WorldWideScience

Sample records for scholastic press association

  1. Fish consumption, mercury exposure, and their associations with scholastic achievement in the Seychelles Child Development Study.

    Science.gov (United States)

    Davidson, Philip W; Leste, Andre; Benstrong, Egbert; Burns, Christine M; Valentin, Justin; Sloane-Reeves, Jean; Huang, Li-Shan; Miller, Wesley A; Gunzler, Douglas; van Wijngaarden, Edwin; Watson, Gene E; Zareba, Grazyna; Shamlaye, Conrad F; Myers, Gary J

    2010-09-01

    Studies of neurodevelopmental outcomes in offspring exposed to MeHg from maternal consumption of fish have primarily measured cognitive abilities. Reported associations have been subtle and in both adverse and beneficial directions. Changes in functional outcomes such as school achievement and behavior in exposed children and adolescents have not been examined. We undertook an assessment of school success of children in the Seychelles Child Development Study (SCDS) main cohort to determine if there were any associations with either prenatal or recent postnatal MeHg exposure. The primary endpoints were Seychelles nationally standardized end-of-year examinations given when the cohort children were 9 and 17 years of age. A subgroup (n=215) from the main cohort was also examined at 9 years of age using a regional achievement test called SACMEQ. Prenatal MeHg exposure was 6.8 ppm in maternal hair; recent postnatal exposure was 6.09 ppm at 9 years and 8.0 ppm at 17 years, measured in child hair. Multiple linear regression analyses showed no pattern of associations between prenatal or postnatal exposure, and either the 9- or 17-year end-of-year examination scores. For the subgroup of 215 subjects who participated in the SACMEQ test, there were significant adverse associations between examination scores and postnatal exposure, but only for males. The average postnatal exposure level in child hair for this subgroup was significantly higher than for the overall cohort. These results are consistent with our earlier studies and support the interpretation that prenatal MeHg exposure at dosages achieved by mothers consuming a diet high in fish are not associated with adverse educational measures of scholastic achievement. The adverse association of educational measures with postnatal exposure in males is intriguing, but will need to be confirmed by further studies examining factors that influence scholastic achievement. Copyright © 2010 Elsevier Inc. All rights reserved.

  2. Helping Struggling Adolescent Readers: Is Implementation of Different Components of Scholastic's READ 180 Associated with Differences in Student Achievement Gains?

    Science.gov (United States)

    Coffey, Debra J.

    2013-01-01

    This dissertation uses data from the evaluation of a Striving Readers project to examine the associations between levels of implementation of different components of Scholastic's "READ 180" and student achievement as measured on the Iowa Test of Basic Skills (ITBS) reading assessment. The approach was hierarchical linear modeling using…

  3. Fish Consumption, Mercury Exposure, and Their Associations with Scholastic Achievement in the Seychelles Child Development Study1

    Science.gov (United States)

    Davidson, Philip W.; Leste, Andre; Benstrong, Egbert; Burns, Christine M.; Valentin, Justin; Sloane-Reeves, Jean; Huang, Li-Shan; Miller, Wesley A.; Gunzler, Douglas; van Wijngaarden, Edwin; Watson, Gene E.; Zareba, Grazyna; Shamlaye, Conrad F.; Myers, Gary J.

    2010-01-01

    Studies of neurodevelopmental outcomes in offspring exposed to MeHg from maternal consumption of fish have primarily measured cognitive abilities. Reported associations have been subtle and in both adverse and beneficial directions. Changes in functional outcomes such as school achievement and behavior in exposed children and adolescents have not been examined. We undertook an assessment of school success of children in the Seychelles Child Development Study (SCDS) Main Cohort to determine if there were any associations with either prenatal or recent postnatal MeHg exposure. The primary endpoints were Seychelles nationally standardized end-of-year examinations given when the cohort children were 9 and 17 years of age. A subgroup (n = 215) from the Main Cohort was also examined at 9 years of age using a regional achievement test called SACMEQ. Prenatal MeHg exposure was 6.8 ppm in maternal hair; recent postnatal exposure was 6.09 ppm at 9 years and 8.0 ppm at 17 years, measured in child hair. Multiple linear regression analyses showed no pattern of associations between prenatal or postnatal exposure, and either the 9- or 17-year end-of-year examination scores. For the subgroup of 215 subjects who participated in the SACMEQ test, there were significant adverse associations between examination scores and postnatal exposure, but only for males. The average postnatal exposure level in child hair for this subgroup was significantly higher than for the overall cohort. These results are consistent with our earlier studies and support the interpretation that prenatal MeHg exposure at dosages achieved by mothers consuming a diet high in fish are not associated with adverse educational measures of scholastic achievement. The adverse association of educational measures with postnatal exposure in males is intriguing, but will need to be confirmed by further studies examining factors that influence scholastic achievement. PMID:20576509

  4. How Goes the Great Debate? A Study of "Censorship" and "Self-Censorship" and Their Effect on the Content of the Scholastic Press.

    Science.gov (United States)

    Dickson, Tom

    A study examined censorship and self-censorship of the high-school press. Surveys were sent in April 1992 to student newspaper editors and advisers at 1,040 randomly selected public high schools across the United States. A total of 323 editors and 270 advisers responded. Respondents were compared to each other and to those in the sample obtained…

  5. Cigarette smoking among 17–18 year old adolescents – Prevalence and association with sociodemographic, familial, sport, and scholastic factors

    Directory of Open Access Journals (Sweden)

    Kemal Idrizovic

    2015-06-01

    Full Text Available Introduction: Though adolescence is recognised as a critical period for smoking prevention, there is a lack of research focused on this issue in Kosovo. The aim of this study has been to examine the gender-specific factors of influence (predictors for smoking among adolescents in Pristina, Kosovo. Material and Methods: The study sample comprised 1002 adolescents at the age of 17–18 (366 boys, 636 girls, all of whom were in the school’s 12th grade. The predictors included sociodemographic variables, familial (i.e., parental monitoring, parents’ educational background, and sport-related factors. The Chi2 and forward stepwise logistic regression analyses with a dichotomous criterion (smoking vs. non-smoking were applied. Results: The incidence of smoking was high (31% and 40% smokers, including 7% and 12% daily smokers for girls and boys, respectively. The regression model revealed more frequent absence from school (odds ratio (OR: 1.544; 95% confidence interval (CI: 1.063–2.243, more unexcused school absences (OR: 1.360; 95% CI: 1.029–1.796, and frequent parental questioning (OR: 1.530; 95% CI: 1.020–2.295 to be significant predictors of smoking among boys. For girls, a higher risk of smoking was associated with lower scholastic achievement (OR: 1.467; 95% CI: 1.089–1.977, more frequent absence from school (OR: 1.565; 95% CI: 1.137–2.155, increased conflict with parents (OR: 1.979; 95% CI: 1.405–2.789, and a self-declared perception of less parental care (OR: 0.602; 95% CI: 0.377–0.962. Sports were not found to be strongly related to smoking. However, a high risk of daily smoking was found among boys who participated in team sports and subsequently quit. Conclusions: This study reinforces the need for gender- and culture-specific approaches to studying the factors that influence smoking among adolescents. Med Pr 2015;66(2:153–163

  6. Newton and scholastic philosophy.

    Science.gov (United States)

    Levitin, Dmitri

    2016-03-01

    This article examines Isaac Newton's engagement with scholastic natural philosophy. In doing so, it makes two major historiographical interventions. First of all, the recent claim that Newton's use of the concepts of analysis and synthesis was derived from the Aristotelian regressus tradition is challenged on the basis of bibliographical, palaeographical and intellectual evidence. Consequently, a new, contextual explanation is offered for Newton's use of these concepts. Second, it will be shown that some of Newton's most famous pronouncements - from the General Scholium appended to the second edition of the Principia (1713) and from elsewhere - are simply incomprehensible without an understanding of specific scholastic terminology and its later reception, and that this impacts in quite significant ways on how we understand Newton's natural philosophy more generally. Contrary to the recent historiographical near-consensus, Newton did not hold an elaborate metaphysics, and his seemingly 'metaphysical' statements were in fact anti-scholastic polemical salvoes. The whole investigation will permit us a brief reconsideration of the relationship between the self-proclaimed 'new' natural philosophy and its scholastic predecessors.

  7. Scholastic performance and functional connectivity of brain networks in children.

    Directory of Open Access Journals (Sweden)

    Laura Chaddock-Heyman

    Full Text Available One of the keys to understanding scholastic success is to determine the neural processes involved in school performance. The present study is the first to use a whole-brain connectivity approach to explore whether functional connectivity of resting state brain networks is associated with scholastic performance in seventy-four 7- to 9-year-old children. We demonstrate that children with higher scholastic performance across reading, math and language have more integrated and interconnected resting state networks, specifically the default mode network, salience network, and frontoparietal network. To add specificity, core regions of the dorsal attention and visual networks did not relate to scholastic performance. The results extend the cognitive role of brain networks in children as well as suggest the importance of network connectivity in scholastic success.

  8. Distal clavicular osteolysis in adults: association with bench pressing intensity

    International Nuclear Information System (INIS)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.

    2016-01-01

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  9. Distal clavicular osteolysis in adults: association with bench pressing intensity

    Energy Technology Data Exchange (ETDEWEB)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)

    2016-11-15

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  10. Prevalence and Factors Associated with Substance Use and Misuse among Kosovar Adolescents; Cross Sectional Study of Scholastic, Familial-, and Sports-Related Factors of Influence.

    Science.gov (United States)

    Tahiraj, Enver; Cubela, Mladen; Ostojic, Ljerka; Rodek, Jelena; Zenic, Natasa; Sekulic, Damir; Lesnik, Blaz

    2016-05-16

    Adolescence is considered to be the most important period for the prevention of substance use and misuse (SUM). The aim of this study was to investigate the problem of SUM and to establish potentially important factors associated with SUM in Kosovar adolescents. Multi-stage simple random sampling was used to select participants. At the end of their high school education, 980 adolescents (623 females) ages 17 to 19 years old were enrolled in the study. The prevalence of smoking, alcohol consumption (measured by Alcohol Use Disorder Identification Test-AUDIT), and illegal drug use (dependent variables), as well as socio-demographic, scholastic, familial, and sports-related factors (independent variables), were assessed. Boys smoke cigarettes more often than girls with daily-smoking prevalence of 16% among boys and 9% among girls (OR = 1.85, 95% = CI 1.25-2.75). The prevalence of harmful drinking (i.e., AUDIT scores of >10) is found to be alarming (41% and 37% for boys and girls, respectively; OR = 1.13, 95% CI = 0.87-1.48), while 17% of boys and 9% of girls used illegal drugs (OR = 2.01, 95% CI = 1.35-2.95). The behavioral grade (observed as: excellent-average-poor) is the factor that was most significantly correlated with SUM both in boys and girls, with lower behavioral grades among those adolescents who consume substances. In girls, lower maternal education levels were associated with a decreased likelihood of SUM, whereas sports achievement was negatively associated with risky drinking. In boys, sports achievement decreased the likelihood of daily smoking. Information on the factors associated with SUM should be disseminated among sports and school authorities.

  11. Prevalence and Factors Associated with Substance Use and Misuse among Kosovar Adolescents; Cross Sectional Study of Scholastic, Familial-, and Sports-Related Factors of Influence

    Directory of Open Access Journals (Sweden)

    Enver Tahiraj

    2016-05-01

    Full Text Available Adolescence is considered to be the most important period for the prevention of substance use and misuse (SUM. The aim of this study was to investigate the problem of SUM and to establish potentially important factors associated with SUM in Kosovar adolescents. Multi-stage simple random sampling was used to select participants. At the end of their high school education, 980 adolescents (623 females ages 17 to 19 years old were enrolled in the study. The prevalence of smoking, alcohol consumption (measured by Alcohol Use Disorder Identification Test–AUDIT, and illegal drug use (dependent variables, as well as socio-demographic, scholastic, familial, and sports-related factors (independent variables, were assessed. Boys smoke cigarettes more often than girls with daily-smoking prevalence of 16% among boys and 9% among girls (OR = 1.85, 95% = CI 1.25–2.75. The prevalence of harmful drinking (i.e., AUDIT scores of >10 is found to be alarming (41% and 37% for boys and girls, respectively; OR = 1.13, 95% CI = 0.87–1.48, while 17% of boys and 9% of girls used illegal drugs (OR = 2.01, 95% CI = 1.35–2.95. The behavioral grade (observed as: excellent–average-poor is the factor that was most significantly correlated with SUM both in boys and girls, with lower behavioral grades among those adolescents who consume substances. In girls, lower maternal education levels were associated with a decreased likelihood of SUM, whereas sports achievement was negatively associated with risky drinking. In boys, sports achievement decreased the likelihood of daily smoking. Information on the factors associated with SUM should be disseminated among sports and school authorities.

  12. Do inattention and hyperactivity symptoms equal scholastic impairment? Evidence from three European cohorts

    DEFF Research Database (Denmark)

    Rodriguez, Alina; Järvelin, Marjo-Riitta; Obel, Carsten

    2007-01-01

    BACKGROUND: Attention Deficit/Hyperactivity Disorder (ADHD) affects many children, adolescents, and adults and is associated with a number of impairments. Poor academic performance is related to ADHD in clinical samples. However, it is unclear to what extent core ADHD symptoms and scholastic...... children on inattention and hyperactivity symptoms and reported children's scholastic performance on basic skills. RESULTS: There was a significant association in all cohorts between core ADHD symptoms and scholastic impairment in reading, writing, and mathematics. Particularly, inattention was related...... to a two to tenfold increase in scholastic impairment. Prevalence of hyperactivity symptoms was similar across the three cohorts, but inattention was lowest among children from the Finnish cohort, after stratification on living conditions. CONCLUSION: These results extend previous reports of scholastic...

  13. Mapping the Territory: A Conceptual Model of Scholastic Journalism.

    Science.gov (United States)

    Arnold, Mary

    Intended to provide a comprehensive conceptual framework to serve as a scaffold for past, present, and future research on "scholastic journalism" (journalism in the secondary school), a topical content analysis of the Association for Education in Journalism and Mass Communication (AEJMC) Secondary Education Division research, teaching,…

  14. Pronouncements and Denunciations: An Analysis of State Press Association Ethics Codes from the 1920s.

    Science.gov (United States)

    Cronin, Mary M.; McPherson, James B.

    1995-01-01

    Discusses how four situational concerns (the rise of press agents, the fallout from World War I propaganda, sensationalism's resurgence, and editorial independence) contributed to a noticeable decline of the public's trust in the press. Shows how, as a result, 12 state press association ethics codes from the 1920s consistently emphasized the…

  15. Public Relations Strategies for Scholastic Publication Staffs.

    Science.gov (United States)

    Konkle, Bruce E.

    2000-01-01

    Discusses the importance to scholastic publications staffs of four public relations strategies: meticulous research, systematic planning, strengthening communication efforts, and evaluation. Notes internal and external factors crucial to good public relations. Lists activities to consider. (SR)

  16. Do inattention and hyperactivity symptoms equal scholastic impairment? evidence from three European cohorts

    Directory of Open Access Journals (Sweden)

    Henriksen Tine

    2007-11-01

    Full Text Available Abstract Background Attention Deficit/Hyperactivity Disorder (ADHD affects many children, adolescents, and adults and is associated with a number of impairments. Poor academic performance is related to ADHD in clinical samples. However, it is unclear to what extent core ADHD symptoms and scholastic impairment are related in non-referred school-aged children. Methods Data come from three population-based cohorts from Sweden, Denmark, and Finland, which are part of the Nordic Network on ADHD. The combined sample size was 13,087 children who were studied at ages 7–8 or 10–12 years. Teachers rated children on inattention and hyperactivity symptoms and reported children's scholastic performance on basic skills. Results There was a significant association in all cohorts between core ADHD symptoms and scholastic impairment in reading, writing, and mathematics. Particularly, inattention was related to a two to tenfold increase in scholastic impairment. Prevalence of hyperactivity symptoms was similar across the three cohorts, but inattention was lowest among children from the Finnish cohort, after stratification on living conditions. Conclusion These results extend previous reports of scholastic impairment among children with clinically diagnosed ADHD to non-referred population samples from three European countries. Surveillance policies should be implemented in school systems to catch children in need of behavioral or scholastic support early.

  17. Influence of medical journal press releases on the quality of associated newspaper coverage: retrospective cohort study.

    Science.gov (United States)

    Schwartz, Lisa M; Woloshin, Steven; Andrews, Alice; Stukel, Therese A

    2012-01-27

    To determine whether the quality of press releases issued by medical journals can influence the quality of associated newspaper stories. Retrospective cohort study of medical journal press releases and associated news stories. We reviewed consecutive issues (going backwards from January 2009) of five major medical journals (Annals of Internal Medicine, BMJ, Journal of the National Cancer Institute, JAMA, and New England Journal of Medicine) to identify the first 100 original research articles with quantifiable outcomes and that had generated any newspaper coverage (unique stories ≥100 words long). We identified 759 associated newspaper stories using Lexis Nexis and Factiva searches, and 68 journal press releases using Eurekalert and journal website searches. Two independent research assistants assessed the quality of journal articles, press releases, and a stratified random sample of associated newspaper stories (n=343) by using a structured coding scheme for the presence of specific quality measures: basic study facts, quantification of the main result, harms, and limitations. Proportion of newspaper stories with specific quality measures (adjusted for whether the quality measure was present in the journal article's abstract or editor note). We recorded a median of three newspaper stories per journal article (range 1-72). Of 343 stories analysed, 71% reported on articles for which medical journals had issued press releases. 9% of stories quantified the main result with absolute risks when this information was not in the press release, 53% did so when it was in the press release (relative risk 6.0, 95% confidence interval 2.3 to 15.4), and 20% when no press release was issued (2.2, 0.83 to 6.1). 133 (39%) stories reported on research describing beneficial interventions. 24% mentioned harms (or specifically declared no harms) when harms were not mentioned in the press release, 68% when mentioned in the press release (2.8, 1.1 to 7.4), and 36% when no press release

  18. The Marginal Majority: Women War Correspondents in the Salvadoran Press Corps Association (SPCA).

    Science.gov (United States)

    Pedelty, Mark

    1997-01-01

    Finds that men in the Salvadoran Press Corps Association used Hemingwayesque myths and ritual performances which dominated corps culture to escape the discipline of corporate press institutions, while women correspondents experienced the rituals as an obstacle to individual and collective attempts to negotiate or reform the field. Analyses gender…

  19. Factors affecting scholastic performances of adolescents.

    Science.gov (United States)

    Shashidhar, Saraswati; Rao, Chandrika; Hegde, Radhakrishna

    2009-05-01

    The present study aims at recognizing the social influence, study habits and health factors affecting scholastic performances of adolescents and to compare these factors among the adolescents between two categories of school. A total of 1230 adolescents (13-18 yrs) were screened. Data was collected by personal interview, using the teenage screening questionnaire, Trivandrum, between May 2004 and November 2005. A total 615 students from corporation and private schools were studied. 39.76% (489) were high achievers, 13.5% (166) were low achievers with p poor study habits and social factors were increased in low achievers of corporation schools. On multivariate analysis, the predictor variables for poor scholastic performance were adolescent having refractory error, not having help for study at home, not doing home work regularly, not solving question bank papers and reading only before examinations. It is feasible and worthwhile to identify the determinants of scholastic performance and plan intervention strategies at each school. The results of this study highlight the importance of implementing newer strategies, focusing on strict study patterns and creating the conducive school and home environment for study, so as to achieve better scholastic performances.

  20. Finite element modelling and associated experimentations to optimize and predict the pressing cycle of a future AMBB manufacturing press

    International Nuclear Information System (INIS)

    Bayle, J.P.; Mezeix, P.; Tronche, E.; Delette, G.; Remy, E.; Picart, S.

    2014-01-01

    This study presents an approach based on the use of pellet forming numerical digital simulation which enables optimization of the die pressing cycle. Semi-empirical mechanical models were used in an FEM code, CAST3M. Specific powder characterizations were also performed to supply the mechanical parameters of compaction model. The methodology for the identification of five main coefficients (index flow, elastic and plastic parameters) was used with two different powders. The results show that the axial distribution of frictional forces may be changed during die pressing by a modification of the sequence of punch displacements. According to these results and the literature, the pressing cycle can be considered to have an influence on the shape of a sintered pellet through the axial distribution of green density. The process used for the identification of the Cam-Clay model coefficients seems to be in good agreement, even if the changes in certain parameters remain rather unclear and will require follow-up studies to confirm some of the results. The experimental device used produces good quality pellets, and the Radial Open Die Modulus remains the first choice for reduced pellet damage. Much work still remains to be done to fully define the identification process and create the most representative simulations possible before launching an industrial version of a nuclearized press, planned for the last quarter of year 2014. (authors)

  1. Maternal Child-Rearing Patterns and Children's Scholastic Achievement in Different Groups.

    Science.gov (United States)

    Logan, Richard D.

    The purpose of this study was to examine the general proposition that different maternal child-rearing pattern-types (permissive or restrictive) are associated with high scholastic achievement in elementary school children from four different class-culture groupings (black middle-class, black working-class, white middle-class, and white…

  2. Geheime Fotos. Die Kooperation von Associated Press und NS-Regime (1942–1945

    Directory of Open Access Journals (Sweden)

    Norman Domeier

    2017-08-01

    Full Text Available This article is based on a new archival find from the papers of foreign correspondent Louis P. Lochner. It proves the existence of a secret German-American cooperation between Associated Press (AP and the ›Bureau Laux‹, an agency of the SS and the German Foreign Office, during the war years 1942–1945. With the permission of the Roosevelt administration, AP and the Bureau Laux exchanged photos via diplomatic pouch on a daily basis until spring 1945, first via Lisbon and from 1944 via Stockholm as well. Approximately 40,000 photos were swapped in this way between the war enemies while the battles of the Second World War were fought and the Holocaust was taking place. In Berlin, the AP photos were presented daily to the highest Nazi leadership. They were then also used for anti-American and anti-Semitic propaganda in the German press. Conversely, thousands of Nazi photos received by AP New York via Lisbon and Stockholm were printed in the American and international press. This article sheds new light on both AP as a news and picture agency and on foreign reporting during the Nazi era and the Second World War. * * * Der im vorliegenden Aufsatz präsentierte Quellenfund aus dem Nachlass des Auslandskorrespondenten Louis P. Lochner belegt eine geheime deutsch-amerikanische Kooperation zwischen Associated Press (AP und dem »Büro Laux«, einer Agentur von SS und Auswärtigem Amt, während der Kriegsjahre 1942–1945. Mit Genehmigung der Roosevelt-Administration tauschten AP und Büro Laux bis zum Frühjahr 1945 täglich per Diplomatenpost Fotomaterial aus – zunächst via Lissabon, ab 1944 auch via Stockholm. Schätzungsweise 40.000 Fotos wurden so zwischen den Feinden übermittelt, während die Schlachten des Zweiten Weltkrieges geschlagen wurden und der Holocaust stattfand. In Berlin war das AP-Fotomaterial für die oberste Führung des NS-Regimes bestimmt; zudem wurde es für antiamerikanische und antisemitische Propaganda in der NS-Presse

  3. Control of Movement: Press and Civic Associations in Zacatecas, Mexico, 1821-1845

    Directory of Open Access Journals (Sweden)

    Rosalina Ríos Zúñiga

    2002-07-01

    Full Text Available This essay explores the  development of press and civic associations in Zacatecas during the years 1821 to 1845. Both vehicles had a strong link and helped to emerge local public spaces. After an open and dynamic beginning, in which they helped to expand republican political culture, and also created expectations among  lower classes to  citizenship, they  were closed down  by elites.  This  closing happened  principally as an  elite reaction against the popular revolt that occurred in Sombrerete at the beginning of 1829, and it lasted until 1845.

  4. Identifying Sources of Funding That Contribute to Scholastic Productivity in Academic Plastic Surgeons.

    Science.gov (United States)

    Ruan, Qing Zhao; Cohen, Justin B; Baek, Yoonji; Chen, Austin D; Doval, Andres F; Singhal, Dhruv; Fukudome, Eugene Y; Lin, Samuel J; Lee, Bernard T

    2018-04-01

    Scholastic productivity has previously been shown to be positively associated with National Institute of Health (NIH) grants and industry funding. This study examines whether society, industry, or federal funding contributes toward academic productivity as measured by scholastic output of academic plastic surgeons. Institution Web sites were used to acquire academic attributes of full-time academic plastic surgeons. The Center for Medicare and Medicaid Services Open Payment database, NIH reporter, the Plastic Surgery Foundation (PSF), and American Association of Plastic Surgeons (AAPS) Web sites were accessed for funding and endowment details. Bibliometric data of each surgeon were then collected via Scopus to ascertain strengths of association with each source. Multiple linear regression analysis was used to identify significant contributors to high scholastic output. We identified 935 academic plastic surgeons with 94 (10.1%), 24 (2.6%), 724 (77.4%), and 62 (6.6%) receiving funding from PSF, AAPS, industry, and NIH, respectively. There were positive correlations in receiving NIH, PSF, and/or AAPS funding (P funding was found to negatively associate with PSF (r = -0.75, P = 0.022) grants. The NIH R award was consistently found to be the most predictive of academic output across bibliometrics, followed by the AAPS academic scholarship award. Conventional measures of academic seniority remained predictive across all measures used. Our study demonstrates for the first time interactions between industry, federal, and association funding. The NIH R award was the strongest determinant of high scholastic productivity. Recognition through AAPS academic scholarships seemed to associate with subsequent success in NIH funding.

  5. ANXIETY AND SCHOLASTIC ACHIEVEMENT OF MOROCCAN EFL COLLEGE LEARNERS

    Directory of Open Access Journals (Sweden)

    Akhajam Saad Eddine

    2016-05-01

    Full Text Available The main purpose of this study is to investigate the relationship between anxiety and scholastic achievement among students of English department at the faculty of Arts and Humanities of Meknes, Morocco. This study focuses on the level of anxiety among English department students and how they can reduce anxiety inside and outside the classroom in a foreign language speaking environment without instructors‟ intervention. This quantitative research used two instruments; Cattle‟s anxiety questionnaire to test the level of anxiety and achievement test to measure their scholastic achievement. The results revealed that girls are more anxious than boys, boys achieve higher marks in scholastic achievement, and there is no relationship between anxiety and scholastic achievement.

  6. Internet and free press are associated with reduced lags in global outbreak reporting.

    Science.gov (United States)

    McAlarnen, Lindsey; Smith, Katherine; Brownstein, John S; Jerde, Christopher

    2014-10-30

    Global outbreak detection and reporting have generally improved for a variety of infectious diseases and geographic regions in recent decades. Nevertheless, lags in outbreak reporting remain a threat to the global human health and economy. In the time between first occurrence of a novel disease incident and public notification of an outbreak, infected individuals have a greater possibility of traveling and spreading the pathogen to other nations. Shortening outbreak reporting lags has the potential to improve global health by preventing local outbreaks from escalating into global epidemics. Reporting lags between the first record and the first public report of an event were calculated for 318 outbreaks occurring 1996-2009. The influence of freedom of the press, Internet usage, per capita health expenditure, and cell phone subscriptions, on the timeliness of outbreak reporting was evaluated. Freer presses and increasing Internet usage correlate with reduced time between the first record of an outbreak and the public report. Increasing Internet usage reduced the expected reporting lag from more than one month in nations without Internet users to one day in those where 75 of 100 people use the Internet. Advances in technology and the emergence of more open and free governments are associated with to improved global infectious disease surveillance.

  7. Association Between Maximal Bench Press Strength and Isometric Handgrip Strength Among Breast Cancer Survivors.

    Science.gov (United States)

    Rogers, Benjamin H; Brown, Justin C; Gater, David R; Schmitz, Kathryn H

    2017-02-01

    To characterize the relationship between 1-repetition maximum (1-RM) bench press strength and isometric handgrip strength among breast cancer survivors. Cross-sectional study. Laboratory. Community-dwelling breast cancer survivors (N=295). Not applicable. 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer, with 3 maximal contractions of the left and right hands. All measures were conducted by staff with training in clinical exercise testing. Among 295 breast cancer survivors, 1-RM bench press strength was 18.2±6.1kg (range, 2.2-43.0kg), and isometric handgrip strength was 23.5±5.8kg (range, 9.0-43.0kg). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7kg (95% limits of agreement, -8.2 to 17.6kg). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=.31; Pstrength (R 2 =.23). Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among breast cancer survivors. 1-RM bench press strength and isometric handgrip strength quantify distinct components of muscular strength. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  8. The Association between Maximal Bench Press Strength and Isometric Handgrip Strength among Breast Cancer Survivors

    Science.gov (United States)

    Rogers, Benjamin H.; Brown, Justin C.; Gater, David R.; Schmitz, Kathryn H.

    2016-01-01

    Objective One-repetition maximum (1-RM) bench press strength is considered the gold standard to quantify upper-body muscular strength. Isometric handgrip strength is frequently used as a surrogate for 1-RM bench press strength among breast cancer (BrCa) survivors. The relationship between 1-RM bench press strength and isometric handgrip strength, however, has not been characterized among BrCa survivors. Design Cross-sectional study. Setting Laboratory. Participants Community-dwelling BrCa survivors. Interventions Not applicable. Main Outcome Measure 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer with three maximal contractions of left and right hands. All measures were conducted by staff with training in clinical exercise testing. Results Among 295 BrCa survivors, 1-RM bench press strength was 18.2±6.1 kg (range: 2.2-43.0) and isometric handgrip strength was 23.5±5.8 kg (range: 9.0-43.0). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=0.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7 kg (95% limits of agreement: −8.2 to 17.6). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=0.31; Pstrength (R2=0.23). Conclusions Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among BrCa survivors. 1-RM bench press and isometric handgrip strength quantify distinct components of muscular strength. PMID:27543047

  9. Responsibility: The Key to Scholastic Journalism.

    Science.gov (United States)

    Bowen, John

    1988-01-01

    To behave responsibly toward school journalism, personnel officers and administrators must select a qualified, fully cognizant adviser/instructor with training in press law and ethics, journalism advising and instruction, news reporting, copy editing, and design and layout principles. A professionally oriented curriculum is also a must. (MLH)

  10. Parenting Environment and Scholastic Achievement during Adolescence: A Retrospective Study.

    Science.gov (United States)

    Taris, Toon W.; Bok, Inge A.

    1996-01-01

    This study examined the effects of perceived parenting style (overly protective versus a warm and loving environment) on the scholastic achievement of 986 Dutch adults age 18-30 years. Retrospective and longitudinal data suggested that respondents with overprotective parents drop out more frequently and have a lower level of educational attainment…

  11. Meeting the Pepsi Challenge: Preparing Evaluation Programs for Scholastic Improvement.

    Science.gov (United States)

    Hopkins, Mona S.

    This document provides guidelines for preparing evaluation programs for scholastic improvement. The philosophy underlying assessment and accountability is discussed, with specific reference to the positive and negative aspects of assessment. The design of a curriculum evaluation model is presented, including goal identification, data gathering,…

  12. Scholastic Journalism Unites Brazilian, U.S. Cultures.

    Science.gov (United States)

    Malcolm, Deb Buttleman

    2000-01-01

    Describes, from the viewpoint of a high school teacher and a student, a scholastic journalism exchange program and a three-week visit of 12 Brazilian students to the journalism department at Davenport High School. Intends to establish connections and break down stereotypes of each other. Describes how the program came about and the journalism…

  13. Scholastic Success: Fluid Intelligence, Personality, and Emotional Intelligence

    Science.gov (United States)

    Downey, Luke A.; Lomas, Justine; Billings, Clare; Hansen, Karen; Stough, Con

    2014-01-01

    The aim of the current study was to examine the role of fluid intelligence, personality traits, and emotional intelligence (EI) in predicting female Year 9 students' grade point average (GPA) and to determine whether any differences in scholastic performance were related to differences in EI or Personality. Two-hundred and forty-three female…

  14. Semantic paradox. A comparative analysis of scholastic and analytic views

    Czech Academy of Sciences Publication Activity Database

    Hanke, Miroslav

    2014-01-01

    Roč. 91, č. 3 (2014), s. 367-386 ISSN 2168-9105 R&D Projects: GA ČR(CZ) GP13-08389P Institutional support: RVO:67985955 Keywords : semantic paradoxes * scholastic logic * groundlessness * circularity * semantic pathology * two-line puzzles Subject RIV: AA - Philosophy ; Religion

  15. Children and video games: addiction, engagement, and scholastic achievement.

    Science.gov (United States)

    Skoric, Marko M; Teo, Linda Lay Ching; Neo, Rachel Lijie

    2009-10-01

    The aim of this study is to assess the relationship between video gaming habits and elementary school students' academic performance. More specifically, we seek to examine the usefulness of a distinction between addiction and high engagement and assess the predictive validity of these concepts in the context of scholastic achievement. Three hundred thirty-three children ages 8 to 12 years from two primary schools in Singapore were selected to participate in this study. A survey utilizing Danforth's Engagement-Addiction (II) scale and questions from DSM-IV was used to collect information from the schoolchildren, while their grades were obtained directly from their teachers. The findings indicate that addiction tendencies are consistently negatively related to scholastic performance, while no such relationship is found for either time spent playing games or for video game engagement. The implications of these findings are discussed.

  16. Scholastic Ability vs. Family Background in Educational Success

    DEFF Research Database (Denmark)

    McIntosh, James; D. Munk, Martin

    This research examines the role of scholastic ability and family background variables in the determination of educational attainment in Denmark. A categorical representation of the highest level of education attained by the individual is the dependent variable. It is analyzed by procedures which...... take account of the presence of unobservable factors. Parent's education and occupation along with an indicator of scholastic ability which is represented by a set of aptitude tests explain a small but significant portion of the variation in their children's educational success. Women are shown...... to respond differently to their environments than men and including these test scores does not remove the need to deal with unmeasured attributes. On the basis of the available data, family background variables as a group contribute more to the explained variation in the data than the test scores. Finally...

  17. Plotting a Course to Spark Scholastic Journalism Research.

    Science.gov (United States)

    Peterson, Jane Willoughby

    1991-01-01

    Discusses a survey of members of the Secondary Education Division of the Association for Education in Journalism and Mass Communication. Explains that respondents ranked certification and preparation of journalism teachers and advisers and the legal and ethical issues of the student press as the most important research topics. (SG)

  18. The Duration of Paid Parental Leave and Children's Scholastic Performance

    OpenAIRE

    Liu, Qian; Nordström Skans, Oskar

    2009-01-01

    We study how the duration of paid parental leave affects the accumulation of cognitive skills among children. We use a reform which extended parental leave benefits from 12 to 15 months for Swedish children born after August 1988 to evaluate the effects of prolonged parental leave on children's test scores and grades at age 16. We show that, on average, the reform had no effect on children's scholastic performance. However, we do find positive effects for children of well-educated mothers, a ...

  19. Attention Problems, Phonological Short-Term Memory, and Visuospatial Short-Term Memory: Differential Effects on Near- and Long-Term Scholastic Achievement

    Science.gov (United States)

    Sarver, Dustin E.; Rapport, Mark D.; Kofler, Michael J.; Scanlan, Sean W.; Raiker, Joseph S.; Altro, Thomas A.; Bolden, Jennifer

    2012-01-01

    The current study examined individual differences in children's phonological and visuospatial short-term memory as potential mediators of the relationship among attention problems and near- and long-term scholastic achievement. Nested structural equation models revealed that teacher-reported attention problems were associated negatively with…

  20. Comprehension of atypical literary text and scholastic achievement

    Directory of Open Access Journals (Sweden)

    Božin Aurel A.

    2009-01-01

    Full Text Available With the aim of gaining insight into literary text comprehension and the linkage between that comprehension and scholastic achievement during the first years of schooling, a research was conducted on the sample of 152 third and fourth grade pupils from one urban and one rural school. After having read silently a selected atypical excerpt from one literary text, interviewed pupils filled out the questionnaire constructed for the purposes of this research starting from the 11 categories of text comprehension singled out based on the theory of comprehension and interpretation of literary text and the current curriculum. In the first part of the research we applied the Children's orientation scale by Malka Margalit, and school marks were used as a measurement of scholastic achievement. Research results point out that, among other things, inferring on the basis of what has been read poses the greatest difficulty for third and fourth graders, that is, that almost three quarters of them are not capable of determining the meaning of some representative sentences from that text. In the positive sense, it was established that almost three quarters of them perceive beautiful poetic expressions and about 80% of them can at least to a certain extent recognize character descriptions, emotional situations and moods, that is, discover significant facts. Answers to the questions regarding the majority of categories of text comprehension are significantly correlated with scholastic achievement. As expected, the highest correlations between the measures on text comprehension categories are with the marks in native (Serbian language. Partial correlations between the measures on certain categories of text comprehension and measurements of scholastic achievement (excluding the influence of feeling of coherence are not significantly different from bivariate. Based on the obtained data, authors conclude that the utilized system of categories can be a useful tool for

  1. Physician Gender Is Associated with Press Ganey Patient Satisfaction Scores in Outpatient Gynecology.

    Science.gov (United States)

    Rogo-Gupta, Lisa J; Haunschild, Carolyn; Altamirano, Jonathan; Maldonado, Yvonne A; Fassiotto, Magali

    Patient satisfaction is gaining increasing attention as a quality measure in health care, but the methods used to assess it may negatively impact women physicians. Our objective was to examine the relationship between physician gender and patient satisfaction with outpatient gynecology care as measured by the Press Ganey patient satisfaction survey. This cross-sectional study analyzed 909 Press Ganey patient satisfaction surveys linked to outpatient gynecology visits at a single academic institution (March 2013-August 2014), including self-reported demographics and satisfaction. Surveys are delivered in a standardized fashion electronically and by mail. Surveys were completed by 821 unique patients and 13,780 gynecology visits occurred during the study period. The primary outcome variable was likelihood to recommend (LTR) a physician. We used χ 2 tests of independence to assess the effect of demographic concordance on LTR and two generalized estimating equations models were run clustered by physician, with topbox physician LTR as the outcome variable. Analysis was performed in SAS Enterprise Guide 7.1 (SAS, Inc., Cary, NC). Nine hundred nine surveys with complete demographic data were completed by women during the study period (mean age, 49.3 years). Age- and race-concordant patient-physician pairs received significantly higher proportions of top LTR score than discordant pairs (p = .014 and p < .0001, respectively). In contrast, gender-concordant pairs received a significantly lower proportion of top scores than discordant pairs (p = .027). In the generalized estimating equations model adjusting for health care environment, only gender remained statistically significant. Women physicians had significantly lower odds (47%) of receiving a top score (odds ratio, 0.53; 95% CI, 0.37-0.78; p = .001). Women gynecologists are 47% less likely to receive top patient satisfaction scores compared with their male counterparts owing to their gender alone, suggesting

  2. The Scholastic Fallacy, Habitus, and Symbolic Violence: Pierre Bourdieu and the Prospects of Ideology Criticism

    Science.gov (United States)

    Aune, James Arnt

    2011-01-01

    The scholastic fallacy consists above all in injecting "meta-" into discourses and practices. In addition to confusing research with politics, a specific way in which the scholastic fallacy can impair one's research is a tendency to divorce the mind from the body, with the latter seen as inferior. One competitor with ideology criticism, close…

  3. Press, Radio, and TV Tips for Education Associations. PR Bookshelf No. 9.

    Science.gov (United States)

    National Education Association, Washington, DC.

    This booklet contains suggestions and techniques aimed at those individuals in education associations who are in charge of news media relations for their organizations. The following aspects of reporting news to the media are discussed: getting organized and acquainted, thinking like a newsperson, writing clearly and simply, typing the news…

  4. Prevalence of scholastic backwardness among five to eight year old children.

    Science.gov (United States)

    Shenoy, J; Kapur, M

    1996-10-01

    The present paper reports the findings of a study of scholastic backwardness among five to eight year old school going children. 1535 children were screened by their class teachers, of which 10.23% were found to have scholastic backwardness. No gender differences were noticed. The rates of specific difficulties such as reading, writing and arithmetic were found to be 4.69%, 5.15% and 15.96% respectively. About 26% of the scholastically backward children were also found to have psychological disturbance. In addition, they most often came from families which could not afford basic amenities, had fathers with alcohol dependence, inconsistent disciplining and poor parental interaction. They also had more frequent school changes, tution attendence and fewer hobbies compared to the scholastically superior children.

  5. Press Start

    Science.gov (United States)

    Harteveld, Casper

    This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

  6. Measuring Scholastic Production by Dermatopathologists Using the H-Index: A Cross-Sectional Study.

    Science.gov (United States)

    Fraga, Garth R

    2018-06-01

    Academic advancement in dermatopathology requires evidence of scientific production. The H-index is a useful bibliometric for measuring scientific production because it weights both volume and impact of an individual's scholastic production. The H-index distribution among academic dermatopathologists is unknown. In this cross-sectional study of 299 dermatopathologists with academic appointments in North America, H-index, publication counts, and citation counts were retrieved from Thomas Reuters Web of Science. Analytic statistics were performed to identify best predictors of academic rank and cutoff points between academic ranks. The H-index was a superior predictor of overall academic rank than publication or citation counts. The median H-index for assistant, associate, and full professors was 4, 6, and 11, respectively. H-index cutoff scores of 8 and 10 favored associate and full professor rank, respectively. These data provide benchmarks for dermatopathologists to gauge their scientific productivity against that of their peers. Although advancement decisions will depend on a careful examination of the scope and impact of a candidate's work, assistant professors of dermatopathology with H-index scores of >7 and associate professors of dermatopathology with H-index scores of >9 may wish to consider application for promotion.

  7. Cross-country Association of Press Freedom and LGBT freedom with prevalence of persons living with HIV: implication for global strategy against HIV/AIDS.

    Science.gov (United States)

    Chen, Xinguang; Elliott, Amy L; Wang, Shuang

    2018-01-01

    Human behaviors are affected by attitudes and beliefs, which in turn are shaped by higher-level values to which we have ascribed. In this study, we explore the relationship between two higher-level values, press freedom and LGBT freedom, and HIV infection with national data at the population level. Data were the number of persons living with HIV (PLWH, n  = 35,468,911) for 148 countries during 2011-15, press freedom index (PFI) determined by the Reporters Without Borders, and LGBT freedom index (LGBT-FI) based on laws regulating same-sex relationships and expression. PLWH prevalence (1/1000), PFI and LGBT-FI were mapped first. Multiple regression was thus used to associate the logarithm of PLWH prevalence with PFI, LGBT-FI and PFI × LGBT-FI interaction, controlling for per capita GDP and weighted by population size. Global prevalence of PLWH during 2011-15 was 0.51 per 1000 population. The prevalence showed a geographic pattern moving from high at the south and west ends of the world map to low at the north and east. Both PFI and LGBT-FI were positively associated with PLWH prevalence with a negative interaction between the two. More people are infected with HIV in countries with higher press freedom and higher LGBT freedom. Furthermore, press freedom can attenuate the positive association between levels of LGBT freedom and risk of HIV infection. This study demonstrated the urgency for and provided data supporting further research to investigate potential cultural and socioecological mechanisms underpinning the complex relationship among press freedom, LGBT freedom and HIV infection, with data collected at the individual level.

  8. [Effects of reading difficulties on scholastic self-evaluation and mental health in elementary school children].

    Science.gov (United States)

    Yamashita, Toshiya; Hayashi, Takashi

    2014-05-01

    We aimed to examine the effects of reading difficulties on scholastic self-evaluation and mental health in elementary school students. Following guidelines for diagnosing reading disorders in elementary school students, we administered reading test batteries consisting of single sounds, single words, and single sentences to 41 fifth-grade elementary school students in Japan. The students' levels of scholastic self-evaluation, self-esteem, and depressive symptoms were assessed using self-rating questionnaires. By evaluating students' reading speed and the number of reading errors they made, we found that six students (14.6%) had reading difficulties (RD group) as per the guidelines for diagnosing reading disorders. The scholastic self-evaluation scores of this RD group were significantly lower than that of the non-RD group. No significant differences were found between the groups on self-esteem or depressive symptoms scores, which we considered to be indicators of mental health, Speed in reading single sounds and single words, and the number of reading errors in reading single sounds had significant negative correlations with scholastic self-evaluation scores. We found that reading difficulties might result in decreased scholastic self-evaluation in elementary school students; however, reading difficulties did not directly influence self-esteem or depression.

  9. Press release

    CERN Multimedia

    Association du personnel

    2006-01-01

    Geneva, 26 April 2006 – In the framework of the current five-yearly review, the CERN Staff Association denounces a serious attack on employment conditions. Indeed, the Management of the Organization has announced that it will not raise salary levels, even though after-tax salaries in the reference sector (high-tech industry, following a decision by the Member States) in Switzerland are today on average 20% higher than those at CERN. With this decision, the ever-increasing gap between CERN and this comparator as well as other international organizations will not be reduced. In view of the apathy and deceit of the Management which reveals an obvious contempt for the efforts agreed to by the staff, a notice of strike action has been given for Friday 28 April 2006.

  10. Efficacy of the National Football League-225 Test to Track Changes in One Repetition Maximum Bench Press After Training in National Collegiate Athletic Association Division IA Football Players.

    Science.gov (United States)

    Mann, J Bryan; Ivey, Pat A; Stoner, Josh D; Mayhew, Jerry L; Brechue, William F

    2015-11-01

    Numerous investigations have attested to the efficacy of the National Football League (NFL)-225 test to estimate one repetition maximum (1RM) bench press. However, no studies have assessed the efficacy of the test to track changes in strength across a training program. The purpose of this study was to determine the accuracy of the NFL-225 test for determining the change in 1RM bench press in National Collegiate Athletic Association Division IA college football players after training. Over a 4-year period, players (n = 203) were assessed before and after a 6-week off-season resistance program for 1RM bench press and repetitions completed with 102.3 kg (225 lbs). Test sessions typically occurred within 1 week of each other. Players significantly increased 1RM by 4.2 ± 8.6 kg and NFL-225 repetitions by 0.9 ± 2.3, although the effect size (ES) for each was trivial (ES = 0.03 and 0.07, respectively). National Football League 225 prediction equations had higher correlations with 1RM before training (intraclass correlation coefficient [ICC] = 0.95) than after training (ICC = 0.75). The correlation between the change in NFL-225 repetitions and change in 1RM was low and negative (r = -0.22, p bench press strength after short-term training.

  11. Integration of scholastic curriculum in computergames – impossible or a design challenge?

    DEFF Research Database (Denmark)

    Larsen, Lasse Juel

    The present paper argues that integration of scholastic knowledge in computer games is a design challenge and one that will only work if you preserve the computer game as a game. This is important cause if you don’t adhere to or understand the dynamics of computer games you run the risk of destro......The present paper argues that integration of scholastic knowledge in computer games is a design challenge and one that will only work if you preserve the computer game as a game. This is important cause if you don’t adhere to or understand the dynamics of computer games you run the risk...... of destroying your own goal. In order to integrate the scholastic curriculum in computer games for a learning purpose it is and can not be stressed enough important to preserve the action-outcome circle inside the game world. Stated in simpler terms this means that users of learning games must see...

  12. The Effects of Tutoring in Preparing Chinese Students for the Scholastic Aptitude Test

    Science.gov (United States)

    Chen, Li

    2009-01-01

    Scholastic Aptitude Test, called SAT, has an immense influence in Chinese education. Most Chinese students choose to attend tutoring programs outside of the school curriculum to help them prepare. This study explores the tutoring programs both in China and the United States to assess variables that affect the quality of their preparation.…

  13. The Critique of Scholastic Language in Renaissance Humanism and Early Modern Philosophy

    NARCIS (Netherlands)

    Nauta, Lodi; Muratori, Cecilia; Paganini, Gianni

    2016-01-01

    This article studies some key moments in the long tradition of the critique of scholastic language, voiced by humanists and early-modern philosophers alike. It aims at showing how the humanist idiom of “linguistic usage,” “convention,” “custom,” “common” and “natural” language, and “everyday speech”

  14. Institutional Deprivation, Specific Cognitive Functions, and Scholastic Achievement: English and Romanian Adoptee (ERA) Study Findings

    Science.gov (United States)

    Beckett, Celia; Castle, Jennifer; Rutter, Michael; Sonuga-Barke, Edmund J.

    2010-01-01

    Whereas metaanalyses of cross-sectional adoption studies have indicated that there is an impact of early deprivation on adoptee's cognitive ability, these effects generally diminish markedly after upbringing in adoptive homes. Outcomes in terms of scholastic attainment were not quite so positive in a cross-sectional metaanalysis, but the Swedish…

  15. Needful Implements in Improving the Study and Scholastic Skills of Nigerian Secondary School Students

    Science.gov (United States)

    Adegoroye, Biodun-Smith; Ajagbe, Adesina Adunfe

    2015-01-01

    Showing concern about the consistent depreciation in expected study and scholastic behaviours among Secondary School students and the trailing failure in school test and exams and public exams, the authors gathered empirical report on the chosen variables among a randomly selected 1,200 secondary school students in JSS I, II, III, SSS I, II, III…

  16. Scholastic Attainment Following Severe Early Institutional Deprivation: A Study of Children Adopted from Romania

    Science.gov (United States)

    Beckett, Celia; Maughan, Barbara; Rutter, Michael; Castle, Jenny; Colvert, Emma; Groothues, Christine; Hawkins, Amanda; Kreppner, Jana; O'Connor, Thomas G.; Stevens, Suzanne; Sonuga-Barke, Edmund J. S.

