WorldWideScience

Sample records for science reference sources

  1. Reference Sources in Chemistry

    OpenAIRE

    Sthapit, Dilip Man

    1995-01-01

    Information plays an important role in the development of every field. Therefore a brief knowledge regarding information sources is necessary to function in any field. There are many information sources about scientific and technical subjects. In this context there are many reference sources in Chemistry too. Chemistry is one important part of the science which deals with the study of the composition of substances and the chemical changes that they undergo. The purpose of this report is...

  2. Genesis Solar Wind Science Canister Components Curated as Potential Solar Wind Collectors and Reference Contamination Sources

    Science.gov (United States)

    Allton, J. H.; Gonzalez, C. P.; Allums, K. K.

    2016-01-01

    The Genesis mission collected solar wind for 27 months at Earth-Sun L1 on both passive and active collectors carried inside of a Science Canister, which was cleaned and assembled in an ISO Class 4 cleanroom prior to launch. The primary passive collectors, 271 individual hexagons and 30 half-hexagons of semiconductor materials, are described in. Since the hard landing reduced the 301 passive collectors to many thousand smaller fragments, characterization and posting in the online catalog remains a work in progress, with about 19% of the total area characterized to date. Other passive collectors, surfaces of opportunity, have been added to the online catalog. For species needing to be concentrated for precise measurement (e.g. oxygen and nitrogen isotopes) an energy-independent parabolic ion mirror focused ions onto a 6.2 cm diameter target. The target materials, as recovered after landing, are described in. The online catalog of these solar wind collectors, a work in progress, can be found at: http://curator.jsc.nasa.gov/gencatalog/index.cfm This paper describes the next step, the cataloging of pieces of the Science Canister, which were surfaces exposed to the solar wind or component materials adjacent to solar wind collectors which may have contributed contamination.

  3. Source Reference File

    Data.gov (United States)

    Social Security Administration — This file contains a national set of names and contact information for doctors, hospitals, clinics, and other facilities (known collectively as sources) from which...

  4. Nuclear science references coding manual

    International Nuclear Information System (INIS)

    Ramavataram, S.; Dunford, C.L.

    1996-08-01

    This manual is intended as a guide to Nuclear Science References (NSR) compilers. The basic conventions followed at the National Nuclear Data Center (NNDC), which are compatible with the maintenance and updating of and retrieval from the Nuclear Science References (NSR) file, are outlined. In Section H, the structure of the NSR file such as the valid record identifiers, record contents, text fields as well as the major TOPICS for which are prepared are enumerated. Relevant comments regarding a new entry into the NSR file, assignment of , generation of and linkage characteristics are also given in Section II. In Section III, a brief definition of the Keyword abstract is given followed by specific examples; for each TOPIC, the criteria for inclusion of an article as an entry into the NSR file as well as coding procedures are described. Authors preparing Keyword abstracts either to be published in a Journal (e.g., Nucl. Phys. A) or to be sent directly to NNDC (e.g., Phys. Rev. C) should follow the illustrations in Section III. The scope of the literature covered at the NNDC, the categorization into Primary and Secondary sources, etc., is discussed in Section IV. Useful information regarding permitted character sets, recommended abbreviations, etc., is given under Section V as Appendices

  5. Canadian Reference Sources 1980--A Selection.

    Science.gov (United States)

    Ryder, Dorothy E.

    1981-01-01

    Provides a bibliography of 52 reference sources and 24 new editions and supplements, excluding annuals. Topics include science and technology, art, history, university courses, regional information, native languages, museums, law, geography, Canadian culture, dissertations, sports, antiques, botany, and a variety of directories. (CHC)

  6. The Spallation Neutron Source RF Reference System

    CERN Document Server

    Piller, Maurice; Crofford, Mark; Doolittle, Lawrence; Ma, Hengjie

    2005-01-01

    The Spallation Neutron Source (SNS) RF Reference System includes the master oscillator (MO), local oscillator(LO) distribution, and Reference RF distribution systems. Coherent low noise Reference RF signals provide the ability to control the phase relationships between the fields in the front-end and linear accelerator (linac) RF cavity structures. The SNS RF Reference System requirements, implementation details, and performance are discussed.

  7. Reference Sources: Little Known to Basic

    Science.gov (United States)

    RQ, 1970

    1970-01-01

    This article lists seventy-eight reference sources, and is divided into the following four sections: (1) Useful But Little-Known Reference Tools by John Fetros, (2) The Statesman's Year-Book by James Becker, (3) Single Volume Scientific Encyclopedias by Jack Clarke and (4) Ten Basic Sources of Business and Economic Statistics by James Woy. (MF)

  8. Archaeology: A Guide to Reference Sources.

    Science.gov (United States)

    Morrison, Doreen, Comp.

    This bibliographic guide lists reference sources available at McGill University for research in prehistory and non-classical archaeology. No exclusively biographical sources have been included, but many of the encyclopedias and handbooks contain biographical information and are annotated accordingly. Titles are listed in the following categories:…

  9. New science at the European Spallation Source

    Energy Technology Data Exchange (ETDEWEB)

    Finney, J L [University Coll., London (United Kingdom). Dept. of Physics and Astronomy

    1996-05-01

    The European Spallation Source is a trans-European project aimed at the ultimate construction of a next-generation pulsed spallation neutron source that will deliver 30 times the beam power of ISIS. The reference design for the proposed source has been set, and work is in progress to develop an updated scientific case for the construction of the source early in the next century. Together with improvements in instrumentation, effective flux gains of over two orders of magnitude are likely in some areas, opening up major new opportunities for the exploitation of neutron studies in fundamental, strategic, and applied science. (author)

  10. Shock wave science and technology reference library

    CERN Document Server

    2009-01-01

    This book is the second of several volumes on solids in the Shock Wave Science and Technology Reference Library. These volumes are primarily concerned with high-pressure shock waves in solid media, including detonation and high-velocity impact and penetration events. Of the four extensive chapters in this volume, the first two describe the reactive behavior of condensed phase explosives, - Condensed-Phase Explosives: Shock Initiation and Detonation Phenomena (SA Sheffield and R Engelke) - First Principles Molecular Simulations of Energetic Materials at High-Pressures (F Zhang, S Alavi, and TK Woo), and the remaining two discuss the inert, mechanical response of solid materials. - Combined Compression and Shear Plane Waves (ZP Tang and JB Aidun), and - Dynamic Fragmentation of Solids (D Grady). All chapters are each self-contained, and can be read independently of each other. They offer a timely reference, for beginners as well as professional scientists and engineers, on the foundations of detonation phenomen...

  11. Reference Data Layers for Earth and Environmental Science: History, Frameworks, Science Needs, Approaches, and New Technologies

    Science.gov (United States)

    Lenhardt, W. C.

    2015-12-01

    Global Mapping Project, Web-enabled Landsat Data (WELD), International Satellite Land Surface Climatology Project (ISLSCP), hydrology, solid earth dynamics, sedimentary geology, climate modeling, integrated assessments and so on all have needs for or have worked to develop consistently integrated data layers for Earth and environmental science. This paper will present an overview of an abstract notion of data layers of this types, what we are referring to as reference data layers for Earth and environmental science, highlight some historical examples, and delve into new approaches. The concept of reference data layers in this context combines data availability, cyberinfrastructure and data science, as well as domain science drivers. We argue that current advances in cyberinfrastructure such as iPython notebooks and integrated science processing environments such as iPlant's Discovery Environment coupled with vast arrays of new data sources warrant another look at the how to create, maintain, and provide reference data layers. The goal is to provide a context for understanding science needs for reference data layers to conduct their research. In addition, to the topics described above this presentation will also outline some of the challenges to and present some ideas for new approaches to addressing these needs. Promoting the idea of reference data layers is relevant to a number of existing related activities such as EarthCube, RDA, ESIP, the nascent NSF Regional Big Data Innovation Hubs and others.

  12. Open Genetic Code: on open source in the life sciences

    OpenAIRE

    Deibel, Eric

    2014-01-01

    The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life sciences refers to access, sharing and collaboration as informatic practices. This includes open source as an experimental model and as a more sophisticated approach of genetic engineering. The first ...

  13. Reference samples for the earth sciences

    Science.gov (United States)

    Flanagan, F.J.

    1974-01-01

    A revised list of reference samples of interest to geoscientists has been extended to include samples for the agronomist, the archaeologist and the environmentalist. In addition to the source from which standard samples may be obtained, references or pertinent notes for some samples are included. The number of rock reference samples is now almost adequate, and the variety of ore samples will soon be sufficient. There are very few samples for microprobe work. Oil shales will become more important because of the outlook for world petroleum resources. The dryland equivalent of a submarine basalt might be useful in studies of sea-floor spreading and of the geochemistry of basalts. The Na- and K-feldspars of BCS (British Chemical Standards-Bureau of Analysed Samples), NBS (National Bureau of Standards), and ANRT (Association Kationale de la Recherche Technique) could serve as trace-element standards if such data were available. Similarly, the present NBS flint and plastic clays, as well as their predecessors, might be useful for archaeological pottery studies. The International Decade for Ocean Exploration may stimulate the preparation of ocean-water standards for trace elements or pollutants and a standard for manganese nodules. ?? 1974.

  14. Shock wave science and technology reference library

    CERN Document Server

    2009-01-01

    This book, as a volume of the Shock Wave Science and Technology Reference Library, is primarily concerned with detonation waves or compression shock waves in reactive heterogeneous media, including mixtures of solid, liquid and gas phases. The topics involve a variety of energy release and control processes in such media - a contemporary research field that has found wide applications in propulsion and power, hazard prevention as well as military engineering. The six extensive chapters contained in this volume are: - Spray Detonation (SB Murray and PA Thibault) - Detonation of Gas-Particle Flow (F Zhang) - Slurry Detonation (DL Frost and F Zhang) - Detonation of Metalized Composite Explosives (MF Gogulya and MA Brazhnikov) - Shock-Induced Solid-Solid Reactions and Detonations (YA Gordopolov, SS Batsanov, and VS Trofimov) - Shock Ignition of Particles (SM Frolov and AV Fedorov) Each chapter is self-contained and can be read independently of the others, though, they are thematically interrelated. They offer a t...

  15. Awareness and perception of reference sources and services by ...

    African Journals Online (AJOL)

    ... e-mail, telephone and social media (e.g. facebook). It was also revealed that 228 (70.45%) have good knowledge of what reference source are; 192 (59.08%) have good understanding of what reference services are, and 241 (74.15%) make use of reference sources in the Federal University of Technology, Owerri library.

  16. Arkansas Reference Sources. Bibliographic Series No. 26.

    Science.gov (United States)

    Ahrens, Joan; Roberts, Joan

    Varied sources for information on Arkansas held by the Arkansas University library are listed. Bibliographies and indexes of Arkansas publications are included, as well as materials dealing with the state's folklore and literature, arts and humanities, government and law, business and economics, social conditions, labor, history and biography,…

  17. The Nuclear Science References (NSR) database and Web Retrieval System

    International Nuclear Information System (INIS)

    Pritychenko, B.; Betak, E.; Kellett, M.A.; Singh, B.; Totans, J.

    2011-01-01

    The Nuclear Science References (NSR) database together with its associated Web interface is the world's only comprehensive source of easily accessible low- and intermediate-energy nuclear physics bibliographic information for more than 200,000 articles since the beginning of nuclear science. The weekly updated NSR database provides essential support for nuclear data evaluation, compilation and research activities. The principles of the database and Web application development and maintenance are described. Examples of nuclear structure, reaction and decay applications are specifically included. The complete NSR database is freely available at the websites of the National Nuclear Data Center (http://www.nndc.bnl.gov/nsr) and the International Atomic Energy Agency (http://www-nds.iaea.org/nsr).

  18. Zotero : a free and open-source reference manager

    DEFF Research Database (Denmark)

    Courraud, Julie

    2014-01-01

    Zotero is a free, open-source reference management program compatible with Linux®, Mac®, and Windows® operating systems. Libraries are backed up online allowing sharing between computers and even multiple users. Zotero makes it easy to keep your reference library organised and ‘clean’. Reference...

  19. Sources of inspiration? Making sense of scientific references in patents

    NARCIS (Netherlands)

    Callaert, Julie; Pellens, Maikel; van Looy, Bart

    2013-01-01

    Scientific references in patent documents can be used as indicators signaling science-technology interactions. Whether they reflect a direct ‘knowledge flow’ from science to technology is subject of debate. Based on 33 interviews with inventors at Belgian firms and knowledge-generating institutes

  20. Digital reference service: trends in academic health science libraries.

    Science.gov (United States)

    Dee, Cheryl R

    2005-01-01

    Two years after the initial 2002 study, a greater number of academic health science libraries are offering digital reference chat services, and this number appears poised to grow in the coming years. This 2004 follow-up study found that 36 (27%) of the academic health science libraries examined provide digital chat reference services; this was an approximately 6% increase over the 25 libraries (21%) located in 2002. Trends in digital reference services in academic health science libraries were derived from the exploration of academic health science library Web sites and from digital correspondence with academic health science library personnel using e-mail and chat. This article presents an overview of the current state of digital reference service in academic health science libraries.

  1. Learning to Provide 3D Virtual Reference: A Library Science Assignment

    Science.gov (United States)

    Johnson, Megan; Purpur, Geraldine; Abbott, Lisa T.

    2009-01-01

    In spring semester 2009, two of the authors taught LIB 5020--Information Sources & Services to graduate library science students at Appalachian State University. The course covers information seeking patterns and provides an overview of reference services. The course is also designed to examine and evaluate library reference materials and…

  2. Shock Wave Science and Technology Reference Library

    CERN Document Server

    2007-01-01

    Shock waves in multiphase flows refers to a rich variety of phenomena of interest to physicists, chemists, and fluid dynamicists, as well as mechanical, biomedical and aeronautical engineers. This volume treats shock and expansion waves in (bullet) complex, bubbly liquids (L van Wijngaarden, Y Tomita, V Kedrinskii) and (bullet) cryogenic liquids (M Murakami) and examines the relationship of shock waves with (bullet) phase transitions (A Guha, CF Delale, G Schnerr, MEH van Dongen) (bullet) induced phase transitions (GEA Meier) as well as their interaction with (bullet) solid foams, textiles, porous and granular media (B Skews, DMJ Smeulders, MEH van Dongen, V Golub, O Mirova) All chapters are self-contained, so they can be read independently, although they are of course thematically interrelated. Taken together, they offer a timely reference on shock waves in multiphase flows, including new viewpoints and burgeoning developments. The book will appeal to beginners as well as professional scientists and engineer...

  3. Teaching Grade Eight Science with Reference to the Science Curriculum

    Directory of Open Access Journals (Sweden)

    Rasel Babu

    2016-08-01

    Full Text Available A mixed methodological approach was used to explore to what extent the science curriculum was being reflected in science teaching-learning of grade VIII students in Bangladesh. 160 students were randomly selected and 10 science teachers were purposively selected as study respondents. Fifteen science lessons were observed. Data were collected via student questionnaires, teacher interviews, and classroom observation checklists. Grade VIII science teaching-learning activities were not conducted according to the instructions of the science curriculum. Most teachers did not adhere to the curriculum and teacher's guide. Teachers mainly depended on lecture methods for delivering lessons. Learning by doing, demonstrating experiments, scientific inquiry, rational thinking, and analysing cause-effect relationships were noticeably absent. Teachers reported huge workloads and a lack of ingredients as reasons for not practising these activities. Teachers did not use teaching aids properly. Science teaching-learning was fully classroom centred, and students were never involved in any creative activities. 

  4. Numeric data services and sources for the general reference librarian

    CERN Document Server

    Kellam, Lynda

    2011-01-01

    The proliferation of online access to social science statistical and numeric data sources, such as the U.S. Census Bureau's American Fact Finder, has lead to an increased interest in supporting these sources in academic libraries. Many large libraries have been able to devote staff to data services for years, and recently smaller academic libraries have recognized the need to provide numeric data services and support. This guidebook serves as a primer to developing and supporting social science statistical and numerical data sources in the academic library. It provides strategies for the estab

  5. Nuclear Science References as a Tool for Data Evaluation

    International Nuclear Information System (INIS)

    Winchell, D.F.

    2005-01-01

    For several decades, the Nuclear Science References database has been maintained as a tool for data evaluators and for the wider pure and applied research community. This contribution will describe the database and recent developments in web-based access

  6. Standard and reference materials for environmental science. Part 1. Technical memo

    Energy Technology Data Exchange (ETDEWEB)

    Cantillo, A.Y.

    1995-11-01

    This is the fourth edition of the catalog of reference materials suited for use in environmental science, originally compiled in 1986 for NOAA, IOC, and UNEP. The catalog lists more than 1200 reference materials from 28 producers and contains information about their proper use, sources, availability, and analyte concentrations. Indices are included for elements, isotopes, and organic compounds, as are cross references to CAS registry numbers, alternate names, and chemical structures of selected organic compounds.

  7. Standard and reference materials for environmental science. Part 2. Technical memo

    Energy Technology Data Exchange (ETDEWEB)

    Cantillo, A.Y.

    1995-11-01

    This is the fourth edition of the catalog of reference materials suited for use in environmental science, originally compiled in 1986 for NOAA, IOC, and UNEP. The catalog lists more than 1200 reference materials from 28 producers and contains information about their proper use, sources, availability, and analyte concentrations. Indices are included for elements, isotopes, and organic compounds, as are cross references to CAS registry numbers, alternate names, and chemical structures of selected organic compounds.

  8. Livermore Accelerator Source for Radionuclide Science (LASRS)

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Scott [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bleuel, Darren [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Johnson, Micah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rusnak, Brian [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Soltz, Ron [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tonchev, Anton [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-05-05

    The Livermore Accelerator Source for Radionuclide Science (LASRS) will generate intense photon and neutron beams to address important gaps in the study of radionuclide science that directly impact Stockpile Stewardship, Nuclear Forensics, and Nuclear Material Detection. The co-location of MeV-scale neutral and photon sources with radiochemical analytics provides a unique facility to meet current and future challenges in nuclear security and nuclear science.

  9. Space Science Reference Guide, 2nd Edition

    Science.gov (United States)

    Dotson, Renee (Editor)

    2003-01-01

    This Edition contains the following reports: GRACE: Gravity Recovery and Climate Experiment; Impact Craters in the Solar System; 1997 Apparition of Comet Hale-Bopp Historical Comet Observations; Baby Stars in Orion Solve Solar System Mystery; The Center of the Galaxy; The First Rock in the Solar System; Fun Times with Cosmic Rays; The Gamma-Ray Burst Next Door; The Genesis Mission: An Overview; The Genesis Solar Wind Sample Return Mission; How to Build a Supermassive Black Hole; Journey to the Center of a Neutron Star; Kepler's Laws of Planetary Motion; The Kuiper Belt and Oort Cloud ; Mapping the Baby Universe; More Hidden Black Hole Dangers; A Polarized Universe; Presolar Grains of Star Dust: Astronomy Studied with Microscopes; Ring Around the Black Hole; Searching Antarctic Ice for Meteorites; The Sun; Astrobiology: The Search for Life in the Universe; Europa and Titan: Oceans in the Outer Solar System?; Rules for Identifying Ancient Life; Inspire ; Remote Sensing; What is the Electromagnetic Spectrum? What is Infrared? How was the Infrared Discovered?; Brief History of Gyroscopes ; Genesis Discovery Mission: Science Canister Processing at JSC; Genesis Solar-Wind Sample Return Mission: The Materials ; ICESat: Ice, Cloud, and Land Elevation Satellite ICESat: Ice, Cloud, and Land; Elevation Satellite ICESat: Ice, Cloud, and Land Elevation Satellite ICESat: Ice, Cloud, and Land Elevation Satellite ICESat: Ice, Cloud, and Land Elevation Satellite Measuring Temperature Reading; The Optical Telescope ; Space Instruments General Considerations; Damage by Impact: The Case at Meteor Crater, Arizona; Mercury Unveiled; New Data, New Ideas, and Lively Debate about Mercury; Origin of the Earth and Moon; Space Weather: The Invisible Foe; Uranus, Neptune, and the Mountains of the Moon; Dirty Ice on Mars; For a Cup of Water on Mars; Life on Mars?; The Martian Interior; Meteorites from Mars, Rocks from Canada; Organic Compounds in Martian Meteorites May be Terrestrial

  10. Musicking Online: Organizing Reference Sources in the Digital Age

    Science.gov (United States)

    Szeto, Kimmy

    2012-01-01

    Online music research resources took center stage at the second plenary session "Wrangling the Information Universe: Moving From Institutional Portals to a Shared Resource for Online Music Sources" held on Friday, February 17, 2012, at the Music Library Association (MLA) 2012 Annual Meeting in Dallas, Texas. The Reference Sources…

  11. High Flux Isotope Reactor cold neutron source reference design concept

    International Nuclear Information System (INIS)

    Selby, D.L.; Lucas, A.T.; Hyman, C.R.

    1998-05-01

    In February 1995, Oak Ridge National Laboratory's (ORNL's) deputy director formed a group to examine the need for upgrades to the High Flux Isotope Reactor (HFIR) system in light of the cancellation of the Advanced neutron Source Project. One of the major findings of this study was that there was an immediate need for the installation of a cold neutron source facility in the HFIR complex. In May 1995, a team was formed to examine the feasibility of retrofitting a liquid hydrogen (LH 2 ) cold source facility into an existing HFIR beam tube. The results of this feasibility study indicated that the most practical location for such a cold source was the HB-4 beam tube. This location provides a potential flux environment higher than the Institut Laue-Langevin (ILL) vertical cold source and maximizes the space available for a future cold neutron guide hall expansion. It was determined that this cold neutron beam would be comparable, in cold neutron brightness, to the best facilities in the world, and a decision was made to complete a preconceptual design study with the intention of proceeding with an activity to install a working LH 2 cold source in the HFIR HB-4 beam tube. During the development of the reference design the liquid hydrogen concept was changed to a supercritical hydrogen system for a number of reasons. This report documents the reference supercritical hydrogen design and its performance. The cold source project has been divided into four phases: (1) preconceptual, (2) conceptual design and testing, (3) detailed design and procurement, and (4) installation and operation. This report marks the conclusion of the conceptual design phase and establishes the baseline reference concept

  12. High Flux Isotope Reactor cold neutron source reference design concept

    Energy Technology Data Exchange (ETDEWEB)

    Selby, D.L.; Lucas, A.T.; Hyman, C.R. [and others

    1998-05-01

    In February 1995, Oak Ridge National Laboratory`s (ORNL`s) deputy director formed a group to examine the need for upgrades to the High Flux Isotope Reactor (HFIR) system in light of the cancellation of the Advanced neutron Source Project. One of the major findings of this study was that there was an immediate need for the installation of a cold neutron source facility in the HFIR complex. In May 1995, a team was formed to examine the feasibility of retrofitting a liquid hydrogen (LH{sub 2}) cold source facility into an existing HFIR beam tube. The results of this feasibility study indicated that the most practical location for such a cold source was the HB-4 beam tube. This location provides a potential flux environment higher than the Institut Laue-Langevin (ILL) vertical cold source and maximizes the space available for a future cold neutron guide hall expansion. It was determined that this cold neutron beam would be comparable, in cold neutron brightness, to the best facilities in the world, and a decision was made to complete a preconceptual design study with the intention of proceeding with an activity to install a working LH{sub 2} cold source in the HFIR HB-4 beam tube. During the development of the reference design the liquid hydrogen concept was changed to a supercritical hydrogen system for a number of reasons. This report documents the reference supercritical hydrogen design and its performance. The cold source project has been divided into four phases: (1) preconceptual, (2) conceptual design and testing, (3) detailed design and procurement, and (4) installation and operation. This report marks the conclusion of the conceptual design phase and establishes the baseline reference concept.

  13. Open Genetic Code: on open source in the life sciences.

    Science.gov (United States)

    Deibel, Eric

    2014-01-01

    The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life sciences refers to access, sharing and collaboration as informatic practices. This includes open source as an experimental model and as a more sophisticated approach of genetic engineering. The first section discusses the greater flexibly in regard of patenting and the relationship to the introduction of open source in the life sciences. The main argument is that the ownership of knowledge in the life sciences should be reconsidered in the context of the centrality of DNA in informatic formats. This is illustrated by discussing a range of examples of open source models. The second part focuses on open source in synthetic biology as exemplary for the re-materialization of information into food, energy, medicine and so forth. The paper ends by raising the question whether another kind of alternative might be possible: one that looks at open source as a model for an alternative to the commodification of life that is understood as an attempt to comprehensively remove the restrictions from the usage of DNA in any of its formats.

  14. Cost Analysis Sources and Documents Data Base Reference Manual (Update)

    Science.gov (United States)

    1989-06-01

    M: Refcrence Manual PRICE H: Training Course Workbook 11. Use in Cost Analysis. Important source of cost estimates for electronic and mechanical...Nature of Data. Contains many microeconomic time series by month or quarter. 5. Level of Detail. Very detailed. 6. Normalization Processes Required...Reference Manual. Moorestown, N.J,: GE Corporation, September 1986. 64. PRICE Training Course Workbook . Moorestown, N.J.: GE Corporation, February 1986

  15. Technology, safety, and costs of decommissioning a reference large irradiator and reference sealed sources

    Energy Technology Data Exchange (ETDEWEB)

    Haffner, D.R.; Villelgas, A.J. [Pacific Northwest Lab., Richland, WA (United States)

    1996-01-01

    This report contains the results of a study sponsored by the US Nuclear Regulatory Commission (NRC) to examine the decommissioning of large radioactive irradiators and their respective facilities, and a broad spectrum of sealed radioactive sources and their respective devices. Conceptual decommissioning activities are identified, and the technology, safety, and costs (in early 1993 dollars) associated with decommissioning the reference large irradiator and sealed source facilities are evaluated. The study provides bases and background data for possible future NRC rulemaking regarding decommissioning, for evaluation of the reasonableness of planned decommissioning actions, and for determining if adequate funds are reserved by the licensees for decommissioning of their large irradiator or sealed source facilities. Another purpose of this study is to provide background and information to assist licensees in planning and carrying out the decommissioning of their sealed radioactive sources and respective facilities.

  16. Technology, safety, and costs of decommissioning a reference large irradiator and reference sealed sources

    International Nuclear Information System (INIS)

    Haffner, D.R.; Villelgas, A.J.

    1996-01-01

    This report contains the results of a study sponsored by the US Nuclear Regulatory Commission (NRC) to examine the decommissioning of large radioactive irradiators and their respective facilities, and a broad spectrum of sealed radioactive sources and their respective devices. Conceptual decommissioning activities are identified, and the technology, safety, and costs (in early 1993 dollars) associated with decommissioning the reference large irradiator and sealed source facilities are evaluated. The study provides bases and background data for possible future NRC rulemaking regarding decommissioning, for evaluation of the reasonableness of planned decommissioning actions, and for determining if adequate funds are reserved by the licensees for decommissioning of their large irradiator or sealed source facilities. Another purpose of this study is to provide background and information to assist licensees in planning and carrying out the decommissioning of their sealed radioactive sources and respective facilities

  17. The Supercontinuum Laser Source Fundamentals with Updated References

    CERN Document Server

    Alfano, Robert R

    2006-01-01

    Photonics and nonlinear optics are important areas of science, engineering and technology. One of the most important ultrafast nonlinear optical processes is the supercontinuum (SC) – the production of intense white light pulses covering: uv, visible, NIR, MIR, and IR. It is produced using ultrashort laser pulses (ps/fs) to produce the ultrabroad band of frequencies. This book covers the fundamental principles and surveys research of current thinkers and experts in the field with updated references of the key breakthroughs over the past decade and a half. The application of SC are time-resolved pump-SC probe absorption and excitation spectroscopy for chemistry, biology and physics fundamental processes; optical coherence tomography; ultrashort pulse generation in femtosecond and attosecond regions; frequency clocks; phase stabilization; optical communication; atmospheric science; lightning control; optical medical imaging; biological cell imaging; and metrology standards.

  18. Reference volumetric samples of gamma-spectroscopic sources

    International Nuclear Information System (INIS)

    Taskaev, E.; Taskaeva, M.; Grigorov, T.

    1993-01-01

    The purpose of this investigation is to determine the requirements for matrices of reference volumetric radiation sources necessary for detector calibration. The first stage of this determination consists in analysing some available organic and nonorganic materials. Different sorts of food, grass, plastics, minerals and building materials have been considered, taking into account the various procedures of their processing (grinding, screening, homogenizing) and their properties (hygroscopy, storage life, resistance to oxidation during gamma sterilization). The procedures of source processing, sample preparation, matrix irradiation and homogenization have been determined. A rotation homogenizing device has been elaborated enabling to homogenize the matrix activity irrespective of the vessel geometry. 33 standard volumetric radioactive sources have been prepared: 14 - on organic matrix and 19 - on nonorganic matrix. (author)

  19. Standard and reference materials for marine science. Third edition. Technical memo

    International Nuclear Information System (INIS)

    Cantillo, A.Y.

    1992-08-01

    The third edition of the catalog of reference materials suited for use in marine science, originally compiled in 1986 for NOAA, IOC, and UNEP. The catalog lists close to 2,000 reference materials from sixteen producers and contains information about their proper use, sources, availability, and analyte concentrations. Indices are included for elements, isotopes, and organic compounds, as are cross references to CAS registry numbers, alternate names, and chemical structures of selected organic compounds. The catalog is being published independently by both NOAA and IOC/UNEP and is available from NOAA/NOS/ORCA in electronic form

  20. Science reference room index to physical, chemical and other property data

    CERN Document Server

    This nice reference guide from Arizona State University's Noble Science and Engineering Library amounts to "an index to selected library and internet resources that contain chemical, physical, thermodynamic, mechanical, toxicological, and safety data with a list of suggested standard reference sources that may be found in most technical libraries, this reference guide goes on to include a vast reservoir of alphabetically listed library books and Internet sites where a user may locate specific information. From Abrasion Resistance to Yield Strength data, this index is quite comprehensive.

  1. Reference sources for radionuclide calibrations in nuclear programmes

    International Nuclear Information System (INIS)

    Almeida, M.C.M. de; Delgado, J.U.; Poledna, R.; Silva, R.L. da; Oliveira, E.M. de; Di Prinzio, M.A.R.

    2009-01-01

    The radionuclide metrology laboratories aim to provide radioactive standards for detector calibrations in nuclear safety areas. To produce the reference sources to be furnished to users the following standards of 57 Co, 60 Co, 133 Ba, 241 Am, 152 Eu and 166 Ho are commonly used. In this work was made a verifying of the uncertainties obtained for the two methods: comparative (sample-standards) and efficiency curve. The total uncertainties obtained by sample-standard method varied from 0.4 to 1.2% (k = 1). The results using efficiency curve method to the same radioisotopes and same conditions are between 0.9 to 2.2% (k = 1). (author)

  2. Development of Reference Source Terms for EU-APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, ByungIl; Lee, Chonghui; Lee, Dongsu; Ko, Heejin; Kang, Sangho [KEPCO Engineering and Construction Co. Inc., Yongin (Korea, Republic of)

    2014-05-15

    These source terms are developed for the typical U. S. NPP and do not reflect the design characteristics of EU-APR1400 (1,400 MWe PWR) which will be applied for the EUR certification in European countries. The process of developing the RST for EU-APR1400 is to undergo a similar process that NUREG-1465 had gone through when it came out with its proposed source terms. The purpose of this study is to develop the EU-APR1400 design-specific RST complied with the EUR. The Large LOCA is the reference equence used in the NUREG-1465 evaluation, whereas the EUAPR1400 risk-significant sequences are dominated by small LOCA and non-LOCA sequences. Moreover, when considering the EU-APR1400 has many design features to mitigate the consequences of severe accident phenomena, it is not surprising that the aspects of both release fractions and durations are distinctly different from NUREG-1465. This RST will be continuously updated to reflect to the design features of EU-APR1400, and then, be used as the reference for design purposes such as criteria satisfaction of radioactivity releases, equipment survivability, control room habitability for severe accident, and so on.

  3. Adaptive Sliding Mode Control of MEMS AC Voltage Reference Source

    Directory of Open Access Journals (Sweden)

    Ehsan Ranjbar

    2017-01-01

    Full Text Available The accuracy of physical parameters of a tunable MEMS capacitor, as the major part of MEMS AC voltage reference, is of great importance to achieve an accurate output voltage free of the malfunctioning noise and disturbance. Even though strenuous endeavors are made to fabricate MEMS tunable capacitors with desiderated accurate physical characteristics and ameliorate exactness of physical parameters’ values, parametric uncertainties ineluctably emerge in fabrication process attributable to imperfections in micromachining process. First off, this paper considers applying an adaptive sliding mode controller design in the MEMS AC voltage reference source so that it is capable of giving off a well-regulated output voltage in defiance of jumbling parametric uncertainties in the plant dynamics and also aggravating external disturbance imposed on the system. Secondly, it puts an investigatory comparison with the designed model reference adaptive controller and the pole-placement state feedback one into one’s prospective. Not only does the tuned adaptive sliding mode controller show remarkable robustness against slow parameter variation and external disturbance being compared to the pole-placement state feedback one, but also it immensely gets robust against the external disturbance in comparison with the conventional adaptive controller. The simulation results are promising.

  4. Reference sources for radionuclide calibrations in nuclear programmes

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, M.C.M. de; Delgado, J.U.; Poledna, R.; Silva, R.L. da; Oliveira, E.M. de; Di Prinzio, M.A.R., E-mail: marcandida@yahoo.com.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab. Nacional de Metrologia das Radiacoes Ionizantes (LNMRI)

    2009-07-01

    The radionuclide metrology laboratories aim to provide radioactive standards for detector calibrations in nuclear safety areas. To produce the reference sources to be furnished to users the following standards of {sup 57}Co, {sup 60}Co, {sup 133}Ba, {sup 241}Am, {sup 152}Eu and {sup 166}Ho are commonly used. In this work was made a verifying of the uncertainties obtained for the two methods: comparative (sample-standards) and efficiency curve. The total uncertainties obtained by sample-standard method varied from 0.4 to 1.2% (k = 1). The results using efficiency curve method to the same radioisotopes and same conditions are between 0.9 to 2.2% (k = 1). (author)

  5. The US EPA reference dose for methylmercury: sources of uncertainty

    International Nuclear Information System (INIS)

    Rice, D.C.

    2004-01-01

    The US Environmental Protection Agency (EPA) derived a reference dose for methylmercury in 2001, based on an extensive analysis by the National Research Council (NRC) of the National Academy of Sciences. The NRC performed benchmark dose analysis on a number of endpoints from three longitudinal prospective studies: the Seychelles Islands, the Faroe Islands, and the New Zealand studies. Adverse effects were reported in the latter two studies, but not in the Seychelles study. The NRC also performed an integrative analysis of all three studies. Dose conversion from cord blood or maternal hair mercury concentration was performed by EPA using a one-compartment pharmacokinetic model. A total uncertainty factor of 10 was applied for intrahuman pharmacokinetic and pharmacodynamic variability. There are numerous decisions made by the NRC/EPA that could greatly affect the value of the reference dose (RfD). Some of these include the choice of a linear model for the relationship between mercury body burden and neuropsychological performance, the choice of values of P 0 and the benchmark response, the use of the 'critical study/critical endpoint' approach in the interpretation of the maternal body burden that corresponds to the RfD, the use of central tendencies in a one-compartment pharmacokinetic model rather than the inclusion of the distributions of variables for the population of reproductive-age women, the assumption of unity for the ratio of fetal cord blood to maternal blood methylmercury concentrations, the choice of a total of 10 as an uncertainty factor, and the lack of dose-response analysis for other health effects such as cardiovascular disease. In addition, it may be argued that derivation of a RfD for methylmercury is inappropriate, given that there does not appear to be a threshold for adverse neuropsychological effects based on available data

  6. Evaluation of the uniformity of wide circular reference source and application of correction factors

    International Nuclear Information System (INIS)

    Silva Junior, I.A.; Xavier, M.; Siqueira, P.T.D.; Sordi, G.A.A.; Potiens, M.P.A.

    2017-01-01

    In this work the uniformity of wide circular reference sources is evaluated. This kind of reference source is still widely used in Brazil. In previous works wide rectangular reference sources were analyzed and it was shown the importance of the application of correction factors in calibration procedures of radiation monitors. Now a transposition of the methods used formerly is performed, evaluating the uniformities of circular reference sources and calculating the associated correction factors. (author)

  7. Need for organic reference materials in marine science

    Energy Technology Data Exchange (ETDEWEB)

    Wells, D.E.

    1988-12-01

    The reference materials (RMs) available for organic trace analysis (OTA) and the development programmes of the RM producers are reviewed. The need for a wider range of determinants, matrices and classes of RMs, particularly the more widespread use of laboratory RMs (LRMs) is discussed. Additional certified RMs should include phenolic surfactant degradation products, chlorophenolics from the wood and paper industries, and organobromines from fire retardants. RMs as molecular markers of geogenic, pyrogenic and biogenic sources; chlorophylls and xanthophylls as a measure of marine productivity and natural shellfish toxins are proposed.

  8. New sources and instrumentation for neutron science

    Energy Technology Data Exchange (ETDEWEB)

    Gil, Alina, E-mail: a.gil@ajd.czest.pl [Faculty of Mathematical and Natural Sciences, JD University, Al. Armii Krajowej 13/15, 42-200 Czestochowa (Poland)

    2011-04-01

    Neutron-scattering research has a lot to do with our everyday lives. Things like medicine, food, electronics, cars and airplanes have all been improved by neutron-scattering research. Neutron research also helps scientists improve materials used in a multitude of different products, such as high-temperature superconductors, powerful lightweight magnets, stronger, lighter plastic products etc. Neutron scattering is one of the most effective ways to obtain information on both, the structure and the dynamics of condensed matter. Most of the world's neutron sources were built decades ago, and although the uses and demand for neutrons have increased throughout the years, few new sources have been built. The new construction, accelerator-based neutron source, the spallation source will provide the most intense pulsed neutron beams in the world for scientific research and industrial development. In this paper it will be described what neutrons are and what unique properties make them useful for science, how spallation source is designed to produce neutron beams and the experimental instruments that will use those beams. Finally, it will be described how past neutron research has affected our everyday lives and what we might expect from the most exciting future applications.

  9. New sources and instrumentation for neutron science

    International Nuclear Information System (INIS)

    Gil, Alina

    2011-01-01

    Neutron-scattering research has a lot to do with our everyday lives. Things like medicine, food, electronics, cars and airplanes have all been improved by neutron-scattering research. Neutron research also helps scientists improve materials used in a multitude of different products, such as high-temperature superconductors, powerful lightweight magnets, stronger, lighter plastic products etc. Neutron scattering is one of the most effective ways to obtain information on both, the structure and the dynamics of condensed matter. Most of the world's neutron sources were built decades ago, and although the uses and demand for neutrons have increased throughout the years, few new sources have been built. The new construction, accelerator-based neutron source, the spallation source will provide the most intense pulsed neutron beams in the world for scientific research and industrial development. In this paper it will be described what neutrons are and what unique properties make them useful for science, how spallation source is designed to produce neutron beams and the experimental instruments that will use those beams. Finally, it will be described how past neutron research has affected our everyday lives and what we might expect from the most exciting future applications.

  10. Science and Technology of Future Light Sources

    International Nuclear Information System (INIS)

    Dierker, S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, G.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

    2008-01-01

    Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee (1). These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

  11. Science and Technology of Future Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, Janos; Long, Danielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z. -X.; Schenoy, Gopal; Schoenlein, Bob; Shen, Qun; Stephenson, Brian; Stohr, Joachim; Zholents, Alexander

    2009-01-28

    Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

  12. Science and Technology of Future Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Dierker,S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, g.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

    2008-12-01

    Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

  13. Molecular environmental science and synchrotron radiation sources

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.E. Jr. [Stanford Univ., CA (United States)

    1995-12-31

    Molecular environmental science is a relatively new field but focuses on the chemical and physical forms of toxic and/or radioactive contaminants in soils, sediments, man-made waste forms, natural waters, and the atmosphere; their possible reactions with inorganic and organic compounds, plants, and organisms in the environment; and the molecular-level factors that control their toxicity, bioavailability, and transport. The chemical speciation of a contaminant is a major factor in determining its behavior in the environment, and synchrotron-based X-ray absorption fine structure (XAFS) spectroscopy is one of the spectroscopies of choice to quantitatively determine speciation of heavy metal contaminants in situ without selective extraction or other sample treatment. The use of high-flux insertion device beam lines at synchrotron sources and multi-element array detectors has permitted XAFS studies of metals such as Se and As in natural soils at concentration levels as low as 50 ppm. The X-ray absorption near edge structure of these metals is particularly useful in determining their oxidation state. Examples of such studies will be presented, and new insertion device beam lines under development at SSRL and the Advanced Photon Source for molecular environmental science applications will be discussed.

  14. Evaluation of Skin Surface as an Alternative Source of Reference DNA Samples: A Pilot Study.

    Science.gov (United States)

    Albujja, Mohammed H; Bin Dukhyil, Abdul Aziz; Chaudhary, Abdul Rauf; Kassab, Ahmed Ch; Refaat, Ahmed M; Babu, Saranya Ramesh; Okla, Mohammad K; Kumar, Sachil

    2018-01-01

    An acceptable area for collecting DNA reference sample is a part of the forensic DNA analysis development. The aim of this study was to evaluate skin surface cells (SSC) as an alternate source of reference DNA sample. From each volunteer (n = 10), six samples from skin surface areas (forearm and fingertips) and two traditional samples (blood and buccal cells) were collected. Genomic DNA was extracted and quantified then genotyped using standard techniques. The highest DNA concentration of SSC samples was collected using the tape/forearm method of collection (2.1 ng/μL). Cotton swabs moistened with ethanol yielded higher quantities of DNA than swabs moistened with salicylic acid, and it gave the highest percentage of full STR profiles (97%). This study supports the use of SSC as a noninvasive sampling technique and as a extremely useful source of DNA reference samples among certain cultures where the use of buccal swabs can be considered socially unacceptable. © 2017 American Academy of Forensic Sciences.

  15. Simulation of wind wave growth with reference source functions

    Science.gov (United States)

    Badulin, Sergei I.; Zakharov, Vladimir E.; Pushkarev, Andrei N.

    2013-04-01

    We present results of extensive simulations of wind wave growth with the so-called reference source function in the right-hand side of the Hasselmann equation written as follows First, we use Webb's algorithm [8] for calculating the exact nonlinear transfer function Snl. Second, we consider a family of wind input functions in accordance with recent consideration [9] ( )s S = ?(k)N , ?(k) = ? ? ?- f (?). in k 0 ?0 in (2) Function fin(?) describes dependence on angle ?. Parameters in (2) are tunable and determine magnitude (parameters ?0, ?0) and wave growth rate s [9]. Exponent s plays a key role in this study being responsible for reference scenarios of wave growth: s = 4-3 gives linear growth of wave momentum, s = 2 - linear growth of wave energy and s = 8-3 - constant rate of wave action growth. Note, the values are close to ones of conventional parameterizations of wave growth rates (e.g. s = 1 for [7] and s = 2 for [5]). Dissipation function Sdiss is chosen as one providing the Phillips spectrum E(?) ~ ?5 at high frequency range [3] (parameter ?diss fixes a dissipation scale of wind waves) Sdiss = Cdissμ4w?N (k)θ(? - ?diss) (3) Here frequency-dependent wave steepness μ2w = E(?,?)?5-g2 makes this function to be heavily nonlinear and provides a remarkable property of stationary solutions at high frequencies: the dissipation coefficient Cdiss should keep certain value to provide the observed power-law tails close to the Phillips spectrum E(?) ~ ?-5. Our recent estimates [3] give Cdiss ? 2.0. The Hasselmann equation (1) with the new functions Sin, Sdiss (2,3) has a family of self-similar solutions of the same form as previously studied models [1,3,9] and proposes a solid basis for further theoretical and numerical study of wave evolution under action of all the physical mechanisms: wind input, wave dissipation and nonlinear transfer. Simulations of duration- and fetch-limited wind wave growth have been carried out within the above model setup to check its

  16. Identification of radioactive sources and devices. Reference manual

    International Nuclear Information System (INIS)

    2007-01-01

    This publication is intended to be a basic guide and not a comprehensive tool kit to identify and provide detailed emergency handling instructions for radioactive sources, devices and transport containers. In addition, this publication helps to identify sources and highlight the risks they present, and provides information on appropriate action. It is a small but significant step in the international community's continuing efforts to strengthen control of radioactive sources and nuclear material, increase safety and security, and thereby make the benefits of radioactive sources ever more broadly accessible. This publication was partly funded through the Nuclear Security Fund established under the Nuclear Security Plan

  17. Photon Science at Modern Light Sources

    Science.gov (United States)

    Arthur, John

    2009-12-01

    energy resolution (˜100 eV for solid state detectors), or very poor angular acceptance (10-3 sr or worse for grating and crystal analyzer detectors). Photon detectors at synchrotron light sources can be presented with very high signal count rates. At the new FEL sources, this issue will be especially acute, since each sub-picosecond pulse will deliver the flux produced in one second by a synchrotron. This invites the use of multiple small detectors to spread the load. The ideal energy-resolving detector for x-ray science at modern light sources would combine eV-level energy resolution, 100-μm pixel size, and a low per-pixel cost allowing several megapixels to be deployed.

  18. ShockWave science and technology reference library

    CERN Document Server

    2007-01-01

    This book is the first of several volumes on solids in the Shock Wave Science and Technology Reference Library. These volumes are primarily concerned with high-pressure shock waves in solid media, including detonation, high-velocity impact, and penetration. Of the eight chapters in this volume three chapters survey recent, exciting experimental advances in - ultra-short shock dynamics at the atomic and molecular scale (D.S. More, S.D. Mcgrane, and D.J. Funk), - Z accelerator for ICE and Shock compression (M.D. Knudson), and - failure waves in glass and ceramics (S.J. Bless and N.S. Brar). The subsequent four chapters are foundational, and cover the subjects of - equation of state (R. Menikoff), - elastic-plastic shock waves (R. Menikoff), - continuum plasticity (R. M. Brannon), and - numerical methods (D. J. Benson). The last chapter, but not the least, describes a tour de force illustration of today’s computing power in - modeling heterogeneous reactive solids at the grain scale (M.R. Baer). All chapters a...

  19. Shakespeare: A Student's Guide to Basic Reference Sources.

    Science.gov (United States)

    Claener, Anne, Comp.

    Basic and standard reference materials dealing with William Shakespeare are listed in this bibliography. Annotated entries are grouped under the following headings: concordances, dictionaries, encyclopedias and handbooks, and bibliographies. The section on bibliographies is further divided into lists of editions of Shakespeare's work, general…

  20. The Web as a Reference Tool: Comparisons with Traditional Sources.

    Science.gov (United States)

    Janes, Joseph; McClure, Charles R.

    1999-01-01

    This preliminary study suggests that the same level of timeliness and accuracy can be obtained for answers to reference questions using resources in freely available World Wide Web sites as with traditional print-based resources. Discusses implications for library collection development, new models of consortia, training needs, and costing and…

  1. Sources and performance criteria of uncertainty of reference measurement procedures.

    Science.gov (United States)

    Mosca, Andrea; Paleari, Renata

    2018-05-29

    This article wants to focus on the today available Reference Measurement Procedures (RMPs) for the determination of various analytes in Laboratory Medicine and the possible tools to evaluate their performance in the laboratories who are currently using them. A brief review on the RMPs has been performed by investigating the Joint Committee for Traceability in Laboratory Medicine (JCTLM) database. In order to evaluate their performances, we have checked the organization of three international ring trials, i.e. those regularly performed by the IFCC External Quality assessment scheme for Reference Laboratories in Laboratory Medicine (RELA), by the Center for Disease Control and Prevention (CDC) cholesterol network and by the IFCC Network for HbA 1c . Several RMPs are available through the JCTLM database, but the best way to collect information about the RMPs and their uncertainties is to look at the reference measurement service providers (RMS). This part of the database and the background on how to listed in the database is very helpful for the assessment of expanded uncertainty (MU) and performance in general of RMPs. Worldwide, 17 RMS are listed in the database, and for most of the measurands more than one RMS is able to run the relative RMPs, with similar expanded uncertainties. As an example, for a-amylase, 4 SP offer their services with MU between 1.6 and 3.3%. In other cases (such as total cholesterol, the U may span over a broader range, i.e. from 0.02 to 3.6%). With regard to the performance evaluation, the approach is often heterogenous, and it is difficult to compare the performance of laboratories running the same RMP for the same measurand if involved in more than one EQAS. The reference measurement services have been created to help laboratory professionals and manufacturers to implement the correct metrological traceability, and the JCTLM database is the only correct way to retrieve all the necessary important information to this end. Copyright © 2018

  2. Timing reference generators and chopper controllers for neutron sources

    International Nuclear Information System (INIS)

    Nelson, R.; Merl, R.; Rose, C.

    2001-01-01

    Due to AC-power-grid frequency fluctuations, the designers for accelerator-based spallation-neutron facilities have worked to optimize the competing and contrasting demands of accelerator and neutron chopper performance. Powerful new simulation techniques have enabled the modeling of the timing systems that integrate chopper controllers and chopper hardware. For the first time, we are able to quantitatively access the tradeoffs between these two constraints and design or upgrade a facility to optimize total system performance. Thus, at LANSCE, we now operate multiple chopper systems and the accelerator as simple slaves to a single master-timing-reference generator. For the SNS we recommend a similar system that is somewhat less tightly coupled to the power grid. (author)

  3. Reference - PLACE | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...ailable. Data file File name: place_reference.zip File URL: ftp://ftp.biosciencedbc.jp/archive/place/LATEST/...ber About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Reference - PLACE | LSDB Archive ...

  4. On truth and reference in postmodern science | Ruttkamp | South ...

    African Journals Online (AJOL)

    If the defenders of typical postmodern accounts of science (and their less extreme social-constructivist partners) are at one end of the scale in current philosophy of science, who shall we place at the other end? Old-style metaphysical realists? Neo-neo-positivists? ... Are the choices concerning realist issues as simple as ...

  5. Open Genetic Code : On open source in the life sciences

    NARCIS (Netherlands)

    Deibel, E.

    2014-01-01

    The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life

  6. Eliminating traditional reference services in an academic health sciences library: a case study

    Science.gov (United States)

    Schulte, Stephanie J

    2011-01-01

    Question: How were traditional librarian reference desk services successfully eliminated at one health sciences library? Setting: The analysis was done at an academic health sciences library at a major research university. Method: A gap analysis was performed, evaluating changes in the first eleven months through analysis of reference transaction and instructional session data. Main Results: Substantial increases were seen in the overall number of specialized reference transactions and those conducted by librarians lasting more than thirty minutes. The number of reference transactions overall increased after implementing the new model. Several new small-scale instructional initiatives began, though perhaps not directly related to the new model. Conclusion: Traditional reference desk services were eliminated at one academic health sciences library without negative impact on reference and instructional statistics. Eliminating ties to the confines of the physical library due to staffing reference desk hours removed one significant barrier to a more proactive liaison program. PMID:22022221

  7. Directory of Soviet Officials: Science and Education: A Reference Aid

    Science.gov (United States)

    1989-05-01

    Armenian SSR Academy of Sciences. Established in 1956. the observatory studies the structure of the galaxy, non-stable stars and nebulae. radioastronomy ...of solids, electron optics, decametric radioastronomy , and long distance radio communications.) Director Shestopalov, Viktor Petrovich, D.PM.S

  8. Science reporting in Accra, Ghana: sources, barriers and motivational factors.

    Science.gov (United States)

    Appiah, Bernard; Gastel, Barbara; Burdine, James N; Russell, Leon H

    2015-01-01

    In Ghana, as in many other developing countries, most science reporting is done by general reporters. However, few studies have investigated science reporting in such a situation. To understand better the dynamics of science reporting in such context, we surveyed 151 general reporters in Ghana. Respondents' demographic characteristics resembled those found in studies elsewhere. Respondents perceived health professionals and scientists as very important sources of information for reporting science. There was an inverse correlation between journalism experience and the number of science feature stories reported in the past 12 months (p=.017). Most respondents indicated that science journalism training would motivate them to report science more. Likewise, most reported that easier access to research findings would do so. We identify characteristics of reporters, media, scientific, and training institutions that are important influences of Ghanaian reporters' coverage of science. We provide recommendations for advancing science reporting in Ghana. © The Author(s) 2014.

  9. Science reporting in Accra, Ghana: Sources, barriers and motivational factors

    Science.gov (United States)

    Gastel, Barbara; Burdine, James N.; Russell, Leon H.

    2014-01-01

    In Ghana, as in many other developing countries, most science reporting is done by general reporters. However, few studies have investigated science reporting in such a situation. To understand better the dynamics of science reporting in such context, we surveyed 151 general reporters in Ghana. Respondents’ demographic characteristics resembled those found in studies elsewhere. Respondents perceived health professionals and scientists as very important sources of information for reporting science. There was an inverse correlation between journalism experience and the number of science feature stories reported in the past 12 months (p = .017). Most respondents indicated that science journalism training would motivate them to report science more. Likewise, most reported that easier access to research findings would do so. We identify characteristics of reporters, media, scientific, and training institutions that are important influences of Ghanaian reporters’ coverage of science. We provide recommendations for advancing science reporting in Ghana. PMID:25193967

  10. Digital chat reference in health science libraries: challenges in initiating a new service.

    Science.gov (United States)

    Dee, Cheryl R; Newhouse, Joshua D

    2005-01-01

    Digital reference service adds a valuable new dimension to health science reference services, but the road to implementation can present questions that require carefully considered decisions. This article incorporates suggestions from the published literature, provides tips from interviews with practicing academic health science librarians, and reports on data from students' exploration of academic health science library Web sites' digital reference services. The goal of this study is to provide guidelines to plan new services, assess user needs, and select software, and to showcase potential benefits of collaboration and proactive and user-friendly marketing. In addition, tips for successful operation and evaluation of services are discussed.

  11. Close connections between open science and open-source software

    Directory of Open Access Journals (Sweden)

    YouHua Chen

    2014-09-01

    Full Text Available Open science is increasingly gaining attention in recent years. In this mini-review, we briefly discuss and summarize the reasons of introducing open science into academic publications for scientists. We argue that open-source software (like R and Python software can be the universal and important platforms for doing open science because of their appealing features: open source, easy-reading document, commonly used in various scientific disciplines like statistics, chemistry and biology. At last, the challenges and future perspectives of performing open science are discussed.

  12. Laser Lights or Dim Bulbs? Evaluating Reference Librarians' Use of Electronic Sources.

    Science.gov (United States)

    Welch, Jeanie M.

    1999-01-01

    Discusses the evaluation of academic library reference librarians' effectiveness in providing services to patrons using electronic sources based on experiences at the University of North Carolina at Charlotte. Topics include core technical competencies for subject specialists and reference desk service; the Internet; and methods of evaluation.…

  13. The Source Book of Marine Sciences.

    Science.gov (United States)

    Beakley, John C.; And Others

    Included is a teachers resource collection of 42 marine science activities for high school students. Both the biological and the physical factors of the marine environment are investigated, including the study of tides, local currents, microscope measuring, beaches, turbidity, sea water solids, pH, and salinity, marine bacteriology, microbiology,…

  14. TORCH Computational Reference Kernels - A Testbed for Computer Science Research

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Alex; Williams, Samuel Webb; Madduri, Kamesh; Ibrahim, Khaled; Bailey, David H.; Demmel, James W.; Strohmaier, Erich

    2010-12-02

    For decades, computer scientists have sought guidance on how to evolve architectures, languages, and programming models in order to improve application performance, efficiency, and productivity. Unfortunately, without overarching advice about future directions in these areas, individual guidance is inferred from the existing software/hardware ecosystem, and each discipline often conducts their research independently assuming all other technologies remain fixed. In today's rapidly evolving world of on-chip parallelism, isolated and iterative improvements to performance may miss superior solutions in the same way gradient descent optimization techniques may get stuck in local minima. To combat this, we present TORCH: A Testbed for Optimization ResearCH. These computational reference kernels define the core problems of interest in scientific computing without mandating a specific language, algorithm, programming model, or implementation. To compliment the kernel (problem) definitions, we provide a set of algorithmically-expressed verification tests that can be used to verify a hardware/software co-designed solution produces an acceptable answer. Finally, to provide some illumination as to how researchers have implemented solutions to these problems in the past, we provide a set of reference implementations in C and MATLAB.

  15. Evaluation of the homogeneity of reference flat sources used in calibration of surface contamination monitors

    International Nuclear Information System (INIS)

    Silva Junior, I.A.; Xavier, M.; Siqueira, P.T.D.; Potiens, M.P.A.

    2014-01-01

    The aim of this study was to re-evaluate the uniformity of the wide area reference sources of the Calibration Laboratory of Instruments (LCI-IPEN) used in the calibration of surface contamination monitors, according the recommendations of the ISO 8769 standard and the NRPB. In this work used six wide area reference sources of 150 cm 2 of 241 Am, 14 C, 36 Cl, 137 Cs, 90 Sr+ 90 Y and 99 Tc with reference dates between 1996 and 1997 and three sources of 100 cm 2 of 14 C, 137 Cs and 60 Co were used with reference dates 2007. Measurements were performed with a radiation monitor of the Thermo, model FH40GX with a pancake probe, model FHZ732GM. We also made several models on paper with the objective of define each measurement position and an aluminum plate with a square hole (6.25 cm 2 ) in its center, allowing the passage of the radiation only through the hole. Each wide area reference source was positioned in setup and measurements were performed in order to cover the entire surface of the source. The values of the uniformity obtained partially confirm previous data obtained in another study conducted by LCI-IPEN, showing that some wide area reference sources 150 cm 2 in disagree with ISO 8769. In the former work, just the source of 241 Am (7.3%) was within the range specified by the standard, now have sources of 241 Am (5.7%), 137 Cs (8.8%), 90 Sr+ 9 '0Y (8, 8%) and 99 Tc (9.2%) with values within the specified uniformity. The sources of 14 C (53.3%) and 36 Cl (16.6%) were outside the specified. The wide area reference sources of 100 cm 2 , show disagreement in values of uniformity of the sources 14 C (46.7%) and 60 Co (10.4%). The values of the uniformity of the wide area reference sources show that some fonts can not be used in calibrations, because not in accordance with the value of uniformity specified in ISO 8769:2010, this is a conditions to believe a laboratory according to ISO 17025, show the laboratory performs its services with a high quality. The

  16. Efficient Location of Research Reference Sources in the Field of Dance.

    Science.gov (United States)

    Kissinger, Pat; Jay, Danielle

    More than 45 basic dance reference research sources that would be useful to students, scholars, teachers, historians, and therapists are discussed in this bibliographic essay. Aspects of dance covered include choreography, criticism, teaching principles, aesthetic theory, dance therapy, and history. Sources are grouped by type: dictionaries and…

  17. 78 FR 21008 - Publication of Inflation Adjustment Factor, Nonconventional Source Fuel Credit, and Reference...

