PEP computer control system

International Nuclear Information System (INIS)

1979-03-01

This paper describes the design and performance of the computer system that will be used to control and monitor the PEP storage ring. Since the design is essentially complete and much of the system is operational, the system is described as it is expected to 1979. Section 1 of the paper describes the system hardware which includes the computer network, the CAMAC data I/O system, and the operator control consoles. Section 2 describes a collection of routines that provide general services to applications programs. These services include a graphics package, data base and data I/O programs, and a director programm for use in operator communication. Section 3 describes a collection of automatic and semi-automatic control programs, known as SCORE, that contain mathematical models of the ring lattice and are used to determine in real-time stable paths for changing beam configuration and energy and for orbit correction. Section 4 describes a collection of programs, known as CALI, that are used for calibration of ring elements

Analysis of reaction cross-section production in neutron induced fission reactions on uranium isotope using computer code COMPLET.

Science.gov (United States)

Asres, Yihunie Hibstie; Mathuthu, Manny; Birhane, Marelgn Derso

2018-04-22

This study provides current evidence about cross-section production processes in the theoretical and experimental results of neutron induced reaction of uranium isotope on projectile energy range of 1-100 MeV in order to improve the reliability of nuclear stimulation. In such fission reactions of 235 U within nuclear reactors, much amount of energy would be released as a product that able to satisfy the needs of energy to the world wide without polluting processes as compared to other sources. The main objective of this work is to transform a related knowledge in the neutron-induced fission reactions on 235 U through describing, analyzing and interpreting the theoretical results of the cross sections obtained from computer code COMPLET by comparing with the experimental data obtained from EXFOR. The cross section value of 235 U(n,2n) 234 U, 235 U(n,3n) 233 U, 235 U(n,γ) 236 U, 235 U(n,f) are obtained using computer code COMPLET and the corresponding experimental values were browsed by EXFOR, IAEA. The theoretical results are compared with the experimental data taken from EXFOR Data Bank. Computer code COMPLET has been used for the analysis with the same set of input parameters and the graphs were plotted by the help of spreadsheet & Origin-8 software. The quantification of uncertainties stemming from both experimental data and computer code calculation plays a significant role in the final evaluated results. The calculated results for total cross sections were compared with the experimental data taken from EXFOR in the literature, and good agreement was found between the experimental and theoretical data. This comparison of the calculated data was analyzed and interpreted with tabulation and graphical descriptions, and the results were briefly discussed within the text of this research work. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Internal anatomy of the hornbill casque described by radiography, contrast radiography, and computed tomography.

Science.gov (United States)

Gamble, Kathryn C

2007-03-01

Hornbills are distinguished from most other avian taxa by the presence of a casque on the dorsal maxillary beak, which, in all but 1 of the 54 extant hornbill species, is described as essentially an air-filled cavity enclosed by minimal cancellous bone. The external casque has been described in detail, but little has been described about its internal anatomy and the communications between the casque and the paranasal sinuses. In this study, 10 intact casque and skull specimens of 7 hornbill species were collected opportunistically at necropsy. The anatomy of the casque and the skull for each of the specimens was examined by radiography, contrast radiography, and computed tomography. After imaging, 8 specimens were submitted for osteologic preparation to directly visualize the casque and the skull interior. Through this standardized review, the baseline anatomy of the internal casque was described, including identification of a novel casque sinus within the paranasal sinus system. These observations will assist clinicians in the diagnosis and treatment of diseases of the casque in hornbill species.

A comparison of hardware description languages. [describing digital systems structure and behavior to a computer

Science.gov (United States)

Shiva, S. G.

1978-01-01

Several high level languages which evolved over the past few years for describing and simulating the structure and behavior of digital systems, on digital computers are assessed. The characteristics of the four prominent languages (CDL, DDL, AHPL, ISP) are summarized. A criterion for selecting a suitable hardware description language for use in an automatic integrated circuit design environment is provided.

Cross-section methodology in SIMMER

International Nuclear Information System (INIS)

Soran, P.D.

1975-11-01

The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

Cross-section methodology in SIMMER

International Nuclear Information System (INIS)

Soran, P.D.

1976-05-01

The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

Computer-Based Learning: Interleaving Whole and Sectional Representation of Neuroanatomy

Science.gov (United States)

Pani, John R.; Chariker, Julia H.; Naaz, Farah

2013-01-01

The large volume of material to be learned in biomedical disciplines requires optimizing the efficiency of instruction. In prior work with computer-based instruction of neuroanatomy, it was relatively efficient for learners to master whole anatomy and then transfer to learning sectional anatomy. It may, however, be more efficient to continuously…

Emission computed tomography

International Nuclear Information System (INIS)

Ott, R.J.

1986-01-01

Emission Computed Tomography is a technique used for producing single or multiple cross-sectional images of the distribution of radionuclide labelled agents in vivo. The techniques of Single Photon Emission Computed Tomography (SPECT) and Positron Emission Tomography (PET) are described with particular regard to the function of the detectors used to produce images and the computer techniques used to build up images. (UK)

Value of computed tomography pelvimetry in patients with a previous cesarean section

International Nuclear Information System (INIS)

Yamani, Tarik Y.; Rouzi, Abdulrahim A.

1998-01-01

A case-control study was conducted at the Department of Obstetrics and Gynaecology, King Abdulaziz University Hospital, Jeddah, Saudi Arabia to determine the value of computed tomography pelivimetry in patients with a previous cesarean section. Between January 1993 and December 1995, 219 pregnant women with one previous cesarean had antenatal CT pelvimetry for assessment of the pelvis. One hundred and nineteen women did not have CT pelvimetry and served as control. Fifty-one women (51%) in the CT pelvimetry group were delivered by cesarean section. Twenty-three women (23%) underwent elective cesarean section for contracted pelvis based upon the findings of CT pelvimetry and 28 women (28%) underwent emergency cesarean section after trial of labor. In the group who did not have CT pelvimetry, 26 women (21.8%) underwent emergency cesarean section. This was a statistically significant difference (P=0.02). There were no statistically significant differences in birthweight and Apgar scores either group. There was no prenatal or maternal mortality in this study. Computed tomography pelvimetry increased the rate of cesarean delivery without any benefit in the immediate delivery outcomes. Therefore, the practice of documenting the adequacy of the pelvis by CT pelvimetry before vaginal birth after cesarean should be abandoned. (author)

Program POD; A computer code to calculate nuclear elastic scattering cross sections with the optical model and neutron inelastic scattering cross sections by the distorted-wave born approximation

International Nuclear Information System (INIS)

Ichihara, Akira; Kunieda, Satoshi; Chiba, Satoshi; Iwamoto, Osamu; Shibata, Keiichi; Nakagawa, Tsuneo; Fukahori, Tokio; Katakura, Jun-ichi

2005-07-01

The computer code, POD, was developed to calculate angle-differential cross sections and analyzing powers for shape-elastic scattering for collisions of neutron or light ions with target nucleus. The cross sections are computed with the optical model. Angle-differential cross sections for neutron inelastic scattering can also be calculated with the distorted-wave Born approximation. The optical model potential parameters are the most essential inputs for those model computations. In this program, the cross sections and analyzing powers are obtained by using the existing local or global parameters. The parameters can also be inputted by users. In this report, the theoretical formulas, the computational methods, and the input parameters are explained. The sample inputs and outputs are also presented. (author)

A computer code for calculating neutron cross-sections from resonance parameter data

International Nuclear Information System (INIS)

Mill, A.J.

1979-08-01

A computer code, XSEC, has been written which calculates neutron cross-sections from resonance data. Although the program was originally written in order to identify neutron 'windows' in enriched nuclides, it may be used to evaluate the total neutron cross-section of any medium mass nuclide at intermediate energies. XSEC has proved very useful in identifying suitable nuclides for use as neutron filters at intermediate energies. (author)

An Equivalent cross-section Framework for improving computational efficiency in Distributed Hydrologic Modelling

Science.gov (United States)

Khan, Urooj; Tuteja, Narendra; Ajami, Hoori; Sharma, Ashish

2014-05-01

While the potential uses and benefits of distributed catchment simulation models is undeniable, their practical usage is often hindered by the computational resources they demand. To reduce the computational time/effort in distributed hydrological modelling, a new approach of modelling over an equivalent cross-section is investigated where topographical and physiographic properties of first-order sub-basins are aggregated to constitute modelling elements. To formulate an equivalent cross-section, a homogenization test is conducted to assess the loss in accuracy when averaging topographic and physiographic variables, i.e. length, slope, soil depth and soil type. The homogenization test indicates that the accuracy lost in weighting the soil type is greatest, therefore it needs to be weighted in a systematic manner to formulate equivalent cross-sections. If the soil type remains the same within the sub-basin, a single equivalent cross-section is formulated for the entire sub-basin. If the soil type follows a specific pattern, i.e. different soil types near the centre of the river, middle of hillslope and ridge line, three equivalent cross-sections (left bank, right bank and head water) are required. If the soil types are complex and do not follow any specific pattern, multiple equivalent cross-sections are required based on the number of soil types. The equivalent cross-sections are formulated for a series of first order sub-basins by implementing different weighting methods of topographic and physiographic variables of landforms within the entire or part of a hillslope. The formulated equivalent cross-sections are then simulated using a 2-dimensional, Richards' equation based distributed hydrological model. The simulated fluxes are multiplied by the weighted area of each equivalent cross-section to calculate the total fluxes from the sub-basins. The simulated fluxes include horizontal flow, transpiration, soil evaporation, deep drainage and soil moisture. To assess

PREFACE: Special section on Computational Fluid Dynamics—in memory of Professor Kunio Kuwahara Special section on Computational Fluid Dynamics—in memory of Professor Kunio Kuwahara

Science.gov (United States)

Ishii, Katsuya

2011-08-01

This issue includes a special section on computational fluid dynamics (CFD) in memory of the late Professor Kunio Kuwahara, who passed away on 15 September 2008, at the age of 66. In this special section, five articles are included that are based on the lectures and discussions at `The 7th International Nobeyama Workshop on CFD: To the Memory of Professor Kuwahara' held in Tokyo on 23 and 24 September 2009. Professor Kuwahara started his research in fluid dynamics under Professor Imai at the University of Tokyo. His first paper was published in 1969 with the title 'Steady Viscous Flow within Circular Boundary', with Professor Imai. In this paper, he combined theoretical and numerical methods in fluid dynamics. Since that time, he made significant and seminal contributions to computational fluid dynamics. He undertook pioneering numerical studies on the vortex method in 1970s. From then to the early nineties, he developed numerical analyses on a variety of three-dimensional unsteady phenomena of incompressible and compressible fluid flows and/or complex fluid flows using his own supercomputers with academic and industrial co-workers and members of his private research institute, ICFD in Tokyo. In addition, a number of senior and young researchers of fluid mechanics around the world were invited to ICFD and the Nobeyama workshops, which were held near his villa, and they intensively discussed new frontier problems of fluid physics and fluid engineering at Professor Kuwahara's kind hospitality. At the memorial Nobeyama workshop held in 2009, 24 overseas speakers presented their papers, including the talks of Dr J P Boris (Naval Research Laboratory), Dr E S Oran (Naval Research Laboratory), Professor Z J Wang (Iowa State University), Dr M Meinke (RWTH Aachen), Professor K Ghia (University of Cincinnati), Professor U Ghia (University of Cincinnati), Professor F Hussain (University of Houston), Professor M Farge (École Normale Superieure), Professor J Y Yong (National

Multislice computed tomography coronary angiography

NARCIS (Netherlands)

F. Cademartiri (Filippo)

2005-01-01

markdownabstract__Abstract__ Computed Tomography (CT) imaging is also known as "CAT scanning" (Computed Axial Tomography). Tomography is from the Greek word "tomos" meaning "slice" or "section" and "graphia" meaning "describing". CT was invented in 1972 by British engineer Godfrey Hounsfield

A computer program with graphical user interface to plot the multigroup cross sections of WIMS-D library

International Nuclear Information System (INIS)

Thiyagarajan, T.K.; Ganesan, S.; Jagannathan, V.; Karthikeyan, R.

2002-01-01

As a result of the IAEA Co-ordinated Research Programme entitled 'Final Stage of the WIMS Library Update Project', new and updated WIMS-D libraries based upon ENDF/B-VI.5, JENDL-3.2 and JEF-2.2 have become available. A project to prepare an exhaustive handbook of WIMS-D cross sections from old and new libraries has been taken up by the authors. As part of this project, we have developed a computer program XnWlup with user-friendly graphical interface to help the users of WIMS-D library to enable quick visualization of the plots of the energy dependence of the multigroup cross sections of any nuclide of interest. This software enables the user to generate and view the histogram of 69 multi-group cross sections as a function of neutron energy under Microsoft Windows environment. This software is designed using Microsoft Visual C++ and Microsoft Foundation Classes Library. The current features of the software, on-line help manual and future plans for further development are described in this paper

Modification in the CITATION computer code: change of microscopic cross sections by zone

International Nuclear Information System (INIS)

Yamaguchi, M.; Kosaka, N.

1983-01-01

Some modifications done in the CITATION computer code are presented, aiming to calculate the accumulated burnup for each reactor zone in each step of burnup and allow changing the microscopic cross sections for each zone in accordance to the burnup accumulated after each step of burnup. Some input data were put in the computer code. The alterations were tested and the results were compared with and without modifications. (E.G.) [pt

Review of multigroup nuclear cross-section processing

Energy Technology Data Exchange (ETDEWEB)

Trubey, D.K.; Hendrickson, H.R. (comps.)

1978-10-01

These proceedings consist of 18 papers given at a seminar--workshop on ''Multigroup Nuclear Cross-Section Processing'' held at Oak Ridge, Tennessee, March 14--16, 1978. The papers describe various computer code systems and computing algorithms for producing multigroup neutron and gamma-ray cross sections from evaluated data, and experience with several reference data libraries. Separate abstracts were prepared for 13 of the papers. The remaining five have already been cited in ERA, and may be located by referring to the entry CONF-780334-- in the Report Number Index. (RWR)

COMPUTATION FORMAT computer codes X4TOC4 and PLOTC4. Implementing and Testing on a Personal Computer

International Nuclear Information System (INIS)

McLaughlin, P.K.

1987-05-01

This document describes the contents of the diskette containing the COMPUTATION FORMAT codes X4TOC4 and PLOTC4 by D.E. Cullen, and example data for use in implementing and testing these codes on a Personal Computer of the type IBM-PC/AT. Upon request the codes are available from the IAEA Nuclear Data Section, free of charge, on a single diskette. (author)

PLANNING VESSEL BODY SECTION PRODUCTION

Directory of Open Access Journals (Sweden)

A. G. Grivachevsky

2015-01-01

Full Text Available A problem of planning production of a vessel body section is considered. The problem is reduced to the classic Johnson’s tree-machine flow-shop scheduling problem. A genetic algorithm and computer experiment to compare efficiency of this algorithm and the algorithm of full enumeration are described.

Parameterized representation of macroscopic cross section for PWR reactor

International Nuclear Information System (INIS)

Fiel, João Cláudio Batista; Carvalho da Silva, Fernando; Senra Martinez, Aquilino; Leal, Luiz C.

2015-01-01

Highlights: • This work describes a parameterized representation of the homogenized macroscopic cross section for PWR reactor. • Parameterization enables a quick determination of problem-dependent cross-sections to be used in few group calculations. • This work allows generating group cross-section data to perform PWR core calculations without computer code calculations. - Abstract: The purpose of this work is to describe, by means of Chebyshev polynomials, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and 235 92 U enrichment. The cross-section data analyzed are fission, scattering, total, transport, absorption and capture. The parameterization enables a quick and easy determination of problem-dependent cross-sections to be used in few group calculations. The methodology presented in this paper will allow generation of group cross-section data from stored polynomials to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by the proposed methodology when compared with results from the SCALE code calculations show very good agreement

A subtraction scheme for computing QCD jet cross sections at NNLO: integrating the doubly unresolved subtraction terms

CERN Document Server

Somogyi, Gabor

2013-01-01

We finish the definition of a subtraction scheme for computing NNLO corrections to QCD jet cross sections. In particular, we perform the integration of the soft-type contributions to the doubly unresolved counterterms via the method of Mellin-Barnes representations. With these final ingredients in place, the definition of the scheme is complete and the computation of the regularised doubly virtual contribution to the NNLO cross section becomes feasible.

Teachers of Advertising Media Courses Describe Techniques, Show Computer Applications.

Science.gov (United States)

Lancaster, Kent M.; Martin, Thomas C.

1989-01-01

Reports on a survey of university advertising media teachers regarding textbooks and instructional aids used, teaching techniques, computer applications, student placement, instructor background, and faculty publishing. (SR)

The IAEA co-ordinated research programme on improvement of measurements, theoretical computations and evaluations of neutron induced helium production cross sections. Status report. Prepared at the final CRP meeting in Sendai, Japan 25-29 September 1995

International Nuclear Information System (INIS)

Pashchenko, A.B.

1996-12-01

The present report describes the results of the IAEA Co-ordinated Research Programme (CRP) on ''Improvements of Measurements, Theoretical Computation and Evaluations of Neutron Induced Helium Production Cross Sections''. Summarized is the progress achieved under the CRP in the following areas: measurements of α-production cross sections for structural materials, theoretical computations at (nα) cross sections; measurements of activation cross sections; and improvement of experimental methods for (n,α) investigations. The status report gives also short summaries on the work of each laboratory which contributed to the results of the CRP. Attached is the list of program members and participants of CRP meetings. (author). Refs, 2 figs, 1 tab

Discrete ordinates cross-section generation in parallel plane geometry -- 2: Computational results

International Nuclear Information System (INIS)

Yavuz, M.

1998-01-01

In Ref. 1, the author presented inverse discrete ordinates (S N ) methods for cross-section generation with an arbitrary scattering anisotropy of order L (L ≤ N - 1) in parallel plane geometry. The solution techniques depend on the S N eigensolutions. The eigensolutions are determined by the inverse simplified S N method (ISS N ), which uses the surface Green's function matrices (T and R). Inverse problems are generally designed so that experimentally measured physical quantities can be used in the formulations. In the formulations, although T and R (TR matrices) are measurable quantities, the author does not have such data to check the adequacy and accuracy of the methods. However, it is possible to compute TR matrices by S N methods. The author presents computational results and computationally observed properties

Computer Package for Graphite Total Cross-Section Calculations

International Nuclear Information System (INIS)

Adib, M.; Fathalla, M.

2008-01-01

An additive formula is given which allows calculating the contribution of the total neut.>neutron transmission through crystalline graphite. The formula takes into account the graphite form of poly or pyrolytic crystals and its parameters. Computer package Graphite has been designed in order to provide the required calculations in the neutron energy range from 0.1 MeV to 10 eV. The package includes three codes: PCG (Polycrystalline Graphite), PG (Pyrolytic Graphite) and HOPG (Highly Oriented Pyrolytic Graphite) for calculating neutron transmission through fine graphite powder (polycrystalline), neutron transmission and removal coefficient of PG crystal in terms of its mosaic spread for neutrons incident along its c-axis and the transmission of neutrons incident on HOPG crystal at different angles, respectively. For comparison of the experimental neutron transmission data with the calculated values, the program takes into consideration the effect of both wavelength and neutron beam divergence in either 2 constant wavelength spread mode (δλ=constant) or constant wavelength resolution mode (δλ/λ=constant). In order to check the validity for application of computer package Graphite in cross-section calculations, a comparison between calculated values with the available experimental data were carried out. An overall agreement is indicated with an accuracy sufficient for determine the neutron transmission characteristics

Computed tomography and sectional anatomy of the head cavities in donkey (Equus asinus).

Science.gov (United States)

El-Gendy, S A A; Alsafy, M A M; El Sharaby, A A

2014-06-01

The purpose of this study was to describe the computed tomographic (CT) anatomy of normal donkey head cavities to be used as a basis for interpretation of CT images of donkey. Six adult donkeys' heads of undetermined sex were used in this study. The donkey heads were divided into three regions-nasal, orbital, and cranial-to show the morphology of the following cavities: nasal cavity, paranasal sinuses, orbital cavity, oral cavity, pharyngeal cavity, especially the guttural pouch, cranial cavity and temporomandibular joint. The donkey head had six pairs of sinuses: three paranasal (the frontal, maxillary and sphenopalatine sinuses) and three nasal (dorsal, middle and ventral conchal) sinuses. The maxillary sinus was subdivided into rostral and caudal compartments by a thin incomplete bony septum that was identified and labeled according to cheek teeth landmarks. The topographic description and relationship between the nasal, oral, orbital, cranial, temporomandibular joint, pharyngeal cavities and paranasal sinuses were demonstrated. The articular disc, articular surface and joint capsule of the temporomandibular joint were indicated easily in our CT and cross sectional images.

Microdefects in an as-grown Czochralski silicon crystal studied by synchrotron radiation section topography with aid of computer simulation

International Nuclear Information System (INIS)

Iida, Satoshi; Aoki, Yoshirou; Okitsu, Kouhei; Sugita, Yoshimitsu; Kawata, Hiroshi; Abe, Takao

1998-01-01

Grown-in microdefects of a Czochralski (CZ) silicon crystal grown at a slow growth rate were studied by section topography using high energy synchrotron radiation. Images of the microdefects in the section topographs were analyzed quantitatively using computer simulation based on the Takagi-Taupin type dynamical diffraction theory of X-rays, and reproduced successfully by the simulation when the microdefects were assumed to be spherical strain centers. Sizes and positions of the microdefects were able to be determined by detailed comparison between the experiments and the computer simulations. The validity of the computer simulation in an analysis of the section topographs is discussed. (author)

Model checking biological systems described using ambient calculus

DEFF Research Database (Denmark)

Mardare, Radu Iulian; Priami, Corrado; Qualia, Paola

2005-01-01

Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005.......Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005....

ORLIB: a computer code that produces one-energy group, time- and spatially-averaged neutron cross sections

International Nuclear Information System (INIS)

Blink, J.A.; Dye, R.E.; Kimlinger, J.R.

1981-12-01

Calculation of neutron activation of proposed fusion reactors requires a library of neutron-activation cross sections. One such library is ACTL, which is being updated and expanded by Howerton. If the energy-dependent neutron flux is also known as a function of location and time, the buildup and decay of activation products can be calculated. In practice, hand calculation is impractical without energy-averaged cross sections because of the large number of energy groups. A widely used activation computer code, ORIGEN2, also requires energy-averaged cross sections. Accordingly, we wrote the ORLIB code to collapse the ACTL library, using the flux as a weighting function. The ORLIB code runs on the LLNL Cray computer network. We have also modified ORIGEN2 to accept the expanded activation libraries produced by ORLIB

A CUMULATIVE MIGRATION METHOD FOR COMPUTING RIGOROUS TRANSPORT CROSS SECTIONS AND DIFFUSION COEFFICIENTS FOR LWR LATTICES WITH MONTE CARLO

Energy Technology Data Exchange (ETDEWEB)

Zhaoyuan Liu; Kord Smith; Benoit Forget; Javier Ortensi

2016-05-01

A new method for computing homogenized assembly neutron transport cross sections and dif- fusion coefficients that is both rigorous and computationally efficient is proposed in this paper. In the limit of a homogeneous hydrogen slab, the new method is equivalent to the long-used, and only-recently-published CASMO transport method. The rigorous method is used to demonstrate the sources of inaccuracy in the commonly applied “out-scatter” transport correction. It is also demonstrated that the newly developed method is directly applicable to lattice calculations per- formed by Monte Carlo and is capable of computing rigorous homogenized transport cross sections for arbitrarily heterogeneous lattices. Comparisons of several common transport cross section ap- proximations are presented for a simple problem of infinite medium hydrogen. The new method has also been applied in computing 2-group diffusion data for an actual PWR lattice from BEAVRS benchmark.

HADES. A computer code for fast neutron cross section from the Optical Model; HADES. Un programa numerico para el calculo de seccciones eficaces neutronicas mediante el modelo optico

Energy Technology Data Exchange (ETDEWEB)

Guasp, J; Navarro, C

1973-07-01

A FORTRAN V computer code for UNIVAC 1108/6 using a local Optical Model with spin-orbit interaction is described. The code calculates fast neutron cross sections, angular distribution, and Legendre moments for heavy and intermediate spherical nuclei. It allows for the possibility of automatic variation of potential parameters for experimental data fitting. (Author) 55 refs.

Computer algebra as a research tool in physics

International Nuclear Information System (INIS)

Drouffe, J.M.

1985-04-01

The progress of computer algebra observed during these last years has had certainly an impact in physics. I want to precise the role of these new techniques in this application domain and to analyze their present limitations. In Section 1, I describe briefly the use of algebraic manipulation programs at the elementary level. The numerical and symbolic solutions of problems are compared in Section 2. Section 3 is devoted to a prospective about the use of computer algebra at the highest level, as an ''intelligent'' system. I recall in Section 4 what is required from a system to be used in physics

An algorithm to detect and communicate the differences in computational models describing biological systems.

Science.gov (United States)

Scharm, Martin; Wolkenhauer, Olaf; Waltemath, Dagmar

2016-02-15

Repositories support the reuse of models and ensure transparency about results in publications linked to those models. With thousands of models available in repositories, such as the BioModels database or the Physiome Model Repository, a framework to track the differences between models and their versions is essential to compare and combine models. Difference detection not only allows users to study the history of models but also helps in the detection of errors and inconsistencies. Existing repositories lack algorithms to track a model's development over time. Focusing on SBML and CellML, we present an algorithm to accurately detect and describe differences between coexisting versions of a model with respect to (i) the models' encoding, (ii) the structure of biological networks and (iii) mathematical expressions. This algorithm is implemented in a comprehensive and open source library called BiVeS. BiVeS helps to identify and characterize changes in computational models and thereby contributes to the documentation of a model's history. Our work facilitates the reuse and extension of existing models and supports collaborative modelling. Finally, it contributes to better reproducibility of modelling results and to the challenge of model provenance. The workflow described in this article is implemented in BiVeS. BiVeS is freely available as source code and binary from sems.uni-rostock.de. The web interface BudHat demonstrates the capabilities of BiVeS at budhat.sems.uni-rostock.de. © The Author 2015. Published by Oxford University Press.

A method for describing the doses delivered by transmission x-ray computed tomography

International Nuclear Information System (INIS)

Shope, T.B.; Gagne, R.M.; Johnson, G.C.

1981-01-01

A method for describing the absorbed dose delivered by x-ray transmission computed tomography (CT) is proposed which provides a means to characterize the dose resulting from CT procedures consisting of a series of adjacent scans. The dose descriptor chosen is the average dose at several locations in the imaged volume of the central scan of the series. It is shown that this average dose, as defined, for locations in the central scan of the series can be obtained from the integral of the dose profile perpendicular to the scan plane at these same locations for a single scan. This method for estimating the average dose from a CT procedure has been evaluated as a function of the number of scans in the multiple scan procedure and location in the dosimetry phantom using single scan dose profiles obtained from five different types of CT systems. For the higher dose regions in the phantoms, the multiple scan dose descriptor derived from the single scan dose profiles overestimates the multiple scan average dose by no more than 10%, provided the procedure consists of at least eight scans

Computed tomographic and cross-sectional anatomy of the normal pacu (Colossoma macroponum).

Science.gov (United States)

Carr, Alaina; Weber, E P Scott; Murphy, Chris J; Zwingenberger, Alison

2014-03-01

The purpose of this study was to compare and define the normal cross-sectional gross and computed tomographic (CT) anatomy for a species of boney fish to better gain insight into the use of advanced diagnostic imaging for future clinical cases. The pacu (Colossoma macropomum) was used because of its widespread presence in the aquarium trade, its relatively large body size, and its importance in the research and aquaculture settings. Transverse 0.6-mm CT images of three cadaver fish were obtained and compared to corresponding frozen cross sections of the fish. Relevant anatomic structures were identified and labeled at each level; the Hounsfield unit density of major organs was established. The images presented good anatomic detail and provide a reference for future research and clinical investigation.

Computation of temperature-dependent legendre moments of a double-differential elastic cross section

International Nuclear Information System (INIS)

Arbanas, G.; Dunn, M.E.; Larson, N.M.; Leal, L.C.; Williams, M.L.; Becker, B.; Dagan, R.

2011-01-01

A general expression for temperature-dependent Legendre moments of a double-differential elastic scattering cross section was derived by Ouisloumen and Sanchez [Nucl. Sci. Eng. 107, 189-200 (1991)]. Attempts to compute this expression are hindered by the three-fold nested integral, limiting their practical application to just the zeroth Legendre moment of an isotropic scattering. It is shown that the two innermost integrals could be evaluated analytically to all orders of Legendre moments, and for anisotropic scattering, by a recursive application of the integration by parts method. For this method to work, the anisotropic angular distribution in the center of mass is expressed as an expansion in Legendre polynomials. The first several Legendre moments of elastic scattering of neutrons on 238 U are computed at T=1000 K at incoming energy 6.5 eV for isotropic scattering in the center of mass frame. Legendre moments of the anisotropic angular distribution given via Blatt-Biedenharn coefficients are computed at 1 keV. The results are in agreement with those computed by the Monte Carlo method. (author)

PORPST: A statistical postprocessor for the PORMC computer code

International Nuclear Information System (INIS)

Eslinger, P.W.; Didier, B.T.

1991-06-01

This report describes the theory underlying the PORPST code and gives details for using the code. The PORPST code is designed to do statistical postprocessing on files written by the PORMC computer code. The data written by PORMC are summarized in terms of means, variances, standard deviations, or statistical distributions. In addition, the PORPST code provides for plotting of the results, either internal to the code or through use of the CONTOUR3 postprocessor. Section 2.0 discusses the mathematical basis of the code, and Section 3.0 discusses the code structure. Section 4.0 describes the free-format point command language. Section 5.0 describes in detail the commands to run the program. Section 6.0 provides an example program run, and Section 7.0 provides the references. 11 refs., 1 fig., 17 tabs

Musculoskeletal Problems Associated with University Students Computer Users: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Rakhadani PB

2017-07-01

Full Text Available While several studies have examined the prevalence and correlates of musculoskeletal problems among university students, scanty information exists in South African context. The objective of this study was to determine the prevalence, causes and consequences of musculoskeletal problems among University of Venda students’ computer users. This cross-sectional study involved 694 university students at the University of Venda. A self-designed questionnaire was used to collect information on the sociodemographic characteristics, problems associated with computer users, and causes of musculoskeletal problems associated with computer users. The majority (84.6% of the participants use computer for internet, wording processing (20.3%, and games (18.7%. The students reported neck pain when using computer (52.3%; shoulder (47.0%, finger (45.0%, lower back (43.1%, general body pain (42.9%, elbow (36.2%, wrist (33.7%, hip and foot (29.1% and knee (26.2%. Reported causes of musculoskeletal pains associated with computer usage were: sitting position, low chair, a lot of time spent on computer, uncomfortable laboratory chairs, and stressfulness. Eye problems (51.9%, muscle cramp (344.0%, headache (45.3%, blurred vision (38.0%, feeling of illness (39.9% and missed lectures (29.1% were consequences of musculoskeletal problems linked to computer use. The majority of students reported having mild pain (43.7%, moderate (24.2%, and severe (8.4% pains. Years of computer use were significantly associated with neck, shoulder and wrist pain. Using computer for internet was significantly associated with neck pain (OR=0.60; 95% CI 0.40-0.93; games: neck (OR=0.60; 95% CI 0.40-0.85 and hip/foot (OR=0.60; CI 95% 0.40-0.92, programming for elbow (OR= 1.78; CI 95% 1.10-2.94 and wrist (OR=2.25; CI 95% 1.36-3.73, while word processing was significantly associated with lower back (OR=1.45; CI 95% 1.03-2.04. Undergraduate study had a significant association with elbow pain (OR=2

Users' guide to the positron camera DDP516 computer system

International Nuclear Information System (INIS)

Bracher, B.H.

1979-08-01

This publication is a guide to the operation, use and software for a DDP516 computer system provided by the Data Handling Group primarily for the development of a Positron Camera. The various sections of the publication fall roughly into three parts. (1) Sections forming the Operators Guide cover the basic operation of the machine, system utilities and back-up procedures. Copies of these sections are kept in a 'Nyrex' folder with the computer. (2) Sections referring to the software written particularly for Positron Camera Data Collection describe the system in outline and lead to details of file formats and program source files. (3) The remainder of the guide, describes General-Purpose Software. Much of this has been written over some years by various members of the Data Handling Group, and is available for use in other applications besides the positron camera. (UK)

Computer-based assistive technology device for use by children with physical disabilities: a cross-sectional study.

Science.gov (United States)

Lidström, Helene; Almqvist, Lena; Hemmingsson, Helena

2012-07-01

To investigate the prevalence of children with physical disabilities who used a computer-based ATD, and to examine characteristics differences in children and youths who do or do not use computer-based ATDs, as well as, investigate differences that might influence the satisfaction of those two groups of children and youths when computers are being used for in-school and outside school activities. A cross-sectional survey about computer-based activities in and outside school (n = 287) and group comparisons. The prevalence of using computer-based ATDs was about 44 % (n = 127) of the children in this sample. These children were less satisfied with their computer use in education and outside school activities than the children who did not use an ATD. Improved coordination of the usage of computer-based ATDs in school and in the home, including service and support, could increase the opportunities for children with physical disabilities who use computer-based ATDs to perform the computer activities they want, need and are expected to do in school and outside school.

The normal anatomy of the pulmonary hili on computed tomography

International Nuclear Information System (INIS)

Stark, P.

1982-01-01

The diagnosis of abnormalities in the hili by computed tomography may be difficult. A thorough knowledge of normal cross-sectional anatomy is necessary. The hilar anatomy on cross sections is described in detail and illustrated by appropriate cuts. (orig.) [de

Bistatic radar cross section of a perfectly conducting rhombus-shaped flat plate

Science.gov (United States)

Fenn, Alan J.

1990-05-01

The bistatic radar cross section of a perfectly conducting flat plate that has a rhombus shape (equilateral parallelogram) is investigated. The Ohio State University electromagnetic surface patch code (ESP version 4) is used to compute the theoretical bistatic radar cross section of a 35- x 27-in rhombus plate at 1.3 GHz over the bistatic angles 15 deg to 142 deg. The ESP-4 computer code is a method of moments FORTRAN-77 program which can analyze general configurations of plates and wires. This code has been installed and modified at Lincoln Laboratory on a SUN 3 computer network. Details of the code modifications are described. Comparisons of the method of moments simulations and measurements of the rhombus plate are made. It is shown that the ESP-4 computer code provides a high degree of accuracy in the calculation of copolarized and cross-polarized bistatic radar cross section patterns.

Computational models for interpretation of wave function imaging in cross-sectional STM of quantum dots

NARCIS (Netherlands)

Maksym, P.A.; Roy, M.; Wijnheijmer, A.P.; Koenraad, P.M.

2008-01-01

Computational models are used to investigate the role of electron-electron interactions in cross-sectional STM of cleaved quantum dots. If correlation effects are weak, the tunnelling current reflects the nodal structure of the non-interacting dot states. If correlation is strong, peaks in the

Neutron cross-section library for SAND-2 and its service program

International Nuclear Information System (INIS)

Berzonis, M.A.; Bondars, Kh.Ya.; Lapenas, A.A.

1978-01-01

The logical structure of the neutron cross-section library used in the SAND-2 program complex is considered. The organization of the DSIG01 program creating and servicing the neutron cross section library is described. The DSIG 01 program is written on FORTRAN and permits to create the neutron cross section library on the ES computer magnetic discs operating under the control of the ES operating system and to perform certain manipulations therewith

Guest Editors' Introduction: Special Section on Computer Arithmetic

DEFF Research Database (Denmark)

Nannarelli, Alberto; Seidel, Peter-Michael; Tang, Ping Tak Peter

2014-01-01

and their subsequent testing and verification. Many practitioners of the field also focus on the art and science of using computer arithmetic to carry out scientific and engineering computations. Computer arithmetic is therefore an interdisciplinary field that draws upon mathematics, computer science and electrical......The articles in this special issue focus on current trends and developments in the field of computer arithmetic. This is a field that encompasses the definition and standardization of arithmetic system for computers. The field also deals with issues of hardware and software implementations...

On calculating phase shifts and performing fits to scattering cross sections or transport properties

International Nuclear Information System (INIS)

Hepburn, J.W.; Roy, R.J. Le

1978-01-01

Improved methods of calculating quantum mechanical phase shifts and for performing least-squares fits to scattering cross sections or transport properties, are described. Their use in a five-parameter fit to experimental differential cross sections reduces the computer time by a factor of 4-7. (Auth.)

POINT 2012: ENDF/B-VII.1 Final Temperature Dependent Cross Section Library

International Nuclear Information System (INIS)

Cullen, D.E.

2012-01-01

This report is one in the series of 'POINT' reports that over the years have presented temperature dependent cross sections for the then current version of ENDF/B [R1]. In each case I have used my personal computer at home and publicly available data and codes: (1) publicly available nuclear data (the current ENDF/B data, available on-line at the National Nuclear Data Center, Brookhaven National Laboratory, http://www.nndc.bnl.gov/) and, (2) publicly available computer codes (the current PREPRO codes, available on-line at the Nuclear Data Section, IAEA, Vienna, Austria, http://www-nds.iaea.or.at/ndspub/endf/prepro/) and, (3) My own personal computer located in my home. I have used these in combination to produce the temperature dependent cross sections used in applications and described in this report. I should mention that today anyone with a personal computer can produce these results: by its very nature I consider this data to be born in the public domain.

POINT 2012: ENDF/B-VII.1 Final Temperature Dependent Cross Section Library

Energy Technology Data Exchange (ETDEWEB)

Cullen, D E

2012-02-26

This report is one in the series of 'POINT' reports that over the years have presented temperature dependent cross sections for the then current version of ENDF/B [R1]. In each case I have used my personal computer at home and publicly available data and codes: (1) publicly available nuclear data (the current ENDF/B data, available on-line at the National Nuclear Data Center, Brookhaven National Laboratory, http://www.nndc.bnl.gov/) and, (2) publicly available computer codes (the current PREPRO codes, available on-line at the Nuclear Data Section, IAEA, Vienna, Austria, http://www-nds.iaea.or.at/ndspub/endf/prepro/) and, (3) My own personal computer located in my home. I have used these in combination to produce the temperature dependent cross sections used in applications and described in this report. I should mention that today anyone with a personal computer can produce these results: by its very nature I consider this data to be born in the public domain.

Computational methods for describing the laser-induced mechanical response of tissue

Energy Technology Data Exchange (ETDEWEB)

Trucano, T.; McGlaun, J.M.; Farnsworth, A.

1994-02-01

Detailed computational modeling of laser surgery requires treatment of the photoablation of human tissue by high intensity pulses of laser light and the subsequent thermomechanical response of the tissue. Three distinct physical regimes must be considered to accomplish this: (1) the immediate absorption of the laser pulse by the tissue and following tissue ablation, which is dependent upon tissue light absorption characteristics; (2) the near field thermal and mechanical response of the tissue to this laser pulse, and (3) the potential far field (and longer time) mechanical response of witness tissue. Both (2) and (3) are dependent upon accurate constitutive descriptions of the tissue. We will briefly review tissue absorptivity and mechanical behavior, with an emphasis on dynamic loads characteristic of the photoablation process. In this paper our focus will center on the requirements of numerical modeling and the uncertainties of mechanical tissue behavior under photoablation. We will also discuss potential contributions that computational simulations can make in the design of surgical protocols which utilize lasers, for example, in assessing the potential for collateral mechanical damage by laser pulses.

Radiographic test phantom for computed tomographic lung nodule analysis

International Nuclear Information System (INIS)

Zerhouni, E.A.

1987-01-01

This patent describes a method for evaluating a computed tomograph scan of a nodule in a lung of a human or non-human animal. The method comprises generating a computer tomograph of a transverse section of the animal containing lung and nodule tissue, and generating a second computer tomograph of a test phantom comprising a device which simulates the transverse section of the animal. The tissue simulating portions of the device are constructed of materials having radiographic densities substantially identical to those of the corresponding tissue in the simulated transverse section of the animal and have voids therein which simulate, in size and shape, the lung cavities in the transverse section and which contain a test reference nodule constructed of a material of predetermined radiographic density which simulates in size, shape and position within a lung cavity void of the test phantom the nodule in the transverse section of the animal and comparing the respective tomographs

An Introduction to Quantum Computing, Without the Physics

OpenAIRE

Nannicini, Giacomo

2017-01-01

This paper is a gentle but rigorous introduction to quantum computing intended for discrete mathematicians. Starting from a small set of assumptions on the behavior of quantum computing devices, we analyze their main characteristics, stressing the differences with classical computers, and finally describe two well-known algorithms (Simon's algorithm and Grover's algorithm) using the formalism developed in previous sections. This paper does not touch on the physics of the devices, and therefor...

Implementing of AMPX-II system for a univac computer neutron cross-section libraries

International Nuclear Information System (INIS)

Sancho, J.; Verdu, G.; Serradell, V.

1984-01-01

The AMPX-II system, developed at ORNL, is constituted by a modular set of computer programs, for generation and handling of several nuclear data libraries. The processing starts from ENDF/B library. Along this paper, we refer mainly to the modules related with neutron cross section libraries: master, working and weighted. These modules have been implemented recently for a UNIVAC 1100/60 computer in the Universidad Politecnica de Valencia (Spain). In order to run the programs in that machine it has been necessary to introduce a number of modifications into their programing structure. The main difficulties found in this work and the need of verification for the new versions are also pointed out. We also refer to the results obtained from the execution of a set of little sample problems. (author)

Computational analysis of water entry of a circular section at constant velocity based on Reynold's averaged Navier-Stokes method

Science.gov (United States)

Uddin, M. Maruf; Fuad, Muzaddid-E.-Zaman; Rahaman, Md. Mashiur; Islam, M. Rabiul

2017-12-01

With the rapid decrease in the cost of computational infrastructure with more efficient algorithm for solving non-linear problems, Reynold's averaged Navier-Stokes (RaNS) based Computational Fluid Dynamics (CFD) has been used widely now-a-days. As a preliminary evaluation tool, CFD is used to calculate the hydrodynamic loads on offshore installations, ships, and other structures in the ocean at initial design stages. Traditionally, wedges have been studied more than circular cylinders because cylinder section has zero deadrise angle at the instant of water impact, which increases with increase of submergence. In Present study, RaNS based commercial code ANSYS Fluent is used to simulate the water entry of a circular section at constant velocity. It is seen that present computational results were compared with experiment and other numerical method.

A boundary integral method for numerical computation of radar cross section of 3D targets using hybrid BEM/FEM with edge elements

Science.gov (United States)

Dodig, H.

2017-11-01

This contribution presents the boundary integral formulation for numerical computation of time-harmonic radar cross section for 3D targets. Method relies on hybrid edge element BEM/FEM to compute near field edge element coefficients that are associated with near electric and magnetic fields at the boundary of the computational domain. Special boundary integral formulation is presented that computes radar cross section directly from these edge element coefficients. Consequently, there is no need for near-to-far field transformation (NTFFT) which is common step in RCS computations. By the end of the paper it is demonstrated that the formulation yields accurate results for canonical models such as spheres, cubes, cones and pyramids. Method has demonstrated accuracy even in the case of dielectrically coated PEC sphere at interior resonance frequency which is common problem for computational electromagnetic codes.

A subtraction scheme for computing QCD jet cross sections at NNLO: integrating the doubly unresolved subtraction terms

Science.gov (United States)

Somogyi, Gábor

2013-04-01

We finish the definition of a subtraction scheme for computing NNLO corrections to QCD jet cross sections. In particular, we perform the integration of the soft-type contributions to the doubly unresolved counterterms via the method of Mellin-Barnes representations. With these final ingredients in place, the definition of the scheme is complete and the computation of fully differential rates for electron-positron annihilation into two and three jets at NNLO accuracy becomes feasible.

A subtraction scheme for computing QCD jet cross sections at NNLO: integrating the doubly unresolved subtraction terms

OpenAIRE

Somogyi, Gabor

2013-01-01

We finish the definition of a subtraction scheme for computing NNLO corrections to QCD jet cross sections. In particular, we perform the integration of the soft-type contributions to the doubly unresolved counterterms via the method of Mellin-Barnes representations. With these final ingredients in place, the definition of the scheme is complete and the computation of fully differential rates for electron-positron annihilation into two and three jets at NNLO accuracy becomes feasible.