    2007-01-01

    The relationship between severe early institutional deprivation and scholastic attainment at age 11 in 127 children (68 girls and 59 boys) adopted from institutions in Romania was compared to the attainment of 49 children (17 girls and 32 boys) adopted within the UK from a non-institutional background. Overall, children adopted from Romania had…

  17. Bach, Beethoven, Bourdieu: "Cultural Capital" and the Scholastic Canon in England's A-Level Examinations

    Science.gov (United States)

    Legg, Robert

    2012-01-01

    This article applies Bourdieu's notion of "cultural capital" to historical, documentary research which investigates the construction of a scholastic canon within England's A-level music examinations. A digest of the ways in which this canon evolved between 1951 and 1986 is presented in support of the idea that examiners' responses to…

  18. Relation between Perceived Scholastic Competence and Social Comparison Mechanisms among Elementary School Children

    Science.gov (United States)

    Boissicat, Natacha; Pansu, Pascal; Bouffard, Therese; Cottin, Fanny

    2012-01-01

    According to the literature, among social comparison mechanisms, identification with an upward target would be the most frequent mechanism that students report to use. However, it remains unclear how the identification and the contrast mechanisms contribute to the construction of pupils' scholastic perceived competence. The aim of this study was…

  19. Neurological Soft Signs in Indian Children with Specific Developmental Disorders of Scholastic Skills

    Science.gov (United States)

    Sadhu, Raja; Mehta, Manju; Kalra, Veena; Sagar, Rajesh; Mongia, Monica

    2008-01-01

    Aim: To compare the occurrence of neurological soft signs (NSS) in children with specific developmental disorders of scholastic skills (SDDSS) and normal children. Methods: 36 cases of SDDSS were compared with 30 control children regarding sociodemographic and clinical variables and neurological soft signs. Results: Children with SDDSS had…

  20. An Integrative Model of Scholastic Judgments: Pupils' Characteristics, Class Context, Halo Effect and Internal Attributions

    Science.gov (United States)

    Dompnier, Benoit; Pansu, Pascal; Bressoux, Pascal

    2006-01-01

    This article proposes a model that integrates some of the determinants of scholastic judgment. The model is based on the assumption that a teacher's judgment in a particular discipline is influenced by different variables: the pupil's actual performance in the discipline, his/her actual performance in other disciplines (halo effect), the average…

  1. Schoolteachers' awareness about scholastic performance and nutritional status of Egyptian schoolchildren.

    Science.gov (United States)

    Galal, Osman M; Ismail, Ibrahim; Gohar, Azza S; Foster, Zoë

    2005-06-01

    Malnutrition disorders affect more than 30% of schoolchildren in Egypt. This problem appears to be largely attributable to poor dietary quality and micronutrient deficiencies, such as iron and vitamin A. Inadequate nutrition intake has important implications because malnutrition has been shown to negatively affect the cognitive development of primary schoolchildren. This study assesses the awareness of schoolteachers about the impact of malnutrition on the scholastic performance of primary schoolchildren living in Egypt. Two focus group discussions were conducted with Egyptian schoolteachers from the Quena and Kharbia Governorates. The study indicates that schoolteachers consider low body weight and thinness as the primary signs of malnutrition. They do not prioritize malnutrition as a factor for poor scholastic performance. They also suggest that unhealthful eating habits, especially a lack of breakfast, negatively affect children's interaction with schoolteachers and their ability to excel in their studies. Schoolteachers endorse a more reliable and nutritionally valuable school-feeding program as a way to increase the scholastic performance of their students. The teachers advocate developing integrated programs between the Ministry of Education, the Ministry of Health and Population, teachers, children, and parents that provide nutrition education. A lack of awareness among teachers about the relationship of nutrition and cognitive function can lead to the misdiagnosis or delayed management of malnourished and scholastically challenged schoolchildren. This paper suggests that proper school-feeding programs and nutrition education programs, which integrate government ministries, teachers, children and parents, should be developed to improve the physical and cognitive health status of Egyptian schoolchildren.

  2. CHALLENGE AND CHANGE IN SCHOLASTIC JOURNALISM AS RELATED TO THE TEACHING AND LEARNING OF ENGLISH LANGUAGE ARTS

    Directory of Open Access Journals (Sweden)

    Stacy Haynes-Moore

    2015-02-01

    Full Text Available Changing notions of literacy impact and complicate ways in which English language arts educators adapt curriculum in meaningful ways for students. In this paper, I position scholastic journalism as authentic, 21st It is a wintery Saturday morning and a small group of student writers and editors wait outside Publications Room 70 eager for me to unlock the school door. The group is ready to work. They century ELA coursework. I provide an historical overview of scholastic journalism. I emphasize impacts of media law, emergent technologies, and redesigned school literacy goals to the ways in which scholastic journalism negotiates acceptance within ELA curriculum.

  3. News/Press Releases

    Data.gov (United States)

    Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

  4. Media Coverage, Journal Press Releases and Editorials Associated with Randomized and Observational Studies in High-Impact Medical Journals: A Cohort Study.

    Directory of Open Access Journals (Sweden)

    Michael T M Wang

    Full Text Available Publication of clinical research findings in prominent journals influences health beliefs and medical practice, in part by engendering news coverage. Randomized controlled trials (RCTs should be most influential in guiding clinical practice. We determined whether study design of clinical research published in high-impact journals influences media coverage.We compared the incidence and amount of media coverage of RCTs with that of observational studies published in the top 7 medical journals between 1 January 2013 and 31 March 2013. We specifically assessed media coverage of the most rigorous RCTs, those with >1000 participants that reported 'hard' outcomes. There was no difference between RCTs and observational studies in coverage by major newspapers or news agencies, or in total number of news stories generated (all P>0.63. Large RCTs reporting 'hard' outcomes did not generate more news coverage than small RCTs that reported surrogate outcomes and observational studies (all P>0.32. RCTs were more likely than observational studies to attract a journal editorial (70% vs 46%, P = 0.003, but less likely to be the subject of a journal press release (17% vs 50%, P0.99, nor were they more likely to be the subject of a journal press release (14% vs 38%, P = 0.14.The design of clinical studies whose results are published in high-impact medical journals is not associated with the likelihood or amount of ensuing news coverage.

  5. Reciprocating pellet press

    Science.gov (United States)

    Jones, Charles W.

    1981-04-07

    A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

  6. The Global University Press

    Science.gov (United States)

    Dougherty, Peter J.

    2012-01-01

    The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

  7. Grappling with Gender: Exploring Masculinity and Gender in the Bodies, Performances, and Emotions of Scholastic Wrestlers

    Directory of Open Access Journals (Sweden)

    Phyllis L. Baker

    2011-11-01

    Full Text Available We contribute to the sociology of sport and gender literature with an ethnographic analysis of scholastic wrestling by observing the current climate of masculinity and gender. Our results suggest that it is necessary to understand men and sporting behavior within a broader framework of gender, not just masculinity, because the behavior of high school wrestlers fell along a gender continuum between an orthodox masculinity and femininity. Our exploration of the body, performance, and emotion practices of scholastic wrestlers gives credence to the current critiques of a hegemonic masculinity in men's sports. We show that gender is not dichotomous and that even in the highly masculinized sport of wrestling, feminine behavior by men is evident.

  8. WordPress Bible

    CERN Document Server

    Brazell, Aaron

    2010-01-01

    The WordPress Bible provides a complete and thorough guide to the largest self hosted blogging tool. This guide starts by covering the basics of WordPress such as installing and the principles of blogging, marketing and social media interaction, but then quickly ramps the reader up to more intermediate to advanced level topics such as plugins, WordPress Loop, themes and templates, custom fields, caching, security and more. The WordPress Bible is the only complete resource one needs to learning WordPress from beginning to end.

  9. The scholastic environmental projects inside of the planning and the territorial ordering

    International Nuclear Information System (INIS)

    Bonilla Luque, Pablo Emilio

    2005-01-01

    The scholastic institutions of the country, must fulfill the established thing in decree 1743 of the 3 of august of 1994, sent by the ministry of national education, forces to that all the establishments of education formal, as much officials as private, in their different levels from pre-student, basic and average, include within their institutional educative projects, scholastic environmental projects within the framework of environmental, local, regional and/or national diagnoses, with a view to helping to the resolution of specific environmental problems. Within this contextual frame the Universidad Libre create inter-institutional project PRAES integrated by its faculties of accountants office, of sciences of the education, and engineering. Through the program of environmental engineering it covers the own technical-practical requirements with the georreferencial frame that implies non-single concerning the cartography aspects, teledetection, photogrammetry and territorial planning, but that coordinates with the department of engineering of systems the development of computer Developing of the project, environmentally the geographic boundary in cartography, for all and each one of the educative establishments by UPZ, model applicable escalarmente to local regional and national level settles down, the computer science support helps by means of the development of the respective page web from each locality to the diffusion, overcrowded and access of the information, that finally it must allow the establishment of network PRAE of the scholastic environmental projects

  10. Gender differences in the causal relation between adolescents' maths self-concept and scholastic performance

    Directory of Open Access Journals (Sweden)

    Cristina Antunes

    2007-05-01

    Full Text Available Mathematics is a core subject in every school curriculum and it is strongly correlated with maths self-concept, which is defined as the subjective feelings and beliefs about one's competence in maths. In general, boys tend to report higher maths self-concept than girls, but the difference between boys and girls' maths scholastic performance is low or even inexistent. Some authors maintain that academic self-concept can play an important role as a motivational variable, promoting self-confidence and investment in the learning process. This study examined the causal relations between maths self-concept and maths scholastic performance in four cohorts of boys and girls within a three-wave longitudinal study. The first two cohorts were composed of 187 girls and 139 boys attending grades 7 and 8 at Time 1 and the third and fourth cohorts were composed of 167 girls and 123 boys attending grades 9 and 10 at Time 1. Structural Equation Modelling was used to test the fit of several models of causal relations. The results revealed that for the first two cohorts the best models were reciprocal and skill-development for both boys and girls. However, for the older students, a reciprocal model gave a best fit for the boys, but for the girls there was only one significant effect from maths self-concept to maths scholastic performance. Results are discussed on the basis of gender-related differential learning expectancies.

  11. Determining standard of academic potential based on the Indonesian Scholastic Aptitude Test (TBS benchmark

    Directory of Open Access Journals (Sweden)

    Idwin Irma Krisna

    2016-12-01

    Full Text Available The aim of this article was to classify The Indonesian Scholastic Aptitude Test or Tes Bakat Skolastik (TBS results for each subtest and describe scholastic aptitudes in each subtest. The subject of this study was 36,125 prospective students who took the selection test in some universities. Data analysis began by estimating  testees’ ability using the Item Response Theory, and benchmarking process using the scale anchoring method applying ASP.net web server technology. The results of this research are four benchmarks (based on cutoff scores on each subtest, characters which differentiate potential for each benchmark, and measurement error on each benchmark. The items netted give a description of the scholastic aptitude potential clearly and indicate uniqueness so that it could distinguish difference in potential between a lower bench and a higher bench. At a higher bench, a higher level of reasoning power is required in analyzing and processing needed information so that the individual concerned could do the problem solving with the right solution. The items netted at a lower bench in the three subtests tend to be few so that the error of measurement at such a bench still tends to be higher compared to that at a higher bench.

  12. The Spanish press associations, a consolidated model of professional organization / Las asociaciones de la prensa españolas, un modelo de organización profesional consolidado

    Directory of Open Access Journals (Sweden)

    Francisco Javier Paniagua Rojano - fjpaniagua@uma.es

    2008-01-01

    Full Text Available The Press Associations represent the prevailing organizational option among the Spanish journalists. At present, 50 Associations exist in Spain, specially limited to the provincial areas, but also to villages (Jerez de la Frontera, Talavera de la Reina, Santiago de Compostela, to shires (Campo de Gibraltar and even to regions, v. gr., the Unión de Periodistas Valencianos (Valencian Journalists Union. Likewise, there exist five specialized Associations; the most outstanding are the Asociación de Periodistas de Información Económica (Economic Information Association and the Asociación Española de la Prensa Deportiva (Sport Press Spanish Association. All the Associations are gathered into the Federación de Asociaciones de la Prensa de España (Federation of Spanish Press Associations. The present investigation analyzes level organization and syndication of Spanish journalists, the problems that affect to the professionals and the advantages derived from the belonging, offering information about: - Number of partners and trends registered in numbers. - Varied range of services to the professionals: the agreements with public and private corporations, labor exchanges, formative courses, paper an online magazines, etc.- Problems that affect to the professionals: the fight against working without qualification, the defense of the profession image and its values, etc. - Presence in Internet and adjustment to the new technologies.Resumen: Las asociaciones de la prensa representan la opción organizativa predominante entre los periodistas españoles. Suman, en la actualidad, un total de 50, la mayoría de ámbito provincial, aunque también las hay circunscritas a municipios (Jerez de la Frontera, Talavera de la Reina, Santiago de Compostela, a regiones (Campo de Gibraltar e incluso a comunidades autónomas, como la Unión de Periodistas Valencianos. De igual manera, existen cinco asociaciones de carácter especializado, como la Asociación de

  13. Nuclear reactors and fuel storage pools security in France and in Belgium, and the associated reinforcement measures. Press kit

    International Nuclear Information System (INIS)

    Besnard, Manon; Marignac, Yves; Boilley, David; MacKerron, Gordon; Becker, Oda; Lyman, Ed; Zerbib, Jean-Claude; Sotty, Meryl

    2017-10-01

    This report on the security of nuclear reactors and fuel storage pools in France and Belgium draws on the contributions of seven experts from France, Germany, the United Kingdom and the United States - specialists in nuclear safety, security, radioprotection and economics - to bring together the full range of expertise necessary to analyse the problem. Each contributor is only responsible for his/her contribution in the form it was commissioned and separately delivered to Greenpeace France. This report looks at an eminently sensitive subject in an extremely delicate context. Critical analysis and independent expertise must, in line with this, be approached in a way which conciliates two conflicting requirements. The first is that of democratic choice. The security of nuclear facilities in the face of external attacks must be open to public debate. There is no justifiable reason for this issue, a major factor in the assessment of risks related to different industrial and energy options, to be excluded from the democratic process. The public has a fundamental right to information about the risks associated with the operation of nuclear facilities, which includes assessing the risk of external attacks in all its dimensions. It is thus the responsibility of non-institutional experts to contribute to this debate. The second requirement, equally fundamental, is the preservation of public security. Contributing to this debate in a way that enhances the risk of an external attack on nuclear facilities, or, even worse, favours the success of a possible attack by revealing any flaws in the system, is of course out of the question. It is therefore also the responsibility of non-institutional experts to ensure that the protection of such facilities is not impaired by the information they collect or the analyses they produce and make available to the public. It is particularly difficult to strike this balance in the French context, since the authorities responsible for nuclear

  14. Hot-pressed geopolymer

    DEFF Research Database (Denmark)

    Ranjbar, Navid; Mehrali, Mohammad; Maheri, Mahmoud R.

    2017-01-01

    This research explores the use of simultaneous heating and pressing techniques in order to enhance the mechanical properties of fly ash (FA) based geopolymer under relatively low temperature conditions to ensure minimum-porosity. Four effective parameters of pressing force, alkali activator...

  15. Special Needs: Scholastic Disability Accommodations from K-12 and Transitions to Higher Education.

    Science.gov (United States)

    Chan, Vivien

    2016-02-01

    The number of students entering post-secondary education with already diagnosed disabilities is on the rise and mirrors the percentage of children in primary and secondary public schools with registered disabilities. Requirements governed by civil rights laws fundamentally change when comparing the support schools have to provide to students during primary and secondary school with disability access in postsecondary higher education. Psychiatrists may be asked to assist with scholastic disability at any stage of education and need to know about available supports and the parameters of disability in schools. Specifically, special attention should to be made in preparation for transition to postsecondary education when prior accommodations exist.

  16. WordPress Bible

    CERN Document Server

    Brazell, Aaron

    2011-01-01

    Get the latest word on the biggest self-hosted blogging tool on the marketWithin a week of the announcement of WordPress 3.0, it had been downloaded over a million times. Now you can get on the bandwagon of this popular open-source blogging tool with WordPress Bible, 2nd Edition. Whether you're a casual blogger or programming pro, this comprehensive guide covers the latest version of WordPress, from the basics through advanced application development. If you want to thoroughly learn WordPress, this is the book you need to succeed.Explores the principles of blogging, marketing, and social media

  17. Two layer powder pressing

    International Nuclear Information System (INIS)

    Schreiner, H.

    1979-01-01

    First, significance and advantages of sintered materials consisting of two layers are pointed out. By means of the two layer powder pressing technique metal powders are formed resulting in compacts with high accuracy of shape and mass. Attributes of basic powders, different filling methods and pressing techniques are discussed. The described technique is supposed to find further applications in the field of two layer compacts in the near future

  18. Change in hippocampal theta oscillation associated with multiple lever presses in a bimanual two-lever choice task for robot control in rats.

    Directory of Open Access Journals (Sweden)

    Norifumi Tanaka

    Full Text Available Hippocampal theta oscillations have been implicated in working memory and attentional process, which might be useful for the brain-machine interface (BMI. To further elucidate the properties of the hippocampal theta oscillations that can be used in BMI, we investigated hippocampal theta oscillations during a two-lever choice task. During the task body-restrained rats were trained with a food reward to move an e-puck robot towards them by pressing the correct lever, ipsilateral to the robot several times, using the ipsilateral forelimb. The robot carried food and moved along a semicircle track set in front of the rat. We demonstrated that the power of hippocampal theta oscillations gradually increased during a 6-s preparatory period before the start of multiple lever pressing, irrespective of whether the correct lever choice or forelimb side were used. In addition, there was a significant difference in the theta power after the first choice, between correct and incorrect trials. During the correct trials the theta power was highest during the first lever-releasing period, whereas in the incorrect trials it occurred during the second correct lever-pressing period. We also analyzed the hippocampal theta oscillations at the termination of multiple lever pressing during the correct trials. Irrespective of whether the correct forelimb side was used, the power of hippocampal theta oscillations gradually decreased with the termination of multiple lever pressing. The frequency of theta oscillation also demonstrated an increase and decrease, before and after multiple lever pressing, respectively. There was a transient increase in frequency after the first lever press during the incorrect trials, while no such increase was observed during the correct trials. These results suggested that hippocampal theta oscillations reflect some aspects of preparatory and cognitive neural activities during the robot controlling task, which could be used for BMI.

  19. Scholastic Journalism Teacher Use of Digital Devices and Social Networking Tools in a Poor, Largely Rural State

    Science.gov (United States)

    Plopper, Bruce L.; Conaway, Anne Fleming

    2013-01-01

    Research showing adolescents' ever-increasing use of digital devices, combined with calls from governmental officials to incorporate more technology into classroom activities, prompted this survey of Arkansas scholastic journalism advisers. The goal was to determine how they used digital communication devices in their teaching. Results showed lack…

  20. Harmony in Career Learning and Scholastic System (Project HI-CLASS). Final Evaluation Report 1992-93. OREA Report.

    Science.gov (United States)

    Duque, Diana L.

    Harmony in Career Learning and Scholastic System (Project HI-CLASS) was a Transitional Bilingual Education Title VII-funded program in its fifth and final year in 1992-93. The project offered instructional and support services to 641 students of limited English proficiency (LEP) at three sites, all of which had many immigrant students, in…

  1. A Comprehensive Review of the Literature on the Effects of Breakfast on Mental Performance and Scholastic Achievement.

    Science.gov (United States)

    Purnell, James P.

    A review of the literature on the effects of breakfast on mental performance and scholastic achievement reveals a dichotomy between the theoretical and the empirical literature. Whereas theoretical considerations maintain that breakfast makes a significant difference in mental performance in the late morning hours, empirical evidence can be…

  2. Differences in Scholastic Achievement of Public, Private Government-Dependent, and Private Independent Schools: A Cross-National Analysis

    Science.gov (United States)

    Dronkers, Jaap; Robert, Peter

    2008-01-01

    The gross differences in scholastic achievement among public, private government-dependent, and private independent schools in 22 countries are analyzed with Programme for International Student Assessment 2000 data. In a multilevel approach, the authors estimate these sector effects, controlling for sociological characteristics of students and…

  3. Analysis of accidents leading to amputations associated with operating with press machines, using Ishikawa and SCAT Combined method in a car manufacturing company

    Directory of Open Access Journals (Sweden)

    J. Nematolahi

    2015-12-01

      Conclusion: According to results, the main interfce causes of accidents leading to amputation due to operating with press machines is hurry at work because of increased production volume particularly by contractor companies. Furthermore, non-dynamic HSE system accompanied by ineffective supervision of personnel’s unsafe acts by the first layers of management are recognized as the basic causes of such accidents.

  4. ALUMINUM BOX BUNDLING PRESS

    Directory of Open Access Journals (Sweden)

    Iosif DUMITRESCU

    2015-05-01

    Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

  5. DSS / Press Room

    Science.gov (United States)

    Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS

  6. OAS :: Press Releases

    Science.gov (United States)

    subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Social Media Facebook Twitter Newsletters Press and Communications Department Contact us at: +1 (202) 370 Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber

  7. bbPress complete

    CERN Document Server

    Wynne, Rhys

    2013-01-01

    A concise guide, written in an easy-to-follow format.This book is aimed at ambitious website or blog owners looking to add a forum to their site quickly and easily. Basic experience in WordPress and with managing a website is expected. Knowledge of HTML and PHP will be a bonus, though it isn't necessary.

  8. Fatores de risco associados à pressão arterial elevada em adolescentes Risk factors associated with high blood pressure in adolescents

    Directory of Open Access Journals (Sweden)

    Kelly Samara da Silva

    2007-08-01

    Full Text Available Níveis elevados de pressão arterial (PA na infância e adolescência têm sido freqüentemente associados a outros fatores de risco cardiovasculares, além de hipertensão arterial na fase adulta da vida. O presente estudo objetivou identificar fatores de risco associados à PA elevada em adolescentes. Participaram do estudo 674 adolescentes de escolas públicas e privadas, de ambos os sexos (303 rapazes e 371 moças, com idade de 14 a 17 anos (16,5 DP 0,9, da cidade de João Pessoa, Paraíba. Mediante aplicação de um questionário, foram levantadas informações sobre: a indicadores sociodemográficos; b nível de prática da atividade física; c hábitos alimentares; c índice de massa corporal; e fumo e bebidas alcoólicas; e foram realizadas medidas de PA. A prevalência de PA elevada foi de 7,4%, sendo maior nos rapazes (10,2% quando comparada com a das moças (5,1%, p High levels of arterial blood pressure in childhood and adolescence have been often associated with other cardiovascular risk factors apart from arterial hypertension in the adult stage of life. The present study aimed at identifying risk factors associated with high blood pressure in adolescents. The subjects were 674 adolescents from public and private schools in the city of João Pessoa, Paraíba. These subjects were of both sexes (i.e., 303 boys and 371 girls and their ages spanned from 14 to 17 years old. By means of a questionnaire, information about the following aspects was gathered: a socio-demographic status; b physical activity levels; c eating habits; d body mass index; e consumption of alcohol and smoking. Moreover, measurements of arterial pressure (AP showed that the prevalence of high AP was 7.4 %, being higher in boys (10.2% when compared with girls (5.1%, p < 0.01. The results of the multivaried analysis indicated that overweight adolescents displayed from five to six times more chance of having high AP than adolescents with light/normal weight (boys: OR

  9. Prevalence of specific developmental disorder of scholastic skill in school students in Chandigarh, India

    Directory of Open Access Journals (Sweden)

    Priti Arun

    2013-01-01

    Full Text Available Background & objectives: Several studies have been conducted in India to determine the prevalence of learning disabilities in school children which has been reported to be 3-10 per cent among students population. The present study was conducted to find out prevalence of specific developmental disorder of scholastic skills in students of classes VII to XII and to find out feasibility of screening tool in Chandigarh, India. Methods: A cross-sectional study on school students was carried out in two phases. The students were drawn from classes VII to XII from 10 schools of Chandigarh, India. Details of academic performance of all the students was taken, subjectively from class teachers and objectively from the marks obtained in the last academic session. In phase I, 2402 students were assessed. In phase II, 108 students were randomly selected for evaluation for assessing sensitivity and specificity of screening proforma for teachers. A total of 124 students from phase I and all students in phase II were assessed in detail. Tests of intelligence (Malin′s Intelligence Scale for Indian Children and Standard Progressive Matrices, and NIMHANS Index for specific learning disability (SLD battery were administered. Results: A total of 38 students were found to be having specific developmental disorder of scholastic skills in phase I, that gave a prevalence of 1.58 per cent. Majority had mixed type of errors on SLD battery. There were more boys diagnosed with specific learning disability. Teacher′s screening instrument had high sensitivity (90.385 and specificity (94.68. Interpretation & conclusions: The findings of our study conducted in community, showed that specific learning disability was not identified even till later age. The screening instrument thus could be used by teachers to suspect students with specific learning disability.

  10. Myths About Press Freedom

    Directory of Open Access Journals (Sweden)

    Kaarle Nordenstreng

    2007-06-01

    Full Text Available This article intends to rectify three popular beliefs related to press freedom: (1 that the idea of a free marketplace of ideas with a self-righting truth belongs to original liberalism, (2 that UNESCO’s primary mission is to promote freedom of information, and (3 that the Universal Declaration of Human Rights provides legal safeguards for the media. These beliefs are shown, on the basis of the legacy of liberalism and documents of the international community, to be misleading myths. Instead of accurate readings of the idea of freedom, they serve as ideological positions which are harmful to democracy. The Millennium Declaration provides further proof that the international community has a much more balanced view of freedom of information than that typically held by media professionals. Therefore it is important to liberate the concept of press freedom from its ideological baggage.

  11. Progress in hot pressing

    International Nuclear Information System (INIS)

    Brodhag, C.; Thevenot, F.

    1988-01-01

    An experimental technique is described to study hot pressing of ceramics under conditions of controlled temperature and pressure during both the heating and final sintering stages. This method gives a better control of the final microstructure of the material. Transformation mechanisms can be studied during initial heating stage (impurity degasing, reaction, phase transformation, mechanical behavior of intergranular phase...) using computer control and graphical data representations. Some examples will be given for different systems studied in our laboratory: B (α, β, amorphous), B 12 O 2 (reaction of B + B 2 O 3 ), Si 3 N 4 ( + additives), TiN, Al 2 O 3 + AlON,ZrC

  12. Influence of a 2- to 6-year physical education intervention on scholastic performance: The CHAMPS study-DK.

    Science.gov (United States)

    Bugge, Anna; Möller, Sören; Tarp, Jakob; Hillman, Charles H; Lima, Rodrigo Antunes; Gejl, Anne Kaer; Klakk, Heidi; Wedderkopp, Niels

    2018-01-01

    The aim of this study was to investigate the influence of a school-based intervention with a tripling of physical education (PE) lessons from two (90 minutes) to six lessons per week (270 minutes) on scholastic performance. This study is part of the CHAMPS study-DK, a quasi-experimental study that began in 2008. The intervention group consisted of six schools, and the control group consisted of four matched schools (mean age at baseline=8.4 years, kindergarten class fourth grade). Academic performance was extracted from the national test system from 2010 to 2014 (Math and Danish were measured at third and sixth, and second, fourth and sixth grades, respectively). Participants included 1888 students participating in at least one scholastic performance test. Linear mixed models were applied to test for differences between groups and adjusted for known confounders. No significant differences were observed between groups in the academic performance tests (control group reference); Danish second grade β=-1.34 (95% CI -9.90, 7.22), fourth grade β=0.22 (95% CI -6.12, 6.56), sixth grade β=1.03 (95% CI -5.02, 7.08), and all grades combined β=0.28 (95% CI -5.74, 6.31) and Math third grade β=-2.87 (95% CI -9.65, 3.90), sixth grade β=0.99 (95% CI -7.36, 9.34) and combined β=-1.20 (95% CI -8.10, 5.71). In conclusion, no significant differences were observed between intervention and control schools for scholastic performance. Importantly, there were no negative effects of additional PE on scholastic outcomes, despite more PE and longer school days for intervention children. © 2017 The Authors Scandinavian Journal of Medicine & Science In Sports Published by John Wiley & Sons Ltd.

  13. ISS Expedition 08 Press Kit

    Data.gov (United States)

    National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...

  14. WordPress multisite administration

    CERN Document Server

    Longren, Tyler

    2013-01-01

    This is a simple, concise guide with a step-by-step approach, packed with screenshots and examples to set up and manage a network blog using WordPress.WordPress Multisite Administration is ideal for anyone wanting to familiarize themselves with WordPress Multisite. You'll need to know the basics about WordPress, and having at least a broad understanding of HTML, CSS, and PHP will help, but isn't required.

  15. Four Theories of the Press.

    Science.gov (United States)

    Siebert, Fred S.; And Others

    A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…

  16. Influence of a 2- to 6-year physical education intervention on scholastic performance

    DEFF Research Database (Denmark)

    Bugge, Anna; Möller, Sören; Tarp, Jakob

    2018-01-01

    that began in 2008. The intervention group consisted of six schools, and the control group consisted of four matched schools (mean age at baseline=8.4 years, kindergarten class fourth grade). Academic performance was extracted from the national test system from 2010 to 2014 (Math and Danish were measured...... observed between groups in the academic performance tests (control group reference); Danish second grade β=−1.34 (95% CI −9.90, 7.22), fourth grade β=0.22 (95% CI −6.12, 6.56), sixth grade β=1.03 (95% CI −5.02, 7.08), and all grades combined β=0.28 (95% CI −5.74, 6.31) and Math third grade β=−2.87 (95% CI......The aim of this study was to investigate the influence of a school-based intervention with a tripling of physical education (PE) lessons from two (90 minutes) to six lessons per week (270 minutes) on scholastic performance. This study is part of the CHAMPS study-DK, a quasi-experimental study...

  17. Trends in linguistic, scholastic and educational policies in trentino and Alto Adige (1919-1939

    Directory of Open Access Journals (Sweden)

    Elisa Gori

    2016-01-01

    Full Text Available The text proposes the examination of school and educational policy choices made in the territories of Trentino and Alto Adige, for German and Ladin speaking minorities in the time period between the end of the first major world conflict and the beginning of the second. During the historical period under consideration, the territories of the new provinces were headquarters and object of multiple political, economic and cultural operations, marked by different and opposite strategies: referrals of implicit nationalist trend which attributed extensive legislative powers to central authorities, were replaced by more democratic guidelines, that embraced local autonomies and recognized the rights of the minorities. Search for a political balance between the two instances, which was initially pursued, left the field with the arrival of the first fascist government to a new scenario with the aim of Italianize, even with the use of violence, the kind and organization of the new provinces. The same contradictory scenario will mark the evolution of educational policies in the new territories; the attempt to extend the Italian scholastic regulations to new provinces, first gradually and respectfully on the linguistic minorities, their schools and traditions, with the fascist government will suffer a significant change in behavior and reasoning. The theme of this research, which is little studied and analyzed in detail, assumes its relevance, whether in terms of historical and educational research linked to particular historic moment and geographical context, whether in terms of the consequences that it had in the construction of the Italian Republic.

  18. Which Freedom of the Press?

    DEFF Research Database (Denmark)

    Rytter, Jens Elo

    2010-01-01

    The article surveys the historical and current meaning of "Freedom of the Press" in constitutional and human rights law. Two different conceptions exist, the narrow one defining freedom of the press as the freedom of every one to publish without prior restraint, the broader one defining it as a...... privileged freedom of the organised press to gather and report on information of public interest. These two conceptions have very different answers to the question of whether the press should enjoy some privilege to be exempt from ordinary legislation when such legislation restricts the access of the press to inform...

  19. WordPress for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2014-01-01

    The bestselling WordPress guide, fully updated to cover the 2013 enhancements WordPress has millions of users, and this popular guide has sold more than 105,000 copies in its previous editions. With the newest releases of WordPress, author and WordPress expert Lisa Sabin-Wilson has completely updated the book to help you use and understand all the latest features. You'll learn about both the hosted WordPress.com version and the more flexible WordPress.org, which requires third-party hosting. Whether you're switching to WordPress from another blogging platform or just beginning to blog, you'll

  20. CSR-communication in the Business Press

    DEFF Research Database (Denmark)

    Morsing, Mette; Langer, Roy

    on a broadly encompassing and ambiguous definition of CSR. Our empirical data shows how the business press in its discourse on CSR provides no clarity on the definition of CSR in terms of a coherent motive, a dominant stakeholder or a consistent issue, but rather maintains ambiguity and imprecision about......In this paper we analyze the construction of corporate social responsibility in the business press as an act of strategic ambiguity. While corporate social responsibility (CSR) generally evokes positive associations in public opinion, this paper demonstrates that these associations are based...... is systematically maintained in the business press. We refer to this process as strategic ambiguity. The paper discusses the potential value and limitations of framing CSR in a state of strategic ambiguity in the context of the concurrent rethinking of the role of business in modern welfare societies....

  1. Avaliação de fatores de risco associados com elevação da pressão arterial em crianças Evaluation of risk factors associated with increased blood pressure in children

    Directory of Open Access Journals (Sweden)

    Frederico D Garcia

    2004-02-01

    Full Text Available OBJETIVOS: Identificar fatores associados a níveis elevados de pressão arterial em crianças. MÉTODOS: Estudo transversal da pressão arterial de 672 crianças entre 2 e 11 anos de idade em duas instituições de ensino de Belo Horizonte, entre setembro e dezembro de 2001. A pressão arterial foi mensurada seguindo os parâmetros estabelecidos pelo relatório do Update on the 1987 Task Force Report on High Blood Pressure in Children and Adolescents. As seguintes variáveis foram estudadas: idade, sexo, cor da pele, índice de qualidade de vida urbana, estatura e índice de massa corporal. Para a comparação das médias, foi utilizada a análise de variância, e para a comparação de proporções, o teste qui-quadrado. As variáveis associadas a níveis mais elevados de pressão arterial foram incluídas em análise de regressão linear múltipla. RESULTADOS: Na análise univariada, níveis mais elevados de pressão arterial sistólica e diastólica estiveram associados com crianças de cor branca, crianças da região com alto índice de qualidade de vida urbana e com elevado índice de massa corporal. Na análise multivariada, apenas o índice de massa corporal, o índice de qualidade de vida urbana e a estatura mantiveram-se associados com níveis elevados de pressão sistólica. Em relação aos níveis mais elevados de pressão arterial diastólica, apenas as variáveis índice de qualidade de vida urbana e idade foram mantidas no modelo após o ajustamento. CONCLUSÃO: O sobrepeso e a obesidade estiveram associados com níveis mais elevados de pressão arterial sistólica. Outros fatores, não identificados, foram parcialmente associados a níveis mais elevados de pressão arterial de crianças do estabelecimento privado do ensino.OBJECTIVE: To identify factors associated with increased arterial blood pressure in children. METHODS: In this cross-sectional study, arterial blood pressure was measured in 672 children between 2 and 11

  2. WordPress For Dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2011-01-01

    The bestselling guide to WordPress, fully updated to help you get your blog going! Millions of bloggers rely on WordPress, the popular, free blogging platform. This guide covers all the features and improvements in the most up-to-date version of WordPress. Whether you are switching to WordPress from another blogging platform or just starting your first blog, you'll find the advice in this friendly guide gets you up to speed on both the free-hosted WordPress.com version and WordPress.org, which requires the purchase of web hosting services, and figure out which version is best for you. You'll b

  3. DESIGN AND DEVELOPMENT OF AN INTELLIGENT INSTRUCTIVE SYSTEM: Scholastic Tutor (St*

    Directory of Open Access Journals (Sweden)

    Adebiyi MARION O.

    2011-10-01

    Full Text Available Intelligent Tutoring Systems (ITS is an act of impacting knowledge while computer teaches or acts as the tutors which is a supplement to human teachers. The ability to teach each student based on their individual abilities a major advantage posed by ITS and that is why it is being embraced in this work. This work describes the design of an Intelligent Tutoring System that was tagged Scholastic tutor (St*, which has the individual learning and collaborative problem-solving modules. The individual tutoring module was designed to provide appropriate lessons to individuals based on his/her background knowledge level, interest, and learning style and assimilation rate prior to using the tutoring system. A software agent is used to monitor and process these parameters, arrange the learning topic, and exercises, for each individual. The collaborative problem-based tutoring module was designed to present tutorial problems and provides facilities to assist learners with some useful information and advice for problem solving. This is because the present lecturing methodology which is the conventional teaching methodology provides an interactive classroom setting that promotes the open exchange of ideas and allows for the lecturer to communicate directly with the students but has a great disadvantage of not teaching all the students according to their own learning rate and pace. The intelligent tutor solves this problem by providing individualised learning for each student where they can learn according to their own pace and learning abilities it will provide remedy and advice when learners encounter difficulties during learning session. The classical model of ITS architecture has four main modules; domain model, student model, tutoring model and the user interface model.

  4. [Neuroscience in Al Andalus and its influence on medieval scholastic medicine].

    Science.gov (United States)

    Martín-Araguz, A; Bustamante-Martínez, C; Fernández-Armayor Ajo, V; Moreno-Martínez, J M

    Since the application of technical medicine by the Greeks, modern neurology has been based on a body of knowledge and cultural heritage from ancient times. In this paper we review the contribution made by Al Andalus to neuroscience during the Middle Ages and its repercussions on modern neurology. Following the death of Mohammed in the vii century AD, Islam enjoyed one of the most spectacular periods of expansion in the history of mankind. Occupation of the cities of Alexandria and Gundishapur put the Arabs into contact with original Greco Latin manuscripts, which were assimilated and divulged by Islamic scientists in the middle eastern caliphates of Damascus and Bagdad as well as the western caliphates of Al Andalus (Spain) and Kairwan (Tunis). This classical hippocratico galenico medicine was refashioned into the so called arabized galenism, which markedly influenced the Scholastics and the cultured world of the lower Middle Ages and became the basis of European medicine until well into the Renaissance period. There was a first Spanish cultural Renaissance in Al Andalus during the ix xii centuries, which led to a flowering unheard of in the Middle Ages before then. Andalusian doctors made major contributions to the body of knowledge about neuroscience and developed major philosophical concepts of human understanding. Thus, Abulcasis (936 1013), the father of modern surgery, developed material and technical designs which are still used in neurosurgery. Averroes suggested the existence of Parkinson s syndrome and attributed photoreceptor properties to the retina. Avenzoar described meningitis, intracranial thrombophlebitis, mediastinal tumours and made contributions to modern neuropharmacology. Maimonides wrote about neuropsychiatric disorders and described rabies and belladonna intoxication. Aside from the political, religious and cultural differences between Al Andalus and the Christian kingdoms of the Iberian peninsula, the historical Andalusian period (711 1492

  5. An Update of Freedom of the Press and Information in Latin America and the Caribbean.

    Science.gov (United States)

    Garrison, Bruce; Munoz, Julio E.

    This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

  6. WordPress Top Plugins

    CERN Document Server

    Corbin, Brandon

    2010-01-01

    Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r

  7. Spontaneous pneumomediastinum after bench press training.

    Science.gov (United States)

    Nishino, Tomoya

    2017-04-01

    Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.

  8. A Prospective Study on the Influence of Scholastic Factors on the Prevalence and Initiation of Illicit Drug Misuse in Adolescence.

    Science.gov (United States)

    Zubak, Zoran; Zenic, Natasa; Ostojic, Ljerka; Zubak, Ivana; Pojskic, Haris

    2018-04-27

    This study aimed to prospectively investigate the scholastic factors related to illicit drug misuse (IDM) and the initiation of IDM among older adolescents from Bosnia and Herzegovina. This 2-year prospective study included 436 participants (202 females), who were an average of 16 years old at the beginning of the study (baseline). The participants were tested at baseline and follow-up (20 months later). The predictors included variables of scholastic-achievement (grade point average, school absences, unexcused absences and behavioral grade). The criteria were: (i) IDM at baseline; (ii) IDM at follow-up; and (iii) initiation of IDM over the study course. Results : Logistic regression indicated increased odds of IDM in adolescents who were more frequent absent from school (baseline: Odds Ratio (OR): 3.73, 95% Confidence Interval (CI): 2.12⁻6.57; follow-up: OR: 2.91, 95% CI: 1.90⁻4.65). The lower grade point average and more unexcused absences were evidenced for adolescents who consumed drugs on follow-up (OR: 1.67, 95% CI: 1.11⁻2.51; OR: 1.74, 95% CI: 1.30⁻2.32 for grade point average and unexcused absences, respectively). Initiation of IDM was predicted by frequent absences from school (OR: 2.2, 95% CI: 1.3⁻3.8), and lower behavioral grades (OR: 1.9, 95% CI: 1.2⁻3.3). The findings confirmed strong correlations between scholastic failure and IDM. Absences from school and lower behavioral grades at baseline were predictive of the initiation of IDM in older adolescents.

  9. I. An introduction to the relation of physical activity to cognitive and brain health, and scholastic achievement.

    Science.gov (United States)

    Hillman, Charles H

    2014-12-01

    The current pandemic of physical inactivity threatens both physical and cognitive health throughout the lifespan. This monograph describes the multidisciplinary study of aspects of childhood health and its relationship to cognitive and brain function, and scholastic performance. Specifically, we focus on physical activity and physical fitness along with nutrition and obesity; interconnected aspects of health that have declined over the past 30 years in children of industrialized nations. Although much emphasis has been placed on correcting physical aspects of these public health concerns, it is only more recently that attention has been paid to the relation between physical health and cognitive health among school age children. The monograph begins with an overview of current behavioral trends that compete with physical activity engagement and contribute to the failure to achieve the public health recommendations for physical activity among children in the United States. Following the epidemiological overview, the relation of childhood fitness to brain structure and function is examined among children with varying fitness levels. The observed dissimilarities between higher- and lower-fit children are discussed within the context of typical brain development. To broaden the scope of research presented herein, the relation of nutrient intake--among both undernourished and well-nourished children--and obesity on cognition and brain are discussed. Next, novel empirical data are presented from a correlational study that indicates a differential relation between childhood fitness and adiposity on various aspects of cognition. In an effort to provide a more comprehensive review, a later chapter is dedicated to describing a small body of literature investigating the relation of physical activity to special populations of children, including those with learning disorders. In doing so, practical applications as well as challenges and limitations of implementing physical

  10. Indre spenninger og ytre press

    DEFF Research Database (Denmark)

    Ibsen, Bjarne

    2011-01-01

    Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles.......Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles....

  11. BuddyPress theme development

    CERN Document Server

    Lister, Tammie

    2013-01-01

    This book is a hands-on tutorial guide to using BuddyPress.This book is great for designers and developers who are looking to learn how to develop BuddyPress themes. It's assumed that the reader has some understanding of Wordpress and is familiar with CSS and HTML.

  12. Head First WordPress

    CERN Document Server

    Siarto, Jeff

    2010-01-01

    Whether you're promoting your business or writing about your travel adventures, Head First WordPress will teach you not only how to make your blog look unique and attention-grabbing, but also how to dig into the more complex features of WordPress 3.0 to make your website work well, too. You'll learn how to move beyond the standard WordPress look and feel by customizing your blog with your own URL, templates, plugin functionality, and more. As you learn, you'll be working with real WordPress files: The book's website provides pre-fab WordPress themes to download and work with as you follow al

  13. Join Hands in the Construction of Brand Strategic Alliances--"Guangdong Underwear Association Strategic Press Conference & China International Fashion Underwear Forum Launching Ceremony" Successfully Staged

    Institute of Scientific and Technical Information of China (English)

    Zhao Zihan

    2012-01-01

    Guangdong province, the biggest underwear production base in China, even in the world, not only possesses "capital city of underwear in China" - Nanhai Yanbu, but also owns "the biggest underwear production base in China" - Chaoshan. Guangdong Underwear Association, newly established in the end of 2011, is carrying out a series of measures to foster and optimize the local brands, for the province's transformation to branding base from production base.

  14. Smashing WordPress Themes Making WordPress Beautiful

    CERN Document Server

    Hedengren, Thord Daniel

    2011-01-01

    The ultimate guide to WordPress Themes - one of the hottest topics on the web today WordPress is so much more than a blogging platform, and Smashing WordPress Themes teaches readers how to make it look any way they like - from a corporate site, to a photography gallery and moreWordPress is one of the hottest tools on the web today and is used by sites including The New York Times, Rolling Stone, flickr, CNN, NASA and of course Smashing MagazineBeautiful full colour throughout - web designers expect nothing lessSmashing Magazine will fully support this book by by promoting it through their webs

  15. Pré-hipertensão arterial e pressão de pulso aumentada em adolescentes: prevalência e fatores associados Arterial prehypertension and elevated pulse pressure in adolescents: prevalence and associated factors

    Directory of Open Access Journals (Sweden)

    Maria Luiza Garcia Rosa

    2006-07-01

    Full Text Available OBJETIVO: Estimar a prevalência de pré-hipertensão e pressão de pulso aumentada em escolares, e verificar associação dessas duas condições com sexo, idade, maturidade sexual, obesidade e atividade física. MÉTODOS: Em amostra de 456 estudantes de 12 a 17 anos, de escolas públicas e privadas do bairro do Fonseca, Niterói-RJ, entre 2003 e 2004, mediu-se a pressão arterial em duas visitas, aplicou-se questionário e foram feitas medidas antropométricas. RESULTADOS: Trinta e nove (8,6% adolescentes apresentaram pré-hipertensão (PH e 13,4%, pressão de pulso (PP aumentada. Na análise bivariada, a PH mostrou associação significativa com sexo, idade e obesidade, com prevalência maior em meninos, naqueles de 15 a 17 anos, e nos obesos. A PP aumentada associou-se somente com o sexo - maior prevalência nos meninos. A maturidade sexual não mostrou associação com a PH ou PP aumentada. Na regressão logística, as associações se mantiveram, com razões de chance de prevalência de PH de 7,7 para sexo; 4,3 para idade e 4,6 para obesidade; e de PP aumentada, de 10,8 para sexo. A PP mostrou correlação positiva com a atividade física. O aumento da PP ocorreu com o aumento da pressão arterial sistólica. CONCLUSÃO: A PH e a PP aumentadas estão presentes em adolescentes em uma população com baixa prevalência de hipertensão, principalmente em meninos, indicando a necessidade de realização de estudos com desenhos prospectivos para examinar a persistência e o impacto dessas condições.OBJECTIVE: To estimate the prevalence of prehypertension and elevated pulse pressure in adolescents and assess the association between those two conditions and sex, age, sexual development, obesity and physical activity. METHODS: Anthropometrical data and blood pressure were measured in and a questionnaire was applied to 456 adolescents (aged 12 to 17 years recruited from public and private schools, in the Fonseca district, in the city of Niter

  16. Science coverage and the press

    International Nuclear Information System (INIS)

    Hawkes, N.

    1992-01-01

    The writer, a journalist, summarizes the discussion of the Chilton Seminar, February 1992, and discusses the problems of bridging the incomprehension gap between scientists and lay readers of the press. (Author)

  17. Hot-pressing steatite bodies

    International Nuclear Information System (INIS)

    Aparicio Arroyo, E.

    1967-01-01

    Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs

  18. Harmony in Career Learning and Scholastic System (Project HI-CLASS). Transitional Bilingual Education, 1991-92. Final Evaluation Profile. OREA Report.

    Science.gov (United States)

    Angelina, Edward; Duque, Diana L.

    An evaluation was done of the first year of a 2-year renewal program at three high schools in New York City, Harmony in Career Learning and Scholastic System (Project HI-CLASS), designed to provide support services to students of limited English proficiency (LEP). The project proposed to provide individualized instruction focusing on basic skills,…

  19. Mathematical modelling of wet paper pressing

    NARCIS (Netherlands)

    Bežanovic, D.

    2005-01-01

    The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

  20. Conférence de presse | Press Conference

    CERN Multimedia

    CERN. Geneva; Bejar Alonso, Isabel

    2018-01-01

    10:00-11:00 Conférence de presse en présence de Lucio Rossi, chef du projet LHC à Haute Luminosité et Isabel Bejar Alonso, chargée de la configuration, de la qualité et des ressources du projet LHC à Haute Luminosité.

  1. Investing in a Large Stretch Press

    Science.gov (United States)

    Choate, M.; Nealson, W.; Jay, G.; Buss, W.

    1986-01-01

    Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.

  2. WordPress 3 Cookbook

    CERN Document Server

    Shreves, Ric

    2011-01-01

    This is a Packt Cookbook, which means it contains step-by-step instructions to achieve a particular goal or solve a particular problem. There are plenty of screenshots and explained practical tasks to make comprehension quick and easy. This book is not specifically for developers or programmers; rather it can be used by anyone who wants to get more out of their WordPress blog by following step-by-step instructions. A basic knowledge of PHP/XHTML/CSS/WordPress is desirable but not necessary.

