Geochemistry and mineralogy of arsenic in mine wastes and stream sediments in a historic metal mining area in the UK

Energy Technology Data Exchange (ETDEWEB)

Rieuwerts, J.S., E-mail: jrieuwerts@plymouth.ac.uk [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL4 8AA (United Kingdom); Mighanetara, K.; Braungardt, C.B. [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL4 8AA (United Kingdom); Rollinson, G.K. [Camborne School of Mines, CEMPS, University of Exeter, Tremough Campus, Penryn, Cornwall TR10 9EZ (United Kingdom); Pirrie, D. [Helford Geoscience LLP, Menallack Farm, Treverva, Penryn, Cornwall TR10 9BP (United Kingdom); Azizi, F. [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL4 8AA (United Kingdom)

2014-02-01

Mining generates large amounts of waste which may contain potentially toxic elements (PTE), which, if released into the wider environment, can cause air, water and soil pollution long after mining operations have ceased. The fate and toxicological impact of PTEs are determined by their partitioning and speciation and in this study, the concentrations and mineralogy of arsenic in mine wastes and stream sediments in a former metal mining area of the UK are investigated. Pseudo-total (aqua-regia extractable) arsenic concentrations in all samples from the mining area exceeded background and guideline values by 1–5 orders of magnitude, with a maximum concentration in mine wastes of 1.8 × 10{sup 5} mg kg{sup −1} As and concentrations in stream sediments of up to 2.5 × 10{sup 4} mg kg{sup −1} As, raising concerns over potential environmental impacts. Mineralogical analysis of the wastes and sediments was undertaken by scanning electron microscopy (SEM) and automated SEM-EDS based quantitative evaluation (QEMSCAN®). The main arsenic mineral in the mine waste was scorodite and this was significantly correlated with pseudo-total As concentrations and significantly inversely correlated with potentially mobile arsenic, as estimated from the sum of exchangeable, reducible and oxidisable arsenic fractions obtained from a sequential extraction procedure; these findings correspond with the low solubility of scorodite in acidic mine wastes. The work presented shows that the study area remains grossly polluted by historical mining and processing and illustrates the value of combining mineralogical data with acid and sequential extractions to increase our understanding of potential environmental threats. - Highlights: • Stream sediments in a former mining area remain polluted with up to 25 g As per kg. • The main arsenic mineral in adjacent mine wastes appears to be scorodite. • Low solubility scorodite was inversely correlated with potentially mobile As. • Combining

Geochemistry and mineralogy of arsenic in mine wastes and stream sediments in a historic metal mining area in the UK

International Nuclear Information System (INIS)

Rieuwerts, J.S.; Mighanetara, K.; Braungardt, C.B.; Rollinson, G.K.; Pirrie, D.; Azizi, F.

2014-01-01

Mining generates large amounts of waste which may contain potentially toxic elements (PTE), which, if released into the wider environment, can cause air, water and soil pollution long after mining operations have ceased. The fate and toxicological impact of PTEs are determined by their partitioning and speciation and in this study, the concentrations and mineralogy of arsenic in mine wastes and stream sediments in a former metal mining area of the UK are investigated. Pseudo-total (aqua-regia extractable) arsenic concentrations in all samples from the mining area exceeded background and guideline values by 1–5 orders of magnitude, with a maximum concentration in mine wastes of 1.8 × 10 5 mg kg −1 As and concentrations in stream sediments of up to 2.5 × 10 4 mg kg −1 As, raising concerns over potential environmental impacts. Mineralogical analysis of the wastes and sediments was undertaken by scanning electron microscopy (SEM) and automated SEM-EDS based quantitative evaluation (QEMSCAN®). The main arsenic mineral in the mine waste was scorodite and this was significantly correlated with pseudo-total As concentrations and significantly inversely correlated with potentially mobile arsenic, as estimated from the sum of exchangeable, reducible and oxidisable arsenic fractions obtained from a sequential extraction procedure; these findings correspond with the low solubility of scorodite in acidic mine wastes. The work presented shows that the study area remains grossly polluted by historical mining and processing and illustrates the value of combining mineralogical data with acid and sequential extractions to increase our understanding of potential environmental threats. - Highlights: • Stream sediments in a former mining area remain polluted with up to 25 g As per kg. • The main arsenic mineral in adjacent mine wastes appears to be scorodite. • Low solubility scorodite was inversely correlated with potentially mobile As. • Combining mineralogical and

Clay mineralogy of surface sediments as a tool for deciphering river contributions to the Cariaco Basin (Venezuela)

Science.gov (United States)

Bout-Roumazeilles, V.; Riboulleau, A.; du Châtelet, E. Armynot; Lorenzoni, L.; Tribovillard, N.; Murray, R. W.; Müller-Karger, F.; Astor, Y. M.

2013-02-01

The mineralogical composition of 95 surface sediment samples from the Cariaco Basin continental shelf and Orinoco delta was investigated in order to constrain the clay-mineral main provenance and distribution within the Cariaco Basin. The spatial variability of the data set was studied using a geo-statistical approach that allows drawing representative clay-mineral distribution maps. These maps are used to identify present-day dominant sources for each clay-mineral species in agreement with the geological characteristics of the main river watersheds emptying into the basin. This approach allows (1) identifying the most distinctive clay-mineral species/ratios that determine particle provenance, (2) evaluating the respective contribution of local rivers, and (3) confirming the minimal present-day influence of the Orinoco plume on the Cariaco Basin sedimentation. The Tuy, Unare, and Neveri Rivers are the main sources of clay particles to the Cariaco Basin sedimentation. At present, the Tuy River is the main contributor of illite to the western part of the southern Cariaco Basin continental shelf. The Unare River plume, carrying smectite and kaolinite, has a wide westward propagation, whereas the Neveri River contribution is less extended, providing kaolinite and illite toward the eastern Cariaco Basin. The Manzanares, Araya, Tortuga, and Margarita areas are secondary sources of local influence. These insights shed light on the origin of present-day terrigenous sediments of the Cariaco Basin and help to propose alternative explanations for the temporal variability of clay mineralogy observed in previously published studies.

Combined mineralogical and EXAFS characterization of polluted sediments for the definition of technological variables and constraints

Science.gov (United States)

Brigatti, M. F.; Elmi, C.; Laurora, A.; Malferrari, D.; Medici, L.

2009-04-01

An extremely severe aspect, both from environmental and economic viewpoint, is the management of polluted sediments removed from drainage and irrigation canals. Canals, in order to retain their functionality over the time, need to have their beds, periodically cleaned from sediments there accumulating. The management of removed sediments is extremely demanding, also from an economical perspective, if these latter needs to be treated as dangerous waste materials, as stated in numerous international standards. Furthermore the disposal of such a large amount of material may introduce a significant environmental impact as well. An appealing alternative is the recovery or reuse of these materials, for example in brick and tile industry, after obviously the application of appropriate techniques and protocols that could render these latter no longer a threat for human health. The assessment of the effective potential danger for human health and ecosystem of sediments before and after treatment obviously requires both a careful chemical and mineralogical characterization and, even if not always considered in the international standards, the definition of the coordination shell of heavy metals dangerous for human health, as a function of their oxidation state and coordination (e.g. Cr and Pb), and introducing technological constraints or affecting the features of the end products. Fe is a good representative for this second category, as the features of the end product, such as color, strongly depend not only from Fe concentration but also from its oxidation state, speciation and coordination. This work will first of all provide mineralogical characterization of sediments from various sampling points of irrigation and drainage canals of Po river region in the north-eastern of Italy. Samples were investigated with various approaches including X-ray powder diffraction under non-ambient conditions, thermal analysis and EXAFS spectroscopy. Obtained results, and in particular

Occurrence of pesticides in groundwater and sediments and mineralogy of sediments and grain coatings underlying the Rutgers Agricultural Research and Extension Center, Upper Deerfield, New Jersey, 2007

Science.gov (United States)

Reilly, Timothy J.; Smalling, Kelly L.; Meyer, Michael T.; Sandstrom, Mark W.; Hladik, Michelle; Boehlke, Adam R.; Fishman, Neil S.; Battaglin, William A.; Kuivila, Kathryn

2014-01-01

Water and sediment samples were collected from June through October 2007 from seven plots at the Rutgers Agricultural Research and Extension Center in Upper Deerfield, New Jersey, and analyzed for a suite of pesticides (including fungicides) and other physical and chemical parameters (including sediment mineralogy) by the U.S. Geological Survey. Plots were selected for inclusion in this study on the basis of the crops grown and the pesticides used. Forty-one pesticides were detected in 14 water samples; these include 5 fungicides, 13 herbicides, 1 insecticide, and 22 pesticide degradates. The following pesticides and pesticide degradates were detected in 50 percent or more of the groundwater samples: 1-amide-4-hydroxy-chorothalonil, alachlor sulfonic acid, metolachlor oxanilic acid, metolachlor sulfonic acid, metalaxyl, and simazine. Dissolved-pesticide concentrations ranged from below their instrumental limit of detection to 36 micrograms per liter (for metolachlor sulfonic acid, a degradate of the herbicide metolachlor). The total number of pesticides found in groundwater samples ranged from 0 to 29. Fourteen pesticides were detected in sediment samples from continuous cores collected within each of the seven sampled plots; these include 4 fungicides, 2 herbicides, and 7 pesticide degradates. Pesticide concentrations in sediment samples ranged from below their instrumental limit of detection to 34.2 nanograms per gram (for azoxystrobin). The total number of pesticides found in sediment samples ranged from 0 to 8. Quantitative whole-rock and grain-coating mineralogy of sediment samples were determined by x-ray diffraction. Whole-rock analysis indicated that sediments were predominantly composed of quartz. The materials coating the quartz grains were removed to allow quantification of the trace mineral phases present.

The mineralogical behavior of the phosphatic sedimentation in Pernambuco-Paraiba sedimentar coastal basin

International Nuclear Information System (INIS)

Albuquerque Menor, E. de; Amaral, A.J.R. do

1979-01-01

This work reports the execution of the ''Phosphate in the Sedimentary coastal zone of Pernambuco-Paraiba'' Project, resulting from the execution of 35 drilling holes distributed between Paulista City, State of Pernambuco and the Miriri river valley, State of Paraiba. The rocks were analysed by X-ray diffraction, and the results were used in the working up of mineralogical logs. The mineralogical logs interpretation makes possible to distinguish phosphorite and sandy phosphorite areas inside a mineralization zone, wich laterally passes to a phosphatic carbonatic rocks area situated far from cost line of that epoch. Differences of the mineral paragenesis are used under a regional sedimentar model conception and indicated as prospecting guides. The dominance of Kaolinite is related to continental sediments (Beberibe Formation). The dominance of montmorillonite, on the other hand, is more to marine facies than to particular conditions of the phosphatic mineralization. The analysis of these conditions shows that the continental areas resistant to the pre-Maestrichtrian transegressive oscillations coincide to the more favourable places to the phosphatic mineralization. (author) [pt

Sediment tracing in the upper Hunter catchment using elemental and mineralogical compositions: Implications for catchment-scale suspended sediment (dis)connectivity and management

Science.gov (United States)

Fryirs, Kirstie; Gore, Damian

2013-07-01

River bed colmation layers clog the interstices of gravel-bed rivers, impeding the vertical exchange of water and nutrients that drives ecosystem function in the hyporheic zone. In catchments where fine-grained sediment supply has increased since human disturbance, understanding sediment provenance and the (dis)connectivity of supply allows practitioners to target sediment source problems and treat them within catchment management plans. Release of alluvial fine-grained sediment from channel bank erosion since European settlement has resulted in the formation of a colmation layer along the upper Hunter River at Muswellbrook, eastern Australia. X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD) are used to determine the elemental and mineralogical signatures of colmation layer and floodplain sediment sources across this 4480 km2 catchment. This sediment tracing technique is used to construct a picture of how suspended sediment supply and (dis)connectivity operates in this catchment. In this system, the primary source areas are subcatchments in which sediments are stored largely in partly confined floodplain pockets, but from which sediment supply is unimpeded and directly connected to the receiving reach. Subcatchments in which alluvial sediment storage is significant — and which contain large, laterally unconfined valleys — are essentially 'switched off' or disconnected from the receiving reach. This is because large sediment sinks act to trap fine-grained sediment before it reaches the receiving reach, forming a buffer along the sediment conveyor belt. Given the age structure of floodplains in the receiving reach, this pattern of source area contributions and (dis)connectivity must have occurred throughout the Holocene.

Sedimentological, mineralogical, and geochemical results from surface sediments and the sediment record from Site 2 of the ICDP drilling project at Lake Towuti, Indonesia

Science.gov (United States)

Hasberg, A. K.; Melles, M.; Wennrich, V.; Vogel, H.; Just, J.; Russell, J. M.; Bijaksana, S.; Morlock, M.; Opitz, S.

2017-12-01

More than 1000 m of sediment core were recovered in spring 2015 from three different drill sites in tropical Lake Towuti (2.5°S, 121°E), Indonesia, during the Towuti Drilling Project (TDP) of the International Continental Scientific Drilling Program (ICDP). Furthermore, a set of 84 lake surface sediment samples, distributed over the entire lake, was collected in order to better understand modern sedimentary processes. The surface samples were investigated for physical, chemical, mineralogical, and biological properties at the University of Cologne (UoC), Germany. On the sediment cores macro- and microscopical lithological descriptions, line-scan imaging, logging of physical properties (MSCL), and subsampling was conducted at the National Lacustrine Core Facility of the University of Minnesota, USA, in November 2015 and January 2016. Afterwards, the archive core halves and 672 subsamples of TDP Site 2 were shipped to the UoC for X-Ray Fluorescence (XRF) scanning and sedimentological, geochemical, and mineralogical analyses, respectively, supplemented by visible to near-infrared spectroscopy (VNIR) at Brown University, USA. The data from the surface samples evidence that allochthonous sedimentation in Lake Towuti today is dominated by fluvial supply from five distinguishable source areas: (i) the Mahalona River to the north, which drains lakes Mahalona and Matano, (ii) inlets around the village of Timampu to the northwest, (iii) the Loeha River to the east, (iv) the Lengke River to the south, and (v) the Lemo-Lemo River to the northeast of Lake Towuti. Of these, source areas (ii) and (iii) as well as (iv) and (v) have similar geochemical compositions, respectively. In addition, the lake sedimentation is significantly influenced by gravitational sediment supply from steep slopes as well as lake-internal gravitational and density-driven processes. The uppermost 41 m of sediment core 2A consist of pelagic sediments (totaling 11 m) and event layers from mass movement

Mineralogy, geochemistry and microfacies of late Quaternary periplatform sediments: Carbonate export cycles and secondary processes - Sanganeb Atoll and Abington Reef, Sudan, Central Red Sea

OpenAIRE

Emmermann, Peter

2000-01-01

A set of sediment cores was obtained in the periplatform realm close to Sanganeb Atoll and Abington Reef, about 20 miles offshore the Sudanese coast in the central Red Sea. Microfacies, mineralogy and geochemistry of periplatform sediments were analysed to quantify glacial-interglacial variations in carbonate production and sediment export of the reefs in response to late Quaternary sealevel fluctuations. The present study showed that the periplatform sediments from the Sudanese shelf to grea...

Nano-mineralogy of suspended sediment during the beginning of coal rejects spill.

Science.gov (United States)

Civeira, Matheus S; Ramos, Claudete G; Oliveira, Marcos L S; Kautzmann, Rubens M; Taffarel, Silvio R; Teixeira, Elba C; Silva, Luis F O

2016-02-01

Ultrafine and nanometric sediment inputs into river systems can be a major source of nutrients and hazardous elements and have a strong impact on water quality and ecosystem functions of rivers and lakes regions. However, little is known to date about the spatial distribution of sediment sources in most large scale river basins in South America. The objective of this work was to study the coal cleaning rejects (CCRs) spill that occurred from a CCRs impoundment pond into the Tubarão River, South Brazil, provided a unique occasion to study the importance and role of incidental nanoparticles associated with pollutant dispersal from a large-scale, acute aquatic pollution event. Multifaceted geochemical research by X-ray diffraction (XRD), High Resolution-Transmission Electron microscopy (HR-TEM)/(Energy Dispersive Spectroscopy) EDS/(selected-area diffraction pattern) SAED, Field Emission-Scanning Electron Microscopy (FE-SEM)/EDS, and Raman spectroscopy, provided an in-depth understanding of importance of a nano-mineralogy approach of Aqueous Pollution Scenarios. The electron beam studies showed the presence of a number of potentially hazardous elements (PHEs) in nanoparticles (amorphous and minerals). Some of the neoformed ultrafine/nanoparticles found in the contaminated sediments are the same as those commonly associated with oxidation/transformation of oxides, silicates, sulfides, and sulfates. These data of the secondary ultra/nanoparticles, puts in evidence their ability to control the mobility of PHEs, suggesting possible presentations in environmental technology, including recuperation of sensitive coal mine. The developed methodology facilitated the sediment transport of the catchment providing consistent results and suggesting its usefulness as a tool for temporary rivers management. Copyright © 2015 Elsevier Ltd. All rights reserved.

Preliminary Results on Mineralogy and Geochemistry of Loki's Castle Arctic Vents and Host Sediments

Science.gov (United States)

Barriga, Fernando; Carvalho, Carlos; Inês Cruz, M.; Dias, Ágata; Fonseca, Rita; Relvas, Jorge; Pedersen, Rolf

2010-05-01

The Loki's Castle hydrothermal vent field was discovered in the summer of 2008, during a cruise led by the Centre of Geobiology of the University of Bergen, integrated in the H2Deep Project (Eurocores, ESF). Loki's Castle is the northernmost hydrothermal vent field discovered to date. It is located at the junction between the Mohns Ridge and the South Knipovich Ridge, in the Norwegian-Greenland Sea, at almost 74°N. This junction shows unique features and apparently there is no transform fault to accommodate the deformation generated by the bending of the rift valley from WSW-ENE to almost N-S. The Knipovich Rigde, being a complex structure, is an ultra-slow spreading ridge, with an effective spreading rate of only ~ 6 mm/y. It is partly masked by a substantial cover of glacial and post-glacial sediments, estimated to be between 12 and 20 ky old, derived from the nearby Bear Island fan, to the East of the ridge. The Loki's Castle vent site is composed of several active, over 10 m tall chimneys, producing up to 320°C fluid, at the top of a very large sulphide mound, which is estimated to be around 200 m in diameter. About a dozen gravity cores were obtained in the overall area. From these we collected nearly 200 subsamples. Eh and pH were measured in all subsamples. The Portuguese component of the H2Deep project is aimed at characterizing, chemically and mineralogically, the sulphide chimneys and the collected sediments around the vents (up to 5 meters long gravity cores). These studies are aimed at understanding the ore-forming system, and its implications for submarine mineral exploration, as well as the relation of the microbial population with the hydrothermal component of sediments. Here we present an overview of preliminary data on the mineralogical assemblage found in the analyzed sediments and chimneys. The identification of the different mineral phases was obtained through petrographic observations of polished thin sections under the microscope (with both

The chemistry and mineralogy of haloed burrows in pelagic sediment at DOMES Site A: The equatorial North Pacific

Science.gov (United States)

Piper, D.Z.; Rude, P.D.; Monteith, S.

1987-01-01

The chemical and mineralogical composition of burrowed sediment, recovered in 66 box cores at latitude 9??25???N and longitude 151??15???W in the equatorial Pacific, demonstrates the important role of infauna in determining the geochemistry of pelagic sediment. Haloed burrows, approximately 3 cm across, were present in many of the cores. Within early Tertiary sediment that was covered by less than 5 cm of surface Quaternary sediment in several cores, the burrows in cross-section consist of three units: (1) a dark yellowish-brown central zone of Quaternary sediment surrounded, by (2) a pale yellowish-orange zone (the halo) of Tertiary sediment, which is surrounded by (3) a metal-oxide precipitate; the enclosing Tertiary sediment is dusky brown. Several elements - Mn, Ni, Cu, Co, Zn, Sb and Ce - have been leached from the light-colored halo, whereas Cr, Cs, Hf, Rb, Sc, Ta, Th, U, the rare earth elements exclusive of Ce, and the major oxides have not been leached. The metal-oxide zone, 1-5 mm thick, contains as much as 16% MnO2, as the mineral todorokite. The composition of the todorokite, exclusive of the admixed Tertiary sediment, resembles the composition of the metal deficit of the halo and also the composition of surface ferromanganese nodules that have been interpreted as having a predominantly diagenetic origin. Thus bioturbation contributes not only to the redistribution of metals within pelagic sediment, but also to the accretion of ferromanganese nodules on the sea floor. ?? 1987.

Floodplain sediments of the 2002 catastrophic flood at the Vltava (Moldau) River and its tributaries: mineralogy, chemical composition, and post-sedimentary evolution

Czech Academy of Sciences Publication Activity Database

Navrátil, Tomáš; Rohovec, Jan; Žák, Karel

2008-01-01

Roč. 56, č. 2 (2008), s. 399-412 ISSN 0943-0105 R&D Projects: GA AV ČR IAA300130505 Institutional research plan: CEZ:AV0Z30130516 Keywords : Vltava (Moldau) River * Berounka River * floodplain sediments * 2002 catastrophic flood (Czech Republic) Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.026, year: 2008

Clay mineralogy, strontium and neodymium isotope ratios in the sediments of two High Arctic catchments (Svalbard)

Science.gov (United States)

Hindshaw, Ruth S.; Tosca, Nicholas J.; Piotrowski, Alexander M.; Tipper, Edward T.

2018-03-01

The identification of sediment sources to the ocean is a prerequisite to using marine sediment cores to extract information on past climate and ocean circulation. Sr and Nd isotopes are classical tools with which to trace source provenance. Despite considerable interest in the Arctic Ocean, the circum-Arctic source regions are poorly characterised in terms of their Sr and Nd isotopic compositions. In this study we present Sr and Nd isotope data from the Paleogene Central Basin sediments of Svalbard, including the first published data of stream suspended sediments from Svalbard. The stream suspended sediments exhibit considerable isotopic variation (ɛNd = -20.6 to -13.4; 87Sr / 86Sr = 0.73421 to 0.74704) which can be related to the depositional history of the sedimentary formations from which they are derived. In combination with analysis of the clay mineralogy of catchment rocks and sediments, we suggest that the Central Basin sedimentary rocks were derived from two sources. One source is Proterozoic sediments derived from Greenlandic basement rocks which are rich in illite and have high 87Sr / 86Sr and low ɛNd values. The second source is Carboniferous to Jurassic sediments derived from Siberian basalts which are rich in smectite and have low 87Sr / 86Sr and high ɛNd values. Due to a change in depositional conditions throughout the Paleogene (from deep sea to continental) the relative proportions of these two sources vary in the Central Basin formations. The modern stream suspended sediment isotopic composition is then controlled by modern processes, in particular glaciation, which determines the present-day exposure of the formations and therefore the relative contribution of each formation to the stream suspended sediment load. This study demonstrates that the Nd isotopic composition of stream suspended sediments exhibits seasonal variation, which likely mirrors longer-term hydrological changes, with implications for source provenance studies based on fixed

Sources and contamination rate of port sediments: evidences from dimensional, mineralogical, and chemical investigations

Science.gov (United States)

Lucchetti, Gabriella; Cutroneo, Laura; Carbone, Cristina; Consani, Sirio; Vagge, Greta; Canepa, Giuseppe; Capello, Marco

2017-04-01

Ports are complex environments due to their complicated geometry (quays, channels, and piers), the presence of human activities (vessel traffic, yards, industries, and discharges), and natural factors (stream and torrent inputs, sea action, and currents). Due to the many activities that take place in a port, sediments and waters are often contaminated by different kinds of chemicals, such as hydrocarbons, dioxins, pesticides, nutrients, and metals. The contamination rate of a port basin is site specific and depends on the sources of contamination in the nearby urban system as well as the port system itself, such as city discharges and sewers, river intake, vessel traffic, factories (Taylor and Owens, 2009). Moreover, two important sources and vehicles of contaminants are: a) anthropogenic road deposited sediments derived from the runoff of the port and city area, and natural road deposited sediments derived from rivers and torrents, and b) airborne particulate matter and sediments (Taylor and Owens, 2009). The Port of Genoa is situated at the apex of the Ligurian Sea in the north western Mediterranean Sea and is characterised by the presence of several commercial activities that have contributed, over the years, and still contribute today, to the contaminant accumulation in both the water column and the bottom sediments. This port basin includes the mouth of several streams and the mouth of the Bisagno and the Polcevera Torrents, along the banks of which can be found several small towns, quarries, factories, and the suburbs of the city of Genoa, a ferry terminal, different container terminals, marinas, dry docks, the coal power plant of Genoa, and different wastewater treatment plant discharges. Starting from these considerations, we have examined the marine environment of a port from the point of view of the water mass circulation, hydrological characteristics, distribution of the sediment grain size, mineralogical characteristics, and metal concentrations of the

Coordinating Chemical and Mineralogical Analyses of Antarctic Dry Valley Sediments as Potential Analogs for Mars

Science.gov (United States)

Patel, S. N.; Bishop, J. L.; Englert, P.; Gibson, E. K.

2015-01-01

The Antarctic Dry Valleys (ADV) provide a unique terrestrial analog for Martian surface processes as they are extremely cold and dry sedimentary environments. The surface geology and the chemical composition of the Dry Valleys that are similar to Mars suggest the possible presence of these soil-formation processes on Mars. The soils and sediments from Wright Valley, Antarctica were investigated in this study to examine mineralogical and chemical changes along the surface layer in this region and as a function of depth. Surface samples collected near Prospect Mesa and Don Juan Pond of the ADV were analyzed using visible/near-infrared (VNIR) and mid-IR reflectance spectroscopy and major and trace element abundances.

Application of Ground Penetrating Radar Supported by Mineralogical-Geochemical Methods for Mapping Unroofed Cave Sediments

Directory of Open Access Journals (Sweden)

Teja Čeru

2018-04-01

Full Text Available Ground penetrating radar (GPR using a special unshielded 50 MHz Rough Terrain Antenna (RTA in combination with a shielded 250 MHz antenna was used to study the capability of this geophysical method for detecting cave sediments. Allochthonous cave sediments found in the study area of Lanski vrh (W Slovenia are now exposed on the karst surface in the so-called “unroofed caves” due to a general lowering of the surface (denudation of carbonate rocks and can provide valuable evidence of the karst development. In the first phase, GPR profiles were measured at three test locations, where cave sediments are clearly evident on the surface and appear with flowstone. It turned out that cave sediments are clearly visible on GPR radargrams as areas of strong signal attenuation. Based on this finding, GPR profiling was used in several other places where direct indicators of unroofed caves or other indicators for speleogenesis are not present due to strong surface reshaping. The influence of various field conditions, especially water content, on GPR measurements was also analysed by comparing radargrams measured in various field conditions. Further mineralogical-geochemical analyses were conducted to better understand the factors that influence the attenuation in the area of cave sediments. Samples of cave sediments and soils on carbonate rocks (rendzina were taken for X-ray diffraction (XRD and X-ray fluorescence (XRF analyses to compare the mineral and geochemical compositions of both sediments. Results show that cave sediments contain higher amounts of clay minerals and iron/aluminium oxides/hydroxides which, in addition to the thickness of cave sediments, can play an important role in the depth of penetration. Differences in the mineral composition also lead to water retention in cave sediments even through dry periods which additionally contribute to increased attenuation with respect to surrounding soils. The GPR method has proven to be reliable for

Mineralogia, micromorfologia e gênese de solos planossólicos do Sertão do Araripe, estado de Pernambuco Mineralogy, micromorphology and genesis of soils with stagnic properties from Sertão of Araripe, Pernambuco State, Brazil

Directory of Open Access Journals (Sweden)

L. B. Oliveira

2004-08-01

, feldspars and mica. The clay fraction is composed by kaolinite, mica, irregular interstratified minerals, smectite, and quartz. The highest amount of smectites and interstratified clay minerals were observed in the 2Btbn and 2BCn horizons. The solodic or natric B horizons (2Btbn is characterized by the presence of a blocky microstructure and well developed illuviation and weathering argillans, while the overlying argic B horizon has a granular microstructure and no argillans. The differences observed in the clay mineralogy and micromorphological features between the argic B horizon and the underlying poorly drained solodic or natric B horizon indicate the presence of two parent materials. The position of this Na-rich B horizon, which is high in argillans, and the absence of evidences of clay eluviations from the overlying argic B horizon suggest a paleopedogenesis for this horizon. Results indicate that the soils were developed in two stages. The first pedogenesis occurred on the crystalline rock basement. One of the evidences is the edged stone layer on top of the solodic or natric B horizon, probably formed because of differential erosion, originating a desertic pavement. Afterwards, the soils were covered by layers of highly weathered sediments, related to the Araripe high tableland, which were mixed at varied proportions with the topsoil of the underlying weathered parent material. Both materials have been affected by current pedogenic processes since their deposition.

An integrated geochemical, geophysical and mineralogical study of river sediments in alpine area and soil samples near steel plant, in Austria

Science.gov (United States)

Irfan, M. I.; Meisel, T.

2012-04-01

Concentration of nickel and chromium in any part of the ecosystem is important for environmental concerns in particular human health due to the reason that some species of them can cause health problem e.g. dermatitis and cancer. Sediment samples collected form a river Vordernberger Bach (Leoben, Austria) in an alpine region and soil samples collected in an area adjacent to steel production unit in same narrow valley were investigated. In previous studies a correlation between magnetic susceptibility values and concentration of nickel and chromium showed that a magnetic susceptibility meter can be used to point out the contaminated areas as in-situ device. The purpose of the whole study is to understand the real (point or diffuse, anthropogenic or geogenic) sources of contamination of soils, water and river sediments through heavy metal deposition. Unseparated, magnetic and non-magnetic fractions of soil samples were investigated for geochemical and mineralogical aspects with XRF, ICP-MS, EMPA, Multi-Functional Kappabridge (MFK1) and laser ablation coupled with ICP-MS. Mineralogical study of sediment samples for several sampling points with higher Ni and Cr content was performed. Sediment samples were sieved below 1.4 mm and then a concentrate of heavy minerals was prepared in the field through panning. Concentrated heavy minerals were then subjected for heavy liquid separation in the laboratory. Separated magnetic and non-magnetic fractions below 0.71/0.1 mm and density greater than 2.9 g/cm3 were selected for mineralogical investigation. The abundance of typical anthropogenic particles, e.g., spherical, tinder, roasted ores, iron and steel mill slag was observed under the microscope. Magnetite (mostly anthropogenic), maghemite, chromspinel, chromite (type I & II), (Ca,Al)-ferrite, wustite, apatite (anthropogenic), olivine mixed crystals, calcium silicate and spinel (anthropogenic) are found in magnetic fraction. Non-magnetic fractions contain hematite, siderite

Clay Mineralogy of AN Alluvial Aquifer in a Mountainous, Semiarid Terrain, AN Example from Rifle, Colorado

Science.gov (United States)

Elliott, W. C.; Lim, D.; Zaunbrecher, L. K.; Pickering, R. A.; Williams, K. H.; Navarre-Sitchler, A.; Long, P. E.; Noel, V.; Bargar, J.; Qafoku, N. P.

2015-12-01

Alluvial sediments deposited along the Colorado River corridor in the semi-arid regions of central to western Colorado can be important hosts for legacy contamination including U, V, As and Se. These alluvial sediments host aquifers which are thought to provide important "hot spots" and "hot moments" for microbiological activity controlling organic carbon processing and fluxes in the subsurface. Relatively little is known about the clay mineralogy of these alluvial aquifers and the parent alluvial sediments in spite of the fact that they commonly include lenses of silt-clay materials. These lenses are typically more reduced than coarser grained materials, but zones of reduced and more oxidized materials are present in these alluvial aquifer sediments. The clay mineralogy of the non-reduced parent alluvial sediments of the alluvial aquifer located in Rifle, CO (USA) is composed of chlorite, smectite, illite, kaolinite and quartz. The clay mineralogy of non-reduced fine-grained materials at Rifle are composed of the same suite of minerals found in the sediments plus a vermiculite-smectite intergrade that occurs near the bottom of the aquifer near the top of the Wasatch Formation. The clay mineral assemblages of the system reflect the mineralogically immature character of the source sediments. These assemblages are consistent with sediments and soils that formed in a moderately low rainfall climate and suggestive of minimal transport of the alluvial sediments from their source areas. Chlorite, smectite, smectite-vermiculite intergrade, and illite are the likely phases involved in the sorption of organic carbon and related microbial redox transformations of metals in these sediments. Both the occurrence and abundance of chlorite, smectite-vermiculite, illite and smectite can therefore exert an important control on the contaminant fluxes and are important determinants of biogeofacies in mountainous, semiarid terrains.

New insights into the mineralogy of the Atlantis II Deep metalliferous sediments, Red Sea

Science.gov (United States)

Laurila, Tea E.; Hannington, Mark D.; Leybourne, Matthew; Petersen, Sven; Devey, Colin W.; Garbe-Schönberg, Dieter

2015-12-01

The Atlantis II Deep of the Red Sea hosts the largest known hydrothermal ore deposit on the ocean floor and the only modern analog of brine pool-type metal deposition. The deposit consists mainly of chemical-clastic sediments with input from basin-scale hydrothermal and detrital sources. A characteristic feature is the millimeter-scale layering of the sediments, which bears a strong resemblance to banded iron formation (BIF). Quantitative assessment of the mineralogy based on relogging of archived cores, detailed petrography, and sequential leaching experiments shows that Fe-(oxy)hydroxides, hydrothermal carbonates, sulfides, and authigenic clays are the main "ore" minerals. Mn-oxides were mainly deposited when the brine pool was more oxidized than it is today, but detailed logging shows that Fe-deposition and Mn-deposition also alternated at the scale of individual laminae, reflecting short-term fluctuations in the Lower Brine. Previous studies underestimated the importance of nonsulfide metal-bearing components, which formed by metal adsorption onto poorly crystalline Si-Fe-OOH particles. During diagenesis, the crystallinity of all phases increased, and the fine layering of the sediment was enhanced. Within a few meters of burial (corresponding to a few thousand years of deposition), biogenic (Ca)-carbonate was dissolved, manganosiderite formed, and metals originally in poorly crystalline phases or in pore water were incorporated into diagenetic sulfides, clays, and Fe-oxides. Permeable layers with abundant radiolarian tests were the focus for late-stage hydrothermal alteration and replacement, including deposition of amorphous silica and enrichment in elements such as Ba and Au.

Kaolin clays from Patagonia - Argentina. Relationship between the mineralogy and ceramic properties; Arcillas caolinicas de la Patagonia argentina. Relacion entre la mineralogia y las propiedades ceramicas

Energy Technology Data Exchange (ETDEWEB)

Factorovich, J.C.; Badino, D. [Piedra Grande S.A., Buenos Aires (Argentina); Cravero, F.; Dominguez, E. [Universidad Nacional del Sur, Bahia Blanca (Argentina). Dept. de Geologia

1997-12-31

The mineralogy, grain size distribution, chemical composition, S and C contents, plasticity, and cationic exchange capacity are determined in the sedimentary kaolinitic clays from the clay pits Puma Negra, Puma Gris, Tincar Super; and Chenque and Cardenal located in Santa Cruz and Chubut Provinces. Mineralogy and Particle size distribution of > 5, 5-2 and <2{mu} fractions are determined. Modulus of rupture, 1100 and 1250 deg C shrinkage and water absorption and whiteness are found. It is accomplished a statistics correlation between the characteristics of grain size distribution, mineralogy, and other physical properties with the main ceramic properties to understand its influence in the ceramic process. (author) 5 refs., 2 tabs.

Physico-chemical and Mineralogical Characterisation of Subsurface ...

African Journals Online (AJOL)

Studies were carried out on subsurface sediments obtained around the Gaborone landfill area Botswana, in order to characterize their mineralogy and physico-chemistry, appraise any contaminant inputs from the landfill and assess their ability to attenuate contaminants from the landfill. Physico-chemical properties ...

Clay mineralogy of the mud banks of Cochin

Digital Repository Service at National Institute of Oceanography (India)

Nair, R.R.; Murty, P.S.N.

The mineralogy of the sediments constituting the mud banks formed off Cochin, Kerala, India was studied. The clay mineral composition was used as a means of understanding the nature and source of origin of the muds. Fine fraction of the mud samples...

Basis for paleoenvironmental interpretation of magnetic properties of sediment from Upper Klamath Lake (Oregon): Effects of weathering and mineralogical sorting

Science.gov (United States)

Rosenbaum, J.G.; Reynolds, R.L.

2004-01-01

Studies of magnetic properties enable reconstruction of environmental conditions that affected magnetic minerals incorporated in sediments from Upper Klamath Lake. Analyses of stream sediment samples from throughout the catchment of Upper Klamath Lake show that alteration of Fe-oxide minerals during subaerial chemical weathering of basic volcanic rocks has significantly changed magnetic properties of surficial deposits. Titanomagnetite, which is abundant both as phenocrysts and as microcrystals in fresh volcanic rocks, is progressively destroyed during weathering. Because fine-grained magnetite is readily altered due to large surface-to-volume ratios, weathering causes an increase in average magnetic grain size as well as reduction in the quantity of titanomagnetite both absolutely and relative to hematite. Hydrodynamic mineralogical sorting also produces differences in magnetic properties among rock and mineral grains of differing sizes. Importantly, removal of coarse silicate and Fe-oxide grains by sorting concentrated extremely fine-grained magnetite in the resulting sediment. The effects of weathering and sorting of minerals cannot be completely separated. These processes combine to produce the magnetic properties of a non-glacial lithic component of Upper Klamath Lake sediments, which is characterized by relatively low magnetite content and coarse magnetic grain size. Hydrodynamic sorting alone causes significant differences between the magnetic properties of glacial flour in lake sediments and of fresh volcanic rocks in the catchment. In comparison to source volcanic rocks, glacial flour in the lake sediment is highly enriched in extremely fine-grained magnetite.

Mineralogy of an active eolian sediment from the Namib dune, Gale crater, Mars

Science.gov (United States)

Achilles, C. N.; Downs, R. T.; Ming, D. W.; Rampe, E. B.; Morris, R. V.; Treiman, A. H.; Morrison, S. M.; Blake, D. F.; Vaniman, D. T.; Ewing, R. C.; Chipera, S. J.; Yen, A. S.; Bristow, T. F.; Ehlmann, B. L.; Gellert, R.; Hazen, R. M.; Fendrich, K. V.; Craig, P. I.; Grotzinger, J. P.; Des Marais, D. J.; Farmer, J. D.; Sarrazin, P. C.; Morookian, J. M.

2017-11-01

The Mars Science Laboratory rover, Curiosity, is using a comprehensive scientific payload to explore rocks and soils in Gale crater, Mars. Recent investigations of the Bagnold Dune Field provided the first in situ assessment of an active dune on Mars. The Chemistry and Mineralogy (CheMin) X-ray diffraction instrument on Curiosity performed quantitative mineralogical analyses of the history of the dune material and offers an important opportunity for ground truth of orbital observations. CheMin's analysis of the mineralogy and phase chemistry of modern and ancient Gale crater dune fields, together with other measurements by Curiosity's science payload, provides new insights into present and past eolian processes on Mars.

Mineralogy of an Active Eolian Sediment from the Namib Dune, Gale Crater, Mars

OpenAIRE

Achilles, C. N.; Downs, R. T.; Ming, D. W.; Rampe, E. B.; Morris, R. V.; Treiman, A. H.; Morrison, S. M.; Blake, D. F.; Vaniman, D. T.; Ewing, R. C.; Chipera, S. J.; Yen, A. S.; Bristow, T. F.; Ehlmann, B. L.; Gellert, R.

2017-01-01

The Mars Science Laboratory rover, Curiosity, is using a comprehensive scientific payload to explore rocks and soils in Gale crater, Mars. Recent investigations of the Bagnold Dune Field provided the first in situ assessment of an active dune on Mars. The Chemistry and Mineralogy (CheMin) X-ray diffraction instrument on Curiosity performed quantitative mineralogical analyses of the

Estimation of suspended sediment concentration by acoustic ...

African Journals Online (AJOL)

concentration of sediments such as glass spheres or sand. However, the acoustic properties of natural sediments vary and depend on many parameters such as particle size, shape, mineralogy and distribution of those parameters in sample. Therefore, this study was conducted to determine the possibility of soil sediment ...

Mineralogy and Geochemistry from Trollveggen Vent Field Chimneys and Metalliferous Sediments (Mohns Ridge, West Jan Mayen Fracture Zone at 71°N)

Science.gov (United States)

Dias, S.; Cruz, I.; Fonseca, R.; Barriga, F. J.; Pedersen, R.

2010-12-01

The Jan Mayen vent fields were discovered in the Mohns Ridge during an expedition with the Norwegian research vessel "G.O. Sars" in July 2005. They comprise two main active areas: (1) Soria Moria and (2) Gallionella Garden & Trollveggen. The Trollveggen vent field is located at depths of 700-750 m. Venting takes place mainly through white smoker chimneys with fluid temperatures reaching up to 260-270°C. Here we present mineralogical and geochemical data from vent chimneys and metalliferous sediments collected at the Trollveggen vent field with an ROV. Cross-sections of chimneys present evident mineralogical zonation, showing acicular barite crystals in the outer parts and sulfide enrichments in the interior (Sph + Cpy +/- Py - Po). Sediments are mainly formed by vent fragments but also by minerals precipitated by diffuse fluid circulation, showing a mineral assemblage similar to that of chimneys. Microprobe analyses were obtained both in sulfates and sulphides revealing a particular sphalerite composition, characterized by low Fe (< 2%) and high total trace metal contents (up to 4%, including Cu, Ag and Au). Geochemical profiles of gravity cores collected in the area surrounding Jan Mayen were also performed in order to investigate the presence of additional hydrothermal activity in the area. Total geochemical analyses showed a slight enrichment in trace metals, such as Cu, Zn and Fe, with exception of one core that reached 85 ppm for Cu, 150 ppm for Zn and 20% for Fe. The metal enrichment in this core suggests hydrothermal activity in the neighboring area.

Continental weathering as a driver of Late Cretaceous cooling: new insights from clay mineralogy of Campanian sediments from the southern Tethyan margin to the Boreal realm

Science.gov (United States)

Chenot, Elise; Deconinck, Jean-François; Pucéat, Emmanuelle; Pellenard, Pierre; Guiraud, Michel; Jaubert, Maxime; Jarvis, Ian; Thibault, Nicolas; Cocquerez, Théophile; Bruneau, Ludovic; Razmjooei, Mohammad J.; Boussaha, Myriam; Richard, James; Sizun, Jean-Pierre; Stemmerik, Lars

2018-03-01

New clay mineralogical analyses have been performed on Campanian sediments from the Tethyan and Boreal realms along a palaeolatitudinal transect from 45° to 20°N (Danish Basin, North Sea, Paris Basin, Mons Basin, Aquitaine Basin, Umbria-Marche Basin and Tunisian Atlas). Significant terrigenous inputs are evidenced by increasing proportions of detrital clay minerals such as illite, kaolinite and chlorite at various levels in the mid- to upper Campanian, while smectitic minerals predominate and represented the background of the Late Cretaceous clay sedimentation. Our new results highlight a distinct latitudinal distribution of clay minerals, with the occurrence of kaolinite in southern sections and an almost total absence of this mineral in northern areas. This latitudinal trend points to an at least partial climatic control on clay mineral sedimentation, with a humid zone developed between 20° and 35°N. The association and co-evolution of illite, chlorite and kaolinite in most sections suggest a reworking of these minerals from basement rocks weathered by hydrolysis, which we link to the formation of relief around the Tethys due to compression associated with incipient Tethyan closure. Diachronism in the occurrence of detrital minerals between sections, with detrital input starting earlier during the Santonian in the south than in the north, highlights the northward progression of the deformation related to the anticlockwise rotation of Africa. Increasing continental weathering and erosion, evidenced by our clay mineralogical data through the Campanian, may have resulted in enhanced CO2 consumption by silicate weathering, thereby contributing to Late Cretaceous climatic cooling.

Mineralogy of the clay fraction of alfisols in two slope curvatures: IV - spatial correlation with physical properties Mineralogia da fração argila de um argissolo em curvaturas do relevo: II - correlação especial com atributos físicos

Directory of Open Access Journals (Sweden)

Livia Arantes Camargo

2013-04-01

Full Text Available Although the influence of clay mineralogy on soil physical properties has been widely studied, spatial relationships between these features in Alfisols have rarely been examined. The purpose of this work was to relate the clay minerals and physical properties of an Alfisol of sandstone origin in two slope curvatures. The crystallographic properties such as mean crystallite size (MCS and width at half height (WHH of hematite, goethite, kaolinite and gibbsite; contents of hematite and goethite; aluminium substitution (AS and specific surface area (SSA of hematite and goethite; the goethite/(goethite+hematite and kaolinite/(kaolinite+gibbsite ratios; and the citrate/bicarbonate/dithionite extractable Fe (Fe d were correlated with the soil physical properties through Pearson correlation coefficients and cross-semivariograms. The correlations found between aluminium substitution in goethite and the soil physical properties suggest that the degree of crystallinity of this mineral influences soil properties used as soil quality indicators. Thus, goethite with a high aluminium substitution resulted in large aggregate sizes and a high porosity, and also in a low bulk density and soil penetration resistance. The presence of highly crystalline gibbsite resulted in a high density and micropore content, as well as in smaller aggregates. Interpretation of the cross-semivariogram and classification of landscape compartments in terms of the spatial dependence pattern for the relief-dependent physical and mineralogical properties of the soil proved an effective supplementary method for assessing Pearson correlations between the soil physical and mineralogical properties.A influência da mineralogia da fração argila nos atributos físicos do solo é reportada na literatura; porém, as relações espaciais entre esses atributos são escassas em se tratando de Argissolos. O objetivo deste trabalho foi avaliar a correlação espacial entre os minerais da fra

Reconstructing the Holocene depositional environments along the northern coast of Sfax (Tunisia): Mineralogical and sedimentological approaches

Science.gov (United States)

Lamourou, Ali; Touir, Jamel; Fagel, Nathalie

2017-05-01

A sedimentological and mineralogical study of sedimentary cores allowed reconstructing the evolution of depositional environments along the Northern coast of Sfax (Tunisia). The aim of this research work is to identify the factors controlling the sedimentation from the Holocene to the Present time. Three 30-m sediment cores collected by drilling at 30 m water depth were analyzed for their color, magnetic susceptibility signal, grain size by laser diffraction, organic matter content by loss of ignition, carbonate content by calcimetry and mineralogy by X-ray diffraction on bulk powder and clay <2 μm. They broadly present the same sedimentological and mineralogical features. Microscopical observations of petrographic slides allowed identifying six main sedimentary facies. Bulk mineralogical assemblages comprised clay minerals, quartz, calcite, gypsum and K-feldspars were examined. Considerable change was observed in the carbonate content that mimicked the bioclaste abundance and diluted the detrital minerals (clay minerals, quartz and feldspars). The gypsum mainly occurred in the lower sedimentary columns (SC12 and SC9) and in the upper/middle of core SC6. The clay fraction was made of a mixture of kaolinite, illite, smectite and palygorskite with no clear variation through core depth. Both grain-size parameters and magnetic susceptibility profile showed a sharp transition in the upper 2-5 m of the sedimentological columns. Coarse, sandy to gravely sediments characterized by a low magnetic susceptibility signal were replaced by fine bioclastic-rich clayey sediments. The analysis of vertical succession of depositional facies revealed a fluvial depositional environment (coastal plain) basically marked by fluvial channels and inundation plains at the bottom of all cores. However, core-top sediments recorded a littoral marine environment with sand depositions rich in gastropods, lamellibranches and algæ. Depositional facies, sedimentological and mineralogical

Mineralogia e química dos sedimentos de fundo do médio e baixo Madeira e de seus principais tributários: Amazonas - Brasil Mineralogy and chemistry of bottom sediments of the middle and lower Madeira River and its main tributaries: Amazonas - Brazil

Directory of Open Access Journals (Sweden)

Maria Mireide Andrade Queiroz

2011-01-01

Full Text Available O objetivo deste trabalho foi investigar a variação composicional e mineralógica dos sedimentos de fundo transportados pelos grandes rios da Amazônia, com nascentes nos Andes provenientes de rochas cratônicas. O estudo foi realizado com base em análises granulométricas, mineralógicas e químicas, incluindo isótopos de Pb, no rio Madeira e seus tributários. O conjunto de dados mostra que os sedimentos de fundo do rio Madeira são granulométrica, mineralógica e quimicamente distintos de seus principais tributários. Os sedimentos do rio Madeira são mais arenosos; têm maior quantidade de quartzo; menor conteúdo de Al2O3, Fe2O3, K2O, MgO, Na2O, PF, TiO2, P2O5, MnO e elementos-traço; e a maturidade aumenta de montante para jusante. Dentre os sedimentos dos tributários, os rios Machado e secundariamente o rio Marmelos são os que mais se aproximam da composição dos sedimentos do rio Madeira, enquanto que o Jamari com sedimentos com maior proporção de TiO2, Zr, Y, Nb, Ga, Hf, U, Ta e ETR, é o mais distinto. Apesar do ambiente de intenso intemperismo e erosão, em condições tropicais úmidas, a que estão submetidas as rochas drenadas pela bacia do rio Madeira, os valores das razões Th/Co, Th/Pb, Th/Yb, Al/Pb, Zr/Co e a composição isotópica de Pb indicam fontes distintas para os sedimentos de fundo estudados. Os sedimentos do rio Madeira são provenientes, principalmente, de rochas máficas, enquanto que os sedimentos de seus tributários têm como fonte essencialmente rochas félsicas.This study reports the granulometric, mineralogic and chemical analyses, including Pb isotope, carried out on the bottom sediments of the Madeira River, whose headwaters are in the Andes Mountain, and its tributaries that come from the cratonic region, in order to investigate the compositional variation of the sediments transported by the major rivers of the Amazon. The analytical data show that the bottom sediments of the Madeira River have

Mineralogia e físico-química dos solos de mangue do rio Iriri no canal de Bertioga (Santos, SP

Directory of Open Access Journals (Sweden)

Prada-Gamero R. M.

2004-01-01

Full Text Available A influência de condições halomórficas, hidromórficas e sulfato redutoras na mineralogia da fração argila e na geoquímica de três solos de mangue foi estudada no manguezal do rio Iriri. A partir de uma transeção, foram escolhidos três perfis representativos dos solos de mangue da área nos quais foram descritas as condições geoquímicas e sua conseqüência sobre a mineralogia de seus respectivos solos. A análise mineralógica (DRX e EDS e as condições físico-químicas encontradas revelam a ocorrência de processos de piritização na área de estudo. A assembléia mineralógica está composta tanto por argilominerais alóctones (caulinitas, micas e esmectitas como por argilominerais autóctones (micas, esmectitas e pirita. A partir de evidências provenientes da DRX e EDS, especula-se a formação de glauconita nestes solos. As condições de halomorfia e hidromorfia determinam valores de Eh e pH sob os quais elementos como Fe2+ e SO encontram-se livres na solução do solo com tendência à estabilidade da pirita (FeS2, favorecendo, portanto, o processo da piritização.

Characterization of Paleoredox Changes In Nw-pacific Deep-sea Sediments Using Environmental Magnetic In Combination With Geochemical-mineralogic Data

Science.gov (United States)

Urbat, M.; Pletsch, T.

The understanding of environmental and oceanic controls on deep-sea sediments in the NW Pacific Ocean (ODP Site 1149A, Nadezhda Basin) benefits from the inte- gration of environmental magnetic methodology with geochemical-mineralogic XRD (x-ray defraction) and XRF (x-ray fluorescence) data. Crucially, the inherently grad- ual diagenetic processes related to paleo-redox changes in the sediment column may be more sensitively monitored using the integration of non-magnetic and magnetic data, because they do reflect various aspects of the entire postdepositional alteration. The studied 32 m long quaternary interval at Hole ODP 1149A provides an expanded record of eolian dust supply from the Asian continent, siliceous plankton accumulation and varying contributions of both discrete ash layers and disperse ash to a truly deep- sea environment (Plank et al. 2000). Recurrent diagenetic intervals appear to be related to changes in the Ocean water circulation (Kuriosho current) and concomitant produc- tivity variations as a function of glacial-interglacial paleoclimatic changes. Diagenetic intervals correspond to paleo-redox boundaries, where suboxic conditions promoted the destruction of the primary magnetic signal (iron oxides) and the precipitation of rhodochrosite (MnCO3). We used simple normative calculations on the basis of of Al and Cr contents to discriminate between the major groups of components (terrigenous, volcanogenic, biogenic, diagenetic) in combination with our magnetic results. These results form the grounds for the discrimation and independent interpretation of the genetically various sediment components in the paleoceanograhic context.

Mineralogia dos solos da Estação Experimental "Theodureto de Camargo", em Campinas Mineralogy of the soils of the Experimental Station "Theodureto de Camargo" - Campinas

Directory of Open Access Journals (Sweden)

Adolpho J. Melfi

1966-01-01

Full Text Available São estudadas mineralògicamente séries monotípicas da Estação Experimental "Theodureto de Camargo", município de Campinas. Ocorre na área um sillde diabásio Mesozóico, intrusivo em rochas sedimentares cartaoníferas de origem glacial; os solos aí existentes provêm, então, ora de um ou outro tipo de rocha, ora da mistura de ambos. A série Chapadão originou-se de diabásio, sendo classificada como latossol roxo, vulgarmente denominado terra-roxa-legítima. A série Taquaral, também proveniente da mesma rocha, sofreu, entretanto, grande contribuição de sedimentos de origem glacial, evidenciada pela presença de zircão monazita, sillimanita, turmalina, rutilo, granada, estaurolita e cianita. As séries Venda Grande, Barão e Monjolinho derivaram-se de sedimentos arenosos, siltosos e argilosos de origem glacial. A série Pomar, cuja origem se deve também a rochas sedimentares carboníferas siltosas e argilosas, recebeu contribuição mineralógica proveniente do intemperismo do diabásio.The present paper studies the mineralogy of monotypic series determined at the Experimental Station "Theodureto de Camargo". The region is geologically characterized by the presence of a Mesozoic diabase still intruded in a carboniferous glacial sedimentary formation. The existent soils represent weathered products either of rocks-sedimentary or igneous kinds - or a mixture of both. The Chapadão series derived from diabase is classified as "purple latossol", commonly known by the name of "terra roxa legítima". The Taquaral series also results mainly from diabase but has been largely contaminated by glacial sedimentary products as revealed by the presence of zircon, monazite, sillimanite, tourmaline, rutile, garnet, staurolite and kyanite. The Venda Grande, Barão and Monjolinho series result from clayey, silty and sandy glacial sediments. The Pomar series made up of products of carboniferous clay and silt sediments: exhibits notwithstanding an

Mineralogic variations in fluvial sediments contaminated by mine tailings as determined from AVIRIS data, Coeur D'Alene River Valley, Idaho

Science.gov (United States)

Farrand, W. H.; Harsanyi, Joseph C.

1995-01-01

The success of imaging spectrometry in mineralogic mapping of natural terrains indicates that the technology can also be used to assess the environmental impact of human activities in certain instances. Specifically, this paper describes an investigation into the use of data from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) for mapping the spread of, and assessing changes in, the mineralogic character of tailings from a major silver and base metal mining district. The area under investigation is the Coeur d'Alene River Valley in northern Idaho. Mining has been going on in and around the towns of Kellogg and Wallace, Idaho since the 1880's. In the Kellogg-Smelterville Flats area, west of Kellogg, mine tailings were piled alongside the South Fork of the Coeur d'Alene River. Until the construction of tailings ponds in 1968 much of these waste materials were washed directly into the South Fork. The Kellogg-Smelterville area was declared an Environmental Protection Agency (EPA) Superfund site in 1983 and remediation efforts are currently underway. Recent studies have demonstrated that sediments in the Coeur d'Alene River and in the northern part of Lake Coeur d'Alene, into which the river flows, are highly enriched in Ag, Cu, Pb, Zn, Cd, Hg, As, and Sb. These trace metals have become aggregated in iron oxide and oxyhydroxide minerals and/or mineraloids. Reflectance spectra of iron-rich tailing materials are shown. Also shown are spectra of hematite and goethite. The broad bandwidth and long band center (near 1 micron) of the Fe(3+) crystal-field band of the iron-rich sediment samples combined with the lack of features on the Fe(3+) -O(2-) charge transfer absorption edge indicates that the ferric oxide and/or oxyhydroxide in these sediments is poorly crystalline to amorphous in character. Similar features are seen in poorly crystalline basaltic weathering products (e.g., palagonites). The problem of mapping and analyzing the downriver occurrences of iron

Mineralogical and micro-thermometric features of the Los Humeros geothermal reservoir, Pue., Mexico; Caracteristicas mineralogicas y microtermometricas del yacimiento geotermico de Los Humeros, Pue., Mexico

Energy Technology Data Exchange (ETDEWEB)

Izquierdo, Georgina; Arellano, Victor M; Aragon, Alfonso [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: gim@iie.org.mx

2008-07-15

Studies on many topics have been undertaken during the exploratory and exploitation stages of the development of Los Humeros geothermal field. From a geochemical and mineralogical view-including hydrothermal mineralogy and fluid-inclusion micro-thermometry, features have been reported differing from those observed in other geothermal fields. Sometimes this has led to ambiguous conclusions. Studies of fluid-inclusion micro-thermometry have shown low-salinity and high-temperature fluids, suggesting a slight temperature decrease in the deepest portion associated with a boiling process rather than a cooling process. In 1998, Arellano et al. performed a multi-disciplinary study and proposed the existence of at least two, distinct reservoirs at depth. Mineralogical data from wells drilled at the Colapso Central zone tend to support this idea. However wells drilled in the zone known as Corredor Mastaloya seemingly show evidence of a single reservoir. [Spanish] Durante las etapas de exploracion y explotacion del campo geotermico de Los Humeros se han realizado diversos estudios cubriendo distintos topicos. Desde el punto de vista geoquimico y mineralogico (mineralogia hidrotermal y microtermometria de inclusiones fluidas) se han reportado comportamientos diferentes a los observados en otros campos del mundo, los que en ocasiones han llevado a conclusiones imprecisas. La microtermometria de inclusiones fluidas ha mostrado fluidos poco salinos de alta temperatura, asi como una ligera disminucion de temperatura en la parte profunda la cual se asocia a un proceso de ebullicion mas que a un enfriamiento del sistema. En 1998 Arellano et al realizaron un estudio multidisciplinario proponiendo la existencia de al menos dos reservorios. La informacion mineralogica de pozos perforados en la zona del Colapso Central fortalece esta propuesta. Sin embargo, para pozos localizados en la zona conocida como Corredor Mastaloya se tiene evidencia de lo que parece ser un solo yacimiento.

Mineralogia e fontes de potássio em solos no Rio Grande do Sul cultivados com arroz irrigado

Directory of Open Access Journals (Sweden)

R. M. Castilhos

2002-09-01

Full Text Available Estudos desenvolvidos com arroz irrigado por inundação no estado do Rio Grande do Sul têm evidenciado ausência de resposta desta cultura à adubação potássica, mesmo em solos com baixo teor de potássio disponível. Este trabalho objetivou verificar a contribuição da mineralogia destes solos como fonte potencial de potássio para a cultura do arroz. Para tal, selecionaram-se quatro solos representativos das zonas orizícolas do estado do Rio Grande do Sul (Planossolo Hidromórfico, Planossolo Háplico, Gleissolo Háplico e Chernossolo Ebânico cultivados com arroz irrigado. Estes solos apresentam baixos teores de potássio trocável e não apresentam respostas à adubação potássica. Nas amostras dos horizontes A e B dos quatro solos, foram analisadas a granulometria e a composição química. A mineralogia das frações areia, silte e argila foi identificada por difratometria de raios-X. Os principais minerais fontes de potássio foram os seguintes: na fração areia, feldspatos e micas; nas frações silte e argila, feldspatos, micas, esmectitas e esmectitas com hidróxi-alumínio entrecamadas. A quantidade de potássio total, nas frações granulométricas, diferiu entre os solos. As frações silte e argila apresentaram os maiores teores de K-total, exceto para o Planossolo Háplico, que revelou maior reserva de potássio na fração areia. A ausência, ou a baixa resposta, à adubação potássica na cultura do arroz irrigado nesses quatro solos pode ser explicada pelos minerais fontes de potássio que ocorrem nesses solos.

Mineralogy and characterization of deposited particles of the aero sediments collected in the vicinity of power plants and the open pit coal mine: Kolubara (Serbia).

Science.gov (United States)

Cvetković, Željko; Logar, Mihovil; Rosić, Aleksandra

2013-05-01

In this paper, particular attention was paid to the presence of aerosol solid particles, which occurred mainly as a result of exploitation and coal combustion in the thermal power plants of the Kolubara basin. Not all of the particles created by this type of anthropogenic pollution have an equal impact on human health, but it largely depends on their size and shape. The mineralogical composition and particle size distribution in the samples of aero sediments were defined. The samples were collected close to the power plant and open pit coal mine, in the winter and summer period during the year 2007. The sampling was performed by using precipitators placed in eight locations within the territory of the Lazarevac municipality. In order to characterize the sedimentary particles, several methods were applied: microscopy, SEM-EDX and X-ray powder diffraction. The concentration of aero sediments was also determined during the test period. Variety in the mineralogical composition and particle size depends on the position of the measuring sites, geology of the locations, the annual period of collecting as well as possible interactions. By applying the mentioned methods, the presence of inhalational and respiratory particles variously distributed in the winter and in the summer period was established. The most common minerals are quartz and feldspar. The presence of gypsum, clay minerals, calcite and dolomite as secondary minerals was determined, as well as the participation of organic and inorganic amorphic matter. The presence of quartz as a toxic mineral has a particular impact on human health.

Iron Mineralogy and Speciation in Clay-Sized Fractions of Chinese Desert Sediments

Science.gov (United States)

Lu, Wanyi; Zhao, Wancang; Balsam, William; Lu, Huayu; Liu, Pan; Lu, Zunli; Ji, Junfeng

2017-12-01

Iron released from Asian desert dust may be an important source of bioavailable iron for the North Pacific Ocean and thereby may stimulate primary productivity. However, the Fe species of the fine dusts from this source region are poorly characterized. Here we investigate iron species and mineralogy in the clay-sized fractions (iron phases (ferrihydrite and lepidocrocite) and reducible iron oxides (dominated by goethite) are 0.81 wt % and 2.39 wt %, respectively, and Fe dissolved from phyllosilicates extracted by boiling HCl (dominated by chlorite) is 3.15 wt %. Dusts originating from deserts in northwestern China, particularly the Taklimakan desert, are relatively enriched in easily reducible Fe phases, probably due to abundant Fe contained in fresh weathering products resulting from the rapid erosion associated with active uplift of mountains to the west. Data about Fe speciation and mineralogy in Asian dust sources will be useful for improving the quantification of soluble Fe supplied to the oceans, especially in dust models.

The Morro do Resende orthogneiss: mineralogy, petrography, geochemistry and geochronology; Ortognaisse Morro do Resende: mineralogia, petrografia, geoquimica e geocronologia

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Fabiana Franco de; Avila, Ciro Alexandre; Bongiolo, Everton Marques; Camara, Beatriz de Oliveira; Menezes, Victor Hugo Riboura; Cunha, Fernanda Caetano de Mattos, E-mail: fma3003@globo.com, E-mail: avila@mn.ufrj.br, E-mail: ebongiolo@geologia.ufrj.br, E-mail: camara_b@hotmail.com, E-mail: vmenezes92@gmail.com, E-mail: fefemattos@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Neumann, Reiner, E-mail: reiner.neumann@gmail.com [Centro de Tecnologia Mineral (CETEM), Rio de Janeiro, RJ (Brazil); Teixeira, Wilson; Barbosa, Natali, E-mail: wteixeir@usp.br, E-mail: natali@usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Instituto de Geociencias

2017-01-15

The Morro do Resende orthogneiss is a hololeucocratic to leucocratic, fine-grained body with monzogranitic to granodioritic composition, cropping out near the Volta Grande mine in Nazareno County, State of Minas Gerais, Brazil. It bears xenoliths of metamafic rocks of the Rio das Mortes metavolcano-sedimentary sequence and yields a U-Pb SHRIMP crystallization age of 2174 ± 4 Ma, relating it to one of the magmatic pulses of the Mineiro Belt. The primary mineralogy includes quartz, albite, microcline, biotite, allanite, zircon, magnetite, titanite and apatite, while sericite, epidote, zoisite, clinozoisite, carbonate and chlorite are metamorphic minerals. Maghemite, barite, fluorite, monazite, xenotime, garnet and REE fluorides (possibly gagarinite) are hydrothermal, as they fill the fractures, intergrow or replace the primary and metamorphic minerals. Fluid interaction was not homogeneous throughout the body. Metamorphic paragenesis points to greenschist facies conditions, which could be related to the Paleoproterozoic II event of the Mineiro Belt, which lasted from 2131 to 2101 Ma. The Morro do Resende orthogneiss is distinguished by significant REE enrichment, as well as a negative Eu anomaly linked to the magmatic crystallization and a negative Ce anomaly related to oxidizing hydrothermal fluids circulation. (author)

Size, surface texture, chemical composition and mineralogy interrelations in ferromanganese nodules of central Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Banakar, V.K; Pattan, J.N.; Jauhari, P.

Fiftyseven ferromanganese nodules, classified into 3 size class (4,4-6 and 6-8 cm diam.), from the siliceous sediments of central Indian Ocean were analysed for transition metals and representative sample from each size class for mineralogy. Smaller...

Mineralogical Results from the Mars Science Laboratory Rover Curiosity

Science.gov (United States)

Blake, David Frederick.

2017-01-01

NASA's CheMin instrument, the first X-ray Diffractometer flown in space, has been operating on Mars for nearly five years. CheMin was first to establish the quantitative mineralogy of the Mars global soil (1). The instrument was next used to determine the mineralogy of a 3.7 billion year old lacustrine mudstone, a result that, together with findings from other instruments on the MSL Curiosity rover, documented the first habitable environment found on another planet (2). The mineralogy of this mudstone from an ancient playa lake was also used to derive the maximum concentration of CO2 in the early Mars atmosphere, a surprisingly low value that calls into question the current theory that CO2 greenhouse warming was responsible for the warm and wet environment of early Mars. CheMin later identified the mineral tridymite, indicative of silica-rich volcanism, in mudstones of the Murray formation on Mt. Sharp. This discovery challenges the paradigm of Mars as a basaltic planet and ushers in a new chapter of comparative terrestrial planetology (3). CheMin is now being used to systematically sample the sedimentary layers that comprise the lower strata of Mt. Sharp, a 5,000 meter sequence of sedimentary rock laid down in what was once a crater lake, characterizing isochemical sediments that through their changing mineralogy, document the oxidation and drying out of the Mars in early Hesperian time.

Mineralogy

International Nuclear Information System (INIS)

Klein, C.

2006-01-01

The classic in the field since 1848, this extraordinary reference offers readers unsurpassed coverage of mineralogy and crystallography. The book is known for integrating complete coverage of concepts and principles with a more systematic and descriptive treatment of mineralogy. The revised edition now includes a CD-ROM to let readers see the minerals and crystals, while also viewing chemical composition, symmetry, and morphological crystallography.

Lithological and mineralogical changes observed in a core from the western Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Reddy, N.P.C.; Rao, K.M.; Putra, S.V.S; Rao, Ch.M.

Lithological and mineralogical studies were carried out on sediments from a 650 cm long core from the north western Bay of Bengal at a depth of 2700 m. These studies demarcate a boundary at 380 cm designated as unit 1 from 0-380 cm and unit 2 from...

Mineralogy and petrography of Caithness Flagstones used in sorption experiments by Harwell Laboratories

International Nuclear Information System (INIS)

Bloodworth, A.J.; Kemp, S.J.; Inglethorpe, S.D.J.; Morgan, D.J.

1989-03-01

The mineralogy and petrography of a suite of samples taken from the Caithness Flagstones are described. Samples were collected from core material obtained from a borehole beneath DNE Dounreay, Highland Region, and are duplicates of those used in sorption experiments by Harwell Laboratories. The geological background of the samples is described, with particular emphasis on the development of lithologically distinct facies within the laminated lacustrine sediments examined in this study. Optical examination reveals distinctive sedimentary structures and petrofabrics associated with different lithofacies. Lithofacies type is also reflected in mineralogical variation within the sequence. Highly-laminated, deeper-water facies rocks are typified by the presence of ferroan-dolomite cement, with relatively high clay and organic matter contents. Detrital quartz and feldspar are more abundant in the shallow water facies and the carbonate assemblage in these rocks is dominated by calcite. Though total clay content varies with facies, the distribution of clay mineral species remains largely identical. There is a complex pattern of carbonate and pyrite diagenesis within these sediments. (author)

Hydrothermal alteration of sediments associated with surface emissions from the Cerro Prieto geothermal field

Energy Technology Data Exchange (ETDEWEB)

Valette-Silver, J.N.; Esquer P., I.; Elders, W.A.; Collier, P.C.; Hoagland, J.R.

1981-01-01

A study of the mineralogical changes associated with these hydrothermal vents was initiated with the aim of developing possible exploration tools for geothermal resources. The Cerro Prieto reservoir has already been explored by extensive deep drilling so that relationships between surface manifestations and deeper hydrothermal processes could be established directly. Approximately 120 samples of surface sediments were collected both inside and outside of the vents. The mineralogy of the altered sediments studied appears to be controlled by the type of emission. A comparison between the changes in mineralogy due to low temperature hydrothermal activity in the reservoir, seen in samples from boreholes, and mineralogical changes in the surface emission samples shows similar general trends below 180 C: increase of quartz, feldspar and illite, with subsequent disappearance of kaolinite, montmorillonite, calcite and dolomite. These mineral assemblages seem to be characteristic products of the discharge from high intensity geothermal fields.

Influence of Chemical, Physical, Biological and Geochemical Processes of Early Diagenesis and Material Exchange Across the Sediment/Seawater Interface in Margin Sediments

National Research Council Canada - National Science Library

Kastner, Miriam

1997-01-01

.... To this end, we provided high resolution characterizations of sediment microfabric, physical properties, chemistry, mineralogy, and organic matter content as well as theoretical work on smectite interlayer hydration...

Characterisation of some Clays Used for Whiteware Ceramics I. Mineralogical composition

Directory of Open Access Journals (Sweden)

Marcel Benea

2002-04-01

Full Text Available In order to obtain a semiquantitative mineralogical composition of raw materials used for whiteware ceramics, four different clay types were analysed by X-ray diffraction. Studies were carried out by using a combination of analyses of the bulk sample, and of the fine fraction. Using a well-established pre-treatment methodology (use of chemicals, ultrasonic treatment, dispersion procedures, clay mineral concentration by centrifugation and sedimentation, oriented and random powder preparation, cation saturation, expansion/dehydration methods, 12 X-ray diffractometer traces were obtained from each sample. Based on these informations it was possible to establish the qualitative mineralogical composition, and also a semiquantitative one using peak intensities and peak area corrected by various factors. Scanning electron microscopy was also used in order to illustrate the identified mineral phases.

Lime stabilization of fine-grained sediments in western Greenland

DEFF Research Database (Denmark)

Jørgensen, Anders Stuhr; Ingeman-Nielsen, Thomas; Skels, Peteris

2011-01-01

Thick deposits of fine-grained marine sediments exist in large areas of western Greenland. Many places these sediments are located above sea-level, and now complicate construction projects in urban areas. The mineralogy of the fine-grained sediments is very different from European sediments, mainly...... due to the cold climate, and it is therefore of great interest to study possible methods to improve the stability and strength properties. This project includes laboratory studies of lime stabilization on fine-grained marine sediments from Kangerlussuaq, western Greenland. The results have included...

Metal diagenesis and transport in coastal sediments around Penang Island, Malaysia

International Nuclear Information System (INIS)

Abd Khalik Wood; Zaharudin Ahmad; Noor Azhar Md Shazili; Rosnan Yaakob; Carpenter, R.

2004-01-01

Spatial and temporal variations in concentrations of several metals and isotopes in sediment cores from around Penang Island, an area with economically important biological resources off the northwest coast of peninsular Malaysia, are reported. Because of a typical, monazite rich mineralogy in surrounding drainage basins, sedimentary metal enrichment factors relative to global average materials, enrichment factors (EFs) of >1.0 do not always indicate significant anthropogenic metal inputs. Because of extensive metal solubilization in the hot, organic carbon rich area, EFs of < 1.0 may be observed for several metals despite significant anthropogenic contributions. Comparison of metal-Al relationships in Penang area surface sediments with those in nearby and presumed uncontaminated Strait of Malacca sediments more accurately correct for atypical regional solubilization and mineralogical effects than comparison to global average materials. Such comparisons show concentrations of Cd, Cu, Pb, Ni, Cr, As, Sb, Zn and V have changed by less than a factor of two by anthropogenic discharges. Sedimentary concentration profiles of Pb, Zn and Cu, ratioed to Sc to normalize for variations in grain size and mineralogy, have subsurface maxima suggestive of modest and recently reduced anthropogenic inputs. Mn, U, As and Sb have Sc-normalized concentration profiles clearly affected by digenetic processes. Sc-normalized profiles of Cr, Th, Ce and Sm show only small changes with depth, confirming insignificant anthropogenic inputs and undetectable post depositional digenetic mobility. Excess 210-Pb activities and fluxes in Penang area sediments are limited by supply of this radionuclide, in contrast to sediments of both the northwestern USA. and Amazon continental shelves, where they are limited by particle scavenging reactions. 210-Pb activities in sediments of the shallow, dynamic Penang area often show erratic or unconvincing changes with depth that cannot be reliably modeled by

Major, trace and REE geochemistry of recent sediments from lower Catumbela River (Angola)

Science.gov (United States)

Vinha, Manuela; Silva, M. G.; Cabral Pinto, Marina M. S.; Carvalho, Paula Cristina S.

2016-03-01

The mineralogy, texture, major, trace and rare earth elements, from recent sediment samples collected in the lower Catumbela River, were analysed in this study to characterize and discuss the factors controlling its geochemistry and provide data that can be used as tracers of Catumbela River inputs to the Angolan continental shelf. The sediments are mainly sands and silty-sands, but sandy-silt also occurs and the mineralogy is composed of quartz, feldspar, phyllosilicates, magnetite, ilmenite and also carbonates when the river crosses limestones and marls in the downstream sector. The hydraulic sorting originates magnetite-ilmenite and REE-enriched minerals placers. The mineralogy of the sediments is controlled by the source rocks and the degree of chemical weathering is lower than erosion. The texture is mainly controlled by location. There is enrichment in all the analysed trace elements in the fine grained, clay minerals and Fe-oxy-hydroxides rich sediments, compared to the coarse grained and quartz plus feldspar rich ones. The coarse grained sediments (without the placers) are impoverished in ΣREE when compared with UCC and NASC compositions, while the fine grained sediments have ΣREE contents similar to UCC and NASC. The placers have ΣREE contents up to 959.59 mg/kg. The source composition is the dominant factor controlling the REE geochemistry of the analysed sediments as there is no difference in the (La/Yb)N, (La/Sm)N and (Gd/Yb)N ratios in coarse and fine grained sediments. The sorting of magnetite, ilmenite, zircon, throrite, thorianite, rutile and titanite explain the HREE/LREE enriched patterns of the coarse grained sediments.

Výzkum krasových sedimentů

Czech Academy of Sciences Publication Activity Database

Bosák, Pavel; Pruner, Petr

2014-01-01

Roč. 2014, č. 4 (2014), s. 12-15 ISSN 1210-9525 Institutional support: RVO:67985831 Keywords : karst * caves * speleology * karst sediments Subject RIV: DB - Geology ; Mineralogy http://abicko.avcr.cz/2014/04/06/index.html

Texture, mineralogy and geochemistry of the continental slope sediments in front of Los Tuxtlas, Gulf of Mexico, Mexico: implications on weathering, origin and depositional environments

Science.gov (United States)

Marca-Castillo, M. E.; Armstrong-Altrin, J.

2017-12-01

The textural analysis, mineralogy and geochemistry of two sediment cores recovered from the deep water zone of the southwestern part of the Gulf of Mexico ( 1666 and 1672 m water depth) were studied to infer the provenance and depositional behavior. The textural analysis revealed that both cores are dominated by silt, which occupy more than 50% in both samples and the clay occupy 40%. The petrographic analysis revealed remains of biogenic origin sediments and lithic fragments with an angular shape and low sphericity, indicating a low energy environment and therefore a low level of weathering in the sediment, which suggests that the sediments were not affected by transport and derived from a nearby source rock. In both cores quartz fragments were identified; also volcanic lithic and pyroxenes fragments, which are rocks of intermediate composition and are generally associated with the volcanic activity of the continental margins. SEM-EDS studies showed that the analysed samples have concentrations of minerals such as barite, gibbsite, kaolinite, grossular, magnetite, plagioclase and chlorite, which are probably derived from the mainland to the deep sea zone. In the trace element analysis it was observed a low Sc content, while Co, Ni, V and Cu are slightly enriched with respect to the upper continental crust; this enrichment is related to sediments from intermediate sources. The sediments are classified as shale in the log (SiO2 / Al2O3) - log (Fe2O / K2O) diagram. The fine particles of the shale indicate that a deposit occurred as a result of the gradual sedimentation due to relatively non-turbulent currents, which is consistent with the petrographic analysis. The geochemical features of major and trace elements suggest sediments were derived largely from the natural andesite erosion of coastal regions along the Gulf of Mexico. High values of Fe2O3 and MnO are observed in the upper intervals, reflecting the influence of volcanic sediments. The major element

Mineralogy and depositional sources of sedimentary interbeds beneath the Idaho National Engineering Laboratory; eastern Snake River Plain, Idaho

International Nuclear Information System (INIS)

Reed, M.F.