A Comparison of Success and Failure Rates between Computer-Assisted and Traditional College Algebra Sections

Science.gov (United States)

Herron, Sherry; Gandy, Rex; Ye, Ningjun; Syed, Nasser

2012-01-01

A unique aspect of the implementation of a computer algebra system (CAS) at a comprehensive university in the U.S. allowed us to compare the student success and failure rates to the traditional method of teaching college algebra. Due to space limitations, the university offered sections of both CAS and traditional simultaneously and, upon…

A personal computer code for seismic evaluations of nuclear power plant facilities

International Nuclear Information System (INIS)

Xu, J.; Graves, H.

1990-01-01

A wide range of computer programs and modeling approaches are often used to justify the safety of nuclear power plants. It is often difficult to assess the validity and accuracy of the results submitted by various utilities without developing comparable computer solutions. Taken this into consideration, CARES is designed as an integrated computational system which can perform rapid evaluations of structural behavior and examine capability of nuclear power plant facilities, thus CARES may be used by the NRC to determine the validity and accuracy of analysis methodologies employed for structural safety evaluations of nuclear power plants. CARES has been designed to: operate on a PC, have user friendly input/output interface, and have quick turnaround. The CARES program is structured in a modular format. Each module performs a specific type of analysis. The basic modules of the system are associated with capabilities for static, seismic and nonlinear analyses. This paper describes the various features which have been implemented into the Seismic Module of CARES version 1.0. In Section 2 a description of the Seismic Module is provided. The methodologies and computational procedures thus far implemented into the Seismic Module are described in Section 3. Finally, a complete demonstration of the computational capability of CARES in a typical soil-structure interaction analysis is given in Section 4 and conclusions are presented in Section 5. 5 refs., 4 figs

Citham-2 computer code-User manual

International Nuclear Information System (INIS)

Batista, J.L.

1984-01-01

The procedures and the input data for the Citham-2 computer code are described. It is a subroutine that modifies the nuclide concentration taking in account its burn and prepares cross sections library in 2,3 or 4 energy groups, to the used for Citation program. (E.G.) [pt

A subtraction scheme for computing QCD jet cross sections at NNLO: regularization of doubly-real emissions

International Nuclear Information System (INIS)

Somogyi, Gabor; Trocsanyi, Zoltan; Del Duca, Vittorio

2007-01-01

We present a generalization of the dipole subtraction scheme for computing jet cross sections in electron-positron annihilation at next-to-next-to-leading order accuracy in perturbative QCD. In this first part we deal with the regularization of the doubly-real contribution to the NNLO correction

A subtraction scheme for computing QCD jet cross sections at NNLO: regularization of doubly-real emissions

Energy Technology Data Exchange (ETDEWEB)

Somogyi, Gabor [University of Debrecen and Institute of Nuclear Research of the Hungarian Academy of Sciences, H-4001 Debrecen, PO Box 51 (Hungary); Trocsanyi, Zoltan [University of Debrecen and Institute of Nuclear Research of the Hungarian Academy of Sciences, H-4001 Debrecen, PO Box 51 (Hungary); Del Duca, Vittorio [Istituto Nazionale di Fisica Nucleare, Sez. di Torino, via P. Giuria, 1 - 10125 Turin (Italy)

2007-01-15

We present a generalization of the dipole subtraction scheme for computing jet cross sections in electron-positron annihilation at next-to-next-to-leading order accuracy in perturbative QCD. In this first part we deal with the regularization of the doubly-real contribution to the NNLO correction.

A subtraction scheme for computing QCD jet cross sections at NNLO: regularization of real-virtual emission

Energy Technology Data Exchange (ETDEWEB)

Somogyi, Gabor; Trocsanyi, Zoltan [University of Debrecen and Institute of Nuclear Research of the Hungarian Academy of Sciences, H-4001 Debrecen, PO Box 51 (Hungary)

2007-01-15

We present a generalization of the dipole subtraction scheme for computing jet cross sections in electron-positron annihilation at next-to-next-to-leading order accuracy in perturbative QCD. In this second part we deal with the regularization of the real-virtual contribution to the NNLO correction.

Computer automation of ultrasonic testing. [inspection of ultrasonic welding

Science.gov (United States)

Yee, B. G. W.; Kerlin, E. E.; Gardner, A. H.; Dunmyer, D.; Wells, T. G.; Robinson, A. R.; Kunselman, J. S.; Walker, T. C.

1974-01-01

Report describes a prototype computer-automated ultrasonic system developed for the inspection of weldments. This system can be operated in three modes: manual, automatic, and computer-controlled. In the computer-controlled mode, the system will automatically acquire, process, analyze, store, and display ultrasonic inspection data in real-time. Flaw size (in cross-section), location (depth), and type (porosity-like or crack-like) can be automatically discerned and displayed. The results and pertinent parameters are recorded.

Nuclear fission and neutron-induced fission cross-sections

Energy Technology Data Exchange (ETDEWEB)

James, G.D.; Lynn, J.E.; Michaudon, A.; Rowlands, J.; de Saussure, G.

1981-01-01

A general presentation of current knowledge of the fission process is given with emphasis on the low energy fission of actinide nuclei and neutron induced fission. The need for and the required accuracy of fission cross section data in nuclear energy programs are discussed. A summary is given of the steps involved in fission cross section measurement and the range of available techniques. Methods of fission detection are described with emphasis on energy dependent changed and detector efficiency. Examples of cross section measurements are given and data reduction is discussed. The calculation of fission cross sections is discussed and relevant nuclear theory including the formation and decay of compound nuclei and energy level density is introduced. A description of a practical computation of fission cross sections is given.

3rd Computer Science On-line Conference

CERN Document Server

Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

2014-01-01

This book is based on the research papers presented in the 3rd Computer Science On-line Conference 2014 (CSOC 2014).   The conference is intended to provide an international forum for discussions on the latest high-quality research results in all areas related to Computer Science. The topics addressed are the theoretical aspects and applications of Artificial Intelligences, Computer Science, Informatics and Software Engineering.   The authors provide new approaches and methods to real-world problems, and in particular, exploratory research that describes novel approaches in their field. Particular emphasis is laid on modern trends in selected fields of interest. New algorithms or methods in a variety of fields are also presented.   This book is divided into three sections and covers topics including Artificial Intelligence, Computer Science and Software Engineering. Each section consists of new theoretical contributions and applications which can be used for the further development of knowledge of everybod...

Brain neuroimaging of domestic cats: correlation between computed tomography and cross-sectional anatomy

International Nuclear Information System (INIS)

Nepomuceno, A.C.; Zanatta, R.; Chung, D.G.; Costa, P.F.; Feliciano, M.A.R.; Avante, M.L.; Canola, J.C.; Lopes, L.S.

2016-01-01

Computed tomography of the brain is necessary as part of the diagnosis of lesions of the central nervous system. In this study we used six domestic cats, male or female, aged between one and five years, evaluated by Computed Tomography (CT) examination without clinical signs of central nervous system disorders. Two euthanized animals stating a condition unrelated to the nervous system were incorporated into this study. The proposal consisted in establishing detailed anatomical description of tomographic images of normal brain of cats, using as reference anatomical images of cross sections of the stained brain and cranial part, with thicknesses similar to the planes of the CT images. CT examinations were performed with and without intravenous iodinated contrast media for live animals. With one euthanized animal, the brain was removed and immediately preserved in 10% formalin for later achievement in cross-sectional thickness of approximately 4mm and staining technique of Barnard, and Robert Brown. The head of another animal was disarticulated in the Atlanto-occipital region and frozen at -20 deg C then sliced to a thickness of about 5mm. The description of visualized anatomical structures using tomography is useful as a guide and allows transcribing with relative accuracy the brain region affected by an injury, and thus correlating it with the clinical symptoms of the patient, providing additional information and consequent improvement to veterinarians during the course of surgical clinic in this species. (author)

Brain neuroimaging of domestic cats: correlation between computed tomography and cross-sectional anatomy

Energy Technology Data Exchange (ETDEWEB)

Nepomuceno, A.C. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Zanatta, R. [Universidade de Cuiaba, MT (Brazil); Chung, D.G.; Costa, P.F.; Feliciano, M.A.R.; Avante, M.L.; Canola, J.C., E-mail: marcusfeliciano@yahoo.com.br [Faculdade de Ciencias Agrarias e Veterinarias, Jaboticabal, SP (Brazil); Lopes, L.S. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil)

2016-09-15

Computed tomography of the brain is necessary as part of the diagnosis of lesions of the central nervous system. In this study we used six domestic cats, male or female, aged between one and five years, evaluated by Computed Tomography (CT) examination without clinical signs of central nervous system disorders. Two euthanized animals stating a condition unrelated to the nervous system were incorporated into this study. The proposal consisted in establishing detailed anatomical description of tomographic images of normal brain of cats, using as reference anatomical images of cross sections of the stained brain and cranial part, with thicknesses similar to the planes of the CT images. CT examinations were performed with and without intravenous iodinated contrast media for live animals. With one euthanized animal, the brain was removed and immediately preserved in 10% formalin for later achievement in cross-sectional thickness of approximately 4mm and staining technique of Barnard, and Robert Brown. The head of another animal was disarticulated in the Atlanto-occipital region and frozen at -20 deg C then sliced to a thickness of about 5mm. The description of visualized anatomical structures using tomography is useful as a guide and allows transcribing with relative accuracy the brain region affected by an injury, and thus correlating it with the clinical symptoms of the patient, providing additional information and consequent improvement to veterinarians during the course of surgical clinic in this species. (author)

A functional language for describing reversible logic

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal

2012-01-01

Reversible logic is a computational model where all gates are logically reversible and combined in circuits such that no values are lost or duplicated. This paper presents a novel functional language that is designed to describe only reversible logic circuits. The language includes high....... Reversibility of descriptions is guaranteed with a type system based on linear types. The language is applied to three examples of reversible computations (ALU, linear cosine transformation, and binary adder). The paper also outlines a design flow that ensures garbage- free translation to reversible logic...... circuits. The flow relies on a reversible combinator language as an intermediate language....

Experimental high energy physics and modern computer architectures

International Nuclear Information System (INIS)

Hoek, J.

1988-06-01

The paper examines how experimental High Energy Physics can use modern computer architectures efficiently. In this connection parallel and vector architectures are investigated, and the types available at the moment for general use are discussed. A separate section briefly describes some architectures that are either a combination of both, or exemplify other architectures. In an appendix some directions in which computing seems to be developing in the USA are mentioned. (author)

Interlobar fissures involvement by lung cancer. Evaluation with thin-section computed tomography images

International Nuclear Information System (INIS)

Kato, Yuji; Yamada, Kouzo; Nomura, Ikuo; Noda, Kazumasa; Ishiwa, Naoki; Maehara, Takamitsu; Kameda, Youichi

1998-01-01

Pleural involvement of interlobar fissure by a tumor is one of the most important factors in the clinical diagnosis of lung cancer. A positive finding of incomplete interlobar fissure of the lung influences not only the surgical procedure but also the prognosis. The aim of this retrospective study was to investigate the usefulness of thin-section computed tomography (CT) compared with conventional CT in the detection of pleural invasion of the interlobar fissure by lung cancer or incomplete interlobar fissure, and the results of surgery, according to the involvement of the pleural surface. We reviewed 90 patients whose tumors were adjacent to the interlobar fissure of the lung through conventional CT scans and subsequent thoracotomy. A comparison of diagnoses based on the findings of thin-section CT and pathologic examination showed that thin-section CT was 94% accurate for pleural invasion of the interlobar fissure, and 100% for incomplete interlobar fissure. Conventional CT, however, was only 63% accurate for pleural invasion of the interlobar fissure and 31% for incomplete interlobar fissure. This leads us to conclude that thin-section CT is helpful in the accurate evaluation of pleural invasion of the interlobar fissure and in the findings of incomplete interlobar fissure in lung cancer for patients in whom tumors are adjacent to the interlobar fissure on conventional CT findings. (author)

URR [Unresolved Resonance Region] computer code: A code to calculate resonance neutron cross-section probability tables, Bondarenko self-shielding factors, and self-indication ratios for fissile and fertile nuclides

International Nuclear Information System (INIS)

Leal, L.C.; de Saussure, G.; Perez, R.B.

1990-01-01

The URR computer code has been developed to calculate cross-section probability tables, Bondarenko self-shielding factors, and self-indication ratios for fertile and fissile isotopes in the unresolved resonance region. Monte Carlo methods are utilized to select appropriate resonance parameters and to compute the cross sections at the desired reference energy. The neutron cross sections are calculated by the single-level Breit-Wigner formalism with s-, p-, and d-wave contributions. The cross-section probability tables are constructed by sampling by Doppler broadened cross-sections. The various self-shielding factors are computer numerically as Lebesgue integrals over the cross-section probability tables

Assessing apical transportation in curved canals: comparison between cross-sections and micro-computed tomography

Directory of Open Access Journals (Sweden)

Laila Gonzales Freire

2012-06-01

Full Text Available The aim of this study was to compare two methods of assessing apical transportation in curved canals after rotary instrumentation, namely, cross-sections and micro-computed tomography (µCT. Thirty mandibular molars were divided into two groups and prepared according to the requirements of each method. In G1 (cross-sections, teeth were embedded in resin blocks and sectioned at 2.0, 3.5, and 5.0 mm from the anatomic apex. Pre- and postoperative sections were photographed and analyzed. In G2 (µCT, teeth were embedded in a rubber-base impression material and scanned before and after instrumentation. Mesiobuccal canals were instrumented with the Twisted File (TF system (SybronEndo, Orange, USA, and mesiolingual canals, with the EndoSequence (ES system (Brasseler, Savannah, USA. Images were reconstructed, and sections corresponding to distances 2.0, 3.5, and 5.0 mm from the anatomic apex were selected for comparison. Data were analyzed using Mann-Whitney's test at a 5% significance level. The TF and ES instruments produced little deviation from the root canal center, with no statistical difference between them (P > 0.05. The canal transportation results were significantly lower (0.056 mm in G2 than in G1 (0.089 mm (p = 0.0012. The µCT method was superior to the cross-section method, especially in view of its ability to preserve specimens and provide results that are more closely related to clinical situations.

A Computer Model for the Hydraulic Analysis of Open Channel Cross Sections

Directory of Open Access Journals (Sweden)

W. H. Shayya

1996-01-01

Full Text Available Irrigation and hydraulic engineers are often faced with the difficulty of tedious trial solutions of the Manning equation to determine the various geometric elements of open channels. This paper addresses the development of a computer model for the design of the most commonly used channel-sections. The developed model is intended as an educational tool. It may be applied to the hydraulic design of trapezoidal , rectangular, triangular, parabolic, round-concered rectangular, and circular cross sections. Two procedures were utilized for the solution of the encountered implicit equations; the Newton-Raphson and the Regula-Falsi methods.  In order to initiate the solution process , these methods require one and two initial guesses, respectively. Tge result revealed that the Regula-Flasi method required more iterations to coverage to the solution compared to the Newton-Raphson method, irrespective of the nearness of the initial guess to the actual solution. The average number of iterations for the Regula-Falsi method was approximately three times that of the Newton-Raphson method.

URR [Unresolved Resonance Region] computer code: A code to calculate resonance neutron cross-section probability tables, Bondarenko self-shielding factors, and self-indication ratios for fissile and fertile nuclides

International Nuclear Information System (INIS)

Leal, L.C.; de Saussure, G.; Perez, R.B.

1989-01-01

The URR computer code has been developed to calculate cross-section probability tables, Bondarenko self-shielding factors, and self- indication ratios for fertile and fissile isotopes in the unresolved resonance region. Monte Carlo methods are utilized to select appropriate resonance parameters and to compute the cross sections at the desired reference energy. The neutron cross sections are calculated by the single-level Breit-Wigner formalism with s-, p-, and d-wave contributions. The cross-section probability tables are constructed by sampling the Doppler broadened cross-section. The various shelf-shielded factors are computed numerically as Lebesgue integrals over the cross-section probability tables. 6 refs

Evaluation of benign pulmonary lesions less than 20 mm in diameter by thin-section computed tomography

International Nuclear Information System (INIS)

Shiotani, Seiji; Yamada, Kouzo; Oshita, Fumihiro

1997-01-01

To establish diagnostic criteria for small solitary pulmonary nodules, the findings of thin-section computed tomography (CT) were compared with pathological findings. We evaluated thin-section CT images and compared them with pathological findings in 23 specimens of resected benign lesions less than 20 mm in diameter located in the peripheral region. The thin-section CT images were reconstructed using 2 mm thick sections taken by TCT-900S, HELIX (Toshiba, Tokyo) and were examined with two different windows and level settings. In every case, the surgical specimens were sliced transversely to correlate with the CT findings. The thin-section CT images were classified into two types; solid and air-containing types. The former consisted of benign pulmonary tumors, granulomas and some focal fibrosis, while the latter all consisted of focal fibrosis. Both types were difficult to distinguish from peripheral lung cancer based only on margin analysis of the lesion, but analysis of how pulmonary vessels relate to the lesion can allow benign pulmonary lesions to be distinguished from peripheral lung cancer. (author)

Computed tomography by reconstruction. Brain CT scanning. I. Basic physics, equipment, normal aspects, artefacts

International Nuclear Information System (INIS)

Chiras, J.; Palmieri, P.; Saudinos, J.; Salamon, G.

1980-01-01

The authors describe the physical basis, apparatus, normal images, and artefacts of computed tomography by reconstruction. Radio-anatomical sections enable clear comprehension of the computed tomography images. Other methods using computer reconstruction are outlined: tomography by Compton effect, tomography by positrons, tomography by gamma emission, tomography by protons, tomography by nuclear magnetic resonance [fr

Comparability of Computer-based and Paper-based Versions of Writing Section of PET in Iranian EFL Context

Directory of Open Access Journals (Sweden)

Mohammad Mohammadi

2010-11-01

Full Text Available Computer technology has provided language testing experts with opportunity to develop computerized versions of traditional paper-based language tests. New generations of TOEFL and Cambridge IELTS, BULATS, KET, PET are good examples of computer-based language tests. Since this new method of testing introduces new factors into the realm of language assessment ( e.g. modes of test delivery, familiarity with computer, etc.,the question may be whether the two modes of computer- and paper-based tests comparably measure the same construct, and hence, the scores obtained from the two modes can be used interchangeably. Accordingly, the present study aimed to investigate the comparability of the paper- and computer-based versions of a writing test. The data for this study were collected from administering the writing section of a Cambridge Preliminary English Test (PET to eighty Iranian intermediate EFL learners through the two modes of computer- and paper-based testing. Besides, a computer familiarity questionnaire was used to divide participants into two groups with high and low computer familiarity. The results of the independent samples t-test revealed that there was no statistically significant difference between the learners' computer- and paper-based writing scores. The results of the paired samples t-test showed no statistically significant difference between high- and low-computer-familiar groups on computer-based writing. The researchers concluded that the two modes comparably measured the same construct.

Thin-section computed tomography findings in 104 immunocompetent patients with adenovirus pneumonia.

Science.gov (United States)

Park, Chan Kue; Kwon, Hoon; Park, Ji Young

2017-08-01

Background To date, there has been no computed tomography (CT) evaluation of adenovirus pneumonia in a large number of immunocompetent patients. Purpose To describe the thin-section CT findings of immunocompetent patients with adenovirus pneumonia. Material and Methods We prospectively enrolled 104 patients with adenovirus pneumonia from a military hospital. CT scans of each patient were retrospectively and independently assessed by two radiologists for the presence of abnormalities, laterality and zonal predominance of the parenchymal abnormalities, and dominant imaging patterns and their anatomic distributions. Results CT findings included consolidation (n = 92), ground-glass opacity (GGO; n = 82), septal thickening (n = 34), nodules (n = 46), bronchial wall thickening (n = 32), pleural effusion (n = 16), and lymphadenopathy (n = 3). Eighty-four patients (81%) exhibited unilateral parenchymal abnormalities and 57 (57%) exhibited lower lung zone abnormalities. The most frequently dominant CT pattern was consolidation with surrounding GGO (n = 50), with subpleural (70%) and peribronchovascular (94%) distributions. Consolidation-the second-most common pattern (n = 33)-also exhibited subpleural (79%) and peribronchovascular (97%) distributions. The dominant nodule pattern (n = 14) exhibited mixed (64%) and peribronchovascular (100%) distributions. A dominant GGO pattern was only observed in four patients; none had central distribution. Conclusion Although the manifestations of adenovirus pneumonia on CT are varied, we found the most frequent pattern was consolidation with or without surrounding GGO, with subpleural and peribronchovascular distributions. Parenchymal abnormalities were predominantly unilateral and located in the lower lung zone. If dominant consolidation findings are present in immunocompetent patients during the early stages, adenovirus pneumonia should be considered.

Radionuclide transverse section imager

International Nuclear Information System (INIS)

Stoddart, H.F.

1980-01-01

A radioisotope scanning apparatus for use in nuclear medicine is described in detail. The apparatus enables the quantification and spatial location of the radioactivity in a body section of a patient to be determined with high sensitivity. It consists of an array of highly focussed collimators arranged such that adjacent collimators move in the same circumferential but opposite radial directions. The explicit movements of the gantry are described in detail and may be controlled by a general purpose computer. The use of highly focussed collimators allows both a reasonable solid angle of acceptance and also high target to background images; additionally, dual radionuclide pharmaceutical studies can be performed simultaneously. It is claimed that the high sensitivity of the system permits the early diagnosis of pathological changes and the images obtained show accurately the location and shape of physiological abnormalities. (UK)

Squalene aspiration pneumonia : thin-section CT and histopathologic findings

International Nuclear Information System (INIS)

Lee, Jin Seong; Gong, Gyung Yub; Lim, Tae Hwan

1998-01-01

The purpose of this study was to describe the thin-section computed tomography (CT) findings and histopathologic findings of squalene aspiration pneumonia. Thin-section CT scans were obtained from nine patients with proven exogenous lipoid pneumonia resulting from aspiration of squalene (derived from shark liver oil). The condition was diagnosed by biopsy (n=3), bronchoalveolar lavage(n=4), or sputum cytology and clinical history (n=2) of squalene use was confirmed in all patients. Specimens of transbronchial lung biopsy were also reviewed and compared with thin-section CT findings. On the basis of these results, we concluded that squalene aspiration pneumonia can be reliably diagnosed by thin-section CT findings particularly when the appropriate history is known. (author). 19 refs., 3 figs

Use of personal computers in performing a linear modal analysis of a large finite-element model

International Nuclear Information System (INIS)

Wagenblast, G.R.

1991-01-01

This paper presents the use of personal computers in performing a dynamic frequency analysis of a large (2,801 degrees of freedom) finite-element model. Large model linear time history dynamic evaluations of safety related structures were previously restricted to mainframe computers using direct integration analysis methods. This restriction was a result of the limited memory and speed of personal computers. With the advances in memory capacity and speed of the personal computers, large finite-element problems now can be solved in the office in a timely and cost effective manner. Presented in three sections, this paper describes the procedure used to perform the dynamic frequency analysis of the large (2,801 degrees of freedom) finite-element model on a personal computer. Section 2.0 describes the structure and the finite-element model that was developed to represent the structure for use in the dynamic evaluation. Section 3.0 addresses the hardware and software used to perform the evaluation and the optimization of the hardware and software operating configuration to minimize the time required to perform the analysis. Section 4.0 explains the analysis techniques used to reduce the problem to a size compatible with the hardware and software memory capacity and configuration

Strategy Ranges: Describing Change in Prospective Elementary Teachers' Approaches to Mental Computation of Sums and Differences

Science.gov (United States)

Whitacre, Ian

2015-01-01

This study investigated the sets of mental computation strategies used by prospective elementary teachers to compute sums and differences of whole numbers. In the context of an intervention designed to improve the number sense of prospective elementary teachers, participants were interviewed pre/post, and their mental computation strategies were…

Simulation of multistatic and backscattering cross sections for airborne radar

Science.gov (United States)

Biggs, Albert W.

1986-07-01

In order to determine susceptibilities of airborne radar to electronic countermeasures and electronic counter-countermeasures simulations of multistatic and backscattering cross sections were developed as digital modules in the form of algorithms. Cross section algorithms are described for prolate (cigar shape) and oblate (disk shape) spheroids. Backscattering cross section algorithms are also described for different categories of terrain. Backscattering cross section computer programs were written for terrain categorized as vegetation, sea ice, glacial ice, geological (rocks, sand, hills, etc.), oceans, man-made structures, and water bodies. PROGRAM SIGTERRA is a file for backscattering cross section modules of terrain (TERRA) such as vegetation (AGCROP), oceans (OCEAN), Arctic sea ice (SEAICE), glacial snow (GLASNO), geological structures (GEOL), man-made structures (MAMMAD), or water bodies (WATER). AGCROP describes agricultural crops, trees or forests, prairies or grassland, and shrubs or bush cover. OCEAN has the SLAR or SAR looking downwind, upwind, and crosswind at the ocean surface. SEAICE looks at winter ice and old or polar ice. GLASNO is divided into a glacial ice and snow or snowfields. MANMAD includes buildings, houses, roads, railroad tracks, airfields and hangars, telephone and power lines, barges, trucks, trains, and automobiles. WATER has lakes, rivers, canals, and swamps. PROGRAM SIGAIR is a similar file for airborne targets such as prolate and oblate spheroids.

Neutron cross section libraries for analysis of fusion neutronics experiments

International Nuclear Information System (INIS)

Kosako, Kazuaki; Oyama, Yukio; Maekawa, Hiroshi; Nakamura, Tomoo

1988-03-01

We have prepared two computer code systems producing neutron cross section libraries to analyse fusion neutronics experiments. First system produces the neutron cross section library in ANISN format, i.e., the multi-group constants in group independent format. This library can be obtained by using the multi-group constant processing code system MACS-N and the ANISN format cross section compiling code CROKAS. Second system is for the continuous energy cross section library for the MCNP code. This library can be obtained by the nuclear data processing system NJOY which generates pointwise energy cross sections and the cross section compiling code MACROS for the MCNP library. In this report, we describe the production procedures for both types of the cross section libraries, and show six libraries with different conditions in ANISN format and a library for the MCNP code. (author)

Sociodemographic differences in dietary habits described by food frequency questions - results from Denmark

DEFF Research Database (Denmark)

Dynesen, Anja Weirsøe; Haraldsdóttir, J.; Holm, Karen Lotte

2003-01-01

OBJECTIVES: To investigate whether a modest number of food frequency questions are sufficient to describe sociodemographic differences in dietary habits, and to identify sociodemographic characteristics of subjects adhering to food-based dietary guidelines operationalised in a "healthy-diet index......". DESIGN: Cross-sectional population survey. SUBJECTS: A total of 480 men, 515 women, aged 15-90 y. Random sample of private telephone numbers drawn from regional telephone records, geographically stratified. Participation rate 62%. METHODS: Computer-assisted telephone interviews, including six food...... frequency questions, a question on type of fat spreads used on bread, questions on seven sociodemographic variables. RESULTS: The summary of the healthy-diet index showed that the subjects who adhered to food-based dietary guidelines (top quintile) compared to those who did not (bottom quintile) were most...

Connectivity to computers and the Internet among patients with schizophrenia spectrum disorders: a cross-sectional study.

Science.gov (United States)

Välimäki, Maritta; Kuosmanen, Lauri; Hätönen, Heli; Koivunen, Marita; Pitkänen, Anneli; Athanasopoulou, Christina; Anttila, Minna

2017-01-01

Information and communication technologies have been developed for a variety of health care applications and user groups in the field of health care. This study examined the connectivity to computers and the Internet among patients with schizophrenia spectrum disorders (SSDs). A cross-sectional survey design was used to study 311 adults with SSDs from the inpatient units of two psychiatric hospitals in Finland. The data collection lasted for 20 months and was done through patients' medical records and a self-reported, structured questionnaire. Data analysis included descriptive statistics. In total, 297 patients were included in this study (response rate =96%). More than half of them (n=156; 55%) had a computer and less than half of them (n=127; 44%) had the Internet at home. Of those who generally had access to computers and the Internet, more than one-fourth (n=85; 29%) used computers daily, and >30% (n=96; 33%) never accessed the Internet. In total, approximately one-fourth of them (n=134; 25%) learned to use computers, and less than one-third of them (n=143; 31%) were known to use the Internet by themselves. Older people (aged 45-65 years) and those with less years of education (primary school) tended not to use the computers and the Internet at all ( P computers and the Internet, and they mainly used the Internet to seek information. Social, occupational, and psychological functioning (which were evaluated with Global Assessment of Functioning) were not associated with access to and frequency of computer and the Internet use. The results support the use of computers and the Internet as part of clinical work in mental health care.

STEEP4 code for computation of specific thermonuclear reaction rates from pointwise cross sections

International Nuclear Information System (INIS)

Harris, D.R.; Dei, D.E.; Husseiny, A.A.; Sabri, Z.A.; Hale, G.M.

1976-05-01

A code module, STEEP4, is developed to calculate the fusion reaction rates in terms of the specific reactivity [sigma v] which is the product of cross section and relative velocity averaged over the actual ion distributions of the interacting particles in the plasma. The module is structured in a way suitable for incorporation in thermonuclear burn codes to provide rapid and yet relatively accurate on-line computation of [sigma v] as a function of plasma parameters. Ion distributions are modified to include slowing-down contributions which are characterized in terms of plasma parameters. Rapid and accurate algorithms are used for integrating [sigma v] from cross sections and spectra. The main program solves for [sigma v] by the method of steepest descent. However, options are provided to use Gauss-Hermite and dense trapezoidal quadrature integration techniques. Options are also provided for rapid calculation of screening effects on specific reaction rates. Although such effects are not significant in cases of plasmas of laboratory interest, the options are included to increase the range of applicability of the code. Gamow penetration form, log-log interpolation, and cubic interpolation routines are included to provide the interpolated values of cross sections

Computation: A New Open Access Journal of Computational Chemistry, Computational Biology and Computational Engineering

Directory of Open Access Journals (Sweden)

Karlheinz Schwarz

2013-09-01

Full Text Available Computation (ISSN 2079-3197; http://www.mdpi.com/journal/computation is an international scientific open access journal focusing on fundamental work in the field of computational science and engineering. Computational science has become essential in many research areas by contributing to solving complex problems in fundamental science all the way to engineering. The very broad range of application domains suggests structuring this journal into three sections, which are briefly characterized below. In each section a further focusing will be provided by occasionally organizing special issues on topics of high interests, collecting papers on fundamental work in the field. More applied papers should be submitted to their corresponding specialist journals. To help us achieve our goal with this journal, we have an excellent editorial board to advise us on the exciting current and future trends in computation from methodology to application. We very much look forward to hearing all about the research going on across the world. [...

Reich-Moore and Adler-Adler representations of the 235U cross sections in the resolved resonance region

International Nuclear Information System (INIS)

Saussure, G. de; Leal, L.C.; Perez, R.B.

1990-01-01

In the first part of this paper, a reevaluation of the low-energy neutron cross sections of 235 U is described. This reevaluation was motivated by the discrepancy between the measured and computed temperature coefficients of reactivity and is based on recent measurements of the fission cross section and of η in the thermal and subthermal neutron energy regions. In the second part of the paper, we discuss the conversion of the Reich-Moore resonance parameters, describing the neutron cross sections of 235 U in the resolved resonance region, into equivalent Adler-Adler resonance parameters and into equivalent momentum space multipole resonance parameters

Image reconstruction from projections and its application in emission computer tomography

International Nuclear Information System (INIS)

Kuba, Attila; Csernay, Laszlo

1989-01-01

Computer tomography is an imaging technique for producing cross sectional images by reconstruction from projections. Its two main branches are called transmission and emission computer tomography, TCT and ECT, resp. After an overview of the theory and practice of TCT and ECT, the first Hungarian ECT type MB 9300 SPECT consisting of a gamma camera and Ketronic Medax N computer is described, and its applications to radiological patient observations are discussed briefly. (R.P.) 28 refs.; 4 figs

Computation: A New Open Access Journal of Computational Chemistry, Computational Biology and Computational Engineering

OpenAIRE

Karlheinz Schwarz; Rainer Breitling; Christian Allen

2013-01-01

Computation (ISSN 2079-3197; http://www.mdpi.com/journal/computation) is an international scientific open access journal focusing on fundamental work in the field of computational science and engineering. Computational science has become essential in many research areas by contributing to solving complex problems in fundamental science all the way to engineering. The very broad range of application domains suggests structuring this journal into three sections, which are briefly characterized ...

Describing function theory as applied to thermal and neutronic problems

International Nuclear Information System (INIS)

Nassersharif, B.

1983-01-01

Describing functions have traditionally been used to obtain the solutions of systems of ordinary differential equations. In this work the describing function concept has been extended to include nonlinear, distributed parameter partial differential equations. A three-stage solution algorithm is presented which can be applied to any nonlinear partial differential equation. Two generalized integral transforms were developed as the T-transform for the time domain and the B-transform for the spatial domain. The thermal diffusion describing function (TDDF) is developed for conduction of heat in solids and a general iterative solution along with convergence criteria is presented. The proposed solution method is used to solve the problem of heat transfer in nuclear fuel rods with annular fuel pellets. As a special instance the solid cylindrical fuel pellet is examined. A computer program is written which uses the describing function concept for computing fuel pin temperatures in the radial direction during reactor transients. The second problem investigated was the neutron diffusion equation which is intrinsically different from the first case. Although, for most situations, it can be treated as a linear differential equation, the describing function method is still applicable. A describing function solution is derived for two possible cases: constant diffusion coefficient and variable diffusion coefficient. Two classes of describing functions are defined for each case which portray the leakage and absorption phenomena. For the specific case of a slab reactor criticality problem the comparison between analytical and describing function solutions revealed an excellent agreement

Computing discharge using the index velocity method

Science.gov (United States)

Levesque, Victor A.; Oberg, Kevin A.

2012-01-01

Application of the index velocity method for computing continuous records of discharge has become increasingly common, especially since the introduction of low-cost acoustic Doppler velocity meters (ADVMs) in 1997. Presently (2011), the index velocity method is being used to compute discharge records for approximately 470 gaging stations operated and maintained by the U.S. Geological Survey. The purpose of this report is to document and describe techniques for computing discharge records using the index velocity method. Computing discharge using the index velocity method differs from the traditional stage-discharge method by separating velocity and area into two ratings—the index velocity rating and the stage-area rating. The outputs from each of these ratings, mean channel velocity (V) and cross-sectional area (A), are then multiplied together to compute a discharge. For the index velocity method, V is a function of such parameters as streamwise velocity, stage, cross-stream velocity, and velocity head, and A is a function of stage and cross-section shape. The index velocity method can be used at locations where stage-discharge methods are used, but it is especially appropriate when more than one specific discharge can be measured for a specific stage. After the ADVM is selected, installed, and configured, the stage-area rating and the index velocity rating must be developed. A standard cross section is identified and surveyed in order to develop the stage-area rating. The standard cross section should be surveyed every year for the first 3 years of operation and thereafter at a lesser frequency, depending on the susceptibility of the cross section to change. Periodic measurements of discharge are used to calibrate and validate the index rating for the range of conditions experienced at the gaging station. Data from discharge measurements, ADVMs, and stage sensors are compiled for index-rating analysis. Index ratings are developed by means of regression

Comparison of energy expenditure in adolescents when playing new generation and sedentary computer games: cross sectional study.

Science.gov (United States)

Graves, Lee; Stratton, Gareth; Ridgers, N D; Cable, N T

2007-12-22

To compare the energy expenditure of adolescents when playing sedentary and new generation active computer games. Cross sectional comparison of four computer games. Research laboratories. Six boys and five girls aged 13-15 years. Procedure Participants were fitted with a monitoring device validated to predict energy expenditure. They played four computer games for 15 minutes each. One of the games was sedentary (XBOX 360) and the other three were active (Wii Sports). Predicted energy expenditure, compared using repeated measures analysis of variance. Mean (standard deviation) predicted energy expenditure when playing Wii Sports bowling (190.6 (22.2) kJ/kg/min), tennis (202.5 (31.5) kJ/kg/min), and boxing (198.1 (33.9) kJ/kg/min) was significantly greater than when playing sedentary games (125.5 (13.7) kJ/kg/min) (Pgames. Playing new generation active computer games uses significantly more energy than playing sedentary computer games but not as much energy as playing the sport itself. The energy used when playing active Wii Sports games was not of high enough intensity to contribute towards the recommended daily amount of exercise in children.

Computing the cross sections of nuclear reactions with nuclear clusters emission for proton energies between 30 MeV and 2.6 GeV

Energy Technology Data Exchange (ETDEWEB)

Korovin, Yu. A.; Maksimushkina, A. V., E-mail: AVMaksimushkina@mephi.ru; Frolova, T. A. [Obninsk Institute for Nuclear Power Engineering, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) (Russian Federation)

2016-12-15

The cross sections of nuclear reactions involving emission of clusters of light nuclei in proton collisions with a heavy-metal target are computed for incident-proton energies between 30 MeV and 2.6 GeV. The calculation relies on the ALICE/ASH and CASCADE/INPE computer codes. The parameters determining the pre-equilibrium cluster emission are varied in the computation.

Dual-energy X-ray analysis using synchrotron computed tomography at 35 and 60 keV for the estimation of photon interaction coefficients describing attenuation and energy absorption.

Science.gov (United States)

Midgley, Stewart; Schleich, Nanette

2015-05-01

A novel method for dual-energy X-ray analysis (DEXA) is tested using measurements of the X-ray linear attenuation coefficient μ. The key is a mathematical model that describes elemental cross sections using a polynomial in atomic number. The model is combined with the mixture rule to describe μ for materials, using the same polynomial coefficients. Materials are characterized by their electron density Ne and statistical moments Rk describing their distribution of elements, analogous to the concept of effective atomic number. In an experiment with materials of known density and composition, measurements of μ are written as a system of linear simultaneous equations, which is solved for the polynomial coefficients. DEXA itself involves computed tomography (CT) scans at two energies to provide a system of non-linear simultaneous equations that are solved for Ne and the fourth statistical moment R4. Results are presented for phantoms containing dilute salt solutions and for a biological specimen. The experiment identifies 1% systematic errors in the CT measurements, arising from third-harmonic radiation, and 20-30% noise, which is reduced to 3-5% by pre-processing with the median filter and careful choice of reconstruction parameters. DEXA accuracy is quantified for the phantom as the mean absolute differences for Ne and R4: 0.8% and 1.0% for soft tissue and 1.2% and 0.8% for bone-like samples, respectively. The DEXA results for the biological specimen are combined with model coefficients obtained from the tabulations to predict μ and the mass energy absorption coefficient at energies of 10 keV to 20 MeV.

Development of a cross-section based stream package for MODFLOW

Science.gov (United States)

Ou, G.; Chen, X.; Irmak, A.

2012-12-01

Accurate simulation of stream-aquifer interactions for wide rivers using the streamflow routing package in MODFLOW is very challenging. To better represent a wide river spanning over multiple model grid cells, a Cross-Section based streamflow Routing (CSR) package is developed and incorporated into MODFLOW to simulate the interaction between streams and aquifers. In the CSR package, a stream segment is represented as a four-point polygon instead of a polyline which is traditionally used in streamflow routing simulation. Each stream segment is composed of upstream and downstream cross-sections. A cross-section consists of a number of streambed points possessing coordinates, streambed thicknesses and streambed hydraulic conductivities to describe the streambed geometry and hydraulic properties. The left and right end points are used to determine the locations of the stream segments. According to the cross-section geometry and hydraulic properties, CSR calculates the new stream stage at the cross-section using the Brent's method to solve the Manning's Equation. A module is developed to automatically compute the area of the stream segment polygon on each intersected MODFLOW grid cell as the upstream and downstream stages change. The stream stage and streambed hydraulic properties of model grids are interpolated based on the streambed points. Streambed leakage is computed as a function of streambed conductance and difference between the groundwater level and stream stage. The Muskingum-Cunge flow routing scheme with variable parameters is used to simulate the streamflow as the groundwater (discharge or recharge) contributes as lateral flows. An example is used to illustrate the capabilities of the CSR package. The result shows that the CSR is applicable to describing the spatial and temporal variation in the interaction between streams and aquifers. The input data become simple due to that the internal program automatically interpolates the cross-section data to each

Fast fission phenomenon, deep inelastic reactions and compound nucleus formation described within a dynamical macroscopic model

International Nuclear Information System (INIS)

Gregoire, C.; Ngo, C.; Remaud, B.

1982-01-01

We present a dynamical model to describe dissipative heavy ion reactions. It treats explicitly the relative motion of the two ions, the mass asymmetry of the system and the projection of the isospin of each ion. The deformations, which are induced during the collision, are simulated with a time-dependent interaction potential. This is done by a time-dependent transition between a sudden interaction potential in the entrance channel and an adiabatic potential in the exit channel. The model allows us to compute the compound-nucleus cross section and multidifferential cross-sections for deep inelastic reactions. In addition, for some systems, and under certain conditions which are discussed in detail, a new dissipative heavy ion collision appears: fast-fission phenomenon which has intermediate properties between deep inelastic and compound nucleus reactions. The calculated properties concerning fast fission are compared with experimental results and reproduce some of those which could not be understood as belonging to deep inelastic or compound-nucleus reactions. (orig.)

Computer modeling describes gravity-related adaptation in cell cultures.

Science.gov (United States)

Alexandrov, Ludmil B; Alexandrova, Stoyana; Usheva, Anny

2009-12-16

Questions about the changes of biological systems in response to hostile environmental factors are important but not easy to answer. Often, the traditional description with differential equations is difficult due to the overwhelming complexity of the living systems. Another way to describe complex systems is by simulating them with phenomenological models such as the well-known evolutionary agent-based model (EABM). Here we developed an EABM to simulate cell colonies as a multi-agent system that adapts to hyper-gravity in starvation conditions. In the model, the cell's heritable characteristics are generated and transferred randomly to offspring cells. After a qualitative validation of the model at normal gravity, we simulate cellular growth in hyper-gravity conditions. The obtained data are consistent with previously confirmed theoretical and experimental findings for bacterial behavior in environmental changes, including the experimental data from the microgravity Atlantis and the Hypergravity 3000 experiments. Our results demonstrate that it is possible to utilize an EABM with realistic qualitative description to examine the effects of hypergravity and starvation on complex cellular entities.

Control of the extraction, transport and quality of coal in sections in actual time intervals

Energy Technology Data Exchange (ETDEWEB)

Prochazka, P; Sladek, J

1981-01-01

This paper describes the design of a system for the automatic, semiautomatic and manual control of the extraction, transport and quality of the coal in two sections of the Severo-Cheshsk brown coal basin using computers. The coal in these sections is transported along a joint transport main line which consists of three conveyor lines to two grinding works and from there to 3 thermoelectric power plants. Based on information about the coal quality in the mining sections of individual excavators, about their productivity and about the throughput of the conveyor lines, the computer determines in a quite short time the maximally possible throughput of the conveyor lines for ensuring the required coal quality. Programs are written in the ALGOL language. The information in the SM-3 computer from the excavators will be transmitted using a Tesla Radom wireless communications apparatus through a JPR-12 computer. A terminal will be mounted on each excavator which will report to the computer the number of ledges subject to mining, the type of coal in them, the distance of the excavator from the coal loading point and the size of required and actual productivity of the excavator.

NNLO QCD corrections for the differential Higgs boson production cross-section in gluon fusion

International Nuclear Information System (INIS)

Anastasiou, Charalampos

2006-01-01

I describe a recent computation of the NNLO QCD corrections for the fully differential cross-section for Higgs boson production in the gluon fusion channel. This result is an application of a new method for calculating perturbative corrections beyond the next-to-leading order

Aquelarre. A computer code for fast neutron cross sections from the statistical model; AQUELARRE. Un programa numerico para el calculo de secciones eficaces neutronicas mediante el modelo de nucleo compuesto

Energy Technology Data Exchange (ETDEWEB)

Guasp, J.

1974-07-01

A Fortran V computer code for Univac 1108/6 using the partial statistical (or compound nucleus) model is described. The code calculates fast neutron cross sections for the (n, n'), (n, p), (n, d) and (n, {alpha}) reactions and the angular distributions and Legendre moments for the (n, n) and (n, n') processes in heavy and intermediate spherical nuclei. A local Optical Model with spin-orbit interaction for each level is employed, allowing for the width fluctuation and Moldauer corrections, as well as the inclusion of discrete and continuous levels. (Author) 67 refs.

Aquelarre. A computer code for fast neutron cross sections from the statistical model; AQUELARRE. Un programa numerico para el calculo de secciones eficaces neutronicas mediante el modelo de nucleo compuesto

Energy Technology Data Exchange (ETDEWEB)

Guasp, J

1974-07-01

A Fortran V computer code for Univac 1108/6 using the partial statistical (or compound nucleus) model is described. The code calculates fast neutron cross sections for the (n, n'), (n, p), (n, d) and (n, {alpha}) reactions and the angular distributions and Legendre moments for the (n, n) and (n, n') processes in heavy and intermediate spherical nuclei. A local Optical Model with spin-orbit interaction for each level is employed, allowing for the width fluctuation and Moldauer corrections, as well as the inclusion of discrete and continuous levels. (Author) 67 refs.