  3. Law and the Student Press.

    Science.gov (United States)

    Stevens, George E.; Webster, John B.

    Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

  4. Local and international press digest

    CERN Multimedia

    2008-01-01

    The following are the top stories in the Maltese and the international press today. The Times gives prominence to the Prime Minister's flying visit to Geneva yesterday, where he signed a research cooperation agreement with CERN, the European nuclear research organisation.

  5. A new hot pressing technique

    International Nuclear Information System (INIS)

    Carcey, J.

    1975-01-01

    An original hot pressing method which may be applied to ceramics, metals, and refractory powders is described. The products obtained are fine grained polycristalline materials, with homogeneous structure, very high density, unstrained and of very large dimensions (several square meters). This process equally applies to composite materials including powders, fibers, etc.. [fr

  6. The association between status and cohesion in sport teams.

    Science.gov (United States)

    Jacob, C S; Carron, A V

    1998-02-01

    The main objective of this study was to establish the relationship between perceptions of status attributes and cohesion and status ranking and cohesion. A secondary aim was to determine whether age (operationalized by scholastic levels) or culture serves as a moderator in the relationship between either status attributes or status ranking and cohesion. Another secondary aim was to determine if differences are present in the importance attached by athletes to status attributes. Canadian and Indian athletes were tested. Although perceptions of the importance of status attributes and cohesiveness were related, the effect size was small (Green, 1991); perceptions of status ranking and cohesiveness were not related. Neither scholastic level nor culture served as a moderator in the association between either status attributes or status rank and cohesion. The importance that athletes attach to status attributes is similar between scholastic levels and across cultures. The results are discussed in terms of the role of status in sport teams.

  7. A press for the theater

    Directory of Open Access Journals (Sweden)

    Luciana Penna França

    2017-12-01

    Full Text Available Understanding the history of the amateur theater at the end of the XIXth century and the beginning of the XXth is possible, largely, because of the newspapers dedicated to the “theatrical affairs”. Such publications are important for the quantity and the diversity, revealing not only the place occupied by the theater in the capital, but also for the recognition of the press as a means of disclosure of plays, public education and opinion, artist projection, etc, not to mention personal affairs and requests, and the exchange of favors among managers and journalists. Even more, the press production of the dramatic amateurs clubs demonstrate the understanding of its role in the dissemination of ways to act and think beyond the stage and in the everyday life.

  8. Pressing technology for large bottoms

    International Nuclear Information System (INIS)

    Jilek, L.

    1986-01-01

    The technology has been selected of a circular plate bent into the shape of a trough, for pressing bottoms of pressure vessels from a circular plate of large diameter. The initial sheet is first bent in the middle by heating with the edges remaining straight. These are then welded longitudinally by electroslag welding and the circular shape is flame cut. The result will be a plate with a straight surface in the middle with raised edges which may be pressed into the desired shape. In this manner it is also possible to press pressure vessel bottoms with tube couplings from plates which are thickened in the middle and drilled; additional welding is then eliminated. Deformation from heat treatment may be avoided by the use of a fixture in the shape of a ring with a groove into which is fixed the edge of the bottom. During hardening of the bottom it will be necessary to care for the withdrawal of vapours and gases which would hamper uniform cooling. Bottom hardening with the grill and the cupola downwards has been proven. Deformation which occurs during treatment may to a certain extent be removed by calibration which cannot, however, be made without special fixtures and instruments. (J.B.)

  9. Modularity of Pressing Tools for Screw Press Producing Solid Biofuels

    Directory of Open Access Journals (Sweden)

    Miloš Matúš

    2012-01-01

    Full Text Available This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study of the complicated process of biomass compaction. The patented structure meets two main goals: the elimination of axial forces, leading to increased lifetime of the bearings, and the new modular design of a pressing chamber and tools with their geometry based on the application of a mathematical model.

  10. Verificação da variação da pressão arterial pelo uso de anestésicos locais com vasoconstritor = Verification of arterial blood pressure wich local anesthetics associated or not to vasoconstrictors

    Directory of Open Access Journals (Sweden)

    Palma, Fabiano Rodrigues

    2005-01-01

    Full Text Available Os autores realizaram estudo com 100 pacientes divididos em 4 grupos, os quais foram anestesiados com lidocaína, variando apenas no uso ou não de vasoconstritor e no tipo de vasoconstritor associado (adrenalina ou noradrenalina 1: 50. 000. Os pacientes foram submetidos a exodontia, com aferição da pressão arterial antes do início do procedimento anestésico e após a exodontia. Nos pacientes que receberam anestésico com vasoconstritor, normotensos ou hipertensos, não houve aumento significativo da pressão arterial; no grupo onde o sal anestésico não continha vasoconstritor, houve aumento estatisticamente significativo da pressão arterial

  11. WordPress Website Development

    OpenAIRE

    Lassila, Joonas

    2016-01-01

    The aim of this Bachelor’s thesis was to develop a WordPress mobile-first style website for the customer, Pohjois-Suomen Pesis. The main purpose of the development was to learn website designing principles and create a responsive website for the mobile and desktop platforms. The development process began defining the requirements of the website and creating the requirements document. Then next step was learning how to design a website layout and to choose the colour scheme for the site. T...

  12. Smashing WordPress Beyond the Blog

    CERN Document Server

    Hedengren, Thord Daniel

    2012-01-01

    The ultimate guide to WordPress, from the world's most popular resource for web designers and developers As one of the hottest tools on the web today for creating a blog, WordPress has evolved to be much more that just a blogging platform and has been pushed beyond its original purpose. With this new edition of a perennially popular WordPress resource, Smashing Magazine offers you the information you need so you can maximize the potential and power of WordPress. WordPress expert Thord Daniel Hedengren takes you beyond the basic blog to show you how to leverage the capabilities of WordPress to

  13. Teach yourself visually WordPress

    CERN Document Server

    Majure, Janet

    2012-01-01

    Get your blog up and running with the latest version of WordPress WordPress is one of the most popular, easy-to-use blogging platforms and allows you to create a dynamic and engaging blog, even if you have no programming skills or experience. Ideal for the visual learner, Teach Yourself VISUALLY WordPress, Second Edition introduces you to the exciting possibilities of the newest version of WordPress and helps you get started, step by step, with creating and setting up a WordPress site. Author and experienced WordPress user Janet Majure shares advice, insight, and best practices for taking full

  14. Fatores associados ao aumento no índice de incremento de pressão radial em indivíduos hipertensos Factors associated with increased radial augmentation index in hypertensive individuals

    Directory of Open Access Journals (Sweden)

    Renan Oliveira Vaz-de-Melo

    2011-09-01

    Full Text Available FUNDAMENTO: A rigidez arterial é uma variável preditora de morbimortalidade e um possível marcador de lesão vascular. Sua avaliação não invasiva por tonometria radial e análise do índice de incremento (r-AI permite identificar os pacientes expostos a um maior risco cardiovascular. OBJETIVO: Analisar a influência do r-AI em variáveis clínico-bioquímicas e sua influência na prevalência de dano em órgão-alvo em pacientes hipertensos. MÉTODOS: Cento e quarenta pacientes hipertensos consecutivos, em seguimento clínico ambulatorial, foram submetidos à análise transversal. Os níveis de pressão arterial (PA e o r-AI foram obtidos por tonometria de aplanação da artéria radial (HEM-9000AI, Onrom. Os pacientes foram alocados em tercis r-AI (r-AI 97%. RESULTADOS: A amostra era predominantemente composta por mulheres (56,4%, com idade média de 61,7 ± 11,7 anos e índice de massa corporal de 29,6 ± 6,1 Kg/m². O maior tercil apresentou uma proporção maior de mulheres (p = 0,001, maior PA sistólica (p = 0,001 e pressão de pulso (p = 0,014, e menor peso (p = 0,044, altura (p BACKGROUND: Arterial stiffness is a variable predictor of morbidity and mortality and a possible marker of vascular injury. Its non-invasive assessment by radial tonometry and analysis of the augmentation index (r-AI allows identifying patients exposed to higher cardiovascular risk. OBJECTIVE: To analyze the influence of r-AI on clinical-biochemical variables and its influence on the prevalence of target-organ damage in hypertensive patients. METHODS: 140 consecutive hypertensive patients, followed-up in an outpatient clinic, were analyzed in a cross-sectional study. Blood pressure (BP levels and r-AI were obtained by applanation tonometry of the radial artery (HEM-9000AI, Onrom. The patients were allocated into r-AI tertiles (r-AI 97%. RESULTS: The sample was predominantly composed of women (56.4%, mean age of 61.7 ± 11.7 years and body mass index 29.6

  15. Hybridizing scholastic psychology with Chinese medicine: a seventeenth-century Chinese Catholic's conceptions of xin (mind and heart).

    Science.gov (United States)

    Zhang, Qiong

    2008-01-01

    This paper explores the dynamics of cultural interactions between early modern China and Europe initiated by the Jesuits and other Catholic missionaries through a case study of Wang Honghan, a seventeenth-century Chinese Catholic who systematically sought to integrate European learning introduced by the missionaries with pre-modern Chinese medicine. Focusing on the ways in which Wang combined his Western and Chinese sources to develop and articulate his views on xin (mind and heart), this paper argues that Wang arrived at a peculiar hybrid between scholastic psychology and Chinese medicine, not so much through a course of haphazard misunderstanding as through his conscious and patterned use and abuse of his Western sources, which was motivated most possibly by a wish to define a theoretical position that most suited his social roles as a Catholic convert and a Chinese medical doctor. Thus, rather than seeing Wang as an epitome of"transmission failure," this paper offers it as a showcase for the tremendous dynamism and creativity occurring at this East-West "contact zone as representatives of both cultures sought to appropriate and transform the symbolic and textual resources of the other side.

  16. Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

    Directory of Open Access Journals (Sweden)

    Bo You

    2015-01-01

    Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.

  17. Pellet presses for remote fuel fabrication

    International Nuclear Information System (INIS)

    Densley, P.J.

    1978-01-01

    Two types of mechanical presses are being tested from the remote operation and remote maintenance aspects. Results will be used to recommend the type of press and design considerations required for operation in a remotely operated and maintained process line

  18. Press to compress contaminated wastes drums

    International Nuclear Information System (INIS)

    Prevost, J.

    1993-01-01

    This patent describes a press for contaminated wastes drums pressing. The press is made of a structure comprising a base and an upper stringer bind to the base by vertical bearers, a compression system comprising a main cylinder and a ram, connected to the upper stringer

  19. IDEAL: ACADEMIC PRESS JOURNALS ONLINE

    CERN Multimedia

    The Library

    2001-01-01

    All Academic Press journals are available online to CERN users for a test period which will last until the end of July. The service 'IDEALIBRARY' includes 174 scientific journals that cover several domains, ranging from engineering to mathematics, computing and physics. Titles covered are among others 'Atomic Data and Nuclear Data Tables', 'Nuclear Data Sheets', 'Annals of Physics', 'Journal of Parallel and Distributed Computing'. Reference citations present in each article are linked to the corresponding full text, when the latter is published by a member of the CrossRef consortium (members are: Elsevier, APS, AIP and others). Therefore, the navigation between articles and references is uninterrupted. A search engine allows queries by author, title and publication year. See http://www.idealibrary.com. At present the Library is evaluating a site license offer proposed by the publisher.

  20. Influência de vasoconstritores associados a anestésicos locais sobre a pressão arterial de ratos hipertensos e normotensos Influence of vasoconstrictors associated with local anesthetics on the arterial pressure of hypertensive and normotensive rats

    Directory of Open Access Journals (Sweden)

    Apparecido Neri Daniel

    1999-07-01

    Full Text Available A utilização de anestésicos locais associados a vasoconstritores em pacientes hipertensos é controversa. Neste estudo, verificamos a influência desta associação sobre a pressão arterial caudal (PA em ratos hipertensos DOCA-sal. Após ligeira anestesia com éter, os anestésicos GRUPO I - lidocaína 2% sem vasoconstritor, GRUPO II - lidocaína com fenilefrina, GRUPO III - lidocaína a 2% com noradrenalina, GRUPO IV - prilocaína 3% com felipressina, GRUPO V - mepivacaína 2% com adrenalina e GRUPO VI - mepivacaína com noradrenalina foram injetados na submucosa da boca (anestesia infiltrativa, em ratos DOCA-sal e controles. A PA foi determinada 5 e 15 minutos após a primeira dose do anestésico e também 5 e 15 minutos após a segunda dose. Os dados obtidos indicaram que: a a PA dos ratos DOCA-sal (193,05 ± 4,25 mmHg; n = 43 foi significativamente superior àquela observada nos animais controles (115,64 ± 2,47 mmHg; n = 43 e, b não houve variação significativa nas PA observadas em animais DOCA-sal e controles pela administração dos anestésicos locais testados. Assim, nossos dados experimentais sugerem que a presença de agentes vasoconstritores associados à lidocaína 2%, à prilocaína 3% e à mepivacaína 2% não interferem na PA desses animais, neste modelo experimental de hipertensão.The utilization of local anesthetics associated with vasoconstrictors in hypertensive patients is controversial. The purpose of this investigation was to verify the influence of this association on the arterial pressure (AP in DOCA-salt hypertensive rats. After light ether anesthesia, the anesthetics (Group I - lidocaine 2% without vasoconstrictor; Group II - lidocaine 2% with phenylephrine, Group III - lidocaine 2% with noradrenaline- Group IV - prylocaine 3% with felypressin; Group V - mepivacaine 2% with epinephrine, and Group VI - mepivacaine 2% with norepinephrine were injected into mucobuccal fold (infiltration anesthesia, in DOCA

  1. "...Establish the Student Press--And Stifle It!"

    Science.gov (United States)

    McCallie, Franklin

    1990-01-01

    Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…

  2. Professional WordPress design and development

    CERN Document Server

    Williams, Brad; Stern, Hal

    2014-01-01

    The highest rated WordPress development and design book on the market is back with an all new third edition. Professional WordPress is the only WordPress book targeted to developers, with advanced content that exploits the full functionality of the most popular CMS in the world. Fully updated to align with WordPress 4.1, this edition has updated examples with all new screenshots, and full exploration of additional tasks made possible by the latest tools and features. You will gain insight into real projects that currently use WordPress as an application framework, as well as the basic usage a

  3. RELATIONSHIP BETWEEN COMPACTING PRESSURE AND CONDITIONS IN PRESSING CHAMBER DURING BIOMASS PRESSING

    Directory of Open Access Journals (Sweden)

    Peter Križan

    2016-02-01

    Full Text Available In this paper, we will present the impact of the conditions in pressing chambers during the pressing of wooden briquettes. The conditions in pressing chambers can significantly impact the resulting compacting pressure required for the pressing of briquettes. In the introduction, we show which parameters of the pressing chamber during pressing can impact the resulting compacting pressure. The experiment results which are shown in this paper described the detected impact of some important pressing chamber parameters. This experiment aims to detect the pressing chamber length impact and the impact of the way of pressing. By setting the pressing conditions, we will be able to achieve the suitable resulting compacting pressure with respect to the required final briquettes quality.

  4. Towards a more responsible press

    Directory of Open Access Journals (Sweden)

    Taimur ul Hassan

    2012-12-01

    Full Text Available The article analyses Pakistan’s newspapers’ performance with regard to civil society in2003 by using content analysis approach. There is no gainsaying that a strong civil society guaranteesa strong democracy. In Pakistan, spells of military rule have stunted the growth of democracy,adversely affecting civil society. Media too has suffered as a result. Normative theories of media callfor laying down norms and conventions for media. In democracy, all sections of society should berepresented in media. In Pakistan’s case, due to military regimes and quasi democratic governments,combined with the demands of market economy, the media have largely not been able to fulfill thisresponsibility towards society. Social Responsibility demands that the media must fulfill itsresponsibility towards society, while giving a free space to all voices of society. In Pakistan, whethernewspapers played that role in 2003 when civil society had accelerated its campaign to end honorkillings and crimes against women is investigated. The findings show that newspapers did supportcivil society, showing a gradual movement towards a more responsible press.

  5. Press Advertising – Varieties and Sub-Varieties. Methods of Promoting the Press

    OpenAIRE

    Mikosz, Joanna

    2016-01-01

    In the text entitled “Press advertising – varieties and sub-varieties. Methods of promoting the press”, the author discusses press advertising, which is a fast developing mass-media phenomenon. Modernity has granted press advertising a high quality of print and paper, as well as Infinite possibilities of combining various promotional forms with the press. The author argues that press advertising is one of the best ways in which a company can communicate with the market. Its advantage is, abov...

  6. Beneficial Effects of ragi (Finger Millet) on Hematological Parameters, Body Mass Index, and Scholastic Performance among Anemic Adolescent High-School Girls (AHSG).

    Science.gov (United States)

    Karkada, Suja; Upadhya, Sharmila; Upadhya, Subramanya; Bhat, Gopalakrishna

    2018-03-29

    Adolescence is a period characterized by rapid physical, emotional, and mental growth and changes potentially resulting in health challenges. Anemia, which is a fairly common complication in this age group, is reported to negatively affect the cognitive ability of adolescents. Traditionally, ragi (Finger millet: Eleusine coracana), a cereal available in India, has been recommended as nutritional supplement to combat anemia because of its high protein and mineral content as well as anti-microbial property. This study sought to establish the effect of ragi in improving hematological parameters, body mass index, and scholastic performance among adolescent school girls. Sixty adolescent girls were randomly selected and divided into intervention (n = 30) and control groups (n = 30). The effect of dietary supplementation of ragi porridge on hematological parameters was evaluated on the intervention group at 45 and 90 days. Both groups were monitored for changes in body mass index and scholastic performance. A statistically significant increase in hemoglobin levels was observed in the intervention group after 90 days (from a mean of 11.3 g% to 12.54 g%; t (29)  = 7.514, p < .0001), with no significant changes in the control group. No statistically significant differences between the two groups were observed for mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration, mean corpuscular volume, red cell distribution width, body mass index, and scholastic performance. The data show that daily dietary supplementation with ragi porridge has a positive effect on hemoglobin levels in adolescent high schools girls. A well planned nutrition education with dietary supplementation is thus recommended for better outcomes.

  7. TA-03-0035 Press Building – D&D

    Energy Technology Data Exchange (ETDEWEB)

    Hasenack, Marvin Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-02

    The Press Building was constructed in 1954 with 15,073 ft2 of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.

  8. Smashing WordPress Beyond the Blog

    CERN Document Server

    Hedengren, Thord Daniel

    2011-01-01

    Smashing WordPress shows you how to utilize the power of the WordPress platform, and provides a creative spark to help you build WordPress-powered sites that go beyond the obvious. The second edition of Smashing WordPress has been updated for WordPress 3.1+, which includes internal, custom post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to build just about anything in WordPress, resulting in fast deployments and greater design flexib

  9. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    OpenAIRE

    Georgia Kate Chapman

    2015-01-01

    This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protecti...

  10. Learning disabilities among extremely preterm children without neurosensory impairment: Comorbidity, neuropsychological profiles and scholastic outcomes.

    Science.gov (United States)

    Johnson, Samantha; Strauss, Victoria; Gilmore, Camilla; Jaekel, Julia; Marlow, Neil; Wolke, Dieter

    2016-12-01

    Children born extremely preterm are at high risk for intellectual disability, learning disabilities, executive dysfunction and special educational needs, but little is understood about the comorbidity of intellectual and learning disabilities in this population. This study explored comorbidity in intellectual disability (ID) and learning disabilities (LD) in children born extremely preterm (EP; disabilities. LD were associated with a 3 times increased risk for SEN. However, EP children with ID alone had poorer neuropsychological abilities and curriculum-based attainment than children with no disabilities, yet there was no increase in SEN provision among this group. EP children are at high risk for comorbid intellectual and learning disabilities. Education professionals should be aware of the complex nature of EP children's difficulties and the need for multi-domain assessments to guide intervention. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  11. Microplasticity in hot-pressed beryllium

    International Nuclear Information System (INIS)

    Plane, D.C.; Bonfield, W.

    1977-01-01

    Closed hysteresis loops measured in the microstrain region of hot pressed, commercially pure, polycrystalline beryllium are correlated with a dislocation - impurity atom, energy dissipating mechanism. (author)

  12. WordPress 3.7 complete

    CERN Document Server

    Król, Karol

    2013-01-01

    WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.

  13. Activation of Selected Core Muscles during Pressing

    Directory of Open Access Journals (Sweden)

    Thomas W. Nesser

    2015-10-01

    Full Text Available Introduction: Unstable surface training is often used to activate core musculature during resistance training. Unfortunately, unstable surface training is risky and leads to detraining. Purpose: The purpose of this study was to determine core muscle activation during stable surface ground-based lifts. Methods: Fourteen recreational trained and former NCAA DI athletes (weight 84.2 ± 13.3 kg; height 176.0 ± 9.5 cm; age 20.9 ± 2.0 years volunteered for participation. Subjects completed two ground-based lifts: overhead press and push-press. Surface EMG was recorded from 4 muscles on the right side of the body (Rectus Abdominus (RA, External Oblique (EO, Transverse Abdominus (TA, and Erector Spinae (ES. Results: Paired sample T-tests identified significant muscle activation differences between the overhead press and the push-press included ES and EO. Average and peak EMG for ES was significantly greater in push-press (P<0.01. Anterior displacement of COP was significantly greater in push-press compared to overhead press during the eccentric phase. Conclusion: The push-press was identified as superior in core muscle activation when compared to the overhead pressing exercise. Keywords: torso, stability, weight lifting, resistance training

  14. Teenagers as Victims in the Press

    Science.gov (United States)

    Andersson, Gunvor; Lundstrom, Tommy

    2007-01-01

    Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…

  15. Communicators take nine Virginia Press Women awards

    OpenAIRE

    Owczarski, Mark

    2008-01-01

    Three Virginia Tech communicators have won Virginia Press Women awards. The winners - Susan Trulove, research division communications manager; Clara Cox, university publications director; and Heather Riley Chadwick, College of Architecture and Urban Studies communication manager - were announced at the Virginia Press Women Annual Spring Conference in Staunton, Va.

  16. 1979: The Campus Student Press in America.

    Science.gov (United States)

    Ingelhart, Louis E.

    1979-01-01

    Discusses a number of topics involving the campus press, including the independence of campus publications, censorship issues, the relationship between the student press and the college administrator, the financing of student newspapers, yearbook production and financing, probable future student publications trends, and the need for appropriate…

  17. Quid pro quo: tobacco companies and the black press.

    Science.gov (United States)

    McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

    2012-04-01

    We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

  18. WordPress web design for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2013-01-01

    Updated, full-color guide to creating dynamic websites with WordPress 3.6 In this updated new edition, bestselling For Dummies author and WordPress expert Lisa Sabin-Wilson makes it easy for anyone with a basic knowledge of the WordPress software to create a custom site using complementary technologies such as CSS, HTML, PHP, and MySQL. You'll not only get up to speed on essential tools and technologies and further advance your own design skills, this book also gives you pages of great case studies, so you can see just how other companies and individuals are creating compelling, customized, a

  19. Teach yourself visually complete WordPress

    CERN Document Server

    Majure, Janet

    2013-01-01

    Take your WordPress skills to the next level with these tips, tricks, and tasks Congratulations on getting your blog up and running with WordPress! Now are you ready to take it to the next level? Teach Yourself VISUALLY Complete WordPress takes you beyond the blogging basics with expanded tips, tricks, and techniques with clear, step-by-step instructions accompanied by screen shots. This visual book shows you how to incorporate forums, use RSS, obtain and review analytics, work with tools like Google AdSense, and much more.Shows you how to use mobile tools to edit a

  20. WordPress 24-Hour Trainer

    CERN Document Server

    Plumley, George

    2011-01-01

    The eagerly anticipated second edition, completely updated for WordPress 3.1 As an open source content management system, WordPress allows users to easily build feature-rich web sites with no programming experience. This unique book-and-video package is a friendly, self-paced beginners guide to the latest release of WordPress. Lessons are focused on practical, everyday tasks that users will need to create and maintain their sites: entering new content, creating new pages, managing menus, making content search-engine friendly. Plus you'll find lots of tips based on years of experience teaching

  1. WordPress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2013-01-01

    An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres

  2. Professional WordPress Plugin Development

    CERN Document Server

    Williams, Brad; Tadlock, Justin

    2011-01-01

    Taking WordPress to the next level with advanced plugin developmentWordPress is used to create self-hosted blogs and sites, and it's fast becoming the most popular content management system (CMS) on the Web. Now you can extend it for personal, corporate and enterprise use with advanced plugins and this professional development guide. Learn how to create plugins using the WordPress plugin API: utilize hooks, store custom settings, craft translation files, secure your plugins, set custom user roles, integrate widgets, work with JavaScript and AJAX, create custom post types. You'll find a practic

  3. Transformation plasticity and hot pressing

    International Nuclear Information System (INIS)

    Chaklader, A.C.D.

    1975-01-01

    The transformation plasticity during the phase transition of quartz to cristobalite, monoclinic reversible tetragonal of zirconia, metakaolin to a spinel phase, and brucite to periclase was investigated by studying their compaction characteristics. Viscous flow was found to be the predominant mechanism of mass transport (after an initial particle rearrangement stage) in the case of quartz to cristobalite phase change where the transformation was associated with the formation of an intermediate amorphous silica phase. The results on the monoclinic reversible tetragonal transformation of zirconia indicated that it is most likely controlled by internal strain induced by the stress associated with the volume change (ΔV/V) and the flow stress of the weaker phase. Particle movement and deformation of the weaker phase (possibly tetragonal) may be the manifestation of this plasticity. The plasticity in the case of metakaolin to a spinel phase appeared to start before the exothermic reaction (generally encountered in a dta plot) and may be diffusion controlled. The plasticity encountered during brucite to periclase transformation may be the combined effect of disintegration of precursor particles, vapor-phase lubrication and some deformability of freshly formed very fine MgO particles

  4. Study of Servo Press with a Flywheel

    Science.gov (United States)

    Tso, Pei-Lum; Li, Cheng-Ho

    The servo press with a flywheel is able to provide flexible motions with energy-saving merit, but its true potential has not been thoroughly studied and verified. In this paper, such the “hybrid-driven” servo press is focused on, and the stamping capacity and the energy distribution between the flywheel and the servomotor are investigated. The capacity is derived based on the principle of energy conservation, and a method of using a capacity percentage plane for evaluation is proposed. A case study is included to illustrate and interpret that the stamping capacity is highly dependent on the programmed punch motions, thus the capacity prediction is always necessary while applying this kind of servo press. The energy distribution is validated by blanking experiments, and the results indicate that the servomotor needs only to provide 15% to the flywheel torque, 12% of the total stamping energy. This validates that the servomotor power is significantly saved in comparison with conventional servo presses.

  5. WordPress 3 For Business Bloggers

    CERN Document Server

    Thewlis, Paul

    2011-01-01

    This is a practical, hands-on book based around a fictitious case study blog, which you will build on a development server using WordPress. The case study grows chapter by chapter, from installing your local development server, right up to the finished blog. This book is for anybody running or starting a business blog using WordPress, whether you plan to use your blog for PR and marketing, or want to profit directly from blogging.

  6. Denmark, Democracy and the Free Press

    DEFF Research Database (Denmark)

    Breiting, Søren

    2006-01-01

    What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world.......What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world....

  7. The Liberal Struggle for Press Freedom

    DEFF Research Database (Denmark)

    Mogensen, Kirsten

    In this paper, the public debate following the re-ligion-motivated assassination of Dutch filmmaker Theo van Gogh in November 2004 is examined. The paper aims at describ-ing religious as well as secular positions in the Danish debate about freedom of speech and press in relation to religious issues....... Historically, the concept of press freedom was linked to a fight for religious freedom in London, as described by Siebert....

  8. Chip compacting press; Jido kirikuzu asshukuki

    Energy Technology Data Exchange (ETDEWEB)

    Oura, K. [Yuken Kogyo Co. Ltd., Kanagawa (Japan)

    1998-08-15

    The chips exhausted from various machine tools are massy, occupy much space and make working environment worse by staying added cutting oil to lower part. The chips are exhausted as a result of machining and have not constant quality. Even if used material is same the chips have various shapes and properties by kinds and machining methods of used machine tools, and are troublesome materials from a standpoint of their treatment. Pressing and solidification of the chips have frequently been tried. A chip compacting press introduced in this paper, a relatively cheap chip compacting press aimed for relatively small scale chip treatment, and has such characteristics and effects as follows. Chips are pressed and solidified by each raw material, so fractional management can be easily conducted. As casting metal chips and curled chips of iron and aluminum can be pressed to about 1/3 to 1/5 and about 1/40, respectively, space saving can be conducted. Chip compacting pressing upgrades its transporting efficiency to make possible to reduce its transporting cost. As chip solidification controls its oxidation and most cutting oil are removed, chips are easy to recycle. 2 figs., 1 tab.

  9. AREVA in Mongolia - Press kit

    International Nuclear Information System (INIS)

    2013-01-01

    Mongolia is going through a crucial period in its history and setting up a strategic policy for uranium. The choices that are being made will affect the country and its future. Mongolia, since the mid-2000's, has benefited from significant mining development that has nourished the strong growth of the country. The giant Oyu Tolgoi (gold and copper) and Tavan Tolgoi (coal) deposits are the symbols of this mining potential. Uranium in particular has a major strategic role. The exploration programmes have revealed the presence of exploitable resources. On 26 February 2013, the Professional Council of Mineral Resources with the Ministry of Mines officially classified the Zoovch Ovoo deposit's with more than 50 000 tons of uranium. Following classification of the deposit of Dulaan Uul in 2011, the Zoovch Ovoo classification makes Mongolia officially one of the top 10 countries with the largest uranium resources. Mongolia has set about making the uranium industry a centrepiece of its strategy and its policy of independence. This new approach is founded in the Nuclear Energy Act adopted in the summer of 2009. The Mongolian State wants to create a uranium industry that makes Mongolia a nuclear fuel supplier for the Asian market. The choice of partners with whom the country associates to mine the uranium deposits is therefore important. Agreements have notably entered into with France, through AREVA which is a public company, as well as with Russia, China, Japan and India. AREVA has been present in Mongolia since 1997. AREVA is today represented in Mongolia by AREVA Mongol, its 100% subsidiary. AREVA Mongol carries out its exploration activities through Cogegobi and will manage its mining licences through AREVA Mines LLC. AREVA holds several exploration licences in Mongolia covering over 9,000 km 2 in the provinces of Dornogobi and Sukbaatar, where COGEGOBI is conducting its drilling programmes. This first phase has led to the first project-development steps

  10. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    Directory of Open Access Journals (Sweden)

    Georgia Kate Chapman

    2015-04-01

    Full Text Available This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protection from large media corporations and their political alignments. This report will assess the bias of reporting and news media publication that exists in Malaysia and Singapore due to legislative and regulatory constraints as opposed to bias that exist in the western liberal democratic nations of the United Kingdom (UK and the United States of America (USA due to Media Organisation control.

  11. Internet Marketing with WordPress

    CERN Document Server

    Mercer, David

    2011-01-01

    The book's accompanying Interactive learning environment on siteprebuilder.com gives you an online place to enhance and extend your practical experience through exercises, consolidate your learning and theoretical knowledge with marked quizzes, interaction with your WordPress marketing community, and fun and exciting extras such as challenges and competitions. This book is for people already using WordPress, who want more visitors, better visitors, and to convert more of them into paying customers. No prior marketing experience is required, although a basic understanding of either hosted or se

  12. WordPress 24-hour trainer

    CERN Document Server

    Plumley, George

    2015-01-01

    Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site

  13. Zinc coated sheet steel for press hardening

    Science.gov (United States)

    Ghanbari, Zahra N.

    Galvanized steels are of interest to enhance corrosion resistance of press-hardened steels, but concerns related to liquid metal embrittlement have been raised. The objective of this study was to assess the soak time and temperature conditions relevant to the hot-stamping process during which Zn penetration did or did not occur in galvanized 22MnB5 press-hardening steel. A GleebleRTM 3500 was used to heat treat samples using hold times and temperatures similar to those used in industrial hot-stamping. Deformation at both elevated temperature and room temperature were conducted to assess the coating and substrate behavior related to forming (at high temperature) and service (at room temperature). The extent of alloying between the coating and substrate was assessed on undeformed samples heat treated under similar conditions to the deformed samples. The coating transitioned from an α + Gamma1 composition to an α (bcc Fe-Zn) phase with increased soak time. This transition likely corresponded to a decrease in availability of Zn-rich liquid in the coating during elevated temperature deformation. Penetration of Zn into the substrate sheet in the undeformed condition was not observed for any of the processing conditions examined. The number and depth of cracks in the coating and substrate steel was also measured in the hot-ductility samples. The number of cracks appeared to increase, while the depth of cracks appeared to decrease, with increasing soak time and increasing soak temperature. The crack depth appeared to be minimized in the sample soaked at the highest soak temperature (900 °C) for intermediate and extended soak times (300 s or 600 s). Zn penetration into the substrate steel was observed in the hot-ductility samples soaked at each hold temperature for the shortest soak time (10 s) before being deformed at elevated temperature. Reduction of area and elongation measurements showed that the coated sample soaked at the highest temperature and longest soak time

  14. AUPress: A Comparison of an Open Access University Press with Traditional Presses

    Science.gov (United States)

    McGreal, Rory; Chen, Nian-Shing

    2011-01-01

    This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

  15. Bullying the media : Cultural and climato-economic readings of press repression versus press freedom

    NARCIS (Netherlands)

    Van de Vliert, E.

    Journalists and media assistants in many places are murdered, imprisoned, censored, threatened, and similarly harrassed. Here I document that, and explain why, there are three climato-economic niches of press repression versus press freedom as part of broader syndromes of national culture. A

  16. Hot pressing, strength, and fracture of calcium hexaboride

    International Nuclear Information System (INIS)

    Dutta, S.K.

    1975-01-01

    Fracture behavior and strength of hot-pressed CaB 6 were studied. The modulus of elasticity determined by attaching strain gages to the tensile surface of the bend bars to measure strain, was 55 +- 3 x 10 6 psi. The results are compared with values for other low density ceramic materials (B 4 C, SiB 6 , Be 4 B, AlB 12 ) in a table. The fracture mode was observed for both modulus of rupture and impact test specimens. Predominantly transgranular fracture, associated with distinct step cleavages is evident. Fracture origins were examined in an effort to understand the strength limiting features in hot-pressed CaB 6 specimens. Surface defects, large grain agglomerations, and isolated pore pockets were observed and varied from bar to bar; these were similar to those found in B 4 C. (U.S.)

  17. Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber

    Directory of Open Access Journals (Sweden)

    Peter Križan

    2012-01-01

    Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.

  18. 28 CFR 540.64 - Press pools.

    Science.gov (United States)

    2010-07-01

    ... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been...

  19. Law of the Student Press. Second Edition.

    Science.gov (United States)

    Student Press Law Center, Washington, DC.

    Noting dramatic changes in First Amendment protections for high school students and new legal issues facing college newspaper editors, this book describes in detail the legal rights and responsibilities of both the high school and college press. While the book is extensively footnoted, it intentionally avoids "legal-ese" and "brings…

  20. Press kit kicks off new branding.

    Science.gov (United States)

    Rees, Tom

    2004-01-01

    A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

  1. The Moral Universes of Libertarian Press Theory.

    Science.gov (United States)

    Wuliger, Gregory T.

    1991-01-01

    Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts…

  2. Investigation of pressing of molybdenum powder compacts

    International Nuclear Information System (INIS)

    Mymrin, S.A.; Kuznetsov, V.Eh.; Yampol'skij, M.L.; Leonov, S.A.; Mikhridinov, R.M.; Korzukhin, V.A.

    1990-01-01

    Results of an experimental investigation into pressing of compacts of MCh type molybdenum powders using the industrial equipment are presented. To measure the density of powder molybdenum billets a radioisotopic density meter with cesium-137 is used as radioactive gamma radiation source. The dependence of the produced billet density on the specific compacting pressure at different values of the powder bulk density is ascertained

  3. Eye-Pressing by Visually Impaired Children.

    Science.gov (United States)

    Jan, James E.; And Others

    1983-01-01

    The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)

  4. A Journalist's Guide to the Free Press.

    Science.gov (United States)

    Ingelhart, Louis

    1996-01-01

    Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

  5. Free Press in a Constitutional Democracy

    Science.gov (United States)

    Lucianek, Christine

    2014-01-01

    This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

  6. [Report from the Student Press Law Center.

    Science.gov (United States)

    Student Press Law Center, Washington, DC.

    The Student Press Law Center serves as a national clearinghouse to collect, analyze, and distribute information on the First Amendment rights of student journalists and journalism teachers and on violations of these rights in high schools and colleges. This report details information concerning current censorship incidents: the investigation by…

  7. When International Press Rights "Are" the News

    Science.gov (United States)

    Freedman, Eric

    2006-01-01

    In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

  8. Trial access to Cambridge University Press ebooks

    CERN Multimedia

    CERN Library

    2011-01-01

    From 1 August till 31 October, CERN users are invited to enjoy a trial access to all Cambridge University Press electronic books: http://ebooks.cambridge.org/. Please don't hesitate to send feedback to library.desk@cern.ch.

  9. Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Sujit Banerjee

    2005-10-31

    Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 µm are principally responsible. Georgia-Pacific is considering green

  10. Substance abuse prevalence and its relation to scholastic achievement and sport factors: an analysis among adolescents of the Herzegovina-Neretva Canton in Bosnia and Herzegovina.

    Science.gov (United States)

    Sekulic, Damir; Ostojic, Marko; Ostojic, Zdenko; Hajdarevic, Braco; Ostojic, Ljerka

    2012-04-05

    Substance abuse among adolescents is a major public health and social problem. However, studies rarely investigate the relationships between substance abuse, educational achievement and sport factors. Substance abuse is an even more significant problem in societies that have experienced trauma, such as Bosnia and Herzegovina, which have had recent wars. The aims of this study were to investigate substance abuse among adolescents in Bosnia and Herzegovina and to study the potential gender-specific relationships between a) sport factors (physical activity/exercise/athletic participation) and substance abuse and b) scholastic achievement and substance abuse. Our sample consisted of 1,032 adolescents who were 17 to 18 years old (435 boys and 597 girls) and who were in the final grade of high school. These subjects were randomly selected from the territory of Herzegovina-Neretva Canton of Bosnia and Herzegovina. Retrospective testing was performed using an extensive self-administered questionnaire. The questionnaire included questions involving topics such as sociodemographic variables, scholastic variables, sport factors, and substance abuse data (smoking habits, drugs consumption and alcohol consumption using the AUDIT questionnaire). Descriptive statistics, frequencies, analyses of the differences and correlational analyses were performed. Our results found that greater than one-third of the boys and one-fourth of the girls were daily smokers, and almost half of the boys and one-fifth of the girls practiced harmful drinking; other drugs (i.e. heroin, cocaine, amphetamines, etc.) were rarely consumed. Boys dominated in sport factors, whereas girls were more successful in scholastic achievement. Approximately 23% of the boys and 6% of the girls reported that they practiced harmful drinking and smoked simultaneously. Educational failure, which was defined as having one or more negative grades at the end of the last two school years, was identified in 20% of the boys

  11. Substance abuse prevalence and its relation to scholastic achievement and sport factors: an analysis among adolescents of the Herzegovina–Neretva Canton in Bosnia and Herzegovina

    Science.gov (United States)

    2012-01-01

    Background Substance abuse among adolescents is a major public health and social problem. However, studies rarely investigate the relationships between substance abuse, educational achievement and sport factors. Substance abuse is an even more significant problem in societies that have experienced trauma, such as Bosnia and Herzegovina, which have had recent wars. The aims of this study were to investigate substance abuse among adolescents in Bosnia and Herzegovina and to study the potential gender-specific relationships between a) sport factors (physical activity/exercise/athletic participation) and substance abuse and b) scholastic achievement and substance abuse. Methods Our sample consisted of 1,032 adolescents who were 17 to 18 years old (435 boys and 597 girls) and who were in the final grade of high school. These subjects were randomly selected from the territory of Herzegovina-Neretva Canton of Bosnia and Herzegovina. Retrospective testing was performed using an extensive self-administered questionnaire. The questionnaire included questions involving topics such as sociodemographic variables, scholastic variables, sport factors, and substance abuse data (smoking habits, drugs consumption and alcohol consumption using the AUDIT questionnaire). Descriptive statistics, frequencies, analyses of the differences and correlational analyses were performed. Results Our results found that greater than one-third of the boys and one-fourth of the girls were daily smokers, and almost half of the boys and one-fifth of the girls practiced harmful drinking; other drugs (i.e. heroin, cocaine, amphetamines, etc.) were rarely consumed. Boys dominated in sport factors, whereas girls were more successful in scholastic achievement. Approximately 23% of the boys and 6% of the girls reported that they practiced harmful drinking and smoked simultaneously. Educational failure, which was defined as having one or more negative grades at the end of the last two school years, was

  12. Discriminant Analysis of Essay, Mathematics/Science Type of Essay, College Scholastic Ability Test, and Grade Point Average as Predictors of Acceptance to a Pre-med Course at a Korean Medical School

    OpenAIRE

    Geum-Hee Jeong

    2008-01-01

    A discriminant analysis was conducted to investigate how an essay, a mathematics/science type of essay, a college scholastic ability test, and grade point average affect acceptance to a pre-med course at a Korean medical school. Subjects included 122 and 385 applicants for, respectively, early and regular admission to a medical school in Korea. The early admission examination was conducted in October 2007, and the regular admission examination was conducted in January 2008. The analysis of ea...

  13. Graphic Arts: Book Three. The Press and Related Processes.

    Science.gov (United States)

    Farajollahi, Karim; And Others

    The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

  14. A comunicação dos treinadores de futebol de equipes infanto-juvenis amadores e profissionais durante a competição The coach's communication with scholastic and adult teams during soccer matches

    Directory of Open Access Journals (Sweden)

    Fernando Jorge Lourenço dos Santos

    2012-06-01

    Full Text Available No futebol, a comunicação durante a competição é a forma que o treinador utiliza para transmitir informação com o objetivo de otimizar o rendimento dos jogadores. Pretendemos caracterizar e comparar os comportamentos de instrução dos treinadores de times de jogadores infanto-juvenis e adultos. Foram filmados dez treinadores (cinco de equipes infanto-juvenis e cinco de equipes de adultos em dezenove jogos. O sistema de observação para recolha de dados relativos ao comportamento de instrução foi o SAIC. Os resultados obtidos demonstram a existência de diferenças entre os treinadores de equipes infanto-juvenis e de adultos no que diz respeito à instrução, à atenção e ao comportamento motor reativo.During soccer competitions, coaches communicate with the players to address information that should optimize performance of the players. Our purpose is to characterize and compare the coach behaviors during instruction to adults and scholastic teams. Ten coaches (five from scholastic soccer teams and five from adult teams were videotaped during nineteen games. The observation system used for data collection of instruction behaviors was the SAIC. The results indicate the existence of differences between coaches from scholastic soccer teams and five from adult teams with regard to instruction, attention and reactive motor behavior.

  15. Bench press exercise: the key points.

    Science.gov (United States)

    Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K

    2015-06-01

    The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.

  16. Reducing VOC Press Emission from OSB Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

    2001-12-31

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

  17. Method for hot pressing beryllium oxide articles

    Science.gov (United States)

    Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

    1988-01-01

    The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

  18. Freedom of the Press – two concepts

    Directory of Open Access Journals (Sweden)

    Markus Meckl

    2015-03-01

    Full Text Available In 1644 the debate for freedom of expression started in modern times thanks to John Milton’s Areopagitica, where he still argued about God in order to justify his quest for freedom. With the enlightenment God lost his unifying role for society and could no longer serve as justification. Two arguments were brought then forward to justify freedom of the press: One by the continental movement of the enlightenment; the other from within the movement of utilitarianism, and most influentially by John Stuart Mill. Both underlined the importance of truth; however, they differed in their understanding on what truth was good for. This difference in their arguments had a lasting impact on the debate on the limits of freedom of the press.

  19. Analysis of Institutional Press Releases and its Visibility in the Press

    Directory of Open Access Journals (Sweden)

    José Antonio Alcoceba-Hernando, Ph.D.

    2010-01-01

    Full Text Available The relationships between institutional communication and media communication influence the shaping of social representations of public issues. This research article analyses these relationships based on the case study of the external communication of a public institution, the press releases of Spain’s Youth Institute (Instituto de la Juventud, aka, Injuve, during three years and their repercussion in the press during the same period of time. The results obtained in this research allowed drawing conclusions on the types of communication production of the aforementioned institution and the news treatment of such pieces of information by the printed and digital media. The press releases and the news items were studied using quantitative media content analysis which focused, especially, in referential issues like the information treatment, the thematic analysis, youth representations in the case of the releases; and the visibility of the press releases in the making of news

  20. ACTIVATED HOT PRESSING BEHAVIOR OF WC NANOPOWDERS

    Directory of Open Access Journals (Sweden)

    Edwin GEVORKYAN

    2010-06-01

    Full Text Available The questions of consolidation of nanopowders concerning hot compaction by pressing activated by electric current action are considered. Mechanisms of grain boundary creep-sliding which are sequentially prevalent in a forming of compacted structures under influence of temperature factor and in the presence of a direct electric heating are discussed. Structural-transformational sources and conditions of forming of high physical-mechanical properties of nanopowder refractory solid-state products are described.

  1. The antimatter. Press breakfast 23 may 2000

    International Nuclear Information System (INIS)

    Spiro, M.; Dejardin, M.; Debu, P.; Aleksan, R.

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  2. Press conference of the 15 october 2002

    International Nuclear Information System (INIS)

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  3. Design of jigs, fixtures and press tools

    CERN Document Server

    Venkataraman, K

    2015-01-01

    Textbook presenting the fundamentals of tool design with special focus on jigs, fixtures and die design Covers sections on sheet metal forming processes; turning, grinding, broaching, welding and modular fixtures; principles of clamping; and an Introduction to Presses and Auxiliary Equipment Author has many years' experience in both academic and industrial environments, and presents this work in an easily-accessible style End of chapter questions and answers assist the learning process for both practicing tooling designers and engineers, and manufacturing en

  4. Natural cold pressed oils as cosmetic products

    Directory of Open Access Journals (Sweden)

    Małgorzata Ligęza

    2016-12-01

    Full Text Available Background. It seems that patients may ask general practitioners about natural cosmetics applied on the skin regarding their safety and suitability. Objectives. The aim of the study was to analyze natural cold pressed oils as potential cosmetic products. Material and methods. Cold pressed oils obtained from selected seeds and fruit stones were analyzed, including: chokeberry seed oil, blackcurrant seed oil, elderberry seed oil, raspberry seed oil, apricot seed oil, tomato seed oil, strawberry seed oil, broccoli seed oil, Nigella sativa seed oil, hemp oil, safflower seed oil, Silybum marianum seed oil and coconut oil. 80 adult volunteers assessed the cosmetic properties of the analyzed oils. Each of the volunteers tested 2 to 4 different oils, by applying them on the skin. In addition, patch tests with all analyzed oils were performed on 23 individuals. Results. The majority of tested oils were positively evaluated by the participants: in the opinion of the participants, oil extracted from safflower had the best appearance (100% positive opinions, coconut oil had the best smell (70% positive opinions, while black currant seed oil showed the best absorbency (85% positive opinions. No irritation was observed within the analyzed product group, albeit one allergic reaction to apricot seed oil was observed with patch testing. Conclusions . Based on the achieved results, it could be suggested that natural cold pressed oils can be applied to the skin as cosmetics. Our observations may be helpful for general practitioners when choosing natural cosmetics.

  5. Forming of AHSS using Servo-Presses

    Science.gov (United States)

    Groseclose, Adam Richard

    Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.