    Science.gov (United States)

    2013-04-08

    ... products) for calendar year 2012. DATES: The 2012 inflation adjustment factor, nonconventional source fuel... DEPARTMENT OF THE TREASURY Internal Revenue Service Publication of Inflation Adjustment Factor, Nonconventional Source Fuel Credit, and Reference Price for Calendar Year 2012 AGENCY: Internal Revenue Service...

  18. 76 FR 19524 - Publication of Inflation Adjustment Factor, Nonconventional Source Fuel Credit, and Reference...

    Science.gov (United States)

    2011-04-07

    ... products) for calendar year 2010. DATES: The 2010 inflation adjustment factor, nonconventional source fuel... DEPARTMENT OF THE TREASURY Internal Revenue Service Publication of Inflation Adjustment Factor, Nonconventional Source Fuel Credit, and Reference Price for Calendar Year 2010 AGENCY: Internal Revenue Service...

  19. 77 FR 22067 - Publication of Inflation Adjustment Factor, Nonconventional Source Fuel Credit, and Reference...

    Science.gov (United States)

    2012-04-12

    ... calendar year 2011. DATES: The 2011 inflation adjustment factor and nonconventional source fuel credit... DEPARTMENT OF THE TREASURY Internal Revenue Service Publication of Inflation Adjustment Factor, Nonconventional Source Fuel Credit, and Reference Price for Calendar Year 2011 AGENCY: Internal Revenue Service...

  20. Large Synoptic Survey Telescope: From Science Drivers to Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Ivezic, Z.; Axelrod, T.; Brandt, W.N.; Burke, D.L.; Claver, C.F.; Connolly, A.; Cook, K.H.; Gee, P.; Gilmore, D.K.; Jacoby, S.H.; Jones, R.L.; Kahn, S.M.; Kantor, J.P.; Krabbendam, V.; Lupton, R.H.; Monet, D.G.; Pinto, P.A.; Saha, A.; Schalk, T.L.; Schneider, D.P.; Strauss, Michael A.; /Washington U., Seattle, Astron. Dept. /LSST Corp. /Penn State U., Astron. Astrophys. /KIPAC, Menlo Park /NOAO, Tucson /LLNL, Livermore /UC, Davis /Princeton U., Astrophys. Sci. Dept. /Naval Observ., Flagstaff /Arizona U., Astron. Dept. - Steward Observ. /UC, Santa Cruz /Harvard U. /Johns Hopkins U. /Illinois U., Urbana

    2011-10-14

    In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST). LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg{sup 2} field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg{sup 2} with {delta} < +34.5{sup o}, and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the

  1. Large Synoptic Survey Telescope: From science drivers to reference design

    Directory of Open Access Journals (Sweden)

    Ivezić Ž.

    2008-01-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next- generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective primary mirror, a 9.6 deg2 field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg2 with δ < +34.5◦ , and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep- wide-fast survey mode which will observe a 20,000 deg2 region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the LSST

  2. Large Synoptic Survey Telescope: From Science Drivers To Reference Design

    Directory of Open Access Journals (Sweden)

    Ivezić, Ž.

    2008-06-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pach'{o}n in Northern Chile. The current baseline design, with an 8.4, m (6.5, m effective primary mirror, a 9.6 deg$^2$ field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg$^2$ with $delta<+34.5^circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg$^2$ region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10\\% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We

  3. Optical Spectra of Candidate International Celestial Reference Frame (ICRF) Flat-spectrum Radio Sources. III

    Energy Technology Data Exchange (ETDEWEB)

    Titov, O.; Stanford, Laura M. [Geoscience Australia, P.O. Box 378, Canberra, ACT 2601 (Australia); Pursimo, T. [Nordic Optical Telescope, Nordic Optical Telescope Apartado 474E-38700 Santa Cruz de La Palma, Santa Cruz de Tenerife (Spain); Johnston, Helen M.; Hunstead, Richard W. [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia); Jauncey, David L. [CSIRO Astronomy and Space Science, ATNF and Mount Stromlo Observatory, Cotter Road, Weston, ACT 2611 (Australia); Zenere, Katrina A., E-mail: oleg.titov@ga.gov.au [School of Physics, University of Sydney, NSW 2006 (Australia)

    2017-04-01

    In extending our spectroscopic program, which targets sources drawn from the International Celestial Reference Frame (ICRF) Catalog, we have obtained spectra for ∼160 compact, flat-spectrum radio sources and determined redshifts for 112 quasars and radio galaxies. A further 14 sources with featureless spectra have been classified as BL Lac objects. Spectra were obtained at three telescopes: the 3.58 m European Southern Observatory New Technology Telescope, and the two 8.2 m Gemini telescopes in Hawaii and Chile. While most of the sources are powerful quasars, a significant fraction of radio galaxies is also included from the list of non-defining ICRF radio sources.

  4. A Survey of the Usability of Digital Reference Services on Academic Health Science Library Web Sites

    Science.gov (United States)

    Dee, Cheryl; Allen, Maryellen

    2006-01-01

    Reference interactions with patrons in a digital library environment using digital reference services (DRS) has become widespread. However, such services in many libraries appear to be underutilized. A study surveying the ease and convenience of such services for patrons in over 100 academic health science library Web sites suggests that…

  5. Minority Preservice Teachers' Conceptions of Teaching Science: Sources of Science Teaching Strategies

    Science.gov (United States)

    Subramaniam, Karthigeyan

    2013-01-01

    This study explores five minority preservice teachers' conceptions of teaching science and identifies the sources of their strategies for helping students learn science. Perspectives from the literature on conceptions of teaching science and on the role constructs used to describe and distinguish minority preservice teachers from their mainstream…

  6. Constructive Use of Authoritative Sources in Science Meaning-Making

    Science.gov (United States)

    Yeo, Jennifer; Tan, Seng Chee

    2010-01-01

    Researchers are skeptical about the role of authoritative sources of information in a constructivist learning environment for fear of usurping students' critical thinking. Taking a social semiotics perspective in this study, authoritative sources are regarded as inscriptions of cultural artifacts, and science learning involves meaning-making of…

  7. Motion Pictures: An Update Survey of Reference Sources, 1982-1988.

    Science.gov (United States)

    Block, Eleanor S.

    1989-01-01

    Surveys motion picture reference materials published since 1982. Materials are presented in the following categories: encyclopedic works about films, filmmakers and the industry; film criticism; people on the screen and behind it; horror, science fiction and Westerns; literature on film; catalogs and filmographies; and special collections. (70…

  8. The Materials Science beamline upgrade at the Swiss Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Willmott, P. R., E-mail: philip.willmott@psi.ch; Meister, D.; Leake, S. J.; Lange, M.; Bergamaschi, A. [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); and others

    2013-07-16

    The wiggler X-ray source of the Materials Science beamline at the Swiss Light Source has been replaced with a 14 mm-period cryogenically cooled in-vacuum undulator. In order to best exploit the increased brilliance of this new source, the entire front-end and optics have been redesigned. The Materials Science beamline at the Swiss Light Source has been operational since 2001. In late 2010, the original wiggler source was replaced with a novel insertion device, which allows unprecedented access to high photon energies from an undulator installed in a medium-energy storage ring. In order to best exploit the increased brilliance of this new source, the entire front-end and optics had to be redesigned. In this work, the upgrade of the beamline is described in detail. The tone is didactic, from which it is hoped the reader can adapt the concepts and ideas to his or her needs.

  9. Spallation Neutron Sources For Science And Technology

    International Nuclear Information System (INIS)

    Comsan, M.N.H.

    2011-01-01

    Spallation Neutron Facilities Increasing interest has been noticed in spallation neutron sources (SNS) during the past 20 years. The system includes high current proton accelerator in the GeV region and spallation heavy metal target in the Hg-Bi region. Among high flux currently operating SNSs are: ISIS in UK (1985), SINQ in Switzerland (1996), JSNS in Japan (2008), and SNS in USA (2010). Under construction is the European spallation source (ESS) in Sweden (to be operational in 2020). The intense neutron beams provided by SNSs have the advantage of being of non-reactor origin, are of continuous (SINQ) or pulsed nature. Combined with state-of-the-art neutron instrumentation, they have a diverse potential for both scientific research and diverse applications. Why Neutrons? Neutrons have wavelengths comparable to interatomic spacings (1-5 A) Neutrons have energies comparable to structural and magnetic excitations (1-100 meV) Neutrons are deeply penetrating (bulk samples can be studied) Neutrons are scattered with a strength that varies from element to element (and isotope to isotope) Neutrons have a magnetic moment (study of magnetic materials) Neutrons interact only weakly with matter (theory is easy) Neutron scattering is therefore an ideal probe of magnetic and atomic structures and excitations Neutron Producing Reactions Several nuclear reactions are capable of producing neutrons. However the use of protons minimises the energetic cost of the neutrons produced solid state physics and astrophysics Inelastic neutron scattering

  10. "OZONE SOURCE APPORTIONMENT IN CMAQ' | Science ...

    Science.gov (United States)

    Ozone source attribution has been used to support various policy purposes including interstate transport (Cross State Air Pollution Rule) by U.S. EPA and ozone nonattainment area designations by State agencies. Common scientific applications include tracking intercontinental transport of ozone and ozone precursors and delineating anthropogenic and non-anthropogenic contribution to ozone in North America. As in the public release due in September 2013, CMAQ’s Integrated Source Apportionment Method (ISAM) attributes PM EC/OC, sulfate, nitrate, ammonium, ozone and its precursors NOx and VOC, to sectors/regions of users’ interest. Although the peroxide-to-nitric acid productions ratio has been the most common indicator to distinguish NOx-limited ozone production from VOC-limited one, other indicators are implemented in addition to allowing for an ensemble decision based on a total of 9 available indicator ratios. Moreover, an alternative approach of ozone attribution based on the idea of chemical sensitivity in a linearized system that has formed the basis of chemical treatment in forward DDM/backward adjoint tools has been implemented in CMAQ. This method does not require categorization into either ozone regime. In this study, ISAM will simulate the 2010 North America ozone using all of the above gas-phase attribution methods. The results are to be compared with zero-out difference out of those sectors in the host model runs. In addition, ozone contribution wil

  11. Preserving the Integrity of Citations and References by All Stakeholders of Science Communication.

    Science.gov (United States)

    Gasparyan, Armen Yuri; Yessirkepov, Marlen; Voronov, Alexander A; Gerasimov, Alexey N; Kostyukova, Elena I; Kitas, George D

    2015-11-01

    Citations to scholarly items are building bricks for multidisciplinary science communication. Citation analyses are currently influencing individual career advancement and ranking of academic and research institutions worldwide. This article overviews the involvement of scientific authors, reviewers, editors, publishers, indexers, and learned associations in the citing and referencing to preserve the integrity of science communication. Authors are responsible for thorough bibliographic searches to select relevant references for their articles, comprehend main points, and cite them in an ethical way. Reviewers and editors may perform additional searches and recommend missing essential references. Publishers, in turn, are in a position to instruct their authors over the citations and references, provide tools for validation of references, and open access to bibliographies. Publicly available reference lists bear important information about the novelty and relatedness of the scholarly items with the published literature. Few editorial associations have dealt with the issue of citations and properly managed references. As a prime example, the International Committee of Medical Journal Editors (ICMJE) issued in December 2014 an updated set of recommendations on the need for citing primary literature and avoiding unethical references, which are applicable to the global scientific community. With the exponential growth of literature and related references, it is critically important to define functions of all stakeholders of science communication in curbing the issue of irrational and unethical citations and thereby improve the quality and indexability of scholarly journals.

  12. Preserving the Integrity of Citations and References by All Stakeholders of Science Communication

    Science.gov (United States)

    Yessirkepov, Marlen; Voronov, Alexander A.; Gerasimov, Alexey N.; Kostyukova, Elena I.; Kitas, George D.

    2015-01-01

    Citations to scholarly items are building bricks for multidisciplinary science communication. Citation analyses are currently influencing individual career advancement and ranking of academic and research institutions worldwide. This article overviews the involvement of scientific authors, reviewers, editors, publishers, indexers, and learned associations in the citing and referencing to preserve the integrity of science communication. Authors are responsible for thorough bibliographic searches to select relevant references for their articles, comprehend main points, and cite them in an ethical way. Reviewers and editors may perform additional searches and recommend missing essential references. Publishers, in turn, are in a position to instruct their authors over the citations and references, provide tools for validation of references, and open access to bibliographies. Publicly available reference lists bear important information about the novelty and relatedness of the scholarly items with the published literature. Few editorial associations have dealt with the issue of citations and properly managed references. As a prime example, the International Committee of Medical Journal Editors (ICMJE) issued in December 2014 an updated set of recommendations on the need for citing primary literature and avoiding unethical references, which are applicable to the global scientific community. With the exponential growth of literature and related references, it is critically important to define functions of all stakeholders of science communication in curbing the issue of irrational and unethical citations and thereby improve the quality and indexability of scholarly journals. PMID:26538996

  13. A 6.13MeV gamma reference source, measurement of the emission rate

    International Nuclear Information System (INIS)

    Robert, Andre; Blondel, Maurice; Morel, Jean; Thomas, Claude.

    1977-08-01

    A 6.13MeV γ reference source has been produced by using 13 C(α, nγ) 16 O reaction occurring in an intimate 13 C and 238 Pu mixture. With two walls made leak proof this standard source is easy handled and convenient to the calibration of detectors. The 6.13MeV gamma ray is emitted without Doeppler effect, is measured with an uncertainty of 6% by three independent methods [fr

  14. Advances and synergy of high pressure sciences at synchrotron sources

    International Nuclear Information System (INIS)

    Liu, H.; Ehm, L.; Duffy, T.; Crichton, W.; Aoki, K.

    2009-01-01

    Introductory overview to the special issue papers on high-pressure sciences and synchrotron radiation. High-pressure research in geosciences, materials science and condensed matter physics at synchrotron sources is experiencing growth and development through synergistic efforts around the world. A series of high-pressure science workshops were organized in 2008 to highlight these developments. One of these workshops, on 'Advances in high-pressure science using synchrotron X-rays', was held at the National Synchrotron Light Source (NSLS), Brookhaven National Laboratory, USA, on 4 October 2008. This workshop was organized in honour of Drs Jingzhu Hu and Quanzhong Guo in celebration of their retirement after up to 18 years of dedicated service to the high-pressure community as beamline scientists at X17 of NSLS. Following this celebration of the often unheralded role of the beamline scientist, a special issue of the Journal of Synchrotron Radiation on Advances and Synergy of High-Pressure Sciences at Synchrotron Sources was proposed, and we were pleased to invite contributions from colleagues who participated in the workshop as well as others who are making similar efforts at synchrotron sources worldwide.

  15. Factors affecting quality for beta dose rate measurements using ISO 6980 series I reference sources

    Energy Technology Data Exchange (ETDEWEB)

    Burns, R.E. Jr.; O`Brien, J.M. Jr. [Atlan-Tech, Rosewll, GA (United States)

    1993-12-31

    Atlan-Tech, Inc. has performed several calibrations of ISO 6980 Series 1 reference beta sources over the past two to three years. There were many problems encountered in attempting to compare the results of these calibrations with those from other laboratories, indicating the need for more standardization in the methodology employed for the measurement of the absorbed dose rate from ISO 6980 Series 1 reference beta sources. This document describes some of the problems encountered in attempting to intercompare results of beta dose-rate measurements. It proposes some solutions in an attempt to open a dialogue among facilities using reference beta standards for the purpose of promoting better measurement quality assurance through data intercomparison.

  16. Factors affecting quality for beta dose rate measurements using ISO 6980 series I reference sources

    International Nuclear Information System (INIS)

    Burns, R.E. Jr.; O'Brien, J.M. Jr.

    1993-01-01

    Atlan-Tech, Inc. has performed several calibrations of ISO 6980 Series 1 reference beta sources over the past two to three years. There were many problems encountered in attempting to compare the results of these calibrations with those from other laboratories, indicating the need for more standardization in the methodology employed for the measurement of the absorbed dose rate from ISO 6980 Series 1 reference beta sources. This document describes some of the problems encountered in attempting to intercompare results of beta dose-rate measurements. It proposes some solutions in an attempt to open a dialogue among facilities using reference beta standards for the purpose of promoting better measurement quality assurance through data intercomparison

  17. Embracing Open Source for NASA's Earth Science Data Systems

    Science.gov (United States)

    Baynes, Katie; Pilone, Dan; Boller, Ryan; Meyer, David; Murphy, Kevin

    2017-01-01

    The overarching purpose of NASAs Earth Science program is to develop a scientific understanding of Earth as a system. Scientific knowledge is most robust and actionable when resulting from transparent, traceable, and reproducible methods. Reproducibility includes open access to the data as well as the software used to arrive at results. Additionally, software that is custom-developed for NASA should be open to the greatest degree possible, to enable re-use across Federal agencies, reduce overall costs to the government, remove barriers to innovation, and promote consistency through the use of uniform standards. Finally, Open Source Software (OSS) practices facilitate collaboration between agencies and the private sector. To best meet these ends, NASAs Earth Science Division promotes the full and open sharing of not only all data, metadata, products, information, documentation, models, images, and research results but also the source code used to generate, manipulate and analyze them. This talk focuses on the challenges to open sourcing NASA developed software within ESD and the growing pains associated with establishing policies running the gamut of tracking issues, properly documenting build processes, engaging the open source community, maintaining internal compliance, and accepting contributions from external sources. This talk also covers the adoption of existing open source technologies and standards to enhance our custom solutions and our contributions back to the community. Finally, we will be introducing the most recent OSS contributions from NASA Earth Science program and promoting these projects for wider community review and adoption.

  18. A philosophical examination of Mead's pragmatist constructivism as a referent for adult science education

    Science.gov (United States)

    Furbish, Dean Russel

    The purpose of this study is to examine pragmatist constructivism as a science education referent for adult learners. Specifically, this study seeks to determine whether George Herbert Mead's doctrine, which conflates pragmatist learning theory and philosophy of natural science, might facilitate (a) scientific concept acquisition, (b) learning scientific methods, and (c) preparation of learners for careers in science and science-related areas. A philosophical examination of Mead's doctrine in light of these three criteria has determined that pragmatist constructivism is not a viable science education referent for adult learners. Mead's pragmatist constructivism does not portray scientific knowledge or scientific methods as they are understood by practicing scientists themselves, that is, according to scientific realism. Thus, employment of pragmatist constructivism does not adequately prepare future practitioners for careers in science-related areas. Mead's metaphysics does not allow him to commit to the existence of the unobservable objects of science such as molecular cellulose or mosquito-borne malarial parasites. Mead's anti-realist metaphysics also affects his conception of scientific methods. Because Mead does not commit existentially to the unobservable objects of realist science, Mead's science does not seek to determine what causal role if any the hypothetical objects that scientists routinely posit while theorizing might play in observable phenomena. Instead, constructivist pragmatism promotes subjective epistemology and instrumental methods. The implication for learning science is that students are encouraged to derive scientific concepts based on a combination of personal experience and personal meaningfulness. Contrary to pragmatist constructivism, however, scientific concepts do not arise inductively from subjective experience driven by personal interests. The broader implication of this study for adult education is that the philosophically laden

  19. Equine Science. Instructor Guide [and] Student Reference. Volume 27, Number 4 [and] Volume 27, Number 5.

    Science.gov (United States)

    Leffert, Kenneth L.; And Others

    This instructor guide and the corresponding student reference contain 10 lessons to enhance an Agricultural Science I course for grade 9. The lessons cover the following topics: introduction, psychology and handling, conformation and selection, genetics and reproduction, herd health, hoof care, nutrition, equipment and facilities, handling horses,…

  20. Crop Science. Instructor Guide [and] Student Reference. Volume 24, Numbers 5 and 6.

    Science.gov (United States)

    Humphrey, John Kevin

    This document consists of two separately published guides for a course on crop science: an instructor's guide and a student's reference manual. Each part contains nine lessons on the following topics: (1) economic importance of crops; (2) crop uses (products and byproducts); (3) plant and seed identification; (4) certified seed and variety…

  1. Plant Science. Instructor Guide [and] Student Reference. Volume 24, Numbers 3 and 4.

    Science.gov (United States)

    Humphrey, John Kevin

    This document consists of two separately published guides for a course on plant science: an instructor's guide and a student's reference manual. Each part consists of eight lessons and cover the following topics: (1) importance of plants; (2) classification of plants; (3) plant growth factors; (4) weeds, diseases, insects; (5) germination; (6)…

  2. Benchmarking Reference Desk Service in Academic Health Science Libraries: A Preliminary Survey.

    Science.gov (United States)

    Robbins, Kathryn; Daniels, Kathleen

    2001-01-01

    This preliminary study was designed to benchmark patron perceptions of reference desk services at academic health science libraries, using a standard questionnaire. Responses were compared to determine the library that provided the highest-quality service overall and along five service dimensions. All libraries were rated very favorably, but none…

  3. Status of ion sources at National Institute of Radiological Sciences.

    Science.gov (United States)

    Kitagawa, A; Fujita, T; Goto, A; Hattori, T; Hamano, T; Hojo, S; Honma, T; Imaseki, H; Katagiri, K; Muramatsu, M; Sakamoto, Y; Sekiguchi, M; Suda, M; Sugiura, A; Suya, N

    2012-02-01

    The National Institute of Radiological Sciences (NIRS) maintains various ion accelerators in order to study the effects of radiation of the human body and medical uses of radiation. Two electrostatic tandem accelerators and three cyclotrons delivered by commercial companies have offered various life science tools; these include proton-induced x-ray emission analysis (PIXE), micro beam irradiation, neutron exposure, and radioisotope tracers and probes. A duoplasmatron, a multicusp ion source, a penning ion source (PIG), and an electron cyclotron resonance ion source (ECRIS) are in operation for these purposes. The Heavy-Ion Medical Accelerator in Chiba (HIMAC) is an accelerator complex for heavy-ion radiotherapy, fully developed by NIRS. HIMAC is utilized not only for daily treatment with the carbon beam but also for fundamental experiments. Several ECRISs and a PIG at HIMAC satisfy various research and clinical requirements.

  4. Synchrotron light sources: A powerful tool for science and technology

    International Nuclear Information System (INIS)

    Schlachter, F.; Robinson, A.

    1996-01-01

    A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, poweful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

  5. Synchrotron light sources: A powerful tool for science and technology

    International Nuclear Information System (INIS)

    Schlachter, F.; Robinson, A.

    1996-01-01

    A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, powerful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

  6. OPTICAL SPECTRA OF CANDIDATE INTERNATIONAL CELESTIAL REFERENCE FRAME (ICRF) FLAT-SPECTRUM RADIO SOURCES

    Energy Technology Data Exchange (ETDEWEB)

    Titov, O.; Stanford, Laura M. [Geoscience Australia, P.O. Box 378, Canberra, ACT 2601 (Australia); Johnston, Helen M.; Hunstead, Richard W. [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia); Pursimo, T. [Nordic Optical Telescope, Nordic Optical Telescope Apartado 474E-38700 Santa Cruz de La Palma, Santa Cruz de Tenerife (Spain); Jauncey, David L. [CSIRO Astronomy and Space Science, ATNF and Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Maslennikov, K. [Central Astronomical Observatory at Pulkovo, Pulkovskoye Shosse, 65/1, 196140, St. Petersburg (Russian Federation); Boldycheva, A., E-mail: oleg.titov@ga.gov.au [Ioffe Physical Technical Institute, 26 Polytekhnicheskaya, St. Petersburg, 194021 (Russian Federation)

    2013-07-01

    Continuing our program of spectroscopic observations of International Celestial Reference Frame (ICRF) sources, we present redshifts for 120 quasars and radio galaxies. Data were obtained with five telescopes: the 3.58 m European Southern Observatory New Technology Telescope, the two 8.2 m Gemini telescopes, the 2.5 m Nordic Optical Telescope (NOT), and the 6.0 m Big Azimuthal Telescope of the Special Astrophysical Observatory in Russia. The targets were selected from the International VLBI Service for Geodesy and Astrometry candidate International Celestial Reference Catalog which forms part of an observational very long baseline interferometry (VLBI) program to strengthen the celestial reference frame. We obtained spectra of the potential optical counterparts of more than 150 compact flat-spectrum radio sources, and measured redshifts of 120 emission-line objects, together with 19 BL Lac objects. These identifications add significantly to the precise radio-optical frame tie to be undertaken by Gaia, due to be launched in 2013, and to the existing data available for analyzing source proper motions over the celestial sphere. We show that the distribution of redshifts for ICRF sources is consistent with the much larger sample drawn from Faint Images of the Radio Sky at Twenty cm (FIRST) and Sloan Digital Sky Survey, implying that the ultra-compact VLBI sources are not distinguished from the overall radio-loud quasar population. In addition, we obtained NOT spectra for five radio sources from the FIRST and NRAO VLA Sky Survey catalogs, selected on the basis of their red colors, which yielded three quasars with z > 4.

  7. Reference-Frame-Independent and Measurement-Device-Independent Quantum Key Distribution Using One Single Source

    Science.gov (United States)

    Li, Qian; Zhu, Changhua; Ma, Shuquan; Wei, Kejin; Pei, Changxing

    2018-04-01

    Measurement-device-independent quantum key distribution (MDI-QKD) is immune to all detector side-channel attacks. However, practical implementations of MDI-QKD, which require two-photon interferences from separated independent single-photon sources and a nontrivial reference alignment procedure, are still challenging with current technologies. Here, we propose a scheme that significantly reduces the experimental complexity of two-photon interferences and eliminates reference frame alignment by the combination of plug-and-play and reference frame independent MDI-QKD. Simulation results show that the secure communication distance can be up to 219 km in the finite-data case and the scheme has good potential for practical MDI-QKD systems.

  8. GOSH! A roadmap for open-source science hardware

    CERN Multimedia

    Stefania Pandolfi

    2016-01-01

    The goal of the Gathering for Open Science Hardware (GOSH! 2016), held from 2 to 5 March 2016 at IdeaSquare, was to lay the foundations of the open-source hardware for science movement.   The participants in the GOSH! 2016 meeting gathered in IdeaSquare. (Image: GOSH Community) “Despite advances in technology, many scientific innovations are held back because of a lack of affordable and customisable hardware,” says François Grey, a professor at the University of Geneva and coordinator of Citizen Cyberlab – a partnership between CERN, the UN Institute for Training and Research and the University of Geneva – which co-organised the GOSH! 2016 workshop. “This scarcity of accessible science hardware is particularly obstructive for citizen science groups and humanitarian organisations that don’t have the same economic means as a well-funded institution.” Instead, open sourcing science hardware co...

  9. Comparison between two methodologies for uniformity correction of extensive reference sources

    International Nuclear Information System (INIS)

    Junior, Iremar Alves S.; Siqueira, Paulo de T.D.; Vivolo, Vitor; Potiens, Maria da Penha A.; Nascimento, Eduardo

    2016-01-01

    This article presents the procedures to obtain the uniformity correction factors for extensive reference sources proposed by two different methodologies. The first methodology is presented by the Good Practice Guide of Nº 14 of the NPL, which provides a numerical correction. The second one uses the radiation transport code, MCNP5, to obtain the correction factor. Both methods retrieve very similar corrections factor values, with a maximum deviation of 0.24%. (author)

  10. Sources of student engagement in Introductory Physics for Life Sciences

    Science.gov (United States)

    Geller, Benjamin D.; Turpen, Chandra; Crouch, Catherine H.

    2018-06-01

    We explore the sources of student engagement with curricular content in an Introductory Physics for Life Science (IPLS) course at Swarthmore College. Do IPLS students find some life-science contexts more interesting than others, and, if so, what are the sources of these differences? We draw on three sources of student data to answer this question: (1) quantitative survey data illustrating how interested students were in particular contexts from the curriculum, (2) qualitative survey data in which students describe the source of their interest in these particular contexts, and (3) interview data in which students reflect on the contexts that were and were not of interest to them. We find that examples that make interdisciplinary connections with students' other coursework in biology and chemistry, and examples that make connections to what students perceive to be the "real world," are particularly effective at fostering interest. More generally, students describe being deeply engaged with contexts that foster a sense of coherence or have personal meaning to them. We identify various "engagement pathways" by which different life-science students engage with IPLS content, and suggest that a curriculum needs to be flexible enough to facilitate these different pathways.

  11. Comparison of the Equine Reference Sequence with Its Sanger Source Data and New Illumina Reads.

    Directory of Open Access Journals (Sweden)

    Jovan Rebolledo-Mendez

    Full Text Available The reference assembly for the domestic horse, EquCab2, published in 2009, was built using approximately 30 million Sanger reads from a Thoroughbred mare named Twilight. Contiguity in the assembly was facilitated using nearly 315 thousand BAC end sequences from Twilight's half brother Bravo. Since then, it has served as the foundation for many genome-wide analyses that include not only the modern horse, but ancient horses and other equid species as well. As data mapped to this reference has accumulated, consistent variation between mapped datasets and the reference, in terms of regions with no read coverage, single nucleotide variants, and small insertions/deletions have become apparent. In many cases, it is not clear whether these differences are the result of true sequence variation between the research subjects' and Twilight's genome or due to errors in the reference. EquCab2 is regarded as "The Twilight Assembly." The objective of this study was to identify inconsistencies between the EquCab2 assembly and the source Twilight Sanger data used to build it. To that end, the original Sanger and BAC end reads have been mapped back to this equine reference and assessed with the addition of approximately 40X coverage of new Illumina Paired-End sequence data. The resulting mapped datasets identify those regions with low Sanger read coverage, as well as variation in genomic content that is not consistent with either the original Twilight Sanger data or the new genomic sequence data generated from Twilight on the Illumina platform. As the haploid EquCab2 reference assembly was created using Sanger reads derived largely from a single individual, the vast majority of variation detected in a mapped dataset comprised of those same Sanger reads should be heterozygous. In contrast, homozygous variations would represent either errors in the reference or contributions from Bravo's BAC end sequences. Our analysis identifies 720,843 homozygous discrepancies

  12. Small neutron sources as centers for innovation and science

    International Nuclear Information System (INIS)

    Baxter, D.V.

    2009-01-01

    The education and training of the next generation of scientists who will form the user base for the Spallation Neutron Source (SNS) remains a significant issue for the future success of this national facility. These scientists will be drawn from a wide variety of disciplines (physics, chemistry, biology, and engineering) and therefore the development of an effective interdisciplinary training program represents a significant challenge. In addition, effective test facilities to develop the full potential of pulsed neutron sources for science do not exist. Each of these problems represents a significant hurdle for the future health of neutron science in this country. An essential part of the solution to both problems is to get neutron sources of useful intensities into the hands of researchers and students at universities, where faculty can teach students about neutron production and the utility of neutrons for solving scientific problems. Due to a combination of developments in proton accelerator technology, neutron optics, cold neutron moderators, computer technology, and small-angle neutron scattering (SANS) instrumentation, it is now technically possible and cost effective to construct a pulsed cold neutron source suitable for use in a university setting and devoted to studies of nano structures in the fields of materials science, polymers, microemulsions, and biology. Such a source, based on (p,n) reactions in light nuclei induced by a few MeV pulsed proton beam coupled to a cold neutron moderator, would also be ideal for the study of a number of technical issues which are essential for the development of neutron science such as cold and perhaps ultracold neutron moderators, neutron optical devices, neutron detector technology, and transparent DAQ/user interfaces. At the Indiana University Cyclotron Facility (IUCF) we possess almost all of the required instrumentation and expertise to efficiently launch the first serious attempt to develop an intense pulsed cold

  13. Communicating Science to Impact Learning? A Phenomenological Inquiry into 4th and 5th Graders' Perceptions of Science Information Sources

    Science.gov (United States)

    Gelmez Burakgazi, Sevinc; Yildirim, Ali; Weeth Feinstein, Noah

    2016-04-01

    Rooted in science education and science communication studies, this study examines 4th and 5th grade students' perceptions of science information sources (SIS) and their use in communicating science to students. It combines situated learning theory with uses and gratifications theory in a qualitative phenomenological analysis. Data were gathered through classroom observations and interviews in four Turkish elementary schools. Focus group interviews with 47 students and individual interviews with 17 teachers and 10 parents were conducted. Participants identified a wide range of SIS, including TV, magazines, newspapers, internet, peers, teachers, families, science centers/museums, science exhibitions, textbooks, science books, and science camps. Students reported using various SIS in school-based and non-school contexts to satisfy their cognitive, affective, personal, and social integrative needs. SIS were used for science courses, homework/project assignments, examination/test preparations, and individual science-related research. Students assessed SIS in terms of the perceived accessibility of the sources, the quality of the content, and the content presentation. In particular, some sources such as teachers, families, TV, science magazines, textbooks, and science centers/museums ("directive sources") predictably led students to other sources such as teachers, families, internet, and science books ("directed sources"). A small number of sources crossed context boundaries, being useful in both school and out. Results shed light on the connection between science education and science communication in terms of promoting science learning.

  14. Integrating Free and Open Source Solutions into Geospatial Science Education

    Directory of Open Access Journals (Sweden)

    Vaclav Petras

    2015-06-01

    Full Text Available While free and open source software becomes increasingly important in geospatial research and industry, open science perspectives are generally less reflected in universities’ educational programs. We present an example of how free and open source software can be incorporated into geospatial education to promote open and reproducible science. Since 2008 graduate students at North Carolina State University have the opportunity to take a course on geospatial modeling and analysis that is taught with both proprietary and free and open source software. In this course, students perform geospatial tasks simultaneously in the proprietary package ArcGIS and the free and open source package GRASS GIS. By ensuring that students learn to distinguish between geospatial concepts and software specifics, students become more flexible and stronger spatial thinkers when choosing solutions for their independent work in the future. We also discuss ways to continually update and improve our publicly available teaching materials for reuse by teachers, self-learners and other members of the GIS community. Only when free and open source software is fully integrated into geospatial education, we will be able to encourage a culture of openness and, thus, enable greater reproducibility in research and development applications.

  15. Environmental Science Program at the Advanced Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Nico, Peter; A; Anastasio, Cort; Dodge, Cleveland; Fendorf, Scott; Francis, A.J.; Hubbard, Susan; Shuh, David; Tomutsa, Liviu; Tufano, Kate; Tyliszczak, Tolek; Werner, Michelle; Williams, Ken

    2006-04-05

    The Advanced Light Source (ALS) has a variety of capabilities that are applicable to very different types of environmental systems. Shown are the basic descriptions of four of the approximately 35 beam lines at the ALS. The complimentary capabilities of these four beam lines allow for investigations that range from a spatial scale of a few nanometers to several millimeters. The Environmental Science Program at the Advanced Light Source seeks to promote and assist environmental research, particularly on the four beam lines described in this report. Several short examples of the types of research conducted on these beam lines are also described.

  16. Life Sciences Space Station planning document: A reference payload for the Life Sciences Research Facility

    Science.gov (United States)

    1986-01-01

    The Space Station, projected for construction in the early 1990s, will be an orbiting, low-gravity, permanently manned facility providing unprecedented opportunities for scientific research. Facilities for Life Sciences research will include a pressurized research laboratory, attached payloads, and platforms which will allow investigators to perform experiments in the crucial areas of Space Medicine, Space Biology, Exobiology, Biospherics and Controlled Ecological Life Support System (CELSS). These studies are designed to determine the consequences of long-term exposure to space conditions, with particular emphasis on assuring the permanent presence of humans in space. The applied and basic research to be performed, using humans, animals, and plants, will increase our understanding of the effects of the space environment on basic life processes. Facilities being planned for remote observations from platforms and attached payloads of biologically important elements and compounds in space and on other planets (Exobiology) will permit exploration of the relationship between the evolution of life and the universe. Space-based, global scale observations of terrestrial biology (Biospherics) will provide data critical for understanding and ultimately managing changes in the Earth's ecosystem. The life sciences community is encouraged to participate in the research potential the Space Station facilities will make possible. This document provides the range and scope of typical life sciences experiments which could be performed within a pressurized laboratory module on Space Station.

  17. [Comment on the misappropriation of bibliographical references in science. The example of anti-aging medicine].

    Science.gov (United States)

    Cogan, E

    2015-01-01

    This work constitutes a argued analysis of the publication of the article of Hertoghe et al. "Anti aging medicine, a science based, essential medicine " whose full and unreviewed publication was forced in the framework of the Belgian law on the right of reply to an earlier publication entitled " Anti-Aging Medicine: Science or Marketing? ". We confirm the absence of scientific evidence on the effectiveness of hormonal treatments used in this approach by highlighting the different techniques allowing doctors who promote this approach to make believe in their effectiveness. This is clearly to mix in one sentence established truths and unproven facts, use references inappropriately especially by misappropriation of studies on groups of patients with hormone deficiency in order to justify treatment in healthy subjects, to ignore recent references undermining ancient literature, to betray the authors' conclusions. Our critical analysis is also considering compliance with the guidelines for integrity in scientific publications.

  18. Fourier transform holography with extended references using a coherent ultra-broadband light source.

    Science.gov (United States)

    Tenner, Vasco T; Eikema, Kjeld S E; Witte, Stefan

    2014-10-20

    We demonstrate a technique that enables lensless holographic imaging with extended reference structures, using ultra-broadband radiation sources for illumination. We show that this 'two-pulse imaging' approach works with one- and two-dimensional HERALDO reference structures, and demonstrate that the obtained spectrally resolved data can be used to improve the signal-to-noise ratio in the final image. Intensity stitching of multiple exposures is applied to increase the detected dynamic range, leading to an improved image reconstruction. Furthermore, we show that a combination of holography and iterative phase retrieval can be used to obtain high-quality images quickly and reliably, by using the HERALDO reconstruction as the initial support constraint in the iterative phase retrieval algorithm. A signal-to-noise improvement of two orders of magnitude is achieved compared to the basic HERALDO result.

  19. Information sources in biomedical science and medical journalism: methodological approaches and assessment.

    Science.gov (United States)

    Miranda, Giovanna F; Vercellesi, Luisa; Bruno, Flavia

    2004-09-01

    Throughout the world the public is showing increasing interest in medical and scientific subjects and journalists largely spread this information, with an important impact on knowledge and health. Clearly, therefore, the relationship between the journalist and his sources is delicate: freedom and independence of information depend on the independence and truthfulness of the sources. The new "precision journalism" holds that scientific methods should be applied to journalism, so authoritative sources are a common need for journalists and scientists. We therefore compared the individual classifications and methods of assessing of sources in biomedical science and medical journalism to try to extrapolate scientific methods of evaluation to journalism. In journalism and science terms used to classify sources of information show some similarities, but their meanings are different. In science primary and secondary classes of information, for instance, refer to the levels of processing, but in journalism to the official nature of the source itself. Scientists and journalists must both always consult as many sources as possible and check their authoritativeness, reliability, completeness, up-to-dateness and balance. In journalism, however, there are some important differences and limits: too many sources can sometimes diminish the quality of the information. The sources serve a first filter between the event and the journalist, who is not providing the reader with the fact, but with its projection. Journalists have time constraints and lack the objective criteria for searching, the specific background knowledge, and the expertise to fully assess sources. To assist in understanding the wealth of sources of information in journalism, we have prepared a checklist of items and questions. There are at least four fundamental points that a good journalist, like any scientist, should know: how to find the latest information (the sources), how to assess it (the quality and

  20. Communicating Science to Impact Learning? A Phenomenological Inquiry into 4th and 5th Graders' Perceptions of Science Information Sources

    Science.gov (United States)

    Gelmez Burakgazi, Sevinc; Yildirim, Ali; Weeth Feinstein, Noah

    2016-01-01

    Rooted in science education and science communication studies, this study examines 4th and 5th grade students' perceptions of science information sources (SIS) and their use in communicating science to students. It combines situated learning theory with uses and gratifications theory in a qualitative phenomenological analysis. Data were gathered…

  1. The Los Alamos Neutron Science Center Spallation Neutron Sources

    International Nuclear Information System (INIS)

    Nowicki, Suzanne F.; Wender, Stephen A.; Mocko, Michael

    2017-01-01

    The Los Alamos Neutron Science Center (LANSCE) provides the scientific community with intense sources of neutrons, which can be used to perform experiments supporting civilian and national security research. These measurements include nuclear physics experiments for the defense program, basic science, and the radiation effect programs. This paper focuses on the radiation effects program, which involves mostly accelerated testing of semiconductor parts. When cosmic rays strike the earth's atmosphere, they cause nuclear reactions with elements in the air and produce a wide range of energetic particles. Because neutrons are uncharged, they can reach aircraft altitudes and sea level. These neutrons are thought to be the most important threat to semiconductor devices and integrated circuits. The best way to determine the failure rate due to these neutrons is to measure the failure rate in a neutron source that has the same spectrum as those produced by cosmic rays. Los Alamos has a high-energy and a low-energy neutron source for semiconductor testing. Both are driven by the 800-MeV proton beam from the LANSCE accelerator. The high-energy neutron source at the Weapons Neutron Research (WNR) facility uses a bare target that is designed to produce fast neutrons with energies from 100 keV to almost 800 MeV. The measured neutron energy distribution from WNR is very similar to that of the cosmic-ray-induced neutrons in the atmosphere. However, the flux provided at the WNR facility is typically 5×107 times more intense than the flux of the cosmic-ray-induced neutrons. This intense neutron flux allows testing at greatly accelerated rates. An irradiation test of less than an hour is equivalent to many years of neutron exposure due to cosmic-ray neutrons. The low-energy neutron source is located at the Lujan Neutron Scattering Center. It is based on a moderated source that provides useful neutrons from subthermal energies to ~100 keV. The characteristics of these sources

  2. The Los Alamos Neutron Science Center Spallation Neutron Sources

    Science.gov (United States)

    Nowicki, Suzanne F.; Wender, Stephen A.; Mocko, Michael

    The Los Alamos Neutron Science Center (LANSCE) provides the scientific community with intense sources of neutrons, which can be used to perform experiments supporting civilian and national security research. These measurements include nuclear physics experiments for the defense program, basic science, and the radiation effect programs. This paper focuses on the radiation effects program, which involves mostly accelerated testing of semiconductor parts. When cosmic rays strike the earth's atmosphere, they cause nuclear reactions with elements in the air and produce a wide range of energetic particles. Because neutrons are uncharged, they can reach aircraft altitudes and sea level. These neutrons are thought to be the most important threat to semiconductor devices and integrated circuits. The best way to determine the failure rate due to these neutrons is to measure the failure rate in a neutron source that has the same spectrum as those produced by cosmic rays. Los Alamos has a high-energy and a low-energy neutron source for semiconductor testing. Both are driven by the 800-MeV proton beam from the LANSCE accelerator. The high-energy neutron source at the Weapons Neutron Research (WNR) facility uses a bare target that is designed to produce fast neutrons with energies from 100 keV to almost 800 MeV. The measured neutron energy distribution from WNR is very similar to that of the cosmic-ray-induced neutrons in the atmosphere. However, the flux provided at the WNR facility is typically 5×107 times more intense than the flux of the cosmic-ray-induced neutrons. This intense neutron flux allows testing at greatly accelerated rates. An irradiation test of less than an hour is equivalent to many years of neutron exposure due to cosmic-ray neutrons. The low-energy neutron source is located at the Lujan Neutron Scattering Center. It is based on a moderated source that provides useful neutrons from subthermal energies to ∼100 keV. The characteristics of these sources, and

  3. Science and Technology of Future Light Sources: A White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, a= Janos; Long, Gabrielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z.-X.; Shenoy, Gopal; Schoenlein, Bob; Shen, Qun; /Argonne /Brookhaven /LBL, Berkeley /SLAC, SSRL

    2009-02-03

    Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects (Figure 1.1). The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter

  4. Misconceptions and biases in German students' perception of multiple energy sources: implications for science education

    Science.gov (United States)

    Lee, Roh Pin

    2016-04-01

    Misconceptions and biases in energy perception could influence people's support for developments integral to the success of restructuring a nation's energy system. Science education, in equipping young adults with the cognitive skills and knowledge necessary to navigate in the confusing energy environment, could play a key role in paving the way for informed decision-making. This study examined German students' knowledge of the contribution of diverse energy sources to their nation's energy mix as well as their affective energy responses so as to identify implications for science education. Specifically, the study investigated whether and to what extent students hold mistaken beliefs about the role of multiple energy sources in their nation's energy mix, and assessed how misconceptions could act as self-generated reference points to underpin support/resistance of proposed developments. An in-depth analysis of spontaneous affective associations with five key energy sources also enabled the identification of underlying concerns driving people's energy responses and facilitated an examination of how affective perception, in acting as a heuristic, could lead to biases in energy judgment and decision-making. Finally, subgroup analysis differentiated by education and gender supported insights into a 'two culture' effect on energy perception and the challenge it poses to science education.

  5. Science research with high-brilliance synchrotron light source

    International Nuclear Information System (INIS)

    Sanyal, Milan K.

    2013-01-01

    Synchrotron-science has changed dramatically since the development of high brilliance electron accelerator-based light sources in 1990s. In the last twenty years or so, several such facilities have come up, particularly in developed countries, as material characterizations in relevant atmosphere and protein crystallography with tiny-crystals have strong implications in industrial competitiveness. Moreover several new techniques have been developed recently over the entire spectral range of emitted light, from infra-red to high energy X-rays, which have altered our basic understanding of various materials like biomaterials, nanomaterials, soft-matter and semiconductor quantum structures. In addition, rapid development of various X-ray imaging techniques for nondestructive evaluation of compositional/structural homogeneity of engineering materials with nanometer resolution will have tremendous impact in manufacturing industries. As India becomes a developed country, it must have access to such an advanced synchrotron facility in the country that enables knowledge generation in the ever-expanding fields of design-characterization-production of advanced materials and modern medicines. Development of such state-of-the art facility will also enable us to carry out frontier-basic-research in our own country and help us to retain and bring back Indian talents to India. Here we shall discuss briefly the characteristics of a high brilliance synchrotron source and outline the nature of basic and applied science research that can be done with such a state-of-the-art facility. (author)

  6. Origins Space Telescope: Science Case and Design Reference Mission for Concept 1

    Science.gov (United States)

    Meixner, Margaret; Cooray, Asantha; Pope, Alexandra; Armus, Lee; Vieira, Joaquin Daniel; Milam, Stefanie N.; Melnick, Gary; Leisawitz, David; Staguhn, Johannes G.; Bergin, Edwin; Origins Space Telescope Science and Technology Definition Team

    2018-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies of NASA Headquarters for the 2020 Astronomy and Astrophysics Decadal survey. The science case for OST covers four themes: Tracing the Signature of Life and the Ingredients of Habitable Worlds; Charting the Rise of Metals, Dust and the First Galaxies, Unraveling the Co-evolution of Black Holes and Galaxies and Understanding Our Solar System in the Context of Planetary System Formation. Using a set of proposed observing programs from the community, we estimate a design reference mission for OST mission concept 1. The mission will complete significant programs in these four themes and have time for other programs from the community. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. We welcome you to contact the Science and Technology Definition Team (STDT) with your science needs and ideas by emailing us at ost_info@lists.ipac.caltech.edu.

  7. Cannibalism in Latin-Greek sources: its references in mythology and ancient philosophy

    Directory of Open Access Journals (Sweden)

    Domingo F. Sanz

    2013-06-01

    Full Text Available This article tries to analyze and comment on the greater amount of references regarding the phenomenon of cannibalism that there exists in Greek and Latin literary tradition. After reviewing many of the sources, it is possible to distinguish the different ways in which this tradition approached such phenomenon and to discover a common intention: starting from the mythology or the Homeric epic, going through the different philosophical trends and schools of thought, we will begin to realize and conclude that in many occasions there is a use of the concept of cannibalism to negatively define «the other», the outcast or foreigner, opening thus a topic that still survives nowadays.

  8. Nuclear science research at the WNR and LANSCE neutron sources

    International Nuclear Information System (INIS)

    Lisowski, P.W.

    1994-01-01

    The Weapons Neutron Research (WNR) Facility and the Los Alamos Neutron Scattering Center (LANSCE) use 800 MeV proton beam from the Los Alamos Meson Physics Facility (LAMPF) to generate intense bursts of neutrons. Experiments using time-of-flight (TOF) energy determination can cover an energy range from thermal to about 2 MeV at LANSCE and 0.1 to 800 MeV at WNR. At present, three flight paths at LANSCE and six flight paths at WNR are used in basic and applied nuclear science research. In this paper we present a status report on WNR and LANSCE, discuss plans for the future, and describe three experiments recently completed or underway that use the unique features of these sources

  9. Biographical Sources in the Sciences--Life, Earth and Physical Sciences (1989-2006). LC Science Tracer Bullet. TB 06-4

    Science.gov (United States)

    Freitag, Ruth, Comp.; Bradley, Michelle Cadoree, Comp.

    2006-01-01

    This guide offers a systematic approach to the wide variety of published biographical information on men and women of science in the life, earth and physical sciences, primarily from 1989 to 2006, and complements Library of Congress Science Tracer Bullet "TB88-3" ("Biographical Sources in the Sciences," compiled 1988 [ED306074]) and "TB06-7"…

  10. Other Sources | Women in Science | Initiatives | Indian Academy of ...

    Indian Academy of Sciences (India)

    A Report by National Task Force for Women in Science, DST. ... A Report on Science Career for Indian Women - Indian National Science Academy ... Charusita Chakravarty, one of the stars of our community of women scientists, at a young ...

  11. Application Research of Horn Array Multi-Beam Antenna in Reference Source System for Satellite Interference Location

    Science.gov (United States)

    Zhou, Ping; Lin, Hui; Zhang, Qi

    2018-01-01

    The reference source system is a key factor to ensure the successful location of the satellite interference source. Currently, the traditional system used a mechanical rotating antenna which leaded to the disadvantages of slow rotation and high failure-rate, which seriously restricted the system’s positioning-timeliness and became its obvious weaknesses. In this paper, a multi-beam antenna scheme based on the horn array was proposed as a reference source for the satellite interference location, which was used as an alternative to the traditional reference source antenna. The new scheme has designed a small circularly polarized horn antenna as an element and proposed a multi-beamforming algorithm based on planar array. Moreover, the simulation analysis of horn antenna pattern, multi-beam forming algorithm and simulated satellite link cross-ambiguity calculation have been carried out respectively. Finally, cross-ambiguity calculation of the traditional reference source system has also been tested. The comparison between the results of computer simulation and the actual test results shows that the scheme is scientific and feasible, obviously superior to the traditional reference source system.

  12. Hermeneutic phenomenological multiple case study of the cultural references of elementary teachers and the place of fundamentalist Southern Baptist religion in teaching science

    Science.gov (United States)

    Thomas, Susan Elizabeth Shelton

    It has been said, "The two greatest forces in human history are science and religion" (Schachter-Shalomi & Smith, 1999, p. 220). It is those forces and their influence on science teaching that motivated the focus of this study to explore the cultural referents of elementary teachers and the place of fundamentalist Southern Baptist religious beliefs in teaching elementary science. Through a hermeneutic phenomenological framework, multiple case study method was used to interpret the individual consciousness and classroom lived experiences of three elementary teachers. The particularities surrounding elementary science instruction by devout Southern Baptist teachers was explored through several data sources, which included: personal interactions with the teachers, classroom observations, journaling, and interviews (Stake, 1995; Yin, 2003). Insights gained from this study indicate that the religious component of the culture of elementary teachers affects science teaching and learning. In Alabama, Southern Baptist beliefs influence both the public and private lives of educators. Replicated themes revealed the following themes: (a) a lack of concern for occasionally mentioning God in class due to the conservatively religious nature of Southern culture, (b) the teachers' beliefs affected classroom instruction and student interaction, (c) a commitment to science teaching in the context of the elementary classrooms, and (d) the teachers' as mediators. In addition, the theoretical framework provided an awareness of how the lives of the three educators could yield replicated themes. Indications are for a better understanding of how religion, as part of culture, influences science classroom instruction, including teacher education programs and aspects of science teaching and learning.

  13. A global multicenter study on reference values: 2. Exploration of sources of variation across the countries.

    Science.gov (United States)

    Ichihara, Kiyoshi; Ozarda, Yesim; Barth, Julian H; Klee, George; Shimizu, Yoshihisa; Xia, Liangyu; Hoffmann, Mariza; Shah, Swarup; Matsha, Tandi; Wassung, Janette; Smit, Francois; Ruzhanskaya, Anna; Straseski, Joely; Bustos, Daniel N; Kimura, Shogo; Takahashi, Aki

    2017-04-01

    The intent of this study, based on a global multicenter study of reference values (RVs) for serum analytes was to explore biological sources of variation (SVs) of the RVs among 12 countries around the world. As described in the first part of this paper, RVs of 50 major serum analytes from 13,396 healthy individuals living in 12 countries were obtained. Analyzed in this study were 23 clinical chemistry analytes and 8 analytes measured by immunoturbidimetry. Multiple regression analysis was performed for each gender, country by country, analyte by analyte, by setting four major SVs (age, BMI, and levels of drinking and smoking) as a fixed set of explanatory variables. For analytes with skewed distributions, log-transformation was applied. The association of each source of variation with RVs was expressed as the partial correlation coefficient (r p ). Obvious gender and age-related changes in the RVs were observed in many analytes, almost consistently between countries. Compilation of age-related variations of RVs after adjusting for between-country differences revealed peculiar patterns specific to each analyte. Judged fromthe r p , BMI related changes were observed for many nutritional and inflammatory markers in almost all countries. However, the slope of linear regression of BMI vs. RV differed greatly among countries for some analytes. Alcohol and smoking-related changes were observed less conspicuously in a limited number of analytes. The features of sex, age, alcohol, and smoking-related changes in RVs of the analytes were largely comparable worldwide. The finding of differences in BMI-related changes among countries in some analytes is quite relevant to understanding ethnic differences in susceptibility to nutritionally related diseases. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  14. A radio/optical reference frame. 5: Additional source positions in the mid-latitude southern hemisphere

    Science.gov (United States)

    Russell, J. L.; Reynolds, J. E.; Jauncey, D. L.; de Vegt, C.; Zacharias, N.; Ma, C.; Fey, A. L.; Johnston, K. J.; Hindsley, R.; Hughes, J. A.; Malin, D. F.; White, G. L.; Kawaguchi, N.; Takahashi, Y.

    1994-01-01

    We report new accurate radio position measurements for 30 sources, preliminary positions for two sources, improved radio postions for nine additional sources which had limited previous observations, and optical positions and optical-radio differences for six of the radio sources. The Very Long Baseline Interferometry (VLBI) observations are part of the continuing effort to establish a global radio reference frame of about 400 compact, flat spectrum sources, which are evenly distributed across the sky. The observations were made using Mark III data format in four separate sessions in 1988-89 with radio telescopes at Tidbinbilla, Australia, Kauai, USA, and Kashima, Japan. We observed a total of 54 sources, including ten calibrators and three which were undetected. The 32 new source positions bring the total number in the radio reference frame catalog to 319 (172 northern and 147 southern) and fill in the zone -25 deg greater than delta greater than -45 deg which, prior to this list, had the lowest source density. The VLBI positions have an average formal precision of less than 1 mas, although unknown radio structure effects of about 1-2 mas may be present. The six new optical postion measurements are part of the program to obtain positions of the optical counterparts of the radio reference frame source and to map accurately the optical on to the radio reference frames. The optical measurements were obtained from United States Naval Observatory (USNO) Black Birch astrograph plates and source plates from the AAT, and Kitt Peak National Observatory (KPNO) 4 m, and the European Southern Observatory (ESO) Schmidt. The optical positions have an average precision of 0.07 sec, mostly due to the zero point error when adjusted to the FK5 optical frame using the IRS catalog. To date we have measured optical positions for 46 sources.

  15. The moon as a radiometric reference source for on-orbit sensor stability calibration

    Science.gov (United States)

    Stone, T.C.

    2009-01-01

    The wealth of data generated by the world's Earth-observing satellites, now spanning decades, allows the construction of long-term climate records. A key consideration for detecting climate trends is precise quantification of temporal changes in sensor calibration on-orbit. For radiometer instruments in the solar reflectance wavelength range (near-UV to shortwave-IR), the Moon can be viewed as a solar diffuser with exceptional stability properties. A model for the lunar spectral irradiance that predicts the geometric variations in the Moon's brightness with ???1% precision has been developed at the U.S. Geological Survey in Flagstaff, AZ. Lunar model results corresponding to a series of Moon observations taken by an instrument can be used to stabilize sensor calibration with sub-percent per year precision, as demonstrated by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS). The inherent stability of the Moon and the operational model to utilize the lunar irradiance quantity provide the Moon as a reference source for monitoring radiometric calibration in orbit. This represents an important capability for detecting terrestrial climate change from space-based radiometric measurements.

  16. Shock wave science and technology reference library. Vol. 4. Heterogeneous detonation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Fan (ed.) [Defence Research and Development Canada, Suffield, AB (Canada)

    2009-07-01

    This book, as a volume of the Shock Wave Science and Technology Reference Library, is primarily concerned with detonation waves or compression shock waves in reactive heterogeneous media, including mixtures of solid, liquid and gas phases. The topics involve a variety of energy release and control processes in such media - a contemporary research field that has found wide applications in propulsion and power, hazard prevention as well as military engineering. The six extensive chapters contained in this volume are: - Spray Detonation (SB Murray and PA Thibault) - Detonation of Gas-Particle Flow (F Zhang) - Slurry Detonation (DL Frost and F Zhang) - Detonation of Metalized Composite Explosives (MF Gogulya and MA Brazhnikov) - Shock-Induced Solid-Solid Reactions and Detonations (YA Gordopolov, SS Batsanov, and VS Trofimov) - Shock Ignition of Particles (SM Frolov and AV Fedorov). Each chapter is self-contained and can be read independently of the others, though, they are thematically interrelated. They offer a timely reference, for graduate students as well as professional scientists and engineers, by laying out the foundations and discussing the latest developments including yet unresolved challenging problems. (orig.)