Three-dimensional reconstruction of colorectal tumors from serial tissue sections by computer graphics: a preliminary study.

Science.gov (United States)

Kikuchi, S; Matsuzaki, H; Kondo, K; Ohtani, Y; Ihara, A; Hiki, Y; Kakita, A; Kuwao, S

2000-01-01

We present herein the three-dimensional reconstruction of colorectal tumors, with particular reference to growth pattern into each layer of the colorectal wall, and measurement of tumor volume and surface area. Conventional tissue section images of colorectal tumors were analyzed using a computer graphics analysis program. The two-dimensional extent of invasion by each tumor into each layer of intestinal wall were determined from the images of each section. Based on data from multiple sections, tumor and surrounding normal tissue layers were reconstructed three-dimensionally, and volume and surface area of the tumors were determined. Using this technique, three-dimensional morphology of tumor and tumor progression into colorectal wall could be determined. Volume and surface area of the colon tumor were 4871 mm3 and 1741 mm2, respectively. Volume and surface area of the rectal tumor were 1090 mm3 and 877 mm2, respectively. This technique may provide a new approach for pathological analysis of colorectal carcinoma.

Polynomial parameterized representation of macroscopic cross section for PWR reactor

International Nuclear Information System (INIS)

Fiel, Joao Claudio B.

2015-01-01

The purpose of this work is to describe, by means of Tchebychev polynomial, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and 235 U 92 enrichment. Analyzed cross sections are: fission, scattering, total, transport, absorption and capture. This parameterization enables a quick and easy determination of the problem-dependent cross-sections to be used in few groups calculations. The methodology presented here will enable to provide cross-sections values to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by parameterized cross-sections functions, when compared with the cross-section generated by SCALE code calculations, or when compared with K inf , generated by MCNPX code calculations, show a difference of less than 0.7 percent. (author)

The Computer Revolution.

Science.gov (United States)

Berkeley, Edmund C.

"The Computer Revolution", a part of the "Second Industrial Revolution", is examined with reference to the social consequences of computers. The subject is introduced in an opening section which discusses the revolution in the handling of information and the history, powers, uses, and working s of computers. A second section examines in detail the…

Computer calculation of neutron cross sections with Hauser-Feshbach code STAPRE incorporating the hybrid pre-compound emission model

International Nuclear Information System (INIS)

Ivascu, M.

1983-10-01

Computer codes incorporating advanced nuclear models (optical, statistical and pre-equilibrium decay nuclear reaction models) were used to calculate neutron cross sections needed for fusion reactor technology. The elastic and inelastic scattering (n,2n), (n,p), (n,n'p), (n,d) and (n,γ) cross sections for stable molybdenum isotopes Mosup(92,94,95,96,97,98,100) and incident neutron energy from about 100 keV or a threshold to 20 MeV were calculated using the consistent set of input parameters. The hydrogen production cross section which determined the radiation damage in structural materials of fusion reactors can be simply deduced from the presented results. The more elaborated microscopic models of nuclear level density are required for high accuracy calculations

Computational Models Describing Possible Mechanisms for Generation of Excessive Beta Oscillations in Parkinson's Disease.

Directory of Open Access Journals (Sweden)

Alex Pavlides

2015-12-01

Full Text Available In Parkinson's disease, an increase in beta oscillations within the basal ganglia nuclei has been shown to be associated with difficulty in movement initiation. An important role in the generation of these oscillations is thought to be played by the motor cortex and by a network composed of the subthalamic nucleus (STN and the external segment of globus pallidus (GPe. Several alternative models have been proposed to describe the mechanisms for generation of the Parkinsonian beta oscillations. However, a recent experimental study of Tachibana and colleagues yielded results which are challenging for all published computational models of beta generation. That study investigated how the presence of beta oscillations in a primate model of Parkinson's disease is affected by blocking different connections of the STN-GPe circuit. Due to a large number of experimental conditions, the study provides strong constraints that any mechanistic model of beta generation should satisfy. In this paper we present two models consistent with the data of Tachibana et al. The first model assumes that Parkinsonian beta oscillation are generated in the cortex and the STN-GPe circuits resonates at this frequency. The second model additionally assumes that the feedback from STN-GPe circuit to cortex is important for maintaining the oscillations in the network. Predictions are made about experimental evidence that is required to differentiate between the two models, both of which are able to reproduce firing rates, oscillation frequency and effects of lesions carried out by Tachibana and colleagues. Furthermore, an analysis of the models reveals how the amplitude and frequency of the generated oscillations depend on parameters.

Reich-Moore and Adler-Adler representations of the 235U cross sections in the resolved resonance region

International Nuclear Information System (INIS)

de Saussure, G.; Leal, L.C.; Perez, R.B.

1990-01-01

In the first part of this paper, a reevaluation of the low-energy neutron cross sections of 235 U is described. This reevaluation was motivated by the discrepancy between the measured and computed temperature coefficients of reactivity and is based on recent measurements of the fission cross section and of η in the thermal and subthermal neutron energy regions. In the second part of the paper, we discuss the conversion of the Reich-Moore resonance parameters, describing the neutron cross sections of 235 U in the resolved resonance region, into equivalent Adler-Adler resonance parameters and into equivalent momentum space multipole resonance parameters. 25 refs., 4 figs., 5 tabs

Kinetic isotope effects and how to describe them

Directory of Open Access Journals (Sweden)

Konstantin Karandashev

2017-11-01

Full Text Available We review several methods for computing kinetic isotope effects in chemical reactions including semiclassical and quantum instanton theory. These methods describe both the quantization of vibrational modes as well as tunneling and are applied to the ⋅H + H2 and ⋅H + CH4 reactions. The absolute rate constants computed with the semiclassical instanton method both using on-the-fly electronic structure calculations and fitted potential-energy surfaces are also compared directly with exact quantum dynamics results. The error inherent in the instanton approximation is found to be relatively small and similar in magnitude to that introduced by using fitted surfaces. The kinetic isotope effect computed by the quantum instanton is even more accurate, and although it is computationally more expensive, the efficiency can be improved by path-integral acceleration techniques. We also test a simple approach for designing potential-energy surfaces for the example of proton transfer in malonaldehyde. The tunneling splittings are computed, and although they are found to deviate from experimental results, the ratio of the splitting to that of an isotopically substituted form is in much better agreement. We discuss the strengths and limitations of the potential-energy surface and based on our findings suggest ways in which it can be improved.

Honeywell Modular Automation System Computer Software Documentation

International Nuclear Information System (INIS)

STUBBS, A.M.

2000-01-01

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System

Fluid history computation methods for reactor safeguards problems using MNODE computer program

International Nuclear Information System (INIS)

Huang, Y.S.; Savery, C.W.

1976-10-01

A method for predicting the pressure-temperature histories of air, water liquid, and vapor flowing in a zoned containment as a result of high energy pipe rupture is described. The computer code, MNODE, has been developed for 12 connected control volumes and 24 inertia flow paths. Predictions by the code are compared with the results of an analytical gas dynamic problem, semiscale blowdown experiments, full scale MARVIKEN test results, Battelle-Frankfurt model PWR containment test data. The MNODE solutions to NRC/AEC subcompartment benchmark problems are also compared with results predicted by other computer codes such as RELAP-3, FLASH-2, CONTEMPT-PS. The analytical consideration is consistent with Section 6.2.1.2 of the Standard Format (Rev. 2) issued by U.S. Nuclear Regulatory Commission in September 1975

Computational simulation of the natural circulation occurring in an experimental test section of a pool type research reactor

Energy Technology Data Exchange (ETDEWEB)

Nascimento, Francisco R.T. do; Lima Junior, Carlos A.S.; Oliveira, Andre F.S. de; Affonso, Renato R.W.; Faccini, Jose L.H.; Moreira, Maria L., E-mail: rogerio.tdn@gmail.com, E-mail: souzalima_ca@ien.gov.br, E-mail: oliveira.afelipe@gmail.com, E-mail: raoniwa@yahoo.com.br, E-mail: faccini@ien.gov.br, E-mail: malu@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2015-07-01

The present work presents a computational simulation of the natural circulation phenomenon developing in an experimental test section of a pool type research reactor. The test section has been designed using a reduced scale in height 1:4.7 in relation to a pool type 30 MW research reactor prototype. It comprises a cylindrical vessel, which is opened to atmosphere, and representing the reactor pool; a natural circulation pipe, a lower plenum, and a heater containing electrical resistors in rectangular plate format, which represents the fuel elements, with a chimney positioned on the top of the resistor assembly. In the computational simulation, it was used a commercial CFD software, without any turbulence model. Besides, in the presence of the natural circulation, a laminar flow has been assumed and the equations of the mass conservation, momentum and energy were solved by the finite element method. In addition, the results of the simulation are presented in terms of velocities and temperatures differences, respectively: at inlet and outlet of the heater and of the natural circulation pipe. (author)

Computational simulation of the natural circulation occurring in an experimental test section of a pool type research reactor

International Nuclear Information System (INIS)

Nascimento, Francisco R.T. do; Lima Junior, Carlos A.S.; Oliveira, Andre F.S. de; Affonso, Renato R.W.; Faccini, Jose L.H.; Moreira, Maria L.

2015-01-01

The present work presents a computational simulation of the natural circulation phenomenon developing in an experimental test section of a pool type research reactor. The test section has been designed using a reduced scale in height 1:4.7 in relation to a pool type 30 MW research reactor prototype. It comprises a cylindrical vessel, which is opened to atmosphere, and representing the reactor pool; a natural circulation pipe, a lower plenum, and a heater containing electrical resistors in rectangular plate format, which represents the fuel elements, with a chimney positioned on the top of the resistor assembly. In the computational simulation, it was used a commercial CFD software, without any turbulence model. Besides, in the presence of the natural circulation, a laminar flow has been assumed and the equations of the mass conservation, momentum and energy were solved by the finite element method. In addition, the results of the simulation are presented in terms of velocities and temperatures differences, respectively: at inlet and outlet of the heater and of the natural circulation pipe. (author)

Cross Sections for Inner-Shell Ionization by Electron Impact

Energy Technology Data Exchange (ETDEWEB)

Llovet, Xavier, E-mail: xavier@ccit.ub.edu [Centres Científics i Tecnològics, Universitat de Barcelona, Lluís Solé i Sabarís 1-3, 08028 Barcelona (Spain); Powell, Cedric J. [Materials Measurement Science Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8370 (United States); Salvat, Francesc [Facultat de Física (ECM and ICC), Universitat de Barcelona, Diagonal 645, 08028 Barcelona (Spain); Jablonski, Aleksander [Institute of Physical Chemistry, Polish Academy of Sciences, ul. Kasprzaka 44/52, 01-224 Warsaw (Poland)

2014-03-15

An analysis is presented of measured and calculated cross sections for inner-shell ionization by electron impact. We describe the essentials of classical and semiclassical models and of quantum approximations for computing ionization cross sections. The emphasis is on the recent formulation of the distorted-wave Born approximation by Bote and Salvat [Phys. Rev. A 77, 042701 (2008)] that has been used to generate an extensive database of cross sections for the ionization of the K shell and the L and M subshells of all elements from hydrogen to einsteinium (Z = 1 to Z = 99) by electrons and positrons with kinetic energies up to 1 GeV. We describe a systematic method for evaluating cross sections for emission of x rays and Auger electrons based on atomic transition probabilities from the Evaluated Atomic Data Library of Perkins et al. [Lawrence Livermore National Laboratory, UCRL-ID-50400, 1991]. We made an extensive comparison of measured K-shell, L-subshell, and M-subshell ionization cross sections and of Lα x-ray production cross sections with the corresponding calculated cross sections. We identified elements for which there were at least three (for K shells) or two (for L and M subshells) mutually consistent sets of cross-section measurements and for which the cross sections varied with energy as expected by theory. The overall average root-mean-square deviation between the measured and calculated cross sections was 10.9% and the overall average deviation was −2.5%. This degree of agreement between measured and calculated ionization and x-ray production cross sections was considered to be very satisfactory given the difficulties of these measurements.

Computational geometry for reactor applications

International Nuclear Information System (INIS)

Brown, F.B.; Bischoff, F.G.

1988-01-01

Monte Carlo codes for simulating particle transport involve three basic computational sections: a geometry package for locating particles and computing distances to regional boundaries, a physics package for analyzing interactions between particles and problem materials, and an editing package for determining event statistics and overall results. This paper describes the computational geometry methods in RACER, a vectorized Monte Carlo code used for reactor physics analysis, so that comparisons may be made with techniques used in other codes. The principal applications for RACER are eigenvalue calculations and power distributions associated with reactor core physics analysis. Successive batches of neutrons are run until convergence and acceptable confidence intervals are obtained, with typical problems involving >10 6 histories. As such, the development of computational geometry methods has emphasized two basic needs: a flexible but compact geometric representation that permits accurate modeling of reactor core details and efficient geometric computation to permit very large numbers of histories to be run. The current geometric capabilities meet these needs effectively, supporting a variety of very large and demanding applications

Differentiation of bacterial and non-bacterial community-acquired pneumonia by thin-section computed tomography

Energy Technology Data Exchange (ETDEWEB)

Ito, Isao [Department of Respiratory Medicine, Kurashiki Central Hospital, 1-1-1 Miwa, Kurashiki 710-8602 (Japan); Department of Respiratory Medicine, Kyoto University, 54 Shogoin-kawaharacho, Sakyo-ku, Kyoto 606-8507 (Japan)], E-mail: isaoito@kuhp.kyoto-u.ac.jp; Ishida, Tadashi [Department of Respiratory Medicine, Kurashiki Central Hospital, 1-1-1 Miwa, Kurashiki 710-8602 (Japan)], E-mail: ishidat@kchnet.or.jp; Togashi, Kaori [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, 54 Shogoin-kawaharacho, Sakyo-ku, Kyoto 606-8507 (Japan)], E-mail: ktogashi@kuhp.kyoto-u.ac.jp; Niimi, Akio [Department of Respiratory Medicine, Kyoto University, 54 Shogoin-kawaharacho, Sakyo-ku, Kyoto 606-8507 (Japan)], E-mail: niimi@kuhp.kyoto-u.ac.jp; Koyama, Hiroshi [General Internal Medicine, National Hospital Organization Kyoto Medical Center, 1-1 Fukakusa-Mukohatacho, Fushimi-ku, Kyoto 612-8555 (Japan)], E-mail: hkoyama-kyt@umin.ac.jp; Ishimori, Takayoshi [Department of Radiology, Kurashiki Central Hospital, 1-1-1 Miwa, Kurashiki 710-8602 (Japan)], E-mail: ti10794@kchnet.or.jp; Kobayashi, Hisataka [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, 54 Shogoin-kawaharacho, Sakyo-ku, Kyoto 606-8507 (Japan); Molecular Imaging Program, Center for Cancer Research, National Cancer Institute, National Institutes of Health, Building 10, Room 1B40, MSC1088, 10 Center Drive, Bethesda, MD 20892-1088 (United States)], E-mail: kobayash@mail.nih.gov; Mishima, Michiaki [Department of Respiratory Medicine, Kyoto University, 54 Shogoin-kawaharacho, Sakyo-ku, Kyoto 606-8507 (Japan)], E-mail: mishima@kuhp.kyoto-u.ac.jp

2009-12-15

Background and objective: The management of community-acquired pneumonia (CAP) depends, in part, on the identification of the causative agents. The objective of this study was to determine the potential of thin-section computed tomography (CT) in differentiating bacterial and non-bacterial pneumonia. Patients and methods: Thin-section CT studies were prospectively examined in hospitalized CAP patients within 2 days of admission, followed by retrospective assessment by two pulmonary radiologists. Thin-section CT findings on the pneumonias caused by each pathogen were examined, and two types of pneumonias were compared. Using multivariate logistic regression analyses, receiver operating characteristic (ROC) curves were produced. Results: Among 183 CAP episodes (181 patients, 125 men and 56 women, mean age {+-} S.D.: 61.1 {+-} 19.7) examined by thin-section CT, the etiologies of 125 were confirmed (94 bacterial pneumonia and 31 non-bacterial pneumonia). Centrilobular nodules were specific for non-bacterial pneumonia and airspace nodules were specific for bacterial pneumonia (specificities of 89% and 94%, respectively) when located in the outer lung areas. When centrilobular nodules were the principal finding, they were specific but lacked sensitivity for non-bacterial pneumonia (specificity 98% and sensitivity 23%). To distinguish the two types of pneumonias, centrilobular nodules, airspace nodules and lobular shadows were found to be important by multivariate analyses. ROC curve analysis discriminated bacterial pneumonia from non-bacterial pneumonia among patients without underlying lung diseases, yielding an optimal point with sensitivity and specificity of 86% and 79%, respectively, but was less effective when all patients were analyzed together (70% and 84%, respectively). Conclusion: Thin-section CT examination was applied for the differentiation of bacterial and non-bacterial pneumonias. Though showing some potential, this examination at the present time would

Differentiation of bacterial and non-bacterial community-acquired pneumonia by thin-section computed tomography

International Nuclear Information System (INIS)

Ito, Isao; Ishida, Tadashi; Togashi, Kaori; Niimi, Akio; Koyama, Hiroshi; Ishimori, Takayoshi; Kobayashi, Hisataka; Mishima, Michiaki

2009-01-01

Background and objective: The management of community-acquired pneumonia (CAP) depends, in part, on the identification of the causative agents. The objective of this study was to determine the potential of thin-section computed tomography (CT) in differentiating bacterial and non-bacterial pneumonia. Patients and methods: Thin-section CT studies were prospectively examined in hospitalized CAP patients within 2 days of admission, followed by retrospective assessment by two pulmonary radiologists. Thin-section CT findings on the pneumonias caused by each pathogen were examined, and two types of pneumonias were compared. Using multivariate logistic regression analyses, receiver operating characteristic (ROC) curves were produced. Results: Among 183 CAP episodes (181 patients, 125 men and 56 women, mean age ± S.D.: 61.1 ± 19.7) examined by thin-section CT, the etiologies of 125 were confirmed (94 bacterial pneumonia and 31 non-bacterial pneumonia). Centrilobular nodules were specific for non-bacterial pneumonia and airspace nodules were specific for bacterial pneumonia (specificities of 89% and 94%, respectively) when located in the outer lung areas. When centrilobular nodules were the principal finding, they were specific but lacked sensitivity for non-bacterial pneumonia (specificity 98% and sensitivity 23%). To distinguish the two types of pneumonias, centrilobular nodules, airspace nodules and lobular shadows were found to be important by multivariate analyses. ROC curve analysis discriminated bacterial pneumonia from non-bacterial pneumonia among patients without underlying lung diseases, yielding an optimal point with sensitivity and specificity of 86% and 79%, respectively, but was less effective when all patients were analyzed together (70% and 84%, respectively). Conclusion: Thin-section CT examination was applied for the differentiation of bacterial and non-bacterial pneumonias. Though showing some potential, this examination at the present time would not

Neutron cross sections for defect production by high-energy displacement cascades in copper

International Nuclear Information System (INIS)

Heinisch, H.L.; Mann, F.M.

1983-08-01

Defect production cross sections for copper have been devised, based on computer simulations of displacement cascades. One thousand cascades ranging in energy from 200 eV to 200 keV were generated with the MARLOWE computer code. The cascades were subjected to a semi-empirical cascade quenching procedure and to short-term annealing with the ALSOME computer code. Functions were fitted to the numbers of defects produced as a function of primary knock-on atom (PKA) damage energy for the following defect types: 1) the total number of point defects after quenching and after short-term annealing, 2) the numbers of free interstitials and free vacancies after shortterm annealing, and 3) the numbers and sizes of vacancy and interstitial clusters after shortterm annealing. In addition, a function describing the number of distinct damage regions (lobes) per cascade was fitted to results of a graphical analysis of the cascade configurations. The defect production functions have been folded into PKA spectra using the NJOY nuclear data processing code system with ENDF/B-V nuclear data to yield neutron cross sections for defect production in copper. The free vacancy cross section displays much less variation with neutron energy than the cross sections for damage energy or total point defects

Neutron cross sections for defect production by high energy displacement cascades in copper

International Nuclear Information System (INIS)

Heinisch, H.L.; Mann, F.M.

1984-01-01

Defect production cross sections for copper have been devised, based on computer simulations of displacement cascades. One thousand cascades ranging in energy from 200 eV to 200 keV were generated with the MARLOWE computer code. The cascades were subjected to a semi-empirical cascade quenching procedure and to short-term annealing with the ALSOME computer code. Functions were fitted to the numbers of defects produced as a function of primary knock-on atom (PKA) damage energy for the following defect types: 1) the total number of point defects after quenching and after short-term annealing, 2) the numbers of free interstitials and free vacancies after short-term annealing, and 3) the numbers and sizes of vacancy and interstitial clusters after short-term annealing. In addition, a function describing the number of distinct damage regions (lobes) per cascade was fitted to results of a graphical analysis of the cascade configurations. The defect production functions have been folded into PKA spectra using the NJOY nuclear data processing code system with ENDF/B-V nuclear data to yield neutron cross sections for defect production in copper. The free vacancy cross section displays much less variation with neutron energy than the cross sections for damage energy or total point defects. (orig.)

R-Matrix Evaluation of 16O neutron cross sections up to 6.3 MeV

International Nuclear Information System (INIS)

Sayer, R.O.; Leal, L.C.; Larson, N.M.; Spencer, R.R.; Wright, R.Q.

2000-01-01

In this paper the authors describe an evaluation of 16 O neutron cross sections in the resolved resonance region with the multilevel Reich-Moore R-matrix formalism. Resonance analyses were performed with the computer code SAMMY [LA98] which utilizes Bayes' method, a generalized least squares technique

Computers in Curricula Program for Networked College Level Writing Process Instruction: A First Year Report.

Science.gov (United States)

Balajthy, Ernest

The first section of this report lists a variety of advantages and disadvantages of educational applications of Local Area Networks (LANs), with descriptive and evaluative comments on how the Union County Computers in the Curricula Network Project (Cranford, New Jersey) dealt with each. The second section of the report describes the following…

Computer assisted radiology

International Nuclear Information System (INIS)

Lemke, H.U.; Rhodes, M.L.; Jaffee, C.C.; Felix, R.

1987-01-01

The organization of the book follows the plan of the meeting, with chapters representing the general meeting sessions and articles representing the meeting presentations. These are grouped by modality or kindred application, where relevant. Some sessions are not similarly divided and individual papers are positioned, presumably, in order of presentation. Each section labeled workshop addresses a specific topic. The first session is on digital image generation and contains sections on magnetic resonance imaging, nuclear medicine, computed tomography, ultrasound, digital radiography, and digital subtraction and angiography. The remaining sections are on application programming, picture archiving and communications systems, computer graphics, and computer vision

Comparison of energy expenditure in adolescents when playing new generation and sedentary computer games: cross sectional study

Science.gov (United States)

2007-01-01

Objective To compare the energy expenditure of adolescents when playing sedentary and new generation active computer games. Design Cross sectional comparison of four computer games. Setting Research laboratories. Participants Six boys and five girls aged 13-15 years. Procedure Participants were fitted with a monitoring device validated to predict energy expenditure. They played four computer games for 15 minutes each. One of the games was sedentary (XBOX 360) and the other three were active (Wii Sports). Main outcome measure Predicted energy expenditure, compared using repeated measures analysis of variance. Results Mean (standard deviation) predicted energy expenditure when playing Wii Sports bowling (190.6 (22.2) kJ/kg/min), tennis (202.5 (31.5) kJ/kg/min), and boxing (198.1 (33.9) kJ/kg/min) was significantly greater than when playing sedentary games (125.5 (13.7) kJ/kg/min) (P<0.001). Predicted energy expenditure was at least 65.1 (95% confidence interval 47.3 to 82.9) kJ/kg/min greater when playing active rather than sedentary games. Conclusions Playing new generation active computer games uses significantly more energy than playing sedentary computer games but not as much energy as playing the sport itself. The energy used when playing active Wii Sports games was not of high enough intensity to contribute towards the recommended daily amount of exercise in children. PMID:18156227

Input/output routines for a hybrid computer

International Nuclear Information System (INIS)

Izume, Akitada; Yodo, Terutaka; Sakama, Iwao; Sakamoto, Akira; Miyake, Osamu

1976-05-01

This report is concerned with data processing programs for a hybrid computer system. Especially pre-data processing of magnetic tapes which are recorded during the dynamic experiment by FACOM 270/25 data logging system in the 50 MW steam generator test facility is described in detail. The magnetic tape is a most effective recording medium for data logging, but recording formats of the magnetic tape are different between data logging systems. In our section, the final data analyses are performed by data in the disk of EAI-690 hybrid computer system, and to transfer all required information in magnetic tapes to the disk, the magnetic tape editing and data transit are necessary by sub-computer NEAC-3200 system. This report is written for users as a manual and reference hand book of pre-data processing between different type computers. (auth.)

Algorithm describing pressure distribution of non-contact TNT explosion

Directory of Open Access Journals (Sweden)

Radosław Kiciński

2014-12-01

Full Text Available [b]Abstract[/b]. The aim of this study is to develop a computational algorithm, describing the shock wave pressure distribution in the space induced by non-contact TNT explosion. The procedure describes pressure distribution on a damp surface of the hull. Simulations have been carried out using Abaqus/CAE. The study also shows the pressure waveform descriptions provided by various authors and presents them in charts. The formulated conclusions convince efficiency of the algorithm application.[b]Keywords:[/b] Underwater explosion, shock wave, CAE, TNT, Kobben class submarine

Porosity effects in the neutron total cross section of graphite

International Nuclear Information System (INIS)

Santisteban, J. R; Dawidowski, J; Petriw, S. N

2009-01-01

Graphite has been used in nuclear reactors since the birth of the nuclear industry due to its good performance as a neutron moderator material. Graphite is still an option as moderator for generation IV reactors due to its good mechanical and thermal properties at high operation temperatures. So, there has been renewed interest in a revision of the computer libraries used to describe the neutron cross section of graphite. For sub-thermal neutron energies, polycrystalline graphite shows a larger total cross section (between 4 and 8 barns) than predicted by existing theoretical models (0.2 barns). In order to investigate the origin of this discrepancy we measured the total cross section of graphite samples of three different origins, in the energy range from 0.001 eV to 10 eV. Different experimental arrangements and sample treatments were explored, to identify the effect of various experimental parameters on the total cross section measurement. The experiments showed that the increase in total cross section is due to neutrons scattered around the forward direction. We associate these small-angle scattered neutrons (SANS) to the porous structure of graphite, and formulate a very simple model to compute its contribution to the total cross section of the material. This results in an analytic expression that explicitly depends on the density and mean size of the pores, which can be easily incorporated in nuclear library codes. [es

Analysis of thick brain sections by obverse-reverse computer microscopy: application of a new, high clarity Golgi-Nissl stain.

Science.gov (United States)

Glaser, E M; Van der Loos, H

1981-08-01

Exceptionally clear Golgi-Nissl sections of 300 micron thickness have been morphometrically studied by light microscopy using oil immersion objectives. The clarity results from a new variation of a staining procedure that combines Golgi and Nissl images in one section. A viewing technique has been developed that permits a histologic preparation to be examined from its obverse (or normally viewed) side and its reverse (or under) side. The technique was designed for use with a computer microscope but can be employed with any light microscope whose stage position can be measured within 100 micron. Sections thicker than 300 micron can be studied dependent on the working distance of the objective lens, provided that the clarity of the material permits it.

Benefit of computer-aided detection analysis for the detection of subsolid and solid lung nodules on thin- and thick-section CT.

Science.gov (United States)

Godoy, Myrna C B; Kim, Tae Jung; White, Charles S; Bogoni, Luca; de Groot, Patricia; Florin, Charles; Obuchowski, Nancy; Babb, James S; Salganicoff, Marcos; Naidich, David P; Anand, Vikram; Park, Sangmin; Vlahos, Ioannis; Ko, Jane P

2013-01-01

The objective of our study was to evaluate the impact of computer-aided detection (CAD) on the identification of subsolid and solid lung nodules on thin- and thick-section CT. For 46 chest CT examinations with ground-glass opacity (GGO) nodules, CAD marks computed using thin data were evaluated in two phases. First, four chest radiologists reviewed thin sections (reader(thin)) for nodules and subsequently CAD marks (reader(thin) + CAD(thin)). After 4 months, the same cases were reviewed on thick sections (reader(thick)) and subsequently with CAD marks (reader(thick) + CAD(thick)). Sensitivities were evaluated. Additionally, reader(thick) sensitivity with assessment of CAD marks on thin sections was estimated (reader(thick) + CAD(thin)). For 155 nodules (mean, 5.5 mm; range, 4.0-27.5 mm)-74 solid nodules, 22 part-solid (part-solid nodules), and 59 GGO nodules-CAD stand-alone sensitivity was 80%, 95%, and 71%, respectively, with three false-positives on average (0-12) per CT study. Reader(thin) + CAD(thin) sensitivities were higher than reader(thin) for solid nodules (82% vs 57%, p thick), reader(thick) + CAD(thick), reader(thick) + CAD(thin) were 40%, 58% (p thick); false-positive rates were 1.17, 1.19, and 1.26 per case for reader(thick), reader(thick) + CAD(thick), and reader(thick) + CAD(thin), respectively. Detection of GGO nodules and solid nodules is significantly improved with CAD. When interpretation is performed on thick sections, the benefit is greater when CAD marks are reviewed on thin rather than thick sections.

Individual and work-related risk factors for musculoskeletal pain: a cross-sectional study among Estonian computer users.

Science.gov (United States)

Oha, Kristel; Animägi, Liina; Pääsuke, Mati; Coggon, David; Merisalu, Eda

2014-05-28

Occupational use of computers has increased rapidly over recent decades, and has been linked with various musculoskeletal disorders, which are now the most commonly diagnosed occupational diseases in Estonia. The aim of this study was to assess the prevalence of musculoskeletal pain (MSP) by anatomical region during the past 12 months and to investigate its association with personal characteristics and work-related risk factors among Estonian office workers using computers. In a cross-sectional survey, the questionnaires were sent to the 415 computer users. Data were collected by self-administered questionnaire from 202 computer users at two universities in Estonia. The questionnaire asked about MSP at different anatomical sites, and potential individual and work related risk factors. Associations with risk factors were assessed by logistic regression. Most respondents (77%) reported MSP in at least one anatomical region during the past 12 months. Most prevalent was pain in the neck (51%), followed by low back pain (42%), wrist/hand pain (35%) and shoulder pain (30%). Older age, right-handedness, not currently smoking, emotional exhaustion, belief that musculoskeletal problems are commonly caused by work, and low job security were the statistically significant risk factors for MSP in different anatomical sites. A high prevalence of MSP in the neck, low back, wrist/arm and shoulder was observed among Estonian computer users. Psychosocial risk factors were broadly consistent with those reported from elsewhere. While computer users should be aware of ergonomic techniques that can make their work easier and more comfortable, presenting computer use as a serious health hazard may modify health beliefs in a way that is unhelpful.

EDITORIAL: Special section on gaze-independent brain-computer interfaces Special section on gaze-independent brain-computer interfaces

Science.gov (United States)

Treder, Matthias S.

2012-08-01

Restoring the ability to communicate and interact with the environment in patients with severe motor disabilities is a vision that has been the main catalyst of early brain-computer interface (BCI) research. The past decade has brought a diversification of the field. BCIs have been examined as a tool for motor rehabilitation and their benefit in non-medical applications such as mental-state monitoring for improved human-computer interaction and gaming has been confirmed. At the same time, the weaknesses of some approaches have been pointed out. One of these weaknesses is gaze-dependence, that is, the requirement that the user of a BCI system voluntarily directs his or her eye gaze towards a visual target in order to efficiently operate a BCI. This not only contradicts the main doctrine of BCI research, namely that BCIs should be independent of muscle activity, but it can also limit its real-world applicability both in clinical and non-medical settings. It is only in a scenario devoid of any motor activity that a BCI solution is without alternative. Gaze-dependencies have surfaced at two different points in the BCI loop. Firstly, a BCI that relies on visual stimulation may require users to fixate on the target location. Secondly, feedback is often presented visually, which implies that the user may have to move his or her eyes in order to perceive the feedback. This special section was borne out of a BCI workshop on gaze-independent BCIs held at the 2011 Society for Applied Neurosciences (SAN) Conference and has then been extended with additional contributions from other research groups. It compiles experimental and methodological work that aims toward gaze-independent communication and mental-state monitoring. Riccio et al review the current state-of-the-art in research on gaze-independent BCIs [1]. Van der Waal et al present a tactile speller that builds on the stimulation of the fingers of the right and left hand [2]. H¨ohne et al analyze the ergonomic aspects

The ENSDF radioactivity data base for IBM-PC and computer network access

International Nuclear Information System (INIS)

Ekstroem, P.; Spanier, L.

1989-08-01

A database for about 15000 gamma rays from 2777 radioactive nuclides derived from the international Evaluated Nuclear Structure Data File (ENSDF) is described together with supporting computer codes. The database is available on a PC diskette, costfree, from the IAEA Nuclear Data Section. (author)

Computer codes KASCO and KARDIF for processing cross-sections data; Computerprogramme zur Bearbeitung der Wirkungsquerschnitts-Dateien KASCO und KARDIF

Energy Technology Data Exchange (ETDEWEB)

Muenzel, H; Neumann, B; Klewe-Nebenius, H; Pfennig, G

1981-12-01

Document of internal interest, not to be sent out without permission of authors. Summary of the computer program developed at the Karlsruhe Charged Group (Kachapag) for producing from EXFOR the handbook series `Physik Daten/Physics Data Nr. 15` of the Fachinformationszentrum Karlsruhe. (author) 6 figs. The full text is available from IAEA Nuclear Data Section

Cross sections in 25 groups obtained from ENDF/B-IV and ENDL/78 libraries, processed with GALAXY and NJOY computer codes

International Nuclear Information System (INIS)

Chalhoub, E.S.; Corcuera, R.P.

1982-01-01

The discrepancies existing between ENDF/B-IV and ENDL/78 libraries, in diferent energy regions are identified, and the order of the differences in multigroup sections are determined, when GALAXY or NJOY computer codes are used. (E.G.) [pt

Two-dimensional color-code quantum computation

International Nuclear Information System (INIS)

Fowler, Austin G.

2011-01-01

We describe in detail how to perform universal fault-tolerant quantum computation on a two-dimensional color code, making use of only nearest neighbor interactions. Three defects (holes) in the code are used to represent logical qubits. Triple-defect logical qubits are deformed into isolated triangular sections of color code to enable transversal implementation of all single logical qubit Clifford group gates. Controlled-NOT (CNOT) is implemented between pairs of triple-defect logical qubits via braiding.

Towards a Quantum Computer?

Science.gov (United States)

Bellac, Michel Le

2014-11-01

In everyday life, practically all the information which is processed, exchanged or stored is coded in the form of discrete entities called bits, which take two values only, by convention 0 and 1. With the present technology for computers and optical fibers, bits are carried by electrical currents and electromagnetic waves corresponding to macroscopic fluxes of electrons and photons, and they are stored in memories of various kinds, for example, magnetic memories. Although quantum physics is the basic physics which underlies the operation of a transistor (Chapter 6) or of a laser (Chapter 4), each exchanged or processed bit corresponds to a large number of elementary quantum systems, and its behavior can be described classically due to the strong interaction with the environment (Chapter 9). For about thirty years, physicists have learned to manipulate with great accuracy individual quantum systems: photons, electrons, neutrons, atoms, and so forth, which opens the way to using two-state quantum systems, such as the polarization states of a photon (Chapter 2) or the two energy levels of an atom or an ion (Chapter 4) in order to process, exchange or store information. In § 2.3.2, we used the two polarization states of a photon, vertical (V) and horizontal (H), to represent the values 0 and 1 of a bit and to exchange information. In what follows, it will be convenient to use Dirac's notation (see Appendix A.2.2 for more details), where a vertical polarization state is denoted by |V> or |0> and a horizontal one by |H> or |1>, while a state with arbitrary polarization will be denoted by |ψ>. The polarization states of a photon give one possible realization of a quantum bit, or for short a qubit. Thanks to the properties of quantum physics, quantum computers using qubits, if they ever exist, would outperform classical computers for some specific, but very important, problems. In Sections 8.1 and 8.2, we describe some typical quantum algorithms and, in order to do so

Study of fission cross sections induced by nucleons and pions using the cascade-exciton model CEM95

International Nuclear Information System (INIS)

Yasin, Z.; Shahzad, M. I.

2007-01-01

Nucleon and pion-induced fission cross sections at intermediate and at higher energies are important in current nuclear applications, such as accelerator driven-systems (ADS), in medicine, for effects on electronics etc. In the present work, microscopic fission cross sections induced by nucleons and pions are calculated using the cascade-exciton model code CEM95 for different projectile-target combinations; at various energies and the computed cross sections are compared with the experimental data found in literature. A new approach is used to compute the fission cross sections in which a change of the ratio of the level density parameter in fission to neutron emission channels was taken into account with the change in the incident energy of the projectile. We are unable to describe well the fission cross sections without using this new approach. Proton induced fission cross sections are calculated for targets 1 97Au, 2 08Pb, 2 09Bi, 2 38U and 2 39Pu in the energy range from 20 MeV to 2000 MeV. Neutron induced fission cross sections are computed for 2 38U and 2 39Pu in the energy range from 20 MeV to 200 MeV. Negative pion induced cross sections for fission are calculated for targets 1 97Au and 2 08Pb from 50 MeV to 2500 MeV energy range. The calculated cross sections are essential to build a data library file for accelerator driven systems just like was built for conventional nuclear reactors. The computed values exhibited reasonable agreement with the experimental values found in the literature across a wide range of beam energies

Rotational character of the 12C spectrum investigated through inelastic cross sections via photon emission

Directory of Open Access Journals (Sweden)

Garrido E.

2016-01-01

Full Text Available In this work the bremsstrahlung and photon dissociation cross sections for transitions between 0+, 2+, and 4+ states in 12C are computed. The nucleus is described within the three-alpha model, and the wave functions are computed by means of the hyperspherical adiabatic expansion method. The continuum states are discretized by imposing a box boundary condition. The transition strengths are obtained from the cross sections, and compared to schematic rotational model predictions. The computed results strongly suggest that the two lowest bands are made, respectively, by the states with angular momentum and parity {01+, 21+, 42+} and {02+, 22+, 41+}. The transitions between the states in the first band are consistent with the rotational pattern corresponding to three alphas in an equilateral triangular structure. For the second band, the transitions are also consistent with a rotational pattern, but with the three alphas in an aligned distribution.

A cross-sectional evaluation of computer literacy among medical students at a tertiary care teaching hospital in Mumbai (Bombay

Directory of Open Access Journals (Sweden)

T S Panchabhai

2011-01-01

Full Text Available Background: Computer usage capabilities of medical students for introduction of computer-aided learning have not been adequately assessed. Aim: Cross-sectional study to evaluate computer literacy among medical students. Settings and Design: Tertiary care teaching hospital in Mumbai, India. Materials and Methods: Participants were administered a 52-question questionnaire, designed to study their background, computer resources, computer usage, activities enhancing computer skills, and attitudes toward computer-aided learning (CAL. The data was classified on the basis of sex, native place, and year of medical school, and the computer resources were compared. The computer usage and attitudes toward computer-based learning were assessed on a five-point Likert scale, to calculate Computer usage score (CUS - maximum 55, minimum 11 and Attitude score (AS - maximum 60, minimum 12. The quartile distribution among the groups with respect to the CUS and AS was compared by chi-squared tests. The correlation between CUS and AS was then tested. Results: Eight hundred and seventy-five students agreed to participate in the study and 832 completed the questionnaire. One hundred and twenty eight questionnaires were excluded and 704 were analyzed. Outstation students had significantly lesser computer resources as compared to local students (P<0.0001. The mean CUS for local students (27.0±9.2, Mean±SD was significantly higher than outstation students (23.2±9.05. No such difference was observed for the AS. The means of CUS and AS did not differ between males and females. The CUS and AS had positive, but weak correlations for all subgroups. Conclusion: The weak correlation between AS and CUS for all students could be explained by the lack of computer resources or inadequate training to use computers for learning. Providing additional resources would benefit the subset of outstation students with lesser computer resources. This weak correlation between the attitudes

Computer programming and computer systems

CERN Document Server

Hassitt, Anthony

1966-01-01

Computer Programming and Computer Systems imparts a "reading knowledge? of computer systems.This book describes the aspects of machine-language programming, monitor systems, computer hardware, and advanced programming that every thorough programmer should be acquainted with. This text discusses the automatic electronic digital computers, symbolic language, Reverse Polish Notation, and Fortran into assembly language. The routine for reading blocked tapes, dimension statements in subroutines, general-purpose input routine, and efficient use of memory are also elaborated.This publication is inten

Editorial for special section of grid computing journal on “Cloud Computing and Services Science‿

NARCIS (Netherlands)

van Sinderen, Marten J.; Ivanov, Ivan I.

This editorial briefly discusses characteristics, technology developments and challenges of cloud computing. It then introduces the papers included in the special issue on "Cloud Computing and Services Science" and positions the work reported in these papers with respect to the previously mentioned

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Science.gov (United States)

2010-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... GENERAL PROVISIONS § 201.26 Recordation of documents pertaining to computer shareware and donation of public domain computer software. (a) General. This section prescribes the procedures for submission of...

Computational methods for fluid dynamics

CERN Document Server

Ferziger, Joel H

2002-01-01

In its 3rd revised and extended edition the book offers an overview of the techniques used to solve problems in fluid mechanics on computers and describes in detail those most often used in practice. Included are advanced methods in computational fluid dynamics, like direct and large-eddy simulation of turbulence, multigrid methods, parallel computing, moving grids, structured, block-structured and unstructured boundary-fitted grids, free surface flows. The 3rd edition contains a new section dealing with grid quality and an extended description of discretization methods. The book shows common roots and basic principles for many different methods. The book also contains a great deal of practical advice for code developers and users, it is designed to be equally useful to beginners and experts. The issues of numerical accuracy, estimation and reduction of numerical errors are dealt with in detail, with many examples. A full-feature user-friendly demo-version of a commercial CFD software has been added, which ca...

Report on the FY17 Development of Computer Program for ASME Section III, Division 5, Subsection HB, Subpart B Rules

Energy Technology Data Exchange (ETDEWEB)

Swindeman, M. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Jetter, R. I. [Argonne National Lab. (ANL), Argonne, IL (United States); Sham, T. -L. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-01-01

One of the objectives of the high temperature design methodology activities is to develop and validate both improvements and the basic features of ASME Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, Subsection HB, Subpart B (HBB). The overall scope of this task is to develop a computer program to aid assessment procedures of components under specified loading conditions in accordance with the elevated temperature design requirements for Division 5 Class A components. There are many features and alternative paths of varying complexity in HBB. The initial focus of this computer program is a basic path through the various options for a single reference material, 316H stainless steel. However, the computer program is being structured for eventual incorporation all of the features and permitted materials of HBB. This report will first provide a description of the overall computer program, particular challenges in developing numerical procedures for the assessment, and an overall approach to computer program development. This is followed by a more comprehensive appendix, which is the draft computer program manual for the program development. The strain limits rules have been implemented in the computer program. The evaluation of creep-fatigue damage will be implemented in future work scope.

SAS3DC - A computer program to describe accidents in LMFBRs

International Nuclear Information System (INIS)

Angerer, G.; Arnecke, G.; Polch, A.

1981-02-01

The code system SAS3D - developed in the ANL - is at present the most adequate instrument for simulating accidents in the LMFBRs. SAS3DC is an improved version of this code system: the routine CLAZAS - modelling in SAS3D the motion of the fuel cladding - is replaced in the SAS3DC by the routine CMOT. CMOT describes the moving material not in the Lagrangian - as CLAZAS - but in the Eulerian system and is so able to register even small cladding-displacements. To complete the description of the SAS3DC-code the results of some sample problems are included. (orig.) [de

A describing function approach to bipolar RF-power amplifier simulation

DEFF Research Database (Denmark)

Vidkjær, Jens

1981-01-01

A method for fast and accurate computations of the primary performance parameters such as gain, efficiency, output power, and bandwidth in class-C biased RF-power amplifier stages is presented. The method is based on a describing function characterization of the RF-power transistor where the term...