1994-01-01

Idaho State University, in cooperation with the U.S. Geological Survey, and the U.S. Department of Energy, collected 57 samples of sedimentary interbeds at 19 sites at the Idaho National Engineering Laboratory (INEL) for mineralogical analysis. Previous work by the U.S. Geological Survey on surficial sediments showed that ratios detrital of quartz, total feldspars, and calcite can be used to distinguish the sedimentary mineralogy of specific stream drainages at the INEL. Semi-quantitative x-ray diffraction analyses were used to determine mineral abundances in the sedimentary interbeds. Samples were collected from wells at the New Production Reactor (NPR) area, Idaho Chemical Processing Plant (ICPP), Test Reactor Area (TRA), miscellaneous sites, Radioactive Waste Management Complex (RWMC), Naval Reactors Facility (NRF), and Test Area North (TAN). Normalized mean percentages of quartz, feldspar, and carbonate were calculated from sample data sets at each site. Percentages for quartz, feldspar, and carbonate from the NPR, ICPP, TRA, miscellaneous sites, RWMC, and NRF ranged from 37 to 59, 26 to 40, and 5 to 25, respectively. Percentages for quartz, feldspar, and carbonate from wells at Test Area North (TAN) were 24, 10, and 66, respectively. Mineralogical data indicate that sedimentary interbed samples collected from the NPR, ICPP, TRA, miscellaneous sites, RWMC, and NRF correlate with surficial sediment samples from the present day Big Lost River. Sedimentary interbeds from TAN sites correlate with surficial sediment samples from Birch Creek. These correlations suggest that the sources for the sediments at and near the INEL have remained relatively consistent for the last 580,000 years. 12 refs., 4 figs., 3 tabs

Mineralogy of Fluvio-Lacustrine Sediments Investigated by Curiosity During the Prime Mission: Implications for Diagenesis

Science.gov (United States)

Rampe, Elizabeth B.; Morris, R. V.; Bish, D. L.; Vaniman, D. T.; Bristow, T. F.; Chipera, S. J.; Blake, D. F.; Ming, D. W.; Farmer, J. D.; Morrison, S. M.;

Mineralogy, morphology, and textural relationships in coatings on quartz grains in sediments in a quartz-sand aquifer

Science.gov (United States)

Zhang, Shouliang; Kent, Douglas B.; Elbert, David C.; Shi, Zhi; Davis, James A.; Veblen, David R.

2011-01-01

Mineralogical studies of coatings on quartz grains and bulk sediments from an aquifer on Western Cape Cod, Massachusetts, USA were carried out using a variety of transmission electron microscopy (TEM) techniques. Previous studies demonstrated that coatings on quartz grains control the adsorption properties of these sediments. Samples for TEM characterization were made by a gentle mechanical grinding method and focused ion beam (FIB) milling. The former method can make abundant electron-transparent coating assemblages for comprehensive and quantitative X-ray analysis and the latter technique protects the coating texture from being destroyed. Characterization of the samples from both a pristine area and an area heavily impacted by wastewater discharge shows similar coating textures and chemical compositions. Major constituents of the coating include Al-substituted goethite and illite/chlorite clays. Goethite is aggregated into well-crystallized domains through oriented attachment resulting in increased porosity. Illite/chlorite clays with various chemical compositions were observed to be mixed with goethite aggregates and aligned sub-parallel to the associated quartz surface. The uniform spatial distribution of wastewater-derived phosphorus throughout the coating from the wastewater-contaminated site suggests that all of the coating constituents, including those adjacent to the quartz surface, are accessible to groundwater solutes. Both TEM characterization and chemical extraction results indicate there is a significantly greater amount of amorphous iron oxide in samples from wastewater discharge area compared to those from the pristine region, which might reflect the impact of redox cycling of iron under the wastewater-discharge area. Coating compositions are consistent with the moderate metal and oxy-metalloid adsorption capacities, low but significant cation exchange capacities, and control of iron(III) solubility by goethite observed in reactive transport

Magnesium-rich minerals in sediment and suspended particulates of South Florida water bodies: implications for turbidity.

Science.gov (United States)

Harris, W G; Fisher, M M; Cao, X; Osborne, T; Ellis, L

2007-01-01

Fine sediments in shallow water bodies such as Lake Okeechobee are prone to resuspension. Predominantly inorganic "mud" sediment that covers approximately 670 km2 of the lake has been recognized as a persistent source of turbidity. The objective of this study was to determine if mineral components of sediments in Lake Okeechobee and water conveyances of the northern Everglades also occur as suspended sediment and hence constitute a potential abiotic contributor to turbidity. Sediment samples were collected from nine stations within the lake and eight locations north of Water Conservation Area 2A in the Everglades. Water samples were also collected at selected locations. The silt and clay mineralogy of sediment and suspended particles was determined using X-ray diffraction, thermogravimetry, scanning-electron microscopy, energy-dispersive X-ray elemental microanalysis, and high-resolution transmission-electron microscopy. Clay fractions of the lake sediment contained the Mg silicate minerals sepiolite and palygorskite, along with smectite, dolomite, calcite, and kaolinite. Sediment silt fractions were dominated by carbonates and/or quartz, with smaller amounts of Ca phosphates and sepiolite. Mineralogy of the mud sediment was similar to that reported for geologic phosphate deposits. This suggests that the mud sediment might have accumulated by stream transport of minerals from these deposits. Suspended solids and mud-sediment mineralogy were similar, except that smectite was more abundant in suspended solids. Everglade samples also contained Mg-rich minerals. The small size, low density, and fibrous or platy nature of the prevalent mud sediment minerals make them an abiotic, hydrodynamically sensitive source of persistent turbidity in a shallow lake. Mitigation efforts focused exclusively on P-induced biogeochemical processes do not address the origin or effects of these minerals. Ecological management issues such as turbidity control, P retention, geologic P input

Distribution of clay minerals in marine sediments off Chennai, Bay of Bengal, India: Indicators of sediment sources and transport processes .

Digital Repository Service at National Institute of Oceanography (India)

Veerasingam, S.; Venkatachalapathy, R.; Ramkumar, T.

Clay mineralogy, texture size and statistical analyses were carried out on surface sediments from the continental shelf of Chennai, Bay of Bengal, India. The purpose of this study is to characterize the clay mineral distribution and its relation...

Journal of Mineralogical and Petrological Sciences

Science.gov (United States)

Official journal of Japan Association of Mineralogical Sciences (JAMS), focusing on mineralogical and petrological sciences and their related fields. Journal of Mineralogical and Petrological Sciences (JMPS) is the successor journal to both “Journal of Mineralogy, Petrology and Economic Geology” and “Mineralogical Journal”. Journal of Mineralogical and Petrological Sciences (JMPS) is indexed in the ISI database (Thomson Reuters), the Science Citation Index-Expanded, Current Contents/Physical, Chemical & Earth Sciences, and ISI Alerting Services.

Sedimentary sources and processes in the eastern Arabian Sea: Insights from environmental magnetism, geochemistry and clay mineralogy

Directory of Open Access Journals (Sweden)

Kumar Avinash

2016-03-01

Full Text Available The spatial distribution patterns of surficial sediment samples from different sedimentary domains (shallow to deep-sea regions of the eastern Arabian Sea were studied using sediment proxies viz. environmental magnetism, geochemistry, particle size and clay mineralogy. Higher concentrations of magnetic minerals (high χlf were recorded in the deep-water sediments when compared with the shallow water sediments. The magnetic mineralogy of one of the shallow water samples is influenced by the presence of bacterial magnetite as evidenced from the χARM/χlf vs. χARM/χfd biplot. However, the other samples are catchment-derived. The high correlation documented for χlf, anhysteretic remanent magnetisation (χARM and isothermal remanent magnetisation (IRM with Al indicates that the deep-sea surficial sediments are influenced by terrigenous fluxes which have been probably derived from the southern Indian rivers, the Sindhu (the Indus and the Narmada-Tapti rivers. A lower Mn concentration is recorded in the upper slope sediments from the oxygen minimum zone (OMZ but a higher Mn/Al ratio is documented in the lower slope and deep-sea sediments. Clay minerals such as illite (24–48.5%, chlorite (14.1–34.9%, smectite (10.6–28.7% and kaolinite (11.9–27.5% dominate the sediments of shallow and deep-sea regions and may have been derived from different sources and transported by fluvial and aeolian agents. Organic carbon (OC data indicate a low concentration in the shallow/shelf region (well oxygenated water conditions and deeper basins (increased bottom-water oxygen concentration and low sedimentation rate. High OC concentrations were documented in the OMZ (very low bottom-water oxygen concentration with high sedimentation rate. The calcium carbonate concentration of the surface sediments from the continental shelf and slope regions (<1800 m up to the Chagos-Laccadive Ridge show higher concentrations (average = 58% when compared to deep basin

Grain surface features and clay mineralogy of the quaternary sediments from Western Deccan Trap Region, India, and their palaeoclimatic significance

Directory of Open Access Journals (Sweden)

Veena U. Joshi

2011-06-01

Full Text Available Quartz sand grains obtained from a deeply gullied topography along the banks of two tributaries of River Pravara in Maharashtra (India have been examined with a scanning electron microscope (SEM. Quartz grains have been selected after a heavy mineral separation and micro-photographs of each grain were taken at various angles and magnifications. The sediments reveal features resulting from mechanical grinding as well as from chemical alteration. Conchoidal fractures, cleavage planes, grooves, v-shaped indentations etc. are the mechanical features documented on the grains whereas solution pits of varying sizes and intensity, precipitation surfaces, oriented v-pits, solution crevasses and etching are the features of chemical origin. Several evidences indicate that the samples have undergone digenetic changes. Few grains show the features of intense chemical breakdown. The overall assemblages of the grain surface features suggest that the samples have been subjected to subaqueous transport for a considerable period of time. The minor chemical features such as solution pits or semi circular arcuate steps found in abundance on these grains are due to the dissolution of the sediments in a low energy fluviatile environment. For clay mineralogy, fractions between <2 and <0.2 mm were separated out from the sediments. The clay fractions were then subjected to examination by X-ray diffraction (XRD of oriented K/Ca saturated samples using a Philips Diffractometer and Ni-filtered Cu Ka radiation with the scanning speed of 10 2Ө min -1. The main clay minerals for all the samples are identical and show the presence of hydroxy-interlayered smectites with minor quantities of mica, kaolinite, smectites, quartz and feldspar. The first weathering product of the Deccan Basalt (DB is the dioctahedral smectite. Since the present semi aridic climatic condition of the study area can not transform a smectite to HIS and either smectite to kaolin, it is quite likely that

Clay mineralogy of selected borehole sediments from the Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore, California

International Nuclear Information System (INIS)

Smith, D.K.; Peifer, D.W.; Rood, C.K.

1992-04-01

Smectite, 90 to 100% interstratified illite-smectite, chlorate, and kaolinite are identified in boreholes drilled in fluvial and alluvial fan deposits of the Plio-Pleistocene Livermore Formation in the vicinity of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories (SNL), Livermore. X-ray diffraction, scanning electron microscopy, and electron microprobe studies indicate the clays persist through 150 ft of gravels, sands, silts, and mudstones of the vadose zone to total drilling depths of 200 ft in the saturated zone. Scanning electron microscopy indicates that true clays (layer silicate only) comprise between 2 and 15 modal percent of the Livermore Formation. Authigenic and detrital smectite, 90% interlayered illite-smectite, and chlorate persist throughout the stratigraphic section; kaolinite occurs only in the upper 100 ft of the section and is absent below. Smectite comprises between 60 to 90% of the true (layer silicate only) clay fraction. Illite and kaolinite±chlorite abundances fluctuate between 10 to 30% and 10 to 20% of this fraction, respectively. Authigenic smectite, illite, and chlorate crystallize together with detrital phases; the authigenic component increases with depth. The relative percentages of clay minerals define unique mineralogical intervals, which can be correlated between boreholes. Pervasive microfractures and interconnected porosity are inherent in the finer sediments; the microfractures typically are 1 mm or less in width and are variably spaced. Voids and microfractures are conspicuously lined by clays. Porosity for the argillaceous sediments ranges between 23 and 40%; Brunauer, Emmett, and Teller (BET) specific surface area decreases variably from 40 m 2 /g near the surface to 15 m 2 /g at the 115-ft depth. Within the pelitic matrix, iron, iron-titanium, chromium, and manganese oxides are pervasive

Seawater-sediment interaction at elevated temperatures and pressures: implications for the near field chemical environment

International Nuclear Information System (INIS)

Seyfried, W.E. Jr.; Thornton, E.C.; Janecky, D.R.

1981-01-01

Results of four experiments are reported which document chemical exchange and mineralogic modification during seawater-sediment interaction at 200 0 to 300 0 C, 500 bars. Sediments used for this study are from MPG-1 (central North Pacific). Experimental conditions (T, P, W/R) were chosen to be reasonably analogous to conditions which will characterize the near field environment; that is a zone within approximately 1 m of the buried waste canister. In general, the major element chemistry of seawater was similarly modified in all experiments. The aqueous concentrations of Ca, Mg, Sr, and SO 4 decreased and SiO 2 /sub (aq)/, Na, K, and ΣCO 2 increased relative to values in seawater prior to reaction with sediments. pH decreased and remained distinctly acid. Con comitantly significant concentrations of heavy metals entered seawater from the sediments during reaction. Dissolution of Mn-rich phases profoundly affected alteration processes. For example, reaction of MnO 2 components of the smectite-rich sediment (Pacific smectite) with seawater created an unusually oxidizing milieu (fO 2 = 10 -7 74 ), and resulted in dissolution of significant quantities of Au from the reaction cell. Although illite-quartz-Fe-chlorite (sediment B)-seawater interaction also created a relatively oxidizing environment, this environment was not capable of oxidizing Au. Thus, in this regard (oxidation potential) sediment mineralogy exerts a strong influence. Mineralogic modification of sediment B at 200 0 and 300 0 C was minor and characterized by partial dissolution of illite and exchange of Fe for Mg in chlorite. In contrast the smectite-rich sediment, which, prior to reaction with seawater contained a poorly crystalline smectite phase, clinoptilolite, and amorphous material, recrystallized totally to a well defined smectite mineral. Anhydrite was abundantly present amongst the alteration products of all experiments

Petrographic, mineralogical and geochemical characterization of the Serrinha coal waste pile (Douro Coalfield, Portugal) and the potential environmental impacts on soil, sediments and surface waters

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, J. [Centro de Geologia, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); Ferreira da Silva, E. [GeoBioTec, Geobiosciences, Geotechnologies and Geoengineering Research Center, Universidade de Aveiro, Campus de Santiago, 3810-193 Aveiro (Portugal); Li, Z.; Ward, C. [School of Biological, Earth and Environmental Sciences, University of New South Wales. Sydney, NSW 2052 (Australia); Flores, D. [Departamento de Geociencias, Ambiente e Ordenamento do Territorio, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal)

2010-09-01

Serrinha is the largest coal waste pile resulting from mining activities in the Douro Coalfield, Portugal. The exploitation of anthracite in tens of small mines caused some environmental impacts, as is the case of the coal waste piles that exist in old mines and adjacent areas. The Serrinha waste pile is essentially made up of 2 million tonnes of shales and carbonaceous shales, deposited in a topographical depression over about 30 years. Despite the environmental restoration accomplished in the Serrinha waste pile, some environmental problems seem to persist. In this study a petrographic, mineralogical and geochemical characterization was done in order to recognize and understand these problems. The materials studied were coal waste, sediments and waters from the drainage system and decanting basins, soils from the surrounding areas, leachates from waste material and neoformed minerals formed at the bottom of the waste pile. The main lithologies (carbonaceous shale and lithic arenite) and coal from the Douro Coalfield were also analyzed. Petrographic analysis shows some evidence of weathering (on organic and inorganic matter) related to the time of exposure to the weathering agents and the easy access of air within the waste pile (due to both the poor compaction and the heterogeneity of the material). Mineralogically, the composition of coal waste material has contributions from both the coal and the associated lithologies. R-type cluster analysis of the waste pile material allows two distinct clusters to be identified. In the first cluster a sulfide fraction is represented by the association of As, Cd, Cu, Pb, Ni and Zn, while Fe clustered with Al, Co, and Ti indicates that some of the Fe and the other elements are likely associated with silicate minerals such as clays. The second cluster, represented by Cr, V, Zr, Rb, REE, Mn, Li and Ba, probably represent a silicate fraction, perhaps detrital accessory minerals. The waste pile material, leachates, soils

Suprimento de potássio e mineralogia de solos de várzea sob cultivos sucessivos de arroz irrigado Potassim supply and mineralogy of lowland soils under consecutive cropping of flooded rice

Directory of Open Access Journals (Sweden)

Thiago Isquierdo Fraga

2009-06-01

Full Text Available A baixa capacidade de estimar a disponibilidade de K para o arroz irrigado, dos diferentes métodos, decorre da alta difusão desse nutriente em solos alagados e do suprimento de formas não trocáveis à planta pelo solo. Este trabalho foi desenvolvido com o objetivo de avaliar a capacidade de suprimento de formas trocáveis e não trocáveis de K por solos de várzea, com diferentes características mineralógicas, em cultivos sucessivos de arroz irrigado. O trabalho foi realizado em vasos (12 dm³, em casa de vegetação, utilizando três tipos de solo (Planossolo Háplico, Gleissolo Háplico e Neossolo Litólico representativos de diferentes regiões do Rio Grande do Sul, caracterizados quanto à textura e à mineralogia, onde ocorre baixa resposta à adubação potássica. Esses solos foram submetidos à adição ou não de K e a três cultivos sucessivos de arroz irrigado. As plantas foram cultivadas até o florescimento, com determinação do teor de K no tecido vegetal e do teor desse nutriente trocável no solo (Mehlich-1 antes e após os cultivos. Os solos se diferenciaram na capacidade de suprir o arroz irrigado com K, havendo uma contribuição importante de formas não trocáveis. A capacidade de suprimento em curto prazo (primeiro cultivo foi condicionada pelo teor de K trocável do solo e com o passar do tempo (segundo e terceiro cultivos, predominantemente pela saturação de K na capacidade de troca de cátions (K/CTCpH 7,0 e pelo suprimento de formas não trocáveis, especialmente de feldspatos potássicos, esmectita e esmectita com hidróxi-Al entrecamadas, em quantidades distintas nas frações analisadas.The low capacity to predict potassium (K availability for rice by different evaluation methods is due to the greater potassium diffusion in the flooded soil solution and to potassium supply through non-exchangeable forms in the soil. The purpose of this study was to evaluate the supply capacity of exchangeable and non

Radionuclide interactions with marine sediments

International Nuclear Information System (INIS)

Higgo, J.J.W.

1987-09-01

A critical review of the literature on the subject of the interactions of radionuclides with marine sediments has been carried out. On the basis of the information available, an attempt has been made to give ranges and 'best estimates' for the distribution ratios between seawater and sediments. These estimates have been based on an understanding of the sediment seawater system and the porewater chemistry and mineralogy. Field measurements, laboratory measurements and estimates based on stable-element geochemical data are all taken into account. Laboratory measurements include distribution-ratio and diffusion-coefficient determinations. The elements reviewed are carbon, chlorine, calcium, nickel, selenium, strontium, zirconium, niobium, technetium, tin, iodine, caesium, lead, radium, actinium, thorium, protactinium, uranium, neptunium, plutonium, americium and curium. (author)

Novel imaging techniques, integrated with mineralogical, geochemical and microbiological characterizations to determine the biogeochemical controls on technetium mobility in FRC sediments

Energy Technology Data Exchange (ETDEWEB)

Jonathan R. Lloyd

2009-02-03

-200 MBq; half life 6 hours) and its mobility was monitored using a {gamma}-camera. Incorporation of low concentrations of the long-lived 99Tc gave a tracer that can be followed by scintillation counting, should the metastable form of the radionuclide decay to below detection limits before the end of the experiment (complete immobilization or loss of the Tc from the column). After the Tc was reduced and immobilized, or passed through the system, the columns were dismantled carefully in an anaerobic cabinet and the pore water geochemistry and mineralogy of the columns profiled. Microbial community analysis was determined, again using molecular and culture-dependent techniques. Experimental results were also modeled using an established coupled speciation and transport code, to develop a predictive tool for the mobility of Tc in FRC sediments. From this multidisciplinary approach, we hoped to obtain detailed information on the microorganisms that control the biogeochemical cycling of key elements at the FRC, and we would also be able to determine the key factors that control the mobility of Tc at environmentally relevant concentrations at this site.

Late Quaternary sedimentation in eastern Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Chauhan, O.S; Mascarenhas, A; Paropkari, A; Rao, Ch.M.

This study presents variations in various size measures, calcium carbonate, organic carbon, clay mineralogy and major and trace elements in a core (5.40 m long, 2713 m depth) from the eastern Bay of Bengal. On a CM diagram, the sediments of the core...

A Guide for Using Geochemical Methods in Dredged Material, Sediment Tracking, and Sediment Budget Studies

Science.gov (United States)

2017-06-26

geochemical markers such as radioisotopes and stable isotopes, organic matter, and mineralogy/elemental composition are recognized and established methods ...further elucidate the original erosion source of accumulating sediment (Hoefs 2009). 2.3 Radioisotopes Radioisotopic dating is based on measuring the...ER D C TR -1 7- 3 Dredging Operations and Environmental Research Program A Guide for Using Geochemical Methods in Dredged Material

Caracterização química e mineralogia de solos antrópicos (terras pretas de índio na amazônia central

Directory of Open Access Journals (Sweden)

Francisco Weliton Rocha Silva

2011-06-01

Full Text Available Na Amazônia brasileira é comum a ocorrência de sítios arqueológicos. Frequentemente, observa-se que as ações humanas nesses sítios promoveram modificações significativas em muitas das características físicas, morfológicas e químicas dos solos desses ambientes, tornando-os muito diferentes dos solos adjacentes, especialmente nas áreas de terra firme da região. Embora muitos estudos tenham sido conduzidos visando compreender a magnitude dessas modificações e seus reflexos na gênese dos solos influenciados, muitas questões precisam ser mais bem compreendidas, sobretudo as relacionadas com a mineralogia desses solos. Este estudo teve como objetivo avaliar as características químicas, a composição mineralógica das frações argila e areia e o grau de pedogênese de cinco perfis de solos com horizonte A antrópico (Au, em ambientes de terra firme e várzea, localizados na Bacia Sedimentar do Amazonas, entre Coari e Manaus-AM. Amostras de solos foram coletadas, preparadas e submetidas às análises químicas de rotina e caracterizadas quanto aos teores de carbono oxidável e aos teores de Si, Fe, Al e P; adicionalmente, efetuou-se a identificação dos minerais presentes nas frações argila e areia, por meio de difratometria de raios X. Os resultados mostraram que as modificações promovidas pela atividade humana levaram à melhoria da fertilidade do solo, resultando em solos com acidez moderada, elevados teores de Ca2+ e de P disponíveis e baixos teores de Al3+ trocável. Esses resultados também revelaram teores muito elevados de P-total nos horizontes antrópicos, variando entre 1.630 e 8.840 mg kg-1 de P2O5. A mineralogia da fração argila dos solos antrópicos de terra firme revelou dominância de caulinita, além da ocorrência de gibbsita, de goethita e de óxidos de titânio (anatásio. O perfil de várzea, além de caulinita e goethita, apresentou também minerais do tipo 2:1 na fração argila. A mineralogia da

Terrestrial Sediments of the Earth: Development of a Global Unconsolidated Sediments Map Database (GUM)

Science.gov (United States)

Börker, J.; Hartmann, J.; Amann, T.; Romero-Mujalli, G.

2018-04-01

Mapped unconsolidated sediments cover half of the global land surface. They are of considerable importance for many Earth surface processes like weathering, hydrological fluxes or biogeochemical cycles. Ignoring their characteristics or spatial extent may lead to misinterpretations in Earth System studies. Therefore, a new Global Unconsolidated Sediments Map database (GUM) was compiled, using regional maps specifically representing unconsolidated and quaternary sediments. The new GUM database provides insights into the regional distribution of unconsolidated sediments and their properties. The GUM comprises 911,551 polygons and describes not only sediment types and subtypes, but also parameters like grain size, mineralogy, age and thickness where available. Previous global lithological maps or databases lacked detail for reported unconsolidated sediment areas or missed large areas, and reported a global coverage of 25 to 30%, considering the ice-free land area. Here, alluvial sediments cover about 23% of the mapped total ice-free area, followed by aeolian sediments (˜21%), glacial sediments (˜20%), and colluvial sediments (˜16%). A specific focus during the creation of the database was on the distribution of loess deposits, since loess is highly reactive and relevant to understand geochemical cycles related to dust deposition and weathering processes. An additional layer compiling pyroclastic sediment is added, which merges consolidated and unconsolidated pyroclastic sediments. The compilation shows latitudinal abundances of sediment types related to climate of the past. The GUM database is available at the PANGAEA database (https://doi.org/10.1594/PANGAEA.884822).

Geochemistry and mineralogy of recent sediments of Guanabara Bay (NE sector and its major rivers - Rio de Janeiro State - Brazil

Directory of Open Access Journals (Sweden)

MARCIA DE MELO FARIA

2001-03-01

Full Text Available Geochemical and clay mineralogical studies of bottom sediments collected along the Macacu and Caceribu rivers and Guanabara Bay were carried out in order to investigate the relationship between major source areas and recent sediments of the bay. Clay mineralogy includes different groups with selective distribution conditioned by geomorphic features and depositional settings. Micaceous clay minerals are abundant near parent rock in the upper course, whereas kaolinite derived from varied sources is gradually concentrated towards the estuary. In the Guanabara Bay, kaolinite accumulates near river mouths, while micaceous clay minerals are converted into mixed layers in the estuary. Analyses of heavy metal contents reveal higher levels of Zn and Cu in sediments of the bay than in river sediments. Profiles along rivers indicate a downstream decrease of heavy metals, whereas in the bay geochemical trends display greater variations. In general river mouth sediments present the lowest concentrations. At the north and east of Paquetá Island anomalous areas with the highest heavy metal contents occur. Cu tends to concentrate in A correlação dos sedimentos recentes da Baía de Guanabara com as suas principais áreas-fontes foi realizada a partir de análises geoquímicas e de argilominerais em amostras de fundo coletadas ao longo dos rios Macacu e Caceribu e na baía. Os argilominerais indicam uma distribuição seletiva intimamente associada às características do relevo e aos ambientes deposicionais. Os argilominerais micáceos são predominantes na região do alto curso próximos à área-fonte primária, enquanto que a caulinita, proveniente da decomposição de diversos minerais, se concentra gradativamente em direção ao estuário. Na Baía de Guanabara observa-se um acúmulo de caulinita na região de foz dos rios, ao passo que os argilominerais micáceos são convertidos em interestratificados e depositados no fundo da baía. As análises geoqu

Process recognition in multi-element soil and stream-sediment geochemical data

Science.gov (United States)

Grunsky, E.C.; Drew, L.J.; Sutphin, D.M.

2009-01-01

Stream-sediment and soil geochemical data from the Upper and Lower Coastal Plains of South Carolina (USA) were studied to determine relationships between soils and stream sediments. From multi-element associations, characteristic compositions were determined for both media. Primary associations of elements reflect mineralogy, including heavy minerals, carbonates and clays, and the effects of groundwater. The effects of groundwater on element concentrations are more evident in soils than stream sediments. A "winnowing index" was created using ratios of Th to Al that revealed differing erosional and depositional environments. Both soils and stream sediments from the Upper and Lower Coastal Plains show derivation from similar materials and subsequent similar multi-element relationships, but have some distinct differences. In the Lower Coastal Plain, soils have high values of elements concentrated in heavy minerals (Ce, Y, Th) that grade into high values of elements concentrated into finer-grain-size, lower-density materials, primarily comprised of carbonates and feldspar minerals (Mg, Ca, Na, K, Al). These gradational trends in mineralogy and geochemistry are inferred to reflect reworking of materials during marine transgressions and regressions. Upper Coastal Plain stream-sediment geochemistry shows a higher winnowing index relative to soil geochemistry. A comparison of the 4 media (Upper Coastal Plain soils and stream sediments and Lower Coastal Plain soils and stream sediments) shows that Upper Coastal Plain stream sediments have a higher winnowing index and a higher concentration of elements contained within heavy minerals, whereas Lower Coastal Plain stream sediments show a strong correlation between elements typically contained within clays. It is not possible to calculate a functional relationship between stream sediment-soil compositions for all elements due to the complex history of weathering, deposition, reworking and re-deposition. However, depending on

Grain size distribution, clay mineralogy and chemistry of bottom sediments from the outer Thermaikos Gulf, Aegean Sea, Greece

Directory of Open Access Journals (Sweden)

K.G. PEHLIVANOGLOU

2004-06-01

Full Text Available The Thermaikos Gulf constitutes the NW part of the North Aegean Sea and is limited eastward from the Chalkidiki Peninsula and westward from the Pieria Prefecture. Its plateau covers an area of 3,500 km2. The mechanisms responsible for the grain size distribution into the Gulf, the clay mineralogy and the chemistry of some bottom sediments from the outer Thermaikos Gulf, are examined. Source mixing during transportation, flocculation, differential settling processes and organic matter appear to be the main mechanisms for the distribution of clay minerals in shallow waters. All grain size fractions studied present a wide range of values confirming the extreme variations of the discharged load and the variability in marine processes. Plagioclases predominate over K-feldspars, while quartz is the most abundant mineral present. In addition, micas, chlorites, amphiboles and pyroxenes exist as primary and/or accessory minerals in all samples. Among clay minerals, illite predominates over smectite and smectite over chlorite (+ kaolinite. The ordered interstratified phase of I/S, with 30-35% S layers, is present in the 2-0.25µm fraction. The randomly interstratified phase of I/S, with 50% S layers, is present in the <0.25& micro; m fraction. On average the clay mineral content of the studied samples is: 48% I, 23% S, 17% Ch (+K and 12% others for the 2-0.25µm fraction and 50% I, 30% S and 20% Ch (+K for the <0.25 µm fraction. All these minerals are the weathering products of the rocks from the drainage basins of the rivers flowing into the Gulf, as well as of the Neogene and Quaternary unconsolidated sediments of the surrounding coasts. The terrigenous input, the water mass circulation and, to a lesser extent, the quality of the discharged material and the differential settling of grains, control the grain size distribution within the outer Thermaikos Gulf. The chemical composition of the analysed samples is generally in agreement with their mineral

Parameters Controlling Sediment Composition of Modern and Pleistocene Jamaican Reefs

OpenAIRE

Boss, Stephen K.

1985-01-01

Recent carbonate sediments from Jamaican north coast fringing reefs display variation in constituent composition, texture, and mineralogy related to their location on the reef. Samples were collected along lines which traversed the back reef and fore reef (0.5m to 70m). The sediment is dominated by highly comminuted coral fragments, plates of the calcareous green alga, Halimeda, coralline algae, and the encrusting Foraminifera, Homotrema rubrum, with lesser amounts of other taxonomic group...

Mineralogy of the carbonate sediments - western continental shelf of India

Digital Repository Service at National Institute of Oceanography (India)

Nair, R.R.; Hashimi, N.H.

An X-ray diffraction study of forty-six sediment samples and three oolitic limestone samples from the western continental shelf of India shows that aragonite is the dominant carbonate mineral (99% maximum), followed by low-magnesium calcite (77...

Chromite Enrichment in the Recent Fluviatile Sediments, North Iraq

OpenAIRE

Al Juboury, Ali I. [علي اسماعيل الجبوري; Ismail, Sabah A.; Ghazal, Mohsin M.

1999-01-01

The Recent sediments from North Iraq are characterized by a higher content of chromite. This paper deals with the mineralogy and geochemistry of chromite in the heavy mineral assemblages from Recent fluvial sediments in an attempt to elucidate its distribution and source rock. The heavy fraction is composed of iron oxides and chromite forming about 50% of the total heavies. Chromite forms up to 80% of the opaque minerals at some areas in North Iraq. The non-opaque heavy minerals are composed ...

Mineralogical diversity and geology of Humboldt crater derived using Moon Mineralogy Mapper data

NARCIS (Netherlands)

Martinot, M.; Besse, S.; Flahaut, J.; Quantin-Nataf, C.; Lozac'h, L.; van Westrenen, W.

2018-01-01

Moon Mineralogy Mapper (M3) spectroscopic data and high-resolution imagery data sets were used to study the mineralogy and geology of the 207 km diameter Humboldt crater. Analyses of M3 data, using a custom-made method for M3 spectra continuum removal and spectral parameters calculation, reveal

Magnetic and mineralogical properties of central Baffin Bay sediments since the Last Glacial Maximum

Science.gov (United States)

Simon, Q.; St-Onge, G.; Hillaire-Marcel, C.

2011-12-01

Magnetic and mineralogical properties of terrigenous sediments from the deep central Baffin Bay (HU2008-029-016PC - 70°46,14N/-64°65,77W - 2063 m) were analyzed as a means of linking sedimentological changes to ice-margin dynamics along the surrounding coastlines of W. Greenland, E. Baffin Island and N.E. Ellesmere Island since the Last Glacial Maximum (LGM). A chronology based on relative paleointensity (RPI) and secular variation (PSV) in sections where magnetism properties were suitable has been set. The age-model yields a low mean sedimentation rate varying between 4 - 8 cm/kyr along the core and illustrates a significant increase during Termination 1. Carbonate content increases drastically from 16 ka due to increasing supplies of dolomitic material from dolostone rocks outcropping in the Canadian Arctic Archipelago and associated with inputs from the Innuitian Ice Sheet margin. The magnetic properties demonstrate major changes during the deglaciation and especially during Heinrich event 1 (H1), the Younger Dryas (YD) and throughout the Holocene. Very low median destructive field (MDF) of the natural remanent magnetization (NRM) values are observed during the 11.5 - 12.6 ka (YD) and 14.8 - 16 (H1) ka intervals, and are reflecting coarser magnetic grains. Similarly, the kARM/kLF grain-size ratio shows coarser magnetic grain size during the H1 and YD intervals, and finer magnetic grains during the LGM (19 - 22 ka). During the LGM, "glacial flour" formed by mechanical grinding of rocks by ice sheets released finer magnetic grains from lateral source (e.g., Greenland continental shelf). On the contrary, during the YD and H1 periods, icebergs released coarser magnetic grains from a northern source (axial source). The Holocene is marked by the highest median destructive field (MDF) and ARM20mT/ARM0mT values of the core, indicating an increased proportion of finer magnetic grains during this interval. Together with the large increase in the silt fraction, these

Novel imaging techniques, integrated with mineralogical, geochemical and microbiological characterizations to determine the biogeochemical controls on technetium mobility in FRC sediments. Final report

International Nuclear Information System (INIS)

Lloyd, Jonathan R.

2009-01-01

mobility was monitored using a γ-camera. Incorporation of low concentrations of the long-lived 99Tc gave a tracer that can be followed by scintillation counting, should the metastable form of the radionuclide decay to below detection limits before the end of the experiment (complete immobilization or loss of the Tc from the column). After the Tc was reduced and immobilized, or passed through the system, the columns were dismantled carefully in an anaerobic cabinet and the pore water geochemistry and mineralogy of the columns profiled. Microbial community analysis was determined, again using molecular and culture-dependent techniques. Experimental results were also modeled using an established coupled speciation and transport code, to develop a predictive tool for the mobility of Tc in FRC sediments. From this multidisciplinary approach, we hoped to obtain detailed information on the microorganisms that control the biogeochemical cycling of key elements at the FRC, and we would also be able to determine the key factors that control the mobility of Tc at environmentally relevant concentrations at this site.

Spatial variability of the physical and mineralogical properties of the soil from the areas with variation in landscape shapes

Directory of Open Access Journals (Sweden)

Zigomar Menezes de Souza

2009-04-01

Full Text Available The objective of this work it was to use the geostatistics methods to investigate the spatial relationships between the physical and mineralogical properties of an oxisol planted with the sugarcane in an area of slight variations in the landform. The soil was sampled at 10 m regular intervals in the crossing points of a 100 x 100 m grid. At each point, the soil was collected at 0.0-0.2 m, 0.2-0.4 m and 0.4-0.6 m depths for the analyzes of physical properties and at 0.6-0.8 m for the mineralogical analyses. Both the Kt/Kt+Gb ratio and Kt relative crystallization level were higher in the compartment I than in the compartment II. As a consequence, the soil penetration resistance and bulk density were higher in the compartment I, while the macroporosity and Ksat were lower. Therefore, it was concluded that both the identification and mapping of a landform were efficient for understanding the spatial variability of the soil properties. Moreover, variations in the landscape shape promoted the differentiated variability of the physical and mineralogical soil properties: the more variable the landscape, the more variable was the soil properties.Este trabalho teve como objetivo avaliar a influência das formas do relevo na variabilidade espacial de atributos físicos e suas relações com a mineralogia da argila de um Latossolo Vermelho eutroférrico, utilizando a técnica da geoestatística. Os solos foram amostrados nos pontos de cruzamento de uma malha, com intervalos regulares de 10 m, nas profundidades de 0,0-0,2 m, 0,2-0,4 m e 0,4-0,6 m para os atributos físicos e 0,6-0,8 m para os atributos mineralógicos. Os valores médios para a densidade do solo e resistência do solo à penetração são maiores no compartimento I onde a relação Ct/Ct+Gb é relativamente maior, indicando a presença de maior teor de caulinita. No compartimento II a condutividade hidráulica e a macroporsidade são maiores, influenciados provavelmente pelo predomínio da

Reflectância espectral e mineralogia de materiais formados sobre diabásio Spectral reflectance and mineralogy of soil materials developed from diabase

Directory of Open Access Journals (Sweden)

Celso Augusto Clemente

2000-03-01

Full Text Available O presente estudo teve por objetivo caracterizar diferentes fases de intemperismo de um solo e relacioná-las com seu comportamento espectral. Um perfil pedológico desenvolvido sobre diabásio da região de Capivari-SP, foi descrito morfologicamente, identificando-se seis fases de alteração. Os atributos analisados foram granulometria, composição química e mineralógica. A reflectância espectral do solo foi avaliada em laboratório através de espectrorradiômetro na faixa de 300 a 2500 nm. O perfil apresentou grau de intemperismo moderado, o que foi evidenciado pela alta relação silte/argila observada abaixo do horizonte Bi. Os horizontes subsuperficiais também apresentaram alto teor de nutrientes, especialmente P, Ca e Mg, que estavam relacionados com a presença em subsuperfície de saprolito com razoável reserva de minerais intemperizáveis. A evolução dos minerais primários iniciou pela formação de óxidos de ferro e de argilas 2:1, como vermiculita ou vermiculita-esmectita, que foram transformadas em caulinita e gibbsita em direção ao topo do perfil. Na medida em que ocorreram alterações na composição mineralógica no perfil, foram verificadas variações nos dados espectrais. Basicamente a reflectância foi influenciada diferenciadamente pela ocorrência de óxidos de ferro, diferentes tipos de argilas e minerais primários como piroxênios e magnetita.The aim of this study was to characterize soil materials with different degrees of weathering and then associate their composition with their spectral behavior. One pedological profile developed from diabase was studied in Capivari-SP, Brazil. The morphological description allowed to separate six phases of rock-soil alteration. Afterwards, granulometry, chemical and mineralogical analysis were carried out. The soil spectral reflectance was evaluated with a laboratory spectroradiometer using the wavelength range of 300 to 2500 nm. The profile was moderately weathered as

Mineralogical Diversity and Geology of Humboldt Crater Derived Using Moon Mineralogy Mapper Data

Science.gov (United States)

Martinot, M.; Besse, S.; Flahaut, J.; Quantin-Nataf, C.; Lozac'h, L.; van Westrenen, W.

2018-02-01

Moon Mineralogy Mapper (M3) spectroscopic data and high-resolution imagery data sets were used to study the mineralogy and geology of the 207 km diameter Humboldt crater. Analyses of M3 data, using a custom-made method for M3 spectra continuum removal and spectral parameters calculation, reveal multiple pure crystalline plagioclase detections within the Humboldt crater central peak complex, hinting at its crustal origin. However, olivine, spinel, and glass are observed in the crater walls and rims, suggesting these minerals derive from shallower levels than the plagioclase of the central peak complex. High-calcium pyroxenes are detected in association with volcanic deposits emplaced on the crater's floor. Geologic mapping was performed, and the age of Humboldt crater's units was estimated from crater counts. Results suggest that volcanic activity within this floor-fractured crater spanned over a billion years. The felsic mineralogy of the central peak complex region, which presumably excavated deeper material, and the shallow mafic minerals (olivine and spinel) detected in Humboldt crater walls and rim are not in accordance with the general view of the structure of the lunar crust. Our observations can be explained by the presence of a mafic pluton emplaced in the anorthositic crust prior to the Humboldt-forming impact event. Alternatively, the excavation of Australe basin ejecta could explain the observed mineralogical detections. This highlights the importance of detailed combined mineralogical and geological remote sensing studies to assess the heterogeneity of the lunar crust.

Mineralogical Diversity and Geology of Humboldt Crater Derived Using Moon Mineralogy Mapper Data.

Science.gov (United States)

Martinot, M; Besse, S; Flahaut, J; Quantin-Nataf, C; Lozac'h, L; van Westrenen, W

2018-02-01

Moon Mineralogy Mapper (M 3 ) spectroscopic data and high-resolution imagery data sets were used to study the mineralogy and geology of the 207 km diameter Humboldt crater. Analyses of M 3 data, using a custom-made method for M 3 spectra continuum removal and spectral parameters calculation, reveal multiple pure crystalline plagioclase detections within the Humboldt crater central peak complex, hinting at its crustal origin. However, olivine, spinel, and glass are observed in the crater walls and rims, suggesting these minerals derive from shallower levels than the plagioclase of the central peak complex. High-calcium pyroxenes are detected in association with volcanic deposits emplaced on the crater's floor. Geologic mapping was performed, and the age of Humboldt crater's units was estimated from crater counts. Results suggest that volcanic activity within this floor-fractured crater spanned over a billion years. The felsic mineralogy of the central peak complex region, which presumably excavated deeper material, and the shallow mafic minerals (olivine and spinel) detected in Humboldt crater walls and rim are not in accordance with the general view of the structure of the lunar crust. Our observations can be explained by the presence of a mafic pluton emplaced in the anorthositic crust prior to the Humboldt-forming impact event. Alternatively, the excavation of Australe basin ejecta could explain the observed mineralogical detections. This highlights the importance of detailed combined mineralogical and geological remote sensing studies to assess the heterogeneity of the lunar crust.

Solidification/stabilization of dredged marine sediments for road construction.

Science.gov (United States)

Wang, Dong Xing; Abriak, Nor Edine; Zentar, Rachid; Xu, WeiYa

2012-01-01

Cement/lime-based solidification is an environmentally sound solution for the management of dredged marine sediments, instead of traditional solutions such as immersion. Based on the mineralogical composition and physical characteristics of Dunkirk sediments, the effects of cement and lime are assessed through Atterberg limits, modified Proctor compaction, unconfined compressive strength and indirect tensile strength tests. The variation of Atterberg limits and the improvement in strength are discussed at different binder contents. The potential of sediments solidified with cement or lime for road construction is evaluated through a proposed methodology from two aspects: I-CBR value and material classification. The test results show the feasibility of solidified dredged sediments for beneficial use as a material in road construction. Cement is superior to lime in terms of strength improvement, and adding 6% cement is an economic and reasonable method to stabilize fine sediments.

Interaction between water, sediments and radionuclides

International Nuclear Information System (INIS)

Snodgrass, W.J.; McKee, P.; Garnett, J.; Stieff, L.

1988-08-01

A model-based measurements program was carried out to evaluate the primary mechanisms controlling transport of uranium 238 and thorium 232 decay chain radionuclides in Quirke Lake, a water body draining much of the uranium mining and milling district near Elliot Lake, Ontario. This program included studies of radionuclide accumulation in sediments, particle settling and lake mass-balance studies. Also, sediment studies were undertaken to evaluate chemical fractionation, mineralogical associations, and sediment-water adsorption and release. A limnocorral experiment was conducted in an isolated portion of a lake to measure radium 226 removal from the water column and diffusion from the sediments back to the water. Modelling studies were made to assess the data. Substantial agreement was obtained using the model originally developed for the AECB between model predictions and observations for Quirke Lake and for the limnocorrals. Further work is required to complete the studies undertaken in this project to assess the significance of the efflux of radionuclides from the sediments. These studies include a laboratory program to measure kinetics of adsorption, sediment-water modelling studies of the results and a field measurement program to develop a mass-balance analysis for thorium. (numerous refs)

Confidence Hills Mineralogy and Chemin Results from Base of Mt. Sharp, Pahrump Hills, Gale Crater, Mars

Science.gov (United States)

Cavanagh, P. D.; Bish, D. L.; Blake, D. F.; Vaniman, D. T.; Morris, R. V.; Ming, D. W.; Rampe, E. B.; Achilles, C. N.; Chipera, S. J.; Treiman, A. H.;

Arsenic fractionation and mineralogical characterization of sediments in the Cold Lake area of Alberta, Canada

Energy Technology Data Exchange (ETDEWEB)

Javed, Muhammad Babar, E-mail: mjaved@ualberta.ca; Kachanoski, Gary, E-mail: gary.kachanoski@mun.ca; Siddique, Tariq, E-mail: tariq.siddique@ualberta.ca

2014-12-01

Elevated arsenic (As > 0.01 mg L{sup −1}) in some domestic well water in the Cold Lake area of Alberta, Canada is of great concern for public health. To determine possible sources of groundwater As, sediments (n = 135) collected from five different locations (up to ∼ 300 m depth) in the area were characterized. Total As concentrations in the sediments varied from ∼ 1 to 35 mg kg{sup −1}. Sediments derived from shale contained high As (∼ 13 mg kg{sup −1}; n = 14), particularly the shale of Lea Park formation where maximum average As was ∼ 32 mg kg{sup −1} (n = 2). Unoxidized sediments of Grand Centre (24.9 ± 4.2 mg kg{sup −1} As) and Bonnyville (19.9 ± 1.8 mg kg{sup −1} As) formations also contained high As. Sequential extraction procedure (SEP) revealed the dominance of exchangeable and specifically adsorbed As (6 to 46% of total As) in the sediments of varying As concentrations (0.8 to 35.4 mg kg{sup −1} As). The high As sediments (> 7 mg kg{sup −1} As) also contained significant amount of sulfide bound As (11 to 34% of total As), while low As (< 7 mg kg{sup −1} As) sediments had crystalline oxide minerals bound As (25 to 75% of total As) as major phases. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed the presence of pyrite, and μ-XRD analysis signaled the presence of arsenopyrite in sediments containing ∼ 20 mg kg{sup −1} As. X-ray absorption near edge structure (XANES) spectroscopy analysis suggested dominance of arsenite (AsIII; ∼ 60 to 90% of total As) in all the sediments. These findings may help to devise strategies to investigate mechanisms of As release into the groundwater. - Highlights: • High arsenic was found in sediments derived from shale. • Arsenic was mainly found in exchangeable and sulfide bound phases. • Pyrite and arsenopyrite minerals were found in high arsenic sediments. • Sulfide minerals in the sediments could be the potential source of groundwater As.

An example of Lower Proterozoic sediments: the Francevillian in Gabon

International Nuclear Information System (INIS)

Bonhomme, M.G.; Gauthier-Lafaye, F.; Weber, F.

1982-01-01

New mineralogical and isotopic data have been obtained on diagenetic fine fractions of the Francevillian sediments. Together with the Rb-Sr age of a syenitic intrusive and already published isotopic ages determined by means of uranium ore and uranium fission products, they allow us to present a more complete geological history of the Francevillian. The main steps are: deposition of the FA Formation before 2140 Ma deposition of the FB-FE Formations between 2140 and 2050 Ma, siliceous diagenesis followed by nuclear reactions between 2050 and 1930 Ma, carbonate diagenesis at nearly 1870 Ma, end of cooling at 1700 Ma and dolerite intrusion at ca. 970 Ma. The Francevillian sediments are, to date, the oldest true sediments known; they are diagenetic, Lower Proterozoic sediments. (Auth.)

Clay mineralogy of innershelf sediments off Cochin, west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Reddy, N.P.C.; Rao, N.V.N.D.; Dora, Y.L.

Kaolinite, montmorillonite and illite are the clay minerals occurring in decreasing order of abundance in the Holocene sediments of inner shelf and adjacent coastal environments of Cochin Region. Southern part of Vembanad Lake, estuarine part...

Sorption behaviour of cobalt-60 on Suez Canal bottom sediments

International Nuclear Information System (INIS)

Abdel Gawad, S.A.; El-Shinawy, R.M.K.; Abdel Malik, W.E.Y.

1981-01-01

Mineralogical, elemental analysis and sorption behaviour of the Suez Canal bottom sediments in the Port Said area were investigated. It was found that the bottom sediment consist mainly of quartz, feldspars and traces of calcite mineral. The cation-exchange capacity was found to increase as the particle size of the sediment decreased. Sorption of 60 Co by the bottom sediment increased with contact time up to 6 h. Variation of the solution pH from 4 to 9 showed limited increase in the sorption of 60 Co. As carrier concentrations increase from 10 -7 N to 10 -3 N, sorption of Co was found to increase linearly following Freundlich isotherm. The presence of Mg 2+ and Fe 3+ in solution depressed the sorption of 60 Co by the sediments. The desorption of 60 Co from bottom sediment with distilled and Suez Canal water was found to increase with contact time. (author)

Automated mineralogical logging of coal and coal measure core

Energy Technology Data Exchange (ETDEWEB)

Stephen Fraser; Joan Esterle; Colin Ward; Ruth Henwood; Peter Mason; Jon Huntington; Phil Connor; Reneta Sliwa; Dave Coward; Lew Whitbourn [CSIRO Exploration & Mining (Australia)

2006-06-15

A mineralogical core logging system based on spectral reflectance (HyLogger{trademark}) has been used to detect and quantify mineralogies in coal and coal measure sediments. The HyLogger{trademark} system, as tested, operates in the visible-to-shortwave infrared spectral region, where iron oxides, sulphates, hydroxyl-bearing and carbonate minerals have characteristic spectral responses. Specialized software assists with mineral identification and data display. Three Phases of activity were undertaken. In Phase I, carbonates (siderite, ankerite, calcite) and clays (halloysite, dickite) were successfully detected and mapped in coal. Repeat measurements taken from one of the cores after three months demonstrated the reproducibility of the spectral approach, with some spectral differences being attributed to variations in moisture content and oxidation. Also, investigated was HyLogger{trademark} ability to create a 'brightness-profile' on coal materials, and these results were encouraging. In Phase II, geotechnically significant smectitic clays (montmorillonite) were detected and mapped in cores of clastic roof and floor materials. Such knowledge would be useful for mine planning and design purposes. In Phase III, our attempts at determining whether phosphorus-bearing minerals such as apatite could be spectrally detected were less than conclusive. A spectral index could only be created for apatite, and the relationships between the spectrally-derived apatite-index, the XRD results and the analytically-derived phosphorus measurements were ambiguous.

Combining trace elements micro-analysis in deposited dredged sediments: EPMA and μ-XRF analysis

International Nuclear Information System (INIS)

Poitevin, A; Lerouge, C; Wille, G; Bataillard, P; Quinn, P; Hennet, L

2012-01-01

Since deposited dredged sediments are rich in metallic contaminants, they present a risk for environment. This work aims to study dredged sediments chemical composition, identify metal-carrier minerals and understand their mobility. Combining chemical and spectroscopic techniques at multi-scale for an integrative approach of trace elements (zinc, lead, iron) behaviour is therefore necessary. The global mineralogy and the chemistry of the sediment were determined by X-ray diffraction and fluorescence (XRF), respectively. Zn and Pb enriched fractions were separated using a sequential chemical extraction procedure and measured by inductively coupled plasma atomic emission and mass spectroscopy. Microanalyses using scanning electron microscopy (SEM), electron microprobe microanalysis (EPMA), combined with synchrotron radiation X-ray fluorescence (μ-XRF) were carried out to characterize mineralogical phases and identify Zn and Pb carrier minerals. Iron oxyhydroxides and iron sulphides were consistently identify as Zn and Pb carriers. The assumption that carbonate fraction was the major Zn carried phase, as demonstrated by chemical extraction results, was not verified by EPMA or μ-XRF.

Sediments in Arctic sea ice: Implications for entrainment, transport and release

Science.gov (United States)

Nurnberg, D.; Wollenburg, I.; Dethleff, D.; Eicken, H.; Kassens, H.; Letzig, T.; Reimnitz, E.; Thiede, Jorn

1994-01-01

Despite the Arctic sea ice cover's recognized sensitivity to environmental change, the role of sediment inclusions in lowering ice albedo and affecting ice ablation is poorly understood. Sea ice sediment inclusions were studied in the central Arctic Ocean during the Arctic 91 expedition and in the Laptev Sea (East Siberian Arctic Region Expedition 1992). Results from these investigations are here combined with previous studies performed in major areas of ice ablation and the southern central Arctic Ocean. This study documents the regional distribution and composition of particle-laden ice, investigates and evaluates processes by which sediment is incorporated into the ice cover, and identifies transport paths and probable depositional centers for the released sediment. In April 1992, sea ice in the Laptev Sea was relatively clean. The sediment occasionally observed was distributed diffusely over the entire ice column, forming turbid ice. Observations indicate that frazil and anchor ice formation occurring in a large coastal polynya provide a main mechanism for sediment entrainment. In the central Arctic Ocean sediments are concentrated in layers within or at the surface of ice floes due to melting and refreezing processes. The surface sediment accumulation in central Arctic multi-year sea ice exceeds by far the amounts observed in first-year ice from the Laptev Sea in April 1992. Sea ice sediments are generally fine grained, although coarse sediments and stones up to 5 cm in diameter are observed. Component analysis indicates that quartz and clay minerals are the main terrigenous sediment particles. The biogenous components, namely shells of pelecypods and benthic foraminiferal tests, point to a shallow, benthic, marine source area. Apparently, sediment inclusions were resuspended from shelf areas before and incorporated into the sea ice by suspension freezing. Clay mineralogy of ice-rafted sediments provides information on potential source areas. A smectite

Reconstructing the Mineralogy and Bioavailability of Dust-Borne Iron Deposited to the Southern Ocean through the Last Glacial Cycle

Science.gov (United States)

Shoenfelt, E. M.; Winckler, G.; Lamy, F.; Bostick, B. C.

2017-12-01

The iron (Fe) in dust deposited to the Fe-limited Southern Ocean plays an important role in ocean biogeochemistry and global climate. For instance, increases in dust-borne Fe deposition in the subantarctic Southern Ocean have been linked to increases in productivity and part of the CO2 drawdown of the last glacial cycle [1]. Notably, bioavailable Fe impacts productivity rather than total Fe. While it has long been understood that Fe mineralogy impacts Fe bioavailability in general, our understanding of the mineralogy of Fe in dust in specific is limited to that in modern dust sources. Reduced mineral Fe in dust has been shown to be more bioavailable than oxidized mineral iron, as it is more readily dissolved [2], and it is more easily utilized directly by a model diatom [3]. Our previous work focusing on South American dust sources shows that glacial activity is associated with higher Fe(II) fractions in dust-borne minerals, due to the physical weathering of Fe(II)-rich silicates in bedrock [3]. Thus, we hypothesize that there were higher Fe(II) fractions in dust deposited during cold glacial periods where ice sheets were more widespread. Using synchrotron-based X-ray absorption spectroscopy, we have reconstructed the mineralogy of Fe deposited to Southern Ocean sediment cores from the subantarctic South Atlantic (TN057-6/ODP Site 1090) and South Pacific (PS7/56-1) through the last glacial cycle, creating the first paleorecord of Fe mineralogy and its associated bioavailability. During cold glacial periods there is a higher fraction of reduced Fe - in the form of Fe(II) silicates - deposited to the sediments compared to warm interglacial periods. Thus, Fe(II) content is directly correlated with dust input. The presence of Fe(II) silicates rather than products of diagenesis such as pyrite suggests that these Fe(II) minerals are physically weathered from bedrock and preserved rather than produced in the sediment. This result suggests that not only was there more dust

Palygorskite from cave sediments: case study from Wadi Haqil, United Arab Emirates

Czech Academy of Sciences Publication Activity Database

Zupan Hajna, N.; Skála, Roman; Al-Farraj, A.; Šťastný, Martin; Bosák, Pavel

2016-01-01

Roč. 9, č. 17 (2016), č. článku 689. ISSN 1866-7511 Institutional support: RVO:67985831 Keywords : palygorskite * gypsum * cave sediments * X-ray powder diffraction * scanning electron microscopy * Ras Al-Khaimah Emirate Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.955, year: 2016

Recent metalliferous sediment in the North Pacific manganese nodule area

Science.gov (United States)

Bischoff, J.L.; Rosenbauer, R.J.

1977-01-01

Quaternary sediments cored in the northeast Pacific nodule area (DOMES site C, 14??N, 126??W) contain a significant amount of hydrothermal metalliferous mud. Water content, color, mineralogy, and chemical composition are analogous to metalliferous sediments of the subequatorial East Pacific Rise. Correction for contribution of pelagic clay indicates the metalliferous fraction to be about 40% of the sediment. SiO2 and Mg are major components in the corrected composition, as they are for other metalliferous sediments similarly corrected from a variety of East Pacific Rise and DSDP metalliferous sediments. A correlation between Mg and SiO2 for these corrected sediments could indicate a hydrothermal origin for a significant portion of the SiO2. Results from DSDP in the nodule area suggest that metalliferous globules are a ubiquitous minor component of the Clipperton Oceanic Formation, which underlies much of the Pacific ferromanganese nodule belt. This indicates that deposition of hydrothermal precipitates is not confined to spreading centers. ?? 1977.

Atributos de solos hidromórficos no Pantanal Norte Matogrossense Attributes of the hydromorphic soils in the Pantanal of North Matogrosso

Directory of Open Access Journals (Sweden)

Elaine de Arruda Oliveira Coringa

2012-03-01

Full Text Available Os solos hidromórficos, comuns na Amazônia e no Pantanal, estão sujeitos à alternância natural de períodos de alagamento e secamento, que conduzem a uma formação e características diferenciadas. Estes solos guardam estreita relação com a natureza do material de origem e com os processos de deposição e sedimentação. O objetivo neste trabalho foi avaliar as características químicas, morfológicas e mineralógicas de três perfis de solos do Pantanal Norte Matogrossense (Planossolo, Plintossolo e Gleissolo, a fim de interpretar as relações entre suas propriedades e o ambiente em que foram formados. Os Planossolos e Gleissolos possuem maior fertilidade natural, evidenciada pelos valores expressivos de CTC (capacidade de troca de cátions e saturação por bases. Os menores teores de Fe2O3 do Planossolo estão relacionados com a redução e remoção do Fe durante sua gênese A mineralogia da fração areia dos solos é constituída principalmente de quartzo, nódulos e concreções de Fe e de Mn, e em menor grau, biotita, muscovita e traços de turmalina, magnetita, ilmenita, epídoto, zircão e rutilo. Os solos apresentaram perfil mineralógico semelhante na fração argila, constituído por caulinita, esmectita, ilita e interestratificados do tipo ilita-esmectita. A mineralogia da fração argila dos solos foi compatível com as diferenças químicas constatadas entre eles, pois o Planossolo apresentou argila de maior atividade relativa às esmectitas e interestratificados ilita/esmectita, com maior soma de bases trocáveis e CTC, enquanto o Plintossolo e o Gleissolo, cujo mineral predominante foi a caulinita, apresentaram baixo teor de bases trocáveis e menor CTC.The hydromorphic soils, common in the Amazon and the Pantanal, are subject to alternating periods of natural flooding and drying, leading to formation and differentiated characteristics. These soils are closely related to the nature of the sediments, a consequence of

Mineralogia e cristalografia da fração argila de horizontes coesos de solos nos tabuleiros costeiros Crystallography and mineralogy of the clay fraction of hardsetting horizons in soils of coastal tablelands in Brazil

Directory of Open Access Journals (Sweden)

Neyde Fabíola Balarezo Giarola

2009-02-01

-related physical and chemical factors, but an influence of mineralogical and crystallographic properties of clay minerals was also suggested by some researchers. In this study we tested the possibility that clay fraction of hardsetting horizons of soils from the Barreiras sediments of Coastal Tablelands are predominantly kaolinitic and highly crystalline and organized, which can favor a face-to-face arrangement of the crystals. The purpose of this study was to evaluate the crystallographic and mineralogical characteristics of clay minerals in hardsetting soil horizons from the sediment group Barreiras and their contribution to the hardsetting character. One non-hardsetting and five hardsetting horizons were studied along the coastal tableland. A kaolinite sample with high crystallinity degree was also included as reference. All profiles were analyzed for taxonomic classification and location of the horizons of interest. Organic matter and oxides were removed from the samples of the selected horizons. After soil dispersion, the clay fraction was individualized, treated and examined by X-ray diffraction (XRD to determine the minerals and structure degree of order/disorder, according to the method described by Plançon & Zacarie (1990. The degree of structural organization of the kaolinites of the hardsetting and non-hardsetting horizons was similar to and lower than the kaolinite used as reference. Results indicated that the hardsetting behavior of the studied soils could not be explained by clay packaging.

On the surficial sediments of the fresh water Naini Lake, Kumaun Himalaya, India

Digital Repository Service at National Institute of Oceanography (India)

Jauhari, P.; Hashimi, N.H.

mineralogy show that the surface sediments of these two sub-basins differ slightly. The general distribution of most of the analysed elements is higher in the Mallital (NW) sub-basin as compared to the Tallital (SE) sub-basin, the exception being total C, Ca...

Mineralogical and petrographic investigations at Strasbourg on the Oklo natural reactors

International Nuclear Information System (INIS)

Gauthier-Lafaye, F.; Weber, F.

1978-01-01

Petrographic and mineralogical investigations have revealed the presence around the reaction zones of aureoles characterized by the nature of the phyllitic minerals which they enclose. Running from the outside towards the core, these are: illite 1Md and ferriferous chlorite (normal sediment), illite 2M 1 , magnesium chlorite and kaolinite, illite 1M and vermiculite chlorite. Detritic quartz dissolution figures are observed which disappear in the illite 2M aureole or in the magnesium chlorite aureole, depending on the degree of sandiness of the country rock. This zonal stucture could be attributable to the combined effect of neutron bombardment and hydrothermal alteration due to the action of a thermal syphon triggered off by the nuclear reactions. (author)

Mineralogia y sedimentologia del yacimiento de saponita de Yuncos (Toledo

Directory of Open Access Journals (Sweden)

Casas Sainz de Aja, J.

1992-04-01

Full Text Available Mineralogy and textures of saponite-bearing bentonites and related facies have been studied in quarries located southwest of Yuncos village (Toledo in the Madrid Neogene Basin. Results allow us to establish three stages related with the evolution of sedimentary environments, where bentonite deposits (middle stage are at the boundary between lacustrine (lower stage and distal alluvial facies (upper stage. Lower stage: Regressive mud flat deposits with paleopedogenic features, made up of green clays facies with variable detrital content and hydromorphic mottling at topo Clay mineralogy association: Smectite (tri-dioctahedral-illite-(kaolinite. Middle stage: Transitional stage of shallow flooding with variable development of paleopedogenic features. The facies association is made up of saponitic brown clays with several textures (massive, fissile-Iaminated, brecciated and occasional carbonates as calcite ooids or dolomite nodules. Clay mineralogy association: Smectite (trioctahedral-illite-sepiolite-( kaolinite . Upper stage: Progradation of distal alluvial fan deposits. The facies association is made up by reddish to brownish mudstones often with bioturbation features and hydromorphic mottling, with sporadic sandy inserts. Clay mineralogy association: Smectite (tri-dioctahedral- illite-sepiolite-(kaolinite-chlorite. Illite, dioctahedral smectite, kaolinite and chlorite are interpreted as inherited clay minerals, whilst saponite and sepiolite are of authigenic origino Saponite origin is early diagenetic both by dioctahedral smectite transformation and neoformation, being an inhomogeneous genetic process so that the purest bentonite is located far away from distal alluvial progradation where the flooding is longer in time. From a genetic point of view, sepiolite is later than trioctahedral smectite sometimes being in short fibers on saponite sheets, at others in longer fibers as a cement, both cases related to salinity-alkalinity changes in the

Skeletal carbonate mineralogy of Scottish bryozoans

Science.gov (United States)

Spencer Jones, Mary; Najorka, Jens; Smith, Abigail M.

2018-01-01

This paper describes the skeletal carbonate mineralogy of 156 bryozoan species collected from Scotland (sourced both from museum collections and from waters around Scotland) and collated from literature. This collection represents 79% of the species which inhabit Scottish waters and is a greater number and proportion of extant species than any previous regional study. The study is also of significance globally where the data augment the growing database of mineralogical analyses and offers first analyses for 26 genera and four families. Specimens were collated through a combination of field sampling and existing collections and were analysed by X-ray diffraction (XRD) and micro-XRD to determine wt% MgCO3 in calcite and wt% aragonite. Species distribution data and phylogenetic organisation were applied to understand distributional, taxonomic and phylo-mineralogical patterns. Analysis of the skeletal composition of Scottish bryozoans shows that the group is statistically different from neighbouring Arctic fauna but features a range of mineralogy comparable to other temperate regions. As has been previously reported, cyclostomes feature low Mg in calcite and very little aragonite, whereas cheilostomes show much more variability, including bimineralic species. Scotland is a highly variable region, open to biological and environmental influx from all directions, and bryozoans exhibit this in the wide range of within-species mineralogical variability they present. This plasticity in skeletal composition may be driven by a combination of environmentally-induced phenotypic variation, or physiological factors. A flexible response to environment, as manifested in a wide range of skeletal mineralogy within a species, may be one characteristic of successful invasive bryozoans. PMID:29897916

Holocene sediment accumulation in the Aespoe area. A study of a sediment core

International Nuclear Information System (INIS)

Risberg, Jan

2002-12-01

A sediment core was collected in 1993 in the archipelago above the tunnel between the Aespoe Island and Simpevarp nuclear power plant. The sediment sequence consists of four types of accumulations: brownish clay, bluish clay, sand mixed with gravel and gyttja. The sequence was studied according to its content of siliceous microfossils (mainly diatoms), mineral magnetic characteristics, clay mineralogy and it was dated by the AMS technique on bulk sediment samples. According to the diatom content, both types of clay were probably deposited during the brackish water Yoldia Sea stage. The clay is relatively uniform, except an abrupt increase in the mineral magnetic parameters HIRM and S-ratio at around 810 cm depth, which probably is the result from a change in the material source. The clay mineralogy, with enhanced chlorite values, indicates a relatively uniform material. A major change occurs at the transition from the bluish to brownish clay, where all magnetic concentrations drop dramatically as the result from a major shift in material source and/or sedimentation environment. The thin layer of sand and gravel is indicative of a major hiatus in the stratigraphy. Mineral magnetic concentrations increase slightly as the result from mixing with single domain ground surface generated particles. Based on a Yoldia Sea age for the underlying clay and deposition in the Litorina Sea 3000 years BP for the superimposed gyttja, it is suggested that the length of the hiatus is about 7000 years. It is not until the studied site became protected enough by rising land areas, that organic rich gyttja started to accumulate.It is likely that this scenario was established when sea level was situated at around 10 m above present day. Since then it seems, as determined from the mineral magnetic graphs, that the sedimentary conditions have been relatively uniform. More pronounced fluctuations in mineral magnetic concentrations (especially ARM/SIRM ratios)in the upper 2 m of the core

Holocene sediment accumulation in the Aespoe area. A study of a sediment core

Energy Technology Data Exchange (ETDEWEB)

Risberg, Jan [Stockholm Univ. (Sweden). Dept. of Quaternary Research

2002-12-01

A sediment core was collected in 1993 in the archipelago above the tunnel between the Aespoe Island and Simpevarp nuclear power plant. The sediment sequence consists of four types of accumulations: brownish clay, bluish clay, sand mixed with gravel and gyttja. The sequence was studied according to its content of siliceous microfossils (mainly diatoms), mineral magnetic characteristics, clay mineralogy and it was dated by the AMS technique on bulk sediment samples. According to the diatom content, both types of clay were probably deposited during the brackish water Yoldia Sea stage. The clay is relatively uniform, except an abrupt increase in the mineral magnetic parameters HIRM and S-ratio at around 810 cm depth, which probably is the result from a change in the material source. The clay mineralogy, with enhanced chlorite values, indicates a relatively uniform material. A major change occurs at the transition from the bluish to brownish clay, where all magnetic concentrations drop dramatically as the result from a major shift in material source and/or sedimentation environment. The thin layer of sand and gravel is indicative of a major hiatus in the stratigraphy. Mineral magnetic concentrations increase slightly as the result from mixing with single domain ground surface generated particles. Based on a Yoldia Sea age for the underlying clay and deposition in the Litorina Sea 3000 years BP for the superimposed gyttja, it is suggested that the length of the hiatus is about 7000 years. It is not until the studied site became protected enough by rising land areas, that organic rich gyttja started to accumulate.It is likely that this scenario was established when sea level was situated at around 10 m above present day. Since then it seems, as determined from the mineral magnetic graphs, that the sedimentary conditions have been relatively uniform. More pronounced fluctuations in mineral magnetic concentrations (especially ARM/SIRM ratios)in the upper 2 m of the core

A regional mineralogical study of the manganese-bearing Voelwater subgroup in the northern Cape Province

International Nuclear Information System (INIS)

Kleyenstueber, A.S.E.

1985-11-01

The Voelwater Subgroup, of the Proterozoic Transvaal Sequence, in the Hotazel area, is preserved in five structurally controlled basins, on the eastern side of the Dimoten syncline. The Subgroup represents a relatively undisturbed unit of mixed volcanogenic - chemical sedimentary rocks. The Hotazel Formation within the Voelwater Subgroup, consists of a finely banded carbonate - silicate - hematite - manganese lutite sequence of banded iron-formation and must be unique in that it contains the world's largest land-based repository of manganese. Twenty-one drill cores, sampled lithologically at intervals of approximately one metre through the total sedimentary sequence, were studied by microscopic, X-ray diffraction and electron microprobe methods. The mineralogy of the Voelwater Subgroup was studied on a regional scale, with the emphasis on the minerals within the manganese beds of the Hotazel Formation. The objective of the study was: a. To study the variation and distrubution of minerals in the various manganese ores on a regional scale. b. To compare the mineralogical differences of the different ores mined, in order to gain a better understanding of their metallurgical behaviour. c. To try to locate high-grade manganese ore target areas for future exploration, with the aid of mineralogical information. d. To try to establish the origin of the manganese in the Voelwater Formation. e. To study the relationship of the manganese units with the adjacent chemical sediments of the Hotazel Formation

Stáří fluviálních sedimentů v jeskyni Výpustek (Moravský kras)

Czech Academy of Sciences Publication Activity Database

Kadlec, Jaroslav; Šlechta, Stanislav

2007-01-01

Roč. 47, - (2007), s. 13-16 ISSN 1213-4724 Institutional research plan: CEZ:AV0Z30130516 Keywords : magnetic properties - - * fluvial sediment dating * cave (Moravian Carst) Subject RIV: DB - Geology ; Mineralogy

Sources of heavy metals in sediments of the Hudson River Estuary

International Nuclear Information System (INIS)

Williams, S.C.; Simpson, H.J.; Olsen, C.R.; Bopp, R.F.

1978-01-01

Sediments in the Hudson Estuary contain zinc, copper and lead from metal pollutants discharged to the harbor in the New York City area, from dispersed sources of contamination introduced upstream, and from natural weathering processes. The magnitude of the contribution from each of these three sources to particular sites can be estimated on the basis of total metal abundances, relative proportions of several metals, and other sediment properties. The pattern of recent heavy-metal contamination in Hudson sediments closely follows the distribution in sediments of 137 Cs which was derived over the past two decades from global fallout and local releases from a commercial nuclear reactor. Several simple empirical corrections related to grain size and mineralogy variations are suggested for comparing heavy-metal contamination levels of sandy continental shelf sediments with fine-grained estuarine and coastal sediments. Iron has little variation in Hudson sediments while manganese is greater in surface sediment of some low-salinity and fresh-water areas than deeper in the sediments, and generally less in the high-salinity area of rapid sediment deposition in New York harbor. Much of the pollutant Cu added to the harbor appears to be rapidly deposited in the sediments. (Auth.)

Reflectance spectroscopy and asteroid surface mineralogy

International Nuclear Information System (INIS)

Gaffey, M.J.; Bell, J.F.; Cruikshank, D.P.

1989-01-01

Information available from reflectance spectroscopy on the surface mineralogy of asteroids is discussed. Current spectral interpretive procedures used in the investigations of asteroid mineralogy are described. Present understanding of the nature and history of asteroids is discussed together with some still unresolved issues such as the source of ordinary chondrites. 100 refs

Mineralogical, geochemical and hydrocarbon potential of subsurface Cretaceous shales, Northern Western Desert, Egypt

Directory of Open Access Journals (Sweden)

D.A. Mousa

2014-03-01

Full Text Available Twenty four Cretaceous shale core samples of Gibb Afia-1, Betty-1, Salam-1X and Mersa Matruh-1 wells were mineralogically and geochemically studied using XRD, XRF and Rock Eval Pyrolysis. Kaolinite, smectite and illite are the main clay minerals in addition to rare chlorite, while the non-clay minerals include quartz, calcite, dolomite and rare siderite. The shales were derived through intensive chemical weathering of mafic basement and older sedimentary rocks. These sediments were deposited in a near-shore shallow marine environment with some terrestrial material input. The shales have poor to fair organic content. It is marginally to rarely mature.

Composite fingerprinting of suspended-sediments in Sorsogon , Philippines

International Nuclear Information System (INIS)

Ramirez, J.D.; Sta Maria, E.J.; Madrid, J.F.; Asa, A.D.D.; Aniago, R.J.; Bulos, A.D.; Zombrito, E.Z.

2015-01-01

Sediment-related environmental problems pose a threat not only in land management sustainability but also in management of aquatic ecosystem. Sediments often serve as sinks of nutrients and contaminants that regularly recharge overlying waters and could trigger harmful algal blooms (HAB) together with unfavorable environment conditions. One HAB affected area in the southernmost tip of Luzon, Philippines is Sorsogon Bay. In Sorsogon Bay, the harvest and consumption ban was declared for several years due to the level of toxins in shellfish which exceeded the regulatory limit. Identification of sediment sources is useful tool in planning effective sediment management strategies. A method to determine possible sources of sediment-associated nutrients is sediment fingerprinting. It characterizes land-based sediment sources to derive estimates of the portions of suspended sediment originating from discrete upstream source areas. There are wide ranges of diagnostic properties which can be possible fingerprints such as mineralogic, mineral-magnetic, geochemical, organic, isotopic, physical and radiometric parameters. This study investigates on potential source of sediments from Sampaloc River using different chemical, radiometric and isotopic parameters, Range test and Kruskal-Wallis H-test were employed and indicated that the calcium, titanium, δ”1”3C signal, and to tal carbon content are possible fingerprint parameters that will identify the sources of sediments. Results of a mathematical mixing model showed that channel banks (81.0%) are the largest sediment load contributors in Sampaloc River, followed by cultivated areas (15.5%) and woodlands (3.5%). (author)

Mineralogie jílovitých sedimentů z výplní štramberského vápence (slezská jednotka, vnější Západní Karpaty)

Czech Academy of Sciences Publication Activity Database

Melka, Karel; Svobodová, Marcela

-, - (2004), s. 115-117 ISSN 0514-8057 R&D Projects: GA ČR(CZ) GA205/01/1582 Keywords : mineralogy * pelitic sediments * X-ray diffraction Subject RIV: DB - Geology ; Mineralogy http://www.geology.cz/zpravy/obsah/2003/zpravy-o-vyzkumech-2003-str-115-117.pdf

Provenance discrimination of sediments in the Zhejiang-Fujian mud belt, East China Sea: Implications for the development of the mud depocenter

Science.gov (United States)

Liu, Xiting; Li, Anchun; Dong, Jiang; Lu, Jian; Huang, Jie; Wan, Shiming

2018-01-01

In the past decade, the 800 km elongated mud belt off Zhejiang-Fujian coast, East China Sea (ECS), has been extensively studied for understanding the source to sink processes on the East Asian continental margin in the context of the Asian monsoon. However, to better understand the sediment source and dispersal pattern, the existing mineralogical and geochemical data of adjacent river systems, including the Changjiang River (CJR) and local rivers in Zhejiang, Fujian and Taiwan, need to be systematically reviewed. Therefore, various indicators from published literatures for the provenance discrimination in the mud belt have been summarised in this article. The results show that high diversity of clay mineral assemblages in fluvial sediments being supplied into the mud belt, e.g., dominant illite and chlorite in the CJR, absence of smectite in Taiwan rivers, similar amounts of the four clay mineral species in Zhejiang rivers, and dominant kaolinite in Fujian rivers. On heavy mineralogy, the CJR is dominated by dolomite, hornblende, and flaky minerals; and among of them, dolomite is distinctive for the CJR. For geochemical approaches, elemental compositions, combined with strontium and neodymium isotopes, reflect strong provenance control. However, geochemical and mineralogical compositions are found to vary with grain size, and thus extra caution should be taken when using these parameters as provenance indicator to discriminate the marine sediments with variety of grain-size fractions. In addition, pyrrhotite, occurred in fluvial sediments from western Taiwan, has not been found in sediments derived from mainland China, indicating that magnetic parameters could be used to discriminate sediment provenance. The mud belt formed during sea-level highstand, when modern current system in the ECS has been established, resulting in sediments derived from the CJR have been transported southward since 8 ka. In addition, sediment provenances have not been constant since

Dolní Věstonice - Biostratigraphie der Sedimente einer Hangrinne (ein Beitrag zur Polygenese der holozähnen Bodenbildungen)

Czech Academy of Sciences Publication Activity Database

Ložek, Vojen

2006-01-01

Roč. 26, - (2006), s. 51-60 ISSN 0036-5270 Institutional research plan: CEZ:AV0Z30130516 Keywords : Holocene furrow infilling * colluvial sediments * chernozem * luvisol * malacostratigraphy * paleoenvironments * forest steppe Subject RIV: DB - Geology ; Mineralogy

The accumulation of radiocesium in coarse marine sediment: Effects of mineralogy and organic matter

International Nuclear Information System (INIS)

Kim, Yeongkyoo; Kim, Kangjoo; Kang, Hee-Dong; Kim, Wan; Doh, Si-Hong; Kim, Do-Sung; Kim, Byoung-Ki

2007-01-01

The controlling factors affecting the accumulation of 137 Cs in marine sediment have not been investigated in detail, especially in coarse grained sediment. Eighty eight coarse marine sediment samples near Wuljin, Korea, were characterized by quantitative X-ray-diffraction (XRD), gamma-ray, and total organic carbon (TOC) analysis. Those factors were then compared. The grain size was in the range of -0.48 to 3.6 Mdφ corresponding to sand grains. TOC content was in the range of 0.06-1.75%, and the concentration of 137 Cs was 137 Cs activity, which was first reported here, probably due to the weathered frayed edge site of biotite produced by a release of K. The samples with low TOC contents showed even better correlation between biotite content and 137 Cs activity. For the entire samples, however, the TOC content showed better correlation with 137 Cs activity than other single factors, indicating that biotite and organic carbon are the most important factors controlling 137 Cs fixation. The combined effect of biotite and TOC for 137 Cs fixation was also confirmed by multiple regression analysis ( 137 Cs activity = 1.712 . TOC (wt%) + 0.202 . biotite (wt%) - 0.097; R 2 = 0.819). The regressed slopes indicated that the 137 Cs-adsorption capacity of TOC was about 8.5 times higher than that of biotite. However, the amount of 137 Cs adsorbed onto biotite was 30% more than that adsorbed onto TOC due to much greater biotite content in the sediment. The role of biotite in fixing 137 Cs becomes more important in sediment with coarser grains, containing little TOC

Mineralogy. 2. rev., enlarged ed.

