WorldWideScience

Sample records for se content increased

  1. The determination of Se content in Se egg by NAA in MNSR

    International Nuclear Information System (INIS)

    Wang Ke; Hou Xiaolin

    1994-01-01

    The selenium contents in the yolk, albumin and shell of the egg which was laid by layer hen fed with various Se concentrations are determined by thermal neutron activation analysis with a nuclear reaction 78 Se(n, γ) 77 Se m on the miniature neutron source reactor (MNSR). The results show that the more the selenium added to the feed, the higher the Se content in the egg and that in the egg constituents, the highest Se content is in the egg yolk and the lowest in the egg albumin

  2. Effect of increasing tellurium content on the electronic and optical properties of cadmium selenide telluride alloys CdSe{sub 1-x}Te{sub x}: An ab initio study

    Energy Technology Data Exchange (ETDEWEB)

    Reshak, Ali Hussain, E-mail: maalidph@yahoo.co.uk [Institute of Physical Biology-South Bohemia University, Nove Hrady 37333 (Czech Republic); School of Material Engineering, Malaysia University of Perlis, P.O Box 77, d/a Pejabat Pos Besar, 01007 Kangar, Perlis (Malaysia); Kityk, I.V. [Electrical Engineering Department, Technical University of Czestochowa, Al. Armii Krajowej 17/19, Czestochowa (Poland); Khenata, R. [Laboratoire de Physique Quantique et de Modelisation Mathematique de la Matiere (LPQ3 M), universite de Mascara, Mascara 29000 (Algeria); Department of Physics and Astronomy, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia); Auluck, S. [National Physical Laboratory Dr. K S Krishnan Marg, New Delhi 110012 (India)

    2011-06-16

    Highlights: > Theoretical study of effect of vary Te content on band structure, density of states, linear and nonlinear optical susceptibilities of CdSe{sub 1-x}Te{sub x}. > Increasing Te content leads to a decrease in the energy band gap. > Significant enhancement of the electronic properties as a function of tellurium concentration - Abstract: An all electron full potential linearized augmented plane wave method, within a framework of GGA (EV-GGA) approach, has been used for an ab initio theoretical study of the effect of increasing tellurium content on the band structure, density of states, and the spectral features of the linear and nonlinear optical susceptibilities of the cadmium-selenide-telluride ternary alloys CdSe{sub 1-x}Te{sub x} (x = 0.0, 0.25, 0.5, 0.75 and 1.0). Our calculations show that increasing Te content leads to a decrease in the energy band gap. We find that the band gaps are 0.95 (1.76), 0.89 (1.65), 0.83 (1.56), 0.79 (1.44) and 0.76 (1.31) eV for x = 0.0, 0.25, 0.5, 0.75 and 1.0 in the cubic structure. As these alloys are known to have a wurtzite structure for x less than 0.25, the energy gaps are 0.8 (1.6) eV and 0.7 (1.55) eV for the wurtzite structure (x = 0.0, 0.25) for the GGA (EV-GGA) exchange correlation potentials. This reduction in the energy gaps enhances the functionality of the CdSe{sub 1-x}Te{sub x} alloys, at least for these concentrations, leading to an increase in the effective second-order susceptibility coefficients from 16.75 pm/V (CdSe) to 18.85 pm/V (CdSe{sub 0.75}Te{sub 0.25}), 27.23 pm/V (CdSe{sub 0.5}Te{sub 0.5}), 32.25 pm/V (CdSe{sub 0.25}Te{sub 0.75}), and 37.70 pm/V (CdTe) for the cubic structure and from 12.65 pm/V (CdSe) to 21.11 pm/V (CdSe{sub 0.75}Te{sub 0.25}) in the wurtzite structure. We find a nonlinear relationship between the absorption/emission energies and composition, and a significant enhancement of the electronic properties as a function of tellurium concentration. This variation will help in

  3. Biofortification (Se: Does it increase the content of phenolic compounds in virgin olive oil (VOO?

    Directory of Open Access Journals (Sweden)

    Roberto D'Amato

    Full Text Available Extra-Virgin Olive Oil (EVOO is a fundamental component of the Mediterranean diet and it may contain several anti-oxidant substances, such as phenols. Previous research has shown that this food may be enriched in phenols by spraying a sodium-selenate solution (100 mg L-1 Se onto the crop canopy before flowering. The aim of this research was to evaluate the effect of this Se-fertilization before flowering (cv. Leccino on the phenolic profile of EVOOs, and test to what extent such effects depend on the weather pattern, as observed in two contrasting experimental seasons (2013 and 2014. Results showed that Se-fertilisation enriched EVOOs both in selenium (up to 120 μg kg-1 and in phenols (up to 401 mg kg-1. This latter enrichment was related to an increase in PAL (L-Phenylalanine Ammonia-Lyase activities and it was largely independent on the climatic pattern. Considering the phenolic profile, oleacein, ligustroside, aglycone and oleocanthal were the most affected compounds and were increased by 57, 50 and 32%, respectively. All these compounds, especially oleacein, have been shown to exert a relevant anti-oxidant activity, contributing both to the shelf-life of EVOOs and to positive effects on human health. It is suggested that Se-fertilisation of olive trees before flowering may be an interesting practice, particularly with poor cultivars and cold and rainy weather patterns, which would normally lead to the production of EVOOs with unfavourable phenolic profile.

  4. Biofortification (Se): Does it increase the content of phenolic compounds in virgin olive oil (VOO)?

    Science.gov (United States)

    D’Amato, Roberto; Proietti, Primo; Onofri, Andrea; Regni, Luca; Esposto, Sonia; Servili, Maurizio; Businelli, Daniela; Selvaggini, Roberto

    2017-01-01

    Extra-Virgin Olive Oil (EVOO) is a fundamental component of the Mediterranean diet and it may contain several anti-oxidant substances, such as phenols. Previous research has shown that this food may be enriched in phenols by spraying a sodium-selenate solution (100 mg L-1 Se) onto the crop canopy before flowering. The aim of this research was to evaluate the effect of this Se-fertilization before flowering (cv. Leccino) on the phenolic profile of EVOOs, and test to what extent such effects depend on the weather pattern, as observed in two contrasting experimental seasons (2013 and 2014). Results showed that Se-fertilisation enriched EVOOs both in selenium (up to 120 μg kg-1) and in phenols (up to 401 mg kg-1). This latter enrichment was related to an increase in PAL (L-Phenylalanine Ammonia-Lyase) activities and it was largely independent on the climatic pattern. Considering the phenolic profile, oleacein, ligustroside, aglycone and oleocanthal were the most affected compounds and were increased by 57, 50 and 32%, respectively. All these compounds, especially oleacein, have been shown to exert a relevant anti-oxidant activity, contributing both to the shelf-life of EVOOs and to positive effects on human health. It is suggested that Se-fertilisation of olive trees before flowering may be an interesting practice, particularly with poor cultivars and cold and rainy weather patterns, which would normally lead to the production of EVOOs with unfavourable phenolic profile. PMID:28448631

  5. Increase in the selenium content of extra virgin olive oil: quantitative and qualitative implications

    Directory of Open Access Journals (Sweden)

    D’Amato, R.

    2014-06-01

    Full Text Available The biofortification of food crops for human consumption is a direct strategy increasing dietary intake of selenium (Se. The aim of this study was to evaluate the possibility of increasing the Se content of extra virgin olive oil (EVOO by spraying the olive tree canopy with sodium selenate and the effect of the increase in Se on the chemical properties and sensory characteristics of the EVOO. Se treatments were up to 50 times more effective in enhancing Se content in the EVOO compared with the untreated controls. Se concentration in all the EVOO samples can be considered adequate and useful for providing the human diet with the correct dose of Se. Se-enriched EVOO showed a significant increase in pigment and phenol content. Also, Se treatment does not produce negative effects on fruit characteristics or the sensory quality of EVOO.La biofortificación de cultivos alimenticios para el consumo humano es una estrategia directa para aumentar la ingesta de selenio (Se en la dieta. El objetivo de este estudio fue evaluar la posibilidad de aumentar el contenido de Se en aceites de oliva virgen extra (AOVE pulverizando la copa de los olivos con selenato de sodio y el efecto del aumento en el contenido de Se en las propiedades químicas y características sensoriales del AOVE. Los tratamientos con Se fueron muy eficaces consiguiendo aumentar el contenido de Se en el AOVE hasta 50 veces más en comparación con los controles no tratados. La concentración de Se en todas las muestras EVOO puede considerarse adecuada y útil para proporcionar a la dieta humana con la dosis correcta de Se. EVOO-Se enriquecido mostró un aumento significativo en pigmentos y contenido de fenoles. Además, el tratamiento de Se no implica efectos negativos sobre caracteristicas frutales ni sobre la calidad sensorial de AOVE.

  6. The influence of precursor Cu content and two-stage processing conditions on the microstructure of Cu{sub 2}ZnSnSe{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Márquez-Prieto, J., E-mail: jose.prieto@northumbria.ac.uk [Northumbria Photovoltaic Application Centre, Faculty of Engineering and Environment, Northumbria University, Ellison Building, Newcastle upon Tyne NE1 8ST (United Kingdom); Ren, Y. [Ångström Solar Center, Solid State Electronics, Uppsala University, Uppsala 751 21 (Sweden); Miles, R.W.; Pearsall, N.; Forbes, I. [Northumbria Photovoltaic Application Centre, Faculty of Engineering and Environment, Northumbria University, Ellison Building, Newcastle upon Tyne NE1 8ST (United Kingdom)

    2015-05-01

    This paper reports the influence of processing temperature on the microstructure of Cu{sub 2}ZnSnSe{sub 4} (CZTSe) absorber layers for temperatures between 380 and 550 °C produced using a 2-stage process. X-ray diffraction analysis showed the formation of Cu{sub 2}ZnSnSe{sub 4} over this temperatures range. The Williamson-Hall method was used for microstructural analysis of the CZTSe absorbers, and this showed a progressive decrease of the micro-strain of the CZTSe with increasing selenisation temperature. The influence of precursor Cu content on the microstructure of the CZTSe was also studied. An increase of Cu content in the precursor is correlated to an increase in grain size and a decrease in micro-strain. Raman measurements show an asymmetrical broadening towards lower energies of the main 197 cm{sup −1} mode for Cu-poor compositions. This study provides an insight into the dependency of the crystallinity of CZTSe on composition and synthesis temperature. - Highlights: • We fabricate Cu{sub 2}ZnSnSe{sub 4} thin films by sputtering and post-reactive annealing. • The micro-strain of Cu{sub 2}ZnSnSe{sub 4} increases when Cu content decreases. • The micro-strain of Cu{sub 2}ZnSnSe{sub 4} decreases with increasing processing temperature. • The defect concentration of Cu{sub 2}ZnSnSe{sub 4} increases when Cu content decreases.

  7. Structural and electrical properties of co-evaporated Cu(In,Ga)Se{sub 2} thin films with varied Cu contents

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min Young; Kim, Girim; Kim, Jongwan; Park, Jae Hwan; Lim, Donggun, E-mail: dglim@ut.ac.kr

    2013-11-01

    Cu(In,Ga)Se{sub 2} (CIGS) thin films were fabricated with varying Cu contents. Cu/(Ga + In) ratios were varied between 0.4 and 1.02. Solar cells were then fabricated by co-evaporation using the CIGS layers as absorbers. The influences of Cu content on the cells' structural, optical and electrical properties were studied. The CIGS thin films were characterized by X-ray diffractometer, scanning electron microscopy, energy-dispersive spectroscopy, four-point probe measurement and Hall measurement. Grain size in the films increased with increasing Cu content. At a Cu/(Ga + In) ratio of 0.86, the (220/204) peak was stronger than the (112) peak and carrier concentration was 1.49 × 10{sup 16} cm{sup −3}. Optimizing the Cu content resulted in a CIGS solar cell with an efficiency of 16.5%. - Highlights: • Improvement of technique to form Cu(In,Ga)Se{sub 2} (CIGS) film by co-evaporation method • Cu/(In + Ga) ratio to improve the efficiency for CIGS thin film solar cell • Cu content effects have been analyzed. • Optimum condition of CIGS layer as an absorber of thin film solar cells.

  8. Assessment of the anticancer compounds Se-methylselenocysteine and glucosinolates in Se-biofortified broccoli (Brassica oleracea L. var. italica) sprouts and florets.

    Science.gov (United States)

    Ávila, Fabricio William; Faquin, Valdemar; Yang, Yong; Ramos, Silvio Junio; Guilherme, Luiz Roberto G; Thannhauser, Theodore W; Li, Li

    2013-07-03

    Broccoli (Brassica oleracea L. var. italica) is a rich source of chemopreventive compounds. Here, we evaluated and compared the effect of selenium (Se) treatment on the accumulation of anticancer compounds Se-methylselenocysteine (SeMSCys) and glucosinolates in broccoli sprouts and florets. Total Se and SeMSCys content in sprouts increased concomitantly with increasing Se doses. Selenate was superior to selenite in inducing total Se accumulation, but selenite is equally effective as selenate in promoting SeMSCys synthesis in sprouts. Increasing sulfur doses reduced total Se and SeMSCys content in sprouts treated with selenate, but not in those with selenite. Examination of five broccoli cultivars reveals that sprouts generally have better fractional ability than florets to convert inorganic Se into SeMSCys. Distinctive glucosinolate profiles between sprouts and florets were observed, and sprouts contained approximately 6-fold more glucoraphanin than florets. In contrast to florets, glucosinolate content was not affected by Se treatment in sprouts. Thus, Se-enriched broccoli sprouts are excellent for simultaneous accumulation of chemopreventive compounds SeMSCys and glucoraphanin.

  9. Luminescence investigation of Cu(In,Ga)Se{sub 2}solar cells with different Ga-contents grown in a three-stage-process on glass substrate

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, Kristin; Mueller, Mathias; Hempel, Thomas; Bertram, Frank; Christen, Juergen [Institute of Experimental Physics, Otto-von-Guericke-University Magdeburg (Germany); Abou-Ras, Daniel; Rissom, Thorsten; Unold, Thomas; Schock, Hans-Werner [Helmholtz-Zentrum Berlin for Materials and Energy (Germany)

    2011-07-01

    A fundamental advantage of Cu(In,Ga)Se{sub 2} (CIGS) alloys as absorber materials in thin-film solar cells is their direct band gap energies which can be varied between 1.04 eV (CuInSe{sub 2}) and 1.68 eV (CuGaSe{sub 2}). Photoluminescence (PL) spectra of complete CIGS solar cells with a systematic variation of the Ga-content in the absorber layer will be presented. The CIGS cells investigated were grown on a Mo back contact sputtered on soda lime glass and have a Ga-concentration ranging over the entire range from CuInSe{sub 2} to CuGaSe{sub 2}. Samples with Ga-contents between 100 % and 33 % show two broad luminescence bands. In contrast, CuInSe{sub 2} exhibits only one broad luminescence band. Each band is composed of two or three different transitions. Varying excitation density over four orders of magnitude results for samples with Ga-content of 0 % and 33 % in a blueshift of the main peak with increasing excitation density. For higher Ga-concentrations, first a blue- and then a redshift of the dominating peak with increasing excitation density is visible. The temperature dependence of the PL spectra is investigated going from 4 K to 300 K.

  10. Increase of radiocarbon concentration in tree rings from Kujawy (SE Poland) around AD 774-775

    Science.gov (United States)

    Rakowski, Andrzej Z.; Krąpiec, Marek; Huels, Mathias; Pawlyta, Jacek; Dreves, Alexander; Meadows, John

    2015-10-01

    Evidence of a rapid increase in atmospheric radiocarbon (14C) content in AD 774-775 was presented by Miyake et al. (2012), who observed an increase of about 12‰ in the 14C content in annual tree rings from Japanese cedar. Usoskin et al. (2013) report a similar 14C spike in German oak, and attribute it to exceptional solar activity. If this phenomenon is global in character, such rapid changes in 14C concentration may affect the accuracy of calibrated dates, as the existing calibration curve is composed mainly of decadal samples. Single-year samples of dendro-chronologically dated tree rings of deciduous oak (Quercus robur) from Kujawy, a village near Krakow (SE Poland), spanning the years AD 765-796, were collected and their 14C content was measured using the AMS system in the Leibniz Laboratory. The results clearly show a rapid increase of 9.2 ± 2.1‰ in the 14C concentration in tree rings between AD 774 and AD 775, with maximum Δ14C = 4.1 ± 2.3‰ noted in AD 776.

  11. One-step synthesis of PbSe-ZnSe composite thin film

    Directory of Open Access Journals (Sweden)

    Abe Seishi

    2011-01-01

    Full Text Available Abstract This study investigates the preparation of PbSe-ZnSe composite thin films by simultaneous hot-wall deposition (HWD from multiple resources. The XRD result reveals that the solubility limit of Pb in ZnSe is quite narrow, less than 1 mol%, with obvious phase-separation in the composite thin films. A nanoscale elemental mapping of the film containing 5 mol% PbSe indicates that isolated PbSe nanocrystals are dispersed in the ZnSe matrix. The optical absorption edge of the composite thin films shifts toward the low-photon-energy region as the PbSe content increases. The use of a phase-separating PbSe-ZnSe system and HWD techniques enables simple production of the composite package.

  12. Effects of the copper content on the structural and electrical properties of Cu2ZnSnSe4 bulks

    Science.gov (United States)

    Tsega, Moges; Dejene, F. B.; Koao, L. F.

    2016-01-01

    We have investigated the concept of defect in CuxZnSnSe4 (x=1.6-2.0) and Cuy(Zn0.9Sn1.1)Se4 (y= 1.6-2.0) bulks prepared by liquid-phase sintering at 600 °C for 2 h with soluble sintering aids of Sb2S3 and Te. All samples were found to exhibit p-type semiconductor for CuxZnSnSe4, while n-type of behavior obtained at y= 1.8-2.0 for Cuy(Zn0.9Sn1.1)Se4 pellets. The Cu vacancy acts as an acceptor point defect to form the p-type semiconductor, and Sn4+ acts as a donor to form the n-type behavior for the Sn-rich CZTSe. SEM images of pellets show dense surface morphology, and increase in grain size upon Cu inclusion. The largely increased Hall mobility and the slightly changed carrier concentration for Cuy(Zn0.9Sn1.1)Se4 with increasing the Cu content is related to the types of its defects. At y=2.0 with carrier concentration of 4.88×1017 cm-3 showed the highest mobility of around 58 cm2/V s. Based upon the proposed point defects, the CZTSe property can be consistently explained.

  13. Increase of radiocarbon concentration in tree rings from Kujawy (SE Poland) around AD 774–775

    International Nuclear Information System (INIS)

    Rakowski, Andrzej Z.; Krąpiec, Marek; Huels, Mathias; Pawlyta, Jacek; Dreves, Alexander; Meadows, John

    2015-01-01

    Evidence of a rapid increase in atmospheric radiocarbon ( 14 C) content in AD 774–775 was presented by Miyake et al. (2012), who observed an increase of about 12‰ in the 14 C content in annual tree rings from Japanese cedar. Usoskin et al. (2013) report a similar 14 C spike in German oak, and attribute it to exceptional solar activity. If this phenomenon is global in character, such rapid changes in 14 C concentration may affect the accuracy of calibrated dates, as the existing calibration curve is composed mainly of decadal samples. Single-year samples of dendro-chronologically dated tree rings of deciduous oak (Quercus robur) from Kujawy, a village near Krakow (SE Poland), spanning the years AD 765–796, were collected and their 14 C content was measured using the AMS system in the Leibniz Laboratory. The results clearly show a rapid increase of 9.2 ± 2.1‰ in the 14 C concentration in tree rings between AD 774 and AD 775, with maximum Δ 14 C = 4.1 ± 2.3‰ noted in AD 776.

  14. Increase of radiocarbon concentration in tree rings from Kujawy (SE Poland) around AD 774–775

    Energy Technology Data Exchange (ETDEWEB)

    Rakowski, Andrzej Z., E-mail: arakowski@polsl.pl [Leibniz-Laboratory for Radiometric Dating and Isotope Research, University Kiel, Max-Eyth-Str. 11-13, 24118 Kiel (Germany); Institute of Physics – Center for Science and Education, Silesian University of Technology, Konarskiego Str. 22B, 44-100 Gliwice (Poland); Krąpiec, Marek [AGH University of Science and Technology, Mickiewicza Av. 30, 30-059 Krakow (Poland); Huels, Mathias [Leibniz-Laboratory for Radiometric Dating and Isotope Research, University Kiel, Max-Eyth-Str. 11-13, 24118 Kiel (Germany); Pawlyta, Jacek [Institute of Physics – Center for Science and Education, Silesian University of Technology, Konarskiego Str. 22B, 44-100 Gliwice (Poland); Dreves, Alexander [Leibniz-Laboratory for Radiometric Dating and Isotope Research, University Kiel, Max-Eyth-Str. 11-13, 24118 Kiel (Germany); Meadows, John [Leibniz-Laboratory for Radiometric Dating and Isotope Research, University Kiel, Max-Eyth-Str. 11-13, 24118 Kiel (Germany); Centre for Baltic and Scandinavian Archaeology, Schleswig-Holstein State Museums Foundation, Schloss Gottorf, Schloßinsel, 24837 Schleswig (Germany)

    2015-10-15

    Evidence of a rapid increase in atmospheric radiocarbon ({sup 14}C) content in AD 774–775 was presented by Miyake et al. (2012), who observed an increase of about 12‰ in the {sup 14}C content in annual tree rings from Japanese cedar. Usoskin et al. (2013) report a similar {sup 14}C spike in German oak, and attribute it to exceptional solar activity. If this phenomenon is global in character, such rapid changes in {sup 14}C concentration may affect the accuracy of calibrated dates, as the existing calibration curve is composed mainly of decadal samples. Single-year samples of dendro-chronologically dated tree rings of deciduous oak (Quercus robur) from Kujawy, a village near Krakow (SE Poland), spanning the years AD 765–796, were collected and their {sup 14}C content was measured using the AMS system in the Leibniz Laboratory. The results clearly show a rapid increase of 9.2 ± 2.1‰ in the {sup 14}C concentration in tree rings between AD 774 and AD 775, with maximum Δ{sup 14}C = 4.1 ± 2.3‰ noted in AD 776.

  15. Structure and optical properties of GaSe-CdSe composites driven by Cd intercalation in GaSe lamellar crystals

    International Nuclear Information System (INIS)

    Caraman, Iuliana; Kantser, Valeriu; Evtodiev, Igor; Untila, Dumitru; Dmitroglo, Liliana; Leontie, Liviu; Arzumanyan, Grigory

    2015-01-01

    A new composite material composed of GaSe and CdSe has been obtained by treatment of GaSe single-crystal lamellas in Cd vapors at temperatures of 773-853 K and intercalation of Cd interlayers. The structure and optical properties of the GaSe-CdSe composite material have been studied. The content of CdSe crystallites was found to grow with increasing treatment temperature or with increasing duration of treatment at a constant temperature. Analysis of XRD, PL, XPS, AFM, and Raman patterns has shown that the heterogeneous composite composed of micro and nanocrystallites of CdSe in GaSe can be obtained by Cd intercalation in a temperature range of 753-853 K. On the basis of Raman spectrum, the vibrational modes of the composite have been identified. The PL of these materials contains emission bands of free and bound excitons, donor-acceptor bands, and bands of recombination via impurity levels. The PL emission spectra measured at a temperature of 78 and 300 K for the composites result from the overlapping of the emission bands of the components of GaSe doped with Cd and the CdSe crystallites. (authors)

  16. Electrodeposition and Thermoelectric Properties of Cu-Se Binary Compound Films

    Science.gov (United States)

    Yang, Mengqian; Shen, Zhengwu; Liu, Xiaoqing; Wang, Wei

    2016-03-01

    Cu-Se binary compound films have been prepared by electrodeposition from solutions containing CuSO4, H2SeO3, and H2SO4 and their composition, structure, and thermoelectric performance analyzed. Moving the depositing potential negatively increased the Cu content in the film, remarkably so for relatively low Cu2+ concentration in the solution. X-ray diffraction analysis showed that the phase composition of the films varied with their Cu content. Cu-Se binary compound films electrodeposited from solutions with different concentration ratios of CuSO4 to H2SeO3 showed two different phases: α-Cu2- x Se (monoclinic) with Se content in the range of 33.3 at.% to 33.8 at.%, and β-Cu2Se (cubic) with Se content in the range of 35.3 at.% to 36.0 at.%. The highest power factor for electrodeposited Cu2- x Se film was 0.13 mW/(K2 m) with Seebeck coefficient of 56.0 μV/K.

  17. Increased cerebral water content in hemodialysis patients.

    Directory of Open Access Journals (Sweden)

    Kathrin Reetz

    Full Text Available Little information is available on the impact of hemodialysis on cerebral water homeostasis and its distribution in chronic kidney disease. We used a neuropsychological test battery, structural magnetic resonance imaging (MRI and a novel technique for quantitative measurement of localized water content using 3T MRI to investigate ten hemodialysis patients (HD on a dialysis-free day and after hemodialysis (2.4±2.2 hours, and a matched healthy control group with the same time interval. Neuropsychological testing revealed mainly attentional and executive cognitive dysfunction in HD. Voxel-based-morphometry showed only marginal alterations in the right inferior medial temporal lobe white matter in HD compared to controls. Marked increases in global brain water content were found in the white matter, specifically in parietal areas, in HD patients compared to controls. Although the global water content in the gray matter did not differ between the two groups, regional increases of brain water content in particular in parieto-temporal gray matter areas were observed in HD patients. No relevant brain hydration changes were revealed before and after hemodialysis. Whereas longer duration of dialysis vintage was associated with increased water content in parieto-temporal-occipital regions, lower intradialytic weight changes were negatively correlated with brain water content in these areas in HD patients. Worse cognitive performance on an attention task correlated with increased hydration in frontal white matter. In conclusion, long-term HD is associated with altered brain tissue water homeostasis mainly in parietal white matter regions, whereas the attentional domain in the cognitive dysfunction profile in HD could be linked to increased frontal white matter water content.

  18. Increased cerebral water content in hemodialysis patients.

    Science.gov (United States)

    Reetz, Kathrin; Abbas, Zaheer; Costa, Ana Sofia; Gras, Vincent; Tiffin-Richards, Frances; Mirzazade, Shahram; Holschbach, Bernhard; Frank, Rolf Dario; Vassiliadou, Athina; Krüger, Thilo; Eitner, Frank; Gross, Theresa; Schulz, Jörg Bernhard; Floege, Jürgen; Shah, Nadim Jon

    2015-01-01

    Little information is available on the impact of hemodialysis on cerebral water homeostasis and its distribution in chronic kidney disease. We used a neuropsychological test battery, structural magnetic resonance imaging (MRI) and a novel technique for quantitative measurement of localized water content using 3T MRI to investigate ten hemodialysis patients (HD) on a dialysis-free day and after hemodialysis (2.4±2.2 hours), and a matched healthy control group with the same time interval. Neuropsychological testing revealed mainly attentional and executive cognitive dysfunction in HD. Voxel-based-morphometry showed only marginal alterations in the right inferior medial temporal lobe white matter in HD compared to controls. Marked increases in global brain water content were found in the white matter, specifically in parietal areas, in HD patients compared to controls. Although the global water content in the gray matter did not differ between the two groups, regional increases of brain water content in particular in parieto-temporal gray matter areas were observed in HD patients. No relevant brain hydration changes were revealed before and after hemodialysis. Whereas longer duration of dialysis vintage was associated with increased water content in parieto-temporal-occipital regions, lower intradialytic weight changes were negatively correlated with brain water content in these areas in HD patients. Worse cognitive performance on an attention task correlated with increased hydration in frontal white matter. In conclusion, long-term HD is associated with altered brain tissue water homeostasis mainly in parietal white matter regions, whereas the attentional domain in the cognitive dysfunction profile in HD could be linked to increased frontal white matter water content.

  19. Use of INAA to study the interaction between Se and Te in cells of Saccharomyces cerevisiae

    International Nuclear Information System (INIS)

    Czauderna, M.; Turska, M.; Sierokowska, S.; Smolinski, S.

    1996-01-01

    The differences in the effects of inorganic Se (IV and VI) compounds and seleno-cystine [(CySe) 2 ] on the Te (as Na 2 TeO 3 ) uptake by the yeast, Saccharomyces cerevisiae, has been studied. Se, Te, Ag, Zn, Fe and Co contents of the cells were measured by instrumental neutron activation analysis. For the determination of the Ag content, the monostandard method was applied as the analytical method. The contents of other elements were determined by comparison with standards having similar amounts of the determined element as the sample. Results obtained show that an antagonist interaction occurs between SeO 2 and Te. There was a significant increase in the concentration of Se and Te when the yeast was incubated in the medium containing (CySe) 2 and Te. (CySe) 2 markedly increased the Ag content of cells, especially within the first 8 h of incubation. The low level of SeO 2 in the medium are the exterior factor which produce an observable increase of the Ag concentration in the cells. The higher level of SeO 2 in the medium causes a long-term marked increase in the Ag content of the cells. The uptake yield of Ag also increased in the presence of (NH 4 ) 2 SeO 4 in the medium. The Te supply produced a significant enhancement in the Ag content of the cells during the initial 8 h of incubation. The presence of Se and/or Te in the medium causes change in the intracellular Zn, Fe and Co levels. (author)

  20. Pressure-induced increase of exciton-LO-phonon coupling in a ZnCdSe/ZnSe quantum well

    Science.gov (United States)

    Guo, Z. Z.; Liang, X. X.; Ban, S. L.

    2003-07-01

    The possibility of pressure-induced increase of exciton-LO-phonon coupling in ZnCdSe/ZnSe quantum wells is studied. The ground state binding energies of the heavy hole excitons are calculated using a variational method with consideration of the electron-phonon interaction and the pressure dependence of the parameters. The results show that for quantum wells with intermediate well width, the exciton binding energy and the LO-phonon energy may coincide in the course of pressure increasing, resulting in the increase of exciton-LO-phonon coupling. It is also found that among the pressure-dependent parameters, the influence of the lattice constant is the most important one. The changes of both the effective masses and the dielectric constants have obvious effects on the exciton binding energy, but their influences are counterbalanced.

  1. CdSe/ZnSe quantum dot structures grown by molecular beam epitaxy with a CdTe submonolayer stressor

    International Nuclear Information System (INIS)

    Sedova, I. V.; Lyublinskaya, O. G.; Sorokin, S. V.; Sitnikova, A. A.; Toropov, A. A.; Donatini, F.; Dang, Si Le; Ivanov, S. V.

    2007-01-01

    A procedure for formation of CdSe quantum dots (QDs) in a ZnSe matrix is suggested. The procedure is based on the introduction of a CdTe submonolayer stressor deposited on the matrix surface just before deposition of the material of the QDs. (For CdTe/ZnSe structure, the relative lattice mismatch is Δa/a ∼ 14%.) The stressor forms small strained islands at the ZnSe surface, thus producing local fields of high elastic stresses controlling the process of the self-assembling of the QDs. According to the data of transmission electron microscopy, this procedure allows a considerable increase in the surface density of QDs, with a certain decrease in their lateral dimensions (down to 4.5 ± 1.5 nm). In the photoluminescence spectra, a noticeable (∼150 meV) shift of the peak to longer wavelengths from the position of the reference CdSe/ZnSe QD structure is observed. The shift is due to some transformation of the morphology of the QDs and an increase in the Cd content in the QDs. Comprehensive studies of the nanostructures by recording and analyzing the excitation spectra of photoluminescence, the time-resolved photoluminescence spectra, and the cathodoluminescence spectra show that the emission spectra involve two types of optical transitions, namely, the type-I transitions in the CdSeTe/ZnSe QDs and the type-II transitions caused mainly by the low cadmium content (Zn,Cd)(Se,Te)/ZnSe layer formed between the QDs

  2. Effects of the copper content on the structural and electrical properties of Cu{sub 2}ZnSnSe{sub 4} bulks

    Energy Technology Data Exchange (ETDEWEB)

    Tsega, Moges, E-mail: mogestsega@yahoo.com [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Department of Physics, Bahir Dar University (Ethiopia); Dejene, F.B.; Koao, L.F. [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa)

    2016-01-01

    We have investigated the concept of defect in Cu{sub x}ZnSnSe{sub 4} (x=1.6–2.0) and Cu{sub y}(Zn{sub 0.9}Sn{sub 1.1})Se{sub 4} (y= 1.6–2.0) bulks prepared by liquid-phase sintering at 600 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. All samples were found to exhibit p-type semiconductor for Cu{sub x}ZnSnSe{sub 4}, while n-type of behavior obtained at y= 1.8–2.0 for Cu{sub y}(Zn{sub 0.9}Sn{sub 1.1})Se{sub 4} pellets. The Cu vacancy acts as an acceptor point defect to form the p-type semiconductor, and Sn{sup 4+} acts as a donor to form the n-type behavior for the Sn-rich CZTSe. SEM images of pellets show dense surface morphology, and increase in grain size upon Cu inclusion. The largely increased Hall mobility and the slightly changed carrier concentration for Cu{sub y}(Zn{sub 0.9}Sn{sub 1.1})Se{sub 4} with increasing the Cu content is related to the types of its defects. At y=2.0 with carrier concentration of 4.88×10{sup 17} cm{sup −3} showed the highest mobility of around 58 cm{sup 2}/V s. Based upon the proposed point defects, the CZTSe property can be consistently explained.

  3. Structure and properties of ZnSxSe1-x thin films deposited by thermal evaporation of ZnS and ZnSe powder mixtures

    Science.gov (United States)

    Valeev, R. G.; Romanov, E. A.; Vorobiev, V. L.; Mukhgalin, V. V.; Kriventsov, V. V.; Chukavin, A. I.; Robouch, B. V.

    2015-02-01

    Interest to ZnSxSe1-x alloys is due to their band-gap tunability varying S and Se content. Films of ZnSxSe1-x were grown evaporating ZnS and ZnSe powder mixtures onto SiO2, NaCl, Si and ITO substrates using an original low-cost method. X-ray diffraction patterns and Raman spectroscopy, show that the lattice structure of these films is cubic ZnSe-like, as S atoms replace Se and film compositions have their initial S/Se ratio. Optical absorption spectra show that band gap values increase from 2.25 to 3 eV as x increases, in agreement with the literature. Because S atomic radii are smaller than Se, EXAFS spectra confirm that bond distances and Se coordination numbers decrease as the Se content decreases. The strong deviation from linearity of ZnSe coordination numbers in the ZnSxSe1-x indicate that within this ordered crystal structure strong site occupation preferences occur in the distribution of Se and S ions. The behavior is quantitatively confirmed by the strong deviation from the random Bernoulli distribution of the three sight occupation preference coefficients of the strained tetrahedron model. Actually, the ternary ZnSxSe1-x system is a bi-binary (ZnS+ZnSe) alloy with evanescent formation of ternary configurations throughout the x-range.

  4. Raman scattering and structural analysis of electrodeposited CuInSe2 and S-rich quaternary CuIn(S,Se)2 semiconductors for solar cells

    International Nuclear Information System (INIS)

    Izquierdo-Roca, Victor; Fontane, Xavier; Morante, Joan Ramon; Saucedo, Edgardo; Ruiz, Carmen M.; Grand, Pierre-Philippe; Jaime-Ferrer, Jesus Salvador; Bermudez, Veronica; Calvo-Barrio, Lorenzo; Alvarez-Garcia, Jacobo; Perez-Rodriguez, Alejandro

    2009-01-01

    This work reports the Raman scattering characterisation of CuInSe 2 precursors grown by single step electrodeposition and the corresponding layers recrystallised under sulphurising conditions for solar cell devices. The analysis of the spectra measured on the as-grown precursors has allowed identifying the main secondary phases in these layers with elemental Se, Cu-Se phases and chalcopyrite Cu-poor ordered vacancy domains. To deepen in the identification of the Cu-Se phases, these measurements have been correlated with the analysis of binary Cu-Se layers. The experimental data indicate that formation of both Se and Cu-Se phases is likely controlled by the Se content in the layers. For values of stoichiometry below 1.15, excess Cu in the layers is accommodated in a phase with very low Raman efficiency (as Cu 2 Se). Increasing the content of Se leads to an increase in the spectral contribution from both Se and Cu 2-x Se, being the formation of these phases likely favoured under high excess Se conditions. The characterisation of the corresponding recrystallised layers has allowed analysing the impact of the presence of the secondary phases in the as-grown absorbers on the performance of the final solar cells. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  5. The Effect of Indium Content on the Atomic Environment and Cluster Stability of GeSe4Inx=10,15 Glasses

    Directory of Open Access Journals (Sweden)

    Georgios S. E. Antipas

    2015-01-01

    Full Text Available The atomic environments of two chalcogenide glasses, with compositions GeSe4In10 and GeSe4In15, were studied via Reverse Monte Carlo and Density Functional Theory. Indium content demoted Ge–Se bonding in favor of Se-In while the contribution of Se–Se in the first coordination shell order was faint. Upon transition to the richer In glass, there was formation of rich Ge-centered clusters at radial distances further than 4 Å from the RMC box center, which was taken to signify a reduction of Ge–Se interactions. Cluster coordination by Se promoted stability while, very conclusively, In coordination lowered cluster stability by intervening in the Ge–Se and Se–Se networks.

  6. Composition tuning of rectifying polarity of colloidal CdS{sub 1−x}Se{sub x} nanocrystal-based devices

    Energy Technology Data Exchange (ETDEWEB)

    An, Yuehua; Wu, Zhenping; Chu, Xulong; Guo, Daoyou; Guo, Xuncai [Beijing University of Posts and Telecommunications, Laboratory of Optoelectronics Materials and Devices, School of Science (China); Li, Linghong [The State University of New York at Potsdam, Physics Department (United States); Li, Peigang, E-mail: pgli@zstu.edu.cn [Zhejiang Sci-Tech University, Department of Physics, Center for Optoelectronics Materials and Devices (China); Tang, Hao [The University of Tennessee at Knoxville, Department of Chemistry (United States); Tang, Weihua, E-mail: whtang@bupt.edu.cn [Beijing University of Posts and Telecommunications, Laboratory of Optoelectronics Materials and Devices, School of Science (China)

    2015-03-15

    CdS{sub 1–x}Se{sub x} colloidal nanocrystals (NCs) were synthesized by colloidal chemistry route. Both lattice parameters and band structure were modulated by tuning the content of Se. As the Se content increases, the peak of UV–Visible absorbance spectrum of CdS{sub 1−x}Se{sub x} shifts toward longer wavelength direction, indicating the reduction of band gap. Devices with Au/CdS{sub 1−x}Se{sub x} NCs/Au structures have been fabricated by assembling the obtained CdS{sub 1−x}Se{sub x} NCs into Au microelectrodes via dielectrophoresis method. It is found that the rectifying polarities of the devices are strongly dependent on the content of Se. With the increasing Se content, the rectification polarity changes from backward to forward. This polarity tuning could be caused by the change of the relative height of the Fermi levels between CdS{sub 1−x}Se{sub x} and Au. The Se-content-dependent rectifying behavior may offer us an opportunity to design novel logical structure in NC-based nanoelectronics.

  7. Raman scattering and structural analysis of electrodeposited CuInSe{sub 2} and S-rich quaternary CuIn(S,Se){sub 2} semiconductors for solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Izquierdo-Roca, Victor; Fontane, Xavier; Morante, Joan Ramon [Departament d' Electronica, Universitat de Barcelona (Spain); Saucedo, Edgardo; Ruiz, Carmen M.; Grand, Pierre-Philippe; Jaime-Ferrer, Jesus Salvador; Bermudez, Veronica [Institut de Recherche et Developement sur l' Energie Photovoltaique (IRDEP), Chatou (France); Calvo-Barrio, Lorenzo [Departament d' Electronica, Universitat de Barcelona (Spain); Lab. Analisis de Superficies, SCT, Universitat de Barcelona (Spain); Alvarez-Garcia, Jacobo [Centre de Recerca i Investigacio de Catalunya (CRIC), Barcelona (Spain); Perez-Rodriguez, Alejandro

    2009-05-15

    This work reports the Raman scattering characterisation of CuInSe{sub 2} precursors grown by single step electrodeposition and the corresponding layers recrystallised under sulphurising conditions for solar cell devices. The analysis of the spectra measured on the as-grown precursors has allowed identifying the main secondary phases in these layers with elemental Se, Cu-Se phases and chalcopyrite Cu-poor ordered vacancy domains. To deepen in the identification of the Cu-Se phases, these measurements have been correlated with the analysis of binary Cu-Se layers. The experimental data indicate that formation of both Se and Cu-Se phases is likely controlled by the Se content in the layers. For values of stoichiometry below 1.15, excess Cu in the layers is accommodated in a phase with very low Raman efficiency (as Cu{sub 2}Se). Increasing the content of Se leads to an increase in the spectral contribution from both Se and Cu{sub 2-x}Se, being the formation of these phases likely favoured under high excess Se conditions. The characterisation of the corresponding recrystallised layers has allowed analysing the impact of the presence of the secondary phases in the as-grown absorbers on the performance of the final solar cells. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Thermoelectric properties of Bi2Te3-Bi2Se3 solid solutions prepared by attrition milling and hot pressing

    International Nuclear Information System (INIS)

    Lee, Go-Eun; Kim, Il-Ho; Choi, Soon-Mok; Lim, Young-Soo; Seo, Won-Seon; Park, Jae-Soung; Yang, Seung-Ho

    2014-01-01

    Bi 2 Te 3-y Se y (y = 0.15 - 0.6) solid solutions were prepared by attrition milling and hot pressing. The lattice constants decreased with increasing Se content, indicating that the Se atoms were successfully substituted into the Te sites. All specimens exhibited n-type conduction, and their electrical resistivities increased slightly with increasing temperature. With increasing Se content, the Seebeck coefficients increased while the thermal conductivity decreased due to the increase in phonon scattering. The maximum figure of merit obtained was 0.63 at 440 K for the undoped Bi 2 Te 2.4 Se 0.6 solid solution.

  9. Optical studies of CdSe/PVA nanocomposite films

    Science.gov (United States)

    Kushwaha, Kamal Kumar; Ramrakhaini, Meera

    2018-05-01

    The nanocomposite films of CdSe nanocrystals in polyvinyl alcohol (PVA) matrix were synthesized by environmental friendly chemical method. These composites were characterized by X-ray diffraction which indicates the hexagonal crystalline structure of CdSe with crystal size up to a few nm. The crystal size is found to decrease by increasing PVA Concentration. The photoluminescence (PL) characteristics of these composite films with varying concentration of PVA as well as Cd2+ content have been investigated. The PL peak of CdSe was observed at 510 nm and higher intensity is observed by increasing PVA concentration without any change in position of PL peak. Due to proper passivation of surface states non-radiative transition are reduced which enhance the PL intensity. By increasing concentration of Cd2+ content in the CdSe/PVA nanocomposite films, smaller CdSe nanocrystals were obtained giving higher intensity and blue shift in the PL peak due to enhanced oscillator strength and quantum confinement effect. The PL peak in green and blue region makes these composite films promising materials for optical display devices. The Refractive index of these composites was also measured at sodium line with the help of Abee's refractometer and was found in the range of 2.20-2.45. It is seen that refractive index varies with polymer concentration. This may be useful for their potential application in anti-reflection coating, display devices and optical sensors.

  10. Se enhanced phytoremediation of diesel in soil by Trifolium repens.

    Science.gov (United States)

    Xi, Ying; Song, Yizhi; Johnson, David M; Li, Meng; Liu, Huigang; Huang, Yingping

    2018-06-15

    A pot-culture experiment was conducted to assess the effects of selenium (Se) (0.5 mg kg -1 ) on Trifolium repens exposed to various levels of diesel (0, 15, 20, 25 g kg -1 ) for 30 days and 60 days. Exposure to diesel for 60 day led to concentration-dependent decreases in root morphogenesis, chlorophyll content and CAT activity, and to dose-dependent increases in MDA content and SOD activity. The residual diesel concentration in soil increased and the removal efficiency decreased with soil diesel concentration. The chlorophyll content and residual diesel concentration after were slightly higher at 30 days than at 60days. Application of Se to soil increased Trifolium repens tolerance to diesel and significantly increased the phytoremediation effect at 60 days, with a removal rate of 36 ± 8%, compared to 28 ± 7% in the control. These results contribute to the ongoing effort to develop an effective phytoremediation system for soils highly contaminated by diesel. Copyright © 2018 Elsevier Inc. All rights reserved.

  11. Influence of long-term fertilization on the selenium content of calcareous chernozem soil.

    Science.gov (United States)

    Blagojević, S; Jakovljević, M; Zarković, B

    1998-01-01

    Available data on the selenium (Se) content in Yugoslavian soils indicate that the element is present in small amounts (chernozem soil. The experiment of the Maize Research Institute in Belgrade was set up in 1971 and soil samples were examined by chemical analysis after 23 years. The following important conclusions can be drawn based on the analytical data obtained. The total content of Se in the investigated experimental variants in calcareous chernozem soil ranges from 166 to 593 microg/kg. All the variants had a higher content of Se than soil samples taken before the experiment was set up. Comparison with the control (variant without fertilizers) indicated that the Se content increased in the experimental variants where farmyard manure had been applied. This effect was noticed to a depth of 80 cm. Application of farmyard manure should be considered as a means of increasing the levels of Se in Se-deficient soil. Correlation coefficients between total Se content in the soil and some important agrochemical properties of the investigated soils are presented in this paper.

  12. Studies on Inx(As2Se31-x thin films using variable angle spectroscopic ellipsometry (VASE

    Directory of Open Access Journals (Sweden)

    Amin G. A. M.

    2015-09-01

    Full Text Available The results of multi-angle ellipsometrical measurements of thermally evaporated Inx(As2Se31-x (x = 0, 0.01,0.05 films are presented. Optical parameters n and Es of thin Inx(As2Se31-x films show that indium atoms were incorporated into the host matrix of As2Se3 forming distinct features depending on the indium concentration. Refractive index, n, was found to decrease with the addition of In to the binary As2Se3. The real and imaginary parts of the dielectric function, ε' and ε" were also calculated from the obtained data and correlated with In concentration. It was found that e' decreases with the increase of In content while ε" increases with the increase of In content. Absorption edge is shifted towards lower photon energy with the increase of In content. As a result, the optical energy gap decreases with increasing In content. This has been correlated with the chemical character of the additive as well as with the structural and bonding aspects of the amorphous composition. Nonlinear optical constants (χ(3 and n2 were determined from linear optical parameters using semi-empirical relations in the long wavelength limit.

  13. Selenium biofortification of broccoli and carrots grown in soil amended with Se-enriched hyperaccumulator Stanleya pinnata

    Science.gov (United States)

    Amending soils with Se-hyperaccumulator plant derived sources of selenium (Se) may be useful for increasing Se content in food crops in Se-deficient regions of the world. In this study, we evaluated total Se and the different chemical species of Se in broccoli and carrots grown in soils amended with...

  14. Speciation of Se and DOC in soil solution and their relation to Se bioavailability.

    Science.gov (United States)

    Weng, Liping; Vega, Flora Alonso; Supriatin, Supriatin; Bussink, Wim; Van Riemsdijk, Willem H

    2011-01-01

    A 0.01 M CaCl(2) extraction is often used to asses the bioavailability of plant nutrients in soils. However, almost no correlation was found between selenium (Se) in the soil extraction and Se content in grass. The recently developed anion Donnan membrane technique was used to analyze chemical speciation of Se in the 0.01 M CaCl(2) extractions of grassland soils and fractionation of DOC (dissolved organic carbon). The results show that most of Se (67-86%) in the extractions (15 samples) are colloidal-sized Se. Only 13-34% of extractable Se are selenate, selenite and small organic Se (<1 nm). Colloidal Se is, most likely, Se bound to or incorporated in colloidal-sized organic matter. The dominant form of small Se compounds (selenate, selenite/small organic compounds) depends on soil. A total of 47-85% of DOC is colloidal-sized and 15-53% are small organic molecules (<1 nm). In combination with soluble S (sulfur) and/or P (phosphor), concentration of small DOC can explain most of the variability of Se content in grass. The results indicate that mineralization of organic Se is the most important factor that controls Se availability in soils. Competition with sulfate and phosphate needs to be taken into account. Further research is needed to verify if concentration of small DOC is a good indicator of mineralization of soil organic matter.

  15. Genetically engineered plants with increased vegetative oil content

    Science.gov (United States)

    Benning, Christoph

    2017-05-23

    The invention relates to genetically modified agricultural plants with increased oil content in vegetative tissues, as well as to expression systems, plant cells, seeds and vegetative tissues related thereto.

  16. Increased mitochondrial content in remyelinated axons: implications for multiple sclerosis

    Science.gov (United States)

    Zambonin, Jessica L.; Zhao, Chao; Ohno, Nobuhiko; Campbell, Graham R.; Engeham, Sarah; Ziabreva, Iryna; Schwarz, Nadine; Lee, Sok Ee; Frischer, Josa M.; Turnbull, Doug M.; Trapp, Bruce D.; Lassmann, Hans; Franklin, Robin J. M.

    2011-01-01

    Mitochondrial content within axons increases following demyelination in the central nervous system, presumably as a response to the changes in energy needs of axons imposed by redistribution of sodium channels. Myelin sheaths can be restored in demyelinated axons and remyelination in some multiple sclerosis lesions is extensive, while in others it is incomplete or absent. The effects of remyelination on axonal mitochondrial content in multiple sclerosis, particularly whether remyelination completely reverses the mitochondrial changes that follow demyelination, are currently unknown. In this study, we analysed axonal mitochondria within demyelinated, remyelinated and myelinated axons in post-mortem tissue from patients with multiple sclerosis and controls, as well as in experimental models of demyelination and remyelination, in vivo and in vitro. Immunofluorescent labelling of mitochondria (porin, a voltage-dependent anion channel expressed on all mitochondria) and axons (neurofilament), and ultrastructural imaging showed that in both multiple sclerosis and experimental demyelination, mitochondrial content within remyelinated axons was significantly less than in acutely and chronically demyelinated axons but more numerous than in myelinated axons. The greater mitochondrial content within remyelinated, compared with myelinated, axons was due to an increase in density of porin elements whereas increase in size accounted for the change observed in demyelinated axons. The increase in mitochondrial content in remyelinated axons was associated with an increase in mitochondrial respiratory chain complex IV activity. In vitro studies showed a significant increase in the number of stationary mitochondria in remyelinated compared with myelinated and demyelinated axons. The number of mobile mitochondria in remyelinated axons did not significantly differ from myelinated axons, although significantly greater than in demyelinated axons. Our neuropathological data and findings in

  17. Defect chalcopyrite Cu(In{sub 1-x}Ga{sub x}){sub 3}Se{sub 5} (0content Cu(In,Ga) Se{sub 2}-based solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Contreras, M.A.; Wiesner, H.; Niles, D.; Ramanathan, K.; Matson, R. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-05-01

    Crystallographic, optical, and electrical properties of defect chalcopyrite Cu(In{sub 1{minus}x}Ga{sub x}){sub 3}Se{sub 5} (0Se{sub 2} absorber materials is presented. Considering the chalcopyrite/defect chalcopyrite junction model, the authors postulate that the traditionally poor device performance of uniform high-Ga-content absorbers (x>0.3) is due to a relatively inferior character - both structural and electrical - at the very chalcopyrite/defect chalcopyrite interface. They demonstrate that this situation can be circumvented (for absorbers with x>0.3) by properly engineering such an interface by reducing Ga content in the region near the surface of the absorber.

  18. La comunicación publicitaria se pone de moda: branded content y fashion films / Advertising communication gets fashionable: branded content and fashion films

    Directory of Open Access Journals (Sweden)

    Cristina DEL PINO-ROMERO

    2015-01-01

    Full Text Available Los cambios vividos por la industria comunicativa en los últimos años, entre otros motivos debido al auge de las redes sociales, han convertido a los contenidos, informativos o de entretenimiento, en la piedra angular para hacer llegar el mensaje publicitario al destinatario. El esfuerzo por parte de los anunciantes de tener una estrategia de contenidos definida para su presencia en medios sociales o nuevos formatos comunicativos como el branded content, son ejemplo de que el advertainment está actualmente de moda. Este artículo se centra en el branded content y en otro ejemplo de esta tendencia: los fashion films, un nuevo género publicitario que ha irrumpido especialmente en los sectores de la moda y los productos de lujo, con el fin, entre otros, de ofrecer una nueva visión de éstos basada en la originalidad, contando historias que conecten con su público objetivo.

  19. Variation of Se, Zn, Co, Fe and Rb distribution in rats upon sequence of injection with SeO2 and glutathione

    International Nuclear Information System (INIS)

    Czauderna, M.; Samochocka, K.; Kwiathkowska, J.

    1984-01-01

    The contents of Se, Zn, Co, Fe and Rb in several organs of Wistar rats were determined by instrumental neutron activation analysis (INAA) after injections of SeO 2 and glutathione (GSH). Se was incorporated in all the examined organs, and the efficiency of incorporation does not depend upon the sequence of injection with SeO 2 and GSH. The sequence of these injections affects the contents of the other elements in all the examined organs. (author)

  20. Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue.

    Directory of Open Access Journals (Sweden)

    Jamil Cappelli

    Full Text Available Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of cortical thickness, 27% reduction in impact energy, and 10% reduction in work to peak force. Starting for this observation, we experimentally studied the effects of manganese supplementation in adults and yearling (yearlings red deer under a balanced diet. Subjects were 29 deer of different age classes (adult n = 19, yearlings n = 10 that were divided in a manganese injected group (n = 14 and a control group (n = 15. Antler content in ashes and minerals, intrinsic mechanical properties and cross section structure were examined at 4 points along the antler beam. A one way ANOVA (mean per antler showed that in yearlings, manganese supplementation only increased its content and that of Fe. However, in adults, Mn supplementation increased the mean content per antler of Ca, Na, P, B, Co, Cu, K, Mn, Ni, Se (while Si content was reduced, and impact work but not Young's modulus of elasticity, bending strength or work to peak force. A GLM series on characteristics in the uppermost part examined in the antler, often showing physiological exhaustion and depletion of body stores, showed also a 16% increase in work to peak force in the antlers of the treated group. Thus, manganese supplementation altered mineral composition of antler and improved structure and some mechanical properties despite animals having a balanced diet.

  1. Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue.

    Science.gov (United States)

    Cappelli, Jamil; Garcia, Andrés; Ceacero, Francisco; Gomez, Santiago; Luna, Salvador; Gallego, Laureano; Gambin, Pablo; Landete-Castillejos, Tomás

    2015-01-01

    Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of cortical thickness, 27% reduction in impact energy, and 10% reduction in work to peak force. Starting for this observation, we experimentally studied the effects of manganese supplementation in adults and yearling (yearlings) red deer under a balanced diet. Subjects were 29 deer of different age classes (adult n = 19, yearlings n = 10) that were divided in a manganese injected group (n = 14) and a control group (n = 15). Antler content in ashes and minerals, intrinsic mechanical properties and cross section structure were examined at 4 points along the antler beam. A one way ANOVA (mean per antler) showed that in yearlings, manganese supplementation only increased its content and that of Fe. However, in adults, Mn supplementation increased the mean content per antler of Ca, Na, P, B, Co, Cu, K, Mn, Ni, Se (while Si content was reduced), and impact work but not Young's modulus of elasticity, bending strength or work to peak force. A GLM series on characteristics in the uppermost part examined in the antler, often showing physiological exhaustion and depletion of body stores, showed also a 16% increase in work to peak force in the antlers of the treated group. Thus, manganese supplementation altered mineral composition of antler and improved structure and some mechanical properties despite animals having a balanced diet.

  2. Effect of selenium on the Hg, Zn, Fe and Co content of yeast cells

    International Nuclear Information System (INIS)

    Czauderna, M.; Peplowski, A.; Smolinski, S.

    1992-01-01

    The yeast cells, Saccharomyces cerevisiae, were exposed to Hg 2+ ions (10 -4 M) and SeO 2 (2x10 -4 -10 -2 M) or Se-methionine (2x10 -4 M). Instrumental neutron activation analysis (INAA) was used to analyze changes in the Hg, Zn,Fe and Co levels in these cells. When the yeast was incubated in a medium containing 10 -3 M and 10 -2 M Se) 2 , the Hg content of the yeast markedly increased. It was also found that the uptake of Se and Hg influenced the levels of Zn, Fe and Co found in the cells. While the presence of Se-methionine (Se-Met), SeO 2 or Hg 2+ ions caused increases in the intracellular Zn levels, the combined presence of Hg 2+ and SeO 2 and their assumed interaction, reduced the efficiency of Se for increasing the Zn content of yeast. (author) 17 refs.; 3 tabs

  3. Nanotube morphology changes for Ti-Zr alloys as Zr content increases

    International Nuclear Information System (INIS)

    Kim, Won-Gi; Choe, Han-Cheol; Ko, Yeong-Mu; Brantley, William A.

    2009-01-01

    Nanotube morphology changes in Ti-Zr alloys as Zr content increases have been investigated. Ti-Zr (10, 20, 30 and 40 wt.%) alloys were prepared by arc melting and heat treated for 24 h at 1000 o C in an argon atmosphere. TiO 2 nanotubes were formed on the Ti-Zr alloys by anodization in H 3 PO 4 containing 0.5 wt.% NaF. Electrochemical experiments were performed using a conventional three-electrode configuration with a platinum counter electrode and a saturated calomel reference electrode. Samples were embedded in epoxy resin, leaving an area of 10 mm 2 exposed to the electrolyte. Anodization was carried out using a scanning potentiostat, and all experiments were conducted at room temperature. Microstructures of the alloys were examined by optical microscopy (OM), field emission scanning electron microscopy (FE-SEM) and x-ray diffraction (XRD). The Ti-Zr alloy microstructures observed by OM and FE-SEM changed from a lamellar structure to a needle-like structure with increasing Zr content. The microstructures also changed from β phase to increasing amounts of α phase as the Zr content increased. The number of large nanotubes formed by anodization decreased, and the number of small nanotubes increased, as the Zr content increased. The mean inner diameter ranged from approximately 150 to 200 nm with a tube-wall thickness of about 20 nm. The interspace between the nanotubes was approximately 60, 70, 100 and 130 nm for Zr contents of 10, 20, 30 and 40 wt.%, respectively.

  4. In-situ XRD study of alloyed Cu2ZnSnSe4-CuInSe2 thin films for solar cells

    International Nuclear Information System (INIS)

    Hartnauer, Stefan; Wägele, Leonard A.; Jarzembowski, Enrico; Scheer, Roland

    2015-01-01

    We investigate the growth of Cu 2 ZnSnSe 4 -CuInSe 2 (CZTISe) thin films using a 2-stage (Cu-rich/Cu-free) co-evaporation process under simultaneous application of in-situ angle dispersive X-ray diffraction (XRD). In-situ XRD allows monitoring the phase formation during preparation. A variation of the content of indium in CZTISe leads to a change in the lattice constant. Single phase CZTISe is formed in a wide range, while at high In contents a phase separation is detected. Because of different thermal expansion coefficients, the X-ray diffraction peaks of ZnSe and CZTISe can be distinguished at elevated substrate temperatures. The formation of ZnSe appears to be inhibited even for low indium content. In-situ XRD shows no detectable sign for the formation of ZnSe. First solar cells of CZTISe have been prepared and show comparable performance to CZTSe. - Highlights: • In-situ XRD study of two-stage co-evaporated Cu 2 ZnSnSe 4 -CuInSe 2 alloyed thin films. • No detection of ZnSe with in-situ XRD due to Indium incorporation • Comparable efficiency of alloyed solar cells

  5. Effect of Sn additive on the structure and crystallization kinetics in Ge–Se alloy

    Energy Technology Data Exchange (ETDEWEB)

    Abd-Elrahman, M.I., E-mail: mostafaia11@yahoo.com; Hafiz, M.M.; Abdelraheem, A.M.; Abu-Sehly, A.A.

    2016-08-05

    The structure of Ge{sub 20}Se{sub 80−x}Snx glassy alloys and crystallization phases are identified using the X-ray diffraction (XRD) and Scanning Electron Microscope (SEM). The glass transition kinetics and the crystallization mechanism of the system are studied using Differential Scanning Calorimeter (DSC) under non-isothermal condition. The results reveal that glass transition temperature (Tg) increases with increasing Sn content which is attributed to the increase in the coordination number. The increase of the glass transition activation energy (Eg) with increasing Sn content is attributed to the decrease in the internal energy of the system as Sn increases. The compositional dependence of both glass forming ability and thermal stability are studied. From the experimental data, the thermal stability parameter (S) is found to be maximum for Ge{sub 20}Se{sub 78}Sn{sub 2} alloy, which indicates that this alloy is thermally more stable in the composition range under investigation. The effect of composition on the crystallization mechanism is discussed using different kinetic models. The crystallization activation energy (Ec) decreases with increasing Sn. This is attributed to the addition of Sn increases the tendency of crystallization. The calculated values of Avrami exponent (n) indicates the crystallization process occurs in one-and two dimensions for Sn is less than or equals 12 at%, respectively. - Highlights: • Glass and crystallization transitions in Ge{sub 20}Se{sub 80−x}Sn{sub x} candidate for devices. • The addition of Sn increases the tendency of Ge-Se alloy to crystallization. • The glass forming ability and thermal stability increase as Sn decreases. • The dimension of the crystals growth is one or two depending on the Sn content.

  6. Effect of adding Te to layered GaSe crystals to increase the van der Waals bonding force

    Science.gov (United States)

    Tanabe, Tadao; Zhao, Shu; Sato, Yohei; Oyama, Yutaka

    2017-10-01

    The interplanar binding strength of layered GaSe1-xTex crystals was directly measured using a tensile testing machine. The GaSe1-xTex crystals were grown by a low temperature liquid phase solution method under a controlled Se vapor pressure. The stoichiometry-controlled GaSe1-xTex crystal has the ɛ-polytype structure of GaSe, where the Te atoms are substituted for some of the Se atoms in the GaSe crystal. The effect of adding Te on the bonding strength between the GaSe layers was determined from direct measurements of the van der Waals bonding energy. The bonding energy was increased from 0.023 × 106 N/m2 for GaSe to 0.16 × 106 N/m2 for GaSe1-xTex (x = 0.106).

  7. Enhanced Thermoelectric Properties of Graphene/Cu2SnSe3 Composites

    Directory of Open Access Journals (Sweden)

    Degang Zhao

    2017-02-01

    Full Text Available Cu2SnSe3 material is regarded as a potential thermoelectric material due to its relatively high carrier mobility and low thermal conductivity. In this study, graphene was introduced into the Cu2SnSe3 powder by ball milling, and the bulk graphene/Cu2SnSe3 thermoelectric composites were prepared by spark plasma sintering. The graphene nanosheets distributed uniformly in the Cu2SnSe3 matrix. Meanwhile, some graphene nanosheets tended to form thick aggregations, and the average length of these aggregations was about 3 μm. With the fraction of graphene increasing, the electrical conductivity of graphene/Cu2SnSe3 samples increased greatly while the Seebeck coefficient was decreased. The introduction of graphene nanosheets can reduce the thermal conductivity effectively resulting from the phonon scattering by the graphene interface. When the content of graphene exceeds a certain value, the thermal conductivity of graphene/Cu2SnSe3 composites starts to increase. The achieved highest figure of merit (ZT for 0.25 vol % graphene/Cu2SnSe3 composite was 0.44 at 700 K.

  8. MLN64 induces mitochondrial dysfunction associated with increased mitochondrial cholesterol content

    Directory of Open Access Journals (Sweden)

    Elisa Balboa

    2017-08-01

    Full Text Available MLN64 is a late endosomal cholesterol-binding membrane protein that has been implicated in cholesterol transport from endosomal membranes to the plasma membrane and/or mitochondria, in toxin-induced resistance, and in mitochondrial dysfunction. Down-regulation of MLN64 in Niemann-Pick C1 deficient cells decreased mitochondrial cholesterol content, suggesting that MLN64 functions independently of NPC1. However, the role of MLN64 in the maintenance of endosomal cholesterol flow and intracellular cholesterol homeostasis remains unclear. We have previously described that hepatic MLN64 overexpression increases liver cholesterol content and induces liver damage. Here, we studied the function of MLN64 in normal and NPC1-deficient cells and we evaluated whether MLN64 overexpressing cells exhibit alterations in mitochondrial function. We used recombinant-adenovirus-mediated MLN64 gene transfer to overexpress MLN64 in mouse liver and hepatic cells; and RNA interference to down-regulate MLN64 in NPC1-deficient cells. In MLN64-overexpressing cells, we found increased mitochondrial cholesterol content and decreased glutathione (GSH levels and ATPase activity. Furthermore, we found decreased mitochondrial membrane potential and mitochondrial fragmentation and increased mitochondrial superoxide levels in MLN64-overexpressing cells and in NPC1-deficient cells. Consequently, MLN64 expression was increased in NPC1-deficient cells and reduction of its expression restore mitochondrial membrane potential and mitochondrial superoxide levels. Our findings suggest that MLN64 overexpression induces an increase in mitochondrial cholesterol content and consequently a decrease in mitochondrial GSH content leading to mitochondrial dysfunction. In addition, we demonstrate that MLN64 expression is increased in NPC cells and plays a key role in cholesterol transport into the mitochondria.

  9. Synthesis of single phase chalcopyrite CuIn1−xGaxSe2 (0 ≤ x ≤ 1) nanoparticles by one-pot method

    International Nuclear Information System (INIS)

    Han, Zhaoxia; Zhang, Dawei; Chen, Qinmiao; Hong, Ruijin; Tao, Chunxian; Huang, Yuanshen; Ni, Zhengji; Zhuang, Songlin

    2014-01-01

    Graphical abstract: - Highlights: • A facile and rapid one-pot synthesis method is presented. • The effects of various Ga contents are investigated. • Single phase chalcopyrite CuIn 1−x Ga x Se 2 nanoparticles can be easily synthesized. • The phase formation sequence is from CuSe to CuGaSe 2 , then to CuIn 1−x Ga x Se 2 . • The possible reaction mechanism of CuIn 1−x Ga x Se 2 nanoparticles is proposed. - Abstract: Single phase chalcopyrite and near stoichiometric CuIn 1−x Ga x Se 2 (0 ≤ x ≤ 1) nanoparticles were successfully synthesized by using a facile and rapid one-pot method. The effects of various Ga contents on crystal phase, morphology, element composition and absorption spectrum of the as-synthesized CuIn 1−x Ga x Se 2 nanoparticles were investigated in detail. The XRD and Raman patterns indicated that the as-synthesized nanoparticles had a single phase chalcopyrite structure, and the diffraction peaks shifted toward larger diffraction angles or higher frequencies with increasing Ga content. The FE-SEM images showed that the as-synthesized nanoparticles were polydispersed in both size and shape, and the nanoparticles with higher Ga content were more prone to aggregate. The Vis–IR absorption spectra showed strong absorption in the entire visible light region. The estimated band gap increased from 1.00 eV to 1.68 eV as Ga content increasing

  10. Selection of progenitors for increase in oil content in soybean

    Directory of Open Access Journals (Sweden)

    Josiane Isabela da Silva Rodrigues

    Full Text Available ABSTRACT The low genetic diversity brings limitation to breeding, because genetically similar genotypes share alleles in common, causing little complementarity and low vigor due to the low levels of heterozygosity in crosses. The objective of this work was to analyze the oil content and genetic diversity of soybean genotypes (Glycine max (L. Merrill based on QTL regions of this trait for choice of progenitors for increase in oil content. Twenty-two genotypes with wide variation in oil content, including cultivars with high oil contents, were cultivated in different Brazilian conditions and the oil content of the grains was quantified by infrared spectrometry. Microsatellite markers selected based on QTL regions for oil content in soybean were analyzed to estimate the genetic diversity. In these studies, a wide variation in oil content (17.28-23.01% and a reasonable diversity among the genotypes were observed, being PI181544 the most divergent genotype, followed by Suprema. The genotypes PI371610/Suprema and Suprema/CD01RR8384 showed genetic distance and higher oil contents in the grains, while the cultivars Suprema and CD01RR8384 had the highest oil contents and proved to be little genetically related. These genotypes are promising progenitors for selection of high oil content in soybean.

  11. Structural, optical and electrical characterization of Ag doped lead chalcogenide (PbSe) thin films

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ghamdi, A.A., E-mail: aghamdi90@hotmail.com [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah (Saudi Arabia); Al-Heniti, S. [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah (Saudi Arabia); Khan, Shamshad A. [Department of Physics, St. Andrew' s College, Gorakhpur, UP (India)

    2013-03-15

    Research and development efforts are currently underway to fabricate a variety of solid state devices. A good deal of information regarding the synthesis, structural, optical and electrical properties of Ag doped lead chalcogenides have been revealed. The bulk polycrystalline (PbSe){sub 100-x}Ag{sub x} ternary chalcogenides are prepared by diffusion technique. The XRD patterns recorded for the (PbSe){sub 100-x}Ag{sub x} thin films prepared by vacuum deposition technique, show that these films are polycrystalline in nature. The optical measurements reveal that the (PbSe){sub 100-x}Ag{sub x} thin films possess direct band gap and the band gap energy decreases with an increase of Ag concentration. The extinction coefficient (k) and refractive index (n) are found to be changing by increasing Ag concentration in PbSe. These results are interpreted in terms of the change in concentration of localized states due to the shift in Fermi level. The dc conductivities of (PbSe){sub 100-x}Ag{sub x} thin films are measured in temperature range 303-403 K. It is observed that the dc conductivity increases at all the temperatures with an increase of Ag content in PbSe system. The experimental data suggests that the conduction is due to thermally assisted tunneling of the charge carriers in the localized states near the band edges. The activation energy and optical band gap are found to decrease with increasing Ag concentration in lead chalcogenide and there are good agreements between these two values. - Highlights: Black-Right-Pointing-Pointer (PbSe){sub 100-x}Ag{sub x} thin films has been investigated. Black-Right-Pointing-Pointer Polycrystalline nature has been verified by X-ray diffraction. Black-Right-Pointing-Pointer Optical absorption data showed the rules of direct transitions predominate. Black-Right-Pointing-Pointer Dc conductivity increases with an increase of Ag content in PbSe system. Black-Right-Pointing-Pointer Increase of Ag concentration causes a decrease in E{sub g

  12. Increasing β-carotene content of phytoplankton Dunaliella salina using different salinity media

    Science.gov (United States)

    Hermawan, J.; Masithah, E. D.; Tjahjaningsih, W.; Abdillah, A. A.

    2018-04-01

    Dunaliella salina have got great attention in the nutritional, pharmaceutical and cosmetic companies because contain β-carotene. β-carotene functions as antioxidants and precursors of vitamin A and can treat tumors and cancer in humans. The content of β-carotene in D. salina can be increased by increasing salinity levels in the culture medium. The aim of this study was to determine whether increasing salinity may increas β-carotene content of phytoplankton D. salina. The research use data collection method with direct observation and then analyzed the result with descriptive method. The results showed that different salinity of media can influenced β-carotene content of D. salina. The highest β-carotene content of D. salina was at treatment B (30 ppt) which equal to 2.312 mg/L on 10th day. The production of β-carotene in D. salina can be increased was other environmental stress treatments in the form of stress-temperature, light and nutrients using.

  13. Evaluation of Selenium Content of Plant Samples Collected from Indigenous Sources for Se-supplementation

    International Nuclear Information System (INIS)

    Mahmud, T.; Sosan, A.; Rehman, R.; Abbas, A.

    2010-01-01

    Selenium contents were evaluated in different plant species such as Canola (Brassica napus), Sunflower (Helianthus annus), Turmeric (Curcuma longa), Soyabean Seeds (Glycine max) and Akk (Calotropis procera) in order to access their possibility for Se-supplementation. The dry ash of bulb of Turmeric and seeds of Canola, Sunflower, and Soyabean were digested in concentrated HNO/sub 3/, HClO/sub 4/ and HCl to obtain selenium (IV). After adding different reagents, stable blue colored complex was formed. From this colored complex, selenium (IV) was determined by UV/visible spectrophotometer. This work was carried out in an attempt to obtain information concerning the amount of selenium present in different plants. It was observed that Akk is a good accumulator of selenium as it contains almost 30 mu g selenium per gram and can be used for different medicinal applications. (author)

  14. Impact of sodium on the secondary phases and current pathway in Cu{sub 2}(Zn,Sn)Se{sub 4} thin film solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yi-Cheng, E-mail: ielinyc@cc.ncue.edu.tw [Department of Mechatronics Engineering, National Changhua University of Education, Changhua, Taiwan (China); Lai, Chien-Mu [Department of Mechatronics Engineering, National Changhua University of Education, Changhua, Taiwan (China); Hsu, Hung-Ru [Green Energy & Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu, Taiwan (China)

    2017-05-01

    In this study, we investigated the influence of Na content on secondary phases and current pathway in Cu{sub 2}(Zn,Sn)Se{sub 4} (CZTSe) thin film solar cells with the following structure: Ti/Mo:Na/Mo/CZTSe/CdS/i-ZnO/ZnO:Al/Al. The application of Na-doped Mo target as a source of sodium. Experimental results demonstrate that increasing the Na content leads to an increase in the quantity of secondary phase SnSe{sub 2} on the surface of the absorber layer; however, it did not appear to affect the secondary phases of Cu{sub 2}SnSe{sub 3} (CTSe) or ZnSe. Excessive quantities of Na were shown to have an adverse effect on device efficiency. Our results using conductive atomic force microscopy (C-AFM) revealed that an increase in the quantity of secondary phase SnSe{sub 2} can shift the current pathway on the surface of CZTSe from CZTSe grain boundaries (GBs) to the SnSe{sub 2} grains. The role of secondary phase SnSe{sub 2} of the CZTSe acted as a channel for the current flow, which results in high leakage current and low device efficiency. - Highlights: • Increasing the Na content leads to an increase in the quantity of secondary phase SnSe{sub 2}. • An increase of secondary phase SnSe{sub 2} can shift the current pathway from CZTSe grain boundaries to the SnSe{sub 2} grains. • The secondary phase SnSe{sub 2} acted as a channel for the current flow, which results in high leakage current.

  15. Intercalation compounds of NbSe2 und SnSe2. Model systems for low-dimensional superconductors

    International Nuclear Information System (INIS)

    Herzinger, Michael

    2013-01-01

    Quasi-two-dimensional (2D) metal dichalcogenides have received considerable research interest since their complex anisotropic electronic properties can be controlled by the intercalation of donor species. Although layered dichalcogenides have been studied by many aspects of chemical and physical properties, their two-dimensional character is only poorly understood. The present work deals with the layer-shaped dichalcogenides SnSe 2 and NbSe 2 . The host-material SnSe 2 was synthesized by chemical transport with Iodine as transport agent in sealed quartz ampoules. The intercalation of the semiconducting layered single crystals SnSe 2 with the organometallic compound cobaltocene (CoCp 2 ) leads to superconductivity up to T = 8 K. Ex-situ intercalation studies show an intercalation-mechanism outgoing from the host material 2H-SnSe 2 in a stage-2 phase which goes over in a stage-1 phase for higher intercalation degrees. In addition, SnSe 2 {CoCp 2 } x show remarkable low-temperature properties e.g. the coexistence of superconductivity and magnetism in dependence of the staging and cobaltocene-content of the material. Starting from an intercalation degree of 17% CoCp 2 long range ordered magnetism (with increasing saturation magnetization) was observed in 18R-SnSe 2 {CoCp 2 } x . Furthermore SnSe 2 {CoCp 2 } x show an extremely sensitive superconducting pinning behavior in very small magnetic fields partially below B 2 -content. A phase diagram was developed in dependence of the degree of intercalation over the whole range of intercalation between 0 % and 33 %. For comparison of the low-temperature character of SnSe 2 {CoCp 2 } x , another layer-shaped superconductor NbSe 2 was intercalated with CoCp 2 . The layered high-k s-wave superconductor 2H-NbSe 2 belongs to the most prominent low-dimensional materials studied during the past fifty years. After the discovery of the high temperature superconductor MgB 2 , a benchmark system for multi-band superconductivity, NbSe 2

  16. Foods with increased protein content: A qualitative study on European consumer preferences and perceptions.

    Science.gov (United States)

    Banovic, Marija; Arvola, Anne; Pennanen, Kyösti; Duta, Denisa E; Brückner-Gühmann, Monika; Lähteenmäki, Liisa; Grunert, Klaus G

    2018-06-01

    Foods with increased protein content have rapidly become one of the fastest-growing product categories targeting image- and health-focused consumers. However, it is not clear whether consumers really understand the difference between 'inherently rich in protein' and 'artificially increased protein'. This study used a qualitative focus group approach to investigate the consumer preferences and perceptions of foods with increased protein content among mixed-age and older population in four European countries. In total fifty-two participants were involved in the study. Understanding of the concept of foods with 'increased protein' content was limited. Both older and mixed-age participants could not differentiate between natural sources of protein and foods with increased protein content, no matter whether foods with animal or plant proteins were mentioned. Older participants expressed more scepticism towards foods with increased protein content than mixed-age participants. The combination of protein type and food carrier closer to conventional foods received more acceptance among both older and mixed-age participants. Future use and acceptance of foods with increased protein content will depend on the extent to which consumer concerns about incorporating additional protein into a diet can be responded. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. Core–shell interaction and its impact on the optical absorption of pure and doped core-shell CdSe/ZnSe nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xinqin; Cui, Yingqi; Zeng, Qun; Yang, Mingli, E-mail: myang@scu.edu.cn [Institute of Atomic and Molecular Physics, Key Laboratory of High Energy Density Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610065 (China); Yu, Shengping [College of Chemistry and Environment Protection Engineering, Southwest University for Nationalities, Chengdu 610041 (China)

    2016-04-07

    The structural, electronic, and optical properties of core-shell nanoclusters, (CdSe){sub x}@(CdSe){sub y} and their Zn-substituted complexes of x = 2–4 and y = 16–28, were studied with density functional theory calculations. The substitution was applied in the cores, the shells, and/or the whole clusters. All these clusters are characterized by their core-shell structures in which the core-shell interaction was found different from those in core or in shell, as reflected by their bondlengths, volumes, and binding energies. Moreover, the core and shell combine together to compose a new cluster with electronic and optical properties different from those of separated individuals, as reflected by their HOMO-LUMO gaps and optical absorptions. With the substitution of Cd by Zn, the structural, electronic, and optical properties of clusters change regularly. The binding energy increases with Zn content, attributed to the strong Zn–Se bonding. For the same core/shell, the structure with a CdSe shell/core has a narrower gap than that with a ZnSe shell/core. The optical absorption spectra also change accordingly with Zn substitution. The peaks blueshift with increasing Zn concentration, accompanying with shape variations in case large number of Cd atoms are substituted. Our calculations reveal the core-shell interaction and its influence on the electronic and optical properties of the core-shell clusters, suggesting a composition–structure–property relationship for the design of core-shell CdSe and ZnSe nanoclusters.

  18. Crystal structure, Raman scattering and magnetic properties of CuCr2-xZrxSe4 and CuCr2-xSnxSe4 selenospinels

    Science.gov (United States)

    Pinto, C.; Galdámez, A.; Barahona, P.; Moris, S.; Peña, O.

    2018-06-01

    Selenospinels, CuCr2-xMxSe4 (M = Zr and Sn), were synthesized via conventional solid-state reactions. The crystal structure of CuCr1.5Sn0.5Se4, CuCr1.7Sn0.3Se4, CuCr1.5Zr0.5Se4, and CuCr1.8Zr0.2Se4 were determined using single-crystal X-ray diffraction. All the phases crystallized in a cubic spinel-type structure. The chemical compositions of the single-crystals were examined using energy-dispersive X-ray analysis (EDS). Powder X-ray diffraction patterns of CuCr1.3Sn0.7Se4 and CuCr1.7Sn0.3Se4 were consistent with phases belonging to the Fd 3 bar m Space group. An analysis of the vibrational properties on the single-crystals was performed using Raman scattering measurements. The magnetic properties showed a spin glass behavior with increasing Sn content and ferromagnetic order for CuCr1.7Sn0.3Se4.