Generation of L sub-shell photo-ionization cross-sections for elements 18Z92 at energies .320-115.606 keV (A computer program 'LSPICS')

International Nuclear Information System (INIS)

Sharma, Ajay; Mittal, Raj

2005-01-01

L sub-shell photo-ionization cross-sections, σ Li , for elements 18Z92 at energies .320-115.606 keV have been generated from an empirical relation fitted to Scofield's L sub-shell photo-ionization cross-section values. The excitation energy E for an element is constrained by the condition that only L and higher shell vacancies are produced in the elements. The closeness of generated and existing values of Scofield's L sub-shell data recommends the use of generated values in the fields of atomic and molecular physics and for trace elemental analysis. For this purpose computer software 'LSPICS' has been developed. On personal computer LSPICS generates L sub-shell photo-ionization cross-section values in barns just by entering the atomic number of element and excitation photon energy in keV

Traction calculation of band conveyors using the ''Nairi-2'' computer

Energy Technology Data Exchange (ETDEWEB)

Kutlunin, V A; Livshis, A V; Pod' yemshchikov, A N

1982-01-01

An algorithm is described and a program is introduced for traction calculation of band conveyors using the ''Nairi-2'' computer. The calculation system of the conveyor is derived by means of dividing the closed loop of the band into straight sections, which are separated by drums. The number of sections depends on the number of drums, the bypass system of them by the band, the shape of the conveyor route and in each specific case, a specific number is chosen. The initial information for the computer is assigned by a matrix, each row of which consists of parameters of the corresponding section. As a result, the forces of the beginning and end of the sections are found, and the required output of the drive motors with observance of the conditions of non-slippage of the drive drums and limiting of the maximum slack of the band between rollers are also found. The program allows one to make traction calculations of band conveyors with any routing shape for any number and position of the drive drums.

Shielding Benchmark Computational Analysis

International Nuclear Information System (INIS)

Hunter, H.T.; Slater, C.O.; Holland, L.B.; Tracz, G.; Marshall, W.J.; Parsons, J.L.

2000-01-01

Over the past several decades, nuclear science has relied on experimental research to verify and validate information about shielding nuclear radiation for a variety of applications. These benchmarks are compared with results from computer code models and are useful for the development of more accurate cross-section libraries, computer code development of radiation transport modeling, and building accurate tests for miniature shielding mockups of new nuclear facilities. When documenting measurements, one must describe many parts of the experimental results to allow a complete computational analysis. Both old and new benchmark experiments, by any definition, must provide a sound basis for modeling more complex geometries required for quality assurance and cost savings in nuclear project development. Benchmarks may involve one or many materials and thicknesses, types of sources, and measurement techniques. In this paper the benchmark experiments of varying complexity are chosen to study the transport properties of some popular materials and thicknesses. These were analyzed using three-dimensional (3-D) models and continuous energy libraries of MCNP4B2, a Monte Carlo code developed at Los Alamos National Laboratory, New Mexico. A shielding benchmark library provided the experimental data and allowed a wide range of choices for source, geometry, and measurement data. The experimental data had often been used in previous analyses by reputable groups such as the Cross Section Evaluation Working Group (CSEWG) and the Organization for Economic Cooperation and Development/Nuclear Energy Agency Nuclear Science Committee (OECD/NEANSC)

Resonance analysis and evaluation of the 235U neutron induced cross sections

International Nuclear Information System (INIS)

Leal, L.C.

1990-06-01

Neutron cross sections of fissile nuclei are of considerable interest for the understanding of parameters such as resonance absorption, resonance escape probability, resonance self-shielding,and the dependence of the reactivity on temperature. In the present study, new techniques for the evaluation of the 235 U neutron cross sections are described. The Reich-Moore formalism of the Bayesian computer code SAMMY was used to perform consistent R-matrix multilevel analyses of the selected neutron cross-section data. The Δ 3 -statistics of Dyson and Mehta, along with high-resolution data and the spin-separated fission cross-section data, have provided the possibility of developing a new methodology for the analysis and evaluation of neutron-nucleus cross sections. The results of the analysis consists of a set of resonance parameters which describe the 235 U neutron cross sections up to 500 eV. The set of resonance parameters obtained through a R-matrix analysis are expected to satisfy statistical properties which lead to information on the nuclear structure. The resonance parameters were tested and showed good agreement with the theory. It is expected that the parametrization of the 235 U neutron cross sections obtained in this dissertation represents the current state of art in data as well as in theory and, therefore, can be of direct use in reactor calculations. 44 refs., 21 figs., 8 tabs

Stereological measures of trabecular bone structure: comparison of 3D micro computed tomography with 2D histological sections in human proximal tibial bone biopsies

DEFF Research Database (Denmark)

Thomsen, Jesper Skovhus; Laib, A.; Koller, B.

2005-01-01

Stereology applied on histological sections is the 'gold standard' for obtaining quantitative information on cancellous bone structure. Recent advances in micro computed tomography (microCT) have made it possible to acquire three-dimensional (3D) data non-destructively. However, before the 3D...... methods can be used as a substitute for the current 'gold standard' they have to be verified against the existing standard. The aim of this study was to compare bone structural measures obtained from 3D microCT data sets with those obtained by stereology performed on conventional histological sections...... tibial metaphysis. The biopsies were embedded in methylmetacrylate before microCT scanning in a Scanco microCT 40 scanner at a resolution of 20 x 20 x 20 microm3, and the 3D data sets were analysed with a computer program. After microCT scanning, 16 sections were cut from the central 2 mm of each biopsy...

Right top pulmonary vein: Evaluation with 64 section multidetector computed tomography

International Nuclear Information System (INIS)

Arslan, Gokhan; Dincer, Elvan; Kabaalioglu, Adnan; Ozkaynak, Can

2008-01-01

Purpose: To evaluate the incidence and anatomic features of the rare variant of the pulmonary veins named 'right top pulmonary vein' as depicted with 64 section multidetector computed tomography (MDCT). Materials and methods: MDCT of 610 patients obtained over 12 months period for diagnosis of suspected thoracic or cardiac pathology were routinely reviewed in transverse and 3D images. The frequency of right top pulmonary vein (RTPV) was determined and anatomic features were also documented. Results: Right top pulmonary vein (RTPV) is a supernumerary vein arising from the roof of the right part of the left atrium separately from the orifice of the right superior pulmonary vein. It crosses behind the intermediate bronchus and drains mainly posterior segment of the right upper lobe but also receives few subsegmental branches of superior segment of the right lower lobe. It was detected in 2.2% of patients (14/610). The mean diameter of RTPV was 5.1 mm. Conclusion: The RTPV is a rare venous drainage variation of pulmonary veins. It is important to be aware of this anatomic pattern for avoiding misinterpretation of pulmonary venographic findings, inadvertent ablation of pulmonary vein and perioperative bleeding during video assisted thorocoscopic lobectomy

New Described Dermatological Disorders

Directory of Open Access Journals (Sweden)

Müzeyyen Gönül

2014-01-01

Full Text Available Many advances in dermatology have been made in recent years. In the present review article, newly described disorders from the last six years are presented in detail. We divided these reports into different sections, including syndromes, autoinflammatory diseases, tumors, and unclassified disease. Syndromes included are “circumferential skin creases Kunze type” and “unusual type of pachyonychia congenita or a new syndrome”; autoinflammatory diseases include “chronic atypical neutrophilic dermatosis with lipodystrophy and elevated temperature (CANDLE syndrome,” “pyoderma gangrenosum, acne, and hidradenitis suppurativa (PASH syndrome,” and “pyogenic arthritis, pyoderma gangrenosum, acne, and hidradenitis suppurativa (PAPASH syndrome”; tumors include “acquired reactive digital fibroma,” “onychocytic matricoma and onychocytic carcinoma,” “infundibulocystic nail bed squamous cell carcinoma,” and “acral histiocytic nodules”; unclassified disorders include “saurian papulosis,” “symmetrical acrokeratoderma,” “confetti-like macular atrophy,” and “skin spicules,” “erythema papulosa semicircularis recidivans.”

Application of sensitivity analysis to a quantitative assessment of neutron cross-section requirements for the TFTR: an interim report

International Nuclear Information System (INIS)

Gerstl, S.A.W.; Dudziak, D.J.; Muir, D.W.

1975-09-01

A computational method to determine cross-section requirements quantitatively is described and applied to the Tokamak Fusion Test Reactor (TFTR). In order to provide a rational basis for the priorities assigned to new cross-section measurements or evaluations, this method includes quantitative estimates of the uncertainty of currently available data, the sensitivity of important nuclear design parameters to selected cross sections, and the accuracy desired in predicting nuclear design parameters. Perturbation theory is used to combine estimated cross-section uncertainties with calculated sensitivities to determine the variance of any nuclear design parameter of interest

Slender body theory programmed for bodies with arbitrary cross section. [including fuselages

Science.gov (United States)

Werner, J.; Krenkel, A. R.

1978-01-01

A computer program developed for determining the subsonic pressure, force, and moment coefficients for a fuselage-type body using slender body theory is described. The program is suitable for determining the angle of attack and sideslipping characteristics of such bodies in the linear range where viscous effects are not predominant. Procedures developed which are capable of treating cross sections with corners or regions of large curvature are outlined.

Computer codes in particle transport physics

International Nuclear Information System (INIS)

Pesic, M.

2004-01-01

Simulation of transport and interaction of various particles in complex media and wide energy range (from 1 MeV up to 1 TeV) is very complicated problem that requires valid model of a real process in nature and appropriate solving tool - computer code and data library. A brief overview of computer codes based on Monte Carlo techniques for simulation of transport and interaction of hadrons and ions in wide energy range in three dimensional (3D) geometry is shown. Firstly, a short attention is paid to underline the approach to the solution of the problem - process in nature - by selection of the appropriate 3D model and corresponding tools - computer codes and cross sections data libraries. Process of data collection and evaluation from experimental measurements and theoretical approach to establishing reliable libraries of evaluated cross sections data is Ion g, difficult and not straightforward activity. For this reason, world reference data centers and specialized ones are acknowledged, together with the currently available, state of art evaluated nuclear data libraries, as the ENDF/B-VI, JEF, JENDL, CENDL, BROND, etc. Codes for experimental and theoretical data evaluations (e.g., SAMMY and GNASH) together with the codes for data processing (e.g., NJOY, PREPRO and GRUCON) are briefly described. Examples of data evaluation and data processing to generate computer usable data libraries are shown. Among numerous and various computer codes developed in transport physics of particles, the most general ones are described only: MCNPX, FLUKA and SHIELD. A short overview of basic application of these codes, physical models implemented with their limitations, energy ranges of particles and types of interactions, is given. General information about the codes covers also programming language, operation system, calculation speed and the code availability. An example of increasing computation speed of running MCNPX code using a MPI cluster compared to the code sequential option

Overweight and television and computer habits in Swedish school-age children and adolescents: a cross-sectional study.

Science.gov (United States)

Garmy, Pernilla; Clausson, Eva K; Nyberg, Per; Jakobsson, Ulf

2014-06-01

The aim of this cross-sectional study was to investigate the prevalence of overweight and obesity in children and adolescents (6-16 years), and relationships between being overweight and sleep, experiencing of fatigue, enjoyment of school, and time spent in watching television and in sitting at the computer. Trained school nurses measured the weight and height of 2891 children aged 6, 7, 10, 14, and 16, and distributed a questionnaire to them regarding television and computer habits, sleep, and enjoyment of school. Overweight, obesity included, was present in 16.1% of the study population. Relationships between lifestyle factors and overweight were studied using multivariate logistic regression analysis. Having a bedroom television and spending more than 2 h a day watching television were found to be associated with overweight (OR 1.26 and 1.55 respectively). No association was found between overweight and time spent at the computer, short sleep duration, enjoyment of school, tiredness at school, or difficulties in sleeping and waking up. It is recommended that the school health service discuss with pupils their media habits so as to promote their maintaining a healthy lifestyle. © 2013 Wiley Publishing Asia Pty Ltd.

Development of a one-group cross section data base of the ORIGEN2 computer code for research reactor applications

Energy Technology Data Exchange (ETDEWEB)

Kim, Jung Do; Gil, Choong Sub; Lee, Jong Tai [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Hwang, Won Guk [Kyung Hee University, Seoul (Korea, Republic of)

1992-03-01

A one-group cross section data base of the ORIGEN2 computer code was developed for research reactor applications. For this, ENDF/B-IV and -V data were processed using the NJOY code system into 69-group data. The burnup dependent weighting spectra for KMRR were calculated with the WIMS-KAERI computer code, and then the 69-group data were collapsed to one-group using the spectra. The ORlGEN2-predicted burnup-dependent actinide compositions of KMRR spent fuel using the newly developed data base show a good agreement with the results of detailed multigroup transport calculation. In addition, the burnup characteristics of KMRR spent fuel was analyzed with the new data base. (Author).

Development of a one-group cross section data base of the ORIGEN2 computer code for research reactor applications

International Nuclear Information System (INIS)

Kim, Jung Do; Gil, Choong Sub; Lee, Jong Tai; Hwang, Won Guk

1992-01-01

A one-group cross section data base of the ORIGEN2 computer code was developed for research reactor applications. For this, ENDF/B-IV and -V data were processed using the NJOY code system into 69-group data. The burnup dependent weighting spectra for KMRR were calculated with the WIMS-KAERI computer code, and then the 69-group data were collapsed to one-group using the spectra. The ORlGEN2-predicted burnup-dependent actinide compositions of KMRR spent fuel using the newly developed data base show a good agreement with the results of detailed multigroup transport calculation. In addition, the burnup characteristics of KMRR spent fuel was analyzed with the new data base. (Author)

Unconventional methods of imaging: computational microscopy and compact implementations

Science.gov (United States)

McLeod, Euan; Ozcan, Aydogan

2016-07-01

In the past two decades or so, there has been a renaissance of optical microscopy research and development. Much work has been done in an effort to improve the resolution and sensitivity of microscopes, while at the same time to introduce new imaging modalities, and make existing imaging systems more efficient and more accessible. In this review, we look at two particular aspects of this renaissance: computational imaging techniques and compact imaging platforms. In many cases, these aspects go hand-in-hand because the use of computational techniques can simplify the demands placed on optical hardware in obtaining a desired imaging performance. In the first main section, we cover lens-based computational imaging, in particular, light-field microscopy, structured illumination, synthetic aperture, Fourier ptychography, and compressive imaging. In the second main section, we review lensfree holographic on-chip imaging, including how images are reconstructed, phase recovery techniques, and integration with smart substrates for more advanced imaging tasks. In the third main section we describe how these and other microscopy modalities have been implemented in compact and field-portable devices, often based around smartphones. Finally, we conclude with some comments about opportunities and demand for better results, and where we believe the field is heading.

Development of a technique for three-dimensional image reconstruction from emission computed tomograms (ECT)

International Nuclear Information System (INIS)

Gerischer, R.

1987-01-01

The described technique for three-dimensional image reconstruction from ECT sections is based on a simple procedure, which can be carried out with the aid of any standard-type computer used in nuclear medicine and requires no sophisticated arithmetic approach. (TRV) [de

Analytic integration of real-virtual counterterms in NNLO jet cross sections I

Science.gov (United States)

Aglietti, Ugo; Del Duca, Vittorio; Duhr, Claude; Somogyi, Gábor; Trócsányi, Zoltán

2008-09-01

We present analytic evaluations of some integrals needed to give explicitly the integrated real-virtual counterterms, based on a recently proposed subtraction scheme for next-to-next-to-leading order (NNLO) jet cross sections. After an algebraic reduction of the integrals, integration-by-parts identities are used for the reduction to master integrals and for the computation of the master integrals themselves by means of differential equations. The results are written in terms of one- and two-dimensional harmonic polylogarithms, once an extension of the standard basis is made. We expect that the techniques described here will be useful in computing other integrals emerging in calculations in perturbative quantum field theories.

Computer Engineers.

Science.gov (United States)

Moncarz, Roger

2000-01-01

Looks at computer engineers and describes their job, employment outlook, earnings, and training and qualifications. Provides a list of resources related to computer engineering careers and the computer industry. (JOW)

75 FR 30839 - Privacy Act of 1974; CMS Computer Match No. 2010-03, HHS Computer Match No. 1003, SSA Computer...

Science.gov (United States)

2010-06-02

... 1974; CMS Computer Match No. 2010-03, HHS Computer Match No. 1003, SSA Computer Match No. 1048, IRS... Services (CMS). ACTION: Notice of renewal of an existing computer matching program (CMP) that has an...'' section below for comment period. DATES: Effective Dates: CMS filed a report of the Computer Matching...

Terahertz Computed Tomography of NASA Thermal Protection System Materials

Science.gov (United States)

Roth, D. J.; Reyes-Rodriguez, S.; Zimdars, D. A.; Rauser, R. W.; Ussery, W. W.

2011-01-01

A terahertz axial computed tomography system has been developed that uses time domain measurements in order to form cross-sectional image slices and three-dimensional volume renderings of terahertz-transparent materials. The system can inspect samples as large as 0.0283 cubic meters (1 cubic foot) with no safety concerns as for x-ray computed tomography. In this study, the system is evaluated for its ability to detect and characterize flat bottom holes, drilled holes, and embedded voids in foam materials utilized as thermal protection on the external fuel tanks for the Space Shuttle. X-ray micro-computed tomography was also performed on the samples to compare against the terahertz computed tomography results and better define embedded voids. Limits of detectability based on depth and size for the samples used in this study are loosely defined. Image sharpness and morphology characterization ability for terahertz computed tomography are qualitatively described.

Synthetic Computation: Chaos Computing, Logical Stochastic Resonance, and Adaptive Computing

Science.gov (United States)

Kia, Behnam; Murali, K.; Jahed Motlagh, Mohammad-Reza; Sinha, Sudeshna; Ditto, William L.

Nonlinearity and chaos can illustrate numerous behaviors and patterns, and one can select different patterns from this rich library of patterns. In this paper we focus on synthetic computing, a field that engineers and synthesizes nonlinear systems to obtain computation. We explain the importance of nonlinearity, and describe how nonlinear systems can be engineered to perform computation. More specifically, we provide an overview of chaos computing, a field that manually programs chaotic systems to build different types of digital functions. Also we briefly describe logical stochastic resonance (LSR), and then extend the approach of LSR to realize combinational digital logic systems via suitable concatenation of existing logical stochastic resonance blocks. Finally we demonstrate how a chaotic system can be engineered and mated with different machine learning techniques, such as artificial neural networks, random searching, and genetic algorithm, to design different autonomous systems that can adapt and respond to environmental conditions.

29 CFR 794.103 - Dependence of exemption on engagement in described distribution.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Dependence of exemption on engagement in described distribution. 794.103 Section 794.103 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... Act Scope and Application in General § 794.103 Dependence of exemption on engagement in described...

KOP program for calculating cross sections of neutron and charged particle interactions with atomic nuclei using the optical model

International Nuclear Information System (INIS)

Grudzevich, O.D.; Zelenetskij, A.V.; Pashchenko, A.B.

1986-01-01

The last version of the KOP program for calculating cross sections of neutron and charged particle interaction with atomic nuclei within the scope of the optical model is described. The structure and program organization, library of total parameters of the optical potential, program identificators and peculiarities of its operation, input of source data and output of calculational results for printing are described in detail. The KOP program is described in Fortran- and adapted for EC-1033 computer

26 CFR 1.48-2 - New section 38 property.

Science.gov (United States)

2010-04-01

... Computing Credit for Investment in Certain Depreciable Property § 1.48-2 New section 38 property. (a) In... shall be taken into account as the basis of new section 38 property in determining qualified investment... taken into account by the taxpayer in computing qualified investment in new section 38 property. Example...

CAISSE (Computer Aided Information System on Solar Energy) technical manual

Energy Technology Data Exchange (ETDEWEB)

Cantelon, P E; Beinhauer, F W

1979-01-01

The Computer Aided Information System on Solar Energy (CAISSE) was developed to provide the general public with information on solar energy and its potential uses and costs for domestic consumption. CAISSE is an interactive computing system which illustrates solar heating concepts through the use of 35 mm slides, text displays on a screen and a printed report. The user communicates with the computer by responding to questions about his home and heating requirements through a touch sensitive screen. The CAISSE system contains a solar heating simulation model which calculates the heating load capable of being supplied by a solar heating system and uses this information to illustrate installation costs, fuel savings and a 20 year life-cycle analysis of cost and benefits. The system contains several sets of radiation and weather data for Canada and USA. The selection of one of four collector models is based upon the requirements input during the computer session. Optimistic and pessimistic fuel cost forecasts are made for oil, natural gas, electricity, or propane; and the forecasted fuel cost is made the basis of the life cycle cost evaluation for the solar heating application chosen. This manual is organized so that each section describes one major aspect of the use of solar energy systems to provide energy for domestic consumption. The sources of data and technical information and the method of incorporating them into the CAISSE display system are described in the same order as the computer processing. Each section concludes with a list of future developments that could be included to make CAISSE outputs more regionally specific and more useful to designers. 19 refs., 1 tab.

28 CFR 75.6 - Statement describing location of books and records.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Statement describing location of books... of books and records. (a) Any producer of any book, magazine, periodical, film, videotape, digitally... the book, magazine, periodical, film, videotape, digitally- or computer-manipulated image, digital...

Analyzing 3D xylem networks in Vitis vinifera using High Resolution Computed Tomography (HRCT)

Science.gov (United States)

Recent developments in High Resolution Computed Tomography (HRCT) have made it possible to visualize three dimensional (3D) xylem networks without time consuming, labor intensive physical sectioning. Here we describe a new method to visualize complex vessel networks in plants and produce a quantitat...

[Towards computer-aided catalyst design: Three effective core potential studies of C-H activation]. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

Research in the initial grant period focused on computational studies relevant to the selective activation of methane, the prime component of natural gas. Reaction coordinates for methane activation by experimental models were delineated, as well as the bonding and structure of complexes that effect this important reaction. This research, highlighted in the following sections, also provided the impetus for further development, and application of methods for modeling metal-containing catalysts. Sections of the report describe the following: methane activation by multiple-bonded transition metal complexes; computational lanthanide chemistry; and methane activation by non-imido, multiple-bonded ligands.

Parental use of the term "Hot Qi" to describe symptoms in their children in Hong Kong: a cross sectional survey "Hot Qi" in children

Directory of Open Access Journals (Sweden)

Chan Danny

2006-01-01

Full Text Available Abstract Background The Chinese term "Hot Qi" is often used by parents to describe symptoms in their children. The current study was carried out to estimate the prevalence of using the Chinese term "Hot Qi" to describe symptoms in children by their parents and the symptomatology of "Hot Qi". Method A cross sectional survey by face-to-face interview with a semi-structured questionnaire was carried out in a public hospital and a private clinic in Hong Kong. The parental use of the term "Hot Qi", the symptoms of "Hot Qi" and the remedies used for "Hot Qi" were asked. Results 1060 pairs of children and parents were interviewed. 903 (85.1% of parents claimed that they had employed the term "Hot Qi" to describe their children's symptoms. Age of children and place of birth of parents were the predictors of parents using the term "Hot Qi". Eye discharge (37.2%, sore throat (33.9%, halitosis(32.8%, constipation(31.0%, and irritable (21.2% were the top five symptoms of "Hot Qi" in children. The top five remedies for "Hot Qi" were the increased consumption of water (86.8%, fruit (72.5%, soup (70.5%, and the use of herbal beverages "five-flower- tea" (a combination of several flowers such as Chrysanthemum morifolii, Lonicera japonica, Bombax malabaricum, Sophora japonica, and Plumeria rubra (57.6% or selfheal fruit spike (Prunella vulgaris (42.4%. Conclusion "Hot Qi" is often used by Chinese parents to describe symptoms in their children in Hong Kong. Place of birth of parents and age of the children are main factors for parents to apply the term "Hot Qi" to describe symptoms of their children. The common symptoms of "Hot Qi" suggest infections or allergy.

Connectivity to computers and the Internet among patients with schizophrenia spectrum disorders: a cross-sectional study

Directory of Open Access Journals (Sweden)

Välimäki M

2017-04-01

Full Text Available Maritta Välimäki,1–3 Lauri Kuosmanen,1,4,5 Heli Hätönen,1 Marita Koivunen,1,6 Anneli Pitkänen,7 Christina Athanasopoulou,1 Minna Anttila1 1Department of Nursing Science, Faculty of Medicine, University of Turku, Finland; 2Development Unit, Turku University Hospital, Turku, Finland; 3School of Nursing, Hong Kong Polytechnic University, Kowloon, Hong Kong, SAR, China; 4University of Helsinki and Helsinki University Hospital, Helsinki, Finland; 5Social and Healthcare Department, City of Vantaa, Vantaa, Finland; 6Administrative Centre, Research and Development, Satakunta Hospital District, Pori, Finland; 7Administration Centre, Pirkanmaa Hospital District, Tampere, Finland Purpose: Information and communication technologies have been developed for a variety of health care applications and user groups in the field of health care. This study examined the connectivity to computers and the Internet among patients with schizophrenia spectrum disorders (SSDs.Patients and methods: A cross-sectional survey design was used to study 311 adults with SSDs from the inpatient units of two psychiatric hospitals in Finland. The data collection lasted for 20 months and was done through patients’ medical records and a self-reported, structured questionnaire. Data analysis included descriptive statistics.Results: In total, 297 patients were included in this study (response rate =96%. More than half of them (n=156; 55% had a computer and less than half of them (n=127; 44% had the Internet at home. Of those who generally had access to computers and the Internet, more than one-fourth (n=85; 29% used computers daily, and >30% (n=96; 33% never accessed the Internet. In total, approximately one-fourth of them (n=134; 25% learned to use computers, and less than one-third of them (n=143; 31% were known to use the Internet by themselves. Older people (aged 45–65 years and those with less years of education (primary school tended not to use the computers and the

Program X4TOC4 (Version 86-1). Translation of experimental data from the EXFOR format to a computation format

International Nuclear Information System (INIS)

Cullen, D.E.

1986-09-01

Experimental nuclear reaction data are world-wide compiled in EXFOR format. The computer program X4TOC4 described in the present document translates data from the rather flexible EXFOR format to the more rigid ''computation format'' which is suitable for input to further computer processing of the data including graphical plotting. The program is available costfree from the IAEA Nuclear Data Section, upon request. (author)

A database of fragmentation cross section measurements applicable to cosmic ray propagation calculations

International Nuclear Information System (INIS)

Crawford, H.J.; Engelage, J.; Jones, F.C.

1989-08-01

A database of single particle inclusive fragment production cross section measurements has been established and is accessible over common computer networks. These measurements have been obtained from both published literature and direct communication with experimenters and include cross sections for nuclear beams on H, He, and heavier targets, and for H and He beams on nuclear targets, for energies >30 MeV/nucleon. These cross sections are directly applicable to calculations involving cosmic ray nuclear interactions with matter. The data base includes projectile, target, and fragment specifications, beam energy, cross section with uncertainty, literature reference, and comment code. It is continuously updated to assure accuracy and completeness. Also available are widely used semi-empirical formulations for calculating production cross sections and excitation functions. In this paper we discuss the database in detail and describe how it can be accessed. We compare the measurements with semi-empirical calculations and point out areas where improved calculations and further cross section measurements are required. 5 refs., 2 figs

Neutron secondary-particle production cross sections and their incorporation into Monte-Carlo transport codes

International Nuclear Information System (INIS)

Brenner, D.J.; Prael, R.E.; Little, R.C.

1987-01-01

Realistic simulations of the passage of fast neutrons through tissue require a large quantity of cross-sectional data. What are needed are differential (in particle type, energy and angle) cross sections. A computer code is described which produces such spectra for neutrons above ∼14 MeV incident on light nuclei such as carbon and oxygen. Comparisons have been made with experimental measurements of double-differential secondary charged-particle production on carbon and oxygen at energies from 27 to 60 MeV; they indicate that the model is adequate in this energy range. In order to utilize fully the results of these calculations, they should be incorporated into a neutron transport code. This requires defining a generalized format for describing charged-particle production, putting the calculated results in this format, interfacing the neutron transport code with these data, and charged-particle transport. The design and development of such a program is described. 13 refs., 3 figs

Computed tomographic, magnetic resonance imaging, and cross-sectional anatomic features of the manus in a normal American black bear (Ursus americanus).

Science.gov (United States)

Ober, C P; Freeman, L E

2010-06-01

The purpose of this study was to provide a detailed description of cross-sectional anatomic structures of the manus of a black bear cadaver and correlate anatomic findings with corresponding features in computed tomographic (CT) and magnetic resonance (MR) images. CT, MR imaging, and transverse sectioning were performed on the thoracic limb of a cadaver female black bear which had no evidence of lameness or thoracic limb abnormality prior to death. Features in CT and MR images corresponding to clinically important anatomic structures in anatomic sections were identified. Most of the structures identified in transverse anatomic sections were also identified using CT and MR imaging. Bones, muscles and tendons were generally easily identified with both imaging modalities, although divisions between adjacent muscles were rarely visible with CT and only visible sometimes with MR imaging. Vascular structures could not be identified with either imaging modality.

Factors influencing health professions students' use of computers for data analysis at three Ugandan public medical schools: a cross-sectional survey.

Science.gov (United States)

Munabi, Ian G; Buwembo, William; Bajunirwe, Francis; Kitara, David Lagoro; Joseph, Ruberwa; Peter, Kawungezi; Obua, Celestino; Quinn, John; Mwaka, Erisa S

2015-02-25

Effective utilization of computers and their applications in medical education and research is of paramount importance to students. The objective of this study was to determine the association between owning a computer and use of computers for research data analysis and the other factors influencing health professions students' computer use for data analysis. We conducted a cross sectional study among undergraduate health professions students at three public universities in Uganda using a self-administered questionnaire. The questionnaire was composed of questions on participant demographics, students' participation in research, computer ownership, and use of computers for data analysis. Descriptive and inferential statistics (uni-variable and multi- level logistic regression analysis) were used to analyse data. The level of significance was set at 0.05. Six hundred (600) of 668 questionnaires were completed and returned (response rate 89.8%). A majority of respondents were male (68.8%) and 75.3% reported owning computers. Overall, 63.7% of respondents reported that they had ever done computer based data analysis. The following factors were significant predictors of having ever done computer based data analysis: ownership of a computer (adj. OR 1.80, p = 0.02), recently completed course in statistics (Adj. OR 1.48, p =0.04), and participation in research (Adj. OR 2.64, p <0.01). Owning a computer, participation in research and undertaking courses in research methods influence undergraduate students' use of computers for research data analysis. Students are increasingly participating in research, and thus need to have competencies for the successful conduct of research. Medical training institutions should encourage both curricular and extra-curricular efforts to enhance research capacity in line with the modern theories of adult learning.

Imprecise results: Utilizing partial computations in real-time systems

Science.gov (United States)

Lin, Kwei-Jay; Natarajan, Swaminathan; Liu, Jane W.-S.

1987-01-01

In real-time systems, a computation may not have time to complete its execution because of deadline requirements. In such cases, no result except the approximate results produced by the computations up to that point will be available. It is desirable to utilize these imprecise results if possible. Two approaches are proposed to enable computations to return imprecise results when executions cannot be completed normally. The milestone approach records results periodically, and if a deadline is reached, returns the last recorded result. The sieve approach demarcates sections of code which can be skipped if the time available is insufficient. By using these approaches, the system is able to produce imprecise results when deadlines are reached. The design of the Concord project is described which supports imprecise computations using these techniques. Also presented is a general model of imprecise computations using these techniques, as well as one which takes into account the influence of the environment, showing where the latter approach fits into this model.

Modifications in the UNIMUG computer code (Addendum to technical note EAV/NT--003/80)

International Nuclear Information System (INIS)

Alcantara, H.G. de; Rosa, M.A.P.

1983-01-01

The modifications done in the UNIMUG computer code are described. The UNIMUG-VERSION 3 has options for condensating macroscopic cross sections in regions and microscopic cross sections of isotopes contained in each region. The code also calculates: spectral index, ratio between two specificated reactions of chosen isotopes in indicated groups and regions, average buckling by region/group, by region, reactor buckling and average flux of reactor. The code has no restrictions for number of regions, number of groups, number of intervals, and table size of macroscopic and microscopic cross sections. (M.C.K.) [pt

The NIRA computer program package (photonuclear data center). Final report

International Nuclear Information System (INIS)

Vander Molen, H.J.; Gerstenberg, H.M.

1976-02-01

The Photonuclear Data Center's NIRA library of programs, executable from mass storage on the National Bureau of Standard's central computer facility, is described. Detailed instructions are given (with examples) for the use of the library to analyze, evaluate, synthesize, and produce for publication camera-ready tabular and graphical presentations of digital photonuclear reaction cross-section data. NIRA is the acronym for Nuclear Information Research Associate

Computed tomography and cross-sectional anatomy of the metatarsus and digits of the one-humped camel (Camelus dromedarius) and buffalo ( Bos bubalis).

Science.gov (United States)

El-Shafey, A; Kassab, A

2013-04-01

The purpose of the present study was to provide a detailed computed tomography (CT) and cross-sectional anatomic reference of the normal metatarsus and digits for the camel and buffalo, as well as to compare between metatarsus and digits in these animals to outstand a basis for diagnosis of their diseases. Advantages, including depiction of detailed cross-sectional anatomy, improved contrast resolution and computer reformatting, make it a potentially valuable diagnostic technique. The hind limbs of 12 healthy adult camel and buffalo were used. Clinically relevant anatomic structures were identified and labelled at each level in the corresponding images (CT and anatomic slices). CT images were used to identify the bony and soft tissue structures of the metatarsus and digits. The knowledge of normal anatomy of the camel and buffalo metatarsus and digits would serve as initial reference to the evaluation of CT images in these species. © 2012 Blackwell Verlag GmbH.

26 CFR 1.884-0 - Overview of regulation provisions for section 884.

Science.gov (United States)

2010-04-01

... provisions for section 884. (a) Introduction. Section 884 consists of three main parts: a branch profits tax... for computing the branch profits tax and defines various terms that affect the computation of the tax... domestic subsidiary. (2) The branch-level interest tax. Section 1.884-4 provides rules for computing the...

Proceedings of the 6th Computer Science On-line Conference 2017

CERN Document Server

Senkerik, Roman; Oplatkova, Zuzana; Prokopova, Zdenka; Silhavy, Petr

2017-01-01

This book presents new methods and approaches to real-world problems as well as exploratory research that describes novel artificial intelligence applications, including deep learning, neural networks and hybrid algorithms. This book constitutes the refereed proceedings of the Artificial Intelligence Trends in Intelligent Systems Section of the 6th Computer Science On-line Conference 2017 (CSOC 2017), held in April 2017. .

Citham a computer code for calculating fuel depletion-description, tests, modifications and evaluation

International Nuclear Information System (INIS)

Alvarenga, M.A.B.

1984-12-01

The CITHAN computer code was developed at IPEN (Instituto de Pesquisas Energeticas e Nucleares) to link the HAMMER computer code with a fuel depletion routine and to provide neutron cross sections to be read with the appropriate format of the CITATION code. The problem arised due to the efforts to addapt the new version denomined HAMMER-TECHION with the routine refered. The HAMMER-TECHION computer code was elaborated by Haifa Institute, Israel within a project with EPRI. This version is at CNEN to be used in multigroup constant generation for neutron diffusion calculation in the scope of the new methodology to be adopted by CNEN. The theoretical formulation of CITHAM computer code, tests and modificatins are described. (Author) [pt

An analytical procedure for computing smooth transitions between two specified cross sections with applications to blended wing body configuration

Science.gov (United States)

Barger, R. L.

1982-01-01

An analytical procedure is described for designing smooth transition surfaces for blended wing-body configurations. Starting from two specified cross section shapes, the procedure generates a gradual transition from one cross section shape to the other as an analytic blend of the two shapes. The method utilizes a conformal mapping, with subsequent translation and scaling, to transform the specified and shapes to curves that can be combined more smoothly. A sample calculation is applied to a blended wing-body missile type configuration with a top mounted inlet.

Time-Dependent S{sub N} Calculations Describing Pulsed Source Experiments at the FRO Reactor

Energy Technology Data Exchange (ETDEWEB)

Bergstrom, A.; Kockum, J.; Soderberg, S. [Research Institute of National Defence, Stockholm (Sweden)

1968-04-15

In view of the difficulties in describing pulsed source experiments quantitatively in assemblies consisting of a fast core and a light reflector, a time-dependent S{sub N} code has been applied to this type of assembly. The code, written for the IBM 7090 computer, divides time into short intervals and computes the flux in spherical geometry for each interval using the Carlson S{sub N} scheme. The source term is obtained by extrapolation from two earlier time-intervals. Several problems in connection with the discretization of the time, space and energy dimensions are discussed. For the sub-critical assembly studied the treatment of the lower energy-groups is decisive for the numerical stability. A 22-group cross-section set with a low energy cut-off at 0.04 eV obtained with the SPENG programme has been used. The time intervals are varied continuously and are set proportional to the inverse of the maximum logarithmic time-derivative of the space and energy-dependent flux with the further restriction that they are not allowed to increase above a predetermined value. In a typical case, the intervals vary between 10{sup -9} and 10{sup -8} sec. The memory of the computer is fully exploited when 22 energy groups and 46 radial points are used. The computing time for each time-interval is about 6 sec. The code has been applied to a 3.5% sub-critical assembly consisting of a 20% enriched, spherical uranium metal core with a thick copper reflector and the calculations have been compared to experiments with good agreement. The calculations show that spectral equilibrium below 10 keV is not reached until times long compared to the usual measuring times and that the exponential decay finally reached is entirely determined by reflector properties at almost thermal energies. It is also shown that the simple one- and two-region models are inadequate in this case and that no time-independent prompt neutron life-time can be obtained from the measurements. (author)

Sectional depiction of the pelvic floor by CT, MR imaging and sheet plastination: computer-aided correlation and 3D model

Energy Technology Data Exchange (ETDEWEB)

Beyersdorff, D.; Taupitz, M.; Hamm, B. [Dept. of Radiology, Humboldt Univ., Berlin (Germany); Schiemann, T. [Inst. for Mathematics and Computer Science in Medicine, University of Hamburg (Germany); Kooijman, H. [Philips Medical Systems, Hamburg (Germany); Nicolas, V. [Dept. of Radiology and Nuclear Medicine, BG Kliniken Bergmannsheil, Bochum (Germany)

2001-04-01

The structures of the pelvic floor are clinically important but difficult to assess. To facilitate the understanding of the complicated pelvic floor anatomy on sectional images obtained by CT and MR imaging, and to make the representation more vivid, a computer-aided 3D model was created from a male and a female torso to develop a teaching tool. A male and a female cadaver torso were investigated by means of CT, MR imaging, and serial-section sheet plastination. A 3D reconstruction of the pelvic floor and adjacent structures was performed by fusion of CT and MR imaging data sets with sheet plastination sections. Corresponding sections from all three methods could be compared and visualized in their 3D context. Sheet plastination allows distinction of connective tissue, muscles, and pelvic organs down to a microscopic level. In combination with CT, MR imaging, and sheet plastination a 3D model of the pelvic floor offers a better understanding of the complex pelvic anatomy. This knowledge may be applied in the diagnostic imaging of urinary incontinence or prolapse and prior to prostate surgery. (orig.)

A rigorous pole representation of multilevel cross sections and its practical applications

International Nuclear Information System (INIS)

Hwang, R.N.

1987-01-01

In this article a rigorous method for representing the multilevel cross sections and its practical applications are described. It is a generalization of the rationale suggested by de Saussure and Perez for the s-wave resonances. A computer code WHOPPER has been developed to convert the Reich-Moore parameters into the pole and residue parameters in momentum space. Sample calculations have been carried out to illustrate that the proposed method preserves the rigor of the Reich-Moore cross sections exactly. An analytical method has been developed to evaluate the pertinent Doppler-broadened line shape functions. A discussion is presented on how to minimize the number of pole parameters so that the existing reactor codes can be best utilized

Neutron cross section library production code system for continuous energy Monte Carlo code MVP. LICEM

International Nuclear Information System (INIS)

Mori, Takamasa; Nakagawa, Masayuki; Kaneko, Kunio.

1996-05-01

A code system has been developed to produce neutron cross section libraries for the MVP continuous energy Monte Carlo code from an evaluated nuclear data library in the ENDF format. The code system consists of 9 computer codes, and can process nuclear data in the latest ENDF-6 format. By using the present system, MVP neutron cross section libraries for important nuclides in reactor core analyses, shielding and fusion neutronics calculations have been prepared from JENDL-3.1, JENDL-3.2, JENDL-FUSION file and ENDF/B-VI data bases. This report describes the format of MVP neutron cross section library, the details of each code in the code system and how to use them. (author)

Neutron cross section library production code system for continuous energy Monte Carlo code MVP. LICEM

Energy Technology Data Exchange (ETDEWEB)

Mori, Takamasa; Nakagawa, Masayuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kaneko, Kunio

1996-05-01

A code system has been developed to produce neutron cross section libraries for the MVP continuous energy Monte Carlo code from an evaluated nuclear data library in the ENDF format. The code system consists of 9 computer codes, and can process nuclear data in the latest ENDF-6 format. By using the present system, MVP neutron cross section libraries for important nuclides in reactor core analyses, shielding and fusion neutronics calculations have been prepared from JENDL-3.1, JENDL-3.2, JENDL-FUSION file and ENDF/B-VI data bases. This report describes the format of MVP neutron cross section library, the details of each code in the code system and how to use them. (author).

National Uranium Resource Evaluation Program. Hydrogeochemical and Stream Sediment Reconnaissance Basic Data Reports Computer Program Requests Manual

International Nuclear Information System (INIS)

1980-01-01

This manual is intended to aid those who are unfamiliar with ordering computer output for verification and preparation of Uranium Resource Evaluation (URE) Project reconnaissance basic data reports. The manual is also intended to help standardize the procedures for preparing the reports. Each section describes a program or group of related programs. The sections are divided into three parts: Purpose, Request Forms, and Requested Information

Computer aided optimum design of rubble-mound breakwater cross-sections : Manual of the RUMBA computer package, release 1

NARCIS (Netherlands)

De Haan, W.

1989-01-01

The computation of the optimum rubble-mound breakwater crosssection is executed on a micro-computer. The RUMBA computer package consists of two main parts: the optimization process is executed by a Turbo Pascal programme, the second part consists of editing functions written in AutoLISP. AutoLISP is

MOX Cross-Section Libraries for ORIGEN-ARP

International Nuclear Information System (INIS)

Gauld, I.C.

2003-01-01

The use of mixed-oxide (MOX) fuel in commercial nuclear power reactors operated in Europe has expanded rapidly over the past decade. The predicted characteristics of MOX fuel such as the nuclide inventories, thermal power from decay heat, and radiation sources are required for design and safety evaluations, and can provide valuable information for non-destructive safeguards verification activities. This report describes the development of computational methods and cross-section libraries suitable for the analysis of irradiated MOX fuel with the widely-used and recognized ORIGEN-ARP isotope generation and depletion code of the SCALE (Standardized Computer Analyses for Licensing Evaluation) code system. The MOX libraries are designed to be used with the Automatic Rapid Processing (ARP) module of SCALE that interpolates appropriate values of the cross sections from a database of parameterized cross-section libraries to create a problem-dependent library for the burnup analysis. The methods in ORIGEN-ARP, originally designed for uranium-based fuels only, have been significantly upgraded to handle the larger number of interpolation parameters associated with MOX fuels. The new methods have been incorporated in a new version of the ARP code that can generate libraries for low-enriched uranium (LEU) and MOX fuel types. The MOX data libraries and interpolation algorithms in ORIGEN-ARP have been verified using a database of declared isotopic concentrations for 1042 European MOX fuel assemblies. The methods and data are validated using a numerical MOX fuel benchmark established by the Organization for Economic Cooperation and Development (OECD) Working Group on burnup credit and nuclide assay measurements for irradiated MOX fuel performed as part of the Belgonucleaire ARIANE International Program

Computer-aided roll pass design in rolling of airfoil shapes

Science.gov (United States)

Akgerman, N.; Lahoti, G. D.; Altan, T.

1980-01-01

This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

Talys calculations for evaluation of neutron-induced single-event upset cross sections

Energy Technology Data Exchange (ETDEWEB)

Bourselier, Jean-Christophe

2005-08-15

The computer code TALYS has been used to calculate interactions between cosmic-ray neutrons and silicon nuclei with the goal to describe single-event upset (SEU) cross sections in microelectronics devices. Calculations for the Si(n,X) reaction extend over an energy range of 2 to 200 MeV. The obtained energy spectra of the resulting residuals and light-ions have been integrated using several different critical charges as SEU threshold. It is found that the SEU cross section seems largely to be dominated by {sup 28}Si recoils from elastic scattering. Furthermore, the shape of the SEU cross section as a function of the energy of the incoming neutron changes drastically with decreasing critical charge. The results presented in this report stress the importance of performing studies at mono-energetic neutron beams to advance the understanding of the underlying mechanisms causing SEUs.