  6. Fatores associados a níveis pressóricos elevados em escolares de uma cidade de porte médio do sul do Brasil Associated factors in high blood pressure among schoolchildren in a middle size city, southern Brazil

    Directory of Open Access Journals (Sweden)

    Cristine B. Costanzi

    2009-08-01

    Full Text Available OBJETIVO: Verificar a prevalência de níveis pressóricos elevados e fatores associados em escolares de Caxias do Sul (RS. MÉTODOS: Estudo transversal de base escolar avaliou crianças de 7 a 12 anos de ambos os sexos, provenientes das redes privada e pública. Foram realizadas três medidas da pressão arterial em uma única situação. Mensurou-se peso, altura, circunferência da cintura, aptidão aeróbia (teste de corrida de 9 minutos e situação socioeconômica. A estatística foi realizada através de teste do qui-quadrado e regressão logística para controle dos fatores de confusão. RESULTADOS: Participaram do estudo 1.413 crianças. A prevalência de escolares com níveis pressóricos elevados foi de 13,8% (sistólico, diastólico, sistólico/diastólico, e a proporção foi maior (dobro para as crianças obesas e/ou com sobrepeso do que para as com peso normal. Crianças com circunferência da cintura aumentada apresentaram 2,8 vezes mais chance de ter níveis pressóricos elevados do que as com circunferência adequada (intervalo de confiança de 95% 2,513-3,186 e p = 0,000. Já os indivíduos com nível alto no Índice Econômico Nacional apresentaram 2,6 vezes mais chance de terem pressão arterial elevada. CONCLUSÕES: Neste estudo, os escolares de 7 a 12 anos de Caxias do Sul apresentaram uma alta prevalência de níveis pressóricos elevados, e a medida de circunferência da cintura aumentada mostrou-se associada a essa condição, bem como o nível socioeconômico alto e a baixa aptidão física. Sugere-se medidas que possam incentivar a prática de atividade física e controle alimentar para melhoria dos níveis pressóricos e consequente diminuição de fatores de risco.OBJECTIVE: To establish the prevalence of high blood pressure and associated factors among schoolchildren from Caxias do Sul, state of Rio Grande do Sul, Brazil. METHODS: This school-based cross-sectional study assessed boys and girls aged 7 to 12 years

  7. Tjekkoslovakisk presse år 2

    Directory of Open Access Journals (Sweden)

    Rudolf Prevratil

    1991-09-01

    Full Text Available Danske teleselskaber overvejer at etablere sig som kabeloperatører i Polen, mens et amerikansk selskab allerede er igang i Warszawa og Krakow. Franske lokalradionetworks opretter filialer i Polen og Tjekko- slovakiet. Den tjekkiske statsradio stiller sendenet til rådighed for Radio Free Europe. Springer-koncernen opretter en "østtysk" pendant til Bild, hvis redaktionelle hovedlinje lægger sig op ad de dybe sociale frustrati- oner, der fulgte med DDR's indlemmelse i BDR. Maxwell, Hersant og Berlusconi m.fl. etablerer sig alene eller med lokale konstellationer inden for trykt presse i flere øst- og mellemeuropæiske stater. Samtidig for- søger den tidligere undergrundspresse at vinde økonomisk og politisk fodfæste inden for markedets og "det legale samfunds" rammer, i kon- kurrence med fortidens mediemutanter og vestlige mediekoncerner. Rudolf Prevratils artikel er en refleksion over en del af de problemer, primært af økonomisk og politisk art, som har tårnet sig op for den tjek- koslovakiske presse efter fløjlsrevolutionen i november 1989. Den giver et billede af dagens situation og får gennem sine analyser påvist, at etab- lingen af en demokratisk presse i Tjekkoslovakiet ikke alene er afhængig af "hjælp udefra", men i nok så høj grad forudsætter et net af sociale og kulturelle udviklingsprocesser, som både anerkender opgøret med for- tiden og vedkender sig den historiske arv. Artiklen er oversat fra engelsk af Per Jauert.

  8. Press Freedom on the Media Agenda

    OpenAIRE

    Pires, Terezinha Maria de Carvalho Cruz

    2007-01-01

    This article proposes to present a refl ection on the meanings constructed by the Brazilian written press regarding media and democracy. For this, it was necessary to recompose a specifi c journalistic event: the submission to the Brazilian Congress of a bill to create the Federal Journalism Council by the Brazilian President, Luiz Inácio Lula da Silva, at the request of the National Journalists Federation in August, 2004. This procedure gave rise to something rarely seen: the media were in the...

  9. Pocketbook of the economic press 1994

    International Nuclear Information System (INIS)

    Kroll, J.M.

    1994-01-01

    The present 34th edition of this pocketbook gives an overview of German economic journalists with their specific branches, important specialist newspaper editorial boards, the economic editors of the daily-, weekly- and public press, radio and television broadcusting stations as well as news-, information- and teletext services. In addition, 1600 public relations offices of industrial businesses, industry and trade chambers and universities are given. It concludes with information on authorities at a national and county level and more than 1200 business groups and leading bodies. (BWI) [de

  10. WordPress all-in-one for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2013-01-01

    Top WordPress guide, now fully updated for the latest WordPress release! This updated new edition comprises one of the largest collections of practical intermediate to advanced information on WordPress. Fully updated for the latest WordPress release, this in-depth book covers it all, from setting up your software to publishing your site, using SEO and social media, developing and using plug-ins, running multiple sites with WordPress, and more. Veteran author Lisa Sabin-Wilson is a top authority on WordPress, and she and her co-authors pack this book with essential and easy-to-follo

  11. Prevalência de níveis pressóricos elevados e fatores associados em adultos de Lages/SC Prevalencia de niveles de presión elevados y factores asociados en adultos de la ciudad de Lages/SC Prevalence of high blood pressure levels and associated factors among adults in Southern Brazil

    Directory of Open Access Journals (Sweden)

    Giana Zarbato Longo

    2009-10-01

    Full Text Available FUNDAMENTO: Poucos estudos de base populacional foram realizados em cidades de médio porte para estimar a prevalência de níveis pressóricos elevados e fatores associados. OBJETIVO: Estimar a prevalência dos níveis pressóricos elevados e fatores associados em adultos de Lages, SC. MÉTODOS: Estudo transversal de base populacional em adultos de 20 a 59 anos da zona urbana (n=2.022. A variável dependente foi nível pressórico elevado com valores > 140/90 mmHg. Variáveis independentes: sexo, idade, escolaridade, renda familiar per capita, cor da pele auto-referida, índice de massa corporal, tabagismo, problemas com álcool, atividade física, e diabete melito auto-referida. Para verificar as associações foi usado o teste de qui-quadrado e de tendência linear. A análise múltipla foi realizada por meio da regressão de Poisson RESULTADOS: A taxa de resposta foi de 98,6%. A prevalência de níveis pressóricos elevados foi de 33,7% (IC95% 31,7-36,1 para a população em geral variando de 31,1% nos homens a 38,1% nas mulheres. Após o ajuste por possíveis variáveis de confusão foram associados com nível pressórico elevado: indivíduos do sexo masculino (RP = 1,4 IC 95% 1,2-1,7, aqueles com idades mais avançadas (pFUNDAMENTO: Pocos estudios de base poblacional se llevaron a cabo en ciudades de porte medio para estimar la prevalencia de niveles de presión elevados y de factores asociados. OBJETIVO: Prevalencia de Niveles de Presión Elevados y Factores Asociados en Adultos de la ciudad de Lages, SC MÉTODOS: Estudio transversal de base poblacional en adultos de 20 a 59 años de la zona urbana (n=2.022. La variable dependiente fue un nivel de presión elevado con valores > 140/90 mgHg. Variables independientes: sexo, edad, escolaridad, renta familiar per capita, color de la piel auto-referida, índice de masa corporal, tabaquismo, problemas con alcohol, actividad física, y diabetes mellitus auto-referida. Se utilizó la prueba Chi

  12. Prevalência e fatores associados à pressão arterial elevada, seu conhecimento e tratamento em idosos no sul do Brasil Prevalencia y factores asociados a la presión arterial elevada, su conocimiento y tratamiento en ancianos en el sur de Brasil Prevalence and factors associated with high blood pressure, awareness, and treatment among elderly in Southern Brazil

    Directory of Open Access Journals (Sweden)

    Maruí Weber Corseuil Giehl

    2013-03-01

    Full Text Available O objetivo foi estimar a prevalência e investigar os fatores associados à pressão arterial elevada, seu conhecimento e tratamento em idosos de Florianópolis, Santa Catarina, Brasil. Trata-se de estudo transversal de base populacional e amostra complexa. A pressão arterial elevada foi definida pela medida do nível pressórico ou uso de anti-hipertensivo, ou diagnóstico prévio. A associação dos desfechos com as variáveis independentes foi verificada pela regressão de Poisson. Foram entrevistados 1.705 idosos. Desses, 84,6% apresentaram pressão arterial elevada, 77,5% estavam cientes da doença e 79,1% a tratavam. A prevalência associou-se à dependência funcional e idade e índice de massa corporal (IMC elevados. Idosos do sexo feminino, idade e IMC elevados, pior percepção em saúde e consulta médica recente estavam mais cientes da doença. O tratamento associou-se a sexo masculino, dependência funcional, pior percepção em saúde e consulta médica recente. Ainda que políticas públicas em saúde devam ser universais, é preciso considerar a desigual distribuição da pressão arterial elevada na população, direcionando-se ações de prevenção, diagnóstico e garantia de tratamento.El objetivo fue estimar la prevalencia e investigar los factores asociados a la presión arterial elevada, su conocimiento y tratamiento en ancianos de Florianópolis, Santa Catarina, Brasil. Se trata de un estudio transversal de base poblacional y muestreo complejo. La presión arterial elevada fue definida por la medida del nivel de presión sanguínea el uso de antihipertensivos, el diagnóstico previo. La asociación de los desenlaces con las variables independientes fue verificada por la regresión de Poisson. Se entrevistaron a 1.705 ancianos. De ellos, un 84,6% presentaron presión arterial elevada, un 77,5% eran conscientes de la enfermedad y un 79,1% la trataban. La prevalencia se asoció a la dependencia funcional y edad e índice de

  13. Freedom of Expression Laws and the College Press: Lessons Learned from the High Schools.

    Science.gov (United States)

    Paxton, Mark

    This paper examines two recent attempts to enact state freedom of expression laws for public college and university students and discusses the prospects for such laws in the context of state scholastic freedom of expression laws covering high school journalists in six states. It examines the case of Kincaid v. Gibson, which decided that…

  14. Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

    International Nuclear Information System (INIS)

    Valentine, T.M.; Sambell, R.A.J.

    1980-01-01

    Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive

  15. The press media and the risk perception

    International Nuclear Information System (INIS)

    Manetti, Cristiane Teixeira

    2009-01-01

    In this study it was identified the frequency of negative and positive news on the nuclear question in the press media. Due to the complexity of the matter, we opt to perform a study case that could illustrate the theoretical discussion presented in this research. Thus, due to the constant presence of news related to IPCC meeting, in the national and foreign press, we opt to focus our study on one year period just after the release of the 4th IPCC Report, in February of 2007. The research was centered only in the printed matters, since there is significant differences between the printed media and others, like TV, radio or web, restricting the use of the same bibliographical reference. In this study it was collected journalistic material involving the nuclear energy and was verified the predominant speech of the vehicles of communication and the sources of information. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in the paper. The negative approach almost always was assumed by the ONGs in general, as expected, due to the its well known position in the treatment of matters related to the nuclear energy. Also it is important to point out that all the tracked vehicles of information mixed positive and negative news articles on the subject; and evidences of hegemonic speech by official sources had been observed. (author)

  16. A CONCEPTUAL APPROACH ON PRESS CONFERENCE

    Directory of Open Access Journals (Sweden)

    Ioana Olariu

    2015-07-01

    Full Text Available A press conference is an important tool of public relations. The primary role of public relations is to manage a company’s reputation and help build public consent for its enterprises. The goal of PR is to develop and maintain goodwill with most, if not all, of its publics. Failure to do so may mean loss of customers and revenues, time lost dealing with complaints or lawsuits, and loss of esteem. A company’s publics change constantly. Well-executed public relations is an ongoing process that molds good long-term relationships and plays an important role in relationship marketing and integrated communications. Companies often call press conference when they have significant news to announce, such as the introduction of a new product or advertising campaign. Although used less often by organizations and corporations, this form of delivery can be very effective. The topic must be of major interest to a specific group before it is likely to gain coverage.

  17. Press Conference: LHC Restart, Season 2

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    PRESS BRIEFING ON THE LARGE HADRON COLLIDER (LHC) RE-START, SEASON 2 AT CERN, GLOBE OF SCIENCE AND INNOVATION Where :   http://cern.ch/directions   at the Globe of Science and Innovation When : Thursday, 12 March from 2.30 to 3.30pm - Open seating as from 2.15pm Speakers : CERN’s Director General, Rolf Heuer and Director of Accelerators, Frédérick Bordry, and representatives of the LHC experiments Webcast : https://webcast.web.cern.ch/webcast/ Dear Journalists, CERN is pleased to invite you to the above press briefing which will take place on Thursday 12 March, in the Globe of Science and Innovation, 1st floor, from 2.30 to 3.30pm. The Large Hadron Collider (LHC) is ready to start up for its second three-year run. The 27km LHC is the largest and most powerful particle accelerator in the world operating at a temperature of -217 degrees Centigrade and powered to a current of 11,000 amps. Run 2 of the LHC follows a two-year technical s...

  18. Bioactive properties of faveleira (Cnidoscolus quercifolius) seeds, oil and press cake obtained during oilseed processing.

    Science.gov (United States)

    Ribeiro, Penha Patrícia Cabral; Silva, Denise Maria de Lima E; Assis, Cristiane Fernandes de; Correia, Roberta Targino Pinto; Damasceno, Karla Suzanne Florentino da Silva Chaves

    2017-01-01

    To the best of our knowledge, this is the first report in the literature concerning the bioactive properties of faveleira products. This work focuses on the physicochemical evaluation of faveleira oil, as well as it investigates the bioactive properties of faveleira seeds, faveleira oil and the press cake obtained during the oilseed processing. The seeds were cold pressed and the following tests were performed: physicochemical characteristics (acidity, peroxide values, moisture and volatile matter, density and viscosity) and fatty acid profile of faveleira oil; total phenolic and flavonoid content of faveleira seed and press cake; antibacterial activity of seed, oil and press cake; and antioxidant activity (DPPH radical scavenging activity, reducing power assay, total antioxidant capacity, superoxide radical scavenging assay and oxygen radical absorbance capacity) of seed, oil and press cake. Our work demonstrated that the faveleira seed oil has low acidity (0.78 ± 0.03% oleic acid) and peroxide value (1.13 ± 0.12 mEq/1000g), associated with the relevant concentration of linoleic acid (53.56%). It was observed that important phenolics (398.89 ± 6.34 mg EAG/100 g), especially flavonoids (29.81 ± 0.71 mg RE/g) remain in the press cake, which indicates that the by-product of the faveleira oilseed production constitutes a rich residual source of bioactive compounds. No bacterial growth inhibition was detected, but all samples including faveleira seeds, press cake, oil and its fractions have potent antioxidant activities, mainly the press cake, with oxygen radical absorbance capacity of 28.39 ± 4.36 μM TE/g. Our results also show that faveleira oil has potential to be used as edible oil and the press cake should be used to contain the most antioxidants from seed.

  19. Associação entre dois diferentes tipos de estrangulamento com a variação da pressão intraocular em atletas de jiu-jitsu Association between two different types of strangling and intraocular pressure variation in jiu-jitsu athletes

    Directory of Open Access Journals (Sweden)

    Marinho Jorge Scarpi

    2009-06-01

    Full Text Available OBJETIVO: Verificar a associação entre dois diferentes tipos de estrangulamento com a variação da pressão intraocular em atletas de jiu-jitsu. MÉTODO: Estudo observacional em grupo de 9 atletas de jiu-jitsu, com mínimo 6 meses de treinamento, sexo masculino, idades entre 20 e 30 anos, sem presença de lesões físicas e do bulbo ocular. Buscou-se associação entre a variação da pressão intraocular e os estrangulamentos Frontal da Guarda (E1 e Frontal da Montada (E2. A pressão intraocular foi determinada com o tonômetro de Perkins, inicialmente sem que o atleta tivesse realizado atividade física nas 24 horas antecedentes e após cada golpe. Realizou-se medidas da pressão intraocular por 12 minutos, uma a cada 3 minutos de recuperação (R1; R2; R3; R4, com o indivíduo deitado. Como procedimento estatístico foi empregado o teste ANOVA e o pós-teste de Bonferroni. RESULTADOS: Ocorreu redução significativa da pressão intraocular em ambos os olhos durante a situação E2 comparada a E1 em todos os momentos da aferição de recuperação: R1 (OD: 8,22 ± 1,39 vs.11,33 ± 2,00 / OE: 8,55 ± 1,23 vs. 11,88 ± 1,90, R2 (OD: 8,44 ± 1,87 vs.10,22 ± 2,53 / OE: 9,00 ± 1,80 vs. 10,44 ± 2,35, R3 (OD: 8,44 ± 1,74 vs.9,78 ± 2,54 / OE: 8,55 + 1,42 vs. 10,33 ± 1,93 todos com pPURPOSE: To verify the association between two different types of strangling with intraocular pressure variation in jiu-jitsu athletes. METHODS: An observational study was performed on 9 athletes of jiu-jitsu, with at least 6 month of training, male, aged 20 to 30 years, without any physical and eyeball lesions. Associations between intraocular pressure and Cross Choke from the guard strangling (E1, and E2 - Cross Choke from mount strangling were gotten. Intraocular pressure was determined by using Perkins tonometer, at first in the absence of physical exercise over the last 24 hours and after each strangling. Then it was carried out the intraocular pressure

  20. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    Directory of Open Access Journals (Sweden)

    Silvia Simone

    2016-01-01

    Full Text Available Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids, whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride (PVDF hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM. Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP. Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m2·h·bar, coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m2·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively.

  1. Searching for a Free Press in Indian Country.

    Science.gov (United States)

    Benton, Sherrole

    1994-01-01

    Describes the tribally controlled media's efforts to provide a form of checks and balances against the tribal council on behalf of the tribal community. Examines the issue of freedom of the tribal press, suggesting that tribal council's control of press's operating funds may limit press freedom. (MAB)

  2. Controlling for Prior Attainment Reduces the Positive Influence that Single-Gender Classroom Initiatives Exert on High School Students' Scholastic Achievements.

    Science.gov (United States)

    Pennington, Charlotte R; Kaye, Linda K; Qureshi, Adam W; Heim, Derek

    2018-01-01

    Research points to the positive impact that gender-segregated schooling and classroom initiatives exert on academic attainment. An evaluation of these studies which reveal positive effects highlights, however, that students are typically selectively assigned to single- or mixed-gender instructional settings, presenting a methodological confound. The current study controls for students' prior attainment to appraise the efficacy of a single-gender classroom initiative implemented in a co-educational high school in the United Kingdom. Secondary data analysis (using archived data) was performed on 266 middle-ability, 11-12 year-old students' standardized test scores in Languages (English, foreign language), STEM-related (Mathematics, Science, Information and Communication Technology), and Non-STEM subjects (art, music, drama). Ninety-eight students (54, 55% female) were taught in single-gender and 168 (69, 41% female) in mixed-gender classrooms. Students undertook identical tests irrespective of classroom type, which were graded in accordance with U.K national curriculum guidelines. Controlling for students' prior attainment, findings indicate that students do not appear to benefit from being taught in single-gender relative to mixed-gender classrooms in Language and STEM-related subjects. Young women benefitted from being taught in mixed-gender relative to single-gender classes for Non-STEM subjects. However, when prior ability is not controlled for, the intervention appears to be effective for all school subjects, highlighting the confounding influence of selective admissions. These findings suggest that gender-segregated classroom initiatives may not bolster students' grades. It is argued that studies that do not control for selection effects may tell us little about the effectiveness of such interventions on scholastic achievement.

  3. STS-114: Discovery Launch Readiness Press Conference

    Science.gov (United States)

    2005-01-01

    Michael Griffin, NASA Administrator; Wayne Hale, Space Shuttle Deputy Program Manager; Mike Wetmore, Director of Shuttle Processing; and 1st Lieutenant Mindy Chavez, Launch Weather Officer-United States Air Force 45th Weather Squadron are in attendance for this STS-114 Discovery launch readiness press conference. The discussion begins with Wayne Hale bringing to the table a low level sensor device for everyone to view. He talks in detail about all of the extensive tests that were performed on these sensors and the completion of these ambient tests. Chavez presents her weather forecast for the launch day of July 26th 2005. Michael Griffin and Wayne Hale answer questions from the news media pertaining to the sensors and launch readiness. The video ends with footage of Pilot Jim Kelly and Commander Eileen Collins conducting test flights in a Shuttle Training Aircraft (STA) that simulates Space Shuttle landing.

  4. Idealized Compression Ratio for a Screw Briquetting Press

    Directory of Open Access Journals (Sweden)

    Peter Biath

    2012-01-01

    Full Text Available This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.

  5. Properties of hot pressed MgB2/Ti tapes

    International Nuclear Information System (INIS)

    Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.

    2009-01-01

    Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.

  6. #Me_Who: Anatomy of Scholastic, Leadership, and Social Isolation of Underrepresented Minority Women in Academic Medicine.

    Science.gov (United States)

    Albert, Michelle A

    2018-05-22

    In academic medicine, under-represented minority women physician-scientists (URMWP)* are uncommon, particularly in leadership positions. Data from the American Association of Medical Colleges (AAMC) show that among internal medicine chairs, there are 12 Asian males, 10 African/American (blacks; 9 men), 7 Hispanics (2 females) and 137 whites (21 females). In the top 40 ranked cardiology programs, there are no female cardiology chiefs, whereas there are at least 10, 2, 1 and 24 Asian, black, Hispanic and white males respectively. There are more URMWP than URM males, yet URMWP are less likely to be professors and occupy leadership positions in academia. Specifically, among United States medical school faculty, relative proportions at assistant, associate and full professor levels according to race/ethnicity and gender have remained essentially unchanged over the past 20 years. AAMC information demonstrates that only 11%, 9%, 11% and 24% of Asian, black, Hispanic and white women are full professors compared with 21%, 18%, 19% and 36% of Asian, black, Hispanic and white men. Additionally, while there are representative proportions of women and Asians at the lowest faculty levels, they have not equitably progressed in academic medicine, likely reflecting discrimination and structural/organizational barriers that are also applicable to black and Hispanic females 1 .

  7. Void formation in ODS EUROFER produced by hot isostatic pressing

    International Nuclear Information System (INIS)

    Ortega, Y.; Monge, M.A.; Castro, V. de; Munoz, A.; Leguey, T.; Pareja, R.

    2009-01-01

    Positron annihilation experiments were performed on oxide dispersion strengthened (ODS) and non-ODS EUROFER prepared by mechanical alloying and hot isostatic pressing. The results revealed the presence of small voids in these materials in the as-HIPed conditions. Their evolution under isochronal annealing experiments was investigated. The coincidence Doppler broadening spectra of ODS EUROFER exhibited a characteristic signature attributed to positron annihilation in Ar-decorated voids at the oxide particle/matrix interfaces. The variation of the positron annihilation parameters with the annealing temperature showed three stages: up to 623 K, between 823 and 1323 K, and above 1323 K. In the temperature range 823-1323 K void coarsening had effect. Above 1323 K some voids annealed out, but others, associated to oxide particles and small precipitates, survived to annealing at 1523 K. Transmission electron microscopy observations were also performed to verify the characteristics of the surviving defects after annealing at 1523 K.

  8. Void formation in ODS EUROFER produced by hot isostatic pressing

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, Y. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)], E-mail: yanicet@fis.ucm.es; Monge, M.A. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Castro, V. de [Department of Materials, University of Oxford, Oxford OX1 3PH (United Kingdom); Munoz, A.; Leguey, T.; Pareja, R. [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)

    2009-04-30

    Positron annihilation experiments were performed on oxide dispersion strengthened (ODS) and non-ODS EUROFER prepared by mechanical alloying and hot isostatic pressing. The results revealed the presence of small voids in these materials in the as-HIPed conditions. Their evolution under isochronal annealing experiments was investigated. The coincidence Doppler broadening spectra of ODS EUROFER exhibited a characteristic signature attributed to positron annihilation in Ar-decorated voids at the oxide particle/matrix interfaces. The variation of the positron annihilation parameters with the annealing temperature showed three stages: up to 623 K, between 823 and 1323 K, and above 1323 K. In the temperature range 823-1323 K void coarsening had effect. Above 1323 K some voids annealed out, but others, associated to oxide particles and small precipitates, survived to annealing at 1523 K. Transmission electron microscopy observations were also performed to verify the characteristics of the surviving defects after annealing at 1523 K.

  9. Techniques for hot-press-bonding dissimilar metal combinations

    International Nuclear Information System (INIS)

    Watson, R.D.

    1966-05-01

    High strength diffusionless bonds can be produced in a variety of dissimilar metal combinations by the hot press bonding technique covered by Canadian Patent application 904,548 June 6, 1964. Some of the combinations that can be joined successfully are Zircaloy-2 and 416 stainless steel, 416 stainless steel and mild steel, 1S aluminum and mild steel, Zircaloy-2 and M257 SAP, and Zircaloy-2 and 1S aluminum. Several other combinations were attempted but suitable joints could not be produced. The methods of producing the joints, the joint strength that can be developed and a discussion of some of the problems associated with making the joints are included in the report. (author)

  10. Treatment of the press residues of pressed grapes on an industrial scale

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-24

    EtOH and tartaric acid are recovered from press residues of grapes by distillation and concentration of the EtOH and extraction of the dried residue after removal of seeds with a mixture of H/sub 2/O and mineral acid. Vegetable oil is extracted from the seeds. Collidal substances are coagulated by roasting prior to extraction of tartaric acid. The grape skins are recovered in flake form.

  11. Press conference of the 15 october 2002; Conference de presse du 15 octobre 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  12. Hot isostatic press waste option study report

    International Nuclear Information System (INIS)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065

  13. [Work disability in public press professions].

    Science.gov (United States)

    Akermann, S

    2002-09-01

    In this study more than 1,000 cases of long-term disability among members of the press and media were evaluated. Mental disorders were the main cause of disability in almost every fourth case. In women psychiatric illnesses were even more important. The most common diagnosis was that of a depressive disorder which accounted for more than half of all psychiatric cases. The causes of disability of other insurance systems such as the German social security scheme and the pension and disability plan for the medical profession were compared. Mental illnesses are the leading cause of disability in white collar workers and orthopaedic illnesses, especially disorders of the vertebral column, are the leading cause in blue collar workers, as one might have expected. In females mental disorders are even more common than in men whereas men tend to have more cardiovascular problems than women. In this study also some interesting features regarding disability caused by various illnesses after long-term follow-up were found. This opens unknown perspectives allowing new assessment of diseases and eventually will enable the actuary to price medical diagnoses for disability insurance.

  14. Pressing problems of measurement of ionizing radiations

    International Nuclear Information System (INIS)

    Fominykh, V.I.; Yudin, M.F.

    1993-01-01

    The current system for ensuring the unity of measurements in the Russian Federation and countries of the former Soviet Union ensures a high quality of dosimetric, radiometric, and spectrometric measurements in accordance with the recommendations of the Consulative Committee on Standards for Measurements of Ionizing Radiations of the International Bureau of Weights and Measures (IBWM), International Organization on Radiological Units (ICRU), International Commission on Radiological Protection (ICRP), International Organization on Legislative Metrology (IOLM), International Atomic Energy Agency (IAEA), World Health Organization (WHO), etc. Frequent collation of the national primary and secondary standards of Russia with those of IBWM and the leading national laboratories of the world facilitate mutual verification of the measurements of ionizing radiations. The scope of scientific and scientific-technical problems that can be solved by using ionizing radiations has expanded significantly in recent years. In this paper the authors consider some pressing problems of the metrology of ionizing radiations which have arisen as a result of this expansion. These include the need for unity and reliability of measurements involved in radiation protection, the measurement of low doses involving low dose rates, ensuring the unity of measurements when monitoring the radiological security of the population, the need for more uniformity on an international scale regarding the basic physical quantities and their units for characterizing radiation fields, determination of the accuracy of measurement of the radiation dose absorbed by an irradiated tissue or organ, and the development of complex standards for ionizing radiations. 5 refs., 1 tab

  15. Hot isostatic press waste option study report

    Energy Technology Data Exchange (ETDEWEB)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  16. Efeito da associação entre obesidade neuroendócrina e exócrina experimental sobre a pressão arterial de cauda e o metabolismo de glicose de ratos Wistar Effects of the association of experimental neuroendocrine and exocrine obesity on tail blood pressure and glucose metabolism in Wistar rats

    Directory of Open Access Journals (Sweden)

    Andréa Paula Pastore

    2010-06-01

    Full Text Available OBJETIVO: Estudar dois modelos de obesidade, exócrina e endócrina, e sua associação sobre a pressão arterial de cauda (PAC, o peso corporal (PC, o metabolismo glicídico (ISI e gordura epididimal relativa (GER. MÉTODOS: Foram estudados ratos machos da cepa Wistar. O grupo MSG recebeu glutamato monossódico no período neonatal. Aos 3 meses de idade parte desses animais passou a receber dieta cafeteria (CAF. Os animais receberam controle salina no período neonatal. Durante 12 semanas foram pesados (PC e tiveram a pressão arterial de cauda (PAC aferida. O Teste de Tolerância Oral à Glicose foi realizado e o Índice de Sensibilidade à Insulina (ISI, calculado. O peso ventricular relativo (PVR e a gordura epididimal relativa (GER também foram calculados. RESULTADOS: Não se verificou alterações no PC e na PAC. A obesidade induzida pela administração de MSG e CAF, isoladamente, promoveu aumento da resistência à insulina (WST = 23,25 ± 9,31; CAF = 15,92 ± 9,10*; MSG = 13,41 ± 3,84* mg-1mU-1, p OBJECTIVE: To study two different models of obesity, exocrine and endocrine, and its association on tail arterial pressure (TAP, body weight (BW, glucose metabolism and visceral fat content. METHODS: Male Wistar rats were studied. The MSG group was composed by rats that received of MSG in neonatal period. At the 3rd month of life, part of these animals received cafeteria diet. Animals received saline control in the neonatal period. In the 12 weeks of study, body weight and blood pressure were measured twice a week. In the end of this period on, Oral Glucose Tolerance Test (OGTT was performed and the Insulin Sensitivity Index (ISI was calculated, also the left Relative Ventricular Weight (RLW and Relative Epididimal Fat Weight (REFW were obtained. RESULTS: No changes on BW and TAP were verified. The obesity induced by MSG and CAF, individually, let to increases on insulin resistance (WST = 23,25 ± 9,31; CAF = 15,92 ± 9,10*; MSG = 13,41 ± 3

  17. Discriminant analysis of essay, mathematics/science type of essay, college scholastic ability test, and grade point average as predictors of acceptance to a pre-med course at a Korean medical school.

    Science.gov (United States)

    Jeong, Geum-Hee

    2008-01-01

    A discriminant analysis was conducted to investigate how an essay, a mathematics/science type of essay, a college scholastic ability test, and grade point average affect acceptance to a pre-med course at a Korean medical school. Subjects included 122 and 385 applicants for, respectively, early and regular admission to a medical school in Korea. The early admission examination was conducted in October 2007, and the regular admission examination was conducted in January 2008. The analysis of early admission data revealed significant F values for the mathematics/science type of essay (51.64; Pgrade point average (10.66; P=0.0014). The analysis of regular admission data revealed the following F values: 28.81 (Pgrade point average, 27.47 (P<0.0001) for college scholastic ability test, 10.67 (P=0.0012) for the essay, and 216.74 (P<0.0001) for the mathematics/science type of essay. Since the mathematics/science type of essay had a strong effect on acceptance, an emphasis on this requirement and exclusion of other kinds of essays would be effective in subsequent entrance examinations for this premed course.

  18. Hot pressing of B4C/SiC composites

    International Nuclear Information System (INIS)

    Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O.

    2005-01-01

    B 4 C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B 4 C/SiC composite samples were lower than monolithic B 4 C in all experimental conditions. (authors)

  19. Auxiliary equipment and special techniques used for hot isostatic pressing

    International Nuclear Information System (INIS)

    Pfeffer, J.B.; Odebo, U.

    1977-01-01

    The largest use for hot isostatic pressing (HIP) in production is in the consolidation of powder. In principle, powder is filled into a capsule of metal or glass, and the capsule is evacuated, sealed and loaded into the hot isostatic press. Consolidation takes place in the hot isostatic press, at which time the consolidated capsule is removed from the press and the encapsulation material is removed from the consolidated powder body. In both densification and defect healing, HIP is carried out without encapsulating the material. This is possible as the materials that lend themselves to HIP healing initially have a high density without communicating pores; therefore, the material acts as its own capsule. Considerations outside of the hot isostatic press that must be taken into account are examined. Information is included on powder manufacture, fabrication of capsules, powder handling, capsule sealing, and loading and unloading the press

  20. High density high-TC ceramic superconductors by hot pressing

    International Nuclear Information System (INIS)

    Mak, S.; Chaklader, A.C.D.

    1989-01-01

    High density and high T C superconductor specimens, YBa 2 Cu 3 O x , have been produced by hot-pressing. The factors studied are the effect of hot pressing on the density, the oxygen stoichiometry, the crystal structure, and the critical temperature. Hot pressing followed by heat treatment increased the density of the specimen to 93%. The hot pressing itself did not significantly affect the oxygen content in the specimen, and although the crystal structure appeared to be orthorhombic, the specimens were not superconducting above liquid nitrogen temperature. The superconductivity was restored after head treatment in oxygen. The highest critical temperature (T C ) of the hot pressed pellets was 82K, which was slightly lower than the T C that could be obtained with the cold pressed/sintered pellets. (6 refs., 5 figs., tab.)

  1. Direct drive digital servo press with high parallel control

    Science.gov (United States)

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  2. Muscle activation when performing the chest press and shoulder press on a stable bench vs. a Swiss ball.

    Science.gov (United States)

    Uribe, Brandon P; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Nguyen, Diamond

    2010-04-01

    The aim of this study was to examine the effects of a stable surface (bench) vs. an unstable surface (Swiss ball) on muscle activation when performing the dumbbell chest press and shoulder press. Sixteen healthy men (24.19 +/- 2.17 years) performed 1 repetition maximum (1RM) tests for the chest press and shoulder press on a stable surface. A minimum of 48 hours post 1RM, subjects returned to perform 3 consecutive repetitions each of the chest press and shoulder press at 80% 1RM under 4 different randomized conditions (chest press on bench, chest press on Swiss ball, shoulder press on bench, shoulder press on Swiss ball). Electromyography was used to assess muscle activation of the anterior deltoid, pectoralis major, and rectus abdominus. The results revealed no significant difference in muscle activation between surface types for either exercise. This suggests that using an unstable surface neither improves nor impairs muscle activation under the current conditions. Coaches and other practitioners can expect similar muscle activation when using a Swiss ball vs. a bench.

  3. Legal Protection To The Infotainment Of Press Development In Indonesia

    Directory of Open Access Journals (Sweden)

    Anwar Fuadi

    2015-08-01

    Full Text Available Abstract In the socio-political life the press has become an integral part in democratic life. The press has become one of the means for citizens to bring their thoughts and opinions. Nowadays there is a tendency to increase the quantity of press publications sharp but not accompanied by a statement of the quality of journalism. The objective of this research is to understand the essence of the infotainment liability as a mass media in order to construct a freedom of the press principle which has legitimacy within the legal system of the press in Indonesia. The type of research used in this paper is normative research or also known as doctrinal research by reviewing the legal protection to the infotainment as a mass media in Indonesia. The outcomes of the research indicate that the role of infotainment in the legal system of the press in Indonesia refers to the legal construction of institutional and infotainment organizers itself. Legal liability of Infotainment essentially can be seen from the press obligations stipulated in the Law No. 40 of 1999 regarding the Press Law No. 32 of 2002 regarding Broadcasting as well as the Journalists Code of Ethics which support freedom of the press and expression.

  4. The small academic press in the land of giants

    Directory of Open Access Journals (Sweden)

    Frances Pinter

    2015-11-01

    Full Text Available Mergers and acquisitions, for example the merger of Macmillan Science and Education with Springer Science+Business Media, might suggest that large is the future for academic publishing.  It might seem that giant players will dominate the future of scholarly publishing, but, at the same time, this year has seen the launch of UCL Press, the University’s in-house publishing arm. Goldsmiths, University of London, has also announced it is preparing to launch Goldsmiths Press, a new university press built on digital-first publishing, especially around unconventional projects traditionally excluded by publishers. Some of the more established university presses also seem to be increasing their scope. For example, Stanford University Press launched a new trade imprint and Manchester University Press has announced it has acquired forward titles from Bloomsbury Publishing.  'Insights 'asked two experts if there really is scope for the small academic press in the modern scholarly publishing environment. Frances Pinter has provided the perspective of the small university press. She is realistic about the challenges small academic publishers face, but concludes that there is space and opportunity for them to coexist with the giants. Michael Magoulias is equally realistic about the challenges of small, but sees the university press as a necessary, not to say, vital, alternative to commercial publishing.

  5. WordPress all-in-one for dummies

    CERN Document Server

    Sabin-Wilson, Lisa; Palmer, Kevin

    2011-01-01

    A convenient how-to guide for maximizing your WordPress experience. WordPress is a state-of-the-art blog publishing platform with nearly ten million active installations. Eight minibooks provide you with expanded coverage of the most important topics to the WordPress community, such as WordPress basics, theme designs, plug-in development, social media integration, SEO, customization, and running multiple sites. Veteran author Lisa Sabin-Wilson leads an authoritative team of authors who offer their unique knowledge and skillset while sharing invaluable advice for maximizing your site's potentia

  6. Effects of pressing temperature and initial microstructure on the equal channel angular pressing of Ti-6Al-4V alloy

    International Nuclear Information System (INIS)

    Ko, Y.G.; Lee, Y.H.; Jung, W.S.; Shin, D.H.; Lee, C.S.

    2003-01-01

    The effects of pressing temperature and initial microstructure on the equal channel angular (ECA) pressing of Ti-6Al-4V alloy were investigated in this study. The ECA pressing was carried out isothermally with route C at 500 C, 600 C and 700 C for two typical microstructures, i.e., the Widmanstaetten microstructure and the equiaxed microstructure. The results showed that ECA pressing at 600 C and 700 C was successful without producing any noticeable segment at the specimen surfaces, while a large amount of surface segments were produced at 500 C. After 1 pass pressing at 600 C, the equiaxed microstructure showed more uniform material flow at the surface than the Widmanstaetten microstructure. However, this microstructural influence was diminished with increase of the number of the ECA pressing. A flow-localization parameter that quantifies the flow non-uniform tendency in case of flow softening materials was used to explain the different results in each microstructure. (orig.)

  7. The LNG industry in 2011. Press revue

    International Nuclear Information System (INIS)

    2012-05-01

    The outlook of the LNG industry in 2011 is presented as a revue of press articles: The role of LNG as a flexible and secure energy source as well as the prompt response to provide back-up through additional supplies and cargo diversions to compensate for the sudden loss of nuclear capacity in Japan - with sellers exercising due price restraint in view of the human tragedy - has been a credit to the industry. The increase in production capacity in 2009 and 2010, in particular from Qatar, had permitted the necessary buffer to cope much better with the demand surge than during past disruptions (such as the aftermath of the Chuetsu earthquake in late 2007). Undoubtedly, the marked shift over the last decade in the industry's prevailing business model towards global trade, destination flexibility and portfolio play has also facilitated the rapid response. As the total volume of LNG trade is very much determined by the availability of supply, 2011 has seen a growth of 9.4% over 2010, mainly as a result of the full availability of the six Qatar mega-trains over the past year. On the demand side the two traditional basins have shown very contrasting trends: 15% higher LNG off-take in Asia (the five major markets all increasing between 37.4% and 8.9%), versus a 1.7% decrease in the Atlantic Basin. Cargo diversions and an increasing number of reloads have boosted the exports from the Atlantic Basin to Asia in 2011 to more than 14 million tons (equivalent to more than 200 large size cargoes). Remarkable is also the fast growth in new markets in Latin America and in the Middle East - albeit from a small base - with counter-seasonal but varying demand, offering attractive arbitrage opportunities to portfolio play. Not surprising then that 2011 has seen another hike in spot and short-term trade, not just in absolute terms but also as a percentage of total trade (50% over 2010, 25.4% of total trade). The outlook for LNG is strong and its global demand prospects further

  8. Principal's Guide to Scholastic Journalism.

    Science.gov (United States)

    Quill and Scroll Foundation, Iowa City, IA.

    School media serve as communication links within the school, but they are much more than simple house organs. They are unique and their reasons for being must spring from the educational goals that an individual school system sets for itself. This guide is intended as an attempt to assess the general practices and attitudes regarding scholastic…

  9. LANGUAGE THERAPY FOR SCHOLASTIC UNDERACHIEVERS.

    Science.gov (United States)

    ZEDLER, EMPRESS Y.

    NEUROLOGICALLY HANDICAPPED CHILDREN OF NORMAL INTELLIGENCE CAN BE HELPED TO IMPROVE THEIR ACADEMIC ACHIEVEMENT THROUGH LANGUAGE THERAPY. A 2-YEAR STUDY SUGGESTED NOT ONLY THAT THIS STATEMENT IS TRUE BUT ALSO THAT SIGNIFICANTLY GREATER IMPROVEMENT COMES IN SITUATIONS WHERE THESE STUDENTS ARE PERMITTED TO REMAIN IN REGULAR CLASSROOMS AND TO RECEIVE…

  10. Press briefing on results from the solar spacecraft SOHO

    Science.gov (United States)

    1998-04-01

    After its launch on 2 December 1995, SOHO travelled to take up a special orbit 1.5 million kilometres away on the sunward side of the Earth, where the Sun never sets. The full scientific programme began in April 1996. The occasion for the briefing is the celebration of that second anniversary and of the mission's extension to 2003. Organized by the European Space Agency, the briefing will be hosted by the Rutherford Appleton Laboratory, which is near Oxford. Leading scientists associated with SOHO will announce to the press some remarkable new discoveries about the Sun's interior, atmosphere and solar wind. They will also briefly review the main achievements of the past two years. The role of SOHO as the chief watchdog for storms on the Sun that may affect the Earth will be demonstrated. Europe's creation of the finest spacecraft ever built to observe the Sun will be recalled by a top engineer from ESA. A speaker from NASA will explain transatlantic contributions to SOHO, which is a project of international cooperation between ESA and NASA. ESA's director of science will also be present, to relate SOHO to ESA's general science programme. A lunch-time talk by the BNSC's director of science completes the line-up of speakers. This is also an exceptional opportunity for the press to meet and interview scientists from all over Europe and the USA, who are attending a meeting at the Rutherford Appleton Laboratory of SOHO's Science Working Team (SWT). Journalists are usually excluded from such meetings. The Rutherford Appleton Laboratory plays a prominent part in SOHO, particularly through its provision of the CDS ultraviolet spectrometer. A visit to the CDS group will provide a chance to see what space research is really like. Please indicate your intention to attend, on the accreditation form that follows the schedule. Guidance on how to get to the Rutherford Appleton Laboratory is appended. PROGRAMME Rutherford Appleton Laboratory (RAL), 28 April 1998 10:30 Assembly of

  11. Press touch code: A finger press based screen size independent authentication scheme for smart devices

    Science.gov (United States)

    Ranak, M. S. A. Noman; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z.

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)—a.k.a., Force Touch in Apple’s MacBook, Apple Watch, ZTE’s Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on—is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme. PMID:29084262

  12. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Science.gov (United States)

    Ranak, M S A Noman; Azad, Saiful; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  13. Densification of boron carbide at relatively low temperatures by hot pressing and hot isostatic pressing

    International Nuclear Information System (INIS)

    Telle, R.

    1988-01-01

    The poor sinterability of B 4 C limits its widespread application because both high temperatures and high pressures are required for a complete densification. Moreover, B 4 C suffers from a low strength and fracture toughness, possesses, however, a high potential because of its extreme hardness. Reaction hot pressing of B 4 C-WC-TiC-Si-Co mixtures resulting in B 4 C-TiB 2 -W 2 B 5 composites of high density exhibit remarkable mechanical properties. The influence of hot isostatic pressing (HIP) on the microstructure and the mechanical properties is investigated in cooperation with participants of the COST 503 activities and related to the strengthening and toughening mechanisms. Difficulties during densification by HIP arise from the evaporation of adsorbed volatiles as well as from the strong swelling of the powder compact due to the sintering reaction. Several HIP cycle designs were tested in order to prevent the bloating of the capsule and to control internal stresses due to the misfit of the thermal expansion of the entire phases. In comparison to single phase B 4 C ceramics, bending strength was improved to 1030 MPa, K Ic to 5.2 MPa/m, while hardness was comparable with HV1=38 GPa. Wear test were performed and related to the toughening mechanisms. (orig.) With 56 refs., 9 tabs., 64 figs

  14. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Directory of Open Access Journals (Sweden)

    M S A Noman Ranak

    Full Text Available Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC. We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  15. An analysis method of the press information related with the nuclear activity in Argentina

    International Nuclear Information System (INIS)

    Alsina, Griselda.

    1989-01-01

    The articles published by the newspapers during the year 1987 were analyzed and classified according to their contents. An attribute was assigned to each article (positive, negative or neutral) in agreement with its connotation regarding the nuclear activity in Argentina. An ISIS base system was developed using these data. The purpose of this analysis was to evaluate the influence of the press in the public opinion. The relation between the different variables show the importance and approach (environmental, technico-scientifical or political) given by the press to the different subjects. The results show a general lack of knowledge about nuclear activities and a concern among the readers associated with the environmental risks, which calls for the need to develop an information program for the community. The fundamentals of this program should improve the organization in order to make the information reach the external demands, to promote educational programs and to continuously provide information to the press. (S.M.) [es

  16. Atlas of hot isostatic beryllium powder pressing diagrams

    International Nuclear Information System (INIS)

    Stoev, P.I.; Papirov, I.I.; Tikhinskij, G.F.; Vasil'ev, A.A.

    1995-01-01

    Diagrams of hot isotopic pressing (HIP) of beryllium powder with different grain size in a wide range of pressing parameters are built by mathematical modeling methods. The HIP diagrams presented are divided into 3 groups: parametric dependencies D=f(P,T); technological HIP diagrams; compacting mechanisms. The created data bank permits to optimise beryllium powder HIP with changing parameters. 4 refs., 23 figs

  17. Simulation Model of Automated Peat Briquetting Press Drive

    Directory of Open Access Journals (Sweden)

    A. A. Marozka

    2012-01-01

    Full Text Available The paper presents the developed fully functional simulation model of an automated peat briquetting press drive. The given model makes it possible to reduce financial and time costs while developing, designing and operating a double-stamp peat briquetting press drive.

  18. Criticism of the Press: Its Social, Psychological and Political Origins.

    Science.gov (United States)

    Becker, Lee B.; And Others

    This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…

  19. Design, manufacture and performance research of double acting hydraulic press

    OpenAIRE

    Koc, Erdem; Unver, Ertu; Ozturk, Hidayet

    1990-01-01

    This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)

  20. New Realities for Scholarly Presses in Trying Economic Times

    Science.gov (United States)

    Blakesley, David

    2014-01-01

    The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

  1. News from the Library: PressDisplay on mobile devices!

    CERN Multimedia

    CERN Library

    2013-01-01

    You are probably already using PressDisplay to read newspapers online, but for those of you who are not yet aware of this service, PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published.   Whether you are an experienced user or a beginner, we have good news concerning PressDisplay: our license now permits you to download complete newspaper issues to your mobile devices and read them offline wherever you like. To do that, you have to use the mobile app PressReader. Instructions on how to install the PressReader app are available here: For Ipad For Android smartphone For Android tablet For Windows 8 devices For BlackBerry Playbook For Android eReader Your feedback is welcome! Please contact us by e-mail.

  2. Predictor of regulation of uranium dioxide powder pressing process

    International Nuclear Information System (INIS)

    Motta, Eduardo Souza; Araujo, Victor Hugo Leal de; Bernardelli, Sergio Henrique

    2007-01-01

    One of the most important steps of the uranium dioxide pellets fabrication used in the nuclear fuel elements is the green pellets pressing. The target density of the pellets after the sintering process determines the density of the green pellet. To meet the same sintered target density the green density may vary according to the powder characteristics. These variations implies in changing the regulation of the press for different powder's patches. The regulation done empirically imply in productivity loss and necessity of reprocessing the pellets pressed during the press regulation and also depends on the operator experience. At this work, was developed an artificial neural network feed forward back propagation to predict the press regulation, depending on the powder characteristics and the green pellet's target density. The results obtained at INB - Industrias Nucleares do Brasil S. A. during the fabrication of the fifth recharge of Angra II nuclear power plant are presented. (author)

  3. Normalized knee-extension strength or leg-press power after fast-track total knee arthroplasty

    DEFF Research Database (Denmark)

    Aalund, Peter K; Larsen, Kristian; Hansen, Torben Bæk

    2013-01-01

    OBJECTIVE: (s): To investigate which of the two muscle-impairment measures for the operated leg, normalized knee extension strength or leg press power, is more closely associated to performance-based and self-reported measures of function shortly following total knee arthroplasty (TKA). DESIGN...... and dynamic leg presses to determine their body-mass normalized knee extension strength and leg press power, respectively. The 10-m fast speed walking and 30-s chair stand tests were used to determine performance-based function, while the Western Ontario McMaster University Osteoarthritis Index (WOMAC......) and Oxford Knee scores were used to determine self-reported function. RESULTS: Normalized leg press power was more closely associated to both performance-based (r=.82, P...