  19. Effect of Se-enriched Organic Fertilizers on Selenium Accumulation in Corn and Soil

    Directory of Open Access Journals (Sweden)

    LI Sheng-nan

    2015-12-01

    Full Text Available The effect of two Se-enriched organic fertilizers (cow dung and rice straw biochar on selenium accumulation of corn growing in selenium deficient soil was studied with pot experiment. The results showed that corn accumulated more selenium and the selenium was much easier to convert from root to shoot in the corn plant with the application of Se-enriched cow dung than Se-enriched rice straw biochar. With the application of more organic fertilizer such as 25 t·hm-2 Se-enriched cow dung or 40 t·hm-2 Se-enriched rice straw biochar, the accumulation of selenium and growth status of corn were getting better than the other treatments. At the same time, as the application amount of Se-enriched organic fertilizers (cow dung and rice straw biochar increased, the total selenium content in the soil also increased, which positively correlated with each other.

  20. Free fatty acids increase hepatic glycogen content in obese males

    NARCIS (Netherlands)

    Allick, G.; Sprangers, F.; Weverling, G. J.; Ackermans, M. T.; Meijer, A. J.; Romijn, J. A.; Endert, E.; Bisschop, P. H.; Sauerwein, H. P.

    2004-01-01

    Obesity is associated with increased hepatic glycogen content. In vivo and in vitro data suggest that plasma free fatty acids (FFA) may cause this increase. In this study we investigated the effect of physiological plasma FFA levels on hepatic glycogen metabolism by studying intrahepatic glucose

  1. Thermoelectric and Transport Properties of N-Type Bi{sub 2−x}Sb{sub x}Te{sub 3−y}Se{sub y} Solid Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Eum, A-Young; Kim, Il-Ho [Korea National University of Transportation, Chungju (Korea, Republic of)

    2017-03-15

    Bi{sub 2−x}Sb{sub x}Te{sub 3−y}Se{sub y} (x = 0.1, 0.2 and y = 0.15, 0.3) solid solutions were prepared using encapsulated melting and hot pressing. The lattice constants decreased with increases in the Sb and the Se contents, which revealed the successful formation of solid solutions. The relative densities of the hot-pressed specimens were 95 - 98%. All specimens exhibited n-type conduction at temperatures from 323 K to 523 K, and the electrical conductivity slightly decreased with increasing temperature. With an increase in the Se content, the Seebeck coefficient increased while the electrical and the thermal conductivities decreased; thus, the dimensionless figure of merit could be improved. The maximum dimensionless figure of merit ZT{sub max} = 0.89 was obtained at 423 K for Bi{sub 1.8}Sb{sub 0.2}Te{sub 2.7}Se{sub 0.3}. An increase in the Sb content resulted in a decrease in the lattice thermal conductivity because of an increase in alloy scattering, but its effect on the electrical properties was not superior to the effect of Se substitution. Therefore, Sb substitution could effectively control the thermal properties while Se substitution could effectively control the electrical properties.

  2. On Some Physical Properties of GeSe3-Sb2Se3-ZnSe Thin Films and Their Radiation Response

    International Nuclear Information System (INIS)

    Hosni, H.M.M.A.

    2010-01-01

    Thin films of the chalcogenides GeSe 3 , Sb 2 Se 3 , ZnSe, (GeSe 3 )80(Sb 2 Se 3 )20 and (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20, are prepared by thermal evaporation onto glass substrates. The effect of ZnSe incorporation with both GeSe 3 , Sb 2 Se 3 results in amorphous (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 composition as obtained from the X-ray analysis. Electrical measurements reveal a decrease in dc activation energy, ΔEdc, and an increase in ac activation energy, ΔEac, for (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 as compared with (GeSe 3 )80(Sb 2 Se 3 )20. Optical energy gap, Eg, and band tail width, Ee, are estimated in UV/VIS spectral region for fresh and γ-irradiated films, revealing a decrease in Eg and an increase in Ee for ZnSe and (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 compositions, with irradiation dose.

  3. EFFORT INCREASING STARCH’S CONTENT OF ARROWROOT WITH BOKHASI AND SOIL PROCESSING TREATMENT

    Directory of Open Access Journals (Sweden)

    Bambang Rudianto W

    2013-01-01

    Full Text Available Objective this experiment knows: (1 Effect bokashi on growth and yield arrowroot,(2 optimal dosage bokashi to increase arrowroot production,(3 effect planting depth on growth and yield arrowroot , and (4 interactions between planting depth and bokashi's manure dose on arrowroot. Research carried at field experimental Agriculture Faculty of Jenderal Soedirman University, October 2010 until March 2011. Experiment used inceptisol soil and 110 meters above sea level. Experimental design was Completely Randomized Block Design with four replicates, tried factors were planting depth and bokashi's fertilizer addition. Result: bokashi increase starch's content of arrowroot from 17,38 percent to 19,63 percent. Addition of bokashi at three percent of organic matter content soil, indicated by starch content of 19,634 percent. Planting depth at 20 cm affected increasing tubber volume per plant, tubber fresh weight, and production per extends, meanwhile planting depth at 30 cm affected increasing starch's contents tubber arrowroot. Interaction between planting depth and bokashi's fertilizer on starch's content yielded 19,898 percent at addition of bokashi at amount of three percent and planting depth 30 cm.

  4. Structural manifestations of aging in Se-rich glasses

    Science.gov (United States)

    Dash, S.; Ravindren, S.; Chen, P.; Boolchand, P.

    2015-03-01

    We examine weakly cross-linked GexSe100-x (0%modulated DSC and Raman scattering experiments. Homogeneity of melts was carefully verified using FT-Raman line profiling. Upon aging at RT for 4 months, we find the width of the glass transition W(x) steadily decreasing from 10C at 7% Ge to 2C for pure Se. The 5-fold reduction of W(x) with a decrease of Ge content is accompanied by a 2-fold increase in the non-reversing enthalpy. Rejuvenation of the aged glasses changes W(x) from 15C at 7% Ge to 7C for pure Se. Tg is found to decrease upon rejuvenation with the difference (Tg(aged)-Tg(rejuv)) showing a maximum near 3% Ge and vanishing for pure Se and 6% of Ge, which are topological thresholds. These results in Se-rich glasses are consistent with aging induced decoupling of Se8 crowns and growth of extended range structural correlations between polymeric Sen chains due to lone pair interactions. At higher x, near 8-10% of Ge, eutectic effects are manifested. Work supported by NSF Grant DMR 08-53957.

  5. Radiotherapy for head and neck malignancies is associated with increased salivary platelet-activating factor content

    International Nuclear Information System (INIS)

    Hlavaty, T.E.; Fisher, R.; Robbins, M.E.C.; Wheeler, J.; Funk, G.; Hussey, D.H.

    1996-01-01

    Purpose/Objective: Oral mucositis, characterized by pronounced erythema, edema, atrophy, and ulceration, remains a common complication of radiotherapeutic treatment of head and neck malignancies. These radiation-induced morbidities can cause a temporary cessation or indeed reduction in the extent of radiotherapy dose employed, compromising the likelihood of tumor cure. The precise pathogenic mechanisms involved in the development of radiation mucositis remain ill-defined. Platelet-activating factor (PAF), a pivotal mediator of acute inflammatory reactions, has been implicated in radiation-induced mucositis (McManus et al Lab Invest 68:118-124 1993). However, these data are limited in terms both of patient numbers, and time-course. The present study evaluated saliva PAF levels in patients receiving radiotherapy for head and neck malignancies in terms of levels prior to, during, and after the completion of radiotherapy. Materials and Methods: Saliva samples (1-2 mL) were obtained from 14 patients with oral cancer, and from 14 control non-malignant individuals. Saliva samples from the oral cancer patients were collected prior to the initiation of treatment, after the administration of 30 Gy, and at the completion of the course of radiotherapy. PAF was extracted from the saliva samples using a chloroform methanol mixture (2:1). Further purification was accomplished by washing the extracts through silica minicolumns. Measurements of PAF content were performed using a scintillation proximity assay system (Amersham, UK). This combined the use of a high specific activity 3 H-PAF with an antibody specific for PAF. Results: The PAF content of saliva obtained from patients prior to the initiation of radiotherapy was 226 ± 55 ng/mL, (mean ± SE). This was significantly greater than the value of 25 ± 11 ng/mL (p value = 0.003; 2-tail t test) measured in the saliva from the control individuals. Irradiation was associated with a significant increase in the PAF content of saliva

  6. Contractions but not AICAR increase FABPpm content in rat muscle sarcolemma

    DEFF Research Database (Denmark)

    Jeppesen, Jacob; Albers, Peter; Luiken, Joost J.

    2009-01-01

    FAT/CD36 and FABPpm protein expression, measured in lysates with western blotting, by either stimulus. AMPK thr172 and ERK1/2 thr202/204 phosphorylation were significantly increased with muscle contractions (P ...In the present study, it was investigated whether acute muscle contractions in rat skeletal muscle increased the protein content of FABPpm in the plasma membrane. Furthermore, the effect of AICAR stimulation on FAT/CD36 and FABPpm protein content in sarcolemma of rat skeletal muscle was evaluated....... METHODS: Male wistar rats (150 g) were anesthetized and either subjected to in situ electrically induced contractions (hindlimb muscles: 20 min, 10-20 V, 200 ms trains, 100 Hz) or stimulated with the pharmacological activator of AMPK, AICAR. To investigate changes in the content of FABPpm and FAT/CD36...

  7. An Improved Variant of Soybean Type 1 Diacylglycerol Acyltransferase Increases the Oil Content and Decreases the Soluble Carbohydrate Content of Soybeans.

    Science.gov (United States)

    Roesler, Keith; Shen, Bo; Bermudez, Ericka; Li, Changjiang; Hunt, Joanne; Damude, Howard G; Ripp, Kevin G; Everard, John D; Booth, John R; Castaneda, Leandro; Feng, Lizhi; Meyer, Knut

    2016-06-01

    Kinetically improved diacylglycerol acyltransferase (DGAT) variants were created to favorably alter carbon partitioning in soybean (Glycine max) seeds. Initially, variants of a type 1 DGAT from a high-oil, high-oleic acid plant seed, Corylus americana, were screened for high oil content in Saccharomyces cerevisiae Nearly all DGAT variants examined from high-oil strains had increased affinity for oleoyl-CoA, with S0.5 values decreased as much as 4.7-fold compared with the wild-type value of 0.94 µm Improved soybean DGAT variants were then designed to include amino acid substitutions observed in promising C. americana DGAT variants. The expression of soybean and C. americana DGAT variants in soybean somatic embryos resulted in oil contents as high as 10% and 12%, respectively, compared with only 5% and 7.6% oil achieved by overexpressing the corresponding wild-type DGATs. The affinity for oleoyl-CoA correlated strongly with oil content. The soybean DGAT variant that gave the greatest oil increase contained 14 amino acid substitutions out of a total of 504 (97% sequence identity with native). Seed-preferred expression of this soybean DGAT1 variant increased oil content of soybean seeds by an average of 3% (16% relative increase) in highly replicated, single-location field trials. The DGAT transgenes significantly reduced the soluble carbohydrate content of mature seeds and increased the seed protein content of some events. This study demonstrated that engineering of the native DGAT enzyme is an effective strategy to improve the oil content and value of soybeans. © 2016 American Society of Plant Biologists. All Rights Reserved.

  8. Reduction of secondary phases in Cu{sub 2}SnSe{sub 3} absorbers for solar cell application

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Zeguo, E-mail: tangzg@fc.ritsumei.ac.jp [Ritsumeikan Global Innovation Research Organization, Ritsumeikan University, Shiga (Japan); Nukui, Yuki; Kosaka, Kiichi; Ashida, Naoki; Uegaki, Hikaru; Minemoto, Takashi [College of Science and Engineering, Ritsumeikan University, Shiga (Japan)

    2014-09-01

    Highlights: • Cu{sub 2}SnSe{sub 3} thin films for absorber of solar cell are fabricated by selenization of Cu–Sn precursors. • Secondary phase of Cu{sub 2–x}Se can be suppressed via using Se and SnSe mixture powders as Se source. • Selective etching of secondary phase of Cu{sub 2–x}Se is realized by potassium cyanide solution. • Cu{sub 2–x}Se rather than SnSe makes major contribution to the high carrier concentration of CTSe films. - Abstract: The creation of secondary phases, such as Cu{sub 2−x}Se and SnSe, and their influence on electrical properties of Cu{sub 2}SnSe{sub 3} (CTSe) thin films fabricated by selenization of Cu–Sn metal precursors are investigated. The Cu{sub 2−x}Se content in CTSe films is estimated via deconvolution of grazing incidence X-ray diffraction (GIXRD) patterns, and the results suggest that the Cu{sub 2−x}Se content increases with the increasing Cu/Sn ratio in metal precursors. We also found that using Se and SnSe mixture powders as Se source is an effective approach to suppress the creation of Cu{sub 2−x}Se secondary phase. Meanwhile, selective etching of Cu{sub 2−x}Se is realized by potassium cyanide (KCN) solution. Hall measurement results reveal that the secondary phase of Cu{sub 2−x}Se rather than SnSe makes major contribution to the high carrier concentration (larger than 10{sup 18} cm{sup −3}) of CTSe films. The approach to further decrease the carrier concentration in CTSe films is discussed.

  9. Differential thermal analysis of the glassy system AsSe-AsTe

    International Nuclear Information System (INIS)

    El Den, M.B.; El Mously, M.K.

    1986-11-01

    Thermal induced phase transformation for the system AsSe-AsTe has been studied using DTA. The dependence of the characteristic temperature Tg, Tc and Tm on the ratio of Se/Tc has been determined. The increase of Te content leads to the decrease of both Tg and Tc, i.e. tellurium enhances the crystallization process in these glasses exactly as in the case of AsSe 3/2-x Te x and AsSe 5/2-x Te x . The kinetic calculations have also been tried. Reasonable results have been obtained for two compositions only AsSe 0.5 Te 0.5 and AsSe 0.1 Te 0.9 with E cryst equal to 31.0 kcal/mole for the first and 45 and 65 kcal/mole for the second. The other compositions either do not crystallize completely or have complicated and overlapped peaks. (author)

  10. Use of INAA to study the determination of Se, Th, Zn, Co and Fe levels of yeast cells

    International Nuclear Information System (INIS)

    Czauderna, M.; Turska, M.; Sitowska, B.

    1996-01-01

    Differences in the effects of seleno-cystine (CySe) 2 , glutathione (GSH), Se(IV) [as SeO 2 ] and Se(VI) [as (NH 4 ) 2 SeO 4 ] on Th(IV) [as Th(CO 3 ) 2 ] uptake by the cells, Saccharomyces cerevisiae, have been studied. The Th, Se, Zn, Co and Fe levels of the yeast cells were measured by instrumental neutron activation analysis. Results obtained show that the addition of Th alone to the culture medium resulting in the Th content of the cells and the Th level of the yeast slightly decreased during the incubation. The addition of Th in combination with GSH produced a higher decrease of the Th content in comparison with the single Th dosage. During the initial 48 h of the incubation the presence of Th and Se(VI) in the medium produced a decrease of the Th level of the cells in comparison with the addition of Th alone. (CySe) 2 or SeO 2 does not produce a regular change of the Th level of the cells. Th uptake by the yeast influenced the retention of Se in the cells. In fact, the Se levels of the cells were always significantly higher when the yeast was incubated in the medium containing Th and SeO 2 or Se(VI). The enhance in the Se level of the cells rises increasing concentrations of SeO 2 in the culture medium. Th decreased the Se content of the yeast when the cells were incubated in the medium containing (CySe) 2 and Th. GSH supply in combination with Th and SeO 2 produced a very significant enhancement of the Se abundance in the cells in comparison with the single addition of SeO 2 . Se-compounds and/or Th dosages affected the Zn, Co and Fe contents of the cells. The Fe level of the yeast is below the quantitative detection limit of Fe when the cells were incubated in the medium containing Th. (Author)

  11. Chemical bath deposition of Hg doped CdSe thin films and their characterization

    International Nuclear Information System (INIS)

    Bhuse, V.M.

    2005-01-01

    The deliberate addition of Hg in CdSe thin film have been carried out using a simple, modified, chemical bath deposition technique with the objective to study the effect of Hg doping on properties of CdSe thin films. Synthesis was initiated at 278 K temperature using complexed cadmium sulphate, mercuric nitrate and sodium selenosulphate in an aqueous ammonical medium at pH 10. Films were characterized by XRD, SEM, optical absorption, electrical and thermoelectric techniques. The 'as deposited' films were uniform, well adherent, nearly stoichiometric and polycrystalline in a single cubic phase (zinc blende). Crystallite size determined from XRD and SEM was found to increase slightly with addition of Hg. The optical band gap of CdSe remains constant upto 0.05 mol% Hg doping, while it decreases monotonically with further increase in mercury content. Dark dc electrical resistivity and conduction activation energy of CdSe were found to decrease initially upto 0.05 mol% of Hg, thereafter increased for higher values of Hg but remains less than those of CdSe. All the films showed n-type of conductivity. A CdSe film containing 0.05 mol% of Hg showed higher absorption coefficient, and conductivity

  12. Effect of In addition on some physical properties of Sn20Se(60-x) Bi20 amorphous films

    International Nuclear Information System (INIS)

    Amer, H.H.; Abdel-wahab, A.A.; Abdel-Mongy, A.

    2012-01-01

    The present paper reports the effect of replacement of selenium by indium on the optical gap and some other physical parameters of new quaternary chalcogenide In x Sn 20 Se (60-x) Bi 20 (x = 0, 0.1, 0.2 and 0.3 at. %) thin films. Thin films with thickness 100 nm of In x Sn 20 Se (60-x) Bi 20 were prepared by thermal evaporation of the bulk samples. Increasing indium content is found to affect the average heat of atomization, the average coordination number, the number of constraints and the cohesive energy of the In x Sn 20 Se (60-x) Bi 20 alloys. Optical absorption measurements showed that the fundamental absorption edge is a function of composition. The optical absorption is due to allowed non-direct transition and the energy gap decreases with the increase of indium content. The chemical bond approach has been applied successfully to interpret the decrease of the optical gap with increasing indium content. The prepared films were irradiated by gamma rays at doses up to 15 Mrad. It was found that the compositions were almost stable against gamma radiation.

  13. An Improved Variant of Soybean Type 1 Diacylglycerol Acyltransferase Increases the Oil Content and Decreases the Soluble Carbohydrate Content of Soybeans[OPEN

    Science.gov (United States)

    Shen, Bo; Damude, Howard G.; Everard, John D.; Booth, John R.

    2016-01-01

    Kinetically improved diacylglycerol acyltransferase (DGAT) variants were created to favorably alter carbon partitioning in soybean (Glycine max) seeds. Initially, variants of a type 1 DGAT from a high-oil, high-oleic acid plant seed, Corylus americana, were screened for high oil content in Saccharomyces cerevisiae. Nearly all DGAT variants examined from high-oil strains had increased affinity for oleoyl-CoA, with S0.5 values decreased as much as 4.7-fold compared with the wild-type value of 0.94 µm. Improved soybean DGAT variants were then designed to include amino acid substitutions observed in promising C. americana DGAT variants. The expression of soybean and C. americana DGAT variants in soybean somatic embryos resulted in oil contents as high as 10% and 12%, respectively, compared with only 5% and 7.6% oil achieved by overexpressing the corresponding wild-type DGATs. The affinity for oleoyl-CoA correlated strongly with oil content. The soybean DGAT variant that gave the greatest oil increase contained 14 amino acid substitutions out of a total of 504 (97% sequence identity with native). Seed-preferred expression of this soybean DGAT1 variant increased oil content of soybean seeds by an average of 3% (16% relative increase) in highly replicated, single-location field trials. The DGAT transgenes significantly reduced the soluble carbohydrate content of mature seeds and increased the seed protein content of some events. This study demonstrated that engineering of the native DGAT enzyme is an effective strategy to improve the oil content and value of soybeans. PMID:27208257

  14. Investigations on the structure of Pb-Ge-Se glasses

    Science.gov (United States)

    Kalra, G.; Upadhyay, M.; Sharma, Y.; Abhaya, S.; Murugavel, S.; Amarendra, G.

    2016-05-01

    Chalcogenide glasses have attracted much attention because of their potential application in various solid state devices. In the present work, we report here the detailed thermal, structural, microstructural studies on PbxGe42-xSe58 with (0 ≤ x ≤ 20) glasses. The influence of Pb content on the glass transition temperature, specific heat, and non-reversing enthalphy is observed and discussed qualitatively The Raman spectroscopic studies on the all the glass compositions are carried out and deconvoluted into different structural units. The positron annihilation life-time spectroscopy (PALS) studies helped to understand the nature of defect states present in the glassy system and its variation with Pb content. The concentration of charged defect centers is found to increase, whereas the open volume defect concentration decreases with Pb content in these glasses.

  15. Investigations on the structure of Pb-Ge-Se glasses

    International Nuclear Information System (INIS)

    Kalra, G.; Upadhyay, M.; Sharma, Y.; Murugavel, S.; Abhaya, S.; Amarendra, G.

    2016-01-01

    Chalcogenide glasses have attracted much attention because of their potential application in various solid state devices. In the present work, we report here the detailed thermal, structural, microstructural studies on Pb x Ge 42-x Se 58 with (0 ≤ x ≤ 20) glasses. The influence of Pb content on the glass transition temperature, specific heat, and non-reversing enthalpy is observed and discussed qualitatively The Raman spectroscopic studies on the all the glass compositions are carried out and deconvoluted into different structural units. The positron annihilation life-time spectroscopy (PALS) studies helped to understand the nature of defect states present in the glassy system and its variation with Pb content. The concentration of charged defect centers is found to increase, whereas the open volume defect concentration decreases with Pb content in these glasses.

  16. Compositional dependence of physical properties in Se-Sb-In glassy system

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Shaveta, E-mail: shaveta.sharma1987@yahoo.com; Sharma, Rita; Kumar, Praveen; Chander, Ravi; Thangaraj, R.; Mian, M. [Semiconductors Laboratory, Department of Physics, GND University, Amritsar (India)

    2015-08-28

    The growing interest in the investigation of the properties of chalcogenide glasses stems from their potential application as phase change recording media and photoconductive elements in solid state devices.In the present work, the different theoretical parameters viz. coordination number, constraints, number of lone pair electrons, bond energy, heat of atomization, mean bond energy and glass transition temperature for Se{sub 75-x}Sb{sub 25}In{sub x} (x= 0, 1, 3, 5, 7, 9, 11) chalcogenide system have been calculated and their composition variation has been discussed. It has been found that average heat of atomization increases with In content. The glass transition temperature and mean bond energy increases with In. An attempt has been made to explain the varying trend of various parameters with increasing In content.

  17. CuInSe2 nano-crystallite reaction kinetics using solid state reaction from Cu2Se and In2Se3 powders

    International Nuclear Information System (INIS)

    Hsiang, Hsing-I; Lu, Li-Hsin; Chang, Yu-Lun; Ray, Dahtong; Yen, Fu-Su

    2011-01-01

    Highlights: → CuInSe 2 phase increased gradually accompanied with a decrease in γ-In 2 Se 3 and no intermediate phase during calcination. → CuInSe 2 formation from Cu 2 Se and In 2 Se 3 powders follows a one-dimensional diffusion-controlled reaction with apparent activation energy of about 122.5 kJ/mol. → The solid reaction kinetics may be dominated by the diffusion of In 3+ ions. - Abstract: The reaction mechanism and CuInSe 2 formation kinetics using a solid state reaction from Cu 2 Se and In 2 Se 3 powders synthesized using a heating up process were investigated using X-ray diffractomy (XRD) and transmission electron microscopy (TEM). It was observed that the CuInSe 2 phase increased gradually, accompanied with a decrease in γ-In 2 Se 3 with no intermediate phase as the calcination temperature and soaking time were increased. The reaction kinetics was analyzed using the Avrami and polynomial kinetic model, suggesting that CuInSe 2 formation from Cu 2 Se and In 2 Se 3 powders follows a diffusion-controlled reaction with an apparent activation energy of about 122.5-182.3 kJ/mol. Cu 2 Se and In 2 Se 3 phases react and directly transform into CIS without the occurrence of any intermediate phase and the size of the newly formed CuInSe 2 crystallites was close to that of the Cu 2 Se reactant particle based on the TEM results, which indicated that the solid reaction kinetics may be dominated by the diffusion of In 3+ ions.

  18. Investigations on the structure of Pb-Ge-Se glasses

    Energy Technology Data Exchange (ETDEWEB)

    Kalra, G.; Upadhyay, M.; Sharma, Y.; Murugavel, S., E-mail: murug@physics.du.ac.in [Department of Physics and Astrophysics, University of Delhi, Delhi – 110007 (India); Abhaya, S.; Amarendra, G. [Materials Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam - 603 102 (India)

    2016-05-23

    Chalcogenide glasses have attracted much attention because of their potential application in various solid state devices. In the present work, we report here the detailed thermal, structural, microstructural studies on Pb{sub x}Ge{sub 42-x}Se{sub 58} with (0 ≤ x ≤ 20) glasses. The influence of Pb content on the glass transition temperature, specific heat, and non-reversing enthalpy is observed and discussed qualitatively The Raman spectroscopic studies on the all the glass compositions are carried out and deconvoluted into different structural units. The positron annihilation life-time spectroscopy (PALS) studies helped to understand the nature of defect states present in the glassy system and its variation with Pb content. The concentration of charged defect centers is found to increase, whereas the open volume defect concentration decreases with Pb content in these glasses.

  19. Oxidative stress by Se-deficiency and dynamics of biotrace elements

    International Nuclear Information System (INIS)

    Sakuma, Yasunobu; Tsuyuki, Satoshi; Nagayama, Atsuko; Matsuoka, Keisuke; Honda, Chikako; Endo, Kazutoyo

    2006-01-01

    Metal ions such as Mn, Fe, Cu, Zn, Se are located at the center of the antioxidants in biological systems. Selenium (Se) is contained in GSH-Px (glutathione peroxidase), one of the antioxidants, and is related to various other metal ions to keep redox balance in organism. In the present study, Mn contents in cell fractions of liver homogenates of Se-deficient rat, and control (normal) rats were determined by means of INAA. The results showed that the Mn contents in microsomal fraction of male Se-deficient rats were greater than the control for male rats, and that the trend was different for female rats. The results were presented together with the results of SOD and TBARS. (author)

  20. Photoluminescence properties of boron doped InSe single crystals

    International Nuclear Information System (INIS)

    Ertap, H.; Bacıoğlu, A.; Karabulut, M.

    2015-01-01

    Undoped and boron doped InSe single crystals were grown by Bridgman–Stockbarger technique. The PL properties of undoped, 0.1% and 0.5% boron doped InSe single crystals have been investigated at different temperatures. PL measurements revealed four emission bands labeled as A, B, C and D in all the single crystals studied. These emission bands were associated with the radiative recombination of direct free excitons (n=1), impurity-band transitions, donor–acceptor recombinations and structural defect related band (impurity atoms, defects, defect complexes, impurity-vacancy complex etc.), respectively. The direct free exciton (A) bands of undoped, 0.1% and 0.5% boron doped InSe single crystals were observed at 1.337 eV, 1.335 eV and 1.330 eV in the PL spectra measured at 12 K, respectively. Energy positions and PL intensities of the emission bands varied with boron addition. The FWHM of direct free exciton band increases while the FWHM of the D emission band decreases with boron doping. Band gap energies of undoped and boron doped InSe single crystals were calculated from the PL measurements. It was found that the band gap energies of InSe single crystals decreased with increasing boron content. - Highlights: • PL spectra of InSe crystals have been studied as a function of temperature. • Four emission bands were observed in the PL spectra at low temperatures. • PL intensity and position of free exciton band vary with doping and temperature. • Temperature dependences of the bands observed in the PL spectra were analyzed

  1. Low-temperature thermoelectric properties of Pb doped Cu2SnSe3

    Science.gov (United States)

    Prasad K, Shyam; Rao, Ashok; Gahtori, Bhasker; Bathula, Sivaiah; Dhar, Ajay; Chang, Chia-Chi; Kuo, Yung-Kang

    2017-09-01

    A series of Cu2Sn1-xPbxSe3 (0 ≤ x ≤ 0.04) compounds was prepared by solid state synthesis technique. The electrical resistivity (ρ) decreased with increase in Pb content up to x = 0.01, thereafter it increased with further increase in x (till x = 0.03). However, the lowest value of electrical resistivity is observed for Cu2Sn0.96Pb0.04Se3. Analysis of electrical resistivity of all the samples suggests that small poloron hoping model is operative in the high temperature regime while variable range hopping is effective in the low temperature regime. The positive Seebeck coefficient (S) for pristine and doped samples in the entire temperature range indicates that the majority charge carriers are holes. The electronic thermal conductivity (κe) of the Cu2Sn1-xPbxSe3 compounds was estimated by the Wiedemann-Franz law and found that the contribution from κe is less than 1% of the total thermal conductivity (κ). The highest ZT 0.013 was achieved at 400 K for the sample Cu2Sn0.98Pb0.02Se3, about 30% enhancement as compared to the pristine sample.

  2. Synthesis and characterization of ZnSe:Fe/ZnSe core/shell nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Lin; Zhu, Jianguo, E-mail: yanglin_1028@163.com; Xiao, Dingquan

    2014-04-15

    High-quality ZnSe:Fe/ZnSe core/shell nanocrystals were prepared via a hydrothermal microemulsion technique. Effective surface passivation of monodisperse ZnSe:Fe nanocrystals is achieved by overcoating them with a ZnSe shell. The samples were characterized by means of XRD, EDX, TEM, PSD, XPS, photoluminescence, and Raman spectrum. The results show that the as-synthesized nanocrystals are cubic zinc blende ZnSe structure with high purity and the average particle size of ZnSe:Fe/ZnSe core/shell nanocrystal is larger than that of ZnSe:Fe core. The growth of ZnSe shell causes a small red shift in PL spectra, and then the PL quantum yield (QY) increases from 16% before shell growth to the maximum of 37% after increasing shell thickness up to 1.2 monolayers (ML). Moreover, both transverse optic (TO) and longitudinal optic (LO) phonon modes of ZnSe are shifted toward lower frequency as compared with the reported ones. -- Highlights: • ZnSe:Fe/ZnSe core/shell QDs were prepared by a hydrothermal microemulsion method. • ZnSe shell efficiently passivates surface defects by serving as a physical barrier. • The particle size and PL properties can be turned with the growth of ZnSe shell. • The luminescence efficiency and stability of QDs could be improved in this manner.

  3. FOXO1 Content Is Reduced in Cystic Fibrosis and Increases with IGF-I Treatment

    Directory of Open Access Journals (Sweden)

    Arianna Smerieri

    2014-10-01

    Full Text Available Cystic fibrosis-related diabetes is to date the most frequent complication in cystic fibrosis (CF. The mechanisms underlying this condition are not well understood, and a possible role of insulin resistance is debated. We investigated insulin signal transduction in CF. Total insulin receptor, IRS1, p85 PI3K, and AKT contents were substantially normal in CF cells (CFBE41o-, whereas winged helix forkhead (FOXO1 contents were reduced both in baseline conditions and after insulin stimulation. In addition, CF cells showed increased ERK1/2, and reduced β2 arrestin contents. No significant change in SOCS2 was observed. By using a CFTR inhibitor and siRNA, changes in FOXO1 were related to CFTR loss of function. In a CF-affected mouse model, FOXO1 content was reduced in the muscle while no significant difference was observed in liver and adipose tissue compared with wild-type. Insulin-like growth factor 1 (IGF-I increased FOXO1 content in vitro and in vivo in muscle and adipose tissue. In conclusion; we present the first description of reduced FOXO1 content in CF, which is compatible with reduced gluconeogenesis and increased adipogenesis, both features of insulin insensitivity. IGF-I treatment was effective in increasing FOXO1, thereby suggesting that it could be considered as a potential treatment in CF patients possibly to prevent and treat cystic fibrosis-related diabetes.

  4. Selective Cytotoxic Activity of Se-Methyl-Seleno-L-Cysteine- and Se-Polysaccharide-Containing Extracts from Shiitake Medicinal Mushroom, Lentinus edodes (Agaricomycetes).

    Science.gov (United States)

    Klimaszewska, Marzenna; Górska, Sandra; Dawidowski, Maciej; Podsadni, Piotr; Szczepanska, Agnieszka; Orzechowska, Emilia; Kurpios-Piec, Dagmara; Grosicka-Maciag, Emilia; Rahden-Staroń, Iwonna; Turło, Jadwiga

    2017-01-01

    Numerous formulations derived from the shiitake medicinal mushroom, Lentinus edodes, demonstrate anticancer activities. We hypothesized that isolates from selenium (Se)-enriched mycelia of L. edodes would possess stronger cancer-preventive properties than current preparations. The aim of this study was to investigate whether the presence of Se-methyl-seleno-L-cysteine in mycelial extracts of L. edodes affects their cytotoxic activity (makes them stronger) or whether they are as effective as Se-containing polysaccharides. Extracts were prepared from Se-containing mycelia under various conditions and assayed for cytotoxic activity in cancer (PC3 and HeLa) and normal (HMEC-1) cell lines. The chemical composition of the extracts was examined; specifically, the amounts of potentially cytotoxic Se compounds (methylselenocysteine, selenomethionine, and Se-containing polysaccharides) were measured. The relationship between extract composition and biological activity was characterized. Mycelial cultures were cultivated in a 10-L bioreactor in medium enriched with sodium selenite. Mycelial extracts were prepared either at 100°C or at 4°C in acidic solution. Total Se content was determined using the atomic absorption spectrometry method, and methylselenocysteine and selenomethionine contents were measured using reverse-phase high-performance liquid chromatography. Protein, carbohydrate, and polyphenolic contents were determined with spectrophotometric methods, and Se-containing polysaccharides were measured with the use of precipitation. Anticancer activity of mycelial extracts was examined using the MTT cell viability assay. Extracts containing Se-methyl-seleno-L-cysteine or Se-polysaccharides prepared at 4°C and 100°C, respectively, display moderate, time-dependent, specific cytotoxic activity in HeLa and PC3 cell lines. The effect in HeLa cells is more pronounced in the extract prepared at 4°C than at 100°C. The effect is almost equal for the PC3 cell line. However

  5. Effect of nonstoichiometry properties of CuInSe2

    International Nuclear Information System (INIS)

    Rogacheva, E.I.; Tavrina, T.V.

    1997-01-01

    The homogeneity area size of the CuInSe 2 semiconductor compound is determined by the (CuIn)-Se profile of the Cu-In-Se ternary system at 350 deg C. The microhardness and thermo-electromotive force dependences on Se content are studied after various kind of thermal treatment. Interpretation of the results obtained is given with and account of defects formation character by deviations from stoichiometry [ru

  6. A simple solution-phase approach to synthesize high quality ternary AgInSe2 and band gap tunable quaternary AgIn(S1-xSe x)2 nanocrystals

    KAUST Repository

    Bai, Tianyu

    2014-01-01

    A facile solution-phase route for the preparation of AgInSe2 nanocrystals was developed by using silver nitrate, indium stearate, and oleylamine-selenium (OAm-Se) as precursors. The evolution process of the AgInSe2 nanocrystals is discussed in detail and different reaction conditions all have a great impact on the growth and morphology of the nanocrystals. Alloyed AgIn(S1-xSex)2 nanocrystals with controlled composition across the entire range (0 ≤ x ≤ 1) was also successfully prepared by modulating the S/Se reactant mole ratio. X-ray diffraction (XRD), energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) were used to confirm that the alloyed AgIn(S1-xSex)2 nanocrystals are homogeneous. The UV-vis absorption spectra revealed that the band gap energies of the alloyed AgIn(S1-xSex)2 nanocrystals could be continuously tuned by increasing the Se content. © The Royal Society of Chemistry 2014.

  7. Identification of Se trace element in the soybean using neutron activation analysis

    International Nuclear Information System (INIS)

    Sihombing, E.; Sri Wardani; Hamzah, A.

    1999-01-01

    Neutron Activation Analysis method has been developed as a fast analysis method with high sensitivity, accuracy and precision in determining distribution of element content of various types of seed food materials. In this research the element content of Se was determined by irradiating sample of black and white soybean that can be bought in the market. For determining the content of long decay time element of Se, a samples of 1.3 - 2.3 grams of seed was irradiated within 45 minutes where as for short decay time of Se, the 1,2 - 2,2 grams of seed was irradiated within 30 minutes in the reactor wall. The activated sample, then, was analyzed using gamma spectrometry method. The gamma spectrum was acquired with Hp Ge detector with counting time within 2 - 60 minutes. The results showed that there is a small deviation on Se's quantity of contents with vary between 154,2 and 165,8 ppb

  8. Thermoelectric properties of chalcogenide based Cu2+xZnSn1−xSe4

    Directory of Open Access Journals (Sweden)

    Ch. Raju

    2013-03-01

    Full Text Available Quaternary chalcogenide compounds Cu2+xZnSn1−xSe4 (0 ≤ x ≤ 0.15 were prepared by solid state synthesis. Rietveld powder X-ray diffraction (XRD refinements combined with Electron Probe Micro Analyses (EPMA, WDS-Wavelength Dispersive Spectroscopy and Raman spectra of all samples confirmed the stannite structure (Cu2FeSnS4-type as the main phase. In addition to the main phase, small amounts of secondary phases like ZnSe, CuSe and SnSe were observed. Transport properties of all samples were measured as a function of temperature in the range from 300 K to 720 K. The electrical resistivity of all samples decreases with an increase in Cu content except for Cu2.1ZnSn0.9Se4, most likely due to a higher content of the ZnSe. All samples showed positive Seebeck coefficients indicating that holes are the majority charge carriers. The thermal conductivity of doped samples was high compared to Cu2ZnSnSe4 and this may be due to the larger electronic contribution and the presence of the ZnSe phase in the doped samples. The maximum zT = 0.3 at 720 K occurs for Cu2.05ZnSn0.95Se4 for which a high-pressure torsion treatment resulted in an enhancement of zT by 30% at 625 K.

  9. Grape yield, and must compounds of 'Cabernet Sauvignon' grapevine in sandy soil with potassium contents increasing

    Directory of Open Access Journals (Sweden)

    Marlise Nara Ciotta

    2016-08-01

    Full Text Available ABSTRACT: Content of exchangeable potassium (K in t soil may influence on its content in grapevines leaves, grape yield, as well as, in must composition. The study aimed to assess the interference of exchangeable K content in the soil on its leaf content, production and must composition of 'Cabernet Sauvignon' cultivar. In September 2011, in Santana do Livramento (RS five vineyards with increasing levels of exchangeable K in the soil were selected. In the 2012/13 and 2013/14 harvests, the grape yield, yield components, total K content in the leaves in full bloom and berries veraison were evaluated. Values of total soluble sugar (TSS, pH, total titratable acidity (TTA, total polyphenols and anthocyanins were evaluated in the must. Exchangeable K content increase in soil with sandy surface texture increased its content in leaves collected during full flowering and in berries and must pH; however, it did not affect production of the 'Cabernet Sauvignon'.

  10. Optical, electrical and the related parameters of amorphous Ge-Bi-Se thin films

    International Nuclear Information System (INIS)

    El-Korashy, A.; El-Kabany, N.; El-Zahed, H.

    2005-01-01

    The related optical and electrical parameters of amorphous Ge-Bi-Se thin films were studied. The dependence of optical and electrical properties on the Bi content was observed in most compositions. At Bi >10at% the behavior show a switch from p to n type conduction mechanism. The correlation between the optical band gap E g and the average heats of atomization H s were observed. The results indicated that both the number of topological constant N con and the radial and angular N α , N β valence force constants exhibit the same trend with increasing Bi content. On the other hand, the mean bond energy increases with increasing Bi content to x=15at%. It may be concluded that is a function of the mean coordination number N co , the type of bonds, the degree of cross-linking and the band energy forming the network

  11. Damp Heat Treatment of Cu(In,GaSe2 Solar Cells with Different Sodium Content

    Directory of Open Access Journals (Sweden)

    Felix Daume

    2013-11-01

    Full Text Available Long term stability is crucial to maturing any photovoltaic technology. We have studied the influence of sodium, which plays a key role in optimizing the performance of Cu(In,GaSe2 (CIGSe solar cells, on the long-term stability of flexible CIGSe solar cells on polyimide foil. The standardized procedure of damp heat exposure (85% relative humidity at 85 °C was used to simulate aging of the unencapsulated cells in multiple time steps while they were characterized by current-voltage analysis, capacitance-voltage profiling, as well as electroluminescence imaging. By comparing the aging process to cells that were exposed to heat only, it could be confirmed that moisture plays the key role in the degradation process. We found that cells with higher sodium content suffer from a more pronounced degradation. Furthermore, the experimental results indicate the superposition of an enhancing and a deteriorating mechanism during the aging process. We propose an explanation based on the corrosion of the planar contacts of the solar cell.

  12. When increasing distraction helps learning: Distractor number and content interact in their effects on memory.

    Science.gov (United States)

    Nussenbaum, Kate; Amso, Dima; Markant, Julie

    2017-11-01

    Previous work has demonstrated that increasing the number of distractors in a search array can reduce interference from distractor content during target processing. However, it is unclear how this reduced interference influences learning of target information. Here, we investigated how varying the amount and content of distraction present in a learning environment affects visual search and subsequent memory for target items. In two experiments, we demonstrate that the number and content of competing distractors interact in their influence on target selection and memory. Specifically, while increasing the number of distractors present in a search array made target detection more effortful, it did not impair learning and memory for target content. Instead, when the distractors contained category information that conflicted with the target, increasing the number of distractors from one to three actually benefitted learning and memory. These data suggest that increasing numbers of distractors may reduce interference from conflicting conceptual information during encoding.

  13. Preparation and investigation of GaxGe25As15Se60-x (x = 1 ÷ 5) glasses

    Science.gov (United States)

    Shiryaev, V. S.; Karaksina, E. V.; Velmuzhov, A. P.; Sukhanov, M. V.; Kotereva, T. V.; Plekhovich, A. D.; Churbanov, M. F.; Filatov, A. I.

    2017-05-01

    Chalcogenide glasses of GaxGe25As15Se60-x (x = 0; 1; 2; 3; 4; 5) compositions are prepared; their transmission range, optical band gap energy, thermal properties and stability against crystallization are studied. It is shown that these glasses have a high transparency in the mid-IR region (from 0.8 to 15 μm), a high glass transition temperature (≥320 °C) and a low tendency to crystallize. The optical band gap energy of GaxGe25As15Se60-x (x = 0; 1; 2; 3; 4; 5) glasses decreases from 1.68 to 1.43 eV as the gallium content increases and the selenium decreases. Their glass network, according to IR spectroscopy data, consists of Ge(Se1/2)4 tetrahedrons and AsSe3/2 pyramids. The Ga2Ge25As15Se58 and Ga3Ge25As15Se57 glasses have highest stability against crystallization. The content of hydrogen and oxygen impurities in the purest glass samples, fabricated using a combination of chemical distillation purification method and vapor transport reaction technique, does not exceed 0.06 ppm (wt) and 0.5 ppm (wt), respectively.

  14. Survey of trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) in retail samples of flavoured and bottled waters.

    Science.gov (United States)

    Barroso, M F; Ramos, S; Oliva-Teles, M T; Delerue-Matos, C; Sales, M G F; Oliveira, M B P P

    2009-01-01

    Concentrations of eleven trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) were measured in 39 (natural and flavoured) water samples. Determinations were performed using graphite furnace electrothermetry for almost all elements (Al, As, Cd, Cr, Co, Mn, Ni, Pb, and Si). For Se determination hydride generation was used, and cold vapour generation for Hg. These techniques were coupled to atomic absorption spectrophotometry. The trace element content of still or sparkling natural waters changed from brand to brand. Significant differences between natural still and natural sparkling waters (p element was compared with the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. It was shown that flavoured waters generally increase the trace element content. The addition of preservatives and acidifying regulators had a significant influence on Mn, Co, As and Si contents (p < 0.05). Fruit juice can also be correlated to the increase of Co and As. Sweeteners did not provide any significant difference in Mn, Co, Se and Si content.

  15. Effects of soil type, moisture content, redox potential and methyl bromide fumigation on Kd values of radio-selenium in soil

    International Nuclear Information System (INIS)

    Ashworth, D.J.; Moore, J.; Shaw, G.

    2008-01-01

    Understanding the processes that determine the solid-liquid partitioning (K d value) of Se is of fundamental importance in assessing the risk associated with the disposal of radio-selenium-containing waste. Using a mini-column (rather than batch) approach, K d values for 75 Se were determined over time in relation to soil moisture content (field capacity or saturated), redox potential and methyl bromide fumigation (used to disrupt the soil microbial population) in three contrasting soil types: clay loam, organic and sandy loam. The K d values were generally in the range 50-500 L kg -1 , with mean soil K d increasing with increasing organic matter content. Saturation with water lowered the measured redox potentials in the soils. However, only in the sandy loam soil did redox potential become negative, and this led to an increase in 75 Se K d value in this soil. Comparison of the data with the Eh-pH stability diagram for Se suggested that such strong reduction may have been consistent with the formation of the insoluble Se species, selenide. These findings, coupled with the fact that methyl bromide fumigation had no discernible effect on 75 Se K d value in the sandy loam soil, suggest that geochemical, rather than microbial, processes controlled 75 Se partitioning. The inter-relations between soil moisture content, redox potential and Se speciation should be considered in the modelling and assessment of radioactive Se fate and transport in the environment

  16. Quantitative computed tomography for measuring bone mineral content

    International Nuclear Information System (INIS)

    Felsenberg, D.; Kalender, W.A.; Banzer, D.; Schmilinsky, G.; Heyse, M.; Fischer, E.; Schneider, U.; Siemens A.G., Erlangen; Krankenhaus Zehlendorf, Berlin

    1988-01-01

    Quantitative computed tomography (QCT) for measuring bone mineral content of lumbar vertebrae is increasingly used internationally. The effect of using conventional CT (single energy CT, SE-CT) and dual energy CT (DE-CT) on reproducibility has been examined. We defined a standard measurement protocol, which automatically evaluates a calibration phantom. This should ensure an in vivo reproducibility of 1 to 2%. Reference data, which has been obtained with this protocol from 113 normal subjects, using SE-CT ad DE-CT, are presented. (orig.) [de

  17. AgSbSe2 and AgSb(S,Se)2 thin films for photovoltaic applications

    International Nuclear Information System (INIS)

    Garza, J.G.; Shaji, S.; Rodriguez, A.C.; Das Roy, T.K.; Krishnan, B.

    2011-01-01

    Silver antimony selenide (AgSbSe 2 ) thin films were prepared by heating sequentially deposited multilayers of antimony sulphide (Sb 2 S 3 ), silver selenide (Ag 2 Se), selenium (Se) and silver (Ag). Sb 2 S 3 thin film was prepared from a chemical bath containing SbCl 3 and Na 2 S 2 O 3 , Ag 2 Se from a solution containing AgNO 3 and Na 2 SeSO 3 and Se thin films from an acidified solution of Na 2 SeSO 3 , at room temperature on glass substrates. Ag thin film was deposited by thermal evaporation. The annealing temperature was 350 deg. C in vacuum (10 -3 Torr) for 1 h. X-ray diffraction analysis showed that the thin films formed were polycrystalline AgSbSe 2 or AgSb(S,Se) 2 depending on selenium content in the precursor films. Morphology and elemental analysis of these films were done using scanning electron microscopy and energy dispersive X-ray spectroscopy. Optical band gap was evaluated from the UV-visible absorption spectra of these films. Electrical characterizations were done using Hall effect and photocurrent measurements. A photovoltaic structure: glass/ITO/CdS/AgSbSe 2 /Al was formed, in which CdS was deposited by chemical bath deposition. J-V characteristics of this structure showed V oc = 435 mV and J sc = 0.08 mA/cm 2 under illumination using a tungsten halogen lamp. Preparation of a photovoltaic structure using AgSbSe 2 as an absorber material by a non-toxic selenization process is achieved.

  18. Structural, optical and electrical properties of cadmium-doped lead chalcogenide (PbSe) thin films

    International Nuclear Information System (INIS)

    Khan, Shamshad A.; Khan, Zishan H.; El-Sebaii, A.A.; Al-Marzouki, F.M.; Al-Ghamdi, A.A.

    2010-01-01

    (PbSe) 100-x Cd x thin films of thickness 3000 A with variable concentrations of Cd (x=5, 10, 15 and 20) were prepared by thermal evaporation on glass substrates at room temperature at a base pressure of 10 -6 Torr. The structural, optical and electrical properties of these films were studied. X-ray diffraction patterns were used to determine the crystal structure of the films. Films were of polycrystalline texture over the whole range of study. Optical constants of all films were determined by absorbance and reflection measurements in a wavelength range 400-1200 nm. Analysis of the optical absorption data showed that the rule of direct transitions predominates. The values of the absorption coefficient (α), extinction coefficient (k) and imaginary part of the dielectric constant were found to increase with increasing Cd content in lead chalcogenides while the refractive index (n) and real part of dielectric constant were increased with increasing Cd concentration up to 15% and then they decreased with 20% of Cd content in PbSe. These results were interpreted in terms of the change in concentration of localized states due to the shift in Fermi level. The dc conductivities and activation energies of the films were measured in the temperature range 298-398 K. It was observed that the dc conductivity increases at all temperatures with the increase of Cd content in lead chalcogenide system. The experimental data suggests that the conduction is due to the thermally assisted tunneling of the carriers in the localized states near the band edges. The activation energy and optical band gap were found to decrease with increasing Cd concentration in lead chalcogenide.

  19. Dielectric relaxation and AC conductivity studies of Se90Cd10−xInx glassy alloys

    Directory of Open Access Journals (Sweden)

    Nitesh Shukla

    2016-06-01

    Full Text Available Chalcogenide glassy alloys of Se90Cd10−xInx (x = 2, 4, 6, 8 are synthesized by melt quench technique. The prepared glassy alloys have been characterized by techniques such as differential scanning calorimetry (DSC, scanning electron microscopy (SEM and energy dispersive X-ray (EDAX. Dielectric properties of Se90Cd10−xInx (x = 2, 4, 6, 8 chalcogenide glassy system have been studied using impedance spectroscopic technique in the frequency range 42 Hz to 5 MHz at room temperature. It is found that the dielectric constants ɛ′, dielectric loss factor ɛ″ and loss angle Tan δ depend on frequency. ɛ′, ɛ″ and loss angle Tan δ are found to be decreasing with the In content in Se90Cd10−xInx glassy system. AC conductivity of the prepared sample has also been studied. It is found that AC conductivity increases with frequency where as it has decreasing trend with increasing In content in Se–Cd matrix. The semicircles observed in the Cole–Cole plots indicate a single relaxation process.

  20. Electrodeposition and characterization of CdSe x-Te 1- x semiconducting thin films

    Science.gov (United States)

    Benamar, E.; Rami, M.; Fahoume, M.; Chraibi, F.; Ennaoui, A.

    1999-07-01

    Thin polycrystalline films of cadmium chalcogenides CdSe xTe 1-x ( 0 ≤ x ≤ 1) have been prepared by electrochemical plating on ITO (indium tin oxide) coated glass substrates from an acid sulfate solution at 90 °C. Structural, morphological and compositional studies of the deposited films are reported as a function of the x coefficient. XRD analysis shows that all deposits have a cubic structure with a preferred orientation along the (111) direction. The composition in the films is found to vary linearly with the composition in the solution. The increase in the selenium content x in the CdSe xTe 1-x films decreases the lattice constant and increases the band gap. Nevertheless this latter presents a minimum for x = 0.27.

  1. Molecular structure of virgin and Tg cycled (Ag2Se)x (AsSe)1-x bulk glasses

    Science.gov (United States)

    Wachtman, Jacob; Chen, Ping; Boochand, P.

    2009-03-01

    AsSe, the base glass (x = 0) in the titled ternary, is an interesting example of a chalcogenide that is partially de-mixed into As4Se4 molecules segregated from a connected AsSe network, with the latter determining glass network properties. Raman scattering reveals sharp modes of the Realgar molecules that are superimposed on broad modes coming from of the backbone. Upon Tg cycling virgin samples (as quenched melts), the concentration of de-mixed As4Se4 molecules decreases, suggesting that thermally induced polymerization occurs; molecules break up to form part of the connective tissue. Modulated DSC experiments reveal a broad exotherm near 140 ^oC in virgin samples, which becomes nearly extinct in Tg cycled samples. The exotherm may represent Realgar molecules nano-crystallizing as the temperature approaches Tg. Compositional trends in thermal parameters such as Tg(x), δCp(x), and the δHnr(x) as a function of Ag2Se content `x' of the glasses will be reported.

  2. INAA for the evaluation of selenium contents in grain foods consumed by Korean

    International Nuclear Information System (INIS)

    Moon, J.H.; Kim, S.H.; Kim, K.S.; Okhee Lee

    2016-01-01

    This study was aimed to measure the Se content in common consumed grain and potato foods. About 1 g of analytical sample of 40 items of foods was irradiated for 3 h by thermal neutrons (Φ th = 2.8 × 10 13 n/cm 2 s) and 75 Se nuclide was used for the determination of Se contents. The rice showed the range of Se contents from 0.55 to 3.64 μg per 100 g of sample. The Se contents in grain products varied according to the type of grain processing. The acquired Se value in this study will be useful to assess the Se intake of Korean. (author)

  3. Increasing the amylose content of maize through silencing of sbe2a ...

    African Journals Online (AJOL)

    Yomi

    2012-04-12

    Apr 12, 2012 ... 1College of Life Sciences, Jilin Agricultural University, Changchun 130118, China. ... activity via transgenic maize inbred line transformed by a high-efficient RNAi expression ... increase the amylose content of durum wheat.

  4. Thermoelectric prospects of chemically deposited PbSe and SnSe thin films

    Science.gov (United States)

    Nair, P. K.; Martínez, Ana Karen; Rosa García Angelmo, Ana; Barrios Salgado, Enue; Nair, M. T. S.

    2018-03-01

    Thin films of PbSe of 400-600 nm in thickness, were obtained via chemical deposition from a solution containing lead nitrate, thiourea and selenosufate. SnSe thin films of 90-180 nm in thickness, were also obtained by chemical deposition from a solution containing selenosulfate. Optical and electrical properties of these thin films were significantly altered by heating them in selenium vapor at 300 °C. Thin film PbSe has a bandgap (Eg) of 1.17 eV (direct gap, forbidden transitions), which decreases to 0.77 eV when it has been heated. Its electrical conductivity (σ) is p-type: 0.18 Ω-1 cm-1 (as-prepared), and 6.4 Ω-1 cm-1 when heated. Thin film SnSe is of orthorhombic crystalline structure which remains stable when heated at 300 °C, but its Eg increases from 1.12 eV (indirect) in as-prepared film to 1.5 eV (direct, forbidden transitions) upon heating. Its electrical conductivity is p-type, which increases from 0.3 Ω-1 cm-1 (as-prepared) to 1 Ω-1 cm-1 when heated (without Se-vapor). When SnSe film is heated at 300 °C in the presence of Se-vapor, they transform to SnSe2, with Eg of 1.5 eV (direct, forbidden) with n-type electrical conductivity, 11 Ω-1 cm-1. The Seebeck coefficient for the PbSe films is: +0.55 mV K-1 (as prepared) and +0.275 mV K-1 (heated); for SnSe films it is: +0.3 mV K-1 (as prepared) and +0.20 mV K-1 (heated); and for SnSe2 film, - 0.35 mV K-1. A five-element PbSe-SnSe2-PbSe-SnSe2-PbSe thermoelectric device demonstrated 50 mV for a temperature difference ΔT = 20 °C (2.5 mV K-1). For SnSe-SnSe2-SnSe-SnSe2-SnSe device, the value is 15 mV for ΔT = 20 °C (0.75 mV K-1). Prospect of these thin films in thermoelectric devices of hybrid materials, in which the coatings may be applied on distinct substrate and geometries is attractive.

  5. Analysis of Selenium Contents in Plant Foods Consumed by Korean adults

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Okhee; Kim, Kangsung [Kyonghee Univ., Yongin (Korea, Republic of); Moon, Jonghwa; Chung, Yongsam [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    Se exhibited a relatively small range of adequate ingestion level for health. An accurate investigation of Se consumption in Korean population has been rare because the database of food containing selenium is rather small. The table of Se content in food is a basic tool for calculating selenium intake. Since diet is the main source of Se intake, the Se content in various foods and personal dietary practices would be primarily determined to evaluate the nutritional status of Se for a population. To evaluate the Se intake levels of a population, a Se food database should be generated based on data produced by high-precision analytical techniques. In addition, this database should contain the Se contents of foods that are regularly consumed by the studied population. Plant foods contain lower Se levels when compared to animal products. However, grains, potatoes, starches, and legumes have been the main sources of carbohydrates and proteins in traditional Korean diet. Since grains such as rice are a staple food and remain the most consumed foods in Korea, their contribution to dietary Se intake might be considerable. However, no reports on the selenium content from plant foods have been compiled for the Korean population. The goal of this study was to measure the Se content in common consumed plant foods such as grain, potatoes, legumes and their products. The legume rich in protein contained relatively high amount of Se when compared to other plant food type. The raw wheat and wheat product which have been imported from abroad showed higher amount of Se than rice mostly produced in Korea. The acquired Se value is useful to assess the Se intake of Korean adults from plant foods.

  6. Analysis of Selenium Contents in Plant Foods Consumed by Korean adults

    International Nuclear Information System (INIS)

    Lee, Okhee; Kim, Kangsung; Moon, Jonghwa; Chung, Yongsam

    2014-01-01

    Se exhibited a relatively small range of adequate ingestion level for health. An accurate investigation of Se consumption in Korean population has been rare because the database of food containing selenium is rather small. The table of Se content in food is a basic tool for calculating selenium intake. Since diet is the main source of Se intake, the Se content in various foods and personal dietary practices would be primarily determined to evaluate the nutritional status of Se for a population. To evaluate the Se intake levels of a population, a Se food database should be generated based on data produced by high-precision analytical techniques. In addition, this database should contain the Se contents of foods that are regularly consumed by the studied population. Plant foods contain lower Se levels when compared to animal products. However, grains, potatoes, starches, and legumes have been the main sources of carbohydrates and proteins in traditional Korean diet. Since grains such as rice are a staple food and remain the most consumed foods in Korea, their contribution to dietary Se intake might be considerable. However, no reports on the selenium content from plant foods have been compiled for the Korean population. The goal of this study was to measure the Se content in common consumed plant foods such as grain, potatoes, legumes and their products. The legume rich in protein contained relatively high amount of Se when compared to other plant food type. The raw wheat and wheat product which have been imported from abroad showed higher amount of Se than rice mostly produced in Korea. The acquired Se value is useful to assess the Se intake of Korean adults from plant foods

  7. Contrasting Food Web Factor and Body Size Relationships with Hg and Se Concentrations in Marine Biota

    Science.gov (United States)

    Karimi, Roxanne; Frisk, Michael; Fisher, Nicholas S.

    2013-01-01

    Marine fish and shellfish are primary sources of human exposure to mercury, a potentially toxic metal, and selenium, an essential element that may protect against mercury bioaccumulation and toxicity. Yet we lack a thorough understanding of Hg and Se patterns in common marine taxa, particularly those that are commercially important, and how food web and body size factors differ in their influence on Hg and Se patterns. We compared Hg and Se content among marine fish and invertebrate taxa collected from Long Island, NY, and examined associations between Hg, Se, body length, trophic level (measured by δ15N) and degree of pelagic feeding (measured by δ13C). Finfish, particularly shark, had high Hg content whereas bivalves generally had high Se content. Both taxonomic differences and variability were larger for Hg than Se, and Hg content explained most of the variation in Hg:Se molar ratios among taxa. Finally, Hg was more strongly associated with length and trophic level across taxa than Se, consistent with a greater degree of Hg bioaccumulation in the body over time, and biomagnification through the food web, respectively. Overall, our findings indicate distinct taxonomic and ecological Hg and Se patterns in commercially important marine biota, and these patterns have nutritional and toxicological implications for seafood-consuming wildlife and humans. PMID:24019976

  8. Contrasting food web factor and body size relationships with Hg and Se concentrations in marine biota.

    Directory of Open Access Journals (Sweden)

    Roxanne Karimi

    Full Text Available Marine fish and shellfish are primary sources of human exposure to mercury, a potentially toxic metal, and selenium, an essential element that may protect against mercury bioaccumulation and toxicity. Yet we lack a thorough understanding of Hg and Se patterns in common marine taxa, particularly those that are commercially important, and how food web and body size factors differ in their influence on Hg and Se patterns. We compared Hg and Se content among marine fish and invertebrate taxa collected from Long Island, NY, and examined associations between Hg, Se, body length, trophic level (measured by δ(15N and degree of pelagic feeding (measured by δ(13C. Finfish, particularly shark, had high Hg content whereas bivalves generally had high Se content. Both taxonomic differences and variability were larger for Hg than Se, and Hg content explained most of the variation in Hg:Se molar ratios among taxa. Finally, Hg was more strongly associated with length and trophic level across taxa than Se, consistent with a greater degree of Hg bioaccumulation in the body over time, and biomagnification through the food web, respectively. Overall, our findings indicate distinct taxonomic and ecological Hg and Se patterns in commercially important marine biota, and these patterns have nutritional and toxicological implications for seafood-consuming wildlife and humans.

  9. Análisis de las dependencias composicionales de las propiedades opticas de láminas semiconductoras amorfas del sistema As-S-Se

    Directory of Open Access Journals (Sweden)

    González-Leal, J. M.

    2004-04-01

    Full Text Available Amorphous As40S60-xSex (x = 0, 20, 30, 40 and 60 at. % films have been prepared by vacuum thermal evaporation. Values for the refractive index and the absorption coefficient of these films have been determined from their transmission spectra, measured at normal incidence, in the spectral range from 400 to 2200 nm. It has been found that the refractive index of the samples increases with increasing Se content, over the entire spectral range. This behaviour can be explained, according to the Lorentz-Lorenz relationship, by the increased polarizability of the larger Se atoms, in comparison with S atoms. The values of the As effective coordination number, Nc, have been estimated from the analysis of the dispersion of the refractive index, in terms of a model based on the single-oscillator formula. The increase in Nc with increasing Se content, from around 3.0 to 3.4, which has been inferred from this analysis, suggests an increase in the structural compactness of the films when substituting S by Se. This conclusion is supported by the decrease observed in the intensity of the first sharp diffraction peak, in the X-ray patterns. Finally, it has been found a decrease in the optical bandgap with increasing Se content, from 2.38 to 1.79 eV, which can be plausibly explained considering the lower bonding energy of As-Se bonds compared with that of As-S bonds.

    Se han preparado láminas semiconductoras amorfas de composiciones químicas As40S60-xSex (con x = 0, 20, 30, 40 y 60 % at., mediante la técnica de evaporación térmica en vacío. Los valores del índice de refracción y del coeficiente de absorción de estas láminas, se determinaron a partir de los espectros de transmisión óptica, obtenidos en incidencia normal, en el intervalo espectral comprendido entre 400 y 2200 nm. Se ha encontrado un aumento en los valores del índice de refracción con el contenido de Se, dentro del intervalo espectral en estudio. El análisis de la dependencia

  10. A crystallization study of amorphous Tex(Bi2Se3)1-x alloys with variation of the Se content

    International Nuclear Information System (INIS)

    Saxena, Manish

    2005-01-01

    Alloys of the Te x (Bi 2 Se 3 ) 1-x glass system, obtained using rapid quenching technique, have been characterized by calorimetric measurements and differential thermal analysis for different heating rates in this work. A systematic investigation of crystallization kinetics is carried out for the composition range in which amorphous alloys exhibit a large glass-forming ability in Se-based systems, thermal stability including in the temperature range between the glass transition temperature, T g , and crystallization temperature, T c , and the effect of ΔT c (=T c - T g ) at different heating rates for the formation of an amorphous single phase is evaluated from thermal analytical data. The thermal stability of these glasses is found to provide good control for forming these glasses with ease. This analysis helps to find the suitability of an alloy for use in phase transition optical memories/switches

  11. Thermoelectric properties of n-type Bi{sub 2}(Te{sub 1{minus}x}Se{sub x}){sub 3} fabricated by mechanical alloying and hot pressing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H J; Choi, J S; Oh, T S; Hyun, D B

    1997-07-01

    Thermoelectric properties of polycrystalline Bi{sub 2}(Te{sub 1{minus}x}Se{sub x}){sub 3} (0.05 {le} x {le} 0.25), fabricated by mechanical alloying and hot pressing, have been investigated. Formation of n-type Bi{sub 2}(Te{sub 0.9}Se{sub 0.1}){sub 3} alloy powders was completed by mechanical alloying for 3 hours at ball-to-material ratio of 5:1, and processing time for Bi{sub 2}(Te{sub 1{minus}x}Se{sub x}){sub 3} formation increased with Bi{sub 2}Se{sub 3} content x. Figure-of-merit of Bi{sub 2}(Te{sub 0.9}Se{sub 0.1}) was markedly increased by hot pressing at temperatures above 450 C, and maximum value of 1.9 x 10{sup {minus}3}/K was obtained by hot pressing at 550 C. With addition of 0.015 wt% Bi as acceptor dopant, figure-of-merit of Bi{sub 2}(Te{sub 0.9}Se{sub 0.1}){sub 3} was hot pressed at 550 C, could be improved to 2.1 x 10{sup {minus}3}/K. When Bi{sub 2}(Te{sub 1{minus}x}Se{sub x}){sub 3} was hot pressed at 550 C, figure-of-merit increased from 1.14 x 10{sup {minus}3}/K to 1.92 x 10{sup {minus}3}/K with increasing Bi{sub 2}Se{sub 3} content x from 0.05 to 0.15, and then decreased to 1.30 x 10{sup {minus}3}/K for x = 0.25 composition.

  12. Enabling DRM-preserving Digital content Redistribution

    NARCIS (Netherlands)

    Krishnan Nair, S.; Popescu, B.C.; Gamage, C.D.; Crispo, B.; Tanenbaum, A.S.

    2005-01-01

    Traditionally, the process of online digital content distribution has involved a limited number of centralised distributors selling protected contents and licenses authorising the use of the se contents, to consumers. In this paper, we extend this model by introducing a security scheme that enables

  13. The Increased Content of Micronutrients in Celery, Carrot, Parsnip and Parsley Plants after Treatment with Sodium Naphthenate

    Directory of Open Access Journals (Sweden)

    Grbović Ljubica

    2016-08-01

    Full Text Available Young plants of celery, parsley, parsnip and carrot, grown in nutrient solution, were treated with sodium naphthenate (10−7 mol dm−3, applying foliar and root treatments. Both treatments affected the root content of all investigated elements present in the nutrient solution, but in a different way, depending on the plant species. An average change (increase/decrease in the contents of investigated essential elements was about 35%. Our experiments with naphthenate showed that this treatment may enhance the efficiency of essential elements uptake and increase its content in plants without changing concentration of these elements in the nutrient solution. Especially interesting results were obtained in the case of carrot, as increased contents were observed in the elements that are usually deficient in nutrition (Fe, Zn, Mn, whereas the other remained unchanged.

  14. Hot injection synthesis of Cu(In, Ga)Se2 nanocrystals with tunable bandgap

    Science.gov (United States)

    Latha, M.; Aruna Devi, R.; Velumani, S.

    2018-05-01

    CuIn1-xGaxSe2 nanocrystals (CIGSe NCs) were synthesized with different gallium (Ga) content by the hot injection process at low reaction temperature for the first time. The Ga content [x = Ga(In + Ga)] was varied such as 0, 0.25, 0.50 and 0.75 to study their influences on the structural, morphological, compositional and optical properties of CIGSe NCs. X-ray diffraction (XRD) analysis showed the peak shift towards higher 2θ angle. The lattice parameters a and c were decreased linearly as x value increases which propitiated Vegard's law. Transmission electron microscopy (TEM) analysis revealed a decrease in the particle size from 55 to 22 nm. Ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectra indicated a blue shift towards the lower wavelength and bandgap was tuned from 1.04 to 1.41eV. Apart from this, CIGSe thin films were prepared by doctor blade coating method followed by annealing under Se/Ar atmosphere. The mobility of CIGSe thin film increased whereas resistivity decreased. Moreover, the photoconductivity of CIGSe annealed thin film exhibited almost 2-fold increase under an illumination of light. We realize from these results that the synthesized CIGSe NCs with x = 0.25 is expected to have the important perspective to be efficiently exploited as an absorber layer in cost-effective thin film solar cells.

  15. Optical studies on Zn-doped lead chalcogenide (PbSe){sub 100−x}Zn{sub x} thin films composed of nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ashraf, Md. Tanweer [Department of Applied Sciences and Humanities, Jamia Millia Islamia (JMI), New Delhi-25 (India); Salah, Numan A. [Center of Nanotechnology, King Abdulaziz University, Jeddah (Saudi Arabia); Rafat, M. [Department of Applied Sciences and Humanities, Jamia Millia Islamia (JMI), New Delhi-25 (India); Zulfequar, M. [Department of Physics, Jamia Millia Islamia, New Delhi-25 (India); Khan, Zishan H., E-mail: zishan_hk@yahoo.co.in [Department of Applied Sciences and Humanities, Jamia Millia Islamia (JMI), New Delhi-25 (India)

    2016-08-01

    The effect of laser-Irradiation on the optical properties of Zn-doped PbSe thin films composed of nanoparticles has been studied. Scanning electron microscope (SEM) investigations suggest the formation of nanoparticles of average size of 50 nm for all the studied Zn compositions. XRD studies show that the as-prepared thin films are polycrystalline in nature. The formation of nanoparticles of Zn-doped PbSe has been confirmed by indexing the crystal planes as observed in the XRD spectra. The addition of Zn in (PbSe){sub 100−x}Zn{sub x} thin films result in the blue shift in photoluminescence spectra, this blue shift is associated with the narrowing of the band gap. Optical absorption measurements reveal a direct band gap for the present samples, which decreases on increasing the Zn content. The same trend has also been observed for the samples irradiated with laser. Further, the calculated values of Urbach energy are found to increase with the increase in Zn contents for the as-prepared as well as laser-irradiated samples. All the above observations agree well with the results of optical band gap and suggest that the decrease in band gap may be due to increase in band tails, defects and particle size. - Highlights: • Nanoparticles of Zn doped (PbSe){sub 100−x}Zn{sub x} lead chalcogenides have been synthesized. • Effect of laser irradiation on optical properties of (PbSe){sub 100−x}Zn{sub x} has been studied. • A blue shift in PL spectra is obtained on Zn incorporation.

  16. Student Content Knowledge Increases after Participation in a Hands-on Biotechnology Intervention

    Science.gov (United States)

    Bigler, Amber M.; Hanegan, Nikki L.

    2011-01-01

    Implementing biotechnology education through hands-on teaching methods should be considered by secondary biology teachers. This study is an experimental research design to examine increased student content knowledge in biotechnology after a hands-on biotechnology intervention. The teachers from both school groups participated in, Project Crawfish,…

  17. Minerals and Total Polyphenolic Content of Some Vegetal Powders

    Directory of Open Access Journals (Sweden)

    Roxana E. TUFEANU

    2017-11-01

    Full Text Available The total polyphenolic content and minerals were determined for chia seeds, Psyllium husks and watermelon rind powder. The minerals content was performed by using the Inductively Coupled Plasma Optical Emissions Spectrometer and Atomic Absorption Spectrometer, technique FIAS-Furnace (for Se. The sample with the highest content of polyphenols was chia (2.69 mg GAE/g s. followed by the watermelon rind powder. Reduced amounts of polyphenols were found in the Psyllium husks. Also, the total polyphenol concentration increased with the increase of the extraction time on the ultrasonic water bath. Minerals analysis indicated that powders obtained from chia seeds and watermelon rind contained large amounts of potassium, calcium, phosphorus and magnesium. The most abundant mineral in the Psyllium husks powder was found potassium, followed by calcium. In conclusion, these powders can be used as ingredients for functional food and food supplements production due to the high nutritional content and bioactive properties.

  18. Photo- and Thermo-Induced Changes in Optical Constants and Structure of Thin Films from GeSe2-GeTe-ZnTe System

    Science.gov (United States)

    Petkov, Kiril; Todorov, Rossen; Vassilev, Venceslav; Aljihmani, Lilia

    We examined the condition of preparation of thin films from GeSe2-GeTe-ZnTe system by thermal evaporation and changes in their optical properties after exposure to light and thermal annealing. The results for composition analysis of thin films showed absence of Zn independently of the composition of the bulk glass. By X-ray diffraction (XRD) analysis it was found that a reduction of ZnTe in ZnSe in bulk materials takes of place during the film deposition. A residual from ZnSe was observed in the boat after thin film deposition. Optical constants (refractive index, n and absorption coefficient, α) and thickness, d as well as the optical band gap, Eg, depending of the content of Te in ternary Ge-Se-Te system are determined from specrophotometric measurements in the spectral range 400-2500 nm applying the Swanepoel's envelope method and Tauc's procedure. With the increase of Te content in the layers the absorption edge is shifted to the longer wavelengths, refractive index increases while the optical band gap decreases from 2.02 eV for GeSe2 to 1.26 eV for Ge34Se42Te24. The values of the refractive index decrease after annealing of all composition and Eg increase, respectively. Thin films with composition of Ge27Se47Te9Zn17 and Ge28Se49Te10Zn13 were prepared by co-evaporation of (GeSe2)78(GeTe)22 and Zn from a boat and a crucible and their optical properties, surface morphology and structure were investigated. The existence of a correlation between the optical band gap and the copostion of thin films from the system studied was demonstrated.

  19. Exercise Training-Induced Adaptations Associated with Increases in Skeletal Muscle Glycogen Content

    Science.gov (United States)

    Manabe, Yasuko; Gollisch, Katja S.C.; Holton, Laura; Kim, Young–Bum; Brandauer, Josef; Fujii, Nobuharu L.; Hirshman, Michael F.; Goodyear, Laurie J.

    2012-01-01

    Chronic exercise training results in numerous skeletal muscle adaptations, including increases in insulin sensitivity and glycogen content. To understand the mechanism for increased muscle glycogen, we studied the effects of exercise training on glycogen regulatory proteins in rat skeletal muscle. Female Sprague Dawley rats performed voluntary wheel running for 1, 4, or 7 weeks. After 7 weeks of training, insulin-stimulated glucose uptake was increased in epitrochlearis muscle. Compared to sedentary control rats, muscle glycogen did not change after 1 week of training, but increased significantly after 4 and 7 weeks. The increases in muscle glycogen were accompanied by elevated glycogen synthase activity and protein expression. To assess the regulation of glycogen synthase, we examined its major activator, protein phosphatase 1 (PP1), and its major deactivator, glycogen synthase kinase 3 (GSK3). Consistent with glycogen synthase activity, PP1 activity was unchanged after 1 week of training but significantly increased after 4 and 7 weeks of training. Protein expression of RGL(GM), another regulatory PP1 subunit, significantly decreased after 4 and 7 weeks of training. Unlike PP1, GSK3 phosphorylation did not follow the pattern of glycogen synthase activity. The ~40% decrease in GSK-3α phosphorylation after 1 week of exercise training persisted until 7 weeks and may function as a negative feedback to elevated glycogen. Our findings suggest that exercise training-induced increases in muscle glycogen content could be regulated by multiple mechanisms including enhanced insulin sensitivity, glycogen synthase expression, allosteric activation of glycogen synthase and PP1activity. PMID:23206309

  20. Ebselen increases cytosolic free Ca2+ concentration, stimulates glutamate release and increases GFAP content in rat hippocampal astrocytes

    International Nuclear Information System (INIS)

    Salazar, Miguel; Pariente, Jose Antonio; Salido, Gines Maria; Gonzalez, Antonio

    2008-01-01

    We have investigated the effect of the seleno-organic compound and radical scavenger ebselen on rat hippocampal astrocytes in culture. Throughout our study we carried out determinations of [Ca 2+ ] c in fura-2-loaded cells by single cell imaging, glutamate secretion employing an enzymatic-based assay and GFAP expression, which was monitorized by immunocytochemistry and confocal microscopy. Our results show that ebselen (1-20 μM) dose dependently increases [Ca 2+ ] c , stimulates glutamate release and increases GFAP content, a hallmark of astrocyte reactivity. Ebselen did not alter significantly cell viability as assayed by determination of LDH release into the extracellular medium. Ebselen-evoked glutamate release and increase in GFAP content were Ca 2+ -dependent, because incubation of astrocytes in the absence of extracellular Ca 2+ (medium containing 0.5 mM EGTA) and in the presence of the intracellular Ca 2+ chelator BAPTA (10 μM) significantly reduced ebselen-evoked changes in these parameters. The effects of ebselen we have observed may underline various signalling pathways which are important for cell proliferation, differentiation and function. However, aberrations in astroglial physiology could significantly compromise brain function, due to their role as modulators of neuron activity. Therefore, we consider that careful attention should be paid when employing ebselen as a prophylactic agent against brain damage

  1. Study of structural and optical properties of Cd{sub 1-x}Zn{sub x}Se thin films

    Energy Technology Data Exchange (ETDEWEB)

    Wahab, L.A., E-mail: aly_lo2003@yahoo.com [National Center for Radiation Research and Technology, Nasr City, Cairo (Egypt); Zayed, H.A. [University Collage of Women for Art, Science and Education, Ain Shams University, Cairo (Egypt); El-Galil, A.A. Abd [National Center for Radiation Research and Technology, Nasr City, Cairo (Egypt)

    2012-06-01

    Cd{sub 1-x}Zn{sub x}Se (x = 0, 0.5 and 1) thin films have been deposited onto glass substrates using thermal evaporation technique. The lattice constants, grain size, microstrain and dislocation density were studied by using X-ray diffraction. In addition the optical constants were calculated in the wavelength range 400-2500 nm. Transmittance and reflectance were used to calculate the absorption coefficient {alpha} and the optical band gap E{sub g}. The linear relation of ({alpha}h{upsilon}){sup 2} as a function of photon energy h{upsilon} for the thin films illustrated that the films exhibit a direct band gap, which increases with increasing Zn content. This increasing of optical band gap was interpreted in accordance to the increasing in the cohesive energy. Optical constants, such as refractive index n, optical conductivity {sigma}{sub opt}, complex dielectric constant, relaxation time {tau} and dissipation factor tan{delta} were determined. The optical dispersion parameters E{sub 0}, E{sub d} were determined according to Wemple and Di Domenico method. - Highlights: Black-Right-Pointing-Pointer ZnSe thin film has cubic zinc blende structure while CdSe and Cd{sub 0.5}Zn{sub 0.5}Se thin films have hexagonal structure. Black-Right-Pointing-Pointer Grain size of Cd{sub 1-x}Zn{sub x}Se decreases with increasing x (x = 0, 0.5 and 1). Black-Right-Pointing-Pointer Optical band gap increases with increasing x.

  2. Effect of Silver Doping on Transport Properties of Bi2Se3: AgxBi2Se3 and Bi2-xAgxSe3

    Science.gov (United States)

    Zhang, Min; Wei, Zhan-Tao

    2018-03-01

    Ag-doped Bi2Se3 with the formula AgxBi2Se3 and Bi2-xAgxSe3 were prepared and their electrical and magnetic transport properties have been investigated to study the influence of silver doping on transport properties of Bi2Se3 with different Ag-doped method. All samples exhibited metallic resistivity and the resistivity increased with increasing Ag concentration. The lattice parameter c of Ag-substituted and Ag-intercalated samples displays a contrary change as the Ag concentration increased. For the Ag-intercalated samples, both the resistance upturn were observed in the curves of temperature dependent of resistivity and temperature dependent of magnetoresistance, respectively, indicating that the enhanced surface effect was obtained in those samples. Monotonously, field-induced MR peaks around 200 K were also observed in those samples. Similar behaviors were not observed in the Ag-substituted samples.

  3. Effect of Silver Doping on Transport Properties of Bi2Se3: AgxBi2Se3 and Bi2-xAgxSe3

    Science.gov (United States)

    Zhang, Min; Wei, Zhan-Tao

    2018-05-01

    Ag-doped Bi2Se3 with the formula AgxBi2Se3 and Bi2-xAgxSe3 were prepared and their electrical and magnetic transport properties have been investigated to study the influence of silver doping on transport properties of Bi2Se3 with different Ag-doped method. All samples exhibited metallic resistivity and the resistivity increased with increasing Ag concentration. The lattice parameter c of Ag-substituted and Ag-intercalated samples displays a contrary change as the Ag concentration increased. For the Ag-intercalated samples, both the resistance upturn were observed in the curves of temperature dependent of resistivity and temperature dependent of magnetoresistance, respectively, indicating that the enhanced surface effect was obtained in those samples. Monotonously, field-induced MR peaks around 200 K were also observed in those samples. Similar behaviors were not observed in the Ag-substituted samples.