Talys calculations for evaluation of neutron-induced single-event upset cross sections

International Nuclear Information System (INIS)

Bourselier, Jean-Christophe

2005-08-01

The computer code TALYS has been used to calculate interactions between cosmic-ray neutrons and silicon nuclei with the goal to describe single-event upset (SEU) cross sections in microelectronics devices. Calculations for the Si(n,X) reaction extend over an energy range of 2 to 200 MeV. The obtained energy spectra of the resulting residuals and light-ions have been integrated using several different critical charges as SEU threshold. It is found that the SEU cross section seems largely to be dominated by 28 Si recoils from elastic scattering. Furthermore, the shape of the SEU cross section as a function of the energy of the incoming neutron changes drastically with decreasing critical charge. The results presented in this report stress the importance of performing studies at mono-energetic neutron beams to advance the understanding of the underlying mechanisms causing SEUs

FORIG: a computer code for calculating radionuclide generation and depletion in fusion and fission reactors. User's manual

International Nuclear Information System (INIS)

Blink, J.A.

1985-03-01

In this manual we describe the use of the FORIG computer code to solve isotope-generation and depletion problems in fusion and fission reactors. FORIG runs on a Cray-1 computer and accepts more extensive activation cross sections than ORIGEN2 from which it was adapted. This report is an updated and a combined version of the previous ORIGEN2 and FORIG manuals. 7 refs., 15 figs., 13 tabs

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Science.gov (United States)

2010-10-01

... at one site or multiple site licenses, and the format and media in which the software or... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software...

STRAY - An interactive program for the computation of stray radiation in infrared telescopes

Science.gov (United States)

St. Clair Dinger, Ann

1987-01-01

The STRAY program to model the amount of stray radiation reaching the focal plane of a well-baffled telescope is described. The STRAY telescope model is addressed, including the aperture shade, barrel baffle, optics, mirror sectioning and chopping, and off-axis points in focal plane. The possible illumination paths are shown, and calculation options using STRAY are discussed. The stored data and computational aspects of STRAY are addressed. STRAY is compared to the MINI-APART model, and applications of STRAY are described.

SENSIT: a cross-section and design sensitivity and uncertainty analysis code

International Nuclear Information System (INIS)

Gerstl, S.A.W.

1980-01-01

SENSIT computes the sensitivity and uncertainty of a calculated integral response (such as a dose rate) due to input cross sections and their uncertainties. Sensitivity profiles are computed for neutron and gamma-ray reaction cross sections of standard multigroup cross section sets and for secondary energy distributions (SEDs) of multigroup scattering matrices. In the design sensitivity mode, SENSIT computes changes in an integral response due to design changes and gives the appropriate sensitivity coefficients. Cross section uncertainty analyses are performed for three types of input data uncertainties: cross-section covariance matrices for pairs of multigroup reaction cross sections, spectral shape uncertainty parameters for secondary energy distributions (integral SED uncertainties), and covariance matrices for energy-dependent response functions. For all three types of data uncertainties SENSIT computes the resulting variance and estimated standard deviation in an integral response of interest, on the basis of generalized perturbation theory. SENSIT attempts to be more comprehensive than earlier sensitivity analysis codes, such as SWANLAKE

Heat Transfer Computations of Internal Duct Flows With Combined Hydraulic and Thermal Developing Length

Science.gov (United States)

Wang, C. R.; Towne, C. E.; Hippensteele, S. A.; Poinsatte, P. E.

1997-01-01

This study investigated the Navier-Stokes computations of the surface heat transfer coefficients of a transition duct flow. A transition duct from an axisymmetric cross section to a non-axisymmetric cross section, is usually used to connect the turbine exit to the nozzle. As the gas turbine inlet temperature increases, the transition duct is subjected to the high temperature at the gas turbine exit. The transition duct flow has combined development of hydraulic and thermal entry length. The design of the transition duct required accurate surface heat transfer coefficients. The Navier-Stokes computational method could be used to predict the surface heat transfer coefficients of a transition duct flow. The Proteus three-dimensional Navier-Stokes numerical computational code was used in this study. The code was first studied for the computations of the turbulent developing flow properties within a circular duct and a square duct. The code was then used to compute the turbulent flow properties of a transition duct flow. The computational results of the surface pressure, the skin friction factor, and the surface heat transfer coefficient were described and compared with their values obtained from theoretical analyses or experiments. The comparison showed that the Navier-Stokes computation could predict approximately the surface heat transfer coefficients of a transition duct flow.

HAUFES : a FORTRAN code for the calculation of compound nuclear cross-sections by Hauser-Feshbach theory

International Nuclear Information System (INIS)

Viyogi, Y.P.; Ganguly, N.K.

1975-01-01

The FORTRAN code described in the report has been developed for the BESM-6 computer with a view to calculate the cross-section of reactions proceeding via the formation of compound nucleus for all open two-body reaction channels using Hauser-Feshbach theory with Moldauer's correction for the fluctuation of level widths. The code can also be used to analyse data from 'crystal blocking' experiments to obtain nuclear level densities. The report describes the input-output specifications along with a short account of the algorithm of the program. (author)

ENDF/B Pre-Processing Codes: Implementing and testing on a Personal Computer

International Nuclear Information System (INIS)

McLaughlin, P.K.

1987-05-01

This document describes the contents of the diskettes containing the ENDF/B Pre-Processing codes by D.E. Cullen, and example data for use in implementing and testing these codes on a Personal Computer of the type IBM-PC/AT. Upon request the codes are available from the IAEA Nuclear Data Section, free of charge, on a series of 7 diskettes. (author)

High Performance Computing Facility Operational Assessment, FY 2011 Oak Ridge Leadership Computing Facility

Energy Technology Data Exchange (ETDEWEB)

Baker, Ann E [ORNL; Bland, Arthur S Buddy [ORNL; Hack, James J [ORNL; Barker, Ashley D [ORNL; Boudwin, Kathlyn J. [ORNL; Kendall, Ricky A [ORNL; Messer, Bronson [ORNL; Rogers, James H [ORNL; Shipman, Galen M [ORNL; Wells, Jack C [ORNL; White, Julia C [ORNL

2011-08-01

Oak Ridge National Laboratory's Leadership Computing Facility (OLCF) continues to deliver the most powerful resources in the U.S. for open science. At 2.33 petaflops peak performance, the Cray XT Jaguar delivered more than 1.5 billion core hours in calendar year (CY) 2010 to researchers around the world for computational simulations relevant to national and energy security; advancing the frontiers of knowledge in physical sciences and areas of biological, medical, environmental, and computer sciences; and providing world-class research facilities for the nation's science enterprise. Scientific achievements by OLCF users range from collaboration with university experimentalists to produce a working supercapacitor that uses atom-thick sheets of carbon materials to finely determining the resolution requirements for simulations of coal gasifiers and their components, thus laying the foundation for development of commercial-scale gasifiers. OLCF users are pushing the boundaries with software applications sustaining more than one petaflop of performance in the quest to illuminate the fundamental nature of electronic devices. Other teams of researchers are working to resolve predictive capabilities of climate models, to refine and validate genome sequencing, and to explore the most fundamental materials in nature - quarks and gluons - and their unique properties. Details of these scientific endeavors - not possible without access to leadership-class computing resources - are detailed in Section 4 of this report and in the INCITE in Review. Effective operations of the OLCF play a key role in the scientific missions and accomplishments of its users. This Operational Assessment Report (OAR) will delineate the policies, procedures, and innovations implemented by the OLCF to continue delivering a petaflop-scale resource for cutting-edge research. The 2010 operational assessment of the OLCF yielded recommendations that have been addressed (Reference Section 1) and

A Pebble Bed Reactor cross section methodology

International Nuclear Information System (INIS)

Hudson, Nathanael H.; Ougouag, Abderrafi M.; Rahnema, Farzad; Gougar, Hans

2009-01-01

A method is presented for the evaluation of microscopic cross sections for the Pebble Bed Reactor (PBR) neutron diffusion computational models during convergence to an equilibrium (asymptotic) fuel cycle. This method considers the isotopics within a core spectral zone and the leakages from such a zone as they arise during reactor operation. The randomness of the spatial distribution of fuel grains within the fuel pebbles and that of the fuel and moderator pebbles within the core, the double heterogeneity of the fuel, and the indeterminate burnup of the spectral zones all pose a unique challenge for the computation of the local microscopic cross sections. As prior knowledge of the equilibrium composition and leakage is not available, it is necessary to repeatedly re-compute the group constants with updated zone information. A method is presented to account for local spectral zone composition and leakage effects without resorting to frequent spectrum code calls. Fine group data are pre-computed for a range of isotopic states. Microscopic cross sections and zone nuclide number densities are used to construct fine group macroscopic cross sections, which, together with fission spectra, flux modulation factors, and zone buckling, are used in the solution of the slowing down balance to generate a new or updated spectrum. The microscopic cross-sections are then re-collapsed with the new spectrum for the local spectral zone. This technique is named the Spectral History Correction (SHC) method. It is found that this method accurately recalculates local broad group microscopic cross sections. Significant improvement in the core eigenvalue, flux, and power peaking factor is observed when the local cross sections are corrected for the effects of the spectral zone composition and leakage in two-dimensional PBR test problems.

Advanced information processing system: Inter-computer communication services

Science.gov (United States)

Burkhardt, Laura; Masotto, Tom; Sims, J. Terry; Whittredge, Roy; Alger, Linda S.

1991-01-01

The purpose is to document the functional requirements and detailed specifications for the Inter-Computer Communications Services (ICCS) of the Advanced Information Processing System (AIPS). An introductory section is provided to outline the overall architecture and functional requirements of the AIPS and to present an overview of the ICCS. An overview of the AIPS architecture as well as a brief description of the AIPS software is given. The guarantees of the ICCS are provided, and the ICCS is described as a seven-layered International Standards Organization (ISO) Model. The ICCS functional requirements, functional design, and detailed specifications as well as each layer of the ICCS are also described. A summary of results and suggestions for future work are presented.

Current drive by Alfvacute en waves in elongated cross-section tokamak

International Nuclear Information System (INIS)

Tsypin, V.S.; Elfimov, A.G.; Nekrasov, F.M.; de Azevedo, C.A.; de Assis, A.S.

1997-01-01

The general approach to the Alfvacute en wave current drive problem in tokamaks with elongated transverse cross-sections was considered in this paper. Model approximations are used to describe circulating and trapped particle dynamics. This approach gives the accuracy of some percents. The expressions for the time-averaged longitudinal current and the radio-frequency currents have been obtained. They are supposed to be useful for a further analytical and computational solution of this problem. As an example, kinetic Alfvacute en waves are considered in this paper. copyright 1997 American Institute of Physics

GNASH: a preequilibrium, statistical nuclear-model code for calculation of cross sections and emission spectra

International Nuclear Information System (INIS)

Young, P.G.; Arthur, E.D.

1977-11-01

A new multistep Hauser--Feshbach code that includes corrections for preequilibrium effects is described. The code can calculate up to 60 decay reactions (cross sections and energy spectra) in one computation, and thereby provide considerable flexibility for handling processes with complicated reaction chains. Input parameter setup, problem output, and subroutine descriptions are given along with a sample problem calculation. A brief theoretical description is also included. 8 figures, 3 tables

77 FR 26041 - Certain Computers and Computer Peripheral Devices and Components Thereof and Products Containing...

Science.gov (United States)

2012-05-02

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-841] Certain Computers and Computer Peripheral... after importation of certain computers and computer peripheral devices and components thereof and... industry in the United States exists as required by subsection (a)(2) of section 337. The complainant...

Implementation of an embedded computer

OpenAIRE

Pikl, Bojan

2011-01-01

The goal of this thesis is to describe a production of an embedded computer. The thesis describes development and production of an embedded computer for the medical diode laser DL30 that is being developed in Robomed d.o.o.. The first part of the thesis describes the choice of hardware devices. I mostly describe the technologies that one can buy on the market. Moreover for every part of the computer installed and developed there is an argument why we selected that exact part. The second part ...

User's guide for SAMMY: a computer model for multilevel r-matrix fits to neutron data using Bayes' equations

International Nuclear Information System (INIS)

Larson, N.M.; Perey, F.G.

1980-11-01

A method is described for determining the parameters of a model from experimental data based upon the utilization of Bayes' theorem. This method has several advantages over the least-squares method as it is commonly used; one important advantage is that the assumptions under which the parameter values have been determined are more clearly evident than in many results based upon least squares. Bayes' method has been used to develop a computer code which can be utilized to analyze neutron cross-section data by means of the R-matrix theory. The required formulae from the R-matrix theory are presented, and the computer implementation of both Bayes' equations and R-matrix theory is described. Details about the computer code and compelte input/output information are given

Sociodemographic differences in dietary habits described by food frequency questions--results from Denmark.

Science.gov (United States)

Dynesen, A W; Haraldsdóttir, J; Holm, L; Astrup, A

2003-12-01

To investigate whether a modest number of food frequency questions are sufficient to describe sociodemographic differences in dietary habits, and to identify sociodemographic characteristics of subjects adhering to food-based dietary guidelines operationalised in a "healthy-diet index". Cross-sectional population survey. A total of 480 men, 515 women, aged 15-90 y. Random sample of private telephone numbers drawn from regional telephone records, geographically stratified. Participation rate 62%. Computer-assisted telephone interviews, including six food frequency questions, a question on type of fat spreads used on bread, questions on seven sociodemographic variables. The summary of the healthy-diet index showed that the subjects who adhered to food-based dietary guidelines (top quintile) compared to those who did not (bottom quintile) were most often women (odds ratio (OR)=6.07; confidence interval (CI): 3.91-9.43, women vs men), of older age (OR=9.72; CI: 3.02-31.31, old age vs young), highly educated (OR=3.69; CI: 1.53-8.92, high education vs low) and living in multiperson households including children (OR=4.66; CI: 2.47-8.80, multiperson household vs single household). The results also showed that gender difference in dietary habits is associated with other sociodemographic variables. The selected food frequency questions proved sufficient to describe sociodemographic differences in dietary habits, and this method may be a valuable supplement to traditional quantitative dietary surveys in monitoring sociodemographic changes in eating patterns. The results also underline the influence of sociodemographic status on dietary habits. The Danish Nutrition Council funded the study.

Computer Models for IRIS Control System Transient Analysis

International Nuclear Information System (INIS)

Gary D Storrick; Bojan Petrovic; Luca Oriani

2007-01-01

This report presents results of the Westinghouse work performed under Task 3 of this Financial Assistance Award and it satisfies a Level 2 Milestone for the project. Task 3 of the collaborative effort between ORNL, Brazil and Westinghouse for the International Nuclear Energy Research Initiative entitled 'Development of Advanced Instrumentation and Control for an Integrated Primary System Reactor' focuses on developing computer models for transient analysis. This report summarizes the work performed under Task 3 on developing control system models. The present state of the IRIS plant design--such as the lack of a detailed secondary system or I and C system designs--makes finalizing models impossible at this time. However, this did not prevent making considerable progress. Westinghouse has several working models in use to further the IRIS design. We expect to continue modifying the models to incorporate the latest design information until the final IRIS unit becomes operational. Section 1.2 outlines the scope of this report. Section 2 describes the approaches we are using for non-safety transient models. It describes the need for non-safety transient analysis and the model characteristics needed to support those analyses. Section 3 presents the RELAP5 model. This is the highest-fidelity model used for benchmark evaluations. However, it is prohibitively slow for routine evaluations and additional lower-fidelity models have been developed. Section 4 discusses the current Matlab/Simulink model. This is a low-fidelity, high-speed model used to quickly evaluate and compare competing control and protection concepts. Section 5 describes the Modelica models developed by POLIMI and Westinghouse. The object-oriented Modelica language provides convenient mechanisms for developing models at several levels of detail. We have used this to develop a high-fidelity model for detailed analyses and a faster-running simplified model to help speed the I and C development process. Section

ZZ ENDL82, Evaluated Charged Particle, Neutron, Photon Cross-Section Library

International Nuclear Information System (INIS)

2001-01-01

Description of program or function: - Format: Described in the manual; - Number of groups: (energies between 100 eV and 100 MeV); - Nuclides: 94 (Z 1 to 99); - Origin: LLNL Evaluated Nuclear Data Library. ENDL82 is a collection of evaluated data for neutron-induced reactions, photon interactions with matter, and charged-particle-induced reactions. It is maintained in a computer-oriented system. All interpolable quantities for neutron-induced reactions are presented so that linear interpolation between successive entries yields values that are consistent with stated experimental errors, where experiments exist, or that adhere to an assumed law, such as 1/v energy dependence, within a small fraction (typically 1%). In the case of an assumed energy-dependence law for cross sections, this is accomplished by creating a large number of (energy, cross section) pairs by computer and subsequently thinning the points to a specified accuracy, using the subroutine THINER. All angular distributions are differential probabilities normalized to an integral of unity over the cosine of the scattering angle. All energy distributions of secondary particles are presented as normalized Legendre polynomial representations. The linear interpolation will construct an acceptable angular distribution at an intermediate energy

New computing systems, future computing environment, and their implications on structural analysis and design

Science.gov (United States)

Noor, Ahmed K.; Housner, Jerrold M.

1993-01-01

Recent advances in computer technology that are likely to impact structural analysis and design of flight vehicles are reviewed. A brief summary is given of the advances in microelectronics, networking technologies, and in the user-interface hardware and software. The major features of new and projected computing systems, including high performance computers, parallel processing machines, and small systems, are described. Advances in programming environments, numerical algorithms, and computational strategies for new computing systems are reviewed. The impact of the advances in computer technology on structural analysis and the design of flight vehicles is described. A scenario for future computing paradigms is presented, and the near-term needs in the computational structures area are outlined.

Correction for polychromatic aberration in computed tomography images

International Nuclear Information System (INIS)

Naparstek, A.

1979-01-01

A method and apparatus for correcting a computed tomography image for polychromatic aberration caused by the non-linear interaction (i.e. the energy dependent attenuation characteristics) of different body constituents, such as bone and soft tissue, with a polychromatic X-ray beam are described in detail. An initial image is conventionally computed from path measurements made as source and detector assembly scan a body section. In the improvement, each image element of the initial computed image representing attenuation is recorded in a store and is compared with two thresholds, one representing bone and the other soft tissue. Depending on the element value relative to the thresholds, a proportion of the respective constituent is allocated to that element location and corresponding bone and soft tissue projections are determined and stored. An error projection generator calculates projections of polychromatic aberration errors in the raw image data from recalled bone and tissue projections using a multidimensional polynomial function which approximates the non-linear interaction involved. After filtering, these are supplied to an image reconstruction computer to compute image element correction values which are subtracted from raw image element values to provide a corrected reconstructed image for display. (author)

6th International Workshop Soft Computing Applications

CERN Document Server

Jain, Lakhmi; Kovačević, Branko

2016-01-01

These volumes constitute the Proceedings of the 6th International Workshop on Soft Computing Applications, or SOFA 2014, held on 24-26 July 2014 in Timisoara, Romania. This edition was organized by the University of Belgrade, Serbia in conjunction with Romanian Society of Control Engineering and Technical Informatics (SRAIT) - Arad Section, The General Association of Engineers in Romania - Arad Section, Institute of Computer Science, Iasi Branch of the Romanian Academy and IEEE Romanian Section.                 The Soft Computing concept was introduced by Lotfi Zadeh in 1991 and serves to highlight the emergence of computing methodologies in which the accent is on exploiting the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solution cost. Soft computing facilitates the use of fuzzy logic, neurocomputing, evolutionary computing and probabilistic computing in combination, leading to the concept of hybrid intelligent systems.        The combination of ...

Activity-Driven Computing Infrastructure - Pervasive Computing in Healthcare

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Olesen, Anders Konring

In many work settings, and especially in healthcare, work is distributed among many cooperating actors, who are constantly moving around and are frequently interrupted. In line with other researchers, we use the term pervasive computing to describe a computing infrastructure that supports work...

Computed tomographic evaluation of comminuted middle phalangeal fractures in the horse

International Nuclear Information System (INIS)

Rose, P.L.; Seeherman, H.; O'Callaghan, M.

1997-01-01

Comminuted fractures of the middle phalanx have been well described in the horse. Choice of treatment, surgical planning and prognosis have traditionally been based upon evaluation of radiographs. However, the complex nature of comminuted fractures makes radiographic interpretation difficult. Computed tomography (CT) allows the production of cross-sectional images with spatial separation of structures which are superimposed on survey radiographs. This allows accurate assessment of the number and direction of fracture lines within the bone. In this paper we report the use of CT in the evaluation of 6 comminuted middle phalangeal fractures. Computed tomography is potentially useful in deciding the type of treatment, surgical planning and determining the prognosis

Symbiotic Cognitive Computing

OpenAIRE

Farrell, Robert G.; Lenchner, Jonathan; Kephjart, Jeffrey O.; Webb, Alan M.; Muller, MIchael J.; Erikson, Thomas D.; Melville, David O.; Bellamy, Rachel K.E.; Gruen, Daniel M.; Connell, Jonathan H.; Soroker, Danny; Aaron, Andy; Trewin, Shari M.; Ashoori, Maryam; Ellis, Jason B.

2016-01-01

IBM Research is engaged in a research program in symbiotic cognitive computing to investigate how to embed cognitive computing in physical spaces. This article proposes 5 key principles of symbiotic cognitive computing.  We describe how these principles are applied in a particular symbiotic cognitive computing environment and in an illustrative application.  

Parallel computations

CERN Document Server

1982-01-01

Parallel Computations focuses on parallel computation, with emphasis on algorithms used in a variety of numerical and physical applications and for many different types of parallel computers. Topics covered range from vectorization of fast Fourier transforms (FFTs) and of the incomplete Cholesky conjugate gradient (ICCG) algorithm on the Cray-1 to calculation of table lookups and piecewise functions. Single tridiagonal linear systems and vectorized computation of reactive flow are also discussed.Comprised of 13 chapters, this volume begins by classifying parallel computers and describing techn

Further computer appreciation

CERN Document Server

Fry, T F

2014-01-01

Further Computer Appreciation is a comprehensive cover of the principles and aspects in computer appreciation. The book starts by describing the development of computers from the first to the third computer generations, to the development of processors and storage systems, up to the present position of computers and future trends. The text tackles the basic elements, concepts and functions of digital computers, computer arithmetic, input media and devices, and computer output. The basic central processor functions, data storage and the organization of data by classification of computer files,

Influence of the ab initio n–d cross sections in the critical heavy-water benchmarks

International Nuclear Information System (INIS)

Morillon, B.; Lazauskas, R.; Carbonell, J.

2013-01-01

Highlights: ► We solve the three nucleon problem using different NN potential (MT, AV18 and INOY) to calculate the Neutron–deuteron cross sections. ► These cross sections are compared to the existing experimental data and to international libraries. ► We describe the different sets of heavy water benchmarks for which the Monte Carlo simulations have been performed including our new Neutron–deuteron cross sections. ► The results obtained by the ab initio INOY potential have been compared with the calculations based on the international library cross sections and are found to be of the same quality. - Abstract: The n–d elastic and breakup cross sections are computed by solving the three-body Faddeev equations for realistic and semi-realistic nucleon–nucleon potentials. These cross sections are inserted in the Monte Carlo simulation of the nuclear processes considered in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook). The results obtained using thes ab initio n–d cross sections are compared with those provided by the most renown international libraries

Parametric equations for calculation of macroscopic cross sections

International Nuclear Information System (INIS)

Botelho, Mario Hugo; Carvalho, Fernando

2015-01-01

Neutronic calculations of the core of a nuclear reactor is one thing necessary and important for the design and management of a nuclear reactor in order to prevent accidents and control the reactor efficiently as possible. To perform these calculations a library of nuclear data, including cross sections is required. Currently, to obtain a cross section computer codes are used, which require a large amount of processing time and computer memory. This paper proposes the calculation of macroscopic cross section through the development of parametric equations. The paper illustrates the proposal for the case of macroscopic cross sections of absorption (Σa), which was chosen due to its greater complexity among other cross sections. Parametric equations created enable, quick and dynamic way, the determination of absorption cross sections, enabling the use of them in calculations of reactors. The results show efficient when compared with the absorption cross sections obtained by the ALPHA 8.8.1 code. The differences between the cross sections are less than 2% for group 2 and less than 0.60% for group 1. (author)

COMPUTATIONAL TOXICOLOGY-WHERE IS THE DATA? ...

Science.gov (United States)

This talk will briefly describe the state of the data world for computational toxicology and one approach to improve the situation, called ACToR (Aggregated Computational Toxicology Resource). This talk will briefly describe the state of the data world for computational toxicology and one approach to improve the situation, called ACToR (Aggregated Computational Toxicology Resource).

Consistency of neutron cross-section data, S /SUB N/ calculations, and measured tritium production for a 14-MeV neutron-driven sphere of natural lithium deuteride

International Nuclear Information System (INIS)

Reupke, W.A.; Davidson, J.N.; Muir, D.W.

1982-01-01

The authors present algorithms, describe a computer program, and gives a computational procedure for the statistical consistency analysis of neutron cross-section data, S /SUB N/ calculations, and measured tritium production in 14-MeV neutron-driven integral assemblies. Algorithms presented include a reduced matrix manipulation technique suitable for manygroup, 14-MeV neutron transport calculations. The computer program incorporates these algorithms and is expanded and improved to facilitate analysis of such integral experiments. Details of the computational procedure are given for a natural lithium deuteride experiment performed at the Los Alamos National Laboratory. Results are explained in terms of calculated cross-section sensitivities and uncertainty estimates. They include a downward adjustment of the 7 Li(n,xt) 14-MeV cross section from 328 + or - 22 to 284 + or - 24 mb, which is supported by the trend of recent differential and integral measurements. It is concluded that with appropriate refinements, the techniques of consistency analysis can be usefully applied to the analysis of 14-MeV neutron-driven tritium production integral experiments

Program PLOTC4 (Version 86-1). Plot evaluated data from the ENDF/B format and/or experimental data which is in a computation format

International Nuclear Information System (INIS)

Cullen, D.E.

1986-09-01

Experimental and evaluated nuclear reaction data are world-wide compiled in EXFOR format and ENDF format, respectively. The computer program PLOTC4 described in the present document plots data from both formats; EXFOR data must be converted first to a ''computation format''. The program is available costfree from the IAEA Nuclear Data Section, upon request. (author)

Computer-associated health complaints and sources of ergonomic instructions in computer-related issues among Finnish adolescents: A cross-sectional study

Science.gov (United States)

2010-01-01

Background The use of computers has increased among adolescents, as have musculoskeletal symptoms. There is evidence that these symptoms can be reduced through an ergonomics approach and through education. The purpose of this study was to examine where adolescents had received ergonomic instructions related to computer use, and whether receiving these instructions was associated with a reduced prevalence of computer-associated health complaints. Methods Mailed survey with nationally representative sample of 12 to 18-year-old Finns in 2001 (n = 7292, response rate 70%). In total, 6961 youths reported using a computer. We tested the associations of computer use time and received ergonomic instructions (predictor variables) with computer-associated health complaints (outcome variables) using logistic regression analysis. Results To prevent computer-associated complaints, 61.2% reported having been instructed to arrange their desk/chair/screen in the right position, 71.5% to take rest breaks. The older age group (16-18 years) reported receiving instructions or being self-instructed more often than the 12- to 14-year-olds (p ergonomic instructions on how to prevent computer-related musculoskeletal problems fail to reach a substantial number of children. Furthermore, the reported sources of instructions vary greatly in terms of reliability. PMID:20064250

Study guide to accompany computers data and processing

CERN Document Server

Deitel, Harvey M

1985-01-01

Study Guide to Accompany Computer and Data Processing provides information pertinent to the fundamental aspects of computers and computer technology. This book presents the key benefits of using computers.Organized into five parts encompassing 19 chapters, this book begins with an overview of the evolution of modern computing systems from the earliest mechanical calculating devices to microchips. This text then introduces computer hardware and describes the processor. Other chapters describe how microprocessors are made and describe the physical operation of computers. This book discusses as w

Automating the Analytical Laboratories Section, Lewis Research Center, National Aeronautics and Space Administration: a feasibility study

International Nuclear Information System (INIS)

Boyle, W.G.; Barton, G.W.

1979-01-01

We studied the feasibility of computerized automation of the Analytical Laboratories Section at NASA's Lewis Research Center. Since that laboratory's duties are not routine, we set our automation goals with that in mind. We selected four instruments as the most likely automation candidates: an atomic absorption spectrophotometer, an emission spectrometer, an x-ray fluorescence spectrometer, and an x-ray diffraction unit. Our study describes two options for computer automation: a time-shared central computer and a system with microcomputers for each instrument connected to a central computer. A third option, presented for future planning, expands the microcomputer version. We determine costs and benefits for each option. We conclude that the microcomputer version best fits the goals and duties of the laboratory and that such an automated system is needed to meet the laboratory's future requirements

Measurements of neutron capture cross sections

International Nuclear Information System (INIS)

Nakajima, Yutaka

1984-01-01

A review of measurement techniques for the neutron capture cross sections is presented. Sell transmission method, activation method, and prompt gamma-ray detection method are described using examples of capture cross section measurements. The capture cross section of 238 U measured by three different prompt gamma-ray detection methods (large liquid scintillator, Moxon-Rae detector, and pulse height weighting method) are compared and their discrepancies are resolved. A method how to derive the covariance is described. (author)

26 CFR 1.167(c)-1 - Limitations on methods of computing depreciation under section 167(b) (2), (3), and (4).

Science.gov (United States)

2010-04-01

... use of the declining balance method described in section 167(b)(2), the sum of the years-digits method... applicable only to tangible property having a useful life of three years or more. If construction... as constructed, reconstructed, or erected by the taxpayer if the work is done for him in accordance...

Basic data, computer codes and integral experiments: The tools for modelling in nuclear technology

International Nuclear Information System (INIS)

Sartori, E.

2001-01-01

When studying applications in nuclear technology we need to understand and be able to predict the behavior of systems manufactured by human enterprise. First, the underlying basic physical and chemical phenomena need to be understood. We have then to predict the results from the interplay of the large number of the different basic events: i.e. the macroscopic effects. In order to be able to build confidence in our modelling capability, we need then to compare these results against measurements carried out on such systems. The different levels of modelling require the solution of different types of equations using different type of parameters. The tools required for carrying out a complete validated analysis are: - The basic nuclear or chemical data; - The computer codes, and; - The integral experiments. This article describes the role each component plays in a computational scheme designed for modelling purposes. It describes also which tools have been developed and are internationally available. The role of the OECD/NEA Data Bank, the Radiation Shielding Information Computational Center (RSICC), and the IAEA Nuclear Data Section are playing in making these elements available to the community of scientists and engineers is described. (author)

Adaptation of HAMMER computer code to CYBER 170/750 computer

International Nuclear Information System (INIS)

Pinheiro, A.M.B.S.; Nair, R.P.K.

1982-01-01

The adaptation of HAMMER computer code to CYBER 170/750 computer is presented. The HAMMER code calculates cell parameters by multigroup transport theory and reactor parameters by few group diffusion theory. The auxiliary programs, the carried out modifications and the use of HAMMER system adapted to CYBER 170/750 computer are described. (M.C.K.) [pt

Mapping the Most Significant Computer Hacking Events to a Temporal Computer Attack Model

OpenAIRE

Heerden , Renier ,; Pieterse , Heloise; Irwin , Barry

2012-01-01

Part 4: Section 3: ICT for Peace and War; International audience; This paper presents eight of the most significant computer hacking events (also known as computer attacks). These events were selected because of their unique impact, methodology, or other properties. A temporal computer attack model is presented that can be used to model computer based attacks. This model consists of the following stages: Target Identification, Reconnaissance, Attack, and Post-Attack Reconnaissance stages. The...

Reversible computing fundamentals, quantum computing, and applications

CERN Document Server

De Vos, Alexis

2010-01-01

Written by one of the few top internationally recognized experts in the field, this book concentrates on those topics that will remain fundamental, such as low power computing, reversible programming languages, and applications in thermodynamics. It describes reversible computing from various points of view: Boolean algebra, group theory, logic circuits, low-power electronics, communication, software, quantum computing. It is this multidisciplinary approach that makes it unique.Backed by numerous examples, this is useful for all levels of the scientific and academic community, from undergr

Construction of a 2- by 2-foot transonic adaptive-wall test section at the NASA Ames Research Center

Science.gov (United States)

Morgan, Daniel G.; Lee, George

1986-01-01

The development of a new production-size, two-dimensional, adaptive-wall test section with ventilated walls at the NASA Ames Research Center is described. The new facility incorporates rapid closed-loop operation, computer/sensor integration, and on-line interference assessment and wall corrections. Air flow through the test section is controlled by a series of plenum compartments and three-way slide vales. A fast-scan laser velocimeter was built to measure velocity boundary conditions for the interference assessment scheme. A 15.2-cm- (6.0-in.-) chord NACA 0012 airfoil model will be used in the first experiments during calibration of the facility.

Analysing the doctor_patient_computer relationship: the use of video data

Directory of Open Access Journals (Sweden)

Christopher Pearce

2006-12-01

Full Text Available This paper examines the utility of using digital video data in observational studies involving doctors' and patients' use of computers in the consultation. Previous observational studies have used either direct observations or analogue videotapes. We describe a method currently in use in a study examining how doctors, patients and computers interact in the consultation. The study is set in general practice as this is the most clinically computerised section of the Australian healthcare system. Computers are now used for clinical functions in 90% of doctors' surgeries. With this rapid rise of computerisation, concerns have been expressed as to how the computer will affect the doctor_patient relationship. To assess how doctors, patients and computers interact, we have chosen an observational technique, namely to make digital videotapes of actual consultations. This analysis is based on a theoretical framework derived from dramaturgical analysis. Data are gathered from general practitioners who are high-level users of computers, as defined by their use of progress notes, as well as prescribing and test ordering. The subsequent digital data is then transferred onto computer and analysed according to our conceptual framework, making use of video-tagging software.

Improvement of measurements, theoretical computations and evaluations of neutron induced helium production cross sections. Summary report on the third and final research co-ordination meeting

International Nuclear Information System (INIS)

Pashchenko, A.B.

1996-09-01

The present report contains the Summary of the Third and Final IAEA Research Co-ordination Meeting (RCM) on ''Improvement of Measurements, Theoretical Computations and Evaluations of Neutron Induced Helium Production Cross Sections'' which was hosted by the Tohoku University and held in Sendai, Japan, from 25 to 29 September 1995. This RCM was organized by the IAEA Nuclear Data Section (NDS), with the co-operation and assistance of local organizers from Tohoku University. Summarized are the proceedings and results of the meeting. The List of Participants and meeting Agenda are included. (author)

Concrete resource analysis of the quantum linear-system algorithm used to compute the electromagnetic scattering cross section of a 2D target

Science.gov (United States)

Scherer, Artur; Valiron, Benoît; Mau, Siun-Chuon; Alexander, Scott; van den Berg, Eric; Chapuran, Thomas E.

2017-03-01

We provide a detailed estimate for the logical resource requirements of the quantum linear-system algorithm (Harrow et al. in Phys Rev Lett 103:150502, 2009) including the recently described elaborations and application to computing the electromagnetic scattering cross section of a metallic target (Clader et al. in Phys Rev Lett 110:250504, 2013). Our resource estimates are based on the standard quantum-circuit model of quantum computation; they comprise circuit width (related to parallelism), circuit depth (total number of steps), the number of qubits and ancilla qubits employed, and the overall number of elementary quantum gate operations as well as more specific gate counts for each elementary fault-tolerant gate from the standard set { X, Y, Z, H, S, T, { CNOT } }. In order to perform these estimates, we used an approach that combines manual analysis with automated estimates generated via the Quipper quantum programming language and compiler. Our estimates pertain to the explicit example problem size N=332{,}020{,}680 beyond which, according to a crude big-O complexity comparison, the quantum linear-system algorithm is expected to run faster than the best known classical linear-system solving algorithm. For this problem size, a desired calculation accuracy ɛ =0.01 requires an approximate circuit width 340 and circuit depth of order 10^{25} if oracle costs are excluded, and a circuit width and circuit depth of order 10^8 and 10^{29}, respectively, if the resource requirements of oracles are included, indicating that the commonly ignored oracle resources are considerable. In addition to providing detailed logical resource estimates, it is also the purpose of this paper to demonstrate explicitly (using a fine-grained approach rather than relying on coarse big-O asymptotic approximations) how these impressively large numbers arise with an actual circuit implementation of a quantum algorithm. While our estimates may prove to be conservative as more efficient

Differences in prevalence of self-reported musculoskeletal symptoms among computer and non-computer users in a Nigerian population: a cross-sectional study

Directory of Open Access Journals (Sweden)

Ayanniyi O

2010-08-01

Full Text Available Abstract Background Literature abounds on the prevalent nature of Self Reported Musculoskeletal Symptoms (SRMS among computer users, but studies that actually compared this with non computer users are meagre thereby reducing the strength of the evidence. This study compared the prevalence of SRMS between computer and non computer users and assessed the risk factors associated with SRMS. Methods A total of 472 participants comprising equal numbers of age and sex matched computer and non computer users were assessed for the presence of SRMS. Information concerning musculoskeletal symptoms and discomforts from the neck, shoulders, upper back, elbows, wrists/hands, low back, hips/thighs, knees and ankles/feet were obtained using the Standardized Nordic questionnaire. Results The prevalence of SRMS was significantly higher in the computer users than the non computer users both over the past 7 days (χ2 = 39.11, p = 0.001 and during the past 12 month durations (χ2 = 53.56, p = 0.001. The odds of reporting musculoskeletal symptoms was least for participants above the age of 40 years (OR = 0.42, 95% CI = 0.31-0.64 over the past 7 days and OR = 0.61; 95% CI = 0.47-0.77 during the past 12 months and also reduced in female participants. Increasing daily hours and accumulated years of computer use and tasks of data processing and designs/graphics significantly (p Conclusion The prevalence of SRMS was significantly higher in the computer users than the non computer users and younger age, being male, working longer hours daily, increasing years of computer use, data entry tasks and computer designs/graphics were the significant risk factors for reporting musculoskeletal symptoms among the computer users. Computer use may explain the increase in prevalence of SRMS among the computer users.

Capability-based computer systems

CERN Document Server

Levy, Henry M

2014-01-01

Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

3rd International Conference on Computational Mathematics and Computational Geometry

CERN Document Server

Ravindran, Anton

2016-01-01

This volume presents original research contributed to the 3rd Annual International Conference on Computational Mathematics and Computational Geometry (CMCGS 2014), organized and administered by Global Science and Technology Forum (GSTF). Computational Mathematics and Computational Geometry are closely related subjects, but are often studied by separate communities and published in different venues. This volume is unique in its combination of these topics. After the conference, which took place in Singapore, selected contributions chosen for this volume and peer-reviewed. The section on Computational Mathematics contains papers that are concerned with developing new and efficient numerical algorithms for mathematical sciences or scientific computing. They also cover analysis of such algorithms to assess accuracy and reliability. The parts of this project that are related to Computational Geometry aim to develop effective and efficient algorithms for geometrical applications such as representation and computati...

15 CFR 930.98 - Federally assisted activities outside of the coastal zone or the described geographic area.

Science.gov (United States)

2010-01-01

... of the coastal zone or the described geographic area. 930.98 Section 930.98 Commerce and Foreign... Federally assisted activities outside of the coastal zone or the described geographic area. State agencies should monitor proposed federal assistance activities outside of the coastal zone or the described...

Activity report of Computing Research Center

Energy Technology Data Exchange (ETDEWEB)

1997-07-01

On April 1997, National Laboratory for High Energy Physics (KEK), Institute of Nuclear Study, University of Tokyo (INS), and Meson Science Laboratory, Faculty of Science, University of Tokyo began to work newly as High Energy Accelerator Research Organization after reconstructing and converting their systems, under aiming at further development of a wide field of accelerator science using a high energy accelerator. In this Research Organization, Applied Research Laboratory is composed of four Centers to execute assistance of research actions common to one of the Research Organization and their relating research and development (R and D) by integrating the present four centers and their relating sections in Tanashi. What is expected for the assistance of research actions is not only its general assistance but also its preparation and R and D of a system required for promotion and future plan of the research. Computer technology is essential to development of the research and can communize for various researches in the Research Organization. On response to such expectation, new Computing Research Center is required for promoting its duty by coworking and cooperating with every researchers at a range from R and D on data analysis of various experiments to computation physics acting under driving powerful computer capacity such as supercomputer and so forth. Here were described on report of works and present state of Data Processing Center of KEK at the first chapter and of the computer room of INS at the second chapter and on future problems for the Computing Research Center. (G.K.)

Browsing software of the Visible Korean data used for teaching sectional anatomy.

Science.gov (United States)

Shin, Dong Sun; Chung, Min Suk; Park, Hyo Seok; Park, Jin Seo; Hwang, Sung Bae

2011-01-01

The interpretation of computed tomographs (CTs) and magnetic resonance images (MRIs) to diagnose clinical conditions requires basic knowledge of sectional anatomy. Sectional anatomy has traditionally been taught using sectioned cadavers, atlases, and/or computer software. The computer software commonly used for this subject is practical and efficient for students but could be more advanced. The objective of this research was to present browsing software developed from the Visible Korean images that can be used for teaching sectional anatomy. One thousand seven hundred and two sets of MRIs, CTs, and sectioned images (intervals, one millimeter) of a whole male cadaver were prepared. Over 900 structures in the sectioned images were outlined and then filled with different colors to elaborate each structure. Software was developed where four corresponding images could be displayed simultaneously; in addition, the structures in the image data could be readily recognized with the aid of the color-filled outlines. The software, distributed free of charge, could be a valuable tool to teach medical students. For example, sectional anatomy could be taught by showing the sectioned images with real color and high resolution. Students could then review the lecture by using the sectioned and color-filled images on their own computers. Students could also be evaluated using the same software. Furthermore, other investigators would be able to replace the images for more comprehensive sectional anatomy. Copyright © 2011 Wiley-Liss, Inc.

MINX, Multigroup Cross-Sections and Self-Shielding Factors from ENDF/B for Program SPHINX

International Nuclear Information System (INIS)

Soran, P.D.; MacFarlane, R.E.; Harris, D.R.; LaBauve, R.J.; Hendricks, J.S.; Kidman, R.B.; Weisbin, C.R.; White, J.E.

1977-01-01

reaction cross section of interest and the gross spectral shape. The integration scheme actually employed in MINX is adaptive Simpson's procedure for which the initial estimate is based on the unionized grid described above. The computation of elastic and discrete group- to-group matrices is based upon a semi-analytic scheme which treats the rapidly fluctuating cross-section behaviour analytically. Where this laboratory-system-based scheme becomes difficult to implement (e.g., light nuclei, inelastic thresholds), an alternative numerical integration in the center-of mass system is employed. Multigroup transfer matrices for processes in which the outgoing neutron energy and angular distribution is uncoupled are computed by direct numerical integration. 3 - Restrictions on the complexity of the problem: The principal restriction is the computing time available for a given desired accuracy, number of groups, and Legendre order. The paging technique and variable dimensioning make efficient use of available core storage; very large problems have been run with MINX (e.g. a complete 171-group P3 neutron library at ORNL and an extensive 240-group P4 library at LASL)

Three new species of Carychium O.F. Müller, 1773 from the Southeastern USA, Belize and Panama are described using computer tomography (CT) (Eupulmonata, Ellobioidea, Carychiidae).

Science.gov (United States)

Jochum, Adrienne; Weigand, Alexander M; Bochud, Estee; Inäbnit, Thomas; Dörge, Dorian D; Ruthensteiner, Bernhard; Favre, Adrien; Martels, Gunhild; Kampschulte, Marian

2017-01-01

Three new species of the genus Carychium O.F. Müller, 1773, Carychium hardiei Jochum & Weigand, sp. n. , Carychium belizeense Jochum & Weigand, sp. n. and Carychium zarzaae Jochum & Weigand, sp. n. are described from the Southeastern United States, Belize and Panama, respectively. In two consecutive molecular phylogenetic studies of worldwide members of Carychiidae, the North and Central American morphospecies Carychium mexicanum Pilsbry, 1891 and Carychium costaricanum E. von Martens, 1898 were found to consist of several evolutionary lineages. Although the related lineages were found to be molecularly distinct from the two nominal species, the consequential morphological and taxonomic assessment of these lineages is still lacking. In the present paper, the shells of these uncovered Carychium lineages are assessed by comparing them with those of related species, using computer tomography for the first time for this genus. The interior diagnostic characters are emphasized, such as columellar configuration in conjunction with the columellar lamella and their relationship in context of the entire shell. These taxa are morphologically described and formally assigned their own names.