International Nuclear Information System (INIS)

Matthes, S.

1987-01-01

The textbook is intended for students with a basic knowledge of descriptive mineralogy and crystallography who wish to enhance their knowledge in the fields of determinative mineralogy, petrology, and the geology and genesis of mineral deposits. The material presented concentrates on the essential aspects of the subject fields and is completed by up-to-date information concerning the technical and economic significance of the minerals, rocks and ores as raw materials. With 165 figs., 2 tabs [de

Mineralogical and geochemical characters of surface sediments from the central Indian Basin

Digital Repository Service at National Institute of Oceanography (India)

Banerjee, R.

are enriched in trace metal (e.g. Mn, Fe, Ni, Cu, Co) inhomogeneously. Ni, Cu and Co are well correlated with Mn in terrigenous, siliceous and pelagic clay sediments. However, metal enrichment processes differ. The enrichment process is diagenetic in siliceous...

Quartzites beneath pyroclastic flows – mineralogical aspects

Czech Academy of Sciences Publication Activity Database

Malý, Karel; Cajz, Vladimír

2005-01-01

Roč. 37, č. 3 (2005), s. 370-371 ISSN 0369-2086 R&D Projects: GA AV ČR(CZ) IAA3013302 Institutional research plan: CEZ:AV0Z30130516 Keywords : quartzite * ignimbrite * mineralogy Subject RIV: DB - Geology ; Mineralogy

Factors affecting sorption of radiocobalt by river sediments

International Nuclear Information System (INIS)

El-Din, M.R.E.; Ramadan, A.B.; Atta, E.R.

2001-01-01

Analysis of the principal factors affecting the interaction of radio cobalt with fresh water sediments and their importance for migration of radio cobalt in surface water streams. The uptake percent (U%) of radio cobalt by Ismailia Cannal bottom sediments (ICUBS) have been studied as a function of contact time, ph, competing ion, carrier concentration and natural ligands such as humic acid using batch technique. Mineralogical analyses of the sediment samples were carried out. The amount sorbed per gram sediment, (X/m), increased as the carrier concentration increased from 10 -8 mol. Following a Freundlich type isotherm. The uptake of radio cobalt was found to be affected by changing in the ph of the aqueous phase. Presence of Mg 24 ions as competing cation decreases the sorption of 60 Co. Presence of humic acid shows a slight effect on the sorption of 60 Co. Desorption of the investigated metal ion from the loaded sediment samples was also studied. A mathematical model for the migration of the investigated radioisotope in Ismailia canal water stream was developed to predict the concentrations of cobalt ion at different distances in X-direction

Actinide occurrences in sediments following ground disposal of acid wastes at 216-Z-9

International Nuclear Information System (INIS)

Ames, L.L.

1976-01-01

Liquid acid wastes from a Pu recovery facility at Hanford were released to the ground via structures collectively termed trenches from 1955 through 1962. Data are presented from a study of the microdistribution of Am and Pu in samples from the 216-Z-9 trench. Solution sediment relationships and associated actinide removal mechanisms under acid conditions were studied. Core wells were drilled into the sediments in which this covered trench is located and in the immediate vicinity to obtain samples for quantitative mineralogical analysis and comparison of sediments from various depths of contaminated and noncontaminated areas. Analytical techniques are described and results are reported

On the geotechnical characterisation of the polluted submarine sediments from Taranto.

Science.gov (United States)

Vitone, Claudia; Federico, Antonio; Puzrin, Alexander M; Ploetze, Michael; Carrassi, Elettra; Todaro, Francesco

2016-07-01

This paper reports the results of the first geomechanical laboratory experiments carried out on the polluted submarine clayey sediments of the Mar Piccolo in Taranto (South of Italy). The study had to face with extreme difficulties for the very soft consistency of the sediments and the contaminants. The mineralogy, composition and physical properties of the sediments were analysed, along with their compression and shearing behaviour. The investigation involved sediments up to about 20 m below the seafloor, along three vertical profiles in the most polluted area of the Mar Piccolo, facing the Italian Navy Arsenal. The experimental results were used to derive a preliminary geotechnical model of the site, necessary for the selection and design of the most sustainable in situ mitigation solutions. Moreover, the experimental data reveal that the clayey sediments of the most polluted top layer do not follow the classical geotechnical correlations for normally consolidated deposits. This seems to open interesting perspectives about the effects of pollutants on the geotechnical behaviour of the investigated sediments.

Non-halide sediments from the Loule diapir salt mine: characterization and environmental significance

Science.gov (United States)

Ribeiro, Carlos; Terrinha, Pedro; Andrade, Alexandre; Fonseca, Bruno; Caetano, Miguel; Neres, Marta; Font, Eric; Mirão, José; Dias, Cristina; Rosado, Lúcia; Maurer, Anne-France; Manhita, Ana

2017-04-01

The sedimentary record of the Mesozoic Algarve Basin (south Portugal) spans from the Triassic to the Lower Cretaceous. Following the initial phase of Pangaea breakup and the related continental sedimentation during the Triassic, the sedimentation evolved through transitional (Triassic-Jurassic transition) to marine (Jurassic) environments. During the Hettangian a thick sequence of evaporites deposited in the basin. Most of the occurrences of these deposits have undetermined volumes, due to the post depositional diapiric movements. At the central Algarve, under the town of Loulé, a salt wall of up to > 1 km across, > 3 km in length and > 2 km in height has been exploited for the chemical industry (Loulé Diapir - LD). Most of the sediments that constitute LD are halides (> 99% halite), the exception being a package of non-halide sediments, constituted by carbonates (dolomite and magnesite) and sulphates (anhydrite) in various proportions with a maximum thickness of 3 meters. This package has a distinctive mesoscopic aspect of three layers of approximately the same thickness, different colours and primary sedimentary structures: black-brow-grey, from bottom to top. The sediments of this package were studied with a multidisciplinary approach aiming their mineralogical and chemical characterization, the determination of the organic matter content and origin, as well as the characterization and understanding of the chemical processes that occurred during the emplacement and compression of the LD: (i) X-ray diffraction for the determination of the mineral phases present and semi-quantification using the RIR-Reference Intensity Ratio method; (ii) micro analysis of the mineralogical samples by Scanning Electron Microscopy coupled to Energy Dispersive Spectroscopy; (iii) REE content determination by ICP-MS; (iv) determination of the carbon content by CHN Elemental analysis; (v) determination of the organic matter content by elemental analysis and their composition by

Marine dredged sediments as new materials resource for road construction.

Science.gov (United States)

Siham, Kamali; Fabrice, Bernard; Edine, Abriak Nor; Patrick, Degrugilliers

2008-01-01

Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).

Hydrogeochemical and mineralogical effects of sustained CO₂ contamination in a shallow sandy aquifer: A field-scale controlled release experiment

DEFF Research Database (Denmark)

Cahill, Aaron Graham; Marker, Pernille Aabye; Jakobsen, Rasmus

2014-01-01

A shallow aquifer CO2 contamination experiment was performed to investigate evolution of water chemistry and sediment alteration following leakage from geological storage by physically simulating a leak from a hypothetical storage site. In a carbonate-free aquifer, in western Denmark, a total...... of 1600 kg of gas phase CO2 was injected at 5 and 10 m depth over 72 days through four inclined injection wells into aeolian and glacial sands. Water chemistry was monitored for pH, EC, and dissolved element evolution through an extensive network of multilevel sampling points over 305 days. Sediment cores...... were taken pre and postinjection and analyzed to search for effects on mineralogy and sediment properties. Results showed the simulated leak to evolve in two distinct phases; an advective elevated ion pulse followed by increasing persistent acidification. Spatial and temporal differences in evolution...

Mineralogy of Sediments on a Cold and Icy Early Mars

Science.gov (United States)

Rampe, E. B.; Horgan, B. H. N.; Smith, R.; Scudder, N.; Rutledge, A. M.; Bamber, E.; Morris, R. V.

2017-12-01

The water-related minerals discovered in ancient martian terrains suggest liquid water was abundant on the surface and/or near subsurface during Mars' early history. The debate remains, however, whether these minerals are indicative of a warm and wet or cold and icy climate. To characterize mineral assemblages of cold and icy mafic terrains, we analyzed pro- and supraglacial rocks and sediments from the Collier and Diller glacial valleys in Three Sisters, Oregon. We identified primary and secondary phases using X-ray diffraction (XRD), scanning and transmission electron microscopies with energy dispersive spectroscopy (SEM, TEM, EDS), and visible/short-wave-infrared (VSWIR) and thermal-infrared (TIR) spectroscopies. Samples from both glacial valleys are dominated by primary igneous minerals (i.e., plagioclase and pyroxene). Sediments in the Collier glacial valley contain minor to trace amounts of phyllosilicates and zeolites, but these phases are likely detrital and sourced from hydrothermally altered units on North Sister. We find that the authigenic phases in cold and icy mafic terrains are poorly crystalline and/or amorphous. TEM-EDS analyses of the materials, including iron oxides, devitrified volcanic glass, and Fe-Si-Al (e.g., proto-clay) phases. A variety of primary and secondary amorphous materials (e.g., volcanic glass, leached glass, allophane) have been suggested from orbital IR data from Mars, and the CheMin XRD on the Curiosity rover has identified X-ray amorphous materials in all rocks and soils measured to date. The compositions of the Gale Crater amorphous components cannot be explained by primary volcanic glass alone and likely include secondary silicates, iron oxides, and sulfates. We suggest that the prevalence of amorphous materials on the martian surface and the variety of amorphous components may be a signature of a cold and icy climate on Early Mars.

Characterization of sediments laid on Solimoes/Amazonas river flood plains, using energy dispersive X-ray fluorescence technique

International Nuclear Information System (INIS)

Carneiro, Ana E.V.; Nascimento Filho, Virgilio F. do

1997-01-01

This paper proposes sediment analysis with high light elements fraction using dispersive energy X-ray fluorescence technique with radioisotopic excitation, The proposed procedure is based on the Fundamental Parameters for analytical elements (Z ≥ 13) evaluation, and coherent and incoherent scattered radiation for quantification of the light fraction of the matrix (Z < 13). Laid sediments samples on Solimoes/Amazonas river flood plains were analyzed, determining simultaneously the Al, Si, K, Ca, Ti, Fe, Sc, V, Mn, Cu, Zn, Rb, Sr and Zr element concentrations, thus allowing chemical characterization and spatial variability, and some mineralogical and weathering sediments aspects. (author). 15 refs., 11 tabs

Mineralogical conversion of asbestos containing materials

International Nuclear Information System (INIS)

Pulsford, S.K.; Foltz, A.D.; Ek, R.B.

1996-01-01

The principal objective of the Technical Task Plan (TTP) is to demonstrate a thermal-chemical mineralogical asbestos conversion unit at the Hanford Site, which converts non-radiological asbestos containing materials (ACMs) into an asbestos-free material. The permanent thermal-chemical mineralogical conversion of ACMs to a non-toxic, non-hazardous, potentially marketable end product should not only significantly reduce the waste stream volumes but terminate the open-quotes cradle to graveclose quotes ownership liabilities

Trace elements in lake sediments measured by the PIXE technique

International Nuclear Information System (INIS)

Gatti, Luciana V.; Mozeto, Antonio A.; Artaxo, Paulo

1999-01-01

Lakes are ecosystems where there is a great potential of metal accumulation in sediments due to their depositional characteristics. Total concentration of trace elements was measured on a 50 cm long sediment core from the Infernao Lake, that is an oxbow lake of the Moji-Guacu River basin, in the state of Sao Paulo, Brazil. Dating of the core shows up to 180 yrs old sediment layers. The use of the PIXE technique for elemental analysis avoids the traditional acid digestion procedure common in other techniques. The multielemental characteristic of PIXE allows a simultaneous determination of about 20 elements in the sediment samples, such as, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Rb, Sr, Zr, Ba, and Pb. Average values for the elemental composition were found to be similar to the bulk crustal composition. The lake flooding pattern strongly influences the time series of the elemental profiles. Factor analysis of the elemental variability shows five factors. Two of the factors represent the mineralogical matrix, and others represent the organic component, a factor with lead, and another loaded with chromium. The mineralogical component consists of elements such as, Fe, Al, V, Ti, Mn, Ni, K, Zr, Sr, Cu and Zn. The variability of Si is explained by two distinct factors, because it is influenced by two different sources, aluminum-silicates and quartz, and the effect of inundation are different for each other. The organic matter is strongly associated with calcium, and also bounded with S, Zn, Cu and P. Lead and chromium appears as separated factors, although it is not clear the evidences for their anthropogenic origin. The techniques developed for sample preparation and PIXE analysis was proven as advantageous and provided very good reproducibility and accuracy

Mineralogical and chemical characterization of various bentonite and smectite-rich clay materials Part A: Comparison and development of mineralogical characterization methods Part B: Mineralogical and chemical characterization of clay materials

International Nuclear Information System (INIS)

Kumpulainen, S.; Kiviranta, L.

2010-06-01

Mineralogy is an essential issue in understanding thermo-hydro-mechanical-chemical (THMC) behavior of bentonite materials. Mineralogy affects, among others, chemical composition of pore water, susceptibility for erosion, and transport of radionuclides. Consequently, mineralogy affects the designs of the buffer and backfill components. The objective of this work was to implement and develop mineralogical and chemical methods for characterization of reference clays considered for use as buffer and backfill materials in nuclear waste disposal. In this work, different methods were tested, compared, developed, and best available techniques selected. An additional aim was to characterize reference materials that are used in various nuclear waste disposal supporting studies, e.g., the SKB's alternative buffer material (ABM) experiment. Materials studied included three Wyoming-bentonites, two bentonites from Milos, four bentonites from Kutch district, and two Friedland clays. Minerals were identified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and polarizing microscopy. Mineralogical composition was estimated using Rietveld-analysis. Chemical methods were used to support and validate mineralogical interpretation. Total chemical composition was determined from decomposed samples using spectrometry (ICP-AES) and combustion (Leco-S, Leco-C). Ferric and ferrous iron species were distinguished titrimetrically and the amount of soluble sulphate was determined using ion chromatography. In addition, cation exchange capacity and original exchangeable cations were determined. Chemical composition of fine (<2 μ m) fractions and poorly crystalline Fe-, Al- and Si-phases determined by selective extractions were used in structural calculations of smectite. XRD is a basic method for all mineralogical characterization, but it is insensitive for detecting trace minerals and variations in the structural chemical composition of clay minerals. Polarizing

Mineralogy and petrography of samples of Permo-Triassic sedimentary strata from Cumbria

International Nuclear Information System (INIS)

Kemp, S.J.; Milodowski, A.E.; Bloodworth, A.J.

1989-03-01

The mineralogy and petrography of Permo-Triassic sediments from Cumbria are described. The samples are duplicates of those selected for sorption experiments by Harwell Laboratory and are considered representative of Permo-Triassic strata underlying the BNFL Sellafield site. The regional geological context of the samples is briefly discussed. X-ray diffraction analysis indicates that the St Bees Sandstone and Eden Shales samples are predominantly composed of quartz with minor feldspar, gypsum and hematite. The clay assemblage is formed of dioctahedral mica and trioctahedral chloride with minor kaolinite. Diagnostic testing also reveals the presence of corrensite, a regularly interstratified chlorite-smectite, in one of the samples. Possible diagenetic processes responsible for corrensite formation, including the alteration of originally deposited smectite by magnesium-rich pore waters, are discussed. Modelling of the diffraction profile indicates that the chlorite and corrensite are iron-rich species. Back scattered electron microscopy shows the samples to be typical red bed sediments exhibiting framework grain dissolution, the breakdown and replacement of unstable ferromagnesian minerals being accompanied by the precipitation of hematite and anatase. Particle-size analysis shows similar distributions for the St Bees Sandstone samples but a greater proportion of clay material in the Eden Shales. (author)

Clay mineralogy indicates the muddy sediment provenance in the estuarine-inner shelf of the East China Sea

Science.gov (United States)

Zhao, Yifei; Zou, Xinqing; Liu, Qing; Wang, Chenglong; Ge, Chendong; Xu, Min

2018-02-01

The estuarine-inner shelf mud regions of the East China Sea (ECS) are valuable for studying the source-to-sink processes of fluvial sediments deposited since the Holocene. In this study, we present evidence of the provenance and environmental evolution of two cores (S5-2 and JC07) from the estuarine-inner shelf regions of the ECS over the past 100 years based on 210Pb dating, high-resolution grain size measurements and clay mineral analyses. The results indicate that the clay mineral assemblages of cores S5-2 and JC07 are dominated by illite, followed by kaolinite and chlorite, and present scarce amounts of smectite. A comparison of these clay mineral assemblages with several major sources reveals that the fine sediments on the estuarine-inner shelf of the ECS represent a mixture of provenances associated with the Yangtze and Yellow Rivers, as well as smaller rivers. However, the contribution of each provenance has varied greatly over the past hundred years, as indicated by the down-core variability due to strong sediment reworking and transport on the inner shelf and the reduction of the sediment load from the Yangtze River basin. In the mud region of the Yangtze River estuary, the sediment from 1930 to 1956 was primarily derived from the Yangtze River, although the Yellow River was also an important influence. From 1956 to 2013, the Yellow River contribution decreased, whereas the Yangtze River contribution correspondingly increased. In the Zhe-Min mud region, the Yangtze River contributed more sediment than did other rivers from 1910 to 1950; however, the Yangtze River contribution gradually decreased from 1950 to 2013. Moreover, the other small rivers accounted for minor contributions, and the East Asian winter monsoon (EAWM) played an important role in the sediment transport process in the ECS. Our results indicate that the weakening/strengthening of the EAWM and a decrease in the sediment load of the Yangtze River influenced the transport and fate of sediment

Radionuclide activities, geochemistry, and accumulation rates of sediments in the Gulf of Thailand

International Nuclear Information System (INIS)

Srisuksawad, K.; Porntepkasemsan, B.; Nouchpramool, S.; Yamkate, P.; Carpenter, R.; Peterson, M.L.; Hamilton, T.

1997-01-01

Downcore concentration profiles of 210 Pb , U, and Th isotopes, Al, Fe, Ti, Mn and Sc were measured in sediment box cores collected at 22 stations (16-70 m water depth) covering most of the Thai zone of the Gulf of Thailand. Distributions of excess 210 Pb and the detrital elements were used to study spatial variations in sedimentary processes, mineralogy, and geochemistry between different regions of the gulf. Steady-state depositional concentrations and fluxes of excess 210 Pb are 3-10 times lower in Gulf of Thailand sediments than in sediments from mid-latitudes in the northern hemisphere, reflecting lower 210 Pb inputs from atmospheric fallout at 6-13 o N latitude and from lower production of 210 Pb from 226 Ra in the shallower waters of the Gulf. U and Th concentrations are approximately 2-3 times higher than those in shelf sediments from mid-latitudes of North America, consistent with a higher proportion of granitic source rocks in the Thai environment. Downcore variations in 228 Th/ 232 Th activity ratios and in U activities reveal that exchange of interstitial and overlying waters and their dissolved chemicals occurs down to 20 cm in 8 of 10 cores. This benthic exchange may be important in budgets of fluxes of other soluble chemicals in this shallow shelf sea. A net flux of U isotopes from overlying water into Gulf of Thailand sediments occurs in contrast to their release from sediments of the tropical Amazon shelf. Detectable levels of 137 Cs were found only in sediments near the mouth of the largest river, the Chao Phraya. The detrital elements 232 Th, 230 Th, Al, Ti, and Sc all show relatively uniform downcore concentration profiles. This supports a key assumption in calculations of sediment accumulation rates from downcore profiles of 210 Pb activity, that steady-state depositional conditions exist and that basic sediment mineralogy and grain size does not change. 210 Pb model derived mass accumulation rates vary between 270 and 490 mg/cm 2 per year in

Comparison among chemical, mineralogical and physical analysis from alluvial clays from counties of Southwest of Minas Gerais state (Brazil)

International Nuclear Information System (INIS)

Gaspar Junior, L.A.; Varajao, A.F.D.C.; Souza, M.H.O.; Moreno, M.M.T.

2011-01-01

The studied area is located in the southwestern portion of Minas Gerais State, encompassing the counties of Alfenas, Areado, Machado, Poco Fundo, Campestre, Serrania, Monte Belo, Bandeira do Sul, Botelhos and Cabo Verde. This region is dominated by strongly weathered pre-cambrian rocks in association with colluvial-alluvial sediments. The present work consisted in a comparison among the mineralogical (X-Ray Diffraction), textural (Laser Granulometry), chemical (X-Ray Fluorescence) and technological (mechanical resistance, water absorption, etc, made in specimen tests) properties of the clays collected on potteries located in these counties. The mineralogical and chemical analysis displayed the kaolinitic nature of the clays from this region, showing also small amount of interlayered clays and large amount of quartz. The best results of physical analysis were obtained for clays from the counties of Cabo Verde and Monte Belo due to the presence of lower values of SiO 2 (quartz) associated with a finer particle size distribution. (author)

Contribution to chemical-mineralogical study of carbonatites

International Nuclear Information System (INIS)

Costa, M.Q. da; Lima, W.N. de; Correa, S.L.A.

1982-01-01

A preliminary chemical-mineralogical study of carbonatites from Jacupiranga (SP,Brazil) and Alto Pinheiros (SC,Brazil) enabled not only to ratify hypotheses previously described by Brazilian researchers but also made clear certain aspects related to the geochemistry of carbonatites concerning their occurrence, the probable genesis of these species and their chemical and mineralogical characteristics.(Author) [pt

Mineralogy of the rare earth elements

International Nuclear Information System (INIS)

Clark, A.M.

1984-01-01

This paper contains mineralogic properties of the rare earth elements (REE). Notes are given on total REE abundances, distribution patterns, and modes of occurrence. References are confined as far as possible to papers containing usable REE data. The minerals are grouped alphabetically within each major cationic group. The paper includes an alphabetic table of mineral names, chemical formulas, crystal system and section number. It functions as a handy entrance to the mineralogic and bibliographic paper. (G.J.P.)

A cave response to environmental changes in the Late Pleistocene: a study of Budimirica Cave sediments, Macedonia

Czech Academy of Sciences Publication Activity Database

Temovski, M.; Pruner, Petr; Hercman, H.; Bosák, Pavel

2016-01-01

Roč. 69, č. 3 (2016), s. 307-316 ISSN 1330-030X Institutional support: RVO:67985831 Keywords : cave sediments * palaeoenvironmental changes * Late Pleistocene * Budimirica Cave * Macedonia Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.595, year: 2016 http://www. geologia -croatica.hr/ojs/index.php/GC

Influência de formas do relevo em atributos físicos de um latossolo sob cultivo de cana-de-açúcar Influence of the relief forms on physical attributes of an oxisol cropped with sugarcane

Directory of Open Access Journals (Sweden)

Liziane de Figueiredo Brito

2006-12-01

Full Text Available Os atributos físicos do solo variam em função das formas do relevo e sofrem influência da mineralogia da fração argila e do manejo da cultura de cana-de-açúcar, podendo interferir no processo de compactação do solo. Este trabalho foi realizado com o objetivo de avaliar o estado dos atributos físicos em diferentes formas do relevo em um Latossolo Vermelho eutroférrico argiloso sob cultivo de cana-de-açúcar. A área apresenta duas formas de relevo: uma côncava, que ocorre nas posições mais elevadas, e uma linear, constituída pelos segmentos ombro, escarpa, meia encosta e encosta inferior. As amostras de solo foram coletadas durante o ciclo da cultura, nas camadas de 0,00-0,15m, 0,15-0,30m e 0,30-0,45m, para determinação do teor de matéria orgânica e dos seguintes atributos físicos: densidade do solo, porosidade total, macroporosidade, microporosidade, resistência do solo à penetração e teor de água no solo. A mineralogia mais gibbsítica e o maior teor de matéria orgânica, encontrada na forma de relevo côncava e de segmento ombro, proporciona menores valores de densidade do solo, de resistência do solo à penetração e de microporosidade e maiores valores de macroporosidade e de porosidade total do que a mineralogia mais caulinítica, encontrada nos demais segmentos da forma linear.The physical attributes of the soil vary according to the relief forms and suffer from the mineralogy of the clay fraction and the management of the sugarcane culture, being able to influence the soil compaction process. This research was developed in Jaboticabal-SP, aiming at evaluating the behavior of physical attributes in different relief forms in an oxisol cropped with sugarcane. The area presents two relief forms (concave and linear, the concave one, that occurs at the highest positions, and the linear one, consisting of shoulder, scarp, stocking lean and inferior lean segments. The samples soil were collected during the sugarcane

Mineralogia, morfologia e análise microscópica de solos do bioma cerrado Mineralogy, morphology and microscopic analysis of soils of the cerrado biome

Directory of Open Access Journals (Sweden)

J. B. V. Gomes

2004-08-01

Full Text Available As características macro e micromorfológicas dos horizontes diagnósticos superficiais e subsuperficiais de Latossolos e Neossolos Quartzarênicos das superfícies Sul-Americana e Velhas foram estudadas em perfis sob cobertura de vegetação nativa, visando estabelecer um referencial para futuras comparações com áreas similares sob constante intervenção antrópica em termos de sustentabilidade. Com os solos referenciados por sub-região e pela superfície geomórfica que representam, três agrupamentos foram constituídos: Grupo 1: solos de textura argilosa a muito argilosa e hipo a mesoférricos; Grupo 2: solos de textura média a arenosa e hipoférricos, e Grupo 3: solos de textura argilosa a muito argilosa e férricos. O horizonte Bw dos Latossolos argilosos e muito argilosos estudados (Grupos 1 e 3, com relações cauliníticas/(caulinita + gibbsita variando de 0,27 a 0,77, apresentaram grande coincidência de estrutura e microestrutura, respectivamente, forte muito pequena granular e de microagregados. Os solos do Grupo 2, Latossolos de textura média e um Neossolo Quartzarênico, apresentaram o plasma preferencialmente como películas aderidas aos grãos que dominam o fundo matricial. A presença marcante de agregados na fração areia, resistentes ao tratamento para dispersão da terra fina, se deu apenas nos Latossolos argilosos e muito argilosos do Grupo 3 (com caráter férrico e em parte do Grupo 1 (naqueles mais gibbsíticos. No leste de Goiás, o horizonte Bw dos perfis de G2, Latossolos Amarelos de mineralogia gibbsítica e isenta de hematita, apresentaram feições observadas em lâmina delgada de cor vermelha e agregados residuais da fração areia com hematita detectada pela difração de raios-X, aspectos que corroboram a hipótese de um pedoambiente mais úmido dessa posição na paisagem relativamente à posição G1, com perfis de Latossolos Vermelhos.The macro and micromorphological characteristics of the surface and

Automated Quantitative Rare Earth Elements Mineralogy by Scanning Electron Microscopy

Science.gov (United States)

Sindern, Sven; Meyer, F. Michael

2016-09-01

Increasing industrial demand of rare earth elements (REEs) stems from the central role they play for advanced technologies and the accelerating move away from carbon-based fuels. However, REE production is often hampered by the chemical, mineralogical as well as textural complexity of the ores with a need for better understanding of their salient properties. This is not only essential for in-depth genetic interpretations but also for a robust assessment of ore quality and economic viability. The design of energy and cost-efficient processing of REE ores depends heavily on information about REE element deportment that can be made available employing automated quantitative process mineralogy. Quantitative mineralogy assigns numeric values to compositional and textural properties of mineral matter. Scanning electron microscopy (SEM) combined with a suitable software package for acquisition of backscatter electron and X-ray signals, phase assignment and image analysis is one of the most efficient tools for quantitative mineralogy. The four different SEM-based automated quantitative mineralogy systems, i.e. FEI QEMSCAN and MLA, Tescan TIMA and Zeiss Mineralogic Mining, which are commercially available, are briefly characterized. Using examples of quantitative REE mineralogy, this chapter illustrates capabilities and limitations of automated SEM-based systems. Chemical variability of REE minerals and analytical uncertainty can reduce performance of phase assignment. This is shown for the REE phases parisite and synchysite. In another example from a monazite REE deposit, the quantitative mineralogical parameters surface roughness and mineral association derived from image analysis are applied for automated discrimination of apatite formed in a breakdown reaction of monazite and apatite formed by metamorphism prior to monazite breakdown. SEM-based automated mineralogy fulfils all requirements for characterization of complex unconventional REE ores that will become

Mineralogical and geochemical patterns of urban surface soils, the example of Pforzheim, Germany

International Nuclear Information System (INIS)

Norra, Stefan; Lanka-Panditha, Mahesh; Kramar, Utz; Stueben, Doris

2006-01-01

This study presents a combined geochemical and mineralogical survey of urban surface soils. Many studies on urban soils are restricted to purely chemical surveys in order to investigate soil pollution caused by anthropogenic activities such as traffic, heating, industrial processing, waste disposal and many more. In environmental studies, chemical elements are often distinguished as lithogenic and anthropogenic elements. As a novel contribution to those studies, the authors combined the analysis of a broad set of chemical elements with the analysis of the main mineralogical phases. The semi-quantification of mineralogical phases supported the assignment of groups of chemical elements to lithogenic or anthropogenic origin. Minerals are important sinks for toxic elements. Thus, knowledge about their distribution in soils is crucial for the assessment of the environmental hazards due to pollution of urban soils. In Pforzheim, surface soils (0-5 cm depth) from various land use types (forest, agriculture, urban green space, settlement areas of various site densities) overlying different geological units (clastic and chemical sediments) were investigated. Urban surface soils of Pforzheim reflect to a considerable degree the mineral and chemical composition of parent rocks. Irrespective of the parent rocks, elevated concentrations of heavy metals (Zn, Cu, Pb, Sn, Ag) were found in soils throughout the whole inner urban settlement area of Pforzheim indicating pollution. These pollutants will tend to accumulate in inner urban surface soils according to the available adsorption capacity, which is normally higher in soils overlying limestone than in soils overlying sandstone. However, inner urban surface soils overlying sandstone show elevated concentrations of carbonates, phyllo-silicates and Fe and elevated pH values compared with forest soils overlying sandstone. Thus, in comparison to forest soils overlying sandstones, inner urban soils overlying sandstone affected by

Natural equilibria and anthropic effects on sediment transport in big river systems: The Nile case

Science.gov (United States)

Garzanti, Eduardo; Andò, Sergio; Padoan, Marta; Vezzoli, Giovanni; Villa, Igor

2014-05-01

The Nile River flows for ~ 6700 km, from Burundi and Rwanda highlands south of the Equator to the Mediterranean Sea at northern subtropical latitudes. It is thus the longest natural laboratory on Earth, a unique setting in which we are carrying out a continuing research project to investigate changes in sediment composition associated with a variety of chemical and physical processes, including weathering in equatorial climate and hydraulic sorting during transport and deposition. Petrographic, mineralogical, chemical, and isotopic fingerprints of sand and mud have been monitored along all Nile branches, from the Kagera and White Nile draining Archean, Paleoproterozoic and Mesoproterozoic basements uplifted along the western branch of the East African rift, to the Blue Nile and Atbara Rivers sourced in Ethiopian volcanic highlands made of Oligocene basalt. Downstream of the Atbara confluence, the Nile receives no significant tributary water and hardly any rainfall across the Sahara. After construction of the Aswan High Dam in 1964, the Nile ceased to be an active conveyor-belt in Egypt, where the mighty river has been tamed to a water canal; transported sediments are thus chiefly reworked from older bed and levee deposits, with minor contributions from widyan sourced in the Red Sea Hills and wind-blown desert sand and dust. Extensive dam construction has determined a dramatic sediment deficit at the mouth, where deltaic cusps are undergoing ravaging erosion. Nile delta sediments are thus recycled under the effect of dominant waves from the northwest, the longest Mediterranean fetch direction. Nile sands, progressively enriched in more stable minerals such as quartz and amphiboles relative to volcanic rock fragments and pyroxene, thus undergo multistep transport by E- and NE-directed longshore currents all along the coast of Egypt and Palestine, and are carried as far as Akko Bay in northern Israel. Nile mud reaches the Iskenderun Gulf in southern Turkey. A full

The fate of moderately volatile elements in impact events—Lithium connection between the Ries sediments and central European tektites

Czech Academy of Sciences Publication Activity Database

Rodovská, Z.; Magna, T.; Žák, Karel; Skála, Roman; Brachaniec, T.; Visscher, Ch.

2016-01-01

Roč. 51, č. 12 (2016), s. 2403-2415 ISSN 1086-9379 R&D Projects: GA ČR GA13-22351S Institutional support: RVO:67985831 Keywords : tektites * Ries sediments * Li Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.391, year: 2016

Fluctuation in glacial and interglacial sediment discharge of the River Indus as seen in the core from the Arabian Sea

Digital Repository Service at National Institute of Oceanography (India)

Guptha, M.V.S.; Hashimi, N.H.

Sediment core from the upper continental slope off Saurashtra Coast has been analysed for CaCO sub(3) and coarse fraction contents in addition to planktonic foraminifera and clay mineralogy. Based on CaCO sub(3) and planktonic foraminiferal data a...

Modern sedimentation patterns in Lake El'gygytgyn, NE Russia, derived from surface sediment and inlet streams samples

Directory of Open Access Journals (Sweden)

V. Wennrich

2013-01-01

Full Text Available Lake El'gygytgyn/NE Russia holds a continuous 3.58 Ma sediment record, which is regarded as the most long-lasting climate archive of the terrestrial Arctic. Based on multi-proxy geochemical, mineralogical, and granulometric analyses of surface sediment, inlet stream and bedrock samples, supplemented by statistical methods, major processes influencing the modern sedimentation in the lake were investigated. Grain-size parameters and chemical elements linked to the input of feldspars from acidic bedrock indicate a wind-induced two-cell current system as major driver of sediment transport and accumulation processes in Lake El'gygytgyn. The distribution of mafic rock related elements in the sediment on the lake floor can be traced back to the input of weathering products of basaltic rocks in the catchment. Obvious similarities in the spatial variability of manganese and heavy metals indicate sorption or co-precipitation of these elements with Fe and Mn hydroxides and oxides. But the similar distribution of organic matter and clay contents might also point to a fixation to organic components and clay minerals. An enrichment of mercury in the inlet streams might be indicative of neotectonic activity around the lake. The results of this study add to the fundamental knowledge of the modern lake processes of Lake El'gygytgyn and its lake-catchment interactions, and thus, yield crucial insights for the interpretation of paleo-data from this unique archive.

Source rock identification of sediments using trace element ratios and 13C isotope data - a case study from Pondicherry region

International Nuclear Information System (INIS)

Tirumalesh, K.; Kulkarni, U.P.; Singh, Gursharan; Ramakumar, K.L.; Chidambaram, S.

2012-01-01

Compositional characteristics of source rocks are generally well recorded in sedimentary deposits and provide valuable information about nature of source rocks even though weathering, physical sorting and deposition environment influence the sediment geochemistry. In this paper we report major, trace element and 13 C isotope data of cutting samples collected from Quaternary, Tertiary and Cretaceous formations in Pondicherry area. The distribution patterns and inter elemental correlations are used to identify source rock composition and carbon isotope compositions to understand the sediment deposition conditions. Mineralogy of the bulk sediment indicates presence of Quartz, K-feldspar, Calcite, Mg-calcite, Aragonite and Clay minerals. Compared to upper continental crust values most of these sediments show lower concentration of all elements except Ca and Zn at some depths. The depletion is probably associated with weathering of feldspar and removal of elements through solution. This also increases the proportion of quartz relative to source rock. The ratios of redox sensitive elements (Th/U) infer oxic weathering in shallow sediments. Elemental ratios (La/Sc, Th/Sc, Th/Cr, Th/Co) and ternary plots (La-Th-Sc and Th-Hf-Co) indicate contribution of felsic source rocks with varying degree of weathering. These plots also infer the inherent heterogeneity in the source rocks. Hafnium correlations with other trace elements suggest contribution of Tonalitic rocks in addition to granite to these sediments. The geochemical characteristics of the sediments are found to be similar to that of sediments belonging to similar geology in nearby regions. Presence of shallow marine condition during the sedimentation is inferred from the detrital index (DI) values, which is further supported by the presence of fibrous clay minerals in ESEM scans. This study also brings out the utility of δ 13 C information to reinforce the geochemical and mineralogical inferences. (author)

X-ray Spectroscopy and Magnetism in Mineralogy

Science.gov (United States)

Sainctavit, Philippe; Brice-Profeta, Sandrine; Gaudry, Emilie; Letard, Isabelle; Arrio, Marie-Anne

The objective of this paper is to present the kind of information that can be gained in the field of mineralogy from the use of x-ray magnetic spectroscopies. We review some of the questions that are unsettled and that could benefit from an interdisciplinary approach where magnetism, spectroscopy and mineralogy could be mixed. Most of the attention is focused on iron and some other 3d transition elements. The mineralogy of planetary cores and its relation with known meteorites are exemplified. The various oxide phases in the mantle and the nature of iron in these phases is also underlined. The presence of transition elements in insulating minerals and its relation with macroscopic properties such as the color of gemstones are reviewed. Finally an introduction to paleomagnetism is given with a special attention to nanomaghemites.

Anoxia stimulates microbially catalyzed metal release from Animas River sediments.

Science.gov (United States)

Saup, Casey M; Williams, Kenneth H; Rodríguez-Freire, Lucía; Cerrato, José M; Johnston, Michael D; Wilkins, Michael J

2017-04-19

The Gold King Mine spill in August 2015 released 11 million liters of metal-rich mine waste to the Animas River watershed, an area that has been previously exposed to historical mining activity spanning more than a century. Although adsorption onto fluvial sediments was responsible for rapid immobilization of a significant fraction of the spill-associated metals, patterns of longer-term mobility are poorly constrained. Metals associated with river sediments collected downstream of the Gold King Mine in August 2015 exhibited distinct presence and abundance patterns linked to location and mineralogy. Simulating riverbed burial and development of anoxic conditions, sediment microcosm experiments amended with Animas River dissolved organic carbon revealed the release of specific metal pools coupled to microbial Fe- and SO 4 2- -reduction. Results suggest that future sedimentation and burial of riverbed materials may drive longer-term changes in patterns of metal remobilization linked to anaerobic microbial metabolism, potentially driving decreases in downstream water quality. Such patterns emphasize the need for long-term water monitoring efforts in metal-impacted watersheds.

Anoxia stimulates microbially catalyzed metal release from Animas River sediments

International Nuclear Information System (INIS)

Saup, Casey M.; Williams, Kenneth H.; Rodríguez-Freire, Lucía; Cerrato, José M.; Johnston, Michael D.; Wilkins, Michael J.

2017-01-01

The Gold King Mine spill in August 2015 released 11 million liters of metal-rich mine waste to the Animas River watershed, an area that has been previously exposed to historical mining activity spanning more than a century. Although adsorption onto fluvial sediments was responsible for rapid immobilization of a significant fraction of the spill-associated metals, patterns of longer-term mobility are poorly constrained. Metals associated with river sediments collected downstream of the Gold King Mine in August 2015 exhibited distinct presence and abundance patterns linked to location and mineralogy. Simulating riverbed burial and development of anoxic conditions, sediment microcosm experiments amended with Animas River dissolved organic carbon revealed the release of specific metal pools coupled to microbial Fe- and SO 4 2- reduction. Results suggest that future sedimentation and burial of riverbed materials may drive longer-term changes in patterns of metal remobilization linked to anaerobic microbial metabolism, potentially driving decreases in downstream water quality. Such patterns emphasize the need for long-term water monitoring efforts in metal-impacted watersheds.

Impact of tsunami on texture and mineralogy of a major placer deposit in southwest coast of India

Science.gov (United States)

Babu, N.; Babu, D. S. Suresh; Das, P. N. Mohan

2007-03-01

The great Indonesian earth quake (26 December 2004) triggered a tsunami wave across the Bay of Bengal and Indian Ocean basins and has brought a major havoc in several countries including India. The coastal segment between Thotapalli and Valiazhikal in Kerala state of southwest India, where considerably rich beach placer deposit with ilmenite percentage of more than 70% is concentrated, has been investigated to understand the impact of tsunami on coastal sediments. The grain size analysis flashes out the significant differences between the pre- and post-tsunami littoral environments. While the mineral grains collected during pre-tsunami period show well-sorted nature, the post-tsunami samples represent moderately to poorly sorted nature. Similarly, unimodal and bimodal distributions of the sediments have been recorded for pre- and post-tsunami sediments, respectively. Further, mineral assemblages corresponding to before and after this major wave activity clearly indicate the large-scale redistribution of sediments. The post-tsunami sediments register increasing trends of garnet, sillimanite and rutile. The total heavy mineral percentage of the post-tsunami sediment also shows an improved concentration, perhaps due to the large-scale transport of lighter fraction. Magnetite percentage of post-tsunami samples reflects higher concentration compared to the pre-tsunami samples, indicating the intensity of reworking process. X-ray diffraction patterns of ilmenite grains have confirmed the increased presence of pseduorutile, and pseudobrookite in post-tsunami samples, which could be due to the mixing of more altered grains. SEM examination of grains also confirms the significant alteration patterns on the ubiquitous mineral of placer body, the ilmenite. The reason for these textural, mineralogical and micromorphological changes in heavy minerals particularly in ilmenite, could be due to the churning action on the deeper sediments of onshore region or on the sediments

Environmental record in detrital cave sediments in the Botovskaya and Dolganskaya Jama caves (Russian Federation)

Czech Academy of Sciences Publication Activity Database

Lisá, Lenka; Kadlec, Jaroslav; Chadima, Martin; Hercman, H.; Oberhansli, H.; Osincev, A.

2006-01-01

Roč. 8, - (2006), A10273-A10273 ISSN 1029-7006. [European Geosciences Union General Assembly. 02.04.2006-07.04.2006, Vienna] Institutional research plan: CEZ:AV0Z30130516 Keywords : cave * sediments * micromorphology * magnetic properties * provenance Subject RIV: DB - Geology ; Mineralogy http://www.cosis.net/abstracts/EGU06/10273/EGU06-J-10273-2.pdf

Animal-sediment interactions: the effect of ingestion and excretion by worms on mineralogy

Directory of Open Access Journals (Sweden)

S. J. Needham

2004-01-01

Full Text Available By controlled experiments that simulate marine depositional environments, it is shown that accelerated weathering and clay mineral authigenesis occur during the combined process of ingestion, digestion and excretion of fine-grained sediment by two species of annelid worms. Previously characterized synthetic mud was created using finely ground, low-grade metamorphic slate (temperature approximately 300°C containing highly crystalline chlorite and muscovite. This was added to experiment and control tanks along with clean, wind-blown sand. Faecal casts were collected at regular intervals from the experimental tanks and, less frequently, from the control tanks. Over a period of many months the synthetic mud (slate proved to be unchanged in the control tanks, but was significantly different in faecal casts from the experimental tanks that contained the worms Arenicola marina and Lumbricus terrestris. Chlorite was preferentially destroyed during digestion in the gut of A. marina. Both chlorite and muscovite underwent XRD peak broadening with a skew developing towards higher lattice spacing, characteristic of smectite formation. A neoformed Fe-Mg-rich clay mineral (possibly berthierine and as-yet undefined clay minerals with very high d-spacing were detected in both A. marina and L. terrestris cast samples. We postulate that a combination of the low pH and bacteria-rich microenvironment in the guts of annelid worms may radically accelerate mineral dissolution and clay mineral precipitation processes during digestion. These results show that macrobiotic activity significantly accelerates weathering and mineral degradation as well as mineral authigenesis. The combined processes of sediment ingestion and digestion thus lead to early diagenetic growth of clay minerals in clastic sediments.

Sedimentární vývoj pozdně glaciálních jezer u Veselí nad Lužnicí

Czech Academy of Sciences Publication Activity Database

Hošek, J.; Prach, J.; Šída, P.; Houfková, P.; Vondrák, D.; Lisá, Lenka; Pokorný, P.; Chvojka, O.; Dohnal, J.

2016-01-01

Roč. 49, č. 1 (2016), s. 157-164 ISSN 0514-8057 Institutional support: RVO:67985831 Keywords : lake sediments * Last Glacial Maximum * Late Glacial * Třeboň Basin * erosion- deposition processes Subject RIV: DB - Geology ; Mineralogy

Mineralogy: a modern approach to teaching a traditional discipline

Science.gov (United States)

Cook, G. W.

2011-12-01

Mineralogy has traditionally been a primary component in undergraduate geoscience curriculum. In recent years, there has been a trend in which mineralogy and petrology have been combined into Earth Materials courses. This is unfortunate as these disciplines each have much to offer students, and content once considered essential is eliminated out of necessity. Mineralogy is still fundamental to students' understanding of the Earth and Earth processes. Using a modern approach to time-honored concepts, I teach a quarter-long Introductory Mineralogy class offered through the Scripps Institution of Oceanography at the University of California, San Diego. Student evaluations of this course unequivocally indicate a high degree of learning and interest in the material, confirming that mineralogy continues to be a valuable class into the 21st century. While much of the content remains similar to what has been taught over the last century, my strategy involves a well-balanced approach to old and new. The first third of the course is background including the relevance of mineralogy, crystal chemistry, and crystallography; the second third of the course is systematic mineralogy using the Dana system; the last third of the course is devoted to understanding optical mineralogy, using modern analytical equipment such as XRD and SEM, and learning to use the petrographic microscope. Throughout the quarter, a strong emphasis is placed on the importance of hand-sample identification. Field work, traditionally not emphasized in mineralogy courses, has been re-introduced to the curriculum. I use modern technology to facilitate and support student learning. A lecture-based approach is employed with carefully crafted and organized PowerPoint presentations. PowerPoint lectures can be effective and highly engaging. The key is to ensure that the lectures are not overly reliant on text, instead relying on diagrams, charts, photos, and embedded media such as 3-D animations (ex. to teach

Hydrate bearing clayey sediments: Formation and gas production concepts

KAUST Repository

Jang, Jaewon; Santamarina, Carlos

2016-01-01

Hydro-thermo-chemo and mechanically coupled processes determine hydrate morphology and control gas production from hydrate-bearing sediments. Force balance, together with mass and energy conservation analyses anchored in published data provide robust asymptotic solutions that reflect governing processes in hydrate systems. Results demonstrate that hydrate segregation in clayey sediments results in a two-material system whereby hydrate lenses are surrounded by hydrate-free water-saturated clay. Hydrate saturation can reach ≈2% by concentrating the excess dissolved gas in the pore water and ≈20% from metabolizable carbon. Higher hydrate saturations are often found in natural sediments and imply methane transport by advection or diffusion processes. Hydrate dissociation is a strongly endothermic event; the available latent heat in a reservoir can sustain significant hydrate dissociation without triggering ice formation during depressurization. The volume of hydrate expands 2-to-4 times upon dissociation or CO2single bondCH4 replacement. Volume expansion can be controlled to maintain lenses open and to create new open mode discontinuities that favor gas recovery. Pore size is the most critical sediment parameter for hydrate formation and gas recovery and is controlled by the smallest grains in a sediment. Therefore any characterization must carefully consider the amount of fines and their associated mineralogy.

Hydrate bearing clayey sediments: Formation and gas production concepts

KAUST Repository

Jang, Jaewon

2016-06-20

Hydro-thermo-chemo and mechanically coupled processes determine hydrate morphology and control gas production from hydrate-bearing sediments. Force balance, together with mass and energy conservation analyses anchored in published data provide robust asymptotic solutions that reflect governing processes in hydrate systems. Results demonstrate that hydrate segregation in clayey sediments results in a two-material system whereby hydrate lenses are surrounded by hydrate-free water-saturated clay. Hydrate saturation can reach ≈2% by concentrating the excess dissolved gas in the pore water and ≈20% from metabolizable carbon. Higher hydrate saturations are often found in natural sediments and imply methane transport by advection or diffusion processes. Hydrate dissociation is a strongly endothermic event; the available latent heat in a reservoir can sustain significant hydrate dissociation without triggering ice formation during depressurization. The volume of hydrate expands 2-to-4 times upon dissociation or CO2single bondCH4 replacement. Volume expansion can be controlled to maintain lenses open and to create new open mode discontinuities that favor gas recovery. Pore size is the most critical sediment parameter for hydrate formation and gas recovery and is controlled by the smallest grains in a sediment. Therefore any characterization must carefully consider the amount of fines and their associated mineralogy.

Multiscale characteristics of mechanical and mineralogical heterogeneity using nanoindentation and Maps Mineralogy in Mancos Shale

Science.gov (United States)

Yoon, H.; Mook, W. M.; Dewers, T. A.

2017-12-01

Multiscale characteristics of textural and compositional (e.g., clay, cement, organics, etc.) heterogeneity profoundly influence the mechanical properties of shale. In particular, strongly anisotropic (i.e., laminated) heterogeneities are often observed to have a significant influence on hydrological and mechanical properties. In this work, we investigate a sample of the Cretaceous Mancos Shale to explore the importance of lamination, cements, organic content, and the spatial distribution of these characteristics. For compositional and structural characterization, the mineralogical distribution of thin core sample polished by ion-milling is analyzed using QEMSCAN® with MAPS MineralogyTM (developed by FEI Corporoation). Based on mineralogy and organic matter distribution, multi-scale nanoindentation testing was performed to directly link compositional heterogeneity to mechanical properties. With FIB-SEM (3D) and high-magnitude SEM (2D) images, key nanoindentation patterns are analyzed to evaluate elastic and plastic responses. Combined with MAPs Mineralogy data and fine-resolution BSE images, nanoindentation results are explained as a function of compositional and structural heterogeneity. Finite element modeling is used to quantitatively evaluate the link between the heterogeneity and mechanical behavior during nanoindentation. In addition, the spatial distribution of compositional heterogeneity, anisotropic bedding patterns, and mechanical anisotropy are employed as inputs for multiscale brittle fracture simulations using a phase field model. Comparison of experimental and numerical simulations reveal that proper incorporation of additional material information, such as bedding layer thickness and other geometrical attributes of the microstructures, may yield improvements on the numerical predictions of the mesoscale fracture patterns and hence the macroscopic effective toughness. Sandia National Laboratories is a multimission laboratory managed and operated by

The first evidence of trace fossils and pseudo-fossils in the continental interlava volcaniclastic sediments on the Faroe Islands

Czech Academy of Sciences Publication Activity Database

Pokorný, R.; Krmíček, Lukáš; Árting, U. E.

2015-01-01

Roč. 63, č. 1 (2015), s. 45-57 ISSN 2245-7070 Institutional support: RVO:67985831 Keywords : Faroe Islands * trace fossils * pseudo- fossils * volcaniclastic sediments Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.889, year: 2015 http://2dgf.dk/xpdf/bull63-45-57.pdf

Mineralogical composition and functionality of clays used for pottery ...

African Journals Online (AJOL)

Mineralogical composition and functionality of clays used for pottery education by physically challenged learners at the Ikwezi-Lokusa Educational Centre, Eastern Cape, South Africa. ... The clays were mineralogically characterised using Munsell Soil Color Chart, X-ray powder diffractometry (XRPD) and optical microscopy.

Automated mineralogy and petrology - applications of TESCAN Integrated Mineral Analyzer (TIMA)

Czech Academy of Sciences Publication Activity Database

Hrstka, Tomáš; Gottlieb, P.; Skála, Roman; Breiter, Karel; Motl, D.

2018-01-01

Roč. 63, č. 1 (2018), s. 47-63 ISSN 1802-6222 Grant - others:AV ČR(CZ) StrategieAV21/4 Program:StrategieAV Institutional support: RVO:67985831 Keywords : TIMA * Automated SEM/EDS * applied mineralogy * modal analysis * artificial intelligence * neural networks Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Mineralogy Impact factor: 0.609, year: 2016

SITE-94. Mineralogy of the Aespoe site

International Nuclear Information System (INIS)

Andersson, Karin

1996-12-01

The water composition has several impacts on the repository. It will influence the behaviour of the engineered materials (e.g. corrosion). It may also determine the possible solubility and speciation of released radionuclides. It also acts as a transport medium for the released elements. The groundwater composition and the potential development of the composition due to the presence of the repository as well as due to external variations is thus an important issue in a safety analysis. The development of the groundwater composition is strongly dependent on reactions with the minerals present in water bearing fractures. Here equilibrium chemistry may be of importance, but also reaction kinetics is important to the long-term behaviour. Within the SITE-94 project, a safety analysis is performed for the conditions at the Aespoe site. The mineralogy of the area has been evaluated from drill cores at various places at the site. In this report a recommendation for selection of mineralogy to be used in geochemical modelling of the repository is given. Calcite and iron containing minerals dominate the fracture filling mineralogy at the Aespoe site. Some typical fracture filling mineralogies may be identified in the fractures: epidote, chlorite, calcite, hematite, some illite/smectite + quartz, fluorite, pyrite and goethite. In addition to these a number of minor minerals are found in the fractures. Uncertainties in the fracture filling data may be due to problems when taking out the drill cores. Drilling water may remove important clay minerals and sealed fractures may be reopened mechanically and treated as water conducting fractures. The problem of determining the variability of the mineralogy along the flow paths also remains. This problem will never be solved when the investigation is performed by drilling investigation holes

Snežna jama (Slovenia): Interdisciplinary dating of cave sediments and implication for landscape evolution

Czech Academy of Sciences Publication Activity Database

Häuselmann, P.; Mihevc, A.; Pruner, Petr; Horáček, I.; Čermák, Stanislav; Hercman, H.; Sahy, D.; Fiebig, M.; Zupan Hajna, N.; Bosák, Pavel

2015-01-01

Roč. 247, 15 October (2015), s. 10-24 ISSN 0169-555X R&D Projects: GA AV ČR IAA3013201; GA AV ČR IAA300130701 Institutional research plan: CEZ:AV0Z3013912; CEZ:AV0Z30130516 Keywords : cave sediment dating * dating methods * periadriatic fault * Slovenia * speleogenesis Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.813, year: 2015

Gênese de solos derivados de rochas ultramáficas serpentinizadas no sudoeste de Minas Gerais Genesis of soils formed from ultramafic serpentinized rocks in southwestern Minas Gerais (Brazil

Directory of Open Access Journals (Sweden)

Pablo Vidal-Torrado

2006-06-01

presença de minerais primários de fácil decomposição até mesmo na fração argila, com destaque para o talco, clorita trioctaedral e ocorrência limitada de tremolita, sendo esta última abundante na fração silte. Óxidos de Fe, caulinita e os interestratificados de clorita-esmectita e de clorita-vermiculita completam a assembléia mineralógica. A tendência de evolução é para B textural ou para B nítico com mineralogia 1:1 e alto conteúdo de óxidos de Fe. Nas fases iniciais de alteração, os alteromorfos já apresentam composição química similar aos agregados do solo, com forte perda de Mg, Ca e Si e acúmulo relativo de Al e Fe. Nas três situações estudadas, ocorreu um rejuvenescimento superficial por erosão diferencial, que acumulou material grosseiro e removeu os finos, contribuindo para o incremento da relação textural.Soils formed from serpentinized rocks or serpentinites constitute a special group of soils on the earth surface. These rocks present ultramafic characteristics, with more than 70 % mafic minerals (iron and magnesium oxides. The mineralogy of serpentinites is poor in silica and aluminum and very rich in Mg. Only few studies have looked into the morphology, mineralogy, genesis and classification of soils developed on this type of parent material. In the humid-tropical climate of southwestern Minas Gerais state, three representative soil profiles were taken from the Morro do Ferro, in the Greenstone Belt area, on young geomorphic surfaces. They were characterized by macro and micromorphological descriptions, particle size distribution and chemical analysis, and X ray mineralogical analysis of the clay and sand fractions. The geochemical alterations in the soil horizons were characterized by EDRX microanalyses of soil thin sections. The soils were classified as Haplic Phaeozern Eutric Regosol and chromic Cambisol. Although these soils are developed in a climate that favors quick weathering, from a morphological and mineralogical

Uranium Release from Acidic Weathered Hanford Sediments: Single-Pass Flow-Through and Column Experiments.

Science.gov (United States)

Wang, Guohui; Um, Wooyong; Wang, Zheming; Reinoso-Maset, Estela; Washton, Nancy M; Mueller, Karl T; Perdrial, Nicolas; O'Day, Peggy A; Chorover, Jon

2017-10-03

The reaction of acidic radioactive waste with sediments can induce mineral transformation reactions that, in turn, control contaminant fate. Here, sediment weathering by synthetic uranium-containing acid solutions was investigated using bench-scale experiments to simulate waste disposal conditions at Hanford's cribs (Hanford, WA). During acid weathering, the presence of phosphate exerted a strong influence over uranium mineralogy and a rapidly precipitated, crystalline uranium phosphate phase (meta-ankoleite [K(UO 2 )(PO 4 )·3H 2 O]) was identified using spectroscopic and diffraction-based techniques. In phosphate-free system, uranium oxyhydroxide minerals such as K-compreignacite [K 2 (UO 2 ) 6 O 4 (OH) 6 ·7H 2 O] were formed. Single-pass flow-through (SPFT) and column leaching experiments using synthetic Hanford pore water showed that uranium precipitated as meta-ankoleite during acid weathering was strongly retained in the sediments, with an average release rate of 2.67 × 10 -12 mol g -1 s -1 . In the absence of phosphate, uranium release was controlled by dissolution of uranium oxyhydroxide (compreignacite-type) mineral with a release rate of 1.05-2.42 × 10 -10 mol g -1 s -1 . The uranium mineralogy and release rates determined for both systems in this study support the development of accurate U-release models for the prediction of contaminant transport. These results suggest that phosphate minerals may be a good candidate for uranium remediation approaches at contaminated sites.

Uranium Release from Acidic Weathered Hanford Sediments: Single-Pass Flow-Through and Column Experiments

Energy Technology Data Exchange (ETDEWEB)

Wang, Guohui [Pacific Northwest National Laboratory, Richland, Washington 99354, United States; Um, Wooyong [Pacific Northwest National Laboratory, Richland, Washington 99354, United States; Pohang University of Science and Technology (POSTECH), Pohang, South Korea; Wang, Zheming [Pacific Northwest National Laboratory, Richland, Washington 99354, United States; Reinoso-Maset, Estela [Sierra; Washton, Nancy M. [Pacific Northwest National Laboratory, Richland, Washington 99354, United States; Mueller, Karl T. [Pacific Northwest National Laboratory, Richland, Washington 99354, United States; Perdrial, Nicolas [Department; Department; O’Day, Peggy A. [Sierra; Chorover, Jon [Department

2017-09-21

The reaction of acidic radioactive waste with sediments can induce mineral transformation reactions that, in turn, control contaminant fate. Here, sediment weathering by synthetic uranium-containing acid solutions was investigated using bench-scale experiments to simulate waste disposal conditions at Hanford’s cribs, USA. During acid weathering, the presence of phosphate exerted a strong influence over uranium mineralogy and a rapidly precipitated, crystalline uranium phosphate phase (meta-ankoleite [K(UO2)(PO4)·3H2O]) was identified using spectroscopic and diffraction-based techniques. In phosphate-free system, uranium oxyhydroxide minerals such as K-compreignacite [K2(UO2)6O4(OH)6·7H2O] were formed. Single-pass flow-through (SPFT) and column leaching experiments using synthetic Hanford pore water showed that uranium precipitated as meta-ankoleite during acid weathering was strongly retained in the sediments, with an average release rate of 2.67E-12 mol g-1 s-1. In the absence of phosphate, uranium release was controlled by dissolution of uranium oxyhydroxide (compreignacite-type) mineral with a release rate of 1.05-2.42E-10 mol g-1 s-1. The uranium mineralogy and release rates determined for both systems in this study support the development of accurate U-release models for prediction of contaminant transport. These results suggest that phosphate minerals may be a good candidate for uranium remediation approaches at contaminated sites.

Mineralogy and origin of atmospheric particles in the industrial area of Huelva (SW Spain)

Science.gov (United States)

Bernabé, J. M.; Carretero, M. I.; Galán, E.

The mineralogy of atmospheric particles at the confluence of the Tinto and Odiel rivers, south of Huelva (a highly industrialized city in the SW Spain), was characterized in view to identify source origins. In spite of the small amount of sample collected, mineralogical characterization was performed by X-ray diffraction, polarized light microscopy and scanning electron microscopy with EDS analysis system, using an adequate sample preparation methodology. Sedimentable (SP) and aerosols particles were sampled an one-week basis every two months for one year. Quartz, calcite and feldspars were found to be the major minerals in both fractions, and phyllosilicates, dolomite and gypsum were also identified in lower content. Minor mineral particles included barite, apatite, sphalerite and pyrite. SEM studies revealed the additional presence of chalcopyrite in both SP and aerosols, and of chalcocite-covellite, halite and sylvite in the latter. Siderite, hematite and ankerite were only detected in the SP fraction. The concentrations of the previous minerals increased in summer by effect of the limited rain and the resulting scarcity of atmosphere washing. Non-mineral particles detected by SEM in SP and aerosol fractions included spherical, biological and compositionally complex particles. The main source of mineral particles was found to be the soil suspension in addition to the metallurgical and fertilizer production industries in the area.

Geochemical and mineralogical investigation of uranium in multi-element contaminated, organic-rich subsurface sediment

International Nuclear Information System (INIS)

Qafoku, Nikolla P.; Gartman, Brandy N.; Kukkadapu, Ravi K.; Arey, Bruce W.; Williams, Kenneth H.; Mouser, Paula J.; Heald, Steve M.; Bargar, John R.; Janot, Noémie; Yabusaki, Steve; Long, Philip E.

2014-01-01

Highlights: • Subsurface naturally reduced zones (NRZ) contain U and other potential co-contaminants. • The NRZ has a remarkable assortment of chemically complex, potential U hosts. • Micron-scale, multi-contaminant areas were discovered in NRZ. • U(IV) occurs as biogenic UO 2 (82%), or biomass – bound monomeric U(IV) (18%). • NRZs may exhibit contaminant sink-source complex behavior. - Abstract: Subsurface regions of alluvial sediments characterized by an abundance of refractory or lignitic organic carbon compounds and reduced Fe and S bearing minerals, which are referred to as naturally reduced zones (NRZ), are present at the Integrated Field Research Challenge site in Rifle, CO (a former U mill site), and other contaminated subsurface sites. A study was conducted to demonstrate that the NRZ contains a variety of contaminants and unique minerals and potential contaminant hosts, investigate micron-scale spatial association of U with other co-contaminants, and determine solid phase-bounded U valence state and phase identity. The NRZ sediment had significant solid phase concentrations of U and other co-contaminants suggesting competing sorption reactions and complex temporal variations in dissolved contaminant concentrations in response to transient redox conditions, compared to single contaminant systems. The NRZ sediment had a remarkable assortment of potential contaminant hosts, such as Fe oxides, siderite, Fe(II) bearing clays, rare solids such as ZnS framboids and CuSe, and, potentially, chemically complex sulfides. Micron-scale inspections of the solid phase showed that U was spatially associated with other co-contaminants. High concentration, multi-contaminant, micron size (ca. 5–30 μm) areas of mainly U(IV) (53–100%) which occurred as biogenic UO 2 (82%), or biomass – bound monomeric U(IV) (18%), were discovered within the sediment matrix confirming that biotically induced reduction and subsequent sequestration of contaminant U(VI) via

Rb-Sr ages of Precambrian sediments from the Ovruch mountain range, northwestern Ukraine (U.S.S.R.)

International Nuclear Information System (INIS)

Gorokhov, I.M.; Varshavskaya, E.S.; Kutyavin, E.P.; Clauer, N.; Drannik, A.S.

1981-01-01

A mineralogical and Rb-Sr geochronological study of Precambrian sediments and metasediments from the Ovruch mountain range (northwestern Ukraine) shows two distinct events: a slight metamorphism of the Belokorovichi Formation 1575 +- 30 Ma ago which precedes the deposition of the Zbranki Formation at 1389 +- 71 Ma (lambda 87 Rb = 1.42 x 10 -11 y -1 ). (Auth.)

Automated quantitative micro-mineralogical characterization for environmental applications

Science.gov (United States)

Smith, Kathleen S.; Hoal, K.O.; Walton-Day, Katherine; Stammer, J.G.; Pietersen, K.

2013-01-01

Characterization of ore and waste-rock material using automated quantitative micro-mineralogical techniques (e.g., QEMSCAN® and MLA) has the potential to complement traditional acid-base accounting and humidity cell techniques when predicting acid generation and metal release. These characterization techniques, which most commonly are used for metallurgical, mineral-processing, and geometallurgical applications, can be broadly applied throughout the mine-life cycle to include numerous environmental applications. Critical insights into mineral liberation, mineral associations, particle size, particle texture, and mineralogical residence phase(s) of environmentally important elements can be used to anticipate potential environmental challenges. Resources spent on initial characterization result in lower uncertainties of potential environmental impacts and possible cost savings associated with remediation and closure. Examples illustrate mineralogical and textural characterization of fluvial tailings material from the upper Arkansas River in Colorado.

An acoustic method for predicting relative strengths of cohesive sediment deposits

Science.gov (United States)

Reed, A. H.; Sanders, W. M.

2017-12-01

Cohesive sediment dynamics are fundamentally determined by sediment mineralogy, organic matter composition, ionic strength of water, and currents. These factors work to bind the cohesive sediments and to determine depositional rates. Once deposited the sediments exhibit a nonlinear response to stress and they develop increases in shear strength. Shear strength is critically important in resuspension, transport, creep, and failure predictions. Typically, shear strength is determined by point measurements, both indirectly from free-fall penetrometers or directly on cores with a shear vane. These values are then used to interpolate over larger areas. However, the remote determination of these properties would provide continuos coverage, yet it has proven difficult with sonar systems. Recently, findings from an acoustic study on cohesive sediments in a laboratory setting suggests that cohesive sediments may be differentiated using parametric acoustics; this method pulses two primary frequencies into the sediment and the resultant difference frequency is used to determine the degree of acoustic nonlinearity within the sediment. In this study, two marine clay species, kaolinite and montmorillonite, and two biopolymers, guar gum and xanthan gum were mixed to make nine different samples. The samples were evaluated in a parametric acoustic measurement tank. From the parametric acoustic measurements, the quadratic nonlinearity coefficient (beta) was determined. beta was correlated with the cation exchange capacity (CEC), an indicator of shear strength. The results indicate that increased acoustic nonlinearity correlates with increased CEC. From this work, laboratory measurements indicate that this correlation may be used evaluate geotechnical properties of cohesive sediments and may provide a means to predict sediment weakness in subaqueous environments.

Mikropaleontologický výzkum svrchně pleistocenních sedimentů v pískovně u pístů

Czech Academy of Sciences Publication Activity Database

Hradecká, L.; Břízová, E.; Havlíček, P.; Svobodová, Marcela

2008-01-01

Roč. 2007, - (2008), s. 120-123 ISSN 0514-8057 Institutional research plan: CEZ:AV0Z30130516 Keywords : Quaternary sediments * lithology * palynology * Upper Cretaceous * foraminiferal and palynomorph redepositions Subject RIV: DB - Geology ; Mineralogy http://www.geology.cz/zpravy/obsah/2007/2007-33.pdf

Mineralogy of Nicobar Fan turbidites (IODP Leg 362): Himalayan provenance and diagenetic control.

Science.gov (United States)

Limonta, M.; Garzanti, E.; Ando, S.; Carter, A.; Milliken, K. L.; Pickering, K. T.

2017-12-01

In this study we use quantitative petrographic and heavy-mineral data on silt-sized and sand-sized sediments from the Nicobar Fan turbiditic depositional system to unravel their provenance and discriminate between pre-depositional and post-depositional processes controlling sediment mineralogy. Eighteen samples from the two drill sites U1480 e U1481, collected down to a depth of 1400 m during International Ocean Discovery Expedition 362, were selected for analysis. A complete section of the sedimentary section overlying oceanic basaltic basement was recovered at the U1480 drill site, whereas the U1481 drill site, located 35 km to the southeast, focused on the deeper interval of the sedimentary section overlying oceanic basement. Here we illustrate the compositional trends observed throughout the recovered succession, and compare heavy-mineral suites characterizing sediments drilled at the two U1480 and U1481 sites to check for potential differences in sediment provenance over a relatively short distance in trench settings. Diagenetic control with increasing burial depth was also specifically investigated. In Pleistocene sediments at depths of a few tens of meters only, rich heavy-mineral assemblages include mainly hornblende, epidote, and garnet, associated with apatite, clinopyroxene, tourmaline, sillimanite, kyanite, zircon, titanite, and rare staurolite and rutile, testifying to long-distance provenance from the Himalayan range via the Ganga-Brahmaputra fluvio-deltaic-turbiditic system. Heavy-mineral concentration shows a progressive decrease with burial depth, pointing to selective diagenetic dissolution of less durable detrital minerals. Clinopyroxene becomes rare below 400 m depth and was not recorded below 500 m depth, where amphibole decreases notably in relative abundance. More durable heavy minerals, including zircon, tourmaline, apatite, garnet and epidote, consequently tend to be relatively enriched with increasing age and burial depth. Petrographic and

An unpublished text of Jovellanos about mineralogy Notas inéditas de Jovellanos sobre mineralogía

Directory of Open Access Journals (Sweden)

Jorge ORDAZ GARGALLO

2012-01-01

Full Text Available An unpublished manuscript of Gaspar Melchor de Jovellanos about the history of mineralogy, written during his captivity in Bellver Castle (Palma de Mallorca is presented and analyzed. In this writing the importance of the chemical knowledge as a source of other branches of science and its applications in different fields of agriculture, mining and industry is considered. The author made a historical synthesis reviewing the men of science that contributed in a great extent to the advance of the chemistry and mineralogy. The text clearly supports the new contributions of Lavoisier and other supporters of experimentation as a scientific method, which agrees with Jovellanos’ ideas about the development of the «useful» sciences for the progress of the countries.Se presenta y analiza un manuscrito inédito de Gaspar Melchor de Jovellanos sobre la historia de la mineralogía, que redactó durante su cautiverio en el Castillo de Bellver (Palma de Mallorca. En el escrito considera de gran importancia los conocimientos químicos como fuente de otras ramas del saber científico y sus aplicaciones en distintos ámbitos de la agricultura, minería e industria. El autor hace una síntesis histórica repasando los hombres de ciencia que en mayor medida contribuyeron al avance de la química y la mineralogía. El texto apoya claramente las nuevas aportaciones de Lavoisier y otros químicos partidarios de la experimentación como método científico, y es acorde con las ideas de Jovellanos acerca del cultivo de las ciencias «útiles» para el progreso de los pueblos.

Effect of salinity on metal mobility in Sečovlje salina sediment (northern Adriatic, Slovenia)

Science.gov (United States)

Kovač, N.; Ramšak, T.; Glavaš, N.; Dolenec, M.; Rogan Šmuc, N.

2016-12-01

Saline sediment (saline healing mud or "fango") from the Sečovlje Salina (northern Adriatic, Slovenia) is traditionally used in the coastal health resorts as a virgin material for medical treatment, wellness and relax purposes. Therapeutic qualities of the healing mud depend on its mineralogical composition and physical, mineralogical, geochemical and biological properties. Their microbial and potentially toxic elements contamination are the most important features affecting user safety. However, the degree of metal toxicity (and its regulation) for natural healing mud is still under discussion. Therefore, the influence of the overlying water salinity on the mobility of heavy metals (and some other geochemical characteristic) was studied for saline sediments of the Sečovlje Salina. Experiments takes place in tanks under defined conditions i.e. at day (21 °C): night (16 °C) cycle for three months. Sediment was covered with water of different salinities (36, 155, 323 g NaCl L-1 and distillate water) and mixed/stirred every week during the experimental period. At the same time, the evaporated water was replaced with distilled water. The mud samples were analyzed, at the beginning and at the end of experiment, for mineral (XRD), elemental composition (ICP-MS) and organic content (% TOC, % TN). Geochemical analysis of the aqueous phase (content of cations and anions) have also been carried out in an accredited Canadian laboratory Actlabs (Activation Laboratories, Canada). Salinity and maturation of sediment does not significantly affect its mineral composition. The samples taken at the end of the experiment have higher percent of water but lower organic carbon concentration. Concentrations of investigated elements are comparable to that in surface sediments from Central Adriatic Sea. In the water phase, concentrations of most elements (As, Ba, Cu, Mo, Mn, Ni, Sr, Sb) rise from the beginning to the end of the experiment, whereas the metal (potentially toxic elements

Clay mineralogical and Sr, Nd isotopic investigations in two deep-sea sediment cores from Northeast Indian Ocean

International Nuclear Information System (INIS)

Anil Babu, G.; Masood Ahmad, S.; Padmakumari, V.M.; Dayal, A.M.

2004-01-01

Sr and Nd isotopic studies in terrigenous component of the ocean sediments provide useful information about weathering patterns near source rock and climatic conditions existed on the continents. Variations in 87 Sr/ 86 Sr and 143 Nd/ 144 Nd isotopic ratios in clastic sediments depend on the source from the continents, volcanic input and circulation changes. The composition of clay minerals mainly depends on climate, geology and topography of the surrounding region. Chlorite and Illite are formed under physical weathering in arid cold climate and kaolinite and smectite are the characteristic products of chemical weathering in humid wet climatic conditions. Therefore, the variations in clay mineral composition in deep-sea sediments can be interpreted in terms of changes in the climatic conditions prevailed in the continental source areas

Characterization and evolution of the sediments of a Mediterranean coastal lagoon located next to a former mining area.

Science.gov (United States)

García, Gregorio; Muñoz-Vera, Ana

2015-11-15

Coastal lagoons are ecosystems that are relatively enclosed water bodies under the influence of both the terrestrial and the marine environment, being vulnerable to human impacts. Human activities, such as mining extraction, are significant anthropogenic coastal stressors that can negatively affect ecosystems and communities. In light of the above, the objective of this research is to examine the influence of metal mining activities on the composition of sediments of a Mediterranean coastal lagoon, named Mar Menor. This paper presents a comprehensive characterization for grain size, mineralogy, geochemistry and organic matter of sediments of this coastal lagoon, investigating their variation along space and time. Sedimentation dynamics are ruling clearly the grain size predominant in each area of the Mar Menor coastal lagoon, determining the existence of entrainment, transport and sedimentation areas. For minerals, elements and organic matter, sedimentation dynamics are also determining their distribution. Copyright © 2015 Elsevier Ltd. All rights reserved.

Disposal in sea-bed geological formations. Properties of ocean sediments in relation to the disposal of radioactive waste

International Nuclear Information System (INIS)

Schultheiss, P.J.; Thomson, J.

1984-01-01

Work on the permeability and consolidation characteristics of sediment cores from the north-east Atlantic has shown that each sediment type studied has a unique void ratio/permeability relationship and that the permeability decreases with effective stress more rapidly for fine than for coarser grained material. Significant over-consolidation is also present in Pacific red clays from the deep-sea drilling project. Their permeability is less for a given void ratio than that of their Atlantic counterparts. A theoretical analysis is given of the effects on permeability of deep open burrows revealed by improved core handling techniques. Mineralogy and sediment and water chemistry of six cores from the Nares Abyssal Plain have demonstrated the effects of lateral sediment redistribution and have shown only mildly reducing conditions. Pore water studies on a 4 m Kasten core from Great Meteor East show oxygen falling to zero within 30 cm of the sediment surface

Environmental assessment and nano-mineralogical characterization of coal, overburden and sediment from Indian coal mining acid drainage

Directory of Open Access Journals (Sweden)

Madhulika Dutta

2017-11-01

Full Text Available The deterioration of environmental conditions is the major contributory factor to poor health and quality of life that hinders sustainable development in any region. Coal mining is one of the major industries that contribute to the economy of a country but it also impacts the environment. The chemical parameters of the coal, overburden, soil and sediments along with the coal mine drainage (CMD were investigated in order to understand the overall environmental impact from high sulphur coal mining at northeastern coalfield (India. It was found that the total sulphur content of the coal is noticeably high compared to the overburden (OB and soil. The volatile matter of the coal is sufficiently high against the high ash content of the soil and overburden. The water samples have a High Electrical Conductivity (EC and high Total Dissolve Solid (TDS. Lower values of pH, indicate the dissolution of minerals present in the coal as well as other minerals in the mine rejects/overburden. The chemical and nano-mineralogical composition of coal, soil and overburden samples was studied using a High Resolution-Transmission Electron Microscopy (HR-TEM, Energy Dispersive Spectroscopy (EDS, Selected-Area Diffraction (SAED, Field Emission-Scanning Electron Microscopy (FE-SEM/EDS, X-ray diffraction (XRD, Fourier Transform Infrared Spectroscopy (FTIR, Raman and Ion-Chromatographic analysis, and Mössbauer spectroscopy. From different geochemical analysis it has been found that the mine water sample from Ledo colliery has the lowest pH value of 3.30, Tirap colliery samples have the highest electrical conductivity value of 5.40 ms cm−1. Both Ledo and Tirap coals have total sulphur contents within the range 3–3.50%. The coal mine water from Tirap colliery (TW-15B has high values of Mg2+ (450 ppm, and Br− (227.17 ppm. XRD analysis revealed the presence of minerals including quartz and hematite in the coals. Mineral analysis of coal mine overburden (OB indicates

Overview of the evolution of clay mineralogy in the Gulf of Mexico: implications for regional climate and drainage history of the Mississippi and Brazos-Trinity Rivers

Science.gov (United States)

Adatte, T.; John, C. M.; Flemings, P. B.; Behrmann, J.

