Design & Development of FPGA Based VME Bus Controller

OpenAIRE

Himali Patel; Poornima Talwai

2015-01-01

The VME bus interface Controller (VIC068A) is used to interface Local CPU bus and VME bus. VME Bus Controller is used in wide application areas where high reliability, good accuracy and high speed are desired to withstand industrial environment like nuclear power plant and process industries. VME Bus controller can configure as Master, Slave, Interrupt Handler, arbiter as well as power monitor. Commercial VME Bus interface controller chips are available from a few vend...

Design of a VME bus controller based on ARM7 with embedded system

International Nuclear Information System (INIS)

Wang Yanyu; Qiao Weimin; Guo Yuhui; Li Xiaoqiang; Chinese Academy of Sciences, Beijing

2005-01-01

This paper introduces the solution of a VME-like bus Controller briefly. Samsung's S3C4510B 16/32-bit RISC microcontroller with ARM7 core is a high-performance microcontroller support Ethernet-based systems. The authors use S3C4510B, VIC-068A and CPLD devices built a high speed data route from VME-like Bus to network, the fast link between background computer data-base and front-end target module is achieved over network. (authors)

New control system: solutions for CAMAC and VME integration

International Nuclear Information System (INIS)

David, L.; Lecorche, E.

1991-01-01

Three solutions for a new control system are presented. This system must integrate the whole existing CAMAC park with its LTR software, the VME modules for new interfaces and new processes, user interfaces integrating workstations for best graphic visualizations of setting tasks, the use of ETHERNET net and of the programming language ADA. (A.B.). 3 figs

Using VME to leverage legacy CAMAC electronics into a high speed data acquisition system

International Nuclear Information System (INIS)

Anthony, P.L.

1997-06-01

The authors report on the first full scale implementation of a VME based Data Acquisition (DAQ) system at the Stanford Linear Accelerator Center (SLAC). This system was designed for use in the End Station A (ESA) fixed target program. It was designed to handle interrupts at rates up to 120 Hz and event sizes up to 10,000 bytes per interrupt. One of the driving considerations behind the design of this system was to make use of existing CAMAC based electronics and yet deliver a high performance DAQ system. This was achieved by basing the DAQ system in a VME backplane allowing parallel control and readout of CAMAC branches and VME DAQ modules. This system was successfully used in the Spin Physics research program at SLAC (E154 and E155)

Development of a VME multi-processor system for plasma control at the JT-60 Upgrade

International Nuclear Information System (INIS)

Takahashi, M.; Kurihara, K.; Kawamata, Y.; Akasaka, H.; Kimura, T.

1992-01-01

Design and initial operation results are reported of a VME multi-processor system [1] for plasma control at a large fusion device named 'the JT-60 Upgrade' utilizing three 32-bit MC88100 based RISC computers and VME components. Development of the system was stimulated by faster and more accurate computation requirements for the plasma position and current control. The RISC computers operate at 25 MHz along with two cashe memories named MC88200. We newly developed VME bus modules of up/down counter, analog-to-digital converter and clock pulse generator for measuring magnetic field and coil current and for synchronizing the processing in the three RISCs and direct digital controllers (DDCs) of magnet power supplies. We also evaluated that the speed of the data transfer between the VME bus system and the DDCs through CAMAC highways satisfies the above requirements. In the initial operation of the JT-60 upgrade, it has been proved that the VME multi-processor system well controls the plasma position and current with a sampling period of 250 μsec and a delay of 500 μsec. (author)

VME-based remote instrument control without ground loops

CERN Document Server

Belleman, J; González, J L

1997-01-01

New electronics has been developed for the remote control of the pick-up electrodes at the CERN Proton Synchrotron (PS). Communication between VME-based control computers and remote equipment is via full duplex point-to-point digital data links. Data are sent and received in serial format over simple twisted pairs at a rate of 1 Mbit/s, for distances of up to 300 m. Coupling transformers are used to avoid ground loops. The link hardware consists of a general-purpose VME-module, the 'TRX' (transceiver), containing four FIFO-buffered communication channels, and a dedicated control card for each remote station. Remote transceiver electronics is simple enough not to require micro-controllers or processors. Currently, some sixty pick-up stations of various types, all over the PS Complex (accelerators and associated beam transfer lines) are equipped with the new system. Even though the TRX was designed primarily for communication with pick-up electronics, it could also be used for other purposes, for example to for...

Changing of the ELAN data acquisition to an integrated system with VME frontend acquisition and VAX work station analysis; Umruestung der ELAN-Datenerfassung auf ein integriertes System mit VME-Frontend-Erfassung und VAX-Workstation-Analyse

Energy Technology Data Exchange (ETDEWEB)

Foerster, W.

1991-07-01

A new data acquisition system for the experiment ELAN at the electron stretcher accelerator ELSA had become necessary due to changes in the experimental setup. The data acquisition and analysis which formerly both were performed by a single computer system are now separately done by a VMEbus-Computer and a VAX-Workstation. Based on the software components MECDAS (Mainz Experiment Control and Data Acquisition System) and GOOSY (GSI Online Offline System) a powerfull tool for data acquisition and analysis has been adapted to the requirements of the ELAN experiment. (orig.). [Deutsch] Ziel dieser Arbeit war die Bereitstellung eines neuen Datenerfassungssystems fuer das ELAN-Experiment am Physikalischen Institut der Universitaet Bonn. Als Grundlage hierzu dienten das an der Universitaet Mainz entwickelte System MECDAS und das von der Gesellschaft fuer Schwerionenforschung in Darmstadt stammende Softwarepaket GOOSY. Die Auslese der vom Experiment kommenden Daten wird ueber ein CAMAC-System von MECDAS auf einem VME-Rechner vorgenommen. Dazu wurden in MECDAS neue Auslesealgorithmen eingebettet, die sich teilweise aus experimentellen Notwendigkeiten ergaben und zum anderen den vollen 24-bit Zugriff auf den CAMAC-Bus ermoeglichten. Die gepufferten Daten werden zu einer VAX-Workstation weitergeleitet, auf der sie von GOOSY-Prozessen gesichert und anaylsiert werden. (orig.).

Determination of left ventricular heart volume by fast MRI in breath-hold technique: how different are quantitative ventricular angiography, quantitative MRI, and visual echocardiography?; Linksventrikulaere Herzvoluminabestimmung mittels schneller MRT in Atemanhaltetechnik: Wie unterschiedlich sind quantitativer Herzkatheter, quantitativer MRT und visuelle Echokardiographie?

Energy Technology Data Exchange (ETDEWEB)

Rominger, M.B.; Bachmann, G.F. [Giessen Univ. (Germany). Diagnostische Radiologie; Kerckhoff-Klinik GmbH, Bad Nauheim (Germany). Projektgruppe Magnetresonanztomographie; Pabst, W. [Giessen Univ. (Germany). Inst. fuer Medizinische Informatik; Ricken, W.W. [Kerckhoff-Klinik GmbH, Bad Nauheim (Germany). Projektgruppe Magnetresonanztomographie; Dinkel, H.P.; Rau, W.S. [Giessen Univ. (Germany). Diagnostische Radiologie

2000-01-01

Goal: Comparison of fast MRI, echocardiography (Echo), and ventricular angiography (Cath) in the assessment of left ventricular global function. Methods: Fast MRI in short axis plane, biplane Cath, and 2D Echo were performed in 62 patients [35 coronary artery diseases, 16 acquired valvular diseases (VD), 9 dilated cardiomyopathies (DCM), 1 congenital heart disease and 1 heart transplantation]. Enddiastolic (EDV), endsystolic (ESV), stroke volumes (SV), cardiac output (CO), and ejection fraction (EF) were compared in MRI and Cath. EF was visually estimated in 2D Echo by an experienced observer. Results: In comparison to MRI, Cath overestimated EF by 8.4%, and Echo underestimated EF by 5.6%. The limits of agreement between MRI and Cath in EF were {+-}23.8%, between MRI and Echo {+-}18%, and between Echo and Cath {+-}19.4%. Significant differences were found between Cath and MRI in EDV, SV, and CO, but not for ESV. The best agreement in EF was found in the group with DCM, the worst in the group with VD. Conclusion: Important systemic and random errors were found in the comparison of MRI, Echo, and Cath. For therapy decision and follow-up, the methods should not be exchanged unscrupulously. (orig.) [German] Ziel: Methodenvergleich von schneller Magnetresonanztomographie (MRT), Echokardiographie (Echo) und Herzkatheter (HK) in der Bestimmung linksventrikulaerer globaler Funktionsparameter. Material und Methoden: Bei 62 Patienten (35 koronare Herzerkrankungen, 16 Herzklappenvitien (KV), 9 idiopathische dilatative Kardiomyopathien (DCM), 1 kongenitale Herzerkrankung und 1 Herzktransplantation) wurde ein Methodenvergleich zwischen schneller Cine MRT im Kurzachsenschnitt, biplanarem HK und 2D Echo durchgefuehrt. Verglichen wurden in MRT und HK linksventrikulaeres enddiastolisches (EDV) und endsystolisches Volumen (ESV), Schlagvolumen (SV), Herzzeitvolumen (HZV) und Ejektionsfraktion (EF). In der Echo wurde die EF visuell durch einen erfahrenen Untersucher bestimmt

Data acquisition on a VME/68000 system

International Nuclear Information System (INIS)

Aoun, Walid

1990-01-01

A data acquisition system for correlated or independent events handling has been designed. This system is based on VME boards and 68000 processors. The software include data taking, on line sort and storage on magnetic tape. A driver has been written under the UNIX operating system for a high graphic resolution VME board, this implementation was provided as an off-line facility. (author) [fr

VME multiprocessor system for plasma control at the JT-60 Upgrade

International Nuclear Information System (INIS)

Kimura, T.; Kurihara, K.; Takahashi, M.; Kawamata, Y.; Akasaka, H.; Matsukawa, M.

1989-01-01

In this paper design and preliminary tests are reported of a VME multiprocessor system for the JT-60 Upgrade plasma control utilizing three MC88100 based RISC computers and VME buses. The design of the VME system was stimulated by faster and more accurate computation requirements for the plasma position and shape control

Progress report on R + D activities of the Institute fuer Reaktorenentwicklung in 1980

International Nuclear Information System (INIS)

1981-02-01

The Institute fuer Reaktorentwicklung is mostly concerned with technical problems in the development and safety assurance of nuclear facilities. The tasks, some of which are carried out in cooperation with other internal and external institutions, are of a theoretical and experimental nature, most of them in the field of reactor safety. The two main fields are the Projekt Schneller Brueter (PSB) and Projekt Nukleare Sicherheit (PNS). The contributions for PSB, i.e. layout and safety of sodium-cooled fast breeder reactors, refer to investigations of the thermohydraulic and neutron-kinetical response of the core to accidents of very low probability as well as investigations of the effects of local core coling disturbances, with special consideration to possible damage propagation mechanisms and the possibility of detecting these processes. In the field of LWR safety, dynamic loads on core internals have been investigated during the HDR blowdown experiments as well as dynamic loads on containment structures and fuel rod behaviour during LOCA. (orig.) [de

A VME-based readout system for the CMS Preshower sub-detector

CERN Document Server

Antchev, G; Bialas, W; Da Silva, J C; Kokkas, P; Manthos, N; Reynaud, S; Sidiropoulos, G; Snoeys, W; Vichoudis, P

2007-01-01

The CMS preshower is a fine grain detector that comprises 4288 silicon sensors, each containing 32 strips. The raw data are transferred from the detector to the counting room via 1208 optical fibres. Each fibre carries a 600-byte data packet per event. The maximum average level-1 trigger rate of 100 kHz results in a total data flow of ~72 GB/s from the preshower. For the readout of the preshower, 56 links to the CMS DAQ have been reserved, each having a bandwidth of 200 MB/s (2 kB/event). The total available downstream bandwidth of GB/s necessitates a reduction in the data volume by a factor of at least 7. A modular VME-based system is currently under development. The main objective of each VME board in this system is to acquire on-detector data from at least 22 optical links, perform on-line data reduction and pass the concentrated data to the CMS DAQ. The principle modules that the system is based on are being developed in collaboration with the TOTEM experiment.

Soft Real-Time PID Control on a VME Computer

Science.gov (United States)

Karayan, Vahag; Sander, Stanley; Cageao, Richard

2007-01-01

microPID (uPID) is a computer program for real-time proportional + integral + derivative (PID) control of a translation stage in a Fourier-transform ultraviolet spectrometer. microPID implements a PID control loop over a position profile at sampling rate of 8 kHz (sampling period 125microseconds). The software runs in a strippeddown Linux operating system on a VersaModule Eurocard (VME) computer operating in real-time priority queue using an embedded controller, a 16-bit digital-to-analog converter (D/A) board, and a laser-positioning board (LPB). microPID consists of three main parts: (1) VME device-driver routines, (2) software that administers a custom protocol for serial communication with a control computer, and (3) a loop section that obtains the current position from an LPB-driver routine, calculates the ideal position from the profile, and calculates a new voltage command by use of an embedded PID routine all within each sampling period. The voltage command is sent to the D/A board to control the stage. microPID uses special kernel headers to obtain microsecond timing resolution. Inasmuch as microPID implements a single-threaded process and all other processes are disabled, the Linux operating system acts as a soft real-time system.

Assessment of VME-PCI Interfaces with Linux Drivers

CERN Document Server

Schossmater, K; CERN. Geneva

2000-01-01

Abstract This report summarises the performance measurements and experiences recorded by testing three commercial VME-PCI interfaces with their Linux drivers. These interfaces are manufactured by Wiener, National Instruments and SBS Bit 3. The developed C programs are reading/writing a VME memory in different transfer modes via these interfaces. A dual processor HP Kayak XA-s workstation was used with the CERN certified Red Hat Linux 6.1 running on it.

Research on application of VME based embedded linux

International Nuclear Information System (INIS)

Ji Xiaolu; Ye Mei; Zhu Kejun; Li Xiaonan; Wang Yifang

2010-01-01

It describes the feasibility and realization of using embedded Linux in DAQ readout system of high energy physics experiment. The first part, the hardware and software framework is introduced. And then emphasis is placed on the key technologies during the system realization. The development is based on the VME bus and vme u niverse driver. Finally, the test result is presented: the readout system can work well in Embedded Linux OS. (authors)

A Camac-VME-MacIntosh data acquisition system for nuclear experiments

International Nuclear Information System (INIS)

Anzalone, A.; Giustolisi, F.

1989-01-01

A multiprocessor system for data acquisition and analysis in low energy nuclear physics has been realized at the Laboratorio Nazionale del Sud. the system is built around Camac, VME-bus and MacIntosh PC. A multiprocessor software has been developed, using RTF, Macsys and Cern cross-software. The execution of several programs which run on several VME-CPU's and on an external PC, is coordinated by a mail box protocol. No operating system is used on the VME-CPU's

MacVEE - the intimate Macintosh-VME system

International Nuclear Information System (INIS)

Taylor, B.G.

1986-01-01

The marriage of a mass-produced personal computer with the versatile VMEbus and CAMAC systems creates a cost-effective solution to many laboratory small system requirements. This paper describes MacVEE (Microcomputer Applied to the Control of VME Electronic Equipment), a novel system in which an Apple Macintosh computer is equipped with a special interface which allows it direct memory-mapped access to single or multiple VME and CAMAC crates interconnected by a ribbon cable bus. The bus is driven by an electronics plinth called MacPlinth, which attaches to the computer and becomes an integral part of it. (Auth.)

A working, VME-based, 106MHz FADC data acquisition system for the tracking detectors at D0

Energy Technology Data Exchange (ETDEWEB)

Angstadt, R.G.; Chase, B.E.; Fellenz, B.J.; Johnson, M.E.; Martin, M.I.; Matulik, M.S.; Saewert, G.W.; Utes, M.J. [Fermi National Accelerator Lab., Batavia, IL (United States); DeGroot, D.C. [Northwestern Univ., Evanston, IL (United States). Dept. of Electrical Engineering and Computer Science

1991-12-01

A data acquisition system for the tracking detectors of the D0 Colliding Detector has been built and is operational, taking cosmic ray data. It is composed of 8200 channels of 106MHz 8-bit Flash Analog to Digital Converters(FADC). These are configured as sixteen channels per FADC Module, up to sixteen FADC Modules per crate, and a total of thirty-six 9U VME crates. A crate controller module, the control system interface, and a high speed data buffer/driver complete the FADC crate. Design and operation details are described. 6 refs.

Mega hub for intermodal transport - the planning of the most advanced container terminal in the world; Mega-Drehscheibe fuer den Kombinierten Verkehr - Planung des modernsten Containerbahnhofes der Welt

Energy Technology Data Exchange (ETDEWEB)

Franke, K.P. [Noell Stahl- und Maschinenbau GmbH, Wuerzburg (Germany). Abt. Hafentechnik

1998-12-31

The introduction of innovative mega hub systems for the operation of cargo trains is a promising starting point for increasing the efficiency of intermodal transport. A first mega hub as it is known has been planned for Northern Germany with its centre in Lehrte near Hannover. Instead of shunting the waggons, containers will be transferred from train to train at the mega hub. This is not only faster, but also more economical and thus more attractive to rail transport clients. No other known system can achieve such high transhipment/shunting capacities per surface unit. The design of the system guarantees the maximum degree of flexibility in transhipment operations. A high degree of automation will ensure the quality and speed of transhipment. The technical development of the fast transhipment system (FTS) by Noell has been completed. (orig.) [Deutsch] Ein vielversprechender Ansatz fuer die Steigerung der Leistungsfaehigkeit des Kombinierten Verkehrs (KV) ist die Einfuehrung von innovativen Drehscheibensystemen fuer den Betrieb der Cargo-Zuege. Eine erste sogenannte Mega-Drehscheibe wurde fuer den Norden Deutschlands mit Zentrum Lehrte bei Hannover geplant. Statt zu rangieren sollen in der Mega-Drehscheibe die Behaelter zwischen den Zuegen umsteigen. Das ist schneller, kostenguenstiger und damit attraktiver fuer den Bahnkunden. Darueber hinaus ist kein System bekannt, bei dem eine so hohe Umschlag-/Umstelleistung je Flaecheneinheit realisiert werden kann. Die Gestaltung der Anlage gewaehrt eine maximale Flexibilitaet im Umschlagbetrieb. Ein hoher Automatisierungsgrad wird Qualitaet und Schnelligkeit des Umschlages sichern. Die technische Entwicklung der Schnellumschlagtechnik seitens Noell ist abgeschlossen. (orig.)

VME as a front-end electronics system in high energy physics experiments

International Nuclear Information System (INIS)

Ohska, T.K.

1990-01-01

It is only a few years since the VME became a standard system, yet the VME system is already so much more popular than other systems. The VME system was developed for industrial applications and not for the scientific research, and high energy physics field is a tiny market when compared with the industrial market. Considerations made here indicate that the VME system would be a good one for a rear-end system, but would not be a good candidate for front-end electronics in physics experiments. Furthermore, there is a fear that the VXI bus could become popular in this field of instrumentation since the VXI system is backed up by major suppliers of instrumentation in the high energy physics field. VXI would not be an adequate system for front-end electronics, yet advertised to be one. It would be worse to see the VXI system to become a standard system for high energy physics instrumentation than the VME system to be one. The VXI system would do a mediocre job so that people might be misled to think that the VXI system can be used as front-end system. (N.K.)

A flexible VME-based multiparametric apparatus for coincidence spectroscopy and investigation of parameters of detectors

International Nuclear Information System (INIS)

Jakubek, J.

2000-01-01

The methodology of Coincidence Instrumental Activation Analysis (CIAA) based on a three-parameter gamma-gamma coincidence spectrometer with two high-purity Ge detectors is presented. A flexible coincidence system was built on standard NIM spectrometric modules connected to a VME or CAMAC data acquisition system. The detailed setup of the system optimized for the maximum energy resolution, maximum data throughput (dead time correction, pile-up rejection) and maximum flexibility is described. The use of different data acquisition platforms is discussed (VME bus with several different controllers, CAMAC bus). The software developed for reading and basic processing of measured data is also described. The possibilities of off-line data evaluation are discussed. The system was tested with respect to its compliance with the criteria of the CIAA method. Some results of measurement by this method are also presented. The flexibility of the system is demonstrated on its ability to measure the time characteristics of different detectors. (author)

Versatile Data Acquisition and Controls for EPICS using VME-based FPGAs

International Nuclear Information System (INIS)

Trent Allison; Roger Flood

2001-01-01

Field Programmable Gate Arrays (FPGAs) have provided versatile VME based data acquisition and control systems with minimal development times for the Thomas Jefferson National Accelerator Facility (Jefferson Lab). FPGAs have been used to interface with VME controllers using both standard A16 and A24 address modes. VME vector-interrupt capability has also been implemented for timing issues in some applications. FPGA designs have additionally been used to provide controls for various systems by interfacing with Analog to Digital Converters (DAC), interlocks, and other drive signals. These controls can be molded to the individual needs of each system and can provide operators with indicators and controls in EPICS via a VME interface. This allows the developer to choose components and make specifications that are not available commercially. Jefferson Lab has begun developing standard FPGA libraries that result in quick turnaround times and inexpensive designs. There have been approximately eight VME based FPGA designs implanted in one department at Jefferson Lab and they are becoming more widespread. FPGAs continue to become larger and faster enabling systems to be incorporated on one integrated circuit. Inherently, FPGAs can process data faster than many microprocessors due to the small processing overhead associated with a custom FPGA design. The ability to modify FPGA code enables the developer to easily implement future additions to a system, making the design flexible and expandable. This work supported by the U.S. DOE Contract No. DE-AC05-84ER40150

AVME readout module for multichannel ASIC characterization

International Nuclear Information System (INIS)

Borkar, S.P.; Lalwani, S.K.; Ghodgaonkar, M.D.; Kataria, S.K.; Reynaud, Serge; )

2004-01-01

Electronics Division, BARC has been working on the development of multi-channel ASIC, called SPAIR (Silicon-strip Pulse Amplifier Integrated Readout). It contains 8 channels of preamplifier, shaper and track-and-hold circuitry. Electronics Division has also actively participated in development of test setup for the front-end ASIC, called PACE, for the preshower detector of the Compact Muon Solenoid (CMS) Experiment at CERN, Geneva. PACE is a 32 channel ASIC for silicon strip detector, containing preamplifier, shaper, calibration circuitry, switched capacitor array, readout amplifier per channel and an analog multiplexer. A VME Readout Module, (VRM) is developed which can be utilized in data acquisition from ASICs like PACE and SPAIR. The VRM can also be used as the Detector Dependent Unit for digitally processing the data received from the front-end electronics on the 16-bit LVDS port. The processed, data can be read by the VME system. Thus the VRM is very useful in building an ASIC characterization system and/or the automated ASIC production testing system. It can be used also to build the applications using such ASICs. To cater to various requirements arising in future, variety of VME modules are to be developed like ADCs, DACs and D 1/0. VME interface remains a common part to all these modules. The different functional blocks of these modules can be designed and fabricated on small piggyback boards (called Test Boards) and mounted on the VRM, which provides the common VME interface. The design details and uses of VRM are presented here. (author)

A CAMAC-VME-Macintosh data acquisition system for nuclear experiments

Science.gov (United States)

Anzalone, A.; Giustolisi, F.

1989-10-01

A multiprocessor system for data acquisition and analysis in low-energy nuclear physics has been realized. The system is built around CAMAC, the VMEbus, and the Macintosh PC. Multiprocessor software has been developed, using RTF, MACsys, and CERN cross-software. The execution of several programs that run on several VME CPUs and on an external PC is coordinated by a mailbox protocol. No operating system is used on the VME CPUs. The hardware, software, and system performance are described.

Progress report on research and development activities of the Institut fuer Neutronenphysik und Reaktortechnik in 1980

International Nuclear Information System (INIS)

1981-02-01

The Institut fuer Neutronenphysik und Reaktortechnik carries out research in nuclear enginering especially in the context of the development of sodium-cooled fast breeder reactors. The institute does theoretical and experimental work in equal shares. Most of the work is done in cooperation with other institutes and industrial groups. In the framework of the Projekt Schneller Brueter , the institute investigates the layout and safety problems, from a reactor physics point of view of large fast breeder cores. Problems concerning the effects of LWR accidents on population and environment are investigated in the Projekt Nukleare Sicherheit . To the Projekt Wiederaufarbeitung , the institute is contributing work on fuel cycle physics and the development of a suitable instrumentation. In the field of nuclear safeguards, the implementation of monitoring systems is being investigated. Research outside projects is being done on technical and physical problems of fusion by inertial confinement and application of nuclear power on the transportation sector with hydrogen as an energy source. The main results obtained in 1980 in the various projects are presented. (orig./RW) [de

The ATLAS FTK Auxiliary Card: A Highly Functional VME Rear Transition Module for a Hardware Track Finding Processing Unit

CERN Document Server

Alison, John; The ATLAS collaboration; Bogdan, Mircea; Bryant, Patrick; Cheng, Yangyang; Krizka, Karol; Shochet, Mel; Tompkins, Lauren; Webster, Jordan S

2014-01-01

The ATLAS Fast TracKer is a hardware-based charged particle track finder for the High Level Trigger system of the ATLAS Experiment at the LHC. Using a multi-component system, it finds charged particle trajectories of 1 GeV/c and greater using data from the full ATLAS silicon tracking detectors at a rate of 100 kHz. Pattern recognition and preliminary track fitting are performed by VME Processing Units consisting of an Associative Memory Board containing custom associative memory chips for pattern recognition, and the Auxiliary Card (AUX), a powerful rear transition module which formats the data for pattern recognition and performs linearized fits on track candidates. We report on the design and testing of the AUX, which utilizes six FPGAs to process up to 32 Gbps of hit data, as well as fit the helical trajectory of one track candidate per nanosecond through a highly parallel track fitting architecture. Both the board and firmware design will be discussed, as well as the performance observed in tests at CERN ...

VME online system of the Bonn polarized nucleon targets and polarization measurements on NH3

International Nuclear Information System (INIS)

Thiel, W.

1991-02-01

The measurement of spin observables is the main purpose of the PHOENICS detector at the Bonn Electron Accelerator ELSA. Therefore a new frosen spin target was built allowing any spin orientation by means of two perpendicular holding fields and the use of a polarizing field up to 7 Tesla. With a vertical dilution refrigerator the polarization can be frozen at a temperature of 70 mK. This thesis describe a VME based control and monitor system for the various parts of this target. It mainly consists of a VIP processor together with different kinds of I/O and interface boards. Caused by its modular structure in hard- and software it can be easyly set up to control and monitor different hardware environments. A menu and command oriented user interface running on an ATARI computer allows a comfortable operation. Secondly the new NMR system is described in detail. It is based on the Liferpool module allowing a dispersion user interface running on an ATARI computer allows a comfortable operation. Secondly the new NMR system is described in detail. It is based on the Liverpool module allowing a dispersion free detection and a simple adjustment to different magnetic fields. A similar VME system takes care of all the necessary task for the polarization measurements. Fast optodecoupled analog I/O modules a e used as an interface to the NMR hardware. Finally the first measurements with this target are presented. Using NH 3 as target material and a polarizing field of 3.5 Tesla a proton polarization of +94% and -100% could be achieved. By lowering the magnetic field to 0.35 Tesla a superradiance effect was observed. (orig.)

Automatically gated image-guided breath-hold IMRT is a fast, precise, and dosimetrically robust treatment for lung cancer patients

Energy Technology Data Exchange (ETDEWEB)

Simeonova-Chergou, Anna; Jahnke, Anika; Siebenlist, Kerstin; Stieler, Florian; Mai, Sabine; Boda-Heggemann, Judit; Wenz, Frederik; Lohr, Frank; Jahnke, Lennart [University Medical Center Mannheim, University of Heidelberg, Department of Radiotherapy and Oncology, Mannheim (Germany)

2016-03-15

delivery precision for patients with small and larger lung tumors. (orig.) [German] Die Hochdosisstrahlentherapie des Bronchialkarzinoms ist eine Herausforderung. Bis zu 2 cm kann sich der Tumor in kraniokaudaler und anteroposteriorer Richtung bewegen - abhaengig vom Atemzyklus. Die Tumorverschiebung nimmt mit der Behandlungsdauer zu, was also die Behandlungsunsicherheit vermehrt. In der vorliegenden Studie wurde untersucht, ob die automatisch gesteuerte, Cone-Beam-Computertomographie(CBCT)-kontrollierte, intensitaetsmodulierte stereotaktische Strahlentherapie (''stereotactic body radiation therapy'', SBRT) im Atemanhalt nach schneller tiefer Inspiration (''deep inspiration breath hold'', DIBH) ohne Ausgleichskoerper (''flattening filter free'', FFF) und die mit einem Ausgleichskoerper applizierte normal fraktionierte intensitaetsmodulierte DIBH-Strahlentherapie/volumenmodulierte Strahlentherapie mit Rotation des Bestrahlungsarms (''volumetric-modulated arc therapy'', VMAT) der Lunge mit ausreichender Genauigkeit innerhalb eines klinisch akzeptablen Zeitfensters angewendet werden koennen. Die Bestrahlungsplaene von 34 Patienten mit Bronchialkarzinomen wurden ausgewertet. Von diesen Patienten erhielten 17 eine computergesteuerte SBRT mit schneller DIBH und einer Dosis von 60 Gy (5 Fraktionen a 12 Gy oder 12 Fraktionen a 5 Gy) in FFF-VMAT-Technik (FFF-SBRT) jeden 2. Tag, und 17 erhielten eine konventionelle VMAT mit Ausgleichskoerper (conv-VMAT) und taeglichen Teildosen von 2 Gy (kumulative Dosis: 50-70 Gy). Fuer Plaene mit FFF-SBRT waren mehr Ueberwachungseinheiten (''monitor units'', MU) erforderlich als fuer Plaene mit con-VMAT (2956,6 ± 885,3 MU fuer 12 Gy/Fraktion bzw. 1148,7 ± 289,2 MU fuer 5 Gy/Fraktion vs. 608,4 ± 157,5 MU fuer 2 Gy/Fraktion). Die Dauer der Gesamttherapie und der Beam-on-Zeit (''Strahl ein'') waren fuer FFF-SBRT-Plaene kuerzer

Feasibility study for new ecolabels according to ISO 14024 (type I) within the product group: small cogeneration plants; Machbarkeitsstudie fuer neue Umweltzeichen in Anlehnung an ISO 14024 (Type I) fuer die Produktgruppe: Kleine Blockheizkraftwerk-Module

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, E.; Hirschl, B.; Kaliske, J. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany); Reese, I.; Grimpe, T. [Hamburg Gas Consult (HGC) GmbH (Germany)

2000-11-02

available data, it is not possible at the moment to derive concrete criteria for an ecolabel in this field. After the introduction of initial products onto the market, corresponding requirements for plants based on this new technology should be specified. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer kleine BHKW-Module gerechtfertigt ist, und welche Anforderungen diese im Vergabefall erfuellen sollten. Im Rahmen der Untersuchung wurde zunaechst eine umfassende Marktanalyse durchgefuehrt, um daraus die Anlagen zu identifizieren, die fuer ein Umweltzeichen in Frage kommen. Im Hauptteil der Studie ging es um die vertiefende Analyse der Umweltrelevanz der ausgewaehlten Anlagen. Hierzu wurde eine Herstellerbefragung durchgefuehrt und ausgeaehlte BHKW anhand eines Systemvergleiches mit Gas- und Oelheizkesseln verglichen. Auf der Basis dieser Analyse wurden Anforderungskataloge fuer Gas- und Diesel-BHKW-Module abgeleitet, die in einem Fachgespraech in einer breiten Runde von Experten und Herstellern vorgestellt und diskutiert wurden. Aus der Studie und dem Fachgespraech konnte ein deutliches Votum fuer ein Umweltzeichen fuer die untersuchten BHWK-Module abgeleitet werden. Die vorgeschlagenen Vergabegrundlagen umfassen Anforderungen an Richtlinienkonformitaet, rationelle Energienutzung (Elektrischer und Gesamtwirkungsgrad bei Nennlast und Teillast, Angabe des Hilfsstrombedarfes), Emissionswerte von CO, NO{sub x}, Staub und organischen Stoffen, Schallemissionen, Angebot von Wartungsvertraegen, Ruecknahmeverpflichtung sowie Anforderungen an die Bedienungsanleitung. Als moegliche Umschrift eines Zeichens fuer kleine BHKW-Module wird empfohlen: 'Umweltzeichen... weil energieefizient'. Neben motorischen BHKW wurden auch kleine Brennstoffzellen-BHKW untersucht. Diese befinden sich zur Zeit noch in einer Feldtest- und Erprobungsphase. Sie weisen deutliche oekologische

Development of a VME and CAMAC based data acquisition and transfer system for JT-60 control

International Nuclear Information System (INIS)

Totsuka, Toshiyuki

1993-08-01

Development of a VME and CAMAC based data acquisition and transfer system for JT-60 Control is reported. The present data acquisition and transfer system in JT-60 control is basically composed of CAMAC devices. Since the system equipped with 16-bit microcomputers was manufactured more than ten years ago, the performance and program development environment of the system are apparently worse than those of modern 32-bit microcomputers. To improve these disadvantages, a new data acquisition and transfer system using VME-based 32-bit microcomputers and CAMAC drivers is under design. Corresponding to this design, a CAMAC handler, which runs on the microcomputer, for the VME based CAMAC driver was newly developed. Moreover, the functions of the driver and data transfer performance of the VME and CAMAC complex system were tested. The test results shown that the VME based microcomputer and CAMAC serial driver can be applied for the fast and reliable acquisition and transfer system for JT-60 control. (author)

Prototype VME data acquisition card for the ZEUS calorimeter

International Nuclear Information System (INIS)

Dawson, J.W.; Berg, J.S.; Schlereth, J.L.; Stanek, R.

1988-01-01

This paper discusses the design of a prototype data acquisition (DAQ) card for the ZEUS calorimeter. The card accepts two multiplexes analog data streams at a 1 MHz rate, and digitizes and stores the data for subsequent transfer through VME to a host computer. The data is buffered by a high-speed asynchronous FIFO following the A/D converters, and written into Data Memory on the card, either directly or after processing by an on-board digital signal processor (DSP). Each card has a 16-bit control-status register (CSR), the bits of which configure the hardware and define the hardware options. The 1/4 Mbyte of high speed CMOS static RAM appears either as a FIFO, or mapped memory depending upon a bit in the CSR. The card is designed to make use of the 32-bit data and address buses supported by VME, and accordingly can be most efficiently utilized in conjunction with a processor in the VME environment such as the 68020, which supports longword transfers in a 32-bit address space. The card is constructed on a ten layer printed circuit, with almost all components being surface-mount devices. All logic is implemented in PLD's. 5 refs., 4 figs., 3 tabs

A VME-based accumulation, control and supervising system for neutron texture measurements

International Nuclear Information System (INIS)

Kirilov, A.S.; Heinitz, J.; Korobchenko, M.L.; Rezaev, V.E.; Sirotin, A.P.

1997-01-01

Nowadays VME-based systems to control neutron measurement instruments are forcing out those built with PC and CAMAC. One of several alternative solutions is presented here. Its main feature is the implementation of the entire system on the VME site. Both the hardware and the software parts are considered. The instrument can be controlled locally or remotely via local network (even from PCs) with a modern-styled graphical user interface

Industry Pack Modules in Beam Instrumentation Applications

CERN Document Server

Bravin, Enrico; CERN. Geneva. SPS and LEP Division

1997-01-01

In order to improve the performances of the VME based data acquisition systems new technologies coming up on the market have been investigated in the last few years. The IP-BUS developed by Green Spring computers has been adopted in several applications. By using intelligent carrier boards (the existing are based on the 680x0 CPU family) it is possible to build embedded systems and group them together in the same crate. This solution improves the potentialities of VME by lowering the load of data flow over the bus. Only preprocessed data is exchanged between the different embedded modules. The IP modules also offer a cheap solution for normal VME implementations using passive carrier boards. In this paper we describe our experience so far by describing the use we make of these new products and the problems we encountered on the way

Portable software for distributed readout controllers and event builders in FASTBUS and VME

International Nuclear Information System (INIS)

Pordes, R.; Berg, D.; Berman, E.; Bernett, M.; Brown, D.; Constanta-Fanourakis, P.; Dorries, T.; Haire, M.; Joshi, U.; Kaczar, K.; Mackinnon, B.; Moore, C.; Nicinski, T.; Oleynik, G.; Petravick, D.; Sergey, G.; Slimmer, D.; Streets, J.; Votava, M.; White, V.

1989-12-01

We report on software developed as part of the PAN-DA system to support the functions of front end readout controllers and event builders in multiprocessor, multilevel, distributed data acquisition systems. For the next generation data acquisition system we have undertaken to design and implement software tools that are easily transportable to new modules. The first implementation of this software is for Motorola 68K series processor boards in FASTBUS and VME and will be used in the Fermilab accelerator run at the beginning of 1990. We use a Real Time Kernel Operating System. The software provides general connectivity tools for control, diagnosis and monitoring. 17 refs., 7 figs

Multi-processor network implementations in Multibus II and VME

International Nuclear Information System (INIS)

Briegel, C.

1992-01-01

ACNET (Fermilab Accelerator Controls Network), a proprietary network protocol, is implemented in a multi-processor configuration for both Multibus II and VME. The implementations are contrasted by the bus protocol and software design goals. The Multibus II implementation provides for multiple processors running a duplicate set of tasks on each processor. For a network connected task, messages are distributed by a network round-robin scheduler. Further, messages can be stopped, continued, or re-routed for each task by user-callable commands. The VME implementation provides for multiple processors running one task across all processors. The process can either be fixed to a particular processor or dynamically allocated to an available processor depending on the scheduling algorithm of the multi-processing operating system. (author)

VME applications to the Daresbury SRS control system

International Nuclear Information System (INIS)

Martlew, B.G.; McCarthy, M.; Rawlinson, W.R.

1992-01-01

The control system for the Daresbury SRS has recently been extended with a VME based alarm system which is operational. A further development is a steering system to provide servo control of the electron beam orbit position in the storage ring. (author)

Municipal energy concepts. A service task for electric utility companies; Kommunale Energiekonzepte. Eine Dienstleistungsaufgabe fuer Energieversorgungsuntemehmen

Energy Technology Data Exchange (ETDEWEB)

Just, W. [Stadtwerke Gelsenkirchen GmbH (Germany)

1994-11-01

The article explains to what extent suitable measures can be realized and supported in a municipality with municipal energy concepts or even climate protection concepts. The target is to attain with limited financial means the most favourable economic and ecological effects in the municipality or in the region. Many electric utilities have in the last years forced the realization of energy conservation measures and have become energy service companies. With their expert knowledge they are ideal partners for politics, public adminstration and citizens. They have the best qualificatons for the development and realization of municipal concepts. In many cases it shows that with detailed studies the target can be quicker and more effectively attained as with extensive, time-consuming and expensive studies which are not particularly realization-oriented. The report is to give examples which might be helpful for the development of a concept. (orig./UA) [Deutsch] Der Beitrag erlaeutert, inwieweit umfangreiche kommunale Energiekonzepte oder sogar Klimaschutzkonzepte geeignete Massnahmen in der Kommune realisieren und foerdern koennen. Ziel sollte sein, mit begrenztem Mitteleinsatz die oekonomisch-oekologisch groessten Effekte in der Kommune bzw. in der Region zu erzielen. Viele Energie-Versorgungsunternehmen haben in den letzten Jahren die Realisierung von Energieparmassnahmen vorangetrieben und sich zu Energie-Dienstleistungsunternehmen entwickelt. Mit ihrer Sachkompetenz sind sie der ideale Partner fuer Politik, oeffentliche Verwaltung und Buerger/innen. Sie bringen die besten Voraussetzungen mit bei der Erarbeitung und Umsetzung von kommunalen Konzepten. Vielfach zeigt sich, dass Detailkonzepte schneller und wirkungsvoller zum Ziel fuehren, als umfachreiche, zeitaufwendige und teure Studien, die wenig umsetzungsorientiert sind. Die nachfolgenden Ausfuehrungen sind als Beispiele gedacht. Sie koennen Anregungen fuer die Erstellung eines Konzeptes vermitteln. (orig./UA)

Evaluation and development of soil values for the pathway 'soil to plant'. Transfer factors soil to plant; Ueberpruefung und Fortentwicklung der Bodenwerte fuer den Boden-Pflanze-Pfad. Teilbericht 1: Transferfaktoren Boden-Pflanze

Energy Technology Data Exchange (ETDEWEB)

Trapp, S.; Matthies, M.; Reiter, B.; Gaeth, S.

2001-10-01

. Aufnahme aus der Bodenloesung und Translokation mit den Pflanzensaeften spielt - ausser fuer Phenanthren - kaum eine Rolle. Bei den untersuchten Moehren und Kartoffeln ist vorwiegend die Schale kontaminiert. Die Transferfaktoren der PCB sind durchweg hoeher als die der PAK. Es wird vermutet, dass dafuer der photolytische Abbau von PAK auf Blattoberflaechen verantwortlich ist. Des Weiteren gibt es Hinweise darauf, dass die Metabolisierung von PAK in Pflanzen schneller ablaeuft als die der PCB. (orig.)

A tailored 200 parameter VME based data acquisition system for IBA at the Lund Ion Beam Analysis Facility – Hardware and software

International Nuclear Information System (INIS)

Elfman, Mikael; Ros, Linus; Kristiansson, Per; Nilsson, E.J. Charlotta; Pallon, Jan

2016-01-01

With the recent advances towards modern Ion Beam Analysis (IBA), going from one- or few-parameter detector systems to multi-parameter systems, it has been necessary to expand and replace the more than twenty years old CAMAC based system. A new VME multi-parameter (presently up to 200 channels) data acquisition and control system has been developed and implemented at the Lund Ion Beam Analysis Facility (LIBAF). The system is based on the VX-511 Single Board Computer (SBC), acting as master with arbiter functionality and consists of standard VME modules like Analog to Digital Converters (ADC’s), Charge to Digital Converters (QDC’s), Time to Digital Converters (TDC’s), scaler’s, IO-cards, high voltage and waveform units. The modules have been specially selected to support all of the present detector systems in the laboratory, with the option of future expansion. Typically, the detector systems consist of silicon strip detectors, silicon drift detectors and scintillator detectors, for detection of charged particles, X-rays and γ-rays. The data flow of the raw data buffers out from the VME bus to the final storage place on a 16 terabyte network attached storage disc (NAS-disc) is described. The acquisition process, remotely controlled over one of the SBCs ethernet channels, is also discussed. The user interface is written in the Kmax software package, and is used to control the acquisition process as well as for advanced online and offline data analysis through a user-friendly graphical user interface (GUI). In this work the system implementation, layout and performance are presented. The user interface and possibilities for advanced offline analysis are also discussed and illustrated.

A tailored 200 parameter VME based data acquisition system for IBA at the Lund Ion Beam Analysis Facility – Hardware and software

Energy Technology Data Exchange (ETDEWEB)

Elfman, Mikael, E-mail: Mikael.Elfman@nuclear.lu.se; Ros, Linus; Kristiansson, Per; Nilsson, E.J. Charlotta; Pallon, Jan

2016-03-15

With the recent advances towards modern Ion Beam Analysis (IBA), going from one- or few-parameter detector systems to multi-parameter systems, it has been necessary to expand and replace the more than twenty years old CAMAC based system. A new VME multi-parameter (presently up to 200 channels) data acquisition and control system has been developed and implemented at the Lund Ion Beam Analysis Facility (LIBAF). The system is based on the VX-511 Single Board Computer (SBC), acting as master with arbiter functionality and consists of standard VME modules like Analog to Digital Converters (ADC’s), Charge to Digital Converters (QDC’s), Time to Digital Converters (TDC’s), scaler’s, IO-cards, high voltage and waveform units. The modules have been specially selected to support all of the present detector systems in the laboratory, with the option of future expansion. Typically, the detector systems consist of silicon strip detectors, silicon drift detectors and scintillator detectors, for detection of charged particles, X-rays and γ-rays. The data flow of the raw data buffers out from the VME bus to the final storage place on a 16 terabyte network attached storage disc (NAS-disc) is described. The acquisition process, remotely controlled over one of the SBCs ethernet channels, is also discussed. The user interface is written in the Kmax software package, and is used to control the acquisition process as well as for advanced online and offline data analysis through a user-friendly graphical user interface (GUI). In this work the system implementation, layout and performance are presented. The user interface and possibilities for advanced offline analysis are also discussed and illustrated.

The UA1 VME data acquisition system

International Nuclear Information System (INIS)

Cittolin, S.

1988-01-01

The data acquisition system of a large-scale experiment such as UA1, running at the CERN proton-antiproton collider, has to cope with very high data rates and to perform sophisticated triggering and filtering in order to analyze interesting events. These functions are performed by a variety of programmable units organized in a parallel multiprocessor system whose central architecture is based on the industry-standard VME/VMXbus. (orig.)

A VME based cryogenic data acquisition and control system (CRYO-DACS)

International Nuclear Information System (INIS)

Antony, Joby; Rajkumar; Datta, T.S.

2005-01-01

This report describes a newly developed VME based data acquisition and control system named CRYO-DACS for acquiring and controlling various analog and digital cryogenic parameters from equipment's like beam-line cryostats, Helium compressors, liquefier, cryogenic distribution line etc. A new central control room has been set-up for the remote controls and monitoring. The system monitors various analog parameters like temperature, pressure, vacuum and cryogenic fluid levels inside the cryostats and performs closed loop controls of cryogen valves. The hardware architecture of CRYO-DACS is multi-crate distributed VME, all linked by workstation clients in 100 Mb/s LAN for distributed logging, historical trending, analysis, alarm management and control GUIs. (author)

A programmable finite state module for use with the Fermilab Tevatron Clock

International Nuclear Information System (INIS)

Beechy, D.

1987-10-01

A VME module has been designed which implements several programmable finite state machines that use the Tevatron Clock signal as inputs. In addition to normal finite state machine type outputs, the module, called the VME Finite State Machine, or VFSM, records a history of changes of state so that the exact path through the state diagram can be determined. There is also provision for triggering and recording from an external digitizer so that samples can be taken and recorded under very precisely defined circumstances

A 64 Mbyte VME histogramming memory card for the GA.SP gamma spectrometer

International Nuclear Information System (INIS)

Cavedini, Z.; DePoli, M.; Maron, G.; Vedovato, G.

1990-01-01

This paper reports on a 64 Mbyte VME histogramming memory card designed and built to cover the on-line and off-line data analysis needs of the GA.SP spectrometer (a 40 HpGe gamma detector array in development at LNL). The card combines the standard features of the VME/VSB bus with some special built-in functions: single cycle fast histogramming operations (typical channel increment time of 550 ns including the bus arbitration), fast clear of the whole memory (∼1 second to erase 64 Mbyte) and data broadcasting

A new VME-based high voltage power supply for large photomultiplier systems

International Nuclear Information System (INIS)

Neumaier, S.; Hubbeling, T.; Kolb, B.W.; Purschke, M.L.; Ippolitov, M.; Blume, C.; Bohne, E.M.; Bucher, D.; Claussen, A.; Peitzmann, T.; Schepers, G.; Schlagheck, H.

1995-01-01

We describe a new high voltage power supply, developed for the leadglass calorimeter of the WA98 experiment at CERN. The high voltage is produced for each of the 10,080 photomultiplier tubes of the detector individually, by the same number of active bases with on-board Greinacher voltage multipliers. The full VME-based HV controller system, which addresses each base via bus cables once per second, is miniaturized and fits into a single VME crate. The main advantages of this approach are the low heat dissipation, the considerably reduced amount of cabling and cost, as well as the high stability and low noise of the system. (orig.)

Software for Data Acquisition AMC Module with PCI Express Interface

CERN Document Server

Szachowalow, S; Makowski, D; Butkowski, L

2010-01-01

Free Electron Laser in Hamburg (FLASH) and XRay Free Electron Laser (XFEL) are linear accelerators that require a complex and accurate Low Level Radio Frequency (LLRF) control system. Currently working systems are based on aged Versa Module Eurocard (VME) architecture. One of the alternatives for the VME bus is the Advanced Telecommunications and Computing Architecture (ATCA) standard. The ATCA based LLRF controller mainly consists of a few ATCA carrier boards and several Advanced Mezzanine Cards (AMC). AMC modules are available in variety of functions such as: ADC, DAC, data storage, data links and even CPU cards. This paper focuses on the software that allows user to collect and plot the data from commercially available TAMC900 board.

FPGA based VME boards for Indus-2 timing control system

International Nuclear Information System (INIS)

Lulani, Nitin; Barpande, K.; Fatnani, P.; Sheth, Y.

2009-01-01

FPGA based two VME boards are developed and deployed recently for Indus-2 timing control system at RRCAT Indore. New FPGA based 5-channel programmable (Coarse-Fine) delay generator board has replaced three 2-channel coarse and one 4-channel fine existing delay generator boards. Introduction of this board has improved the fine delay resolution (to 0.5ns) as well as channel to channel jitter (to 0.8ns) of the system. It has also improved the coarse delay resolution from previous 33ns to 8ns with the possibility to work at divided Indus-2 RF clock. These improved parameters have resulted in better injection rate of beam. Old coincidence generator board is also replaced with FPGA based newly developed Coincidence clock generator VME board, which has resulted in successful controlled filling of beam (single, multi and 3-symmetrical bucket filling) in Indus-2. Three more existing boards will be replaced by single FPGA based delay generator card in near future. This paper presents the design, test results and features of new boards. (author)

VME bus based microcomputer system boards

International Nuclear Information System (INIS)

Chandra, A.K.; Ganesh, G.; Mayya, Anuradha; Chachondia, A.S.; Premraj, M.K.

1991-01-01

Several operator information systems for nuclear plants has been developed in the Division and these have involved extensive use of microcomputer boards for achieving various functions. Standard VME bus based boards have been developed to provide the most used functions. These boards have been fabricated and tested and used in several systems including Channel Temperature Monitoring systems, Disturbance Recording Systems etc. and are also proposed to be used in additional systems under developement. The use of standard bus and boards provides considerable savings in engineering time, prototyping, testing and evaluation costs, and maintenance support. This report desribes the various boards developed and the functions available on each. (author). 4 refs., 11 figs., 3 appendixes

Comparative VME Performance Tests for MEN A20 Intel-L865 and RIO-3 PPC-LynxOS platforms

CERN Document Server

Andersen, M; CERN. Geneva. BE Department

2009-01-01

This benchmark note presents test results from reading values over VME using different methods and different sizes of data registers, running on two different platforms Intel-L865 and PPC-LynxOS. We find that the PowerPC is a factor 3 faster in accessing an array of contiguous VME memory locations. Block transfer and DMA read accesses are also tested and compared with conventional single access reads.

Use of VME computers for the data acquisition system of the PHOENICS experiment

International Nuclear Information System (INIS)

Zucht, B.

1989-10-01

The data acquisition program PHON (PHOENICS ONLINE) for the PHOENICS-experiment at the stretcher ring ELSA in Bonn is described. PHON is based on a fast parallel CAMAC readout with special VME-front-end-processors (VIP) and a VAX computer, allowing comfortable control and programming. Special tools have been developed to facilitate the implementation of user programs. The PHON-compiler allows to specify the arrangement of the CAMAC-modules to be read out for each event (camaclist) using a simple language. The camaclist is translated in 68000 Assembly and runs on the front-end-processors, making high data rates possible. User programs for monitoring and control of the experiment normally require low data rates and therefore run on the VAX computer. CAMAC operations are supported by the PHON CAMAC-Library. For graphic representation of the data the CERN standard program libraries HBOOK and PAW are used. The data acquisition system is very flexible and can be easily adapted to different experiments. (orig.)

Data collection modules for the PHENIX experiment

International Nuclear Information System (INIS)

Chi, C.Y.; Cole, B.; Nagle, J.L.; Sippach, W.; Zajc, W.A.

1998-01-01

The data acquisition (DAQ) system for the PHENIX experiment is designed as a pipeline system with simultaneous triggering and readout. The maximum average level-1 (LVL1) trigger rate is 25 KHz. The DAQ system consists of Front-End Modules (FEM's), a level-1 (LVL1) trigger, data collection modules (DCM's) timing systems, slow controllers and an event builder (EVB). The data collection modules have the responsibility of collecting uncompressed LVL1 trigger event fragments from the FEM's. The DCM's provide buffering for up to five LVL1 events. The DCM's also perform zero suppression, error checking, data reformatting and outputting data to the event builder. In addition to the FEM data, the DCM's also receive primitives from LVL1 trigger system. These primitives are used for alignment checking on the FEM data packet. Additional trigger primitives can also be generated together with the FEM data. The DCM is hosted in a VME crate. VME is used as a means for maintenance and slow control. Data collection within the crate is done through a private data-way

Integrated FASTBUS, VME and CAMAC diagnostic software at Fermilab

International Nuclear Information System (INIS)

Anderson, J.; Forster, R.; Franzen, J.; Wilcer, N.

1992-10-01

A fully integrated system for the diagnosis and repair of data acquisition hardware in FASTBUS, VME and CAMAC is described. A short cost/benefit analysis of using a distributed network of personal computers for diagnosis is presented. The SPUDS (Single Platform Uniting Diagnostic Software) software package developed at Fermilab by the authors is introduced. Examples of how SPUDS is currently used in the Fermilab equipment repair facility, as an evaluation tool and for field diagnostics are given

Aluminum or steel? Mounting systems for solar generators - a practice report; Aluminium oder Stahl? Montagesysteme fuer Solargeneratoren - ein Praxisreport

Energy Technology Data Exchange (ETDEWEB)

Schnitzer, Sandy [Mounting Systems GmbH, Rangsdorf (Germany); Hannemann, Lydia

2013-10-01

Mounting systems for solar generators must be solid and reliable as long as possible so that they carry the modules. Which material is best? [German] Montagesysteme fuer Solargeneratoren muessen solide sein, damit sie moeglichst lange und zuverlaessig die Module tragen.

A system level boundary scan controller board for VME applications [to CERN experiments

CERN Document Server

Cardoso, N; Da Silva, J C

2000-01-01

This work is the result of a collaboration between INESC and LIP in the CMS experiment being conducted at CERN. The collaboration addresses the application of boundary scan test at system level namely the development of a VME boundary scan controller (BSC) board prototype and the corresponding software. This prototype uses the MTM bus existing in the VME64* backplane to apply the 1149.1 test vectors to a system composed of nineteen boards, called here units under test (UUTs). A top-down approach is used to describe our work. The paper begins with some insights about the experiment being conducted at CERN, proceed with system level considerations concerning our work and with some details about the BSC board. The results obtained so far and the proposed work is reviewed in the end of this contribution. (11 refs).

Flexible programmable logic module

Science.gov (United States)

Robertson, Perry J.; Hutchinson, Robert L.; Pierson, Lyndon G.

2001-01-01

The circuit module of this invention is a VME board containing a plurality of programmable logic devices (PLDs), a controlled impedance clock tree, and interconnecting buses. The PLDs are arranged to permit systolic processing of a problem by offering wide data buses and a plurality of processing nodes. The board contains a clock reference and clock distribution tree that can drive each of the PLDs with two critically timed clock references. External clock references can be used to drive additional circuit modules all operating from the same synchronous clock reference.

Development of process technology for large-area thin-film solar modules based on compound semiconductors. Final report; Entwicklung der technologischen Grundlagen fuer grosse Photovoltaikmodule auf Basis von Duennschicht-Verbindungshalbleitern. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Maurus, H.; Lechner, P.; Geyer, R.; Ruebel, H.; Schade, H.; Psyk, W.; Frammelsberger, W.; Berthold, W.; Eichner, C.; Heckel, E.; Huber, R.; Labudde-Eibl, H.; Raith, S.; Schenk, B.; Ullrich, H.

1998-06-01

A cooperative effort of the Center for Solar Energy and Hydrogen Research (ZSW) and Phototronics Solartechnik GmbH (PST) aimed at the transfer of highly efficient solar cells developed on a laboratory scale, to large-area thin-film solar modules suitable for production. This work was based on research and development at the Institute for Physical Electronics (IPE) of Stuttgart University and ZSW on one hand, and on the know-how of PST in regard to large-area module fabrication on the other hand. The various thin-film layers of the cells and modules comprize molybdenum as rear contact, copper-indium(gallium)-diselenide (CIGS) as absorber material, the combination of cadmium sulphide (CdS) and ZnO as window layer. To produce these layers on large areas (30x30 cm{sup 2}), equipment was constructed and procedures were developed. Monolithic series connection of cells, used in other thin-film technologies, was studied and optimized by suitable patterning procedures, such as laser-scribing, mechanical scribing or lift-off techniques. Central to the PST efforts was the large-area deposition of Mo followed by patterning for the monolithic series connection, and furthermore important contributions in regard to the ZnO window layer as well as aspects of the module technology. The latter include film removal along the module edges, contacting and cable attachment, lamination, module measurements and temperature/humidity tests. The main goal, namely the basic development of equipment and procedures to fabricate large-area (30x30 cm{sup 2}) modules with an efficiency of 10-12%, was reached (best module with 11.7% efficiency referenced to the aperature area). (orig.) [Deutsch] Um die im Labormassstab entwickelten hocheffizienten Solarzellen in industriell relevante grossflaechige Duennschichtmodule umzusetzen, arbeiteten das Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung (ZSW) Baden-Wuerttemberg und die Phototronics Solartechnik GmbH (PST) zusammen. Ausgangsbasis waren

PC-based input/output controllers from a VME perspective

International Nuclear Information System (INIS)

Hill, J.O.

1999-01-01

The Experimental Physics and Industrial Control System (EPICS) has been widely adopted in the accelerator community. Although EPICS is available on many platforms, the majority of sites have deployed VME- or VXI-based input output controllers running the vxWorks real time operating system. Recently, a hybrid approach using vxWorks on both PC and traditional platforms is being implemented at LANL. To illustrate these developments the author compares his recent experience deploying PC-based EPICS input output controllers with experience deploying similar systems based on traditional EPICS platforms

Development of a new discharge control system utilizing UNIX workstations and VME-bus systems for JT-60

Energy Technology Data Exchange (ETDEWEB)

Akasaka, Hiromi; Sueoka, Michiharu; Takano, Shoji; Totsuka, Toshiyuki; Yonekawa, Izuru; Kurihara, Kenichi; Kimura, Toyoaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

2002-01-01

The JT-60 discharge control system, which had used HIDIC-80E 16 bit mini-computers and CAMAC systems since the start of JT-60 experiment in 1985, was renewed in March, 2001. The new system consists of a UNIX workstation and a VME-bus system, and features a distributed control system. The workstation performs message communication with a VME-bus system and controllers of JT-60 sub-systems and processing for discharge control because of its flexibility to construction of a new network and modifications of software. The VME-bus system performs discharge sequence control because it is suitable for fast real time control and flexible to the hardware extension. The replacement has improved the control function and reliability of the discharge control system and also has provided sufficient performance necessary for future modifications of JT-60. The new system has been running successfully since April 2001. The data acquisition speed was confirmed to be twice faster than the previous one. This report describes major functions of the discharge control system, technical ideas for developing the system and results of the initial operation in detail. (author)

VME data acquisition system. Interactive software for the acquisition, display and storage of one or two dimensional spectra

International Nuclear Information System (INIS)

Petremann, E.

1989-01-01

The development and construction of a complete data acquisition system for nuclear physics applications, are described. The system is based on the VME bus and the 16/32 bits microprocessor. The data acquisition system enables the obtention of line spectra, involving one or two parameters, and the simultaneous storage of events in a magnetic tape. The analysis and the description of the data acquisition software, the experimental spectra display and saving on magnetic systems are given. Pascal and Assembler are used. The development of cards, for the standard VME and electronic equipment interfaces, is performed [fr

GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Annual report 1995; GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Jahresbericht 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The 1995 annual report of the Institute of Hydrology presents the findings of 19 current research projects on different subjects in hydrology. It is supplemented by information on cooperation with other scientific institutions in the form of lists of publications and reports, lectures and posters, university teaching projects, and finished and current dissertations. (VHE) [Deutsch] Der Jahresbericht 1995 des Institutes fuer Hydrologie im GSF-Forschungszentrum fuer Umwelt und Gesundheit stellt die Ergebnisse von derzeit 19 laufenden Untersuchungen zu unterschiedlichen hydrologischen Themen vor. Ergaenzt werden die Ausfuehrungen durch einen Ueberblick ueber die Zusammenarbeit mit anderen wissenschaftlichen Institutionen in Form von Verzeichnissen der Veroeffentlichungen und Berichte, der Vortraege und Poster, der Beitraege zur Lehre an Hochschulen sowie der abgeschlossenen und laufenden Dissertationen. (VHE)

Trigger Timing Module for SVD2 upgrade at Belle

International Nuclear Information System (INIS)

Chang, M.C.; Gao, Z.W.; Guo, Y.N.; Kawasaki, T.; Ueno, K.; Velikzhanin, Y.S.

2003-01-01

We have developed a Trigger Timing Module (TTM2) for the control and readout electronics (CORE) of the upgraded Silicon Vertex Detector (SVD2) for use in the BELLE experiment. Eleven Trigger Timing Modules located at one VME-crate provide timing and strobe signals for the SVD2 CORE electronics and make communication between SVD2 and Global Decision Logic of the BELLE data acquisition system. The main motivation to make a new TTM design is to avoid glitches

Final Report and Documentation for the PLD11 Multipurpose Programmable Logic VME Board Design

International Nuclear Information System (INIS)

Hutchinson, Robert L.; Pierson, Lyndon G.; Robertson, Perry J.; Tarman, Thomas D.; Witzke, Edward L.

1999-01-01

The PLD11 board is a 9U VME board containing 11 Altera 10K100 Programmable Logic Devices, controlled impedance clock tree, VME interface, programming inteface, 0C3 (155 Mbps) interface and serial port. The 11 Altera 10K100 Programmable Logic Devices arranged to provide four 96 bit wide buses for a total of 384 parallel digital data lines in and out of the board that can operate up to 100 Mhz for a aggrigate throughput of 38.4 Gpbs. The 14.44'' X 15.75'' board has over 1.1 million programmable gates that can be programmed through a serial interace. The board contains a clock reference and 50 ohm clock distribution tree that can drive each of the eleven 10K100 devices with two critically timed clock references. Five external clock references can be used to drive five additional PLD 11 boards for a total of six boards operating all from the same synchronous clock reference. A system of six boards provides just under 7 million programmable gates

Integrated information system MBS as a basis for fuel management in conventional power stations; Integriertes Informationssystem MBS als Basis fuer das Brennstoffmanagement in konventionellen Kraftwerken

Energy Technology Data Exchange (ETDEWEB)

Sasko, P.; Lindemann, H.; Kern, H.

2000-07-01

The fuel cost is a key factor in fossil-fuel power stations, and optimisation of fuel use is an urgent task. Modul Brennstoffe MBS supports all processes relevant for fuel supply and waste management, i.e. projecting, acquisition, optimisation of operation, billing, and evaluation. [German] Die gegenwaertige Situation in der Energiewirtschaft und im liberalisierten Energiemarkt hat zu einem nachhaltigen Kostendruck auf der Seite der Erzeugung gefuehrt. Die Brennstoffkosten in den fossil befeuerten Kraftwerken stellen eine wesentliche Komponente der Erzeugungskosten dar. Vor diesem Hintergrund hat die Optimierung des Brennstoffeinsatzes eine grundsaetzliche Bedeutung gewonnen. Modul Brennstoffe MBS unterstuetzt alle fuer die Brennstoffversorgung und fuer die Entsorgung von konventionellen Kraftwerken relevanten Geschaeftsprozesse. Es umfasst die Geschaeftsvorgaenge Planung, Beschaffung, Einsatzoptimierung, Abrechnung und Auswertung. Die Geschaeftsprozesse sind informationstechnisch im Modul Brennstoffe in einem integrierten System abgebildet. (orig.)

A High-Performance VME-Based Acquisition System for Positron Emission Mammography

International Nuclear Information System (INIS)

Abbott, D.J.; Weisenberger, A.; Majewski, S.; Kieper, D.; Kross, B.; Popov, V.; Wojcik, R.; Raylman, R.R.