  4. Impact of selenium supply on Se-methylselenocysteine and glucosinolate accumulation in selenium-biofortified Brassica sprouts.

    Science.gov (United States)

    Avila, Fabricio William; Yang, Yong; Faquin, Valdemar; Ramos, Silvio Junio; Guilherme, Luiz Roberto G; Thannhauser, Theodore W; Li, Li

    2014-12-15

    Brassica sprouts are widely marketed as functional foods. Here we examined the effects of Se treatment on the accumulation of anticancer compound Se-methylselenocysteine (SeMSCys) and glucosinolates in Brassica sprouts. Cultivars from the six most extensively consumed Brassica vegetables (broccoli, cauliflower, green cabbage, Chinese cabbage, kale, and Brussels sprouts) were used. We found that Se-biofortified Brassica sprouts all were able to synthesize significant amounts of SeMSCys. Analysis of glucosinolate profiles revealed that each Brassica crop accumulated different types and amounts of glucosinolates. Cauliflower sprouts had high total glucosinolate content. Broccoli sprouts contained high levels of glucoraphanin, a precursor for potent anticancer compound. Although studies have reported an inverse relationship between accumulation of Se and glucosinolates in mature Brassica plants, Se supply generally did not affect glucosinolate accumulation in Brassica sprouts. Thus, Brassica vegetable sprouts can be biofortified with Se for the accumulation of SeMSCys without negative effects on chemopreventive glucosinolate contents. Published by Elsevier Ltd.

  5. Studies on dielectric properties, opto-electrical parameters and electronic polarizability of thermally evaporated amorphous Cd{sub 50}S{sub 50−x}Se{sub x} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Hassanien, Ahmed Saeed, E-mail: a.s.hassanien@gmail.com [Engineering Mathematics and Physics Department, Faculty of Engineering (Shoubra), Benha University (Egypt); Physics Department, Faculty of Science and Humanities in Ad-Dawadmi, Shaqra University, 11911 (Saudi Arabia)

    2016-06-25

    The objective of this work is to study the influence of the addition of more Se on dielectric properties, opto-electrical parameters and electronic polarizability of amorphous chalcogenide Cd{sub 50}S{sub 50−x}Se{sub x} thin films (30 ≤ x ≤ 50 at%). Thin films of thickness 200 nm were synthesized by vacuum deposition at ≈8.2 × 10{sup −4} Pa. Both refractive index and extinction coefficient were used to obtain all the studied parameters. The high frequency dielectric constant, real and imaginary parts of dielectric constant were discussed. Drude theory was applied to investigate opto-electrical parameters, like optical carrier concentration, optical mobility and optical resistivity. Moreover, other parameters were investigated and studied, e.g. Drude parameters, volume and surface energy loss functions, dielectric loss factor, dielectric relaxation time, complex optical conductivity and electronic polarizability as well as optical electronegativity and third-order nonlinear optical susceptibility. Values of electronic polarizability and nonlinear optical susceptibility were found to be decreased while optical electronegativity increased as Se-content was increased. Increment of Se-content in amorphous Cd{sub 50}S{sub 50−x}Se{sub x} thin films has also led to minimize the energy losses when electromagnetic waves propagate through films as well as optical conductivity and the speed of light increased. The other studied properties and parameters of Cd{sub 50}S{sub 50−x}Se{sub x} films were found to be strongly dependent upon Se-content. - Highlights: • Thermally evaporated amorphous Cd{sub 50}S{sub 50−x}Se{sub x} (30 ≤ x ≤ 50) thin films were deposited. • Refractive index and absorption index were used to determine almost all properties. • Dielectric properties, Drude parameters and electronic polarizability were studied. • Addition of more Se to CdSSe matrix led to improve the opto-electrical properties. • New data were obtained and

  6. Selenium contents of Japanese foodstuffs by neutron activation analysis

    International Nuclear Information System (INIS)

    Noda, Katsuhiko; Hirai, Shoji; Danbara, Hiroshi.

    1980-01-01

    Selenium (Se) contents of Japanese foodstuffs were measured by neutron activation analyses with the TRIGA-II reactor in Atomic Energy Research Laboratory, Musashi Institute of Technology. Freezedried samples (200 - 500 mg) were irradiated in the pneumatic tube (thermal neutron flux, 1 x 10 12 n.cm -2 . sec -1 ) for 10 sec, and sup(77m)Se produced was counted for 30 sec in a gamma -ray spectrometer system equipped with a Ge(Li) detector. Samples containing less than 0.05 ppm Se and the processed foods of high salt contents were analyzed with radioactivities of 75 Se after irradiation in the central symble (thermal neutron flux, 4 x 10 12 n.cm -2 .sec -1 ) for 5 hours, digestion in the HNO 3 -HClO 4 mixture, and then purification by a precipitation process. Foodstuffs of animal origins contained more Se than those of plant origins. Se contents were as follows in the descending order: fish, meats, cereals, vegetables, and fruit. Daily per capital intaked of Se was in the range of 100 - 200 mu g, as calculated for and as found by analysis of composite diets representing ordinary Japanese meals. (author)

  7. Effect of increasing total solids contents on anaerobic digestion of food waste under mesophilic conditions: performance and microbial characteristics analysis.

    Directory of Open Access Journals (Sweden)

    Jing Yi

    Full Text Available The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste with different total solids contents from 5% to 20% were compared and the microbial communities in reactors were investigated using 454 pyrosequencing technology. Three stable anaerobic digestion processes were achieved for food waste biodegradation and methane generation. Better performances mainly including volatile solids reduction and methane yield were obtained in the reactors with higher total solids content. Pyrosequencing results revealed significant shifts in bacterial community with increasing total solids contents. The proportion of phylum Chloroflexi decreased obviously with increasing total solids contents while other functional bacteria showed increasing trend. Methanosarcina absolutely dominated in archaeal communities in three reactors and the relative abundance of this group showed increasing trend with increasing total solids contents. These results revealed the effects of the total solids content on the performance parameters and the behavior of the microbial communities involved in the anaerobic digestion of food waste from wet to dry technologies.

  8. Effect of Increasing Total Solids Contents on Anaerobic Digestion of Food Waste under Mesophilic Conditions: Performance and Microbial Characteristics Analysis

    Science.gov (United States)

    Jin, Jingwei; Dai, Xiaohu

    2014-01-01

    The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste with different total solids contents from 5% to 20% were compared and the microbial communities in reactors were investigated using 454 pyrosequencing technology. Three stable anaerobic digestion processes were achieved for food waste biodegradation and methane generation. Better performances mainly including volatile solids reduction and methane yield were obtained in the reactors with higher total solids content. Pyrosequencing results revealed significant shifts in bacterial community with increasing total solids contents. The proportion of phylum Chloroflexi decreased obviously with increasing total solids contents while other functional bacteria showed increasing trend. Methanosarcina absolutely dominated in archaeal communities in three reactors and the relative abundance of this group showed increasing trend with increasing total solids contents. These results revealed the effects of the total solids content on the performance parameters and the behavior of the microbial communities involved in the anaerobic digestion of food waste from wet to dry technologies. PMID:25051352

  9. Effect of increasing total solids contents on anaerobic digestion of food waste under mesophilic conditions: performance and microbial characteristics analysis.

    Science.gov (United States)

    Yi, Jing; Dong, Bin; Jin, Jingwei; Dai, Xiaohu

    2014-01-01

    The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste with different total solids contents from 5% to 20% were compared and the microbial communities in reactors were investigated using 454 pyrosequencing technology. Three stable anaerobic digestion processes were achieved for food waste biodegradation and methane generation. Better performances mainly including volatile solids reduction and methane yield were obtained in the reactors with higher total solids content. Pyrosequencing results revealed significant shifts in bacterial community with increasing total solids contents. The proportion of phylum Chloroflexi decreased obviously with increasing total solids contents while other functional bacteria showed increasing trend. Methanosarcina absolutely dominated in archaeal communities in three reactors and the relative abundance of this group showed increasing trend with increasing total solids contents. These results revealed the effects of the total solids content on the performance parameters and the behavior of the microbial communities involved in the anaerobic digestion of food waste from wet to dry technologies.

  10. Pigments content in Сhlorella vulgaris under the influence of the sodium selenite and the ions of metals

    Directory of Open Access Journals (Sweden)

    O. I. Bodnar

    2016-01-01

    Full Text Available We investigated the content of pigments in Chlorella vulgaris Beij. (Chlorophyta under the influence of sodium selenite in concentrations based on Se4+ 0.5, 5.0, 10.0 and 20.0 mg/dm3 during one, three and seven days and under the influence of the simultaneous action of selenite in concentrations 10 mg Se4+/dm3 and ions of Zn2+, Mn2+, Co2+,Cu2+, Fe3+ in concentrations 5.00, 0.25, 0.05, 0.008 and 0.002 mg/dm3over seven days. This research was carried out to establish the conditions for obtaining algal lipidis substance enriched with selenium and biogenic metals in the aquaculture. The content of pigments was determined spectrophotometrically, the cellular walls were separatedby centrifuge in the percoll gradient and investigated microscopically. The pigments content in the Ch. vulgaris increased by 1.5–2.5 times in comparison with the control sample under the influence of 10 mg Se4+/dm3 with and without metal ions, in all variants of experimental influence due to binding of SeО32– with proteins and lipids. We found that selenium was included in all lipid fractions (triacylglycerols, dyacylglycerols, phospholipids, nonetherified fatty acids; the maximum amount of selenium-containing lipids wasrecorded in chloroplasts. The increase in the contents of carotenoids caused by the actions of experimental factors played an exceptional role in the mechanism of antioxidant protection that prevents destruction of chlorophyll and, accordingly, increases its amount in cells. Changes in the functioning of the photosynthetic apparatus of Ch. vulgaris affect the whole complex of metabolic transformation. Thus, the successful cultivation of chlorella, enriched with selenium and biogenic metals, is possible within seven days under the influence of 10 mg Se4+/dm3 and the above-mentioned concentration of metal ions.

  11. AgSbSe{sub 2} and AgSb(S,Se){sub 2} thin films for photovoltaic applications

    Energy Technology Data Exchange (ETDEWEB)

    Garza, J.G. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Shaji, S. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Facultad de Ingenieria Mecanica y Electrica, CIIDIT - Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico); Rodriguez, A.C.; Das Roy, T.K. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Krishnan, B., E-mail: kbindu_k@yahoo.com [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Facultad de Ingenieria Mecanica y Electrica, CIIDIT - Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico)

    2011-10-01

    Silver antimony selenide (AgSbSe{sub 2}) thin films were prepared by heating sequentially deposited multilayers of antimony sulphide (Sb{sub 2}S{sub 3}), silver selenide (Ag{sub 2}Se), selenium (Se) and silver (Ag). Sb{sub 2}S{sub 3} thin film was prepared from a chemical bath containing SbCl{sub 3} and Na{sub 2}S{sub 2}O{sub 3}, Ag{sub 2}Se from a solution containing AgNO{sub 3} and Na{sub 2}SeSO{sub 3} and Se thin films from an acidified solution of Na{sub 2}SeSO{sub 3}, at room temperature on glass substrates. Ag thin film was deposited by thermal evaporation. The annealing temperature was 350 deg. C in vacuum (10{sup -3} Torr) for 1 h. X-ray diffraction analysis showed that the thin films formed were polycrystalline AgSbSe{sub 2} or AgSb(S,Se){sub 2} depending on selenium content in the precursor films. Morphology and elemental analysis of these films were done using scanning electron microscopy and energy dispersive X-ray spectroscopy. Optical band gap was evaluated from the UV-visible absorption spectra of these films. Electrical characterizations were done using Hall effect and photocurrent measurements. A photovoltaic structure: glass/ITO/CdS/AgSbSe{sub 2}/Al was formed, in which CdS was deposited by chemical bath deposition. J-V characteristics of this structure showed V{sub oc} = 435 mV and J{sub sc} = 0.08 mA/cm{sup 2} under illumination using a tungsten halogen lamp. Preparation of a photovoltaic structure using AgSbSe{sub 2} as an absorber material by a non-toxic selenization process is achieved.

  12. Optical properties of Zn{sub 1-x}Mg{sub x}Se epilayers studied by spectroscopy methods[thin films

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, G; Gapinski, A; Derkowska, B; Bala, W [Institute of Physics, N. Copernicus University, Torun (Poland); Sahraoui, B [Laboratoire des Proprietes Optiques des Materiaux et Applications (POMA), Universite d' Angeres, Angeres (France)

    1998-07-01

    Linear optical properties of Zn{sub 1-x}Mg{sub x}Se (0 {<=} x {<=} 0.4) alloys have been studied using reflectance, spectroscopic ellipsometry and photoluminescence measurements. The refractive indexes of Zn{sub 1-x}Mg{sub x}Se epilayers were investigated as a function of Mg composition (0 {<=} x {<=} 0.4). The energies of band gap E{sub g} and spin-orbit splitting E{sub g} + {delta}, have been determined. These energies are shifted gradually to higher values with increasing Mg content. (author)

  13. Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV-assisted) approach using Na2 SeO3 as Se source and investigating optical properties.

    Science.gov (United States)

    Khafajeh, R; Molaei, M; Karimipour, M

    2017-06-01

    In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na 2 SeO 3 as the Se source by a rapid and room temperature photochemical (UV-assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV-visible (UV-vis) spectroscopy, Fourier transform-infrared (FT-IR), and energy dispersive X-ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round-shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the 2 T 2 acceptor levels of Cu 2 + . The emission was increased by increasing the Cu 2 + ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%. Copyright © 2016 John Wiley & Sons, Ltd.

  14. Correlation between processing conditions of Cu2ZnSn(SxSe1-x)4 and modulated surface photovoltage

    Science.gov (United States)

    Lin, X. Z.; Dittrich, Th.; Fengler, S.; Lux-Steiner, M. Ch.; Ennaoui, A.

    2013-04-01

    Cu2ZnSn(SxSe1-x)4 (CZTSSe) layers deposited from multi-component nanoparticle inks were characterized by modulated surface photovoltage (SPV) spectroscopy to investigate the effect of annealing conditions. The SPV signals increased strongly with decreasing sulfur content. Band gaps were obtained in terms of SPV onset energy. A diffusion length of above 1 μm was estimated for photo-generated electrons at x = 0.28. The band gap increased with increasing x showing an anomaly in the range of 0.5 < x < 1. The results suggested that an excess of selenium is required for the formation of a photo-active phase reliable for efficient Cu2ZnSn(SxSe1-x)4-based solar cells.

  15. PIGMENT CONTENT OF Chlorella vulgaris BEIJ. UNDER INFLUENCE OF THE SODIUM SELENITE AND METALS IONS

    Directory of Open Access Journals (Sweden)

    O. I.

    2016-02-01

    Full Text Available The aim of the research was to determine the conditions obtaining in the aquaculture of Chlorella vulgaris Beij. algosubstantion enriched with selenium and bioactive metals. For this purpose, the content of seaweed pigments studied by the action of sodium selenite in a concentration based on Se4+: 0.5, 5.0, 10.0 and 20.0 mg / dm3 for 1, 3 and 7 days and while exposed 10.0 mg Se4 +/dm3 and Zn2+, Mn2 +, Co2 +, Cu2 +, Fe3 + in concentrations of 5.0 mg/dm 3, 0.25, 0.002, 0.008 and 0.05 mg/dm3, respectively, within 7 days of culturing. The content of pigments was determined spectrophotometrically, the cellular walls were given off in the percoll gradient and investigated microscopically. The pigments content in Ch. vulgaris increase by 1,5–2,5 times in comparison with control sample under the influence of 10 mg Se(IV/dm3 with and without metal ions. In the same condition a ratio of chlorophylls a/b increased, that accompanied by the formation in cells of the second cell wall as the sign of successful adaptation process in the Chlorella cells under the influence of these factors. Thus, the cultivation of chlorella, enriched with selenium and bioactive metals, is possible within 7 days under the influence of 10 mg Se (IV/dm3 and mentioned concentration of these metal ions.

  16. Tribological properties of copper-based composites with copper coated NbSe2 and CNT

    International Nuclear Information System (INIS)

    Chen, Beibei; Yang, Jin; Zhang, Qing; Huang, Hong; Li, Hongping; Tang, Hua; Li, Changsheng

    2015-01-01

    Graphical abstract: Morphology of copper coated NbSe 2 and CNT; friction coefficient and wear rate of copper-based composites. - Highlights: • NbSe 2 and CNT were coated with copper layers by the means of electroless plating. • The mechanical and tribological properties of copper composites were studied. • The enhancement mechanisms of copper coated NbSe 2 and CNT were proposed. • Copper–copper coated (12 wt.%NbSe 2 –3 wt.%CNT) composite had the best wear resistance. - Abstract: Copper-based composites with copper coated NbSe 2 and/or CNT were fabricated by the powder metallurgy technique. The morphology and phase composition of copper coated NbSe 2 and carbon nanotube (CNT) were observed using high solution transmission electronic microscope (HRTEM), scanning electronic microscope (SEM equipped with EDS) and X-ray diffraction (XRD). The density, hardness, and bending strength of as-prepared copper-based composites were measured, and their tribological properties were investigated using UMT-2 tester. Results indicated that all copper-based composites showed decreased density and bending strength, but increased hardness in comparison with copper matrix. Besides, the incorporation of copper coated NbSe 2 improved the friction-reducing and anti-wear properties of copper matrix. Addition of copper coated CNT greatly enhanced the mechanical and tribological properties. In particular, when the content of copper coated CNT was 3 wt.%, the corresponding composite exhibited the best tribological properties. This was because NbSe 2 was distributed chaotically in matrix, which greatly improved the friction-reducing property of copper, while CNT with superior mechanical strength enhanced the wear resistance by increasing the load-carrying capacity. More importantly, copper layers coated on NbSe 2 and CNT favored the good interfacial combination between fillers and copper matrix showing beneficial effect for the stresses transferring from matrix to fillers

  17. Optical studies of CdSe/HgSe and CdSe/Ag2Se core/shell nanoparticles embedded in gelatin

    International Nuclear Information System (INIS)

    Azhniuk, Yu M; Dzhagan, V M; Valakh, M Ya; Raevskaya, A E; Stroyuk, A L; Kuchmiy, S Ya; Zahn, D R T

    2008-01-01

    CdSe/HgSe and CdSe/Ag 2 Se core-shell nanoparticles are obtained by colloidal synthesis from aqueous solutions in the presence of gelatin. Optical absorption, luminescence, and Raman spectra of the nanoparticles obtained are measured. The variation of the optical spectra of CdSe/HgSe and CdSe/Ag 2 Se core-shell nanoparticles with the shell thickness is discussed. Sharp non-monotonous variation of the photoluminescence spectra at low shell coverage is observed.

  18. Decreasing the NO3 and increasing the vitamin C contents in spinach by a nitrogen deprivation method.

    Science.gov (United States)

    Mozafar, A

    1996-02-01

    Excessive use of nitrogen fertilizers is known to increase the NO3 and reduce the vitamin C contents in fruits and vegetables. We investigated the concentration of these compounds in spinach leaves when plants were transferred to nitrogen-free media prior to their harvest. It was noted that a pre-harvest transfer of spinach to N-free media reduces the NO3 and increases the vitamin C content of the leaves by a substantial amount in a 2-3 day period. It is suggested that this technique may be suited to produce spinach or other leafy vegetables with low NO3 and high vitamin C contents under commercial hydroponic conditions.

  19. Seed-specific overexpression of AtFAX1 increases seed oil content in Arabidopsis.

    Science.gov (United States)

    Tian, Yinshuai; Lv, Xueyan; Xie, Guilan; Zhang, Jing; Xu, Ying; Chen, Fang

    2018-06-02

    Biosynthesis of plant seed oil is accomplished through the coordinate action of multiple enzymes in multiple subcellular compartments. Fatty acid (FA) has to be transported from plastid to endoplasmic reticulum (ER) for TAG synthesis. However, the role of plastid FA transportation during seed oil accumulation has not been evaluated. AtFAX1 (Arabidopsis fatty acid export1) mediated the FA export from plastid. In this study, we overexpressed AtFAX1 under the control of a seed specific promoter in Arabidopsis. The resultant overexpression lines (OEs) produced seeds which contained 21-33% more oil and 24-30% more protein per seed than those of the wild type (WT). The increased oil content was probably because of the enhanced FA and TAG synthetic activity. The seed size and weight were both increased accordingly. In addition, the seed number per silique and silique number per plant had no changes in transgenic plants. Taken together, our results demonstrated that seed specific overexpression of AtFAX1 could promote oil accumulation in Arabidopsis seeds and manipulating FA transportation is a feasible strategy for increasing the seed oil content. Copyright © 2018 Elsevier Inc. All rights reserved.

  20. Effect of sodium diffused into Bridgman CuInSe{sub 2+x}

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sunyoung, E-mail: sunyoung.park@mail.mcgill.ca; Champness, Clifford H.; Shih, Ishiang

    2016-10-15

    Highlights: For elemental Na diffused into Bridgman CuInSe2 samples: • Diffusion is deep and relatively fast, with a coefficient of 10{sup −10} to 10{sup −8} cm{sup 2}/s at 250 °C. • Creates clear n/p homojunctions in the chalcopyrite. • Creates, after subsequent air annealing, an XPS Se 3d peak at 59 eV for Na{sub 2}SeO{sub 3}. • Increases the XPS-determined [Se]/[Cu] concentration ratio at the sample surface. - Abstract: The study describes diffusion of elemental sodium into p-type samples of Bridgman-grown CuInSe{sub 2+x}, causing a change from p- to n-type behavior at the surface and deep into the material. This resulted in the creation of Na 1s and Se 3d XPS peaks at binding energies of 1071 and 54.5 eV respectively, where the latter has been attributed to CuInSe{sub 2} itself. Subsequent annealing of the samples in air gave rise to a second Se 3d peak at 59 eV, attributed to Na{sub 2}SeO{sub 3} by oxidation of Na{sub 2}Se. However, SeO{sub 2} also gives a peak at about the same binding energy. The presence of the diffused-in Na up to about 10% at the surface appears to promote the creation of a high ratio [Se]/[Cu] compound at the expense of the chalcopyrite at the sample surface. The diffused-in samples showed n/p homojunctions at depths of tens of microns for stoichiometric CuInSe{sub 2} and at smaller depths for CuInSe{sub 2.2}, with excess Se content. Estimates of the diffusion coefficient for Na into the Bridgman samples at 250 °C were in the range of 10{sup −10}–10{sup −8} cm{sup 2}/s.

  1. Experimental hypothyroidism increases content of collagen and glycosaminoglycans in the heart.

    Science.gov (United States)

    Drobnik, J; Ciosek, J; Slotwinska, D; Stempniak, B; Zukowska, D; Marczynski, A; Tosik, D; Bartel, H; Dabrowski, R; Szczepanowska, A

    2009-09-01

    The connective tissue matrix of the heart remains under regulatory influence of the thyroid hormones. Some conflicting data describe the connective tissue changes in subjects with thyroid gland disorders. The aim of the study was to assess the changes of the connective tissue accumulation in the heart of rats in the state of hypothyroidism and to answer the question whether TSH is involved in mechanism of the observed phenomena. Hypothyroidism in rats was induced by methylotiouracil treatment or by thyreoidectomy. The thyroid hormones [freeT3 (fT3), freeT4 (fT4)] and pituitary TSH were measured in plasma with radioimmunological method. The glycosaminoglycans (GAG) and total collagen were measured in heart muscle of both left and right ventricles. Cells from the rat's heart were isolated and cultured. The cells were identified as myofibroblasts by electron microscopy method. The effects of TSH in concentrations ranging from 0.002 to 20 mIU/ml, on connective tissue accumulation in heart myofibroblasts cultures were tested. The primary hypothyroidism was developed both in groups with thyroidectomy and with methylthiouracil. The levels of fT3 and fT4 both in rats with thyreoidectomy and animals treated with methylthiouracil were decreased and TSH level in these two experimental groups was elevated. In the heart of the rats with experimental hypothyroidism increased content of both GAG and collagen was found. Myofibroblast number in culture was increased by TSH. Regardless of the method of its induction, hypothyroidism increased collagen and GAG contents in the heart. TSH is not involved in regulation of collagen and glycosaminoglycans accumulation in the heart of rats affected with primary hypothyroidism.

  2. Migration of {sup 75}Se(IV) in crushed Beishan granite: Effects of the iron content

    Energy Technology Data Exchange (ETDEWEB)

    He, Jiangang; Ma, Bin; Kang, Mingliang; Wang, Chunli; Nie, Zhe; Liu, Chunli, E-mail: liucl@pku.edu.cn

    2017-02-15

    Highlights: • The diffusion of {sup 75}SeO{sub 3}{sup 2−} in crushed BsG was slowest at approximately pH 5. • The D{sub a} values under aerobic conditions were nearly one order of magnitude lower than those under anaerobic conditions. • Fe(II)-bearing mineralogical components can be responsible for the great difference in D{sub a} values. • Se{sup IV} can be reduced to Se{sup 0} by BsG under anaerobic conditions. - Abstract: The diffusion of selenite (labeled with {sup 75}Se) in compacted Beishan granite (BsG) was investigated using the in-diffusion capillary method at pH values from ∼2.0 to ∼11.0 under oxic and anoxic conditions. The results indicate that the apparent diffusion coefficient (D{sub a}) values of selenite in BsG always reached the minimum at approximately pH 5. Unexpectedly, the D{sub a} values under oxic conditions are nearly one order of magnitude lower than those under the anoxic conditions. Further characterization reveals the existence of redox-sensitive Fe(II)-containing components, which can be responsible for the great difference in D{sub a} values. Fe(2p) X-ray photoelectron spectroscopy (XPS) results show that more Fe(III)-oxyhydroxide coating is formed on the granite’s surface under aerobic conditions than is formed under anaerobic conditions. Correspondingly, Se(3d) spectra indicate that more selenium is sorbed under oxic conditions, and the sorbed amount always reached the maximum at pH values from ∼4 to ∼5. A linear combination fit of X-ray absorption near edge structure (XANES) spectroscopy data revealed that Se(0) was formed under anoxic condition and that selenite preferred to form inner-sphere complexes with Fe(III)-oxyhydroxide. Overall, this study indicates that natural Fe-bearing minerals can greatly attenuate selenite diffusion and the retardation would be enhanced under aerobic conditions.

  3. CdSe nanorod/TiO2 nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity

    Directory of Open Access Journals (Sweden)

    Fakher Laatar

    2017-12-01

    Full Text Available CdSe nanorods (NRs with an average length of ≈120 nm were prepared by a solvothermal process and associated to TiO2 nanoparticles (Aeroxide® P25 by annealing at 300 °C for 1 h. The content of CdSe NRs in CdSe/TiO2 composites was varied from 0.5 to 5 wt %. The CdSe/TiO2 heterostructured materials were characterized by XRD, TEM, SEM, XPS, UV–visible spectroscopy and Raman spectroscopy. TEM images and XRD patterns show that CdSe NRs with wurtzite structure are associated to TiO2 particles. The UV–visible spectra demonstrate that the narrow bandgap of CdSe NRs serves to increase the photoresponse of CdSe/TiO2 composites until ≈725 nm. The CdSe (2 wt %/TiO2 composite exhibits the highest photocatalytic activity for the degradation of rhodamine B in aqueous solution under simulated sunlight or visible light irradiation. The enhancement in photocatalytic activity likely originates from CdSe sensitization of TiO2 and the heterojunction between these materials which facilitates electron transfer from CdSe to TiO2. Due to its high stability (up to ten reuses without any significant loss in activity, the CdSe/TiO2 heterostructured catalysts show high potential for real water decontamination.

  4. Increase of (CdSe/ZnS)Cys quantum dot luminescence intensity in the presence of TPPS4 porphyrin

    International Nuclear Information System (INIS)

    Parra, Gustavo G.; Borissevitch, Iouri E.; Oleinikov, Vladimir A.

    2012-01-01

    Full text: Nanocrystal semiconductor particles or Quantum Dots (QD) possess extraordinary photophysical characteristics, such as extreme high fluorescence quantum yield and optical absorption and very narrow fluorescence band, which can be easily shifted by changing of QD particle size. Due to these characteristics, QD is promising for fluorescence cancer diagnostics and photodynamic treatment. The efficiency of these processes can be in- creased by energy transfer between QD and classic fluorescence probes and photosensitizers (PS). In this work we present on the study of the increase of (CdSe/ZnS)Cys quantum dot luminescence intensity, stimulated by interaction with TPPS 4 porphyrin. The optical absorption and steady-state and time-resolved fluorescence techniques were employed. Water soluble QD (CdSe/ZnS) with emission at 580 nm, functionalized with cysteine (Cys), were studied. TPPS 4 porphyrin was used as a stimulator of QD luminescence. All experiments were realized in PBS buffer (pH 7.3; 7.5 mM) in Milli-Q quality water. The TPPS 4 adding into the QD solutions until the 5μM concentration produced an increase in QD luminescence intensity and lifetime, while for TPPS 4 concentrations higher than 20μM the reduction of the fluorescence intensity was observed, the emission spectra and fluorescence decays profile being unchanged. This effect can not be due to the electrostatic interaction between (CdSe/ZnS)Cys and TPPS 4 because both, (CdSe/ZnS)Cys and TPPS 4 , are negatively charged. We suppose that TPPS 4 porphyrin interacts directly with QD (ZnS) shell, reducing the dangling bound number. This reduction decreases, in turn, the probability of nonradiative ways of the excitation energy dissipation. When the majority of dangling bound is occupied by the TPPS 4 molecules, the effect of QD luminescence reduction (quenching) by porphyrin predominates, probably, via the energy transfer from QD to TPPS 4 . However, because of complexity in the systems involving

  5. Fabrication mechanism of FeSe superconductors with high-energy ball milling aided sintering process

    International Nuclear Information System (INIS)

    Zhang, Shengnan; Liu, Jixing; Feng, Jianqing; Wang, Yao; Ma, Xiaobo; Li, Chengshan; Zhang, Pingxiang

    2015-01-01

    FeSe Superconducting bulks with high content of superconducting PbO-type β-FeSe phase were prepared with high-energy ball milling (HEBM) aided sintering process. During this process, precursor powders with certain Fe/Se ratio were ball milled first then sintered. The influences of HEBM process as well as initial Fe/Se ratio on the phase evolution process were systematically discussed. With HEBM process and proper initial Fe/Se ratio, the formation of non-superconducting hexagonal δ-FeSe phase were effectively avoided. FeSe bulk with the critical temperature of 9.0 K was obtained through a simple one-step sintering process with lower sintering temperature. Meanwhile, the phase evolution mechanism of the HEBM precursor powders during sintering was deduced based on both the thermodynamic analysis and step-by-step sintering results. The key function of the HEBM process was to provide a high uniformity of chemical composition distribution, thus to successfully avoide the formation of intermediate product during sintering, including FeSe 2 and Fe 7 Se 8 . Therefore, the fundamental principal for the synthesis of FeSe superconductors were concluded as: HEBM aided sintering process, with the sintering temperature of >635 °C and a slow cooling process. - Highlights: • A novel synthesis technique was developed for FeSe based superconductors. • FeSe bulks with high Tc and high β-FeSe phase content has been obtained. • Phase evolution process for the HEBM aided sintering process was proposed

  6. [Evaluation of the possibilities to increase the content of conjugated linoleic acid (CLA) in meat and meat product].

    Science.gov (United States)

    Piotrowska, Anna; Swiader, Katarzyna; Waszkiewicz-Robak, Bozena; Swiderski, Franciszek

    2012-01-01

    The paper characterizes pro-health properties of conjugated linoleic acid (CLA) and assesses the possibility of increasing their content in pork and pork meat products. Studies conducted on animals indicate antitumor, antiatherosclerotic and antiinflammatory effect ofCLA, also find impact on reducing body fat and increasing muscle growth. However, the number of observations concerning human populations is insufficient to fully evaluate the relationship between CLA intake and reducing the risk of lifestyle diseases. Therefore, it is necessary to conduct further research. Literature data indicate that the use in pigs feed suplementation with CLA preparations, can increase the content of these compounds in the meat and also show, that isomer cis-9, trans-11 is accumulated at significantly higher level. However, these changes were accompanied by increased the share of saturated fatty acids at the expense of monounsaturated which is unfavorable for human health. A better way to increase the CLA content in pork meat appears to be the addition of CLA preparation during the production process, because it does not affect the level of saturated fats. Pork and pork meat products enriched in CLA are characterized by low susceptibility to oxidation, which may result from the coupling of double bonds, antioxidantive properties of conjugated linoleic acid and the increased content of saturated fatty acids. The issue of beneficial effects on human health of pork and pork products with a higher content of CLA, requires further studies conducted on humans. Only then these products can be classified as a functional foods.

  7. Latex content and biomass increase in Mycorrhizal guayule (Parthenium argentatum) under field conditions

    Energy Technology Data Exchange (ETDEWEB)

    Bloss, H.E.; Pfeiffer, C.M.

    1984-01-01

    Guayule seedlings were inoculated with two Glomus species in pasteurised soil and grown in the glasshouse without added fertilizer for 8 weeks prior to transplanting to the field. The survival rate of transplanted guayule seedlings was increased by inoculation with vesicular arbuscular mycorrhizal fungi compared wtih uninoculated controls. Inoculated guayule had greater concentrations of Ca, Fe, Mg and Mn at six months of age, and greater concentrations of Ca, Mg, and Zn at 12 months of age than did uninoculated plants. The latex content of both roots and shoots of guayule was greater in inoculated than in uninoculated guayule plants at 12 and 18 months of age. The resin content remained unchanged between treatments irrespective of sampling date.

  8. ZnSe/ZnSeTe Superlattice Nanotips

    Directory of Open Access Journals (Sweden)

    Young SJ

    2010-01-01

    Full Text Available Abstract The authors report the growth of ZnSe/ZnSeTe superlattice nanotips on oxidized Si(100 substrate. It was found the nanotips exhibit mixture of cubic zinc-blende and hexagonal wurtzite structures. It was also found that photoluminescence intensities observed from the ZnSe/ZnSeTe superlattice nanotips were much larger than that observed from the homogeneous ZnSeTe nanotips. Furthermore, it was found that activation energies for the ZnSe/ZnSeTe superlattice nanotips with well widths of 16, 20, and 24 nm were 76, 46, and 19 meV, respectively.

  9. Composition-dependent nanostructure of Cu(In,Ga)Se{sub 2} powders and thin films

    Energy Technology Data Exchange (ETDEWEB)

    Schnohr, C.S., E-mail: c.schnohr@uni-jena.de [Institut für Festkörperphysik, Friedrich-Schiller-Universität Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Kämmer, H.; Steinbach, T.; Gnauck, M. [Institut für Festkörperphysik, Friedrich-Schiller-Universität Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Rissom, T.; Kaufmann, C.A.; Stephan, C. [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Schorr, S. [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Institut für Geologische Wissenschaften, Freie Universität Berlin, Malteserstr. 74-100, 12249 Berlin (Germany)

    2015-05-01

    Atomic-scale structural parameters of Cu(In,Ga)Se{sub 2} powders and polycrystalline thin films were determined as a function of the In and Cu contents using X-ray absorption spectroscopy. No difference in the two sample types is observed for the average bond lengths demonstrating the strong tendency towards bond length conservation typical for tetrahedrally coordinated semiconductors. In contrast, the bond length variation is significantly smaller in the thin films than in the powders, particularly for Cu-poor material. This difference in the nanostructure is proposed to originate from differences in the preparation conditions, most prominently from the different history of Cu composition. - Highlights: • Cu(In,Ga)Se{sub 2} powders and thin films are studied with X-ray absorption spectroscopy. • Structural parameters are determined as a function of the In and Cu contents. • The element-specific average bond lengths are identical for powders and thin films. • The Ga-Se/In-Se bond length variation is smaller for thin films than for powders. • The differences are believed to stem from the different history of the Cu content.

  10. Influence of composition on optical and dispersion parameters of thermally evaporated non-crystalline Cd{sub 50}S{sub 50−x}Se{sub x} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Hassanien, A.S., E-mail: a.s.hassanien@gmail.com [Engineering Mathematics and Physics Dept., Faculty of Engineering (Shoubra), Benha University (Egypt); Physics Department, Faculty of Science and Humanities in Ad-Dawadmi, Shaqra University, 11911 (Saudi Arabia); Akl, Alaa A. [Physics Department, Faculty of Science and Humanities in Ad-Dawadmi, Shaqra University, 11911 (Saudi Arabia)

    2015-11-05

    Non-crystalline thin films of chalcogenide Cd{sub 50}S{sub 50−x}Se{sub x} system (30 ≤ x ≤ 50) were obtained by thermal evaporation technique onto a pre-cleaned glass substrate at a vacuum of 8.2 × 10{sup −4} Pa. The deposition rate and film thickness were kept constant at about 8 nm/s and 200 nm, respectively. Amorphous/crystalline nature and chemical composition of films have been checked using X-ray diffraction and energy dispersive X-ray spectroscopy (EDX). Optical properties of thin films were investigated and studied using the corrected transmittance, T(λ) and corrected reflectance, R(λ) measurements. Obtained data reveal that, the indirect optical energy gap (E{sub g}) was decreased from 2.21 to 1.57 eV. On the contrary, Urbach energy (band tail width), E{sub U} was found to be increased from 0.29 to 0.45 eV. This behavior is believed to be associated with the increase of Se-content instead of S-content in the thin films of Cd{sub 50}S{sub 50−x}Se{sub x} system. Chemical bond approach model, CBA was used to analyze the obtained values of E{sub g} and E{sub U}. Optical density, skin depth, extinction coefficient, refractive index and optical conductivity of chalcogenide CdSSe thin films were discussed as functions of Se-content. Using Wemple-DiDomenico single oscillator model, the refractive index dispersion and energy parameters and their dependence on Se content were studied. - Highlights: • Amorphous thin films of thickness 200 nm of Cd{sub 50}S{sub 50−x}Se{sub x} (30 ≤ x ≤ 50) have prepared. • Optical properties, indirect optical energy gap and band tail width were studied. • Chemical bond approach, CBA was used to analyze the obtained values of E{sub g} and E{sub U}. • New data of dispersion refractive index parameters were investigated and discussed.

  11. Effect of Composition on Electrical and Optical Properties of Thin Films of Amorphous GaxSe100−x Nanorods

    Directory of Open Access Journals (Sweden)

    Abdallah El-Hamidy SM

    2010-01-01

    Full Text Available Abstract We report the electrical and optical studies of thin films of a-GaxSe100−x nanorods (x = 3, 6, 9 and 12. Thin films of a-GaxSe100−x nanorods have been synthesized thermal evaporation technique. DC electrical conductivity of deposited thin films of a-GaxSe100−x nanorods is measured as a function of temperature range from 298 to 383 K. An exponential increase in the dc conductivity is observed with the increase in temperature, suggesting thereby a semiconducting behavior. The estimated value of activation energy decreases on incorporation of dopant (Ga content in the Se system. The calculated value of pre-exponential factor (σ0 is of the order of 101 Ω−1 cm−1, which suggests that the conduction takes place in the band tails of localized states. It is suggested that the conduction is due to thermally assisted tunneling of the carriers in the localized states near the band edges. On the basis of the optical absorption measurements, an indirect optical band gap is observed in this system, and the value of optical band gap decreases on increasing Ga concentration.

  12. The effects of staggered bandgap in the InP/CdSe and CdSe/InP core/shell quantum dots.

    Science.gov (United States)

    Kim, Sunghoon; Park, Jaehyun; Kim, Sungwoo; Jung, Won; Sung, Jaeyoung; Kim, Sang-Wook

    2010-06-15

    New type-II structures of CdSe/InP and InP/CdSe core-shell nanocrystals which have staggered bandgap alignment were fabricated. Using a simple model for the wave function for electrons and holes in InP/CdSe and CdSe/InP core/shell nanocrystals showed the wave function of the electron and hole spread into the shell, respectively. The probability density of the InP/CdSe and CdSe/InP core/shell QDs also showed a similar tendency. As a result, the structure exhibits increased delocalization of electrons and holes, leading to a red-shift in absorption and emission. Quantum yield increased in the InP/CdSe, however decreased in the CdSe/InP. The reason may be due to the surface trap and high activation barrier for de-trapping in the InP shell. 2010 Elsevier Inc. All rights reserved.

  13. The Formation Mechanism of Cu(In0.7Ga0.3Se2 Nanoparticles and the Densification Trajectory of the Se-Rich Quaternary Target by Hot Pressing

    Directory of Open Access Journals (Sweden)

    Qiang Ma

    2018-03-01

    Full Text Available In this paper, a method to obtain the CuInGaSe2 (CIGS absorber layer with an appropriate selenium content is put forward, in which a Se-rich target is used to deposit a CIGS thin-film and this film is annealed in a Se-free inert atmosphere. The key issue of this method is the preparation of a Se-rich target with a homogeneous composition and a high-density. The formation mechanism of CuInSe2 and CuGaSe2 is investigated and the results point to the intermediate phase Cu2−xSe playing a role of a nucleation core. The sintering densification trajectory of the target with the addition of extra selenium is researched. Additionally, an effective way to avoid the sintering defects is proposed. Finally, a conversion efficiency of 11.2% for the CIGS solar cell is reached by sputtering from the obtained Se-rich target.

  14. Electrodeposition and characterization of CdSe{sub x}Te{sub 1-x} semiconducting thin films

    Energy Technology Data Exchange (ETDEWEB)

    Benamar, E.; Rami, M.; Fahoume, M.; Chraibi, F.; Ennaoui, A. [Faculty of Sciences, Laboratory of Materials Physics, Dept. of Physics, Rabat (Morocco)

    1999-07-01

    Thin polycrystalline films of cadmium chalcogenides CdSe{sub x}Te{sub 1-x} (0{<=}x{<=}1) can be used for various technical applications in particular for the conversion of solar energy in photoelectrochemical devices. They have been prepared by electrochemical plating on ITO (indium tin oxide) coated glass substrates from an acid sulfate solution at 90 deg. C. Structural, morphological and compositional studies of the deposited films are reported as a function of the x coefficient. XRD analysis shows that all deposits have a cubic structure with a preferred orientation along the (111) direction. The composition in the films is found to vary linearly with the composition in the solution. The increase in the selenium content x in the CdSe{sub x}Te{sub 1-x} films decreases the lattice constant and increases the band gap. Nevertheless this latter presents a minimum for x = 0.27.

  15. Aqueous-Processed Inorganic Thin-Film Solar Cells Based on CdSe(x)Te(1-x) Nanocrystals: The Impact of Composition on Photovoltaic Performance.

    Science.gov (United States)

    Zeng, Qingsen; Chen, Zhaolai; Zhao, Yue; Du, Xiaohang; Liu, Fangyuan; Jin, Gan; Dong, Fengxia; Zhang, Hao; Yang, Bai

    2015-10-21

    Aqueous processed nanocrystal (NC) solar cells are attractive due to their environmental friendliness and cost effectiveness. Controlling the bandgap of absorbing layers is critical for achieving high efficiency for single and multijunction solar cells. Herein, we tune the bandgap of CdTe through the incorporation of Se via aqueous process. The photovoltaic performance of aqueous CdSexTe1-x NCs is systematically investigated, and the impacts of charge generation, transport, and injection on device performance for different compositions are deeply discussed. We discover that the performance degrades with the increasing Se content from CdTe to CdSe. This is mainly ascribed to the lower conduction band (CB) of CdSexTe1-x with higher Se content, which reduces the driving force for electron injection into TiO2. Finally, the performance is improved by mixing CdSexTe1-x NCs with conjugated polymer poly(p-phenylenevinylene) (PPV), and power conversion efficiency (PCE) of 3.35% is achieved based on ternary NCs. This work may provide some information to further optimize the aqueous-processed NC and hybrid solar cells.

  16. The Influence of Interfaces on Properties of Thin-Film Inorganic Structural Isomers Containing SnSe-NbSe2 Subunits.

    Science.gov (United States)

    Alemayehu, Matti B; Falmbigl, Matthias; Ta, Kim; Johnson, David C

    2015-04-28

    Inorganic isomers ([SnSe]1+δ)m(NbSe2)n([SnSe]1+δ)p(NbSe2)q([SnSe]1+δ)r(NbSe2)s where m, n, p, q, r, and s are integers and m + p + r = n + q + s = 4 were prepared using the modulated elemental reactant technique. This series of all six possible isomers provides an opportunity to study the influence of interface density on properties while maintaining the same unit cell size and composition. As expected, all six compounds were observed to have the same atomic compositions and an almost constant c-axis lattice parameter of ≈4.90(5) nm, with a slight trend in the c-axis lattice parameter correlated with the different number of interfaces in the isomers: two, four and six. The structures of the constituents in the ab-plane were independent of one another, confirming the nonepitaxial relationship between them. The temperature dependent electrical resistivities revealed metallic behavior for all the six compounds. Surprisingly, the electrical resistivity at room temperature decreases with increasing number of interfaces. Hall measurements suggest this results from changes in carrier concentration, which increases with increasing thickness of the thickest SnSe block in the isomer. Carrier mobility scales with the thickness of the thickest NbSe2 block due to increased interfacial scattering as the NbSe2 blocks become thinner. The observed behavior suggests that the two constituents serve different purposes with respect to electrical transport. SnSe acts as a charge donor and NbSe2 acts as the charge transport layer. This separation of function suggests that such heterostructures can be designed to optimize performance through choice of constituent, layer thickness, and layer sequence. A simplistic model, which predicts the properties of the complex isomers from a weighted sum of the properties of building blocks, was developed. A theoretical model is needed to predict the optimal compound for specific properties among the many potential compounds that can be prepared.

  17. Crystallization kinetics, glass transition kinetics, and thermal stability of Se70-xGa30Inx (x=5, 10, 15, and 20) semiconducting glasses

    International Nuclear Information System (INIS)

    Imran, Mousa M.A.

    2011-01-01

    Crystallization and glass transition kinetics of Se 70-x Ga 30 In x (x=5, 10, 15, and 20) semiconducting chalcogenide glasses were studied under non-isothermal condition using a Differential Scanning Calorimeter (DSC). DSC thermograms of the samples were recorded at four different heating rates 5, 10, 15, and 20 K/min. The variation of the glass transition temperature (T g ) with the heating rate (β) was used to calculate the glass transition activation energy (E t ) using two different models. Meanwhile, the variation of the peak temperature of crystallization (T p ) with β was utilized to deduce the crystallization activation energy (E c ) using Kissinger, Augis-Bennet, and Takhor models. Results reveal that E t decreases with increasing In content, while both T g and E c exhibit the opposite behavior, and the crystal growth occurs in one dimension. The variation of these thermal parameters with the average coordination number was also discussed, and the results were interpreted in terms of the type of bonding that In makes with Se. Assessment of thermal stability and glass forming ability (GFA) was carried out on the basis of some quantitative criteria and the results indicate that thermal stability is enhanced while the crystallization rate is reduced with the addition of In to Se-Ga glass. -- Research highlights: → Addition of In to Se-Ga glass decreases the glass transition activation energy. → The crystallization rate in Se-Ga-In glass is reduced as In content increases. → The crystal growth in Se-Ga-In glass occurs in one dimension. → Thermal properties of Se-Ga-In glass indicate a shift in Phillips-Thorpe threshold.

  18. TGF-β1-mediated differentiation of fibroblasts is associated with increased mitochondrial content and cellular respiration.

    Directory of Open Access Journals (Sweden)

    Ulugbek Negmadjanov

    Full Text Available Cytokine-dependent activation of fibroblasts to myofibroblasts, a key event in fibrosis, is accompanied by phenotypic changes with increased secretory and contractile properties dependent on increased energy utilization, yet changes in the energetic profile of these cells are not fully described. We hypothesize that the TGF-β1-mediated transformation of myofibroblasts is associated with an increase in mitochondrial content and function when compared to naive fibroblasts.Cultured NIH/3T3 mouse fibroblasts treated with TGF-β1, a profibrotic cytokine, or vehicle were assessed for transformation to myofibroblasts (appearance of α-smooth muscle actin [α-SMA] stress fibers and associated changes in mitochondrial content and functions using laser confocal microscopy, Seahorse respirometry, multi-well plate reader and biochemical protocols. Expression of mitochondrial-specific proteins was determined using western blotting, and the mitochondrial DNA quantified using Mitochondrial DNA isolation kit.Treatment with TGF-β1 (5 ng/mL induced transformation of naive fibroblasts into myofibroblasts with a threefold increase in the expression of α-SMA (6.85 ± 0.27 RU compared to cells not treated with TGF-β1 (2.52 ± 0.11 RU. TGF-β1 exposure increased the number of mitochondria in the cells, as monitored by membrane potential sensitive dye tetramethylrhodamine, and expression of mitochondria-specific proteins; voltage-dependent anion channels (0.54 ± 0.05 vs. 0.23 ± 0.05 RU and adenine nucleotide transporter (0.61 ± 0.11 vs. 0.22 ± 0.05 RU, as well as mitochondrial DNA content (530 ± 12 μg DNA/106 cells vs. 307 ± 9 μg DNA/106 cells in control. TGF-β1 treatment was associated with an increase in mitochondrial function with a twofold increase in baseline oxygen consumption rate (2.25 ± 0.03 vs. 1.13 ± 0.1 nmol O2/min/106 cells and FCCP-induced mitochondrial respiration (2.87 ± 0.03 vs. 1.46 ± 0.15 nmol O2/min/106 cells.TGF-β1 induced

  19. Evaporación de Cu(In,GaSe2 en lámina delgada para aplicaciones fotovoltaicas

    Directory of Open Access Journals (Sweden)

    Guillén, C.

    2004-04-01

    Full Text Available The aim of this work is to study the structural and optical properties of Cu(In,GaSe2 (CIGS thin films after thermal and chemical treatments. Cu(In,GaSe2 thin films have been obtained by means of the selenization in vacuum or Ar of the metallic precursors evaporated sequentially. The sequence of evaporation was In/Ga/Cu/In. Single-phase chalcopyrite and polycrystalline CIGS films with (112 preferred orientation were obtained. An improvement in the crystallite feature and optical properties is observed after Ar selenization. Band gap energies, Eg, between 0.98 and 1.10 were obtained for different atomic ratios, being dominated by the Ga content. Thin films high absorption coefficient was reduced in band tails, specially when Cu content increases after chemical treatment in KCN.El objetivo de este trabajo es estudiar las propiedades estructurales y ópticas del Cu(In,GaSe2 (CIGS en lámina delgada tras diferentes tratamientos térmicos y químicos. El Cu(In,GaSe2 se ha obtenido mediante la selenización en vacío o Ar de los precursores metálicos evaporados secuencialmente. La secuencia de evaporación seguida fue In/Ga/Cu/In. Se obtuvieron láminas policristalinas de CIGS con estructura calcopirita fuertemente orientada en la dirección (112. Se observó una mejora de la naturaleza cristalina y de las propiedades ópticas tras la selenización en Ar. Se obtuvieron energías de banda prohibida, Eg, entre 0.98 y 1.10 eV para las diferentes relaciones atómicas, estando dominadas por el contenido de Ga. Se consiguió reducir la alta absorción por colas de banda de las láminas delgadas, especialmente cuando aumentaba el contenido de Cu, tras un tratamiento químico en KCN.

  20. Different effect of quenching temperature on Fe1+σTe0.5Se0.5 and β-FeSe

    Directory of Open Access Journals (Sweden)

    Zhongnan Guo

    2015-02-01

    Full Text Available In this work, we have demonstrated a different effect on Fe1+σTe0.5Se0.5 and β-FeSe by changing the quenching temperature. Tc is clearly reduced in Fe1+σTe0.5Se0.5 after increasing the quenching temperature from 300 °C to 500 °C, while that of β-FeSe is almost unchanged. Structure refinement indicates that after quenched at 500 °C, FeTe4 tetrahedron exhibits an expansion with the stretched Fe-Te bond, together with the increased amount of interstitial iron. These particular changes on structure are believed to be responsible for the suppression of superconductivity in Fe1+σTe0.5Se0.5.

  1. Personalized Social Network Activity Feeds for Increased Interaction and Content Contribution

    Directory of Open Access Journals (Sweden)

    Shlomo eBerkovsky

    2015-10-01

    Full Text Available Online social networks were originally conceived as means of sharing information and activities with friends, and their success has been one of the primary contributors of the tremendous growth of the Web. Social network activity feeds were devised as a means to aggregate recent actions of friends into a convenient list. But the volume of actions and content generated by social network users is overwhelming, such that keeping users up-to-date with friend activities is an ongoing challenge for social network providers. Personalization has been proposed as a solution to combat social network information overload and help users to identify the nuggets of relevant information in the incoming flood of network activities. In this paper, we propose and thoroughly evaluate a personalized model for predicting the relevance of the activity feed items, which informs the ranking of the feeds and facilitates personalization. Results of a live study show that the proposed feed personalization approach successfully identifies and promotes relevant feed items and boosts the uptake of the feeds. In addition, it increases the contribution of user-generated content to the social network and spurs interaction between users.

  2. Using Content Acquisition Podcasts to Increase Student Knowledge and to Reduce Perceived Cognitive Load

    Science.gov (United States)

    Kennedy, Michael J.; Hirsch, Shanna Eisner; Dillon, Sarah E.; Rabideaux, Lindsey; Alves, Kathryn D.; Driver, Melissa K.

    2016-01-01

    The use of multimedia-driven instruction in college courses is an emerging practice designed to increase students' knowledge. However, limited research has validated the effectiveness of using multimedia to teach students about functional behavioral assessments (FBAs). To test the effectiveness of a multimedia tool called Content Acquisition…

  3. The influence of Se content of the seed and the root of Areca catechu by fermenting of Acetobacter–Saccharomyces consortium as an antimicrobial gargle

    Directory of Open Access Journals (Sweden)

    TITIN YULINERI

    2006-01-01

    Full Text Available The research on the using of Areca catechu seeds and roots extract contain selenium which fermented by Acetobacter–Saccharomyces consortium as a gargle had been conducted. The aim of the research was to know the influence of Se content of the seed and the root of Areca catechu by fermenting of Acetobacter–Saccharomyces consortium on the growth of Streptococcus mutans bacteria. The research consisted of four stages i.e. fermented the extract, isolated S. mutans, tested the activity of the antimicrobial and analyzed selenium concentration in the extract. The result showed that the concentration of selenium has fluctuation. The highest content of selenium of the seeds extract at 2.2 g/L concentration was 3.05 ppb on the fifteenth day while on the root extract at 8.8 g/L was 14.03 ppb on the twenty first day fermentation. Both of the extract has potential used as antiseptic gargle. The antimicrobial agents could inhibit the growth of S. mutans better than the three kinds of commercial gargles.

  4. Ocean to continent transfer of atmospheric Se as revealed by epiphytic lichens

    International Nuclear Information System (INIS)

    Wen Hanjie; Carignan, Jean

    2009-01-01

    There is still a long-term debate concerning the relative contributions of naturally emitted and anthropogenic Se at the regional and local scales. Here, Se and heavy metal concentrations are reported for epiphytic lichens collected in coastal and inland areas from the USA, Canada and France for assessing atmospheric Se source. Correlations found between Se and Cl in lichens confirmed the major marine biogenic source for atmospheric Se. Continental samples do not show systematic relationships between Se and other metal (Pb, Cu, In ...) contents, even for lichens collected in the vicinity of smelters or close to urban areas. Our results suggest that, although anthropogenic Se may be present, the marine biogenic Se source is a major contributor to atmospheric Se for our sampling locations. The contribution of naturally emitted atmospheric Se may be significant in urban and industrial areas and should be taken into account for further studies. - Although anthropogenic Se may be present, the contribution of naturally emitted atmospheric Se may be significant in urban and industrial areas and should be taken into account for further studies.

  5. Design and verification of bituminous mixtures with the increased content of reclaimed asphalt pavement

    Science.gov (United States)

    Bańkowski, Wojciech; Król, Jan; Gałązka, Karol; Liphardt, Adam; Horodecka, Renata

    2018-05-01

    Recycling of bituminous pavements is an issue increasingly being discussed in Poland. The analysis of domestic and foreign experience indicates a need to develop this technology in our country, in particular the hot feeding and production technologies. Various steps are being taken in this direction, including research projects. One of them is the InnGA project entitled: “Reclaimed asphalt pavement: Innovative technology of bituminous mixtures using material from reclaimed asphalt pavement”. The paper presents the results of research involving the design of bituminous mixtures in accordance with the required properties and in excess of the content of reclaimed asphalt permitted by the technical guidelines. It presents selected bituminous mixtures with the content of RAP of up to 50% and the results of tests from verification of industrial production of those mixtures. The article discusses the details of the design process of mixtures with a high content of reclaimed asphalt, the carried out production tests and discusses the results of tests under the verification of industrial production. Testing included basic tests according to the Polish technical requirements of WT- 2 and the extended functional testing. The conducted tests and analyses helped to determine the usefulness of the developed bituminous mixtures for use in experimental sections and confirmed the possibility of using an increased amount of reclaimed asphalt up to 50% in mixtures intended for construction of national roads.

  6. Fabrication of a Cu(InGaSe2 Thin Film Photovoltaic Absorber by Rapid Thermal Annealing of CuGa/In Precursors Coated with a Se Layer

    Directory of Open Access Journals (Sweden)

    Chun-Yao Hsu

    2013-01-01

    Full Text Available Cu(InGaSe2 (CIGS thin film absorbers are prepared using sputtering and selenization processes. The CuGa/In precursors are selenized during rapid thermal annealing (RTA, by the deposition of a Se layer on them. This work investigates the effect of the Cu content in precursors on the structural and electrical properties of the absorber. Using X-ray diffraction, field emission scanning electron microscopy, Raman spectroscopy, and Hall effect measurement, it is found that the CIGS thin films produced exhibit facetted grains and a single chalcopyrite phase with a preferred orientation along the (1 1 2 plane. A Cu-poor precursor with a Cu/( ratio of 0.75 demonstrates a higher resistance, due to an increase in the grain boundary scattering and a reduced carrier lifetime. A Cu-rich precursor with a Cu/( ratio of 1.15 exhibits an inappropriate second phase ( in the absorber. However, the precursor with a Cu/( ratio of 0.95 exhibits larger grains and lower resistance, which is suitable for its application to solar cells. The deposition of this precursor on Mo-coated soda lime glass substrate and further RTA causes the formation of a MoSe2 layer at the interface of the Mo and CIGS.

  7. Preparation and investigation of [GeSe4]100-xIx glasses as promising materials for infrared fiber sensors

    Science.gov (United States)

    Velmuzhov, A. P.; Sukhanov, M. V.; Shiryaev, V. S.; Plekhovich, A. D.; Kotereva, T. V.; Snopatin, G. E.; Gerasimenko, V. V.; Pushkin, A. A.

    2016-10-01

    The glasses of [GeSe4]100-xIx (x = 1, 3, 5, 8, 10) compositions are prepared; their thermal properties, transparency in the mid-IR range and stability against crystallization are investigated. The glass transition temperature (Tg) in this system decreases monotonically with increasing iodine content from the value of Tg = 176 °C at x = 1 to Tg = 129 °C at x = 10. It has been determined by X-ray diffraction method that the addition of iodine reduces the volume fraction of the crystalline phase in glasses after annealing at 350 °C. Using a single crucible technique, the rod of [GeSe4]95I5 glass was drawn into a single-index fiber of 300 μm diameter and 10 m length. The optical losses were 2-3 dB/m in the spectral range 2.5-8 μm; the minimum optical losses were 1.7 dB/m at a wavelength of 5.5 μm. The content of impurity hydrogen in the form of Se-H in the fiber was about 3.6 ppm(wt), impurity oxygen in the form of Ge-O is 1 ppm(wt). The possibility of use of such [GeSe4]95I5 glass single-index fiber for infrared analysis of liquids by example of crude oil and water solutions of acetone has been demonstrated.

  8. Microstructure and thermoelectric properties of CuInSe2/In2Se3 compound

    Science.gov (United States)

    Wang, Kang; Feng, Jing; Ge, Zhen-Hua; Qin, Peng; Yu, Jie

    2018-01-01

    CuInSe2 powders were synthesized by solvothermal method, and then the CuInSe2/In2Se3 bulk samples were fabricated by spark plasma sintering (SPS) technique. To investigate the phase composition, the powders were determined by X-ray diffraction (XRD). The microstructures of the powders and bulk samples were observed by scanning electron microscopy (SEM). The transportation of the electronic properties and thermal conductivity were measured at room temperature to 700 K. According to the results, the CuInSe2 powders appeared in flower-like patterns which ranged from 3 μm to 6 μm. CuInSe2 powders were synthesized at 180∘C with a chalcopyrite structure. The Seebeck coefficient increased significantly in composite thermoelectric materials up to 200μVṡK-1 at 623 K. The thermal conductivity of the sample significantly decreases from the room temperature to 700 K. The CuInSe2 bulk composite by solvothermal method achieves the highest ZT value of 0.187 at 700 K.

  9. Enhanced thermoelectric properties of N-type polycrystalline In4Se3-x compounds via thermally induced Se deficiency

    Science.gov (United States)

    Zhao, Ran; Shu, Yu-Tian; Guo, Fu

    2014-03-01

    In4Se3-x compound is considered as a potential thermoelectric material due to its comparably low thermal conductivity among all existing ones. While most studies investigated In4Se3-x thermoelectric properties by controlling selennium or other dopants concentrations, in the current study, it was found that even for a fixed initial In/Se ratio, the resulting In/Se ratio varied significantly with different thermal processing histories (i.e., melting and annealing), which also resulted in varied thermoelectric properties as well as fracture surface morphologies of In4Se3-x polycrystalline specimens. Single phase polycrystalline In4Se3-x compounds were synthesized by combining a sequence of melting, annealing, pulverizing, and spark plasma sintering. The extension of previous thermal history was observed to significantly improve the electrical conductivity (about 121%) and figure of merit (about 53%) of In4Se3-x polycrystalline compounds. The extended thermal history resulted in the increase of Se deficiency (x) from 0.39 to 0.53. This thermally induced Se deficiency was observed to associate with increasing carrier mobility but decreasing concentration, which differs from the general trend observed for the initially adjusted Se deficiency at room temperature. Unusually large dispersed grains with nanosize layers were observed in specimens with the longest thermal history. The mechanism(s) by which previous thermal processing enhances carrier mobility and affect microstructural evolution are briefly discussed.

  10. Properties of ZnO/CuInSe/sub 2/ heterojunctions

    International Nuclear Information System (INIS)

    Qiu, C.X.; Shih, I.

    1986-01-01

    Low resistivity thin films of ZnO have been prepared by an rf sputtering technique with a target containing indium. It was found that the electrical resistivity of the deposited ZnO films was dependent on the indium content in the films. The deposition method was used to form ZnO/CuInSe/sub 2/ heterojunctions on Bridgman-grown monocrystalline CuInSe/sub 2/ samples. Electrical properties of the heterojunctions have been investigated. Spectral photovoltage variation was also measured

  11. Content of arsenic, selenium, mercury in the coal, food, clay and drinking water on the Zhaotong fluorosis area, eastern Yunnan Province

    Energy Technology Data Exchange (ETDEWEB)

    Luo Kun-li; Li Hui-jie; Chen Tong-bin (and others) [Chinese Academy of Sciences, Beijing (China). Institute of Geographic Sciences and Natural Resources Research

    2008-03-15

    About 160 samples of coal, corn, capsicum and drinking water were collected from the endemic fluorosis area of Zhenxiong and Weixin County, Zhaotong City of Yunnan Province, to determine the arsenic (As), selenium (Se) and mercury (Hg) content by AAF-800. The study found that the As content in the main coal seam from the Late Permian coal mines in Zhaotong City is 8.84 mg/kg and some civil coal can reach 89.09 mg/kg. The Se and Hg in the coal samples of Late Permian is lower, but Se and Hg are more concentrated in the pyritic coal balls and the pyritic gangue of the coal seam. The As content in corn and capsicum dried by coal-burning is more than 0.7 mg/kg, the natural standard amount of arsenic content permitted in food by China. The Se and Hg content in corn dried by coal-burning is lower than the natural standard of Se and Hg content in food in China but the Se and Hg content of capsicum dried by coal-burning exceeds the amount permitted by the natural standard for food in China. Clay, used as an additive for the coal-burning process and as a binder in making briquettes, contains a high content of As, generally more than 16 mg/kg. However, the Se and Hg content of clay itself are low. The As, Se and Hg content of drinking water are lower than the natural standard of As, Se and Hg content in the drinking water. So, there is high-As content coal and high-As content dried corn and capsicum in the endemic fluorosis area of Zhaotong City of Yunnan Province. The high As content of the dried corn and capsicum might have originated from the high arsenic content of burnt coal and clay. 30 refs., 4 tabs.

  12. Inorganic/organic nanocomposites: Reaching a high filler content without increasing viscosity using core-shell structured nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Benhadjala, W., E-mail: warda.benhadjala@cea.fr [IMS Laboratory - UMR CNRS 5218, University of Bordeaux, 351 Cours de la Libération, 33405 Talence (France); CEA, LETI, Minatec Campus, 38000 Grenoble (France); Gravoueille, M.; Weiss, M. [EDF, Centre d' Expertise et d' Inspection dans les Domaines de la Réalisation et de l' Exploitation (CEIDRE), Chinon, BP 80, 37420 Avoine (France); Bord-Majek, I.; Béchou, L.; Ousten, Y. [IMS Laboratory - UMR CNRS 5218, University of Bordeaux, 351 Cours de la Libération, 33405 Talence (France); Suhir, E. [Maseeh College of Engineering and Computer Science, Portland State University, Oregon 97201 (United States); Buet, M.; Louarn, M.; Rougé, F.; Gaud, V. [Polyrise SAS, 16 Avenue Pey Berland, 33607 Pessac (France)

    2015-11-23

    Extensive research is being conducted on the development of inorganic/organic nanocomposites for a wide variety of applications in microelectronics, biotechnologies, photonics, adhesives, or optical coatings. High filler contents are usually required to fully optimize the nanocomposites properties. However, numerous studies demonstrated that traditional composite viscosity increases with increasing the filler concentration reducing therefore significantly the material processability. In this work, we synthesized inorganic/organic core-shell nanocomposites with different shell thicknesses. By reducing the shell thickness while maintaining a constant core size, the nanoparticle molecular mass decreases but the nanocomposite filler fraction is correlatively increased. We performed viscosity measurements, which clearly highlighted that intrinsic viscosity of hybrid nanoparticles decreases as the molecular mass decreases, and thus, as the filler fraction increases, as opposed to Einstein predictions about the viscosity of traditional inorganic/polymer two-phase mixtures. This exceptional behavior, modeled by Mark-Houwink-Sakurada equation, proves to be a significant breakthrough for the development of industrializable nanocomposites with high filler contents.

  13. Mercury contents in aquatic macrophytes from two reservoirs in the Paraíba do Sul: Guandú river system, SE Brazil

    Directory of Open Access Journals (Sweden)

    M. M. Molisani

    Full Text Available This paper reports on a study to determine the Hg content in the five most abundant aquatic macrophyte species (Elodea densa, Sagittaria montevidensis, Salvinia auriculata, Pistia stratiotes and Eichhornia crassipes in two artificial reservoirs flooded by water diverted from the Paraíba do Sul river, SE Brazil. The potential of these species for Hg accumulation and their role in Hg transport along the river system due to macrophyte management were evaluated. Mercury concentrations were higher in free-floating than in rooted species. Roots were also richer in Hg than were leaves. Dry weight Hg concentrations in leaves and roots from all species varied from 46-246 ng.g-1 to 37-314 ng.g-1, respectively. These values are higher than those reported for uncontaminated lakes in Brazil and in other tropical areas and similar to those reported for moderately contaminated sites. Mercury concentrations can be attributed to fluvial transport from the heavily industrialized Paraíba do Sul river basin. Intensive sampling of Pistia stratiotes from two sites in the Vigário reservoir was performed to evaluate the capacity of Hg incorporation in short periods of time. The results showed a significant negative correlation between Hg content and size class of individual plants, demonstrating the importance of juveniles, fast growing plants in absorbing Hg. The foremost impact related to Hg contents in the studied area concerns the periodic removal of macrophytes for reservoir management, followed by disposal in nearby areas. This results in the mobilization of 0.52 to 1.3 Kg of Hg per year, a significant fraction of the Hg burden present in reservoir waters. Disposal of such material may result in Hg leaching to river systems, affecting the Hg transfer throughout the basin.

  14. Antiproliferative, Cytotoxic, Antioxidant Activity and Polyphenols Contents in Leaves of Four Staphylea L. Species

    Directory of Open Access Journals (Sweden)

    Daniel Grancai

    2009-08-01

    Full Text Available Staphylea has been used for long time in Traditional Chinese Medicine (TCM and by Native Americans in a number of therapeutical indications. The present study describes in vitro antiproliferative, cytotoxic properties (MTT and LDH test and antioxidant activities (reduction of DPPH radical and peroxynitrite radical of Staphylea colchica Stev. (SC, S. elegans Zab. (SC, S. holocarpa Hemsl. (SH and S. pinnata L. (SP leave water extracts. Time- (24 and 72 h and dose- (1-150 μg/mL dependent effects of the above extracts were tested at the mitochondrial (MTT test and plasma membrane level (LDH leakage in A431 human skin carcinoma cells. Screening of these properties has shown time and dose dependent increase of harmful effects, the highest activity was observed for the SE, while the less active was the SH extract. The ED50 values for the mitochondrial and membrane damage were nearly identical for the SE and very similar for SH extract. These findings indicate simultaneous injury of both cell compartments by SE and SH extracts. The highest antioxidant potential of SE species is accompanied by the highest content of flavones/flavonols and polyphenols. Only flavonoid contents are associated with antiproliferative effects and cell membrane injury, while antioxidant properties are the result of polyphenol content. The data clearly demonstrate that individual Staphylea L. species differ, not only in the amount of biologically active compounds, but also by the extent of harmful and beneficial effects.

  15. Hopping conduction in gamma-irradiated InSe and InSe:Sn single crystals

    International Nuclear Information System (INIS)

    MUSTAFAEVA, S.N.; ISMAILOV, A.A.; ASADOV, M.M.

    2010-01-01

    Full text : The semiconductive InSe layer compound is characterized by a strong covalent bond inside the layers and a weak Van der Waals bonding between them. It was shown that across the layers of InSe single crystals at low temperatures (T ≤ 200 K) at direct current (dc) hopping conduction through localized states near the Fermi level takes place. The results of dc-conductivity of gamma-irradiated p-InSe and n-InSe : Sn layer single crystals have been presented in this work. ρ-InSe single crystal specimens grown by the Bridgman method were used in the experiments. Plates of the crystals under study were obtained by cleaving along the layers of single crystal ingots. The single-crystal InSe samples for electric measurements had the form of planar capacitors normal to the C axis of the crystals, with silver-paste electrodes. The thickness of the InSe samples was 300 mkm. Co 60 serves as the source of irradiation with energy of gamma-quantum equal to 1.3 MeV. The electric properties of non-irradiated and gamma-irradiated InSe crystals were measured under the same conditions. It is revealed that InSe and InSe : Sn (0.2 and 0.4 mole percent Sn) single crystals exhibit a variable range hopping conduction along a normal to their natural layers at temperatures T≤200 K in a dc electric field. From experimental data the parameters of localized states of p-InSe and n-InSe : Sn were calculated before and after gamma-irradiation. It is revealed that gamma-irradiation of p-InSe and n-InSe : Sn (0.2 and 0.4 mole percent Sn) single crystals leads to significant change of localized states parameters. After gamma-irradiation the density of states near the Fermi level increased, but their energy spread and the average jump distance decreased. The concentrations of radiated defects were estimated in p-InSe (5.18*10 1 7 sm - 3) and n-InSe : Sn (2.5*10 1 7 - 2.7*10 1 8 sm - 3) single crystals. The present results demonstrate that gamma-irradiation offers the possibility of tuning

  16. The possibilities of increasing lignan content in food

    Directory of Open Access Journals (Sweden)

    Jana Kulichová

    2016-12-01

    Full Text Available Lignans are bioactive substances which belong to polyphenols. This compounds can be found in plants including coniferous trees. Lignans are secondary plant metabolites with wide range of biological effects, such as antimicrobial, antivirus or anticancer. They also serve as antioxidants and are naturally occurring compounds which are found in food rich in fibre. There are more than 200 lignans that originate from more than 70 plant families. They can be found in all parts of the plant, mainly in seeds. Almost 37% of total lignan intake in human diet comes from drinking tea and coffee. Fruit and vegetable contain only about 1% of lignans, but they are also significant source of lignans because they are consumed in higher amounts than seeds. 7-hydroxymatairesinol is the main representative of lignans. It is white powder with great health benefits and it is present in the knots of coniferous trees, especially in knots of spruce. Lignans were extracted from the knots and used for fortifying fruit and vegetable spreads. Subsequently, the fortified products became subject to sensory analysis, their antioxidant capacity was measured by the FRAP method, total polyphenols content was found and lignan content determined using the HPLC method. The aim was enriching commonly consumed foods by healthy lignans to avoid negative effects on the sensory quality of these products by the bitter taste of the lignan extract. Of the tested foods, plum jam and red pepper paste are the best options as they best block the bitter taste of lignans. There was a positive increase in antioxidant capacity in food products fortified by the lignan extract. For plum jam, strawberry jam, strawberry spread and red pepper paste, the more lignans were added to the products, the greater was the level of antioxidant capacity. The highest antioxidant capacity was reached in samples with the added amount of 340 mg of lignan per kg of product. As with the antioxidant capacity, total

  17. Increasing Vitamin C Content in Plant Foods to Improve Their Nutritional Value—Successes and Challenges

    Directory of Open Access Journals (Sweden)

    Daniel R. Gallie

    2013-08-01

    Full Text Available Vitamin C serves as a cofactor in the synthesis of collagen needed to support cardiovascular function, maintenance of cartilage, bones, and teeth, as well as being required in wound healing. Although vitamin C is essential, humans are one of the few mammalian species unable to synthesize the vitamin and must obtain it through dietary sources. Only low levels of the vitamin are required to prevent scurvy but subclinical vitamin C deficiency can cause less obvious symptoms such as cardiovascular impairment. Up to a third of the adult population in the U.S. obtains less than the recommended amount of vitamin C from dietary sources of which plant-based foods constitute the major source. Consequently, strategies to increase vitamin C content in plants have been developed over the last decade and include increasing its synthesis as well as its recycling, i.e., the reduction of the oxidized form of ascorbic acid that is produced in reactions back into its reduced form. Increasing vitamin C levels in plants, however, is not without consequences. This review provides an overview of the approaches used to increase vitamin C content in plants and the successes achieved. Also discussed are some of the potential limitations of increasing vitamin C and how these may be overcome.

  18. Increasing vitamin C content in plant foods to improve their nutritional value-successes and challenges.

    Science.gov (United States)

    Gallie, Daniel R

    2013-08-30

    Vitamin C serves as a cofactor in the synthesis of collagen needed to support cardiovascular function, maintenance of cartilage, bones, and teeth, as well as being required in wound healing. Although vitamin C is essential, humans are one of the few mammalian species unable to synthesize the vitamin and must obtain it through dietary sources. Only low levels of the vitamin are required to prevent scurvy but subclinical vitamin C deficiency can cause less obvious symptoms such as cardiovascular impairment. Up to a third of the adult population in the U.S. obtains less than the recommended amount of vitamin C from dietary sources of which plant-based foods constitute the major source. Consequently, strategies to increase vitamin C content in plants have been developed over the last decade and include increasing its synthesis as well as its recycling, i.e., the reduction of the oxidized form of ascorbic acid that is produced in reactions back into its reduced form. Increasing vitamin C levels in plants, however, is not without consequences. This review provides an overview of the approaches used to increase vitamin C content in plants and the successes achieved. Also discussed are some of the potential limitations of increasing vitamin C and how these may be overcome.

  19. Real-time in-situ monitoring of the topotactic transformation of TlCu3Se2 into TlCu2Se2

    International Nuclear Information System (INIS)

    Ångström, J.; Sahlberg, M.; Berger, R.

    2015-01-01

    Highlights: • Topotactic transition from TlCu 3 Se 2 to TlCu 2 Se 2 followed in situ. • Synchrotron radiation X-ray powder diffraction enabled short scans. • Relative abundance of phases refined from powder data. • Opens up for studying similar systems in the same manner. - Abstract: The solid state transformation of monoclinic TlCu 3 Se 2 into tetragonal TlCu 2 Se 2 by oxidative copper leaching in concentrated ammonia solution has been studied in situ by the use of synchrotron radiation. The diffraction patterns of parent and daughter phase are both sharp, indicating a strong topotactic relationship between them that effectuates a rapid change by “chimie douce” performed at +19 °C. The transformation rate is strongly connected to the access of oxygen from the surrounding air. The transformation was followed in a real-time mode, being almost complete after 2.5 h with 1 h incubation due to low oxygen content, as shown from refining the diffraction patterns by Rietveld profile technique

  20. Content curation en periodismo (y en documentación periodística

    Directory of Open Access Journals (Sweden)

    Javier Guallar

    2014-05-01

    Full Text Available Desde hace unos pocos años están con nosotros los conceptos de content curation y de content curator como actividad o sistema y como profesional o especialista, respectivamente. Aunque el origen del término se vincule al mundo del marketing –se considera como artículo fundacional “Manifesto for the content curator” del marketer Rohit Bhargava (2009-, y sus características se identifiquen en buena medida con las del profesional de la Información y la Documentación, la content curation va más allá de una disciplina concreta o de un rol profesional determinado. Ambos perfiles citados, marketers y bibliotecarios-documentalistas, pueden hacer content curation por supuesto, pero también otros, como educadores, por ejemplo. Y, como es el caso que tratamos aquí, periodistas (y documentalistas de prensa. Porque en estas breves líneas nos vamos a centrar en presentar el papel de la content curation en el ámbito del periodismo.

  1. Interaction of Se and GaSe with Si(111)

    International Nuclear Information System (INIS)

    Meng, Shuang; Schroeder, B. R.; Olmstead, Marjorie A.

    2000-01-01

    Deposition of Se and GaSe on Si(111)7x7 surfaces was studied with low-energy electron diffraction, x-ray photoelectron spectroscopy, and x-ray photoelectron diffraction to probe initial nucleation and interface structure for GaSe/Si(111) heteroepitaxy. Room-temperature deposition of Se on Si(111)7x7 results in an amorphous film. Subsequent annealing leads to Se evaporation without ordering or interdiffusion. Se deposition at 450 degree sign C saturates at submonolayer coverage with no diffusion of Se into the substrate. There is no clear evidence of ordered sites for the Se. Growth of GaSe on Si(111)7x7 above 500 degree sign C results in a pseudomorphic bilayer, with Si-Ga-Se bonding. Additional GaSe does not stick to the bilayer above 525 degree sign C. The resulting Se lone pair at the surface leads to an ideally passivated surface similar to As/Si(111). This stable surface is similar to the layer termination in bulk GaSe. The single domain bilayer is oriented with the Ga-Se bond parallel to the substrate Si-Si bond. (c) 2000 The American Physical Society

  2. Estimation of hydraulic conductivity on clay content in soil determined from resistivity data

    Energy Technology Data Exchange (ETDEWEB)

    Shevnin, Vladimir; Delgado-Rodriguez, Omar; Mousatov, Aleksandr [Mexican Petroleum Institute, Mexico, D.F. (Mexico); Ryjov, Albert [Moscow State Geological Prospecting Academy, Geophysical Faculty, Moscow (Russian Federation)

    2006-07-15

    The influence of clay content in sandy and clayey soils on hydraulic conductivity (filtration coefficient) is considered. A review of published experimental data on the relationship of hydraulic conductivity with soil lithology and grain size, as dependent on clay content is presented. Theoretical calculations include clay content. Experimental and calculated data agree, and several approximation formulas for filtration coefficient vs clay content are presented. Clay content in soil is estimated from electric resistivity data obtained from 2D VES interpretation. A two-step method is proposed, the first step including clay content calculating from soil resistivity and groundwater salinity, and the second step including filtration coefficient estimating from clay content. Two applications are presented. [Spanish] El contenido de arcilla en suelos areno-arcillosos influye sobre la permeabilidad hidraulica (coeficiente de filtracion). Se presenta una revision de datos experimentales publicados que relacionan el coeficiente de filtracion con el tipo litologico del suelo y el tamano de las particulas. A partir de calculos teoricos, se modifican las conocidas formulas que relacionan el coeficiente de filtracion con el contenido de arcilla. Se estima el contenido de arcilla a partir de los datos interpretados por el metodo SEV, y se propone un procedimiento para la estimacion del coeficiente de filtracion: (a) calculo del contenido de arcilla a partir de la resistividad del suelo y de la salinidad del agua subterranea, (b) estimacion del coeficiente de filtracion a partir del contenido de arcilla. Se presentan algunos ejemplos de la aplicacion de esta metodologia.