  17. SU-E-T-284: Revisiting Reference Dosimetry for the Model S700 Axxent 50 KVp Electronic Brachytherapy Source

    International Nuclear Information System (INIS)

    Hiatt, JR; Rivard, MJ

    2014-01-01

    Purpose: The model S700 Axxent electronic brachytherapy source by Xoft was characterized in 2006 by Rivard et al. The source design was modified in 2006 to include a plastic centering insert at the source tip to more accurately position the anode. The objectives of the current study were to establish an accurate Monte Carlo source model for simulation purposes, to dosimetrically characterize the new source and obtain its TG-43 brachytherapy dosimetry parameters, and to determine dose differences between the source with and without the centering insert. Methods: Design information from dissected sources and vendor-supplied CAD drawings were used to devise the source model for radiation transport simulations of dose distributions in a water phantom. Collision kerma was estimated as a function of radial distance, r, and polar angle, θ, for determination of reference TG-43 dosimetry parameters. Simulations were run for 10 10 histories, resulting in statistical uncertainties on the transverse plane of 0.03% at r=1 cm and 0.08% at r=10 cm. Results: The dose rate distribution the transverse plane did not change beyond 2% between the 2006 model and the current study. While differences exceeding 15% were observed near the source distal tip, these diminished to within 2% for r>1.5 cm. Differences exceeding a factor of two were observed near θ=150° and in contact with the source, but diminished to within 20% at r=10 cm. Conclusions: Changes in source design influenced the overall dose rate and distribution by more than 2% over a third of the available solid angle external from the source. For clinical applications using balloons or applicators with tissue located within 5 cm from the source, dose differences exceeding 2% were observed only for θ>110°. This study carefully examined the current source geometry and presents a modern reference TG-43 dosimetry dataset for the model S700 source

  18. Determination of the reference air kerma rate for 192Ir brachytherapy sources and the related uncertainty

    International Nuclear Information System (INIS)

    Dijk, Eduard van; Kolkman-Deurloo, Inger-Karine K.; Damen, Patricia M. G.

    2004-01-01

    Different methods exist to determine the air kerma calibration factor of an ionization chamber for the spectrum of a 192 Ir high-dose-rate (HDR) or pulsed-dose-rate (PDR) source. An analysis of two methods to obtain such a calibration factor was performed: (i) the method recommended by [Goetsch et al., Med. Phys. 18, 462-467 (1991)] and (ii) the method employed by the Dutch national standards institute NMi [Petersen et al., Report S-EI-94.01 (NMi, Delft, The Netherlands, 1994)]. This analysis showed a systematic difference on the order of 1% in the determination of the strength of 192 Ir HDR and PDR sources depending on the method used for determining the air kerma calibration factor. The definitive significance of the difference between these methods can only be addressed after performing an accurate analysis of the associated uncertainties. For an NE 2561 (or equivalent) ionization chamber and an in-air jig, a typical uncertainty budget of 0.94% was found with the NMi method. The largest contribution in the type-B uncertainty is the uncertainty in the air kerma calibration factor for isotope i, N k i , as determined by the primary or secondary standards laboratories. This uncertainty is dominated by the uncertainties in the physical constants for the average mass-energy absorption coefficient ratio and the stopping power ratios. This means that it is not foreseeable that the standards laboratories can decrease the uncertainty in the air kerma calibration factors for ionization chambers in the short term. When the results of the determination of the 192 Ir reference air kerma rates in, e.g., different institutes are compared, the uncertainties in the physical constants are the same. To compare the applied techniques, the ratio of the results can be judged by leaving out the uncertainties due to these physical constants. In that case an uncertainty budget of 0.40% (coverage factor=2) should be taken into account. Due to the differences in approach between the

  19. Materials science issues of plasma source ion implantation

    International Nuclear Information System (INIS)

    Nastasi, M.; Faehl, R.J.; Elmoursi, A.A.

    1996-01-01

    Ion beam processing, including ion implantation and ion beam assisted deposition (IBAD), are established surface modification techniques which have been used successfully to synthesize materials for a wide variety of tribological applications. In spite of the flexibility and promise of the technique, ion beam processing has been considered too expensive for mass production applications. However, an emerging technology, Plasma Source Ion Implantation (PSII), has the potential of overcoming these limitations to become an economically viable tool for mass industrial applications. In PSII, targets are placed directly in a plasma and then pulsed-biased to produce a non-line-of-sight process for intricate target geometries without complicated fixturing. If the bias is a relatively high negative potential (20--100 kV) ion implantation will result. At lower voltages (50--1,200 V), deposition occurs. Potential applications for PSII are in low-value-added products such as tools used in manufacturing, orthopedic devices, and the production of wear coatings for hard disk media. This paper will focus on the technology and materials science associated with PSII

  20. The Poisson alignment reference system implementation at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Feier, I.

    1998-01-01

    The Poisson spot was established using a collimated laser beam from a 3-mW diode laser. It was monitored on a quadrant detector and found to be very sensitive to vibration and air disturbances. Therefore, for future work we strongly recommend a sealed vacuum tube in which the Poisson line may be propagated. A digital single-axis feedback system was employed to generate an straight line reference (SLR) on the X axis. Pointing accuracy was better than 8 ± 2 microns at a distance of 5 m. The digital system was found to be quite slow with a maximum bandwidth of 47 ± 9 Hz. Slow drifts were easily corrected but any vibration over 5 Hz was not. We recommend an analog proportional-integral-derivative (PID) controller for high bandwidth and smooth operation of the kinematic mirror. Although the Poisson alignment system (PAS) at the Advanced Photon Source is still in its infancy, it already shows great promise as a possible alignment system for the low-energy undulator test line (LEUTL). Since components such as wigglers and quadruples will initially be aligned with respect to each other using conventional means and mounted on some kind of rigid rail, the goal would be to align six to ten such rails over a distance of about 30 m. The PAS could be used to align these rails by mounting a sphere at the joint between two rails. These spheres would need to be in a vacuum pipe to eliminate the refractive effects of air. Each sphere would not be attached to either rail but instead to a flange connecting the vacuum pipes of each rail. Thus the whole line would be made up of straight, rigid segments that could be aligned by moving the joints. Each sphere would have its own detector, allowing the operators to actively monitor the position of each joint and therefore the overall alignment of the system

  1. Virtual Labs (Science Gateways) as platforms for Free and Open Source Science

    Science.gov (United States)

    Lescinsky, David; Car, Nicholas; Fraser, Ryan; Friedrich, Carsten; Kemp, Carina; Squire, Geoffrey

    2016-04-01

    The Free and Open Source Software (FOSS) movement promotes community engagement in software development, as well as provides access to a range of sophisticated technologies that would be prohibitively expensive if obtained commercially. However, as geoinformatics and eResearch tools and services become more dispersed, it becomes more complicated to identify and interface between the many required components. Virtual Laboratories (VLs, also known as Science Gateways) simplify the management and coordination of these components by providing a platform linking many, if not all, of the steps in particular scientific processes. These enable scientists to focus on their science, rather than the underlying supporting technologies. We describe a modular, open source, VL infrastructure that can be reconfigured to create VLs for a wide range of disciplines. Development of this infrastructure has been led by CSIRO in collaboration with Geoscience Australia and the National Computational Infrastructure (NCI) with support from the National eResearch Collaboration Tools and Resources (NeCTAR) and the Australian National Data Service (ANDS). Initially, the infrastructure was developed to support the Virtual Geophysical Laboratory (VGL), and has subsequently been repurposed to create the Virtual Hazards Impact and Risk Laboratory (VHIRL) and the reconfigured Australian National Virtual Geophysics Laboratory (ANVGL). During each step of development, new capabilities and services have been added and/or enhanced. We plan on continuing to follow this model using a shared, community code base. The VL platform facilitates transparent and reproducible science by providing access to both the data and methodologies used during scientific investigations. This is further enhanced by the ability to set up and run investigations using computational resources accessed through the VL. Data is accessed using registries pointing to catalogues within public data repositories (notably including the

  2. Science, Neutrality and Objectivity in Nuclear Research: Shared References or Ideal Types?

    International Nuclear Information System (INIS)

    Bovy, Michel; Laes, Erik; Eggermont, Gilbert

    2003-01-01

    Science, neutrality and objectivity in nuclear research are shared references because they can be considered as useful ideal types to support the communication process. This doesn't mean these references are empty, or have no effects on the organizational level. But the expert needs to recognize which type of justification he's ready to share with others (should it be peers or other social actors) because he has to share two types of communication process. The closure is less in the object than in the acceptance of a shared ideal world justification. While the expert uses the methodology of science to focus on the relevancy of some means, the layman requires being part of their communication process before the black box is closed, not becoming a scientist himself. The gap can be reduced by a combined effort to open up the communication process to each other based on a justification principle that cannot be mastered in advance by one side. This clearly show us democracy is not a question only debated in the governmental spheres but also in new kind of Parliaments allowing exchanges and open discussions removed from some pre-determined roles play. This requires time and sufficient room of manoeuvre from both sides. For example, it means interactions conditioned by the urgent necessity to make acceptable some technical depository solution for nuclear waste build some communication walls in terms of justification. The whole design process of society sometimes is at stake because of some inherited justification principles making science, independence and neutrality responsible for our welfare and safety. A solution could consist of using this framework in the beginning of the process and not in an attempt to stop controversies when results are needed (as a depository for nuclear waste). Another one could consist of enlarging the actor-network to more actors bringing more justification principles and varied interests. This won't be seen as a search for more order but a

  3. Time-Dependent Selection of an Optimal Set of Sources to Define a Stable Celestial Reference Frame

    Science.gov (United States)

    Le Bail, Karine; Gordon, David

    2010-01-01

    Temporal statistical position stability is required for VLBI sources to define a stable Celestial Reference Frame (CRF) and has been studied in many recent papers. This study analyzes the sources from the latest realization of the International Celestial Reference Frame (ICRF2) with the Allan variance, in addition to taking into account the apparent linear motions of the sources. Focusing on the 295 defining sources shows how they are a good compromise of different criteria, such as statistical stability and sky distribution, as well as having a sufficient number of sources, despite the fact that the most stable sources of the entire ICRF2 are mostly in the Northern Hemisphere. Nevertheless, the selection of a stable set is not unique: studying different solutions (GSF005a and AUG24 from GSFC and OPA from the Paris Observatory) over different time periods (1989.5 to 2009.5 and 1999.5 to 2009.5) leads to selections that can differ in up to 20% of the sources. Observing, recording, and network improvement are some of the causes, showing better stability for the CRF over the last decade than the last twenty years. But this may also be explained by the assumption of stationarity that is not necessarily right for some sources.

  4. The Kepler Science Data Processing Pipeline Source Code Road Map

    Science.gov (United States)

    Wohler, Bill; Jenkins, Jon M.; Twicken, Joseph D.; Bryson, Stephen T.; Clarke, Bruce Donald; Middour, Christopher K.; Quintana, Elisa Victoria; Sanderfer, Jesse Thomas; Uddin, Akm Kamal; Sabale, Anima; hide

    2016-01-01

    We give an overview of the operational concepts and architecture of the Kepler Science Processing Pipeline. Designed, developed, operated, and maintained by the Kepler Science Operations Center (SOC) at NASA Ames Research Center, the Science Processing Pipeline is a central element of the Kepler Ground Data System. The SOC consists of an office at Ames Research Center, software development and operations departments, and a data center which hosts the computers required to perform data analysis. The SOC's charter is to analyze stellar photometric data from the Kepler spacecraft and report results to the Kepler Science Office for further analysis. We describe how this is accomplished via the Kepler Science Processing Pipeline, including, the software algorithms. We present the high-performance, parallel computing software modules of the pipeline that perform transit photometry, pixel-level calibration, systematic error correction, attitude determination, stellar target management, and instrument characterization.

  5. A Framework for Evaluating Science and Technology Electronic Reference Books: A Comparison of Five Platforms in Chemistry

    Science.gov (United States)

    Lafferty, Meghan

    2009-01-01

    This article examines what is desirable in online reference books in science and technology and outlines a framework for evaluating their interfaces. The framework considers factors unique to these subject areas like chemical structures and numerical data. Criteria in three categories, navigability, searchability, and results, were applied to five…

  6. Systematical and statistical errors in using reference light sources to calibrate TLD readers

    International Nuclear Information System (INIS)

    Burgkhardt, B.; Piesch, E.

    1981-01-01

    Three light sources, namely an NaI(Tl) scintillator + Ra, an NaI(Tl) scintillator + 14 C and a plastic scintillator + 14 C, were used during a period of 24 months for a daily check of two TLD readers: the Harshaw 2000 A + B and the Toledo 651. On the basis of light source measurements long-term changes and day-to-day fluctuations of the reader response were investigated. Systematical changes of the Toledo reader response of up to 6% during a working week are explained by nitrogen effects in the plastic scintillator light source. It was found that the temperature coefficient of the light source intensity was -0.05%/ 0 C for the plastic scintillator and -0.3%/ 0 C for the NaI(Tl) scintillator. The 210 Pb content in the Ra activated NaI(Tl) scintillator caused a time-dependent decrease in light source intensity of 3%/yr for the light source in the Harshaw reader. The internal light sources revealed a relative standard deviation of 0.5% for the Toledo reader and the Harshaw reader after respective reading times of 0.45 and 100 sec. (author)

  7. Using and Developing Measurement Instruments in Science Education: A Rasch Modeling Approach. Science & Engineering Education Sources

    Science.gov (United States)

    Liu, Xiufeng

    2010-01-01

    This book meets a demand in the science education community for a comprehensive and introductory measurement book in science education. It describes measurement instruments reported in refereed science education research journals, and introduces the Rasch modeling approach to developing measurement instruments in common science assessment domains,…

  8. Sources of Science Teaching Self-Efficacy for Preservice Elementary Teachers in Science Content Courses

    Science.gov (United States)

    Menon, Deepika; Sadler, Troy D.

    2018-01-01

    Self-efficacy beliefs play a major role in determining teachers' science teaching practices and have been a topic of great interest in the area of preservice science teacher education. This qualitative study investigated factors that influenced preservice elementary teachers' science teaching self-efficacy beliefs in a physical science content…

  9. The Role of Virtual Reference in Library Web Site Design: A Qualitative Source for Usage Data

    Science.gov (United States)

    Powers, Amanda Clay; Shedd, Julie; Hill, Clay

    2011-01-01

    Gathering qualitative information about usage behavior of library Web sites is a time-consuming process requiring the active participation of patron communities. Libraries that collect virtual reference transcripts, however, hold valuable data regarding how the library Web site is used that could benefit Web designers. An analysis of virtual…

  10. EOS Reference Handbook 1999: A Guide to NASA's Earth Science Enterprise and the Earth Observing System

    Science.gov (United States)

    King, M. D. (Editor); Greenstone, R. (Editor)

    2000-01-01

    The content of this handbook includes Earth Science Enterprise; The Earth Observing System; EOS Data and Information System (EOSDIS); Data and Information Policy; Pathfinder Data Sets; Earth Science Information Partners and the Working Prototype-Federation; EOS Data Quality: Calibration and Validation; Education Programs; International Cooperation; Interagency Coordination; Mission Elements; EOS Instruments; EOS Interdisciplinary Science Investigations; and Points-of-Contact.

  11. Possibility of using sources of vacuum ultraviolet irradiation to solve problems of space material science

    Science.gov (United States)

    Verkhoutseva, E. T.; Yaremenko, E. I.

    1974-01-01

    An urgent problem in space materials science is simulating the interaction of vacuum ultraviolet (VUV) of solar emission with solids in space conditions, that is, producing a light source with a distribution that approximates the distribution of solar energy. Information is presented on the distribution of the energy flux of VUV of solar radiation. Requirements that must be satisfied by the VUV source used for space materials science are formulated, and a critical evaluation is given of the possibilities of using existing sources for space materials science. From this evaluation it was established that none of the sources of VUV satisfies the specific requirements imposed on the simulator of solar radiation. A solution to the problem was found to be in the development of a new type of source based on exciting a supersonic gas jet flowing into vacuum with a sense electron beam. A description of this gas-jet source, along with its spectral and operation characteristics, is presented.

  12. Eyeballs in the Fridge: Sources of Early Interest in Science

    Science.gov (United States)

    Maltese, Adam V.; Tai, Robert H.

    2010-01-01

    This paper examines the experiences reported by scientists and graduate students regarding the experiences that first engaged them in science. The interviews analysed for this paper come from Project Crossover, a mixed-methods study of the transition from graduate student to PhD scientist in the fields of chemistry and physics. This analysis…

  13. Science Study Aids 3: Carbohydrates - Nature's Energy Source.

    Science.gov (United States)

    McConnell, Bill

    This publication is the third of a series of seven supplementary investigative materials for use in secondary science classes providing up-to-date research-related investigations. This unit is structured for grade levels 7 through 12. It is concerned with the role of carbohydrates as important nutrients for consumers. This guide will enable…

  14. Science Teachers' Pedagogical Discontentment: Its Sources and Potential for Change

    Science.gov (United States)

    Southerland, Sherry A.; Sowell, Scott; Enderle, Patrick

    2011-01-01

    This research explored science teachers' pedagogical discontentment and described its role in teachers' consideration of new teaching practices. Pedagogical discontentment is an expression of the degree to which one is discontented because one's teaching practices do not achieve one's teaching goals. Through a series of structured interviews…

  15. On the source material of magmas - with special reference to Nd isotopic ratios of igneous rocks

    International Nuclear Information System (INIS)

    Shuto, Kenji

    1980-01-01

    In 1973, the Sm-Nd method was first used for the measurement of the absolute age of igneous rocks and meteorites. Subsequently in the following years, the research works by means of the Nd isotopic ratio in igneous rocks have been made strenuously in order to reveal the chemistry of the source materials of magma giving rise to the igneous rocks and further the evolution process of mantle and earth's crust. The fundamental items for the Sm-Nd method are explained. Then, the research results more important in the above connection are given. Finally, the ideas by the author concerning the source materials of magma are presented from the data available on the Nd isotopes in meteorites and igneous rocks. The following matters are described: the fundamentals of Sm-Nd method, the Nd content in seawater, the negative correlation between Nd and Sr isotopic ratios in igneous rocks, magma source materials and Nd isotopes, and considerations on magma source materials. (J.P.N.)

  16. Open Science: Open source licenses in scientific research

    OpenAIRE

    Guadamuz, Andres

    2006-01-01

    The article examines the validity of OSS (open source software) licenses for scientific, as opposed to creative works. It draws on examples of OSS licenses to consider their suitability for the scientific community and scientific research.

  17. Validity of "Hi_Science" as instructional media based-android refer to experiential learning model

    Science.gov (United States)

    Qamariah, Jumadi, Senam, Wilujeng, Insih

    2017-08-01

    Hi_Science is instructional media based-android in learning science on material environmental pollution and global warming. This study is aimed: (a) to show the display of Hi_Science that will be applied in Junior High School, and (b) to describe the validity of Hi_Science. Hi_Science as instructional media created with colaboration of innovative learning model and development of technology at the current time. Learning media selected is based-android and collaborated with experiential learning model as an innovative learning model. Hi_Science had adapted student worksheet by Taufiq (2015). Student worksheet had very good category by two expert lecturers and two science teachers (Taufik, 2015). This student worksheet is refined and redeveloped in android as an instructional media which can be used by students for learning science not only in the classroom, but also at home. Therefore, student worksheet which has become instructional media based-android must be validated again. Hi_Science has been validated by two experts. The validation is based on assessment of meterials aspects and media aspects. The data collection was done by media assessment instrument. The result showed the assessment of material aspects has obtained the average value 4,72 with percentage of agreement 96,47%, that means Hi_Science on the material aspects is in excellent category or very valid category. The assessment of media aspects has obtained the average value 4,53 with percentage of agreement 98,70%, that means Hi_Science on the media aspects is in excellent category or very valid category. It was concluded that Hi_Science as instructional media can be applied in the junior high school.

  18. RUBI -a Reference mUltiscale Boiling Investigation for the Fluid Science Laboratory

    Science.gov (United States)

    Schweizer, Nils; Stelzer, Marco; Schoele-Schulz, Olaf; Picker, Gerold; Ranebo, Hans; Dettmann, Jan; Minster, Olivier; Toth, Balazs; Winter, Josef; Tadrist, Lounes; Stephan, Peter; Grassi, Walter; di Marco, Paolo; Colin, Catherine; Piero Celata, Gian; Thome, John; Kabov, Oleg

    Boiling is a two-phase heat transfer process where large heat fluxes can be transferred with small driving temperature differences. The high performance of boiling makes the process very interesting for heat transfer applications and it is widely used in industry for example in power plants, refrigeration systems, and electronics cooling. Nevertheless, due to the large number of involved phenomena and their often highly dynamic nature a fundamental understanding and closed theoretical description is not yet accomplished. The design of systems incorporating the process is generally based on empirical correlations, which are commonly accompanied by large uncertainties and, thus, has to be verified by expensive test campaigns. Hence, strong efforts are currently made to develop applicable numerical tools for a reliable prediction of the boiling heat transfer performance and limits. In order to support and validate this development and, in particular as a precondition, to enhance the basic knowledge about boiling the comprehensive multi-scale experiment RUBI (Reference mUlti-scale Boiling Investigation) for the Fluid Science Laboratory on board the ISS is currently in preparation. The scientific objectives and requirements of RUBI have been defined by the members of the ESA topical team "Boiling and Multiphase Flow" and addresses fundamental aspects of boiling phenomena. The main objectives are the measurement of wall temperature and heat flux distribution underneath vapour bubbles with high spatial and tem-poral resolution by means of IR thermography accompanied by the synchronized high-speed observation of the bubble shapes. Furthermore, the fluid temperature in the vicinity and inside of the bubbles will be measured by a micro sensor array. Additional stimuli are the generation of an electric field above the heating surface and a shear flow created by a forced convection loop. The objective of these stimuli is to impose forces on the bubbles and investigate the

  19. Selecting and Using Information Sources: Source Preferences and Information Pathways of Israeli Library and Information Science Students

    Science.gov (United States)

    Bronstein, Jenny

    2010-01-01

    Introduction: The study investigated the source preference criteria of library and information science students for their academic and personal information needs. Method: The empirical study was based on two methods of data collection. Eighteen participants wrote a personal diary for four months in which they recorded search episodes and answered…

  20. Hydrate studies of northern Cascadia margin off Vancouver Island : a reference source

    Energy Technology Data Exchange (ETDEWEB)

    Hyndman, R. [Natural Resources Canada, Sidney, BC (Canada). Geological Survey of Canada, Pacific Geoscience Centre]|[Victoria Univ., BC (Canada). School of Earth and Ocean Sciences; Riedel, M. [McGill Univ., Montreal, PQ (Canada). Dept. of Earth and Planetary Sciences; Spence, G.D. [Victoria Univ., BC (Canada). School of Earth and Ocean Sciences

    2008-07-01

    Extensive geophysical studies have been conducted to determine the occurrence, distribution, and concentration of gas hydrate in the Cascadia subduction zone off western Canada. In this paper, the authors compiled a comprehensive reference list of studies involving marine natural gas hydrate surveys and studies on the northern Cascadia margin. The reference categories included general reviews; regional tectonic framework for northern Cascadia hydrate; prism sediment thickening, fluid expulsion and hydrate formation; and, seismic surveys. This paper first addressed the local tectonics and the sedimentary accretionary prism in which the hydrate forms, followed by a description of the geophysical and geological surveys that have been conducted. The surveys included a wide range of seismic surveys such as multichannel, ocean-bottom, high-resolution single channel and very high resolution deep towed surveys. Heat flow, electrical sounding, seafloor compliance, sediment coring, and mapping gas plumes from the seafloor were among the other geophysical studies listed in this paper. The conclusions that have resulted from this work in terms of distribution, concentrations and amounts of hydrate were presented along with a discussion on the process of hydrate formation and dissociation. 96 refs., 3 figs.

  1. Science education with the help of media. Educating science concerning the help of current news of media referring to it

    International Nuclear Information System (INIS)

    Lazar, I.; Agoston, L.

    2005-01-01

    In the last decades, at the beginning of the 21st century high school students turn their back on science more frequently than before, therefore the generation of the community of reliable scientists and experts becomes the elder. The time spent studying science in schools is also decreasing. However, mass-communication, electronic and traditional media plays more and more part in the description and explanation of scientific problems in our time. Media is inundated with questions, facts and rumours in connection with science, therefore imaginary fears, beliefs and superstitions can get into the limelight of interests. Problems like keeping people frightened with radioactivity and the ionizing and non-ionizing radiations is probably the most popular way of making ''bad news'' (panic) in the mass-media, and they particularly call our attention to the most current tasks in education of the next generations. In order to help to keep the public informed in a precise and exact way, it's necessary to put natural science into practice in high schools. Our new method of science education could prove the necessity of science taught through the current news of the media. This means students learn by making discussions and corrections of the news. The Science and Media Project provides the possibility of applying scientific ways of thinking about questions of our environment and life and it also improves critical approach towards new information. This method is put to practice by real project works, including a lot of fieldwork and reading of papers and scientific literature, enabling the students to discover and solve problems by themselves. (author)

  2. Environmental Science Program at the Advanced Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Susan; Shuh, David; Nico, Peter

    2005-06-01

    Synchrotron Radiation (SR)-based techniques have become an essential and fundamental research tool in Molecular Environmental Science (MES) research. MES is an emerging scientific field that has largely evolved from research interactions at the U.S. Department of Energy (U.S. DOE) SR laboratories in response to the pressing need for understanding fundamental molecular-level chemical and biological processes that involve the speciation, properties, and behavior of contaminants, within natural systems. The role of SR-based investigations in MES and their impact on environmental problems of importance to society has been recently documented in Molecular Environmental Science: An Assessment of Research Accomplishment, Available Synchrotron Radiation Facilities, and Needs (EnviroSync, 2003).

  3. Annotated Bibliography of Textbooks and Reference Materials in Marine Sciences. Provisional Edition. Intergovernmental Oceanographic Commission, Technical Series.

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Intergovernmental Oceanographic Commission.

    Presented is an annotated bibliography based on selected materials from a preliminary survey of existing bibliographies, publishers' listings, and other sources. It is intended to serve educators and researchers, especially those in countries where marine sciences are just developing. One hundred annotated and 450 non-annotated entries are…

  4. Variability of extragalactic sources: its contribution to the link between ICRF and the future Gaia Celestial Reference Frame

    Science.gov (United States)

    Taris, F.; Damljanovic, G.; Andrei, A.; Souchay, J.; Klotz, A.; Vachier, F.

    2018-03-01

    Context. The first release of the Gaia catalog is available since 14 September 2016. It is a first step in the realization of the future Gaia reference frame. This reference frame will be materialized by the optical positions of the sources and will be compared with and linked to the International Celestial Reference Frame, materialized by the radio position of extragalactic sources. Aim. As in the radio domain, it can be reasonably postulated that quasar optical flux variations can alert us to potential changes in the source structure. These changes could have important implications for the position of the target photocenters (together with the evolution in time of these centers) and in parallel have consequences for the link of the reference systems. Methods: A set of nine optical telescopes was used to monitor the magnitude variations, often at the same time as Gaia, thanks to the Gaia Observation Forecast Tool. The Allan variances, which are statistical tools widely used in the atomic time and frequency community, are introduced. Results: This work describes the magnitude variations of 47 targets that are suitable for the link between reference systems. We also report on some implications for the Gaia catalog. For 95% of the observed targets, new information about their variability is reported. In the case of some targets that are well observed by the TAROT telescopes, the Allan time variance shows that the longest averaging period of the magnitudes is in the range 20-70 d. The observation period by Gaia for a single target largely exceeds these values, which might be a problem when the magnitude variations exhibit flicker or random walk noises. Preliminary computations show that if the coordinates of the targets studied in this paper were affected by a white-phase noise with a formal uncertainty of about 1 mas (due to astrophysical processes that are put in evidence by the magnitude variations of the sources), it would affect the precision of the link at the

  5. Plagiarism Detection Algorithm for Source Code in Computer Science Education

    Science.gov (United States)

    Liu, Xin; Xu, Chan; Ouyang, Boyu

    2015-01-01

    Nowadays, computer programming is getting more necessary in the course of program design in college education. However, the trick of plagiarizing plus a little modification exists among some students' home works. It's not easy for teachers to judge if there's plagiarizing in source code or not. Traditional detection algorithms cannot fit this…

  6. A Manual to Identify Sources of Fluvial Sediment | Science ...

    Science.gov (United States)

    Sedimentation is one of the main causes of stream/river aquatic life use impairments in R3. Currently states lack standard guidance on appropriate tools available to quantify sediment sources and develop sediment budgets in TMDL Development. Methods for distinguishing sediment types for TMDL development will focus stream restoration and soil conservation efforts in strategic locations in a watershed and may better target appropriate BMPs to achieve sediment load reductions. Properly identifying sediment sources in a TMDL will also help focus NPDES permitting, stream restoration activities and other TMDL implementation efforts. This project will focus on developing a framework that will be published as a guidance document that outlines steps and approaches to identify the significant sources of fine-grained sediment in 303D listed watersheds. In this framework, the sediment-fingerprinting and sediment budget approaches will be emphasized. This project will focus on developing a framework that will be published as a guidance document that outlines steps and approaches to identify the significant sources of fine-grained sediment in 303D listed watersheds. In this framework, the sediment-fingerprinting and sediment budget approaches will be emphasized.

  7. The influence of lithology on surface water sources | Science ...

    Science.gov (United States)

    Understanding the temporal and spatial variability of surface water sources within a basin is vital to our ability to manage the impacts of climate variability and land cover change. Water stable isotopes can be used as a tool to determine geographic and seasonal sources of water at the basin scale. Previous studies in the Coastal Range of Oregon reported that the variation in the isotopic signatures of surface water does not conform to the commonly observed “rainout effect”, which exhibits a trend of increasing isotopic depletion with rising elevation. The primary purpose of this research is to investigate the mechanisms governing seasonal and spatial variations in the isotopic signature of surface waters within the Marys River Basin, located in the leeward side of the Oregon Coastal Range. Surface water and precipitation samples were collected every 2-3 weeks for isotopic analysis of δ18O and δ2H for one year. Results indicate a significant difference in isotopic signature between watersheds underlain by basalt and sandstone. The degree of separation was the most distinct during the summer when low flows reflect deeper groundwater sources, whereas isotopic signatures during the rainy season (fall and winter) showed a greater degree of similarity between the two lithologies. This indicates that baseflow within streams drained by sandstone versus basalt is being supplied from two distinctly separate water sources. In addition, Marys River flow at the outle

  8. LED deep UV source for charge management of gravitational reference sensors

    International Nuclear Information System (INIS)

    Sun Kexun; Allard, Brett; Buchman, Saps; Williams, Scott; Byer, Robert L

    2006-01-01

    Proof mass electrical charge management is an important functionality for the ST-7-LTP technology demonstration flight and for LISA. Photoemission for charge control is accomplished by using deep ultraviolet (UV) light to excite photoelectron emission from an Au alloy. The conventional UV source is a mercury vapour lamp. We propose and demonstrate charge management using a deep UV light emitting diode (LED) source. We have acquired selected AlGaN UV LEDs, characterized their performance and successfully used them to realize charge management. The UV LEDs emit at a 257 nm central wavelength with a bandwidth of ∼12 nm. The UV power for a free-space LED is ∼120 μW, and after fibre coupling is ∼16 μW, more than sufficient for LISA applications. We have directly observed the LED UV light-induced photocurrent response from an Au photocathode and an Au-coated GRS/ST-7 proof mass. We demonstrated fast switching of UV LEDs and associated fast changes in photocurrent. This allows modulation and continuous discharge to meet stringent LISA disturbance reduction requirements. We propose and demonstrate AC charge management outside the gravitational wave signal band. Further, the megahertz bandwidth for UV LED switching allows for up to six orders of magnitude dynamic power range and a number of novel modes of operations. The UV LED based charge management system offers the advantages of small-size, lightweight, fibre-coupled operation with very low power consumption

  9. Design and validation of an open-source library of dynamic reference frames for research and education in optical tracking.

    Science.gov (United States)

    Brown, Alisa; Uneri, Ali; Silva, Tharindu De; Manbachi, Amir; Siewerdsen, Jeffrey H

    2018-04-01

    Dynamic reference frames (DRFs) are a common component of modern surgical tracking systems; however, the limited number of commercially available DRFs poses a constraint in developing systems, especially for research and education. This work presents the design and validation of a large, open-source library of DRFs compatible with passive, single-face tracking systems, such as Polaris stereoscopic infrared trackers (NDI, Waterloo, Ontario). An algorithm was developed to create new DRF designs consistent with intra- and intertool design constraints and convert to computer-aided design (CAD) files suitable for three-dimensional printing. A library of 10 such groups, each with 6 to 10 DRFs, was produced and tracking performance was validated in comparison to a standard commercially available reference, including pivot calibration, fiducial registration error (FRE), and target registration error (TRE). Pivot tests showed calibration error [Formula: see text], indistinguishable from the reference. FRE was [Formula: see text], and TRE in a CT head phantom was [Formula: see text], both equivalent to the reference. The library of DRFs offers a useful resource for surgical navigation research and could be extended to other tracking systems and alternative design constraints.

  10. Science experiments via telepresence at a synchrotron radiation source facility

    International Nuclear Information System (INIS)

    Warren, J. E.; Diakun, G.; Bushnell-Wye, G.; Fisher, S.; Thalal, A.; Helliwell, M.; Helliwell, J. R.

    2008-01-01

    The application of a turnkey communication system for telepresence at station 9.8 of the Synchrotron Radiation Source, Daresbury, is described and demonstrated, including its use for inter-continental classroom instruction and user training. Station 9.8 is one of the most oversubscribed and high-throughput stations at the Synchrotron Radiation Source, Daresbury, whereby awarded experimental time is limited, data collections last normally no longer than an hour, user changeover is normally every 24 h, and familiarity with the station systems can be low. Therefore time lost owing to technical failures on the station has a dramatic impact on productivity. To provide 24 h support, the application of a turnkey communication system has been implemented, and is described along with additional applications including its use for inter-continental classroom instruction, user training and remote participation

  11. An image-based skeletal dosimetry model for the ICRP reference newborn-internal electron sources

    International Nuclear Information System (INIS)

    Pafundi, Deanna; Lee, Choonsik; Bolch, Wesley; Rajon, Didier; Jokisch, Derek

    2010-01-01

    In this study, a comprehensive electron dosimetry model of newborn skeletal tissues is presented. The model is constructed using the University of Florida newborn hybrid phantom of Lee et al (2007 Phys. Med. Biol. 52 3309-33), the newborn skeletal tissue model of Pafundi et al (2009 Phys. Med. Biol. 54 4497-531) and the EGSnrc-based Paired Image Radiation Transport code of Shah et al (2005 J. Nucl. Med. 46 344-53). Target tissues include the active bone marrow (surrogate tissue for hematopoietic stem cells), shallow marrow (surrogate tissue for osteoprogenitor cells) and unossified cartilage (surrogate tissue for chondrocytes). Monoenergetic electron emissions are considered over the energy range 1 keV to 10 MeV for the following source tissues: active marrow, trabecular bone (surfaces and volumes), cortical bone (surfaces and volumes) and cartilage. Transport results are reported as specific absorbed fractions according to the MIRD schema and are given as skeletal-averaged values in the paper with bone-specific values reported in both tabular and graphic format as electronic annexes (supplementary data). The method utilized in this work uniquely includes (1) explicit accounting for the finite size and shape of newborn ossification centers (spongiosa regions), (2) explicit accounting for active and shallow marrow dose from electron emissions in cortical bone as well as sites of unossified cartilage, (3) proper accounting of the distribution of trabecular and cortical volumes and surfaces in the newborn skeleton when considering mineral bone sources and (4) explicit consideration of the marrow cellularity changes for active marrow self-irradiation as applicable to radionuclide therapy of diseased marrow in the newborn child.

  12. An image-based skeletal dosimetry model for the ICRP reference newborn-internal electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Pafundi, Deanna; Lee, Choonsik; Bolch, Wesley [Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, FL (United States); Rajon, Didier [Department of Neurosurgery, University of Florida, Gainesville, FL (United States); Jokisch, Derek [Department of Physics and Astronomy, Francis Marion University, Florence, SC (United States)], E-mail: wbolch@ufl.edu

    2010-04-07

    In this study, a comprehensive electron dosimetry model of newborn skeletal tissues is presented. The model is constructed using the University of Florida newborn hybrid phantom of Lee et al (2007 Phys. Med. Biol. 52 3309-33), the newborn skeletal tissue model of Pafundi et al (2009 Phys. Med. Biol. 54 4497-531) and the EGSnrc-based Paired Image Radiation Transport code of Shah et al (2005 J. Nucl. Med. 46 344-53). Target tissues include the active bone marrow (surrogate tissue for hematopoietic stem cells), shallow marrow (surrogate tissue for osteoprogenitor cells) and unossified cartilage (surrogate tissue for chondrocytes). Monoenergetic electron emissions are considered over the energy range 1 keV to 10 MeV for the following source tissues: active marrow, trabecular bone (surfaces and volumes), cortical bone (surfaces and volumes) and cartilage. Transport results are reported as specific absorbed fractions according to the MIRD schema and are given as skeletal-averaged values in the paper with bone-specific values reported in both tabular and graphic format as electronic annexes (supplementary data). The method utilized in this work uniquely includes (1) explicit accounting for the finite size and shape of newborn ossification centers (spongiosa regions), (2) explicit accounting for active and shallow marrow dose from electron emissions in cortical bone as well as sites of unossified cartilage, (3) proper accounting of the distribution of trabecular and cortical volumes and surfaces in the newborn skeleton when considering mineral bone sources and (4) explicit consideration of the marrow cellularity changes for active marrow self-irradiation as applicable to radionuclide therapy of diseased marrow in the newborn child.

  13. Middle School Students' Science Self-Efficacy and Its Sources: Examination of Gender Difference

    Science.gov (United States)

    Kiran, Dekant; Sungur, Semra

    2012-01-01

    The main purpose of the present study is to investigate middle school students' science self-efficacy as well as its sources and outcomes as a function of gender. Bandura's hypothesized sources of self-efficacy (i.e., mastery experience, vicarious experience, verbal persuasion, and emotional arousal) in addition to being inviting with self and…

  14. Liquid Li based neutron source for BNCT and science application

    International Nuclear Information System (INIS)

    Horiike, H.; Murata, I.; Iida, T.; Yoshihashi, S.; Hoashi, E.; Kato, I.; Hashimoto, N.; Kuri, S.; Oshiro, S.

    2015-01-01

    Liquid lithium (Li) is a candidate material for a target of intense neutron source, heat transfer medium in space engines and charges stripper. For a medical application of BNCT, epithermal neutrons with least energetic neutrons and γ-ray are required so as to avoid unnecessary doses to a patient. This is enabled by lithium target irradiated by protons at 2.5 MeV range, with utilizing the threshold reaction of "7Li(p,n)"7Be at 1.88 MeV. In the system, protons at 2.5 MeV penetrate into Li layer by 0.25 mm with dissipating heat load near the surface. To handle it, thin film flow of high velocity is important for stable operation. For the proton accelerator, electrostatic type of the Schnkel or the tandem is planned to be employed. Neutrons generated at 0.6 MeV are gently moderated to epithermal energy while suppressing accompanying γ-ray minimum by the dedicated moderator assembly. - Highlights: • Liquid lithium (Li) is a candidate material for a target of intense neutron source. • An accelerator based neutron source with p-liquid Li target for boron neutron capture therapy is under development in Osaka University, Japan. • In our system, the harmful radiation dose due to rays and fast neutrons will be suppressed very low. • The system performance are very promising as a state of art cancer treatment system. • The project is planned as a joint undertaking between industries and Osaka University.

  15. Integrated photon sources for quantum information science applications

    Science.gov (United States)

    Fanto, M. L.; Tison, C. C.; Steidle, J. A.; Lu, T.; Wang, Z.; Mogent, N. A.; Rizzo, A.; Thomas, P. M.; Preble, S. F.; Alsing, P. M.; Englund, D. R.

    2017-10-01

    Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of 10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.

  16. Synchrotron light sources and free-electron lasers accelerator physics, instrumentation and science applications

    CERN Document Server

    Khan, Shaukat; Schneider, Jochen; Hastings, Jerome

    2016-01-01

    Hardly any other discovery of the nineteenth century did have such an impact on science and technology as Wilhelm Conrad Röntgen’s seminal find of the X-rays. X-ray tubes soon made their way as excellent instruments for numerous applications in medicine, biology, materials science and testing, chemistry and public security. Developing new radiation sources with higher brilliance and much extended spectral range resulted in stunning developments like the electron synchrotron and electron storage ring and the freeelectron laser. This handbook highlights these developments in fifty chapters. The reader is given not only an inside view of exciting science areas but also of design concepts for the most advanced light sources. The theory of synchrotron radiation and of the freeelectron laser, design examples and the technology basis are presented. The handbook presents advanced concepts like seeding and harmonic generation, the booming field of Terahertz radiation sources and upcoming brilliant light sources dri...

  17. Experimental research on specific activity of 24Na using Chinese reference man phantom irradiated by 252Cf neutrons source

    International Nuclear Information System (INIS)

    Wang Yuexing; Yang Yifang; Lu Yongjie; Zhang Jianguo; Xing Hongchuan

    2011-01-01

    Objective: To investigate the specific activity of '2 4 Na per unit neutron fluence, A B/Φ ,in blood produced for Chinese reference man irradiated by 252 Cf neutron source,and to analyze the effects of scattering neutrons from ground,wall,and ceiling in irradiation site on it.Methods: A 252 Cf neutron source of 3×10 8 n/s and the anthropomorphic phantom were used for experiments. The phantom was made from 4 mm thick of outer covering by perspex and the liquid tissue-equivalent substitute in it. The data of phantom dimensions fit into Chinese reference man.The weight ratios of H, N, O and C in substitute equal from source to long axis of phantom were 1.1, 2.1, 3.1 and 4.1 m, respectively. Both the neutron source and the position of xiphisternum of the phantom were 1.6 m above the floor. Results: The average specific activity of 24 Na per unit neutron fluence was related to the irradiation-distances, d, and its maximum value, A B/ΦM , deduced by experimental data was about 1.85×10 -7 Bq·cm 2 ·g -1 . Conclusions: The A B/ΦM corresponds to that of phantom irradiated by plane-parallel beams, and the value is about more 3% than that by BOMAB phantom reported in literature. It has shown that floor-(wall-)scattered neutrons in irradiation site have significant contribution to the specific activity of 24 Na, but they contributed relatively little to the induced neutron doses. Consequently,using the specific activity of 24 Na for assessing accidental neutron doses received by an individual, the contribution of scattered neutrons in accident site will lead dose to be overestimated, and need to be correct. (authors)

  18. How Source Information Shapes Lay Interpretations of Science Conflicts: Interplay between Sourcing, Conflict Explanation, Source Evaluation, and Claim Evaluation

    Science.gov (United States)

    Thomm, Eva; Bromme, Rainer

    2016-01-01

    When laypeople read controversial scientific information in order to make a personally relevant decision, information on the source is a valuable resource with which to evaluate multiple, competing claims. Due to their bounded understanding, laypeople rely on the expertise of others and need to identify whether sources are credible. The present…

  19. A study of understanding: Alchemy, abstraction, and circulating reference in tertiary science education

    Science.gov (United States)

    Merritt, Brett W.

    Understanding is widely touted to be of paramount importance for education. This is especially true in science education research and development where understanding is heralded as one of the cornerstones of reform. Teachers are expected to teach for understanding and students are expected to learn with understanding. This dissertation is an empirical study of the concept of understanding. After analyzing various constructions of understanding in current U.S. education literature, I suggest that understanding is defined by five distinct features---they are knowledge (or knowledge base), coherence, transfer, extrapolation, and cognition--- and that these features are heavily informed and shaped by the psychological sciences. This relationship is neither good nor bad, I argue, but it means that teaching for and learning with understanding are not heavily informed and shaped by, for example, the natural sciences. Drawing from historical, philosophical, and anthropological perspectives of science, but especially from the work of Bruno Latour, I enact a radical revision(ing) of psychological notions such as "abstraction" and "transfer." The two main purposes of this re-visioning are (1) to draw critical attention to particular characteristics of a cognitive learning theory that emphasizes abstract concepts, and (2) to align many of the principles and tools used in science education more closely with those used in empirical scientific research. Finally, by bringing some examples of teaching and learning from an undergraduate biology classroom into conversation with both psychological and empirical practices and perspectives, I suggest that problematizing the current construction of understanding creates much needed room in mainstream science education for more empirical forms of learning and styles of teaching. A shift to such forms and styles, I conclude, should prove to be more inclusive and less constraining for both students and teachers.

  20. Alternative sources of pluripotency: science, ethics, and stem cells.

    Science.gov (United States)

    Kastenberg, Zachary J; Odorico, Jon S

    2008-07-01

    Despite many advances in human embryonic stem cell (hESC) technology the ethical dilemma involving the destruction of a human embryo is one factor that has limited the development of hESC based clinical therapies. Two recent reports describing the production of pluripotent stem cells following the in vitro reprogramming of human somatic cells with certain defined factors illustrate one potential method of bypassing the ethical debate surrounding hESCs (Yu J, Vodyanik MA, Smuga-Otto K, et al. Induced pluripotent stem cell lines derived from human somatic cells. Science. 2007 Dec;318(5858):1917-1920; Takahashi K, Tanabe K, Ohnuki M, et al. Induction of pluripotent stem cells from adult human fibroblasts by defined factors. Cell. 2007 Nov;131(5): 861-872.). Other alternative methods include nuclear transfer, altered nuclear transfer, and parthenogenesis; each with its own set of advantages and disadvantages. This review discusses recent advances in these technologies with specific focus on the issues of embryo destruction, oocyte recovery, and the potential of each technology to produce large scale, patient specific cell transplantation therapies that would require little or no immunosuppression.

  1. A simplified approach to estimating reference source terms for LWR designs

    International Nuclear Information System (INIS)

    1999-12-01

    systems. The publication of this IAEA technical document represents the conclusion of a task, initiated in 1996, devoted to the estimation of the radioactive source term in nuclear reactors. It focuses mainly on light water reactors (LWRs)

  2. Development of the neutron reference calibration field using a {sup 252}Cf standard source surrounded with PMMA moderators

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, T.; Kanai, K.; Tsujimura, N. [Japan Nuclear Cycle Development Institute, Ibaraki-ken (Japan)

    2002-07-01

    The authors developed the neutron reference calibration fields using a {sup 252} Cf standard source surrounded with PMMA moderators at the Japan Nuclear Cycle Development (JNC), Tokai Works. The moderators are co-axial, hollow cylinders made of lead-contained PMMA with a thickness of 13.5, 35.0, 59.5 and 77.0mm, and the {sup 252} Cf source is guided to the geometric center of moderators by the pneumatic system. These fields can provide the moderated neutron spectra very similar to those encountered around the globe-boxes of the fabrication process of MOX (PuO{sub 2}-UO{sub 2} mixed oxide) fuel. The neutron energy spectrum at the reference calibration point was evaluated from the calculations by MCNP4B and the measurements by the INS-type Bonner multi-sphere spectrometer and the hydrogen-filled proportional counters. The calculated neutron spectra were in good agreements with the measured ones. These fields were characterized in terms of the neutron fluence rate, spectral composition and ambient dose equivalent rate, and have served for the response-characterization of various neutron survey instruments.

  3. Development of the neutron reference calibration field using a 252Cf standard source surrounded with PMMA moderators

    International Nuclear Information System (INIS)

    Yoshida, T.; Kanai, K.; Tsujimura, N.

    2002-01-01

    The authors developed the neutron reference calibration fields using a 252 Cf standard source surrounded with PMMA moderators at the Japan Nuclear Cycle Development (JNC), Tokai Works. The moderators are co-axial, hollow cylinders made of lead-contained PMMA with a thickness of 13.5, 35.0, 59.5 and 77.0mm, and the 252 Cf source is guided to the geometric center of moderators by the pneumatic system. These fields can provide the moderated neutron spectra very similar to those encountered around the globe-boxes of the fabrication process of MOX (PuO 2 -UO 2 mixed oxide) fuel. The neutron energy spectrum at the reference calibration point was evaluated from the calculations by MCNP4B and the measurements by the INS-type Bonner multi-sphere spectrometer and the hydrogen-filled proportional counters. The calculated neutron spectra were in good agreements with the measured ones. These fields were characterized in terms of the neutron fluence rate, spectral composition and ambient dose equivalent rate, and have served for the response-characterization of various neutron survey instruments

  4. The Learning Outcomes of Mentoring Library Science Students in Virtual World Reference: A Case Study

    Science.gov (United States)

    Purpur, Geraldine; Morris, Jon Levi

    2015-01-01

    This article reports on the cognitive and affective development of students being mentored in virtual reference interview skills by professional librarians. The authors present a case study which examines the impact on student learning resulting from librarian mentor participation and collaboration with students on a course assignment. This study…

  5. A Short Course on Patent Reference for Science and Technology Librarians

    Science.gov (United States)

    Shackle, Linda

    2009-01-01

    Now that the full text of patents as well as patent searching tools are available for free on the Internet, every librarian who is responsible for assisting people with science and technology information should have a basic knowledge of this aspect of intellectual property. Whether a school librarian helping children discover the world of…

  6. Identification of Prospective Science Teachers' Mathematical-Logical Structures in Reference to Magnetism

    Science.gov (United States)

    Yilmaz, Ismail

    2014-01-01

    This paper is a qualitative case study designed to identify prospective science teachers' mathematical-logical structures on the basis of their knowledge and achievement levels in magnetism. The study also made an attempt to reveal the effects of knowledge-level variables and procedural variables, which were considered to be potential…

  7. The Neutron Science TeraGrid Gateway, a TeraGrid Science Gateway to Support the Spallation Neutron Source

    International Nuclear Information System (INIS)

    Cobb, John W.; Geist, Al; Kohl, James Arthur; Miller, Stephen D; Peterson, Peter F.; Pike, Gregory; Reuter, Michael A; Swain, William; Vazhkudai, Sudharshan S.; Vijayakumar, Nithya N.

    2006-01-01

    The National Science Foundation's (NSF's) Extensible Terascale Facility (ETF), or TeraGrid (1) is entering its operational phase. An ETF science gateway effort is the Neutron Science TeraGrid Gateway (NSTG.) The Oak Ridge National Laboratory (ORNL) resource provider effort (ORNL-RP) during construction and now in operations is bridging a large scale experimental community and the TeraGrid as a large-scale national cyberinfrastructure. Of particular emphasis is collaboration with the Spallation Neutron Source (SNS) at ORNL. The U.S. Department of Energy's (DOE's) SNS (2) at ORNL will be commissioned in spring of 2006 as the world's brightest source of neutrons. Neutron science users can run experiments, generate datasets, perform data reduction, analysis, visualize results; collaborate with remotes users; and archive long term data in repositories with curation services. The ORNL-RP and the SNS data analysis group have spent 18 months developing and exploring user requirements, including the creation of prototypical services such as facility portal, data, and application execution services. We describe results from these efforts and discuss implications for science gateway creation. Finally, we show incorporation into implementation planning for the NSTG and SNS architectures. The plan is for a primarily portal-based user interaction supported by a service oriented architecture for functional implementation

  8. Liquid Li based neutron source for BNCT and science application.

    Science.gov (United States)

    Horiike, H; Murata, I; Iida, T; Yoshihashi, S; Hoashi, E; Kato, I; Hashimoto, N; Kuri, S; Oshiro, S

    2015-12-01

    Liquid lithium (Li) is a candidate material for a target of intense neutron source, heat transfer medium in space engines and charges stripper. For a medical application of BNCT, epithermal neutrons with least energetic neutrons and γ-ray are required so as to avoid unnecessary doses to a patient. This is enabled by lithium target irradiated by protons at 2.5 MeV range, with utilizing the threshold reaction of (7)Li(p,n)(7)Be at 1.88 MeV. In the system, protons at 2.5 MeV penetrate into Li layer by 0.25 mm with dissipating heat load near the surface. To handle it, thin film flow of high velocity is important for stable operation. For the proton accelerator, electrostatic type of the Schnkel or the tandem is planned to be employed. Neutrons generated at 0.6 MeV are gently moderated to epithermal energy while suppressing accompanying γ-ray minimum by the dedicated moderator assembly. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. An open source, 3D printed preclinical MRI phantom for repeated measures of contrast agents and reference standards.

    Science.gov (United States)

    Cox, B L; Ludwig, K D; Adamson, E B; Eliceiri, K W; Fain, S B

    2018-03-01

    In medical imaging, clinicians, researchers and technicians have begun to use 3D printing to create specialized phantoms to replace commercial ones due to their customizable and iterative nature. Presented here is the design of a 3D printed open source, reusable magnetic resonance imaging (MRI) phantom, capable of flood-filling, with removable samples for measurements of contrast agent solutions and reference standards, and for use in evaluating acquisition techniques and image reconstruction performance. The phantom was designed using SolidWorks, a computer-aided design software package. The phantom consists of custom and off-the-shelf parts and incorporates an air hole and Luer Lock system to aid in flood filling, a marker for orientation of samples in the filled mode and bolt and tube holes for assembly. The cost of construction for all materials is under $90. All design files are open-source and available for download. To demonstrate utility, B 0 field mapping was performed using a series of gadolinium concentrations in both the unfilled and flood-filled mode. An excellent linear agreement (R 2 >0.998) was observed between measured relaxation rates (R 1 /R 2 ) and gadolinium concentration. The phantom provides a reliable setup to test data acquisition and reconstruction methods and verify physical alignment in alternative nuclei MRI techniques (e.g. carbon-13 and fluorine-19 MRI). A cost-effective, open-source MRI phantom design for repeated quantitative measurement of contrast agents and reference standards in preclinical research is presented. Specifically, the work is an example of how the emerging technology of 3D printing improves flexibility and access for custom phantom design.

  10. Middle School Students' Science Self-Efficacy and Its Sources: Examination of Gender Difference

    Science.gov (United States)

    Kıran, Dekant; Sungur, Semra

    2012-10-01

    The main purpose of the present study is to investigate middle school students' science self-efficacy as well as its sources and outcomes as a function of gender. Bandura's hypothesized sources of self-efficacy (i.e., mastery experience, vicarious experience, verbal persuasion, and emotional arousal) in addition to being inviting with self and inviting with others were examined as sources of self-efficacy, while cognitive and metacognitive strategy use was examined as an outcome of self-efficacy. A total of 1,932 students participated in the study and were administered self-report instruments. Results showed that the relationship between science self-efficacy and its proposed sources does not change as a function of gender. All proposed sources, except for vicarious experience, were found to be significantly related to students' scientific self-efficacy. Moreover, girls were found to experience significantly more emotional arousal and to send positive messages to others more than boys. On the other hand, no gender difference was found concerning science self-efficacy and strategy use. The findings also revealed a positive association between science self-efficacy and strategy use. Overall, findings supported Bandura's conception of self-efficacy and suggested invitations as additional sources of self-efficacy.

  11. Le Contrat Administratif Normatif - Source du Droit de la Science et de l’innovation

    Directory of Open Access Journals (Sweden)

    Victor Balmus

    2009-06-01

    Full Text Available Administrative law contract can serve as a basis both for subsequent completion ofadministrative regulations or individual, and the same type of contracts, becoming one of theconventional universal means of state administration, as well as acts as a means of overridingadministration state. Partnership Agreement between the Government and the Academy of Sciencesof Moldova is a genuine normative law contract and a conventional source of administrative lawsphere of science and innovation that ensure the competence of the Government delegation in theAcademy of Sciences of Moldova's sphere of science and innovation.

  12. Development and application of helicon plasma sources. Evolution of extensive plasma science

    International Nuclear Information System (INIS)

    Shinohara, Shunjiro

    2009-01-01

    Recent advances in plasma science are remarkable, and are deeply indebted to the development of sophisticated plasma sources. While numerous methods have been proposed for producing the plasma, helicon plasma sources, capable of generating high density (>10 13 cm -3 ) plasma with high ionization degree (>several ten percent) over a wide range of external control parameters, have been utilized in such broad areas as fundamental and processing plasmas, nuclear fusion, gas laser, modeling of space plasma, plasma acceleration/propulsion, among others. On the other hand, a number of important issues are left unsolved, in particular, those relevant to the wave phenomena and efficient plasma production. Solution to these issues are expected to play key roles in taking full advantage of the helicon plasma sources in the next generation. In this article, we overview our current understanding of the helicon plasma production and recent development of characteristic helicon plasma sources, and discuss possible future advancement of extensive plasma science utilizing them. (author)

  13. Comparative studies of Bhanumati and Nibandha Samgraha with special reference to Arista Vijnana (prognostic science)

    Science.gov (United States)

    Goswami, Pradip Kumar

    2011-01-01

    Ayurveda is serving the mankind for centuries with a holistic approach. This system has preached to treat the diseases which are only curable by the physicians. It has advised the physicians to strictly avoid treating the incurable diseases. In order to assess the incurability of the diseases or the incurable state of a patient; this system has preached the signs and symptoms of incurability which are known as arista-vijnana, which have been described in Brhattrayi of Ayurveda. Though Caraka has placed them in a separate section of his treatise, Cakrapani and Dalhana have also spent a considerable portion in their commentaries dealing with arista-vijnana. They were two renowned scholars who have commented with a depth of wisdom on Susruta Samhita. In this paper, the author has tried to present the comparative and critical comments of both commentators based on Bhanumati and Nibandha Samgraha, respectively, over arista-vijnana as described in Sutrasthana of Susruta Samhita. Dalhana was greatly influenced by Caraka Samhita with regard to the prognostic science. On the other hand, Cakrapani repeatedly recognized the superiority of the indriya-sthana of Caraka Samhita with regard to analysis of prognostic science. PMID:22408294

  14. Reference masses for precision mass spectrometry design and implementation of a Pierce geometry to the cluster Ion source at ISOLTRAP

    CERN Document Server

    Lommen, Jonathan

    At the mass spectrometer ISOLTRAP carbon clusters ($^{12}$Cn, 1$\\leqslant$n$\\leqslant$25) are provided as reference masses, which are of particular importance in higher mass ranges (m $\\geqslant$ 200u). In this mass range the measurlment uncertainty is increasingly dominated by the difference of the reference mass and the mass of the ion of interest. Using carbon clusters instead of the common $^{133}$Cs ions, this difference decreases. The carbon clusters are produced in a laser ion source which has been improved in the frame of this thesis. The fluctuations of the count rate have been investigated as a function of the laser energy. Furthermore, the energy density at the target has been increased by implementation of a telescope into the laser beam line, which leads to a more narrow energy distribution of the ions. Through the exact adjustment of timing and length of a pulsed cavity an energy range with constant count rate could be selected. In order to provide ideal starting conditions during and after the ...