2005-12-01

In this paper we present the overview and preliminary results of the analysis of clay minerals in two mini basins drilled during IODP Expedition 308. The goal of our project is to explore the vertical and temporal trends in clay mineralogy in the Ursa Basin and the Brazos-Trinity basin #4. The Brazos-Trinity basin was the sink for sands and clays carried by the Brazos and Trinity Rivers, while the Ursa basin was the sink for sediments carried by the Mississippi river. Reconstructing clay minerals (phyllosilicates turbidity current deposition (controlled mainly by sea-level changes and thus glacio-eustasy). Finally, a major focusing point of Expedition 308 was sediment physical properties in an overpressured basin. Because each clay mineral specie has a specific average grain sizes, physical properties and cation exchange capacity, the clay mineral composition of the sediment investigated here (dominated by clay-sized particles) may partly control how these sediments react to changes in pressure and temperature. Thus, clay mineral data could contribute to our understanding of the physical properties of the sediments in overpressured basins, and collaborations with geotechnical scientist are planned.

Thermal conductivity of sedimentary rocks - selected methodological, mineralogical and textural studies

Energy Technology Data Exchange (ETDEWEB)

Midttoemme, Kirsti

1997-12-31

The thermal conductivity of sedimentary rocks is an important parameter in basin modelling as the main parameter controlling the temperature within a sedimentary basin. This thesis presents measured thermal conductivities, mainly on clay- and mudstone. The measured values are compared with values obtained by using thermal conductivity models. Some new thermal conductivity models are developed based on the measured values. The values obtained are less than most previously published values. In a study of unconsolidated sediments a constant deviation was found between thermal conductivities measured with a needle probe and a divided bas apparatus. Accepted thermal conductivity models based on the geometric mean model fail to predict the thermal conductivity of clay- and mudstone. Despite this, models based on the geometric mean model, where the effect of porosity is taken account of by the geometric mean equation, seem to be the best. Existing models underestimate the textural influence on the thermal conductivity of clay- and mudstone. The grain size was found to influence the thermal conductivity of artificial quartz samples. The clay mineral content seems to be a point of uncertainty in both measuring and modelling thermal conductivity. A good universal thermal conductivity model must include many mineralogical and textural factors. Since this is difficult, different models restricted to specific sediment types and textures are suggested to be the best solution to obtain realistic estimates applicable in basin modelling. 243 refs., 64 figs., 31 tabs.

Origin of the Sinai-Negev erg, Egypt and Israel: mineralogical and geochemical evidence for the importance of the Nile and sea level history

Science.gov (United States)

Muhs, Daniel R.; Roskin, Joel; Tsoar, Haim; Skipp, Gary; Budahn, James R.; Sneh, Amihai; Porat, Naomi; Stanley, Jean-Daniel; Katra, Itzhak; Blumberg, Dan G.

2013-01-01

The Sinai–Negev erg occupies an area of 13,000 km2 in the deserts of Egypt and Israel. Aeolian sand of this erg has been proposed to be derived from the Nile Delta, but empirical data supporting this view are lacking. An alternative source sediment is sand from the large Wadi El Arish drainage system in central and northern Sinai. Mineralogy of the Negev and Sinai dunes shows that they are high in quartz, with much smaller amounts of K-feldspar and plagioclase. Both Nile Delta sands and Sinai wadi sands, upstream of the dunes, also have high amounts of quartz relative to K-feldspar and plagioclase. However, Sinai wadi sands have abundant calcite, whereas Nile Delta sands have little or no calcite. Overall, the mineralogical data suggest that the dunes are derived dominantly from the Nile Delta, with Sinai wadi sands being a minor contributor. Geochemical data that proxy for both the light mineral fraction (SiO2/10–Al2O3 + Na2O + K2O–CaO) and heavy mineral fraction (Fe2O3–MgO–TiO2) also indicate a dominant Nile Delta source for the dunes. Thus, we report here the first empirical evidence that the Sinai–Negev dunes are derived dominantly from the Nile Delta. Linkage of the Sinai–Negev erg to the Nile Delta as a source is consistent with the distribution of OSL ages of Negev dunes in recent studies. Stratigraphic studies show that during the Last Glacial period, when dune incursions in the Sinai–Negev erg began, what is now the Nile Delta area was characterized by a broad, sandy, minimally vegetated plain, with seasonally dry anastomosing channels. Such conditions were ideal for providing a ready source of sand for aeolian transport under what were probably much stronger glacial-age winds. With the post-glacial rise in sea level, the Nile River began to aggrade. Post-glacial sedimentation has been dominated by fine-grained silts and clays. Thus, sea level, along with favorable climatic conditions, emerges as a major influence on the timing of dune

Current status of application of Moessbauer effect in geology and mineralogy

International Nuclear Information System (INIS)

Xu Binfu

1995-01-01

The paper briefly introduces the current status of the application of Moessbauer effect in geology and mineralogy. It shows that geology and mineralogy are very active fields in the application of Moessbauer effect

Morava River flood plain sediments deposited during the last millennium: Climatic and anthropogenic record

Czech Academy of Sciences Publication Activity Database

Kadlec, Jaroslav; Grygar, Tomáš; Světlík, Ivo; Ettler, V.; Mihaljevič, M.; Diehl, J.; Beske-Diehl, S.

2008-01-01

Roč. 34, 4/6 (2008), s. 1338314-1338314 ISSN 0161-6951. [International Geological Congress /33./. 06.08.2008-14.08.2008, Oslo ] R&D Projects: GA AV ČR IAA300130505; GA AV ČR IAA3013201; GA AV ČR IAAX00130801 Institutional research plan: CEZ:AV0Z30130516; CEZ:AV0Z40320502; CEZ:AV0Z10480505 Keywords : Morava River * flood * plain sediments * magnetic minerals Subject RIV: DB - Geology ; Mineralogy

Biostimulation of Iron Reduction and Uranium Immobilization: Microbial and Mineralogical Controls

International Nuclear Information System (INIS)

Joel E. Kostka; Lainie Petrie; Nadia North; David L. Balkwill; Joseph W. Stucki; Lee Kerkhof

2004-01-01

The overall objective of our project is to understand the microbial and geochemical mechanisms controlling the reduction and immobilization of U(VI) during biostimulation in subsurface sediments of the Field Research Center (FRC) which are cocontaminated with uranium and nitrate. The focus will be on activity of microbial populations (metal- and nitrate-reducing bacteria) and iron minerals which are likely to make strong contributions to the fate of uranium during in situ bioremediation. The project will: (1) quantify the relationships between active members of the microbial communities, iron mineralogy, and nitrogen transformations in the field and in laboratory incubations under a variety of biostimulation conditions, (2) purify and physiologically characterize new model metal-reducing bacteria isolated from moderately acidophilic FRC subsurface sediments, and (3) elucidate the biotic and abiotic mechanisms by which FRC aluminosilicate clay minerals are reduced and dissolved under environmental conditions resembling those during biostimulation. Active microbial communities will be assessed using quantitative molecular techniques along with geochemical measurements to determine the different terminal-electron-accepting pathways. Iron minerals will be characterized using a suite of physical, spectroscopic, and wet chemical methods. Monitoring the activity and composition of the denitrifier community in parallel with denitrification intermediates during nitrate removal will provide a better understanding of the indirect effects of nitrate reduction on uranium speciation. Through quantification of the activity of specific microbial populations and an in-depth characterization of Fe minerals likely to catalyze U sorption/precipitation, we will provide important inputs for reaction-based biogeochemical models which will provide the basis for development of in situ U bioremediation strategies. In collaboration with Jack Istok and Lee Krumholz, we have begun to study the

Interactions of acidic solutions with sediments: a case study

International Nuclear Information System (INIS)

Peterson, S.R.; Serne, R.J.; Felmy, A.R.; Erikson, R.L.; Krupka, K.M.; Gee, G.W.

1984-01-01

A methodology is presented for investigating the chemical interactions of acidic solutions with sediments. The MINTEQ geochemical computer code was used to predict solid-phase reactions that might occur when acidic solutions contact neutral sediments which, in turn, may control the concentrations of certain dissolved components. Results of X-ray diffraction analysis of laboratory samples of sediments that have been contacted with acidic uranium mill tailings solutions suggest gypsum and jarosite precipitated. These same mineralogical changes were identified in sediment samples collected from a drained uranium mill evaporation pond (Lucky Mc mine in Wyoming) with a 10-year history of acid attack. Geochemical modeling predicted that these same phases and several amorphous solids not identifiable by X-ray diffraction should have precipitated in the contacted sediments. An equilibrium conceptual model consisting of an assemblage of minerals and amorphous solid phases was then developed to represent a sediment column through which uranium mill tailings solutions were percolated. The MINTEQ code was used to predict effluent solution concentrations resulting from the reactions of the tailings solution with the assemblage of solid phases in the conceptual model. The conceptual model successfully predicted the concentrations of several of the macro-constituents (e.g., Ca, SO 4 , Al, Fe, and Mn), but was not successful in modeling the concentrations of trace elements. The lack of success in predicting the observed trace metal concentrations suggests that other mechanisms, such as adsorption, must be included in future models. The geochemical modeling methodology coupled with the laboratory and field studies should be applicable to a variety of waste disposal problems

Sedimentology, Mineralogy, Morphology, and Characterization of Purple Non-Sulfur Bacteria Communities from Modern Hypersaline Microbial Mats in Puerto Rico and the Virgin Islands

Science.gov (United States)

Rodriguez Colon, B. J.; Rivera-Lopez, E. O.; Ramirez-Martinez, W. R.; Rios-Velazquez, C.; Perez-Valentin, K. A.

2017-12-01

Microbial mats are organosedimentary structures which house complex guilds of microbial communities, held together by a gelatinous exopolymeric substance (EPS). This biofilm contributes to the formation of laminations by binding and trapping sediments, as well as in-situ organomineralization. Microbial mats commonly thrive in extreme habitats, such as the hypersaline environments, which have been studied throughout several coastal regions in the Caribbean. This project aims to study the morphology, sedimentology, and mineralogy of five different modern hypersaline microbial mats from Puerto Rico and Anegada that have not yet been studied, to assess their differences/similarities. At the same time, we intent to isolate and characterize purple non-sulfur bacteria (PNSB), which is an anoxyphototrophic microorganism that contributes to the pink pigmentation observed in the second layer of a typical microbial mat. Different layers within each mat were separated, dissected and dissolved to remove all organic material. The resulting sediment was then analyzed mineralogically using X-ray diffraction, and used to make petrographic thin sections. To isolate PNSB candidates, serial dilutions followed by filtration were performed to extracted sections from the pink layer of each mat. The samples were planted in Petri dishes with marine media and placed in Anaerobic Jars. Colonies Descriptions, Gram stain and molecular analysis using 16S rDNA gene was performed. Preliminary results show a diversity of mat morphologies throughout the ponds, similar to what has been observed in other hypersaline ponds and marshes in the Caribbean. Sedimentary analysis shows that the mats from Puerto Rico have similar allochthonous material (e.g. Halimeda sp. fragments). Microcodium fabrics, conoform structures, and hemispheroidal morphologies were observed as well. In Anegada, lithified microbialites were observed in the Red Pond location. Mineralogically, all samples were similar except for the

Mineralogy of auriferous deposits of the quaternary deposits in the San Luis Province, Argentina

International Nuclear Information System (INIS)

Karlsson, A.; Ayala, R. . E mail: Karlsson@arnet.com.ar

2004-01-01

The objective of this work is to study the mineralogy of the sands and clays of the quaternary deposits in the San Luis Mountain, Argentina. A series of algorithms applied to the sand fraction has permitted to determine sedimentary discontinuities. The two micron fraction of the sediments has been studied by a quantification technique based on X-ray diffraction by means of oriented preparations and run with copper tube. These quaternary silts have received fluvial lateral contributions. The high cristalinidad of non expandibles and fireclay clay show the antique of the silts. The polygenic processes have generated a great variety of clay mineral species like a large quantities of illite and in lesser extend kaolinite and smectites. The illite was probably generated by diagenetic changes. The high cristalinidad of non expandibles and fireclay clay show the antique of the silts [es

On the rocks and buried : comparative assessment of the mineralogical, geochemical and archaeological evidence at Walkunder Arch, Chillagoe, north-eastern Australia

International Nuclear Information System (INIS)

Mardaga-Campbell, M.; Watchman, A.; Campbell, J.B.

2001-01-01

The mineralogical and geochemical changes in finely laminated rock surface crusts as well as evidence of Aboriginal painting indicate changes in environment and human use of Walkunder Arch rockshelter near Chillagoe. Similar changes within the floor deposits of organic remains and inorganic sediments together with signs of extensive living-floors define episodes of human occupation. Comparisons of the two data sets reveal a broadly consistent pattern, supporing evidence for intermittent occupation and use of the rockshelter over the last 16,000 years from the floors and the last 28,000 years from the rock surface accretions. (author). 22 refs., 5 figs., 2 tabs

Types of soft-sediment deformation structures in a lacustrine Ploužnice member (Stephanian, Gzhelian, Pennsylvanian, Bohemian Massif), their timing, and possible trigger mechanism

Czech Academy of Sciences Publication Activity Database

Stárková, M.; Martínek, K.; Mikuláš, Radek; Rosenau, N.

2015-01-01

Roč. 104, č. 5 (2015), s. 1277-1298 ISSN 1437-3254 Institutional support: RVO:67985831 Keywords : soft-sediment deformation structures * bioturbation * early diagenetic carbonate * lacustrine facies * Bohemian Massif * Stephanian C * Krkonoše Piedmont Basin Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.133, year: 2015

Mineralogical characterization of West Chestnut Ridge soils

International Nuclear Information System (INIS)

Lee, S.Y.; Kopp, O.C.; Lietzke, D.A.

1984-12-01

The morphological, physicochemical, and mineralogical properties of the soils and residua from the proposed site of the Central Waste Disposal Facility were characterized. The proposed site is underlain by cherty dolostones, limestones, and shales of the Knox Group covered by a thick residuum. Three diagnostic horizons from four soil profiles and six samples from residuum cores were selected for mineralogical analysis. The coarse fractions (gravel and sand) of the samples included different types of chert, iron-manganese oxide nodules, and quartz. The samples were high in clay content (except those from the A and E horizons) and low in pH and base saturation. The clay fractions were composed of varying amounts of kaolinite, mica, vermiculite, aluminum hydroxy-interlayered vermiculite, amorphous iron and aluminum oxides, gibbsite, and quartz. Aluminum hydroxy-interlayered vermiculite is the major component in surface horizons, but kaolinite becomes dominant in subsurface horizons of the soils. Degradation of kaolinite and formation of aluminum hydroxy-interlayered vermiculite and iron and aluminum oxides are pronounced chemical weathering processes in the surface soils. The aluminum hydroxy interlayering of vermiculite reduces cation exchange and selective sorption capacities of soils. In the residua, micaceous minerals free of aluminum hydroxy interlayering, kaolinite, and amorphous iron and aluminum oxides are major components in the clay fraction. The sorption ratios of 137 Cs, 90 Sr, 60 Co, and the uranium isotopes expected to be in the radioactive wastes should be very high for the clays having such mineralogical composition. The low acid-buffering capacity (base saturation) of the residua suggest that the fragile chemical and mineralogical equilibria can be easily broken if an extreme chemical condition is imposed on the residua

Sediment-hosted gold deposits of the world: database and grade and tonnage models

Science.gov (United States)

Berger, Vladimir I.; Mosier, Dan L.; Bliss, James D.; Moring, Barry C.

2014-01-01

All sediment-hosted gold deposits (as a single population) share one characteristic—they all have disseminated micron-sized invisible gold in sedimentary rocks. Sediment-hosted gold deposits are recognized in the Great Basin province of the western United States and in China along with a few recognized deposits in Indonesia, Iran, and Malaysia. Three new grade and tonnage models for sediment-hosted gold deposits are presented in this paper: (1) a general sediment-hosted gold type model, (2) a Carlin subtype model, and (3) a Chinese subtype model. These models are based on grade and tonnage data from a database compilation of 118 sediment-hosted gold deposits including a total of 123 global deposits. The new general grade and tonnage model for sediment-hosted gold deposits (n=118) has a median tonnage of 5.7 million metric tonnes (Mt) and a gold grade of 2.9 grams per tonne (g/t). This new grade and tonnage model is remarkable in that the estimated parameters of the resulting grade and tonnage distributions are comparable to the previous model of Mosier and others (1992). A notable change is in the reporting of silver in more than 10 percent of deposits; moreover, the previous model had not considered deposits in China. From this general grade and tonnage model, two significantly different subtypes of sediment-hosted gold deposits are differentiated: Carlin and Chinese. The Carlin subtype includes 88 deposits in the western United States, Indonesia, Iran, and Malaysia, with median tonnage and grade of 7.1 Mt and 2.0 g/t Au, respectively. The silver grade is 0.78 g/t Ag for the 10th percentile of deposits. The Chinese subtype represents 30 deposits in China, with a median tonnage of 3.9 Mt and medium grade of 4.6 g/t Au. Important differences are recognized in the mineralogy and alteration of the two sediment-hosted gold subtypes such as: increased sulfide minerals in the Chinese subtype and decalcification alteration dominant in the Carlin type. We therefore

Speciation of Fe(II) and Fe(III) in Contaminated Aquifer Sediments Using Chemical Extraction Techniques

DEFF Research Database (Denmark)

Heron, Gorm; Crouzet, Catherine.; Bourg, Alain C. M.

1994-01-01

The iron mineralogy of aquifer sediments was described by chemical extraction techniques. Single-step extractions including 1 M CaC12, NaAc, oxalate, dithionite, Ti(II1)- EDTA, 0.5 M HC1,5 M HC1, hot 6 M HC1, and a sequential extraction by HI and CrIIHC1 were tested on standard iron minerals...... species are distinguished as AVS (acid volatile sulfide, hot 6 M HC1 extraction) and pyrite (sequential HI and CrIIHC1 extraction). By including a cold 5 M HC1 extraction, the total distribution of the major reactive Fe(I1) and Fe(II1) fractions in aquifer sediments can be assessed....

Feasibility of high level radioactive waste disposal in deep sea sediments

International Nuclear Information System (INIS)

Buckley, D.E.

1987-01-01

For the past ten years, an international program has been conducted to investigate the concept feasibility for disposing of spent nuclear fuel waste in deep ocean sediments. These studies by the Seabed Working Group were coordinated by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. Penetrators have been considered as the primary method of waste emplacement. This required emphasis on studies of the nature of the plastic sediments which would form the primary barrier to the release of radionuclides into the biosphere. Site qualification guidelines, included criteria for tectonic and sedimentary stability over periods of at least 10 5 years. Using these guidelines two potential areas were identified: one in the Madeira Abyssal Plain; and one in the Southern Nares Abyssal Plain, both in the North Atlantic. The sediment barrier properties are quite different in terms of dominant mineralogy (carbonates in MAP, and silicous clays in SNAP). The MAP is dominated by thick wide-spread turbidites, but SNAP is dominated by thin discontinuous turbidites

Moessbauer mineralogy on the Moon: The lunar regolith

International Nuclear Information System (INIS)

Morris, Richard V.; Klingelhoefer, Goestar; Korotev, Randy L.; Shelfer, Tad D.

1998-01-01

A first-order requirement for spacecraft missions that land on solid planetary objects is instrumentation for mineralogical analyses. For purposes of providing diagnostic information about naturally-occurring materials, the element iron is particularly important because it is abundant and multivalent. Knowledge of the oxidation state of iron and its distribution among iron-bearing mineralogies tightly constrains the types of materials present and provides information about formation and modification (weathering) processes. Because Moessbauer spectroscopy is sensitive to both the valence of iron and its local chemical environment, the technique is unique in providing information about both the relative abundance of iron-bearing phases and oxidation state of the iron. The Moessbauer mineralogy of lunar regolith samples (primarily soils from the Apollo 16 and 17 missions to the Moon) were measured in the laboratory to demonstrate the strength of the technique for in-situ mineralogical exploration of the Moon. The regolith samples were modeled as mixtures of five iron-bearing phases: olivine, pyroxene, glass, ilmenite, and metal. Based on differences in relative proportions of iron associated with these phases, volcanic-ash regolith can be distinguished from impact-derived regolith, impact-derived soils of different geologic affinity (e.g., highlands and maria) can be distinguished on the basis of their constituent minerals, and soil maturity can be estimated. The total resonant absorption area of the Moessbauer spectrum can be used to estimate total FeO concentrations

Environmental complexity of a port: Evidence from circulation of the water masses, and composition and contamination of bottom sediments.

Science.gov (United States)

Cutroneo, L; Carbone, C; Consani, S; Vagge, G; Canepa, G; Capello, M

2017-06-15

Ports are complex environments due to their complicated geometry (quays, channels, and piers), the presence of human activities (vessel traffic, shipyards, industries, and discharges), and natural factors (stream and torrent inputs, sea action, and currents). Taking these factors into consideration, we have examined the marine environment of a port from the point of view of the circulation of the water masses, hydrological characteristics, distribution of the sediment grain-size, mineralogical characteristics, and metal concentrations of the bottom sediments. Our results show that, in the case of the Port of Genoa (north-western Italy), the impact of human activities (such as a coal power-plant, oil depots, shipyards, dredging of the bottom sediments, etc.), natural processes (such as currents, fresh water and sediment inputs from the torrents), and the morphology of the basin, are important factors in the sediment, water, and metal distributions that have given rise to a complex environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mineralogical In-situ Investigation of Acid-Sulfate Samples from the Rio Tinto River, Spain, with a Portable XRD/XRF Instrument

Science.gov (United States)

Sarrazin, P.; Ming, D. W.; Morris, R. V.; Fernandez-Remolar, D.; Amils, R.; Arvidson, R. E.; Blake, D.; Bish, D. L.

2007-01-01

A field campaign was organized in September 2006 by Centro de Astobiologica (Spain) and Washington University (St Louis, USA) for the geological study of the Rio Tinto river bed sediments using a suite of in-situ instruments comprising an ASD reflectance spectrometer, an emission spectrometer, panoramic and close-up color imaging cameras, a life detection system and NASA's CheMin 4 XRD/XRF prototype. The primary objectives of the field campaign were to study the geology of the site and test the potential of the instrument suite in an astrobiological investigation context for future Mars surface robotic missions. The results of the overall campaign will be presented elsewhere. This paper focuses on the results of the XRD/XRF instrument deployment. The specific objectives of the CheMin 4 prototype in Rio Tinto were to 1) characterize the mineralogy of efflorescent salts in their native environments; 2) analyze the mineralogy of salts and oxides from the modern environment to terraces formed earlier as part of the Rio Tinto evaporative system; and 3) map the transition from hematite-dominated terraces to the mixed goethite/salt-bearing terraces where biosignatures are best preserved.

Fossils in Late Cretaceous to early Palaeocene flint nodules embedded in pleistocene glaciofluvial sediments near Fukov (Děčín District, Northern Bohemia)

Czech Academy of Sciences Publication Activity Database

Pokorný, R.; Kaše, J.; Kvaček, J.; Zágoršek, K.; Kočí, T.; Žítt, Jiří

2012-01-01

Roč. 68, 3/4 (2012), s. 119-131 ISSN 0036-5343 Institutional support: RVO:67985831 Keywords : Erratic boulders * Flint * Glaciofluvial sediments * Late Cretaceous * Northern Bohemia * Palaeocene * Pleistocene glaciation * Taphocoenosis Subject RIV: DB - Geology ; Mineralogy http://www.nm.cz/publikace/archiv.php?id=4&rok=68&kcislu=3-4&f_=Zobrazit

Sediment-peridotite interactions in a thermal gradient: mineralogic and geochemical effects and the "sedimentary signature" of arc magmas

Science.gov (United States)

Woodland, Alan; Girnis, Andrei; Bulatov, Vadim; Brey, Gerhard; Höfer, Heidi; Gerdes, Axel

2017-04-01

Strong thermal and chemical gradients are characteristic of the slab-mantle interface in subduction zones where relatively cold sediments become juxtaposed with hotter peridotite of the mantle wedge. The formation of arc magmas is directly related to mass transfer processes under these conditions. We have undertaken a series of experiments to simulate interactions and mass transfer at the slab-mantle interface. In addition to having juxtaposed sediment and peridotite layers, the experiments were performed under different thermal gradients. The sediment had a composition similar to GLOSS (1) and also served as the source of H2O, CO2 and a large selection of trace elements. The peridotite was a depleted garnet harzburgite formed from a mixture of natural hand-picked olivine, opx and garnet. Graphite was added to this mixture to establish a redox gradient between the two layers. Experiments were performed at 7.5-10 GPa to simulate the processes during deep subduction. The thermal gradient was achieved by displacing the sample capsule (Re-lined Pt) from the center of the pressure cell. The gradient was monitored with separate thermocouples at each end of the capsule and by subsequent opx-garnet thermometry across the sample. Maximum temperatures varied from 1400˚ -900˚ C and gradients ranged from 200˚ -800˚ C. Thus, in some experiments melting occurred in the sediment layer and in others this layer remained subsolidus, only devolatilizing. Major and trace elements were transported both in the direction of melt percolation to the hot zone, as well as down temperature. This leads to the development of zones with discrete phase assemblages. Olivine in the peridotite layer becomes converted to orthopyroxene, which is due to Si addition, but also migration of Mg and Fe towards the sediment. In the coldest part of a sample, the sediment is converted into an eclogitic cpx + garnet assemblage. A thin zone depleted in almost all trace elements is formed in peridotite

Velocities of Subducted Sediments and Continents

Science.gov (United States)

Hacker, B. R.; van Keken, P. E.; Abers, G. A.; Seward, G.

2009-12-01

The growing capability to measure seismic velocities in subduction zones has led to unusual observations. For example, although most minerals have VP/ VS ratios around 1.77, ratios 1.8 have been observed. Here we explore the velocities of subducted sediments and continental crust from trench to sub-arc depths using two methods. (1) Mineralogy was calculated as a function of P & T for a range of subducted sediment compositions using Perple_X, and rock velocities were calculated using the methodology of Hacker & Abers [2004]. Calculated slab-top temperatures have 3 distinct depth intervals with different dP/dT gradients that are determined by how coupling between the slab and mantle wedge is modeled. These three depth intervals show concomitant changes in VP and VS: velocities initially increase with depth, then decrease beyond the modeled decoupling depth where induced flow in the wedge causes rapid heating, and increase again at depth. Subducted limestones, composed chiefly of aragonite, show monotonic increases in VP/ VS from 1.63 to 1.72. Cherts show large jumps in VP/ VS from 1.55-1.65 to 1.75 associated with the quartz-coesite transition. Terrigenous sediments dominated by quartz and mica show similar, but more-subdued, transitions from ~1.67 to 1.78. Pelagic sediments dominated by mica and clinopyroxene show near-monotonic increases in VP/ VS from 1.74 to 1.80. Subducted continental crust that is too dry to transform to high-pressure minerals has a VP/ VS ratio of 1.68-1.70. (2) Velocity anisotropy calculations were made for the same P-T dependent mineralogies using the Christoffel equation and crystal preferred orientations measured via electron-backscatter diffraction for typical constituent phases. The calculated velocity anisotropies range from 5-30%. For quartz-rich rocks, the calculated velocities show a distinct depth dependence because crystal slip systems and CPOs change with temperature. In such rocks, the fast VP direction varies from slab-normal at

Influência da mineralogia da fração argila nas propriedades físicas de latossolos da região sudeste do Brasil

Directory of Open Access Journals (Sweden)

M. M. Ferreira

1999-09-01

Full Text Available Visando avaliar a influência da mineralogia da fração argila nas propriedades físicas de Latossolos do sudeste brasileiro, selecionaram-se sete Latossolos, representativos deste grupamento, ocorrentes nos estados de Minas Gerais e Espírito Santo, apresentando distintas feições morfológicas associadas à estrutura do solo. A amostragem dos solos foi efetuada no horizonte B latossólico, sendo retiradas amostras deformadas e indeformadas. No laboratório, foram efetuadas análises químicas, físicas e mineralógicas. Estudos de regressão e correlação levados a efeito com os resultados das diversas caracterizações mostraram que as propriedades físicas associadas à estrutura foram marcadamente influenciadas pela composição mineralógica da fração argila dos Latossolos. O efeito do Al sobre as propriedades físicas estudadas foi mais pronunciado do que o do Fe. Latossolos cauliníticos apresentaram maior densidade do solo, menor estabilidade de agregados em água, menor macroporosidade e menor permeabilidade quando comparados com Latossolos gibbsíticos. A permeabilidade dos Latossolos estudados aumentou com o teor de argila.

CCD-Based XRD/XRF for Determining Environmental Mineralogy on Mars

Science.gov (United States)

Vaniman, D. T.; Bish, D. L.; Blake, D. F.; Chipera, S. J.

2000-01-01

Health effects from Martian dusts will be a concern for any manned Mars missions. Nuisance dusts plagued the Apollo astronauts, but dusts of more hazardous mineralogy, in habitats occupied by Mars astronauts weakened by a long-duration mission, may be more than a nuisance. Chemical hazards in Martian regolith attributable to S, Cl, Br, Cd, and Pb are known or strongly suspected to be present, but terrestrial studies of the health effects of dusts indicate that accurate determination of mineralogy is a critical factor in evaluating inhalation hazards. Mineral inhalation hazards such as the Group-I carcinogenic zeolite erionite, which is demonstrated to cause mesothelioma, cannot be identified by chemical analysis alone. Studies of palagonite analogs raise the possibility that erionite may occur on Mars. In addition to health effects concerns, environmental mineralogy has significant importance in resource extraction, groundwater use, and sustained agriculture. The high sulfur and chlorine content of Martian regolith will affect all of these uses, but the nature of mineralogic reservoirs for S and Cl will determine their uptake and concentration in extracted groundwater and in agricultural applications of regolith. Wet chemistry experiments planned for the Mars Environmental Compatibility Assessment (MECA) will define some of the consequences of water/soil interaction, but an understanding of the mineralogic basis for water-rock reactions is needed to understand the mechanisms of reaction and to apply the results of a few experiments to larger scales and different conditions.

Mineralogical applications of Mossbauer spectroscopy

International Nuclear Information System (INIS)

Fysh, S.A.; Clark, P.E.

1981-01-01

The Mossbauer effect has been used to study a variety of bauxites, and has been shown to be capable of accurately characterizing the iron mineralogy of bauxite. Such studies may prove to be of great use in determining the suitability of bauxite for aluminium extraction, and in optimizing extraction conditions

Preliminary sediments quality assessment of the Midia Port aquatorium - Black Sea - Romania

Science.gov (United States)

Catianis, I.; Ungureanu, C.; Stanica, A.

2012-04-01

This study shows the present environmental quality of superficial sediments within the aquatorium of an industrial harbor. These results help better understand the correlation between historical pollution and present environmental state of the harbor sediments and related environmental hazards in case of dredging. The study area is the Port of Midia, situated in Romania, western Black Sea coast. The port is located at the boundary between the Danube Delta coast (widest nature protected biosphere reserve in the EU) in the north - and the almost entirely human controlled coast - starting south of the port. Midia Harbor was first built in 1942, expanded during the late 1970`s, and currently operates as an oil and general merchandise terminal. This port receives a double impact of waters: brackish Black Sea waters, as well as Danube fresh waters arriving into the aquatorium through the inshore Danube - Black Sea Canal Lock. To understand the environmental status of the port aquatorium one sampling campaign was performed during August 2011. Samples were collected within the aquatorium and in in the surrounding area outside the harbor. For a better correlation with the particularities related to the transitions in water salinity, the aquatorium was divided into five sectors with specific characteristics: Cargo Terminal Area, Oil Terminal Enclosure Area, Ships Transit Area, Waste Oil Buffer Area and Marine Area. The following analyses were performed on water and sediment samples: physical and chemical characteristics of the waters (dissolved oxygen, temperature, electrical conductivity, total dissolved salts, pH, redox potential, nitrates, nitrites, phosphates, sulphates, heavy metals), bulk sediments (particle size, grain size distribution, mineralogy, organic matter and carbonates content, heavy minerals load, organic compounds) and microbiological and ecotoxicological assays. The grain size analysis reveals the prevalence of very fine-silt and silty-clay fractions, and

Evaluating chemical extraction techniques for the determination of uranium oxidation state in reduced aquifer sediments

Science.gov (United States)

Stoliker, Deborah L.; Campbell, Kate M.; Fox, Patricia M.; Singer, David M.; Kaviani, Nazila; Carey, Minna; Peck, Nicole E.; Barger, John R.; Kent, Douglas B.; Davis, James A.

2013-01-01

Extraction techniques utilizing high pH and (bi)carbonate concentrations were evaluated for their efficacy in determining the oxidation state of uranium (U) in reduced sediments collected from Rifle, CO. Differences in dissolved concentrations between oxic and anoxic extractions have been proposed as a means to quantify the U(VI) and U(IV) content of sediments. An additional step was added to anoxic extractions using a strong anion exchange resin to separate dissolved U(IV) and U(VI). X-ray spectroscopy showed that U(IV) in the sediments was present as polymerized precipitates similar to uraninite and/or less ordered U(IV), referred to as non-uraninite U(IV) species associated with biomass (NUSAB). Extractions of sediment containing both uraninite and NUSAB displayed higher dissolved uranium concentrations under oxic than anoxic conditions while extractions of sediment dominated by NUSAB resulted in identical dissolved U concentrations. Dissolved U(IV) was rapidly oxidized under anoxic conditions in all experiments. Uraninite reacted minimally under anoxic conditions but thermodynamic calculations show that its propensity to oxidize is sensitive to solution chemistry and sediment mineralogy. A universal method for quantification of U(IV) and U(VI) in sediments has not yet been developed but the chemical extractions, when combined with solid-phase characterization, have a narrow range of applicability for sediments without U(VI).

Petrographic and mineralogical features of the uraniferous pink granites in the north eastern desert of egypt

International Nuclear Information System (INIS)

Atawiya, M.Y.; Salman, A.B.; El-Bayyomi, R.M.

1998-01-01

The present work is concerned with the petrological, mineralogical and geochemical studies of some uranium bearing younger granites in the north eastern desert of egypt particularly Gebel Gattar area. The area around Gebel Gattar comprises the following rock units (starting from the oldest): meta volcanic, diorite-grano-diorite complex- Dokhan volcanics- Hammamat sediments, younger granites and dykes. The most significant structural features are represented by NNE-ENE dominantly trending faults and joints. Petrographicaly, the pink granites are divided into normal and mineralized (uraniferous) granites. Normal granites are classified into three types; a) leucocratic perthitic granite, b) hornblende- biotite perthitic granite and c) two feldspars perthitic granite. Mineralized granites are sheared, deformed, pinkish brown in colour and strongly altered. A remarkable secondary uranium mineralization has been recorded along fault and fracture zones

Remote Sensing of Suspended Sediment Dynamics in the Mississippi Sound

Science.gov (United States)

Merritt, D. N.; Skarke, A. D.; Silwal, S.; Dash, P.

2016-02-01

The Mississippi Sound is a semi-enclosed estuary between the coast of Mississippi and a chain of offshore barrier islands with relatively shallow water depths and high marine biodiversity that is wildly utilized for commercial fishing and public recreation. The discharge of sediment-laden rivers into the Mississippi Sound and the adjacent Northern Gulf of Mexico creates turbid plumes that can extend hundreds of square kilometers along the coast and persist for multiple days. The concentration of suspended sediment in these coastal waters is an important parameter in the calculation of regional sediment budgets as well as analysis of water-quality factors such as primary productivity, nutrient dynamics, and the transport of pollutants as well as pathogens. The spectral resolution, sampling frequency, and regional scale spatial domain associated with satellite based sensors makes remote sensing an ideal tool to monitor suspended sediment dynamics in the Northern Gulf of Mexico. Accordingly, the presented research evaluates the validity of published models that relate remote sensing reflectance with suspended sediment concentrations (SSC), for similar environmental settings, with 51 in situ observations of SSC from the Mississippi Sound. Additionally, regression analysis is used to correlate additional in situ observations of SSC in Mississippi Sound with coincident observations of visible and near-infrared band reflectance collected by the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor aboard the Aqua satellite, in order to develop a site-specific empirical predictive model for SSC. Finally, specific parameters of the sampled suspended sediment such as grain size and mineralogy are analyzed in order to quantify their respective contributions to total remotely sensed reflectance.

Effect of Suez Canal Marine Sediment on Sorption of Cesium

International Nuclear Information System (INIS)

Hassan, H.B.

2016-01-01

Suez Canal is surrounded by navigation, industrial, agricultural activities and suffers from high rate of population growth that discharging waste into Suez Canal. The Suez Canal coastal waters are influenced by a complex variety of physical, geochemical and biological processes, which influence the behavior, transport and fate of containments released into the marine environment. Sorption of releasing containment such as cesium in Suez Canal water is investigated because of its toxic effect on the marine environment. The object of present study is to determine the effects some of physical and chemical characteristics of collected sediment samples from the three important locations on Suez Canal (Suez Bay, Bitter Lakes and El- Temsah Lake beaches) on sorption behavior of cesium by using batch experiment. Batch experiment was used to study the sorption of the cesium ion. The sorption process is dependent on mineral constituents of Suez Canal sediment and their characteristics. Analytical methods which included particle size and X-ray diffraction (XRD) analyses found that particle size of Suez Canal sediment samples is characterized by sand to fine sand and quartz is the main mineralogical species. Distribution coefficient (K d ) which represent geochemical processes and particle size of these sediment samples effect on the degree of cesium sorption to the sediment. Also (K d ) increase with increase cation exchangeable capacity (CEC). The Suez Canal sediment samples have low (K d ) values which effected by their physical and chemical properties. Sample (2) has highest distribution coefficient (K d ) between measured samples due to containing ratio 30% of fine sand and high ratio of organic matter.

Arsenic pollution and fractionation in sediments and mine waste samples from different mine sites

International Nuclear Information System (INIS)

Larios, Raquel; Fernández-Martínez, Rodolfo; Álvarez, Rodrigo; Rucandio, Isabel

2012-01-01

A characterization of arsenic pollution and its associations with solid mineral phases in sediments and spoil heap samples from four different abandoned mines in Spain is performed. Three of them were mercury mines located in the same mining district, in the province of Asturias, and the other one, devoted to arsenic mining, is in the province of León. A sequential extraction procedure, especially developed for arsenic, was applied for the study of arsenic partitioning. Very high total arsenic concentrations ranging 300–67,000 mg·kg −1 were found. Arsenic fractionation in each mine is broadly in accordance with the mineralogy of the area and the extent of the mine workings. In almost all the studied samples, arsenic appeared predominantly associated with iron oxyhydroxides, especially in the amorphous form. Sediments from cinnabar roasted piles showed a higher arsenic mobility as a consequence of an intense ore treatment, posing an evident risk of arsenic spread to the surroundings. Samples belonging to waste piles where the mining activity was less intense presented a higher proportion of arsenic associated with structural minerals. Nevertheless, it represents a long-term source of arsenic to the environment. - Highlights: ► Arsenic fractionation in sediments from different mining areas is evaluated. ► A sequential extraction scheme especially designed for arsenic partitioning is applied. ► As associations with mineral pools is in accordance to the mineralogy of each area. ► As distribution and mobility in each area depends on the extent of mining activity. ► As occurs mainly associated with amorphous iron oxyhydroxides in all samples.

Arsenic pollution and fractionation in sediments and mine waste samples from different mine sites

Energy Technology Data Exchange (ETDEWEB)

Larios, Raquel; Fernandez-Martinez, Rodolfo [Unidad de Espectroscopia, Division de Quimica, Departamento de Tecnologia, CIEMAT. Av. Complutense, 40, E-28040 Madrid (Spain); Alvarez, Rodrigo [Dpto. de Explotacion y Prospeccion de Minas, Universidad de Oviedo, ETS de Ingenieros de Minas, C/Independencia, 13, E-33004 Oviedo (Spain); Rucandio, Isabel, E-mail: isabel.rucandio@ciemat.es [Unidad de Espectroscopia, Division de Quimica, Departamento de Tecnologia, CIEMAT. Av. Complutense, 40, E-28040 Madrid (Spain)

2012-08-01

A characterization of arsenic pollution and its associations with solid mineral phases in sediments and spoil heap samples from four different abandoned mines in Spain is performed. Three of them were mercury mines located in the same mining district, in the province of Asturias, and the other one, devoted to arsenic mining, is in the province of Leon. A sequential extraction procedure, especially developed for arsenic, was applied for the study of arsenic partitioning. Very high total arsenic concentrations ranging 300-67,000 mg{center_dot}kg{sup -1} were found. Arsenic fractionation in each mine is broadly in accordance with the mineralogy of the area and the extent of the mine workings. In almost all the studied samples, arsenic appeared predominantly associated with iron oxyhydroxides, especially in the amorphous form. Sediments from cinnabar roasted piles showed a higher arsenic mobility as a consequence of an intense ore treatment, posing an evident risk of arsenic spread to the surroundings. Samples belonging to waste piles where the mining activity was less intense presented a higher proportion of arsenic associated with structural minerals. Nevertheless, it represents a long-term source of arsenic to the environment. - Highlights: Black-Right-Pointing-Pointer Arsenic fractionation in sediments from different mining areas is evaluated. Black-Right-Pointing-Pointer A sequential extraction scheme especially designed for arsenic partitioning is applied. Black-Right-Pointing-Pointer As associations with mineral pools is in accordance to the mineralogy of each area. Black-Right-Pointing-Pointer As distribution and mobility in each area depends on the extent of mining activity. Black-Right-Pointing-Pointer As occurs mainly associated with amorphous iron oxyhydroxides in all samples.

Mineral Supertrumps: A New Card Game to Assist Learning of Mineralogy

Science.gov (United States)

Spandler, Carl

2016-01-01

Mineralogy is an essential component of Earth Science education, yet many students struggle to obtain adequate comprehension and knowledge of mineralogy during tertiary (postsecondary) degree programs. The use of educational games can be an effective strategy for science teaching as games provide an active learning environment that enhances…

Characterization of North American lignite fly ashes. II. XRD Mineralogy

International Nuclear Information System (INIS)

McCarthy, G.J.; Johansen, D.M.; Thedchanamoorthy, A.; Steinwand, S.J.; Swanson, K.D.

1988-01-01

X-ray powder diffraction has been used to determine the crystalline phase mineralogy in samples of fly ash from each of the lignite mining areas of North America. The characteristic phases of North Dakota lignite fly ashes were periclase, lime, merwinite and the sulfate phases anhydrite, thenardite and a sodalite-structure phase. Mullite was absent in these low-Al/sub 2/O/sub 3/ ashes. Montana lignite ash mineralogy had characteristics of ND lignite and MT subbituminous coal fly ashes; mullite and C/sub 3/A were present and the alkali sulfates were absent. Texas and Louisiana lignite fly ashes had the characteristic mineralogy of bituminous coal fly ash: quartz, mullite, ferrite-spinel (magnetite) and minor hematite. Even though their analytical CaO contents were 7-14%, all but one lacked crystalline CaO-containing phases. Lignite fly ashes from Saskatchewan were generally the least crystalline of those studied and had a mineralogy consisting of quartz, mullite, ferrite spinel and periclase. Quantitative XRD data were obtained. The position of the diffuse scattering maximum in the x-ray diffractograms was indicative of the glass composition of the lignite fly ash

Advances and Opportunities in Ore Mineralogy

Directory of Open Access Journals (Sweden)

Nigel J. Cook

2017-11-01

Full Text Available The study of ore minerals is rapidly transforming due to an explosion of new micro- and nano-analytical technologies. These advanced microbeam techniques can expose the physical and chemical character of ore minerals at ever-better spatial resolution and analytical precision. The insights that can be obtained from ten of today’s most important, or emerging, techniques and methodologies are reviewed: laser-ablation inductively-coupled plasma mass spectrometry; focussed ion beam-scanning electron microscopy; high-angle annular dark field scanning transmission electron microscopy; electron back-scatter diffraction; synchrotron X-ray fluorescence mapping; automated mineral analysis (Quantitative Evaluation of Mineralogy via Scanning Electron Microscopy and Mineral Liberation Analysis; nanoscale secondary ion mass spectrometry; atom probe tomography; radioisotope geochronology using ore minerals; and, non-traditional stable isotopes. Many of these technical advances cut across conceptual boundaries between mineralogy and geochemistry and require an in-depth knowledge of the material that is being analysed. These technological advances are accompanied by changing approaches to ore mineralogy: the increased focus on trace element distributions; the challenges offered by nanoscale characterisation; and the recognition of the critical petrogenetic information in gangue minerals, and, thus the need to for a holistic approach to the characterization of mineral assemblages. Using original examples, with an emphasis on iron oxide-copper-gold deposits, we show how increased analytical capabilities, particularly imaging and chemical mapping at the nanoscale, offer the potential to resolve outstanding questions in ore mineralogy. Broad regional or deposit-scale genetic models can be validated or refuted by careful analysis at the smallest scales of observation. As the volume of information at different scales of observation expands, the level of complexity

Mineralogical and particulate morphological characterization of ...

African Journals Online (AJOL)

Six representative geophagic clayey soils from Botswana were mineralogically characterized using X-ray powder diffractometry (XRPD), optical microscopy, and environmental scanning electron microscopy (ESEM). Results of identified mineral phases revealed quartz (SiO2) as the most dominant in all samples constituting ...

Heavy mineral analysis for assessing the provenance of sandy sediment in the San Francisco Bay Coastal System

Science.gov (United States)

Wong, Florence L.; Woodrow, Donald L.; McGann, Mary

2013-01-01

Heavy or high-specific gravity minerals make up a small but diagnostic component of sediment that is well suited for determining the provenance and distribution of sediment transported through estuarine and coastal systems worldwide. By this means, we see that surficial sand-sized sediment in the San Francisco Bay Coastal System comes primarily from the Sierra Nevada and associated terranes by way of the Sacramento and San Joaquin Rivers and is transported with little dilution through the San Francisco Bay and out the Golden Gate. Heavy minerals document a slight change from the strictly Sierran-Sacramento mineralogy at the confluence of the two rivers to a composition that includes minor amounts of chert and other Franciscan Complex components west of Carquinez Strait. Between Carquinez Strait and the San Francisco Bar, Sierran sediment is intermingled with Franciscan-modified Sierran sediment. The latter continues out the Gate and turns southward towards beaches of the San Francisco Peninsula. The Sierran sediment also fans out from the San Francisco Bar to merge with a Sierran province on the shelf in the Gulf of the Farallones. Beach-sand sized sediment from the Russian River is transported southward to Point Reyes where it spreads out to define a Franciscan sediment province on the shelf, but does not continue southward to contribute to the sediment in the Golden Gate area.

Mineralogical characterization of uranium yellow cake concentrates

International Nuclear Information System (INIS)

Hausen, D.M.

1992-01-01

Uranium yellow cake concentrates have been analyzed and characterized mineralogically by means of differential thermal analysis, X-ray diffraction, infrared spectra and wet chemical methods. On the basis of mineralogical methods of characterization, the following four major structural types of yellow cake may be classified: Uranyl Hydroxide Hydrate, UO 2 (OH) 2 nH 2 O; Basic Uranyl Sulfate Hydrate, (UO 2 ) x (SO 4 ) y (OH) s(x-y ).nH 2 O; Sodium Para-Uranate, Na 5 U 7 O 24 and Uranyl Peroxide Hydrate, UO 4 .nH 2 O. In this paper conditions of yellow cake preparation and characterization are described, along with discussion of significance of structural types to the physical and chemical properties of yellow cake production

Zajímavý profil sedimentů s akumulací koprolitů, ústřic a červů (Plaňany, česká křídová pánev)

Czech Academy of Sciences Publication Activity Database

Žítt, Jiří

- (2001), s. 25-27 ISSN 0514-8057 R&D Projects: GA ČR GA205/99/1315 Institutional research plan: CEZ:AV0Z3013912 Keywords : Sediments * Taphonomy of macrofauna * Bohemian Cretaceous Basin Subject RIV: DB - Geology ; Mineralogy

Sediment pollution in margins of the Lake Guaíba, Southern Brazil.

Science.gov (United States)

de Andrade, Leonardo Capeleto; Tiecher, Tales; de Oliveira, Jessica Souza; Andreazza, Robson; Inda, Alberto Vasconcellos; de Oliveira Camargo, Flávio Anastácio

2017-12-02

Sediments are formed by deposition of organic and inorganic particles on depth of water bodies, being an important role in aquatic ecosystems, including destination and potential source of essential nutrients and heavy metals, which may be toxic for living organisms. The Lake Guaíba supplies water for approximately two million people and it is located in the metropolitan region of Porto Alegre, Rio Grande do Sul State, Brazil. Thus, the aim of this study was to evaluate the sediment pollution in the margins of Lake Guaíba in the vicinity of Porto Alegre city. Surface sediment was sampled in 12 sites to assess the concentration of several elements (C, N, P, Fe, Al, Ca, Mg, Na, K, Mn, Ba, Zn, V, Pb, Cu, Cr, Ni, Cd, Mo, and Se) and the mineralogical composition. Sediment in margins of Lake Guaíba presented predominantly (> 95%) sandy fraction in all samples, but with significant differences between evaluated sites. Sediments in the margins of Lake Guaíba showed indications of punctual water pollution with Pb, Cu, Cr, Ni, TOC, TKN, and P, mainly derived from urban streams that flow into the lake. In order to solve these environmental liabilities, public actions should not focus only on Guaíba, but also in the streams that flow into the lake.

Nagra technical report 14-02, Geological basics - Dossier VI - Barrier properties of proposed host rock sediments and neighbouring rock

International Nuclear Information System (INIS)

Gautschi, A.; Deplazes, G.; Traber, D.; Marschall, P.; Mazurek, M.; Gimmi, T.; Maeder, U.

2014-01-01

This dossier is the sixth of a series of eight reports concerning the safety and technical aspects of locations for the disposal of radioactive wastes in Switzerland. It discusses the barrier properties of the proposed host rock sediments and neighbouring rock layers. The mineralogical composition of the host rocks are discussed as are their pore densities and hydrological properties. Diffusion aspects are discussed. The aquifer systems in the proposed depository areas and their classification are looked at. The barrier properties of the host rocks and those of neighbouring sediments are discussed. Finally, modelling concepts and parameters for the transport of radionuclides in the rocks are discussed

Chemical and mineralogical characterization of iron concretions of some Brazilian soils

International Nuclear Information System (INIS)

Soares, M.F.

1980-01-01

Chemical and physical analyses of concretionary materials were carried out, with the purpose of getting chemical and mineralogical characteristics of concretions found in some Brazilian soils in different ecosystems spectrophotometry was used for the chemical characterization, and x-ray diffraction and Moessbauer spectroscopy for the mineralogical characterization of the materials studied. (A.R.H.) [pt

Extraordinary Biomass-Burning Episode and Impact Winter Triggered by the Younger Dryas Cosmic Impact approximate to 12,800 Years Ago. 2. Lake, Marine, and Terrestrial Sediments

Czech Academy of Sciences Publication Activity Database

Wolbach, W. S.; Ballard, J. P.; Mayewski, P. A.; Parnell, A. C.; Cahill, N.; Adedeji, V.; Bunch, T. E.; Dominguez-Vazquez, G.; Erlandson, J. M.; Firestone, R. B.; French, T. A.; Howard, G.; Israde-Alcántara, I.; Johnson, J. R.; Kimbel, D.; Kinzie, Ch. R.; Kurbatov, A.; Kletetschka, Günther; LeCompte, M. A.; Mahaney, W. C.; Mellot, A. L.; Mitra, S.; Maiorana-Boutilier, A.; Moore, Ch. R.; Napier, W. M.; Parlier, J.; Tankersley, K. B.; Thomas, B. C.; Wittke, J. H.; West, A.; Kennett, J. P.

2018-01-01

Roč. 126, č. 2 (2018), s. 185-205 ISSN 0022-1376 Institutional support: RVO:67985831 Keywords : biomass burning * climate feedback * climate variation * ice core * lacustrine deposit * marine sediment * paleoclimate * quantitative analysis * terrestrial deposit * winter * Younger Dryas Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Geology Impact factor: 1.952, year: 2016

Mineralogia de solos com excesso de sódio no estado do Ceará

Directory of Open Access Journals (Sweden)

F. O. B. Mota

1999-12-01

Full Text Available Foram estudados dois perfis de solos com problemas de sodicidade (Planossolo Solódico e Solonetz-Solodizado, no estado do Ceará, com o objetivo de conhecer a mineralogia das frações areia, silte e argila e os processos de alterações que ocorrem nos respectivos minerais. A areia e o silte grosso foram avaliados por microscopia de polarização e contraste de fase, enquanto o silte fino e a argila foram analisados por difração de raios-X. Utilizou-se, ainda, a microscopia eletrônica de varredura para obtenção de informações complementares sobre as transformações mineralógicas ocorridas nos horizontes dos dois perfis. Verificou-se que o Planossolo Solódico apresenta na fração argila quantidades mais ou menos equivalentes de caulinita e montmorilonita no horizonte 2Btn, o mesmo acontecendo com as proporções de caulinita e vermiculita no horizonte A. Nas outras frações, foram encontrados teores variáveis de quartzo, plagioclásios, hornblenda e biotita. Por sua vez, o Solonetz-Solodizado mostrou uma fração argila essencialmente caulinítica ao longo de todo o perfil e com quantidades variáveis de quartzo, feldspato e biotita nas outras frações. Em ambos os perfis, o enriquecimento de argila no Bt resultou essencialmente das alterações "In situ" dos minerais primários intemperizáveis contidos na rocha subjacente. A hipótese de alternância de processos de oxi-redução nos horizontes A e, ou, E, em razão da baixa permeabilidade do horizonte 2Btn, provocando um processo de ferrólise naqueles horizontes, é também uma alternativa de gênese que não pode ser descartada para explicar o alto contraste textural desses solos. O intemperismo da albita e de outros plagioclásios ricos em sódio, o clima semi-árido, e a drenagem impedida são os fatores condicionantes dos percentuais elevados de sódio, observados nos dois pedons. Também nos dois solos, os teores destoantes de quartzo, a geomorfologia da região e a

Chemical and mineralogical characterization of elbaites from the Alto Quixaba pegmatite, Seridó province, NE Brazil

Directory of Open Access Journals (Sweden)

Ana C.M. Ferreira

2005-12-01

Full Text Available The Alto Quixaba pegmatite, Seridó region, northeastern Brazil, is a 60º/80ºSW-trending subvertical dike discordantly intruded into biotite schists of the Upper Neoproterozoic Seridó Formation. It has three distinct mineralogical and textural zones, besides a replacement body that cuts the pegmatite at its central portion and in which occur, among other gem minerals, colored elbaites. Elbaites usually occur as prismatic crystals, elongate according to the c-axis, with rounded faces and striations parallel to this axis. Optically, crystals are uniaxial negative with strong pleochroism; refractive index extraordinary axis = 1.619-1.622 and ordinary axis = 1.639-1.643, birefringence between 0.019 and 0.021, average relative density of 3.07, and the following unit cell parameters: ao = 15.845 Å, co = 7.085 Å and V = 1540.476 Å. There is alkali deficiency in the X site of 12-17%. The elbaites are relatively enriched in MnO (1.69 to 2.87% and ZnO (up to 2.98%.O pegmatito Alto Quixaba na região do Seridó, nordeste do Brasil, é um corpo subvertical de direção 60°/80°SW intrudindo discordante biotita xistos da Formação Seridó. Apresenta três zonas distintas em termos de mineralogia e textura, al��m de uma zona de alteração em forma de dique na qual ocorre, entre outros minerais-gema, elbaítas coloridas. As elbaítas ocorrem como cristais prismáticos alongados de acordo com o eixo C, com faces arredondadas e estrias paralelas a esse eixo. Os cristais são uniaxiais negativos e apresentam forte pleocroísmo; índices de refração nE = 1,619-1,622 e nO = 1.639-1.643, birrefrigência entre 0,019 e 0,021, densidade relativa de 3,07, e os parâmetros seguintes da célula unitária: ao = 15,845 Å, co = 7,085 Å e V = 1540,476 Å. O sítio X apresenta deficiência em álcalis entre 12 e 17%. As elbaítas são relativamente ricas em MnO (1,69 a 2,87% e ZnO (até 2,98%.

Mineralogic Zonation Within the Tuff Confining Unit, Yucca Flat, Nevada Test Site

International Nuclear Information System (INIS)

Lance Prothro

2005-01-01

Recently acquired mineralogic data from drill hole samples in Yucca Flat show that the tuff confining unit (TCU) can be subdivided into three mineralogic zones based on the relative abundances of primary and secondary mineral assemblages. These zones are (1) an upper zone characterized by the abundance of the zeolite mineral clinoptilolite with lesser amounts of felsic and clay minerals; (2) a middle zone with felsic minerals dominant over clinoptilolite and clay minerals; and (3) a basal argillic zone where clay minerals are dominant over felsic minerals and clinoptilolite. Interpretation of the mineralogic data, along with lithologic, stratigraphic, and geophysical data from approximately 500 drill holes, reveals a three-layer mineralogic model for the TCU that shows all three zones are extensive beneath Yucca Flat. The mineralogic model will be used to subdivide the TCU in the Yucca Flat hydrostratigraphic framework model, resulting in a more accurate and versatile framework model. In addition, the identification of the type, quantity, and distribution of minerals within each TCU layer will permit modelers to better predict the spatial distribution and extent of contaminant transport from underground tests in Yucca Flat, at both the level of the hydrologic source term and the corrective action unit

Determining Sediment Sources in the Anacostia River Watershed

Science.gov (United States)

Devereux, O. H.; Needelman, B. A.; Prestegaard, K. L.; Gellis, A. C.; Ritchie, J. C.

2005-12-01

Suspended sediment is a water-quality problem in the Chesapeake Bay. This project is designed to identify sediment sources in an urban watershed, the Northeast Branch of the Anacostia River (in Washington, D.C. and Maryland - drainage area = 188.5 km2), which delivers sediment directly to the Bay. This watershed spans two physiographic regions - the Piedmont and Coastal Plain. Bank sediment and suspended-sediment deposits were characterized using the following techniques: radionuclide (Cs-137) analysis by gamma ray spectrometry, trace-element analysis by ICP-MS, clay mineralogy by XRD, and particle-size analysis by use of a laser particle-size analyzer. Sampling of bank and suspended sediment was designed to: a) characterize tributary inputs from both Piedmont and Coastal Plain sources, and b) differentiate tributary inputs from bank erosion along the main stem of the Northeast Branch. Thirteen sample sites were chosen that represent tributary source areas of each physiographic region and the main stem where mixing occurs. Surface samples of the banks were compared to overbank deposits from a ten year storm (a proxy for the suspended sediments). Fingerprint components are selected from these data. Cesium-137 concentrations were analyzed for bank and overbank deposits for each physiographic region. No clear differences were seen between the two physiographic regions. Significant differences were observed between upland tributaries and the main stem of the Anacostia River. The average activity of Cs-137 for the tributaries was 5.4 bq/kg and the average for the main stem was 1.1 bq/kg. This suggests that there is significant erosion and storage of sediment in the tributaries. The low activity from Cs-137 in the main stem suggests a lack of storage of sediment along the main stem of the river. For the trace-element data, we focused on elements that showed significant variation among the sites. For the bank sediment, these elements include: Sr, V, Y, Ce, and Nd. For the

The mineralogy of ordinary chondrites and implications for asteroid spectrophotometry

Science.gov (United States)

Mcsween, Harry Y., Jr.; Bennett, Marvin E., III; Jarosewich, Eugene

1991-01-01

Published data from bulk chemical analyses of 94 ordinary chondrites are compiled in a table of normative mineralogy and discussed in detail. Significant variations in olivine, pyroxene, and metal abundance ratios are found within each chondrite class and attributed to redox processes superimposed on initial differences in metal/silicate ratios. The use of the diagrams constructed here to predict the mineralogic characteristics of asteroids on the basis of spectrophotometric observations is suggested.

Integrated acoustic, mineralogy, and geomechanics characterization of the Huron shale southern West Virginia, USA

Energy Technology Data Exchange (ETDEWEB)

Franquet, J.A.; Mitra, Arijit; Warrington, D.S.; Moos, Daniel; Lacazette, Alfred [Society of Petroleum Engineers (Canada)

2011-07-01

Successful hydraulic fracturing and horizontal drilling are the key to exploiting unconventional shale gas reservoirs. Acoustic anisotropy, in-situ stress, mineralogy and organic matter content are important factors in well completion design. This paper explores an integrated acoustic, mineralogy and geomechanics characterization of the Huron shale, located in south west Virginia, USA. The study consisted of acquiring the borehole acoustic and mineralogy logging data, in addition to conventional logs, from a vertical well prior to hydraulic fracturing and microseismic monitoring. The acoustic data were processed for borehole Stoneley reflective indicators and radial velocity variations. Substantial transverse acoustic anisotropy was noticed and used to acquire vertical and horizontal dynamic elastic properties. A micromechanical constitutive model, arrived at through mineralogy and petrophysical analysis, was used to produce the stress-strain behavior of the rock. This stress profile, with accurate mineralogy and petrophysical analysis, provides important information for best selection of lateral wells and helps in the identification of natural fracture barriers.

Mineralogical and lithochemical studies of strata beneath the Harwell research site

International Nuclear Information System (INIS)

Wilmot, R.D.; Morgan, D.J.

1982-11-01

Determinations have been made of the mineralogy and lithochemistry of the principal lithological units of the Mesozoic and Palaeozoic rocks penetrated by boreholes at the Harwell Research Site. Samples were taken at approximately 9m intervals from the Upper Greensand to the Coal Measures, together with a number from the Chalk. Mineralogical analyses were carried out using X-ray diffraction, with thermal analysis and surface area measurements aiding quantification. Major and trace element determinations were made using direct electron excitation X-ray spectrometry and X-ray fluorescence respectively. Other chemical determinations included organic carbon, sulphate and 'exchangeable' cations. The mineralogical and lithochemical variations within and between the major litho-stratigraphic units are discussed and compared with published data for other localities. (author)

Characterization and quantification of suspended sediment sources to the Manawatu River, New Zealand.

Science.gov (United States)

Vale, S S; Fuller, I C; Procter, J N; Basher, L R; Smith, I E

2016-02-01

Knowledge of sediment movement throughout a catchment environment is essential due to its influence on the character and form of our landscape relating to agricultural productivity and ecological health. Sediment fingerprinting is a well-used tool for evaluating sediment sources within a fluvial catchment but still faces areas of uncertainty for applications to large catchments that have a complex arrangement of sources. Sediment fingerprinting was applied to the Manawatu River Catchment to differentiate 8 geological and geomorphological sources. The source categories were Mudstone, Hill Subsurface, Hill Surface, Channel Bank, Mountain Range, Gravel Terrace, Loess and Limestone. Geochemical analysis was conducted using XRF and LA-ICP-MS. Geochemical concentrations were analysed using Discriminant Function Analysis and sediment un-mixing models. Two mixing models were used in conjunction with GRG non-linear and Evolutionary optimization methods for comparison. Discriminant Function Analysis required 16 variables to correctly classify 92.6% of sediment sources. Geological explanations were achieved for some of the variables selected, although there is a need for mineralogical information to confirm causes for the geochemical signatures. Consistent source estimates were achieved between models with optimization techniques providing globally optimal solutions for sediment quantification. Sediment sources was attributed primarily to Mudstone, ≈38-46%; followed by the Mountain Range, ≈15-18%; Hill Surface, ≈12-16%; Hill Subsurface, ≈9-11%; Loess, ≈9-15%; Gravel Terrace, ≈0-4%; Channel Bank, ≈0-5%; and Limestone, ≈0%. Sediment source apportionment fits with the conceptual understanding of the catchment which has recognized soft sedimentary mudstone to be highly susceptible to erosion. Inference of the processes responsible for sediment generation can be made for processes where there is a clear relationship with the geomorphology, but is problematic for

Geochemical and mineralogical characteristics of Lithomargic clay

African Journals Online (AJOL)

Administrator

Geochemical and mineralogical characteristics of Lithomargic clay. GEOCHEMICAL AND .... tries, as filling material in the pulp and paper, toothpaste and paint industries as well ..... tions very vital to human health and other ac- tivities of man.

Forsmark site investigation. Investigation of marine and lacustrine sediment in lakes. Field data 2003

Energy Technology Data Exchange (ETDEWEB)

Hedenstroem, Anna [SGU, Uppsala (Sweden)

2003-04-01

The aim of this activity is to describe the aerial and stratigraphical distribution of marine and lacustrine sediment i.e. sediment overlaying the glacial till and/or bedrock surface, in lakes in the Forsmark area. The investigation is carried out within areas where mapping of unconsolidated Quaternary deposits is presently carried out. Since small and shallow lakes cover a large part of the region, this work will give important information on the distribution and stratigraphy of sedimentary deposits not included in the regular mapping of unconsolidated Quaternary deposits within the site investigation programme. Samples were also collected for laboratory analyses of grain size distribution, mineralogical composition as well as the total content of C, N and S and calcium carbonate. The analyses will be carried out on selected samples of representative sedimentary units in order to characterise the chemical and physical properties of the unconsolidated deposits. The analytical data will be useful for the hydrogeological modelling and for models of the Quaternary evolution of the area. The mineralogical analyses of clay may provide information on the origin of the clay particles. One stratigraphic sequence from Lake Eckarfjaerden will be stored for later analyses, e.g. pollen analysis. This report includes field data from spring 2003. Together, the field data and the forthcoming results from the laboratory analyses will form the basis for construction of stratigraphical profiles to be presented in a following report in the fall 2003.

Forsmark site investigation. Investigation of marine and lacustrine sediment in lakes. Field data 2003

International Nuclear Information System (INIS)

Hedenstroem, Anna

2003-04-01

The aim of this activity is to describe the aerial and stratigraphical distribution of marine and lacustrine sediment i.e. sediment overlaying the glacial till and/or bedrock surface, in lakes in the Forsmark area. The investigation is carried out within areas where mapping of unconsolidated Quaternary deposits is presently carried out. Since small and shallow lakes cover a large part of the region, this work will give important information on the distribution and stratigraphy of sedimentary deposits not included in the regular mapping of unconsolidated Quaternary deposits within the site investigation programme. Samples were also collected for laboratory analyses of grain size distribution, mineralogical composition as well as the total content of C, N and S and calcium carbonate. The analyses will be carried out on selected samples of representative sedimentary units in order to characterise the chemical and physical properties of the unconsolidated deposits. The analytical data will be useful for the hydrogeological modelling and for models of the Quaternary evolution of the area. The mineralogical analyses of clay may provide information on the origin of the clay particles. One stratigraphic sequence from Lake Eckarfjaerden will be stored for later analyses, e.g. pollen analysis. This report includes field data from spring 2003. Together, the field data and the forthcoming results from the laboratory analyses will form the basis for construction of stratigraphical profiles to be presented in a following report in the fall 2003

Kaolin clays from Patagonia - Argentina. Relationship between the mineralogy and ceramic properties

International Nuclear Information System (INIS)

Factorovich, J.C.; Badino, D.; Cravero, F.; Dominguez, E.

1997-01-01

The mineralogy, grain size distribution, chemical composition, S and C contents, plasticity, and cationic exchange capacity are determined in the sedimentary kaolinitic clays from the clay pits Puma Negra, Puma Gris, Tincar Super; and Chenque and Cardenal located in Santa Cruz and Chubut Provinces. Mineralogy and Particle size distribution of > 5, 5-2 and <2μ fractions are determined. Modulus of rupture, 1100 and 1250 deg C shrinkage and water absorption and whiteness are found. It is accomplished a statistics correlation between the characteristics of grain size distribution, mineralogy, and other physical properties with the main ceramic properties to understand its influence in the ceramic process. (author)

Mineralogy of subducted clay and clay restite in the lower mantle

Science.gov (United States)

Armstrong, L.; Skora, S. E.; Walter, M. J.

2012-12-01

Seismic tomography indicates that subducting oceanic lithosphere often penetrates the transition zone and eventually the lower mantle [e.g. 1, 2]. While mineralogical changes in the mafic and ultramafic portions of slabs have been well documented experimentally, the phase relations of overlying sediments at pressures above 25 GPa remain poorly studied. This is in part because sediments are expected to partially melt at sub-arc depth (P~2.5-4.5 GPa), and contribute to the genesis of arc magmas. Sediment restites left behind after the extraction of low pressure melts undergo major chemical changes, according to the melting reaction: Coe+Phen+Cpx+H2O = Grt+Ky+Melt [3]. However, sediments may not always melt depending on the thermal regime and volatile availability and composition [3]. Hence, chemically unmodified sediments as well as restites may be entrained to greater depths and contribute to compositional heterogeneity in the deep mantle. Indeed, mineral inclusions with compositions indicative of subducted sedimentary protoliths (CAS-phase; K-hollandite; stishovite) have been reported in 'ultradeep' diamonds and suggest that deep subduction and survival of sediments occurs to at least transition zone depths [4]. With this in mind, we have performed laser heated diamond anvil cell experiments at pressures of 8-80 GPa on two anhydrous glass starting materials: a marine clay and the restite that is left after 50% melt extraction of this clay at 3 GPa and 800 °C [3]. We chose to work with an anhydrous version of the marine clay given that the investigated pressure range exceeds that of phengite stability [5], and phengite is the only hydrous phase in subducted sediments at UHP conditions. The clay was heated along a P-T path representative of a cold subduction geotherm, whereas the clay restite was heated along a hotter subduction geotherm consistent with low pressure melting. Phases were identified by synchrotron X-ray micro-diffraction at beamline I15 of the Diamond

Risks attributable to water quality changes in shallow potable aquifers from geological carbon sequestration leakage into sediments of variable carbonate content

DEFF Research Database (Denmark)

Cahill, Aaron Graham; Jakobsen, Rasmus; Mathiesen, Tina Bay

2013-01-01

Denmark including; siliceous, carbonate and clay materials. Sediments were exposed to CO2 and hydro-geochemical effects were observed in order to improve general understanding of trace metal mobility, quantify carbonate influence, assess risks attributable to fresh water resources from a potential leak...... and aid monitoring measurement and verification (MMV) program design. Results demonstrate control of water chemistry by sediment mineralogy and most significantly carbonate content, for which a potential semi-logarithmic relationship with pH and alkalinity was observed. In addition, control of water...... changes in water chemistry with large increases in all major and trace elements coupled to minimal reductions in pH due to high buffering capacity. Silicate dominated sediments exhibited small changes in dissolved major ion concentrations and the greatest reductions in pH, therefore displaying...

Quantifying modern erosion rates and river-sediment contamination in the Bolivian Andes

Science.gov (United States)

Vezzoli, Giovanni; Ghielmi, Giacomo; Mondaca, Gonzalo; Resentini, Alberto; Villarroel, Elena Katia; Padoan, Marta; Gentile, Paolo

2013-08-01

We use petrographic, mineralogical and geochemical data on modern river sediments of the Tupiza basin in the Bolivian Andes to investigate the relationships among human activity, heavy-metal contamination of sediments and modern erosion rates in mountain fluvial systems. Forward mixing model was used to quantify the relative contributions from each main tributary to total sediment load of the Tupiza River. The absolute sediment load was estimated by using the Pacific Southwest Inter Agency Committee model (PSIAC, 1968) after two years of geological field surveys (2009; 2010), together with data obtained from the Instituto Nacional del Agua public authority (INA, 2007), and suspended-load data from Aalto et al. (2006). Our results indicate that the sediment yield in the drainage basin is 910 ± 752 ton/km2year and the mean erosion rate is 0.40 ± 0.33 mm/year. These values compare well with erosion rates measured by Insel et al. (2010) using 10Be cosmogenic radionuclide concentrations in Bolivian river sediments. More than 40% of the Tupiza river load is produced in the upper part of the catchment, where highly tectonized and weathered rocks are exposed and coupled with sporadic land cover and intense human activity (mines). In the Rio Chilco basin strong erosion of upland valleys produce an increase of erosion (˜10 mm/year) and the influx of large amounts of sediment by mass wasting processes. The main floodplain of the Tupiza catchment represents a significant storage site for the heavy metals (˜657 ton/year). Fluvial sediments contain zinc, lead, vanadium, chromium, arsenic and nickel. Since the residence time of these contaminants in the alluvial plain may be more than 100 years, they may represent a potential source of pollution for human health.

Distribution and assessment of sediment toxicity in Tamaki Estuary, Auckland, New Zealand

Science.gov (United States)

Abrahim, G. M. S.; Parker, R. J.; Nichol, S. L.

2007-07-01

Heavy metal levels in surface sediments from Tamaki Estuary demonstrate significant up estuary increases in Cu, Pb, Zn, Cd and mud concentrations. Increased metal levels towards the head of the estuary are linked to local catchment sources reflecting the historical development, industrialisation and urbanisation of catchment areas surrounding the upper estuary. The relatively narrow constriction in the middle estuary (Panmure area), makes it susceptible to accumulation of upper estuary pollutants, since the constriction reduces circulation and extends the time required for fine waterborne sediments in the upper estuary to exchange with fresh coastal water. As a result fine fraction sediments trapped in the upper estuary facilitate capture and retention of pollutants at the head of the estuary. The increase in sandy mud poor sediments towards the mouth of the estuary is associated with generally low metal concentrations. The estuary’s geomorphic shape with a mid estuary constriction, sediment texture and mineralogy and catchment history are significant factors in understanding the overall spatial distribution of contaminants in the estuary. Bulk concentration values for Cu, Pb, Zn, and Cd in all the studied surface samples occur below ANZECC ISQG-H toxicity values. Cd and Cu concentrations are also below the ISQG-L toxicity levels for these elements. However, Pb and Zn concentrations do exceed the ISQG-L values in some of the surface bulk samples in the upper estuary proximal to long established sources of catchment pollution.

Holocene Evolution and Sediment Provenance of Horn Island, Mississippi, USA

Science.gov (United States)

Schulze, N.; Wallace, D. J.; Miner, M. D.

2017-12-01

As one of the most stable islands in the Mississippi-Alabama barrier island chain, Horn Island provides critical habitat, plays an important role in regulating estuarine conditions in the Mississippi Sound, and helps to attenuate wave energy and storm surge for the mainland. The provenance of sediments comprising Horn Island is largely unknown and has implications for mode of island genesis and evolution. The existing literature proposes that island chain formation was initiated by bar emergence from a subaqueous spit that grew laterally westward from Dauphin Island in the east. Decelerating sea level rise 4,000 to 5,000 years ago facilitated island formation. This proposed mode of formation is supported by a lone radiocarbon date from lagoonal sediments below Horn Island, suggesting the system formed after 4,615 ± 215 years BP. Rivers supplying suspended sediment include the Mississippi, Pascagoula, Mobile and Apalachicola, but the variable nature of their paths and sediment supply means that Horn Island has received differing amounts of sediment from these proximal rivers throughout the Holocene. To analyze the stratigraphy and sediment characteristics of Horn Island, we will utilize 24 vibracores (up to 6 meters in length) from offshore Horn Island that were obtained by the United States Geological Survey (USGS) and 9 onshore drill cores (up to 28 meters in length) from the Mississippi Department of Environmental Quality. High-resolution LiDAR data collected by the National Oceanic and Atmospheric Administration in 2010 will be used to describe modern geomorphic barrier environments. We will employ down-core x-ray diffraction and x-ray fluorescence analyses to identify mineralogical and chemical signatures that potentially correspond to unique signatures of the fluvial sources of proximal rivers. New radiocarbon ages will be used to constrain the timing of island formation and alterations in sediment supply. High-resolution shallow geophysical data will provide

GEOCHEMISTRY AND MINERALOGICAL EVALUATION OF ...

African Journals Online (AJOL)

Dr Osondu

2011-11-05

Nov 5, 2011 ... mica-schist. AAS and XRD techniques were employed in the determination of chemical and mineralogical composition of ten .... Sample %. British Standard. Institution (BSI). %. American standard. (ASTM) %. SiO2. Al2O3. Fe2O3. TiO2. CaO. MgO. Na2O. K2O. P2O5. LO I. 46.65. 47.67. 1.02. 1.28. 0.10. 0.02.

Geogenically vs. anthropogenic pollution of river sediments by potentially toxic trace elements on model locations; Geogenne vs. antropogenne znecistenie riecnych sedimentov potencialne toxickymi stopovymi prvkami na modelovych lokalitach

Energy Technology Data Exchange (ETDEWEB)

Pazicka, A. [Univerzita Komenskeho, Prirodovedecka fakulta, Katedra geochemie, 84215 Bratislava (Slovakia); Michnova, J. [Univerzita Komenskeho, Prirodovedecka fakulta, Katedra loziskovej geologie, 84215 Bratislava (Slovakia)

2013-04-16

Rtg diffraction analysis was used to evaluate the stream sediments mineralogical composition of Maly Dunaj, Nitra and Hron rivers. Identified minerals in the sediment samples, in addition with chemical analysis of selected elements (As, Sb, Hg, Cu, Pb), helped to determine the origin (geogenic vs. anthropogenic) of these potentially toxic trace elements. The results show that Maly Dunaj sediments are mostly loaded with anthropogenic contamination (agriculture, industry). Heavy minerals identified in Nitra sediments suggest natural higher concentrations of Cu, Pb and Fe. On the other hand As and Hg contamination is caused by human activities. The main sources are the coal ash impoundments in Zemianske Kostolany and Chalmova (for As) and Novacke chemicke zavody a.s. (for Hg). Stream sediments of Hron river are mostly influneced by the geology of the catchment area (Sb - As deposits in Nizke Tatry, volcanics). (authors)

Are conventional statistical techniques exhaustive for defining metal background concentrations in harbour sediments? A case study: The Coastal Area of Bari (Southeast Italy).