  3. Growth and characterization of LiInSe2 single crystals

    Science.gov (United States)

    Ma, Tianhui; Zhu, Chongqiang; Lei, Zuotao; Yang, Chunhui; Sun, Liang; Zhang, Hongchen

    2015-04-01

    Large and crack-free LiInSe2 single crystals were obtained by the vertical gradient freezing method with adding a temperature oscillation technology in a two-zone furnace. X-ray diffraction data showed that the pure LiInSe2 compound was synthesized. The grown crystals had different color depending on melt composition. The atomic ratios of elements of LiInSe2 crystals were obtained by an Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES), and the structural formula were calculated according to the relative contents of elements. The average absorption coefficients were estimated by using average reflection indices. The absorption coefficients of the thermal annealing samples are 0.6 cm-1 at 2-3 μm. The transparent range of our LiInSe2 crystals is from 0.6 μm to 13.5 μm.

  4. Acute isoproterenol induces anxiety-like behavior in rats and increases plasma content of extracellular vesicles.

    Science.gov (United States)

    Leo, Giuseppina; Guescini, Michele; Genedani, Susanna; Stocchi, Vilberto; Carone, Chiara; Filaferro, Monica; Sisti, Davide; Marcoli, Manuela; Maura, Guido; Cortelli, Pietro; Guidolin, Diego; Fuxe, Kjell; Agnati, Luigi Francesco

    2015-04-01

    Several clinical observations have demonstrated a link between heart rate and anxiety or panic disorders. In these patients, β-adrenergic receptor function was altered. This prompted us to investigate whether the β-adrenergic receptor agonist isoproterenol, at a dose that stimulates peripheral β-adrenergic system but has no effects at the central nervous system, can induce anxiety-like behavior in rats. Moreover, some possible messengers involved in the peripheral to brain communication were investigated. Our results showed that isoproterenol (5 mg kg(-1) i.p.) increased heart rate, evoked anxiety-like behavior, did not result in motor impairments and increased extracellular vesicle content in the blood. Plasma corticosterone level was unmodified as well as vesicular Hsp70 content. Vesicular miR-208 was also unmodified indicating a source of increased extracellular vesicles different from cardiomyocytes. We can hypothesize that peripheral extracellular vesicles might contribute to the β-adrenergic receptor-evoked anxiety-like behavior, acting as peripheral signals in modulating the mental state. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Effect of compositional dependence on physical and optical parameters of Te{sub 17}Se{sub 83−x}Bi{sub x} glassy system

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Pankaj, E-mail: pks_phy@yahoo.co.in [Department of Physics and Materials Science, Jaypee University of Information Technology, Waknaghat, Solan, HP 173234 (India); El-Bana, M.S.; Fouad, S.S. [Nano-Science and Semiconductor Laboratories, Department of Physics, Faculty of Education, Ain Shams University, Cairo (Egypt); Sharma, Vineet [Department of Physics and Materials Science, Jaypee University of Information Technology, Waknaghat, Solan, HP 173234 (India)

    2016-05-15

    In the present paper we have studied the effect of Bi addition on the physical and optical properties of thermally evaporated Te{sub 17}Se{sub 83−x}Bi{sub x} thin films. With Bi addition the density, mean coordination number, mechanical constraints, glass transition temperature increases. The other parameters theoretical energy gap, lone pair electron, deviation from stoichiometry decreases. Transmission spectra have been taken in the spectral range 400 nm–2500 nm using ultraviolet–visible–near infrared spectrophotometer. The fundamental absorption edge shifts towards longer wavelength with Bi incorporation. Optical energy gap and linear refractive index have been determined using transmission spectra. A good correlation has been drawn between the optical and theoretical parameters. Using linear optical parameters, the nonlinear optical susceptibility and nonlinear refractive index have been estimated. - Highlights: • Physical and optical parameters have been analyzed for Te{sub 17}Se{sub 83−x}Bi{sub x} glassy alloys. • The addition of Bi leads to decrease of average heat of atomization and cohesive energy. • The optical band gap decreases with increasing Bi content. • The third order susceptibility and nonlinear refractive index show an increase with increase in the Bi content.

  6. Increased Cerebral Water Content in Hemodialysis Patients

    OpenAIRE

    Reetz, Kathrin; Abbas, Zaheer; Eitner, Frank; Gross, Theresa; Schulz, Jörg Bernhard; Floege, Jürgen; Shah, N. J.; Costa, Ana Sofia; Gras, Vincent; Tiffin-Richards, Frances; Mirzazade, Shahram; Holschbach, Bernhard; Frank, Rolf Dario; Vassiliadou, Athina; Krüger, Thilo

    2015-01-01

    Little information is available on the impact of hemodialysis on cerebral water homeostasis and its distribution in chronic kidney disease. We used a neuropsychological test battery, structural magnetic resonance imaging (MRI) and a novel technique for quantitative measurement of localized water content using 3T MRI to investigate ten hemodialysis patients (HD) on a dialysis-free day and after hemodialysis (2.4±2.2 hours), and a matched healthy control group with the same time interval. Neuro...

  7. Exploring the fungal protein cadre in the biosynthesis of PbSe quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Jaya Mary; Sharma, Sumit; Balakrishnan, Raj Mohan, E-mail: rajmohanbala@gmail.com

    2017-02-15

    Highlights: • Pb and Se stress activates specific metal detoxification surge in the fungus. • Fungus releases phytochelatins, metallothioneins, super oxide dismutases etc. • These mechanisms capacitate the fungi as bio-factories for synthesis of PbSe QDs. • A pathway for PbSe QD biosynthesis by marine Aspergillus terreus was elucidated - Abstract: While a large number of microbial sources have recently emerged as potent sources for biosynthesis of chalcogenide quantum dots (QDs), studies regarding their biomimetic strategies that initiate QD biosynthesis are scarce. The present study describes several mechanistic aspects of PbSe QD biosynthesis using marine Aspergillus terreus. Scanning electron microscopic (SEM) studies indicated distinctive morphological features such as abrasion and agglomeration on the fungal biomass after the biosynthesis reaction. Further, the biomass subsequent to the heavy metal/metalloid precursor was characterized with spectral signatures typical to primary and secondary stress factors such as thiol compounds and oxalic acid using Fourier Transform Infra-Red Spectroscopic (FTIR) analysis. An increase in the total protein content in the reaction mixture after biosynthesis was another noteworthy observation. Further, metal-phytochelatins were identified as the prominent metal-ion trafficking components in the reaction mixture using Liquid Chromatography Mass Spectroscopic analysis (LCMS). Subsequent assays confirmed the involvement of metal binding peptides namely metallothioneins and other anti-oxidant enzymes that might have played a prominent role in the microbial metal detoxification system for the biosynthesis of PbSe QDs. Based on these findings a possible mechanism for the biosynthesis of PbSe QDs by marine A. terreus has been elucidated.

  8. Thermoelectric study of Ag doped SnSe-Sb2Se3 based alloy

    Science.gov (United States)

    Das, Anish; Talukdar, M.; Kumar, Aparabal; Sarkar, Kalyan Jyoti; Dhama, P.; Banerji, P.

    2018-05-01

    In this article we have synthesized p-type alloy of SnSe and Sb2Se3 (10 atomic %) to study the thermoelectric transport properties. The alloy was prepared by melt grown technique followed by spark plasma sintering and latter doped with 2 atomic % Ag to compensate the carrier density in order to achieve higher electrical conductivity (σ). Out of these, the doped sample resulted in the maximum figure of merit, ZT˜0.7 at 773 K due to the existence of the secondary phase AgSbSe2 and reduced lattice thermal conductivity (0.61 W m-1 K-1 at 300 K). The fitted lattice thermal conductivity shows that point defect and Umklapp scattering are the primary process of phonon scattering for all the samples whereas the fitted mobility data confirms acoustic phonon scattering along with point defect and grain boundary scattering to be the main carrier scattering mechanism. More over room temperature carrier density and electrical conductivity are found to increase for the doped sample which further corroborate (90%)SnSe-(10%)Sb2Se3:2%Ag to be a potential candidate for highly efficient thermoelectric materials.

  9. Clearance of 99mTc-DTPA and experimentally increased alveolar surfactant content

    International Nuclear Information System (INIS)

    Bos, J.A.H.; Wollmer, P.; Bakker, W.; Hannappel, E.; Lachmann, B.

    1992-01-01

    The authors measured clearance of 99m Tc-labeled diethylenetriamine pentaacetic acid ( 99m Tc-DTPA) in rabbits with experimentally increased alveolar surfactant content. In one group of animals, surfactant production was increased by treatment with ambroxol, and another group of animals was treated with tracheal instillation of natural surfactant. A group of untreated control animals and animals treated with instillation of saline were also studied. Clearance was measured during standard conditions of mechanical ventilation and during ventilation with large tidal volumes. In ambroxol- and surfactant-treated groups, clearance rate was reduced compared with untreated control animals. In contrast, clearance rate increased after saline instillation. The differences were observed at both modes of ventilation. The findings indicate that the pulmonary surfactant system is a rate-limiting factor for the clearance of 99m Tc-DTPA and that the volume dependence of clearance is not explained by stretching of the alveolar wall only. 28 refs., 2 figs., 1 tab

  10. Increasing the amylose content of durum wheat through silencing of the SBEIIa genes

    Directory of Open Access Journals (Sweden)

    Masci Stefania

    2010-07-01

    Full Text Available Abstract Background High amylose starch has attracted particular interest because of its correlation with the amount of Resistant Starch (RS in food. RS plays a role similar to fibre with beneficial effects for human health, providing protection from several diseases such as colon cancer, diabetes, obesity, osteoporosis and cardiovascular diseases. Amylose content can be modified by a targeted manipulation of the starch biosynthetic pathway. In particular, the inactivation of the enzymes involved in amylopectin synthesis can lead to the increase of amylose content. In this work, genes encoding starch branching enzymes of class II (SBEIIa were silenced using the RNA interference (RNAi technique in two cultivars of durum wheat, using two different methods of transformation (biolistic and Agrobacterium. Expression of RNAi transcripts was targeted to the seed endosperm using a tissue-specific promoter. Results Amylose content was markedly increased in the durum wheat transgenic lines exhibiting SBEIIa gene silencing. Moreover the starch granules in these lines were deformed, possessing an irregular and deflated shape and being smaller than those present in the untransformed controls. Two novel granule bound proteins, identified by SDS-PAGE in SBEIIa RNAi lines, were investigated by mass spectrometry and shown to have strong homologies to the waxy proteins. RVA analysis showed new pasting properties associated with high amylose lines in comparison with untransformed controls. Finally, pleiotropic effects on other starch genes were found by semi-quantitative and Real-Time reverse transcription-polymerase chain reaction (RT-PCR. Conclusion We have found that the silencing of SBEIIa genes in durum wheat causes obvious alterations in granule morphology and starch composition, leading to high amylose wheat. Results obtained with two different methods of transformation and in two durum wheat cultivars were comparable.

  11. Effect of Se addition on optical and electrical properties of chalcogenide CdSSe thin films

    Science.gov (United States)

    Hassanien, A. S.; Akl, Alaa A.

    2016-01-01

    Compositional dependence of optical and electrical properties of chalcogenide CdSxSe1-x (0.4 ≥ x ≥ 0.0 at. %) thin films was studied. Cadmium sulphoselenide films were deposited by thermal evaporation technique at vacuum (8.2 × 10-4 Pa) onto preheated glass substrates (523 K). The evaporation rate and film thickness were kept constant at 2.50 nm/s and 375 ± 5 nm, respectively. X-ray diffractograms showed that, the deposited films have the low crystalline nature. Energy dispersive analysis by X-ray (EDAX) was used to check the compositional elements of deposited films. The absorption coefficient was determined from transmission and reflection measurements at room temperature in the wavelength range 300-2500 nm. Optical density, skin depth, optical energy gap and Urbach's parameters of CdSSe thin films have also been estimated. The direct optical energy gap decreased from 2.248 eV to 1.749 eV when the ratio of Se-content was increased from 0.60 to 1.00 . Conduction band and valance band positions were evaluated. The temperature dependence of dc-electrical resistivity in the temperature range (293-450 K) has been reported. Three conduction regions due to different conduction mechanisms were detected. Electrical sheet resistance, activation energy and pre-exponential parameters were discussed. The estimated values of optical and electrical parameters were strongly dependent upon the Se-content in CdSSe matrix.

  12. Die tema van God se spraak in Hebreërs se inleidingsformules

    Directory of Open Access Journals (Sweden)

    Albert J. Coetsee

    2015-03-01

    Full Text Available Alhoewel die voorkoms en gebruik van die Ou Testament in die meeste navorsing oor Hebreërs besonder baie aandag geniet, is dit nie die geval met die Hebreërskrywer se gebruik van inleidingsformules vir sy Ou-Testamentiese aanhalings nie. Die gevolg is dat daar tot op hede betreklik min selfstandige navorsing oor die Hebreërskrywer se tema van God se spraak by sy inleidingsformules gedoen is. In hierdie artikel word Hebreërs se inleidingsformules in besonderhede nagegaan om te bepaal wat die aard en inhoud van die Hebreërskrywer se verwysings na die tema van God se spraak in sy inleidingsformules is. Daar word onder andere bepaal dat Hebreërs 38 direkte aanhalings vanuit die Ou Testament bevat, dat die Hebreërskrywer, met slegs een uitsondering, elke inleidingsformule met ’n werkwoord van sêinlei, dat ’n Persoon van die Drie-eenheid in 34 van die 38 direkte aanhalings (± 89% die onderwerp en gevolglike Spreker van die Ou-Testamentiese woorde is, dat die Hebreërskrywer al drie Persone van die Drie-eenheid as God beskou, en dat die Hebreërskrywer oortuig is dat die Ou Testament geïnspireer is en God se geldige en relevante openbaring bly. The theme of God’s speech in Hebrews’ introduction formulae. Whilst the occurance and function of the Old Testament in research on Hebrews enjoys a lot of attention, this is not the case for the writer of Hebrews’ use of introduction formulae for his Old Testament quotations. The result is that up to date relatively few independent studies have been made on the writer of Hebrews’ theme of God’s speech in his introduction formulae. In this article the introduction formulae in Hebrews are researched in detail to determine the nature and content of the writer of Hebrews’ reference to the theme of God’s speech in his introduction formulae. Amongst other things it is determined that Hebrews has 38 direct quotations from the Old Testament, that with the exception of one

  13. (p-ClPhSe)2 stimulates carbohydrate metabolism and reverses the metabolic alterations induced by high fructose load in rats.

    Science.gov (United States)

    Quines, Caroline B; Rosa, Suzan G; Chagas, Pietro M; Velasquez, Daniela; Prado, Vinicius C; Nogueira, Cristina W

    2017-09-01

    The modern life leads to excess consumption of food rich in fructose; however, the long-term changes in carbohydrate and lipid metabolism could lead to metabolic dysfunction in humans. The present study evaluated the in vitro insulin-mimetic action of p-chloro-diphenyl diselenide (p-ClPhSe) 2 . The second aim of this study was to investigate if (p-ClPhSe) 2 reverses metabolic dysfunction induced by fructose load in Wistar rats. The insulin-mimetic action of (p-ClPhSe) 2  at concentrations of 50 and 100 μM was determined in slices of rat skeletal muscle. (p-ClPhSe) 2  at a concentration of 50 μM stimulated the glucose uptake by 40% in skeletal muscle. A dose-response curve revealed that (p-ClPhSe) 2  at a dose of 25 mg/kg reduced (∼20%) glycemia in rats treated with fructose (5 g/kg, i.g.). The administration of fructose impaired the liver homeostasis and (p-ClPhSe) 2 (25 mg/kg) protected against the increase (∼25%) in the G-6-Pase and isocitrate dehydrogenase activities and reduced the triglyceride content (∼25%) in the liver. (p-ClPhSe) 2 regulated the liver homeostasis by stimulating hexokinase activity (∼27%), regulating the TCA cycle activity (increased the ATP and citrate synthase activity (∼15%)) and increasing the glycogen levels (∼67%). In conclusion, (p-ClPhSe) 2 stimulated carbohydrate metabolism and reversed metabolic dysfunction in rats fed with fructose. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Increase of (CdSe/ZnS)Cys quantum dot luminescence intensity in the presence of TPPS{sub 4} porphyrin

    Energy Technology Data Exchange (ETDEWEB)

    Parra, Gustavo G.; Borissevitch, Iouri E. [Universidade de Sao Paulo (FFCLRP/USP), Ribeirao Preto, SP (Brazil). Fac. de Filosofia, Ciencias e Letras de Ribeirao Preto. Dept. de Fisica; Kuzmin, Vladimir A. [Emanuel Institute of Biophysical Chemistry, RAS-RU, Moscow (Russian Federation); Oleinikov, Vladimir A. [Shemyakin and Ovchinnikov Institute of Biooganic Cemistry, RAS-RU, Moscow (Russian Federation)

    2012-07-01

    Full text: Nanocrystal semiconductor particles or Quantum Dots (QD) possess extraordinary photophysical characteristics, such as extreme high fluorescence quantum yield and optical absorption and very narrow fluorescence band, which can be easily shifted by changing of QD particle size. Due to these characteristics, QD is promising for fluorescence cancer diagnostics and photodynamic treatment. The efficiency of these processes can be in- creased by energy transfer between QD and classic fluorescence probes and photosensitizers (PS). In this work we present on the study of the increase of (CdSe/ZnS)Cys quantum dot luminescence intensity, stimulated by interaction with TPPS{sub 4} porphyrin. The optical absorption and steady-state and time-resolved fluorescence techniques were employed. Water soluble QD (CdSe/ZnS) with emission at 580 nm, functionalized with cysteine (Cys), were studied. TPPS{sub 4} porphyrin was used as a stimulator of QD luminescence. All experiments were realized in PBS buffer (pH 7.3; 7.5 mM) in Milli-Q quality water. The TPPS{sub 4} adding into the QD solutions until the 5{mu}M concentration produced an increase in QD luminescence intensity and lifetime, while for TPPS{sub 4} concentrations higher than 20{mu}M the reduction of the fluorescence intensity was observed, the emission spectra and fluorescence decays profile being unchanged. This effect can not be due to the electrostatic interaction between (CdSe/ZnS)Cys and TPPS{sub 4} because both, (CdSe/ZnS)Cys and TPPS{sub 4}, are negatively charged. We suppose that TPPS{sub 4} porphyrin interacts directly with QD (ZnS) shell, reducing the dangling bound number. This reduction decreases, in turn, the probability of nonradiative ways of the excitation energy dissipation. When the majority of dangling bound is occupied by the TPPS{sub 4} molecules, the effect of QD luminescence reduction (quenching) by porphyrin predominates, probably, via the energy transfer from QD to TPPS{sub 4}. However

  15. Aluminum doping of CuInSe{sub 2} synthesized by solution process and its effect on structure, morphology, and bandgap tuning

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Zhi; Deng, Weizhi; Zhang, Xia; Yuan, Qian; Deng, Peiran; Sun, Lei [Material Engineering College, Shanghai University of Engineering Science (China); Liang, Jun [School of Advanced Materials, Peking University Shenzhen Graduate School, Shenzhen University Town (China)

    2014-11-15

    Al-doped CuInSe{sub 2} material is prepared by a low-cost wet chemical process. The key properties of Al-doped CuInSe{sub 2} as a successful solar cell material are investigated, such as crystal structure, morphology, optical properties, and bandgap. In situ X-ray diffraction measurements indicate that the doping of Al has induced noticeable lattice distortion. The material shows excellent thermal stability up to 600 C annealing temperature. By increasing the Al-doping concentration, the crystal unit-cell parameter of the material becomes smaller and the change of crystal structure leads to an increase of the grain size and surface roughness. The bandgap of Al-doped CuInSe{sub 2} can be continuously tuned in a range of 1.07-1.67 eV as Al/(Al + In) content ratio varies from 0 to 0.49. Finally, the effect mechanism on the properties of CuInSe{sub 2} after Al doping is discussed based on the ionic radius, crystal structure, and bonding state. (copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. PbSe Quantum Well VECSEL on Si

    Science.gov (United States)

    Fill, M.; Khiar, A.; Rahim, M.; Felder, F.; Zogg, H.

    2011-12-01

    Vertical external cavity surface emitting lasers in the wavelength region from 3-5 μm are presented. They are based on PbSe quantum wells grown on Si substrates. As host material Pb1-xEuxSe and Pb1-xSrxSe are used. With Pb1-xSrxSe as host material maximum operation temperatures of 325 K are achieved, while with Pb1-xEuxSe an operation temperature of 245 K could not be overcome. This may be explained by a band alignment transition from type I to type II with increasing temperature.

  17. Increasing Provasculature Complexity in the Arabidopsis Embryo May Increase Total Iron Content in Seeds: A Hypothesis

    Directory of Open Access Journals (Sweden)

    Hannetz Roschzttardtz

    2017-06-01

    Full Text Available Anemia due to iron deficiency is a worldwide issue, affecting mainly children and women. Seed iron is a major source of this micronutrient for feeding, however, in most crops these levels are too low to meet daily needs. Thus, increasing iron allocation and its storage in seeds can represent an important step to enhance iron provision for humans and animals. Our knowledge on seed iron homeostasis is mainly based on studies performed in the model plant Arabidopsis thaliana, where iron accumulates in endodermis cells surrounding the embryo provasculature. It has been reported that cotyledon provasculature pattern complexity can be modified, thus we hypothesize that changes in the complexity of embryo vein patterns may affect total iron content in Arabidopsis seeds. This approach could be used as basis to develop strategies aimed to biofortify seeds.

  18. Can an increase in celiac disease be attributed to an increase in the gluten content of wheat as a consequence of wheat breading? A perspective

    Science.gov (United States)

    In order to assess the possibility that wheat breeding has been responsible for an increase in the gluten content of U.S. wheat cultivars and thereby responsible for an increase in the incidence of celiac disease, the available data from the 20th century has been analyzed. Although much of the infor...

  19. Induction of mutation for increased sulfur content in the CFI strain of yeast by gamma-irradiation

    International Nuclear Information System (INIS)

    Faustino, C.C.

    1977-08-01

    From all current source of protein concentration the food yeast offers the greatest potential for development. Yeast protein is a good source of lysine and has adeqouate acounts of other essential amino acids such as trytophan and threonine, however, it was found to be relatively poor in the sulfur-containing amino acids which limits its nutrient value. A lasting remedy is genetic modification of the microorganisms to produce protein with a better amino acid balance. Gamma radiation from Co-60 was tried in these experiments being reported to induce mutations in the new CFI strain. A way of screening for increased sulfur content was devised. These are; 1) Incorporation of (NH 4 ) 2 35 S0 4 into the yeast cells; 2) Autoradiography; and 3) Quantitative determination of S-incorporation in submerse cultures of yeasts by use of a liquid scintillation counter. About seven hundred individual colonies were carefully and meticulously autQradiographically screened for high-S0 4 incorporation. Based on the results of autoradiography, 7.8% (50 strains) of the whole population were considered high in 35 S0 4 incorporation. The 50 yeast strains selected by autoradiography to be high in S0 4 incorporation were analyzed with the use of a liquid scintillation counter. From the data gathered, 29 mutants were se--lected. The data from these 29 mutants are presented in tabulated form. Only yeast strains no. 1, 42, 44, 47, 4, 3, 49, 50, 2 and 39 appear to show any promise as putative high-S mutants

  20. Glass forming tendencies of chalcogenides of the system (As2Se3)sub(1-x):(T12Se)sub(x)

    International Nuclear Information System (INIS)

    Majid, C.A.

    1982-07-01

    In this paper glass forming capabilities of chalcogenide glasses based on As 2 Se 3 with T1 2 Se concentrations are discussed. The studies were made using the differential thermal analysis (DTA) technique. These studies show that the glass forming tendency of As 2 Se 3 decreases as the concentrations of T1 2 Se molecules are increased. Also these studies show that with addition of T1 2 Se, the glass transition temperature Tsub(g) of As 2 Se 3 decreases, suggesting a tendency for weaker bonding and hence less stability of T1-rich compositions. (author)

  1. Extended analyses of Se VII and Se VIII

    International Nuclear Information System (INIS)

    Vankleef, Th.A.M.; Joshi, Y.N.

    1984-01-01

    Joshi et al. (1984) have conducted an analysis of the 3d8 4s-3d8 4p transitions in As VII. The present investigation is concerned with an analysis of similar transitions in Se VIII. The selenium spectrum was photographed in the 400-1200-A wavelength region on a variety of normal-incidence spectrographs. Attention is given to least-squares-fit (LSF) and Hartree-Fock (HF) parameter values for the 3d9 4d configuration of Se VII, LSF and HF parameter values for the 3d8 4s and 3d8 4p configurations of Se VIII, the energy and composition of the levels of the 3d9 4d configuration of Se VII, classified lines in Se VII, energy levels and composition of the 3d8 4s configuration and the revised and newly determined levels of the 3d8 4p configuration of Se VIII, and newly classified lines of Se VIII. 15 references

  2. Ab initio phonon thermal transport in monolayer InSe, GaSe, GaS, and alloys

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, Tribhuwan; Parker, David S.; Lindsay, Lucas

    2017-10-17

    We compare vibrational properties and phonon thermal conductivities (κ) of monolayer InSe, GaSe and GaS systems using density functional theory and Peierls-Boltzmann transport methods. In going from InSe to GaSe to GaS, system mass decreases giving both increasing acoustic phonon velocities and decreasing scattering of these heat-carrying modes with optic phonons, ultimately giving κInSe< κGaSe< κGaS. This behavior is demonstrated by correlating the scattering phase space limited by fundamental conservation conditions with mode scattering rates and phonon dispersions for each material. We also show that, unlike flat monolayer systems such as graphene, thermal transport is governed by in-plane vibrations in InSe, GaSe and GaS, similar to buckled monolayer materials such as silicene. Alloying of InSe, GaSe and GaS systems provides an effective method for modulating their κ through intrinsic vibrational modifications and phonon scattering from mass disorder giving reductions ~2-3.5 times. This disorder also suppresses phonon mean free paths in the alloy systems compared to those in their crystalline counterparts. This work provides fundamental insights of lattice thermal transport from basic vibrational properties for an interesting set of two-dimensional materials.

  3. Band alignment at the Cu{sub 2}ZnSn(S{sub x}Se{sub 1-x}){sub 4}/CdS interface

    Energy Technology Data Exchange (ETDEWEB)

    Haight, Richard; Barkhouse, Aaron; Gunawan, Oki; Shin, Byungha; Copel, Matt; Hopstaken, Marinus; Mitzi, David B [IBM TJ Watson Research Center, P.O. Box 218, Yorktown Hts., New York 10598 (United States)

    2011-06-20

    Energy band alignments between CdS and Cu{sub 2}ZnSn(S{sub x}Se{sub 1-x}){sub 4} (CZTSSe) grown via solution-based and vacuum-based deposition routes were studied as a function of the [S]/[S+Se] ratio with femtosecond laser ultraviolet photoelectron spectroscopy, photoluminescence, medium energy ion scattering, and secondary ion mass spectrometry. Band bending in the underlying CZTSSe layer was measured via pump/probe photovoltage shifts of the photoelectron spectra and offsets were determined with photoemission under flat band conditions. Increasing the S content of the CZTSSe films produces a valence edge shift to higher binding energy and increases the CZTSSe band gap. In all cases, the CdS conduction band offsets were spikes.

  4. Third-order nonlinear optical response of Ag-CdSe/PVA hybrid nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, S.K.; Kaur, Ramneek; Kaur, Jaspreet; Sharma, Mamta [Panjab University, Department of Physics, Center of Advanced Study in Physics, Chandigarh (India)

    2015-09-15

    Hybrid nanocomposites of II-VI semiconductor nanoparticles are gaining great interest in nonlinear optoelectronic devices. Present work includes the characterization of CdSe polymer nanocomposite prepared by chemical in situ technique. From X-ray diffraction, the hexagonal wurtzite structure of nanoparticles has been confirmed with spherical morphology from transmission electron microscopy. Ag-CdSe hybrid polymer nanocomposite has been prepared chemically at different Ag concentrations. The presence of Ag in hybrid nanocomposite has been confirmed with energy-dispersive X-ray spectroscopy. The effect of varying Ag concentration on the linear and nonlinear optical properties of the nanocomposites has been studied. In linear optical parameters, the linear absorption coefficient, refractive index, extinction coefficient and optical conductivity have been calculated. The third-order nonlinear optical properties have been observed with open- and closed-aperture Z-scan technique. The large nonlinear refractive index ∝10{sup -5} cm{sup 2}/W with self-focusing behaviour is due to the combined effect of quantum confinement and thermo-optical effects. The enhanced nonlinearity with increasing Ag content is due to the surface plasmon resonance, which enhances the local electric field near the nanoparticle surface. Thus, Ag-CdSe hybrid polymer nanocomposite has favourable nonlinear optical properties for various optoelectronic applications. (orig.)

  5. Third-order nonlinear optical response of Ag-CdSe/PVA hybrid nanocomposite

    International Nuclear Information System (INIS)

    Tripathi, S.K.; Kaur, Ramneek; Kaur, Jaspreet; Sharma, Mamta

    2015-01-01

    Hybrid nanocomposites of II-VI semiconductor nanoparticles are gaining great interest in nonlinear optoelectronic devices. Present work includes the characterization of CdSe polymer nanocomposite prepared by chemical in situ technique. From X-ray diffraction, the hexagonal wurtzite structure of nanoparticles has been confirmed with spherical morphology from transmission electron microscopy. Ag-CdSe hybrid polymer nanocomposite has been prepared chemically at different Ag concentrations. The presence of Ag in hybrid nanocomposite has been confirmed with energy-dispersive X-ray spectroscopy. The effect of varying Ag concentration on the linear and nonlinear optical properties of the nanocomposites has been studied. In linear optical parameters, the linear absorption coefficient, refractive index, extinction coefficient and optical conductivity have been calculated. The third-order nonlinear optical properties have been observed with open- and closed-aperture Z-scan technique. The large nonlinear refractive index ∝10 -5 cm 2 /W with self-focusing behaviour is due to the combined effect of quantum confinement and thermo-optical effects. The enhanced nonlinearity with increasing Ag content is due to the surface plasmon resonance, which enhances the local electric field near the nanoparticle surface. Thus, Ag-CdSe hybrid polymer nanocomposite has favourable nonlinear optical properties for various optoelectronic applications. (orig.)

  6. Increased Leg Bone Mineral Density and Content During the Initial Years of College Sport.

    Science.gov (United States)

    Scerpella, John J; Buehring, Bjoern; Hetzel, Scott J; Heiderscheit, Bryan C

    2018-04-01

    Scerpella, JJ, Buehring, B, Hetzel, SJ, and Heiderscheit, BC. Increased leg bone mineral density and content during the initial years of college sport. J Strength Cond Res 32(4): 1123-1130, 2018-Bone mineral density (BMD) and bone mineral content (BMC) data are useful parameters for evaluating how training practices promote bone health. We used dual-energy X-ray absorptiometry (DXA) to longitudinally assess sport-specific growth in leg and total body BMD/BMC over the initial 2 years of collegiate training. Eighty-five Division 1 collegiate basketball, hockey, and soccer athletes (50 males and 35 females; age 19.0 [0.8] years) underwent annual DXA scans. Leg and total body BMD/BMC were compared within and across two 1-year intervals (periods 1 and 2) using repeated-measures analysis of variance, adjusting for age, sex, race, and sport. Leg BMD, leg BMC, and total body BMC all increased over period 1 (0.05 g·cm [p = 0.001], 0.07 kg [p = 0.002], and 0.19 kg [p BMC (p BMC (p = 0.005). Leg lean mass increased more during period 2 than period 1 (p = 0.018). Sports participation was the only significant predictor of change in leg BMD. Significant increases in both leg BMD and BMC were demonstrated over both 2-year periods, with greater gains during period 1. These gains highlight the importance of attentive training procedures, capitalizing on attendant physical benefits of increased BMD/BMC. Additional research in young adults, evaluating bone mass acquisition, will optimize performance and decrease risk of bone stress injury among collegiate athletes.

  7. Development of a Dunaliella tertiolecta Strain with Increased Zeaxanthin Content Using Random Mutagenesis.

    Science.gov (United States)

    Kim, Minjae; Ahn, Junhak; Jeon, Hancheol; Jin, EonSeon

    2017-06-21

    Zeaxanthin is a xanthophyll pigment that is regarded as one of the best carotenoids for the prevention and treatment of degenerative diseases. In the worldwide natural products market, consumers prefer pigments that have been produced from biological sources. In this study, a Dunaliella tertiolecta strain that has 10-15% higher cellular zeaxanthin content than the parent strain ( zea1 ), was obtained by random mutagenesis using ethyl methanesulfonate (EMS) as a mutagen. This mutant, mp3 , was grown under various salinities and light intensities to optimize culture conditions for zeaxanthin production. The highest cellular zeaxanthin content was observed at 1.5 M NaCl and 65-85 μmol photons·m -2 ·s -1 , and the highest daily zeaxanthin productivity was observed at 0.6 M NaCl and 140-160 μmol photons·m -2 ·s -1 . The maximal yield of zeaxanthin from mp3 in fed-batch culture was 8 mg·L -1 , which was obtained at 0.6 M NaCl and 140-160 μmol photons·m -2 ·s -1 . These results suggest that random mutagenesis with EMS is useful for generating D. tertiolecta strains with increased zeaxanthin content, and also suggest optimal culture conditions for the enhancement of biomass and zeaxanthin production by the zeaxanthin accumulating mutant strains.

  8. The Ag2Se-HgSe-GeSe2 system and crystal structures of the compounds

    International Nuclear Information System (INIS)

    Parasyuk, O.V.; Gulay, L.D.; Romanyuk, Ya.E.; Olekseyuk, I.D.; Piskach, L.V.

    2003-01-01

    The phase diagram of the quasi-ternary Ag 2 Se-HgSe-GeSe 2 system at 298 K was investigated using X-ray phase analysis and metallography. The formation of five intermediate quaternary phases β (Ag ∼7.12-∼6.32 Hg ∼0.44-∼0.82 GeSe 6 ), γ (Ag ∼6.08-∼4.00 Hg ∼0.96-∼2.00 GeSe 6 ), δ (Ag 3.4 Hg 2.3 GeSe 6 ), ε (Ag ∼2.24-∼2.00 Hg ∼2.88-∼3.00 GeSe 6 ) and ∼Ag 1.4 Hg 1.3 GeSe 6 was established. The crystal structure of the β-phase (for the Ag 6.504 Hg 0.912 GeSe 6 composition) was determined using X-ray single crystal diffraction. It crystallizes in a cubic structure (space group F4-bar 3m) with the lattice parameter a=1.09026(4) nm. The crystal structure of the δ-phase (Ag 3.4 Hg 2.3 GeSe 6 ) was determined using X-ray powder diffraction (space group F4-bar 3m, a=1.07767(8) nm). The crystal structure determination of the γ-phase (space group Pmn2 1 ) was performed for the compositions Ag 5.6 Hg 1.2 GeSe 6 , Ag 4.8 Hg 1.6 GeSe 6 and Ag 4 Hg 2 GeSe 6 using X-ray powder diffraction. The crystal structure of the LT-Hg 2 GeSe 4 compound (space group I4-bar , a=0.56786(2), c=1.12579(5) nm) was confirmed by powder diffraction also.

  9. Significance of Increasing n-3 PUFA Content in Pork on Human Health.

    Science.gov (United States)

    Ma, Xianyong; Jiang, Zongyong; Lai, Chaoqiang

    2016-01-01

    Evidence for the health-promoting effects of food rich in n-3 polyunsaturated fatty acids (n-3 PUFA) is reviewed. Pork is an important meat source for humans. According to a report by the US Department of Agriculture ( http://www.ers.usda.gov/topics ), the pork consumption worldwide in 2011 was about 79.3 million tons, much higher than that of beef (48.2 million tons). Pork also contains high levels of unsaturated fatty acids relative to ruminant meats (Enser, M., Hallett, K., Hewett, B., Fursey, G. A. J. and Wood, J. D. (1996) . Fatty acid content and composition of English beef, lamb, and pork at retail. Meat Sci. 44:443-458). The available literature indicates that the levels of eicosatetraenoic and docosahexaenoic in pork may be increased by fish-derived or linseed products, the extent of which being dependent on the nature of the supplementation. Transgenic pigs and plants show promise with high content of n-3 PUFA and low ratio of n-6/n-3 fatty acids in their tissues. The approaches mentioned for decreasing n-6/n-3 ratios have both advantages and disadvantages. Selected articles are critically reviewed and summarized.

  10. Effect of SbSn additions on the physical characterization of amorphous Se

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Rahim, Farid M., E-mail: farid.elkhateb@gmail.com [Physics Department, Faculty of Science, Al-Azhar, University, Assiut Branch, Assiut (Egypt); Physics Department, Faculty of Science and Arts, Khulais, King Abdulaziz University (KAU) (Saudi Arabia); Aly, K.A., E-mail: Kamalaly2001@gmail.com [Physics Department, Faculty of Science, Al-Azhar, University, Assiut Branch, Assiut (Egypt); Physics Department, Faculty of Science and Arts, Khulais, King Abdulaziz University (KAU) (Saudi Arabia); Dahshan, A. [Department of Physics, Faculty of Science, Port Said, University, Port Said (Egypt); Physics Department - Faculty of Girls - King Khalid University, Abha (Saudi Arabia)

    2011-08-15

    Highlights: {yields} The present work deals with the incorporation the optical properties of amorphous Se with SbSn. {yields} High accuracy determination of the film thickness and the complex index of refraction. {yields} The allowed non-direct electronic transitions are mainly responsible for the photon absorption in the investigated films. {yields} The changes in the refractive index were discussed in terms of the single-oscillator model (Wemple-DiDomenico relationship). {yields} The obtained results were discussed in terms of the chemical-bond approach. - Abstract: Different compositions of Se{sub 100-x}(SbSn){sub x} (0 {<=} x {<=} 14 at.%) glasses were prepared by the well-known melt quench technique. Thin films of these glasses were prepared by thermal evaporation onto ultrasonic cleaned glass substrate. Transmittance spectra of these films were measured in the wavelength range 400-2500 nm by using Jasco double beam spectrophotometer. A straight forward analysis proposed by Swanepoel, based on the maxima and minima of the transmittance spectra, allows to accurate determination of the film thickness and the complex index of refraction. Increasing SbSn content at the expense of Se atoms is found to affect the refractive index and the extinction coefficient of these films. The refractive indexes were discussed in terms of the single-oscillator Wemple-DiDomenico model. The compositional dependence of the optical band gap for the Se{sub 100-x}(SbSn){sub x} (0 {<=} x {<=} 14 at.%) thin films is discussed in terms of the chemical-bond approach.

  11. Human circulating ribosomal DNA content significantly increases while circulating satellite III (1q12) content decreases under chronic occupational exposure to low-dose gamma- neutron and tritium beta-radiation.

    Science.gov (United States)

    Korzeneva, Inna B; Kostuyk, Svetlana V; Ershova, Elizaveta S; Skorodumova, Elena N; Zhuravleva, Veronika F; Pankratova, Galina V; Volkova, Irina V; Stepanova, Elena V; Porokhovnik, Lev N; Veiko, Natalia N

    A single exposure to ionizing radiation (IR) results in an elevated cell-free DNA (cfDNA) content in the blood plasma. In this case, the cfDNA concentration can be a marker of the cell death in the organism. However, a chronic exposure to a low-dose IR enhances both the endonuclease activity and titer of antibodies to DNA in blood plasma, resulting in a decrease of the total concentration of circulating cfDNA in exposed people. In this case, the total cfDNA concentration should not be considered as a marker of the cell death in an exposed body. We assumed that a pool of the cfDNA circulating in the exposed people contains DNA fragments, which are resistant to a double-strand break formation in the environment of the elevated plasma endonuclease activity, and can be accumulated in the blood plasma. In order to test this hypothesis, we studied the content of GC-rich sequences (69%GC) of the transcribed region of human ribosomal repeat (rDNA), as well as the content of AT-rich repeat (63%AT) of satellite III (1q12) in the cfDNA samples obtained from 285 individuals. We have found that a chronic exposure to gamma-neutron radiation (N=88) and tritium β-radiation (N=88) evokes an increase of the rDNA content (RrDNA index) and a decrease of the satellite III content (RsatIII index) in the circulating cfDNA as compared with the cfDNA of non-exposed people (N=109). Such index that simultaneously displays both the increase of rDNA content and decrease of satellite III content in the cfDNA (RrDNA/RsatIII) can be recommended as a marker of chronic processes in the body that involve the elevated cell death rate and/or increased blood plasma endonuclease activity. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Linear and nonlinear optical properties of Sb-doped GeSe2 thin films

    Science.gov (United States)

    Zhang, Zhen-Ying; Chen, Fen; Lu, Shun-Bin; Wang, Yong-Hui; Shen, Xiang; Dai, Shi-Xun; Nie, Qiu-Hua

    2015-06-01

    Sb-doped GeSe2 chalcogenide thin films are prepared by the magnetron co-sputtering method. The linear optical properties of as-deposited films are derived by analyzing transmission spectra. The refractive index rises and the optical band gap decreases from 2.08 eV to 1.41 eV with increasing the Sb content. X-ray photoelectron spectra further confirm the formation of a covalent Sb-Se bond. The third-order nonlinear optical properties of thin films are investigated under femtosecond laser excitation at 800 nm. The results show that the third-order nonlinear optical properties are enhanced with increasing the concentration of Sb. The nonlinear refraction indices of these thin films are measured to be on the order of 10-18 m2/W with a positive sign and the nonlinear absorption coefficients are obtained to be on the order of 10-10 m/W. These excellent properties indicate that Sb-doped Ge-Se films have a good prospect in the applications of nonlinear optical devices. Project supported by the National Key Basic Research Program of China (Grant No. 2012CB722703), the National Natural Science Foundation of China (Grant No. 61377061), the Young Leaders of Academic Climbing Project of the Education Department of Zhejiang Province, China (Grant No. pd2013092), the Program for Innovative Research Team of Ningbo City, China (Grant No. 2009B217), and the K. C. Wong Magna Fund in Ningbo University, China.

  13. Increases of equatorial total electron content (TEC) during magnetic storms

    International Nuclear Information System (INIS)

    Yeboah-Amankwah, D.

    1976-01-01

    This paper is a report on the analysis of equatorial electron content, TEC, during magnetic storms. Storms between 1969 and 1972 have been examined as part of an on-going study of TEC morphology during magnetically disturbed days. The published magnetic Ksup(p) indices and TEC data from the Legon abservatory have been employed. The general picture arising from the analysis is that the total electron content of the ionosphere is significantly enhanced during magnetic storms. (author)

  14. Dewatering treatments to increase dry matter content of the brown seaweed, kelp (Laminaria digitata ((Hudson) JV Lamouroux)).

    Science.gov (United States)

    Gallagher, Joe A; Turner, Lesley B; Adams, Jessica M M; Dyer, Philip W; Theodorou, Michael K

    2017-01-01

    Macroalgal water content is an on-going problem for the use of readily accessible seaweeds in sustainable biorefining, including fuel production. Silage is a reduced-water, compactable, easily stored, transportable material. Ensiling could establish a non-seasonal supply of preserved algal biomass, but requires high initial dry matter content to mitigate environmental pollution risks from effluent. This study investigated potential dewatering methods for kelp harvested throughout the year. Treatments included air-drying, osmotic media and acids. Significant interactions between treatment and harvest-time were observed for traits of interest. Fresh weight loss during treatment was composed of changes in water and dry matter content. Air-drying gave reliable increase in final dry matter content; in summer and autumn 30% dry matter content was reached after 24h. Dilute hydrochloric acid reduced stickiness and rendered material suitable for dewatering by screw-pressing; it may be possible to use the consequent pH reduction to promote efficient preservation. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  15. Synthesis of CdSe Quantum Dots Using Fusarium oxysporum

    Directory of Open Access Journals (Sweden)

    Takaaki Yamaguchi

    2016-10-01

    Full Text Available CdSe quantum dots are often used in industry as fluorescent materials. In this study, CdSe quantum dots were synthesized using Fusarium oxysporum. The cadmium and selenium concentration, pH, and temperature for the culture of F. oxysporum (Fusarium oxysporum were optimized for the synthesis, and the CdSe quantum dots obtained from the mycelial cells of F. oxysporum were observed by transmission electron microscopy. Ultra-thin sections of F. oxysporum showed that the CdSe quantum dots were precipitated in the intracellular space, indicating that cadmium and selenium ions were incorporated into the cell and that the quantum dots were synthesized with intracellular metabolites. To reveal differences in F. oxysporum metabolism, cell extracts of F. oxysporum, before and after CdSe synthesis, were compared using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE. The results suggested that the amount of superoxide dismutase (SOD decreased after CdSe synthesis. Fluorescence microscopy revealed that cytoplasmic superoxide increased significantly after CdSe synthesis. The accumulation of superoxide may increase the expression of various metabolites that play a role in reducing Se4+ to Se2− and inhibit the aggregation of CdSe to make nanoparticles.

  16. Predicted net efflux of radiocarbon from the ocean and increase in atmospheric radiocarbon content

    Science.gov (United States)

    Caldeira, Ken; Rau, Greg H.; Duffy, Philip B.

    Prior to changes introduced by man, production of radiocarbon (14C) in the stratosphere nearly balanced the flux of 14C from the atmosphere to the ocean and land biosphere, which in turn nearly balanced radioactive decay in these 14C reservoirs. This balance has been altered by land-use changes, fossil-fuel burning, and atmospheric nuclear detonations. Here, we use a model of the global carbon cycle to quantify these radiocarbon fluxes and make predictions about their magnitude in the future. Atmospheric nuclear detonations increased atmospheric 14C content by about 80% by the mid-1960's. Since that time, the 14C content of the atmosphere has been diminishing as this bomb radiocarbon has been entering the oceans and terrestrial biosphere. However, we predict that atmospheric 14C content will reach a minimum and start to increase within the next few years if fossil-fuel burning continues according to a “business-as-usual” scenario, even though fossil fuels are devoid of 14C. This will happen because fossil-fuel carbon diminishes the net flux of 14C from the atmosphere to the oceans and land biosphere, forcing 14C to accumulate in the atmosphere. Furthermore, the net flux of both bomb and natural 14C into the ocean are predicted to continue to slow and then, in the middle of the next century, to reverse, so that there will be a net flux of 14C from the ocean to the atmosphere. The predicted reversal of net 14C fluxes into the ocean is a further example of human impacts on the global carbon cycle.

  17. Phase diagram of Se-CaIn4Se7 system

    International Nuclear Information System (INIS)

    Musaeva, R.I.; Aliev, I.I; Ismailova, F.I; Aliev, A.A

    2011-01-01

    Full text: The Se-CaIn 4 Se 7 system has been studied using methods of differential thermal analysis, X-ray diffraction, micro structural analysis, density measurements and its phase diagram has been constructed. It has been established that the section Se-CaIn 4 Se 7 is a quasibinary section of the ternary system Ca-In-Se. At room temperature, on the basis of CaIn 2 Se 4 and Se no solid solution has been found

  18. Formation and reconstruction of Se nanoislands at the surface of thin epitaxial ZnSe layers grown on GaAs substrates

    Energy Technology Data Exchange (ETDEWEB)

    Kozlovskiy, V. I.; Krivobok, V. S., E-mail: krivobok@lebedev.ru [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation); Kuznetsov, P. I.; Nikolaev, S. N.; Onistchenko, E. E.; Pruchkina, A. A.; Temiryazev, A. G. [Russian Academy of Sciences, Kotel’nikov Institute of Radio-Engineering and Electronics (Russian Federation)

    2016-05-15

    Strained epitaxial ZnSe layers are grown on GaAs substrates by the method of vapor-phase epitaxy from metal-organic compounds. It is found that Se nanoislands with a density of 10{sup 8} to 10{sup 9} cm{sup –2} are formed at the surface of such layers. It is established that an increase in the size of Se islands and a decrease in their density take place after completion of growth. Annealing in a H{sub 2} atmosphere at a temperature higher than 260°C leads to the disappearance of Se islands and to a decrease in the surface roughness. It is shown that annealing does not lead to deterioration of the structural perfection of the epitaxial ZnSe films; rather, annealing gives rise to a decrease in the intensity of impurity–defect luminescence and to an increase in the intensity of intrinsic radiation near the bottom of the exciton band.

  19. Green synthesis of ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) using a new, rapid and room temperature photochemical approach

    International Nuclear Information System (INIS)

    Molaei, M.; Bahador, A.R.; Karimipour, M.

    2015-01-01

    In this work, ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) were synthesized using a one-pot, rapid and room temperature photochemical method. UV illumination provided the required energy for the chemical reactions. Synthesized NCs were characterized using X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence (PL) spectroscopy. XRD pattern indicated cubic zinc blende structure for ZnSe NCs and the TEM image indicated round-shaped particles, most of which had a diameter of about 3 nm. Band gap of ZnSe NCs was obtained as about 3.6 eV, which was decreased by increasing the illumination time. Synthesized NCs indicated intensive and narrow emission in the UV-blue area (370 nm) related to the excitonic recombination and a broad band emission with a peak located at about 490 nm originated from the DAP (donor–acceptor pairs) recombination. ZnS shell was grown on ZnSe cores using a reaction based on the photo-sensitivity of Na 2 S 2 O 3 . For ZnSe@ZnS core–shell NCs, XRD diffraction peaks shifted to higher angles. TEM image indicated a shell around cores and most of the ZnSe@ZnS NCs have a diameter of about 5 nm. After the ZnS growth, ZnSe excitonic emission shifted to the longer wavelength and PL intensity was increased considerably. PL QY was obtained about 11% and 17% for ZnSe and ZnSe@ZnS core–shell QDs respectively. - Highlights: • A green photochemical approach was reported for synthesis of ZnSe NCs. • ZnS shell was grown around ZnSe using a new method. • Synthesis method was rapid, simple and at room temperature. • ZnSe NCs indicated a narrow UV-blue and a broad DAP emissions. • PL intensity was increased considerably by ZnS shell growth

  20. Arrays of ZnO/CuInxGa1−xSe2 nanocables with tunable shell composition for efficient photovoltaics

    International Nuclear Information System (INIS)

    Akram, Muhammad Aftab; Javed, Sofia; Xu, Jun; Mujahid, Mohammad; Lee, Chun-Sing

    2015-01-01

    Arrays of one-dimensional (1D) nanostructure are receiving much attention for their optoelectronic and photovoltaic applications due to their advantages in light absorption, charge separation, and transportation. In this work, arrays of ZnO/CuIn x Ga 1−x Se 2 core/shell nanocables with tunable shell compositions over the full range of 0 ≤ x ≤ 1 have been controllably synthesized. Chemical conversions of ZnO nanorods to a series of ZnO-based nanocables, including ZnO/ZnSe, ZnO/CuSe, ZnO/CuSe/In x Ga 1−x , ZnO/CuSe/(In x Ga 1−x ) 2 Se 3 , and ZnO/CuIn x Ga 1−x Se 2 , are well designed and successfully achieved. Composition-dependent influences of the CuIn x Ga 1−x Se 2 shells on photovoltaic performance are investigated. It is found that the increase in indium content (x) leads to an increase in short-circuit current density (J SC ) but a decrease in open-circuit voltage (V OC ) for the ZnO/CuIn x Ga 1−x Se 2 nanocable solar cells. An array of ZnO/CuIn 0.67 Ga 0.33 Se 2 nanocables with a length of ∼1 μm and a shell thickness of ∼10 nm exhibits a bandgap of 1.20 eV, and yields a maximum power conversion efficiency of 1.74% under AM 1.5 G illumination at an intensity of 100 mW/cm 2 . It dramatically surpasses that (0.22%) of the ZnO/CuIn 0.67 Ga 0.33 Se 2 planar thin-film device. Our work reveals that 1D nanoarray allows efficient photovoltaics without using toxic CdS buffer layer

  1. Surface half-metallicity of half-Heusler compound FeCrSe and interface half-metallicity of FeCrSe/GaP

    Energy Technology Data Exchange (ETDEWEB)

    Khalaf Al-zyadi, Jabbar M., E-mail: jabbar_alzyadi@yahoo.com [Department of Physics, College of Education for Pure Sciences, University of Basrah (Iraq); Jolan, Mudhahir H. [Department of Physics, College of Education for Pure Sciences, University of Basrah (Iraq); Yao, Kai-Lun, E-mail: klyao@mail.hust.edu.cn [School of Physics and Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan 430074 (China); International Center of Materials Physics, Chinese Academy of Sciences, Shenyang 110015 (China)

    2016-04-01

    Recent studies showed that half-Heusler FeCrSe exhibits half-metallic ferromagnetism (Huang et al. [20]). In this paper, we investigate extensively the electronic, magnetic, and half-metallic properties of the half-Heusler alloy FeCrSe (111) and (001) surfaces and the interface with GaP (111) substrate by using the first-principles calculations within the density functional theory. The atomic density of states demonstrates that the half-me tallicity verified in the bulk FeCrSe is maintained at the CrSe-terminated (001) and Se-terminated (111) surfaces, but lost at both Cr- and Fe-terminated (111) surfaces and the Fe-terminated (001) surface. Alternatively, for the interface of FeCrSe/GaP (111), the bulk half-metallicity is destroyed at Se–P configuration while Se–Ga interface and subinterface show nearly 100% spin polarization. Moreover, the calculated interfacial adhesion energies exhibit that Se–Ga shape is more stable than the Se–P one. The calculated magnetic moments of Se, Ga at the Se–Ga (111) interface and P at the Se–P (111) interface increase with respect to the corresponding bulk values while the atomic magnetic moment of Se atom at the Se–P (111) interface decreases. We also notice that the magnetic moments of subinterface Fe at both Se–Ga and Se–P (111) interfaces decrease compared to the bulk values. - Highlights: • The half-metallicity verified in the bulk FeCrSe is kept at the CrSe-terminated (001) and Se-terminated (111) surfaces. • The calculated interfacial adhesion energies exhibit that Se–Ga shape is more stable than Se–P. • The magnetic moments of Se, Ga and P atoms at the interface increase. • The Se–Ga interface shows nearly 100% spin polarization.

  2. Exploring the doping effects of Ag in p-type PbSe compounds with enhanced thermoelectric performance

    Science.gov (United States)

    Wang, Shanyu; Zheng, Gang; Luo, Tingting; She, Xiaoyu; Li, Han; Tang, Xinfeng

    2011-11-01

    In this study, we prepared a series of Ag-doped PbSe bulk materials by a melting-quenching process combined with a subsequent spark plasma sintering process, and systematically investigated the doping effects of Ag on the thermoelectric properties. Ag substitution in the Pb site does not introduce resonant levels near the valence band edge or detectable change in the density of state in the vicinity of the Fermi level, but moves the Fermi level down and increases the carrier concentration to a maximum value of ~4.7 × 1019 cm-3 which is still insufficient for heavily doped PbSe compounds. Nonetheless, the non-monotonic variation in carrier concentration with increasing Ag content indicates that Ag doping reaches the solution limit at ~1.0% and the excessive Ag presumably acts as donors in the materials. Moreover, the large energy gap of the PbSe-based material wipes off significant 'roll-over' in the Seebeck coefficient at elevated temperatures which gives rise to high power factors, being comparable to p-type Te analogues. Consequently, the maximum ZT reaches ~1.0 for the 1.5% Ag-doped samples with optimized carrier density, which is ~70% improvement in comparison with an undoped sample and also superior to the commercialized p-type PbTe materials.

  3. Selenium deficiency risk predicted to increase under future climate change.

    Science.gov (United States)

    Jones, Gerrad D; Droz, Boris; Greve, Peter; Gottschalk, Pia; Poffet, Deyan; McGrath, Steve P; Seneviratne, Sonia I; Smith, Pete; Winkel, Lenny H E

    2017-03-14

    Deficiencies of micronutrients, including essential trace elements, affect up to 3 billion people worldwide. The dietary availability of trace elements is determined largely by their soil concentrations. Until now, the mechanisms governing soil concentrations have been evaluated in small-scale studies, which identify soil physicochemical properties as governing variables. However, global concentrations of trace elements and the factors controlling their distributions are virtually unknown. We used 33,241 soil data points to model recent (1980-1999) global distributions of Selenium (Se), an essential trace element that is required for humans. Worldwide, up to one in seven people have been estimated to have low dietary Se intake. Contrary to small-scale studies, soil Se concentrations were dominated by climate-soil interactions. Using moderate climate-change scenarios for 2080-2099, we predicted that changes in climate and soil organic carbon content will lead to overall decreased soil Se concentrations, particularly in agricultural areas; these decreases could increase the prevalence of Se deficiency. The importance of climate-soil interactions to Se distributions suggests that other trace elements with similar retention mechanisms will be similarly affected by climate change.

  4. Wide emission-tunable CdTeSe/ZnSe/ZnS core–shell quantum dots and their conjugation with E. coli O-157

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Haifeng [State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Zhou, Guangjun, E-mail: gjzhou@sdu.edu.cn [State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Zhou, Juan [Center for Disease Control and Prevention of Jinan Military Command, Jinan 250014 (China); Xu, Dong; Zhang, Xingshuang; Kong, Peng; Yang, Zhongsen [State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China)

    2015-05-15

    Highlights: • QDs with variety morphology were obtained via an injection controlled process. • 3-D PL spectra of core–shell QDs show different excitation wavelength dependence. • The PL intensity of QDs with ZnSe transition layer increases dramatically. • Core–shell QDs were processed into aqueous phase and conjugated with E. coli O-157. - Abstract: Wide emission-tunable and different morphological alloyed CdTeSe quantum dots (QDs), CdTeSe/ZnS and CdTeSe/ZnSe/ZnS core–shell QDs were successfully synthesized via an injection controlled process. The effect of injection procedure and reaction temperature were systematically discussed and the growth mechanism was proposed. Most efficient PL wavelength was correlated with reaction time and temperature. The 3-D PL spectra of spherical bare CdTeSe and core–shell QDs with different passivation showed different excitation wavelength dependency. The PL intensity of CdTeSe/ZnSe/ZnS core–shell QDs increased greatly in comparison with that of CdTeSe and CdTeSe/ZnSe QDs. ZnSe transition layer played an important role in improving the PL intensity by providing a smoothened interface and gradient band offsets. The core–shell QDs were transferred into aqueous phase and successfully conjugated with Escherichia coli O-157. The proposed phase-transfer and bio-labeling strategy may be applicable to various QDs with different compositions.

  5. Embryo-specific expression of soybean oleosin altered oil body morphogenesis and increased lipid content in transgenic rice seeds.

    Science.gov (United States)

    Liu, Wen Xian; Liu, Hua Liang; Qu, Le Qing

    2013-09-01

    Oleosin is the most abundant protein in the oil bodies of plant seeds, playing an important role in regulating oil body formation and lipid accumulation. To investigate whether lipid accumulation in transgenic rice seeds depends on the expression level of oleosin, we introduced two soybean oleosin genes encoding 24 kDa proteins into rice under the control of an embryo-specific rice promoter REG-2. Overexpression of soybean oleosin in transgenic rice leads to an increase of seed lipid content up to 36.93 and 46.06 % higher than that of the non-transgenic control, respectively, while the overall fatty acid profiles of triacylglycerols remained unchanged. The overexpression of soybean oleosin in transgenic rice seeds resulted in more numerous and smaller oil bodies compared with wild type, suggesting that an inverse relationship exists between oil body size and the total oleosin level. The increase in lipid content is accompanied by a reduction in the accumulation of total seed protein. Our results suggest that it is possible to increase rice seed oil content for food use and for use as a low-cost feedstock for biodiesel by overexpressing oleosin in rice seeds.

  6. LA PLANIFICACIÓN DE LOS CONTENIDOS DE ENTRENAMIENTO DE BALONCESTO EN EQUIPOS DE INICIACIÓN [Planning the contents of training in early age basketball teams

    Directory of Open Access Journals (Sweden)

    María Cañadas Alonso

    2010-04-01

    basketball process training was in initation stage. Specifically how to plan the contents of this sport over a season. For that, training activities planned by a coach who performed their work in a initation team were analyzed. 846 training activities for two seasons were studied. All training sessions were introduced in the PYC-Basket program to quantify the training. The study variables were the contents of training and media training. An initial descriptive analysis of the data to understand how the planning process was carried out. Subsequently, an inferential analysis was performed to study the relationship between two variables and examine the way it presents the development of each content. The planning and recording of the elements that define the coaching situation allowed the control of the programming content of training. The results show a predominance of technical contents, particularly of the individual gestures of attack. Contents also evolve in their treatment during the analyzed seasons. The individual technical and tactical gestures increase over the season. The individual technical and tactical behaviors were reduced with increasing tactical behaviors and collective group techniques. In the planned tasks, the use of means such as exercises and training games for each type of content were combined. Exercises were used to develop the technique and tactics games. Keywords: pedagogical variables, coaching, sport initiation, planning, contents, basketball.

  7. LA PLANIFICACIÓN DE LOS CONTENIDOS DE ENTRENAMIENTO DE BALONCESTO EN EQUIPOS DE INICIACIÓN [Planning the contents of training in early age basketball teams

    Directory of Open Access Journals (Sweden)

    María Cañadas Alonso

    2010-04-01

    how basketball process training was in initation stage. Specifically how to plan the contents of this sport over a season. For that, training activities planned by a coach who performed their work in a initation team were analyzed. 846 training activities for two seasons were studied. All training sessions were introduced in the PYC-Basket program to quantify the training. The study variables were the contents of training and media training. An initial descriptive analysis of the data to understand how the planning process was carried out. Subsequently, an inferential analysis was performed to study the relationship between two variables and examine the way it presents the development of each content. The planning and recording of the elements that define the coaching situation allowed the control of the programming content of training. The results show a predominance of technical contents, particularly of the individual gestures of attack. Contents also evolve in their treatment during the analyzed seasons. The individual technical and tactical gestures increase over the season. The individual technical and tactical behaviors were reduced with increasing tactical behaviors and collective group techniques. In the planned tasks, the use of means such as exercises and training games for each type of content were combined. Exercises were used to develop the technique and tactics games. Keywords: pedagogical variables, coaching, sport initiation, planning, contents, basketball.

  8. Semiconductor-metal transition of Se in Ru-Se Catalyst Nanoparticles

    Science.gov (United States)

    Babu, P. K.; Lewera, Adam; Oldfield, Eric; Wieckowski, Andrzej

    2009-03-01

    Ru-Se composite nanoparticles are promising catalysts for the oxygen reduction reaction (ORR) in fuel cells. Though the role of Se in enhancing the chemical stability of Ru nanoparticles is well established, the microscopic nature of Ru-Se interaction was not clearly understood. We carried out a combined investigation of ^77Se NMR and XPS on Ru-Se nanoparticles and our results indicate that Se, a semiconductor in elemental form, becomes metallic when interacting with Ru. ^77Se spin-lattice relaxation rates are found to be proportional to T, the well-known Korringa behavior characteristic of metals. The NMR results are supported by the XPS binding energy shifts which suggest that a possible Ru->Se charge transfer could be responsible for the semiconductor->metal transition of Se which also makes Ru less susceptible to oxidation during ORR.

  9. Standards-based Content Resources: A Prerequisite for Content Integration and Content Interoperability

    Directory of Open Access Journals (Sweden)

    Christian Galinski

    2010-05-01

    Full Text Available Objective: to show how standards-based approaches for content standardization, content management, content related services and tools as well as the respective certification systems not only guarantee reliable content integration and content interoperability, but also are of particular benefit to people with special needs in eAccessibility/eInclusion. Method: document MoU/MG/05 N0221 ''Semantic Interoperability and the need for a coherent policy for a framework of distributed, possibly federated repositories for all kinds of content items on a world-wide scale''2, which was adopted in 2005, was a first step towards the formulation of global interoperability requirements for structured content. These requirements -based on advanced terminological principles- were taken up in EU-projects such as IN-SAFETY (INfrastructure and SAFETY and OASIS (Open architecture for Accessible Services Integration and Standardization. Results: Content integration and content interoperability are key concepts in connection with the emergence of state-of-the-art distributed and federated databases/repositories of structured content. Given the fact that linguistic content items are increasingly combined with or embedded in non-linguistic content items (and vice versa, a systemic and generic approach to data modelling and content management has become the order of the day. Fulfilling the requirements of capability for multilinguality and multimodality, based on open standards makes software and database design fit for eAccessibility/eInclusion from the outset. It also makes structured content capable for global content integration and content interoperability, because it enhances its potential for being re-used and re-purposed in totally different eApplications. Such content as well as the methods, tools and services applied can be subject to new kinds of certification schemes which also should be based on standards. Conclusions: Content must be totally reliable in some

  10. Optical properties of thermally annealed CdZnSe/ZnSe quantum dots

    International Nuclear Information System (INIS)

    Margapoti, Emanuela

    2010-01-01

    To analyse the diffusion characteristics, photoluminescence (PL) spectroscopy has been carried out in extensive detail on single, as well as, ensembles of thermally annealed (TA) CdSe/ZnSe QDs. For a series of QD-ensembles, each annealed for t A = 30 s at temperatures from T A = 300-550 C, the change in the QD-composition has been calculated from the blue-shift of the exciton ground-state PL-emission, using a concentration function based on Fick's laws of diffusion. The diffusion length (L D ) and the activation energy (E A ) have been determined thereof. For the studied QDs, E A has been evaluated to be 2.2 eV. Additionally, TA results also in an enhancement of the PL-intensity and reduction of the full-width-at-half maximum (FWHM) of the spectra. This point towards an increased homogeneity of the QD-size and composition, and decrease in the concentration of defects around the QDs. For single CdSe/ZnSe QDs, TA has been varied from 100-240 C, in steps for 20 C, with t A kept fixed at 30 s. Finally, the evolution of the magneto-optic response with post-growth thermal annealing has been studied for both individual QDs and QD-ensembles. An external magnetic field, applied perpendicular to the plane of the QDs (Faraday configuration), results in Zeeman spin splitting of the ground exciton state. The emissions from the Zeeman-split states are left and right circularly polarized and from the degree of circular polarization (DCP), as well as, the spectral separation of the PL-peaks, the g-factor can be estimated. For CdSe/ZnSe QD-ensembles, the g-factor has been observed to change sign with TA. (orig.).

  11. Optical properties of thermally annealed CdZnSe/ZnSe quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Margapoti, Emanuela

    2010-07-01

    To analyse the diffusion characteristics, photoluminescence (PL) spectroscopy has been carried out in extensive detail on single, as well as, ensembles of thermally annealed (TA) CdSe/ZnSe QDs. For a series of QD-ensembles, each annealed for t{sub A} = 30 s at temperatures from T{sub A} = 300-550 C, the change in the QD-composition has been calculated from the blue-shift of the exciton ground-state PL-emission, using a concentration function based on Fick's laws of diffusion. The diffusion length (L{sub D}) and the activation energy (E{sub A}) have been determined thereof. For the studied QDs, E{sub A} has been evaluated to be 2.2 eV. Additionally, TA results also in an enhancement of the PL-intensity and reduction of the full-width-at-half maximum (FWHM) of the spectra. This point towards an increased homogeneity of the QD-size and composition, and decrease in the concentration of defects around the QDs. For single CdSe/ZnSe QDs, TA has been varied from 100-240 C, in steps for 20 C, with t{sub A} kept fixed at 30 s. Finally, the evolution of the magneto-optic response with post-growth thermal annealing has been studied for both individual QDs and QD-ensembles. An external magnetic field, applied perpendicular to the plane of the QDs (Faraday configuration), results in Zeeman spin splitting of the ground exciton state. The emissions from the Zeeman-split states are left and right circularly polarized and from the degree of circular polarization (DCP), as well as, the spectral separation of the PL-peaks, the g-factor can be estimated. For CdSe/ZnSe QD-ensembles, the g-factor has been observed to change sign with TA. (orig.).

  12. Mobility lifetime product in doped and undoped nanocrystalline CdSe

    International Nuclear Information System (INIS)

    Tripathi, S.K.; Al-Kabbi, Alaa S.; Sharma, Kriti; Saini, G.S.S.

    2013-01-01

    This paper reports the effect of doping on the charge transport in nanocrystalline CdSe thin film. The X-ray study confirms that the doping is achieved and the physical properties are improved. The energy resolution of a semiconductor radiation detector depends on the charge transport properties of the semiconductor and the mobility-lifetime (μτ) product is a key figure of merit for the charge transport. μτ product in nanocrystalline CdSe, CdSe:In and CdSe:Zn thin films has been estimated from temperature dependence of the photoconductivity, which increases with increase in temperature and doping. Also, μτ product of electrons in pure and doped nanocrystalline CdSe thin films has been determined by spectral photoconductivity at different applied voltages. Both the μτ and photoconductivity increase linearly with the bias voltage but the wavelength dependence remains qualitatively similar in all samples. The μτ products increase at photon energies > energy gap, which indicates that the recombination process depends on the excitation energy. The doped CdSe thin films have higher drift length in comparison with undoped films which suggest that these thin films can be used in charge collecting devices. - Highlights: • The structure of thin films has been studied using X-ray diffraction. • Spectral dependence of μτ product in pure and doped nc-CdSe thin films is studied. • The mobility-lifetime product shows dependence on temperature and doping type. • The drift length increases linearly with increasing applied field and doping. • The transport properties of nc-CdSe thin films are enhanced with doping

  13. Effect of lattice disorder on the thermal conductivity of ZnBeSe, ZnMgSe and ZnBeMgSe crystals

    International Nuclear Information System (INIS)

    Strzałkowski, K.

    2015-01-01

    Zn 1−x−y Be x Mg y Se mixed crystals investigated in this work were grown from the melt by the high pressure high temperature modified Bridgman method in the range of composition 0 < x,y < 0.33. Photopyroelectric (PPE) calorimetry in the back (BPPE) and front (FPPE) configuration was applied for thermal investigation of solid samples. The thermal diffusivity and effusivity of investigated crystals were derived from the experimental data. Since dynamic thermal parameters are connected with each other, thermal conductivity of the specimens was calculated from theoretical dependencies between them. The influence of the beryllium (x) and magnesium (y) content on thermal properties of these crystals have been presented and discussed. Order-disorder effects observed for these materials previously have been also taken into account. Finally, thermal diagrams, i.e. thermal conductivity versus composition were presented and discussed applying model given by Sadao Adachi. - Highlights: • Investigated II–VI crystals were obtained by a high pressure modified Bridgman method. • A complete thermal characterization of Zn 1−x−y Be x Mg y Se semiconductors was carried out. • The effect of lattice disorder on thermal properties was presented and discussed. • Obtained data were analyzed applying lattice thermal conductivity model. • Contribution to thermal resistivity arising from lattice disorder was calculated

  14. Reduced intracellular c-di-GMP content increases expression of quorum sensing-regulated genes in Pseudomonas aeruginosa

    DEFF Research Database (Denmark)

    Chua, Song Lin; Liu, Yang; Li, Yingying

    2017-01-01

    Cyclic-di-GMP (c-di-GMP) is an intracellular secondary messenger which controls the biofilm life cycle in many bacterial species. High intracellular c-di-GMP content enhances biofilm formation via the reduction of motility and production of biofilm matrix, while low c-di-GMP content in biofilm...... cells leads to increased motility and biofilm dispersal. While the effect of high c-di-GMP levels on bacterial lifestyles is well studied, the physiology of cells at low c-di-GMP levels remains unclear. Here, we showed that Pseudomonas aeruginosa cells with high and low intracellular c-di-GMP contents...... possessed distinct transcriptome profiles. There were 535 genes being upregulated and 432 genes downregulated in cells with low c-di-GMP, as compared to cells with high c-di-GMP. Interestingly, both rhl and pqs quorum-sensing (QS) operons were expressed at higher levels in cells with low intracellular c-di-GMP...

  15. Whole Grain Consumption Increases Gastrointestinal Content of Sulfate-Conjugated Oxylipins in Pigs − A Multicompartmental Metabolomics Study

    DEFF Research Database (Denmark)

    Ingerslev, Anne Krog; Karaman, İbrahim; Bağcıoğlu, Murat

    2015-01-01

    The effects of increased intake of dietary fiber as either arabinoxylan (AX) or resistant starch (RS) compared to a typical low dietary fiber Western-style diet (WSD) on the metabolomics responses was studied in gastrointestinal content and tissue, peripheral plasma and urine using a multicompart...... of multicompartmental metabolomics offers information about the correlations between the compartments of the digestive system, providing additional insight into effects of increased whole grain intake.......The effects of increased intake of dietary fiber as either arabinoxylan (AX) or resistant starch (RS) compared to a typical low dietary fiber Western-style diet (WSD) on the metabolomics responses was studied in gastrointestinal content and tissue, peripheral plasma and urine using......, and a low dietary fiber intake were detected using multi block analysis. This study provides insight into microbial fermentation products in the gastrointestinal tract, and suggests a potential role in sulfate conjugation of metabolites on the bioavailability of ingested nutrients. In addition, the use...

  16. Two-week inhalation of budesonide increases muscle Na,K ATPase content but not endurance in response to terbutaline in men.

    Science.gov (United States)

    Hostrup, M; Jessen, S; Onslev, J; Clausen, T; Porsbjerg, C

    2017-07-01

    While chronic systemic administration of glucocorticoids increases muscle Na + ,K + ATPase content, such effect is unexplored after therapeutic inhalation. We investigated the effect of therapeutic inhalation of the glucocorticoid budesonide on Na + ,K + ATPase content of skeletal muscle in men. Ten healthy trained subjects, aged 23 ± 4 years (mean ± 95% CI), participated in the study. Before and after 2 weeks of daily inhalation of budesonide (1.6 mg/day), a biopsy was taken from the vastus lateralis muscle for measurement of Na + ,K + ATPase content and blood samples were drawn for determination of plasma budesonide, cortisol, and K + . Subjects' performance during cycling to fatigue at 90% of incremental peak power output (iPPO) was measured in response to 4 mg inhaled terbutaline to maximally stimulate Na + ,K + ATPase activity. Plasma concentrations of budesonide rose to 5.0 ± 1.6 nM with the intervention, whereas no changes were observed in plasma cortisol. Muscle Na + ,K + ATPase content increased (P ≤ 0.01) by 46 ± 34 pmol/(g wet wt) (17% increase) with the intervention. Cycling performance at 90% of iPPO did not change (P = 0.21) with the intervention (203 vs 214 s) in response to terbutaline. The present observations show that therapeutic inhalation of glucocorticoids increases muscle Na + ,K + ATPase content, but does not enhance high-intensity cycling endurance in response to terbutaline. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Local structure and defect chemistry of [(SnSe)1.15]m(TaSe2) ferecrystals – A new type of layered intergrowth compound

    International Nuclear Information System (INIS)

    Grosse, Corinna; Atkins, Ryan; Kirmse, Holm; Mogilatenko, Anna; Neumann, Wolfgang; Johnson, David C.

    2013-01-01

    Highlights: •The crystal structure of [(SnSe) 1.15 ] m (TaSe 2 ) ferecrystals was analyzed by TEM. •The layers exhibit turbostratic disorder, but we also observed a local ordering. •The structures of the SnSe and TaSe 2 layers are similar to binary SnSe and 2H-TaSe 2 . •An increasing in-plane SnSe grain size with increasing m was observed. •Defect areas with missing, substituted or additional layers were found. -- Abstract: The atomic structure of the family of ferecrystals [(SnSe) 1.15 ] m (TaSe 2 ) (m = 1, 3, and 6) was investigated by means of transmission electron microscopy. The tantalum in the TaSe 2 layers was observed to have trigonal prismatic coordination similar to that found in the 2H polytype of bulk TaSe 2 . The structure of the SnSe constituent was found to be similar to that of orthorhombic α-SnSe. In the compounds with m = 1 and m = 3, regions with a local ordering of the layers along a commensurate axis, similar to the ordering in conventional misfit layer compounds, were observed. However, on a longer range the ferecrystals were found to exhibit a turbostratically disordered structure. Stacking defects were occasionally found in the samples in which a layer is interrupted and the surrounding layers are bent around these defects, while maintaining abrupt interfaces instead of interdiffusing. Volume defects were found in one sample of [(SnSe) 1.15 ] 1 (TaSe 2 ) 1 in which a SnSe layer locally substitutes a part of a TaSe 2 layer without interrupting the surrounding layers

  18. Synthesis and Characterization of an Earth-Abundant Cu2BaSn(S,Se)4 Chalcogenide for Photoelectrochemical Cell Application.

    Science.gov (United States)

    Shin, Donghyeop; Ngaboyamahina, Edgard; Zhou, Yihao; Glass, Jeffrey T; Mitzi, David B

    2016-11-17

    Cu 2 BaSnS 4-x Se x films consisting of earth-abundant metals have been examined for photocathode application. Films with different Se contents (i.e., Cu 2 BaSnS 4-x Se x with x ≤ 2.4) were synthesized using a cosputter system with post-deposition sulfurization/selenization annealing treatments. Each film adopts a trigonal P3 1 crystal structure, with progressively larger lattice constants and with band gaps shifting from 2.0 to 1.6 eV, as more Se substitutes for S in the parent compound Cu 2 BaSnS 4 . Given the suitable bandgap and earth-abundant elements, the Cu 2 BaSnS 4-x Se x films were studied as prospective photocathodes for water splitting. Greater than 6 mA/cm 2 was obtained under illumination at -0.4 V versus reversible hydrogen electrode for Pt/Cu 2 BaSnS 4-x Se x films with ∼60% Se content (i.e., x = 2.4), whereas a bare Cu 2 BaSnS 4-x Se x (x = 2.4) film yielded ∼3 mA/cm 2 at -0.4 V/RHE.

  19. Attempting to realize n-type BiCuSeO

    Science.gov (United States)

    Zhang, Xiaoxuan; Feng, Dan; He, Jiaqing; Zhao, Li-Dong

    2018-02-01

    As an intrinsic p-type semiconductor, BiCuSeO has been widely researched in the thermoelectric community, however, n-type BiCuSeO has not been reported so far. In this work, we successfully realized n-type BiCuSeO through carrying out several successive efforts. Seebeck coefficient of BiCuSeO was increased through introducing extra Bi/Cu to fill the Bi/Cu vacancies that may produce holes, and the maximum Seebeck coefficient was increase from +447 μVK-1 for undoped BiCuSeO to +638 μVK-1 for Bi1.04Cu1.05SeO. The Seebeck coefficient of Bi1.04Cu1.05SeO was changed from p-type to n-type through electron doping through introducing Br/I in Se sites, the maximum negative Seebeck coefficient can reach ∼ -465 μVK-1 and -543 μVK-1 for Bi1.04Cu1.05Se1-xIxO and Bi1.04Cu1.05Se1-xBrxO, respectively. Then, after compositing Bi1.04Cu1.05Se0.99Br0.01O with Ag, n-type BiCuSeO can be absolutely obtained in the whole temperature range of 300-873 K, the maximum ZT 0.05 was achieved at 475 K in the Bi1.04Cu1.05Se0.99Br0.01O+15% Ag. Our report indicates that it is possible to realize n-type conducting behaviors in BiCuSeO system.

  20. Bio-fortification and isotopic labelling of Se metabolites in onions and carrots following foliar application of Se and 77Se

    DEFF Research Database (Denmark)

    Kápolna, Emese; Laursen, Kristian H.; Husted, Søren

    2012-01-01

    Se. The 77Se- labelled metabolites in onions were predominantly γ-glutamyl-77Se-selenomethyl-selenocysteine (γ-glu-Me77SeCys), 77Se-methylselenocysteine (Me77SeCys) and 77Se-selenomethionine (77SeMet). Furthermore, we report here for the first time the finding in carrots of the bioactive Me77SeCys...