2001-01-01

A prototype for a practical and economical breast imaging system for cancer detection is currently under development at Jefferson Lab. The latest advances in bright, fast, crystal scintillators, compact position-sensitive photomultipliers (PSPMT), and high-performance digitizing and readout electronics are being used to develop a compact imager based on Positron Emission Tomography (PET). To facilitate the performance demands of the detector as well as the high number of readout channels, the data acquisition system is built around an intelligent, self-contained, VME form-factor

The NERA-PR instrument control software: experience of using the VME-PCI adapter

International Nuclear Information System (INIS)

Kirilov, A.S.; Astakhova, N.V.; Murashkevich, S.M.; Petukhova, T.B.; Yudin, V.E.

2003-01-01

The intermediate results for modernization of the control system for the NERA-PR instrument on the base of a VME-PCI adapter are considered. The article is mostly devoted to the software of the new system. The structure, the new user interface and the method for remote control are described. A half-year testing showed that the new system is reliable and is attractive for users. (author)

Controlling applied to information processing: quality management applied to IP projects and IP services; Informationsverarbeitungs-Controlling: Qualitaetsmanagement fuer IV-Projekte und fuer IV-Service

Energy Technology Data Exchange (ETDEWEB)

Becker, B. [Vereinigung Deutscher Elektrizitaetswerke e.V. (VDEW), Frankfurt am Main (Germany); Beckers, F. [Isar-Amperwerke AG, Muenchen (Germany); Dewald, N. [Bayernwerk AG, Muenchen (Germany); Hauffe, P. [Pfalzwerke AG, Ludwigshafen am Rhein (Germany); Hein, F. [EVS AG Stuttgart (Germany); Hoederath, M. [Vereinigte Elektrizitaetswerke Westfalen AG (VEW), Dortmund (Germany); Seyen, R. [Staedtische Werke Nuernberg GmbH (Germany)

1998-01-12

The working group on information processing (IP) basics (in German: `IV-Grundlagen`) has prepared this contribution dealing with controlling applied to information processing. This new report, on the one hand, takes into consideration the role of the organizational IP unit as one offering its services to all sections of a company. On the other hand, information processing as an operational infrastructure influencing all business processes becomes increasingly important with respect to the competitiveness of the EVU. Therefore, quality management applied to IP projects and IP services must support this development. (orig./RHM) [Deutsch] Der VDEW Arbeitskreis `IV-Grundlagen` hat einen Beitrag zum Controlling fuer die Informationsverarbeitung erstellt. Hier geht zum einen die Rolle der Organisationseinheit IV als Dienstleister fuer alle Unternehmensbereiche ein. Zum anderen gewinnt die Informationsverarbeitung als betriebliche Infrastruktur fuer alle Geschaeftsprozesse zunehmende Bedeutung fuer die Wettbewerbsfaehigkeit der EVU. Das Qualitaetsmanagement fuer IV-Projekte und fuer IV-Service muss dies unterstuetzen. (orig./RHM)

A new VME based high voltage power supply for large experiments

Energy Technology Data Exchange (ETDEWEB)

Ahn, S.C.; Angstadt, R.D.; Droege, T.F.; Johnson, M.E.; MacKinnon, B.A.; McNulty, S.E.; Shea, M.F.; Thompson, R.N.; Watson, M.M. (Fermi National Accelerator Lab., Batavia, IL (United States)); Franzini, P. (Columbia Univ., New York, NY (United States)); Jones, A.A. (Superconducting Super Collider Lab., Dallas, TX (United States)); Lopez, M.L. (La Plata Univ. Nacional (Argentina)); Wimpenny, S.J.; Yang, M.J

1991-11-01

A new VME based high voltage power supply has been developed for the D{O} experiment at Fermilab. There are three types of supplies delivering up to {plus minus}5.6 kV at 1.0 mA or +2.0 kV at 3.0 mA with a set accuracy of 1.5 V and extremely low voltage ripples. Complete computer control has allowed many special features to be developed for the supply, including user-defined control land monitor groups, variable ramp rates, and advanced histogram and graphic functions. 3 refs.

A new VME based high voltage power supply for large experiments

International Nuclear Information System (INIS)

Ahn, S.C.; Angstadt, R.D.; Droege, T.F.; Johnson, M.E.; MacKinnon, B.A.; McNulty, S.E.; Shea, M.F.; Thompson, R.N.; Watson, M.M.; Franzini, P.; Jones, A.A.; Lopez, M.L.; Wimpenny, S.J.; Yang, M.J.

1991-11-01

A new VME based high voltage power supply has been developed for the D OE experiment at Fermilab. There are three types of supplies delivering up to ±5.6 kV at 1.0 mA or +2.0 kV at 3.0 mA with a set accuracy of 1.5 V and extremely low voltage ripples. Complete computer control has allowed many special features to be developed for the supply, including user-defined control land monitor groups, variable ramp rates, and advanced histogram and graphic functions. 3 refs

A program development tool for KEK VME-MAP control system

International Nuclear Information System (INIS)

Nakagawa, H.; Katoh, T.; Kadokura, E.; Akiyama, A.; Nigorikawa, K.; Ishii, K.

1992-01-01

The control system for KEK 12 GeV Proton Synchrotron has been replaced with a distributed VME-bus based microcomputer system and a MAP local area network. In order to simplify programming for network application tasks, a set of a preprocessor for a PASCAL compiler and a network communication server has been developed. Application programs for accelerator control system have blocks with similar codes; sending, waiting for, receiving, analyzing messages, etc. The preprocessor called 'OBJP' incorporates such common codes into the source code written by an application programmer. In case of a simple program, the size of the source code is reduced by one tenth of a full coding. (author)

PCI-VME bridge device driver design of a high-performance data acquisition and control system on LINUX

International Nuclear Information System (INIS)

Sun Yan; Ye Mei; Zhang Nan; Zhao Jingwei

2000-01-01

Data Acquisition and Control is an important part of Nuclear Electronic and Nuclear Detection application in HEP. The key methods are introduced for designing LINUX Device Driver of PCI-VME Bridge Device based on the realized Data Acquisition and Control System

PCI-VME bridge device driver design of a high-performance data acquisition and control system on LINUX

International Nuclear Information System (INIS)

Sun Yan; Ye Mei; Zhang Nan; Zhao Jingwei

2001-01-01

Data acquisition and control is an important part of nuclear electronic and nuclear detection application in HEP. The key method has been introduced for designing LINUX device driver of PCI-VME bridge device based on realized by authors' data acquisition and control system

Alpine solar power station on Sareiserjoch - application of and sturdiness test on a new plastic mounting system; Alpines Solarkraftwerk Sareiserjoch - Anwendung und Haertetest fuer ein neues Kunststoff-Montagesystem

Energy Technology Data Exchange (ETDEWEB)

Krause, J. [NEWTEC, Plaston AG, Widnau (Switzerland)

1997-12-31

In Malbun in Liechtenstein a grid-connected 22 kW{sub p} PV system has been set up at an altitude of 1900 metres. This system serves its operator as a test of potovoltaics in general and of the mounting systems used in its load-bearing contruction and the fastening of its modules. The present article describes the load-bearing construction and plastic mounting cramp employed. (HW) [Deutsch] Im liechtensteinischen Malbun wurde auf 1900 Metern ueber Meer eine netzgekoppelte 11 kWp-PV-Anlage erstellt, die fuer den Anlagenbetreiber als Test fuer die Photovoltaik im allgemeinen wie auf fuer neue Montagesysteme sowohl bei der Tragkonstruktion als auch bei der Modulbefestigung dienen soll. Tragkonstruktion und Kunststoff-Montageklammer werden dargestellt. (HW)

Investigations of the boundary conditions of acicular ferrite formation in fast-quenched welded materials. Final report; Untersuchungen der Randbedingungen fuer die Bildung von 'acicular ferrite' in Schweissguetern bei schneller Abkuehlung. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Dilthey, U.; Biesenbach, M.

2000-06-19

The authors investigated the boundary conditions in which a fine-grained ferritic needle structure with sufficient low-temperature toughness is obtained in conditions of extreme heating and cooling. Alloy compositions and welding boundary conditions were investigated for laser welding, electron beam welding in a vacuum and electron beam welding at atmospheric pressure. [German] Im Rahmen dieser Arbeit soll untersucht werden, welche Randbedingungen erfuellt sein muessen, damit sich unter extremen Aufheiz- und Abkuehlbedingungen, wie sie bei den Strahlschweissverfahren vorliegen, ein feinkoerniges nadelferritisches Gefuege mit ausreichend hoher Tieftemperaturzaehigkeit bildet. Diesbezueglich ist fuer die Strahlschweissverfahren Laserstrahlschweissen, Elektronenstrahlschweissen im Vakuum und Elektronenstrahlschweissen unter Atmosphaerendruck zu ermitteln, welche Legierungszusammensetzungen diese Voraussetzungen erfuellen und wie sie unter realen Schweissbedingungen verwirklicht werden koennen. (orig.)

Europeanization of the Hospital Markets - Opportunities and Risks for German Hospitals (Europaeisierung des Krankenhausmarkets - Chancen und Risiken fuer deutsche Krankenhaeuser)

Science.gov (United States)

2004-07-06

Information Services Institut (3M HIS Institut) hat u.a. mit der Entwicklung eines Werkzeugs zur Pflege und Weiterentwicklung des deutschen DRG-Systems ftir... Pflege (Krankenhauspflege) a. die Kosten wachsen schneller als allgerneine Inflation b. praktisch stabile Krankenversicherungsentnahme c. es existieren 9...Krankenkassen d. die Pflege ist von der Krankenversicherung voll (theoretisch) vergUltet e. Missverhlitnis zwischen Versicherungsentnuhrne und

Bundesanstalt fuer Strahlenschutz. Annual report 2013; Bundesanstalt fuer Strahlenschutz. Jahresbericht 2013

Energy Technology Data Exchange (ETDEWEB)

Ebermann, Lutz (comp.)

2014-10-01

The annual report 2013 of the Bundesamt fuer Strahlenschutz covers the following issues: from scientific research to preventive consumer protection, actual questions of radiation protection actual challenges in the frame of environmental radiation monitoring; radioactive waste disposal; actual questions on the safety of nuclear technology. The report includes a list of publications.

Multi-Chip-Modul-Entwicklung fuer den ATLAS-Pixeldetektor

CERN Document Server

Stockmanns, Tobias

2004-01-01

Abstract: The innermost layer of the ATLAS tracking system is a silicon pixel detector. The use of radiation tolerant components is mandatory due to the harsh radiation environment. The smallest independent component of the pixel detector is a hybride pixel module consisting of a large oxygen enriched silicon sensor and 16 specifically developed ASICs. To achieve the necessary radiation tolerance the ASICs are produced in a 0.25 µm technology in combination with special design techniques. The measurements of the readout electronics during all stages of production of a full module are presented and the performance of the modules is compared with the strict requirements of the ATLAS pixel detector. Furthermore a new powering scheme for pixel detectors is presented, aiming at reducing the total power consumption, the material for the electrical services and the amount of power cables. The advantages and disadvantages of this concept are discussed on the example of the ATLAS pixel detector with pixel modules mo...

A Dual Digital Signal Processor VME Board for Instrumentation and Control Applications

International Nuclear Information System (INIS)

H. Dong; R. Flood; C. Hovater; J. Musson

2001-01-01

A Dual Digital Signal Processing VME Board is being developed for the CEBAF Beam Current Monitor system at Jefferson Lab. It is a versatile general-purpose digital signal processing board using an open architecture, which allows for adaptation to various applications. The base design uses two independent Texas Instrument (TI) TMS320C6711, which are 900 MFLOPS floating-point digital signal processors (DSP). Applications that require a fixed point DSP can be implemented by replacing the baseline DSP with the pin-for-pin compatible TMS320C6211. Both parallel and serial protocols have been implemented for communicating with off board devices. The initial implementation makes use of TI Multi-channel Serial protocol and VME bus protocol. Other communication protocols can be implemented by reprogramming the FPGA. Each DSP is equipped with FLASH PROM and SDRAM for program and data storage. Additionally, each DSP has 16 bits of digital I/O, two digital analog converters, and two analog to digital converters. Dual 160 pins mezzanine connectors provide expansion capability without design modifications. The mezzanine interface conforms to the TI Expansion Daughter Card Interface standard. The design can be manufactured with a reduced chip set without redesigning the printed circuit board. For example, it can be implemented as a single-channel DSP with no analog I/O. The board supports JTAG 1149 boundary scan to facilitate testing, debugging, and programming. It is fully programmable using software development tools such as TI Code Composer Studio and a JTAG emulator such as Spectrum Digital DS510PP-PLUS. Using these tools allows one program the flash memory and FPGA through the JTAG ports, thus eliminating the need for a separate ROM/FPGA programmer. This work supported by U.S. DOE Contract No. DE-AC05-84ER40150

Scintillation counter and wire chamber front end modules for high energy physics experiments

International Nuclear Information System (INIS)

Baldin, Boris; DalMonte, Lou

2011-01-01

This document describes two front-end modules developed for the proposed MIPP upgrade (P-960) experiment at Fermilab. The scintillation counter module was developed for the Plastic Ball detector time and charge measurements. The module has eight LEMO 00 input connectors terminated with 50 ohms and accepts negative photomultiplier signals in the range 0.25...1000 pC with the maximum input voltage of 4.0 V. Each input has a passive splitter with integration and differentiation times of ∼20 ns. The integrated portion of the signal is digitized at 26.55 MHz by Analog Devices AD9229 12-bit pipelined 4-channel ADC. The differentiated signal is discriminated for time measurement and sent to one of the four TMC304 inputs. The 4-channel TMC304 chip allows high precision time measurement of rising and falling edges with ∼100 ps resolution and has internal digital pipeline. The ADC data is also pipelined which allows deadtime-less operation with trigger decision times of ∼4 (micro)s. The wire chamber module was developed for MIPP EMCal detector charge measurements. The 32-channel digitizer accepts differential analog signals from four 8-channel integrating wire amplifiers. The connection between wire amplifier and digitizer is provided via 26-wire twist-n-flat cable. The wire amplifier integrates input wire current and has sensitivity of 275 mV/pC and the noise level of ∼0.013 pC. The digitizer uses the same 12-bit AD9229 ADC chip as the scintillator counter module. The wire amplifier has a built-in test pulser with a mask register to provide testing of the individual channels. Both modules are implemented as a 6Ux220 mm VME size board with 48-pin power connector. A custom europack (VME) 21-slot crate is developed for housing these front-end modules.

Fibre-reinforced ceramics for vehicle brakes; Faserverstaerkte Keramiken fuer Bremsenanwendungen

Energy Technology Data Exchange (ETDEWEB)

Krenkel, W. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Bauweisen- und Konstruktionsforschung

2000-07-01

In the context of their aerospace research activities, DLR (Deutsches Zentrum fuer Luft- und Raumfahrt) developed a new process for producing ceramic fibre composite materials that are extremely light and tough. Apart from their applications in aerospace engineering, they have great potential for motor brakes with improved friction and wear characteristics. Excellent results were achieved with the new materials even with conventional brake liners. With customised liners, brake life may be prolonged to match the car life. Further applications are expected in trucks for transport in hazardous materials, high-speed trains, aircraft, industrial machinery and plants, and conveyor systems. [German] Im Rahmen der Raumfahrt-Forschung wurde vom Deutschen Zentrum fuer Luft- und Raumfahrt (DLR) das Fluessigsilicier-Verfahren zur Herstellung von keramischen Verbundwerkstoffen entwickelt. Diese extrem leichten und bruchzaehen Faserkeramiken haben sich unter den besonderen Bedingungen des Weltraums beispielsweise fuer Hitzeschutzstrukturen von Raumfahrzeugen hervorragend bewaehrt. Darueber hinaus zeigten Untersuchungen ein hohes Anwendungspotenzial fuer neue Bremsen mit deutlich verbesserten Reibungs- und Verschleisseigenschaften. Weiterentwicklungen des keramischen Gefueges fuehrten zu innovativen Leichtbau- bzw. Hochleistungs-Bremsen auf der Basis dieser harten und hitzebestaendigen Verbundwerkstoffe. Bereits mit serienmaessigen Bremsbelaegen wurden die heute geltenden Verschleiss- und Reibwertanforderungen teilweise weit uebertroffen. Die Leistungsfaehigkeit heutiger Bremssysteme kann damit deutlich gesteigert und die ungefederte Masse des Fahrwerks drastisch reduziert werden. Mit der zielgerichteten Anpassung geeigneter Belaege auf die neuen Keramik-Bremsscheiben scheint erstmals ein Einsatz von Lebensdauerbremsen moeglich zu sein, deren geringe Verschleissraten einen Austausch der Bremsscheiben waehrend der Betriebszeit eines Fahrzeugs ueberfluessig machen. Neben der

Report on a field-portable VME-based distributed data acquisition system

International Nuclear Information System (INIS)

Drigert, M.W.; Cole, J.D.; Reber, E.L.; Young, J.M.

1996-01-01

A development effort was started two years ago to develop a portable data acquisition system which could be used for performing arms control verification and environmental monitoring measurements with complex multi-detector systems in the field. A field portable data acquisition system has been developed around a VMEbus based micro-processor and standard TCP/IP network protocols. The hardware consists of a compact VME crate and a single CAMAC crate containing the signal processing electronics. The component processes of the data acquisition system transfer control and event data over a set of TCP/IP socket connections. The use of network sockets for the interprocess communications allows the data acquisition system to be operated transparently on one workstation or on a number of workstations distributed around a local network

Research for energy efficiency; Forschung fuer Energieeffizienz

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-09-15

The Federal Ministry of Economy enhanced its funding for research in the field of non-nuclear energy in the programme ''Forschung fuer Energieeffizienz'' (Research for Energy Efficiency). The programme focuses on established areas like modern power plant technologies (''Moderne Kraftwerkstechnologien''), fuel cells and hydrogen (''Brennstoffzelle, Wasserstoff''), and energy-optimized building construction (''Energieoptimiertes Bauen''). New subjects are energy-efficient towns and cities (''Energieeffiziente Stadt''), power grids for future power supply (''Netze fuer die Stromversorgung der Zukunft''), power storage (''Stromspeicher''), and electromobility (''Elektromobilitaet''). The brochure presents research and demonstration projects that illustrate the situation in 2010 when the programme was initiated. (orig.)

Integrated systems and modules for engine cooling and vehicle air-conditioning; Integrierte Systeme und Module zur Motorkuehlung und Innenraumklimatisierung

Energy Technology Data Exchange (ETDEWEB)

Loehle, M.; Kern, J.; Kampf, H. [Behr GmbH (Germany)

1998-12-01

The high level of function and quality achieved today in modern vehicles cannot be simply increased by the isolated development of advanced single components alone. By contrast, the holistic optimization of systems opens up new potential. Modern cooling modules and integrated HVAC systems by Behr GmbH and Co. combine several components to form a single compact module whose integrated parts are perfectly matched to each other. Developing complete cockpits at such a high level of integration is another step towards advancing the system concept. Understanding a holistic system allows engineers to develop concepts for an efficient thermal management in the cooling system and to improve ecological compatibility of the vehicle air-conditioning system by using suitable simulation tools. (orig.) [Deutsch] Die gesamtheitliche Optimierung von Systemen eroeffnet neue Potentiale in der Automobilentwicklung. Moderne Kuehlmodule und integrierte Heiz-/Klimageraete der Behr GmbH and Co. fassen zahlreiche Komponenten zu einem kompakten Modul zusammen, dessen Einzelteile aufeinander abgestimmt sind. Die Entwicklung vollstaendiger Cockpits mit einem hohen Integrationsgrad fuehrt den Systemgedanken konsequent weiter. Das Verstaendnis des gesamten Systems erlaubt im Verbund mit geeigneten Simulationswerkzeugen die Entwicklung von Konzepten fuer ein effizientes Thermomanagement im Kuehlsystem und fuer die Verbesserung der Umweltvertraeglichkeit der Kaelteanlage. (orig.)

Adaptive Signal Processing Testbed: VME-based DSP board market survey

Science.gov (United States)

Ingram, Rick E.

1992-04-01

The Adaptive Signal Processing Testbed (ASPT) is a real-time multiprocessor system utilizing digital signal processor technology on VMEbus based printed circuit boards installed on a Sun workstation. The ASPT has specific requirements, particularly as regards to the signal excision application, with respect to interfacing with current and planned data generation equipment, processing of the data, storage to disk of final and intermediate results, and the development tools for applications development and integration into the overall EW/COM computing environment. A prototype ASPT was implemented using three VME-C-30 boards from Applied Silicon. Experience gained during the prototype development led to the conclusions that interprocessor communications capability is the most significant contributor to overall ASPT performance. In addition, the host involvement should be minimized. Boards using different processors were evaluated with respect to the ASPT system requirements, pricing, and availability. Specific recommendations based on various priorities are made as well as recommendations concerning the integration and interaction of various tools developed during the prototype implementation.

Fibre-reinforced ceramics for vehicle brakes; Faserverstaerkte Keramiken fuer Bremsenanwendungen

Energy Technology Data Exchange (ETDEWEB)

Krenkel, W. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Bauweisen- und Konstruktionsforschung

2000-08-01

Fibre-reinforced ceramics are extremely light, with a high fracture toughness, and have a high potential for applications in motor brakes. It is envisaged that they will last through the whole vehicle life. They can be used in passenger cars, industrial vehicles, high-speed trains, aircraft and in safety brakes in machines, plants and haulage systems. [German] Im Rahmen der Raumfahrt-Forschung wurde vom Deutschen Zentrum fuer Luft- und Raumfahrt (DLR) das Fluessigsilicier-Verfahren zur Herstellung von keramischen Verbundwerkstoffen entwickelt. Diese extrem leichten und bruchzaehen Faserkeramiken haben sich unter den besonderen Bedingungen des Weltraums beispielsweise fuer Hitzeschutzstrukturen von Raumfahrzeugen hervorragend bewaehrt. Darueber hinaus zeigten Untersuchungen ein hohes Anwendungspotenzial fuer neue Bremsen mit deutlich verbesserten Reibungs- und Verschleisseigenschaften. Weiterentwicklungen des keramischen Gefueges fuehrten zu innovativen Leichtbau- bzw. Hochleistungs-Bremsen auf der Basis dieser harten und hitzebestaendigen Verbundwerkstoffe. Bereits mit serienmaessigen Bremsbelaegen wurden die heute geltenden Verschleiss- und Reibwertanforderungen teilweise weit uebertroffen. Die Leistungsfaehigkeit heutiger Bremssysteme kann damit deutlich gesteigert und die ungefederte Masse des Fahrwerks drastisch reduziert werden. Mit der zielgerichteten Anpassung geeigneter Belaege auf die neuen Keramik-Bremsscheiben scheint erstmals ein Einsatz von Lebensdauerbremsen moeglich zu sein, deren geringe Verschleissraten einen Austausch der Bremsscheiben waehrend der Betriebszeit eines Fahrzeugs ueberfluessig machen. Neben der Verwendung dieser innovativen Leichtbaubremsen im PKW-Bereich wird zukuenftig deren Einsatz auch fuer Gefahrguttransporter, Hochgeschwindigkeitszuege, Flugzeuge und fuer Sicherheitsbremsen im Maschinen- und Anlagenbau sowie in der Foerdertechnik erwartet. (orig.)

CERN: 500 Millionen fuer neuen Teilchenbeschleuniger

CERN Multimedia

2002-01-01

"Die 20 Mitgliederlaender des Europaeischen Labors fuer Teilchenphysik in Genf CERN haben einen Sparplan zur Finanzierung eines neuen Teilchenbeschleunigers gut geheissen. Rund 500Millionen Franken sollen zu diesem Zweck uminvestiert werden" (1/2 page).

VME-Real-Time Data Acquisition for the Ultracryogenic Gravitational Antenna of the Third Generation

Energy Technology Data Exchange (ETDEWEB)

Mazzitelli, G. [Istituto Nazionale di Fisica Nucleare, Frascati (Italy). Lab. Nazionale di Frascati

1996-05-01

It is described a new design of the front-end electronics for the data acquisition of NAUTILUS, the first ultra cryogenic resonant gravitational wave detector, operating in the INFN National Laboratories of Frascati. The improved sensitivity of this kind of detector poses new requirements on the data acquisition, as more speed, amplitude and timing accuracy are needed. In this work it is discussed the result obtained with a new front-end configuration based on VME standard for a data acquisition rate of 5kHz (present rate 220 Hz). Is it also described the data acquisition system for the cosmic ray telescope assembled around NAUTILUS and the timing system of both the components.

Bundesamt fuer Strahlenschutz 1989-2014

International Nuclear Information System (INIS)

Ebermann, Lutz

2015-01-01

The information on the Bundesamt fuer Strahlenschutz 1989-2014 includes the following contributions: Bfs concentrates the radiation protection expertise; knowledge generation, knowledge testing knowledge application: the BfS as scientific organization; radiation protection and health; radiation protection and environment, safety of nuclear waste management; safety in nuclear technology; specific challenges for BfS.

Bundesforschungsanstalt fuer Ernaehrung. Annual report

International Nuclear Information System (INIS)

1996-01-01

The 1994 annual report of the Bundesforschungsanstalt fuer Ernaehrung describes the tasks, structure and staff and fields of research of this institution and its scientific cooperation with other institutions. The report is supplemented by an alphabetic list off all publications. The BFE specializes in research on nutritional, food and ecotrophological sciences. (vhe) [de

Cosmic ray test system for the ATLAS thin gap chamber modules at KOBE

CERN Document Server

Suigmoto, T; Arataki, Y; Bando, T; Homma, Y; Ichimiya, R; Ikeno, M; Ishii, K; Ishino, M; Iwasaki, H; Kurashige, H; Mima, T; Miyazaki, Y; Nakagawa, Y; Nakaune, Y; Nozaki, M; Ohshita, H; Okumura, K; Sasaki, O; Suzuki, R; Takeda, H; Takeshita, T; Tanaka, S; Uda, J; Yokoyama, C

2004-01-01

Thin gap chamber modules giving function of forward muon trigger to the ATLAS detector in the LHC experiment have been constructed at High Energy Research Organization (KEK) in Japan and their performances have been checked at Kobe University. A large-scale test system specially designed for measuring uniformity of the detection efficiencies and the timing resolution of 8 TGC modules at the same time was successfully operated. Each TGC module had 72 anode wire channels and 64 cathode strip channels (in total 1088 readout channels for 8 modules). Drift tubes consisted of 12 layers (total 428 tubes), between which the TGC modules are put, determined trajectories of cosmic rays. Hit pattern and timing of all detector signals (Trigger counter. Drift tubes and TGCs) were measured by using VME modules. In regular data acquisition situation, i.e. about effective 19 Hz trigger rate from scintillation counters and 73% tracking efficiency by the drift tubes, the detection efficiency of each layer by 5 mm * 5 mm region ...

VME computer monitoring system of KEK-PS fast pulsed magnet currents and beam intensities

International Nuclear Information System (INIS)

Kawakubo, T.; Akiyama, A.; Kadokura, E.; Ishida, T.

1992-01-01

For beam transfer from the KEK-PS Linac to the Booster synchrotron ring and from the Booster to the Main ring, many pulse magnets have been installed. It is very important for the machine operation to monitor the firing time, rising time and peak value of the pulsed magnet currents. It is also very important for magnet tuning to obtain good injection efficiency of the Booster and the Main ring, and to observe the last circulating bunched beam in the Booster as well as the first circulating in the Main. These magnet currents and beam intensity signals are digitized by a digital oscilloscope with signal multiplexers, and then shown on a graphic display screen of the console via a VME computer. (author)

The use potential of aquifer thermal energy storage systems in Canada; Das Anwendungspotential fuer Aquiferwaermespeichersysteme in Kanada

Energy Technology Data Exchange (ETDEWEB)

Cruickshanks, F. [Environment Canada, Dartmouth, ON (Canada); Morofski, E. [Government Services Canada, Ottawa, ON (Canada). Technology RD and D

1994-12-31

This paper offers a brief overview of the historical and technical aspects of aquifer thermal energy storage and its use potential in commercial buildings in Canada. Aquifer thermal energy storage systems are now attractive both for new commercial buildings in Canada and for some already existing ones. This holds true especially of the Atlantic region, where fuel costs are rising and electric power rates vary according to the time of day. The simple pay-back period for ATES systems is between zero and five years. The economic aspects of the use of ATES systems in buildings are pointed out. (orig./BWI) [Deutsch] Dieser Beitrag gibt eine kurze Uebersicht der historischen und technischen Aspekte der Waermespeicherung in Aquiferen und deren Verwendungspotential in kommerziellen Gebaeuden in Kanada. Aquiferwaermespeicherungssysteme sind nunmehr attraktiv sowohl fuer neue als auch fuer manche bereits bestehenden kommerziellen Gebaeude in Kanada. Dies gilt insbesondere fuer die atlantische Region wegen der dort steigenden Kosten fuer Brennstoffe und tageszeitabhaengigen fuer elektrischen Strom. Die einfache Amortisationszeit fuer ATES-Systeme liegt zwischen null und fuenf Jahren. Die wirtschaftlichen Gesichtspunkte des Einsatzes von ATES-Systemen in kommerziellen Gebaeuden werden angefuehrt. (orig./BWI)

Replacing PS controls front end minicomputers by VME based 32-bit processors

International Nuclear Information System (INIS)

Gagnaire, A.; Metz Noblat, N. de; Serre, Ch.; Sicard, Cl.H.

1992-01-01

The PS controls have started the first phase of system rejuvenation, targeted towards the LEP Preinjector Controls. The main impact of this phase is in the architectural change, as both the front-end minicomputers and the CAMAC embedded microprocessors are replaced by microprocessor based VME crates called Device Stub Controllers (DSC). This paper discusses the different steps planned for this first phase, i.e: (1) implementing the basic set of CERN Accelerator common facilities for DSCs (error handling, system surveillance, remote boot and network access); (2) porting the equipment access software layer; (3) applying the Real-time tasks to the LynxOS operating system and I/O architecture, conforming to the real-time constraints for control and acquisition; (4) defining the number and contents of the different DSC needed, according to geographical and cpu-load constraints; (5) providing the general services outside the DSC crates (file servers, data-base services); (6) emulating the current Console programs onto the new workstations. (author)

Feasibility study for new ecolabels for the product group: Wood pellet firings. Final report; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen. Endbericht

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, E.; Weiss, J.; Hirschl, B.

2002-07-01

This assessment is a feasibility study according to ISO 14024. It deals with the question whether an ecolabel is suitable for wood pellet heating systems and how concrete criteria for an ecolabel for wood pellet heating plants could be specified. The study begins with a comprehensive market analysis in order to identify possible plants for which an ecolabel would make sense. In the main part of the study, the environmental relevance of the chosen plants is analysed. For this analysis, plant manufacturers were interviewed and a comparison between wood pellet heating systems and heating systems which use gas, oil or wood was carried out. On the basis of this analysis, it was possible to derive a number of criteria which were discussed with company representatives and other experts in this field. As a result of this dialogue and the investigation process as a whole, the introduction of an ecolabel for wood pellet heating plants can be recommended. Wood pellet heating systems are characterized by their high level of automatation and the use of standardized fuels with constant high quality. Thus, they reach high combustion quality with low emission rates, and risks of misuse are minimized. They may contribute to the increased use of renewable energies and thereby to the achievement of climate protection goals. The proposed certification principles comprise requirements regarding (a) the efficient energy use (efficiency factor under partial load and nominal load, plant's supplementary energy consumption), (b) emission values for CO, NO{sub x}, dust and organic substances, (c) the offer of additional services, as well as (d) requirements with regard to the operating instructions. The transcription of the label is proposed as 'Ecolabel.. because low emission and energy-efficient'. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer Holzpelletfeuerungen

Bundesanstalt fuer Strahlenschutz. Annual report 2013

International Nuclear Information System (INIS)

Ebermann, Lutz

2014-01-01

The annual report 2013 of the Bundesamt fuer Strahlenschutz covers the following issues: from scientific research to preventive consumer protection, actual questions of radiation protection actual challenges in the frame of environmental radiation monitoring; radioactive waste disposal; actual questions on the safety of nuclear technology. The report includes a list of publications.

New data acquisition system for the focal plane polarimeter of the Grand Raiden spectrometer

International Nuclear Information System (INIS)

Tamii, A.; Sakaguchi, H.; Takeda, H.; Yosoi, M.; Akimune, H.; Fujiwara, M.; Ogata, H.; Tanaka, M.; Togawa, H.

1996-01-01

This paper describes a new data acquisition system for the focal plane polarimeter of the Grand Raiden spectrometer at the Research Center for Nuclear Physics (RCNP) in Osaka, Japan. Data are acquired by a Creative Electronic Systems (CES) Starburst, which is a CAMAC auxiliary crate controller equipped with a Digital Equipment Corporation (DEC) J11 microprocessor., The data on the Starburst are transferred to a VME single-board computer. A VME reflective memory module broadcasts the data to other systems through a fiber-optic link. A data transfer rate of 2.0 Mbytes/s between VME modules has been achieved by reflective memories. This rate includes the overhead of buffer management. The overall transfer rate, however, is limited by the performance of the Starburst to about 160 Kbytes/s at maximum. In order to further improve the system performance, the authors developed a new readout module called the Rapid Data Transfer Module (RDTM). RDTM's transfer data from LeCroy PCOS III's or 4298's, and FERA/FERET's directly to CES 8170 High Speed Memories (HSM) in VME crates. The data transfer rate of the RDTM from PCOS III's to the HSM is about 4 Mbytes/s

Bayerisches Landesamt fuer Umweltschutz. Annual report 1999; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [German] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

A 16 channel discriminator VME board with enhanced triggering capabilities

International Nuclear Information System (INIS)

Borsato, E; Garfagnini, A; Menon, G

2012-01-01

Electronics and data acquisition systems used in small and large scale laboratories often have to handle analog signals with varying polarity, amplitude and duration which have to be digitized to be used as trigger signals to validate the acquired data. In the specific case of experiments dealing with ionizing radiation, ancillary particle detectors (for instance plastic scintillators or Resistive Plate Chambers) are used to trigger and select the impinging particles for the experiment. A novel approach using commercial LVDS line receivers as discriminator devices is presented. Such devices, with a proper calibration, can handle positive and negative analog signals in a wide dynamic range (from 20 mV to 800 mV signal amplitude). The clear advantages, with respect to conventional discriminator devices, are reduced costs, high reliability of a mature technology and the possibility of high integration scale. Moreover, commercial discriminator boards with positive input signal and a wide threshold swing are not available on the market. The present paper describes the design and characterization of a VME board capable to handle 16 differential or single-ended input channels. The output digital signals, available independently for each input, can be combined in the board into three independent trigger logic units which provide additional outputs for the end user.

A 16 channel discriminator VME board with enhanced triggering capabilities

Science.gov (United States)

Borsato, E.; Garfagnini, A.; Menon, G.

2012-08-01

Electronics and data acquisition systems used in small and large scale laboratories often have to handle analog signals with varying polarity, amplitude and duration which have to be digitized to be used as trigger signals to validate the acquired data. In the specific case of experiments dealing with ionizing radiation, ancillary particle detectors (for instance plastic scintillators or Resistive Plate Chambers) are used to trigger and select the impinging particles for the experiment. A novel approach using commercial LVDS line receivers as discriminator devices is presented. Such devices, with a proper calibration, can handle positive and negative analog signals in a wide dynamic range (from 20 mV to 800 mV signal amplitude). The clear advantages, with respect to conventional discriminator devices, are reduced costs, high reliability of a mature technology and the possibility of high integration scale. Moreover, commercial discriminator boards with positive input signal and a wide threshold swing are not available on the market. The present paper describes the design and characterization of a VME board capable to handle 16 differential or single-ended input channels. The output digital signals, available independently for each input, can be combined in the board into three independent trigger logic units which provide additional outputs for the end user.

Lean management - an effective way to arrange maintenance?; Lean Management - ein effektiver Weg zur Gestaltung der Instandhaltung?

Energy Technology Data Exchange (ETDEWEB)

Tschuschke, W. [Inst. fuer Instandhaltung gGmbH, Iserlohn (Germany)

1996-08-01

Lean management/lean production wishes to attain more through intelligent operation system/production at less expense (personnel, materials, energy, costs). The object is not harder but more intelligent and production work; we do not need to run faster but to find shorter routes. The idea of lean management`s effects and changes have consequences for the field of maintenance as an equivalent and legitimate business area which are discussed in this paper. (orig.) [Deutsch] Lean Management/Lean Production will durch ein intelligentes Arbeitssystem/Produzieren mit weniger Aufwand (Personal, Material, Energie, Kosten) mehr erreichen. Ziel ist nicht das haertere, sondern das intelligentere und produktivere Arbeiten; wir sollen nicht schneller laufen, sondern kuerzere Wege finden. Fuer den Bereich Instandhaltung als gleichwertiger und gleichberechtigter Unternehmensbereich haben die Gedanken des Lean Managements Auswirkungen und Veraenderungen zur Folge, die im Beitrag genannt werden. (orig.)

Part-turn gearboxes for electric actuators; Schwenkgetriebe fuer elektrische Stellantriebe

Energy Technology Data Exchange (ETDEWEB)

Herbstritt, M. [Riester (W.) GmbH und Co. KG, Muellheim (Germany)

2002-09-01

Different types of gearboxes provide a useful complement to the electric actuator type ranges. The gearboxes can be combined with the actuators in many ways. Multi-turn actuators, for example, can be turned into part-turn actuators. When using a modular system, a suitable solution for almost any automation task in the field of industrial valves can be found. (orig.) [German] Sinnvoll ergaenzt werden elektrische Stellantriebe fuer Armaturen durch verschiedene Arten von Getrieben. Die Getriebe sind in vielfaeltiger Weise mit den Stellantrieben kombinierbar. So werden beispielsweise aus Drehantrieben Schwenkantriebe. Mit einem Baukasten-System laesst sich so fuer nahezu jede Automatisierungsaufgabe im Bereich der Industriearmaturen eine passende Loesung finden. (orig.)

The Linux based distributed data acquisition system for the ISTRA+ experiment

International Nuclear Information System (INIS)

Filin, A.; Inyakin, A.; Novikov, V.; Obraztsov, V.; Smirnov, N.; Vlassov, E.; Yuschenko, O.

2001-01-01

The DAQ hardware of the ISTRA+ experiment consists of the VME system crate that contains two PCI-VME bridges interfacing two PCs with VME, external interrupts receiver, the readout controller for dedicated front-end electronics, the readout controller buffer memory module, the VME-CAMAC interface, and additional control modules. The DAQ computing consist of 6 PCs running the Linux operating system and linked into LAN. The first PC serves the external interrupts and acquires the data from front-end electronic. The second one is the slow control computer. The remaining PCs host the monitoring and data analysis software. The Linux based DAQ software provides the external interrupts processing, the data acquisition, recording, and distribution between monitoring and data analysis tasks running at DAQ PCs. The monitoring programs are based on two packages for data visualization: home-written one and the ROOT system. MySQL is used as a DAQ database

Testing of corrosion resistant materials for evaporation plants for waste water from wet scrubbing of flue gas from power plants; Erprobung korrosionsbestaendiger Werkstoffe fuer Eindampfanlagen fuer Abwasser aus der Rauchgasreinigung von Grossfeuerungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Riedel, G. [Institut fuer Korrosionsschutz GmbH, Dresden (Germany); Stenner, F.; Brill, U. [Krupp-VDM GmbH, Werdohl (Germany)

2001-07-01

High alloyed superaustenitic steels and NiCrMo alloys are recommended in consequence of the results of extensive laboratory corrosion experiments under the strong corrosive conditions with up to 360 g chloride content at temperatures up to 85 C. Because results of laboratory corrosion tests are only of limited relevance to the behaviour in practice, field tests were carried out with immersion of welded materials and of heat exchanger tubes under operating conditions of an evaporation plant for waste water from flue gas desulphurization of a coal-fired power plant. Different kinds of high alloy superaustenitic steels and NiCrMo alloys were studied as TIG-welded specimens in immersion tests. (orig.) [German] Hochlegierte Sonderedelstaehle und NiCrMo-Legierungen empfehlen sich aufgrund der Ergebnisse umfassender Laboruntersuchungen unter den stark korrosiven Bedingungen fuer Eindampfanlagen fuer Abwasser aus der Nassreinigung von Rauchgasen von Grossfeuerungsanlagen mit bis zu 360 g/l Chloridgehalt und Temperaturen bis zu 85 C. Weil aber Ergebnisse von Laborpruefungen nur begrenzte Aussagefaehigkeit fuer das Verhalten unter Praxisbedingungen haben, wurden Feldversuche mit der Auslagerung geschweisster Werkstoffe und von Waermetauscherrohren unter Betriebsbedingungen einer Eindampfanlage fuer Abwasser aus der Rauchgasentschwefelung eines kohlebefeuerten Kraftwerks durchgefuehrt. (orig.)

A Modular VME Data Acquisition System for Counter Applications at the GSI Synchrotron

CERN Document Server

Liakin, D A

2003-01-01

Particle counters perform the control of beam loss and slowly extracted currents at the heavy ion synchrotron (SIS) at GSI. A new VME/Lynx - PC/Linux based data acquisition system has been developed to combine the operating purposes beam loss measurement, spill analysis, spill structure measurement and matrix switching functionality in one single assembly. In this paper a detailed PC-side software description is presented. To achieve best system stability, the software has been divided into time critical networking and data deploying threads and low or normal priority interface tasks. Some new abilities in the fields of data computation and presentation are reported. A hardware description is presented, in detail a programmable GSI-EVENT controller, which is based on an ordinary 8 bit RISC microprocessor and which has been integrated into the system, to synchronize the data acquisition with the sophisticated “virtual accelerator” timing at GSI. First experiences gained while the commission...

Up gradation of VME based data acquisition for SST-1 superconducting magnets

International Nuclear Information System (INIS)

Varmora, Pankaj; Parghi, Bhadresh; Banaudha, Moni; Prasad, Upendra

2017-01-01

SST-1 magnet system consists of sixteen Toroidal Field (TF) coils and nine Poloidal Field (PF) superconducting coils along with a pair of vertical field coils and air core ohmic transformer. These magnets are instrumented with various cryogenic compatible sensors and voltage taps for its monitoring, operation, protection, and control during different machine operational scenarios like cryogenic cool down, current charging cycles including ramp up, flat top, plasma breakdown, dumping/ramp down and warm up. A VME hardware based data acquisition system has been developed for data monitoring, acquisition and control of magnet operation. A java platform based client and server utility has been developed for this data acquisition system. Upgradation of this java software utility has been carried out with enhance features, fast operating performance and new tools additions. Upgradation features includes larger data file sizes, highlights of critical data indicators, new file generation, online mass flow calculations etc. This poster describes basis hardware details, upgradation of previous software utility, testing and troubleshooting during software development. (author)

Front-end DAQ strategy and implementation for the KLOE-2 experiment

Science.gov (United States)

Branchini, P.; Budano, A.; Balla, A.; Beretta, M.; Ciambrone, P.; De Lucia, E.; D'Uffizi, A.; Marciniewski, P.

2013-04-01

A new front-end data acquisition (DAQ) system has been conceived for the data collection of the new detectors which will be installed by the KLOE2 collaboration. This system consists of a general purpose FPGA based DAQ module and a VME board hosting up to 16 optical links. The DAQ module has been built around a Virtex-4 FPGA and it is able to acquire up to 1024 different channels distributed over 16 front-end slave cards. Each module is a general interface board (GIB) which performs also first level data concentration tasks. The GIB has an optical interface, a RS-232, an USB and a Gigabit Ethernet Interface. The optical interface will be used for DAQ purposes while the Gigabit Ethernet interface for monitoring tasks and debug. Two new detectors exploit this strategy to collect data. Optical links are used to deliver data to the VME board which performs data concentration tasks. The return optical link from the board to the GIB is used to initialize the front-end cards. The VME interface of the module implements the VME 2eSST protocol in order to sustain a peak data rate of up to 320 MB/s. At the moment the system is working at the Frascati National Laboratory (LNF).

Front-end DAQ strategy and implementation for the KLOE-2 experiment

International Nuclear Information System (INIS)

Branchini, P; Budano, A; Balla, A; Beretta, M; Ciambrone, P; Lucia, E De; D'Uffizi, A; Marciniewski, P

2013-01-01

A new front-end data acquisition (DAQ) system has been conceived for the data collection of the new detectors which will be installed by the KLOE2 collaboration. This system consists of a general purpose FPGA based DAQ module and a VME board hosting up to 16 optical links. The DAQ module has been built around a Virtex-4 FPGA and it is able to acquire up to 1024 different channels distributed over 16 front-end slave cards. Each module is a general interface board (GIB) which performs also first level data concentration tasks. The GIB has an optical interface, a RS-232, an USB and a Gigabit Ethernet Interface. The optical interface will be used for DAQ purposes while the Gigabit Ethernet interface for monitoring tasks and debug. Two new detectors exploit this strategy to collect data. Optical links are used to deliver data to the VME board which performs data concentration tasks. The return optical link from the board to the GIB is used to initialize the front-end cards. The VME interface of the module implements the VME 2eSST protocol in order to sustain a peak data rate of up to 320 MB/s. At the moment the system is working at the Frascati National Laboratory (LNF).

Utilizing offshore potentials for wind power generation; Nutzung der Offshore-Potentiale fuer die Windenergie

Energy Technology Data Exchange (ETDEWEB)

Hannemann, H. [Neptun Industrie GmbH, Rostock (Germany)

2000-07-01

The contribution discusses the importance of the offshore market and recommends measures to develop it. A turnkey offer is required for exports, which means that all organisations cooperating in the pilot project must prove their competence. The status of a pilot project in the Baltic Sea and the further plans for the park (20 systems, 40 MW, more than 10 km off the coast, water depth about 20 m) are reviewed. [German] Zur Erschliessung des Offshore - Marktes fuer Windenergieanlagen ist es erforderlich, die Technologie ''vor der eigenen Haustuer'' demonstrieren zu koennen. Nach einer Betrachtung der europaeischen Offshore - Windenergie - Potentiale und der davon moeglicherweise nutzbaren Anteile wird die Bedeutung des Offshore - Marktes deutlich. Besonders fuer die Hersteller ist der Offshore - Markt fuer den langfristigen Export von besonderer Bedeutung. Um den Export zu realisieren, ist ein Turnkey - Angebot erforderlich, so dass im Pilotprojekt alle an der gesamten Realisation beteiligten Organisationen ihre Kompetenz beweisen muessen und koennen. Der Stand eines Pilotprojektes in der Ostsee und die weitere Planung fuer den Park (20 Anlagen, 40 MW, >10 km Kuestenentfernung, ca. 20 m Wassertiefe) wird dargestellt. (orig.)

Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2013/14; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Jahresbericht 2013/14

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-02-15

The annual report 2013/14 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) includes projects and key activities on the following issues: reactor safety, waste disposal, radiation protection, environmental protection and the support of foreign authorities and TSO. The project executing organizations, the governmental funding, share holding and subsidiaries are summarized.

Nice module. Apollon Solar present their new line of solar modules; Nettes Modul. Apollon Solar stellt Linie fuer neuartige Modultechnologie vor

Energy Technology Data Exchange (ETDEWEB)

Podewils, C.

2008-06-15

Solar modules, TGV engines and perfume Zerstaeuber seem to have nothing in common. The new solar module developed by French producer Apollon Solar makes use of both technologies in the construction process. The contribution presents the 'Nice' module which has many new features. (orig.)

Condition monitoring for offshore wind parks. A module for ensuring plant availability and risk minimization; Condition Monitoring fuer Offshore-Windparks. Ein Baustein zur Sicherstellung der Anlagenverfuegbarkeit und zur Risikominimierung

Energy Technology Data Exchange (ETDEWEB)

Hoering, B. [Deutsche Montan Technologie GmbH, Essen (Germany). Engine Logic Division

2003-07-01

The economic success of offshore wind energy and hence its competitiveness alongside conventional energy generation depends to a major extent on the reliability and availability of the installations. The profitability is determined, as is efficiency, by the costs for operation and maintenance over the whole plant life. Only plants with low operational management costs are therefore attractive in the long-term for the market and will help create customer satisfaction and loyalty. Because the costs for servicing and maintenance of offshore installations will be several times higher than for onshore facilities, the manufacturers and operators are called upon to think about new approaches to monitoring and maintaining offshore wind turbines. (orig.) [German] Der wirtschaftliche Erfolg der Offshore-Windenergie und somit die Konkurrenzfaehigkeit gegenueber konventioneller Energiegewinnung haengt massgeblich von der Zuverlaessigkeit und der Verfuegbarkeit der Anlagen ab. Die Wirtschaftlichkeit wird neben dem Wirkungsgrad durch die Kosten fuer Betrieb und Wartung waehrend der gesamten Anlagenlebensdauer bestimmt. Nur Anlagen mit geringen Betriebsfuehrungskosten sind daher fuer den Markt langfristig attraktiv und tragen zur Kundenzufriedenheit und -bindung bei. Weil die Kosten fuer Wartung und Instandhaltung von Offshore-Anlagen um ein vielfaches hoeher sein werden als bei Onshore-Anlagen, sind die Hersteller und Betreiber aufgefordert, ueber neue Konzepte der Windenergieanlagen-(WEA-)Ueberwachung und -instandhaltung nachzudenken. (orig.)

Steam supply for the Principality of Liechtenstein. Process heat for industrial applications; Dampflieferung fuer das Fuerstentum Liechtenstein. Prozesswaerme fuer die Industrie

Energy Technology Data Exchange (ETDEWEB)

Dokter, Ernst [VfA Buchs fuer Kraft-Waerme-Kopplung und das Ferndampfsystem, Buchs (Switzerland)

2009-07-15

Switzerland is leading the world in thermal waste management. There are 29 incinerators (KVA - Kehrichtverbrennungsanlagen) with a capacity of 3.7 million t.p.a. They are operated by industrial or municipal owners and by the Verein fuer Abfallentsorgung Buchs SG. (orig.)

Feasibility study for new ecolabels according to ISO 14024 (type 1) within the product group: wood pellet heating systems; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, E.; Weiss, J.; Hirschl, B. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany)

2003-01-01

This assessment is a feasibility study according to ISO 14024. It deals with the question whether an ecolabel is suitable for wood pellet heating systems and how concrete criteria for an ecolabel for wood pellet heating plants could be specified. The study begins with a comprehensive market analysis in order to identify possible plants for which an ecolabel would make sense. In the main part of the study, the environmental relevance of the chosen plants is analysed. For this analysis, plant manufacturers were interviewed and a comparison between wood pellet heating systems and heating systems which use gas, oil or wood was carried out. On the basis of this analysis, it was possible to derive a number of criteria which were discussed with company representatives and other experts in this field. As a result of this dialogue and the investigation process as a whole, the introduction of an ecolabel for wood pellet heating plants can be recommended. Wood pellet heating systems are characterized by their high level of automatation and the use of standardized fuels with constant high quality. Thus, they reach high combustion quality with low emission rates, and risks of misuse are minimized. They may contribute to the increased use of renewable energies and thereby to the achievement of climate protection goals. The proposed certification principles comprise requirements regarding (a) the efficient energy use (efficiency factor under partial load and nominal load, plant's supplementary energy consumption), (b) emission values for CO, NO{sub x}, dust and organic substances, (c) the offer of additional services, as well as (d) requirements with regard to the operating instructions. The transcription of the label is proposed as 'Ecolabel.. because low emission and energy-efficient'. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer Holzpelletfeuerungen

Bayerisches Landesamt fuer Umweltschutz. Annual report 2004; Bayerisches Landesamt fuer Umweltschutz. Jahresbericht 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Subjects: Central services; Air pollution abatement; Noise and vibration protection; Protection against non-ionising radiation; Waste management, land pollution and soil protection; Nuclear power and radiation protection; Conservation and landscaping; Central technical issues. The tasks of the Landesamt are illustrated by practical examples. [German] Das bayerische Landesamt fuer Umweltschutz stellt in seinem Jahresbericht die Aufgabenschwerpunkte und Taetigkeitwsfelder dar. Der Bericht gliedert sich in die Bereiche: Zentrale Dienste; Luftreinhaltung; Laerm- und Erschuetterungsschutz, Schutz vor nichtionisierender Strahlung; Abfallwirtschaft, Altlasten und Bodenschutz; Kernenergie und Strahlenschutz; Naturschutz und Landschaftspflege; Zentrale Fachaufgaben. Dabei werden anhand von konkreten Beispielen die Aufgaben des Landesamtes erlaeutert. (uke)

Macromolecular contrast media. A new approach for characterising breast tumors with MR-mammography; Makromolekulare Kontrastmittel fuer die MR-Mammographie. Ein neuer Ansatz fuer die Charakterisierung von Mammatumoren

Energy Technology Data Exchange (ETDEWEB)

Daldrup, H.E. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Muenster Univ. (Germany). Inst. fuer Klinische Radiologie; Roberts, T.P.L.; Roberts, H.C. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Mainz Univ. (Germany). Klinik und Poliklinik fuer Radiologie; Muehler, A. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Berlex Laboratories, Wayne, NJ (United States); Gossmann, A. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Koeln Univ. (Germany). Inst. und Poliklinik fuer Radiologische Diagnostik; Wendland, M.; Brasch, R.C. [Muenster Univ. (Germany). Inst. fuer Klinische Radiologie; Rosenau, W. [California Univ., San Francisco, CA (United States). Dept. of Pathology

1997-09-01

The value of macromolecular contrast agents (MMCM) for the characterization of benign and malignant breast tumors will be demonstrated in this review. Animal studies suggest a high potential of MMCM to increase the specificity of MR-mammography. The concept of tumor differentiation is based on the pathological hyperpermeability of microvessels in malignant tumors. MMCM show a leak into the interstitium of carcinomas, whereas they are confined to the intravascular space in benign tumors. Capabilities and limitations of the MMCM-prototype. Albumin-Gd-DTPA, for breast tumor characterization will be summarized and compared to the standard low molecular weight contrast agent Gd-DTPA. Initial experience with new MMCM, such as Dendrimers, Gd-DTPA-Polylysine and MS-325 will be outlined. The potential of `blood-pool`-iron oxides, such as AMI-227 for the evaluation of tumor microvascular permeabilities will be discussed. (orig.) [Deutsch] Diese Uebersicht stellt den Stellenwert makromolekularer Kontrastmittel (MMKM) fuer die MR-tomographische Charakterisierung von benignen und malignen Mammatumoren dar. Aufgrund experimenteller Studien lassen MMKM eine signifikante Verbesserung der Spezifitaet der dynamischen kontrastmittelunterstuetzten MR-Mammographie erwarten. Das differentialdiagnostische Konzept beruht auf der pathologischen Hyperpermeabilitaet von Kapillaren in Karzinomen, die einen MMKM-Austritt in das Tumorinterstitium bedingt, waehrend die intakten Kapillaren benigner Tumoren nicht permeabel fuer MMKM sind. Diagnostische Moeglichkeiten und Grenzen des MMKM-Prototyps, Albumin-Gd-DTPA (92 kD), werden dargestellt und mit dem niedermolekularen Standard-Kontrastmittel Gd-DTPA (500 D) verglichen. Erste Erfahrungen mit neuen, fuer die klinische Anwendung optimierten MMKM-Praeparaten, wie das Kaskadenpolymer, Gd-DTPA-Polylysine und das MS-325 werden vorgestellt. Das Potential von Blood-pool-Eisenoxidpraeparaten, z.B. AMI-227, fuer die Bestimmung von

JINR supercomputer of the module type for event parallel analysis

International Nuclear Information System (INIS)

Kolpakov, I.F.; Senner, A.E.; Smirnov, V.A.

1987-01-01

A model of a supercomputer with 50 million of operations per second is suggested. Its realization allows one to solve JINR data analysis problems for large spectrometers (in particular DELPHY collaboration). The suggested module supercomputer is based on 32-bit commercial available microprocessor with a processing rate of about 1 MFLOPS. The processors are combined by means of VME standard busbars. MicroVAX-11 is a host computer organizing the operation of the system. Data input and output is realized via microVAX-11 computer periphery. Users' software is based on the FORTRAN-77. The supercomputer is connected with a JINR net port and all JINR users get an access to the suggested system

50. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie. Abstracts

International Nuclear Information System (INIS)

2015-01-01

The volume on the 50th annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie includes the abstracts concerning the following issues: infectious central nervous system diseases, neurodegenerations, infarction, petrosal bone pathology, neurointerventions.

49. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie. Abstracts

International Nuclear Information System (INIS)

2014-01-01

The conference proceedings of the 48. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie contain abstracts on the following issues: neuro-oncological imaging, multimodal imaging concepts, subcranial imaging, spinal codes, interventional neuroradiology.

Design and development of FPGA based TCP/IP module for real time computers in nuclear power plants

International Nuclear Information System (INIS)

Balasri, G. Janani; Santhana Raj, A.; Gour, Aditya; Murali, N.; Manikandan, J.

2013-01-01

An VME (Virtual Module Europa) bus based Real Time Computer's (RTC's) are being developed for Prototype Fast Breeder Reactor (PFBR) which is in an advanced stage of construction at Kalpakkam, where the RTC's have to communicate to the central process computer on the data collected from the field instrument and receive data from the central process computer. A Distributed Digital Control System (DDSC) architecture has been designed for this communication which is based on Transfer Communication Protocol/Internet Protocol (TCP/IP) over Ethernet. Currently the RTC's uses 'Wiznet Module', a bought out chip which implements the TCP/IP stack in hardware. This project concentrates on the design and development of Field Programmable Gate Array (FPGA) based TCP/IP module that runs on Microblaze, a 32-bit softcore processor, to take care of the communication as that of Wiznet module. Advantage of switching over to FPGA based system are its reconfigurability, desired number of sockets, and the design is stable even if the FPGA's get obsolete. (author)

Energy revolution for Africa; Energierevolution fuer Afrika

Energy Technology Data Exchange (ETDEWEB)

Gies, Erica

2017-07-01

Decreasing energy costs from renewable sources could enable many African countries to make the leap into a clean future. This would save the continent the detour via the classic dirty sources. [German] Sinkende Kosten fuer Energie aus erneuerbaren Quellen koennten vielen afrikanischen Laendern den Sprung in eine saubere Zukunft ermoeglichen. Damit wuerde sich der Kontinent den Umweg ueber die klassischen schmutzigen Quellen sparen.

Technology for the future; Technik fuer die Zukunft

Energy Technology Data Exchange (ETDEWEB)

Dennenmoser, Martin; Steininger, Sebastian [Fraunhofer Institut fuer Solare Energiesysteme ISE, Freiburg im Breisgau (Germany). Electrical Energy Systems (EES)

2013-10-15

The presented case study by the Fraunhofer Institute ISE shows that the market for stationary electrochemical storage prices are currently too high for economical operation. In winter, a battery in Germany is not always fully loaded because of low sunlight. Therefore, the combination of a battery with a PV system at this time of year does not have enough full cycles to be economical. For more complete cycles of the year and consequently lower specific storage cost wind turbines or other power generators can be connected. Since - in contrast to lead acid batteries - there is no experience with long-term storage in lithium and redox flow batteries, this study is based on current forecasts. Compared to lithium-ion batteries, lead-acid and redox flow batteries have a lower efficiency, so that the investment costs of the battery must be lower because fewer savings can be achieved. Especially for short-term storage, the production costs must be reduced. The cost reduction potential of redox flow and lithium-ion batteries is due to the current technical state of development compared to lead acid batteries very high. This means that an economic operation in the future is possible with constant development of electricity and battery prices. [German] Die vorgestellte Fallstudie des Fraunhofer Instituts ISE zeigt, dass die Marktpreise fuer stationaere elektrochemische Speicher aktuell fuer einen wirtschaftlichen Betrieb zu hoch sind. Im Winter wird eine Batterie in Deutschland aufgrund der niedrigen Sonneneinstrahlung nicht immer komplett geladen. Daher hat die Kombination eines Speichers mit einer PV-Anlage zu dieser Jahreszeit nicht genug Vollzyklen, um wirtschaftlich zu sein. Fuer mehr Vollzyklen im Jahr und demzufolge geringere spezifische Speicherkosten koennen Windkraftanlagen oder andere Stromerzeuger angeschlossen werden. Da es- im Gegensatz zu Bleisaeure- Batterien - noch keine Erfahrung mit Langzeitspeichern im Bereich Lithium und Redox-Flow gibt, beruht diese

An integrated computer control system for the ANU linac

Science.gov (United States)

Davidson, P. M.; Foote, G. S.

1996-02-01

One facet of the installation of the superconducting linac at the ANU is the need for computer control of a variety of systems, such as beam transport, resonator RF, cryogenics and others. To accommodate this, a number of control interfaces (for example, analogue signals and RS232 serial lines) must be employed. Ideally, all of the systems should be able to be controlled from a central location, remote from the actual devices. To this end a system based around VAX computers and VME crates has been designed and is currently being developed and implemented. A VAXstation is used to issue control messages and perform high-level functions, while VME crates containing appropriate modules (primarily DACs, ADCs and digital I/O boards) control the devices. The controllers in the VME crates are AEON rtVAX modules running a real-time operating system. Communication with the VAXstation is via DECnet, on a private ethernet to allow communication rates unaffected by unrelated network activity and potentially increasing the security of the system by providing a possible network isolation point. Also on this ethernet are a number of terminal servers to control RS232 devices. A central database contains all device control and monitoring parameters. The main control process running on the VAXstation is responsible for maintaining the current values of the parameters in the database and for dispatching control messages to the appropriate VME crate or RS232 serial line. Separate graphical interface processes allow the operator to interact with the control process, communicating through shared memory. Many graphics processes can be active simultaneously, displaying either on a single or on multiple terminals. Software running on the rtVAX controllers handles the low-level device-specific control by translating messages from the main control process to VME commands which set hardware outputs on VME modules. Similarly, requests for the value of a parameter result in the rtVAX program

Threshold limit values, test values and sanitation values for soil sanitation; Richt-, Pruef- und Sanierungswerte fuer den Bodenschutz

Energy Technology Data Exchange (ETDEWEB)

Karlaganis, G.; Dettwiler, J. [Bundesamt fuer Umwelt, Wald und Landschaft (BUWAL), Bern (Switzerland). Abt. Stoffe, Boden, Biotechnologie

1998-09-01

Soils, the basis for human, plant and animal life, are exposed to quantitative and qualitative deterioration. Quantitative deterioration refers to paving of ground but also to erosion and soil destruction. There are new regulations for physical protection of soil which refer to soil erosion, compacting and handling of soil during building construction. (orig.) [Deutsch] Boden als natuerliche Lebensgrundlage fuer Mensch, Tiere und Pflanzen ist quantitativen und qualitativen Beeintraechtigungen ausgesetzt. Als quantitative Beeintraechtigung gilt jede Art von Verminderungen der Boeden durch Bauten und Anlagen, aber auch durch Erosion oder Bodenschwund. Erlassen worden sind nun neue Bestimmungen fuer drei Bereiche des physikalischen Bodenschutzes, naemlich fuer die Bodenerosion, die Bodenverdichtung und fuer den Umgang mit dem Boden vor allem beim Bauen. Die Verordnung vom 1. Juli 1998 ueber Belastungen des Bodens (VBBo`98) erhaelt neu drei Arten von Beurteilungs- bzw. Massnahmewerten, naemlich Richtwerte, Sanierungswerte und Pruefwerte. (orig./ABI)

EMUs for the Oeresund link; Elektrische Triebzuege fuer die Oeresundverbindung

Energy Technology Data Exchange (ETDEWEB)

Bengtsson, J.E. [Bombardier Transportation GmbH, Vaesteraas (Sweden)

2001-07-01

Danish and Swedish Railways jointly purchased new EMUs type Contessa for the Oresund Link, starting operation in summer 2000. By high acceleration the three car electric multiple units reach a top speed of 180 km/h. Several EMUs can be coupled quickly to the Flexfrontsystem technology. Further special features are equipments for two different line voltages as well as for two signalling and automatic train control systems and a low floor part. (orig.) [German] Die daenische und die schwedische Eisenbahn haben gemeinsam fuer die Oresund-Verbindung neue dreiteilige Triebzuege Contessa beschafft und im Sommer 2000 in Betrieb genommen. Die elektrischen Triebzuege erreichen mit hoher Beschleunigung 180 km/h Hoechstgeschwindigkeit und koennen dank des Flexfrontsystems schnell zu mehreren gekuppelt werden. Weitere Merkmale sind die Ausruestungen fuer zwei Fahrleitungsspannungen, zwei Signal- und Zugbeeinflussungssysteme sowie ein Niederflurbereich. (orig.)