Science.gov (United States)

Mali, Matilda; Dell'Anna, Maria Michela; Mastrorilli, Piero; Damiani, Leonardo; Ungaro, Nicola; Belviso, Claudia; Fiore, Saverio

2015-11-01

Sediment contamination by metals poses significant risks to coastal ecosystems and is considered to be problematic for dredging operations. The determination of the background values of metal and metalloid distribution based on site-specific variability is fundamental in assessing pollution levels in harbour sediments. The novelty of the present work consists of addressing the scope and limitation of analysing port sediments through the use of conventional statistical techniques (such as: linear regression analysis, construction of cumulative frequency curves and the iterative 2σ technique), that are commonly employed for assessing Regional Geochemical Background (RGB) values in coastal sediments. This study ascertained that although the tout court use of such techniques in determining the RGB values in harbour sediments seems appropriate (the chemical-physical parameters of port sediments fit well with statistical equations), it should nevertheless be avoided because it may be misleading and can mask key aspects of the study area that can only be revealed by further investigations, such as mineralogical and multivariate statistical analyses. Copyright © 2015 Elsevier Ltd. All rights reserved.

Chemical characterisation of dredged sediments in relation to their potential use in civil engineering.

Science.gov (United States)

Zuliani, Tea; Mladenovič, Ana; Ščančar, Janez; Milačič, Radmila

2016-04-01

During capital and/or maintenance dredging operations, large amounts of material are produced. Instead of their discharge, dredged sediments may be a valuable natural resource if not contaminated. One of the possible areas of application is civil engineering. In the present work, the environmental status of seaport dredged sediment was evaluated in order to investigate its potential applicability as a secondary raw material. Sediments were analysed for element concentrations in digested samples, aqueous extracts and fractions from sequential extraction; for fluoride, chloride and sulphate concentrations in aqueous extracts; and for tributyltin (TBT). Granulometric and mineralogical compositions were also analysed. The elemental impact was evaluated by calculation of the enrichment factors. The total element concentrations determined showed moderate contamination of the dredged sediments as was confirmed also by their moderate enrichment factors, presumably as a result of industrial and port activities. Elemental concentrations in the aqueous extract were very low and therefore do not represent any hazard for the environment. The water-soluble element concentrations were under the threshold levels set by the EU Directive on the landfill of waste, on the basis of which the applicability of dredged sediments in civil engineering is evaluated, while the content of chloride and sulphate were above the threshold levels. It was found out that due to the large amounts of sediment available, civil engineering applications such as the construction of embankments and backfilling is the most beneficial recycling solution at present.

Partitioning sediment flux by provenance and tracing erosion patterns in Taiwan

Science.gov (United States)

Resentini, Alberto; Goren, Liran; Castelltort, Sébastien; Garzanti, Eduardo

2017-07-01

We critically evaluate the potential and limitations of an alternative way to calculate erosion rates based on petrographic and mineralogical fingerprints of fluvial sediments coupled with gauged sediment fluxes. Our approach allows us to apportion sediment loads to different lithological units, and consequently to discriminate erosion rates in different tectonic domains within each catchment. Our provenance data on modern Taiwanese sands indicate focused erosion in the Backbone Range and Tananao Complex of the retrowedge. Lower rates are inferred for the northern part of the island characterized by tectonic extension and for the western foothills in the prowedge. The principal factor of uncertainty affecting our estimates is the inevitably inaccurate evaluation of total sediment load, because only the suspended flux was measured. Another is the assumption that suspended load and bed load are derived from the same sources in fixed proportions. Additional errors are caused by the insufficiently precise definition of lithologically similar compositional end-members and by the temporal variability of sediment composition at the outlet of each catchment related to the spatial variability of erosional processes and triggering agents such as earthquakes, typhoons, and landslides. To evaluate the robustness of our findings, we applied a morphometric technique based on the stream-power model. The results obtained are broadly consistent, with local discrepancies ascribed to poorly constrained assumptions and choices of scaling parameters. Our local erosion estimates are consistent with GPS uplift rates measured on a decadal timescale and generally higher than basin-wide results inferred from cosmogenic-nuclide and thermochronology data.

Fracture mineralogy of the Forsmark site. SDM-Site Forsmark

Energy Technology Data Exchange (ETDEWEB)

Sandstroem, Bjoern (Dept. of Earth Sciences, Univ. of Goeteborg (Sweden)); Tullborg, Eva-Lena (Terralogica AB, Graabo (Sweden)); Smellie, John (Conterra AB, Luleaa (Sweden)); MacKenzie, Angus B. (SUERC, Scottish Enterprise Technology Park, East Kilbride (United Kingdom)); Suksi, Juhani (Dept. of Chemistry, Univ. of Helsinki, Helsinki (Finland))

2008-08-15

Detailed investigations of the fracture mineralogy and altered wall rock have been carried out as part of the site characterisation programme between 2003 and 2007 at Forsmark. The results have been published in a number of P-reports and in contributions to scientific journals. This report summarises and evaluates the data obtained during the detailed fracture mineralogical studies. The report includes descriptions of the identified fracture minerals and their chemical composition. A sequence of fracture mineralisations has been distinguished and provides information of the low to moderate temperature (brittle) geological and hydrogeological evolution at the site. Special focus has been paid to the chemical and stable isotopic composition of calcite to obtain palaeohydrogeological information. Chemical analyses of bulk fracture filling material have been carried out to identify possible sinks for certain elements and also to reveal the presence of minor phases rich in certain elements which have not been possible to detect by X-ray diffraction (XRD). Statistical analysis of the mineralogy in fractures outside deformation zones (i.e. within fracture domains FFM01, FFM02, FFM03 and FFM06) have been carried out concerning variation of fracture mineral distribution at depth and in different fracture domains. Uranium contents and uranium-series isotopes have been analysed on fracture coating material from hydraulically conductive fractures. Such analyses are also available from the groundwaters and the results are combined in order to reveal recent (< 1 Ma) removal/deposition of uranium in the fracture system. The redox conditions in the fracture system have been evaluated based on mineralogical and chemical indicators as well as Moessbauer analyses

Mineralogy, geochemistry, and palynology of modern and late Tertiary mangrove deposits in the Barreiras Formation of Mosqueiro Island, northeastern Pará state, eastern Amazonia

Science.gov (United States)

Behling, Hermann; da Costa, Marcondes Lima

2004-12-01

A coastal environment has been interpreted from 110 cm thick mudstone deposits found at the base of a 10 m immature laterite profile, which forms the modern coastal cliff on Mosqueiro Island in northeastern Pará state, northern Brazil. The late Tertiary sediment deposits of the Barreiras Formation are studied by multi-element geochemistry and pollen analyses. The mineralogical and geochemical results show that the gray, organic-rich deposits are composed of kaolinite, quartz, and illite/muscovite, as well as pyrite and anatase. They are rich in SiO 2, Al 2O 3, and some FeO. The composition is homogenous, indicating that the detritus source area is formed of lateritic soils derived from acid rock composition. Their chemical composition, including trace elements, is somewhat comparable to continental shale, and the values are below the upper continental Earth crust composition. The pollen analytical data document that the mudstone deposits were formed by an ancient mangrove ecosystem. Mineralogical, geochemical, and pollen analytical data obtained from late Tertiary mangrove deposits are compared with modern mangrove deposits from the Bragança Peninsula of the northeastern coast of Pará state. Although the pollen composition of the deposits is very similar to the modern one, the geochemical and mineralogical composition is different. Smectite was only found in the modern deposit; illite/mica occurs in the ancient deposit, along with Mg, K, and Na. The pollen signature and detrital minerals (kaolinite, quartz and anatase) found in both mangrove deposits show that during the Miocene, a humid tropical climate condition prevailed, similar to modern conditions.

Mineralogy of halloysites and their interaction with porphyrine

Czech Academy of Sciences Publication Activity Database

Vašutová, V.; Bezdička, Petr; Lang, Kamil; Hradil, David

2013-01-01

Roč. 57, č. 3 (2013), s. 243-250 ISSN 0862-5468 Institutional support: RVO:61388980 Keywords : organoclays * mineralogy * porphyrine * CEC Subject RIV: CA - Inorganic Chemistry Impact factor: 0.434, year: 2013

Features of deep cave sediments: their influence on fossil preservation

Directory of Open Access Journals (Sweden)

Cobo, R.

2003-08-01

Full Text Available We analyse how physical and chemical deep-cave sediment features preserve the morphological and geochemical characteristics of paleontological materials. Detrital sediment chemistry and clast size are fundamental because they provide a soft, impervious and plastic environment in which fossil remains are transported with minimal erosion. Sediment mineralogy provides a carbonate- and phosphate-buffered environment in which molecules of biological origin hydrolyze slower than in open-air environments or even at cave entrance sites. Because permafrost did not develop in the Iberian Peninsula (at least at the altitudes of inhabited caves, sediment desiccation never took place. In addition, sediment -pores were not aerated, which protected fossil remains from air (oxygen-linked weathering. The annual-temperature variation inside sediment was negligible, which contributed to amino acid racemization dating. Collagen amino acid and amino acid racemization analysis of cave bear and man samples from cave sediments dated from different Oxygen Isotope Stages (4": Sidrón, Amutxate, Troskaeta, El Toll, Coro Tracito, Ekain, Lezetxiki, La Pasada, Eirós; 5": Reguerillo and Arrikrutz; 6"-7": Sima de los Huesos demonstrate that important amounts of almost intact collagen still remain in teeth dentine. Fossil DNA search seems to be very promising.En este trabajo se analiza el papel que juegan las características físicas y químicas de los sedimentos de galerías profundas de cuevas en la preservación de los caracteres morfológicos y paleobiomoleculares del material paleontológico incluido en dichos sedimentos. Los aspectos geoquímicos y de tamaño de grano del sedimento son críticos: las características generan un medio blando, plástico e impermeable que permite el transporte -mecánico sin grave deterioro del material (en coladas de barro; las características químicas mineralogía del sediment* proporcionan un ambiente con tampón fosfatado

Mineralogy affects geoavailability, bioaccessibility and bioavailability of zinc

International Nuclear Information System (INIS)

Molina, Ramon M.; Schaider, Laurel A.; Donaghey, Thomas C.; Shine, James P.; Brain, Joseph D.

2013-01-01

We correlated mineralogical and particle characteristics of Zn-containing particles with Zn geoavailability, bioaccessibility, and bioavailability following gavage and intranasal (IN) administration in rats. We compared samples of Zn/Pb mine waste and five pulverized pure-phase Zn minerals ( 65 Zn. We assessed geoavailability using sequential extractions and bioaccessibility using in vitro extraction tests simulating various pH and biological conditions. Zn in vivo bioavailability and in vitro bioaccessibility decreased as follows: mine waste > hydrozincite > hemimorphite > zincite ≈ smithsonite >> sphalerite. We found significant correlations among geoavailability, bioaccessibility and bioavailability. In particular, Zn bioavailability post-gavage and post-IN was significantly correlated with bioaccessibility in simulated phagolysosomal fluid and gastric fluid. These data indicate that solid phase speciation influences biological uptake of Zn and that in vitro tests can be used to predict Zn bioavailability in exposure assessment and effective remediation design. Highlights: •Zinc particle mineralogy influences bioaccessibility and bioavailability. •Zn bioavailability via gavage was 1.2–1.6 times higher than via intranasal route. •Zn particle geoavailability correlates with bioaccessibility. •In vitro bioaccessibility tests can predict in vivo Zn bioavailability. •Metal speciation and geochemical alterations can impact Zn bioavailability. -- Zinc mineralogy influences in vitro bioaccessibility and in vivo bioavailability and in vitro extraction tests can be used to predict Zn bioavailability from particles

X-Ray Diffraction for In-Situ Mineralogical Analysis of Planetesimals.

Science.gov (United States)

Sarrazin, P.; Blake, D. F.; Dera, P.; Downs, R. T.; Taylor, J.

2017-12-01

X-ray diffraction (XRD) is a general purpose technique for definitive, quantitative mineralogical analysis. When combined with XRF data for sample chemistry, XRD analyses yield as complete a characterization as is possible by any spacecraft-capable techniques. The MSL CheMin instrument, the first XRD instrument flown in space, has been used to establish the quantitative mineralogy of the Mars global soil, to discover the first habitable environment on another planet, and to provide the first in-situ evidence of silicic volcanism on Mars. CheMin is now used to characterize the depositional and diagenetic environments associated with the mudstone sediments of lower strata of Mt. Sharp. Conventional powder XRD requires samples comprised of small grains presented in random orientations. In CheMin, sample cells are vibrated to cause loose powder to flow within the cell, driven by granular convection, which relaxes the requirement for fine grained samples. Nevertheless, CheMin still requires mechanisms to collect, crush, sieve and deliver samples before analysis. XTRA (Extraterrestrial Regolith Analyzer) is an evolution of CheMin intended to analyze fines in as-delivered surface regolith, without sample preparation. Fine-grained regolith coats the surfaces of most airless bodies in the solar system, and because this fraction is typically comminuted from the rocky regolith, it can often be used as a proxy for the surface as a whole. HXRD (Hybrid-XRD) is concept under development to analyze rocks or soils without sample preparation. Like in CheMin, the diffracted signal is collected with direct illumination CCD's. If the material is sufficiently fine-grained, a powder XRD pattern of the characteristic X-ray tube emission is obtained, similar to CheMin or XTRA. With coarse grained crystals, the white bremsstrahlung radiation of the tube is diffracted into Laue patterns. Unlike typical Laue applications, HXRD uses the CCD's capability to distinguish energy and analyze the

Mini-review: The Morphology, Mineralogy and Microbiology of Accumulated Iron Corrosion Products

Science.gov (United States)

2014-03-11

including the morphology, mineralogy , microbiology and the mecha- nisms for formation. Use of descriptive terms to denote specific iron corrosion product...RESPONSIBLE PERSON 19b. TELEPHONE NUMBER (Include area code) 11-03-2014 Journal Article Mini-review: the morphology, mineralogy and microbiology of...oxides/ hydroxides with a preponderance of α-FeOOH (goethite) and accumulation of metals. Bacteria, particularly iron-oxidizing and sulfatereducing

Sedimentary evolution of the Mesozoic continental redbeds using geochemical and mineralogical tools: the case of Upper Triassic to Lowermost Jurassic Monte di Gioiosa mudrocks (Sicily, southern Italy)

Science.gov (United States)

Perri, Francesco; Critelli, Salvatore; Mongelli, Giovanni; Cullers, Robert L.

2011-10-01

The continental redbeds from the Internal Domains of the central-western Mediterranean Chains have an important role in the palaeogeographic and palaeotectonic reconstructions of the Alpine circum-Mediterranean orogen evolution since these redbeds mark the Triassic-Jurassic rift-valley stage of Tethyan rifting. The composition and the sedimentary evolution of the Middle Triassic to Lowermost Jurassic continental redbeds of the San Marco d'Alunzio Unit (Peloritani Mountains, Southern Italy), based on mineralogical and chemical analyses, suggests that the studied mudrock sediments share common features with continental redbeds that constitute the Internal Domains of the Alpine Mediterranean Chains. Phyllosilicates are the main components in the mudrocks. The 10 Å-minerals (illite and micas), the I-S mixed layers, and kaolinite are the most abundant phyllosilicates. The amount of illitic layers in I-S mixed layers coupled with the illite crystallinity values (IC) are typical of high degree of diagenesis, corresponding to a lithostatic/tectonic loading of about 4-5 km. The mineralogical assemblage coupled with the A-CN-K plot suggest post-depositional K-enrichments. Palaeoweathering proxies (PIA and CIW) record intense weathering at the source area. Further, the studied sediments are affected by reworking and recycling processes and, as consequence, it is likely these proxies monitor cumulative effect of weathering. The climate in the early Jurassic favoured recycling and weathering occurred under hot, episodically humid climate with a prolonged dry season. The source-area is the low-grade Paleozoic metasedimentary basement. Mafic supply is minor but not negligible as suggested by provenance proxies.

Clay Mineralogy of Brazilian Oxisols with Shrinkage Properties

Directory of Open Access Journals (Sweden)

Samara Alves Testoni

2017-08-01

Full Text Available ABSTRACT Shrinkage capacity (caráter retrátil in Portuguese is a new diagnostic characteristic recently introduced in the Brazilian System of Soil Classification (SiBCS to indicate shrink and swell properties observed in subtropical soils from highland plateaus in southern Brazil, specifically in Oxisols with brown colors. In soils located in road cuts exposed to drying for some weeks, strong shrinkage of soil volume is observed in these soils, resulting in the formation of pronounced vertical cracks and large and very large prismatic structures, which crumble in blocks when handled. We hypothesize that such properties are related to their clay mineralogy, although there are no conclusive studies about this, the motive for the present study. Samples of the A and B horizons from six Oxisols with expansive capacity from the states of Santa Catarina and Rio Grande do Sul were analyzed. One Rhodic Hapludox, from the state of Paraná, without expansive capacity, was used for comparison. All the soils are very clayey, originated from basalt, and have similar iron oxide content. For identification of clay mineralogy, X-ray diffraction techniques were employed, together with the use of NEWMOD® software to investigate and describe the interstratified minerals. The results showed that most expansive soils have a similar mineralogical composition, with kaolinite, interstratified kaolinite-smectite (K-S, and hydroxy-Al interlayered smectites (HIS, unlike the non-expansive Rhodic Hapludox, which exhibited kaolinite with significant amounts of gibbsite and low amount of interstratified K-S. According to the mineralogical assemblage identified in the expansive soils, we can affirm that the mechanism of smectite expansion and contraction is related to the shrinkage capacity of the soil, considering that the level of hydroxy-Al intercalation is low. In addition, these mechanisms also are related to the presence of quasicrystals and domains that control the

Fluvial fingerprints in northeast Pacific sediments: Unravelling terrestrial-ocean climate linkages

Science.gov (United States)

Vanlaningham, S. J.; Duncan, R.; Pisias, N.

2004-12-01

As the earth's climate history becomes better understood, it becomes clear that the terrestrial and oceanic systems interact in complex ways. This is seen in core sites offshore the Pacific Northwest (PNW) of North America. A correlation can be seen in oceanic biostratigraphic assemblages and down-core changes in terrestrial pollen types. However, it is difficult to determine whether this relationship is the result of a coupled migration of terrestrial vegetation and oceanic fauna on millennial timescales or the result of changes in ocean circulation patterns that create more complex pollen pathways to the core sites. This research begins to unravel the answers to this problem by examining down-core changes in sediment provenance on millennial timescales. Preliminary data characterize sediment of 24 rivers from ten geologic provinces between latitudes 36° N - 47° N. Through clay mineralogy, major and trace element geochemistry and Ar-Ar "province" ages, ten of the 24 rivers can be uniquely identified, while six of the ten geologic provinces can be uniquely constrained geochemically. With further Nd, Sr and Pb isotopic analyses, we hope to constrain the non-unique sediment sources. We will also be presenting initial down-core geochemical results from cores EW 9504-17PC and EW9504-13PC, offshore southern Oregon and central California, respectively.

Past surface conditions and speleogenesis as inferred from cave sediments in the Great Cave of Șălitrari Mountain (SW Romania

Directory of Open Access Journals (Sweden)

Cristina M. Pușcaș

2010-08-01

Full Text Available Abstract In one of the passages in the Great Cave of Șălitrari Mountain the floor is completely covered by an alluvial deposit at least 6 m in thickness, ranging from boulders, and cobbles, to sand and clay, topped by a layer of dry bat guano. Sediment and mineral samples collected from six profiles underwent broad analyses to determine their petrological and mineralogical makeup, grain-size distribution, and paleoclimatic significance. The complicated facies alternation suggests frequent changes in the former stream’s hydrological parameters, with frequent flooding, leading to the hypothesis that the climate was somewhat wetter than today. Both the mineralogical composition of the sediment (ranging from quartz, mica, gypsum, phosphates, and calcite to garnet, zircon, titanite, olivine, serpentine, tourmaline, sphalerite, pyrite/chalcopyrite, and feldspars and the petrological composition of the larger clasts (limestone, sandstone, mudstone, granitoids, serpentinite, amphibolite, diorite, gneiss, quartzite, microconglomerate, and schist ascribe the potential source rocks to an area with contrasting lithologies, such as amphibolites, felsic and basic metaigneous, and metasedimentary rocks, mixed with a variety of detritic rocks. These rock types are not entirely comprised by the catchment area of the modern Presacina Brook, thus implying that due either to hydrological conditions, or to changes in the base level caused by river down cutting or active tectonics, the former source area was much more extensive. Based on morphological and sedimentological criteria, the cave started under pipe-full flow conditions, and further evolved during a prolonged and complex vadose phase. Evidence to support the existence of hypogene conditions is also present. Once the underground stream left the cave and most of the sediment was removed, speleothem precipitation was initiated. In this contribution we put forward evidence that argue for an extra

Uranium-series comminution ages of continental sediments: Case study of a Pleistocene alluvial fan

Energy Technology Data Exchange (ETDEWEB)

Lee, Victoria E.; DePaolo, Donald J.; Christensen, John N.

2010-04-30

Obtaining quantitative information about the timescales associated with sediment transport, storage, and deposition in continental settings is important but challenging. The uranium-series comminution age method potentially provides a universal approach for direct dating of Quaternary detrital sediments, and can also provide estimates of the sediment transport and storage timescales. (The word"comminution" means"to reduce to powder," reflecting the start of the comminution age clock as reduction of lithic parent material below a critical grain size threshold of ~;;50 mu m.) To test the comminution age method as a means to date continental sediments, we applied the method to drill-core samples of the glacially-derived Kings River Fan alluvial deposits in central California. Sediments from the 45 m core have independently-estimated depositional ages of up to ~;;800 ka, based on paleomagnetism and correlations to nearby dated sediments. We characterized sequentially-leached core samples (both bulk sediment and grain size separates) for U, Nd, and Sr isotopes, grain size, surface texture, and mineralogy. In accordance with the comminution age model, where 234U is partially lost from small sediment grains due to alpha recoil, we found that (234U/238U) activity ratios generally decrease with age, depth, and specific surface area, with depletions of up to 9percent relative to radioactive equilibrium. The resulting calculated comminution ages are reasonable, although they do not exactly match age estimates from previous studies and also depend on assumptions about 234U loss rates. The results indicate that the method may be a significant addition to the sparse set of available tools for dating detrital continental sediments, following further refinement. Improving the accuracy of the method requires more advanced models or measurements for both the recoil loss factor fa and weathering effects. We discuss several independent methods for obtaining fa on individual samples

Technical characterization by image analysis: an automatic method of mineralogical studies

International Nuclear Information System (INIS)

Oliveira, J.F. de

1988-01-01

The application of a modern method of image analysis fully automated for the study of grain size distribution modal assays, degree of liberation and mineralogical associations is discussed. The image analyser is interfaced with a scanning electron microscope and an energy dispersive X-rays analyser. The image generated by backscattered electrons is analysed automatically and the system has been used in accessment studies of applied mineralogy as well as in process control in the mining industry. (author) [pt

Chemical and mineralogical characterization and ceramic suitability ...

African Journals Online (AJOL)

The chemical and mineralogical characterization of raw feldspathic materials from Dschang (Cameroon) was realized by means of X-ray diffraction, differential thermal analyses, optical and scanning electron microscopies, and analytical techniques. It was found that these materials consist of albite (43 ± 3 wt.%), microcline ...

Linking carbon and iron cycles by investigating transport, fate and mineralogy of iron-bearing colloids from peat-draining rivers - Scotland as model for high-latitude rivers

Science.gov (United States)

Wood, Deborah; Crocket, Kirsty; Brand, Tim; Stutter, Marc; Wilson, Clare; Schröder, Christian

2016-04-01

Linking carbon and iron cycles by investigating transport, fate and mineralogy of iron-bearing colloids from peat-draining rivers - Scotland as model for high-latitude rivers Wood, D.A¹, Crocket, K², Brand, T², Stutter, M³, Wilson, C¹ & Schröder, C¹ ¹Biological and Environmental Sciences, University of Stirling, Stirling, FK9 4LA ²Scottish Association for Marine Science, University of the Highlands and Islands, Dunbeg, Oban, PA37 1QA ³James Hutton Institute, Craigiebuckler, Aberdeen, AB15 8QH The biogeochemical iron cycle exerts significant control on the carbon cycle¹. Iron is a limiting nutrient in large areas of the world's oceans and its bioavailability controls CO2 uptake by marine photosynthesizing microorganisms. While atmospheric iron inputs to the open ocean have been extensively measured, global river inputs have likely been underestimated because most major world rivers exhibit extensive iron removal by flocculation and sedimentation during seawater mixing. Iron minerals and organic matter mutually stabilise each other², which results in a 'rusty carbon sink' in sediments³ on the one hand but may also enhance transport beyond the salinity gradient on the other. Humic-rich, high latitude rivers have a higher iron-carrying capacity⁴-⁶ but are underrepresented in iron flux calculations. The West Coast sea lochs in Scotland are fed by predominantly peatland drainage catchments, and the rivers entering the sea lochs carry a high load of organic matter. The short distance between many of these catchments and the coastal ocean facilitates source-to-sea research investigating transport, fate and mineralogy of iron-bearing colloids providing a good analogue for similar high latitude fjordic systems. We use SeaFAST+ICP-MS and Mössbauer spectroscopy to survey trace metal concentrations, with emphasis on iron concentrations, speciation and mineralogy, across salinity gradients. In combination with ultra-filtration techniques, this allows

Composition, diagenetic transformation and alkalinity potential of oil shale ash sediments

International Nuclear Information System (INIS)

Motlep, Riho; Sild, Terje; Puura, Erik; Kirsimaee, Kalle

2010-01-01

Oil shale is a primary fuel in the Estonian energy sector. After combustion 45-48% of the oil shale is left over as ash, producing about 5-7 Mt of ash, which is deposited on ash plateaus annually almost without any reuse. This study focuses on oil shale ash plateau sediment mineralogy, its hydration and diagenetic transformations, a study that has not been addressed. Oil shale ash wastes are considered as the biggest pollution sources in Estonia and thus determining the composition and properties of oil shale ash sediment are important to assess its environmental implications and also its possible reusability. A study of fresh ash and drillcore samples from ash plateau sediment was conducted by X-ray diffractometry and scanning electron microscopy. The oil shale is highly calcareous, and the ash that remains after combustion is derived from the decomposition of carbonate minerals. It is rich in lime and anhydrite that are unstable phases under hydrous conditions. These processes and the diagenetic alteration of other phases determine the composition of the plateau sediment. Dominant phases in the ash are hydration and associated transformation products: calcite, ettringite, portlandite and hydrocalumite. The prevailing mineral phases (portlandite, ettringite) cause highly alkaline leachates, pH 12-13. Neutralization of these leachates under natural conditions, by rainwater leaching/neutralization and slow transformation (e.g. carbonation) of the aforementioned unstable phases into more stable forms, takes, at best, hundreds or even hundreds of thousands of years.

Composition, diagenetic transformation and alkalinity potential of oil shale ash sediments

Energy Technology Data Exchange (ETDEWEB)

Motlep, Riho, E-mail: riho.motlep@ut.ee [Department of Geology, University of Tartu, Ravila 14A, 50411 Tartu (Estonia); Sild, Terje, E-mail: terje.sild@maaamet.ee [Estonian Land Board, Mustamaee tee 51, 10621 Tallinn (Estonia); Puura, Erik, E-mail: erik.puura@ut.ee [Institute of Technology, University of Tartu, Nooruse 1, 50411 Tartu (Estonia); Kirsimaee, Kalle, E-mail: kalle.kirsimae@ut.ee [Department of Geology, University of Tartu, Ravila 14A, 50411 Tartu (Estonia)

2010-12-15

Oil shale is a primary fuel in the Estonian energy sector. After combustion 45-48% of the oil shale is left over as ash, producing about 5-7 Mt of ash, which is deposited on ash plateaus annually almost without any reuse. This study focuses on oil shale ash plateau sediment mineralogy, its hydration and diagenetic transformations, a study that has not been addressed. Oil shale ash wastes are considered as the biggest pollution sources in Estonia and thus determining the composition and properties of oil shale ash sediment are important to assess its environmental implications and also its possible reusability. A study of fresh ash and drillcore samples from ash plateau sediment was conducted by X-ray diffractometry and scanning electron microscopy. The oil shale is highly calcareous, and the ash that remains after combustion is derived from the decomposition of carbonate minerals. It is rich in lime and anhydrite that are unstable phases under hydrous conditions. These processes and the diagenetic alteration of other phases determine the composition of the plateau sediment. Dominant phases in the ash are hydration and associated transformation products: calcite, ettringite, portlandite and hydrocalumite. The prevailing mineral phases (portlandite, ettringite) cause highly alkaline leachates, pH 12-13. Neutralization of these leachates under natural conditions, by rainwater leaching/neutralization and slow transformation (e.g. carbonation) of the aforementioned unstable phases into more stable forms, takes, at best, hundreds or even hundreds of thousands of years.

Dating of the Francevillian sedimentary series and mineralogic and isotopic (Sm, Nd, Rb, Sr, K, Ar, U, O and C) characterization of the gangue of the reactors 10 and 13. Preliminary report

International Nuclear Information System (INIS)

Gautier-Lafaye, F.; Stille, P.; Bros, R.; Taieb, R.

1993-01-01

This paper summarizes the various ages reported for the diagenetic events in the Francevillian sedimentary series (Precambrian era) and the fission reactors of Oklo. Obviously, differences exist between the ages obtained on the silicate minerals and the ages obtained on the Uranium ores and on the reactors. Clay minerals which crystallized during the fission reactions yield younger ages than the reactors themselves. Similarly, the diagenetic clays (1870 Ma) show younger ages than the Uranium ores (2000 Ma). This is in contrast to mineralogical and field evidence indicating that Uranium mineralization occurred during diagenesis of the Francevillian sediments. These antithetical results give rise to several questions. Does the age obtained on the diagenetic clays date a late thermal event or does the age of the Uranium mineralization reflect a multistage U-Pb history. This work tries to bring answers with the help of new isotopic analysis and studies mineralogy of the gangue of reactors and isotopic compositions in Uranium ores. 8 refs., 4 figs

Contribución de la mineralogía de arcillas a la interpretación de la evolución paleogeografica del sector occidental de la Cuenca del Guadalquivir

Directory of Open Access Journals (Sweden)

González, I.

1993-12-01

Full Text Available Marine tertiary materials of the Guadalquivir basin consist of four mayor depositional sequences of great continuity in the whole basin which are separate by unconformities. The lower outcroping unit (unit 2 ineludes glauconite-rich sandstones and marly limestones (Fm. Calcarenitas de Niebla, Tortonian-Messinian and Olisthostromic materials. This unit lies discordantly over the Paleozoic, and was sedimented in a shaUow marine platform. Olisthostromic materials (Mesozoic and Miocene, composed of sand and elayey sand, were deposited during Tortonian-Messinian times. As a consequence of a transgressive pulse, the sedimentation of a thick marly series (Fm. Arcillas de Gibraleón ofthe Messinian-Low Pliocene age took place. In the last stages of the filling of the basin (Pliocene a regression began, and sands and silts were deposited (Fm. Arenas de Huelva and Fm. Arenas de Bonares. Also, and as a final consequence of the regression stage, lacustrine sedimentary deposits (Upper Pliocene occur at the south of the basin, which are composed of marly limestone and greenish palygorskite and sepiolite marls. From a mineralogical point of view, autochthonous materials from this marine detritalcarbonate series, are mainly composed of calcite, quartz and phyUosilicates with minor dolomite and feldspars, and secondary gypsum. The elay minerals present are illite and smectite with minor kaolinite and chlorite. The evolution of the elay minerals associations varies from bottom to top as foUows: Illite or Clauconite >> Smectite > Chlorite/Kaolinite (Fm. Calcarenitas de Niebla; Smectite ≥ Illite > Kaolinite (Lower Fm. Arcillas de Gibraleón; Illite > Smectite ≥ Kaolinite/Chlorite (Upper Fm. Arcillas de Gibraleón, and Smectite > Illite > Kaolinite (Fm. Arenas de Huelva y Fm. Arenas de Bonares. This vertical variation confirms a stratigraphical discontinuity (paraconformity into the Fm. Arcillas de Gibraleón, which was observed by others from

Efeitos das variações sazonais do clima tropical úmido sobre as águas e sedimentos de manguezais do estuário do rio Marapanim, costa nordeste do Estado do Pará Effects of seasonal variations' on the mangroves' waters and sediments of the Marapanim estuary, northeast coast of Para State

Directory of Open Access Journals (Sweden)

José Francisco Berrêdo

2008-01-01

a mineralogia e as características químicas e físico-químicas das águas intersticiais.To evaluate the short period climatic variations impact over Amazonic mangrove ecosystem, studies were carried out on the northeast coast of Para State. Sediments, surficial and interstitial waters were collected and examinated throughout salinity, pH and Eh (mV measurements; mineralogical determination using X-ray diffraction and electronic microscopy. Chemical analysis of dissolved sulfides, sulfate and chloride, among others were made in samples collected seasonally, under spring and neap tides conditions. The seasonal chloride variations in the interstitial waters shows 20 g/l during the dry season and less of 10 g/l in the season; the concentration in surficial are higher at neap tides (rainy season and spring tide (dry season. The dissolved sulfides were found only at 10 cm, indicating sediment exposure to the atmospheric oxygen advectives fluxes. The dissolved iron rates increases between 0-10 cm and the pH tends to neutrality. The saturation of interstitial waters at dry season is indicated by evaporitic minerals: gypsum and halite. The pluviometric variations are responsible by gradual changes in the nutrient and physical chemical properties of surficial and interstitial waters, into the saline equilibrium control at coastal waters, in the salinization and desalinization of sediments and the distribution of mangrove vegetation at the estuary. The prolonged exposure of sediments during the dry season and the morphological characteristics contribute to the total or partial oxidation of surficial sediments, modifying the mineralogy of sediments and the physical chemical characteristics of interstitial waters.

chemical and mineralogical characterization of lateritic iron ore

African Journals Online (AJOL)

DJFLEX

2010-04-22

Apr 22, 2010 ... The laterite iron ore deposit at Auchi, Edo State, Nigeria was studied chemically and mineralogically. The results of the chemical ... SAMPLE PREPARATION. The samples .... 2µm) and were subjected to X-ray diffraction using.

Lithological and Mineralogical Characteristics and Forming Conditions of the Jurassic Sediments on the West Siberian Basin

Directory of Open Access Journals (Sweden)

R.R. Khaziev

2017-11-01

Full Text Available In the present work, lithological and mineralogical features, granulometric composition, as well as reservoir properties of the formation YuV1-1 of the Ety-Purovsky oil field are considered. It is established that the main rock-forming minerals of the reservoir – quartz, potassium feldspar and mica, also fragments of rocks, including carbonate rocks, are also found. Sandstone is diagnosed as carbonate greywack by the examined thin sections. According to the granulometry data, the formation is characterized as fine-grained sandstone with a dominant fraction of grains of 0.1-0.25 mm (47% of the total mass. According to the petrogenetic Passega diagram it was established that the formation was formed under the conditions of the gradation suspension generated in the lower parts of the fast river streams, directly at the bottom, which agrees with the literature data. Moreover, according to design factors (So, Q3, Q1, it is established that the formation is characterized by a poor degree of sorting of the sand material, as well as low roundness of grains and deteriorated reservoir properties, measured in laboratory conditions. It follows from the analysis that the reservoir is characterized by low productivity, and its development requires the use of hydraulic fracturing at an early stage of development.

A national-scale geochemical and mineralogical survey of soils of the conterminous United States

International Nuclear Information System (INIS)

Smith, David B.; Cannon, William F.; Woodruff, Laurel G.

2011-01-01

Highlights: → Sampling for national-scale soil geochemical and mineralogical survey completed for conterminous USA. → Natural variation for most elements is approximately three orders of magnitude. → Composition of soil parent material is the major controlling factor. → Climate (average annual precipitation) is also an important controlling factor for some elements. → Sample archive (4800 sites) available for future investigations. - Abstract: In 2007, the US Geological Survey initiated a low-density (1 site per 1600 km 2 , c. 4800 sites) geochemical and mineralogical survey of soils of the conterminous USA. The ideal sampling protocol at each site includes a sample from 0-5 cm depth, a composite of the soil A horizon, and a sample from the soil C horizon. The 3 , HClO 4 and HF. Separate methods are used for As, Hg, Se and total C on this same size fraction. The major mineralogical components are determined by a quantitative X-ray diffraction method. Sampling was completed in 2010 with chemical and mineralogical analysis currently underway. Preliminary results for a swath from the central USA to Florida clearly show the effects of soil parent material and climate on the chemical and mineralogical composition of soils. A sample archive will be established and made available for future investigations.

Bioavailability of metals in soils and sedimentes affected by old mining actitvities. The study case of the Portman bay (SE, Spain)

Science.gov (United States)

Martinez-Sanchez, Maria Jose; Agudo, Ines; Banegas, Ascension; Garcia-Lorenzo, Maria Luz; Gonzalez-Ciudad, Eva; Perez-Espinosa, Victor; Martinez-Lopez, Salvadora; Martinez, Lucia; Perz-Sirvent, Carmen

2010-05-01

A study on metal (Zn, Pb, Cd, Cu and As) mobilization and analysis of the health risk represented by ingestion from contaminated sediments in Portman Bay (SE Spain) was carried out. This zone has suffered a great impact from mining activity, since million tons of mine tailings were dumped into the bay for a long period, giving as a result the filling of the bay with them. The long-term deposition of metals in soils and sediments can lead to their accumulation and transport, while their toxicity depends on the mobility and bioavailability of a significant fraction of the metals. The ingestion of contaminated soil particles by grazing animals or young children may well represent a special exposure pathway for Pb, Cd and other hazardous metals. The aim of this study was to determine the bioaccessibility of Zn, Pb, Cd, Cu and As ,and the extent to which bioaccessibility is influenced by mineralogy in materials from this mining site as an indicator of the potential risk that metals pose to both environmental and human health. General analytical determinations (pH, particle size, organic matter, equivalent calcium carbonate content and mineralogical composition) were carried out to characterize the samples. The mineralogical composition was studied by X-ray diffraction (XRD), using a Philips PW3040 diffractometer with Cu-Kα. To determine the total metal content, the samples were digested in a Milestone ETHOS PLUS microwave, Zn, Pb, Cu and Cd contents were determined by electrothermal atomization atomic absorption spectrometry, while As was analysed by HG- AFS using an automated continuous flow hydride generation spectrometer. To assess bioaccessibility, the gastric solution was prepared according to the Standard Operating Procedure (SOP) developed by the Solubility/Bioavailability Research Consortium (SBRC). The mineralogical composition, corresponds to materials which have suffered a supergenic oxidation process which has been influenced by the presence of sea water

Clay mineralogy and source-to-sink transport processes of Changjiang River sediments in the estuarine and inner shelf areas of the East China Sea

Science.gov (United States)

Zhao, Yifei; Zou, Xinqing; Gao, Jianhua; Wang, Chenglong; Li, Yali; Yao, Yulong; Zhao, Wancang; Xu, Min

2018-02-01

We examined the source-to-sink sediment transport processes from the Changjiang River to the estuarine coastal shelf area by analyzing the clay mineral assemblages in suspended sediment samples from the Changjiang River catchment and surface samples from the estuarine coastal shelf area following the impoundment of the Three Gorges Dam (TGD) in 2003. The results indicate that the clay mineral compositions throughout the study area are dominated by illite, with less abundant kaolinite and chlorite and scarce smectite. The clay minerals display distinct differences in the tributaries and exhibit obvious changes in the trunk stream compared with the periods before 2003, and the source of sediment has largely shifted to the mid- to lower reaches of the river after 2003. Spatially, the clay mineral assemblages in the estuarine area define two compositionally distinct provinces. Province I covers the mud area of the Changjiang River estuary and the Zhe-Min coastal region, where sediment is primarily supplied by the Changjiang River. Province II includes part of the Changjiang River estuary and the southeastern portion of the study area, where the sediment is composed of terrestrial material from the Changjiang River and re-suspended material from the Huanghe River carried by the Jiangsu coastal current. Moreover, the other smaller rivers in China (including the Oujiang and Minjiang rivers of mainland China and the rivers of West Taiwan) also contribut sediments to the estuarine and inner shelf areas. In general, the clay mineral assemblages in the Changjiang River estuarine area are have mainly been controlled by sediment supplied from upstream of the Changjiang River tributaries. However, since the completion of the TGD in 2003, the mid- to downstream tributaries have become the main source of sediments from the Changjiang catchment into the East China Sea. These analyses further demonstrate that the coastal currents and the decrease in the sediment load of the river

Skeletal mineralogy of coral recruits under high temperature and pCO2

Science.gov (United States)

Foster, T.; Clode, P. L.

2016-03-01

Aragonite, which is the polymorph of CaCO3 precipitated by modern corals during skeletal formation, has a higher solubility than the more stable polymorph calcite. This higher solubility may leave animals that produce aragonitic skeletons more vulnerable to anthropogenic ocean acidification. It is therefore important to determine whether scleractinian corals have the plasticity to adapt and produce calcite in their skeletons in response to changing environmental conditions. Both high pCO2 and lower Mg / Ca ratios in seawater are thought to have driven changes in the skeletal mineralogy of major marine calcifiers in the past ˜ 540 Ma. Experimentally reduced Mg / Ca ratios in ambient seawater have been shown to induce some calcite precipitation in both adult and newly settled modern corals; however, the impact of high pCO2 on the mineralogy of recruits is unknown. Here we determined the skeletal mineralogy of 1-month-old Acropora spicifera coral recruits grown under high temperature (+3 °C) and pCO2 (˜ 900 µatm) conditions, using X-ray diffraction and Raman spectroscopy. We found that newly settled coral recruits produced entirely aragonitic skeletons regardless of the treatment. Our results show that elevated pCO2 alone is unlikely to drive changes in the skeletal mineralogy of young corals. Not having an ability to switch from aragonite to calcite precipitation may leave corals and ultimately coral reef ecosystems more susceptible to predicted ocean acidification. An important area for prospective research would be the investigation of the combined impact of high pCO2 and reduced Mg / Ca ratio on coral skeletal mineralogy.

Effects of vegetation on chemical and mineralogical characteristics of soils developed on a decantation bank from a copper mine.

Science.gov (United States)

Cerqueira, Beatriz; Vega, Flora A; Silva, Luis F O; Andrade, Luisa

2012-04-01

Open cast mining has a strong impact on the environment, the intensity depending on the morphology of the deposit and on the nature of the minerals. At Touro mine (NW Spain) there is a large area covered by tailings, one of which, called the "sedimentation bank", was used to deposit sludge resulting from the extraction of copper in the flotation plant. Three zones were selected and the soils were sampled to analyse the changes brought about by vegetation on the chemical and mineralogical properties of the soils developed over the sedimentation bank and its development over time. The vegetation increased the pH, contents of organic material, nitrogen, clay and free oxides of Fe and Al, and the cationic exchange capacity of the soils. The decrease in the sulphide content, benefited by the vegetation process, led to a reduction in the total content of Cr and Cu. The vegetation also contributed towards the alteration of the primary minerals. The transformation of jarosite, the formation of nanocrystals of hematite, goethite, hydroxypolymers, and amorphous minerals that contained Cu, Cr and Pb were observed. Nevertheless the high Cu and Cr contents indicate that it is advisable to change the restoration process. Copyright © 2012 Elsevier B.V. All rights reserved.

Pedological and mineralogical investigations on a soil-paleosoil sequence within Andosols in the Western Cordillera of the Peruvian Andes (region Laramate, 14.5S)

Science.gov (United States)

Leceta Gobitz, Fernando; Mächtle, Bertil; Schukraft, Gerd; Meyer, Hans-Peter; Eitel, Bernhard

2016-04-01

An integrated research project of environmental sciences focuses on a group of four Andosol profiles in Western flank of the Peruvian southern Andes. Aim of this study is to contribute to the reconstruction of the paleo environmental conditions in the Western Cordillera of the Peruvian Andes. Standard pedological and sedimentological analysis has been conducted in order to identify morphological and geochemical features generated by climatic variations during the middle and late Holocene. Though a provenance analysis of sediments, all potential lithological sources around the town of Laramate are being examined under the scanning electron microscope, in order to find significant mineralogical associations downward the soil-profile. Preliminary results reveal two edaphic cycles within a soil-paleo soil-sequence: a relative poor developed "Ah" topsoil, mostly composed by fine grain sediments, is underlain by a well preserved "2Ah" paleo soil; a "2Bwt" subsoil exhibits signs of alteration and clay translocation; parent material in slight weathered statement at "2C" culminates the sequence. Mineralogical analytical data supports the premise, that materials in the uppermost horizons are relatable to distal geological units of the Western and Eastern Cordillera, therefore also related to other described aeolian archives from the region: "Desert Margin Loess" at the Andean foot-zone and "Mixed Loess" in the Puna grassland. The amphibole varieties Actinolite, Mg-Hornblende and Edenite could be only distinguished within the soil sediments. The fluvial transport to its current position is excluded, insofar mentioned varieties stem from the granodiorites of Coastal Batholite (downstream the study area), and the vulcanites of the Anta und Andahuaylas Formation (eastward the continental divide). References: Eitel, B., et al. (2005). "Geoarchaeological evidence from desert loess in the Nazca-Palpa region, southern Peru : Palaeoenvironmental changes and their impact on Pre

Mineralogic Model (MM3.0) Analysis Model Report

Energy Technology Data Exchange (ETDEWEB)

C. Lum

2002-02-12

The purpose of this report is to document the Mineralogic Model (MM), Version 3.0 (MM3.0) with regard to data input, modeling methods, assumptions, uncertainties, limitations and validation of the model results, qualification status of the model, and the differences between Version 3.0 and previous versions. A three-dimensional (3-D) Mineralogic Model was developed for Yucca Mountain to support the analyses of hydrologic properties, radionuclide transport, mineral health hazards, repository performance, and repository design. Version 3.0 of the MM was developed from mineralogic data obtained from borehole samples. It consists of matrix mineral abundances as a function of x (easting), y (northing), and z (elevation), referenced to the stratigraphic framework defined in Version 3.1 of the Geologic Framework Model (GFM). The MM was developed specifically for incorporation into the 3-D Integrated Site Model (ISM). The MM enables project personnel to obtain calculated mineral abundances at any position, within any region, or within any stratigraphic unit in the model area. The significance of the MM for key aspects of site characterization and performance assessment is explained in the following subsections. This work was conducted in accordance with the Development Plan for the MM (CRWMS M&O 2000). The planning document for this Rev. 00, ICN 02 of this AMR is Technical Work Plan, TWP-NBS-GS-000003, Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01 (CRWMS M&O 2000). The purpose of this ICN is to record changes in the classification of input status by the resolution of the use of TBV software and data in this report. Constraints and limitations of the MM are discussed in the appropriate sections that follow. The MM is one component of the ISM, which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components: (1

Mineralogic Model (MM3.0) Analysis Model Report

International Nuclear Information System (INIS)

Lum, C.

2002-01-01

The purpose of this report is to document the Mineralogic Model (MM), Version 3.0 (MM3.0) with regard to data input, modeling methods, assumptions, uncertainties, limitations and validation of the model results, qualification status of the model, and the differences between Version 3.0 and previous versions. A three-dimensional (3-D) Mineralogic Model was developed for Yucca Mountain to support the analyses of hydrologic properties, radionuclide transport, mineral health hazards, repository performance, and repository design. Version 3.0 of the MM was developed from mineralogic data obtained from borehole samples. It consists of matrix mineral abundances as a function of x (easting), y (northing), and z (elevation), referenced to the stratigraphic framework defined in Version 3.1 of the Geologic Framework Model (GFM). The MM was developed specifically for incorporation into the 3-D Integrated Site Model (ISM). The MM enables project personnel to obtain calculated mineral abundances at any position, within any region, or within any stratigraphic unit in the model area. The significance of the MM for key aspects of site characterization and performance assessment is explained in the following subsections. This work was conducted in accordance with the Development Plan for the MM (CRWMS M and O 2000). The planning document for this Rev. 00, ICN 02 of this AMR is Technical Work Plan, TWP-NBS-GS-000003, Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01 (CRWMS M and O 2000). The purpose of this ICN is to record changes in the classification of input status by the resolution of the use of TBV software and data in this report. Constraints and limitations of the MM are discussed in the appropriate sections that follow. The MM is one component of the ISM, which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components

MINERALOGIA E QUÍMICA DE SOLO DE VÁRZEA E SUAS SUSCEPTIBILIDADES NO PROCESSO DE TERRAS CAÍDAS NA COMUNIDADE DO DIVINO ESPÍRITO SANTO-AM / Mineralogy and chemistry of the lowland soil and its sensibilities in the process of lands falls in community Divino Espírito Santo (Amazonas, Brazil.

Directory of Open Access Journals (Sweden)

Regiane Campos Magalhães

2013-12-01

Full Text Available The study about the mineralogical and chemical lowland soils generate information to compose a current survey about the susceptibility of lowland soil to process Fallen Lands. With this purpose we studied five profiles the banks of the Solimões River, located in the municipality of Iranduba (AM. The information obtained allowed to determine the Neosoil Fluvic the study area has favorable conditions for cultivation with an average pH of 6.2, with high levels of Ca, Mg, K, P, micronutrients and zero Al content, with high levels of C and M. O. in the first layer and a decrease in depth. Thus, Neosoil Fluvic was characterized as Tb eutrophic, with base saturation above 50%, with good CTC. The mineralogy was homogeneous in all profiles, with a predominance of primary minerals: Quartz, Albite and rutile, with low proportions of clay minerals Muscovite, Kaolinite, Muscovite-Illite interstratified and Illite.

Martian Surface Mineralogy from Rovers with Spirit, Opportunity, and Curiosity

Science.gov (United States)

Morris, Richard V.

2016-01-01

Beginning in 2004, NASA has landed three well-instrumented rovers on the equatorial martian surface. The Spirit rover landed in Gusev crater in early January, 2004, and the Opportunity rover landed on the opposite side of Mars at Meridian Planum 21 days later. The Curiosity rover landed in Gale crater to the west of Gusev crater in August, 2012. Both Opportunity and Curiosity are currently operational. The twin rovers Spirit and Opportunity carried Mossbauer spectrometers to determine the oxidation state of iron and its mineralogical composition. The Curiosity rover has an X-ray diffraction instrument for identification and quantification of crystalline materials including clay minerals. Instrument suites on all three rovers are capable of distinguishing primary rock-forming minerals like olivine, pyroxene and magnetite and products of aqueous alteration in including amorphous iron oxides, hematite, goethite, sulfates, and clay minerals. The oxidation state of iron ranges from that typical for unweathered rocks and soils to nearly completely oxidized (weathered) rocks and soils as products of aqueous and acid-sulfate alteration. The in situ rover mineralogy also serves as ground-truth for orbital observations, and orbital mineralogical inferences are used for evaluating and planning rover exploration.

Mineralogical and geological study of quaternary deposits and weathering profiles

Energy Technology Data Exchange (ETDEWEB)

Jeong, Gi Young; Lee, Bong Ho [Andong National Univ., Andong (Korea, Republic of)

2004-01-15

Movement history of a quaternary reverse fault cutting marine terrace deposit and tertiary bentonite in the Yangnammyon, Gyoungju city was studied by the mineralogical and microtextural analysis of the fault clays and weathered terrace deposits. Two types of fault clays were identified as greenish gray before the deposition of the marine terrace deposits and reddish brown after deposition. Greenish gray fault clay is composed mostly of smectite probably powdered from bentonite showing at least two events of movement from microtextures. After the bentonite was covered by quaternary marine gravel deposits, the reverse fault was reactivated cutting marine gravel deposits to form open spaces along the fault plane which allowed the hydrological infiltration of soil particles and deposition of clays in deep subsurface. The reddish brown 'fault' clays enclosed the fragments of dark brown ultrafine varved clay, proving two events of faulting, and slicken sides bisecting reddish brown clays suggest another faulting event in the final stage. Mineralogical and microtextural analysis of the fault clay show total five events of faulting, which had not been recognized even by thorough conventional paleoseismological investigation using trench, highlighting the importance of microtextural and mineralogical analysis in paleoseismology.

Influence of iron redox transformations on plutonium sorption to sediments

Energy Technology Data Exchange (ETDEWEB)

Hixon, A.E.; Powell, B.A. [Environmental Engineering and Earth Sciences, Clemson Univ., Clemson, SC (United States); Hu, Y.J.; Nitsche, H. [Dept. of Chemistry, Univ. of California, Berkeley, CA (United States); Lawrence Berkeley National Lab., Berkeley, CA (United States); Kaplan, D.I. [Savannah River National Lab., Aiken, SC (United States); Kukkadapu, R.K.; Qafoku, O. [Pacific Northwest National Lab., Richland, WA (United States)

2010-07-01

(IV). Similar to the sorption kinetics, the reduction rate appears to be correlated with sediment Fe(II) concentration. The correlation between Fe(II) concentrations and Pu(V) reduction demonstrates the potential impact of changing iron mineralogy on plutonium subsurface transport through redox transition areas. These findings should influence the conceptual models of long-term stewardship of Pu contaminated sites that have fluctuating redox conditions, such as vadose zones or riparian zones. (orig.)

Mineralogical and geological study of fault rocks and associated strata

International Nuclear Information System (INIS)

Kim, Jeon Jin; Jeong, Gyo Cheol; Bae, Doo Won; Park, Seong Min; Kim, Jun Yeong

2007-01-01

Mineralogical characterizations of fault clay and associated strata in fault zone with field study and analytical methods. Mineral composition and color of fault clay and rock occur in fracture zone different from bed rocks. Fault clay mainly composed of smectite with minor zeolite such as laumontite and stilbite, and halloysite, illite, Illite and halloysite grow on the surface of smectite, and laumontite and stilbite result from precipitation or alteration of Ca rich bed rock. The result of mineralogical study at Ipsil, Wangsan, Gaegok, Yugyeori, Gacheon in Gyeongju area, the detail research of microstructure in the fault clay making it possible for prediction to age of fault activity

Mineralogical and geological study of fault rocks and associated strata

Energy Technology Data Exchange (ETDEWEB)

Kim, Jeon Jin; Jeong, Gyo Cheol; Bae, Doo Won; Park, Seong Min; Kim, Jun Yeong [Andong Univ., Andong (Korea, Republic of)

2007-01-15

Mineralogical characterizations of fault clay and associated strata in fault zone with field study and analytical methods. Mineral composition and color of fault clay and rock occur in fracture zone different from bed rocks. Fault clay mainly composed of smectite with minor zeolite such as laumontite and stilbite, and halloysite, illite, Illite and halloysite grow on the surface of smectite, and laumontite and stilbite result from precipitation or alteration of Ca rich bed rock. The result of mineralogical study at Ipsil, Wangsan, Gaegok, Yugyeori, Gacheon in Gyeongju area, the detail research of microstructure in the fault clay making it possible for prediction to age of fault activity.

Sedimentological, textural, mineralogical and geochemical study of surface sediments and suspension material in Baia da Ribeira, Angra dos Reis, RJ, Brazil

International Nuclear Information System (INIS)

Lima, Samuel do Carmo

1985-01-01

The geochemistry dispersion of the metals in aquatic environment is related to the physical chemistry proprieties of these elements as to their interaction by sorption on and desorption from solid particles. These interaction must be understood within the environmental dynamic, with its hydrological, sedimentological, chemical, physical and biological processes that may take the toxic elements (stables metals and radionuclides) to the bio alimentary chain. It was observed at the Ribeira Bay, its hydrodynamic behaviour through the suspension material and particulate organic carbon dispersion. And, through the textural, mineralogical and chemical parameters it was observed the behaviour of the geochemistry processes of the sedimentary materials and the influence that they may submit to the metals dispersion. (author)

Provenance and geological significance of red mud and other clastic sediments of the Mugnano cave (Montagnola Senese, Italy

Directory of Open Access Journals (Sweden)

Iacoviello Francesco

2012-07-01

Full Text Available The Mugnano cave is characterized by a thick clastic sedimentary fill showing a great variability of sedimentary facies, ranging from clay to coarse-grained sand deposits. This paper deals with combined sedimentological and mineralogical (XRD and SEM studies of these sediments and bedrock insoluble residues in order to understand the origin and geological significance of cave deposits, with particular attention to red mud sediments, often considered as the residue of host rock dissolution. Three different sedimentary facies were recognized: i YS, yellow sand with occasionally shell fragments, testifying the arrival of sediments from the surrounding landscape; ii RS, red laminated mud; iii GS, grey and red-grey mud and sand, dolomite-rich sediments. Furthermore, the results obtained in the present study allowed the identification of two fingerprint minerals: i quartz, present only as traces in the limestone host-rock, and ii dolomite, certainly related to the incomplete bedrock dissolution. Results obtained by this multidisciplinary approach testify that no one of the investigated sediments is representative of a completely autochthonous sedimentation (i.e. accumulation of insoluble residue of limestone in a cave environment. In fact, all the three sedimentary facies show a bulk composition rich in quartz, a mineral indicating an external origin for these sediments. Also the grey sediments, despite of their high content of bedrock- related dolomite, are quite rich in quartz and they testify the mixing of autochthonous and allocthonous sediments. The clay fraction of cave sediments shows strong compositional similarities with bedrock insoluble residue and consequently its analysis cannot be considered as a clear proxy for distinguishing between different parent materials. Therefore, the origin of these cave deposits is dominantly related to external sediments inputs, with terra rossa surface soils as the most probable parent material for red mud

Processing of copper converter slag for metals reclamation: Part II: mineralogical study.

Science.gov (United States)

Deng, Tong; Ling, Yunhan

2004-10-01

Chemical and mineralogical characterizations of a copper converter slag, and its products obtained by curing with strong sulphuric acid and leaching with hot water, were carried out using ore microscopy, scanning electronic microscopy with energy dispersive spectrometry, wave-length dispersive X-ray fluorescence spectrometry, X-ray diffractometry and chemical phase analysis, which provided necessary information to develop a new process for treating such slag and further understanding of the chemical and mineralogical changes in the process.

Skeletal mineralogy of coral recruits under high temperature and pCO2

Directory of Open Access Journals (Sweden)

T. Foster

2016-03-01

Our results show that elevated pCO2 alone is unlikely to drive changes in the skeletal mineralogy of young corals. Not having an ability to switch from aragonite to calcite precipitation may leave corals and ultimately coral reef ecosystems more susceptible to predicted ocean acidification. An important area for prospective research would be the investigation of the combined impact of high pCO2 and reduced Mg ∕ Ca ratio on coral skeletal mineralogy.

Characterization of sediments laid on Solimoes/Amazonas river flood plains, using energy dispersive X-ray fluorescence technique; Caracterizacao dos sedimentos depositados nas planicies de inundacao do Rio Solimoes/Amazonas, utilizando a tecnica de fluorescencia de raios-X por dispersao de energia

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Ana E.V. [Universidade Metodista de Piracicaba (UNIMEP), Sao Paulo, SP (Brazil); Nascimento Filho, Virgilio F. do [Sao Paulo Univ., Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz]|[Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)

1997-10-01

This paper proposes sediment analysis with high light elements fraction using dispersive energy X-ray fluorescence technique with radioisotopic excitation, The proposed procedure is based on the Fundamental Parameters for analytical elements (Z {>=} 13) evaluation, and coherent and incoherent scattered radiation for quantification of the light fraction of the matrix (Z < 13). Laid sediments samples on Solimoes/Amazonas river flood plains were analyzed, determining simultaneously the Al, Si, K, Ca, Ti, Fe, Sc, V, Mn, Cu, Zn, Rb, Sr and Zr element concentrations, thus allowing chemical characterization and spatial variability, and some mineralogical and weathering sediments aspects. (author). 15 refs., 11 tabs.

Mineralogia, química e estabilidade de agregados do tamanho de silte de solos da Região Sudeste do Brasil Mineralogy, chemistry and stability of silt-size aggregates of soils from the Southeast Region of Brazil

Directory of Open Access Journals (Sweden)

Antonio Carlos Tadeu Vitorino

2003-01-01

Full Text Available Com o objetivo de avaliar a relação da composição mineralógica e química do solo com a estabilidade de agregados do tamanho de silte, foram realizados estudos utilizando-se amostras de horizontes A e B de diversos solos da Região Sudeste do Brasil. Amostras de TFSA foram dispersas a 12.000 rpm por 20 minutos e a fração silte foi separada por esgotamento da fração argila, constituindo-se na fração denominada pseudo-silte, a qual foi sonificada, separando-se a fração argila desagregada (por sifonamento da fração silte propriamente dita. Estudos de correlação mostraram que as composições mineralógica e química dos solos têm efeito marcante na dispersão de argila, com reflexos na fração silte. Maiores teores de gibbsita refletem em maior estabilidade dos agregados do tamanho de silte ao passo que a caulinita proporciona efeito inverso. As formas de Al determinadas na fração pseudo-silte estão associadas à maior dificuldade de dispersão da fração argila dos solos.The objective of this work was to evaluate the relationship of soil mineralogical and chemical composition with stability of silt-size aggregates. The studies were carried out using samples of A and B horizons of some soils from the Southeast Region of Brazil. Fine-earth samples were dispersed at 12,000 rpm during 20 minutes and the silt fraction was separated through clay fraction drain, constituting the fraction named pseudo-silt, which was sonificated, separating the desegregated clay fraction (by sonication from the properly named silt fraction. Correlation analyses showed that the soil mineralogical and chemical compositions have marked influence upon clay dispersion, with reflections on the silt fraction. Higher amounts of gibbsite reflect in higher stability of silt-size aggregates, while the kaolinite promotes inverse effect. The Al forms determined on the pseudo-silt fraction are associated with higher difficult of dispersion of clay fraction of

Influence of clay mineralogy on clay based ceramic products

International Nuclear Information System (INIS)

Radzali Othman; Tuan Besar Tuan Sarif; Zainal Arifin Ahmad; Ahmad Fauzi Mohd Noor; Abu Bakar Aramjat

1996-01-01

Clay-based ceramic products can either be produced directly from a suitable clay source without the need further addition or such products can be produced from a ceramic body formulated by additions of other raw materials such as feldspar and silica sand. In either case, the mineralogical make-up of the clay component plays a dominating role in the fabrication and properties of the ceramic product. This study was sparked off by a peculiar result observed in one of five local ball clay samples that were used to reformulate a ceramic body. Initial characterisation tests conducted on the clays indicated that these clays can be classified as kaolinitic. However, one of these clays produced a ceramic body that is distinctively different in terms of whiteness, smoothness and density as compared to the other four clays. Careful re-examination of other characterisation data, such as particle size distribution and chemical analysis, failed to offer any plausible explanation. Consequently, the mineralogical analysis by x-ray diffraction was repeated by paying meticulous attention to specimen preparation. Diffraction data for the clay with anomalous behaviour indicated the presence of a ∼ 10A peak that diminished when the same specimen was re-tested after heating in an oven at 12O degree C whilst the other four clays only exhibit the characteristic kaolinite (Al sub 2 O sub 3. 2SiO sub 2. 2H sub 2 0) and muscovite peaks at ∼ 7A and ∼ 10A before and after heat treatment. This suggests the presence of the mineral halloysite (A1 sub 2 0 sub 3. 2SiO sub 2.4H sub 2 0) in that particular clay. This difference in mineralogy can be attributed to account for the variations in physical properties of the final product. Consequently, this paper reviews in general the precautionary measures that must be adhered to during any mineralogical investigation of clay minerals or clay-based materials. The common pitfalls during specimen preparation, machine settings and interpretation of

Arsenic mobility from anthropogenic impoundment sediments - Consequences of contamination to biota, water and sediments, Posa, Eastern Slovakia

Energy Technology Data Exchange (ETDEWEB)

Hiller, E.; Jurkovic, L.; Kordik, J.; Slaninka, I.; Jankular, M.; Majzlan, J.; Gottlicher, J.; Steininger, R. [Geological Survey of Slovak Republic, Bratislava (Slovakia). Dept. of Environmental Geochemistry

2009-11-15

An impoundment located near the village of Posa, Slovakia, is a significant source of contamination with As originating from the deposited coal fly-ash. Waters penetrating the impoundment are enriched in As and other potentially toxic elements. As a consequence of the contamination, the Kyjov Brook and the Ondava River have been extensively polluted. The mobility and solid-state partitioning of As in the impoundment material and stream sediments were investigated using column leaching and batch extraction tests, and a five-step sequential extraction procedure. Moreover, to investigate the bioavailability of As, two native plant species (Typha latifolia, or cattail, and Phragmites australis, or common reed) growing at the site were collected and analyzed. The As concentrations in representative sediment and water samples ranged from 36.3 to 3210 mg/kg and from 4.05 to 613 {mu} g/L, respectively, both being many times above the background levels. Although a part of As was present in a readily soluble form (6.6%), the majority of As was mainly associated with Fe and Mn oxides (37%) and residual phases (51%). Combined results of the column leaching, batch extraction, and sequential extraction tests, as well as mineralogical analysis, indicated that As mobilisation potential from the sediments is likely controlled by Fe, Al and Mn oxides, and by pH. There was no influence of various anions (PO{sub 4}{sup 3-}, SO{sub 4}{sup 2-}, NO{sup 3-}, Cl{sup -} and HCO{sub 3}{sup -}) on As mobility when present in aqueous solution at concentrations analogous to those in the water of the Kyjov Brook. Plants growing in the impoundment had As concentrations 10-100 times greater than did the same plants growing in a relatively non-polluted area.

Deposition of talc - kerolite-smectite - smectite at seafloor hydrothermal vent fields: Evidence from mineralogical, geochemical and oxygen isotope studies

Science.gov (United States)

Dekov, V.M.; Cuadros, J.; Shanks, Wayne C.; Koski, R.A.

2008-01-01

Talc, kerolite-smectite, smectite, chlorite-smectite and chlorite samples from sediments, chimneys and massive sulfides from six seafloor hydrothermal areas have been analyzed for mineralogy, chemistry and oxygen isotopes. Samples are from both peridotite- and basalt-hosted hydrothermal systems, and basaltic systems include sediment-free and sediment-covered sites. Mg-phyllosilicates at seafloor hydrothermal sites have previously been described as talc, stevensite or saponite. In contrast, new data show tri-octahedral Mg-phyllosilicates ranging from pure talc and Fe-rich talc, through kerolite-rich kerolite-smectite to smectite-rich kerolite-smectite and tri-octahedral smectite. The most common occurrence is mixed-layer kerolite-smectite, which shows an almost complete interstratification series with 5 to 85% smectitic layers. The smectite interstratified with kerolite is mostly tri-octahedral. The degree of crystal perfection of the clay sequence decreases generally from talc to kerolite-smectite with lower crystalline perfection as the proportion of smectite layers in kerolite-smectite increases. Our studies do not support any dependence of the precipitated minerals on the type/subtype of hydrothermal system. Oxygen isotope geothermometry demonstrates that talc and kerolite-smectite precipitated in chimneys, massive sulfide mounds, at the sediment surface and in open cracks in the sediment near seafloor are high-temperature (> 250????C) phases that are most probably the result of focused fluid discharge. The other end-member of this tri-octahedral Mg-phyllosilicate sequence, smectite, is a moderate-temperature (200-250????C) phase forming deep within the sediment (??? 0.8??m). Chlorite and chlorite-smectite, which constitute the alteration sediment matrix around the hydrothermal mounds, are lower-temperature (150-200????C) phases produced by diffuse fluid discharge through the sediment around the hydrothermal conduits. In addition to temperature, other two

Mineralogical Approaches to Sourcing Pipes and Figurines from the Eastern Woodlands, U.S.A.

Science.gov (United States)

Wisseman, S.U.; Moore, D.M.; Hughes, R.E.; Hynes, M.R.; Emerson, T.E.

2002-01-01

Provenance studies of stone artifacts often rely heavily upon chemical techniques such as neutron activation analysis. However, stone specimens with very similar chemical composition can have different mineralogies (distinctive crystalline structures as well as variations within the same mineral) that are not revealed by multielemental techniques. Because mineralogical techniques are often cheap and usually nondestructive, beginning with mineralogy allows the researcher to gain valuable information and then to be selective about how many samples are submitted for expensive and somewhat destructive chemical analysis, thus conserving both valuable samples and funds. Our University of Illinois team of archaeologists and geologists employs Portable Infrared Mineral Analyzer (PIMA) spectroscopy, X-ray diffraction (XRD), and Sequential acid dissolution/XRD/Inductively coupled plasma (SAD-XRD-ICP) analyses. Two case studies of Hopewellian pipes and Mississippian figurines illustrate this mineralogical approach. The results for both studies identify sources relatively close to the sites where the artifacts were recovered: Sterling, Illinois (rather than Ohio) for the (Hopewell) pipes and Missouri (rather than Arkansas or Oklahoma) for the Cahokia figurines. ?? 2002 Wiley Periodicals, Inc.

Paleomagnetism and environmental magnetism of GLAD800 sediment cores from Bear Lake, Utah and Idaho

Science.gov (United States)

Heil, C.W.; King, J.W.; Rosenbaum, J.G.; Reynolds, R.L.; Colman, Steven M.

2009-01-01

A ???220,000-year record recovered in a 120-m-long sediment core from Bear Lake, Utah and Idaho, provides an opportunity to reconstruct climate change in the Great Basin and compare it with global climate records. Paleomagnetic data exhibit a geomagnetic feature that possibly occurred during the Laschamp excursion (ca. 40 ka). Although the feature does not exhibit excursional behavior (???40?? departure from the expected value), it might provide an additional age constraint for the sequence. Temporal changes in salinity, which are likely related to changes in freshwater input (mainly through the Bear River) or evaporation, are indicated by variations in mineral magnetic properties. These changes are represented by intervals with preserved detrital Fe-oxide minerals and with varying degrees of diagenetic alteration, including sulfidization. On the basis of these changes, the Bear Lake sequence is divided into seven mineral magnetic zones. The differing magnetic mineralogies among these zones reflect changes in deposition, preservation, and formation of magnetic phases related to factors such as lake level, river input, and water chemistry. The occurrence of greigite and pyrite in the lake sediments corresponds to periods of higher salinity. Pyrite is most abundant in intervals of highest salinity, suggesting that the extent of sulfidization is limited by the availability of SO42-. During MIS 2 (zone II), Bear Lake transgressed to capture the Bear River, resulting in deposition of glacially derived hematite-rich detritus from the Uinta Mountains. Millennial-scale variations in the hematite content of Bear Lake sediments during the last glacial maximum (zone II) resemble Dansgaard-Oeschger (D-O) oscillations and Heinrich events (within dating uncertainties), suggesting that the influence of millennial-scale climate oscillations can extend beyond the North Atlantic and influence climate of the Great Basin. The magnetic mineralogy of zones IV-VII (MIS 5, 6, and 7

Příklad sedimentace v malých antropogenně ovlivněných tocích: petrografie a mineralogie jemnozrnných fluviálních sedimentů v prostoru Libeň-Klecany

Czech Academy of Sciences Publication Activity Database

Hlásková, T.; Lisá, Lenka

2006-01-01

Roč. 2005, č. 13 (2006), s. 6-8 ISSN 1212-6209 R&D Projects: GA AV ČR IAA300130505 Institutional research plan: CEZ:AV0Z30130516 Keywords : fluvial sediments * heavy minerals * environmental geology * minor stream * provenance Subject RIV: DB - Geology ; Mineralogy http://www.sci.muni.cz/gap/casop/

Diversions of the Ribeira river flow and their Influence on Sediment Supply in the Cananeia-Iguape Estuarine-Lagoonal System (SE Brazil)

Science.gov (United States)

Cornaggia, Flaminia; Jovane, Luigi; Alessandretti, Luciano; Alves de Lima Ferreira, Paulo; Lopes Figueira, Rubens C.; Rodelli, Daniel; Bueno Benedetti Berbel, Gláucia; Braga, Elisabete S.

2018-04-01

The Cananéia-Iguape system is a combined estuarine-lagoonal sedimentary system, located along the SE coast of Brazil. It consists of a network of channels and islands oriented mainly parallel to the coast. About 165 years ago, an artificial channel, the Valo Grande, was opened in the northern part of this system to connect a major river of the region, the Ribeira River, to the estuarine-lagoon complex. The Valo Grande was closed with a dam and re-opened twice between 1978 and 1995, when it was finally left open. These openings and closures of the Valo Grande had a significant influence on the Cananéia-Iguape system. In this study we present mineralogical, chemical, palaeomagnetic, and geochronological data from a sediment core collected at the southern end of the 50-km long lagoonal system showing how the phases of the opening and closure of the channel through time are expressed in the sedimentary record. Despite the homogeneity of the grain size and magnetic properties throughout the core, significant variations in the mineralogical composition showed the influence of the opening of the channel on the sediment supply. Less mature sediment, with lower quartz and halite and higher kaolinite, brucite, and franklinite, corresponded to periods when the Valo Grande was open. On the other hand, higher abundance of quartz and halite, as well as the disappearance of other detrital minerals, corresponded with periods of absence or closure of the channel, indicating a more sea-influenced depositional setting. This work represented an example of anthropogenic influence in a lagoonal-estuarine sedimentary system, which is a common context along the coast of Brazil.

Mineralogical and geochemical studies of phosphorite nodules in ...

African Journals Online (AJOL)

Mineralogical and geochemical studies of phosphorite nodules in the Dange Formation Sokoto Basin, Northwestern Niveria. OA Adekeye, SO Akande. Abstract. No Abstract Available Journal of Mining and Geology Vol.40(2) 2004: 101-106. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT ...

Potential risks of metal toxicity in contaminated sediments of Deule river in Northern France

International Nuclear Information System (INIS)

Lourino-Cabana, Beatriz; Lesven, Ludovic; Charriau, Adeline; Billon, Gabriel; Ouddane, Baghdad; Boughriet, Abdel

2011-01-01

Research highlights: → A historical environmental pollution is evidenced with reference to background levels. → Sedimentary trace metals partitioning is examined under undisturbed conditions. → Anoxia and diagenetic processes induce geochemical and mineralogical variabilities. → Do metals present in particles and pore waters exhibit a potential toxicity risk? → Behaviour of binding fractions contributes to trace metals scavenging. - Abstract: The aim of this paper was to evaluate the potential sediment cumulative damage and toxicity due to metal contamination in a polluted zone of Deule river (in northern France) from nearby two smelters. Metal-enrichment factors and geoaccumulation indices measured with sediment depth revealed that - compared to background levels either in local reference soils or in world rivers sediments/suspended particulate matter - Cd contributed to the highest pollution levels, followed by Zn, Pb and to a much lesser extent Cu and Ni. A comparison of the vertical distribution of AVS (acid volatile sulfides), SEM (simultaneously extracted metals), TMC (total metal concentrations), TOC (total organic carbon) and interstitial water-metal concentrations in the sediment allowed us to highlight the extent of toxicity caused by Cd, Pb, Zn, Ni and Cu and to raise the possibility of their association with certain geochemical phases. To assess the actual environmental impacts of these metals in Deule river, numerical sediment quality guidelines were further used in the present work. Sedimentary Pb, Zn, and Cd contents largely exceeded PEC (probable effect concentration) values reported as consensus-based sediment quality guidelines for freshwater ecosystems. As for risks of toxicity from pore waters, metal concentrations reached their maxima at the surficial layers of the sediment (1-3 cm) and IWCTU (Interstitial Water Criteria Toxicity Unit) observed for Pb and to a lesser extent Cd, violated the corresponding water quality data recommended

Kaolin from Acoculco (Puebla, Mexico) as a raw material: mineralogical and thermal characterization

OpenAIRE

Garcia Vallès, Maite; Pi, T.; Alfonso, P.; Canet, C.; Martínez Manent, Salvador; Jiménez-Franco, A.; Tarragó Aymerich, Mariona; Hernández-Cruz, B.

2015-01-01

The present study determined the mineralogy and thermal properties of kaolin from Acoculco (Puebla), at the eastern Trans-Mexican Volcanic Belt and compared it with the nearby deposits of Agua Blanca (Hidalgo) and Huayacocotla (Veracruz). The mineralogy of the kaolins was determined by X-ray diffraction, infrared spectroscopy and scanning electron microscopy. Thermal behaviour was studied by differential thermal analysis, dilatometry and hot-stage microscopy. The Acoculco deposit is composed ...

Anoxic sediments off Central Peru record interannual to multidecadal changes of climate and upwelling ecosystem during the last two centuries

Science.gov (United States)

Gutiérrez, D.; Sifeddine, A.; Reyss, J. L.; Vargas, G.; Velazco, F.; Salvatteci, R.; Ferreira, V.; Ortlieb, L.; Field, D.; Baumgartner, T.; Boussafir, M.; Boucher, H.; Valdés, J.; Marinovic, L.; Soler, P.; Tapia, P.

