel linear phenomena including the dominant linear eigenmodes (seen in the internal electrostatic fields), and the dominant and subdominant eigenfrequencies, (seen both in the internal electrostatics and in the external circuit current, J/sub ext/(t)). These simulation results conform very well to detailed predictions of a new linear analysis. The final (nonlinear) state recovered can show critical dependence on initial (linear perturbation) conditions, and can be made steady-state (d.c.) or periodic-oscillatory by simply changing the initial conditions by a factor of 10/sup -4/ or less. A third class of final state is also possible which has oscillations which seem to be nonperiodic

College students with tattoos and piercings: motives, family experiences, personality factors, and perception by others.

Science.gov (United States)

Forbes, G B

2001-12-01

The motives, family experiences, and personality characteristics of 341 college students with and without tattoos or piercings were studied. Participants completed Lippa's 1991 measures of the Big Five personality factors, a shortened version of the Body Cathexis Scale, a series of questions about their childhood experiences, and questions about risk-taking behaviors. In addition, reasons to have or not have body modifications and the perceptions of people with body modifications were investigated. Of the 116 men and 186 women, 25% and 33%, respectively, had at least one tattoo or body piercing. There were very few differences in the childhood experiences or personality characteristics of people with or without body modifications. Although people with body modifications did not differ from people without modifications on the Big Five personality measures, people without modifications perceived people with modifications as much different from themselves on these measures. These results indicate that tattoos and piercings in college students are associated with significantly more risk-taking behavior, greater use of alcohol and marijuana, and less social conformity. However, the traditional stereotype that body modifications are indicators of social or personal pathology does not describe contemporary college students.

Surface plasmon resonance spectroscopic study of UV-addressable phenylalanine sensing based on a self-assembled spirooxazine derivative monolayer

International Nuclear Information System (INIS)

Suk, Shinae; Suh, Hee-Jung; Gun An, Won; Kim, Jae-Ho; Jin, Sung-Ho; Kim, Sung-Hoon; Gal, Yeong-Soon; Koh, Kwangnak

2004-01-01

Light-addressable compounds are very interesting due to the possibilities of their practical use such as optical switches and memories or variable transmission materials. For example, transportation of phenylalanine across liposomal bilayers mediated by a photoresponsive carrier like spirooxazine through electrostatic interaction between phenylalanine and spirooxazine derivative. Thus, the spirooxazine is expected to form a UV-addressable phenylalanine sensing interface. In this study, we prepared phenylalanine sensing interface of a spirooxazine derivative by self-assembly technique and evaluated interaction between a spirooxazine moiety and phenylalanine with a surface plasmon resonance (SPR). The refractive index change of monolayer caused by interaction between a spirooxazine derivative and phenylalanine led to the SPR angle shifts upon UV irradiation. The SPR angle shift increased with increasing the concentration of phenylalanine solution. These results indicated that the spirooxazine derivative self-assembled monolayer (SAM) has an application potential for UV-addressable phenylalanine sensing

To the theory of the Pierce instability of neutralized electron flows

International Nuclear Information System (INIS)

Ignatov, A.M.; Rukhadze, A.A.

1984-01-01

The Pierce instability of a nonrelativistic electron beam in an exernal fi inite magnetic field is investigated. Analytical expressions for a critical electron density in limiting cases of strong or weak magnetic field have been fo ound. The critical electron density is shown to increase with a decrease in the magnetic field strength

Complications of oral and peri-oral piercings: a summary of case reports

NARCIS (Netherlands)

Hennequin-Hoenderdos, N.L.; Slot, D.E.; van der Weijden, G.A.

2011-01-01

Objective: To systemically search the literature for case reports concerning adverse effects associated with oral and peri-oral piercings on oral health and/or general health. Material and methods: MEDLINE and the Cochrane Central Register of Controlled Trials (CENTRAL) were searched up through 1

27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Manufacture, importation... COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture, importation and sale of armor piercing ammunition. No person shall manufacture or import, and no manufacturer...

Piercing the corporate veil in swedish law : points of view de lege lata and de lege ferenda

OpenAIRE

Sundby, Anna

2000-01-01

The basic principle for limited companies is that the owners are not liable for the debts of the company. To protect the creditors of the company, however, a theory of personal liability for the owners has evolved, the so called piercing the corporate veil theory. For decades there have been disagreements wether or not it would be motivated to legislate the theory of piercing the corporate veil, and what this legislation might look like. The basic problems in my essay are: Is there a need to ...

Body art in adolescents: paint, piercings, and perils.

Science.gov (United States)

Desai, Neerav A; Smith, Michael L

2011-04-01

Tattoos and body piercings are becoming increasingly popular, particularly in adolescents and young adults. As the frequency of body art increases, so does the potential for adverse outcomes. Reasons for obtaining body art include need for individual expression and peer support. Techniques for tattooing are advancing, along with development of newer inks that may be less reactive. When patients become tired of their body art, or develop complications from the art itself, removal needs to be considered. Newer laser modalities may provide tattoo removal options with less scarring potential.

Pierced Lasso Bundles are a new class of knot-like motifs.

Directory of Open Access Journals (Sweden)

Ellinor Haglund

2014-06-01

Full Text Available A four-helix bundle is a well-characterized motif often used as a target for designed pharmaceutical therapeutics and nutritional supplements. Recently, we discovered a new structural complexity within this motif created by a disulphide bridge in the long-chain helical bundle cytokine leptin. When oxidized, leptin contains a disulphide bridge creating a covalent-loop through which part of the polypeptide chain is threaded (as seen in knotted proteins. We explored whether other proteins contain a similar intriguing knot-like structure as in leptin and discovered 11 structurally homologous proteins in the PDB. We call this new helical family class the Pierced Lasso Bundle (PLB and the knot-like threaded structural motif a Pierced Lasso (PL. In the current study, we use structure-based simulation to investigate the threading/folding mechanisms for all the PLBs along with three unthreaded homologs as the covalent loop (or lasso in leptin is important in folding dynamics and activity. We find that the presence of a small covalent loop leads to a mechanism where structural elements slipknot to thread through the covalent loop. Larger loops use a piercing mechanism where the free terminal plugs through the covalent loop. Remarkably, the position of the loop as well as its size influences the native state dynamics, which can impact receptor binding and biological activity. This previously unrecognized complexity of knot-like proteins within the helical bundle family comprises a completely new class within the knot family, and the hidden complexity we unraveled in the PLBs is expected to be found in other protein structures outside the four-helix bundles. The insights gained here provide critical new elements for future investigation of this emerging class of proteins, where function and the energetic landscape can be controlled by hidden topology, and should be take into account in ab initio predictions of newly identified protein targets.

Occupational accidents with piercing and cutting instruments in hospital nurses

OpenAIRE

Maria Helena Palucci Marziale; Maria Lúcia Carmo Cruz Robazzi

2004-01-01

Goals: To identify factors associated with occupational accidents caused by piercing and cutting instruments and to identify the consequences of these accidents.Methods: Descriptive field research. Data were obtained through semi-structured interviews with nurses who suffered accidents during one year in four hospitals at São Paulo State - Brazil. Results: factors associated with accidents were: work overload, poor quality material, inadequate disposal materials, professional negligence, clie...

Comparative SPR study on the effect of nanomaterials on the biological activity of adsorbed proteins

International Nuclear Information System (INIS)

Mei, Q.; Chen, Y.; Hong, J.; Chen, H.; Ding, X.; Yin, Y.; Koh, K.; Lee, J.

2012-01-01

Bioactivity of proteins is evaluated to test the adverse effects of nanoparticles interjected into biological systems. Surface plasmon resonance (SPR) spectroscopy detects binding affinity that is normally related to biological activity. Utilizing SPR spectroscopy, a concise testing matrix is established by investigating the adsorption level of bovine serum albumin (BSA) and anti-BSA on the surface covered with 11-mercaptoundecanoic acid (MUA); magnetic nanoparticles (MNPs) and single-walled carbon nanotubes (SWCNTs), respectively. The immunoactivity of BSA on MNPs and SWCNT decreased by 18 % and 5 %, respectively, compared to that on the gold film modified with MUA. This indicates that MNPs cause a considerable loss of biological activity of adsorbed protein. This effect can be utilized for practical applications on detailed biophysical research and nanotoxicity studies. (author)

Clinical research of the obstructive interface morphology of the inferior vena cava and the method of choice for taking the 'pierce membrane'

International Nuclear Information System (INIS)

Wei Ning; Zu Maoheng; Xu Hao; Gu Yuming; Li Guojun; Zhang Qingqiao; Xu Wei; Liu Hongtao

2008-01-01

Objective: To evaluate the relation between the morphology of the obstructive interface of the inferior vena cava (IVC)and the method of choice for taking the 'pierce membrane'. Methods: Interventional therapy was performed in 155 patients with obstruction of inferior vena cave during 2003-2005. The types of proximal part and distal end of obstruction were classified on the base of inferior vane cavography and divid[d into two groups accordingly. The principle of taking 'pierce membrane' whether as accending or descending route was decided by the morphology of the obstructive interface. The complication rates of taking 'pierce membrane' were compared between the two groups including one of 2003-2005 and another of 1990 -1997 as the control. Results: 155 cases were classified to 7 types according to morphology of inferior vena cava obstruction of the distal interface, the type of membrane with hole (32 cases), the dome type (50 cases), the taper type (17 cases), the horizontal type (13 cases), the inclination type (10 cases), the irregular type (19 eases)and the type of obstruction with communicating branches (14 cases). The morphologies of the proximal part of the obstruction were mainly divided into the type of membrane with hole, dome type, taper type and horizontal type. All the cases were successfully taken 'pierce membrane', without complication of pericardial effusion and abdominal bleeding. In control group of 150 Budd-Chiari syndrome cases with obstruction of inferior vena cava, the complications of taking 'pierce membrane' included mis puncture into pericardium (16 cases) and abdominal hemorrhage because of rupturing the inferior vena cava in 2 cases. Comparing the two groups, there was statistical significance with severe complications. Conclusions: 'Pierce membrane' interventional technique for the obstruction of inferior vena eava by coinciding the morphology of the obstructive interface with suitable piercing direction can not only raise successful

Stability Modification of SPR Silver Nano-Chips by Alkaline Condensation of Aminopropyltriethoxysilane

Directory of Open Access Journals (Sweden)

M. Ghorbanpour

2015-04-01

Full Text Available The Silver SPR chip was modified by alkaline-silane condensation with aminopropyltriethoxysilane (APTES in NaOH aqueous solution at different times. Silver sputtered slides coated with APTES were immersed in NaOH solution, enabling us to produce silver surfaces homogeneously covered with APTES. The surface properties of grafted APTES on sputtered silver surface as a occasion of time were studied using SPR analysis, AFM and contact angle measurement. The mechanical and chemical stability of samples was assayed by tape test and NaCl test. The answers show that hydrolysis and condensation of APTES are activated in alkaline solution and lead to formation of a protective APTES layer on the surface of silver. The morphology of APTES on silver surface is a function of coverage density that is altered by changing time. At short times (< 30 min, APTES molecules physically adsorb to the surface leads to weak protection. At higher condensation times, APTES molecules chemically bond to the surface and each other leads to better protection.

Pierce-type electron gun with a large concave LaB6 cathode

International Nuclear Information System (INIS)

Shintake, Tumoru; Ohba, Kunio; Matoba, Masaru; Katase, Akira

1981-01-01

A Pierce-type electron gun with a concave cathode of lanthanum hexaboride (LaB 6 ) 30 mm in diameter is described. At an accelerating voltage of 3 kV and a cathode temperature of 1340 0 C, a focussed electron beam of DC 300 mA was obtained. (author)

Improving Immunization Coverage in a Rural School District in Pierce County, Washington

Science.gov (United States)

Peterson, Robin M.; Cook, Carolyn; Yerxa, Mary E.; Marshall, James H.; Pulos, Elizabeth; Rollosson, Matthew P.

2012-01-01

Washington State has some of the highest percentages of school immunization exemptions in the country. We compared school immunization records in a rural school district in Pierce County, Washington, to immunization records in the state immunization information system (IIS) and parent-held records. Correcting school immunization records resulted…

Near Infrared Characterization of Hetero-Core Optical Fiber SPR Sensors Coated with Ta2O5 Film and Their Applications

Directory of Open Access Journals (Sweden)

Kazuhiro Watanabe

2012-02-01

Full Text Available This paper describes the characteristics of optical fiber sensors with surface plasmon resonance (SPR at 1,310 nm in which the scattering loss of silica optical fiber is low. SPR operation in the infrared wavelength range is achieved by coating a thin tantalum pentaoxide (Ta2O5 film. The novelty of this paper lies in the verification of how the hetero-core scheme could be operated as a commercial base candidate in the sense of easy fabrication, sufficient mechanical strength, and significant sensitivity as a liquid detector under the basis of a low loss transmission network in the near infrared wavelength region. The effect of Ta2O5 layer thickness has been experimentally revealed in the wavelength region extending to 1,800 nm by using the hetero-core structured optical fiber. SPR characterizations have been made in the wavelength region 1,000–1,300 nm, showing the feasible operation at the near infrared wavelength and the possible practical applications. In addition, the technique developed in this work has been interestingly applied to a multi-point water-detection and a water-level gauge in which tandem-connected SPR sensors system using hetero-core structured fibers were incorporated. The detailed performance characteristics are also shown on these applications.

Radicinin from Cochliobolus sp. inhibits Xylella fastidiosa, the causal agent of Pierce's Disease of grapevine.

Science.gov (United States)

Aldrich, Thomas J; Rolshausen, Philippe E; Roper, M Caroline; Reader, Jordan M; Steinhaus, Matthew J; Rapicavoli, Jeannette; Vosburg, David A; Maloney, Katherine N

2015-08-01

The fastidious phytopathogenic bacterium, Xylella fastidiosa, poses a substantial threat to many economically important crops, causing devastating diseases including Pierce's Disease of grapevine. Grapevines (Vitis vinifera L.) planted in an area under Pierce's Disease pressure often display differences in disease severity and symptom expression, with apparently healthy vines growing alongside the dying ones, despite the fact that all the vines are genetic clones of one another. Under the hypothesis that endophytic microbes might be responsible for this non-genetic resistance to X. fastidiosa, endophytic fungi were isolated from vineyard cvs. 'Chardonnay' and 'Cabernet Sauvignon' grown under high Pierce's Disease pressure. A Cochliobolus sp. isolated from a Cabernet Sauvignon grapevine inhibited the growth of X. fastidiosa in vitro. Bioassay-guided isolation of an organic extract of Cochliobolus sp. yielded the natural product radicinin as the major active compound. Radicinin also inhibited proteases isolated from the culture supernatant of X. fastidiosa. In order to assess structure-activity relationships, three semi-synthetic derivatives of radicinin were prepared and tested for activity against X. fastidiosa in vitro. Assay results of these derivatives are consistent with enzyme inactivation by conjugate addition to carbon-10 of radicinin, as proposed previously. Copyright © 2015 Elsevier Ltd. All rights reserved.

Determination and analysis of neutron flux distribution on radial Piercing beam port for utilization of Kartini research reactor

International Nuclear Information System (INIS)

Widarto

2002-01-01

Determination and analysis of neutron flux measurements on radial piercing beam port have been done as completion experimental data document and progressing on utilization of the Kartini research reactor purposes. The analysis and determination of the neutron flux have been carried out by using Au foils detector neutron activation analysis method which put on the radius of cross section (19 cm) and a long of radial piercing beam port (310 cm) Based on the calculation, distribution of the thermal neutron flux is around (8.3 ± 0.9) x 10 5 ncm -2 s -1 to (6.8 ± 0.5) x 10 7 ncm -2 s -1 and fast neutron is (5.0 ± 0.2) x 10 5 ncm -2 s -1 to (1.43 ± 0.6) x 10 7 ncm -2 s -1 . Analyzing by means of curve fitting method could be concluded that the neutron flux distribution on radial piercing beam port has profiled as a polynomial curve. (author)

Motivations for body piercings and tattoos - the role of sexual abuse and the frequency of body modifications.

Science.gov (United States)

Stirn, Aglaja; Oddo, Silvia; Peregrinova, Ludmila; Philipp, Swetlana; Hinz, Andreas

2011-12-30

Though the popularity of body modification increases, psychosocial data about practitioners of body piercing and tattooing are few and controversial. Most studies used semi-structured interviews and relatively small sample sizes. The aim of this study was to explore psychosocial background information (motivation, sexual abuse) for body modification practises based on a sufficiently large sample. A core group of 432 subjects with body piercings and/or tattoos (readers of a specialised magazine on body modification; mean age: 28 years) was investigated in this study using a 55-item questionnaire. The mean number of body modifications (piercings and tattoos) was nine. Participants with a history of sexual abuse and high users with more than 10 body modifications differed from those without these features with respect to several motivations and consequences of body modification. Participants with sexual abuse often stated that they wanted to overcome certain experiences, and high users were characterised by the feeling of an addiction to continue body modification. Clinicians should include questions on body modifications and their motives in anamnestic schedules. Copyright © 2011 Elsevier Ltd. All rights reserved.

Underwater piercing of a tunnel

Energy Technology Data Exchange (ETDEWEB)

Solvik, O.

1984-11-01

Norwegian consultants and contractors have been confronted with the task of blasting a final penetrating passage that will open the way for the water in a reservoir to flow through the hydropower turbines. Norway has almost certainly led in this area because of its special topographical and geological conditions. The glacial activities have created a number of natural and very deep lakes forming cheap reservoirs. Piercings at depths up to about 100 m have been performed. Problems tend to increase with depth, but unsuccessful penetration can occur at any depth. Secondary effects to consider include the danger of slides when the water level is lowered, wave erosion along the lowered new shoreline, erosion at all streams and rivers flowing into the lake and groundwater erosion in the newly exposed dry shoreline. Methods of penetration can be roughly divided into two categories: penetration against the open tunnel shaft (open system); and penetration against the closed tunnel shaft (closed system). 6 figures.

Design and development of a pierce electron gun

International Nuclear Information System (INIS)

Bhattacharjee, D.; Tiwari, R.; Nayak, B.; Tillu, A.R.; Jayaprakash, D.; Mishra, R.L.; Mittal, K.C.; Chakravarthy, D.P.; Gantayet, L.M.

2011-01-01

An electron gun is designed and developed using the Pierce configuration for the focusing electrode. Simulations were carried out using CST Particle Studio. The Gun is a thermionic type electron gun with indirect heating of the LaB6 cathode. The gun is capable of delivering a beam current of 500 mA at 50 kV with a beam size of less than 3.5 mm. It was tested on the gun test bench. This paper presents the gun design, particle simulations study, testing of the gun on test bench and integration with the ECIL 9 MeV linac. (author)

Reflectance spectra characteristics from an SPR grating fabricated by nano-imprint lithography technique for biochemical nanosensor applications

Science.gov (United States)

Setiya Pradana, Jalu; Hidayat, Rahmat

2018-04-01

In this paper, we report our research work on developing a Surface Plasmon Resonance (SPR) element with sub-micron (hundreds of nanometers) periodicity grating structure. This grating structure was fabricated by using a simple nano-imprint lithography technique from an organically siloxane polymers, which was then covered by nanometer thin gold layer. The formed grating structure was a very well defined square-shaped periodic structure. The measured reflectance spectra indicate the SPR wave excitation on this grating structure. For comparison, the simulations of reflectance spectra have been also carried out by using Rigorous Coupled-Wave Analysis (RCWA) method. The experimental results are in very good agreement with the simulation results.

Comparison of different photoresist buffer layers in SPR sensors based on D-shaped POF and gold film

Science.gov (United States)

Cennamo, Nunzio; Pesavento, Maria; De Maria, Letizia; Galatus, Ramona; Mattiello, Francesco; Zeni, Luigi

2017-04-01

A comparative analysis of two optical fiber sensing platforms is presented. The sensors are based on surface plasmon resonance (SPR) in a D-shaped plastic optical fiber (POF) with a photoresist buffer layer between the exposed POF core and the thin gold film. We show how the sensor's performances change when the photoresist layer changes. The photoresist layers proposed in this analysis are SU-8 3005 and S1813. The experimental results are congruent with the numerical studies and it is instrumental for chemical and bio-chemical applications. Usually, the photoresist layer is required in order to increase the performance of the SPR-POF sensor.

[Treatment of posterior cruciate ligament avulsion fracture with rivet-assisted hollow nail:a case-control study].

Science.gov (United States)

Zhu, Jia-Fu; Ma, Gou-Ping; Xu, Wei-Xing; Guo, Qiao-Feng; Liu, Hong

2017-04-25

To retrospectively investigate the clinical effect of the rivet-assisted hollow screw in the treatment of posterior cruciate ligament avulsion fracture. Total 49 patients with knee cruciate ligament avulsion fracture in the ending point of the ligament from January 2010 to December 2014 were divided into the treatment group and the control group. Thirty-one patients in treatment group were treated with rivet-assisted double cannulate nail, including 13 males and 18 females, ranging in age from 38 to 51 years old, with a mean of (40.6±5.1) years old; according to Meyers classification, 23 cases of type 2, 8 cases of type 3; 5 patients were caused by the low energy injury and 26 patients were caused by the high energy injury. Eighteen patients in control group were treated with double gold hollow screw fixation, including 5 males and 13 females, ranging in age from 36 to 52 years old, with an average age of (4.16±4.7) years old; according to Meyers classification, 14 cases of type 2 and 4 cases of type 3;2 patients were caused by the low energy injury and 16 patients were caused by the high energy injury. The operation time, postoperative complications, fracture healing time and the last AKS scoring system were compared between the two groups. All the patients were followed up, and the duration ranged from 12 to 24 months, with an average of 14.2 months. The patients in treatment group had no displacement of fracture fragments and internal fixation failure. The results of AKS score:pain was 48.1±1.5, activity was 21.3±2.7, stability was 20.9±2.5, walking ability was 47.3±1.9, under the stairs ability was 43.4±2.1, the total score was 190.7±2.9. There were 2 cases in control group had fracture fragment displacement and 1 patient had nail withdraw. The results of AKS score:pain was 40.1±2.2, activity was 20.1±0.2, stability was 18.1±3.2, walking ability was 46.3±1.7, under the stairs ability was 40.2 ±1.3, the total score was 180.2±1.4. Therefore, the

Development of a β-Lactoglobulin Sensor Based on SPR for Milk Allergens Detection

DEFF Research Database (Denmark)

Ashley, Jon; D'Aurelio, Roberta; Piekarska, Monika

2018-01-01

A sensitive and label-free surface plasmon resonance (SPR) based sensor was developed in this work for the detection of milk allergens. β-lactoglobulin (BLG) protein was used as the biomarker for cow milk detection. This is to be used directly in final rinse samples of cleaning in-place (CIP) sys...

Effect of the thermal spread in a beam on the radiative Pierce instability

International Nuclear Information System (INIS)

Klochkov, D.N.; Pekar, M.Yu.; Rukhadze, A.A.

1999-01-01

The linear dynamics of the radiative Pierce instability in a single plane in the case of the relativistic electron beam with T temperature stabilized through a strong magnetic field, is considered. It is shown that the instability increment decreases with the thermal spread growth [ru

Konsep Dasar Semiotika Dalam Komunikasi Massa Menurut Charles Sanders Pierce

OpenAIRE

Suherdiana, Dadan

2008-01-01

Sign or symbol in mass communication is not something with without makna. Nevertheless, it is not easy for anyone to can comprehend that sign. Minimally, that is a method for it, is named semiotic. Charles Sanders Pierce introduce pragmatism for this method. For him, semiotics have three researches area: syntactic semiotic, semantic semiotic and pragmatic semiotic. Sintaktic semiotic, teach the relation between sign with others sign; semantic semiotic, teach the relation and consequence in in...

A SPR-based immunosensor for the detection of isoproturon.