Significance of CT analysis of regional lymph node metastases in colorectal cancer; Bedeutung der CT fuer die Beurteilung regionaerer Lymphknotenmetastasen bei kolorektalen Karzinomen

Energy Technology Data Exchange (ETDEWEB)

Gomille, T.; Christ, F. [Duesseldorf Univ. (Germany). Abt. fuer Radiologie und Nuklearmedizin; Aleksic, M.; Ulrich, B. [Krankenhaus Gerresheim (Germany). Chirurgische Klinik

1998-12-01

Purpose: For preoperative staging of colorectal cancer a CT scan is frequently performed. This report examines the sensitivity of CT for regional lymph node metastasis of colorectal cancer using different criteria. Materials and methods: Preoperative CT scans of 153 patients with colorectal cancer were analyzed using different criteria for N1. The results were then compared to the postoperative histological findings. Results: For N1=lymph nodes (LN)>1 cm the sensitivity was 47%. For N1=LN>1 cm or an increased number of LN<1 cm the sensitivity was 71%. In patients with a primary tumor seen on CT, sensitivity rose to 87%. Discussion: Evidence of regional nodal metastatic disease is only relevant for rectal cancer, colon polyps, and for locally excised tumors when considering present surgical concepts for the treatment of colorectal cancer. In these cases CT analysis using the broadened criteria for N1 proposes a valuable argument regarding possible preoperative radiotherapy or an operative revision. (orig.) [Deutsch] Die Sensitivitaet fuer den Nachweis regionaerer Lymphknotenmetastasen kolorektaler Karzinome wurde unter Anwendung verschiedener Kriterien fuer das N1-Stadium an Patienten mit histologisch gesichertem Lymphknotenbefund untersucht. Fuer das Kriterium N1=Lymphknoten (LK)>1 cm betrug die Sensitivitaet 47%. Fuer N1=LK>1 cm/vermehrte Anzahl LK<1 cm war sie 71%, bei erkennbarem Primaertumor sogar 87%. Unter Beruecksichtigung der derzeit geltenden operativen Therapiekonzepte ist der Nachweis von regionaeren Lymphknotenmetastasen nur bei Rektumkarzinom bzw. fuer Kolonpolypen oder fuer lokal exzidierte Karzinome fuer das therapeutische Vorgehen relevant. In diesen Faellen leistet die CT mit den erweiterten Kriterien fuer ein N1-Stadium trotz hoeherer falsch-positiver Raten eine wertvolle Hilfestellung fuer die Entscheidung ueber eine neoadjuvante Bestrahlung oder eine Nachresektion. (orig.)

Particle Reduction Strategies - PAREST. Energy scenarios for PAREST. Sub-report; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Energieszenarien fuer PAREST. Teilbericht

Energy Technology Data Exchange (ETDEWEB)

Joerss, Wolfram; Degel, Melanie [Institut fuer Zukunftsstudien und Technologiebewertung gGmbH (IZT), Berlin (Germany)

2013-06-15

In the research project PAREST emission scenarios to 2020 for particulate matter (PM{sub 10} und PM{sub 2,5}), and aerosol precursors SO{sub 2}, NO{sub x}, NH{sub 3} and NMVOC were prepared for Germany and Europe, mitigation measures evaluated and the results used to model the PM pollution load for Germany. In this part of the report to PAREST energy scenarios used for PAREST are presented. [German] Im Forschungsvorhaben PAREST wurden Emissionsszenarien bis 2020 fuer Feinstaub (PM{sub 10} und PM{sub 2,5}) und die Aerosol-Vorlaeufersubstanzen SO{sub 2}, NO{sub x}, NH{sub 3} und NMVOC fuer Deutschland und Europa erstellt, Minderungsmassnahmen evaluiert und daraus die PM-Immissionsbelastung fuer Deutschland modelliert. In diesem Teilbericht zu PAREST werden die fuer PAREST benutzten Energieszenarien vorgestellt.

Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2010/2011; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Jahresbericht 2010/2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

The annual report 2010/11 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) covers the following topics: organization, corporate development and public relations; reactor accident in Fukushima; Projects and work priorities (reactor safety; waste management; radiation and environmental protection; international projects); project management and project support; equity participations and subsidiaries (RISKAUDIT IRSN/GRS International; institute for safety technologies (ISTec), European Nuclear Safety Training and Tutoring Institute (ENSTTI)).

80 K - Helium circuit with innovative, gas-bearing, oil-free turbo compressor. Conception, realization, commissioning and test of the 80 K refrigeration supply for the superconducting electron source at HZB; 80 K - Helium-Kreis mit innovativem, gasgelagertem, oelfreiem Turbokompressor. Konzeption, Realisierung, Inbetriebnahme und Test der 80 K-Kaelteversorgung fuer die supraleitenden Elektronenquelle am HZB

Energy Technology Data Exchange (ETDEWEB)

Gloeckner, Felix [Helmholtz-Zentrum Berlin fuer Materialien und Energie GmbH, Berlin (Germany)

2017-07-01

The system presented in this paper supplies the test module for the superconducting electron source (GunLab) at the Helmholtz-Zentrum Berlin (HZB) with 500 W cooling capacity at 80 K.Since direct evaporation of liquid nitrogen in the module is not desirable for safety reasons, the system operates with an intermediate helium circuit. In order to use not only the latent cold of liquid nitrogen, but also the sensitive component, a new concept consisting of a dual heat exchanger and a bath cryostat is used. The coldbox also contains an adjustable bypass with integrated electric heater for test purposes.A new type of warm compressor is used to circulate the helium. The turbo compressor is oil-free, gas-stored and in helium-tight semi-hermetic design. In order to take advantage of these unique properties, Fischer Engineering AG has adapted the turbo compressor for use with helium.The paper concludes with a test of the system and an insight into the current operating experience, as well as a preview of the next, larger version of bERLinPro. [German] Die in diesem Paper vorgestellte Anlage versorgt das Testmodul fuer die supraleitende Elektronenquelle (GunLab) am Helmholtz-Zentrum Berlin (HZB) mit 500 W Kuehlleistung bei 80 K. Da eine Direktverdampfung von Fluessigstickstoff im Modul aus Sicherheitsgruenden nicht erwuenscht ist, arbeitet die Anlage mit einem Heliumzwischenkreis. Um nicht nur die latente Kaelte des fluessigen Stickstoffs, sondern auch den sensiblen Anteil zu nutzen, wird ein neues Konzept, bestehend aus einem Dualwaermeuebertrager und einem Badkryostaten verwendet. Die Coldbox enthaelt fuer Testzwecke darueber hinaus einen regelbaren Bypass mit inte-griertem elektrischem Heizer. Fuer die Umwaelzung des Heliums kommt eine neue Art eines warmen Kompressors zum Einsatz. Der Turbokom-pressor ist oelfrei, gasgelagert und in heliumdichter halb-hermetischer Bauweise ausgefuehrt. Um dessen, in dieser Leistungsklasse einzigartigen Eigenschaften zu nutzen, wurde der

Bundesamt fuer Strahlenschutz. Annual report 1992

International Nuclear Information System (INIS)

1993-08-01

The progress report submitted by Bundesamt fuer Strahlenschutz reveals that this federal radiation protection agency is not only entrusted with the fulfillment of the federal administrative tasks imposed by law but engages in applications-oriented research regarding the operational, metrological and health-related aspects of radiation protection, regarding nuclear safety and radioactive waste management. In addition, BfS takes care of public-relations tasks. The reports submitted by the BfS departments are completed by summaries of the main research results. (orig.) [de

Digital measurement system for the LHC klystron high voltage modulator.

CERN Document Server

Mikkelsen, Anders

Accelerating voltage in the Large Hadron Collider (LHC) is created by a means of 16 superconducting standing wave RF cavities, each fed by a 400MHz/300kW continuous wave klystron amplifier. Part of the upgrade program for the LHC long shutdown one is to replace the obsolete analogue current and voltage measurement circuitry located in the high voltage bunkers by a new, digital system, using ADCs and optical fibres. A digital measurement card is implemented and integrated into the current HV modulator oil tank (floating at -58kV) and interfaced to the existing digital VME boards collecting the data for several klystrons at the ground potential. Measured signals are stored for the logging, diagnostics and post-mortem analysis purposes.

Automatic test equipment for C and I of compact LWR

International Nuclear Information System (INIS)

Mayya, Anuradha; Marathe, P.P.; Madala, Kalyan C.

2014-01-01

The C and I of compact LWR consist of a wide variety of electronic modules. Testing of these modules manually was found to be very cumbersome. To ease the testing of these modules, Automatic Test Equipments (ATE) were developed jointly by BARC and ECIL. This paper describes the design of two ATEs for testing 69 types of modules. A power supply ATE was developed for 43 types of power supply modules of type AC-AC, AC-DC, DC-DC and signal conditioning modules. A VME ATE was developed to test 26 types of VME bus based and other microcontroller based non-bussed modules. These ATEs are used for the automated black box testing of modules by feeding power and control inputs and checking the outputs without operator intervention. This paper describes the important considerations in design and the major design challenges. (author)

Integral energy concepts for office and residential buildings; Integrale Energiekonzepte fuer Buero- und Wohngebaeude

Energy Technology Data Exchange (ETDEWEB)

Velten, W.

1998-06-01

It has been confirmed by practical project experience that integral energy concepts are an excellent basis for the construction of energy-efficient buildings. In the extreme case buildings can even be self-sufficient in their energy supply. Uniting the responsibility for the overall energy and technology concept in the hands of a single contractor can help reduce frictional losses between those involved in the planning as well costs. A good example of this is the use of a simulation calculation for the prescribed demonstration of proper heat insulation. The presented projects show that it is possible to construct ecologically answerable buildings at attractively low costs. The presented concepts appear particularly convincing from the viewpoint of long-term maintenance of value and user-specific advantages such as agreeable working conditions. [Deutsch] Die konkreten Projekterfahrungen bestaetigen, dass durch integrale Energiekonzepte sowohl im Verwaltungs- als auch im Wohnungsbau hervorragende Voraussetzungen fuer energiesparende Gebaeude geschaffen werden koennen. Im Extremfall kann sogar eine autarke Energieversorgung erreicht werden. Durch Zusammenfassung der Gesamtverantwortung fuer das Energie- und Technikkonzept in einer Hand koennen Reibungsverluste zwischen den Planungsbeteiligten reduziert und Kosten gesenkt werden. Ein Beispiel hierfuer ist die Verbindung des vorgeschriebenen Waermeschutznachweises mit einer fuer alle Beteiligten wesentlich aussagekraeftigeren Simulationsrechnung. Die vorgestellten Projekte zeigen, dass oekologisch sinnvolle Gebaeude auch zu oekonomisch attraktiven Kosten erstellt werden koennen, wobei insbesondere der Aspekt des langfristigen Werterhalts und die nutzerspezifischen Vorteile, z.B. durch angenehmere Arbeitsbedingungen, fuer die vorgestellten Konzepte spricht. (orig.)

The Institut for Mining - Chair in the Theory of Mining Methods and Operations at Clausthal Technological University; Das Institut fuer Bergbau - Professur fuer Bergbauliche Verfahrens- und Betriebslehre der TU Clausthal

Energy Technology Data Exchange (ETDEWEB)

Knissel, W.; Mischo, H. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. fuer Bergbau

2002-09-05

The Chair in the Theory of Mining Methods and Operations (Deep Mines) at the Institute for Mining at Clausthal Technological University deals with the theory of and research into underground extraction of solid mineral raw materials. With the concentration and concentration of the German mining industry the department has focussed more attention on foreign mining industries and utilisation of the earth's crust in general. The extractive mining industry is augmented by the underground utilisation of cavities for disposal purposes and for infrastructural tasks. Accordingly the courses offered have been extended towards environmental protection and geotechnics. In particular basic research in the field of disposal in mines has become one of the main areas of research in the department not least of all because of the financing from public funds. Theory, research and further training now cover underground extraction in mines, disposal in mines and rehabilitation of contaminated industrial sites. (orig.) [German] Die Proffesur fuer Bergbauliche Verfahrens- und Betriebslehre (Tiefbau) am Institut fuer Bergbau der TU Clausthal befasst sich in Lehre und Forschung mit der untertaegigen Gewinnung von festen mineralischen Rohstoffen. Mit dem Rueckgang und der Konzentration des deutschen Bergbaus hat sich der Lehrstuhl staerker dem Auslandsbergbau und allgemein der Erdkrustennutzung zugewandt. Der Gewinnungsbergbau findet seine Ergaenzung in der untertaegigen Nutzung von Hohlraeumen fuer Entsorgungszwecke und fuer Infrastrukturaufgaben. Dementsprechend ist das Studienangebot in Richtung Umweltschutz und Geotechnik erweitert worden. Insbesondere die Grundlagenforschung auf dem Gebiet des Entsorgungsbergbaus ist zu einem Forschungsschwerpunkt des Lehrstuhls geworden, nicht zuletzt aufgrund der Finanzierung aus oeffentlichen Mitteln. Lehre, Forschung und Weiterbildung decken heute den untertaegigen Gewinnungsbergbau, den Entsorgungsbergbau sowie die Sanierung von

Development, setup, and test of a new cryostat module for the S-DALINAC; Entwicklung, Aufbau und Test eines neuen Kryostatmoduls fuer den S-DALINAC

Energy Technology Data Exchange (ETDEWEB)

Kuerzeder, Thorsten

2013-07-01

Within the work presented here, a new cryostat-module for the superconducting injector accelerator of the S-DALINAC as well as three superconducting cavities have been designed and built. The aim of these efforts was an increase in energy behind the injector from 10 MeV to 14 MeV and in beam current from 60 μA to 250 μA. Such an upgrade in intensity required an increase of the input radio-frequency (RF) power from 500 W to 2 kW. For this purpose new RF power couplers had been designed at the Institut fuer Theorie elektromagnetischer Felder at the Technische Universitaet Darmstadt. In order to enable the use of these couplers a new cryostat-module with a WR-284 rectangular waveguide transition line through all pressure and temperature stages was developed within the work presented here. The new construction was designed following that of the standard cryostats of the S-DALINAC. Because the dimensions and adapters for the beam and insulating vacuum as well as the connections needed for helium and nitrogen supply of both cryostats agree, the present module can be simply replaced by the new one. For the WR-284 waveguide feed-through the tower section was redesigned to provide enough space for an assembly under clean-room conditions. The waveguide bellows, specially built for this project, show excellent RF properties and provide the flexibility needed for the transfer line. As an alternative to a cold vacuum window a special waveguide with diaphragms at an intermediate temperature has been developed in order to minimize losses due to heat radiation inside the waveguide. All waveguide components were tested for ultra-high-vacuum capability and their RF properties have been determined within this work. Within the process of the fabrication of the cryostat module the helium vessel was equipped with a significantly improved magnetic shielding. Final measurements inside the helium vessel showed an average value of 4 μT for the magnetic field at the positions of the

Use of process observers at sewage treatment plants; Einsatz von Prozessbeobachtern fuer Klaeranlagen

Energy Technology Data Exchange (ETDEWEB)

Jumar, U.; Alex, J. [Institut fuer Kommunikation und Automation e.V. Magdeburg (IFAK), Barleben (Germany); Rosenwinkel, K.H.; Obenaus, F. [Hannover Univ. (Germany). Inst. fuer Siedlungswasserwirtschaft und Abfalltechnik

1999-07-01

The paper describes the use of online simulation for prognosticating plant behaviour, training plant operators, and for obtaining state data not to be obtained otherwise. Whereas, for the mathematical modelling of the process, the established approaches Activated Sludge Model (ASM) 1 and 2 could be reverted to, new methodics needed to be developed for continuous model tracking in order to solve the conflict between a large number of parameters in the model and scarce online measuring data on the spot. The result is a practicable solution which harnesses available knowledge concerning the significance of suitable parameters for model adaptation. First of all, essential demands on and objectives of a process observer for sewage treatment plants are elaborated. Then a software system is described with reference to successful pilot installations which permits model-based process control and remote monitoring of sewage treatment plant. (orig.) [German] Der Beitrag beschreibt die Nutzung der Online-Simulation fuer die Prognose des Anlagenverhaltens, das Training der Anlagenfahrer und die Gewinnung ansonsten nicht messbarer Zustandsinformationen. Waehrend fuer die mathematische Modellierung des Prozesses auf die etablierten Ansaetze ASM 1 und 2 (Activated Sludge Model) zurueckgegriffen werden konnte, musste fuer die laufende Modellnachfuehrung eine neue Methodik entwickelt werden, um den Konflikt zwischen grosser Parameteranzahl im Modell und geringer Online-Messinformation vor Ort zu loesen. Das Ergebnis ist eine praktikable Loesung, die das vorhandene Wissen um die Signifikanz zur Modellanpassung geeigneter Parameter ausnutzt. In den folgenden Ausfuehrungen werden zunaechst wesentliche Anforderungen und Zielstellungen eines Prozessbeobachters fuer Klaeranlagen herausgearbeitet. Unter Bezugnahme auf erfolgreiche Pilotinstallationen wird anschliessend ein Software-System vorgestellt, das eine modellgestuetzte Betriebsfuehrung und Fernueberwachung von Klaeranlagen

Power electronics for local fuel cell/-battery plants; Leistungselektronik fuer dezentrale Brennstoffzellen/-Batterieanlagen

Energy Technology Data Exchange (ETDEWEB)

Krykunov, Oleksandr

2009-10-13

With their high efficiency and modular structure, fuel cells are an attractive option for decentral power supply. An important component of decentral power supply systems is the power-electronic control element for supply of electric power from the fuel cell to the three-phase electricity grid. Control elements can be constructed of a unidirectional DC/DC converter with a current inverter connnected in series. The investigation focused on the development of the DC/DC converter with minimum constructional and control requirements and optimum adaption of the DC/DC converter to the characteristics of the fuel cell. (orig.) [German] Die Brennstoffzelle stellt mit ihrem hohen Wirkungsgrad und ihrem modularen Aufbau eine attraktive Option fuer die Verwendung in einem dezentralen Energieversorgungssystem dar. Eine wichtige Komponente des dezentralen Energieversorgungssystems sind die leistungselektronischen Stellglieder fuer die Einspeisung der elektrischen Energie aus der Brennstoffzelle in das dreiphasige Netz. Die leistungselektronischen Stellglieder koennen aus einem undirektionalen DC/DC-Wandler und einem nachgeschalteten Wechselrichter realisiert werden. Die Entwicklung des DC/DC-Wandlers mit einem moeglichst geringeren Bauelemente- und Steuerungsaufwand fuer diese leistungselektronischen Stellglieder und die Anpassung des DC/DC-Wandlers an die Eigenschaften der Brennstoffzelle war das Ziel dieser Arbeit. (orig.)

Pleading for a rational energy policy; Fuer eine aufgeklaerte Energiepolitik

Energy Technology Data Exchange (ETDEWEB)

Tillessen, U. [Colenco Power Consulting AG, Baden (Switzerland)

1999-09-01

To the argument that the long half-life values of the most important products of fission represent an unacceptable burden for coming generations, the author retorts that this is an emotion-directed pseudo-argument. Anyone who ventures into deep geological strata, such as the final storage area Konrad, should also count in terms of geological periods. From this point of view, a million years - however difficult to imagine for the average human being - is not a very long time. Toxic chemical waste is accepted by society, even if the toxicity should remain for all time. The article is an extract from a lecture given by the author to the Franco-German Society for Science and Technology. (orig.) [German] Dem Argument, die langen Halbwertszeiten der wichtigsten Spaltprodukte beinhalte eine nicht zu verantwortende Belastung fuer die nachfolgenden Generationen, haelt Autor Tillessen entgegen, dass dies ein auf Emotionen abzielendes Scheinargument sei. Wer sich, wie zum Beispiel beim Endlager Konrad, in tiefe geologische Schichten begebe, duerfe auch in geologischen Zeitraeumen rechnen. Und da sei eine Million Jahre, so wenig vorstellbar das auch fuer den Durchschnitts-Menschen sei, eben keine allzulange Zeit. Chemische Giftabfaelle wuerden von der Gesellschaft akzeptiert, obwohl ihre Toxitaet ewig waehre. Der Beitrag des Autors ist ein Auszug aus einer Rede, die er vor der Deutsch-Franzoesischen Gesellschaft fuer Wissenschaft und Technik gehalten hat. Aus diesem Anlass hatte Tillessen vorgeschlagen, ein von einer Stiftung getragenes deutsch-franzoesisches Institut zu gruenden, dessen Aufgabe es sein soll, mit mehr Rationalitaet die von teutonischer Romantik dominierte Technikdiskussion zu versachlichen. (orig.)

Imaging of primary muscular diseases. What do neurologists expect from radiologists?; Bildgebung primaerer Muskelerkrankungen. Was erwartet der Neurologe vom Radiologen

Energy Technology Data Exchange (ETDEWEB)

Wattjes, M.P. [Medizinische Hochschule Hannover, Institut fuer Diagnostische und Interventionelle Neuroradiologie, Hannover (Germany); Fischmann, A. [Hirslanden Klinik St. Anna, Luzern (Switzerland); Fischer, D. [Universitaets-Kinderspital beider Basel, Abteilung fuer Neuropaediatrie, Basel (Switzerland)

2017-12-15

Imaging, in particular magnetic resonance imaging (MRI), has in recent years increasingly become a crucial tool for the diagnostics of inherited and acquired muscular diseases. The aim of imaging in neuromuscular disorders goes beyond the detection and quantification of degenerative muscular changes, such as fatty degeneration and includes recognition of very early signs of muscular pathologies presenting as muscular edema. Therefore, imaging is a valuable diagnostic method to support the clinical diagnosis and to narrow down the differential diagnoses, leading to specific additional diagnostic tests in order to establish the correct diagnosis. Although advances in MRI hardware and technology have led to a faster, more accurate and advanced image acquisition allowing whole body examination in a feasible fashion, the standardization of image acquisition and interpretation remains a challenge. The aim of this review article is to address the important and clinically relevant issues concerning the role of imaging of neuromuscular diseases in order to facilitate a good interdisciplinary management for the diagnostics and monitoring of neuromuscular diseases. (orig.) [German] Die Bildgebung, insbesondere die Magnetresonanztomographie (MRT), hat in den letzten Jahren zunehmend an Bedeutung fuer die Diagnostik angeborener und erworbener Muskelerkrankungen gewonnen. Die Bildgebung ist dabei nicht nur in der Lage, Muskeldegeneration (z. B. fettige Degeneration) zu erfassen und zu quantifizieren, sondern auch sehr fruehe Stadien von Muskelerkrankungen mit dem Nachweis von oedematoesen Muskelveraenderungen zu erkennen. Die Bildgebung ist somit eine wertvolle diagnostische Modalitaet, um die klinische Diagnose zu unterstuetzen, die Differenzialdiagnose einzugrenzen und somit eine zielgerichtete weiterfuehrende Diagnostik zu ermoeglichen. Obgleich die technischen Weiterentwicklungen, insbesondere der MRT, eine schnellere, genauere und erweiterte (z. B. Ganzkoerperuntersuchungen

A DICOM based PACS for nuclear medicine; Ein DICOM-basiertes PACS fuer die Nuklearmedizin

Energy Technology Data Exchange (ETDEWEB)

Lassmann, M.; Reiners, C. [Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

2002-02-01

The installation of a radiology information system (RIS) connected to a hospital information system (HIS) and a picture archiving and communications system (PACS) seems mandatory for a nuclear medicine department in order to guarantee a high patient throughput. With these systems a fast transmission of reports, images to the in- and out-patients' wards and private practitioners is realized. Therefore, since April 2000, at the department of nuclear medicine of the university of Wuerzburg a completely DICOM based PACS has been implemented in addition to the RIS. With this system a DICOM based workflow is realized throughout the department of nuclear medicine for reporting and archiving. The PACS is connected to six gamma-cameras, a PET scanner, a bone densitometry system and an ultrasound device. The volume of image data archived per month is 4 GByte. Patient demographics are provided to the modalities via DICOM-Worklist. With these PACS components a department specific archive purely based on DICOM can be realized. During the installation process problems occurred mainly because of the complex DICOM standard for nuclear medicine. Related to that is the problem that most of the software implementations still contain bugs or are not adapted to the needs of a nuclear medicine department (particularly for PET). A communication software for the distribution of nuclear medicine reports and images based on techniques used for the worldwide web is currently tested. (orig.) [German] Fuer eine nuklearmedizinische Klinik ist ein Klinikinformationssystem (KIS) gekoppelt mit einem Radiologieinformationssystem (RIS) sowie einem Bildarchivierungs- und Verteilungssystem (PACS) unabdingbar, um einen schnellen Patientendurchsatz sowie die zeitnahe Uebermittlung von Befunden inklusive nuklearmedizinischen Bildern an zuweisende Stationen, Ambulanzen und externe Zuweiser zu gewaehrleisten. Daher wurde im April 2000 an der Klinik und Poliklinik fuer Nuklearmedizin der Universitaet

Bundesanstalt fuer Martialforschung und -pruefung (BAM). Annual report 2001; Bundesanstalt fuer Materialforschung und -pruefung (BAM). Jahresbericht 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The volume reports the activities of the BAM, (Federal Office for Materials Research and Testing), and its departments for Analytical Chemistry/Reference Materials, Chemical Safety Engineering, Hazardous Materials Containment, Environmental Compatibility of Materials, Technology of Structural Materials, Polymers, Structural Stability and Safety, Materials Protection/Nondestructive Testing, and for Scientific-Technical Interdisciplinary Activities. (MM) [German] Der vorliegende Band berichtet ueber die Aktivitaeten der Bundesanstalt fuer Materialforschung und -pruefung und ihrer Abteilungen Analytische Chemie/Referenzmaterialien, Chemische Sicherheitstechnik, Gefahrgutumschliessungen, Umweltvertraeglichkeit von Materialien, Werkstofftechnik der Konstruktionswerkstoffe, Funktion von Polymeren, Bauwerkssicherheit, Materialschutz/Zerstoerungsfreie Pruefung und Technisch-wissenschaftliche Querschnittsfunktionen. (MM)

Adaptive real-time models of vehicle dynamics; Adaptive Echtzeitmodelle fuer die Kraftfahrzeugdynamik

Energy Technology Data Exchange (ETDEWEB)

Halfmann, C.; Holzmann, H.; Isermann, R. [Technische Univ. Darmstadt (Germany). Inst. fuer Automatisierungstechnik; Hamann, C.D.; Simm, N. [Opel (A.) AG, Ruesselsheim (Germany). Gruppe Chassis und Fahrerassistenzsysteme

1999-12-01

The application of modern simulation tools offering additional support during the vehicle development process is accepted to a large extent by most car manufacturers. Just like new model-based control strategies, these simulation investigations require very accurate - and thus very complex - models of vehicle dynamics, which can be processed in real time. As an example of such a vehicle model, this article describes a real-time vehicle simulation model which was developed at the Institute of Automatic Control at Darmstadt University of Technology, in co-operation with the ITDC of the Adam OPEL AG. By applying modern adaptation techniques, this vehicle model is able to calculate onboard the important variables describing the actual driving state even if the environmental conditions change. (orig.) [German] Der Einsatz von Simulationswerkzeugen zur Unterstuetzung der Fahrzeugentwicklung hat sich bei den meisten Automobilherstellern weitgehend durchgesetzt. Ebenso wie neuartige modellbasierte Regelstrategien verlangen diese Simulationsuntersuchungen nach immer exakteren - und damit komplexeren - fahrdynamischen Modellen, die in Echtzeit ausgewertet werden. Als Beispiel fuer ein solches Gesamtfahrzeugmodell beschreibt dieser Beitrag ein echtzeitfaehiges Modell fuer die Bewegung des Fahrzeugs um alle drei Hauptachsen, das am Institut fuer Automatisierungstechnik der TU Darmstadt in Kooperation mit dem Internationalen Technischen Entwicklungszentrum (ITEZ) der Adam Opel AG entwickelt wurde. Es ist durch den Einsatz von Adaptionsmethoden in der Lage, wichtige fahrdynamische Zustandsgroessen im Fahrzeug auch unter veraenderlichen Umgebungsbedingungen zu ermitteln. (orig.)

Communicating to gain public acceptance of energy projects; Akzeptanzkommunikation fuer Energieprojekte

Energy Technology Data Exchange (ETDEWEB)

Pust, M. [TECSOL GmbH, Friedeburg (Germany)

2014-07-01

Whoever plans to execute energy projects in today's world should be aware of the fact that the social framework conditions surrounding such projects have changed significantly. For the organization executing the project to merely adhere to the legally prescribed authorization procedure and leave it until the end of the planning procedure to inform those affected is often no longer sufficient for gaining public acceptance. Large parts of the population criticise the usual procedures because they have lost confidence in this kind of decision making, which offers them too little scope for co-determination. Thus for some years there has been a growing number of cases where citizens demand full public participation and early information on why the project in question is needed and what kinds of impact it will have. Lack of acceptance can lead to resistance, with negative effects on the project and the companies involved. TECSOL takes care of the communication management alongside energy projects, taking its bearings by the existing standards for voluntary early information of the public, as recommended by the VDI (Guideline 7001) and required by the legislature (PlVereinhG = Law for Improvement of Public Participation and Harmonisation of Plan Approval Procedures). The lecture outlines the societal challenges involved as well as the possibilities for dealing fairly with demands of the population in the context of energy projects. This is illustrated using the model case of the ''Etzel cultural landscape'' as a practical example, in which TECSOL played a prominent role on behalf of IVG Caverns GmbH. [German] Wer heute Energieprojekte umsetzen will, muss sich im Klaren darueber sein, dass sich die gesellschaftlichen Rahmenbedingungen stark veraendert haben. Es reicht fuer die Akzeptanz des Vorhabens haeufig nicht mehr aus, dass ein Vorhabentraeger den rechtlich vorgegebenen Weg des Genehmigungsprozesses beschreitet und die betroffenen Buerger erst

A TDC module used in nTOF of ICF

International Nuclear Information System (INIS)

Zhang Yuehua; Li Feng; Jin Ge; Yu Xiaoqi; Jiang Xiao

2007-01-01

Neutron time-of-flight (TOF) can provide important information about the fuel-ion burn temperature in various inertial-confinement-fusion (ICF) target designs. The sensitive neutron detector array is used to increase sensitivity while maintaining good time resolution for low-yield targets. It has been a standard technique to diagnose the average density-radius product(pR), which is a very important parameter in ICF experiments. The time resolution of the sensitive neutron detector array which will be used in 'Shen Guang III' system is expected to be 1 ns, and the one of the electronic system connected with the detectors is 100 ps. Based on the next generation of TDCs from ACAM, TDC-GP2, a VME-plug-in multi-chanel TDC module, with a time-resolution of less than 61 ps, has been designed. (authors)

Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2013/14

International Nuclear Information System (INIS)

2016-02-01

The annual report 2013/14 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) includes projects and key activities on the following issues: reactor safety, waste disposal, radiation protection, environmental protection and the support of foreign authorities and TSO. The project executing organizations, the governmental funding, share holding and subsidiaries are summarized.

Bayerisches Landesamt fuer Umweltschutz. 1997 annual report and abstracts of publications; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1997 und Kurzbeitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-08-01

The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [Deutsch] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

A transputer based high resolution TDC system for A1 experiment

International Nuclear Information System (INIS)

Geiges, R.; Merle, K.

1996-01-01

A multichannel TDC subsystem was designed and built at the Institute for Nuclear Physics at Mainz University. The subsystem is used for the readout of the vertical drift chambers (VDC) of the A1 experiment at the MAMI accelerator in Mainz. The system is based on a TDC ASIC chip called TDC 2001 and consists of several TDC modules housed in a VME-type crate. The TDC modules are controlled and read out by a transputer. The transputer can deliver the data through the transputer links to VME-systems, workstations, or PCs as data acquisition master

Solar building construction - new technologies; Solares Bauen - Neue Technologien fuer Gebaeude

Energy Technology Data Exchange (ETDEWEB)

Luther, J.; Voss, K.; Wittwer, V. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. ``Thermische und Optische Systeme``

1998-02-01

There is an increasing demand for integrated building concepts in order to reduce energy consumption. Building design, construction and heating, ventilation and air-conditioning (HVAC) technology are decisive in this respect. Thus, an essentially higher energy efficiency is achieved and solar energy becomes the main energy source. An `active building envelope` assumes the task of controlling the energy flows between inside and outside. This paper reports on new components, system concepts and planning tools for solar building. (orig.) [Deutsch] Fuer zukuenftige Bauten werden in hohem Masse Forderungen nach integrierten Konzepten zur Begrenzung des Energieverbrauchs gestellt. Gestalt, Konstruktion und Klimatechnik sind dabei massgebliche Einflussfaktoren. Hierdurch wird eine wesentlich hoehere Energieeffizienz erzielt und Solarenergie kann die uebrigen Energiequellen zurueckdraengen. Eine `aktive Gebaeudehuelle` uebernimmt die Aufgabe, den Energiefluss zwischen Innen und Aussen zu steuern. Der Beitrag berichtet ueber neue Komponenten, Systemkonzepte und Planungswerkzeuge fuer das Solare Bauen. (orig.)

Advertising campaign for natural gas vehicles is getting along; Werbung fuer Erdgasfahrzeuge kommt ins Rollen

Energy Technology Data Exchange (ETDEWEB)

Koerner, I. [me-gas, Projektgruppe Erdgasfahrzeuge, Berlin (Germany)

2002-10-01

Six students of the Berlin University of Arts developed a nationwide communication campaign for natural gas vehicles. The campaign is the first of its kind which is not restricted to industrial and commercial users. Apart from the innovative and unusual creations, it was the results of market research that created a sensation. [German] Sechs Studenten der Berliner Universitaet der Kuenste haben eine bundesweite Kommunikationskampagne fuer Erdgasfahrzeuge erarbeitet, die zum ersten Mal nicht nur die gewerblichen Vielfahrer ansprechen soll. Neben den ungewoehnlichen und zum Teil gewagten Kreationen waren es die Ergebnisse aus der Marktforschung, die fuer Ueberraschungen sorgten. (orig.)

How to promote solar power. Strategic application of consumer and environmental psychology; Fuer Solarenergie. Konsumenten- und Umweltpsychologie strategisch anwenden

Energy Technology Data Exchange (ETDEWEB)

Huebner, G. [Halle Univ. (Germany). Lehrstuhl fuer Sozial- und Organisationspsychologie; Felser, G. [Halle Univ. (Germany). Lehrstuhl fuer Differentielle Psychologie und Psychologische Diagnostik

2001-07-01

Why are solar systems still so few and far between? The book presents answers based on a systematic analysis of the psychological aspects of the decision, e.g. consumer needs and motives. 'Social Marketing' is presented as a differentiated outline concept for developing strategies for selling solar power. The book addresses solar and agenda initiatives, environmental organisations, communities and energy-minded citizens as well as students of environmental science and psychology. [German] Warum sind Solaranlagen noch immer so selten? Antworten auf diese Frage finden sich im Buch, in dem aus Sicht der Konsumenten- und Umweltpsychologie die psychologischen Facetten der Entscheidung fuer Solarenergie, z.B. - die Beduerfnisse und Motive der Konsumenten von Solaranlagen - die Wirkungen von Informationsmaterial auf die Kaufentscheidung, erstmals systematisch analysiert werden. Mit dem 'Sozialen Marketing' wird ein differenziertes Rahmenkonzept fuer die Gestaltung von Strategien fuer Solarenergie vorgestellt. Dieses Buch ist vor allem hilfreich fuer Solar- und Agendainitiativen, Umweltverbaende, Kommunen und energiebewusste Buerger, da es praxisnahe Informationen und Handlungsempfehlungen vermittelt. Es wendet sich aber auch an Studierende der Umweltwissenschaften und der Psychologie. Es bereichert die Diskussion ueber Solarenergie mit Argumenten, die der Komplexitaet des Themas Rechnung tragen. (orig.)

Development of a concept for sustainable agriculture in the Elbe wetlands of Niedersachsen; Konzeptentwicklung fuer eine nachhaltige Landbewirtschaftung in den niedersaechsischen Elbtalauen

Energy Technology Data Exchange (ETDEWEB)

Prueter, J. [Alfred Toepfer Akademie fuer Naturschutz (NNA), Schneverdingen (Germany); Horlitz, T.; Sander, A. [Arbeitsgemeinschaft Umweltplanung (ARUM), Hannover (Germany)

2000-07-01

Since late 1997, a cooperative project headed by Alfred Toepfer Akademie fuer Naturschutz has been investigating ''Models of conservation and its application in agriculture - goals, instruments and cost of sustainable, environment-friendly agriculture in the Elbe river valley in Niedersachsen''. The project receives funds in the context of the BMBF project ''Elbe river ecology''. Using the specific methods and tools of ecology, landscaping, agriculture and economics, the fundamentals for future interdisciplinary landscape development concepts will be established. The contribution presents the methodology of concept development and some exemplary goals for sustainable agricultural development in the context of the project. [German] Seit Ende 1997 widmet sich im Rahmen der BMBF-Forschungsfoerderung ''Elbe-Oekologie'' ein Verbundforschungsvorhaben unter Federfuehrung der Alfred Toepfer Akademie fuer Naturschutz dem Thema ''Leitbilder des Naturschutzes und deren Umsetzung mit der Landwirtschaft - Ziele, Instrumente und Kosten einer umweltschonenden und nachhaltigen Landwirtschaft im niedersaechsischen Elbetal''. Mit den spezifischen Methoden und fachlichen Instrumenten der Oekologie, der Landschaftsplanung sowie der Agrarwissenschaften einschliesslich Oekonomie sollen Grundlagen fuer moegliche ressortuebergreifend getragene Konzepte fuer die zukuenftige Landschaftsentwicklung erarbeitet werden. Im folgenden werden methodische Grundlagen der Konzeptentwicklung und beispielhafte Zielaussagen fuer eine nachhaltige Landbewirtschaftung aus dem laufenden Projekt vorgestellt. (orig.)

Meteorological systems for hydrological applications; Meteorologische Systeme fuer hydrologische Anwendungen

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

The development of hydrology with its many practical applications in water management has led to a great demand for hydrometeorological data, variables derived from meteorological measurements, and models. The report shows the many fields in which meteorological data are required in hydrology and water management. Measuring networks and methods are described and critically assessed, including remote measurement by radar and satellite. For the hydrologist, the most important variables to be derived are the regional precipitation and evaporation, each with the error source and size. Other factors of interest are the snowbreak, the expected maximum precipitation (rain), the statistical derivation of strong rain, and regionalisation methods for all variables derived. These methods are presented. The possibilities of meteorology, especially (WMO) in the field of data transmission systems are assessed. (orig./KW) [Deutsch] Die Entwicklung der Hydrologie mit ihren zahlreichen wasserwirtschaftlichen Anwendungen hat zu einem grossen Bedarf an hydrometeorologischen Daten, aus meteorologischen Messungen abgeleiteten Groessen und auch an Modellen gefuehrt. Wo ueberall sich ein Bedarf an meteorologischen Daten in Hydrologie und Wasserwirtschaft eingestellt hat, ist in diesem Bericht zusammengefasst. Es werden die verschiedenen Messnetze und Messverfahren beschrieben und kritisch beurteilt, auch die Radar- und Satellitenfernerkundung gehoeren dazu. Fuer den Hydrologen zaehlt zu den wichtigsten abgeleiteten Groessen der Gebietsniederschlag und die Gebietsverdunstung, jeweils mit Angabe von Fehlerquelle und Fehlerschwankung. Von Interesse sind auch die Schneeschmelze, der vermutlich maximale Niederschlag (Regen), die statistische Ableitung von Starkregen und Regionalisierungsmethoden aller abgeleiteten Groessen. Diese Verfahren werden vorgestellt. Die quantitative Niederschlagsvorhersage wird wegen ihrer Bedeutung fuer die operationellen hydrologischen Vorhersagen eingehend

Magnetic resonance imaging of pulmonary perfusion. Technical requirements and diagnostic impact; MRT der Lungenperfusion. Technische Voraussetzungen und diagnostischer Stellenwert

Energy Technology Data Exchange (ETDEWEB)

Attenberger, U.I.; Buesing, K.; Schoenberg, S.O.; Fink, C. [Klinikum Mannheim der Universitaet Heidelberg, Institut fuer Klinische Radiologie und Nuklearmedizin, Universitaetsmedizin Mannheim, Mannheim (Germany); Ingrisch, M.; Reiser, M. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Institut fuer Klinische Radiologie, Campus Grosshadern, Muenchen (Germany)

2009-08-15

With technical improvements in gradient hardware and the implementation of innovative k-space sampling techniques, such as parallel imaging, the feasibility of pulmonary perfusion MRI could be demonstrated in several studies. Dynamic contrast-enhanced 3D gradient echo sequences as used for time-resolved MR angiography have been established as the preferred pulse sequences for lung perfusion MRI. With these techniques perfusion of the entire lung can be visualized with a sufficiently high temporal and spatial resolution. In several trials in patients with acute pulmonary embolism, pulmonary hypertension and airway diseases, the clinical benefit and good correlation with perfusion scintigraphy have been demonstrated. The following review article describes the technical prerequisites, current post-processing techniques and the clinical indications for MR pulmonary perfusion imaging using MRI. (orig.) [German] Mit der Verfuegbarkeit leistungsfaehiger Gradientensysteme und schneller k-Raum-Akquisitionstechniken wie der parallelen Bildgebung konnten verschiedene Studien die Machbarkeit der Lungenperfusionsbildgebung in der MRT zeigen. In der Praxis haben sich dynamische kontrastverstaerkte 3D-Gradientenechosequenzen, wie sie fuer zeitaufgeloeste MR-Angiographien verwendet werden, fuer die Bildgebung der Lungenperfusion etabliert. Hiermit ist es moeglich, die Perfusion der gesamten Lunge mit ausreichend hoher zeitlicher und raeumlicher Aufloesung zu visualisieren. In mehren klinischen Studien konnte bei Patienten mit Lungenembolie, pulmonaler Hypertonie sowie Erkrankungen der Atemwege und des Lungenparenchyms der klinische Nutzen der Lungenperfusions-MRT und die gute Uebereinstimmung mit der Lungenperfusionsszintigraphie nachgewiesen werden. Der folgende Uebersichtsartikel beschreibt die technische Durchfuehrung, Bildnachverarbeitung und die klinischen Anwendungsgebiete der MRT zur Untersuchung der Lungenperfusion. (orig.)

Range extender module. Enabler for electric mobility; Range-Extender-Modul. Wegbereiter fuer elektrische Mobilitaet

Energy Technology Data Exchange (ETDEWEB)

Fischer, Robert; Fraidl, Guenter Karl; Hubmann, Christian; Kapus, Paul Ernst; Kunzemann, Ralf; Sifferlinger, Bernhard; Beste, Frank [AVL List GmbH, Graz (Austria)

2009-10-15

The Range Extender as an auxiliary power supply for extended driving ranges is of significant importance in achieving a high level of customer acceptance for electric vehicles. The AVL concept is optimized for electric power generation in single-point operation and allows a compactly integrated, cost-efficient and weight-efficient module design. The internal combustion engine requirements of the Pure Range Extender from AVL permit not only the use of simplified four-stroke concepts but also the application of emission-optimized and fuel consumption-optimized two-stroke and rotary piston engines. (orig.)

ISH. HVAC engineering yearbook 1999; ISH. Jahrbuch fuer Gebaeudetechnik 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

The 1999 HVAC engineering yearbook contains contributions on energy conservation and optimization in the fields of ventilation and air conditioning: inter alia, solar cooling and air conditioning, optimum rating of ventilator units, and cooling ceilings with ventilation function. In the field of heating, the following topics are addressed, equally under the aspect of energy conservation: condensing boiler technology, hydraulic balancing of heating pipe systems and sequential boiler switching using fuzzy control. Further works deal with rational use of electricity in buildings, and building automation. 17 papers are individually listed in the Energy database. [Deutsch] Das Jahrbuch fuer Gebaeudetechnik 1999 enthaelt Beitraege zur Energieeinsparung und Optimierung auf den Gebieten Lueftung und Klimatisierung, u. a. solare Kuehlung und Klimatisierung, optimale Auslegung von Ventilator-Aggregaten und Kuehldecken mit Lueftungsfunktion. Auf dem Gebiet der Heizung werden ebenfalls unter dem Gesichtspunkt Energieeinsparung die Brennwerttechnologie, der hydraulische Abgleich von Heizungsrohrnetzen sowie Kesselfolgeschaltungen mit Fuzzy Control angesprochen. Weitere Arbeiten befassen sich mit der rationellen Elektrizitaetsverwendung in Geb auden sowie der Gebaeudeautomation. Fuer die Datenbank Energy wurden 17 Arbeiten separat aufgenommen.

Groundwater monitoring programme. A guide for groundwater sampling and analysis. 2. ed.; Grundwasserueberwachungsprogramm. Leitfaden fuer Probenahme und Analytik von Grundwasser

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Quality assurance guidelines have been developed and introduced in Baden-Wuerttemberg for groundwater monitoring. The contribution contains the fundamentals and technical guides for sampling and measurement of the Baden-Wuerttemberg groundwater monitoring programme, as well as parameter groups and a preliminary assessment of the methods. [German] Bei der Gewinnung von Umweltdaten sind hohe Anforderungen an die Qualitaet der erhobenen Daten zu stellen. Dies trifft in besonderem Masse gerade auch fuer Grundwasseruntersuchungen zu, da hier haeufig Konzentrationen im Bereich der Nachweisgrenze auftreten. Fuer das Grundwassermessnetz Baden-Wuerttemberg sind qualitaetssichernde Regelungen entwickelt und eingefuehrt worden. In der vorliegenden Zusammenstellung sind die Grundsatzpapiere, bzw. Technischen Anleitungen aus dem Grundwasserueberwachungsprogramm Baden-Wuerttemberg fuer die Grundwasserprobennahme sowie zu Messverfahren, Parametergruppen und zur ersten Beurteilung der Messergebnisse enthalten. (orig.)

Good organization is essential for success. Pt. 1. Energy management for commercial buildings.; Eine gute Organisation ist Voraussetzung fuer den Erfolg. T. 1. Energiemanagement fuer die Gebaeudetechnik.

Energy Technology Data Exchange (ETDEWEB)

Rader, Michael [CentraLine c/o Honeywell, Schoenaich (Germany)

2013-07-15

Energy costs caused by heating, ventilation, air-conditioning and lighting systems, represent a significant portion of the total operating costs of a building. continuously rising prices of gas, oil and electricity increase the cost pressure on the building operators and users: energy efficiency is becoming a major factor for the competitiveness of a company. In the manufacturing sector, trade and hotel the energy costs have a direct impact on the company's margins. Thus, the willingness to invest in energy saving measures increased. [German] Energiekosten, verursacht durch Heizungs-, Lueftungs-, Klima- und Beleuchtungsanlagen, stellen einen signifikanten Anteil der Gesamtbetriebskosten eines Gebaeudes dar. Kontinuierlich steigende Preise fuer Gas, Oel und Elektrizitaet erhoehen den Kostendruck auf die Gebaeudebetreiber und -nutzer: Energieeffizienz wird zu einem bestimmenden Faktor fuer die Wettbewerbsfaehigkeit eines Unternehmens. Im produzierenden Gewerbe, im Handel und im Hotelgewerbe haben Energiekosten einen direkten Einfluss auf die Margen des Unternehmens. Dadurch erhoeht sich die Bereitschaft, in Energiesparmassnahmen zu investieren.

The Rossendorf research site. The Rossendorf Research Center (FZR). The Rossendorf Verein fuer Kernverfahrenstechnik und Analytik (VKTA). The Rossendorf Foerderverein fuer Wissenschaft, Forschung und Technologie (ROTECH)

International Nuclear Information System (INIS)

1995-01-01

The illustrated brochure presents the Rossendorf research site at a glance. There are two major new establishments, the Rossendorf Research Center and the Verein fuer Kernverfahrenstechnik und Analytik Rossendorf (VKTA), whose main activities cover basic research and tasks in the field of nuclear facilities decommissioning and radwaste management on site. (DG) [de

A bunch clock for the Advanced Photon Source

International Nuclear Information System (INIS)

Lenkszus, F.R.; Laird, R.J.

1997-01-01

A bunch clock timing module has been developed for use by Advanced Photon Source beamlines. The module provides bunch pattern and timing information that can be used to trigger beamline data collection equipment. The module is fully integrated into the control system software (EPICS) which automatically loads it with the storage ring fill pattern at injection time. Fast timing outputs (1 ns FWHM) for each stored bunch are generated using the storage ring low-level rf and revolution clock as input references. Fiber-optic-based transmitters and receivers are used to transmit a 352-MHz low-level rf reference to distributed bunch clock modules. The bunch clock module is a single-width VME module and may be installed in a VME crate located near beamline instrumentation. A prototype has been in use on the SRI CAT beamline for over a year. The design and integration into the control system timing software along with measured performance results are presented

A comparison of three different types of collectors for process heat uses; Vergleich von drei verschiedenen Kollektortypen fuer Prozesswaermeanwendungen

Energy Technology Data Exchange (ETDEWEB)

Brunold, S. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland); Frey, R. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland); Frei, U. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland)

1995-12-31

A comparison of the measured and simulated values of three collector types shows that evacuated tube collectors are superior to transparent-insulation flat collectors in the case of high-temperature uses. At temperatures of 150 C and above good results were obtained using evacuated tube collectors with compound parabolic concentrators manufactured by Microtherm. CORTEC collectors are suited for temperatures in the range of 100 C to 150 C provided that the surface ratio is irrelevant. Costs play a decisive role when selecting systems. The results obtained show that improved transparent-insulation flat collectors can compete with evacuated tube collectors in the 100 C to 150 C temperature range. (orig.) [Deutsch] Ein Vergleich der gemessenen und simulierten Werte der drei Kollektoren zeigt, dass die Vakuumroehrenkollektoren fuer den Einsatz in Hochtemperaturanwendungen dem mit transparenter Waermedaemmung isolierten Flachkollektor ueberlegen sind. Der Vakuumroehrenkollektor mit CPC von Microtherm erzielt gute Resultate ab 150 C und mehr. Wogegen der CORTEC-Kollektor fuer den Einsatz im Temperaturbereich zwischen 100 C und 150 C geeignet ist, solange das Flaechenverhaeltnis keine Rolle spielt. Wie fuer die meisten Anwendungen spielen die Kosten eine entscheidende Rolle fuer die Wahl des eingesetzten Systems. Die Resultate zeigen, dass ein verbesserter mit TWD ausgeruesteter Flachkollektor im Temperaturbereich von 100 C bis 150 C konkurrenzfaehig zu Vakuumroehrenkollektoren sein kann. (orig.)

Environmental criteria for building site selection; Umweltkriterien bei der Standortsuche fuer Bauvorhaben

Energy Technology Data Exchange (ETDEWEB)

Locher, B [Umweltbundesamt, Berlin (Germany)

1995-09-01

The author of the present paper provides information on the application of ecological standards as part of the regulation of development planning. (HW) [Deutsch] Die Autorin gibt in ihrem Vortrag Hinweise auf die Anwendung von oekologischen Standards als Regelungsbestandteile fuer die Bauleitplanung. (HW)

RHIC control system

Energy Technology Data Exchange (ETDEWEB)

Barton, D.S. E-mail: dsbarton@bnl.gov; Binello, S.; Buxton, W.; Clifford, T.; D' Ottavio, T.; Hartmann, H.; Hoff, L.T.; Katz, R.; Kennell, S.; Kerner, T.; Laster, J.; Lee, R.C.; Marusic, A.; Michnoff, R.; Morris, J.; Oerter, B.R.; Olsen, R.; Piacentino, J.; Skelly, J.F

2003-03-01

The RHIC control system architecture is hierarchical and consists of two physical layers with a fiber-optic network connection. The Front-End Level systems consist of VME chassis with processors running a real-time operating system and both VME I/O modules and remote bus interfaces. Accelerator device software interfaces are implemented as objects in C++. The network implementation uses high speed, switched Ethernet technology. Specialized hardware modules were built for waveform control of power supplies, multiplexed signal acquisition, and timing services. The Console Level systems are Unix workstations. A strong emphasis has been given to developing highly reusable, standard software tools for use in building physics and diagnostic application software.

RHIC control system

International Nuclear Information System (INIS)

Barton, D.S.; Binello, S.; Buxton, W.; Clifford, T.; D'Ottavio, T.; Hartmann, H.; Hoff, L.T.; Katz, R.; Kennell, S.; Kerner, T.; Laster, J.; Lee, R.C.; Marusic, A.; Michnoff, R.; Morris, J.; Oerter, B.R.; Olsen, R.; Piacentino, J.; Skelly, J.F.

2003-01-01

The RHIC control system architecture is hierarchical and consists of two physical layers with a fiber-optic network connection. The Front-End Level systems consist of VME chassis with processors running a real-time operating system and both VME I/O modules and remote bus interfaces. Accelerator device software interfaces are implemented as objects in C++. The network implementation uses high speed, switched Ethernet technology. Specialized hardware modules were built for waveform control of power supplies, multiplexed signal acquisition, and timing services. The Console Level systems are Unix workstations. A strong emphasis has been given to developing highly reusable, standard software tools for use in building physics and diagnostic application software

Bundesamt fuer Strahlenschutz (BfS). Annual report 1991

International Nuclear Information System (INIS)

1992-08-01

The progress report submitted by Bundesamt fuer Strahlenschutz reveals that this federal radiation protection agency is not only entrusted with the fulfillment of the federal administrative tasks imposed by law but engages in applications-oriented research regarding the operational, metrological and health-related aspects of radiation protection, regarding nuclear safety and radioactive waste management. In addition, BfS takes care of public-relations tasks. The reports submitted by the BfS departments are completed by summaries of the main research results. (DG) [de

Applied chemistry and environmental engineering for engineers. Manual for students and practicians. 2. ed.; Angewandte Chemie und Umwelttechnik fuer Ingenieure. Handbuch fuer Studium und betriebliche Praxis

Energy Technology Data Exchange (ETDEWEB)

Fessmann, J.; Orth, H.

2002-07-01

This is a practically oriented textbook for chemistry and environmental protection training of students of mechanical engineering, vehicle engineering, electrical engineering, space HVAc engineering etc. Students are also given useful information on the practical applications of chemistry and on environmental protection in industrial practice. The book also contains problem solutions for managing engineers in organizations of the metal and electrical branch who are confronted with chemical problems in chemical engineering, quality assurance, industrial safety and environmental protection. [German] Das Handbuch vermittelt in konzentrierter Form die Grundlagen der Chemie und Umwelttechnik und schlaegt rasch die Bruecke zur industriellen Anwendung bevorzugt in der Metall- und Elektroindustrie. Das Handbuch ist ein praxisorientiertes Lehrbuch fuer die Chemie- und Umweltschutzausbildung von Ingenieurstudenten der Fachrichtungen Maschinenbau, Fahrzeugtechnik, Elektrotechnik, Versorgungstechnik u.a. Darueberhinaus finden Schueler von Chemieleistungskursen an Gymnasien oder Chemiestudenten an Fachhochschulen oder Universitaeten viele nuetzliche Informationen ueber die Anwendungen von Chemie und Umweltschutz in der industriellen Praxis. Nicht zuletzt enthaelt das Buch Problemloesungen fuer Betriebsingenieure, insbesondere aus dem Bereich der Metall- und Elektrobranche, die mit chemischen Fragestellungen in der Verfahrenstechnik, Qualitaetssicherung oder Arbeits-/Umweltschutzueberwachung konfrontiert sind. (orig.)

First robotized assembly line in for multivalve cylinder heads in Europe; Erste roborterautomatisierte Montagelinie fuer Mehrventilzylinderkoepfe in Europa

Energy Technology Data Exchange (ETDEWEB)

Simonis, G. [ABB Flexible Automation GmbH, Langenfeld (Germany)

1996-12-31

From its earliest days the automotive industry has pioneered the automation of factory operations. This reputation is being added to by yet another new development in the assembly area. The trendsetter is ABB Flexible Automation GmbH, based in Butzbach, Germany, which has developed a future-oriented concept for vehicle engine assembly in which jointed-arm robots play a key role. The new concept has been adopted for Europe`s first robotized assembly line for multivalve cylinder heads, installed by ABB for the German carmaker Audi in Gyoer, Hungary. (orig.) [Deutsch] Die Automobilindustrie war und ist Vorreiter in der Automatisierung betrieblicher Ablaeufe. Einmal mehr zeigt sich dies im Montagebereich. Trendsetter ist hier die ABB Flexible Automation GmbH, Butzbach/Deutschland, die fuer die Montage von Fahrzeugaggregaten ein zukunftweisendes Konzept entwickelt hat. Gelenkarmroboter spielen dabei eine entscheidende Rolle. Ein Beispiel dafuer: Die erste roboterautomatisierte Montageanlage fuer Mehrventilzylinderkoepfe in Europa, die ABB fuer den Automobilhersteller Audi im ungarischen Gyoer realisiert hat. (orig.)

Combined expander-compressor for carbon dioxide in free piston design; Kombinierte Expansions-Kompressions-Maschine fuer Kohlendioxid in Freikolbenbauweise

Energy Technology Data Exchange (ETDEWEB)

Heyl, P.; Quack, H. [TU, Dresden (Germany). Lehrstuhl fuer Kaelte- und Kryotechnik; Kuehne, M. [TU, Dresden (Germany). Lehrstuhl fuer Pumpen, Verdichter und Apparate

2000-03-01

The renaissance of carbon dioxide in refrigeration engineering is impressive. The contribution shows that the disadvantages of this refrigerating fluid can be compensated by modifying the refrigeration circuit. A combined expander-compressor working by the free piston principle and developed at Dresden Technical University is described. [German] Kohlendioxid erlebt im Bereich der Kaeltetechnik infolge der schwierigen Suche nach umweltvertraeglichen Ersatzkaeltemitteln fuer die Fluorchlorkohlenwasserstoffe eine beeindruckende Renaissance. Es soll anhand thermodynamischer Prozessberechnungen gezeigt werden, dass durch die Modifikation des Kreisprozesses unter Beachtung der besonderen thermodynamischen Eigenschaften des Kohlendioxids diese Nachteile bereits bei der theoretischen Leistungszahl ausgeglichen werden koennen. Dafuer wird das Kohlendioxid in einem Prozess mit zweistufiger Verdichtung arbeitsleistend entspannt. Die Besonderheit dieses Prozesses ist die Verwendung einer speziell fuer diesen Anwendungsfall entwickelten Maschine, die die gewonnene Expansionsarbeit direkt fuer die Verdichtung des Kohlendioxids in der zweiten Verdichtungsstufe nutzt. Es handelt sich dabei um eine nach dem Freikolbenprinzip arbeitende Expansions-Kompressions-Maschine, die an der TU Dresden entwickelt und gegenwaertig getestet wird. (orig.)

Solar thermal power plants for the Mediterranean region: A chance for a new era in the field of electricity supply; Solarthermische Kraftwerke fuer den Mittelmeerraum: Chance fuer eine neue Aera der Elektrizitaetsversorgung

Energy Technology Data Exchange (ETDEWEB)

Nitsch, J [DLR, Stuttgart (Germany)

1994-12-31

One promising option for a really environmentally and climaticly friendly electricity supply is the erection of solar thermal power plants in regions of the earth with a considerably high solar irradiation. In this work the technical and economical chances for this technology are analysed and explanations are given as to which energetic and econmic marginal conditions must be created for a successful market introduction, which could already be initiated with several demonstration power plants. (orig.) [Deutsch] Eine der vielversprechenden Optionen fuer wirklich umwelt- und klimafreundliche Elektrizitaetsversorgung stellt der Bau solarthermischer Kraftwerke in den einstrahlungsreichen Regionen der Erde dar. Der Beitrag analysiert die technisch-oekonomischen Chancen dieser Technologie und zeigt auf, welche energiewirtschaftlichen Randbedingungen als Voraussetzung fuer eine erfolgreiche Markteinfuehrung geschaffen werden muessen, die schon jetzt mit einer Reihe von Demonstrationskraftwerken beginnen koennte. (orig.)

A New Flying Wire System for the Tevatron

Science.gov (United States)

Blokland, Willem; Dey, Joseph; Vogel, Greg

1997-05-01

A new Flying Wires system replaces the old system to enhance the analysis of the beam emittance, improve the reliability, and handle the upcoming upgrades of the Tevatron. New VME data acquisition modules and timing modules allow for more bunches to be sampled more precisely. The programming language LabVIEW, running on a Macintosh computer, controls the VME modules and the nuLogic motion board that flies the wires. LabVIEW also analyzes and stores the data, and handles local and remote commands. The new system flies three wires and fits profiles of 72 bunches to a gaussian function within two seconds. A new console application operates the flying wires from any control console. This paper discusses the hardware and software setup, the capabilities and measurement results of the new Flying Wires system.

Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2010/2011

International Nuclear Information System (INIS)

2011-01-01

The annual report 2010/11 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) covers the following topics: organization, corporate development and public relations; reactor accident in Fukushima; Projects and work priorities (reactor safety; waste management; radiation and environmental protection; international projects); project management and project support; equity participations and subsidiaries (RISKAUDIT IRSN/GRS International; institute for safety technologies (ISTec), European Nuclear Safety Training and Tutoring Institute (ENSTTI)).

A 96-channel FPGA-based Time-to-Digital Converter (TDC) and fast trigger processor module with multi-hit capability and pipeline

International Nuclear Information System (INIS)

Bogdan, Mircea; Frisch, Henry; Heintz, Mary; Paramonov, Alexander; Sanders, Harold; Chappa, Steve; DeMaat, Robert; Klein, Rod; Miao, Ting; Wilson, Peter; Phillips, Thomas J.

2005-01-01

We describe an field-programmable gate arrays based (FPGA), 96-channel, Time-to-Digital converter (TDC) and trigger logic board intended for use with the Central Outer Tracker (COT) [T. Affolder et al., Nucl. Instr. and Meth. A 526 (2004) 249] in the CDF Experiment [The CDF-II detector is described in the CDF Technical Design Report (TDR), FERMILAB-Pub-96/390-E. The TDC described here is intended as a further upgrade beyond that described in the TDR] at the Fermilab Tevatron. The COT system is digitized and read out by 315 TDC cards, each serving 96 wires of the chamber. The TDC is physically configured as a 9U VME card. The functionality is almost entirely programmed in firmware in two Altera Stratix FPGAs. The special capabilities of this device are the availability of 840MHz LVDS inputs, multiple phase-locked clock modules, and abundant memory. The TDC system operates with an input resolution of 1.2ns, a minimum input pulse width of 4.8ns and a minimum separation of 4.8ns between pulses. Each input can accept up to 7 hits per collision. The time-to-digital conversion is done by first sampling each of the 96 inputs in 1.2-ns bins and filling a circular memory; the memory addresses of logical transitions (edges) in the input data are then translated into the time of arrival and width of the COT pulses. Memory pipelines with a depth of 5.5μs allow deadtime-less operation in the first-level trigger; the data are multiple-buffered to diminish deadtime in the second-level trigger. The complete process of edge-detection and filling of buffers for readout takes 12μs. The TDC VME interface allows a 64-bit Chain Block Transfer of multiple boards in a crate with transfer-rates up to 47Mbytes/s. The TDC module also produces prompt trigger data every Tevatron crossing via a deadtimeless fast logic path that can be easily reprogrammed. The trigger bits are clocked onto the P3 VME backplane connector with a 22-ns clock for transmission to the trigger. The full TDC design and

Integration of 128 channels for monitoring, acquisition and control with existing LHCD DAC system

International Nuclear Information System (INIS)

Joshi, Ramesh; Virani, Chetan; Wadhwani, Archana; Sharma, P.K.