  15. Crowd-sourcing as an analytical method: Metrology of smartphone measurements in heritage science.

    Science.gov (United States)

    Brigham, Rosie; Grau-Bove, Josep; Rudnicka, Anna; Cassar, May; Strlic, Matija

    2018-04-12

    This research assesses the precision, repeatability and accuracy of crowd-sourced scientific measurements, and whether their quality is sufficient to provide usable results. Measurements of colour and area were chosen because of the possibility of producing them with smartphone cameras. The quality of measurements was estimated experimentally by comparing data contributed by anonymous participants in heritage sites with reference measurements of known accuracy and precision. Participants performed the measurements by taking photographs with their smartphones, from which colour and dimensional data could be extracted. The results indicate that smartphone measurements provided by citizen-scientists can be used to measure changes of colour, but that the performance is strongly dependent on the measured colour coordinate and ranges from a minimum detectable colour change or difference between colours of ΔE 3.1 to ΔE 17.2. The same method is able to measure areas when the difference in colour with the neighbouring areas is higher than ΔE 10. These results render the method useful in some heritage science contexts, but higher precision would be desirable: the human eye can detect differences as small as ΔE 2, and a light-fast pigment fades approximately ΔE 8 in its lifetime. There is scope for further research in the automatization of the post-processing of user contributions and the effect of contextual factors (such as detail in the instructions) in the quality of the raw data. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. OpenSesame: An Open-source, Graphical Experiment Builder for the Social Sciences

    NARCIS (Netherlands)

    Mathot, S.; Schreij, D.B.B.; Theeuwes, J.

    2012-01-01

    In the present article, we introduce OpenSesame, a graphical experiment builder for the social sciences. OpenSesame is free, open-source, and cross-platform. It features a comprehensive and intuitive graphical user interface and supports Python scripting for complex tasks. Additional functionality,

  17. The Prevalence and Quality of Source Attribution in Middle and High School Science Papers

    Science.gov (United States)

    Vieyra, Michelle; Weaver, Kari

    2016-01-01

    Plagiarism is a commonly cited problem in higher education, especially in scientific writing and assignments for science courses. Students may not intentionally plagiarize, but may instead be confused about what proper source attribution entails. Much of this confusion likely stems from high school, either from lack of or inconsistent instruction…

  18. Synchrotron x-ray sources and new opportunities in the soil and environmental sciences

    International Nuclear Information System (INIS)

    Schulze, D.; Anderson, S.; Mattigod, S.

    1990-07-01

    This report contains the following papers: characteristics of the advanced photon source and comparison with existing synchrotron facilities; x-ray absorption spectroscopy: EXAFS and XANES -- A versatile tool to study the atomic and electronic structure of materials; applications of x-ray spectroscopy and anomalous scattering experiments in the soil and environmental sciences; X-ray fluorescence microprobe and microtomography

  19. Drawing and Writing in Digital Science Notebooks: Sources of Formative Assessment Data

    Science.gov (United States)

    Shelton, Angi; Smith, Andrew; Wiebe, Eric; Behrle, Courtney; Sirkin, Ruth; Lester, James

    2016-01-01

    Formative assessment strategies are used to direct instruction by establishing where learners' understanding is, how it is developing, informing teachers and students alike as to how they might get to their next set of goals of conceptual understanding. For the science classroom, one rich source of formative assessment data about scientific…

  20. Best Reference Practices are Not Observed in Telephone Ready Reference Services. A review of: Agosto, Denise A. and Holly Anderton. “Whatever Happened to ‘Always Cite the Source?’” Reference & User Services Quarterly 47.1 (2007: 44-54.

    Directory of Open Access Journals (Sweden)

    Julie McKenna

    2008-06-01

    Full Text Available Objective – To study source citing practice in telephone reference service in large public libraries in the United States and Canada. Design – Field simulation (unobtrusive testing.Setting – Large public libraries in the United States and Canada.Subjects – Telephone reference staff of the 25 largest public libraries in the United States and Canada.Methods – The 2005 World Book Almanac was used to select the 25 largest (in terms of population served public libraries in Canada and the United States. Each system’s Web site was checked to locate the telephone number for reference service. For some systems it was necessary to call the general telephone number for the main library or the first branch listed on the Web site. Five ready reference test questions were developed from a list of questions that students in a graduate library and information science course had previously asked of public library telephone reference services. The selected questions in the order that they were asked were: 1. Can you tell me when Valentine’s Day is?2. Who is the current governor/premier (of the state/province where the library is located?3. What is the population of Montana?4. In which state is the Southern Poverty Law Center (SPLC located?5. What is the French word for “chiropractor”?The authors called each of the 25 libraries during five consecutive weeks at different times of the business day. Each week, one question was asked; once an answer was received, no clarification was requested and the call was ended. The study reports the results of 125 reference transactions. For this study, the following definitions were used to assess complete citation for each type of information resource:• For a Web site – the complete URL (title and sponsor of the site not required.• For a digital database – the database title and the title and year of the specific item (author, publisher, page number not required.• For a print resource – the title

  1. Nutrimetabonomics:applications for nutritional sciences, with specific reference to gut microbial interactions.

    Science.gov (United States)

    Claus, Sandrine P; Swann, Jonathan R

    2013-01-01

    Understanding the role of the diet in determining human health and disease is one major objective of modern nutrition. Mammalian biocomplexity necessitates the incorporation of systems biology technologies into contemporary nutritional research. Metabonomics is a powerful approach that simultaneously measures the low-molecular-weight compounds in a biological sample, enabling the metabolic status of a biological system to be characterized. Such biochemical profiles contain latent information relating to inherent parameters, such as the genotype, and environmental factors, including the diet and gut microbiota. Nutritional metabonomics, or nutrimetabonomics, is being increasingly applied to study molecular interactions between the diet and the global metabolic system. This review discusses three primary areas in which nutrimetabonomics has enjoyed successful application in nutritional research: the illumination of molecular relationships between nutrition and biochemical processes; elucidation of biomarker signatures of food components for use in dietary surveillance; and the study of complex trans-genomic interactions between the mammalian host and its resident gut microbiome. Finally, this review illustrates the potential for nutrimetabonomics in nutritional science as an indispensable tool to achieve personalized nutrition.

  2. The use of Banyumas traditional art as analog sources of elementary school science materials

    Science.gov (United States)

    Handayani, L.; Nugroho, S. E.; Rohidi, T. R.; Wiyanto

    2018-03-01

    All various traditional arts of Banyumas area support this area to be one famous region located in the periphery of West and Central Java with its unique cultural identity. In science learning, these traditional arts are very important aspect which can be implemented as a source of analog by students thinking a science concept analogically. This paper discusses a kind of Banyumas traditional art: the ebeg, and its cultural characteristics which can play a significant role in supporting elementary school students’ analogical thinking of a science material. The method used were literature and documentary studies. It is concluded that the ebeg provides many cultural characteristics which can be used as analog of elementary school science material, in terms of its music player’s motion, kinds of musical instruments played and its dancer motion.

  3. Auscope: Australian Earth Science Information Infrastructure using Free and Open Source Software

    Science.gov (United States)

    Woodcock, R.; Cox, S. J.; Fraser, R.; Wyborn, L. A.

    2013-12-01

    Since 2005 the Australian Government has supported a series of initiatives providing researchers with access to major research facilities and information networks necessary for world-class research. Starting with the National Collaborative Research Infrastructure Strategy (NCRIS) the Australian earth science community established an integrated national geoscience infrastructure system called AuScope. AuScope is now in operation, providing a number of components to assist in understanding the structure and evolution of the Australian continent. These include the acquisition of subsurface imaging , earth composition and age analysis, a virtual drill core library, geological process simulation, and a high resolution geospatial reference framework. To draw together information from across the earth science community in academia, industry and government, AuScope includes a nationally distributed information infrastructure. Free and Open Source Software (FOSS) has been a significant enabler in building the AuScope community and providing a range of interoperable services for accessing data and scientific software. A number of FOSS components have been created, adopted or upgraded to create a coherent, OGC compliant Spatial Information Services Stack (SISS). SISS is now deployed at all Australian Geological Surveys, many Universities and the CSIRO. Comprising a set of OGC catalogue and data services, and augmented with new vocabulary and identifier services, the SISS provides a comprehensive package for organisations to contribute their data to the AuScope network. This packaging and a variety of software testing and documentation activities enabled greater trust and notably reduced barriers to adoption. FOSS selection was important, not only for technical capability and robustness, but also for appropriate licensing and community models to ensure sustainability of the infrastructure in the long term. Government agencies were sensitive to these issues and Au

  4. Psychological Distress and Sources of Stressors amongst Medical and Science Undergraduate Students in Malaysia

    Directory of Open Access Journals (Sweden)

    Ali S Radeef

    2017-08-01

    Full Text Available Background: This study aims to compare the prevalence of psychological distress between medical and science undergraduate students and to assess the sources of stressors that are attributing to it. Methods: A sample of 697 undergraduate students participated in this study, in which 501 were medical students and the remaining 196 were Science students. Psychological distress was assessed using the 12-item General Health Questionnaire. The students were given a list of possible sources of stress which were chosen depending on previous studies. Results: The overall prevalence of psychological distress was 32.6%. Science students showed a significantly higher rate and mean score of psychological distress than medical students, and the mean score was significantly higher during the clinical phase rather than the pre-clinical phase in medical students. Overall, female students had a significantly higher mean score than males, however although the mean score was higher in females it was only significant in the pre-clinical phase. In addition to academic and psychological stressors, factors such as reduced holidays, lack of time for relaxation, and limitation of leisure/entertainment time were among the top ten stressors reported by the students. Conclusions: Psychological distress is common among university students, and it is higher among science students than medical students. Academic and psychological factors can be considered as sources of stressors which may precipitate psychological distress among college students.

  5. EPOS Multi-Scale Laboratory platform: a long-term reference tool for experimental Earth Sciences

    Science.gov (United States)

    Trippanera, Daniele; Tesei, Telemaco; Funiciello, Francesca; Sagnotti, Leonardo; Scarlato, Piergiorgio; Rosenau, Matthias; Elger, Kirsten; Ulbricht, Damian; Lange, Otto; Calignano, Elisa; Spiers, Chris; Drury, Martin; Willingshofer, Ernst; Winkler, Aldo

    2017-04-01

    With continuous progress on scientific research, a large amount of datasets has been and will be produced. The data access and sharing along with their storage and homogenization within a unique and coherent framework is a new challenge for the whole scientific community. This is particularly emphasized for geo-scientific laboratories, encompassing the most diverse Earth Science disciplines and typology of data. To this aim the "Multiscale Laboratories" Work Package (WP16), operating in the framework of the European Plate Observing System (EPOS), is developing a virtual platform of geo-scientific data and services for the worldwide community of laboratories. This long-term project aims at merging the top class multidisciplinary laboratories in Geoscience into a coherent and collaborative network, facilitating the standardization of virtual access to data, data products and software. This will help our community to evolve beyond the stage in which most of data produced by the different laboratories are available only within the related scholarly publications (often as print-version only) or they remain unpublished and inaccessible on local devices. The EPOS multi-scale laboratory platform will provide the possibility to easily share and discover data by means of open access, DOI-referenced, online data publication including long-term storage, managing and curation services and to set up a cohesive community of laboratories. The WP16 is starting with three pilot cases laboratories: (1) rock physics, (2) palaeomagnetic, and (3) analogue modelling. As a proof of concept, first analogue modelling datasets have been published via GFZ Data Services (http://doidb.wdc-terra.org/search/public/ui?&sort=updated+desc&q=epos). The datasets include rock analogue material properties (e.g. friction data, rheology data, SEM imagery), as well as supplementary figures, images and movies from experiments on tectonic processes. A metadata catalogue tailored to the specific communities

  6. Proposal to DOE Basic Energy Sciences: Ultrafast X-ray science facility at the Advanced Light Source

    International Nuclear Information System (INIS)

    Schoenlein, Robert W.; Falcone, Roger W.; Abela, R.; Alivisatos, A.P.; Belkacem, A.; Berrah, N.; Bozek, J.; Bressler, C.; Cavalleri, A.; Chergui, M.; Glover, T.E.; Heimann, P.A.; Hepburn, J.; Larsson, J.; Lee, R.W.; McCusker, J.; Padmore, H.A.; Pattison, P.; Pratt, S.T.; Shank, C.V.; Wark, J.; Chang, Z.; Robin, D.W.; Schlueter, R.D.; Zholents, A.A.; Zolotorev, M.S.

    2001-01-01

    We propose to develop a true user facility for ultrafast x-ray science at the Advanced Light Source. This facility will be unique in the world, and will fill a critical need for the growing ultrafast x-ray research community. The development of this facility builds upon the expertise from long-standing research efforts in ultrafast x-ray spectroscopy and the development of femtosecond x-ray sources and techniques at both the Lawrence Berkeley National Laboratory and at U.C. Berkeley. In particular, the technical feasibility of a femtosecond x-ray beamline at the ALS has already been demonstrated, and existing ultrafast laser technology will enable such a beamline to operate near the practical limit for femtosecond x-ray flux and brightness from a 3rd generation synchrotron

  7. Proposal to DOE Basic Energy Sciences: Ultrafast X-ray science facility at the Advanced Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Schoenlein, Robert W.; Falcone, Roger W.; Abela, R.; Alivisatos, A.P.; Belkacem, A.; Berrah, N.; Bozek, J.; Bressler, C.; Cavalleri, A.; Chergui, M.; Glover, T.E.; Heimann, P.A.; Hepburn, J.; Larsson, J.; Lee, R.W.; McCusker, J.; Padmore, H.A.; Pattison, P.; Pratt, S.T.; Shank, C.V.; Wark, J.; Chang, Z.; Robin, D.W.; Schlueter, R.D.; Zholents, A.A.; Zolotorev, M.S.

    2001-12-12

    We propose to develop a true user facility for ultrafast x-ray science at the Advanced Light Source. This facility will be unique in the world, and will fill a critical need for the growing ultrafast x-ray research community. The development of this facility builds upon the expertise from long-standing research efforts in ultrafast x-ray spectroscopy and the development of femtosecond x-ray sources and techniques at both the Lawrence Berkeley National Laboratory and at U.C. Berkeley. In particular, the technical feasibility of a femtosecond x-ray beamline at the ALS has already been demonstrated, and existing ultrafast laser technology will enable such a beamline to operate near the practical limit for femtosecond x-ray flux and brightness from a 3rd generation synchrotron.

  8. Proposal to DOE Basic Energy Sciences Ultrafast X-ray science facility at the Advanced Light Source

    CERN Document Server

    Schönlein, R W; Alivisatos, A P; Belkacem, A; Berrah, N; Bozek, J; Bressler, C; Cavalleri, A; Chang, Z; Chergui, M; Falcone, R W; Glover, T E; Heimann, P A; Hepburn, J; Larsson, J; Lee, R W; McCusker, J; Padmore, H A; Pattison, P; Pratt, S T; Robin, D W; Schlüter, Ross D; Shank, C V; Wark, J; Zholents, A A; Zolotorev, M S

    2001-01-01

    We propose to develop a true user facility for ultrafast x-ray science at the Advanced Light Source. This facility will be unique in the world, and will fill a critical need for the growing ultrafast x-ray research community. The development of this facility builds upon the expertise from long-standing research efforts in ultrafast x-ray spectroscopy and the development of femtosecond x-ray sources and techniques at both the Lawrence Berkeley National Laboratory and at U.C. Berkeley. In particular, the technical feasibility of a femtosecond x-ray beamline at the ALS has already been demonstrated, and existing ultrafast laser technology will enable such a beamline to operate near the practical limit for femtosecond x-ray flux and brightness from a 3rd generation synchrotron.

  9. Evaluation of the uniformity of wide circular reference source and application of correction factors; Avaliação da uniformidade de fonte extensa de referência circular e aplicação de fatores de correção

    Energy Technology Data Exchange (ETDEWEB)

    Silva Junior, I.A.; Xavier, M.; Siqueira, P.T.D.; Sordi, G.A.A.; Potiens, M.P.A., E-mail: iremarjr@gmail.com [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

    2017-07-01

    In this work the uniformity of wide circular reference sources is evaluated. This kind of reference source is still widely used in Brazil. In previous works wide rectangular reference sources were analyzed and it was shown the importance of the application of correction factors in calibration procedures of radiation monitors. Now a transposition of the methods used formerly is performed, evaluating the uniformities of circular reference sources and calculating the associated correction factors. (author)

  10. Free and Open Source Software for Geospatial in the field of planetary science

    Science.gov (United States)

    Frigeri, A.

    2012-12-01

    Information technology applied to geospatial analyses has spread quickly in the last ten years. The availability of OpenData and data from collaborative mapping projects increased the interest on tools, procedures and methods to handle spatially-related information. Free Open Source Software projects devoted to geospatial data handling are gaining a good success as the use of interoperable formats and protocols allow the user to choose what pipeline of tools and libraries is needed to solve a particular task, adapting the software scene to his specific problem. In particular, the Free Open Source model of development mimics the scientific method very well, and researchers should be naturally encouraged to take part to the development process of these software projects, as this represent a very agile way to interact among several institutions. When it comes to planetary sciences, geospatial Free Open Source Software is gaining a key role in projects that commonly involve different subjects in an international scenario. Very popular software suites for processing scientific mission data (for example, ISIS) and for navigation/planning (SPICE) are being distributed along with the source code and the interaction between user and developer is often very strict, creating a continuum between these two figures. A very widely spread library for handling geospatial data (GDAL) has started to support planetary data from the Planetary Data System, and recent contributions enabled the support to other popular data formats used in planetary science, as the Vicar one. The use of Geographic Information System in planetary science is now diffused, and Free Open Source GIS, open GIS formats and network protocols allow to extend existing tools and methods developed to solve Earth based problems, also to the case of the study of solar system bodies. A day in the working life of a researcher using Free Open Source Software for geospatial will be presented, as well as benefits and

  11. SU-E-T-284: Revisiting Reference Dosimetry for the Model S700 Axxent 50 KV{sub p} Electronic Brachytherapy Source

    Energy Technology Data Exchange (ETDEWEB)

    Hiatt, JR [Rhode Island Hospital, Providence, RI (United States); Rivard, MJ [Tufts University School of Medicine, Boston, MA (United States)

    2014-06-01

    Purpose: The model S700 Axxent electronic brachytherapy source by Xoft was characterized in 2006 by Rivard et al. The source design was modified in 2006 to include a plastic centering insert at the source tip to more accurately position the anode. The objectives of the current study were to establish an accurate Monte Carlo source model for simulation purposes, to dosimetrically characterize the new source and obtain its TG-43 brachytherapy dosimetry parameters, and to determine dose differences between the source with and without the centering insert. Methods: Design information from dissected sources and vendor-supplied CAD drawings were used to devise the source model for radiation transport simulations of dose distributions in a water phantom. Collision kerma was estimated as a function of radial distance, r, and polar angle, θ, for determination of reference TG-43 dosimetry parameters. Simulations were run for 10{sup 10} histories, resulting in statistical uncertainties on the transverse plane of 0.03% at r=1 cm and 0.08% at r=10 cm. Results: The dose rate distribution the transverse plane did not change beyond 2% between the 2006 model and the current study. While differences exceeding 15% were observed near the source distal tip, these diminished to within 2% for r>1.5 cm. Differences exceeding a factor of two were observed near θ=150° and in contact with the source, but diminished to within 20% at r=10 cm. Conclusions: Changes in source design influenced the overall dose rate and distribution by more than 2% over a third of the available solid angle external from the source. For clinical applications using balloons or applicators with tissue located within 5 cm from the source, dose differences exceeding 2% were observed only for θ>110°. This study carefully examined the current source geometry and presents a modern reference TG-43 dosimetry dataset for the model S700 source.

  12. VGI, crowd-sourcing, citizen science and neogeography are not the same!

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2015-11-01

    Full Text Available StreetMap Real-time traffic monitoring Brown Moses Arab Spring Cyber-bullying Foldit Online Protein Puzzle SETI@Home Amateur astronomer Zooniverse: Planet Hunters Mappiness WideNoise 2nd South African Bird Atlas Project (SABAP2) Household consumption diary...SMS PPGIS ABCD Transparency and accountability Empower communities Brown Moses Virtual land art Cyber-bullying Crisis mapping Arab Spring Neogeography © CSIR 2015 Crowd sourcing ≠ Ciscience Crowd sourcing Amazon Mechanical Turk Wikipedia Brown Moses...

  13. Time-resolved materials science opportunities using synchrotron x-ray sources

    International Nuclear Information System (INIS)

    Larson, B.C.; Tischler, J.Z.

    1995-06-01

    The high brightness, high intensity, and pulsed time-structure of synchrotron sources provide new opportunities for time-resolved x-ray diffraction investigations. With third generation synchrotron sources coming on line, high brilliance and high brightness are now available in x-ray beams with the highest flux. In addition to the high average flux, the instantaneous flux available in synchrotron beams is greatly enhanced by the pulsed time structure, which consists of short bursts of x-rays that are separated by ∼tens to hundreds of nanoseconds. Time-resolved one- and two-dimensional position sensitive detection techniques that take advantage of synchrotron radiation for materials science x-ray diffraction investigations are presented, and time resolved materials science applications are discussed in terms of recent diffraction and spectroscopy results and materials research opportunities

  14. The Atomic, Molecular and Optical Science instrument at the Linac Coherent Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Ferguson, Ken R. [Linac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Department of Applied Physics, Stanford University, 348 Via Pueblo, Stanford, CA 94305 (United States); Bucher, Maximilian; Bozek, John D.; Carron, Sebastian; Castagna, Jean-Charles [Linac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Coffee, Ryan [Linac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Pulse Institute, Stanford University and SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Curiel, G. Ivan; Holmes, Michael; Krzywinski, Jacek; Messerschmidt, Marc; Minitti, Michael; Mitra, Ankush; Moeller, Stefan; Noonan, Peter; Osipov, Timur; Schorb, Sebastian; Swiggers, Michele; Wallace, Alexander; Yin, Jing [Linac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Bostedt, Christoph, E-mail: bostedt@slac.stanford.edu [Linac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Pulse Institute, Stanford University and SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States)

    2015-04-17

    A description of the Atomic, Molecular and Optical Sciences (AMO) instrument at the Linac Coherent Light Source is presented. Recent scientific highlights illustrate the imaging, time-resolved spectroscopy and high-power density capabilities of the AMO instrument. The Atomic, Molecular and Optical Science (AMO) instrument at the Linac Coherent Light Source (LCLS) provides a tight soft X-ray focus into one of three experimental endstations. The flexible instrument design is optimized for studying a wide variety of phenomena requiring peak intensity. There is a suite of spectrometers and two photon area detectors available. An optional mirror-based split-and-delay unit can be used for X-ray pump–probe experiments. Recent scientific highlights illustrate the imaging, time-resolved spectroscopy and high-power density capabilities of the AMO instrument.

  15. Data Science: History repeated? - The heritage of the Free and Open Source GIS community

    Science.gov (United States)

    Löwe, Peter; Neteler, Markus

    2014-05-01

    Data Science is described as the process of knowledge extraction from large data sets by means of scientific methods. The discipline draws heavily from techniques and theories from many fields, which are jointly used to furthermore develop information retrieval on structured or unstructured very large datasets. While the term Data Science was already coined in 1960, the current perception of this field places is still in the first section of the hype cycle according to Gartner, being well en route from the technology trigger stage to the peak of inflated expectations. In our view the future development of Data Science could benefit from the analysis of experiences from related evolutionary processes. One predecessor is the area of Geographic Information Systems (GIS). The intrinsic scope of GIS is the integration and storage of spatial information from often heterogeneous sources, data analysis, sharing of reconstructed or aggregated results in visual form or via data transfer. GIS is successfully applied to process and analyse spatially referenced content in a wide and still expanding range of science areas, spanning from human and social sciences like archeology, politics and architecture to environmental and geoscientific applications, even including planetology. This paper presents proven patterns for innovation and organisation derived from the evolution of GIS, which can be ported to Data Science. Within the GIS landscape, three strategic interacting tiers can be denoted: i) Standardisation, ii) applications based on closed-source software, without the option of access to and analysis of the implemented algorithms, and iii) Free and Open Source Software (FOSS) based on freely accessible program code enabling analysis, education and ,improvement by everyone. This paper focuses on patterns gained from the synthesis of three decades of FOSS development. We identified best-practices which evolved from long term FOSS projects, describe the role of community

  16. Applications of pulsed energy sources and hydrodynamic response to materials science

    International Nuclear Information System (INIS)

    Perry, F.; Nelson, W.

    1993-01-01

    The dynamic response of materials to pulsed, relativistic electron beams was studied for materials science applications over two decades ago. Presently, intense light ion beams are being explored for materials science applications. These include the Ion Beam Surface Treatment (IBEST) of materials for producing stronger and more corrosion-resistant materials and the evaporative deposition of polycrystalline thin films. Laser sources are also being extensively utilized as pulsed energy sources in medical science and in clinical applications. In particular, laser-tissue interactions are being investigated for laser angioplasty and surgery as well as cancer therapy. The understanding of the energy deposition and hydrodynamic response of a wide range of materials is essential to the success of these applications. In order to address these materials science applications, the authors are utilizing and developing high quality, energy deposition-hydrodynamic code techniques which can aid in the design and interpretation of experiments. Consequently, the authors strongly encourage the development of 3-dimensional, species-selective diagnostic techniques, e.g. Resonant Holographic Interferometry Spectroscopy (RHIS), to be used in analyzing the ablation plume in the thin film deposition experiments. In this presentation they show the results and discuss the limitations of calculations for these materials applications. They also discuss the status of the RHIS diagnostic

  17. Isotope ratio mass spectrometry as a tool for source inference in forensic science: A critical review.

    Science.gov (United States)

    Gentile, Natacha; Siegwolf, Rolf T W; Esseiva, Pierre; Doyle, Sean; Zollinger, Kurt; Delémont, Olivier

    2015-06-01

    Isotope ratio mass spectrometry (IRMS) has been used in numerous fields of forensic science in a source inference perspective. This review compiles the studies published on the application of isotope ratio mass spectrometry (IRMS) to the traditional fields of forensic science so far. It completes the review of Benson et al. [1] and synthesises the extent of knowledge already gathered in the following fields: illicit drugs, flammable liquids, human provenancing, microtraces, explosives and other specific materials (packaging tapes, safety matches, plastics, etc.). For each field, a discussion assesses the state of science and highlights the relevance of the information in a forensic context. Through the different discussions which mark out the review, the potential and limitations of IRMS, as well as the needs and challenges of future studies are emphasized. The paper elicits the various dimensions of the source which can be obtained from the isotope information and demonstrates the transversal nature of IRMS as a tool for source inference. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  18. Methylobacterium genome sequences: a reference blueprint to investigate microbial metabolism of C1 compounds from natural and industrial sources.

    Science.gov (United States)

    Vuilleumier, Stéphane; Chistoserdova, Ludmila; Lee, Ming-Chun; Bringel, Françoise; Lajus, Aurélie; Zhou, Yang; Gourion, Benjamin; Barbe, Valérie; Chang, Jean; Cruveiller, Stéphane; Dossat, Carole; Gillett, Will; Gruffaz, Christelle; Haugen, Eric; Hourcade, Edith; Levy, Ruth; Mangenot, Sophie; Muller, Emilie; Nadalig, Thierry; Pagni, Marco; Penny, Christian; Peyraud, Rémi; Robinson, David G; Roche, David; Rouy, Zoé; Saenampechek, Channakhone; Salvignol, Grégory; Vallenet, David; Wu, Zaining; Marx, Christopher J; Vorholt, Julia A; Olson, Maynard V; Kaul, Rajinder; Weissenbach, Jean; Médigue, Claudine; Lidstrom, Mary E

    2009-01-01

    Methylotrophy describes the ability of organisms to grow on reduced organic compounds without carbon-carbon bonds. The genomes of two pink-pigmented facultative methylotrophic bacteria of the Alpha-proteobacterial genus Methylobacterium, the reference species Methylobacterium extorquens strain AM1 and the dichloromethane-degrading strain DM4, were compared. The 6.88 Mb genome of strain AM1 comprises a 5.51 Mb chromosome, a 1.26 Mb megaplasmid and three plasmids, while the 6.12 Mb genome of strain DM4 features a 5.94 Mb chromosome and two plasmids. The chromosomes are highly syntenic and share a large majority of genes, while plasmids are mostly strain-specific, with the exception of a 130 kb region of the strain AM1 megaplasmid which is syntenic to a chromosomal region of strain DM4. Both genomes contain large sets of insertion elements, many of them strain-specific, suggesting an important potential for genomic plasticity. Most of the genomic determinants associated with methylotrophy are nearly identical, with two exceptions that illustrate the metabolic and genomic versatility of Methylobacterium. A 126 kb dichloromethane utilization (dcm) gene cluster is essential for the ability of strain DM4 to use DCM as the sole carbon and energy source for growth and is unique to strain DM4. The methylamine utilization (mau) gene cluster is only found in strain AM1, indicating that strain DM4 employs an alternative system for growth with methylamine. The dcm and mau clusters represent two of the chromosomal genomic islands (AM1: 28; DM4: 17) that were defined. The mau cluster is flanked by mobile elements, but the dcm cluster disrupts a gene annotated as chelatase and for which we propose the name "island integration determinant" (iid). These two genome sequences provide a platform for intra- and interspecies genomic comparisons in the genus Methylobacterium, and for investigations of the adaptive mechanisms which allow bacterial lineages to acquire methylotrophic

  19. Science Outreach and the Religious Public: The Source Makes All the Difference

    Science.gov (United States)

    Davidson, G. R.; Hill, C.; Wolgemuth, K.

    2017-12-01

    Public resistance to well established scientific understanding has been a persistent problem in the US. Decades of improved educational materials, upgraded K-12 standards, and several successful court battles to curb anti-science influences did little to change the percentage of Americans resistant to even considering the evidence for subjects such as evolution or ancient Earth history. Research in the social sciences suggests that one reason has been a failure to recognize the importance of the source of information. Studies have documented that people are more receptive to challenging viewpoints when the advocate (the source) is recognized as a member of their own group or "tribe." The personal worldview or group-identity of an expert can determine how willing an audience is to consider the argument, much more so than the expert's scientific credentials. For a religious audience, this means that the quality of educational materials and the strength of an argument may be irrelevant if delivered by someone known to be dismissive of fundamental religious beliefs. In contrast, significant inroads have been realized with the religious public when scientists of faith have taken a pro-science message to members of their own religious affiliations. Encouraging stories are coming from outreach efforts of organizations and programs such as BioLogos, American Scientific Affiliation, Solid Rock Lectures, and AAAS Dialogue on Science, Ethics, and Religion. Secular scientists interested in outreach can benefit greatly by keeping a short list of resources (blogs, books, speakers) by religious scientists advocating for the legitimacy of modern science, or by directly teaming with scientists of faith. A recent example from our own efforts includes an 11 author book, The Grand Canyon, Monument to an Ancient Earth, aimed primarily at the Christian public to explain why Noah's flood does not explain the planet's complex geology. Eight authors are Christians and three are not.

  20. A DNA barcode library of the beetle reference collection (Insecta: Coleoptera in the National Science Museum, Korea

    Directory of Open Access Journals (Sweden)

    Sang Woo Jung

    2016-06-01

    Full Text Available Coleoptera is a group of insects that are most diverse among insect resources. Although used as indicator species and applied in developing new drugs, it is difficult to identify them quickly. Since the development of a method using mitochondrial DNA information for identification, studies have been conducted in Korea to swiftly and accurately identify species. The National Science Museum of Korea (NSMK has been collecting and morphologically identifying domestic reference insects since 2013, and building a database of DNA barcodes with digital images. The NSMK completed construction of a database of digital images and DNA barcodes of 60 beetle species in the Korean National Research Information System. A total of 179 specimens and 60 species were used for the analysis, and the averages of intraspecific and interspecific variations were 0.70±0.45% and 26.34±6.01%, respectively, with variation rates ranging from 0% to 1.45% and 9.83% to 56.23%, respectively.

  1. Methylobacterium genome sequences: a reference blueprint to investigate microbial metabolism of C1 compounds from natural and industrial sources.

    Directory of Open Access Journals (Sweden)

    Stéphane Vuilleumier

    Full Text Available Methylotrophy describes the ability of organisms to grow on reduced organic compounds without carbon-carbon bonds. The genomes of two pink-pigmented facultative methylotrophic bacteria of the Alpha-proteobacterial genus Methylobacterium, the reference species Methylobacterium extorquens strain AM1 and the dichloromethane-degrading strain DM4, were compared.The 6.88 Mb genome of strain AM1 comprises a 5.51 Mb chromosome, a 1.26 Mb megaplasmid and three plasmids, while the 6.12 Mb genome of strain DM4 features a 5.94 Mb chromosome and two plasmids. The chromosomes are highly syntenic and share a large majority of genes, while plasmids are mostly strain-specific, with the exception of a 130 kb region of the strain AM1 megaplasmid which is syntenic to a chromosomal region of strain DM4. Both genomes contain large sets of insertion elements, many of them strain-specific, suggesting an important potential for genomic plasticity. Most of the genomic determinants associated with methylotrophy are nearly identical, with two exceptions that illustrate the metabolic and genomic versatility of Methylobacterium. A 126 kb dichloromethane utilization (dcm gene cluster is essential for the ability of strain DM4 to use DCM as the sole carbon and energy source for growth and is unique to strain DM4. The methylamine utilization (mau gene cluster is only found in strain AM1, indicating that strain DM4 employs an alternative system for growth with methylamine. The dcm and mau clusters represent two of the chromosomal genomic islands (AM1: 28; DM4: 17 that were defined. The mau cluster is flanked by mobile elements, but the dcm cluster disrupts a gene annotated as chelatase and for which we propose the name "island integration determinant" (iid.These two genome sequences provide a platform for intra- and interspecies genomic comparisons in the genus Methylobacterium, and for investigations of the adaptive mechanisms which allow bacterial lineages to acquire

  2. Is popular radio a source of exposure to alcohol references in mid to later life? A content analysis.

    Science.gov (United States)

    Haighton, C; Halligan, J; Scott, S

    2017-04-20

    There is concern around alcohol consumption in mid to later life yet little understanding about what influences this behaviour. No previous research has explored the extent to which adults in mid to later life may be exposed to alcohol references in the media. This project aimed to determine the frequency of alcohol references on radio stations with a high proportion of listeners in mid to later life. Content analysis of alcohol references on four popular UK music-based radio stations with a high proportion of listeners aged 55-64 years over three time points. Alcohol references occur frequently, but vary by time of year and type of radio station. When alcohol is mentioned its consumption is portrayed as the norm, without negative consequences. On three commercial stations, the majority of mentions came from advertising, whereas on BBC Radio 2 nearly all references were talk-based. All adverts for direct promotion of alcohol were by supermarkets. Alcohol was frequently associated with celebrations, socializing or something to consume for its own sake. Adults in the age group 55-64 may be exposed to references to alcohol that could serve to reinforce norms of consumption of alcohol and promote purchases of cheap alcohol. © The Author 2017. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  3. Computing Pathways in Bio-Models Derived from Bio-Science Text Sources

    DEFF Research Database (Denmark)

    Andreasen, Troels; Bulskov, Henrik; Nilsson, Jørgen Fischer

    2015-01-01

    This paper outlines a system, OntoScape, serving to accomplish complex inference tasks on knowledge bases and bio-models derived from life-science text corpora. The system applies so-called natural logic, a form of logic which is readable for humans. This logic affords ontological representations...... of complex terms appearing in the text sources. Along with logical propositions, the system applies a semantic graph representation facilitating calculation of bio-pathways. More generally, the system aords means of query answering appealing to general and domain specic inference rules....

  4. Differentiating the Sources of Taiwanese High School Students' Multidimensional Science Learning Self-Efficacy: An Examination of Gender Differences

    Science.gov (United States)

    Lin, Tzung-Jin; Tsai, Chin-Chung

    2017-04-01

    The main purpose of this study was to investigate Taiwanese high school students' multi-dimensional self-efficacy and its sources in the domain of science. Two instruments, Sources of Science Learning Self-Efficacy (SSLSE) and Science Learning Self-Efficacy (SLSE), were used. By means of correlation and regression analyses, the relationships between students' science learning self-efficacy and the sources of their science learning self-efficacy were examined. The findings revealed that the four sources of the students' self-efficacy were found to play significant roles in their science learning self-efficacy. By and large, Mastery Experience and Vicarious Experience were found to be the two salient influencing sources. Several gender differences were also revealed. For example, the female students regarded Social Persuasion as the most influential source in the "Science Communication" dimension, while the male students considered Vicarious Experience as the main efficacy source. Physiological and Affective States, in particular, was a crucial antecedent of the female students' various SLSE dimensions, including "Conceptual Understanding," "Higher-Order Cognitive Skills," and "Science Communication." In addition, the variations between male and female students' responses to both instruments were also unraveled. The results suggest that, first, the male students perceived themselves as having more mastery experience, vicarious experience and social persuasion than their female counterparts. Meanwhile, the female students experienced more negative emotional arousal than the male students. Additionally, the male students were more self-efficacious than the females in the five SLSE dimensions of "Conceptual Understanding," "Higher-Order Cognitive Skills," "Practical Work," "Everyday Application," and "Science Communication."

  5. Differentiating the Sources of Taiwanese High School Students' Multidimensional Science Learning Self-Efficacy: An Examination of Gender Differences

    Science.gov (United States)

    Lin, Tzung-Jin; Tsai, Chin-Chung

    2018-06-01

    The main purpose of this study was to investigate Taiwanese high school students' multi-dimensional self-efficacy and its sources in the domain of science. Two instruments, Sources of Science Learning Self-Efficacy (SSLSE) and Science Learning Self-Efficacy (SLSE), were used. By means of correlation and regression analyses, the relationships between students' science learning self-efficacy and the sources of their science learning self-efficacy were examined. The findings revealed that the four sources of the students' self-efficacy were found to play significant roles in their science learning self-efficacy. By and large, Mastery Experience and Vicarious Experience were found to be the two salient influencing sources. Several gender differences were also revealed. For example, the female students regarded Social Persuasion as the most influential source in the "Science Communication" dimension, while the male students considered Vicarious Experience as the main efficacy source. Physiological and Affective States, in particular, was a crucial antecedent of the female students' various SLSE dimensions, including "Conceptual Understanding," "Higher-Order Cognitive Skills," and "Science Communication." In addition, the variations between male and female students' responses to both instruments were also unraveled. The results suggest that, first, the male students perceived themselves as having more mastery experience, vicarious experience and social persuasion than their female counterparts. Meanwhile, the female students experienced more negative emotional arousal than the male students. Additionally, the male students were more self-efficacious than the females in the five SLSE dimensions of "Conceptual Understanding," "Higher-Order Cognitive Skills," "Practical Work," "Everyday Application," and "Science Communication."

  6. Next-Generation Photon Sources for Grand Challenges in Science and Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-05-01

    The next generation of sustainable energy technologies will revolve around transformational new materials and chemical processes that convert energy efficiently among photons, electrons, and chemical bonds. New materials that tap sunlight, store electricity, or make fuel from splitting water or recycling carbon dioxide will need to be much smarter and more functional than today's commodity-based energy materials. To control and catalyze chemical reactions or to convert a solar photon to an electron requires coordination of multiple steps, each carried out by customized materials and interfaces with designed nanoscale structures. Such advanced materials are not found in nature the way we find fossil fuels; they must be designed and fabricated to exacting standards, using principles revealed by basic science. Success in this endeavor requires probing, and ultimately controlling, the interactions among photons, electrons, and chemical bonds on their natural length and time scales. Control science - the application of knowledge at the frontier of science to control phenomena and create new functionality - realized through the next generation of ultraviolet and X-ray photon sources, has the potential to be transformational for the life sciences and information technology, as well as for sustainable energy. Current synchrotron-based light sources have revolutionized macromolecular crystallography. The insights thus obtained are largely in the domain of static structure. The opportunity is for next generation light sources to extend these insights to the control of dynamic phenomena through ultrafast pump-probe experiments, time-resolved coherent imaging, and high-resolution spectroscopic imaging. Similarly, control of spin and charge degrees of freedom in complex functional materials has the potential not only to reveal the fundamental mechanisms of high-temperature superconductivity, but also to lay the foundation for future generations of information science. This

  7. Applications of the Advanced Light Source to problems in the earth, soil, and environmental sciences report of the workshop

    International Nuclear Information System (INIS)

    1992-10-01

    This report discusses the following topics: ALS status and research opportunities; advanced light source applications to geological materials; applications in the soil and environmental sciences; x-ray microprobe analysis; potential applications of the ALS in soil and environmental sciences; and x-ray spectroscopy using soft x-rays: applications to earth materials

  8. To implement REX today: why? How? References for an event-related return on experience as a source of learning

    International Nuclear Information System (INIS)

    Bringaud, Violaine; Fayolle, Patrice; Madec, Veronique; Gauthereau, Vincent; Raud, Geraldine; Hernandez, Guillaume; Vautier, Jean-Francois; Le Roy, Guilhem; Maffre, Jean-Francois; Pichancourt, Isabelle; Rousseau, Jean-Marie

    2014-01-01

    The REX (Return on Experience) is an arrangement which is supposed to allow lessons to be learned from dysfunctions occurring during activities in nuclear installations. This report, written by a work group, proposes a synthesis of some references regarding REX arrangements, and aims at deepening the discussion and at the evolution of these arrangements. It presents the different components of a REX arrangement, and outlines its operational objectives: to understand, to share and to act. It highlights the conditions for an efficient REX arrangement: definition of an event, analysis methods, analysis abilities, management approaches, corrective actions, and so on. It indicates how to use this document and some useful references

  9. Modeling Sources of Teaching Self-Efficacy for Science, Technology, Engineering, and Mathematics Graduate Teaching Assistants.

    Science.gov (United States)

    DeChenne, Sue Ellen; Koziol, Natalie; Needham, Mark; Enochs, Larry

    2015-01-01

    Graduate teaching assistants (GTAs) in science, technology, engineering, and mathematics (STEM) have a large impact on undergraduate instruction but are often poorly prepared to teach. Teaching self-efficacy, an instructor's belief in his or her ability to teach specific student populations a specific subject, is an important predictor of teaching skill and student achievement. A model of sources of teaching self-efficacy is developed from the GTA literature. This model indicates that teaching experience, departmental teaching climate (including peer and supervisor relationships), and GTA professional development (PD) can act as sources of teaching self-efficacy. The model is pilot tested with 128 GTAs from nine different STEM departments at a midsized research university. Structural equation modeling reveals that K-12 teaching experience, hours and perceived quality of GTA PD, and perception of the departmental facilitating environment are significant factors that explain 32% of the variance in the teaching self-efficacy of STEM GTAs. This model highlights the important contributions of the departmental environment and GTA PD in the development of teaching self-efficacy for STEM GTAs. © 2015 S. E. DeChenne et al. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  10. Source of stressors and emotional disturbances among undergraduate science students in Malaysia

    Directory of Open Access Journals (Sweden)

    Ali Sabri Radeef, Ghasak Ghazi Faisal, Syed Masroor Ali, MaungKoHajee Mohamed Ismail

    2014-04-01

    Full Text Available Introduction: Higher education is considered as a stressful period in students’ life which they have to cope with since they are facing a variety of demands such as living away from their families, a heavily loaded curriculum, and inefficiency in both mentor- mentee and health education programs. This will make them more vulnerable to emotional disturbances such as stress, anxiety and depression. Methodology: A total of 194 undergraduate students from Kulliyyah (Faculty of Science, International Islamic University Malaysia participated in questionnaire-based study using the Depression Anxiety, Stress Scale (DASS-21 to assess the severity of emotional disturbances Results: The overall prevalence of depression, anxiety and stress was 64.4%, 84.5% and 56.7% respectively. Regarding the severity of the symptoms, it was found that 13.9%, 51.5 % and 12.9% of the students have clinically significant depression, anxiety and stress respectively. Young students aged 21 years and below had a statistically significant association with depression, anxiety and stress. While first year students had significant association with depression. Regarding the source of stressors, the top ten stressors decided by the students were mainly academic and personal factors. Conclusion: Emotional disturbances in the form of depression, anxiety and stress are existing in high rate among undergraduate science students that require early intervention. Factors including feeling of incompetence, lack of motivation to learn and difficulty of class work can be considered as source of stressors that may precipitate for depression anxiety and stress.

  11. Sources of information influencing the state-of-the-science gap in hormone replacement therapy usage.

    Directory of Open Access Journals (Sweden)

    Fiona Chew

    Full Text Available Medical reviews and research comprise a key information source for news media stories on medical therapies and innovations as well as for physicians in updating their practice. The present study examined medical review journal articles, physician surveys and news media coverage of hormone replacement therapy (HT to assess the relationship between the three information sources and whether/if they contributed to a state-of-the-science gap (a condition when the evaluation of a medical condition or therapy ascertained by the highest standards of investigation is incongruent with the science-in-practice such as physician recommendations and patient actions.We content-analyzed 177 randomly sampled HT medical reviews between 2002 and 2014, and HT news valence in three major TV networks, newspapers and magazines/internet sites in 2002-2003, 2008-2009 and 2012-14. The focus in both analyses was whether HT benefits outweighed risks, risks outweighed benefits or both risks and benefits were presented. We also qualitatively content-analyzed all 19 surveys of US physicians' HT recommendations from 2002 to 2009, and 2012 to 2014.Medical reviews yielded a mixed picture about HT (40.1% benefits, 26.0% risks, and 33.9% both benefits and risks. While a majority of physician surveys were pro-HT 10/19, eight showed varied attitudes and one was negative. Newspaper and television coverage reflected a pro and con balance while magazine stories were more positive in the later reporting period.Medical journal review articles, physicians, and media reports all provide varying view points towards hormone therapy use thus leading to limited knowledge about the actual risks and benefits of HT among peri- and menopausal women and a state-of-the-science gap.

  12. Pika: A snow science simulation tool built using the open-source framework MOOSE

    Science.gov (United States)

    Slaughter, A.; Johnson, M.

    2017-12-01

    The Department of Energy (DOE) is currently investing millions of dollars annually into various modeling and simulation tools for all aspects of nuclear energy. An important part of this effort includes developing applications based on the open-source Multiphysics Object Oriented Simulation Environment (MOOSE; mooseframework.org) from Idaho National Laboratory (INL).Thanks to the efforts of the DOE and outside collaborators, MOOSE currently contains a large set of physics modules, including phase-field, level set, heat conduction, tensor mechanics, Navier-Stokes, fracture and crack propagation (via the extended finite-element method), flow in porous media, and others. The heat conduction, tensor mechanics, and phase-field modules, in particular, are well-suited for snow science problems. Pika--an open-source MOOSE-based application--is capable of simulating both 3D, coupled nonlinear continuum heat transfer and large-deformation mechanics applications (such as settlement) and phase-field based micro-structure applications. Additionally, these types of problems may be coupled tightly in a single solve or across length and time scales using a loosely coupled Picard iteration approach. In addition to the wide range of physics capabilities, MOOSE-based applications also inherit an extensible testing framework, graphical user interface, and documentation system; tools that allow MOOSE and other applications to adhere to nuclear software quality standards. The snow science community can learn from the nuclear industry and harness the existing effort to build simulation tools that are open, modular, and share a common framework. In particular, MOOSE-based multiphysics solvers are inherently parallel, dimension agnostic, adaptive in time and space, fully coupled, and capable of interacting with other applications. The snow science community should build on existing tools to enable collaboration between researchers and practitioners throughout the world, and advance the

  13. 75 FR 65494 - Award of Three Single-Source Expansion Supplements to The University of Colorado Health Sciences...

    Science.gov (United States)

    2010-10-25

    ... Single-Source Expansion Supplements to The University of Colorado Health Sciences Center in Aurora, CO...), Administration on Developmental Disabilities (ADD) has awarded three single-source expansion supplements for data... people with intellectual and developmental disabilities in all facets of community life. The University...

  14. Social.Water--Open Source Citizen Science Software for CrowdHydrology

    Science.gov (United States)

    Fienen, M. N.; Lowry, C.

    2013-12-01

    CrowdHydrology is a crowd-sourced citizen science project in which passersby near streams are encouraged to read a gage and send an SMS (text) message with the water level to a number indicated on a sign. The project was initially started using free services such as Google Voice, Gmail, and Google Maps to acquire and present the data on the internet. Social.Water is open-source software, using Python and JavaScript, that automates the acquisition, categorization, and presentation of the data. Open-source objectives pervade both the project and the software as the code is hosted at Github, only free scripting codes are used, and any person or organization can install a gage and join the CrowdHydrology network. In the first year, 10 sites were deployed in upstate New York, USA. In the second year, expansion to 44 sites throughout the upper Midwest USA was achieved. Comparison with official USGS and academic measurements have shown low error rates. Citizen participation varies greatly from site to site, so surveys or other social information is sought for insight into why some sites experience higher rates of participation than others.

  15. D1-3: Marshfield Dictionary of Clinical and Translational Science (MD-CTS): An Online Reference for Clinical and Translational Science Terminology

    Science.gov (United States)

    Finamore, Joe; Ray, William; Kadolph, Chris; Rastegar-Mojarad, Majid; Ye, Zhan; Jacqueline, Bohne; Tachinardi, Umberto; Mendonça, Eneida; Finnegan, Brian; Bartkowiak, Barbara; Weichelt, Bryan; Lin, Simon

    2014-01-01

    Background/Aims New terms are rapidly appearing in the literature and practice of clinical medicine and translational research. To catalog real-world usage of medical terms, we report the first construction of an online dictionary of clinical and translational medicinal terms, which are computationally generated in near real-time using a big data approach. This project is NIH CTSA-funded and developed by the Marshfield Clinic Research Foundation in conjunction with University of Wisconsin - Madison. Currently titled Marshfield Dictionary of Clinical and Translational Science (MD-CTS), this application is a Google-like word search tool. By entering a term into the search bar, MD-CTS will display that term’s definition, usage examples, contextual terms, related images, and ontological information. A prototype is available for public viewing at http://spellchecker.mfldclin.edu/. Methods We programmatically derived the lexicon for MD-CTS from scholarly communications by parsing through 15,156,745 MEDLINE abstracts and extracting all of the unique words found therein. We then ran this list through several filters in order to remove words that were not relevant for searching, such as common English words and numeric expressions. We then loaded the resulting 1,795,769 terms into SQL tables. Each term is cross-referenced with every occurrence in all abstracts in which it was found. Additional information is aggregated from Wiktionary, Bioportal, and Wikipedia in real-time and displayed on-screen. From this lexicon we created a supplemental dictionary resource (updated quarterly) to be used in Microsoft Office® products. Results We evaluated the utility of MD-CTS by creating a list of 100 words derived from recent clinical and translational medicine publications in the week of July 22, 2013. We then performed comparative searches for each term with Taber’s Cyclopedic Medical Dictionary, Stedman’s Medical Dictionary, Dorland’s Illustrated Medical Dictionary, Medical

  16. The Majority of Library Clients Still Use Person-to-Person Interaction When Asking Reference Questions. A review of: De Groote, Sandra L. “Questions Asked at the Virtual and Physical Health Sciences Reference Desk: How Do They Compare and What Do They Tell Us?” Medical Reference Services Quarterly 24.2 (Summer 2005: 11-23.

    Directory of Open Access Journals (Sweden)

    Suzanne Pamela Lewis

    2006-03-01

    Full Text Available Objective - To identify similarities and difference in the questions asked at the virtual and physical refernece desks of a helath scienmces library, in order to better undertand user needs and highlight areas for service improvement. Also to retrospectively analyze reference statistics collected over the previous six years. Design - Use study; retrospective study of reference statistics for the period July 1997 to June 2003; literature review. Setting - Large academic helath sciences library in the United States. Subjects - All questions asked at the reference and information desks, plus questions submitted to the University-wide virtual reference service and answered by a health sciences librarian, over a period of one month. The questions were asked by faculty, staff, students and members of the public. Methods - A literature review was carried out to examine the types of information/reference questions typically asked in health sciences libraries both before and after the mass introduction of remote end-user searching of online resources and the establishment of virtual reference services. Next, the reference statistics collected at the University of Illinois at Chicage (UIC Library of the Health Sciences between July 1997 and June 2003 were examined. For most of this period a digital reference service was offered using a listserv address to which patrons would submit email queries. Beginning in March 2003, a formal virtual reference service (chat and email was provided using commercial software. Finally, data was gathered on questions answered by a health sciences librarians, and clients who asked the question, at either the physical or cirtual reference desk, during the month of November 2003 at the UIC Library of the Health Sciences. Library staff completed an online survey form for each question, and if a client asked more than one question, each question was coded individually. Data included: status of client using the service (faculty

  17. Laser-driven electron beam and radiation sources for basic, medical and industrial sciences

    Science.gov (United States)

    NAKAJIMA, Kazuhisa

    2015-01-01

    To date active research on laser-driven plasma-based accelerators have achieved great progress on production of high-energy, high-quality electron and photon beams in a compact scale. Such laser plasma accelerators have been envisaged bringing a wide range of applications in basic, medical and industrial sciences. Here inheriting the groundbreaker’s review article on “Laser Acceleration and its future” [Toshiki Tajima, (2010)],1) we would like to review recent progress of producing such electron beams due to relativistic laser-plasma interactions followed by laser wakefield acceleration and lead to the scaling formulas that are useful to design laser plasma accelerators with controllability of beam energy and charge. Lastly specific examples of such laser-driven electron/photon beam sources are illustrated. PMID:26062737

  18. Modeling, analysis, and design of stationary reference frame droop controlled parallel three-phase voltage source inverters

    DEFF Research Database (Denmark)

    Vasquez, Juan Carlos; Guerrero, Josep M.; Savaghebi, Mehdi

    2013-01-01

    Power electronics based MicroGrids consist of a number of voltage source inverters (VSIs) operating in parallel. In this paper, the modeling, control design, and stability analysis of parallel connected three-phase VSIs are derived. The proposed voltage and current inner control loops and the mat......Power electronics based MicroGrids consist of a number of voltage source inverters (VSIs) operating in parallel. In this paper, the modeling, control design, and stability analysis of parallel connected three-phase VSIs are derived. The proposed voltage and current inner control loops...... control restores the frequency and amplitude deviations produced by the primary control. Also, a synchronization algorithm is presented in order to connect the MicroGrid to the grid. Experimental results are provided to validate the performance and robustness of the parallel VSI system control...

  19. The position of the individual gods and goddesses in various types of sources - with special reference to the female divinities

    Directory of Open Access Journals (Sweden)

    Else Mundal

    1990-01-01

    Full Text Available In the written sources the gods are arranged in a patriarchal family structure with Odin on the top. If we try to rank the gods in order of precedence on the basis of the number of instances in the toponymic material, Odin would be found a good way down the list. Generally, we should expect gods connected with the cult of fertility and the agricultural society to be overrepresented in the toponymic material in comparison with a god of war. If we consider our literary sources and ask which of the goddesses' names are most frequently used as basic words in kenningar for women, we see that many of the more "unknown" goddesses are very well represented in this material. In the toponymic material, it was the leading goddess who was considered to be the leading god's wife, but not necessarily. Both Frigg and Freyja belong to the type of fertility goddess.

  20. Evaluation of mixed-source, low-template DNA profiles in forensic science.

    Science.gov (United States)

    Balding, David J

    2013-07-23

    Enhancements in sensitivity now allow DNA profiles to be obtained from only tens of picograms of DNA, corresponding to a few cells, even for samples subject to degradation from environmental exposure. However, low-template DNA (LTDNA) profiles are subject to stochastic effects, such as "dropout" and "dropin" of alleles, and highly variable stutter peak heights. Although the sensitivity of the newly developed methods is highly appealing to crime investigators, courts are concerned about the reliability of the underlying science. High-profile cases relying on LTDNA evidence have collapsed amid controversy, including the case of Hoey in the United Kingdom and the case of Knox and Sollecito in Italy. I argue that rather than the reliability of the science, courts and commentators should focus on the validity of the statistical methods of evaluation of the evidence. Even noisy DNA evidence can be more powerful than many traditional types of evidence, and it can be helpful to a court as long as its strength is not overstated. There have been serious shortcomings in statistical methods for the evaluation of LTDNA profile evidence, however. Here, I propose a method that allows for multiple replicates with different rates of dropout, sporadic dropins, different amounts of DNA from different contributors, relatedness of suspected and alternate contributors, "uncertain" allele designations, and degradation. R code implementing the method is open source, facilitating wide scrutiny. I illustrate its good performance using real cases and simulated crime scene profiles.

  1. Moderator design studies for a new neutron reference source based on the D–T fusion reaction

    International Nuclear Information System (INIS)

    Mozhayev, Andrey V.; Piper, Roman K.; Rathbone, Bruce A.; McDonald, Joseph C.

    2016-01-01

    The radioactive isotope Californium-252 ( 252 Cf) is relied upon internationally as a neutron calibration source for ionizing radiation dosimetry because of its high specific activity. The source may be placed within a heavy-water (D 2 O) moderating sphere to produce a softened spectrum representative of neutron fields common to commercial nuclear power plant environments, among others. Due to termination of the U.S. Department of Energy loan/lease program in 2012, the expense of obtaining 252 Cf sources has undergone a significant increase, rendering high output sources largely unattainable. On the other hand, the use of neutron generators in research and industry applications has increased dramatically in recent years. Neutron generators based on deuteriumtritium (D–T) fusion reaction provide high neutron fluence rates and, therefore, could possibly be used as a replacement for 252 Cf. To be viable, the 14 MeV D–T output spectrum must be significantly moderated to approximate common workplace environments. This paper presents the results of an effort to select appropriate moderating materials and design a configuration to reshape the primary neutron field toward a spectrum approaching that from a nuclear power plant workplace. A series of Monte-Carlo (MCNP) simulations of single layer high- and low-Z materials are used to identify initial candidate moderators. Candidates are refined through a similar series of simulations involving combinations of 2–5 different materials. The simulated energy distribution using these candidate moderators are rated in comparison to a target spectrum. Other properties, such as fluence preservation and/or enhancement, prompt gamma production and other characteristics are also considered. - Highlights: • D–T generator neutron calibration field replacement for D 2 O-moderated 252 Cf. • Determination of representative nuclear power plant workplace neutron spectrum. • Simulations to assess moderating materials to soften 14

  2. Superradiant terahertz sources and their applications in accelerator diagnostics and ultra-fast science

    Energy Technology Data Exchange (ETDEWEB)

    Green, Bertram

    2017-04-28

    The terahertz (THz) frequency range lies between the frequency range of radio and infrared. The exact limits are not well defined and depend on the scientific community. The most recent ''2017 Terahertz Science and Technology Roadmap'' sets the THz frequency range to between 0.1 and 30 THz. The development of suitable detectors, detection techniques, and sources for this frequency range has seen tremendous progress over the past decade. The arrival of commercial femtosecond (fs) laser systems has enabled new, background-free THz time domain spectroscopy, and both laser-driven and accelerator-driven THz sources are currently producing pulse energies in the μJ, and even mJ, range. This thesis describes the characterization of a new class of accelerator-based light sources, which open up opportunities to provide a unique combination of high pulse energies and high repetition rates. The foreseen applications of these types of sources, coined ''superradiant THz sources'', lie in the area of time-resolved (nonlinear) spectroscopy. One of the first results of this thesis is the observation that the THz pulses from the prototype facility TELBE exhibit large pulse-to-pulse fluctuations in arrivaltime and intensity. These types of instabilities render the intended applications of TELBE for real-world nonlinear THz spectroscopy experiments impossible. As part of this thesis a pulse resolved data acquisition and analysis scheme has therefore been devised which enables the correction of these instabilities and now allows performance of time-resolved THz spectroscopy measurements with sub-30 femtosecond (fs) (FHWM) time resolution with excellent dynamic range up to 106. The thesis is organized as follows: the first chapter introduces the fundamental principles and techniques utilized in this work. The second chapter presents the results, starting with the diagnostic developments, followed by a thorough characterization of the THz source

  3. Modeling Sources of Teaching Self-Efficacy for Science, Technology, Engineering, and Mathematics Graduate Teaching Assistants

    Science.gov (United States)

    DeChenne, Sue Ellen; Koziol, Natalie; Needham, Mark; Enochs, Larry

    2015-01-01

    Graduate teaching assistants (GTAs) in science, technology, engineering, and mathematics (STEM) have a large impact on undergraduate instruction but are often poorly prepared to teach. Teaching self-efficacy, an instructor’s belief in his or her ability to teach specific student populations a specific subject, is an important predictor of teaching skill and student achievement. A model of sources of teaching self-efficacy is developed from the GTA literature. This model indicates that teaching experience, departmental teaching climate (including peer and supervisor relationships), and GTA professional development (PD) can act as sources of teaching self-efficacy. The model is pilot tested with 128 GTAs from nine different STEM departments at a midsized research university. Structural equation modeling reveals that K–12 teaching experience, hours and perceived quality of GTA PD, and perception of the departmental facilitating environment are significant factors that explain 32% of the variance in the teaching self-efficacy of STEM GTAs. This model highlights the important contributions of the departmental environment and GTA PD in the development of teaching self-efficacy for STEM GTAs. PMID:26250562

  4. Analysis and lessons learned instituting an instant messaging reference service at an academic health sciences library: the first year.