Science.gov (United States)

Gouzy, Marie-Françoise; Kess, Melanie; Krämer, Petra M

2009-02-15

The proof of principle of a reusable surface plasmon resonance (SPR)-based immunosensor for the monitoring of isoproturon (IPU), a selective and systemic herbicide, is presented. The detecting rat monoclonal anti-isoproturon antibody (mAb IOC 7E1) was reversibly immobilized through the use of a capture mouse anti-rat (kappa-chain) monoclonal antibody (mAb TIB 172), which was covalently immobilized on the sensor chip surface. Such strategy features a controlled binding of the captured detecting antibody as well as facilitates the surface regeneration. The capture of the anti-IPU mAb by the antibody (TIB 172) coated sensor surface could be carried out up to 120 times (immobilization/regeneration cycles) without any evidence of activity loss. With a high test midpoint and a low associated SPR signal, the direct detection format was shown to be unsuitable for the routine analysis of isoproturon. However, the limit of detection (LOD) could be easily enhanced by using a strategy based on a surface competition assay, which improved all immunosensor parameters. Moreover, the sensitivity and working range of the indirect format were found to be dependent on the surface density of the anti-IPU mAb IOC 7E1. As expected for competitive formats, the lowest surface coverage (0.5 ng/mm(2)) allowed a lower detection of the herbicide isoproturon with a calculated LOD of 0.1 microg/l, an IC(50) (50% inhibition) of 5.3+/-0.6 microg/l, and a working range (20-80% inhibition) of 1.3-16.3 microg/l.

Modelling and Experimental Testing of Hybrid Joints Made of: Aluminium Adherends, Adhesive Layers and Rivets for Aerospace Applications

Directory of Open Access Journals (Sweden)

Sadowski T.

2017-09-01

Full Text Available The contemporary demands in different branches of engineering require application of new multi-component materials and structural systems. Appropriately chosen joining technology can offer significant enhancement of structural system performance in terms of effectiveness, reliability, safety and other design criteria. The modern applications of complex joints are of great technological interest as they permit to combine and to enhance the individual effects of each kind of joint. This is of great importance for modern applications in different branches of engineering: aerospace, mechanical and civil. Therefore in this paper we will focus on the analysis of mechanical response of adhesive joint of aluminium strips reinforced by rivets. The aim of the paper is to investigate experimentally the mechanical behaviour of adhesive joint of aluminium strips reinforced by rivets for industrial applications in aerospace. The considered joint was subjected to uniaxial loading. The tests in this paper were performed for: • classical adhesive joint in order to investigate material parameters for numerical modelling of the hybrid joint • hybrid joining of the structural elements in order to investigate the reinforcement effect. The experiments with application of digital image ARAMIS system allowed for on-line monitoring of the deformation process of the considered joining elements. The particular distributions of displacement fields at the joint surface were estimated for any stage of loading process. Numerical modelling was performed for experimentally investigated specimens. The materials parameters, necessary for calculation, were estimated from experiments. FEA modelling was done with the help of ABAQUS code.

Cross-Calibrating Sunspot Magnetic Field Strength Measurements from the McMath-Pierce Solar Telescope and the Dunn Solar Telescope

Science.gov (United States)

Watson, Fraser T.; Beck, Christian; Penn, Matthew J.; Tritschler, Alexandra; Pillet, Valentín Martinez; Livingston, William C.

2015-11-01

In this article we describe a recent effort to cross-calibrate data from an infrared detector at the McMath-Pierce Solar Telescope and the Facility InfraRed Spectropolarimeter (FIRS) at the Dunn Solar Telescope. A synoptic observation program at the McMath-Pierce has measured umbral magnetic field strengths since 1998, and this data set has recently been compared with umbral magnetic field observations from SOHO/MDI and SDO/HMI. To further improve on the data from McMath-Pierce, we compared the data with measurements taken at the Dunn Solar Telescope with far greater spectral resolution than has been possible with space instrumentation. To minimise potential disruption to the study, concurrent umbral measurements were made so that the relationship between the two datasets can be most accurately characterised. We find that there is a strong agreement between the umbral magnetic field strengths recorded by each instrument, and we reduced the FIRS data in two different ways to successfully test this correlation further.

Study of Immobilization Procedure on Silver Nanolayers and Detection of Estrone with Diverged Beam Surface Plasmon Resonance (SPR Imaging

Directory of Open Access Journals (Sweden)

Ibrahim Abdulhalim

2013-03-01

Full Text Available An immobilization protocol was developed to attach receptors on smooth silver thin films. Dense and packed 11-mercaptoundecanoic acid (11-MUA was used to avoid uncontrolled sulfidization and harmful oxidation of silver nanolayers. N,N'-dicyclohexylcarbodiimide (DCC and N-hydroxysuccinimide (NHS were added to make the silver surfaces reactive. A comparative study was carried out with different immersion times of silver samples in 11-MUA solutions with different concentrations to find the optimum conditions for immobilization. The signals, during each step of the protocol, were analyzed with a refractometer based on the surface plasmon resonance (SPR effect and luminescence techniques. Molecular interactions at the surfaces between the probe and target at the surface nanolayer shift the SPR signal, thus indicating the presence of the substance. To demonstrate specific biosensing, rabbit anti-estrone polyclonal immunoglobulin G (IgG antibody was immobilized through a linker on 47 nm silver layer deposited on SF11 glass. At the final stage, the representative endocrine disruptor—estrone—was attached and detected in deionized water with a diverging beam SPR imaging sensor.

MANAGING NEWLY ESTABLISHED PESTS: Cooperative efforts contained spread of Pierce's disease and found genetic resistance

Directory of Open Access Journals (Sweden)

George Bruening

2014-10-01

Full Text Available An outbreak of Pierce's disease of grapevine in the Temecula Valley in the late 1990s was one in a decades-long series of sporadic appearances of this infection in California. However, the new outbreak was qualitatively different because of the rapidity with which it spread in the vineyard and its appearance almost simultaneously at distant locations. The causative agent of Pierce's disease is the bacterium Xylella fastidiosa, and the distinct characteristics of the Temecula Valley outbreak were traced to the establishment of a new insect vector in California, the glassy-winged sharpshooter. Intensive and collaborative efforts among government agencies, industry and research institutions over 15 years have successfully contained the disease, and given scientists time to discover promising long-term potential solutions through genetic resistance.

The incidence of complications associated with lip and/or tongue piercings: a systematic review

NARCIS (Netherlands)

Hennequin-Hoenderdos, N.L.; Slot, D.E.; Van der Weijden, G.A.

2016-01-01

Objective: This review determines the incidence of complications associated with lip and/or tongue piercings based on a systematic evaluation of the available literature. Material and Methods: MEDLINE–PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through June 2014 to

Piercing of the containment shell of a reactor building in case of airplane crash

International Nuclear Information System (INIS)

Herzog, M.

1978-01-01

The author presents a simple calculation model for a realistic check of the piercing safety of containments of reactor buildings in case of airplane crash. Its application is illustrated by a numerical example (Starfighter crash on the Unterweser nuclear power plant). (orig.) [de

Control of Pierce's Disease by Phage.

Directory of Open Access Journals (Sweden)

Mayukh Das

Full Text Available Pierce's Disease (PD of grapevines, caused by Xylella fastidiosa subsp. fastidiosa (Xf, is a limiting factor in the cultivation of grapevines in the US. There are presently no effective control methods to prevent or treat PD. The therapeutic and prophylactic efficacy of a phage cocktail composed of four virulent (lytic phages was evaluated for control of PD. Xf levels in grapevines were significantly reduced in therapeutically or prophylactically treated grapevines. PD symptoms ceased to progress one week post-therapeutic treatment and symptoms were not observed in prophylactically treated grapevines. Cocktail phage levels increased in grapevines in the presence of the host. No in planta phage-resistant Xf isolates were obtained. Moreover, Xf mutants selected for phage resistance in vitro did not cause PD symptoms. Our results indicate that phages have great potential for biocontrol of PD and other economically important diseases caused by Xylella.

Tattoos and Piercing: A Review for the Emergency Department Physician

Directory of Open Access Journals (Sweden)

William K. Mallon

2011-05-01

Full Text Available Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications. [West J Emerg Med. 2011;12(4:393–398.

Pierced Lasso Proteins

Science.gov (United States)

Jennings, Patricia

Entanglement and knots are naturally occurring, where, in the microscopic world, knots in DNA and homopolymers are well characterized. The most complex knots are observed in proteins which are harder to investigate, as proteins are heteropolymers composed of a combination of 20 different amino acids with different individual biophysical properties. As new-knotted topologies and new proteins containing knots continue to be discovered and characterized, the investigation of knots in proteins has gained intense interest. Thus far, the principle focus has been on the evolutionary origin of tying a knot, with questions of how a protein chain `self-ties' into a knot, what the mechanism(s) are that contribute to threading, and the biological relevance and functional implication of a knotted topology in vivo gaining the most insight. Efforts to study the fully untied and unfolded chain indicate that the knot is highly stable, remaining intact in the unfolded state orders of magnitude longer than first anticipated. The persistence of ``stable'' knots in the unfolded state, together with the challenge of defining an unfolded and untied chain from an unfolded and knotted chain, complicates the study of fully untied protein in vitro. Our discovery of a new class of knotted proteins, the Pierced Lassos (PL) loop topology, simplifies the knotting approach. While PLs are not easily recognizable by the naked eye, they have now been identified in many proteins in the PDB through the use of computation tools. PL topologies are diverse proteins found in all kingdoms of life, performing a large variety of biological responses such as cell signaling, immune responses, transporters and inhibitors (http://lassoprot.cent.uw.edu.pl/). Many of these PL topologies are secreted proteins, extracellular proteins, as well as, redox sensors, enzymes and metal and co-factor binding proteins; all of which provide a favorable environment for the formation of the disulphide bridge. In the PL

Improved piercing of microneedle arrays in dermatomed human skin by an impact insertion method

NARCIS (Netherlands)

Verbaan, F.J.; Bal, S.M.; Berg, van den D.J.; Dijksman, J.A.; Hecke, van M.; Verpoorten, H.; Berg, van den A.; Luttge, R.; Bouwstra, J.A.

2008-01-01

An electrical applicator was designed, which can pierce short microneedles into the skin with a predefined velocity. Three different shapes of microneedles were used, namely 300 µm assembled hollow metal microneedle arrays, 300 µm solid metal microneedle arrays and 245 µm hollow silicon microneedle

The prevalence of oral and peri-oral piercings in young adults: a systematic review

NARCIS (Netherlands)

Hennequin-Hoenderdos, N.L.; Slot, D.E.; van der Weijden, G.A.

2012-01-01

OBJECTIVE: To determine the prevalence of oral and/or peri-oral piercings in young adults based on a systematic review of the available literature. MATERIAL AND METHODS: The MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through April 2012 to identify appropriate

Nanoscale Affinity Chip Interface for Coupling Inhibition SPR Immunosensor Screening with Nano-LC TOF MS

NARCIS (Netherlands)

Marchesini, G.R.; Buijs, J.; Haasnoot, W.; Hooijerink, H.; Jansson, O.; Nielen, M.W.F.

2008-01-01

The on-line nanoscale coupling of a surface plasmon resonance (SPR)-based inhibition biosensor immunoassay (iBIA) for the screening of low molecular weight molecules with nano-liquid-chromatography electrospray ionization time-of-flight mass spectrometry (nano-LC ESI TOF MS) for identification is

A 120kV IGBT modulator for driving a Pierce electron gun

International Nuclear Information System (INIS)

Earley, Lawrence M.; Brown, Richard W.; Carlson, Randolph L.; Ferguson, Patrick; Haynes, William B.; Kirbie, Hugh C.; Russell, Steven J.; Sigler, Floyd E.; Smirnova, Evgenya I.; Wheat, Robert M. Jr.

2004-01-01

An IGBT modulator has been developed to drive a 120 kV, 23 A Pierce electron gun. The modulator is capable of producing pulses up to 10 μs in width at repetition rates up to 10Hz with no active reset. The pulse rise time on the electron gun will be approximately 2 μs and the remaining 8 μs of flattop is tuned to have a ripple of less than 1 percent rms. The modulator technology was developed from a previous 50 kV prototype. The modulator consists of six boards, each with one EUPEC IGBT that drives a single common step-up transformer wound on METGLAS 2605SC cores. The six transformer cores share a common bi-filar output secondary winding. The modulator uses a fiber optic trigger system and has a high voltage cable output with an epoxy receptacle on the oil end and a ceramic receptacle on the vacuum end. The 120 kV electron gun was manufactured by MDS Co. and will be used to generate sheet electron beams from the standard pencil beam produced by the Pierce electron gun.

Improved piercing of microneedle arrays in dermatomed human skin by an impact insertion method

NARCIS (Netherlands)

Verbaan, F.J.; Bal, S.M.; van den Berg, D.J.; Dijksman, J.A.; van Hecke, M.; Verpoorten, H.; van den Berg, Albert; Lüttge, Regina; Bouwstra, J.A.

2008-01-01

An electrical applicator was designed, which can pierce short microneedles into the skin with a predefined velocity. Three different shapes of microneedles were used, namely 300 mu m assembled hollow metal microneedle arrays, 300 mu m solid metal microneedle arrays and 245 mu m hollow silicon

10 CFR 1049.8 - Training of SPR Protective Force Officers and qualification to carry firearms.

Science.gov (United States)

2010-01-01

... sufficient to maintain at least the minimum level of competency required for the successful performance of... competence to perform tasks associated with their responsibilities. The basic course shall include the...) Operating in such a manner as to preserve SPR sites and facilities; (9) Communications, including methods...

Historical Cavern Floor Rise for All SPR Sites

Energy Technology Data Exchange (ETDEWEB)

Moriarty, Dylan Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-09-01

The Strategic Petroleum Reserve (SPR) contains the largest supply is the largest stockpile of government-owned emergency crude oil in the world. The oil is stored in multiple salt caverns spread over four sites in Louisiana and Texas. Cavern infrastructure near the bottom of the cavern can be damaged from vertical floor movement. This report presents a comprehensive history of floor movements in each cavern. Most of the cavern floor rise rates ranged from 0.5-3.5 ft/yr, however, there were several caverns with much higher rise rates. BH103, BM106, and BH105 had the three highest rise rates. Information from this report will be used to better predict future vertical floor movements and optimally place cavern infrastructure. The reasons for floor rise are not entirely understood and should be investigated.

Comparison between a Direct-Flow SPR Immunosensor for Ampicillin and a Competitive Conventional Amperometric Device: Analytical Features and Possible Applications to Real Samples

Science.gov (United States)

Tomassetti, Mauro; Merola, Giovanni; Martini, Elisabetta; Campanella, Luigi; Sanzò, Gabriella; Favero, Gabriele; Mazzei, Franco

2017-01-01

In this research, we developed a direct-flow surface plasmon resonance (SPR) immunosensor for ampicillin to perform direct, simple, and fast measurements of this important antibiotic. In order to better evaluate the performance, it was compared with a conventional amperometric immunosensor, working with a competitive format with the aim of finding out experimental real advantages and disadvantages of two respective methods. Results showed that certain analytical features of the new SPR immunodevice, such as the lower limit of detection (LOD) value and the width of the linear range, are poorer than those of a conventional amperometric immunosensor, which adversely affects the application to samples such as natural waters. On the other hand, the SPR immunosensor was more selective to ampicillin, and measurements were more easily and quickly attained compared to those performed with the conventional competitive immunosensor. PMID:28394296

A triad of evidence for care of women with genital piercings.

Science.gov (United States)

Young, Cathy; Armstrong, Myrna L; Roberts, Alden E; Mello, Inola; Angel, Elayne

2010-02-01

To add three further dimensions of evidence for the care of women with genital piercings (GPs). Following a literature review, a cross-sectional study replicated previous work, using a web-based survey. This triad of evidence provides (a) descriptive quantitative data (N = 240) about women with GPs, (b) qualitative data about women with GPs, as well as (c) clinical observations from 60 healthcare providers (HCPs) who have cared for women with GPs. Three important findings about women with GPs were validated: (a) GPs were deliberate actions, sought for personal and sexual expression; (b) women with GPs treat piercings as a normal, meaningful part of their lives which produce sexual enhancement and expression; and (c) they continue to seek information about GP care from nonhealth providers. New data indicate that they have experienced depression (47%), abuse (physical 18%; emotional, 27%; sexual, 14%), and forced sexual activity (35%) in their lives. Several unsubstantiated assumptions about women with GPs are challenged with these data. GPs should not delay important health care. Health-protective, as well as health promotion, behaviors are important to reduce risks. Nurse practitioners (NPs) can become effective and resourceful advocates in three specific areas of care: (a) responsiveness to women with GPs, (b) collaborative decision making for the removal of jewelry, and (c) promotion of applicable patient education.

Piercing the sovereign ceiling: Issues in oil and gas project financing

International Nuclear Information System (INIS)

Coleman, T.S.

1998-01-01

In the oil and gas sector, corporations and governments face huge capital spending requirements in order to transform large resource discoveries into producing, cash-generating assets. A significant portion of this funding is expected to be done on a project finance basis, where bank lenders or bond investors take a secured position in financing a discrete project, with the expectation of being paid back by the cash flows from that project after completion. This trend is increasing demand for crediting rating services to provide credit ratings for these project financings. A key challenge is to analyze and rate credit-worthy projects in countries that have relatively low foreign currency sovereign ceilings due to economic, political, and financial risks. In most cases, the credit ratings for projects financed in currencies outside the host country are capped at the country''s foreign currency ceiling. However, in a few instances, mainly in the oil and gas sector, Moody''s has pierced the foreign currency ceiling or rated certain projects above the sovereign ratings of the countries where they are domiciled. The purpose of this article is to briefly explain some of the qualitative factors and considerations that have allowed Moody''s to pierce the ceiling in the oil and gas sector, with a focus on two recent and noteworthy projects: Ras Laffan Liquefied Natural Gas in Qatar and Petrozuata in Venezuela

Computed vs. conventional radiography for detecting fatigue cracks in riveted lap joints of aeronautical grade hybrid fiber-metal laminate Glare

International Nuclear Information System (INIS)

Tarpani, J.R.; Hideki Shinohara, A.; Da Silva, R.R.; Do Val Lacerda, N.

2007-01-01

This study aimed at assessing the capability of three different radiographic approaches (two computed or digital, and one conventional or analogous) for imaging fatigue cracks in riveted lap joints of composite fiber-metal laminate Glare. These structural joints are unique in the sense that fatigue cracks develop mainly at the faying surfaces of Glare sheets, so that visual detection is largely prevented and nondestructive inspection becomes mandatory. For this purpose, a round-robin programme comprising several industrial and research centers that employ X-ray radiography routinely to inspect high-demanding equipments, components and structures was conducted. (authors)

Immobilization of flavan-3-ols onto sensor chips to study their interactions with proteins and pectins by SPR

Energy Technology Data Exchange (ETDEWEB)

Watrelot, Aude A., E-mail: aude.watrelot@avignon.inra.fr [INRA, UMR408 Sécurité et Qualité des Produits d’Origine Végétale, Domaine St Paul, Site Agroparc, 84914 Avignon (France); Université d’Avignon, UMR408 Sécurité et Qualité des Produits d' Origine Végétale, F-84000 Avignon (France); Tran, Dong Tien [Université de Bordeaux, Institut des Sciences Moléculaires (UMR-CNRS 5255), 351 cours de la Libération, 33405 Talence (France); Institut Européen de Chimie et Biologie (IECB), 2 rue Robert Escarpit, 33607 Pessac (France); Buffeteau, Thierry [Université de Bordeaux, Institut des Sciences Moléculaires (UMR-CNRS 5255), 351 cours de la Libération, 33405 Talence (France); Deffieux, Denis [Université de Bordeaux, Institut des Sciences Moléculaires (UMR-CNRS 5255), 351 cours de la Libération, 33405 Talence (France); Institut Européen de Chimie et Biologie (IECB), 2 rue Robert Escarpit, 33607 Pessac (France); and others

2016-05-15

Highlights: • Flavanol-macromolecule interactions were determined using SPR. • Flavanols were chemically modified with a linker bearing a thiol group. • Flavanols were immobilized onto a carboxymethyl dextran surface. • Citrus pectin interacted more with flavanols than apple pectin. • Epicatechin interacted more with BSA than flavanol oligomer. - Abstract: Interactions between plant polyphenols and biomacromolecules such as proteins and pectins have been studied by several methods in solution (e.g. isothermal titration calorimetry, dynamic light scattering, nuclear magnetic resonance and spectrophotometry). Herein, these interactions were investigated in real time by Surface Plasmon Resonance (SPR) analysis after immobilization of flavan-3-ols onto a sensor chip surface. (−)-epicatechin, (+)-catechin and flavan-3-ol oligomers with an average degree of polymerization of 2 and 8 were chemically modified using N-(2-(tritylthio)ethyl)propiolamide in order to introduce a spacer unit onto the catecholic B ring. Modified flavan-3-ols were then immobilized onto a carboxymethylated dextran surface (CM5). Immobilization was validated and further verified by evaluating flavan-3-ol interaction with bovine serum albumin (BSA), poly-L-proline or commercial pectins. BSA was found to have a stronger association with monomeric flavan-3-ols than oligomers. SPR analysis of selected flavan-3-ols immobilized onto CM5 sensor chips showed a stronger association for citrus pectins than apple pectins, regardless of flavan-3-ol degree of polymerization.

Immobilization of flavan-3-ols onto sensor chips to study their interactions with proteins and pectins by SPR

International Nuclear Information System (INIS)

Watrelot, Aude A.; Tran, Dong Tien; Buffeteau, Thierry; Deffieux, Denis

2016-01-01

Highlights: • Flavanol-macromolecule interactions were determined using SPR. • Flavanols were chemically modified with a linker bearing a thiol group. • Flavanols were immobilized onto a carboxymethyl dextran surface. • Citrus pectin interacted more with flavanols than apple pectin. • Epicatechin interacted more with BSA than flavanol oligomer. - Abstract: Interactions between plant polyphenols and biomacromolecules such as proteins and pectins have been studied by several methods in solution (e.g. isothermal titration calorimetry, dynamic light scattering, nuclear magnetic resonance and spectrophotometry). Herein, these interactions were investigated in real time by Surface Plasmon Resonance (SPR) analysis after immobilization of flavan-3-ols onto a sensor chip surface. (−)-epicatechin, (+)-catechin and flavan-3-ol oligomers with an average degree of polymerization of 2 and 8 were chemically modified using N-(2-(tritylthio)ethyl)propiolamide in order to introduce a spacer unit onto the catecholic B ring. Modified flavan-3-ols were then immobilized onto a carboxymethylated dextran surface (CM5). Immobilization was validated and further verified by evaluating flavan-3-ol interaction with bovine serum albumin (BSA), poly-L-proline or commercial pectins. BSA was found to have a stronger association with monomeric flavan-3-ols than oligomers. SPR analysis of selected flavan-3-ols immobilized onto CM5 sensor chips showed a stronger association for citrus pectins than apple pectins, regardless of flavan-3-ol degree of polymerization.

An Advanced Semimetal-Organic Bi Spheres-g-C3N4 Nanohybrid with SPR-Enhanced Visible-Light Photocatalytic Performance for NO Purification.