  1. Enhancement of hole mobility in InSe monolayer via an InSe and black phosphorus heterostructure.

    Science.gov (United States)

    Ding, Yi-Min; Shi, Jun-Jie; Xia, Congxin; Zhang, Min; Du, Juan; Huang, Pu; Wu, Meng; Wang, Hui; Cen, Yu-Lang; Pan, Shu-Hang

    2017-10-05

    To enhance the low hole mobility (∼40 cm 2 V -1 s -1 ) of InSe monolayer, a novel two-dimensional (2D) van der Waals heterostructure made of InSe and black phosphorus (BP) monolayers with high hole mobility (∼10 3 cm 2 V -1 s -1 ) has been constructed and its structural and electronic properties are investigated using first-principles calculations. We find that the InSe/BP heterostructure exhibits a direct band gap of 1.39 eV and type-II band alignment with electrons (holes) located in the InSe (BP) layer. The band offsets of InSe and BP are 0.78 eV for the conduction band minimum and 0.86 eV for the valence band maximum, respectively. Surprisingly, the hole mobility in the InSe/BP heterostructure exceeds 10 4 cm 2 V -1 s -1 , which is one order of magnitude larger than the hole mobility of BP and three orders larger than that of the InSe monolayer. The electron mobility is also increased to 3 × 10 3 cm 2 V -1 s -1 . The physical reason has been analyzed deeply, and a universal method is proposed to improve the carrier mobility of 2D materials by forming heterostructures with them and other 2D materials with complementary properties. The InSe/BP heterostructure can thus be widely used in nanoscale InSe-based field-effect transistors, photodetectors and photovoltaic devices due to its type-II band alignment and high carrier mobility.

  2. Surface Passivation of CdSe Quantum Dots in All Inorganic Amorphous Solid by Forming Cd1-xZnxSe Shell.

    Science.gov (United States)

    Xia, Mengling; Liu, Chao; Zhao, Zhiyong; Wang, Jing; Lin, Changgui; Xu, Yinsheng; Heo, Jong; Dai, Shixun; Han, Jianjun; Zhao, Xiujian

    2017-02-07

    CdSe quantum dots (QDs) doped glasses have been widely investigated for optical filters, LED color converter and other optical emitters. Unlike CdSe QDs in solution, it is difficult to passivate the surface defects of CdSe QDs in glass matrix, which strongly suppress its intrinsic emission. In this study, surface passivation of CdSe quantum dots (QDs) by Cd 1-x Zn x Se shell in silicate glass was reported. An increase in the Se/Cd ratio can lead to the partial passivation of the surface states and appearance of the intrinsic emission of CdSe QDs. Optimizing the heat-treatment condition promotes the incorporation of Zn into CdSe QDs and results in the quenching of the defect emission. Formation of CdSe/Cd 1-x Zn x Se core/graded shell QDs is evidenced by the experimental results of TEM and Raman spectroscopy. Realization of the surface passivation and intrinsic emission of II-VI QDs may facilitate the wide applications of QDs doped all inorganic amorphous materials.

  3. Unusual negative magnetoresistance in Bi2Se3-ySy topological insulator under perpendicular magnetic field

    Science.gov (United States)

    Singh, Rahul; Gangwar, Vinod K.; Daga, D. D.; Singh, Abhishek; Ghosh, A. K.; Kumar, Manoranjan; Lakhani, A.; Singh, Rajeev; Chatterjee, Sandip

    2018-03-01

    The magneto-transport properties of Bi2Se3-ySy were investigated. Magnetoresistance (MR) decreases with an increase in the S content, and finally, for 7% (i.e., y = 0.21) S doping, the magnetoresistance becomes negative. This negative MR is unusual as it is observed when a magnetic field is applied in the perpendicular direction to the plane of the sample. The magneto-transport behavior shows the Shubnikov-de Haas (SdH) oscillation, indicating the coexistence of surface and bulk states. The negative MR has been attributed to the non-trivial bulk conduction.

  4. Soil Selenium (Se) Biofortification Changes the Physiological, Biochemical and Epigenetic Responses to Water Stress in Zea mays L. by Inducing a Higher Drought Tolerance.

    Science.gov (United States)

    Bocchini, Marika; D'Amato, Roberto; Ciancaleoni, Simona; Fontanella, Maria C; Palmerini, Carlo A; Beone, Gian M; Onofri, Andrea; Negri, Valeria; Marconi, Gianpiero; Albertini, Emidio; Businelli, Daniela

    2018-01-01

    Requiring water and minerals to grow and to develop its organs, Maize ( Zea mays L.) production and distribution is highly rainfall-dependent. Current global climatic changes reveal irregular rainfall patterns and this could represent for maize a stressing condition resulting in yield and productivity loss around the world. It is well known that low water availability leads the plant to adopt a number of metabolic alterations to overcome stress or reduce its effects. In this regard, selenium (Se), a trace element, can help reduce water damage caused by the overproduction of reactive oxygen species (ROS). Here we report the effects of exogenous Se supply on physiological and biochemical processes that may influence yield and quality of maize under drought stress conditions. Plants were grown in soil fertilized by adding 150 mg of Se (sodium selenite). We verified the effects of drought stress and Se treatment. Selenium biofortification proved more beneficial for maize plants when supplied at higher Se concentrations. The increase in proline, K concentrations and nitrogen metabolism in aerial parts of plants grown in Se-rich substrates, seems to prove that Se-biofortification increased plant resistance to water shortage conditions. Moreover, the increase of SeMeSeCys and SeCys2 forms in roots and aerial parts of Se-treated plants suggest resistance strategies to Se similar to those existing in Se-hyperaccumulator species. In addition, epigenetic changes in DNA methylation due to water stress and Se treatment were also investigated using methylation sensitive amplified polymorphism (MSAP). Results suggest that Se may be an activator of particular classes of genes that are involved in tolerance to abiotic stresses. In particular, PSY (phytoene synthase) gene, essential for maintaining leaf carotenoid contents, SDH (sorbitol dehydrogenase), whose activity regulates the level of important osmolytes during drought stress and ADH (alcohol dehydrogenase), whose activity

  5. Soil Selenium (Se) Biofortification Changes the Physiological, Biochemical and Epigenetic Responses to Water Stress in Zea mays L. by Inducing a Higher Drought Tolerance

    Science.gov (United States)

    Bocchini, Marika; D’Amato, Roberto; Ciancaleoni, Simona; Fontanella, Maria C.; Palmerini, Carlo A.; Beone, Gian M.; Onofri, Andrea; Negri, Valeria; Marconi, Gianpiero; Albertini, Emidio; Businelli, Daniela

    2018-01-01

    Requiring water and minerals to grow and to develop its organs, Maize (Zea mays L.) production and distribution is highly rainfall-dependent. Current global climatic changes reveal irregular rainfall patterns and this could represent for maize a stressing condition resulting in yield and productivity loss around the world. It is well known that low water availability leads the plant to adopt a number of metabolic alterations to overcome stress or reduce its effects. In this regard, selenium (Se), a trace element, can help reduce water damage caused by the overproduction of reactive oxygen species (ROS). Here we report the effects of exogenous Se supply on physiological and biochemical processes that may influence yield and quality of maize under drought stress conditions. Plants were grown in soil fertilized by adding 150 mg of Se (sodium selenite). We verified the effects of drought stress and Se treatment. Selenium biofortification proved more beneficial for maize plants when supplied at higher Se concentrations. The increase in proline, K concentrations and nitrogen metabolism in aerial parts of plants grown in Se-rich substrates, seems to prove that Se-biofortification increased plant resistance to water shortage conditions. Moreover, the increase of SeMeSeCys and SeCys2 forms in roots and aerial parts of Se-treated plants suggest resistance strategies to Se similar to those existing in Se-hyperaccumulator species. In addition, epigenetic changes in DNA methylation due to water stress and Se treatment were also investigated using methylation sensitive amplified polymorphism (MSAP). Results suggest that Se may be an activator of particular classes of genes that are involved in tolerance to abiotic stresses. In particular, PSY (phytoene synthase) gene, essential for maintaining leaf carotenoid contents, SDH (sorbitol dehydrogenase), whose activity regulates the level of important osmolytes during drought stress and ADH (alcohol dehydrogenase), whose activity

  6. Soil Selenium (Se Biofortification Changes the Physiological, Biochemical and Epigenetic Responses to Water Stress in Zea mays L. by Inducing a Higher Drought Tolerance

    Directory of Open Access Journals (Sweden)

    Marika Bocchini

    2018-03-01

    Full Text Available Requiring water and minerals to grow and to develop its organs, Maize (Zea mays L. production and distribution is highly rainfall-dependent. Current global climatic changes reveal irregular rainfall patterns and this could represent for maize a stressing condition resulting in yield and productivity loss around the world. It is well known that low water availability leads the plant to adopt a number of metabolic alterations to overcome stress or reduce its effects. In this regard, selenium (Se, a trace element, can help reduce water damage caused by the overproduction of reactive oxygen species (ROS. Here we report the effects of exogenous Se supply on physiological and biochemical processes that may influence yield and quality of maize under drought stress conditions. Plants were grown in soil fertilized by adding 150 mg of Se (sodium selenite. We verified the effects of drought stress and Se treatment. Selenium biofortification proved more beneficial for maize plants when supplied at higher Se concentrations. The increase in proline, K concentrations and nitrogen metabolism in aerial parts of plants grown in Se-rich substrates, seems to prove that Se-biofortification increased plant resistance to water shortage conditions. Moreover, the increase of SeMeSeCys and SeCys2 forms in roots and aerial parts of Se-treated plants suggest resistance strategies to Se similar to those existing in Se-hyperaccumulator species. In addition, epigenetic changes in DNA methylation due to water stress and Se treatment were also investigated using methylation sensitive amplified polymorphism (MSAP. Results suggest that Se may be an activator of particular classes of genes that are involved in tolerance to abiotic stresses. In particular, PSY (phytoene synthase gene, essential for maintaining leaf carotenoid contents, SDH (sorbitol dehydrogenase, whose activity regulates the level of important osmolytes during drought stress and ADH (alcohol dehydrogenase, whose

  7. Characterization of the structural and optical properties of CuIn{sub 1−x}Ga{sub x}Se{sub 2} QJ;thin films by X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Ya-Fen, E-mail: yfwu@mail.mcut.edu.tw [Department of Electronic Engineering, Ming Chi University of Technology, New Taipei City 243, Taiwan (China); Hsu, Hung-Pin [Department of Electronic Engineering, Ming Chi University of Technology, New Taipei City 243, Taiwan (China); Chen, Hung-Ing [Department of Electronic Engineering, Chang Gung University, Taoyuan 333, Taiwan (China)

    2013-10-15

    The structural and optical properties of Cu-poor CuIn{sub 1−x}Ga{sub x}Se{sub 2} thin films with different gallium contents grown using the co-evaporated technique were studied. Measurements of X-ray diffraction (XRD), temperature-dependent photoluminescence (PL), and photoreflectance (PR) were performed on the samples. The emission peaks in the PL spectra and PR spectra observed around 1.0–1.2 eV are attributed to donor–acceptor pairs and defect-related luminescence. With increasing gallium content, the linewidths of the luminescence spectra for the samples become wider, which we attribute to greater statistical disordering between indium and gallium. The structural properties of the CuIn{sub 1−x}Ga{sub x}Se{sub 2} thin films are further characterized by simulation of the XRD spectra with a theoretical model. It is found that the sample with higher gallium content exhibits less uniformity of microstructure size. The X-ray diffraction line profile analysis also shows a stronger internal strain in the sample with the higher gallium content, which is consistent with its broader microstructure size distribution. The conversion efficiency of the CuIn{sub 1−x}Ga{sub x}Se{sub 2}-based solar cells is also obtained and investigated through theoretical analysis. The experimental results coincide with the inferences given by the X-ray diffraction line profile analysis. -- Highlights: • Co-evaporated CuIn{sub 1−x}Ga{sub x}Se{sub 2} thin films with different gallium contents were studied. • XRD line profiles from the samples are analyzed by a theoretical model. • Less size uniformity and higher internal strain are obtained for high gallium sample. • The efficiency of CIGS solar cells is investigated through theoretical analysis. • The inferences from XRD spectra analysis coincide with experimental measurements.

  8. The challenge of increasing vitamin C content in plant foods.

    Science.gov (United States)

    Cruz-Rus, Eduardo; Amaya, Iraida; Valpuesta, Victoriano

    2012-09-01

    The term "vitamin" is used to define a number of organic compounds that have to be obtained from different foods because the organism itself cannot synthesize them in the quantities needed to sustain life. Vitamin C is the common name for L-ascorbic acid. In humans, the principal role of this molecule is to scavenge reactive oxygen species, due to its antioxidant capacity, and to serve as cofactor for many enzymes. A deficiency of L-ascorbic acid is traditionally linked to human diseases such as scurvy. Plant foods are the principal source of L-ascorbic acid for humans. There is a high variability of L-ascorbic acid content in the various plant organs that are used for human consumption. This diversity is related to the specific functions played by L-ascorbic acid in the different plant tissues. The net content of L-ascorbic acid in plants is determined through a balance of the activities of different biosynthetic, recycling, and catabolic pathways. Here we review the importance of L-ascorbic acid for human health, the current knowledge on its metabolism and function in plants, and the efforts that have already been made by genetic modification to improve its content in plant organs used for human food. We provide a current and forward looking perspective of how plant science can contribute to improving the L-ascorbic acid content in crop species using gene transformation, quantitative trait loci and association mapping-based approaches. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Possibility of using BeMgZnSe as a new cladding material for ZnSe-based blue laser diodes

    International Nuclear Information System (INIS)

    Kim, D. C.; Choi, J. H.; Yoo, K. H.; Kim, T. W.; Yao, T.

    1999-01-01

    We calculated the gain and the radiative recombination current density of ZnSe/Be x Mg y Zn 1-x-y Se/Be x Mg y Zn 1-x - y Se separate confinement heterostructure (SCH) laser diodes and compared the results with those for the more popular ZnSe/Zn 1-x Mg x S y Se 1-y /Zn 1-x Mg x S y Se 1-y system. For five different values of the cladding-layer energy gap (E g,c ), we sought the optimum SCH structure that had a minimum threshold current density for both quaternaries, and we compared the corresponding current densities. For the same E g,c , ZnMgSSe was found to have a smaller threshold current density. The threshold current density decreased rapidly with increasing. E g,c in both materials. Therefore, if the available energy gap of the BeMgZnSe cladding is larger than that of ZnMGZnSSe, BeMgZnSe may be the better choice

  10. Selenium Accumulation in Unicellular Green Alga Chlorella vulgaris and Its Effects on Antioxidant Enzymes and Content of Photosynthetic Pigments

    Science.gov (United States)

    Sun, Xian; Zhong, Yu; Huang, Zhi; Yang, Yufeng

    2014-01-01

    The aim of the present study was to investigate selenite effects in the unicellular green algae Chlorella vulgaris as a primary producer and the relationship with intracellular bioaccumulation. The effects of selenite were evaluated by measuring the effect of different selenite concentrations on algal growth during a 144 h exposure period. It was found that lower Se concentrations (≤75 mg L−1) positively promoted C. vulgaris growth and acted as antioxidant by inhibiting lipid peroxidation (LPO) and intracellular reactive oxygen species (ROS). The antioxidative effect was associated with an increase in guaiacol peroxidase (GPX), catalase (CAT), superoxide dismutase (SOD) and photosynthetic pigments. Meanwhile, significant increase in the cell growth rate and organic Se content was also detected in the algae. In contrast, these changes were opposite in C. vulgaris exposed to Se higher than 100 mg L−1. The antioxidation and toxicity appeared to be correlated to Se bioaccumulation, which suggests the appropriate concentration of Se in the media accumulation of C. vulgaris should be 75 mg L−1. Taken together, C. vulgaris possesses tolerance to Se, and Se-Chlorella could be developed as antioxidative food for aquaculture and human health. PMID:25375113

  11. Green synthesis of ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) using a new, rapid and room temperature photochemical approach

    Energy Technology Data Exchange (ETDEWEB)

    Molaei, M., E-mail: m.molaei@vru.ac.ir; Bahador, A.R.; Karimipour, M.

    2015-10-15

    In this work, ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) were synthesized using a one-pot, rapid and room temperature photochemical method. UV illumination provided the required energy for the chemical reactions. Synthesized NCs were characterized using X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence (PL) spectroscopy. XRD pattern indicated cubic zinc blende structure for ZnSe NCs and the TEM image indicated round-shaped particles, most of which had a diameter of about 3 nm. Band gap of ZnSe NCs was obtained as about 3.6 eV, which was decreased by increasing the illumination time. Synthesized NCs indicated intensive and narrow emission in the UV-blue area (370 nm) related to the excitonic recombination and a broad band emission with a peak located at about 490 nm originated from the DAP (donor–acceptor pairs) recombination. ZnS shell was grown on ZnSe cores using a reaction based on the photo-sensitivity of Na{sub 2}S{sub 2}O{sub 3}. For ZnSe@ZnS core–shell NCs, XRD diffraction peaks shifted to higher angles. TEM image indicated a shell around cores and most of the ZnSe@ZnS NCs have a diameter of about 5 nm. After the ZnS growth, ZnSe excitonic emission shifted to the longer wavelength and PL intensity was increased considerably. PL QY was obtained about 11% and 17% for ZnSe and ZnSe@ZnS core–shell QDs respectively. - Highlights: • A green photochemical approach was reported for synthesis of ZnSe NCs. • ZnS shell was grown around ZnSe using a new method. • Synthesis method was rapid, simple and at room temperature. • ZnSe NCs indicated a narrow UV-blue and a broad DAP emissions. • PL intensity was increased considerably by ZnS shell growth.

  12. Opportunities and challenges for a sustainable energy policy in SE Europe: SE European Energy Community Treaty

    International Nuclear Information System (INIS)

    Mihajlov, Andjelka

    2010-01-01

    Energy demand continues to increase in turn raising concerns about energy supply. In this paper, the author has tried to systematize the role of the energy sector in South Eastern (SE) Europe in the context of the European energy policy process. This should make the energy sector in SE Europe more visible and open to substantial activities and appropriate funding. This is important to assure its full alignment with the European energy policy process, and in so doing, make it less fragile. According to the SE European Energy Community Treaty, parties to the Treaty are obliged to implement reforms in the energy and environmental sector in accordance with the European Union's respective policy. This paper raises awareness of the environmental requirements that have been set, of renewable energy and its implementation, at the same time pointing out that the response in SE Europe has been at a low level. It is believed that this paper could draw attention to the existing problems and could contribute to the establishment of a common integrated energy market in SE Europe and the EU. (author)

  13. Changes in SeMSC, glucosinolates and sulforaphane levels, and in proteome profile in broccoli (Brassica oleracea var. Italica) fertilized with sodium selenate.

    Science.gov (United States)

    Sepúlveda, Ignacio; Barrientos, Herna; Mahn, Andrea; Moenne, Alejandra

    2013-05-07

    The aim of this work was to analyze the effect of sodium selenate fortification on the content of selenomethyl selenocysteine (SeMSC), total glucosinolates and sulforaphane, as well as the changes in protein profile of the inflorescences of broccoli (Brassica oleracea var. Italica). Two experimental groups were considered: plants treated with 100 μmol/L sodium selenate (final concentration in the pot) and control plants treated with water. Fortification began 2 weeks after transplantation and was repeated once a week during 10 weeks. Broccoli florets were harvested when they reached appropriate size. SeMSC content in broccoli florets increased significantly with sodium selenate fortification; but total glucosinolates and sulforaphane content as well as myrosinase activity were not affected. The protein profile of broccoli florets changed due to fortification with sodium selenate. Some proteins involved in general stress-responses were up-regulated, whereas down-regulated proteins were identified as proteins involved in protection against pathogens. This is the first attempt to evaluate the physiological effect of fortification with sodium selenate on broccoli at protein level. The results of this work will contribute to better understanding the metabolic processes related with selenium uptake and accumulation in broccoli.

  14. Changes in SeMSC, Glucosinolates and Sulforaphane Levels, and in Proteome Profile in Broccoli (Brassica oleracea var. Italica Fertilized with Sodium Selenate

    Directory of Open Access Journals (Sweden)

    Alejandra Moenne

    2013-05-01

    Full Text Available The aim of this work was to analyze the effect of sodium selenate fortification on the content of selenomethyl selenocysteine (SeMSC, total glucosinolates and sulforaphane, as well as the changes in protein profile of the inflorescences of broccoli (Brassica oleracea var. Italica. Two experimental groups were considered: plants treated with 100 mmol/L sodium selenate (final concentration in the pot and control plants treated with water. Fortification began 2 weeks after transplantation and was repeated once a week during 10 weeks. Broccoli florets were harvested when they reached appropriate size. SeMSC content in broccoli florets increased significantly with sodium selenate fortification; but total glucosinolates and sulforaphane content as well as myrosinase activity were not affected. The protein profile of broccoli florets changed due to fortification with sodium selenate. Some proteins involved in general stress-responses were up-regulated, whereas down-regulated proteins were identified as proteins involved in protection against pathogens. This is the first attempt to evaluate the physiological effect of fortification with sodium selenate on broccoli at protein level. The results of this work will contribute to better understanding the metabolic processes related with selenium uptake and accumulation in broccoli.

  15. Changes in sugar content and related enzyme activities in table grape (Vitis vinifera L.) in response to foliar selenium fertilizer.

    Science.gov (United States)

    Zhu, Shuaimeng; Liang, Yinli; An, Xiaojuan; Kong, Fanchao; Gao, Dekai; Yin, Hongfei

    2017-09-01

    Spraying selenium (Se) fertilizer is an effective method for Se-enriched fruit production. Sugar content in fruit is the major factor determining berry quality. However, changes in sugar metabolism in response to Se fertilizer are unclear. Hence, this study was conducted to identify the effects of Se fertilizer on sugar metabolism and related enzyme activities of grape berries. Additionally, production of leaves with and without Se fertilizer was also investigated. Acid invertase (AI) activity, total soluble sugar and Se content in berries, and photosynthetic rate in leaves produced under Se fertilizer treatments were higher than that of control. Glucose and fructose were the primary sugars in berries, with a trace of sucrose. In both berries and leaves, neutral invertase activity was lower than AI, there was no significant difference in neutral invertase, sucrose synthase and sucrose phosphate synthase between Se fertilizer-treated and control. In berries, AI showed a significant positive correlation with glucose and fructose; also Se content was significantly correlated with sugar content. AI played an important role in the process of sugar accumulation in berries; high AI activity in berries and photosynthetic rate in leaves could explain the mechanism by which Se fertilizer affected sugar accumulation in berries. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  16. Late Holocene evolution and increasing pollution in Guanabara Bay, Rio de Janeiro, SE Brazil

    International Nuclear Information System (INIS)

    Vilela, Claudia Gutterres; Figueira, Brígida Orioli; Macedo, Mariana Cardoso; Baptista Neto, José Antonio

    2014-01-01

    Highlights: • Foraminifera along the cores confirmed increasing of pollution toward the present. • Foraminifera correlated studies inferred loss of old mangrove systems. • Radiocarbon dates integrated to sediment rates marked the European settlement. • Ammonia tepida is dominant at upper intervals, as a human pollution bioindicator. • Buliminella elegantissima was dominant at core deeper samples before the discovery by Europeans. - Abstract: To detect changes during the Late Holocene and historical periods in Guanabara Bay, the paleoecological and ecological parameters from nine cores were analysed using foraminiferal assemblages and bioindicators. Using radiocarbon dates and sedimentation rates in the cores, it was possible to detect the first Europeans’ arrival in the 16th century. Foraminiferal bioindicators of organic matter and human pollution were correlated with radiocarbon dates from the bottom and middle of the cores in each region and revealed an increase in pollution along the cores. The foraminiferal results were compared with total organic carbon (TOC) values before, during and after European settlement and showed a historical increase in organic matter. Pristine mangrove ecosystems are characterised by agglutinated species such as Ammotium salsum, and the presence of this organism also confirmed the extent of historical mangrove forests. Ammonia tepida, Buliminella elegantissima and Elphidium excavatum were the dominant species, but they presented distinct patterns over time. B. elegantissima was dominant before the European influence in older sediments with high organic matter content that were found at deeper intervals. A. tepida is dominant in younger sediments at upper intervals, as a bioindicator of human pollution

  17. The dietary inclusion of Portulaca oleracea to the diet of laying hens increases the n-3 fatty acids content and reduces the cholesterol content in the egg yolk

    Directory of Open Access Journals (Sweden)

    Igino Andrighetto

    2010-01-01

    Full Text Available The effect of n-3 polyunsaturated fatty acids (PUFA-enriched diet on yolk fatty acid profile and cholesterol content was evaluated. Dried Poutulaca oleracea (purslane: PO diet was added to a commercial diet (C diet at 20% of inclusion level. The effect of the supplemented diet was compared to that of C diet. Twenty-six laying hens were fed ad libitum for 21 days with the 2 diets, supplemented also with 300 mg α-tocopherol acetate/kg. Eggs were collected and then the fatty acids (FA profile and the cholesterol content were analysed. The PO diet significantly reduced the saturated FA content (P<0.05 and increased that of the polyunsaturated FA (PUFA: 18:2 n-6 (P<0.001, 18:3 n-3 (P<0.001 and 22:6 n-3 (DHA; P<0.01. Both n-6 and n-3 PUFA significantly increased with the PO diet and the n-6/n-3 ratio was improved (10.4 vs 11.3; P<0.05.

  18. CdSe-based quantum dot nanostructures: MBE growth, properties and applications

    International Nuclear Information System (INIS)

    Ivanov, S.V.

    2004-01-01

    The paper presents an overview of the recent results of novel CdSe quantum dot (QD) fabrication techniques with the main emphasis on a stressor-controlled self-organization process resulting in nucleation of the optically active up to room temperature real CdSe QDs with a narrower size distribution, a higher density and a high Cd content. The main idea of the stressor-controlled epitaxy is the intentional introduction of a super-strained fractional monolayer of a much higher lattice-mismatch compound - stressor - to create strong local stress fields on the growth surface which govern self-assembling of the main QD material. The studies were performed on a type-II non-common atom CdSe/BeTe system, where CdTe (Δa/a∼14%) and BeSe (Δa/a∼-10%) interface bonds play the role of intrinsic stressors. Both experimental data (growth, structural and optical characterization) and Monte Carlo simulation of the growth process are presented

  19. [Increasing reductant NADPH content via metabolic engineering of PHB synthesis pathway in Synechocystis sp. PCC 6803].

    Science.gov (United States)

    Xie, Juan; Zhou, Jie; Zhang, Haifeng; Li, Yin

    2011-07-01

    Cyanobacteria have become attractive hosts for renewable chemicals production. The low productivity, however, prevents it from industrial application. Reductant NAD(P)H availability is a chief hurdle for the production of reductive metabolites in microbes. To increase NADPH content in Synechocystis sp. PCC 6803, PHB synthase encoding gene phaC and phaE in Synechocystis was inactivated by replacing phaC&E genes with chloromycetin resistance cassette via homologous recombination. PCR analysis showed that mutant S.delta phaC&E with complete genome segregation was generated. The comparison between growth curves of S.wt and S.delta phaC&E indicated the knockout of phaC & phaE genes did not affect obviously the cell growth. Gas chromatography analysis showed that the accumulation of PHB in wild type was about 2.3% of the dry cell weight, whereas no PHB was detected in the mutant S.delta phaC&E. The data indicated that inactivation of PHB synthase gene phaC and phaE interrupted the synthesis of PHB. Further comparative study of wild type and mutant demonstrated that NADPH content in S.delta phaC&E was obviously increased. On the third day, the NADPH content in S.delta phaC&E was up to 1.85 fold higher than that in wild type. These results indicated that deleting PHB synthase gene phaC and phaE not only can block the synthesis of PHB, but also can save NADPH to contribute reductant sink in cyanobacteria. Hence, the engineered cyanobacterial strain S.delta phaC&E, in which carbon flux was redirected and NADPH was increased, will be a potential host strain for chemicals production in cyanobacteria.

  20. Expression of Beta-glucosidase increases trichome density and artemisinin content in transgenic Artemisia annua plants

    Science.gov (United States)

    Singh, Nameirakpam Dolendro; Kumar, Shashi; Daniell, Henry

    2015-01-01

    Artemisinin is highly effective against multidrug-resistant strains of Plasmodium falciparum, the etiological agent of the most severe form of malaria. However, a low level of accumulation of artemisinin in Artemisia annua is a major limitation for its production and delivery to malaria endemic areas of the world. While several strategies to enhance artemisinin have been extensively explored, enhancing storage capacity in trichome has not yet been considered. Therefore, trichome density was increased with the expression of β glucosidase (bgl1) gene in A. annua through Agrobacterium-mediated transformation. Transgene (bgl1) integration and transcript was confirmed by molecular analysis. Trichome density increased up to 20% in leaves and 66% in flowers of BGL1 transgenic plants than Artemisia control plants. High-performance liquid chromatography (HPLC, MS-TOF) data showed that artemisinin content increased up to 1.4% in leaf and 2.56% in flowers (g-1DW), similar to the highest yields achieved so far through metabolic engineering. Artemisinin was enhanced up to 5-fold in BGL1 transgenic flowers. The present study opens the possibility of increasing artemisinin content by manipulating trichomes density, which is a major reservoir of artemisinin. Combining biosynthetic pathway engineering with enhancing trichome density may further increase artemisinin yield in A. annua. Because oral feeding of Artemisia plant cells reduced parasitemia more efficiently than the purified drug, reduced drug resistance and cost of prohibitively expensive purification process, enhanced expression should play a key role in making this valuable drug affordable to treat malaria in a large global population that disproportionally impacts low-socioeconomic areas and underprivileged children. PMID:26360801

  1. Effect of Increasing Total Solids Contents on Anaerobic Digestion of Food Waste under Mesophilic Conditions: Performance and Microbial Characteristics Analysis

    OpenAIRE

    Yi, Jing; Dong, Bin; Jin, Jingwei; Dai, Xiaohu

    2014-01-01

    The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste...

  2. Real-time in-situ monitoring of the topotactic transformation of TlCu{sub 3}Se{sub 2} into TlCu{sub 2}Se{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Ångström, J.; Sahlberg, M.; Berger, R.

    2015-07-15

    Highlights: • Topotactic transition from TlCu{sub 3}Se{sub 2} to TlCu{sub 2}Se{sub 2} followed in situ. • Synchrotron radiation X-ray powder diffraction enabled short scans. • Relative abundance of phases refined from powder data. • Opens up for studying similar systems in the same manner. - Abstract: The solid state transformation of monoclinic TlCu{sub 3}Se{sub 2} into tetragonal TlCu{sub 2}Se{sub 2} by oxidative copper leaching in concentrated ammonia solution has been studied in situ by the use of synchrotron radiation. The diffraction patterns of parent and daughter phase are both sharp, indicating a strong topotactic relationship between them that effectuates a rapid change by “chimie douce” performed at +19 °C. The transformation rate is strongly connected to the access of oxygen from the surrounding air. The transformation was followed in a real-time mode, being almost complete after 2.5 h with 1 h incubation due to low oxygen content, as shown from refining the diffraction patterns by Rietveld profile technique.

  3. Electrical properties of carbon nanotubes modified GaSe glassy system

    Science.gov (United States)

    Khan, Hana; Khan, Zubair M. S. H.; Islam, Shama; Rahman, Raja Saifu; Husain, M.; Zulfequar, M.

    2018-05-01

    In this paper we report the investigation of the effect of Carbon Nanotubes (CNT) addition on the electrical properties of GaSe Glassy system. Dielectric constant and dielectric loss of GaSe glassy system are found to increase on CNT addition. The conductivity of GaSe glasy systems is also found to increase on CNT addition. This behavior is attributed to the excellent conduction properties of Carbon Nanotube.

  4. Facile synthesis of CsPbBr3/PbSe composite clusters

    OpenAIRE

    Nguyen, Thang Phan; Ozturk, Abdullah; Park, Jongee; Sohn, Woonbae; Lee, Tae Hyung; Jang, Ho Won; Kim, Soo Young

    2017-01-01

    Abstract In this work, CsPbBr3 and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr3 quantum dots modified the electronic structure of CsPbBr3, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr3 perovskite quantum dots was modified from green to blue by increasing the Se ratio ...

  5. Glass formation and the third harmonic generation of Cu2Se–GeSe2–As2Se3 glasses

    International Nuclear Information System (INIS)

    Reshak, A. H.; Klymovych, O. S.; Zmiy, O. F.; Myronchuk, G. L.; Zamuruyeva, O. V.; Alahmed, Z. A.; Chyský, J.; Bila, Jiri; Kamarudin, H.

    2014-01-01

    We have performed the investigation of the nonlinear optical properties namely the third harmonic generation (THG) of the glass-formation region in the Cu 2 Se–GeSe 2 –As 2 Se 3 system. The samples were synthesized by direct single-temperature method from high-purity elementary substances. We have found that the value of disorder parameter Δ depends on the composition of the glassy alloys. The measurements show that increasing the Cu 2 Se concentration leads to increased slope of the absorption edge, which may be explained by the decrease of the height of random potential relief for the electrons in the tails of the state density which border the band edges. A very sharp increase in the THG at low temperature was observed. Significant enhancement in THG was obtained with decreasing the energy gap, which agreed well with the nonlinear optical susceptibilities obtained from other glasses.

  6. Layered MoSe2/Bi2WO6 composite with P-N heterojunctions as a promising visible-light induced photocatalyst

    Science.gov (United States)

    Xie, Taiping; Liu, Yue; Wang, Haiqiang; Wu, Zhongbiao

    2018-06-01

    In this paper, layered MoSe2/Bi2WO6 composites were fabricated by a simple bath sonication method for photocatalytic applications. Their photocatalytic performances were then investigated via the photocatalytic oxidation of gaseous toluene under visible-light irradiation. As a result, 1.5%-MoSe2/Bi2WO6 catalyst showed the highest activity with a degradation rate of nearly 80% during three-hour visible-light irradiation. The k value determined of 1.5%-MoSe2/Bi2WO6 was approximately 6 times higher than that of pure Bi2WO6 and 7 times higher compared with pure MoSe2. After a series of characterizations, it was concluded that the p-n heterojunctions of MoSe2/Bi2WO6 composites with strong interlayer interactions could effectively prolong the life time of photoinduced electron-hole pairs. And both the contents of surface superoxide and hydroxyl radicals were thereby increased, benefitting the photocatalytic process. Furthermore, the hydroxyl radicals and holes were found to be the major active species. This work provided a way to design photocatalyst with enhanced visible-light driven photoactivity toward indoor air pollutants purification.

  7. Electric field gradient studies in SnSe

    Energy Technology Data Exchange (ETDEWEB)

    Pal, G. [IUC, DAE Facilities (India); Sebastian, K.C. [M.S. University, Physics Department (India); Chintalapudi, S.N. [IUC, DAE Facilities (India); Somayajulu, D.R.S. [M.S. University, Physics Department (India)

    1999-09-15

    The EFG in IV-VI compound semiconductor SnSe was studied using two hyperfine interaction techniques, namely, TDPAC and Moessbauer spectroscopy. The EFG in this material increases sharply up to 300 K and thereafter at higher temperatures it gets saturated. However, the conductivity increases steadily at all the temperatures. The conductivity curve has two slopes. The first portion is due to the population of shallow Cd acceptor levels. Thus, in SnSe also the variation of the EFG with temperature is complex, as in other medium-gap semiconductors.

  8. Electric field gradient studies in SnSe

    International Nuclear Information System (INIS)

    Pal, G.; Sebastian, K.C.; Chintalapudi, S.N.; Somayajulu, D.R.S.

    1999-01-01

    The EFG in IV-VI compound semiconductor SnSe was studied using two hyperfine interaction techniques, namely, TDPAC and Moessbauer spectroscopy. The EFG in this material increases sharply up to 300 K and thereafter at higher temperatures it gets saturated. However, the conductivity increases steadily at all the temperatures. The conductivity curve has two slopes. The first portion is due to the population of shallow Cd acceptor levels. Thus, in SnSe also the variation of the EFG with temperature is complex, as in other medium-gap semiconductors

  9. Exploring the doping effects of Ag in p-type PbSe compounds with enhanced thermoelectric performance

    International Nuclear Information System (INIS)

    Wang Shanyu; Zheng Gang; Luo Tingting; She Xiaoyu; Li Han; Tang Xinfeng

    2011-01-01

    In this study, we prepared a series of Ag-doped PbSe bulk materials by a melting-quenching process combined with a subsequent spark plasma sintering process, and systematically investigated the doping effects of Ag on the thermoelectric properties. Ag substitution in the Pb site does not introduce resonant levels near the valence band edge or detectable change in the density of state in the vicinity of the Fermi level, but moves the Fermi level down and increases the carrier concentration to a maximum value of ∼4.7 × 10 19 cm -3 which is still insufficient for heavily doped PbSe compounds. Nonetheless, the non-monotonic variation in carrier concentration with increasing Ag content indicates that Ag doping reaches the solution limit at ∼1.0% and the excessive Ag presumably acts as donors in the materials. Moreover, the large energy gap of the PbSe-based material wipes off significant 'roll-over' in the Seebeck coefficient at elevated temperatures which gives rise to high power factors, being comparable to p-type Te analogues. Consequently, the maximum ZT reaches ∼1.0 for the 1.5% Ag-doped samples with optimized carrier density, which is ∼70% improvement in comparison with an undoped sample and also superior to the commercialized p-type PbTe materials.

  10. Human circulating ribosomal DNA content significantly increases while circulating satellite III (1q12) content decreases under chronic occupational exposure to low-dose gamma- neutron and tritium beta-radiation

    Energy Technology Data Exchange (ETDEWEB)

    Korzeneva, Inna B., E-mail: inna.korzeneva@molgen.vniief.ru [Russian Federal Nuclear Center – All-Russian Research Institute of Experimental Physics (RFNC-VNIIEF) 607190 Sarov, 37 Mira ave., Nizhniy Novgorod Region (Russian Federation); Kostuyk, Svetlana V. [Research Centre for Medical Genetics, 115478 Moscow, 1 Moskvorechye str. (Russian Federation); Ershova, Elizaveta S. [Research Centre for Medical Genetics, 115478 Moscow, 1 Moskvorechye str. (Russian Federation); V. A. Negovsky Research Institute of General Reanimatology, Moscow, 107031 (Russian Federation); Skorodumova, Elena N.; Zhuravleva, Veronika F.; Pankratova, Galina V.; Volkova, Irina V.; Stepanova, Elena V. [Russian Federal Nuclear Center – All-Russian Research Institute of Experimental Physics (RFNC-VNIIEF) 607190 Sarov, 37 Mira ave., Nizhniy Novgorod Region (Russian Federation); Porokhovnik, Lev N. [Research Centre for Medical Genetics, 115478 Moscow, 1 Moskvorechye str. (Russian Federation); Veiko, Natalia N. [Research Centre for Medical Genetics, 115478 Moscow, 1 Moskvorechye str. (Russian Federation); V. A. Negovsky Research Institute of General Reanimatology, Moscow, 107031 (Russian Federation)

    2016-09-15

    Highlights: • A transcribed region of human ribosomal repeat is resistant to double-strand breaks in the environment of a raised endonuclease activity. • Hybridization-based techniques are preferable for the analysis of damaged and/or oxidized genomic fragments, rather than the qRT-PCR method. • A chronic exposure to the low-dose IR induces an elevation of the rDNA content in the human circulating cfDNA as compared to cellular DNA. • An exposure to IR entails a decrease of the level of the human circulating satellite III (1q12) as compared to cellular DNA (RsatIII index). • The RrDNA/RsatIII ratio is a potential marker of a chronic IR individual exposure. - Abstract: A single exposure to ionizing radiation (IR) results in an elevated cell-free DNA (cfDNA) content in the blood plasma. In this case, the cfDNA concentration can be a marker of the cell death in the organism. However, a chronic exposure to a low-dose IR enhances both the endonuclease activity and titer of antibodies to DNA in blood plasma, resulting in a decrease of the total concentration of circulating cfDNA in exposed people. In this case, the total cfDNA concentration should not be considered as a marker of the cell death in an exposed body. We assumed that a pool of the cfDNA circulating in the exposed people contains DNA fragments, which are resistant to a double-strand break formation in the environment of the elevated plasma endonuclease activity, and can be accumulated in the blood plasma. In order to test this hypothesis, we studied the content of GC-rich sequences (69%GC) of the transcribed region of human ribosomal repeat (rDNA), as well as the content of AT-rich repeat (63%AT) of satellite III (1q12) in the cfDNA samples obtained from 285 individuals. We have found that a chronic exposure to gamma-neutron radiation (N = 88) and tritium β-radiation (N = 88) evokes an increase of the rDNA content (RrDNA index) and a decrease of the satellite III content (RsatIII index) in the

  11. Human circulating ribosomal DNA content significantly increases while circulating satellite III (1q12) content decreases under chronic occupational exposure to low-dose gamma- neutron and tritium beta-radiation

    International Nuclear Information System (INIS)

    Korzeneva, Inna B.; Kostuyk, Svetlana V.; Ershova, Elizaveta S.; Skorodumova, Elena N.; Zhuravleva, Veronika F.; Pankratova, Galina V.; Volkova, Irina V.; Stepanova, Elena V.; Porokhovnik, Lev N.; Veiko, Natalia N.

    2016-01-01

    Highlights: • A transcribed region of human ribosomal repeat is resistant to double-strand breaks in the environment of a raised endonuclease activity. • Hybridization-based techniques are preferable for the analysis of damaged and/or oxidized genomic fragments, rather than the qRT-PCR method. • A chronic exposure to the low-dose IR induces an elevation of the rDNA content in the human circulating cfDNA as compared to cellular DNA. • An exposure to IR entails a decrease of the level of the human circulating satellite III (1q12) as compared to cellular DNA (RsatIII index). • The RrDNA/RsatIII ratio is a potential marker of a chronic IR individual exposure. - Abstract: A single exposure to ionizing radiation (IR) results in an elevated cell-free DNA (cfDNA) content in the blood plasma. In this case, the cfDNA concentration can be a marker of the cell death in the organism. However, a chronic exposure to a low-dose IR enhances both the endonuclease activity and titer of antibodies to DNA in blood plasma, resulting in a decrease of the total concentration of circulating cfDNA in exposed people. In this case, the total cfDNA concentration should not be considered as a marker of the cell death in an exposed body. We assumed that a pool of the cfDNA circulating in the exposed people contains DNA fragments, which are resistant to a double-strand break formation in the environment of the elevated plasma endonuclease activity, and can be accumulated in the blood plasma. In order to test this hypothesis, we studied the content of GC-rich sequences (69%GC) of the transcribed region of human ribosomal repeat (rDNA), as well as the content of AT-rich repeat (63%AT) of satellite III (1q12) in the cfDNA samples obtained from 285 individuals. We have found that a chronic exposure to gamma-neutron radiation (N = 88) and tritium β-radiation (N = 88) evokes an increase of the rDNA content (RrDNA index) and a decrease of the satellite III content (RsatIII index) in the

  12. Efeito do conteúdo e da natureza da lignina residual na eficiência e na seletividade do branqueamento com ozônio Effect of residual lignin content and nature on the efficiency and selectivity of ozone bleaching

    Directory of Open Access Journals (Sweden)

    Elenice Pereira Maia

    2003-04-01

    Full Text Available Neste estudo foram avaliados os efeitos do conteúdo e da natureza da lignina residual na eficiência e na seletividade do branqueamento com ozônio de polpa kraft convencional (kraft e pré-deslignificada com oxigênio (kraft-O. Constatou-se que a eficiência do branqueamento com ozônio se eleva com o aumento do conteúdo de lignina residual da polpa. O tratamento com ozônio é mais seletivo para polpas kraft-O, mas para um mesmo tipo de polpa a seletividade de branqueamento com ozônio se eleva com o aumento de lignina residual. A eficiência do branqueamento com ozônio aumenta com o teor de lignina fenólica na polpa, entretanto a seletividade é negativamente afetada pela presença destas estruturas.This study aimed to evaluate the effect of residual lignin content and nature on the efficiency and selectivity of ozone bleaching of conventional (kraft and oxygen delignified (kraft-O pulps. Ozone bleaching efficiency was found to be enhanced by increasing pulp residual lignin content. Ozone treatment is more selective for kraft-O pulps, but for a given type of pulp (kraft or kraft-O, ozone bleaching selectivity increases with increasing pulp lignin content. Ozone bleaching efficiency increases with increasing pulp lignin phenolic hydroxyl content whereas selectivity is negatively affected by these structures.

  13. Se interlayer in CIGS absorption layer for solar cell devices

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung-Kyu; Sim, Jae-Kwan [Semiconductor Materials Process Laboratory, School of Advanced Materials Engineering, Research Center for Advanced Materials Development, Chonbuk National University, Deokjin-Dong 664-14, Jeonju 561-756 (Korea, Republic of); Kissinger, N.J. Suthan [Department of General Studies, Physics Group, Jubail University College, Royal Commission for Jubail, Jubail 10074 (Saudi Arabia); Song, Il-Seok; Kim, Jin-Soo; Baek, Byung-Joon [Semiconductor Materials Process Laboratory, School of Advanced Materials Engineering, Research Center for Advanced Materials Development, Chonbuk National University, Deokjin-Dong 664-14, Jeonju 561-756 (Korea, Republic of); Lee, Cheul-Ro, E-mail: crlee7@jbnu.ac.kr [Semiconductor Materials Process Laboratory, School of Advanced Materials Engineering, Research Center for Advanced Materials Development, Chonbuk National University, Deokjin-Dong 664-14, Jeonju 561-756 (Korea, Republic of)

    2015-06-05

    Highlights: • Se interlayer is deposited between the CuGa and CuIn/In/Mo/STS stacked layer. • Both CIG precursor layers were selenized at 500 °C for 1 h. • SIMS depth profile shows that Ga distribution is uniform by Se interlayer. • The efficiency was improved for the CIGS solar cell by Se interlayer. - Abstract: A CIGS absorber layer with high gallium contents in the space-charge region can reduce the carrier recombination and improve the open circuit voltage V{sub oc}. Therefore, controlling Ga grading on top of CIGS thin film solar cells is the main objective of this experiment. To reduce Selenium (Se) vacancy, it is important that the diffusion of Ga elements into Se vacancy between Mo back contact and CIGS absorption layer would be controlled. In order to reduce Se vacancy and confirm Ga inter-diffusion, two CIGS solar cells were fabricated by converting CIG precursor with and without Se interlayer. The copper-indium metallic precursors were fabricated corresponding to the sequence CuIn/In/Mo/STS on stainless steel (STS) substrates by sequential direct current magnetron sputtering while Se layer was evaporated by rapid thermal annealing (RTA) system to obtain a Se/CuIn/In/Mo/STS stack. CuGa precursor layer was also fabricated on the Se/CuIn/In/Mo/STS stack. Finally, both CuGa/Se/CuIn/In/Mo/STS and CuGa/CuIn/In/Mo/STS stacks were selenized at 500 °C for 1 h. It was clearly observed from the secondary ion mass spectroscopy (SIMS) and X-ray diffraction (XRD) that there was a change between the fabricated CIGS absorption layers and the amount of Ga elements. Furthermore, the Ga elements gradually decreased from the top to the bottom layer of the CIGS absorption layer. We also discussed the effect of Se interlayer in the CIGS absorption layer and its influence on the solar cell’s performance.

  14. Se interlayer in CIGS absorption layer for solar cell devices

    International Nuclear Information System (INIS)

    Lee, Seung-Kyu; Sim, Jae-Kwan; Kissinger, N.J. Suthan; Song, Il-Seok; Kim, Jin-Soo; Baek, Byung-Joon; Lee, Cheul-Ro

    2015-01-01

    Highlights: • Se interlayer is deposited between the CuGa and CuIn/In/Mo/STS stacked layer. • Both CIG precursor layers were selenized at 500 °C for 1 h. • SIMS depth profile shows that Ga distribution is uniform by Se interlayer. • The efficiency was improved for the CIGS solar cell by Se interlayer. - Abstract: A CIGS absorber layer with high gallium contents in the space-charge region can reduce the carrier recombination and improve the open circuit voltage V oc . Therefore, controlling Ga grading on top of CIGS thin film solar cells is the main objective of this experiment. To reduce Selenium (Se) vacancy, it is important that the diffusion of Ga elements into Se vacancy between Mo back contact and CIGS absorption layer would be controlled. In order to reduce Se vacancy and confirm Ga inter-diffusion, two CIGS solar cells were fabricated by converting CIG precursor with and without Se interlayer. The copper-indium metallic precursors were fabricated corresponding to the sequence CuIn/In/Mo/STS on stainless steel (STS) substrates by sequential direct current magnetron sputtering while Se layer was evaporated by rapid thermal annealing (RTA) system to obtain a Se/CuIn/In/Mo/STS stack. CuGa precursor layer was also fabricated on the Se/CuIn/In/Mo/STS stack. Finally, both CuGa/Se/CuIn/In/Mo/STS and CuGa/CuIn/In/Mo/STS stacks were selenized at 500 °C for 1 h. It was clearly observed from the secondary ion mass spectroscopy (SIMS) and X-ray diffraction (XRD) that there was a change between the fabricated CIGS absorption layers and the amount of Ga elements. Furthermore, the Ga elements gradually decreased from the top to the bottom layer of the CIGS absorption layer. We also discussed the effect of Se interlayer in the CIGS absorption layer and its influence on the solar cell’s performance

  15. Expression of β-glucosidase increases trichome density and artemisinin content in transgenic Artemisia annua plants.

    Science.gov (United States)

    Singh, Nameirakpam Dolendro; Kumar, Shashi; Daniell, Henry

    2016-03-01

    Artemisinin is highly effective against multidrug-resistant strains of Plasmodium falciparum, the aetiological agent of the most severe form of malaria. However, a low level of accumulation of artemisinin in Artemisia annua is a major limitation for its production and delivery to malaria endemic areas of the world. While several strategies to enhance artemisinin have been extensively explored, enhancing storage capacity in trichome has not yet been considered. Therefore, trichome density was increased with the expression of β-glucosidase (bgl1) gene in A. annua through Agrobacterium-mediated transformation. Transgene (bgl1) integration and transcript were confirmed by molecular analysis. Trichome density increased up to 20% in leaves and 66% in flowers of BGL1 transgenic plants than Artemisia control plants. High-performance liquid chromatography, time of flight mass spectrometer data showed that artemisinin content increased up to 1.4% in leaf and 2.56% in flowers (per g DW), similar to the highest yields achieved so far through metabolic engineering. Artemisinin was enhanced up to five-fold in BGL1 transgenic flowers. This study opens the possibility of increasing artemisinin content by manipulating trichomes' density, which is a major reservoir of artemisinin. Combining biosynthetic pathway engineering with enhancing trichome density may further increase artemisinin yield in A. annua. Because oral feeding of Artemisia plant cells reduced parasitemia more efficiently than the purified drug, reduced drug resistance and cost of prohibitively expensive purification process, enhanced expression should play a key role in making this valuable drug affordable to treat malaria in a large global population that disproportionally impacts low-socioeconomic areas and underprivileged children. © 2015 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

  16. Production of Se-methylselenocysteine in transgenic plants expressing selenocysteine methyltransferase

    Directory of Open Access Journals (Sweden)

    Harris Hugh

    2004-01-01

    Full Text Available Abstract Background It has become increasingly evident that dietary Se plays a significant role in reducing the incidence of lung, colorectal and prostate cancer in humans. Different forms of Se vary in their chemopreventative efficacy, with Se-methylselenocysteine being one of the most potent. Interestingly, the Se accumulating plant Astragalus bisulcatus (Two-grooved poison vetch contains up to 0.6% of its shoot dry weight as Se-methylselenocysteine. The ability of this Se accumulator to biosynthesize Se-methylselenocysteine provides a critical metabolic shunt that prevents selenocysteine and selenomethionine from entering the protein biosynthetic machinery. Such a metabolic shunt has been proposed to be vital for Se tolerance in A. bisulcatus. Utilization of this mechanism in other plants may provide a possible avenue for the genetic engineering of Se tolerance in plants ideally suited for the phytoremediation of Se contaminated land. Here, we describe the overexpression of a selenocysteine methyltransferase from A. bisulcatus to engineer Se-methylselenocysteine metabolism in the Se non-accumulator Arabidopsis thaliana (Thale cress. Results By over producing the A. bisulcatus enzyme selenocysteine methyltransferase in A. thaliana, we have introduced a novel biosynthetic ability that allows the non-accumulator to accumulate Se-methylselenocysteine and γ-glutamylmethylselenocysteine in shoots. The biosynthesis of Se-methylselenocysteine in A. thaliana also confers significantly increased selenite tolerance and foliar Se accumulation. Conclusion These results demonstrate the feasibility of developing transgenic plant-based production of Se-methylselenocysteine, as well as bioengineering selenite resistance in plants. Selenite resistance is the first step in engineering plants that are resistant to selenate, the predominant form of Se in the environment.

  17. Preparation and characterization of polycrystalline n-CdSe photoelectrode

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, T. K.

    1979-01-01

    Thin layers of polycrystalline p-CdSe were prepared by the simultaneous eletrodeposition of cadmium and selenium from cadmium sulfate and selenious acid in a sulfuric acid solution at pH 0-1 on a titanium substrate. The adherence of the layers to the substrate, stoichiometric ratio of Cd:Se and photovoltaic property of the film depend upon the molar ratio of CdSO/sub 4/ and H/sub 2/SeO/sub 3/ and current density as well as on the pH and temperature of the electrolysis bath. On increasing the current density or the ratio of CdSO/sub 4/:H/sub 2/SeO/sub 3/ in the electrolysis bath, the Cd:Se of the electrodeposit increased. The semiconductor films so prepared were annealed at 550/sup 0/C in a nitrogen atmosphere, followed by etching in an acid solution and then used to construct the photo-electrochemical cell, Ti/CdSe/Na/sub 2/S-Na/sub 2/S/sub x/(aq.)/Pt, and the current-voltage curves have been studied. 11 references.

  18. Rice and Bean Targets for Biofortification Combined with High Carotenoid Content Crops Regulate Transcriptional Mechanisms Increasing Iron Bioavailability

    Directory of Open Access Journals (Sweden)

    Desirrê Morais Dias

    2015-11-01

    Full Text Available Iron deficiency affects thousands of people worldwide. Biofortification of staple food crops aims to support the reduction of this deficiency. This study evaluates the effect of combinations of common beans and rice, targets for biofortification, with high carotenoid content crops on the iron bioavailability, protein gene expression, and antioxidant effect. Iron bioavailability was measured by the depletion/repletion method. Seven groups were tested (n = 7: Pontal bean (PB; rice + Pontal bean (R + BP; Pontal bean + sweet potato (PB + SP; Pontal bean + pumpkin (PB + P; Pontal bean + rice + sweet potato (PB + R + P; Pontal bean + rice + sweet potato (PB + R + SP; positive control (Ferrous Sulfate. The evaluations included: hemoglobin gain, hemoglobin regeneration efficiency (HRE, gene expression of divalente metal transporter 1 (DMT-1, duodenal citocromo B (DcytB, ferroportin, hephaestin, transferrin and ferritin and total plasma antioxidant capacity (TAC. The test groups, except the PB, showed higher HRE (p < 0.05 than the control. Gene expression of DMT-1, DcytB and ferroportin increased (p < 0.05 in the groups fed with high content carotenoid crops (sweet potato or pumpkin. The PB group presented lower (p < 0.05 TAC than the other groups. The combination of rice and common beans, and those with high carotenoid content crops increased protein gene expression, increasing the iron bioavailability and antioxidant capacity.

  19. Gas flows in S-E binary systems of galaxies

    Science.gov (United States)

    Sotnikova, N. YA.

    1990-01-01

    Tidal interaction between the galaxies in binary systems leads to important consequences. Some peculiarities in galactic morphology as well as the transfer of matter from one galaxy to another may be due to this factor. In particular, gas flows in intergalactic space may be formed. Such flows enriching one component with gas from the other may play a substantial role in the evolution of mixed (S-E) pairs. One can mention several facts corroborating the possibility of the gas transfer from the spiral to the elliptical galaxy. High HI content (10(exp 7) to 10(exp 9) solar mass) is detected in nearly 40 E galaxies (Bottinelli and Gougenheim, 1979; Knapp et al., 1985). Such galaxies are often members of pairs or of multiple systems including an S galaxy, which may be the source of gas (Smirnov and Komberg, 1980). Moreover, the gas kinematics and its distribution also indicate an external origin for this gas (Knapp et al., 1985). In many cases there is an outer gaseous disk. The directions of the disk and of stellar rotation don't always coincide (van Gorkom et al., 1985; Varnas et al., 1987). The galaxy colors in S-E pairs are correlated (the Holmberg effect): bluer ellipticals have spiral components that are usually bluer (Demin et al., 1984). The fraction of E galaxies with emission lines (N sub em) in S-E pairs showing traces of tidal interaction is twice as large (N sub em approx. equals 0.24) as in pairs without interaction (N sub em approx. equals 0.12) (Sotnikova, 1988b). Since the presence of emission lines in a galaxy spectrum strongly depends on gas content, this fact also leads to the conclusion that ellipticals in interacting S-E pairs are enriched with gas. These facts may be considered as a serious indication of the existence of gas transfer. Hence, investigation of this process is of interest.

  20. Laser-induced luminescence of multilayer structures based on polyimides and CdSe and CdSe/ZnS nanocrystals

    International Nuclear Information System (INIS)

    Chistyakov, A A; Dayneko, S V; Zakharchenko, K V; Kolesnikov, V A; Tedoradze, M G; Mochalov, K E; Oleinikov, V A

    2009-01-01

    Laser-induced luminescence of multilayer structures based on the solids of CdSe and CdSe/ZnS nanocrystals, different organic semiconductors and on the layers of organic semiconductors with embedded nanocrystals has been investigated. Drastic decrease of luminescence quantum yield is observed in the films of CdSe nanocrystals on organic semiconductors compared to those on optical glasses. The luminescence of the nanocrystals in the matrices of organic semiconductors and in multilayer structures is shown to be suppressed. The effects observed are explained by the transfer of photogenerated carriers from the nanocrystals to the molecules of organic semiconductors. The presence of the charge transfer is confirmed by a drastic increase in the conductivity (by 2 – 4 orders of magnitude) and in photovoltaic effect at the presence of CdSe and CdSe/ZnS nanocrystals in the structures under investigation. The prospects of using the multilayer structures for development new materials for solar cells are discussed

  1. Consideration of Factors Affecting Strip Effluent PH and Sodium Content

    Energy Technology Data Exchange (ETDEWEB)

    Peters, T. [Savannah River Site (SRS), Aiken, SC (United States)

    2015-07-29

    A number of factors were investigated to determine possible reasons for why the Strip Effluent (SE) can sometimes have higher than expected pH values and/or sodium content, both of which have prescribed limits. All of the factors likely have some impact on the pH values and Na content.

  2. Increase in nitrite content and functionality of ethanolic extracts of Perilla frutescens following treatment with atmospheric pressure plasma.

    Science.gov (United States)

    Jung, Samooel; Lee, Chul Woo; Lee, Juri; Yong, Hae In; Yum, Su Jin; Jeong, Hee Gon; Jo, Cheorun

    2017-12-15

    This study investigated the effect of atmospheric pressure plasma (APP) treatment on nitrite content and functionality of plant extracts. Ethanolic extracts of Perilla frutescens (EEP) were prepared and treated with APP for 60min. Nitrite content increased from 0 to 45.8mg/l in EEP after APP treatment for 60min. Antimicrobial activity of EEP against Clostridium perfringens and Salmonella Typhimurium was increased by APP with no influence on antioxidative activity (p<0.05). Lyophilized EEP (LEEP) treated with APP for 60min contained 3.74mg/g nitrite. The control (LEEP without APP) contained no nitrite. The minimum inhibitory concentration (MIC) of LEEP for C. perfringens was 200µg/ml. The control did not inhibit C. perfringens growth between 25 and 1000µg/ml. MICs of LEEP and the control against S. Typhimurium were 25 and 50µg/ml, respectively. New nitrite sources with increased antimicrobial activity can be produced from natural plants by APP treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Investigations of the Connection between Vitamin E Deficiency and the Selenium Content in Animal Organs

    Energy Technology Data Exchange (ETDEWEB)

    Duftschmid, K. E. [Reaktor-Zentrum Seibersdorf (Austria); Leibetseder, J. [Tierarztliche Hochschule, Vienna (Austria)

    1967-10-15

    The highly toxic effects of selenium have been well known for a long time. Just ten years ago, however, the important role of Se in the prophylaxis of certain pathological symptoms, e.g. in the exudative diathesis of chickens, was recognized. In particular, the connection between Se and vitamin E has attracted considerable attention. Detailed feeding experiments with laboratory animals have shown some relation between the symptoms of vitamin E deficiency and Se, but up to now the underlying mechanisms have remained obscure. To contribute to clearing up these questions we have used activation analysis to determine whether a deficiency of vitamin E alters the Se content of certain typical organs. For this purpose 40 Cobb's one-day-old chicks were bred in batteries. One group was fed with vitamin-E-free standard diet; the other group was given the same diet but with an additive of 30 ppm of vitamin E. The Se content was 5 ppm in both cases. At an age of three weeks the chicks were killed and preparations of blood, plasma, cerebrum, cerebellum, pectoral muscle, liver, kidney and gonads were taken. In order to assay the Se content of some 600 preparations in a reasonable time a fast method of analysis was chosen using the 17. 5-s {sup 77m}Se. In this way the following advantages were obtained: (i) the short half-life and high activation cross-section made possible a high sensitivity even after very short irradiation times (20 s); (ii) problems arising from the matrix activity (mainly {sup 24}Na) were minimized and a chemical separation was unnecessary. To eliminate the critical influence of the half-life, each sample was irradiated and measured simultaneously with a Se standard using a multichannel analyser with an input facility for two detectors. The statistical evaluation of the measurements showed various interesting results. It was established that the Se content of certain organs is influenced by the vitamin E supply. Thus, the muscle preparations from vitamin

  4. Charge confinements in CdSe-ZnSe symmetric double quantum wells

    International Nuclear Information System (INIS)

    Tit, Nacir; Obaidat, Ihab M

    2008-01-01

    The bound states in the (CdSe) N w (ZnSe) N b (CdSe) N w -ZnSe(001) symmetric double quantum wells are investigated versus the well width (N w ) and the barrier thickness (N b ). A calculation based on the sp 3 s * tight-binding method which includes the spin-orbit interactions is employed to calculate the bandgap energy, quantum-confinement energy, and band structures. The studied systems possess a vanishing valence-band offset (VBO = 0) in consistency with the well known common-anion rule, and a large conduction-band offset (CBO ≅ 1 eV), which plays an essential role in the confinement of electrons within the CdSe wells. The biaxial strain, on the other hand, plays another role in confining the holes at the interfaces (within the well regions) and thus enhancing the radiative efficiency. The induced-strain energy is estimated to be ∼35 meV. More importantly, the results show that, for a fixed barrier thickness, the double wells are able to confine a pair of bound states when they are very thin. By increasing the wells' width (N w ), further, a new pair of states from the conduction-band continuum falls into the wells every time N w hits a multiple of four monolayers (more specifically, for 4n w ≤4(n+1), the number of bound states is 2(n+1), where n is an integer). On the other hand, the barrier thickness (N b ) is shown to have no effect on the number of bound states, but it solely controls their well-to-well interactions. A critical barrier thickness to switch off these latter interactions is estimated to occur at about N crit b ≅ 9 (L crit b ≅ 25∼AA. Rules governing the variation of the quantum-confinement energy versus both barrier thickness (N b ) and well width (N w ) have been derived. Our theoretical results are also shown to have excellent agreement with the available experimental photoluminescence data

  5. Dual-energy radiography of bone tissues using ZnSe-based scintielectronic detectors

    International Nuclear Information System (INIS)

    Grinyov, B.; Ryzhikov, V.; Lecoq, P.; Naydenov, S.; Opolonin, A.; Lisetskaya, E.; Galkin, S.; Shumeiko, N.

    2007-01-01

    Detectors of the scintillator-photodiode type were obtained on the basis of CsI(Tl), CdWO 4 and ZnSe(Te) crystals, and their comparative study was carried out, aiming at their use in X-ray computer tomography (CT). Because of their low afterglow level (10 ppm after 10 ms), CWO and ZnSe crystals are preferable for this application. A drawback of CWO is its lower (by 3 times) light output as compared with CsI(Tl). ZnSe has low transparence to intrinsic radiation; however, up to energies of 60-70 keV it is superior, as for the whole complex of its parameter, to materials traditionally used for CT detectors. The use of a dual-energy receiving-detecting circuit with a detector pair ZnSe/CsI or ZnSe/CdWO allows efficient distinction between muscular and bone tissues, which supports our earlier theoretical assumptions that this method could be successfully used for separate detection of materials differing in their effective atomic number Z eff and local density (e.g., calcium contents in bone densitometry)

  6. Increasing the calcium content of mealworms (Tenebrio molitor) to improve their nutritional value for bone mineralization of growing chicks.

    Science.gov (United States)

    Klasing, K C; Thacker, P; Lopez, M A; Calvert, C C

    2000-12-01

    The purpose of these studies was to determine the husbandry variables that optimize the Ca content of mealworms (Tenebrio molitor) and to determine the bioavailability of this Ca for bone mineralization in chicks that consume the mealworms. To determine the optimal level of Ca in the substrates used in short-term (mealworms and to determine the length of time that mealworms should be exposed to high-Ca substrates, mealworms were placed in either a wheat bran or a chicken starter substrate supplemented with 0, 4, 8, or 12% Ca from CaCO3. The mealworms were harvested after 0.5, 1, 2, 3, 4, 7, or 14 days. The Ca content of the mealworms was greatest with the use of chicken starter and increased linearly with the Ca content of the substrate. In general, the Ca content of the mealworms increased during the first 24 hr and decreased after > or = 1 wk, especially at the higher levels of Ca supplementation. The chicken starter also resulted in higher levels of vitamin D in mealworms. Mealworms held in wheat bran with 8% Ca were fed to growing chicks. Ca bioavailability was calculated from the chicks' bone ash. The Ca in these mealworms was 76% as bioavailable as the Ca in oyster shell.

  7. The reductive immobilization of aqueous Se(IV) by natural pyrrhotite

    International Nuclear Information System (INIS)

    Ma, Bin; Kang, Mingliang; Zheng, Zhong; Chen, Fanrong; Xie, Jinglin; Charlet, Laurent; Liu, Chunli

    2014-01-01

    Graphical abstract: - Highlights: • The reduction of aqueous Se(IV) by natural pyrrhotite can be described by a pseudo-first-order equation. • Phosphate can significantly inhibit Se(IV) reduction by natural pyrrhotite. • HS − and Fe 2+ dominate Se(IV) reduction by natural pyrrhotite at low and high pH, respectively. • Se(0) is formed following Se(IV) reduction by natural pyrrhotite. - Abstract: The interaction of Se(IV) with natural pyrrhotite was investigated at pH conditions ranging from acidic to nearly neutral. The results indicate that the reduction rate can be described in terms of a pseudo-first order reaction. At pH ∼4.0 to ∼5.0, the rate decreased with increasing pH. Unexpectedly, at pH ∼5.0, the rate increased with increasing reaction time. This response was also observed at pH ∼6.0. Two different reaction mechanisms were proposed to explain pyrrhotite oxidation by Se(IV). Because pyrrhotite is acid-soluble and can be attacked by both Fe 3+ and protons, direct reduction by the released aqueous sulfide dominates the reaction at low pH, whereas the cyclic oxidation of aqueous Fe 2+ adsorbed on pyrrhotite surfaces becomes predominant at high pH. Phosphate, which can be irreversibly bound to Fe 3+ intermediates even under acidic conditions, can significantly decrease the reaction rate by an order of magnitude at pH ∼4.5. In contrast to the thermodynamic calculations and the predicted prevalence of FeSe based on previous reports of aqueous Se(IV) reduction by synthetic mackinawite or troilite, only Se(0) was observed as the reaction product in this study. This observation confirmed that a slow reaction favors the formation of Se(0) rather than iron selenides

  8. Association of decrease in liver triglyceride content with increase in plasma adiponectin levels after pioglitazone treatment in Japanese patients with type 2 diabetes

    International Nuclear Information System (INIS)

    Nagasawa, Kan; Kaneko, Yoshihito; Taneichi, Haruhito

    2010-01-01

    Pioglitazone, an insulin-sensitizing thiazolidinedione, has multiple clinical effects including improvement of insulin sensitivity, blood glucose levels and serum lipid profiles, decrease in liver triglyceride (TG) content, and increase in serum adiponectin. However, the correlation and causal relationship between these effects are not fully understood clinically. Therefore, we analyzed these relationships in patients with type 2 diabetes treated with pioglitazone, focusing on changes in liver TG content and serum adiponectin. Thirteen Japanese patients with type 2 diabetes were treated with pioglitazone (15 mg/day) for more than 3 months. Before and after the pioglitazone treatment, liver TG content was measured by magnetic resonance spectroscopy and various clinical variables were also measured. The pioglitazone treatment significantly decreased the liver TG content (-12.9±8.1%, p 2 =0.53, p=0.017), implying increased serum adiponectin may have decreased liver fat content. (author)

  9. Stable and metastable phases in reciprocal systems PbSe + Ag2I2 Ag2Se + PbI2 and PbSe + CdI2 = CdSe + PbI2

    International Nuclear Information System (INIS)

    Odin, I.N.; Grin'ko, V.V.; Kozlovskij, V.F.; Safronov, E.V.

    2005-01-01

    Mutual system PbSe + Ag 2 I 2 = Ag 2 Se + PbI 2 is investigated. It is shown that diagonal Ag 2 Se-PbI 2 is stable. Liquidus surface and isothermal section at 633 K of phase diagram of PbSe-Ag 2 Se-PbI 2 system are built. Transformations directing to crystallization metastable ternary compound forming in PbSe-PbI 2 system and metastable polytype modifications of lead iodide in PbSe-Ag 2 Se-PbI 2 system at 620-685 K are studied. By hardening from molten state (1150-1220 K) new interstitial metastable phases crystallizing in CdCl 2 structural type are obtained in PbSe-Ag 2 Se-PbI 2 and PbSe + CdI 2 = CdSe + PbI 2 systems [ru

  10. Chevrel-phase solid solution Mo 6Se 8- xTe x. Study of its superconducting, magnetic and NMR properties

    Science.gov (United States)

    Hamard1a, C.; Auffret, V.; Peña, O.; Le Floch, M.; Nowak, B.; Wojakowski, A.

    2000-09-01

    The Chevrel-phase solid solution Mo 6Se 8-Mo 6Te 8 was studied by X-ray diffraction, AC and DC magnetic susceptibility and 77Se and 125Te NMR spectroscopy. From the smooth evolution of the lattice parameters and superconducting critical temperatures, a progressive substitution of selenium atoms by tellurium is shown, on the whole range of composition 0⩽ x⩽8, in the formulation Mo 6Se 8- xTe x: the unit-cell volume increases linearly because of the larger ionic size of tellurium, while Tc decreases rapidly (from 6.45 down to 0 K) because of the different formal oxidation states of the anions and a probable evolution of the Fermi level in the density of states. Results of magnetic susceptibility support this model and suggest the inhibition of the intrinsic metallic behavior with increasing x. The NMR spectra of the binaries Mo 6Se 8 and Mo 6Te 8 reveal two significant features, attributed to two different chalcogen positions in the R 3¯ symmetry. At low Se contents in Mo 6Se 8- xTe x ( x=7.5, 7 and 6), selenium first fills the two X(2) sites along the three-fold axis (2c positions), and then it becomes statistically distributed over the general 6f positions, leading to broad 77Se NMR lines. On the other hand, substitution of Te atoms in Mo 6Se 8 seems to occur in a random way, creating large perturbations on the 125Te NMR spectra, over the whole range of x. Theoretical analysis based on the presence of two anisotropic lines (of axial and non-axial symmetries, respectively) allowed us to estimate their anisotropy factors and to perfectly simulate the frequency response of both Mo 6Se 8 and Mo 6Te 8 binaries. Analysis of the Knight shift anisotropy leads us to conclude about the importance of the molybdenum z 2 molecular orbital contribution which controls the Mo-X dipolar interactions.

  11. Photoelectrochemical (PEC) studies on CdSe thin films ...

    Indian Academy of Sciences (India)

    TECS

    Thin films of CdSe were deposited by potentiostatic mode on different substrates such as ... trodeposited from aqueous acidic baths, but very few ... washed with liquid detergent (labolene) followed by ul- .... increases the ionic mobilities and hence the conductivity ... A PEC cell of configuration, CdSe/1 M polysulphide/.

  12. Yellow sweet potato flour: use in sweet bread processing to increase β-carotene content and improve quality.

    Science.gov (United States)

    Nogueira, Amanda C; Sehn, Georgia A R; Rebellato, Ana Paula; Coutinho, Janclei P; Godoy, Helena T; Chang, Yoon K; Steel, Caroline J; Clerici, Maria Teresa P S

    2018-01-01

    Yellow sweet potato is mostly produced by small farmers, and may be a source of energy and carotenoids in the human diet, but it is a highly perishable crop. To increase its industrial application, yellow sweet potato flour has been produced for use in bakery products. This study aimed to evaluate the technological quality and the carotenoids content in sweet breads produced with the replacement of wheat flour by 0, 3, 6, and 9% yellow sweet potato flour. Breads were characterized by technological parameters and β-carotene levels during nine days of storage. Tukey's test (p<0.05) was used for comparison between means. The increase in yellow sweet potato flour concentrations in bread led to a decrease of specific volume and firmness, and an increase in water activity, moisture, orange coloring, and carotenoids. During storage, the most significant changes were observed after the fifth day, with a decrease in intensity of the orange color. The β-carotene content was 0.1656 to 0.4715 µg/g in breads with yellow sweet potato flour. This work showed a novel use of yellow sweet potato in breads, which brings benefits to consumers' health and for the agricultural business.

  13. Facile synthesis of CsPbBr3/PbSe composite clusters.

    Science.gov (United States)

    Nguyen, Thang Phan; Ozturk, Abdullah; Park, Jongee; Sohn, Woonbae; Lee, Tae Hyung; Jang, Ho Won; Kim, Soo Young

    2018-01-01

    In this work, CsPbBr 3 and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr 3 quantum dots modified the electronic structure of CsPbBr 3 , increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr 3 perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr 3 quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr 3 /PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr 3 /PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr 3 reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr 3 quantum dots.

  14. Increasing the protein content of meals and its effect on daily energy intake.

    Science.gov (United States)

    Blatt, Alexandria D; Roe, Liane S; Rolls, Barbara J

    2011-02-01

    High-protein preloads have been shown to enhance satiety, but little is known about the satiating effects of protein in more typical situations when meals are consumed ad libitum. To investigate the effects of protein in amounts commonly consumed over a day, a crossover study was conducted in 2008. In this experiment, 18 normal-weight women consumed ad libitum lunch and dinner entrées 1 day a week that were covertly varied in protein content (10%, 15%, 20%, 25%, or 30% energy). Entrées were manipulated by substituting animal protein for starchy ingredients and were matched for energy density, fat content, palatability, and appearance. Unmanipulated breakfasts and evening snacks were consumed ad libitum. Participants rated their hunger and fullness before and after meals as well as the taste and appearance of entrées. Data were analyzed using a mixed linear model. Results showed that mean 24-hour protein intake increased significantly across conditions, from 44±2 g/day in the 10% protein condition to 82±6 g/day in the 30% condition. Daily energy intake did not differ significantly across the 10% to 30% protein conditions (means 1,870±93, 1,887±93, 1,848±111, 1,876±100, and 1,807±98 kcal in the 10%, 15%, 20%, 25%, and 30% energy groups, respectively). There were no significant differences in hunger and fullness ratings across conditions or in taste and appearance ratings of the manipulated entrées. This study showed that varying the protein content of several entrées consumed ad libitum did not differentially influence daily energy intake or affect ratings of satiety. Copyright © 2011 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

  15. Effect of increasing helium content and disk dwarfs evolution on the chemical enrichment of the galaxy

    Energy Technology Data Exchange (ETDEWEB)

    Caimmi, R [Padua Univ. (Italy). Ist. di Astronomia

    1979-07-01

    The author deals with two main effects: First the empirical metal abundance distribution in Main Sequence disk dwarfs of the solar neighbourhood, and second, the theoretical possibility of (i) an increased helium content as the Galaxy evolves, and (ii) the presence of evolutionary effects in disk dwarfs (i.e., the age of some or all stars considered up to the subgiant phase is not necessarily longer than the age of the galactic disk). Account is taken of a linear increase of helium content with metal content, and some constraints are imposed relative to initial, solar and present-day observed values of Y and Z, and to observed relative helium to heavy element enrichment, ..delta..Y/..delta..Z. In this way, little influence is found on the empirical metal abundance distribution in the range 0<=..delta..Y/..delta..Z<=3, while larger values of ..delta..Y/..delta..Zwould lead to a more significant influence. 'Evolved' and 'unevolved' theoretical metal abundance distributions are derived by accounting for a two-phase model of chemical evolution of galaxies and for a linear mass dependence of star lifetimes in the spectral range G2V-G8V and are compared with the empirical distribution. All are in satisfactory agreement due to systematic shift data by different observations; several values of collapse time Tsub(c) and age of the Galaxy T are also considered. Finally, models of chemical evolution invoking homogeneous collapse without infall and inhomogeneous collapse with infall, are briefly discussed relative to the empirical metal abundance distribution in Main Sequence disk dwarfs of the solar neighbourhood.

  16. Measurement of 76Se and 78Se (γ, n) cross sections

    International Nuclear Information System (INIS)

    Kitatani, Fumito; Harada, Hideo; Goko, Shinji; Utsunomiya, Hiroaki; Akimune, Hidetoshi; Toyokawa, Hiroyuki; Yamada, Kawakatsu

    2011-01-01

    The (γ, n) cross sections of Se isotopes ( 76 Se, 78 Se) were measured to supply fundamental data for estimating the inverse reaction cross section, i.e., the 79 Se(n, γ) 80 Se cross section. The enriched samples and a reference 197 Au sample were irradiated with laser-Compton scattering (LCS) γ-rays. The excitation function of each (γ, n) cross section was determined for the energy range from each near neutron separation energy to the threshold energy of (γ, 2n) reaction. The energy point corresponding to each cross section was deduced using the accurately determined energy distribution of LCS γ-rays. Systematic (γ, n) cross sections for Se isotopes including 80 Se were compared with those calculated by using a statistical model calculation code TALYS. (author)

  17. Iron clustering in GaSe epilayers grown on GaAs(111)B

    International Nuclear Information System (INIS)

    Moraes, A R de; Mosca, D H; Mattoso, N; Guimaraes, J L; Klein, J J; Schreiner, W H; Souza, P E N de; Oliveira, A J A de; Vasconcellos, M A Z de; Demaille, D; Eddrief, M; Etgens, V H

    2006-01-01

    In this paper we report on the structural, morphological and magnetic properties of semiconducting GaSe epilayers, grown by molecular beam epitaxy, doped to different iron contents (ranging from 1 to 22 at.% Fe). Our results indicate that iron forms metallic Fe nanoparticles with diameters ranging from 1 to 20 nm embedded in the crystalline GaSe matrix. The Fe incorporation proceeds by segregation and agglomeration and induces a progressive disruption of the lamellar GaSe epilayers. The magnetization as a function of the temperature for zero-field cooling with the magnetic field parallel to the surface of the sample provides evidence of superparamagnetic behaviour of the nanoparticles. Cathodoluminescence experiments performed at room temperature reveal semiconducting behaviour even for samples with Fe concentrations as high as 20 at.%

  18. AC conductivity and dielectric properties of amorphous GexSb40-xSe60 thin films

    International Nuclear Information System (INIS)

    Atyia, H.E.; Farid, A.M.; Hegab, N.A.