  4. How to press-release and take care of expression in articles at press side

    International Nuclear Information System (INIS)

    Hamamoto, Kazuko; Narabayashi, Tadashi; Kobayashi, Masahide; Akizuki, Teruo; Onishi, Hidetoshi

    2008-01-01

    As for the influences of Chuetsu-Oki Earthquake on Kashiwazaki-Kariwa Nuclear Power Station, we can conclude that 'the safety function of the nuclear power station, that is, 'Shutdown', 'Cooling down' and 'Isolating' functioned as per designed even against earthquake beyond assumption, and fundamental nuclear safety could be assured'. Nevertheless, it is said that one of the causes that harmful rumor had spread was due to mass communication media. In the press reports on some nuclear power station when affected by an earthquake and on trouble in the nuclear power station in the future, we will propose that the publication should be really useful for habitants and citizens and be promoted in the positive and expected direction, in order not to make the same mistake as this time. JSME should aim at implement the above-mentioned proposal under cooperation with other academic societies and organizations. (author)

  5. Men exhibit greater fatigue resistance than women in alternated bench press and leg press exercises.

    Science.gov (United States)

    Monteiro, Estêvão R; Steele, James; Novaes, Jefferson S; Brown, Amanda F; Cavanaugh, Mark T; Vingren, Jakob L; Behm, David G

    2017-11-17

    The purpose of this study was to evaluate the influence of sex, exercise order, and rest interval on neuromuscular fatigue resistance for an alternated strength training sequence of bench press (BP) and leg press (LP) exercises. Twelve women and 16 men, both recreationally trained, performed four sessions in a random order: 1) BP followed by LP with three-minutes rest (BP+LP with rest), 2) LP followed by BP with three-minutes rest (LP+BP with rest), 3) BP followed by LP without rest interval (BP+LP no rest), and 4) LP followed by BP without rest interval (LP+BP no rest). Participants performed four sets with 100% of 10RM load to concentric failure with the goal of completing the maximum number of repetitions in both exercises. The fatigue index was analyzed from the first and last sets of each exercise bout. A main effect for sex showed that women exhibited 25.5% (p=0.001) and 24.5% (p=0.001) greater BP and LP fatigue than men respectively when performing 10RM. Men exhibited greater BP (p<0.0001; 34.1%) and LP (p<0.0001; 30.5%) fatigue resistance when a rest period was provided. Men did not show an exercise order effect for BP fatigue and exhibited greater (p=0.0003; 14.5%) LP fatigue resistance when BP was performed first. The present study demonstrated the greater fatigue resistance of men when performing 10RM BP and LP exercises. Since men tend to experience less fatigue with the second exercise in the exercise pairing, women's training programs should be adjusted to ensure they do not parallel men's resistance training programs.

  6. A superconducting solenoid and press for permanent magnet fabrication

    International Nuclear Information System (INIS)

    Mulcahy, T. M.; Hull, J. R.

    2002-01-01

    For the first time, a superconducting solenoid (SCM) was used to increase the remnant magnetization of sintered NdFeB permanent magnets (PMs). In particular, improved magnetic alignment of commercial-grade PM powder was achieved, as it was axial die pressed into 12.7-mm diameter cylindrical compacts in the 76.2-mm warm bore of a 9-T SCM. The press used to compact the powder is unique and was specifically designed for use with the SCM. Although the press was operated in the batch mode for this proof of concept study, its design is intended to enable automated production. In operation, a simple die and punch set made of nonmagnetic materials was filled with powder and loaded into a nonmagnetic press tube. The cantilevered press tube was inserted horizontally, on a carrier manually advanced along a track, into the SCM. The robustness of the mechanical components and the SCM, in its liquid helium dewar, were specifically designed to allow for insertion and extraction of the magnetic powder and compacts, while operating at 9 T. Compaction was achieved by pressing the punches between the closed end of the press tube and the hydraulic cylinder mounted on the opposite end. Improvements up to 10% in magnetization and 20% in energy products of the permanent magnets were obtained, as the alignment fields were increased above the 2-T maximum field of the electromagnets used in industry. Increases in magnetization of 3% are significant in the mature sintered magnet industry

  7. Jatropha press cake as organic fertilizer in lettuce cultivation

    Directory of Open Access Journals (Sweden)

    José R. Mantovani

    Full Text Available ABSTRACT In biodiesel production, vegetable press cake is obtained as waste, and a suitable destination for jatropha press cake would be the use in agriculture as organic fertilizer. This study aimed to evaluate the effect of jatropha press cake on soil fertility attributes and on lettuce production and accumulation of nutrients in the shoots. The experiment was conducted in pots in a greenhouse, in a randomized block design with eight treatments and five replicates. The treatments consisted of doses of jatropha press cake equivalent to 0, 0.5, 1.0, 2.0, 4.0, 8.0, 16.0 and 32.0 t ha-1. Portions of 5.5 dm3 of soil received limestone, phosphate fertilizer and the doses of jatropha press cake, and remained incubated for 30 days. After incubation, soil samples were collected, each pot received one lettuce seedling and the experiment was carried out for 45 days. The organic fertilization with jatropha press cake increased the contents of nutrients in the soil, especially K+, but caused increment in soil acidity and electrical conductivity. The use of jatropha press cake as organic fertilizer decreased lettuce production and accumulation of nutrients in the shoots.

  8. Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

    Directory of Open Access Journals (Sweden)

    A. A. Antsifirov

    2014-01-01

    Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

  9. Press problem related to nuclear energy news reporting

    International Nuclear Information System (INIS)

    Arai, Mitsuo

    2008-01-01

    Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)

  10. The approach of nuclear related issues by the press

    International Nuclear Information System (INIS)

    Manetti, Cristiane Teixeira; Tanimoto, Katia Suemi; Hiromoto, Goro

    2009-01-01

    Nuclear energy has always been a polemic issue, and it is usually more intensely associated, by the general public, to the risks than to the benefits from its use; in this sense, the mass media have clearly had its share of responsibility for public opinion formation. This paper presents a report on the coverage of the nuclear issue in the press, identifying the amount of negative and positive views on the subject, as well as the people involved in the process. The analysis comprises the period from February 2007 to February 2008, right after the edition of the 4th IPCC Report. From that sample, 172 texts published in widely known newspapers and magazines, most of them from Sao Paulo State, were identified. The analyzed speeches were classified according to five information sources: specialists, users, authorities, protagonists and entrepreneurs. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in this paper. (author)

  11. The approach of nuclear related issues by the press

    Energy Technology Data Exchange (ETDEWEB)

    Manetti, Cristiane Teixeira; Tanimoto, Katia Suemi; Hiromoto, Goro [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: cristianemanetti@hotmail.com, e-mail: katia_tanimoto@hotmail.com, e-mail: hiromoto@ipen.br

    2009-07-01

    Nuclear energy has always been a polemic issue, and it is usually more intensely associated, by the general public, to the risks than to the benefits from its use; in this sense, the mass media have clearly had its share of responsibility for public opinion formation. This paper presents a report on the coverage of the nuclear issue in the press, identifying the amount of negative and positive views on the subject, as well as the people involved in the process. The analysis comprises the period from February 2007 to February 2008, right after the edition of the 4th IPCC Report. From that sample, 172 texts published in widely known newspapers and magazines, most of them from Sao Paulo State, were identified. The analyzed speeches were classified according to five information sources: specialists, users, authorities, protagonists and entrepreneurs. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in this paper. (author)

  12. Role of the press in cold fusion saga

    International Nuclear Information System (INIS)

    Lindley, D.

    1992-01-01

    Press reports of cold-fusion discoveries in Utah and the pending publication of them in Nature magazine caught the associate editor of Nature, David Lindley, by surprise. Like most people, he had never heard of cold fusion. He learned that two papers, one from Steven Jones at Brigham Young University and one from Stanley Pons and Martin Fleischmann of the University of Utah, had been submitted to Nature and were undergoing the magazine's peer-review process. For weeks, Lindley was bombarded by reporters wanting daily progress reports. Many of the reporters considered the peer review a fuddy-duddy procedure meant primarily to impose conformity and suppress revolutionary ideas. In the end, Nature decided to publish the paper by Jones but not the one by Pons and Fleischmann. Because of the doubts cast on Pons and Fleischmann's findings, Nature's decision created no great public stir, Lindley recalls. But it did help reinforce in the authors the belief that they were heretics whom the establishment was out to destroy. Like politicians struggling at the polls, they blamed everyone but themselves, Lindley says. Above all, they blaimed the two all-time favorites - the media and the establishment

  13. Representations of handicaped in the portuguese press: hegemony and emancipation

    Directory of Open Access Journals (Sweden)

    Patrícia Neca

    2012-12-01

    Full Text Available The purpose of this study is to describe and analyze what are the representations that three Portuguese general-interest newspapers - Diário de Notícias, Jornal de Notícias and Público - construct and convey about people with disabilities. The analysis was guided by the perspective of social representations, on the assumption that the views conveyed by the press are shared by society and affect the public opinion. A total of 220 articles about disabilities, published in November and December between 2004 and 2009 where analyzed. The results show that there is little questioning in the newspapers regarding issues related with disability and that there are different representations mediated by different newspapers. Diário de Notícias and Público convey hegemonic representations, in other words, don´t discuss the disability issues and show the group as homogeneous, incompetent and object of social policies, thus blocking the appearance of new representations. Jornal de Notícias convey emancipated representations, this is, opens space to the debate of the new ideas, showing disabled people as competent, mainly in articles about awareness raising and physical disability. This debate enhances the appearance of new representations. Regarding mental disability, it appears associated to the stereotype of incompetence, in all the newspapers analyzed.

  14. Concept Design of Movable Beam of Hydraulic Press

    Directory of Open Access Journals (Sweden)

    Li Yancong

    2017-01-01

    Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

  15. Fabrication and properties of hot pressed bismuth tungstate

    International Nuclear Information System (INIS)

    Streicher, W.L.

    1978-01-01

    Bi 2 WO 6 is a synthetic polar material that is a possible candidate for energy conversion and detection systems. Previous research on this material has been concerned with crystal growth and sintering characteristics of polycrystalline compacts. This study involves itself with the fabrication of polycrystalline compacts by hot pressing techniques. Densities approaching theoretical crystal density were achieved by hot pressing at 850 0 C for one hour with pressures exceeding 35 MPa. Before hot pressing, the sintering range was determined by high temperature dilatometry of unfired Bi 2 WO 6 ceramics. Hot pressed discs were characterized by scanning electron microscopy, differential scanning calorimetry, and x-ray diffraction. Electrical properties were determined by dc resistivity, capacitance, and conductance measurements, ac poling, dc poling, and current-voltage measurements

  16. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    African Journals Online (AJOL)

    Bola

    2015-05-13

    May 13, 2015 ... Seven different substrates (A to G) were prepared from saw dust, palm press ... can grow in a wide range of soil types with relatively low ..... documented to include; cotton waste, sugar cane ..... Canada wood ash sources. Can.

  17. Poland's Press and Broadcasting Under the Gierek Regime

    Science.gov (United States)

    Shanor, Donald R.

    1974-01-01

    Reports that the Polish press and broadcasting have been carrying more news and less propaganda since the 1970 Baltic upheavel and that the Polish media are generally allowed more freedom than media in other Communist nations. (RB)

  18. Press releases — the new trend in science communication

    DEFF Research Database (Denmark)

    Autzen, Charlotte

    2014-01-01

    Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

  19. Cars & Censorship: How Advertising Pressure Can Corrupt a Free Press.

    Science.gov (United States)

    Collins, Ronald K. L.

    1992-01-01

    Discusses "private censorship" as it relates to car dealers and television advertising. Defines "private censorship" as that which occurs when a broadcaster suppresses or alters a news story that affects commercial clients (advertisers). Makes recommendations for a freer press. (JOW)

  20. Modelling of powder die compaction for press cycle optimization

    Directory of Open Access Journals (Sweden)

    Bayle Jean-Philippe

    2016-01-01

    Full Text Available A new electromechanical press for fuel pellet manufacturing was built last year in partnership between CEA-Marcoule and ChampalleAlcen. This press was developed to shape pellets in a hot cell via remote handling. It has been qualified to show its robustness and to optimize the compaction cycle, thus obtaining a better sintered pellet profile and limiting damage. We will show you how 400 annular pellets have been produced with good geometry's parameters, based on press settings management. These results are according to a good phenomenological pressing knowledge with Finite Element Modeling calculation. Therefore, during die pressing, a modification in the punch displacement sequence induces fluctuation in the axial distribution of frictional forces. The green pellet stress and density gradients are based on these frictional forces between powder and tool, and between grains in the powder, influencing the shape of the pellet after sintering. The pellet shape and diameter tolerances must be minimized to avoid the need for grinding operations. To find the best parameters for the press settings, which enable optimization, FEM calculations were used and different compaction models compared to give the best calculation/physical trial comparisons. These simulations were then used to predict the impact of different parameters when there is a change in the type of powder and the pellet size, or when the behavior of the press changes during the compaction time. In 2016, it is planned to set up the press in a glove box for UO2 manufacturing qualification based on our simulation methodology, before actual hot cell trials in the future.

  1. Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride

    Science.gov (United States)

    2012-01-05

    Hutchinson, Adv. Appl . Mech. 29 (1992). [34] H. Ming-Yuan, J.W. Hutchinson, Int. J. Solids Struct. 25 (1989) 1053. [35] J. Salem , L. Ghosn, Int. J...Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride by Guangli Hu, C. Q. Chen, K. T. Ramesh, and J. W. McCauley ARL-RP-0487...Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-0487 June 2014 Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride

  2. Speech freedom and press freedom in human security in Rwanda

    OpenAIRE

    Niyonzima, Oswald

    2014-01-01

    Treball Final de Màster Universitari Internacional en Estudis de Pau, Conflictes i Desenvolupament. Codi: SAA074. Curs: 2013/2014 Freedom of speech and press freedom are key foundations of all human rights as stipulated in human rights declaration of 1948. Denying people the right to free speech is keeping them away from what is happening in this world, thus, hindering them from participating in decision making. While speech freedom and press freedom are key tools to measure if a country ...

  3. PRESS: A Novel Framework of Trajectory Compression in Road Networks

    OpenAIRE

    Song, Renchu; Sun, Weiwei; Zheng, Baihua; Zheng, Yu

    2014-01-01

    Location data becomes more and more important. In this paper, we focus on the trajectory data, and propose a new framework, namely PRESS (Paralleled Road-Network-Based Trajectory Compression), to effectively compress trajectory data under road network constraints. Different from existing work, PRESS proposes a novel representation for trajectories to separate the spatial representation of a trajectory from the temporal representation, and proposes a Hybrid Spatial Compression (HSC) algorithm ...

  4. Corporate social responsibility's discourse in lithuanian business press

    OpenAIRE

    Marčenkovas, Marius

    2014-01-01

    The object of this master work is corporate social responsibility's (CSR) discourse. The purpose of this work is to analyze how Lithuanian business press presents CSR topic. The main tasks to reach this purpose are: overview and compare CSR definitions; analyze media impact to CSR; analyze and summarize CSR discourse in Lithuanian business press. Literature analysis, synthesis and comparative methods were used to drawn conclusions. After the literature analysis of such scientists as Ph. Kotle...

  5. Resident-performed Ex-PRESS shunt implantation versus trabeculectomy.

    Science.gov (United States)

    Seider, Michael I; Rofagha, Soraya; Lin, Shan C; Stamper, Robert L

    2012-09-01

    To compare outcomes between resident-performed trabeculectomy and Ex-PRESS shunt implantation. A consecutive cohort of 36 Ex-PRESS shunt implantations and 57 trabeculectomies (1 eye/patient) performed by resident surgeons in their third year of ophthalmic training at the University of California, San Francisco and at the San Francisco Veterans Administration Hospital, under the supervision of a single glaucoma fellowship-trained surgeon were included in this study. Eyes with PRESS shunt groups at all follow-up points. On average, the Ex-PRESS shunt group required significantly less ocular antihypertensive medication to control IOP at 3 months postoperative (P=0.01), but no difference was found at 6 months or 1 year (all, P≥0.28). A larger proportion of Ex-PRESS shunt patients had good IOP control without medication at 3 (P=0.057) and 6 months (P=0.076) postoperatively. No difference was found in the rates of sight-threatening complications between groups (all, P≥0.22). In the hands of ophthalmology residents in their third year of training, the trabeculectomy and Ex-PRESS shunt implantation procedures perform comparably in terms of postoperative IOP control, reduction in patient dependence on ocular antihypertensive medications, and risk of complication in our population.

  6. Anthropometry as a predictor of bench press performance done at different loads.

    Science.gov (United States)

    Caruso, John F; Taylor, Skyler T; Lutz, Brant M; Olson, Nathan M; Mason, Melissa L; Borgsmiller, Jake A; Riner, Rebekah D

    2012-09-01

    The purpose of our study was to examine the ability of anthropometric variables (body mass, total arm length, biacromial width) to predict bench press performance at both maximal and submaximal loads. Our methods required 36 men to visit our laboratory and submit to anthropometric measurements, followed by lifting as much weight as possible in good form one time (1 repetition maximum, 1RM) in the exercise. They made 3 more visits in which they performed 4 sets of bench presses to volitional failure at 1 of 3 (40, 55, or 75% 1RM) submaximal loads. An accelerometer (Myotest Inc., Royal Oak MI) measured peak force, velocity, and power after each submaximal load set. With stepwise multivariate regression, our 3 anthropometric variables attempted to explain significant amounts of variance for 13 bench press performance indices. For criterion measures that reached significance, separate Pearson product moment correlation coefficients further assessed if the strength of association each anthropometric variable had with the criterion was also significant. Our analyses showed that anthropometry explained significant amounts (p bench press prowess in athletes.

  7. Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature

    Science.gov (United States)

    Wenlong Wang; Douglas J. Gardner; Melissa G.D. Baumann

    2002-01-01

    In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. However, because it is impossible to reduce both pressing time and temperature while maintaining panel physical and mechanical properties, this study...

  8. Comparison of Myoelectric Activity of a Selection of Upper Extremity Muscles while Doing Bench Press in Two Training Methods of TRX and Barbell Bench Press

    Directory of Open Access Journals (Sweden)

    Ahmad Reza Zibaei

    2016-12-01

    Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.

  9. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    Science.gov (United States)

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Elbow joint fatigue and bench-press training.

    Science.gov (United States)

    Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

    2014-01-01

    Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

  11. Movement Features Which Describe the Flat Bench Press

    Directory of Open Access Journals (Sweden)

    Król Henryk

    2017-06-01

    Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.

  12. Freedom of the Press In the Scope of Human Rights

    Directory of Open Access Journals (Sweden)

    Sri Ayu Astuti

    2014-01-01

    Full Text Available Freedom of expression and press freedom is the embodiment of the recognition of human rights. Freedom of expression is also the existence of press to disclose the news with honesty and do not get a pressure to deliver the news to the public space, which in news production is known as a work of journalism. Now the  press has gained freedom of expression in the news production process which is guaranteed in the state constitution. Although Article 28 of the Constitution of the Republic of Indonesia 1945 does not point directly at the press, However, Article 28 F emphasis on processing and storage as well as ownership, excavations to information. It also contains provisions on the freedom of expression of others, which should be valued and respected. It shows equality for everyone in his position before the law in accordance with Article 27 1945 Constitution, which emphasizes the recognition of constitutional rights that belong to every person in the state of law in the Republic of Indonesia. Thus the press, which have freedom of expression in the writings of journalistic works are required to be responsible for the published news. So as not to face the legal issues and criminalization, then press should perform tasks and functions to enforce ethics as the precautionary principle when processing the news and broadcast it to the public space, as well as upholding human rights. How To Cite: Astuti, S. (2014. Freedom of the Press In the Scope of Human Rights. Rechtsidee, 1(1, 101-118. doi:http://dx.doi.org/10.21070/jihr.v1i1.96

  13. Framing alleged Islamist plots: a case study of British press coverage since 9/11

    OpenAIRE

    Matthews, James

    2015-01-01

    In the decade post 9/11 , the UK terrorist threat was associated with a series of high profile counter terrorism operations, linked to specific plots. These terrorism related episodes received significant media attention and,\\ud as a consequence, were a visible sign of the contemporary terrorist threat. This paper seeks to identify the dominant frames rendered in news media reporting on these episodes. Through a longitudinal study of UK press coverage, the analysis reveals that two prominent ...

  14. Engaging and Supporting a University Press Scholarly Community

    Directory of Open Access Journals (Sweden)

    Megan Taylor

    2018-03-01

    Full Text Available In this paper we explore how the development of The University of Huddersfield Press, a publisher of open access scholarly journals and monographs, has enabled the sharing of research with a wider online audience. We situate the development of the Press within a wider research environment and growing community of New University Presses (NUPs where there is an increasing demand for demonstrating research impact, which drives the need for improved analysis and reporting of impact data, a task that often falls within the remit of library and academic support services. We detail the benefits of the University Press Manager role in terms of ensuring professional service that delivers consistency and sustainability. We go on to outline the experiences of engaging with different online spaces and detail the extensive support for student authors. We argue that in order for the Press to support building a strong and engaged scholarly community and provide new spaces for emerging research, continued investment in both platform development and infrastructure is required.

  15. Natural Hazards and the press in the western Mediterranean region

    Directory of Open Access Journals (Sweden)

    M. Llasat-Botija

    2007-07-01

    Full Text Available This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

  16. Asynchronous decision making in a memorized paddle pressing task.

    Science.gov (United States)

    Dankert, James R; Olson, Byron; Si, Jennie

    2008-12-01

    This paper presents a method for asynchronous decision making using recorded neural data in a binary decision task. This is a demonstration of a technique for developing motor cortical neural prosthetics that do not rely on external cued timing information. The system presented in this paper uses support vector machines and leaky integrate-and-fire elements to predict directional paddle presses. In addition to the traditional metrics of accuracy, asynchronous systems must also optimize the time needed to make a decision. The system presented is able to predict paddle presses with a median accuracy of 88% and all decisions are made before the time of the actual paddle press. An alternative bit rate measure of performance is defined to show that the system proposed here is able to perform the task with the same efficiency as the rats.

  17. The regulation of press freedoms (1863-1867

    Directory of Open Access Journals (Sweden)

    Laurence Coudart

    2015-10-01

    Full Text Available The main objective of this essay is to analyze the legislation affecting the press during the French Intervention and the Second Mexican Empire and establish their regulatory effects. These regulations are frequently ignored by the historiography. The article is limited to the origins, innovations, mechanisms and evolution of printing regulations during this period. As a whole, this allows the reader to observe the restrictive conception of press freedom held by the Mexican political class and their willingness, during the second half of the 19th Century, to turn to prohibitive, repressive, authoritarian and centralist legislation. The article also reveals the extent to which Imperial legislation and its logic of censorship were neither unprecedented nor sudden foreign impositions but instead the expressions of a long-lasting desire for government control over the press.

  18. Method for hot pressing irregularly shaped refractory articles

    Science.gov (United States)

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  19. Advertising presence on the visual configuration of the digital press

    Directory of Open Access Journals (Sweden)

    Belinda de Frutos Torres

    2016-07-01

    Full Text Available Visual strength is responsible for one of the mayor changes undergone by the digital press with Internet explosion and the increase of the Informational and Communicational Technologies. The present study analyzes the structure the digital press has taken and the role of the digital advertisement in the composition of their textual and iconic elements. The paper quantifies the picture representations volume and compares their presence on the digital natives papers with those coming from the traditional paper support. The results reveal that there is a mayor contribution of adverts on the native on-line press compare to the on-line paper arriving from the traditional media decreasing the information volume. At the same time the visual volume is boosted on the former compare to the digital media with a paper support. Altogether it can be said that visual component prompted the digital papers first page, being this effect enhanced on the native digital papers.

  20. Film Advertising in the Albanian Press before World War II

    Directory of Open Access Journals (Sweden)

    Vjollca Hysi Panajoti

    2015-05-01

    Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.

  1. Comparison of concentric and eccentric bench press repetitions to failure.

    Science.gov (United States)

    Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E

    2015-04-01

    Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.

  2. Process design of press hardening with gradient material property influence

    International Nuclear Information System (INIS)

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-01-01

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  3. Factors influencing the creep strength of hot pressed beryllium

    International Nuclear Information System (INIS)

    Webster, D.; Crooks, D.D.

    1975-01-01

    The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals

  4. Vacuum hot pressing of titanium-alloy powders

    International Nuclear Information System (INIS)

    Malik, R.K.

    1975-01-01

    Full or nearly full dense products of wrought-metal properties have been obtained by vacuum hot pressing (VHP) of several prealloyed Ti--6Al--4V powders including hydride, hydride/dehydride, and rotating electrode process (REP) spherical powder. The properties of billets VHP from Ti--6Al--4V hydride powder and from hydride/dehydride powders have been shown to be equivalent. The REP spherical powder billets processed by VHP or by hot isostatic pressing (HIP) resulted in equivalent tensile properties. The potential of VHP for fabrication of near net aircraft parts such as complex fittings and engine disks offers considerable cost savings due to reduced material and machining requirements

  5. Fisioterapia respiratória associada à pressão positiva nas vias aéreas na evolução pós-operatória da cirurgia bariátrica Respiratory physiotherapy associated with airway positive pressure in the postoperative bariatric surgery evolution

    Directory of Open Access Journals (Sweden)

    Fabiana Sobral Peixoto-Souza

    2012-09-01

    Full Text Available Analisar volume corrente (VC, volume minuto (VM e frequência respiratória (FR de obesas mórbidas no pós-operatório de cirurgia bariátrica (CB, após a fisioterapia respiratória convencional (FRC associada ou não à pressão positiva contínua nas vias aéreas (CPAP no pré-operatório. Foram estudadas 36 mulheres, com idade de 40,1±8,41 anos, que seriam submetidas à CB por laparotomia e que realizaram FRC (exercícios respiratórios diafragmáticos, de inspirações profundas, fracionadas e associados a movimentos de membros superiores, 1 série de 10 repetições de cada exercício por 30 dias antes da cirurgia. Após internação, 18 delas foram submetidas a 20 minutos de CPAP, 1 hora antes da indução anestésica e compuseram o grupo FRC+CPAP. As outras 18 não receberam o CPAP e compuseram o grupo FRC. Foram avaliados VM, VC e FR por meio do ventilômetro, no momento da internação e 24 horas após a realização da cirurgia. Constatou-se que as medidas de VC, VM e FR não apresentaram significância estatística quando comparados os resultados do pré e pós-operatório em ambos os grupos, bem como quando comparados os dois grupos entre si tanto no pré como no pós-operatório. Os resultados sugerem que a tanto a aplicação da FRC como a aplicação da FRC+CPAP no período pré-operatório contribui para a manutenção das variáveis respiratórias no pós-operatório. A aplicação do CPAP antes da indução anestésica não promoveu benefícios adicionais no pós-operatório de CB no que se refere aos volumes pulmonares.To assess the tidal volume (VT, minute volume (MV and respiratory rate (RR of morbidly obese women in postoperative bariatric surgery (BS, after the conventional respiratory physiotherapy (CRP with or without preoperatively continuous positive airway pressure (CPAP. Thirty-six women, aged 40.1±8.41 years, that would be submitted to BS by laparotomy were studied. All of them underwent preoperative outpatient

  6. The National Football League-225 Bench Press Test and the Size-Weight Illusion.

    Science.gov (United States)

    Luebbers, Paul E; Buckingham, Gavin; Butler, Michael S

    2017-06-01

    The purpose of this study was to test reports that size and arrangement manipulations of weight plates (i.e., inducing a size-weight illusion [SWI]) effect athletic weightlifting performance. The participants were 72 experienced, weight-trained collegiate American football players. Across three weeks, each athlete performed three different repetitions-to-fatigue bench press tests (NFL-225, SWI-225, and SWI-215). A multiple regression revealed a positive association between participants' strength relative to the test load and repetitions for NFL-225 and SWI-215, but no association with SWI-225. To explore these results, players were ranked into quartiles based on their one-repetition maximum relative to 102.27 kg (225 lb), and a 3 × 4 repeated measures analysis of variance was conducted. The primary finding was a significant Test Condition × Quartile interaction ( p = .004). Bonferroni-corrected pairwise comparisons revealed that Quartile 4 (those with lowest strength relative to test load) completed more repetitions for SWI-225 compared with NFL-225 ( p = .049). These results suggest that alternate weight plate arrangements may be beneficial for those whose bench press load is near the lifter's one-repetition maximum. However, variations of the SWI do not appear to affect the performance of repetitions-to-fatigue bench press tests for the majority of collegiate American football players.

  7. Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing

    International Nuclear Information System (INIS)

    Gao Nong; Starink, Marco J.; Furukawa, Minoru; Horita, Zenji; Xu Cheng; Langdon, Terence G.

    2005-01-01

    A spray-cast Al-7034 alloy was processed by equal-channel angular pressing (ECAP) to a total of eight passes at 473 K and the pressed samples were examined using transmission electron microscopy, differential scanning calorimetry and electron back-scatter diffraction. It is shown that the grain size of the alloy is reduced to ∼0.3 μm by ECAP and the high pressures associated with ECAP lead to a fragmentation of the rod-like η-phase. The high temperature of ECAP also produces a precipitation of η-phase. There is an increase in the fraction of high-angle boundaries during the initial passes of ECAP but the fraction of low-angle boundaries remains high even after eight passes

  8. Acute chest pain after bench press exercise in a healthy young adult.

    Science.gov (United States)

    Smereck, Janet A; Papafilippaki, Argyro; Sudarshan, Sawali

    2016-01-01

    Bench press exercise, which involves repetitive lifting of weights to full arm extension while lying supine on a narrow bench, has been associated with complications ranging in acuity from simple pectoral muscle strain, to aortic and coronary artery dissection. A 39-year-old man, physically fit and previously asymptomatic, presented with acute chest pain following bench press exercise. Diagnostic evaluation led to the discovery of critical multivessel coronary occlusive disease, and subsequently, highly elevated levels of lipoprotein (a). Judicious use of ancillary testing may identify the presence of "high-risk" conditions in a seemingly "low-risk" patient. Emergency department evaluation of the young adult with acute chest pain must take into consideration an extended spectrum of potential etiologies, so as to best guide appropriate management.

  9. Valores de pressão arterial e suas associações com fatores de risco cardiovasculares em servidores da Universidade de Brasília Blood pressure levels and their association with cardiovascular risk factors among employees of the University of Brasília, a Brazilian public university

    Directory of Open Access Journals (Sweden)

    Tatiana Valverde da Conceição

    2006-01-01

    Full Text Available OBJETIVO: Verificar e classificar, de acordo com o JNC 7, os níveis de pressão arterial dos servidores acima de quarenta anos da Universidade de Brasília, e estimar a prevalência de fatores de risco cardiovasculares presentes em tal população. MÉTODOS: Foi realizado um estudo transversal na Universidade de Brasília, onde os servidores acima de quarenta anos responderam a um questionário e tiveram pressão arterial, peso e altura medidos. Os níveis de pressão arterial foram classificados de acordo com o JNC 7 e os dados demográficos dos indivíduos de cada categoria foram analisados. A porcentagem dos fatores de risco foi calculada. A análise estatística foi feita através do teste ANOVA e do teste qui-quadrado, quando aplicável. RESULTADOS: Setecentos e quatro servidores participaram do estudo, incluindo 438 homens e 266 mulheres. A mediana de idade foi 47 anos. Segundo o JNC 7, 139 (19,8% pessoas foram classificadas como normotensas; 298 (42,3% como pré-hipertensas e 267 (37,9% como hipertensas. Os fatores de risco avaliados foram sobrepeso/obesidade (56,8%, tabagismo (19,5%, consumo de bebidas alcoólicas (53,6%, sedentarismo (48,4% e hipertensão (37,9%. CONCLUSÃO: A alta freqüência de níveis pressóricos elevados e fatores de risco cardiovasculares apontam para a necessidade de medidas preventivas e terapêuticas de doenças cardiovasculares direcionadas aos servidores da universidade.OBJECTIVE: To verify and classify, according to the JNC 7, the blood pressure levels (BPL of the employees of University of Brasilia, a public university in Brazil, who are older than 40 years of age, and to estimate the prevalence of cardiovascular risk factors in this population. METHODS: A cross-sectional study was conducted at the University of Brasilia, with employees over 40 years of age. They answered a questionnaire and had their blood pressure, weight and height measured. The BPLs were classified according to the JNC 7

  10. Influence of the "Slingshot" bench press training aid on bench press kinematics and neuromuscular activity in competitive powerlifters.

    Science.gov (United States)

    Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee

    2017-02-13

    This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.

  11. Equal channel angular pressing of pure aluminium—an analysis

    Indian Academy of Sciences (India)

    Abstract. Equal channel angular pressing (ECAP) is a novel technique for producing ultra fine grain struc- tures in submicron level by introducing a large amount of shear strain into the materials without changing the billet shape or dimensions. This process is well suited for aluminium alloys and is capable of producing ultra.

  12. EMG analysis and modelling of flat bench press using artificial ...

    African Journals Online (AJOL)

    The objective of this study was to evaluate the contribution of particular muscle groups during the Flat Bench Press (FBP) with different external loads. Additionally, the authors attempted to determine whether regression models or Artificial Neural Networks (ANNs) can predict FBP results more precisely and whether they can ...

  13. Democratic Socialism: Toward a Fifth Theory of the Press.

    Science.gov (United States)

    Picard, Robert G.

    For more than 25 years, the "four theories" paradigm has been dominant in the study of the relationships among the press, society, and the state. Asserting that the major approaches to such study are the libertarian, social responsibility, authoritarian, and Soviet/communist theories, this paradigm fails to account for economic and…

  14. Picture This: 4-H Press Corps Builds Life Skills

    Science.gov (United States)

    Clary, Christy D.

    2018-01-01

    A picture is worth a thousand words! Extension professionals are often looking for the picture that best captures an event and tells its story. Look beneath the surface, though, and a picture is worth much more. Developing a 4-H press corps results in a collection of useful photos but has the added benefit of providing 4-H members with an…

  15. Water holding capacity and enzymatic modification of pressed potato fibres

    NARCIS (Netherlands)

    Ramasamy, U.

    2014-01-01

    Cell wall polysaccharides (CWPs) contribute to the water holding capacity (WHC) of fibre rich feeds, such as pressed potato fibres (PPF). However, the role of CWPs on the WHC of PPF was unidentified so far.

    PPF was characterized to be abundant in arabinogalactan (AG) linked

  16. The nuclear issue in the cuban press. Challenges and realities

    International Nuclear Information System (INIS)

    Contreras Izquierdo, Marta; Rodriguez Guerra, Ingrids; Gonzalez Montoto, Iosbel; Fernandez Rondon, Manuel

    2005-01-01

    The work presents an analysis of the impact of nuclear issue on the Cuban press from 1990 to 2005 that was carried out by a group of communications specialists from nuclear area. An analysis of main challenges and actions of this group, aimed at informing the public the present situation of the Cuban nuclear programme and its perspectives, was also included

  17. Finishing procedures action on mechanical characteristics of pressed ceramics

    Directory of Open Access Journals (Sweden)

    Mohamed Abdel Moniem Ahmed

    2018-06-01

    Conclusions& significance: Grinding & finishing procedures of pressed ceramics showed significant effect Of drill speed and polishing technique over flexural strength, As Grinding with no finishing and polishing procedure showed lowest flexural Strength values followed by finishing and polishing procedure followed by finishing and polishing with polishing paste procedure.

  18. Process considerations for hot pressing ceramic nuclear waste forms

    International Nuclear Information System (INIS)

    Wilson, C.N.; Brite, D.W.

    1981-01-01

    Spray calcined simulated ceramic nuclear waste powders were hot pressed in graphite, nickel-lined graphite and ZrO 2 -lined Al 2 O 3 dies. Densification, initial off-gas, waste element retention and pellet-die interactions were evaluated. Indicated process considerations and limitations are discussed. 15 figures

  19. Press Ideology and Organizational Control in Hong Kong.

    Science.gov (United States)

    Chan, Joseph Man; Lee, Chin-Chuan

    1988-01-01

    Surveys the entire Chinese journalist population of Hong Kong to determine how news organizations in the highly politicized environment of Hong Kong exercise institutional control on recruitment and newswork. Finds that press ideology is a major determinant of its organizational control. (MS)

  20. Nanoindentation hardness of hot-pressed boron suboxide

    International Nuclear Information System (INIS)

    Machaka, Ronald; Derry, Trevor E.; Sigalas, Iakovos

    2011-01-01

    Highlights: → The load-displacement indentation response of hot-pressed B 6 O is measured and analysed. → The nanoindentation hardness of hot-pressed boron suboxide is reported. → An approach is developed to simulate multi-cycling loading load-displacement curves. → A comprehensive model inter-comparison study of the ISE in hot-pressed B 6 O is also presented. → The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  1. Press travel to the Mochovce power plant in Slovakia

    International Nuclear Information System (INIS)

    1998-07-01

    This press dossier gives, first, a general presentation of the Mochovce power plant of the republic of Slovakia (history, technical characteristics, safety aspects, technical particularities of VVER 440/213 reactors (safety analysis, recent improvements), financing of the modernization project). Then, the activities of the Framatome group in central and eastern Europe are presented (partnerships, cooperation agreements and contracts). (J.S.)

  2. Constitutional Provisions on the Press: A World View.

    Science.gov (United States)

    Paraschos, Manny

    A study examined the legal treatment of the press in constitutions or other basic legal institutional documents from around the world. Sixty-three constitutions or basic documents from the Western World, the Communist Bloc, the Middle East, Africa, Southeast Asia, and Latin America were analyzed. Analysis revealed that most constitutions open with…

  3. A virtual model of the bench press exercise.

    Science.gov (United States)

    Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre

    2009-08-07

    The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.

  4. The Surrender of Tobruk in 1942: Press reports and soldiers ...

    African Journals Online (AJOL)

    The British and South African papers began to demand answers from politicians and military leaders for this shocking and unexpected catastrophe. The press ... Keywords: Prisoners of war (POWs), World War II, Union Defence Force, Erwin Rommel, Auchinleck, Ritchie, HB Klopper, South Africa, Eighth Army, Gazala ...

  5. Toward a Normative Theory of Freedom of the Press.

    Science.gov (United States)

    Jensen, Dwight Wm.

    In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

  6. Back-pressure Forging Using a Servo Press

    OpenAIRE

    河本, 基一郎; Kawamoto, Kiichiro

    2015-01-01

    博士論文要旨Abstract 以下に掲載:International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者:Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada

  7. Nanoindentation hardness of hot-pressed boron suboxide

    Energy Technology Data Exchange (ETDEWEB)

    Machaka, Ronald, E-mail: Ronald.Machaka@wits.ac.za [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Derry, Trevor E. [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Physics, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Sigalas, Iakovos [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa)

    2011-07-15

    Highlights: {yields} The load-displacement indentation response of hot-pressed B{sub 6}O is measured and analysed. {yields} The nanoindentation hardness of hot-pressed boron suboxide is reported. {yields} An approach is developed to simulate multi-cycling loading load-displacement curves. {yields} A comprehensive model inter-comparison study of the ISE in hot-pressed B{sub 6}O is also presented. {yields} The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  8. Press-fit bipolar radial head arthroplasty, midterm results

    NARCIS (Netherlands)

    Kodde, Izaäk F.; Heijink, Andras; Kaas, Laurens; Mulder, Paul G. H.; van Dijk, C. Niek; Eygendaal, Denise

    2016-01-01

    Theoretical advantages of bipolar compared with monopolar radial head arthroplasty include better accommodation of radiocapitellar malalignment, reduction of capitellar abrasion, and reduction of stress at the bone-implant interfaces. Our purpose was to report the midterm results of press-fit

  9. Book Review: Stars (Copyright 1985, Golden Press; New York)

    Science.gov (United States)

    Marigza, R. N., Jr.

    2009-06-01

    Stars is a part of the Golden Guides collection produced by Golden Press. It is a small 160 page paperback guide to the constellations, the sun, the moon, planets, and other celestial bodies. The book is convenient to carry along wherever you go, making it an easy to access reference material.

  10. Ethics and the Press: Readings in Mass Media Morality.

    Science.gov (United States)

    Merrill, John C., Ed.; Barney, Ralph D., Ed.

    This collection of 35 articles addresses the topic of the ethical considerations and implications involved in reporting the news. Included in this book are such articles as: "Ethics and Journalism" by John Merrill, "Quality in Mass Communications" by Wilbur Schramm, "The American Press: Some Truths About Truths" by…

  11. MICROSTRUCTURAL ANALYSIS OF HOT ISOSTATICALLY PRESSED AL-SIC

    NARCIS (Netherlands)

    Bronsveld, P.M.; Hosson, J.Th. De; Sargent, M.A.; Alsem, W.H.M.

    1991-01-01

    The difference between extruded and hot isostatically pressed (HIP) Al6061 both with a T6 final heat treatment and with a 30 wt.% SiC particulate reinforcement is one of densification. The higher density of the HIP material is not translated into a stronger material. The Mg2Si precipitation is

  12. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Clara Staples

    2016-06-01

    Full Text Available This paper will firstly examine the international framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the international human rights law framework. Thirdly it will consider the impact of Indonesia’s constitutional law and criminal and civil law, including sedition and defamation laws, and finally media ownership, on the interpretation and scope of the right to freedom of speech in the press. Consideration of these laws will be integrated with a discussion of judicial processes. This discussion will be used to determine how and in what circumstances the constitutional right to freedom of speech in the press may be facilitated or enabled, or on the other hand, limited, overridden or curtailed in Indonesia. Conclusions will then be drawn regarding the strengths and weaknesses of Indonesian laws in safeguarding the right to freedom of speech in the press and the democratic implications from an international human rights perspective. This inquiry will be restricted to Indonesian laws in existence during the post-New Order period of 1998 to the present, and to the information and analysis provided by English-language sources.

  13. The Press of the Soviet Union: A Bibliography.

    Science.gov (United States)

    Bergethon, Bruce; And Others

    Compiled in response to the need for more information on the differences between the press systems of the United States and the Soviet Union, this bibliography contains 240 entries. Consisting of newspaper articles, journal articles, books, and pamphlets, the bibliography provides an overview of the different journalistic philosophies of the two…

  14. Introducing Collabra, OA Journal from University of California Press

    OpenAIRE

    Morgan, Daniel

    2015-01-01

    An introductory presentation of Collabra, the open access mega journal from University of California Press, highlighting its unique business model which shares and spreads revenue back to the research community. (Presented at the FORCE 2015 conference at the University of Oxford, January 13, 2015.)

  15. Student Press and Distribution Issues: Rights and Responsibilities.

    Science.gov (United States)

    Bartlett, Larry D.

    1984-01-01

    This review analyzes case law in the area of student press and distribution and offers some guidelines for developing and implementing school policy and rules. Litigation is reviewed in order to clarify students' rights, limitations on administrative authority in matters of censorship and prior restraint, and actions in connection with writing and…

  16. Performing “responsibility” and “conspiracy” through press ...

    African Journals Online (AJOL)

    In 2003, the Australian cricketer Shane Warne was suspected and convicted of doping. The purpose of this article was to understand how he tried to resolve the problem/dilemma of being suspected and convicted of doping through three press statements, which he delivered to the media during the 2003 Cricket World Cup ...

  17. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    African Journals Online (AJOL)

    In the last few decades, rapid global demand for edible oils has resulted in a significant increase in the land area of oil crop cultivation. In the process of extraction of palm oil from oil palm fruit, biomass materials such as palm pressed fibre (PPF) are generated as waste products. This research was undertaken to evaluate ...

  18. The Press, the Government, and the Ethics Vacuum.

    Science.gov (United States)

    Merrill, John C.

    Immanuel Kant's idea of a will to do the right thing--to be ethical--is essentially a dead concept with both press and government. The reasons for this "ethics vacuum" are two-fold: the foundations of ethics in both circles are vague, confusing, and beset by relativism and pragmatism so that no system of ethics ever really coalesces; and neither…

  19. The Suburban Press; First Steps toward an Annotated Bibliography. Suburban Press Research Series No. 16 and 17.

    Science.gov (United States)

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…

  20. Ghrelin enhances cue-induced bar pressing for high fat food.

    Science.gov (United States)

    St-Onge, Veronique; Watts, Alexander; Abizaid, Alfonso

    2016-02-01

    Ghrelin is an orexigenic hormone produced by the stomach that acts on growth hormone secretagogue receptors (GHSRs) both peripherally and centrally. The presence of GHSRs in the ventral tegmental area (VTA) suggests that ghrelin signaling at this level may increase the incentive value of palatable foods as well as other natural and artificial rewards. The present investigation sought to determine if ghrelin plays a role in relapse to such foods following a period of abstinence. To achieve this, thirty-six male Long Evans rats were trained to press a lever to obtain a high fat chocolate food reward on a fixed ratio schedule of 1. Following an extinction period during which lever presses were not reinforced, rats were implanted with a cannula connected to a minipump that continuously delivered ghrelin, a GHSR antagonist ([d-Lys-3]-GHRP-6), or saline in the VTA for 14days. One week later, food reward-associated cues, food reward priming, and an overnight fast were used to induce reinstatement of the lever pressing response. Our results indicate that intra-VTA ghrelin enhances cue-induced reinstatement of responses for palatable food pellets. To the extent that the reinstatement paradigm is considered a valid model of relapse in humans, this suggests that ghrelin signaling facilitates relapse to preferred foods in response to food cues through GHSR signaling in the VTA. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses

    Science.gov (United States)

    X.L. Luo; Junyong Zhu; Roland Gleisner; H.Y. Zhan

    2011-01-01

    This article reports the effect of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. A wet cellulosic substrate of bleached kraft eucalyptus pulp and two wet sulfite-pretreated lignocellulosic substrates of aspen and lodgepole pine were pressed to various moisture (solids) contents by variation of pressing pressure and pressing...

  2. Research on Standard and Automatic Judgment of Press-fit Curve of Locomotive Wheel-set Based on AAR Standard

    Science.gov (United States)

    Lu, Jun; Xiao, Jun; Gao, Dong Jun; Zong, Shu Yu; Li, Zhu

    2018-03-01

    In the production of the Association of American Railroads (AAR) locomotive wheel-set, the press-fit curve is the most important basis for the reliability of wheel-set assembly. In the past, Most of production enterprises mainly use artificial detection methods to determine the quality of assembly. There are cases of miscarriage of justice appear. For this reason, the research on the standard is carried out. And the automatic judgment of press-fit curve is analysed and designed, so as to provide guidance for the locomotive wheel-set production based on AAR standard.

  3. Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast

    Directory of Open Access Journals (Sweden)

    Gaspar S.

    2016-06-01

    Full Text Available Recent research in the process of aluminum alloy die castings production, which is nowadays deeply implemented into the rapidly growing automobile, shipping and aircraft industries, is aimed at increasing the useful qualitative properties of the die casting in order to obtain its high mechanical properties at acceptable economic cost. Problem of technological factors of high pressure die casting has been a subject of worldwide research (EU, US, Japan, etc.. The final performance properties of die castings are subjected to a large number of technological factors. The main technological factors of high pressure die casting are as follows: plunger pressing speed, specific (increase pressure, mold temperature as well as alloy temperature. The contribution discusses the impact of the plunger pressing speed and specific (increase pressure on the mechanical properties of the casting aluminum alloy.

  4. Research on the Visual Processing System of the Punch Press

    Directory of Open Access Journals (Sweden)

    Sun Xuan

    2016-01-01

    Full Text Available Most of raw materials of small hardware processing for plate scraps, and it’s realized through the manual operation of ordinary punch, which way has the low production efficiency and the high labor intensity. In order to improve the automation level of production, developing and designing of a visual processing system for punch press manipulator which based on the MFC tools of Visual Studio software platform. Through the image acquisition and image processing, get the information about the board to be processed, such as shape, length, the center of gravity position and pose, and providing relevant parameters for positioning gripping and placing into the punch table positioning of the feeding manipulator and automatic programming of punching machine, so as to realize the automatic operation about press feeding and processing.

  5. Social Representations of the Environment in Press Media

    Directory of Open Access Journals (Sweden)

    Gislei Mocelin Polli

    2015-08-01

    Full Text Available Environmental issues are given prominence in the media and scientific circles. From the 60’s until early 2010 there were changes in the way people related to the environment, with a paradigm shift occurring regarding the environment. This study sought to identify the representational content disseminated by the press media on the environment in different periods. A qualitative survey was therefore conducted of documents, and data were obtained through texts published in a magazine with national circulation. The data were analyzed using the ALCESTE program with a Lexicographic Analysis. It was identified that the press media reflects the paradigm shifts, and publications dating from the late 60’s are compatible with the old paradigm, evolving over time, and are now compatible with the new environmental paradigm. The results indicate that currently the environment needs care in all its aspects and lack of care creates global impacts.

  6. News from the Library: newspapers anyone? Try PressDisplay!

    CERN Multimedia

    CERN Library

    2011-01-01

    PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published. With Pressdisplay, the time when newspapers were nicely displayed on wooden rods in libraries has passed...   Le Monde, International Herald Tribune and many more titles are displayed in their original layout including text and images, and you can print and e-mail the articles you are interested in. You even have the possibility to create rss feeds, so that the news reaches you directly.   The CERN Library has now activated a trial version of PressDisplay valid till 31 December; it is open to everyone at CERN. This trial doesn't offer the possibility to create personalised alerts based on specific search criteria. In case you need such features - or if you have any comments or questions - please contact us.