Science.gov (United States)

Dong, Fan; Zhao, Zaiwang; Sun, Yanjuan; Zhang, Yuxin; Yan, Shuai; Wu, Zhongbiao

2015-10-20

To achieve efficient photocatalytic air purification, we constructed an advanced semimetal-organic Bi spheres-g-C3N4 nanohybrid through the in-situ growth of Bi nanospheres on g-C3N4 nanosheets. This Bi-g-C3N4 compound exhibited an exceptionally high and stable visible-light photocatalytic performance for NO removal due to the surface plasmon resonance (SPR) endowed by Bi metal. The SPR property of Bi could conspicuously enhance the visible-light harvesting and the charge separation. The electromagnetic field distribution of Bi spheres involving SPR effect was simulated and reaches its maximum in close proximity to the Bi particle surface. When the Bi metal content was controlled at 25%, the corresponding Bi-g-C3N4 displayed outstanding photocatalytic capability and transcended those of other visible-light photocatalysts. The Bi-g-C3N4 exhibited a high structural stability under repeated photocatalytic runs. A new visible-light-induced SPR-based photocatalysis mechanism with Bi-g-C3N4 was proposed on the basis of the DMPO-ESR spin-trapping. The photoinduced electrons could transfer from g-C3N4 to the Bi metal, as revealed with time-resolved fluorescence spectra. The function of Bi semimetal as a plasmonic cocatalyst for boosting visible light photocatalysis was similar to that of noble metals, which demonstrated a great potential of utilizing the economically feasible Bi element as a substitute for noble metals for the advancement of photocatalysis efficiency.

Development of a β-Lactoglobulin Sensor Based on SPR for Milk Allergens Detection

Directory of Open Access Journals (Sweden)

Jon Ashley

2018-03-01

Full Text Available A sensitive and label-free surface plasmon resonance (SPR based sensor was developed in this work for the detection of milk allergens. β-lactoglobulin (BLG protein was used as the biomarker for cow milk detection. This is to be used directly in final rinse samples of cleaning in-place (CIP systems of food manufacturers. The affinity assay was optimised and characterised before a standard curve was performed in pure buffer conditions, giving a detection limit of 0.164 µg mL−1 as a direct binding assay. The detection limit can be further enhanced through the use of a sandwich assay and amplification with nanomaterials. However, this was not required here, as the detection limit achieved exceeded the required allergen detection levels of 2 µg mL−1 for β-lactoglobulin. The binding affinities of the polyclonal antibody for BLG, expressed by the dissociation constant (KD, were equal to 2.59 × 10−9 M. The developed SPR-based sensor offers several advantages in terms of label-free detection, real-time measurements, potential on-line system and superior sensitivity when compared to ELISA-based techniques. The method is novel for this application and could be applied to wider food allergen risk management decision(s in food manufacturing.

Grating-Coupled Surface Plasmon Resonance (GC-SPR) Optimization for Phase-Interrogation Biosensing in a Microfluidic Chamber.

Science.gov (United States)

Rossi, Stefano; Gazzola, Enrico; Capaldo, Pietro; Borile, Giulia; Romanato, Filippo

2018-05-18

Surface Plasmon Resonance (SPR)-based sensors have the advantage of being label-free, enzyme-free and real-time. However, their spreading in multidisciplinary research is still mostly limited to prism-coupled devices. Plasmonic gratings, combined with a simple and cost-effective instrumentation, have been poorly developed compared to prism-coupled system mainly due to their lower sensitivity. Here we describe the optimization and signal enhancement of a sensing platform based on phase-interrogation method, which entails the exploitation of a nanostructured sensor. This technique is particularly suitable for integration of the plasmonic sensor in a lab-on-a-chip platform and can be used in a microfluidic chamber to ease the sensing procedures and limit the injected volume. The careful optimization of most suitable experimental parameters by numerical simulations leads to a 30⁻50% enhancement of SPR response, opening new possibilities for applications in the biomedical research field while maintaining the ease and versatility of the configuration.

Tatuajes y piercing: consideraciones sobre el alcance de una ordenanza municipal en la ciudad de Córdoba Tattoos and piercing: considerations about the scope of a municipal statue in Cordoba city

Directory of Open Access Journals (Sweden)

J M Verduzco

2008-09-01

Full Text Available Las ordenanzas municipales son herramientas legales, a través de las cuales los municipios o comunas ejercen un control sobre diversas actividades, algunas de las cuales como el caso de la práctica de tatuajes y piercing, pueden ser nocivas para la salud. La Municipalidad de Córdoba a través de la Ordenanza Nº 10962, sancionada el 6 de Octubre de 2005, intenta controlar esta ancestral práctica realizada sobre la piel humana. El presente trabajo tiene como finalidad analizar el articulado de esta Ordenanza y hacer algunas consideraciones sobre su utilidad en la prevención de enfermedades.Municipal statues are legal tools ratified by the municipal legislative power, stablishing rules in the corresponding scope. This rules have the aim of regulating different activities, over which the Municipality police power is excercised. Many of this activities are related to public health, because they can cause diseases in the population exposed to them. The practice of tattoing and piercing is one of this activities able to cause diseases. Due to this fact, the Municipality of Córdoba has sanctioned statue 10962 in order to control this ancestral practice.

Development of low cost and accurate homemade sensor system based on Surface Plasmon Resonance (SPR)

Science.gov (United States)

Laksono, F. D.; Supardianningsih; Arifin, M.; Abraha, K.

2018-04-01

In this paper, we developed homemade and computerized sensor system based on Surface Plasmon Resonance (SPR). The developed systems consist of mechanical system instrument, laser power sensor, and user interface. The mechanical system development that uses anti-backlash gear design was successfully able to enhance the angular resolution angle of incidence laser up to 0.01°. In this system, the laser detector acquisition system and stepper motor controller utilizing Arduino Uno which is easy to program, flexible, and low cost, was used. Furthermore, we employed LabView’s user interface as the virtual instrument for facilitating the sample measurement and for transforming the data recording directly into the digital form. The test results using gold-deposited half-cylinder prism showed the Total Internal Reflection (TIR) angle of 41,34°± 0,01° and SPR angle of 44,20°± 0,01°, respectively. The result demonstrated that the developed system managed to reduce the measurement duration and data recording errors caused by human error. Also, the test results also concluded that the system’s measurement is repeatable and accurate.

Grating coupled SPR microarray analysis of proteins and cells in blood from mice with breast cancer.

Science.gov (United States)

Mendoza, A; Torrisi, D M; Sell, S; Cady, N C; Lawrence, D A

2016-01-21

Biomarker discovery for early disease diagnosis is highly important. Of late, much effort has been made to analyze complex biological fluids in an effort to develop new markers specific for different cancer types. Recent advancements in label-free technologies such as surface plasmon resonance (SPR)-based biosensors have shown promise as a diagnostic tool since there is no need for labeling or separation of cells. Furthermore, SPR can provide rapid, real-time detection of antigens from biological samples since SPR is highly sensitive to changes in surface-associated molecular and cellular interactions. Herein, we report a lab-on-a-chip microarray biosensor that utilizes grating-coupled surface plasmon resonance (GCSPR) and grating-coupled surface plasmon coupled fluorescence (GCSPCF) imaging to detect circulating tumor cells (CTCs) from a mouse model (FVB-MMTV-PyVT). GCSPR and GCSPCF analysis was accomplished by spotting antibodies to surface cell markers, cytokines and stress proteins on a nanofabricated GCSPR microchip and screening blood samples from FVB control mice or FVB-MMTV-PyVT mice with developing mammary carcinomas. A transgenic MMTV-PyVT mouse derived cancer cell line was also analyzed. The analyses indicated that CD24, CD44, CD326, CD133 and CD49b were expressed in both cell lines and in blood from MMTV-PyVT mice. Furthermore, cytokines such as IL-6, IL-10 and TNF-α, along with heat shock proteins HSP60, HSP27, HSc70(HSP73), HSP90 total, HSP70/HSc70, HSP90, HSP70, HSP90 alpha, phosphotyrosine and HSF-1 were overexpressed in MMTV-PyVT mice.

Multiplexed imaging surface plasmon resonance (iSPR) biosensor assay for the detection of Fusarium toxins in wheat

Science.gov (United States)

Certain Fusarium species (F. graminearum and F. verticilloides in particular) infest grains and can produce a wide range of fungal (myco)-toxins, causing huge economic losses worldwide. A reproducible and sensitive imaging surface plasmon resonance (iSPR) assay was developed and validated for three ...

Target immobilization as a strategy for NMR-based fragment screening: comparison of TINS, STD, and SPR for fragment hit identification.

Science.gov (United States)

Kobayashi, Masakazu; Retra, Kim; Figaroa, Francis; Hollander, Johan G; Ab, Eiso; Heetebrij, Robert J; Irth, Hubertus; Siegal, Gregg

2010-09-01

Fragment-based drug discovery (FBDD) has become a widely accepted tool that is complementary to high-throughput screening (HTS) in developing small-molecule inhibitors of pharmaceutical targets. Because a fragment campaign can only be as successful as the hit matter found, it is critical that the first stage of the process be optimized. Here the authors compare the 3 most commonly used methods for hit discovery in FBDD: high concentration screening (HCS), solution ligand-observed nuclear magnetic resonance (NMR), and surface plasmon resonance (SPR). They selected the commonly used saturation transfer difference (STD) NMR spectroscopy and the proprietary target immobilized NMR screening (TINS) as representative of the array of possible NMR methods. Using a target typical of FBDD campaigns, the authors find that HCS and TINS are the most sensitive to weak interactions. They also find a good correlation between TINS and STD for tighter binding ligands, but the ability of STD to detect ligands with affinity weaker than 1 mM K(D) is limited. Similarly, they find that SPR detection is most suited to ligands that bind with K(D) better than 1 mM. However, the good correlation between SPR and potency in a bioassay makes this a good method for hit validation and characterization studies.

Biologia floral e visitantes de Gaylussacia brasiliensis (Spr. Meissner (Ericaceae - uma espécie com anteras poricidas polinizada por beija-flores Floral biology and visitors of Gaylussacia brasiliensis (Spr. Meissner (Ericaceae - a poricidal anther species pollinated by hummingbirds

Directory of Open Access Journals (Sweden)

Francielle Paulina de Araújo

2011-06-01

Full Text Available A biologia floral de Gaylussacia brasiliensis (Spr. Meissner (Ericaceae foi estudada na borda de uma mata de galeria na reserva ecológica do Clube de Caça e Pesca Itororó de Uberlândia, Minas Gerais. G. brasiliensis é um arbusto que pode alcançar de 0,3 a 3,0 m de altura e ocorre de forma isolada ou agregada. Apresenta floração contínua e possui inflorescências racemosas, axilares com flores pendentes. As flores são hermafroditas, vermelhas, de corola urceolada, apresentam antese diurna e ausência odor. O néctar apresentou volume de cerca de 3,0 μL e concentração de açúcares por volta de 13%. G. brasiliensis é autocompatível, não apresenta autopolinização espontânea e nem apomixia. Os polinizadores foram os beijaflores: Chlorostlibon lucidus (Shaw, Amazilia fimbirata (Gmelin, Hylocharis chrysura (Shaw (Throchilinae e Phaethornis pretrei (Lesson & DeLattre (Phaethornithinae. G. brasiliensis apresenta anteras poricidas com poros amplos e os beija-flores, quando adejam com o bico inserido nas flores em busca de néctar, fornecem a vibração necessária para a liberação dos grãos de pólen. Apesar de apresentar volume e concentração de açúcar no néctar relativamente pequenos, os agrupamentos de indivíduos com muitas flores parecem atrair beija-flores com comportamento territorial.The floral biology of Gaylussacia brasiliensis (Spr. Meissner (Ericaceae was studied on swampy edges of a gallery forest in Uberlandia, Minas Gerais. Gaylussacia brasiliensis is a shrub 0.3 to 3.0 m tall that occurs isolated or aggregated and has continuous flowering. The axillary racemose inflorescences produce four to dozens of pendulous flowers. The flowers are hermaphroditic, red, urceolate, odorless and have diurnal anthesis. Concentration of sugars in nectar was c. 13% and volume c. 3.0 μL. G. brasiliensis is a self-compatible, non apomictic species, which does not present spontaneous self-pollination. The pollinators of G

The corrosion resistance of materials used for the manufacture of ear piercing studs

International Nuclear Information System (INIS)

Correa, O. V.; Saiki, M.; Rogero, S. O.; Costa, I.

2003-01-01

Nickel containing alloy shave been widely used as substrates for the manufacture of studs used for ear piercing. Unfortunately, nickel has also been related to the development of allergic contact dermatitis caused by skin sensitization due to Ni''2+ ions. Nickel ions can be leached out into the body fluids due to corrosion reactions. Defect free coatings are very difficult to produce, and therefore nickel free materials should be used as substrates of ear piercing studs, although the commercial alloys used usually contain this element. In this study, the corrosion resistance of two kinds of commercial studs prepared with nickel containing substrates and a titanium laboratory made stud was determined in a culture medium. The corrosion resistance of the studs was investigated by means of potentiodynamic polarization tests and electrochemical impedance spectroscopy as a function of immersion time in the culture medium. The elements that leached out into the medium due to corrosion reactions were analyzed by instrumental neutron activation analysis. The surfaces of the commercial gold-coated studs were examined by scanning electron microscopy and analyzed by energy dispersive spectroscopy, both before and after exposure to the culture medium. The cytotoxicity of the tested studs was also determined in the culture medium. (Author) 10 refs

Aerial Survey of Vessel Usage and Marine Animal Occurrence between Ft. Pierce and Key West Florida, 1992-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — An aerial survey between Ft Pierce and Key West Florida was performed aboard US Coast Guard helicopters and fixed wing aircraft from September 1992 through March...

Cloning, expression and structural stability of a cold-adapted ß-Galactosidase from Rahnella sp.R3

Science.gov (United States)

A novel gene was isolated for the first time from a psychrophilic gram-negative bacterium Rahnella sp.R3. It encoded a cold-adapted ß-galactosidase (R-ß-Gal). Recombinant R-ß-Gal was expressed in Escherichia coli BL21 (DE3), purified, and characterized. R-ß-Gal belongs to the glycosyl hydrolase fami...

SFG and SPR Study of Sodium Dodecyl Sulfate Film Assembly on Positively Charged Surfaces

Science.gov (United States)

Song, Sanghun; Weidner, Tobias; Wagner, Matthew; Castner, David

2012-02-01

This study uses sum frequency generation (SFG) vibrational spectroscopy and surface plasmon resonance (SPR) sensing to investigate the structure of sodium dodecyl sulfate (SDS) films formed on positively charged and hydrophilic surfaces. The SPR signals show a good surface coverage suggesting that full monolayer coverage is reached at 1 mM. SFG spectra of SDS adsorbed exhibits well resolved CH3 peaks and OH peaks. At both 0.2 mM and 1 mM SDS concentration the intensity of both the CH3 and OH peaks decreased close to background levels. We found that the loss of SFG signal at 0.2 mM occurs at this concentration independent of surface charge density. It is more likely that the loss of signal is related to structural inhomogeneity induced by a striped phase - stand-up phase transition. This is supported by a distinct change of the relative SFG phase between CH3/OH near 0.2 mM. The second intensity minimum might be related to charge compensation effects. We observed a substrate dependence for the high concentration transition. We also observed distinct SFG signal phase changes for water molecules associated with SDS layers at different SDS solution concentrations indicating that the orientation of bound water changed with SDS surface structure.

[Are nail polish, artificial nails and piercings allowed outside the surgical area?Recommendations for the perioperative policy

NARCIS (Netherlands)

Bucx, M.J.L.; Krijtenburg, P.; Scheffer, G.J.

2017-01-01

- An increasing number of patients wear nail polish, artificial nails or have piercings.- There is uncertainty about the perioperative management of these items, especially when located outside the surgical area.- In the majority of hospitals, patients are urged to remove these items preoperatively,

Gold nanoparticles decorated on BaTiO3 as photocatalyst: effect of SPR and ferroelectricity

Science.gov (United States)

Miao, Zhilei; Chen, Lei; Wang, Rui; Yuan, Rongchun; Zhou, Fang; Lv, Pengfei; Zhang, Xiuyun; Wang, Qiang

2018-02-01

BaTiO3(BTO) powders with cubic(C) and tetragonal(T) crystalline structures were prepared by sol-gel method followed by calcination at different temperatures, and they were decorated with gold nanoparticles(AuNPs) to form Au-T-BTO and Au-C-BTO respectively. All the samples (C-BTO, T-BTO, Au-C-BTO and Au-T-BTO) were used as photo-catalysts for the degradation of Rhodamine B (RhB). Au-T-BTO exhibits the highest photocatalytic activity due to thecombined effect of surface plasmon resonance (SPR) and the ferroelectricity of the tetragonalphase BTO. The light absorption peaks at 500 to 600 nm verify the presence of SPR effect from Au NPs. Based on density functional theory (DFC) within the generalized gradient approximation (GGA) approach, it was demonstrated that the tetragonal phase BaTiO3 shows a spontaneous polarization with the calculated value of 0.34 C m-2, which is absent in thecubic phase. The internal space charge layer in tetragonal phase BTO enhances the separation of photoexcited carriers due to the spontaneous ferroelectric polarization, which also benefits photocatalytic activities.

[Are nail polish, artificial nails and piercings allowed outside the surgical area?Recommendations for the perioperative policy].

Science.gov (United States)

Bucx, M J L; Krijtenburg, P; Scheffer, G J

2017-01-01

- An increasing number of patients wear nail polish, artificial nails or have piercings.- There is uncertainty about the perioperative management of these items, especially when located outside the surgical area.- In the majority of hospitals, patients are urged to remove these items preoperatively, under the assumption that they might cause problems.- Frequently, however, these items cannot be removed straightforwardly.- Nail polish and artificial nails only very rarely cause perioperative problems and therefore do not need to be removed pre-operatively.- The same applies to most piercings, except when located in or near the respiratory tract, if they have sharp endings or if they might cause problems as a result of the perioperative positioning of the patient.- Providing adequate information to the patient, knowledge about removal of these items and documentation of agreed arrangements are all important.- A national guideline concerning perioperative policy is urgently required.

Synthesis of surface plasmon resonance (SPR) triggered Ag/TiO2 photocatalyst for degradation of endocrine disturbing compounds

International Nuclear Information System (INIS)

Leong, Kah Hon; Gan, Bee Ling; Ibrahim, Shaliza; Saravanan, Pichiah

2014-01-01

Graphical abstract: - Highlights: • Ag/TiO 2 was synthesized with aid of natural photon stimulated photoreduction. • Deposited Ag prompted well the LSPRs, Schottky barrier for visible light utilization. • Photocatalytic activity was evaluated by degrading EDCs under visible light. • 3.0 wt% Ag/TiO 2 resulted with good photocatalytic efficiency over others. - Abstract: Surface deposition of silver nanoparticles (Ag NPs) onto the 100% anatase titania (Ag/TiO 2 ) for evolution of surface plasmon resonance (SPR) was achieved sustainably with the assistance of solar energy. The preparation resulted in Ag/TiO 2 photocatalyst with varied Ag depositions (0.5 wt%, 1.0 wt%, 3.0 wt% and 5.0 wt%). All obtained photocatalysts were characterized for the evolution of SPR via crystalline phase analysis, morphology, lattice fringes, surface area and pore size characteristics, chemical composition with chemical and electronic state, Raman scattering, optical and photoluminescence properties. The deposition of synthesized Ag NPs exhibited high uniformity and homogeneity and laid pathway for effective utilization of the visible region of electromagnetic spectrum through SPR. The depositions also lead for suppressing recombination rates of electron–hole. The photocatalytic evaluation was carried out by adopting two different class of endocrine disturbing compound (EDC) i.e., amoxicillin (pharmaceutical) and 2,4-dichlorophenol (pesticide) excited with artificial visible light source. Ag/TiO 2 with Ag > 0.5 wt% exhibited significant degradation efficiency for both amoxicillin and 2,4-dichlorophenol. Thus synthesized Ag/TiO 2 revealed the implication of plasmonics on TiO 2 for the enhanced visible light photocatalytic activity

Antibody-Hapten Recognition at the Surface of Functionalized Liposomes Studied by SPR: Steric Hindrance of Pegylated Phospholipids in Stealth Liposomes Prepared for Targeted Radionuclide Delivery

Directory of Open Access Journals (Sweden)

Eliot. P. Botosoa

2011-01-01

Full Text Available Targeted PEGylated liposomes could increase the amount of drugs or radionuclides delivered to tumor cells. They show favorable stability and pharmacokinetics, but steric hindrance of the PEG chains can block the binding of the targeting moiety. Here, specific interactions between an antihapten antibody (clone 734, specific for the DTPA-indium complex and DTPA-indium-tagged liposomes were characterized by surface plasmon resonance (SPR. Non-PEGylated liposomes fused on CM5 chips whereas PEGylated liposomes did not. By contrast, both PEGylated and non-PEGylated liposomes attached to L1 chips without fusion. SPR binding kinetics showed that, in the absence of PEG, the antibody binds the hapten at the surface of lipid bilayers with the affinity of the soluble hapten. The incorporation of PEGylated lipids hinders antibody binding to extents depending on PEGylated lipid fraction and PEG molecular weight. SPR on immobilized liposomes thus appears as a useful technique to optimize formulations of liposomes for targeted therapy.

Lamb wave-based damage quantification and probability of detection modeling for fatigue life assessment of riveted lap joint

Science.gov (United States)

He, Jingjing; Wang, Dengjiang; Zhang, Weifang

2015-03-01

This study presents an experimental and modeling study for damage detection and quantification in riveted lap joints. Embedded lead zirconate titanate piezoelectric (PZT) ceramic wafer-type sensors are employed to perform in-situ non-destructive testing during fatigue cyclical loading. A multi-feature integration method is developed to quantify the crack size using signal features of correlation coefficient, amplitude change, and phase change. In addition, probability of detection (POD) model is constructed to quantify the reliability of the developed sizing method. Using the developed crack size quantification method and the resulting POD curve, probabilistic fatigue life prediction can be performed to provide comprehensive information for decision-making. The effectiveness of the overall methodology is demonstrated and validated using several aircraft lap joint specimens from different manufactures and under different loading conditions.

When Paradigms Clash: Comments on Cameron and Pierce's Claim That Rewards Do Not Undermine Intrinsic Motivation.

Science.gov (United States)

Ryan, Richard M.; Deci, Edward L.

1996-01-01

The conclusion of J. Cameron and W. D. Pierce that rewards do not pose a threat to intrinsic motivation (1994) is a misrepresentation of the literature based on a flawed meta-analysis. Their analysis is more an attempt to defend behaviorist turf rather than meaningful consideration of relevant data and issues. (Author/SLD)

Appearance and culture: oral pathology associated with certain "fashions" (tattoos, piercings, etc.).

Science.gov (United States)

Chimenos-Küstner, Eduardo; Batlle-Travé, Inés; Velásquez-Rengijo, Sandra; García-Carabaño, Tauca; Viñals-Iglesias, Helena; Roselló-Llabrés, Xavier

2003-01-01

Humans are characterized by a compulsive tendency to distinguish themselves from the rest: differences in clothes, hairstyle or "decorative" details are used to this effect, based on highly diverse criteria. Such differentiating practices may be aimed at identification with a certain ideological group, for example, or with a concrete "fashion", and involve the use of jewelry, clothes, unusual attire, hairstyles, mutilations, etc. In this context, the present review addresses certain aspects of mutilation practices from both the general and specifically dental perspectives. Mutations imply permanent or lasting sectioning or lesions of a part of the body, and comprise skeletal deforming, dental mutilations, circumcision, ablation of the clitoris, scarification, tattoos, and perforations (particularly of the soft tissues). In this sense, tattoos and perforations or piercings are popular -- particularly among adolescents. This trend may be interpreted as a form of communication, identity expression, or as a type of body cult (i.e., so-called "body art"). Such mutilating practices reflect different motivations including fashion, rebelliousness, differentiation, sexual motives, the remembering of events, physical sensations, and ethnic or tribal influences. However, these practices can cause complications such as infections, laceration and soft and hard tissue damage, hypersensitivity reactions and other alterations of variable severity. Under these premises, questions are raised concerning the competence of those who perform these mutilations, the preventive measures adopted, and the legal conditions under which tattoos and piercings are made in our society.