    Science.gov (United States)

    Kipnis, Daniel G; Kaplan, Gary E

    2008-01-01

    In February 2006, Thomas Jefferson University went live with a new instant messaging (IM) service. This paper reviews the first 102 transcripts to examine question types and usage patterns. In addition, the paper highlights lessons learned in instituting the service. IM reference represents a small proportion of reference questions, but based on user feedback and technological improvements, the library has decided to continue the service.

  5. Modeling, analysis, and design of stationary reference frame droop controlled parallel three-phase voltage source inverters

    DEFF Research Database (Denmark)

    Vasquez, Juan Carlos; Guerrero, Josep M.; Savaghebi, Mehdi

    2011-01-01

    and discussed. Experimental results are provided to validate the performance and robustness of the VSIs functionality during Islanded and grid-connected operations, allowing a seamless transition between these modes through control hierarchies by regulating frequency and voltage, main-grid interactivity......Power electronics based microgrids consist of a number of voltage source inverters (VSIs) operating in parallel. In this paper, the modeling, control design, and stability analysis of three-phase VSIs are derived. The proposed voltage and current inner control loops and the mathematical models...

  6. An open source approach to enable the reproducibility of scientific workflows in the ocean sciences

    Science.gov (United States)

    Di Stefano, M.; Fox, P. A.; West, P.; Hare, J. A.; Maffei, A. R.

    2013-12-01

    Every scientist should be able to rerun data analyses conducted by his or her team and regenerate the figures in a paper. However, all too often the correct version of a script goes missing, or the original raw data is filtered by hand and the filtering process is undocumented, or there is lack of collaboration and communication among scientists working in a team. Here we present 3 different use cases in ocean sciences in which end-to-end workflows are tracked. The main tool that is deployed to address these use cases is based on a web application (IPython Notebook) that provides the ability to work on very diverse and heterogeneous data and information sources, providing an effective way to share the and track changes to source code used to generate data products and associated metadata, as well as to track the overall workflow provenance to allow versioned reproducibility of a data product. Use cases selected for this work are: 1) A partial reproduction of the Ecosystem Status Report (ESR) for the Northeast U.S. Continental Shelf Large Marine Ecosystem. Our goal with this use case is to enable not just the traceability but also the reproducibility of this biannual report, keeping track of all the processes behind the generation and validation of time-series and spatial data and information products. An end-to-end workflow with code versioning is developed so that indicators in the report may be traced back to the source datasets. 2) Realtime generation of web pages to be able to visualize one of the environmental indicators from the Ecosystem Advisory for the Northeast Shelf Large Marine Ecosystem web site. 3) Data and visualization integration for ocean climate forecasting. In this use case, we focus on a workflow to describe how to provide access to online data sources in the NetCDF format and other model data, and make use of multicore processing to generate video animation from time series of gridded data. For each use case we show how complete workflows

  7. Reliability of published data on radionuclide half lives - relevance to the use of reference sources for checking instrument performance

    International Nuclear Information System (INIS)

    Waldock, P.M.

    1999-01-01

    Long-lived calibrated radioisotopes are frequently used for checking of instrumentation used in the measurement of radiation; examples include: radioisotope assay meters, radiation monitors and sample counting equipment. In 1986 we purchased a radioisotope calibrator (Capintec CRC120) which was supplied with a number of long-lived check sources by the manufacturer, one of which was barium-133. The source came with its own calibration certificate and a quoted half life of 10.74 years ± 0.05 years, traceable to the National Bureau of Standards in the USA, and is consistent with data published by the National Nuclear Data Center, Brookhaven National Laboratory in 1985 (Tuli 1985). However, we noted at the time that this is significantly different to the value of 7.2 years quoted in the Radiochemical Manual (Wilson 1966) published by the Radiochemical Centre, Amersham (now Nycomed-Amersham), and more recently we have noted that it is significantly different to the value of 10.53 years currently quoted on various Internet sites including the University of Sheffield Chemistry Department (Winter 1999). Further investigation showed similar or worse variations of published half lives with time for several radioisotopes. Letter-to-the-editor

  8. The international face of sports science through the window of the Journal of Sports Sciences--with a special reference to kinanthropometry.

    Science.gov (United States)

    Reilly, Thomas

    2008-02-15

    The history of the Journal of Sports Sciences is traced from the antecedents of its initiation to the current time. The developments of the sports sciences at large are reflected in the content of the journal. Its links with the international agenda are described, and related to landmark publications. Special attention is given to the relationships with international bodies, the International Society for Advancement of Kinanthropometry and the World Commission of Science and Sports. The expansion of sport and exercise sciences, both nationally and internationally, was reflected in the increased frequency of publication of the journal. Key areas in the kinanthropometric content are identified and placed in context. The review culminates in the highlighting of likely areas for future research.

  9. Augmenting the Funding Sources for Space Science and the ASTRO-1 Space Telescope

    Science.gov (United States)

    Morse, Jon

    2015-08-01

    (ART), to which international scientists are invited to apply. The ART will be tasked with anchoring the science case, optimizing the observatory design, and constructing a design reference mission during late-2015 and 2016.

  10. Science Self-Efficacy in the Primary Classroom: Using Mixed Methods to Investigate Sources of Self-Efficacy

    Science.gov (United States)

    Webb-Williams, Jane

    2017-04-01

    Self-efficacy has been shown to influence student engagement, effort and performance as well as course selection and future career choice. Extending our knowledge regarding the development of self-efficacy has important implications for educators and for those concerned about the international uptake of science careers. Previous research has identified four sources that may contribute towards self-efficacy: mastery experiences, vicarious experiences, verbal persuasion and physiological/affective states. Very little research has been conducted within the school environment that looks at the formation of these sources and yet early school experiences have been posited to be a key factor in girls' lack of engagement in post compulsory science education. This paper investigates children's self-efficacy beliefs in science and reports on findings from mixed method research conducted with 182 children aged between 10 and 12 years. Classroom data were collected through focus groups, individual interviews and surveys. Findings revealed that although girls and boys held similar levels of academic performance in science, many girls underestimated their capability. The four sources of self-efficacy identified by Bandura (1997) plus self-regulation as an additional source, were evident in the children's descriptions, with boys being more influenced by mastery experience and girls by a combination of vicarious experience and physiological/affective states. Girl's appraisal of information appeared to operate through a heuristic process whereby girls disregarded salient information such as teacher feedback in favour of reliance on social comparison. Contextual factors were identified. Implications for science teachers are discussed.

  11. submitter BioSharing: curated and crowd-sourced metadata standards, databases and data policies in the life sciences

    CERN Document Server

    McQuilton, Peter; Rocca-Serra, Philippe; Thurston, Milo; Lister, Allyson; Maguire, Eamonn; Sansone, Susanna-Assunta

    2016-01-01

    BioSharing (http://www.biosharing.org) is a manually curated, searchable portal of three linked registries. These resources cover standards (terminologies, formats and models, and reporting guidelines), databases, and data policies in the life sciences, broadly encompassing the biological, environmental and biomedical sciences. Launched in 2011 and built by the same core team as the successful MIBBI portal, BioSharing harnesses community curation to collate and cross-reference resources across the life sciences from around the world. BioSharing makes these resources findable and accessible (the core of the FAIR principle). Every record is designed to be interlinked, providing a detailed description not only on the resource itself, but also on its relations with other life science infrastructures. Serving a variety of stakeholders, BioSharing cultivates a growing community, to which it offers diverse benefits. It is a resource for funding bodies and journal publishers to navigate the metadata landscape of the ...

  12. Health Information Needs and Reliability of Sources Among Nondegree Health Sciences Students: A Prerequisite for Designing eHealth Literacy.

    Science.gov (United States)

    Haruna, Hussein; Tshuma, Ndumiso; Hu, Xiao

    Understanding health information needs and health-seeking behavior is a prerequisite for developing an electronic health information literacy (EHIL) or eHealth literacy program for nondegree health sciences students. At present, interest in researching health information needs and reliable sources paradigms has gained momentum in many countries. However, most studies focus on health professionals and students in higher education institutions. The present study was aimed at providing new insight and filling the existing gap by examining health information needs and reliability of sources among nondegree health sciences students in Tanzania. A cross-sectional study was conducted in 15 conveniently selected health training institutions, where 403 health sciences students were participated. Thirty health sciences students were both purposely and conveniently chosen from each health-training institution. The selected students were pursuing nursing and midwifery, clinical medicine, dentistry, environmental health sciences, pharmacy, and medical laboratory sciences courses. Involved students were either in their first year, second year, or third year of study. Health sciences students' health information needs focus on their educational requirements, clinical practice, and personal information. They use print, human, and electronic health information. They lack eHealth research skills in navigating health information resources and have insufficient facilities for accessing eHealth information, a lack of specialists in health information, high costs for subscription electronic information, and unawareness of the availability of free Internet and other online health-related databases. This study found that nondegree health sciences students have limited skills in EHIL. Thus, designing and incorporating EHIL skills programs into the curriculum of nondegree health sciences students is vital. EHIL is a requirement common to all health settings, learning environments, and

  13. ALA Library Schools and Subject Reference Coursework: A Short Communication

    Science.gov (United States)

    Condic, Kristine

    2016-01-01

    Reference librarians are exposed to the literature of different disciplines in a number of ways including advanced degrees, on the job training, and intellectual inquisitiveness. As students, many reference librarians were also exposed to library science programs offering coursework specializing in information sources and research within other…

  14. Reference values for spirometry and their use in test interpretation: A Position Statement from the Australian and New Zealand Society of Respiratory Science.

    Science.gov (United States)

    Brazzale, Danny; Hall, Graham; Swanney, Maureen P

    2016-10-01

    Traditionally, spirometry testing tended to be confined to the realm of hospital-based laboratories but is now performed in a variety of health care settings. Regardless of the setting in which the test is conducted, the fundamental basis of spirometry is that the test is both performed and interpreted according to the international standards. The purpose of this Australian and New Zealand Society of Respiratory Science (ANZSRS) statement is to provide the background and recommendations for the interpretation of spirometry results in clinical practice. This includes the benchmarking of an individual's results to population reference data, as well as providing the platform for a statistically and conceptually based approach to the interpretation of spirometry results. Given the many limitations of older reference equations, it is imperative that the most up-to-date and relevant reference equations are used for test interpretation. Given this, the ANZSRS recommends the adoption of the Global Lung Function Initiative (GLI) 2012 spirometry reference values throughout Australia and New Zealand. The ANZSRS also recommends that interpretation of spirometry results is based on the lower limit of normal from the reference values and the use of Z-scores where available. © 2016 The Authors. Respirology published by John Wiley & Sons Australia, Ltd on behalf of Asian Pacific Society of Respirology.

  15. Serological study of Human Fasciolosis in Patients Referring to the School of Public Health, Tehran University of Medical Sciences, Tehran, Iran during 2008-2014.

    Science.gov (United States)

    Aryaeipour, Mojgan; Kia, Eshrat Beigom; Heidari, Zahra; Sayyad Talaie, Zahra; Rokni, Mohammad Bagher

    2015-01-01

    Fascioliasis is a zoonotic disease of livestock and human caused by Fasciola species. Here in, the results of serological evaluation of fascioliasis in people referring to the School of Public Health, Tehran University of Medical Sciences during 2008-2014 are presented. Demographic characterizations, symptoms and eosinophil rate were registered for every patient. Using somatic antigen of Fasciola, ELISA was performed and the results were analyzed. Data of questioners were analyzed as well. Among 206 applicants, 24.8% were seropositive for fascioliasis, included 21% female and 28.3% male. Mean range of age of patients was between 13 to 67 yr. The highest rate of seropositivity was found among 20-30 yr old patients. Most of the patients had hypereosinophilia. All patients had history of eating raw vegetables, or drinking unsafe water. Patients were referring from different provinces of Iran, including Gilan, Mazandaran, Tehran, Ardabil, Khuzestan, Lorestan, North Khorasan, Kermanshah, Azerbaijan, Fars, Kordestan, Hamedan and Markazi. During recent years, variety of provinces in Iran, where patients with fascioliasis are referred, has been increased. Patients coming from Gilan and Mazandaran provinces were referred early after the onset of their symptoms. Most probably, physicians in Gilan and Mazandaran are more alert on fascioliasis than other provinces. Previous wrong diagnosis was more common among patients referring from other provinces than Gilan and Mazandaran provinces.

  16. Sources

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1991-01-01

    This paper discusses the sources of radiation in the narrow perspective of radioactivity and the even narrow perspective of those sources that concern environmental management and restoration activities at DOE facilities, as well as a few related sources. Sources of irritation, Sources of inflammatory jingoism, and Sources of information. First, the sources of irritation fall into three categories: No reliable scientific ombudsman to speak without bias and prejudice for the public good, Technical jargon with unclear definitions exists within the radioactive nomenclature, and Scientific community keeps a low-profile with regard to public information. The next area of personal concern are the sources of inflammation. This include such things as: Plutonium being described as the most dangerous substance known to man, The amount of plutonium required to make a bomb, Talk of transuranic waste containing plutonium and its health affects, TMI-2 and Chernobyl being described as Siamese twins, Inadequate information on low-level disposal sites and current regulatory requirements under 10 CFR 61, Enhanced engineered waste disposal not being presented to the public accurately. Numerous sources of disinformation regarding low level radiation high-level radiation, Elusive nature of the scientific community, The Federal and State Health Agencies resources to address comparative risk, and Regulatory agencies speaking out without the support of the scientific community

  17. Entomology for Agricultural Science II Core Curriculum. Instructor Guide, Volume 23, Number 2, and Student Reference, Volume 23, Number 3.

    Science.gov (United States)

    DeFelice, Karen L.

    This unit is a basic introduction to entomology. The instructor guide and the corresponding student reference contain seven lessons: (1) introduction to entomology; (2) insect collection; (3) insect identification; (4) methods of control; (5) chemical control measures; (6) safe use of insecticides; and (7) integrated pest management. Students…

  18. Open source software and low cost sensors for teaching UAV science

    Science.gov (United States)

    Kefauver, S. C.; Sanchez-Bragado, R.; El-Haddad, G.; Araus, J. L.

    2016-12-01

    Drones, also known as UASs (unmanned aerial systems), UAVs (Unmanned Aerial Vehicles) or RPAS (Remotely piloted aircraft systems), are both useful advanced scientific platforms and recreational toys that are appealing to younger generations. As such, they can make for excellent education tools as well as low-cost scientific research project alternatives. However, the process of taking pretty pictures to remote sensing science can be daunting if one is presented with only expensive software and sensor options. There are a number of open-source tools and low cost platform and sensor options available that can provide excellent scientific research results, and, by often requiring more user-involvement than commercial software and sensors, provide even greater educational benefits. Scale-invariant feature transform (SIFT) algorithm implementations, such as the Microsoft Image Composite Editor (ICE), which can create quality 2D image mosaics with some motion and terrain adjustments and VisualSFM (Structure from Motion), which can provide full image mosaicking with movement and orthorectification capacities. RGB image quantification using alternate color space transforms, such as the BreedPix indices, can be calculated via plugins in the open-source software Fiji (http://fiji.sc/Fiji; http://github.com/george-haddad/CIMMYT). Recent analyses of aerial images from UAVs over different vegetation types and environments have shown RGB metrics can outperform more costly commercial sensors. Specifically, Hue-based pixel counts, the Triangle Greenness Index (TGI), and the Normalized Green Red Difference Index (NGRDI) consistently outperformed NDVI in estimating abiotic and biotic stress impacts on crop health. Also, simple kits are available for NDVI camera conversions. Furthermore, suggestions for multivariate analyses of the different RGB indices in the "R program for statistical computing", such as classification and regression trees can allow for a more approachable

  19. 圖書參考文獻對人文社會學科跨學科特性之影響: 以圖書資訊學為例 The influence of book references on characteristics of interdisciplinarity in the fields of humanities and social sciences: The case of the discipline of library and information science

    Directory of Open Access Journals (Sweden)

    Yu-Wei Chang

    2012-12-01

    Full Text Available 本研究以引文分析方式分析近30年(1982-2011間圖書資訊學期刊文獻之圖書參考文獻與期刊參考文獻之跨學科特性及趨勢。研究結果顯示,圖書與期刊二類參考文獻之跨學科程度均呈現成長趨勢,雖然二類參考文獻來自相同學科範圍,但期刊參考文獻來自圖書資訊學的比例明顯高於圖書資訊學圖書之比例,以及二類參考文獻之主要學科來源並不完全相同。基於圖書及期刊是圖書資訊學文獻之主要引用資料類型,且有不同之跨學科特性,建議圖書資訊學之跨學科研究,不能僅以期刊參考文獻為資料分析對象,必須將圖書納入分析範圍內。This study used citation analysis to analyze and compare the interdisciplinary characteristics and trends of book references and journal references of artilces published in journals of library and information science (LIS from 1982 to 2011. The results show that an increasing trend in degree of interdisciplinarity was identified based on book references and journal references, respectively. Although both book references and journal references represented across 30 disciplines, the propotion of LIS books is much higher than that of LIS journals. In addition, The main disciplines have a great contribution to book references are different from those to journal references. Because both books and journals are two types of sources cited most frequently for LIS researchers and interdisciplinary characteristics differ in book references and journal referebces. This study suggests that book references have to be included in sample data for studies of interdisciplinarity in humanities and social sciences using citation analysis.

  20. The IPEM code of practice for determination of the reference air kerma rate for HDR 192Ir brachytherapy sources based on the NPL air kerma standard

    International Nuclear Information System (INIS)

    Bidmead, A M; Sander, T; Nutbrown, R F; Locks, S M; Lee, C D; Aird, E G A; Flynn, A

    2010-01-01

    This paper contains the recommendations of the high dose rate (HDR) brachytherapy working party of the UK Institute of Physics and Engineering in Medicine (IPEM). The recommendations consist of a Code of Practice (COP) for the UK for measuring the reference air kerma rate (RAKR) of HDR 192 Ir brachytherapy sources. In 2004, the National Physical Laboratory (NPL) commissioned a primary standard for the realization of RAKR of HDR 192 Ir brachytherapy sources. This has meant that it is now possible to calibrate ionization chambers directly traceable to an air kerma standard using an 192 Ir source (Sander and Nutbrown 2006 NPL Report DQL-RD 004 (Teddington: NPL) http://publications.npl.co.uk). In order to use the source specification in terms of either RAKR, .K R (ICRU 1985 ICRU Report No 38 (Washington, DC: ICRU); ICRU 1997 ICRU Report No 58 (Bethesda, MD: ICRU)), or air kerma strength, S K (Nath et al 1995 Med. Phys. 22 209-34), it has been necessary to develop algorithms that can calculate the dose at any point around brachytherapy sources within the patient tissues. The AAPM TG-43 protocol (Nath et al 1995 Med. Phys. 22 209-34) and the 2004 update TG-43U1 (Rivard et al 2004 Med. Phys. 31 633-74) have been developed more fully than any other protocol and are widely used in commercial treatment planning systems. Since the TG-43 formalism uses the quantity air kerma strength, whereas this COP uses RAKR, a unit conversion from RAKR to air kerma strength was included in the appendix to this COP. It is recommended that the measured RAKR determined with a calibrated well chamber traceable to the NPL 192 Ir primary standard is used in the treatment planning system. The measurement uncertainty in the source calibration based on the system described in this COP has been reduced considerably compared to other methods based on interpolation techniques.

  1. Analogical reflection as a source for the science of life: Kant and the possibility of the biological sciences.

    Science.gov (United States)

    Nassar, Dalia

    2016-08-01

    In contrast to the previously widespread view that Kant's work was largely in dialogue with the physical sciences, recent scholarship has highlighted Kant's interest in and contributions to the life sciences. Scholars are now investigating the extent to which Kant appealed to and incorporated insights from the life sciences and considering the ways he may have contributed to a new conception of living beings. The scholarship remains, however, divided in its interest: historians of science are concerned with the content of Kant's claims, and the ways in which they may or may not have contributed to the emerging science of life, while historians of philosophy focus on the systematic justifications for Kant's claims, e.g., the methodological and theoretical underpinnings of Kant's statement that living beings are mechanically inexplicable. My aim in this paper is to bring together these two strands of scholarship into dialogue by showing how Kant's methodological concerns (specifically, his notion of reflective judgment) contributed to his conception of living beings and to the ontological concern with life as a distinctive object of study. I argue that although Kant's explicit statement was that biology could not be a science, his implicit and more fundamental claim was that the study of living beings necessitates a distinctive mode of thought, a mode that is essentially analogical. I consider the implications of this view, and argue that it is by developing a new methodology for grasping organized beings that Kant makes his most important contribution to the new science of life. Copyright © 2016. Published by Elsevier Ltd.

  2. An image-based skeletal dosimetry model for the ICRP reference adult male-internal electron sources

    International Nuclear Information System (INIS)

    Hough, Matthew; Johnson, Perry; Bolch, Wesley; Rajon, Didier; Jokisch, Derek; Lee, Choonsik

    2011-01-01

    In this study, a comprehensive electron dosimetry model of the adult male skeletal tissues is presented. The model is constructed using the University of Florida adult male hybrid phantom of Lee et al (2010 Phys. Med. Biol. 55 339-63) and the EGSnrc-based Paired Image Radiation Transport code of Shah et al (2005 J. Nucl. Med. 46 344-53). Target tissues include the active bone marrow, associated with radiogenic leukemia, and total shallow marrow, associated with radiogenic bone cancer. Monoenergetic electron emissions are considered over the energy range 1 keV to 10 MeV for the following sources: bone marrow (active and inactive), trabecular bone (surfaces and volumes), and cortical bone (surfaces and volumes). Specific absorbed fractions are computed according to the MIRD schema, and are given as skeletal-averaged values in the paper with site-specific values reported in both tabular and graphical format in an electronic annex available from http://stacks.iop.org/0031-9155/56/2309/mmedia. The distribution of cortical bone and spongiosa at the macroscopic dimensions of the phantom, as well as the distribution of trabecular bone and marrow tissues at the microscopic dimensions of the phantom, is imposed through detailed analyses of whole-body ex vivo CT images (1 mm resolution) and spongiosa-specific ex vivo microCT images (30 μm resolution), respectively, taken from a 40 year male cadaver. The method utilized in this work includes: (1) explicit accounting for changes in marrow self-dose with variations in marrow cellularity, (2) explicit accounting for electron escape from spongiosa, (3) explicit consideration of spongiosa cross-fire from cortical bone, and (4) explicit consideration of the ICRP's change in the surrogate tissue region defining the location of the osteoprogenitor cells (from a 10 μm endosteal layer covering the trabecular and cortical surfaces to a 50 μm shallow marrow layer covering trabecular and medullary cavity surfaces). Skeletal

  3. An image-based skeletal dosimetry model for the ICRP reference adult male-internal electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Hough, Matthew; Johnson, Perry; Bolch, Wesley [Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, FL (United States); Rajon, Didier [Department of Neurosurgery, University of Florida, Gainesville, FL (United States); Jokisch, Derek [Department of Physics and Astronomy, Francis Marion University, Florence, SC (United States); Lee, Choonsik, E-mail: wbolch@ufl.edu [Radiation Epidemiology Branch, National Cancer Institute, Bethesda, MD (United States)

    2011-04-21

    In this study, a comprehensive electron dosimetry model of the adult male skeletal tissues is presented. The model is constructed using the University of Florida adult male hybrid phantom of Lee et al (2010 Phys. Med. Biol. 55 339-63) and the EGSnrc-based Paired Image Radiation Transport code of Shah et al (2005 J. Nucl. Med. 46 344-53). Target tissues include the active bone marrow, associated with radiogenic leukemia, and total shallow marrow, associated with radiogenic bone cancer. Monoenergetic electron emissions are considered over the energy range 1 keV to 10 MeV for the following sources: bone marrow (active and inactive), trabecular bone (surfaces and volumes), and cortical bone (surfaces and volumes). Specific absorbed fractions are computed according to the MIRD schema, and are given as skeletal-averaged values in the paper with site-specific values reported in both tabular and graphical format in an electronic annex available from http://stacks.iop.org/0031-9155/56/2309/mmedia. The distribution of cortical bone and spongiosa at the macroscopic dimensions of the phantom, as well as the distribution of trabecular bone and marrow tissues at the microscopic dimensions of the phantom, is imposed through detailed analyses of whole-body ex vivo CT images (1 mm resolution) and spongiosa-specific ex vivo microCT images (30 {mu}m resolution), respectively, taken from a 40 year male cadaver. The method utilized in this work includes: (1) explicit accounting for changes in marrow self-dose with variations in marrow cellularity, (2) explicit accounting for electron escape from spongiosa, (3) explicit consideration of spongiosa cross-fire from cortical bone, and (4) explicit consideration of the ICRP's change in the surrogate tissue region defining the location of the osteoprogenitor cells (from a 10 {mu}m endosteal layer covering the trabecular and cortical surfaces to a 50 {mu}m shallow marrow layer covering trabecular and medullary cavity surfaces). Skeletal

  4. Survey on the Sources of Information in Science, Technology and Commerce in the State of Penang, Malaysia

    Science.gov (United States)

    Tee, Lim Huck; Fong, Tang Wan

    1973-01-01

    Penang, Malaysia is undergoing rapid industrialization to stimulate its economy. A survey was conducted to determine what technical, scientific, and commercial information sources were available. Areas covered in the survey were library facilities, journals, commercial reference works and audio-visual materials. (DH)

  5. Science, information, technology, and the changing character of public policy in non-point source pollution

    Science.gov (United States)

    King, John L.; Corwin, Dennis L.

    Information technologies are already delivering important new capabilities for scientists working on non-point source (NPS) pollution in the vadose zone, and more are expected. This paper focuses on the special contributions of modeling and network communications for enhancing the effectiveness of scientists in the realm of policy debates regarding NPS pollution mitigation and abatement. The discussion examines a fundamental shift from a strict regulatory strategy of pollution control characterized by a bureaucratic/technical alliance during the period through the 1970's and early 1980's, to a more recently evolving paradigm of pluralistic environmental management. The role of science and scientists in this shift is explored, with special attention to the challenges facing scientists working in NPS pollution in the vadose zone. These scientists labor under a special handicap in the evolving model because their scientific tools are often times incapable of linking NPS pollution with individuals responsible for causing it. Information can facilitate the effectiveness of these scientists in policy debates, but not under the usual assumptions in which scientific truth prevails. Instead, information technology's key role is in helping scientists shape the evolving discussion of trade-offs and in bringing citizens and policymakers closer to the routine work of scientists.

  6. History of Science and Conceptual Change: The Formation of Shadows by Extended Light Sources

    Science.gov (United States)

    Dedes, Christos; Ravanis, Konstantinos

    2009-09-01

    This study investigates the effectiveness of a teaching conflict procedure whose purpose was the transformation of the representations of 12-16-year-old pupils in Greece concerning light emission and shadow formation by extended light sources. The changes observed during the children’s effort to destabilize and reorganise their representations towards a model that was compatible with the respective scientific model were studied using three groups of pupils belonging to different age groups. The methodological plan implemented was based on input from the History of Science, while the parameters of the geometrical optics model were derived from Kepler’s relevant historic experiment. The effectiveness of the teaching procedure was evaluated 2 weeks after the intervention. The results showed that the majority of the subjects accepted the model of geometrical optics, i.e. the pupils were able to correctly predict and adequately justify the experimental results based on the principle of punctiform light emission. Educational and research implications are discussed.

  7. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  8. Is victim identity in genocide a question of science or law? The scientific perspective, with special reference to Darfur.

    Science.gov (United States)

    Komar, Debra

    2008-09-01

    In genocide, victims must represent an ethnic, racial, religious or national group. But is victim identity a question of science or law? Must victims be a socially recognized group or can group identity exist solely in the mind of the perpetrator? This question is relevant to the on-going crisis in Darfur. The "Arab-on-African" violence depicted in the media encompasses identities not shared by Darfurians. This study details an evaluation of victim identity in Darfur, based on field research and literature review. Darfurians are defined by subsistence strategy and economic groups are not protected under genocide law. Whether Darfur is genocide depends on whether victims must conform to scientific group classifications or need only be defined by their relationship to the perpetrators.

  9. Hispanic Latin America, Spain and the Spanish-speaking Caribbean: a rich source of reference material for public health, epidemiology and tropical medicine.

    Science.gov (United States)

    Williams, John R; Bórquez, Annick; Basáñez, María-Gloria

    2008-09-30

    There is a multiplicity of journals originating in Spain and the Spanish-speaking countries of Latin America and the Caribbean (SSLAC) in the health sciences of relevance to the fields of epidemiology and public health. While the subject matter of epidemiology in Spain shares many features with its neighbours in Western Europe, many aspects of epidemiology in Latin America are particular to that region. There are also distinctive theoretical and philosophical approaches to the study of epidemiology and public health arising from traditions such as the Latin American social medicine movement, of which there may be limited awareness. A number of online bibliographic databases are available which focus primarily on health sciences literature arising in Spain and Latin America, the most prominent being Literatura Latinoamericana en Ciencias de la Salud (LILACS) and LATINDEX. Some such as LILACS also extensively index grey literature. As well as in Spanish, interfaces are provided in English and Portuguese. Abstracts of articles may also be provided in English with an increasing number of journals beginning to publish entire articles written in English. Free full text articles are becoming accessible, one of the most comprehensive sources being the Scientific Electronic Library Online (SciELO). There is thus an extensive range of literature originating in Spain and SSLAC freely identifiable and often accessible online, and with the potential to provide useful inputs to the study of epidemiology and public health provided that any reluctance to explore these resources can be overcome. In this article we provide an introduction to such resources.

  10. Sources of Anxiety and the Meaning of Participation in/for Science Fairs: A Canadian Case

    Science.gov (United States)

    Reis, Giuliano; Dionne, Liliane; Trudel, Louis

    2015-01-01

    Although anxiety is a significant emotional element of formal school science, little is known about how anxiety is originated and managed in the context of science fairs. The purpose of the present study was to investigate how a group of students in Grades 7 to 12 discursively (re)produce anxiety and its management from the perspective of their…

  11. History of Science in the Physics Curriculum: A Directed Content Analysis of Historical Sources

    Science.gov (United States)

    Seker, Hayati; Guney, Burcu G.

    2012-01-01

    Although history of science is a potential resource for instructional materials, teachers do not have a tendency to use historical materials in their lessons. Studies showed that instructional materials should be adaptable and consistent with curriculum. This study purports to examine the alignment between history of science and the curriculum in…

  12. Toward Control of Matter: Basic Energy Science Needs for a New Class of X-Ray Light Sources

    International Nuclear Information System (INIS)

    Arenholz, Elke; Belkacem, Ali; Cocke, Lew; Corlett, John; Falcone, Roger; Fischer, Peter; Fleming, Graham; Gessner, Oliver; Hasan, M. Zahid; Hussain, Zahid; Kevan, Steve; Kirz, Janos; McCurdy, Bill; Nelson, Keith; Neumark, Dan; Nilsson, Anders; Siegmann, Hans; Stocks, Malcolm; Schafer, Ken; Schoenlein, Robert; Spence, John; Weber, Thorsten

    2008-01-01

    Over the past quarter century, light-source user facilities have transformed research in areas ranging from gas-phase chemical dynamics to materials characterization. The ever-improving capabilities of these facilities have revolutionized our ability to study the electronic structure and dynamics of atoms, molecules, and even the most complex new materials, to understand catalytic reactions, to visualize magnetic domains, and to solve protein structures. Yet these outstanding facilities still have limitations well understood by their thousands of users. Accordingly, over the past several years, many proposals and conceptual designs for 'next-generation' x-ray light sources have been developed around the world. In order to survey the scientific problems that might be addressed specifically by those new light sources operating below a photon energy of about 3 keV and to identify the scientific requirements that should drive the design of such facilities, a workshop 'Science for a New Class of Soft X-Ray Light Sources' was held in Berkeley in October 2007. From an analysis of the most compelling scientific questions that could be identified and the experimental requirements for answering them, we set out to define, without regard to the specific technologies upon which they might be based, the capabilities such light sources would have to deliver in order to dramatically advance the state of research in the areas represented in the programs of the Department of Energy's Office of Basic Energy Sciences (BES). This report is based on the workshop presentations and discussions

  13. Toward Control of Matter: Basic Energy Science Needs for a New Class of X-Ray Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Arenholz, Elke; Belkacem, Ali; Cocke, Lew; Corlett, John; Falcone, Roger; Fischer, Peter; Fleming, Graham; Gessner, Oliver; Hasan, M. Zahid; Hussain, Zahid; Kevan, Steve; Kirz, Janos; McCurdy, Bill; Nelson, Keith; Neumark, Dan; Nilsson, Anders; Siegmann, Hans; Stocks, Malcolm; Schafer, Ken; Schoenlein, Robert; Spence, John; Weber, Thorsten

    2008-09-24

    Over the past quarter century, light-source user facilities have transformed research in areas ranging from gas-phase chemical dynamics to materials characterization. The ever-improving capabilities of these facilities have revolutionized our ability to study the electronic structure and dynamics of atoms, molecules, and even the most complex new materials, to understand catalytic reactions, to visualize magnetic domains, and to solve protein structures. Yet these outstanding facilities still have limitations well understood by their thousands of users. Accordingly, over the past several years, many proposals and conceptual designs for"next-generation" x-ray light sources have been developed around the world. In order to survey the scientific problems that might be addressed specifically by those new light sources operating below a photon energy of about 3 keV and to identify the scientific requirements that should drive the design of such facilities, a workshop"Science for a New Class of Soft X-Ray Light Sources" was held in Berkeley in October 2007. From an analysisof the most compelling scientific questions that could be identified and the experimental requirements for answering them, we set out to define, without regard to the specific technologies upon which they might be based, the capabilities such light sources would have to deliver in order to dramatically advance the state of research in the areas represented in the programs of the Department of Energy's Office of Basic Energy Sciences (BES). This report is based on the workshop presentations and discussions.

  14. Emittance study of a 28 GHz electron cyclotron resonance ion source for the Rare Isotope Science Project superconducting linear accelerator.

    Science.gov (United States)

    Park, Bum-Sik; Hong, In-Seok; Jang, Ji-Ho; Jin, Hyunchang; Choi, Sukjin; Kim, Yonghwan

    2016-02-01

    A 28 GHz electron cyclotron resonance (ECR) ion source is being developed for use as an injector for the superconducting linear accelerator of the Rare Isotope Science Project. Beam extraction from the ECR ion source has been simulated using the KOBRA3-INP software. The simulation software can calculate charged particle trajectories in three dimensional complex magnetic field structures, which in this case are formed by the arrangement of five superconducting magnets. In this study, the beam emittance is simulated to understand the effects of plasma potential, mass-to-charge ratio, and spatial distribution. The results of these simulations and their comparison to experimental results are presented in this paper.

  15. Using Citizen Science and Crowdsourcing via Aurorasaurus as a Near Real Time Data Source for Space Weather Applications

    Science.gov (United States)

    MacDonald, E.; Heavner, M.; Hall, M.; Tapia, A.; Lalone, N.; Clayon, J.; Case, N.

    2014-12-01

    Aurorasaurus is on the cutting edge of space science, citizen science, and computer science simultaneously with the broad goals to develop a real-time citizen science network, educate the general public about the northern lights, and revolutionize real-time space weather nowcasting of the aurora for the public. We are currently in the first solar maximum with social media, which enables the technological roots to connect users, citizen scientists, and professionals around a shared global, rare interest. We will introduce the project which has been in a prototype mode since 2012 and recently relaunched with a new mobile and web presence and active campaigns. We will showcase the interdisciplinary advancements which include a more educated public, disaster warning system applications, and improved real-time ground truth data including photographs and observations of the Northern Lights. We will preview new data which validates the proof of concept for significant improvements in real-time space weather nowcasting. Our aim is to provide better real-time notifications of the visibility of the Northern Lights to the interested public via the combination of noisy crowd-sourced ground truth with noisy satellite-based predictions. The latter data are available now but are often delivered with significant jargon and uncertainty, thus reliable, timely interpretation of such forecasts by the public are problematic. The former data show real-time characteristic significant rises (in tweets for instance) that correlate with other non-real-time indices of auroral activity (like the Kp index). We will discuss the source of 'noise' in each data source. Using citizen science as a platform to provide a basis for deeper understanding is one goal; secondly we want to improve understanding of and appreciation for the dynamics and beauty of the Northern Lights by the public and scientists alike.

  16. 'Big science' forum gets a broader role and warns of a need for more neutron sources

    CERN Multimedia

    Dickson, D

    1998-01-01

    After a positive external review, the intergovernmental Megascience Forum set up by OECD to discuss issues concerning funding of major science facilities, is now likely to continue its work under a new name and with a wider mandate (1 page).

  17. Technology and science at a high-power spallation source: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    These proceedings cover many aspects of the usefulness of spallation neutrons. Nine different areas are considered: surfaces and interfaces, engineering, materials science, polymers and complex fluids, chemistry, structural biology, nuclear engineering and radiation effects, condensed matter physics and fundamental physics.

  18. Technology and science at a high-power spallation source: Proceedings

    International Nuclear Information System (INIS)

    1994-01-01

    These proceedings cover many aspects of the usefulness of spallation neutrons. Nine different areas are considered: surfaces and interfaces, engineering, materials science, polymers and complex fluids, chemistry, structural biology, nuclear engineering and radiation effects, condensed matter physics and fundamental physics

  19. New Source Code: Spelman Women Transforming the Grid of Science and Technology

    Science.gov (United States)

    Okonkwo, Holly

    From a seminary for newly freedwomen in the 19th century "Deep South" of the United States to a "Model Institution for Excellence" in undergraduate science, technology, engineering, and math education, the narrative of Spelman College is a critical piece to understanding the overall history and socially constructed nature of science and higher education in the U.S. Making a place for science at Spelman College, disrupts and redefines the presumed and acceptable roles of African American women in science and their social, political and economic engagements in U.S society as a whole. Over the course of 16 months, I explore the narrative experiences of members of the Spelman campus community and immerse myself in the environment to experience becoming of member of a scientific community that asserts a place for women of African descent in science and technology and perceives this positionality as positive, powerful and the locus of agency. My intention is to offer this research as an in-depth ethnographic presentation of intentional science learning, knowledge production and practice as lived experiences at the multiple intersections of the constructs of race, gender, positionality and U.S science itself. In this research, I am motivated to move the contemporary discourse of diversifying science, technology, engineering and mathematics fields in the U.S. academy, beyond the chronicling of women of African descent as statistical rarities over time, as subjectivities and the deficit frameworks that theoretically encapsulate their narratives. The findings of this research demonstrate that Spelman students, staff and alumni are themselves, the cultural capital that validates Spelman's identity as a place, its institutional mission and are at the core of the institutional success of the college. It is a personal mission as much as it is an institutional mission, which is precisely what makes it powerful.

  20. Report of the Basic Energy Sciences Workshop on Compact Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Barletta, William A. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Borland, Michael [Argonne National Lab. (ANL), Argonne, IL (United States)

    2010-05-11

    This report is based on a BES Workshop on Compact Light Sources, held May 11-12, 2010, to evaluated the advantages and disadvantages of compact light source approaches and compared their performance to the third generation storage rings and free-electron lasers. The workshop examined the state of the technology for compact light sources and their expected progress. The workshop evaluated the cost efficiency, user access, availability, and reliability of such sources. Working groups evaluated the advantages and disadvantages of Compact Light Source (CLS) approaches, and compared their performance to the third-generation storage rings and free-electron lasers (FELs). The primary aspects of comparison were 1) cost effectiveness, 2) technical availability v. time frame, and 3) machine reliability and availability for user access. Five categories of potential sources were analyzed: 1) inverse Compton scattering (ICS) sources, 2) mini storage rings, 3) plasma sources, 4) sources using plasma-based accelerators, and 5) laser high harmonic generation (HHG) sources. Compact light sources are not a substitute for large synchrotron and FEL light sources that typically also incorporate extensive user support facilities. Rather they offer attractive, complementary capabilities at a small fraction of the cost and size of large national user facilities. In the far term they may offer the potential for a new paradigm of future national user facility. In the course of the workshop, we identified overarching R&D topics over the next five years that would enhance the performance potential of both compact and large-scale sources: Development of infrared (IR) laser systems delivering kW-class average power with femtosecond pulses at kHz repetition rates. These have application to ICS sources, plasma sources, and HHG sources. Development of laser storage cavities for storage of 10-mJ picosecond and femtosecond pulses focused to micron beam sizes. Development of high-brightness, high

  1. Epidemiology of hemoglobinopathies and thalassemias in individuals referred to the haematology research centre, Shiraz University of Medical Sciences, Shiraz, Iran from 2006 to 2011.

    Science.gov (United States)

    Haghpanah, Sezaneh; Ramzi, Mani; Zakerinia, Maryam; Nourani Khojasteh, Habib; Haghshenas, Mansour; Rezaei, Narges; Moayed, Vida; Rezaei, Alireza; Karimi, Mehran

    2014-01-01

    Hemoglobinopathies and thalassemias are the most frequent genetic hereditary disorders with an increasing global health burden, especially in low- and middle-income countries. We aimed to determine the epidemiologic pattern of hemoglobinopathies and thalassemias in individuals referred to the Haematology Research Centre, Shiraz University of Medical Sciences, Shiraz, Iran, which is the most important referral center in Southern Iran during 2006 to 2011. The most frequent abnormality was β-thalassemia (β-thal) minor (24.0%), followed by α-thalassemia (α-thal) trait (10.0%), hemoglobin (Hb) S trait (4.0%) and Hb D-Punjab trait (4.0%). Because this center is a referral center, we detected a higher prevalence compared to the normal population; however, these data could help policymakers and health service providers to better programming for prevention of births affected with Hb disorders.

  2. Radioactive sources production in the Boris Kidric Institute of nuclear sciences

    International Nuclear Information System (INIS)

    Radosavljevic, B.; Nemoda, Dj.; Memedovic, T.; Bircanin, LJ.

    1978-01-01

    Since 1960, in the Laboratory for radioisotopes production of the Institute isotopes were produced for industrial, medical and research purposes. From the beginning, this activity was developed in two directions: 1. sealed sources, for industrial radiography, teletherapy Cobalt, later for lightning arresters, level meters, densitometers etc., 2. radioactive sources that need chemical treatment for different applications in industry and research. This paper lists the types of radioactive sources and methods for production [sr

  3. Hispanic Latin America, Spain and the Spanish-speaking Caribbean: A rich source of reference material for public health, epidemiology and tropical medicine

    Directory of Open Access Journals (Sweden)

    Basáñez María-Gloria

    2008-09-01

    Full Text Available Abstract There is a multiplicity of journals originating in Spain and the Spanish-speaking countries of Latin America and the Caribbean (SSLAC in the health sciences of relevance to the fields of epidemiology and public health. While the subject matter of epidemiology in Spain shares many features with its neighbours in Western Europe, many aspects of epidemiology in Latin America are particular to that region. There are also distinctive theoretical and philosophical approaches to the study of epidemiology and public health arising from traditions such as the Latin American social medicine movement, of which there may be limited awareness. A number of online bibliographic databases are available which focus primarily on health sciences literature arising in Spain and Latin America, the most prominent being Literatura Latinoamericana en Ciencias de la Salud (LILACS and LATINDEX. Some such as LILACS also extensively index grey literature. As well as in Spanish, interfaces are provided in English and Portuguese. Abstracts of articles may also be provided in English with an increasing number of journals beginning to publish entire articles written in English. Free full text articles are becoming accessible, one of the most comprehensive sources being the Scientific Electronic Library Online (SciELO. There is thus an extensive range of literature originating in Spain and SSLAC freely identifiable and often accessible online, and with the potential to provide useful inputs to the study of epidemiology and public health provided that any reluctance to explore these resources can be overcome. In this article we provide an introduction to such resources.

  4. Hispanic Latin America, Spain and the Spanish-speaking Caribbean: A rich source of reference material for public health, epidemiology and tropical medicine

    Science.gov (United States)

    Williams, John R; Bórquez, Annick; Basáñez, María-Gloria

    2008-01-01

    There is a multiplicity of journals originating in Spain and the Spanish-speaking countries of Latin America and the Caribbean (SSLAC) in the health sciences of relevance to the fields of epidemiology and public health. While the subject matter of epidemiology in Spain shares many features with its neighbours in Western Europe, many aspects of epidemiology in Latin America are particular to that region. There are also distinctive theoretical and philosophical approaches to the study of epidemiology and public health arising from traditions such as the Latin American social medicine movement, of which there may be limited awareness. A number of online bibliographic databases are available which focus primarily on health sciences literature arising in Spain and Latin America, the most prominent being Literatura Latinoamericana en Ciencias de la Salud (LILACS) and LATINDEX. Some such as LILACS also extensively index grey literature. As well as in Spanish, interfaces are provided in English and Portuguese. Abstracts of articles may also be provided in English with an increasing number of journals beginning to publish entire articles written in English. Free full text articles are becoming accessible, one of the most comprehensive sources being the Scientific Electronic Library Online (SciELO). There is thus an extensive range of literature originating in Spain and SSLAC freely identifiable and often accessible online, and with the potential to provide useful inputs to the study of epidemiology and public health provided that any reluctance to explore these resources can be overcome. In this article we provide an introduction to such resources. PMID:19243576

  5. Energy: Sources and Issues. Science Syllabus for Middle and Junior High Schools. Block I.

    Science.gov (United States)

    Cappiello, Jane E.; O'Neil, Karen E.

    This syllabus provides a list of concepts and understandings related to four areas of energy. They are: (1) the nature of energy (an energy definition, basic categories of energy, forms of energy, laws of energy conversion, and measuring energy); (2) energy sources of the past and present (history of energy use and present major sources of…

  6. Pathway computation in models derived from bio-science text sources

    DEFF Research Database (Denmark)

    Andreasen, Troels; Bulskov, Henrik; Jensen, Per Anker

    2017-01-01

    This paper outlines a system, OntoScape, serving to accomplish complex inference tasks on knowledge bases and bio-models derived from life-science text corpora. The system applies so-called natural logic, a form of logic which is readable for humans. This logic affords ontological representations...

  7. Looking in the Right Places: Minority-Serving Institutions as Sources of Diverse Earth Science Learners

    Science.gov (United States)

    McDaris, John R.; Manduca, Cathryn A.; Iverson, Ellen R.; Orr, Cailin Huyck

    2017-01-01

    Despite gains over the last decade, the geoscience student population in the United States today continues to lag other science, technology, engineering, and mathematics disciplines in terms of diversity. Minority-serving institutions (MSIs) can play an important role in efforts to broaden underrepresented student engagement with Earth Science…

  8. Misconceptions and Biases in German Students' Perception of Multiple Energy Sources: Implications for Science Education

    Science.gov (United States)

    Lee, Roh Pin

    2016-01-01

    Misconceptions and biases in energy perception could influence people's support for developments integral to the success of restructuring a nation's energy system. Science education, in equipping young adults with the cognitive skills and knowledge necessary to navigate in the confusing energy environment, could play a key role in paving the way…

  9. The Sources of Science Teaching Self-efficacy among Elementary School Teachers: A mediational model approach

    Science.gov (United States)

    Wang, Ya-Ling; Tsai, Chin-Chung; Wei, Shih-Hsuan

    2015-09-01

    This study aimed to investigate the factors accounting for science teaching self-efficacy and to examine the relationships among Taiwanese teachers' science teaching self-efficacy, teaching and learning conceptions, technological-pedagogical content knowledge for the Internet (TPACK-I), and attitudes toward Internet-based instruction (Attitudes) using a mediational model approach. A total of 233 science teachers from 41 elementary schools in Taiwan were invited to take part in the study. After ensuring the validity and reliability of each questionnaire, the results indicated that each measure had satisfactory validity and reliability. Furthermore, through mediational models, the results revealed that TPACK-I and Attitudes mediated the relationship between teaching and learning conceptions and science teaching self-efficacy, suggesting that (1) knowledge of and attitudes toward Internet-based instruction (KATII) mediated the positive relationship between constructivist conceptions of teaching and learning and outcome expectancy, and that (2) KATII mediated the negative correlations between traditional conceptions of teaching and learning and teaching efficacy.

  10. Deep UV Semiconductor Sources for Advanced Planetary Science Instruments, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal addresses the need for miniature, narrow-linewidth, deep UV optical sources that operate at very low ambient temperatures for use in advanced in situ...

  11. QuakeSim: Multi-Source Synergistic Data Intensive Computing for Earth Science

    Data.gov (United States)

    National Aeronautics and Space Administration — Update QuakeSim services to integrate and rapidly fuse data from multiple sources to support comprehensive efforts in data mining, analysis, simulation, and...

  12. GDA and EPICS: working in unison for science driven data acquisition and control at Diamond light source

    International Nuclear Information System (INIS)

    Gibbons, E.P.; Heron, M.T.; Rees, N.P.

    2012-01-01

    Diamond Light Source has recently received funding for an additional 10 photon beamlines, bringing the total to 32 beamlines and around 40 end-stations. These all use EPICS (Experimental Physics and Industrial Control System) for the control of the underlying instrumentation associated with photon delivery, the experiment and most of the data acquisition hardware. For the scientific users Diamond has developed the Generic Data Acquisition (GDA) application framework to provide a consistent science interface across all beamlines. While each application is customized to the science of its beamline, all applications are built from the framework and predominantly interface to the underlying instrumentation through the EPICS abstraction. We will describe the complete system, illustrate how it can be configured for a specific beamline application, and how other synchrotrons are, and can, adapt these tools for their needs. (authors)

  13. Anatomy of BioJS, an open source community for the life sciences.

    Science.gov (United States)

    Yachdav, Guy; Goldberg, Tatyana; Wilzbach, Sebastian; Dao, David; Shih, Iris; Choudhary, Saket; Crouch, Steve; Franz, Max; García, Alexander; García, Leyla J; Grüning, Björn A; Inupakutika, Devasena; Sillitoe, Ian; Thanki, Anil S; Vieira, Bruno; Villaveces, José M; Schneider, Maria V; Lewis, Suzanna; Pettifer, Steve; Rost, Burkhard; Corpas, Manuel

    2015-07-08

    BioJS is an open source software project that develops visualization tools for different types of biological data. Here we report on the factors that influenced the growth of the BioJS user and developer community, and outline our strategy for building on this growth. The lessons we have learned on BioJS may also be relevant to other open source software projects.

  14. Source Identification of Human Biological Materials and Its Prospect in Forensic Science.

    Science.gov (United States)

    Zou, K N; Gui, C; Gao, Y; Yang, F; Zhou, H G

    2016-06-01

    Source identification of human biological materials in crime scene plays an important role in reconstructing the crime process. Searching specific genetic markers to identify the source of different human biological materials is the emphasis and difficulty of the research work of legal medical experts in recent years. This paper reviews the genetic markers which are used for identifying the source of human biological materials and studied widely, such as DNA methylation, mRNA, microRNA, microflora and protein, etc. By comparing the principles and methods of source identification of human biological materials using different kinds of genetic markers, different source of human biological material owns suitable marker types and can be identified by detecting single genetic marker or combined multiple genetic markers. Though there is no uniform standard and method for identifying the source of human biological materials in forensic laboratories at present, the research and development of a series of mature and reliable methods for distinguishing different human biological materials play the role as forensic evidence which will be the future development direction. Copyright© by the Editorial Department of Journal of Forensic Medicine.

  15. Neptunium: a bibliographic reference

    International Nuclear Information System (INIS)

    Mosley, R.E.

    1979-06-01

    A comprehensive bibliograhy of the literature on the element neptunium published prior to January 1976 is presented. A short abstract is given for each listed reference, with a few exceptions. The references are divided into sections categorized as General, Man-Made Sources (Reactors), Man-Made Sources (Fuel Reprocessing), Chemistry (Solubility), Chemistry (Compounds), Chemistry (Isotopes), Analyses (Instrumental), Analyses (Chemical), Chemical (Animal), Biological (Effects), Biological (Animal-Metabolism-Retention), Biological (Air Movement), Biological (Human Inhalation), Measurement, and Dosimetry. The bibliography contains author and keyword indexes and was compiled to serve as a quick reference source for neptunium-related work. 184 citations

  16. Modeling of the charge-state separation at ITEP experimental facility for material science based on a Bernas ion source.

    Science.gov (United States)

    Barminova, H Y; Saratovskyh, M S

    2016-02-01

    The experiment automation system is supposed to be developed for experimental facility for material science at ITEP, based on a Bernas ion source. The program CAMFT is assumed to be involved into the program of the experiment automation. CAMFT is developed to simulate the intense charged particle bunch motion in the external magnetic fields with arbitrary geometry by means of the accurate solution of the particle motion equation. Program allows the consideration of the bunch intensity up to 10(10) ppb. Preliminary calculations are performed at ITEP supercomputer. The results of the simulation of the beam pre-acceleration and following turn in magnetic field are presented for different initial conditions.

  17. Reference sources for the calibration of surface contamination monitors - Beta-emitters (maximum beta energy greater than MeV) and alpha-emitters (International Standard Publication ISO 8769:1988)

    International Nuclear Information System (INIS)

    Stefanik, J.

    2001-01-01

    This International Standard specifies the characteristics of reference sources of radioactive surface contamination, traceable to national measurement standards, for the calibration of surface contamination monitors. This International Standard relates to alpha-emitters and to beta-emitters of maximum beta energy greater than 0,15 MeV. It does not describe the procedures involved in the use of these reference sources for the calibration of surface contamination monitors. Such procedures are specified in IEC Publication 325 and other documents. This International Standard specifies reference radiations for the calibration of surface contamination monitors which take the form of adequately characterized large area sources specified, without exception, in terms of activity and surface emission rate, the evaluation of these quantities being traceable to national standards

  18. Recent developments of ion sources for life-science studies at the Heavy Ion Medical Accelerator in Chiba (invited)

    Energy Technology Data Exchange (ETDEWEB)

    Kitagawa, A.; Drentje, A. G.; Fujita, T.; Muramatsu, M. [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage, Chiba 263-8555 (Japan); Fukushima, K.; Shiraishi, N.; Suzuki, T.; Takahashi, K.; Takasugi, W. [Accelerator Engineering Corporation, Chiba (Japan); Biri, S.; Rácz, R. [Institute for Nuclear Research (Atomki), Hungarian Academy of Sciences, Bem tér 18/C, H-4026 Debrecen (Hungary); Kato, Y. [Graduate School of Engineering, Osaka University, Osaka (Japan); Uchida, T.; Yoshida, Y. [Bio-Nano Electronics Research Centre, Toyo University, Kawagoe (Japan)

    2016-02-15

    With about 1000-h of relativistic high-energy ion beams provided by Heavy Ion Medical Accelerator in Chiba, about 70 users are performing various biology experiments every year. A rich variety of ion species from hydrogen to xenon ions with a dose rate of several Gy/min is available. Carbon, iron, silicon, helium, neon, argon, hydrogen, and oxygen ions were utilized between 2012 and 2014. Presently, three electron cyclotron resonance ion sources (ECRISs) and one Penning ion source are available. Especially, the two frequency heating techniques have improved the performance of an 18 GHz ECRIS. The results have satisfied most requirements for life-science studies. In addition, this improved performance has realized a feasible solution for similar biology experiments with a hospital-specified accelerator complex.

  19. SU-F-T-276: Source Modeling and VMAT Quality Assurance Referring to the TrueBeam Representative Beam Data for Eclipse

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Q [Beijing Hospital, Beijing (China)

    2016-06-15

    Purpose: To study quality assurance (QA) of volumetric modulated arc therapy (VMAT) after the 6MV and 10MV photon beam source modeling, referring to the Varian TrueBeam representative beam data for Eclipse. Methods: The source model needs specific measured beam data, such as PDDs and profiles, diagonal profile, output factors (OFs), and MLC transmission factor (TF) and dosimetric leaf gap (DLG), et al. We downloaded the representative data from myVarian website, which includes TrueBeam 4MV-15MV photon beam data and 6MeV-22MeV electron beam data in w2CAD file format for use with Eclipse and in Excel spreadsheet format for use in data comparison. The beam data in W2CAD format can be imported into the Eclipse system and calibrated for use, as appropriate. We used PTW MP3 water tank to measure the beam data in some typical field sizes, and compared the measured data with the representative data. We found that the PDDs, profiles and OFs are similar. However according to some papers and our measurements, we decided that our MLC TF and DLG are 1.58 and 1.33 (6MV), 1.79 and 1.57 (10MV), respectively. After we had configured the anisotropic analytical algorithm (AAA) with the representative data in Eclipse, we also have done dosimetric verification for 88 VMAT plans. Results: The end-to-end test procedures of VMAT were performed for 6MV and 10MV energy modes. The NE Farmer ion chamber mean measurements showed 1.2% (6MV, 38 cases) and 1.2% (10MV, 50 cases) between measurement and calculation; the Sun Nuclear ArcCheck mean measurements demonstrated gamma pass rates are as followings: 98.9%, 93.2%, 61.0% for 6MV, and 98.9%, 91.9%, 59.5% for 10MV, using 3%/3mm, 2%/2mm, 1%/1mm, 10% threshold criteria, respectively. Conclusion: The representative data is applicable to our TrueBeam for the VMAT plan, though our MLC factors are a little different, and its patientspecific QA is good.