  7. Reducing VOC Press Emission from OSB Manufacturing; FINAL

    International Nuclear Information System (INIS)

    Gary D, McGinnis; Laura S, WIlliams; Amy E, Monte; Jagdish Rughani; Brett A, Niemi; Thomas M, Flicker

    2001-01-01

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board

  8. Indonesian journalistic competitions: tribute or threat for press practice

    Science.gov (United States)

    Dewi, P. A. R.; Aji, G. G.; Sukardani, P. S.

    2018-01-01

    This research aims to Investigate journalists’ understanding toward glittering generalities practice - positive and good coverage of the caused by the Journalistic contests, the prices are attracting them, Reviews their motives to Participate, and their beliefs about ethics al thing. It is also retrieve how the chief editor, as a decision maker in the mass media taking his responsibility on the glittering news. This research uses a case study method by conducting indepth interviews on journalists, editors, and professional the alliance to collect the data and analyse it based on critical paradigm. The results show that journalist believe that competition is good, and there is no violation as long as the stick to the press code of conduct, but for chief editors and professional alliance, they begin to aware the damage of the contest. The findings of this work will be valuable to develop critical thinking of press workers and promote awareness to the society to control the media practice.

  9. A new cleaner process to prepare pressing-powder

    Directory of Open Access Journals (Sweden)

    Shu, Z.

    2011-10-01

    Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO2.

    En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En

  10. Different Visions of Framing Violence in International Press News

    DEFF Research Database (Denmark)

    Ramirez, Jacobo

    in Mexico and to explore entrepreneurs’ reaction to the covered news. We also analyze journalists’ treatment of this news (Semetko & Valkendurg, 2000) and differences among newspapers from the U.S., Mexico and the European Union (EU). A sample of 200 news histories was constructed by integrating...... international and Mexican newspapers from 2006 to 2012. Our results showed that overall, U.S. and EU newspapers present more news related to violence towards entrepreneurs than Mexican outlets, which more often adopt the avoid strategy (Oliver, 1991). The conflict frame was more widely used in EU newspapers...... than in U.S. and Mexican newspapers, and the economic frame was more present in the U.S. and Mexican press than in the EU press. The morality frame was used more frequently by Mexican journalists than U.S. and European journalists. The results made it possible to observe the effects of framing...

  11. Visual impact in the digital press: a Spanish empirical research

    Directory of Open Access Journals (Sweden)

    Joan Francesc Fondevila Gascón

    2010-12-01

    Full Text Available Visual resource (photography and video inclusion in digital journalism is obtaining importance in the multimedia area. The principal resources of digital press are multimedia, hypertext and interactivity. Multimedia is in an initial process of evolution. The objective of this research is to observe empirically the use of visual resources by the digital pure player press. These media try to take advantage of the new multimedia possibilities in the development and presentation of the contents. We have analyzed empirically video and photography inclusion in the multimedia framework (text, photography, video, audio, infograph and animation programs in four digital newspapers (Libertad Digital and El Plural, in Spanish, and Vilaweb.cat and e-Noticies, in Catalan analyzed according to journalistic genres.

  12. Convicted Murderers and the Victorian Press: Condemnation vs. Sympathy

    Directory of Open Access Journals (Sweden)

    Martin J. Wiener

    2007-11-01

    Full Text Available Almost half of those receiving the death sentence in late-Victorian and Edwardian England were reprieved. The process of deciding which murderers were to hang and which were to be spared became an increasingly public one, thanks to the growing intervention of the press. This intervention grew alongside the accelerated expansion in the numbers and circulations of newspapers in the second half of the nineteenth century. As the press became a larger part of national life, its more „popular‟ and its more local segments carved out for themselves a new and ever more prominent role as major participants in public discourse over „justice‟ vs. „mercy‟ for condemned murderers. This involvement is a facet of Victorian and Edwardian newspapers that has previously been overlooked.

  13. Hot Isostatic Press (HIP) vitrification of radwaste concretes

    International Nuclear Information System (INIS)

    Siemer, D.D.; Scheetz, B.; Gougar, M.L.D.

    1995-01-01

    Properly formulated and properly ''canned'' radwaste concretes can be readily hot-isostatically-pressed (HIPed) into materials that exhibit performance equivalent to typical radwaste-type glasses. The HIPing conditions (temperature/pressure) required to turn a concrete waste form into a ''vitrified'' waste form are quite mild and therefore consistent with both safety and high productivity. This paper describes the process and its products with reference to its potential application to Idaho Chemical Processing Plant (ICPP) reprocessing wastes

  14. Mediated Nationalism: Press Freedom, Mass Media, and Nationalism

    Science.gov (United States)

    2017-12-01

    spread propaganda resulted in a positive response by listeners who were predisposed to anti-Semitism and a negative response by those whose prior...2016/jun/11/ david-cameron-brexit-eu-referendum- listen -jeremy-corbyn. 5 Nations with a censored press would likely have denied the expression of...nationalism. Those “who can understand them, or can acquire such comprehension is included in a moral and economic community.”45 He states that “what is

  15. Biological effects of the ionizing radiation. Press breakfast

    International Nuclear Information System (INIS)

    Flury-Herard, A.; Boiteux, S.; Dutrillaux, B.; Toledano, M.

    2000-06-01

    This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

  16. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    OpenAIRE

    Clara Staples

    2016-01-01

    This paper will firstly examine the International framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the International human rights law framework. Thirdly it will consider the impact of Indonesia's constitutional law and criminal and civil law, includin...

  17. Mechanical and thermophysical properties of hot-pressed SYNROC B

    International Nuclear Information System (INIS)

    Hoenig, C.L.; Newkirk, H.W.; Otto, R.A.; Brady, R.L.; Brown, A.E.; Ulrich, A.R.; Lum, R.C.

    1981-01-01

    The optimal SYNROC compositons for use with commercial waste are reviewed. Large amounts of powder (about 2.5 kg) were prepared by convention al ceramic operations to test the SYNROC concept on a processing scale. Samples, 15.2 cm in diameter, were hot pressed in graphite, and representative samples were cut for microstructural evaluations. Measured mechanical and thermophysical properties did not vary significantly as a function of sample location and were typical of titanate ceramic materials

  18. Film Advertising in the Albanian Press before World War II

    OpenAIRE

    Vjollca Hysi Panajoti; Mirdaim Axhami; Loreta Zela Axhami

    2015-01-01

    This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the ...

  19. The Social Theories of the press: journalism and society

    Directory of Open Access Journals (Sweden)

    Beatriz Marocco

    2005-06-01

    Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

  20. The Social Theories of the press: journalism and society

    Directory of Open Access Journals (Sweden)

    Beatriz Marocco

    2011-02-01

    Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

  1. Graphite and boron carbide composites made by hot-pressing

    International Nuclear Information System (INIS)

    Miyazaki, K.; Hagio, T.; Kobayashi, K.

    1981-01-01

    Composites consisting of graphite and boron carbide were made by hot-pressing mixed powders of coke carbon and boron carbide. The change of relative density, mechanical strength and electrical resistivity of the composites and the X-ray parameters of coke carbon were investigated with increase of boron carbide content and hot-pressing temperature. From these experiments, it was found that boron carbide powder has a remarkable effect on sintering and graphitization of coke carbon powder above the hot-pressing temperature of 2000 0 C. At 2200 0 C, electrical resistivity of the composite and d(002) spacing of coke carbon once showed minimum values at about 5 to 10 wt% boron carbide and then increased. The strength of the composite increased with increase of boron carbide content. It was considered that some boron from boron carbide began to diffuse substitutionally into the graphite structure above 2000 0 C and densification and graphitization were promoted with the diffusion of boron. Improvements could be made to the mechanical strength, density, oxidation resistance and manufacturing methods by comparing with the properties and processes of conventional graphites. (author)

  2. Production of press moulds by plasma spray forming process

    International Nuclear Information System (INIS)

    Borisov, Y.; Myakota, I.; Polyakov, S.

    2001-01-01

    Plasma spray forming process for production of press moulds which are used for manufacture of articles from plastics was developed. The press moulds were produced by plasma spraying of Cu-Al-Fe-alloy powder on surface of a master model. The master models were made from non-metallic materials with heat resistance below 70 C (wood, gypsum etc). Double cooling system which provides for a control of surface model temperature and quenching conditions of sprayed material was designed. It made possible on the one hand to support model surface temperature below 70 C and on the other hand to provide for temperature conditions of martensite transformation in Cu-Al-system with a fixation of metastable ductile α + β 1 -phase. This allowed to decrease residual stresses in sprayed layer (up to 0,5-2,5 MPa), to increase microhardness of the coating material (up to 1200-1800 MPa) and its ductility (σ B = 70-105 MPa, δ = 6-12 %). This plasma spray forming process makes possible to spray thick layers (5-20 mm and more) without their cracking and deformation. The process is used for a production of press moulds which are applied in shoes industry, for fabrication of toys, souvenirs etc. (author)

  3. Research Facility for Mechanical Press Closed Gap Adjuster

    Directory of Open Access Journals (Sweden)

    A. A. Ancifirov

    2016-01-01

    Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as

  4. The antimatter. Press breakfast 23 may 2000; L'antimatiere. Petit dejeuner de presse 23 mai 2000

    Energy Technology Data Exchange (ETDEWEB)

    Spiro, M; Dejardin, M; Debu, P; Aleksan, R [CEA/Saclay, Dept. d' Astrophysique, de la Physique des Particules, de la Physique Nucleaire et de l' Instrumentation Associee (DAPNIA), 91 - Gif-sur-Yvette (France)

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  5. Biological effects of the ionizing radiation. Press breakfast; Effets biologiques des rayonnements ionisants. Petit dejeuner de presse

    Energy Technology Data Exchange (ETDEWEB)

    Flury-Herard, A [CEA, Direction des Sciences du Vivant, DSV, 75 - Paris (France); Boiteux, S; Dutrillaux, B [CEA/Fontenay-aux-Roses, Direction des Sciences du Vivant, DSV, 92 (France); Toledano, M [CEA Saclay, Direction des Sciences du Vivant, DSV, 91 - Gif-sur-Yvette (France)

    2000-06-01

    This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

  6. Avaliação dos fatores de risco e proteção associados à elevação da pressão arterial em crianças Evaluación de los factores de riesgo y protección asociados a la elevación de la presión arterial en niños Evaluation of risk and protection factors associated with high blood pressure in children

    Directory of Open Access Journals (Sweden)

    Alessandra Vitorino Naghettini

    2010-04-01

    Full Text Available FUNDAMENTO: Estudos epidemiológicos têm mostrado um aumento da prevalência da hipertensão arterial na faixa etária pediátrica. Hoje se sabe que os fatores de risco poderiam ter sido detectados na infância, o que auxiliaria na prevenção da doença. OBJETIVO: Avaliar fatores de risco e de proteção relacionados à elevação da pressão arterial na infância. MÉTODOS: Foram avaliadas crianças de 3 a 10 anos moradoras dos distritos sanitários leste e sudoeste de Goiânia, Goiás. Obtiveram-se os seguintes dados: peso ao nascer, aleitamento materno, história familiar de hipertensão e obesidade, peso, estatura, índice de massa corporal (IMC e pressão arterial. Utilizaram-se os testes de U de Mann-Whitney para comparar a variação da pressão arterial quanto às variáveis descritas. RESULTADOS: Na amostra estudada, 519 crianças foram avaliadas, 246 (47,4% do sexo masculino. Avaliação do IMC identificou 109 (21% com excesso de peso, das quais 53 (10,3% eram obesas. O aleitamento materno predominante e/ou exclusivo por tempo inferior a 6 meses foi encontrado em 242 (51,2%. As médias da pressão sistólica se encontraram significativamente mais elevadas naquelas crianças com aleitamento materno exclusivo e/ou predominante por tempo inferior a 6 meses (p = 0,04, história familiar positiva para hipertensão (p = 0,05 e excesso de peso (p FUNDAMENTO: Estudios epidemiológicos vienen expresando un aumento de la prevalencia de la hipertensión arterial en el grupo de edad pediátrico. Se sabe hoy que los factores de riesgo pudieran haber sido detectados en la niñez, lo que ayudaría en la prevención de la enfermedad. OBJETIVO: Evaluar factores de riesgo y de protección relacionados a la elevación de la presión arterial en la niñez. MÉTODOS: Se evaluaron a niños de 3 a 10 años, vecinos de los distritos sanitarios este y sudoeste de Goiânia, Goiás. Se obtuvieron los siguientes datos: peso al nacer, lactancia materna, historia

  7. Results and problems in the development of machines employed in pressing technology

    Energy Technology Data Exchange (ETDEWEB)

    Dietrich, P; Hinne, H; Linke, L; Nerger, R

    1980-08-01

    Features specifications and technical improvements of nine GDR made briquetting presses from the Zemag Zeitz company. Briquetting presses have been produced by the company for more than 100 years, the present capacity of the machines ranges from 5.1 t/h to 20.4 t/h of nominal briquet production. Development trends are directed toward larger presses. The prototype PSA 400, based on the design of the four channel press PSA 300, will be tested in industrial operation during 1980/81. Various technical details on the general briquetting press design are enumerated, including experiences gained with steam or electric power operated presses, regulation of the pressing speed with a patented switch gear system, maintenance of crank gear bearings, greasing of steam driven presses, investigation of crack damages to the machine block, further measures for reducing wear of the pressing channel and mechanized welding methods for the channel overhaul. (In German)

  8. Mechanical Properties of Copper Processed by Equal Channel Angular Pressing

    Science.gov (United States)

    Sülleiová, K.; Ballóková, B.; Besterci, M.; Kvačkaj, T.

    2017-12-01

    The development of the nanostructure in commercial pure copper and the strength and ductility after severe plastic deformation (SPD) with the technology of equal channel angular pressing (ECAP) are analysed. Experimental results and analyses showed that both strength and ductility can be increased simultaneously by SPD. The final grain size decreased from the initial 50μm by SPD to 100-300 nm after 10 passes. An increase of the ductility together with an increase of strength caused by SPD are explained by a strong grain refinement and by a dynamic equilibrium of weakening and strengthening, and it is visible on the final static tensile test stress-strain charts.

  9. NIC (Nuclear Industry in China) exhibition. Press file

    International Nuclear Information System (INIS)

    1998-01-01

    Framatome participated to the NIC exhibition which took place in Beijing (China) on March 1998. This press dossier was distributed to visitors. It presents in a first part the activities of the Framatome group in people's republic of China (new constructions (Daya Bay, Ling Ao project), technological cooperation and contracts in the nuclear domain, technology transfers in the domain of nuclear fuels, activities and daughter companies in the domain of industrial equipments, Framatome Connectors International (FCI) daughter company in the domain of connectors engineering). Then, the general activities of Framatome in the nuclear, industrial equipment, and connectors engineering domains are summarized in the next 3 parts. (J.S.)

  10. The pressing energy innovation challenge of the US National Laboratories

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Bin-Nun, Amitai Y.; Narayanamurti, Venkatesh

    2016-10-01

    Accelerating the development and deployment of energy technologies is a pressing challenge. Doing so will require policy reform that improves the efficacy of public research organizations and strengthens the links between public and private innovators. With their US$14 billion annual budget and unique mandates, the US National Laboratories have the potential to critically advance energy innovation, yet reviews of their performance find several areas of weak organizational design. Here, we discuss the challenges the National Laboratories face in engaging the private sector, increasing their contributions to transformative research, and developing culture and management practices to better support innovation. We also offer recommendations for how policymakers can address these challenges.

  11. Press Manipulation and Its Negative Impact on the Youth

    Directory of Open Access Journals (Sweden)

    Ioana Manea

    2010-12-01

    Full Text Available Nowadays, manipulation may be regarded as an essential instrument of the “mass industrial society”, aiming at the conclusion of certain agreements that are convenient to the issuing party, turning to deceit with falsified arguments, as well as to appeals to emotional or non-rational components. The particular forms that it takes in various fields of social life may be found anywhere, from the political form to the economic one. Press strategies have the capacity of manipulating the young consumer’s behaviour, generating numerous negative effects on their everyday life.

  12. Clay characterization for making pressed and burned blocks

    International Nuclear Information System (INIS)

    Alexandre, J.; Silva, C.L. de A.P. e

    2012-01-01

    The municipality of Campos dos Goytacazes, located in the state of Rio de Janeiro, at 275 km from the capital, are the largest industrial ceramic state and he has over 100 unionized industries. The production of these industries is based on tiles, building blocks and bricks. Seeking the improvement and diversification of production, the North Fluminense State University has 18 years working in partnership with local industry, with students and teachers. One of the researches is the production of blocks pressed and burned. In this work are presented in many lab tests performed, morphology and some of technological properties. (author)

  13. [Cigarette and alcohol advertising in the Swiss free press].

    Science.gov (United States)

    Olivier, Jacques

    2014-11-26

    Tobacco and alcohol are ordinary consumer goods that are still two overriding preventable causes of death in Switzerland. Massive advertising supports their selling and contributes to maintain a major public health problem up to date. The widely read free press represents an interesting advertising mean. The study of tobacco and alcohol advertisements published in the free newspaper 20 minutes through the year 2012 gives us a good idea of these products' advertising strategies. Compared to those for alcohol, the cigarette advertisements are more numerous, more suggestive and dealing with emotions. The themes proposed respond to young people's expectations in order to incline them to smoke, whereas positive images encourage to keep on smoking.

  14. Hot pressing of uranium nitride and mixed uranium plutonium nitride

    International Nuclear Information System (INIS)

    Chang, J.Y.

    1975-01-01

    The hot pressing characteristics of uranium nitride and mixed uranium plutonium nitride were studied. The utilization of computer programs together with the experimental technique developed in the present study may serve as a useful purpose of prediction and fabrication of advanced reactor fuel and other high temperature ceramic materials for the future. The densification of nitrides follow closely with a plastic flow theory expressed as: d rho/ dt = A/T(t) (1-rho) [1/1-(1-rho)/sup 2/3/ + B1n (1-rho)] The coefficients, A and B, were obtained from experiment and computer curve fitting. (8 figures) (U.S.)

  15. STS-114: Discovery Crew Post Landing Press Briefing

    Science.gov (United States)

    2005-01-01

    The crew of the STS-114 Discovery is shown during a post landing press briefing. Commander Collins introduces the crew members who consist of Pilot Jim Kelley, Mission Specialist Soichi Noguchi from JAXA, Steve Robinson, Mission Specialist and Charlie Camarda, Mission Specialist. Steve Robinson answers a question from the news media about the repair that he performed in orbit, and his feelings about being back in his hometown of California. Commander Collins talks about the most significant accomplishment of the mission. The briefing ends as each crewmember reflects on the Space Shuttle Columbia tragedy and expresses their personal thoughts and feelings as they re-entered the Earth's atmosphere.

  16. Dynamic balance abilities of collegiate men for the bench press.

    Science.gov (United States)

    Piper, Timothy J; Radlo, Steven J; Smith, Thomas J; Woodward, Ryan W

    2012-12-01

    This study investigated the dynamic balance detection ability of college men for the bench press exercise. Thirty-five college men (mean ± SD: age = 22.4 ± 2.76 years, bench press experience = 8.3 ± 2.79 years, and estimated 1RM = 120.1 ± 21.8 kg) completed 1 repetition of the bench press repetitions for each of 3 bar loading arrangements. In a randomized fashion, subjects performed the bench press with a 20-kg barbell loaded with one of the following: a balanced load, one 20-kg plate on each side; an imbalanced asymmetrical load, one 20-kg plate on one side and a 20-kg plate plus a 1.25-kg plate on the other side; or an imbalanced asymmetrical center of mass, 20-kg plate on one side and sixteen 1.25-kg plates on the other side. Subjects were blindfolded and wore ear protection throughout all testing to decrease the ability to otherwise detect loads. Binomial data analysis indicated that subjects correctly detected the imbalance of the imbalanced asymmetrical center of mass condition (p[correct detection] = 0.89, p < 0.01) but did not correctly detect the balanced condition (p[correct detection] = 0.46, p = 0.74) or the imbalanced asymmetrical condition (p[correct detection] = 0.60, p = 0.31). Although it appears that a substantial shift in the center of mass of plates leads to the detection of barbell imbalance, minor changes of the addition of 1.25 kg (2.5 lb) to the asymmetrical condition did not result in consistent detection. Our data indicate that the establishment of a biofeedback loop capable of determining balance detection was only realized under a high degree of imbalance. Although balance detection was not present in either the even or the slightly uneven loading condition, the inclusion of balance training for upper body may be futile if exercises are unable to establish such a feedback loop and thus eliciting an improvement of balance performance.

  17. Tribologic analysis and technical innovation for rotary molding press

    International Nuclear Information System (INIS)

    Luo Wei; Bai Yumeng; Dai Xingjian

    2012-01-01

    The rotary molding press R53C-Y is the key facility in the compression molding working procedure of the nu clear fuel pellets. Its main compression assembly called the upper compression roller frame has been worn seriously during the production. At first, the mechanical model of the upper compression roller assembly was established for analysis and calculation physical strength. Then the wear causations of the upper compression roller frame were analyzed, and the existent problems of central lubrication system were discussed. Finally, Oil-air central lubrication system was designed considering the characteristic of nuclear fuel pellets production. (authors)

  18. Kustomoitu responsiivinen WordPress-sivusto suomalaiselle Toisenlainen-elokuvalle

    OpenAIRE

    Räsänen, Kati

    2016-01-01

    Opinnäytetyö kertoo Toisenlainen-nimiselle suomalaiselle elokuvalle toteutetusta verkkosivuprojektista. Sivuston pohjana käytettiin WordPress-sisällönhallintajärjestelmää ja sivuston teossa huomioitiin sen skaalautuvuus sekä käytettävyys eri päätelaitteilla. Tutkimusraportissa käsitellään myös tarkemmin responsiivista verkkosivukehitystä sekä sitä, millaisia uusia ajatus- ja toimintamalleja se verkkosivujen tekijöiltä vaatii. Lisäksi raportissa käydään läpi responsiiviseen kehitykseen lii...

  19. 'Combating' tropical diseases in the German colonial press.

    Science.gov (United States)

    Correa, Sílvio Marcus de Souza

    2013-03-01

    This article shows how much certain German language newspapers were a vehicule for reporting to the lay public on 'combating' tropical diseases. Through the press, immigrants and their descendents in Brazil were informed not only about the diseases which afflicted German colonists in Africa, but also about measures concerning sanitation, prophylaxis and experiments with tropical medicine, etc. Based on hemerographic sources, it shows how successful the overseas German communities were in sharing their experiences regarding health in tropical and/or sub-tropical regions.

  20. FILMING OF 'CONTACT' AT LC39 PRESS SITE

    Science.gov (United States)

    1997-01-01

    Warner Bros.' cast and crew are filming scenes for the movie 'Contact' at Kennedy Space Center's Launch Complex 39 Press Site on January 30. The screenplay for 'Contact' is based on the best- selling novel by the late astronomer Carl Sagan. The cast includes Jodie Foster, Matthew McConaughey, John Hurt, James Woods, Tom Skerritt, David Morse, William Fichtner, Rob Lowe and Angela Bassett. Described by Warner Bros. as a science fiction drama, 'Contact' will depict humankind's first encounter with evidence of extraterrestrial life.

  1. Application of exopolysaccharides to improve the performance of ceramic bodies in the unidirectional dry pressing process

    Science.gov (United States)

    Caneira, Inês; Machado-Moreira, Bernardino; Dionísio, Amélia; Godinho, Vasco; Neves, Orquídia; Dias, Diamantino; Saiz-Jimenez, Cesareo; Miller, Ana Z.

    2015-04-01

    Ceramic industry represents an important sector of economic activity in the European countries and involves complex and numerous manufacturing processes. The unidirectional dry pressing process includes milling and stirring of raw materials (mainly clay and talc minerals) in aqueous suspensions, followed by spray drying to remove excess water obtaining spray-dried powders further subjected to dry pressing process (conformation). However, spray-dried ceramic powders exhibit an important variability in their performance when subjected to the dry pressing process, particularly in the adhesion to the mold and mechanical strength, affecting the quality of the final conformed ceramic products. Therefore, several synthetic additives (deflocculants, antifoams, binders, lubricants and plasticizers) are introduced in the ceramic slips to achieve uniform and homogeneous pastes, conditioning their rheological properties. However, an important variability associated with the performance of the conformed products is still reported. Exopolysaccharides or Extracellular Polymeric Substances (EPS) are polymers excreted by living organisms, such as bacteria, fungi and algae, which may confer unique and potentially interesting properties with potential industrial uses, such as viscosity control, gelation, and flocculation. Polysaccharides, such as pullulan, gellan, carrageenan and xanthan have found a wide range of applications in food, pharmaceutical, petroleum, and in other industries. The aim of this study was the assessment of exopolysaccharides as natural additives to optimize the performance of spray-dried ceramic powders during the unidirectional dry pressing process, replacing the synthetic additives used in the ceramic production process. Six exopolysaccharides, namely pullulan, gellan, xanthan gum, κappa- and iota-carrageenan, and guar gum were tested in steatite-based spray-dried ceramic powders at different concentrations. Subsequently, these ceramic powders were

  2. A baixa estatura leve está associada ao aumento da pressão arterial em adolescentes com sobrepeso La baja estatura leve está asociada al aumento de la presión arterial en adolescentes con sobrepeso Mild stunting is associated with higher blood pressure in overweight adolescents

    Directory of Open Access Journals (Sweden)

    Ana Paula Grotti Clemente

    2012-01-01

    Full Text Available FUNDAMENTO: Estudos têm demonstrado que a desnutrição pré/pós-natal leva a um maior risco de doenças não transmissíveis, como diabetes, hipertensão e obesidade na idade adulta. OBJETIVO: Determinar se os adolescentes com sobrepeso e desnutrição leve [escores-Z altura/idade (HAZ na faixa de -2] têm pressão arterial mais elevada do que os indivíduos com sobrepeso e com estatura normal (HAZ > -1. MÉTODOS: Os participantes foram classificados como de baixa estatura leve ou de estatura normal, e estratificados de acordo com os percentis de massa corporal para a idade, como sobrepeso, peso normal ou abaixo do peso. As pressões arteriais sistólica (PAS e diastólica (PAD foram determinadas de acordo com as diretrizes e a gordura abdominal foi analisada por absorciometria de dupla emissão de raios-X. RESULTADOS: Indivíduos com baixa estatura leve e sobrepeso apresentaram valores mais elevados da PAD (p = 0,001 do que suas contrapartes de baixo peso (69,75 ± 12,03 e 54,46 ± 11,24 mmHg, respectivamente, mas semelhantes àqueles com IMC normal. Não foram encontradas diferenças nos valores de PAD em indivíduos normais, indivíduos com sobrepeso e com baixo peso entre os grupos de estatura normal. Foi encontrado um aumento na PAS (p = 0,01 entre os indivíduos com baixa estatura leve quando comparados os indivíduos com sobrepreso com suas contrapartes de baixo peso e IMC normal (114,70 ± 15,46, 97,38 ± 10,87 e 104,72 ± 12,24 mmHg, respectivamente. Embora não tenham sido observadas diferenças nas médias de PAS entre os grupos de baixa estatura leve e estatura normal, foi encontrado um intercepto significativo (p = 0,01, revelando maior PAS entre os indivíduos com baixa estatura leve. Houve correlação entre PAS e gordura abdominal (r = 0,42, ρ = 0,02 no grupo com baixa estatura leve. CONCLUSÃO: Indivíduos de baixa estatura leve com sobrepeso apresentaram maior PAS do que os de estatura normal e sobrepeso. Esses achados

  3. Preparation and microstructure of hot-pressed YIG

    International Nuclear Information System (INIS)

    Abdul Halim Shaari; Mansor Hashim; Sidek Haji Abd Aziz

    1992-01-01

    Bulk magnetic ceramics such as yttrium-iron-garnet (YIG) and nickel-zinc ferrite were prepared by the conventional-firing and hot-press techniques. Pre-sintering and sintering, both in air, were carried out at temperature ≥ 1200 0 C. Initial density and microstructural measurements show that the high density samples with uniform grain size can be readily achieved by hot-pressing. The well-defined microstructures, the high density attained. The agreement of saturation magnetization 4πMs values and the high resistivities indicated that the optimized preparation conditions for conventional firing yielded yttrium-iron-garnet of good quality. Quenched and isochronally annealed, the YIG samples were also found to retain their room-temperature saturation-magnetization and resonance linewidth values after any single heat treatment. However, the electrical resistivity and the effective linewidth clearly exhibited isochronal recovery. A possible model to explain this behaviour and its implications on microwave applications are discussed. Ferrites of the type MFe 2 O 4 where M=Mg, Mn, Co, Fe, Cu, Zn and Cd and of the type Ni1-2xSnxFe 2 O4 have also been prepared and their properties are being studied

  4. Climate change and daily press : Italy vs Usa parallel analysis

    International Nuclear Information System (INIS)

    Borrelli, G.; Mazzotta, V.; Falconi, C.; Grossi, R.; Farabollini, F.

    1996-06-01

    Among ENEA (Italian National Agency for New Technologies, Energy, and the Environment) activities, one deals with analysis and strategies of environmental information. A survey of four daily newspaper coverage, on an issue (Global Climate Change) belonging to this area, has been realized. The involved newspapers are: two Italian ones, namely 'La Repubblica' and 'Il Corriere della Sera', two North-American ones, namely 'New York Times' and 'Washington Post'. Purpose of the work was that of detecting the qualitative and quantitative level of consciousness of the Italian press via a comparison with the North-American press, notoriously sensible and careful on environmental issues. The number of articled analyzed is partitioned in the following numerical data: 319 for the 'New York Times', 309 for the 'Washington Post', 146 for the 'Corriere della Sera', 81 articles for 'La Repubblica'. The time period covered for the analysis spans from 1989, initiatic year for the organization of the 1992 Rio Conference, to December 1994, deadline date for the submission of national

  5. Treatment of zircaloy cladding hulls by isostatic pressing

    International Nuclear Information System (INIS)

    Tegman, R.; Burstroem, M.

    1984-12-01

    A method for the treatment of Zircaloy fuel hulls is proposed. It involves hot isostatic pressing (HIP) for making large, completely densified metallic bodies of the waste. The hulls are packed into a bellows-shaped container of steel. On packing the fuel hulls give a filling factor of only 14%, which is too low for non-deformable compaction in a normal container, but by using a belloped container, a non-deformable compaction can be obtained without any pretreatment of the hulls. Fully dense and mechanically strong blocks of Zircaloy can be fabricated by holding them at temperatures of around 1000 degrees C for three hours. It is also feasible to incorporate the other metallic parts of the fuel bundle, such as top and bottom tie plates and spacers, in the pressing. The HIP-densified hulls provide an effective means of self-containment of radioactive waste due to the excellent corrosion resistance of Zircaloy. A waste loading factor of close to 100% can be realized. Futher, a volume reduction factor of 7 and a surface reduction factor of aout 250 for a 1-ton canister can be achieved. Equilibrium calculations have shown that tritium present in the hulls can quantitatively be contained in the HIPed block. A study has been made of a possible process for industrilscale use. (Author)

  6. Diachronic changes in word probability distributions in daily press

    Directory of Open Access Journals (Sweden)

    Stanković Jelena

    2006-01-01

    Full Text Available Changes in probability distributions of individual words and word types were investigated within two samples of daily press in the span of fifty years. Two samples of daily press were used in this study. The one derived from the Corpus of Serbian Language (CSL /Kostić, Đ., 2001/ that covers period between 1945. and 1957. and the other derived from the Ebart Media Documentation (EBR that was complied from seven daily news and five weekly magazines from 2002. and 2003. Each sample consisted of about 1 million words. The obtained results indicate that nouns and adjectives were more frequent in the CSL, while verbs and prepositions are more frequent in the EBR sample, suggesting a decrease of sentence length in the last five decades. Conspicuous changes in probability distribution of individual words were observed for nouns and adjectives, while minimal or no changes were observed for verbs and prepositions. Such an outcome suggests that nouns and adjectives are most susceptible to diachronic changes, while verbs and prepositions appear to be resistant to such changes.

  7. Gender violence news in British and American press

    Directory of Open Access Journals (Sweden)

    Sara Bustinduy

    2016-03-01

    Full Text Available This study aims to prove which qualities, from the British and United States actual press, are more adequate for gender violence issues, comparing news on the same stories. It is evident the influence of mass media on public opinion and, therefore, the responsibility that written press has on gender violence messages, avoiding sensationalism. Psycholinguistic studies have established the relation language-thought, so language used in journalism is crucial. Following the belief that newspapers considered more liberal and independent will lead to a better treatment than traditional ones considered to be more reluctant to change, journals have been selected. Furthermore, different cultures can be as objective and respectful but maybe less committed with the issue, as it may arise from the samples. There have been emerging ethic codes giving guidelines to journalists, including discrimination, and more specific on gender sensitive reporting. Therefore, the objective to improve public opinion information, stepping away from stereotypes and oversimplifications, is substantial, and will undoubtedly result in a better understanding of equality.

  8. Incineration ashes conditioning by isostatic pressing and melting

    International Nuclear Information System (INIS)

    Jouan, A.; Ouvrier, N.; Teulon, F.

    1990-01-01

    Alpha-bearing solid incineration wastes are conditioned for two principal reasons: to enhance the quality of the finished product for long-term storage, and to reduce the total waste volume. Isostatic pressing parameters were defined using containers 36 mm in diameter; the physicochemical properties of the compacted ashes were determined with 140 mm diameter containers and industrial feasibility was demonstrated with a large (300 mm diameter) container. Two types of ashes were used: ashes fabricated at Marcoule (either in devices developed by the CEA for the MELOX project with a standard MELOX composition, or by direct incineration at COGEMA's UP1 plant) and fly ash from a domestic waste incinerator. A major engineering study was also undertaken to compare the three known ash containment processes: isostatic pressing, melting, and cement-resin matrix embedding. The flowsheet, operational chronology and control principles were detailed for each process, and a typical plant layout was defined to allow comparisons of both investment and operating costs

  9. Effects of different vibration exercises on bench press.

    Science.gov (United States)

    Marín, P J; Torres-Luque, G; Hernández-García, R; García-López, D; Garatachea, N

    2011-10-01

    This study was undertaken to analyze the effects of different vibration recovery strategies via feet or hands on the number of repetitions performed and on mean velocity, peak velocity and blood lactate concentration during consecutive bench-press sets. 9 elite judo athletes performed 3 sets of bench press at 60% of one-repetition maximum (1RM), leading to failure and allowing a 180 s rest period between sets. During the rest period, 1 of the 3 following procedures was performed: 150 s rest plus 30 s push-up vibration exercise (Push-up), 150 s rest plus 30 s squat vibration exercise (Squat) or 180 s only rest (Passive). Statistical analysis revealed that the Squat condition resulted in a significant increase in the number of repetitions achieved, in comparison with all other rest strategies. However, kinematic parameters and blood lactate concentration were not affected by vibration. These data suggest that a vibration stimulus applied to the feet, between sets, can result in positive improvements in upper body resistance exercise performance. Although the mechanisms are not fully understood, this positive effect of vibration could be due to an increased motor cortex excitability and voluntary drive. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Kennedy Space Center Press Site (SWMU 074) Interim Measure Report

    Science.gov (United States)

    Applegate, Joseph L.

    2015-01-01

    This report summarizes the Interim Measure (IM) activities conducted at the Kennedy Space Center (KSC) Press Site ("the Press Site"). This facility has been designated as Solid Waste Management Unit 074 under KSC's Resource Conservation and Recovery Act Corrective Action program. The activities were completed as part of the Vehicle Assembly Building (VAB) Area Land Use Controls Implementation Plan (LUCIP) Elimination Project. The purpose of the VAB Area LUCIP Elimination Project was to delineate and remove soil affected with constituents of concern (COCs) that historically resulted in Land Use Controls (LUCs). The goal of the project was to eliminate the LUCs on soil. LUCs for groundwater were not addressed as part of the project and are not discussed in this report. This report is intended to meet the Florida Department of Environmental Protection (FDEP) Corrective Action Management Plan requirement as part of the KSC Hazardous and Solid Waste Amendments permit and the U.S. Environmental Protection Agency's (USEPA's) Toxic Substance Control Act (TSCA) self-implementing polychlorinated biphenyl (PCB) cleanup requirements of 40 Code of Federal Regulations (CFR) 761.61(a).

  11. Muscle synergies during bench press are reliable across days.

    Science.gov (United States)

    Kristiansen, Mathias; Samani, Afshin; Madeleine, Pascal; Hansen, Ernst Albin

    2016-10-01

    Muscle synergies have been investigated during different types of human movement using nonnegative matrix factorization. However, there are not any reports available on the reliability of the method. To evaluate between-day reliability, 21 subjects performed bench press, in two test sessions separated by approximately 7days. The movement consisted of 3 sets of 8 repetitions at 60% of the three repetition maximum in bench press. Muscle synergies were extracted from electromyography data of 13 muscles, using nonnegative matrix factorization. To evaluate between-day reliability, we performed a cross-correlation analysis and a cross-validation analysis, in which the synergy components extracted in the first test session were recomputed, using the fixed synergy components from the second test session. Two muscle synergies accounted for >90% of the total variance, and reflected the concentric and eccentric phase, respectively. The cross-correlation values were strong to very strong (r-values between 0.58 and 0.89), while the cross-validation values ranged from substantial to almost perfect (ICC3, 1 values between 0.70 and 0.95). The present findings revealed that the same general structure of the muscle synergies was present across days and the extraction of muscle synergies is thus deemed reliable. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Means of temporal expressions in newspaper news and press report

    Directory of Open Access Journals (Sweden)

    Čutura Ilijana R.

    2016-01-01

    Full Text Available This paper analyses most frequent linguistic means for expressing the temporal frame in the printed news and press reports. With structuralism as a chosen theoretical framework, the approach of the research is qualitative and stylistic. Since the study belongs to the field of functional stylistics, the primary methods used in the study were functional-stylistic and linguistic-stylistic ones. As the study focuses on two newspaper genres, comparative-stylistic method was used as well. The analysis has been conducted on concrete linguistic excerpts from Serbian daily newspapers published throughout Serbia from 2008 to 2015. The aims of the paper are to show model of expressing temporal frame in contemporary Serbian newspapers. This paper provides an overview of the characteristics of model and the types of temporal expression as well as their variations in contemporal Serbian newspapers. The paper also aims to determine the differencies between printed news and press reports by the choice of temporal expressions. It is shown that there is a tendency of changing schematized structure of these informative genres and some innovation in relation to the choice of linguistic means for expessing the meaning of temporally close events. The research is a contribution to journalism stylistics, more precisely to the Serbian language newspaper stylistics, and also contributes to the study of linguistic and stylistic characteristics of non-literary texts. The study is also relevant because it describes the use of adverbs and adverbial expressions in the journalistic style.

  13. Feasibility of tailoring of press formed thermoplastic composite parts

    Science.gov (United States)

    Sinke, J.

    2018-05-01

    The Tailor Made Blank concept is widely accepted in the production of sheet metal parts. By joining, adding and subtracting materials, and sometimes even applying different alloys, parts can be produced more efficiently by cost and/or weight, and new design options have been discovered. This paper is about the manufacture of press formed parts of Fibre Reinforced Thermoplastics and the evaluation whether the Tailoring concept, though adapted to the material behavior of FRTP, can be applied to these composites as well. From research, the first results and ideas are presented. One of the ideas is the multistep forming process, creating parts with thickness variations and combinations of fibre orientations that are usually not feasible using common press forming strategies. Another idea is the blending of different prepreg materials in one component. This might be useful in case of specific details, like for areas of mechanical fastening or to avoid carbon/metal contact, otherwise resulting in severe corrosion. In a brief overview, future perspectives of the potential of the Tailoring concept are presented.

  14. Precision Force Control for an Electro-Hydraulic Press Machine

    Directory of Open Access Journals (Sweden)

    Hong-Ming Chen

    2014-08-01

    Full Text Available This thesis is primarily intended to design a PC-based control system to control the force of an electro-hydraulic servo press system for implementing precision force control. The main feature is to develop a composite control by using the relief valve and the flow servo valve. Using feedback from a force sensor, a fuzzy controller was designed with LabVIEW software as the system control core for achieving a precision force control for the hydraulic cylinder on its travel and output. The weakness of hydraulic systems is that hydraulic oil is compressible and prone to leaking, and its characteristics can vary with oil temperature, thus making it difficult for a general linear controller to achieve accurate control. Therefore, a fuzzy controller was designed with LabVIEW along with a NI-PCI_6221 interface card and a load cell to control the servo valve flow and the relief valve to control the pressure source. The testing results indicate that accurate force control output of an electro-hydraulic servo press system can be obtained.

  15. Human Rights and Consership in the Portuguese Press

    Directory of Open Access Journals (Sweden)

    Isabel Salema Morgado

    2007-06-01

    Full Text Available This article analyzes the censorship system existing in Portugal in the XVIII century, when a rigid jurisdiction with respect to press freedom was instituted by Portuguese State and how “Gazeta de Lisboa” succeeded in informing its public about the revolutionary events that took place in France during the year of 1789. Many years after that, in 1948, other important event – the Universal Declaration of Human Rights approved by the United Nations General Assembly, did not receive the attention of Portuguese Press. Of the 15 newspapers and magazines with wider circulation that were consulted, only three published the news of the approval. Also I did not fi nd in any of the archives documents which proved the exercising of censorship or punishment, by the dictatorial regime of Salazar, in the form of disciplinary processes against the newspapers with relation to the publication of news referring to the Declaration. I am inclined toward the theory of the act of self-censorship imposed by the editor on himself, in both events.

  16. LSA glass-ceramic tiles made by powder pressing

    International Nuclear Information System (INIS)

    Figueira, F.C.; Bertan, F.M.; Riella, H.G.; Uggioni, E.; Bernardin, A.M.

    2009-01-01

    A low cost alternative for the production of glass-ceramic materials is the pressing of the matrix glass powders and its consolidation simultaneously with crystallization in a single stage of sintering. The main objective of this work was to obtain LSA glass ceramics with low thermal expansion, processed by pressing and sintering a ceramic frit powder. The raw materials were homogenized and melted (1480 deg C, 80min), and the melt was poured in water. The glass was chemically (XRF and AAS) and thermally (DTA, 10 deg C/min, air) characterized, and then ground (60min and 120min). The ground powders were characterized (laser diffraction) and compressed (35MPa and 45MPa), thus forming four systems. The compacts were dried (150 deg C, 24h) and sintered (1175 deg C and 1185 deg C, 10 deg C/min). Finally, the glass-ceramics were characterized by microstructural analysis (SEM and XRD), mechanical behavior (σbending) and thermal analysis (α). The best results for thermal expansion were those for the glass-ceramics processed with smaller particle size and greater compaction pressure. (author)

  17. Does community participation set the local press agenda? A view on deliberative and civic practices in the Portuguese press

    OpenAIRE

    Ferreira, Gil Baptista

    2013-01-01

    What are journalists’ perceptions of the citizen’s role in democratic life? What is the role that journalists attribute to the public in the construction of the news agenda? The main goal of this study is to investigate the relationship between the local press, citizens and civic practices. It takes as starting point a dual theoretical approach, the theory of deliberative democracy and the public journalism movement, to assess the scope of the concept of “deliberative journalism.” Under the a...

  18. Ireland’s Press Ombudsman, John Horgan, on accountability, regulation and redress: Where do press councils stand?

    OpenAIRE

    Horgan, John

    2012-01-01

    In recent years, the creation of a number of press councils in Europe and elsewhere, as well as the concurrent appointment of internal ombudsmen or readers’ representatives in many significant newspapers, particularly in the United States, is a clear response to a growing public perception that there is a need for an appropriate level of accountability for the print media. It is fair to assume that this is related, in part, to a public perception that there is a need for remedies for abuses o...

  19. International Commercial Contracts, by Giuditta Cordero Moss. (Cambridge: Cambridge University Press, 2014)

    DEFF Research Database (Denmark)

    Lando, Ole

    2015-01-01

    Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713......Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713...

  20. Reporters on the Battlefield. The Embedded Press System in Historical Context

    National Research Council Canada - National Science Library

    Paul, Christopher; Kim, James J

    2004-01-01

    While the history of relations between the press and the military predates modern journalism, much of what had gone before was neutralized by the horrible press-military breakdown that occurred during U.S...

  1. A Comparison of Coverage of Speech and Press Verdicts of Supreme Court.

    Science.gov (United States)

    Hale, F. Dennis

    1979-01-01

    An analysis of the coverage by ten newspapers of 20 United States Supreme Court decisions concerning freedom of the press and 20 decisions concerning freedom of speech revealed that the newspapers gave significantly greater coverage to the press decisions. (GT)

  2. Processing of surrogate nuclear fuel pellets for better dimensional control with dry bag isostatic pressing

    Energy Technology Data Exchange (ETDEWEB)

    Hoggan, Rita E., E-mail: Rita.hoggan@inl.gov; Zuck, Larry D., E-mail: Larry.zuck@inl.gov; Cannon, W. Roger, E-mail: cannon@rutgers.edu; Lessing, Paul A., E-mail: p.a.l.2@hotmail.com

    2016-12-15

    A study of improved methods of processing fuel pellets was undertaken using ceria and zirconia/yttria/alumina as surrogates. Through proper granulation, elimination of fines and vertical vibration (tapping) of the parts bag prior to dry bag isostatic pressing (DBIP), reproducibility of diameter profiles among multiple pellets of ceria was improved by almost an order of magnitude. Reproducibility of sintered pellets in these studies was sufficient to allow pellets to be introduced into the cladding with a gap between the pellet and cladding on the order of 50 μm to 100 μm but not a uniform gap with tolerance of ±12 μm as is currently required. Deviation from the mean diameter along the length of multiple pellets, and deviation from roundness, decreased after sintering. This is not generally observed with dry pressed pellets. Sintered shrinkage was uniform to ±0.05% and thus, as an alternative, pellets may be machined to tolerance before sintering, thus avoiding the waste associated with post-sinter grinding. - Highlights: • Three methods of granule preparation for two different powder sources were outlined and compared using tap density curves. • A dry bag isostatic press was used to fabricate pellets and longer rods. Thus longer pellets could be fabricated by this technique. • Vertical vibrations to pack granules decreased variation in dimensions from pellet to pellet by a factor of nine. • Sintering shrinkage varied by only 0.1% along the length of a rod. Thus green machining prior to sintering could result in tight tolerances.

  3. Pressing and tubes rolling out of tungsten of gas phase deposition

    International Nuclear Information System (INIS)

    Korolev, Yu.M.; Kosachev, L.S.; Semiletov, S.S.; Solov'ev, V.F.; Sorkin, V.A.

    1987-01-01

    The possibility of increasing ductility of tubes of tungsten fluoride using heat treatment and plastic deformation- pressing and thermal rolling are studied. When designing the processes of treatment it should be necessarily taken into account that structural state of initial blanks as well as the ratio of deformations in radial and tangential directions under pressing with a rigid needle strongly affects technological properties of pressed tubes. The columnar structure of blanks is undesirable for its embrittlement affects the pressed tubes

  4. Fabrication of fully ceramic microencapsulated fuel by hot pressing

    International Nuclear Information System (INIS)

    Lee, H. G.; Kim, D. J; Park, J. Y.; Kim, W. J.; Lee, S. J

    2014-01-01

    Fully ceramic microencapsulated(FCM) nuclear fuel is one of the recently suggested concept to enhance stability nuclear fuel itself. The requirements to increase the accident tolerance of nuclear fuel are mainly two parts: First, the performance has to be maintained compared to the existing UO 2 nuclear fuel and zircaloy cladding system under the normal operation condition. Second, under the severe accident condition, the high temperature structural integrity has to be kept and the generation rate of hydrogen has to be decrease largely. FCM nuclear fuel consists of tristructural isotropic(TRISO) fuel particle and SiC matrix. The relative thermal conductivity of the SiC matrix as compared to UO 2 is quite good, yielding as-irradiated fuel centerline temperature compared to high temperature for the existing fuel leading to reduced stored energy in the core and reduced operational release of fission products from the fuel. Generally SiC ceramics are fabricated via liquid phase sintering due to strong covalent bonding property and low self-diffusivity coefficient. Hot pressing is very effective method to conduct sintering of SiC powder including different second phase. In this study, SiC-matrix composite including TRISO particles were sintered by hot pressing with Al 2 O 3 -Y 2 O 3 additive system. Various sintering condition were investigated to obtain high relative density above 95%. The internal distribution of TRISO particles within SiC-matrix composite was observed by x-ray radiograph. From the analysis of the cross-section of SiC-matrix composite, the fracture of TRISO particles was investigated. In order to uniform distribution of TRISO particle embedded in the SiC matrix, SiC powder overcoating is considered. SiC matrix composite including TRISO was fabricated by hot pressing. FCM pallets with full density were obtained with Al 2 O 3 -Y 2 O 3 additive system. From the microstructure image, the effect of the sintering additive contents and sintering mechanism

  5. Design and testing of a solar photovoltaic operated multi-seeds oil press

    Energy Technology Data Exchange (ETDEWEB)

    Mpagalile, J.J. [Department of Food Science and Technology, Sokoine University of Agriculture, P.O. Box 3006, Morogoro (Tanzania); Hanna, M.A.; Weber, R. [Industrial Agricultural Products Center, University of Nebraska, 209 L.W. Chase Hall, Lincoln, NE 68583-0730 (United States)

    2006-10-15

    Oil expression tests were conducted to evaluate the performance of a novel oil expeller designed and fabricated to operate on a 200W solar photovoltaic (PV) power system as a sole power source. The oil press was designed to press oilseeds meal with intermediate moisture content of 12+/-1% (w.b.) and 0.5-2mm particle sizes. Freshly grated coconuts and ground peanuts were used to determine the oil expression efficiency of the press. The oilseed samples were pressed for 12min with a maximum pressure of 3.0MPa being reached at 6min of pressing for peanuts and 8min of pressing for coconuts. The pressure was then held for the rest of the pressing time. The press attained an average oil expression efficiency of 73% for coconuts and 70% for peanuts. The force-vs.-deformation studies indicated that peanut press meal was compacted at a higher rate as compared to coconuts. The observation on the energy consumption indicated that there was a significant increase (P<0.05) in the specific energy requirement for both coconuts and peanuts after 6min of pressing, which resulted from the solidification of the press cake. An average specific energy of 36.55 and 20.35Wh/kg was recorded for peanuts and coconuts, respectively, after 12min of pressing. (author)

  6. Student Press in American Archives, Fall/Winter 1973-74.

    Science.gov (United States)

    National Council of Coll. Publications Advisers.