Systematic study of a simple formation of pierce-electron-gun

International Nuclear Information System (INIS)

Saad, Hussein Mahmoud; Abd Elhamed, H.

1985-01-01

In this work the design and construction of a simple form of Pierce Gun are discussed. As the vacuum system used in the experiment was frequently exposed to open air, a solenoid filamentary-cathode was used. Hence, an effective magnetic field has been induced as the filament was heated, whereupon the electrons altered their paths. We, therefore investigated the change in beam intensity as influenced by the focusing electrode material, anode position, and extraction hole width. The focusing electrode effect was examined by comparing the measured emission current density with the corresponding calculated value. The studies showed that electrons follow a saddle-like shape in the gun inter-space. It was modified by the stainless steel focusing electrode

Piercing to the Pith of the Body: The Evolution of Body Mandala and Tantric Corporeality in Tibet

Directory of Open Access Journals (Sweden)

Rae Erin Dachille

2017-09-01

Full Text Available Buddhist tantric practitioners embrace the liminal status of the human body to manifest divine identity. In piercing to the pith of human embodiment, the tantric practitioner reconfigures the shape and contours of his/her reality. This article investigates the evolution of one particular technique for piercing to the pith of the body on Tibetan soil, a ritual practice known as body mandala [lus dkyil Skt. deha-maṇḍala]. In particular, it uncovers a significant shift of emphasis in the application of the Guhyasamāja body mandala practice initiated by champions of the emerging Gandenpa [Dga’ ldan pa] or Gelukpa [Dge lugs pa] tradition of Tibetan Buddhism, Tsongkhapa (1357–1419 and Mkhas grub rje (1385–1438. This article reveals some of the radical implications of ritual exegesis, ranging from the socioreligious aspects of securing prestige for a tradition to the ultimate soteriological goals of modifying the boundaries between life and death and ordinary and enlightened embodiment.

Dynamic SPR monitoring of yeast nuclear protein binding to a cis-regulatory element

International Nuclear Information System (INIS)

Mao, Grace; Brody, James P.

2007-01-01

Gene expression is controlled by protein complexes binding to short specific sequences of DNA, called cis-regulatory elements. Expression of most eukaryotic genes is controlled by dozens of these elements. Comprehensive identification and monitoring of these elements is a major goal of genomics. In pursuit of this goal, we are developing a surface plasmon resonance (SPR) based assay to identify and monitor cis-regulatory elements. To test whether we could reliably monitor protein binding to a regulatory element, we immobilized a 16 bp region of Saccharomyces cerevisiae chromosome 5 onto a gold surface. This 16 bp region of DNA is known to bind several proteins and thought to control expression of the gene RNR1, which varies through the cell cycle. We synchronized yeast cell cultures, and then sampled these cultures at a regular interval. These samples were processed to purify nuclear lysate, which was then exposed to the sensor. We found that nuclear protein binds this particular element of DNA at a significantly higher rate (as compared to unsynchronized cells) during G1 phase. Other time points show levels of DNA-nuclear protein binding similar to the unsynchronized control. We also measured the apparent association complex of the binding to be 0.014 s -1 . We conclude that (1) SPR-based assays can monitor DNA-nuclear protein binding and that (2) for this particular cis-regulatory element, maximum DNA-nuclear protein binding occurs during G1 phase

Seed Treatment Combined with a Spot Application of Clothianidin Granules Prolongs the Efficacy of Controlling Piercing-Sucking Insect Pests in Cotton Fields.

Science.gov (United States)

Zhang, Zhengqun; Zhao, Yunhe; Wang, Yao; Li, Beixing; Lin, Jin; Zhang, Xuefeng; Mu, Wei

2017-09-13

Seed treatments can directly protect cotton from early season piercing-sucking insect Aphis gossypii Glover but hardly provide long-term protection against Apolygus lucorum (Meyer-Dür). Therefore, the efficacy of clothianidin seed treatments combined with spot applications of clothianidin granules at the bud stage of cotton was evaluated to control piercing-sucking pests during the entire cotton growing season. Clothianidin seed treatments (at the rate of 4 g ai/kg seed) combined with a clothianidin granular treatment (even at low rate of 0.9 kg ai/ha) at the bud stage can effectively suppress A. gossypii and A. lucorum infestations throughout the seedling and blooming stages after planting and can improve cotton yield. The spot application of clothianidin granules also reduced the population densities of Bemisia tabaci (Gennadius). The dynamic changes of clothianidin residues demonstrated that the control efficacy of clothianidin against A. gossypii and A. lucorum might be related to the residues of this neonicotinoid in cotton leaves. This pest management practice provided long-term protection against cotton piercing-sucking pests for the entire growing season of cotton plants and could supplement the short-term control efficiency of clothianidin used as a seed treatment.

Informační systém pro správu rezervací v restauracích

OpenAIRE

Slanař, David

2009-01-01

Tato bakalářská práce pojednává o stávajícím stavu fungování rezervací v restauracích a jeho inovaci pomocí zavedení informačního systému pro vytváření a správu rezervací. Popisuje návrh internetové webové aplikace umožňující on-line vytváření rezervací samotnými uživateli a jejich následnou správu zaměstnanci. Dále popis ekonomického přínosu a jiných výhod plynoucích ze zavedení tohoto systému v reálném světě a v neposlední řadě řešení případných problémů při nasazování systému v praxi. T...

Potential of the McMath-Pierce 1.6-Meter Solar Telescope for Speckle Interferometry

Science.gov (United States)

Harshaw, Richard; Jones, Gregory; Wiley, Edward; Boyce, Patrick; Branston, Detrick; Rowe, David; Genet, Russell

2015-09-01

We explored the aiming and tracking accuracy of the McMath-Pierce 1.6 m solar telescope at Kitt Peak National Observatory as part of an investigation of using this telescope for speckle interferometry of close visual double stars. Several slews of various lengths looked for hysteresis in the positioning system (we found none of significance) and concluded that the 1.6 m telescope would make a useful telescope for speckle interferometry.

The influence of beam boundaries and velocity reduction on Pierce instability in laboratory plasmas

International Nuclear Information System (INIS)

Jovanovic, D.

1982-01-01

The influences of the beam-plasma boundary and of weak nonlinearities on the Pierce instability are investigated. It is shown that the finite width of the beam has negligible influence on both the stability of the system and growth rate. In the nonlinear regime the wavelength decreases and enhancement of the wave potential close to the beam inlet boundary is observed. The relationship between this effect and the formation of double layers is discussed. (Auth.)

Close Binary Star Speckle Interferometry on the McMath-Pierce 0.8-Meter Solar Telescope

Science.gov (United States)

Wiley, Edward; Harshaw, Richard; Jones, Gregory; Branston, Detrick; Boyce, Patrick; Rowe, David; Ridgely, John; Estrada, Reed; Genet, Russell

2015-09-01

Observations were made in April 2014 to assess the utility of the 0.8-meter solar telescope at the McMath-Pierce Solar Observatory at Kitt Peak National Observatory for performing speckle interferometry observations of close binary stars. Several configurations using science cameras, acquisition cameras, eyepieces, and flip mirrors were evaluated. Speckle images were obtained and recommendations for further improvement of the acquisition system are presented.

Compositions and Methods for the Treatment of Pierce's Disease

Energy Technology Data Exchange (ETDEWEB)

Gupta, Goutam (Santa Fe, NM)

2008-10-07

Chimeric anti-microbial proteins, compositions, and methods for the therapeutic and prophylactic treatment of plant diseases caused by the bacterial pathogen Xylella fastidiosa are provided. The anti-microbial proteins of the invention generally comprise a surface recognition domain polypeptide, capable of binding to a bacterial membrane component, fused to a bacterial lysis domain polypeptide, capable of affecting lysis or rupture of the bacterial membrane, typically via a fused polypeptide linker. In particular, methods and compositions for the treatment or prevention of Pierce's disease of grapevines are provided. Methods for the generation of transgenic Vitus vinefera plants expressing xylem-secreted anti-microbial chimeras are also provided.

Correction: Cecotti, H. and Rivet, B. Subject Combination and Electrode Selection in Cooperative Brain-Computer Interface Based on Event Related Potentials. Brain Sci. 2014, 4, 335–355

Directory of Open Access Journals (Sweden)

Hubert Cecotti

2014-09-01

Full Text Available The authors wish to make the following correction to this paper (Cecotti, H.; Rivet, B. Subject Combination and Electrode Selection in Cooperative Brain-Computer Interface Based on Event Related Potentials. Brain Sci. 2014, 4, 335–355: Due to an internal error, the reference numbers in the original published paper were not shown, and the error was not due to the authors. The former main text should be replaced as below.

Signal amplification and Pierce's instability in convergent particle beams

International Nuclear Information System (INIS)

Gnavi, G.; Gratton, F.T.

1988-01-01

Relativistic electron beams flowing between cylindrical and spherical electrodes (or solid angles sections of electrodes with these geometries) are studied. The beams are focused through the axis in the cylindrical case or through the center when spherical electrodes are considered. It is assumed that the external electrode is part of a device which accelerates the particles, the inner electrode is passive and removes the beams from the system. Electrons move by inertia in the interelectrode space, neutralized by an ion background. Properties of radial, small amplitude, perturbations are analyzed theoretically. Previous analyses of counterstreaming beams indicated that convergence modifies considerably the oscillations spectrum. Here, results on the amplification of signals when a beam is modulated at the external electrode are reported. Then, conditions for the instability of a beam when it flows through grounded electrodes (Pierce's instability of only one beam) are examined

Comparative study of SPR and ELISA methods based on analysis of CD166/ALCAM levels in cancer and control human sera

Czech Academy of Sciences Publication Activity Database

Vaisocherová, Hana; Faca, V.M.; Taylor, A. D.; Hanash, S.; Jiang, S.

2009-01-01

Roč. 24, č. 7 (2009), s. 2143-2148 ISSN 0956-5663 Institutional research plan: CEZ:AV0Z20670512 Keywords : SPR * ELISA * Cancer biomarkers Subject RIV: CE - Biochemistry Impact factor: 5.429, year: 2009

Undersøgelse af pulsformers indflydelse på piercing og skæring i rummet

DEFF Research Database (Denmark)

Horstmann, Birgitte D.; Juhl, Thomas Winther

1999-01-01

Der er gennem en række laboratorieforsøg gennemført piercing og hjørneskæring i rummet (3D) i AISI 316 stål. Det er blevet konstateret at der kan opnås piercingtider på ned til ca. 1 sekund i det anvendte 5 mm pladestål. Tre forskellige pulsformer, Gated puls, Hyper puls og Super puls er blevet...

CLOSURE OF THE SELF-SERVICE STORES ON THE MEYRIN AND PREVESSIN SITES

CERN Multimedia

SPL Division

2001-01-01

Following a study pointing to the low turnover of a large proportion of the items stocked, the low average value of 'purchases' and the relatively high running costs, the Management Board decided at its meeting on 28.5.2001 to close the self-service stores on the Meyrin and Prévessin sites at the end of 2001, provided that all items were available via EDH by then and that satisfactory access could be provided for the CERN users. As these conditions have now been fulfilled, users are hereby informed that the self-service stores will be closed as follows: The Meyrin self-service store will close as of 1st December 2001. The Prévessin self-service store will close as of 1st January 2002. All standard items (including nuts, bolts, screws, nails and rivets - item 47 of the stores catalogue) may be ordered from the Central Store via EDH using the 'Material Request' form and will be delivered within 24 hours. In urgent cases, items may be collected from one of the emergency counters at the ...

MEN ARE INNOCENT UNTIL PROVEN GUILTY - A COMMENT ON THE EXAMINATION OF SEX-DIFFERENCES BY PIERCE AND KIRKPATRICK

NARCIS (Netherlands)

PICKERSGILL, MJ; ARRINDELL, WA

1992-01-01

Pierce and Kirkpatrick (1992, Behaviour Research and Therapy, 30, 415-418) addressed the finding that men reported lower levels of fear than women in response to specific fear items and concluded on the basis of their experiment that this was because the men were lying. Their conclusion is

Chaos control in an electron beam with the supercritical current in the hydrodynamic model of the Pierce diode

International Nuclear Information System (INIS)

Koronovskij, A.A.; Rempen, I.S.; Khramov, A.E.

2003-01-01

The possibility of controlling the chaos in the electron beam with the supercritical current in the hydrodynamic model of the Pierce diode through the continuous feedback; the methodology of controlling the chaotic dynamics through stabilization of the unstable equilibrium state in the distributed active medium is proposed [ru

Plasma processing of the Si(0 0 1) surface for tuning SPR of Au/Si-based plasmonic nanostructures

Energy Technology Data Exchange (ETDEWEB)

Giangregorio, Maria M. [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR and INSTM sez. Bari, Via Orabona 4, 70125 Bari (Italy)]. E-mail: michelaria.giangregorio@ba.imip.cnr.it; Losurdo, Maria [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR and INSTM sez. Bari, Via Orabona 4, 70125 Bari (Italy); Sacchetti, Alberto [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR and INSTM sez. Bari, Via Orabona 4, 70125 Bari (Italy); Capezzuto, Pio [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR and INSTM sez. Bari, Via Orabona 4, 70125 Bari (Italy); Bruno, Giovanni [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR and INSTM sez. Bari, Via Orabona 4, 70125 Bari (Italy)

2006-12-15

Au nanoclusters have been deposited on Si(0 0 1) surfaces by sputtering of a metallic Au target using an Ar plasma. Different wet and dry treatments of the Si(0 0 1) surface, including dipping in HF solution and exposure to H{sub 2} and N{sub 2} plasmas, have been applied and the effects of these treatments on the Au nanoparticles/Si interface, the Au nanoclusters aspect ratio and the surface plasmon resonance (SPR) energy and amplitude are investigated exploiting spectroscopic ellipsometry and atomic force microscopy. It is found that the Au nanoclusters aspect ratio depends on the extent of the Au-Si intermixing. The thicker the Au-Si interface layer, the larger the Au nanoparticles aspect ratio and the red-shift of the SPR peak. Furthermore, SiO{sub 2} and the H{sub 2} plasma treatment inhibit the Si-Au intermixing, while HF-dipping and the N{sub 2} plasma treatment favour Au-Si intermixing, yielding silicide formation which increases the Si wetting by Au.

Lidar-revised geologic map of the Poverty Bay 7.5' quadrangle, King and Pierce Counties, Washington

Science.gov (United States)

Tabor, Rowland W.; Booth, Derek B.; Troost, Kathy Goetz

2014-01-01

For this map, we interpreted a 6-ft-resolution lidar digital elevation model combined with the geology depicted on the Geologic Map of the Poverty Bay 7.5' Quadrangle, King and Pierce Counties, Washington (Booth and others, 2004b). The authors of the 2004 map described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Poverty Bay 7.5' quadrangle.

Can superconducting cosmic strings piercing seed black holes generate supermassive black holes in the early universe?

Energy Technology Data Exchange (ETDEWEB)

Lake, Matthew J. [The Institute for Fundamental Study, ' ' The Tah Poe Academia Institute' ' , Naresuan University, Phitsanulok (Thailand); Thailand Center of Excellence in Physics, Ministry of Education, Bangkok (Thailand); Harko, Tiberiu [Department of Physics, Babes-Bolyai University, Cluj-Napoca (Romania); Department of Mathematics, University College London (United Kingdom)

2017-10-15

The discovery of a large number of supermassive black holes (SMBH) at redshifts z > 6, when the Universe was only 900 million years old, raises the question of how such massive compact objects could form in a cosmologically short time interval. Each of the standard scenarios proposed, involving rapid accretion of seed black holes or black hole mergers, faces severe theoretical difficulties in explaining the short-time formation of supermassive objects. In this work we propose an alternative scenario for the formation of SMBH in the early Universe, in which energy transfer from superconducting cosmic strings piercing small seed black holes is the main physical process leading to rapid mass increase. As a toy model, the accretion rate of a seed black hole pierced by two antipodal strings carrying constant current is considered. Using an effective action approach, which phenomenologically incorporates a large class of superconducting string models, we estimate the minimum current required to form SMBH with masses of order M = 2 x 10{sup 9} M {sub CircleDot} by z = 7.085. This corresponds to the mass of the central black hole powering the quasar ULAS J112001.48+064124.3 and is taken as a test case scenario for early-epoch SMBH formation. For GUT scale strings, the required fractional increase in the string energy density, due to the presence of the current, is of order 10{sup -7}, so that their existence remains consistent with current observational bounds on the string tension. In addition, we consider an ''exotic'' scenario, in which an SMBH is generated when a small seed black hole is pierced by a higher-dimensional F-string, predicted by string theory. We find that both topological defect strings and fundamental strings are able to carry currents large enough to generate early-epoch SMBH via our proposed mechanism. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Sambandet mellan Theory of Mind, språkliga förmågor och exekutiva funktioner hos barn i treårsåldern

OpenAIRE

Nilsson, Anna; Sirén, Ellen

2015-01-01

Barns fem första levnadsår präglas av en omfattande utveckling av språkliga förmågor och exekutiva funktioner, vilka är färdigheter som visat sig ha en stor påverkan på hur barn utvecklar förståelse för sina egna och andras tankar, det vill säga deras Theory of Mind. En central aspekt inom forskning har varit att undersöka hur förmågorna samvarierar vid olika åldrar. Syftet i föreliggande studie var att undersöka sambandet mellan Theory of Mind, språkliga förmågor och exekutiva funktioner hos...

Amistades Internacionales como contribución a la paz. La correspondencia entre Paul Rivet y Theodor Koch - Grünberg en el contexto de la Primera Guerra Mundial.

Directory of Open Access Journals (Sweden)

Michael Kraus.

2010-07-01

Full Text Available This article analyzes the correspondence between the French anthropologist paul rivet (1876-1958, and the german anthropologist theodor Koch-grünberg (1872-1924 after the First World War. the letters illustrate how both anthropologists struggled to reactivate the scientifc exchange between the two nations which had been interrupted by the war. their interest in common research themes, which had always transcended their national borders, established a collaborative attempt to overcome hostility and further appreciate international discourses over national ideologies.

Reforma veřejné správy: analýza Strategie realizace Smart Administration

OpenAIRE

Hurychová, Tereza

2016-01-01

This diploma thesis is mainly to explain the significance of the document Efektivní veřejná správa a přátelské služby: Strategie realizace Smart Administration 2007 - 2015 2015 (Efficient public administration and friendly service: Smart Administration Strategy 2007 - 2015) in the context of the reform process of public administration in the Czech republic. The author′s point of view is based of the theory of change, strategic managment and modern managment methods in public administration. A...

Real-time monitoring of mycobacterium genomic DNA with target-primed rolling circle amplification by a Au nanoparticle-embedded SPR biosensor.

Science.gov (United States)

Xiang, Yang; Zhu, Xiaoyan; Huang, Qing; Zheng, Junsong; Fu, Weiling

2015-04-15

In this study, we developed a surface plasmon resonance (SPR) DNA biosensor array based on target-primed rolling circle amplification (RCA) for isothermal and rapid detection of two pathogenic mycobacteria, Mycobacterium tuberculosis complex (MTBC) and Mycobacterium avium complex (MAC).The species-specific padlock probe (PLP) was designed to target the sequence in 16S-23S rRNA gene internal transcribed spacer (ITS). After ligation, the circularized PLP could be primed by the target sequence to initial RCA. The RCA performed simultaneously with the cleavage reaction to produce small fragments of single strand DNA which immediately hybridized with the probe immobilized on the sensor chip without denaturation. This process caused SPR angle changes on the chip surface, which made the detection for analysis from the solution achievable, and dynamic real-time RCA monitoring of mycobacterium possible. Besides, Au nanoparticles (AuNPs) were directly assembled onto the surface of the sensor chip via hexanedithiol (HDT) for the enhancement of sensitivity as a label-free detection system. Experimental results show that the signal enhancement by the target-primed RCA together with AuNPs-embedded surface caused at least10-fold increased sensitivity as compared with conventional RCA on bare SPR chip method. Within 40min amplification duration as low as 20amol of synthetic targets and 10(4)CFUmL(-1) of genomic DNA from clinical samples can be detected. The proposed method not only provides a simple design idea for liquid-phase amplification monitoring, but also apply it in clinical pathogen detection, which holds great promise in ultrasensitive bioassay in the future. Copyright © 2014. Published by Elsevier B.V.

Relationships among Work Life, Mental Health Status and Organisation-based Self-esteem

OpenAIRE

Devin Hassan Fahim; Farbod Davood

2016-01-01

Quality of Work Life (QWL) is a multi-dimensional concept that covers employees’ feelings about various dimensions of work. The current study focused on QWL that can contribute to the mental health status and Organisation-Based Self-Esteem (OBSE) of employees in context of sport organisation in Iran. In this descriptive–correlative study, data was collected using three standard questionnaires: Goldberg’s (1978) General Health Questionnaire (GHQ-12), Pierce, Gardner, Cummings and Dunham's (198...

Ventilation Inception and Washout, Scaling, and Effects on Hydrodynamic Performance of a Surface Piercing Strut

Science.gov (United States)

Harwood, Casey; Young, Yin Lu; Ceccio, Steven

2014-11-01

High-lift devices that operate at or near a fluid free surface (such as surface-piercing or shallowly-submerged propellers and hydrofoils) are prone to a multiphase flow phenomenon called ventilation, wherein non-condensable gas is entrained in the low-pressure flow, forming a cavity around the body and dramatically altering the global hydrodynamic forces. Experiments are being conducted at the University of Michigan's towing tank using a canonical surface-piercing strut to investigate atmospheric ventilation. The goals of the work are (i) to gain an understanding of the dominant physics in fully wetted, partially ventilated, and fully ventilated flow regimes, (ii) to quantify the effects of governing dimensionless parameters on the transition between flow regimes, and (iii) to develop scaling relations for the transition between flow regimes. Using theoretical arguments and flow visualization techniques, new criteria are developed for classifying flow regimes and transition mechanisms. Unsteady transition mechanisms are described and mapped as functions of the governing non-dimensional parameters. A theoretical scaling relationship is developed for ventilation washout, which is shown to adequately capture the experimentally-observed washout boundary. This material is based upon work supported by the National Science Foundation Graduate Student Research Fellowship under Grant No. DGE 1256260. Support also comes from the Naval Engineering Education Center (Award No. N65540-10-C-003).