2015-01-01

Lower Hybrid Current Drive (LHCD) data acquisition system needs to be upgraded for additional channel requirement. The existing VME based DAC has been used since long with 32 analog input channels for data monitoring and control. Additional 128 channels require integrating with existing DAC. There are four layers of waveguides which deliver final output power into tokamak. Each layer requires 32 channels for power measurement. For the same requirement 128 analog input channels have been integrated with the help of carrier board and IP modules. Acromag IP330 modules have been procured and finally integrated with additional carrier board with existing VME hardware. Each module provides 32 analog input channels. Device driver has been developed for each module and integrated with existing program. LHCD DAC system has been upgraded with additional 128 channels requirement. It has been successfully testing with recent SST-1 campaign. (author)

The stuff of enlightening diagnoses; Stoff fuer erhellende Diagnosen

Energy Technology Data Exchange (ETDEWEB)

Huebner, Karl

2017-07-01

Doctors today already frequently rely on positron emission tomography - PET for short - in cancer diagnostics. However, in order to use this method for other diseases, too, they need suitable tracer substances containing radioactive fluorine-18 - a challenge for Tobias Ritter and his team at the Max Planck Institut fuer Kohlenforschung in Muelheim an der Ruhr. The chemists are searching for ways to label diverse molecules with fluorine-18 and thus expand the range of possibilities for medical specialists.

Driver assistance - Firstly a contribution to primary safety or rather to comfort?; Fahrerassistenz primaer zum Komfort oder fuer die Sicherheit?

Energy Technology Data Exchange (ETDEWEB)

Bubb, H. [TU Muenchen, Garching (Germany). Lehrstuhl fuer Ergonomie

2003-07-01

Doubtless assistance systems should contribute to the safety of car driving. They support simultaneously a comfortable use of the car. Especially the operation comfort is characterised by clarity, self explaining, robustness against errors, and so on. Operation comfort doesn't give an inessential contribution to a reliable and appropriate interaction between driver and vehicle that means also a contribution to a reliable function of the total system and thereby to safety. Therefore the subjective experience of assistance systems is of excellent importance with view on the subjective and public confidence in new assistance systems. Are they seen rather as a gain of comfort, as it is preferred by the producer by reasons of production related liability, or as an easing of the driver's behaviour providing safety? Consists in the last called tendency a new kind of danger? In this connection juristic problems may not be unmentioned. The driver may not or not completely be called to account for procedures on which he has no influence or thinks to have no influence. In this case the account for the not compensated damage is contributed to the producer of the system. Therefore, by considering human characteristics and abilities of the driver during the development of assistance systems unwanted juristic consequences should be prevented. (orig.) [German] Assitenzsysteme sollen zweifellos einen Beitrag fuer die Sicherheit des Autofahrers liefern. Zugleich dienen sie aber auch fuer eine komfortable Nutzung des Fahrzeugs. Speziell der Bedienkomfort ist durch leichte Verstaendlichkeit, Selbsterklaerbarkeit, Fehlerrobustheit u.ae. charakterisiert. Durch ihn wird ein nicht unwesentlicher Beitrag zur sicheren und zweckdienlichen Interaktion zwischen Fahrer und Fahrzeug geleistet, also auch ein Beitrag fuer die zuverlaessige Funktion des Systems und damit fuer die Sicherheit. Von herausragender Bedeutung insbesondere im Hinblick auf das subjektive und das oeffentliche

Energy price report for Baden-Wuerttemberg 2016. Final report; Energiepreisbericht fuer Baden-Wuerttemberg 2016. Endbericht

Energy Technology Data Exchange (ETDEWEB)

Guel, Sarah; Cherkasky, Jenny

2017-05-19

This report describes the historical development of energy prices in recent years up to and including 2016 in Germany and Baden-Wuerttemberg and estimates the future development until 2023. The report addresses the markets for oil, gas, electricity and heat, which are summarized below. In addition, an estimate of the energy costs for households and industry and the associated burden is made. [German] Der vorliegende Bericht beschreibt die historische Entwicklung der Energiepreise der letzten Jahre bis einschliesslich 2016 in Deutschland und in Baden-Wuerttemberg und schaetzt die zukuenftige Entwicklung bis 2023 ab. Dabei geht der Bericht auf die Maerkte fuer Oel, Gas, Strom und Waerme ein, welche im Folgenden zusammengefasst werden. Zudem wird eine Abschaetzung der Energiekosten fuer Haushalte und Industrie und der damit verbundenen Belastung vorgenommen.

Construction of a FASTBUS data-acquisition system for the ELAN experiment. Aufbau eines FASTBUS-Datenerfassungssystems fuer das ELAN-Experiment

Energy Technology Data Exchange (ETDEWEB)

Noel, A.

1992-06-01

To use the FASTBUS data acquisition system for the experiment ELAN at the electron stretcher accelerator ELSA a new software tool has been developed. This tool manages to readout parallel CAMAC with a VME front-end-processor and FASTBUS with the special FASTBUS processor segment AEB. Both processors are connected by a 32 bit high speed VSB data bus. (orig.).

EPICS Input/Output Controller (IOC) application developer's guide. APS Release 3.12

International Nuclear Information System (INIS)

Kraimer, M.R.

1994-11-01

This document describes the core software that resides in an Input/Output Controller (IOC), one of the major components of EPICS. The basic components are: (OPI) Operator Interface; this is a UNIX based workstation which can run various EPICS tools; (IOC) Input/Output Controller; this is a VME/VXI based chassis containing a Motorola 68xxx processor, various I/O modules, and VME modules that provide access to other I/O buses such as GPIB, (LAN), Local Area Network; and this is the communication network which allows the IOCs and OPIs to communicate. Epics provides a software component, Channel Access, which provides network transparent communication between a Channel Access client and an arbitrary number of Channel Access servers

Photovoltaic systems. A guide for electricians, roofers, projecting engineers and architects; Photovoltaische Anlagen. Leitfaden fuer Elektriker, Dachdecker, Fachplaner, Architekten und Bauherren

Energy Technology Data Exchange (ETDEWEB)

Haselhuhn, R.; Berger, F.; Hasenoehrl, G.; Morsch, R.; Quaschning, V.; Rauscher, S.; Seltmann, T.; Hartmann, U.

2001-07-01

can-polluting and sustainable power supply will rely heavily on photovoltaic systems. Experience has shown that the development of PV systems cannot be assured without careful, high-quality planning dimensioning, installation, commissioning and maintenance. This guide contains comprehensive information on all aspects of PV systems. It addresses architects, projecting engineers, builder-owners, electricians and roofers, as well as decision-makers on state and community level with the intention of informing them on the latest state of the art. Contents: 1. Functional principles, design, characteristics and properties of components, modules and current inverters; 2. in situ analysis and site analysis; 3. shading analysis; 4. Optimal planning, dimensioning and design; 5. simulation programmes; 6. installation, commissioning, failure detection and maintenance; 7. assembly systems and integration options; 8. funding programmes. To facilitate updating, the book is in the form of a loose-leaf collection. [German] Fuer eine klimavertraegliche und nachhaltige zukuenftige Energieversorgung Deutschlands ist der massive Ausbau der Photovoltaik unabdingbar. Die Rahmenbedingungen fuer einen solchen Ausbau sind geschaffen, der Markt befindet sich zur Zeit im Umbruch. In Deutschland werden von einem solchen Ausbau in erster Linie netzgekoppelte PV-Anlagen betroffen sein. Die Erfahrungen mit der Performance solcher Anlagen (1.000-Daecher-Programm, Programm Sonne in der Schule, Schweizer Foerderprogramm etc.) haben allerdings gezeigt, dass ohne eine sorgfaeltige und auf hohem Niveau stehende Planung, Dimensionierung, Installation, Inbetriebnahme und Wartung der optimale Ertrag und damit der Beitrag zum Klimaschutz nicht gewaehrleistet werden kann. Aus diesen Gruenden ist es notwendig und sinnvill, Architekten, Planern, Bauherren, Installationsbetrieben (sowohl Elektrikern als auch Dachdeckern) und last but not least den Entscheidungstraegern in Laendern und Kommunen ein

Concepts for `superior process control` in the energy industry; Konzepte fuer die uebergeordnete Prozessfuehrung in der Energiewirtschaft

Energy Technology Data Exchange (ETDEWEB)

Doellen, U.C. von

1996-12-01

The work concerns the task of control described as dispatching of extensive energy supply and distribution networks. Due to the special contractual situation, there are special long-term targets in firms, which must be achieved in addition to the extensive operational tasks of control and monitoring of the networks. The concepts introduced in the work offer a framework for a target-orientated design of computer-aided menus for this superior process control in the energy industry. (orig./GL) [Deutsch] Die Arbeit betrachtet die als Dispatching bezeichnete Aufgabe der Fuehrung ausgedehnter Energieversorgungs- und verteilungsnetze. Aus den speziellen Vertragssituationen ergeben sich in den Unternehmen besondere, langfristige Zielvorgaben an die mit der Betriebsfuehrung beauftragen Operateure, die zusaetzlich zu den umfangreichen operativen Aufgaben der Fuehrung und Ueberwachung der Netze zu erreichen sind. Die in der Arbeit vorgestellten Konzepte bieten den Rahmen fuer einen zielgerichteten Entwurf rechnergestuetzter Hilfsmittel fuer diese uebergeordnete Prozessfuehrung in der Energiewirtschaft. Das erstellte Gesamtsystem wird abschliessend zur Loesung einer konkreten, energiewirtschaftlichen Problemstellung eingesetzt. Die entwickelte Anwendungsloesung wird als Hilfsmittel fuer die technische und vertragliche Optimierung im Dispatching eingesetzt. Wesentliche Zielsetzung ist ein technisch und wirtschaftlich optimaler Einsatz von Energiespeichern zur Deckung von Spitzenlasten. (orig./GL)

Online readout and control unit for high-speed/high resolution readout of silicon tracking detectors

International Nuclear Information System (INIS)

Buerger, J.; Hansen, K.; Lange, W.; Nowak, T.; Prell, S.; Zimmermann, W.

1997-01-01

We are describing a high speed VME readout and control module developed and presently working at the H1 experiment at DESY in Hamburg. It has the capability to read out 4 x 2048 analogue data channels at sampling rates up to 10 MHz with a dynamic input range of 1 V. The nominal resolution of the A/D converters can be adjusted between 8 and 12 bit. At the latter resolution we obtain signal-to-noise ratio better than 61.4 dB at a conversion rate of 5 MSps. At this data rate all 8192 detector channels can be read out to the internal raw data memory and VME interface within about 410 μs and 510 μs, respectively. The pedestal subtracted signals can be analyzed on-line. At a raw data hit occupation of 10%, the VME readout time is 50 μs per module. Each module provides four complementary CMOS signals to control the front-end electronics and four independent sets of power supplies for analogue and digital voltages (10 V, 100 mA) to drive the front-end electronics and for the bias voltage (100 V, 1.2 mA) to assure the full functionality of the detectors and the readout. (orig.)

Online readout and control unit for high-speed/high resolution readout of silicon tracking detectors

Science.gov (United States)

Bürger, J.; Hansen, K.; Lange, W.; Nowak, T.; Prell, S.; Zimmermann, W.

1997-02-01

We are describing a high speed VME readout and control module developed and presently working at the H1 experiment at DESY in Hamburg. It has the capability to read out 4 × 2048 analogue data channels at sampling rates up to 10 MHz with a dynamic input range of 1 V. The nominal resolution of the A/D converters can be adjusted between 8 and 12 bit. At the latter resolution we obtain signal-to-noise ratio better than 61.4 dB at a conversion rate of 5 MSps. At this data rate all 8192 detector channels can be read out to the internal raw data memory and VME interface within about 410 μs and 510 μs, respectively. The pedestal subtracted signals can be analyzed on-line. At a raw data hit occupation of 10%, the VME readout time is 50 μs per module. Each module provides four complementary CMOS signals to control the front-end electronics and four independent sets of power supplies for analogue and digital voltages (10 V, 100 mA) to drive the front-end electronics and for the bias voltage (100 V, 1.2 mA) to assure the full functionality of the detectors and the readout.

Online readout and control unit for high-speed / high resolution readout of silicon tracking detectors

International Nuclear Information System (INIS)

Buerger, J.; Hansen, K.; Lange, W.; Nowak, T.; Prell, S.; Zimmermann, W.

1996-09-01

We are describing a high speed VME readout and control module developed and presently working at the H1 experiment at DESY in Hamburg. It has the capability to read out 4 x 2048 analogue data channels at sampling rates up to 10 MHz with a dynamic input range of 1 V. The nominal resolution of the A/D converters can be adjusted between 8 and 12 bit. At the latter resolution we obtain signal-to-noise ratio better than 61.4 dB at a conversion rate of 5 MSps. At this data rate all 8192 detector channels can be read out to the internal raw data memory and VME interface within about 410 μs and 510 μs, respectively. The pedestal subtracted signals can be analyzed on-line. At a raw data hit occupation of 10%, the VME readout time is 50 μs per module. Each module provides four complementary CMOS signals to control the front-end electronics and four independent sets of power supplies for analogue and digital voltages (10 V, 100 mA) to drive the front-end electronics and for the bias voltage (100 V, 1.2 mA) to assure the full functionality of the detectors and the readout. (orig.)

Double-layer capacitors as dynamic stores for PV applications. Final report; Doppelschichtkondensatoren als dynamische Speicher fuer PV-Anwendungen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Willer, B.; Knorr, R.; Broeker, C.; Burger, B.; Wollny, M.

1999-07-01

Double layer capacitors are the system of choice whenever a large number of cycles and high capacity are required. They have the advantages of high cyclic strength, high capacity, freedom of servicing, insensitivity to high temperatures and long life. Drawbacks are low energy density, high self-discharge and high cost.Applications in water pumps, pathfinders and roller blind control systems were investigated. [German] Mit den Ergebnissen steht ein detailliertes Wissen ueber den weltweiten Entwicklungsstand und die physikalischen Eigenschaften von Doppelschichtkondensatoren zur Verfuegung. Ihre Eigenschaften wurden in Bezug auf moegliche photovoltaische Anwendungen hin analysiert. Anwendungsfehlder ergeben sich vorzugsweise dann, wenn hohe Zyklenzahl und Leistungsfaehigkeit gefordert werden. Die Vorteile des neuen Energiespeichers sind seine hohe Zyklenfestigkeit und Leistungsfaehigkeit, seine Wartungsfreiheit, Temperaturunempfindlichkeit und lange Lebensdauer. Ihnen stehen die Nachteile einer geringen Energiedichte, hohen Selbstentladung und hoher Kosten gegenueber. Eine deutliche Steigerung der Gesamteffizienz von photovoltaischen Versorgungseinheiten beim Einsatz von Doppelschichtkondensatoren ergeben energetische Simulationen unterschiedlicher Systeme. Fuer ausgewaehlte photovoltaisch versorgte Anwendungen konnte die Einsatzfaehigkeit von Doppelschichtkondensatoren in Feldtests erprobt und nachgewiesen werden. Wasserpumpensysteme, Pathfinders und eine Rolladensteuerung fuer ein Fenster wurden getestet. Der Einsatz von Doppelschichtkondensatoren zur weiteren Verbreitung photovoltaischer Anwendungen ist bereits heute fuer spezielle Anwendungen sinnvoll und wirtschaftlich. Mit weiter fallenden Preisen fuer die Kondensatoren und der Entwicklung von Kondensatorsystemen mit hoeheren Spannungen werden weitere Anwendungsfelder hinzukommen. Die Basis zur Entwicklung der notwendigen Systemtechnik und ihrer Demonstration in Feldversuchen ist durch die Ergebnisse des

Upgrade of the TOTEM DAQ using the Scalable Readout System (SRS)

International Nuclear Information System (INIS)

Quinto, M; Cafagna, F; Fiergolski, A; Radicioni, E

2013-01-01

The main goals of the TOTEM Experiment at the LHC are the measurements of the elastic and total p-p cross sections and the studies of the diffractive dissociation processes. At LHC, collisions are produced at a rate of 40 MHz, imposing strong requirements for the Data Acquisition Systems (DAQ) in terms of trigger rate and data throughput. The TOTEM DAQ adopts a modular approach that, in standalone mode, is based on VME bus system. The VME based Front End Driver (FED) modules, host mezzanines that receive data through optical fibres directly from the detectors. After data checks and formatting are applied in the mezzanine, data is retransmitted to the VME interface and to another mezzanine card plugged in the FED module. The VME bus maximum bandwidth limits the maximum first level trigger (L1A) to 1 kHz rate. In order to get rid of the VME bottleneck and improve scalability and the overall capabilities of the DAQ, a new system was designed and constructed based on the Scalable Readout System (SRS), developed in the framework of the RD51 Collaboration. The project aims to increase the efficiency of the actual readout system providing higher bandwidth, and increasing data filtering, implementing a second-level trigger event selection based on hardware pattern recognition algorithms. This goal is to be achieved preserving the maximum back compatibility with the LHC Timing, Trigger and Control (TTC) system as well as with the CMS DAQ. The obtained results and the perspectives of the project are reported. In particular, we describe the system architecture and the new Opto-FEC adapter card developed to connect the SRS with the FED mezzanine modules. A first test bench was built and validated during the last TOTEM data taking period (February 2013). Readout of a set of 3 TOTEM Roman Pot silicon detectors was carried out to verify performance in the real LHC environment. In addition, the test allowed a check of data consistency and quality

Integrated energy data solution for energy markets of Europe: Energy Data Warehouse; Integrierte Energiedatenloesung fuer Europas Energiemaerkte: Energy Data Warehouse

Energy Technology Data Exchange (ETDEWEB)

Anon.

2001-07-01

According to Ralf Hoffmann, head of the sales department of Goerlitz Computerbau AG, integrated problem solutions for Europe's new energy markets must be developed fast, without delay and with all efforts available. [German] 'Integrierte Problemloesungen fuer Europas neue Energiemaerkte muessen schnell und investitionssicher fuer die Anwender realisiert werden. Sie dulden keinen Aufschub. Alle unternehmerische Kraft muss und wird in die Befriedigung dieser Anforderungen gelegt.' So aeussert sich der Vorstand Absatzwirtschaft der Goerlitz Computerbau AG, Ralf Hoffmann. (orig.)

Port Card Module

International Nuclear Information System (INIS)

Utes, M.

1994-01-01

The Port Card will be one link in the data acquisition system for the D0 Silicon Vertex Detector. This system consists of the following parts, starting at the detector: Silicon strip detectors are mounted in a spaceframe and wire-bonded to custom bare-die integrated circuits (SVX-II chips) that digitize the charge collected by the strips. The 128-channel chips are mounted on a High-Density Interconnect (HDI) that consists of a small flex circuit that routes control signals and eight data bits for each of three to ten chips onto a common data bus. A cable then routes this bus approximately thirty feet out from the detector to the Port Card. The Port Card houses a commercial chipset that serializes the data in real time and converts the signal into laser light impulses that are then transmitted through a multi-mode optical fiber about 150 feet to a Silicon Acquisition and Readout board (SAR). Here, the data is transformed back to parallel electrical signals that are stored in one of several banks of FIFO memories. The FIFOs place their data onto the VME backplane to a VME Buffer Driver (VBD) which stores the event data in buffers for eventual readout over a thirty-two signal ribbon cable to the Level Two Computers and subsequent tape storage. Control and sequencing of the whole operation starts with the Silicon Acquisition/Readout Controller (SARC) working in tandem with the D0 Clock System. The SARC resides in the same VME crate as the SARs, and transforms signals from the Trigger System into control codes distributed to the various Port Cards via optical fibers operating at 53 Mb/s. It is through these control codes that data taking operations such as data-acquisition, digitization, readout, and various resets can be carried out. The Port Card receives the control codes and manipulates the SVX-II chips in the proper way to effect proper data taking. There will be a total of about 700,000 channels, which translates into about 5580 SVX-II chips, 66 to 100 Port Cards

A teststand for photo detectors and beamtests for ILC polarimetry; Aufbau eines Teststandes fuer Photodetektoren und Teststrahlmessungen fuer die Strahlpolarisationsmessung am ILC

Energy Technology Data Exchange (ETDEWEB)

Velte, Ulrich

2009-02-15

-Lichts charakterisiert und auf ihre Eignung fuer die spezielle Anwendung im ILC-Polarimeter ueberprueft werden koennen. Die bislang beste Polarisationsmessung wurde im Rahmen des SLD-Experimentes am SLAC in Kalifornien erreicht ({delta}P/P{approx}0.5%). Zur Zeit befindet sich der Cerenkov-Detektor des SLD-Polarimeters am DESY und wird dort benutzt, um verschiedene fuer die ILC-Polarimetrie in Frage kommende Photodetektoren im Teststrahl zu vermessen. Um an die Erfahrungen aus dem SLD-Experiment anknuepfen zu koennen, werden im Rahmen dieser Arbeit Teststrahlmessungen am Cerenkov-Detektor, ausgewertet und die ersten Entwicklungen hin zu einem Polarimeter fuer den ILC beschrieben. (orig.)

Upgrade to the control system of the reflectometry diagnostic of ASDEX upgrade

International Nuclear Information System (INIS)

Graca, S.; Santos, J.; Manso, M.E.

2004-01-01

The broadband frequency modulation-continuous wave microwave/millimeter wave reflectometer of ASDEX upgrade tokamak (Institut fuer Plasma Physik (IPP), Garching, Germany) developed by Centro de Fusao Nuclear (Lisboa, Portugal) with the collaboration of IPP, is a complex system with 13 channels (O and X modes) and two types of operation modes (swept and fixed frequency). The control system that ensures remote operation of the diagnostic incorporates VME and CAMAC bus based acquisition/timing systems. Microprocessor input/output boards are used to control and monitor the microwave circuitry and associated electronic devices. The implementation of the control system is based on an object-oriented client/server model: a centralized server manages the hardware and receives input from remote clients. Communication is handled through transmission control protocol/internet protocol sockets. Here we describe recent upgrades of the control system aiming to: (i) accommodate new channels; (ii) adapt to the heterogeneity of computing platforms and operating systems; and (iii) overcome remote access restrictions. Platform and operating system independence was achieved by redesigning the graphical user interface in JAVA. As secure shell is the standard remote access protocol adopted in major fusion laboratories, secure shell tunneling was implemented to allow remote operation of the diagnostic through the existing firewalls

Dimensioning and design rules for sliding bearings; optimisation problems; Bemessungs- und Gestaltungsregeln fuer Gleitlager: Optimierungsfragen

Energy Technology Data Exchange (ETDEWEB)

Spiegel, K. [Fachhochschule Duesseldorf (Germany); Fricke, J.

2000-07-01

Already in the design stage of sliding bearings, optimal conditions for operation at a later stage should be envisaged. The contribution presents hints for optimal design and calculation of radial and axial bearings, e.g. gap design, optimised supporting strength, friction loss and lubricant throughput, lubricant exchange and lubricant heat exchange, and improved control of internal lubricant flow. [German] Bei der Auslegung von Gleitlagern ist es von Interesse, moeglichst optimale Bedingungen fuer den spaeteren Betrieb zu schaffen. Im vorliegenden Beitrag werden einige bereits bekannte und auch neue Hinweise zur optimalen Gestaltung und Berechnung, sowohl fuer Radial- als auch Axiallager gegeben. Dies betreffen im wesentlichen: die Gestaltung des Spaltverlaufs, Empfehlungen zur Optimierung der Tragfaehigkeit, der Reibungsverluste und des Schmierstoffdurchsatzes, Hinweise zum Schmierstoff- bzw. Schmierstoff-Waermeaustausch und die Verbesserung der inneren Schmierstofffuehrung. (orig.)

The Chernobyl reactor accident, ten years on. Teaching projects for mathematics instruction in interdisciplinary working groups; 10 Jahre nach Tschernobyl. Unterrichtsprojekte fuer den Mathematikunterricht in faecheruebergreifenden Kooperationen

Energy Technology Data Exchange (ETDEWEB)

Boer, H. [comp.; Delle, E. [comp.; Mies, K. [comp.; Warmeling, A. [comp.

1996-10-01

The booklet presents background information and addresses the following aspects: ionizing radiation and radiation effects; safety of German nuclear power plants; statistical evidence of radiation injuries; short-lived and long-lived ionizing radiation; radioactive waste; CO{sub 2} emissions as an argument in favour of nuclear power generation. The material presented is intended for use by a school project team interested in the subjects, or as a basis for collaborative, interdisciplinary teaching in working groups, and it offers information and problems for mathematics teaching. (HP) [Deutsch] Neben vielen Informationen behandelt die Broschuere: Strahlen und Strahlenwirkungen; Sicherheit deutscher Kernkraftwerke; statistischer Nachweis von Strahlenschaeden; Kurz- und Langfestigkeit der Strahlenbelastung; radioaktiver Abfall; CO{sub 2}-Problematik als Argument fuer die Kernenergie. Die Broschuere ist gedacht z.B. fuer eine Projektgruppe, einen Projekttag, fuer eine Lerngruppe in faecheruebergreifender Kooperation. Die Materialien sind ausgearbeitet fuer die Themembearbeitung im Mathematikunterricht mit Uebungsaufgaben. (HP)

Research for the thermal change. Contributions; Forschung fuer die Waermewende. Beitraege

Energy Technology Data Exchange (ETDEWEB)

Szczepanski, Petra; Wunschick, Franziska; Martin, Niklas (comps.)

2016-05-15

The energy transition in the heating sector is not a sure-fire success and it is too slow. This is alarming since the heating / cooling sector is responsible for more than half of the final energy demand. That the ''thermal change'' has accelerated hardly despite many efforts by politics, industry and research in recent years, is the reason for the scientists the FVEE institutes to examine the perspectives of renewable energy and the need to increase efficiency in the heating sector systematically. therefore FVEE-2015 Annual Meeting, is entitled ''Research for the thermal change''. The contributions of this conference proceedings present the latest research results and show ways to implement the heat change technically, economically and politically. They are dedicated to the drivers, but also the barriers of heat change. The authors report on innovative projects to provide buildings with heat from geothermal energy, biomass and solar thermal energy. Several contributions are dedicated to the application of efficient components, such as thermal insulation, thermal storage and heat pumps. [German] Die Energiewende im Waermesektor ist kein Selbstlaeufer und kommt zu langsam voran. Das ist alarmierend, da der Waerme-/Kaeltesektor fuer ueber die Haelfte des Endenergiebedarfs verantwortlich ist. Dass die ''Waermewende'' trotz vielerlei Bemuehungen von Politik, Industrie und Forschung in den letzten Jahren kaum Fahrt aufgenommen hat, ist Anlass fuer die Wissenschaftlerinnen und Wissenschaftler der FVEE-Institute, die Perspektiven der erneuerbaren Energien und der notwendigen Effizienzsteigerung im Waermesektor systematisch zu untersuchen. Die FVEE-Jahrestagung 2015 steht deshalb unter dem Leitthema ''Forschung fuer die Waermewende''. Die Beitraege dieses Tagungsbandes praesentieren aktuelle Forschungsergebnisse und zeigen Wege auf, um die Waermewende technisch, wirtschaftlich und politisch

Knitted structures of endless fibers for gas cleaning. Pt. 2; Gestrickte Strukturen aus Endlosfasern fuer die Abgasreinigung. T. 2

Energy Technology Data Exchange (ETDEWEB)

Mayer, A.; Mayer, J.; Wintermantel, E.; Buck, A.; Schmidt, R.M.; Mattes, P.; Sudmanns, H.; Bressler, H.

1995-07-01

Knittings based on ceramic filament yarns can be used to clean polluted air and exhaust gas efficiently up to temperatures of 1000 C. They provide interesting properties for the filtration of Diesel particles as well as for catalysis and adsorption of toxic gas components. The special knitting technology can handle any brittle fibers, producing elastic structures, which are thermochoc-resistent and can therefore even be used for preturbo applications. The first part of this paper, published in MTZ 56 (1995) 2 deals with the basic properties of this cleaning medium. This second part concentrates on Diesel particulate trop applications. These new trap and catalyst concepts are under development by Buck/Bondorf with TTM/Niederrohrdorf. Basic research is delegated to ETH Zuerich and Universitaet by Gillet/Edenkoben and, with focus on preturbo-applications by MTU/Friedrichshafen. (orig.) [Deutsch] Gestricke aus keramischen Endlosfasern sind bis zu Temperaturen um 1000 C fuer die Abluft- und Abgasreinigung einsetzbar. Sie eignen sich fuer die Filtration von Dieselpartikeln, insbesondere deren Feinstfraktionen ebenso wie fuer die Katalyse und fuer die Adsorption gasfoermiger Schadstoffkomponenten. Die Strukturen sind volumenelastisch, unempfindlich gegen Thermoschock und daher auch im motornahen Bereich risikoarm einsetzbar. In einem ersten Teilbeitrag in der Februarausgabe der MTZ wurden grundlegende Erkenntnisse dieses Abgasreinigungsmediums beschrieben. Der vorliegende zweite Teil beschreibt Anwendungen mit Schwerpunkt Dieselpartikelfilter. Diese neue Fasertechnik wird bei Buck, Bondorf, zusammen mit TTM, Niderrohrdorf, entwickelt. Forschungsarbeiten werden an der ETH Zuerich und der Universitaet Erlangen im Rahmen des BMFT-Projektes 01 VQ 9305/9 durchgefuehrt. Fragen zu motornachgeschalteten Anwendungen untersucht Gillett, Edenkoben, Moeglichkeiten der Motorintegration solcher Filter die MTU Friedrichshafen. (orig.)

Automatic generation of configuration files for a distributed control system

CERN Document Server

Cupérus, J

1995-01-01

The CERN PS accelerator complex is composed of 9 interlinked accelerators for production and acceleration of various kinds of particles. The hardware is controlled through CAMAC, VME, G64, and GPIB modules, which in turn are controlled by more than 100 microprocessors in VME crates. To produce startup files for all these microprocessors, with the correct drivers, programs and parameters in each of them, is quite a challenge. The problem is solved by generating the startup files automatically from the description of the control system in a relational database. The generation process detects inconsistencies and incomplete information. Included in the startup files are data which are formally comments, but can be interpreted for run-time checking of interface modules and program activity.

Research and development of common DAQ platform

International Nuclear Information System (INIS)

Higuchi, T.; Igarashi, Y.; Nakao, M.; Suzuki, S.Y.; Tanaka, M.; Nagasaka, Y.; Varner, G.

2003-01-01

The upgrade of the KEKB accelerator toward L=10 35 cm -2 s -1 requires an upgrade of the Belle data acquisition system. To match the market trend, we develop a DAQ platform based on the PCI bus that enables fastest DAQ with longer lifetime of the system. The platform is a VME-9U motherboard comprising of four slots for signal digitization modules and three PMC slots to house CPU for data compression. The platform is equipped with event FIFOs for data buffering to minimize the dead-time. A trigger module residing on VME-6U size rear board is connected to the 9U board via PCI-PCI bridge to make an interrupt for the CPU upon the level-1 trigger. (author)

Lead-free sliding overplate for highly loaded big end bearings; Bleifreie Laufschicht fuer hochbelastete Haupt- und Pleuellager

Energy Technology Data Exchange (ETDEWEB)

Graham, N.; Schnell, L.; Arnold, G. [Federal-Mogul Wiesbaden GmbH and Co. KG (Germany)

2003-10-01

Lead has always been an important metal in plain bearing technology. Completely lead-free solutions for high-end engine applications are still not considered to be technically achievable. Therefore, the European End of Life Directive (2000/53/EC), which took effect on 1 July 2003, lists copper-based lead/bronze bearings as an exception. The bearing group of Federal-Mogul has now announced its exit from the lead industry and addresses the issue layer by layer. A recently introduced adaptive bearing offers a lead-free overplate for high-performance internal combustion engine applications. This new bearing changes its technical characteristics during the running-in phase. (orig.) [German] Blei war schon immer eine wichtige Komponente in der Gleitlagertechnik. Bis heute gelten vollstaendig bleifreie Loesungen fuer hochbelastete Gleitlager als technisch nicht machbar. Deshalb nennt die europaeische Altautoverordnung (2000/53/EG), die seit dem 1. Juli 2003 in Kraft ist, als Ausnahme die kupferbasierten Bleibronzelager. Die Gleitlagergruppe von Federal-Mogul hat jetzt ihren Rueckzug aus der Verarbeitung von Blei angekuendigt und geht das Thema Schicht fuer Schicht an. Ein kuerzlich eingefuehrtes, anpassungsfaehiges Lager fuer High-End-Verbrennungsmotoren verfuegt ueber eine bleifreie Laufschicht. Bei diesem neuen Lager veraendern sich die technischen Eigenschaften waehrend der Einlaufphase. (orig.)

Selection of compressors and drives for natural gas storage and transport - technical and economic aspects; Auswahl von Verdichtern und Antriebsmaschinen fuer die Erdgasspeicherung und den Erdgastransport - technische und wirtschaftliche Aspekte

Energy Technology Data Exchange (ETDEWEB)

Heyer, F.; Wieke, S. [Heyer und Wieke Engineering, Muenchen (Germany)

1998-12-31

Selection of the proper compressor/drive combination is indispensable for optimizing natural gas storage. The contribution presents a comparison of the available systems. (orig.) [Deutsch] Fuer die Verdichtung von Erdgas fuer die Erdgasspeicherung und den Erdgastransport ist die Auswahl der fuer den jeweiligen Anwendungsfall geeigneten Verdichter-Antriebskombination eine wesentliche Voraussetzung fuer einen technisch und wirtschaftlich optimalen Betrieb. Unter Beruecksichtigung des Marktes werden die Varianten (Verdichter-Antriebskombinationen) definiert und in einem technischen Vergleich Vor- und Nachteile der einzelnen Alternativen gegenuebergestellt und bewertet. Die Einhaltung der Betriebsanforderungen und der Anforderungen der TA-Luft und TA-Laerm, der Wirkungsgrad, die Zuverlaessigkeit und Verfuegbarkeit muessen einer besonders intensiven Pruefung und Beurteilung unterzogen werden. Das Ergebnis der vergleichenden Bewertung der Varianten kann eine neue Definition der Varianten oder der Anforderungen notwendig machen. (orig.)

A universal concept for IV-supported operation management; Ein universelles Konzept fuer die IV-gestuetzte Betriebsfuehrung

Energy Technology Data Exchange (ETDEWEB)

Sturm, A.

1997-12-31

The continuing rise in cost pressure calls for measures for enhancing the efficiency of operation management and maintenance. At the same time it is necessary to maintain the requisite reliability of production and keep abreast of the ever more stringent requirements of working safety and environment protection. This paper presents an integral operation management system for production plants which does justice to both the productive and the and the conserving function of operation management. The development and introduction of this system to conventional power plants has meanwhile begun. The system consistently gives consideration to the fact that operation management depends on processing data and information of different properties. Whereas process data can show strong fluctuations, there are many kinds of information on the plant concerning, for example, plant installations, processes, damage, and maintenance which hardly fluctuate at all or only change over long time periods. These latter include plant and installation addresses, technical data on the system or on maintenance. In operation management systems designed for production plants it can therefore be useful to organise the handling of process data (dynamic data) and plant data (static data) separately. [Deutsch] Der immer staerkere Kostendruck erfordert Massnahmen zur Effizienzsteigerung der Betriebsfuehrung und der Instandhaltung bei Erhaltung der erforderlichen Zuverlaessigkeit der Produktion, steigenden Anforderungen an Arbeitssicherheit und Umweltschutz. Ein Gesamtbetriebsfuehrungssystem, das sowohl die Produktionsfunktion, als auch die Erhaltungsfunktion abdeckt, wurde fuer Produktionsanlagen konzipiert. Fuer konventionelle Kraftwerke wurde die Entwicklung und Einfuehrung begonnen. Dieses System beruecksichtigt konsequent, dass bei der Betriebsfuehrung Daten und Informationen mit unterschiedlichen Eigenschaften zu verarbeiten sind. Waehrend die Prozessdaten hoch fluktuierende Daten sein koennen

An integrated computer control system for the ANU linac

International Nuclear Information System (INIS)

Davidson, P.M.; Foote, G.S.

1996-01-01

One facet of the installation of the superconducting linac at the ANU is the need for computer control of a variety of systems, such as beam transport, resonator RF, cryogenics and others. To accommodate this, a number of control interfaces (for example, analogue signals and RS232 serial lines) must be employed. Ideally, all of the systems should be able to be controlled from a central location, remote from the actual devices. To this end a system based around VAX computers and VME crates has been designed and is currently being developed and implemented. A VAXstation is used to issue control messages and perform high-level functions, while VME crates containing appropriate modules (primarily DACs, ADCs and digital I/O boards) control the devices. The controllers in the VME crates are AEON rtVAX modules running a real-time operating system. Communication with the VAXstation is via DECnet, on a private ethernet to allow communication rates unaffected by unrelated network activity and potentially increasing the security of the system by providing a possible network isolation point. Also on this ethernet are a number of terminal servers to control RS232 devices. A central database contains all device control and monitoring parameters. The main control process running on the VAXstation is responsible for maintaining the current values of the parameters in the database and for dispatching control messages to the appropriate VME crate or RS232 serial line

Integral energy concepts for housing estates; Integrale Energiekonzepte fuer Wohnsiedlungen

Energy Technology Data Exchange (ETDEWEB)

Fisch, M.N.; Kuehl, L. [Technische Univ. Braunschweig (Germany)

1998-06-01

Integral energy concepts for housing estates require an early cooperation between architects, planners, and specialist engineers on the basis of a holistic planning approach. This is how future-oriented, sustainable concepts evolve which do justice to the multifarious requirements on the integral energy system of a housing estate. The present paper elucidates different approaches to optimising the energy efficiency of buildings such as the implementation of low-energy house concepts, building site and architectural planning, and detailed planning of heat insulation concepts, ventilation and air tightness concepts, and adapted heating systems. The solarisation of development plans has an influence on the arrangement of buildings, which are now planned to give the greatest possible passive and active solar energy gains. The authors also describe solar-assisted district heating systems for housing estates. [Deutsch] Integrale Energiekonzepte fuer Wohnsiedlungen erfordern die fruehe Zusammenarbeit von Architekten, Planern und Fachingenieuren im Rahmen einer ganzheitlichen Planung. So entstehen zukunftsweisende und tragfaehige Konzepte, die den vielschichtigen Anforderungen des Gesamtenergiesystems ``Wohnsiedlung`` gerecht werden. Im Folgenden wird die energetische Optimierung von Gebaeuden wie die Umsetzung von Niedrigenergiehaus-Konzepten, Standort und Gebaeudeplanung sowie Detailplanung in Bezug auf das Waermedaemmkonzept, Lueftungs-/Dichtheitskonzept und auf angepasste Waermeversorgungssysteme erl autert. Die Solarisierung von Bebauungsplaenen beeinflusste Anordnung der Gebaeude hinsichtlich der Nutzung passivsolarer Gewinne sowie des Einsatzes von Systemen der aktiven Solarenergienutzung. Solarunterstuetzte Nahwaermenetze fuer Wohnsiedlungen werden ebenfalls beschrieben.

Shaft barriers for underground waste repositories in abandoned salt mines. Preparatory project. Vol. 2. Annex; Schachtverschluesse fuer untertaegige Deponien in Salzbergwerken. Vorprojekt. Bd. 2. Anhang

Energy Technology Data Exchange (ETDEWEB)

Schmidt, M W [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Fruth, R [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Stockmann, N [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Birthler, H [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Boese, B [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Storck, R [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Sitz, P [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Krausse, A [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Eulenberger, K H [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Schleinig, J P [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Duddeck, H [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Ahrens, H [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Menzel, W [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Salzer, K [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Minkley, W [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Busche, H [Kali und Salz AG, Kassel (Germany); Lindloff, U [Kali und Salz AG, Kassel (Germany); Gierenz, S [Kali und Salz AG, Kassel (Germany)

1996-12-31

This preparatory study, ``Shaft barriers for underground waste repositories in abandoned salt mines``, was to demonstrate the current scientific and technological know-how based on a comprehensive analysis of the barrier design concepts or established structures intended to serve as barriers in abandoned shafts of potash or rock salt mines. Taking as a basis the current regulatory regime and the available know-how on barrier systems in underground waste repositories taken into account so far in plan approval and licensing procedures, as well as the state of the art, concepts are developed as technical guides and models of barrier systems for mine shafts. The required research work for the various components of a shaft barrier is shown, particularly relating to aspects such as materials suitability and technical realisation. Immediate demand for research activities is shown with regard to the available potentials of mathematic and numeric geotechnical and hydrogeologic calculation models required in order to give proof of the long-term workability of shaft barriers. The authors are of the opinion that the following activities are required in order to meet the research demand quantified: (1) Laboratory and bench-scale experiments for determination of the efficiency of various sealing materials and backfilling materials, and (2) an in-situ, large-scale experiment in order to demonstrate the suitability of low-consolidation shotter columns, or constructional technologies. The laboratory work can be done in the facilities of the GSF research mine of Asse, the Freiburg Mining Academy, and the Institut fuer Gebirgsmechanik in Leipzig, and the benchmark experiments also at the Asse site in the research mine. The Kali und Salz Beteiligungs AG is prepared to offer its mine Salzdetfurth II as a site for the large-scale experiment. (orig.) [Deutsch] Im Rahmen der Vorstudie ``Schachtverschluesse fuer Untertagedeponien in Salzbergwerken`` wird ausgehend von einer umfangreichen

Shaft barriers for underground waste repositories in abandoned salt mines. Preparatory project. Vol. 2. Annex; Schachtverschluesse fuer untertaegige Deponien in Salzbergwerken. Vorprojekt. Bd. 2. Anhang

Energy Technology Data Exchange (ETDEWEB)

Schmidt, M.W. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Fruth, R. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Stockmann, N. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Birthler, H. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Boese, B. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Storck, R. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Sitz, P. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Krausse, A. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Eulenberger, K.H. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Schleinig, J.P. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Duddeck, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Ahrens, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Menzel, W. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Salzer, K. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Minkley, W. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Busche, H. [Kali und Salz AG, Kassel (Germany); Lindloff, U. [Kali und Salz AG, Kassel (Germany); Gierenz, S. [Kali und Salz AG, Kassel (Germany)

1995-12-31

This preparatory study, ``Shaft barriers for underground waste repositories in abandoned salt mines``, was to demonstrate the current scientific and technological know-how based on a comprehensive analysis of the barrier design concepts or established structures intended to serve as barriers in abandoned shafts of potash or rock salt mines. Taking as a basis the current regulatory regime and the available know-how on barrier systems in underground waste repositories taken into account so far in plan approval and licensing procedures, as well as the state of the art, concepts are developed as technical guides and models of barrier systems for mine shafts. The required research work for the various components of a shaft barrier is shown, particularly relating to aspects such as materials suitability and technical realisation. Immediate demand for research activities is shown with regard to the available potentials of mathematic and numeric geotechnical and hydrogeologic calculation models required in order to give proof of the long-term workability of shaft barriers. The authors are of the opinion that the following activities are required in order to meet the research demand quantified: (1) Laboratory and bench-scale experiments for determination of the efficiency of various sealing materials and backfilling materials, and (2) an in-situ, large-scale experiment in order to demonstrate the suitability of low-consolidation shotter columns, or constructional technologies. The laboratory work can be done in the facilities of the GSF research mine of Asse, the Freiburg Mining Academy, and the Institut fuer Gebirgsmechanik in Leipzig, and the benchmark experiments also at the Asse site in the research mine. The Kali und Salz Beteiligungs AG is prepared to offer its mine Salzdetfurth II as a site for the large-scale experiment. (orig.) [Deutsch] Im Rahmen der Vorstudie ``Schachtverschluesse fuer Untertagedeponien in Salzbergwerken`` wird ausgehend von einer umfangreichen

Results report on research and development work 1980 of the Institut fuer Nukleare Entsorgungstechnik

International Nuclear Information System (INIS)

1981-02-01

The Institut fuer Nukleare Entsorgungstechnik performs research and development work on the treatment, solidification and final storage of radioactive wastes. The main target of the work is to develop processes and concepts for a safe disposal of radioactive wastes from nuclear plants. The work on waste treatment is carried out within the framework of the reprocessing and waste treatment project. It comprises of the development and characterization of ultimate storable waste products as well as the development of processes for the treatment and solidification of radioactive wastes mainly from reprocessing irradiated nuclear fuels. The studies on the ultimate storage are carried out together with the 'Gesellschaft fuer Strahlen- und Umweltforschung'. Their main concern is the analysis of processes in the neighbourhood of ultimate storage (waste product, packing, filling and immediate surrounding storage medium) for normal and accident conditions and their safety technical optimization. The report is supplemented by a list of publications and lectures of the institute coworkers in 1980. (orig./RB) [de

The Environmental Impact Assessment (EIA) for high-voltage overhead lines; Umweltvertraeglichkeitspruefung (UVP) fuer Hochspannungsfreileitungen

Energy Technology Data Exchange (ETDEWEB)

Klockow, S. [Landesentwicklungsgesellschaft Baden-Wuerttemberg, Stuttgart (Germany). Abt. Umwelt

1996-11-04

In some of the federal states of Germany the licensing of new or the laying or existing high-voltage overhead lines requires an environmental impact assessment. For many utility companies, however, environmental impact assessments for high-voltage lines are virgin territory. Experience shows that preparing the documentation is not a major problem. Questions usually arise over details such as the calculation of possible incidents or the comparison of different layouts. The authors describes general approaches and strategies and looks at specific problems. (orig.) [Deutsch] Bei der Genehmigung neuer oder der Verlegung vorhandener Hochspannungsfreileitungen ist in einigen Bundeslaendern eine Umweltvertraeglichkeitspruefung durchzufuehren. Fuer viele Energieversorgungsunternehmen ist die Erarbeitung von Umweltvertraeglichkeitsstudien fuer Hochspannungsleitungen aber noch Neuland. Praxiserfahrungen zeigen, dass die Erarbeitung der erforderlichen Unterlagen ohne groessere Schwierigkeiten moeglich ist. Fragen ergeben sich dabei aber bei speziellen Details, z.B. bei der Betrachtung von moeglichen Stoerfaellen oder beim Vergleich von Trassenvarianten. Der Verfasser skizziert das allgemeine Vorgehen und erlaeutert ausfuehrlich die Detailprobleme. (orig.)

Sorption properties of nanocrystalline metal hydrides for the storage of hydrogen; Sorptionseigenschaften von nanokristallinen Metallhydriden fuer die Wasserstoffspeicherung

Energy Technology Data Exchange (ETDEWEB)

Oelerich, W.

2000-07-01

For the utilisation of hydrogen in emission-free automobiles new nanostructured Mg-based metal hydrides were developed. These materials show significantly faster absorption and desorption kinetics, which can be even further enhanced by additions of suitable catalysts. Contrary to conventional magnesium powder, hydrogenation at room temperature is demonstrated for the first time. During dehydrogenation at 250 C a desorption rate of 3 to 8 kW/kg with a capacity of 2.5 kWh/kg is achieved, that fulfills the technical requirements for automobile application. (orig.) [German] Im Hinblick auf den Einsatz von Wasserstoff in emissionsfreien Kraftfahrzeugen wurden neuartige nanostrukturierte Metallhydride auf Basis von Magnesium hergestellt. Diese Materialien zeigen eine deutlich schnellere Absorptions- und Desorptionskinetik, die sich durch den Zusatz von geeigneten Katalysatoren noch weiter steigern laesst. Im Gegensatz zu konventionellem Magnesiumpulver konnte erstmals eine Hydrierung bei Raumtemperatur demonstriert werden. Bei der Dehydrierung bei 250 C wird eine Desorptionsrate von 3 bis 8 kW/kg bei einer Kapazitaet von 2,5 kWh/kg erreicht, die die technischen Leistungsanforderungen von Kraftfahrzeugen erfuellt. (orig.)

Marine environment protection of the North Sea and Baltic Sea. Special report - February 2004; Meeresumweltschutz fuer Nord- und Ostsee. Sondergutachten - Februar 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The marine environment of the North Sea and Baltic Sea is still heavily polluted. The marine ecosystems are under severe stress from overfishing, water pollution, raw materials production and tourism. Environmental protection in this region necessitates decisive political initiatives and strict corrections especially in fishery policy, agricultural policy and chemical substances control. This is the balance of the special expert opinion of the Council of Environmental Experts. The publication specifies the main problem areas, the current pollution situation, the fields where action is most urgently required - especially in fishery, chemical substances, agricultural and sea travel policies - and presents suggestions for an integrated European and national marine protection policy including a regional development concept for the marine environment. (orig.) [German] Die Meeresumwelt von Nord- und Ostsee ist nach wie vor stark belastet. Ueberfischung, Schadstoffeintraege und Ueberduengung sowie die intensive Nutzung durch Schifffahrt, Rohstoffabbau und Tourismus beeintraechtigen vielfach massiv die marinen Oekosysteme. Ein wirksamer Meeresumweltschutz erfordert daher einschneidende politische Initiativen und grundlegende Korrekturen insbesondere in der Fischereipolitik, der Agrarpolitik und bei der Chemikalienregulierung. Diese Bilanz zieht der Rat von Sachverstaendigen fuer Umweltfragen in seinem aktuellen Sondergutachten 'Meeresumweltschutz fuer Nord- und Ostsee'. Das Sondergutachen - gibt einen Ueberblick ueber die wichtigsten Problemfelder und die aktuelle Belastungslage, - zeigt den wesentlichen Handlungsbedarf auf, insbesondere fuer die Fischerei-, Chemikalien-, Agrar- und Schifffahrtspolitik und - entwickelt Vorschlaege fuer eine integrierte europaeische und nationale Meeresschutzpolitik einschliesslich einer Merresraumordnung. (orig.)

Forest report 2015 for Baden-Wuerttemberg; Waldzustandsbericht 2015 fuer Baden-Wuerttemberg

Energy Technology Data Exchange (ETDEWEB)

Meining, Stefan [Buero fuer Umweltueberwachung, Freiburg (Germany); Wilpert, Klaus v.; Hoelscher, Andrea [Forstliche Versuchs- und Forschungsanstalt Baden-Wuerttemberg, Freiburg im Breisgau (Germany); and others

2015-07-01

In Baden-Wuerttemberg, the state of forests has been recorded since the 1980s in the course of an annual forest status report. In 2015, a decline in forest damage can be reported. As an indicator for the evaluation of the forest state, the crown condition of the trees applies. The average crown defoliation has been reduced by two percentage points to around 24 percent, while the share of healthy forest areas increased by five percentage points to a total of 29 percent. The clearly damaged forest areas decreased by six percentage points to 36 percent. Concerns are causing a relatively new fungus disease in the tree species ash, the ash dieback. [German] In Baden-Wuerttemberg wird der Zustand der Waelder seit den 1980er Jahren im Zuge eines jaehrlichen Waldzustandsberichtes erfasst. Fuer das Jahr 2015 kann erfreulicherweise einen Rueckgang der Waldschaeden verzeichnet werden. Als Indikator fuer die Beurteilung des Waldzustandes gilt der Kronenzustand der Baeume. Die durchschnittliche Kronenverlichtung hat sich um zwei Prozentpunkte auf rund 24 Prozent verringert, waehrend sich der Anteil der gesunden Waldflaeche um fuenf Prozentpunkte auf insgesamt 29 Prozent erhoehte. Die deutlich geschaedigten Waldflaechen verringerten sich um sechs Prozentpunkte auf 36 Prozent. Sorgen bereitet eine relativ neue Pilzerkrankung bei der Baumart Esche, das Eschentriebsterben.

PM-materials for hot working tools; PM-Werkstoffe fuer warmgehende Werkzeuge

Energy Technology Data Exchange (ETDEWEB)

Berns, H.; Broeckmann, C.; Theisen, W. [Bochum Univ. (Germany). Fakultaet fuer Maschinenbau; Wewers, B.

2001-05-01

Tools and wear parts for compacting tools are subjected to high abrasive wear and mechanical loading at elevated temperatures. MMC's based in iron- or nickel with hard particles are developed and investigated. The materials were manufactured from powders by hot isostatic pressing (HIP) and subsequently heat treated. Diffusion between hard phases and metal matrix brings about certain micro structures which were tested with respect to the resistance against sliding abrasion at room and elevated temperatures. Three-point bending tests and thermal cycling of the material was utilized to characterise the mechanical behaviour. Based on this results a toolkit for a roller press for briquetting was produced and brought into application. (orig.) [German] Werkzeuge und Verschleissteile fuer die Verarbeitung von mineralischen Guetern bei erhoehter Temperatur unterliegen sowohl hohem abrasivem Verschleiss als auch hohen mechanischen Lasten. Es werden hartphasenhaltige Verbundwerkstoffe auf Eisen- und Nickelbasis entwickelt und untersucht. Die Fertigung dieser MMC's erfolgt durch heiss isostatisches Pressen (HIP) und anschliessende Waermebehandlung. Durch Diffusion zwischen Hartphasen und Metallmatrix entstehen Gefuege, die bezueglich ihres Widerstandes gegen Abrasivverschleiss bei Raumtemperatur und gegen Korngleitverschliess bei erhoehter Temperatur geprueft werden. Zur Charakterisierung der mechanischen Eigeschaften werden Dreipunktbiegeversuche und thermsiche Ermuedungsversuche durchgefuehrt. Die gewonnenen Erkenntnisse werden genutzt, um einen Werkzeugsatz fuer eine Brikettierpresse herzustellen und in Einsatz zu bringen. (orig.)

All Digital IQ Servo-System for CERN Linacs

CERN Document Server

Broere, J; Garoby, R; Rohlev, A; Serrano, J

2004-01-01

A VME based control system has been developed and built at CERN for the servo loops regulating the field in linac accelerating structures. It is an all-digital system built on a single VME card, providing digital detection, processing, and modulation. It is foreseen to be used, in different versions, for the needs of both present and future CERN hadron linacs. The first application will be in the energy ramping RF chain of the CERN Heavy Ion Linac (linac 3). Design principle and the experimental results are described.

Innovative inspection system for reactor pressure vessels; Innovative Pruefsysteme fuer Reaktordruckbehaelter

Energy Technology Data Exchange (ETDEWEB)

Mertens, K.; Trautmann, H.

1999-08-01

The versatile, compact and modern underwater systems described, the DELPHIN manipulators and MIDAS submarines, are innovative systems enabling RPV inspections at considerably reduced efforts and time, thus reducing the total time required for ISI of reactors. (orig./CB) [Deutsch] Die vorgestellten kleinen, flexiblen und modernen Schwimmsysteme (DELPHIN-Manipulatoren und MIDAS-U-Boote) sind innovative Systeme fuer die Reduzierung der Aufwaende und Zeit zur Pruefung des Reaktordruckbehaelters und damit zur Reduktion der Revisionszeiten der Reaktoranlagen. (orig.)

Oil-free piston compressors for compressed air and gas; Oellose Kolbenkompressoren fuer Druckluft und Gase

Energy Technology Data Exchange (ETDEWEB)

Frefel, B. [Fritz Haug AG, St. Gallen (Switzerland)

2002-11-01

Oil-free compressors are lubricated with special materials in dry operation. The technology was developed 35 years ago by the Swiss company, Fritz Haug AG. Originally developed for 10 - 40 bar, oil-free compressors are now available for both the low-pressure and high-pressure range. [German] Unter dem Begriff ''oellose Kompressoren'' versteht man Verdichter, die in der ganzen Anlage keinen Tropfen Oel verwenden, weder im Fuehrungs- und Verdichtungstell noch im Triebwerk. Die Schmierung erfolgt mit speziellen Materiallen im Trockenlauf. Die Technik der oellosen und trockenlaufenden Kolbenkompressoren wurde bereits vor rund 35 Jahren von der schweizer Firma Fritz Haug AG entwickelt. Anfaenglich war die Anwendung der Verdichtung von Luft auf 10 bis 40 bar vorbehalten. Durch Weiterentwicklungen in neue Materiallen und in der Konstruktion besteht heute auch ein umfangreiches Sortiment an Kompressoren fuer die oellose und trockene Verdichtung von Gasen fuer den Nieder- und Hochdruckbereich. (orig.)

Faster, deeper and safer drilling with tailor-made ``designer tools`` - a new approach in borehole technology; Schneller, weiter und sicherer Bohren mit massgeschneiderten ``Designer Garnituren`` - Ein neuer Ansatz in der Bohrtechnologie

Energy Technology Data Exchange (ETDEWEB)

Reich, M. [Technical Services Baker Hughes INTEQ, Celle (Germany)

1998-12-31

In the past few years, progress has been made in all deep drilling components, but a systemic approach tends to be neglected. Combinations of optimized components alone will not ensure maximum heading rates, long life and economic efficiency. Since about two years ago, research is being made into ``designer tool combinations``. The contribution describes a typical example along with the software used to select the components. (orig.) [Deutsch] In den vergangenen Jahren sind deutliche Fortschritte bei der Entwicklung aller fuer Tiefbohrungen erforderlicher Komponenten erzielt worden. Vermisst wird aber ein Ansatz zum Systemdenken, da leider haeufig das Zusammenspiel dieser Komponenten im praktischen Einsatz nicht beruecksichtigt wird. Die Kombination optimierter Einzelkomponenten allein fuehrt weder zu maximalem Bohrfortschritt noch zu hoechster Lebensdauer oder einem wirtschaftlichen Optimum. Beste Ergebnisse sind vielmehr von Bohrgarnituren zu erwarten, die nach mechanischen und hydraulischen Gesetzmaessigkeiten fuer eine maximale Leistung des Gesamtsystems zusammengestellt werden. Diese relativ einfache Erkenntnis wird erst seit kurzem systematisch in die Praxis umgesetzt. In den letzten zwei Jahren wurden mehrere umfassende Programme zur Optimierung von Bohrgarnituren durchgefuehrt. Die Ergebnisse, die mit diesen `Designer-Bohrgarnituren` erzielt wurden, demonstrieren in eindrucksvoller Weise das Verbesserungspotential. Nachfolgend werden die typischen Komponenten einer `Designer-Garnitur` beschrieben und ein Einblick in die Software gegeben, die zur Optimierung eingesetzt wird. Die erreichten Verbesserungen gegenueber den zuvor benutzten konventionellen Garnituren werden mit Fallbeispielen belegt. (orig.)

Solarsupport for schools. Utilization of sleeping photovoltaic plants for environmental communication; Solarsupport fuer Schulen. Schlafende Fotovoltaikanlagen fuer die Umweltkommunikation nutzen

Energy Technology Data Exchange (ETDEWEB)

Scharp, Michael; Dinziol, Martin; Kliche, Florian

2009-07-15

A central question of today's political debates is: Which means are there for ensuring a long-term and sustainable energy supply? Here, strategies for covering tomorrow's energy supply assign renewable energies a decisive role. In face of constantly rising prices for fossil fuels like carbon, oil and gas or the still open question concerning the removal of atomic waste, these discussions are eminently urgent. In order to confront climatic change, renewable energies are needed, so that also in the future a longterm and sustainable energy supply is secured. Sustainable energy supply is the context for the project Solarsupport, which has been supported by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (FKZ 0327613). The project has been coordinated by the Institute for Environmental Questions (''Unabhaengige Institut fuer Umweltfragen e.V.'' - UFU) and conducted in cooperation with the Institute for Future Studies and Technology Assessment (''Institut fuer Zukunfststudien und Technologiebewertung gGmbH'' - IZT) and the German Society for Solar Energy, Regional Association Berlin-Brandenburg (Deutsche Gesellschaft fuer Sonnenenergie Regionalverband Berlin-Brandenburg e.V. - DGS). Particularly, the project is concerned with the pedagogical use of solar energy at school. Despite the relatively high number of solar plants at schools, only a few use their plants for pedagogical means. The project Solarsupport surveyed schools with solar plants. As the main reason for the insufficient pedagogical use of solar plants the interviewed teachers named the la ck of a pedagogical concept and their colleagues' disinterest, two factors which are able to reinforce one another. Moreover, it became clear that because of their insufficient technical equipment (no displays, no means for evaluating the plants' output, no connection with the school computers and internet) a high number of the

Forest report 2012 for Baden-Wuerttemberg; Waldzustandsbericht 2012 fuer Baden-Wuerttemberg

Energy Technology Data Exchange (ETDEWEB)

Meining, Stefan [Buero fuer Umweltueberwachung, Freiburg (Germany); Wilpert, Klaus v.; Schaeffer, Juergen; Hartmann, Peter; Schumacher, Joerg; Delb, Horst [Forstliche Versuchs- und Forschungsanstalt Baden-Wuerttemberg, Freiburg im Breisgau (Germany); Augustin, Nicole [Bath Univ. (United Kingdom)

2012-07-01

The Forest State Report 2012 systematically records the health status of the forest resources in the country on a scientific basis. Environmental information is measured, recorded and evaluated in the context of forest environmental monitoring using a measuring network. More than a third of the forest area has suffered significant damage. The share of undamaged forest areas has declined by almost one third to 26 percent since last year. Compared to the previous year, the crown damage increased by an average of 2.5 percentage points. More important, however, is the fact that for the two main tree species spruce and beech since the turn of the millennium, there has been a marked increase in the damage intensity for all age groups. [German] Der Waldzustandsbericht 2012 erfasst auf wissenschaftlicher Basis systematisch den Gesundheitszustand der Waldbestaende im Land. Im Rahmen des Forstlichen Umweltmonitorings werden mit Hilfe eines Messnetzes Umweltinformationen gemessen, erfasst und ausgewertet. Ueber ein Drittel der Waldflaeche weist deutliche Schaeden auf. Der Anteil der ungeschaedigten Waldflaechen ist seit dem letzten Jahr um fast ein Drittel auf 26 Prozent zurueckgegangen. Die Kronenschaeden haben gegenueber dem Vorjahr um durchschnittlich 2,5 Prozentpunkte zugenommen. Wichtiger ist jedoch der Befund, dass fuer die beiden Hauptbaumarten Fichte und Buche seit der Jahrtausendwende ein deutlicher Anstieg der Schadensintensitaet fuer alle Altersklassen zu beobachten ist.

The energy-optimized house at Zittau - a new teaching and research buliding for gas and HVAC engineering; Das Niedrigenergiehaus Zittau - ein neues Lehr- und Foschungsgebaeude fuer die Gas- und die Versorgungstechnik

Energy Technology Data Exchange (ETDEWEB)

Wilsdorf, J. [Hochschule fuer Technik, Wirtschaft und Sozialwesen, Zittau/Goerlitz, Zittau (Germany). Fachbereich Bauwesen, Lehrgebiet Gastechnik

1996-06-01

By means of the new energy-optimized building at Zittau, an education and research object, the Hochschule fuer Technik, Wirtschaft und Sozialwesen of Zittau is enhancing the practice-oriented education of students especially in the curricula hvac engineering and structural engineering. As an experimental building it is, at the same time, a complex system demonstrating energy-saving construction and heating and permitting to carry out research and development work. The article describes the concepts and execution of the building. (orig.) [Deutsch] Mit dem neuen Lehr- und Forschungsgebaeude `Niedrigenergiehaus Zittau` verbessert die Hochschule fuer Technik, Wirtschaft und Sozialwesen Zittau die praxisbezogene Ausbildung der Studenten vor allem in den Studiengaengen der Ver- und Entsorgungstechnik und des Bauingenieurwesens. Zugleich ist es als Experimentalbau ein komplexes System fuer energiesparendes Bauen und Heizen und bietet hervorragende Voraussetzungen fuer die Durchfuehrung von Forschungs- und Entwicklungsarbeiten. Im Artikel werden Konzepte und Einrichtungen des Gebaeudes beschrieben. (orig.)

48. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie. Joint annual meeting of the DGNR and OeGNR. Abstracts; 48. Jahrestagung der Deutschen Gesellschaft fuer Neuroradiologie. Gemeinsame Jahrestagung der DGNR und OeGNR. Abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-09-15

The conference proceedings of the 48. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie contain abstracts on the following issues: neuro-oncological imaging, multimodal imaging concepts, subcranial imaging, spinal codes, interventional neuroradiology, innovative techniques like high-field MRT and hybrid imaging methods, inflammable and metabolic central nervous system diseases and epilepsy.