  20. Estimation of Completeness of Cancer Registration for Patients Referred to Shiraz Selected Centers through a Two Source Capture Re-capture Method, 2009 Data.

    Science.gov (United States)

    Sharifian, Roxana; SedaghatNia, Mohammad Hossein; Nematolahi, Mohtram; Zare, Najaf; Barzegari, Saeed

    2015-01-01

    Cancer has important social consequences with cancer registration as the basis of moving towards prevention. The present study aimed to estimate the completeness of registration of the ten most common cancers in patients referred to selected hospitals in Shiraz, Iran by using capture-recapture method. This cross-sectional analytical study was performed in 2014 based on the data of 2009, on a total of 4,388 registered cancer patients. After cleaning data from two sources, using capture-recapture common findings were identified. Then, the percentage of the completeness of cancer registration was estimated using Chapman and Chao methods. Finally, the effects of demographic and treatment variables on the completeness of cancer registration were investigated. The results showed that the percentages of completeness of cancer registration in the selected hospitals of Shiraz were 58.6% and 58.4%, and influenced by different variables. The age group between 40-49 years old was the highest represented and for the age group under 20 years old was the lowest for cancer registration. Breast cancer had the highest registration level and after that, thyroid and lung cancers, while colorectal cancer had the lowest registration level. According to the results, the number of cancers registered was very few and it seems that factors like inadequate knowledge of some doctors, imprecise diagnosis about the types of cancer, incorrectly filled out medical documents, and lack of sufficient accuracy in recording data on the computer cause errors and defects in cancer registration. This suggests a necessity to educate and teach doctors and other medical workers about the methods of documenting information related to cancer and also conduct additional measures to improve the cancer registration system.

  1. Prevalence of obsessive-compulsive disorder in patients with opium addiction that refer to the addiction clinics affiliated to the Lorestan University of Medical Sciences in 2015

    Directory of Open Access Journals (Sweden)

    Samaneh Mohamadpour

    2016-12-01

    Full Text Available Background : The existence of OCD-like symptom in patients with  opium addiction , , the lack of a coherent,  and shows the necessity of this study. The aim of this research is to study of prevalence of obsessive-compulsive disorder in patients with opioid dependency that refer to the addiction clinics affiliated to the lorestan university of medical sciences. Materials and Methods: This research is a cross-sectional descriptive study. In this study, 200 patients with opioid dependency who attended to the addiction clinics affiliated to the Lorestan University of Medical Science were selected by convenience sampling method from December to February in 2013. Data collected by using instruments including Demographic Questionnaire and Zohar-fineberg screening questionnaire obsession. Descriptive and inferential statistical indicators by spss-20 software were used for data analysis. Results: In this study all participants were man. The mean and standard deviation of the respondents’ age and term drug abuse were in order 41/72±11/96 and 12/02±8/87. Patients were % 71 married, % 56 self-employed and in terms of education % 43 level of diploma. Also, 31 patients were with (% 15/05 obsessive-compulsive disorder and 169 patients were (% 84/5 without obsessive-compulsive disorder. Conclusion: In creating drug abuse disorder, other disorders and symptoms may contribute and have important roles. Therefore, diagnosis and attention to it is important. Accordingly, clinical specialists on the results of such research design appropriate clinical trials or modify of existing interventions.

  2. National Information Centre for Marine Sciences (NICMAS) - An excellent source of information for aquaculturists

    Digital Repository Service at National Institute of Oceanography (India)

    Tapaswi, M.P.

    stream_size 4 stream_content_type text/plain stream_name Proc_Natl_Workshop_Aquacult_WeeK_1998_258.pdf.txt stream_source_info Proc_Natl_Workshop_Aquacult_WeeK_1998_258.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

  3. Biomass: An Alternative Source of Energy for Eighth or Ninth Grade Science.

    Science.gov (United States)

    Heyward, Lillie; Murff, Marye

    This teaching unit develops the possibility of using biomass as an alternative source of energy. The concept of biomass is explained and the processes associated with its conversion to energy are stated. Suggestions for development of biomass technology in different geographic areas are indicated. Lessons for 6 days are presented for use with…

  4. Canadian Neutron Source (CNS): a research reactor solution for medical isotopes and neutrons for science

    International Nuclear Information System (INIS)

    Chapman, D.

    2009-01-01

    This presentation describes a dual purpose research facility at the University of Saskatchewan for Canada for the production of medical isotopes and neutrons for scientific research. The proposed research reactor is intended to supply most of Canada's medical isotope requirements and provide a neutron source for Canada's research community. Scientific research would include materials research, biomedical research and imaging.

  5. E-GRANTHALAYA: LIBRARY INFORMATION SCIENCE OPEN SOURCE AUTOMATION SOFTWARE: AN OVERVIEW

    OpenAIRE

    Umaiyorubagam, R.; JohnAnish, R; Jeyapragash, B

    2015-01-01

    The paper describes that Free Library software’s availability on-line. The open source software is available on three categories.They are library automation software, Digital Library software and integrated library packages. The paper discusses these aspect in detail.

  6. Overcoming the socio-technical divide: A long-term source of hope in feminist studies of computer science

    Directory of Open Access Journals (Sweden)

    Corinna Bath

    2008-07-01

    Full Text Available The dichotomy of the technical and the social is strongly gendered in western thought. Therefore, potential dissolutions of the socio-technical divide have always been a source of hope from a feminist point of view. The starting point of this contribution are recent trends in the computer science discipline, such as the new interaction paradigm and the concept of ‘social machines’, which seem to challenge the borderline of the technical as opposed to the social and, thereby, refresh promises for changes in the gender-technology relationship. The paper primarily explores the entanglement between the socio-technical divide and the structural-symbolic gender order on the basis of historical academic discourses in German computer science. Thereby, traditions of critical thinking in the German computer science discipline and related feminist voices are introduced. A reflection of these historical discourses indicates that ‘interaction’ and ‘social machines’ are contested zones, which call for feminist intervention.

  7. The Prevalence of Abnormal Pap Smears in females Referred to Health Centers Affiliated to Medical Sciences During the Years 2012 to 2016

    Directory of Open Access Journals (Sweden)

    Zahra Massomi

    2016-06-01

    Full Text Available Background and Objectives: Cervical cancer is one of the most important female reproductive system diseases. The aim of this study was to estimate the prevalence of abnormal Pap smears of pregnant females in public health centers and hospitals of Hamadan. Materials and Methods: In a retrospective study, 36046 Pap smears of females was extracted from the records referred to government health centers affiliated to Hamadan University of Medical Sciences and Fatemiyeh Hospital Hamadan, between 2012 and 2016. After checking the results of Pap smear, abnormal information (605 cases were collected and investigated. Data were then analyzed using the SPSS21-software and descriptive statistics and one-way Analysis of Variance (ANOVA. Results: The majority of females with abnormal Pap smear results (%30.4 were aged 45 to 36 years, and %48.6 of females with abnormal Pap smear had parity (1-3. From a total of 36046 cases, 605 cases of abnormal Pap smear were observed. The highest and lowest frequencies of abnormal Pap smear were related to ASCUS and LSIL, at a prevalence of %78 and %1, respectively. There was a positive relationship between abnormal Pap smear results and age (P = 0.037. Conclusions: The prevalence of abnormal Pap smear in Hamadan was %1.67. Malignant cervical cancer and invasive cancer risk increased with age, hence, screening and Pap smear, especially from age 35 and above, is recommended.

  8. Beyond agency: sources of knowing and learning in children's science- and technology-related problem solving

    Science.gov (United States)

    Kim, Mijung; Roth, Wolff-Michael

    2016-12-01

    In (science) education, primacy is given to agency, the human capability to act and, in this, to learn. However, phenomenological philosophers and societal-historical psychologists point out that agency, the purposeful (intentional) engagement with the world, is only the effect of a much more profound capacity: passibility, the capacity to be affected. In this study, we begin with what has been recognized as a fundamental condition of learning: learners cannot intentionally orient to the learning outcome because they inherently do not know it so that that knowledge cannot be the object of intention. In this study, we provide evidence for three empirically grounded assertions: (a) children do not intend new knowledge and understanding, which instead give themselves in and through materials and material configurations; (b) knowing-how is received (as unintended gifts) because our bodies are endowed with passibility, the capability to be affected; and (c) the new knowledge and understanding exists as and in social relation first. We suggest implications for engineering design in science classrooms.

  9. [Pharmacy, one of the emerging sources of new science of technology].

    Science.gov (United States)

    Charlot, Colette

    2015-01-01

    Linking pharmacy and oenology seems to be paradox. The school of Medicine and Pharmacy owe their fame to the historical context of the Languedocian Universities. The role of their naturalist professors is less known. Dr Chaptal's thesis discusses the wine chemical constituents. In 1801 he published a book entitled "the Art of making, managing and perfecting wine", inventor of a distillation machine, his name become an eponym "the chaptalisation", which is specific process, for regions less exposed to sunlight, showing that sugar in the must is needed to obtain alcohol. Jules Emile Planchon, professor of botanic science at the Superior School of Pharmacy will discoverer the parasite disease of the phylloxera, a parasite that destroy vineyards. The cure will be the American grafting. The list of professors who worked on vineyards related frauds and diseases is long. Once Analytical chemistry has become part of the curriculum universities, pharmacists, started investigating wine analysis. It will be part of Bromatology, the science of food ingredients. Pharmacists were then able to carry out the first wine analyses sin their laboratory. It is at that time that Paul Jaulmes, professor of Analytical Chemistry who became Director of the international office of vineyards and Wine (OIV) proposed alongside Prof Nègre, director of the National School of Agronomy, the initiation in 1955 of a new diploma oenology. As a renowned toxicologist, Prof. Jaulmes will lead the committee in charge of the oenology Standards.

  10. Capillary plasma jet: A low volume plasma source for life science applications

    Energy Technology Data Exchange (ETDEWEB)

    Topala, I., E-mail: ionut.topala@uaic.ro, E-mail: tmnagat@ipc.shizuoka.ac.jp [Alexandru Ioan Cuza University of Iasi, Faculty of Physics, Iasi Plasma Advanced Research Center (IPARC), Bd. Carol I No. 11, Iasi 700506 (Romania); Nagatsu, M., E-mail: ionut.topala@uaic.ro, E-mail: tmnagat@ipc.shizuoka.ac.jp [Graduate School of Science and Technology, Shizuoka University, 3-5-1 Johoku, Naka-ku, Hamamatsu 432-8561 (Japan)

    2015-02-02

    In this letter, we present results from multispectroscopic analysis of protein films, after exposure to a peculiar plasma source, i.e., the capillary plasma jet. This plasma source is able to generate very small pulsed plasma volumes, in kilohertz range, with characteristic dimensions smaller than 1 mm. This leads to specific microscale generation and transport of all plasma species. Plasma diagnosis was realized using general electrical and optical methods. Depending on power level and exposure duration, this miniature plasma jet can induce controllable modifications to soft matter targets. Detailed discussions on protein film oxidation and chemical etching are supported by results from absorption, X-ray photoelectron spectroscopy, and microscopy techniques. Further exploitation of principles presented here may consolidate research interests involving plasmas in biotechnologies and plasma medicine, especially in patterning technologies, modified biomolecule arrays, and local chemical functionalization.

  11. Capillary plasma jet: A low volume plasma source for life science applications

    Science.gov (United States)

    Topala, I.; Nagatsu, M.

    2015-02-01

    In this letter, we present results from multispectroscopic analysis of protein films, after exposure to a peculiar plasma source, i.e., the capillary plasma jet. This plasma source is able to generate very small pulsed plasma volumes, in kilohertz range, with characteristic dimensions smaller than 1 mm. This leads to specific microscale generation and transport of all plasma species. Plasma diagnosis was realized using general electrical and optical methods. Depending on power level and exposure duration, this miniature plasma jet can induce controllable modifications to soft matter targets. Detailed discussions on protein film oxidation and chemical etching are supported by results from absorption, X-ray photoelectron spectroscopy, and microscopy techniques. Further exploitation of principles presented here may consolidate research interests involving plasmas in biotechnologies and plasma medicine, especially in patterning technologies, modified biomolecule arrays, and local chemical functionalization.

  12. The deeper sources of political conflict: evidence from the psychological, cognitive, and neuro-sciences.

    Science.gov (United States)

    Hibbing, John R; Smith, Kevin B; Peterson, Johnathan C; Feher, Balazs

    2014-03-01

    Political disputes ruin family reunions, scuttle policy initiatives, and spur violence and even terrorism. We summarize recent research indicating that the source of political differences can be found in biologically instantiated and often subthreshold predispositions as reflected in physiological, cognitive, and neural patterns that incline some people toward innovation and others toward conservatism. These findings suggest the need to revise traditional views that maintain that political opinions are the product of rational, conscious, socialized thought. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Cultures of Science and Technology in the Trading Zone: Biodiversity and Open Source Development

    OpenAIRE

    Heaton , Lorna; Dias da Silva , Patrícia

    2016-01-01

    International audience; This paper explores the work of building open source biodiversity information infrastructure. We analyse collaboration between a Canadian team and a Brazilian one. In particular we focus on the use of WingLongitude, a GitHub space, as a trading zone within which the two teams co-developed solutions. We show how the choice to work in a neutral space, belonging to everyone, and the use of display, representation and assemblage practices enabled sharing of some infrastruc...

  14. Sheath physics and materials science results from recent plasma source ion implantation experiments

    International Nuclear Information System (INIS)

    Conrad, J.R.; Radtke, J.L.; Dodd, R.A.; Worzala, F.J.

    1987-01-01

    Plasma Source Ion Implantation (PSII) is a surface modification technique which has been optimized for ion-beam processing of materials. PSII departs radically from conventional implantation by circumventing the line of sight restriction inherent in conventional ion implantation. The authors used PSII to implant cutting tools and dies and have demonstrated substantial improvements in lifetime. Recent results on plasma physics scaling laws, microstructural, mechanical, and tribological properties of PSII-implanted materials are presented

  15. Linac Coherent Light Source soft x-ray materials science instrument optical design and monochromator commissioning

    Czech Academy of Sciences Publication Activity Database

    Heimann, P.; Krupin, O.; Schlotter, W.F.; Turner, J.; Krzywinski, J.; Sorgenfrei, F.; Messerschmidt, M.; Bernstein, D.; Chalupský, Jaromír; Hájková, Věra; Hau-Riege, S.; Holmes, M.; Juha, Libor; Kelez, N.; Lüning, J.; Nordlund, D.; Perea, M.F.; Scherz, A.; Soufli, R.; Wurth, W.; Rowen, M.

    2011-01-01

    Roč. 82, č. 9 (2011), 093104/1-093104/8 ISSN 0034-6748 R&D Projects: GA MŠk(CZ) ME10046 Institutional research plan: CEZ:AV0Z10100523 Keywords : diffraction gratings * light sources * linear accelerators * optical materials * x-ray monochromators * x-ray optics Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.367, year: 2011

  16. Source of learning basic clinical skills by medical interns Tehran University of Medical Sciences

    Directory of Open Access Journals (Sweden)

    Meshkani Z

    2004-07-01

    Full Text Available Background: Effective clinical teaching is a major objective in general practitioner’s education at medical schools. Purpose: To identify the sources of clinical skills learning that medical student experience Methods: In this cross sectional study, interns of Tehran medical university who spent at least 12 months of their internship answered a questionnaire on the sources of clinical skills training. Chi2 test was used to examine the association of source of learning and students,’ specification such as sex, score of pre –internship exam, and marital status. Results: All 250 interns who were eligible participated. Over all 46.60% interns learned their clinical skills from residents or clinical teachers, 29.61% observed others performing the procedures, 16.25 learned the skills from hospital staff or nurses, 7.54% practiced their knowledge when confronted to an emergency situation Conclusion: Our results warrant a more attentive approach to clinical skills (specially procedural skills training Key words: LEARNING RESOURCES

  17. Acidic precipitation. Volume 3: Sources, deposition, and canopy interactions. Advances in environmental science

    Energy Technology Data Exchange (ETDEWEB)

    Lindberg, S.E.; Page, A.L.; Norton, S.A. (eds.)

    1990-01-01

    As has been the case with many environmental issues of the twentieth century, acidic precipitation has its origin in emissions to the atmosphere of numerous compounds from both natural and man-made sources. This volume emphasizes the atmospheric aspects of acidic precipitation and all that this term has come to include (e.g. toxic gases such as ozone, trace metals, aluminum, and oxides of nitrogen). It progresses from emissions of the precursors of acidic precipitation to their eventual deposition on environmental surfaces. The chapters describe the sources of acidic and basic airborne substances, their interactions in the atmosphere and with rain droplets, and their reactions with other airborne constituents such as aluminum and other metals. Also discussed are the use of metals as tracers of sources of the precursors of acidic precipitation and as tracers of historical deposition rates, the processes controlling the removal of airborne material as dry deposition and deposition interactions with the forest canopy, and past and future trends in atmospheric emissions and options for their abatement.

  18. Reference Services in Australian Academic Libraries are Becoming More Multifaceted, A Review of: Burke, L. “Models of Reference Services in Australian Academic Libraries.” Journal of Librarianship and Information Science 40.4 (2008: 269‐86.

    Directory of Open Access Journals (Sweden)

    David Herron

    2009-09-01

    Full Text Available Objective – To investigate the current organizational models for reference work in Australian academic libraries, and how these reference services are staffed.Design – Mixed methods.Setting – Academic universities in Australia.Subjects – Forty Council of Australian University Librarians (CAUL member libraries.Methods – A literature study was undertaken to (1 find a definition of reference services and (2 explore the development of reference service models over time. Statistics from the CAUL member libraries were studied for trends in student population and number of academic and library staff. A web‐based survey, with questions based on the findings in the literature study, was then distributed to the 40 Australian university libraries in 2006. Respondents were asked when the library commenced different reference services in five areas: formats in which the library received and responded to reference queries, information literacy, subject specialization, liaison activities, and collection development. Respondents also answered questions about the organization of the reference department, including: whether they had a separate or integrated model; the size of the reference collections; if they had a librarian dedicated to supporting students studying in remote or distant mode; if the interlibrary loans department was part of the suite of reference services; and if they had a mission or statement of purpose for their reference services department.Main Results – Based on the literature study, the working definition of reference services (1 for the project was “all activities which assist in providing relevant and appropriate information services to patrons” (270, including:•All interactions with patrons to assist them in their searches for information in all media types.•All training by librarians of patrons to be able to access information for themselves.•Activities to help the library stay informed of relevant developments

  19. Growth references

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    A growth reference describes the variation of an anthropometric measurement within a group of individuals. A reference is a tool for grouping and analyzing data and provides a common basis for comparing populations.1 A well known type of reference is the age-conditional growth diagram. The

  20. Sources of method bias in social science research and recommendations on how to control it.

    Science.gov (United States)

    Podsakoff, Philip M; MacKenzie, Scott B; Podsakoff, Nathan P

    2012-01-01

    Despite the concern that has been expressed about potential method biases, and the pervasiveness of research settings with the potential to produce them, there is disagreement about whether they really are a problem for researchers in the behavioral sciences. Therefore, the purpose of this review is to explore the current state of knowledge about method biases. First, we explore the meaning of the terms "method" and "method bias" and then we examine whether method biases influence all measures equally. Next, we review the evidence of the effects that method biases have on individual measures and on the covariation between different constructs. Following this, we evaluate the procedural and statistical remedies that have been used to control method biases and provide recommendations for minimizing method bias.

  1. Audiovisual heritage preservation in Earth and Space Science Informatics: Videos from Free and Open Source Software for Geospatial (FOSS4G) conferences in the TIB|AV-Portal.

    Science.gov (United States)

    Löwe, Peter; Marín Arraiza, Paloma; Plank, Margret

    2016-04-01

    The influence of Free and Open Source Software (FOSS) projects on Earth and Space Science Informatics (ESSI) continues to grow, particularly in the emerging context of Data Science or Open Science. The scientific significance and heritage of FOSS projects is only to a limited amount covered by traditional scientific journal articles: Audiovisual conference recordings contain significant information for analysis, reference and citation. In the context of data driven research, this audiovisual content needs to be accessible by effective search capabilities, enabling the content to be searched in depth and retrieved. Thereby, it is ensured that the content producers receive credit for their efforts within the respective communities. For Geoinformatics and ESSI, one distinguished driver is the OSGeo Foundation (OSGeo), founded in 2006 to support and promote the interdisciplinary collaborative development of open geospatial technologies and data. The organisational structure is based on software projects that have successfully passed the OSGeo incubation process, proving their compliance with FOSS licence models. This quality assurance is crucial for the transparent and unhindered application in (Open) Science. The main communication channels within and between the OSGeo-hosted community projects for face to face meetings are conferences on national, regional and global scale. Video recordings have been complementing the scientific proceedings since 2006. During the last decade, the growing body of OSGeo videos has been negatively affected by content loss, obsolescence of video technology and dependence on commercial video portals. Even worse, the distributed storage and lack of metadata do not guarantee concise and efficient access of the content. This limits the retrospective analysis of video content from past conferences. But, it also indicates a need for reliable, standardized, comparable audiovisual repositories for the future, as the number of OSGeo projects

  2. Selection and evaluation of reference genes for RT-qPCR expression studies on Burkholderia tropica strain Ppe8, a sugarcane-associated diazotrophic bacterium grown with different carbon sources or sugarcane juice.

    Science.gov (United States)

    da Silva, Paula Renata Alves; Vidal, Marcia Soares; de Paula Soares, Cleiton; Polese, Valéria; Simões-Araújo, Jean Luís; Baldani, José Ivo

    2016-11-01

    Among the members of the genus Burkholderia, Burkholderia tropica has the ability to fix nitrogen and promote sugarcane plant growth as well as act as a biological control agent. There is little information about how this bacterium metabolizes carbohydrates as well as those carbon sources found in the sugarcane juice that accumulates in stems during plant growth. Reverse transcription quantitative PCR (RT-qPCR) can be used to evaluate changes in gene expression during bacterial growth on different carbon sources. Here we tested the expression of six reference genes, lpxC, gyrB, recA, rpoA, rpoB, and rpoD, when cells were grown with glucose, fructose, sucrose, mannitol, aconitic acid, and sugarcane juice as carbon sources. The lpxC, gyrB, and recA were selected as the most stable reference genes based on geNorm and NormFinder software analyses. Validation of these three reference genes during strain Ppe8 growth on the same carbon sources showed that genes involved in glycogen biosynthesis (glgA, glgB, glgC) and trehalose biosynthesis (treY and treZ) were highly expressed when Ppe8 was grown in aconitic acid relative to other carbon sources, while otsA expression (trehalose biosynthesis) was reduced with all carbon sources. In addition, the expression level of the ORF_6066 (gluconolactonase) gene was reduced on sugarcane juice. The results confirmed the stability of the three selected reference genes (lpxC, gyrB, and recA) during the RT-qPCR and also their robustness by evaluating the relative expression of genes involved in glycogen and trehalose biosynthesis when strain Ppe8 was grown on different carbon sources and sugarcane juice.

  3. The advanced light source: America's brightest light for science and industry

    International Nuclear Information System (INIS)

    Cross, J.; Lawler, G.

    1994-03-01

    America's brightest light comes from the Advanced Light Source (ALS), a national facility for scientific research, product development, and manufacturing. Completed in 1993, the ALS produces light in the ultraviolet and x-ray regions of the spectrum. Its extreme brightness provides opportunities for scientific and technical progress not possible anywhere else. Technology is poised on the brink of a major revolution - one in which vital machine components and industrial processes will be drastically miniaturized. Industrialized nations are vying for leadership in this revolution - and the huge economic rewards the leaders will reap

  4. Openness, Web 2.0 Technology, and Open Science

    Science.gov (United States)

    Peters, Michael A.

    2010-01-01

    Open science is a term that is being used in the literature to designate a form of science based on open source models or that utilizes principles of open access, open archiving and open publishing to promote scientific communication. Open science increasingly also refers to open governance and more democratized engagement and control of science…

  5. Short-wavelength free-electron laser sources and science: a review

    Science.gov (United States)

    Seddon, E. A.; Clarke, J. A.; Dunning, D. J.; Masciovecchio, C.; Milne, C. J.; Parmigiani, F.; Rugg, D.; Spence, J. C. H.; Thompson, N. R.; Ueda, K.; Vinko, S. M.; Wark, J. S.; Wurth, W.

    2017-11-01

    This review is focused on free-electron lasers (FELs) in the hard to soft x-ray regime. The aim is to provide newcomers to the area with insights into: the basic physics of FELs, the qualities of the radiation they produce, the challenges of transmitting that radiation to end users and the diversity of current scientific applications. Initial consideration is given to FEL theory in order to provide the foundation for discussion of FEL output properties and the technical challenges of short-wavelength FELs. This is followed by an overview of existing x-ray FEL facilities, future facilities and FEL frontiers. To provide a context for information in the above sections, a detailed comparison of the photon pulse characteristics of FEL sources with those of other sources of high brightness x-rays is made. A brief summary of FEL beamline design and photon diagnostics then precedes an overview of FEL scientific applications. Recent highlights are covered in sections on structural biology, atomic and molecular physics, photochemistry, non-linear spectroscopy, shock physics, solid density plasmas. A short industrial perspective is also included to emphasise potential in this area. Dedicated to John M J Madey (1943-2016) and Rodolfo Bonifacio (1940-2016) whose perception, drive and perseverance paved the way for the realisation and development of short-wavelength free-electron lasers.

  6. Alaska earthquake source for the SAFRR tsunami scenario: Chapter B in The SAFRR (Science Application for Risk Reduction) Tsunami Scenario

    Science.gov (United States)

    Kirby, Stephen; Scholl, David; von Huene, Roland E.; Wells, Ray

    2013-01-01

    Tsunami modeling has shown that tsunami sources located along the Alaska Peninsula segment of the Aleutian-Alaska subduction zone have the greatest impacts on southern California shorelines by raising the highest tsunami waves for a given source seismic moment. The most probable sector for a Mw ~ 9 source within this subduction segment is between Kodiak Island and the Shumagin Islands in what we call the Semidi subduction sector; these bounds represent the southwestern limit of the 1964 Mw 9.2 Alaska earthquake rupture and the northeastern edge of the Shumagin sector that recent Global Positioning System (GPS) observations indicate is currently creeping. Geological and geophysical features in the Semidi sector that are thought to be relevant to the potential for large magnitude, long-rupture-runout interplate thrust earthquakes are remarkably similar to those in northeastern Japan, where the destructive Mw 9.1 tsunamigenic earthquake of 11 March 2011 occurred. In this report we propose and justify the selection of a tsunami source seaward of the Alaska Peninsula for use in the Tsunami Scenario that is part of the U.S. Geological Survey (USGS) Science Application for Risk Reduction (SAFRR) Project. This tsunami source should have the potential to raise damaging tsunami waves on the California coast, especially at the ports of Los Angeles and Long Beach. Accordingly, we have summarized and abstracted slip distribution from the source literature on the 2011 event, the best characterized for any subduction earthquake, and applied this synoptic slip distribution to the similar megathrust geometry of the Semidi sector. The resulting slip model has an average slip of 18.6 m and a moment magnitude of Mw = 9.1. The 2011 Tohoku earthquake was not anticipated, despite Japan having the best seismic and geodetic networks in the world and the best historical record in the world over the past 1,500 years. What was lacking was adequate paleogeologic data on prehistoric earthquakes

  7. JGrass-NewAge hydrological system: an open-source platform for the replicability of science.

    Science.gov (United States)

    Bancheri, Marialaura; Serafin, Francesco; Formetta, Giuseppe; Rigon, Riccardo; David, Olaf

    2017-04-01

    JGrass-NewAge is an open source semi-distributed hydrological modelling system. It is based on the object modelling framework (OMS version 3), on the JGrasstools and on the Geotools. OMS3 allows to create independent packages of software which can be connected at run-time in a working modelling solution. These components are available as library/dependency or as repository to fork in order to add further features. Different tools are adopted to make easier the integration, the interoperability and the use of each package. Most of the components are Gradle integrated, since it represents the state-of-art of the building systems, especially for Java projects. The continuous integration is a further layer between local source code (client-side) and remote repository (server-side) and ensures the building and the testing of the source code at each commit. Finally, the use of Zenodo makes the code hosted in GitHub unique, citable and traceable, with a defined DOI. Following the previous standards, each part of the hydrological cycle is implemented in JGrass-NewAge as a component that can be selected, adopted, and connected to obtain a user "customized" hydrological model. A variety of modelling solutions are possible, allowing a complete hydrological analysis. Moreover, thanks to the JGrasstools and the Geotools, the visualization of the data and of the results using a selected GIS is possible. After the geomorphological analysis of the watershed, the spatial interpolation of the meteorological inputs can be performed using both deterministic (IDW) and geostatistic (Kriging) algorithms. For the radiation balance, the shortwave and longwave radiation can be estimated, which are, in turn, inputs for the simulation of the evapotranspiration, according to Priestly-Taylor and Penman-Monteith formulas. Three degree-day models are implemented for the snow melting and SWE. The runoff production can be simulated using two different components, "Adige" and "Embedded Reservoirs

  8. Earth-Base: A Free And Open Source, RESTful Earth Sciences Platform

    Science.gov (United States)

    Kishor, P.; Heim, N. A.; Peters, S. E.; McClennen, M.

    2012-12-01

    This presentation describes the motivation, concept, and architecture behind Earth-Base, a web-based, RESTful data-management, analysis and visualization platform for earth sciences data. Traditionally web applications have been built directly accessing data from a database using a scripting language. While such applications are great at bring results to a wide audience, they are limited in scope to the imagination and capabilities of the application developer. Earth-Base decouples the data store from the web application by introducing an intermediate "data application" tier. The data application's job is to query the data store using self-documented, RESTful URIs, and send the results back formatted as JavaScript Object Notation (JSON). Decoupling the data store from the application allows virtually limitless flexibility in developing applications, both web-based for human consumption or programmatic for machine consumption. It also allows outside developers to use the data in their own applications, potentially creating applications that the original data creator and app developer may not have even thought of. Standardized specifications for URI-based querying and JSON-formatted results make querying and developing applications easy. URI-based querying also allows utilizing distributed datasets easily. Companion mechanisms for querying data snapshots aka time-travel, usage tracking and license management, and verification of semantic equivalence of data are also described. The latter promotes the "What You Expect Is What You Get" (WYEIWYG) principle that can aid in data citation and verification.

  9. Workshop on materials science and the physics of non-conventional energy sources

    International Nuclear Information System (INIS)

    Furlan, G.; Nobili, D.; Sayigh, A.M.; Seraphin, B.O.

    1989-01-01

    The non-conventional energy activities started in 1974, on the island of Procida, Italy. About 50 leading physicists and engineers got together for two weeks in September to discuss the states of the art and consult with each other about various devices and ways of energy conversion. The esteemed Nobel Prize Laureate, Professor Abdus Salam, accepted to have the first meeting on non-conventional energy at the ICTP, Trieste, in September 1977. In 1987, the meeting was once again back in Trieste, Italy. Also, during the even years since 1978 until 1986, meetings were held in Trieste in the French language. The results of the last 10 years at ICTP are very clear to all fellow scientist and engineers. Some 150 applicants are chosen every year. The workshop is being graded gradually to emphasize the high technology and up-to-date achievements in the field. A good proportion of the physicists who were with us from the beginning are now top experts in the field and in charge of existing programmes in their own countries. The present programme emphasized the following topics: Material Science; Solar Energy Conversion with concentration on Photovoltaic Conversion; and Energy Storage. Refs, figs and tabs

  10. The low-cost microwave plasma sources for science and industry applications

    Science.gov (United States)

    Tikhonov, V. N.; Aleshin, S. N.; Ivanov, I. A.; Tikhonov, A. V.

    2017-11-01

    Microwave plasma torches proposed in the world market are built according to a scheme that can be called classical: power supply - magnetron head - microwave isolator with water load - reflected power meter - matching device - actual plasma torch - sliding short circuit. The total cost of devices from this list with a microwave generator of 3 kW in the performance, for example, of SAIREM (France), is about 17,000 €. We have changed the classical scheme of the microwave plasmathrone and optimised design of the waveguide channel. As a result, we can supply simple and reliable sources of microwave plasma (complete with our low-budget microwave generator up to 3 kW and a simple plasmathrone of atmospheric pressure) at a price from 3,000 €.

  11. Environmental Remediation Science at Beamline X26A at the National Synchrotron Light Source- Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Bertsch, Paul [Univ. of Kentucky, Lexington, KY (United States)

    2013-11-07

    The goal of this project was to provide support for an advanced X-ray microspectroscopy facility at the National Synchrotron Light Source, Brookhaven National Laboratory. This facility is operated by the University of Chicago and the University of Kentucky. The facility is available to researchers at both institutions as well as researchers around the globe through the general user program. This facility was successfully supported during the project period. It provided access to advanced X-ray microanalysis techniques which lead to fundamental advances in understanding the behavior of contaminants and geochemistry that is applicable to environmental remediation of DOE legacy sites as well as contaminated sites around the United States and beyond.

  12. Impact of the Diamond Light Source on research in Earth and environmental sciences: current work and future perspectives.

    Science.gov (United States)

    Burke, Ian T; Mosselmans, J Frederick W; Shaw, Samuel; Peacock, Caroline L; Benning, Liane G; Coker, Victoria S

    2015-03-06

    Diamond Light Source Ltd celebrated its 10th anniversary as a company in December 2012 and has now accepted user experiments for over 5 years. This paper describes the current facilities available at Diamond and future developments that enhance its capacities with respect to the Earth and environmental sciences. A review of relevant research conducted at Diamond thus far is provided. This highlights how synchrotron-based studies have brought about important advances in our understanding of the fundamental parameters controlling highly complex mineral-fluid-microbe interface reactions in the natural environment. This new knowledge not only enhances our understanding of global biogeochemical processes, but also provides the opportunity for interventions to be designed for environmental remediation and beneficial use.

  13. Superconducting magnet performance for 28 GHz electron cyclotron resonance ion source developed at the Korea Basic Science Institute.

    Science.gov (United States)

    Park, Jin Yong; Choi, Seyong; Lee, Byoung-Seob; Yoon, Jang-Hee; Ok, Jung-Woo; Kim, Byoung Chul; Shin, Chang Seouk; Ahn, Jung Keun; Won, Mi-Sook

    2014-02-01

    A superconducting magnet for use in an electron cyclotron resonance ion source was developed at the Korea Basic Science Institute. The superconducting magnet is comprised of three solenoids and a hexapole magnet. According to the design value, the solenoid magnets can generate a mirror field, resulting in axial magnetic fields of 3.6 T at the injection area and 2.2 T at the extraction region. A radial field strength of 2.1 T can also be achieved by hexapole magnet on the plasma chamber wall. NbTi superconducting wire was used in the winding process following appropriate techniques for magnet structure. The final assembly of the each magnet involved it being vertically inserted into the cryostat to cool down the temperature using liquid helium. The performance of each solenoid and hexapole magnet was separately verified experimentally. The construction of the superconducting coil, the entire magnet assembly for performance testing and experimental results are reported herein.

  14. Soft X-Ray Microscopy and Spectroscopy at the Molecular Environmental Science Beamline at the Advanced Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Bluhm, Hendrik; Andersson, Klas J.; Araki, Tohru; Benzerara, Karim; Brown, Gordon E.; Dynes, Jay J.; Ghosal, Sutapa; Gilles, Mary K.; Hansen, Hans C.; Hemminger, J. C.; Hitchcock, Adam P.; Ketteler, Guido; Kilcoyne, Arthur L.; Kneedler, Eric M.; Lawrence, John R.; Leppard, Gary G.; Majzlam, Juraj; Mun, B. S.; Myneni, Satish C.; Nilsson, Anders R.; Ogasawara, Hirohito; Ogletree, D. F.; Pecher, Klaus H.; Salmeron, Miquel B.; Shuh, David K.; Tonner, Brian; Tyliszczak, Tolek; Warwick, Tony; Yoon, T. H.

    2006-02-01

    We present examples of the application of synchrotron-based spectroscopies and microscopies to environmentally-relevant samples. The experiments were performed at the Molecular Environmental Science beamline (11.0.2) at the Advanced Light Source, Lawrence Berkeley National Laboratory. Examples range from the study of water monolayers on Pt(111) single crystal surfaces using X-ray emission spectroscopy and the examination of alkali halide solution/water vapor interfaces using ambient pressure photoemission spectroscopy, to the investigation of actinides, river-water biofilms, Al-containing colloids and mineral-bacteria suspensions using scanning transmission X-ray spectromicroscopy. The results of our experiments show that spectroscopy and microscopy in the soft X-ray energy range are excellent tools for the investigation of environmentally relevant samples under realistic conditions, i.e. with water or water vapor present at ambient temperature.

  15. [Information flow between medical and social sciences].

    Science.gov (United States)

    Schubert, András; Somogyi, Anikó

    2014-12-28

    In order to reveal impacts of natural and social sciences on each other, the authors examined connections between fields of medical and social sciences using a search for references and citations of scientific publication. 1. The largest affinity between the medical and social sciences was found between neurosciences and psychology, but there was a significant affinity between clinical sciences and general social sciences, as well. 2. The example of General & Internal Medicine papers in the topics of "diabetes" suggests that in the period 2001-2010 the share of references to social sciences was significantly increased. In the meantime, social science papers in the same topics contained references to Clinical Medicine papers in a constantly high percentage. 3. In the sample under study, the age distribution of social science papers in the references did not differ significantly from that of the other sources. 4. Share of references to social science papers was found to be extremely high among Hungarian General & Internal Medicine papers in the topics of "diabetes". This finding still requires clarification, nevertheless, since e.g. it was not supported by an institutional comparison including the largest Hungarian medical research university. 5. The intensity of the reference/citation mediated information flows between the Hungarian Medical Journal, Orvosi Hetilap and social sciences appears to be in accordance with the current international trends.

  16. Locally-sourced: How climate science can collaborate with arts & humanities museums to achieve widespread public trust and communication

    Science.gov (United States)

    Walker, C. G.

    2017-12-01

    Local history, art and culture museums have a large role to play in climate science communication. Unfortunately, in our current society, scientific evidence and logic is not universally accepted as truth. These messages can be dispersed through trusted institutional allies like humanities and arts museums. There are many reasons for scientific institutions to work with humanities and arts museums of all sizes, especially local museums that have personal, trusted relationships with their communities. First, museums (by definition) are public educators; the work that they do is to disperse challenging information in an understandable way to a wide array of audiences. Museums are located in every state, with over 35,000 museums in the nation; 26% of those are located in rural areas. These museums serve every demographic and age range, inspiring even those with difficulty accepting climate change information to act. Second, in a recent public opinion survey commissioned by the American Alliance of Museums, museums - especially history museums - are considered the most trustworthy source of information in America, rated higher than newspapers, nonprofit researchers, the U.S. government, or academic researchers. Scientific institutions must collaborate with local museums to improve science communication going forward. Not only will important climate and sustainability research be dispersed via trusted sources, but the public will engage with this information in large numbers. In 2012 alone, over 850 million people visited museums - more than the attendance for all major league sports and theme parks combined. A recent impact study shows that history and art museums, especially, are not seen as "having a political agenda," with over 78% of the public seeing these museums as trusted institutions. There are many ways in which the scientific community can collaborate with "the arts." This presentation will speak to the larger benefit of working with sister arts & humanities

  17. [Reference citation].

    Science.gov (United States)

    Brkić, Silvija

    2013-01-01

    Scientific and professional papers represent the information basis for scientific research and professional work. References important for the paper should be cited within the text, and listed at the end of the paper. This paper deals with different styles of reference citation. Special emphasis was placed on the Vancouver Style for reference citation in biomedical journals established by the International Committee of Medical Journal Editors. It includes original samples for citing various types of articles, both printed and electronic, as well as recommendations related to reference citation in accordance with the methodology and ethics of scientific research and guidelines for preparing manuscripts for publication.

  18. CUAHSI-HIS: an Internet based system to facilitate public discovery, access, and exploration of different water science data sources

    Science.gov (United States)

    Arrigo, J. S.; Hooper, R. P.; Choi, Y.; Ames, D. P.; Kadlec, J.; Whiteaker, T.

    2011-12-01

    "Water is everywhere." This sentiment underscores the importance of instilling hydrologic and earth science literacy in educators, students, and the general public, but also presents challenges for water scientists and educators. Scientific data about water is collected and distributed by several different sources, from federal agencies to scientific investigators to citizen scientists. As competition for limited water resources increase, increasing access to and understanding of the wealth of information about the nation's and the world's water will be critical. The CUAHSI-HIS system is a web based system for sharing hydrologic data that can help address this need. HydroDesktop is a free, open source application for finding, getting, analyzing and using hydrologic data from the CUAHSI-HIS system. It works with HydroCatalog which indexes the data to find out what data exists and where it is, and then it retrieves the data from HydroServers where it is stored communicating using WaterOneFlow web services. Currently, there are over 65 services registered in HydroCatalog providing central discovery of water data from several federal and state agencies, university projects, and other sources. HydroDesktop provides a simplified GIS that allows users to incorporate spatial data, and simple analysis tools to facilitate graphing and visualization. HydroDesktop is designed to be useful for a number of different groups of users with a wide variety of needs and skill levels including university faculty, graduate and undergraduate students, K-12 students, engineering and scientific consultants, and others. This presentation will highlight some of the features of HydroDesktop and the CUAHSI-HIS system that make it particularly appropriate for use in educational and public outreach settings, and will present examples of educational use. The incorporation of "real data," localization to an area of interest, and problem-based learning are all recognized as effective strategies for

  19. The Evolution and Popularity of Science Play with Specific Reference to Marlowe’s Dr. Faustus, Brecht’s Galileo and Frayn’s Copenhagen

    Directory of Open Access Journals (Sweden)

    Khalid Ahmad Yas

    2016-11-01

    Full Text Available This paper traces theatrically and statistically the evolution and popularity of science play from 1604, the publication of Marlowe’s Dr Faustus, to 2005 revealing reasons behind this popularity in particular within the last few decades. It also presents a brief classification of playwrights employed science in their works, and does analysis for major works that contributed much not only in the development and popularity of science drama, but also in the drastic change they have brought to this genre.  Actually, from Marlowe to now, scientists and science have held a fascination for writers and audience on equal terms. In our genetic, atomic and tech-savvy climate, drama contains science of any kind will head directly to spotlight. The pivotal year of 1998, when Copenhagen was first premiered, has led to unprecedented wave of science plays. Science has become the vogue and science play has gone beyond using science as a sort of ornament to integrate it into the fabric of drama. Everything from Newton's Principia to Greene's books on String Theory has passed across the stage.  Consequently, this wave of science plays has not only softened the earth for a permanent shift in our perception of science as a fundamental part of our culture and a legitimate and compelling subject for theatre, but also has brought the vision of ‘‘a third culture’’ into reality.

  20. Reference Assessment

    Science.gov (United States)

    Bivens-Tatum, Wayne

    2006-01-01

    This article presents interesting articles that explore several different areas of reference assessment, including practical case studies and theoretical articles that address a range of issues such as librarian behavior, patron satisfaction, virtual reference, or evaluation design. They include: (1) "Evaluating the Quality of a Chat Service"…

  1. Open source hardware solutions for low-cost, do-it-yourself environmental monitoring, citizen science, and STEM education

    Science.gov (United States)

    Hicks, S. D.; Aufdenkampe, A. K.; Horsburgh, J. S.; Arscott, D. B.; Muenz, T.; Bressler, D. W.

    2016-12-01

    The explosion in DIY open-source hardware and software has resulted in the development of affordable and accessible technologies, like drones and weather stations, that can greatly assist the general public in monitoring environmental health and its degradation. It is widely recognized that education and support of audiences in pursuit of STEM literacy and the application of emerging technologies is a challenge for the future of citizen science and for preparing high school graduates to be actively engaged in environmental stewardship. It is also clear that detecting environmental change/degradation over time and space will be greatly enhanced with expanded use of networked, remote monitoring technologies by watershed organizations and citizen scientists if data collection and reporting are properly carried out and curated. However, there are few focused efforts to link citizen scientists and school programs with these emerging tools. We have started a multi-year program to develop hardware and teaching materials for training students and citizen scientists about the use of open source hardware in environmental monitoring. Scientists and educators around the world have started building their own dataloggers and devices using a variety of boards based on open source electronics. This new hardware is now providing researchers with an inexpensive alternative to commercial data logging and transmission hardware. We will present a variety of hardware solutions using the Arduino-compatible EnviroDIY Mayfly board (http://envirodiy.org/mayfly) that can be used to build and deploy a rugged environmental monitoring station using a wide variety of sensors and options, giving the users a fully customizable device for making measurements almost anywhere. A database and visualization system is being developed that will allow the users to view and manage the data their devices are collecting. We will also present our plan for developing curricula and leading workshops to various

  2. Reference-quality genome sequence of Aegilops tauschii, the source of wheat D genome, shows that recombination shapes genome structure and evolution

    Science.gov (United States)

    Aegilops tauschii is the diploid progenitor of the D genome of hexaploid wheat and an important genetic resource for wheat. A reference-quality sequence for the Ae. tauschii genome was produced with a combination of ordered-clone sequencing, whole-genome shotgun sequencing, and BioNano optical geno...

  3. science

    International Development Research Centre (IDRC) Digital Library (Canada)

    David Spurgeon

    Give us the tools: science and technology for development. Ottawa, ...... altered technical rela- tionships among the factors used in the process of production, and the en- .... to ourselves only the rights of audit and periodic substantive review." If a ...... and destroying scarce water reserves, recreational areas and a generally.

  4. Recent references

    International Nuclear Information System (INIS)

    Ramavataram, S.

    1991-01-01

    In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Any reader who finds errors in the keyword descriptions is urged to report them to the National Nuclear Data Center so that the master NSR file can be corrected. In 1966, the first collection of Recent References was published as a separate issue of Nuclear Data Sheets. Every four months since 1970, a similar indexed bibliography to new nuclear experiments has been prepared from additions to the NSR file and published. Beginning in 1978, Recent References was cumulated annually, with the third issue completely superseding the two issues previously published during a given year. Due to publication policy changes, cumulation of Recent Reference was discontinued in 1986. The volume and issue number of all the cumulative issues published to date are given. NNDC will continue to respond to individual requests for special bibliographies on nuclear physics topics, in addition to those easily obtained from Recent References. If the required information is available from the keyword string, a reference list can be prepared automatically from the computer files. This service can be provided on request, in exchange for the timely communication of new nuclear physics results (e.g., preprints). A current copy of the NSR file may also be obtained in a standard format on magnetic tape from NNDC. Requests for special searches of the NSR file may also be directed to the National Nuclear Data Center

  5. Utilizing Public Access Data and Open Source Statistical Programs to Teach Climate Science to Interdisciplinary Undergraduate Students

    Science.gov (United States)

    Collins, L.

    2014-12-01

    Students in the Environmental Studies major at the University of Southern California fulfill their curriculum requirements by taking a broad range of courses in the social and natural sciences. Climate change is often taught in 1-2 lectures in these courses with limited examination of this complex topic. Several upper division elective courses focus on the science, policy, and social impacts of climate change. In an upper division course focused on the scientific tools used to determine paleoclimate and predict future climate, I have developed a project where students download, manipulate, and analyze data from the National Climatic Data Center. Students are required to download 100 or more years of daily temperature records and use the statistical program R to analyze that data, calculating daily, monthly, and yearly temperature averages along with changes in the number of extreme hot or cold days (≥90˚F and ≤30˚F, respectively). In parallel, they examine population growth, city expansion, and changes in transportation looking for correlations between the social data and trends observed in the temperature data. Students examine trends over time to determine correlations to urban heat island effect. This project exposes students to "real" data, giving them the tools necessary to critically analyze scientific studies without being experts in the field. Utilizing the existing, public, online databases provides almost unlimited, free data. Open source statistical programs provide a cost-free platform for examining the data although some in-class time is required to help students navigate initial data importation and analysis. Results presented will highlight data compiled over three years of course projects.

  6. Evaluation of the Retrieval of Nuclear Science Document References Using the Universal Decimal Classification as the Indexing Language for a Computer-Based System

    Science.gov (United States)

    Atherton, Pauline; And Others

    A single issue of Nuclear Science Abstracts, containing about 2,300 abstracts, was indexed by Universal Decimal Classification (UDC) using the Special Subject Edition of UDC for Nuclear Science and Technology. The descriptive cataloging and UDC-indexing records formed a computer-stored data base. A systematic random sample of 500 additional…

  7. Ghana Science Abstracts

    International Nuclear Information System (INIS)

    Entsua-Mensah, C.

    2004-01-01

    This issue of the Ghana Science Abstracts combines in one publication all the country's bibliographic output in science and technology. The objective is to provide a quick reference source to facilitate the work of information professionals, research scientists, lecturers and policy makers. It is meant to give users an idea of the depth and scope and results of the studies and projects carried out. The scope and coverage comprise research outputs, conference proceedings and periodical articles published in Ghana. It does not capture those that were published outside Ghana. Abstracts reported have been grouped under the following subject areas: Agriculture, Biochemistry, Biodiversity conservation, biological sciences, biotechnology, chemistry, dentistry, engineering, environmental management, forestry, information management, mathematics, medicine, physics, nuclear science, pharmacy, renewable energy and science education

  8. Case Study for the ARRA-funded Ground Source Heat Pump Demonstration at Denver Museum of Nature & Science

    Energy Technology Data Exchange (ETDEWEB)

    Im, Piljae [ORNL; Liu, Xiaobing [ORNL

    2016-09-01

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects were competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This report highlights the findings of a case study of one such GSHP demonstration projects that uses a recycled water heat pump (RWHP) system installed at the Denver Museum of Nature & Science in Denver, Colorado. The RWHP system uses recycled water from the city’s water system as the heat sink and source for a modular water-to-water heat pump (WWHP). This case study was conducted based on the available measured performance data from December 2014 through August 2015, utility bills of the building in 2014 and 2015, construction drawings, maintenance records, personal communications, and construction costs. The annual energy consumption of the RWHP system was calculated based on the available measured data and other related information. It was compared with the performance of a baseline scenario— a conventional VAV system using a water-cooled chiller and a natural gas fired boiler, both of which have the minimum energy efficiencies allowed by ASHRAE 90.1-2010. The comparison was made to determine energy savings, operating cost savings, and CO2 emission reductions achieved by the RWHP system. A cost analysis was performed to evaluate the simple payback of the RWHP system. Summarized below are the results of the performance analysis, the learned lessons, and recommended improvement in the operation of the RWHP system.

  9. Handbook of reference electrodes

    CERN Document Server

    Inzelt, György; Scholz, Fritz

    2013-01-01

    Reference Electrodes are a crucial part of any electrochemical system, yet an up-to-date and comprehensive handbook is long overdue. Here, an experienced team of electrochemists provides an in-depth source of information and data for the proper choice and construction of reference electrodes. This includes all kinds of applications such as aqueous and non-aqueous solutions, ionic liquids, glass melts, solid electrolyte systems, and membrane electrodes. Advanced technologies such as miniaturized, conducting-polymer-based, screen-printed or disposable reference electrodes are also covered. Essen

  10. R quick syntax reference

    CERN Document Server

    Tollefson, Margot

    2014-01-01

    The R Quick Syntax Reference is a handy reference book detailing the intricacies of the R language. Not only is R a free, open-source tool, R is powerful, flexible, and has state of the art statistical techniques available. With the many details which must be correct when using any language, however, the R Quick Syntax Reference makes using R easier.Starting with the basic structure of R, the book takes you on a journey through the terminology used in R and the syntax required to make R work. You will find looking up the correct form for an expression quick and easy. With a copy of the R Quick

  11. A multi-level differential item functioning analysis of trends in international mathematics and science study: Potential sources of gender and minority difference among U.S. eighth graders' science achievement

    Science.gov (United States)

    Qian, Xiaoyu

    Science is an area where a large achievement gap has been observed between White and minority, and between male and female students. The science minority gap has continued as indicated by the National Assessment of Educational Progress and the Trends in International Mathematics and Science Studies (TIMSS). TIMSS also shows a gender gap favoring males emerging at the eighth grade. Both gaps continue to be wider in the number of doctoral degrees and full professorships awarded (NSF, 2008). The current study investigated both minority and gender achievement gaps in science utilizing a multi-level differential item functioning (DIF) methodology (Kamata, 2001) within fully Bayesian framework. All dichotomously coded items from TIMSS 2007 science assessment at eighth grade were analyzed. Both gender DIF and minority DIF were studied. Multi-level models were employed to identify DIF items and sources of DIF at both student and teacher levels. The study found that several student variables were potential sources of achievement gaps. It was also found that gender DIF favoring male students was more noticeable in the content areas of physics and earth science than biology and chemistry. In terms of item type, the majority of these gender DIF items were multiple choice than constructed response items. Female students also performed less well on items requiring visual-spatial ability. Minority students performed significantly worse on physics and earth science items as well. A higher percentage of minority DIF items in earth science and biology were constructed response than multiple choice items, indicating that literacy may be the cause of minority DIF. Three-level model results suggested that some teacher variables may be the cause of DIF variations from teacher to teacher. It is essential for both middle school science teachers and science educators to find instructional methods that work more effectively to improve science achievement of both female and minority students

  12. Text-Based Argumentation with Multiple Sources: A Descriptive Study of Opportunity to Learn in Secondary English Language Arts, History, and Science

    Science.gov (United States)

    Litman, Cindy; Marple, Stacy; Greenleaf, Cynthia; Charney-Sirott, Irisa; Bolz, Michael J.; Richardson, Lisa K.; Hall, Allison H.; George, MariAnne; Goldman, Susan R.

    2017-01-01

    This study presents a descriptive analysis of 71 videotaped lessons taught by 34 highly regarded secondary English language arts, history, and science teachers, collected to inform an intervention focused on evidence-based argumentation from multiple text sources. Studying the practices of highly regarded teachers is valuable for identifying…

  13. The Difficulty of Differentiating Expertise and the Functions of Expert Sources and the Necessity of Studying Science Education in the Media

    Science.gov (United States)

    Allgaier, Joachim

    2011-01-01

    I start by introducing some ideas from the field of science and technology studies that concern the difficulty of differentiating experts and laypeople. Based on this description I react to Albaek's comment and further explain the approach taken in my study. The results of the study indicate that the function of different types of sources can vary…

  14. Sources of Inspiration: The role of significant persons in young people's choice of science in higher education

    Science.gov (United States)

    Sjaastad, Jørgen

    2012-07-01

    The objectives of this article were to investigate to which extent and in what ways persons influence students' choice of science, technology, engineering, and mathematics (STEM) in tertiary education, and to assess the suitability of an analytical framework for describing this influence. In total, 5,007 Norwegian STEM students completed a questionnaire including multiple-choice as well as open-ended questions about sources of inspiration for their educational choice. Using the conceptualisation of significant persons suggested by Woelfel and Haller, the respondents' descriptions of parents and teachers are presented in order to elaborate on the different ways these significant persons influence a STEM-related educational choice. Parents engaged in STEM themselves are models, making the choice of STEM familiar, and they help youngsters define themselves through conversation and support, thus being definers. Teachers are models by displaying how STEM might bring fulfilment in someone's life and by giving pupils a positive experience with the subjects. They help young people discover their STEM abilities, thus being definers. Celebrities are reported to have minor influence on STEM-related educational choices. Both qualitative and quantitative analyses indicate that interpersonal relationships are key factors in order to inspire and motivate a choice of STEM education. Implications for recruitment issues and for research on interpersonal influence are discussed. It is suggested that initiatives to increase recruitment to STEM might be aimed at parents and other persons in interpersonal relationships with youth as a target group.

  15. "The only disinterested source of funds": Embedded science, lobbying, and the NSF’s patronage of social science in the 1980s

    NARCIS (Netherlands)

    Scheiding, T.; Mata, T.

    2010-01-01

    Research in the social sciences received generous patronage in the late 1960s and early 1970s when social problems were particularly severe and when social sciences were seen as creating social and economic benefits. That generosity ended in the late 1970s. This essay explores the various ways by

  16. First experience with single-source dual-energy computed tomography in six patients with acute arthralgia: a feasibility experiment using joint aspiration as a reference

    Energy Technology Data Exchange (ETDEWEB)

    Diekhoff, Torsten; Kiefer, Tobias; Hamm, Bernd; Hermann, Kay-Geert A. [Charite - Universitaetsmedizin Berlin Campus Mitte, Humboldt-Universitaet zu Berlin, Freie Universitaet Berlin, Department of Radiology, Berlin (Germany); Ziegeler, Katharina; Feist, Eugen [Charite - Universitaetsmedizin Berlin Campus Mitte, Humboldt-Universitaet zu Berlin, Freie Universitaet Berlin, Department of Rheumatology and Clinical Immunology, Berlin (Germany); Mews, Juergen [Toshiba Medical Systems Europe, BV, Zoetermeer (Netherlands)

    2015-11-15

    Dual-energy computed tomography (DECT) is an emerging imaging technique for examining patients with suspected gout. Single-source dual-energy CT (S-DECT) is a new way of obtaining DECT information on conventional CT scanners rather than using special dual-source CT systems. We tested the feasibility of S-DECT (320-row CT; Aquilion ONE, Toshiba Medical Systems, Otawara, Japan) in 6 patients (5 men, 1 woman; mean age 61.3, range 48 to 69 years) with acute arthralgia and suspected gout, and compared the S-DECT findings with the results of joint aspiration. Three patients had a diagnosis of gouty arthritis with negatively birefringent crystals in synovial fluid, in addition to gouty tophi in S-DECT. Three patients had no detectable crystals by polarization microscopy and no tophi on DECT. Their final diagnoses were rheumatoid arthritis, activated osteoarthritis, and septic arthritis in one case each. This initial experience suggests that S-DECT might be a valuable alternative to dual-source CT. Hence, more patients may benefit from its additional diagnostic abilities in the future. (orig.)