2006-01-01

High-resolution paleo-environmental and paleo-ecological archives in laminated sequences are present in selected areas from the upper continental Peruvian margin within the oxygen minimum zone. We present initial results of a multidisciplinary study (the PALEOPECES project) that aims to reconstruct environmental and ecosystem variability during the past 200 years from high-resolution records. We report chronology development, sediment structure, elemental, organic, and mineralogical compositions of a box core collected at 300 m depth off Pisco, central Peru. An average sedimentation rate of 2.2 mm y-1 was estimated from downcore excess 210Pb activities for the last 100-150 years. Extending this rate further downcore indicates that a slump located at 52 cm depth from the top of the core can be correlated with a large tsunami that struck the coast of central Peru in 1746. X-ray analyses reveal laminated structures composed of couplets of light and dark laminae. Observations under polarized microscope show that light laminae are dominated by more dense, detrital and terrigenous material, while dark laminae are less dense with greater concentrations of amorphous biogenic silica. Downcore variations in dry bulk density and X-ray radioscopy of gray level show similar patterns, including a major shift at 34 cm depth (ca. mid-nineteenth century). A finely laminated sequence, which may include annual varves, is present between 34 cm depth and the slump layer. Sediment characteristics of the sequence suggest increased seasonality of terrigenous versus biogenous sedimentation during the corresponding period. In addition to a mid-nineteenth century change and considerable multidecadal variability in TOC, there is a positive trend in the past 50 years. Mineralogical analyses from a Fourier Transformed Infrared Spectroscopy (FTIR) of the upper core covering the last 25 years, indicate higher concentrations of the mineral fraction (quartz, feldspar, kaolinite and illite) in

Anoxic sediments off Central Peru record interannual to multidecadal changes of climate and upwelling ecosystem during the last two centuries

Directory of Open Access Journals (Sweden)

D. Gutiérrez

2006-01-01

Full Text Available High-resolution paleo-environmental and paleo-ecological archives in laminated sequences are present in selected areas from the upper continental Peruvian margin within the oxygen minimum zone. We present initial results of a multidisciplinary study (the PALEOPECES project that aims to reconstruct environmental and ecosystem variability during the past 200 years from high-resolution records. We report chronology development, sediment structure, elemental, organic, and mineralogical compositions of a box core collected at 300 m depth off Pisco, central Peru. An average sedimentation rate of 2.2 mm y-1 was estimated from downcore excess 210Pb activities for the last 100-150 years. Extending this rate further downcore indicates that a slump located at 52 cm depth from the top of the core can be correlated with a large tsunami that struck the coast of central Peru in 1746. X-ray analyses reveal laminated structures composed of couplets of light and dark laminae. Observations under polarized microscope show that light laminae are dominated by more dense, detrital and terrigenous material, while dark laminae are less dense with greater concentrations of amorphous biogenic silica. Downcore variations in dry bulk density and X-ray radioscopy of gray level show similar patterns, including a major shift at 34 cm depth (ca. mid-nineteenth century. A finely laminated sequence, which may include annual varves, is present between 34 cm depth and the slump layer. Sediment characteristics of the sequence suggest increased seasonality of terrigenous versus biogenous sedimentation during the corresponding period. In addition to a mid-nineteenth century change and considerable multidecadal variability in TOC, there is a positive trend in the past 50 years. Mineralogical analyses from a Fourier Transformed Infrared Spectroscopy (FTIR of the upper core covering the last 25 years, indicate higher concentrations of the mineral fraction (quartz, feldspar, kaolinite and

Quaternary stratigraphy, sediment characteristics and geochemistry of arsenic-contaminated alluvial aquifers in the Ganges-Brahmaputra floodplain in central Bangladesh.

Science.gov (United States)

Shamsudduha, M; Uddin, A; Saunders, J A; Lee, M-K

2008-07-29

This study focuses on the Quaternary stratigraphy, sediment composition, mineralogy, and geochemistry of arsenic (As)-contaminated alluvial aquifers in the Ganges-Brahmaputra floodplain in the central Bangladesh. Arsenic concentrations in 85 tubewells in Manikganj area, 70 km northwest of Dhaka City, range from 0.25 microg/L to 191 microg/L with a mean concentration of 33 microg/L. Groundwater is mainly Ca-HCO(3) type with high concentrations of dissolved As, Fe, and Mn, but low level of SO(4). The uppermost aquifer occurs between 10 m and 80 m below the surface that has a mean arsenic concentration of 35 microg/L. Deeper aquifer (>100 m depth) has a mean arsenic concentration of 18 microg/L. Sediments in the upper aquifer are mostly gray to dark-gray, whereas sediments in the deep aquifer are mostly yellowing-gray to brown. Quartz, feldspar, mica, hornblende, garnet, kyanite, tourmaline, magnetite, ilmenite are the major minerals in sediments from both aquifers. Biotite and potassium feldspar are dominant in shallow aquifer, although plagioclase feldspar and garnet are abundant in deep aquifer sediments. Sediment composition suggests a mixed provenance with sediment supplies from both orogenic belts and cratons. High arsenic concentrations in sediments are found within the upper 50 m in drilled core samples. Statistical analysis shows that As, Fe, Mn, Ca, and P are strongly correlated in sediments. Concentrations of Cd, Cu, Ni, Zn, and Bi also show strong correlations with arsenic in the Manikganj sediment cores. Authigenic goethite concretions, possibly formed by bacteria, are found in the shallow sediments, which contain arsenic of a concentration as high as 8.8 mg/kg. High arsenic concentrations in aquifers are associated with fine-grained sediments that were derived mostly from the recycled orogens and relatively rapidly deposited mainly by meandering channels during the Early to Middle Holocene rising sea-level conditions.

Endogenic carbonate sedimentation in Bear Lake, Utah and Idaho, over the last two glacial-interglacial cycles

Science.gov (United States)

Dean, W.E.

2009-01-01

Sediments deposited over the past 220,000 years in Bear Lake, Utah and Idaho, are predominantly calcareous silty clay, with calcite as the dominant carbonate mineral. The abundance of siliciclastic sediment indicates that the Bear River usually was connected to Bear Lake. However, three marl intervals containing more than 50% CaCO3 were deposited during the Holocene and the last two interglacial intervals, equivalent to marine oxygen isotope stages (MIS) 5 and 7, indicating times when the Bear River was not connected to the lake. Aragonite is the dominant mineral in two of these three high-carbonate intervals. The high-carbonate, aragonitic intervals coincide with warm interglacial continental climates and warm Pacific sea-surface temperatures. Aragonite also is the dominant mineral in a carbonate-cemented microbialite mound that formed in the southwestern part of the lake over the last several thousand years. The history of carbonate sedimentation in Bear Lake is documented through the study of isotopic ratios of oxygen, carbon, and strontium, organic carbon content, CaCO3 content, X-ray diffraction mineralogy, and HCl-leach chemistry on samples from sediment traps, gravity cores, piston cores, drill cores, and microbialites. Sediment-trap studies show that the carbonate mineral that precipitates in the surface waters of the lake today is high-Mg calcite. The lake began to precipitate high-Mg calcite sometime in the mid-twentieth century after the artificial diversion of Bear River into Bear Lake that began in 1911. This diversion drastically reduced the salinity and Mg2+:Ca2+ of the lake water and changed the primary carbonate precipitate from aragonite to high-Mg calcite. However, sediment-trap and core studies show that aragonite is the dominant mineral accumulating on the lake floor today, even though it is not precipitating in surface waters. The isotopic studies show that this aragonite is derived from reworking and redistribution of shallow-water sediment

Río Tinto: A Geochemical and Mineralogical Terrestrial Analogue of Mars

Directory of Open Access Journals (Sweden)

Ricardo Amils

2014-09-01

Full Text Available The geomicrobiological characterization of the water column and sediments of Río Tinto (Huelva, Southwestern Spain have proven the importance of the iron and the sulfur cycles, not only in generating the extreme conditions of the habitat (low pH, high concentration of toxic heavy metals, but also in maintaining the high level of microbial diversity detected in the basin. It has been proven that the extreme acidic conditions of Río Tinto basin are not the product of 5000 years of mining activity in the area, but the consequence of an active underground bioreactor that obtains its energy from the massive sulfidic minerals existing in the Iberian Pyrite Belt. Two drilling projects, MARTE (Mars Astrobiology Research and Technology Experiment (2003–2006 and IPBSL (Iberian Pyrite Belt Subsurface Life Detection (2011–2015, were developed and carried out to provide evidence of subsurface microbial activity and the potential resources that support these activities. The reduced substrates and the oxidants that drive the system appear to come from the rock matrix. These resources need only groundwater to launch diverse microbial metabolisms. The similarities between the vast sulfate and iron oxide deposits on Mars and the main sulfide bioleaching products found in the Tinto basin have given Río Tinto the status of a geochemical and mineralogical Mars terrestrial analogue.

Modern Sedimentation along the SE Bangladesh Coast Reveal Surprisingly Low Accumulation Rates

Science.gov (United States)

McHugh, C.; Mustaque, S.; Mondal, D. R.; Akhter, S. H.; Iqbal, M.

2016-12-01

Recent sediments recovered along the SE coast of Bangladesh, from Teknaf to Cox's Bazar and drainage basin analyses reveal sediment sources and very low sedimentation rates of 1mm/year. These low rates are surprisingly low given that this coast is adjacent to the Ganges-Brahmaputra Delta with a yearly discharge of 1GT. The Teknaf anticline (elevation 200 m), part of the western Burma fold-thrust belt dominates the topography extending across and along the Teknaf peninsula. It is thought to have begun evolving since the Miocene (Alam et al. 2003 & Allen et al. 2008). Presently the anticline foothills on the west are flanked by uplifted terraces, the youngest linked to coseismic displacement during the 1762 earthquake (Mondal et al. 2015), and a narrow beach 60-200 m in width. Petrography, semi-quantitative bulk mineralogy and SEM/EDX analyses were conducted on sediments recovered along the west coast from 1-4 m deep trenches and three 4-8 m deep drill holes. GIS mapping of drainage basins and quartz-feldspar-lithic (QFL) ternary plots based on grain counting show mixing of sediments from multiple sources: Himalayan provenance of metamorphic and igneous origin (garnet-mostly almandine, tourmaline, rutile, kyanite, zircon, sillimanite and clinopyroxene) similar to Uddin et al. (2007); Brahmaputra provenance of igneous and metamorphic origin (amphibole, epidote, plagioclase 40% Na and 60% Ca, apatite, ilmenite, magnetite, Cr-spinel and garnet-mostly grossular,) as indicated by Garzanti et al. (2010) & Rahman et al. (2016) and Burmese sources (cassiterite and wolframite) (Zaw 1990 & Searle et al. 2007). Low sedimentation rates are the result of two main factors: 1. Strong longshore currents from the south-east that interact with high tidal ranges as evidenced by the morphology of sand waves and ridge and runnel landforms along the beach. 2. Streams draining the Teknaf anticline are dry during the winter and during summer monsoon rains, the sediments bypass the narrow

The global influence of dust mineralogical composition on heterogeneous ice nucleation in mixed-phase clouds

International Nuclear Information System (INIS)

Hoose, C; Lohmann, U; Erdin, R; Tegen, I

2008-01-01

Mineral dust is the dominant natural ice nucleating aerosol. Its ice nucleation efficiency depends on the mineralogical composition. We show the first sensitivity studies with a global climate model and a three-dimensional dust mineralogy. Results show that, depending on the dust mineralogical composition, coating with soluble material from anthropogenic sources can lead to quasi-deactivation of natural dust ice nuclei. This effect counteracts the increased cloud glaciation by anthropogenic black carbon particles. The resulting aerosol indirect effect through the glaciation of mixed-phase clouds by black carbon particles is small (+0.1 W m -2 in the shortwave top-of-the-atmosphere radiation in the northern hemisphere)

Mineralogical and geochemical characterization of the Jurassic coal from Egypt

Energy Technology Data Exchange (ETDEWEB)

Baioumy, H.M. [Central Metallurgical Research and Development Institute, Cairo (Egypt)

2009-06-15

The Jurassic coal deposit in the Maghara area, Sinai, Egypt contains at least 11 coal seams of lenticular shape. The thickness of the main coal seams ranges from 130 cm to 2 m and are underlain and overlain by thin black shale beds. Mineralogical analysis indicated that this coal is characterized by low mineral matter with traces of quartz in some samples. However, coal ash is made up of quartz with traces of calcite, anhydrite, and hematite. Analysis of coal rank parameters indicated that the Maghara coal can be classified as medium volatile bituminous coal. The high sulfur contents and the relatively high proportion of pyritic sulfur suggest a possible marine transgression after the deposition of precursor peat. This interpretation is supported by the relatively high B contents. The relatively high Ge in the Maghara coal could be attributed to an infiltration of Ge enriched water from the surrounding siliceous sediments probably during diagenesis. The high Au contents were contributed to an Au-rich provenance of the ash contents of this coal. Rare earth elements geochemistry indicated low concentrations of these elements with slight enrichment of light rare earth elements (LREEs), slight negative Eu anomaly, and relatively flat heavy rare earth elements (HREEs) patterns. The low contents of trace and rare earth elements, particularly those with environmental relevance, compared to the usual concentration ranges in worldwide coal gives an advantage for this coal.

Coupled transport-reaction pathways and distribution patterns between siliciclastic-carbonate sediments at the Ria de Vigo

Science.gov (United States)

García, T.; Velo, A.; Fernandez-Bastero, S.; Gago-Duport, L.; Santos, A.; Alejo, I.; Vilas, F.

2005-02-01

This paper examines the linkages between the space-distribution of grain sizes and the relative percentage of the amount of mineral species that result from the mixing process of siliciclastic and carbonate sediments at the Ria de Vigo (NW of Spain). The space-distribution of minerals was initially determined, starting from a detailed mineralogical study based on XRD-Rietveld analysis of the superficial sediments. Correlations between the maps obtained for grain sizes, average fractions of either siliciclastic or carbonates, as well as for individual-minerals, were further stabilised. From this analysis, spatially organized patterns were found between carbonates and several minerals involved in the siliciclastic fraction. In particular, a coupled behaviour is observed between plagioclases and carbonates, in terms of their relative percentage amounts and the grain size distribution. In order to explain these results a conceptual model is proposed, based on the interplay between chemical processes at the seawater-sediment interface and hydrodynamical factors. This model suggests the existence of chemical control mechanisms that, by selective processes of dissolution-crystallization, constrain the mixed environment's long-term evolution, inducing the formation of self-organized sedimentary patterns.

Remote In-Situ Quantitative Mineralogical Analysis Using XRD/XRF

Science.gov (United States)

Blake, D. F.; Bish, D.; Vaniman, D.; Chipera, S.; Sarrazin, P.; Collins, S. A.; Elliott, S. T.

2001-01-01

X-Ray Diffraction (XRD) is the most direct and accurate method for determining mineralogy. The CHEMIN XRD/XRF instrument has shown promising results on a variety of mineral and rock samples. Additional information is contained in the original extended abstract.

Characterizing the Fate and Mobility of Phosphorus in Utah Lake Sediments

Science.gov (United States)

Carling, G. T.; Randall, M.; Nelson, S.; Rey, K.; Hansen, N.; Bickmore, B.; Miller, T.

2017-12-01

An increasing number of lakes worldwide are impacted by eutrophication and harmful algal blooms due to anthropogenic nutrient inputs. Utah Lake is a unique eutrophic freshwater lake that is naturally shallow, turbid, and alkaline with high dissolved oxygen levels that has experienced severe algal blooms in recent years. Recently, the Utah Division of Water Quality has proposed a new limitation of phosphorus (P) loading to Utah Lake from wastewater treatment plants in an effort to mitigate eutrophication. However, reducing external P loads may not lead to immediate improvements in water quality due to the legacy pool of nutrients in lake sediments. The purpose of this study was to characterize the fate and mobility of P in Utah Lake sediments to better understand P cycling in this unique system. We analyzed P speciation, mineralogy, and binding capacity in lake sediment samples collected from 15 locations across Utah Lake. P concentrations in sediment ranged from 615 to 1894 ppm, with highest concentrations in Provo Bay near the major metropolitan area. Sequential leach tests indicate that 25-50% of P is associated with Ca (CaCO₃/ Ca10(PO4)6(OH,F,Cl)2 ≈ P) and 40-60% is associated with Fe (Fe(OOH) ≈ P). Ca-associated P was confirmed by SEM images, which showed the highest P concentrations correlating with Ca (carbonate minerals/apatite). The Ca-associated P fraction is likely immobile, but the Fe-bound P is potentially bioavailable under changing redox conditions. Batch sorption results indicate that lake sediments have a high capacity to absorb and remove P from the water column, with an average uptake of 70-96% removal over the range of 1-10 mg/L P. Mineral precipitation and sorption to bottom sediments is an efficient removal mechanism of P in Utah Lake, but a significant portion of P may be temporarily available for resuspension and cycling in surface waters. Mitigating lake eutrophication is a complex problem that goes beyond decreasing external nutrient

Characterization of Vadose Zone Sediment: Uncontaminated RCRA Borehole Core Samples and Composite Samples

International Nuclear Information System (INIS)

Serne, R. Jeffrey; Bjornstad, Bruce N.; Schaef, Herbert T.; Williams, Bruce A.; Lanigan, David C.; Horton, Duane G.; Clayton, Ray E.; Mitroshkov, Alexandre V.; Legore, Virginia L.; O'Hara, Matthew J.; Brown, Christopher F.; Parker, Kent E.; Kutnyakov, Igor V.; Serne, Jennifer N.; Last, George V.; Smith, Steven C.; Lindenmeier, Clark W.; Zachara, John M.; Burke, Deborah Sd.

2001-01-01

The overall goal of the of the Tank Farm Vadose Zone Project, led by CH2M HILL Hanford Group, Inc., is to define risks from past and future single-shell tank farm activities. To meet this goal, CH2M HILL Hanford Group, Inc. asked scientists from Pacific Northwest National Laboratory to perform detailed analyses on vadose zone sediment from within the S-SX Waste Management Area. This report is the first in a series of four reports to present the results of these analyses. Specifically, this report contains all the geologic, geochemical, and selected physical characterization data collected on vadose zone sediment recovered from RCRA borehole bore samples and composite samples. Intact cores from two RCRA boreholes (299-W22-48 and 299-W22-50) near the SX Tank Farm and four, large-quantity grab samples from outcrop sediment on and off the Hanford Site were sampled to better understand the fate of contaminants in the vadose zone beneath underground storage tanks at the Hanford Site. Borehole and outcrop samples analyzed for this report are located outside the tank farms, and therefore may be considered standard or background samples from which to compare contaminated sediments within the tank farms themselves. This report presents our interpretation of the physical, chemical, and mineralogical properties of the uncontaminated vadose zone sediments, and variations in the vertical distribution of these properties. The information presented in this report is intended to support preparation of the S-SX Field Investigation Report to be prepared by CH2M Hill Hanford Group, Inc. as well as future remediation actions at the S-SX Tank Farm

Geochemistry of the near surface sediments of the Nares Abyssal Plain

International Nuclear Information System (INIS)

Carpenter, M.S.N.; Colley, S.; Elderfield, H.; Kennedy, H.A.; Thomson, J.; Wilson, T.R.S.

1983-01-01

The geochemistry of a suite of box and 2m gravity cores from the Nares Abyssal Plain has been characterised by means of pore water analyses, XRF determination of major and trace element concentrations, mineralogy and 230 Thsub(excess) dating. The interstitial fluid environment of those deep-sea clays is mildly reducing, although one site exhibits manganese remobilisation and precipitation. Despite their marked colour differences, there is a similarity in clay mineralogy between the grey silt/clay turbidites and the brown clays found in the area. Sediment accumulation rates of pelagic brown clays range between 0.5 and 1.0 cm/10 3 yr. These pelagic brown clays are metal-rich relative to the grey clays, and a model is used to estimate the hydrogenous metal fluxes on the assumption that they are constant over the Plain. This model gives values of approx. 1300 μg/cm 2 /10 3 yr for Mn, approx. 2600 μg/cm 2 /10 3 yr for Fe and Co, Ni, Cu, V and Zn in the range 6 to 26 μg/cm 2 /10 3 yr. An associated model-derived estimate of the detrital contents of the same elements agrees well with the mean values of the grey clays and of average shale. Metal-poor brown clays and assorted minor lithologies are intermediate in composition between these two end-members. (author)

Temperature buffer test. Hydro-mechanical and chemical/ mineralogical characterizations

International Nuclear Information System (INIS)

Aakesson, Mattias; Olsson, Siv; Dueck, Ann; Nilsson, Ulf; Karnland, Ola; Kiviranta, Leena; Kumpulainen, Sirpa; Linden, Johan

2012-01-01

The Temperature Buffer Test (TBT) is a joint project between SKB/ANDRA and supported by ENRESA (modeling) and DBE (instrumentation), which aims at improving the understanding and to model the thermo-hydro-mechanical behavior of buffers made of swelling clay submitted to high temperatures (over 100 deg C) during the water saturation process. The test has been carried out in a KBS-3 deposition hole at Aspo HRL. It was installed during the spring of 2003. Two steel heaters (3 m long, 0.6 m diameter) and two buffer arrangements have been investigated: the lower heater was surrounded by rings of compacted Wyoming bentonite only, whereas the upper heater was surrounded by a composite barrier, with a sand shield between the heater and the bentonite. The test was dismantled and sampled during the winter of 2009/2010. This report presents the hydro-mechanical and chemical/mineralogical characterization program which was launched subsequent to the dismantling operation. The main goal has been to investigate if any significant differences could be observed between material from the field experiment and the reference material. The field samples were mainly taken from Ring 4 (located at the mid-section around the lower heater), in which the temperature in the innermost part reached 155 deg C. The following hydro-mechanical properties have been determined for the material (test technique within brackets): hydraulic conductivity (swelling pressure device), swelling pressure (swelling pressure device), unconfined compression strength (mechanical press), shear strength (triaxial cell) and retention properties (jar method). The following chemical/mineralogical properties (methods within brackets) were determined: anion analysis of water leachates (IC), chemical composition (ICP/AES+MS, EGA), cation exchange capacity (CEC, Cu-trien method) and exchangeable cations (exchange with NH4, ICPAES), mineralogical composition (XRD and FTIR), element distribution and microstructure (SEM and

When Theory Meets Data: Comparing Model Predictions Of Hillslope Sediment Size With Field Measurements.

Science.gov (United States)

Mahmoudi, M.; Sklar, L. S.; Leclere, S.; Davis, J. D.; Stine, A.

2017-12-01

The size distributions of sediment produced on hillslopes and supplied to river channels influence a wide range of fluvial processes, from bedrock river incision to the creation of aquatic habitats. However, the factors that control hillslope sediment size are poorly understood, limiting our ability to predict sediment size and model the evolution of sediment size distributions across landscapes. Recently separate field and theoretical investigations have begun to address this knowledge gap. Here we compare the predictions of several emerging modeling approaches to landscapes where high quality field data are available. Our goals are to explore the sensitivity and applicability of the theoretical models in each field context, and ultimately to provide a foundation for incorporating hillslope sediment size into models of landscape evolution. The field data include published measurements of hillslope sediment size from the Kohala peninsula on the island of Hawaii and tributaries to the Feather River in the northern Sierra Nevada mountains of California, and an unpublished data set from the Inyo Creek catchment of the southern Sierra Nevada. These data are compared to predictions adapted from recently published modeling approaches that include elements of topography, geology, structure, climate and erosion rate. Predictive models for each site are built in ArcGIS using field condition datasets: DEM topography (slope, aspect, curvature), bedrock geology (lithology, mineralogy), structure (fault location, fracture density), climate data (mean annual precipitation and temperature), and estimates of erosion rates. Preliminary analysis suggests that models may be finely tuned to the calibration sites, particularly when field conditions most closely satisfy model assumptions, leading to unrealistic predictions from extrapolation. We suggest a path forward for developing a computationally tractable method for incorporating spatial variation in production of hillslope

The problem of predicting the size distribution of sediment supplied by hillslopes to rivers

Science.gov (United States)

Sklar, Leonard S.; Riebe, Clifford S.; Marshall, Jill A.; Genetti, Jennifer; Leclere, Shirin; Lukens, Claire L.; Merces, Viviane

2017-01-01

Sediments link hillslopes to river channels. The size of sediments entering channels is a key control on river morphodynamics across a range of scales, from channel response to human land use to landscape response to changes in tectonic and climatic forcing. However, very little is known about what controls the size distribution of particles eroded from bedrock on hillslopes, and how particle sizes evolve before sediments are delivered to channels. Here we take the first steps toward building a geomorphic transport law to predict the size distribution of particles produced on hillslopes and supplied to channels. We begin by identifying independent variables that can be used to quantify the influence of five key boundary conditions: lithology, climate, life, erosion rate, and topography, which together determine the suite of geomorphic processes that produce and transport sediments on hillslopes. We then consider the physical and chemical mechanisms that determine the initial size distribution of rock fragments supplied to the hillslope weathering system, and the duration and intensity of weathering experienced by particles on their journey from bedrock to the channel. We propose a simple modeling framework with two components. First, the initial rock fragment sizes are set by the distribution of spacing between fractures in unweathered rock, which is influenced by stresses encountered by rock during exhumation and by rock resistance to fracture propagation. That initial size distribution is then transformed by a weathering function that captures the influence of climate and mineralogy on chemical weathering potential, and the influence of erosion rate and soil depth on residence time and the extent of particle size reduction. Model applications illustrate how spatial variation in weathering regime can lead to bimodal size distributions and downstream fining of channel sediment by down-valley fining of hillslope sediment supply, two examples of hillslope control on

Vertical evolution of the Cínovec granite cupola – chemical and mineralogical record

Czech Academy of Sciences Publication Activity Database

Breiter, Karel

2016-01-01

Roč. 46 (2016), s. 4-6 E-ISSN 1434-7512. [Late Paleozoic magmatism in the Erzgebirge / Krušné hory: Magma genesis, tectonics, geophysics, and mineral deposits : abstracts. 11.11.2016-12.11.2016, Freiberg] R&D Projects: GA ČR GA14-13600S Institutional support: RVO:67985831 Keywords : granite * Cínovec * geology * mineralogy * geochemistry Subject RIV: DB - Geology ; Mineralogy http://tu-freiberg.de/sites/default/files/media/institut-fuer-geologie-718/pdf/fog_volume_46.pdf

Mineralogy and geochemistry of density-separated Greek lignite fractions

NARCIS (Netherlands)

Iordanidis, A.; Doesburg, van J.D.J.

2006-01-01

In this study, lignite samples were collected from the Ptolemais region, northern Greece, homogenized, crushed to less than I nun, and separated in three density fractions using heavy media. The mineralogical investigation of the density fractions showed a predominance of pyrite in the light

Mineralogical Studies Related to Endemic Diseases in Rural P. R. China

Science.gov (United States)

Belkin, H. E.; Zheng, B.; Finkelman, R. B.

2003-12-01

Domestic combustion of coal for heating and cooking is mostly confined to the world's developing countries and probably involves about 1 billion persons in China, India, Indonesia, and Africa. Various endemic diseases affecting millions of people involving arsenic, selenium, and fluorine poisoning have been associated with domestic coal combustion in rural China. We have investigated the relationship between mineralized coals (and stone coals) and disease occurrences in Guizhou and Hubei Provinces. The mineralogy of the coals has been studied by a wide variety of techniques, including optical petrography, scanning electron microscopy, electron microprobe analysis, ion probe, Synchrotron XANES-EXAFS, and Raman spectroscopy. Arsenic enrichment (up to 3 weight percent) in Upper Permian Longtan Formation coals, southwestern Guizhou Province, occurs in both 3+ and 5+ valence states. Arsenic occurs in arsenopyrite, pyrite, Al-phosphate, scorodite, Fe-oxides, and as an organically-bound species. Fluorine poisoning, much more widespread than arsenic-poisoning, is related to burning F-rich coals and F-rich clays as admixtures. Mineralogical and chemical analysis suggests that the clays contain the fluorine probably substituting for the hydroxyl group. Localized selenium poisoning in Hubei Province is related to Se-rich stone coals. The selenium occurs as a native element and in rare mandarinoite. In these three cases, knowledge of the paragenesis and mineralogy of the element enrichment in coal was vital to help understand and mitigate the endemic diseases. For the situation concerning arsenic and selenium poisoning, suspect coals have been identified and mining from these deposits has been curtailed. Fluorine has been a much more difficult problem for the local public health officials as both the coal and clay in the burning admixture can contain high fluorine. Regional geochemical and mineralogical studies will help to define coal and clay with low fluorine, suitable for

Chemical and Mineralogical Characterization of a Hematite-bearing Ridge on Mauna Kea, Hawaii: A Potential Mineralogical Process Analog for the Mount Sharp Hematite Ridge

Science.gov (United States)

Graff, T. G.; Morris, R. V.; Ming, D. W.; Hamilton, J. C.; Adams, M.; Fraeman, A. A.; Arvidson, R. E.; Catalano, J. G.; Mertzman, S. A.

2014-01-01

The Mars Science Laboratory (MSL) rover Curiosity landed in Gale Crater in August 2012 and is currently roving towards the layered central mound known as Mount Sharp [1]. Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) hyperspectral data indicate Mount Sharp contains an 5 km stratigraphic sequence including Fe-Mg smectites, hematite, and hydrated sulfates in the lower layers separated by an unconformity from the overlying anhydrous strata [1,2,3]. Hematite was initially detected in CRISM data to occur in the lower sulfate layers on the north side of the mound [2]. [3] further mapped a distinct hematite detection occurring as part of a 200 m wide ridge that extends 6.5 km NE-SW, approximately parallel with the base of Mount Sharp. It is likely a target for in-situ analyses by Curiosity. We document here the occurrence of a stratum of hematite-bearing breccia that is exposed on the Puu Poliahu cinder cone near the summit of Mauna Kea volcano (Hawaii) (Fig.1). The stratum is more resistant to weathering than surrounding material, giving it the appearance of a ridge. The Mauna Kea hematite ridge is thus arguably a potential terrestrial mineralogical and process analog for the Gale Crater hematite ridge. We are acquiring a variety of chemical and mineralogical data on the Mauna Kea samples, with a focus on the chemical and mineralogical information already available or planned for the Gale hematite ridge.

Biogeochemistry of Fe and Tc Reduction and Oxidation in FRC Sediment

International Nuclear Information System (INIS)

John M, Zachara; James K, Fredrickson; Ravi K, Kukkadapu; Steven C, Smith; David W, Kennedy

2004-01-01

The objectives are: (1) To rigorously characterize the distribution of Fe(II) and Fe(III) in FRC sediment. (2) To identify changes to Fe(II)/Fe(III) distribution and concentration resulting from DIRB activity. (3) To determine the dependence of Tc(VII) reduction rate on biogenic Fe(II) and it's forms. (4) To establish tendency of Tc(IV) and biogenic Fe(II) to oxidize and their effects on Tc immobilization. The mineralogic and chemical properties of the pristine, bioreduced, and chemically extracted FRC sediments were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), X-ray microscopy (XRM, at the PNC-CAT beamline at APS), Moessbauer spectroscopy, and scanning and transmission electron microscopy with lattice fringe imaging. Chemical extraction included dithionite-citrate-bicarbonate (DCB), acid ammonium oxalate (AAO), and hydroxylamine hydrochloride (HAH). The FRC sediment was incubated under anoxic conditions with the facultative dissimilatory metal-reducing bacterium Shewanella putrefaciens, strain CN32 in defined aqueous solutions/media with bicarbonate and PIPES buffers for time periods exceeding 75 d. Lactate was used as the electron donor. Aqueous and sorbed Fe(II) (ferrozine assay and 0.5 N HCl extraction) and Mn(II) (ICP-MS and 10 mM CuSO 4 extraction), and pH were monitored to define the reduction progress and extent. The bioreduced materials were characterized using the abovementioned techniques. Bioreduced (pasteurized) sediment or chemically extracted/reduced sediment spiked with Fe(II) was washed with a PIPES buffer/electrolyte solution, and spiked with NaTc(VII)O 4 to yield a concentration of 20 (micro)M. The Tc(VII)-spiked samples were agitated and equilibrated at 25 C and sampled over time to assess the Tc(VII) reduction rate. Selected sediment samples containing 20 (micro)M of reduced Tc [Tc(IV)] were subjected to oxidation by: (1) successive headspace replacements of air, and (2) open system equilibration with air. Removed aqueous

Mineralogic and petrologic investigation of pre-test core samples from the spent fuel test-climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Qualheim, B.J.

1983-12-01

Pre-test samples obtained from just inside the perimeter of the canister emplacement holes of the Spent Fuel Test-Climax have been characterized by petrographic and microanalytical techniques. The primary quartz monzonite has undergone various degrees of hydrothermal alteration as a result of natural processes. Alteration is most apparent on primary plagioclase and biotite. The most common secondary phases on plagioclase are muscovite and calcite, while the most common secondary phases on biotite are epidote and chlorite. The major alteration zones encountered are localized along filled fractures, i.e. veins. The thickness and mineralogy of the alteration zones can be correlated with the vein mineralogy, becoming wider and more complex mineralogically when the veins contain calcite. 7 references, 10 figures, 4 tables

Study of environmental pollution and mineralogical characterization of sediment rivers from Brazilian coal mining acid drainage

Energy Technology Data Exchange (ETDEWEB)

Silva, Luis F.O., E-mail: felipeqma@hotmail.com [Environmental Science and Nanotechnology Department, Institute of Environmental Research and Human Development – IPADH, Capivari de Baixo, Santa Catarina (Brazil); Laboratory of Environmental Researches and Nanotechnology Development, Centro Universitário La Salle, Victor Barreto, 2288 Centro 92010-000, Canoas, RS (Brazil); Fdez- Ortiz de Vallejuelo, Silvia; Martinez-Arkarazo, Irantzu; Castro, Kepa [Department of Analytical Chemistry, University of the Basque Country (EHU/UPV), P.O. Box 644, 48080 Bilbao, Basque Country (Spain); Oliveira, Marcos L.S. [Environmental Science and Nanotechnology Department, Institute of Environmental Research and Human Development – IPADH, Capivari de Baixo, Santa Catarina (Brazil); Sampaio, Carlos H.; Brum, Irineu A.S. de [Universidade Federal do Rio Grande do Sul, Escola de Engenharia, Departamento de Metalurgia, Centro de Tecnologia, Av. Bento Gonçalves, 9500, Bairro Agronomia, CEP: 91501-970, Porto Alegre, RS (Brazil); Leão, Felipe B. de; Taffarel, Silvio R. [Laboratory of Environmental Researches and Nanotechnology Development, Centro Universitário La Salle, Victor Barreto, 2288 Centro 92010-000, Canoas, RS (Brazil); Madariaga, Juan M. [Department of Analytical Chemistry, University of the Basque Country (EHU/UPV), P.O. Box 644, 48080 Bilbao, Basque Country (Spain)

2013-03-01

Acid drainage from coal mines and metal mining is a major source of underground and surface water contamination in the world. The coal mining acid drainage (CMAD) from mine contains large amount of solids in suspension and a high content of sulphate and dissolved metals (Al, Mn, Zn, Cu, Pb, Fe, etc.) that finally are deposited in the rivers. Since this problem can persist for centuries after mine abandonment, it is necessary to apply multidisciplinary methods to determine the potential risk in a determinate area. These multidisciplinary methods must include molecular and elemental analysis and finally all information must be studied statistically. This methodology was used in the case of coal mining acid drainage from the Tubarao River (Santa Catarina, Brazil). During molecular analysis, Raman Spectroscopy, electron bean, and X-ray diffraction (XRD) have been proven very useful for the study of minerals present in sediment rivers near this CMAD. The obtained spectra allow the precise identification of the minerals as jarosite, quartz, clays, etc. The elemental analysis (Al, As, Fe, K, Na, Ba, Mg, Mn, Ti, V, Zn, Ag, Co, Li, Mo, Ni, Se, Sn, W, B, Cr, Cu, Pb and Sr) was realised by inductively coupled plasma mass spectrometry (ICP-MS). Statistical analysis (Principal Component Analysis) of these dates of concentration reveals the existence of different groups of samples with specific pollution profiles in different areas of the Tubarao River. Highlights: ► Increasing coal drainage sediments geochemical information will increase human health information in this area. ► Brazilian coal mining information will increase recuperation planning information. ► The nanominerals showed strong sorption ability to aqueous hazardous elements.

Study of environmental pollution and mineralogical characterization of sediment rivers from Brazilian coal mining acid drainage

International Nuclear Information System (INIS)

Silva, Luis F.O.; Fdez- Ortiz de Vallejuelo, Silvia; Martinez-Arkarazo, Irantzu; Castro, Kepa; Oliveira, Marcos L.S.; Sampaio, Carlos H.; Brum, Irineu A.S. de; Leão, Felipe B. de; Taffarel, Silvio R.; Madariaga, Juan M.

2013-01-01

Acid drainage from coal mines and metal mining is a major source of underground and surface water contamination in the world. The coal mining acid drainage (CMAD) from mine contains large amount of solids in suspension and a high content of sulphate and dissolved metals (Al, Mn, Zn, Cu, Pb, Fe, etc.) that finally are deposited in the rivers. Since this problem can persist for centuries after mine abandonment, it is necessary to apply multidisciplinary methods to determine the potential risk in a determinate area. These multidisciplinary methods must include molecular and elemental analysis and finally all information must be studied statistically. This methodology was used in the case of coal mining acid drainage from the Tubarao River (Santa Catarina, Brazil). During molecular analysis, Raman Spectroscopy, electron bean, and X-ray diffraction (XRD) have been proven very useful for the study of minerals present in sediment rivers near this CMAD. The obtained spectra allow the precise identification of the minerals as jarosite, quartz, clays, etc. The elemental analysis (Al, As, Fe, K, Na, Ba, Mg, Mn, Ti, V, Zn, Ag, Co, Li, Mo, Ni, Se, Sn, W, B, Cr, Cu, Pb and Sr) was realised by inductively coupled plasma mass spectrometry (ICP-MS). Statistical analysis (Principal Component Analysis) of these dates of concentration reveals the existence of different groups of samples with specific pollution profiles in different areas of the Tubarao River. Highlights: ► Increasing coal drainage sediments geochemical information will increase human health information in this area. ► Brazilian coal mining information will increase recuperation planning information. ► The nanominerals showed strong sorption ability to aqueous hazardous elements

Fine particle magnetic mineralogy of archaeological ceramics

International Nuclear Information System (INIS)

Atkinson, D; King, J A

2005-01-01

This study investigated the magnetic mineralogy of a worldwide collection of archaeological pottery. The mineral types, the mass fractions and the domain states of the constituent magnetic fine particles were elucidated from a range of measurements including magnetic hysteresis behaviour, the acquisition of isothermal remanence, low field susceptibility and thermomagnetic curves. The magnetic mineralogy of most samples was dominated by magnetite. Titanomagnetites with limited titanium substitution and cation deficient magnetites (indicative of low temperature oxidation) were dominant in some samples. Haematite was detected in 53% of the samples, but seldom contributed much to the saturation magnetization. Magnetic particle sizes are skewed to smaller sizes, with sherds mostly having a large superparamagnetic or a stable single domain fraction. Low temperature susceptibility data suggest that 30% of samples had some multidomain component. The percentage by mass of magnetic material in the ancient pottery studied was less than 0.8% for all but one of the samples and the majority of samples contain less than 0.3% by weight of magnetic fine particles. The presence of low temperature oxidation in many samples and the occurrence of a multidomain component in a third of the collection suggest that ancient pottery may not always be suitable for determining the intensity of the ancient geomagnetic field

Chemistry and Mineralogy of Antarctica Dry Valley Soils: Implications for Mars

Science.gov (United States)

Quinn, J. E.; Golden, D. C.; Graff, T. G.; Ming, D. W.; Morris, R. V.; Douglas, S.; Kounaves, S. P.; McKay, C. P.; Tamppari, L, K.; Smith, P. H.;

Qualitative characterization by x-ray diffraction from soils: mineralogy conditions to benefit the environment

International Nuclear Information System (INIS)

Fujiyama, Bruna Sayuri; Tavares, Mauricio de Moraes

2010-01-01

Four samples were collected from four soil profiles located in the Rural Federal University of Amazonia. These, were analyzed parameters such as color, texture, consistency, granulometry, porosity and water absorption. We identified the following soil types: Distrofic Yellow Latosoil; Lateritic Concretionary; distrofic Low Humic Gley. The work was to continue the qualitative analysis by X-rays diffraction, identifying the mineralogical composition of each sample. Explaining the mineralogical conditions that affect or benefit the environment. (author)

Mineralogy and pore water chemistry of a boiler ash from a MSW fluidized-bed incinerator.

Science.gov (United States)

Bodénan, F; Guyonnet, D; Piantone, P; Blanc, P

2010-07-01

This paper presents an investigation of the mineralogy and pore water chemistry of a boiler ash sampled from a municipal solid waste fluidized-bed incinerator, subject to 18 months of dynamic leaching in a large percolation column experiment. A particular focus is on the redox behaviour of Cr(VI) in relation to metal aluminium Al(0), as chromium may represent an environmental or health hazard. The leaching behaviour and interaction between Cr(VI) and Al(0) are interpreted on the basis of mineralogical evolutions observed over the 18-month period and of saturation indices calculated with the geochemical code PhreeqC and reviewed thermodynamic data. Results of mineralogical analyses show in particular the alteration of mineral phases during leaching (e.g. quartz and metal aluminium grains), while geochemical calculations suggest equilibria of percolating fluids with respect to specific mineral phases (e.g. monohydrocalcite and aluminium hydroxide). The combination of leaching data on a large scale and mineralogical analyses document the coupled leaching behaviour of aluminium and chromium, with chromium appearing in the pore fluids in its hexavalent and mobile state once metal aluminium is no longer available for chromium reduction. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Mineralogy and pore water chemistry of a boiler ash from a MSW fluidized-bed incinerator

International Nuclear Information System (INIS)

Bodenan, F.; Guyonnet, D.; Piantone, P.; Blanc, P.

2010-01-01

This paper presents an investigation of the mineralogy and pore water chemistry of a boiler ash sampled from a municipal solid waste fluidized-bed incinerator, subject to 18 months of dynamic leaching in a large percolation column experiment. A particular focus is on the redox behaviour of Cr(VI) in relation to metal aluminium Al 0 , as chromium may represent an environmental or health hazard. The leaching behaviour and interaction between Cr(VI) and Al 0 are interpreted on the basis of mineralogical evolutions observed over the 18-month period and of saturation indices calculated with the geochemical code PhreeqC and reviewed thermodynamic data. Results of mineralogical analyses show in particular the alteration of mineral phases during leaching (e.g. quartz and metal aluminium grains), while geochemical calculations suggest equilibria of percolating fluids with respect to specific mineral phases (e.g. monohydrocalcite and aluminium hydroxide). The combination of leaching data on a large scale and mineralogical analyses document the coupled leaching behaviour of aluminium and chromium, with chromium appearing in the pore fluids in its hexavalent and mobile state once metal aluminium is no longer available for chromium reduction.

Mineralogical study of zard koh and kulli koh iron ore deposits of pakistan

International Nuclear Information System (INIS)

Khoso, S.A.; Abro, M.I.

2017-01-01

Zard Koh and Kulli Koh are two recently discovered iron ore deposits, existing in the Chagai district, Balochistan, Pakistan. PSM (Pakistan Steel Mill Limited) is interested to utilize these ore deposits at priority. Purpose of the present study was to assess the mineralogy of the Zard Koh and Kulli Koh iron ore deposits, as it plays a vital role in the selection of an appropriate processing method. The mineralogical study of ore deposits was carried out by XRD (X-Ray Diffraction), XRF (X-Ray Fluorescence), SEM (Scanning Electron Microscope) attached with EDS (Energy Dispersive Spectroscope) and SM (Stereomicroscope) techniques. Results indicated that the Zard Koh ore is mainly composed of 60.15% maghemite, 23.57% pyrite, 4.07% chlorite, 10.30% grossular and 1.65% admontite minerals. The chemical analysis revealed that Zard Koh iron ore contains an average of 54.27% Fe, 12.73% S, 8.70% Si, 3.07% Al, 4.07% Ca, and 2.16% Mg. Similarly, the mineralogical study of the Kulli Koh iron ore indicated that, ore is containing 51.16% hematite, 29.24% quartz, 8.89% dravite, and 8.76% kaolinite minerals. Elemental analysis of different samples indicated that Kulli Koh iron ore contains an average composition of 40.23% Fe, 20.67% Si, 3.44% Ca, 3.81% Al and 3.25% Mg. Mineralogical study of the Zard Koh and Kulli Koh iron ore deposits suggested that these ore deposits can be beneficiated costeffectively by using magnetic separation techniques. (author)

Experimental microcosm study of the effects of Deepwater Horizon MC-252 oil on the geochemistry and microbiology of Gulf Coast sediment

Science.gov (United States)

Donahoe, R. J.; Bej, A.; Raulerson, A.; Rentschler, E. K.

2011-12-01

Microcosm experiments were conducted to examine the impact of oil contamination on Gulf Coast sediment geochemistry and microbial population dynamics. Coastal sediment and seawater were collected from a salt marsh at Bayou la Batre, Alabama, which was not severely impacted by the BP Deepwater Horizon accident of April 2010. Sediment/seawater microcosms were set up in glass jars combusted for 5 hours at 450 degrees C. Non-sterile microcosms spiked with 500 ppm of MC-252 oil were sacrificed in duplicate at various time intervals over a 14 day period to establish a data time series. Sterile controls with and without oil and a non-sterile control without oil were sacrificed in duplicate at 14 days for comparison with the time-series experiments. Solid and aqueous phases were separated by centrifugation and prepared for analysis. Sediment mineralogy was determined using X-ray diffraction and acid-extractable sediment chemistry determined using EPA Method 3051A and ICP-OES analysis. The aqueous phase chemistry was analyzed by ICP-OES and ion chromatography. The mineralogy of the salt marsh sediment is predominantly quartz, but includes reactive phases such as clays (smectite, illite), feldspar, and iron oxide. Iron-bearing clays and iron oxides can serve as electron acceptors for the growth of Fe(III)-reducing bacteria. Microwave digestions of the microcosm substrate samples were performed in triplicate and show no significant variation in major element chemistry over the course of the two week experiment, suggesting that observed temporal trends in aqueous geochemistry may be due to ion exchange processes, rather than mineral dissolution reactions. Microcosm substrate trace element data which indicate possible differences with time are being analyzed for statistical significance. Analysis of aqueous solution geochemistry reveals several interesting temporal trends. Iron and manganese were released to solution after 2 days, suggesting the presence of facultative

Sediment transport dynamics in steep, tropical volcanic catchments

Science.gov (United States)

Birkel, Christian; Solano Rivera, Vanessa; Granados Bolaños, Sebastian; Brenes Cambronero, Liz; Sánchez Murillo, Ricardo; Geris, Josie

2017-04-01

How volcanic landforms in tropical mountainous regions are eroded, and how eroded materials move through these mostly steep landscapes from the headwaters to affect sediment fluxes are critical to water resources management in their downstream rivers. Volcanic landscapes are of particular importance because of the short timescales (transform. Owing to volcanism and seismic activity, landslides and other mass movements frequently occur. These processes are amplified by high intensity precipitation inputs resulting in significant, but natural runoff, erosion and sediment fluxes. Sediment transport is also directly linked to carbon and solute export. However, knowledge on the sediment sources and transport dynamics in the humid tropics remains limited and their fluxes largely unquantified. In order to increase our understanding of the dominant erosion and sediment transport dynamics in humid tropical volcanic landscapes, we conducted an extensive monitoring effort in a pristine and protected (biological reserve Alberto Manuel Brenes, ReBAMB) tropical forest catchment (3.2 km2), located in the Central Volcanic Cordillera of Costa Rica (Figure 1A). Typical for tropical volcanic and montane regions, deeply incised V-form headwaters (Figure 1B) deliver the majority of water (>70%) and sediments to downstream rivers. At the catchment outlet (Figure 1C) of the San Lorencito stream, we established high temporal resolution (5min) water quantity and sediment monitoring (turbidity). We also surveyed the river network on various occasions to characterize fluvial geomorphology including material properties. We could show that the rainfall-runoff-sediment relationships and their characteristic hysteresis patterns are directly linked to variations in the climatic input (storm intensity and duration) and the size, form and mineralogy of the transported material. Such a relationship allowed us to gain the following insights: (i) periodic landslides contribute significant volumes of

Mineralogy of Tailings Dump around Selebi Phikwe Nickel-Copper ...

African Journals Online (AJOL)

This study aimed at mineralogically characterizing the tailings dump emanating from the mining and smelting of nickel-copper (Ni-Cu) at Selebi Phikwe, Botswana, Southern Africa. Samples of tailings dump around the Selebi Phikwe Ni-Cu plant were studied using petrographic microscopy and X-ray Powder Diffraction ...

Quick, Easy, and Economic Mineralogical Studies of Flooded Chalk for EOR Experiments Using Raman Spectroscopy

Directory of Open Access Journals (Sweden)

Laura Borromeo

2018-05-01

Full Text Available Understanding the chalk-fluid interactions and the associated mineralogical and mechanical alterations on a sub-micron scale are major goals in Enhanced Oil Recovery. Mechanical strength, porosity, and permeability of chalk are linked to mineral dissolution that occurs during brine injections, and affect the reservoir potential. This paper presents a novel “single grain” methodology to recognize the varieties of carbonates in rocks and loose sediments: Raman spectroscopy is a non-destructive, quick, and user-friendly technique representing a powerful tool to identify minerals down to 1 µm. An innovative working technique for oil exploration is proposed, as the mineralogy of micron-sized crystals grown in two flooded chalk samples (Liége, Belgium was successfully investigated by Raman spectroscopy. The drilled chalk cores were flooded with MgCl2 for ca. 1.5 (Long Term Test and 3 years (Ultra Long Term Test under North Sea reservoir conditions (Long Term Test: 130 °C, 1 PV/day, 9.3 MPa effective stress; Ultra Long Term Test: 130 °C, varying between 1–3 PV/day, 10.4 MPa effective stress. Raman spectroscopy was able to identify the presence of recrystallized magnesite along the core of the Long Term Test up to 4 cm from the injection surface, down to the crystal size of 1–2 µm. In the Ultra Long Term Test core, the growth of MgCO3 affected nearly the entire core (7 cm. In both samples, no dolomite or high-magnesium calcite secondary growth could be detected when analysing 557 and 90 Raman spectra on the Long and Ultra Long Term Test, respectively. This study can offer Raman spectroscopy as a breakthrough tool in petroleum exploration of unconventional reservoirs, due to its quickness, spatial resolution, and non-destructive acquisition of data. These characteristics would encourage its use coupled with electron microscopes and energy dispersive systems or even electron microprobe studies.

Mineralogy and Oxygen Isotope Compositions of an Unusual Hibonite-Perovskite Refractory Inclusion from Allende

Science.gov (United States)

Keller, L. P.; Snead, C.; Rahman, Z.; McKeegan, K. D.

2012-01-01

Hibonite-rich Ca- and Al-rich inclusions (CAIs) are among the earliest formed solids that condensed in the early nebula. We discovered an unusual refractory inclusion from the Allende CV3 chondrite (SHAL) containing an approx 500 micron long single crystal of hibonite and co-existing coarse-grained perovskite. The mineralogy and petrography of SHAL show strong similarities to some FUN inclusions, especially HAL. Here we report on the mineralogy, petrography, mineral chemistry and oxygen isotopic compositions in SHAL.

Relação entre o alumínio extraível com KCl e oxalato de amônio e a mineralogia da fração argila, em solos ácidos brasileiros

Directory of Open Access Journals (Sweden)

Gabriel Octávio de Mello Cunha

2014-10-01

Full Text Available Em solos ácidos de ambiente mais tropical com esmectitas, assim como em solos altamente tamponados de ambiente subtropical, contendo esmectita com hidroxi-Al entrecamadas (EHE e, ou, vermiculita com hidroxi-Al entrecamadas (VHE, os teores de Al-KCl podem ser excepcionalmente altos; entretanto, em alguns casos não se manifestam efeitos fitotóxicos do elemento nas culturas. O Al "trocável" é tradicionalmente quantificado no extrato da solução de KCl 1 mol L-1 (Al-KCl, mas nem sempre esse elemento provém unicamente de formas trocáveis. Este trabalho objetivou investigar relações entre o Al extraído com solução de KCl e de oxalato de amônio com a mineralogia da fração argila. A quantificação do Al nos extratos de KCl e oxalato de amônio foi feita, respectivamente, por titulação com NaOH 0,02 mol L-1 padronizado e por espectrofotometria de absorção atômica. Foram utilizadas amostras de dois horizontes (A e B de 12 perfis de solo de cinco estados brasileiros (AC, PE, BA, RS e SC, com diferentes características mineralógicas, todos com teores de Al-KCl superior a 4 cmol c kg-1 no horizonte B. Dois perfis de SC (Rancho Queimado e Curitibanos, com níveis mais baixos de Al-KCl, foram incluídos para comparação. Os altos teores de Al-KCl evidenciaram-se relacionados com a mineralogia dos solos estudados. Nos solos ácidos com mais esmectitas, drenagem moderada ou imperfeita e oscilação do lençol freático houve evidências morfológicas, confirmadas pelas análises mineralógicas, de que no clima atual ocorre um processo de destruição de argilas, liberando Al que precipita como compostos amorfos. A alta concentração salina da solução de KCl dissolve parcialmente tais compostos, superestimando as formas trocáveis desse elemento, principalmente nos horizontes subsuperficiais. Nos solos ácidos do ambiente subtropical, os teores de Al-KCl também foram altos, embora com valores mais baixos do que nos com predomínio de

Sensitivity analysis of alkaline plume modelling: influence of mineralogy

International Nuclear Information System (INIS)

Gaboreau, S.; Claret, F.; Marty, N.; Burnol, A.; Tournassat, C.; Gaucher, E.C.; Munier, I.; Michau, N.; Cochepin, B.

2010-01-01

Document available in extended abstract form only. In the context of a disposal facility for radioactive waste in clayey geological formation, an important modelling effort has been carried out in order to predict the time evolution of interacting cement based (concrete or cement) and clay (argillites and bentonite) materials. The high number of modelling input parameters associated with non negligible uncertainties makes often difficult the interpretation of modelling results. As a consequence, it is necessary to carry out sensitivity analysis on main modelling parameters. In a recent study, Marty et al. (2009) could demonstrate that numerical mesh refinement and consideration of dissolution/precipitation kinetics have a marked effect on (i) the time necessary to numerically clog the initial porosity and (ii) on the final mineral assemblage at the interface. On the contrary, these input parameters have little effect on the extension of the alkaline pH plume. In the present study, we propose to investigate the effects of the considered initial mineralogy on the principal simulation outputs: (1) the extension of the high pH plume, (2) the time to clog the porosity and (3) the alteration front in the clay barrier (extension and nature of mineralogy changes). This was done through sensitivity analysis on both concrete composition and clay mineralogical assemblies since in most published studies, authors considered either only one composition per materials or simplified mineralogy in order to facilitate or to reduce their calculation times. 1D Cartesian reactive transport models were run in order to point out the importance of (1) the crystallinity of concrete phases, (2) the type of clayey materials and (3) the choice of secondary phases that are allowed to precipitate during calculations. Two concrete materials with either nanocrystalline or crystalline phases were simulated in contact with two clayey materials (smectite MX80 or Callovo- Oxfordian argillites). Both

Bioleaching of two different genetic types of chalcopyrite and their comparative mineralogical assessment.

Science.gov (United States)

Deng, Sha; Gu, Guohua; Ji, Jing; Xu, Baoke

2018-02-01

The bioleaching of two different genetic types of chalcopyrite by the moderate thermophile Sulfobacillus thermosulfidooxidans was investigated by leaching behaviors elucidation and their comparative mineralogical assessment. The leaching experiment showed that the skarn-type chalcopyrite (STC) revealed a much faster leaching rate with 33.34% copper extracted finally, while only 23.53% copper was bioleached for the porphyry-type chalcopyrite (PTC). The mineralogical properties were analyzed by XRD, SEM, XPS, and Fermi energy calculation. XRD indicated that the unit cell volume of STC was a little larger than that of PTC. SEM indicated that the surface of STC had more steps and ridges. XPS spectra showed that Cu(I) was the dominant species of copper on the surfaces of the two chalcopyrite samples, and STC had much more copper with lower Cu 2p 3/2 binding energy. Additionally, the Fermi energy of STC was much higher than that of PTC. These mineralogical differences were in good agreement with the bioleaching behaviors of chalcopyrite. This study will provide some new information for evaluating the oxidation kinetics of chalcopyrite.

Mineralogical composition changes of postagrogenic soils under different plant communities.

Science.gov (United States)

Churilin, Nikita; Chizhikova, Natalia; Varlamov, Evgheni; Churilina, Alexandra

2017-04-01

Plant communities play the leading role in transformation of soil. The need of studying former arable lands increases due to large number of abandoned lands in Russia. It is necessary to study mineralogical composition of soils involved into natural processes to understand the trends of their development after agricultural activities in the past. The aim of the study is to identify changes in mineralogical composition of soils under the influence of different plant communities. Soils were sampled in the south of Arkhangelsk region, Ustyansky district, near Akichkin Pochinok village. Soils are formed on clay moraine of Moscow glaciation. Soil profiles were dug on interfluve. We selected 4 plant communities on different stages of succession: upland meadow with domination of sod grasses (Phleum pratense, Agrostis tenuis), 16-year-old birch forest where dominants are herbaceous plants such as Poa sp., Chamerion angustiflium, Agrostis tenuis, 16-year-old spruce forest with no herbaceous vegetation and 70-year-old bilberry spruce forest with domination of Vaccinium myrtillus and Vaccinium vitis-idaea. To separate soil fractions mineral content. We noticed a clear differentiation of studied soils both in the content of fraction and composition of minerals. Mineralogical composition and major mineral phases correlation of profiles under 70 years and 16 years of spruce forests are different. Mineralogical content in upper part of profile under the young spruce is more differentiated than in old spruce forest: the amount of quartz and kaolinite increases in upper horizon, although in this case the overall pattern of profile formation of clay material during podzolization remains unchanged. There is more substantial desilting under the birch forest, compared with profile under the spruce of same age within top 50 cm. Under the meadow vegetation we've discovered differentiation in mineral composition. Upper horizons contain smectite phase and differ from the underlying

Varves in lake sediments - a review

Science.gov (United States)

Zolitschka, Bernd; Francus, Pierre; Ojala, Antti E. K.; Schimmelmann, Arndt

2015-06-01

Downcore counting of laminations in varved sediments offers a direct and incremental dating technique for high-resolution climatic and environmental archives with at least annual and sometimes even seasonal resolution. The pioneering definition of varves by De Geer (1912) had been restricted to rhythmically deposited proglacial clays. One century later the meaning of 'varve' has been expanded to include all annually deposited laminae in terrestrial and marine settings. Under favourable basin configurations and environmental conditions, limnic varves are formed due to seasonality of depositional processes from the lake's water column and/or transport from the catchment area. Subsequent to deposition of topmost laminae, the physical preservation of the accumulating varved sequence requires the sustained absence of sediment mixing, for example via wave action or macrobenthic bioturbation. Individual (sub)laminae in varved lake sediments typically express contrasting colours, always differ in terms of their organic, chemical and/or mineralogical compositions, and often also differ with regard to grain-size. Various predominating climatic and depositional conditions may result in clastic, biogenic or endogenic (incl. evaporitic) varved sediments and their mixtures. To reliably establish a varve chronology, the annual character of laminations needs to be determined and verified in a multidisciplinary fashion. Sources and influences of possible errors in varve chronologies are best determined and constrained by repeated varve counts, and by including radioisotopes and correlation with historically documented events. A well-established varve chronology greatly enhances the scientific value of laminated limnic archives by securely anchoring the wealth of multi-proxy palaeoenvironmental information in the form of time-series for multidisciplinary investigations. Applications of varved records are discussed with special reference to advances since the 1980s. These span fields

Petrographic and sedimentological characteristics of drift sediments from the radiotracer experiment array at Drigg, Cumbria

International Nuclear Information System (INIS)

Milodowski, A.E.

1990-11-01

A detailed petrographic, mineralogical and sedimentological study has been made of five drift sediment cores taken from shallow boreholes at Drigg, Cumbria, forming part of the British Geological Survey's migration test borehole array. The cores correspond to the aquifer in which tests are undertaken. The study shows that several discrete units can be recognised within the aquifer but that these may vary laterally by a considerable amount over short distances. The sands and silts comprising the aquifer zone are generally finely laminated and show an upwards coarsening of grain size. They are interpreted as proximal glacial sediments, possibly having been deposited in a lake or ponded basin. Petrographic analysis shows that most of the porosity is lined by detrital ferruginous illitic clay which coats the sand grains. Some evidence of feldspar dissolution is identified. Pyrite is also present as an important detrital component. In the upper part of the aquifer the pyrite has been largely oxidised to form secondary ferric oxide compounds. However, pyrite increases in abundance with depth and its preservation may reflect a variation in redox across the aquifer. (author)

Hydrogeochemical and stream sediment reconnaissance basic data for Watertown NTMS Quadrangle, South Dakota; Minnesota

International Nuclear Information System (INIS)

1981-01-01

Results of a reconnaissance geochemical survey of the Watertown Quadrangle are reported. Field and laboratory data are presented for 711 groundwater and 603 stream sediment samples. Statistical and areal distributions of uranium and possible uranium-related variables are displayed. A generalized geologic map of the survey area is provided, and pertinent geologic factors which may be of significance in evaluating the potential for uranium mineralization are briefly discussed. Groundwater data indicate that high uranium concentrations are derived predominantly from glacial aquifers of variable water composition located on the Coteau des Prairies. Elements associated with high uranium values in these waters include barium, calcium, copper, iron, magnesium, selenium, sulfate, and total alkalinity. Low uranium values were observed in waters originating from the Cretaceous Dakota sandstone whose water chemistry is characterized by high concentrations of boron, sodium, and chloride. Stream sediment data indicate that high uranium concentrations are scattered across the glacial deposits of the Coteau des Prairies. A major clustering of high uranium values occurs in the eastern portion of the glaciated quadrangle and is associated with high concentrations of selenium, lithium, iron, arsenic, chromium, and vanadium. The sediment data suggest that the drift covering the Watertown Quadrangle is compositionally homogeneous, although subtle geochemical differences were observed as a result of localized contrasts in drift source-rock mineralogy and modification of elemental distributions by contemporaneous and postglacial hydrologic processes

Mineralogical impact on long-term patterns of soil nitrogen and phosphorus enzyme activities

Science.gov (United States)

Mikutta, Robert; Turner, Stephanie; Meyer-Stüve, Sandra; Guggenberger, Georg; Dohrmann, Reiner; Schippers, Axel

2014-05-01

Soil chronosequences provide a unique opportunity to study microbial activity over time in mineralogical diverse soils of different ages. The main objective of this study was to test the effect of mineralogical properties, nutrient and organic matter availability over whole soil pro-files on the abundance and activity of the microbial communities. We focused on microbio-logical processes involved in nitrogen and phosphorus cycling at the 120,000-year Franz Josef soil chronosequence. Microbial abundances (microbial biomass and total cell counts) and enzyme activities (protease, urease, aminopeptidase, and phosphatase) were determined and related to nutrient contents and mineralogical soil properties. Both, microbial abundances and enzyme activities decreased with soil depth at all sites. In the organic layers, microbial biomass and the activities of N-hydrolyzing enzymes showed their maximum at the intermediate-aged sites, corresponding to a high aboveground biomass. In contrast, the phosphatase activity increased with site age. The activities of N-hydrolyzing enzymes were positively correlated with total carbon and nitrogen contents, whereas the phosphatase activity was negatively correlated with the phosphorus content. In the mineral soil, the enzyme activities were generally low, thus reflecting the presence of strongly sorbing minerals. Sub-strate-normalized enzyme activities correlated negatively to clay content as well as poorly crystalline Al and Fe oxyhydroxides, supporting the view that the evolution of reactive sec-ondary mineral phases alters the activity of the microbial communities by constraining sub-strate availability. Our data suggest a strong mineralogical influence on nutrient cycling par-ticularly in subsoil environments.

Mineralogical Study of Zard Koh and Kulli Koh Iron Ore Deposits of Pakistan

Directory of Open Access Journals (Sweden)

SULTAN AHMED KHOSO

2017-10-01

Full Text Available Zard Koh and Kulli Koh are two recently discovered iron ore deposits, existing in the Chagai district, Balochistan, Pakistan. PSM (Pakistan Steel Mill Limited is interested to utilize these ore deposits at priority. Purpose of the present study was to assess the mineralogy of the Zard Koh and Kulli Koh iron ore deposits, as it plays a vital role in the selection of an appropriate processing method. The mineralogical study of ore deposits was carried out by XRD (X-Ray Diffraction, XRF (X-Ray Fluorescence, SEM (Scanning Electron Microscope attached with EDS (Energy Dispersive Spectroscope and SM (Stereomicroscope techniques. Results indicated that the Zard Koh ore is mainly composed of 60.15% maghemite, 23.57% pyrite, 4.07% chlorite, 10.30% grossular and 1.65% admontite minerals. The chemical analysis revealed that Zard Koh iron ore contains an average of 54.27% Fe, 12.73% S, 8.70% Si, 3.07% Al, 4.07% Ca, and 2.16% Mg. Similarly, the mineralogical study of the Kulli Koh iron ore indicated that, ore is containing 51.16% hematite, 29.24% quartz, 8.89% dravite, and 8.76% kaolinite minerals. Elemental analysis of different samples indicated that Kulli Koh iron ore contains an average composition of 40.23% Fe, 20.67% Si, 3.44% Ca, 3.81% Al and 3.25% Mg. Mineralogical study of the Zard Koh and Kulli Koh iron ore deposits suggested that these ore deposits can be beneficiated costeffectively by using magnetic separation techniques.

Mineralogy of selected sedimentary interbeds at or near the Idaho National Engineering Laboratory, Idaho

International Nuclear Information System (INIS)

Reed, M.F.; Bartholomay, R.C.

1994-08-01

The US Geological Survey's (USGS) Project Office at the Idaho National Engineering Laboratory (INEL) analyzed 66 samples from sedimentary interbed cores during a 38-month period beginning in October 1990 to determine bulk and clay mineralogy. These cores had been collected from 19 sites in the Big Lost River Basin, 2 sites in the Birch Creek Basin, and 1 site in the Mud Lake Basin, and were archived at the USGS lithologic core library at the INEL. Mineralogy data indicate that core samples from the Big Lost River Basin have larger mean and median percentages of quartz, total feldspar, and total clay minerals, but smaller mean and median percentages of calcite than the core samples from the Birch Creek Basin. Core samples from the Mud Lake Basin have abundant quartz, total feldspar, calcite, and total clay minerals. Identification of the mineralogy of the Snake River Plain is needed to aid in the study of the hydrology and geochemistry of subsurface waste disposal

Mineralogy and geochemistry of bauxite and bentonite deposits from Mozambique

NARCIS (Netherlands)

Dos Muchangos, A.C.

2000-01-01

Results of mineralogical and geochemical studies of bauxites, kaolinitic clays and bentoniteS from Mozambique are presented in this thesis. The bauxite and kaolinitic clay deposits in Penhalonga area (in the central western part of Mozambique) are associated with Precambrian magmatic rocks and

Mineralogical Composition of Urinary Stones and Their Frequency in Patients: Relationship to Gender and Age

Directory of Open Access Journals (Sweden)

Behnam Keshavarzi

2016-12-01

Full Text Available This investigation reports the mineralogy and possible pathological significance of urinary stones removed from patients in Fars province, Iran. X-ray diffraction (XRD, scanning electron microscopy (SEM and polarizing microscope (PM techniques were used to investigate the mineralogical compositions of urinary stones. The identified mineral components include whewellite, weddellite, hydroxyapatite, uricite and cystine. These techniques revealed that the whewellite and uricite were the most common mineral phases. Platy-like/monoclinic whewellite, prismatic/monoclinic uric acid and hexagonal cystine crystals were revealed by SEM. Biominerals (calcium carbonate and quartz were also identified in PM images. Of the variables determining the type of precipitated minerals, the effects of pH on depositional conditions proved to be the most apparent parameter, as shown by occurrences and relationships among the studied minerals. Our results revealed the importance of detailed knowledge of mineralogical composition in assessing the effects of age and sex. The highest incidence of urinary stones was observed in the 40–60 age group. Calcium oxalate and uric acid stones are more frequent in men than women. Finally, the study concluded that knowledge of the mineralogical composition of urinary stones is important as it helps the scientific community to explain the chemistry and the etiology of the calculi in the urinary system.

Natural radioactivity of Loire river sediments: relations with the lithology

International Nuclear Information System (INIS)

Patryl, L.

2000-01-01

This study has been carried out on request of the Loire-Bretagne water agency by the Laboratory of geology of Tours univ. (EA2100 GeEAC) in collaboration with CEA-Le Ripault. The main objective was the study of the nature and distribution of natural radioactivity in the Loire river alluvial deposits, its origin in the rocks of the surrounding basins and its links with the alluvial petrography. The radioactive flux linked with the sediments of the bottom of the river has been also determined. The Loire river and its main affluents have been the object of radiological and petrographic analyses (grain size, sands and clays mineralogy, organic matter content). The average radioactivities of 40 K, 238 U and 228 Ac in the alluvial deposits are 934.3 ± 164.7 Bq.kg -1 , 50.6 ± 30.8 Bq.kg -1 and 28.8 ± 18.1 Bq.kg -1 , respectively. The average radioactivity of 238 U, 228 Ac and their daughter products is statistically higher in Loire superieure (Massif Central mounts) than in Loire moyenne (Paris basin). The activities of 238 U and 228 Ac are mainly influenced by the grain size of the alluvial deposits and by the mineralogical composition of the sand fraction. The alluvial deposits are mainly sandy and the coarse fraction is the most abundant. The primary radioactivity is carried by the few zircons of the sediments. The activity of the uranium and thorium families increase with the feldspars content. The fixation of radioactivity seems to be linked with the presence of clay minerals inside the weathered feldspar grains which are abundant in the sands. The radioactivity of the Loire river alluvial deposits shows no important changes with respect to the substratums because of a smoothing due to the predominance of longitudinal fluxes with respect to the lateral ones. The impact of an old uranium mine on the alluvial deposits of the Besbre river is detectable along about a tenth of km s downstream only. Because of the strong variations of radioactivity with granularity, a

137Cs distribution and geochemistry of Lena River (Siberia) drainage basin lake sediments

International Nuclear Information System (INIS)

Johnson-Pyrtle, A.; Scott, M.R.; Laing, T.E.; Smol, J.P.

2000-01-01

The Lena River is the second largest river that discharges into the Arctic Ocean. It is therefore important to determine not only the direct impact its discharge has on the 137Cs concentration of the Arctic, but also the potential its drainage basin has as a 137Cs source. 137Cs surface sediment concentrations and inventory values, which range from 4.97 to 338 Bq kg -1 and 357 to 1732 Bq m -2 , respectively, were determined for the Lena River drainage basin lake samples, via gamma analysis. The average geochemical and mineralogical composition of a subset of samples was also determined using neutron activation analysis, X-ray diffraction and X-ray fluorescence spectrometry techniques. Results of these geochemical analyses allowed for the identification of key geochemical factors that influence the distribution of 137Cs in the Lena River drainage basin. 137Cs profiles indicate that Lena River drainage basin lacustrine sediments serve as a record of 137Cs fallout. Based on the downcore 137Cs, %illite, %smectite, %Al and %Mn distribution patterns, it was concluded that a small fraction of non-selectively bound 137Cs was remobilized at depth in some cores. Inconsistencies between the actual 137Cs fallout record and the 137Cs profiles determined for the lake sediments were attributed to 137Cs remobilization in subsurface sediments. In addition to establishing the agreement between the global atmospheric fallout record and the downcore 137Cs distribution patterns determined for these sediments, results indicate that 137Cs deposited during periods of maximum atmospheric release was buried and is not susceptible to surface erosion processes. However, mean 137Cs concentrations of the lacustrine surface sediments (125 Bq kg -1 ) are still significantly higher than those of the nearby Lena River estuary (11.22 Bq kg -1 ) and Laptev Sea (6.00 Bq kg -1 ). Our study suggests that the Lena River drainage basin has the potential to serve as a source of 137Cs to the adjacent Arctic

Mineralogy of the Martian Surface: Crustal Composition to Surface Processes

Science.gov (United States)

Mustard, John F.

1999-01-01

Over the course of this award we have: 1) Completed and published the results of a study of the effects of hyperfine particles on reflectance spectra of olivine and quartz, which included the development of scattering codes. Research has also progressed in the analysis of the effects of fine particle sizes on clay spectra. 2) Completed the analysis of the mineralogy of dark regions, showed the insitu compositions are highly correlated to the SNC meteorites, and determined that the martian mantle was depleted in aluminum prior to 2-3 GA ago; Studies of the mineralogic heterogeneity of surficial materials on Mars have also been conducted. and 3) Performed initial work on the study of the physical and chemical processes likely to form and modify duricrust. This includes assessments of erosion rates, solubility and transport of iron in soil environments, and models of pedogenic crust formation.

Mineralogic Residence and Desorption Rates of Sorbed 90Sr in Contaminated Subsurface Sediments: Implications to Future Behavior and In-Ground Stability

International Nuclear Information System (INIS)

PIs: John M. Zachara; Jim P. McKinley; S. M. Heald; Chongxuan Liu; Peter C. Lichtner

2006-01-01

The project is investigating the adsorption/desorption process of 90Sr in coarse-textured pristine and contaminated Hanford sediment with the goal to define a generalized reaction-based model for use in reactive transport calculations. While it is known that sorbed 90Sr exists in an ion exchangeable state, the mass action relationships that control the solid-liquid distribution and the mineral phases responsible for adsorption have not been defined. Many coarse-textured Hanford sediment display significant sorptivity for 90Sr, but contain few if any fines that may harbor phyllosilicates with permanent negative charge and associated cation exchange capacity. Moreover, it is not known whether the adsorption-desorption process exhibits time dependence within context of transport, and if so, the causes for kinetic behavior

Composition And Characteristic Of The Surficial Sediments In The Southern Corniche Of Jeddah, Red Sea Coast

Directory of Open Access Journals (Sweden)

Talha A Al-Dubai

2017-03-01

Full Text Available This work discusses the composition and characteristic of the surficial sediments in the southern corniche of Jeddah, Saudi Red Sea coast, in an attempt to infer the surficial distribution pattern of minerals and provenance of sediments. Twenty-six superficial sediments samples were collected from backreef and forereef areas and were analyzed for grain size, CaCO3 content, and mineralogy. The textural of grain size range from gravel to mud fraction. The mud-dominated substrates (<63 µm occur generally in the back-reef area near the shoreline (sheltered area and in the lagoon. Gravel rich-sediments are mostly found in forereef regions. The highest content of aragonite and Mg-calcite occur in the forereef area, probably because to suitability the forereef region for chemical and biochemical precipitation of these minerals. High Mg-calcite and Dolomite are low in both the regions. The pyrite occurs in lagoon; this indicates the reductive conditions in this part. However, on the contrary the percentage of carbonate minerals were low in the backreef-flat area, which could be attributed to the supply of non-carbonate terrigenous materials. The terrigenous material contains quartz, k-feldspar, plagioclase and amphibole minerals and are dominant in backreef-flat area with averages of 12.7%, 7.13%, 2.93% and 0.65%, respectively. Their abundance could be attributed to the supply of terrigenous materials by Aeolian deposits and intermittent Wadis.

Characterization of Archaeological Sediments Using Fourier Transform Infrared (FT-IR) and Portable X-ray Fluorescence (pXRF): An Application to Formative Period Pyro-Industrial Sites in Pacific Coastal Southern Chiapas, Mexico.

Science.gov (United States)

Neff, Hector; Bigney, Scott J; Sakai, Sachiko; Burger, Paul R; Garfin, Timothy; George, Richard G; Culleton, Brendan J; Kennett, Douglas J

2016-01-01

Archaeological sediments from mounds within the mangrove zone of far-southern Pacific coastal Chiapas, Mexico, are characterized in order to test the hypothesis that specialized pyro-technological activities of the region's prehistoric inhabitants (salt and ceramic production) created the accumulations visible today. Fourier transform infrared spectroscopy (FT-IR) is used to characterize sediment mineralogy, while portable X-ray fluorescence (pXRF) is used to determine elemental concentrations. Elemental characterization of natural sediments by both instrumental neutron activation analysis (INAA) and pXRF also contribute to understanding of processes that created the archaeological deposits. Radiocarbon dates combined with typological analysis of ceramics indicate that pyro-industrial activity in the mangrove zone peaked during the Late Formative and Terminal Formative periods, when population and monumental activity on the coastal plain and piedmont were also at their peaks. © The Author(s) 2015.

The postglacial Stuoragurra Fault, North Norway - A textural and mineralogical study.

Science.gov (United States)

Roaldset, E.

2012-04-01

The postglacial Stuoragurra Fault, North Norway - A textural and mineralogical study Elen Roaldset(1), Mari Åm (2), and Oddleiv Olesen(3) 1) Natural History Museum, University of Oslo, P.O.Box 1172 Blindern, 0318 Oslo, Norway 2) Statoil R &D, P. O. Box 2470, 7005 Trondheim, Norway 3) Norwegian Geological Survey, P.O.Box 6315 Sluppen, 7491 Trondheim, Norway The Stuoragurra Fault is part of the Lapland province of postglacial faults and was identified in 1983 during a colloborative project between the Geological Surveys of Finland Norway and Sweden. The Stuoragurra Fault is an 80 km long fault zone which contains three main segments of eastward dipping faults (30-55 deg.) with up to 10 m of reverse displacement and a 7 m high escarpment. It cross-cuts glaciofluvial deposits and consequently being younger than 10.000 years. The postglacial fault segments follow to a large extent older fault zones represented by lithified breccias and diabases of Proterozoic age. In this paper we will present textural and mineralogical study of a 135 m continous core drilled across the fault zone. The investigation methods include quality assessments by rock quality designation methods (RQD and Q- methods), textural and petrological descriptions visually and by thin section microscopy, and mineralogical analysis by X-ray diffraction. Special attention is drawn to neoformed and/or degraded minerals like clay minerals and iron oxides/hydroxides. The quality assessments of the cored material reflect the degree of rock deformation and fragmentation and show the quality of the bedrock generally to be of very poor (about 60%) to poor quality" (25%) The main minerals in the fresh rock are quarts, feldspar, mica and iron oxides (magnetite and ilmenite). Throughout the cored borehole products of weathering have formed on fissures, fractures and in strongly deformed, gravelly, zones. The neoformed minerals include kaolinite, smectite, and vermiculite, as well as goethite. The mineralogical

Mineralogy of Interplanetary Dust Particles from the Comet Giacobini-Zinner Dust Stream Collections

Science.gov (United States)

Nakamura-Messenger, K.; Messenger, S.; Westphal, A. J.; Palma, R. L.

2015-01-01

The Draconoid meteor shower, originating from comet 21P/Giacobini-Zinner, is a low-velocity Earth-crossing dust stream that had a peak anticipated flux on Oct. 8, 2012. In response to this prediction, NASA performed dedicated stratospheric dust collections to target interplanetary dust particles (IDPs) from this comet stream on Oct 15-17, 2012 [3]. Twelve dust particles from this targeted collection were allocated to our coordinated analysis team for studies of noble gas (Univ. Minnesota, Minnesota State Univ.), SXRF and Fe-XANES (SSL Berkeley) and mineralogy/isotopes (JSC). Here we report a mineralogical study of 3 IDPs from the Draconoid collection..