    2008-01-01

    Measurements of AC conductivity and dielectric properties have been made for chalcogenide film samples of Ge x Sb 40-x Se 60 (with x=0, 10 and 20 at%) at different temperatures (303-393 K) and various frequencies (10 2 -10 5 Hz). It was found that the AC conductivity obeys the law σ(ω, T)=Aω s . The exponent s 1 and dielectric loss ε 2 were found to decrease with frequency and increase with temperature. The maximum barrier height W M was calculated from dielectric measurements according to the Guintini equation. It was found that the obtained value of W m agrees with that proposed by the theory of hopping of charge carriers over potential barrier as suggested by Elliott in case of chalcogenide glasses. The density of localized states N(E F ) has also been calculated for the studied compositions. The effect of decreasing the Sb content at the expense of the Ge content was investigated for the obtained results of the studied parameters

  19. Structural analysis of quaternary Se{sub 85−x}Sb{sub 10}In{sub 5}Ag{sub x} bulk glassy alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Rita, E-mail: reetasharma2012@gmail.com; Sharma, Shaveta; Kumar, Praveen; Chander, Ravi; Thangaraj, R.; Mian, M. [Semiconductors Laboratory, Department of Physics, GND University, Amritsar (India)

    2015-08-28

    The physical properties of chalcogenide semiconductor have attracted much attention recently due to their applications in optical recording media and inorganic resist due to photo induced structural transformations observed in these materials. The bulk samples of Se{sub 85-x}Sb{sub 10}In{sub 5}Ag{sub x} system are prepared by melt-quenching technique. X-ray diffraction technique and RAMAN spectroscopy have been used to study the role of Ag additive on the amorphous/crystalline nature and molecular structure of Se{sub 85}Sb{sub 10}In{sub 5} glassy alloys. The phases Sb{sub 2}Se{sub 3}, In-Sb and In{sub 2}Se{sub 3} has been observed by X-ray diffraction. The formation of AgInSe{sub 2} phase along with the enhancement in intensity has been observed with the Ag addition.Three bands observed by raman spectroscopy for Se85Sb10In5 are at 70 cm-1, 212cm-1 and 252cm-1. The formation of small bands up to wavenumber 188cm{sup -1} and shifting in second band along with the increase in intensity up to sample x=5 has been observed with the Ag addition. The enhancement in intensity in third band with Ag content has been observed.

  20. A novel wheat variety with elevated content of amylose increases resistant starch formation and may beneficially influence glycaemia in healthy subjects

    Directory of Open Access Journals (Sweden)

    Elin Östman

    2011-08-01

    Full Text Available Previous studies indicate that elevated amylose content in products from rice, corn, and barley induce lower postprandial glycaemic responses and higher levels of resistant starch (RS. Consumption of slowly digestible carbohydrates and RS has been associated with health benefits such as decreased risk of diabetes and cardiovascular disease.To evaluate the postprandial glucose and insulin responses in vivo to bread products based on a novel wheat genotype with elevated amylose content (38%.Bread was baked from a unique wheat genotype with elevated amylose content, using baking conditions known to promote amylose retrogradation. Included test products were bread based on whole grain wheat with elevated amylose content (EAW, EAW with added lactic acid (EAW-la, and ordinary whole grain wheat bread (WGW. All test breads were baked at pumpernickel conditions (20 hours, 120°C. A conventionally baked white wheat bread (REF was used as reference. Resistant starch (RS content was measured in vitro and postprandial glucose and insulin responses were tested in 14 healthy subjects.The results showed a significantly higher RS content (on total starch basis in breads based on EAW than in WGW (p<0.001. Lactic acid further increased RS (p<0.001 compared with both WGW and EAW. Breads baked with EAW induced lower postprandial glucose response than REF during the first 120 min (p<0.05, but there were no significant differences in insulin responses. Increased RS content per test portion was correlated to a reduced glycaemic index (GI (r= − 0.571, p<0.001.This study indicates that wheat with elevated amylose content may be preferable to other wheat genotypes considering RS formation. Further research is needed to test the hypothesis that bread with elevated amylose content can improve postprandial glycaemic response.

  1. Accumulation of weak optical signals and spectral memory in InSe single crystals

    International Nuclear Information System (INIS)

    Abdinov, A.Shj.; Babaeva, R.F.

    1995-01-01

    Dysprosium alloying effect on the electron and physico-chemical properties of InSe monocrystals is studied. Accumulation of low light signals and spectral or color memory is shown to be observed under certain conditions (temperature, content of admitted impurity, wave length and light intensity)

  2. Elucidating the Impact of Chalcogen Content on the Photovoltaic Properties of Oxychalcogenide Perovkskites: NaMO3-x Qx (M=Nb, Ta; Q=S, Se, Te).

    Science.gov (United States)

    Park, Heesoo; Alharbi, Fahhad H; Sanvito, Stefano; Tabet, Nouar; El-Mellouhi, Fedwa

    2018-03-19

    In the quest for nontoxic and stable perovskites for solar cells, we have conducted a systematic study of the effect of chalcogen content in oxychalcogenide perovskite by using DFT and quasi-particle perturbation theory. We explored the changes in the electronic structure due to the substitution of O atoms in NaNbO 3 and NaTaO 3 perovskite structures with various chalcogens (S, Se, Te) at different concentrations. Interestingly, the introduction of the chalcogen atoms resulted in a drastic reduction in the electronic band gap, which made some of the compounds fall within the visible range of the solar spectrum. In addition, our analysis of the electronic structure shows that the optical transition becomes direct as a result of the strong hybridization between the orbitals of the transition metal and those of the chalcogen ion, in contrast to the indirect band feature of NaNbO 3 and NaTaO 3 . We identified candidates with a high theoretical solar conversion efficiency that approached the Shockley-Queisser limit, which makes them suitable for thin-film solar cell applications. The present work serves as a guideline for experimental efforts by identifying the chalcogen content that should be targeted during the synthetic route of thermodynamically stable and strongly photoactive absorbers for oxychalcogenide perovskites in thin-film solar cells. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. NOViSE: a virtual natural orifice transluminal endoscopic surgery simulator.

    Science.gov (United States)

    Korzeniowski, Przemyslaw; Barrow, Alastair; Sodergren, Mikael H; Hald, Niels; Bello, Fernando

    2016-12-01

    Natural orifice transluminal endoscopic surgery (NOTES) is a novel technique in minimally invasive surgery whereby a flexible endoscope is inserted via a natural orifice to gain access to the abdominal cavity, leaving no external scars. This innovative use of flexible endoscopy creates many new challenges and is associated with a steep learning curve for clinicians. We developed NOViSE-the first force-feedback-enabled virtual reality simulator for NOTES training supporting a flexible endoscope. The haptic device is custom-built, and the behaviour of the virtual flexible endoscope is based on an established theoretical framework-the Cosserat theory of elastic rods. We present the application of NOViSE to the simulation of a hybrid trans-gastric cholecystectomy procedure. Preliminary results of face, content and construct validation have previously shown that NOViSE delivers the required level of realism for training of endoscopic manipulation skills specific to NOTES. VR simulation of NOTES procedures can contribute to surgical training and improve the educational experience without putting patients at risk, raising ethical issues or requiring expensive animal or cadaver facilities. In the context of an experimental technique, NOViSE could potentially facilitate NOTES development and contribute to its wider use by keeping practitioners up to date with this novel surgical technique. NOViSE is a first prototype, and the initial results indicate that it provides promising foundations for further development.

  4. Effect of the chemical composition of Cu–In–Ga–Se layers on the photoconductivity and conversion efficiency of CdS/CIGSe solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Novikov, G. F., E-mail: ngf@icp.ac.ru [Russian Academy of Sciences, Institute of Problems of Chemical Physics (Russian Federation); Tsai, Wei-Tao [Chang Gung University, Department of Electronic Engineering (China); Bocharov, K. V.; Rabenok, E. V. [Russian Academy of Sciences, Institute of Problems of Chemical Physics (Russian Federation); Jeng, Ming-Jer; Chang, Liann-Be [Chang Gung University, Department of Electronic Engineering (China); Feng, Wu-Shiung [Russian Academy of Sciences, Institute of Problems of Chemical Physics (Russian Federation); Ao, Jian-Ping; Sun, Yun [Nankai University, Institute of Photoelectronic Thin Film Device and Technology (China)

    2016-10-15

    The effect of the [Ga]/[In+Ga] ratio of gallium and indium on the microwave photoconductivity of Cu–In–Ga–Se (CIGSe) films and on the efficiency of solar cells fabricated in accordance with the same technology is investigated. According to the observations of a field-emission scanning electron microscopy (FESEM), the grain size decreases with increasing Ga content. With increasing gallium content in the samples, the photogenerated-electron lifetime and the activation energy of the microwave photoconductivity also decrease. The changes in the activation energy of the through conduction in darkness are less than 20%. Analysis of the obtained data shows that the known effect of the gallium gradient on the efficiency should be associated with modification of the internal structure of grains instead of with their boundaries.

  5. Relationships among oil content, protein content and seed size in soybeans

    Directory of Open Access Journals (Sweden)

    Mario Marega Filho

    2001-03-01

    Full Text Available During 1995/96 and 1996/97, experiments were carried out at Londrina State University, aiming at quantifying the oil and protein contents in two groups of soybean genotypes; estimating the phenotypic, genotypic and environmental correlations existent among oil, protein content and seed size, and identifying genotypes for direct human consumption with high protein content. The evaluated characters were Weight of a Hundred Seeds (WHS, expressed in grams/100 seeds, Oil Content (OC and Protein Content (PC, expressed in %. In the experiment carried out in the field, OC ranged from 12 to 20.37 % and PC from 35.66 to 41.75% while in the experiment carried out in the greenhouse OC ranged from 12.26 to 21.79 % and PC from 32.95 to 41.56 % . The correlations between oil and protein were negative and significant. The relationship among WHS with OC and PC was low and higly affected by the time effect. Due to their high protein content and stability to oil and protein contents, there were distinction among the treatments carried out in the field (GA23 and GA20, and those carried out in the greenhouse (PI408251, Waseda, B6F4 (L-3 less, PI423909 and Tambagura.Durante 1995/96 e 1996/97, foram conduzidos experimentos na Universidade Estadual de Londrina, visando: quantificar os teores de óleo e proteína em dois grupos de genótipos de soja tipo alimento; estimar as correlações fenotípicas e genotípicas existentes entre os teores de óleo, proteína e tamanho das sementes; e, identificar genótipos para consumo humano de forma direta, com elevado teor de proteína. Foram avaliados os caracteres Peso de Cem Sementes (PCS, expresso em gramas / 100 sementes, Teor de Óleo (TO, e Teor de Proteína (TP, expressos em %. Na população conduzida a campo, a característica TO variou de 12 a 20,4 %, e TP de 35,7 a 41,8 %. A população conduzida em casa de vegetação apresentou uma variação de 12,3 a 21,8 % para TO, e de 33 a 41,6 % para TP. As correla

  6. Structural and optical properties of Sb65Se35-xGex thin films

    Science.gov (United States)

    Saleh, S. A.; Al-Hajry, A.; Ali, H. M.

    2011-07-01

    Sb65Se35-xGex (x=0-20 at.%) thin films, prepared by the electron beam evaporation technique on ultrasonically cleaned glass substrates at 300 K, were investigated. The amorphous structure of the thin films was confirmed by x-ray diffraction analysis. The structure was deduced from the Raman spectra measured for all germanium contents in the Sb-Se-Ge matrix. The absorption coefficient (α) of the films was determined by optical transmission measurements. The compositional dependence of the optical band gap is discussed in light of topological and chemical ordered network models.

  7. Phase conversion from hexagonal CuS(y)Se(1-y) to cubic Cu(2-x)S(y)Se(1-y): composition variation, morphology evolution, optical tuning, and solar cell applications.

    Science.gov (United States)

    Xu, Jun; Yang, Xia; Yang, Qingdan; Zhang, Wenjun; Lee, Chun-Sing

    2014-09-24

    In this work, we report a simple and low-temperature approach for the controllable synthesis of ternary Cu-S-Se alloys featuring tunable crystal structures, compositions, morphologies, and optical properties. Hexagonal CuS(y)Se(1-y) nanoplates and face centered cubic (fcc) Cu(2-x)S(y)Se(1-y) single-crystal-like stacked nanoplate assemblies are synthesized, and their phase conversion mechanism is well investigated. It is found that both copper content and chalcogen composition (S/Se atomic ratio) of the Cu-S-Se alloys are tunable during the phase conversion process. Formation of the unique single-crystal-like stacked nanoplate assemblies is resulted from oriented stacking coupled with the Ostwald ripening effect. Remarkably, optical tuning for continuous red shifts of both the band-gap absorption and the near-infrared localized surface plasmon resonance are achieved. Furthermore, the novel Cu-S-Se alloys are utilized for the first time as highly efficient counter electrodes (CEs) in quantum dot sensitized solar cells (QDSSCs), showing outstanding electrocatalytic activity for polysulfide electrolyte regeneration and yielding a 135% enhancement in power conversion efficiency (PCE) as compared to the noble metal Pt counter electrode.

  8. Polybutylcyanoacrylate nanoparticles for the delivery of [75Se]norcholestenol

    International Nuclear Information System (INIS)

    Kreuter, J.; Wilson, C.G.

    1983-01-01

    Polybutylcyanoacrylate nanoparticles have been used for the intravenous and intramuscular administration of a steroidal material ([ 75 Se]norcholestenol) to the rabbit. Whole body profiles of 75 Se, obtained using a gamma camera over a period of 30 days, show that the [ 75 Se]norcholestenol is retained for a longer period of time with the nanoparticle system than for the control system where the drug was dissolved in a micellar system. In vitro dialysis experiments indicate that the thermodynamic activity of the drug can be increased by its incorporation within nanoparticles. This increased activity may affect the distribution of the drug into body tissues. (Auth.)

  9. Effects of increasing number of rings on the ion sensing ability of CdSe quantum dots: a theoretical study

    Science.gov (United States)

    Malik, Pragati; Kakkar, Rita

    2018-04-01

    A computational study on the structural and electronic properties of a special class of artificial atoms, known as quantum dots, has been carried out. These are semiconductors with unique optical and electronic properties and have been widely used in various applications, such as bio-sensing, bio-imaging, and so on. We have considered quantum dots belonging to II-VI types of semiconductors, due to their wide band gap, possession of large exciton binding energies and unique optical and electronic properties. We have studied their applications as chemical ion sensors by beginning with the study of the ion sensing ability of (CdSe) n ( n = 3, 6, 9 which are in the size range of 0.24, 0.49, 0.74 nm, respectively) quantum dots for cations of the zinc triad, namely Zn2+, Cd2+, Hg2+, and various anions of biological and environmental importance, and studied the effect of increasing number of rings on their ion sensing ability. The various structural, electronic, and optical properties, their interaction energies, and charge transfer on interaction with metal ions and anions have been calculated and reported. Our studies indicate that the CdSe quantum dots can be employed as sensors for both divalent cations and anions, but they can sense cations better than anions.

  10. Alternate-Day High-Fat Diet Induces an Increase in Mitochondrial Enzyme Activities and Protein Content in Rat Skeletal Muscle.

    Science.gov (United States)

    Li, Xi; Higashida, Kazuhiko; Kawamura, Takuji; Higuchi, Mitsuru

    2016-04-06

    Long-term high-fat diet increases muscle mitochondrial enzyme activity and endurance performance. However, excessive calorie intake causes intra-abdominal fat accumulation and metabolic syndrome. The purpose of this study was to investigate the effect of an alternating day high-fat diet on muscle mitochondrial enzyme activities, protein content, and intra-abdominal fat mass in rats. Male Wistar rats were given a standard chow diet (CON), high-fat diet (HFD), or alternate-day high-fat diet (ALT) for 4 weeks. Rats in the ALT group were fed a high-fat diet and standard chow every other day for 4 weeks. After the dietary intervention, mitochondrial enzyme activities and protein content in skeletal muscle were measured. Although body weight did not differ among groups, the epididymal fat mass in the HFD group was higher than those of the CON and ALT groups. Citrate synthase and beta-hydroxyacyl CoA dehydrogenase activities in the plantaris muscle of rats in HFD and ALT were significantly higher than that in CON rats, whereas there was no difference between HFD and ALT groups. No significant difference was observed in muscle glycogen concentration or glucose transporter-4 protein content among the three groups. These results suggest that an alternate-day high-fat diet induces increases in mitochondrial enzyme activities and protein content in rat skeletal muscle without intra-abdominal fat accumulation.

  11. Expression and crystallization of SeDsbA, SeDsbL and SeSrgA from Salmonella enterica serovar Typhimurium

    International Nuclear Information System (INIS)

    Jarrott, R.; Shouldice, S. R.; Gunčar, G.; Totsika, M.; Schembri, M. A.; Heras, B.

    2010-01-01

    The cloning, purification, crystallization and preliminary crystallographic studies of three DsbA-like proteins present in S. enterica serovar Typhimurium, SeDsbA, SeDsbL and SeSrgA, are reported. Pathogens require protein-folding enzymes to produce functional virulence determinants. These foldases include the Dsb family of proteins, which catalyze oxidative folding in bacteria. Bacterial disulfide catalytic processes have been well characterized in Escherichia coli K-12 and these mechanisms have been extrapolated to other organisms. However, recent research indicates that the K-12 complement of Dsb proteins is not common to all bacteria. Importantly, many pathogenic bacteria have an extended arsenal of Dsb catalysts that is linked to their virulence. To help to elucidate the process of oxidative folding in pathogens containing a wide repertoire of Dsb proteins, Salmonella enterica serovar Typhimurium has been focused on. This Gram-negative bacterium contains three DsbA proteins: SeDsbA, SeDsbL and SeSrgA. Here, the expression, purification, crystallization and preliminary diffraction analysis of these three proteins are reported. SeDsbA, SeDsbL and SeSrgA crystals diffracted to resolution limits of 1.55, 1.57 and 2.6 Å and belonged to space groups P2 1 , P2 1 2 1 2 and C2, respectively

  12. Consumption of selenium-enriched broccoli increases cytokine production in human peripheral blood mononuclear cells stimulated ex vivo, a preliminary human intervention study.

    Science.gov (United States)

    Bentley-Hewitt, Kerry L; Chen, Ronan K-Y; Lill, Ross E; Hedderley, Duncan I; Herath, Thanuja D; Matich, Adam J; McKenzie, Marian J

    2014-12-01

    Selenium (Se) is a micronutrient essential for human health, including immune function. Previous research indicates that Se supplementation may cause a shift from T helper (Th)1- to Th2-type immune responses. We aim to test the potential health promoting effects of Se-enriched broccoli. In a human trial, 18 participants consumed control broccoli daily for 3 days. After a 3-day wash-out period, the participants were provided with Se-enriched broccoli containing 200 μg of Se per serving for 3 days. Plasma and peripheral blood mononuclear cell (PBMC) samples were collected at the start and end of each broccoli feeding period for analysis of total Se and measurement of cytokine production from PBMC stimulated with antigens ex vivo. Plasma Se content remained consistent throughout the control broccoli feeding period and the baseline of the Se-enriched broccoli period (1.22 μmol/L) and then significantly increased following 3 days of Se-enriched broccoli feeding. Interleukin (IL-2, IL-4, IL-5, IL-13, and IL-22) production from PBMC significantly increased after 3 days of Se-enriched broccoli feeding compared with baseline. This study indicates that consumption of Se-enriched broccoli may increase immune responses toward a range of immune challenges. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. A new strategy for umbilical cord blood collection developed at the first Colombian public cord blood bank increases total nucleated cell content.

    Science.gov (United States)

    Vanegas, Diana; Triviño, Lady; Galindo, Cristian; Franco, Leidy; Salguero, Gustavo; Camacho, Bernardo; Perdomo-Arciniegas, Ana-María

    2017-09-01

    The total nucleated cell dosage of umbilical cord blood (UCB) is an important factor in determining successful allogeneic hematopoietic stem cell transplantation after a minimum human leukocyte antigen donor-recipient match. The northern South American population is in need of a new-generation cord blood bank that cryopreserves only units with high total nucleated cell content, thereby increasing the likelihood of use. Colombia set up a public cord blood bank in 2014; and, as a result of its research for improving high total nucleated cell content, a new strategy for UCB collection was developed. Data from 2933 collected and 759 cryopreserved cord blood units between 2014 and 2015 were analyzed. The correlation of donor and collection variables with cellularity was evaluated. Moreover, blood volume, cell content, CD34+ count, clonogenic capacity, and microbial contamination were assessed comparing the new method, which combines in utero and ex utero techniques, with the conventional strategies. Multivariate analysis confirmed a correlation between neonatal birth weight and cell content. The new collection method increased total nucleated cell content in approximately 26% and did not alter pre-cryopreservation and post-thaw cell recovery, viability, or clonogenic ability. Furthermore, it showed a remarkably low microbial contamination rate (1.2%). The strategy for UCB collection developed at the first Colombian public cord blood bank increases total nucleated cell content and does not affect unit quality. The existence of this bank is a remarkable breakthrough for Latin-American patients in need of this kind of transplantation. © 2017 The Authors Transfusion published by Wiley Periodicals, Inc. on behalf of AABB.

  14. Consideration of factors affecting strip effluent pH and sodium content

    Energy Technology Data Exchange (ETDEWEB)

    Peters, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-29

    A number of factors were investigated to determine possible reasons for why the Strip Effluent (SE) can sometimes have higher than expected pH values and/or sodium content, both of which have prescribed limits. All of the factors likely have some impact on the pH values and Na content.

  15. How Correlated is the FeSe /SrTiO3 System?

    Science.gov (United States)

    Mandal, Subhasish; Zhang, Peng; Ismail-Beigi, Sohrab; Haule, K.

    2017-08-01

    Recent observation of ˜10 times higher critical temperature in a FeSe monolayer compared with its bulk phase has drawn a great deal of attention because the electronic structure in the monolayer phase appears to be different than bulk FeSe. Using a combination of density functional theory and dynamical mean field theory, we find electronic correlations have important effects on the predicted atomic-scale geometry and the electronic structure of the monolayer FeSe on SrTiO3 . The electronic correlations are dominantly controlled by the Se-Fe-Se angle either in the bulk phase or the monolayer phase. But the angle sensitivity increases and the orbital differentiation decreases in the monolayer phase compared to the bulk phase. The correlations are more dependent on Hund's J than Hubbard U . The observed orbital selective incoherence to coherence crossover with temperature confirms the Hund's metallic nature of the monolayer FeSe. We also find electron doping by oxygen vacancies in SrTiO3 increases the correlation strength, especially in the dx y orbital by reducing the Se-Fe-Se angle.

  16. Impact of sulfur content on structural and optical properties of Ge20Se80-xSx chalcogenide glasses thin films

    Science.gov (United States)

    Dongol, M.; Elhady, A. F.; Ebied, M. S.; Abuelwafa, A. A.

    2018-04-01

    Chalcogenide system Ge20Se80-xSx (x = 0, 15 and 30%) thin films were prepared by thermal evaporation technique. The amorphous state of the samples was confirmed according to XRD. The structural changes occurring upon replacement Se by S was investigated using Raman spectroscopy. The optical properties of the as-deposited Ge20Se80-xSx thin films have been studied by analysis the transmittance T(λ) measured at room temperature in the wavelength range 200-2500 nm using Swanepoel's method. Urbach energy (Ee) and optical band gap (Eg) were strongly affected by sulfur concentration in the sample. The refractive index evaluated through envelope method was extrapolated by Cauchy dispersion relationship over the whole spectral range. Moreover, the dispersion of refractive index was analyzed in terms of the single-oscillator Wemple-Di Domenico model. The third-order nonlinear susceptibility (χ(3)) and nonlinear refractive index (n2) were calculated and discussed for different Ge20Se80-xSx (x = 0, 15 and 30%).

  17. Liver iron content determined by MRI. Spin-echo vs. gradient-echo

    Energy Technology Data Exchange (ETDEWEB)

    Juchems, M.S.; Wunderlich, A.P. [Universitaetskliniken Ulm (Germany). Klinik fuer Diagnostische und Interventionelle Radiologie; Cario, H. [Universitaetskliniken Ulm (Germany). Klinik fuer Kinder- und Jugendmedizin; Schmid, M. [Stadtspital Triemli, Zuerich (Switzerland). Medizinische Onkologie und Haematologie

    2012-05-15

    Purpose: Liver iron content (LIC) measurement plays a central role in the management of patients with transfusional iron overload. Calculating the LIC with data obtained from standardized MRI sequences represents an attractive alternative diagnostic possibility. The purpose of this study was to compare the LIC measurement obtained with gradient-echo (GRE) sequences to the mean liver proton transverse relaxation (R2) acquired with SE sequences. Materials and Methods: 68 patients with iron overload (median age: 24, range: 3 - 88) underwent 1.5 T MRI for liver iron content measurement. All patients received spin-echo (SE) and gradient-echo (GRE) sequences. Results: The two MRI methods revealed different liver iron content results although a significant correlation was found (r = 0.85, p < 0.001). Values evaluated using GRE sequences (median: 260 {mu}mol/g dry weight [d.w.], range: 6 - 732) were generally higher than those obtained by SE examinations (median: 161 {mu}mol /g d.w., range: 5 - 830). Conclusion: In conclusion, our study revealed different results for both MRI measurements, which could lead to different decisions concerning the management of chelation therapy in individual patients. (orig.)

  18. Understanding the paradox of selenium contamination in mercury mining areas: high soil content and low accumulation in rice.

    Science.gov (United States)

    Zhang, Hua; Feng, Xinbin; Jiang, Chengxin; Li, Qiuhua; Liu, Yi; Gu, Chunhao; Shang, Lihai; Li, Ping; Lin, Yan; Larssen, Thorjørn

    2014-05-01

    Rice is an important source of Se for billions of people throughout the world. The Wanshan area can be categorized as a seleniferous region due to its high soil Se content, but the Se content in the rice in Wanshan is much lower than that from typical seleniferous regions with an equivalent soil Se level. To investigate why the Se bioaccumulation in Wanshan is low, we measured the soil Se speciation using a sequential partial dissolution technique. The results demonstrated that the bioavailable species only accounted for a small proportion of the total Se in the soils from Wanshan, a much lower quantity than that found in the seleniferous regions. The potential mechanisms may be associated with the existence of Hg contamination, which is likely related to the formation of an inert Hg-Se insoluble precipitate in soils in Wanshan. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Yellow sweet potato flour: use in sweet bread processing to increase β-carotene content and improve quality

    Directory of Open Access Journals (Sweden)

    AMANDA C. NOGUEIRA

    2018-02-01

    Full Text Available ABSTRACT Yellow sweet potato is mostly produced by small farmers, and may be a source of energy and carotenoids in the human diet, but it is a highly perishable crop. To increase its industrial application, yellow sweet potato flour has been produced for use in bakery products. This study aimed to evaluate the technological quality and the carotenoids content in sweet breads produced with the replacement of wheat flour by 0, 3, 6, and 9% yellow sweet potato flour. Breads were characterized by technological parameters and β-carotene levels during nine days of storage. Tukey’s test (p<0.05 was used for comparison between means. The increase in yellow sweet potato flour concentrations in bread led to a decrease of specific volume and firmness, and an increase in water activity, moisture, orange coloring, and carotenoids. During storage, the most significant changes were observed after the fifth day, with a decrease in intensity of the orange color. The β-carotene content was 0.1656 to 0.4715 µg/g in breads with yellow sweet potato flour. This work showed a novel use of yellow sweet potato in breads, which brings benefits to consumers’ health and for the agricultural business.

  20. Sodium content and sodium efflux of mononuclear leucocytes from young subjects at increased risk of developing essential hypertension

    DEFF Research Database (Denmark)

    Pedersen, K E; Nielsen, J R; Klitgaard, N A

    1990-01-01

    Mononuclear leucocytes were used as a cellular model for the in vitro measurements of volume, sodium and potassium content, sodium efflux rate constants and absolute sodium efflux in order to assess any cellular changes in young men at increased risk of developing essential hypertension...

  1. Controllable size reduction of CdSe nanowires through the intermediate formation of Se-coated CdSe nanowires using acid and thermal treatment

    Energy Technology Data Exchange (ETDEWEB)

    Lam, N S [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Wong, K W [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Li, Q [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Zheng, Z [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Lau, W M [Surface Science Western, University of Western Ontario, London, ON, N6A 5B7 (Canada)

    2007-10-17

    Thinning of CdSe nanowires (NWs) with controllable size was achieved by a simple acid treatment and subsequent annealing on thick CdSe NWs synthesized from vapour phase growth. During acid treatment, not only the undesired impurities such as native oxides of Cd and Se could be etched, but surface reactions of CdSe NWs were also observed, resulting in the formation of a layer of elemental Se around a thinner CdSe core. As a result, a heterostructure of Se - CdSe nanostructure formed after acid treatment of CdSe NWs. Upon thermal annealing, the Se shell was effectively removed and thinned stoichiometric single-crystalline CdSe NWs could be obtained. It was observed that NWs could be thinned by up to {approx}60% in diameter by acid treatment and subsequent Se thermal desorption. The degree of thinning was controllable by adjusting the duration of acid treatment. The success of the thinning of CdSe NWs by simple acid treatment and the annealing process reported here opens a new processing route for obtaining stoichiometric CdSe NWs with controllable size reduction and improved aspect ratio. This can undoubtedly broadly improve the range of applications of 1D CdSe nanostructures and allow more exploration of their uni-directional properties. A correction was made to the last paragraph of section 3 on 18 September 2007. The corrected electronic version is identical to the print version.

  2. Controllable size reduction of CdSe nanowires through the intermediate formation of Se-coated CdSe nanowires using acid and thermal treatment

    International Nuclear Information System (INIS)

    Lam, N S; Wong, K W; Li, Q; Zheng, Z; Lau, W M

    2007-01-01

    Thinning of CdSe nanowires (NWs) with controllable size was achieved by a simple acid treatment and subsequent annealing on thick CdSe NWs synthesized from vapour phase growth. During acid treatment, not only the undesired impurities such as native oxides of Cd and Se could be etched, but surface reactions of CdSe NWs were also observed, resulting in the formation of a layer of elemental Se around a thinner CdSe core. As a result, a heterostructure of Se - CdSe nanostructure formed after acid treatment of CdSe NWs. Upon thermal annealing, the Se shell was effectively removed and thinned stoichiometric single-crystalline CdSe NWs could be obtained. It was observed that NWs could be thinned by up to ∼60% in diameter by acid treatment and subsequent Se thermal desorption. The degree of thinning was controllable by adjusting the duration of acid treatment. The success of the thinning of CdSe NWs by simple acid treatment and the annealing process reported here opens a new processing route for obtaining stoichiometric CdSe NWs with controllable size reduction and improved aspect ratio. This can undoubtedly broadly improve the range of applications of 1D CdSe nanostructures and allow more exploration of their uni-directional properties. A correction was made to the last paragraph of section 3 on 18 September 2007. The corrected electronic version is identical to the print version

  3. Benefits of oxygen in CuInSe{sub 2} and CuGaSe{sub 2} containing Se-rich grain boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Chunbao, E-mail: chunbaofeng@126.com [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China); Luo, Min; Li, Bolin; Li, Dengfeng [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China); Nie, Jinlan [Department of Applied Physics, University of Electronic Science and Technology of China, Chengdu, 610054 (China); Dong, Huining [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China)

    2014-05-01

    Using density functional theory calculation, we show that oxygen (O) exhibits an interesting effect in CuInSe{sub 2} and CuGaSe{sub 2}. The Se atoms with dangling bonds in a Se-rich Σ3 (114) grain boundary (GB) create deep gap states due to strong interaction between Se atoms. However, when such a Se atom is substituted by an O atom, the deep gap states can be shifted into valence band, making the site no longer a harmful non-radiative recombination center. We find that O atoms prefer energetically to substitute these Se atoms and induce significant lattice relaxation due to their smaller atomic size and stronger electronegativity, which effectively reduces the anion–anion interaction. Consequently, the deep gap states are shifted to lower energy regions close or even below the top of the valence band.

  4. Lower-energy neutron sources for increasing the sensitivity of nuclear gages for measuring the water content of bulk materials

    International Nuclear Information System (INIS)

    Bailey, S.M.

    1977-01-01

    The sensitivity of a gage using a nuclear source for measuring the water content of bulk materials, such as plastic concrete, is increased by use of a lithium or fluorine neutron nuclear source. 3 figures

  5. Ultrasound-assisted extraction technique for establishing selenium contents in breast cancer biopsies by Zeeman-electrothermal atomic absorption spectrometry using multi-injection

    International Nuclear Information System (INIS)

    Lavilla, I.; Mosquera, A.; Millos, J.; Cameselle, J.; Bendicho, C.

    2006-01-01

    A solid-liquid extraction method is developed to establish the contents of selenium in breast cancer biopsies. The method is based on the ultrasound-assisted extraction of selenium from pretreated biopsies prior to Se determination by atomic absorption spectrometry with longitudinal-Zeeman background correction. Fifty-one breast biopsies were collected from the Cies Hospital (Vigo, Spain), 32 of which correspond to tumor tissue and 19 to normal tissue (parenchyma). Difficulties arising from the samples analyzed, i.e. small samples mass (50-100 mg), extremely low Se contents and sample texture modification including tissue hardening due to formaldehyde preservation are addressed and overcome. High intensity sonication using a probe together with addition of hydrogen peroxide succeeded in completely extracting Se from biopsies. The multiple injection technique was useful to tackle the low Se contents present in some biopsies. The detection limit was 25 ng g -1 of Se and the precision, expressed as relative standard deviation, was less than 10%. Se contents ranged from 0.08 to 0.4 μg g -1 for parenchyma samples and from 0.09 to 0.8 μg g -1 for tumor samples. In general, Se levels in tumor biopsies were higher as compared with the adjacent normal tissue in 19 patients by a factor of up to 6. Analytical data confirmed Se accumulation in the breast tumors

  6. Supplementing female rats with DHA-lysophosphatidylcholine increases docosahexaenoic acid and acetylcholine contents in the brain and improves the memory and learning capabilities of the pups.

    Directory of Open Access Journals (Sweden)

    Rojas, I.

    2010-03-01

    Full Text Available Docosahexaenoic acid (DHA is supplied to the foetus and newborn through the mother from their own reserves and their diet. No consensus about the best form to supplement DHA has been established. We propose that DHAcontaining lysophosphatidylcholine (DHA-LPC, obtained from DHA-rich eggs may be a suitable form of DHA and choline (the precursor of acetylcholine supplementation. We evaluated the effectiveness of DHA-LPC to increase DHA and acetylcholine concentration in the brain of pups born from female rats supplemented with DHA-LPC before and during pregnancy. We also evaluated the effect of DHA supplementation on learning and memory capabilities of pups through the Skinner test for operant conditioning. Female Wistar rats received 40-day supplementation of DHA-LPC (8 mg DHA/kg b.w/daily., before and during pregnancy. After delivery, plasma, erythrocyte, liver, and adipose tissue DHA and plasma choline were analyzed. Brains from 60 day-old pups separated into frontal cortex, cerebellum, striatum, hippocampus, and occipital cortex, were assessed for DHA, acetylcholine, and acetylcholine transferase (CAT activity. Pups were subjected to the Skinner box test. DHA-LPC supplementation produces higher choline and liver DHA contents in the mother’s plasma and increases the pups’ DHA and acetylcholine in the cerebellum and hippocampus. CAT was not modified by supplementation. The Skinner test shows that pups born from DHA-LPC supplemented mothers exhibit better scores of learning and memory than the controls. Conclusion: DHA-LPC may be an adequate form for DHA supplementation during the perinatal period.El ácido docosahexaenoico (DHA que requiere el feto y el recién nacido lo aporta la madre desde sus reservas y la dieta, por lo cual se sugiere suplementar a la madre con DHA. No hay consenso sobre la mejor forma de suplementación. Proponemos que un lisofosfolípido que contiene DHA y colina (DHA-LPC obtenido de huevos con alto contenido de DHA es

  7. Local Content

    CSIR Research Space (South Africa)

    Gibberd, Jeremy

    2016-10-01

    Full Text Available Local content refers to materials and products made in a country as opposed those that are imported. There is an increasing interest in the concept of local content as a means of supporting local economies and providing jobs (Belderbos & Sleuwaegen...

  8. Thermal analysis of chalcogenide glasses of the system (As/sub/2Se/sub/3)/sub/(1-x):(Tl/sub/2Se)/sub/x

    International Nuclear Information System (INIS)

    Majid, C.A.

    1987-01-01

    In this paper differential thermal analysis (DTA) measurements of chalcogenide glasses of the system (As/sub/2Se/sub/3)/sub/(1-x): (Tl/sub/2Se)/sub/x, with x=0, 0.125, 0.25 and 0.50 are reported. The glass-forming tendencies of these materials have been calculated. The glass-forming tendency of As/sub/2Se/sub/3 has been found to be the highest among the member glasses of this family of chalcogenides. It was found that the glass-forming tendency of As/sub/2Se/sub/3 decreasing gradually at the Tl/sub/2/Se concentration increases. Tl/sub/2Se additions lower the glass transition temperature T/sub/q and the area under the endothermic peak for glass transition temperature, suggesting a tendency for relatively weaker bonding and hence less stability of Tl-rich glass compositions. These studies show that Tl/sub/2Se concentrations result in glasses with progressively higher crystallization tendencies. (author)

  9. Alternative syntheses of [73,75Se]selenoethers exemplified for homocysteine[73,75Se]selenolactone

    International Nuclear Information System (INIS)

    Ermert, J.; Blum, T.; Hamacher, K.; Coenen, H.H.

    2001-01-01

    The present work describes two radiosynthetic pathways to prepare homocysteine[ 75 Se]selenolactone 1 starting from n.c.a. [ 75 Se]selenite 2. It was achieved either by alkylation reaction of n.c.a. methyl[ 75 Se]selenide 4 or by hydrolysis of alkylated 1,3-dicyclohexyl[ 75 Se]selenourea 11. N.c.a. methyl[ 75 Se]selenide 4 is available using sulfur as non-isotopic carrier. However, the radiochemical yield of the substitution of 2-tert.-butoxycarbonylamino-4-bromobutyric acid ethylester 5 with n.c.a. methyl-[ 75 Se]selenide is only in the range of 15%-20%. Birch reduction of protected n.c.a. [ 75 Se]selenomethionine 6 formed leads to a RCY of 5%-10% homocysteine[ 75 Se]selenolactone 1. Alternatively, the synthesis of homocysteine[ 75 Se]selenolactone 1 is possible by hydrolysis of the corresponding [ 75 Se]selenouronium salt 11 available by addition of 2-tert.-butoxycarbonylamino-4-bromobutyric acid ethylester 5 to 1,3-dicyclohexyl[ 75 Se]selenourea 10. A method was developed for the synthesis of 1,3-dicyclohexyl[ 75 Se]selenourea 10 by addition of c.a. [ 75 Se]SeH 2 to 1,3-dicyclohexylcarbodiimide, which leads to 20%-30% RCY of c.a. homocysteine[ 75 Se]selenolactone 1. (orig.)

  10. Structural and optical properties of Ni doped ZnSe nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, Kanta; Dwivedi, Y.; Jaggi, Neena, E-mail: neena_jaggi@rediffmail.com

    2015-02-15

    In the present work synthesis of ZnSe:Ni nanoparticles using a simple solvothermal method has been discussed. The structural characterizations of as synthesized materials were done by powder X-ray diffraction (XRD), Transmission electron microscope (TEM) and High resolution transmission microscope (HRTEM) imaging techniques, which revealed formation of core–shell nanoparticles with crystallite size 2–4 nm. The structural parameters such as lattice constants, internal strain, dislocation density etc. of ZnSe and Ni doped ZnSe nanocrystals were estimated. Nickel doping in ZnSe host is verified by the Raman spectroscopy. Optical properties were diagnosed by UV–vis absorption and photoluminescence (PL) techniques. The observed blue-shift in UV–vis absorption edge of the prepared sample of ZnSe as compared to its value for the bulk counterpart indicates formation of nanosized particles. PL spectra of Ni{sup 2+} doped samples indicate red-shift and improved emission intensity. - Highlights: • Synthesis of core shell structures of the ZnSe by simple approach. • Enhancement of the photoluminescence emission with the increase in the concentration of Ni a transition metal into the host material. • Increase in the dislocation density and strain with decrease in grain size.

  11. Luminescence spectra of CdSe/ZnSe double layers of quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Reznitsky, Alexander; Permogorov, Sergei; Korenev, Vladimir V.; Sedova, Irina; Sorokin, Sergey; Sitnikova, Alla; Ivanov, Sergei [A.F. Ioffe Physico-Technical Institute, Polytekhnicheskaya 26, 194021 St. Petersburg (Russian Federation); Klochikhin, Albert [B.P. Konstantinov Nuclear Physics Institute, St. Petersburg (Russian Federation)

    2009-12-15

    We have studied the emission spectra and structural properties of double CdSe/ZnSe quantum dot (QD) sheet structures grown by molecular beam epitaxy in order to elucidate the mechanisms of the electronic and strain field interaction between the QD planes. The thickness of the ZnSe barrier separating the CdSe sheets was in the range of 10-60 monolayers (ML) in the set of samples studied. We have found that coupling between dots in adjacent layers becomes relatively strong in CdSe/ZnSe double layers structures with 25-27 ML barrier, while it is rather weak when the barrier thickness exceeds 30 ML. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  12. Polybutylcyanoacrylate nanoparticles for the delivery of (/sup 75/Se)norcholesterol

    Energy Technology Data Exchange (ETDEWEB)

    Kreuter, J. (Eidgenoessiches Technische Hochschule, Zurich (Switzerland). Inst. fuer Pharmacie); Mills, S.N.; Davis, S.S. (Nottingham Univ. (UK)); Wilson, C.G. (Nottingham Univ. (UK). Medical School)

    1983-08-01

    Polybutylcyanoacrylate nanoparticles have been used for the intravenous and intramuscular administration of a steroidal material ((/sup 75/Se)norcholesterol) to the rabbit. Whole body profiles of /sup 75/Se, obtained using a gamma camera over a period of 30 days, show that the (/sup 75/Se)norcholesterol is retained for a longer period of time with the nanoparticle system than for the control system where the drug was dissolved in a micellar system. In vitro dialysis experiments indicate that the thermodynamic activity of the drug can be increased by its incorporation within nanoparticles. This increased activity may affect the distribution of the drug into body tissues.

  13. Large particles increase viscosity and yield stress of pig cecal contents without changing basic viscoelastic properties.

    Science.gov (United States)

    Takahashi, Toru; Sakata, Takashi

    2002-05-01

    The viscosity of gut contents should influence digestion and absorption. Earlier investigators measured the viscosity of intestinal contents after the removal of solid particles. However, we previously found that removal of solid particles from pig cecal contents dramatically lowered the viscosity of the contents. Accordingly, we examined the contribution of large solid particles to viscoelastic parameters of gut contents in the present study. We removed large particles from pig cecal contents by filtration through surgical gauze. Then, we reconstructed the cecal contents by returning all, one half or none of the original amount of the large particles to the filtrate. We measured the viscosity, shear stress and shear rate of these reconstructed cecal contents using a tube-flow viscometer. The coefficient of viscosity was larger when the large-particle content was higher (P Bingham plastic nature irrespective of large-particle content. We calculated the yield stress of these fluids assuming that the fluids behave as Bingham plastic. The yield stress of the cecal contents was greater (P Bingham plastic characteristics to pig cecal contents.

  14. Use of Microthemes to Increase Writing Content for Introductory Science Laboratory

    Directory of Open Access Journals (Sweden)

    Michelle L. Lewis

    2012-02-01

    Full Text Available Writing is a learning activity, as well as a communication skill. Many instructors recognize the value of writing as a learning tool but struggle to develop effective writing assignments. Instructors are generally pressed for time during lecture due to the necessity to deliver content and, therefore, cannot dedicate time necessary to teach science writing skills effectively. Traditional term papers assigned to a class with varying writing skills may not accomplish the desired goal of teaching both technical writing skills and critical thinking skills. Students that are already struggling with content may be at a disadvantage in terms of conveying complex ideas. An answer to this problem is the microtheme paper which we employ in an Introductory Botany laboratory setting.

  15. Laser-induced fluorescence of se, as, and sb in an electrothermal atomizer.

    Science.gov (United States)

    Swart, D J; Ezer, M; Pacquette, H L; Simeonsson, J B

    1998-04-01

    Trace detection of Se, As, and Sb atoms has been performed by electrothermal atomization laser-induced fluorescence (ETA-LIF) approaches. Production of far-UV radiation necessary for excitation of As atoms at 193.696 nm and Se atoms at 196.026 nm was accomplished by stimulated Raman shifting (SRS) of the output of a frequency-doubled dye laser operating near 230 nm. Both wavelengths were obtained as second-order anti-Stokes shifts of the dye laser radiation and provided up to 10 μJ/pulse, which was shown through power dependence studies to be sufficient for saturation in the ETA. An excited-state direct line fluorescence approach using excitation at 206.279 nm was also investigated for the LIF detection of Se. High-sensitivity LIF of Sb atoms was accomplished using 206.833-nm excitation and detection at 259.805 nm. The accuracy of the ETA-LIF approaches was demonstrated by determining the As and Se content of aqueous reference samples. The limits of detection (absolute mass) were 200 fg by ground-state LIF and 150 fg by excited-state direct line fluorescence for Se, 200 fg for As, and 10 fg for Sb; these LODs compare favorably with results reported previously in the literature for ETA-LIF, GFAAS, and ICP-MS methods.

  16. From field to health: a simple way to increase the nutraceutical content of grape as shown by NO-dependent vascular relaxation.

    Science.gov (United States)

    Fumagalli, Francesca; Rossoni, Mara; Iriti, Marcello; di Gennaro, Antonio; Faoro, Franco; Borroni, Emanuele; Borgo, Michele; Scienza, Attilio; Sala, Angelo; Folco, Giancarlo

    2006-07-26

    Polyphenolic grapevine components involved in plant resistance against pathogens possess various pharmacological properties that include nitric oxide (NO)-dependent vasodilation and anti-inflammatory and free radical scavenging activities, which may explain the protective effect of moderate red wine consumption against cardiovascular disease. The aim of this work was (a) to verify the possibility that preharvest treatments of grapevine with a plant activator, benzo-(1,2,3)-thiadiazole-7-carbothioic acid S-methyl ester (BTH), could lead to an enriched nutraceutical potential of wine and (b) to characterize the profile of metabolites responsible for pharmacological activity. Plant spraying at the end of veraison, with a water suspension of BTH (0.3 mM), led to increased whole anthocyanin content as confirmed by HPLC comparative analysis. Extracts from berry skins of BTH-treated grapevines caused NO-dependent vasorelaxation, with a concentration-response curve that was significantly shifted to the left of the control non-BTH-treated curve. Moreover, 1:1000 dilutions of berry extracts from BTH-treated plants significantly increased basal production of guanosine 3',5'-cyclic monophosphate (cGMP) in human vascular endothelial cells when compared to the corresponding extracts of untreated plants. These results show that BTH treatment increases anthocyanin content of grape extracts, as well as their ability to induce NO-mediated vasoprotection. No increase of anthocyanin content was observed in the wine extracts from BTH-treated vines. It is concluded that BTH treatment could be exploited to increase the nutraceutical potential of grapes.

  17. l-cysteine desulfhydrase-related H2 S production is involved in OsSE5-promoted ammonium tolerance in roots of Oryza sativa.

    Science.gov (United States)

    Guo, Hongming; Zhou, Heng; Zhang, Jing; Guan, Wenxue; Xu, Sheng; Shen, Wenbiao; Xu, Guohua; Xie, Yanjie; Foyer, Christine Helen

    2017-09-01

    Previous studies revealed that rice heme oxygenase PHOTOPERIOD SENSITIVITY 5 (OsSE5) is involved in the regulation of tolerance to excess ammonium by enhancing antioxidant defence. In this study, the relationship between OsSE5 and hydrogen sulfide (H 2 S), a well-known signalling molecule, was investigated. Results showed that NH 4 Cl triggered the induction of l-cysteine desulfhydrase (l-DES)-related H 2 S production in rice seedling roots. A H 2 S donor not only alleviated the excess ammonium-triggered inhibition of root growth but also reduced endogenous ammonium, both of which were aggravated by hypotaurine (HT, a H 2 S scavenger) or dl-propargylglycine (PAG, a l-DES inhibitor). Nitrogen metabolism-related enzymes were activated by H 2 S, thus resulting in the induction of amino acid synthesis and total nitrogen content. Interestingly, the activity of l-DES, as well as the enzymes involved in nitrogen metabolism, was significantly increased in the OsSE5-overexpression line (35S:OsSE5), whereas it impaired in the OsSE5-knockdown mutant (OsSE5-RNAi). The application of the HT/PAG or H 2 S donor could differentially block or rescue NH 4 Cl-hyposensitivity or hypersensitivity phenotypes in 35S:OsSE5-1 or OsSE5-RNAi-1 plants, with a concomitant modulation of nitrogen assimilation. Taken together, these results illustrated that H 2 S function as an indispensable positive regulator participated in OsSE5-promoted ammonium tolerance, in which nitrogen metabolism was facilitated. © 2017 John Wiley & Sons Ltd.

  18. Scintigraphic evaluation of enterogastric reflux using 75Se-HCAT: Methodology and first clinical observations

    International Nuclear Information System (INIS)

    Furno, A.; Sciarretta, G.; Malaguti, P.; Fagioli, G.; Pozzato, R.

    1987-01-01

    The aim of this study was to assess the possibility of detecting enterogastric reflux (EGR) by 75 Se-HCAT cholescintigraphy. The lowest detectable activity in the gastric area at different concentrations of the radiotracer in the gallbladder was preliminary measured both in a plastic phantom and in an in vivo model. Ten patients were studied after a single oral administration of 1480 KBq 75 Se-HCAT. Gamma camera imaging was carried out for five consecutive days during both fasting and after meal ingestion. In our in vivo model an EGR corresponding to 1% of gallbladder content on day one and 8% on day five was detected. In three out of five patients in whom bile was present in the stomach at endoscopy, 75 Se-HCAT cholescintigraphy demonstrated an EGR, while in three out of five patients in whom endoscopy was negative, 75 Se-HCAT cholescintigrahy detected EGR either during fasting or after meal ingestion. As EGR is not constant, Se-HCAT may be a useful tracer of bile to detect EGR over a prolonged period of time and in different physiological conditions. (orig.)

  19. Structure of Se-rich As-Se glasses by high-resolution x-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Golovchak, R.; Kovalskiy, A.; Miller, A. C.; Jain, H.; Shpotyuk, O.

    2007-01-01

    To establish the validity of various proposed structural models, we have investigated the structure of the binary As x Se 100-x chalcogenide glass family (x≤40) by high-resolution x-ray photoelectron spectroscopy. From the composition dependence of the valence band, the contributions to the density of states from the 4p lone pair electrons of Se and the 4p bonding states and 4s electrons of Se and As are identified in the top part of the band. The analysis of Se 3d and As 3d core-level spectra supports the so-called chain crossing model for the atomic structure of Se-rich As x Se 100-x bulk glasses. The results also indicate small deviations (∼3-8%) from this model, especially for glass compositions with short Se chains (25 40 Se 60 and of Se-Se-Se fragments in a glass with composition x=30 is established

  20. Phase diagram of SnTe-CdSe cross-section of SnTe+CdSe reversible SnSe+CdTe ternary reciprocal system

    International Nuclear Information System (INIS)

    Dubrovin, I.V.; Budennaya, L.D.; Mizetskaya, I.B.; Sharkina, Eh.V.

    1986-01-01

    Phase equilibrium diagram of SnTe-CdSe cross-section of Sn, Cd long Te, Se ternary reciprocal system is investigated using the methods of differential thermal, X-ray phase, and microstructural analyses. Maximum length of solid solutions on the base of SnTe corresponds to approximately 14 mol.% at 1050 K and approximately 3 mol.% of CdSe at 670 K. Region of solid solutions on the base of CdSe corresponds to less than 1 mol.% of SnTe at room temperature. SnTe-CdSe cross-section is not a quasibinar one. Equilibrium is shifted to the left in the SnTe+CdSe reversible SnSe+CdTe reciprocal system

  1. The relationship of element contents in erythrocyte with thyroid function

    International Nuclear Information System (INIS)

    Zhu Li; Zhao Zhiying; Wang Zhenghua; Li Yanfen; Liu Nianqing; Liu Pingsheng; Xu qing; Liu Peng; Qian Qingfang

    1998-01-01

    The serum thyroid hormones (T 3 , T 4 , TSH, FT 3 and FT 4 ) level and the elements K, Ca, Fe, Cu, Zn, Se and Rb in the erythrocyte in 76 cases is measured by radiometric assay in vitro (RIA and IRMA) and nuclear analytical technique (PIXE and INNA). According to thyroid hormones level, the cases are divided into four groups with hyperthyroid, normal, subhyperthyroid and hypothyroid. The difference and correlation of various parameters in four groups are compared by Oneway-ANOVA and Partial Correlation using SPSS/PC statistical package respectively. The results show that the content of Zn for hypothyroid group is significantly higher than hyperthyroid (P = 0.007) and sub-hyperthyroid (P = 0.046) groups, and the content of Zn for normal is lower than hypothyroid group but not significant difference (P = 0.083), the other elements contents are no significant difference among four groups. The highly significant linear correlation between the contents of K, Zn and Cu in the erythrocyte and T 3 , T 4 level ratio and TSH level is observed in hypothyroid and normal groups, the close correlation between the content of Se and serum T 4 and TSH level is also observed in hyperthyroid and sub-hyperthyroid groups. These suggest that trace elements may be important for the synthesis, metabolism and biological function of thyroid hormones

  2. Shell Thickness Dependence of Interparticle Energy Transfer in Core-Shell ZnSe/ZnSe Quantum Dots Doping with Europium

    Science.gov (United States)

    Liu, Ni; Li, Shuxin; Wang, Caifeng; Li, Jie

    2018-04-01

    Low-toxic core-shell ZnSe:Eu/ZnS quantum dots (QDs) were prepared through two steps in water solution: nucleation doping and epitaxial shell grown. The structural and morphological characteristics of ZnSe/ZnS:Eu QDs with different shell thickness were explored by transmission electron microscopy (TEM) and X-ray diffraction (XRD) results. The characteristic photoluminescence (PL) intensity of Eu ions was enhanced whereas that of band-edge luminescence and defect-related luminescence of ZnSe QDs was decreased with increasing shell thickness. The transformation of PL intensity revealed an efficient energy transfer process between ZnSe and Eu. The PL intensity ratio of Eu ions ( I 613) to ZnSe QDs ( I B ) under different shell thickness was systemically analyzed by PL spectra and time-resolved PL spectra. The obtained results were in agreement with the theory analysis results by the kinetic theory of energy transfer, revealing that energy was transmitted in the form of dipole-electric dipole interaction. This particular method of adjusting luminous via changing the shell thickness can provide valuable insights towards the fundamental understanding and application of QDs in the field of optoelectronics.

  3. Far-Infrared Absorption of PbSe Nanorods

    KAUST Repository

    Hyun, Byung-Ryool

    2011-07-13

    Measurements of the far-infrared absorption spectra of PbSe nanocrystals and nanorods are presented. As the aspect ratio of the nanorods increases, the Fröhlich sphere resonance splits into two peaks. We analyze this splitting with a classical electrostatic model, which is based on the dielectric function of bulk PbSe but without any free-carrier contribution. Good agreement between the measured and calculated spectra indicates that resonances in the local field factors underlie the measured spectra. © 2011 American Chemical Society.

  4. Comparing the influence of selenite (Se4+) and selenate (Se6+) on the inhibition of the mercury (Hg) phytotoxicity to pak choi.

    Science.gov (United States)

    Tran, Thi Anh Thu; Dinh, Quang Toan; Cui, Zeiwei; Huang, Jie; Wang, Dan; Wei, Tianjiao; Liang, Dongli; Sun, Xin; Ning, Ping

    2018-01-01

    Selenite (Se (IV)) and selenate (Se (IV)) have recently been demonstrated to be equally effective in inhibiting mercury (Hg) phytotoxicity to plants. This assertion is still unclear. In this study, we aimed to explore the potential effects of Se species (Se 4+ and Se 6+ ) on the inhibition of the mercury (Hg) bioavailability to pak choi in dry land. Pot experiments with exposure to different dosages of mercuric chloride (HgCl 2 ) and selenite (Na 2 SeO 3 ) or selenate (Na 2 SeO 4 ) were treated. To compare the influence of Se (IV) and Se (VI) on the bioaccumulation and bioavailability of Hg, the levels of total Hg in different pak choi (Brassica chinensis L.) tissues (roots and shoots) and the distribution changes of Hg fractions in soil before planting and after harvest were determined as well as the Hg I R values in soils (relative binding intensity) were analyzed. Results showed that application Se (IV) reduced the concentrations of Hg in pak choi roots more than Se (VI). Hg concentrations were also decreased in pak choi shoots in Se (IV) treatments, while which notably increased in Se (VI) treatments. Thus, Se (IV) plays a more important role than Se (VI) in limiting the absorption and bioaccumulation of Hg in pak choi. Moreover, this inhibition may only significantly occur when Se (IV) is at an appropriate level (2.5mg/kg). In addition, the good correlations between the proportions of mobile Hg fractions (soluble and exchangeable fractions), I R values with the Hg concentrations in plants were observed. This affirmed the importance of the Hg fractions transformation and the I R indicator of Hg in the assessment of their bioavailability. Our findings regarding the importance of Se (IV) influence in reducing Hg bioaccumulation not only provided the correct appraisal about the effect of Se species on the inhibition of the Hg phytotoxicity to pak choi in dry land, but also be a good reference for selecting Se fertilizer forms (Se 4+ or Se 6+ ). Copyright © 2017

  5. [Sodium and potassium content of various Chilean foods].

    Science.gov (United States)

    Alvarez de Araya, C; Farah, M; Zuccarelli, M T; Masson, L

    1981-03-01

    Sodium and potassium contents of 40 high-protein dietary products were determined in order to complete the Table de Composición Química se Alimentos Chilenos (Chemical Composition Table of Chilean Foods). These cations' level must be strictly controlled in diets of many renal and heart patients. In Chile, Nutritionists who are in charge of preparing these diets, do not have a national composition table related to the sodium and potassium content for most of the food products. Samples of fluid cow's milk, dried milk with different fat contents, some cheeses, hen eggs, bovine entrails, some meat derivates and several meat cuts, including bovine, pork, lamb and chicken were studied.

  6. Is there a feeding strategy to increase milk casein content?

    Directory of Open Access Journals (Sweden)

    A. Formigoni

    2010-04-01

    Full Text Available Because more than 60% of milk produced in Italy is transformed into cheese, milk economical value strongly depends on cheese yield. Among the factors that influence cheese yield, milk casein and fat content plays a major role: when milk is converted into Grana Padano and Parmigiano reggiano, three grams of seasoned cheese are produced from one gram of milk casein.....

  7. Musts with Increased Lignan Content Through Addition of Lignan Extracts

    Czech Academy of Sciences Publication Activity Database

    Balík, J.; Híc, P.; Kulichová, J.; Novotná, P.; Tříska, Jan; Vrchotová, Naděžda; Strohalm, J.; Lefnerová, D.; Houška, M.

    2017-01-01

    Roč. 10, č. 7 (2017), s. 1367-1373 ISSN 1935-5130 R&D Projects: GA MŠk(CZ) LO1415; GA MZe QJ1210258 Institutional support: RVO:67179843 Keywords : Enrichment of must * Lignans (HMR, CONI) * Antioxidant activity * Total polyphenol content Subject RIV: GM - Food Processing OBOR OECD: Environmental sciences (social aspects to be 5.7) Impact factor: 2.576, year: 2016

  8. Hydrostatic-pressure studies of confined transitions in cubic Zn1-xCdxSe/ZnSe strained-layer quantum wells

    International Nuclear Information System (INIS)

    Thomas, R.J.; Chandrasekhar, H.R.; Chandrasekhar, M.; Samarth, N.; Luo, H.; Furdyna, J.

    1992-01-01

    Photoluminescence spectra of cubic Zn 0.82 Cd 0.18 Se quantum wells of widths 30, 60, and 200 A are studied as a function of hydrostatic pressure (0--60 kbar) at 80 K. The pressure coefficients of heavy-hole excitons are found to decrease with increasing well width. The photoluminescence energies of the ZnSe barrier and cap layers are also observed to shift as a function of hydrostatic pressure, providing a measure of the pressure coefficient of the direct gap in this material

  9. La lectura en el aula. Qué se hace, qué se debe hacer y qué se puede hacer

    OpenAIRE

    Pablo Lorente Muñoz

    2011-01-01

    Emilio Sánchez Miguel (Coord.). La lectura en el aula. Qué se hace, qué se debe hacer y qué se puede hacer. Graó, col. Crítica y Fundamentos, 27. Barcelona, 2010. 382 págs. ISBN: 978-84-7827-892-3

  10. SE-VYZ

    International Nuclear Information System (INIS)

    Anon

    2004-01-01

    On this CD compact disc 6 video-films (A-1 NPP; Bituminization; Cementation; Pressing; The Interim spent fuel storage facility; Transport into the National radioactive waste repository Mochovce; Ignition; and Vitrification). In these films process of radioactive waste treatment in the Bohunice Radioactive Waste Processing Center (SE-VYZ) is presented. 2 presentations about radioactive wastes treatment in the SE-VYZ are included

  11. Fabrication of fluorescence-based biosensors from functionalized CdSe and CdTe quantum dots for pesticide detection

    International Nuclear Information System (INIS)

    Chi Tran, Thi Kim; Vu, Duc Chinh; Thuy Ung, Thi Dieu; Nguyen, Hai Yen; Nguyen, Ngoc Hai; Dao, Tran Cao; Pham, Thu Nga; Nguyen, Quang Liem

    2012-01-01

    This paper presents the results on the fabrication of highly sensitive fluorescence biosensors for pesticide detection. The biosensors are actually constructed from the complex of quantum dots (QDs), acetylcholinesterase (AChE) and acetylthiocholine (ATCh). The biosensor activity is based on the change of luminescence from CdSe and CdTe QDs with pH, while the pH is changed with the hydrolysis rate of ATCh catalyzed by the enzyme AChE, whose activity is specifically inhibited by pesticides. Two kinds of QDs were used to fabricate our biosensors: (i) CdSe QDs synthesized in high-boiling non-polar organic solvent and then functionalized by shelling with two monolayers (2-ML) of ZnSe and eight monolayers (8-ML) of ZnS and finally capped with 3-mercaptopropionic acid (MPA) to become water soluble; and (ii) CdTe QDs synthesized in aqueous phase then shelled with CdS. For normal checks the fabricated biosensors could detect parathion methyl (PM) pesticide at very low contents of ppm with the threshold as low as 0.05 ppm. The dynamic range from 0.05 ppm to 1 ppm for the pesticide detection could be expandable by increasing the AChE amount in the biosensor. (paper)

  12. Arrays of ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2} nanocables with tunable shell composition for efficient photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Akram, Muhammad Aftab; Javed, Sofia [Center of Super-Diamond and Advanced Films (COSDAF), Department of Physics and Materials Science, City University of Hong Kong, Hong Kong (Hong Kong); City University of Hong Kong, Shenzhen Research Institute, Shenzhen 518057 (Hong Kong); School of Chemical and Materials Engineering, National University of Sciences and Technology, Sector H-12, Islamabad 44000 (Pakistan); Xu, Jun, E-mail: apjunxu@hfut.edu.cn [School of Electronic Science and Applied Physics, Hefei University of Technology, Hefei 230009 (China); Mujahid, Mohammad, E-mail: principal@scme.nust.edu.pk [School of Chemical and Materials Engineering, National University of Sciences and Technology, Sector H-12, Islamabad 44000 (Pakistan); Lee, Chun-Sing, E-mail: c.s.lee@cityu.edu.hk [Center of Super-Diamond and Advanced Films (COSDAF), Department of Physics and Materials Science, City University of Hong Kong, Hong Kong (Hong Kong); City University of Hong Kong Shenzhen Research Institute, Shenzhen 518057 (Hong Kong)

    2015-05-28

    Arrays of one-dimensional (1D) nanostructure are receiving much attention for their optoelectronic and photovoltaic applications due to their advantages in light absorption, charge separation, and transportation. In this work, arrays of ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2} core/shell nanocables with tunable shell compositions over the full range of 0 ≤ x ≤ 1 have been controllably synthesized. Chemical conversions of ZnO nanorods to a series of ZnO-based nanocables, including ZnO/ZnSe, ZnO/CuSe, ZnO/CuSe/In{sub x}Ga{sub 1−x}, ZnO/CuSe/(In{sub x}Ga{sub 1−x}){sub 2}Se{sub 3}, and ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2}, are well designed and successfully achieved. Composition-dependent influences of the CuIn{sub x}Ga{sub 1−x}Se{sub 2} shells on photovoltaic performance are investigated. It is found that the increase in indium content (x) leads to an increase in short-circuit current density (J{sub SC}) but a decrease in open-circuit voltage (V{sub OC}) for the ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2} nanocable solar cells. An array of ZnO/CuIn{sub 0.67}Ga{sub 0.33}Se{sub 2} nanocables with a length of ∼1 μm and a shell thickness of ∼10 nm exhibits a bandgap of 1.20 eV, and yields a maximum power conversion efficiency of 1.74% under AM 1.5 G illumination at an intensity of 100 mW/cm{sup 2}. It dramatically surpasses that (0.22%) of the ZnO/CuIn{sub 0.67}Ga{sub 0.33}Se{sub 2} planar thin-film device. Our work reveals that 1D nanoarray allows efficient photovoltaics without using toxic CdS buffer layer.

  13. One-pot synthesis of hollow NiSe-CoSe nanoparticles with improved performance for hybrid supercapacitors

    Science.gov (United States)

    Chen, Haichao; Fan, Meiqiang; Li, Chao; Tian, Guanglei; Lv, Chunju; Chen, Da; Shu, Kangying; Jiang, Jianjun

    2016-10-01

    Hollow NiSe-CoSe samples have been synthesized for the first time via a one-pot solvothermal approach. The strategy is robust enough to synthesize NiSe-CoSe nanoparticles with different NiSe to CoSe ratios but with a similar hollow structure. Co ions in the NiSe-CoSe nanoparticles play decisive role for formation of the hollow structure; otherwise, the nanoparticles become solid for the NiSe sample. When used as the positive electroactive materials for energy storage, the NiSe-CoSe samples show excellent electrochemical activity in alkaline electrolyte. Using the synergistic effect between NiSe and CoSe, the electrochemical performance of NiSe-CoSe can be tuned by varying the NiSe to CoSe ratios. The NiSe-CoSe sample with a NiSe to CoSe ratio of 4:2 shows the best electrochemical performance in terms of superior specific capacity, improved rate capability and excellent cycling stability. In addition, the electrochemical performance of NiSe-CoSe sample with a NiSe to CoSe ratio of 4:2 is also evaluated via assembling hybrid supercapacitors with RGO, and the hybrid supercapacitor delivers both high power and energy densities (41.8 Wh kg-1 at 750 W kg-1 and 20.3 Wh kg-1 at 30 kW kg-1).

  14. Mechanisms for altered carnitine content in hypertrophied rat hearts

    International Nuclear Information System (INIS)

    Reibel, D.K.; O'Rourke, B.; Foster, K.A.

    1987-01-01

    Carnitine levels are reduced in hypertrophied hearts of rats subjected to aortic constriction (banding) and evaluated in hypertrophied hearts of spontaneously hypertensive rats (SHR). In an attempt to determine the mechanisms for these alterations, L-[ 14 C]carnitine transport was examined in isolated perfused hearts. Total carnitine uptake was significantly reduced by ∼20% in hypertrophied hearts of banded rats at all perfusate carnitine concentrations employed. The reduction in total uptake was due to a 40% reduction in carrier-mediated carnitine uptake with no difference in uptake by diffusion. In contrast, carnitine uptake was not altered in isolated hypertrophied hearts of SHR. However, serum carnitine levels were elevated in SHR, which could result in increased myocardial carnitine uptake in vivo. The data suggest that altered carnitine content in hypertrophied hearts of aortic-banded rats is due to an alteration in the carrier-mediated carnitine transport system in the myocardium. However, altered carnitine content in hypertrophied hearts of SHR is not due to a change in the carnitine transport system per se but may rather be due to a change in serum carnitine levels

  15. Application of Bokashi Botom Ash for Increasing Upland Rice Yield and Decreasing Grain Pb Content in Vitric Hapludans

    Directory of Open Access Journals (Sweden)

    Nunung Sondari

    2012-05-01

    Full Text Available Greenhouse experiment was conducted at Agricultural Faculty of Winaya Mukti University Tanjungsari SumedangRegency, from May to October 2009. The objective of this experiment was to study the effect of bokashi bottom ashon the growth, yield, and Pb content of upland rice. The experiment used a Randomized completely Block Design(RBD which consisted of five treatments and five replications. The treatments were level of bokashi bottom ash i.e.0, 5, 10, 15, and 20 Mg ha-1. The results showed that the application of bokashi bottom ash increased the growth andyield of upland rice of Situbagendit variety except plant height at age of 21 days after seedling (DAS. Application15 Mg ha -1 of bokashi bottom ash gave the best effect to the plant height, number of leaves, number of tillers andshoot/root ratio, while applications of 10, 15 and 20 Mg ha -1 increased number of productive tillers, amount of filledgrains, and weight of grains. Bokashi bottom ash did not affect the heavy metal content of upland rice grain ofSitubagendit variety.

  16. Increased bioactive lipids content in human subcutaneous and epicardial fat tissue correlates with insulin resistance.

    Science.gov (United States)

    Błachnio-Zabielska, Agnieszka U; Baranowski, Marcin; Hirnle, Tomasz; Zabielski, Piotr; Lewczuk, Anna; Dmitruk, Iwona; Górski, Jan

    2012-12-01

    Obesity is a risk factor for metabolic diseases. Intramuscular lipid accumulation of ceramides, diacylglycerols, and long chain acyl-CoA is responsible for the induction of insulin resistance. These lipids are probably implicated in obesity-associated insulin resistance not only in skeletal muscle but also in fat tissue. Only few data are available about ceramide content in human subcutaneous adipose tissue. However, there are no data on DAG and LCACoA content in adipose tissue. The aim of our study was to measure the lipids content in human SAT and epicardial adipose tissue we sought to determine the bioactive lipids content by LC/MS/MS in fat tissue from lean non-diabetic, obese non-diabetic, and obese diabetic subjects and test whether the lipids correlate with HOMA-IR. We found, that total content of measured lipids was markedly higher in OND and OD subjects in both types of fat tissue (for all p lipids content is greater in subcutaneous and epicardial fat tissue and the particular lipids content positively correlates with HOMA-IR.

  17. Urinary excretion of water-soluble vitamins increases in streptozotocin-induced diabetic rats without decreases in liver or blood vitamin content.

    Science.gov (United States)

    Imai, Eri; Sano, Mitsue; Fukuwatari, Tsutomu; Shibata, Katsumi

    2012-01-01

    It is thought that the contents of water-soluble vitamins in the body are generally low in diabetic patients because large amounts of vitamins are excreted into urine. However, this hypothesis has not been confirmed. To investigate this hypothesis, diabetes was induced in male Wistar rats (6 wk old) by streptozotocin treatment, and they were then given diets containing low, medium or sufficient vitamins for 70 d. The contents of 6 kinds of B-group vitamins, namely vitamin B₁, vitamin B₂, vitamin B₆, vitamin B₁₂, folate and biotin, were determined in the urine, blood and liver. No basic differences among the dietary vitamin contents were observed. The urinary excretion of vitamins was higher in diabetic rats than in control rats. The blood concentrations of vitamin B₁₂ and folate were lowered by diabetes, while, those of vitamin B₁, vitamin B₂, vitamin B₆, and biotin were not. All liver concentrations of vitamins were increased in diabetic rats above those in control rats. These results showed that streptozotocin-induced diabetes increased urinary excretion of water-soluble vitamins, though their blood and liver concentrations were essentially maintained in the rats.

  18. Excitons, biexcitons, and phonons in ultrathin CdSe/ZnSe quantum structures

    DEFF Research Database (Denmark)

    Gindele, F.; Woggon, Ulrike; Langbein, Wolfgang Werner

    1999-01-01

    The optical properties of CdSe nanostructures grown by migration-enhanced epitaxy of CdSe on ZnSe are studied by time-, energy-, and temperature-dependent photoluminescence and excitation spectroscopy, as well as by polarization-dependent four-wave mixing and two-photon absorption experiments...

  19. Effects of Increasing Doses of UV-B on Main Phenolic Acids Content, Antioxidant Activity and Estimated Biomass in Lavandin (Lavandula x intermedia).

    Science.gov (United States)

    Usano-Alemany, Jaime; Panjai, Lachinee

    2015-07-01

    Lavandin is a well-known aromatic plant cultivated mainly for its valuable essential oil. Nonetheless, little attention has been paid so far to the quantification of other natural products such as polyphenols. Accordingly, we examined the effect of increasing doses of UV-B radiation on the main phenolic content, antioxidant activity and estimated biomass of one year old lavandin pots compared with pots grown outdoors. Significantly higher total phenolic content and concentration of main polyphenols have been found in outdoor plants. Rosmarinic acid has been described as the major phenolic compound in methanolic extracts (max. 25.9 ± 9.7 mg/g(-1) DW). Furthermore, we found that increasing doses of UV-B promote the plant growth of this species as well as the accumulation of phenolic compounds although with less antioxidant capacity in scavenging DPPH radicals. On the other hand, our results showed a remarkable variability among individual plants regarding the content of major phenolic acids. The application of UV-B doses during plant growth could be a method to promote biomass in this species along with the promotion of higher content of valuable secondary metabolites.

  20. Effect of increased natural radiation background on glycogen content of peripheral blood leukocytes of microtus oeconomus Pall

    International Nuclear Information System (INIS)

    Materij, L.D.; Maslova, K.I.

    1984-01-01

    In experiments on Microtus oeconomus Pall, living in natural conditions with normal (0.72-1.08 pA/kg) and increased (3.6-1440 pA/kg) levels of external gamma-radiation and affected by numerous incorporated radionuclides, the differences were detected, by the cytochemical method, both in the total glycogen content of eucocytes and in the type of grouping of cells depending on the cegre of their saturation with polysaccharide

  1. The Integration of Language and Content: Form-Focused Instruction in a Content-Based Language Program

    Directory of Open Access Journals (Sweden)

    Antonella Valeo

    2013-06-01

    Full Text Available Abstract This comparative, classroom-based study investigated the effect and effectiveness of introducing a focus on form approach to a content-based, occupation-specific language program for adults. Thirty-six adults in two classes participated in a 10-week study. One group of 16 adults received content-based instruction that included a focus on form component while the other group of 20 adults received the same content-based instruction with a focus on meaning only. Pre-tests/post-tests/delayed post-tests measured learning of two grammatical forms, the present conditional and the simple past tense, as well as occupational content knowledge. Results indicated significant gains on most of the language measures for both learner groups but significant advantages for the form-focused group on the content knowledge tests. The results are discussed in relation to the impact of specific strategies designed to focus on form and the relationship between attention to form and comprehension of content in the context of content-based language programs. Résumé Cette étude comparative menée en salle de classe a examiné l'effet et l'efficacité d’un enseignement mettant l’accent sur ​​la forme dans un programme de langues professionnelles pour adultes. Trente-six apprenants de deux classes intactes ont participé à cette recherche pendant 10 semaines. Un groupe de 16 personnes a reçu les instructions qui se concentraient sur la forme, tandis que l'autre groupe de 20 personnes a reçu les mêmes instructions qui portaient sur ​​le sens seulement. Des pré-tests, des post-tests ainsi que des post-tests retardés ont mesuré l'apprentissage de la langue et du contenu de deux traits grammaticaux; premièrement, la connaissance du conditionnel et du passé et, deuxièmement, la connaissance du contenu professionnel. Les résultats ont indiqué une amélioration sensible de la plupart des compétences linguistiques pour les deux groupes d

  2. Composition-controlled optical properties of colloidal CdSe quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Ayele, Delele Worku [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Department of Chemistry, Bahir Dar University, Bahir Dar (Ethiopia); Su, Wei-Nien, E-mail: wsu@mail.ntust.edu.tw [Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Chou, Hung-Lung [Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Pan, Chun-Jern [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Hwang, Bing-Joe, E-mail: bjh@mail.ntust.edu.tw [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); National Synchrotron Radiation Research Center, Hsinchu 300, Taiwan (China)

    2014-12-15

    Graphical abstract: - Highlights: • The surface of CdSe QDs are modified with cadmium followed by selenium. • The optical properties of CdSe QDs can be controlled by manipulating the composition. • Surface compositional change affects the surface defects or traps and recombination. • The surface trapping state can be controlled by tuning the surface composition. • A change in composition shows a change in the carrier life time. - Abstract: A strategy with respect to band gap engineering by controlling the composition of CdSe quantum dots (QDs) is reported. After the CdSe QDs are prepared, their compositions can be effectively manipulated from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich QDs. To obtain Cd-rich CdSe QDs, Cd was deposited on equimolar CdSe QDs. Further deposition of Se on Cd-rich CdSe QDs produced Se-rich CdSe QDs. The compositions (Cd:Se) of the as-prepared CdSe quantum dots were acquired by Energy-dispersive X-ray spectroscopy (EDX). By changing the composition, the overall optical properties of the CdSe QDs can be manipulated. It was found that as the composition of the QDs changes from 1:1 (Cd:Se) CdSe to Cd-rich and then Se-rich CdSe, the band gap decreases along with a red shift of UV–vis absorption edges and photoluminescence (PL) peaks. The quantum yield also decreases with surface composition from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich, largely due to the changes in the surface state. Because of the involvement of the surface defect or trapping state, the carrier life time increased from the 1:1 (Cd:Se) CdSe QDs to the Cd-rich to the Se-rich CdSe QDs. We have shown that the optical properties of CdSe QDs can be controlled by manipulating the composition of the surface atoms. This strategy can potentially be extended to other semiconductor nanocrystals to modify their properties.

  3. Composition-controlled optical properties of colloidal CdSe quantum dots

    International Nuclear Information System (INIS)

    Ayele, Delele Worku; Su, Wei-Nien; Chou, Hung-Lung; Pan, Chun-Jern; Hwang, Bing-Joe

    2014-01-01

    Graphical abstract: - Highlights: • The surface of CdSe QDs are modified with cadmium followed by selenium. • The optical properties of CdSe QDs can be controlled by manipulating the composition. • Surface compositional change affects the surface defects or traps and recombination. • The surface trapping state can be controlled by tuning the surface composition. • A change in composition shows a change in the carrier life time. - Abstract: A strategy with respect to band gap engineering by controlling the composition of CdSe quantum dots (QDs) is reported. After the CdSe QDs are prepared, their compositions can be effectively manipulated from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich QDs. To obtain Cd-rich CdSe QDs, Cd was deposited on equimolar CdSe QDs. Further deposition of Se on Cd-rich CdSe QDs produced Se-rich CdSe QDs. The compositions (Cd:Se) of the as-prepared CdSe quantum dots were acquired by Energy-dispersive X-ray spectroscopy (EDX). By changing the composition, the overall optical properties of the CdSe QDs can be manipulated. It was found that as the composition of the QDs changes from 1:1 (Cd:Se) CdSe to Cd-rich and then Se-rich CdSe, the band gap decreases along with a red shift of UV–vis absorption edges and photoluminescence (PL) peaks. The quantum yield also decreases with surface composition from 1:1 (Cd:Se) CdSe QDs to Cd-rich and then to Se-rich, largely due to the changes in the surface state. Because of the involvement of the surface defect or trapping state, the carrier life time increased from the 1:1 (Cd:Se) CdSe QDs to the Cd-rich to the Se-rich CdSe QDs. We have shown that the optical properties of CdSe QDs can be controlled by manipulating the composition of the surface atoms. This strategy can potentially be extended to other semiconductor nanocrystals to modify their properties

  4. Glass formation and the third harmonic generation of Cu{sub 2}Se–GeSe{sub 2}–As{sub 2}Se{sub 3} glasses

    Energy Technology Data Exchange (ETDEWEB)

    Reshak, A. H., E-mail: maalidph@yahoo.co.uk [New Technologies-Research Centre, University of West Bohemia, Univerzitni 8, 306 14 Pilsen (Czech Republic); Center of Excellence Geopolymer and Green Technology, School of Material Engineering, University Malaysia Perlis, 01007 Kangar, Perlis (Malaysia); Klymovych, O. S.; Zmiy, O. F. [Department of Inorganic and Physical Chemistry, Lesya Ukrainka Eastern European National University, Voli Av. 13, 43025 Lutsk (Ukraine); Myronchuk, G. L.; Zamuruyeva, O. V. [Department of Physics, Lesya Ukrainka Eastern European National University, Voli Av. 13, 43025 Lutsk (Ukraine); Alahmed, Z. A. [Department of Physics and Astronomy, King Saud University, Riyadh 11451 (Saudi Arabia); Chyský, J.; Bila, Jiri [Department of Instrumentation and Control Engineering, Faculty of Mechanical Engineering, CTU in Prague, Technicka 4, 166 07 Prague 6 (Czech Republic); Kamarudin, H. [Center of Excellence Geopolymer and Green Technology, School of Material Engineering, University Malaysia Perlis, 01007 Kangar, Perlis (Malaysia)

    2014-10-14

    We have performed the investigation of the nonlinear optical properties namely the third harmonic generation (THG) of the glass-formation region in the Cu{sub 2}Se–GeSe{sub 2}–As{sub 2}Se{sub 3} system. The samples were synthesized by direct single-temperature method from high-purity elementary substances. We have found that the value of disorder parameter Δ depends on the composition of the glassy alloys. The measurements show that increasing the Cu{sub 2}Se concentration leads to increased slope of the absorption edge, which may be explained by the decrease of the height of random potential relief for the electrons in the tails of the state density which border the band edges. A very sharp increase in the THG at low temperature was observed. Significant enhancement in THG was obtained with decreasing the energy gap, which agreed well with the nonlinear optical susceptibilities obtained from other glasses.