Three new species of Carychium O.F. Müller, 1773 from the Southeastern USA, Belize and Panama are described using computer tomography (CT (Eupulmonata, Ellobioidea, Carychiidae

Directory of Open Access Journals (Sweden)

Adrienne Jochum

2017-05-01

Full Text Available Three new species of the genus Carychium O.F. Müller, 1773, Carychium hardiei Jochum & Weigand, sp. n., Carychium belizeense Jochum & Weigand, sp. n. and Carychium zarzaae Jochum & Weigand, sp. n. are described from the Southeastern United States, Belize and Panama, respectively. In two consecutive molecular phylogenetic studies of worldwide members of Carychiidae, the North and Central American morphospecies Carychium mexicanum Pilsbry, 1891 and Carychium costaricanum E. von Martens, 1898 were found to consist of several evolutionary lineages. Although the related lineages were found to be molecularly distinct from the two nominal species, the consequential morphological and taxonomic assessment of these lineages is still lacking. In the present paper, the shells of these uncovered Carychium lineages are assessed by comparing them with those of related species, using computer tomography for the first time for this genus. The interior diagnostic characters are emphasized, such as columellar configuration in conjunction with the columellar lamella and their relationship in context of the entire shell. These taxa are morphologically described and formally assigned their own names.

Mission: Define Computer Literacy. The Illinois-Wisconsin ISACS Computer Coordinators' Committee on Computer Literacy Report (May 1985).

Science.gov (United States)

Computing Teacher, 1985

1985-01-01

Defines computer literacy and describes a computer literacy course which stresses ethics, hardware, and disk operating systems throughout. Core units on keyboarding, word processing, graphics, database management, problem solving, algorithmic thinking, and programing are outlined, together with additional units on spreadsheets, simulations,…

A subtraction scheme for computing QCD jet cross sections at NNLO. Integrating the iterated singly-unresolved subtraction terms

Energy Technology Data Exchange (ETDEWEB)

Bolzoni, Paolo [Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik; Somogyi, Gabor [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Trocsanyi, Zoltan [Debrecen Univ. (Hungary); Hungarian Academy of Sciences, Debrecen (Hungary). Inst. of Nuclear Research

2010-11-15

We perform the integration of all iterated singly-unresolved subtraction terms over the two-particle factorized phase space. We also sum over the unresolved parton flavours. The final result can be written as a convolution (in colour space) of the Born cross section and an insertion operator. We spell out the insertion operator in terms of 24 basic integrals that are defined explicitly. We compute the coefficients of the Laurent-expansion of these integrals in two different ways, with the method of Mellin-Barnes representations and sector decomposition. Finally, we present the Laurentexpansion of the full insertion operator for the specific examples of electron-positron annihilation into two and three jets. (orig.)

A subtraction scheme for computing QCD jet cross sections at NNLO: integrating the iterated singly-unresolved subtraction terms

Science.gov (United States)

Bolzoni, Paolo; Somogyi, Gábor; Trócsányi, Zoltán

2011-01-01

We perform the integration of all iterated singly-unresolved subtraction terms, as defined in ref. [1], over the two-particle factorized phase space. We also sum over the unresolved parton flavours. The final result can be written as a convolution (in colour space) of the Born cross section and an insertion operator. We spell out the insertion operator in terms of 24 basic integrals that are defined explicitly. We compute the coefficients of the Laurent expansion of these integrals in two different ways, with the method of Mellin-Barnes representations and sector decomposition. Finally, we present the Laurent-expansion of the full insertion operator for the specific examples of electron-positron annihilation into two and three jets.

Gender and Computers: Two Surveys of Computer-Related Attitudes.

Science.gov (United States)

Wilder, Gita; And Others

1985-01-01

Describes two surveys used to (1) determine sex differences in attitudes toward computers and video games among schoolchildren and the relationship of these attitudes to attitudes about science, math, and writing; and (2) sex differences in attitudes toward computing among a select group of highly motivated college freshmen. (SA)

Mathematical methods and the computer in oil and gas geology. Matematicheskiye metody i EVM v neftegazovoy geologii

Energy Technology Data Exchange (ETDEWEB)

Dement' yev, L.F.

1983-01-01

Fundamental questions are presented for mathematical modeling in geology. Tasks are examined for describing and grouping geological objects, separating and correlating the sections, analyzing interrelationships between the signs and spatial laws governing their change, organization of collection of automated processing of geological information. Fundamental attention is focused on methodology of using mathematical methods and computers.

Computational biomechanics

International Nuclear Information System (INIS)

Ethier, C.R.

2004-01-01

Computational biomechanics is a fast-growing field that integrates modern biological techniques and computer modelling to solve problems of medical and biological interest. Modelling of blood flow in the large arteries is the best-known application of computational biomechanics, but there are many others. Described here is work being carried out in the laboratory on the modelling of blood flow in the coronary arteries and on the transport of viral particles in the eye. (author)

Computed tomography

International Nuclear Information System (INIS)

Wells, P.; Davis, J.; Morgan, M.

1994-01-01

X-ray or gamma-ray transmission computed tomography (CT) is a powerful non-destructive evaluation (NDE) technique that produces two-dimensional cross-sectional images of an object without the need to physically section it. CT is also known by the acronym CAT, for computerised axial tomography. This review article presents a brief historical perspective on CT, its current status and the underlying physics. The mathematical fundamentals of computed tomography are developed for the simplest transmission CT modality. A description of CT scanner instrumentation is provided with an emphasis on radiation sources and systems. Examples of CT images are shown indicating the range of materials that can be scanned and the spatial and contrast resolutions that may be achieved. Attention is also given to the occurrence, interpretation and minimisation of various image artefacts that may arise. A final brief section is devoted to the principles and potential of a range of more recently developed tomographic modalities including diffraction CT, positron emission CT and seismic tomography. 57 refs., 2 tabs., 14 figs

Jet inclusive cross sections

International Nuclear Information System (INIS)

Del Duca, V.

1992-11-01

Minijet production in jet inclusive cross sections at hadron colliders, with large rapidity intervals between the tagged jets, is evaluated by using the BFKL pomeron. We describe the jet inclusive cross section for an arbitrary number of tagged jets, and show that it behaves like a system of coupled pomerons

Report of the IAEA Nuclear Data Section to the International Nuclear Data Committee for the period 1995/1996

Energy Technology Data Exchange (ETDEWEB)

Oblozinsky, P

1997-07-01

This progress report describes the activities of the IAEA Nuclear Data Section in the years 1995 and 1996, including staff and budget, the operation of the Nuclear Data Center, the computer operations, the coordination activities of the Nuclear Data Center Networks, the nuclear data improvements projects, Technical Cooperation and technology transfer, atomic and molecular data activities, and the meetings held in the reporting period. (author). 3 figs, 10 tabs.

Report of the IAEA Nuclear Data Section to the International Nuclear Data Committee for the period 1995/1996

International Nuclear Information System (INIS)

Oblozinsky, P.

1997-07-01

This progress report describes the activities of the IAEA Nuclear Data Section in the years 1995 and 1996, including staff and budget, the operation of the Nuclear Data Center, the computer operations, the coordination activities of the Nuclear Data Center Networks, the nuclear data improvements projects, Technical Cooperation and technology transfer, atomic and molecular data activities, and the meetings held in the reporting period. (author). 3 figs, 10 tabs

Cloud Computing Quality

Directory of Open Access Journals (Sweden)

Anamaria Şiclovan

2013-02-01

Full Text Available Cloud computing was and it will be a new way of providing Internet services and computers. This calculation approach is based on many existing services, such as the Internet, grid computing, Web services. Cloud computing as a system aims to provide on demand services more acceptable as price and infrastructure. It is exactly the transition from computer to a service offered to the consumers as a product delivered online. This paper is meant to describe the quality of cloud computing services, analyzing the advantages and characteristics offered by it. It is a theoretical paper.Keywords: Cloud computing, QoS, quality of cloud computing

Computer games addiction

OpenAIRE

Nejepínský, Adam

2010-01-01

This bachelor thesis deals with the problem of computer games addiction. The attention is paid mainly to on-line games for more players. The purpose of this thesis was to describe this problem and to check - through questionnaire investigation - if the addiction to computer games and the impacts connected with the games really deserve excessive experts and laics attention. The thesis has two parts -- theoretical and practical ones. The theoretical part describes the possibilities of diagnosin...

Computing for Belle

CERN Multimedia

CERN. Geneva

2004-01-01

2s-1, 10 times as much as we obtain now. This presentation describes Belle's efficient computing operations, struggles to manage large amount of raw and physics data, and plans for Belle computing for Super KEKB/Belle.

NNLO jet cross sections by subtraction

International Nuclear Information System (INIS)

Somogyi, G.; Bolzoni, P.; Trocsanyi, Z.

2010-06-01

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of an earlier NNLO subtraction scheme over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state. (orig.)

NNLO jet cross sections by subtraction

Energy Technology Data Exchange (ETDEWEB)

Somogyi, G.; Bolzoni, P. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Trocsanyi, Z. [CERN, Geneva (Switzerland)

2010-06-15

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of an earlier NNLO subtraction scheme over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state. (orig.)

NNLO jet cross sections by subtraction

CERN Document Server

Somogyi, Gabor; Trocsanyi, Zoltan

2010-01-01

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of the NNLO subtraction scheme of [1-4], over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state.

High energy physics and cloud computing

International Nuclear Information System (INIS)

Cheng Yaodong; Liu Baoxu; Sun Gongxing; Chen Gang

2011-01-01

High Energy Physics (HEP) has been a strong promoter of computing technology, for example WWW (World Wide Web) and the grid computing. In the new era of cloud computing, HEP has still a strong demand, and major international high energy physics laboratories have launched a number of projects to research on cloud computing technologies and applications. It describes the current developments in cloud computing and its applications in high energy physics. Some ongoing projects in the institutes of high energy physics, Chinese Academy of Sciences, including cloud storage, virtual computing clusters, and BESⅢ elastic cloud, are also described briefly in the paper. (authors)

Three-section expiratory CT

DEFF Research Database (Denmark)

Loeve, Martine; de Bruijne, Marleen; Hartmann, Ieneke C. J.

2012-01-01

. Longitudinal follow-up was performed with three sections. All images were deidentified and randomized, and TA was scored with the Brody II system and a new quantitative system. Statistical analysis included the Wilcoxon signed rank test, calculation of Spearman and intraclass correlation coefficients, and use......Purpose: To estimate the effect of the number of computed tomography (CT) sections on trapped air (TA) assessment in patients with cystic fibrosis (CF) by using an established scoring system and a new quantitative scoring system and to compare CT and pulmonary function test (PFT) estimates of TA...

USERDA computer program summaries. Numbers 177--239

International Nuclear Information System (INIS)

1975-10-01

Since 1960 the Argonne Code Center has served as a U. S. Atomic Energy Commission information center for computer programs developed and used primarily for the solution of problems in nuclear physics, reactor design, reactor engineering and operation. The Center, through a network of registered installations, collects, validates, maintains, and distributes a library of these computer programs and publishes a compilation of abstracts describing them. In 1972 the scope of the Center's activities was officially expanded to include computer programs developed in all of the U. S. Atomic Energy Commission program areas and the compilation and publication of this report. The Computer Program Summary report contains summaries of computer programs at the specification stage, under development, being checked out, in use, or available at ERDA offices, laboratories, and contractor installations. Programs are divided into the following categories: cross section and resonance integral calculations; spectrum calculations, generation of group constants, lattice and cell problems; static design studies; depletion, fuel management, cost analysis, and reactor economics; space-independent kinetics; space--time kinetics, coupled neutronics--hydrodynamics--thermodynamics and excursion simulations; radiological safety, hazard and accident analysis; heat transfer and fluid flow; deformation and stress distribution computations, structural analysis and engineering design studies; gamma heating and shield design programs; reactor systems analysis; data preparation; data management; subsidiary calculations; experimental data processing; general mathematical and computing system routines; materials; environmental and earth sciences; space sciences; electronics and engineering equipment; chemistry; particle accelerators and high-voltage machines; physics; controlled thermonuclear research; biology and medicine; and data

Development of an X-ray Computed Tomography System for Non-Invasive Imaging of Industrial Materials

International Nuclear Information System (INIS)

Abdullah, J.; Sipaun, S. M.; Mustapha, I.; Zain, R. M.; Rahman, M. F. A.; Mustapha, M.; Shaari, M. R.; Hassan, H.; Said, M. K. M.; Mohamad, G. H. P.; Ibrahim, M. M.

2008-01-01

X-ray computed tomography is a powerful non-invasive imaging technique for viewing an object's inner structures in two-dimensional cross-section images without the need to physically section it. The invention of CT techniques revolutionised the field of medical diagnostic imaging because it provided more detailed and useful information than any previous non-invasive imaging techniques. The method is increasingly being used in industry, aerospace, geosciences and archaeology. This paper describes the development of an X-ray computed tomography system for imaging of industrial materials. The theoretical aspects of CT scanner, the system configurations and the adopted algorithm for image reconstruction are discussed. The penetrating rays from a 160 kV industrial X-ray machine were used to investigate structures that manifest in a manufactured component or product. Some results were presented in this paper

Program RESENDD (version 84-07): a program for reconstruction of resonance cross sections from evaluated nuclear data in the ENDF/B format

International Nuclear Information System (INIS)

Nakagawa, Tsuneo

1984-10-01

RESENDD is a computer program to calculate resonance cross sections from evaluated resonance parameters in the ENDF/B format. This program was improved from RESEND by modifying the multi-level Breit-Wigner formula, adding a function of Doppler broadening, and so on. This report explains functions of RESENDD and describes input data. Some examples are also given. (author)

New species in Aspergillus section Terrei

DEFF Research Database (Denmark)

Samson, R. A.; Peterson, S. W.; Frisvad, Jens Christian

2011-01-01

. clade including the type isolate of A. niveus (CBS 115.27) constitutes a lineage closely related to A. carneus. Fennellia nivea, the hypothesized teleomorph is not related to this clade. Aspergillus allahabadii, A. niveus var. indicus, and two species originally placed in section Versicolores, A......Section Terrei of Aspergillus was studied using a polyphasic approach including sequence analysis of parts of the beta-tubulin and calmodulin genes and the ITS region, macro- and micromorphological analyses and examination of extrolite profiles to describe three new species in this section. Based....... floccosus, A. terreus var. africanus, A. terreus var. aureus, while Aspergillus hortai is recognised at species level. Aspergillus terreus NRRL 4017 is described as the new species A. pseudoterreus. Also included in section Terrei are some species formerly placed in sections Flavipedes and Versicolores. A...

On techniques of ATR lattice computation

International Nuclear Information System (INIS)

1997-08-01

Lattice computation is to compute the average nuclear constants of unit fuel lattice which are required for computing core nuclear characteristics such as core power distribution and reactivity characteristics. The main nuclear constants are infinite multiplying rate, neutron movement area, cross section for diffusion computation, local power distribution and isotope composition. As for the lattice computation code, WIMS-ATR is used, which is based on the WIMS-D code developed in U.K., and for the purpose of heightening the accuracy of analysis, which was improved by adding heavy water scattering cross section considering the temperature dependence by Honeck model. For the computation of the neutron absorption by control rods, LOIEL BLUE code is used. The extrapolation distance of neutron flux on control rod surfaces is computed by using THERMOS and DTF codes, and the lattice constants of adjoining lattices are computed by using the WIMS-ATR code. As for the WIMS-ATR code, the computation flow and nuclear data library, and as for the LOIEL BLUE code, the computation flow are explained. The local power distribution in fuel assemblies determined by the WIMS-ATR code was verified with the measured data, and the results are reported. (K.I.)

CPU SIM: A Computer Simulator for Use in an Introductory Computer Organization-Architecture Class.

Science.gov (United States)

Skrein, Dale

1994-01-01

CPU SIM, an interactive low-level computer simulation package that runs on the Macintosh computer, is described. The program is designed for instructional use in the first or second year of undergraduate computer science, to teach various features of typical computer organization through hands-on exercises. (MSE)

Computer software summaries. Numbers 325 through 423

Energy Technology Data Exchange (ETDEWEB)

1978-08-01

The National Energy Software Center (NESC) serves as the software exchange and information center for the U.S. Department of Energy and the Nuclear Regulatory Commission. These summaries describe agency-sponsored software which is at the specification stage, under development, being checked out, in use, or available at agency offices, laboratories, and contractor installations. They describe software which is not included in the NESC library due to its preliminary status or because it is believed to be of limited interest. Codes dealing with the following subjects are included: cross section and resonance integral calculations; spectrum calculations, generation of group constants, lattice and cell problems; static design studies; depletion, fuel management, cost analysis, and power plant economics; space-independent kinetics; space--time kinetics, coupled neutronics--hydrodynamics--thermodynamics; and excursion simulations; radiological safety, hazard and accident analysis; heat transfer and fluid flow; deformation and stress distribution computations, structural analysis, and engineering design studies; gamma heating and shield design; reactor systems analysis; data preparation; data management; subsidiary calculations; experimental data processing; general mathematical and computing system routines; materials; environmental and earth sciences; space sciences; electronics and engineering equipment; chemistry; particle accelerators and high-voltage machines; physics; magnetic fusion research; biology and medicine; and data. (RWR)

Computer software summaries. Numbers 325 through 423

International Nuclear Information System (INIS)

1978-08-01

The National Energy Software Center (NESC) serves as the software exchange and information center for the U.S. Department of Energy and the Nuclear Regulatory Commission. These summaries describe agency-sponsored software which is at the specification stage, under development, being checked out, in use, or available at agency offices, laboratories, and contractor installations. They describe software which is not included in the NESC library due to its preliminary status or because it is believed to be of limited interest. Codes dealing with the following subjects are included: cross section and resonance integral calculations; spectrum calculations, generation of group constants, lattice and cell problems; static design studies; depletion, fuel management, cost analysis, and power plant economics; space-independent kinetics; space--time kinetics, coupled neutronics--hydrodynamics--thermodynamics; and excursion simulations; radiological safety, hazard and accident analysis; heat transfer and fluid flow; deformation and stress distribution computations, structural analysis, and engineering design studies; gamma heating and shield design; reactor systems analysis; data preparation; data management; subsidiary calculations; experimental data processing; general mathematical and computing system routines; materials; environmental and earth sciences; space sciences; electronics and engineering equipment; chemistry; particle accelerators and high-voltage machines; physics; magnetic fusion research; biology and medicine; and data

Large Scale Computing and Storage Requirements for High Energy Physics

International Nuclear Information System (INIS)

Gerber, Richard A.; Wasserman, Harvey

2010-01-01

The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility for the Department of Energy's Office of Science, providing high-performance computing (HPC) resources to more than 3,000 researchers working on about 400 projects. NERSC provides large-scale computing resources and, crucially, the support and expertise needed for scientists to make effective use of them. In November 2009, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR), and DOE's Office of High Energy Physics (HEP) held a workshop to characterize the HPC resources needed at NERSC to support HEP research through the next three to five years. The effort is part of NERSC's legacy of anticipating users needs and deploying resources to meet those demands. The workshop revealed several key points, in addition to achieving its goal of collecting and characterizing computing requirements. The chief findings: (1) Science teams need access to a significant increase in computational resources to meet their research goals; (2) Research teams need to be able to read, write, transfer, store online, archive, analyze, and share huge volumes of data; (3) Science teams need guidance and support to implement their codes on future architectures; and (4) Projects need predictable, rapid turnaround of their computational jobs to meet mission-critical time constraints. This report expands upon these key points and includes others. It also presents a number of case studies as representative of the research conducted within HEP. Workshop participants were asked to codify their requirements in this case study format, summarizing their science goals, methods of solution, current and three-to-five year computing requirements, and software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, multi-core environment that is expected to dominate HPC architectures over the next few years. The report includes

Belle computing system

International Nuclear Information System (INIS)

Adachi, Ichiro; Hibino, Taisuke; Hinz, Luc; Itoh, Ryosuke; Katayama, Nobu; Nishida, Shohei; Ronga, Frederic; Tsukamoto, Toshifumi; Yokoyama, Masahiko

2004-01-01

We describe the present status of the computing system in the Belle experiment at the KEKB e+e- asymmetric-energy collider. So far, we have logged more than 160fb-1 of data, corresponding to the world's largest data sample of 170M BB-bar pairs at the -bar (4S) energy region. A large amount of event data has to be processed to produce an analysis event sample in a timely fashion. In addition, Monte Carlo events have to be created to control systematic errors accurately. This requires stable and efficient usage of computing resources. Here, we review our computing model and then describe how we efficiently proceed DST/MC productions in our system

Image based Monte Carlo modeling for computational phantom

International Nuclear Information System (INIS)

Cheng, M.; Wang, W.; Zhao, K.; Fan, Y.; Long, P.; Wu, Y.

2013-01-01

Full text of the publication follows. The evaluation on the effects of ionizing radiation and the risk of radiation exposure on human body has been becoming one of the most important issues for radiation protection and radiotherapy fields, which is helpful to avoid unnecessary radiation and decrease harm to human body. In order to accurately evaluate the dose on human body, it is necessary to construct more realistic computational phantom. However, manual description and verification of the models for Monte Carlo (MC) simulation are very tedious, error-prone and time-consuming. In addition, it is difficult to locate and fix the geometry error, and difficult to describe material information and assign it to cells. MCAM (CAD/Image-based Automatic Modeling Program for Neutronics and Radiation Transport Simulation) was developed as an interface program to achieve both CAD- and image-based automatic modeling. The advanced version (Version 6) of MCAM can achieve automatic conversion from CT/segmented sectioned images to computational phantoms such as MCNP models. Imaged-based automatic modeling program(MCAM6.0) has been tested by several medical images and sectioned images. And it has been applied in the construction of Rad-HUMAN. Following manual segmentation and 3D reconstruction, a whole-body computational phantom of Chinese adult female called Rad-HUMAN was created by using MCAM6.0 from sectioned images of a Chinese visible human dataset. Rad-HUMAN contains 46 organs/tissues, which faithfully represented the average anatomical characteristics of the Chinese female. The dose conversion coefficients (Dt/Ka) from kerma free-in-air to absorbed dose of Rad-HUMAN were calculated. Rad-HUMAN can be applied to predict and evaluate dose distributions in the Treatment Plan System (TPS), as well as radiation exposure for human body in radiation protection. (authors)

Parallel computers and three-dimensional computational electromagnetics

International Nuclear Information System (INIS)

Madsen, N.K.

1994-01-01

The authors have continued to enhance their ability to use new massively parallel processing computers to solve time-domain electromagnetic problems. New vectorization techniques have improved the performance of their code DSI3D by factors of 5 to 15, depending on the computer used. New radiation boundary conditions and far-field transformations now allow the computation of radar cross-section values for complex objects. A new parallel-data extraction code has been developed that allows the extraction of data subsets from large problems, which have been run on parallel computers, for subsequent post-processing on workstations with enhanced graphics capabilities. A new charged-particle-pushing version of DSI3D is under development. Finally, DSI3D has become a focal point for several new Cooperative Research and Development Agreement activities with industrial companies such as Lockheed Advanced Development Company, Varian, Hughes Electron Dynamics Division, General Atomic, and Cray

How do trees grow? Response from the graphical and quantitative analyses of computed tomography scanning data collected on stem sections.

Science.gov (United States)

Dutilleul, Pierre; Han, Li Wen; Beaulieu, Jean

2014-06-01

Tree growth, as measured via the width of annual rings, is used for environmental impact assessment and climate back-forecasting. This fascinating natural process has been studied at various scales in the stem (from cell and fiber within a growth ring, to ring and entire stem) in one, two, and three dimensions. A new approach is presented to study tree growth in 3D from stem sections, at a scale sufficiently small to allow the delineation of reliable limits for annual rings and large enough to capture directional variation in growth rates. The technology applied is computed tomography scanning, which provides - for one stem section - millions of data (indirect measures of wood density) that can be mapped, together with a companion measure of dispersion and growth ring limits in filigree. Graphical and quantitative analyses are reported for white spruce trees with circular vs non-circular growth. Implications for dendroclimatological research are discussed. Copyright © 2014 Académie des sciences. Published by Elsevier SAS. All rights reserved.

How to maintain hundreds of computers offering different functionalities with only 2 system administrators

International Nuclear Information System (INIS)

Krempaska, R.; Bertrand, A.; Higgs, C.; Kapeller, R.; Lutz, H.; Provenzano, M.

2012-01-01

At the Paul Scherrer Institute, the control systems of our large research facilities are maintained by the Controls section. These facilities include two proton accelerators, (HIPA and PROSCAN), two electron accelerators, (SLS and the Injector Test Facility of the future SwissFEL) as well as the control systems of all their related beamlines and test facilities. The control system configuration and applications for each facility is stored on independent NFS file servers. The total number of Linux computers and servers is about 500. Since only two system administrators are responsible for their installation, configuration and maintenance, we have adopted a well defined solution that relies on 3 ideas: -) Virtualization, -) Unified operating system installation and update mechanism, and -) Automatic configuration by a common tool (puppet). This paper describes methods and tools which are used to develop and maintain the challenging computing infrastructure deployed by the Controls section

Evaluation of Cross-Section Sensitivities in Computing Burnup Credit Fission Product Concentrations

International Nuclear Information System (INIS)

Gauld, I.C.

2005-01-01

U.S. Nuclear Regulatory Commission Interim Staff Guidance 8 (ISG-8) for burnup credit covers actinides only, a position based primarily on the lack of definitive critical experiments and adequate radiochemical assay data that can be used to quantify the uncertainty associated with fission product credit. The accuracy of fission product neutron cross sections is paramount to the accuracy of criticality analyses that credit fission products in two respects: (1) the microscopic cross sections determine the reactivity worth of the fission products in spent fuel and (2) the cross sections determine the reaction rates during irradiation and thus influence the accuracy of predicted final concentrations of the fission products in the spent fuel. This report evaluates and quantifies the importance of the fission product cross sections in predicting concentrations of fission products proposed for use in burnup credit. The study includes an assessment of the major fission products in burnup credit and their production precursors. Finally, the cross-section importances, or sensitivities, are combined with the importance of each major fission product to the system eigenvalue (k eff ) to determine the net importance of cross sections to k eff . The importances established the following fission products, listed in descending order of priority, that are most likely to benefit burnup credit when their cross-section uncertainties are reduced: 151 Sm, 103 Rh, 155 Eu, 150 Sm, 152 Sm, 153 Eu, 154 Eu, and 143 Nd

Highly reliable computer network for real time system

International Nuclear Information System (INIS)

Mohammed, F.A.; Omar, A.A.; Ayad, N.M.A.; Madkour, M.A.I.; Ibrahim, M.K.

1988-01-01

Many of computer networks have been studied different trends regarding the network architecture and the various protocols that govern data transfers and guarantee a reliable communication among all a hierarchical network structure has been proposed to provide a simple and inexpensive way for the realization of a reliable real-time computer network. In such architecture all computers in the same level are connected to a common serial channel through intelligent nodes that collectively control data transfers over the serial channel. This level of computer network can be considered as a local area computer network (LACN) that can be used in nuclear power plant control system since it has geographically dispersed subsystems. network expansion would be straight the common channel for each added computer (HOST). All the nodes are designed around a microprocessor chip to provide the required intelligence. The node can be divided into two sections namely a common section that interfaces with serial data channel and a private section to interface with the host computer. This part would naturally tend to have some variations in the hardware details to match the requirements of individual host computers. fig 7

Computers in Nuclear Physics Division

International Nuclear Information System (INIS)

Kowalczyk, M.; Tarasiuk, J.; Srebrny, J.

1997-01-01

Improving of the computer equipment in Nuclear Physics Division is described. It include: new computer equipment and hardware upgrading, software developing, new programs for computer booting and modernization of data acquisition systems

Computer literacy among first year medical students in a developing country: A cross sectional study

Science.gov (United States)

2012-01-01

Background The use of computer assisted learning (CAL) has enhanced undergraduate medical education. CAL improves performance at examinations, develops problem solving skills and increases student satisfaction. The study evaluates computer literacy among first year medical students in Sri Lanka. Methods The study was conducted at Faculty of Medicine, University of Colombo, Sri Lanka between August-September 2008. First year medical students (n = 190) were invited for the study. Data on computer literacy and associated factors were collected by an expert-validated pre-tested self-administered questionnaire. Computer literacy was evaluated by testing knowledge on 6 domains; common software packages, operating systems, database management and the usage of internet and E-mail. A linear regression was conducted using total score for computer literacy as the continuous dependant variable and other independent covariates. Results Sample size-181 (Response rate-95.3%), 49.7% were Males. Majority of the students (77.3%) owned a computer (Males-74.4%, Females-80.2%). Students have gained their present computer knowledge by; a formal training programme (64.1%), self learning (63.0%) or by peer learning (49.2%). The students used computers for predominately; word processing (95.6%), entertainment (95.0%), web browsing (80.1%) and preparing presentations (76.8%). Majority of the students (75.7%) expressed their willingness for a formal computer training programme at the faculty. Mean score for the computer literacy questionnaire was 48.4 ± 20.3, with no significant gender difference (Males-47.8 ± 21.1, Females-48.9 ± 19.6). There were 47.9% students that had a score less than 50% for the computer literacy questionnaire. Students from Colombo district, Western Province and Student owning a computer had a significantly higher mean score in comparison to other students (p computer training was the strongest predictor of computer literacy (β = 13.034), followed by using

12 CFR 1102.27 - Computing time.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Computing time. 1102.27 Section 1102.27 Banks... for Proceedings § 1102.27 Computing time. (a) General rule. In computing any period of time prescribed... time begins to run is not included. The last day so computed is included, unless it is a Saturday...

12 CFR 622.21 - Computing time.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Computing time. 622.21 Section 622.21 Banks and... Formal Hearings § 622.21 Computing time. (a) General rule. In computing any period of time prescribed or... run is not to be included. The last day so computed shall be included, unless it is a Saturday, Sunday...

Computer codes KASCO and KARDIF for processing cross-sections data

International Nuclear Information System (INIS)

Muenzel, H.; Neumann, B.; Klewe-Nebenius, H.; Pfennig, G.

1981-01-01

Document of internal interest, not to be sent out without permission of authors. Summary of the computer program developed at the Karlsruhe Charged Group (Kachapag) for producing from EXFOR the handbook series 'Physik Daten/Physics Data Nr. 15' of the Fachinformationszentrum Karlsruhe. (author)

COMPUTATIONAL THINKING

Directory of Open Access Journals (Sweden)

Evgeniy K. Khenner

2016-01-01

Full Text Available Abstract. The aim of the research is to draw attention of the educational community to the phenomenon of computational thinking which actively discussed in the last decade in the foreign scientific and educational literature, to substantiate of its importance, practical utility and the right on affirmation in Russian education.Methods. The research is based on the analysis of foreign studies of the phenomenon of computational thinking and the ways of its formation in the process of education; on comparing the notion of «computational thinking» with related concepts used in the Russian scientific and pedagogical literature.Results. The concept «computational thinking» is analyzed from the point of view of intuitive understanding and scientific and applied aspects. It is shown as computational thinking has evolved in the process of development of computers hardware and software. The practice-oriented interpretation of computational thinking which dominant among educators is described along with some ways of its formation. It is shown that computational thinking is a metasubject result of general education as well as its tool. From the point of view of the author, purposeful development of computational thinking should be one of the tasks of the Russian education.Scientific novelty. The author gives a theoretical justification of the role of computational thinking schemes as metasubject results of learning. The dynamics of the development of this concept is described. This process is connected with the evolution of computer and information technologies as well as increase of number of the tasks for effective solutions of which computational thinking is required. Author substantiated the affirmation that including «computational thinking » in the set of pedagogical concepts which are used in the national education system fills an existing gap.Practical significance. New metasubject result of education associated with

Rule-Blocking and Forward-Looking Conditions in the Computational Modelling of Pāṇinian Derivation

Science.gov (United States)

Scharf, Peter M.

Attempting to model Pāṇinian procedure computationally forces one to clarify concepts explicitly and allows one to test various versions and interpretations of his grammar against each other and against bodies of extant Sanskrit texts. To model Pāṇinian procedure requires creating data structures and a framework that allow one to approximate the statement of Pāṇinian rules in an executable language. Scharf (2009: 117-125) provided a few examples of how rules would be formulated in a computational model of Pāṇinian grammar as opposed to in software that generated speech forms without regard to Pāṇinian procedure. Mishra (2009) described the extensive use of attributes to track classification, marking and other features of phonetic strings. Goyal, Kulkarni, and Behera (2009, especially sec. 3.5) implemented a model of the asiddhavat section of rules (6.4.22-129) in which the state of the data passed to rules of the section is maintained unchanged and is utilized by those rules as conditions, yet the rules of the section are applied in parallel, and the result of all applicable rules applying exits the section. The current paper describes Scharf and Hyman's implementation of rule blocking and forward-looking conditions. The former deals with complex groups of rules concerned with domains included within the scope of a general rule. The latter concerns a case where a decision at an early stage in the derivation requires evaluation of conditions that do not obtain until a subsequent stage in the derivation.

Integral nucleus-nucleus cross sections

International Nuclear Information System (INIS)

Barashenkov, V.S.; Kumawat, H.

2003-01-01

Expressions approximating the experimental integral cross sections for elastic and inelastic interactions of light and heavy nuclei at the energies up to several GeV/nucleon are presented. The calculated cross sections are inside the corridor of experimental errors or very close to it. Described in detail FORTRAN code and a numerical example of the cross section approximation are also presented

Secure cloud computing

CERN Document Server

Jajodia, Sushil; Samarati, Pierangela; Singhal, Anoop; Swarup, Vipin; Wang, Cliff

2014-01-01

This book presents a range of cloud computing security challenges and promising solution paths. The first two chapters focus on practical considerations of cloud computing. In Chapter 1, Chandramouli, Iorga, and Chokani describe the evolution of cloud computing and the current state of practice, followed by the challenges of cryptographic key management in the cloud. In Chapter 2, Chen and Sion present a dollar cost model of cloud computing and explore the economic viability of cloud computing with and without security mechanisms involving cryptographic mechanisms. The next two chapters addres

A Cross-Section Adjustment Method for Double Heterogeneity Problem in VHTGR Analysis

International Nuclear Information System (INIS)

Yun, Sung Hwan; Cho, Nam Zin

2011-01-01

Very High Temperature Gas-Cooled Reactors (VHTGRs) draw strong interest as candidates for a Gen-IV reactor concept, in which TRISO (tristructuralisotropic) fuel is employed to enhance the fuel performance. However, randomly dispersed TRISO fuel particles in a graphite matrix induce the so-called double heterogeneity problem. For design and analysis of such reactors with the double heterogeneity problem, the Monte Carlo method is widely used due to its complex geometry and continuous-energy capabilities. However, its huge computational burden, even in the modern high computing power, is still problematic to perform wholecore analysis in reactor design procedure. To address the double heterogeneity problem using conventional lattice codes, the RPT (Reactivityequivalent Physical Transformation) method considers a homogenized fuel region that is geometrically transformed to provide equivalent self-shielding effect. Another method is the coupled Monte Carlo/Collision Probability method, in which the absorption and nu-fission resonance cross-section libraries in the deterministic CPM3 lattice code are modified group-wise by the double heterogeneity factors determined by Monte Carlo results. In this paper, a new two-step Monte Carlo homogenization method is described as an alternative to those methods above. In the new method, a single cross-section adjustment factor is introduced to provide self-shielding effect equivalent to the self-shielding in heterogeneous geometry for a unit cell of compact fuel. Then, the homogenized fuel compact material with the equivalent cross-section adjustment factor is used in continuous-energy Monte Carlo calculation for various types of fuel blocks (or assemblies). The procedure of cross-section adjustment is implemented in the MCNP5 code

Roadmap to greener computing

CERN Document Server

Nguemaleu, Raoul-Abelin Choumin

2014-01-01

A concise and accessible introduction to green computing and green IT, this book addresses how computer science and the computer infrastructure affect the environment and presents the main challenges in making computing more environmentally friendly. The authors review the methodologies, designs, frameworks, and software development tools that can be used in computer science to reduce energy consumption and still compute efficiently. They also focus on Computer Aided Design (CAD) and describe what design engineers and CAD software applications can do to support new streamlined business directi

26 CFR 1.48-3 - Used section 38 property.

Science.gov (United States)

2010-04-01

... Computing Credit for Investment in Certain Depreciable Property § 1.48-3 Used section 38 property. (a) In... computing qualified investment is $800 ($2,000 less $1,200). Example 4. In 1962, C acquires property 1, an... purposes of computing qualified investment the cost of property 2 is not reduced by any part of the...

COMPUTING

CERN Multimedia

M. Kasemann

Overview During the past three months activities were focused on data operations, testing and re-enforcing shift and operational procedures for data production and transfer, MC production and on user support. Planning of the computing resources in view of the new LHC calendar in ongoing. Two new task forces were created for supporting the integration work: Site Commissioning, which develops tools helping distributed sites to monitor job and data workflows, and Analysis Support, collecting the user experience and feedback during analysis activities and developing tools to increase efficiency. The development plan for DMWM for 2009/2011 was developed at the beginning of the year, based on the requirements from the Physics, Computing and Offline groups (see Offline section). The Computing management meeting at FermiLab on February 19th and 20th was an excellent opportunity discussing the impact and for addressing issues and solutions to the main challenges facing CMS computing. The lack of manpower is particul...

Is an eclipse described in the Odyssey?

Science.gov (United States)

Baikouzis, Constantino; Magnasco, Marcelo O

2008-07-01

Plutarch and Heraclitus believed a certain passage in the 20th book of the Odyssey ("Theoclymenus's prophecy") to be a poetic description of a total solar eclipse. In the late 1920s, Schoch and Neugebauer computed that the solar eclipse of 16 April 1178 B.C.E. was total over the Ionian Islands and was the only suitable eclipse in more than a century to agree with classical estimates of the decade-earlier sack of Troy around 1192-1184 B.C.E. However, much skepticism remains about whether the verses refer to this, or any, eclipse. To contribute to the issue independently of the disputed eclipse reference, we analyze other astronomical references in the Epic, without assuming the existence of an eclipse, and search for dates matching the astronomical phenomena we believe they describe. We use three overt astronomical references in the epic: to Boötes and the Pleiades, Venus, and the New Moon; we supplement them with a conjectural identification of Hermes's trip to Ogygia as relating to the motion of planet Mercury. Performing an exhaustive search of all possible dates in the span 1250-1115 B.C., we looked to match these phenomena in the order and manner that the text describes. In that period, a single date closely matches our references: 16 April 1178 B.C.E. We speculate that these references, plus the disputed eclipse reference, may refer to that specific eclipse.

Cloud computing: Overview of available solutions

OpenAIRE

Feňko, Marek

2012-01-01

The paper Works describes concept of cloud computing, his main characteristics. Cloud computing is new trend in IT. The company doesn't have your own servers and data centres, but everything is situated in cloud -- in set of pc and server. The owners of these are suppliers of these services. The aim of the thesis is defined Cloud Computing concepts and evaluate by criterion if cloud computing application can compete to classic application. Introduction of the Works describe the gist of cloud ...

Report on the IAEA Nuclear Data Section to the International Nuclear Data Committee for the period January - December 1999

International Nuclear Information System (INIS)

Lone, M.A.; Muir, D.W.

2000-07-01

This report describes the activities of the IAEA Nuclear Data Section in 1999. It provides information on the staff and budget, activities of the Nuclear Data Center, coordination of the Nuclear Data Center Networks, nuclear data development projects, technology transfer, computer support, and atomic and molecular data activities. This is complemented by additional information on activities in the reporting period, including meetings, publications and new data products. (author)

Introduction to the special section on peer-to-peer computing and web data management

Institute of Scientific and Technical Information of China (English)

Aoying ZHOU

2008-01-01

@@ Peer-to-peer (P2P) computing has been attracting attention from quite a few researchers and practitioners from different fields of computer science, such as networking, distributed computing, and database. Over P2P environment, the data management becomes a challenging issue.

Intrinsic acoustical cross sections in the multiple scattering by a pair of rigid cylindrical particles in 2D

Science.gov (United States)

Mitri, F. G.

2017-08-01

The multiple scattering effects occurring between two scatterers are described based upon the multipole expansion formalism as well as the addition theorem of cylindrical wave functions. An original approach is presented in which an effective incident acoustic field on a particular object, which includes both the primary and re-scattered waves from the other particle is determined first, and then used with the scattered field to derive closed-form analytical expressions for the inherent (i.e. intrinsic) cross-sections based on the far-field scattering. This method does not introduce any approximation in the calculation of the intrinsic cross-sections since the procedure is reduced to the one-body problem. The mathematical expressions for the intrinsic cross-sections are formulated in partial-wave series expansions (PWSEs) in cylindrical coordinates involving the angle of incidence, the addition theorem for the cylindrical wave functions, and the expansion coefficients of the scatterers. Numerical examples illustrate the analysis for two rigid circular cylindrical cross-sections with different radii immersed in a non-viscous fluid. Computations for the dimensionless extrinsic and intrinsic extinction cross-section factors are evaluated with particular emphasis on varying the angle of incidence, the interparticle distance, as well as the sizes of the particles. A symmetric behavior is observed for the dimensionless extrinsic extinction cross-section, while asymmetry arises for the intrinsic extinction cross-section of each particle with respect to the angle of incidence. The present analysis provides a complete analytical and computational method for the prediction of the intrinsic (local) scattering, absorption and extinction cross-sections in the multiple acoustic scatterings of plane progressive waves of arbitrary incidence by a pair of scatterers. The results and computational analyses can be used as a priori information for future applications to guide the

Intrinsic acoustical cross sections in the multiple scattering by a pair of rigid cylindrical particles in 2D

International Nuclear Information System (INIS)

Mitri, F G

2017-01-01

The multiple scattering effects occurring between two scatterers are described based upon the multipole expansion formalism as well as the addition theorem of cylindrical wave functions. An original approach is presented in which an effective incident acoustic field on a particular object, which includes both the primary and re-scattered waves from the other particle is determined first, and then used with the scattered field to derive closed-form analytical expressions for the inherent (i.e. intrinsic) cross-sections based on the far-field scattering. This method does not introduce any approximation in the calculation of the intrinsic cross-sections since the procedure is reduced to the one-body problem. The mathematical expressions for the intrinsic cross-sections are formulated in partial-wave series expansions (PWSEs) in cylindrical coordinates involving the angle of incidence, the addition theorem for the cylindrical wave functions, and the expansion coefficients of the scatterers. Numerical examples illustrate the analysis for two rigid circular cylindrical cross-sections with different radii immersed in a non-viscous fluid. Computations for the dimensionless extrinsic and intrinsic extinction cross-section factors are evaluated with particular emphasis on varying the angle of incidence, the interparticle distance, as well as the sizes of the particles. A symmetric behavior is observed for the dimensionless extrinsic extinction cross-section, while asymmetry arises for the intrinsic extinction cross-section of each particle with respect to the angle of incidence. The present analysis provides a complete analytical and computational method for the prediction of the intrinsic (local) scattering, absorption and extinction cross-sections in the multiple acoustic scatterings of plane progressive waves of arbitrary incidence by a pair of scatterers. The results and computational analyses can be used as a priori information for future applications to guide the

Practical scientific computing

CERN Document Server

Muhammad, A

2011-01-01

Scientific computing is about developing mathematical models, numerical methods and computer implementations to study and solve real problems in science, engineering, business and even social sciences. Mathematical modelling requires deep understanding of classical numerical methods. This essential guide provides the reader with sufficient foundations in these areas to venture into more advanced texts. The first section of the book presents numEclipse, an open source tool for numerical computing based on the notion of MATLAB®. numEclipse is implemented as a plug-in for Eclipse, a leading integ

Report of the IAEA Nuclear Data Section to the International Nuclear Data Committee for the period 1997-1998

International Nuclear Information System (INIS)

Oblozinsky, P.