  17. First experience with single-source dual-energy computed tomography in six patients with acute arthralgia: a feasibility experiment using joint aspiration as a reference

    International Nuclear Information System (INIS)

    Diekhoff, Torsten; Kiefer, Tobias; Hamm, Bernd; Hermann, Kay-Geert A.; Ziegeler, Katharina; Feist, Eugen; Mews, Juergen

    2015-01-01

    Dual-energy computed tomography (DECT) is an emerging imaging technique for examining patients with suspected gout. Single-source dual-energy CT (S-DECT) is a new way of obtaining DECT information on conventional CT scanners rather than using special dual-source CT systems. We tested the feasibility of S-DECT (320-row CT; Aquilion ONE, Toshiba Medical Systems, Otawara, Japan) in 6 patients (5 men, 1 woman; mean age 61.3, range 48 to 69 years) with acute arthralgia and suspected gout, and compared the S-DECT findings with the results of joint aspiration. Three patients had a diagnosis of gouty arthritis with negatively birefringent crystals in synovial fluid, in addition to gouty tophi in S-DECT. Three patients had no detectable crystals by polarization microscopy and no tophi on DECT. Their final diagnoses were rheumatoid arthritis, activated osteoarthritis, and septic arthritis in one case each. This initial experience suggests that S-DECT might be a valuable alternative to dual-source CT. Hence, more patients may benefit from its additional diagnostic abilities in the future. (orig.)

  18. Electrical engineer's reference book

    CERN Document Server

    Jones, G R

    2013-01-01

    A long established reference book: radical revision for the fifteenth edition includes complete rearrangement to take in chapters on new topics and regroup the subjects covered for easy access to information.The Electrical Engineer's Reference Book, first published in 1945, maintains its original aims: to reflect the state of the art in electrical science and technology and cater for the needs of practising engineers. Most chapters have been revised and many augmented so as to deal properly with both fundamental developments and new technology and applications that have come to the fore since

  19. Reference problems

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.

    CURRENT SCIENCE, VOL. 80, NO. 10, 25 MAY 2001 1249 tion are so high and that the gullible public will rush like lemmings to cha r- latans, often at considerable costs in terms of money, time and energy, only indicates that traditional ed ucation...

  20. Low-level radioactive waste from commercial nuclear reactors. Volume 3. Bibliographic abstracts of significant source references. Part 2. Bibliography for treatment, storage, disposal and transportation regulatory constraints

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Rodgers, B.R.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 3 of this series is a collection of abstracts of most of the reference documents used for this study. Because of the large volume of literature, the abstracts have been printed in two separate parts. Federal, state, and local regulations affect the decision process for selecting technology applications. Regulations may favor a particular technology and may prevent application of others. Volume 3, part 2 presents abstracts of the regulatory constraint documents that relate to all phases of LLRW management (e.g., treatment, packaging, storage, transportation, and disposal).

  1. Building a multi-scaled geospatial temporal ecology database from disparate data sources: Fostering open science through data reuse

    Science.gov (United States)

    Soranno, Patricia A.; Bissell, E.G.; Cheruvelil, Kendra S.; Christel, Samuel T.; Collins, Sarah M.; Fergus, C. Emi; Filstrup, Christopher T.; Lapierre, Jean-Francois; Lotting, Noah R.; Oliver, Samantha K.; Scott, Caren E.; Smith, Nicole J.; Stopyak, Scott; Yuan, Shuai; Bremigan, Mary Tate; Downing, John A.; Gries, Corinna; Henry, Emily N.; Skaff, Nick K.; Stanley, Emily H.; Stow, Craig A.; Tan, Pang-Ning; Wagner, Tyler; Webster, Katherine E.

    2015-01-01

    Although there are considerable site-based data for individual or groups of ecosystems, these datasets are widely scattered, have different data formats and conventions, and often have limited accessibility. At the broader scale, national datasets exist for a large number of geospatial features of land, water, and air that are needed to fully understand variation among these ecosystems. However, such datasets originate from different sources and have different spatial and temporal resolutions. By taking an open-science perspective and by combining site-based ecosystem datasets and national geospatial datasets, science gains the ability to ask important research questions related to grand environmental challenges that operate at broad scales. Documentation of such complicated database integration efforts, through peer-reviewed papers, is recommended to foster reproducibility and future use of the integrated database. Here, we describe the major steps, challenges, and considerations in building an integrated database of lake ecosystems, called LAGOS (LAke multi-scaled GeOSpatial and temporal database), that was developed at the sub-continental study extent of 17 US states (1,800,000 km2). LAGOS includes two modules: LAGOSGEO, with geospatial data on every lake with surface area larger than 4 ha in the study extent (~50,000 lakes), including climate, atmospheric deposition, land use/cover, hydrology, geology, and topography measured across a range of spatial and temporal extents; and LAGOSLIMNO, with lake water quality data compiled from ~100 individual datasets for a subset of lakes in the study extent (~10,000 lakes). Procedures for the integration of datasets included: creating a flexible database design; authoring and integrating metadata; documenting data provenance; quantifying spatial measures of geographic data; quality-controlling integrated and derived data; and extensively documenting the database. Our procedures make a large, complex, and integrated

  2. Building a multi-scaled geospatial temporal ecology database from disparate data sources: fostering open science and data reuse.

    Science.gov (United States)

    Soranno, Patricia A; Bissell, Edward G; Cheruvelil, Kendra S; Christel, Samuel T; Collins, Sarah M; Fergus, C Emi; Filstrup, Christopher T; Lapierre, Jean-Francois; Lottig, Noah R; Oliver, Samantha K; Scott, Caren E; Smith, Nicole J; Stopyak, Scott; Yuan, Shuai; Bremigan, Mary Tate; Downing, John A; Gries, Corinna; Henry, Emily N; Skaff, Nick K; Stanley, Emily H; Stow, Craig A; Tan, Pang-Ning; Wagner, Tyler; Webster, Katherine E

    2015-01-01

    Although there are considerable site-based data for individual or groups of ecosystems, these datasets are widely scattered, have different data formats and conventions, and often have limited accessibility. At the broader scale, national datasets exist for a large number of geospatial features of land, water, and air that are needed to fully understand variation among these ecosystems. However, such datasets originate from different sources and have different spatial and temporal resolutions. By taking an open-science perspective and by combining site-based ecosystem datasets and national geospatial datasets, science gains the ability to ask important research questions related to grand environmental challenges that operate at broad scales. Documentation of such complicated database integration efforts, through peer-reviewed papers, is recommended to foster reproducibility and future use of the integrated database. Here, we describe the major steps, challenges, and considerations in building an integrated database of lake ecosystems, called LAGOS (LAke multi-scaled GeOSpatial and temporal database), that was developed at the sub-continental study extent of 17 US states (1,800,000 km(2)). LAGOS includes two modules: LAGOSGEO, with geospatial data on every lake with surface area larger than 4 ha in the study extent (~50,000 lakes), including climate, atmospheric deposition, land use/cover, hydrology, geology, and topography measured across a range of spatial and temporal extents; and LAGOSLIMNO, with lake water quality data compiled from ~100 individual datasets for a subset of lakes in the study extent (~10,000 lakes). Procedures for the integration of datasets included: creating a flexible database design; authoring and integrating metadata; documenting data provenance; quantifying spatial measures of geographic data; quality-controlling integrated and derived data; and extensively documenting the database. Our procedures make a large, complex, and integrated

  3. Computer science I essentials

    CERN Document Server

    Raus, Randall

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Computer Science I includes fundamental computer concepts, number representations, Boolean algebra, switching circuits, and computer architecture.

  4. The reception of Machiavelli and the neo-machiavellian in Political Science, with special reference to the Uruguayan case (1957-1985

    Directory of Open Access Journals (Sweden)

    José Miguel Busquets

    2015-10-01

    Full Text Available The aim of this paper is to analyze the reception of Machiavelli and the neo machiavellian (Pareto, Mosca, Michels, in the main Political Science paradigms, as well as in the teaching of this discipline at the University of the Republic, from 1957, when the first Political Science chair was created at the Law School, till 1985, when Uruguay returned to democracy, after a twelve-year period of civil-military dictatorship. For this purpose, first, this article will review the itinerary of international Political Science, presenting the different stages that this discipline has gone through. Then, it will make an approach to the reception of Machiavelli and the neo-machiavellian in three political scientists of great significance: Harold Laswell, Robert Dahl and Giovanni Sartori. Second, the paper will examine the reception of the works of the Florentine author and the elitist theorists in three Political Science chairs that were conducted during the indicated period by Alberto Ramón Real, Carlos Real de Azúa and Jacques Ginesta. Finally, there will be a reflection on the different emphases that were made in the teaching of Political Science at that time, particularly following the intervention of the University after the 1973 coup d’État.

  5. Islam and Science

    Science.gov (United States)

    Salam, Abdus

    The following sections are included: * The Holy Quran and Science * Modem Science, A Greco- Islamic Legacy * The Decline of Sciences in Islam * The Limitations of Science * Faith and Science * The Present Picture of Sciences in the Islamic Countries * Renaissance of Sciences in Islam * Steps Needed for Building up Sciences in the Islamic Countries * Science Education * Science Foundations in Islam * Technology in Our Countries * Concluding Remarks * REFERENCES

  6. A JEM-X catalog of X-ray sources

    DEFF Research Database (Denmark)

    Westergaard, Niels Jørgen Stenfeldt; Chenevez, Jerome; Lund, Niels

    2007-01-01

    The JEM-X catalog of X-ray sources presented here is based on detections in individual science windows with a sensitivity limit of about 10 mCrab (5-15 keV). It contains 127 sources and only those that can be identified from the existing reference catalog. The input data are taken from the, up...

  7. Python essential reference

    CERN Document Server

    Beazley, David M

    2009-01-01

    Python Essential Reference is the definitive reference guide to the Python programming language — the one authoritative handbook that reliably untangles and explains both the core Python language and the most essential parts of the Python library. Designed for the professional programmer, the book is concise, to the point, and highly accessible. It also includes detailed information on the Python library and many advanced subjects that is not available in either the official Python documentation or any other single reference source. Thoroughly updated to reflect the significant new programming language features and library modules that have been introduced in Python 2.6 and Python 3, the fourth edition of Python Essential Reference is the definitive guide for programmers who need to modernize existing Python code or who are planning an eventual migration to Python 3. Programmers starting a new Python project will find detailed coverage of contemporary Python programming idioms.

  8. The Rationale for a Teaching Innovation about the Interrelationship between Science and Technology

    Science.gov (United States)

    Hadjilouca, R.; Constantinou, C. P.; Papadouris, N.

    2011-01-01

    This paper refers to the development of a teaching innovation for the nature of science (NOS), for students aged 11-15, which specifically focuses on the interrelationship between science and technology. The development of the teaching and learning materials relied on inputs from three sources: the history and philosophy of science and technology,…

  9. Heavy-ion injector based on an electron cyclotron ion source for the superconducting linear accelerator of the Rare Isotope Science Project.

    Science.gov (United States)

    Hong, In-Seok; Kim, Yong-Hwan; Choi, Bong-Hyuk; Choi, Suk-Jin; Park, Bum-Sik; Jin, Hyun-Chang; Kim, Hye-Jin; Heo, Jeong-Il; Kim, Deok-Min; Jang, Ji-Ho

    2016-02-01

    The injector for the main driver linear accelerator of the Rare Isotope Science Project in Korea, has been developed to allow heavy ions up to uranium to be delivered to the inflight fragmentation system. The critical components of the injector are the superconducting electron cyclotron resonance (ECR) ion sources, the radio frequency quadrupole (RFQ), and matching systems for low and medium energy beams. We have built superconducting magnets for the ECR ion source, and a prototype with one segment of the RFQ structure, with the aim of developing a design that can satisfy our specifications, demonstrate stable operation, and prove results to compare the design simulation.

  10. Gravity in Gravity’s Rainbow – Force, Fictitious Force, and Frame of Reference; or: The Science and Poetry of Sloth

    Directory of Open Access Journals (Sweden)

    Nina Engelhardt

    2014-09-01

    Full Text Available Gravity is a prominent physical concept in 'Gravity's Rainbow', as already announced by the novel's title. If the second part of the title – the poetic image of the rainbow – is bound up with mathematical formulas and the parabolic path of the Rocket, so conversely, this paper argues, Pynchon's novel introduces a relation between gravity and fiction. The paper explores 'Gravity's Rainbow''s use of the changing historical understandings of gravitation from the seventeenth to the twentieth centuries by examining the novel's illustration of Newton and Leibniz's opposed concepts as well as its references to gravity as understood in Einstein's theory of relativity. When tracing the notions of gravity as force, fictitious force, and frame of reference, a particular focus lies on the relation of physical imagery to ethical questions and on the way 'Gravity's Rainbow' provides a physico-ethical explanation of Slothrop's disappearance from the novel.

  11. USGS42 and USGS43: Human-hair stable hydrogen and oxygen isotopic reference materials and analytical methods for forensic science and implications for published measurement results

    Science.gov (United States)

    Coplen, T.B.; Qi, H.

    2012-01-01

    Because there are no internationally distributed stable hydrogen and oxygen isotopic reference materials of human hair, the U.S. Geological Survey (USGS) has prepared two such materials, USGS42 and USGS43. These reference materials span values commonly encountered in human hair stable isotope analysis and are isotopically homogeneous at sample sizes larger than 0.2 mg. USGS42 and USGS43 human-hair isotopic reference materials are intended for calibration of δ(2)H and δ(18)O measurements of unknown human hair by quantifying (1) drift with time, (2) mass-dependent isotopic fractionation, and (3) isotope-ratio-scale contraction. While they are intended for measurements of the stable isotopes of hydrogen and oxygen, they also are suitable for measurements of the stable isotopes of carbon, nitrogen, and sulfur in human and mammalian hair. Preliminary isotopic compositions of the non-exchangeable fractions of these materials are USGS42(Tibetan hair)δ(2)H(VSMOW-SLAP) = -78.5 ± 2.3‰ (n = 62) and δ(18)O(VSMOW-SLAP) = +8.56 ± 0.10‰ (n = 18) USGS42(Indian hair)δ(2)H(VSMOW-SLAP) = -50.3 ± 2.8‰ (n = 64) and δ(18)O(VSMOW-SLAP) = +14.11 ± 0.10‰ (n = 18). Using recommended analytical protocols presented herein for δ(2)H(VSMOW-SLAP) and δ(18)O(VSMOW-SLAP) measurements, the least squares fit regression of 11 human hair reference materials is δ(2)H(VSMOW-SLAP) = 6.085δ(2)O(VSMOW-SLAP) - 136.0‰ with an R-square value of 0.95. The δ(2)H difference between the calibrated results of human hair in this investigation and a commonly accepted human-hair relationship is a remarkable 34‰. It is critical that readers pay attention to the δ(2)H(VSMOW-SLAP) and δ(18)O(VSMOW-SLAP) of isotopic reference materials in publications, and they need to adjust the δ(2)H(VSMOW-SLAP) and δ(18)O(VSMOW-SLAP) measurement results of human hair in previous publications, as needed, to ensure all results on are on the same scales.

  12. Learning science as a potential new source of understanding and improvement for continuing education and continuing professional development.

    Science.gov (United States)

    Van Hoof, Thomas J; Doyle, Terrence J

    2018-01-15

    Learning science is an emerging interdisciplinary field that offers educators key insights about what happens in the brain when learning occurs. In addition to explanations about the learning process, which includes memory and involves different parts of the brain, learning science offers effective strategies to inform the planning and implementation of activities and programs in continuing education and continuing professional development. This article provides a brief description of learning, including the three key steps of encoding, consolidation and retrieval. The article also introduces four major learning-science strategies, known as distributed learning, retrieval practice, interleaving, and elaboration, which share the importance of considerable practice. Finally, the article describes how learning science aligns with the general findings from the most recent synthesis of systematic reviews about the effectiveness of continuing medical education.

  13. A revision in hydrogen isotopic composition of USGS42 and USGS43 human-hair stable isotopic reference materials for forensic science

    Science.gov (United States)

    Coplen, Tyler B.; Qi, Haiping

    2016-01-01

    The hydrogen isotopic composition (δ2HVSMOW-SLAP) of USGS42 and USGS43 human hair stable isotopic reference materials, normalized to the VSMOW (Vienna-Standard Mean Ocean Water)–SLAP (Standard Light Antarctic Precipitation) scale, was originally determined with a high temperature conversion technique using an elemental analyzer (TC/EA) with a glassy carbon tube and glassy carbon filling and analysis by isotope-ratio mass spectrometer (IRMS). However, the TC/EA IRMS method can produce inaccurate δ2HVSMOW-SLAPresults when analyzing nitrogen-bearing organic substances owing to the formation of hydrogen cyanide (HCN), leading to non-quantitative conversion of a sample into molecular hydrogen (H2) for IRMS analysis. A single-oven, chromium-filled, elemental analyzer (Cr-EA) coupled to an IRMS substantially improves the measurement quality and reliability of hydrogen isotopic analysis of hydrogen- and nitrogen-bearing organic material because hot chromium scavenges all reactive elements except hydrogen. USGS42 and USGS43 human hair isotopic reference materials have been analyzed with the Cr-EA IRMS method, and the δ2HVSMOW-SLAP values of their non-exchangeable hydrogen fractions have been revised:where mUr = 0.001 = ‰. On average, these revised δ2HVSMOW-SLAP values are 5.7 mUr more positive than those previously measured. It is critical that readers pay attention to the δ2HVSMOW-SLAP of isotopic reference materials in publications as they may need to adjust the δ2HVSMOW–SLAP measurement results of human hair in previous publications to ensure all results are on the same isotope-delta scale.

  14. NUnit Pocket Reference

    CERN Document Server

    Hamilton, Bill

    2009-01-01

    The open source NUnit framework is an excellent way to test .NET code as it is written, saving hundreds of QA hours and headaches. Unfortunately, some of those hours saved can be wasted trying to master this popular but under-documented framework. Proof that good things come in small packages, the NUnit Pocket Reference is everything you need to get NUnit up and working for you. It's the only book you'll need on this popular and practical new open source framework.

  15. Poppy Project: Open-Source Fabrication of 3D Printed Humanoid Robot for Science, Education and Art

    OpenAIRE

    Lapeyre , Matthieu; Rouanet , Pierre; Grizou , Jonathan; Nguyen , Steve; Depraetre , Fabien; Le Falher , Alexandre; Oudeyer , Pierre-Yves

    2014-01-01

    International audience; Poppyisthefirstcompleteopen-source3Dprintedhumanoid platform. Robust and accessible, it allows scientists, students, geeks, en- gineers or artists to explore fast and easily the fabrication and program- ming of various robotic morphologies. Both hardware and software are open-source, and a web platform allows interdisciplinary contributions, sharing and collaborations.

  16. Comparison of Salivary pH in Diabetic Patients Referring to Diabetes Center of Shahid Sadoughi University of Medical Sciences with Non-Diabetic Controls

    Directory of Open Access Journals (Sweden)

    F Owlia

    2012-05-01

    Full Text Available Introduction: Diabetes mellitus has extensive oral consequences which could be referred to changes of saliva properties. The purpose of this study was to compare the pH of un-stimulated whole saliva between diabetic patients that referred to diabetes center of Yazd Shahid Sadoughi university and non- diabetic persons. Methods: In this Case- control study, the population consisted of 60 persons in 2 groups: Thirty diabetic patients(type 2 and 30 non-diabetic persons. Two patients of case group were excluded from study due to inconsistency of their salivary pH and pH paper. Sampling from saliva was performed after 2 hours of abstinence from eating and smoking. Then pH of samples was measured by the pH paper that was scored from 5.5 to 8. After that blood sample was taken for measuring FBS. Data from 2 groups was analyzed using t-test, Mann-Whitney test and Spearman correlation by SPSS software(ver. 12. Results: Mean pH in case and control groups was 6.11 ±0.57 and 6.66±0.64, respectively. The results showed that pH of un-stimulated whole saliva in diabetic patients was significantly lower than control group(P=0.001. Conclusion: pH of un-stimulated whole saliva in diabetic patients was lower than non-diabetic persons and pH of un-stimulated whole saliva had a reverse relationship with FBS(P=0.031.

  17. Guide to Sources: American History, Anthropology, Folklore, Business Administration, Education, English, Food Science, French, German, Music, Philosophy, Political Science, Psychology, and Sociology.

    Science.gov (United States)

    Maine Univ., Orono. Raymond H. Fogler Library.

    This group of 13 library guides, designed to introduce the student to some of the bibliographical tools available in various subject areas at Fogler Library, is not intended to be a complete listing, but rather a selective introduction to the many sources of information available to the beginning researcher. Information is provided on the use of…

  18. Buddhism: A Brief Guide to Reference Sources.

    Science.gov (United States)

    Drost, Jerry

    The annotated bibliography lists 48 articles, atlases, dictionaries, bibliographies, and general and subject indexes on Buddhism. The bibliography is intended to provide college students with an introduction to the more complex literature of Buddhism and to stimulate further research and study. Topics include the history of Buddhism; the practice…

  19. SU-F-T-16: Experimental Determination of Ionization Chamber Correction Factors for In-Phantom Measurements of Reference Air Kerma Rate and Absorbed Water Dose Rate of Brachytherapy 192Ir Source

    International Nuclear Information System (INIS)

    Chan, M; Lee, V; Wong, M; Leung, R; Law, G; Lee, K; Cheung, S; Tung, S

    2016-01-01

    Purpose: Following the method of in-phantom measurements of reference air kerma rate (Ka) at 100cm and absorbed water dose rate (Dw1) at 1cm of high-dose-rate 192Ir brachytherapy source using 60Co absorbed-dose-to-water calibrated (ND,w,60Co) ionization chamber (IC), we experimentally determined the in-phantom correction factors (kglob) of the PTW30013 (PTW, Freiburg, Germany) IC by comparing the Monte Carlo (MC)-calculated kglob of the other PTW30016 IC. Methods: The Dw1 formalism of in-phantom measurement is: M*ND,w,60Co*(kglob)Dw1, where M is the collected charges, and (kglob)Dw1 the in-phantom Dw1 correction factor. Similarly, Ka is determined by M*ND,w,60Co*(kglob)ka, where (kglob)ka the in-phantom Ka correction factor. Two thimble ICs PTW30013 and another PTW30016 having a ND,w,60Co from the German primary standard laboratory (PTB) were simultaneously exposed to the microselectron 192Ir v2 source at 8cm in a PMMA phantom. A reference well chamber (PTW33004) with a PTB transfer Ka calibration Nka was used for comparing the in-phantom measurements to derive the experimental (kglob)ka factors. We determined the experimental (kglob)Dw1 of the PTW30013 by comparing the PTW30016 measurements with MC-calculated (kglob)Dw1. Results: Ka results of the PTW30016 based on ND,w,60Co and MC-calculated (kglob)ka differ from the well chamber results based on Nka by 1.6% and from the manufacturer by 1.0%. Experimental (kglob)ka factors for the PTW30016 and two other PTW30013 are 0.00683, 0.00681 and 0.00679, and vary <0.5% with 1mm source positioning uncertainty. Experimental (kglob)Dw1 of the PTW30013 ICs are 75.3 and 75.6, and differ by 1.6% from the conversion by dose rate constant from the AAPM report 229. Conclusion: The 1.7% difference between MC and experimental (kglob)ka for the PTW30016 IC is within the PTB 2.5% expanded uncertainty in Ka calibration standard. Using a single IC with ND,w,60Co to calibrate the brachytherapy source and dose output in external

  20. World Congress on Engineering and Computer Science 2014

    CERN Document Server

    Amouzegar, Mahyar; Ao, Sio-long

    2015-01-01

    This volume contains thirty-nine revised and extended research articles, written by prominent researchers participating in the World Congress on Engineering and Computer Science 2014, held in San Francisco, October 22-24 2014. Topics covered include engineering mathematics, electrical engineering, circuit design, communications systems, computer science, chemical engineering, systems engineering, and applications of engineering science in industry. This book describes some significant advances in engineering technologies, and also serves as an excellent source of reference for researchers and graduate students.

  1. Research at and Operation of the Materials Science Beamline (X-11) at the National Synchrotron Light Source. Final Report

    International Nuclear Information System (INIS)

    Sayers, Dale E.

    2003-01-01

    This is the final report for DOE DE-FG02-89ER45384. An overview of the operational history and status of beamline X-11A at the end of the contract period, and a brief review of the core science program at NCSU and the scientific results of X-11A since the last progress report is also presented

  2. The relationship between dental caries and body mass index and food habits in children referred to dentistry clinic of Tabriz university of medical sciences

    Directory of Open Access Journals (Sweden)

    javad Mohtadinia

    2011-03-01

    Full Text Available Regarding to the importance of food habits and the probable role of obesity in dental caries, this study was done to assess the relationship between teeth decay index in children and body mass index, and food habits in dentistry clinic of Tabriz university of medical sciences. Materials and Methods: In this cross-sectional analytic study 202 children aged 3-12 years old were selected randomly. For assessing dental caries, decayed, missed, and filled teeth index and for evaluating food habits, semi quantitative food frequency questionnaire were used. Data were analyzed using Correlation test and Regression analysis. Results: The overall mean of decayed, missed, and filled teeth index in the children of this study was 7.61±3.80. There were significant reverse correlations between this index and age (r = -0.176, and fruit consumption (r = -0.155 (P0.05. Considering the last regression model, age, mother job, and frequency of nuts consumption were significant predictors for decayed teeth number. Conclusion: The results of this study indicated that high fruit consumption was associated with less dental caries and among foods which were evaluated, consumption of nuts was significant predictor for decayed teeth number.

  3.  Evaluation of the reasons for the extraction among patients referred to the Oral Surgery Department,Faculty of Dentistry, Tehran University of Medical Sciences

    Directory of Open Access Journals (Sweden)

    Ramezanian M.

    2004-06-01

    Full Text Available Statement of Problem: Tooth extraction is always considered as the final treatment option in dentistry."nConsidering the numerous advances in dentistry, nowadays the preservation of the permanent teeth until old"nage is common. However, in most economically poor countries or those without security service insurance,"nthe high rate of extraction, particularly among restorable teeth, is regrettable."nPurpose: The aim of the present study was to determine the reasons for tooth extraction among patients"nreferred to the faculty of Dentistry, Tehran University of Medical Sciences in 2002."nMaterials and Methods: This descriptive and cross-sectional study was conducted on 320 patients. The"ninformation about patient's general knowledge, oral health status, tooth location and causes of extraction were"ncollected and recorded in a questionnaire. The data were submitted to statistical Chi-Square test."nResults: No statistically significant difference was found between two genders in their mentioned causes for"nextraction. The most prevalent reasons were as follows: Caries (50%, Periodontal diseases (16.6%. Absence"nof an acceptable occlusion, prosthetic problems, patient's request, etc... make up the remaining 33.4% of the"nreasons."nConclusion: According to this study, it is suggested to investigate extraction etiology at the society level and"nif similar results are obtained, necessary steps should be taken to prevent caries and periodontal problems as"nthe major mentioned causes for tooth extraction.

  4. Epidemiologic Study of Animal Bites and Rabies Referring to Rabies Prevention and Treatment Center of Jahrom University of Medical Sciences in 2011-2016

    Directory of Open Access Journals (Sweden)

    Tayebeh Rakhshani

    2017-09-01

    Full Text Available Background: The aim of this study was to describe the epidemiological characteristics of animal bite during 2011 -2016 years in Jahrom city. Methods: This cross-sectional study was performed using data from the Jahrom University of Medical Sciences. For analytical statistics, Chi-square test and multiple regression test were used. SPSS software version 21 was used for statistical analysis. Results: In total, 2010 people with an average age of 31.4 ±1.7 in the years 2011 to 2016 in the were biting. Of these, 429 were female (21.3% and 1581 were male (78.7%. The results multiple showed that there was a positive correlation between (animal bites; Beta = 0.05, age; Beta = 0.02, location of ulcer; Beta = 0.01 with animal bites positive and direct correlation with animal bites. Animal type variables (Beta = -0.06, primary measures (Beta = -0.03, gender (Beta = -0.03, nationality (Beta = -0.03, wound size (Beta = -0.02 and location (Beta = 0.05 had a negative correlation with animal bites. Conclusion: Most cases of biting have been related to dogs, pets and rural areas. Therefore, the vaccination of dogs and cats is essential by preventing dogs from being exposed to humans.

  5. Radiological Assessment for the Vance Road Facility Source Vault, Oak Ridge Institute for Science and Education, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Morton, J. R.

    2000-01-01

    From the 1950s, the Vance Road laboratories had been used for a broad range of nuclear medicine research involving numerous radionuclides. These radionuclides were stored in the a source vault located on the first floor of the facility. The Environmental Survey and Site Assessment Program (ESSAP) of ORISE performed a radiological assessment survey of the source vault after it had been remediated and in preparation for converting the area to office space

  6. Reference Design Project Book: NUSEL-Homestake

    OpenAIRE

    Haxton, W. C.

    2003-01-01

    This submission includes the overview, science timeline, reference design, WBS, and mine status sections of the Homestake collaboration's Reference Design Project Book. The Project Book describes the specific plan for converting the Homestake Gold Mine into a facility for physics, earth science, and engineering. The proposed developments on the 7400- and 4850-ft levels are presented, along with the plans for adapting Homestake's existing infrastructure for science. The plan differs substantia...

  7. The Relationship between Intake of Dairy Products and Polycystic Ovary Syndrome in Women Who Referred to Isfahan University of Medical Science Clinics in 2013.

    Science.gov (United States)

    Rajaeieh, Golnaz; Marasi, Mohamadreza; Shahshahan, Zahra; Hassanbeigi, Fatemmeh; Safavi, Seied Morteza

    2014-06-01

    Polycystic ovary syndrome (PCOS) is the most common endocrine disorder in reproductive women. Nearly 10% of young women in this period involved. Although factors such as Insulin Resistance, hyper insulinemia, obesity and dietary are suggested to be associated with PCOS, cause of PCOS is not completely understood. Dairy products (a key component of the usual diet) of participants can also affect the factors of this disease and may have beneficial effects on treatment of PCOS. However, research in this area is scarce. The purpose of this study was to evaluate the relationship between dairy products consumption and PCOS. This descriptive cross-sectional study of 400 women was conducted in Shahid Beheshti Hospital of Isfahan University of Medical Science, Iran. Dietary intake was evaluated by validated food frequency questionnaire. Other variables such as ovarian disease, inherited predisposition, age at menarche, physical activity and history of other diseases were evaluated using questionnaire. Data analysis was performed by a logistic regression test using SPSS software version 15 Predictive analytics software and solutions. There were a significant association between PCOS and ovarian disease (P medication (P = 0.001). Body mass index (BMI) was inversely associated with PCOS, but it was not significant (P = 0.068). There was a significant direct relationship between milk consumption and risk of PCOS after adjusting for confounding factors (P = 0.028). The findings of this study indicated that ovarian disease and medication use is directly linked to PCOS. Dairy consumption was not significantly correlated with PCOS. However, after adjustment for confounders, there was an direct relationship between milk consumption and risk of PCOS.

  8. Helicon plasma generator-assisted surface conversion ion source for the production of H(-) ion beams at the Los Alamos Neutron Science Center.

    Science.gov (United States)

    Tarvainen, O; Rouleau, G; Keller, R; Geros, E; Stelzer, J; Ferris, J

    2008-02-01

    The converter-type negative ion source currently employed at the Los Alamos Neutron Science Center (LANSCE) is based on cesium enhanced surface production of H(-) ion beams in a filament-driven discharge. In this kind of an ion source the extracted H(-) beam current is limited by the achievable plasma density which depends primarily on the electron emission current from the filaments. The emission current can be increased by increasing the filament temperature but, unfortunately, this leads not only to shorter filament lifetime but also to an increase in metal evaporation from the filament, which deposits on the H(-) converter surface and degrades its performance. Therefore, we have started an ion source development project focused on replacing these thermionic cathodes (filaments) of the converter source by a helicon plasma generator capable of producing high-density hydrogen plasmas with low electron energy. In our studies which have so far shown that the plasma density of the surface conversion source can be increased significantly by exciting a helicon wave in the plasma, and we expect to improve the performance of the surface converter H(-) ion source in terms of beam brightness and time between services. The design of this new source and preliminary results are presented, along with a discussion of physical processes relevant for H(-) ion beam production with this novel design. Ultimately, we perceive this approach as an interim step towards our long-term goal, combining a helicon plasma generator with an SNS-type main discharge chamber, which will allow us to individually optimize the plasma properties of the plasma cathode (helicon) and H(-) production (main discharge) in order to further improve the brightness of extracted H(-) ion beams.

  9. Helicon plasma generator-assisted surface conversion ion source for the production of H- ion beams at the Los Alamos Neutron Science Centera)

    Science.gov (United States)

    Tarvainen, O.; Rouleau, G.; Keller, R.; Geros, E.; Stelzer, J.; Ferris, J.

    2008-02-01

    The converter-type negative ion source currently employed at the Los Alamos Neutron Science Center (LANSCE) is based on cesium enhanced surface production of H- ion beams in a filament-driven discharge. In this kind of an ion source the extracted H- beam current is limited by the achievable plasma density which depends primarily on the electron emission current from the filaments. The emission current can be increased by increasing the filament temperature but, unfortunately, this leads not only to shorter filament lifetime but also to an increase in metal evaporation from the filament, which deposits on the H- converter surface and degrades its performance. Therefore, we have started an ion source development project focused on replacing these thermionic cathodes (filaments) of the converter source by a helicon plasma generator capable of producing high-density hydrogen plasmas with low electron energy. In our studies which have so far shown that the plasma density of the surface conversion source can be increased significantly by exciting a helicon wave in the plasma, and we expect to improve the performance of the surface converter H- ion source in terms of beam brightness and time between services. The design of this new source and preliminary results are presented, along with a discussion of physical processes relevant for H- ion beam production with this novel design. Ultimately, we perceive this approach as an interim step towards our long-term goal, combining a helicon plasma generator with an SNS-type main discharge chamber, which will allow us to individually optimize the plasma properties of the plasma cathode (helicon) and H- production (main discharge) in order to further improve the brightness of extracted H- ion beams.

  10. Helicon plasma generator-assisted surface conversion ion source for the production of H- ion beams at the Los Alamos Neutron Science Center

    International Nuclear Information System (INIS)

    Tarvainen, O.; Rouleau, G.; Keller, R.; Geros, E.; Stelzer, J.; Ferris, J.

    2008-01-01

    The converter-type negative ion source currently employed at the Los Alamos Neutron Science Center (LANSCE) is based on cesium enhanced surface production of H - ion beams in a filament-driven discharge. In this kind of an ion source the extracted H - beam current is limited by the achievable plasma density which depends primarily on the electron emission current from the filaments. The emission current can be increased by increasing the filament temperature but, unfortunately, this leads not only to shorter filament lifetime but also to an increase in metal evaporation from the filament, which deposits on the H - converter surface and degrades its performance. Therefore, we have started an ion source development project focused on replacing these thermionic cathodes (filaments) of the converter source by a helicon plasma generator capable of producing high-density hydrogen plasmas with low electron energy. In our studies which have so far shown that the plasma density of the surface conversion source can be increased significantly by exciting a helicon wave in the plasma, and we expect to improve the performance of the surface converter H - ion source in terms of beam brightness and time between services. The design of this new source and preliminary results are presented, along with a discussion of physical processes relevant for H - ion beam production with this novel design. Ultimately, we perceive this approach as an interim step towards our long-term goal, combining a helicon plasma generator with an SNS-type main discharge chamber, which will allow us to individually optimize the plasma properties of the plasma cathode (helicon) and H - production (main discharge) in order to further improve the brightness of extracted H - ion beams

  11. Composite materials and structures: Science, technology and applications. A compendium of books, review papers, and other sources of information

    Energy Technology Data Exchange (ETDEWEB)

    Bogdanovich, A.E.; Sierakowski, R.L.

    1999-12-01

    A fast growing volume of literature in various fields of composite materials and structures has inspired the authors to attempt to assemble all major books and review papers in a concise compendium presented here. This could give researchers, engineers, designers, and graduate students a rapid access to the vast volume of references on any specific topic in the field of composites and thereby satisfy their research requirements. The compendium includes encyclopedias, handbooks, design guides, textbooks, reference books, review papers and also a few collections of papers. The topics span theory, modeling and analysis of composite materials, processing and manufacturing, properties and characterization, theory and analysis of composite structures, joints and connections, designing with composites, and composites applications. The compendium includes over 400 references, which are arranged in alphabetical order within each topic under consideration. Additionally, the reader can find, in this compendium, the lists of major conferences, journals, and ASTM STP publications on composites. The major objective of this work is not critically reviewing or discussing specific research approaches and results. The authors have rather intended to provide extensive bibliographic information that may help the reader to get familiar with the primary literature and, in necessary, undertake further literature search on any particular problem of interest.

  12. Libraries Demonstrate Low Adherence to Virtual Reference Service Guidelines. A Review of: Shachaf, Pnina, and Sarah M. Horowitz. “Virtual Reference Service Evaluation: Adherence to RUSA Behavioral Guidelines and IFLA Digital Reference Guidelines.” Library & Information Science Research 30.2 (2008: 122-37.

    Directory of Open Access Journals (Sweden)

    Elise Cogo

    2009-06-01

    Full Text Available Objectives – This study evaluates the level to which virtual (asynchronous e-mail reference services adhere to professional guidelines. Specifically, it addresses the following research questions:1 To what extent do virtual reference services adhere to the American Library Association (ALA Reference and User Services Association (RUSA and the International Federation of Library Associations (IFLA guidelines?2 How does the level of adherence to RUSA or IFLA guidelines vary based on request type, user name, and institution?3 Is there a correlation between outcome measures of reference transactions (accuracy, completeness, and satisfaction and the level of adherence to RUSA or IFLA guidelines?Design – Unobtrusive evaluation of researcher-generated queries.Setting – Fifty-four academic libraries in North America.Subjects – A total of 324 queries were sent to the 54 libraries, with each library receiving six different types of requests from six different user names.Methods – Researchers developed two coding schemes for the guidelines (34 codes and 12 attributes for the RUSA guidelines and 33 codes and 10 attributes for the IFLA guidelines. Each of the six user names used represented an ethnic and/or religious group identity: Mary Anderson (Caucasian, Christian, Moshe Cohen (Caucasian, Jewish, Ahmed Ibrahim (Arab, Latoya Johnson (African American, Rosa Manuz (Hispanic, and Chang Su (Asian. The six request types were designed so that three would be answered (questions 1-3 and three would be out of scope and not answered (questions 4-6. The following queries were sent, individualized for each institution: 1 Dissertation query; 2 Sports team query; 3 Population query; 4 Subject query; 5 Article query; 6 Request for a PDF copy. The 324 queries were uploaded into NVivo 2 software, and all e-mail transactions were coded and analyzed.Main Results – Analysis of the 324 transactions from 54 libraries showed the following results:1 Low levels of

  13. Research Needs and Challenges from Science to Decision Support. Lesson Learnt from the Development of the International Reference Life Cycle Data System (ILCD) Recommendations for Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Sala, Serenella; Pant, Rana; Hauschild, Michael Zwicky

    2012-01-01

    Environmental implications of the whole supply-chain of products, both goods and services, their use, and waste management, i.e., their entire life cycle from "cradle to grave" have to be considered to achieve more sustainable production and consumption patterns. Progress toward environmental...... sustainability requires enhancing the methodologies for quantitative, integrated environmental assessment and promoting the use of these methodologies in different domains. In the context of Life Cycle Assessment (LCA) of products, in recent years, several methodologies have been developed for Life Cycle Impact...... Assessment (LCIA). The Joint Research Center of the European Commission (EC-JRC) led a "science to decision support" process which resulted in the International Reference Life Cycle Data System (ILCD) Handbook, providing guidelines to the decision and application of methods for LCIA. The Handbook...

  14. Will our Current Data Rescue, Curation and Preservation Practices bring us out of the Digital Dark Ages and into the Renaissance of Multi-Source Science? (Invited)

    Science.gov (United States)

    Wyborn, L. A.

    2013-12-01

    The emergence of the fourth paradigm of data intensive science in 2007 showed great promise: it offered a new fundamental methodology in scientific exploration in which researchers would be able to harness the huge increase in data volumes coming from new and more powerful instruments that were collecting data at unprecedented rates and at ever increasing resolutions. Given the potential this new methodology offered, decadal challenges were issued to the Earth and Space Science community to come together and work on problems such as impacts of climate change; sustainably exploiting scarce water, mineral and petroleum resources; and protecting our communities through better prediction of the behaviour of natural hazards. Such challenges require the capability to integrate heterogeneous data sets, from multiple sources, across multiple domains and at low transactional cost. To help realise these visions significant investments were made globally in cyberinfrastructures (computer centres, research clouds, data stores, high speed networks, etc.). Combined, these infrastructures are now capable of analysing petabyte size chunks of data, and the climate community is close to operating at exascale. But have we actually realised the vision of data intensive science? The simple reality is that data intensive science requires the capability to find and analyse large volumes of data in real time via machine to machine interactions. It is not necessarily just about ';Big Data' sets collected from remote instruments such as satellites or sensor networks. ';Long Tail' data sets, traditionally the output of small science campaigns, are vital to calibrating large data sets and need to be stored so that they can be reused and repurposed in ways beyond what the original collector of the data intended they be used for. Particularly for meaningful time series analysis in environmental sciences, there is the additional challenge to store and manage data through decades of multiple

  15. Expert Systems in Reference Services.

    Science.gov (United States)

    Roysdon, Christine, Ed.; White, Howard D., Ed.

    1989-01-01

    Eleven articles introduce expert systems applications in library and information science, and present design and implementation issues of system development for reference services. Topics covered include knowledge based systems, prototype development, the use of artificial intelligence to remedy current system inadequacies, and an expert system to…

  16. Selected Reference Books of 1998.

    Science.gov (United States)

    McIlvaine, Eileen

    1999-01-01

    Reviews a selection of recent scholarly and general reference works under the categories of Periodicals and Newspapers, Philosophy, Literature, Film and Radio, Art and Architecture, Music, Political Science, Women's Studies, and History. A brief summary of new editions of standard works is provided at the end of the articles. (AEF)

  17. Research Needs and Challenges from Science to Decision Support. Lesson Learnt from the Development of the International Reference Life Cycle Data System (ILCD Recommendations for Life Cycle Impact Assessment

    Directory of Open Access Journals (Sweden)

    Serenella Sala

    2012-06-01

    Full Text Available Environmental implications of the whole supply-chain of products, both goods and services, their use, and waste management, i.e., their entire life cycle from “cradle to grave” have to be considered to achieve more sustainable production and consumption patterns. Progress toward environmental sustainability requires enhancing the methodologies for quantitative, integrated environmental assessment and promoting the use of these methodologies in different domains. In the context of Life Cycle Assessment (LCA of products, in recent years, several methodologies have been developed for Life Cycle Impact Assessment (LCIA. The Joint Research Center of the European Commission (EC-JRC led a “science to decision support” process which resulted in the International Reference Life Cycle Data System (ILCD Handbook, providing guidelines to the decision and application of methods for LCIA. The Handbook is the result of a comprehensive process of evaluation and selection of existing methods based on a set of scientific and stakeholder acceptance criteria and involving review and consultation by experts, advisory groups and the public. In this study, we report the main features of the ILCD LCIA recommendation development highlighting relevant issues emerged from this “from science to decision support” process in terms of research needs and challenges for LCIA. Comprehensiveness of the assessment, as well as acceptability and applicability of the scientific developments by the stakeholders, are key elements for the design of new methods and to guarantee the mainstreaming of the sustainability concept.

  18. Coal Data: A reference

    International Nuclear Information System (INIS)

    1991-01-01

    The purpose of Coal Data: A Reference is to provide basic information on the mining and use of coal, an important source of energy in the United States. The report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ''Coal Terminology and Related Information'' provides additional information about terms mentioned in the text and introduces new terms. Topics covered are US coal deposits, resources and reserves, mining, production, employment and productivity, health and safety, preparation, transportation, supply and stocks, use, coal, the environment, and more. (VC)

  19. On the operation of the Structural Materials Science end-station of the Kurchatov synchrotron radiation source in 2006

    International Nuclear Information System (INIS)

    Veligzhanin, A.A.; Guseva, E.V.; Zubavichus, Ya.V.; Trigub, A.L.; Chernyshev, A.A.

    2007-01-01

    The findings of investigation conducted at the end-station STM (Structural Materials Science) installed at the Kurchatov Centre for Synchrotron Radiation and Nanotechnology in 2006 are reported. During the reporting period, a variety of experiments aimed at the solution of diverse fundamental and applied problems have been performed in a cooperation with users from several laboratories located in Moscow, Saint-Petersburg and Rostov-on-Don, specialized in physics, chemistry and materials science. The emphasis in the research activity was placed on combined investigations into the atomic and electronic structures of functional materials with nanosized structural elements, including membrane catalysts, chemical gas sensors, materials with special magnetic, ferroelectric, and thermal properties, etc. In all the cases involved, the approach based on the utilization of the whole assortment of X-ray synchrotron experimental techniques implemented at the end-station STM (viz., small-angle X-ray scattering, X-ray diffraction, and X-ray absorption spectroscopy) provided detailed information on different aspects of the structural organization in the materials under study, which made it possible to suggest the most probable models for their structures [ru

  20. Physiologists against Theology: Science as a source of Secularization in ideology of scientific materialism in the 19th century

    Directory of Open Access Journals (Sweden)

    Vladislav Razdyakonov

    2017-12-01

    Full Text Available Jacob Moleschott (1822–1893, Karl Vogt (1817–1895 and Ludwig Buchner (1824–1899 are known as most notorious German spokesmen on behalf of “Science” in the mid —19th century. They are labelled in Russian historiography as “vulgar materialists” and are contrasted with dialectical materialists in their attitude to philosophy and science. This article shows how they used scientifi c conceptions of human physiology for the validation of their socio-political views, in particular on the role of religion in society and on the gradual secularisation of society. The article proposes critical reassessment of the category “vulgar materialists”, typical of current Russian historiography. It also aims to demonstrate their attitude to theology, philosophy, science and religion as main categories of their discourse. Finally, the article analyses scientifi c arguments in favour of the evolutionary development of society as well as reasons for the rejection of revolutionary practice. Although both “scientifi c materialism” and “scientifi c naturalism” do not meet the criteria of scientifi c ideology, scientifi c activity promotes secularisation by means of the extrapolation of its results to the social and political spheres.

  1. Optically pumped terahertz sources

    Institute of Scientific and Technical Information of China (English)

    ZHONG Kai; SHI Wei; XU DeGang; LIU PengXiang; WANG YuYe; MEI JiaLin; YAN Chao; FU ShiJie; YAO JianQuan

    2017-01-01

    High-power terahertz (THz) generation in the frequency range of0.1-10 THz has been a fast-developing research area ever since the beginning of the THz boom two decades ago,enabling new technological breakthroughs in spectroscopy,communication,imaging,etc.By using optical (laser) pumping methods with near-or mid-infrared (IR) lasers,flexible and practical THz sources covering the whole THz range can be realized to overcome the shortage of electronic THz sources and now they are playing important roles in THz science and technology.This paper overviews various optically pumped THz sources,including femtosecond laser based ultrafast broadband THz generation,monochromatic widely tunable THz generation,single-mode on-chip THz source from photomixing,and the traditional powerful THz gas lasers.Full descriptions from basic principles to the latest progress are presented and their advantages and disadvantages are discussed as well.It is expected that this review gives a comprehensive reference to researchers in this area and additionally helps newcomers to quickly gain understanding of optically pumped THz sources.

  2. Career Coaches as a Source of Vicarious Learning for Racial and Ethnic Minority PhD Students in the Biomedical Sciences: A Qualitative Study.

    Science.gov (United States)

    Williams, Simon N; Thakore, Bhoomi K; McGee, Richard

    2016-01-01

    Many recent mentoring initiatives have sought to help improve the proportion of underrepresented racial and ethnic minorities (URMs) in academic positions across the biomedical sciences. However, the intractable nature of the problem of underrepresentation suggests that many young scientists may require supplemental career development beyond what many mentors are able to offer. As an adjunct to traditional scientific mentoring, we created a novel academic career "coaching" intervention for PhD students in the biomedical sciences. To determine whether and how academic career coaches can provide effective career-development-related learning experiences for URM PhD students in the biomedical sciences. We focus specifically on vicarious learning experiences, where individuals learn indirectly through the experiences of others. The intervention is being tested as part of a longitudinal randomized control trial (RCT). Here, we describe a nested qualitative study, using a framework approach to analyze data from a total of 48 semi-structured interviews from 24 URM PhD students (2 interviews per participant, 1 at baseline, 1 at 12-month follow-up) (16 female, 8 male; 11 Black, 12 Hispanic, 1 Native-American). We explored the role of the coach as a source of vicarious learning, in relation to the students' goal of being future biomedical science faculty. Coaches were resources through which most students in the study were able to learn vicariously about how to pursue, and succeed within, an academic career. Coaches were particularly useful in instances where students' research mentors are unable to provide such vicarious learning opportunities, for example because the mentor is too busy to have career-related discussions with a student, or because they have, or value, a different type of academic career to the type the student hopes to achieve. Coaching can be an important way to address the lack of structured career development that students receive in their home training

  3. A dedicated superbend x-ray microdiffraction beamline for materials, geo-, and environmental sciences at the advanced light source

    Energy Technology Data Exchange (ETDEWEB)

    Advanced Light Source; Kunz, Martin; Tamura, Nobumichi; Chen, Kai; MacDowell, Alastair A.; Celestre, Richard S.; Church, Matthew M.; Fakra, Sirine; Domning, Edward E.; Glossinger, James M.; Kirschman, Jonathan L.; Morrison, Gregory Y.; Plate, Dave W.; Smith, Brian V.; Warwick, Tony; Padmore, Howard A.; Ustundag, Ersan; Yashchuk, Valeriy V.

    2009-03-24

    A new facility for microdiffraction strain measurements and microfluorescence mapping has been built on beamline 12.3.2 at the advanced light source of the Lawrence Berkeley National Laboratory. This beamline benefits from the hard x-radiation generated by a 6 T superconducting bending magnet (superbend) This provides a hard x-ray spectrum from 5 to 22 keV and a flux within a 1 mu m spot of ~;;5x109 photons/ s (0.1percent bandwidth at 8 keV). The radiation is relayed from the superbend source to a focus in the experimental hutch by a toroidal mirror. The focus spot is tailored bytwo pairs of adjustable slits, which serve as secondary source point. Inside the lead hutch, a pair of Kirkpatrick-Baez (KB) mirrors placed in a vacuum tank refocuses the secondary slit source onto the sample position. A new KB-bending mechanism with active temperature stabilization allows for more reproducible and stable mirror bending and thus mirror focusing. Focus spots around 1 um are routinely achieved and allow a variety of experiments, which have in common the need of spatial resolution. The effective spatial resolution (~;;0.2 mu m) is limited by a convolution of beam size, scan-stage resolution, and stage stability. A four-bounce monochromator consisting of two channel-cut Si(111) crystals placed between the secondary source and KB-mirrors allows for easy changes between white-beam and monochromatic experiments while maintaining a fixed beam position. High resolution stage scans are performed while recording a fluorescence emission signal or an x-ray diffraction signal coming from either a monochromatic or a white focused beam. The former allows for elemental mapping, whereas the latter is used to produce two-dimensional maps of crystal-phases, -orientation, -texture, and -strain/stress. Typically achieved strain resolution is in the order of 5x10-5 strain units. Accurate sample positioning in the x-ray focus spot is achieved with a commercial laser-triangulation unit. A Si

  4. CAN-SDI: experience with multi-source computer based current awareness services in the National Science Library, Ottawa.

    Science.gov (United States)

    Gaffney, I M

    1973-07-01

    CAN/SDI is Canada's national Selective Dissemination of Information Service offering a choice of nine data bases to its scientific and technical community. The system is based on central processing at the National Science Library combined with the utilization of decentralized expertise and resources for profile formulation and user education. Its greatest strength lies in its wide interdisciplinary quality. The major advantage of centralized processing of many data bases is that Canadians need learn only one method of profile formulation to access many files. A breakdown of services used confirms that a single tape service does not cover all the information requirements of most users. On the average each profile accesses approximately 1.5 data bases. Constant subscriber growth and a low cancellation rate indicate that CAN/SDI is and will continue to be an important element in Canada's information system.

  5. Practice as source of learning and knowledge that comes from experience: what science and biology teachers say about it

    Directory of Open Access Journals (Sweden)

    Luciana M. Lunardi Campos

    2001-01-01

    Full Text Available This paper is about the possible knowledge that Science and Biology teachers may acquire form their daily work. Fourth three teachers were considered in this research and all belong to the Public School of the city of Botucatu, S.P. All of them were unanimous in stressing the importance of their professional activity as a meaningful aspect. They learned more about themselves, their methods, their employed resources and their pupils through it. Three dimensions can be pointed out here: personal, professional and pedagogical and it can be named nine aspects of the knowledge from experience. An organized and active knowledge may be achieved by reckoning the teacher as the main producer of knowledge about his occupation and assuming as well how important his practice and knowledge from experience are.

  6. Possibilities of activation analysis with 252Cf sources in the area of earth sciences and mining prospection

    International Nuclear Information System (INIS)

    Melky, Sami.

    1975-01-01

    The 252 Cf neutron activation experimental set-up is composed of four sources of 225μg each, symmetrically disposed with regard to the sample axis. This installation permits the irradiation of 5 to 40cm 3 of ores, so that the analysis is done on sample weighing about 100g. This method allows, not only the determination of major and minor constituents in the sample, but also the determination of some trace elements. The experimental sensitivity of some important elements are given in mining prospection and it is shown that direct gamma spectrometry after activation permits a fast and precise determination of many elements in ores [fr

  7. Electroacoustical reference data

    CERN Document Server

    Eargle, John M

    2002-01-01

    The need for a general collection of electroacoustical reference and design data in graphical form has been felt by acousticians and engineers for some time. This type of data can otherwise only be found in a collection of handbooks. Therefore, it is the author's intention that this book serve as a single source for many electroacoustical reference and system design requirements. In form, the volume closely resembles Frank Massa's Acoustic Design Charts, a handy book dating from 1942 that has long been out of print. The basic format of Massa's book has been followed here: For each entry, graphical data are presented on the right page, while text, examples, and refer­ ences appear on the left page. In this manner, the user can solve a given problem without thumbing from one page to the next. All graphs and charts have been scaled for ease in data entry and reading. The book is divided into the following sections: A. General Acoustical Relationships. This section covers the behavior of sound transmis­ sion in...

  8. Computer science II essentials

    CERN Document Server

    Raus, Randall

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Computer Science II includes organization of a computer, memory and input/output, coding, data structures, and program development. Also included is an overview of the most commonly

  9. Scientometrics: Nature Index and Brazilian science.

    Science.gov (United States)

    Silva, Valter

    2016-09-01

    A recent published newspaper article commented on the (lack of) quality of Brazilian science and its (in) efficiency. The newspaper article was based on a special issue of Nature and on a new resource for scientometrics called Nature Index. I show here arguments and sources of bias that, under the light of the principle in dubio pro reo, it is questionable to dispute the quality and efficiency of the Brazilian science on these grounds, as it was commented on the referred article. A brief overview of Brazilian science is provided for readers to make their own judgment.

  10. Enhanced electricity system analysis for decision making - A reference book[Inter-agency joint project on data bases and methodologies for comparative assessment of different energy sources for electricity generation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-06-01

    The objective of electricity system analysis in support of decision making is to provide comparative assessment results upon which relevant policy choices between alternative technology options and supply strategies can be based. This reference book offers analysts, planners and decision makers documented information on enhanced approaches to electricity system analysis, that can assist in achieving this objective. The book describes the main elements of comprehensive electricity system analysis and outlines an advanced integrated analysis and decision making framework for the electric power sector. Emphasis is placed on mechanisms for building consensus between interested and affected parties, and on aspects of planning that go beyond the traditional economic optimisation approach. The scope and contents of the book cover the topics to be addressed in decision making for the power sector and the process of integrating economic, social, health and environmental aspects in the comparative assessment of alternative options and strategies. The book describes and discusses overall frameworks, processes and state of the art methods and techniques available to analysts and planners for carrying out comparative assessment studies, in order to provide sound information to decision makers. This reference book is published as part of a series of technical reports and documents prepared in the framework of the inter-agency joint project (DECADES) on databases and methodologies for comparative assessment of different energy sources for electricity generation. The overall objective of the DECADES project is to enhance capabilities for incorporating economic, social, health and environmental issues in the comparative assessment of electricity generation options and strategies in the process of decision making for the power sector. The project, established in 1992, is carried out jointly by the European Commission (EC), the Economic and Social Commission for Asia and the Pacific

  11. Crowd-sourcing, Communicating, and Improving Auroral Science at the Speed of Social Media through Aurorasaurus.org

    Science.gov (United States)

    Patel, K.; MacDonald, E.; Case, N.; Hall, M.; Clayton, J.; Heavner, M.; Tapia, A.; Lalone, N.; McCloat, S.

    2015-12-01

    On March 17, 2015, a geomagnetic storm—the largest of the solar cycle to date— hit Earth and gave many sky watchers around the world a beautiful auroral display. People made thousands of aurora-related tweets and direct reports to Aurorasaurus.org, an interdisciplinary citizen science project that tracks auroras worldwide in real-time through social media and the project's apps and website. Through Aurorasaurus, researchers are converting these crowdsourced observations into valuable data points to help improve models of where aurora can be seen. In this presentation, we will highlight how the team communicates with the public during these global, sporadic events to help drive and retain participation for Aurorasaurus. We will highlight some of the co-produced scientific results and increased media interest following this event. Aurorasaurus uses mobile apps, blogging, and a volunteer scientist network to reach out to aurora enthusiasts to engage in the project. Real-time tweets are voted on by other users to verify their accuracy and are pinned on a map located on aurorasaurus.org to help show the instantaneous, global auroral visibility. Since the project launched in October 2014, hundreds of users have documented the two largest geomagnetic storms of this solar cycle. In some cases, like for the St. Patrick's Day storm, users even reported seeing aurora in areas different than aurora models suggested. Online analytics indicate these events drive users to our page and many also share images with various interest groups on social media. While citizen scientists provide observations, Aurorasaurus gives back by providing tools to help the public see and understand the aurora. When people verify auroral sightings in a specific area, the project sends out alerts to nearby users of possible auroral visibility. Aurorasaurus team members around the world also help the public understand the intricacies of space weather and aurora science through blog articles

  12. Sample size of the reference sample in a case-augmented study.

    Science.gov (United States)

    Ghosh, Palash; Dewanji, Anup

    2017-05-01

    The case-augmented study, in which a case sample is augmented with a reference (random) sample from the source population with only covariates information known, is becoming popular in different areas of applied science such as pharmacovigilance, ecology, and econometrics. In general, the case sample is available from some source (for example, hospital database, case registry, etc.); however, the reference sample is required to be drawn from the corresponding source population. The required minimum size of the reference sample is an important issue in this regard. In this work, we address the minimum sample size calculation and discuss related issues. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  13. Identifying Sources of Scientific Knowledge: classifying non-source items in the WoS

    Energy Technology Data Exchange (ETDEWEB)

    Calero-Medina, C.M.