Measurement of electron beams profile of pierce type electron source using sensor of used Tv tube

International Nuclear Information System (INIS)

Darsono; Suhartono; Suprapto; Elin Nuraini

2015-01-01

The measurement of an electron beam profile has been performed using electron beam monitor based on method of phosphorescent materials. The main components of the electron beam monitor consists of a fluorescent sensor using a used Tv tube, CCTV camera to record images on a Tv screen, video adapter as interface between CCTV and laptop, and the laptop as a viewer and data processing. Two Pierce-type electron sources diode and triode was measured the shape of electron beam profile in real time. Results of the experiments showed that the triode electron source of Pierce type gave the shape of electron beam profiles better than that of the diode electron source .The anode voltage is not so influential on the beam profile shape. The focused voltage in the triode electron source is so influence to the shape of the electron beam profile, but above 5 kV no great effect. It can be concluded that the electron beam monitor can provide real time observations and drawings shape of the electron beam profile displayed on the used Tv tube glass screen which is the real picture of the shape of the electron beam profile. Triode electron source produces a better electron beam profile than that of the diode electron source. (author)

Body piercing and tattoo: awareness of health related risks among 4,277 Italian secondary school adolescents

Science.gov (United States)

2010-01-01

Background The awareness of health risks associated with body art among secondary school pupils has never previously been studied in depth. A large sample of secondary school adolescents from the Veneto Region (North East Italy) were investigated in order to inform health education programs. Methods 6 public secondary schools from each of the 7 Provinces of the Veneto Region were selected. All students attending the 1st, 3rd, and 5th school years were surveyed by an anonymous self administered questionnaire on their perception of health risks related to body art and other explanatory variables. Logistic regression analysis was employed, reporting adjusted Odds Ratios (OR) with 95% Confidence Interval (CI). Results Among 4,277 available students (aged 14-22 years), boys were consistently: less knowledgeable of infectious diseases related to body art (OR = 0.78; CI: 0.66, 0.94), less likely to be aware of the hygienic norms to be observed in a body art parlour (OR = 0.54; 0.44, 0.65), less likely to refer to a certified body art parlour (OR = 0.56; 0.48, 0.66), less likely to refer to a professional health care provider for complications related to body art (OR = 0.71; 0.59, 0.86). Students attending the first school year (baseline) had a lesser knowledge of body art related infectious diseases, were less likely to refer to a certified body art parlour, and to know the mandatory hygienic rules to be observed when performing body modifications. Interviewees from the provinces of Rovigo and Vicenza were less likely to be conscious of the health risks associated with body modifications, and those with tattoos were less knowledgeable about the infection risk (OR = 0.60; 0.42, 0.86) and less likely to refer to a professional health care provider in case of medical complication (OR = 0.68;0.48, 0.95). Students with piercings were less likely to refer to a certified practitioner for receiving body art (OR = 0.62; 0.50, 0.77) or therapy for medical complications (OR = 0

Body piercing and tattoo: awareness of health related risks among 4,277 Italian secondary school adolescents

Directory of Open Access Journals (Sweden)

Mazzoleni Francesco

2010-02-01

Full Text Available Abstract Background The awareness of health risks associated with body art among secondary school pupils has never previously been studied in depth. A large sample of secondary school adolescents from the Veneto Region (North East Italy were investigated in order to inform health education programs. Methods 6 public secondary schools from each of the 7 Provinces of the Veneto Region were selected. All students attending the 1st, 3rd, and 5th school years were surveyed by an anonymous self administered questionnaire on their perception of health risks related to body art and other explanatory variables. Logistic regression analysis was employed, reporting adjusted Odds Ratios (OR with 95% Confidence Interval (CI. Results Among 4,277 available students (aged 14-22 years, boys were consistently: less knowledgeable of infectious diseases related to body art (OR = 0.78; CI: 0.66, 0.94, less likely to be aware of the hygienic norms to be observed in a body art parlour (OR = 0.54; 0.44, 0.65, less likely to refer to a certified body art parlour (OR = 0.56; 0.48, 0.66, less likely to refer to a professional health care provider for complications related to body art (OR = 0.71; 0.59, 0.86. Students attending the first school year (baseline had a lesser knowledge of body art related infectious diseases, were less likely to refer to a certified body art parlour, and to know the mandatory hygienic rules to be observed when performing body modifications. Interviewees from the provinces of Rovigo and Vicenza were less likely to be conscious of the health risks associated with body modifications, and those with tattoos were less knowledgeable about the infection risk (OR = 0.60; 0.42, 0.86 and less likely to refer to a professional health care provider in case of medical complication (OR = 0.68;0.48, 0.95. Students with piercings were less likely to refer to a certified practitioner for receiving body art (OR = 0.62; 0.50, 0.77 or therapy for medical

Three dimensional simulation for bayou choctaw strategic petroleum reserve (SPR).

Energy Technology Data Exchange (ETDEWEB)

Ehgartner, Brian L. (Sandia National Laboratories, Albuquerque, NM); Park, Byoung Yoon; Lee, Moo Yul

2006-12-01

Three dimensional finite element analyses were performed to evaluate the structural integrity of the caverns located at the Bayou Choctaw (BC) site which is considered a candidate for expansion. Fifteen active and nine abandoned caverns exist at BC, with a total cavern volume of some 164 MMB. A 3D model allowing control of each cavern individually was constructed because the location and depth of caverns and the date of excavation are irregular. The total cavern volume has practical interest, as this void space affects total creep closure in the BC salt mass. Operations including both cavern workover, where wellhead pressures are temporarily reduced to atmospheric, and cavern enlargement due to leaching during oil drawdowns that use water to displace the oil from the caverns, were modeled to account for as many as the five future oil drawdowns in the six SPR caverns. The impacts on cavern stability, underground creep closure, surface subsidence, infrastructure, and well integrity were quantified.

Is piercing the veil contrary to high authority? A footnote to the "never-ending story"

OpenAIRE

Breakey, Peter

2013-01-01

Reviews the Supreme Court ruling in VTB Capital Plc v Nutritek International Corp, and reflects on Lord Neuberger's argument that piercing the corporate veil is "contrary to high authority". Examines the background to the decision, details the court's treatment of the earlier House of Lords ruling in Woolfson v Strathclyde RC, and analyses the ratio of Woolfson and that of the House of Lords judgment in Salomon v Salomon. Considers the opportunity for the Supreme Court to provide further clar...

Testing of the McMath-Pierce 0.8-Meter East Auxiliary Telescope's Acquisition and Slewing Accuracy

Science.gov (United States)

Harshaw, Richard; Ray, Jimmy; Prause, Lori; Douglass, David; Branston, Detrick; Genet, Russell M.

2015-09-01

Following mediocre results with pointing tests of the McMath-Pierce 0.8-meter East Auxiliary Telescope in April 2014, a team of astronomers/engineers met again in May 2014 to test other pointing models and assess the telescope's ability to point with enough accuracy to permit the efficient use of speckle interferometry. Results show that accurate collimation is a pre-requisite for such accuracy. Once attained, the telescope performs extremely well.

Colorimetric Analysis on Flocculation of Bioinspired Au Self-Assembly for Biophotonic Application

Directory of Open Access Journals (Sweden)

Wan-Joong Kim

2009-01-01

Full Text Available Gold nanoparticles exhibited strong surface plasmon absorption and couplings between neighboring particles within bioactivated self-assembly modified their optical properties. Colorimetric analysis on the optical modification of surface plasmon resoanance (SPR shift and flocculation parameter functionalized bioinspired gold assembly for biophotonic application. The physical origin of bioinspired gold aggregation-induced shifting, decreasing, or broadening of the plasmon absorption spectra could be explained in terms of dynamic depolarization, collisional damping, and shadowing effects.

Analysis of cavern stability at the West Hackberry SPR site.

Energy Technology Data Exchange (ETDEWEB)

Ehgartner, Brian L.; Sobolik, Steven Ronald

2009-05-01

This report presents computational analyses that simulate the structural response of caverns at the Strategic Petroleum Reserve (SPR) West Hackberry site. The cavern field comprises 22 caverns. Five caverns (6, 7, 8, 9, 11) were acquired from industry and have unusual shapes and a history dating back to 1946. The other 17 caverns (101-117) were leached according to SPR standards in the mid-1980s and have tall cylindrical shapes. The history of the caverns and their shapes are simulated in a three-dimensional geomechanics model of the site that predicts deformations, strains, and stresses. Future leaching scenarios corresponding to oil drawdowns using fresh water are also simulated by increasing the volume of the caverns. Cavern pressures are varied in the model to capture operational practices in the field. The results of the finite element model are interpreted to provide information on the current and future status of subsidence, well integrity, and cavern stability. The most significant results in this report are relevant to Cavern 6. The cavern is shaped like a bowl with a large ceiling span and is in close proximity to Cavern 9. The analyses predict tensile stresses at the edge of the ceiling during repressuization of Cavern 6 following workover conditions. During a workover the cavern is at low pressure to service a well. The wellhead pressures are atmospheric. When the workover is complete, the cavern is repressurized. The resulting elastic stresses are sufficient to cause tension around the edge of the large ceiling span. With time, these stresses relax to a compressive state because of salt creep. However, the potential for salt fracture and propagation exists, particularly towards Cavern 9. With only 200 ft of salt between the caverns, the operational consequences must be examined if the two caverns become connected. A critical time may be during a workover of Cavern 9 in part because of the operational vulnerabilities, but also because dilatant damage is

Self-Calibrating Ultrasonic Methods for In-Situ Monitoring of Fatigue Crack Progression

International Nuclear Information System (INIS)

Michaels, J.E.; Mi, B.; Cobb, A.C.; Michaels, T.E.; Stobbe, D.M.

2005-01-01

Ultrasonic sensors permanently affixed to aluminum coupons are used to monitor progression of damage during fatigue testing with the long term goal of structural health monitoring for diagnostics and prognostics. Necessary for success are proper design of the ultrasonic testing methods, robust transducer mounting techniques, and real-time signal processing for determining the state of the structure. It is also highly desirable for the overall system to be self-calibrating with built-in diagnostics in order to detect and compensate for sensor degradation or failure. Self-calibrating ultrasonic techniques are applied for monitoring of cracks initiating and propagating from the inaccessible inner diameters of rivet holes where the transducers are mounted on the accessible specimen surface. Angle beam ultrasonic methods are utilized that are suitable for detecting small defects in critical local regions of high stress. Results are presented for aluminum coupons subjected to low cycle fatigue and demonstrate ultrasonic tracking of crack growth

Screening and analysis of beyond design basis accident of 49-2 SPR

International Nuclear Information System (INIS)

Zhang Yadong; Guo Yue; Wu Yuanyuan; Zou Yao

2015-01-01

The beyond design basis accident was analyzed to ensure safe operation of 49-2 Swimming Pool Reactor (SPR) after design life. Because it's difficult to use PSA method, the unconditional assumed severe accidents were adopted to obtain a conservative result. The main conclusions were obtained by analyzing anticipated transients without scram in station blackout (SBO ATWS), horizontal channel rupture, core uncovering after shutdown and emergency response capacity. The results show that the core is safe in SBO ATWS, and the fuel elements will not melt as long as the core are not exposed in 2.5 h in loss of coolant accident caused by horizontal channel rupture and other factors. The passive siphon breaker function and various ways of emergency core makeup can ensure that the core is not exposed. (authors)

Preparation and characterization of thin organosilicon films deposited on SPR chip

Energy Technology Data Exchange (ETDEWEB)

Szunerits, Sabine [Laboratoire d' Electrochimie et de Physicochimie des Materiaux et des Interfaces (LEPMI), CNRS-INPG-UJF, 1130 rue de la piscine, BP 75, 38402 St. Martin d' Heres Cedex (France)], E-mail: sabine.szunerits@lepmi.inpg.fr; Rich, Sami Abou [Laboratoire de Genie des Procedes d' Interaction de Fluides Reactifs-Materiaux U.S.T.L., Cite Scientifique, 59655 Villeneuve d' Ascq (France); Coffinier, Yannick [Institut de Recherche Interdisciplinaire (IRI), FRE CNRS 2963, Institut d' lectronique, de Microelectronique et de Nanotechnologie (IEMN), UMR CNRS-8520, Cite Scientifique, Avenue Poincare, BP 60069, 59652 Villeneuve d' Ascq (France); Languille, Marie-Angelique [Unite de Catalyse et de Chimie du Solide, UCCS UMR CNRS-8181, Universite des Sciences et Technologies de Lille, Bat. C3, 59655 Villeneuve d' Ascq (France); Supiot, Philippe [Laboratoire de Genie des Procedes d' Interaction de Fluides Reactifs-Materiaux U.S.T.L., Cite Scientifique, 59655 Villeneuve d' Ascq (France); Boukherroub, Rabah [Institut de Recherche Interdisciplinaire (IRI), FRE CNRS 2963, Institut d' lectronique, de Microelectronique et de Nanotechnologie (IEMN), UMR CNRS-8520, Cite Scientifique, Avenue Poincare, BP 60069, 59652 Villeneuve d' Ascq (France)], E-mail: rabah.boukherroub@iemn.univ-lille1.fr

2008-04-20

The paper reports on the preparation and characterization of organosilicon thin polymer films deposited on glass slides coated with 5 nm adhesion layer of titanium and 50 nm of gold. The polymer was obtained by the decomposition of 1,1,3,3-tetramethyldisiloxane precursor (TMDSO) premixed with oxygen induced in a N{sub 2} plasma afterglow using remote plasma-enhanced chemical vapor deposition (PECVD) technique. The film thickness was controlled by laser interferometry and was 9 nm. The chemical stability of the gold substrate coated with the organosilicon polymer film (p-TMDSO) was studied in different acidic and basic solutions (pH 1-14). While the gold/polymer interface showed a high stability in acidic media, the film was almost completely removed in basic solutions. The resulting surfaces were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), water contact angle measurements, cyclic voltammetry, and surface plasmon resonance (SPR)

Preparation and characterization of thin organosilicon films deposited on SPR chip

International Nuclear Information System (INIS)

Szunerits, Sabine; Rich, Sami Abou; Coffinier, Yannick; Languille, Marie-Angelique; Supiot, Philippe; Boukherroub, Rabah

2008-01-01

The paper reports on the preparation and characterization of organosilicon thin polymer films deposited on glass slides coated with 5 nm adhesion layer of titanium and 50 nm of gold. The polymer was obtained by the decomposition of 1,1,3,3-tetramethyldisiloxane precursor (TMDSO) premixed with oxygen induced in a N 2 plasma afterglow using remote plasma-enhanced chemical vapor deposition (PECVD) technique. The film thickness was controlled by laser interferometry and was 9 nm. The chemical stability of the gold substrate coated with the organosilicon polymer film (p-TMDSO) was studied in different acidic and basic solutions (pH 1-14). While the gold/polymer interface showed a high stability in acidic media, the film was almost completely removed in basic solutions. The resulting surfaces were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), water contact angle measurements, cyclic voltammetry, and surface plasmon resonance (SPR)

Formation and Characterization of Self-Assembled Phenylboronic Acid Derivative Monolayers toward Developing Monosaccaride Sensing-Interface

Directory of Open Access Journals (Sweden)

Kwangnak Koh

2007-08-01

Full Text Available We designed and synthesized phenylboronic acid as a molecular recognitionmodel system for saccharide detection. The phenylboronic acid derivatives that haveboronic acid moiety are well known to interact with saccharides in aqueous solution; thus,they can be applied to a functional interface of saccharide sensing through the formation ofself-assembled monolayer (SAM. In this study, self-assembled phenylboronic acidderivative monolayers were formed on Au surface and carefully characterized by atomicforce microscopy (AFM, Fourier transform infrared reflection absorption spectroscopy(FTIR-RAS, surface enhanced Raman spectroscopy (SERS, and surface electrochemicalmeasurements. The saccharide sensing application was investigated using surface plasmonresonance (SPR spectroscopy. The phenylboronic acid monolayers showed goodsensitivity of monosaccharide sensing even at the low concentration range (1.0 × 10-12 M.The SPR angle shift derived from interaction between phenylboronic acid andmonosaccharide was increased with increasing the alkyl spacer length of synthesizedphenylboronic acid derivatives.

Label-free SPR detection of gluten peptides in urine for non-invasive celiac disease follow-up.

Science.gov (United States)

Soler, Maria; Estevez, M-Carmen; Moreno, Maria de Lourdes; Cebolla, Angel; Lechuga, Laura M

2016-05-15

Motivated by the necessity of new and efficient methods for dietary gluten control of celiac patients, we have developed a simple and highly sensitive SPR biosensor for the detection of gluten peptides in urine. The sensing methodology enables rapid and label-free quantification of the gluten immunogenic peptides (GIP) by using G12 mAb. The overall performance of the biosensor has been in-depth optimized and evaluated in terms of sensitivity, selectivity and reproducibility, reaching a limit of detection of 0.33 ng mL(-1). Besides, the robustness and stability of the methodology permit the continuous use of the biosensor for more than 100 cycles with excellent repeatability. Special efforts have been focused on preventing and minimizing possible interferences coming from urine matrix enabling a direct analysis in this fluid without requiring extraction or purification procedures. Our SPR biosensor has proven to detect and identify gluten consumption by evaluating urine samples from healthy and celiac individuals with different dietary gluten conditions. This novel biosensor methodology represents a novel approach to quantify the digested gluten peptides in human urine with outstanding sensitivity in a rapid and non-invasive manner. Our technique should be considered as a promising opportunity to develop Point-of-Care (POC) devices for an efficient, simple and accurate gluten free diet (GFD) monitoring as well as therapy follow-up of celiac disease patients. Copyright © 2015 Elsevier B.V. All rights reserved.

Assaying Auxin Receptor Activity Using SPR Assays with F-Box Proteins and Aux/IAA Degrons.

Science.gov (United States)

Quareshy, Mussa; Uzunova, Veselina; Prusinska, Justyna M; Napier, Richard M

2017-01-01

The identification of TIR1 as an auxin receptor combined with advanced biophysical instrumentation has led to the development of real-time activity assays for auxins. Traditionally, molecules have been assessed for auxinic activity using bioassays, and agrochemical compound discovery continues to be based on "spray and pray" technologies. Here, we describe the methodology behind an SPR-based assay that uses TIR1 and related F-box proteins with surface plasmon resonance spectrometry for rapid compound screening. In addition, methods for collecting kinetic binding data and data processing are given so that they may support programs for rational design of novel auxin ligands.

SPR sensors for monitoring the degradation processes of Eu(dbm)3(phen) and Alq3 thin films under atmospheric and UVA exposure

Science.gov (United States)

Del Rosso, T.; Zaman, Q.; Cremona, M.; Pandoli, O.; Barreto, A. R. J.

2018-06-01

The degradation processes of tris(8-hydroxyquinoline) (Alq3) and tris(dibenzoylmethane) mono(1,10-phenanthroline)europium(III) (Eu(dbm)3(phen)) thin films are investigated by the use of AFM, photoluminescence and SPR spectroscopy. The plasmonic sensors are operated both in air and nitrogen environments, where they are irradiated with controlled doses of UVA radiation. AFM results don't reveal the formation of heterogeneous phases and crystallization under air exposure. The organic thin films change their refractive index under both types of exposure and act as a protective layer against oxidation for the SiO2/MPTS/metal interface of the plasmonic sensors. SPR measurements reveal a strict correlation between the refractive index increase and quenching of the photoluminescence of the organic thin films. The results are promising for the development of compact plasmonic UVA dosimeters in the surface plasmon coupled emission configuration (SPCE) with lanthanide β-diketonate complex materials (patent pending).

A systematic review of animal predation creating pierced shells: implications for the archaeological record of the Old World.

Science.gov (United States)

Kubicka, Anna Maria; Rosin, Zuzanna M; Tryjanowski, Piotr; Nelson, Emma

2017-01-01

The shells of molluscs survive well in many sedimentary contexts and yield information about the diet of prehistoric humans. They also yield evidence of symbolic behaviours through their use as beads for body adornments. Researchers often analyse the location of perforations in shells to make judgements about their use as symbolic objects (e.g., beads), the assumption being that holes attributable to deliberate human behaviour are more likely to exhibit low variability in their anatomical locations, while holes attributable to natural processes yield more random perforations. However, there are non-anthropogenic factors that can cause perforations in shells and these may not be random. The aim of the study is compare the variation in holes in shells from archaeological sites from the Old World with the variation of holes in shells pierced by mollusc predators. Three hundred and sixteen scientific papers were retrieved from online databases by using keywords, (e.g., 'shell beads'; 'pierced shells'; 'drilling predators'); 79 of these publications enabled us to conduct a systematic review to qualitatively assess the location of the holes in the shells described in the published articles. In turn, 54 publications were used to assess the location of the holes in the shells made by non-human predators. Almost all archaeological sites described shells with holes in a variety of anatomical locations. High variation of hole-placement was found within the same species from the same site, as well as among sites. These results contrast with research on predatory molluscs, which tend to be more specific in where they attacked their prey. Gastropod and bivalve predators choose similar hole locations to humans. Based on figures in the analysed articles, variation in hole-location on pierced shells from archaeological sites was similar to variation in the placement of holes created by non-human animals. Importantly, we found that some predators choose similar hole locations to

Prevalence of contact allergy to metals in the European general population with a focus on nickel sulfate and piercings: The EDEN Fragrance Study.

Science.gov (United States)

Schuttelaar, Marie L A; Ofenloch, Robert F; Bruze, Magnus; Cazzaniga, Simone; Elsner, Peter; Gonçalo, Margarida; Naldi, Luigi; Svensson, Åke; Diepgen, Thomas L

2018-04-10

Studies on sensitization to metals in the general population are scarce. To determine the prevalence of sensitization to metals in the general population, and factors associated with nickel sensitization. In 5 European countries (The Netherlands, Germany, Italy, Portugal and Sweden), a random sample (N = 3119) from the general population (aged 18-74 years) was patch tested and interviewed by use of a questionnaire on exposure to metals, piercing, and jewellery. Overall, the age-standardized prevalences of sensitization to nickel, cobalt and chromium were, respectively, 14.5%, 2.1%, and 0.8%. The highest prevalence of nickel sensitization was seen in Portugal (18.5%) and the lowest (8.3%) in Sweden. The prevalence of cobalt sensitization varied between 3.8% (The Netherlands) and 0.9% (Italy), and the prevalence of chromium sensitization varied between 1.3% (Portugal) and 0.2% (Sweden). Significant associations were observed between nickel allergy and female sex (odds ratio [OR] 5.19; 95% confidence interval [95%CI]: 3.99-6.74), past piercing use (OR 3.86; 95%CI: 2.85-5.24), and currently having ≥3 piercings (OR 5.58; 95%CI: 4.02-7.76). The prevalence of sensitization to metals in the European general population was high, mostly because of nickel. The lowest prevalence of contact allergy to nickel and chromium observed in Sweden supports the effectiveness of long-standing regulation. © 2018 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

Dr Jerome Pierce Webster (1888-1974): Surgeon, historian, campaigner, and 'the father of plastic surgery education'.

Science.gov (United States)

Wigley, Catrin H

2016-09-28

Dr Jerome Pierce Webster is best remembered as the 'founder of plastic surgery education in the United States' on the basis of developing his nation's first plastic surgery residency programme, his role in the founding of the American Board of Plastic Surgery, and, more generally, his influence in professionalising this subspecialty. He also deserves to be remembered for his extensive missionary work in China, his publications as a successful bibliographer, and as an accomplished historian. © The Author(s) 2016.

A Reassessment of George Pierce Baker's "The Principles of Argumentation": Minimizing the Use of Formal Logic in Favor of Practical Approaches

Science.gov (United States)

Bordelon, Suzanne

2006-01-01

In this article, the author demonstrated how recent histories relied primarily on previous accounts and one textbook to characterize George Pierce Baker's work. This narrow assessment of "The Principles of Argumentation" limits one's understanding of his contribution to argumentation theory and pedagogy. Similarly, one has seen the need for care…

Tatuagens, Piercings e Diversidade Cultural: o que gestores dizem sobre esse tema?