A new Spanish meteorite: Retuerta del Bullaque (Ciudad Real). Classification, mineralogy and preservation of the morphology; Un nuevo meteorito espanol: Retuerta del Bullaque (Ciudad Real). Clasificacion, mineralogia y preservacion de la morfologia

Energy Technology Data Exchange (ETDEWEB)

Lozano, R. P.; Reyes, J.; Baeza, E.; Gonzalez Laguna, R.; Gutierrez-Marco, R.; Jimenez Martinez, R.

2013-10-01

Retuerta del Bullaque is a new Spanish iron meteorite. Found in 1980, has been recovered from the Province of Ciudad Real, near the northern limit of the Cabaneros National Park (39 degree centigrade 27 min 32 s N, 4 degree centigrade 22 min 39 s W). The specimen is a coarse octahedrite of about 100 kg in weight, with many concave regmaglyphes in one surface and moderate terrestrial weathering. The atmospheric heat-affected rim ({<=}1.5 mm) is partially preserved. Analysis by ICP-AES (Ni: 7.527 and Co: 0.475 in wt%) and by ICP-MS (Ga: 68.9, Ge: 365, As: 13.7, W: 0.95, Ir: 1.95 and Au: 1.70 in ppm) we used to classify the specimen as an IAB complex (Main Group). Chemically, Retuerta del Bullaque iron is similar to Kaalijarv iron but its mineralogy and texture are more like other low Ni-Au irons of main group (e.g. Diablo Canyon). The bulk of the specimen is a Wid-manstatten kamacite (band-width estimated at 2.0 {+-} 0.3 mm) with large and tabular crystals of cohenite and polygonal kamacite without cohenite that exhibits abundant Neumann lines. Schreibersite (irregular crystals + rhabdite) is rare in the two sectors. Taenite is present in thick lamellae between kamacite bands and pearlitic plessite. Lamellar cohenite is very abundant (9.5% of the total area into two sections 77.7 and 41.1 cm{sup 2}), is partially covered of schreibersite and contains kamacite-taenite spherules. The larger sections display irregularly shaped troilite-graphite nodules (max. size, 5-12 mm), located in the central areas of the kamacite polygonal sectors. Each nodule has a rim of schreibersite + cohenite. The original morphology of the specimen was preserved making replicas as molds and casts (using elastomers, resins and modified plasters) and a 3D-laser scan. (Author)

Benthic hypoxia and early diagenesis in the Black Sea shelf sediments

Science.gov (United States)

Plante, Audrey; Roevros, Nathalie; Capet, Arthur; Grégoire, Marilaure; Fagel, Nathalie; Chou, Lei

2017-04-01

Marine waters of semi-enclosed seas are affected by a major environmental issue which is oxygen depletion in bottom waters. Deoxygenation is one of the most widespread man-induced consequences which can be catastrophic for living species. Between 1970 and 1990, the benthic compartment of the Black Sea underwent modifications due to the occurrence and increase of hypoxia. Indeed, these changes might cause a deterioration of the structure and functioning of the ecosystems. Nowadays, some regions, such as the north-western shelf, are still affected seasonally by this phenomenon. Within the framework of the BENTHOX project, a biogeochemical study focusing on the early diagenesis is conducted in the Black Sea. It aims (1) to obtain a better understanding of the impact of benthic hypoxia on the diagenetic pathways, (2) to contribute to a new dataset of biogeochemical measurements in the sediments including porewaters. During a cruise (Emblas II - May 2016), on board the RV Mare Nigrum, sediment cores were taken at 4 stations on the Ukrainian shelf. Porewaters were extracted on board the ship using Rhizon technique under N2 atmosphere and will be analyzed for dissolved nutrients and major ions. In addition, sediments were sliced and will be determined for major solid phases and trace element contents. A multi-proxies (biological, sedimentological, mineralogical and geochemical) approach will be used to identify the hypoxic events and to reconstruct the history of bottom hypoxia. The results obtained will be presented and discussed with emphasis on the first outcomes and the major biogeochemical processes involved in the early diagenesis.

Mineralogy and pedogenesis in a soil chronosequence on a ...

African Journals Online (AJOL)

Studies on soils of the floodplain of lower Niger river are scanty although this floodplain forms a very important agricultural resource base in Nigeria. The objective of this study is to provide comprehensive information on the characteristics of the soils with respect to their mineralogy and the effect of seasonal flooding on their ...

Mineralogical behaviour of bentonites in open and closed systems

International Nuclear Information System (INIS)

Herbert, H.J.; Kasbohm, J.

2004-01-01

Mineralogical and chemical changes of bentonites were investigated in a natural analogue study and in laboratory experiments. As a working hypothesis we assumed that in geological, i.e. open systems, bentonites may be penetrated over geological time scales by larger water volumes than high compacted bentonites used as technical barriers in repositories in salt formations. Under this assumption open geological systems are characterised by low solid/liquid ratios and closed repository systems by high solid/liquid ratios. Consequently in laboratory experiments the mineralogical changes were investigated under different solid/liquid ratios and compared with results of a natural analogue study. In the natural analogue study in deep boreholes in the East Slovakian Basin the expandability of montmorillonite and the degree of transformation in illite-smectite (IS) mixed layer structures was found to be dependent not only on depth and temperature but also on the salinity of the pore waters. In this open geological system with a comparatively low solid/liquid ratio the observed changes in the montmorillonite were significantly different than those observed in the laboratory study on compacted MX-80 bentonite. (authors)

Sediment matrix characterization as a tool for evaluating the environmental impact of heavy metals in metal mining, smelting, and ore processing areas.

Science.gov (United States)

Ružičková, Silvia; Remeteiová, Dagmar; Mičková, Vladislava; Dirner, Vojtech

2018-02-21

In this work, the matrix characterization (mineralogy, total and local chemical composition, and total organic (TOC) and inorganic carbon (TIC) contents) of different types of sediments from mining- and metallurgy-influenced areas and the assessment of the impact of the matrix on the association of potentially hazardous metals with the mineral phases of these samples, which affect their mobility in the environment, are presented. For these purposes, sediment samples with different origins and from different locations in the environment were analyzed. Anthropogenic sediments from metal-rich post-flotation tailings (Lintich, Slovakia) represent waste from ore processing, natural river sediments from the Hornád River (Košice, Slovakia) represent areas influenced predominantly by the metallurgical industry, and lake sediments from a water reservoir Ružín (inflow from the Hornád and Hnilec Rivers, Slovakia) represent the impact of the metallurgical and/or mining industries. The total metal contents were determined by X-ray fluorescence (XRF) analysis, the local chemical and morphological microanalysis by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and the TOC and TIC contents by infrared (IR) spectrometry. The mobility/bioavailability of Cu, Pb, and Zn in/from sediments at the studied areas was assessed by ethylenediaminetetraacetic acid (EDTA) and acetic acid (AA) extraction and is discussed in the context of the matrix composition. The contents of selected potentially hazardous elements in the extracts were determined by the high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS).

Mineralogical and geochemical characterization of the Old Tailings Dam, Australia: Evaluating the effectiveness of a water cover for long-term AMD control

International Nuclear Information System (INIS)

Jackson, Laura M.; Parbhakar-Fox, Anita

2016-01-01

Establishing a shallow water cover over tailings deposited in a designated storage facility is one option to limit oxygen diffusion and retard oxidation of sulfides which have the potential to form acid mine drainage (AMD). The Old Tailings Dam (OTD) located at the Savage River mine, western Tasmania contains 38 million tonnes of pyritic tailings deposited from 1967 to 1982, and is actively generating AMD. The OTD was constructed on a natural gradient, resulting in sub-aerial exposure of the southern area, with the northern area under a natural water cover. This physical contrast allowed for the examination of tailings mineralogy and geochemistry as a function of water cover depth across the OTD. Tailings samples (n = 144, depth: ≤ 1.5 m) were collected and subjected to a range of geochemical and mineralogical evaluations. Tailings from the southern and northern extents of the OTD showed similar AMD potential based on geochemical (NAG pH range: 2.1 to 4.2) and bulk mineralogical parameters, particularly at depth. However, sulfide alteration index (SAI) assessments highlighted the microscale contrast in oxidation. In the sub-aerial zone pyrite grains are moderately oxidized to a depth of 0.3 m (maximum SAI of 6/10), under both gravel fill and oxidized covers, with secondary minerals (e.g., ferrihydrite and goethite) developed along rims and fractures. Beneath this, mildly oxidized pyrite is seen in fresh tailings (SAI = 2.9/10 to 5.8/10). In the sub-aqueous zone, the degree of pyrite oxidation demonstrates a direct relationship with cover depth, with unoxidized, potentially reactive tailings identified from 2.5 m, directly beneath an organic-rich sediment layer (SAI = 0 to 1/10). These findings are broadly similar to other tailings storage facilities e.g., Fox Lake, Sherritt-Gordon Zn−Cu mine, Canada and Stekenjokk mine, Sweden where water covers up to 2 m have successfully reduced AMD. Whilst geotechnical properties of the OTD restrict the extension

Application of radiometric analysis in the study of provenance and transport processes of Brazilian coastal sediments

International Nuclear Information System (INIS)

Carvalho, C.; Anjos, R.M.; Veiga, R.; Macario, K.

2011-01-01

Natural gamma radiation of beach sand deposits was measured along the south coast of Rio de Janeiro State, Brazil, with the aim of studying the provenance and transport processes of sediments in this area. Concentrations of thorium, uranium and potassium were evaluated using γ-ray spectrometry and a behavioral study of eTh/eU and eTh/K cross plots was performed, reflecting the mineralogical properties of beach sands, as well as their history of transport and sorting processes. The results show that such technique can be efficiently used to map heavy mineral distributions and to distinguish the different origins of coastal sediments disclosing the influence of nearby rivers. - Research highlights: → Based on the natural γ-ray analyses of beach sand, high concentrations of heavy minerals have been found around the Mambucaba River deltaic complex, located in the South of Rio de Janeiro State, Brazil. → Concentrations of thorium, uranium and potassium concentration can give information on the mineral composition and provenance of beach sands and consequently investigate heavy mineral deposits.

Application of radiometric analysis in the study of provenance and transport processes of Brazilian coastal sediments

Energy Technology Data Exchange (ETDEWEB)

Carvalho, C. [Laboratorio de Radioecologia (LARA), Instituto de Fisica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/no, Gragoata, 24210-346 Niteroi, RJ (Brazil); Anjos, R.M., E-mail: meigikos@if.uff.b [Laboratorio de Radioecologia (LARA), Instituto de Fisica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/no, Gragoata, 24210-346 Niteroi, RJ (Brazil); Veiga, R.; Macario, K. [Laboratorio de Radioecologia (LARA), Instituto de Fisica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/no, Gragoata, 24210-346 Niteroi, RJ (Brazil)

2011-02-15

Natural gamma radiation of beach sand deposits was measured along the south coast of Rio de Janeiro State, Brazil, with the aim of studying the provenance and transport processes of sediments in this area. Concentrations of thorium, uranium and potassium were evaluated using {gamma}-ray spectrometry and a behavioral study of eTh/eU and eTh/K cross plots was performed, reflecting the mineralogical properties of beach sands, as well as their history of transport and sorting processes. The results show that such technique can be efficiently used to map heavy mineral distributions and to distinguish the different origins of coastal sediments disclosing the influence of nearby rivers. - Research highlights: {yields} Based on the natural {gamma}-ray analyses of beach sand, high concentrations of heavy minerals have been found around the Mambucaba River deltaic complex, located in the South of Rio de Janeiro State, Brazil. {yields} Concentrations of thorium, uranium and potassium concentration can give information on the mineral composition and provenance of beach sands and consequently investigate heavy mineral deposits.

Consequences of land use and climate changes on sediment deposition in estuaries during the last centuries

Science.gov (United States)

Poirier, Clément; Chaumillon, Eric; Arnaud, Fabien; Goubert, Evelyne; Sauriau, Pierre-Guy; Caurant, Florence

2010-05-01

Estuaries are the downstream end-member of fluvial systems. They are experiencing high sedimentation rates, thus providing good opportunities for high resolution studies of Holocene environmental changes at the land/ocean interface. From a thorough literature survey, it appears that a rapid siltation and/or an increase in sedimentation rate were recorded in many estuarine environments, concomitantly to major migrations of human population throughout the world, both in time and space. It has been clearly related to an increase in sediment supply to estuaries in Minor Asia (Bronze Age, e.g. Spezzaferri et al, 2000) and in North America and Southwest Pacific (18th and 19th centuries, e.g. Goff, 1997), in response to deforestation on catchment areas. However, this relationship is less obvious in Europe (Sorrel et al., 2009), because deforestation occurred concomitantly to climate changes of the last millennium (climate instability at the end of Medieval Warm Period, Little Ice Age) that can also explain an increase in soil erosion. Indeed, these hypotheses have been proposed to explain a similar change in Marennes-Oléron Bay (Atlantic coast of France), which consists in the sudden deposition of a few meters-thick mud drape on basal mixed mud and sand bodies (Billeaud et al., 2005). The methods used to investigate this estuarine bay so far (very high resolution seismic stratigraphy, grain size analysis and radiocarbon dating) provided relevant information about recent environmental changes, but new data are now needed for further investigation. In the present study, we provide a multi-proxy analysis of the Marennes-Oléron Bay mud drape. A new 8 m-long core (M7UC01) was sampled on an intertidal flat, its location being determined on the basis of seismic stratigraphy. Core processing included visual description, physical measurements, grain size analysis every 2.5 to 5 cm, AMS radiocarbon dating, XRF core scanning, clay mineralogy and Rock Eval analysis. Fossil molluscs

Magnetic properties as tracers for source-to-sink dispersal of sediments: A case study in the Taiwan Strait

Science.gov (United States)

Horng, Chorng-Shern; Huh, Chih-An

2011-09-01

Different lithologies between Taiwan and southeastern China lead to diverse mineralogical composition for weathering products derived from the two shores of the Taiwan Strait. Pyrrhotite and magnetite are respectively the dominant magnetic minerals associated with fluvial sediments from western Taiwan and southeastern China. While magnetite commonly co-exists with pyrrhotite in sediments sourced from Taiwan, pyrrhotite has not been found in sediments sourced from mainland China. Associated with such a distinction are vast differences in magnetic properties, including magnetic susceptibility (χ), SIRM, HIRM and the S-ratio, which can be used to study the provenances of sediments in the Taiwan Strait and adjoining marginal seas. Based on any two of these parameters, the magnetic characteristics of much of the Taiwan Strait sediment can be explained using a two-endmember mixing model. Source-to-sink dispersal of sediments in the Taiwan Strait can then be traced from the distribution of these parameters. The results not only corroborate an earlier study based on radionuclides and particle size distribution ( Huh et al., 2011) but reveal more diagnostic details. Besides spatial distribution based on a large number (216) of surface sediments, we also analyzed temporal variation of magnetic properties in six well-dated cores collected at key sites along the sediment source-to-sink pathways. From profiles of these parameters in cores from the middle of the northern Taiwan Strait, it is calculated that sediment supply from Taiwan has increased substantially in the past five decades, which may very well be related to accelerated land use and increased frequency of intense rainfalls in Taiwan during the same period. The approach described in this work may be extended to other source-to-sink systems around the world and through time, especially the mountainous islands fringing the Pacific and Indian Oceans in southeastern Asia. As with Taiwan, these islands have high

The sedimentology, mineralogy and geochemistry of the Mooifontein deposit, Orange Free State

International Nuclear Information System (INIS)

Brynard, H.J.; Jakob, W.R.O.; Le Roux, J.P.

1982-08-01

The sedimentology, mineralogy and geochemistry of the Mooifontein deposit, which is situated north-west of Edenburg, Orange Free State, has been investigated. The orebody is located stratigraphically in the Adelaide Subgroup of the Karoo Sequence. Palaeocurrent and geological sections afford a picture of a fan-shaped distributary system and together with features such as small-scale channeling, cyclical deposition and an upward coarsening cycle, suggest a lacustrine-delta model of formation. The rocks constituting the deposit are feldspathic greywackes and feldspathic silt- and mudstones and can be divided into five texturally distinguishable groups. The mineralised lenses of the Mooifontein deposit attain a thickness of 7 m which can be split into two or three zones. The average grade of 0,85 kg U 3 O 8 /t is lower than that of the southern Karoo deposits (1 kg U 3 O 8 /t). The shallow depth of the orebody makes it amenable to open-cast mining. Molybdenum concentrations in the deposit are too low to be of economic significance. The sediments have low copper, vanadium and arsenic contents and the above-average calcite content of 9% will result in high acid consumption should an acid leaching process be used for uranium recovery. Both calcite and fluorite are unrelated to the uranium mineralisation. The deposit as a whole appears to have been little affected by post-genetic processes with only minor redistribution of uranium and moderate oxidation of organic carbon and sulphides

Mineral Fractionation during Sediment Comminution and Transport in Fluvio-Deltaic and Lacustrine Rocks of the Bradbury Group, Gale Crater, Mars

Science.gov (United States)

Siebach, K. L.; Baker, M. B.; Grotzinger, J. P.; McLennan, S. M.; Gellert, R.; Thompson, L. M.; Hurowitz, J.

2017-12-01

Mineral distribution patterns in sediments of the Bradbury group in Gale crater, interpreted from observations by the Mars Science Laboratory rover Curiosity, show the importance of transport mechanics in source-to-sink processes on Mars. The Bradbury group is comprised of basalt-derived mudstones to conglomerates exposed along the modern floor of Gale crater and analyzed along a 9-km traverse of the Curiosity rover. Over 110 bulk chemistry analyses of the rocks were acquired, along with two XRD mineralogical analyses of the mudstone. These rocks are uniquely suited for analysis of source-to-sink processes because they exhibit a wide range of compositions, but (based on multiple chemical weathering proxies) they appear to have experienced negligible cation-loss during weathering and erosion. Chemical variations between analyses correlate with sediment grain sizes, with coarser-grained rocks enriched in plagioclase components SiO2, Al2O3, and Na2O, and finer-grained rocks enriched in components of mafic minerals, consistent with grain-size sorting of mineral fractions during sediment transport. Further geochemical and mineralogical modeling supports the importance of mineral fractionation: even though the limited XRD data suggests that some fraction (if not all) of the rocks contain clays and an amorphous component, models show that 90% of the compositions measured are consistent with sorting of primary igneous minerals from a plagioclase-phyric subalkaline basalt (i.e., no corrections for cation-loss are required). The distribution of K2O, modeled as a potassium feldspar component, is an exception to the major-element trends because it does not correlate with grain size, but has an elevation-dependent signal likely correlated with the introduction of a second source material. However, the dominant compositional trends within the Bradbury group sedimentary rocks are correlated with grain size and consistent with mineral fractionation of minimally

Iron concretions in Brazilian Soils. 2. Mineralogical characterization

International Nuclear Information System (INIS)

Fontes, M.R.; Silva, E.G. da

1985-01-01

The mineralogy of six concretionary material from several pedological domains in Brazil were examined by x-ray diffratometry analysis and room temperature (RT) 57 Fe Moessbauer Spectroscopy. In two samples (from 'Quadrilatero Ferrifero' and Itaituba, in the state of Para) hematite was the predominant mineralogical phase, while in the other samples, from Chapada do Apodi (State of Rio Grande do Norte), Calciolandia (State of Minas Gerais), and Vicosa (State of Minas Gerais), goethite appeared as the main occurring mineral, in the (hydr) oxide crystallized fraction. The goethitic character was related to the manganese content in the concretions. The Moessbauer patterns exhibited superparamagnetic relaxation effects, although a six line hyperfine magnetic splitting, and a central doublet appeared at least in three cases. Exceptionally, in the two samples from Chapada do Apodi the six line pattern collapsed completely, and only a central doublet remained. The hyperfine magnetic field was drastically reduced both by particle size and isomorphically substituted aluminum in the iron oxide structure, probably, of Al-hematites. From the Moessbauer parameters, Al-goethite seemed to be present only in the sample from Vicosa, although it should be emphasized that the RT measurements do not always permit access to the hyperfine strucutre in this kind of material, as a result of small size particle effects. (Author) [pt

Environmental mineralogy - Understanding element behavior in ecosystems

International Nuclear Information System (INIS)

Brown Jr, G.E.; Calas, G.

2011-01-01

Environmental Mineralogy has developed over the past decade in response to the recognition that minerals are linked in many important ways with the global ecosystem. Minerals are the main repositories of the chemical elements in Earth's crust and thus are the main sources of elements needed for the development of civilization, contaminant and pollutant elements that impact global and local ecosystems, and elements that are essential plant nutrients. These elements are released from minerals through natural processes, such as chemical weathering, and anthropogenic activities, such as mining and energy production, agriculture and industrial activities, and careless waste disposal. Minerals also play key roles in the biogeochemical cycling of the elements, sequestering elements and releasing them as the primary minerals in crustal rocks undergo various structural and compositional transformations in response to physical, chemical, and biological processes that produce secondary minerals and soils. These processes have resulted in the release of toxic elements such as arsenic in groundwater aquifers, which is having a major impact on the health of millions of people in South and Southeast Asia. The interfaces between mineral surfaces and aqueous solutions are the locations of most chemical reactions that control the composition of the natural environment, including the composition of natural waters. The nuclear fuel cycle, from uranium mining to the disposition of high-level nuclear waste, is also intimately related to minerals. A fundamental understanding of these processes requires molecular-scale information about minerals, their bulk structures and properties such as solubility, their surfaces, and their interactions with aqueous solutions, atmospheric and soil gases, natural organic matter, and biological organisms. Gaining this understanding is further complicated by the presence of natural, incidental, and manufactured nano-particles in the environment, which

Thermal and mineralogical characterization of drill cuttings from north capixaba: initial studies

International Nuclear Information System (INIS)

Fialho, P.F.; Goncalves, G. dos R.; Calmon, J.L.; Tristao, F.A.; Nunes, E.; Cunha, A.G.

2011-01-01

The drilling of oil wells generates various wastes among which are the cuttings and drilling fluids. The management of these wastes have been a problem for the oil and gas industry because of the amount generated and its contaminants, which can be organic and inorganic. This paper presents initial studies of thermal and mineralogical characterization of the drill cuttings from oil wells and gas in Southeast Brazilian, state of Espirito Santo with aim of reuse them as raw material in building materials. Characterizations were performed physical, thermal and mineralogical by particle size distribution, thermogravimetric analysis, differential scanning calorimetry and X-ray diffraction. The results indicate that there are potential replacements of natural raw materials or drill cuttings in the production of building materials. (author)

Mineralogical controls on aluminum and magnesium in uranium mill tailings: Key Lake, Saskatchewan, Canada.

Science.gov (United States)

Gomez, M A; Hendry, M J; Koshinsky, J; Essilfie-Dughan, J; Paikaray, S; Chen, J

2013-07-16

The mineralogy and evolution of Al and Mg in U mill tailings are poorly understood. Elemental analyses (ICP-MS) of both solid and aqueous phases show that precipitation of large masses of secondary Al and Mg mineral phases occurs throughout the raffinate neutralization process (pH 1-11) at the Key Lake U mill, Saskatchewan, Canada. Data from a suite of analytical methods (ICP-MS, EMPA, laboratory- and synchrotron-based XRD, ATR-IR, Raman, TEM, EDX, ED) and equilibrium thermodynamic modeling showed that nanoparticle-sized, spongy, porous, Mg-Al hydrotalcite is the dominant mineralogical control on Al and Mg in the neutralized raffinate (pH ≥ 6.7). The presence of this secondary Mg-Al hydrotalcite in mineral samples of both fresh and 15-year-old tailings indicates that the Mg-Al hydrotalcite is geochemically stable, even after >16 years in the oxic tailings body. Data shows an association between the Mg-Al hydrotalcite and both As and Ni and point to this Mg-Al hydrotalcite exerting a mineralogical control on the solubility of these contaminants.

Mineralogy of Non-Silicified Fossil Wood

Directory of Open Access Journals (Sweden)

George E. Mustoe

2018-03-01

Full Text Available The best-known and most-studied petrified wood specimens are those that are mineralized with polymorphs of silica: opal-A, opal-C, chalcedony, and quartz. Less familiar are fossil woods preserved with non-silica minerals. This report reviews discoveries of woods mineralized with calcium carbonate, calcium phosphate, various iron and copper minerals, manganese oxide, fluorite, barite, natrolite, and smectite clay. Regardless of composition, the processes of mineralization involve the same factors: availability of dissolved elements, pH, Eh, and burial temperature. Permeability of the wood and anatomical features also plays important roles in determining mineralization. When precipitation occurs in several episodes, fossil wood may have complex mineralogy.

Mineralogic Model (MM3.0) Report

International Nuclear Information System (INIS)

Sanchez, A.

2004-01-01

The purpose of this report is to provide a three-dimensional (3-D) representation of the mineral abundance within the geologic framework model domain. The mineralogic model enables project personnel to estimate mineral abundances at any position, within the model region, and within any stratigraphic unit in the model area. The model provides the abundance and distribution of 10 minerals and mineral groups within 22 stratigraphic sequences or model layers in the Yucca Mountain area. The uncertainties and limitations associated with this model are discussed in Section 6.4. Model validation accomplished by corroboration with data not cited as direct input is discussed in Section 7

Mineralogic and petrologic investigation of post-test core samples from the Spent Fuel Test - Climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Beiriger, J.

1985-02-01

We have characterized a suite of samples taken subsequent to the end of the Spent Fuel Test - Climax by petrographic and microanalytical techniques and determined their mineral assemblage, modal properties, and mineral chemistry. The samples were obtained immediately adjacent to the canister borehole at a variety of depths and positions within the canister drift, as well as radially outward from each canister hole. This method of sampling allows variations in post-test mineralogic properties to be evaluated on the basis of (1) depth along a particular canister hole and (2) position within the canister drift, with respect to the heat and radiation sources, and with respect to the pre - test samples. In no case did we find any significant correlation between the mineralogical properties and variables listed above. In short, the Spent Fuel Test - Climax has produced no identifiable mineralogical response in the Climax quartz monzonite. 12 refs., 11 figs., 5 tabs

Arsenic mineralogy of near-neutral soils and mining waste at the Smolotely-Líšnice historical gold district, Czech Republic

Czech Academy of Sciences Publication Activity Database

Drahota, P.; Kulakowski, O.; Culka, A.; Knappová, M.; Rohovec, Jan; Veselovský, F.; Racek, M.

2018-01-01

Roč. 89, February (2018), s. 243-254 ISSN 0883-2927 Institutional support: RVO:67985831 Keywords : soil * mining waste * pharmacosiderite * yukonite * arseniosiderite Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Mineralogy Impact factor: 2.581, year: 2016

Uranium geochemistry, mineralogy, geology, exploration and resources

International Nuclear Information System (INIS)

De Vivo, B.

1984-01-01

This book comprises papers on the following topics: history of radioactivity; uranium in mantle processes; transport and deposition of uranium in hydrothermal systems at temperatures up to 300 0 C: Geological implications; geochemical behaviour of uranium in the supergene environment; uranium exploration techniques; uranium mineralogy; time, crustal evolution and generation of uranium deposits; uranium exploration; geochemistry of uranium in the hydrographic network; uranium deposits of the world, excluding Europe; uranium deposits in Europe; uranium in the economics of energy; role of high heat production granites in uranium province formation; and uranium deposits

Detailed description of oil shale organic and mineralogical heterogeneity via fourier transform infrared mircoscopy

Science.gov (United States)

Washburn, Kathryn E.; Birdwell, Justin E.; Foster, Michael; Gutierrez, Fernando

2015-01-01

Mineralogical and geochemical information on reservoir and source rocks is necessary to assess and produce from petroleum systems. The standard methods in the petroleum industry for obtaining these properties are bulk measurements on homogenized, generally crushed, and pulverized rock samples and can take from hours to days to perform. New methods using Fourier transform infrared (FTIR) spectroscopy have been developed to more rapidly obtain information on mineralogy and geochemistry. However, these methods are also typically performed on bulk, homogenized samples. We present a new approach to rock sample characterization incorporating multivariate analysis and FTIR microscopy to provide non-destructive, spatially resolved mineralogy and geochemistry on whole rock samples. We are able to predict bulk mineralogy and organic carbon content within the same margin of error as standard characterization techniques, including X-ray diffraction (XRD) and total organic carbon (TOC) analysis. Validation of the method was performed using two oil shale samples from the Green River Formation in the Piceance Basin with differing sedimentary structures. One sample represents laminated Green River oil shales, and the other is representative of oil shale breccia. The FTIR microscopy results on the oil shales agree with XRD and LECO TOC data from the homogenized samples but also give additional detail regarding sample heterogeneity by providing information on the distribution of mineral phases and organic content. While measurements for this study were performed on oil shales, the method could also be applied to other geological samples, such as other mudrocks, complex carbonates, and soils.

New directional archeomagnetic data of burned cave sediments from Switzerland and geomagnetic field variations in Central Europe

Science.gov (United States)

Kapper, K. L.; Donadini, F.; Mauvilly, M.; Panovska, S.; Hirt, A. M.

2014-08-01

This paper presents new directional archeomagnetic data from nine Meso-/Neolithic fireplaces, sampled in a cave shelter, at Arconciel, in western Switzerland. Rock magnetic measurements indicate a homogenous magnetic mineralogy in all fireplaces, with magnetite as the main magnetic carrier. The remanent magnetization is stable and generally shows one characteristic directional component. Nine new directions, which were obtained from Arconciel, are combined with 356 other archeomagnetic data from a circular area with a radius of 700 km around this site, to obtain a penalized least square spline fit for the past 9000 yr. We found in general good agreement with other local compilations, such as the Balkan curve, the regional SCHA.DIF.8k model and with lake sediments from UK, Fennoscandia and Switzerland. Nevertheless, a time lag of several centuries is observed for a declination maximum between the archeomagnetic spline fit and the other European data records around 5900 BC. This time lag is also observed in the Swiss lake sediment record; therefore we interpret this shift as a local feature of the Earth's magnetic field.

Multivariate analysis of the geochemistry and mineralogy of soils along two continental-scale transects in North America

Science.gov (United States)

Drew, L.J.; Grunsky, E.C.; Sutphin, D.M.; Woodruff, L.G.

2010-01-01

Soils collected in 2004 along two North American continental-scale transects were subjected to geochemical and mineralogical analyses. In previous interpretations of these analyses, data were expressed in weight percent and parts per million, and thus were subject to the effect of the constant-sum phenomenon. In a new approach to the data, this effect was removed by using centered log-ratio transformations to 'open' the mineralogical and geochemical arrays. Multivariate analyses, including principal component and linear discriminant analyses, of the centered log-ratio data reveal the effects of soil-forming processes, including soil parent material, weathering, and soil age, at the continental-scale of the data arrays that were not readily apparent in the more conventionally presented data. Linear discriminant analysis of the data arrays indicates that the majority of the soil samples collected along the transects can be more successfully classified with Level 1 ecological regional-scale classification by the soil geochemistry than soil mineralogy. A primary objective of this study is to discover and describe, in a parsimonious way, geochemical processes that are both independent and inter-dependent and manifested through compositional data including estimates of the elements and corresponding mineralogy. ?? 2010.

Mineralogic-chemical and physical characteristics of the mud in Ä°zmir (western Turkey): suitability for use in pelotherapy

Science.gov (United States)

Çelik Karakaya, Muazzez; Karakaya, Necati

2013-04-01

The study conducted on peloid used spas in İzmir city region (western part of Turkey) included the investigation of the mineralogical, physico-chemical and geochemical properties of the three types of peloid samples in order to assess the suitability of the material for healing- aesthetic-related purposes. In situ formed muds in lagoons near the Aegean Sea (named as first group) and inner swamp muds (second group) unprocessed and raw have been using therapy and thermal baths. Mud and hot springs at around the Aegean Sea have been popular since ancient times for the treatment of rheumatic diseases, musculoskeletal disorders in the region. The mineralogical characteristics of the thermal muds are in accordance with the geological origin of the material and water sources. Mineralogic composition, mineral content and morphologic properties of the samples were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM-EDS). Chemical composition of the muds and thermal waters were determined by ICP-EAS and ICP-MS. Both of the sediment is fine- to medium size-grained and composed mostly of clay minerals, partially quartz, feldspar, carbonates, and halite, and rarely gypsum. The mineralogic composition of the muds controls the physico-chemical properties of the muds. Anion e.g., Cl, Br, and SO4, contents the thermal waters of the first group is extremely different and so the springs contain a high level of sodium chloride, magnesium sulphate, and calcium bicarbonate. The water temperature is 45 oC with a pH of 6.95 and electrical conductivity (EC) is 4.5 mS/lt in the first group while 71 oC with a pH 6.58 and EC is 2.52 mS/lt in the second ones. However, major and some of the trace element concentration of the mud samples are nearly similar, As, Cd, Cu, Hg, Ni, Sb, Se, T and Zn content of the first group is exceptionally lower than the second ones. And the hazardous element concentrations are extremely higher than the pharmaceutical clay in the second

Hydrothermal Alteration Promotes Humic Acid Formation in Sediments: A Case Study of the Central Indian Ocean Basin

Science.gov (United States)

Sarma, Nittala S.; Kiran, Rayaprolu; Rama Reddy, M.; Iyer, Sridhar D.; Peketi, A.; Borole, D. V.; Krishna, M. S.

2018-01-01

Anomalously high concentrations of humic-rich dissolved organic matter (DOM) in extant submarine hydrothermal vent plumes traveled far from source are increasingly being reported. This DOM, able to mobilize trace metals (e.g., Fe2+) has been hypothesized as originating from organic matter produced by thermogenic bacteria. To eliminate a possible abiogenic origin of this DOM, study is required of well-preserved organic compounds that can be attributed to thermogenic bacteria. The Central Indian Ocean Basin (CIOB) is part of a diffuse plate boundary and an intraplate deformation zone. Coarse fraction (>63 µ) characteristics, mineralogy, magnetic susceptibility, and geochemistry were examined in sediments of a core raised close to a north-south fracture zone near the Equator. Two horizons of distinctly brown-colored sediments were shown as hydrothermally altered from their charred fragments and geochemistry (CaCO3, Corg, Ti/Al, Al/(Al + Fe + Mn), Sr/Ba, Mg/Li, Mn micronodules, Fe/Mn). We examined whether humic substances were preserved in these sediments, and if so whether their carbon isotope distribution would support their hydrothermal origin. Alkali extraction of sediments afforded humic acids (HA) in yields up to 1.2% in the brown sediments. The remaining portions of the core had nil or low concentrations of HA. The carbon of hydrothermal HA is isotopically heavier (average δ13C, ˜ -16.3‰) compared to nonhydrothermal HA (-18.1‰), suggesting that they were probably formed from organic matter that remained after elimination of lighter carbon enriched functional groups during diagenesis. The results provide compelling evidence of HA formation from lipids originating from thermogenic bacteria.

Iron mineralogy and uranium-binding environment in the rhizosphere of a wetland soil

Energy Technology Data Exchange (ETDEWEB)

Kaplan, Daniel I., E-mail: daniel.kaplan@srnl.doe.gov [Savannah River National Laboratory, Aiken, SC 29808 (United States); Kukkadapu, Ravi [Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Seaman, John C. [Savannah River Ecology Laboratory, University of Georgia, Aiken, SC 29802 (United States); Arey, Bruce W.; Dohnalkova, Alice C. [Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Buettner, Shea [Savannah River Ecology Laboratory, University of Georgia, Aiken, SC 29802 (United States); Li, Dien [Savannah River National Laboratory, Aiken, SC 29808 (United States); Varga, Tamas [Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Scheckel, Kirk G. [US Environmental Protection Agency, National Risk Management Research Laboratory, Cincinnati, OH 45224 (United States); Jaffé, Peter R. [Princeton University, Princeton, NJ 08540 (United States)

2016-11-01

Wetlands mitigate the migration of groundwater contaminants through a series of biogeochemical gradients that enhance multiple contaminant-binding processes. The hypothesis of this study was that wetland plant roots contribute organic carbon and release O{sub 2} within the rhizosphere (plant-impact soil zone) that promote the formation of Fe(III)-(oxyhydr)oxides. In turn, these Fe(III)-(oxyhydr)oxides stabilize organic matter that together contribute to contaminant immobilization. Mineralogy and U binding environments of the rhizosphere were evaluated in samples collected from contaminated and non-contaminated areas of a wetland on the Savannah River Site in South Carolina. Based on Mössbauer spectroscopy, rhizosphere soil was greatly enriched with nanogoethite, ferrihydrite-like nanoparticulates, and hematite, with negligible Fe(II) present. X-ray computed tomography and various microscopy techniques showed that root plaques were tens-of-microns thick and consisted of highly oriented Fe-nanoparticles, suggesting that the roots were involved in creating the biogeochemical conditions conducive to the nanoparticle formation. XAS showed that a majority of the U in the bulk wetland soil was in the + 6 oxidation state and was not well correlated spatially to Fe concentrations. SEM/EDS confirm that U was enriched on root plaques, where it was always found in association with P. Together these findings support our hypothesis and suggest that plants can alter mineralogical conditions that may be conducive to contaminant immobilization in wetlands. - Highlights: • Uranium concentrated in wetland environments • Hypothesized that plant roots change mineralogy and contaminant binding environment, promoting contaminant immobilization • Field study showed sharp dissolved U concentration profiles over the centimeter scale. • Spectroscopy identified unique mineralogy in rhizosphere compared to non-rhizosphere soil. • Uranium concentrated in root plaques in the + 6

Iron mineralogy and uranium-binding environment in the rhizosphere of a wetland soil

International Nuclear Information System (INIS)

Kaplan, Daniel I.; Kukkadapu, Ravi; Seaman, John C.; Arey, Bruce W.; Dohnalkova, Alice C.; Buettner, Shea; Li, Dien; Varga, Tamas; Scheckel, Kirk G.; Jaffé, Peter R.

2016-01-01

Wetlands mitigate the migration of groundwater contaminants through a series of biogeochemical gradients that enhance multiple contaminant-binding processes. The hypothesis of this study was that wetland plant roots contribute organic carbon and release O_2 within the rhizosphere (plant-impact soil zone) that promote the formation of Fe(III)-(oxyhydr)oxides. In turn, these Fe(III)-(oxyhydr)oxides stabilize organic matter that together contribute to contaminant immobilization. Mineralogy and U binding environments of the rhizosphere were evaluated in samples collected from contaminated and non-contaminated areas of a wetland on the Savannah River Site in South Carolina. Based on Mössbauer spectroscopy, rhizosphere soil was greatly enriched with nanogoethite, ferrihydrite-like nanoparticulates, and hematite, with negligible Fe(II) present. X-ray computed tomography and various microscopy techniques showed that root plaques were tens-of-microns thick and consisted of highly oriented Fe-nanoparticles, suggesting that the roots were involved in creating the biogeochemical conditions conducive to the nanoparticle formation. XAS showed that a majority of the U in the bulk wetland soil was in the + 6 oxidation state and was not well correlated spatially to Fe concentrations. SEM/EDS confirm that U was enriched on root plaques, where it was always found in association with P. Together these findings support our hypothesis and suggest that plants can alter mineralogical conditions that may be conducive to contaminant immobilization in wetlands. - Highlights: • Uranium concentrated in wetland environments • Hypothesized that plant roots change mineralogy and contaminant binding environment, promoting contaminant immobilization • Field study showed sharp dissolved U concentration profiles over the centimeter scale. • Spectroscopy identified unique mineralogy in rhizosphere compared to non-rhizosphere soil. • Uranium concentrated in root plaques in the + 6 oxidation

Corrigendum to "Arsenic mineralogy and mobility in the arsenic-rich historical mine waste dump" [Sci. Total Environ. 536 (2015) 713-728

Czech Academy of Sciences Publication Activity Database

Filippi, Michal; Drahota, P.; Machovič, V.; Böhmová, Vlasta; Mihaljevič, M.

2016-01-01

Roč. 541, January 15 (2016), s. 1639 ISSN 0048-9697 Institutional support: RVO:67985831 Keywords : corrigendum * erratum * arsenic mineralogy Subject RIV: DB - Geology ; Mineralogy Impact factor: 4.900, year: 2016

Mineralogical characteristics of andradite and grossular of te Sasa Ore Field

International Nuclear Information System (INIS)

Shijakova-Ivanova, Tena; Zajkova-Paneva, Vesna

2003-01-01

The paper presents the mineralogical characteristics of garnets (andradite and grossular) of the Sasa ore field, Investigations were carried out in the Institute for Crystallography and Petrography in Zurich, Switzerland and in the laboratory of the Faculty of Mining and Geology, Shtip. (Original)

Prediction of potential compressive strength of Portland clinker from its mineralogy

DEFF Research Database (Denmark)

Svinning, K.; Høskuldsson, Agnar; Justnes, H.

2010-01-01

Based on a statistical model first applied for prediction of compressive strength up to 28 d from the microstructure of Portland cement, potential compressive strength of clinker has been predicted from its mineralogy. The prediction model was evaluated by partial least squares regression...

Provenance of the heavy metals in sand sediments of the Oman Sea (Sistan and Baluchestan district

Directory of Open Access Journals (Sweden)

Maryam Soleimani

2015-04-01

Full Text Available Introduction Mineral composition of source rock is one of the most important factors for concentration and distribution of heavy metals in sediments. Therefore, study on distribution of these elements and the related minerals in sediments provides information about natural origin of elements. Moreover, the interpretation of origin and distribution of sandy sediments is considerably enhanced by mineralogical and geochemical studies of these sediments. The main objective of this research is to evaluate distribution of Zn, Cu, Sr, Cd, Fe and Mn in sand sediments of the Oman Sea, their relationship with mineral composition of the sediments and also determining their provenance. Materials and Methods Sampling of surface sediments of the Oman Sea was performed in 16 sampling stations. Heavy minerals and rock fragments of the sediments in fine and coarse sand sizes respectively were qualitatively and quantitatively studied by polarizing microscope (Folk, 1974; Pettijohn et al., 1981; Tucker, 1988. Concentration of the heavy metals were also analyzed by AAS method (Mico et al., 2008. Result Mineralogical composition of the studied sediments contain quartz, feldspars and heavy minerals in their order of abundances. The rock fragments consist of sedimentary, igneous and metamorphic in their order of frequencies as well. The concentrations of the studied heavy metals (in ppm in the sediments are Cd (1.42, Cu (9.99, Zn (36.72, Sr (181.18, Mn (377.33 and Fe (20247.55 in their order of abundances. Distribution of the Zn concentration generally shows decreasing trend from west of the study area to the Guatr Bay. The concentrations of Zn and Cu show close relationship with the frequencies of biotite and muscovite. The Cu concentration also shows positive correlation with the Zn and Fe concentrations. Distribution of the Sr and Cd concentrations is similar to variation of the calcium carbonate content. The Cd and Sr concentrations also show positive correlation

Mineralogy and trace element chemistry of the Siliceous Earth of ...

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

We report the presence of a 3–5 cm thick loose fragmental layer in the Siliceous Earth at Matti ka. Gol in the Barmer basin of Rajasthan. Petrographic, chemical and mineralogical study reveals the presence of abundant volcanic debris such as glass shards, agglutinates, hollow spheroids, kinked biotites, feldspars showing ...

An integrated view of the chemistry and mineralogy of martian soils

Science.gov (United States)

Yen, A. S.; Gellert, Ralf; Schroder, C.; Morris, R.V.; Bell, J.F.; Knudson, A.T.; Clark, B. C.; Ming, D. W.; Crisp, J.A.; Arvidson, R. E.; Blaney, D.; Brückner, J.; Christensen, P.R.; DesMarais, D.J.; De Souza, P.A.; Economou, T.E.; Ghosh, A.; Hahn, B.C.; Herkenhoff, K. E.; Haskin, L.A.; Hurowitz, J.A.; Joliff, B.L.; Johnson, J. R.; Klingelhofer, G.; Madsen, M.B.; McLennan, S.M.; McSween, H.Y.; Richter, L.; Rieder, R.; Rodionov, D.; Soderblom, L.; Squyres, S. W.; Tosca, N.J.; Wang, A.; Wyatt, M.; Zipfel, J.

2005-01-01

The mineralogical and elemental compositions of the martian soil are indicators of chemical and physical weathering processes. Using data from the Mars Exploration Rovers, we show that bright dust deposits on opposite sides of the planet are part of a global unit and not dominated by the composition of local rocks. Dark soil deposits at both sites have similar basaltic mineralogies, and could reflect either a global component or the general similarity in the compositions of the rocks from which they were derived. Increased levels of bromine are consistent with mobilization of soluble salts by thin films of liquid water, but the presence of olivine in analysed soil samples indicates that the extent of aqueous alteration of soils has been limited. Nickel abundances are enhanced at the immediate surface and indicate that the upper few millimetres of soil could contain up to one per cent meteoritic material.

Signal or noise? Separating grain size-dependent Nd isotope variability from provenance shifts in Indus delta sediments, Pakistan

Science.gov (United States)

Jonell, T. N.; Li, Y.; Blusztajn, J.; Giosan, L.; Clift, P. D.

2017-12-01

Rare earth element (REE) radioisotope systems, such as neodymium (Nd), have been traditionally used as powerful tracers of source provenance, chemical weathering intensity, and sedimentary processes over geologic timescales. More recently, the effects of physical fractionation (hydraulic sorting) of sediments during transport have called into question the utility of Nd isotopes as a provenance tool. Is source terrane Nd provenance resolvable if sediment transport strongly induces noise? Can grain-size sorting effects be quantified? This study works to address such questions by utilizing grain size analysis, trace element geochemistry, and Nd isotope geochemistry of bulk and grain-size fractions (Pakistan. Here we evaluate how grain size effects drive Nd isotope variability and further resolve the total uncertainties associated with Nd isotope compositions of bulk sediments. Results from the Indus delta indicate bulk sediment ɛNd compositions are most similar to the <63 µm fraction as a result of strong mineralogical control on bulk compositions by silt- to clay-sized monazite and/or allanite. Replicate analyses determine that the best reproducibility (± 0.15 ɛNd points) is observed in the 125-250 µm fraction. The bulk and finest fractions display the worst reproducibility (±0.3 ɛNd points). Standard deviations (2σ) indicate that bulk sediment uncertainties are no more than ±1.0 ɛNd points. This argues that excursions of ≥1.0 ɛNd points in any bulk Indus delta sediments must in part reflect an external shift in provenance irrespective of sample composition, grain size, and grain size distribution. Sample standard deviations (2s) estimate that any terrigenous bulk sediment composition should vary no greater than ±1.1 ɛNd points if provenance remains constant. Findings from this study indicate that although there are grain-size dependent Nd isotope effects, they are minimal in the Indus delta such that resolvable provenance-driven trends can be

Mineralogy of soils from two continental-scale transects across the United States and Canada and its relation to soil geochemistry and climate

Science.gov (United States)

Eberl, D.D.; Smith, D.B.

2009-01-01

Quantitative mineralogy correlates with major-, minor- and trace-element chemistry for 387 samples of A-horizon and deeper soils collected from east-west and north-south transects across the USA and Canada, where the deeper soils were collected beneath the A-horizon samples. Concentrations of the major elements correlate with specific mineral phases. Minor- and trace-element concentrations correlate with the same phases as the major elements with which they share similar geochemical behavior. Concentrations of quartz and feldspar correlate with precipitation trends east of the Rocky Mountains, and are independent of the underlying rock type and age, indicating that the weathering of soils in this region may have reached a steady-state mineralogy. Other trends in mineralogy relate to physiographic province. The combination of quantitative mineralogy and chemical analysis yields a much richer portrait of soils than can be gained from chemistry alone, because the origins of chemical trends and the chemical availability of specific elements are related to mineralogy.

Mineralogical test as a preliminary step for metallurgical proses of Kalan ores

International Nuclear Information System (INIS)

Affandi, K.

1998-01-01

Mineralogical tests as a preliminary step for hydrometallurgy of Kalan ores, including Eko Remaja and Rirang have been carried out to identify the elements and minerals content which affect the metallurgical process, especially the leaching and purification of uranium. Mineralogical tests have been done by means of radioactive and radioluxugraph tests to identify radioactive minerals; thin specimen analysis, Scanning Electron Microscopy (SEM) to identify elements and morphology, EPMA to analyse qualitatively the elements, X-ray Diffractometer (XRD) to identify of minerals content; and X-ray Fluorescence (XRF) and chemical analyses to determine total elements qualitatively and quantitatively. The experimental results show that the Eko Remaja ores contain uraninite and brannerite, iron and titan oxides, sulfides, phosphates and silicates minerals, while the Rirang ores contain uraninite, monazite and molybdenite

Geochemical and Pb isotopic evidence for sources and dispersal of metal contamination in stream sediments from the mining and smelting district of Pribram, Czech Republic

International Nuclear Information System (INIS)

Ettler, Vojtech; Mihaljevic, Martin; Sebek, Ondrej; Molek, Michael; Grygar, Tomas; Zeman, Josef

2006-01-01

Stream sediments from the mining and smelting district of Pribram, Czech Republic, were studied to determine the degree, sources and dispersal of metal contamination using a combination of bulk metal and mineralogical determinations, sequential extractions and Pb isotopic analyses. The highest metal concentrations were found 3-4 km downstream from the main polymetallic mining site (9800 mg Pb kg -1 , 26 039 mg Zn kg -1 , 316.4 mg Cd kg -1 , 256.9 mg Cu kg -1 ). The calculated enrichment factors (EFs) confirmed the extreme degree of contamination by Pb, Zn and Cd (EF > 40). Lead, Zn and Cd are bound mainly to Fe oxides and hydroxides. In the most contaminated samples Pb is also present as Pb carbonates and litharge (PbO). Lead isotopic analysis indicates that the predominant source of stream sediment contamination is historic Pb-Ag mining and primary Pb smelting ( 206 Pb/ 207 Pb = 1.16), while the role of secondary smelting (car battery processing) is negligible. - Pb isotopes properly complete traditional investigations of metal sources and dispersal in contaminated stream sediments

Mineralogia e reserva de K de Cambissolos submetidos a diferentes manejos após derrubada e queima da floresta na Amazônia Meridional Mineralogy and K reserve of Cambisols submitted to different managements after slashing and burning of the forest in the Meridional Amazon, Brazil

Directory of Open Access Journals (Sweden)

Alessandro Góis Orrutéa

2012-01-01

Full Text Available As altas temperaturas ocorrentes durante a queima na floresta Amazônica podem induzir transformações mineralógicas da fração argila. Este trabalho objetivou avaliar as alterações mineralógicas nas frações areia, silte e argila e na reserva mineral de solos submetidos a diferentes manejos (11 anos de mata secundária, pastagem e café após a derrubada e queima de floresta nativa situada na Amazônia Meridional, município de Cacoal (RO. Uma área de floresta nativa ombrófila densa, com mesma feição pedológica, foi dividida em quatro partes, sendo três áreas submetidas ao corte e à queima e posteriormente cultivadas. Em cada manejo, os perfis de solos foram descritos e amostras dos horizontes A, AB, B1, 2B2 e 2BC foram coletadas para as análises mineralógicas das frações argila, silte e areia (difratometria de raios X e químicas da fração argila (extração de Fe com ditionito-citrato-bicarbonato - DCB e com oxalato de amônio - OA. Os teores de K não trocáveis foram determinados nas amostras de solo após extração com HNO3 1 mol L-1 fervente. Verificou-se o predomínio da caulinita na fração argila e alta reserva mineral de K nos solos, associada à ocorrência de mica nas frações argila, silte e areia. Os diferentes manejos não afetaram os teores de Fe2O3DCB e Fe2O3OA; por outro lado, o maior valor estimado para a relação entre os teores de goethita e hematita [Gt/(Gt+Hm] na fração argila no horizonte A da floresta indica uma possível transformação parcial de Gt em Hm durante a queima da floresta para a implantação dos manejos mata secundária, pastagem e café.The high soil temperatures that take place during the burning of the Amazon rainforest may induce soil mineralogical transformations. This study aimed to evaluate mineralogical changes in sand, silt and clay fractions and to assess K reserve of soils submitted to different managements (11 years of secondary forest, pasture and coffee plantation

Mineralogical Plasticity Acts as a Compensatory Mechanism to the Impacts of Ocean Acidification.

Science.gov (United States)

Leung, Jonathan Y S; Russell, Bayden D; Connell, Sean D

2017-03-07

Calcifying organisms are considered particularly susceptible to the future impacts of ocean acidification (OA), but recent evidence suggests that they may be able to maintain calcification and overall fitness. The underlying mechanism remains unclear but may be attributed to mineralogical plasticity, which modifies the energetic cost of calcification. To test the hypothesis that mineralogical plasticity enables the maintenance of shell growth and functionality under OA conditions, we assessed the biological performance of a gastropod (respiration rate, feeding rate, somatic growth, and shell growth of Austrocochlea constricta) and analyzed its shell mechanical and geochemical properties (shell hardness, elastic modulus, amorphous calcium carbonate, calcite to aragonite ratio, and magnesium to calcium ratio). Despite minor metabolic depression and no increase in feeding rate, shell growth was faster under OA conditions, probably due to increased precipitation of calcite and trade-offs against inner shell density. In addition, the resulting shell was functionally suitable for increasingly "corrosive" oceans, i.e., harder and less soluble shells. We conclude that mineralogical plasticity may act as a compensatory mechanism to maintain overall performance of calcifying organisms under OA conditions and could be a cornerstone of calcifying organisms to acclimate to and maintain their ecological functions in acidifying oceans.

Hydrothermally-induced changes in mineralogy and magnetic properties of oxidized A-type granites

Science.gov (United States)

Nédélec, Anne; Trindade, Ricardo; Peschler, Anne; Archanjo, Carlos; Macouin, Mélina; Poitrasson, Franck; Bouchez, Jean-Luc

2015-01-01

The changes in magnetic mineralogy due to the hydrothermal alteration of A-type granitic rocks have been thoroughly investigated in samples from the granite of Tana (Corsica, France), and compared with other A-type granites: Meruoca (NE Brazil), Bushveld (South Africa), Mount Scott (Wichita Mountains, Oklahoma, USA) and the stratoid hypersolvus granites of Madagascar. The altered red-colored samples and their non-altered equivalents were magnetically characterized by means of magnetic susceptibility measurements, hysteresis loops, remanent coercivity spectra, and Lowrie test. It is shown that hydrothermalization in magnetite-bearing granites is related to the formation of fine-grained magnetite and hematite, and to coeval depletion in the content of primary low-coercive coarse-grained magnetite. These mineralogical changes give typical rock magnetic signatures, namely lower susceptibility magnitudes and anisotropy degrees, prolate AMS (anisotropy of magnetic susceptibility) fabrics and increased coercivities. Optical microscopy and SEM (scanning electronic microscopy) images suggest that the orientation of the secondary magnetic minerals is related to fluid-pathways and micro-fractures formed during the hydrothermal event and therefore may be unrelated to magma emplacement and crystallization fabrics. Changes in magnetic mineralogy and grain-size distribution have also to be considered for any paleomagnetic and iron isotope studies in granites.

OU3 sediment dating and sedimentation rates

International Nuclear Information System (INIS)

Blair, R.B.; Wolaver, H.A.; Burger, V.M.

1994-01-01

Environmental Technologies at Rocky Flats Environmental Technology Site (RFS) investigated the sediment history of Standley Lake, Great Western Reservoir, and Mower Reservoir using 137 Cs and 239,240 Pu global fall-out as dating indicators. These Colorado Front Range reservoirs have been the subject of study by various city, state and national agencies due to suspected Department of Energy Rocky Flats Plant impacts. We performed sediment dating as part of the RCRA Facility Investigation/Remedial Investigation Report for Operable Unit 3. A sediment chronology profile assists scientist in determining the year of sedimentation for a particular peak concentration of contaminants. Radioisotope sediment dating for the three reservoirs indicated sedimentation rates of 0.7 to 0.8 in./yr. for Standley Lake (SL), 0.9 in./yr. for Great Western Reservoir (GWR), and 0.3 in./yr. in Mower Reservoir (MR). RFS sediment dating for Operable Unit 3 compared favorably with the Hardy, Livingston, Burke, and Volchok Standley Lake study. This report describes the cesium/plutonium sediment dating method, estimates sedimentation rates for Operable Unit 3 reservoirs, and compares these results to previous investigations

Caulins brasileiros: alguns aspectos da geologia e da mineralogia Brazilian kaolins: some aspects of the geology and mineralogy

Directory of Open Access Journals (Sweden)

Ian Richard Wilson

1998-08-01

Full Text Available A dimensão do Brasil e a diversidade da geologia se reflete em vários meios nos quais montagens de caulinita foram formadas. Os meios geológicos dos caulins brasileiros podem ser divididos nos seguintes grupos - caulins sedimentares, caulins oriundos de pegmatitas, de rochas graníticas, de rochas vulcânicas, e caulins derivados de anortosito. As argilas sedimentares são encontradas principalmente na bacia amazônica e aquelas adjacentes ao rio Jari estão sendo exploradas comercialmente para exportação como argilas para recobrimento de papel. Os caulins amazônicos são caracterizados por alto teor de ferro e titânia (estruturais com baixos níveis de álcalis e exibindo cristais de caulinita euédricos. As pegmatitas do sudeste, quando não recobertas com óxido de ferro, tem extremamente baixos teores de ferro e titânia e uma mistura de caulinita 7Å / haloisita 10Å ocorre em todos depósitos. As pegmatitas do nordeste produzem caulins constituídos somente por caulinitas euédricas com ausência de haloisita. Os caulins de granito tem geralmente maiores teores de ferro quando comparados com pegmatitas e são raros os depósitos constituídos somente por caulinita, sendo comum uma mistura de caulinita 7Å / haloisita. Os caulins obtidos da pegmatita e do granito são utilizados como cobertura de papel e em cerâmica em geral. Argilas de origem vulcânica são utilizadas em cerâmicas na região. Os caulins obtidos de anortosito são semelhantes em níveis de ferro e titânia àqueles obtidos de caulins graníticos. Montagens de caulinita e pequenas quantidades de haloisita 7Å são encontrados. Essas argilas são usadas tanto em cerâmicas de mesa quanto em preenchimentos para papel.The size of Brazil and the diversity of geology is reflected in varying environments in which kaolinite assemblages have been formed. The geological environments of the Brazilian kaolin may be divided into the following groups - sedimentary kaolin, kaolin derived from pegmatite, from granitic rocks, from volcanic rocks and kaolin derived from anorthosite. The sedimentary clays are mainly found in the Amazon basin and those adjacent to the Jari River are being exploited commercially for export as a paper coating clay. Amazon kaolin is characterised by high iron and titania (lattice-held with low levels of alkali and exhibiting euhedral kaolinite crystals. The South-eastern pegmatite, when not iron stained, are extremely low in iron and titania and a mixture of kaolinite 7Å/10Å-halloysite occurs in all deposits. The North-eastern pegmatite produces kaolin constituted only by euhedral kaolinites with an absence of halloysite. Kaolin from granites generally has higher iron levels when compared with pegmatite and deposits constituted only by kaolinite are rare, a mixture of kaolinite/7Å-halloysite being common. Both the pegmatite and granite derived kaolin are utilised as a paper filler and in general ceramics. Volcanic rocks on alteration produce a fine siliceous clay with titania levels higher than other types and are generally mixtures of kaolinite-7Å. Volcanic derived clays are utilized locally in ceramics. Kaolins derived from anorthosite are similar in iron and titania levels to those from granitic kaolins. Assemblages of kaolinite and small quantities of 7Å-halloysite are found. These clays are used in both whiteware ceramics and paper filler.

Mineralogical and chemical characteristics of marble of Bela Pola deposite

International Nuclear Information System (INIS)

Shijakova-Ivanova, Tena; Boev, Blazho; Panov, Zoran; Pavlov, Dejan

2009-01-01

This paper presents mineralogical characteristics of marbles from the Bela Pola deposit. We have made mineralogical-chemical analyses of marbles and associated minerals in them. The investigation was carried out at the Faculty of natural and technical sciences - Shtip. Marbles from Bela Pola are dolomite and dolomite-calcite types. Microscope investigations have shown that marbles from Bela Pola have granoblastic structure but at some places it can be found with porphyroblastic structures. Percentage on calcite and dolomite is: 94.08% dolomite, 6.25% is calcite in white marbles. On the other hand calcite is present with 93% in gray marbles. Except dolomite and calcite also appear the following accessoring minerals: quartz, fluorite, corundum and paragonite. In general, after summarizing all the facts, which have resulted from this research we could say that, the Bela Pola marbles are massive, compact and white with high quality. In accordance to all formerly mentioned features, this marbles can be classified in the commercial group of marbles suitable for external application or internal design

Thermodynamic modeling of mineralogical phases formed by continuous casting powders

International Nuclear Information System (INIS)

Romo-Castaneda, Julio; Cruz-Ramirez, Alejandro; Romero-Serrano, Antonio; Vargas-Ramirez, Marissa; Hallen-Lopez, Manuel

2011-01-01

A great amount of mineralogical phases were predicted and represented in stability phase diagrams, which were obtained by the use of the thermodynamic software FACTSage considering both the chemical composition and the melting temperature of the mould flux. Melting-solidification tests on commercial mould flux glasses for thin slab casting of steel revealed the existence of cuspidine (Ca 4 Si 2 O 7 F 2 ) as the main mineralogical phase formed during the flux solidification by X-ray powder diffraction (XRD). This phase directly influences the heat transfer phenomena from the strand to the mould and it is obtained with higher fluorite content (22% CaF 2 ). Cuspidine is desirable only in fluxes to produce medium carbon (included peritectic grade) steels, because it reduces the heat flux from the strand to the mould, thus controlling the shrinkage rate during the flux solidification. The experimental results are in agreement with those obtained by the thermodynamic software. The stability phase diagrams could be used as an important tool in the flux design for continuous casting process.

Thermodynamic modeling of mineralogical phases formed by continuous casting powders

Energy Technology Data Exchange (ETDEWEB)

Romo-Castaneda, Julio [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F. (Mexico); Cruz-Ramirez, Alejandro, E-mail: alcruzr@ipn.mx [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F. (Mexico); Romero-Serrano, Antonio; Vargas-Ramirez, Marissa; Hallen-Lopez, Manuel [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F. (Mexico)

2011-01-10

A great amount of mineralogical phases were predicted and represented in stability phase diagrams, which were obtained by the use of the thermodynamic software FACTSage considering both the chemical composition and the melting temperature of the mould flux. Melting-solidification tests on commercial mould flux glasses for thin slab casting of steel revealed the existence of cuspidine (Ca{sub 4}Si{sub 2}O{sub 7}F{sub 2}) as the main mineralogical phase formed during the flux solidification by X-ray powder diffraction (XRD). This phase directly influences the heat transfer phenomena from the strand to the mould and it is obtained with higher fluorite content (22% CaF{sub 2}). Cuspidine is desirable only in fluxes to produce medium carbon (included peritectic grade) steels, because it reduces the heat flux from the strand to the mould, thus controlling the shrinkage rate during the flux solidification. The experimental results are in agreement with those obtained by the thermodynamic software. The stability phase diagrams could be used as an important tool in the flux design for continuous casting process.

Determination of heavy metals and other elements by Neutron Activation Analysis in sediment cores of laguna Mar Chiquita (Cordoba, Argentina)

International Nuclear Information System (INIS)

Larizzatti, Flavio Eduardo

2001-01-01

Laguna Mar Chiquita is one of the largest water bodies of South America. It is a big lake of saline waters, and its geographic localization is SOMS' S, 62 deg 30' W, about 150 km Northwest of Cordoba, Argentina. Due to its large variability of hydrological budget, surface and water levels produced periods of low stands (LLP) and high stands (HLP). This fluctuation of water level also produces substantial changes in the water salinity. The principal tributary of the Laguna Mar Chiquita is Dulce River and also receives water from two other rivers: Suquia and Xanaes. The Suquia River drains in a small satellite lake, the Laguna del Plata. The purpose of the present work was to investigate the sediment composition of the Laguna Mar Chiquita (2 sediment cores) and del Plata (one sediment core) by using Neutron Activation Analysis (NAA) technique. The three 60 cm long sediment cores, sliced each 2 cm, were analyzed and 26 elements were determined (As, Ba, Br, Ce, Co, Cr, Cs, Eu, Fe, Hf, La, Lu, Na, Nd, Rb, Sb, Sc, Se, Sm, Ta, Tb, Th, U, Yb, Zn e Zr). Other complementary techniques were utilized: macro elements (Al, Ca, Fe, K, Mg, Mn, Na, P, Si, Ti) were determined by X-ray fluorescence, and the mineralogical composition of the sediments was determined by X-ray diffraction. The results obtained did not show any indication of anthropic contribution in the sediment composition, and concentration of the majority of the elements analyzed is uniform along the entire profile of the analyzed core. Statistical analysis of elemental concentrations (Cluster Analysis) reflects that in Laguna del Plata the fine fractions of the sediments is dominated by detrital minerals, while in the Laguna Mar Chiquita, the neo formed minerals are the principal components. In both lakes, it was possible to identify compositional variations in the sediment segments, which may correspond to temporal fluctuations in the sedimentation conditions. The statistical analysis associated to sedimentation

Experimental examination of the Mg-silicate-carbonate system at ambient temperature: Implications for alkaline chemical sedimentation and lacustrine carbonate formation

Science.gov (United States)

Tutolo, Benjamin M.; Tosca, Nicholas J.

2018-03-01

Despite their clear economic significance, Cretaceous presalt carbonates of the South Atlantic continental margins are not well-described by published facies models. This knowledge gap arises, in part, because the chemical processes that generate distinctive sedimentary products in alkaline, non-marine environments are poorly understood. Here, we use constraints inferred from reported mineralogical and geochemical features of presalt carbonate rocks to design and perform a suite of laboratory experiments to quantify the processes of alkaline chemical sedimentation. Using real-time observations of in-situ fluid chemistry, post-experiment analysis of precipitated solids, and geochemical modeling tools, we illustrate that spherulitic carbonates and Mg-silicate clays observed in presalt carbonates were likely precipitated from elevated pH (∼10-10.5) waters with high concentrations of silica and alkali cations typical of intermediate to felsic rocks, such as Na+ and K+. Charge balance constraints require that these cations were not counterbalanced to any significant degree by anions typical of seawater, such as Cl- and SO4-, which implies minimal seawater involvement in presalt deposition. Experimental data suggest that, at this alkaline pH, only modest concentrations (i.e., ∼0.5-1 mmol/kg) of Ca++ would have been required to precipitate spheroidal CaCO3. Given the rapid rates of CaCO3 nucleation and growth under such conditions, it is unlikely that Ca++ concentrations in lake waters ever exceeded these values, and sustained chemical fluxes are therefore required for extensive sediment accumulation. Moreover, our experiments indicate that the original mineralogy of presalt CaCO3 could have been calcite or aragonite, but the differing time scales of precipitation between CaCO3 and Mg-silicates would have tended to skew the Mg/Ca ratio in solution towards elevated values which favor aragonite. Mg-silicate nucleation and growth rates measured during our experiments

Oxidative dissolution potential of biogenic and abiogenic TcO2 in subsurface sediments

International Nuclear Information System (INIS)

Fredrickson, J.K.; Zachara, J.M.; Plymale, A.E.; Heald, S.M.; McKinley, J.P.; Kennedy, D.W.; Liu, C.; Nachimuthu, P.

2009-01-01

Technetium-99 (Tc) is an important fission product contaminant associated with sites of nuclear fuels reprocessing and geologic nuclear waste disposal. Tc is highly mobile in its most oxidized state (Tc(VII)O 4 - ) and less mobile in the reduced form (Tc(IV)O 2 · nH 2 O). Here we investigate the potential for oxidation of Tc(IV) that was heterogeneously reduced by reaction with biogenic Fe(II) in two sediments differing in mineralogy and aggregation state; unconsolidated Pliocene-age fluvial sediment from the upper Ringold (RG) Formation at the Hanford Site and a clay-rich saprolite from the Field Research Center (FRC) background site on the Oak Ridge Site. Both sediments contained Fe(III) and Mn(III/IV) as redox active phases, but FRC also contained mass-dominant Fe-phyllosilicates of different types. Shewanella putrefaciens CN32 reduced Mn(III/IV) oxides and generated Fe(II) that was reactive with Tc(VII) in heat-killed, bioreduced sediment. After bioreduction and heat-killing, biogenic Fe(II) in the FRC exceeded that in RG by a factor of two. More rapid reduction rates were observed in the RG that had lower biogenic Fe(II), and less particle aggregation. EXAFS measurements indicated that the primary reduction product was a TcO 2 -like phase in both sediments. The biogenic redox product Tc(IV) oxidized rapidly and completely in RG when contacted with air. Oxidation, in contrast, was slow and incomplete in the FRC, in spite of similar molecular scale speciation of Tc compared to RG. X-ray microprobe, electron microprobe, X-ray absorption spectroscopy, and micro X-ray diffraction were applied to the whole sediment and isolated Tc-containing particles. These analyses revealed that non-oxidizable Tc(IV) in the FRC existed as complexes with octahedral Fe(III) within intra-grain domains of 50-100 (micro)m-sized, Fe-containing micas presumptively identified as celadonite. The markedly slower oxidation rates in FRC as compared to RG were attributed to mass

Oxidative dissolution potential of biogenic and abiogenic TcO 2 in subsurface sediments

Science.gov (United States)

Fredrickson, James K.; Zachara, John M.; Plymale, Andrew E.; Heald, Steve M.; McKinley, James P.; Kennedy, David W.; Liu, Chongxuan; Nachimuthu, Ponnusamy

2009-04-01

Technetium-99 (Tc) is an important fission product contaminant associated with sites of nuclear fuels reprocessing and geologic nuclear waste disposal. Tc is highly mobile in its most oxidized state [Tc(VII)O4-] and less mobile in the reduced form [Tc(IV)O 2· nH 2O]. Here we investigate the potential for oxidation of Tc(IV) that was heterogeneously reduced by reaction with biogenic Fe(II) in two sediments differing in mineralogy and aggregation state; unconsolidated Pliocene-age fluvial sediment from the upper Ringold (RG) Formation at the Hanford Site and a clay-rich saprolite from the Field Research Center (FRC) background site on the Oak Ridge Site. Both sediments contained Fe(III) and Mn(III/IV) as redox active phases, but FRC also contained mass-dominant Fe-phyllosilicates of different types. Shewanella putrefaciens CN32 reduced Mn(III/IV) oxides and generated Fe(II) that was reactive with Tc(VII) in heat-killed, bioreduced sediment. After bioreduction and heat-killing, biogenic Fe(II) in the FRC exceeded that in RG by a factor of two. More rapid reduction rates were observed in the RG that had lower biogenic Fe(II), and less particle aggregation. EXAFS measurements indicated that the primary reduction product was a TcO 2-like phase in both sediments. The biogenic redox product Tc(IV) oxidized rapidly and completely in RG when contacted with air. Oxidation, in contrast, was slow and incomplete in the FRC, in spite of similar molecular scale speciation of Tc compared to RG. X-ray microprobe, electron microprobe, X-ray absorption spectroscopy, and micro X-ray diffraction were applied to the whole sediment and isolated Tc-containing particles. These analyses revealed that non-oxidizable Tc(IV) in the FRC existed as complexes with octahedral Fe(III) within intra-grain domains of 50-100 μm-sized, Fe-containing micas presumptively identified as celadonite. The markedly slower oxidation rates in FRC as compared to RG were attributed to mass

Study of chemical-mineralogical properties of modified soils with polymers addition

Directory of Open Access Journals (Sweden)

Patricio Jonny

2016-01-01

Full Text Available On highways, the soil is considered a supported material and compound pavements layers. For this, they must have such characteristics that confer stability and mechanical resistance to traffic internal forces during the pavement life. When soils do not have required characteristics by the project can be used stabilization techniques that make the natural soil adequately to roads requirement. Based on this assumption, this study aimed to evaluate the efficacy of polymer association in soil stabilization for use in roads pavements. Were evaluated chemical and mineralogical properties on two (2 different soils with sample of pure soil and with the addition of the polymer association. Based on the obtained results, polymer association changes was observed on X-ray fluorescent spectrometry (XRF; X-ray diffraction (XRD; scanning electron microscopy (SEM and Methylene blue. In general, the polymeric association studied in this research was effective in chemical and mineralogical analyzes for use on stabilized soils, making this technique efficient for use in layers of road pavements.

Characterization of raw and burnt oil shale from Dotternhausen: Petrographical and mineralogical evolution with temperature

International Nuclear Information System (INIS)

Thiéry, Vincent; Bourdot, Alexandra; Bulteel, David

2015-01-01

The Toarcian Posidonia shale from Dotternhausen, Germany, is quarried and burnt in a fluidized bed reactor to produce electricity. The combustion residue, namely burnt oil shale (BOS), is used in the adjacent cement work as an additive in blended cements. The starting material is a typical laminated oil shale with an organic matter content ranging from 6 to 18%. Mineral matter consists principally of quartz, feldspar, pyrite and clays. After calcination in the range, the resulting product, burnt oil shale, keeps the macroscopic layered texture however with different mineralogy (anhydrite, lime, iron oxides) and the formation of an amorphous phase. This one, studied under STEM, reveals a typical texture of incipient partial melting due to a long retention time (ca. 30 min) and quenching. An in-situ high temperature X-ray diffraction (HTXRD) allowed studying precisely the mineralogical changes associated with the temperature increase. - Highlights: • We present oil shale/burnt oil shale characterization. • The Posidonia Shale is burnt in a fluidized bed. • Mineralogical evolution with temperature is complex. • The burnt oil shale is used in composite cements

Hydrogeochemical and mineralogical characteristics related to heavy metal attenuation in a stream polluted by acid mine drainage:A case study in Dabaoshan Mine, China

Institute of Scientific and Technical Information of China (English)

Huarong Zhao; Beicheng Xia; Jianqiao Qin; Jiaying Zhang

2012-01-01

Dabaoshan Mine,the largest mine in south China,has been developed since the 1970s.Acid mine drainage (AMD) discharged from the mine has caused severe environmental pollution and human health problems.In this article,chemical characteristics,mineralogy of ocher precipitations and heavy metal attenuation in the AMD are discussed based on physicochemical analysis,mineral analysis,sequential extraction experiments and hydrogeochemistry.The AMD chemical characteristics were determined from the initial water composition,water-rock interactions and dissolved sulfide minerals in the mine tailings.The waters,affected and unaffected by AMD,were Ca-SO4 and Ca-HCO3 types,respectively.The affected water had a low pH,high SO42- and high heavy metal content and oxidation as determined by the Fe2+/Fe3+ couple.Heavy metal and SO42- contents of Hengshi River water decreased,while pH increased,downstream.Schwertmannite was the major mineral at the waste dump,while goethite and quartz were dominant at the tailings dam and streambed.Schwertmannite was transformed into goethite at the tailings dam and streambed.The sulfate ions of the secondary minerals changed from bidentate- to monodentate-complexes downstream.Fe-Mn oxide phases of Zn,Cd and Pb in sediments increased downstream.However,organic matter complexes of Cu in sediments increased further away from the tailings.Fe3+ mineral precipitates and transformations controlled the AMD water chemistry.

The solonetzic process in surface soils and buried paleosols and its reflection in the mineralogical soil memory

Science.gov (United States)

Chizhikova, N. P.; Kovda, I. V.; Borisov, A. V.; Shishlina, N. I.

2009-10-01

The development of the solonetzic process in paleosols buried under kurgans and in the modern surface soils has been studied on the basis of the analysis of the clay (memory“ of the solid-phase soil components. The mineralogical characteristics show that the solonetzic process in the modern background soil is more developed. The mineralogical approach allows us to reveal the long-term changes in the soil status; it is less useful for studying the effect of short-term bioclimatic fluctuations. In the latter case, more labile soil characteristics should be used. The mineralogical method, combined with other methods, becomes more informative upon the study of soil chronosequences. Our studies have shown that the data on the clay minerals in the buried paleosols may contain specific information useful for paleoreconstructions that is not provided by other methods.

Applications of Siroquant in mineralogical analysis at BHP Billiton minerals technology

International Nuclear Information System (INIS)

Reynolds, J.; England, B.M.

2002-01-01

Full text: Newcastle Technology Centre is currently investigating ways of improving the accuracy and efficiency of quantitative mineralogical analysis of iron ores and environmental dusts using Siroquant. The only readily available technique for the quantification of iron oxide and gangue species in iron ores has been the time-consuming modal analysis (point counting) of specially prepared polished sections in reflected light using a petrological microscope. However there are uncertainties associated with bulk sampling and the true reprensensitivity of material mounted in these sections. In addition, the quality of the data depends largely on the training, skill and mineralogical experience of the operator as well as on the quality of the polished section. The data obtained from modal analysis is volumetric and must be converted to weight percent using calculations involving theoretical rather than actual densities. Previous X-ray powder diffraction (XRD) techniques using internal standards (such as corundum) have proved inaccurate and unreliable. To test the validity of using Siroquant to obtain quantitative mineralogical data for iron ores, a series of validation samples was made up to simulate a selection of BHP Billiton iron ores. The results show that reliable and reproducible data can be obtained for hematite/goethite ratios in a wide variety of ore types. However the technique was not without its problems and it was found that particle size, both actual and entered, had a significant effect on the results. It was also found that optimum particle size for samples containing such a wide range of absorption coefficients is smaller than that indicated by standard milling curves, but that longer milling times resulted in overgrinding and non-detection of softer species. Hence the quantification of minor species, especially kaolinite, still presents some problems and these will be investigated through the use of further validation samples. The quantitative

Mineralogical characterization of quarry fines from Tracuateua city, state of Para, Brazil

International Nuclear Information System (INIS)

Costa, J.H.B. da; Negrao, R.C.; Angelica, R.S.; Universidade Federal do Para

2011-01-01

The aim of this study was to characterize the mineralogy quarry fines samples for its reuse and thus contributing to mitigate the environmental impact caused by this waste. In order to achieve the results, samples were collected and prepared for assays and identification of the mineralogical phases present in the quarry fines from the samples. X-ray diffraction and optical microscopy techniques were used. The quarry of fines characterization was based on qualitatively identification the minerals present in the samples. It was detected the presence of quartz, muscovite and feldspar (albite and microclinite) by x-ray diffraction technique and microscopic and macroscopic observations. Moreover, the size distribution was determined, and the samples presented a medium to fine size (ranging from 9,5 mm to 0,075 mm) and the grains presented an irregular and angular shapes. (author)

Investigation of Technetium Redox Cycling in FRC Background Sediments using EXAFS and Gamma Camera Imaging

Energy Technology Data Exchange (ETDEWEB)

Lloyd, J.R.; McBeth, J.M.; Lear, G.; Morris, K.; Burke, I.T.; Livens, F.R.; Ellis, B.; Lawson, R.