Device for applying organic chemicals to lysimeter surfaces; Applikationsvorrichtung fuer organische Chemikalien auf Lysimeteroberflaechen

Energy Technology Data Exchange (ETDEWEB)

Schroll, R. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Inst. fuer Bodenoekologie

1999-02-01

One of the aims of environmental research at the GSF Research Centre for the Environment and Health is to determine the behaviour of environmentally consequential chemicals in terrestrial ecosystems under as natural conditions as possible. The GSF lysimeter plant in Neuherberg permits studying the environmental behaviour of organic chemicals in different soils. Collaborators at GSF have developed a means of applying -14-marked substances in field lysimeters so as to be able to refind released chemicals, identify their conversion products and set up mass balances for the chemicals. [Deutsch] Ein Ziel der Umweltforschung im GSF-Forschungszentrum fuer Umwelt und Gesundheit ist es, das Verhalten von Umweltchemikalien in terrestrischen Oekosystemen unter moeglichst natuerlichen Bedingungen zu bestimmen. In der GSF-Lysimeteranlage Neuherberg kann das Umweltverhalten von Organika in verschiedenen Boeden untersucht werden. Zur Wiedererkennung der ausgebrachten Chemikalie bzw. zur Identifizierung aus ihr entstandener Umwandlungsprodukte und letztendlich auch zur Erstellung einer Massenbilanz fuer das ausgebrachte Praeparat wurde in der GSF die Moeglichkeit geschaffen, {sup 14}C-markierte Substanzen in Freilandlysimetern applizieren zu koennen. (orig.)

Bundesamt fuer Strahlenschutz (BfS). Annual report 2011; Bundesamt fuer Strahlenschutz (BfS). Jahresbericht 2011

Energy Technology Data Exchange (ETDEWEB)

Ebermann, Lutz (comp.)

2012-07-01

The annual report 2011 of the Bundesamt fuer Strahlenschutz (BfS) includes the following main articles: Fukushima and the consequences, new power lines across Germany and the management of radioactive wastes in Germany. Further topics of the BfS were reasonable exposure to sun and skin cancer prevention, individual health assessment of lung cancer with low-dose CT, occupational radiation exposure in medicine, radiation protection at setting up digital radio of security authorities and organizations, importance of laboratory ring experiments for incorporation monitoring, defence against nuclear hazards: cooperation and exercises in 2011, new developments with regard to radioactivity in drinking water, reportable events in nuclear facilities in 2011, decommissioning of a permanently shut down NPP. The environmental research program of the Federal Environmental ministry - research for strengthening nuclear safety and radiation protection: German uranium miners biobank: consequences of uranium mining and radiological impacts, German miners cohort study, health effects of strong magnetic fields of NMR imaging, radiation exposure due to nuclear medical examinations, national survey on the radio-cesium contamination of wild boars.

FASTBUS readout system for the CDF DAQ upgrade

International Nuclear Information System (INIS)

Andresen, J.; Areti, H.; Black, D.

1993-11-01

The Data Acquisition System (DAQ) at the Collider Detector at Fermilab is currently being upgraded to handle a minimum of 100 events/sec for an aggregate bandwidth that is at least 25 Mbytes/sec. The DAQ System is based on a commercial switching network that has interfaces to VME bus. The modules that readout the front end crates (FASTBUS and RABBIT) have to deliver the data to the VME bus based host adapters of the switch. This paper describes a readout system that has the required bandwidth while keeping the experiment dead time due to the readout to a minimum

A fast readout system for scintillation detectors

International Nuclear Information System (INIS)

Steijger, J.; Kok, E.; Kwakkel, E.; Visschers, J.L.; Zwart, A.N.M.

1991-01-01

A system of fast readout electronics for segmented scintillation detectors has been constructed and is now operational. Instead of delaying the analog signals in long coaxial cables, they are digitized immediately and stored in dual-port memories, while the trigger decision is being made. A VMEbus system collects the data from these memories on the data acquisition modules within one crate. Several VME crates are connected via a transputer network to transport the data to an event builder. A separate transputer network is used to perform the VME cycles, needed for the computer-controlled tuning of the experiment. (orig.)

Diagnostic systems for motor vehicles. From diagnosis and moni; Diagnosesysteme fuer Kraftfahrzeuge. Von der Diagnose und Ueberwachung bis zum E-Commerce

Energy Technology Data Exchange (ETDEWEB)

Baeker, B.; Forchert, T. [DB DaimlerChrysler AG, Stuttgart (Germany). Abt. FT2/ED

2001-07-01

Starting from the technical necessity of having monitoring and diagnostic systems in all compartments of modern passenger cars, the contribution discusses how new service concepts can be integrated as well. New diagnostic approaches are outlined which, in addition to failure detection, also enable optimization of the development process chain. At the same time, the depth of diagnosis is improved in order to obtain a multitude of new meta information while driving, which will serve as a basis for installing new services in the vehicle. [German] Gestiegend Komfortanforderungen und die gewachsene Komplexitaet in heutigen und zukuenftigen Elektrik/Elektronik-Systemen fuer Kraftfahrzeuge erfordern leistungsfaehige Diagnosesysteme. Um gleichzeitig im Rahmen der Globalisierung die Wertschoepfungskette weiter zu staerken, muessen als logische Konsequenz des Marktes Ansaetze fuer neuartige Dienstleistungskonzepte erdacht und integriert werden. Dieser Aufsatz diskutiert ausgehend von der technischen Notwendigkeit zukuenftiger Ueberwachungs- und Diagnosesysteme in allen Bereichen moderner Kraftfahrzeuge moegliche Wege zu derartigen Ansaetzen denkbarer systemuebergreifender Dienstleistungsschritte am Fahrzeug. Dabei werden technologisch neuartige Diagnoseansaetze skizziert, die neben einer Fehlererkennung auch die Optimierung der Entwicklungsprozesskette zulassen. Eine gleichzeitige Erhoehung der Diagnosetiefe schafft die Grundlage, eine Vielzahl neuer Meta-Informationen waehrend der Fahrt zu generieren. Diese bilden die Basis fuer neue Dienste am Fahrzeug. (orig.)

Design of a control system of the linac for SPring-8

International Nuclear Information System (INIS)

Yoshikawa, H.; Itoh, Y.; Kumahara, T.

1992-01-01

The design of a control system of the linac which is a large scale system including many unstable components like klystrons and modulators. The linac for SPring-8 requires to be operated automatically for injection to the synchrotron. Under these conditions, we chose a distributed control system architecture of a single layer net-work to simplify the protocol of the net-work between the linac, the booster synchrotron and the storage ring. A VME computer of 68030 is put in every modulator of the linac, and all control signals are gathered to the nearest VME computer. OS-9 and OS-9000 are on trial for investigation of the performances. TCP/IP is tentatively chosen as a protocol of the net-work, but we expect that MAP/MMS makes a high performance, and we are preparing a test of it. (author)

All Digital IQ Servo-System for CERN Linacs

CERN Document Server

Rohlev, A; Garoby, R

2003-01-01

A new VME based system has been developed and built at CERN for the servo loops regulating the field in the linac accelerating structure. It makes use of high speed digital In-phase/Quadrature (IQ) detection, digital processing, and digital IQ modulation. The digital processing and IQ modulation is done in a single PLD. The system incorporates continually variable set points, iterative learning, feed forward as well as extensive diagnostics and other features well suited for digital implementations. Built on a single VME card, it will be first used in the energy ramping RF chain of the CERN Heavy Ion Linac (linac 3) and later for upgrading the present proton linac (linac 2). This system serves also as a prototype for the future Superconducting Proton Linac (SPL). The design principle and the experimental results are described.

Quality assurance for the incorporation surveillance in Germany; Qualitaetssicherung fuer die Inkorporationsueberwachung in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Buchholz, Werner; Gerstmann, Udo; Hartmann, Martina; Loescher, Simone; Meisenberg, Oliver; Woidy, Patrick [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). FB Strahlenschutz und Gesundheit

2017-08-01

The coordination center of the Bundesamt fuer Strahlenschutz is performing annual ring experiments for in-vivo and in-vitro measuring points. This procedure allows checking the measuring data and the competence of the personnel. In the last years these tests included also radionuclides that are important in radiation emergency protection. Case studies for dose determination based on incorporation scenarios are included.

Customer care policy for utilities - demonstrated with the example of a call center; Customer Care fuer EVU - Wirkungszusammenhaenge am Beispiel des Telefon-Service

Energy Technology Data Exchange (ETDEWEB)

Weisse, D. [Consulting und Services, pdv Unternehmensberatung GmbH, Roesrath (Germany)

2000-01-10

Customer care policy, for preventing change to another provider and consolidating customer loyalty, is becoming a strategic (powerful) instrument for a utility in the competitive market. But what does this really imply for the day-to-day process of dealing with client-specific operations and workflows? The article describes the interactions between strategic marketing for ensuring client satisfaction and the resulting requirements to be met by a utility's call center, and also describes the key 'parameters' and requirements for successful day-to-day management of call centers. (orig./CB) [German] Customer Care zur Reduzierung der Wechselbereitschaft bzw. zur Erhoehung der Kundenbindung wird fuer EVU zu einem strategischen Instrument im Kampf um die Kunden. Aber was bedeutet dies fuer die operative Abwicklung der kundenbezogenen Geschaeftsprozesse? Der Verfasser erlaeutert die Zusammenhaenge zwischen dem strategischen Ziel der Kundenzufriedenheit und der operativen Umsetzung des Telefon-Service und beschreibt die 'Stellschrauben', die fuer diesen Zweck bei der Planung aber auch im taeglichen Management eines Call Centers zur Verfuegung stehen. (orig.)

Water emission inventory for the Federal Republic of Germany; Emissionsinventar Wasser fuer die Bundesrepublik Deutschland

Energy Technology Data Exchange (ETDEWEB)

Boehm, E.; Hillenbrand, T.; Marscheider-Weidemann, F.; Schempp, C. [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Fuchs, S.; Scherer, U. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Siedlungswasserwirtschaft; Luettgert, M. [RISA Sicherheitsanalysen GmbH, Berlin (Germany)

2000-11-01

Within the frame of this project, a concept for setting up exemplary emission inventories for water was put forward. An overview is given of the international activities on emission inventories and the status of national emission inventories. Based on the data situation in Germany, it was necessary to include both plant-specific, aggregated and calculated data of the point sources in the inventories. Due to their increasing significance, diffuse material emissions into water were also taken into account. Based on the conceptual work, exemplary emission inventories were compiled for nitrogen, phosphorous and adsorbable organic combined halides (AOX) as well as the heavy metals arsenic, cadmium, chrome, copper, mercury, nickel, lead and zinc. These were evaluated according to the areas of origin (sectors) or the emission paths as well as according to the large river basins Danube, Rhine, Ems, Weser, Elbe, Oder, North Sea and Baltic Sea. In addition, lists of the ten largest industrial direct dischargers were compiled. (orig.) [German] Im Rahmen dieses Vorhabens wurde ein Konzept fuer die Erstellung von beispielhaften Emissionsinventaren fuer Gewaesser erarbeitet. Es wird ein Ueberblick ueber die internationalen Aktivitaeten zu Emissionsinventaren und den Stand beim Aufbau von nationalen Emissionsinventaren gegeben. Auf Grund der Datensituation in Deutschland war es erforderlich, dass sowohl anlagenspezifische als auch aggregierte sowie berechnete Daten der Punktquellen in die Inventare einbezogen wurden. Wegen ihrer zunehmenden Bedeutung werden die diffusen Stoffeintraege in die Gewaesser ebenfalls beruecksichtigt. Aufbauend auf den konzeptionellen Arbeiten wurden beispielhafte Emissionsinventare fuer Stickstoff, Phosphor und adsorbierbare organisch gebundene Halogene (AOX) sowie die Schwermetalle Arsen, Cadmium, Chrom, Kupfer, Quecksilber, Nickel, Blei und Zink zusammengestellt. Die Auswertung erfolgte sowohl nach den Herkunftsbereichen (Branchen) bzw. den

Life cycle assessment of different disposal routes of sewage sludge; Oekobilanz verschiedener Entsorgungsmoeglichkeiten fuer Klaerschlamm

Energy Technology Data Exchange (ETDEWEB)

Chassot, G.M.; Candinas, T. [Eidgenoessische Forschungsanstalt fuer Agraroekologie und Landbau (FAL), Inst. fuer Umweltschutz und Landwirtschaft IUL Liebefeld, Bern (Switzerland)

1998-11-01

The ecological impact of six different disposal routes for sewage sludge of a major sewage treatment plant (three options for agricultural use in liquid, dried and limetreated form, and three options of incineration in a mono-sewage sludge incineration plant, a cement factory and a `Schwel-Brenn` type incinerator for municipal solid waste) has been studied with an comprehensive inventory and five impact assessment methods. Three methods show the important role of soil pollution. Existing methods are not yet able to consider all the factors necessary. The inventories should be completed concerning natural phosphorus resources and organic micropollutants. (orig.) [Deutsch] Sechs Entsorgungsvarianten (drei betreffen die landwirtschaftliche Verwendung in fluessiger, thermisch getrockneter und gekalkter Form und drei die Verbrennung in einer Schlammverbrennungsanlage, einem Zementofen und einer Schwel-Brenn-Anlage fuer Kehricht) fuer den Klaerschlamm einer grossen ARA werden mittels Inventarisierung der verursachten Umweltbelastung und fuenf Bewertungsmethoden untersucht. Drei Methoden zeigen die wichtige Rolle der Bodenbelastung. Die verfuegbaren Methoden koennen aber wichtige Einflussgroessen noch nicht beruecksichtigen. Ferner sollten die Inventare bezueglich P-Ressourcen und organischen Schadstoffen vervollstaendigt werden. (orig.)

Thermal solar systems in domestic buildings. Evaluation of the Hessen state funding programme for thermal solar systems; Thermische Solaranlagen in Wohngebaeuden. Auswertung des Solarthermischen Foerderprogrammes des Landes Hessen fuer die Jahre 1992 - 1996

Energy Technology Data Exchange (ETDEWEB)

Lackschewitz, U.

1998-11-01

The report presents statistical information on all solar systems that received state funds. Problems concerning the installation of solar systems are gone into. The report focuses on service water heating systems both for single-family buildings and multiple dwellings. Further, four enquiries were carried out among operators and producers of thermal solar systems, and 29 state-funded solar systems were visited and investigated in situ. Based on the analysis of the funding programme so far, further measures are suggested. [German] Nach einer fuenfjaehrigen Laufzeit des Solarthermischen Foerderprogramms fuer Wohngebaeude beauftragte das Hessische Ministerium fuer Umwelt, Energie, Jugend, Familie und Gesundheit die Gesellschaft fuer umweltfreundliche Technologie e.V. in Kassel mit einer Auswertung des Foerderprogrammes fuer die Jahre 1992 bis 1996. Die Auswertung gibtzunaechst einen Ueberblick ueber alle gefoerderten Solaranlagen. Darueber hinaus wurden wichtige Fragestellungen, die bei der Installation thermischer Solaranlagen in Wohngebaeuden auftreten, anhand einer groesseren Zahl gefoerderter Solaranlagen untersucht. Schwerpunkte dieser Untersuchung bilden Solaranlagen zur Brauchwassererwaermung zum einen in Einfamilienhaeusern und zum anderen in groesseren Mehrfamilienhaeusern. Neben der Auswertung der Foerderantraege wurden dazu vier Umfragen bei Betreibern und Anbietern thermischer Solaranlagen durchgefuehrt und 29 gefoerderte Solaranlagen besichtigt. Aufbauend auf der Analyse des bisherigen Foerderprogrammes werden Vorschlaege fuer weitere Massnahmen des Landes zur Foerderung thermischer Solaranlagen unterbreitet. (orig.)

Pulse-width modulation for small heat pump installations - Phase 4; Pulsbreitenmodulation fuer Kleinwaermepumpenanlagen. Phase 4: Erweiterung der PBM-Regler fuer Kombianlagen

Energy Technology Data Exchange (ETDEWEB)

Bianchi, M.; Shafai, E. [Eidgenoessische Technische Hochschule (ETH), Institut fuer Mess- und Regeltechnik, Zuerich (Switzerland); Gabathuler, H.R.; Mayer, H. [Gabathuler AG, Beratende Ingenieure, Diessenhofen (Switzerland)

2005-07-01

This final report for the Swiss Federal Office of Energy (SFOE) presents the results of the fourth phase of a project that investigated three types of pulse-width modulation (PWM) controllers that were developed during its first two phases. A third phase monitored the controllers when used in a simulated environment and for a real-life heat pump. The report discusses the fourth phase of the project, in which the controller was further developed and tested using the building emulation developed in the third phase. The functioning of the self-regulating controller and its use of meteorological data is described and the savings to be made in heating costs are discussed.

Hybridization and control of a mobile direct methanol fuel cell system; Hybridisierung und Regelung eines mobilen Direktmethanol-Brennstoffzellen-Systems

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, Joerg Christoph

2010-07-01

for the dimensioning of the fuel cell as well as of the energy storage unit. Variation of parameters results in a minimum required fuel cell power of 1.3 kW as well as a minimum energy density of 66 Wh/l or a minimum power density of 355 W/l for the energy storage unit, respectively. The high energy density required and the fact that the energy storage unit must always be operated at a partial state of charge leads to faster aging, particularly of lead-acid batteries, so that a lithium battery is eventually chosen as an energy storage unit. (orig.) [German] Direktmethanol-Brennstoffzellen (DMFCs) zeichnen sich dadurch aus, dass sie die chemische Energie des fluessig zugefuehrten Brennstoffs Methanol direkt in elektrische Energie umwandeln. Methanol hat eine hohe Energiedichte und laesst sich vergleichsweise einfach speichern. Aufgrund dieser Vorteile eignen sich Direktmethanol-Brennstoffzellen- Systeme z. B. als Batterieersatz fuer den Bereich leichte Traktion in der kW-Klasse. Da das Nachtanken im Vergleich zum Laden einer Batterie viel schneller realisierbar ist, folgt hieraus ein nahezu unterbrechungsfreier Betrieb. Das Ziel der vorliegenden Arbeit ist es daher ein Direktmethanol-Brennstoffzellen-System fuer den Bereich leichte Traktion zu entwickeln. Die systemtechnische Entwicklung und Charakterisierung eines mobilen Direktmethanol-Brennstoffzellen-Systems erfolgt zuerst allgemein und anschliessend angewandt auf das Beispiel Horizontalkommissionierer aus der Klasse der Flurfoerderfahrzeuge. Hierfuer soll sowohl ein Hybridisierungs- als auch ein Regelungskonzept entwickelt werden. Die gewaehlte Vorgehensweise gliedert sich in die Charakterisierung der Anwendung, die theoretische Konzeptentwicklung und eine abschliessende Systemanalyse mithilfe von Untersuchungen am Teststand und Simulationen. Aus der Charakterisierung folgt der charakteristische Fahrzyklus der Anwendung. Die Eckdaten, wie maximale Peakleistungen beim Beschleunigen und Bremsen sowie die

Development and optimization of processes for producing highly efficient large-area PV modules based on amorphous silicon. Final report; Entwicklung und Optimierung von Prozessen zur Fertigung hocheffizienter grossflaechiger a-Si-PV-Module. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Maurus, H.; Ruebel, H.; Frammelsberger, W.; Geyer, R.; Lechner, P.; Psyk, W.; Schade, H.

2001-07-31

This report contains fundamental topics on further developing the PV technology based on amorphous silicon (a-Si), namely upscaling of laboratory processes to production size areas, improvement of patterning processes to minimize area losses due to monolithic series connection of cells, speeding up individual process steps while maintaining their reproducibility, long-term stability of encapsulated modules. Among the superstrate technologies of the competitors, the module efficiency has reached an international standard. The throughput of the pilot production line has been substantially increased by improving the process cycle times and the equipment uptime. (orig.) [German] Der vorliegende Bericht beinhaltet grundlegende Arbeiten zur Weiterentwicklung der a-Si PV-Technologie. Er behandelt die Themen: Aufskalierung von kleinflaechiger Laborabscheidetechnologie auf groessere industrierelevante Flaechen, Verbesserung und Optimierung von Strukturierungsverfahren fuer hohe Flaechenausnutzung, Beschleunigung und Reproduzierbarkeit der Einzelprozesse sowie Langzeitstabilitaet von verkapselten Modulen. Der Modulwirkungsgrad hat - verglichen mit gleichartiger Technologie von Wettbewerbern - internationalen Standard erreicht. Der Durchsatz der Pilotfertigungsanlage konnte aufgrund der Verbesserung der wirtschaftlichen Kenngroessen Anlagenverfuegbarkeit und Taktzeit wesentlich erhoeht werden. (orig.)

An Experiment Support Computer for Externally-Based ISS Payloads

Science.gov (United States)

Sell, S. W.; Chen, S. E.

2002-01-01

The Experiment Support Facility - External (ESF-X) is a computer designed for general experiment use aboard the International Space Station (ISS) Truss Site locations. The ESF-X design is highly modular and uses commercial off-the-shelf (COTS) components wherever possible to allow for maximum reconfigurability to meet the needs of almost any payload. The ESF-X design has been developed with the EXPRESS Pallet as the target location and the University of Colorado's Micron Accuracy Deployment Experiment (MADE) as the anticipated first payload and capability driver. Thus the design presented here is configured for structural dynamics and control as well as optics experiments. The ESF-X is a small (58.4 x 48.3 x 17.8") steel and copper enclosure which houses a 14 slot VME card chassis and power supply. All power and data connections are made through a single panel on the enclosure so that only one side of the enclosure must be accessed for nominal operation and servicing activities. This feature also allows convenient access during integration and checkout activities. Because it utilizes a standard VME backplane, ESF-X can make use of the many commercial boards already in production for this standard. Since the VME standard is also heavily used in industrial and military applications, many ruggedized components are readily available. The baseline design includes commercial processors, Ethernet, MIL-STD-1553, and mass storage devices. The main processor board contains four TI 6701 DSPs with a PowerPC based controller. Other standard functions, such as analog-to-digital, digital-to-analog, motor driver, temperature readings, etc., are handled on industry-standard IP modules. Carrier cards, which hold 4 IP modules each, are placed in slots in the VME backplane. A unique, custom IP carrier board with radiation event detectors allows non RAD-hard components to be used in an extended exposure environment. Thermal control is maintained by conductive cooling through the copper

Diffusion-weighted imaging of the pancreas; Diffusionsbildgebung des Pankreas

Energy Technology Data Exchange (ETDEWEB)

Gruenberg, K. [Deutsches Krebsforschungszentrum (DKFZ) Heidelberg, Abteilung Radiologie, E010, Heidelberg (Germany); Grenacher, L.; Klauss, M. [Universitaetsklinikum Heidelberg, Abt. Diagnostische und Interventionelle Radiologie, Heidelberg (Germany)

2011-03-15

Diffusion-weighted imaging (DWI) has increasingly gained in importance over the last 10 years especially in cancer imaging for differentiation of malignant and benign lesions. Through development of fast magnetic resonance imaging (MRI) sequences DWI is not only applicable in neuroradiology but also in abdominal imaging. As a diagnostic tool of the pancreas DWI enables a differentiation between normal tissue, cancer and chronic pancreatitis. The ADC values (apparent diffusion coefficient, the so-called effective diffusion coefficient) reported in the literature for healthy pancreatic tissue are in the range from 1.49 to 1.9 x 10{sup -3} mm{sup 2}/s, for pancreatic cancer in the range from 1.24 to 1.46 x 10{sup -3} mm{sup 2}/s and for autoimmune pancreatitis an average ADC value of 1.012 x 10{sup -3} mm{sup 2}/s. There are controversial data in the literature concerning the differentiation between chronic pancreatitis and pancreatic cancer. Using DWI-derived IVIM (intravoxel incoherent motion) the parameter f (perfusion fraction) seems to be advantageous but it is important to use several b values. In the literature the mean f value in chronic pancreatitis is around 16%, in pancreatic cancer 8% and in healthy pancreatic tissue around 25%. So far, DWI has not been helpful for differentiating cystic lesions of the pancreas. There are many references with other tumor entities and in animal models which indicate that there is a possible benefit of DWI in monitoring therapy of pancreatic cancer but so far no original work has been published. (orig.) [German] Die Diffusionsbildgebung (''diffusion-weighted imaging'', DWI) gewann in den letzten 10 Jahren insbesondere in der Tumorbildgebung zur Unterscheidung zwischen malignen und benignen Laesionen zunehmend an Bedeutung. Durch Entwicklung schnellerer MR-Sequenzen ist sie nicht nur in der Neuroradiologie, sondern auch in der Abdomenbildgebung einsetzbar. In der Pankreasdiagnostik ermoeglicht sie

DRM2: the readout board for the ALICE TOF upgrade

CERN Document Server

Falchieri, Davide

2018-01-01

For the upgrade of the ALICE TOF electronics, we have designed a new version of the readout board, named DRM2, a card able to read the data coming from the TDC Readout Module boards via VME. A Microsemi Igloo2 FPGA acts as the VME master and interfaces the GBTx link for transmitting data and receiving triggers and a low-jitter clock. Compared to the old board, the DRM2 is able to cope with faster trigger rates and provides a larger data bandwidth towards the DAQ. The results of the measurements on the received clock jitter and data transmission performances in a full crate are given.

Utilization scenarios for driving support systems in cargo traffic and their evaluation; Einsatzszenarien fuer Fahrerassistenzsysteme im Gueterverkehr und deren Bewertung

Energy Technology Data Exchange (ETDEWEB)

Henning, K.; Preuschoff, E. (eds.)

2003-07-01

The report presents a summary of the project of the above title (EFAS project). While earlier projects focused on the technical side, EFAS is the first to present a systematic analysis, presentation and evaluation of the parameters influencing driving support systems. With the aid of a systemic analysis, the key influencing factors are defined and analyzed, and three scenarios are developed which take account of user-oriented, organizational, operational, technical, infrastructural and legal aspects. The scenarios are evaluated with the aid of driving and traffic simulations in the fields of humans, organization and technology, and actions are recommended on this basis for driving support systems in cargo transport. [German] Der Bericht fasst die Ergebnisse des Projektes ''Einsatzszenarien fuer Fahrerassistenzsysteme im Gueterverkehr'' (EFAS) zusammen. Bisher wurde die Thematik Fahrerassistenzsysteme hauptsaechlich auf der Seite der Fahrzeugtechnik vorangetrieben. Das Projekt EFAS stellt nun zum ersten Mal eine umfassende Analyse, Darstellung und Bewertung dar. Mit Hilfe einer systemischen Analyse werden die wesentlichen Einflussfaktoren fuer die Einbindung von Fahrerassistenzsystemen in das Gesamtsystem ''Verkehr'' bestimmt und untersucht. Hieraus werden drei Einsatzszenarien entwickelt, die nutzerbezogene, organisatorische, betriebliche, fahrzeugtechnische, infrastukturelle und rechtliche Aspekte zu Zukunftsbildern zusammenfuegen. Die Szenarien werden mit Hilfe von Fahr- und Verkehrssimulationen in den Bereichen Mensch, Organisation und Technik bewertet. Aus den Ergebnissen werden konkrete Handlungsempfehlungen fuer den Einsatz von Fahrerassistenzsystemen im Strassengueterverkehr abgeleitet. (orig.)

Development of new layer systems for sliding bearings under high mechanical and tribological stress. Final report; Entwicklung neuer Schichtsysteme fuer den Einsatz bei mechanisch-tribologisch hochbeanspruchten Gleitlagern. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Mathias, M.; Herrmann, B.

1995-12-31

The report describes the sputtering technique as a coating method for sliding bearings of high-speed diesel engines. The project aimed at the development of a heavy-duty, wear-resistant sputtered layer on a copper-lead basis for sliding bearings. (HW) [Deutsch] Es wird berichtet ueber die Einfuehrung der Sputtertechnik als Beschichtungsverfahren fuer Gleitlager fuer schnell laufende Dieselmotoren. Ziel des Projektes war die Entwicklung einer hochbelastbaren, verschleissfesten Gleitlager-Sputterschicht auf Kupfer-Blei-Basis. (HW)

Preventive strategy for nanomaterials. Special report; Vorsorgestrategien fuer Nanomaterialien. Sondergutachten

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

knowledge of which nanomaterials are used in which products. The SRU sees a need for greater transparency here to enable public authorities to react swiftly whenever evidence of health or environmental risks arises. Consumers should in principle enjoy freedom of choice. For this reason the SRU recommends creating a registry of nanoproducts and supplementation of existing labelling requirements. [German] In diesem Sondergutachten gibt der Sachverstaendigenrat fuer Umweltfragen (SRU) Empfehlungen fuer einen verantwortungsvollen, vorsorgeorientierten Umgang mit dieser Technologie. Ziel ist es, Innovationen zu ermoeglichen, aber auch Risiken fruehzeitig zu erkennen und zu mindern. Der SRU sieht dringenden Handlungsbedarf bei der Regulierung von Nanomaterialien und fordert mehr Transparenz bei Verbraucherprodukten ein. Sobald ein begruendeter Anlass zur Besorgnis besteht, muss nach dem Vorsorgeprinzip gehandelt und zwischen Risiken und Chancen abgewogen werden. Um dies zu ermoeglichen, sind zahlreiche rechtliche Aenderungen erforderlich. Nanomaterialien und Nano-Produkte unterliegen grundsaetzlich dem Stoff-, Produkt- und Umweltrecht. In der Praxis fuehren aber die Besonderheiten von Nanomaterialien dazu, dass nicht alle rechtlichen Instrumente greifen. So werden Nanomaterialien bei der Registrierung von Chemikalien und bei der Zulassung von Produkten nicht immer separat erfasst und damit bewertet. Der SRU empfiehlt, solche nanospezifischen Regelungsluecken schnell zu schliessen. Dazu ist es notwendig, Nanomaterialien verbindlich zu definieren, sie grundsaetzlich bei der Risikobewertung von Chemikalien wie eigenstaendige Stoffe zu behandeln und mit einem eigens auf sie zugeschnittenen Datensatz zu registrieren. Dabei duerfen die Risiken von Nanomaterialien nicht pauschal bewertet werden, weil manche Materialien nach heutigem Kenntnisstand unbedenklich sind, waehrend bei anderen ein Risikopotenzial besteht. Einen Anlass zur Besorgnis sieht der SRU vor allem bei der Verwendung von

Timing system for PLS

International Nuclear Information System (INIS)

Chang, S.S.; Kim, M.S.; Won, S.C.; Choi, S.J.

1991-01-01

The PLS timing system consists of a master oscillator, a repetition rate pulse generator, a storage ring rf synchronizing system, and a rf driver and kicker trigger system composed of a fixed delay module and variable delay modules. All the timing modules are installed in the VME crates and controlled by the 32 bit microprocessors, and communicating with the Host computer via Ethernet. This paper describes the architectural design of this system as well as the requirements of performance

Selection of procedures for inservice inspections; Auswahl der Verfahren fuer wiederkehrende Pruefungen

Energy Technology Data Exchange (ETDEWEB)

Brast, G [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Britz, A [Bayernwerk AG, Muenchen (Germany); Maier, H J [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Seidenkranz, T [TUEV Energie- und Systemtechnik GmbH, Mannheim (Germany)

1998-11-01

At present, selection of procedures for inservice inspection has to take into account the legal basis, i.e. the existing regulatory codes, and the practical aspects, i.e. experience and information obtained by the general, initial inservice inspection or performance data obtained by the latest, recurrent inspection. However, regulatory codes are being reviewed to a certain extent in order to permit integration of technological progress. Depending on the degree of availability in future, of inspection task-specific, sensitive and qualified NDE techniques for inservice inspections (`risk based ISI`), the framework of defined inspection intervals, sites, and detection limits will be broken up and altered in response to progress made. This opens up new opportunities for an optimization of inservice inspections for proof of component integrity. (orig./CB) [Deutsch] Zur Zeit muss sich die Auswahl der Pruefverfahren an den gueltigen Regelwerken und, da es sich um wiederkehrende Pruefungen handelt, an der Basispruefung bzw. der letzten wiederkehrenden Pruefung orientieren. Jedoch vollzieht sich zur Zeit eine Oeffnung der Regelwerke, mit der man auch der Weiterentwicklung der Prueftechniken Rechnung traegt. In dem Masse, wie zukuenftig auf die Pruefaufgabe/Pruefaussage optimal abgestimmte und qualifizierte Prueftechniken mit einer hohen Nachweisempfindlichkeit am Bauteil fuer zielgerichtete wiederkehrende Pruefungen (als `risk based ISI`) zur Verfuegung stehen, wird der Rahmen mit festgelegten Pruefintervallen, Prueforten und festen Registriergrenzen gesprengt und variabel gestaltet werden koennen. Damit ergeben sich neue Moeglichkeiten fuer eine Optimierung der WKP zum Nachweis der Integritaet des Bauteils. (orig./MM)

New aspects from legislation, guidelines and safety standards for MRI; Neues aus Gesetzen, Richtlinien und Sicherheitsstandards fuer die MRT

Energy Technology Data Exchange (ETDEWEB)

Muehlenweg, M. [Krankenhaus Martha-Maria Halle-Doelau, Institut fuer Radiologie, Halle (Saale) (Germany); Schaefers, G. [MR:comp GmbH, Gelsenkirchen (Germany); Trattnig, S. [Exzellenzzentrum Hochfeld-Magnetresonanz, Medizinische Universitaet Wien, Universitaetsklinik fuer Radiodiagnostik, Wien (Austria)

2015-08-15

Betriebsanleitung der MR-Scanner. Die verpflichtenden Inhalte der Betriebsanleitung werden in einer zentralen Norm der International Electrotechnical Commission (IEC) 60601-2-33 geregelt. In dieser Norm wurde juengst die Anwendung statischer Magnetfelder in der MRT bis zu 8 Tesla (T) in der klinischen Routine (kontrollierte Betriebsart 1. Stufe) zugelassen. Die ebenfalls notwendige CE-Zertifizierung der Ultrahochfeldscanner (7-8 T) in Europa ist fuer zukuenftige Geraete zu erwarten. Bestehende Installationen werden nicht automatisch zertifiziert, sondern behalten ihren experimentellen Status. Die aktuelle Erweiterung der IEC 60601-2-33 fuehrt eine neue Zusatzoption, die sog. ''fixed parameter option'' (FPO) ein. Diese Option kann zusaetzlich zu den etablierten Betriebsarten geschaltet werden und definiert eine fixe Geraetekonstellation und bestimmte Parameter des Energieoutputs von MR-Scannern, die zukuenftig die Untersuchungen von Implantatpatienten vereinfachen soll. Die Beschaeftigung schwangerer Mitarbeiterinnen in einer MRT-Einrichtung ist nach wie vor nicht allgemein in Europa geregelt. In Deutschland und Oesterreich wurden 2014 in Teilregionen Beschaeftigungsverbote fuer Schwangere und Stillende im der MR-Kontrollzone (0,5 mT) erteilt. Zugrunde liegt die meist ungeklaerte Frage der Anwendbarkeit von Grenzwerten fuer Beschaeftigte (Extremitaetenexposition fuer statische Magnetfelder bis 8 T erlaubt) oder der Grenzwerte fuer die Allgemeinbevoelkerung (maximal bis 400 mT). Das Verwerfen von Muttermilch nach i.v.-Gabe von gadoliniumhaltigen Kontrastmitteln bei einer stillenden Frau wird laut Gesellschaft fuer urogenitale Radiologie (ESUR) nur noch bei Gabe von Kontrastmitteln der Nephrogenic-systemic-fibrosis(NSF)-Hochrisikoklasse empfohlen. (orig.)

DATA ACQUISITION FOR SNS BEAM LOSS MONITOR SYSTEM

International Nuclear Information System (INIS)

YENG, Y.; GASSNER, D.; HOFF, L.; WITKOVER, R.

2003-01-01

The Spallation Neutron Source (SNS) beam loss monitor system uses VME based electronics to measure the radiation produced by lost beam. Beam loss signals from cylindrical argon-filled ion chambers and neutron detectors will be conditioned in analog front-end (AFE) circuitry. These signals will be digitized and further processed in a dedicated VME crate. Fast beam inhibit and low-level, long-term loss warnings will be generated to provide machine protection. The fast loss data will have a bandwidth of 35kHz. While the low level, long-term loss data will have much higher sensitivity. This is further complicated by the 3 decade range of intensity as the Ring accumulates beam. Therefore a bandwidth of 100kHz and dynamic range larger than 21 bits data acquisition system will be required for this purpose. Based on the evaluation of several commercial ADC modules in preliminary design phase, a 24 bits Sigma-Delta data acquisition VME bus card was chosen as the SNS BLM digitizer. An associated vxworks driver and EPICS device support module also have been developed at BNL. Simulating test results showed this system is fully qualified for both fast loss and low-level, long-term loss application. The first prototype including data acquisition hardware setup and EPICS software (running database and OPI clients) will be used in SNS Drift Tube Linac (DTL) system commissioning

Gas generation from biomass for decentralized power supply systems; Gaserzeugung fuer dezentrale Energiesysteme auf der Basis von Biomasse

Energy Technology Data Exchange (ETDEWEB)

Kubiak, H; Papamichalis, A; Heek, K.H. van [DMT-Inst. fuer Kokserzeugung und Brennstofftechnik, Essen (Germany)

1997-12-31

By a reaction with steam, bioresidues and plants can be converted into a gas consisting mainly of hydrogen, carbon monoxide and methane which can be used for electric power generation in gas engines, gas turbins and fuel cells. The conversion processes, especially the fuel cell process, are environment-friendly and efficient. For decentralized applications (i.e. for biomass volumes of 0.5 to 1 t/h), an allothermal process is recommended which is described in detail. (orig) [Deutsch] Durch Reaktion mit Wasserdampf lassen sich Bioreststoffe und Energiepflanzen zu einem Gas umsetzen, das im wesentlichen aus Wasserstoff, Kohlenmonoxid und Methan besteht und z.B. ueber Gasmotoren, Gasturbinen, vorzugsweise aber Brennstoffzellen zu Strom umgewandelt werden kann. Die Umwandlungsverfahren, insbesondere unter Benutzung von Brennstoffzellen, sind umweltfreundlich und haben einen hohen Wirkungsgrad. Als Vergasungsverfahren eignet sich fuer die dezentrale Anwendung. - d.h. fuer eine Biomassemenge von 0,5 bis 1 t/h - insbesondere das hier beschriebene allotherme Verfahren. (orig)

Gas generation from biomass for decentralized power supply systems; Gaserzeugung fuer dezentrale Energiesysteme auf der Basis von Biomasse

Energy Technology Data Exchange (ETDEWEB)

Kubiak, H.; Papamichalis, A.; Heek, K.H. van [DMT-Inst. fuer Kokserzeugung und Brennstofftechnik, Essen (Germany)

1996-12-31

By a reaction with steam, bioresidues and plants can be converted into a gas consisting mainly of hydrogen, carbon monoxide and methane which can be used for electric power generation in gas engines, gas turbins and fuel cells. The conversion processes, especially the fuel cell process, are environment-friendly and efficient. For decentralized applications (i.e. for biomass volumes of 0.5 to 1 t/h), an allothermal process is recommended which is described in detail. (orig) [Deutsch] Durch Reaktion mit Wasserdampf lassen sich Bioreststoffe und Energiepflanzen zu einem Gas umsetzen, das im wesentlichen aus Wasserstoff, Kohlenmonoxid und Methan besteht und z.B. ueber Gasmotoren, Gasturbinen, vorzugsweise aber Brennstoffzellen zu Strom umgewandelt werden kann. Die Umwandlungsverfahren, insbesondere unter Benutzung von Brennstoffzellen, sind umweltfreundlich und haben einen hohen Wirkungsgrad. Als Vergasungsverfahren eignet sich fuer die dezentrale Anwendung. - d.h. fuer eine Biomassemenge von 0,5 bis 1 t/h - insbesondere das hier beschriebene allotherme Verfahren. (orig)

Statistical-dynamic climate forecast for Europe and Germany. Final report; Statistisch-dynamische Klimavorhersage fuer Europa und Deutschland. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Denhard, M.; Schoenwiese, C.D.

2001-07-01

Principal Correlation Pattern Analysis (PCPA) maps the local circulation, temperature and precipitation anomalies in the northern hemisphere in monthly resolution and permits an interpretation of their causes. Calculations are made for the El Nino phenomenon, NAO, and the quasi-11-year cycle of solar radiation variation. Especially the El Nino calculations show the efficiency of PCPA. [German] Mit Hilfe der Principal Correlation Pattern Analysis (PCPA) koennen die von verschiedenen Klimaantrieben erzeugten lokalen Zirkulations-, Temperatur- und Niederschlagsanomalien auf der Nordhemisphaere in monatlicher Aufloesung dargestellt und ursaechlich interpretiert werden. Diese Rechnungen wurden fuer das El Nino Phaenomen, die NAO und den quasi 11-jaehrigen Zyklus der solaren Strahlungsschwankungen durchgefuehrt. Insbesondere die Untersuchungen zu Wirkungen von El Nino auf Europa zeigen, dass die PCPA die Kopplungen eines Prozesses mit dem Klimasystem sehr genau beschreibt und somit die Voraussetzungen schafft, die Wirkungen dieses Klimaantriebs zu modellieren und ihn zur Vorhersage zu nutzen. Erste einfache Vorhersageexperimente fuer das europaeische Klima bestaetigen diese Aussage. (orig.)

Kernforschungszentrum Karlsruhe. Institut fuer Datenverarbeitung in der Technik: Progress report on research and development works in 1984

International Nuclear Information System (INIS)

1985-02-01

The Institut fuer Datenverarbeitung in der Technik (Institute for Data Processing in Engineering) works in the field of applied computer and systems analysis. The present report describes the activities of this Institute within the following KfK-projects: Reprocessing, Fusion Technology, Nuclear Material Safeguards, Nuclear Safety, and the Fast Breeder Project. (WB) [de

Schneller befördert werden

DEFF Research Database (Denmark)

Claussen, Jörg; Grohsjean, Thorsten; Luger, Johannes

2015-01-01

Karriere: Manager, die in ihrem Unternehmen aufsteigen wollen, stehen häufig vor einem Dilemma: Einerseits sollen sie Teamspieler sein, andererseits aus der Masse hervorstechen. Eine Studie zeigt, wie sich dieser Widerspruch auflösen lässt....

Restructuring of the electricity market. New general framework and management strategies for municipalities. Documentation of contributions to the IKU seminar; Strommarkt im Umbruch. Neue Rahmenbedingungen und Strategien fuer Kommunen. Veranstaltungsunterlagen

Energy Technology Data Exchange (ETDEWEB)

Schaefer, C. (comp.)

2000-07-01

The titles of the seven papers presented at the IKU seminar are as follows: 1. The emerging competitive electricity markets - Perspectives for municipalities. - 2. New supply offers and terms and conditions for power procurement of municipalities. - 3. Power procurement and awarding of contracts - legal framework and recommendations for municipalities in designing the tendering procedure in the competitive market environment. - 4. Experience of a municipality in the process of establishing a local pool of buyers. - 5. Experience obtained in defining new tender conditions and specifications for power supply to a municipal undertaking. - 6. Experience of a municipality obtained in negotiations with electricity supply undertakings. - 7. Invitations to tender for energy supply to municipalities - experience of the hessenENERGIE GmbH. (orig./CB) [German] Die Titel der in diesem Dokument abgedruckten sieben Beitraege zum IKU Seminar lauten: 1. Wettbewerb auf den Strommaerkten - Perspektiven fuer Kommunen. - 2. Neue Angebote und neue Konditionen fuer den Strombezug von Kommunen. - 3. Strombezug und Vergaberecht - Rechtlicher Rahmen und Empfehlungen zur Gestaltung der Vergabe bei oeffentlichen Auftraggebern. - 4. Erfahrungen mit der Bildung eines kommunalen Nachfragepools. - 5. Erfahrungen mit der Ausschreibung von Stromlieferungen fuer einen oeffentlichen Auftraggeber. - 6. Erfahrungen einer Kommune aus Verhandlungen ueber den Strombezug mit Versorgungsunternehmen. - 7. Ausschreibung von Energielieferungen fuer Kommunen - Erfahrungen und Angebote der hessenENERGIE GmbH. (orig./CB)

Reports on the research projects in the field of reactor safety sponsored by the Federal Ministry of Science and Technology

International Nuclear Information System (INIS)

1975-12-01

Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the safety program 'Reactor Safety' are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT - Secretary of State for Research and Technology). Objective of this program is to continue improving the safety of LWR, in order to minimize the risk for the environment. With grant assistance from the Bundesminister des Innern (BMI - Secretary of State for Home Affairs) research contracts in the field of reactor safety are being performed. Results of these projects should contribute to resolve questions arising nuclear licensing procedures. The Forschungsbetreuung (FB - research supervision department) at the Institute for Reactor Safety (IRS), as consultants to BMFT and BMI, provides information about the progress of investigations. Individual reports will be prepared and put into standard forms by the research contractors. Each report gives information on: 1) the work accomplished, 2) the results obtained, 3) the work planned to be continued. Initial reports of research projects describe in addition the purpose of the work. A BMFT-research program on the safety of Fast Breeders (Schneller Brutreaktor - SBR) is presently under discussion. In order to define several problems, investigations included in the present compilation (RS 139, 140, 143, 162) will be previously performed. (orig.) [de

Reports covering research projects in the field of reactor safety supported by the German Federal Ministry for Research and Technology

International Nuclear Information System (INIS)

1976-03-01

Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the safety program 'Reactor Safety' are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT - Secretary of State for Research and Technology). Objective of this program is to continue improving the safety of LWR, in order to minimize the risk for the environment. With grant assistance from the Bundesminister des Innern. (BMI - Secretary of State for Home Affairs) research cont racts in the field of reactor safety are being performed. Results of these projects should contribute to resolve questions arising nuclear licensing procedures. The Forschungsbetreuung (FB - research supervision department) at the Institute for Reactor Safety (IRS), as consultants to BMFT and BMI, provides information about the progress of investigations. Individual reports will be prepared and put into standard forms by the research contractors. Each report gives information on: 1) the work accomplished, 2) the results obtained, 3) the work planned to be continued. Initial reports of research projects describe in addition the purpose of the work. A BMFT-research program on the safety of Fast Breeders (Schneller Brutreaktor - SBR) is presently under discussion. In order to define several problems, investigations included in the present compilation (RS 139, 140, 143, 162) will be previously performed. (orig.) [de

Reports on the research projects in the field of reactor safety sponsored by the Federal Ministry of Science and Technology

International Nuclear Information System (INIS)

1976-12-01

Investigations on the safety of light water reactors (LWR) being performed in the framework of the safety program 'Reactor Safety' are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT - Secretary of State for Research and Technology). Objective of this program is to continue improving the safety of LWR, in order to minimize the risk for the environment. With grant assistance from the Bundesminister des Innern (BMI - Secretary of State for Home Affairs) research contrcts in the field of reactor safety are being performed. Results of these projects should contribute to resolve questions arising nuclear licensing procedures. The Forschungsbetreuung (FB - research supervision department) at the Institute for Reactor Safety (IRS), as consultants to BMFT and BMI, provides information about the progress of investigations. Individual reports will be prepared and put into standard forms by the research contractors. Each report gives information on: 1) the work accomplished, 2) the results obtained, 3) the work planned to be continued. Initial reports of research projects describe in addition the purpose of the work. A BMFT-research program on the safety of Fast Breeders (Schneller Brutreaktor - SRB) is presently under discussion. In order to define several problems, investigations included in the present compilation (RS 139, 140, 143, 162) will be previously performed. (orig.) [de

The data acquisition system PHON for the detectors of the PHOENICS experiment; Das Datenerfassungssystem PHON fuer die Detektoren des PHOENICS-Experiments

Energy Technology Data Exchange (ETDEWEB)

Schneider, W.

1991-07-01

The PHON data acquisition system for the PHOENICS experiment at the stretcher ring ELSA in Bonn and its development is described. PHON is based on a fast parallel CAMAC readout with VME front-end processors and a VAX/VMS computer, allowing c omfortable control and programming. The current configuration of the PHON system at the PHOENICS detector uses two CAMAC branches that are read out in parallel. The data is transferred to the VAX by either the ethernet (max. rate 100 kByte/sec) or a bus coupler device (max. rate 650 kByte/sec). On the VAX the data can be stored on a harddisk and analyzed by several PHON online tasks. The harddisk limits the maximum data rate to a value of approximately 180 kByte/sec. The maximum trigger rate achieved is about 150 Hz. Two kinds of user shells are realized to control the PHON system. A command shell follows the standard of the control language of the VMS operating system and a graphic user interface uses the `X Window System`. The modular structure of the PHON system and the unique kind of creation of all PHON programs makes a further development of the system easy to do. (orig.). [Deutsch] Die vorliegende Arbeit beschreibt die Entwicklung und Funktion des Datenerfassungssystems PHON. Das System basiert auf einer parallelen Auslese von CAMAC-Branchen mit VME-Front-End-Prozessoren und einem VAX/VMS-Hauptrechner, der eine komfortable Programmsteuerung und -Entwicklung erlaubt. Momentan werden an dem PHOENICS-Detektor zwei CAMAC-Branche von jeweils einem VME-Front-End-Prozessor ausgelesen. Die Daten koennen wahlweise ueber Ethernet (max. Uebertragungsrate ca. 100 kByte/sec), oder ueber einen Buskoppler (max. 650 kByte/sec) auf den Hauptrechner (VAXStation 3200) transferiert werden. Dort koennen sie auf einer Festplatte abgespeichert und von verschiedenen Analyseprozessen verarbeitet werden. In dieser Konfiguration werden Datenraten von 180 kByte/sec erzielt. Die maximale Triggerrate betraegt etwa 150 Hz. Die Steuerung des PHON

Safety aspects and safety measures for the refrigerants N{sub 3} and F-CFC and CFC; Sicherheitsaspekte/Sicherheitsmassnahmen fuer Kaeltemittel NH{sub 3} und FCKW/FKW

Energy Technology Data Exchange (ETDEWEB)

Stuerchler, P. [GfG AG, Binz (Switzerland)

2001-09-01

Experts agree that ammonia is the best and most economical refrigerant for a number of applications, e.g. in skating rinks, the food industry, chemical plants, etc. It has good thermodynamic properties and a low ozone-depleting potential, but it is also an aggressive and toxic substance. The potential hazard to humans and plants can be reduced, however, by early detection of leaks. There are different specifications in different European countries. In Switzerland, the EKAS regulations apply. [German] In der Kaelteindustrie herrscht eine Uebereinstimmung, dass fuer eine Vielzahl von Anlagen, z.B. Eissportanlagen, Lebensmittelbetriebe, Chemieanlagen u.v.m., Ammoniak als das beste und wirtschaftlichste Kaeltemittel betrachtet wird. Die guten thermodynamischen Eigenschaften und das geringe Ozonabbaupotential haben Ammoniak zum wichtigsten Kaeltemittel in mittleren und Grossanlagen gemacht. Die aggressive und giftige Chemikalie Ammoniak birgt jedoch ein nicht zu unterschaetzendes Gefahrenpotential fuer Mensch und Anlage. Diese Gefahr kann weitestgehend eingedaemmt werden. Eine fruehe und zuverlaessige Erkennung von Leckagen minimiert deren Auswirkungen und Schaeden. Die Vorschriften hierzu sind laenderspezifisch in den Verordnungen und Richtlinien festgelegt. Fuer die Schweiz gelten die Richtlinien der EKAS. (orig.)

Design, construction and testing of holographic PV concentrator modules and construction of a pilot plant for serial production of the holographic optical concentrator system on flexible foils. Follow-up project: Completion of the production process for mass production of large format holographic optical elements on flexible foils for solar technology. Final report; Auslegung, Konstruktion und Test von holographischen PV-Konzentratormodulen und Aufbau einer Pilotanlage zur Serienfertigung der holographischen Konzentratoroptik auf flexiblen Folien. Anschlussvorhaben: Vervollstaendigung der Produktionsverfahren fuer die Serienfertigung von grossformatigen holographischen optischen Elementen auf flexiblen Folien fuer die Solartechnik. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Stojanoff, C.G.; Froehlich, K.; Froening, P.; Schulat, J.; Schuette, H.; Wagemann, E.U.

1997-06-30

The aim of the research project is the development of a technique for value for money mass-production of large area holographic focussers made of dichromate gelatine for photo-electrics. The holograms act simultaneously as spectrally dispersing and focussing optical elements, which focus the sunlight in discrete bands on the spectrally matched solar cells. The three marked characteristics of the holographic focussers are the diffraction efficiency, the spectral bandwidth and the central working wavelength. The optimum values of these parameters depend on the variation of the layer thickness and the index of refraction over the aperture of the hologram, and on the ability of the DCG layer to provide great modulation of the index of refraction. Mass-production of large format holographic lenses (transmission holograms) and mirrors (reflection holograms) demands precise coating of the supporting substrate (glass or PET foil) with dichromate gelatine. Mass-production of the holographic lenses requires a matrix hologram with 50% diffraction efficiency and is done with two copier plants developed in the project. (orig./AKF) [Deutsch] Ziel des Forschungsvorhabens ist die Entwicklung einer Technologie fuer die preiswerte serielle Herstellung von grossflaechigen holographischen Konzentratoren in Dichromatgelatine fuer die Photovoltaik. Die Hologramme wirken gleichzeitig als spektral dispergierende und fokussierende optische Elemente, die das Sonnenlicht in diskreten Baendern auf spektral angepasste Solarzellen konzentrieren. Die drei kennzeichnenden Charakteristiken der holographischen Konzentratoren sind die Beugungseffizienz, die spektrale Bandbreite und die zentrale Arbeitswellenlaenge. Die optimalen Werte dieser Parameter sind durch die Variation der Schichtdicke und des Brechnungsindexes ueber die Apertur des Hologramms, sowie durch die Faehigkeit der DCG-Schicht grosse Brechungsindexmodulation zu ermoeglichen, eindeutig bedingt. Die serielle Fertigung der

Assessment of the potential of the Mainfranken region, northern Bavaria, for underground storage of geothermal energy; Erkundung des regionalen Potentials fuer die Untergrundspeicherung thermischer Energie in Mainfranken (UTEM)

Energy Technology Data Exchange (ETDEWEB)

Barthel, R; Heinrichs, G; Udluft, P [Lehr- und Forschungsbereich Hydrogeologie und Umwelt, Inst. fuer Geologie, Univ. Wuerzburg (Germany); Ebert, H P; Fricke, J [Abt. Waermedaemmung/Waermetransport, Bayerisches Zentrum fuer Angewandte Energieforschung e.V., Wuerzburg (Germany)

1997-12-01

The following paper presents a research project that is planned as a cooperation of the Geological Institute, University of Wuerzburg and the Bavarian Center of Applied Energy Research. In this project the potentials for underground thermal energy storage will be investigated in the region of Mainfranken, Northern Bavaria (Main = the river `Main`, Franken = Franconia). All aspects of underground storage will be studied with respect to the specific geographical and geological situation of the area. The study will provide a detailed map of possible storage sites, from which several case studies and at least one demonstration projects will result. (orig.) [Deutsch] Im vorliegenden Beitrag wird ein Forschungsprojekt vorgestellt, das gemeinsam vom Institut fuer Geologie der Universitaet Wuerzburg und dem Zentrum fuer Angewandte Energieforschung in Bayern geplant wird. Ziel des Projekts ist die Erkundung des Potentials fuer die Untergrundspeicherung thermischer Energie in Mainfranken (Nordbayern). Alle Aspekte der Untergrundspeicherung werden regionalspezifisch betrachtet. Neben der Erstellung differenzierter Karten geeigneter Standorte sind Fallstudien und Demonstrationsprojekte in Planung. (orig.)

3. Workshop on measuring instruments for steady and transient multiphase flow; 3. Workshop: Messtechnik fuer stationaere und transiente Mehrphasenstroemungen

Energy Technology Data Exchange (ETDEWEB)

Prasser, H.M. [ed.

1999-12-01

The emphasis of the conference was on methods of measurement that show spatial distributions of phase fractions and velocity, particle sizes and bubbles of the disperse phase. Among the methods described were 3D X-ray tomography, grid sensor measurement of velocity profiles, and simultaneous measurement of bubble sizes and gas and liquid flow rates using an optical particle tracking method. Also presented were interesting developments in the field of local probes, e.g. an electrodiffusion probe. Another new development was the attempt to use optical tomography for investigations of two-phase flows. [German] Am 14. Oktober 1999 wurde in Rossendorf die dritte Veranstaltung in einer Serie von Workshops ueber Messtechnik fuer stationaere und transiente Mehrphasenstroemungen durchgefuehrt. Dieses Jahr koennen wir auf 11 interessante Vortraege zurueckblicken. Besonders hervorzuheben sind die beiden Hauptvortraege, die von Herrn Professor Hetsroni aus Haifa und Herrn Dr. Sengpiel aus Karlsruhe gehalten wurden. Ihnen und allen anderen Vortragenden moechten wir herzlich fuer ihren Beitrag zum Gelingen des Workshops danken. Erneut lag ein wichtiger Schwerpunkt auf Messverfahren, die raeumliche Verteilungen von Phasenanteilen und Geschwindigkeiten sowie die Groesse von Partikeln bzw. Blasen der dispersen Phase zugaenglich machen. So wurde ueber einen dreidimensional arbeitenden Roentgentomographen, ein Verfahren zur Messung von Geschwindigkeitsprofilen mit Gittersensoren und eine Methode zur simultanen Messung von Blasengroessen sowie Feldern von Gas- und Fluessigkeitsgeschwindigkeit mit einer optischen Partikelverfolgungstechnik vorgetragen. Daneben wurden interessante Entwicklungen auf dem Gebiet der lokalen Sonden vorgestellt, wie z.B. eine Elektrodiffusionssonde. Neue messtechnische Ansaetze waren ebenfalls vertreten; hervorzuheben ist der Versuch, die Methode der optischen Tomographie fuer die Untersuchung von Zweiphasenstroemungen nutzbar zu machen. (orig.)

Skywards - climate design for the Moscow Federation Tower; Dem Himmel entgegen - Klimadesign fuer den Federation Tower Moskau

Energy Technology Data Exchange (ETDEWEB)

Reiser, Claudius [Ebert-Ingenieure GmbH and Co. KG, Competence Center Nachhaltiges Bauen, Nuernberg (Germany)

2008-06-15

Advanced simulation tools were used in developing the climate design for the roof covering the taller of the two blocks at Moscow's Federation Tower. The all-glass roof space at a height of 365 m is designed to accommodate the finest and most exclusive hotel areas. Several restaurants, bars and lounges and a Sky Dance Club will offer entertainment and fabulous views across the whole city. Simulations were used to develop and verify a design that ensures thermal comfort taking into account architectural, climate and utilisation requirements. The structure and the building services were simulated based on a 3D model, and simulations were carried out for summer and winter scenarios. This paper describes the design process including load calculations and the development and assessment of the climate design by means of simulation. (Abstract Copyright [2008], Wiley Periodicals, Inc.) [German] In der Entwicklung des Klimakonzeptes der Turmkappe Ost des Federation Towers in Moskau wurden modernste Simulationswerkzeuge eingesetzt. Die vollstaendig glaeserne Turmkappe in 365 m Hoehe soll Raum fuer einen der schoensten und exklusivsten Bereiche des Hotels geben. Diverse Restaurants, Bars und Lounges sowie ein Sky Dance Club sollen einmal zum Verweilen und zur naechtlichen Vergnuegung einladen und dabei stets einen traumhaften Blick ueber die gesamte Stadt ermoeglichen. Mit Hilfe der Simulation wurde fuer die Turmkappe ein Klimakonzept entwickelt und ueberprueft, das die thermische Behaglichkeit unter Beruecksichtigung von Architektur, Klima und Nutzung gewaehrleistet. Dazu wurde die Architektur inklusive der Klimatechnik in einem 3D-Modell abgebildet und fuer den Sommer- und Winterfall berechnet. Der vorliegende Beitrag vollzieht den Planungsablauf von der Lastberechnung bis hin zur Erstellung und Bewertung des Klimakonzeptes in der Simulation. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

Compression and archiving of digital images

International Nuclear Information System (INIS)

Huang, H.K.

1988-01-01

This paper describes the application of a full-frame bit-allocation image compression technique to a hierarchical digital image archiving system consisting of magnetic disks, optical disks and an optical disk library. The digital archiving system without the compression has been in clinical operation in the Pediatric Radiology for more than half a year. The database in the system consists of all pediatric inpatients including all images from computed radiography, digitized x-ray films, CT, MR, and US. The rate of image accumulation is approximately 1,900 megabytes per week. The hardware design of the compression module is based on a Motorola 68020 microprocessor, A VME bus, a 16 megabyte image buffer memory board, and three Motorola digital signal processing 56001 chips on a VME board for performing the two-dimensional cosine transform and the quantization. The clinical evaluation of the compression module with the image archiving system is expected to be in February 1988

A combined PLC and CPU approach to multiprocessor control

International Nuclear Information System (INIS)

Harris, J.J.; Broesch, J.D.; Coon, R.M.

1995-10-01

A sophisticated multiprocessor control system has been developed for use in the E-Power Supply System Integrated Control (EPSSIC) on the DIII-D tokamak. EPSSIC provides control and interlocks for the ohmic heating coil power supply and its associated systems. Of particular interest is the architecture of this system: both a Programmable Logic Controller (PLC) and a Central Processor Unit (CPU) have been combined on a standard VME bus. The PLC and CPU input and output signals are routed through signal conditioning modules, which provide the necessary voltage and ground isolation. Additionally these modules adapt the signal levels to that of the VME I/O boards. One set of I/O signals is shared between the two processors. The resulting multiprocessor system provides a number of advantages: redundant operation for mission critical situations, flexible communications using conventional TCP/IP protocols, the simplicity of ladder logic programming for the majority of the control code, and an easily maintained and expandable non-proprietary system

Processes and materials for photovoltaic applications. Workshop; Verfahren und Materialien fuer die Photovoltaik. Workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Solar energy will surely continue to be the most important renewable energy source. Since 1985, solar cell production has doubled every five years while the per unit price decreased continuously. This trend is expected to continue. Germany made important contributions both in the construction of new solar cell production plants and in the development of new PV materials and material combinations, as well as in technology and PV plant construction. The states of Thuringia and Saxony were significant contributors. In Thuringia, two solar cell production plants were constructed, while Saxon vacuum coating technology was used in nearly all new German production plants. This workshop presented the activities in Thuringia in Saxony. Contacts were to be established between partners from industry and research, joint projects were to be initiated, and society and politicians were to be informed on the success and new chances achieved. The workshop was held on the occasion of the termination of construction and the starting of experimental production of the ANTEC Solar GmbH factory at Rudisleben. [German] Im Mix der erneuerbaren Energien spielt die Solarenergie kuenftig wohl die wichtigste Rolle. Seit 1985 verdoppelt sich die Solarzellenproduktion in jeweils fuenf Jahren, gleichzeitig sank der Preis pro Leistungseinheit kontinuierlich. Dieser Trend wird weiter anhalten. Deutschland leistete in den letzten Jahren wichtige Beitraege zu dieser Entwicklung, sowohl beim Aufbau neuer Fertigungskapazitaeten fuer Solarzellen, als auch bei der Entwicklung neuer Photovoltaik-Materialien bzw. -Materialkombinationen und auf den Gebieten der Technologie und des Anlagenbaus. Der Anteil Thueringens und Sachsens an dieser positiven Entwicklung ist groesser als generell vermutet. In Thueringen entstanden zwei Unternehmen fuer die Solarzellenproduktion, der saechsische Vakuumbeschichtungs-Anlagenbau war am Aufbau fast aller neuen deutschen Fertigungsstaetten beteiligt. Auf dem Workshop werden

Telematics for hazardous goods transportation; Anwendungen fuer den Transport von kritischen Guetern

Energy Technology Data Exchange (ETDEWEB)

Stingl, D [Danzas Logistics GmbH, Hamburg (Germany)

1999-07-01

In the course of the integration of the customer Langnese Iglo in autumn 1997 and in view of the already existing general conditions for the implementation of the equlations of the directive on food hygiene (HACCP-concept) as well as the permanently in reasing demand for quality of logistics DANZAS Logistics GmbH, cooperating closely with in deep-frozen goods customer Langnese-Iglo decided to develop a new system of quality assurance for the transportation of deep-frozen goods and apply this system to all its activities. First ideas about standard demands, technical solutions and multi-functional design showed that the project had to be handled in such a flexible way that temperature controlling (for the transportation of deep-frozen goods, temperature-controlled DANZAS-warehouses and all future temperature-controlled transportation) and the monitoring of security-relevant transportation can be integrated in one and the same project. (orig.) [German] Im Zuge der Integration des Kunden Langnese Iglo im Herbst 1997 und unter Beruecksichtigung der bereits vorliegenden Rahmenbedingungen zur Umsetzung der Bestimmungen der Lebensmittelhygieneverordnung (HACCP-Konzept) sowie des staendig wachsenden Qualitaetsanspruches an logistische Dienstleistungen, hat sich die DANZAS Logistics GmbH in enger Zusammenarbeit mit dem TK-Kunden Langnese Iglo entschlossen, ein innovatives System zur Qualitaetssicherung im Tiefkuehltransport zu erarbeiten und flaechendeckend einzusetzen. Die ersten Gedanken bezueglich Standardanforderungen, technischer Loesungsansaetze und multifunktionaler Ausrichtung zeigten, dass dieses Projekt so variabel zu gestalten ist, dass sowohl Temperaturcontrolling (fuer TK-Transporte, fuer die temperaturgefuehrten DANZAS-Laeger und zukuenftig alle temperaturgefuehrten Transporte) als auch die Ueberwachung sicherheitsrelevanter Transporte zu integrieren sind. (orig.)