Directory of Open Access Journals (Sweden)

Flávia Lorenne Sampaio Barbosa

2016-12-01

Full Text Available A diversidade cultural, representada pela utilização de tatuagens e piercings, possui variados impactos nos fenômenos sociais. No âmbito organizacional, sua gestão propicia potencialidades, especialmente como oportunidade para harmonizar ambientes corporativos e agregar valor competitivo. A pesquisa investiga a percepção sobre a empregabilidade de pessoas adeptas à tatuagens e piercings no contexto da gestão da diversidade cultural. Realizou-se pesquisa de campo com 8 empresários de uma cidade do interior do estado do Piauí, por meio de entrevistas semiestruturadas, analisadas com suporte na análise de conteúdo, especificamente, análise relacional. Com auxílio do software Atlas ti, categorizou-se as entrevistas em torno da gestão da diversidade cultural e duas subcategorias: cultura organizacional, formada pela dimensão valores sobre a diversidade e relações interpessoais; e resultados, formada pelas dimensões imagem e objetivos organizacionais. Constata-se que nas empresas do estudo não há gestão da diversidade, haja vista que os valores pessoais e organizacionais ainda não incorporaram valores culturais da diversidade. Em relação à empregabilidade, os objetivos institucionais refletidos nas políticas de gestão de pessoas, condicionam as competências, habilidades e atitudes profissionais ao atendimento de normas prescritas, reduzindo as possibilidades de gestão do potencial da diversidade na organização, em função do recrutamento e seleção de um perfil ideal. Acredita-se que pesquisas em outras contextos, inclusive de natureza comparativa, pode agregar novos pontos de vista e ampliar a discussão da gestão da diversidade no âmbito de sua afirmação como prática capaz de transformar organizações em espaços de maior acolhimento e mais competitivos

Recent Results from Analysis of Flow Structures and Energy Modes Induced by Viscous Wave around a Surface-Piercing Cylinder

Directory of Open Access Journals (Sweden)

Giancarlo Alfonsi

2017-01-01

Full Text Available Due to its relevance in ocean engineering, the subject of the flow field generated by water waves around a vertical circular cylinder piercing the free surface has recently started to be considered by several research groups. In particular, we studied this problem starting from the velocity-potential framework, then the implementation of the numerical solution of the Euler equations in their velocity-pressure formulation, and finally the performance of the integration of the Navier-Stokes equations in primitive variables. We also developed and applied methods of extraction of the flow coherent structures and most energetic modes. In this work, we present some new results of our research directed, in particular, toward the clarification of the main nonintuitive character of the phenomenon of interaction between a wave and a surface-piercing cylinder, namely, the fact that the wave exerts its maximum force and exhibits its maximum run-up on the cylindrical obstacle at different instants. The understanding of this phenomenon becomes of crucial importance in the perspective of governing the entity of the wave run-up on the obstacle by means of wave-flow-control techniques.

From body piercing to acute kidney injury – a case report

Directory of Open Access Journals (Sweden)

Irena Wikiera-Magott

2017-12-01

Full Text Available Acute kidney injury is an abrupt decline of renal function interfering with the body’s homeostasis. It most commonly occurs in neonates and children treated in intensive care units and undergoing extensive surgical procedures, especially cardiac surgery. Its aetiology is frequently complex, with infectious factors, toxic chemical activity and hydration and electrolyte imbalance occurring simultaneously and aggravating kidney injury. This study reports a case of a 17-year-old female patient in whom acute kidney injury was caused by a combination of factors, including sepsis, adverse effects of analgesic drugs and dehydration. Staphylococcus aureus infection caused by multiple-site piercings performed in a home setting resulted in the development of multiple skin abscesses, myometrial abscesses and a generalised infection. The patient’s condition warranted intensive antibiotic therapy and drainage of the myometrial abscesses. The therapy facilitated eradication of the infection foci and normalising renal function.

Educational Objectives and the Learning Domains: A New Formulation [And] Summary: Pierce-Gray Classification Model for the Cognitive, Affective and Psychomotor Domains.

Science.gov (United States)

Gray, Charles E.; Pierce, Walter D.

This paper examines and summarizes the "Pierce-Gray Classification Model for the Cognitive, Affective, and Psychomotor Domains," a model developed for the classification of educational objectives. The classification system was developed to provide a framework that teachers could use as a guide when developing specific instructional objectives for…

Simultaneous Detection of Escherichia coli O157:H7, Salmonella enteritidis, and Listeria monocytogenes at a Very Low Level Using Simultaneous Enrichment Broth and Multichannel SPR Biosensor.

Science.gov (United States)

Zhang, Xiaoguang; Tsuji, Sachiko; Kitaoka, Hayato; Kobayashi, Hiroshi; Tamai, Mitsuru; Honjoh, Ken-Ichi; Miyamoto, Takahisa

2017-10-01

Detection of foodborne pathogens at very low levels is still a challenge. A custom-built multichannel surface plasmon resonance (SPR) biosensor and simultaneous enrichment broth (SEB) were used to develop a simultaneous detection method for 3 important foodborne pathogens, Escherichia coli O157:H7 (O157:H7), Salmonella enteritidis, and Listeria monocytogenes, at a very low level. These 3 foodborne pathogens at a very low level (14, 6, and 28 CFU/25 g (mL) for O157:H7, S. enteritidis, and L. monocytogenes, respectively) were inoculated in SEB and incubated at 37 ˚C for 24 h. Sample prepared from the simultaneous enrichment culture was analyzed using the multichannel SPR biosensor and sensor chip immobilized with polyclonal antibodies specific to each of the target pathogens. O157:H7, S. enteritidis, and L. monocytogenes in chicken were detected simultaneously at an inoculum dose of 14, 6, and 28 CFU/25 g, respectively. Our method using a custom-built multichannel SPR biosensor and enrichment in SEB is expected as a rapid and simultaneous detection method for low levels of O157:H7, S. enteritidis, and L. monocytogenes in food. Our method is expected as a rapid and simultaneous detection method for pathogens at very low levels. It has great potential for safety control of food and microbiological detection applications. © 2017 Institute of Food Technologists®.

The coming of age of self-mutilation.

Science.gov (United States)

Favazza, A R

1998-05-01

Self-mutilation (SM), the deliberate, nonsuicidal destruction of one's own body tissue, occurs in such culturally sanctioned practices as tattooing; body piercing; and healing, spiritual, and order-preserving rituals. As a symptom, it has typically been regarded as a manifestation of borderline behavior and misidentified as a suicide attempt. It has begun to attract mainstream media attention, and many more who suffer from it are expected to seek treatment. This review suggests that SM can best be understood as a morbid self-help effort providing rapid but temporary relief from feelings of depersonalization, guilt, rejection, and boredom as well as hallucinations, sexual preoccupations, and chaotic thoughts. Major SM includes infrequent acts such as eye enucleation and castration, commonly associated with psychosis and intoxication. Stereotypic SM includes such acts as head banging and self-biting most often accompanying Tourette's syndrome and severe mental retardation. Superficial/moderate SM includes compulsive acts such as trichotillomania and skin picking and such episodic acts as skin-cutting and burning, which evolve into an axis I syndrome of repetitive impulse dyscontrol with protean symptoms.

Investigation of SnSPR1, a novel and abundant surface protein of Sarcocystis neurona merozoites.

Science.gov (United States)

Zhang, Deqing; Howe, Daniel K

2008-04-15

An expressed sequence tag (EST) sequencing project has produced over 15,000 partial cDNA sequences from the equine pathogen Sarcocystis neurona. While many of the sequences are clear homologues of previously characterized genes, a significant number of the S. neurona ESTs do not exhibit similarity to anything in the extensive sequence databases that have been generated. In an effort to characterize parasite proteins that are novel to S. neurona, a seemingly unique gene was selected for further investigation based on its abundant representation in the collection of ESTs and the predicted presence of a signal peptide and glycolipid anchor addition on the encoded protein. The gene was expressed in E. coli, and monospecific polyclonal antiserum against the recombinant protein was produced by immunization of a rabbit. Characterization of the native protein in S. neurona merozoites and schizonts revealed that it is a low molecular weight surface protein that is expressed throughout intracellular development of the parasite. The protein was designated Surface Protein 1 (SPR1) to reflect its display on the outer surface of merozoites and to distinguish it from the ubiquitous SAG/SRS surface antigens of the heteroxenous Coccidia. Interestingly, infection assays in the presence of the polyclonal antiserum suggested that SnSPR1 plays some role in attachment and/or invasion of host cells by S. neurona merozoites. The work described herein represents a general template for selecting and characterizing the various unidentified gene sequences that are plentiful in the EST databases for S. neurona and other apicomplexans. Furthermore, this study illustrates the value of investigating these novel sequences since it can offer new candidates for diagnostic or vaccine development while also providing greater insight into the biology of these parasites.

Modification of the pierce instability of the electron flow in a diode with an external electromagnetic action

International Nuclear Information System (INIS)

Melezhik, O.G.; Pashchenko, A.V.; Romanov, S.S.; Shapoval, I.M.

2014-01-01

The stability of electron flow passage through the diode with a neutralized space charge has been investigated on the basis of the first-order approximation for hydrodynamic and Maxwell equations. Classification of solutions to the equations was developed in accordance with the magnitude and nature (potential or eddy) of the electric field arising at the diode cathode. The stability regions for these states have been found. It is shown that the presence of external electromagnetic action makes the stability region narrower than that predicted by Pierce.

Observations on vapor pressure in SPR caverns : sources.

Energy Technology Data Exchange (ETDEWEB)

Munson, Darrell Eugene

2010-05-01

The oil of the Strategic Petroleum Reserve (SPR) represents a national response to any potential emergency or intentional restriction of crude oil supply to this country, and conforms to International Agreements to maintain such a reserve. As assurance this reserve oil will be available in a timely manner should a restriction in supply occur, the oil of the reserve must meet certain transportation criteria. The transportation criteria require that the oil does not evolve dangerous gas, either explosive or toxic, while in the process of transport to, or storage at, the destination facility. This requirement can be a challenge because the stored oil can acquire dissolved gases while in the SPR. There have been a series of reports analyzing in exceptional detail the reasons for the increases, or regains, in gas content; however, there remains some uncertainty in these explanations and an inability to predict why the regains occur. Where the regains are prohibitive and exceed the criteria, the oil must undergo degasification, where excess portions of the volatile gas are removed. There are only two known sources of gas regain, one is the salt dome formation itself which may contain gas inclusions from which gas can be released during oil processing or storage, and the second is increases of the gases release by the volatile components of the crude oil itself during storage, especially if the stored oil undergoes heating or is subject to biological generation processes. In this work, the earlier analyses are reexamined and significant alterations in conclusions are proposed. The alterations are based on how the fluid exchanges of brine and oil uptake gas released from domal salt during solutioning, and thereafter, during further exchanges of fluids. Transparency of the brine/oil interface and the transfer of gas across this interface remains an important unanswered question. The contribution from creep induced damage releasing gas from the salt surrounding the cavern is

Protein-Flavonoid Interaction Studies by a Taylor Dispersion Surface Plasmon Resonance (SPR Technique: A Novel Method to Assess Biomolecular Interactions

Directory of Open Access Journals (Sweden)

Preejith P. Vachali

2016-02-01

Full Text Available Flavonoids are common polyphenolic compounds widely distributed in fruits and vegetables. These pigments have important pharmacological relevance because emerging research suggests possible anti-cancer and anti-inflammatory properties as well other beneficial health effects. These compounds are relatively hydrophobic molecules, suggesting the role of blood transport proteins in their delivery to tissues. In this study, we assess the binding interactions of four flavonoids (kaempferol, luteolin, quercetin, and resveratrol with human serum albumin (HSA, the most abundant protein in the blood, and with glutathione S-transferase pi isoform-1 (GSTP1, an enzyme with well-characterized hydrophobic binding sites that plays an important role in detoxification of xenobiotics with reduced glutathione, using a novel Taylor dispersion surface plasmon resonance (SPR technique. For the first time, HSA sites revealed a high-affinity binding site for flavonoid interactions. Out of the four flavonoids that we examined, quercetin and kaempferol showed the strongest equilibrium binding affinities (KD of 63 ± 0.03 nM and 37 ± 0.07 nM, respectively. GSTP1 displayed lower affinities in the micromolar range towards all of the flavonoids tested. The interactions of flavonoids with HSA and GSTP1 were studied successfully using this novel SPR assay method. The new method is compatible with both kinetic and equilibrium analyses.

Facility management - efektivní správa stavebních objektů

OpenAIRE

Helekalová, Denisa

2013-01-01

Diplomová práce „ Facility management – efektivní správa stavebních objektů“ je zaměřena na stavební objekty a přínos pro ně při využívání služeb facility managementu. Práce se snaží přiblížit, co je facility management kdo ho poskytuje v České republice a jak přispívá k úsporám. Zmíněny jsou také informační technologie využívané ve facility managementu, protože bez těch se v dnešní době téměř žádný obor neobejde. První část je též zaměřena na stavbu, její životní cyklus a náklady s ním spoje...

Hydrographs showing groundwater levels for selected wells in the Puyallup River watershed and vicinity, Pierce and King Counties, Washington

Science.gov (United States)

Lane, R.C.; Julich, R.J.; Justin, G.B.

2013-01-01

Hydrographs of groundwater levels for selected wells in and adjacent to the Puyallup River watershed in Pierce and King Counties, Washington, are presented using an interactive Web-based map of the study area to illustrate changes in groundwater levels on a monthly and seasonal basis. The interactive map displays well locations that link to the hydrographs, which in turn link to the U.S. Geological Survey National Water Information System, Groundwater Site Inventory System.

Strategic Petroleum Reserve (SPR) additional geologic site characterization studies, Bryan Mound Salt Dome, Texas

Energy Technology Data Exchange (ETDEWEB)

Neal, J.T. [Sandia National Labs., Albuquerque, NM (United States); Magorian, T.R.; Ahmad, S. [Acres International Corp., Amherst, NY (United States)

1994-11-01

This report revises the original report that was published in 1980. Some of the topics covered in the earlier report were provisional and it is now practicable to reexamine them using new or revised geotechnical data and that obtained from SPR cavern operations, which involves 16 new caverns. Revised structure maps and sections show interpretative differences as compared with the 1980 report and more definition in the dome shape and caprock structural contours, especially a major southeast-northwest trending anomalous zone. The original interpretation was of westward tilt of the dome, this revision shows a tilt to the southeast, consistent with other gravity and seismic data. This interpretation refines the evaluation of additional cavern space, by adding more salt buffer and allowing several more caverns. Additional storage space is constrained on this nearly full dome because of low-lying peripheral wetlands, but 60 MMBBL or more of additional volume could be gained in six or more new caverns. Subsidence values at Bryan Mound are among the lowest in the SPR system, averaging about 11 mm/yr (0.4 in/yr), but measurement and interpretation issues persist, as observed values are about the same as survey measurement accuracy. Periodic flooding is a continuing threat because of the coastal proximity and because peripheral portions of the site are at elevations less than 15 ft. This threat may increase slightly as future subsidence lowers the surface, but the amount is apt to be small. Caprock integrity may be affected by structural features, especially the faulting associated with anomalous zones. Injection wells have not been used extensively at Bryan Mound, but could be a practicable solution to future brine disposal needs. Environmental issues center on the areas of low elevation that are below 15 feet above mean sea level: the coastal proximity and lowland environment combined with the potential for flooding create conditions that require continuing surveillance.

Use of surface plasmon resonance (SPR) to study the dissociation and polysaccharide binding of casein micelles and caseins.

Science.gov (United States)

Thompson, Abby K; Singh, Harjinder; Dalgleish, Douglas G

2010-11-24

Tests were made to determine whether surface plasmon resonance (SPR) could be used as a technique to study the dissociation properties of bovine casein micelles or of sodium caseinate and the interactions between these protein particles and different polysaccharides. Surfaces of bound micelles or caseinate were made, and the changes in refractive index of these layers were used to define changes in the structures of the chemisorbed material. The technique appears to have some potential for studying details of the dissociation of casein micelles and of the binding of different polysaccharides to caseins.

Pierce-Wiggler electron beam system for 250 GHz GYRO-BWO: Final report

International Nuclear Information System (INIS)

Pirkle, D.R.; Alford, C.W.; Anderson, M.H.; Garcia, R.F.; Legarra, J.R.; Nordquist, A.L.

1989-01-01

This final report summarizes the design and performance of the VUW-8028 Pierce-Wiggler electron beam systems, which can be used to power high frequency gyro-BWO's. The operator's manual for this gyro-BWO beamstick is included as appendix A. Researchers at Lawrence Livermore National Laboratory (LLNL) are developing a gyro-BWO with a center frequency of 250 GHz, 6% bandwidth, and 10 kV peak output power. The gyro-BWO will be used to drive a free electron laser amplifier at LLNL. The electron beam requirements of the gyro-BWO application are: Small beam size, .100 inch at 2500 gauss axial magnetic field; a large fraction of the electron energy in rotational velocity; ability to vary the electrons' axial velocity easily, for electronic tuning; and low velocity spread i.e. little variation in the axial velocities of the electrons in the interaction region. 1 ref., 13 figs

Bacteria, taxonomic code, and other data collected from G.W. PIERCE in North Atlantic Ocean from sediment sampler; 20 February 1976 to 23 March 1976 (NODC Accession 7601642)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Bacteria, taxonomic code, and other data were collected using sediment sampler and other instruments in the North Atlantic Ocean from G.W. PIERCE. Data were...

Altered States of Consciousness during an Extreme Ritual

Science.gov (United States)

Loewald, Tonio; Comber, Evelyn M.; Hanson, Sarah A.; Pruitt, Bria

2016-01-01

Extreme rituals (body-piercing, fire-walking, etc.) are anecdotally associated with altered states of consciousness—subjective alterations of ordinary mental functioning (Ward, 1984)—but empirical evidence of altered states using both direct and indirect measures during extreme rituals in naturalistic settings is limited. Participants in the “Dance of Souls”, a 3.5-hour event during which participants received temporary piercings with hooks or weights attached to the piercings and danced to music provided by drummers, responded to measures of two altered states of consciousness. Participants also completed measures of positive and negative affect, salivary cortisol (a hormone associated with stress), self-reported stress, sexual arousal, and intimacy. Both pierced participants (pierced dancers) and non-pierced participants (piercers, piercing assistants, observers, drummers, and event leaders) showed evidence of altered states aligned with transient hypofrontality (Dietrich, 2003; measured with a Stroop test) and flow (Csikszentmihalyi, 1990; Csikszentmihalyi & Csikszentmihalyi, 1990; measured with the Flow State Scale). Both pierced and non-pierced participants also reported decreases in negative affect and psychological stress and increases in intimacy from before to after the ritual. Pierced and non-pierced participants showed different physiological reactions, however, with pierced participants showing increases in cortisol and non-pierced participants showing decreases from before to during the ritual. Overall, the ritual appeared to induce different physiological effects but similar psychological effects in focal ritual participants (i.e., pierced dancers) and in participants adopting other roles. PMID:27175897

Altered States of Consciousness during an Extreme Ritual.

Directory of Open Access Journals (Sweden)

Ellen M Lee

Full Text Available Extreme rituals (body-piercing, fire-walking, etc. are anecdotally associated with altered states of consciousness-subjective alterations of ordinary mental functioning (Ward, 1984-but empirical evidence of altered states using both direct and indirect measures during extreme rituals in naturalistic settings is limited. Participants in the "Dance of Souls", a 3.5-hour event during which participants received temporary piercings with hooks or weights attached to the piercings and danced to music provided by drummers, responded to measures of two altered states of consciousness. Participants also completed measures of positive and negative affect, salivary cortisol (a hormone associated with stress, self-reported stress, sexual arousal, and intimacy. Both pierced participants (pierced dancers and non-pierced participants (piercers, piercing assistants, observers, drummers, and event leaders showed evidence of altered states aligned with transient hypofrontality (Dietrich, 2003; measured with a Stroop test and flow (Csikszentmihalyi, 1990; Csikszentmihalyi & Csikszentmihalyi, 1990; measured with the Flow State Scale. Both pierced and non-pierced participants also reported decreases in negative affect and psychological stress and increases in intimacy from before to after the ritual. Pierced and non-pierced participants showed different physiological reactions, however, with pierced participants showing increases in cortisol and non-pierced participants showing decreases from before to during the ritual. Overall, the ritual appeared to induce different physiological effects but similar psychological effects in focal ritual participants (i.e., pierced dancers and in participants adopting other roles.

Design and analysis of surface plasmon resonance (SPR) sensor to check the quality of food from adulteration

Science.gov (United States)

Kumar, Manish; Raghuwanshi, Sanjeev Kumar

2018-02-01

In recent years, food safety issues caused by contamination of chemical substances or microbial species have raised a major area of concern to mankind. The conventional chromatography-based methods for detection of chemical are based on human-observation and slow for real-time monitoring. The surface plasmon resonance (SPR) sensors offers the capability of detection of very low concentrations of adulterated chemical and biological agents for real-time by monitoring. Thus, adulterant agent in food gives change in refractive index of pure food result in corresponding phase change. These changes can be detected at the output and can be related to the concentration of the chemical species present at the point.

Self-optimized metal coatings for fiber plasmonics by electroless deposition.

Science.gov (United States)

Bialiayeu, A; Caucheteur, C; Ahamad, N; Ianoul, A; Albert, J

2011-09-26

We present a novel method to prepare optimized metal coatings for infrared Surface Plasmon Resonance (SPR) sensors by electroless plating. We show that Tilted Fiber Bragg grating sensors can be used to monitor in real-time the growth of gold nano-films up to 70 nm in thickness and to stop the deposition of the gold at a thickness that maximizes the SPR (near 55 nm for sensors operating in the near infrared at wavelengths around 1550 nm). The deposited films are highly uniform around the fiber circumference and in spite of some nanoscale roughness (RMS surface roughness of 5.17 nm) the underlying gratings show high quality SPR responses in water. © 2011 Optical Society of America

A variation of Musculocutaneous nerve without piercing the coracobrachialis muscle while communicating to the median nerve: A case report and literature review

Directory of Open Access Journals (Sweden)

Hamid Tayefi Nasrabadi

Full Text Available Introduction: Anatomical variations of the peripheral nervous system may have not any clinical signs and symptoms. One of these variations belongs to the Musculocutaneous nerve. However, a good knowledge of nerve pathways and their variations is very important for surgeons in post-traumatic evaluations, exploratory interventions, and/or administration of neuromuscular blocks in axillary region in order to surgical therapies. Presentation of case: This report describes a case of variation of the musculocutaneous nerve which was observed in an old Iranian male cadaver during routine educational dissection (Fig. 1. Discussion and Conclusion: Anatomically, in the axilla region, the Musculocutaneous nerve is originated of the lateral cord of brachial plexus, then, by piercing the coracobrachialis muscle arrives enters to anterior compartment of the arm. But, in the present report, we observed that the Musculocutaneous nerve without piercing the coracobrachialis muscle has arrived in the left arm, then communicated to the Median nerve. To exploratory interventions of the arms for peripheral nerve repair and surgical therapies, a good knowledge of nerve pathways helps to surgeons for preventing possible mistakes during surgery. Keywords: Brachial plexus, Musculocutaneous nerve, Median nerve, Variation, Anatomy, Dissection

A multi-feature integration method for fatigue crack detection and crack length estimation in riveted lap joints using Lamb waves

Science.gov (United States)

He, Jingjing; Guan, Xuefei; Peng, Tishun; Liu, Yongming; Saxena, Abhinav; Celaya, Jose; Goebel, Kai

2013-10-01

This paper presents an experimental study of damage detection and quantification in riveted lap joints. Embedded lead zirconate titanate piezoelectric (PZT) ceramic wafer-type sensors are employed to perform in situ non-destructive evaluation (NDE) during fatigue cyclical loading. PZT wafers are used to monitor the wave reflection from the boundaries of the fatigue crack at the edge of bolt joints. The group velocity of the guided wave is calculated to select a proper time window in which the received signal contains the damage information. It is found that the fatigue crack lengths are correlated with three main features of the signal, i.e., correlation coefficient, amplitude change, and phase change. It was also observed that a single feature cannot be used to quantify the damage among different specimens since a considerable variability was observed in the response from different specimens. A multi-feature integration method based on a second-order multivariate regression analysis is proposed for the prediction of fatigue crack lengths using sensor measurements. The model parameters are obtained using training datasets from five specimens. The effectiveness of the proposed methodology is demonstrated using several lap joint specimens from different manufactures and under different loading conditions.