    This issue of the "Student Press in America Archives List" contains 100 entries on current issues and information, as well as cases involving student press editors, advisers, student media, and the generic subject of the campus press, emphasizing censorship practices and principles. Information concerning how and where to obtain documents of…

  7. A Low-Cost Auto-Stop Hydraulic Press for Making KBr Disc

    Science.gov (United States)

    Hon, Ping-Kay

    1998-05-01

    A hydraulic press fitted with an adjustable torque wrench, together with a stand made of iron bars will form an auto-stop hydraulic press for making KBr disc in IR studies. Total material cost is about $100. All parts are readily available from the local hardware stores. The modified torque wrench is also useful to replace the lever in the standard laboratory press.

  8. A Simplified Model of an Offset Ram Press for Sunflower Oil ...

    African Journals Online (AJOL)

    This paper presents the theoretical analysis of a simplified model of a ram press. The design of the ram press is based on the classical slider-crank mechanism. A force analysis of the press was performed for several successive positions of the driving lever (handle) and for a range of values of certain dimensionless ...

  9. Type synthesis for 4-DOF parallel press mechanism using GF set theory

    Science.gov (United States)

    He, Jun; Gao, Feng; Meng, Xiangdun; Guo, Weizhong

    2015-07-01

    Parallel mechanisms is used in the large capacity servo press to avoid the over-constraint of the traditional redundant actuation. Currently, the researches mainly focus on the performance analysis for some specific parallel press mechanisms. However, the type synthesis and evaluation of parallel press mechanisms is seldom studied, especially for the four degrees of freedom(DOF) press mechanisms. The type synthesis of 4-DOF parallel press mechanisms is carried out based on the generalized function(GF) set theory. Five design criteria of 4-DOF parallel press mechanisms are firstly proposed. The general procedure of type synthesis of parallel press mechanisms is obtained, which includes number synthesis, symmetrical synthesis of constraint GF sets, decomposition of motion GF sets and design of limbs. Nine combinations of constraint GF sets of 4-DOF parallel press mechanisms, ten combinations of GF sets of active limbs, and eleven combinations of GF sets of passive limbs are synthesized. Thirty-eight kinds of press mechanisms are presented and then different structures of kinematic limbs are designed. Finally, the geometrical constraint complexity( GCC), kinematic pair complexity( KPC), and type complexity( TC) are proposed to evaluate the press types and the optimal press type is achieved. The general methodologies of type synthesis and evaluation for parallel press mechanism are suggested.

  10. The news value of Dutch corporate press releases as a predictor of corporate agenda building power

    NARCIS (Netherlands)

    Schafraad, P.; van Zoonen, W.; Verhoeven, P.

    2016-01-01

    This study focuses on explaining agenda building power of corporate press releases. The purpose of the study is to investigate to what extent news factor theory can be applied to predict whether a press release generates media attention or not. A content analysis of 823 press releases from 30 of the

  11. Distinct neural control of intrinsic and extrinsic muscles of the hand during single finger pressing.

    Science.gov (United States)

    Dupan, Sigrid S G; Stegeman, Dick F; Maas, Huub

    2018-06-01

    Single finger force tasks lead to unintended activation of the non-instructed fingers, commonly referred to as enslaving. Both neural and mechanical factors have been associated with this absence of finger individuality. This study investigates the amplitude modulation of both intrinsic and extrinsic finger muscles during single finger isometric force tasks. Twelve participants performed single finger flexion presses at 20% of maximum voluntary contraction, while simultaneously the electromyographic activity of several intrinsic and extrinsic muscles associated with all four fingers was recorded using 8 electrode pairs in the hand and two 30-electrode grids on the lower arm. The forces exerted by each of the fingers, in both flexion and extension direction, were recorded with individual force sensors. This study shows distinct activation patterns in intrinsic and extrinsic hand muscles. Intrinsic muscles exhibited individuation, where the agonistic and antagonistic muscles associated with the instructed fingers showed the highest activation. This activation in both agonistic and antagonistic muscles appears to facilitate finger stabilisation during the isometric force task. Extrinsic muscles show an activation independent from instructed finger in both agonistic and antagonistic muscles, which appears to be associated with stabilisation of the wrist, with an additional finger-dependent modulation only present in the agonistic extrinsic muscles. These results indicate distinct muscle patterns in intrinsic and extrinsic hand muscles during single finger isometric force pressing. We conclude that the finger specific activation of intrinsic muscles is not sufficient to fully counteract enslaving caused by the broad activation of the extrinsic muscles. Copyright © 2018 Elsevier B.V. All rights reserved.

  12. Effect of Bench Press Load Knowledge on Repetitions, Rating of Perceived Exertion, and Attentional Focus.

    Science.gov (United States)

    Beaudoin, Christina M; Cox, Zachary; Dundore, Tyler; Thomas, Tayler; Kim, Johnathon; Pillivant, Daniel

    2018-02-01

    Beaudoin, CM, Cox, Z, Dundore, T, Thomas, T, Kim, J, and Pillivant, D. Effect of bench press load knowledge on repetitions, rating of perceived exertion, and attentional focus. J Strength Cond Res 32(2): 514-519, 2018-Few studies have examined the role of the teleoanticipation during resistance training. The purpose of this study was to examine the effect of bench press (BP) load knowledge on repetitions completed, ratings of perceived exertion (RPEs), and attentional focus (% associative). Thirty-six recreationally active resistance-trained men (n = 25) and women (n = 11) participated in this study (age = 20.97 ± 1.87 years; ht = 174.12 ± 9.41 cm; and mass = 80.14 ± 14.03 kg). All subjects completed 3 testing sessions: (a) 1 repetition maximum (1RM) BP determination; (b) submaximal BP repetitions to fatigue known load (KL); and (c) submaximal BP repetitions to fatigue unknown load (UL). Known load and UL sessions were randomized and counterbalanced and both completed at 70% 1RM. An estimated weight ratio was computed using the subject's estimate of the UL weight relative to the KL weight. An independent samples t-test revealed no significant testing order difference for the estimated weight ratio. Two-way repeated-measures analysis of variances revealed no significant differences in the number of repetitions (p = 0.63), RPE (p = 0.18), or attentional focus (% associative) (p = 0.93) between the KL and UL conditions. Pearson correlations found a moderate positive association between KL repetitions completed and % associative focus when the UL was completed before the KL. Load knowledge did not influence the number of repetitions, RPE, or attentional focus while completing the BP. Further research examining the use of pacing strategies, RPE, and attentional focus during KL and UL conditions are warranted.

  13. Hot isostatic pressing of glass-zeolite composites

    International Nuclear Information System (INIS)

    Hash, M.C.; Pereira, C.; Lewis, M.A.

    1996-01-01

    Glass-zeolite waste forms are being developed for immobilizing the chloride waste salt generated from the electrometallurgical treatment of spent fuel. Glass-zeolite composites with high densities were made using hot isostatic pressing (HIP) techniques. Processing parameters were investigated to yield desirable structural ceramic properties such as mechanical, chemical, and thermal stability. Limits for these parameters were determined by differential thermal and thermogravimetric analysis. The resulting ceramic properties such as bulk density, open or apparent porosity, and leach resistance were determined. In addition, phase equilibria and particle-size distribution were observed by optical light and electron microscopy. Pre-HIP processing techniques were also studied to ensure intimate mixing of the glass and zeolite powders. Particle size distributions resulting from dry blending procedure are appropriate for needed flow and packing characteristics

  14. Ultrafine grained steels processed by equal channel angular pressing

    International Nuclear Information System (INIS)

    Shin, Dong Hyuk; Park, Kyung-Tae

    2005-01-01

    Recent development of ultrafine grained (UFG) low carbon steels by using equal channel angular pressing (ECAP) and their room temperature tensile properties are reviewed, focusing on the strategies overcoming their inherent mechanical drawbacks. In addition to ferrite grain refinement, when proper post heat treatments are imposed, carbon atom dissolution from pearlitic cementite during ECAP can be utilized for microstructural modification such as uniform distribution of nano-sized cementite particles or microalloying element carbides inside UFG ferrite grains and fabrication of UFG ferrite/martensite dual phase steel. The utilization of nano-sized particles is effective on improving thermal stability of UFG low carbon ferrite/pearlite steel but less effective on improving its tensile properties. By contrast, UFG ferrite/martensite dual phase steel exhibits an excellent combination of ultrahigh strength, large uniform elongation and extensive strain hardenability

  15. THE FRAMING OF RARE DISEASES IN SPANISH PRESS

    Directory of Open Access Journals (Sweden)

    Sebastián Sánchez Castillo

    2014-06-01

    Full Text Available The news frame analysis has become a basic tool to understand the cognitive structures that construct social reality in its many facets. The objective of this research is to reveal the basic frames and generic frames that define the treatment of rare diseases in the Spanish press. The content analysis of 216 news items about rare diseases published in El País, El Mundo and ABC from August 2010 to September 2012 has been determined to a large extent the problem is presented as a complex social reality rather than how a disease more. Human interest based on personalization of information is the most important generic framing. These results may contribute to greater social visibility of the Rare Diseases.

  16. Anglicism in the press of Santiago de Cuba city

    Directory of Open Access Journals (Sweden)

    Yusnel Tabares-Tabares

    2017-06-01

    Full Text Available The preliminary findings from an unfinished investigation having a synchronic approach are presented. The objective of this study is to analyze the English loanwords that appear in the press of Santiago de Cuba city at the beginning of the XX century. This analysis will allow to draw significant conclusions concerning the presence of anglicisms in the Spanish spoken in Cuba. The methodology is based on a random revision of “El Cubano Libre” newspaper, at the time it is counted some aspects, namely: how many anglicisms were found, their typology, grammatical category, their frequency of appearance, and the year they were published in the dictionary of the Spanish Royal Academy.  Among the outstanding results is remarkable that few English loanwords were registered in the dictionary of the Spanish Royal Academy, the topics more profitable to search were those of politics and sport, and the sort of anglicisms more frequent belong to the category of patent loanword.

  17. Press conference bring excitement of geophysical research to the public

    Science.gov (United States)

    Leifert, Harvey

    “A Flare to Remember.” “Starbucks for Starfish.” “Earth's Rotation Slows for El Niño.” What do these catchy headlines have in common? They all resulted from presentations at AGU's Spring Meeting in Boston, Mass. Yes, geophysical science can be big news when presented in a way that is interesting to general audiences.Proof? Well, the “Flare to Remember” headline (in the Dallas Morning News) reported the discovery, via the SOHO spacecraft, that a solar flare had produced, deep inside the Sun, seismic disturbances of a magnitude never experienced on Earth. Researchers Valentina Zharkova of Glasgow University and Alexander Kosovichev of Stanford gave media representatives a preview of their session, supported by visual aids, in the AGU press briefing room.

  18. Cultural Appropriations; Ethnic-Racial Representations; Black Press

    Directory of Open Access Journals (Sweden)

    Maria Angélica Zubaran

    2015-12-01

    Full Text Available This paper investigates the exchange and circulation of ideas in the black diaspora, particularly in the newspaper The Example, mapping and discussing the ethnic-racial and gender representations constructed in the narratives produced by the editors of this newspaper, during the campaign for the construction of a monument to the “Black Mother”. The aim is to analyze how the newspaper’s editors have appropriated texts that circulated in other newspapers about the campaign to the monument of the “Black Mother”, adapted them to their own interests and given them new meanings. From the theoretical approach of Cultural Studies, we understand the black press as a cultural artifact that not only informs but also produces discourses and representations that contribute to the formation of black subjectivities and identities.

  19. Conference/debate on nuclear power. Press file

    International Nuclear Information System (INIS)

    1998-01-01

    This press dossier presents in a digest way the advantages of nuclear power with respect to other energy sources. After a presentation of the worldwide energy resources (electric power demand, fossil-fuel reserves, renewable energies, environmental constraints), the dossier describes the functioning principle of a PWR reactor as a presentation of the French nuclear program (historical aspects, policy, organization of activities, trade, EPR project). In the last part, the sociological aspects of nuclear power are approached: environmental aspects (natural radioactivity, reactors safety, radioactive wastes, environment protection, carbon dioxide and energy production), and public health aspects (principles of radioactivity, dose effects, industrial and scientific applications of radionuclides, nuclear controversy, reactor accidents, legal aspects of radioprotection, safety standards and controls). (J.S.)

  20. Ductility in hot isostatically pressed 250-grade maraging steel

    International Nuclear Information System (INIS)

    German, R.M.; Smugeresky, J.E.

    1978-01-01

    Prealloyed 250-grade maraging steel powder produced by the rotating electrode process was fully consolidated by hot isostatic pressing (HIP) at 1100 and 1200 0 C. The strength following aging (3 h at 480 0 C) equalled that of wrought material; however, ductility was negligible. This lack of ductility in the powder metallurgy product was traced to titanium segregation which occurred at the powder surface during power production. The formation of a titanium intermetallic at the prior particle boundaries during aging caused failure at low plastic strains. Altered aging treatments successfully broke up the embrittling film and resulted in a significant ductility recovery for the HIP material. Analysis of the fracture process indicates that further ductility gains are possible by reducing the titanium content, refining the particle size, and optimizing the thermal cycles

  1. Reading and Not-Printing: Obstruction at the Crater Press

    Directory of Open Access Journals (Sweden)

    Richard Parker

    2014-11-01

    Full Text Available I will begin this paper with a brief and partial history of American printing, detecting a shared predilection for a noticeably maverick relation to the printed page in the works (printed and otherwise of Samuel Keimer and Benjamin Franklin during the colonial period, and the works of Walt Whitman, Emily Dickinson and Mark Twain in the nineteenth-century. I term the interrupted, dialectical printing that connects all of these writer/printers ‘not-printing’, and offer some explanation of his term and a description of some of its manifestations. I will then move on to consider how the idea of ‘not-printing’ might be helpful for the consideration of some contemporary British and American poets and printers before concluding with a description of some of the ways that the productive constraints of such a practice have influenced my own work as editor and printer at the Crater Press.

  2. Texture in equal-channel angular pressed aluminum and nickel

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, S.C.; Beyerlein, I.J.; Bourke, M.A.M.; Tome, C.N.; Rangaswamy, P. [Los Alamos National Lab., Los Alamos, NM (United States); Xu, C.; Langdon, T.G. [Univ. of Southern California, Los Angeles, CA (United States)

    2002-07-01

    Nano-structured metals with advantageous mechanical properties can be produced using severe plastic deformation techniques such as equal channel angular pressing (ECAP). Metals and alloys processed by ECAP have much higher yield strengths than the equivalent unprocessed material while retaining high ductilities, an extremely attractive combination of properties. Implicit in the process are the introduction of repetitive shear strains of 100% which introduce texture, the modeling of which is challenging. In this work, we present results from a neutron diffraction study on aluminum and nickel samples processed by ECAP. The results are compared to predictions from a visco-plastic self-consistent (VPSC) model. By taking into account grain-grain interactions in the model the agreement between the predicted and measured orientation distributions is improved. The results show also that the initial texture affects the texture evolution, at least up to strains of the order of {proportional_to}1, i.e. one ECAP pass. (orig.)

  3. Hot isostatic pressing of nanosized WC-Co hardmetals

    International Nuclear Information System (INIS)

    Azcona, I.; Ordonez, A.; Sanchez, J.M.; Castro, F.; Dominguez, L.

    2001-01-01

    A new technique based on hot isostatic pressing (HIP) has been developed to produce dense nanosized WC-Co hardmetals without the addition of grain growth inhibitors. The glass encapsulation process is the key for the effective application of isostatic pressure at temperatures well below those usually required for reaching the closed porosity state in the WC-Co system. Fully dense WC-Co samples with cobalt contents ranging from 10 to 12 wt. % have been obtained by this technique at temperatures between 1000 o C and 1200 o C with 150 MPa of applied isostatic pressure for 30 minutes. The role of isostatic pressure on the activation of densification mechanisms is discussed. (author)

  4. Cold-pressed and hot-pressed rapeseed oil: The effects of roasting and seed moisture on the antioxi- dant activity, canolol, and tocopherol level.

    Science.gov (United States)

    Siger, Aleksander; Józefiak, Marta; Górnaś, Paweł

    2017-01-01

    The paper looks at the levels of canolol, tocopherols and antioxidant activity in cold-pressed and hot-pressed rapeseed oils produced from seeds of various moisture levels (5%, 7.5%, and 10%). The paper also considers the effects of seed roasting on the levels of these compounds. The material used for the tests was rapeseed cv. Adrianna. The quality of the oils obtained is determined using peroxide and acid values. The levels of canolol and tocopherols are analyzed using HPLC. The DPPH radical-scavenging activity method for oil samples and phenolic extract from oils was used. It has been demonstrated that the oils produced from rapeseeds with a 5% moisture content, and   in particular from cold-pressed oils, were characterized by the lowest peroxide values. Cold-pressed oils produced from rapeseeds with a 5% moisture content were characterized by higher levels of tocopherols and plastochromanol-8. In the case of hot-pressed oils, the highest levels of tocopherols were found in oils pro- duced from seeds with a 7.5% moisture content, and the greatest amount of PC-8 (more than 4 mg/100 g) was found in oils produced from seeds with a 10% moisture content. Hot-pressed oils have been shown to have higher levels of these compounds than cold-pressed oils. Both roasting and hot pressing led to an increase in the amount of canolol in the oils investigated. When analysing the antioxidant activity of the oils and phenolic extracts it was shown that phenolic compounds are responsible for approx. 10% of total antioxidant activity. Various levels of biologically active compounds were shown to be present in the rapeseed oil obtained from raw materials of a varying moisture content. The type of pressing process (cold-pressing or hot-pressing) and whether the seeds have undergone roasting has also been shown to affect the resulting oil and the level of native antioxidants it contains.

  5. Fatigue effects on bar kinematics during the bench press.

    Science.gov (United States)

    Duffey, Michael J; Challis, John H

    2007-05-01

    The bench press is one of the most popular weight training exercises. Although most training regimens incorporate multiple repetition sets, there are few data describing how the kinematics of a lift change during a set to failure. To examine these changes, recreational lifters (10 men and 8 women) were recruited. The maximum weight each subject could bench press (1RM) was determined. Subjects then performed as many repetitions as possible at 75% of the 1RM load. Three-dimensional kinematic data were recorded and analyzed for all lifts. Statistical analysis revealed that differences between maximal and submaximal lifts and the kinematics of a submaximal lift change as a subject approaches failure in a set. The time to lift the bar more than doubled from the first to the last repetition, causing a decrease in both mean and peak upward velocity. Furthermore, the peak upward velocity occurred much earlier in the lift phase in these later repetitions. The path the bar followed also changed, with subjects keeping the bar more directly over the shoulder during the lift. In general, most of the kinematic variables analyzed became more similar to those of the maximal lift as the subjects progressed through the set, but there was considerable variation between subjects as to which repetition was most like the maximal lift. This study shows that there are definite changes in the lifting kinematics in recreational lifters during a set to failure and suggests it may be particularly important for coaches and less-skilled lifters to focus on developing the proper bar path, rather than reaching momentary muscular failure, in the early part of a training program.

  6. Ductile Fracture Behaviour of Hot Isostatically Pressed Inconel 690 Superalloy

    Science.gov (United States)

    Cooper, A. J.; Brayshaw, W. J.; Sherry, A. H.

    2018-04-01

    Herein we assess the differences in Charpy impact behavior between Hot Isostatically Pressed and forged Inconel 690 alloy over the temperature range of 300 °C to - 196 °C. The impact toughness of forged 690 exhibited a relatively small temperature dependence, with a maximum difference of ca. 40 J measured between 300 °C and - 196 °C, whereas the HIP'd alloy exhibited a difference of approximately double that of the forged alloy over the same temperature range. We have conducted Charpy impact testing, tensile testing, and metallographic analyses on the as-received materials as well as fractography of the failed Charpy specimens in order to understand the mechanisms that cause the observed differences in material fracture properties. The work supports a recent series of studies which assess differences in fundamental fracture behavior between Hot Isostatically Pressed and forged austenitic stainless steel materials of equivalent grades, and the results obtained in this study are compared to those of the previous stainless steel investigations to paint a more general picture of the comparisons between HIP vs forged material fracture behavior. Inconel 690 was selected in this study since previous studies were unable to completely omit the effects of strain-induced martensitic transformation at the tip of the Chary V-notch from the fracture mechanism; Inconel 690 is unable to undergo strain-induced martensitic transformation due to the alloy's high nickel content, thereby providing a sister study with the omission of any martensitic transformation effects on ductile fracture behavior.

  7. Presence of Spotters Improves Bench Press Performance: A Deception Study.

    Science.gov (United States)

    Sheridan, Andrew; Marchant, David C; Williams, Emily L; Jones, Hollie S; Hewitt, Phil A; Sparks, S Andy

    2017-10-24

    Sheridan, A, Marchant, DC, Williams, EL, Jones, HS, Hewitt, PA, and Sparks, SA. Presence of spotters improves bench press performance: a deception study. J Strength Cond Res XX(X): 000-000, 2017-Resistance exercise is a widely used method of physical training in both recreational exercise and athletic populations. The use of training partners and spotters during resistance exercise is widespread, but little is known about the effect of the presence of these individuals on exercise performance. The purpose of the current study was to investigate the effect of spotter presence on bench press performance. Twelve recreationally trained participants (age, 21.3 ± 0.8 years, height, 1.82 ± 0.1 m, and weight, 84.8 ± 11.1 kg) performed 2 trials of 3 sets to failure at 60% of 1 repetition maximum on separate occasions. The 2 trials consisted of spotters being explicitly present or hidden from view (deception). During the trials, total repetitions (reps), total weight lifted, ratings of perceived exertion (RPE), and self-efficacy were measured. Total reps and weight lifted were significantly greater with spotters (difference = 4.5 reps, t = 5.68, p < 0.001 and difference = 209.6 kg, t = 5.65, p < 0.001, respectively). Although RPE and local RPE were significantly elevated in the deception trials (difference = 0.78, f = 6.16, p = 0.030 and difference = 0.81, f = 5.89, p = 0.034, respectively), self-efficacy was significantly reduced (difference = 1.58, f = 26.90, p < 0.001). This study demonstrates that resistance exercise is improved by the presence of spotters, which is facilitated by reduced RPE and increased self-efficacy. This has important implications for athletes and clients, who should perform resistance exercise in the proximity of others, to maximize total work performed.

  8. From Dreamed Sex to Advertised Sex: Sexual Deals in Daily Press

    Directory of Open Access Journals (Sweden)

    Filomena Teixeira

    2014-04-01

    Full Text Available Media are becoming increasingly permeable to speeches that bring into play pornographization processes of the public space. The sex ads published in the daily press represent an important example of this phenomenon. By resorting to sex trade practices as positive, relaxing and pleasurable experiences, they embody a particular way of producing identities. The present study is of qualitative nature and aims to map the enunciation modes and persuasion strategies that characterize the sex ads in the daily press, thus questioning its place in the networks of meaning that make the gender. The corpus of analysis was created after a compilation of sex ads collected for a month from a national and a local Portuguese newspaper. The concept of ethos, projected by Maingueneau in his theory of discourse analysis was used as a resource. For the coding and categorization process, the software WebQDA was used. The study showed a high feminization of offers of sexual services, a predominance of imaginary scenes associated with male sex, the use of language referring to values and practices in the world of pornography and the use of stereotypes that reinforce gender inequality.

  9. Outrage Factors in Government Press Releases of Food Risk and Their Influence on News Media Coverage.

    Science.gov (United States)

    Ju, Youngkee; Lim, Jeongsub; Shim, Minsun; You, Myoungsoon

    2015-08-01

    An appropriate level of risk perception should be a critical issue in modern "risk society." There have been many studies on the influences on risk perception. This study investigates whether risk communication scholar Dr. Peter Sandman's outrage factors intensify journalistic attention to health risks from food consumption. A content analysis of a health institution's press releases was conducted to examine 15 outrage factors of food risks conveyed in the governmental risk communication. In addition, the news stories covering the food risks informed by the press releases were calculated to evaluate the relation between outrage factors of a risk and the number of news stories covering the risk. Results showed that controllability was the most salient outrage factor, followed by trust, voluntariness, familiarity, and human origin; the greater the outrage score of a risk, the more news stories of the risk. For individual outrage factors, a risk with an implication of catastrophic potential was associated with an increase of news stories. Food providers' distrustful behaviors also influenced journalistic attention to the food risks. The implication of the findings to health message designers is discussed.

  10. Flux pinning in hot isostatically pressed Bi2Sr2CaCu2Ox

    International Nuclear Information System (INIS)

    Miller, D.J.; Sengupta, S.; Hettinger, J.D.; Shi, D.; Gray, K.E.; Nash, A.S.; Goretta, K.C.

    1992-01-01

    Magnetic hysteresis data were taken from 4.2 to 35 K on Bi 2 Sr 2 CaCu 2 O x samples that were hot isostatically pressed at 105 MPa in an inert atmosphere at 825 degree C. One set of samples was pressed for only 15 min while the other was pressed for 120 min. The samples pressed for 15 min contained a high density of dislocations and planar faults, while the samples pressed for 120 min contained fewer dislocations and faults, with most dislocations present within subgrain boundaries. The samples with the complex dislocation/planar fault structures exhibited substantially larger hysteresis loops, suggesting enhanced flux pinning

  11. Prevalence of Malnutrition and Relationship with Scholastic Performance among Primary and Secondary School Children in Two Select Private Schools in Bangalore Rural District (India).

    Science.gov (United States)

    Rashmi, M R; Shweta, B M; Fathima, Farah Naaz; Agrawal, Twinkle; Shah, Moulik; Sequeira, Randell

    2015-01-01

    Malnutrition is a serious problem among children in developing countries. In India; a school meal program is in place to combat malnutrition, but only in government schools. This study is an attempt to assess the prevalence of malnutrition in primary and secondary school children in private schools and to also assess the relationship between malnutrition and academic performance. All 582 students from class 1-7 from two select schools in rural Bangalore, India were included in the study. Information on age of study subjects were collected from school records. Height and weight measurements were taken. BMI was calculated. Children were clinically examined for pallor. Data on height, weight and BMI was transformed into WHO 2007 Z scores and then was categorized as -2 SD, > 2 SD. Mathematics and English scores of the previous two class tests were taken, average scores were calculated. Statistical tests used were Chi square test, Odd's ratio, Chi square for trend. A total of 582 students participated in this study. Males were 54% (315) and females were 46% (267). One hundred and fifty-nine (27%) of the children had pallor, 81 (20%) had under nutrition, 38 (7%) had stunting, 197 (34%) had thinness and 5 (1%) were found to be obese. Positive relationship was found between weight for ageZscores and English as well as Maths; Height for age Z scores with English. Hence we conclude that the prevalence of malnutrition is high among children in private schools also; and the nutritional status of the children is strongly associated with their academic performance.

  12. Shoulder Muscle Activation of Novice and Resistance Trained Women during Variations of Dumbbell Press Exercises

    Science.gov (United States)

    Luczak, Joshua; Bosak, Andy; Riemann, Bryan L.

    2013-01-01

    Previous research has compared the effects of trunk inclination angle on muscle activation using barbells and Smith machines in men. Whether similar effects occur with the use of dumbbells or in women remains unknown. The purpose was to compare upper extremity surface electromyographical (EMG) activity between dumbbell bench, incline, and shoulder presses. Dominate arm EMG data were recorded for collegiate-aged female resistance trained individuals (n = 12) and novice female resistance trained exercisers (n = 12) from which average EMG amplitude for each repetition phase (concentric, eccentric) was computed. No significant differences were found between experienced and novice resistance trained individuals. For the upper trapezius and anterior deltoid muscles, shoulder press activation was significantly greater than incline press which in turn was significantly greater than bench press across both phases. The bench and incline presses promoted significantly greater pectoralis major sternal activation compared to the shoulder press (both phases). While pectoralis major clavicular activation during the incline press eccentric phase was significantly greater than both the bench and shoulder presses, activation during the bench press concentric phase promoted significantly greater activation than the incline press which in turn was significantly greater than the shoulder press. These results provide evidence for selecting exercises in resistance and rehabilitation programs. PMID:26464884

  13. Shoulder Muscle Activation of Novice and Resistance Trained Women during Variations of Dumbbell Press Exercises

    Directory of Open Access Journals (Sweden)

    Joshua Luczak

    2013-01-01

    Full Text Available Previous research has compared the effects of trunk inclination angle on muscle activation using barbells and Smith machines in men. Whether similar effects occur with the use of dumbbells or in women remains unknown. The purpose was to compare upper extremity surface electromyographical (EMG activity between dumbbell bench, incline, and shoulder presses. Dominate arm EMG data were recorded for collegiate-aged female resistance trained individuals ( and novice female resistance trained exercisers ( from which average EMG amplitude for each repetition phase (concentric, eccentric was computed. No significant differences were found between experienced and novice resistance trained individuals. For the upper trapezius and anterior deltoid muscles, shoulder press activation was significantly greater than incline press which in turn was significantly greater than bench press across both phases. The bench and incline presses promoted significantly greater pectoralis major sternal activation compared to the shoulder press (both phases. While pectoralis major clavicular activation during the incline press eccentric phase was significantly greater than both the bench and shoulder presses, activation during the bench press concentric phase promoted significantly greater activation than the incline press which in turn was significantly greater than the shoulder press. These results provide evidence for selecting exercises in resistance and rehabilitation programs.

  14. The Mediated Amplification of a Crisis: Communicating the A/H1N1 Pandemic in Press Releases and Press Coverage in Europe.

    Science.gov (United States)

    Rossmann, Constanze; Meyer, Lisa; Schulz, Peter J

    2018-02-01

    In the aftermath of the A/H1N1 pandemic, health authorities were criticized for failures in crisis communication efforts, and the media were accused of amplifying the pandemic. Considering these criticisms, A/H1N1 provides a suitable case for examining risk amplification processes that may occur in the transfer of information from press releases to print news media during a health crisis. We integrated the social amplification of risk framework with theories of news decisions (news values, framing) in an attempt to contribute to existing research both theoretically and empirically. We conducted a quantitative content analysis of press releases disseminated by health and governmental authorities, as well as the quality and tabloid press in 10 European countries between March 2009 and March 2011. Altogether 243 press releases, 1,243 quality press articles, and 834 tabloid press articles were coded. Consistent with research on news values and framing the results suggest that quality and tabloid papers alike amplified A/H1N1 risks by emphasizing conflict and damage, presenting information in a more dramatized way, and using risk-amplifying frames to a greater extent and risk-attenuating frames to a lesser extent than press releases. To some extent, the quality and tabloid press differed in how risk information was presented. While tabloid press articles seemed to follow the leading quality press with regards to content and framing of health crisis coverage, they exhibited a stronger emphasis on drama and emotion in the way they presented information. © 2017 Society for Risk Analysis.

  15. A new analgesic method, two-minute sciatic nerve press, for immediate pain relief: a randomized trial

    Directory of Open Access Journals (Sweden)

    Zhang Fenglin

    2008-01-01

    Full Text Available Abstract Background Current analgesics have drawbacks such as delays in acquisition, lag-times for effect, and side effects. We recently presented a preliminary report of a new analgesic method involving a two-minute sciatic nerve press, which resulted in immediate short-term relief of pain associated with dental and renal diseases. The present study investigated whether this technique was effective for pain associated with other disease types, and whether the relief was effective for up to one hour. Methods This randomized, placebo-controlled, parallel-group trial was conducted in four hospitals in Anhui Province, China. Patients with pain were sequentially recruited by participating physicians during clinic visits, and 135 patients aged 15 – 80 years were enrolled. Dental disease patients included those with acute pulpitis and periapical abscesses. Renal disease patients included those with kidney infections and/or stones. Tumor patients included those with nose, breast, stomach and liver cancers, while Emergency Room patients had various pathologies. Patients were randomly assigned to receive a "sciatic nerve press" in which pressure was applied simultaneously to the sciatic nerves at the back of both thighs, or a "placebo press" in which pressure was applied to a parallel region on the front of the thighs. Each fist applied a pressure of 11 – 20 kg for 2 minutes. Patients rated their level of pain before and after the procedure. Results The "sciatic nerve press" produced immediate relief of pain in all patient groups. Emergency patients reported a 43.5% reduction in pain (p th minutes, and the relief decreased 47% by the 60th minutes. Conclusion Two minutes of pressure on both sciatic nerves produced immediate significant short-term conduction analgesia. This technique is a convenient, safe and powerful method for the short-term treatment of clinical pain associated with a diverse range of pathologies. Trial registration Current

  16. Implementing Strategies for Drying and Pressing Wood Without Emissions Controls

    Energy Technology Data Exchange (ETDEWEB)

    Sujit Banerjee; Terrance Conners

    2007-09-07

    Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal

  17. Effective media communication of disasters: Pressing problems and recommendations

    Directory of Open Access Journals (Sweden)

    Ginter Peter M

    2007-06-01

    Full Text Available Abstract Background Public health officials and journalists play a crucial role in disseminating information regarding natural disasters, terrorism and other human-initiated disasters. However, research suggests that journalists are unprepared to cover terrorism and many types of natural disasters, in part because of lack sufficient expertise in science and medicine and training. The objective of this research was to identify solutions to problems facing journalists and public health public information officer (PIOs of communicating with the public during natural and human-initiated disasters. Methods To assist in identifying the most pressing problems regarding media response to health-related risks such as terrorism and large-scale natural disasters, 26 expert advisors were convened, including leaders representing journalists and public information officers, state health officials, experts in terrorism and emergency preparedness, and experts in health, risk, and science communication. The advisory group participated in pre-arranged interviews and were asked to identify and review bioterrorism educational resources provided to journalist. All advisory group members were then invited to attend a day long meeting January 29, 2004 to review the findings and reach consensus. Results The most pressing problems were found to be a lack of coordination between PIO's and journalists, lack of resources for appropriately evaluating information and disseminating it efficiently, and a difference in perception of PIO's and journalist towards each others role during emergency situations. The advisory board developed a list of 15 recommendations that may enhance communication plans betweens PIO's, journalist and the public. The solutions were meant to be feasible in terms of costs and practical in terms of the professional and organizational realities in which journalists and PIO's work. Conclusion It is clear that PIO's and journalists play crucial roles in

  18. Preparation and Mechanical Properties of Pressed Straw Concrete Brick

    Science.gov (United States)

    Sumarni, S.; Wijanarko, W.

    2018-03-01

    Rice straws have been widely used as wall filler material in China, Australia, and United States, by spinning them into hays with an approximate dimension of 40 cm of height, 40cm of thickness and 60 cm of width, using a machine. Then, the hays are placed into a wall frame until they fill it completely. After that, the wall frame is covered with wire mesh and plastered. In this research, rice straws are to be used as concrete brick fillers, by pressing the straws into hays and then putting them into the concrete brick mold along with mortar. The objective of this research is to investigate the mechanical properties of concrete brick, namely: compressive strength, specific gravity, and water absorption power. This research used experimental research method. It was conducted by using concrete bricks which had 400 cm of width, 200 cm of height, and 100 cm of thickness, made from rice straws, cement, sand, and water as the test sample. The straws were each made different by their volume. The mortars used in this research were made from cement, sand, and water, with the ratio of 1:7:0.5. The concrete bricks were made by pressing straws mixed with glue into hays, and then cut by determined variations of volume. The variations of hays volume were 0 m3, 0.000625 m3, 0.00075 m3, 0.000875 m3, 0.00125 m3, 0.0015 m3, 0.00175 m3, 0.001875 m3, 0.00225 m3, and 0.002625 m3. There were 3 samples for each volumes of hays. The result shows that the straw concrete bricks reached the maximum compressive strength of 1.92 MPa, specific gravity of 1,702 kg/m3, and water absorption level of 3.9 %. Based on the provided measurements of products in the Standar Nasional Indonesia (Indonesian product standardization), the concrete bricks produced attained the prescribed standard quality.

  19. "Mended or ended?" Football injuries and the British and American medical press, 1870-1910.

    Science.gov (United States)

    Park, R J

    2001-01-01

    'Playing Hurt/Playing Tough', a dominant ideology in today's football (soccer, rugby, American 'gridiron'), is by no means new. Many books, monographs, and articles have examined the historical development of these games, but the attention given to them in the medical press during the late 1800s/early 1900s has been overlooked. The Lancet, Journal of the American Medical Association, and other turn-of-the-century medical publications regularly included accounts and descriptions of injuries and deaths. More telling were the many editorials in which physicians in both Britain and the United States expressed enthusiasm while also lamenting the games' physical and morale effects upon players, asking whether 'football' should be mended or ended.

  20. The image of the romanian immigrants in the international press: myth or reality?

    Directory of Open Access Journals (Sweden)

    Cătălina-Felicia Comăneci

    2011-12-01

    Full Text Available This article purports to analyse the migration phenomenon from an imagological perspective, focusing on the way Romanian immigrants are portrayed in the international press. Although stereotypes are as old as time, they can be harmful in this contemporary age, when spaces and borders have been largely abolished, with negative impact not only on the Romanians living abroad, but also on the ones left in the country, who are unfairly associated with delinquents. The extent of this discrimination wave promoted by both the international and national mass media is alarming and it is important to make a clear distinction between those Romanian intellectuals working abroad and the illegal immigrants of Romanian origin committing crimes abroad.

  1. Press forging and optical properties of lithium fluoride

    Science.gov (United States)

    Ready, J. F.; Vora, H.

    1980-07-01

    Lithium fluoride is an important candidate material for windows on high power, short-pulse ultraviolet and visible lasers. Lithium fluoride crystals were press forged in one step over the temperature range 300 to 600 C to obtain fine grained polycrystalline material with improved mechanical properties. The deformation that can be given to a lithium fluoride crystal during forging is limited by the formation of internal cloudiness (veiling) with the deformation limit increasing with increasing forging temperature from about 40 percent at 400 C to 65 percent at 600 C. To suppress veiling, lithium fluoride crystals were forged in two steps over the temperature range 300 to 600 C, to total deformations of 69 to 76 percent, with intermediate annealing at 700 C. This technique yields a material which has lower scattering with more homogeneous microstructure than that obtained in one step forging. The results of characterization of various optical and mechanical properties of single crystal and forged lithium fluoride, including scattering, optical homogeneity, residual absorption, damage thresholds, environmental stability, and thresholds for microyield are described.

  2. Press forging and optical properties of lithium fluoride

    International Nuclear Information System (INIS)

    Ready, J.F.; Vora, H.

    1979-01-01

    Lithium fluoride is an important candidate material for windows on high-power, short-pulse ultraviolet and visible lasers. Lithium fluoride crystals have been press forged in one step over the temperature range 300 to 600 0 c to obtain fine-grained polycrystalline material with improved mechanical properties. The deformation that can be given to a lithium fluoride crystal during forging is limited by the formation of internal cloudiness (veiling) with the deformation limit increasing with increasing forging temperature from about 40% at 400 0 C to 65% at 600 0 C. To suppress veiling, lithium fluoride crystals were forged in two steps over the temperature range 300 to 600 0 C, to total deformations of 69-76%, with intermediate annealing at 700 0 C. This technique yields a material which has lower scattering with more homogeneous microstructure than that obtained in one-step forging. The results of characterization of various optical and mechanical properties of single-crystal and forged lithium fluoride, including scattering, optical homogeneity, residual absorption, damage thresholds, environmental stability, and thresholds for microyield are described

  3. Biogas production from Jatropha curcas press-cake.

    Science.gov (United States)

    Staubmann, R; Foidl, G; Foidl, N; Gübitz, G M; Lafferty, R M; Arbizu, V M; Steiner, W

    1997-01-01

    Seeds of the tropical plant Jatropha curcas (purge nut, physic nut) are used for the production of oil. Several methods for oil extraction have been developed. In all processes, about 50% of the weight of the seeds remain as a press cake containing mainly protein and carbohydrates. Investigations have shown that this residue contains toxic compounds and cannot be used as animal feed without further processing. Preliminary experiments have shown that the residue is a good substrate for biogas production. Biogas formation was studied using a semicontinous upflow anaerobic sludge blanket (UASB) reactor; a contact-process and an anaerobic filter each reactor having a total volume of 110 L. A maximum production rate of 3.5 m3 m"3 d"1 was obtained in the anaerobic filter with a loading rate of 13 kg COD m~3 d"1. However, the UASB reactor and the contact-process were not suitable for using this substrate. When using an anaerobic filter with Jatropha curcas seed cake as a substrate, 76% of the COD was degraded and 1 kg degraded COD yielded 355 L of biogas containing 70% methane.

  4. Biogas production from Jatropha curcas press-cake

    Energy Technology Data Exchange (ETDEWEB)

    Staubmann, R.; Guebitz, G.M.; Lafferty, R.M. [Graz Technical Univ. (Austria)] [and others

    1997-12-31

    Seeds of the tropical plant Jatropha curcas (purge nut, physic nut) are used for the production of oil. Several methods for oil extraction have been developed. In all processes, about 50% of the weight of the seeds remain as a press cake containing mainly protein and carbohydrates. Investigations have shown that this residue contains toxic compounds and cannot be used as animal feed without further processing. Preliminary experiments have shown that the residue is a good substrate for biogas production. Biogas formation was studied using a semicontinous upflow anaerobic sludge blanket (UASB) reactor; a contact-process and an anaerobic filter each reactor having a total volume of 110 L. A maximum production rate of 3.5 m{sup 3} m{sup -3} d{sup -1} was obtained in the anaerobic filter with a loading rate of 13 kg COD m{sup -3} d{sup -1}. However, the UAS reactor and the contact-process were not suitable for using this substrate. When using an anaerobic filter with Jatropha curcas seed cake as a substrate, 76% of the COD was degraded and 1 kg degraded COD yielded 355 L of biogas containing 70% methane. 28 refs., 3 figs., 4 tabs.

  5. The nuclear controversy as reflected in the daily press

    International Nuclear Information System (INIS)

    Buiren, S. van.

    1980-01-01

    Based on a content analysis of 2047 journal articles of the years 1974 to 1977 on conflicts over nuclear power plants (Wyhl, Brokdorf), the book intends to analyze the role of the media in present social conflicts. The book presents facts and figures concerning the information and opinions on nuclear power in five newspapers and the bias of these newspapers in favour of nuclear power or against it. According to the author, newspaper journalists have failed at least in one thing: to explain the dimensions of the conflict with regard to social policy and to give background information on their own opinions. On the other hand, the press has proved its independence: It is not an extended arm of industrial PR departments - at least not in the nuclear controversy. The greater part of the articles is in opposition to nuclear power. The development and modifications of the arguments stated by the various groups active in the nuclear controversy are analyzed in dependence of the increasingly aggressive nature of the conflict. (HP) [de

  6. Process and equipment development for hot isostatic pressing treatability study

    Energy Technology Data Exchange (ETDEWEB)

    Bateman, Ken; Wahlquist, Dennis; Malewitz, Tim

    2015-03-01

    Battelle Energy Alliance (BEA), LLC, has developed processes and equipment for a pilot-scale hot isostatic pressing (HIP) treatability study to stabilize and volume reduce radioactive calcine stored at Idaho National Laboratory (INL). In 2009, the U. S. Department of Energy signed a Record of Decision with the state of Idaho selecting HIP technology as the method to treat 5,800 yd^3 (4,400 m^3) of granular zirconia and alumina calcine produced between 1953 and 1992 as a waste byproduct of spent nuclear fuel reprocessing. Since the 1990s, a variety of radioactive and hazardous waste forms have been remotely treated using HIP within INL hot cells. To execute the remote process at INL, waste is loaded into a stainless-steel or aluminum can, which is evacuated, sealed, and placed into a HIP furnace. The HIP simultaneously heats and pressurizes the waste, reducing its volume and increasing its durability. Two 1 gal cans of calcine waste currently stored in a shielded cask were identified as candidate materials for a treatability study involving the HIP process. Equipment and materials for cask-handling and calcine transfer into INL hot cells, as well as remotely operated equipment for waste can opening, particle sizing, material blending, and HIP can loading have been designed and successfully tested. These results demonstrate BEA’s readiness for treatment of INL calcine.

  7. MASCULINITY REPRESENTATION IN THE INTERWAR LITHUANIAN PRESS ADVERTISING

    Directory of Open Access Journals (Sweden)

    Gabija Bankauskaitė-Sereikienė

    2016-10-01

    Full Text Available The analysis of this article focuses on normative interwar masculinity images. As advertising is an integral part of modern society revealing its face, the analysis is based on press advertisements collected from interwar magazines. Hegemonic features such as: a super man, a successful careerist, the man of a family, a hedonistic and narcissistic man were analysed. The analysis is focused on verbal and non-verbal expressions. The results have shown that the image of a super man was mostly related to the body and its size, ability to do a hard work. Main details – classic suit and luxury attribute such as a car usually represented a good social status and described a man as a successful careerist. It was noted that during the interwar period hegemonic masculinity was expressed by self-confidence. It was represented by a hedonistic, level-headed man images. The construct of the patriarch of the family started to be criticized during the interwar period and was slowly replaced by a new image of a careful man and husband.

  8. Chemical Composition of Iran's Pistacia atlantica Cold-Pressed Oil

    Directory of Open Access Journals (Sweden)

    M. Saber-Tehrani

    2013-01-01

    Full Text Available The lipid fraction of Pistacia atlantica seeds was extracted for the first time by means of cold-press technique and analyzed for its chemical composition. The fatty acids, sterols, triacylglycerols (TAG, tocopherols, polyphenols, and pigments were identified and their concentrations were determined by means of reversed-phase high-performance liquid chromatography (RP-HPLC and gas chromatography (GC. Because of its high content of unsaturated fatty acids, it might prove to be of value in diets and it may be used as edible cooking or salad oils or for margarine manufacture. Pistacia atlantica seed oil has the unique sterols and tocopherols content providing source of natural antioxidants. The main triacylglycerols were SLL + PLO, SOL + POO, OOLn + PLL, OOO, and SOO. This paper examined the phenolic fraction of Pistacia atlantica seed oil. Moreover, caffeic acid followed by cinnamic acid, pinoresinol, vanillin, p-Coumaric acid, ferulic acid, and o-Coumaric acid was also determined. This paper presents the first investigation of chlorophyll's and carotene's composition in Pistacia atlantica seed oil. Furthermore, pheophytin a was the major component, followed by luteoxanthin, neoxanthin, violaxanthin, lutein, lutein isomers, chlorophyll a, chlorophyll a′, and pheophytin a′ were also determined.

  9. Pronouns as Means of Impersonal Presentation in English Quality Press

    Directory of Open Access Journals (Sweden)

    Pavel Skorupa

    2017-05-01

    Full Text Available The current paper presents the analysis of pronouns as means of impersonal presentation in English quality press. The article gives the definition of the pronoun as a grammatical category and describes the use and purpose of impersonalization strategies. The data for the investigation was taken from the international English quality newspapers: The Financial Times (UK and The Wall Street Journal (US, which are the leading daily broadsheet newspapers in the UK and the USA having millions of both print and online subscribers worldwide. The articles on political, economic, and social issues were chosen on a random basis and scrutinized for pronouns as means of impersonal presentation of fact. The body of 187 cases of impersonalization chosen for the analysis were divided into groups with focus on the grammatical category they belong to. The most and least often used classes of pronouns were identified and compared. The results of the current study may be useful for editors, journalists, writers, as well as for further study of impersonalization strategies in the English language.