    2016-07-01

    The sources of scientific knowledge can be tracked using the references in scientific publications. For instance, the publications from the scientific journals covered by the Web of Science database (WoS) contain references to publications for which an indexed source record exist in the WoS (source items) or to references for which an indexed source record does not exist in the WoS (non-source items). The classification of the non-source items is the main objective of the work in progress presented here. Some other scholars have classified and identified non-source items with different purposes (e.g. Butler & Visser (2006); Liseé, Larivière & Archambault (2008); Nerderhof, van Leeuwen & van Raan (2010); Hicks & Wang (2013); Boyack & Klavans (2014)). But these studies are focused in specific source types, fields or set of papers. The work presented here is much broader in terms of the number of publications, source types and fields. (Author)

  14. Edaq530: a transparent, open-end and open-source measurement solution in natural science education

    Energy Technology Data Exchange (ETDEWEB)

    Kopasz, Katalin; Makra, Peter; Gingl, Zoltan, E-mail: phil@titan.physx.u-szeged.hu [Department of Experimental Physics, University of Szeged, Dom ter 9, Szeged, H6720 (Hungary)

    2011-03-15

    We present Edaq530, a low-cost, compact and easy-to-use digital measurement solution consisting of a thumb-sized USB-to-sensor interface and measurement software. The solution is fully open-source, our aim being to provide a viable alternative to professional solutions. Our main focus in designing Edaq530 has been versatility and transparency. In this paper, we shall introduce the capabilities of Edaq530, complement it by showing a few sample experiments, and discuss the feedback we have received in the course of a teacher training workshop in which the participants received personal copies of Edaq530 and later made reports on how they could utilize Edaq530 in their teaching.

  15. Versatile piezoelectric pulsed molecular beam source for gaseous compounds and organic molecules with femtomole accuracy for UHV and surface science applications

    International Nuclear Information System (INIS)

    Schiesser, Alexander; Schaefer, Rolf

    2009-01-01

    This note describes the construction of a piezoelectric pulsed molecular beam source based upon a design presented in an earlier work [D. Proch and T. Trickl, Rev. Sci. Instrum. 60, 713 (1988)]. The design features significant modifications that permit the determination of the number of molecules in a beam pulse with an accuracy of 1x10 11 molecules per pulse. The 21 cm long plunger-nozzle setup allows the molecules to be brought to any point of the UHV chamber with very high intensity. Furthermore, besides typical gaseous compounds, also smaller organic molecules with a vapor pressure higher than 0.1 mbar at room temperature may serve as feed material. This makes the new design suitable for various applications in chemical and surface science studies.

  16. Marine Science

    African Journals Online (AJOL)

    Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue for the wide dissem- ... consist of special issues on major events or important thematic issues. ... of sources, including plant and animal by- products.

  17. The ESA Mice in Space (MIS) habitat: effects of cage confinement on neuromusculoskeletal structure and function and stress/behavior using wild-type C57Bl/6JRj mice in a modular science reference model (MSRM) test on ground

    Science.gov (United States)

    Blottner, Dieter; Vico, Laurence; Jamon, D. Berckmansp L. Vicop Y. Liup R. Canceddap M.

    Background: Environmental conditions likely affect physiology and behaviour of mice used for Life Sciences Research on Earth and in Space. Thus, mice habitats with sufficient statistical numbers should be developed for adequate life support and care and that should meet all nesces-sary ethical and scientific requirements needed to successfully perform animal experimentation in Space. Aim of study: We here analysed the effects of cage confinement on the weightbear-ing musculoskeletal system, behaviour and stress of wild-type mice (C57BL/6JRj, 30 g b.wt., total n = 24) housed for 25 days in a prototypical ground-based MSRM (modular science ref-erence module) in the frame of breadboard activities for a fully automated life support habitat called "Mice in Space" (MIS) at the Leuven University, Belgium. Results: Compared with control housing (individually ventilated cages, IVC-mice) the MIS mice revealed no significant changes in soleus muscle size and myofiber distribution (type I vs. II) and quality of bone (3-D microarchitecture and mineralisation of calvaria, spine and femur) determined by confocal and micro-computed tomography. Corticosterone metabolism measured non-invasively (faeces) monitored elevated adrenocortical activity at only start of the MIS cage confinement (day 1). Behavioural tests (i.e., grip strength, rotarod, L/D box, elevated plus-maze, open field, ag-gressiveness) performed subsequently revealed only minor changes in motor performance (MIS vs. controls). Conclusions: The MIS habitat will not, on its own, produce major effects that could confound interpretation of data induced by microgravity exposure on orbit as planned for future biosatellite programmes. Sponsors: ESA-ESTEC, Noordwijk, NL

  18. Selected Reference Books of 1998-99.

    Science.gov (United States)

    McIlvaine, Eileen

    1999-01-01

    Presents an annotated bibliography of selected reference books published between 1998 and 1999 under subject headings for biography, journalism, mythology, languages and literature, architecture and city planning, political science, economics, history, and new editions and supplements. (LRW)

  19. Computational science and re-discovery: open-source implementation of ellipsoidal harmonics for problems in potential theory

    International Nuclear Information System (INIS)

    Bardhan, Jaydeep P; Knepley, Matthew G

    2012-01-01

    We present two open-source (BSD) implementations of ellipsoidal harmonic expansions for solving problems of potential theory using separation of variables. Ellipsoidal harmonics are used surprisingly infrequently, considering their substantial value for problems ranging in scale from molecules to the entire solar system. In this paper, we suggest two possible reasons for the paucity relative to spherical harmonics. The first is essentially historical—ellipsoidal harmonics developed during the late 19th century and early 20th, when it was found that only the lowest-order harmonics are expressible in closed form. Each higher-order term requires the solution of an eigenvalue problem, and tedious manual computation seems to have discouraged applications and theoretical studies. The second explanation is practical: even with modern computers and accurate eigenvalue algorithms, expansions in ellipsoidal harmonics are significantly more challenging to compute than those in Cartesian or spherical coordinates. The present implementations reduce the 'barrier to entry' by providing an easy and free way for the community to begin using ellipsoidal harmonics in actual research. We demonstrate our implementation using the specific and physiologically crucial problem of how charged proteins interact with their environment, and ask: what other analytical tools await re-discovery in an era of inexpensive computation?

  20. Life sciences

    Energy Technology Data Exchange (ETDEWEB)

    Day, L. (ed.)

    1991-04-01

    This document is the 1989--1990 Annual Report for the Life Sciences Divisions of the University of California/Lawrence Berkeley Laboratory. Specific progress reports are included for the Cell and Molecular Biology Division, the Research Medicine and Radiation Biophysics Division (including the Advanced Light Source Life Sciences Center), and the Chemical Biodynamics Division. 450 refs., 46 figs. (MHB)

  1. Life sciences

    International Nuclear Information System (INIS)

    Day, L.

    1991-04-01

    This document is the 1989--1990 Annual Report for the Life Sciences Divisions of the University of California/Lawrence Berkeley Laboratory. Specific progress reports are included for the Cell and Molecular Biology Division, the Research Medicine and Radiation Biophysics Division (including the Advanced Light Source Life Sciences Center), and the Chemical Biodynamics Division. 450 refs., 46 figs

  2. Development of beta reference radiations

    International Nuclear Information System (INIS)

    Wan Zhaoyong; Cai Shanyu; Li Yanbo; Yin Wei; Feng Jiamin; Sun Yuhua; Li Yongqiang

    1997-09-01

    A system of beta reference radiation has been developed, that is composed of 740 MBq 147 Pm beta source, 74 MBq and 740 MBq 90 Sr + 90 Y β sources, compensation filters, a source handling tool, a source jig, spacing bars, a shutter, a control unit and a beta dose meter calibration stand. For 740 MBq 147 Pm and 74 MBq 90 Sr + 90 Y beta reference radiations with compensation filters and 740 MBq 90 Sr + 90 Y beta reference radiation without compensation filter, at 20 cm, 30 cm and 30 cm distance separately; the residual energy of maximum is 0.14 MeV, 1.98 MeV and 2.18 MeV separately; the absorbed dose to tissue D (0.07) is 1.547 mGy/h (1996-05-20), 5.037 mGy/h (1996-05-10) and 93.57 mGy/h (1996-05-15) separately; the total uncertainty is 3.0%, 1.7% and 1.7% separately. For the first and the second beta reference radiation, the dose rate variability in the area of 18 cm diameter in the plane perpendicular to the beta-ray beam axis is within +-6% and +-3% separately. (3 refs., 2 tabs., 8 figs.)

  3. The contribution of different information sources for adverse effects data.

    Science.gov (United States)

    Golder, Su; Loke, Yoon K

    2012-04-01

    The aim of this study is to determine the relative value and contribution of searching different sources to identify adverse effects data. The process of updating a systematic review and meta-analysis of thiazolidinedione-related fractures in patients with type 2 diabetes mellitus was used as a case study. For each source searched, a record was made for each relevant reference included in the review noting whether it was retrieved with the search strategy used and whether it was available but not retrieved. The sensitivity, precision, and number needed to read from searching each source and from different combinations of sources were also calculated. There were 58 relevant references which presented sufficient numerical data to be included in a meta-analysis of fractures and bone mineral density. The highest number of relevant references were retrieved from Science Citation Index (SCI) (35), followed by BIOSIS Previews (27) and EMBASE (24). The precision of the searches varied from 0.88% (Scirus) to 41.67% (CENTRAL). With the search strategies used, the minimum combination of sources required to retrieve all the relevant references was; the GlaxoSmithKline (GSK) website, Science Citation Index (SCI), EMBASE, BIOSIS Previews, British Library Direct, Medscape DrugInfo, handsearching and reference checking, AHFS First, and Thomson Reuters Integrity or Conference Papers Index (CPI). In order to identify all the relevant references for this case study a number of different sources needed to be searched. The minimum combination of sources required to identify all the relevant references did not include MEDLINE.

  4. A reference tristimulus colorimeter

    Science.gov (United States)

    Eppeldauer, George P.

    2002-06-01

    A reference tristimulus colorimeter has been developed at NIST with a transmission-type silicon trap detector (1) and four temperature-controlled filter packages to realize the Commission Internationale de l'Eclairage (CIE) x(λ), y(λ) and z(λ) color matching functions (2). Instead of lamp standards, high accuracy detector standards are used for the colorimeter calibration. A detector-based calibration procedure is being suggested for tristimulus colorimeters wehre the absolute spectral responsivity of the tristimulus channels is determined. Then, color (spectral) correct and peak (amplitude) normalization are applied to minimize uncertainties caused by the imperfect realizations of the CIE functions. As a result of the corrections, the chromaticity coordinates of stable light sources with different spectral power distributions can be measured with uncertainties less than 0.0005 (k=1).

  5. Tank characterization reference guide

    International Nuclear Information System (INIS)

    De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J.; Simpson, B.C.

    1994-09-01

    Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research

  6. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  7. Common Earth Science Misconceptions in Science Teaching

    Science.gov (United States)

    King, Chris

    2012-01-01

    A survey of the Earth science content of science textbooks found a wide range of misconceptions. These are discussed in this article with reference to the published literature on Earth science misconceptions. Most misconceptions occurred in the "sedimentary rocks and processes" and "Earth's structure and plate tectonics"…

  8. The Importance of Proper Citation of References in Biomedical Articles

    Science.gov (United States)

    Masic, Izet

    2013-01-01

    In scientific circles, the reference is the information that is necessary to the reader in identifying and finding used sources. The basic rule when listing the sources used is that references must be accurate, complete and should be consistently applied. On the other hand, quoting implies verbatim written or verbal repetition of parts of the text or words written by others that can be checked in original. Authors of every new scientific article need to explain how their study or research fits with previous one in the same or similar fields. A typical article in the health sciences refers to approximately 20-30 other articles published in peer reviewed journals, cite once or hundreds times. Citations typically appear in two formats: a) as in-text citations where the sources of information are briefly identified in the text; or b) in the reference list at the end of the publication (book chapter, manuscript, article, etc.) that provides full bibliographic information for each source. Group of publishers met in Vancouver in 1978 and decided to prescribe uniform technical propositions for publication. Adopted in the 1979 by the National Library of Medicine in Bethesda, then the International Committee of Medical Journals Editors (ICMJE), whose review in 1982 entered the official application by 300 international biomedical journals. Authors writing articles for publication in biomedical publications used predominantly citation styles: Vancouver style, Harward style, PubMed style, ICMJE, APA, etc. The paper gives examples of all of these styles of citation to the authors in order to facilitate their applications. Also in this paper is given the review about the problem of plagiarism which becomes more common in the writing of scientific and technical articles in biomedicine. PMID:24167381

  9. The importance of proper citation of references in biomedical articles.

    Science.gov (United States)

    Masic, Izet

    2013-01-01

    In scientific circles, the reference is the information that is necessary to the reader in identifying and finding used sources. The basic rule when listing the sources used is that references must be accurate, complete and should be consistently applied. On the other hand, quoting implies verbatim written or verbal repetition of parts of the text or words written by others that can be checked in original. Authors of every new scientific article need to explain how their study or research fits with previous one in the same or similar fields. A typical article in the health sciences refers to approximately 20-30 other articles published in peer reviewed journals, cite once or hundreds times. Citations typically appear in two formats: a) as in-text citations where the sources of information are briefly identified in the text; or b) in the reference list at the end of the publication (book chapter, manuscript, article, etc.) that provides full bibliographic information for each source. Group of publishers met in Vancouver in 1978 and decided to prescribe uniform technical propositions for publication. Adopted in the 1979 by the National Library of Medicine in Bethesda, then the International Committee of Medical Journals Editors (ICMJE), whose review in 1982 entered the official application by 300 international biomedical journals. Authors writing articles for publication in biomedical publications used predominantly citation styles: Vancouver style, Harward style, PubMed style, ICMJE, APA, etc. The paper gives examples of all of these styles of citation to the authors in order to facilitate their applications. Also in this paper is given the review about the problem of plagiarism which becomes more common in the writing of scientific and technical articles in biomedicine.

  10. Project X: Accelerator Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Stephen D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-06-20

    applications of muon spin rotation techniques provide sensitive probes of the magnetic structure of materials. Goal: Provide MW-class proton beams at 1 GeV, coupled with novel targets required to support a broad range of materials science and energy applications. Platform for Evolution to Future Frontier Facilities: A high-intensity proton source will strengthen and modernize the Fermilab injector complex, providing a robust platform upon which to build future frontier facilities. The Neutrino Factory and Muon Collider are examples that would provide world-leading capabilities at the Intensity and Energy Frontiers for many decades to come. Goal: Provide a straightforward upgrade path for a 4 MW, low-duty-factor source of protons at energies between 5 and 15 GeV. These four elements are expected to form the basis of the Mission Need statement required for the Department of Energy (DOE) Critical Decision 0 (CD-0), and represent the fundamental design criteria for Project X. The following chapters present the Reference Design for the Project X accelerator facility. The Reference Design is based on a continuous wave (CW) superconducting (SC) linac providing up to 1 and 3 MW of beam power at 1 and 3 GeV respectively. A pulsed linac provides acceleration of roughly 4% of the beam delivered from the CW linac to the 8 GeV injection energy of the existing Recycler/Main Injector complex. Upgrades to the Recycler and Main Injector support a factor of three increase, beyond current capabilities, in proton beam power at 60 to 120 GeV. The Reference Design represents a facility that will be unique in the world with unmatched capabilities for the delivery of very high beam power, with flexible beam formats, to multiple users at multiple energies. The utilization of linacs within the Project X facility enables capabilities beyond what is achievable with circular accelerators. It is anticipated that the final configuration and operating parameters of the complex will be further refined through

  11. Earth, soil and environmental science research facility at sector 13 of the Advanced Photon Source. I. Sector layout and optical design

    Energy Technology Data Exchange (ETDEWEB)

    Eng, P.; Jaski, Y.R.; Lazarz, N.; Murray, P.; Pluth, J.; Rarback, H.; Rivers, M.; Sutton, S. [CARS, University of Chicago, 5640 S. Ellis Avenue, Chicago, IL (United States)

    1996-09-01

    The earth, soil and environmental science component (GSECARS) of the Consortium of Advanced Radiation Sources (CARS), is designing a national research facility to be built at sector 13 of the Advanced Photon Source. The bending magnet beam will be split to allow simultaneous operation of two stations, a monochromatic (8{endash}15 keV) side station and a multipurpose, white beam/monochromatic end station. The undulator beamline will have two white beam stations, which may operate simultaneously using a double-crystal monochromator (cryogenic Si) with a thin first crystal. In this mode, the upstream station will accept the monochromatized (4.5{endash}22 keV) beam deflected horizontally by a third (bendable) Ge crystal, while the end station accepts the high energy component (blue beam) transmitted by the first crystal. The need for small x-ray beams and broad spectral range have led us to base the focusing aspects of the optic design on grazing incidence mirrors. Both our bending magnet and insertion device beamlines will have long ({approximately}1 m), bendable mirrors (demagnification {lt}11, E(cut-off) {approx_gt}70 keV; beam sizes {approx_gt}tens of micrometers). For smaller focal spots, we will use small, dynamically bent Kirpatrick-Baez mirrors (demagnification 100{endash}400; E(cut-off) {lt}70 keV; beam sizes {approximately}1 micrometer). A unique aspect of our insertion device beamline is the ability to deliver focused white beam to the sample, through the incorporation of a power management pinhole in the first optics enclosure. {copyright} {ital 1996 American Institute of Physics.}

  12. História da química e da geologia: Joseph Black e James Hutton como referências para educação em ciências History of chemistry and geology: Joseph Black and James Hutton as references for science education

    Directory of Open Access Journals (Sweden)

    Natalina Aparecida L. Sicca

    2002-07-01

    Full Text Available The second half of eighteenth century is marked by the advancement of chemistry and geology. The first science acquired the law of conservation of mass and this science represented a important support to geology and mineralogy. We say that both became modern science that time. Our aim is to show up some interrelations between history of chemistry and history of geology by means of the study of Joseph Black's and James Hutton's works. We defend that it is positive to science education to understand and approach the relations among different and disciplinary areas of science.

  13. A Case Study of German Language Core Journals for Characterizing Citation Patterns in the Social Sciences

    Directory of Open Access Journals (Sweden)

    Pei-Shan Chi

    2013-12-01

    Full Text Available Publication practices in the social sciences are characterized by the use of heterogeneous publication channels and a stronger national focus (Nederhof, 2006; Hicks & Wang, 2011. At the same time the use of bibliometric indicators in research evaluation promotes journal articles in international peer reviewed journals as the main style of publishing research results. The question emerges to which extent this changes publication practices in these disciplines. In our contribution we address this question and present results of a case study which investigates publication and referencing patterns of core German language journals in sociology and political science. Based on an explorative analysis of reference lists we describe patterns and changes of the parameters of the knowledge base of these journals. The analysis of the results in this study shows that with a total of 67% in the sociology and 76% in the political science the core German journals predominantly refer to non-journal publications. Besides, the share of non-source publications basically remains constant in the time period 2000-2009, and the share of references to source journals is the same in both disciplines. The difference between sociology and political science is: publications in the German language sociology journals have more references to monographs (46% than publications in the German language political science journals (38%, but these political science journals reference to other non-source publications (38% much more than sociology (21%.

  14. Methods and Sources of Data Used to Develop Selected Water-Quality Indicators for Streams and Ground Water for EPA's 2007 Report on the Environment: Science Report

    Science.gov (United States)

    Baker, Nancy T.; Wilson, John T.; Moran, Michael J.

    2008-01-01

    The U.S. Geological Survey (USGS) was one of numerous governmental agencies, private organizations, and the academic community that provided data and interpretations for the U.S. Environmental Protection Agency?s (USEPA) 2007 Report on the Environment: Science Report. This report documents the sources of data and methods used to develop selected water?quality indicators for the 2007 edition of the report compiled by USEPA. Stream and ground?water?quality data collected nationally in a consistent manner as part of the USGS?s National Water?Quality Assessment Program (NAWQA) were provided for several water?quality indicators, including Nitrogen and Phosphorus in Streams in Agricultural Watersheds; Pesticides in Streams in Agricultural Watersheds; and Nitrate and Pesticides in Shallow Ground Water in Agricultural Watersheds. In addition, the USGS provided nitrate (nitrate plus nitrite) and phosphorus riverine load estimates calculated from water?quality and streamflow data collected as part of its National Stream Water Quality Accounting Network (NASQAN) and its Federal?State Cooperative Program for the Nitrogen and Phosphorus Discharge from Large Rivers indicator.

  15. Recent references May through August 1992

    International Nuclear Information System (INIS)

    Ramavataram, S.

    1992-01-01

    In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Listed are Key Numbers and Keywords, a reaction index, and references and secondary sources for the data

  16. 2002 reference document; Document de reference 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  17. History of Science in the United States: A Chronology and Research Guide, by Clark A. Elliott, Garland Reference Library of the Humanities Vol. 1711, Garland Publishing, New York. 1996

    OpenAIRE

    Christenson, Andrew L.

    1996-01-01

    There are four parts to this volume - a chronology of events by year, a chronology of leading scientists grouped by the decade in which they reached 25 years of age? a research guide, and a research bibliography. The author has written extensively on American science, including co-editing the volume Science at Harvard University (reviewed in BHA 2(1):17-19). The volume covers mostly what are termed the "hard" sciences ...

  18. VBE reference framework

    NARCIS (Netherlands)

    Afsarmanesh, H.; Camarinha-Matos, L.M.; Ermilova, E.; Camarinha-Matos, L.M.; Afsarmanesh, H.; Ollus, M.

    2008-01-01

    Defining a comprehensive and generic "reference framework" for Virtual organizations Breeding Environments (VBEs), addressing all their features and characteristics, is challenging. While the definition and modeling of VBEs has become more formalized during the last five years, "reference models"

  19. CMS Statistics Reference Booklet

    Data.gov (United States)

    U.S. Department of Health & Human Services — The annual CMS Statistics reference booklet provides a quick reference for summary information about health expenditures and the Medicare and Medicaid health...

  20. Changing quantum reference frames

    OpenAIRE

    Palmer, Matthew C.; Girelli, Florian; Bartlett, Stephen D.

    2013-01-01

    We consider the process of changing reference frames in the case where the reference frames are quantum systems. We find that, as part of this process, decoherence is necessarily induced on any quantum system described relative to these frames. We explore this process with examples involving reference frames for phase and orientation. Quantifying the effect of changing quantum reference frames serves as a first step in developing a relativity principle for theories in which all objects includ...

  1. Optical laser systems at the Linac Coherent Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Minitti, Michael P.; Robinson, Joseph S.; Coffee, Ryan N.; Edstrom, Steve; Gilevich, Sasha; Glownia, James M.; Granados, Eduardo; Hering, Philippe; Hoffmann, Matthias C.; Miahnahri, Alan; Milathianaki, Despina; Polzin, Wayne; Ratner, Daniel; Tavella, Franz; Vetter, Sharon; Welch, Marc; White, William E.; Fry, Alan R., E-mail: alanfry@slac.stanford.edu [Linac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States)

    2015-04-22

    This manuscript serves as a reference to describe the optical laser sources and capabilities at the Linac Coherent Light Source. Ultrafast optical lasers play an essential role in exploiting the unique capabilities of recently commissioned X-ray free-electron laser facilities such as the Linac Coherent Light Source (LCLS). Pump–probe experimental techniques reveal ultrafast dynamics in atomic and molecular processes and reveal new insights in chemistry, biology, material science and high-energy-density physics. This manuscript describes the laser systems and experimental methods that enable cutting-edge optical laser/X-ray pump–probe experiments to be performed at LCLS.

  2. Conservation Science Fair Projects.

    Science.gov (United States)

    Soil Conservation Society of America, Ankeny, IA.

    Included are ideas, suggestions, and examples for selecting and designing conservation science projects. Over 70 possible conservation subject areas are presented with suggested projects. References are cited with each of these subject areas, and a separate list of annotated references is included. The references pertain to general subject…

  3. IAEA biological reference materials

    International Nuclear Information System (INIS)

    Parr, R.M.; Schelenz, R.; Ballestra, S.

    1988-01-01

    The Analytical Quality Control Services programme of the IAEA encompasses a wide variety of intercomparisons and reference materials. This paper reviews only those aspects of the subject having to do with biological reference materials. The 1988 programme foresees 13 new intercomparison exercises, one for major, minor and trace elements, five for radionuclides, and seven for stable isotopes. Twenty-two natural matrix biological reference materials are available: twelve for major, minor and trace elements, six for radionuclides, and four for chlorinated hydrocarbons. Seven new intercomparisons and reference materials are in preparation or under active consideration. Guidelines on the correct use of reference materials are being prepared for publication in 1989 in consultation with other major international producers and users of biological reference materials. The IAEA database on available reference materials is being updated and expanded in scope, and a new publication is planned for 1989. (orig.)

  4. A primer on polymer nomenclature: Structure-based, sourced-based and trade names

    Science.gov (United States)

    Polymer nomenclature is important because it is part of the language of polymer science and is needed for polymer identification, reference, and documentation. A primer on polymer nomenclature is provided herein for people new to the field or for instructional use. Both structure-based and source-...

  5. Indirect boundary element method on recursive matrix operation to compute waves in irregularly stratified media with infinitely extended interfaces. Perturbation by a point source; Kansetsu kyokai yosoho ni yoru fukisoku seiso kozochu no hadoba no keisanho. Tenshingen ni taisuru reference solution no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Yokoi, T [Akita University, Akita (Japan). Mining College

    1996-05-01

    As a method of computation of wave fields in irregularly stratified media by use of the indirect boundary element method, an induction formula was proposed in a previous report, utilizing the reference solution representing the wave field in corresponding horizontally stratified media. This algorithm applies to other types of vibration source. In computation of a wave field with the focus in presence on the ground or in the ground, the algorithm is incorporated into the computation as a vector including the reference solution as a variable. There exists no need to modify the algorithm. Once the reference solution is obtained, the wave field in the irregularly stratified media is automatically constructed by the proposed algorithm. The wave field to be the reference solution to a point source in the horizontally stratified media, is determined when the solution is obtained of the frequency/wavenumber domain by use of the reflection/transmission matrix of Kennet (1983) and converted into the solution of the spatial domain by use of the discrete wavenumber representation of Bouchon and Aki (1977). 8 refs., 2 figs.

  6. The SciencePAD treasure hunt of Persistent Identifiers

    CERN Multimedia

    Beatrice Bressan, for the European Middleware Initiative (EMI)

    2013-01-01

    Have you ever followed a reference for an article that eventually turned out to be unavailable? Have you always thought that experiment data or research results should be permanently accessible? If so, you will probably be interested in the latest news on the current status of software and digital information issues, and you shouldn’t miss the SciencePAD Persistent Identifiers Workshop (SPID2013).   The workshop is being organised by the European Middleware Initiative (EMI) together with its SciencePAD (formerly known as ScienceSoft) project and will take place on 30 January 2013 at CERN. SciencePAD is a community-enabler, working on providing the necessary one-stop-shop tools, including software, catalogues, statistics, reference citation systems, marketplaces, technical services links, platform integration supports, etc. It allows researchers and open source software developers from scientific communities to interact with each other within and beyond their area of expertise, and co...

  7. Reference design for a centralized spent sealed sources facility. Technical manual for the management of low and intermediate level wastes generated at small nuclear research centres and by radioisotope users in medicine, research and industry

    International Nuclear Information System (INIS)

    1995-07-01

    To assist Member States in establishing facilities in which the most frequently occurring spent sealed sources can be safely conditioned, the IAEA has financed the development of a generic design for a Spent Sealed Sources Facility (SSS Facility). The purpose of this TECDOC is to provide enough general information about the functions and capabilities of the SSS Facility to enable the reader to understand what the facility can do to contribute towards the management of spent sealed sources without providing all the technical and/or design information available. Sufficient information is provided to enable the reader to judge how and to what extent such a facility can contribute to national radioactive waste management infrastructure. 2 refs, 5 figs, 1 tab

  8. Reference design for a centralized spent sealed sources facility. Technical manual for the management of low and intermediate level wastes generated at small nuclear research centres and by radioisotope users in medicine, research and industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    To assist Member States in establishing facilities in which the most frequently occurring spent sealed sources can be safely conditioned, the IAEA has financed the development of a generic design for a Spent Sealed Sources Facility (SSS Facility). The purpose of this TECDOC is to provide enough general information about the functions and capabilities of the SSS Facility to enable the reader to understand what the facility can do to contribute towards the management of spent sealed sources without providing all the technical and/or design information available. Sufficient information is provided to enable the reader to judge how and to what extent such a facility can contribute to national radioactive waste management infrastructure. 2 refs, 5 figs, 1 tab.

  9. Soviet science

    International Nuclear Information System (INIS)

    Medvedev, Z.A.

    1979-01-01

    In this brief history of science in the Soviet Union the emphasis is on the interaction between scientific and technological developments and the political objectives of the Soviet government Reference is made to the development of nuclear energy for military and for peaceful purposes. In an appendix, a rather detailed account is given of a 'nuclear disaster in the South Urals area'; reference is made to ecological, genetic and population researches in the areas contaminated by long-lived products of radioactive waste (e.g. Sr-90 and Cs-137). Section headings are: lakes; mammals; population genetics and radiation genetics (covering plants, animals and soil activity). (U.K.)

  10. RECENT REFERENCES: JULY 1, 2006 TO SEPTEMBER 30, 2006

    Energy Technology Data Exchange (ETDEWEB)

    WINCHELL, D.F.

    2006-09-30

    This document lists experimental references added to Nuclear Science References (NSR) during the period July 1, 2006 to September 30, 2006. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

  11. RECENT REFERENCES: JANUARY 1, 2005 TO DECEMBER 31, 2005

    Energy Technology Data Exchange (ETDEWEB)

    WINCHELL, D.F.

    2005-12-31

    This document lists experimental references added to Nuclear Science References (NSR) during the period January 1, 2005 to December 31, 2005. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

  12. RECENT REFERENCES: OCTOBER 1, 2005 TO DECEMBER 31, 2005

    Energy Technology Data Exchange (ETDEWEB)

    WINCHELL, D.F.

    2005-12-31

    This document lists experimental references added to Nuclear Science References (NSR) during the period October 1, 2005 to December 31, 2005. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

  13. Descriptions of marine mammal specimens in Marine Mammal Osteology Reference Collection, Alaska Fisheries Science Center, National Marine Mammal Laboratory from 1938-01-01 to 2015-12-05 (NCEI Accession 0140937)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NMFS Alaska Fisheries Science Center National Marine Mammal Laboratory (NMML) Marine Mammal Osteology Collection consists of approximately 2500 specimens (skulls...

  14. Indoor air: Reference bibliography

    International Nuclear Information System (INIS)

    Campbell, D.; Staves, D.; McDonald, S.

    1989-07-01

    The U. S. Environmental Protection Agency initially established the indoor air Reference Bibliography in 1987 as an appendix to the Indoor Air Quality Implementation Plan. The document was submitted to Congress as required under Title IV--Radon Gas and Indoor Air Quality Research of the Superfund Amendments and Reauthorization Act of 1986. The Reference Bibliography is an extensive bibliography of reference materials on indoor air pollution. The Bibliography contains over 4500 citations and continues to increase as new articles appear

  15. Android quick APIs reference

    CERN Document Server

    Cinar, Onur

    2015-01-01

    The Android Quick APIs Reference is a condensed code and APIs reference for the new Google Android 5.0 SDK. It presents the essential Android APIs in a well-organized format that can be used as a handy reference. You won't find any technical jargon, bloated samples, drawn out history lessons, or witty stories in this book. What you will find is a software development kit and APIs reference that is concise, to the point and highly accessible. The book is packed with useful information and is a must-have for any mobile or Android app developer or programmer. In the Android Quick APIs Refe

  16. Orphan sources

    International Nuclear Information System (INIS)

    Pust, R.; Urbancik, L.

    2008-01-01

    The presentation describes how the stable detection systems (hereinafter referred to as S DS ) have contributed to reveal the uncontrolled sources of ionizing radiation on the territory of the State Office for Nuclear Safety (SONS) Brno Regional Centre (RC Brno). It also describes the emergencies which were solved by or in which the workers from the Brno. Regional Centre participated in. The contribution is divided into the following chapters: A. SDS systems installed on the territory of SONS RC Brno; B. Selected unusual emergencies; C. Comments to individual emergencies; D. Aspects of SDS operation in term of their users; E. Aspects of SDS operation and related activities in term of radiation protection; F. Current state of orphan sources. (authors)

  17. An undulator based high flux and high resolution beamline for atomic, molecular and optical science (AMOS) research at INDUS-2 synchrotron radiation source (SRS)

    International Nuclear Information System (INIS)

    Das, Asim Kumar; Rajasekhar, B.N.; Sahoo, N.K.

    2014-08-01

    A dedicated UV-VUV and soft X-ray beamline to provide several new research opportunities in Photon induced processes in the energy range of 6-250 eV for Atomic Molecular and Optical Science (AMOS) research, a domain still less explored both at national as well international level, has been proposed by Atomic and Molecular Physics Division, BARC. This beamline will use a planar permanent magnet (PPM) undulator based on Indus-2 Synchrotron Radiation Source (SRS), a 2.5 GeV third generation electron storage ring at RRCAT, Indore, India and is expected to offer a variety of opportunities for more advanced and sustained investigations for AMOS research. A plane mirror and a toroidal mirror are used as the pre-focusing optics of the AMOS beamline. A varied line spacing plane grating monochromator (VLSPGM) in a converging beam, constant included angle mode containing one toroidal focusing mirror and four interchangeable gratings is to be used to cover the energy range of 6 to 250 eV and obtain resolving powers ∼10 4 and intensity ∼10 12 ph/s at the sample position. A toroidal mirror is used to focus the diverging monochromatic light from the monochromator at a distance of 150 cm with a 1:1 magnification. As the first step towards the beamline optics design, the evaluation of the PPM undulator radiation characteristics relevant to beamline design has been performed using the Indus-2 SRS parameters in the long straight section of the ring, PPM undulator parameters, and the empirical expressions available in literature. The software resources such as XOPS, ESRF, France and SPECTRA, Photon factory, Japan have been used for detailed modelling and verification of the empirical computations. Beamline layout preparation, optimization, imaging performance evaluation, and resolving power calculations for ideal beamline optics are carried out using SHADOWVUI, an extension of XOPS software resource. A new mounting of the optical components in the monochromator has been proposed

  18. Science Programs

    Science.gov (United States)

    Laboratory Delivering science and technology to protect our nation and promote world stability Science & ; Innovation Collaboration Careers Community Environment Science & Innovation Facilities Science Pillars Research Library Science Briefs Science News Science Highlights Lab Organizations Science Programs Applied

  19. The pedagogy of argumentation in science education: science teachers' instructional practices

    Science.gov (United States)

    Özdem Yilmaz, Yasemin; Cakiroglu, Jale; Ertepinar, Hamide; Erduran, Sibel

    2017-07-01

    Argumentation has been a prominent concern in science education research and a common goal in science curriculum in many countries over the past decade. With reference to this goal, policy documents burden responsibilities on science teachers, such as involving students in dialogues and being guides in students' spoken or written argumentation. Consequently, teachers' pedagogical practices regarding argumentation gain importance due to their impact on how they incorporate this practice into their classrooms. In this study, therefore, we investigated the instructional strategies adopted by science teachers for their argumentation-based science teaching. Participants were one elementary science teacher, two chemistry teachers, and four graduate students, who have a background in science education. The study took place during a graduate course, which was aimed at developing science teachers' theory and pedagogy of argumentation. Data sources included the participants' video-recorded classroom practices, audio-recorded reflections, post-interviews, and participants' written materials. The findings revealed three typologies of instructional strategies towards argumentation. They are named as Basic Instructional Strategies for Argumentation, Meta-level Instructional ‌St‌‌rategies for ‌Argumentation, and Meta-strategic Instructional ‌St‌‌rategies for ‌Argumentation. In conclusion, the study provided a detailed coding framework for the exploration of science teachers' instructional practices while they are implementing argumentation-based lessons.

  20. Advanced Light Source (ALS)

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Light Source (ALS), a world leader in soft x-ray science, generates light in the wavelengths needed for examining the atomic and electronic structure of...

  1. National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Hulbert, S.L.; Lazarz, N.M.

    1991-04-01

    This report discussion research being conducted at the National Synchrotron light source. In particular, this report contains operations summaries; symposia, workshops, and projects; NSLS highlights; and abstracts of science at the NSLS

  2. Can the Effects of Religion and Spirituality on Both Physical and Mental Health be Scientifically Measured? An Overview of the Key Sources, with Particular Reference to the Teachings of Said Nursi.

    Science.gov (United States)

    Turner, Mahshid

    2015-12-01

    Within Western secular societies, everything has to be substantiated by empirical evidence; this means it has to be quantifiable and measurable. Research, particularly quantitative research, then, is the criterion by which everything, including religion, is either accepted or rejected. The separation of religion from science began with the Renaissance, the Reformation and the advent of the Enlightenment. It was perceived that religion did not match the language of science and that there was no logical proof or empirical evidence for the existence of God. Religion therefore, due to its inability to be measured and quantified, has since been largely marginalised. In recent times, in order to integrate 'religion' into everyday life, attempts have been made to argue and bring in scientific proof for the effectiveness of religion for improved health and well-being. The psychiatrist Harold Koenig has been one of the key people whose collation of research evidence has shown that religion has a positive effect on both physical and mental health. By looking firstly at the definitions of religion and spirituality and then discussing various opinions from both secular and religious perspectives, including those of Said Nursi, this paper aimed to determine whether religion and spirituality can indeed be measured.

  3. Scientific Opinion on Review of the European Union Summary Report on trends and sources of zoonoses, zoonotic agents and food-borne outbreaks—Terms of reference 2 to 7

    OpenAIRE

    EFSA Panel on Animal Health and Welfare (AHAW)

    2013-01-01

    The Animal Health and Welfare (AHAW) Panel of the European Food Safety Authority (EFSA) has evaluated the European Union Summary Report on Trends and Sources of Zoonoses, Zoonotic Agents and Food-borne Outbreaks by EFSA and ECDC (the report) with regard to data needs and subsequent analyses that will minimise the impact of existing data gaps and inconsistencies. Specific assessments performed for bovine tuberculosis, echinococcosis, Q fever, brucellosis, rabies, cysticercosis and tularaemia s...

  4. Marketing Reference Services.

    Science.gov (United States)

    Norman, O. Gene

    1995-01-01

    Relates the marketing concept to library reference services. Highlights include a review of the literature and an overview of marketing, including research, the marketing mix, strategic plan, marketing plan, and marketing audit. Marketing principles are applied to reference services through the marketing mix elements of product, price, place, and…

  5. Reference class forecasting

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    optimisme og misinformation. RCF bygger på teorier, som vandt Daniel Kahneman Nobelprisen i økonomi i 2002. RCF estimerer budgettet for et givet projekt på grundlag af de faktiske udfald for budgetterne i en reference-klasse af projekter. RCF udføres i tre trin: 1. Identifikation af en relevant reference...

  6. History of Science in the United States: A Chronology and Research Guide, by Clark A. Elliott, Garland Reference Library of the Humanities Vol. 1711, Garland Publishing, New York. 1996

    Directory of Open Access Journals (Sweden)

    Andrew L. Christenson

    1996-11-01

    Full Text Available There are four parts to this volume - a chronology of events by year, a chronology of leading scientists grouped by the decade in which they reached 25 years of age? a research guide, and a research bibliography. The author has written extensively on American science, including co-editing the volume Science at Harvard University (reviewed in BHA 2(1:17-19. The volume covers mostly what are termed the "hard" sciences (-.e., chemistry. biology, geology, etc. and touches upon the social sciences only rarely. The chronology. that takes up two thirds of the book, extends from ca. 1493 to 1990 and includes only three archaeological events. An example of these entries follows: "1877. ARCHAEOLOGY Ephraim George Squier (1821-1888 published Peru: Incidents of Travel and Exploration in the Land of the Incas (New York and London. Herelated his discovery of Latin American civilizations that predated the Inca. (p. 114" The scientist cohorts by decade also focuses upon the hard sciences, although three men are singled out from archaeology F. W. Putnam, N. H. Winchell, and T. M. Prodden - a peculiar sample of American archae­ologists indeed!

  7. World Reference Base for Soil Resources

    NARCIS (Netherlands)

    Deckers, J.A.; Driessen, P.M.; Nachtergaele, F.O.; Spaargaren, O.C.

    2002-01-01

    In 1998, the International Union of Soil Sciences (IUSS) officially adopted the world reference base for soil resources (WRB) as the Union's system for soil correlation. The structure, concepts, and definitions of the WRB are strongly influenced by the FAO-UNESCO legend of the soil map of the world

  8. Collaborative Chat Reference Service Effectiveness Varies by Question Type for Public Library Patrons. A review of: Kwon, Nahyun. ʺPublic Library Patronsʹ Use of Collaborative Chat Reference Service: The Effectiveness of Question Answering by Question Type.ʺ Library & Information Science Research 29.1 (Mar. 2007: 70‐91.

    Directory of Open Access Journals (Sweden)

    Stephanie Hall

    2008-03-01

    Full Text Available Objective – To assess the effectiveness of a collaborative chat reference service in answering different types of question. Specifically, the study compares the degree of answer completion and the level of user satisfaction for simple factual questions vs. more in‐depth subject‐based reference questions, and for ‘local’ (pertaining to a particular library and non‐local questions.Design – Content analysis of 415 transcripts of reference transactions, which were also compared to corresponding user satisfaction survey results.Setting – An online collaborative reference service offered by a large public library system (33 branch and regional locations. This service is part of the Metropolitan Cooperative Library System: a virtual reference consortium of U.S. libraries (public, academic, special, and corporate that provides 24/7 service.Subjects – Reference librarians from around the U.S. (49 different libraries, and users logging into the service via the public library system’s portal (primarily patrons of the 49 libraries. Method – Content analysis was used to evaluate virtual reference transcripts recorded between January and June, 2004. Reliability was enhanced through triangulation, with researchers comparing the content analysis of each transcript against the results of a voluntary exit survey. Of 1,387 transactions that occurred during the period of study, 420 users completed the survey and these formed the basis of the study, apart from 5 transactions that were omitted because the questions were incomprehensible. Questions were examined and assigned to five categories: “simple, factual questions; subject‐based research questions; resource access questions; circulation‐related questions; and local library information inquiries” (80‐81. Answers were classed as either “completely answered, partially answered or unanswered, referred, and problematic endings” (82. Lastly, user satisfaction was surveyed on three

  9. Abstracts of the International Congress of Research Center in Sports Sciences, Health Sciences & Human Development (2016

    Directory of Open Access Journals (Sweden)

    Vitor Reis

    2017-06-01

    Full Text Available The papers published in this book of abstracts / proceedings were submitted to the Scientific Commission of the International Congress of Research Center in Sports Sciences, Health Sciences & Human Development, held on 11 and 12 November 2016, at the University of Évora, Évora, Portugal, under the topic of Exercise and Health, Sports and Human Development. The content of the abstracts is solely and exclusively of its authors responsibility. The editors and the Scientific Committee of the International Congress of Research Center in Sports Sciences, Health Sciences & Human Development do not assume any responsibility for the opinions and statements expressed by the authors. Partial reproduction of the texts and their use without commercial purposes is allowed, provided the source / reference is duly mentioned.

  10. Nuclear power a reference handbook

    CERN Document Server

    Henderson, Harry R

    2014-01-01

    In the 21st century, nuclear power has been identified as a viable alternative to traditional energy sources to stem global climate change, and condemned as risky to human health and environmentally irresponsible. Do the advantages of nuclear energy outweigh the risks, especially in light of the meltdown at the Fukushima plant in 2011? This guide provides both a comprehensive overview of this critical and controversial technology, presenting reference tools that include important facts and statistics, biographical profiles, a chronology, and a glossary. It covers major controversies and proposed solutions in detail and contains contributions by experts and important stakeholders that provide invaluable perspective on the topic.

  11. Validation of psychoanalytic theories: towards a conceptualization of references.

    Science.gov (United States)

    Zachrisson, Anders; Zachrisson, Henrik Daae

    2005-10-01

    The authors discuss criteria for the validation of psychoanalytic theories and develop a heuristic and normative model of the references needed for this. Their core question in this paper is: can psychoanalytic theories be validated exclusively from within psychoanalytic theory (internal validation), or are references to sources of knowledge other than psychoanalysis also necessary (external validation)? They discuss aspects of the classic truth criteria correspondence and coherence, both from the point of view of contemporary psychoanalysis and of contemporary philosophy of science. The authors present arguments for both external and internal validation. Internal validation has to deal with the problems of subjectivity of observations and circularity of reasoning, external validation with the problem of relevance. They recommend a critical attitude towards psychoanalytic theories, which, by carefully scrutinizing weak points and invalidating observations in the theories, reduces the risk of wishful thinking. The authors conclude by sketching a heuristic model of validation. This model combines correspondence and coherence with internal and external validation into a four-leaf model for references for the process of validating psychoanalytic theories.

  12. Uranium reference materials

    International Nuclear Information System (INIS)

    Donivan, S.; Chessmore, R.

    1987-07-01

    The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

  13. International panoram and Spanish contribution to the dissemination and evaluation of reference data for the ionizing radiations: Project BANDRRI

    International Nuclear Information System (INIS)

    Los Arcos, J.M.; Gonzalez, A.; Bailador, A.; Gonzalez, A.; Sanchez, E.; Gorostiza, C.; Ortiz, F.

    1998-01-01

    The present work shows the international panorama of the diverse sources of reference data commonly used in the environment of the radiations ionizantes, as well as the organized Spanish contribution recently around the project of the database of Reference for the radiations ionizantes (BANDRRI), developed jointly by the Unit of Metrology of Ionizing Radiations (UMRI) of the center of Environmental and Technological Investigations (CIEMAT), clerk of the Ministry of Industry and Spanish Energy, the University of Education to Distance and the Address of Computer science of the CIEMAT

  14. STL pocket reference

    CERN Document Server

    Lischner, Ray

    2003-01-01

    The STL Pocket Reference describes the functions, classes, and templates in that part of the C++ standard library often referred to as the Standard Template Library (STL). The STL encompasses containers, iterators, algorithms, and function objects, which collectively represent one of the most important and widely used subsets of standard library functionality. The C++ standard library, even the subset known as the STL, is vast. It's next to impossible to work with the STL without some sort of reference at your side to remind you of template parameters, function invocations, return types--ind

  15. Regular Expression Pocket Reference

    CERN Document Server

    Stubblebine, Tony

    2007-01-01

    This handy little book offers programmers a complete overview of the syntax and semantics of regular expressions that are at the heart of every text-processing application. Ideal as a quick reference, Regular Expression Pocket Reference covers the regular expression APIs for Perl 5.8, Ruby (including some upcoming 1.9 features), Java, PHP, .NET and C#, Python, vi, JavaScript, and the PCRE regular expression libraries. This concise and easy-to-use reference puts a very powerful tool for manipulating text and data right at your fingertips. Composed of a mixture of symbols and text, regular exp

  16. CSS Pocket Reference

    CERN Document Server

    Meyer, Eric

    2011-01-01

    When you're working with CSS and need a quick answer, CSS Pocket Reference delivers. This handy, concise book provides all of the essential information you need to implement CSS on the fly. Ideal for intermediate to advanced web designers and developers, the 4th edition is revised and updated for CSS3, the latest version of the Cascading Style Sheet specification. Along with a complete alphabetical reference to CSS3 selectors and properties, you'll also find a short introduction to the key concepts of CSS. Based on Cascading Style Sheets: The Definitive Guide, this reference is an easy-to-us

  17. Biomedical Engineering Desk Reference

    CERN Document Server

    Ratner, Buddy D; Schoen, Frederick J; Lemons, Jack E; Dyro, Joseph; Martinsen, Orjan G; Kyle, Richard; Preim, Bernhard; Bartz, Dirk; Grimnes, Sverre; Vallero, Daniel; Semmlow, John; Murray, W Bosseau; Perez, Reinaldo; Bankman, Isaac; Dunn, Stanley; Ikada, Yoshito; Moghe, Prabhas V; Constantinides, Alkis

    2009-01-01

    A one-stop Desk Reference, for Biomedical Engineers involved in the ever expanding and very fast moving area; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the biomedical engineering field. Material covers a broad range of topics including: Biomechanics and Biomaterials; Tissue Engineering; and Biosignal Processing* A hard-working desk reference providing all the essential material needed by biomedical and clinical engineers on a day-to-day basis * Fundamentals, key techniques,

  18. LINQ Pocket Reference

    CERN Document Server

    Albahari, Joseph

    2008-01-01

    Ready to take advantage of LINQ with C# 3.0? This guide has the detail you need to grasp Microsoft's new querying technology, and concise explanations to help you learn it quickly. And once you begin to apply LINQ, the book serves as an on-the-job reference when you need immediate reminders. All the examples in the LINQ Pocket Reference are preloaded into LINQPad, the highly praised utility that lets you work with LINQ interactively. Created by the authors and free to download, LINQPad will not only help you learn LINQ, it will have you thinking in LINQ. This reference explains: LINQ's ke

  19. Exploring science through science fiction

    CERN Document Server

    Luokkala, Barry B

    2014-01-01

    How does Einstein’s description of space and time compare with Dr. Who? Can James Bond really escape from an armor-plated railroad car by cutting through the floor with a laser concealed in a wristwatch? What would it take to create a fully-intelligent android, such as Star Trek’s Commander Data? How might we discover intelligent civilizations on other planets in the galaxy? Is human teleportation possible? Will our technological society ever reach the point at which it becomes lawful to discriminate on the basis of genetic information, as in the movie GATTACA? Exploring Science Through Science Fiction addresses these and other interesting questions, using science fiction as a springboard for discussing fundamental science concepts and cutting-edge science research. The book is designed as a primary text for a college-level course which should appeal to students in the fine arts and humanities as well as to science and engineering students. It includes references to original research papers, landmark scie...

  20. Emotionally Intense Science Activities

    Science.gov (United States)

    King, Donna; Ritchie, Stephen; Sandhu, Maryam; Henderson, Senka

    2015-01-01

    Science activities that evoke positive emotional responses make a difference to students' emotional experience of science. In this study, we explored 8th Grade students' discrete emotions expressed during science activities in a unit on Energy. Multiple data sources including classroom videos, interviews and emotion diaries completed at the end of…

  1. Science and Science Fiction

    Science.gov (United States)

    Oravetz, David

    2005-01-01

    This article is for teachers looking for new ways to motivate students, increase science comprehension, and understanding without using the old standard expository science textbook. This author suggests reading a science fiction novel in the science classroom as a way to engage students in learning. Using science fiction literature and language…

  2. Optimal primitive reference frames

    International Nuclear Information System (INIS)

    Jennings, David

    2011-01-01

    We consider the smallest possible directional reference frames allowed and determine the best one can ever do in preserving quantum information in various scenarios. We find that for the preservation of a single spin state, two orthogonal spins are optimal primitive reference frames; and in a product state, they do approximately 22% as well as an infinite-sized classical frame. By adding a small amount of entanglement to the reference frame, this can be raised to 2(2/3) 5 =26%. Under the different criterion of entanglement preservation, a very similar optimal reference frame is found; however, this time it is for spins aligned at an optimal angle of 87 deg. In this case 24% of the negativity is preserved. The classical limit is considered numerically, and indicates under the criterion of entanglement preservation, that 90 deg. is selected out nonmonotonically, with a peak optimal angle of 96.5 deg. for L=3 spins.

  3. Reference Climatological Stations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Reference Climatological Stations (RCS) network represents the first effort by NOAA to create and maintain a nationwide network of stations located only in areas...

  4. Toxicity Reference Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Toxicity Reference Database (ToxRefDB) contains approximately 30 years and $2 billion worth of animal studies. ToxRefDB allows scientists and the interested...

  5. Collaborative networks: Reference modeling

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.

    2008-01-01

    Collaborative Networks: Reference Modeling works to establish a theoretical foundation for Collaborative Networks. Particular emphasis is put on modeling multiple facets of collaborative networks and establishing a comprehensive modeling framework that captures and structures diverse perspectives of

  6. Ozone Standard Reference Photometer

    Data.gov (United States)

    Federal Laboratory Consortium — The Standard Reference Photometer (SRP) Program began in the early 1980s as collaboration between NIST and the U.S. Environmental Protection Agency (EPA) to design,...

  7. Enterprise Reference Library

    Science.gov (United States)

    Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

    2011-01-01

    Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

  8. Women and Science: Issues and Resources [and] Women and Information Technology: A Selective Bibliography.

    Science.gov (United States)

    Searing, Susan, Comp.; Shult, Linda, Comp.

    Two bibliographies list over 120 books, journal articles, reference materials, statistical sources, organizations, and media relevant to women's roles in science and in information technology. The first bibliography emphasizes books, most of which were published in the late 1970's and the 1980's, that present a feminist critique of scientific…

  9. Citation Behavior of Undergraduate Students: A Study of History, Political Science, and Sociology Papers

    Science.gov (United States)

    Hendley, Michelle

    2012-01-01

    The goal of this analysis was to obtain local citation behavior data on undergraduates researching history, political science, and sociology papers. The study found that students cited books and journals even with the availability of web sources; however, usage varied by subject. References to specific websites' domains also varied across subject…

  10. Comparability of reference values

    International Nuclear Information System (INIS)

    Rossbach, M.; Stoeppler, M.

    1993-01-01

    Harmonization of certified values in Reference Materials (RMs) can be carried out by applying nuclear analytical techniques to RMs of various matrix types and concentration levels. Although RMs generally should not be used as primary standards the cross evaluation of concentrations in RMs leads to better compatibility of reference values and thus to a greater agreement between analytical results from different laboratories using these RMs for instrument calibration and quality assurance. (orig.)

  11. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  12. 2002 reference document

    International Nuclear Information System (INIS)

    2002-01-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  13. Open source community organization

    CSIR Research Space (South Africa)

    Molefe, Onkgopotse M

    2009-05-01

    Full Text Available Open Source communities (OSCs), sometimes referred to as virtual or online communities play a significant role in terms of the contribution they continue to make in producing user-friendly Open Source Software (OSS) solutions. Many projects have...

  14. Online Sources of Competitive Intelligence.

    Science.gov (United States)

    Wagers, Robert

    1986-01-01

    Presents an approach to using online sources of information for competitor intelligence (i.e., monitoring industry and tracking activities of competitors); identifies principal sources; and suggests some ways of making use of online databases. Types and sources of information and sources and database charts are appended. Eight references are…

  15. Benchmarking reference services: an introduction.

    Science.gov (United States)

    Marshall, J G; Buchanan, H S

    1995-01-01

    Benchmarking is based on the common sense idea that someone else, either inside or outside of libraries, has found a better way of doing certain things and that your own library's performance can be improved by finding out how others do things and adopting the best practices you find. Benchmarking is one of the tools used for achieving continuous improvement in Total Quality Management (TQM) programs. Although benchmarking can be done on an informal basis, TQM puts considerable emphasis on formal data collection and performance measurement. Used to its full potential, benchmarking can provide a common measuring stick to evaluate process performance. This article introduces the general concept of benchmarking, linking it whenever possible to reference services in health sciences libraries. Data collection instruments that have potential application in benchmarking studies are discussed and the need to develop common measurement tools to facilitate benchmarking is emphasized.

  16. Radiological Assessment Survey of the Vance road Facility Source Vault Building Materials, Oak Ridge Institute for Science and Education, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Morton, J. R.

    2000-01-01

    From the 1950s, the Vance Road laboratory was the site of extensive nuclear medical research and involved the used of numerous radionuclides. These nuclides were stored in a source vault stored on the first floor of the facility. Nuclear medical research is no longer conducted in this facility, and the source vault was remediated in preparation for converting the area to office space and general use. The Environmental Survey and Site Assessment Program (ESSAP) of ORISE performed a radiological assessment survey of the source vault and its associated miscellaneous building materials and laboratory equipment in preparation for the conversion to general use space

  17. The Museum of Science and Industry Basic List of Children's Science Books 1973-1984.

    Science.gov (United States)

    Richter, Bernice; Wenzel, Duane

    Children's science books are listed under these headings: animals; astronomy; aviation and space; biography; careers; earth sciences; encyclopedias and reference books; environment and conservation; fiction; general science; life sciences; marine life; mathematics and computer science; medical and health sciences; physics and chemistry; plant…

  18. Encyclopedia of color science and technology

    CERN Document Server

    2016-01-01

    The Encyclopedia of Color Science and Technology provides an authoritative single source for understanding and applying the concepts of color to all fields of science and technology, including artistic and historical aspects of color. Many topics are discussed in this timely reference, including an introduction to the science of color, and entries on the physics, chemistry and perception of color. Color is described as it relates to optical phenomena of color and continues on through colorants and materials used to modulate color and also to human vision of color. The measurement of color is provided as is colorimetry, color spaces, color difference metrics, color appearance models, color order systems and cognitive color. Other topics discussed include industrial color, color imaging, capturing color, displaying color and printing color. Descriptions of color encodings, color management, processing color and applications relating to color synthesis for computer graphics are included in this work. The Encyclo...

  19. Applying Landscape Science to Natural Resource Management

    Directory of Open Access Journals (Sweden)

    Guy M. Robinson

    2013-03-01

    Full Text Available This is the introduction to the Ecology and Society special feature on "Applying Landscape Science to Natural Resource Management". Primarily drawing upon examples from Australia, the nine papers in the feature illustrate how landscape science seeks to integrate information from diverse sources to generate management solutions for implementation by individual land managers, communities, and governments at different levels. This introduction refers to the genesis of the feature, briefly outlines the nature and content of landscape science, and then summarizes key features of the nine papers. These are organized into two sections: one deals with inputs from human agents in the landscape, and one with the development of models enabling different management scenarios and environmental changes to be envisaged, understood, and applied to policy development.

  20. Information systems in the field of nuclear science and technology, with special reference to Library and Information Services of BARC and its role in the development of atomic energy for peaceful purposes in India

    International Nuclear Information System (INIS)

    Kamath, V.A.

    1976-01-01

    Information systems in the field of nuclear science and technology are described. A detailed description is given of the various services and activities of : (1) the Centre for Documentation (CID) of the EURATOM and (2) The Technical Information Program of the USERDA. The objectives and operation of the International Nuclear Information Systems (INIS) established by the IAEA are discussed. The information needs in the field of nuclear science and technology in India are met by the Library and Information Services (L and IS) of the Bhabha Atomic Research Centre, Bombay. Its various library facilities, documentation and information services are described in detail. It also acts as the INIS inputting centre for Indian nuclear literature. (M.G.B.)