  5. Influence of Compensating Defect Formation on the Doping Efficiency and Thermoelectric Properties of Cu2ySe1xBrx

    Science.gov (United States)

    2015-09-24

    level spectra (Figure S3b). The relative contents of Cu to Se were determined using a Thermo- Finnigan ELEMENT2 single collector sector field...has a wide range of stoichiometric deviation (Cu2−δSe). 17,22,23 Above 410 K, the compound has an average cubic structure with Se ions forming a face...extrinsically, and a single parabolic band model can be applied to analyze the transport and predict the optimum carrier densities for a maximum figure of

  6. Improved photoluminescence quantum yield and stability of CdSe-TOP, CdSe-ODA-TOPO, CdSe/CdS and CdSe/EP nanocomposites

    Science.gov (United States)

    Wei, Shutian; Zhu, Zhilin; Wang, Zhixiao; Wei, Gugangfen; Wang, Pingjian; Li, Hai; Hua, Zhen; Lin, Zhonghai

    2016-07-01

    Size-controllable monodisperse CdSe nanocrystals with different organic capping were prepared based on the hot-injection method. The effective separation of nucleation and growth was achieved by rapidly mixing two highly reactive precursors. As a contrast, we prepared CdSe/CdS nanocrystals (NCs) successfully based on the selective ion layer adsorption and reaction (SILAR) technique. This inorganic capping obtained higher photoluminescence quantum yield (PLQY) of 59.3% compared with organic capping of 40.8%. Furthermore, the CdSe-epoxy resin (EP) composites were prepared by adopting a flexible ex situ method, and showed excellent stability in the ambient environment for one year. So the composites with both high PLQY of nanocrystals and excellent stability are very promising to device application.

  7. The Development and User Satisfaction Evaluation of Internet-Based N-Screen Healthcare Walking Content to Increase Continuous Usage Motivation.

    Science.gov (United States)

    Youm, Sekyoung

    2015-08-01

    The purpose of the current study is (1) to apply Internet-based N-Screen (this is used like the term "emultiscreen"; as the technology that provides services of shared content or application via N devices, it includes all screens such as personal computers [PCs], TV, and mobile devices) services to healthcare services by developing games for improving one's health and (2) to present ways to activate the use of health promotion contents in the future by investigating user satisfaction and whether there is any intention to accept the contents and/or use the services continuously. In order to evaluate the customized health maintenance content provided by the healthcare walking system developed in the current study, 98 adult men and women residing in Seoul, Korea, were instructed to use 10 minutes' worth of the walking content. Perceived quality, level of trust in the results, effectiveness of the exercise, and overall satisfaction were measured in regard to the N-Screen-based walking content, including those for the cell phone, PC, and Internet protocol TV (IPTV). Walking contents using N-Screen services were perceived with high levels of trust in the results of the exercise, the effectiveness of the exercise, and overall satisfaction. In terms of the usability of N-Screen services, the younger the participants, the more usable they found the mobile or PC programs. The older the participants, the more usable they found the IPTV screens, although they still struggled with using the content given; operating IPTVs proved to be difficult for them. Furthermore, participants who were engaged in exercise on a regular basis were less satisfied with the program, in general. The present study has developed a walking system using N-Screen programs to make the most common and effective forms of exercise-walking and running-accessible indoors. This may increase motivation to exercise by offering services that boost one's interest in exercising, such as personal monitoring and real

  8. The efficiency of different types of wood charcoal on increasing carbon content on surfaces of low carbon steel in the pack carburizing process

    Directory of Open Access Journals (Sweden)

    Narongsak Thammachot

    2014-09-01

    Full Text Available The purpose of this research is to compare the efficiency of five types of wood charcoal, eucalyptus, coconut shell, tamarind, bamboo and cassava root in increasing carbon content on surfaces of low carbon steel by the pack carburizing process. The experiment for pack carburized low carbon steel (grade AISI 1020 was conducted by using the different wood charcoals as carburizers, mixed with 10% limestone (by weight as the energizer. The carburizing temperature of 950°C, and carburizing times of 2, 4 and 6 hours were used in the experiment. After grinding, the specimens in each case were checked for carbon content by optical emission spectroscopy. Micro-Vickers hardness testing and microstructure inspections were carried out. The results of the experiment showed that the efficiency of eucalyptus charcoal as the carburizer (for increasing carbon content on surfaces of low carbon steel was higher than that of tamarind, cassava root, coconut shell and bamboo charcoals. The averages for carbon content were: 1.16, 1.06, 0.97, 0.83 and 0.77% respectively.

  9. Synthesis of selenium/EDTA-derived porous carbon composite as a Li–Se battery cathode

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Chenhao, E-mail: zhaochenhao123456@163.com; Fang, Shuzhen; Hu, Zhibiao, E-mail: zhibiaohu@163.com; Qiu, Sheng’en; Liu, Kaiyu [LongYan University, College of Chemistry & Materials Science (China)

    2016-07-15

    The carbon substrate with unique 3D macroporous structure has been prepared through the immediate carbonization of ethylenediaminetetraacetic acid (EDTA) and KOH mixture. The porous carbon composed of micro- and small mesoporous (2–5 nm) structure has a BET specific surface area of 1824.8 m{sup 2} g{sup −1}. The amorphous and nanosized Se is uniformly encapsulated into the porous structure of porous carbon using melting diffusion route, and the weight content of Se in target Se/C composite can be as high as ~50 %. As an Li–Se battery cathode, the Se/C composite delivers a reversible (2nd) discharge capacity of 597.4 mAh g{sup −1} at 0.24C and retains a discharge capacity of 538.4 mAh g{sup −1} at 0.24C after 100 cycles. Furthermore, the composite also has a stable capacity of 291.0 mAh g{sup −1} at a high current of 4.8C. The high specific area and good porous size of EDTA-derived carbon substrate may a be responsibility for the excellent electrochemical performances of Se/C composite.

  10. Thermoelectric transport of Se-rich Ag2Se in normal phases and phase transitions

    International Nuclear Information System (INIS)

    Mi, Wenlong; Lv, Yanhong; Qiu, Pengfei; Shi, Xun; Chen, Lidong; Zhang, Tiansong

    2014-01-01

    Small amount of Se atoms are used to tune the carrier concentrations (n H ) and electrical transport in Ag 2 Se. Significant enhancements in power factor and thermoelectric figure of merit (zT) are observed in the compositions of Ag 2 Se 1.06 and Ag 2 Se 1.08 . The excessive Se atoms do not change the intrinsically electron-conducting character in Ag 2 Se. The detailed analysis reveals the experiment optimum carrier concentration in Ag 2 Se is around 5 × 10 18  cm −3 . We also investigate the temperature of maximum zT and the thermoelectric transport during the first order phase transitions using the recently developed measurement system

  11. Dual-bath electrodeposition of n-type Bi–Te/Bi–Se multilayer thin films

    Energy Technology Data Exchange (ETDEWEB)

    Matsuoka, Ken; Okuhata, Mitsuaki; Takashiri, Masayuki, E-mail: takashiri@tokai-u.jp

    2015-11-15

    N-type Bi–Te/Bi–Se multilayer thin films were prepared by dual-bath electrodeposition. We varied the number of layers from 2 to 10 while the total film thickness was maintained at approximately 1 μm. All the multilayer films displayed the X-ray diffraction peaks normally observed from individual Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} crystal structures, indicating that both phases coexist in the multilayer. The cross-section of the 10-layer Bi–Te/Bi–Se film was composed of stacked layers with nano-sized grains but the boundaries between the layers were not planar. The Seebeck coefficient was almost constant throughout the entire range of our experiment, but the electrical conductivity of the multilayer thin films increased significantly as the number of layers was increased. This may be because the electron mobility increases as the thickness of each layer is decreased. As a result of the increased electrical conductivity, the power factor also increased with the number of layers. The maximum power factor was 1.44 μW/(cm K{sup 2}) for the 10-layer Bi–Te/Bi–Se film, this was approximately 3 times higher than that of the 2-layer sample. - Highlights: • N-type Bi–Te/Bi–Se multilayer thin films were deposited by electrodeposition. • We employed a dual-bath electrodeposition process for preparing the multilayers. • The Bi–Te/Bi–Se film was composed of stacked layers with nano-sized grains. • The electrical conductivity increased as the number of layers was increased. • The power factor improved by 3 times as the number of layers was increased.

  12. Soybean meal fermented by Aspergillus awamori increases the cytochrome P-450 content of the liver microsomes of mice.

    Science.gov (United States)

    Kishida, T; Ataki, H; Takebe, M; Ebihara, K

    2000-04-01

    The effect of soybean meal fermented by Aspergillus awamori on the acute lethality of acetaldehyde, pentobarbital sleeping time, and cytochrome P-450 content of the hepatic microsomes was studied in mice. Most of the daidzin and genistin in soybean meal (SBM) were converted into the respective aglycones, daidzein and genistein, by fermentation. In experiment 1, mice were fed isonitrogenic test diets with one of the following five protein sources for 28 d: casein, SBM, fermented and hot-air-dried SBM (FSBM-HD), fermented and freeze-dried SBM (FSBM-FD), or methanol-extracted FSBM-FD (FSMB-FD-R). The acute lethality of acetaldehyde in mice fed the FSBM-FD diet was significantly lower than that in mice fed the SBM, FSBM-HD, or FSBM-FD-R diet. In experiments 2 and 3, mice were fed isonitrogenic test diets with one of the following four protein sources for 28 d: casein, SBM, FSBM-FD, and FSBM-FD-R. The pentobarbital sleeping time was significantly shorter and the cytochrome P-450 content was significantly higher in the mice fed the FSBM-FD diet than the respective value in mice fed the other test diets. In experiment 4, mice were fed one of eight diets which contained different levels of aglycone obtained by varying the proportion of FSBM-FD and FSBM-FD-R, for 28 d. The cytochrome P-450 content in hepatic microsomes increased as the dietary level of isoflavonoid aglycones increased, but there was a saturation phenomenon. These results suggest that soy isoflavonoid aglycones are more potent inducers of cytochrome P-450 than isoflavonoid glycosides.

  13. Structural, morphological and optical properties of pulsed laser deposited ZnSe/ZnSeO3 thin films

    Science.gov (United States)

    Hassan, Syed Ali; Bashir, Shazia; Zehra, Khushboo; Salman Ahmed, Qazi

    2018-04-01

    The effect of varying laser pulses on structural, morphological and optical behavior of Pulsed Laser Deposited (PLD) ZnSe/ZnSeO3 thin films has been investigated. The films were grown by employing Excimer laser (100 mJ, 248 nm, 18 ns, 30 Hz) at various number of laser pulses i.e. 3000, 4000, 5000 and 6000 with elevated substrate temperature of 300 °C. One film was grown at Room Temperature (RT) by employing 3000 number of laser pulses. In order to investigate the structural analysis of deposited films, XRD analysis was performed. It was observed that the room temperature is not favorable for the growth of crystalline film. However, elevated substrate temperature to 300°C, two phases with preferred orientation of ZnSeO3 (2 1 2) and ZnSe (3 3 1) were identified. AFM and SEM analysis were performed to explore the surface morphology of grown films. Morphological analysis also confirmed the non-uniform film growth at room temperature. At elevated substrate temperature (300 °C), the growth of dendritic rods and cubical crystalline structures are observed for lower number of laser pulses i.e. 3000 and 4000 respectively. With increased number of pulses i.e. 5000 and 6000, the films surface morphology becomes smooth which is confirmed by measurement of surface RMS roughness. Number of grains, skewness, kurtosis and other parameters have been evaluated by statistical analysis. In order to investigate the thickness, and optical properties of deposited films, ellipsometery and UV–Vis spectroscopy techniques were employed. The estimated band gap energy is 2.67 eV for the film grown at RT, whereas band gap values varies from 2.80 eV to 3.01 eV for the films grown at 300 °C with increasing number of laser pulses.

  14. Membrane leakage and increased content of Na+ -K+ pumps and Ca2+ in human muscle after a 100-km run

    DEFF Research Database (Denmark)

    Overgaard, Kristian; Lindstrøm, Tue; Ingemann-Hansen, Thorsten

    2002-01-01

    content, and plasma concentrations of creatine kinase (CK) and lactate dehydrogenase (LDH). After completion of a 100-km run, significant increases were found in plasma K+ (from 4.0 +/- 0.1 to 5.5 +/- 0.2 mM, P

  15. Contenha-se, se for capaz

    Directory of Open Access Journals (Sweden)

    Mirna Feitoza Pereira

    2008-11-01

    Full Text Available Em O Instinto da Linguagem, Steven Pinker discorre sobre sua célebre tese: a linguagem não é a mais prodigiosa invenção cultural humana. Ela é uma peça da constituição biológica do cérebro. A linguagem é uma habilidade complexa e especializada, que se desenvolve espontaneamente na criança, sem qualquer esforço consciente ou instrução formal, que se manifesta sem que se perceba sua lógica subjacente, que é qualitativamente a mesma em todo indiví­duo, e que difere de capacidades mais gerais de processamento de informações ou de comportamento inteligente. Para Pinker, a concepção de linguagem como um tipo de instinto transmite a idéia de que as pessoas sabem falar mais ou menos da mesma maneira que as aranhas sabem tecer suas teias. Ele apóia suas idéias em Darwin e Chomsky. Palavras-chave linguagem, gramática universal, evolução Abstract In Language Instinct, Steven Pinker argues about his famous thesis: language is not the most prodigious human cultural invention. It is a distinct piece of the biological constitution of the brain. Language is a complex, specialized skill, which develops spontaneously in the child, without conscious effort or formal instruction. It reveals itself without awareness of its underlying logic, which is qualitatively the same in every individual, and which is distinct from more general abilities of information processing of intelligent behavior. According to Pinker, the conception of language as a kind of instinct conveys the idea that people know how to talk in more or less the same way as spiders know how to spin webs. His thesis is founded in Darwin and Chomsky-s theories. Keywords language, universal grammar, evolution

  16. Students using mobile phones in the classroom: Can the phones increase content learning

    Science.gov (United States)

    Rinehart, David Lee

    A study was conducted at a high-performing school in Southern California to explore the effects on learning content from students using their own smart phones in and out of the classroom. The study used a Switching Replications design format which allowed two independent analyses of posttest scores between a group using e-flash cards on smart phones and a group using paper flash cards. Quantitative data was collected via two tailed, t-tests and qualitative data was collected through observations and interviews. Results suggest that knowledge level learning may be increased with mobile phone use, but no effect on comprehension level learning was found. Students found the phones to be convenient in accessing flash cards anytime and anywhere. Enthusiasm for using the phones in class while initially high waned over the 1 month study duration. Students perceived the phones to not be a significant source of distraction outside of class.

  17. Palm kernel expeller increases milk fat content when fed to grazing ...

    African Journals Online (AJOL)

    van Wyngaard, Josef

    2017-03-13

    Mar 13, 2017 ... blocks to one of four treatment concentrates: PKE0, PKE10, PKE20, and PKE30, .... Milk fat, protein, lactose, and milk urea nitrogen (MUN) content were ... added heat-stable alpha-amylase (protein enzyme EC 3.2.1.1) (1 ...

  18. Effects of Interaction between Cadmium (Cd) and Selenium (Se) on Grain Yield and Cd and Se Accumulation in a Hybrid Rice (Oryza sativa) System.

    Science.gov (United States)

    Huang, Baifei; Xin, Junliang; Dai, Hongwen; Zhou, Wenjing

    2017-11-01

    A pot experiment was conducted to investigate the interactive effects of cadmium (Cd) and selenium (Se) on their accumulation in three rice cultivars, which remains unclear. The results showed that Se reduced Cd-induced growth inhibition, and increased and decreased Se and Cd concentrations in brown rice, respectively. Cadmium concentrations in all tissues of the hybrid were similar to those in its male parent yet significantly lower than those in its female parent. Selenium reduced Cd accumulation in rice when Cd concentration exceeded 2.0 mg kg -1 ; however Se accumulation depended on the levels of Cd exposure. Finally, Cd had minimal effect on Se translocation within the three cultivars. We concluded that Cd concentration in brown rice is a heritable trait, making crossbreeding a feasible method for cultivating high-yield, low-Cd rice cultivars. Selenium effectively decreased the toxicity and accumulation of Cd, and Cd affected Se uptake but not translocation.

  19. EPR of SeO2- and SeO3- radicals in alkaline borate glasses with 77Se isotope

    International Nuclear Information System (INIS)

    Galimov, D.G.; Tarzimanov, K.D.

    1977-01-01

    Alkaline borate glasses with 77 Se were investigated in order to establish the nature of selenium compounds and radicals in glasses. The relationship between alkali ions and the oxygen radical of selenium was determined by decoding the hyperfine structure of the alkaline borate glass EPR spectra obtained before and after γ-irradiation. The irradiated and non-irradiated glasses were characterized by hyperfine splitting of the EPR lines from the α- and β centres. Moreover, the irradiated samples were noted to have a line doublet (signal phi). With intenser reduction conditions of glass fusion, the intensities of α, β, and phi signals were noted to decline. This confirmes the suggestion that these centres were caused by oxygen compouds. The authors concluded that α and β signals were due to the paramagnetic centres of SeO 2 - and [SeO 2 - ]R + , and phi signal to the SeO 3 - radicals

  20. Timely resolved measurements on CdSe nanoparticles; Zeitaufgeloeste Messungen an CdSe Nanopartikeln

    Energy Technology Data Exchange (ETDEWEB)

    Holt, B.E. von

    2006-06-06

    By means of infrared spectroscopy the influence of the organic cover on structure and dynamics of CdSe nanoparticles was studied. First a procedure was developed, which allows to get from the static infrared spectrum informations on the quality of the organic cover and the binding behaviour of the ligands. On qualitatively high-grade and well characterized samples thereafter the dynamics of the lowest-energy electron level 1S{sub e} was time-resolvedly meausred in thew visible range. As reference served CdSe TOPO, which was supplemented by samples with the ligands octanthiole, octanic acid, octylamine, naphthoquinone, benzoquinone, and pyridine. The studied nanoparticles had a diameter of 4.86 nm. By means of the excitation-scanning or pump=probe procedure first measurements in the picosecond range were performed. The excitation wavelengths were thereby spectrally confined and so chosen that selectively the transitions 1S{sub 3/2}-1S-e and 1P{sub 3/2}-1P{sub e} but not the intermediately lyingt transition 2S{sub 3/2}-1S{sub e} were excited. The excitation energies were kept so low that the excitation of several excitons in one crystal could be avoided. The scanning wavelength in the infrared corresponded to the energy difference between the electron levels 1S{sub e} and 1P{sub e}. The transients in the picosecond range are marked by a steep increasement of the signal, on which a multi-exponential decay follows. The increasement, which reproduces the popiulation of the excited state, isa inependent on the choice of the ligands. The influence of the organic cover is first visible in the different decay times of the excited electron levels. the decay of the measurement signal of CdSe TOPO can be approximatively described by three time constants: a decay constant in the early picosecond region, a time constant around hundert picoseconds, and a time constant of some nanoseconds. At increasing scanning wavelength the decay constants become longer. By directed excitation

  1. Oxygen reduction reaction on carbon-supported CoSe2 nanoparticles in an acidic medium

    International Nuclear Information System (INIS)

    Feng Yongjun; He Ting; Alonso-Vante, Nicolas

    2009-01-01

    We investigated the effect of CoSe 2 /C nanoparticle loading rate on oxygen reduction reaction (ORR) activity and H 2 O 2 production using the rotating disk electrode and the rotating ring-disk electrode techniques. We prepared carbon-supported CoSe 2 nanoparticles with different nominal loading rates and evaluated these samples by means of powder X-ray diffraction. All the catalysts had an OCP value of 0.81 V vs. RHE. H 2 O 2 production during the ORR process decreased with an increase in catalytic layer thickness. This decrease was related to the CoSe 2 loading on the disk electrode. H 2 O 2 production also decreased with increasing catalytic site density, a phenomenon related to the CoSe 2 loading rate on the carbon substrate. The cathodic current density significantly increased with increasing catalytic layer thickness, but decreased with increasing catalytic site density. In the case of 20 wt% CoSe 2 /C nanoparticles at 22 μg cm -2 , we determined that the transfer process involves about 3.5 electrons.

  2. Structure and photoelectrochemistry of silver-copper-indium-diselenide ((AgCu)InSe2) thin film

    Science.gov (United States)

    Zhang, Lin Rui; Li, Tong; Wang, Hao; Pang, Wei; Chen, Yi Chuan; Song, Xue Mei; Zhang, Yong Zhe; Yan, Hui

    2018-02-01

    In this work, silver (Ag) precursors with different thicknesses were sputtered on the surfaces of CuIn alloys, and (AgCu)InSe2 (ACIS) films were formed after selenization at 550 °C under nitrogen condition using a rapid thermal process furnace. The structure and electrical properties of the ACIS films were investigated. The result showed that the distribution of Ag+ ion was more uniform with increasing the thickness of Ag precursor, and the surface of the thin-film became more homogeneous and denser. When Ag/Cu ratio ≥0.249, the small grain particles disappeared. The band gap can be rationally controlled by adjusting Ag content. When (Ag + Cu)/In ratio ≥ 1.15, the surface of the ACIS thin-film mainly exhibited n-type semiconductor. Through the photoelectrochemistry measurement, it was observed that the incorporation of Ag+ ions could improve photocurrent by adjusting the band gap. With the Ag precursor thickness increased, the dark current decreased at the more negative potential.

  3. Effect of Te doping on superconductivity and charge-density wave in dichalcogenides 2H-NbSe2-χTeχ(χ=0,0.1,0.2)

    Institute of Scientific and Technical Information of China (English)

    Wang Hong-Tao; Li Lin-Jun; Ye De-shu; Cheng Xin-Hong; Xu Zhu-An

    2007-01-01

    Single crystals of Te-doped dichalcogenides 2H-NbSe2-χTeχ(χ=0,0.10,0.20)were grown by vapour transport method.The effect of Te doping on the superconducting and charge-density wave(CDW)transitions has been investigated.The sharp decrease of residual resistance ratio,RRR=R(300K)/R(8K),with increasing Te content was observed,indicating that the disorder in the conducting plane is induced by Te doping.Meanwhile the superconducting transition temperature,Tc,decreases monotonically with Te content.However,the CDW transition temperature,TCDW,shown by a small jump in the temperature dependence of the resistivity near 30 K,increases slightly.The results show that the suppression of superconductivity might be caused by the enhancement of CDW ordering.The disorder has little influence on the CDW ordering.

  4. Specific heat and magnetic properties of single-crystalline ZnxDyyCrzSe4 spinels

    International Nuclear Information System (INIS)

    Jendrzejewska, Izabela; Groń, Tadeusz; Maciążek, Ewa; Duda, Henryk; Kubisztal, Marian; Ślebarski, Andrzej; Pietrasik, Ewa; Fijałkowski, Marcin

    2016-01-01

    The crystal structure, magnetic isotherm, magnetic susceptibility, electrical conductivity and specific heat measurements for single-crystalline Zn x Dy y Cr z Se 4 (where x+y+z≈3) spinels are presented. A semiconducting behavior with the activation energy of 0.53 eV, an antiferromagnetic order with a Néel temperature T N =22 K and a strong ferromagnetic exchange evidenced by a positive Curie–Weiss temperature θ=79, 71 and 70 K with increasing Dy-content in the sequence 0.05, 0.13 and 0.19 were established. Below T N the magnetic field dependence of magnetization, M(H), shows two peaks at critical fields H c1 and H c2 . The values of H c1 decrease slightly with temperature, especially for the larger Dy-content, while the values of H c2 drop rapidly with temperature. The magnetic contribution to the specific heat displays a sharp peak at T N , which is strongly shifted to much lower temperatures in the applied magnetic fields. Similar behavior was found for the temperature dependence of the specific heat C(T) plotted as C(T)/T vs. T. The value of the magnetic and phonon contribution to the entropy at T N and at H=0 is only ∼4.8, ∼4.4 and ∼4.2 J mol −1 K −1 /Cr 3+ for y=0.05, 0.13 and 0.19, respectively, much lower than the average magnetic contribution S m =(z/2)Rln(2S+1)=12.33 J mol −1 K −1 /Cr 3+ calculated for Cr 3+ ion with S=3/2, as the dysprosium one is paramagnetic. - Highlights: • Dy-substitution does not affect the Cr 3+ 3d 3 electronic configuration and AFM order. • The larger Dy-content, the smaller FM short-range interactions. • The magnetic and phonon contribution to the entropy decreases as Dy-content increases.

  5. Far-Infrared Absorption of PbSe Nanorods

    KAUST Repository

    Hyun, Byung-Ryool; Bartnik, A. C.; Koh, Weon-kyu; Agladze, N. I.; Wrubel, J. P.; Sievers, A. J.; Murray, Christopher B.; Wise, Frank W.

    2011-01-01

    Measurements of the far-infrared absorption spectra of PbSe nanocrystals and nanorods are presented. As the aspect ratio of the nanorods increases, the Fröhlich sphere resonance splits into two peaks. We analyze this splitting with a classical

  6. Toxicological implications of selenium nanoparticles with different coatings along with Se4+ on Lemna minor.

    Science.gov (United States)

    Tarrahi, Roshanak; Khataee, Alireza; Movafeghi, Ali; Rezanejad, Farkhondeh; Gohari, Gholamreza

    2017-08-01

    Nanoparticles have potential high risks for living organisms in the environment due to their specific qualities and their easy access. In the present study, selenium nanoparticles (Se NPs) with two different coatings (l-cysteine and tannic acid) were synthesized. The characteristics of particles were analyzed using XRD, FT-IR and SEM. The impact of the nanoparticles besides Se 4+ , on the aquatic higher plant Lemna minor was evaluated and compared. Entrance of l-cysteine and tannic acid capped Se NPs in the roots of Lemna minor was proved by TEM and fluorescence microscopy. Adverse effects of mentioned NPs and differences of these effects from those by sodium selenite as the ionic form were assessed by a range of biophysicochemical tests. Altogether, the results asserted that Lemna minor was notably poisoned by both capped Se NPs and Se 4+ . Thus, growth and photosynthetic pigments were decreased while lipid peroxidation along with total phenol and flavonoid contents were raised. Eventually some changes in enzymatic activities were presented. To sum up the consequences, it can be concluded that all changes occurred due to the plant defense system especially in order to remove reactive oxygen species (ROS) and possible phytotoxicity originated by l- cysteine and tannic acid capped Se NPs in addition to Se 4+ . The influence of tannic acid capped Se NPs after sodium selenite is stronger by the means of antioxidant enzymes activity in comparison with l-cysteine capped Se NPs. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Se-Se isoelectronic centers in high purity CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Najjar, Rita; Andre, Regis; Mariette, Henri [CEA-CNRS, Nanophysique et Semiconducteurs, Institut Neel, 25 rue des martyrs, 38042 Grenoble (France); Golnik, Andrzej; Kossacki, Piotr; Gaj, Jan A. [Institute of Experimental Physics, University of Warsaw, Hoza 69, 00-681 Warsaw (Poland)

    2010-06-15

    We evidence zero-dimensional exciton states trapped on isoelectronic Se centers in CdTe quantum wells, {delta}-doped with Se. Thanks to special precautions taken to have very high purity CdTe heterostructures, it is possible to observe, in photoluminescence spectra, sharp discrete lines arising from individual centers related to the Se doping. These emission lines appear at about 40 meV below the CdTe band gap energy. The most prominent lines are attributed to the recombination of excitons bound to nearest-neighbor selenium pairs in a tetrahedral CdTe environment. This assignment is confirmed by a common linear polarization direction of the emitted light, parallel to <110>. These excitons localized on individual isoelectronic traps are good candidates as single photon emitters (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Whole-plant growth and N utilization in transgenic rice plants with increased or decreased Rubisco content under different CO2 partial pressures.

    Science.gov (United States)

    Sudo, Emi; Suzuki, Yuji; Makino, Amane

    2014-11-01

    Ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) strongly limits photosynthesis at lower CO2 concentration [CO2] whereas [corrected] Rubisco limitation is cancelled by elevated [CO2]. Therefore, increase or reduction in Rubisco content by transformation with a sense or an antisense RBCS construct are expected to alter the biomass production under different CO2 levels. RBCS-sense (125% Rubisco of wild-type) and -antisense (35% Rubisco of wild-type) rice (Oryza sativa L.) plants were grown for 63 days at three different CO2 levels: low [CO2] (28 Pa), normal [CO2] (40 Pa) and elevated [CO2] (120 Pa). The biomass of RBCS-sense plants was 32% and 15% greater at low [CO2] and normal [CO2] than that of the wild-type plants, respectively, but did not differ at elevated [CO2]. Conversely, the biomass of RBCS-antisense plants was the smallest at low [CO2]. Thus, overproduction of Rubisco was effective for biomass production at low [CO2]. Greater biomass production at low [CO2] in RBCS-sense plants was caused by an increase in the net assimilation rate, and associated with an increase in the amount of N uptake. Furthermore, Rubisco overproduction in RBCS-sense plants was also promoted at low [CO2]. Although it seems that low [CO2]-growth additionally stimulates the effect of RBCS overexpression, such a phenomenon observed at low [CO2] was mediated through an increase in total leaf N content. Thus, the dependence of the growth improvement in RBCS-sense rice on growth [CO2] was closely related to the degree of Rubisco overproduction which was accompanied not only by leaf N content but also by whole plant N content. © The Author 2014. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  9. Sample Set (SE): SE30 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE30 Comparison of seed metabolites among soybean varieties Investigation of Glycine max. green seed metabol...ites. 3 varieties (Kamogawashichiri, Koitozairai, Tanbakuro) data are examined. Tak

  10. Sample Set (SE): SE13 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE13 Comparison of leaf metabolites among spinach varieties Investigation of Spinacia oleracea leaf metaboli...tes. 4 cultivers (Nihon, Kanaji, Kurohaminstarland and Wasesaradaakari) and 3 repli

  11. Effects of water vapor introduction during Cu(In1-xGax)Se2 deposition on thin film properties and solar cell performance

    International Nuclear Information System (INIS)

    Ishizuka, S.; Sakurai, K.; Yamada, A.; Matsubara, K.; Shibata, H.; Kojima, T.; Niki, S.; Yonemura, M.; Nakamura, S.; Nakanishi, H.

    2006-01-01

    The effects of water vapor introduction during the growth of Cu(In 1-x Ga x )Se 2 , specifically CuInSe 2 (CISe), Cu(In,Ga)Se 2 (CIGSe), and CuGaSe 2 (CGSe) thin films were studied. We have developed thus far a novel technique to improve CIGSe (x∝0.5) cell performance by means of water vapor introduction during CIGSe deposition. In this study, we have examined the effectiveness of water vapor introduction for other x-compositions (CISe and CGSe). Variations in the electrical properties observed in CIGSe (x∝0.5), that is, increasing hole density and conductivity with water vapor introduction, were also observed in CISe and CGSe. Water vapor introduction affected solar cell performance as well; open circuit voltages, short circuit current densities, and efficiencies were improved. The improvements in cell performance are thought to be related to annihilation of donor defects arising from Se-vacancies by incorporation of oxygen from the water vapor. In addition to this, the sodium content in the CIGSe layers was found to depend on the partial pressure of water vapor during deposition. This result suggests that the improvement mechanism is also related with the so-called 'Na-effects'. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  12. Influence of CdSe layer air-baking on physical properties of CdSe-As2Se3 heterostructures

    International Nuclear Information System (INIS)

    Schauer, F.; Heza, S.; Kosek, F.; Cimpl, Z.

    1980-01-01

    An investigation is made of the influence of the air-baking time on the physical properties of a CdSe layer, which is a part of the heterogeneous structure CdSe-As 2 Se 3 used as a camera tube target. The I-U characteristics, C-U characteristics, the dependence of both the real and imaginary part admittance on frequency, and the photoconductance characteristics are measured. All measurements are carried out on heterostructures prepared with variable air-baking time of the CdSe layer: t =0, 5, 15, 40, and 120 min. The results of measurements contribute to the finding of the optimal production procedure with a minimum baking time of tsub(min) = 15 min. The heterostructures exhibit satisfactory properties. The dark current Isub(d)(U =1 V, T = 300 K) = 10 -10 Acm -2 with a rectification factor g(U = 10 V) = 10 6 and a capacitance C (2 kHz) = 2900 pFcm -2 . (author)

  13. ZnSe MSM photodetectors prepared on GaAs and ZnSe substrates

    International Nuclear Information System (INIS)

    Lin, T.K.; Chang, S.J.; Su, Y.K.; Chiou, Y.Z.; Wang, C.K.; Chang, S.P.; Chang, C.M.; Tang, J.J.; Huang, B.R.

    2005-01-01

    Homoepitaxial and heteroepitaxial ZnSe metal-semiconductor-metal (MSM) photodetectors were both fabricated and characterized. It was found that homoepitaxial ZnSe MSM photodetector could provide us smaller dark current and large photocurrent. With an incident wavelength of 448 nm, it was found that the maximum responsivities for the homoepitaxial and heteroepitaxial ZnSe photodetectors were 0.128 and 0.045 A/W, which corresponds to a quantum efficiency of 36 and 12%, respectively. Furthermore, it was found that we achieved the minimum noise equivalent power (NEP) of 7.6 x 10 -13 W and the maximum normalized detectivity (D *) of 9.3 x 10 11 cm Hz 0.5 W -1 from our homoepitaxial ZnSe photodetector. In contrast, NEP and D * of the heteroepitaxial ZnSe photodetector were 2.9 x 10 -12 W and 2.44 x 10 11 cm Hz 0.5 W -1 , respectively

  14. The influence of CdSe and ZnSe nanoparticles on the optical properties of Sm"3"+ ions in lead borate glasses

    International Nuclear Information System (INIS)

    Mallur, Saisudha B.; Heidorn, William D.; Fatokun, Stephen O.; Joshi, Krishna D.; Bista, Sandip S.; Babu, Panakkattu K.

    2017-01-01

    The effect of glass composition and the presence of CdSe/ZnSe nanoparticles (NPs) on the optical absorption and fluorescence of Sm-doped lead borate glasses are studied. Three sets of glass samples xPbO:(99.5-x) B_2O_3:0.5Sm_2O_3, x = 29.5–69.5 mol%, xPbO:(96.5-x) B_2O_3:0.5Sm_2O_3: 3CdSe/ZnSe, x = 36.5, and 56.5 mol% are prepared. NPs are grown by annealing these glasses just below the glass transition temperature. Average size of both types of NPs increases with annealing time; however, CdSe NPs grew to a larger size range (2 to 20 nm) compared to ZnSe NPs (1 to 16 nm). We analyzed the hypersensitive transition, intensity parameters, radiative transition probability, stimulated emission cross section (σ_p), and the area ratio of the electric dipole/magnetic dipole transitions of Sm"3"+. The intensity parameters show a minimum at 11 h annealing for 36.5 mol% and a maximum for the same annealing duration in 56.5 mol% PbO containing CdSe NPs. The σ_p for 56.5 mol% of PbO with CdSe NPs is found to be a maximum when the average NP size is around 14 nm. ZnSe NPs containing glasses also show significant changes in σ_p when the average particle size is ~16 nm, for 36.5 mol% PbO. Our results suggest that the optical properties of Sm"3"+ in lead borate glasses are sensitive to its electronic environment which can be modified by varying the base glass composition and/or incorporating large NPs of CdSe/ZnSe. The large σ_p values that we observe for some of the glass compositions make them attractive materials for photonic devices and photovoltaic applications.

  15. SE PREVENINDO?

    Directory of Open Access Journals (Sweden)

    Ana Débora Assis Moura

    2010-01-01

    Full Text Available Este estudio tuvo como objetivo verificar el comportamiento de las prostitutas en relación a la prevención de enfermedades de transmisión sexual y del Síndrome de Inmunodeficiencia Adquirida-SIDA, así como investigar cómo se previenen de esas enfermedades. Se trata de una investigación exploratoria, con enfoque cualitativo, llevada a cabo en la Asociación de las Prostitutas en Ceará, Brazil, en septiembre de 2008, a través de una encuesta con 25 prostitutas. El análisis de los datos se hizo según el análisis de contenido, después de ser agrupados en cuatro categorías: conocimiento sobre las enfermedades de transmisión sexual/SIDA; convivencia con la(s enfermedad(es; prevención de la enfermedad de transmisión sexual/SIDA; y el uso de drogas. Se concluyó que las prostitutas no usan preservativos en todas las relaciones sexuales, por lo tanto, las enfermedades de transmisión sexual representan una realidad; la desinformación sobre la(s enfermedad(es es notable; el consumo de drogas lícitas e ilícitas es frecuente entre ellas, factor que las expone a situaciones más vulnerables con relación al VIH/SIDA.

  16. Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

    International Nuclear Information System (INIS)

    Eremenko, M; Budkin, G; Reznitsky, A

    2015-01-01

    We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings. (paper)

  17. Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

    Science.gov (United States)

    Eremenko, M.; Budkin, G.; Reznitsky, A.

    2015-11-01

    We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings.

  18. Determination of the optimal conditions for simultaneous production of 73SE and 75SE radioisotopes in a 30 MeV cyclotron

    International Nuclear Information System (INIS)

    Pejman Rowshanfazad; Amirreza Jalilian; Mahsheed Sabet

    2004-01-01

    enrichment process, due to the presence of arsenic as 75 As(100%) in nature. On the other hand, chemical separation could be carried out in simple, inexpensive methods in a short time, due to the difference between target materials and the products. So the above reactions were taken to be the best choices according to the present conditions and facilities. 2 Cross Section Calculations for 75 As Reactions with Protons. Characterization of excitation function is a very important step for the determination of the projectile beam energy range. Excitation function can be determined by using computer codes such as ALICE (21) or experimental methods. In the present research, performed in the cyclotron department of Atomic Energy Organization of Iran (IBA, Cyclone-30), 75 As reaction cross-sections with protons were calculated for beam energy range of 3-30 MeV (this cyclotron can accelerate protons to 30 MeV energy) using ALICE code and the results were compared with previous experimental data given in the literature (19, 22, 23). The results of this comparison are shown in figure 1. Figure 1 shows a good agreement between the results of ALICE code and the experimental data. The three main reactions were 75 As(p, n) 75 Se, 75 As(p, pn) 74 Se and 75 As(p, 3n) 73 Se. Production of 75 Se began at about 2 MeV and reached its maximum around 12 MeV, where the reaction cross section was about 840 mb. Production of 74 As began around 13 MeV and reached its maximum at about 26 MeV, where the reaction cross section was about 170 mb. 74 As (which was considered as impurity) has a half life of 17.8 days, so it could be easily separated from the product by efficient chemical methods and it was not taken into account while energy selection. Production of 73 Se began at around 22 MeV proton energy and continued to increase while beam energy increased to 30 MeV, where the reaction cross section was about 550 mb. Thus, if the target thickness would be enough to reduce the proton energy from 22 Me

  19. Application of Multivariate Statistical Analysis to Biomarkers in Se-Turkey Crude Oils

    Science.gov (United States)

    Gürgey, K.; Canbolat, S.

    2017-11-01

    Twenty-four crude oil samples were collected from the 24 oil fields distributed in different districts of SE-Turkey. API and Sulphur content (%), Stable Carbon Isotope, Gas Chromatography (GC), and Gas Chromatography-Mass Spectrometry (GC-MS) data were used to construct a geochemical data matrix. The aim of this study is to examine the genetic grouping or correlations in the crude oil samples, hence the number of source rocks present in the SE-Turkey. To achieve these aims, two of the multivariate statistical analysis techniques (Principle Component Analysis [PCA] and Cluster Analysis were applied to data matrix of 24 samples and 8 source specific biomarker variables/parameters. The results showed that there are 3 genetically different oil groups: Batman-Nusaybin Oils, Adıyaman-Kozluk Oils and Diyarbakir Oils, in addition to a one mixed group. These groupings imply that at least, three different source rocks are present in South-Eastern (SE) Turkey. Grouping of the crude oil samples appears to be consistent with the geographic locations of the oils fields, subsurface stratigraphy as well as geology of the area.

  20. APPLICATION OF MULTIVARIATE STATISTICAL ANALYSIS TO BIOMARKERS IN SE-TURKEY CRUDE OILS

    Directory of Open Access Journals (Sweden)

    K. Gürgey

    2017-11-01

    Full Text Available Twenty-four crude oil samples were collected from the 24 oil fields distributed in different districts of SE-Turkey. API and Sulphur content (%, Stable Carbon Isotope, Gas Chromatography (GC, and Gas Chromatography-Mass Spectrometry (GC-MS data were used to construct a geochemical data matrix. The aim of this study is to examine the genetic grouping or correlations in the crude oil samples, hence the number of source rocks present in the SE-Turkey. To achieve these aims, two of the multivariate statistical analysis techniques (Principle Component Analysis [PCA] and Cluster Analysis were applied to data matrix of 24 samples and 8 source specific biomarker variables/parameters. The results showed that there are 3 genetically different oil groups: Batman-Nusaybin Oils, Adıyaman-Kozluk Oils and Diyarbakir Oils, in addition to a one mixed group. These groupings imply that at least, three different source rocks are present in South-Eastern (SE Turkey. Grouping of the crude oil samples appears to be consistent with the geographic locations of the oils fields, subsurface stratigraphy as well as geology of the area.

  1. Stokes shift and fine structure splitting in composition-tunable Zn{sub x}Cd{sub 1−x}Se nanocrystals: Atomistic tight-binding theory

    Energy Technology Data Exchange (ETDEWEB)

    Sukkabot, Worasak, E-mail: w.sukkabot@gmail.com

    2017-02-01

    I report on the atomistic correlation of the structural properties and excitonic splitting of ternary alloy Zn{sub x}Cd{sub 1−x}Se wurtzite nanocrystals using the sp{sup 3}s* empirical tight-binding method with the description of the first nearest neighbouring interaction and bowing effect. Based on a successful model, the computations are presented under various Zn compositions (x) and diameters of alloy Zn{sub x}Cd{sub 1−x}Se nanocrystals with the experimentally synthesized compositions and sizes. With increasing Zn contents (x), the optical band gaps and electron-hole coulomb energies are improved, while ground electron-hole wave function overlaps, electron-hole exchange energies, stokes shift and fine structure splitting are reduced. A composition-tunable emission from blue to yellow wavelength is obviously demonstrated. The optical band gaps, ground electron-hole wave function overlaps, electron-hole interactions, stokes shift and fine structure splitting are progressively decreased with the increasing diameters. Alloy Zn{sub x}Cd{sub 1−x}Se nanocrystal with Zn rich and large diameter is the best candidate to optimistically be used as a source of entangled photon pairs. The agreement with the experimental data is remarkable. Finally, the present systematic study on the structural properties and excitonic splitting predominantly opens a new perspective to understand the size- and composition-dependent properties of Zn{sub x}Cd{sub 1−x}Se nanocrystals with a comprehensive strategy to design the optoelectronic devices.

  2. Sample Set (SE): SE53 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE53 Covering chemical diversity of genetically-modified tomatoes using metabolomics...signature. We conclude that multi-platform metabolomics is an approach that is both sensitive and robust and

  3. Sample Set (SE): SE10 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE10 Effect of phosphorus nutrition for cabbage metabolites Investigation of Brassi...ca oleracea var. capitata Hatukoi leaf metabolites. 3 growth conditions (high, low and no phosphorus nutrition

  4. Sample Set (SE): SE31 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE31 Comparison of seed metabolites among eggplant fruit tissues Investigation of S...olanum melongena Senryounigou metabolites. 3 tissues (flesh, fruit, peel) data are examined. Takeshi Ara 1,

  5. Sample Set (SE): SE28 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE28 Comparison of leaf metabolites among developmental stages of Hevea brasiliensi...s Investigation of Hevea brasiliensis leaf metabolites. 4 developmental stages and 6 replicates data are exa

  6. Superconductivity in the ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n}

    Energy Technology Data Exchange (ETDEWEB)

    Grosse, Corinna; Chiatti, Olivio; Fischer, Saskia F. [Novel Materials Group, Humboldt-Universitaet Berlin (Germany); Alemayehu, Matti B.; Falmbigl, Matthias; Johnson, David C. [Department of Chemistry, University of Oregon, Eugene, OR (United States)

    2016-07-01

    The ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n} are artificially layered materials consisting of n NbSe{sub 2} single-layers stacked alternately with atomic double layers of PbSe. NbSe{sub 2} is a transition metal dichalcogenide with interesting electrical properties such as superconductivity and charge density waves. The influence of turbostratic disorder, a random rotation between the NbSe{sub 2} and PbSe layers, on the superconducting transition temperature has been unknown so far. We investigate the structural and temperature-dependent electrical properties of the ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n} by means of scanning transmission electron microscopy, X-ray diffraction, in-plane resistivity and Hall measurements and compare them to those of analogous non-disordered misfit layer compound (MLC) polymorphs. We observe a superconducting transition in the resistivity of the ferecrystals. The transition temperatures are reduced by up to 55 % with respect to the analogous MLC polymorphs. This indicates that turbostratic disorder substantially weakens the electron-phonon coupling in (PbSe){sub 1.14}(NbSe{sub 2}){sub n}. We discuss the results of the structural and electrical properties of the ferecrystals with respect to their MLC analogues and also with respect to ultra-thin NbSe{sub 2} layers.

  7. Electronic structure and intersubband magnetoabsorption spectra of CdSe/CdS core-shell nanowires

    Science.gov (United States)

    Xiong, Wen

    2016-10-01

    The electronic structures of CdSe/CdS core-shell nanowires are calculated based on the effective-mass theory, and it is found that the hole states in CdSe/CdS core-shell nanowires are strongly mixed, which are very different from the hole states in CdSe or CdS nanowires. In addition, we find the three highest hole states at the Γ point are almost localized in the CdSe core and the energies of the hole states in CdSe/CdS core-shell nanowires can be enhanced greatly when the core radius Rc increases and the total radius R is fixed. The degenerate hole states are split by the magnetic field, and the split energies will increase when |Jh | increases from 1/2 to 7/2, while they are almost not influenced by the change of the core radius Rc. The absorption spectra of CdSe/CdS core-shell nanowires at the Γ point are also studied in the magnetic field when the temperature T is considered, and we find there are only two peaks will arise if the core radius Rc and the temperature T increase. The intensity of each optical absorption can be considerably enhanced by increasing the core radius Rc when the temperature T is fixed, it is due to the increase of their optical transition matrix element. Meanwhile, the intensity of each optical absorption can be decreased when the temperature T increases and the core radius Rc is fixed, and this is because the Fermi-Dirac distribution function of the corresponding hole states will increase as the increase of the temperature T.

  8. Wines with Increased Lignan Content by the Addition of Lignan Extracts

    Czech Academy of Sciences Publication Activity Database

    Balík, J.; Híc, P.; Kulichová, J.; Novotná, P.; Tříska, Jan; Vrchotová, Naděžda; Strohalm, J.; Houška, M.

    2016-01-01

    Roč. 34, č. 5 (2016), s. 439-444 ISSN 1212-1800 R&D Projects: GA MZe QJ1210258 Institutional support: RVO:67179843 Keywords : enrichment of white and red wines * 7-hydroxymatairesinol * alpha-conidendrin * antioxidant activity * total polyphenol content * sensory evaluation Subject RIV: GM - Food Processing Impact factor: 0.787, year: 2016

  9. Synthesis and optical study of green light emitting polymer coated CdSe/ZnSe core/shell nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, S.K., E-mail: surya@pu.ac.in [Department of Physics, Center of Advanced Study in Physics, Panjab University, Chandigarh 160 014 (India); Sharma, Mamta [Department of Physics, Center of Advanced Study in Physics, Panjab University, Chandigarh 160 014 (India)

    2013-05-15

    Highlights: ► Synthesis of Polymer coated core CdSe and CdSe/ZnSe core/shell NCs. ► From TEM image, the spherical nature of CdSe and CdSe/ZnSe is obtained. ► Exhibiting green band photoemission peak at 541 nm and 549 nm for CdSe core and CdSe/ZnSe core/shell NCs. ► The shell thickness has been calculated by using superposition of quantum confinement energy model. - Abstract: CdSe/ZnSe Core/Shell NCs dispersed in PVA are synthesized by chemical method at room temperature. This is characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectra and photoluminescence spectroscopy (PL). TEM image shows the spherical nature of CdSe/ZnSe core/shell NCs. The red shift of absorption and emission peak of CdSe/ZnSe core/shell NCs as compared to CdSe core confirmed the formation of core/shell. The superposition of quantum confinement energy model is used for calculation of thickness of ZnSe shell.

  10. Sample Set (SE): SE20 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE20 Arabidopsis thaliana leaf metabolite analysis for a software test Investigatio...es that were investigated to optimize the parameters of PowerGet software for better metabolite annotation i

  11. Content of Chemical Elements in Wood-Destroying Fungi

    Directory of Open Access Journals (Sweden)

    Strapáč I.

    2016-12-01

    Full Text Available The aim of this study was to examine the content of chemical elements in the dried fruiting bodies of edible wood decaying fungi such as Honey mushrooms (Armillaria mellea, Shiitakes (Lentinus edodes and Oyster mushrooms (Pleurotus ostreatus. Powdered samples of fungi were mineralized in a microwave digestion. Twenty-one (21 chemical elements were detected in the plasma of the device ICP-MS AGILENT 7500c by accredited methods with the aid of calibration curves. The content of individual elements varied within a considerable range. The highest contents of K, Mn, Cu and Cd were found in the fruiting bodies of Honey mushrooms (Armillaria mellea. Shiitakes (Lentinus edodes had the highest content of B and Mo. Significant differences were found in the content of elements in the Oyster mushrooms (Pleurotus ostreatus from Slovakia, Hungary and China. The highest content of Al was found in the Oyster mushrooms (Pleurotus ostreatus from Hungary. The Chinese oysters had a maximum contents of Ca, Mg, Co, Pb, As and U. The Oyster mushrooms (Pleurotus ostreatus from Lemešany (Slovakia had the highest contents of Na, Zn, Fe, Se, Ag, Hg and Cr. The difference of chemical element content could be influenced by the genotype of the fungus and by the composition of substrate on which mushroom grow up.

  12. Co-downregulation of the hydroxycinnamoyl-CoA:shikimate hydroxycinnamoyl transferase and coumarate 3-hydroxylase significantly increases cellulose content in transgenic alfalfa (Medicago sativa L.).

    Science.gov (United States)

    Tong, Zongyong; Li, Heng; Zhang, Rongxue; Ma, Lei; Dong, Jiangli; Wang, Tao

    2015-10-01

    Lignin is a component of the cell wall that is essential for growth, development, structure and pathogen resistance in plants, but high lignin is an obstacle to the conversion of cellulose to ethanol for biofuel. Genetically modifying lignin and cellulose contents can be a good approach to overcoming that obstacle. Alfalfa (Medicago sativa L.) is rich in lignocellulose biomass and used as a model plant for the genetic modification of lignin in this study. Two key enzymes in the lignin biosynthesis pathway-hydroxycinnamoyl -CoA:shikimate hydroxycinnamoyl transferase (HCT) and coumarate 3-hydroxylase (C3H)-were co-downregulated. Compared to wild-type plants, the lignin content in the modified strain was reduced by 38%, cellulose was increased by 86.1%, enzyme saccharification efficiency was increased by 10.9%, and cell wall digestibility was increased by 13.0%. The modified alfalfa exhibited a dwarf phenotype, but normal above ground biomass. This approach provides a new strategy for reducing lignin and increasing cellulose contents and creates a new genetically modified crop with enhanced value for biofuel. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  13. Sample Set (SE): SE18 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available in by Orbitrap MS and automated search engine Lipid Search A comprehensive and precise identification of pho...SE18 Global identification of phospholipid molecular species in mouse liver and bra

  14. Synthesis of Monodisperse CdSe QDs using Controlled Growth Temperatures

    International Nuclear Information System (INIS)

    Noor Razinah Rahmat; Akrajas Ali Umar; Muhammad Yahya; Muhamad Mat Salleh; Mohammad Hafizuddin Jumali

    2011-01-01

    The effect of growth temperatures on size of CdSe quantum dots (QDs) has been investigated. CdSe QDs were synthesized using thermolysis of organometallics precursor route using wet chemical method. The growth temperature was varied from 260-310 degree Celsius with growth period fixed at 60 s. As the growth temperature increased, the monodispersed CdSe QDs with diameter in the range 3-7 nm were obtained. Both absorption and PL spectra of the QDs revealed a strong red-shift supporting the increment size of QDs with the rise of growth temperature. (author)

  15. Electrochemical synthesis of nanostructured Se-doped SnS: Effect of Se-dopant on surface characterizations

    International Nuclear Information System (INIS)

    Kafashan, Hosein; Azizieh, Mahdi; Balak, Zohre

    2017-01-01

    Highlights: • Nanostructured SnS_1_-_xSe_x thin films were prepared by using electrodeposition method. • The XRD patterns obviously showed that the synthesized films were polycrystalline. • The PL spectra of SnS_1_-_xSe_x thin films showed four emission peaks. • The UV–vis spectra shows a variation in the optical band gap energy of SnS_1_-_xSe_x thin films from 1.22 to 1.65 eV. • SnS_1_-_xSe_x thin films would be suitable for use as absorber layers. - Abstract: SnS_1_-_xSe_x nanostructures with different Se-dopant concentrations were deposited on fluorine doped tin oxide (FTO) substrate through cathodic electrodeposition technique. The pH, temperature, applied potential (E), and deposition time remained were 2.1, 60 °C, −1 V, and 30 min, respectively. SnS_1_-_xSe_x nanostructures were characterized using X-ray diffraction (XRD), field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), room temperature photoluminescence (PL), and UV–vis spectroscopy. The XRD patterns revealed that the SnS_1_-_xSe_x nanostructures were polycrystalline with orthorhombic structure. FESEM showed various kinds of morphologies in SnS_1_-_xSe_x nanostructures due to Se-doping. PL and UV–vis spectroscopy were used to evaluate the optical properties of SnS_1_-_xSe_x thin films. The PL spectra of SnS_1_-_xSe_x nanostructures displayed four emission peaks, those are a blue, a green, an orange, and a red emission. UV–vis spectra showed that the optical band gap energy (E_g) of SnS_1_-_xSe_x nanostructures varied between 1.22–1.65 eV, due to Se-doping.

  16. Sample Set (SE): SE14 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE14 Effect of agricultural films for tomato fruit metabolites Investigation of Sol...anum lycopersicum fruit metabolites. 3 growth conditions (covered with normal or UV cut agricultural film or no agricultura

  17. Clinical significance of measurement of changes serum SE-CAD, CEA and CA19-9 contents after operation in patients with gastric cancer

    International Nuclear Information System (INIS)

    Jin Wentao; Jin Zeqiu; Jiang Hui

    2007-01-01

    Objective: To explore the clinical significance of changes of serum SE-CAD, CEA and CA19-9 levels in patients with gastric cancer after operation. Methods: Serum levels of soluble E-Cadherin were measured with ELISA and serum CEA, CA19 -9 levels measared with RIA in 32 patients with gastric cancer both before and 6 months after operation as well as in 30 controls. Results: Serum SE-CAD, CEA and CA19-9 levels were significantly higher in the patients than those in the controls before operation (P 0.05). Conclusion: Changes of serum SE-CAD, CEA and CA19-9 levels after operation might be prognostic importance in patients with gastric cancer. (authors)

  18. Historical nitrogen content of bryophyte tissue as an indicator of increased nitrogen deposition in the Cape Metropolitan Area, South Africa

    International Nuclear Information System (INIS)

    Wilson, D.; Stock, W.D.; Hedderson, T.

    2009-01-01

    Information on changes in precipitation chemistry in the rapidly expanding Cape Metropolitan Area (CMA) of South Africa is scarce. To obtain a long-term record of N deposition we investigated changes in moss foliar N, C:N ratios and nitrogen isotope values that might reflect precipitation chemistry. Tissue from 9 species was obtained from herbarium specimens collected between 1875 and 2000 while field samples were collected in 2001/2002. There is a strong trend of increasing foliar N content in all mosses collected over the past century (1.32-1.69 %N). Differences exist between ectohydric mosses which have higher foliar N than the mixohydric group. C:N ratios declined while foliar δ 15 N values showed no distinct pattern. From relationships between moss tissue N and N deposition rates we estimated an increase of 6-13 kg N ha -1 a -1 since 1950. Enhanced N deposition rates of this magnitude could lead to biodiversity losses in native ecosystems. - This study of bryophyte tissue nutrient contents shows a historical increase in N deposition rates to the low nutrient adapted plant biodiversity hotspot in the Western Cape, South Africa

  19. Historical nitrogen content of bryophyte tissue as an indicator of increased nitrogen deposition in the Cape Metropolitan Area, South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, D. [Botany Department, University of Cape Town, Rondebosch 7701 (South Africa); Stock, W.D. [Botany Department, University of Cape Town, Rondebosch 7701 (South Africa); Centre for Ecosystem Management, School of Natural Sciences, Edith Cowan University, 100 Joondalup Drive, Joondalup, Perth, WA 6027 (Australia)], E-mail: w.stock@ecu.edu.au; Hedderson, T. [Botany Department, University of Cape Town, Rondebosch 7701 (South Africa)

    2009-03-15

    Information on changes in precipitation chemistry in the rapidly expanding Cape Metropolitan Area (CMA) of South Africa is scarce. To obtain a long-term record of N deposition we investigated changes in moss foliar N, C:N ratios and nitrogen isotope values that might reflect precipitation chemistry. Tissue from 9 species was obtained from herbarium specimens collected between 1875 and 2000 while field samples were collected in 2001/2002. There is a strong trend of increasing foliar N content in all mosses collected over the past century (1.32-1.69 %N). Differences exist between ectohydric mosses which have higher foliar N than the mixohydric group. C:N ratios declined while foliar {delta}{sup 15}N values showed no distinct pattern. From relationships between moss tissue N and N deposition rates we estimated an increase of 6-13 kg N ha{sup -1} a{sup -1} since 1950. Enhanced N deposition rates of this magnitude could lead to biodiversity losses in native ecosystems. - This study of bryophyte tissue nutrient contents shows a historical increase in N deposition rates to the low nutrient adapted plant biodiversity hotspot in the Western Cape, South Africa.

  20. Properties of the CuGaSe2 and CuInSe2 (001) surface

    International Nuclear Information System (INIS)

    Deniozou, T.

    2005-01-01

    The main task of this work was to investigate the (001) CuGaSe 2 and CuInSe 2 surface in dependence of preparation and stoichiometry. The knowledge of the atomic structure as well as other surface properties is important in respect to optimization of novel thin film solar cells. For the characterization of the layers mainly Auger electron Spectroscopy, low-energy electron diffraction and photoelectron spectroscopy were implemented. The development of an appropriate procedure with Ar + sputtering and annealing combined with decapping enabled the preparation of clean and well-ordered surfaces. Different surface structures were observed in dependence of the layer preparation and composition. A (4 x 1) reconstruction was observed for the first time on CuGaSe 2 layers grown with a moderate Cu-excess after preparation by sputtering and annealing. Similarly a (4 x 2) reconstruction was detected on CuInSe2 surfaces of Cu-poor layers. A reconstruction could be also observed on Cu-poorer layers, however the facets/steps could not be completely removed. Cu-richer layers were facet-free, however the observed reconstruction was also weaker. Thus it was shown that in contrary to recent expectations, according to which only the (112) surface is stable, also the (001) can be stable under particular conditions. The appearance of facets or steps is correlated with the presence of CuIn 3 Se 5 or CuGa 3 Se 5 phases. This information is furthermore important for the understanding of grain boundaries in polycrystalline CuGaSe 2 and CuInSe 2 . Binding energy shifts were observed for the first time on all Se3d, In4d, Ga3d, Cu3d core levels of the reconstructed surfaces. By comparison with results from the literature from the similar ZnSe (100) surface a modell for the (4 x 2) reconstruction was proposed. The surface components in the Se3d, In4d and Cu3d emission were attributed to Se dimers or In and Cu adatoms respectively. The x 1 periodicity of the (4 x 1) reconstruction of CuGaSe 2 is

  1. Sample Set (SE): SE16 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE16 Effect of agricultural films for spinach leaf metabolites 2 Investigation of S...pinacia oleracea leaf metabolites. 3 growth conditions (covered with normal or UV cut agricultural film or no agricultura

  2. Sample Set (SE): SE26 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE26 Effect of compost for cabbage metabolites Investigation of Brassica oleracea v...ar. capitata YR Seisyun leaf metabolites. 2 growth conditions (with or without 6t compost treatment) and 3 r

  3. Scintigraphic evaluation of enterogastric reflux using /sup 75/Se-HCAT: Methodology and first clinical observations

    Energy Technology Data Exchange (ETDEWEB)

    Furno, A; Sciarretta, G; Malaguti, P; Fagioli, G; Pozzato, R

    1987-08-01

    The aim of this study was to assess the possibility of detecting enterogastric reflux (EGR) by /sup 75/Se-HCAT cholescintigraphy. The lowest detectable activity in the gastric area at different concentrations of the radiotracer in the gallbladder was preliminary measured both in a plastic phantom and in an in vivo model. Ten patients were studied after a single oral administration of 1480 KBq /sup 75/Se-HCAT. Gamma camera imaging was carried out for five consecutive days during both fasting and after meal ingestion. In our in vivo model an EGR corresponding to 1% of gallbladder content on day one and 8% on day five was detected. In three out of five patients in whom bile was present in the stomach at endoscopy, /sup 75/Se-HCAT cholescintigraphy demonstrated an EGR, while in three out of five patients in whom endoscopy was negative, /sup 75/Se-HCAT cholescintigrahy detected EGR either during fasting or after meal ingestion. As EGR is not constant, Se-HCAT may be a useful tracer of bile to detect EGR over a prolonged period of time and in different physiological conditions.

  4. Overexpressing Exogenous 5-Enolpyruvylshikimate-3-Phosphate Synthase (EPSPS Genes Increases Fecundity and Auxin Content of Transgenic Arabidopsis Plants

    Directory of Open Access Journals (Sweden)

    Jia Fang

    2018-02-01

    Full Text Available Transgenic glyphosate-tolerant plants overproducing EPSPS (5-enolpyruvylshikimate-3-phosphate synthase may exhibit enhanced fitness in glyphosate-free environments. If so, introgression of transgenes overexpressing EPSPS into wild relative species may lead to increased competitiveness of crop-wild hybrids, resulting in unpredicted environmental impact. Assessing fitness effects of transgenes overexpressing EPSPS in a model plant species can help address this question, while elucidating how overproducing EPSPS affects the fitness-related traits of plants. We produced segregating T2 and T3Arabidopsis thaliana lineages with or without a transgene overexpressing EPSPS isolated from rice or Agrobacterium (CP4. For each of the three transgenes, we compared glyphosate tolerance, some fitness-related traits, and auxin (indole-3-acetic acid content in transgene-present, transgene-absent, empty vector (EV, and parental lineages in a common-garden experiment. We detected substantially increased glyphosate tolerance in T2 plants of transgene-present lineages that overproduced EPSPS. We also documented significant increases in fecundity, which was associated with increased auxin content in T3 transgene-present lineages containing rice EPSPS genes, compared with their segregating transgene-absent lineages, EV, and parental controls. Our results from Arabidopsis with nine transgenic events provide a strong support to the hypothesis that transgenic plants overproducing EPSPS can benefit from a fecundity advantage in glyphosate-free environments. Stimulated biosynthesis of auxin, an important plant growth hormone, by overproducing EPSPS may play a role in enhanced fecundity of the transgenic Arabidopsis plants. The obtained knowledge is useful for assessing environmental impact caused by introgression of transgenes overproducing EPSPS from any GE crop into populations of its wild relatives.

  5. Overexpressing Exogenous 5-Enolpyruvylshikimate-3-Phosphate Synthase (EPSPS) Genes Increases Fecundity and Auxin Content of Transgenic Arabidopsis Plants.

    Science.gov (United States)

    Fang, Jia; Nan, Peng; Gu, Zongying; Ge, Xiaochun; Feng, Yu-Qi; Lu, Bao-Rong

    2018-01-01

    Transgenic glyphosate-tolerant plants overproducing EPSPS (5-enolpyruvylshikimate-3-phosphate synthase) may exhibit enhanced fitness in glyphosate-free environments. If so, introgression of transgenes overexpressing EPSPS into wild relative species may lead to increased competitiveness of crop-wild hybrids, resulting in unpredicted environmental impact. Assessing fitness effects of transgenes overexpressing EPSPS in a model plant species can help address this question, while elucidating how overproducing EPSPS affects the fitness-related traits of plants. We produced segregating T 2 and T 3 Arabidopsis thaliana lineages with or without a transgene overexpressing EPSPS isolated from rice or Agrobacterium ( CP4 ). For each of the three transgenes, we compared glyphosate tolerance, some fitness-related traits, and auxin (indole-3-acetic acid) content in transgene-present, transgene-absent, empty vector (EV), and parental lineages in a common-garden experiment. We detected substantially increased glyphosate tolerance in T 2 plants of transgene-present lineages that overproduced EPSPS. We also documented significant increases in fecundity, which was associated with increased auxin content in T 3 transgene-present lineages containing rice EPSPS genes, compared with their segregating transgene-absent lineages, EV, and parental controls. Our results from Arabidopsis with nine transgenic events provide a strong support to the hypothesis that transgenic plants overproducing EPSPS can benefit from a fecundity advantage in glyphosate-free environments. Stimulated biosynthesis of auxin, an important plant growth hormone, by overproducing EPSPS may play a role in enhanced fecundity of the transgenic Arabidopsis plants. The obtained knowledge is useful for assessing environmental impact caused by introgression of transgenes overproducing EPSPS from any GE crop into populations of its wild relatives.

  6. Stable and metastable equilibria in PbSe + SnI2=SnSe + PbI2

    International Nuclear Information System (INIS)

    Odin, I.N.; Grin'ko, V.V.; Kozlovskij, V.F.; Demidova, E.D.

    2003-01-01

    T-x-y phase diagrams of the PbSe + SnI 2 =SnSe + PbI 2 mutual system (stable states) are plotted for the first time. It is shown that melt, solid solutions on the base of components of the mutual system and phase on the base of Sn 2 SeI 4 take part in phase equilibria. Transformations in the PbSe + SnI 2 =SnSe + PbI 2 mutual system leading to crystallization of metastable polytype modifications of lead iodides and metastable ternary compound forming in PbSe-PbI 2 system are investigated for the first time [ru

  7. Phase-separation control of KxFe2-ySe2 superconductor through rapid-quenching process

    International Nuclear Information System (INIS)

    Yanagisawa, Yusuke; Tanaka, Masashi; Yamashita, Aichi; Suzuki, Kouji; Hara, Hiroshi; Takeya, Hiroyuki; Takano, Yoshihiko; ElMassalami, Mohammed

    2017-01-01

    K x Fe 2-y Se 2 exhibits iron-vacancy ordering at T s ∼ 270°C and separates into two phases: a minor superconducting (iron-vacancy-disordered) phase and a major non-superconducting (iron-vacancy-ordered) phase. The microstructural and superconducting properties of this intermixture can be tuned by an appropriate control of the quenching process through T s . A faster quenching rate leads to a finer microstructure and a suppression of formation of the non-superconducting phase by up to 50%. Nevertheless, such a faster cooling rate induces a monotonic reduction in the superconducting transition temperature (from 30.7 to 26.0 K) and, simultaneously, a decrease in the iron content within the superconducting phase such that the compositional ratio changed from K 0.35 Fe 1.83 Se 2 to K 0.58 Fe 1.71 Se 2 . (author)

  8. Copper Selenidophosphates Cu4P2Se6, Cu4P3Se4, Cu4P4Se3, and CuP2Se, Featuring Zero-, One-, and Two-Dimensional Anions.

    Science.gov (United States)

    Kuhn, Alexander; Schoop, Leslie M; Eger, Roland; Moudrakovski, Igor; Schwarzmüller, Stefan; Duppel, Viola; Kremer, Reinhard K; Oeckler, Oliver; Lotsch, Bettina V

    2016-08-15

    Five new compounds in the Cu/P/Se phase diagram have been synthesized, and their crystal structures have been determined. The crystal structures of these compounds comprise four previously unreported zero-, one-, and two-dimensional selenidophosphate anions containing low-valent phosphorus. In addition to two new modifications of Cu4P2Se6 featuring the well-known hexaselenidohypodiphosphate(IV) ion, there are three copper selenidophosphates with low-valent P: Cu4P3Se4 contains two different new anions, (i) a monomeric (zero-dimensional) selenidophosphate anion [P2Se4](4-) and (ii) a one-dimensional selenidophosphate anion [Formula: see text], which is related to the well-known gray-Se-like [Formula: see text] Zintl anion. Cu4P4Se3 contains one-dimensional [Formula: see text] polyanions, whereas CuP2Se contains the 2D selenidophosphate [Formula: see text] polyanion. It consists of charge-neutral CuP2Se layers separated by a van der Waals gap which is very rare for a Zintl-type phase. Hence, besides black P, CuP2Se constitutes a new possible source of 2D oxidized phosphorus containing layers for intercalation or exfoliation experiments. Additionally, the electronic structures and some fundamental physical properties of the new compounds are reported. All compounds are semiconducting with indirect band gaps of the orders of around 1 eV. The phases reported here add to the structural diversity of chalcogenido phosphates. The structural variety of this family of compounds may translate into a variety of tunable physical properties.

  9. Effect of substrate temperature on the optical parameters of thermally evaporated Ge-Se-Te thin films

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Pankaj, E-mail: pks_phy@yahoo.co.i [Department of Physics, Jaypee University of Information Technology, Waknaghat, Solan, H.P. 173215 India (India); Katyal, S.C. [Department of Physics, Jaypee University of Information Technology, Waknaghat, Solan, H.P. 173215 India (India)

    2009-05-01

    Thin films of Ge{sub 10}Se{sub 90-x}Te{sub x} (x = 0, 10, 20, 30, 40, 50) glassy alloys were deposited at three substrate temperatures (303 K, 363 K and 423 K) using conventional thermal evaporation technique at base pressure of {approx} 10{sup -4} Pa. X-ray diffraction results show that films deposited at 303 K are of amorphous nature while films deposited at 363 K and 423 K are of polycrystalline nature. The optical parameters, refractive index and optical gap have been derived from the transmission spectra (using UV-Vis-NIR spectrophotometer) of the thin films in the spectral region 400-1500 nm. This has been observed that refractive index values remain almost constant while the optical gap is found to decrease considerably with the increase of substrate temperature. The decrease in optical gap is explained on the basis of change in nature of films, from amorphous to polycrystalline state, with the increase of substrate temperature. The optical gap has also been observed to decrease with the increase of Te content.

  10. Chemistry in CESM-SE: Evaluation, Performance and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Lamarque, Jean-Francois [National Center for Atmospheric Research, Boulder, CO (United States); Conley, Andrew [National Center for Atmospheric Research, Boulder, CO (United States); Vitt, Francis [National Center for Atmospheric Research, Boulder, CO (United States); Drake, John [Univ. of Tennessee, Knoxville, TN (United States); Sun, Jian [Univ. of Tennessee, Knoxville, TN (United States)

    2016-01-06

    The purpose of the proposed work focused on development of chemistry representation within the Spectral Element (SE) dynamical core as implemented in the Community Earth System Model (CESM). More specifically, a main focus was on the ability of SE to accurately represent tracer transport. The proposed approach was to incrementally increase the complexity of the problem, starting from specified two-dimensional flow and tracers to simulations using specified dynamics and full chemistry. As demonstrated below, we have successfully studied all aspects of the proposed work, although only part of the work has been published in the refereed literature so far. Furthermore, because the SE dynamical core has been found to have several deficiencies that are still being investigated for solution, not all proposed tasks were finalized. In addition to the tests for SE performance, in an effort to decrease the computational burden of interactive chemistry, especially in the case of a large number of chemical species and chemical reactions, development on a faster chemical solver and implementation on GPUs has been implemented in CESM under the leadership of John Drake (U. Tennessee).

  11. Exciton dephasing and biexciton binding in CdSe/ZnSe islands

    DEFF Research Database (Denmark)

    Wagner, Hans Peter; Tranitz, H.-P.; Preis, H

    1999-01-01

    The dephasing of excitons and the formation of biexcitons in self-organized CdSe/ZnSe islands grown by molecular-beam epitaxy is investigated using spectrally resolved four-wave mixing. A distribution of exciton-exciton scattering efficiencies and dephasing times in the range of 0.5-10 ps...

  12. Simultaneous tracing of 76Se-selenite and 77Se-selenomethionine by absolute labeling and speciation

    International Nuclear Information System (INIS)

    Suzuki, Kazuo T.; Somekawa, Layla; Kurasaki, Kazuki; Suzuki, Noriyuki

    2006-01-01

    Nutritional selenocompounds are transformed into the assumed common intermediate selenide, which is utilized for the synthesis of selenoenzymes or transformed into methylated metabolites for excretion. Hence, selenocompound metabolites can be traced only with labeled selenium. Here we applied a new tracer method for the metallomics of biometals using simultaneous speciation of each metallome labeled with different homo-elemental isotopes to metabolism and availability of selenium. Rats were depleted of endogenous natural abundance selenium by feeding a single selenium stable isotope ( 82 Se-selenite) and then administered 76 Se-selenite and 77 Se-selenomethionine ( 77 Se-SeMet)simultaneously. Biological samples were subjected to quantification and speciation analysis by HPLC-ICPMS. Metabolites of the labeled 76 Se and 77 Se and interaction with endogenous selenium were traced and examined without interference from the corresponding endogenous natural abundance isotopes. Differences in the distribution and metabolism among organs and between the two nutritional selenocompounds were compared under exactly identical biological and analytical conditions: (1) selenite was distributed more efficiently than SeMet in organs and body fluids except the pancreas. (2) SeMet was taken up by organs in its intact form. (3) Selenium of SeMet origin was distributed selectively in the pancreas and mostly bound to a protein together with intact SeMet. (4) Selenosugars A and B but not trimethylselenonium (TMSe) were detected in the liver. (5) Selenosugar B and TMSe were detected in the kidneys

  13. Simple synthesis of ZnSe nanoparticles by thermal treatment and their characterization

    Directory of Open Access Journals (Sweden)

    Aeshah Salem

    Full Text Available A simple thermal treatment was used to synthesize ZnSe nanoparticles at different calcination temperatures in a nitrogen flowing. The samples of ZnSe nanoparticles were prepared by reacting zinc nitrate (source of zinc and selenium powder with Polyvinylpyrrolidone (capping agent. Analysis of their X-ray diffraction patterns suggested the formation of an amorphous phase of the unheated material before calcination, which then transformed into a cubic crystalline structure of ZnSe nanoparticles after calcination. The phase analyses using energy-dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy confirmed the presence of Zn and Se as the original compounds of prepared ZnSe nanoparticle samples. The average particle size of the samples increased from 7 ± 5 to 18 ± 3 nm as the calcination temperature was increased from 450 to 700 °C, which is also supported by the transmission electron microscopy results. Diffuse UV–visible reflectance spectra were used to determine the optical band gap through the Kubelka–Munk equation; the energy band gap was found to decrease from 4.24 to 3.95 eV with increasing calcination temperature. Keywords: Metals, Calcination, Differential thermal analysis (DTA, Fourier transform infrared spectroscopy (FTIR

  14. Electrochemical synthesis of nanostructured Se-doped SnS: Effect of Se-dopant on surface characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Kafashan, Hosein, E-mail: hosein840521@gmail.com; Azizieh, Mahdi; Balak, Zohre

    2017-07-15

    Highlights: • Nanostructured SnS{sub 1-x}Se{sub x} thin films were prepared by using electrodeposition method. • The XRD patterns obviously showed that the synthesized films were polycrystalline. • The PL spectra of SnS{sub 1-x}Se{sub x} thin films showed four emission peaks. • The UV–vis spectra shows a variation in the optical band gap energy of SnS{sub 1-x}Se{sub x} thin films from 1.22 to 1.65 eV. • SnS{sub 1-x}Se{sub x} thin films would be suitable for use as absorber layers. - Abstract: SnS{sub 1-x}Se{sub x} nanostructures with different Se-dopant concentrations were deposited on fluorine doped tin oxide (FTO) substrate through cathodic electrodeposition technique. The pH, temperature, applied potential (E), and deposition time remained were 2.1, 60 °C, −1 V, and 30 min, respectively. SnS{sub 1-x}Se{sub x} nanostructures were characterized using X-ray diffraction (XRD), field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), room temperature photoluminescence (PL), and UV–vis spectroscopy. The XRD patterns revealed that the SnS{sub 1-x}Se{sub x} nanostructures were polycrystalline with orthorhombic structure. FESEM showed various kinds of morphologies in SnS{sub 1-x}Se{sub x} nanostructures due to Se-doping. PL and UV–vis spectroscopy were used to evaluate the optical properties of SnS{sub 1-x}Se{sub x} thin films. The PL spectra of SnS{sub 1-x}Se{sub x} nanostructures displayed four emission peaks, those are a blue, a green, an orange, and a red emission. UV–vis spectra showed that the optical band gap energy (E{sub g}) of SnS{sub 1-x}Se{sub x} nanostructures varied between 1.22–1.65 eV, due to Se-doping.

  15. Expression of phytoene synthase1 and carotene desaturase crtI genes result in an increase in the total carotenoids content in transgenic elite wheat (Triticum aestivum L.).

    Science.gov (United States)

    Cong, Ling; Wang, Cheng; Chen, Ling; Liu, Huijuan; Yang, Guangxiao; He, Guangyuan

    2009-09-23

    Dietary micronutrient deficiencies, such as the lack of vitamin A, are a major source of morbidity and mortality worldwide. Carotenoids in food can function as provitamin A in humans, while grains of Chinese elite wheat cultivars generally have low carotenoid contents. To increase the carotenoid contents in common wheat endosperm, transgenic wheat has been generated by expressing the maize y1 gene encoding phytoene synthase driven by a endosperm-specific 1Dx5 promoter in the elite wheat (Triticum aestivum L.) variety EM12, together with the bacterial phytoene desaturase crtI gene from Erwinia uredovora under the constitutive CaMV 35S promoter control. A clear increase of the carotenoid content was detected in the endosperms of transgenic wheat that visually showed a light yellow color. The total carotenoids content was increased up to 10.8-fold as compared with the nontransgenic EM12 cultivar. To test whether the variability of total carotenoid content in different transgenic lines was due to differences in the transgene copy number or expression pattern, Southern hybridization and semiquantitative reverse transcriptase polymerase chain reaction analyses were curried out. The results showed that transgene copy numbers and transcript levels did not associate well with carotenoid contents. The expression patterns of endogenous carotenoid genes, such as the phytoene synthases and carotene desaturases, were also investigated in wild-type and transgenic wheat lines. No significant changes in expression levels of these genes were detected in the transgenic endosperms, indicating that the increase in carotenoid transgenic wheat endosperms resulted from the expression of transgenes.

  16. High insoluble fibre content increases in vitro starch digestibility in partially baked breads.

    Science.gov (United States)

    Ronda, Felicidad; Rivero, Pablo; Caballero, Pedro A; Quilez, Joan

    2012-12-01

    Wheat breads prepared from frozen partially baked breads were characterized by their content of rapidly digestible starch (RDS) and slowly digestible starch (SDS) by the in vitro starch digestibility method developed by Englyst. Breads with different contents and types of fibre and breads prepared with different fermentation processes were studied. Bread with inulin and with a double fermentation had the lowest RDS content of 58.8 ± 1.7 and 60.0 ± 1.9 (% dry matter), respectively. Wheat bran bread, seeded bread, triple fermentation white bread and baguette-type bread showed values of RDS between 63.1 ± 1.7 and 65.7 ± 1.7 with no significant differences between them (p breads than in breads with added fibre. The highest values of the starch digestive rate index (SDRI) were obtained by the three types of breads with added fibre, which ranged from 91.8 ± 3.5 to 95.8 ± 3.5 versus 80.2 ± 3.5 to 87.5 ± 3.5 for white wheat breads. A significant (p bread crumbs corroborated this statement.