  10. The "sticking period" in a maximum bench press.

    Science.gov (United States)

    van den Tillaar, Roland; Ettema, Gertjan

    2010-03-01

    The purpose of this study was to examine muscle activity and three-dimensional kinematics in the ascending phase of a successful one-repetition maximum attempt in bench press for 12 recreational weight-training athletes, with special attention to the sticking period. The sticking period was defined as the first period of deceleration of the upward movement (i.e. from the highest barbell velocity until the first local lowest barbell velocity). All participants showed a sticking period during the upward movement that started about 0.2 s after the initial upward movement, and lasted about 0.9 s. Electromyography revealed that the muscle activity of the prime movers changed significantly from the pre-sticking to the sticking and post-sticking periods. A possible mechanism for the existence of the sticking period is the diminishing potentiation of the contractile elements during the upward movement together with the limited activity of the pectoral and deltoid muscles during this period.

  11. Reconstructing apology: David Cameron's Bloody Sunday apology in the press.

    Science.gov (United States)

    McNeill, Andrew; Lyons, Evanthia; Pehrson, Samuel

    2014-12-01

    While there is an acknowledgement in apology research that political apologies are highly mediated, the process of mediation itself has lacked scrutiny. This article suggests that the idea of reconstruction helps to understand how apologies are mediated and evaluated. David Cameron's apology for Bloody Sunday is examined to see how he constructs four aspects of apology: social actors, consequences, categorization, and reasons. The reconstruction of those aspects by British, Unionist, and Nationalist press along with reconstructions made by soldiers in an online forum are considered. Data analysis was informed by thematic analysis and discourse analysis which helped to explore key aspects of reconstruction and how elements of Cameron's apology are altered in subsequent mediated forms of the apology. These mediated reconstructions of the apology allowed their authors to evaluate the apology in different ways. Thus, in this article, it is suggested that the evaluation of the apology by different groups is preceded by a reconstruction of it in accordance with rhetorical goals. This illuminates the process of mediation and helps to understand divergent responses to political apologies. © 2013 The British Psychological Society.

  12. Activity-Based Costing in the After Press Services Industry

    Science.gov (United States)

    Shevasuthisilp, Suntichai; Punsathitwong, Kosum

    2009-10-01

    This research was conducted to apply activity-based costing (ABC) in an after press service company in Chiang Mai province, Thailand. The company produces all of its products by one-stop service (such as coating, stitching, binding, die cutting, and gluing). All products are made to order, and have different sizes and patterns. A strategy of low price is used to compete in the marketplace. After cost analysis, the study found that the company has high overhead (36.5% of total cost). The company's problem is its use of traditional cost accounting, which has low accuracy in assigning overhead costs. If management uses this information when pricing customer orders, losses may occur because real production costs may be higher than the selling price. Therefore, the application of ABC in cost analysis can help executives receive accurate cost information; establish a sound pricing strategy; and improve the manufacturing process by determining work activities which have excessively high production costs. According to this research, 6 out of 56 items had a production cost higher than the selling price, leading to losses of 123,923 baht per year. Methods used to solve this problem were: reducing production costs; establishing suitable prices; and creating a sales promotion with lower prices for customers whose orders include processes involving unused capacity. These actions will increase overall sales of the company, and allow more efficient use of its machinery.

  13. Addressing Pressing Needs in the Development of Advanced Therapies.

    Science.gov (United States)

    Morrow, David; Ussi, Anton; Migliaccio, Giovanni

    2017-01-01

    The commercial development of advanced therapy medicinal products (ATMPs) represents great opportunity for therapeutic innovation but is beset by many challenges for its developers. Although the ATMP field continues to progress at a rapid pace, evidenced by the increasing number of clinical trials conducted over the past few years, several factors continue to complicate the introduction of ATMPs as a curative treatment for multiple disease types, by blocking their translational pathway from research to the patient. While several recent publications (Trounson and McDonald, 2015; Abou-El-Enein et al., 2016a,b) as well as an Innovative Medicines Initiative consultation (IMI, 2016) this year have highlighted the major gaps in ATMP development, with manufacturing, regulatory, and reimbursement issues at the forefront, there remains to be formulated a coherent strategy to address these by bringing the relevant stakeholders to a single forum, whose task it would be to design and execute a delta plan to alleviate the most pressing bottlenecks. This article focuses on two of the most urgent areas in need of attention in ATMP development, namely manufacturing and reimbursement, and promotes the concept of innovation-dedicated research infrastructures to support a multi-sector approach for ensuring the successful development, entry, and ensuing survival of ATMPs in the healthcare market.

  14. Addressing Pressing Needs in the Development of Advanced Therapies

    Directory of Open Access Journals (Sweden)

    David Morrow

    2017-09-01

    Full Text Available The commercial development of advanced therapy medicinal products (ATMPs represents great opportunity for therapeutic innovation but is beset by many challenges for its developers. Although the ATMP field continues to progress at a rapid pace, evidenced by the increasing number of clinical trials conducted over the past few years, several factors continue to complicate the introduction of ATMPs as a curative treatment for multiple disease types, by blocking their translational pathway from research to the patient. While several recent publications (Trounson and McDonald, 2015; Abou-El-Enein et al., 2016a,b as well as an Innovative Medicines Initiative consultation (IMI, 2016 this year have highlighted the major gaps in ATMP development, with manufacturing, regulatory, and reimbursement issues at the forefront, there remains to be formulated a coherent strategy to address these by bringing the relevant stakeholders to a single forum, whose task it would be to design and execute a delta plan to alleviate the most pressing bottlenecks. This article focuses on two of the most urgent areas in need of attention in ATMP development, namely manufacturing and reimbursement, and promotes the concept of innovation-dedicated research infrastructures to support a multi-sector approach for ensuring the successful development, entry, and ensuing survival of ATMPs in the healthcare market.

  15. A hybrid press system: Motion design and inverse kinematics issues

    Directory of Open Access Journals (Sweden)

    M. Erkan Kütük

    2016-06-01

    Full Text Available A hybrid machine (HM is a system integrating two types of motor; servo and constant velocity with a mechanism. The purpose is to make use of the energy in the system efficiently with a flexible system having more than one degree of freedom (DOF. A review is included on hybrid press systems. This study is included as a part of an industrial project used for metal forming. The system given here includes a 7 link mechanism, one of link is driven by a constant velocity motor (CV and the other is driven by a servo motor (SM. Kinematics analysis of the hybrid driven mechanism is presented here as inverse kinematics analysis. Motion design is very crucial step when using a hybrid machine. So motion design procedure is given with motion curve examples needed. Curve Fitting Toolbox (CFT in Matlab® is offered as an auxiliary method which can be successfully applied. Motion characteristics are chosen by looking at requirements taken from metal forming industry. Results are then presented herein.

  16. Effect of different pushing speeds on bench press.

    Science.gov (United States)

    Padulo, J; Mignogna, P; Mignardi, S; Tonni, F; D'Ottavio, S

    2012-05-01

    The purpose of this study was to investigate the effect on muscular strength after a 3-week training with the bench-press at a fixed pushing of 80-100% maximal speed (FPS) and self-selected pushing speed (SPS). 20 resistance-trained subjects were divided at random in 2 groups differing only regarding the pushing speed: in the FPS group (n=10) it was equal to 80-100% of the maximal speed while in the SPS group (n=10) the pushing speed was self-selected. Both groups were trained twice a week for 3 weeks with a load equal to 85% of 1RM and monitored with the encoder. Before and after the training we measured pushing speed and maximum load. Significant differences between and within the 2 groups were pointed out using a 2-way ANOVA for repeated measures. After 3 weeks a significant improvement was shown especially in the FPS group: the maximum load improved by 10.20% and the maximal speed by 2.22%, while in the SPS group the effect was <1%. This study shows that a high velocity training is required to increase the muscle strength further in subjects with a long training experience and this is possible by measuring the individual performance speed for each load. © Georg Thieme Verlag KG Stuttgart · New York.

  17. A study of pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing on properties of aluminium/alumina nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Abedinzadeh, Reza; Safavi, Seyed Mohsen; Karimzadeh, Fathallah [Isfahan University, Isfahan (Iran, Islamic Republic of)

    2016-05-15

    Bulk Al/4wt-%Al{sub 2}O{sub 3} nanocomposites were prepared by consolidating nanocomposite powders using pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing techniques. Microstructural observations revealed that the microwave-assisted hot press sintering at different sintering temperatures of 400.deg.C and 500.deg.C resulted in more densification and smaller grain size for Al/Al{sub 2}O{sub 3} nanocomposite as compared with the conventional hot pressing. Moreover, the application of pressure in microwave sintering process led to more densification and grain growth. Mechanical properties resulting from microhardness and nanoindentation tests were also compared between three-method processed samples. It was found that the microwave-assisted hot-pressed sample exhibited higher hardness and elastic modulus in comparison with microwave-sintered and conventional hot-pressed samples. The improvement in the mechanical properties can be ascribed to lower porosity of microwave-assisted hot-pressed sample.

  18. 46 CFR 310.55 - Scholastic requirements.

    Science.gov (United States)

    2010-10-01

    ... Mathematics (from algebra, geometry and trigonometry); (B) 3 units of English; and (C) 1 unit of Physics or... science; (B) Foreign language; (C) Economics; and, (D) Social science. (2) Evidence of academic work...

  19. DOES COMMUNITY PARTICIPATION SET THE LOCAL PRESS AGENDA? A VIEW ON DELIBERATIVE AND CIVIC PRACTICES IN THE PORTUGUESE PRESS

    Directory of Open Access Journals (Sweden)

    Gil Baptista Ferreira

    2013-12-01

    Full Text Available What are journalists’ perceptions of the citizen’s role in democratic life? What is the role that journalists attribute to the public in the construction of the news agenda? The main goal of this study is to investigate the relationship between the local press, citizens and civic practices. It takes as starting point a dual theoretical approach, the theory of deliberative democracy and the public journalism movement, to assess the scope of the concept of “deliberative journalism.” Under the aegis of the project “Citizens’ Agenda: journalism and political participation in the Portuguese media”, questionnaires were delivered to 45 journalists from the main regional newspapers in Portugal. Focusing on the importance of the citizen’s agenda for the journalists’ decision making process, the results show that although the journalists appreciate the principles underlying the public and deliberative journalism movements (which suggests that a deliberative consciousness is emerging, they also express the permanency of a conventional journalism approach.

  20. Does community participation set the local press agenda? A view on deliberative and civic practices in the Portuguese press

    Directory of Open Access Journals (Sweden)

    Gil Baptista Ferreira

    2013-12-01

    Full Text Available What are journalists’ perceptions of the citizen’s role in democratic life? What is the role that journalists attribute to the public in the construction of the news agenda? The main goal of this study is to investigate the relationship between the local press, citizens and civic practices. It takes as starting point a dual theoretical approach, the theory of deliberative democracy and the public journalism movement, to assess the scope of the concept of “deliberative journalism.” Under the aegis of the project “Citizens’ Agenda: journalism and political participation in the Portuguese media”, questionnaires were delivered to 45 journalists from the main regional newspapers in Portugal. Focusing on the importance of the citizen’s agenda for the journalists’ decision making process, the results show that although the journalists appreciate the principles underlying the public and deliberative journalism movements (which suggests that a deliberative consciousness is emerging, they also express the permanency of a conventional journalism approach.

  1. Investigating the effect of aeration powder filling on the actual compacting press; Eareto jutenho no jikki press deno hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, M. [Toyota Central Research and Development Labs., Inc., Nagoya (Japan); Urata, I. [Toyota Motor Co. Ltd., Aichi (Japan)

    1998-05-15

    The authors proposed an aeration filling method as a new filling method in order to obtain uniform and high speed filling by carrying out basic experiments on powder material filling using a visual apparatus. In this study, the aeration powder filling was applied to the product compacting on the actual compacting press, and its evaluation was carried out. As a result, the following effects were confirmed. The weight scattering was reduced to about 70% in the high speed filling and about 50% in the low speed filling. The maximum density was reduced to about 30% in the high speed filling and about 25% in the low speed filling. The maximum thickness difference was reduced to 65% in the high speed filling and about 20% in the low speed filling. The aeration powder effect was stronger in the high speed filling than that in the low speed filling. The weight and size accuracy of the components were increased by the aeration powder filling. The pause and the shaking operation were discarded in the front part of the powder box, thus the filling time could be remarkable shortened. 3 refs., 6 figs.

  2. Hot pressing of B{sub 4}C/SiC composites

    Energy Technology Data Exchange (ETDEWEB)

    Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O. [Ystanbul Technical University, Faculty of Chemistry and Metallurgy, Materials and Metallurgical Engineering Dept., Maslak-Ystanbul (Turkey)

    2005-07-01

    B{sub 4}C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B{sub 4}C/SiC composite samples were lower than monolithic B{sub 4}C in all experimental conditions. (authors)

  3. Effect of friction stirring on microstructure in equal channel angular pressed aluminum alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Y.S.; Urata, M.; Kokawa, H.; Ikeda, K. [Dept. of Materials Processing, Graduate School of Engineering, Tohoku Univ., Aoba-yama, Sendai (Japan)

    2003-07-01

    Friction stir welding (FSW) was applied to equal channel angular (ECA) pressed aluminum (Al) alloys with high strength and toughness, and the effect of FSW on microstructure and the hardness profile in ECA-pressed alloys was examined. In the weld of ECA-pressed Al alloy 1050 and 5083, the stir zone had roughly the same hardness as the ECA-pressed material, while the hardness was slightly reduced in the thermo-mechanically affected zone (TMAZ). The reduction of hardness in the TMAZ was due to dynamic recovery of dislocation cells of the ECA-pressed material. The addition of Zr to Al suppressed the reduction of hardness in the TMAZ. Consequently, friction stir (FS) weld of Al-Zr alloy retained the hardness of the ECA-pressed material throughout the weld. (orig.)

  4. Optimizing of SPS pressed SrFe12O19 pellets from nano-powder

    DEFF Research Database (Denmark)

    Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens

    2015-01-01

    direction giving a higher net magnetization. One challenge is to optimize the pressing conditions in order to maximize the remanence and thus the energy product. In present work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle...... size. The powder was pressed using Spark Plasma Syntering (SPS) system at different conditions in order to investigate how the pressing conditions influence the magnetic properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature....... Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using Vibrating Sample Magnetometer. By applying an external magnetic field before pressing, the alignment is heightened...

  5. Brine migration in hot-pressed polycrystalline sodium chloride

    International Nuclear Information System (INIS)

    Biggers, J.V.; Dayton, G.O.

    1982-12-01

    This report describes experiments designed to provide data on brine migration in polycrystalline salt. Polycrystalling samples of various grain sizes, density, and purity were prepared from several commercial-grade salts by hot-pressing. Three distinct experimental set-ups were used to place salt billets in an induced thermal gradient in contact with brine source. The test designs varied primarily in the way in which the thermal gradient was applied and monitored and the way in which brine migration was determined. All migration was in enclosed vessels which precluded visual observation of brine movement through the microstructure. Migration velocities were estimated either by the timed appearance of brine at the hot face of the sample, or by determination of the penetration distance of migration artifacts in the microstructure after tests of fixed duration. For various reasons both of these methods were subject to a large degree of error. Our results suggest, however, that the migration velocity in dense polycrystalline salt may be at least an order of magnitude greater than that suggested by single-crystal experiments. Microstructural analysis shows that brine prefers to migrate along paths of high crystalline activity such as grain and subgrain boundaries and is dispersed rather quickly in the microstructure. A series of tests were performed using various types of tracers in brine in order to flag migration paths and locate brine in the microstructure more decisively. These attempts failed and it appears that only the aqueous portion of the brine moves through the microstructure with the dissolved ions being lost and replaced rather quickly. This suggests the use of deuterium as a tracer in future work

  6. First wall and shield components manufacturing by hot isostatic pressing

    International Nuclear Information System (INIS)

    Lind, Anders; Tegman, R.

    1994-01-01

    At a meeting in Garching in June 1994 Hot Isostatic Pressing (HIP) was presented as a possible route to manufacture ITER first wall and shield components. The main advantages of the HIP concept include excellent and uniform mechanical properties of the produced materials and joints, high reliability and robustness of the HIP process, double containment of coolant, good flexibility concerning general design as well as size and location for inner cooling tubes, low cost and short delivery times, and a good near net shape capability for components in size up to 15 tons. To assess the applicability of HIP for the manufacturing of ITER first wall and shield components, it was agreed * to choose possible production parameters based in the present know-how, * to produce a compound mock-up in one shot from available solid steel/powder copper/steel tubes to demonstrate the joinability of the materials, * to examine the produced mock-up/materials by multi array ultrasonic testing, limited mechanical testing, metallography, scanning electron microscopy and energy dispersive spectroscopy, and * to compile data on Type 316L steels produced by HIP. Preliminary results and the mock-up were presented at a meeting in Garching in mid July 1994. This study clearly shows the excellent joinability of a copper alloy (Cu-0.5%Zr) and stainless steels (Type 304, 316 L) by HIP at temperatures close to the melting temperature of copper, with only limited influence on the microstructures, which makes it possible to HIP the first wall and shield structure in one step. Excellent mechanical properties of the compound are obtained with the copper alloy and not the joint being the weakest part. 7 refs, 21 figs, 1 tab

  7. Pyrolysis and thermal oxidation kinetics of sugar mill press mud

    International Nuclear Information System (INIS)

    Gangavati, P.B.; Safi, M.J.; Singh, A.; Prasad, B.; Mishra, I.M.

    2005-01-01

    Press mud, a solid waste obtained from the sugar mills, has the potential of energy generation through pyrolysis and gasification. The paper reports its proximate and ultimate analyses, deformation and fusion ash temperatures, lower and higher heating values, physico-chemical and thermal degradation in nitrogen and air atmospheres. The thermal degradation was conducted in a thermogravimetric analyzer from room temperature to 900 deg C at heating rates of 20 and 40 K min -1 . The thermogravimetric, derivative thermogravimetric and differential thermal analyses were carried out to determine the rate of volatiles evolution, the effect of heating rates on the thermal degradation characteristics and to determine the global mass loss kinetics of thermal degradation. The thermal degradation was found to occur in several distinct phases: each phase giving volatile evolution in an independent parallel lump. Each decomposition phase was modeled by a single irreversible reaction with respect to the solid mass. Global mass loss kinetics was also determined for the entire decomposition process, as if occurring in one single step. The integral and differential techniques were used for the determination of kinetic parameters. Using the method of Agrawal and Sivasubramanian [R.K. Agrawal, M.S. Sivasubramanian, AIChE J. 33 (1987) 7] for the total degradation zone, the orders of reaction were found in the range of 1.00-2.50 in both the atmospheres (i.e. nitrogen and air) and the activation energy in the range of 27.84-33.44 and 57.41-88.92 kJ mol -1 in nitrogen and air, respectively. The pre-exponential factor was found in the range of 32.1-95.1 and 5.10 x 10 4 to 5.46 x 10 9 min -1 in nitrogen and air atmospheres, respectively

  8. Fracking in the Polish press: Geopolitics and national identity

    International Nuclear Information System (INIS)

    Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

    2014-01-01

    In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

  9. Effect of hot isostatic pressing on reaction-bonded silicon nitride

    Science.gov (United States)

    Watson, G. K.; Moore, T. J.; Millard, M. L.

    1984-01-01

    Specimens of nearly theoretical density have been obtained through the isostatic hot pressing of reaction-bonded silicon nitride under 138 MPa of pressure for two hours at 1850, 1950, and 2050 C. An amorphous phase that is introduced by the hot isostatic pressing partly accounts for the fact that while room temperature flexural strength more than doubles, the 1200 C flexural strength increases significantly only after pressing at 2050 C.

  10. Citizen Journalism in Cyber Media: Protection and Legal Responsibility Under Indonesian Press Law

    OpenAIRE

    Prahassacitta, Vidya

    2017-01-01

    Phenomena of citizen journalism had accepted and become part of cyber media. Cyber media owned and managed by press companies had featured citizen journalists’ information, critics, opinions, and news. Citizen journalism was part of freedom of expression. However, in Indonesia’s press law concept, it was not part of the national press. This created legal issues regarding protection and legal responsibility aspects for both parties. A qualitative research was conducting to solving these issues...

  11. The influence of pressing conditions on SrFe12O19 nano-particles

    DEFF Research Database (Denmark)

    Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens

    2015-01-01

    work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle size. The powder was pressed using Spark Plasma Syntering system at different conditions in order to investigate how the pressing conditions influence the magnetic...... properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature. Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using...

  12. A new press line concept for conveyor belts; Neues Pressenkonzept fuer Foerdergurte

    Energy Technology Data Exchange (ETDEWEB)

    Aumueller, Steffen [Siempelkamp Maschinen- und Anlagenbau GmbH und Co. KG, Krefeld (Germany)

    2010-06-15

    Pressure and temperature are the relevant process parameters for the vulcanisation of rubber products. Particularly, the vulcanisation of large-surface rubber products such as belt conveyors sets large requirements on the mechanical characteristics of the press lines. Siempelkamp Maschinen- und Anlagenbau GmbH and Co. KG (Krefeld, Federal Republic of Germany) is specialized on these requirements. For over 100 years, this company constructs vulcanisation presses for the belt conveyor industry. In the first ten decades, the layout of the press lines according to stiffness and transmission of large forces were in the focus. Till to the late 1980ies, these press lines represented the standard of the belt conveyor industry.

  13. A comparison of muscle activation between a Smith machine and free weight bench press.

    Science.gov (United States)

    Schick, Evan E; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Tran, Tai T; Uribe, Brandon P

    2010-03-01

    The bench press exercise exists in multiple forms including the machine and free weight bench press. It is not clear though how each mode differs in its effect on muscle activation. The purpose of this study was to compare muscle activation of the anterior deltoid, medial deltoid, and pectoralis major during a Smith machine and free weight bench press at lower (70% 1 repetition maximum [1RM]) and higher (90% 1RM) intensities. Normalized electromyography amplitude values were used during the concentric phase of the bench press to compare muscle activity between a free weight and Smith machine bench press. Participants were classified as either experienced or inexperienced bench pressers. Two testing sessions were used, each of which entailed either all free weight or all Smith machine testing. In each testing session, each participant's 1RM was established followed by 2 repetitions at 70% of 1RM and 2 repetitions at 90% of 1RM. Results indicated greater activation of the medial deltoid on the free weight bench press than on the Smith machine bench press. Also, there was greater muscle activation at the 90% 1RM load than at the 70% 1RM load. The results of this study suggest that strength coaches should consider choosing the free weight bench press over the Smith machine bench press because of its potential for greater upper-body muscular development.

  14. Planet Press: an EGU initiative to bring geoscientific research to children

    Science.gov (United States)

    Ferreira, Bárbara

    2016-04-01

    Planet Press (http://www.egu.eu/education/planet-press/) is an EGU educational project that aims to get children (mainly 7-13 year olds), as well as their parents and educators, interested in and engaged with up-to-date scientific research and news. Planet Press articles are short versions of EGU press releases written in child-friendly language. Because EGU press releases cover research published in the various EGU scientific journals, Planet Press focuses on topics as varied as air pollution, glaciers, climate change, earthquakes, ocean sciences, droughts and floods, or space sciences. The texts are reviewed by both scientists and educators to make sure they are accurate and clear to their target audience. By sharing new and exciting geoscientific research with young kids, we hope to inspire them to develop an interest in the Earth, planetary and space sciences. In this presentation, we describe how the Planet Press idea came about, how the project is run, and the challenges and lessons learnt since the launch of this educational initiative in 2014. Planet Press, which has the support of the EGU Committee on Education, is made possible by the work of volunteer scientists and educators who review and translate the texts. We are grateful for the help of Jane Robb, former EGU Educational Fellow, with launching the project. Planet Press is inspired by Space Scoop (http://www.spacescoop.org/), an initiative by UNAWE, the EU-Universe Awareness organisation, that brings astronomy news to children every week.

  15. Void formation in ODS EUROFER produced by hot isostatic pressing

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, Y.; Monge, M.A.; Munoz, A.; Leguey, T.; Pareja, R. [Madrid Univ. Carlos-3, Dept. de Fisica (Spain); Castro, V. de [Oxford Univ., Dept. of Materials (United Kingdom)

    2007-07-01

    Full text of publication follows: An obstacle in the development of oxide dispersion strengthened (ODS) steels for structural applications in fusion reactors is the toughness lack of the material produced by powder metallurgy and consolidated by hot isostatic pressing (HIP). In particular, ODS EUROFER steel with Y{sub 2}O{sub 3} particles appears to exhibit poor impact properties. To asses the capabilities of this material, it is necessary elucidate if its failure is an inherent characteristic of the production process that can not be mitigated by normalizing and tempering treatments. In order to investigate this particular point, the evolution of the structural defects retained in the ODS material during isochronal annealing has been probed by positron annihilation spectroscopy. The present study has been performed on bail milled EUROFER powders consolidated by HIP, containing 0.25 wt % Y{sub 2}O{sub 3} and without Y{sub 2}O{sub 3}. For comparison, un-milled EUROFER powder consolidated under identical conditions, and as-received EUROFER97 plate produced by Boehler AG have been also investigated. Samples from these four materials were isochronally annealed for 90 min up to 1323 K. Materials produced from milled powders had a longer positron lifetime than the one produced from un-milled powder or the EUROFER plate. In the material containing Y{sub 2}O{sub 3}, i.e. in ODS EUROFER, annealing above 723 K produced a continuous increase in the mean positron lifetime <{tau}> up to reach a maximum value of 208 ps after annealing at 1223 K. A similar annealing behavior was observed for Y{sub 2}O{sub 3}-free milled EUROFER (milled EUROFER), but the <{tau}> value steeply changed from {approx}160 ps at 823 K to {approx}200 ps after annealing at 1023 K. Subsequent anneals above this temperature produced meaningless changes in <{tau}>. The <{tau}> increase in milled EUROFER was accompanied by the intensity increase of a lifetime component of {approx}360 ps that is characteristic

  16. Avaliação algimétrica por estímulo nociceptivo térmico e pressórico em cães pré-tratados com levomepromazina, midazolam e quetamina associados ou não ao butorfanol ou buprenorfina The algimetry evaluation for thermic and pressoric nociceptive stimulus in pre treated dogs with methotrimeprazine, midazolam and ketamine associated or not with butorphanol or buprenorphine

    Directory of Open Access Journals (Sweden)

    André Leguthe Rosa

    2005-02-01

    Full Text Available OBJETIVO: Quantificar a dor em cães sob anestesia dissociativa através de estímulo térmico e pressórico e o período hábil de dois analgésicos opióides. MÉTODOS: Empregaram-se 30 cães alocados em três grupos (n=10, onde os animais de GI receberam levomepromazina e midazolam associado na mesma seringa à quetamina. Os animais de GII receberam o mesmo tratamento de GI porém associado ao butorfanol e por fim os animais de GIII receberam o mesmo tratamento de GI associando-se a buprenorfina. Procedeu se a avaliação paramétrica rotineira, empregando-se, entretanto, a termoalgimetria mensurada em °C em média de 52°C e a pressoalgimetria em kg. RESULTADOS: Na termoalgimetria houve diferença significativa em GI nos momentos M0 e M1,e em M4 e M5. Em GII houve diferença em M0, M1, M5 e M6. Em GIII houve diferença entre momentos M0 e M1. Na pressoalgimetria houveram diferenças em GI em diferentes momentos: M0, M2 e M3. Em GII observaram-se diferenças em todos os momentos. Em GIII observaram-se diferenças em M0 e M9. Ocorreram diferenças entre os grupos, sendo o M2 de GII menor que GI e GIII. Já em M4 e M5 de GIII demonstrou-se maior que GI e GII. E na avaliação dos períodos observou-se um período de latência significativamente maior em GI, porém com período hábil e de recuperação menor em relação à GII e GIII. Já a recuperação do tônus postural foi maior em GIII seguido de GII e finalmente de GI. CONCLUSÃO: O método empregado para mensuração do estímulo álgico foi eficiente, observando-se um período hábil analgésico de 3 horas para o butorfanol e de 6 horas para a buprenorfina.PURPOSE: This study aimed at quantifies the pain in dogs under dissociative anesthesia, across thermal and pressoric stimulus and quantify the reasonable period between two different opioids analgesics. METHODS: In this study, 30 dogs were used and, divided into three groups of 10 animals each, in which the animals of GI received

  17. Development of load calculation techniques on screw and screw press energy consumption

    OpenAIRE

    Татарьянц, Максим Сергеевич; Завинский, Сергей Иванович; Трошин, Алексей Георгиевич

    2015-01-01

    The process of pressing of wood chips in screw machines is researched. It is defined processes taking place in different parts of the screw, formulas allowing to calculate the loads acting on the screw flights, as well as to determine the power required for compression. The unit costs of energy consumption and raw materials in the degree of heat pressing are determined

  18. Hydrogen Decrepitation Press-Less Process Recycling of NdFeB sintered magnets

    DEFF Research Database (Denmark)

    Xia, Manlong; Abrahamsen, Asger Bech; Bahl, Christian

    2017-01-01

    A Hydrogen Decrepitation Press-Less Process (HD-PLP) recycling method for recycling of anisotropic NdFeB magnets is demonstrated. The method combines hydrogen decrepitation (HD) disintegration of the initial magnet, powder sieving and the Press-Less Process (PLP), where hydride powder is sintered...

  19. Constructing Childhood: Discourses about School Violence in the Greek Daily Press

    Science.gov (United States)

    Avgitidou, Sofia; Stamou, Anastasia G.

    2013-01-01

    This study explores the construction of discourses about childhood in the Greek daily press. It employs the theoretical frameworks of the new sociology of childhood and critical discourse analysis to question which discourses of childhood are constructed in the daily press presenting cases where children were the victimisers in school violent…

  20. THE IMPACT OF A MECHANICAL PRESS ON THE ACCURACY OF PRODUCTS IN COLD FORGING

    DEFF Research Database (Denmark)

    Krusic, V.; Arentoft, Mogens; Rodic, T.

    2005-01-01

    Cold extrusion is an economic production process for the production of elements of complex forms and accurate dimensions. The first part of the article explains the impact that a mechanical press has on the accuracy of products. It describes the mechanical press main characteristics and in additi...

  1. Student Press Protected by Faculty Academic Freedom under Contract Law at Private Colleges.

    Science.gov (United States)

    Gray, John; Ciofalo, Andrew

    1989-01-01

    Absent the constitutional rights enjoyed by the student press at state institutions of higher education, the administration at a private institution is legally free to control the content of its student press. Explores a theory that shifts the focus to academic freedom protected by contracts between faculty and institutions. (MLF)

  2. The Devotio Moderna and the Printing Press (ca. 1475-1540)

    NARCIS (Netherlands)

    Goudriaan, K.

    2013-01-01

    Six presses owned by religious houses belonging to the Devotio Moderna were active during the period 14751540, five of them run by Brethren of the Common Life, the sixth by Regular Canons. The question is raised whether the production of these presses can be correlated with the nature of this

  3. Evaluation of pressed shredded empty fruit bunch (EFB)-palm oil ...

    African Journals Online (AJOL)

    Pressed-shredded empty fruit bunches (EFB) and palm oil mill effluent (POME) anaerobic sludge from a 500 m3 closed anaerobic digester system was utilized for the co-composting treatment. Scanning electron microscopy (SEM) analysis showed that the shredding-pressing treatment on EFB gave better results in ...

  4. Influence of press temperature on the properties of binderless particleboard made from oil palm trunk

    International Nuclear Information System (INIS)

    Hashim, Rokiah; Said, Norafizah; Lamaming, Junidah; Baskaran, Mohana; Sulaiman, Othman; Sato, Masatoshi; Hiziroglu, Salim; Sugimoto, Tomoko

    2011-01-01

    Research highlights: → Influence of press temperature on binderless particleboard of oil palm trunk. → Modulus of rupture increased with increasing press temperature. → The internal bond strength of samples meets JIS standard. → Water absorption and thickness swelling improved. → Increasing pressing temperature improve properties of the boards. -- Abstract: The objective of this investigation was to evaluate the properties of binderless particleboard manufactured from oil palm trunk as a function of press temperature. Particleboard samples were manufactured with a target density of 0.80 g/cm 3 using press temperatures of 160 o C, 180 o C and 200 o C. The modulus of rupture, internal bond strength, water absorption and thickness swelling of the boards were determined based on Japanese Industrial Standards (JIS). Thermal gravimetric analysis, Fourier transform infrared spectroscopy and field-emission scanning electron microscopy coupled with energy dispersive X-ray analysis were employed to characterize the properties of the raw materials and the manufactured panels. The moduli of rupture of the samples were observed to increase with increasing press temperature, but they did not meet the standard values. However, the internal bond strength of the samples attained satisfactory values according to the JIS standard for all three temperature levels. Water absorption and thickness swelling of the boards decreased with increasing pressing temperature. Based on the findings in this study, increasing the pressing temperature may be considered a potential way of improving the properties of binderless particleboard.

  5. [A man with a painful upper arm after bench press exercise].

    Science.gov (United States)

    Sijtsma, Ben C T; van der Veen, Hugo C; van Raay, Jos J A M

    2015-01-01

    A 22-year-old male bodybuilder presented with pain and a haematoma of his right upper arm after bench press exercises. Suspicion of a pectoralis muscle tear was confirmed by MRI and surgical repair was performed. Ruptures of the pectoralis major muscle are rare, but may occur in young male bodybuilders, typically after bench press exercises.

  6. 49 CFR 1103.26 - Discussion of pending litigation in the public press.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Discussion of pending litigation in the public... § 1103.26 Discussion of pending litigation in the public press. Attempts to influence the action and... unfair to the Board if the facts of pending litigation are made known to the public through the press in...

  7. Using bench press load to predict upper body exercise loads in physically active individuals.

    Science.gov (United States)

    Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

    2013-01-01

    This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p bench press load was a significant (R(2) range from 0.64 to 0.86, p Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.

  8. Influence of pressing on the nanostructure and electrical properties of semiconducting polymer nanolayers

    International Nuclear Information System (INIS)

    Park, Jiho; Kim, Hwajeong; Kim, Youngkyoo

    2010-01-01

    In this work we attempted to change the nanostructure and electrical properties of semiconducting polymer nanolayers by employing a nano-pressing technique. The semiconducting polymer nanolayers, which consist of poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C 61 (PCBM), were spin-coated on to a conducting polymer buffer layer coated on a transparent conducting oxide substrate. The coated P3HT:PCBM samples were precisely pressed using a nanopress system at 70 .deg. C. The nanostructures of the unpressed and the pressed P3HT:PCBM layers were investigated using a grazing incident angle X-ray diffraction (GIXD) system empowered by a synchrotron radiation source while the electrical properties of those samples were examined using a diode-type device. Results showed that the P3HT chain alignment was improved by pressing, accordingly, the device with the pressed layer exhibited enhanced charge transport characteristics.

  9. INFLUENCE OF DIE ANGLES ON THE MICROHARDNESS OF ALUMINUM ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING

    Directory of Open Access Journals (Sweden)

    Ali A Aljubouri

    2010-11-01

    Full Text Available   The die geometry has a massive effect on the plastic deformation behavior during pressing of material processed by equal channel angular pressing (ECAP method; subsequently the properties of the processed material are strongly dependent on it. Two categories of designed and manufactured dies are used for equal channel angular pressing, a 1200 sharp angle and a 900 round –cornered (200 dies, that produce strain per pass through both dies of ~0.7 and ~1.05   respectively. The microhardness developed in Al-Si alloy during ECAP using route BC. The microhardness increased by a factor of >1.5, after only 1 pressing. Subsequently, the hardness increases slightly up to 8 pressings through the 1200 sharp angle die, while it is increased by a factor of ~2.6 after 5 passes by using the 900 round cornered die, comparing with that for the cast workpiece.

  10. Jump Squat is More Related to Sprinting and Jumping Abilities than Olympic Push Press.

    Science.gov (United States)

    Loturco, I; Kobal, R; Maldonado, T; Piazzi, A F; Bottino, A; Kitamura, K; Abad, C C C; Pereira, L A; Nakamura, F Y

    2017-07-01

    The aim of this study was to test the relationships between jump squat (JS) and Olympic push press (OPP) power outputs and performance in sprint, squat jump (SJ), countermovement jump (CMJ) and change of direction (COD) speed tests in elite soccer players. 27 athletes performed a maximum power load test to determine their bar mean propulsive power (MPP) and bar mean propulsive velocity (MPV) in the JS and OPP exercises. Magnitude-based inference was used to compare the exercises. The MPV was almost certainly higher in the OPP than in the JS. The MPP relative to body mass (MPP REL) was possibly higher in the OPP. Only the JS MPP REL presented very large correlations with linear speed ( r> 0.7, for speed in 5, 10, 20 and 30 m) and vertical jumping abilities ( r> 0.8, for SJ and CMJ), and moderate correlation with COD speed ( r= 0.45). Although significant (except for COD), the associations between OPP outcomes and field-based measurements (speed, SJ and CMJ) were all moderate, ranging from 0.40 to 0.48. In a group composed of elite soccer players, the JS exercise is more associated with jumping and sprinting abilities than the OPP. Longitudinal studies are needed to confirm if these strong relationships imply superior training effects in favor of the JS exercise. © Georg Thieme Verlag KG Stuttgart · New York.

  11. Using Perceptual and Neuromuscular Responses to Estimate Mechanical Changes During Continuous Sets in the Bench Press.

    Science.gov (United States)

    Chapman, Mark; Larumbe-Zabala, Eneko; Gosss-Sampson, Mark; Triplett, N Travis; Naclerio, Fernando

    2018-02-22

    The present study analyzed the effectiveness of the OMNI-RES (0-10) and the electromyographic signal for monitoring changes in the movement velocity during a set to muscular failure performed with different relative loads in the bench press exercise (BP). Ten males (30.8 ± 5.7 years) were evaluated on eight separate days with 48 hours of rest between sessions. After determining the 1RM value, participants performed seven sets to failure with the following relative loads ranges: 3090%. The mean accelerative velocity (MAV), the Rating of Perceived Exertion (RPE) and the normalized root mean square (N-RMS) signal from the anterior deltoids were measured for every repetition of each set. The RPE expressed after the first repetition and when the maximum value of MAV was achieved over the sets was lower (p 0.80) than the RPE associated with a 10% drop in MAV and at failure. Furthermore, the initial RPE was useful to distinguish different loading zones between the light relative loads (3090%). Similar, but less clear, differences were observed for the N-RMS. In conclusion, apart from differentiating between relative loads, the RPE and in some cases N-RMS can both reflect changes associated with the initial, maximal, 10% drop in movement velocity and muscular failure during a continuous set in the BP.

  12. Microscopic characterizations of membrane electrode assemblies prepared under different hot-pressing conditions

    International Nuclear Information System (INIS)

    Liang, Z.X.; Zhao, T.S.; Xu, C.; Xu, J.B.

    2007-01-01

    The durability of the membrane electrode assembly (MEA) for direct methanol fuel cells (DMFCs) is one of the most critical issues to be addressed before widespread commercialization of the DMFC technology. In this work, we investigated the effect of the hot-pressing duration on the performance and durability of the MEA prepared by hot-pressing technique. It was found that the 60-min hot pressing at 135 deg. C under the pressure of 4.0 MPa yielded a significantly improved MEA durability than did the 3-min hot pressing (a typical duration in practice) under the same condition, but no substantial difference was found in the cell performance of the MEAs prepared with the two different hot-pressing durations. The reason why the hot-pressing duration had no significant effect on cell performance is explained based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) characterizations of the changes in the physiochemical properties of MEAs and their constituent components, including the anode, cathode and Nafion membrane, before and after hot pressing with different durations

  13. FREEDOM OF PRESS AND JURY TRIAL IN ISTRIA 1848/1849

    Directory of Open Access Journals (Sweden)

    Dunja Pastović

    2015-01-01

    Full Text Available In Istria, as a part of the Austrian legal system, jury trial was initially introduced in the revolutionary year of 1848 only for press offenses, in the framework of aspirations for freedom of thought and expression through the press, which represented the most appropriate medium for the dissemination of new ideas and mobilization of the political masses. Trial by jury was supposed to secure impartial and objective trials, which could not be expected of professional judges due to insufficient guarantees of their impartiality. This paper examines the press-related orders and laws passed during 1848 and 1849 which regulated the freedom of press and jury jurisdiction. On the basis of an analysis of the legislative framework, jurisprudence, and the Istrian press during the examined time period, the author has decided that the introduction of the freedom of the press and jury trials for press offenses in 1848/1849 on the territory of Istria didn’t have a large practical significance.

  14. Direction-specific recruitment of rotator cuff muscles during bench press and row.

    Science.gov (United States)

    Wattanaprakornkul, Duangjai; Halaki, Mark; Cathers, Ian; Ginn, Karen A

    2011-12-01

    Recent studies indicate that rotator cuff (RC) muscles are recruited in a reciprocal, direction-specific pattern during shoulder flexion and extension exercises. The main purpose of this study was to determine if similar reciprocal RC recruitment occurs during bench press (flexion-like) and row (extension-like) exercises. In addition, shoulder muscle activity was comprehensively compared between bench press and flexion; row and extension; and bench press and row exercises. Electromyographic (EMG) activity was recorded from 9 shoulder muscles sites in 15 normal volunteers. All exercises were performed at 20, 50 and 70% of subjects' maximal load. EMG data were normalized to standard maximal voluntary contractions. Infraspinatus activity was significantly higher than subscapularis during bench press, with the converse pattern during the row exercise. Significant differences in activity levels were found in pectoralis major, deltoid and trapezius between the bench press and flexion exercises and in lower trapezius between the row and extension exercises. During bench press and row exercises, the recruitment pattern in each active muscle did not vary with load. During bench press and row exercises, RC muscles contract in a reciprocal direction-specific manner in their role as shoulder joint dynamic stabilizers to counterbalance antero-posterior translation forces. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. Activation of selected shoulder muscles during unilateral wall and bench press tasks under submaximal isometric effort.

    Science.gov (United States)

    Tucci, Helga T; Ciol, Marcia A; de Araújo, Rodrigo C; de Andrade, Rodrigo; Martins, Jaqueline; McQuade, Kevin J; Oliveira, Anamaria S

    2011-07-01

    Controlled laboratory study. To assess the activation of 7 shoulder muscles under 2 closed kinetic chain (CKC) tasks for the upper extremity using submaximal isometric effort, thus providing relative quantification of muscular isometric effort for these muscles across the CKC exercises, which may be applied to rehabilitation protocols for individuals with shoulder weakness. CKC exercises favor joint congruence, reduce shear load, and promote joint dynamic stability. Additionally, knowledge about glenohumeral and periscapular muscle activity elicited during CKC exercises may help clinicians to design protocols for shoulder rehabilitation. Using surface electromyography, activation level was measured across 7 shoulder muscles in 20 healthy males, during the performance of a submaximal isometric wall press and bench press. Signals were normalized to the maximal voluntary isometric contraction, and, using paired t tests, data were analyzed between the exercises for each muscle. Compared to the wall press, the bench press elicited higher activity for most muscles, except for the upper trapezius. Levels of activity were usually low but were above 20% maximal voluntary isometric contraction for the serratus anterior on both tasks, and for the long head triceps brachii on the bench press. Both the bench press and wall press, as performed in this study, led to relatively low EMG activation levels for the muscles measured and may be considered for use in the early phases of rehabilitation.

  16. The Law Enforcement of Journalism Profession in The Context of Press Freedom

    Directory of Open Access Journals (Sweden)

    Sri Ayu Astuti

    2014-06-01

    Full Text Available Law No. 40 of 1999 on Press is a manifestation of respect for the legal protection of press workers . Press in their role contributes to the intellectual level of the nation, through the information submitted in news publications, as well as bringing stipulated by the 1945 Constitution of Republic of Indonesia on freedom of thought and speech as Human Rights. However, in carrying out their journalistic duties, the Press should have responsibilities in the news process, and must not violate the ethics of his profession. Press that violates profession intentionally or unintentionally in the writing and publication of news in the public sphere, will still do the law enforcement process for any misuse of the meaning of freedom of speech and thought that harm others. Enforcement of this law, in line with the revocation of the right of immunity of profession issued by the Constitutional Court, which means the Press as a Professional must do the job with the precautionary principle, not by carelessness due to the trapped arrogance of jobs, and injuring other people's human rights, even doing work profession with not commendable behavior. How To Cite: Astuti, S. (2014. The Law Enforcement of Journalism Profession in The Context of Press Freedom. Rechtsidee, 1(2, 175-190. doi:http://dx.doi.org/10.21070/jihr.v1i2.97

  17. Phase-Division-Based Dynamic Optimization of Linkages for Drawing Servo Presses

    Science.gov (United States)

    Zhang, Zhi-Gang; Wang, Li-Ping; Cao, Yan-Ke

    2017-11-01

    Existing linkage-optimization methods are designed for mechanical presses; few can be directly used for servo presses, so development of the servo press is limited. Based on the complementarity of linkage optimization and motion planning, a phase-division-based linkage-optimization model for a drawing servo press is established. Considering the motion-planning principles of a drawing servo press, and taking account of work rating and efficiency, the constraints of the optimization model are constructed. Linkage is optimized in two modes: use of either constant eccentric speed or constant slide speed in the work segments. The performances of optimized linkages are compared with those of a mature linkage SL4-2000A, which is optimized by a traditional method. The results show that the work rating of a drawing servo press equipped with linkages optimized by this new method improved and the root-mean-square torque of the servo motors is reduced by more than 10%. This research provides a promising method for designing energy-saving drawing servo presses with high work ratings.

  18. Engineering work plan for container venting system drill press assembly troubleshooting. Revision 1

    International Nuclear Information System (INIS)

    Prather, M.C.

    1994-11-01

    This work plan is for troubleshooting the current CVS drill press to ensure that the drill bit assembly doesn't bind in the press plate. A drill press assembly has been fabricated for the Container Venting System (CVS). The drill bit assembly has bound in the press plate in previous revisions of this design. Initial troubleshooting of the drill press per Rev. 0 of this work plan was performed at the 200W Kaiser Machine Shop under Work Package 2H9401670F, Internal Work Order E20027. The drill press operated without jamming. Then, during the pre-operational test on 11/14/17 and the operational test on 11/17/94, two drum lids were drilled. Immediately after the test on 11/17/94, the drill was again operated, and it jammed. An inspection found shavings at the bottom of the drill bit assembly, between the drill bit sleeve and the press plate bore. This revised work plan provides direction for the machine shop to diagnose and correct this recent problem

  19. Strength-ductility relationships in intermediate purity hot-pressed beryllium

    International Nuclear Information System (INIS)

    Stonehouse, A.J.; Bielawski, C.A.; Paine, R.M.

    1977-01-01

    The strength of vacuum hot-pressed, intermediate purity beryllium may be substantially increased without sacrifice of the strain capacity of the present grade (S-65) through decrease in the average grain size. Tensile strength of 517 MPa, 0.2% offset yield strength of 414 MPa with minimum 3% tensile elongation in all test directions could be commercially achieved. The tangent modulus of such material is quite attractive and suffers only about 10% degradation from room temperature to 260 0 C. The tangent modulus is dramatically enhanced by the presence of a yield point. The ductility of the materials studied did not appear to be affected by the BeO content across the range of 0.5 to 2.0% using nominal -44 to -15 μm powder particle sizes. All fine-grained pressings exhibited yield points in the as-pressed condition. Either full-density or sub-density hot-pressed billets given a hot isostatic pressing treatment without the use of cans showed only slight yield points after the HIP treatment with essentially the same strength and ductility factors as in the pressed condition. A plot of grain size vs yield strength in the as-pressed condition projects to an intercept with the fracture strength line at about 3 μm grain size. A similar plot after the HIP treatment shows a yield strength line parallel to the fracture strength line with no projected intercept predicting a completely brittle material. (author)

  20. Hot and cold pressing of (La,Ce)PO4-based nuclear waste forms

    International Nuclear Information System (INIS)

    Floran, R.J.; Rappaz, M.; Abraham, M.M.; Boatner, L.A.

    1981-01-01

    Synthetic analogs of the mineral monazite [(Ce,La,Ca,Th,U)(P,Si)O 4 ] are promising host phases for the isolation of actinide wastes. In the present investigation, the optimal conditions necessary to form high-density, simulated waste pellets from calcined LaPO 4 and CePO 4 powders have been examined. Pellets that are close to the theoretical density are necessary in order to minimize porosity and hence potential avenues along which fluid/waste interactions can take place. Calcined powders prepared by a urea precipitation process were cold pressed and hot pressed under a range of controlled conditions to form coherent, cylindrical pellets. Changes in density were examined as a function of pressure, temperature and duration of sintering. For cold-pressed pellets, a significant increase in density occurs during sintering between 1000 0 C and 1100 0 C. This increase is correlated with substantial grain coarsening of the pellet microstructure. A comparison of cold and hot pressing techniques suggests that, only after sintering, does the density of cold-pressed pellets approach (but not equal) that of the hot-pressed pellets. Densities >90% of the theoretical value of 5.11 g/cm 3 are easily attainable by hot pressing without sintering. The significance of density differences on pellet stability will be investigated in future leaching studies. The apparent advantages of the higher densities achieved by hot pressing must be weighed against the increased technological/engineering complexities involved when working at sustained high temperatures in a remote environment. Thus the cold pressing technique may ultimately prove more practical for large-scale commercial operations