1999-04-01

This progress report describes the activities of the IAEA Nuclear Data Section in the years 1997 and 1998. The report provides information on the staff and budget, activities of the Nuclear Data Centre, co-ordination of the Nuclear Data Centre Networks, nuclear data development projects, technology transfer, computer support, and atomic and molecular data activities. This is complemented by additional information, including meetings, publications and new products that illustrate activities in the reported period. (author)

Theoretical computer science and the natural sciences

Science.gov (United States)

Marchal, Bruno

2005-12-01

I present some fundamental theorems in computer science and illustrate their relevance in Biology and Physics. I do not assume prerequisites in mathematics or computer science beyond the set N of natural numbers, functions from N to N, the use of some notational conveniences to describe functions, and at some point, a minimal amount of linear algebra and logic. I start with Cantor's transcendental proof by diagonalization of the non enumerability of the collection of functions from natural numbers to the natural numbers. I explain why this proof is not entirely convincing and show how, by restricting the notion of function in terms of discrete well defined processes, we are led to the non algorithmic enumerability of the computable functions, but also-through Church's thesis-to the algorithmic enumerability of partial computable functions. Such a notion of function constitutes, with respect to our purpose, a crucial generalization of that concept. This will make easy to justify deep and astonishing (counter-intuitive) incompleteness results about computers and similar machines. The modified Cantor diagonalization will provide a theory of concrete self-reference and I illustrate it by pointing toward an elementary theory of self-reproduction-in the Amoeba's way-and cellular self-regeneration-in the flatworm Planaria's way. To make it easier, I introduce a very simple and powerful formal system known as the Schoenfinkel-Curry combinators. I will use the combinators to illustrate in a more concrete way the notion introduced above. The combinators, thanks to their low-level fine grained design, will also make it possible to make a rough but hopefully illuminating description of the main lessons gained by the careful observation of nature, and to describe some new relations, which should exist between computer science, the science of life and the science of inert matter, once some philosophical, if not theological, hypotheses are made in the cognitive sciences. In the

Possible Computer Vision Systems and Automated or Computer-Aided Edging and Trimming

Science.gov (United States)

Philip A. Araman

1990-01-01

This paper discusses research which is underway to help our industry reduce costs, increase product volume and value recovery, and market more accurately graded and described products. The research is part of a team effort to help the hardwood sawmill industry automate with computer vision systems, and computer-aided or computer controlled processing. This paper...

Electronic digital computers their use in science and engineering

CERN Document Server

Alt, Franz L

1958-01-01

Electronic Digital Computers: Their Use in Science and Engineering describes the principles underlying computer design and operation. This book describes the various applications of computers, the stages involved in using them, and their limitations. The machine is composed of the hardware which is run by a program. This text describes the use of magnetic drum for storage of data and some computing. The functions and components of the computer include automatic control, memory, input of instructions by using punched cards, and output from resulting information. Computers operate by using numbe

Final Technical Report: Sparse Grid Scenario Generation and Interior Algorithms for Stochastic Optimization in a Parallel Computing Environment

Energy Technology Data Exchange (ETDEWEB)

Mehrotra, Sanjay [Northwestern Univ., Evanston, IL (United States)

2016-09-07

The support from this grant resulted in seven published papers and a technical report. Two papers are published in SIAM J. on Optimization [87, 88]; two papers are published in IEEE Transactions on Power Systems [77, 78]; one paper is published in Smart Grid [79]; one paper is published in Computational Optimization and Applications [44] and one in INFORMS J. on Computing [67]). The works in [44, 67, 87, 88] were funded primarily by this DOE grant. The applied papers in [77, 78, 79] were also supported through a subcontract from the Argonne National Lab. We start by presenting our main research results on the scenario generation problem in Sections 1–2. We present our algorithmic results on interior point methods for convex optimization problems in Section 3. We describe a new ‘central’ cutting surface algorithm developed for solving large scale convex programming problems (as is the case with our proposed research) with semi-infinite number of constraints in Section 4. In Sections 5–6 we present our work on two application problems of interest to DOE.

Evaluating Computer Screen Time and Its Possible Link to Psychopathology in the Context of Age: A Cross-Sectional Study of Parents and Children.

Science.gov (United States)

Segev, Aviv; Mimouni-Bloch, Aviva; Ross, Sharon; Silman, Zmira; Maoz, Hagai; Bloch, Yuval

2015-01-01

Several studies have suggested that high levels of computer use are linked to psychopathology. However, there is ambiguity about what should be considered normal or over-use of computers. Furthermore, the nature of the link between computer usage and psychopathology is controversial. The current study utilized the context of age to address these questions. Our hypothesis was that the context of age will be paramount for differentiating normal from excessive use, and that this context will allow a better understanding of the link to psychopathology. In a cross-sectional study, 185 parents and children aged 3-18 years were recruited in clinical and community settings. They were asked to fill out questionnaires regarding demographics, functional and academic variables, computer use as well as psychiatric screening questionnaires. Using a regression model, we identified 3 groups of normal-use, over-use and under-use and examined known factors as putative differentiators between the over-users and the other groups. After modeling computer screen time according to age, factors linked to over-use were: decreased socialization (OR 3.24, Confidence interval [CI] 1.23-8.55, p = 0.018), difficulty to disengage from the computer (OR 1.56, CI 1.07-2.28, p = 0.022) and age, though borderline-significant (OR 1.1 each year, CI 0.99-1.22, p = 0.058). While psychopathology was not linked to over-use, post-hoc analysis revealed that the link between increased computer screen time and psychopathology was age-dependent and solidified as age progressed (p = 0.007). Unlike computer usage, the use of small-screens and smartphones was not associated with psychopathology. The results suggest that computer screen time follows an age-based course. We conclude that differentiating normal from over-use as well as defining over-use as a possible marker for psychiatric difficulties must be performed within the context of age. If verified by additional studies, future research should integrate

Numerical Study of Detonation Wave Propagation in the Variable Cross-Section Channel Using Unstructured Computational Grids

Directory of Open Access Journals (Sweden)

Alexander Lopato

2018-01-01

Full Text Available The work is dedicated to the numerical study of detonation wave initiation and propagation in the variable cross-section axisymmetric channel filled with the model hydrogen-air mixture. The channel models the large-scale device for the utilization of worn-out tires. Mathematical model is based on two-dimensional axisymmetric Euler equations supplemented by global chemical kinetics model. The finite volume computational algorithm of the second approximation order for the calculation of two-dimensional flows with detonation waves on fully unstructured grids with triangular cells is developed. Three geometrical configurations of the channel are investigated, each with its own degree of the divergence of the conical part of the channel from the point of view of the pressure from the detonation wave on the end wall of the channel. The problem in consideration relates to the problem of waste recycling in the devices based on the detonation combustion of the fuel.

Photoionization cross section by Stieltjes imaging applied to coupled cluster Lanczos pseudo-spectra

Science.gov (United States)

Cukras, Janusz; Coriani, Sonia; Decleva, Piero; Christiansen, Ove; Norman, Patrick

2013-09-01

A recently implemented asymmetric Lanczos algorithm for computing (complex) linear response functions within the coupled cluster singles (CCS), coupled cluster singles and iterative approximate doubles (CC2), and coupled cluster singles and doubles (CCSD) is coupled to a Stieltjes imaging technique in order to describe the photoionization cross section of atoms and molecules, in the spirit of a similar procedure recently proposed by Averbukh and co-workers within the Algebraic Diagrammatic Construction approach. Pilot results are reported for the atoms He, Ne, and Ar and for the molecules H2, H2O, NH3, HF, CO, and CO2.

Photoionization cross section by Stieltjes imaging applied to coupled cluster Lanczos pseudo-spectra

International Nuclear Information System (INIS)

Cukras, Janusz; Coriani, Sonia; Decleva, Piero; Christiansen, Ove; Norman, Patrick

2013-01-01

A recently implemented asymmetric Lanczos algorithm for computing (complex) linear response functions within the coupled cluster singles (CCS), coupled cluster singles and iterative approximate doubles (CC2), and coupled cluster singles and doubles (CCSD) is coupled to a Stieltjes imaging technique in order to describe the photoionization cross section of atoms and molecules, in the spirit of a similar procedure recently proposed by Averbukh and co-workers within the Algebraic Diagrammatic Construction approach. Pilot results are reported for the atoms He, Ne, and Ar and for the molecules H 2 , H 2 O, NH 3 , HF, CO, and CO 2

Approximation and Computation

CERN Document Server

Gautschi, Walter; Rassias, Themistocles M

2011-01-01

Approximation theory and numerical analysis are central to the creation of accurate computer simulations and mathematical models. Research in these areas can influence the computational techniques used in a variety of mathematical and computational sciences. This collection of contributed chapters, dedicated to renowned mathematician Gradimir V. Milovanovia, represent the recent work of experts in the fields of approximation theory and numerical analysis. These invited contributions describe new trends in these important areas of research including theoretic developments, new computational alg

Computer radiography-X-ray with vision

International Nuclear Information System (INIS)

Waitiki, C.

2006-01-01

Computer radiography describes an entire process of creating a digital image including acquiring, processing, presenting and managing the image data. the cassettes are special in that they use an imaging plate instead of films. the imaging plate is coated with storage phosphors which captures x-ray as they pass through the patient. the imaging plate is read with a bar code reader and the imaging plate number recorded in the computer. The cassette is then loaded in the reader unit where it is read using infra-red light which excites the particles on the plate which in turn illuminates and picked by photo-sensors which converts the signal into digital pulses. the pulses then run through a board which converts it into an image which is then displayed on the control console. The plate then runs through the erasure section where it is exposed to yellow light, which erases the plate. The IP is then put back in the cassette and locked and can be reused for the next episode

Orbital computed tomography: technical aspects

International Nuclear Information System (INIS)

Beck, T.J.; Rosenbaum, A.E.; Miller, N.R.

1982-01-01

Computed tomographic scanning has revolutionized the diagnosis and management of orbital disease. The best use of this methodology requires knowledge of the principles and appropriate attention to scanning protocols. Computed tomographic scanning of the orbit is a demanding technique requiring thin sections through planes precisely positioned from the topographical anatomy. Ideally, orbital CT should include both transverse axial and coronal sections: The pathological condition and its plane of growth will influence the selection of the optimal plane or section. Coronal sections may be obtained either directly or indirectly by computer reconstruction from contiguous transverse images. Sagittal or oblique sections or both also are useful and may be obtained directly or indirectly. Difficulty in patient positioning may preclude direct sagittal imaging, however. The use of intravenous contrast enhancement is not necessary as a routine technique unless a mass is identified or suspected. Where surgical resection or biopsy of a space-occupying lesion is contemplated, contrast enhancement can be valuable in assessing relative vascularity and aiding diagnostic specificity. It should be continually emphasized that CT is a powerful technology which, in orbital diagnosis, produces the highest yield when clinician and radiologist collaborate in the radiodiagnostic workup. The clinical information supplied by the referring ophthalmologist is used by the radiologist both in the selection of the appropriate techniques for investigation and in striving to achieve the most specific conclusion

Generation of cross-sections and reference solutions using the code Serpent

International Nuclear Information System (INIS)

Gomez T, A. M.; Delfin L, A.; Del Valle G, E.

2012-10-01

Serpent is a code that solves the neutron transport equations using the Monte Carlo method that besides generating reference solutions in stationary state for complex geometry problems, has been specially designed for physical applications of cells, what includes the generation of homogenized cross-sections for several energy groups. In this work a calculation methodology is described using the code Serpent to generate the necessary cross-sections to carry out calculations with the code TNXY, developed in 1993 in the Nuclear Engineering Department of the Instituto Politecnico Nacional (Mexico) by means of an interface programmed in Octave. The computation program TNXY solves the neutron transport equations for several energy groups in stationary state and geometry X Y using the Discreet Ordinates method (S N ). To verify and to validate the methodology the results of TNXY were compared with those calculated by Serpent giving minor differences to 0.55% in the value of the multiplication factor. (Author)

Computer Tutors: An Innovative Approach to Computer Literacy. Part I: The Early Stages.

Science.gov (United States)

Targ, Joan

1981-01-01

In Part I of this two-part article, the author describes the evolution of the Computer Tutor project in Palo Alto, California, and the strategies she incorporated into a successful student-taught computer literacy program. Journal availability: Educational Computer, P.O. Box 535, Cupertino, CA 95015. (Editor/SJL)

29 CFR 4000.28 - What if I send a computer disk?

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

Computed Tomography evaluation of maxillofacial injuries

Directory of Open Access Journals (Sweden)

V Natraj Prasad

2017-01-01

Full Text Available Background & Objectives: The maxillofacial region, a complex anatomical structure, can be evaluated by conventional (plain films, Tomography, Multidetector Computed Tomography, Three-Dimensional Computed Tomography, Orthopantomogram and Magnetic Resonance Imaging. The study was conducted with objective of describing various forms of maxillofacial injuries, imaging features of different types of maxillofacial fractures and the advantage of using Three- Dimensional Computed Tomography reconstructed image. Materials & Methods: A hospital based cross-sectional study was conducted among 50 patients during April 2014 to September 2016 using Toshiba Aquilion Prime 160 slice Multi Detector Computed Tomography scanner.Results: The maxillofacial fractures were significantly higher in male population (88% than female population (12 %. Road traffic accidents were the most common cause of injury others being physical assault and fall from height. It was most common in 31-40 years (26% and 21-30 (24% years age group. Maxillary sinus was the commonest fracture (36% followed by nasal bone and zygomatic bone (30%, mandible and orbital bones (28%. Soft tissue swelling was the commonest associated finding. Three dimensional images (3 D compared to the axial scans missed some fractures. However, the extension of the complex fracture lines and degree of displacement were more accurately assessed. Complex fractures found were Le fort (6% and naso-orbito-ethmoid (4% fractures.Conclusion: The proper evaluation of complex anatomy of the facial bones requires Multidetector Computed Tomography which offers excellent spatial resolution enabling multiplanar reformations and three dimensional reconstructions for enhanced diagnostic accuracy and surgical planning.

Beyond the Computer Literacy.

Science.gov (United States)

Streibel, Michael J.; Garhart, Casey

1985-01-01

Describes the approach taken in an education computing course for pre- and in-service teachers. Outlines the basic operational, analytical, and evaluation skills that are emphasized in the course, suggesting that these skills go beyond the attainment of computer literacy and can assist in the effective use of computers. (ML)

Computed tomography apparatus

International Nuclear Information System (INIS)

Fairbairn, I.A.

1984-01-01

In fan-beam computed tomography apparatus, timing reference pulses, normally occurring at intervals t, for data transfer and reset of approx. 500 integrators in the signal path from the detector array, are generated from the scan displacement, e.g. using a graticule and optical sensor to relate the measurement paths geometrically to the body section. Sometimes, a slow scan rate is required to provide a time-averaged density image, e.g. for planning irradiation therapy, and then the sensed impulses will occur at extended intervals and can cause integrator overload. An improvement is described which provides a pulse generator which responds to a reduced scan rate by generating a succession of further transfer and reset pulses at intervals approximately equal to t starting a time t after each timing reference pulse. Then, using an adding device and RAM, all the transferred signals integrated in the interval t' between two successive slow scan reference pulses are accumulated in order to form a corresponding measurement signal. (author)

21 CFR 868.1730 - Oxygen uptake computer.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oxygen uptake computer. 868.1730 Section 868.1730...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1730 Oxygen uptake computer. (a) Identification. An oxygen uptake computer is a device intended to compute the amount of oxygen consumed by a...

AXMIX program for cross section mixing and library arrangement

International Nuclear Information System (INIS)

Haynes, G.C.

1976-03-01

AXMIX is a FORTRAN IV computer code written to provide the user a tool for creating cross-section data sets for ANISN and DOT from cross-section sets already available on cards, nuclide-organized libraries, and group-independent data sets. Numerous options, including adjointing, P/sub n/ adjustments, and changing table length, are available to give the user broad flexibility. The number of energy groups which will fit into the core allocated is determined first. If all groups will fit, the solution is straightforward; if not, then the maximum number of groups which will fit is processed repeatedly by using direct access I/O and storage disks. Some flexibility in applying AXMIX is lost when cross sections to be processed contain upscatter. A special section on upscatter is included in the report. AXMIX is written for IBM System 360 computers with at least 150K bytes of memory. Problems of a practical nature require from 2 to 20 seconds of CPU time on a 360/91 computer. Running time is inversely proportional to the number of groups of data which will fit into core memory. I/O time is 50 to 100 times CPU time

Program PLOTC4. (Version 87-1). Plot evaluated data from the ENDF/B format and/or experimental data which is in a computation format

International Nuclear Information System (INIS)

Cullen, D.E.

1987-06-01

Experimental and evaluated nuclear reaction data are world-wide compiled in EXFOR format (see document IAEA-NDS-1) and ENDF format (see document IAEA-NDS-10), respectively. The computer program PLOTC4 described in the present document plots data from both formats; EXFOR data must be converted first to a ''computation format'' (see document IAEA-NDS-80). The program is available upon request costfree from the IAEA Nuclear Data Section. (author)

Nurses' computer literacy and attitudes towards the use of computers in health care.

Science.gov (United States)

Gürdaş Topkaya, Sati; Kaya, Nurten

2015-05-01

This descriptive and cross-sectional study was designed to address nurses' computer literacy and attitudes towards the use of computers in health care and to determine the correlation between these two variables. This study was conducted with the participation of 688 nurses who worked at two university-affiliated hospitals. These nurses were chosen using a stratified random sampling method. The data were collected using the Multicomponent Assessment of Computer Literacy and the Pretest for Attitudes Towards Computers in Healthcare Assessment Scale v. 2. The nurses, in general, had positive attitudes towards computers, and their computer literacy was good. Computer literacy in general had significant positive correlations with individual elements of computer competency and with attitudes towards computers. If the computer is to be an effective and beneficial part of the health-care system, it is necessary to help nurses improve their computer competency. © 2014 Wiley Publishing Asia Pty Ltd.

Computer literacy among first year medical students in a developing country: A cross sectional study

Directory of Open Access Journals (Sweden)

Ranasinghe Priyanga

2012-09-01

Full Text Available Abstract Background The use of computer assisted learning (CAL has enhanced undergraduate medical education. CAL improves performance at examinations, develops problem solving skills and increases student satisfaction. The study evaluates computer literacy among first year medical students in Sri Lanka. Methods The study was conducted at Faculty of Medicine, University of Colombo, Sri Lanka between August-September 2008. First year medical students (n = 190 were invited for the study. Data on computer literacy and associated factors were collected by an expert-validated pre-tested self-administered questionnaire. Computer literacy was evaluated by testing knowledge on 6 domains; common software packages, operating systems, database management and the usage of internet and E-mail. A linear regression was conducted using total score for computer literacy as the continuous dependant variable and other independent covariates. Results Sample size-181 (Response rate-95.3%, 49.7% were Males. Majority of the students (77.3% owned a computer (Males-74.4%, Females-80.2%. Students have gained their present computer knowledge by; a formal training programme (64.1%, self learning (63.0% or by peer learning (49.2%. The students used computers for predominately; word processing (95.6%, entertainment (95.0%, web browsing (80.1% and preparing presentations (76.8%. Majority of the students (75.7% expressed their willingness for a formal computer training programme at the faculty. Mean score for the computer literacy questionnaire was 48.4 ± 20.3, with no significant gender difference (Males-47.8 ± 21.1, Females-48.9 ± 19.6. There were 47.9% students that had a score less than 50% for the computer literacy questionnaire. Students from Colombo district, Western Province and Student owning a computer had a significantly higher mean score in comparison to other students (p Conclusion Sri Lankan medical undergraduates had a low-intermediate level of computer

Optical and statistical model calculation of the americium 242m capture cross section

International Nuclear Information System (INIS)

Tellier, Henry.

1981-04-01

The capture cross sections of Am 242m can be deduced from resonances analysis at low energy and computed with theoretical models at high energy. In this work, a coherent set of cross sections which reproduced the experimental values of the fission cross sections is computed. These calculations were performed for an energy of the incoming neutron between 1 keV and 1 MeV

DCE. Future IHEP's computing environment

International Nuclear Information System (INIS)

Zheng Guorui; Liu Xiaoling

1995-01-01

IHEP'S computing environment consists of several different computing environments established on IHEP computer networks. In which, the BES environment supported HEP computing is the main part of IHEP computing environment. Combining with the procedure of improvement and extension of BES environment, the authors describe development of computing environments in outline as viewed from high energy physics (HEP) environment establishment. The direction of developing to distributed computing of the IHEP computing environment based on the developing trend of present distributed computing is presented

Computed tomography of the sacrum: 1. normal anatomy

International Nuclear Information System (INIS)

Whelan, M.A.; Gold, R.P.

1982-01-01

The sacrum of a disarticulated pelvis was scanned with a Pfizer 0450 computed tomographic scanner using contiguous 5 mm sections to display the normal computed tomographic anatomy of the sacrum. These anatomic sections were then compared with normal sacrums. In analyzing the computed tomographic anatomy, emphasis was placed on the central canal and sacral foramina, in that these landmarks are important in determining not only the presence but also the type of pathology involving the sacrum

Review on Computational Electromagnetics

Directory of Open Access Journals (Sweden)

P. Sumithra

2017-03-01

Full Text Available Computational electromagnetics (CEM is applied to model the interaction of electromagnetic fields with the objects like antenna, waveguides, aircraft and their environment using Maxwell equations.  In this paper the strength and weakness of various computational electromagnetic techniques are discussed. Performance of various techniques in terms accuracy, memory and computational time for application specific tasks such as modeling RCS (Radar cross section, space applications, thin wires, antenna arrays are presented in this paper.

Computer ray tracing speeds.

Science.gov (United States)

Robb, P; Pawlowski, B

1990-05-01

The results of measuring the ray trace speed and compilation speed of thirty-nine computers in fifty-seven configurations, ranging from personal computers to super computers, are described. A correlation of ray trace speed has been made with the LINPACK benchmark which allows the ray trace speed to be estimated using LINPACK performance data. The results indicate that the latest generation of workstations, using CPUs based on RISC (Reduced Instruction Set Computer) technology, are as fast or faster than mainframe computers in compute-bound situations.

RXY/DRXY-a postprocessing graphical system for scientific computation

International Nuclear Information System (INIS)

Jin Qijie

1990-01-01

Scientific computing require computer graphical function for its visualization. The developing objects and functions of a postprocessing graphical system for scientific computation are described, and also briefly described its implementation

Natural Computing in Computational Finance Volume 4

CERN Document Server

O’Neill, Michael; Maringer, Dietmar

2012-01-01

This book follows on from Natural Computing in Computational Finance  Volumes I, II and III.   As in the previous volumes of this series, the  book consists of a series of  chapters each of  which was selected following a rigorous, peer-reviewed, selection process.  The chapters illustrate the application of a range of cutting-edge natural  computing and agent-based methodologies in computational finance and economics.  The applications explored include  option model calibration, financial trend reversal detection, enhanced indexation, algorithmic trading,  corporate payout determination and agent-based modeling of liquidity costs, and trade strategy adaptation.  While describing cutting edge applications, the chapters are  written so that they are accessible to a wide audience. Hence, they should be of interest  to academics, students and practitioners in the fields of computational finance and  economics.  

Computer performance evaluation of FACOM 230-75 computer system, (2)

International Nuclear Information System (INIS)

Fujii, Minoru; Asai, Kiyoshi

1980-08-01

In this report are described computer performance evaluations for FACOM230-75 computers in JAERI. The evaluations are performed on following items: (1) Cost/benefit analysis of timesharing terminals, (2) Analysis of the response time of timesharing terminals, (3) Analysis of throughout time for batch job processing, (4) Estimation of current potential demands for computer time, (5) Determination of appropriate number of card readers and line printers. These evaluations are done mainly from the standpoint of cost reduction of computing facilities. The techniques adapted are very practical ones. This report will be useful for those people who are concerned with the management of computing installation. (author)

FENDL/E-2.0. Evaluated nuclear data library of neutron-nucleus interaction cross sections and photon production cross sections and photon-atom interaction cross sections for fusion applications. Version 1, March 1997. Summary documentation

International Nuclear Information System (INIS)

Pashchenko, A.B.; Wienke, H.

1998-01-01

This document presents the description of a physical tape containing the basic evaluated nuclear data library of neutron-nucleus interaction cross sections, photon production cross sections and photon-atom interaction cross sections for fusion applications. It is part of the evaluated nuclear data library for fusion applications FENDL-2. The data are available cost-free from the Nuclear Data Section upon request. The data can also be retrieved by the user via online access through international computer networks. (author)

New Mexico district work-effort analysis computer program

Science.gov (United States)

Hiss, W.L.; Trantolo, A.P.; Sparks, J.L.

1972-01-01

The computer program (CAN 2) described in this report is one of several related programs used in the New Mexico District cost-analysis system. The work-effort information used in these programs is accumulated and entered to the nearest hour on forms completed by each employee. Tabulating cards are punched directly from these forms after visual examinations for errors are made. Reports containing detailed work-effort data itemized by employee within each project and account and by account and project for each employee are prepared for both current-month and year-to-date periods by the CAN 2 computer program. An option allowing preparation of reports for a specified 3-month period is provided. The total number of hours worked on each account and project and a grand total of hours worked in the New Mexico District is computed and presented in a summary report for each period. Work effort not chargeable directly to individual projects or accounts is considered as overhead and can be apportioned to the individual accounts and projects on the basis of the ratio of the total hours of work effort for the individual accounts or projects to the total New Mexico District work effort at the option of the user. The hours of work performed by a particular section, such as General Investigations or Surface Water, are prorated and charged to the projects or accounts within the particular section. A number of surveillance or buffer accounts are employed to account for the hours worked on special events or on those parts of large projects or accounts that require a more detailed analysis. Any part of the New Mexico District operation can be separated and analyzed in detail by establishing an appropriate buffer account. With the exception of statements associated with word size, the computer program is written in FORTRAN IV in a relatively low and standard language level to facilitate its use on different digital computers. The program has been run only on a Control Data Corporation

Towards a Density Functional Theory Exchange-Correlation Functional able to describe localization/delocalization

Science.gov (United States)

Mattsson, Ann E.; Wills, John M.

2013-03-01

The inability to computationally describe the physics governing the properties of actinides and their alloys is the poster child of failure of existing Density Functional Theory exchange-correlation functionals. The intricate competition between localization and delocalization of the electrons, present in these materials, exposes the limitations of functionals only designed to properly describe one or the other situation. We will discuss the manifestation of this competition in real materials and propositions on how to construct a functional able to accurately describe properties of these materials. I addition we will discuss both the importance of using the Dirac equation to describe the relativistic effects in these materials, and the connection to the physics of transition metal oxides. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

19 CFR 152.106 - Computed value.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Computed value. 152.106 Section 152.106 Customs... (CONTINUED) CLASSIFICATION AND APPRAISEMENT OF MERCHANDISE Valuation of Merchandise § 152.106 Computed value. (a) Elements. The computed value of imported merchandise is the sum of: (1) The cost or value of the...

19 CFR 141.88 - Computed value.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Computed value. 141.88 Section 141.88 Customs... (CONTINUED) ENTRY OF MERCHANDISE Invoices § 141.88 Computed value. When the port director determines that information as to computed value is necessary in the appraisement of any class or kind of merchandise, he...

USERDA computer software summaries: numbers 240 through 324

International Nuclear Information System (INIS)

1976-12-01

Since 1960 the Argonne Code Center has served as a U.S. Atomic Energy Commission information center for computer programs developed and used primarily for the solution of problems in nuclear physics, reactor design, reactor engineering and operation. The Center, through a network of registered installations, collects, validates, maintains, and distributes a library of these computer programs and publishes a compilation of abstracts describing them. In 1972 the scope of the Center's activities was officially expanded to include computer programs developed in all of the U.S. Atomic Energy Commission program areas and the compilation and publicatuon of this report. The Computer Software Summary report contains summaries of computer programs at the specification stage, under development, being checked out, in use, or available at ERDA offices, laboratories, and contractor installations. Programs are divided into the following categories : cross section and resonance integral calculations; spectrum calculations, generation of group constants, lattice and cell problems; static design studies; depletion, fuel management, cost analysis, and reactor economics; space-independent k;inetics; pace--time kinetics, coupled neutronics--hydrodynamics--thermodynmics and excursion simulations; radiological safety, hazard and accident analysis; heat transfer and fluid flow; deformation and stress distribution computations, structural analysis and engineering design studies; gamma heating and shielddesign programs; reactor systems analysis; data preparation; data management; subsidiary calculations; experimental data processing; general mathematical and computing system routines; materials; environmental and earth sciences; space sciences; electronics and engineering equipment; chemistry; particle accelerators and high-voltage machines; physics; controlled thermonuclear research; biology and medicine; and data

Selection of low activation materials for fusion power plants using ACAB system: the effect of computational methods and cross section uncertainties on waste management assessment

Energy Technology Data Exchange (ETDEWEB)

Alonso, M.; Sanz, J.; Rodriguez, A.; Falquina, R. [Universidad Nacional de Educacion a Distancia (UNED), Dept. of Power Engineering, Madrid (Spain); Cabellos, O.; Sanz, J. [Universidad Politecnica de Madrid, Instituto de Fusion Nuclear (UPM) (Spain)

2003-07-01

The feasibility of nuclear fusion as a realistic option for energy generation depends on its radioactive waste management assessment. In this respect, the production of high level waste is to be avoided and the reduction of low level waste volumes is to be enhanced. Three different waste management options are commonly regarded in fusion plants: Hands-on Recycling, Remote Recycling and Shallow Land Burial (SLB). Therefore, important research work has been undertaken to find low activation structural materials. In performing this task, a major issue is to compute the concentration limits (CLs) for all natural elements, which will be used to select the intended constituent elements of a particular Low Activation Material (LAM) and assess how much the impurities can deteriorate the waste management properties. Nevertheless, the reliable computation of CLs depends on the accuracy of nuclear data (mainly activation cross-sections) and the suitability of the computational method both for inertial and magnetic fusion environments. In this paper the importance of nuclear data uncertainties and mathematical algorithms used in different activation calculations for waste management purposes will be studied. Our work is centred on the study of {sup 186}W activation under first structural wall conditions of Hylife-II inertial fusion reactor design. The importance of the dominant transmutation/decay sequence has been documented in several publications. From a practical point of view, W is used in low activation materials for fusion applications: Cr-W ferritic/martensitic steels, and the need to better compute its activation has been assessed, in particular in relation to the cross-section uncertainties for reactions leading to Ir isotopes. {sup 192n}Ir and {sup 192}Ir reach a secular equilibrium, and {sup 192n}Ir is the critical one for waste management, with a half life of 241 years. From a theoretical point of view, this is one of the most complex chains appearing in

Administrative Computing in Continuing Education.

Science.gov (United States)

Broxton, Harry

1982-01-01

Describes computer applications in the Division of Continuing Education at Brigham Young University. These include instructional applications (computer assisted instruction, computer science education, and student problem solving) and administrative applications (registration, payment records, grades, reports, test scoring, mailing, and others).…

Reliability of computed tomography measurements in assessment of thigh muscle cross-sectional area and attenuation

International Nuclear Information System (INIS)

Strandberg, Sören; Wretling, Marie-Louise; Wredmark, Torsten; Shalabi, Adel

2010-01-01

Advancement in technology of computer tomography (CT) and introduction of new medical imaging softwares enables easy and rapid assessment of muscle cross-sectional area (CSA) and attenuation. Before using these techniques in clinical studies there is a need for evaluation of the reliability of the measurements. The purpose of the study was to evaluate the inter- and intra-observer reliability of ImageJ in measuring thigh muscles CSA and attenuation in patients with anterior cruciate ligament (ACL) injury by computer tomography. 31 patients from an ongoing study of rehabilitation and muscle atrophy after ACL reconstruction were included in the study. Axial CT images with slice thickness of 10 mm at the level of 150 mm above the knee joint were analyzed by two investigators independently at two times with a minimum of 3 weeks between the two readings using NIH ImageJ. CSA and the mean attenuation of individual thigh muscles were analyzed for both legs. Mean CSA and mean attenuation values were in good agreement both when comparing the two observers and the two replicates. The inter- and intraclass correlation (ICC) was generally very high with values from 0.98 to 1.00 for all comparisons except for the area of semimembranosus. All the ICC values were significant (p < 0,001). Pearson correlation coefficients were also generally very high with values from 0.98 to 1.00 for all comparisons except for the area of semimembranosus (0.95 for intraobserver and 0.92 for interobserver). This study has presented ImageJ as a method to monitor and evaluate CSA and attenuation of different muscles in the thigh using CT-imaging. The method shows an overall excellent reliability with respect to both observer and replicate

GNASH: a preequilibrium, statistical nuclear-model code for calculation of cross sections and emission spectra. [In FORTRAN for CDC 7600

Energy Technology Data Exchange (ETDEWEB)

Young, P.G.; Arthur, E.D.

1977-11-01

A new multistep Hauser--Feshbach code that includes corrections for preequilibrium effects is described. The code can calculate up to 60 decay reactions (cross sections and energy spectra) in one computation, and thereby provide considerable flexibility for handling processes with complicated reaction chains. Input parameter setup, problem output, and subroutine descriptions are given along with a sample problem calculation. A brief theoretical description is also included. 8 figures, 3 tables.

My Computer Is Learning.

Science.gov (United States)

Good, Ron

1986-01-01

Describes instructional uses of computer programs found in David Heiserman's book "Projects in Machine Intelligence for Your Home Computer." The programs feature "creatures" of various colors that move around within a rectangular white border. (JN)

ZIVIS: A City Computing Platform Based on Volunteer Computing

International Nuclear Information System (INIS)

Antoli, B.; Castejon, F.; Giner, A.; Losilla, G.; Reynolds, J. M.; Rivero, A.; Sangiao, S.; Serrano, F.; Tarancon, A.; Valles, R.; Velasco, J. L.

2007-01-01

Abstract Volunteer computing has come up as a new form of distributed computing. Unlike other computing paradigms like Grids, which use to be based on complex architectures, volunteer computing has demonstrated a great ability to integrate dispersed, heterogeneous computing resources with ease. This article presents ZIVIS, a project which aims to deploy a city-wide computing platform in Zaragoza (Spain). ZIVIS is based on BOINC (Berkeley Open Infrastructure for Network Computing), a popular open source framework to deploy volunteer and desktop grid computing systems. A scientific code which simulates the trajectories of particles moving inside a stellarator fusion device, has been chosen as the pilot application of the project. In this paper we describe the approach followed to port the code to the BOINC framework as well as some novel techniques, based on standard Grid protocols, we have used to access the output data present in the BOINC server from a remote visualizer. (Author)

Classroom Computer Network.

Science.gov (United States)

Lent, John

1984-01-01

This article describes a computer network system that connects several microcomputers to a single disk drive and one copy of software. Many schools are switching to networks as a cheaper and more efficient means of computer instruction. Teachers may be faced with copywriting problems when reproducing programs. (DF)

Computers and Creativity.

Science.gov (United States)

Ten Dyke, Richard P.

1982-01-01

A traditional question is whether or not computers shall ever think like humans. This question is redirected to a discussion of whether computers shall ever be truly creative. Creativity is defined and a program is described that is designed to complete creatively a series problem in mathematics. (MP)

Validation of MCNP6 Version 1.0 with the ENDF/B-VII.1 Cross Section Library for Plutonium Metals, Oxides, and Solutions on the High Performance Computing Platform Moonlight

Energy Technology Data Exchange (ETDEWEB)

Chapman, Bryan Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gough, Sean T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-12-05

This report documents a validation of the MCNP6 Version 1.0 computer code on the high performance computing platform Moonlight, for operations at Los Alamos National Laboratory (LANL) that involve plutonium metals, oxides, and solutions. The validation is conducted using the ENDF/B-VII.1 continuous energy group cross section library at room temperature. The results are for use by nuclear criticality safety personnel in performing analysis and evaluation of various facility activities involving plutonium materials.

Computer interfacing

CERN Document Server

Dixey, Graham

1994-01-01

This book explains how computers interact with the world around them and therefore how to make them a useful tool. Topics covered include descriptions of all the components that make up a computer, principles of data exchange, interaction with peripherals, serial communication, input devices, recording methods, computer-controlled motors, and printers.In an informative and straightforward manner, Graham Dixey describes how to turn what might seem an incomprehensible 'black box' PC into a powerful and enjoyable tool that can help you in all areas of your work and leisure. With plenty of handy

Computations in plasma physics

International Nuclear Information System (INIS)

Cohen, B.I.; Killeen, J.

1984-01-01

A review of computer application in plasma physics is presented. Computer contribution to the investigation of magnetic and inertial confinement of a plasma and charged particle beam propagation is described. Typical utilization of computer for simulation and control of laboratory and cosmic experiments with a plasma and for data accumulation in these experiments is considered. Basic computational methods applied in plasma physics are discussed. Future trends of computer utilization in plasma reseaches are considered in terms of an increasing role of microprocessors and high-speed data plotters and the necessity of more powerful computer application

Status of GRACE system - automatic computation of cross sections

International Nuclear Information System (INIS)

Fujimoto, J.; Ishikawa, T.; Kawabata, S.; Kurihara, Y.; Shimizu, Y.; Kato, K.; Nakazawa, N.; Kaneko, T.; Tanaka, H.

1995-01-01

Automated system is an essential tool for high-energy physics and GRACE system for tree processes makes it possible to calculate cross sections for complicated processes exactly. To check the output of the automatic system we make comparison between Hooft-t-Feynman gauge and unitary gauge, the exchange of external particles, and we check the independence of UV divergence parameter and that of IR divergence parameter

Vanderbilt University: Campus Computing Environment.

Science.gov (United States)

CAUSE/EFFECT, 1988

1988-01-01

Despite the decentralized nature of computing at Vanderbilt, there is significant evidence of cooperation and use of each other's resources by the various computing entities. Planning for computing occurs in every school and department. Caravan, a campus-wide network, is described. (MLW)

One-, two- and three-dimensional transport codes using multi-group double-differential form cross sections

International Nuclear Information System (INIS)

Mori, Takamasa; Nakagawa, Masayuki; Sasaki, Makoto.

1988-11-01

We have developed a group of computer codes to realize the accurate transport calculation by using the multi-group double-differential form cross section. This type of cross section can correctly take account of the energy-angle correlated reaction kinematics. Accordingly, the transport phenomena in materials with highly anisotropic scattering are accurately calculated by using this cross section. They include the following four codes or code systems: PROF-DD : a code system to generate the multi-group double-differential form cross section library by processing basic nuclear data file compiled in the ENDF / B-IV or -V format, ANISN-DD : a one-dimensional transport code based on the discrete ordinate method, DOT-DD : a two-dimensional transport code based on the discrete ordinate method, MORSE-DD : a three-dimensional transport code based on the Monte Carlo method. In addition to these codes, several auxiliary codes have been developed to process calculated results. This report describes the calculation algorithm employed in these codes and how to use them. (author)

Computational sustainability

CERN Document Server

Kersting, Kristian; Morik, Katharina

2016-01-01

The book at hand gives an overview of the state of the art research in Computational Sustainability as well as case studies of different application scenarios. This covers topics such as renewable energy supply, energy storage and e-mobility, efficiency in data centers and networks, sustainable food and water supply, sustainable health, industrial production and quality, etc. The book describes computational methods and possible application scenarios.

Computer tomographs

International Nuclear Information System (INIS)

Niedzwiedzki, M.

1982-01-01

Physical foundations and the developments in the transmission and emission computer tomography are presented. On the basis of the available literature and private communications a comparison is made of the various transmission tomographs. A new technique of computer emission tomography ECT, unknown in Poland, is described. The evaluation of two methods of ECT, namely those of positron and single photon emission tomography is made. (author)

Neutron slowing down and transport in monoisotopic media with constant cross sections or with a square-well minimum

International Nuclear Information System (INIS)

Peng, W.H.

1977-01-01

A specialized moments-method computer code was constructed for the calculation of the even spatial moments of the scalar flux, phi/sub 2n/, through 2n = 80. Neutron slowing-down and transport in a medium with constant cross sections was examined and the effect of a superimposed square-well cross section minimum on the penetrating flux was studied. In the constant cross section case, for nuclei that are not too light, the scalar flux is essentially independent of the nuclide mass. The numerical results obtained were used to test the validity of existing analytic approximations to the flux at both small and large lethargies relative to the source energy. As a result it was possible to define the regions in the lethargy--distance plane where these analytic solutions apply with reasonable accuracy. A parametric study was made of the effect of a square-well cross section minimum on neutron fluxes at energies below the minimum. It was shown that the flux at energies well below the minimum is essentially independent of the position of the minimum in lethargy. The results can be described by a convolution-of-sources model involving only the lethargy separation between detector and source, the width and the relative depth of the minimum. On the basis of the computations and the corresponding model, it is possible to predict, e.g., the conditions under which transport in the region of minimum completely determines the penetrating flux. At the other extreme, the model describes when the transport in the minimum can be treated in the same manner as in any comparable lethargy interval. With the aid of these criteria it is possible to understand the apparent paradoxical effects of certain minima in neutron penetration through such media as iron and sodium

47 CFR 32.2124 - General purpose computers.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false General purpose computers. 32.2124 Section 32... General purpose computers. (a) This account shall include the original cost of computers and peripheral... financial, statistical, or other business analytical reports; preparation of payroll, customer bills, and...

Abstract quantum computing machines and quantum computational logics

Science.gov (United States)

Chiara, Maria Luisa Dalla; Giuntini, Roberto; Sergioli, Giuseppe; Leporini, Roberto

2016-06-01

Classical and quantum parallelism are deeply different, although it is sometimes claimed that quantum Turing machines are nothing but special examples of classical probabilistic machines. We introduce the concepts of deterministic state machine, classical probabilistic state machine and quantum state machine. On this basis, we discuss the question: To what extent can quantum state machines be simulated by classical probabilistic state machines? Each state machine is devoted to a single task determined by its program. Real computers, however, behave differently, being able to solve different kinds of problems. This capacity can be modeled, in the quantum case, by the mathematical notion of abstract quantum computing machine, whose different programs determine different quantum state machines. The computations of abstract quantum computing machines can be linguistically described by the formulas of a particular form of quantum logic, termed quantum computational logic.

Computed tomography for radiographers

International Nuclear Information System (INIS)

Brooker, M.J.

1986-01-01

This book is directed towards giving radiographers an introduction to and basic knowledge of computerized tomography. The technical section discusses gantries and x-ray production, computer and disc drive image display, storage, artefacts quality assurance and design of departments. The clinical section includes patient preparation, radiotherapy planning, and interpretation of images from various areas of the anatomy. (U.K.)

Parallel computing works!

CERN Document Server

Fox, Geoffrey C; Messina, Guiseppe C

2014-01-01

A clear illustration of how parallel computers can be successfully appliedto large-scale scientific computations. This book demonstrates how avariety of applications in physics, biology, mathematics and other scienceswere implemented on real parallel computers to produce new scientificresults. It investigates issues of fine-grained parallelism relevant forfuture supercomputers with particular emphasis on hypercube architecture. The authors describe how they used an experimental approach to configuredifferent massively parallel machines, design and implement basic systemsoftware, and develop

Discrete computational structures

CERN Document Server

Korfhage, Robert R

1974-01-01

Discrete Computational Structures describes discrete mathematical concepts that are important to computing, covering necessary mathematical fundamentals, computer representation of sets, graph theory, storage minimization, and bandwidth. The book also explains conceptual framework (Gorn trees, searching, subroutines) and directed graphs (flowcharts, critical paths, information network). The text discusses algebra particularly as it applies to concentrates on semigroups, groups, lattices, propositional calculus, including a new tabular method of Boolean function minimization. The text emphasize

`95 computer system operation project

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Taek; Lee, Hae Cho; Park, Soo Jin; Kim, Hee Kyung; Lee, Ho Yeun; Lee, Sung Kyu; Choi, Mi Kyung [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-12-01

This report describes overall project works related to the operation of mainframe computers, the management of nuclear computer codes and the project of nuclear computer code conversion. The results of the project are as follows ; 1. The operation and maintenance of the three mainframe computers and other utilities. 2. The management of the nuclear computer codes. 3. The finishing of the computer codes conversion project. 26 tabs., 5 figs., 17 refs. (Author) .new.

'95 computer system operation project

International Nuclear Information System (INIS)

Kim, Young Taek; Lee, Hae Cho; Park, Soo Jin; Kim, Hee Kyung; Lee, Ho Yeun; Lee, Sung Kyu; Choi, Mi Kyung

1995-12-01

This report describes overall project works related to the operation of mainframe computers, the management of nuclear computer codes and the project of nuclear computer code conversion. The results of the project are as follows ; 1. The operation and maintenance of the three mainframe computers and other utilities. 2. The management of the nuclear computer codes. 3. The finishing of the computer codes conversion project. 26 tabs., 5 figs., 17 refs. (Author) .new

Computer tomography in otolaryngology

International Nuclear Information System (INIS)

Gradzki, J.