The Institute for Mining Science I at the Rhineland-Westphalia Technological University in Aachen; Das Institut fuer Bergbaukunde I der RWTH Aachen

Energy Technology Data Exchange (ETDEWEB)

Martens, P.N.; Moellerherm, S.; Rattmann, L. [Technische Hochschule Aachen (Germany). Lehrstuhl und Inst. fuer Bergbaukunde 1

2001-02-08

The Institute for Mining Science I has been associated with the extraction of raw materials for over one hundred years. The main areas of work of the Institute have always been adapted to current requirements according to general developments in the raw materials sector and in this environment. The work in research and teaching has recently been extended by new fields. Today mining and sustained handling of resources, geotechnics, raw material management and underground disposal of waste are examples of parts of a comprehensive range of competences. The close interlinking of theory and practice allows students to broaden their knowledge in interdisciplinary and international projects. The graduates are thus prepared in an excellent manner for their future tasks. (orig.) [German] Seit ueber hundert Jahren steht das Institut fuer Bergbaukunde I fuer Gewinnung von Rohstoffen. Schwerpunkte der Arbeiten des Instituts wurden, allgemeinen Entwicklungen in der Rohstoffbranche und in deren Umfeld entsprechend, stets den aktuellen Erfordernissen angepasst. Die Arbeit in Forschung und Lehre ist in den letzten Jahren um neue Bereiche erweitert worden. Heute sind Bergbau und nachhaltiger Umfang mit Ressourcen, Geotechnik, Rohstoffwirtschaft sowie untertaegige Abfallentsorgung als Beispiele fuer Teile eines umfassenden Kompetenzspektrums zu nennen. Die enge Verzahnung von Theorie und Praxis ermoeglicht Studierenden, ihre Kenntnisse fruehzeitig in interdisziplinaeren und internationalen Projekten zu vertiefen. Damit werden die Absolventen auf ihre zukuenftigen Aufgaben in hervorragender Weise vorbereitet. (orig.)

Photovoltaics for appliances and small systems. Enhancement of the PVS for Windows simulation program for development and simulation of PV appliances and small systems. Final report; Photovoltaik fuer Geraete und Kleinsysteme. Erweiterung des Simulationsprogramms PVS fuer Windows zur Entwicklung und Simulation von PV-versorgten Geraeten und Kleinsystemen. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Vogt, R.; Imann, C.; Jung, V.

2002-06-28

The PVS simulation program for Windows was to be extended to the development and simulation of PV-supported equipment and small systems. The following new functions were to be integrated: a) Simulation and dimensioning of indoor power supply of systems with different light sources and independent outdoor systems. b)Integration of small wind generators in the simulation and dimensioning of isolated autonomous systems, including wind data and a component database for small wind turbines; c) Differentiation of the PVS battery model for different battery types (lead, Ni/Cd, Li etc.), optimized operating strategies and flexible dimensioning including an additional component database for battery types; d) Extensive cost analysis for PV-supported appliances and small systems, from investments to consumption, operation and maintenance. This will facilitate investment decisions and help systems of this type along in the market. All program components were designed for high flexibility. Users should be able to vary as many parameters as possible, and to generate and modify their own records. The current project focused on the user interface, i.e. input, data processing, and output. Parallel to this, the Fraunhofer ISE Institute worked on modifications of the computer hardware. [German] Das Projekt zielte auf eine Erweiterung des Simulationsprogramms PVS fuer Windows zur Entwicklung und Simulation von PV-versorgten Geraeten und Kleinsystemen hin. Das Entwicklungsprodukt sollte zusaetzlich zu den bisherigen Funktionen insbesondere Folgendes leisten: (a) Simulation und Dimensionierung der Energieversorgung von Geraeten im Indoor-Bereich, wobei unterschiedliche Lichtquellen verarbeitet werden muessen, sowie von sonstigen netzfreien (Outdoor-) Kleinsystemen. (b) Einbindung kleiner Windgeneratoren in die Simulation und Dimensionierung von netzfernen Systemen (Insel-Anlagen), einschliesslich Bereitstellung der Wind-Daten und einer zusaetzlichen Komponenten-Datenbank fuer kleine

Simple Stirling engine as cogeneration unit in residential areas; Einfacher Stirling-Motor fuer die Waerme-Kraft-Kopplung (WKK) in kleinen Wohngebaeuden

Energy Technology Data Exchange (ETDEWEB)

Budliger, J.P.

2000-07-01

Free-piston Stirling engines have been recognized for long as an ideally suited unit for combined heat and power (CHP) production in homes. The considerably improved use of fossil fuel as compared to their separate production, the clean, external combustion process and low noise are major assets, favouring the use of this technology in residential areas. However, up to present, the complexity and correspondingly high cost of these units hampered their practical application. A new, simple concept has recently been devised, which can easily be controlled and operated according to demand. Cost may be reduced substantially as compared to presently known concepts, giving promise for their widespread use in residential homes, as well as in a variety of other applications. (orig.) [German] Freikolben-Stirling-Motoren sind ideale Aggregate fuer die Waerme-Kraft-Kopplung (WKK oder KWK) in kleineren Wohnhaeusern. Der Brennstoff kann wesentlich besser genutzt werden als bei getrennter Bereitung der benoetigten Heizwaerme und der elektrischen Energie. Die saubere, kontinuierliche aeussere Verbrennung und der geringe abgegebene Laerm stellen wichtige Bedingungen fuer einen erfolgreichen Einsatz solcher Systeme im Wohnbereich dar. Bisher verhinderten aber die Komplexitaet der verfuegbaren Systeme den praktischen Einsatz dieser Einheiten. Im Folgenden wird ein neues, einfaches Konzept vorgestellt, welches zuverlaessig funktioniert und auch unter Teillast, dem benoetigten Waermebedarf genau angepasst, betrieben werden kann. Die Herstellungskosten sind wesentlich geringer als bei den bisher bekannten Systemen, was ideale Voraussetzungen fuer deren verbreitete Anwendung im Haushalt, wie in vielfaeltigen anderen Einsatzgebieten darstellt. (orig.)

Fracture-mechanical analysis of metal/ceramic composites for applications in high-temperature fuel cells (SOFC); Bruchmechanische Untersuchung von Metall/Keramik-Verbunsystemen fuer die Anwendung in der Hochtemperaturbrennstoffzelle (SOFC)

Energy Technology Data Exchange (ETDEWEB)

Kuhn, Bernd Josef

2008-08-25

The author investigated the deformation and damage behaviour of soldered ceramic/metal joints in SOFC stacks, using thermochemical methods. Methods for analyzing sandwich systems and for mechanical characterization of joints were adapted and modified in order to provide fundamental understanding of the mechanical properties of soldered joints. [German] In dieser Arbeit wurde das Verformungs- und Schaedigungsverhalten von Keramik/ Metall-Loetverbindungen fuer SOFC-Stacks thermomechanisch untersucht. Verfahren zur Analyse von Schichtsystemen und fuer die mechanische Charakterisierung von Fuegeverbindungen wurden adaptiert und weiterentwickelt, um zu einem grundlegenden Verstaendnis der mechanischen Eigenschaften von Loetverbindungen zu gelangen.

Pumps for cryogenic liquids with superconducting magnetic bearings. Final report; Pumpen fuer kryogene Fluessigkeiten mit supraleitenden Magnetlagern. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Gerlach, G.; Fuchs, G.; Sorber, J.; Brosche, H.; Richter, M.; Frenzel, C.

2000-07-01

A liquid nitrogen pump with contactless superconducting magnetic bearings was to be developed on the basis of an available motor with superconducting bearings. Contactless superconducting magnetic bearings require practically no servicing. A high demand for pumps for cryogenic liquids is expected with the impending use of hydrogen as an energy source. The pumping of liquid nitrogen was demonstrated successfully with the new test aggregate. The maximum pumped volume was 17 l/min at a lift of 0.5 m and 6 l/min at a lift of 1 m. In all, 15 hours of operation were registered in the superconducting state of the bearing, which included 2 hours of uninterrupted pump operation. The higher speed range for which magnetic bearings are optimally suited was not reached. Operation at higher frequencies was impossible either because of stronger resonance amplituees or because the power system was too weak. [German] Ziel des Vorhabens war die Entwicklung einer Pumpe fuer fluessigen Stickstoff mit beruehrungslosen supraleitenden Magnetlagern auf der Basis eines vorhandenen supraleitend gelagerten Motors. Die beruehrungslose supraleitende Magnetlager sind praktisch wartungsfrei. Ein Bedarf an Pumpen fuer kryogene Fluessigkeiten entsteht insbesondere durch den in naher Zukunft zu erwartenden Einsatz von Wasserstoff als Energietraeger. Mit dem entworfenen Aggregat wurde das Pumpen von Fluessigstickstoff erfolgreich demonstriert. Der Foerderstrom betrug bei 0,5m Foerderhoehe maximal 17 l/min; beim 1m Foerderhoehe wurden maximal 6 l/min gemessen. Es wurden insgesamt ca. 15 Betriebsstunden in supraleitenden Zustand des Lagers, darunter 2 Stunden ununterbrochener Pumpbetrieb registriert. Der hoehere Drehzahlbereich, fuer den das Magnetlager eigentlich paedestiniert ist, konnte nicht erreicht werden. Ein Betrieb bei hoeheren (Ist-)Frequenzen war nicht moeglich, entweder durch staerkere Resonanzausschlaege oder durch einen zu schwachen Antrieb. (orig.)

Big like a gym. New business models for public utilities; Gross wie eine Turnhalle. Neue Geschaeftsmodelle fuer Stadtwerke

Energy Technology Data Exchange (ETDEWEB)

Schwarzburger, Heiko

2013-10-01

Electricity storage is no longer a vision, also in the case of greater power ratings too. The breakthrough is done: ready-to-connect systems are available as complete packages or containers. [German] Stromspeicher sind keine Vision mehr. Auch nicht fuer grosse Leistungen. Der Durchbruch ist geschafft: Anschlussfertige Systeme sind als Container oder Gesamtpakete verfuegbar.

Ion-beam enhanced etching for the 3D structuration of lithium niobate; Ionenstrahlverstaerktes Aetzen fuer die 3D-Strukturierung von Lithiumniobat

Energy Technology Data Exchange (ETDEWEB)

Gischkat, Thomas

2010-01-12

The present thesis deals with the usage of the ion-beam enhanced etching (IBEE) for the 3D structuration of lithium niobate (LiNbO{sub 3}).Hereby the approach of the enhancement of the wet-chemical etching rate due to the irradiation with energetic ions is pursued. This method is very success promising for the realization of micro- and nanostructures with perpendicular structural walls as well as small roughnesses. The aim of this thesis consisted therein to form the foundations for the realization of three-dimensional micro- and nanostructures (for instance: Layer systems and photonic crystals) in LiNbO{sub 3} with high optical quality and to demonstrate on selected examples. Conditions for the success of the IBEE structuration technique is first of all the understanding of the defect formation under ion irradiation as well as the radiation-induced structure changes in the crystal and the change of the chemical resistance connected with this. For this the defect formation was studied in dependence on th ion mass, the ion energy, and the irradiation temperature. Thermally induced influences and effects on the radiation damage, as they can occur in intermediate steps in the complex processing, must be known and were studied by means of subsequent temperature treatment. The results from the defect studies were subsequently applied for the fabrication of micro- and nanostructures in LiNbO{sub 3}. Shown is the realization of lateral structure with nearly perpendicular structure walls as well as the realization of thin membranes and slits. The subsequent combination of lateral structuration with the fabrication of thin membranes and slits allowed the three-dimensional structuration of LiNbO{sub 3}. This is exemplarily shown for a microresonator and for a 2D photonic crystal with below lying air slit. [German] Die vorliegende Arbeit beschaeftigt sich mit der Ausnutzung des ionenstrahlverstaerkten Aetzens (IBEE: Ion Beam Enhanced Etching) fuer die 3D-Strukturierung von

Unilateral and bilateral neck SIB for head and neck cancer patients. Intensity-modulated proton therapy, tomotherapy, and RapidArc

Energy Technology Data Exchange (ETDEWEB)

Stromberger, Carmen; Budach, Volker; Ghadjar, Pirus; Wlodarczyk, Waldemar; Marnitz, Simone [Charite - Universitaetsmedizin Berlin, Department of Radiation Oncology and Radiotherapy, Berlin (Germany); Cozzi, Luca; Fogliata, Antonella [Humanitas Cancer Center Milan, Radiotherapy and Radiosurgery Department, Milan (Italy); Jamil, Basil [Klinikum Frankfurt Oder, Praxis fuer Strahlentherapie, Frankfurt Oder (Germany); Raguse, Jan D. [Clinic for Oral and Maxillofacial Surgery, Berlin (Germany); Boettcher, Arne [Charite - Universitaetsmedizin Berlin, Department of Otorhinolaryngology, Berlin (Germany)

2016-04-15

To compare simultaneous integrated boost plans for intensity-modulated proton therapy (IMPT), helical tomotherapy (HT), and RapidArc therapy (RA) for patients with head and neck cancer. A total of 20 patients with squamous cell carcinoma of the head and neck received definitive chemoradiation with bilateral (n = 14) or unilateral (n = 6) neck irradiation and were planned using IMPT, HT, and RA with 54.4, 60.8, and 70.4 GyE/Gy in 32 fractions. Dose distributions, coverage, conformity, homogeneity to planning target volumes (PTV)s and sparing of organs at risk and normal tissue were compared. All unilateral and bilateral plans showed excellent PTV coverage and acceptable dose conformity. For unilateral treatment, IMPT delivered substantially lower mean doses to contralateral salivary glands (< 0.001-1.1 Gy) than both rotational techniques did (parotid gland: 6-10 Gy; submandibular gland: 15-20 Gy). Regarding the sparing of classical organs at risk for bilateral treatment, IMPT and HT were similarly excellent and RA was satisfactory. For unilateral neck irradiation, IMPT may minimize the dry mouth risk in this subgroup but showed no advantage over HT for bilateral neck treatment regarding classical organ-at-risk sparing. All methods satisfied modern standards regarding toxicity and excellent target coverage for unilateral and bilateral treatment of head and neck cancer at the planning level. (orig.) [German] Planvergleich von intensitaetsmodulierter Protonentherapie (IMPT), Tomotherapie (HT) und RapidArc-Therapie (RA) fuer Patienten mit Plattenepithelkarzinomen der Kopf-Hals-Region unter Anwendung des simultan integrierten Boost-Konzepts (SIB). Fuer 20 Patienten mit Plattenepithelkarzinomen der Kopf-Hals-Region und bilateraler (n = 14) oder unilateraler (n = 6) zervikaler primaerer Radiochemotherapie erfolgte eine IMPT-, HT- und RA-Planung mit 54,4, 60,8 und 70,4 GyE/Gy in 32 Fraktionen. Die Dosisverteilung, Abdeckung, Konformitaet und Homogenitaet der PTVs sowie die

Breath-hold technique in conventional APPA or intensity-modulated radiotherapy for Hodgkin's lymphoma. Comparison of ILROG IS-RT and the GHSG IF-RT

Energy Technology Data Exchange (ETDEWEB)

Kriz, Jan; Spickermann, Max; Lehrich, Philipp; Reinartz, Gabriele; Eich, Hans; Haverkamp, Uwe [University of Muenster, Department of Radiation Oncology, Muenster (Germany); Schmidberger, Heinz [University Mainz, Department of Radiation Oncology, Mainz (Germany)

2015-09-15

The present study addresses the role of intensity-modulated radiotherapy (IMRT) in contrast to standard RT (APPA) for patients with Hodgkin's lymphoma (HL) with a focus on deep inspiration breath-hold (DIBH) technique and a comparison between the International Lymphoma Radiation Oncology Group (ILROG) Involved Site Radiotherapy (IS-RT) versus the German Hodgkin Study Group (GHSG) Involved Field Radiotherapy (IF-RT). APPA treatment and 2 IMRT plans were compared for 11 patients with HL. Furthermore, treatment with DIBH versus free breathing (FB) and two different treatment volumes, i.e. IF-RT versus IS-RT, were compared. IMRT was planned as a sliding-window technique with 5 and 7 beam angles. For each patient 12 different treatment plans were calculated (132 plans). Following organs at risk (OAR) were analysed: lung, heart, spinal cord, oesophagus, female breast and skin. Comparisons of the different values with regard to dose-volume histograms (DVH), conformity and homogeneity indices were made. IS-RT reduces treatment volumes. With respect to the planning target volume (PTV), IMRT achieves better conformity but the same homogeneity. Regarding the D{sub mean} for the lung, IMRT shows increased doses, while RT in DIBH reduces doses. The IMRT shows improved values for D{sub max} concerning the spinal cord, whereas the APPA shows an improved D{sub mean} of the lung and the female breast. IS-RT reduces treatment volumes. Intensity-modulated radiotherapy shows advantages in the conformity. Treatment in DIBH also reduces the dose applied to the lungs and the heart. (orig.) [German] Ziel dieser Auswertung ist es, die konventionelle APPA-Feldanordnung mit der Intensitaetsmodulierten Radiotherapie (IMRT) bei Patienten mit Hodgkin-Lymphom (HL) zu vergleichen. Ein besonderer Fokus liegt hierbei auf der Bestrahlung in tiefer Inspiration und Atemanhaltetechnik (DIBH). Des Weiteren wurde die ''Involved-site''-Radiotherapie (IS-RT) der International

Design of electronic modules for the low-level RF systems at CERN. With particular regard to a new trigger unit for the Super Proton Synchrotron.

CERN Document Server

Levens, Thomas Edward; Knox, Andrew

This report presents the work completed while the author was working for the BE-RF-FB group at the European Organization for Nuclear Research during the period of June to December 2010. The placement was completed as part of the University of Glasgow course ‘Industrial Project EE5’ which is requirement during the final year of the Degree of Master of Engineering. The report will pay particular attention to the hardware and firmware design of the ‘Dual Trigger Unit’, a new electronic module for the low-level RF system of the Super Proton Synchrotron accelerator which generates delayed timing pulses in order to trigger other hardware. In addition to this, the report will cover other projects completed during the period, including work on a prototype of the ‘VME Peak Detector’ card for the Large Hadron Collider beam observation system.

Modules for cloudy days; Module fuer truebe Tage

Energy Technology Data Exchange (ETDEWEB)

Rentzing, Sascha

2011-04-15

Thin-film systems are commonly assumed to be unproductive because of their low efficiency. Those who use them, however, have found that the opposite may be the case: Owing to its better weak light and temperature characteristics, this technology may be more efficient in central European climates than thick fim systems.

Detailed data set of a large administration building as a validation model for DIN V18599-software; Umfangreicher Validierungsdatensatz eines grossen Verwaltungsgebaeudes fuer Software zur DIN V 18599

Energy Technology Data Exchange (ETDEWEB)

Hoettges, Kirsten; Woessner, Simon; de Boer, Jan; Erhorn, Hans [Fraunhofer-Institut fuer Bauphysik (IBP), Abt. Energiesysteme, Kassel (Germany); Fraunhofer-Institut fuer Bauphysik (IBP), Stuttgart (Germany)

2009-04-15

The calculation method of DIN V 18599 represents a very complex model for the estimation of the energy efficiency of buildings. The method is used for certificates too, thus, the number of users is quite high. This fact and the complexity of the method causes high demands on the related software products. Most of the end user software tools work with the calculation engine ibp18599kernel developed by Fraunhofer-Institut for Building Physics. There is a continuous quality control for both, the kernel and the user interfaces, i.e. the end user software. This paper gives an overview of the process of quality control as well as a documentation of a validation model used within this process, i.e. a complex administration building as a sample. (Abstract Copyright [2009], Wiley Periodicals, Inc.) [German] Mit dem Berechnungsverfahren der DIN V 18599 liegt ein umfassendes Berechnungsmodell fuer die energetische Bewertung von Gebaeuden vor. Der grosse Umfang der Verfahren stellt auch an die softwaretechnischen Umsetzungen fuer die Planungspraxis hohe Anforderungen. Das Fraunhofer-Institut fuer Bauphysik hat hierzu den Rechenkern ibp18599kernel entwickelt, der zwischenzeit-lich von zahlreichen Softwarehaeusern fuer Endanwendungsprogramme zur energetischen Bewertung und Erstellung von Energieausweisen eingesetzt wird. Dieser ''Rechenmotor'' unterliegt einer steten Qualitaetskontrolle zur Sicherstellung der Berechnungsgenauigkeit. Der vorliegende Aufsatz stellt den Prozess der Qualitaetssicherung anhand eines neuen Validierungsbeispiels in Form eines komplexen Verwaltungsgebaeudes vor. Die Fallstudie kann auch zur Validierung anderer Berechnungssysteme, die nicht auf dem Rechenkern basieren, genutzt werden. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 2. enl. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

Energy Technology Data Exchange (ETDEWEB)

Stan, Cornel [Berkeley Univ., CA (United States)]|[Paris Univ. (France)]|[Pisa Univ. (Italy)]|[Perugia Univ. (Italy)]|[Westsaechsischen Hochschule Zwickau (Germany)

2008-07-01

The implementation possibilities of future drive concepts - from hybrid systems comprising an electric motor and an internal combustion engine to fuel cells to alternative fuels like hydrogen or alcohol - will depend largely on quality criteria, e.g. power density, rotary momentum, acceleration characteristics, specific energy consumption, emissions of chemical substances, and noise. The boundary criteria for the introduction of realizeable concepts of alternative drives for motor cars will be defined by the availability and storability of the envisaged fuels, technical complexity, cost, safety, infrastructure and service. The book presents and analyzes the processes, drives and energy sources that can be combined in complex energy management systems for motor cars in accordance with the aforementioned criteria. Knowledge about these facts is indispensable for the development of new concepts. The 2nd edition describes many new developments in car propulsion systems as well as their combinations, new energy sources, energy converters and energy stores. All contents and literature reflect the latest state of science and technology. (orig.) [German] Ueber die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor ueber Brennstoffzellen bis zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualitaet eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind dafuer wichtige Merkmale zur Qualitaetsbeurteilung. Die Verfuegbarkeit und die Speicherfaehigkeit vorgesehener Energietraeger, die technische Komplexitaet, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen fuer die Einfuehrung realisierbarer Konzepte alternativer Antriebe fuer Automobile stellen. Die Uebersicht und die Analyse der Prozesse, Antriebsmaschinen und Energietraeger, die

Application of the results of pipe stress analyses into fracture mechanics defect analyses for welds of nuclear piping components; Uebernahme der Ergebnisse von Rohrsystemanalysen (Spannungsanalysen) fuer bruchmechanische Fehlerbewertungen fuer Schweissnaehte an Rohrleitungsbauteilen in kerntechnischen Anlagen

Energy Technology Data Exchange (ETDEWEB)

Dittmar, S.; Neubrech, G.E.; Wernicke, R. [TUeV Nord SysTec GmbH und Co.KG (Germany); Rieck, D. [IGN Ingenieurgesellschaft Nord mbH und Co.KG (Germany)

2008-07-01

For the fracture mechanical assessment of postulated or detected crack-like defects in welds of piping systems it is necessary to know the stresses in the un-cracked component normal to the crack plane. Results of piping stress analyses may be used if these are evaluated for the locations of the welds in the piping system. Using stress enhancing factors (stress indices, stress factors) the needed stress components are calculated from the component specific sectional loads (forces and moments). For this procedure the tabulated stress enhancing factors, given in the standards (ASME Code, German KTA regulations) for determination and limitation of the effective stresses, are not always and immediately adequate for the calculation of the stress component normal to the crack plane. The contribution shows fundamental possibilities and validity limits for adoption of the results of piping system analyses for the fracture mechanical evaluation of axial and circumferential defects in welded joints, with special emphasis on typical piping system components (straight pipe, elbow, pipe fitting, T-joint). The lecture is supposed to contribute to the standardization of a code compliant and task-related use of the piping system analysis results for fracture mechanical failure assessment. [German] Fuer die bruchmechanische Bewertung von postulierten oder bei der wiederkehrenden zerstoerungsfreien Pruefung detektierten rissartigen Fehlern in Schweissnaehten von Rohrsystemen werden die Spannungen in der ungerissenen Bauteilwand senkrecht zur Rissebene benoetigt. Hierfuer koennen die Ergebnisse von Rohrsystemanalysen (Spannungsanalysen) genutzt werden, wenn sie fuer die Orte der Schweissnaehte im Rohrsystem ausgewertet werden. Mit Hilfe von Spannungserhoehungsfaktoren (Spannungsindizes, Spannungsbeiwerten) werden aus den komponentenweise berechneten Schnittlasten (Kraefte und Momente) die benoetigten Spannungskomponenten berechnet. Dabei sind jedoch die in den Regelwerken (ASME

Symposium on hydrogen technology and fuel cells - opportunities for the economy; Symposium Wassertechnologie und Brennstoffzellen - Chancen fuer die Wirtschaft

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This volume contains 17 contributions on fuel cell technology and on the infrastructure required for hydrogen production and supply, in the form of abstracts and short reports. [German] Dieser Band enthaelt 17 Beitraege zum Themenkreis Brennstoffzellentechnologie und die dazu erforderliche Infrastruktur fuer die Wasserstofferzeugung und -versorgung in Form von Kurzfassungen und Vortragsfolien.

Software data acquisition system for the ''Chateau de Cristal'' multicounter 74 BaF2

International Nuclear Information System (INIS)

Adzama, G.

1985-01-01

The ''Chateau de Cristal'' is a 74 BaF2 detector assembly. Other detectors such as Ge (up to 12) and particle detectors can be added to this multidetector. The data acquisition system hardware and software are implemented in 3 VME crates. The operating system is handled by 68000 Motorola microprocessors. This work is dedicated to the initialization and control tasks of the multidetector. Handling of high voltage power supply for the 74 BaF2 detectors via a RS 232 C serial port, CAMAC initialization for the ADC 4300 Lecroy and DFC modules, data exchange between the 3 VME crates and automatic energy calibration for the BaF2 detectors. All the software is written in 68000 Motorola assembly language [fr

Inverter integrated in module - a comparison of different circuit concepts regarding costs, volumes and efficiency; Modulintegrierte Wechselrichter - ein Vergleich verschiedener Schaltungskonzepte bezueglich Kosten, Volumen und Wirkungsgrad

Energy Technology Data Exchange (ETDEWEB)

Myrzik, J. [Kassel Univ. (Gesamthochschule) (Germany); Krieger, T.; Zacharias, P. [Institut fuer Solare Energieversorgungstechnik (ISET), Kassel (Germany); Nijs, J.; Mey, B. de [IMEC, Leuven (Belgium); O`Mathuna, S.; Meinhardt, M. [NMRC, Cork (Ireland); Held, E. de; Jantsch, M. [ECN, Petten (Netherlands); Hofkens, H. [SOLTECH, Leuven (Belgium)

1998-12-01

In the context of a project supported by the EU, a miniaturised PV inverter integrated in a module is being developed as a laboratory sample. The main aim of this project is the provision of know-how for the industry. In order to provide aids to decision-making for industrial manufacture, different lines of development are being worked out for this purpose. The systematic listing and judging of different inverter topologies has proved successful in the development of a string inverter. To determine a suitable inverter topology, a systematic procedure is shown in this article, which was carried out with the aid of different circuit calculations. [Deutsch] Im Rahmen eines von der EU gefoerderten Projektes wird ein modulintegrierter, miniaturisierter PV-Wechselrichter als Labormuster entwickelt. Uebergeordnetes Ziel dieses Projektes ist die Bereitstellung von Know-how fuer die Industrie. Hierzu werden verschiedene Entwicklungslinien erarbeitet, um Entscheidungshilfen fuer die industrielle Fertigung bereit zu stellen. Bereits bei der Entwicklung eines Stringwechselrichters hat sich die systematische Aufstellung und Beurteilung verschiedener Wechselrichtertopologien bewaehrt. Zur Ermittlung einer geeigneten Wechselrichtertopologie wird in diesem Beitrag eine systematische Vorgehensweise aufgezeigt, die mit der Hilfe verschiedener Schaltungskalkulationen durchgefuehrt wurde. (orig.)

Concept for inland wind power plants and wind parks - an example from North-Rhine Westphalia; Rahmenkonzept fuer Windkraftanlagen und -parks im Binnenland - ein Beipiel aus Nordrhein-Westfalen

Energy Technology Data Exchange (ETDEWEB)

Kleinschmidt, V. [UVP-Forschungsstelle, Fachgebiet Landschaftsoekologie und Landschaftsplanung, Fachbereich Raumplanung, Dortmund Univ. (Germany); Schauerte-Lueke, N. [UVP-Forschungsstelle, Fachgebiet Landschaftsoekologie und Landschaftsplanung, Fachbereich Raumplanung, Dortmund Univ. (Germany); Bergmann, R. [PRO TERRA TEAM Dienstleistungs- und Forschungsgesellschaft fuer Umwelttechnologien GmbH und Co. KG, Dortmund (Germany)

1994-12-31

Because of the increasing number of wind energy plants, environmental protection gets into a conflict of aims. On the one hand the change of the `Stromeinspeisungsgesetz` (law arranging the insertion of privately produced electricity into the public system) and the improved support for wind energy plants is to appreciate for the reasons of a reduction of CO{sub 2} and other harmful substances. But on the other hand wind energy plants have negative environmental effects onto the sites they are built on, as for example disturbances of the birds their breeding nest and feeding habitat, injury or death following collision with a blade or tower or simply disturbances of the landscape view. To avoid possible conflicts and increase the acceptance of wind energy plants, for the district of Soest a concept on a strategic level was developed, in which sites were determined as optimal, restrictional or excluding the construction of wind energy plants. This concept may not only help to avoid conflicts but may also play an active part in the promotion of wind energy plants by defining the sites suitable for wind energy plants and making them public. All in all the procedure of approval was simplified and therefore accelerated with the invention of this concept. (orig.) [Deutsch] Durch die zunehmende Anzahl von Windkraftanlagen geraet der Umweltschutz in einen Zielkonflikt. Einerseits ist die Aenderung des Stromeinspeisungsgesetzes und die verbesserte Foerderung fuer Windkraftanlagen aus Gruenden der CO{sub 2} und Schadstoffemissionseinsparungen sehr zu begruessen. Andererseits haben die Windkraftanlagen direkt an den Aufstellungsorten negative Auswirkungen auf die Umwelt, wie zum Beispiel Stoerung der Voegel in Nahrungs- und Bruthabitaten, Vogelschlag oder Beeintraechtigung des Landschaftsbildes. Um moegliche Konflikte weitgehend zu vermeiden und die Akzeptanz fuer Windkraftanlagen zu erhoehen, wurde fuer den Kreis Soest ein Rahmenkonzept erarbeitet, in dem Gunst-, Restriktions

LLRF and timing system for the SCSS test accelerator at SPring-8

Energy Technology Data Exchange (ETDEWEB)

Otake, Yuji, E-mail: otake@spring8.or.jp [RIKEN, SPring-8 Center, XFEL Research and Development Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); JASRI, XFEL Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Ohshima, Takashi [RIKEN, SPring-8 Center, XFEL Research and Development Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); JASRI, XFEL Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Hosoda, Naoyasu [JASRI, XFEL Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Maesaka, Hirokazu; Fukui, Toru [RIKEN, SPring-8 Center, XFEL Research and Development Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); JASRI, XFEL Division, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Kitamura, Masanobu [Hitachi Zosen Corporation, 7-89, Nanko-kita 1-chome, Suminoe-ku, Osaka 559-8559 (Japan); Shintake, Tsumoru [The Okinawa Institute of Science and Technology Graduate University, Tancha, Onna-Son, Kunigami, Okinawa 904-0495 (Japan)

2012-12-22

The 250 MeV SCSS test accelerator as an extreme-ultra violet (EUV) laser source has been built at SPring-8. The accelerator comprises a 500 kV thermionic gun, a velocity bunching system using multi-sub-harmonic bunchers (SHB) in an injector and a magnetic bunch compressor using a chicane of 4 bending magnets, a 5712 MHz main accelerator to accelerate an electron beam up to 250 MeV, and undulators to radiate the EUV laser. These bunch compression processes make short bunched electrons with a 300 A peak current and a 300 fs pulse width. The pulse width and peak current of an electron beam, which strongly affect the pulse width and intensity of the laser light, are mainly decided by the pulse compression ratio of the velocity bunching and the magnetic bunch compressing processes. The compression ratio is also determined due to an energy chirp along the beam bunch generated by an off-crest rf field at the SHB and cavities before the chicane. To constantly keep the beam pulse-width conducted by rf and timing signals, which are temporally controlled within subpicoseconds of the designed value, the low-level rf and timing system of the test accelerator has been developed. The system comprises a very low-noise and temporally stable reference signal source, in-phase and quadrature (IQ) modulators and demodulators, as well as VME type 12 bits analog-to-digital and digital-to-analog converter modules to manipulate an rf phase and amplitude by IQ functions for the cavity. We achieved that the SSB noise of the 5712 MHz reference signal source was less than -120 dBc/Hz at 1 kHz offset from the reference frequency; the phase setting and detecting resolution of the IQ-modulators and demodulators were within +/-0.5 Degree-Sign at 5712 MHz. A master trigger VME module and a trigger delay VME module were also developed to activate the components of the test accelerator. The time jitter of the delay module was less than 0.7 ps, sufficient for our present requirement. As a result, a

Critical review of the >>Stellungnahme zur 'deutschen Risikostudie' der Gesellschaft fuer Reaktorsicherheit (GRS)<< by the Bremer Arbeits- und Umweltschutz-Zentrum

International Nuclear Information System (INIS)

Danzmann, H.J.

1981-08-01

In August 1979, the German Risk Study was presented to the public by the Federal Minister of Research and Technology. The main contractor to prepare the German Risk Study is the Gesellschaft fuer Reaktorsicherheit (GRS). The objective of the Study is to investigate the collective risk involved in accidents at nuclear power plants. The essential results and statements of the Study are comprised in a Summary submitted to the public in August 1979, too. In September 1979, the 'Bremer Arbeits- und Umweltschutz-Zentrum' ('BAUZ') published a 'Stellungnahme zur 'deutschen Risikostudie' der Gesellschaft fuer Reaktorsicherheit (GRS)' (Review of the German Risk Study of the Gesellschaft fuer Reaktorsicherheit), dealing only with the summary of this study, however. The BAUZ review is extremely critical of the German Risk Study and ends in condemning the peaceful utilization of nuclear energy as well as the competent authorities. The GRS review critique in hand scrutinizes the BAUZ paper according to the run of the text. Deliberately, one has renounced a comment in such cases where the reproaches slip in the political or ideological field. The object of the BAUZ review as well as of the GRS critique is the matter to be investigated, aim and methods of the investigations and the results of the German Risk Study. The revision of the review acknowledges that in some cases the tendency of criticism is justified. Often, however, the critique is only a sharpened repetition of what the GRS itself has identified as restrictions of accuracy and inherent significance of the results. In most items, however, the critique is rejected as to be wrong or not proof. (orig./HP) [de

Ageing management of mechanical components; Alterungsmanagement fuer mechanische Komponenten

Energy Technology Data Exchange (ETDEWEB)

Hienstorfer, W. [TUeV Energie- und Systemtechnik GmbH, Filderstadt (Germany); Herter, K.H.; Schuler, X. [Materialpruefungsanstalt, Univ. Stuttgart, Stuttgart (Germany)

2004-07-01

Lifetime management, ageing management and integrity testing are part of technical rules and specifications. The contribution focuses on ageing management, for which different technical measures are required depending on the safety relevance of the components and systems involved. The procedure for ensuring adherence to the specified quality is outlined, and the required technical and organisational measures are explained. (orig.) [German] In Leitlinien und Regelwerken sind fuer mechanische Komponenten Anforderungen zur Absicherung des Betriebs waehrend der gesamten Lebensdauer (Lebensdauermanagement), zur Absicherung von Alterungsphaenomenen (Alterungsmanagement) als auch zum Nachweis der Integritaet (Integritaetsnachweis, z.B. mit dem Ziel des Bruchausschlusses) enthalten. Ein wesentliches Element stellt dabei das Alterungsmanagement dar. Je nach sicherheitstechnischer Bedeutung der zu betrachtenden Komponenten und Systeme oder auch aus Gruenden der vorbeugenden Instandhaltung sind unterschiedliche technische Massnahmen erforderlich. Die Vorgehensweise zur Absicherung der im Betrieb geforderten Qualitaet wird aufgezeigt und die dabei erforderlichen technischen und organisatorischen Massnahmen werden erlaeutert. (orig.)

Target values for indoor air quality. Judging indoor air quality by means of aggregate volatile organic compounds (TVOC value); Richtwerte fuer die Innenraumluft. Die Beurteilung der Innenraumluftqualitaet mit Hilfe der Summe der fluechtigen organischen Verbindungen (TVOC-Wert)

Energy Technology Data Exchange (ETDEWEB)

Seifert, B. [Umweltbundesamt Berlin (Germany). Inst. fuer Wasser-, Boden- und Lufthygiene

1999-03-01

The article discusses the existing bases for the derivation and use of assessment criteria for TVOC concentrations. For enhanced understanding, some aspects of VOC analytics are dealt with beforehand. (orig./MG) [Deutsch] Im vorliegenden Artikel werden die vorhandenen Grundlagen fuer die Ableitung und Verwendung von Bewertungskriterien fuer TVOC-Konzentrationen diskutiert. Zum besseren Verstaendnis werden einleitend einige Aspekte der VOC-Analytik eroertert. (orig/MG)

Textbook with exercises on automation and process control. An introduction for engineers, industrial engineers and experts in business economics; Lehr- und Uebungsbuch Automatisierungs- und Prozessleittechnik. Eine Einfuehrung fuer Ingenieure, Wirtschaftsingenieure und Betriebswirtschaftler

Energy Technology Data Exchange (ETDEWEB)

Bergmann, J. [Hochschule fuer Technik, Wirtschaft und Sozialwesen Zittau/Goerlitz (FH), Zittau (Germany)

1999-07-01

This textbook addresses students at university level. It contains many examples and exercises and presents a detailed explanation of modelling in automation engineering, including equations and algorithms. Important problems of automation and their solutions are illustrated by an exemplary process control problem that recurs in the book and can be recalculated on the reader's PC. A CD-ROM is enclosed with a process automation system that can be analyzed and tested in several variants. [German] Dieses Lehr- und Uebungsbuch zur Automatisierungs- und Prozessleittechnik - eignet sich fuer die Ausbildung an Technischen Hochschulen, Fachhochschulen und Berufsakademien - ist fuer Studenten mit Automatisierungs- und Prozessleittechnik im Nebenfach konzipiert - enthaelt eine fuer das Grundverstaendnis notwendige, mit vielen Beispielen und Uebungen ergaenzte Lehrstoffauswahl - erlaeutert sehr verstaendlich die spezielle Modellwelt der Automatisierungstechnik mit ihren Beschreibungsformen und Loesungsalgorithmen - behandelt wesentliche Problemstellungen der Automatisierung und deren Loesungen anhand einer durchgaengigen, am Rechner nachvollziehbaren Prozessleitaufgabe. Das auf der beigefuegten CD-ROM visualisierte Prozessautomatisierungssystem kann in Variationen analysiert und getestet werden. (orig.)

Fundamentals of heuristic approach to the selection of adsorption liquids for hydrocarbons; Grundlagen einer Heuristik zur Auswahl von Absorptionsfluessigkeiten fuer Kohlenwasserstoffe

Energy Technology Data Exchange (ETDEWEB)

Weisweiler, W. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Chemische Technik; Winterbauer, H. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Chemische Technik

1995-11-01

The present paper describes a possible way of finding the most appropriate absorbent for a given air pollutant or air pollutant mixture. (orig./SR) [Deutsch] Die vorliegende Arbeit beschreibt eine Moeglichkeit mit der fuer verschiedene organische Luftschadstoffe und Schadstoffgemische die geeignetsten Absorptionsmittel gefunden werden koennen. (orig./SR)

Distributed data acquisition for BNL802 II: Software

International Nuclear Information System (INIS)

Watson, W.A. III; LeVine, M.J.

1987-01-01

Multiple processes running on a VAX and on VME-based processors allow up to 16 detector sub-systems to run independently or coupled, with an aggregate throughput of 600 Kbytes/sec. VMS facilities are used extensively for command definition, message passing, controlling access to CAMAC and high voltage modules, and maintaining shared data structures

The driver in the 21st century. Demands, applications, aspects of man-machine systems. Lectures; Der Fahrer im 21. Jahrhundert. Anforderungen, Anwendungen, Aspekte fuer Mensch-Maschine-Systeme. Plenarvortraege

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

A high grade of mobility is the basis of our economic development. The innovations in the automotive- and deliver industry lead to different fulfillments of customer expectations on vehicle operation. Also in the railway sector increasing requirements on the operators involve a change of view within design of man-machine interfaces. The transmission of information and transfer of reactions require advanced and balanced concepts for operating and monitoring of modern automobiles. The integral connection of competence in technology, design and ergonomics, sense- and traffic psychology as well as legal problems lead to new challenges and possibilities. (GL) [German] Der Fahrer im 21. Jahrhundert - Anforderungen, Anwendungen, Aspekte fuer Mensch-Maschine-Systeme - unter diesem Motto wird die interessante Fachtagung ''Der Fahrer im 21. Jahrhundert'' fortgefuehrt. Ein hohes Mass an Mobilitaet ist Grundlage unserer wirtschaftlichen Entwicklung. Die Innovationen in der Automobil- und Zuliefererindustrie fuehren zu einer differenzierten Erfuellung der Kundenerwartungen an die Bedienung der Fahrzeuge. Auch im Bereich Bahn bedingen die steigenden Anforderungen an die Fahrzeugfuehrer ein Umdenken bei der Gestaltung der Mensch-Maschine-Schnittstelle. Die Vermittlung von Informationen und die Umsetzung adaequater Reaktionen erfordern neue und ausgewogene Konzepte fuer das Bedienen und Beobachten moderner Fahrzeuge. Die integrale Verbindung von Kompetenz in Technologie, Design und Ergonomie, Wahrnehmungs- und Verkehrspsychologie sowie rechtlichen Fragestellungen fuehren hier zu neuen Herausforderungen und Moeglichkeiten. Die Tagung moechte wieder visionaere Loesungsansaetze aufzeigen und auch das Machbare diskutieren. Nutzen Sie die Gelegenheit, mit namhaften Referenten aus Industrie und Wissenschaft, Fach- und Fuehrungskraeften zu sprechen und auf dieser Veranstaltung neue Bedien- und Informationskonzepte, Teilloesungen fuer die unterschiedlichen Fahraufgaben

Electricity from the desert; Strom aus der Wueste

Energy Technology Data Exchange (ETDEWEB)

Schwarzburger, Heiko; Ullrich, Sven

2013-06-15

The North African sun seems ideal for photovoltaic use. However, photovoltaic modules must withstand extreme loads in the desert. [German] Die Sonne Nordafrikas scheint ideal fuer die Photovoltaik-Nutzung. Jedoch muessen Photovoltaik-Module in der Wueste extremen Belastungen standhalten.

Parameters for viable process combinations; Randbedingungen fuer sinnvolle Verfahrenskombinationen

Energy Technology Data Exchange (ETDEWEB)

Lahl, U.; Zeschmar-Lahl, B. [BZL Kommunikation und Projektsteuerung GmbH, Oyten (Germany)

1998-09-01

The following parameters merit examination in determining the viability of process combinations: conceptual and technical soundness, environmental acceptability, energy balance, flexibility, costs, economic risk potential. The present contribution on this subject is not intended to take the place of or cover the scope of single-case studies. In practice, viability studies on process combinations have to deal with concrete plans involving precisely defined material flow balances, emissions, costs etc. The present paper therefore only presents the basic principles of this type of study. [Deutsch] Folgende Randbedingungen fuer sinnvolle Verfahrenskombinationen sind zu untersuchen: - konzeptionelle und technische Stimmigkeit, - Umweltvertraeglichkeit, - energetische Bilanz, - Flexibilitaet, - Kosten, - oekonomisches Risikopotential. Nun kann dieser Beitrag zum Thema keine Einzelfallbetrachtung ersetzen bzw. abdecken. Im Rahmen einer echten Pruefung auf `Sinnhaftigkeit` einer Kombinationsloesung stehen sich ganz konkrete Planungen gegenueber, die wiederum mit definierten Stoffflussbilanzen, Emissionen, Kosten usw. verbunden sind. Im Rahmen dieser Betrachtung koennen nur die Grundzuege einer derartigen Pruefung dargestellt werden. (orig.)

Technology development for crystalline silicon thin-film solar cells (TEKSI). Final report; Technologieentwicklung fuer kristalline Silizium-Duennschicht-Solarzellen (TEKSI). Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Wettling, W.; Hurrle, A.; Bau, S.; Eyer, A.; Haas, F.; Huljic, D.; Kieliba, T.; Lautenschlager, H.; Luedemann, R.; Lutz, F.; Preu, R.; Reber, S.; Rentsch, J.; Schaefer, S.; Schetter, C.; Schillinger, N.; Warta, W.; Zimmermann, W.

2002-10-01

The results of a project aimed at the development of crystalline solar wafers are presented. All process stages were reviewed in detail with a view to industrial fabrication. This included also the further development of machinery, e.g. for selective zone melting recrystallisation, CVD silicon deposition, and characterisation of deposited films and solar cells. Not all the envisaged goals were achieved. For example, efficiencies up to 17.6 percent were possible on direct epitactic, highly doped CZ-Si substrates and with a high-efficiency process, but the normal efficiencies of solar cells on SSP or on ceramic substrates were in the range of 8-11 percent. This underlines the need for further research on the development of appropriate substrates with reproducible properties. [German] Im vorliegenden Bericht werden die Ergebnisse eines mehrjaehrigen Projekts zur Entwicklung der kristallinen Silizium-Duennschichtsolarzelle (KSD-Solarzelle) vorgestellt. Die Arbeiten waren eine konsequente Fortsetzung der bereits in einem Vorgaengerprojekt (FKZ 0328986B) bearbeiteten Themen. Alle zur Herstellung solcher Solarzellen noetigen Prozessschritte im Rahmen des am Fraunhofer ISE verfolgten Hochtemperaturpfads wurden detailliert untersucht, insbesondere im Hinblick auf eine industrielle Fertigung. Ein wesentlicher Teil der Arbeiten befasste sich deshalb auch mit der Weiterentwicklung von Geraeten, so z. B. fuer die Zonenschmelzrekristallisation, fuer die Silizumabscheidung mittels CVD-Verfahren und fuer die Charakterisierung abgeschiedener Schichten und Solarzellen. Nicht alle der ehrgeizigen Projektziele konnten erreicht werden. Auf direkt epitaxierten, hochdotierten CZ-Si-Substraten konnten zwar mit einem High-Efficiency-Prozess Wirkungsgrade bis zu 17.6%, mit fertigungsrelevanter Siebdrucktechnologie bis 13% erzielt werden. Die Wirkungsgrade von Solarzellen auf SSP oder auf Keramiksubstraten lagen aber alle im Bereich von 8-11%. Dies zeigt deutlich, dass die Entwicklung

PEM fuel cells for mobile applications. Project part: Membrane development. Final report; PEM-Brennstoffzellen fuer mobile Anwendungen. Teilprojekt: Membranentwicklung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Frank, G

1999-01-20

Polymer-Electrolyte-Membrane Fuel Cells (PEMFC) are attractive candidates for next century propulsion systems in passenger cars. The technical feasibility has been demonstrated by several car manufacturers. Today, PEMFC lack economical viability. One of the reasons is the cost of currently used materials, e.g. membranes. This project target towards the development of low cost, non-fluorinated membranes, which fulfil all technical requirements in PEMFC systems. In the frame of this project we were able to successfully develop new membranes based on polyaromatic polymers, which can be produced on a technical scale. These membranes enabled high power densities, exceeding 700 mW/cm{sup 2} at 80 C and their longevity has been demonstrated successfully up to 5,000 hours. Therefore, these membranes have sufficient electrochemical stability for the application in fuel cells. The prices in mass production for these new membranes can get significantly below prices of fluorinated membranes. (orig.) [Deutsch] Polymer-Elektrolyt-Membran-Brennstoffzellen (PEMFC) gelten als aussichtsreiche Kandidaten fuer alternative Fahrzeugantriebe fuer das naechste Jahrzehnt. Die technische Machbarkeit ist bereits mehrfach demonstriert worden. Allerdings sind die Kosten der PEMFC-Systeme noch zu hoch u.a. durch zu hohe Kosten der eingesetzten Materialien, so auch der Membranen. Ziel des Projektes war daher die Entwicklung kostenguenstiger, nichtfluorierter Membranen, die die technischen Anforderungen fuer die Anwendung in der PEM-Brennstoffzelle erfuellen. Im Projekt konnten erfolgreich Membranen auf Basis polyaromatischer Polymere entwickelt werden, die sich auch im technischen Massstab herstellen lassen. Die Membranen ermoeglichen hohe Leistungsdichten groesser 700 mW/cm{sup 2} bei Betriebstemperaturen von 80 C. Die Lebensdauer der Membranen wurde erfolgreich ueber 5.000 Stunden nachgewiesen. Die elektrochemische Stabilitaet der untersuchten Materialien ist damit gegeben. Die Preise dieser

GLCTA control system

International Nuclear Information System (INIS)

Terunuma, N.; Hayano, H.; Higo, T.; Saeki, T.; Suehara, T.; Watanabe, K.

2004-01-01

Research and development for the high power X-band RF technologies have been performed on the GLC Test Accelerator, GLCTA, since fall of 2003. The control system of this facility is based on the PC-Linux servers that handle the CAMAC, VME and PLC modules. Automated RF processing and data accumulation of the RF breakdown have been performed. (author)

PEM-fuel cells for mobile application. Sub task: development of electrocatalysts. Final report; PEM-Brennstoffzelle fuer mobile Anwendung. Teilprojekt: Katalysatorenentwicklung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Starz, K A

1999-01-01

PEM fuel cells are gaining increasing importance for use in automotive application. The goal of the research program reported here was to develop the basic technology and components for PEMFC stacks for use in transport applications. The sub-task of Degussa was to develop improved electrocatalysts for PEMFC single cells and stacks. The technical objectives of the research project were met. Electrocatalysts, characterized by a high Pt-dispersion, high surface area and excellent activity, were developed. With this material, considerable progress was made to reduce the total platinum loading of PEMFC cells and stacks to about 0,5 mgPt/cm{sup 2}. With this value, the goal of the program (<0,8 mg/cm{sup 2}) was significantly surpassed. Additionally, higher power densities of >0.4 W/cm{sup 2} were achieved at Degussa for hydrogen/air and reformate/air operation of the PEMFC. A CO-tolerant anode electrocatalyst, exhibiting a CO-tolerance of up to 100 ppm CO, enables the operation of PEMFC stacks with on-board generated methanol reformate. The performance of the new electrocatalyst materials was verified by DaimlerChrysler in a PEMFC demonstration stack at the end of the program. (orig.) [Deutsch] PEM-Brennstoffzellen gewinnen fuer die mobile Anwendung immer mehr an Bedeutung. Im Rahmen des hier beschriebenen Leitprojektes sollten die Basistechnologien fuer den Einsatz der PEM-Brennstoffzelle im mobilen Bereich (Elektrotraktion) entwickelt werden. Das Teilprojekt der Degussa befasst sich mit der Entwicklung von verbesserten Elektrokatalysatoren fuer PEM-Brennstoffzellenstacks. Die technischen Arbeitsziele des Vorhabens wurden erreicht. So konnten Elektrokatalysatoren bereitgestellt werden, die sich durch eine hohe Pt-Dispersion, eine grosse Pt-Oberflaeche sowie eine sehr gute Aktivitaet auszeichnen. Mit diesen Elektrokatalysatoren gelang es, die Platinbeladung der PEM-Elektroden (Anode und Kathode) erheblich abzusenken. Mit einer Gesamtplatinbeladung von 0,5 mg/cm{sup 2

Comparison between airborne pollution measurement and calculation at 14 measuring points in the Federal State of Brandenburg; Vergleich Immissionsmessung - Immissionsberechnung fuer 14 verkehrsnahe Messpunkte im Land Brandenburg

Energy Technology Data Exchange (ETDEWEB)

Friedrich, U. [Landesumweltamt Brandenburg, Potsdam (Germany). Abt. Immissionsschutz; Schierbaum, I. [Landesumweltamt Brandenburg, Potsdam (Germany). Abt. Immissionsschutz

1997-02-01

Airborne pollution measurements for the pollutants benzene and soot were carried out at 14 inner-city measuring points, close to traffic, in the Federal State of Brandenburg, using a distribution model for ideal build-up streets (CPB model) and a model assuming missing fringe buildings (Gauss model). The calculated annual mean values were compared with the measured annual mean values. Benzene: The annual mean values calculated with the help of the CPB model diverged from the measured annual mean values by {+-}25%, apart from one exception. Soot: The calculated annual mean values were always lower than the measured annual mean values. Emission-sources not considered in the calculation (tyre abrasion, secondary dust) are assumed to be the main cause for this difference. (orig.) [Deutsch] Es wurden an 14 innerstaedtischen verkehrsnahen Messpunkten im Land Brandenburg mit einem Ausbreitungsmodell fuer ideale Strassenschluchten (CPB-Modell) und einem Modell unter der Annahme fehlender Randbebauung (Gauss-Modell) Immissionsberechnungen fuer die Schadstoffe Benzol und Russ durchgefuehrt. Benzol: Die mittels CPB-Modell berechneten Jahresmittelwerte wichen bis auf eine Ausnahme maximal um {+-}25% von den Jahresmitteln der Messergebnisse ab. Russ: Die berechneten Jahremittel wiesen stets geringere Werte als die Jahresmittelwerte der Messung auf. Als Hauptursache fuer diese Differenz werden Emissionsquellen vermutet, die nicht bei der Berechnung beruecksichtigt wurden (Reifenabrieb, Sekundaerstaub). (orig.)

Single room control for user-optimised room air conditions; Einzelraumregelung fuer nutzungsoptimiertes Raumklima

Energy Technology Data Exchange (ETDEWEB)

Lezius, A. [Staefa Control System GmbH, Leinfelden-Echterdingen (Germany)

1995-12-31

In chapter 14 of the anthology about building control the single room control for achieving user-optimised room air conditions is described. The following aspects are discussed: What is comfort? What is economic efficiency? Systems for secondary air treatment, adapted functions of the measurement and control technique, management functions, orientation of the demand at the use, investment and amortisation. (BWI) [Deutsch] Kapitel 14 des Sammelbandes ueber Building control ist dem Thema der Einzelraumregelung zur Erzielung eines nutzungsoptimierten Raumklimas gewidmet. In diesem Zusammenhang werden folgende Themenbereiche angesprochen: Was ist Komfort? Was ist Wirtschaftlichkeit? Systeme fuer sekundaere Luftbehandlung; Angepasste Funktionen der MSR-Technik; Managementfunktionen; Bedarfsorientierung an der Nutzung; Investition und Amortisation. (BWI)

Modern recording systems for services able to meet the competition; Moderne Erfassungssysteme fuer wettbewerbsfaehige Dienstleistungen

Energy Technology Data Exchange (ETDEWEB)

Drumm, M.

2000-07-01

Modern recording systems form the basis for competitive services. They are, however, only successful when integrated precisely into a lean running organization. By means of practical examples the necessity to place great emphasis on the costs of a system besides the investment costs when deciding about a recording system, will be examined. The significant changes on the energy market and the increasing demand of the housing economy for a comprehensive offer of services from the supply industry are main initiators for a whole new line of businesses on the supply economy sector. The great challenge for the supply industry lies in the task to install lean and effective system which are on one hand reliable and easy to handle for the whole duration of the contract and on the other hand are so cost efficient, that an adequate profitability can be ensured (see also: 'The secret winners', Zfk October 1999). A decisive factor for this reason is the metering technology, which has to ensure for the whole duration of the contract that correct consumption values are registered, on the basis of which as fast and punctual as possible a legally safe invoicing can be prepared. (orig.) [German] Moderne Erfassungssysteme bilden die Grundlage fuer wettbewerbsfaehige Dienstleistungen, die jedoch erst bei sauberer Einbindung in eine schlanke Ablauforganisation erfolgreich sind. Anhand von Praxisbeispielen wird die Notwendigkeit betrachtet, bei der Entscheidung fuer ein Erfassungssystem neben den Investitionskosten den Systemkosten entscheidendes Gewicht zu verleihen. (orig.)

Design of the data acquisition system for the nuclear physics experiments at VECC

International Nuclear Information System (INIS)

Dhara, P.; Roy, A.; Maity, P.; Singhai, P.; Roy, P.S.

2012-01-01

The beam from K130 room temperature cyclotron is being extensively used for nuclear physics experiments for last three decades. The typical beam energy for the experiments is approximately 7-10 MeV/nucleon for heavy ions and 8-20 MeV/nucleon for light ions. The number of detectors used, may vary from one channel to few hundreds of detector channels. The proposed detector system for experiments with the superconducting cyclotron may have more than 1200 detector channels, and may be generating more than one million parameters per second. The VME (Versa Module Europa) and CAMAC (Computer Automated Measurement and Control) based data acquisition system (DAQ) is being used to cater the experimental needs. The current system has been designed based on various commercially available modules in NIM (Nuclear Instrumentation Module), CAMAC and VME form factor. This type of setup becomes very complicated to maintain for large number of detectors. Alternatively, the distributed DAQ system based on embedded technology is proposed. The traditional analog processing may be replaced by digital filters based FPGA (Field Programmable Gate Array) boards. This paper describes the design of current DAQ system and the status of the proposed scheme for distributed DAQ system with capability of handling heterogeneous detector systems. (author)

A real-time digital control, data acquisition and analysis system for the DIII-D multipulse Thomson scattering diagnostic

International Nuclear Information System (INIS)

Greenfield, C.M.; Campbell, G.L.; Carlstrom, T.N.; DeBoo, J.C.; Hsieh, C.-L.; Snider, R.T.; Trost, P.K.

1990-10-01

A VME-based real-time computer systems for laser control, data acquisition and analysis for the DIII-D multipulse Thomson scattering diagnostic is described. The laser control task requires precise timing of up to 8 Nd:YAG lasers, each with an average firing rate of 20 Hz. A cpu module in real-time multiprocessing computer system will operate the lasers with evenly staggered laser pulses or in a ''burst mode'', where all available (fully charged) lasers can be fired at 50--100 μsec intervals upon receipt of an external event trigger signal. One of more cpu modules, along with a LeCroy FERA (Fast Encoding and Readout ADC) system, will perform real-time data acquisition and analysis. Partial electron temperature and density profiles will be available for plasma feedback control within 1 msec following each laser pulse. The VME-based computer system consists of 2 or more target processor modules (25 MHz Motorola 68030) running the VMEexec real-time operating system connected to a Unix based host system (also a 68030). All real-time software is fully interrupt driven to maximize system efficiency. Operator interaction and (non real-time) data analysis takes place on a MicroVAX 3400 connected via DECnet. 17 refs., 1 fig

Real-time digital control, data acquisition, and analysis system for the DIII-D multipulse Thomson scattering diagnostic

International Nuclear Information System (INIS)

Greenfield, C.M.; Campbell, G.L.; Carlstrom, T.N.; DeBoo, J.C.; Hsieh, C.; Snider, R.T.; Trost, P.K.

1990-01-01

A VME-based real-time computer system for laser control, data acquisition, and analysis for the DIII-D multipulse Thomson scattering diagnostic is described. The laser control task requires precise timing of up to eight Nd:YAG lasers, each with an average firing rate of 20 Hz. A cpu module in a real-time multiprocessing computer system will operate the lasers with evenly staggered laser pulses or in a ''burst mode,'' where all available (fully charged) lasers can be fired at 50--100 μs intervals upon receipt of an external event trigger signal. One or more cpu modules, along with a LeCroy FERA (fast encoding and readout ADC) system, will perform real-time data acquisition and analysis. Partial electron temperature and density profiles will be available for plasma feedback control within 1 ms following each laser pulse. The VME-based computer system consists of two or more target processor modules (25 MHz Motorola 68030) running the VMEexec real-time operating system connected to a Unix-based host system (also a 68030). All real-time software is fully interrupt driven to maximize system efficiency. Operator interaction and (non-real-time) data analysis takes place on a MicroVAX 3400 connected via DECnet

New energy conversion processes and neglected auxiliary systems - a treasure trove for energy service providers; Neue Techniken und vernachlaessigte Nebenanlagen - eine Fundgrube fuer Energiedienstleister

Energy Technology Data Exchange (ETDEWEB)

Jochem, E.

1998-12-31

The paper shows that apart from the risks, the deregulation of the energy sector also offered new chances, which recently materialized in three emerging independent trends, initiating innovative approaches for energy conversion and applications and demand for new knowledge-based, near-production energy services as a new field for engineers: Providers of energy efficiency-related technology widen their capabilities by adding the new business segment of energy service marketing. Industrial energy users more strongly consider outsourcing of energy conversion systems and the relevant contracting schemes as an option for reducing energy costs. Public enterprise as energy users started following this trend, all the more as insufficient financial resources do not permit them to reinvest. The paper discusses the conversion processes which currently open up promising chances for energy service producers. (orig./CB) [Deutsch] Neben Gefahren, die inhaerentes Merkmal der Liberalisierung sind, zeichnen sich drei unabhaengige Entwicklungen ab, die innovative Initiativen in der Energiewandlung und -nutzung staerken und wissensintensive produktionsnahe Dienstleistungen als zentrale Aufgabe fuer den Ingenieur initieren: - Die Energieeffizienz-Technologieanbieter nehmen die Energiedienstleistungen in ihre Angebotspalette auf. - Die betrieblichen Energieanwender beginnen zunehmend, ueber das Outsourcing energiewandelnder Anlagen Energiekosten zu senken. - Die oeffentliche Hand als Energieanwender beginnt aehnlich zu denken, zumal sie infolge der hohen Verschuldung unzureichende finanzielle Mittel fuer Reinvestitionen hat. Hierueber sei kurz berichtet, bevor auf die Techniken eingegangen wird, die sich besonders aus heutiger Sicht fuer Energiedienstleister eignen. (orig./RHM)

KS R41B. A high performance steel-aluminium composite material; KS R41B. Ein Stahl-Aluminium-Verbundwerkstoff fuer hohe Belastungen

Energy Technology Data Exchange (ETDEWEB)

Deicke, K. [KS Gleitlager GmbH (Germany). Bereich Metall; Matucha, H.; Schubert, W. [KS Gleitlager GmbH, St. Leon-Rot (Germany); Steffens, T. [KS Gleitlager GmbH, Neckarsulm (Germany)

2002-08-01

Aluminium-tin alloys have been well-known for a long time and have proved to be suitable bearing materials for crankshaft bearings for many years. The known alloy AlZn4,5SiCuPb is one of the aluminium materials capable of sustaining the highest mechanical loads. In order to achieve optimum sliding properties, it would be necessary to increase the share of the soft lead phase in the alloy. This article by KS Gleitlager GmbH shows a reasonably priced manufacturing technology for high-performance aluminium-zinc-silicon-copper alloys. (orig.) [German] Die Aluminium-Zinn-Lagerlegierungen sind seit langem bekannt und haben sich seit Jahren als Lagerwerkstoff fuer Kurbelwellenlager bewaehrt. Die Legierung AlZn4,5SiCuPb gehoert zu den mechanisch am hoechsten belastbaren Aluminium-Werkstoffen. Um optimale Gleiteigenschaften zu erzielen, muesste in der Legierung der Anteil des weichen Bleis noch weiter erhoeht werden. Dieser Beitrag der KS Gleitlager GmbH zeigt eine kostenguenstige Herstelltechnologie fuer hochbelastbare Aluminium-Zink-Silizium-Kupfer-Legierungen. (orig.)