A multi-feature integration method for fatigue crack detection and crack length estimation in riveted lap joints using Lamb waves

International Nuclear Information System (INIS)

He, Jingjing; Guan, Xuefei; Peng, Tishun; Liu, Yongming; Saxena, Abhinav; Celaya, Jose; Goebel, Kai

2013-01-01

This paper presents an experimental study of damage detection and quantification in riveted lap joints. Embedded lead zirconate titanate piezoelectric (PZT) ceramic wafer-type sensors are employed to perform in situ non-destructive evaluation (NDE) during fatigue cyclical loading. PZT wafers are used to monitor the wave reflection from the boundaries of the fatigue crack at the edge of bolt joints. The group velocity of the guided wave is calculated to select a proper time window in which the received signal contains the damage information. It is found that the fatigue crack lengths are correlated with three main features of the signal, i.e., correlation coefficient, amplitude change, and phase change. It was also observed that a single feature cannot be used to quantify the damage among different specimens since a considerable variability was observed in the response from different specimens. A multi-feature integration method based on a second-order multivariate regression analysis is proposed for the prediction of fatigue crack lengths using sensor measurements. The model parameters are obtained using training datasets from five specimens. The effectiveness of the proposed methodology is demonstrated using several lap joint specimens from different manufactures and under different loading conditions. (paper)

Design of convergent pierce electron gun of accelerator for radiation sterilization by the method of synthesis

International Nuclear Information System (INIS)

Kong Xiaoxiao; Li Quanfeng

2003-01-01

A synthesis technique for the preliminary design of convergent Pierce electron guns is introduced briefly which has a series of advantages over the traditional methods. A thermal cathode electron gun used in the accelerator for radiation sterilization with the synthesis method is redesigned, and the validity of this method is proved. Based on the preliminary design parameters given by the synthesis method, a simulating calculation program, EGUN, was used in the numerical figure design of the focusing electrode and the anode. The final results can meet the engineering requirement as the current being 1A, the normalized emittance being less than 4 mm·mrad, and the final current density showing uniformity

Self-other resonance, its control and prosocial inclinations: Brain-behavior relationships.

Science.gov (United States)

Christov-Moore, Leonardo; Iacoboni, Marco

2016-04-01

Humans seem to place a positive reward value on prosocial behavior. Evidence suggests that this prosocial inclination is driven by our reflexive tendency to share in the observed sensations, emotions and behavior of others, or "self-other resonance". In this study, we examine how neural correlates of self-other resonance relate to prosocial decision-making. Subjects performed two tasks while undergoing fMRI: observation of a human hand pierced by a needle, and observation and imitation of emotional facial expressions. Outside the scanner, subjects played the Dictator Game with players of low or high income (represented by neutral-expression headshots). Subjects' offers in the Dictator Game were correlated with activity in neural systems associated with self-other resonance and anticorrelated with activity in systems implicated in the control of pain, affect, and imitation. Functional connectivity between areas involved in self-other resonance and top-down control was negatively correlated with subjects' offers. This study suggests that the interaction between self-other resonance and top-down control processes are an important component of prosocial inclinations towards others, even when biological stimuli associated with self-other resonance are limited. These findings support a view of prosocial decision-making grounded in embodied cognition. © 2016 Wiley Periodicals, Inc.

Disarming Microaggressions: How Black College Students Self-Regulate Racial Stressors within Predominately White Institutions

Science.gov (United States)

Watkins, Nicole L.

2012-01-01

The nature of racism in the United States has transformed from overt prejudice and blatant discrimination to more covert, embedded, ambiguous manifestations called racial microaggressions (Constantine, 2007; Pierce, Carew, Pierce-Gonzalez, & Willis, 1978; Sue, Capidolupo et al., 2007). Researchers have demonstrated the unique, harmful, and…

Kinetic analysis of inhibition of glucoamylase and active site mutants via chemoselective oxime immobilization of acarbose on SPR chip surfaces

DEFF Research Database (Denmark)

Sauer, Jørgen; Abou Hachem, Maher; Svensson, Birte

2013-01-01

shown that at pH 7.0 the association and dissociation rate constants for the acarbose-glucoamylase interaction are 104M−1s−1 and 103s−1, respectively, and that the conformational change to a tight enzyme–inhibitor complex affects the dissociation rate constant by a factor of 102s−1. Additionally......, the acarbose-presenting SPR surfaces could be used as a glucoamylase sensor that allowed rapid, label-free affinity screening of small carbohydrate-based inhibitors in solution, which is otherwise difficult with immobilized enzymes or other proteins....

Simulations of the DARPA Suboff Submarine Including Self-Propulsion with the E1619 Propeller

Science.gov (United States)

2012-01-01

Young and Kinnas (2003) to evaluate supercavitating and surface-piercing propellers. The simulation’s predicted results compare well with experimental...Young Y, Kinnas S. 2003. Analysis of supercavitating and surface-piercing propeller flows via BEM. Comput. Mech. 32, 269-280. Yu-cun P, Huai-xin Z

Men are innocent until proven guilty: a comment on the examination of sex differences by Pierce and Kirkpatrick (1992).

Science.gov (United States)

Pickersgill, M J; Arrindell, W A

1994-01-01

Pierce and Kirkpatrick (1992, Behaviour Research and Therapy, 30, 415-418) addressed the finding that men reported lower levels of fear than women in response to specific fear items and concluded on the basis of their experiment that this was because the men were lying. Their conclusion is questioned on various grounds, including inappropriate statistical analyses, inadequate treatment of physiological data, failure to address the possibility of sample selection bias (signalled by the high drop-out rate) and the inadequacy of self-assessed fear measures based on a small number of single items. An alternative interpretation of their data is offered, based on the inverse correlation between initial response level and size of increment, demonstrable in their study in males but not in females. It is argued here that the increments may have been due to anticipatory arousal, a mediating factor that would also account for the facilitation of generalization between certain specific items. It is further suggested that, if this explanation is correct, the men were acting with more rather than less honesty, and it may on the other hand be the reports of the females that were affected by their sex-role stereotype. Another possible explanation of the findings is discussed. If men relatively high in masculinity had a greater tendency to drop out, the experimental sample at the second testing would be biased towards men relatively low in masculinity and reporting higher fear levels.

A new approach using the Pierce two-node model for different body parts.

Science.gov (United States)

Foda, Ehab; Sirén, Kai

2011-07-01

This paper presents a new approach, in applying the Pierce two-node model, to predict local skin temperatures of individual body parts with good accuracy. In this study, local skin temperature measurements at 24 sites on the bodies of 11 human subjects were carried out in a controlled environment under three different indoor conditions (i.e. neutral, warm and cold). The neutral condition measurements were used to adjust the local skin set-points in the model for each body part. Additional modifications to the calculation algorithm were introduced corresponding to different body parts. The local core set-points were then calculated, using a line search method, as the input values that allow the model to predict the skin temperatures with maximum deviation of ±0.1°C for the neutral condition. The model predictability was verified for the other two indoor conditions, and the results show that the modified model predicts local skin temperatures with average deviation of ±0.3°C.

Experimental study on combined cold forging process of backward cup extrusion and piercing

Science.gov (United States)

Henry, Robinson; Liewald, Mathias

2018-05-01

A reduction in material usage of cold forged components while maintaining the functional requirements can be achieved using hollow or tubular preforms. These preforms are used to meet lightweight requirements and to decrease production costs of cold formed components. To increase production efficiency in common multi-stage cold forming processes, manufacturing of hollow preforms by combining the processes backward cup extrusion and piercing was established and will be discussed in this paper. Corresponding investigations and experimental studies are reported in this article. The objectives of the experimental investigations have been the detection of significant process parameters, determination of process limits for the combined processes and validation of the numerical investigations. In addition, the general influence concerning surface quality and diameter tolerance of hollow performs are discussed in this paper. The final goal is to summarize a guideline for industrial application, moreover, to transfer the knowledge to industry, as regards what are required part geometries to reduce the number of forming stages as well as tool cost.

Simulation of the Groundwater-Flow System in Pierce, Polk, and St. Croix Counties, Wisconsin

Science.gov (United States)

Juckem, Paul F.

2009-01-01

Groundwater is the sole source of residential water supply in Pierce, Polk, and St. Croix Counties, Wisconsin. A regional three-dimensional groundwater-flow model and three associated demonstration inset models were developed to simulate the groundwater-flow systems in the three-county area. The models were developed by the U.S. Geological Survey in cooperation with the three county governments. The objectives of the regional model of Pierce, Polk, and St. Croix Counties were to improve understanding of the groundwaterflow system and to develop a tool suitable for evaluating the effects of potential water-management programs. The regional groundwater-flow model described in this report simulates the major hydrogeologic features of the modeled area, including bedrock and surficial aquifers, groundwater/surface-water interactions, and groundwater withdrawals from high-capacity wells. Results from the regional model indicate that about 82 percent of groundwater in the three counties is from recharge within the counties; 15 percent is from surface-water sources, consisting primarily of recirculated groundwater seepage in areas with abrupt surface-water-level changes, such as near waterfalls, dams, and the downgradient side of reservoirs and lakes; and 4 percent is from inflow across the county boundaries. Groundwater flow out of the counties is to streams (85 percent), outflow across county boundaries (14 percent), and pumping wells (1 percent). These results demonstrate that the primary source of groundwater withdrawn by pumping wells is water that recharges within the counties and would otherwise discharge to local streams and lakes. Under current conditions, the St. Croix and Mississippi Rivers are groundwater discharge locations (gaining reaches) and appear to function as 'fully penetrating' hydraulic boundaries such that groundwater does not cross between Wisconsin and Minnesota beneath them. Being hydraulic boundaries, however, they can change in response to

Ballistic Limit of High-Strength Steel and Al7075-T6 Multi-Layered Plates Under 7.62-mm Armour Piercing Projectile Impact

OpenAIRE

Rahman, N. A.; Abdullah, S.; Zamri, W. F. H.; Abdullah, M. F.; Omar, M. Z.; Sajuri, Z.

2016-01-01

Abstract This paper presents the computational-based ballistic limit of laminated metal panels comprised of high strength steel and aluminium alloy Al7075-T6 plate at different thickness combinations to necessitate the weight reduction of existing armour steel plate. The numerical models of monolithic configuration, double-layered configuration and triple-layered configuration were developed using a commercial explicit finite element code and were impacted by 7.62 mm armour piercing projectil...

HAHA--nothing to laugh about. Measuring the immunogenicity (human anti-human antibody response) induced by humanized monoclonal antibodies applying ELISA and SPR technology.

Science.gov (United States)

Nechansky, Andreas

2010-01-05

Immunogenicity induced by passively applied proteins is a serious issue because it is directly related to the patient's safety. The out-come of an immune reaction to a therapeutic protein can range from transient appearance of antibodies without any clinical significance to severe life threatening conditions. Within this article, enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance (SPR) methodology to measure immunogenicity are compared and the pros and cons are discussed.

Application of neutron activation analysis to the corrosion study of gold coated studs used for piercing ears

International Nuclear Information System (INIS)

Saiki, M.; Rogero, S.O.; Costa, I.; Correa, O.V.; Higa, O.Z.

1998-01-01

Complete text of publication follows. Gold is known as a metal having little or no toxicity and it has been widely used for coating studs for ear piercing. However, for some people gold coated studs have caused serious allergy and inflammation problems. After piercing, the studs are usually kept in the ear lobes for at least one week, and during this period the stud surfaces in contact with the body fluids have caused swelling, pain and redness of the skin. Consequently, it is of great interest to evaluate if elements from the metallic substrate underneath the gold coatings migrate to the body fluids due to the corrosion and the presence of defects in gold coatings. The solutions for corrosion test were obtained by placing the gold coated studs in contact with the solutions of NaCl and of culture medium. Elemental analyses of these solutions by radioanalytical method of neutron activation analysis indicated the occurrence of substrate corrosion since the elements Cr, Fe, Ni and Zn were found in these solutions. These elements are substrate material components of alloys used to make the studs and they were quantified by X-ray fluorescence analysis. The defects of the coatings were also detected by scanning electron microscopy and energy dispersive spectroscopy analysis of the gold coated studs before and after the corrosion tests. Cytotoxicity studies indicated that after corrosion test the solution used was toxic in the culture cell assay. Among the elements quantified in the test solutions, Ni is considered responsible for most of allergic reactions. Results obtained in this work indicated the necessity to improve quality control of the coating process of studs and in the appropriate choice of material used as substrate

Advanced Data Mining of Leukemia Cells Micro-Arrays

OpenAIRE

Richard S. Segall; Ryan M. Pierce

2009-01-01

This paper provides continuation and extensions of previous research by Segall and Pierce (2009a) that discussed data mining for micro-array databases of Leukemia cells for primarily self-organized maps (SOM). As Segall and Pierce (2009a) and Segall and Pierce (2009b) the results of applying data mining are shown and discussed for the data categories of microarray databases of HL60, Jurkat, NB4 and U937 Leukemia cells that are also described in this article. First, a background section is pro...

Development of an SPR imaging biosensor for determination of cathepsin G in saliva and white blood cells

International Nuclear Information System (INIS)

Gorodkiewicz, E.; Wojtulewski, K.; Regulska, E.

2011-01-01

Cathepsin G (CatG) is an endopeptidase that is associated with the early immune response. The synthetic compound cathepsin G inhibitor I (CGI-I) was tested for its ability to inhibit the activity of CatG via a new surface plasmon resonance imaging assay. CGI-I was immobilized on the gold surface of an SPR sensor that was first modified with 1-octadecanethiol. A concentration of CGI-I equal to 4.0 μg.mL -1 and a pH of 8.0 were found to give the best results. The dynamic response of the sensor ranges from 0. 25 to 1. 5 ng.mL -1 , and the detection limit is 0. 12 ng.mL -1 . The sensor was applied to detect CatG in human saliva and white blood cells. (author)

Towed underwater PIV measurement for free-surface effects on turbulent wake of a surface-piercing body

Directory of Open Access Journals (Sweden)

Dong Myung Seol

2013-09-01

Full Text Available In the present study, a towed underwater particle image velocimetry (PIV system was validated in uniform flow and used to investigate the free-surface effects on the turbulent wake of a simple surface-piercing body. The selected test model was a cylindrical geometry formed by extruding the Wigley hull's waterplane shape in the vertical direction. Due to the constraints of the two-dimensional (2D PIV system used for the present study, the velocity field measurements were done separately for the vertical and horizontal planes. Using the measured data at several different locations, it was possible to identify the free-surface effects on the turbulent wake in terms of the mean velocity components and turbulence quantities. In order to provide an accuracy level of the data, uncertainty assessment was done following the International Towing Tank Conference standard procedure.

Voice Quality After a Semi-Occluded Vocal Tract Exercise With a Ventilation Mask in Contemporary Commercial Singers: Acoustic Analysis and Self-Assessments.

Science.gov (United States)

Fantini, Marco; Succo, Giovanni; Crosetti, Erika; Borragán Torre, Alfonso; Demo, Roberto; Fussi, Franco

2017-05-01

The current study aimed at investigating the immediate effects of a semi-occluded vocal tract exercise with a ventilation mask in a group of contemporary commercial singers. A randomized controlled study was carried out. Thirty professional or semi-professional singers with no voice complaints were randomly divided into two groups on recruitment: an experimental group and a control group. The same warm-up exercise was performed by the experimental group with an occluded ventilation mask placed over the nose and the mouth and by the control group without the ventilation mask. Voice was recorded before and after the exercise. Acoustic and self-assessment analysis were accomplished. The acoustic parameters of the voice samples recorded before and after training were compared, as well as the parameters' variations between the experimental and the control group. Self-assessment results of the experimental and the control group were compared too. Significant changes after the warm-up exercise included jitter, shimmer, and singing power ratio (SPR) in the experimental group. No significant changes were recorded in the control group. Significant differences between the experimental and the control group were found for ΔShimmer and ΔSPR. Self-assessment analysis confirmed a significantly higher phonatory comfort and voice quality perception for the experimental group. The results of the present study support the immediate advantageous effects on singing voice of a semi-occluded vocal tract exercise with a ventilation mask in terms of acoustic quality, phonatory comfort, and voice quality perception in contemporary commercial singers. Long-term effects still remain to be studied. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Site-directed antibody immobilization using a protein A-gold binding domain fusion protein for enhanced SPR immunosensing.

Science.gov (United States)

de Juan-Franco, Elena; Caruz, Antonio; Pedrajas, J R; Lechuga, Laura M

2013-04-07

We have implemented a novel strategy for the oriented immobilization of antibodies onto a gold surface based on the use of a fusion protein, the protein A-gold binding domain (PAG). PAG consists of a gold binding peptide (GBP) coupled to the immunoglobulin-binding domains of staphylococcal protein A. This fusion protein provides an easy and fast oriented immobilization of antibodies preserving its native structure, while leaving the antigen binding sites (Fab) freely exposed. Using this immobilization strategy, we have demonstrated the performance of the immunosensing of the human Growth Hormone by SPR. A limit of detection of 90 ng mL(-1) was obtained with an inter-chip variability lower than 7%. The comparison of this method with other strategies for the direct immobilization of antibodies over gold surfaces has showed the enhanced sensitivity provided by the PAG approach.

Suppression of Astronomical Sources Using Starshades and the McMath-Pierce Solar Telescope

Science.gov (United States)

Novicki, Megan; Warwick, Steve; Smith, Daniel; Richards, Michael; Harness, Anthony

2016-01-01

The external starshade is a method for the direct detection and spectral characterization of terrestrial planets around other stars, a key goal identified in ASTRO2010. Tests of this approach have been and continue to be conducted in the lab and in the field (Samuele et al., 2010, Glassman et al., 2014) using non-collimated light sources with a spherical wavefront. We extend the current approach to performing night-time observations of astronomical objects using small-scale (approximately 1/300th) starshades and the McMath-Pierce Solar Telescope at Kitt Peak National Observatory. We placed a starshade directly in the path of the beam from an astronomical object in front of the main heliostat. Using only flat mirrors, we then directed the light through the observatory path and reflected it off the West heliostat to an external telescope located approximately 270m away, for an effective baseline of 420m.This configuration allowed us to make measurements of flat wavefront sources with a Fresnel number close to those expected in proposed full-scale space configurations. We present the results of our engineering runs conducted in 2015.

Fast and sensitive detection of ochratoxin A in red wine by nanoparticle-enhanced SPR.

Science.gov (United States)

Karczmarczyk, Aleksandra; Reiner-Rozman, Ciril; Hageneder, Simone; Dubiak-Szepietowska, Monika; Dostálek, Jakub; Feller, Karl-Heinz

2016-09-21

Herein, we present a fast and sensitive biosensor for detection of Ochratoxin A (OTA) in a red wine that utilizes gold nanoparticle-enhanced surface plasmon resonance (SPR). By combining an indirect competitive inhibition immunoassay and signal enhancement by secondary antibodies conjugated with gold nanoparticles (AuNPs), highly sensitive detection of low molecular weight compounds (such as OTA) was achieved. The reported biosensor allowed for OTA detection at concentrations as low as 0.75 ng mL(-1) and its limit of detection was improved by more than one order of magnitude to 0.068 ng mL(-1) by applying AuNPs as a signal enhancer. The study investigates the interplay of size of AuNPs and affinity of recognition elements affecting the efficiency of the signal amplification strategy based on AuNP. Furthermore, we observed that the presence of polyphenolic compounds in wine samples strongly interferes with the affinity binding on the surface. To overcome this limitation, a simple pre-treatment of the wine sample with the binding agent poly(vinylpyrrolidone) (PVP) was successfully applied. Copyright © 2016 Elsevier B.V. All rights reserved.

Belly button piercings: a saving grace? A patent urachus presenting in a 17-year-old girl.

Science.gov (United States)

Bannon, Aidan; Black, Patrick; Turner, Joanna; Gray, Sam; Kirk, Stephen

2014-06-10

We report the case of a 17-year-old girl who presented to the accident and emergency department with dysuria and foul smelling, bloody discharge from her umbilicus. The definitive diagnosis was that of a patent urachus, which is a fistulous communication between the bladder and the umbilicus, usually diagnosed in early infancy. The incidence of a patent urachus is approximately 1 in 70,000 in the general population. It is highly likely that removal of a recent belly button piercing resulted in the acute presentation by completing the fistulous tract to the skin. This case is of clinical relevance as the diagnosis was missed 18 months prior with a milder presentation. The recommended treatment option is surgical excision due to the potential risk of malignant change, with urachal adenocarcinoma accounting for 0.3% of all bladder cancers. 2014 BMJ Publishing Group Ltd.

Analysis of Surface Plasmon Resonance Curves with a Novel Sigmoid-Asymmetric Fitting Algorithm

Directory of Open Access Journals (Sweden)

Daeho Jang

2015-09-01

Full Text Available The present study introduces a novel curve-fitting algorithm for surface plasmon resonance (SPR curves using a self-constructed, wedge-shaped beam type angular interrogation SPR spectroscopy technique. Previous fitting approaches such as asymmetric and polynomial equations are still unsatisfactory for analyzing full SPR curves and their use is limited to determining the resonance angle. In the present study, we developed a sigmoid-asymmetric equation that provides excellent curve-fitting for the whole SPR curve over a range of incident angles, including regions of the critical angle and resonance angle. Regardless of the bulk fluid type (i.e., water and air, the present sigmoid-asymmetric fitting exhibited nearly perfect matching with a full SPR curve, whereas the asymmetric and polynomial curve fitting methods did not. Because the present curve-fitting sigmoid-asymmetric equation can determine the critical angle as well as the resonance angle, the undesired effect caused by the bulk fluid refractive index was excluded by subtracting the critical angle from the resonance angle in real time. In conclusion, the proposed sigmoid-asymmetric curve-fitting algorithm for SPR curves is widely applicable to various SPR measurements, while excluding the effect of bulk fluids on the sensing layer.

Tuning the field distribution and fabrication of an Al@ZnO core-shell nanostructure for a SPR-based fiber optic phenyl hydrazine sensor.

Science.gov (United States)

Tabassum, Rana; Kaur, Parvinder; Gupta, Banshi D

2016-05-27

We report the fabrication and characterization of a surface plasmon resonance (SPR)-based fiber optic sensor that uses coatings of silver and aluminum (Al)-zinc oxide (ZnO) core-shell nanostructure (Al@ZnO) for the detection of phenyl hydrazine (Ph-Hyd). To optimize the volume fraction (f) of Al in ZnO and the thickness of the core-shell nanostructure layer (d), the electric field intensity along the normal to the multilayer system is simulated using the two-dimensional multilayer matrix method. The Al@ZnO core-shell nanostructure is prepared using the laser ablation technique. Various probes are fabricated with different values of f and an optimized thickness of core-shell nanostructure for the characterization of the Ph-Hyd sensor. The performance of the Ph-Hyd sensor is evaluated in terms of sensitivity. It is found that the Ag/Al@ZnO nanostructure core-shell-coated SPR probe with f = 0.25 and d = 0.040 μm possesses the maximum sensitivity towards Ph-Hyd. These results are in agreement with the simulated ones obtained using electric field intensity. In addition, the performance of the proposed probe is compared with that of probes coated with (i) Al@ZnO nanocomposite, (ii) Al nanoparticles and (iii) ZnO nanoparticles. It is found that the probe coated with an Al@ZnO core-shell nanostructure shows the largest resonance wavelength shift. The detailed mechanism of the sensing (involving chemical reactions) is presented. The sensor also manifests optimum performance at pH 7.

Application of Long-Range Surface Plasmon Resonance for ABO Blood Typing

Directory of Open Access Journals (Sweden)

Wanida Tangkawsakul

2016-01-01

Full Text Available In this study, we demonstrate a long-range surface plasmon resonance (LR-SPR biosensor for the detection of whole cell by captured antigens A and B on the surface of red blood cells (RBCs as a model. The LR-SPR sensor chip consists of high-refractive index glass, a Cytop film layer, and a thin gold (Au film, which makes the evanescent field intensity and the penetration depth longer than conventional SPR. Therefore, the LR-SPR biosensor has improved capability for detecting large analytes, such as RBCs. The antibodies specific to blood group A and group B (Anti-A and Anti-B are covalently immobilized on a grafting self-assembled monolayer (SAM/Au surface on the biosensor. For blood typing, RBC samples can be detected by the LR-SPR biosensor through a change in the refractive index. We determined that the results of blood typing using the LR-SPR biosensor are consistent with the results obtained from the agglutination test. We obtained the lowest detection limits of 1.58 × 105 cells/ml for RBC-A and 3.83 × 105 cells/ml for RBC-B, indicating that the LR-SPR chip has a higher sensitivity than conventional SPR biosensors (3.3 × 108 cells/ml. The surface of the biosensor can be efficiently regenerated using 20 mM NaOH. In summary, as the LR-SPR technique is sensitive and has a simple experimental setup, it can easily be applied for ABO blood group typing.