1981-01-01

The principles of design and the action of computer tomography which was applied also for the diagnosis of nose, ear and throat diseases are discussed. Computer tomography makes possible visualization of the structures of the nose, nasal sinuses and facial skeleton in transverse and eoronal planes. The method enables an accurate evaluation of the position and size of neoplasms in these regions and differentiation of inflammatory exudates against malignant masses. In otology computer tomography is used particularly in the diagnosis of pontocerebellar angle tumours and otogenic brain abscesses. Computer tomography of the larynx and pharynx provides new diagnostic data owing to the possibility of obtaining transverse sections and visualization of cartilage. Computer tomograms of some cases are presented. (author)

Sectional localization of a small hepatocellular carcinoma in the right hepatic lobe by computed tomography: Comparison between the conventional and portal vein tracing methods

Energy Technology Data Exchange (ETDEWEB)

Zhou, Chun-Gao [Seoul National University Hospital, Department of Radiology, Jongro-gu, Seoul (Korea, Republic of); The First Affiliated Hospital of Nanjing Medical University, Department of Interventional Radiology, Nanjing (China); Chung, Jin Wook; Hur, Saebeom; Lee, Myungsu; Kim, Hyo-Cheol; Jae, Hwan Jun; Yin, Yong-Hu; Kim, Young Il [Seoul National University Hospital, Department of Radiology, Jongro-gu, Seoul (Korea, Republic of); Ahn, Sang-bu [Dongnam Institution of Radiological and Medical Sciences, Department of Radiology, Busan (Korea, Republic of); Cho, Baik Hwan [Chonbuk National University Hospital, Department of Radiology, Jeonju (Korea, Republic of)

2016-12-15

To compare the accuracy of the conventional and portal vein tracing methods in the right hepatic lobe in multidetector computed tomography (MDCT). This retrospective study included patients with hepatocellular carcinoma (HCC) lesions in the right hepatic lobe who underwent multiphasic MDCT and C-arm CT hepatic arteriography (C-arm CTHA) for chemoembolization. The accuracies of the conventional and portal vein tracing methods were evaluated using C-arm CTHA as the gold standard. A total of 147 patients with 205 HCC nodules were included. The C-arm CTHA could identify all the tumour-feeding arteries and consequently demonstrated that 120 lesions were located in the anterior section, 78 in the posterior section, and 7 in the border zone. The accuracy rates of conventional vs. portal vein tracing methods were 71.7 % vs. 98.3 % for the anterior section lesions, 67.9 % vs. 96.2 % for the posterior section, and 28.6 % vs. 57.1 % for the border zone. The portal vein tracing method was more accurate than the conventional method (P<0.001). The portal vein tracing method should be used for sectional localization of HCCs in the right lobe, because it predicts the location more accurately than the conventional method. (orig.)

12 CFR 978.8 - Computer data.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Computer data. 978.8 Section 978.8 Banks and... REQUESTS FOR INFORMATION § 978.8 Computer data. Nothing in this part shall preclude a Bank from arranging... consent of such agency by means of an electronic computer system. Any such arrangement shall ensure the...

12 CFR 908.27 - Computing time.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Computing time. 908.27 Section 908.27 Banks and... PRACTICE AND PROCEDURE IN HEARINGS ON THE RECORD General Rules § 908.27 Computing time. (a) General rule. In computing any period of time prescribed or allowed by this subpart, the date of the act or event...

The Polyakov, Nambu and Jona-Lasinio model and its applications to describe the sub-nuclear particles

International Nuclear Information System (INIS)

Blanquier, E.

2013-01-01

To study the high energy nuclear physics and the associated phenomenon, as the quark-gluon plasma / hadronic matter phase transition, the Nambu and Jona-Lasinio model (NJL) appears as an interesting alternative to the Quantum Chromodynamics, not solvable at the considered energies. Indeed, the NJL model allows the description of quarks physics, at finite temperatures and densities. Furthermore, in order to try to correct a limitation of the NJL model, i.e. the absence of confinement, it was proposed a coupling of the quarks/antiquarks to a Polyakov loop, forming the PNJL model. The objective of this thesis is to see the possibilities offered by the NJL and PNJL models, to describe relevant sub-nuclear particles (quarks, mesons, diquarks and baryons), to study their interactions, and to proceed to a dynamical study involving these particles. After a recall of the useful tools, we modeled the u, d, s effective quarks and the mesons. Then, we described the baryons as quarks-diquarks bound states. A part of the work concerned the calculations of the cross-sections associated to the possible reactions implying these particles. Then, we incorporated these results in a computer code, in order to study the cooling of a quarks/antiquarks plasma and its hadronization. In this study, each particle evolves in a system in which the temperature and the densities are local parameters. We have two types of interactions: one due to the collisions, and the other is a remote interaction, notably between quarks. Finally, we studied the properties of our approach: qualities, limitations, and possible evolutions. (author)

21 CFR 870.1425 - Programmable diagnostic computer.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Programmable diagnostic computer. 870.1425 Section 870.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... diagnostic computer. (a) Identification. A programmable diagnostic computer is a device that can be...

2012 International Conference on Teaching and Computational Science (ICTCS 2012)

CERN Document Server

Advanced Technology in Teaching

2013-01-01

2012 International Conference on Teaching and Computational Science (ICTCS 2012) is held on April 1-2, 2012, Macao.   This volume contains 120 selected papers presented at 2012 International Conference on Teaching and Computational Science (ICTCS 2012), which is to bring together researchers working in many different areas of teaching and computational Science to foster international collaborations and exchange of new ideas.   This volume book can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with teaching. The second section of this volume consists of computational Science.   We hope that all the papers here published can benefit you in the related researching fields.

Total cross sections for heavy flavour production at HERA

CERN Document Server

Frixione, Stefano; Nason, P; Ridolfi, G; Frixione, S; Mangano, M L; Nason, P; Ridolfi, G

1995-01-01

We compute total cross sections for charm and bottom photoproduction at HERA energies, and discuss the relevant theoretical uncertainties. In particular we discuss the problems arising from the small-x region, the uncertainties in the gluon parton density, and the uncertainties in the hadronic component of the cross section. Total electroproduction cross sections, calculated in the Weizs\\"acker-Williams approximation, are also given.

Selecting Personal Computers.

Science.gov (United States)

Djang, Philipp A.

1993-01-01

Describes a Multiple Criteria Decision Analysis Approach for the selection of personal computers that combines the capabilities of Analytic Hierarchy Process and Integer Goal Programing. An example of how decision makers can use this approach to determine what kind of personal computers and how many of each type to purchase is given. (nine…

The experimental test of the adequateness of relativistic impulse approximation when describing the lightest nuclei break-up

International Nuclear Information System (INIS)

Sitnik, I.M.

1995-01-01

The behaviour of the lightest nuclei break-up cross sections at zero angle has been analyzed in vicinity of the maximum. It is shown that asymmetry of cross sections relatively maximum is in conflict with nonrelativistic impulse approximation, but agrees well with one of relativistic approaches to describe this process. 10 refs., 9 figs

Keratitis caused by the recently described new species Aspergillus brasiliensis: two case reports

Directory of Open Access Journals (Sweden)

Vágvölgyi Csaba

2010-02-01

Full Text Available Abstract Introduction Human infections caused by Aspergillus brasiliensis have not yet been reported. We describe the first two known cases of fungal keratitis caused by Aspergillus brasiliensis. Case presentations A 49-year-old Indian Tamil woman agricultural worker came with pain and defective vision in the right eye for one month. Meanwhile, a 35-year-old Indian Tamil woman presented with a history of a corneal ulcer involving the left eye for 15 days. The fungal strains isolated from these two cases were originally suspected to belong to Aspergillus section Nigri based on macro- and micromorphological characteristics. Molecular identification revealed that both isolates represent A. brasiliensis. Conclusion The two A. brasiliensis strains examined in this study were part of six keratitis isolates from Aspergillus section Nigri, suggesting that this recently described species may be responsible for a significant proportion of corneal infections caused by black Aspergilli. The presented cases also indicate that significant differences may occur between the severities of keratitis caused by individual isolates of A. brasiliensis.

Bacterial computing with engineered populations.

Science.gov (United States)

Amos, Martyn; Axmann, Ilka Maria; Blüthgen, Nils; de la Cruz, Fernando; Jaramillo, Alfonso; Rodriguez-Paton, Alfonso; Simmel, Friedrich

2015-07-28

We describe strategies for the construction of bacterial computing platforms by describing a number of results from the recently completed bacterial computing with engineered populations project. In general, the implementation of such systems requires a framework containing various components such as intracellular circuits, single cell input/output and cell-cell interfacing, as well as extensive analysis. In this overview paper, we describe our approach to each of these, and suggest possible areas for future research. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

29 CFR 541.401 - Computer manufacture and repair.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Computer manufacture and repair. 541.401 Section 541.401... SALES EMPLOYEES Computer Employees § 541.401 Computer manufacture and repair. The exemption for employees in computer occupations does not include employees engaged in the manufacture or repair of...

Large Scale Computing and Storage Requirements for High Energy Physics

Energy Technology Data Exchange (ETDEWEB)

Gerber, Richard A.; Wasserman, Harvey

2010-11-24

The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility for the Department of Energy's Office of Science, providing high-performance computing (HPC) resources to more than 3,000 researchers working on about 400 projects. NERSC provides large-scale computing resources and, crucially, the support and expertise needed for scientists to make effective use of them. In November 2009, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR), and DOE's Office of High Energy Physics (HEP) held a workshop to characterize the HPC resources needed at NERSC to support HEP research through the next three to five years. The effort is part of NERSC's legacy of anticipating users needs and deploying resources to meet those demands. The workshop revealed several key points, in addition to achieving its goal of collecting and characterizing computing requirements. The chief findings: (1) Science teams need access to a significant increase in computational resources to meet their research goals; (2) Research teams need to be able to read, write, transfer, store online, archive, analyze, and share huge volumes of data; (3) Science teams need guidance and support to implement their codes on future architectures; and (4) Projects need predictable, rapid turnaround of their computational jobs to meet mission-critical time constraints. This report expands upon these key points and includes others. It also presents a number of case studies as representative of the research conducted within HEP. Workshop participants were asked to codify their requirements in this case study format, summarizing their science goals, methods of solution, current and three-to-five year computing requirements, and software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, multi-core environment that is expected to dominate HPC architectures over the next few years

Partnership in Computational Science

Energy Technology Data Exchange (ETDEWEB)

Huray, Paul G.

1999-02-24

This is the final report for the "Partnership in Computational Science" (PICS) award in an amount of $500,000 for the period January 1, 1993 through December 31, 1993. A copy of the proposal with its budget is attached as Appendix A. This report first describes the consequent significance of the DOE award in building infrastructure of high performance computing in the Southeast and then describes the work accomplished under this grant and a list of publications resulting from it.

Two-loop corrections to the triple Higgs boson production cross section

Energy Technology Data Exchange (ETDEWEB)

Florian, Daniel de [International Center for Advanced Studies (ICAS), ECyT-UNSAM, Campus Miguelete, 25 de Mayo y Francia (1650) Buenos Aires (Argentina); Mazzitelli, Javier [International Center for Advanced Studies (ICAS), ECyT-UNSAM, Campus Miguelete, 25 de Mayo y Francia (1650) Buenos Aires (Argentina); Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057 Zürich (Switzerland)

2017-02-22

In this paper we compute the QCD corrections for the triple Higgs boson production cross section via gluon fusion, within the heavy-top approximation. We present, for the first time, analytical results for the next-to-leading order corrections, and also compute the soft and virtual contributions of the next-to-next-to-leading order cross section. We provide predictions for the total cross section and the triple Higgs invariant mass distribution. We find that the QCD corrections are large at both perturbative orders, and that the scale uncertainty is substantially reduced when the second order perturbative corrections are included.

Applications of industrial computed tomography at Los Alamos Scientific Laboratory

International Nuclear Information System (INIS)

Kruger, R.P.; Morris, R.A.; Wecksung, G.W.

1980-01-01

A research and development program was begun three years ago at the Los Alamos Scientific Laboratory (LASL) to study nonmedical applications of computed tomography. This program had several goals. The first goal was to develop the necessary reconstruction algorithms to accurately reconstruct cross sections of nonmedical industrial objects. The second goal was to be able to perform extensive tomographic simulations to determine the efficacy of tomographic reconstruction with a variety of hardware configurations. The final goal was to construct an inexpensive industrial prototype scanner with a high degree of design flexibility. The implementation of these program goals is described

Lidar cross-sections of soot fractal aggregates: Assessment of equivalent-sphere models

Science.gov (United States)

Ceolato, Romain; Gaudfrin, Florian; Pujol, Olivier; Riviere, Nicolas; Berg, Matthew J.; Sorensen, Christopher M.

2018-06-01

This work assesses the ability of equivalent-sphere models to reproduce the optical properties of soot aggregates relevant for lidar remote sensing, i.e. the backscattering and extinction cross sections. Lidar cross-sections are computed with a spectral discrete dipole approximation model over the visible-to-infrared (400-5000 nm) spectrum and compared with equivalent-sphere approximations. It is shown that the equivalent-sphere approximation, applied to fractal aggregates, has a limited ability to calculate such cross-sections well. The approximation should thus be used with caution for the computation of broadband lidar cross-sections, especially backscattering, at small and intermediate wavelengths (e.g. UV to visible).

Computing in Research.

Science.gov (United States)

Ashenhurst, Robert L.

The introduction and diffusion of automatic computing facilities during the 1960's is reviewed; it is described as a time when research strategies in a broad variety of disciplines changed to take advantage of the newfound power provided by the computer. Several types of typical problems encountered by researchers who adopted the new technologies,…

Intelligent systems and soft computing for nuclear science and industry

International Nuclear Information System (INIS)

Ruan, D.; D'hondt, P.; Govaerts, P.; Kerre, E.E.

1996-01-01

The second international workshop on Fuzzy Logic and Intelligent Technologies in Nuclear Science (FLINS) addresses topics related to intelligent systems and soft computing for nuclear science and industry. The proceedings contain 52 papers in different fields such as radiation protection, nuclear safety (human factors and reliability), safeguards, nuclear reactor control, production processes in the fuel cycle, dismantling, waste and disposal, decision making, and nuclear reactor control. A clear link is made between theory and applications of fuzzy logic such as neural networks, expert systems, robotics, man-machine interfaces, and decision-support techniques by using modern and advanced technologies and tools. The papers are grouped in three sections. The first section (Soft computing techniques) deals with basic tools to treat fuzzy logic, neural networks, genetic algorithms, decision-making, and software used for general soft-computing aspects. The second section (Intelligent engineering systems) includes contributions on engineering problems such as knowledge-based engineering, expert systems, process control integration, diagnosis, measurements, and interpretation by soft computing. The third section (Nuclear applications) focusses on the application of soft computing and intelligent systems in nuclear science and industry

Computer-Mediated Communications Systems: Will They Catch On?

Science.gov (United States)

Cook, Dave; Ridley, Michael

1990-01-01

Describes the use of CoSy, a computer conferencing system, by academic librarians at McMaster University in Ontario. Computer-mediated communications systems (CMCS) are discussed, the use of the system for electronic mail and computer conferencing is described, the perceived usefulness of CMCS is examined, and a sidebar explains details of the…

Computer codes for evaluation of control room habitability (HABIT)

International Nuclear Information System (INIS)

Stage, S.A.

1996-06-01

This report describes the Computer Codes for Evaluation of Control Room Habitability (HABIT). HABIT is a package of computer codes designed to be used for the evaluation of control room habitability in the event of an accidental release of toxic chemicals or radioactive materials. Given information about the design of a nuclear power plant, a scenario for the release of toxic chemicals or radionuclides, and information about the air flows and protection systems of the control room, HABIT can be used to estimate the chemical exposure or radiological dose to control room personnel. HABIT is an integrated package of several programs that previously needed to be run separately and required considerable user intervention. This report discusses the theoretical basis and physical assumptions made by each of the modules in HABIT and gives detailed information about the data entry windows. Sample runs are given for each of the modules. A brief section of programming notes is included. A set of computer disks will accompany this report if the report is ordered from the Energy Science and Technology Software Center. The disks contain the files needed to run HABIT on a personal computer running DOS. Source codes for the various HABIT routines are on the disks. Also included are input and output files for three demonstration runs

Nosocomial Infections Transmitted Via Computers : A Literature Review

OpenAIRE

Atanda, Angela Achieng; Nwaoha, Nkechi Naomi

2010-01-01

The purpose of this review was to discuss how current literature described nosocomial infections transmitted via computers in hospitals. It also described the various methods used to disinfect computers. The research questions in this study were; What are nosocomial infections? How do contaminated computer devices transmit nosocomial infections? and What infection control methods are applied to decontaminate computers within hospitals? The aim of conducting this study was to create an aw...

Photoionization cross section by Stieltjes imaging applied to coupled cluster Lanczos pseudo-spectra

Energy Technology Data Exchange (ETDEWEB)

Cukras, Janusz; Coriani, Sonia; Decleva, Piero [Dipartimento di Scienze Chimiche e Farmaceutiche, Università degli Studi di Trieste, via L. Giorgieri 1, I-34127 Trieste (Italy); Christiansen, Ove [Department of Chemistry, Aarhus University, DK-8000 Aarhus C (Denmark); Norman, Patrick [Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping (Sweden)

2013-09-07

A recently implemented asymmetric Lanczos algorithm for computing (complex) linear response functions within the coupled cluster singles (CCS), coupled cluster singles and iterative approximate doubles (CC2), and coupled cluster singles and doubles (CCSD) is coupled to a Stieltjes imaging technique in order to describe the photoionization cross section of atoms and molecules, in the spirit of a similar procedure recently proposed by Averbukh and co-workers within the Algebraic Diagrammatic Construction approach. Pilot results are reported for the atoms He, Ne, and Ar and for the molecules H{sub 2}, H{sub 2}O, NH{sub 3}, HF, CO, and CO{sub 2}.

An exact formula to describe the amplification process in a photomultiplier tube

International Nuclear Information System (INIS)

Rademacker, Jonas

2002-01-01

An analytical function is derived that exactly describes the amplification process due to a series of discrete, Poisson-like amplifications like those in a photo multiplier tube (PMT). A numerical recipe is provided that implements this function as a computer program. It is shown how the program can be used as the core element of a faster, simplified routine to fit PMT spectra with high efficiency. The functionality of the method is demonstrated by fitting both, Monte Carlo generated and measured PMT spectra

FPGA-accelerated simulation of computer systems

CERN Document Server

Angepat, Hari; Chung, Eric S; Hoe, James C; Chung, Eric S

2014-01-01

To date, the most common form of simulators of computer systems are software-based running on standard computers. One promising approach to improve simulation performance is to apply hardware, specifically reconfigurable hardware in the form of field programmable gate arrays (FPGAs). This manuscript describes various approaches of using FPGAs to accelerate software-implemented simulation of computer systems and selected simulators that incorporate those techniques. More precisely, we describe a simulation architecture taxonomy that incorporates a simulation architecture specifically designed f

Social Play at the Computer: Preschoolers Scaffold and Support Peers' Computer Competence.

Science.gov (United States)

Freeman, Nancy K.; Somerindyke, Jennifer

2001-01-01

Describes preschoolers' collaboration during free play in a computer lab, focusing on the computer's contribution to active, peer-mediated learning. Discusses these observations in terms of Parten's insights on children's social play and Vygotsky's socio-cultural learning theory, noting that the children scaffolded each other's growing computer…

Magnetic fusion energy and computers: the role of computing in magnetic fusion energy research and development

International Nuclear Information System (INIS)

1979-10-01

This report examines the role of computing in the Department of Energy magnetic confinement fusion program. The present status of the MFECC and its associated network is described. The third part of this report examines the role of computer models in the main elements of the fusion program and discusses their dependence on the most advanced scientific computers. A review of requirements at the National MFE Computer Center was conducted in the spring of 1976. The results of this review led to the procurement of the CRAY 1, the most advanced scientific computer available, in the spring of 1978. The utilization of this computer in the MFE program has been very successful and is also described in the third part of the report. A new study of computer requirements for the MFE program was conducted during the spring of 1979 and the results of this analysis are presented in the forth part of this report

An introduction to digital computing

CERN Document Server

George, F H

2014-01-01

An Introduction to Digital Computing provides information pertinent to the fundamental aspects of digital computing. This book represents a major step towards the universal availability of programmed material.Organized into four chapters, this book begins with an overview of the fundamental workings of the computer, including the way it handles simple arithmetic problems. This text then provides a brief survey of the basic features of a typical computer that is divided into three sections, namely, the input and output system, the memory system for data storage, and a processing system. Other c

Computational genomics of hyperthermophiles

NARCIS (Netherlands)

Werken, van de H.J.G.

2008-01-01

With the ever increasing number of completely sequenced prokaryotic genomes and the subsequent use of functional genomics tools, e.g. DNA microarray and proteomics, computational data analysis and the integration of microbial and molecular data is inevitable. This thesis describes the computational

Argonne's Laboratory Computing Resource Center 2009 annual report.

Energy Technology Data Exchange (ETDEWEB)

Bair, R. B. (CLS-CI)

2011-05-13

Now in its seventh year of operation, the Laboratory Computing Resource Center (LCRC) continues to be an integral component of science and engineering research at Argonne, supporting a diverse portfolio of projects for the U.S. Department of Energy and other sponsors. The LCRC's ongoing mission is to enable and promote computational science and engineering across the Laboratory, primarily by operating computing facilities and supporting high-performance computing application use and development. This report describes scientific activities carried out with LCRC resources in 2009 and the broad impact on programs across the Laboratory. The LCRC computing facility, Jazz, is available to the entire Laboratory community. In addition, the LCRC staff provides training in high-performance computing and guidance on application usage, code porting, and algorithm development. All Argonne personnel and collaborators are encouraged to take advantage of this computing resource and to provide input into the vision and plans for computing and computational analysis at Argonne. The LCRC Allocations Committee makes decisions on individual project allocations for Jazz. Committee members are appointed by the Associate Laboratory Directors and span a range of computational disciplines. The 350-node LCRC cluster, Jazz, began production service in April 2003 and has been a research work horse ever since. Hosting a wealth of software tools and applications and achieving high availability year after year, researchers can count on Jazz to achieve project milestones and enable breakthroughs. Over the years, many projects have achieved results that would have been unobtainable without such a computing resource. In fiscal year 2009, there were 49 active projects representing a wide cross-section of Laboratory research and almost all research divisions.

Sectional microprocessor based microcomputer and its application to express analysis using interactive language

International Nuclear Information System (INIS)

Lang, I.; Leveleki, L.; Salai, M.; Turani, D.

1984-01-01

Sectional microprocessor TPA-L/128H based mini-computer being a part of the TPA-8 computer family is developed. A substantial increase of the computer operation rate is attained at the expense of microprogram monitoring. The central processor is constructed on the base of the AM2900 sectional microprocessor elements. The TPA-L/128H computer is program compatible with TPA-8 computer, perfectly equipped with software: high level languages as well as OS/L, COS/H, RTS/H, PAL/128, WPS, TEASYS-8 and IL 128 ensuring statistical data processing, physical experiments automation and interactive experimental data processing. The real time basis problems and CAMAC devices monitoring are efficiently solved

Local health department epidemiologic capacity: a stratified cross-sectional assessment describing the quantity, education, training, and perceived competencies of epidemiologic staff.

Science.gov (United States)

O'Keefe, Kaitlin A; Shafir, Shira C; Shoaf, Kimberley I

2013-01-01

Local health departments (LHDs) must have sufficient numbers of staff functioning in an epidemiologic role with proper education, training, and skills to protect the health of communities they serve. This pilot study was designed to describe the composition, training, and competency level of LHD staff and examine the hypothesis that potential disparities exist between LHDs serving different sized populations. Cross-sectional surveys were conducted with directors and epidemiologic staff from a sample of 100 LHDs serving jurisdictions of varied sizes. Questionnaires included inquiries regarding staff composition, education, training, and measures of competency modeled on previously conducted studies by the Council of State and Territorial Epidemiologists. Number of epidemiologic staff, academic degree distribution, epidemiologic training, and both director and staff confidence in task competencies were calculated for each LHD size strata. Disparities in measurements were observed in LHDs serving different sized populations. LHDs serving small populations reported a smaller average number of epidemiologic staff than those serving larger jurisdictions. As size of population served increased, percentages of staff and directors holding bachelors' and masters' degrees increased, while those holding RN degrees decreased. A higher degree of perceived competency of staff in most task categories was reported in LHDs serving larger populations. LHDs serving smaller populations reported fewer epidemiologic staff, therefore might benefit from additional resources. Differences observed in staff education, training, and competencies suggest that enhanced epidemiologic training might be particularly needed in LHDs serving smaller populations. RESULTS can be used as a baseline for future research aimed at identifying areas where training and personnel resources might be particularly needed to increase the capabilities of LHDs.

Symbolic computation with finite biquandles

OpenAIRE

Creel, Conrad; Nelson, Sam

2007-01-01

A method of computing a basis for the second Yang-Baxter cohomology of a finite biquandle with coefficients in Q and Z_p from a matrix presentation of the finite biquandle is described. We also describe a method for computing the Yang-Baxter cocycle invariants of an oriented knot or link represented as a signed Gauss code. We provide a URL for our Maple implementations of these algorithms.

Computer science a concise introduction

CERN Document Server

Sinclair, Ian

2014-01-01

Computer Science: A Concise Introduction covers the fundamentals of computer science. The book describes micro-, mini-, and mainframe computers and their uses; the ranges and types of computers and peripherals currently available; applications to numerical computation; and commercial data processing and industrial control processes. The functions of data preparation, data control, computer operations, applications programming, systems analysis and design, database administration, and network control are also encompassed. The book then discusses batch, on-line, and real-time systems; the basic

21 CFR 870.1110 - Blood pressure computer.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Blood pressure computer. 870.1110 Section 870.1110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... computer. (a) Identification. A blood pressure computer is a device that accepts the electrical signal from...

Computational technologies a first course

CERN Document Server

Borisov, Victor S; Grigoriev, Aleksander V 1; Kolesov, Alexandr E 1; Popov, Petr A 1; Sirditov, Ivan K 1; Vabishchevich, Petr N 1; Vasilieva, Maria V 1; Zakharov, Petr E 1; Vabishchevich, Petr N 0

2015-01-01

In this book we describe the basic elements of present computational technologies that use the algorithmic languages C/C++. The emphasis is on GNU compilers and libraries, FOSS for the solution of computational mathematics problems and visualization of the obtained data. Many examples illustrate the basic features of computational technologies.

Massively parallel quantum computer simulator

NARCIS (Netherlands)

De Raedt, K.; Michielsen, K.; De Raedt, H.; Trieu, B.; Arnold, G.; Richter, M.; Lippert, Th.; Watanabe, H.; Ito, N.

2007-01-01

We describe portable software to simulate universal quantum computers on massive parallel Computers. We illustrate the use of the simulation software by running various quantum algorithms on different computer architectures, such as a IBM BlueGene/L, a IBM Regatta p690+, a Hitachi SR11000/J1, a Cray

Verification and validation of predictive computer programs describing the near and far-field chemistry of radioactive waste disposal systems

International Nuclear Information System (INIS)

Read, D.; Broyd, T.W.

1988-01-01

This paper provides an introduction to CHEMVAL, an international project concerned with establishing the applicability of chemical speciation and coupled transport models to the simulation of realistic waste disposal situations. The project aims to validate computer-based models quantitatively by comparison with laboratory and field experiments. Verification of the various computer programs employed by research organisations within the European Community is ensured through close inter-laboratory collaboration. The compilation and review of thermodynamic data forms an essential aspect of this work and has led to the production of an internally consistent standard CHEMVAL database. The sensitivity of results to variation in fundamental constants is being monitored at each stage of the project and, where feasible, complementary laboratory studies are used to improve the data set. Currently, thirteen organisations from five countries are participating in CHEMVAL which forms part of the Commission of European Communities' MIRAGE 2 programme of research. (orig.)

Effects of Psychology Courseware Use on Computer Anxiety in Students.

Science.gov (United States)

Lambert, Matthew E.; Lenthall, Gerard

1989-01-01

Describes study that examined the relationship between computer anxiety and the use of psychology courseware in an undergraduate abnormal psychology class using four computerized case simulations. Comparisons of pretest and posttest computer anxiety measures are described, and the relationship between computer anxiety/attitudes and computer use is…

Model calculations as one means of satisfying the neutron cross-section requirements of the CTR program

International Nuclear Information System (INIS)

Gardner, D.G.

1975-01-01

A large amount of cross section and spectral information for neutron-induced reactions will be required for the CTR design program. To undertake to provide the required data through a purely experimental measurement program alone may not be the most efficient way of attacking the problem. It is suggested that a preliminary theoretical calculation be made of all relevant reactions on the dozen or so elements that now seem to comprise the inventory of possible construction materials to find out which are actually important, and over what energy ranges they are important. A number of computer codes for calculating cross sections for neutron induced reactions have been evaluated and extended. These will be described and examples will be given of various types of calculations of interest to the CTR program. (U.S.)

High performance computing and communications: FY 1996 implementation plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-16

The High Performance Computing and Communications (HPCC) Program was formally authorized by passage of the High Performance Computing Act of 1991, signed on December 9, 1991. Twelve federal agencies, in collaboration with scientists and managers from US industry, universities, and research laboratories, have developed the Program to meet the challenges of advancing computing and associated communications technologies and practices. This plan provides a detailed description of the agencies` HPCC implementation plans for FY 1995 and FY 1996. This Implementation Plan contains three additional sections. Section 3 provides an overview of the HPCC Program definition and organization. Section 4 contains a breakdown of the five major components of the HPCC Program, with an emphasis on the overall directions and milestones planned for each one. Section 5 provides a detailed look at HPCC Program activities within each agency.

Cloud computing basics for librarians.

Science.gov (United States)

Hoy, Matthew B

2012-01-01

"Cloud computing" is the name for the recent trend of moving software and computing resources to an online, shared-service model. This article briefly defines cloud computing, discusses different models, explores the advantages and disadvantages, and describes some of the ways cloud computing can be used in libraries. Examples of cloud services are included at the end of the article. Copyright © Taylor & Francis Group, LLC

Computing Moment-Based Probability Tables for Self-Shielding Calculations in Lattice Codes

International Nuclear Information System (INIS)

Hebert, Alain; Coste, Mireille

2002-01-01

As part of the self-shielding model used in the APOLLO2 lattice code, probability tables are required to compute self-shielded cross sections for coarse energy groups (typically with 99 or 172 groups). This paper describes the replacement of the multiband tables (typically with 51 subgroups) with moment-based tables in release 2.5 of APOLLO2. An improved Ribon method is proposed to compute moment-based probability tables, allowing important savings in CPU resources while maintaining the accuracy of the self-shielding algorithm. Finally, a validation is presented where the absorption rates obtained with each of these techniques are compared with exact values obtained using a fine-group elastic slowing-down calculation in the resolved energy domain. Other results, relative to the Rowland's benchmark and to three assembly production cases, are also presented

Computer security

CERN Document Server

Gollmann, Dieter

2011-01-01

A completely up-to-date resource on computer security Assuming no previous experience in the field of computer security, this must-have book walks you through the many essential aspects of this vast topic, from the newest advances in software and technology to the most recent information on Web applications security. This new edition includes sections on Windows NT, CORBA, and Java and discusses cross-site scripting and JavaScript hacking as well as SQL injection. Serving as a helpful introduction, this self-study guide is a wonderful starting point for examining the variety of competing sec

FENDL/E. Evaluated nuclear data library of neutron nuclear interaction cross-sections and photon production cross-sections and photon-atom interaction cross sections for fusion applications. Version 1.1 of November 1994

International Nuclear Information System (INIS)

Pashchenko, A.B.; Wienke, H.; Ganesan, S.; McLaughlin, P.K.

1996-01-01

This document presents the description of a physical tape containing the basic evaluated nuclear data library of neutron nuclear interaction cross-sections and photon production cross-sections and photon-atom interaction cross-sections for fusion applications. It is part of FENDL, the evaluated nuclear data library for fusion applications. The nuclear data are available cost-free for distribution to interested scientists upon request. The data can also be retrieved by the user via online access through international computer networks. (author). 11 refs, 1 tab

A taxonomic and phylogenetic revision of Penicillium section Aspergilloides

DEFF Research Database (Denmark)

Houbraken, J.; Visagie, C.M.; Meijer, M.

2014-01-01

(CaM) and RNA polymerase II second largest subunit (RPB2) sequences. Section Aspergilloides is subdivided into 12 clades and 51 species. Twenty-five species are described here as new and P. yezoense, a species originally described without a Latin diagnosis, is validated. Species belonging to section...

Utilization of KENO-IV computer code with HANSEN-ROACH library

International Nuclear Information System (INIS)

Lima Barros, M. de; Vellozo, S.O.

1982-01-01

Several analysis with KENO-IV computer code, which is based in the Monte Carlo method, and the cross section library HANSEN-ROACH, were done, aiming to present the more convenient form to execute criticality calculations with this computer code and this cross sections. (E.G.) [pt

26 CFR 1.809-10 - Computation of equity base.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Computation of equity base. 1.809-10 Section 1... (CONTINUED) INCOME TAXES Gain and Loss from Operations § 1.809-10 Computation of equity base. (a) In general. For purposes of section 809, the equity base of a life insurance company includes the amount of any...

Flow in curved ducts of varying cross-section

Science.gov (United States)

Sotiropoulos, F.; Patel, V. C.

1992-07-01

Two numerical methods for solving the incompressible Navier-Stokes equations are compared with each other by applying them to calculate laminar and turbulent flows through curved ducts of regular cross-section. Detailed comparisons, between the computed solutions and experimental data, are carried out in order to validate the two methods and to identify their relative merits and disadvantages. Based on the conclusions of this comparative study a numerical method is developed for simulating viscous flows through curved ducts of varying cross-sections. The proposed method is capable of simulating the near-wall turbulence using fine computational meshes across the sublayer in conjunction with a two-layer k-epsilon model. Numerical solutions are obtained for: (1) a straight transition duct geometry, and (2) a hydroturbine draft-tube configuration at model scale Reynolds number for various inlet swirl intensities. The report also provides a detailed literature survey that summarizes all the experimental and computational work in the area of duct flows.

Collidoscope: An Improved Tool for Computing Collisional Cross-Sections with the Trajectory Method

Science.gov (United States)

Ewing, Simon A.; Donor, Micah T.; Wilson, Jesse W.; Prell, James S.

2017-04-01

Ion mobility-mass spectrometry (IM-MS) can be a powerful tool for determining structural information about ions in the gas phase, from small covalent analytes to large, native-like or denatured proteins and complexes. For large biomolecular ions, which may have a wide variety of possible gas-phase conformations and multiple charge sites, quantitative, physically explicit modeling of collisional cross sections (CCSs) for comparison to IMS data can be challenging and time-consuming. We present a "trajectory method" (TM) based CCS calculator, named "Collidoscope," which utilizes parallel processing and optimized trajectory sampling, and implements both He and N2 as collision gas options. Also included is a charge-placement algorithm for determining probable charge site configurations for protonated protein ions given an input geometry in pdb file format. Results from Collidoscope are compared with those from the current state-of-the-art CCS simulation suite, IMoS. Collidoscope CCSs are within 4% of IMoS values for ions with masses from 18 Da to 800 kDa. Collidoscope CCSs using X-ray crystal geometries are typically within a few percent of IM-MS experimental values for ions with mass up to 3.5 kDa (melittin), and discrepancies for larger ions up to 800 kDa (GroEL) are attributed in large part to changes in ion structure during and after the electrospray process. Due to its physically explicit modeling of scattering, computational efficiency, and accuracy, Collidoscope can be a valuable tool for IM-MS research, especially for large biomolecular ions.

Current algorithms for computed electron beam dose planning

International Nuclear Information System (INIS)

Brahme, A.

1985-01-01

Two- and sometimes three-dimensional computer algorithms for electron beam irradiation are capable of taking all irregularities of the body cross-section and the properties of the various tissues into account. This is achieved by dividing the incoming broad beams into a number of narrow pencil beams, the penetration of which can be described by essentially one-dimensional formalisms. The constituent pencil beams are most often described by Gaussian, experimentally or theoretically derived distributions. The accuracy of different dose planning algorithms is discussed in some detail based on their ability to take the different physical interaction processes of high energy electrons into account. It is shown that those programs that take the deviations from the simple Gaussian model into account give the best agreement with experimental results. With such programs a dosimetric relative accuracy of about 5% is generally achieved except in the most complex inhomogeneity configurations. Finally, the present limitations and possible future developments of electron dose planning are discussed. (orig.)

Computational study of axisymmetric modes in noncircular cross section tokamaks

International Nuclear Information System (INIS)

Johnson, J.L.; Chance, M.S.; Greene, J.M.; Grimm, R.C.; Jardin, S.C.; Kerner, W.; Manickam, J.; Weimer, K.E.

1976-09-01

A major computational program to investigate the MHD equilibrium, stability, and nonlinear evolution properties of realistic tokamak configurations is proceeding. Preliminary application is made to the Princeton PDX device. Both axisymmetric (n = 0) modes and kink (n = 1) modes are found; the growth rates depend sensitively on the configuration. A study of the nonlinear evolution of axisymmetric modes in such a device shows that flux conservation in the vacuum region can limit their growth

Vectorization of nuclear codes on FACOM 230-75 APU computer

International Nuclear Information System (INIS)

Harada, Hiroo; Higuchi, Kenji; Ishiguro, Misako; Tsutsui, Tsuneo; Fujii, Minoru

1983-02-01

To provide for the future usage of supercomputer, we have investigated the vector processing efficiency of nuclear codes which are being used at JAERI. The investigation is performed by using FACOM 230-75 APU computer. The codes are CITATION (3D neutron diffusion), SAP5 (structural analysis), CASCMARL (irradiation damage simulation). FEM-BABEL (3D neutron diffusion by FEM), GMSCOPE (microscope simulation). DWBA (cross section calculation at molecular collisions). A new type of cell density calculation for particle-in-cell method is also investigated. For each code we have obtained a significant speedup which ranges from 1.8 (CASCMARL) to 7.5 (GMSCOPE), respectively. We have described in this report the running time dynamic profile analysis of the codes, numerical algorithms used, program restructuring for the vectorization, numerical experiments of the iterative process, vectorized ratios, speedup ratios on the FACOM 230-75 APU computer, and some vectorization views. (author)

Retrofitting of NPP Computer systems

International Nuclear Information System (INIS)

Pettersen, G.

1994-01-01

Retrofitting of nuclear power plant control rooms is a continuing process for most utilities. This involves introducing and/or extending computer-based solutions for surveillance and control as well as improving the human-computer interface. The paper describes typical requirements when retrofitting NPP process computer systems, and focuses on the activities of Institute for energieteknikk, OECD Halden Reactor project with respect to such retrofitting, using examples from actual delivery projects. In particular, a project carried out for Forsmarksverket in Sweden comprising upgrade of the operator system in the control rooms of units 1 and 2 is described. As many of the problems of retrofitting NPP process computer systems are similar to such work in other kinds of process industries, an example from a non-nuclear application area is also given

Hypercard Another Computer Tool.

Science.gov (United States)

Geske, Joel

1991-01-01

Describes "Hypercard," a computer application package usable in all three modes of instructional computing: tutor, tool, and tutee. Suggests using Hypercard in scholastic journalism programs to teach such topics as news, headlines, design, photography, and advertising. Argues that the ability to access, organize, manipulate, and comprehend…

8 CFR 293.1 - Computation of interest.

Science.gov (United States)

2010-01-01

... simple interest table in § 293.3 shall be utilized in the computation of interest under this part. ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Computation of interest. 293.1 Section 293... INTEREST ON CASH RECEIVED TO SECURE IMMIGRATION BONDS § 293.1 Computation of interest. Interest shall be...

6 CFR 13.27 - Computation of time.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Computation of time. 13.27 Section 13.27 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.27 Computation of time. (a) In computing any period of time under this part or in an order issued...

A PC [personal computer]-based version of KENO V.a

International Nuclear Information System (INIS)

Nigg, D.A.; Atkinson, C.A.; Briggs, J.B.; Taylor, J.T.

1990-01-01

The use of personal computers (PCs) and engineering workstations for complex scientific computations has expanded rapidly in the last few years. This trend is expected to continue in the future with the introduction of increasingly sophisticated microprocessors and microcomputer systems. For a number of reasons, including security, economy, user convenience, and productivity, an integrated system of neutronics and radiation transport software suitable for operation in an IBM PC-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past 3 yr. Nuclear cross-section data and resonance parameters are preprocessed from the Evaluated Nuclear Data Files Version 5 (ENDF/B-V) and supplied in a form suitable for use in a PC-based spectrum calculation and multigroup cross-section generation module. This module produces application-specific data libraries that can then be used in various neutron transport and diffusion theory code modules. This paper discusses several details of the Monte Carlo criticality module, which is based on the well-known highly-sophisticated KENO V.a package developed at Oak Ridge National Laboratory and previously released in mainframe form by the Radiation Shielding Information Center (RSIC). The conversion process and a variety of benchmarking results are described

Cross-sectional anatomy, computed tomography and magnetic resonance imaging of the head of common dolphin (Delphinus delphis) and striped dolphin (Stenella coeruleoalba).

Science.gov (United States)

Alonso-Farré, J M; Gonzalo-Orden, M; Barreiro-Vázquez, J D; Barreiro-Lois, A; André, M; Morell, M; Llarena-Reino, M; Monreal-Pawlowsky, T; Degollada, E

2015-02-01

Computed tomography (CT) and low-field magnetic resonance imaging (MRI) were used to scan seven by-caught dolphin cadavers, belonging to two species: four common dolphins (Delphinus delphis) and three striped dolphins (Stenella coeruleoalba). CT and MRI were obtained with the animals in ventral recumbency. After the imaging procedures, six dolphins were frozen at -20°C and sliced in the same position they were examined. Not only CT and MRI scans, but also cross sections of the heads were obtained in three body planes: transverse (slices of 1 cm thickness) in three dolphins, sagittal (5 cm thickness) in two dolphins and dorsal (5 cm thickness) in two dolphins. Relevant anatomical structures were identified and labelled on each cross section, obtaining a comprehensive bi-dimensional topographical anatomy guide of the main features of the common and the striped dolphin head. Furthermore, the anatomical cross sections were compared with their corresponding CT and MRI images, allowing an imaging identification of most of the anatomical features. CT scans produced an excellent definition of the bony and air-filled structures, while MRI allowed us to successfully identify most of the soft tissue structures in the dolphin's head. This paper provides a detailed anatomical description of the head structures of common and striped dolphins and compares anatomical cross sections with CT and MRI scans, becoming a reference guide for the interpretation of imaging studies. © 2014 Blackwell Verlag GmbH.

Computational physics

CERN Document Server

Newman, Mark

2013-01-01

A complete introduction to the field of computational physics, with examples and exercises in the Python programming language. Computers play a central role in virtually every major physics discovery today, from astrophysics and particle physics to biophysics and condensed matter. This book explains the fundamentals of computational physics and describes in simple terms the techniques that every physicist should know, such as finite difference methods, numerical quadrature, and the fast Fourier transform. The book offers a complete introduction to the topic at the undergraduate level, and is also suitable for the advanced student or researcher who wants to learn the foundational elements of this important field.

A computer code for the prediction of mill gases and hot air distribution between burners sections as input parameters for 3D CFD furnace calculation

International Nuclear Information System (INIS)

Tucakovic, Dragan; Zivanovic, Titoslav; Beloshevic, Srdjan

2006-01-01

Current computer technology development enables application of powerful software packages that can provide a reliable insight into real operating conditions of a steam boiler in the Thermal Power Plant. Namely, an application of CFD code to the 3D analysis of combustion and heat transfer in a furnace provides temperature, velocity and concentration fields in both cross sectional and longitudinal planes of the observed furnace. In order to obtain reliable analytical results, which corresponds to real furnace conditions, it is necessary to accurately predict a distribution of mill gases and hot air between burners' sections, because these parameters are input values for the furnace 3D calculation. Regarding these tasks, the computer code for the prediction of mill gases and hot air distribution has been developed at the Department for steam boilers of the Faculty of Mechanical Engineering in Belgrade. The code is based on simultaneous calculations of material and heat balances for fan mill and air tracts. The aim of this paper is to present a methodology of performed calculations and results obtained for the steam boiler furnace of 350 MWe Thermal Power Plant equipped with eight fan mills. Key words: mill gases, hot air, aerodynamic calculation, air tract, mill tract.

Acute pelvic inflammatory disease: pictorial essay focused on computed tomography and magnetic resonance imaging findings

Energy Technology Data Exchange (ETDEWEB)

Febronio, Eduardo Miguel; Rosas, George de Queiroz; D' Ippolito, Giuseppe, E-mail: giuseppe_dr@uol.com.br [Department of Imaging Diagnosis, Escola Paulista de Medicina - Universidade Federal de Sao Paulo (EPMUnifesp), Sao Paulo, SP (Brazil)

2012-11-15