2006-04-05

Technetium-99 is a priority pollutant at numerous DOE sites, due to its long half-life (2.1 x 105 years), high mobility as Tc(VII) in oxic waters, and bioavailability as a sulfate analogue. {sup 99}Tc is far less mobile under anaerobic conditions, forming insoluble Tc(IV) precipitates. As anaerobic microorganisms can reduce soluble Tc(VII) to insoluble Tc(IV), microbial metabolism may have the potential to treat sediments and waters contaminated with Tc. Baseline studies of fundamental mechanisms of Tc(VII) bioreduction and precipitation (reviewed by Lloyd et al., 2005, in press) have generally used pure cultures of metal-reducing bacteria, in order to develop conceptual models for the biogeochemical cycling of {sup 99}Tc. There is, however, comparatively little known about interactions of metal-reducing bacteria with environmentally relevant trace concentrations of {sup 99}Tc, against a more complex biogeochemical background provided by mixed microbial communities in aquifer sediments. The objective of this project is to probe the site specific biogeochemical conditions that control the mobility of {sup 99}Tc at the US DOE Field Research Center Site (FRC; Oak Ridge, Tennessee). This information is required for the rational design of in situ bioremediation strategies for technetium-contaminated subsurface environments. We are using a combination of geochemical, mineralogical, microbiological and spectroscopic techniques to determine the solubility and phase associations of {sup 99}Tc in FRC sediments, and characterize the underpinning biogeochemical controls.

Geochemistry and mineralogy of late Quaternary loess in the upper Mississippi River valley, USA: Provenance and correlation with Laurentide Ice Sheet history

Science.gov (United States)

Muhs, Daniel; Bettis, E. Arthur; Skipp, Gary L.

2018-01-01

The midcontinent of North America contains some of the thickest and most extensive last-glacial loess deposits in the world, known as Peoria Loess. Peoria Loess of the upper Mississippi River valley region is thought to have had temporally varying glaciogenic sources resulting from inputs of sediment to the Mississippi River from different lobes of the Laurentide Ice Sheet. Here, we explore a new method of determining loess provenance using K/Rb and K/Ba values (in K-feldspars and micas) in loess from a number of different regions in North America. Results indicate that K/Rb and K/Ba values can distinguish loess originating from diverse geologic terrains in North America. Further, different loess bodies that are known to have had the same source sediments (using other criteria) have similar K/Rb and K/Ba values. We also studied three thick loess sections in the upper Mississippi River valley region. At each site, the primary composition of the loess changed over the course of the last glacial period, and K/Rb and K/Ba values parallel changes in carbonate mineral content and clay mineralogy. We thus confirm conclusions of earlier investigators that loess composition changed as a result of the shifting dominance of different lobes of the Laurentide Ice Sheet and the changing course of the Mississippi River. We conclude that K/Rb and K/Ba values are effective, robust, and rapid indicators of loess provenance that can be applied to many regions of the world.

Geochemistry and mineralogy of late Quaternary loess in the upper Mississippi River valley, USA: Provenance and correlation with Laurentide Ice Sheet history

Science.gov (United States)

Muhs, Daniel R.; Bettis, E. Arthur; Skipp, Gary L.

2018-05-01

The midcontinent of North America contains some of the thickest and most extensive last-glacial loess deposits in the world, known as Peoria Loess. Peoria Loess of the upper Mississippi River valley region is thought to have had temporally varying glaciogenic sources resulting from inputs of sediment to the Mississippi River from different lobes of the Laurentide Ice Sheet. Here, we explore a new method of determining loess provenance using K/Rb and K/Ba values (in K-feldspars and micas) in loess from a number of different regions in North America. Results indicate that K/Rb and K/Ba values can distinguish loess originating from diverse geologic terrains in North America. Further, different loess bodies that are known to have had the same source sediments (using other criteria) have similar K/Rb and K/Ba values. We also studied three thick loess sections in the upper Mississippi River valley region. At each site, the primary composition of the loess changed over the course of the last glacial period, and K/Rb and K/Ba values parallel changes in carbonate mineral content and clay mineralogy. We thus confirm conclusions of earlier investigators that loess composition changed as a result of the shifting dominance of different lobes of the Laurentide Ice Sheet and the changing course of the Mississippi River. We conclude that K/Rb and K/Ba values are effective, robust, and rapid indicators of loess provenance that can be applied to many regions of the world.

Mineralogic studies of tuff for high-level waste disposal

International Nuclear Information System (INIS)

Vaniman, D.; Bish, D.; Broxton, D.; Byers, F.; Carlos, B.; Levy, S.

1986-01-01

The volcanic rocks at Yucca Mountain, Nevada, consist predominantly of tuff that originated 12 to 14 million years ago as flows and airfalls of hot volcanic particulates. On cooling these units formed two major rock types: crystallized zones formed mostly of feldspar and silica minerals, and zones of glass. Alteration of glass to zeolite minerals occurred largely during structural tilting of Yucca Mountain in the ∼1-3 million years following the major eruptions. The compositions of zeolites formed from glasses strongly indicate open-system chemical exchange. Superimposed on this general alteration of glasses are areas of local high-temperature alteration. High-temperature alteration ended by 11 million years ago. Zeolites such as clinoptilolite persisted during high-temperature alteration at temperatures up to 100 degree C, suggesting that clinoptilolite at Yucca Mountain close to the thermally disturbed zone around a repository may also survive heating to temperatures at least this high. The mineralogic data from tuff at Yucca Mountain will ultimately be used by the Department of Energy Nevada Nuclear Waste storage Investigations for (1) defining the mineralogic component in estimating waste element travel times away from the repository and (2) determining the past history of alteration and the anticipated stability of minerals near the repository

Sediment problems in reservoirs. Control of sediment deposits

Energy Technology Data Exchange (ETDEWEB)

Jacobsen, Tom

1997-12-31

When a reservoir is formed on a river, sediment will deposit in the reservoir. Such processes are unfortunate, for instance, for the implementation of hydroelectric energy. This thesis studies the problem of reservoir sedimentation and discusses methods of removing the sediments. Various aspects of reservoir sedimentation are discussed. Anthropogenic impacts seem to greatly affect the erosion processes. Temporal distribution is uneven, mainly because of the very large flood events. A world map showing the Reservoir Capacity: Annual Sediment Inflow ratio for reservoirs with volume equal to 10% of annual inflow has been prepared. The map shows that sedimentation is severe in the western parts of North and South America, eastern, southern and northern Africa, parts of Australia and most of Asia. The development of medium-sized reservoirs is difficult, as they are too large for conventional flushing technique and too small to store the sediment that accumulates during their economic lifetime. A computer model, SSIIM, was used with good results in a case study of two flood drawdown trials in Lake Roxburg, New Zealand. Two techniques have been developed that permits controlled suction of sediment and water into a pipe: the Slotted Pipe Sediment Sluicer (SPSS) and the Saxophone Sediment Sluicer (SSS). The techniques exploit the inflow pattern in through a slot in a pipe. An equation describing this inflow pattern was derived and verified experimentally. The SPSS is fixed near the reservoir bed, and sediment that deposits on top of it is removed in the sluicing process. The SSS sluices sediment from the surface of the sediment deposits. Some technical and economic conditions affecting the economics of sediment removal from reservoirs have been identified and studied. 79 refs., 112 figs., 14 tabs.

Mineralogical characterization of selected shales in support of nuclear waste repository studies: Progress report

Energy Technology Data Exchange (ETDEWEB)

Lee, S.Y.; Hyder, L.K.; Alley, P.D.

1987-12-01

Because baseline characterization of shale mineralogy is critical to the interpretation of results from experiments on radionuclide retardation, groundwater-shale interactions, and physicochemical characteristics, a protocol for quantitative mineralogical analyses has been developed by integrating geochemical and instrumental techniques for the investigation of properties related to repository performance. Thermal analyses were used to estimate total organic matter and carbonate mineral contents. Scanning electron microscope backscattering and elemental mapping of polished sectors and particle-size distribution data were used to estimate the amounts of quartz plus feldspar and pyrite in the shales. X-ray diffraction, neutron activation, and size-distribution data were utilized to estimate phyllosilicate mineral contents. High-resolution transmission electron microscopy was used to identify clay mineral components.

Mineralogical characterization of selected shales in support of nuclear waste repository studies: Progress report

International Nuclear Information System (INIS)

Lee, S.Y.; Hyder, L.K.; Alley, P.D.

1987-12-01

Because baseline characterization of shale mineralogy is critical to the interpretation of results from experiments on radionuclide retardation, groundwater-shale interactions, and physicochemical characteristics, a protocol for quantitative mineralogical analyses has been developed by integrating geochemical and instrumental techniques for the investigation of properties related to repository performance. Thermal analyses were used to estimate total organic matter and carbonate mineral contents. Scanning electron microscope backscattering and elemental mapping of polished sectors and particle-size distribution data were used to estimate the amounts of quartz plus feldspar and pyrite in the shales. X-ray diffraction, neutron activation, and size-distribution data were utilized to estimate phyllosilicate mineral contents. High-resolution transmission electron microscopy was used to identify clay mineral components

Biogeochemical processes controlling authigenic carbonate formation within the sediment column from the Okinawa Trough

Science.gov (United States)

Li, Jiwei; Peng, Xiaotong; Bai, Shijie; Chen, Zhiyan; Van Nostrand, Joy D.

2018-02-01

Authigenic carbonates are one type of conspicuous manifestation in seep environments that can provide long-term archives of past seepage activity and methane cycling in the oceans. Comprehensive investigations of the microbial community functional structure and their roles in the process of carbonate formation are, however, lacking. In this study, the mineralogical, geochemical, and microbial functional composition were examined in seep carbonate deposits collected from the west slope of the northern section of the Okinawa Trough (OT). The aim of this work was to explore the correspondence between the mineralogical phases and microbial metabolism during carbonate deposit formation. The mineralogical analyses indicated that authigenic carbonate minerals (aragonite, magnesium-rich calcite, dolomite, ankerite and siderite) and iron-bearing minerals (limonite, chlorite, and biotite) were present in these carbonate samples. The carbon and oxygen isotopic values of the carbonate samples varied between -51.1‰ to -4.7‰ and -4.8‰ to 3.7‰, respectively. A negative linear correlation between carbon and oxygen isotopic compositions was found, indicating a mixture of methane-derived diagenetic (low δ13C/high 18O) carbonates and detrital origin (high δ13C/low 18O) carbonates at the OT. GeoChip analyses suggested that various metabolic activities of microorganisms, including methanogenesis, methane oxidation, sulfite oxidation, sulfate reduction, and metal biotransformations, all occurred during the formation process. On the basis of these findings, the following model for the methane cycle and seep carbonate deposit formation in the sediment column at the OT is proposed: (1) in the upper oxidizing zone, aerobic methane oxidation was the main way of methane consumption; (2) in the sulfate methane transition zone, sulfate-dependent AOM (anaerobic oxidation of methane) consumes methane, and authigenic minerals such as aragonite, magnesium-calcite, and sulfide minerals

Hillslope curvature, clay mineralogy, and phosphorus adsorption in an Alfisol cultivated with sugarcane Curvaturas de relevo, mineralogia da argila e adsorção de fósforo em Argissolo cultivado com cana-de-açúcar

Directory of Open Access Journals (Sweden)

Diogo Mazza Barbieri

2009-12-01

Full Text Available Hillslope curvatures are associated with specific environments that correlate to chemical and mineralogical attributes of soil, so determining specific management zones. Phosphorus is one of the main limiting factors to the development and longevity of sugarcane. The type and the mineralogical constitution of the clay fraction play an important role in the phosphorus (P adsorption of soil. High proportion of gibbsite (Gb in soil may be the major responsible for P adsorption. The relationships among spatial variability as a function of hillslope curvature, the proportion of kaolinite (Kt and Gb, and phosphorus adsorption were evaluated in an Alfisol cultivated with sugarcane. Two plots of 1 ha of a concave and a convex hillslope area were selected and 121 samples were collected in each area. The maximum P adsorption was determined in six samples taken randomly in each area. Data were submitted to descriptive statistical and geostatistical analysis. The lowest average values of available phosphorus were found in the convex area. In this area, the proportion of gibbsite, expressed by the values of the ratio [Gb/(Gb + Ct] and the values of maximum adsorption capacity of phosphorus were higher than in the concave area.As curvaturas do relevo promovem pedoambientes específicos que condicionam os atributos químicos e mineralógicos do solo e podem auxiliar na definição de zonas específicas de manejo. O fósforo (P é um dos principais elementos limitantes ao desenvolvimento e longevidade do canavial. O teor e a constituição mineralógica da fração argila assumem papel importante na disponibilidade do P, sendo que a gibbsita (Gb, quando presente em altas proporções no solo, pode ser a principal responsável pela sua adsorção e indisponibilidade. Investigaram-se as relações e a variabilidade espacial da adsorção de P e a ocorrência de caulinita (Ct e gibbsita na fração argila de um Argissolo Vermelho-Amarelo eutrófico originado de

Influência da granulometria e da mineralogia sobre a retenção do fósforo em latossolos sob pastagens no cerrado Influence of soil texture and mineralogy on phosphorus retention in cerrado oxisols under pasture

Directory of Open Access Journals (Sweden)

Diogo Néia Eberhardt

2008-06-01

Full Text Available As pastagens abrangem cerca de 50 milhões de hectares na região do Cerrado. Os Latossolos, ocupando aproximadamente a metade da área, são solos intemperizados, constituídos, principalmente de caulinita, óxidos de Fe e Al e estes óxidos têm grande influência na retenção de P. O objetivo deste trabalho foi avaliar os teores totais de P, assim como sua disponibilidade e retenção em Latossolos sob pastagens do Cerrado, e relacionar estes dados com suas características mineralógicas, granulométricas e químicas. As relações entre as características estudadas foram avaliadas por meio da análise de componentes principais e correlações de Pearson. O P disponível resina mostrou-se correlacionado negativamente com as características mineralógicas e granulométricas e positivamente com os teores de matéria orgânica do solo. Tanto os óxidos livres totais como os amorfos tiveram correlações negativas com o P remanescente (Prem. Os teores de gibbsita, goethita e hematita apresentaram correlações negativas com o Prem. Por outro lado, a caulinita não exerceu influência sobre o Prem, indicando a baixa participação desta na adsorção de P nos Latossolos do Cerrado. Observou-se correlação negativa entre o Prem e o C total, explicada pelo fato de o estoque de C aumentar linearmente com o conteúdo de argila e silte no solo. Os óxidos de Fe e Al foram os componentes mineralógicos que exerceram maior influência sobre o Prem.Pastures cover nearly 50 million hectares in the Cerrado region. The Oxisols, which cover approximately half this area, are highly weathered soils composed mainly of kaolinite, iron and aluminum oxides. Iron and aluminum oxides have a great influence on the retention of phosphorus (P in these soils. The aim of this study was to quantify the total phosphorus levels, as well as P availability and retention in Oxisols under pasture in the Cerrado region and to relate the data with soil mineralogical, textural

Speciation and spatial distribution of solid-phase iron in surface sediments of the East China Sea continental shelf

International Nuclear Information System (INIS)

Zhu, Mao-Xu; Hao, Xiao-Chen; Shi, Xiao-Ning; Yang, Gui-Peng; Li, Tie

2012-01-01

Speciation and reactivity characterization of solid-phase Fe in marine sediments are of significance to understanding its heterogeneous mineralogy and crystallinity, the diagenetic cycling of Fe and its regulating roles on many other elements in sediments. In this study, a combination of sequential and single-step extractions was used for the determination of seven Fe pools in surface sediments of the East China Sea (ECS) continental shelf: (1) carbonate associated Fe (Fe(II) carb ) plus acid volatile sulfide-Fe (Fe(II) AVS ), (2) easily reducible amorphous/poorly crystalline Fe oxides (Fe ox1 ), (3) reducible crystalline Fe oxides (Fe ox2 ), (4) magnetite (Fe mag ), (5) poorly reactive sheet silicate Fe (Fe PRS ), (6) pyrite-Fe (Fe py ), and (7) unreactive silicate Fe (Fe U ). Total Fe (Fe T ) in the sediments is largely determined by terrestrial aluminosilicate particles as indicated by a great similarity of the Fe T with that of the Yangtze River and global riverine particulates. The size of Fe PRS is found to be the largest pool, followed by Fe U , Fe ox2 , Fe mag , Fe(II) AVS+carb , Fe ox1 and Fe py . The large Fe PRS may result from neoformation of Fe-rich clay minerals via reverse weathering and subsequent ageing. The small sizes of Fe(II) AVS+carb and Fe py pools is believed to be the result of low SO 4 reduction due to generally low labile organic matter together with the oxic/suboxic, dynamic environments of the surface sediments. The occurrence of Fe ox1 , Fe ox2 and Fe PRS in the sediments is closely associated with the clay fraction as indicated by a high spatial correlation between the former and the latter. Highly reactive Fe(Fe HR ) in the sediments is comparable to that in global marine sediments, but apparently lower than in the Yangtze River and global riverine particulates due probably to sequestration in the Yangtze Estuary. The ratios of Fe HR /Fe T , Fe PR /Fe T and Fe U /Fe T in the ECS surface sediments consistently show more similarity to

Petrology, mineralogy and geochemistry of surficial uranium deposits

International Nuclear Information System (INIS)

Pagel, M.

1984-01-01

A comprehensive understanding of the petrology, mineralogy, and geochemistry of surficial uranium ore deposits is important for developing prospecting and evaluation strategies. Carnotite is the main uranium mineral and is found in those deposits that have the greatest potential uranium resources. The following uranium-bearing minerals have been reported to occur in surficial deposits: carnotite, tyuyamunite, soddyite, weeksite, haiweeite, uranophane, betauranophane, metaankoleite, torbernite, autunite, phosphuranylite, schroeckingerite, Pb-V-U hydroxide (unnamed mineral), uraninite and organourano complexes. The interrelationships between some of the minerals of the host rocks (especially the clays) are not well understood. (author)

Química e mineralogia de solos derivados de rochas do Grupo Bambuí no norte de Minas Gerais

Directory of Open Access Journals (Sweden)

C. V. Oliveira

1998-12-01

Full Text Available Perfis de solos representativos do Distrito Agroindustrial do Jaíba, norte de Minas Gerais, foram descritos morfologicamente, tendo sido suas amostras coletadas e analisadas química, física e mineralogicamente, com o fim de obter informações que contribuam para sua melhor exploração agrícola. Embora provenientes, em sua quase totalidade, de calcário do grupo Bambuí, e com aparente homogeneidade fisiográfica (relevo plano e floresta caducifólia, os solos apresentaram grande diversidade nesses aspectos. Mineralogicamente, observaram-se a ilita e a caulinita como minerais comuns, esta última presente mesmo em Vertissolo e Rendzina, solos com expressiva quantidade de carbonatos livres. A presença de esmectita no Vertissolo, na Rendzina e no Cambissolo de argila de atividade alta indica que a escassez de chuva, a riqueza do material de origem e sua superficialidade em topografia plana dificultam a saída de sílica e bases do sistema, favorecendo a formação de esmectita. Tal mineralogia, associada à sazonalidade climática, parece responsável pelo fendilhamento expressivo desses solos no período seco. Os solos apresentam cores variadas: solos vermelhos e vermelho-amarelados, graças à presença de hematita e goethita, referem-se principalmente aos Latossolos situados em posições ligeiramente mais elevadas na paisagem, dispondo de melhor drenagem; amarelos e bruno-amarelados, normalmente situados em áreas mais deprimidas, que, aliados à superficialidade e massividade do material de origem, restringem a drenagem, favorecendo a gênese da goethita e levando à formação de concreções ferro-manganosas em quantidades expressivas; nestes ambientes, foram constatados Cambissolos de argila de atividade alta (Ta e baixa (Tb, Vertissolos ou solos com características vérticas, também brunados, e Rendzina. A baixa relação Fe o/Fe d (ferro oxalato/ferro ditionito revelou predomínio de óxidos mais cristalinos. Os solos eutr

Field and experimental evidence for coseismic ruptures along shallow creeping faults in forearc sediments of the Crotone Basin, South Italy

Science.gov (United States)

Balsamo, Fabrizio; Aldega, Luca; De Paola, Nicola; Faoro, Igor; Storti, Fabrizio

2014-05-01

Large seismic slip occurring along shallow creeping faults in tectonically active areas represents an unsolved paradox, which is largely due to our poor understanding of the mechanics governing creeping faults, and to the lack of documented geological evidence showing how coseismic rupturing overprints creep in near-surface conditions. In this contribution we integrate field, petrophysical, mineralogical and friction data to characterize the signature of coseismic ruptures propagating along shallow creeping faults affecting unconsolidated forearc sediments of the seismically active Crotone Basin, in South Italy. Field observations of fault zones show widespread foliated cataclasites in fault cores, locally overprinted by sharp slip surfaces decorated by thin (0.5-1.5 cm) black gouge layers. Compared to foliated cataclasites, black gouges have much lower grain size, porosity and permeability, which may have facilitated slip weakening by thermal fluid pressurization. Moreover, black gouges are characterized by distinct mineralogical assemblages compatible with high temperatures (180-200°C) due to frictional heating during seismic slip. Foliated cataclasites and black gouges were also produced by laboratory friction experiments performed on host sediments at sub-seismic (≤ 0.1 m/s) and seismic (1 m/s) slip rates, respectively. Black gouges display low friction coefficients (0.3) and velocity-weakening behaviours, as opposed to high friction coefficients (0.65) and velocity-strengthening behaviours shown by the foliated cataclasites. Our results show that narrow black gouges developed within foliated cataclasites represent a potential diagnostic marker for episodic seismic activity in shallow creeping faults. These findings can help understanding the time-space partitioning between aseismic and seismic slip of faults at shallow crustal levels, impacting on seismic hazard evaluation of subduction zones and forearc regions affected by destructive earthquakes and

Bulk mineralogy of the NE Syrtis and Jezero crater regions of Mars derived through thermal infrared spectral analyses

Science.gov (United States)

Salvatore, M. R.; Goudge, T. A.; Bramble, M. S.; Edwards, C. S.; Bandfield, J. L.; Amador, E. S.; Mustard, J. F.; Christensen, P. R.

2018-02-01

We investigated the area to the northwest of the Isidis impact basin (hereby referred to as "NW Isidis") using thermal infrared emission datasets to characterize and quantify bulk surface mineralogy throughout this region. This area is home to Jezero crater and the watershed associated with its two deltaic deposits in addition to NE Syrtis and the strong and diverse visible/near-infrared spectral signatures observed in well-exposed stratigraphic sections. The spectral signatures throughout this region show a diversity of primary and secondary surface mineralogies, including olivine, pyroxene, smectite clays, sulfates, and carbonates. While previous thermal infrared investigations have sought to characterize individual mineral groups within this region, none have systematically assessed bulk surface mineralogy and related these observations to visible/near-infrared studies. We utilize an iterative spectral unmixing method to statistically evaluate our linear thermal infrared spectral unmixing models to derive surface mineralogy. All relevant primary and secondary phases identified in visible/near-infrared studies are included in the unmixing models and their modeled spectral contributions are discussed in detail. While the stratigraphy and compositional diversity observed in visible/near-infrared spectra are much better exposed and more diverse than most other regions of Mars, our thermal infrared analyses suggest the dominance of basaltic compositions with less observed variability in the amount and diversity of alteration phases. These results help to constrain the mineralogical context of these previously reported visible/near-infrared spectral identifications. The results are also discussed in the context of future in situ investigations, as the NW Isidis region has long been promoted as a region of paleoenvironmental interest on Mars.

Comparative mineralogical characteristics of red soils from South Bulgaria

Directory of Open Access Journals (Sweden)

Marlena Yaneva

2015-01-01

Full Text Available The present study aims to compare mineralogical composition of red soils, formed on marbles in South Bulgaria. We used mineralogical analysis of heavy and light mineral fraction in immersion under polarizing microscope and X-ray diffraction analysis of bulk sample and clay fraction. Three test polygons, located in South Bulgaria were examined: Petrovo, Nova Lovcha and Dobrostan, which are characterized with different latitude, altitude, and exposition. Three or more sites from each polygon were sampled and analyzed. The red soils are formed on white and gray calcite and calcite-dolomite marbles, impure silicate-rich marbles and only in one site – on marble breccias. We determined the following mineral phases in red soils: calcite, dolomite, quarts, and feldspars, mica, illite-type mica, illite, smectite, vermiculite-smectite, and kaolinite. Heavy minerals are represented by amphibole, titanite and epidote, and minor amounts of zircon, garnet, tourmaline, rutile, pyroxene, andalusite, kyanite, sillimanite and apatite. Opaque minerals are predominantly goethite and hematite. Plant tissue is abundant in light fraction from the uppermost soil horizons. Analyses of heavy mineral fraction show presence of metamorphic and igneous minerals which indicate participation of weathering products from other rock types in the nearby area. The types of heavy minerals in soils depend more on composition of parent rocks and geomorphic position than on climate type. Soils from Nova Lovcha show similar composition, but the quantity of goethite and hematite significantly increase in soil from plain. Typical high-metamorphic minerals as andalusite, kyanite and sillimanite present only in Nova Lovcha, while garnet dominates in Petrovo and opaque minerals - in Dobrostan. Red soils, formed on slopes, where erosion prevails over accumulation, contain more illite, smectite and vermiculite-smectite, and very few or no kaolinite, whereas the kaolinite is dominant in soils

Long-distance multistep sediment transfer at convergent plate margins (Barbados, Lesser Antilles)

Science.gov (United States)

Limonta, Mara; Garzanti, Eduardo; Resentini, Alberto; Andò, Sergio; Boni, Maria; Bechstädt, Thilo

2015-04-01

We present a regional provenance study of the compositional variability and long distance multicyclic transport of terrigenous sediments along the convergent and transform plate boundaries of Central America, from the northern termination of the Andes to the Lesser Antilles arc-trench system. We focus on high-resolution bulk-petrography and heavy-mineral analyses of modern beach and fluvial sediments and Cenozoic sandstones of Barbados island, one of the places in the world where an active accretionary prism is subaerially exposed (Speed et al., 2012). The main source of siliciclastic sediment in the Barbados accretionary prism is off-scraped quartzose to feldspatho-litho-quartzose metasedimentaclastic turbidites, ultimately supplied from South America chiefly via the Orinoco fluvio-deltaic system. Modern sand on Barbados island is either quartzose with depleted heavy-mineral suites recycled from Cenozoic turbidites and including epidote, zircon, tourmaline, andalusite, garnet, staurolite and chloritoid, or calcareous and derived from Pleistocene coral reefs. The ubiquitous occurrence of clinopyroxene and hypersthene, associated with green-brown kaersutitic hornblende in the north or olivine in the south, points to reworking of ash-fall tephra erupted from andesitic (St. Lucia) and basaltic (St. Vincent) volcanic centers in the Lesser Antilles arc transported by the prevailing anti-trade winds in the upper troposphere. Modern sediments on Barbados island and those shed by other accretionary prisms such as the Indo- Burman Ranges and Andaman-Nicobar Ridge (Garzanti et al., 2013) define the distinctive mineralogical signature of Subduction Complex Provenance, which is invariably composite. Detritus recycled dominantly from accreted turbidites and oceanic mudrocks is mixed in various proportions with detritus from the adjacent volcanic arc or carbonate reefs widely developed at tropical latitudes. Ophiolitic detritus may be locally prominent. Quantitative provenance

Mineralogical investigations of the area to the North-West of Qattara Depression, Western Desert, Egypt

International Nuclear Information System (INIS)

Tosson, S.; Roshdy, H.M.K.

2000-01-01

Petrophysical and mineralogical investigations are given for subsurface samples from this area. The paper deals with mineralogical investigations of Middle Jurassic, Lower Cretaceous and Upper Cretaceous sedimentary rocks. It includes thin section examinations for 14 samples of sandstone, siltstone and carbonates, and x-ray powder diffraction analyses of some argillaceous samples, untreated and glycolated. It was found that the kaolinite group is the main clay mineral recorded in the argillaceous sandstone and siltstone samples. Illite and montmorillonite are identified in the shale sample representing the Kharita Formation. Siderite was also recorded in the sample. Illite and montmorillonite were recorded as well as kaolinite in two siltstone samples. (Author)

The CheMin XRD on the Mars Science Laboratory Rover Curiosity: Construction, Operation, and Quantitative Mineralogical Results from the Surface of Mars

Science.gov (United States)

Blake, David F.

2015-01-01

The Mars Science Laboratory mission was launched from Cape Canaveral, Florida on Nov. 26, 2011 and landed in Gale crater, Mars on Aug. 6, 2012. MSL's mission is to identify and characterize ancient "habitable" environments on Mars. MSL's precision landing system placed the Curiosity rover within 2 km of the center of its 20 X 6 km landing ellipse, next to Gale's central mound, a 5,000 meter high pile of laminated sediment which may contain 1 billion years of Mars history. Curiosity carries with it a full suite of analytical instruments, including the CheMin X-ray diffractometer, the first XRD flown in space. CheMin is essentially a transmission X-ray pinhole camera. A fine-focus Co source and collimator transmits a 50µm beam through a powdered sample held between X-ray transparent plastic windows. The sample holder is shaken by a piezoelectric actuator such that the powder flows like a liquid, each grain passing in random orientation through the beam over time. Forward-diffracted and fluoresced X-ray photons from the sample are detected by an X-ray sensitive Charge Coupled Device (CCD) operated in single photon counting mode. When operated in this way, both the x,y position and the energy of each photon are detected. The resulting energy-selected Co Kalpha Debye-Scherrer pattern is used to determine the identities and amounts of minerals present via Rietveld refinement, and a histogram of all X-ray events constitutes an X-ray fluorescence analysis of the sample.The key role that definitive mineralogy plays in understanding the Martian surface is a consequence of the fact that minerals are thermodynamic phases, having known and specific ranges of temperature, pressure and composition within which they are stable. More than simple compositional analysis, definitive mineralogical analysis can provide information about pressure/temperature conditions of formation, past climate, water activity and the like. Definitive mineralogical analyses are necessary to establish

Contents and composition of organic matter in subsurface soils affected by land use and soil mineralogy

Science.gov (United States)

Ellerbrock, Ruth H.; Kaiser, Michael

2010-05-01

Land use and mineralogy affect the ability of surface as well as subsurface soils to sequester organic carbon and their contribution to mitigate the greenhouse effect. This study aimed to investigate the long-term impact of land use (i.e., arable and forest) and soil mineralogy on contents and composition of soil organic matter (SOM) from subsurface soils. Seven soils different in mineralogy (Albic and Haplic Luvisol, Colluvic and Haplic Regosol, Haplic and Vertic Cambisol, Haplic Stagnosol) were selected within Germany. Soil samples were taken from forest and adjacent arable sites. First, particulate and water soluble organic matter were separated from the subsurface soil samples. From the remaining solid residues the OM(PY) fractions were separated, analyzed for its OC content (OCPY) and characterized by FTIR spectroscopy. For the arable subsurface soils multiple regression analyses indicate significant positive relationships between the soil organic carbon contents and the contents of i) exchangeable Ca and oxalate soluble Fe, and Alox contents. Further for the neutral arable subsurface soils the contents OCPY weighted by its C=O contents were found to be related to the contents of Ca indicating interactions between OM(PY) and Ca cations. For the forest subsurface soils (pH <5) the OCPY contents were positively related with the contents of Na-pyrophosphate soluble Fe and Al. For the acidic forest subsurface soils such findings indicate interactions between OM(PY) and Fe3+ and Al3+ cations. The effects of land use and soil mineralogy on contents and composition of SOM and OM(PY) will be discussed.

Occurrence and distribution of selected heavy metals in the surface sediments of South Brittany coastal waters: An assessment using pollution indicators

Science.gov (United States)

Ong, M. C.; Menier, D.; Noor Azhar, M. S.; Dupont, V.; Révillon, S.

2012-04-01

In order to avoid the pollution of heavy metals in South Brittany water, it is necessary to establish the data and understand the mechanisms influencing the distribution of heavy metals of the area. One of the aims of this work was to assess heavy metals contamination in Gulf of Morbihan and Quiberon Bay. Another aim was to use interpolation surfaces per metals to assess the contamination separately per metal. A total of 196 bottom sediment samples were collected from the coastal waters in order to determine the spatial concentration of Cr, Mn, Co, Cu, Zn, Cd and Pb by Inductively Coupled Plasma Mass Spectrometry (ICPMS) after acid digestion. The average heavy metal concentrations are ranked as follows: Mn>Zn>Cr>Pb>Cu>Cu>Cd. In the gulf, metal enrichments observed compared to the bay environment may due river run-off from three major river (Auray, Le Marle and Novalo rivers) which carried municipal waste and maritime activities along the coastal area within the gulf. Beside those factors, the natural factors such as the sheltered basin morphology itself, fine sediment and low hydrodynamic regime which favour the in situ accumulation of pollutants. The level of pollution levels attributed to heavy metals was evaluated using several pollution indicators in order to determine anthropogenically derived sediment contamination. Comparison to sediment quality guidelines (SQGs), enrichment factors (EFs), index of geoaccumulation (Igeo) and contamination factors (CF) based on reference element and background value to compensate for the influence of the natural variability in sediment mineralogy and to assess whether the concentration observed in surface sediment represent background and contaminated levels and visualize using ArcGIS software. These analyses validated that the bottom sediment only enriched in Pb and the other metals in most sample are not due to artificial contamination. Overall, geochemistry of the samples show the effect of both natural and anthropogenic

Assessment of a sequential extraction protocol by examining solution chemistry and mineralogical evolution

Science.gov (United States)

Maubec, Nicolas; Pauwels, Hélène; Noël, Hervé; Bourrat, Xavier

2015-04-01

Knowledge of the behavior of heavy metals, such as copper and zinc in sediments, is a key factor to improve the management of rivers. The mobility of these metals, which may be harmful to the environment, depends directly on their concentration and speciation , which in turn depend on physico-chemical parameters such as mineralogy of the sediment fraction, pH, redox potential, salinity etc ... (Anderson et al., 2000; Sterckeman et al., 2004; Van Oort et al., 2008). Several methods based on chemical extractions are currently applied to assess the behavior of heavy metals in soils and sediments. Among them, sequential extraction procedure is widely used in soil and sediment science and provides details about the origin, biological and physicochemical availability, mobilization and transports of trace metals elements. It is based on the use of a series of extracting reagents to extract selectively heavy metals according to their association within the solid phase (Cornu and Clozel, 2000) including the following different fraction : exchangeable, bound to carbonates, associated to oxides (reducible fraction), linked to organic matter and sulfides (oxidizable fraction) as well as silicate minerals so called residual fraction (Hickey and Kittrick, 1984; Tessier et al., 1979). Consequently sequential extraction method is expected to simulate a lot of potential natural and anthropogenic modifications of environmental conditions (Arey et al., 1999; Brannon and Patrick, 1987; Hickey and Kittrick, 1984; La Force et al., 1999; Tessier et al., 1979). For three decades, a large number of protocols has been proposed, characterized by specific reagents and experimental conditions (concentrations, number of steps, extraction orders and solid/solution ratio) (Das et al., 1995; Gomez Ariza et al., 2000; Quevauviller et al., 1994; Rauret, 1998; Tack and Verloo, 1995), but it appeared that several of them suffer from a lack of selectivity of applied reagents: besides target ones, some

The Evolution of Juventae Chasma, Valles Marineris, Mars: Progressive Collapse and Sedimentation

Science.gov (United States)

Fueten, F.; Novakovic, N.; Stesky, R.; Flahaut, J.; Hauber, E.; Rossi, A. P.

2017-11-01

Juventae Chasma is an isolated chasm located north of the interconnected chasms within Valles Marineris. It contains four separate interior layered deposit (ILD) mounds. We have combined layer measurements, as well as mineralogical data of the mounds with topographic data of the remaining chasm and the surrounding plateau. Our observations indicate that the chasm underwent a complex geological history. We suggest that individual ILD mounds are not contemporaneous with each other and a series of progressive collapses enlarged an initially smaller chasm to its current shape. ILDs were deposited in a lacustrine setting, and the time of ILD deposition was limited. Basin collapse and chasm enlargement continued beyond the time of ILD deposition and thus were not driven by sediment load. Glacial processes appear to have played a role in the late, postlacustrine history of the chasm. We present a simplified model that highlights some of the complexity of the chasm evolution, but acknowledge that the true history is undoubtedly more complicated.

Clays for brick manufacturing in Actopan, Hidalgo: physical, chemical and mineralogical characterization

Energy Technology Data Exchange (ETDEWEB)

Moreno-Tovar, Raul; Yañez-Hernández, Osiris Annel; Pérez-Moreno, Fidel; Rodríguez-Lugo, Ventura [Área de Ciencias de la Tierra y Materiales, Universidad Autónoma del Estado de Hidalgo (Mexico); Rivera, José de Jesús Cruz [Universidad Autónoma de San Luis Potosí (Mexico); Rivera, Ana Leonor, E-mail: analeonor.ventura.2016@gmail.com [Universidad Nacional Autónoma de México, DF (Mexico)

2017-10-15

Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 μm to 90 μm wide subhedral structures formed by particles from 2.0 μm to 5.0 μm; and rombohedrales forms 40 μm wide, 70 µm long, constituted of silicon, aluminum, iron, titanium, calcium, minor amounts of potassium, magnesium, and sodium. Minerals such as quartz, albite, cristobalite, calcium and Hematite phases were recognized by X-Ray Diffraction technique. Chemical analysis by atomic emission spectrometry with Inductively Coupled Plasma confirmed this mineralogy composition while laser granulometry method found the same particle size. Grain size analysis determined submicrometric dimensions, and multimodal type curves, that can be interpreted as the mixing of two or more different mineral phases in each sample. (author)

Chemical, mineralogical and ceramic properties of clays from Northern Santa Catarina, Brazil

International Nuclear Information System (INIS)

Correia, S.L.; Bloot, E.L.; Folgueras, M.V.; Hotza, D.

2009-01-01

Clay materials crop out in the northern Santa Catarina mining district were investigated in order to assess their potential in the ceramic industry. Four different clays (A, B, C and D) were selected. Their chemical composition was obtained by Xray fluorescence and their mineralogy by X-ray diffraction, coupled with numerical rational analysis. Their thermal behaviour was studied by differential thermal analysis. Technological testing consisted in a simulation of the industrial processing performed at a laboratory scale. The test pieces were obtained by pressing and fired in the range of 850-1200 deg C. In each case their technological properties were studied. The main mineralogical phases detected were kaolinite, quartz and mica. Hematite and feldspars may be present in the clays. The clays show two groups of particle sizes almost equally frequent in the range of 1 to 60 μm. The northern Santa Catarina clays are suitable for the production of bricks and earthenware in the 900- 1100 deg C range. (author)

Clays for brick manufacturing in Actopan, Hidalgo: physical, chemical and mineralogical characterization

International Nuclear Information System (INIS)

Moreno-Tovar, Raul; Yañez-Hernández, Osiris Annel; Pérez-Moreno, Fidel; Rodríguez-Lugo, Ventura; Rivera, José de Jesús Cruz; Rivera, Ana Leonor

2017-01-01

Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 μm to 90 μm wide subhedral structures formed by particles from 2.0 μm to 5.0 μm; and rombohedrales forms 40 μm wide, 70 µm long, constituted of silicon, aluminum, iron, titanium, calcium, minor amounts of potassium, magnesium, and sodium. Minerals such as quartz, albite, cristobalite, calcium and Hematite phases were recognized by X-Ray Diffraction technique. Chemical analysis by atomic emission spectrometry with Inductively Coupled Plasma confirmed this mineralogy composition while laser granulometry method found the same particle size. Grain size analysis determined submicrometric dimensions, and multimodal type curves, that can be interpreted as the mixing of two or more different mineral phases in each sample. (author)

Determination of distribution coefficient (Kd's) of some artificial and naturally occurring radionuclide in fresh and marine coastal water sediment

International Nuclear Information System (INIS)

Al-Masri, M. S.; Mamish, S; Haleem, M. A.

2004-12-01

Distribution coefficients of artificial and natural radionuclides in fresh and marine water sediment are used in modeling radionuclide dispersion in water system, and the radiation risk and environmental investigating of impact of radioactive emissions, due to routine operations of nuclear plants or disposal and burial of radioactive waste in the environment. In the present work, distribution coefficient of uranium, lead, polonium, radium (naturally occurring radionuclides that may be emitted into the Syrian environment by the phosphate and oil industry with relatively high concentrations) and caesium 137 and strontium 85, in fresh water sediment (Euphrates River, Orantos River and Mzzerib Lake) and marine coastal water (Lattakia, Tartous and Banias). Distribution coefficients were found to vary between (5.8-17.18)*10 3 , (2.2-8.11)*10 3 , (0.22-2.08)*10 3 , (0.16-0.19)*10 3 , (0.38-0.69)*10 3 and 49-312 for polonium, lead, uranium, radium, cesium and strontium respectively. Results have indicated that most measurement distribution coefficients in the present study were lower than those values reported in IAEA documents for marine coastal sediment. In addition, variations of Kd's with aqueous phase composition and sediment elemental and mineralogical composition and its total organic materials content have been studied, where liner correlation coefficients for each isotope with different parameters have been determined. The obtained data reported in this study can be used for radioactive contaminants dispersion and transfer in Syrian river, lake and coast to assess risks to public due to discharges of the phosphate and oil industry into the Syrian environment. (Authors)

Mineral composition of sediments underlying the Velenje lignite seam in the P-9k/92 borehole (Slovenia

Directory of Open Access Journals (Sweden)

Teja Čeru

2015-07-01

Full Text Available The paper presents the results of granulometrical, geochemical and mineralogical characterisation of sediments underlying the Velenje lignite seam as drilled through the P-9k/92 borehole in the central part of the Pliocene intermontane Velenje Basin. This study of differently lithified sediments/sedimentary rocks is based on analyses of 32 samples from 21 core intervals at the depth of 562.6–580.0 m (end of the borehole. Grain size was analysed on 12 samples, 24 samples were investigated geochemically, while mineral composition was obtained with X-ray diffraction (XRD on 23 samples, and optical microscopy was performed on 7 samples. Granulometry of very low lithified samples revealed that they are mostly clayey silts (>85 % of the silt fraction, only two are silty sands and one is pebbly/rubbly sandstone. Well-lithified clastics are all sandstones cemented by calcite, siderite and/or marcasite. Geochemical analysis indicated that most samples are SiO2 + Al2O3 rich (>60–80 %. Some sediments, mostly at the base of the profile, are enriched in Fe2O3 and inorganic C both indicating the presence of siderite. At the top of the profile, thin limestone and gravelly sandstone beds contain a high CaO content and have high loss on ignition (LOI. Qualitative XRD analysis and microscopy showed that all clastic sediments consist of quartz, kaolinite and muscovite/illite. Feldspars occur sporadically, mainly in sands and sandstones. Gypsum was found in some samples of siltstones. Pyrite occurs only in a sample of limestone at the top of the profile. Also marcasite was found only in one sample.

Caracterização química e mineralógica de agregados de diferentes classes de tamanho de Latossolos Bruno e Vermelho localizados no estado do Paraná Chemical and mineralogical characterization of the different structure size classes of Red-Yellow and Dusky Red Latosols in Paraná, Brazil

Directory of Open Access Journals (Sweden)

Vander de Freitas Melo

2008-02-01

Full Text Available O teor e a forma dos minerais da fração argila são determinantes na definição da morfologia dos agregados do solo. Objetivando estudar a mineralogia da fração argila e as propriedades químicas de diferentes classes de agregados de Latossolos (Latossolo Bruno Ácrico húmico - LBd e Latossolo Vermelho Distroférrico húmico - LVdf originados de rochas basálticas no Estado do Paraná, coletaram-se amostras indeformadas em diferentes profundidades (horizontes Bw1 e Bw2 em perfis de solos localizados em duas toposseqüências (quatro perfis no LBd e três no LVdf. Após secagem e separação das amostras indeformadas em seis classes de agregados (2-4; 1-2; 0,5-1; 0,25-0,5; 0,105-0,25; The content and shap of clay minerals are important in the definition of soil structure morphology. To evaluate the clay mineralogy and chemical properties of different aggregate size-classes of Latosols (Red-Yellow - LBd and Dusky Red - LVdf derived from basalt in the state of Paraná, Brazil, soil samples of the Bw1 and Bw2 horizons were collected in four LBd and three LVdf profiles, distributed across two distinct toposequences. Dried and undisturbed soil samples were separated into six size-classes (2-4; 1-2; 0.5-1; 0.25-0.5; 0.105-0.25; < 0.105 mm and the soluble Si in 0,5 mol L-1 acetic acid and exchangeable K, Ca, Mg and Al contents were determined. The clay fraction extracted from each aggregate size-class was investigated by X-ray diffraction, thermal analysis and chemical analysis. The content of exchangeable elements did not vary among the aggregate size-classes in the Bw1 and Bw2 horizons for Red-Yellow and Dusky Red Latosol profiles. In spite of the high and continuous weathering of these soils the mineralogical characteristics of the aggregate clay fraction were not homogenized. The highest variation in the mineral contents, according to the aggregate size class, was observed for the profile in the highest position of the LBd toposequence; the

Ma_MISS on ExoMars: Mineralogical Characterization of the Martian Subsurface

Science.gov (United States)

De Sanctis, Maria Cristina; Altieri, Francesca; Ammannito, Eleonora; Biondi, David; De Angelis, Simone; Meini, Marco; Mondello, Giuseppe; Novi, Samuele; Paolinetti, Riccardo; Soldani, Massimo; Mugnuolo, Raffaele; Pirrotta, Simone; Vago, Jorge L.; Ma_MISS Team

2017-07-01

The Ma_MISS (Mars Multispectral Imager for Subsurface Studies) experiment is the visible and near infrared (VNIR) miniaturized spectrometer hosted by the drill system of the ExoMars 2020 rover. Ma_MISS will perform IR spectral reflectance investigations in the 0.4-2.2 μm range to characterize the mineralogy of excavated borehole walls at different depths (between 0 and 2 m). The spectral sampling is about 20 nm, whereas the spatial resolution over the target is 120 μm. Making use of the drill's movement, the instrument slit can scan a ring and build up hyperspectral images of a borehole. The main goal of the Ma_MISS instrument is to study the martian subsurface environment. Access to the martian subsurface is crucial to our ability to constrain the nature, timing, and duration of alteration and sedimentation processes on Mars, as well as habitability conditions. Subsurface deposits likely host and preserve H2O ice and hydrated materials that will contribute to our understanding of the H2O geochemical environment (both in the liquid and in the solid state) at the ExoMars 2020 landing site. The Ma_MISS spectral range and sampling capabilities have been carefully selected to allow the study of minerals and ices in situ before the collection of samples. Ma_MISS will be implemented to accomplish the following scientific objectives: (1) determine the composition of subsurface materials, (2) map the distribution of subsurface H2O and volatiles, (3) characterize important optical and physical properties of materials (e.g., grain size), and (4) produce a stratigraphic column that will inform with regard to subsurface geological processes. The Ma_MISS findings will help to refine essential criteria that will aid in our selection of the most interesting subsurface formations from which to collect samples.

Mineralogy, stratigraphy, and provenance of soil coverbeds in the Kumara district, Westland

International Nuclear Information System (INIS)

Neall, V.E.; Stewart, R.B.; Wallace, R.C.; Williams, M.C.; Mew, G.

2001-01-01

The sand and silt mineralogy of four soils preserved on fluvioglacial outwash terraces at Kumara indicates that the main soil body is developed in up to 1 m of loessial coverbeds that accumulated subsequent to cessation of gravel terrace formation. Oxygen isotope abundances of the dominant mineral quartz in these soils show a higher temperature origin for the >250 micro-m fraction, consistent with derivation from local granodiorites. Finer quartz is of a mixed provenance origin consistent with the variety of rock types in the region. The finest quartz, <5 micro-m, of aerosolic origin, can be used as a proxy time record for the coverbed accumulations. The widespread 22 590 yr BP Aokautere Ash chronohorizon is preserved in three of the profiles, whilst wind redeposition of the glass shards is responsible for traces of rhyolitic glass in all subsequent horizons. Widespread landscape erosion is postulated either immediately before or during deposition of the K-1 terrace, so that similar subsequent coverbed sequences ae preserved on the K-1 and all older terraces in this district. Magnetic mineral assemblages in the profiles indicate a slightly different loessial provenance for the Cockeye, K-1, and K-2.1 profiles, but the K-2.2 is significantly different from the rest. This is probably a function of aeolian winnowing and variablity of source materials. In the past, different mountain catchments have connected with different lower river reaches, due to transcurrent movement on the Alpine Fault. This is interpreted as having led to changing provenance of river sediment supplying loess to local soils. (author). 39 refs.,10 figs., 4 tabs

Sand and clay mineralogy of sal forest soils of the Doon Siwalik ...

Indian Academy of Sciences (India)

3Forest Soil & Land Reclamation Division, Forest Research Institute, Dehradun 248 006, India. .... also helps in characterizing the soil mineralogical make-up in relation to the growth and develop- ment of the species essential for sustainable forest management. ...... and Weed S B (Madison: Soil Science Society of America).

Pedogennyje i litogennyje osobennosti mineralogičeskogo sostava černozema na krasnocvetnych porodach

Czech Academy of Sciences Publication Activity Database

Lesovaja, S. N.; Kapička, Aleš; Petrovský, Eduard; Aparin, B. F.

2003-01-01

Roč. 36, č. 12 (2003), s. 1482-1490 ISSN 0032-180X Grant - others:RFFI(RU) 01-04-48815 Institutional research plan: CEZ:AV0Z3012916 Keywords : mineralogical composition * chernozem * magnetic minerals Subject RIV: DE - Earth Magnetism, Geodesy, Geography

Mineralogical aspects of the laterites of Maicuru

International Nuclear Information System (INIS)

Lemos, V.P.; Costa, M.C. da

1989-01-01

This paper presents the prelimary mineralogical data of the weathering materials derived from the alkaline-ultramafic-carbonatitic Maicuru complex, State of Para. These material include several minerals species: iron, titanium and aluminium oxides/hydroxides as aluminous goethite, geothite, hematite, maghemite, lepidocrocite, anatase; and gibbsite; clay minerals of the smectite, chlorite, vermiculite and kaolinite groups and interstratified chlorite-smectite, mica-vermiculite, vermiculite-chlorite and Kaolinite-smectite; and aluminous phosphates of the crandalite group, wardite, augelite, senegalite, wavelite and variscite. The principal characteristics of these minerals were obtained by X-ray diffraction, optical methods, electron probe microanalysis, energy dispersive scanning electron microscope, X-ray fluorescence, atomic absorption, inductively coupled plasma-ICP source spectrometry and colorimetric methods. (author) [pt

Post-depositional redistribution of trace metals in reservoir sediments of a mining/smelting-impacted watershed (the Lot River, SW France)

International Nuclear Information System (INIS)

Audry, Stephane; Grosbois, Cecile; Bril, Hubert; Schaefer, Joerg; Kierczak, Jakub; Blanc, Gerard

2010-01-01

Mining/smelting wastes and reservoir sediment cores from the Lot River watershed were studied using mineralogical (XRD, SEM-EDS, EMPA) and geochemical (redox dynamics, selective extractions) approaches to characterize the main carrier phases of trace metals. These two approaches permitted determining the role of post-depositional redistribution processes in sediments and their effects on the fate and mobility of trace metals. The mining/smelting wastes showed heterogeneous mineral compositions with highly variable contents of trace metals. The main trace metal-bearing phases include spinels affected by secondary processes, silicates and sulfates. The results indicate a clear change in the chemical partitioning of trace metals between the reservoir sediments upstream and downstream of the mining/smelting activities, with the downstream sediments showing a 2-fold to 5-fold greater contribution of the oxidizable fraction. This increase was ascribed to stronger post-depositional redistribution of trace metals related to intense early diagenetic processes, including dissolution of trace metal-bearing phases and precipitation of authigenic sulfide phases through organic matter (OM) mineralization. This redistribution is due to high inputs (derived from mining/smelting waste weathering) at the water-sediment interface of (i) dissolved SO 4 promoting more efficient OM mineralization, and (ii) highly reactive trace metal-bearing particles. As a result, the main trace metal-bearing phases in the downstream sediments are represented by Zn- and Fe-sulfides, with minor occurrence of detrital zincian spinels, sulfates and Fe-oxyhydroxides. Sequestration of trace metals in sulfides at depth in reservoir sediments does not represent long term sequestration owing to possible resuspension of anoxic sediments by natural (floods) and/or anthropogenic (dredging, dam flush) events that might promote trace metal mobilization through sulfide oxidation. It is estimated that, during a major

Cyclic Sediment Trading Between Channel and River Bed Sediments

Science.gov (United States)

Haddadchi, A.

2015-12-01

Much of the previous work on sediment tracing has focused on determining either the initial sources of the sediment (soils derive from a particular rock type) or the erosion processes generating the sediment. However, alluvial stores can be both a source and sink for sediment transported by streams. Here geochemical and fallout radionuclide tracing of river-bed and alluvial sediments are used to determine the role of secondary sources, sediment stores, as potential sources of sediment leaving Emu Creek catchment, southeastern Queensland, Australia. Activity concentrations of 137Cs on the river sediments are consistent with channel erosion being the dominant source at all sites sampled along the river. To characterise the deposition and remobilisation cycles in the catchment, a novel geochemical tracing approach was used. Successive pockets of alluvium were treated as discrete sink terms within geochemical mixing models and their source contributions compared with those of river bed sediments collected adjacent to each alluvial pocket. Three different size fractions were examined; silts and clays (banks indicates a high degree of 'trading' between the fluvial space and the alluvial space. Hence, management works aimed at primarily reducing the supply of sediments to the outlet of Emu Creek should focus on rehabilitation of channel banks in the lower catchment.

Toward an understanding of "Legacy P" - phosphorus sorption mechanisms in stream sediments as influenced by organic matter

Science.gov (United States)

Audette, Yuki; O'Halloran, Ivan P.; Nowell, Peter M.; Congreves, Katelyn; Voroney, R. Paul

2017-04-01

Water chemistry and phosphorus (P) forms were analyzed to determine the nature of legacy P in sediments of the West Holland River and the adjacent drainage canals of the Holland Marsh drainage system, located in southern Ontario, Canada. The river and canals route water from the intensively cropped muck polders of the Holland Marsh and drain Lake Simcoe. Sediment samples were characterized for mineralogy using X-ray diffraction techniques (XRD); total P (TP); and Ca, Fe, Mn, and Mg contents, as well as cation exchange capacity and organic matter (OM) content. Forms of sediment P in five depth sections (ranging from 0-15 cm depth) were characterized and quantified by sequential P fractionation chemistry. At all study sites, mobile P forms including organic P forms were found to be higher in surface sediments than in deeper sediments. The major P form within the sediments of the two canal sites, where the concentration of TP in the surface water was within the Ontario Provincial Water Quality Objectives (PWQO) of 0.03 mg P L-1, was Ca-bound P, indicating a low risk of soluble reactive P (SRP) release. A trace of apatite (a stable Ca-P mineral) was also detected in these sediments. Conversely, sediments collected from the West Holland River at sites located within the Holland Marsh exhibited a high risk of SRP release, and redox-sensitive P was the dominant P form in the sediment despite the surface water exhibiting higher concentration of Ca and alkaline pH. In addition, the concentrations of TP as measured in surface water samples taken from the site were 8 times greater than PWQO. In the sediments where the risk of SRP release was high, OM contents were also relatively high and traces of brushite (a labile Ca-P mineral) were detected. The formation of OM and cation complexes, such as OM-Fe complexes, may play an important role in regulating the fate of sediment-P forms through the adsorption of SRP. These OM-Fe complexes may inhibit the formation of more stable Ca

Detection and context of hydrated mineralogy in the Tyrrhena Terra region, Mars

Science.gov (United States)

den Haan, J.; Zegers, T. E.; van Ruitenbeek, F. J. A.; van der Werff, H. M. A.; Rossi, A.

2008-09-01

Introduction The discovery of phyllosilicates on Mars [1] has had major implications on the perceived geologic and climatologic evolution of Mars [2]. Not only do phyllosilicates represent a `wet' period on Mars, they might also represent a potentially favorable environment for life. The phyllosilicates have so far exclusively been found in or close to ancient Noachian highland terrain. Those phyllosilicate deposits studied (e.g. [3]) show a clear association between hydrated mineralogy and heavily eroded and crater-saturated outcrops. Phyllosilicates on Earth are associated with a wide variety of geological processes (volcanism, metamorphism, hydrothermal alteration, sedimentation). The occurrence of phyllosilicates on Mars may be equally diverse in nature. To be able to place constraints on the early Martian environment, the processes by which these phyllosilicates formed need to be reconstructed. To derive this information from individual phyllosilicate deposits, it is necessary to interpret their composition in relation to their geological context and relative time relationships. We conducted such an integrated hyperspectral and geological study of the Tyrrhena Terra region. Data products ad methods HRSC data products (both image at 12 m/pixel and stereo-derived DTMs) are used for examining geologic cross-cutting relationships, geomorphologic landforms and visual determination of unit boundaries. Odyssey THEMIS nighttime TIR images are analyzed for spatial variations in thermal inertia. Where available, HRSC is supplemented by higher-resolution visible observations of CTX or MOC. Hyperspectral analysis is conducted using data from the OMEGA hyperspectral instrument. In order to batch-process large amounts of OMEGA data, an IDL/ENVI tool was developed on top of the existing SOFT04, distributed by PSA. The applied atmospheric correction assumes that atmospheric contributions are multiplicative, and follow a power-law distribution with altitude [4]. The ratio of

Nagra technical report 14-02, Geological basics - Dossier VI - Barrier properties of proposed host rock sediments and neighbouring rock; SGT Etappe 2: Vorschlag weiter zu untersuchender geologischer Standortgebiete mit zugehörigen Standortarealen für die Oberflächenanlage -- Geologische Grundlagen -- Dossier VI -- Barriereneigenschaften der Wirt- und Rahmengesteine

Energy Technology Data Exchange (ETDEWEB)

Gautschi, A.; Deplazes, G.; Traber, D.; Marschall, P. [National Cooperative for the Disposal of Radioactive Waste (NAGRA), Wettingen (Switzerland); Mazurek, M.; Gimmi, T.; Maeder, U. [Institute of Geological Sciences, University of Berne, Berne (Switzerland)

2014-12-15

This dossier is the sixth of a series of eight reports concerning the safety and technical aspects of locations for the disposal of radioactive wastes in Switzerland. It discusses the barrier properties of the proposed host rock sediments and neighbouring rock layers. The mineralogical composition of the host rocks are discussed as are their pore densities and hydrological properties. Diffusion aspects are discussed. The aquifer systems in the proposed depository areas and their classification are looked at. The barrier properties of the host rocks and those of neighbouring sediments are discussed. Finally, modelling concepts and parameters for the transport of radionuclides in the rocks are discussed.

Effect of Aggregate Mineralogy and Concrete Microstructure on Thermal Expansion and Strength Properties of Concrete

Directory of Open Access Journals (Sweden)

Jinwoo An

2017-12-01

Full Text Available Aggregate type and mineralogy are critical factors that influence the engineering properties of concrete. Temperature variations result in internal volume changes could potentially cause a network of micro-cracks leading to a reduction in the concrete’s compressive strength. The study specifically studied the effect of the type and mineralogy of fine and coarse aggregates in the normal strength concrete properties. As performance measures, the coefficient of thermal expansion (CTE and compressive strength were tested with concrete specimens containing different types of fine aggregates (manufactured and natural sands and coarse aggregates (dolomite and granite. Petrographic examinations were then performed to determine the mineralogical characteristics of the aggregate and to examine the aggregate and concrete microstructure. The test results indicate the concrete CTE increases with the silicon (Si volume content in the aggregate. For the concrete specimens with higher CTE, the micro-crack density in the interfacial transition zone (ITZ tended to be higher. The width of ITZ in one of the concrete specimens with a high CTE displayed the widest core ITZ (approx. 11 µm while the concrete specimens with a low CTE showed the narrowest core ITZ (approx. 3.5 µm. This was attributed to early-age thermal cracking. Specimens with higher CTE are more susceptible to thermal stress.

Comparison of the Mineralogy of Comet Wild 2 Coma Grains to Other Astromaterials

Science.gov (United States)

Frank, David; Zolensky, Michael

2010-01-01

We propose that Kuiper Belt samples (in this case comet coma grains from the Jupiter family comet Wild 2) are recognizably different from the bulk of materials in outer belt asteroids, because of their different formation positions and times in the early solar system. We believe this despite similarities found between some Wild 2 grains and components of carbonaceous chondrites (i.e. some CAI and chondrules). Kuiper Belt samples must preserve measurable mineralogical and compositional evidence of formation at unique positions and times in the early solar nebula, and these formational differences must have imparted recognizable special characteristics. We hypothesize that these characteristics include: (1) Unique major element compositional ranges of common astromaterial minerals, especially olivine and pyroxene; (2) Unique minor element compositions of major silicate phases, especially olivine and low-Ca pyroxene; (3) Degree and effects of radiation processing -- including amorphous rims, metal coatings, and Glass with Embedded Metal and Sulfides (GEMS); (4) Presence of abundant presolar silicate grains as recognized by anomalous oxygen in silicates; (5) Oxidation state of the mineral assemblage. We are working our way through all available Wild 2 samples, selecting 1-2 non-consecutive viable TEM grids from each possible extracted Wild 2 grain. We especially prefer TEM grids from grains for which complete mineralogical details have not been published (which is to say the majority of the extracted grains). We are performing a basic mineralogic survey by E-beam techniques, to establish the essential features of the extracted Wild 2 grains. We are making a particular effort to carefully and accurately measure minor elements of olivine and pyroxene, as these minerals are widespread in astromaterials, and comparisons of their compositions will serve to place the Wild 2 silicates in contact with asteroids, meteorites and chondritic interplanetary dust particles

Qualitative mineralogical characterization of the sinter by X-ray diffraction

International Nuclear Information System (INIS)

Greca, M.C.; Pietroluongo, L.R.V.; Baliza, S.V.; Costa Pereira, E.A. da

1987-01-01

This paper aims the qualitative mineralogical characterization of sinters and raw materials employed on its fabrication, via X-ray diffraction technique. Thus, sample with constant coke breeze content and variable contents of sand, limestone, dunite and dolomite were prepared to obtain current sinter compositions, with variable basicity. The tests were performed at the research of the following institutions: Companhia Siderurgica Nacional, Centro de Tecnologia Mineral and Instituto Nacional de Tecnologia. (author) [pt

Characterization of sediment from the dredging of storm water channels in the city of Salvador-BA, Brazil aiming to use in structural ceramics

International Nuclear Information System (INIS)

Santos, O.C.; Breitenbach, S.B.; Coelho, R.E.; Andrade, J.C.S.; Sales Junior, J.C.C.; Paskocimas, C.A.; Martinelli, A.E.; Nascimento, R.M.

2017-01-01

The aim of this study was to characterize sediment from the dredging of storm water channels (Scp) in the city of Salvador, Bahia, aiming its maximum replacement by clay in structural ceramics, since this binary mixture is part of the pilot project of the standard mass, in the research of interlocked block ceramic formulation. Initially, the sediment was submitted to the following tests: plasticity index; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; thermal and particle size analyses. The morphology of the material was analyzed by scanning electron microscopy, coupled with energy dispersive spectroscopy. Then, sediment (Scp) was added to clay from the municipality of Candelas, Bahia, in the proportions of 10, 20, 30 and 40 wt%. Specimens were prepared by uniaxial pressing in dimensions of 60 mm x 20 mm, with compacting pressure of 25 MPa, and the material was humidified with 8% of water. Firing was conducted in resistive furnace at temperatures of 850, 950 and 1050 deg C, with 5 deg C / min heating rate. The properties evaluated were: linear shrinkage; water absorption and modulus of rupture. The results indicated the possibility of using SCP in structural ceramics by the prerequisites required in standards, in the manufacture of tiles, sealing blocks and bricks. (author)

Geochemical and physical properties, distribution coefficients of soils and sediments at the Olkiluoto Island and in the reference area in 2010-2011

International Nuclear Information System (INIS)

Lahdenperae, A.-M.

2014-04-01

The report summarises the chemical, physical and mineralogical data and the calculated 'in situ' distribution coefficients (K d ) values of the indigenous elements from the different types of soil and sediment samples at the Olkiluoto Island and in the Reference area that were taken in 2010-2011. The data has been collected in order to extend the understanding of the site evolution and for radionuclide transport analyses and modelling. 'In situ' distribution coefficients, K d values are used to indicate the relevant mobility of elements and radionuclides. This report is part of the entirety of soil and sediment data from different soil types, soil layers and environmental conditions collected earlier for the biosphere site description and development. Soil and sediment samples were taken at various depths of humus, peat, gyttja, sandy/fine sandy till and cropland soils. The analyses procedure varied to some extent between the samples. In all samples were analysed pH, LOI, C, N, and the total concentrations of the elements using HNO 3 -HF extraction. The 'in situ' K d values were calculated using the formula by Sheppard et al.. For selected samples the easily leachable fraction was analysed by NH 4 Ac (pH 4.5). Bulk density and mineralogy was determined for a few samples. Grain size distribution was measured only from till samples. The results are discussed and the physical-chemical data and distribution coefficients of the results are presented. The cation exchange capacity and base saturation are calculated for the sandy/fine sandy till samples from Olkiluoto. The K d values of the important indigenous elements Ag, Cl, Cs, I, Mo, Ni, Se and Sr are of main interest in biosphere development due to the longest half-lives of the associated radionuclides, thus having long interaction times. The K d data are inherently extremely variable due to nature of practical quantity in question, aggregating a number of processes into a single value, but the data also vary

Geochemical and physical properties, distribution coefficients of soils and sediments at the Olkiluoto Island and in the reference area in 2010-2011

Energy Technology Data Exchange (ETDEWEB)

Lahdenperae, A.-M. [Saanio and Riekkola Oy, Helsinki (Finland)

2014-04-15

The report summarises the chemical, physical and mineralogical data and the calculated 'in situ' distribution coefficients (K{sub d}) values of the indigenous elements from the different types of soil and sediment samples at the Olkiluoto Island and in the Reference area that were taken in 2010-2011. The data has been collected in order to extend the understanding of the site evolution and for radionuclide transport analyses and modelling. 'In situ' distribution coefficients, K{sub d} values are used to indicate the relevant mobility of elements and radionuclides. This report is part of the entirety of soil and sediment data from different soil types, soil layers and environmental conditions collected earlier for the biosphere site description and development. Soil and sediment samples were taken at various depths of humus, peat, gyttja, sandy/fine sandy till and cropland soils. The analyses procedure varied to some extent between the samples. In all samples were analysed pH, LOI, C, N, and the total concentrations of the elements using HNO{sub 3}-HF extraction. The 'in situ' K{sub d} values were calculated using the formula by Sheppard et al.. For selected samples the easily leachable fraction was analysed by NH{sub 4}Ac (pH 4.5). Bulk density and mineralogy was determined for a few samples. Grain size distribution was measured only from till samples. The results are discussed and the physical-chemical data and distribution coefficients of the results are presented. The cation exchange capacity and base saturation are calculated for the sandy/fine sandy till samples from Olkiluoto. The K{sub d} values of the important indigenous elements Ag, Cl, Cs, I, Mo, Ni, Se and Sr are of main interest in biosphere development due to the longest half-lives of the associated radionuclides, thus having long interaction times. The K{sub d} data are inherently extremely variable due to nature of practical quantity in question, aggregating a number of

Biogeochemical Controls on Technetium Mobility in Biogeochemical Controls on Technetium Mobility in FRC Sediments

International Nuclear Information System (INIS)

Lloyd, J.R.; McBeth, J.M.; Livens, F.R.; Bryan, N.D.; Ellis, B.; Sharma, H.; Burke, I.T.; Morris, K.

2004-01-01

Technetium-99 is a priority pollutant at numerous DOE sites, due to its long half-life (2.1 x 10 5 years), high mobility as Tc(VII) in oxic waters, and bioavailability as a sulfate analog. 99 Tc is far less mobile under anaerobic conditions, forming insoluble Tc(IV) precipitates. As anaerobic microorganisms can reduce soluble Tc(VII) to insoluble Tc(IV), microbial metabolism may have the potential to treat sediments and waters contaminated with Tc. Baseline studies of fundamental mechanisms of Tc(VII) bioreduction and precipitation (reviewed by Lloyd et al, 2002) have generally used pure cultures of metal-reducing bacteria, in order to develop conceptual models for the biogeochemical cycling of Tc. There is, however, comparatively little known about interactions of metal-reducing bacteria with environmentally relevant trace concentrations of Tc, against a more complex biogeochemical background provided by mixed microbial communities in the subsurface. The objective of this new NABIR project is to probe the site specific biogeochemical conditions that control the mobility of Tc at the FRC (Oak Ridge, TN). This information is required for the rational design of in situ bioremediation strategies for technetium-contaminated subsurface environments. We will use a combination of geochemical, mineralogical, microbiological and spectroscopic techniques to determine the solubility and phase associations of Tc in FRC sediments, and characterize the underpinning biogeochemical controls. A key strength of this project is that many of the techniques we are using have already been optimized by our research team, who are also studying the biogeochemical controls on Tc mobility in marine and freshwater sediments in the UK in a NERC funded companion study.

Suspended sediment and sediment-associated contaminants in San Francisco Bay

Science.gov (United States)

Schoellhamer, D.H.; Mumley, T.E.; Leatherbarrow, J.E.

2007-01-01

Water-quality managers desire information on the temporal and spatial variability of contaminant concentrations and the magnitudes of watershed and bed-sediment loads in San Francisco Bay. To help provide this information, the Regional Monitoring Program for Trace Substances in the San Francisco Estuary (RMP) takes advantage of the association of many contaminants with sediment particles by continuously measuring suspended-sediment concentration (SSC), which is an accurate, less costly, and more easily measured surrogate for several trace metals and organic contaminants. Continuous time series of SSC are collected at several sites in the Bay. Although semidiurnal and diurnal tidal fluctuations are present, most of the variability of SSC occurs at fortnightly, monthly, and semiannual tidal time scales. A seasonal cycle of sediment inflow, wind-wave resuspension, and winnowing of fine sediment also is observed. SSC and, thus, sediment-associated contaminants tend to be greater in shallower water, at the landward ends of the Bay, and in several localized estuarine turbidity maxima. Although understanding of sediment transport has improved in the first 10 years of the RMP, determining a simple mass budget of sediment or associated contaminants is confounded by uncertainties regarding sediment flux at boundaries, change in bed-sediment storage, and appropriate modeling techniques. Nevertheless, management of sediment-associated contaminants has improved greatly. Better understanding of sediment and sediment-associated contaminants in the Bay is of great interest to evaluate the value of control actions taken and the need for additional controls. ?? 2007 Elsevier Inc. All rights reserved.

Quantitative mineralogical analysis of sandstones using x-ray diffraction techniques

International Nuclear Information System (INIS)

Ward, C.R.; Taylor, J.C.

1999-01-01

Full text: X-ray diffraction has long been used as a definitive technique for mineral identification based on the measuring the internal atomic or crystal structures present in powdered rocks; soils and other mineral mixtures. Recent developments in data gathering and processing, however, have provided an improved basis for its use as a quantitative tool, determining not only the nature of the minerals but also the relative proportions of the different minerals present. The mineralogy of a series of sandstone samples from the Sydney and Bowen Basins of eastern Australia has been evaluated by X-ray diffraction (XRD) on a quantitative basis using the Australian-developed SIROQUANT data processing technique. Based on Rietveld principles, this technique generates a synthetic X-ray diffractogram by adjusting and combining full-profile patterns of minerals nominated as being present in the sample and interactively matches the synthetic diffractogram under operator instructions to the observed diffractogram of the sample being analysed. The individual mineral patterns may be refined in the process, to allow for variations in crystal structure of individual components or for factors such as preferred orientation in the sample mount. The resulting output provides mass percentages of the different minerals in the mixture, and an estimate of the error associated with each individual percentage determination. The chemical composition of the mineral mixtures indicated by SIROQUANT for each individual sandstone studied was estimated using a spreadsheet routine, and the indicated proportion of each oxide in each sample compared to the actual chemical analysis of the same sandstone as determined independently by X-ray fluorescence spectrometry. The results show a high level of agreement for all major chemical constituents, indicating consistency between the SIROQUANT XRD data and the whole-rock chemical composition. Supplementary testing with a synthetic corundum spike further

Correlated Amino Acid and Mineralogical Analyses of Milligram and Submilligram Samples of Carbonaceous Chondrite Lonewolf Nunataks 94101

Science.gov (United States)

Burton, S.; Berger, E. L.; Locke, D. R.; Lewis, E. K.

2018-01-01

Amino acids, the building blocks of proteins, have been found to be indigenous in the eight carbonaceous chondrite groups. The abundances, structural, enantiomeric and isotopic compositions of amino acids differ significantly among meteorites of different groups and petrologic types. These results suggest parent-body conditions (thermal or aqueous alteration), mineralogy, and the preservation of amino acids are linked. Previously, elucidating specific relationships between amino acids and mineralogy was not possible because the samples analyzed for amino acids were much larger than the scale at which petrologic heterogeneity is observed (sub mm-scale differences corresponding to sub-mg samples); for example, Pizzarello and coworkers measured amino acid abundances and performed X-ray diffraction (XRD) on several samples of the Murchison meteorite, but these analyses were performed on bulk samples that were 500 mg or larger. Advances in the sensitivity of amino acid measurements by liquid chromatography with fluorescence detection/time-of-flight mass spectrometry (LC-FD/TOF-MS), and application of techniques such as high resolution X-ray diffraction (HR-XRD) and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) for mineralogical characterizations have now enabled coordinated analyses on the scale at which mineral heterogeneity is observed. In this work, we have analyzed samples of the Lonewolf Nunataks (LON) 94101 CM2 carbonaceous chondrite. We are investigating the link(s) between parent body processes, mineralogical context, and amino acid compositions in meteorites on bulk samples (approx. 20mg) and mineral separates (< or = 3mg) from several of spatial locations within our allocated samples. Preliminary results of these analyses are presented here.

A scientific approach to the attribution problem of renaissance ceramic productions based on chemical and mineralogical markers

Science.gov (United States)

Padeletti, G.; Fermo, P.

2010-09-01

Renaissance lustred majolica shards from Gubbio and Deruta (Central Italy) were investigated in order to point out differences in chemical and mineralogical composition between these two very similar Italian potteries and furthermore to find correlations with the local raw clay materials probably used for their production. Chemical and mineralogical analysis on the ceramic body were performed by ICP-OES (inductively coupled plasma optical emission spectroscopy) and XRD (X-ray diffraction), respectively. Investigation of the ceramic body revealed significant differences on calcium content indicating that it could be used as a marker for the two different productions. A separation of the ceramic shards in groups, on the base of their provenance, has been achieved applying to the data set formed by the chemical compositional data some multivariate techniques, such as PCA (principal component analysis) and HCA (hierarchical cluster analysis). Even the mineralogical composition of the groups shows very interesting features, differing Gubbio production from Deruta one for the presence of several mineralogical species. The investigations carried out on clays that were collected in the two geographical places have confirmed these differences. In fact, the clay materials have a chemical composition coherent with that one found in the shards. Firing tests performed by heating these clay in different conditions (temperature and soaking time) have shown a different behaviour as concerns the formation of the minerals and it is compatible with the shard composition found. From the comparison between the fired clay and the ceramic shards, some assumptions about the firing conditions applied by the ancient potters have been drawn.

On the role of clay and its mineralogic components in low- and intermediary-level radioactive waste disposal

International Nuclear Information System (INIS)

Craciun, C.; Balan, V.

2001-01-01

In site selection for radioactive waste disposal a special attention is paid to clay and its mineralogic components as it has an important potential of retarding for both the radionuclides in radioactive wastes and fluid dynamics in the disposal site. The most frequent reaction implied in the radioisotope migration from liquid to solid phase is the cationic exchange. This work aimed at finding the relationship of clay and its mineralogic components, on one hand, and the exchange properties of the deposits, on the other hand. These relationships are based on the data obtained from about 50 cores sampled in 5 drillings performed in Saligny site, selected for radioactive waste disposal. Four levels different from physical, chemical and mineralogical properties were evidenced. The ionic exchange rate, with values within 5 to 30 me/100 g, has a trend of reflecting the clay contents. The relations between the cationic exchange rate and the clay contents appears to be linear with correlation coefficients varying within 0.81 - 0.97. The mineralogical composition of clay includes smectite (predominantly), illite and kaolin. Close, linear relations between the cationic exchange rate and the smectite fraction in clay and deposits were established with correlation coefficients within 0.74-0.76 and 0.85-0.95, respectively. These results show that the potential of the investigated deposits of acting as natural barriers with retarding effects on both radionuclides and the fluids in the disposal zone is strongly correlated to the amount and the content of the clay in these deposits

The contribution of bank and surface sediments to fluvial sediment ...

African Journals Online (AJOL)

The contribution of bank and surface sediments to fluvial sediment transport of the Pra River. ... the relative contribution of surface and bank sediments to the fluvial sediment transport. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

X-Ray Diffraction and Fluorescence Instrument for Mineralogical Analysis at the Lunar Surface, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — We propose to develop LUNA, a compact and lightweight X-Ray Diffraction (XRD) / X-Ray Fluorescence (XRF) instrument for mineralogical analysis of regolith, rock...

X-Ray Diffraction and Fluorescence Instrument for Mineralogical Analysis at the Lunar Surface, Phase I

Data.gov (United States)