Towards an electronic dog nose: surface plasmon resonance immunosensor for security and safety.

Science.gov (United States)

Onodera, Takeshi; Toko, Kiyoshi

2014-09-05

This review describes an "electronic dog nose" based on a surface plasmon resonance (SPR) sensor and an antigen-antibody interaction for security and safety. We have concentrated on developing appropriate sensor surfaces for the SPR sensor for practical use. The review covers different surface fabrications, which all include variations of a self-assembled monolayer containing oligo(ethylene glycol), dendrimer, and hydrophilic polymer. We have carried out detection of explosives using the sensor surfaces. For the SPR sensor to detect explosives, the vapor or particles of the target substances have to be dissolved in a liquid. Therefore, we also review the development of sampling processes for explosives, and a protocol for the measurement of explosives on the SPR sensor in the field. Additionally, sensing elements, which have the potential to be applied for the electronic dog nose, are described.

Towards an Electronic Dog Nose: Surface Plasmon Resonance Immunosensor for Security and Safety

Directory of Open Access Journals (Sweden)

Takeshi Onodera

2014-09-01

Full Text Available This review describes an “electronic dog nose” based on a surface plasmon resonance (SPR sensor and an antigen–antibody interaction for security and safety. We have concentrated on developing appropriate sensor surfaces for the SPR sensor for practical use. The review covers different surface fabrications, which all include variations of a self-assembled monolayer containing oligo(ethylene glycol, dendrimer, and hydrophilic polymer. We have carried out detection of explosives using the sensor surfaces. For the SPR sensor to detect explosives, the vapor or particles of the target substances have to be dissolved in a liquid. Therefore, we also review the development of sampling processes for explosives, and a protocol for the measurement of explosives on the SPR sensor in the field. Additionally, sensing elements, which have the potential to be applied for the electronic dog nose, are described.

Sealing of transmitted-heat lines at wall piercings; Abdichtung von Fernwaermeleitungen in Mauerdurchfuehrungen

Energy Technology Data Exchange (ETDEWEB)

Werner, A.; Ney, K. [Doyma GmbH und Co., Oyten (Germany)

1998-04-01

Flexible sealing systems are necessary to provide permanent protection of transmitted-heat pipe wall penetrations against the ingress of water. Unlike the rigid sealing methods in widespread use, flexible sealing systems are capable of absorbing thermally induced pipe movements and thus of preventing leaks around such piercings. The following article provides an introduction to the subject and offers practical suggestions for the ideal design of transmitted-heat pipe wall penetrations. Sealing system variants with a range of degrees of flexibility are discussed, in addition to measures which need to be taken into account as early as the installation of the pipe itself. Prime attention is devoted not to methods already practised, but to recent, potentially marketable developments. (orig.) [Deutsch] Um Mauerdurchfuehrungen von Fernwaermeleitungen dauerhaft gegen das Eindringen von Wasser zu schuetzen, sind flexible Abdichtsysteme notwendig. Im Gegensatz zu den verbreiteten starren Abdichtungsmethoden koennen flexible Systeme die thermisch bedingten Rohrbewegungen aufnehmen und damit Undichtigkeiten im Bereich der Durchfuehrungen verhindern. Der folgende Beitrag fuehrt in die Thematik ein und gibt praktische Hinweise, wie eine Mauerdurchfuehrung von Fernwaermeleitungen idealerweise gestaltet werden sollte. Neben Massnahmen, die bereits bei der Rohrverlegung zu beachten sind, werden Abdichtvarianten mit unterschiedlichem Flexibilitaetsgrad skizziert. Schwerpunkt der Untersuchung liegt hier nicht nur auf bereits bekannten Verfahren sondern auch auf marktfaehigen Neuentwicklungen. (orig.)

An Aptamer Bio-barCode (ABC) assay using SPR, RNase H, and probes with RNA and gold-nanorods for anti-cancer drug screening.

Science.gov (United States)

Loo, Jacky Fong-Chuen; Yang, Chengbin; Tsang, Hing Lun; Lau, Pui Man; Yong, Ken-Tye; Ho, Ho Pui; Kong, Siu Kai

2017-10-07

With modifications to an ultra-sensitive bio-barcode (BBC) assay, we have developed a next generation aptamer-based bio-barcode (ABC) assay to detect cytochrome-c (Cyto-c), a cell death marker released from cancer cells, for anti-cancer drug screening. An aptamer is a short single-stranded DNA selected from a synthetic DNA library that is capable of binding to its target with high affinity and specificity based on its unique DNA sequence and 3D structure after folding. Similar to the BBC assay, Cyto-c is captured by a micro-magnetic particle (MMP) coated with capturing antibodies (Ab) and an aptamer specifically against Cyto-c to form sandwich structures ([MMP-Ab]-[Cyto-c]-[Aptamer]). After washing and melting, our aptamers, acting as a DNA bio-barcode, are released from the sandwiches and hybridized with the probes specially designed for RNase H for surface plasmon resonance (SPR) sensing. In an aptamer-probe duplex, RNase H digests the RNA in the probe and releases the intact aptamer for another round of hybridization and digestion. With signal enhancement effects from gold-nanorods (Au-NRs) on probes for SPR sensing, the detection limit was found to be 1 nM for the aptamer and 80 pM for Cyto-c. Without the time-consuming DNA amplification steps by PCR, the detection process of this new ABC assay can be completed within three hours. As a proof-of-concept, phenylarsine oxide was found to be a potent agent to kill liver cancer cells with multi-drug resistance at the nano-molar level. This approach thus provides a fast, sensitive and robust tool for anti-cancer drug screening.

49 CFR 231.17 - Specifications common to all steam locomotives.

Science.gov (United States)

2010-10-01

... shall be securely fastened with bolts, rivets, or studs. (ii) Locomotives having Wootten type boilers... inches above outside edge of running boards, securely fastened with bolts, rivets, or studs. (c... inches in height, measured from the top of end sill, and securely fastened with bolts or rivets. (f...

Is the HP-UHP Hong'an-Dabie-Sulu orogen a piercing point for offset on the Tan-Lu fault?

Science.gov (United States)

Leech, Mary L.; Webb, Laura E.

2013-02-01

The Tan-Lu fault is a major strike-slip fault in eastern China that appears to offset the high-grade rocks of the Hong'an-Dabie-Sulu orogen left-laterally ˜540 km. We evaluate models for the collision between the South and North China blocks, published radiometric dates recording HP-UHP metamorphism and exhumation in the Hong'an-Dabie and Sulu terranes, and the timing of sinistral motion on the Tan-Lu fault to evaluate whether UHP rocks provide a piercing point for offset on the Tan-Lu fault. UHP metamorphism in Hong'an-Dabie was concurrent with Sulu based on U-Pb dating of coesite-bearing domains of zircon at 244 ± 5-226 ± 2 Ma for Hong'an-Dabie and 243 ± 4-225 ± 2 Ma for Sulu. Retrograde metamorphism began c. 220 Ma for both Hong'an-Dabie and Sulu, but retrograde zircon growth ended c. 214 Ma in Hong'an-Dabie and continued until c. 202 Ma in Sulu based on U-Pb dating of zircon domains external to coesite-bearing domains. Structures in Sulu are rotated 25° counter-clockwise from, but are broadly similar to, Hong'an-Dabie suggesting the two areas have a common Triassic orogenic history that pre-dates motion on the Tan-Lu fault, and that is consistent with paleomagnetic studies. We constructed a pre-Cretaceous restoration of the Hong'an-Dabie-Sulu belt that moves the Sulu terrane south, aligning the suture and the eclogite-facies isograd, and rotates Sulu c. 25° clockwise to re-align structures with Hong'an-Dabie. Our restoration is supported by published data and shows that the Hong'an-Dabie-Sulu orogen is a piercing point for post-collisional offset on the Tan-Lu fault and that these regions shared a common subduction-exhumation history. The Tan-Lu fault did not play a significant role in the Hong'an-Dabie-Sulu collision and likely developed later, in the Early Cretaceous.

Analysis of cavern and well stability at the West Hackberry SPR site using a full-dome model.

Energy Technology Data Exchange (ETDEWEB)

Sobolik, Steven R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-01

This report presents computational analyses that simulate the structural response of caverns at the Strategic Petroleum Reserve (SPR) West Hackberry site. The cavern field comprises 22 caverns. Five caverns (6, 7, 8, 9, 11) were acquired from industry and have unusual shapes and a history dating back to 1946. The other 17 caverns (101-117) were leached according to SPR standards in the mid-1980s and have tall cylindrical shapes. The history of the caverns and their shapes are simulated in a three-dimensional geomechanics model of the site that predicts deformations, strains, and stresses. Future leaching scenarios corresponding to oil drawdowns using fresh water are also simulated by increasing the volume of the caverns. Cavern pressures are varied in the model to capture operational practices in the field. The results of the finite element model are interpreted to provide information on the current and future status of subsidence, well integrity, and cavern stability. The most significant results in this report are relevant to Cavern 6. The cavern is shaped like a bowl with a large ceiling span and is in close proximity to Cavern 9. The analyses predict tensile stresses at the edge of the ceiling during repressurization of Cavern 6 following workover conditions. During a workover the cavern is at low pressure to service a well. The wellhead pressures are atmospheric. When the workover is complete, the cavern is repressurized. The resulting elastic stresses are sufficient to cause tension around the edge of the large ceiling span. With time, these stresses relax to a compressive state because of salt creep. However, the potential for salt fracture and propagation exists, particularly towards Cavern 9. With only 200 feet of salt between the caverns, the operational consequences must be examined if the two caverns become connected. A critical time may be during a workover of Cavern 9 in part because of the operational vulnerabilities, but also because dilatant damage

Effect of laser energy on the SPR and size of silver nanoparticles synthesized by pulsed laser ablation in distilled water

Science.gov (United States)

Baruah, Prahlad K.; Sharma, Ashwini K.; Khare, Alika

2018-04-01

The effect of incident laser energy on the surface plasmon resonance (SPR) and size of silver nanoparticles synthesized via pulsed laser ablation of silver immersed in distilled water is reported in this paper. The broadening in the plasmonic bandwidth of the synthesized nanoparticles with the increase in the laser energy incident onto the silver target indicates the reduction in size of the nanoparticles. This is confirmed by the transmission electron microscope (TEM) images which show a decrease in the average particle size of the nanoparticles from approximately 15 to 10 nm with the increase in incident laser energy from 30 to 70 mJ, respectively. The structural features as revealed by the selected area electron diffraction and ultra-high resolution TEM studies confirmed the formation of both silver as well as silver oxide nanoparticles.

Water physical and chemical data from current meter and bottle casts from the G.W. PIERCE as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1975-10-22 to 1975-10-31 (NODC Accession 8200067)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the G.W. PIERCE from October 22, 1975 to October 31, 1975. Data were...

Política do corpo e política de vida: a tatuagem e o body piercing como expressão corporal de uma ética da dissidência Politics of the body, politics of life: tattoos and body piercing as a corporal expression of an ethics of dissidence

Directory of Open Access Journals (Sweden)

Vitor Sérgio Ferreira

2007-11-01

Full Text Available A estética da divergência, que caracteriza a corporeidade extensivamente marcada com recurso à tatuagem e ao body piercing, configura uma forma de demarcação estilística através da qual alguns jovens constroem e dão a (reconhecer não só a sua identidade pessoal, mas também o modo como percebem e se relacionam com o mundo. Implica uma performance estética que excorpora uma homóloga atitude ética, consubstanciando um sentido de desafiliação perante a ordem cultural e social estabelecida. Trata-se de uma ética de dissidência que reclama uma remoralização da vida quotidiana no sentido de conquistar um espaço social de existência no mundo, onde seja possível viver o compromisso com um corpo, uma identidade e um estilo de vida que se pretende «alternativo» aos disponibilizados pelo actual «supermercado de estilos», em condições de autenticidade, respeito e liberdade individual.The aesthetic of divergence that characterises extensively tattooed and body pierced bodies, represents a way of stylistic demarcation through which some young people build and reveal not only their personal identity, but also the way they perceive and relate to the world. It implies an aesthetic performance that embodies a homologous ethical attitude, consubstantiated in a sense of disaffiliation towards the established social and cultural order. It is an ethic of dissidence that reclaims a remoralisation of day-to-day life, so as to conquer a social space of existence in the world, where it is possible to live a commitment with a body, an identity, and a life style that aims to be "alternative" to the current "supermarket of styles" on offer, under conditions of authenticity, respect and personal freedom.

Determination of material distribution in heading process of small bimetallic bar

Science.gov (United States)

Presz, Wojciech; Cacko, Robert

2018-05-01

The electrical connectors mostly have silver contacts joined by riveting. In order to reduce costs, the core of the contact rivet can be replaced with cheaper material, e.g. copper. There is a wide range of commercially available bimetallic (silver-copper) rivets on the market for the production of contacts. Following that, new conditions in the riveting process are created because the bi-metal object is riveted. In the analyzed example, it is a small size object, which can be placed on the border of microforming. Based on the FEM modeling of the load process of bimetallic rivets with different material distributions, the desired distribution was chosen and the choice was justified. Possible material distributions were parameterized with two parameters referring to desirable distribution characteristics. The parameter: Coefficient of Mutual Interactions of Plastic Deformations and the method of its determination have been proposed. The parameter is determined based of two-parameter stress-strain curves and is a function of these parameters and the range of equivalent strains occurring in the analyzed process. The proposed method was used for the upsetting process of the bimetallic head of the electrical contact. A nomogram was established to predict the distribution of materials in the head of the rivet and the appropriate selection of a pair of materials to achieve the desired distribution.

Relationships among Work Life, Mental Health Status and Organisation-based Self-esteem

Directory of Open Access Journals (Sweden)

Devin Hassan Fahim

2016-12-01

Full Text Available Quality of Work Life (QWL is a multi-dimensional concept that covers employees’ feelings about various dimensions of work. The current study focused on QWL that can contribute to the mental health status and Organisation-Based Self-Esteem (OBSE of employees in context of sport organisation in Iran. In this descriptive–correlative study, data was collected using three standard questionnaires: Goldberg’s (1978 General Health Questionnaire (GHQ-12, Pierce, Gardner, Cummings and Dunham's (1989 OBSE scale, and Walton’s (1975 QWL questionnaire. The statistical sample of the study consisted of 67 (53 male, 14 female employees of sport and youth organisations of the Northern Khorasan Province of Iran. The alpha value for mental health, OBSE and QWL questionnaires were, respectively, 0.82, 0.80, 0.79. QWL was significantly correlated with mental health status and self-esteem of employees. Thus, it can be concluded that mental health and self-esteem of employees depend on how these employees perceive QWL in organisations. Among QWL subscales, fair and adequate pay along with growth opportunities were the strongest predictors of mental health; growth opportunities along with development of human capabilities were the strongest predictors of self-esteem of employees. Our study adds to the growing body of research on mental health status in relation to factors such as QWL. In view of our findings, we hope that improving work environment as a means of improving one’s mental health status will be more emphasized by organisation managers.

The corrosion resistance of materials used for the manufacture of ear piercing studs

Directory of Open Access Journals (Sweden)

Correa, O. V.

2003-12-01

Full Text Available Nickel containing alloys have been widely used as substrates for the manufacture of studs used for ear piercing. Unfortunately, nickel has also been related to the development of allergic contact dermatitis caused by skin sensitization due to Ni²⁺ ions. Nickel ions can be leached out into the body fluids due to corrosion reactions. Defect free coatings are very difficult to produce, and therefore nickel free materials should be used as substrates of ear piercing studs, although the commercial alloys used usually contain this element. In this study, the corrosion resistance of two kinds of commercial studs prepared with nickel containing substrates and a titanium laboratory made stud was determined in a culture medium. The corrosion resistance of the studs was investigated by means of potentiodynamic polarization tests and electrochemical impedance spectroscopy as a function of immersion time in the culture medium. The elements that leached out into the medium due to corrosion reactions were analyzed by instrumental neutron activation analysis. The surfaces of the commercial gold-coated studs were examined by scanning electron microscopy and analyzed by energy dispersive spectroscopy, both before and after exposure to the culture medium. The cytotoxicity of the tested studs was also determined in the culture medium.

Aleaciones conteniendo níquel se han utilizado como substratos para la fabricación de aretes perforantes para orejas. Desafortunadamente, el níquel ha sido relacionado con el desarrollo de una reacción alérgica conocida como dermatitis de contacto, causada por la sensibilización debido a los iones de Ni²⁺. Estos iones pueden ser liberados hacia los fluidos corporales debido a las reacciones de corrosión. Los aretes, habitualmente, se revisten con películas de oro. Sin embargo, es muy difícil hacer los revestimientos libres de defectos superficiales. Por lo tanto, materiales sin níquel deber

Temperature profiles from expendable bathythermograph (XBT) casts from NOAA Ship RESEARCHER and the G. W. PIERCE in the Gulf of Mexico in support of the Integrated Global Ocean Services System (IGOSS) from 1979-09-12 to 1979-10-02 (NODC Accession 7900341)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — XBT data were collected from NOAA Ship RESEARCHER and the G. W. PIERCE in support of the Integrated Global Ocean Services System (IGOSS). Data were collected by the...

End-to-end self-assembly of gold nanorods in isopropanol solution: experimental and theoretical studies

Energy Technology Data Exchange (ETDEWEB)

Gordel, M., E-mail: marta.gordel@pwr.edu.pl [Wrocław University of Technology, Advanced Materials Engineering and Modelling Group, Faculty of Chemistry (Poland); Piela, K., E-mail: katarzyna.piela@pwr.edu.pl [Wrocław University of Technology, Department of Physical and Quantum Chemistry (Poland); Kołkowski, R. [Wrocław University of Technology, Advanced Materials Engineering and Modelling Group, Faculty of Chemistry (Poland); Koźlecki, T. [Wrocław University of Technology, Department of Chemical Engineering, Faculty of Chemistry (Poland); Buckle, M. [CNRS, École Normale Supérieure de Cachan, Laboratoire de Biologie et Pharmacologie Appliquée (France); Samoć, M. [Wrocław University of Technology, Advanced Materials Engineering and Modelling Group, Faculty of Chemistry (Poland)

2015-12-15

We describe here a modification of properties of colloidal gold nanorods (NRs) resulting from the chemical treatment used to carry out their transfer into isopropanol (IPA) solution. The NRs acquire a tendency to attach one to another by their ends (end-to-end assembly). We focus on the investigation of the change in position and shape of the longitudinal surface plasmon (l-SPR) band after self-assembly. The experimental results are supported by a theoretical calculation, which rationalizes the dramatic change in optical properties when the NRs are positioned end-to-end at short distances. The detailed spectroscopic characterization performed at the consecutive stages of transfer of the NRs from water into IPA solution revealed the features of the interaction between the polymers used as ligands and their contribution to the final stage, when the NRs were dispersed in IPA solution. The efficient method of aligning the NRs detailed here may facilitate applications of the self-assembled NRs as building blocks for optical materials and biological sensing.Graphical Abstract.

Chemical, physical, phytoplankton weight, and other data collected using meteorological sensors, plankton net, secchi disk, CTD, and bottle casts from the G.W. PIERCE as part of the California Cooperative Fisheries Investigation (CALCOFI) project, from 19 June 1971 to 14 September 1980 (NODC Accession 8300037)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, physical, phytoplankton weight, and other data were collected from the G.W. PIERCE from June 19, 1971 to September 14, 1980. Data were collected using...

Design of experiment existing parameter physics for supporting of Boron Neutron Capture Therapy (BNCT) method a t the piercing radial beam port of Kartini research reactor

International Nuclear Information System (INIS)

Indry Septiana Novitasari; Yosaphat Sumardi; Widarto

2014-01-01

The experiment existing parameters physics for supporting of in vivo and in vitro test facility of Boron Neutron Capture Therapy (BNCT) preliminary study at the piercing radial beam port has been done. The existing experiments is needed for determining that the parameter physics is fulfill the BNCT method requirement. To realize the existing experiment have been done by design analysis, methodology, calculation method and some procedure related with radiation safety analysis and environment. Preparation for existing experiment physics such as foil detector of Gold (Au) should be irradiated for 30 minute, irradiation instrument and procedure related with the experiment for radiation safety. (author)

Proteomics approach to identify unique xylem sap proteins in Pierce's disease-tolerant Vitis species.

Science.gov (United States)

Basha, Sheikh M; Mazhar, Hifza; Vasanthaiah, Hemanth K N

2010-03-01

Pierce's disease (PD) is a destructive bacterial disease of grapes caused by Xylella fastidiosa which is xylem-confined. The tolerance level to this disease varies among Vitis species. Our research was aimed at identifying unique xylem sap proteins present in PD-tolerant Vitis species. The results showed wide variation in the xylem sap protein composition, where a set of polypeptides with pI between 4.5 and 4.7 and M(r) of 31 kDa were present in abundant amount in muscadine (Vitis rotundifolia, PD-tolerant), in reduced levels in Florida hybrid bunch (Vitis spp., PD-tolerant) and absent in bunch grapes (Vitis vinifera, PD-susceptible). Liquid chromatography/mass spectrometry/mass spectrometry analysis of these proteins revealed their similarity to beta-1, 3-glucanase, peroxidase, and a subunit of oxygen-evolving enhancer protein 1, which are known to play role in defense and oxygen generation. In addition, the amount of free amino acids and soluble sugars was found to be significantly lower in xylem sap of muscadine genotypes compared to V. vinifera genotypes, indicating that the higher nutritional value of bunch grape sap may be more suitable for Xylella growth. These data suggest that the presence of these unique proteins in xylem sap is vital for PD tolerance in muscadine and Florida hybrid bunch grapes.

Advanced Data Mining of Leukemia Cells Micro-Arrays

Directory of Open Access Journals (Sweden)

Richard S. Segall

2009-12-01

Full Text Available This paper provides continuation and extensions of previous research by Segall and Pierce (2009a that discussed data mining for micro-array databases of Leukemia cells for primarily self-organized maps (SOM. As Segall and Pierce (2009a and Segall and Pierce (2009b the results of applying data mining are shown and discussed for the data categories of microarray databases of HL60, Jurkat, NB4 and U937 Leukemia cells that are also described in this article. First, a background section is provided on the work of others pertaining to the applications of data mining to micro-array databases of Leukemia cells and micro-array databases in general. As noted in predecessor article by Segall and Pierce (2009a, micro-array databases are one of the most popular functional genomics tools in use today. This research in this paper is intended to use advanced data mining technologies for better interpretations and knowledge discovery as generated by the patterns of gene expressions of HL60, Jurkat, NB4 and U937 Leukemia cells. The advanced data mining performed entailed using other data mining tools such as cubic clustering criterion, variable importance rankings, decision trees, and more detailed examinations of data mining statistics and study of other self-organized maps (SOM clustering regions of workspace as generated by SAS Enterprise Miner version 4. Conclusions and future directions of the research are also presented.

Investigation of unstable periodic space-time states in distributed active system with supercritical current

International Nuclear Information System (INIS)

Koronovskij, A.A.; Rempen, I.S.; Khramov, A.E.

2003-01-01

The set of the unstable periodic space-time states, characterizing the chaotic space-time dynamics of the electron beam with the supercritical current in the Pierce diode is discussed. The Lyapunov indicators of the revealed instable space-time states of the chaotic dynamics of the distributed self-excited system are calculated. It is shown that change in the set of the unstable periodic states in dependence on the Pierce parameter is determined by change in the various orbits stability, which is demonstrated by the values of senior Lyapunov unstable state index [ru