Zero-leakage shut-off butterflies for high-temperature applications; Dichtschliessende Absperrklappen fuer die Hochtemperaturtechnik

Energy Technology Data Exchange (ETDEWEB)

Meier, N. [Krombach Armaturen, Kreuztal (Germany)

2000-03-01

Over many years, zero-leakage butterfly valves have eminently proven their capabilities in a large range of elevated-temperature and elevated-pressure processes. This article examines the basic design differences between various butterfly valves. These differences are, among other factors, important indicators of the suitability of the various valve types for their use in industry. (orig.) [German] Dichtschliessende Absperrklappen haben sich ueber Jahre in vielen Prozessen, die unter hoeherem Druck und hoeherer Temperatur ablaufen, bestens bewaehrt. Der Beitrag zeigt die grundsaetzlichen konstruktiven Unterschiede dichtschliessender Absperrklappen. Diese Unterschiede sind unter anderem Indikatoren fuer die Prozesstauglichkeit von Absperrklappen in der Industrie. (orig.)

Modular and reconfigurable common PCB-platform of FPGA based LLRF control system for TESLA test facility

Energy Technology Data Exchange (ETDEWEB)

Pozniak, K.T.; Romaniuk, R.S. [Institute of Electronic Systems, Warsaw (Poland); Kierzkowski, K. [Institute of Experimental Physics, Warsaw (Poland)

2005-07-01

The paper includes a description of predicted functionalities to be implemented in a universal motherboard (MB) for the next generation of LLRF control system for TESLA. The motherboard bases on a number of quasi-autonomous embedded executive modules. The modules are implemented in a few FPGA chips featured by the MB. The paper presents a practical design of the MB. The initial (basic) solution of the MB has the Cyclone as the chip where the board management is embedded. The board features communication modules - VME and micro, single chip PC with Ethernet. The board provides power supply for the FPGA chips. The board has fast internal communication between particular modules. (orig.)

Modular and reconfigurable common PCB-platform of FPGA based LLRF control system for TESLA test facility

International Nuclear Information System (INIS)

Pozniak, K.T.; Romaniuk, R.S.; Kierzkowski, K.

2005-01-01

The paper includes a description of predicted functionalities to be implemented in a universal motherboard (MB) for the next generation of LLRF control system for TESLA. The motherboard bases on a number of quasi-autonomous embedded executive modules. The modules are implemented in a few FPGA chips featured by the MB. The paper presents a practical design of the MB. The initial (basic) solution of the MB has the Cyclone as the chip where the board management is embedded. The board features communication modules - VME and micro, single chip PC with Ethernet. The board provides power supply for the FPGA chips. The board has fast internal communication between particular modules. (orig.)

Multifunctional outer wall systems; Multifunktionale Aussenwandsysteme

Energy Technology Data Exchange (ETDEWEB)

Hahne, E.; Twerdy, C. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany); Pfluger, R. [Stuttgart Univ. (Germany). Inst. fuer Thermodynamik und Waermetechnik

1998-02-01

Facades will have a multitude of functions in the future. All of them will be energy-oriented and overall energy balances considering production, utilization and destruction will become an important factor. For a detached house and multiple dwelling, examples of facade constructions and appliances are discussed. A `Solar Wall` facade provides preheating of combustion air in a combined heating/power station. Progressive facade elements are being investigated in so-called `Test Cells` for determining their heat transfer coefficient (k), their heat capacity (C) and their energy transport factor (g). PV modules are investigated in such cells in order to work out European Rules for the testing of PV-hybrid components. (orig.) [Deutsch] Fassaden werden in Zukunft eine Vielzahl von Funktionen zu erfuellen haben. Alle werden letztlich energieorientiert sein; gesamtheitliche Betrachtungen von der Produktion ueber die Nutzung bis zur Entsorgung werden eine wesentliche Rolle spielen. Fuer ein Ein- und Mehrfamilienhaus werden Beispiele fuer die Fassadenkonstruktion und Geraetschaften angefuehrt. In einem Fernheizkraftwerk dient eine `Solarwand` zur Vorwaermung der Verbrennungsluft. Fortschrittliche Fassaden-Elemente werden in sogenannten Testzellen untersucht hinsichtlich ihres Gesamtwaermedurchgangskoeffizienten, ihrer Waermekapazitaet und ihres Gesamtenergie-Durchlassgrads. PV-Module werden gegenwaertig in diesen Zellen untersucht, um Testregeln fuer PV-Hybridkomponenten fuer die Europaeische Union auszuarbeiten. (orig.)

Incongruent genetic connectivity patterns for VME indicator taxa: implications for the management of New Zealand's vulnerable marine ecosystems

Science.gov (United States)

Clark, M. R.; Gardner, J.; Holland, L.; Zeng, C.; Hamilton, J. S.; Rowden, A. A.

2016-02-01

In the New Zealand region vulnerable marine ecosystems (VMEs) are at risk from commercial fishing activity and future seabed mining. Understanding connectivity among VMEs is important for the design of effective spatial management strategies, i.e. a network of protected areas. To date however, genetic connectivity in the New Zealand region has rarely been documented. As part of a project developing habitat suitability models and spatial management options for VMEs we used DNA sequence data and microsatellite genotyping to assess genetic connectivity for a range of VME indicator taxa, including the coral Desmophyllum dianthus, and the sponges Poecilastra laminaris and Penares palmatoclada. Overall, patterns of connectivity were inconsistent amonst taxa. Nonetheless, genetic data from each taxon were relevant to inform management at a variety of spatial scales. D. dianthus populations in the Kermadec volcanic arc and the Louisville Seamount Chain were indistinguishable, highlighting the importance of considering source-sink dynamics between populations beyond the EEZ in conservation planning. Poecilastra laminaris populations showed significant divergence across the Chatham Rise, in contrast to P. palmatoclada, which had a uniform haplotypic distribution. However, both sponge species exhibited the highest genetic diversity on the Chatham Rise, suggesting that this area is a genetic hotspot. The spatial heterogeneity of genetic patterns of structure suggest that inclusion of several taxa is necessary to facilitate understanding of regional connectivity patterns, variation in which may be attributed to alternate life history strategies, local hydrodynamic regimes, or in some cases, suboptimal sample sizes. Our findings provide important information for use by environmental managers, including summary maps of genetic diversity and barriers to gene flow, which will be used in spatial management decision-support tools.

Environmental protection by cost minimization: Least Cost Planning for traffic. Includes a guide for the application in local communities; Umweltentlastung durch Kostenminimierung: Least Cost Planning im Verkehr. Mit Leitfaden fuer die Anwendung in Kommunen

Energy Technology Data Exchange (ETDEWEB)

Bracher, T.; Diegmann, V.; Eckart, C.F.; Liwicki, M.; Lobenberg, G.; Wetzel, C. [Gesellschaft fuer Informatik, Verkehrs- und Umweltplanung mbH (IVU), Berlin (Germany); Bergmann, M.; Uricher, A.; Lueers, A. [Oeko-Institut, Inst. fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany); Becker, U.; Karl, G.; Karl, B.; Voellings, A. [Technische Univ. Dresden (Germany). Lehrstuhl fuer Verkehrsoekologie

1999-08-01

An intermodal approach for the evaluation of transportation services on the municipal level was developed. Both non-motorised and motorised transportation were included. The approach aims at helping communities to provide an economically and ecologically viable transport policy. Least Cost Transportation Planning (LCTP) was developed to transfer the successful concept of Least Cost Planning from the energy sector to transportation. The conclusion from an analysis of LCTP literature and present evaluation methods was that an improved approach should be intermodal and integrate users, public bodies and transport companies as well as all planning sectors. An approach was developed firstly to identify and clarify transportation expenditures and incomes of a city within a year, and secondly for the evaluation of planning alternatives. This was illustrated for the access system of an industrial area with adjacent railway services in the town of Freiburg. Three alternatives were compared: the extension of a tramway line, the upgrading of the present bus system, and the development of a service and bicycle provision concept for rail stations and companies. Besides income and expenditure for each alternative, the effects on transport demand, the impact on air pollution and noise and on space consumption were presented. As a result, the bicycle concept is in most items better than its alternatives. The final report has three volumes and there is an extra guideline for implementing the method within municipalities. It includes a set of excel sheet tables for an easy application (all in German). (orig.) [German] Fuer die Verkehrsplanung wurde ein verkehrstraegeruebergreifendes Bewertungsverfahren fuer Kommunen entwickelt, das motorisierte und nicht motorisierte Verkehrstraeger einbezieht. Das Verfahren soll Gemeinden unterstuetzen, eine oekonomische und oekologisch vertraegliche Verkehrspolitik zu verfolgen. Least Cost Transportation Planning (LCTP) zielt darauf ab, das fuer

Control, Test and Monitoring Software Framework for the ATLAS Level-1 Calorimeter Trigger

CERN Document Server

Achenbach, R; Aharrouche, M; Andrei, V; Åsman, B; Barnett, B M; Bauss, B; Bendel, M; Bohm, C; Booth, J R A; Bracinik, J; Brawn, I P; Charlton, D G; Childers, J T; Collins, N J; Curtis, C J; Davis, A O; Eckweiler, S; Eisenhandler, E F; Faulkner, P J W; Fleckner, J; Föhlisch, F; Gee, C N P; Gillman, A R; Goringer, C; Groll, M; Hadley, D R; Hanke, P; Hellman, S; Hidvegi, A; Hillier, S J; Johansen, M; Kluge, E E; Kühl, T; Landon, M; Lendermann, V; Lilley, J N; Mahboubi, K; Mahout, G; Meier, K; Middleton, R P; Moa, T; Morris, J D; Müller, F; Neusiedl, A; Ohm, C; Oltmann, B; Perera, V J O; Prieur, D P F; Qian, W; Rieke, S; Rühr, F; Sankey, D P C; Schäfer, U; Schmitt, K; Schultz-Coulon, H C; Silverstein, S; Sjölin, J; Staley, R J; Stamen, R; Stockton, M C; Tan, C L A; Tapprogge, S; Thomas, J P; Thompson, P D; Watkins, P M; Watson, A; Weber, P; Wessels, M; Wildt, M

2008-01-01

The ATLAS first-level calorimeter trigger is a hardware-based system designed to identify high-pT jets, electron/photon and tau candidates and to measure total and missing ET in the ATLAS calorimeters. The complete trigger system consists of over 300 customdesignedVME modules of varying complexity. These modules are based around FPGAs or ASICs with many configurable parameters, both to initialize the system with correct calibrations and timings and to allow flexibility in the trigger algorithms. The control, testing and monitoring of these modules requires a comprehensive, but well-designed and modular, software framework, which we will describe in this paper.

Survey of legislation applicable in Germany for implementation of the EC Directive on environmental audits; Ueberblick ueber die in Deutschland fuer die Ausfuehrung der EG-Umwelt-Audit-Verordnung geltenden Rechtsvorschriften

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The brochure presents a comprehensive survey of the relevant legislation applicable in Germany to implementation of the EC Directive on environmental auditing. Readers interested in performing such auditing at one glance will find in this compiulation all relevant laws and regulations in full text that are to be observed for implementation of this novel environmental auditing instrument. (orig./RHM) [Deutsch] Diese Broschuere vermittelt einen umfassenden Ueberblick ueber die in Deutschland fuer die Ausfuehrung der EG-Umwelt-Audit-Verordnung geltenden Rechtsvorschriften. Damit wird fuer alle Interessenten ein rascher Zugriff auf die Rechtstexte, die zur praktischen Anwendung des neuartigen Umwelt-Audit-Instruments notwendig sind, ermoeglicht. (orig./RHM)

Infrared camera - specially developed for professional building inspection - with dew point detection tracing out fungi formation; Infrarotkamera - speziell entwickelt fuer die professionelle Gebaeudeinspektion - mit Taupunktermittlungsfunktion zum schnellen Auffinden von Gefahrbereichen fuer Schimmelbildung

Energy Technology Data Exchange (ETDEWEB)

Anon.

2004-07-01

Besides the positive effect of energy saving the aspect of fungi formation has also to be respected. Fungi is not only responseable for health diseases but can also damage building materials. Examples are shown and how they can be detect by an infrared monitoring camera. (GL) [German] Die Waermeschutzverordnung und das daraus hervorgegangene Energieeinspargesetz haben weitreichende Folgen fuer Architekten, Bauingenieure, Instandhalter und Sanierer: Zeitgemaesse Gebaeude werden immer dichter, Luftzirkulation und damit der Feuchtigkeitsaustausch werden weitgehend unterbunden. Neben dem positiven Effekt der Energieersparnis ergibt sich dadurch leider oft auch ein Problem durch Schimmelbildung. Dabei ist zu bedenken, dass Schimmelpilz nicht nur gesundheitsgefaehrend ist, sondern oft auch die Bausubstanz signifikant schaedigen kann. (orig.)

Chair of geotechnical processes at the Institute for geotechnics and mine surveying at Clausthal Technological University; Professur fuer Geotechnische Verfahren am Institut fuer Geotechnik und Marktscheidewesen der TU Clausthal

Energy Technology Data Exchange (ETDEWEB)

Meyer, N. [Technische Univ. Clausthal, Institut fuer Geotechnik und Marktscheidewesen (Germany)

2003-08-14

The Chair of Geotechnical Processes at the Institute for Geotechnics and Mine Surveying at Clausthal Technological University is concerned primarily with practical fundamental research in addition to teaching, in which comprehensive theoretical and practical experience from all areas of geotechnics is imparted. (orig.) [German] Der Lehrstuhl Geotechnische Verfahren am Institut fuer Geotechnik und Markscheidewesen der TU Clausthal befasst sich neben der Lehre, in der umfangreiche theoretische und praktische Erfahrungen aus allen Bereichen der Geotechnik vermittelt werden, in erster Linie mit der praxisnahen Grundlagenforschung. Die bearbeiteten Problemstellungen liegen bei der Bauwerk-Baugrund-Interaktion, Stabilitaetsproblemen bei Unterwasserboeschungen, der Umweltgeotechnik, der Geomesstechnik und dem Einsatz von Geokunststoffen in der Geotechnik und dem Bergbau. Die Forschungsvorhaben werden in enger Kooperation mit der Industrie durchgefuehrt. (orig.)

Camac Software for TJ-I and TJ-IU

International Nuclear Information System (INIS)

Milligen, B. Ph. van.

1994-01-01

A user-friendly software package for control of CAMAC data acquisition modules for the TJ-I and TJ-IU experiments at the Association CIEMAT para Fusion has been developed. The CAMAC control software operates in Synchronization with the pre-existing VME-based data-acquisition system. The control software controls the setup of the CAMAC modules and manages the data flow from the taking to the storage of data. Data file management is performed largely automatically. Further, user software is provided for viewing and analysing the data

Product marketing for eco-power; Produktemarketing fuer Oekostrom

Energy Technology Data Exchange (ETDEWEB)

Huber, D. [Verband Schweizerischer Elektrizitaetswerke, Zuerich (Switzerland)

1998-10-30

The company NaturEnergie (natural energy), a subsidiary of the Energieversorger Kraftwerk Laufenburg AG (KWL) is located in Grenzach-Whylen (Germany) near Basel (Switzerland) has been selling power generated from sun and water since the 1st of October 1998. The company employes a cleverly designed, emotional marketing strategy in order to position the brand ``NaturEnergie`` as a label for ``green power`` on the market. Bulletin VSE talked to Dr. Kai-Hendrik Schlusche (40), co-founder and member of the board of NaturEnergie AG about marketing and pricing of ``green`` power and about relations with Switzerland.(orig.) [Deutsch] Im grenznahen Grenzach-Whylen bei Basel verkauft die Firma NaturEnergie, eine Tochtergesellschaft der Energieversorger Kraftwerk Laufenburg AG (KWL) und Kraftuebertragungswerke Rheinfelden AG (KWR), seit 1. Oktober 1998 Oekostrom aus Sonne und Wasser. Mit Hilfe einer ausgekluegelten emotionellen Marketingstrategie will das junge Unternehmen die Marke `NaturEnergie` als Label fuer `gruenen Strom` im Markt positionieren. Bulletin VSE sprach mit Dr. Kai-Hendrik Schlusche (40), seit Mai 1998 Gruendungsvorstand der NaturEnergie AG, ueber Marketing, Preisgestaltung von `gruenem Strom` und die Beziehungen zur Schweiz. (orig.)

Market research and marketing for the mobility; Marktforschung und Marketing fuer die Mobilitaet

Energy Technology Data Exchange (ETDEWEB)

Meinig, W. [Bamberg Univ. (Germany)

1994-12-31

The explanations, which have been given in the talk are supposed to reveal, that the aim of the marketing for electric-powered vehicles is not to carry the idea of environmental protection into the society. It is far more important to use the power of the present environmental consciousness in order to guarantee the consumers demands for mobility, taking into consideration the ecological interests. (orig.) [Deutsch] Die vorstehenden Ausfuehrungen sollten insbesondere deutlich machen, dass das Ziel eines Marketing fuer E-Mobile nicht darin bestehen kann, den Umweltschutzgedanken in die Gesellschaft zu tragen. Vielmehr geht es darum, die Schubkraft vorhandenen Umweltbewusstseins dafuer zu nutzen, Mobilitaetsbeduerfnisse von Konsumenten unter Bewahrung oekologischer Interessen sicherzustellen. (orig.)

Ethical codes. Fig leaf argument, ballast or cultural element for radiation protection?; Ethik-Codes. Feigenblatt, Ballast oder Kulturelement fuer den Strahlenschutz?

Energy Technology Data Exchange (ETDEWEB)

Gellermann, Rainer [Nuclear Control and Consulting GmbH, Braunschweig (Germany)

2014-07-01

The international association for radiation protection (IRPA) adopted in May 2004 a Code of Ethics in order to allow their members to hold an adequate professional level of ethical line of action. Based on this code of ethics the professional body of radiation protection (Fachverband fuer Strahlenschutz) has developed its own ethical code and adopted in 2005.

Pyroelectric detectors with integrated operational amplifier for high modulation frequencies; Pyroelektrische Detektoren mit integriertem Operationsverstaerker fuer hohe Modulationsfrequenzen

Energy Technology Data Exchange (ETDEWEB)

Neumann, N.; Saenze, H.; Heinze, M. [InfraTec GmbH Dresden (Germany)

2006-02-01

In order to use the advantages of the current mode operation a pyroelectric detector family with integrated transimpedance amplifier (TIA) was developed particularly for modulation frequencies up to the kHz range with a simplified external circuitry for new application fields, e.g. absorption spectroscopy using quantum-cascade-laser. The essential advantages of the TIA arise from the small electrical time constant {tau}{sub E} and the short-circuiting of the pyroelectric element. A flat amplitude response up to some kHz was aimed at for a sufficiently high response of 7500 V/W, appr., also at high modulation frequencies. This can be achieved through a electrical time constant of 1 ms or less and a wide bandwidth of the op amp. The article describes in detail how these demands were accomplished and which compromises had to be accepted. (orig.)

Data warehouse solution for energy management tasks of a power generation corporation in a competitive market; Data-Warehouse-Loesung fuer die Energiemanagementaufgaben eines Stromerzeugungsbereiches in einem wettbewerblichen Umfeld

Energy Technology Data Exchange (ETDEWEB)

Brugger, H. [Siemens AG, Vienna (Austria). Bereich Energieuebertragung und -verteilung; Nobach, U. [Siemens AG, Nuernberg (Germany). Bereich Energieuebertragung und -verteilung; Hoenes, R.; Vetter, T. [Neckarwerke Stuttgart AG (Germany)

1999-04-19

Liberalization of the energy market gives new requirements to the organization of the departments of utilities and their IT-solutions. The authors explain by using the example of the new energy management system for Neckarwerke Stuttgart AG, how a modern Data Warehouse-platform is created for the operative and economic tasks for electricity supply and district heating in a competitive market. (orig.) [Deutsch] Aufgrund der Liberalisierung des Strommarktes erwachsen bei den Energieversorgungsunternehmen neue Anforderungen an die Organisation der Geschaeftsbereiche und an die EDV-Hilfsmittel. Die Verfasser erlaeutern am Beispiel des neuen Energiemanagementsystems fuer die Neckarwerke Stuttgart AG wie mit einem modernen Data Warehouse die Plattform fuer die Loesung der operativen und der wirtschaftlichen Aufgaben der Strom- und Fernwaermebeschaffung in einem Wettbewerbsumfeld geschaffen werden kann. (orig.)

Electric heat pump for motor vehicles with R744 (CO{sub 2}) as refrigerant; Elektrisch betriebene Waermepumpe fuer Fahrzeuge mit dem Kaeltemittel R744 (CO{sub 2})

Energy Technology Data Exchange (ETDEWEB)

Huenemoerder, W.; Kakehashi, N. [DENSO Automotive Deutschland GmbH, Eching (Germany)

2003-07-01

R744 (carbon dioxide) is suited for low ambient temperatures. A motor car air conditioner on this basis was developed for engines with low heat emissions. The passenger compartment is heated and cooled by a single system comprising a semihermetic electric compressor and three air-filled heat transfer units, i.e. an evaporator and a gas cooler for heating inside the car and a heat exchanger on the outside which can serve as evaporator or gas cooler as desired. The system can be operated in four modes: Heating without dehumidification, heating and dehumidification, cooling, thawing of the external heat exchanger. In contrast to conventional systems, the heating and cooling mode are not independent of each other, so a special control concept was developed which enables automatic operation of the four above modes of operation. The system is used in the Toyota FCHV fuel cell car. (orig.) [German] Das Kaeltemittel CO{sub 2} (R744) kann auch bei niederen Umgebungstemperaturen fuer Waermepumpenanwendungen eingesetzt werden. Eine CO{sub 2}-Klimaanlage mit Waermepumpe wurde fuer die Klimatisierung (Heizen, Kuehlen und Entfeuchten) des Fahrzeuginnenraumes entwickelt. Diese Anlage ist fuer Elektro- und Breenstoffzellenfahrzeuge geeignet, bei denen keine Motorabwaerme zu Heizzwecken zur Verfuegung steht. Heizen und Kuehlen des Innenraumes erfolgt durch ein einziges System unter Verwendung derselben Komponenten. Die Anlage besteht aus einem halbhermetischen elektrischen Verdichter und drei luftbeaufschlagten Waermeuebertragern - ein Verdampfer und ein Gaskuehler (zum Heizen) im Innenraum und ein Waermeuebertrager aussen, der - je nach Betriebsart - als Verdampfer oder Gaskuehler betrieben wird. Die Anlage kann in vier Betriebsarten betrieben werden: Heizen ohne Entfeuchtung, Heizen mit Entfeuchtung, Kuehlen, Abtauen des aeusseren Waermeuebertragers. In konventionellen Systemen koennen Heiz- und Kuehlsystem unabhaengig voneinander geregelt werden. Bei dem hier vorgestellten

Introductory strategies for the automation of suburban railway systems; Einfuehrungsstrategien fuer die Automatisierung von Nahverkehrsbahnen

Energy Technology Data Exchange (ETDEWEB)

Ritter, N. [Siemens Transportation Systems, Berlin (Germany)

2001-04-01

Driverless automatic operation is a cost-effective and passenger-friendly form of handling services in suburban railway systems. It is intended to introduce this operating mode also in railway systems that have so far been operated in a conventional mode. The article outlines solution concepts and introductory strategies for changing the operating mode. (orig.) [German] Der fahrerlose automatische Betrieb stellt eine wirtschaftliche und fahrgastfreundliche Form der Betriebsabwicklung von Nahverkehrssystemen dar. Ziel ist es, diese Betriebsform auch bei bislang konventionell betriebenen Bahnen einzufuehren. Der vorliegende Beitrag zeigt Loesungsansaetze und Einfuehrungsstrategien fuer die Umstellung auf einen automatischen Betrieb. (orig.)

Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 3. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

Energy Technology Data Exchange (ETDEWEB)

Stan, Cornel [California Univ., Berkeley, CA (United States); Paris-1 Univ., 75 (France); Pisa Univ. (Italy); Perugia Univ. (Italy); Kronstadt Univ. (Russian Federation)

2012-07-01

vorgesehener Energietraeger, die technische Komplexitaet, Kosten, Sicherheit, Infrastruktur und Service bestimmen die Randbedingungen fuer die Einfuehrung alternativer Antriebe fuer Automobile. Die aktualisierte Uebersicht und Analyse der Prozesse, Antriebsmaschinen und Energietraeger, die in komplexen Energie-Management-Systemen fuer Automobile kombinierbar sind, bilden den Inhalt dieses Buches.

Particle Reduction Strategies - PAREST. Prognosis of air quality and assessment of limit value exceedances in Germany for the reference years 2010, 2015 and 2020; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Prognose der Luftqualitaet und Abschaetzung von Grenzwertueberschreitungen in Deutschland fuer die Referenzjahre 2010, 2015 und 2020. Teilbericht

Energy Technology Data Exchange (ETDEWEB)

Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

2013-06-15

With the help of a data assimilation technique (optimal interpolation) a comprehensive forecast of O{sub 3}, PM10 and NO{sub 2} air quality in Germany for the years 2010, 2015 and 2020 was prepared. Based on these results, an assessment was made whether the limits of the European Air Quality Directive (2008/50/EC) can be observed in 2015 and 2020. [German] In diesem Bericht wurde mit Hilfe einer Datenassimilationstechnik (Optimale Interpolation) eine flaechendeckende Prognose der O{sub 3}-, PM10- und NO{sub 2}-Luftqualitaet in Deutschland fuer die Jahre 2010, 2015 und 2020 erstellt. Auf Basis dieser Ergebnisse wurde eine Abschaetzung vorgenommen, ob die Grenzwerte der europaeischen Luftqualitaetsrichtlinie (2008/50/EG) im Jahre 2015 und 2020 eingehalten werden koennen. Weiterhin wurde untersucht, was die in der Luftqualitaetsrichtlinie festgelegten Regelungen fuer die Feinstaeube PM2.5 fuer die PM2.5-Belastung in Deutschland bedeuten und ob das nationale Ziel fuer die Reduktion der PM2.5-Belastung unter den Emissionsbedingungen des Jahres 2020 erreicht werden kann.

1st Kassel user forum: Double-layer capacitors for high-performance applications. Proceedings '99; 1. Kasseler Anwenderforum: Doppelschichtkondensatoren fuer hohe Leistung. Tagungsband '99

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

Double-layer capacitors ('Super Caps') have excellent perspectives as dynamic short-term stores. They have a long life of more than 200000 cycles, immunity against full discharge, and are maintenance-free. Apart from their high short-term power density, they also have an extremely high energy density which recommends them for many applications. Currently, motor car engineering, autonomous networks, power quality and solar applications are investigated. [German] Doppelschichtkondensatoren oder 'Super-Caps' sind Speicher fuer elektrische Energie und weisen, dank ihrer Eigenschaften, hervorragende Perspektiven als dynamische Kurzzeitspeicher auf. Sie besitzen eine hohe Lebenserwartung von mehr als 200000 Zyklen, Immunitaet gegen vollstaendige Entladung und Wartungsfreiheit. Neben einer hohen Leistungsdichte im Kurzzeitbereich verfuegen sie ueber eine fuer Kondensatoren extrem hohe Energiedichte. Zahlreiche Einsatzgebiete koennen auf diese Weise erschlossen werden. Derzeit stehen die Bereiche Automobiltechnik, autarke Netze, Power Quality und solare Applikationen im Vordergrund. (orig.)

The Advanced Photon Source injection timing system

International Nuclear Information System (INIS)

Lenkszus, F.R.; Laird, R.

1995-01-01

The Advanced Photon Source consists of five accelerators. The injection timing system provides the signals required to cause a bunch emitted from the electron gun to navigate through intermediate accelerators to a specific bucket (1 out of 1296) within the storage ring. Two linacs and a positron accumulator ring operate at 60Hz while a booster synchrotron ramps and injects into the storage ring at 2Hz. The distributed, modular VME/VXI-based injection timing system is controlled by two EPICS-based input/output controllers (IOCs). Over 40 VME/VXI cards have been developed to implement the system. Card types range from 352MHz VXI timing modules to VME-based fiber optic fanouts and logic translators/drivers. All timing is distributed with fiber optics. Timing references are derived directly from machine low-level rf of 9.77MHz and 352MHz. The timing references provide triggers to programmable delay generators. Three grades of timing are provided. Precision timing is derived from commercial digital delay generators, intermediate precision timing is obtained from VXI 8-channel digital delay generators which provide timing with 25ns peak-to-peak jitter, and modest precision timing is provided by the APS event system. The timing system is fully integrated into the APS EPICS-based control system

Natural and anthropogenic environmental hazards. Research results of the Department of Applied Geology; Natuerliche und anthropogene Umweltgefaehrdungen. Forschungsergebnisse aus dem Lehrstuhl fuer Angewandte Geologie

Energy Technology Data Exchange (ETDEWEB)

Czurda, K.; Eiswirth, M.; Hoetzl, H. [comps.

1998-12-31

Applied geology is employed in mining geology, raw materials geology, engineering geology, and hydrogeology, of which the two last-mentioned are the most important for the Department of Applied Geology. This series of publications arose from the need of making research findings, dissertations, theses and conference papers accessible to the public faster and more comprehensively than in national and international journals. [Deutsch] Die Aufgaben der angewandten Geologie sind im weitesten Sinne in der Montangeologie, in der Rohstoffgeologie, in der Ingenieurgeologie und in der Hydrogeologie zu sehen. Der engere Aufgabenbereich der Institute fuer Angewandte Geologie konzentriert sich der heutigen Fragestellung entsprechend meist auf die Ingenieurgeologie und Hydrogeologie. Wenn wir daraus noch die Umweltgeologie ableiten, so ist der Lehr- und Forschungsschwerpunkt auch des Karlsruher Lehrstuhles fuer Angewandte Geologie (AGK=Angewandte Geologie Karlsruhe) umrissen. Die vorliegende Schriftenreihe ist aus der Notwendigkeit entstanden, Forschungsergebnisse, Dissertationen und ausgewaehlte Diplomarbeiten sowie Beitraege einschlaegiger Tagungen in Karlsruhe rascher und u.U. umfangreicher als in internationalen oder nationalen Journalen moeglich zu publizieren. (orig.)

GEC Alsthom put their hopes on fuel cells: A large potential for PEM fuel cells; GEC Alsthom setzt auf Brennstoffzellen: Grosses Potential fuer PEMFC

Energy Technology Data Exchange (ETDEWEB)

Anon,

1998-07-01

Fuel cells are regarded as one of the high-tech products of great promise for future energy supplies. High hopes are pinned on the PEM technology: This low-temperature fuel cell is applicable to both mobile applications as well as stationary systems, i.e. from small-scale heating systems through to CHP systems of medium output. GEC Alsthom, who entered into a strategic alliance with Ballard, the market leader in fuel cell technology, are the first power plant manufacturers to commit themselves in the fuel cell market sector. (orig./CB) [Deutsch] Brennstoffzellen gelten als einer der Hoffnungstraeger der zukuenftigen Energieversorgung. Grosse Erwartungen werden dabei in die PEM-Technologie gesetzt: Diese Niedertemperatur-Brennstoffzelle eignet sich sowohl fuer mobile Anwendungen als auch fuer den stationaeren Einsatz - von kleinen Hausheizungsanlagen bis hin zu BHKW mittlerer Leistungklasse. Mit GEC Alsthom und seinem Engagement beim Marktfuehrer Ballard steigt nun erstmals ein grosser Energieanlagenhersteller verstaerkt in dieses Marktsegment ein. (orig.)

Multiple myoma: current recommendations for imaging; Multiples Myelom: Aktuelle Empfehlungen fuer die Bildgebung

Energy Technology Data Exchange (ETDEWEB)

Hillengass, J. [Medizinische Universitaetsklinik, Abteilung fuer Haematologie, Onkologie und Rheumatologie, Heidelberg (Germany); Deutsches Krebsforschungszentrum, Abteilung Radiologie E010, Heidelberg (Germany); Delorme, S. [Deutsches Krebsforschungszentrum, Abteilung Radiologie E010, Heidelberg (Germany)

2012-04-15

zur Erfassung umschriebener Knochendestruktionen, von Osteoporose oder Frakturen. Die Ganzkoerper-low-dose-CT und Ganzkoerper-MRT ermoeglichen eine Darstellung sowohl des mineralisierten Knochens als auch des Knochenmarks mit einer hoeheren Sensitivitaet, hoeherem Patientenkomfort und im Falle der MRT ohne Strahlenbelastung. Nach den Ergebnissen der Literatur sind Schnittbildverfahren dem Roentgenskelettstatus signifikant ueberlegen, wobei die Ganzkoerper-MRT fuer den Nachweis insbesondere eines diffusen Knochenmarkbefalls signifikant besser ist als die Ganzkoerper-CT. Praktisch jeder osteodestruktive Herd ist in der MRT sichtbar. Allerdings ist fuer die Beurteilung der Osteodestruktion selbst wiederum eine CT erforderlich. Die Sensitivitaeten von PET/CT und MRT sind vergleichbar. Wie bereits in einigen Zentren insbesondere in Deutschland umgesetzt, sollten bei Verfuegbarkeit das Ganzkoerper-MRT und das Ganzkoerper-CT den konventionellen Roentgenskelettstatus ersetzen. Bei Erstdiagnose bzw. Verdacht auf eine monoklonale Gammopathie unklarer Signifikanz (MGUS), ''smoldering multiple myeloma'' und symptomatisches multiples Myelom sollten sowohl eine Ganzkoerper-MRT als auch eine Ganzkoerper-CT durchgefuehrt werden. Bei asymptomatischem Myelom oder MGUS waere die Ganzkoerper-MRT bis zur Detektion des ersten umschriebenen Myelomherdes ausreichend. Beim symptomatischen Myelom mit Knochenlaesionen sollten in der Regel die Ganzkoerper-CT und fuer spezielle Fragestellungen die MRT eingesetzt werden. (orig.)

CAMAC Software for TJ-I and TJ-IU

Energy Technology Data Exchange (ETDEWEB)

Milligen, B Ph. van

1993-07-01

A user-friendly software package for control of CAMAC data acquisition modules for the TJ-I and TJ-IU experiments at the Asociacion CIEMAT para Fusion has been developed. The CAMAC control software operates in synchronisation with the pre-existing VME-based data acquisition system. The control software controls the setup of the CAMAC modules and manages the data flow from the lacking to the storage of data. Data file management is performed largely automatically. Further, user software is provided for viewing and analysing the data. (Author) 9 refs.

CAMAC Software for TJ-I and TJ-IU

International Nuclear Information System (INIS)

Milligen, B. Ph. van

1994-01-01

A user-friendly software package for control of CAMAC data acquisition modules for the TJ-I and TJ-IU experiments at the Asociacion CIEMAT para Fusion has been developed. The CAMAC control software operates in synchronisation with the pre-existing VME-based data acquisition system. The control software controls the setup of the CAMAC modules and manages the data flow from the lacking to the storage of data. Data file management is performed largely automatically. Further, user software is provided for viewing and analysing the data. (Author) 9 refs

Materials colloquium `96: Thermal insulation coatings. Thermally insulating coating systems for heavy-duty structural components in aerospace engineering and energy engineering; Werkstoff-Kolloquium `96: Waermedaemmschichten. Waermeisolierende Schichtsysteme fuer hoechstbelastete Strukturbauteile in der Luft- und Raumfahrt sowie der Energietechnik

Energy Technology Data Exchange (ETDEWEB)

Peters, M.; Schulz, U.; Leushake, U.; Kaysser, W.A. [eds.

1996-12-31

The 15 contributions in this colloquium report document the current state of research and development in Germany in the field of thermally insulating layer structures for heavy-duty components like gas turbines. Five papers have been recorded separately in the ENERGY database. [Deutsch] Die 15 Beitraege in diesem Kolloquiumband dokumentieren den aktuellen Stand der Forschungs- und Entwicklungsarbeiten in Deutschland auf dem Gebiet der waermeisolierenden Schichtsysteme fuer hoechstbelastete Bauteile wie z.B. Gasturbinen. Fuer die Datenbank ENERGY wurden fuenf Artikel separat aufgenommen.

Signal processing and general purpose data acquisition system for on-line tomographic measurements

Science.gov (United States)

Murari, A.; Martin, P.; Hemming, O.; Manduchi, G.; Marrelli, L.; Taliercio, C.; Hoffmann, A.

1997-01-01

New analog signal conditioning electronics and data acquisition systems have been developed for the soft x-ray and bolometric tomography diagnostic in the reverse field pinch experiment (RFX). For the soft x-ray detectors the analog signal processing includes a fully differential current to voltage conversion, with up to a 200 kHz bandwidth. For the bolometers, a 50 kHz carrier frequency amplifier allows a maximum bandwidth of 10 kHz. In both cases the analog signals are digitized with a 1 MHz sampling rate close to the diagnostic and are transmitted via a transparent asynchronous xmitter/receiver interface (TAXI) link to purpose built Versa Module Europa (VME) modules which perform data acquisition. A software library has been developed for data preprocessing and tomographic reconstruction. It has been written in C language and is self-contained, i.e., no additional mathematical library is required. The package is therefore platform-free: in particular it can perform online analysis in a real-time application, such as continuous display and feedback, and is portable for long duration fusion or other physical experiments. Due to the modular organization of the library, new preprocessing and analysis modules can be easily integrated in the environment. This software is implemented in RFX over three different platforms: open VMS, digital Unix, and VME 68040 CPU.

The Fermilab D0 Master Clock System

International Nuclear Information System (INIS)

Rotolo, C.; Fachin, M.; Chappa, S.; Rauch, M.; Needles, C.; Dyer, A.

1991-11-01

The Clock System provides bunch crossing related timing signals to various detector subsystems. Accelerator synchronization and monitoring as well as timing signal generation and distribution are discussed. The system is built using three module types implemented in Eurostandard hardware with a VME communications interface. The first two types of modules are used to facilitate synchronization with the accelerator and to generate 23 timing signals that are programmable with one RF bucket (18.8 ns) resolution and 1 ns accuracy. Fifty-four of the third module type are used to distribute the timing signals and two synchronous 53 MHz and 106 MHz clocks to various detector subsystems. 6 refs., 5 figs

Identification of areas and time intervals for inservice inspections; Auswahl der Pruefbereiche und -intervalle fuer wiederkehrende Pruefungen

Energy Technology Data Exchange (ETDEWEB)

Metzner, K J [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Herter, K H [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Schoeckle, F [Amtec Messtechnischer Service, Lauffen (Germany)

1998-11-01

von Schadensmechanismen), koennen die wiederkehrenden Pruefungen vorwiegend zielgerichtet hinsichtlich der Folgen dieser moeglichen Schadensmechanismen eingesetzt werden. Ist keine oder nur eine eingeschraenkte Ueberwachung vorhanden, sind die moeglichen Folgen eventuell bisher unbekannter Schadensmechanismen durch erweiterte und ggf. vagabundierende WKP-Massnahmen zu ueberpruefen. Fuer die Auswahl von Pruefbereichen und die Festlegung von Pruefintervallen ist die Verwendung der Auslegungsanalysen, in denen konservativ spezifizierte Belastungen und Lastfallhaeufigkeiten (fuer Betriebs- und Stoerfaelle) beruecksichtigt wurden, nicht geeignet. Es ist vielmehr von den `Ist-Beanspruchungen` aus dem bisherigen Betrieb in Verbindung mit der Kenntnis ueber die vorhandene `Istqualitaet` aus der Herstellung und der bisherigen Betriebszeit auszugehen. Die vorhandenen Unterlagen sind entsprechend aufzubereiten, so dass eine Grundlage fuer die Neubewertung der bisherigen ZfP-Massnahmen gegeben ist. (orig./MM)

Environmental policy. 2000 environmental expert opinion of the Council of Experimental Experts; Umweltpolitik. Umweltgutachten 2000 des Rates von Sachverstaendigen fuer Umweltfragen. Schritte ins naechste Jahrtausend. Kurzfassung

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

The reorientation of energy policy is a key issue. The Council of Environmental Experts considers the further use of atomic energy to be irresponsible and recommends a new orientation. Recommendations are made on ecology-centered taxation. Critical comments are made in the context of conservation of nature, where many species of plants and animals still continue to be endangered. The conservation programme of the Federal government, which also comprises a system of large, interconnected biotopes on 10% of Germany's total surface, is approved, and the potential contribution of sustainable agricultural and forestry policy is discussed in a separate chapter. Further subjects discussed are recycling and waste management, protection of water and soil, air pollution abatement, health protection and genetic engineering. The environmental aspects of Eastern European states becoming EC members are gone into in particular. The network of Europen Environmental Councils, for which the German Council of Environmental Experts currently acts as a coordinator, makes intensive efforts to improve environmental counselling in these states. [German] Eines der Schwerpunktthemen des Umweltgutachtens ist die Neuordnung der Energiepolitik. Der Umweltrat haelt die weitere Nutzung der Atomenergie vor allem wegen der Risiken der Entsorgung nicht fuer verantwortbar. Er befuerwortet die Einleitung einer Energiewende. Zur oekologischen Steuerreform werden weiterfuehrende Empfehlungen unterbreitet. An vielen Stellen nimmt der Rat die Umweltpolitik auch kritisch unter die Lupe. Er weist auf den hohen Handlungsbedarf im Naturschutz hin. Eine dauerhafte Trendwende beim Grad der Gefaehrdung heimischer Tier- und Pflanzenarten sei in Deutschland noch nicht erreicht. Der Rat bestaetigt in diesem Zusammenhang die naturschutzpolitische Konzeption der Bundesregierung fuer einen Naturschutz auf der ganzen Flaeche, kombiniert mit einem grossflaechigen Biotopverbundsystem auf 10% der Landesflaeche. Der

The environmental and radionuclide laboratory at VKTA Rossendorf; Das Labor fuer Umwelt- und Radionuklidanalytik im VKTA Rossendorf

Energy Technology Data Exchange (ETDEWEB)

Koehler, M.; Knappik, R.; Gleisberg, B.; Schaefer, I.; Boden, W.; Bothe, M. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), Dresden (Germany)

2001-07-01

The VKTA provides environmental and radionuclide analyses for remediation and waste management tasks at the Rossendorf research site and for commercial clients as well. The analyses, the correlated valuations and calculations were used for the decommissioning of nuclear facilities, for the remediation of contaminated mining sites and for environmental investigations. The Laboratory for Environmental and Radionuclide Analytics is able to handle and analyse artificial and natural radionuclides in the range from 10{sup -3} Bq until 10{sup 9} Bq. Besides the used activity measurement techniques ({alpha}-particle and {gamma}-ray spectrometry, {beta}-counting), which were also applied after radiochemical separations, mass-spectrometry with inductively coupled plasma provides analytical results for long-lived radionuclides and isotopic ratios very effective. The capability of the laboratory is demonstrated by selected applications. (orig.) [German] Der VKTA fuehrt im Rahmen seiner Rueckbau- und Entsorgungsaufgaben am Forschungsstandort Rossendorf und fuer externe Auftraggeber Umwelt- und Radionuklidanalysen als komplexe Dienstleistung durch. Die Analysen und die damit in Zusammenhang stehenden Bewertungen und Modellrechnungen finden beim Rueckbau kerntechnischer Anlagen, bei der Sanierung von Uranbergbau-Altlasten und im Umweltbereich Verwendung. Im Labor fuer Umwelt- und Radionuklidanalytik werden Proben mit kuenstlichen und natuerlichen Radionukliden im typischen Aktivitaetsbereich von 10{sup -3} Bq bis 10{sup 9} Bq bearbeitet und analysiert. Neben den Aktivitaetsmessverfahren ({alpha}-, {beta}-, {gamma}-Spektrometrie), die auch nach radiochemischen Trennungen eingesetzt werden, kommen massenspektrometrische Verfahren bei der Analyse langlebiger Radionuklide bzw. Isotopenverhaeltnisse zum Einsatz. Das Leistungsspektrum des Labors wird durch ausgewaehlte Applikationen belegt. (orig.)

Vehicle based localization system for locomotives on the base of slip depending distance measurment; Fahrzeugautarkes Ortungssystem fuer Lokomotiven auf der Basis schlupfbehafteter Wegmessung

Energy Technology Data Exchange (ETDEWEB)

Scholz, C.

2003-07-01

effizienter zu nutzen und ihre Leistungen zu verbessern. Essentielle Voraussetzung fuer fast jede telematische Anwendung ist eine Fahrzeugortung. Der vermehrte Einsatz der Telematik bewirkt einen steigenden Bedarf an Ortungssystemen. Hohe Investitionen und zunehmender Kostendruck verhindern jedoch haeufig die Installation einer leistungsfaehigen Ortung. Im Rahmen der vorliegenden Arbeit wurde ein fahrzeugautarkes Ortungssystem fuer Lokomotiven entwickelt und erprobt. Das System arbeitet auf der Basis einer schlupfbehafteten Wegmessung an den Treibachsen, das den Schlupf in Abhaengigkeit der momentanen Zugkraft und Geschwindigkeit abschaetzt und korrigiert. Die Besonderheit dieses Systems ist, dass es im Wesentlichen mit der auf den Lokomotiven der Deutschen Bahn serienmaessig vorhandenen Infrastruktur auskommt. Das System koennte folglich schnell und kostenguenstig auf allen Fahrzeugen der Deutschen Bahn installiert werden. Das Ortungssystem wurde im Rahmen eines einjaehrigen Pilotbetriebs fuer die Steuerung der computergestuetzten Energiesparenden Fahrweise (ESF) der Deutschen Bahn getestet. Auf diese Weise konnte eine wesentliche Reduzierung des schlupfbedingten Wegmessfehlers im regulaeren Fahrplan-Betrieb experimentell nachgewiesen werden, so dass eine breite Nutzung fuer nicht-sicherheitsrelevante Anwendungen denkbar ist. Die schriftliche Ausarbeitung gibt einen Ueberblick ueber wichtige Begriffe und Aspekte der Ortung und der Kraftschluss-Schlupf-Charakteristik bei Schienenfahrzeugen. Es erfolgt die Beschreibung der Entwicklung und Erprobung des Ortungssystems. Die Auswertung der Messungen und die daraus resultierende Ortungsgenauigkeit des Systems zeigen die Eignung des Systems fuer eine betriebliche Ortung mittlerer Genauigkeit im Schienenverkehr. (orig.)

Electric Co'Co' bi-voltage locomotive class EG 3100 of DSB; Co'Co'-Zweifrequenzlokomotive EG 3100 fuer Danske Statsbaner

Energy Technology Data Exchange (ETDEWEB)

Pedersen, B.O. [DSB Materiel Technik, Copenhagen (Denmark); Joergensen, O.A. [Siemens AG, Erlangen (Germany). Abt. VT 62; Proell, J. [Siemens AG, Muenchen (Germany). Abt. VT 68

2000-12-01

DSB has purchased a series of heavy electric locomotives for hauling transit freight trains between Central Europe and Scandinavia. Demands, basic features and technical components are described in detail. (orig.) [German] Fuer den Transitgueterverkehr zwischen Mitteleuropa und Skandinavien hat Danske Statsbaner eine Serie schwerer elektrischer Lokomotiven beschafft. Die Anforderungen, das Grundkonzept und die technischen Komponenten werden ausfuehrlich beschrieben. (orig.)

Electric Co'Co' bi-voltage locomotive class EG 3100 of DSB; Co'Co'-Zweifrequenzlokomotive EG 3100 fuer Danske Statsbaner

Energy Technology Data Exchange (ETDEWEB)

Pedersen, B.O. [DSB Materiel Technik, Copenhagen (Denmark); Joergensen, O.A. [Siemens AG, Erlangen (Germany). Abt. VT 62; Proell, G. [Siemens AG, Muenchen (Germany). Abt. VT 68

2001-07-01

DSB has purchased a series of heavy electric locomotives for hauling transit freight trains between Central Europe and Scandinavia. Demands, basic features and technical components are described in detail. (orig.) [German] Fuer den Transitgueterverkehr zwischen Mitteleuropa und Skandinavien hat Danske Statsbaner eine Serie schwerer elektrischer Lokomotiven beschafft. Die Anforderungen, das Grundkonzept und die technischen Komponenten werden ausfuehrlich beschrieben. (orig.)

An improved data acquisition system at the Saskatchewan Accelerator Laboratory

International Nuclear Information System (INIS)

Norum, W.E.

1994-01-01

An improved data acquisition system has been in service at the Saskatchewan Accelerator Laboratory for the past 14 months. The system has shown itself to be reliable and easy to use having collected over 800 gigabytes of data for a number of experiments. The system is based on a VME front end computer acquiring data from CAMAC and FASTBUS modules and forwarding the data via an Ethernet connection to an acquisition workstation for archiving and on-line analysis. A multiprocessor real-time operating system in the front end computer makes increasing the performance of the system a simple matter of adding an additional processor to the VME chassis. Experimenters need only write a high-level description of their experiment which is transformed into a C program for the front end computer by a translation program. Special requirements are met by facilities for direct inclusion of user C or FORTRAN code

Slow Controls Using the Axiom M5235BCC

Science.gov (United States)

Hague, Tyler

2008-10-01

The Forward Vertex Detector group at PHENIX plans to adopt the Axiom M5235 Business Card Controller for use as slow controls. It is also being evaluated for slow controls on FermiLab e906. This controller features the Freescale MCF5235 microprocessor. It also has three parallel buses, these being the MCU port, BUS port, and enhanced Time Processing Unit (eTPU) port. The BUS port uses a chip select module with three external chip selects to communicate with peripherals. This will be used to communicate with and configure Field Programmable Gate Arrays (FPGAs). The controller also has an Ethernet port which can use several different protocols such as TCP and UDP. This will be used to transfer files with computers on a network. The M5235 Business Card Controller will be placed in a VME crate along with VME card and a Spartan-3 FPGA.

Amended EC Directive on the limitation of emissions of certain pollutants into the air from large combustion plants. Implications for German power plants; Neue EG-Richtlinie fuer Grossfeuerungsanlagen. Folgerungen fuer deutsche Kraftwerke

Energy Technology Data Exchange (ETDEWEB)

Hildebrand, M. [Verband der Elektrizitaetswirtschaft - VDEW - e.V., Frankfurt (Germany). Bereich Recht und Umwelt

2002-03-11

The article highlights the major improvements in terms of reducing emissions from large combustion plants, comparing the new limiting values and specifications with those of the former Directive. As Germany is obliged to transform the new EC Directive into national law within twelve months from its entry into force, an amendment of the respective German regulation can be expected soon. (orig./CB) [German] Mit der im Herbst 2001 durch das Europaeische Parlament und den Umweltministerrat verabschiedeten Novelle der Grossfeuerungsanlagen-Richtlinie hat die Europaeische Union einen markanten, laengst ueberfaelligen Schritt zur EU-weiten Angleichung der emissionsseitigen Anforderungen an grosse Feuerungsanlagen unternommen. Mit dem Inkrafttreten der novellierten Grossfeuerungsanlagen-Richtlinie wurde aber auch der formale Anstoss fuer eine Aktualisierung der deutschen Grossfeuerungsanlagen-Verordnung (13.BImSchV) gegeben. (orig./CB)

Transformation strategies for multi-utility companies; Transformationsstrategien fuer Multi Utility-Unternehmen

Energy Technology Data Exchange (ETDEWEB)

Apking, W.; Bosse, F.; Kroepelin, C.; Schaudinn, D.; Uhlmann, K. [PriceWaterhouseCoopers Unternehmensberatung GmbH, Hamburg (Germany)

2000-05-01

Energy supply companies (resellers) and electric utilities as traders in the liberalized markets increasingly focus their activities on their core businesses and offer their capabilites also in other branches of industry, thus achieving synergistic effects. The evolution of e-commerce in the energy supply sector in Germany is described in this article, and recommendations are given to companies as to suitable change management strategies for successful marketing and procurement via the world wide web, using IP technologies as a basis for transactions. (CB) [German] Energieversorgungsunternehmen (EVU) besinnen sich auf ihre Kernkompetenzen, bieten diese auch in anderen Branchen an und erzielen damit Synergieeffekte. Ein weiterer Aspekt ist die zunehmende Vernetzung der europaeischen Stromnetze. Die Konvergenz der Maerkte wird ferner durch den Einsatz von IP(Internet-Protokoll)-Technologien vorangetrieben, da das Internet eine Informations- und Transaktionsplattform fuer saemtliche Marktteilnehmer schafft. Welche diesbezueglichen Transformationsstrategien von den EVU bereits heute zu ergreifen sind, wird anschaulich aus einem hierzu entwickelten Modell abgeleitet. (orig./CB)

Interventional magnetic resonance imaging - non-invasive imaging for interventions; Interventionelle Magnetresonanztomographie - nichtinvasive Bildgebung fuer Interventionen

Energy Technology Data Exchange (ETDEWEB)

Buecker, A.; Adam, G.; Neuerburg, J.M.; Glowinski, A.; Tacke, J.; Guenther, R.W. [Technische Hochschule Aachen (Germany). Medizinische Fakultaet

2000-02-01

As a prerequisite for MR-guidance of interventional procedures, instruments have to be well depicted in the MR image without obscuring or distorting the underlying anatomy. For non-vascular interventions the imaging speed has to be in the range of seconds while control of vascular interventions requires real time imaging speed. The imaging contrast has to be maintained as well as a high spatial resolution. Furthermore, sufficient patient access has to be provided by the MR scanner. Neither an ideal magnet nor the optimal single sequence are available to fulfill the above-mentioned criteria. The type of sequence - gradient echo versus spin echo - together with changing of the echo time and phase encording direction will ensure an appropriate size of the artifact and thereby of the appearance of the instrument in the MR image. The feasibility of non-vascular MR-guided interventions has been proved at field strengths ranging from 0.064 T to 1.5 T. Bone biopsies, soft tissue biopsies, drainages, and control of interstitial thermo- and cryotherapy have been reported. For vascular interventions, different real time MR strategies are currently under investigation. The development of dedicated catheters and guide wires has enabled MR-guided dilatations, stenting, placement of vena cava filters, and TIPS procedures. Considering the fast progress being made in this field, there can be no question that interventional MRI will become a well-accepted clinical tool offering potential advantages such as excellent soft tissue contrast, multiplanar imaging, flow measurements, high resolution imaging of vessel walls, and lack of ionizing radiation. (orig.) [German] Zur Durchfuehrung MR-gesteuerter Interventionen muessen interventionelle Instrumente gut sichtbar, aber ohne stoerende Artefakte darstellbar sein. Die Geschwindigkeit der Bilderstellung sollte fuer nichtvaskulaere Interventionen im Sekundenbereich liegen und fuer vaskulaere Interventionen Echtzeitbildgebung liefern. Weder

Research parallel to 'Solarthermie 2000'. Development of a standardized acceptance test for industrial-scale solar thermal systems. Final report; Begleitforschung Solarthermie 2000. Entwicklung eines standardisierten Abnahmeverfahrens fuer solarthermische Grossanlagen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Beikircher, T.; Benz, N.; Gut, M.; Schwenk, C.; Schoelkopf, W.

2000-02-01

First, a simple and efficient tool for projecting solar thermal power systems was to be developed by ITW Stuttgart (see separate ITW Stuttgart report). Parallel to this, a fast and simple method was to be developed for in-situ assessment or the annual yield of such systems, with a maximum error of 5 percent. The following steps were taken: 1. Development of a measuring system for the task; 2. Selection of methods of evaluation for the dynamic in situ short-term test; 3. Development and testing of the method in several industrial-scale systems and validation by comparison with the results of conventional measurements. The dynamic in situ short-term test method developed on this basis consists of six steps which are described in the report. The measuring accuracy depends on the correct function of the plant. [German] Zunaechst sollte fuer solarthermische Grossanlagen ein Katalog standardisierter Anlagenkonfigurationen erstellt und anschliessend in die gaengigen Planungswerkzeuge TRNSYS und TSOL uebertragen werden, um Planern ein einfaches und leistungsfaehiges Werkzeug zur Auslegung und zur Berechnung des GSR zur Verfuegung zu stellen. Damit sollen Planungsfehler aufgrund fehlender Erfahrung mit Solaranlagen vermieden und ein Standard fuer innovative Anlagenkonzepte verbreitet werden. Dieser Arbeitspunkt wurde ausschliesslich durch das ITW Stuttgart bearbeitet, siehe separater Berichtsteil des ITW Stuttgart. Parallel dazu war ein Testverfahren zu entwickeln, mit dem der Jahresertrag grosser thermischer Solaranlagen in situ, d.h. an der installierten Anlage vor Ort, ohne Eingriff in die Anlage, um die Gewaehrleistungspflicht des Anlagenbauers zu erhalten, auf 5% genau, um ein klares juristisches Kriterium fuer die Feststellung einer etwaigen Nachbesserungspflicht des Erbauers zu haben, kostenguenstig und in kurzer Zeit (maximal 6 Wochen) bestimmt werden kann. Hierzu waren folgende Arbeiten notwendig: 1. Entwicklung einer an die Aufgabenstellung angepassten Messtechnik

Basic methodology of tomographic imaging by filtered inverse projection at a turbo-pump. Project report; Methodische Grundlagen fuer die Tomographie durch gefilterte Rueckprojektion an einer Axialpumpe. Projektbericht

Energy Technology Data Exchange (ETDEWEB)

Hoppe, D.

2000-11-01

A two-phase medium consisting of a fluid containing gas is transported in a turbo-pump via an impeller. The interaction between the gaseous phase and the impeller is to be examined by tomography with gamma rays. Reconstruction of the image of the object is to be made by way of filtered inverse projection. The methodology of using this principle in the given system (geometry and measuring conditions) is explained. (orig./CB) [German] Ein zweiphasiges, aus einer gashaltigen Fluessigkeit bestehendes Medium wird in einer Axialpumpe von einem propellerartigen Laufrad senkrecht zur Drehachse dieses Laufrades transportiert. Die Wechselwirkung zwischen der Gasphase und dem Laufrad soll unter Verwendung von Gamma-Strahlung mittels Tomographie untersucht werden. Dabei ist fuer die Rekonstruktion des Objektbildes das Prinzip der sogenannten gefilterten Rueckprojektion vorgesehen. Die methodischen Grundlagen fuer die Nutzung dieses Prinzips unter von vorgesehenen geometrischen und messtechnischen Bedingungen sind Gegenstand dieser Arbeit. (orig.)

Database for 'Environment 2000' environment presentation for EXPO 2000. Appendix 1 and 2: experimental data; Informationsgrundlage fuer das Umweltpraesentationssystem des BMU 'Umwelt 2000 im Rahmen des Teilvorhabens 2 des Globalansatzes Expo 2000'. Mit Anhang 1 und 2: 1. Katalog zur konsistenten Vorgehensweise bei der Erfassung von Rahmeninformationen in der Datenbank Grunddaten. 2. Datengrundlage fuer Umwelt Deutschland

Energy Technology Data Exchange (ETDEWEB)

Schoen, M.; Hillenbrand, T.; Kuntze, U.; Nathani, C.; Toussaint, D.; Behnke, L.; Michi, S.; Rauscher, J.; Ziesing, H.J.; Knoerr, W.; Tochtermann, K.; Dombeck, T.; Kadric, L.

2002-03-01

Goal of the study was to create a documentary system containing the relevant information available in the Federal Republic of Germany in order to provide a wide-scale presentation of the environmental situation. The theme catalogue which has been extended and modified in the course of the research work contains about 150 items. In order to obtain trend statements, a period of at least 10 years - between 1990 and 2000 - had to be evaluated. Since most of the available empirical time series do not go beyond 1998, projections based here on allowing a foresight on the medium-term developments in the subsequent two years or more were required. In two selected theme fields, scenarios until the year 2020 had to be developed: scenarios of emissions of greenhouse gases and precursors of greenhouse gases as well as for traffic development and environmental pollution caused by traffic. The basis for the documentary administration is the data bank 'DB Grunddaten' ('basic data'). This data bank was developed by the Federal Environmental Agency and had to be completed for the presentation system environment Germany. (orig.) [German] Fuer eine flaechendeckende Gesamtdarstellung des Umweltzustandes in Deutschland sollten die auf Bundesebene verfuegbaren Informationsbausteine in einem Dokumentationssystem bereitgestellt werden. Der im Lauf der Bearbeitung erweiterte und modifizierte Themenkatalog umfasste ca. 150 Positionen. Die Ordnung dieses Themenkataloges ist an den Pressure-State-Response-Ansatz angelehnt. Zur Ermoeglichung von Trendaussagen sollte dort, wo moeglich und sinnvoll, ein Darstellungszeitraum von mindestens zehn Jahren von 1990 bis 2000 gewaehlt werden. Da die verfuegbaren empirischen Zeitreihen meist nicht weiter als bis zum Jahr 1998 reichten, waren darauf aufbauende Projektionen der mittelfristigen Entwicklung ueber einen Zeitraum von zwei Jahren oder mehr erforderlich. In zwei ausgewaehlten Themenbereichen waren auch ueber das Jahr 2000

Campaigns for renewable energy - the evaluation of 'Solar-na klar.' and a framework concept for new campaigns; Kampagnen fuer erneuerbare Energien - Die Evaluation von 'Solar-na klar.' und Empfehlungen fuer neue Kampagnen

Energy Technology Data Exchange (ETDEWEB)

Duscha, M.; Schuele, R.; Gross, D.; Lambrecht, K.; Lucius, W.; Johansson, J.; Rieder, S.