  17. Increases in soil water content after the mortality of non-native trees in oceanic island forest ecosystems are due to reduced water loss during dry periods.

    Science.gov (United States)

    Hata, Kenji; Kawakami, Kazuto; Kachi, Naoki

    2016-03-01

    The control of dominant, non-native trees can alter the water balance of soils in forest ecosystems via hydrological processes, which results in changes in soil water environments. To test this idea, we evaluated the effects of the mortality of an invasive tree, Casuarina equisetifolia Forst., on the water content of surface soils on the Ogasawara Islands, subtropical islands in the northwestern Pacific Ocean, using a manipulative herbicide experiment. Temporal changes in volumetric water content of surface soils at 6 cm depth at sites where all trees of C. equisetifolia were killed by herbicide were compared with those of adjacent control sites before and after their mortality with consideration of the amount of precipitation. In addition, the rate of decrease in the soil water content during dry periods and the rate of increase in the soil water content during rainfall periods were compared between herbicide and control sites. Soil water content at sites treated with herbicide was significantly higher after treatment than soil water content at control sites during the same period. Differences between initial and minimum values of soil water content at the herbicide sites during the drying events were significantly lower than the corresponding differences in the control quadrats. During rainfall periods, both initial and maximum values of soil water contents in the herbicided quadrats were higher, and differences between the maximum and initial values did not differ between the herbicided and control quadrats. Our results indicated that the mortality of non-native trees from forest ecosystems increased water content of surface soils, due primarily to a slower rate of decrease in soil water content during dry periods. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. A transferable force field for CdS-CdSe-PbS-PbSe solid systems

    Science.gov (United States)

    Fan, Zhaochuan; Koster, Rik S.; Wang, Shuaiwei; Fang, Changming; Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W.; van Huis, Marijn A.; Vlugt, Thijs J. H.

    2014-12-01

    A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., "Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth," Nano Lett. 14, 3661-3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

  19. A transferable force field for CdS-CdSe-PbS-PbSe solid systems

    Energy Technology Data Exchange (ETDEWEB)

    Fan, Zhaochuan; Vlugt, Thijs J. H., E-mail: t.j.h.vlugt@tudelft.nl [Process and Energy Department, Delft University of Technology, Leeghwaterstraat 39, 2628 CB Delft,The Netherlands (Netherlands); Koster, Rik S.; Fang, Changming; Huis, Marijn A. van [Debye Institute for Nanomaterials Science and Center for Extreme Matter and Emergent Phenomena, Utrecht University, Princetonplein 5, 3584 CC Utrecht (Netherlands); Wang, Shuaiwei [Institute of Nanostructured Functional Materials, Huanghe Science and Technology College, Zhengzhou, Henan 450006 (China); Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W. [Kavli Institute of Nanoscience, Delft University of Technology, Lorentzweg 1, 2628 CJ Delft (Netherlands)

    2014-12-28

    A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., “Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth,” Nano Lett. 14, 3661–3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

  20. The processing of CdSe/Polymer nanocomposites via solution organometallic chemistry

    International Nuclear Information System (INIS)

    Khanna, P.K.; Singh, Narendra; Charan, Shobhit; Lonkar, Sunil P.; Reddy, A. Satyanarayana; Patil, Yogesh; Viswanath, A. Kasi

    2006-01-01

    This paper presents in situ preparation of CdSe nanoparticles using poly(vinyl alcohol) [PVA] and polymethylmethacrylate [PMMA] as matrices by use of organoselenium compound. Reaction of cadmium metal salt and 1,2,3-selenadiazole (the source of selenium) enabled formation of CdSe nanoparticles. Use of selenadiazole in the present work with polymer is first of its kind. The radical polymerization of methycrylate monomer with benzoyl peroxide followed by reaction of respective reagents have been successfully employed to synthesize CdSe/PMMA nanocomposite. Similarly, reaction between selenadiazole and cadmium metal salt in aq. PVA yielded polymer coated or mixed CdSe nanoparticles. The UV-vis absorption spectra showed blue shift of about 200 nm with respect to band-gap energy of bulk CdSe, due to size quantization effect in CdSe particles. An emission band was observed at 530 nm in photoluminescence spectrum (PL) of CdSe/PMMA. IR spectra indicated shifts in the values of the polymer functional group due to nanoparticles. X-ray measurement of CdSe/Polymer nano-composites showed broad pattern for cubic CdSe and particle size of CdSe was estimated to be <10 nm. TGA revealed gradual weight loss between 200 and 400 deg. C indicating increased thermal stability of the polymer

  1. Determination of K shell fluorescence cross-section and Kβ/Kα intensity ratios for Fe, Se, Te, FeSe, FeTe and TeSe

    International Nuclear Information System (INIS)

    Saydam, M.; Aksoy, C.; Cengiz, E.; Alaşalvar, C.; Tıraşoğlu, E.; Apaydın, G.

    2012-01-01

    The fluorescence cross-sections (σ Ki ) and the intensity ratios K β /K α for pure Fe, Se, Te elements and FeSe, FeTe, TeSe complexes have been investigated. The samples were excited by 59.5 keV γ-rays from 241 Am annular radioactive source and emitted X-rays. They were counted by an Ultra-LEGe detector with resolution of 150 eV at 5.9 keV. For pure elements results have been compared with the theoretical calculated values. According to our results band length and mutual interaction of atoms affected the results. We claimed that these effects would help researchers who study on superconductors, especially determining which compound can be show the superconductor properties. - Highlights: ► TeSe, FeSe and FeTe complexes have affected each other in terms of charge transfer. ► Fe excitement and enhancement have been made by Se and Te. ► Attractive interactions between electrons can help to becoming superconductivity.

  2. High temperature XRD of Cu2GeSe3

    International Nuclear Information System (INIS)

    Premkumar, D. S.; Malar, P.; Chetty, Raju; Mallik, Ramesh Chandra

    2015-01-01

    The Cu 2 GeSe 3 is prepared by solid state synthesis method. The high temperature XRD has been done at different temperature from 30 °C to 450 °C. The reitveld refinement confirms Cu 2 GeSe 3 phase and orthorhombic crystal structure. The lattice constants are increasing with increase in the temperature and their rate of increase with respect to temperature are used for finding the thermal expansion coefficient. The calculation of the linear and volume coefficient of thermal expansion is done from 30 °C to 400 °C. Decrease in the values of linear expansion coefficients with temperature are observed along a and c axis. Since thermal expansion coefficient is the consequence of the distortion of atoms in the lattice; this can be further used to find the minimum lattice thermal conductivity at given temperature

  3. L-Cysteine Capped CdSe Quantum Dots Synthesized by Photochemical Route.

    Science.gov (United States)

    Singh, Avinash; Kunwar, Amit; Rath, M C

    2018-05-01

    L-cysteine capped CdSe quantum dots were synthesized via photochemical route in aqueous solution under UV photo-irradiation. The as grown CdSe quantum dots exhibit broad fluorescence at room temperature. The CdSe quantum dots were found to be formed only through the reactions of the precursors, i.e., Cd(NH3)2+4 and SeSO2-3 with the photochemically generated 1-hydroxy-2-propyl radicals, (CH3)2COH radicals, which are formed through the process of H atom abstraction by the photoexcited acetone from 2-propanol. L-Cysteine was found to act as a suitable capping agent for the CdSe quantum dots and increases their biocompatability. Cytotoxicty effects of these quantum dots were evaluated in Chinese Hamster Ovary (CHO) epithelial cells, indicated a significant lower level for the L-cysteine capped CdSe quantum dots as compare to the bare ones.

  4. Highly luminescent CdSe/ZnSe core-shell quantum dots of one-pot preparation in octadecene

    NARCIS (Netherlands)

    Zeng, Q.; Kong, X.; Zhang, Y.; Zhang, H.

    2008-01-01

    CdSe/ZnSe core-shell quantum dots were synthesized using a new one-pot procedure where the core was prepared in octadecene. A ZnSe shell around a CdSe nanoparticle was formed by the reaction of selenium-richness on the surfaces of CdSe nanoparticles with Zn2+ from the injected zinc stearate

  5. Bulk Fermi surface and electronic properties of Cu0.07Bi2Se3

    Science.gov (United States)

    Martin, C.; Craciun, V.; Miller, K. H.; Uzakbaiuly, B.; Buvaev, S.; Berger, H.; Hebard, A. F.; Tanner, D. B.

    2013-05-01

    The electronic properties of Cu0.07Bi2Se3 have been investigated using Shubnikov-de Haas and optical reflectance measurements. Quantum oscillations reveal a bulk, three-dimensional Fermi surface with anisotropy kFc/kFab≈ 2 and a modest increase in free-carrier concentration and in scattering rate with respect to the undoped Bi2Se3, also confirmed by reflectivity data. The effective mass is almost identical to that of Bi2Se3. Optical conductivity reveals a strong enhancement of the bound impurity bands with Cu addition, suggesting that a significant number of Cu atoms enter the interstitial sites between Bi and Se layers or may even substitute for Bi. This conclusion is also supported by x-ray diffraction measurements, where a significant increase of microstrain was found in Cu0.07Bi2Se3, compared to Bi2Se3.

  6. Composition and strain effects in Type I and Type II heterostructure ZnSe/Cd(Zn)S and ZnSe/Cd1-xZnxS core/shell quantum dots

    Science.gov (United States)

    Gheshlaghi, Negar; Pisheh, Hadi Sedaghat; Ünlü, Hilmi

    2017-11-01

    We investigated the effect of ternary shell alloy composition on the bandgap and diameter of core of ZnSe / Cd1 - x Znx S heterostructure core/shell quantum dots, which were synthesized by using a simple colloidal technique. Characterization by using the x-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Vis absorption and fluorescence emission spectroscopic techniques indicate that (i) there is a transition of ZnSe / Cd0.6 Zn0.4 S Type-I heterostructure (electrons and holes tend to localize in core) to ZnSe / Cd0.75 Zn0.25 S quasi-Type-II heterostructures (holes tend to localized in the core and electrons are delocalized) and (ii) then after large red shift and Stock-shift in PL emission spectra but not a distinct absorption peak in UV spectra become noticeable in ZnSe/Cd0.75Zn0.25 S quasi-Type II and ZnSe/CdS Type II heterostructures (electrons are localized in core and holes are localized in shell). Furthermore, the increase of Cd:S ratio in shell alloy composition shifts the XRD peaks to lower 2θ degrees which corresponds to tensile strain in the ZnSe core. Finally, the hydrostatic interfacial strain has effect on the squeezing or stretching the capped core: A decrease of compressive force on core from ZnSe/ZnS to tensile force in ZnSe/CdS with increase in Cd:S ratio indicates that transition of compressive strain to tensile strain takes place with the transition from Type-I to II heterostructure.

  7. Photoluminescence of ZnBeMnSe solid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Strzałkowski, K., E-mail: skaroll@fizyka.umk.pl; Firszt, F.; Marasek, A.

    2017-04-15

    In this paper optical properties of Zn{sub 1-x-y}Be{sub x}Mn{sub y}Se mixed semiconductors were studied as a function of both, temperature and excitation power. The crystals under investigation were grown by the high-pressure, high-temperature vertical Bridgman technique within the range of the composition 0.05≤x, y≤0.2. Photoluminescence spectra for the lowest content of Mn and Be exhibit character typical for II-VI semiconductors together with intensive yellow-orange manganese emission. Evolution of the excitonic emission as the function of temperature allowed determining the energy gap of the investigated semiconductors. Absorbance and photoluminescence excitation spectra confirmed crystal field splitting of excited atomic terms of manganese ions into the states, denoted according to the crystal field theory in the case of tetrahedral symmetry. Temperature and laser power dependences of luminescence showed anomalous behavior of the manganese emission. It turned out that the position of the Mn{sup 2+} related luminescence band does not change monotonically with the variation of the temperature or the excitation power. Finally, switching of the manganese emission has been observed. By increasing laser power of exciting radiation, the Mn-related emission could be quenched by almost two orders in magnitude. This effect was especially strong at low temperature and it was fully reversible.

  8. Content Marketing Practices in Finland

    OpenAIRE

    Suuronen, Toni

    2016-01-01

    The purpose of this study is to draw attention to increasingly important business phenomenon of content marketing. This paper defines content marketing, identifies its key elements and phases, and explores content marketing practices. The theorethical part is based on Pam Didner's 4P model that describes the stages of content marketing cycle: plan, produce, promote and perfect. The empirical part of the study is based on semi-structured interviews of seasoned content marketing professionals t...

  9. Selenite resistant rhizobacteria stimulate SeO(3) (2-) phytoextraction by Brassica juncea in bioaugmented water-filtering artificial beds.

    Science.gov (United States)

    Lampis, Silvia; Ferrari, Anita; Cunha-Queda, A Cristina F; Alvarenga, Paula; Di Gregorio, Simona; Vallini, Giovanni

    2009-09-01

    Selenium is a trace metalloid of global environmental concern. The boundary among its essentiality, deficiency, and toxicity is narrow and mainly depends on the chemical forms and concentrations in which this element occurs. Different plant species-including Brassica juncea-have been shown to play a significant role in Se removal from soil as well as water bodies. Furthermore, the interactions between such plants, showing natural capabilities of metal uptake and their rhizospheric microbial communities, might be exploited to increase both Se scavenging and vegetable biomass production in order to improve the whole phytoextraction efficiency. The aim of the present study was to evaluate the capability of selenite removal of B. juncea grown in hydroponic conditions on artificially spiked effluents. To optimize phytoextraction efficiency, interactions between B. juncea and rhizobacteria were designedly elicited. Firstly, B. juncea was grown on water-filtering agriperlite beds in the presence of three different selenite concentrations, namely, 0.2, 1.0, and 2.0 mM. Plant growth was measured after 3 and 6 weeks of incubation in order to establish the selenite concentration at which the best plant biomass production could be obtained. Afterwards, water-filtering agriperlite beds were inoculated either with a selenium-acclimated microbial community deriving from the rhizosphere of B. juncea grown, erstwhile, in a selenite-amended soil or with axenic cultures of two bacterial strains, vicelike Bacillus mycoides SeITE01 and Stenotrophomonas maltophilia SeITE02, previously isolated and described for their high resistance to selenite. These latter were seeded separately or as a dual consortium. Selenite was amended at a final concentration of 1.0 mM. Total Se content in plant tissues (both shoots and roots), plant biomass production, and persistence of bioaugmented microbial inocula during the experimental time were monitored. Moreover, parameters such as bioconcentration

  10. Study of the 76788082Se(d,p)77798183Se reactions using polarized deuterons

    International Nuclear Information System (INIS)

    Montestruque, L.A.

    1978-01-01

    Differential cross sections and vector analyzing powers were measured at an incident deuteron energy of 12.5 MeV for the 76 78 80 82 Se(d,p) 77 79 81 83 Se reactions. The data are compared with the predictions of the DWBA theory to determine the l-value, spin, parity and spectroscopic factor of the resolved states. High resolution measurements were made with a 100 cm broad-range magnetic spectrograph to determine the excitation energies of the states studied, and the possible existence of contaminants in the targets. Definitive spin and parity assignments are made to 16 states in 77 Se, 22 states in 79 Se, 17 states in 81 Se, and 18 states in 83 Se, fifteen of which were previously assigned. In addition, tentative spin assignments were made to one state in 83 Se. The spectrograph measurements allowed the determination of the excitation energies of anumber of additional states in each isotope. Among the 76 states studied in this work, ther are 8 2P/sub 3/2/ states, 4 1F/sub 5/2/ states 6 2P/sub 1/2/ states 4 1G/sub 9/2/ states, 31 2D/sub 5/2/ states, 10 3S/sub 1/2/ states, and 13 2D/sub 3/2 states. A sum-rule analysis was made and the results compared to previous work and to the predictions of the simple pairing theory

  11. Preparation of high-purity Pr(3+) doped Ge–Ga–Sb–Se glasses with intensive middle infrared luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Karaksina, E.V.; Shiryaev, V.S., E-mail: shiryaev@ihps.nnov.ru; Kotereva, T.V.; Churbanov, M.F.

    2016-02-15

    Glass materials with high emission characteristics and low content of limiting impurities are required for creation of devices for middle infrared (mid-IR) fiber optics. The paper presents the results of preparation of high-purity Pr{sup 3+}-doped Ga{sub x}Ge{sub y}Sb{sub z}Se{sub 1−(x+y+z)} (x=3÷4, y=20÷26, z=5÷11) glasses. The multi-stage technique for synthesis of these glasses is developed. It is based on chemical distillation purification of glass components and the transport reaction for purification of gallium. Transmitting, as well as thermal and luminescent properties of glasses are investigated. The content of limiting impurities of oxygen, carbon and hydrogen in the glass samples was ≤0.2 ppm wt. The 1300–3000 ppm wt Pr{sup 3+}-doped Ga–Ge–Sb–Se bulk glasses exhibit an intensive photoluminescence in the spectral range of 3.5–5.5 μm.

  12. Increased aerosol content in the atmosphere over Ukraine during summer 2010

    Science.gov (United States)

    Galytska, Evgenia; Danylevsky, Vassyl; Hommel, René; Burrows, John P.

    2018-04-01

    In this paper we assessed the influence of biomass burning during forest fires throughout summer (1 June-31 August) 2010 on aerosol abundance, dynamics, and its properties over Ukraine. We also considered influences and effects over neighboring countries: European Russia, Estonia, Belarus, Poland, Moldova, and Romania. We used MODIS satellite instrument data to study fire distribution. We also used ground-based remote measurements from the international sun photometer network AERONET plus MODIS and CALIOP satellite instrument data to determine the aerosol content and optical properties in the atmosphere over Eastern Europe. We applied the HYSPLIT model to investigate atmospheric dynamics and model pathways of particle transport. As with previous studies, we found that the highest aerosol content was observed over Moscow in the first half of August 2010 due to the proximity of the most active fires. Large temporal variability of the aerosol content with pronounced pollution peaks during 7-17 August was observed at the Ukrainian (Kyiv and Sevastopol), Belarusian (Minsk), Estonian (Toravere), and Romanian (Bucharest) AERONET sites. We analyzed aerosol spatiotemporal distribution over Ukraine using MODIS AOD 550 nm and further compared with the Kyiv AERONET site sun photometer measurements; we also compared CALIOP AOD 532 nm with MODIS AOD data. We analyzed vertical distribution of aerosol extinction at 532 nm, retrieved from CALIOP measurements, for the territory of Ukraine at locations where high AOD values were observed during intense fires. We estimated the influence of fires on the spectral single scattering albedo, size distribution, and complex refractive indices using Kyiv AERONET measurements performed during summer 2010. In this study we showed that the maximum AOD in the atmosphere over Ukraine recorded in summer 2010 was caused by particle transport from the forest fires in Russia. Those fires caused the highest AOD 500 nm over the Kyiv site, which in

  13. Exciton dephasing in ZnSe quantum wires

    DEFF Research Database (Denmark)

    Wagner, Hans Peter; Langbein, Wolfgang Werner; Hvam, Jørn Märcher

    1998-01-01

    The homogeneous linewidths of excitons in wet-etched ZnSe quantum wires of lateral sizes down to 23 nm are studied by transient four-wave mixing. The low-density dephasing time is found to increase with decreasing wire width. This is attributed mainly to a reduction of electron-exciton scattering...

  14. Decreased Polyunsaturated Fatty Acid Content Contributes to Increased Survival in Human Colon Cancer

    Directory of Open Access Journals (Sweden)

    Manuela Oraldi

    2009-01-01

    Full Text Available Among diet components, some fatty acids are known to affect several stages of colon carcinogenesis, whereas others are probably helpful in preventing tumors. In light of this, our aim was to determine the composition of fatty acids and the possible correlation with apoptosis in human colon carcinoma specimens at different Duke's stages and to evaluate the effect of enriching human colon cancer cell line with the possible reduced fatty acid(s. Specimens of carcinoma were compared with the corresponding non-neoplastic mucosa: a significant decrease of arachidonic acid, PPARα, Bad, and Bax and a significant increase of COX-2, Bcl-2, and pBad were found. The importance of arachidonic acid in apoptosis was demonstrated by enriching a Caco-2 cell line with this fatty acid. It induced apoptosis in a dose- and time-dependent manner via induction of PPARα that, in turn, decreased COX-2. In conclusion, the reduced content of arachidonic acid is likely related to carcinogenic process decreasing the susceptibility of cancer cells to apoptosis.

  15. Light controlled spin properties and radiative coupling of CdSe based quantum dots

    International Nuclear Information System (INIS)

    Schmidt, T.; Worschech, L.; Scheibner, M.; Forchel, A.; Slobodskyy, T.; Schmidt, G.; Molenkamp, L.W.; Passow, T.; Hommel, D.

    2007-01-01

    The authors have studied the photoluminescence of large and small ensembles of CdSe based quantum dots (QDs) in magnetic fields for different polarizations and powers of the exciting laser light. By means of polarization spectroscopy the g factors and spin lifetimes were determined for semimagnetic CdMnSe QDs with nominal Mn contents of 0%, 1% and 2%. Also the corresponding exciton lifetimes were analyzed. A sign reversal of the QD exciton g factor was identified comparing the polarization of QD luminescence with 0% and 2% Mn. For small excitation powers QDs with 1% Mn have a vanishing small value of g. Interestingly, by ramping up the excitation power of the exciting laser the exciton g factor increases by up to a factor of 30. Different heating mechanism were identified by characteristic power dependencies. For low excitation powers indirect heating of the spin systems occurs whereas above a critical power direct heating due to photoexcited carriers dominates. It is also demonstrated that in CdMnSe QDs the circular polarization of the luminescence can be inverted solely controlled by the laser power. Applying mesa techniques, collective radiance of QDs is demonstrated. For that purpose the radiative lifetimes of QDs with such a density that there are many dots within an area proportional to the square of the optical wavelength were studied for different numbers of QDs removed from that area. A comparison of photoluminescence decay times obtained for non-resonant and quasi-resonant excitation conditions and different mesa sizes is given. Radiative coupling of QDs takes place at least on the order of 150 nm. This length is comparable to the dimensions of lithographically well definable nanostructures and may therefore provide a mechanism to couple discrete quantum objects on a large scale. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  16. Etch Pit Studies of II-VI-Wide Bandgap Semiconductor Materials ZnSe, ZnCdSe, and ZnCdMgSe Grown on InP

    National Research Council Canada - National Science Library

    Semendy, Fred

    1999-01-01

    Etch pit density (EPD) determination studies have been conducted on II-VI semiconductor materials ZnSe, ZnCdSe, and ZnCdMgSe grown on InP surfaces for the first time by using various etching solutions under different...

  17. Shape Memory Polymers Containing Higher Acrylate Content Display Increased Endothelial Cell Attachment

    Science.gov (United States)

    Govindarajan, Tina; Shandas, Robin

    2018-01-01

    Shape Memory Polymers (SMPs) are smart materials that can recall their shape upon the application of a stimulus, which makes them appealing materials for a variety of applications, especially in biomedical devices. Most prior SMP research has focused on tuning bulk properties; studying surface effects of SMPs may extend the use of these materials to blood-contacting applications, such as cardiovascular stents, where surfaces that support rapid endothelialization have been correlated to stent success. Here, we evaluate endothelial attachment onto the surfaces of a family of SMPs previously developed in our group that have shown promise for biomedical devices. Nine SMP formulations containing varying amounts of tert-Butyl acrylate (tBA) and Poly(ethylene glycol) dimethacrylate (PEGDMA) were analyzed for endothelial cell attachment. Dynamic mechanical analysis (DMA), contact angle studies, and atomic force microscopy (AFM) were used to verify bulk and surface properties of the SMPs. Human umbilical vein endothelial cell (HUVEC) attachment and viability was verified using fluorescent methods. Endothelial cells preferentially attached to SMPs with higher tBA content, which have rougher, more hydrophobic surfaces. HUVECs also displayed an increased metabolic activity on these high tBA SMPs over the course of the study. This class of SMPs may be promising candidates for next generation blood-contacting devices. PMID:29707382

  18. Shape Memory Polymers Containing Higher Acrylate Content Display Increased Endothelial Cell Attachment

    Directory of Open Access Journals (Sweden)

    Tina Govindarajan

    2017-11-01

    Full Text Available Shape Memory Polymers (SMPs are smart materials that can recall their shape upon the application of a stimulus, which makes them appealing materials for a variety of applications, especially in biomedical devices. Most prior SMP research has focused on tuning bulk properties; studying surface effects of SMPs may extend the use of these materials to blood-contacting applications, such as cardiovascular stents, where surfaces that support rapid endothelialization have been correlated to stent success. Here, we evaluate endothelial attachment onto the surfaces of a family of SMPs previously developed in our group that have shown promise for biomedical devices. Nine SMP formulations containing varying amounts of tert-Butyl acrylate (tBA and Poly(ethylene glycol dimethacrylate (PEGDMA were analyzed for endothelial cell attachment. Dynamic mechanical analysis (DMA, contact angle studies, and atomic force microscopy (AFM were used to verify bulk and surface properties of the SMPs. Human umbilical vein endothelial cell (HUVEC attachment and viability was verified using fluorescent methods. Endothelial cells preferentially attached to SMPs with higher tBA content, which have rougher, more hydrophobic surfaces. HUVECs also displayed an increased metabolic activity on these high tBA SMPs over the course of the study. This class of SMPs may be promising candidates for next generation blood-contacting devices.

  19. Influence of Mo/MoSe{sub 2} microstructure on the damp heat stability of the Cu(In,Ga)Se{sub 2} back contact molybdenum

    Energy Technology Data Exchange (ETDEWEB)

    Theelen, Mirjam, E-mail: mirjam.theelen@tno.nl [TNO Solliance, Thin Film Technology, High Tech Campus 21, 5656 AE Eindhoven (Netherlands); Delft University of Technology, Photovoltaic Materials and Devices, Mekelweg 4, 2628 CD Delft (Netherlands); Harel, Sylvie [Institut des Matériaux Jean Rouxel (IMN)-UMR 6502, Université de Nantes, CNRS, 2 rue de la Houssinière, BP 32229, 44322 Nantes Cedex 3 (France); Verschuren, Melvin [TNO Solliance, Thin Film Technology, High Tech Campus 21, 5656 AE Eindhoven (Netherlands); Tomassini, Mathieu [Institut des Matériaux Jean Rouxel (IMN)-UMR 6502, Université de Nantes, CNRS, 2 rue de la Houssinière, BP 32229, 44322 Nantes Cedex 3 (France); Hovestad, Arjan [TNO Solliance, Thin Film Technology, High Tech Campus 21, 5656 AE Eindhoven (Netherlands); Barreau, Nicolas [Institut des Matériaux Jean Rouxel (IMN)-UMR 6502, Université de Nantes, CNRS, 2 rue de la Houssinière, BP 32229, 44322 Nantes Cedex 3 (France); Berkum, Jurgen van [Philips Innovation Services, High Tech Campus 11, 5656 AE Eindhoven (Netherlands); Vroon, Zeger [TNO Solliance, Thin Film Technology, High Tech Campus 21, 5656 AE Eindhoven (Netherlands); Zeman, Miro [Delft University of Technology, Photovoltaic Materials and Devices, Mekelweg 4, 2628 CD Delft (Netherlands)

    2016-08-01

    The degradation behavior of Mo/MoSe{sub 2} layers have been investigated using damp heat exposure. The two studied molybdenum based films with different densities and microstructures were obtained by lifting off Cu(In,Ga)Se{sub 2} layers from a bilayer molybdenum stack on soda lime glass. Hereby, a glass/Mo/MoSe{sub 2} was obtained, which resembles the back contact as present in Cu(In,Ga)Se{sub 2} solar cells. The samples were degraded for 150 h under standard damp heat conditions and analyzed before, during and after degradation. It was observed that the degradation resulted in the formation of needles and molybdenum oxide layers near the glass/Mo and the Mo/Cu(In,Ga)Se{sub 2} interfaces. X-ray Photoelectron Spectroscopy measurements have shown that the sodium was also present at the surface of the degraded material and it is proposed that the degraded material consists mostly of MoO{sub 3} with intercalated Na{sup +}. This element has likely migrated from the soda lime glass. This intercalation process could have led to the formation of Na{sub x}MoO{sub 3} ‘molybdenum bronze’ following this redox reaction: xNa{sup +} + MoO{sub 3} + xe{sup −} ↔ Na{sub x}MoO{sub 3} It is proposed that the formed oxide layer contains Na{sub x}MoO{sub 3} with different Na{sup +} contents and different grades of conductivity. This intercalation process can also explain the high mobility of Na{sup +} via the grain boundaries in molybdenum. It was also observed that the molybdenum film with a top layer deposited at a high pressure is more susceptible for damp heat degradation. - Highlights: • SLG/high pressure Mo/low pressure Mo/MoSe{sub 2} stacks were exposed to damp heat. • Molybdenum deposited at low pressure retained the best reflectivity and conductivity. • Damp heat exposure leads to a Na{sub x}MoO{sub 3}/Mo multilayer structure. • The Na{sub x}MoO{sub 3} probably consists of Na{sup +} intercalated in a (reduced) MoO{sub 3} matrix. • Intercalation can explain the

  20. RNA-SeQC: RNA-seq metrics for quality control and process optimization.

    Science.gov (United States)

    DeLuca, David S; Levin, Joshua Z; Sivachenko, Andrey; Fennell, Timothy; Nazaire, Marc-Danie; Williams, Chris; Reich, Michael; Winckler, Wendy; Getz, Gad

    2012-06-01

    RNA-seq, the application of next-generation sequencing to RNA, provides transcriptome-wide characterization of cellular activity. Assessment of sequencing performance and library quality is critical to the interpretation of RNA-seq data, yet few tools exist to address this issue. We introduce RNA-SeQC, a program which provides key measures of data quality. These metrics include yield, alignment and duplication rates; GC bias, rRNA content, regions of alignment (exon, intron and intragenic), continuity of coverage, 3'/5' bias and count of detectable transcripts, among others. The software provides multi-sample evaluation of library construction protocols, input materials and other experimental parameters. The modularity of the software enables pipeline integration and the routine monitoring of key measures of data quality such as the number of alignable reads, duplication rates and rRNA contamination. RNA-SeQC allows investigators to make informed decisions about sample inclusion in downstream analysis. In summary, RNA-SeQC provides quality control measures critical to experiment design, process optimization and downstream computational analysis. See www.genepattern.org to run online, or www.broadinstitute.org/rna-seqc/ for a command line tool.

  1. Theoretical and experimental studies of the ZnSe/CuInSe2 heterojunction band offset

    International Nuclear Information System (INIS)

    Nelson, A.J.; Schwerdtfeger, C.R.; Wei, S.; Zunger, A.; Rioux, D.; Patel, R.; Hoechst, H.

    1993-01-01

    We report first-principles band structure calculations that show that ZnSe/CuInSe 2 has a significant valence band offset (VBO, ΔE v ): 0.70±0.05 eV for the relaxed interface and 0.60±0.05 eV for the coherent interface. These large values demonstrate the failure of the common anion rule. This is traced to a stronger Cu,d-Se,p level repulsion in CuInSe 2 than the Zn,d-Se,p repulsion in ZnSe. The VBO was then studied by synchrotron radiation soft x-ray photoemission spectroscopy. ZnSe overlayers were sequentially grown in steps on n-type CuInSe 2 (112) single crystals at 200 degree C. In situ photoemission measurements were acquired after each growth in order to observe changes in the valence band electronic structure as well as changes in the In 4d and Zn 3d core lines. Results of these measurements reveal that the VBO is ΔE v =0.70±0.15 eV, in good agreement with the first-principles prediction

  2. Que se vea lo que se oye: a vueltas con los fonemas y las letras

    Directory of Open Access Journals (Sweden)

    Gómez del Estal Villarino, Mario

    2011-03-01

    Full Text Available Partiendo de lo que el refrán “La letra con sangre entra” viene a decir a quien se deje escucharlo, se abre una descripción de las diferencias radicales que se dan entre aprender a hablar y aprender a escribir. La relación entre ambas actividades no se puede entender sin analizar la tan extendida perversión que supone hablar lo que se escribe en vez de escribir lo que se habla. A continuación, se detallan algunos de los síntomas más frecuentes de dicha perversión, caracterizados todos por la intromisión de la conciencia en terrenos donde lo único que hace es estorbar, en especial la pronunciación pedantesca de ciertos finales silábicos o de palabra, como en traNSporte, aBStraKción, óPtico, oBjeto, fúTbol, libertaD, diGno o fraK, así como las distintas deformaciones que sufren las palabras que la ortografía académica prescribe que se escriban con la letra equis.

  3. Increased aluminum content in the spinal cord of amyotrophic lateral sclerosis and Parkinsonism-dementia of Guam and in the Kii Peninsula of Japan

    Energy Technology Data Exchange (ETDEWEB)

    Wakayama, Ikuro; Yoshida, Sohei [Wakayama Medical Coll. (Japan); Sasajima, Kazuhisa; Takada, Jitsuya; Yoshida, Koichi

    1994-07-01

    Aluminum content in the lumbar spinal cord of patients with amyotrophic lateral sclerosis(ALS) and Parkinsonism-dementia(PD) in the Kii Peninsula of Japan and in the island of Guam was measured using a particle induced X-ray emission analysis. We demonstrated that aluminum content was increased in the spinal cord of patients with ALS in two foci of the western Pacific, indicating aluminum to be a important factor in the process of spinal motor neuron degeneration. (author).

  4. Increased aluminum content in the spinal cord of amyotrophic lateral sclerosis and Parkinsonism-dementia of Guam and in the Kii Peninsula of Japan

    International Nuclear Information System (INIS)

    Wakayama, Ikuro; Yoshida, Sohei; Sasajima, Kazuhisa; Takada, Jitsuya; Yoshida, Koichi.

    1994-01-01

    Aluminum content in the lumbar spinal cord of patients with amyotrophic lateral sclerosis(ALS) and Parkinsonism-dementia(PD) in the Kii Peninsula of Japan and in the island of Guam was measured using a particle induced X-ray emission analysis. We demonstrated that aluminum content was increased in the spinal cord of patients with ALS in two foci of the western Pacific, indicating aluminum to be a important factor in the process of spinal motor neuron degeneration. (author)

  5. Peculiarities of physical and chemical processes of clinker formation in raw mixes with increased content of magnesium oxide in presence of barite waste

    Science.gov (United States)

    Novoselova, I. N.; Novosyolov, A. G.

    2018-03-01

    The article considers the influence of barite waste on clinker formation processes in raw mixes with the increased content of magnesium oxide. A by-product of the barite concentrate manufacture of Tolcheinskoye deposit has been used as a barite waste, its predominant content of barium sulphate BaSO4 amounts to 76,11%. The impact of BaO and SO3 has been revealed, particularly the impact of barium oxide on clinker formation processes in raw mixes with the increased content of magnesium oxide. It has been clarified that the addition of barite waste into a raw mix causes the formation of dicalcium silicate in two modifications, reduces the amount of alite and influences on the composition of tricalcium aluminate. Barium mono-alluminate is formed in the composition of the intermediate material. Solid solutions with barium oxide are formed in clinker phases. The authors have determined the saturation speed of calcium oxide in magnesium-bearing raw mixes with saturation coefficient (SC) 0,91 and 0,80 in the presence of 2 and 3% barite waste in the temperature range 1300-1450°C.

  6. Synthesis and properties of new CdSe-AgI-As2Se3 chalcogenide glasses

    International Nuclear Information System (INIS)

    Kassem, M.; Le Coq, D.; Fourmentin, M.; Hindle, F.; Bokova, M.; Cuisset, A.; Masselin, P.; Bychkov, E.

    2011-01-01

    Research highlights: → Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As 2 Se 3 system. → Characterization of macroscopic properties of the new CdSe-AgI-As 2 Se 3 glasses. → Far infrared transmission of chalcogenide glasses. → Characterization of the total conductivity of CdSe-AgI-As 2 Se 3 glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As 2 Se 3 system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T g ), crystallisation (T x ), and melting (T m ) temperatures are reported and used to calculate their ΔT = T x - T g and their Hruby, H r = (T x - T g )/(T m - T x ), criteria. Evolution of the total electrical conductivity σ and the room temperature conductivity σ 298 was also studied. The terahertz transparency domain in the 50-600 cm -1 region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

  7. SeP, ApoER2 and megalin as necessary factors to maintain Se homeostasis in mammals.

    Science.gov (United States)

    Krol, Magdalena Beata; Gromadzinska, Jolanta; Wasowicz, Wojciech

    2012-10-01

    Selenoprotein P (SeP) is an extracellular protein containing ten selenium atoms in the form of selenocysteine, secreted mainly from the liver. About 60% of the whole plasma selenium level is present in SeP, which makes it a useful biomarker of selenium nutritional status. The main functions of SeP are transport and storage of selenium in plasma. It is especially an important protein for the brain, testes and kidneys where the supplementation of the proper amount of Se ensures the synthesis of selenoenzymes with antioxidant properties.Recently, it has been found that SeP uptake in kidneys, testes and brain depends on the apolipoprotein receptor 2 (ApoER2) and lipoprotein megalin receptor (Lrp2). Megalin receptor represents a physiological SeP receptor in kidneys, mediating the re-uptake of secreted SeP from the primary urine. The absence of a functional megalin receptor causes a significant reduction of plasma selenium and the SeP levels as a result of Se excretion. ApoER2 is a SeP receptor in the brain and testes which uptakes Se from the extracellular fluid. Deletion of ApoER2 in mice leads to a lowered selenium level in the brain and testes, neurological dysfunction, production of abnormal spermatozoa, infertility and even death when the subjects are fed a low-selenium diet. Copyright © 2012 Elsevier GmbH. All rights reserved.

  8. Dynamical properties and their strain-dependence of ZnSe(ZnSe:N: Zinc-blende and wurtzite

    Directory of Open Access Journals (Sweden)

    Dandan Wang

    2014-06-01

    Full Text Available The lattice dynamical properties of ZnSe and ZnSe with substitutional N incorporation(ZnSe:N are investigated in both the zinc-blend(ZB and wurtzite(WZ structures using first-principles calculations. The optical phonon modes of ZB-ZnSe at the Γ-point locate at 250 cm−1 for LO and 213 cm−1 for TO. The characteristic E2 phonon modes at about 50 cm−1 and the E1 and another E2 phonon modes around 200 cm−1 of WZ-ZnSe are suggested to be the fingerprint for distinguishing the two polytypes of ZnSe. For substitutional N incorporated ZnSe, the N incorporation introduces three new high energy modes above 500 cm−1, and the splitting of them is much larger in the WZ phase than that in ZB phase. The strain dependence of phonon frequency which could be useful for corresponding spectroscopic strain characterization are also studied. The simple linear dependence is determined for ZB-ZnSe, while the situation for WZ-ZnSe looks more complicated.

  9. Synthesis Gas Purification Purification des gaz de synthèse

    Directory of Open Access Journals (Sweden)

    Chiche D.

    2013-10-01

    Full Text Available Fischer-Tropsch (FT based B-XTL processes are attractive alternatives for future energy production. These processes aim at converting lignocellulosic biomass possibly in co-processing with petcoke, coal, or vacuum residues into synthetic biofuels. A gasification step converts the feed into a synthesis gas (CO and H2 mixture , which undergoes the Fischer-Tropsch reaction after H2/CO ratio adjustment and CO2 removal. However synthesis gas also contains various impurities that must be removed in order to prevent Fischer-Tropsch catalyst poisoning. Due to the large feedstocks variety that can be processed, significant variations of the composition of the synthesis gas are expected. Especially, this affects the nature of the impurities that are present (element, speciation, as well as their relative contents. Moreover, due to high FT catalyst sensitivity, severe syngas specifications regarding its purity are required. For these reasons, synthesis gas purification constitutes a major challenge for the development of B-XTL processes. In this article, we focus on these major hurdles that have to be overcome. The different kinds of syngas impurities are presented. The influence of the nature of feedstocks, gasification technology and operating conditions on the type and content of impurities is discussed. Highlight is given on the fate of sulfur compounds, nitrogen compounds, halides, transition and heavy metals. Main synthesis gas purification technologies (based on adsorption, absorption, catalytic reactions, etc. are finally described, as well as the related challenges. Les procédés de synthèse de biocarburants par voie Fischer-Tropsch (FT, voies B-XTL, représentent des alternatives prometteuses pour la production d’énergie. Ces procédés permettent la conversion en carburants de synthèse de biomasse lignocellulosique, éventuellement mise en oeuvre en mélange avec des charges fossiles telles que petcoke, charbons ou résidus sous vide. Pour

  10. Anisotropy in CdSe quantum rods

    Energy Technology Data Exchange (ETDEWEB)

    Li, Liang-shi [Univ. of California, Berkeley, CA (United States)

    2003-01-01

    The size-dependent optical and electronic properties of semiconductor nanocrystals have drawn much attention in the past decade, and have been very well understood for spherical ones. The advent of the synthetic methods to make rod-like CdSe nanocrystals with wurtzite structure has offered us a new opportunity to study their properties as functions of their shape. This dissertation includes three main parts: synthesis of CdSe nanorods with tightly controlled widths and lengths, their optical and dielectric properties, and their large-scale assembly, all of which are either directly or indirectly caused by the uniaxial crystallographic structure of wurtzite CdSe. The hexagonal wurtzite structure is believed to be the primary reason for the growth of CdSe nanorods. It represents itself in the kinetic stabilization of the rod-like particles over the spherical ones in the presence of phosphonic acids. By varying the composition of the surfactant mixture used for synthesis we have achieved tight control of the widths and lengths of the nanorods. The synthesis of monodisperse CdSe nanorods enables us to systematically study their size-dependent properties. For example, room temperature single particle fluorescence spectroscopy has shown that nanorods emit linearly polarized photoluminescence. Theoretical calculations have shown that it is due to the crossing between the two highest occupied electronic levels with increasing aspect ratio. We also measured the permanent electric dipole moment of the nanorods with transient electric birefringence technique. Experimental results on nanorods with different sizes show that the dipole moment is linear to the particle volume, indicating that it originates from the non-centrosymmetric hexagonal lattice. The elongation of the nanocrystals also results in the anisotropic inter-particle interaction. One of the consequences is the formation of liquid crystalline phases when the nanorods are dispersed in solvent to a high enough

  11. The influence of CdSe and ZnSe nanoparticles on the optical properties of Sm{sup 3+} ions in lead borate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Mallur, Saisudha B.; Heidorn, William D.; Fatokun, Stephen O.; Joshi, Krishna D.; Bista, Sandip S.; Babu, Panakkattu K., E-mail: PK-Babu@wiu.edu [Western Illinois University, Department of Physics (United States)

    2017-03-15

    The effect of glass composition and the presence of CdSe/ZnSe nanoparticles (NPs) on the optical absorption and fluorescence of Sm-doped lead borate glasses are studied. Three sets of glass samples xPbO:(99.5-x) B{sub 2}O{sub 3}:0.5Sm{sub 2}O{sub 3}, x = 29.5–69.5 mol%, xPbO:(96.5-x) B{sub 2}O{sub 3}:0.5Sm{sub 2}O{sub 3}: 3CdSe/ZnSe, x = 36.5, and 56.5 mol% are prepared. NPs are grown by annealing these glasses just below the glass transition temperature. Average size of both types of NPs increases with annealing time; however, CdSe NPs grew to a larger size range (2 to 20 nm) compared to ZnSe NPs (1 to 16 nm). We analyzed the hypersensitive transition, intensity parameters, radiative transition probability, stimulated emission cross section (σ{sub p}), and the area ratio of the electric dipole/magnetic dipole transitions of Sm{sup 3+}. The intensity parameters show a minimum at 11 h annealing for 36.5 mol% and a maximum for the same annealing duration in 56.5 mol% PbO containing CdSe NPs. The σ{sub p} for 56.5 mol% of PbO with CdSe NPs is found to be a maximum when the average NP size is around 14 nm. ZnSe NPs containing glasses also show significant changes in σ{sub p} when the average particle size is ~16 nm, for 36.5 mol% PbO. Our results suggest that the optical properties of Sm{sup 3+} in lead borate glasses are sensitive to its electronic environment which can be modified by varying the base glass composition and/or incorporating large NPs of CdSe/ZnSe. The large σ{sub p} values that we observe for some of the glass compositions make them attractive materials for photonic devices and photovoltaic applications.

  12. Effect of irradiation on carbohydrates content

    International Nuclear Information System (INIS)

    Chantharasakul, S.

    1971-01-01

    Effect of gamma radiation on vitamin C and total acidity contents of Hom Tong banana was described. There was a slight decrease in vitamin C contents in both irradiated and non-irradiated banana during storage. No difference was detected in term of vitamin C contents between irradiated and non-irradiated banana at any storage time. The total acidity of the banana increased with increasing time of storage owing to the ripening effect of the fruit. Higher total acidity content of non-irradiated banana during storage indicated the faster rate of ripening of the fruit

  13. Preparation and characterization of CuInSe2 particles via the hydrothermal route for thin-film solar cells

    International Nuclear Information System (INIS)

    Wu, Chung-Hsien; Chen, Fu-Shan; Lin, Shin-Hom; Lu, Chung-Hsin

    2011-01-01

    Highlights: → A new hydrothermal process for preparing copper indium diselenide (CuInSe 2 ). → Well-crystallized CuInSe 2 particles are obtained at 180 deg. C for 1 h. → Densified CuInSe 2 thin films are prepared from ink printing. → Increasing temperatures result in an improvement of properties of CuInSe 2 films. - Abstract: CuInSe 2 powders with a chalcopyrite structure used in thin-film solar cells were successfully prepared via a hydrothermal method at low temperatures within short durations. Well-crystallized CuInSe 2 particles were formed via the hydrothermal reaction at 180 deg. C for 1 h. The concentrations of stabilizer, triethanolamine (TEA), significantly affected the purity, morphology and particle sizes of the prepared powders. Increasing the reaction duration and temperatures led to decrease the amount of second phase In(OH) 3 and resulted in the formation of pure CuInSe 2 . Densified CuInSe 2 thin films were prepared from ink printing with the addition of the flux. Increasing the selenization temperatures increased the grain size and improved the crystallinity of CuInSe 2 films.

  14. Sample Set (SE): SE50 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available oids We report that flavonoids with radical scavenging activity mitigate against ox...ress. These data confirm the usefulness of flavonoids for enhancing both biotic and abiotic stress tolerance...SE50 Enhancement of oxidative and drought tolerance in arabidopsis by overaccumulation of antioxidant flavon

  15. Sample Set (SE): SE52 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE52 Mass spectra-based framework for automated structural elucidation of metabolom...e data to explore phytochemical diversity A novel framework for automated elucidation of metabolite structur...te ontology system was also introduced to attain putative characterization of the metabolite signals.The automate

  16. Maize sugary enhancer1 (se1) is a presence-absence variant of a previously uncharacterized gene and development of educational videos to raise the profile of plant breeding and improve curricula

    Science.gov (United States)

    Haro von Mogel, Karl J.

    Carbohydrate metabolism is a biologically, economically, and culturally important process in crop plants. Humans have selected many crop species such as maize (Zea mays L.) in ways that have resulted in changes to carbohydrate metabolic pathways, and understanding the underlying genetics of this pathway is therefore exceedingly important. A previously uncharacterized starch metabolic pathway mutant, sugary enhancer1 (se1), is a recessive modifier of sugary1 (su1) sweet corn that increases the sugar content while maintaining an appealing creamy texture. This allele has been incorporated into many sweet corn varieties since its discovery in the 1970s, however, testing for the presence of this allele has been difficult. A genetic stock was developed that allowed the presence of se1 to be visually scored in segregating ears, which were used to genetically map se1 to the deletion of a single gene model located on the distal end of the long arm of chromosome 2. An analysis of homology found that this gene is specific to monocots, and the gene is expressed in the endosperm and developing leaf. The se1 allele increased water soluble polysaccharide (WSP) and decreased amylopectin in maize endosperm, but there was no overall effect on starch content in mature leaves due to se1. This discovery will lead to a greater understanding of starch metabolism, and the marker developed will assist in breeding. There is a present need for increased training for plant breeders to meet the growing needs of the human population. To raise the profile of plant breeding among young students, a series of videos called Fields of Study was developed. These feature interviews with plant breeders who talk about what they do as plant breeders and what they enjoy about their chosen profession. To help broaden the education of students in college biology courses, and assist with the training of plant breeders, a second video series, Pollination Methods was developed. Each video focuses on one or two

  17. Effect of selenium-saturated bovine lactoferrin (Se-bLF) on antioxidant enzyme activities in human gut epithelial cells under oxidative stress.

    Science.gov (United States)

    Burrow, Hannah; Kanwar, Rupinder K; Mahidhara, Ganesh; Kanwar, Jagat R

    2011-10-01

    Cancer and many chronic inflammatory diseases are associated with increased amounts of reactive oxygen species (ROS). The potential cellular and tissue damage created by ROS has significant impact on many disease and cancer states and natural therapeutics are becoming essential in regulating altered redox states. We have shown recently that iron content is a critical determinant in the antitumour activity of bovine milk lactoferrin (bLF). We found that 100% iron-saturated bLF (Fe-bLF) acts as a potent natural adjuvant and fortifying agent for augmenting cancer chemotherapy and thus has a broad utility in the treatment of cancer. Furthermore, we also studied the effects of iron saturated bLF's ability as an antioxidant in the human epithelial colon cancer cell line HT29, giving insights into the potential of bLF in its different states. Thus, metal saturated bLF could be implemented as anti-cancer neutraceutical. In this regard, we have recently been able to prepare a selenium (Se) saturated form of bLF, being up to 98% saturated. Therefore, the objectives of this study were to determine how oxidative stress induced by hydrogen peroxide (H2O2) alters antioxidant enzyme activity within HT29 epithelial colon cancer cells, and observe changes in this activity by treatments with different antioxidants ascorbic acid (AA), Apo (iron free)-bLF and selenium (Se)-bLF. The states of all antioxidant enzymes (glutathione peroxidase (GPx), glutathione reductase (GR), glutathione- s-transferase (GsT), catalase and superoxide dismutase (SOD)) demonstrated high levels within untreated HT29 cells compared to the majority of other treatments being used, even prior to H2O2 exposure. All enzymes showed significant alterations in activity when cells were treated with antioxidants AA, Apo-bLF or Se-bLF, with and/or without H2O2 exposure. Obvious indications that the Se content of the bLF potentially interacted with the glutathione (GSH)/GPx/GR/GsT associated redox system could be

  18. Accumulation of selenium and assessment of the microelements contents in rape spring on meadow-black soil

    International Nuclear Information System (INIS)

    Ermokhin, Yu.I.; Sindireva, A.V.

    2008-01-01

    Quantitative correlation was installed as a result of work between arrival of the selenium on meadow-black soil and contents of this element in green mass of the rape spring. Correlation between the contents of Se and Cd, Ni, Zn in green mass at the rape spring was studied. In this article the assessment of the microelements contents depending on doses and methods of using selenium is offered

  19. Increased protein content of chickpea (Cicer arietinum L.) inoculated with arbuscular mycorrhizal fungi and nitrogen-fixing bacteria under water deficit conditions.

    Science.gov (United States)

    Oliveira, Rui S; Carvalho, Patrícia; Marques, Guilhermina; Ferreira, Luís; Nunes, Mafalda; Rocha, Inês; Ma, Ying; Carvalho, Maria F; Vosátka, Miroslav; Freitas, Helena

    2017-10-01

    Chickpea (Cicer arietinum L.) is a widely cropped pulse and an important source of proteins for humans. In Mediterranean regions it is predicted that drought will reduce soil moisture and become a major issue in agricultural practice. Nitrogen (N)-fixing bacteria and arbuscular mycorrhizal (AM) fungi have the potential to improve plant growth and drought tolerance. The aim of the study was to assess the effects of N-fixing bacteria and AM fungi on the growth, grain yield and protein content of chickpea under water deficit. Plants inoculated with Mesorhizobium mediterraneum or Rhizophagus irregularis without water deficit and inoculated with M. mediterraneum under moderate water deficit had significant increases in biomass. Inoculation with microbial symbionts brought no benefits to chickpea under severe water deficit. However, under moderate water deficit grain crude protein was increased by 13%, 17% and 22% in plants inoculated with M. mediterraneum, R. irregularis and M. mediterraneum + R. irregularis, respectively. Inoculation with N-fixing bacteria and AM fungi has the potential to benefit agricultural production of chickpea under water deficit conditions and to contribute to increased grain protein content. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  20. Reduced recombination in a surface-sulfurized Cu(InGa)Se2 thin-film solar cell

    Science.gov (United States)

    Kim, Shinho; Nishinaga, Jiro; Kamikawa, Yukiko; Ishizuka, Shogo; Nagai, Takehiko; Koida, Takashi; Tampo, Hitoshi; Shibata, Hajime; Matsubara, Koji; Niki, Shigeru

    2018-05-01

    This study demonstrates surface sulfurization effects on Cu(InGa)Se2 (CIGSe) thin-film solar cells with a single back-graded band gap. Single back-graded CIGSe thin films were prepared via a three-stage process in a high-vacuum molecular beam epitaxial growth chamber and were subsequently annealed in a tube furnace under environmental conditions with H2S gas. After sulfurization, an ∼80- to ∼100-nm-thick CuIn(SSe)2 layer with significantly small Ga contents (CISSe:Ga) was formed on the CIGSe layer. The newly formed CISSe:Ga layer exhibited graded S contents from surface to bulk, thus resulting in a front-graded band gap. In addition, CISSe:Ga was covered with S-enriched CISSe region that was extended from the surface to a depth of a few nm and was depleted of Ga. A device with the sulfurized CIGSe showed reduced recombination at the buffer–absorber interface, in space-charge region and in bulk. Consequently, the open circuit voltage increased from 0.58 V (in the non-sulfurized case) to 0.66 V, and the conversion efficiency improved from 15.5 to 19.4%. This large improvement is caused by the front graded band gap at the surface and the hole-blocking barrier, which suppress recombination at the CdS/CISSe:Ga interface. In addition, sulfurization followed by KF post-deposition treatment (PDT) increased the efficiency to 20.1%. Compared to the untreated sulfurized device, the KF-PDT device delivered an increased carrier lifetime and reduced the recombination in bulk probably because the defects were passivated by the K, which penetrated into the bulk region.

  1. Effect of various amounts of graphene oxide on the degradation characteristics of the ZnSe/graphene nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, S.H. [Department of Materials Science and Engineering, National Formosa University, 64, Wunhua Road, Huwei, Yunlin 632, Taiwan (China); Chen, W.J., E-mail: chenwjau@yuntech.edu.tw [Graduate School of Materials Science, National Yunlin University of Science and Technology, 123 University Road, Section 3, Douliou, Yunlin 64002, Taiwan (China); Yeh, T.H. [Graduate School of Materials Science, National Yunlin University of Science and Technology, 123 University Road, Section 3, Douliou, Yunlin 64002, Taiwan (China)

    2015-12-15

    Graphical abstract: When the ratio of the addition of GO to the amount of ZnSe–N{sub 2}H{sub 4} increases from 0.25 to 1, the degradation effect of GN–5 ml ZnSe on MB increases with increasing GO; the degradation efficiency of GN–ZnSe for MB increased from 35.4% to 99.6% after 6 h of visible light irradiation, which was the optimum degradation efficiency obtained in the present study. When the ratio of the addition of GO to the amount of ZnSe–N{sub 2}H{sub 4} increased from 1 to 2, the degradation efficiency of GN–5 ml ZnSe for MB decreased with the increasing addition of GO; the degradation efficiency of GN–5 ml ZnSe (2) only slightly decreased to 95.3% after 6 h of visible light irradiation. - Highlights: • The ZnSe/graphene nanocomposite was prepared using hydrothermal methods. • The ZnSe–N{sub 2}H{sub 4} reacted with different amount of GO and formed a ZnSe/graphene. • The degradation efficiency of the ZnSe/graphene depends on the amount of GO. • The photocatalytic activity was measured by the degradation of methylene blue. - Abstract: In this work, the graphene oxide (GO) sheets were synthesized by modified Hummers and Offeman's method. The GO was mixed with ZnSe that was prepared using various amounts of N{sub 2}H{sub 4} at a ratio of (0.25–2):1 to form precursors. The ZnSe/graphene nanocomposites were synthesized under hydrothermal conditions (180 °C; 12 h) from the previous precursor. Obtained ZnSe/graphene photocatalysts were characterized by X-ray diffraction analysis (XRD), Fourier transform infrared (FTIR) spectroscopy, UV–vis diffuse reflection spectroscopy, transmission electron microscope, scanning electron microscope, Raman spectra and X-ray photoelectron spectroscopy (XPS). Photocatalytic activity under visible light is evaluated in methylene blue (MB) dye degradation reaction in aqueous phase. The results show that the formation of ZnSe/graphene nanocomposite is depend on ratio of the addition of GO to the amount of

  2. Phase diagram of the Sb-Se-I system and thermodynamic properties of SbSeI

    International Nuclear Information System (INIS)

    Aliev, Z.S.; Musaeva, S.S.; Babanly, D.M.; Shevelkov, A.V.; Babanly, M.B.

    2010-01-01

    The Sb-Se-I system was investigated by using the DTA and XRD analyses and EMF measurements with an antimony electrode. The T-x diagram of the binary Sb-I system was accurately redefined. A number of polythermal sections and the projection of the liquidus surface were constructed. The fields of the primary crystallization, as well as the types and coordinates of non- and monovariant equilibria were determined. It is shown that the quasi-binary sections Sb 2 Se 3 -SbI 3 , Sb-SbSeI, SbI 3 -Se, and SbSeI-Se triangulate the Sb-Se-I system, leading to five independent subsystems. A broad area of immiscibility, that overlaps a certain part of the antimony primary crystallization field, was found. From the EMF measurements, the partial molar functions of antimony (ΔG-bar, ΔH-bar, ΔS-bar) as well as standard integral thermodynamic functions of SbSeI were calculated. The latter were found to have the following values: ΔG f,298 0 =-80.12±1.81kJ/mol; ΔH f,298 0 =-77.3±1.8kJ/mol; S 298 0 =155.2±9.5J/(molK).

  3. Phase diagram of the Sb-Se-I system and thermodynamic properties of SbSeI

    Energy Technology Data Exchange (ETDEWEB)

    Aliev, Z S; Musaeva, S S; Babanly, D M [Baku State University, General and Inorganic Chemistry Department (Azerbaijan); Shevelkov, A.V., E-mail: shev@inorg.chem.msu.r [Moscow Lomonosov State University, Chemistry Department (Russian Federation); Babanly, M.B., E-mail: Babanly_mb@rambler.r [Baku State University, General and Inorganic Chemistry Department (Azerbaijan)

    2010-09-03

    The Sb-Se-I system was investigated by using the DTA and XRD analyses and EMF measurements with an antimony electrode. The T-x diagram of the binary Sb-I system was accurately redefined. A number of polythermal sections and the projection of the liquidus surface were constructed. The fields of the primary crystallization, as well as the types and coordinates of non- and monovariant equilibria were determined. It is shown that the quasi-binary sections Sb{sub 2}Se{sub 3}-SbI{sub 3}, Sb-SbSeI, SbI{sub 3}-Se, and SbSeI-Se triangulate the Sb-Se-I system, leading to five independent subsystems. A broad area of immiscibility, that overlaps a certain part of the antimony primary crystallization field, was found. From the EMF measurements, the partial molar functions of antimony ({Delta}G-bar, {Delta}H-bar, {Delta}S-bar) as well as standard integral thermodynamic functions of SbSeI were calculated. The latter were found to have the following values: {Delta}G{sub f,298}{sup 0}=-80.12{+-}1.81kJ/mol; {Delta}H{sub f,298}{sup 0}=-77.3{+-}1.8kJ/mol; S{sub 298}{sup 0}=155.2{+-}9.5J/(molK).

  4. Electronic-level interactions of tungsten oxide with unsupported Se/Ru electrocatalytic nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Lewera, Adam; Miecznikowski, Krzysztof [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland); Hunger, Ralf [Institute of Materials Science, Darmstadt University of Technology, Darmstadt (Germany); Kolary-Zurowska, Aneta [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland); Wieckowski, Andrzej [Department of Chemistry, University of Illinois at Urbana-Champaign, Urbana, IL (United States); Kulesza, Pawel J., E-mail: pkulesza@chem.uw.edu.p [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland)

    2010-11-01

    Se/Ru nanoparticles - a potent non-platinum catalyst towards oxygen reduction reaction - were modified by hydrated WO{sub 3} and investigated using the rotating disk/ring electrode methods and by synchrotron X-ray photoelectron spectroscopy. The modification resulted in an enhanced catalytic activity towards oxygen reduction reaction (ORR). Our data indicate that the oxygen reduction current starts ca. 70 mV more positive and formation of undesirable hydrogen peroxide has significantly decreased following the modification of Se/Ru with WO{sub 3}. X-ray photoelectron spectroscopy reveals that WO{sub 3} interacts electronically with Se/Ru as the W 4f and Se 3d line-shapes change. We therefore conclude that the electronic interactions between Se/Ru and WO{sub 3} are primarily responsible for the increase in activity and selectivity of the WO{sub 3}-modified Se/Ru towards ORR.

  5. Electronic-level interactions of tungsten oxide with unsupported Se/Ru electrocatalytic nanoparticles

    International Nuclear Information System (INIS)

    Lewera, Adam; Miecznikowski, Krzysztof; Hunger, Ralf; Kolary-Zurowska, Aneta; Wieckowski, Andrzej; Kulesza, Pawel J.

    2010-01-01

    Se/Ru nanoparticles - a potent non-platinum catalyst towards oxygen reduction reaction - were modified by hydrated WO 3 and investigated using the rotating disk/ring electrode methods and by synchrotron X-ray photoelectron spectroscopy. The modification resulted in an enhanced catalytic activity towards oxygen reduction reaction (ORR). Our data indicate that the oxygen reduction current starts ca. 70 mV more positive and formation of undesirable hydrogen peroxide has significantly decreased following the modification of Se/Ru with WO 3 . X-ray photoelectron spectroscopy reveals that WO 3 interacts electronically with Se/Ru as the W 4f and Se 3d line-shapes change. We therefore conclude that the electronic interactions between Se/Ru and WO 3 are primarily responsible for the increase in activity and selectivity of the WO 3 -modified Se/Ru towards ORR.

  6. Sensor Exposure, Exploitation, and Experimentation Environment (SE4)

    Science.gov (United States)

    Buell, D.; Duff, F.; Goding, J.; Bankston, M.; McLaughlin, T.; Six, S.; Taylor, S.; Wootton, S.

    2011-09-01

    As the resident space object population increases from new launches and events such as the COSMOS/IRIDIUM collision, the maintenance of high-level Space Situational Awareness (SSA) has become increasingly difficult. To maintain situational awareness of the changing environment, new systems and methods must be developed. The Sensor Exposure, Exploitation and Experimentation Environment (SE4) provides a platform to illustrate “The Art of the Possible” that shows the potential benefit of enriched sensor data collections and real-time data sharing. Through modeling and simulation, and a net-centric architecture, SE4 shows the added value of sharing data in real-time and exposing new types of sensor data. The objective of SE4 is to develop an experimentation and innovation environment for sensor data exposure, composable sensor capabilities, reuse, and exploitation that accelerates the delivery of needed Command and Control, Intelligence, Surveillance, and Reconnaissance capabilities to the warfighter. Through modeling, simulation and rapid prototyping, the art of the possible for a fully-connected, net-centric space Command and Control (C2) and sensor enterprise can be demonstrated. This paper provides results that demonstrate the potential for faster cataloging of breakup events and additional event monitoring that are possible with data available today in the Space Surveillance Network (SSN). Demonstrating the art of the possible for the enterprise will guide net-centric requirements definition and facilitate discussions with stakeholder organizations on the Concept of Operations (CONOPS), policy, and Tactics, Techniques, and Procedures (TTP) evolution necessary to take full advantage of net-centric operations. SE4 aligns with direction from Secretary Gates and the Chairman Joint Chief of Staff that emphasizes the need to get the most out of our existing systems. Continuing to utilize SE4 will enable the enterprise by demonstrating the benefits of applying

  7. Generalized stacking fault energies, cleavage energies, ionicity and brittleness of Cu(Al/Ga/In)Se2 and CuGa(S/Se/Te)2

    Science.gov (United States)

    Xue, H. T.; Tang, F. L.; Gruhn, T.; Lu, W. J.; Wan, F. C.; Rui, Z. Y.; Feng, Y. D.

    2014-04-01

    We calculate the generalized stacking fault (GSF) energies and cleavage energies γcl of the chalcopyrite compounds CuAlSe2, CuGaSe2, CuInSe2, CuGaS2 and CuGaTe2 using first principles. From the GSF energies, we obtain the unstable stacking fault energies γus and intrinsic stacking fault energies γisf. By analyzing γus and γisf, we find that the \\langle \\bar{{1}}\\,1\\,0\\rangle (1 1 2) direction is the easiest slip direction for these five compounds. Also, for CuInSe2, it is most possible to undergo a dislocation-nucleation-induced plastic deformation along the \\langle \\bar{{1}}\\,1\\,0\\rangle (1 1 2) slip direction. We show that the (1 1 2) plane is the preferable plane for fracture in the five compounds by comparing γcl of the (0 0 1) and (1 1 2) planes. It is also found that both γus and γcl decrease as the cationic or anionic radius increases in these chalcopyrites, i.e. along the sequences CuAlSe2 → CuGaSe2 → CuInSe2 and CuGaS2 → CuGaSe2 → CuGaTe2. Based on the values of the ratio γcl/γus, we discuss the brittle-ductile properties of these compounds. All of the compounds can be considered as brittle materials. In addition, a strong relationship between γcl/γus and the total proportion of ionic bonding in these compounds is found.

  8. Tuning the emission of aqueous Cu:ZnSe quantum dots to yellow light window

    International Nuclear Information System (INIS)

    Wang, Chunlei; Hu, Zhiyang; Xu, Shuhong; Wang, Yanbin; Zhao, Zengxia; Wang, Zhuyuan; Cui, Yiping

    2015-01-01

    Synthesis of internally doped Cu:ZnSe QDs in an aqueous solution still suffers from narrow tunable emissions from the blue to green light window. In this work, we extended the emission window of aqueous Cu:ZnSe QDs to the yellow light window. Our results show that high solution pH, multiple injections of Zn precursors, and nucleation doping strategy are three key factors for preparing yellow emitted Cu:ZnSe QDs. All these factors can depress the reactivity of CuSe nuclei and Zn monomers, promoting ZnSe growth outside CuSe nuclei rather than form ZnSe nuclei separately. With increased ZnSe QD size, the conduction band and nearby trap state energy levels shift to higher energy sites, causing Cu:ZnSe QDs to have a much longer emission. (paper)

  9. The Roy Adaptation Model and Content Analysis

    OpenAIRE

    Fawcett, Jacqueline

    2006-01-01

    The purpose of this paper is to explain how the Roy Adaptation Model can be used to guide a combined qualitative and quantitative content analysis of responses to open-ended interviews questions. Responses can be categorized as adaptive or ineffective within the physiological, self-concept, role function, and interdependence modes of adaptation and then tallied to yield an adaptation score. El objetivo del presente estudio consiste en explicar de qué manera se puede utilizar el Modelo de A...

  10. Effect of Indium nano-sandwiching on the structural and optical performance of ZnSe films

    Directory of Open Access Journals (Sweden)

    S.E. Al Garni

    Full Text Available In the current study, we attempted to explore the effects of the Indium nanosandwiching on the mechanical and optical properties of the physically evaporated ZnSe thin films by means of X-ray diffractions and ultraviolet spectrophotometry techniques. While the thickness of each layer of ZnSe was fixed at 1.0 μm, the thickness of the nanosandwiched Indium thin films was varied in the range of 25–100 nm. It was observed that the as grown ZnSe films exhibits cubic and hexagonal nature of crystallization as those of the ZnSe powders before the film deposition. The cubic phases weighs ∼70% of the structure. The analysis of this phases revealed that there is a systematic variation process presented by the decreasing of; the lattice constant, compressing strain, stress, stacking faults and dislocation intensity and increasing grain size resulted from increasing the Indium layer thickness in the range of 50–100 nm. In addition, the nanosandwiching of Indium between two layers of ZnSe is observed to enhance the absorbability of the ZnSe. Particularly, at incident photon energy of 2.38 eV the absorbability of the ZnSe films which are sandwiched with 100 nm Indium is increased by 13.8 times. Moreover, increasing the thickness of the Indium layer shrinks the optical energy band gap. These systematic variations in mechanical and optical properties are assigned to the better recrystallization process that is associated with Indium insertion which in turn allows total internal energy redistribution in the ZnSe films through the enlargement of grains. Keywords: ZnSe, Nanosandwiching, Mechanical, Optical gap

  11. Influence of CdTe sub-monolayer stressor on CdSe quantum dot self-assembling in ZnSe

    International Nuclear Information System (INIS)

    Sedova, I.V.; Lyublinskaya, O.G.; Sorokin, S.V.; Sitnikova, A.A.; Solnyshkov, D.D.; Rykhova, O.V.; Toropov, A.A.; Ivanov, S.V.

    2006-01-01

    This paper reports on the attempt to apply the stressor-controlled quantum dot (QD) fabrication technique to the conventional CdSe/ZnSe nanostructures. Super-strained CdTe fractional monolayer (Δa/a∝14% for CdTe/ZnSe) grown on top of the Te-stabilized ZnSe surface prior to deposition of the QD material (CdSe) has been used as a stressor which is expected to affect size, composition and density of CdSe QDs. The grown structures are studied by X-ray diffraction, transmission-electron microscopy, photoluminescence (PL) and PL excitation in comparison with conventional CdSe/ZnSe QDs obtained by a modified migration enhanced epitaxy technique. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  12. Structural and optical properties of nanocrystalline CdSe and Al:CdSe thin films for photoelectrochemical application

    Energy Technology Data Exchange (ETDEWEB)

    Gawali, Sanjay A. [Electrochemical Materials Laboratory, Department of Physics, Shivaji University, Kolhapur - 416 004 (India); Bhosale, C.H., E-mail: bhosale_ch@yahoo.com [Electrochemical Materials Laboratory, Department of Physics, Shivaji University, Kolhapur - 416 004 (India)

    2011-10-03

    Highlights: {yields} The CdSe and Al:CdSe thin films have been successfully deposited by SPT. {yields} Hexagonal cubic structured CdSe and Al: CdSe thin films are observed. {yields} Large number of fine grains, Uniform and compact growth morphology. {yields} Hydrophilic surface nature. {yields} Al:CdSe have better PEC performance than CdSe. - Abstract: Nanocrystalline CdSe and Al:CdSe semiconductor thin films have been successfully synthesized onto amorphous and FTO glass substrates by spray pyrolysis technique. Aqueous solutions containing precursors of Cd and Se have been used to obtain good quality films. The optimized films have been characterized for their structural, morphological, wettability and optical properties. X-ray diffraction (XRD) studies show that the films are polycrystalline in nature with hexagonal crystal structure. Scanning electron microscopy (SEM) studies show that the film surface is smooth, uniform and compact in nature. Water wettability study reveals that the films are hydrophilic behavior. The formation of CdSe and Al:CdSe thin film were confirmed with the help of FTIR spectroscopy. UV-vis spectrophotometric measurement showed a direct allowed band gap lying in the range 1.673-1.87 eV. Output characteristics were studied by using cell configuration n- CdSe/Al:CdSe |1 M (NaOH + Na{sub 2} + S)|C. An efficient solar cell having a power conversion efficiency of 0.38% at illumination 25 mW cm{sup -2} was fabricated.

  13. Señas Mexicano

    Directory of Open Access Journals (Sweden)

    Juan F. García Mejía

    2007-01-01

    Full Text Available En este artículo se muestra un sistema que permite el estudio y práctica del Lenguaje de Señas Mexicano (LMS, el cual es el método de comunicación de las personas que padecen un trastorno de procesamiento auditivo. El sistema propuesto en este artículo consta de un guante de tela instrumentado con sensores de flexión, una etapa de acondicionamiento de señales y una tarjeta de adquisición de datos; que en su conjunto constituyen el Hardware. El software esta formado por un programa de adquisición de datos y una interfaz de usuario, ambos codificados en Visual Basic Net. El sistema propuesto se modela por medio del lenguaje de modelado unificado (UML, ya que Visual Basic es un lenguaje orientado a eventos.

  14. Sample Set (SE): SE27 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE27 Effect of agricultural films for cabbage leaf metabolites Investigation of Bra...ssica oleracea var. capitata YR Tenkuu leaf metabolites. 3 growth conditions (covered with normal or UV cut agricultura...l film or no agricultural film), 3 replicates data are examined. Takeshi Ara 1, Naoki Yamamoto 1,

  15. Monitoring Freshman College Experience Through Content Analysis of Tweets: Observational Study.

    Science.gov (United States)

    Liu, Sam; Zhu, Miaoqi; Young, Sean D

    2018-01-11

    Freshman experiences can greatly influence students' success. Traditional methods of monitoring the freshman experience, such as conducting surveys, can be resource intensive and time consuming. Social media, such as Twitter, enable users to share their daily experiences. Thus, it may be possible to use Twitter to monitor students' postsecondary experience. Our objectives were to (1) describe the proportion of content posted on Twitter by college students relating to academic studies, personal health, and social life throughout the semester; and (2) examine whether the proportion of content differed by demographics and during nonexam versus exam periods. Between October 5 and December 11, 2015, we collected tweets from 170 freshmen attending the University of California Los Angeles, California, USA, aged 18 to 20 years. We categorized the tweets into topics related to academic, personal health, and social life using keyword searches. Mann-Whitney U and Kruskal-Wallis H tests examined whether the content posted differed by sex, ethnicity, and major. The Friedman test determined whether the total number of tweets and percentage of tweets related to academic studies, personal health, and social life differed between nonexam (weeks 1-8) and final exam (weeks 9 and 10) periods. Participants posted 24,421 tweets during the fall semester. Academic-related tweets (n=3433, 14.06%) were the most prevalent during the entire semester, compared with tweets related to personal health (n=2483, 10.17%) and social life (n=1646, 6.74%). The proportion of academic-related tweets increased during final-exam compared with nonexam periods (mean rank 68.9, mean 18%, standard error (SE) 0.1% vs mean rank 80.7, mean 21%, SE 0.2%; Z=-2.1, P=.04). Meanwhile, the proportion of tweets related to social life decreased during final exams compared with nonexam periods (mean rank 70.2, mean 5.4%, SE 0.01% vs mean rank 81.8, mean 7.4%, SE 0.01%; Z=-4.8, P.05). However, during the final-exam periods

  16. Antiphase Boundaries in the Turbostratically Disordered Misfit Compound (BiSe)(1+δ)NbSe2.

    Science.gov (United States)

    Mitchson, Gavin; Falmbigl, Matthias; Ditto, Jeffrey; Johnson, David C

    2015-11-02

    (BiSe)(1+δ)NbSe2 ferecrystals were synthesized in order to determine whether structural modulation in BiSe layers, characterized by periodic antiphase boundaries and Bi-Bi bonding, occurs. Specular X-ray diffraction revealed the formation of the desired compound with a c-axis lattice parameter of 1.21 nm from precursors with a range of initial compositions and initial periodicities. In-plane X-ray diffraction scans could be indexed as hk0 reflections of the constituents, with a rectangular basal BiSe lattice and a trigonal basal NbSe2 lattice. Electron micrographs showed extensive turbostratic disorder in the samples and the presence of periodic antiphase boundaries (approximately 1.5 nm periodicity) in BiSe layers oriented with the [110] direction parallel to the zone axis of the microscope. This indicates that the structural modulation in the BiSe layers is not due to coherency strain resulting from commensurate in-plane lattices. Electrical transport measurements indicate that holes are the dominant charge carrying species, that there is a weak decrease in resistivity as temperature decreases, and that minimal charge transfer occurs from the BiSe to NbSe2 layers. This is consistent with the lack of charge transfer from the BiX to the TX2 layers reported in misfit layer compounds where antiphase boundaries were observed. This suggests that electronic considerations, i.e., localization of electrons in the Bi-Bi pairs at the antiphase boundaries, play a dominant role in stabilizing the structural modulation.

  17. Understanding Content-and-Structure

    NARCIS (Netherlands)

    Kamps, J.; Marx, M.J.; de Rijke, M.; Sigurbjörnsson, B.; Trotman, A.; Lalmas, M.; Fuhr, N.

    2005-01-01

    Document-centric XML is a mixture of text and structure. +With the increased availability of document-centric XML content comes a need for query facilities in which both structural constraints and constraints on the content of the documents can be expressed. This has generated considerable interest

  18. Production of urinary selenium metabolites in the rat following 75SeO32- administration

    International Nuclear Information System (INIS)

    Kiker, K.W.; Burk, R.F.

    1974-01-01

    Urinary metabolites of 75 Se were studied in male Holtzmann rats fed a Torula yeast diet with either no selenium (basal) or 0.5 ppM selenium (selenium) added as sodium selenite. The animals were anesthetized, a ureter was cannulated, and 20 μCi of 75 SeO 3 2- were injected intraportally. Only a small fraction (1.3 percent) of the injected 75 Se was excreted in 6 h by animals fed the basal diet but 13.3 percent was excreted by animals fed the selenium diet. Paper chromatography showed that both groups excreted mostly inorganic 75 Se in the first 10 min. A decrease in 75 Se excretion followed, and then, 70 min after the collection was started, the selenium diet group had an increase in 75 Se excretion which persisted for the rest of the 6 h and consisted mainly of the organic metabolites trimethylselenonium ion and U-2. 75 Se excretion remained low in the basal diet group. Liver uptake and release of 75 Se in the 1 h following intraperitoneal 75 SeO 3 2- injection was much greater in the selenium diet rats than in the basal diet rats. These results suggest that the greater excretion of 75 Se by rats fed the selenium diet than that by rats fed the basal diet was due to increased production of organic urinary selenium metabolites by the liver. (U.S.)

  19. Optical absorption of CdSe quantum dots on electrodes with different morphology

    Directory of Open Access Journals (Sweden)

    Witoon Yindeesuk

    2013-10-01

    Full Text Available We have studied the optical absorption of CdSe quantum dots (QDs adsorbed on inverse opal TiO2 (IO-TiO2 and nanoparticulate TiO2 (NP-TiO2 electrodes using photoacoustic (PA measurements. The CdSe QDs were grown directly on IO-TiO2 and NP-TiO2 electrodes by a successive ionic layer adsorption and reaction (SILAR method with different numbers of cycles. The average diameter of the QDs was estimated by applying an effective mass approximation to the PA spectra. The increasing size of the QDs with increasing number of cycles was confirmed by a redshift in the optical absorption spectrum. The average diameter of the CdSe QDs on the IO-TiO2 electrodes was similar to that on the NP-TiO2 ones, indicating that growth is independent of morphology. However, there were more CdSe QDs on the NP-TiO2 electrodes than on the IO-TiO2 ones, indicating that there were different amounts of active sites on each type of electrode. In addition, the Urbach parameter of the exponential optical absorption tail was also estimated from the PA spectrum. The Urbach parameter of CdSe QDs on IO-TiO2 electrodes was higher than that on NP-TiO2 ones, indicating that CdSe QDs on IO-TiO2 electrodes are more disordered states than those on NP-TiO2 electrodes. The Urbach parameter decreases in both cases with the increase of SILAR cycles, and it tended to move toward a constant value.

  20. Study of sub band gap absorption of Sn doped CdSe thin films

    International Nuclear Information System (INIS)

    Kaur, Jagdish; Rani, Mamta; Tripathi, S. K.

    2014-01-01

    The nanocrystalline thin films of Sn doped CdSe at different dopants concentration are prepared by thermal evaporation technique on glass substrate at room temperature. The effect of Sn doping on the optical properties of CdSe has been studied. A decrease in band gap value is observed with increase in Sn concentration. Constant photocurrent method (CPM) is used to study the absorption coefficient in the sub band gap region. Urbach energy has been obtained from CPM spectra which are found to increase with amount of Sn dopants. The refractive index data calculated from transmittance is used for the identification of oscillator strength and oscillator energy using single oscillator model which is found to be 7.7 and 2.12 eV, 6.7 and 2.5 eV for CdSe:Sn 1% and CdSe:Sn 5% respectively