2002-04-01

, localized relevant target groups and condensed recent image studies about renewable energies in Germany. As a result, the report details the main elements and conditions that are necessary for campaigns that cover all types of renewable energies, such campaigns are supported in principal by all stakeholder groups. (orig.) [German] (a) Die Kampagne 'Solar - na klar.' unterstuetzt seit 1999 eine verstaerkte Verbreitung von solarthermischen Anlagen durch vielfaeltige Oeffentlichkeitsarbeit und Dienstleistungen. Die Evaluation der Kampagne kam bezueglich der externen Wirkungen zu ueberwiegend positiven Ergebnissen: Die zentralen Zielgruppen, Handwerker und der Ein-/Zweifamilienhausbesitzer, wurden durch die Kampagne gut erreicht und mit gutem Informationsmaterial angesprochen. Darueber hinaus schaetzte ca. ein Viertel der Haushalte, die eine solarthermische Anlage installierten, den Einfluss der Kampagne eher hoch ein. Allerdings vermissten die Haushalte zum Teil weiterfuehrende Informationen. Auch die befragten Handwerker aeusserten eine relativ grosse Zufriedenheit mit der Kampagne. Sie nutzten die bereitgestellten Informationsmaterialien der Kampagne jedoch nur sehr selten. Die Evaluation der internen Grundlagen und Prozesse fuehrt zu ambivalenten Ergebnissen: Beispielsweise ist es der Kampagne auf der einen Seite gelungen, eine breite und heterogene Traegerschaft zu gewinnen und flexibel auf aeussere Anforderungen zu reagieren. Auf der anderen Seite stellten sich Probleme in der Steuerung und im Konfliktmanagement ein. Hierzu trugen u.a. eine nicht ausreichend integrierte Projektplanung sowie strukturelle Unterschiede zwischen den Partnern bei. Die Evaluation muendet in der zentralen Empfehlung, die Kampagne in modififizierter Form fortzusetzen. Verbesserungsmoeglichkeiten sehen die Evaluatoren u.a. in der verstaerkten Einbindung regionaler Aktvitaeten. (b) Als Grundlage fuer die Empfehlungen fuer weitere Kampagnen fuer erneuerbare Energien analysierte das ifeu

Integrated market research as a basis for target group oriented marketing; Integrierte Marktforschung als Basis fuer zielgruppenorientiertes Marketing

Energy Technology Data Exchange (ETDEWEB)

Welzel, D.; Meinecke, B. [Meinecke und Rosengarten GmbH, Hamburg (Germany)

2000-02-01

Deregulation of the energy markets may, in the long run, also involve free choice of gas suppliers. Marketing research offers methods for assessing the customers' needs and wishes and for controlling and improving the measures taken. [German] In Folge der Liberalisierung der Energiemaerkte wird es in absehbarer Zeit voraussichtlich auch fuer die Haushaltskunden im Gasbereich moeglich sein, den Versorger frei zu waehlen. Die Marktforschung bietet verschiedene Methoden an, mit deren Hilfe die Beduerfnisse der Kunden im Hinblick auf Kundenbindung aber auch -gewinnung ermittelt und die Wirksamkeit ergriffener Massnahmen kontrolliert und verbessert werden kann. (orig.)

Electrochemical storage systems for renewable power supply systems. Workshop; Elektrochemische Speichersysteme fuer regenerative Energieversorgungsanlagen. Workshop

Energy Technology Data Exchange (ETDEWEB)

Garche, J.; Hoehe, W. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Ulm (Germany); Stadermann, G. [eds.] [Forschungsverbund Sonnenenergie, Berlin (Germany)

1999-07-01

This volume contains 26 contributions on batteries and PV systems. Vol. 1 discusses the following subjects: 1. Evaluation and assessment of the performance of battery systems in existing PV systems; 2. Status and prospects of storage systems; 3. Experience, requirements and markets; 4. Storage battery operation and assessment; 5. Systems engineering and operation of PV systems. [German] Dieser Band enthaelt 26 Beitraege zum aktuellen Stand der Batterien sowie der dazugehoerigen Systeme fuer Photovoltaik-Anlagen. Der Band ist in fuenf Themenbereiche unterteilt: 1. Auswertung und Bewertung des Betriebsverhaltens von Batteriesystemen in bestehenden PV-Anlagen; 2. Stand und Zukunft von Speichersystemen; 3.Erfahrungen, Anforderungen und Maerkte; 4. Speicher-Betriebsfuehrung und -Zustandsbestimmung; und 5. Systemtechnik und Betriebsfuehrung von PV-Systemen.

Assessment of the safety factor of the new EC-specified test gas for intrinsically safe electric circuits of mining equipment; Ermittlung des Sicherheitsfaktors des neuen in der EG festgelegten Pruefgases fuer eigensichere Stromkreise von Bergbau-Betriebsmitteln

Energy Technology Data Exchange (ETDEWEB)

Hauke, R. [Fachstelle fuer Sicherheit Elektrischer Betriebsmittel, Dortmund (Germany). Bergbauversuchsstrecke

2001-07-01

The real safety factor of the new gas (52 % by volume H{sub '}'/air mixture) was compared to the earlier gas mixture (ethylene) for group I (methane) was investigated. Further, it was investigated whether more or less intrinsically safe systems can be connected to a single supply source. Extensive experiments were carried out in two test sites, supplemented by evaluations of earlier BVS experiments and a literature search. [German] Im Rahmen des Vorhabens sollte die Hoehe des realen Sicherheitsfaktors der neuen Wasserstoffmischung (52 Vol.-% H{sub 2}/Luft-Gemisch) im Vergleich zu der frueher verwandten Pruefgasmischung (Ethylen) fuer die Gruppe I (Methan) untersucht werden. Ebenfalls sollte eine Antwort auf die Frage gesucht werden, ob das neue Pruefgasgemisch eine Erleichterung fuer die Bescheinigungspraxis von eigensicheren Systemen fuer den Steinkohlenbergbau mit sich bringt (mehr Verbraucher an eine speisende Quelle moeglich) oder ob eine Beschraenkung (wesentlich weniger Verbraucher an eine speisende Quelle) zu erwarten ist. Beide Fragestellungen konnte durch ein umfangreiches Versuchsprogramm, das an zwei aufgebauten Pruefplaetzen innerhalb der verlaengerten Projektlaufzeit durchgefuehrt wurde, in Verbindung mit der Neuauswertung aelterer Versuche der BVS und der recherchierten Literatur beantwortet werden. (orig.)

Effect of temperature on the volumetric properties of (cyclohexanone+an aromatic hydrocarbon)

International Nuclear Information System (INIS)

Wang Haijun; Liu Wei; Wu Yonghua

2004-01-01

The excess molar volume VmE of (cyclohexanone+benzene, or toluene, or ethylbenzene, or styrene) were obtained from the densities measured by means of a vibrating-tube densimeter over the whole composition range at temperatures (293.15, 303.15, 313.15, 323.15, 333.15, 343.15, 353.15) K and atmospheric pressure. The excess molar volume VmE provide the temperature dependence of VmE in the temperature range of (293 to 353) K. The VmE results were correlated using the fourth-order Redlich-Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters. It was found that the VmE in the systems studied increase with rising temperature

MRI-detected skull-base invasion. Prognostic value and therapeutic implication in intensity-modulated radiotherapy treatment for nasopharyngeal carcinoma

Energy Technology Data Exchange (ETDEWEB)

Cheng, Yi-Kan; Jiang, Ning; Yue, Dan; Tang, Ling-Long; Zhang, Fan; Lin, Li; Liu, Xu; Chen, Lei; Ma, Jun [Sun Yat-sen University Cancer Center, Department of Radiation Oncology, Guangzhou (China); Liu, Li-Zhi [Sun Yat-sen University Cancer Center, Department of Radiology, Guangzhou (China)

2014-10-15

With advances in imaging and radiotherapy, the prognostic value of skull-base invasion in nasopharyngeal carcinoma (NPC) needs to be reassessed. We aimed to define a classification system and evaluate the prognostic value of the classification of magnetic resonance imaging (MRI)-detected skull-base invasion in NPC treated with intensity-modulated radiotherapy (IMRT). We retrospectively reviewed 749 patients who underwent MRI and were subsequently histologically diagnosed with nondisseminated NPC and treated with IMRT. MRI-detected skull-base invasion was not found to be an independent prognostic factor for overall survival (OS), distant metastasis-free survival (DMFS), local relapse-free survival (LRFS), or disease-free survival (DFS; p > 0.05 for all). Skull-base invasion was classified according to the incidence of each site (type I sites inside pharyngobasilar fascia and clivus vs. type II sites outside pharyngobasilar fascia). The 5-year OS, DMFS, LRFS, and DFS rates in the classification of skull-base invasion in NPC were 83 vs. 67 %, 85 vs.75 %, 95 vs. 88 %, and 76 vs. 62 %, respectively (p < 0.05 for all). Multivariate analysis indicated the classification of skull-base invasion was an independent prognostic factor. MRI-detected skull-base invasion is not an independent prognostic factor in patients with NPC treated with IMRT. However, classification according to the site of invasion has prognostic value. Therefore, patients with various subclassifications of stage T3 disease may receive treatment with different intensities; however, further studies are warranted to prove this. (orig.) [German] Aufgrund der Fortschritte der bildgebenden Verfahren und der Strahlentherapie muss der prognostische Wert der Invasion des nasopharyngealen Karzinoms (NPC) in die Schaedelbasis erneut bewertet werden. Unser Ziel ist die Definition eines Klassifikationssystems und die Untersuchung des prognostischen Werts der Klassifikation der MRT-ermittelten Invasion des mit

Further development and optimisation of the free piston concept for Vuilleumier heat pumps. Final report; Weiterentwicklung und Optimierung des Freikolben-Konzeptes fuer Vuilleumier-Waermepumpen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Kuehl, H.D.; Ruether, J.

2003-09-01

The project was aimed at the development of know-how for commercial application of Vuilleumier heat pumps in heating systems for domestic buildings. The investigations were successful. The only aspect that requires further investigation are the static gas stores. (orig.) [German] Das Ziel dieses Projektes, die Erarbeitung des fuer eine zukuenftige kommerzielle Umsetzung der Vuilleumier-Freikolbentechnik in Waermepumpen zur Gebaeudeheizung erforderlichen Know-how, kann auf Grund der vorliegenden Ergebnisse in grossen Teilen als erreicht bezeichnet werden. Lediglich im Bereich der statischen Gaslager besteht noch Bedarf an weiterfuehrenden, quantitativen Untersuchungen ihres Tragverhaltens, waehrend insbesondere die Fragestellungen im Bereich der thermodynamischen sowie der waerme-, stroemungs- und regelungstechnischen Auslegung und Gestaltung zufriedenstellend geklaert werden konnten. Abgesehen von einigen weiteren Detailoptimierungen und der noch ausstehenden, umfassenden experimentellen Dokumentation der neuen Versuchsmaschine ist eine Weiterfuehrung der Arbeiten nicht mehr als reines Hochschulprojekt, sondern nur mit Industriebeteiligung und unter besonderer Beruecksichtigung fertigungs- und produktionstechnischer Aspekte sinnvoll. Der erreichte Entwicklungsstand mit zwei funktionsfaehigen Versuchsanlagen und dem im Verlaufe dieses Projektes erworbenen, fuer eine kommerzielle Produktentwicklung verfuegbaren Know-how bietet hierfuer eine gute Grundlage. (orig.)

TALGO BT - a variable gauge diesel driving unit for TALGO trains; TALGO BT - ein Diesel-Triebkopf mit variabler Spurweite fuer TALGO-Zuege

Energy Technology Data Exchange (ETDEWEB)

Zander, C.P. [Siemens Krauss-Maffei Lokomotiven GmbH, Muenchen (Germany)

2000-03-01

An adjustable driving unit was developed for the variable gauge TALGO trains which have been in use for decades. The unit also has a novel type of carriage and a novel braking system. [German] Fuer die seit Jahrzehnten im Einsatz befindlichen, spurwechselfaehigen TALGO-Zuege wurde ein umspurbarer Triebkopf entwickelt. Dieses Fahrzeug ist in mehrfacher Hinsicht ohne Vorbild. Neu sind neben dem spurveraenderlichen Drehgestell die Fahrwerksanordnung und das Bremssystem. (orig.)

Sustainability and social benefits of the planning of green areas and landscape planning versus their curteilment. Lifestyles as a challenge to, and an opportunity for, economy; Wirtschaft, Wissenschaft und Umwelt. Bd. 7. Nachhaltigkeit und gesellschaftlicher Nutzen von Gruenordnungsplanung und Landschaftsplanung kontra Reduktion. - Lebensstile als Herausforderung und Chance fuer die Wirtschaft

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-11-01

The book contains the lecture series given within the framework of the 7th Economy Forum ``Economy, science and environment``, organized jointly by the Zentralstelle fuer Forschungs- und Entwicklungstransfer und Wissenschaftliche Weiterbildung (FET and WW) of Essen University and the chamber of industry and trade for Essen, Muelheim/Ruhr and Oberhausen in Essen. The lectures were delivered at the following events at the Essen University: `Sustainability and social benefits of the planning of green areas and landscapes versus their curtailment` (5 June 1997); and `Lifestyles as a challenge to and an opportunity for economy` (13 November 1997). (orig.) [Deutsch] Der Bericht gibt die Vortraege der Veranstaltungsreihe Wirtschaftsforum VII `Wirtschaft, Wissenschaft und Umwelt` wieder, veranstaltet von der FET and WW Zentralstelle fuer Forschungs- und Entwicklungstransfer und Wissenschaftliche Weiterbildung der Universitaet-GH Essen in Zusammenarbeit mit der Industrie- und Handelskammer fuer Essen, Muelheim an der Ruhr, Oberhausen zu Essen. Die Vortraege sind auf folgenden Veranstaltungen an der Universitaet-GH Essen gehalten worden:`Nachhaltigkeit und gesellschaftlicher Nutzen von Gruenordnungsplanung und Landschaftsplanung kontra Reduktion` am 5. Juni 1997 und `Lebensstile als Herausforderung und Chance fuer die Wirtschaft` am 13. November 1997. (orig.)

HADRON CALORIMETER (HCAL)

CERN Multimedia

A. Skuja

Since the beginning of 2007, HCAL has made significant progress in the installation and commissioning of both hardware and software. A large fraction of the physical Hadron Calorimeter modules have been installed in UX5. In fact, the only missing pieces are HE- and part of HO. The HB+/- were installed in the cryostat in March. HB scintillator layer-17 was installed above ground before the HB were lowered. The HB- scintillator layer-0 was installed immediately after completion of EB- installation. HF/HCAL Commissioning The commissioning and checkout of the HCAL readout electronics is also proceeding at a rapid pace in Bldg. 904 and USC55. All sixteen crates of HCAL VME readout electronics have been commissioned and certified for service. Fifteen are currently operating in the S2 level of USC55. The last crate is being used for firmware development in the Electronics Integration Facility in 904. All installed crates are interfaced to their VME computers and receive synchronous control from the fully-equipp...

Track recognition with an associative pattern memory

International Nuclear Information System (INIS)

Bok, H.W. den; Visschers, J.L.; Borgers, A.J.; Lourens, W.

1991-01-01

Using Programmable Gate Arrays (PGAs), a prototype for a fast Associative Pattern Memory module has been realized. The associative memory performs the recognition of tracks within the hadron detector data acquisition system at NIKHEF-K. The memory matches the detector state with a set of 24 predefined tracks to identify the particle tracks that occur during an event. This information enables the trigger hardware to classify and select or discriminate the event. Mounted on a standard size (6U) VME board, several PGAs together form an associative memory. The internal logic architecture of the Gate Array is used in such a way as to minimize signal propagation delay. The memory cells, containing a binary representation of the particle tracks, are dynamically loadable through a VME bus interface, providing a high level of flexibility. The hadron detector and its readout system are briefly described and our track representation method is presented. Results from measurements under experimental conditions are discussed. (orig.)

MPS Vax monitor and control software architecture

International Nuclear Information System (INIS)

Allison, S.; Spencer, N.; Underwood, K.; VanOlst, D.; Zelanzy, M.

1993-04-01

The new Machine Protection System (MPS) now being tested at the SLAC Linear Collider (SLC) includes monitoring and controlling facilities integrated into the existing VAX control system. The actual machine protection is performed by VME micros which control the beam repetition rate on a pulse-by-pulse basis based on measurements from fault detectors. The VAX is used to control and configure the VME micros, configure custom CAMAC modules providing the fault detector inputs, monitor and report faults and system errors, update the SLC database, and interface with the user. The design goals of the VAX software include a database-driven system to allow configuration changes without code changes, use of a standard TCP/IP-based message service for communication, use of existing SLCNET micros for CAMAC configuration, security and verification features to prevent unauthorized access, error and alarm logging and display updates as quickly as possible, and use of touch panels and X-windows displays for the user interface

Realtime control system for microprobe beamline at PLS

Energy Technology Data Exchange (ETDEWEB)

Yoon, J.C.; Lee, J.W.; Kim, K.H.; Ko, I.S. [Pohang Accelerator Laboratory, POSTECH, Pohang (Korea)

1998-11-01

The microprobe beamline of the Pohang Light Source (PLS) consists of main and second slits, a microprobe system, two ion chambers, a video-microscope, and a Si(Li) detector. These machine components must be controlled remodely through the computer system to make user's experiments precise and speedy. A real-time computer control system was developed to control and monitor these components. A VMEbus computer with an OS-9 real-time operating system was used for the low-level data acquisition and control. VME I/O modules were used for the step motor control and the scalar control. The software has a modular structure for the maximum performance and the easy maintenance. We developed the database, the I/O driver, and the control software. We used PC/Windows 95 for the data logging and the operator interface. Visual C{sup ++} was used for the graphical user interface programming. RS232C was used for the communication between the VME and the PC. (author)

Clean air litigation; Klagen fuer Saubere Luft

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-11-11

The pollution of air by nitrogen dioxide (NO{sub 2}) in cities is one of the central challenges of air pollution in Germany, in addition to the pollution of particulate matter (PM10). In cooperation with the British non-governmental organization ClientEarth, the German Environmental Aid (DUH) filed a lawsuit in November 2015 for exceeding air quality limits for NO{sub 2}. The cities of Stuttgart, Frankfurt, Duesseldorf, Essen, Gelsenkirchen, Aachen, Cologne and Bonn are affected. Here, citizens are constantly exposed to high air pollution. Because of the excess of the NO{sub 2} limits at all traffic-related measuring stations in Berlin, the DUH initiated legal steps and filed a lawsuit too in June 2016. With the lawsuits, DUH wants to promote the implementation of measures to reduce NO{sub 2} in Germany. [German] Die Belastung der Luft durch Stickstoffdioxid (NO{sub 2}) in Staedten ist neben der Belastung durch Feinstaub (PM10) eine der zentralen Herausforderungen der Luftreinhaltung in Deutschland. In Zusammenarbeit mit der britischen Nichtregierungsorganisation ClientEarth legte die Deutsche Umwelthilfe (DUH) im November 2015 Klage wegen Ueberschreitung der Luftqualitaetsgrenzwerte fuer NO{sub 2}ein. Betroffen sind die Staedte Stuttgart, Frankfurt, Duesseldorf, Essen, Gelsenkirchen, Aachen, Koeln und Bonn. Hier sind Buergerinnen und Buerger anhaltend zu hoher Luftverschmutzung ausgesetzt. Wegen Ueberschreitung der NO{sub 2}-Grenzwerte an allen verkehrsnahen Messstationen in Berlin hat die DUH im Juni 2016 auch hier rechtliche Schritte eingeleitet und Klage eingereicht. Mit den Klagen will die DUH die Umsetzung von Massnahmen zur NO{sub 2}-Reduktion in Deutschland voranbringen.

Design and configuration of VME EPICS driver for He RFQ LLRF control system

Energy Technology Data Exchange (ETDEWEB)

Ahn, Tae-Sung; Jeong, Hae-Seong; Kim, Seong-Gu; Song, Young-Gi; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Cho, Yong-Sub [KOMAC, Gyeongju (Korea, Republic of)

2015-05-15

In Helium Radio-Frequency Quadrupole (He RFQ) development, the role of the high-power Radio-Frequency (RF) is very important because it is responsible for stable delivery and efficient acceleration of the beam. Since the amplitude control requirements of LLRF system are ±1 % (amplitude), we need a precise remote control system for this reason. This system is referred to as Low-Level RF (LLRF) control system. This paper describes the basic configuration tasks performed by hardware side and the software side to build the LLRF control system, and describes the future work of the He RFQ LLRF control system based on this paper. LLRF control system development at the He RFQ development stage is important. LLRF control system development requires the exact configuration of hardware and software. For each of the Layer configuration is completed on the software side and hardware modules: vxworks operating system installation, EPICS BASE compilation, module source code compiled, object file loading and execution on vxworks, EPICS IOC operation check, etc.

Design, construction and experimental investigation of a Stirling refrigerator for freezing in supermarkets. Final report; Auslegung, Bau und experimentelle Untersuchung einer Stirling-Kaeltemaschine fuer die Tiefkuehlung in Supermaerkten. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Steimle, F.; Schikora, H.; Mai, M.; Siegel, A.

2000-10-01

Several theoretical investigations have shown that Stirling refrigerators could be a promising alternative for refrigeration at 'near-ambient' temperatures (above -40 C). These theoretical statements shall be validated in an actual research project by measurements taken from a Stirling refrigerator that is optimised for this range of temperature. In this paper first measurement results of this new developed Solo 161 Stirling refrigerator will be presented. Problems are investigated by detailed measurements. Possible improvements are described. (orig.) [German] Verschiedene theoretische Untersuchungen haben gezeigt, dass Stirling-Kaeltemaschinen eine interessante Alternative fuer die Kaelteerzeugung im sog. 'umgebungsnahen' Temperaturbereich (oberhalb von -40 C) darstellen koennten. In einem derzeit laufenden Forschungsvorhaben sollen diese theoretischen Untersuchungen durch Messungen an einer fuer diesen Temperaturbereich optimierten Stirling-Kaeltemaschine ueberprueft werden. In diesem Aufsatz werden erste Messergebnisse dieser neu entwickelten Solo 161 Stirling-Kaeltemaschine praesentiert. Anhand detaillierter Messergebnisse werden Schwachstellen lokalisiert und moegliche Verbesserungsmassnahmen beschrieben. (orig.)

1981 research programme and budget of Hahn-Meitner-Institut fuer Kernforschung Berlin

International Nuclear Information System (INIS)

Anon.

1981-01-01

Hahn-Meitner-Institut fuer Kernforschung Berlin (HMI) is one of the twelve large research centers of the Federal Republic of Germany; like the other centers, it has to present a combined research programme and budget (programme budget) every year. In these programme budgets, as in the medium-term financial planning in the federal budget, planning for the current year is combined with a medium-term plan for the three next years. For the year 1981, the budget of HMI includes a total expenditure of about DM 85 million, DM 71.2 million of which are direct R + D expenditures. This R + D programme is carried by 396 of the total staff of 705. Research is done in the following fields (approximate figures): Heavy ion physics DM 23.0 million. Radiation- and photochemistry DM 11.4 million. Solid state research DM 20.9 million. Nuclear chemistry DM 8.9 million. Data processing/electronics DM 7.0 million. (orig./UA) [de

Intelligent robot / manipulator systems for NDT of primary components in nuclear power plants; Intelligente Roboter / Handhabungssysteme fuer die Pruefung von Primaerkreiskomponenten in Kernkraftwerken

Energy Technology Data Exchange (ETDEWEB)

Dirauf, F.; Gottfried, R.; Bauer, R. [Siemens AG, KWU, Erlangen (Germany)

1999-08-01

The inspection robot developed by Siemens KWU for BWR reactor pressure vessel inspection has a mounting plate with exchangeable parts so as to fit into the various profiles of the vertical guiding tracks at the different pressure vessels. The robot is a versatile device also due to its variable cinematic equipment and thus can be used for any task hitherto performed by the available manipulators. For BWR pressure vessel testing, a novel, compact probe system equipped with five radiation assemblies has been combined with the ultrasonic SAPHIR probe. Until now, NDE of the RPV nozzles in BWRs has been carried out from the outside of the component. The newly developed manipulator of Siemens for inspection of the RPV nozzles can be moved to the nozzles either by manipulating arms or by a floating device, and is fixed to the nozzles by means of pneumatic suckers. Due to the modular design, probe arrays can be exchanged according to nozzle size or structural profiles to be tested. The mobile testing robot SISTAR for PWR pressure vessels consists of a floating cylinder platform that is moved under water to the target position by popellers or by ropes. It is self-adjusting for taking horizontal position and is held in position in the center of the RPV by means of a radial arrangement of legs automatically and synchronously extending from the robot. The platform can be equipped with one or two manipulator arms, depending on the testing task. (orig./CB) [Deutsch] Der von Siemens KWU neuentwickelte Pruefroboter fuer SWR-Reaktordruckbehaelter besitzt einen auswechselbaren Grundwagen, so dass er an die unterschiedlichen Profile der vertikalen Fuehrungsschienen in den einzelnen Kraftwerken angepasst werden kann. Er ist damit auch aufgrund seiner variablen Kinematik universell einsetzbar und kann saemtliche herkoemmliche Manipulatoren ersetzen. In Verbindung mit dem US-Pruefgeraet SAPHIR wurde fuer die SWR-Reaktordruckbehaelter ein neuartiges kompaktes Pruefkopfsystem mit fuenf

Strip detectors read-out system user's guide

International Nuclear Information System (INIS)

Claus, G.; Dulinski, W.; Lounis, A.

1996-01-01

The Strip Detector Read-out System consists of two VME modules: SDR-Flash and SDR-seq completed by a fast logic SDR-Trig stand alone card. The system is a self-consistent, cost effective and easy use solution for the read-out of analog multiplexed signals coming from some of the front-end electronics chips (Viking/VA chips family, Premus 128 etc...) currently used together with solid (silicon) or gas microstrip detectors. (author)

Water quality objectives for priority substances aiming at the protection of the aquatic community. Final report; Ableitung von Zielvorgaben fuer prioritaere Stoffe zum Schutz von Oberflaechengewaessern. Endbericht

Energy Technology Data Exchange (ETDEWEB)

Herrchen, M.; Mueller, M.; Storm, A.

2000-03-15

Zielvorgaben fuer das Schutzgut aquatische Lebensgemeinschaft, welches Zielsetzung des vorliegenden Berichtes ist, wird in der Regel der niedrigste NOEC-Wert fuer die empfindlichste Art aus vier verschiedenen trophischen Ebenen der Biozoenose herangezogen. Liegen die Daten nicht im erforderlichen Umfang vor, so werden Ausgleichsfaktoren eingesetzt, deren Hoehe ihrerseits von der Testdauer, dem betrachteten biologischen Endpunkt und dem Datenumfang abhaengig ist. Im vorliegenden Bericht wurden schwerpunktmaessig Zielvorgaben fuer eine Reihe von Pflanzenschutzmitteln abgeleitet; jedoch wurden auch halogenierte Verbindungen sowie die aktuell diskutierten Nonylphenole und Tributylzinn-Verbindungen betrachtet. Die Datenlage erlaubte fuer insgesamt 11 der 27 behandelten Verbindungen/Stoffgruppen die Ableitung von Zielvorgaben. Datenrecherche- und Bewertungsergebnisse wurden sowohl in Form einer Datenbank (MS-ACCESS), ausgestattet mit einer Schnittstelle zur oekotoxikologischen Schnellauskunft, als auch in Form von Stoffdatenblaettern dokumentiert. (orig.)

Selected examples of online measuring techniques for N and P elimination at sewage treatment plants; Ausgewaehlte Beispiele fuer die Online-Messtechnik zur N- und P-Elimination in Klaeranlagen

Energy Technology Data Exchange (ETDEWEB)

Wolffson, C.

1997-12-31

More stringent demands on the pollutant concentration of effluents call for stricter self-monitoring and enhanced process control. Devices for measuring ammonium, nitrate and phosphate that suit practical requirements are available. The readings continuously obtained can be additionally used by the control room, within the framework of modern sewage plant process control, for process monitoring. Apart from the financial advantages of saving ventilation energy and chemicals, control loops with continuous measurements are superior in that they enhance the process stability of sewage treatment. (orig.) [Deutsch] Verschaerfte Einleitungsbedingungen erfordern verstaerkte Eigenueberwachung und verbesserte Prozessregelung. Betriebstaugliche Dauermessgeraete fuer Ammonium, Nitrat und Phosphat stehen zur Verfuegung. Die kontinuierlich anfallenden Messwerte koennen im Rahmen der modernen Klaeranlagenleittechnik neben der Prozessregelung zusaetzlich in den Schaltwarten zur Prozessueber-wachung genutzt werden. Neben den Einsparungsmoeglichkeiten fuer Belueftungsenergie und Chemikalien, die einen finanziellen Vorteil bedeuten, liegt der entscheidende Vorzug der Regelkreise mit konti-nuierlichen Messungen in der Verbesserung der Prozessstabilitaet der Abwasserreinigung. (orig.)

Special liquid nitrogen dewar for a superconducting levitation transport system; Spezialkryostat fuer ein supraleitendes Schwebetransportsystem

Energy Technology Data Exchange (ETDEWEB)

Schumann, B.; Binneberg, A. [ILK Dresden gGmbH, Dresden (Germany)

2002-07-01

Within a joint project supported by the Free State Saxony a novel bearing and transport system was developed. The prototype is based on the combination of the magnetic bearing technique using high temperature-superconductors with a non-contacting linear drive. This non-contracting 'lift' is free from friction and contaminations due to wear and therefore predestinated for applications in clean rooms, e.g. in the microelectronic technology. (orig.) [German] Im Rahmen eines Verbundprojektes, gefoerdert vom Freistaat Sachsen, wurde ein neuartiges Lager- und Transportsystem in Form einer Kombination der supraleitenden Magnetlagertechnik mit Hochtemperatursupraleitern und einem beruehrungslos arbeitenden Linearantriebssystem am Beispiel eines Demonstrators entwickelt. Der voellig beruehrungslos und damit reibungs- und abriebfrei funktionierende Lift ist fuer Anwendungen in Reinraeumen z.B. in der Mikroelektroniktechnologie praedestiniert. (orig.)

2003 annual meeting of the Deutsche Gesellschaft fuer zerstoerungsfreie Pruefung (DGZfP): NDE in research, development and application

International Nuclear Information System (INIS)

2004-01-01

The annual meeting 2004 of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung e.V. (Berlin, Federal Republic of Germany) was proceeded in Salzburg (Austria) between 17th and 19th May, 2004. The topics of this proceeding are in general all aspects of non-destructive materials testing: repeating tests/inspections, characterization of materials, aerospace, simulation, automobiles, metallic products, optical processes, testing of tubes, testing of acoustic emission, digital radiography, technology of ultrasonic devices, testing of containers, railway, standardization and standards; computer tomography; thermography; special ultrasonic technologies; ultrasonic testing; transmission testing; eddy current testing; surface processes; radiation protection; construction industry; quality assurance

2007 annual meeting of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung (DGZfP): NDE in research, development and application

International Nuclear Information System (INIS)

2007-01-01

The 2007 annual meeting of Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung was held at Fuerth in northern Bavaria, a town that had its 1000th anniversary in 2007. Subjects discussed at the conference were new materials, modern technologies, and innovative non-destructive testing. The conference was held close to the ''Technikum Fuerth'' and ''Uferstadt Fuerth'', both of which are centers of research and seats of young, innovative businesses, which gave young scientists an opportunity to present the results of their work and allowed the DGZfPL to present itself to young scientists and to invite discussions. (orig.)

Volumetric intensity-modulated arc therapy vs. 3-dimensional conformal radiotherapy for primary chemoradiotherapy of anal carcinoma. Effects on treatment-related side effects and survival

Energy Technology Data Exchange (ETDEWEB)

Weber, Hanne Elisabeth; Droege, Leif Hendrik; Hennies, Steffen; Herrmann, Markus Karl; Wolff, Hendrik Andreas [University Medical Center Goettingen, Dept. of Radiotherapy and Radiooncology, Goettingen (Germany); Gaedcke, Jochen [University Medical Center Goettingen, Dept. of General Surgery, Goettingen (Germany)

2015-11-15

Primary chemoradiotherapy (CRT) is the standard treatment for locally advanced anal carcinoma. This study compared volumetric intensity-modulated arc therapy (VMAT) to 3-dimensional conformal radiotherapy (3DCRT) in terms of treatment-related side effects and survival. From 1992-2014, 103 consecutive patients with anal carcinoma UICC stage I-III were treated. Concomitant CRT consisted of whole pelvic irradiation, including the iliac and inguinal lymph nodes, with 50.4 Gy (1.8 Gy per fractions) by VMAT (n = 17) or 3DCRT (n = 86) as well as two cycles of 5-fluorouracil and mitomycin C. Acute organ and hematological toxicity were assessed according to the Common Terminology Criteria (CTC) for Adverse Events version 3.0. Side effects ≥ grade 3 were scored as high-grade toxicity. High-grade acute organ toxicity CTC ≥ 3 (P < 0.05), especially proctitis (P = 0.03), was significantly reduced in VMAT patients. The 2-year locoregional control (LRC) and disease-free survival (DFS) were both 100 % for VMAT patients compared with 80 and 73 % for 3DCRT patients. VMAT was shown to be a feasible technique, achieving significantly lower rates of acute organ toxicity and promising results for LRC and DFS. Future investigations will aim at assessing the advantages of VMAT with respect to late toxicity and survival after a prolonged follow-up time. (orig.) [German] Die primaere Radiochemotherapie (RCT) gilt als Standardtherapie fuer lokal fortgeschrittene Analkarzinome. In dieser Studie wurde die volumetrisch modulierte Rotationstherapie (''volumetric intensity-modulated arc therapy'', VMAT) mit der klassischen dreidimensionalen konformalen Radiotherapie (3DCRT) hinsichtlich therapieassoziierter Nebenwirkungen und Ueberleben verglichen. Von 1992-2014 wurden 103 aufeinanderfolgende Patienten mit einem Analkarzinom im UICC-Stadium I-III behandelt. Die kombinierte RCT bestand aus der Bestrahlung des gesamten Beckens inklusive der iliakalen und der inguinalen

More than only weather protection for modern working environments. Multifunctional facade modul system for office buildings; Mehr als nur Wetterschutz fuer moderne Arbeitswelten. Multifunktionales Fassaden-Modulsystem fuer Buerogebaeude

Energy Technology Data Exchange (ETDEWEB)

Eickmeyer, Philipp [Technische Univ. Braunschweig (Germany). Inst. fuer Gebaeude- und Solartechnik

2011-07-01

Together with industrial and commercial partners, the Institute for Building and Solar Technology at the Technical University of Braunschweig (Braunschweig, Federal Republic of Germany) plans and develops working environments for the 21st century. Thus, the future:workspace is designed from the ninth floor in the university's high-rise BS4. Architectural visions are combined with innovative technical solutions and demonstrate the future quality of most modern office workplaces. The facade of the future:workspace is just more than a building closure and weather protection. A Schueco E{sup 2} facade is used as a multifunctional module system which is examined in the research project 'Distributed and modular building technology to increase energy efficiency and comfort of use'.

Agora Energiewende (2016). What do Germany's climate protection goals mean for the brown coal regions? An analysis based on the eleven key points for a coal consensus; Agora Energiewende (2016). Was bedeuten Deutschlands Klimaschutzziele fuer die Braunkohleregionen? Eine Analyse auf Basis der elf Eckpunkte fuer einen Kohlekonsens

Energy Technology Data Exchange (ETDEWEB)

Graichen, Patrick; Praetorius, Barbara; Rosenkranz, Gerd; Litz, Philipp

2016-04-15

Since Paris's historical climate agreement, it has become clear that from now on energy supply will be discussed worldwide on the premise of decarbonisation. Germany as a traditional coal country and as a land of energy transition can no longer avoid this debate. After all, the climate targets that have been adopted several times for 2030, 2040 and 2050 will ultimately mean the end of coal-fired power generation. In January 2016, Agora Energiewende presented a proposal with the eleven cornerstones for a coal consensus on how such an exit from coal-fired power generation could look like. We are concerned with a cross-party consensus that is broadly anchored in society, which gives all parties involved planning security and reliability and at the same time paves the way for a socially balanced and fairly structured transition to the new energy system. The impacts are particularly relevant for the brown coal regions concerned. In order to make the gradual phasing out of coal-fired power generation socially and economically compatible, special attention must be paid to open-cast brown coal mines and power plants as well as to regional structural change. This publication therefore takes a closer look at precisely these aspects. [German] Seit dem historischen Klimaabkommen von Paris ist klar: Die Energieversorgung wird von nun an weltweit unter der Praemisse der Dekarbonisierung diskutiert. Deutschland als traditionelles Kohleland und als Land der Energiewende kann dieser Debatte nicht laenger ausweichen. Denn die fuer 2030, 2040 und 2050 mehrfach beschlossenen Klimaziele bedeuten letztlich den Ausstieg aus der Kohleverstromung. Agora Energiewende hat im Januar 2016 mit den Elf Eckpunkten fuer einen Kohlekonsens einen Vorschlag vorgelegt, wie ein solcher Ausstieg aus der Kohleverstromung aussehen koennte. Uns geht es um einen parteiuebergreifenden, gesellschaftlich breit verankerten Konsens, der allen Beteiligten Planungssicherheit und Verlaesslichkeit gibt und

Assessment of technical risks and energy consumption of processes for regeneration of polluted land; Abschaetzung von technischem Risiko und Energiebedarf bei Sanierungsmassnahmen fuer Altlasten

Energy Technology Data Exchange (ETDEWEB)

Trappmann, F.

1997-04-01

In case of sensitive use of a site or its surroundings further consideration on pre-elevated remedial action designs should be undertaken. The generated method for the assessment of technical risks and energy consumption intends to enable different users with smaller or broader specialist knowledge to handle the problem. Basic instrument for the variation of intensity of handling is to divide the technical process in a special way into small elements, called module. With regard to the processing line and to the complexity of the process the modules are connected on different levels according to their common function. The levels handled by experts are called detailed risks assessment, the abridged kind of handling is especially for authorities. For some types of contaminations and some technologies are tools and lists available to enable an easier treatment. Generally the method and the tools are employable for other sites too. For the comparative assimilating assessment itself verbal argumentation is used to describe the causes, that modules are identified as weak (in comparison). The result of the consideration is a ranking of the prefered applied technologies rated by energy consumption and technical risks or a demand for special improvements in the case of commissioning. (orig.) [Deutsch] Die vorliegende Dissertation konzentriert sich auf die weitergehende Risiko- und Energiebetrachtung weniger, zuvor mittels strukturierter Auswahlverfahren favorisierter Sanierungsszenarien. Zwecks effizienter Ausnutzung verfuegbarer Finanzmittel erscheint es angemessen, die bislang in ihrer Gesamtheit betrachteten Verfahrensschritte intern eingehender zu untersuchen und potentielle Risiken bewertbar zu machen. Die geschilderte Vorgehensweise basiert auf der Untergliederung komplexer Sanierungsszenarien in einzelne Elemente (Moduln etc.) gemaess dem funktionalen Zusammenwirken und dem Verfahrensablauf. Fuer einzelne Moduln koennen im Rahmen detaillierterer Betrachtungen

Raw materials for the energy supply of the future. Geology, markets, environmental influences; Rohstoffe fuer die Energieversorgung der Zukunft. Geologie, Maerkte, Umwelteinfluesse

Energy Technology Data Exchange (ETDEWEB)

Hagelueken, Christian [Umicore, Hanau-Wolfgang (Germany); Thauer, Rudolf K. [Max-Planck-Institut fuer Terrestrische Mikrobiologie, Marburg (Germany); Buchholz, Peter [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany). Deutsche Rohstoffagentur; Herzig, Peter [GEOMAR Helmholtz-Zentrum fuer Ozeanforschung Kiel (Germany); Gutzmer, Jens [Technische Univ. Bergakademie Freiberg (Germany); Helmholtz-Institut Freiberg fuer Ressourcentechnologie (Germany); Littke, Ralf [Rheinisch-Westfaelische Technische Hochschule (RWTH), Aachen (Germany); Angerer, Gerhard; Wellmer, Friedrich-Wilhelm

2015-11-15

More and more metals are needed to expand modern energy technologies, but we can not completely dispense with fossil raw materials and biomass in the near future either. Are the incidence of the conversion of energy sources sufficient? The analysis of the academy project ''Energy Systems of the Future'' (ESYS) comes to the conclusion that geologically enough raw materials are available. The challenge, however, is to make the supply safe, affordable and environmentally and socially compatible. The analysis explains the mechanisms of action on the global commodity markets and identifies supply risks. These include, for example, sudden demand on the international markets as well as the unequal distribution of the world's raw material reserves. This is followed by the analysis approaches, in order to recognize warning signals for potential raw material bottlenecks in time, to develop evasive strategies and to secure the raw material supply for the energy turnarounds. For example, the expansion of recycling can help to reduce the dependence on metal imports. In mining, on the other hand, innovative technologies have to be developed in order to improve the exploration and utilization of the deposits. By establishing binding environmental and social standards, the extraction of raw materials could also become more sustainable. The analysis also highlights the importance of bioenergy and fossil raw materials, such as oil and natural gas, for energy generation. The authors describe the advantages and disadvantages of these energy carriers and the measures that can be used to reduce environmental pollution such as greenhouse gas emissions. [German] Fuer den Ausbau moderner Energietechnologien werden immer mehr Metalle benoetigt, doch auch auf fossile Rohstoffe und Biomasse koennen wir in naher Zukunft nicht vollstaendig verzichten. Reichen die Vorkommen zur Umsetzung der Energiewende aus? Die Analyse des Akademienprojekts &apos

Ultrasound motion tracking for radiation therapy; Ultraschallbewegungstracking fuer die Strahlentherapie

Energy Technology Data Exchange (ETDEWEB)

Jenne, J. [Fraunhofer-Institut fuer Bildgestuetzte Medizin MEVIS, Bremen (Germany); Mediri GmbH, Heidelberg (Germany); Schwaab, J. [Mediri GmbH, Heidelberg (Germany)

2015-11-15

bzw. -kompensation werden zurzeit untersucht oder schon in der Klinik angewendet. Die Sonographie ist eine vielversprechende Option, die nun kurz vor der klinischen Implementierung steht. Hoher Weichteilkontrast, Echtzeitfaehigkeit, Verzicht auf ionisierende Strahlung sowie relativ geringe Anschaffungskosten zeichnen den Ultraschall besonders fuer diesen Zweck aus. Ultraschallbewegungstracking ist ein bildbasierter Ansatz, d. h. das Zielvolumen oder eine damit verbundene Struktur werden direkt beobachtet und deren Bewegung automatisch auf dem Ultraschallbild nachverfolgt. Diverse Algorithmen stehen derzeit zur Verfuegung, die sowohl aus 2-D- als auch 3-D-Bildern die aktuellen Koordinaten einer Zielstruktur liefern. Die Auswahl eines passenden Schallfensters ist jedoch nicht trivial, und ein Goldstandard fuer die Positionierung und Halterung des Schallkopfs wurde noch nicht erarbeitet. Ausserdem sind die Verarbeitung der Koordinateninformation an der Therapieeinheit sowie die dynamische Anpassung des Strahlfeldes grosse Herausforderungen. Es ist offen, ob sich Ultraschallbewegungstracking in der klinischen Routine etabliert, obwohl alle technischen Voraussetzungen als erfuellt angesehen werden koennen, sodass weiterhin spannende Entwicklungen in diesem Forschungsfeld zu erwarten sind. (orig.)

Hypoxia imaging with [18F]-FMISO-PET for guided dose escalation with intensity-modulated radiotherapy in head-and-neck cancers

Energy Technology Data Exchange (ETDEWEB)

Henriques de Figueiredo, B. [Institut Bergonie, Department of Radiotherapy, Bordeaux (France); INCIA UMR-CNRS 5287, Bordeaux (France); Zacharatou, C. [Institut Bergonie, Department of Radiotherapy, Bordeaux (France); Galland-Girodet, S.; Benech, J. [Hospital Haut-Leveque, Department of Radiotherapy, CHRU Bordeaux (France); Clermont-Gallerande, H. de [Hospital Pellegrin, Department of Nuclear Medicine, CHRU Bordeaux (France); Lamare, F. [INCIA UMR-CNRS 5287, Bordeaux (France); Hospital Haut-Leveque, Department of Radiotherapy, CHRU Bordeaux (France); Hatt, M. [LaTIM INSERM U1101, Brest (France); Digue, L. [Hospital Saint-Andre, Department of Clinical Oncology, CHRU Bordeaux (France); Mones del Pujol, E. de [Department of Oto-rhino-laryngology, CHRU Bordeaux (France); Fernandez, P. [INCIA UMR-CNRS 5287, Bordeaux (France); Hospital Pellegrin, Department of Nuclear Medicine, CHRU Bordeaux (France); University Bordeaux 2, Bordeaux (France)

2014-09-23

Positron emission tomography (PET) with [{sup 18}F]-fluoromisonidazole ([{sup 18}F]-FMISO) provides a non-invasive assessment of hypoxia. The aim of this study is to assess the feasibility of a dose escalation with volumetric modulated arc therapy (VMAT) guided by [{sup 18}F]-FMISO-PET for head-and-neck cancers (HNC). Ten patients with inoperable stages III-IV HNC underwent [{sup 18}F]-FMISO-PET before radiotherapy. Hypoxic target volumes (HTV) were segmented automatically by using the fuzzy locally adaptive Bayesian method. Retrospectively, two VMAT plans were generated delivering 70 Gy to the gross tumour volume (GTV) defined on computed tomography simulation or 79.8 Gy to the HTV. A dosimetric comparison was performed, based on calculations of tumour control probability (TCP), normal tissue complication probability (NTCP) for the parotid glands and uncomplicated tumour control probability (UTCP). The mean hypoxic fraction, defined as the ratio between the HTV and the GTV, was 0.18. The mean average dose for both parotids was 22.7 Gy and 25.5 Gy without and with dose escalation respectively. FMISO-guided dose escalation led to a mean increase of TCP, NTCP for both parotids and UTCP by 18.1, 4.6 and 8 % respectively. A dose escalation up to 79.8 Gy guided by [{sup 18}F]-FMISO-PET with VMAT seems feasible with improvement of TCP and without excessive increase of NTCP for parotids. (orig.) [German] Die Positronenemissionstomographie (PET) mit [{sup 18}F]-Fluoromisonidazol ([{sup 18}F]-FMISO) ermoeglicht eine nichtinvasive Beurteilung der Hypoxie. Ziel dieser Studie ist es, die Durchfuehrbarkeit einer [{sup 18}F]-FMISO-PET-gefuehrten Dosissteigerung bei volumetrisch modulierter Arc-Therapie (VMAT) von Kopf-Hals-Tumoren (KHT) zu bewerten. Zehn Patienten mit inoperablen KHT der Stadien III-IV erhielten vor der Strahlentherapie eine [{sup 18}F]-FMISO-PET. Hypoxische Zielvolumina (HV) wurden automatisch mit Hilfe des FLAB(Fuzzy Locally Adaptive Bayesian

Bavarian Land Office for Environmental Protection. 1996 annual report and abstracts of publications; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1996 und Kurzbeitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [Deutsch] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

Bavarian Land Office for Environmental Protection. 1996 annual report and abstracts of publications; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1996 und Kurzbeitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [Deutsch] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

GeoPower

DEFF Research Database (Denmark)

Kirsch, Reinhard; Balling, N.; Fuchs, Sven

über die Eignung einer Lokation für die geothermische Nutzung. Sie ersetzen nicht die detaillierte geologisch/geophysikalische Untersuchung der Lokation, wie sie in den weiteren Planungsschritten erforderlich ist. Ein schneller Zugang zu den Projektergebnissen ist über die Homepage von GEUS (www...

Metallurgical phenomena in laser finishing: Interdependences between solidification morphologies and hot cracking in laser welding of mostly austenitic materials. Final reportc; Metallkundliche Phaenomene der Laserstrahlmaterialbearbeitung. Teilvorhaben: Zusammenhaenge zwischen Erstarrungsmorphologien und Heissrissentstehung beim Laserschweissen von vornehmlich austenitischen Werkstoffen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Schobbert, H.

2000-06-01

be performed by using measuring results of this newly developed test assembly. For the first time, different types of hot cracks in correlation to the change of primary solidification mode could be detected. The primary austenitic weld metals of the materials 1.4828 and 1.4306, which formed due to the change of solidification mode, showed a susceptibility to DDC. The results of this research project are a contribution to quantify the change of solidification mode and thus, the restriction of hot cracking resistance of the tested materials. (orig.) [German] Als ein spezifisches Problem des Laserschweissens stellt sich bei den wirtschaftliche wuenschenswerten hohen Schweissgeschwindigkeiten jedoch heraus, dass besonders austenitische Staehle mit einer Zusammensetzung in der Naehe der eutektischen Rinne ihren Erstarrungsmodus aendern und damit die Heissrisssicherheit eingeschraenkt sein kann. Vor diesem Hintergrund sind in der Forschungsarbeit die beim Laserschweissen entstehenden Erstarrungsmorphologien dieser Staehle in der Naehe der eutektischen Rinne besonders unter dem Aspekt kurzeitmetallurgisch bedingter kinetischer Effekte unter den Bedingungen einer schneller Erstarrung untersucht worden. Fuer drei im praktischen Einsatz weit verbreitete nichtrostende Staehle (1.4828, 1.4306 und 1.4404) wird ein von der Erstarrungsgeschwindigkeit abhaengiger Wechsel des primaeren Erstarrungsmodus von primaer ferritsch zu primaer austenitisch nachgewiesen. Die kritische Erstarrungsgeschwindigkeit kann in guter Naeherung mit einem neu entwickelten Modell durch eine geometrische Analyse der Erstarrungsstrukturen ermittelt werden. Die von der Zusammensetzung der Werkstoffe abhaengige kritische Erstarrungsgeschwindigkeit fuer den Wechsel der Primaererstarrung betraegt fuer diese Werkstoffe groessenordnungsmaessig etwa 1 m/min. Als ein wesentliches Ergebnis wird fuer die zu primaer austenitisch gewechselten Erstarrungsmorphologien die zunaechst vermutete Beeintraechtigung der

New approaches for the reliability-oriented structural optimization considering time-variant aspects; Neue Ansaetze fuer die zuverlaessigkeitsorientierte Strukturoptimierung unter Beachtung zeitvarianter Aspekte

Energy Technology Data Exchange (ETDEWEB)

Kuschel, N.

2000-07-01

Zuverlaessigkeitsmaximierung bei der Beachtung einer Kostenbeschraenkung. Der erweiterte Ansatz eines Mono-Level-Verfahrens wird fuer zeitinvariante Probleme ausfuehrlich vorgestellt, wobei die Zuverlaessigkeit der Tragwerkselemente im Rahmen der Methode erster Ordnung (FORM) analysiert wird. Fuer eine realitaetsnahe Modellierung vieler praktischer Probleme ist die Verwendung zeitvarianter Zuverlaessigkeitsbetrachtungen notwendig, weshalb verschiedene Verallgemeinerungen der neuen Ansaetze fuer die zeitvariante zuverlaessigkeitsorientierte Strukturoptimierung hergeleitet werden. Einige wichtige Eigenschaften der Optimierungsprobleme werden bewiesen. Ferner werden einige interessante Erweiterungen dieses Mono-Level-Verfahrens, zum Beispiel die Kostenoptimierung von Tragwerkssystemen und die Kostenoptimierung im Rahmen der Zuverlaessigkeitsmethode zweiter Ordnung (SORM), angegeben. (orig.)

Marketing strategies and consumer preferences for fertilizers and soils from organic residues of biogas production; Vermarktungsstrategien und Konsumentenpraeferenzen fuer Duenger und Erden aus organischen Reststoffen der Biogasproduktion

Energy Technology Data Exchange (ETDEWEB)

Dahlin, Johannes

2017-07-13

The aim of this thesis is to show marketing possibilities for fermentation products and to generate sepcific recommendations for potential producers and marketers of fermentation products. Since the marketing of fermenting products is largely unexplored and a research gap, this project was launched with an exploratory phase. After the exploratory phase, private gardeners were identified as a promising customer group. Knowledge about the preferences of private gardeners when purchasing soil and fertilizer are crucial for the market success of processed fermentation products. In order to fathom the decision-making behavior of this potential customer group, personal interviews were conducted with private gardeners. These results enable potential producers and marketers of fermentation products to create a product that is in demand on the market because it meets the needs of potential consumers. The personal preferences, however, can be very different, for which reason a segmentation into different groups with similar preferences is made. [German] Ziel dieser Arbeit ist es, Vermarktungsmoeglichkeiten fuer Gaerprodukte aufzuzeigen und konkrete Empfehlungen fuer potenzielle Hersteller und Vermarkter von Gaerprodukten zu generieren. Da die Vermarktung von Gaerprodukten weitestgehend unerforscht ist und eine Forschungsluecke darstellt, wurde dieses Vorhaben mit einer explorativen Phase gestartet. Nach der explorativen Phase wurden Privatgaertner als vielversprechende Kundengruppe identifiziert. Kenntnisse ueber die Praeferenzen von Privatgaertnern beim Kauf von Erden und Duengern sind entscheidend fuer den Markterfolg von aufbereiteten Gaerprodukten. Um das Entscheidungsverhalten dieser potenziellen Kundengruppe naeher zu ergruenden, wurden persoenliche Interviews mit Privatgaertnern durchgefuehrt. Diese Ergebnisse ermoeglichen es potenziellen Herstellern und Vermarktern von Gaerprodukten ein Produkt zu kreieren, das auf dem Markt nachgefragt wird, da es den Wuenschen der

Open Hardware For CERN's Accelerator Control Systems

CERN Document Server

van der Bij, E; Ayass, M; Boccardi, A; Cattin, M; Gil Soriano, C; Gousiou, E; Iglesias Gonsálvez, S; Penacoba Fernandez, G; Serrano, J; Voumard, N; Wlostowski, T

2011-01-01

The accelerator control systems at CERN will be renovated and many electronics modules will be redesigned as the modules they will replace cannot be bought anymore or use obsolete components. The modules used in the control systems are diverse: analog and digital I/O, level converters and repeaters, serial links and timing modules. Overall around 120 modules are supported that are used in systems such as beam instrumentation, cryogenics and power converters. Only a small percentage of the currently used modules are commercially available, while most of them had been specifically designed at CERN. The new developments are based on VITA and PCI-SIG standards such as FMC (FPGA Mezzanine Card), PCI Express and VME64x using transition modules. As system-on-chip interconnect, the public domain Wishbone specification is used. For the renovation, it is considered imperative to have for each board access to the full hardware design and its firmware so that problems could quickly be resolved by CERN engineers or its ...

Operating experience for a closed-circuit interconnected system for flue gas desulphurization at Klingenberg heating power station; Betriebserfahrungen zu einem Kreislaufverbundsystem fuer die Rauchgasentschwefelung im Heizkraftwerk Klingenberg

Energy Technology Data Exchange (ETDEWEB)

Hultsch, T [Berliner Kraft- und Licht (BEWAG)-AG, Heizkraftwerk Klingenberg, Berlin (Germany); Mueller, U [BDAG Balcke-Duerr AG, Ratingen (Germany)

1995-05-01

The cleaning of flue gases imposes extreme demands on the material concerned. By keeping below the acid dewpoint, this leads to condensation of acid products on the heating surfaces. The correct selection of the appropriate material is decisive for the availability of the overall plant. In the case of the application described in this paper, it has been possible to show that nickel-based alloys are outstandingly suitable for withstanding those kinds of stresses over many years. However, independently of this, it is valid to test material selection for each individual case of application. (orig.) [Deutsch] Die Reinigung von Rauchgasen stellt extreme Anforderungen an den jeweiligen Werkstoff. Durch die Unterschreitung des Saeuretaupunktes kommt es dabei zu einer Kondensation der Saeureprodukte auf den Heizflaechen. Die Auswahl des geeigneten Materials ist entscheidend fuer die Verfuegbarkeit der Gesamtanlage. In dem hier dargestellten Anwendungsfall konnte gezeigt werden, dass Nickelbasis-Legierungen hervorragend geeignet sind, einer derartigen Beanspruchung ueber Jahre hinaus standzuhalten. Unabhaengig hiervon gilt es jedoch, fuer die Materialauswahl jeden Anwendungsfall einzeln zu pruefen. (orig.)

Operators of distribution networks in the competitive markets of electricity and gas; Aufgaben des Netzbetreibers im liberalisierten Energiemarkt. IT-System fuer die Umsetzung der Pflichten des Netzbetreibers

Energy Technology Data Exchange (ETDEWEB)

Ohmen, S. [Stadtwerke Aachen AG (Germany)

2001-02-26

Stawag (Stadtwerke Aachen AG) is the operator of distribution networks for electricity, gas, water and district heating. In charge of this function Stawag is responsible for the complete handling of the third party access in the competitive markets of electricity and gas. In Germany the development of the background conditions for the third party access have been uncertain. In consequence the IT-market offers up to now no software solution comprehensing all the required functions. Stawag therefore decided to realize and work with an interim solution: Individual IT-systems interconnected by a modern Data-Warehouse platform for data exchange. (orig.) [German] Die Stadtwerke Aachen AG (Stawag) ist ein staedtisches Querverbundunternehmen und hat in der Funktion des Netzbetreibers im liberalisierten Energiemarkt die Aufgabe, die Vereilungsnetze fuer Strom und Gas diskriminierungsfrei allen Marktpartnern zur Verfuegung zu stellen. Bei der Einfuehrung der fuer die Abwicklung dieser Aufgabe erforderlichen IT-Systeme ging die Stawag einen Mittelweg zwischen Kauf und Implementierung einer Komplettloesung und weitgehend manueller Abwicklung mit MS-Office-Produkten. Mit Erfolg - wie die Erfahrungen der letzten Monate zeigen - vorerst auf der Stromseite. (orig.)

Heat tracing with flexible metal hoses. New calculation program for reliable and economic design; Begleitheizung mit flexiblen Metallschlaeuchen. Neues Berechnungsprogramm fuer zuverlaessige und wirtschaftliche Auslegung

Energy Technology Data Exchange (ETDEWEB)

Seeger, B. [Witzenmann GmbH, Pforzheim (Germany)

2003-07-01

Heat tracing does not only allow the transport of chocolate through pipe systems; particularly in chemical plants it ensures a stable viscosity of the transported media or protects it from freezing. By using flexible metal hoses instead of rigid copper or stainless steel pipes, the installation costs can be reduced considerably. Until now, no verified fundamental design principles or calculation programs for heat tracing with metal hoses were available. However, these are essential for a reliable and economical operation, as well as for a minimisation of the investment costs. Based on extensive field and laboratory measurements, a dedicated calculation model has now been established and verified. (orig.) [German] Begleitheizungen ermoeglichen nicht nur bei Schokolade den Transport durch Rohrleitungen. Vor allem in chemischen Anlagen erhalten sie die Viskositaet der transportierten Medien oder schuetzen gegen Einfrieren. Durch Verwendung von flexiblen Metallschlaeuchen anstelle von Glattrohren aus Kupfer oder Edelstahl laesst sich der Montageaufwand betraechtlich reduzieren. Fuer diese Metallschlauch-Begleitheizungen gab es bisher keine verifizierten Auslegungsgrundlagen oder Berechnungsprogramme. Fuer eine zuverlaessigen und wirtschaftlichen Betrieb sowie eine Minimierung der Investitionskosten sind diese jedoch unerlaesslich. Nun wurde auf der Basis umfangreicher Betriebs- und Labormessungen ein Berechnungsmodell erstellt und verifiziert. (orig.)

Safe and peaceful use of nuclear energy - an IAEA perspective. Address. Deutsche Gesellschaft fuer Auswaertige Politik, Bonn, 17 April 1998

International Nuclear Information System (INIS)

ElBaradei, M.

1998-01-01

The document reproduces the text of the conference given by the Director General of the IAEA at the Deutsche Gesellschaft fuer Auswaertige Politik in Bonn on 17 April 1998. After a presentation of the Agency's role in the safe and peaceful use of nuclear energy, the conference gives an overview of the main issues facing nuclear energy in the following three major areas: the contribution of nuclear energy to economic and social development, nuclear safety, and verification. In the last part, the Director General makes some comments about the future

Specification of a technically justified limiting value for sulphur concentrations in heating oil in order to enhance the use of high-efficiency boiler technology in oil heating systems; Ermittlung eines technisch begruendeten Grenzwertes fuer Schwefelgehalte im Heizoel zur Foerderung des Einsatzes von Brennwerttechnologie in Oelheizungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Bellingen, E.-M.; Kuechen, C. [Institut fuer Wirtschaftliche Oelheizung e.V., Hamburg (Germany); Haase, F.; Wilckens, H. [Deutsche Shell AG, Hamburg (Germany); Sinnen, H.D. [VEBA AG, Duesseldorf (Germany)

2002-04-01

Different oil condensing boilers, which were available on the German market, have been investigated in order to determine the relevant limit for sulphur content in domestic heating oil. Up to now, the condensate from oil condensing boilers has to be neutralized in many cases due to local legislation. The composition of the condensates from oil boilers came out to be similar to the condensate from gas condensing boilers, as long as the sulphur content of heating oil is below 100 mg/kg. As the neutralization of condensate from gas condensing boilers is usually not required up to 200 kW-boilers, there should be no technical reason for neutralization, as long as the sulphur content is below 100 mg/kg. However, boiler manufactures are convinced, that only if the sulphur content is as low as 50 mg/kg, it will be possible to develop reliable oil condensing boilers for a reasonable price. Calculations of the total energy consumption came to the result, that primary energy can be saved. The increase of efficiency on the boiler side has more influence than the energy needed for desulphurization. (orig.) [German] Zur Bestimmung eines technisch begruendeten Schwefelgrenzwertes fuer ein neues 'schwefelarmes' Heizoel EL wurden Untersuchungen mit Heizoelen unterschiedlichen Schwefelgehaltes an verschiedenen auf dem Markt verfuegbaren Oelbrennwertgeraeten durchgefuehrt. Zur Zeit wird durch das ATV Arbeitsblatt A-251 eine Neutralisation von Kondensaten aus Oelbrennwertanlagen gefordert. Die Untersuchungen zeigen, dass bei Schwefelgehalten unter 100 mg/kg die Kondensate aehnliche Zusammensetzungen aufweisen wie Kondensate aus Gasbrennwertgeraeten. Die Voraussetzung fuer eine Befreiung von der Neutralisationsverpflichtung bei der Verwendung dieser Brennstoffe ist damit aus technischer Sicht gegeben. Fuer die Entwicklung von neuen, kompakten und preiswerten Oelbrennwertgeraeten wird von der Heizgeraeteindustrie ein Schwefelgehalt von max. 50 mg/kg fuer notwendig gehalten

Open Hardware for CERN's accelerator control systems

International Nuclear Information System (INIS)

Bij, E van der; Serrano, J; Wlostowski, T; Cattin, M; Gousiou, E; Sanchez, P Alvarez; Boccardi, A; Voumard, N; Penacoba, G

2012-01-01

The accelerator control systems at CERN will be upgraded and many electronics modules such as analog and digital I/O, level converters and repeaters, serial links and timing modules are being redesigned. The new developments are based on the FPGA Mezzanine Card, PCI Express and VME64x standards while the Wishbone specification is used as a system on a chip bus. To attract partners, the projects are developed in an 'Open' fashion. Within this Open Hardware project new ways of working with industry are being evaluated and it has been proven that industry can be involved at all stages, from design to production and support.

CFD simulation of a particle loaded coolant flow in the sump and in the condensation chamber; Entwicklung von CFD-Modellen fuer Wandsieden und Entwicklung hchaufloesender, schneller Roentgentomographie fuer die Analyse von Zweiphasenstroemungen in Brennstabbuendeln

Energy Technology Data Exchange (ETDEWEB)

Krepper, Eckhard; Rzehak, Roland; Barthel, Frank; Franz, Ronald; Hampel, Uwe

2013-07-01

A collaborative project funded by the BMBF in the framework of the R and D program ''Energie 2020+'' by 4 Universities, 2 Research Centres and ANSYS was coordinated by Helmholtz- Zentrum Dresden-Rossendorf (HZDR). The present report describes the contributions of HZDR done from September 2009 to January 2013. The project was directed towards the development and validation of CFD models of boiling processes in PWR in the range from subcooled nucleate boiling up to the critical heat flux. The report describes the developed and used models. Main achievements were a comprehensive study of the boiling process itself and a better description of the interfacial area by coupling of wall boiling with a population balance model. The model extensions are validated and the present capabilities of CFD for wall boiling are investigated. By means of rod bundle experiments was shown that the measured cross sectional averaged values can be reproduced well with a single set of calibrated model parameters for different tests cases. For the reproduction of patterns of void distribution cross sections attention has to be focussed on the modelling of turbulence in the narrow channel. The experimental work was focussed on the investigation of the flow in a rod bundle. Using a rod bundle test rig the turbulent single phase flow field (PIV) and the average gas volume fraction (gamma densitometry) are measured. The timely and spatial resolved gas fraction was measured applying the ''High speed x-ray tomography'', developed in Rossendorf.

Digital control of the performance of reciprocating compressors in industrial refrigeration; Digitale Leistungsregelung fuer Hubkolbenverdichter in der Gewerbekaelte

Energy Technology Data Exchange (ETDEWEB)

Kaemmer, Norbert; Tomski, Thomas [Emerson Climate Technologies GmbH, Aachen (Germany); Majer, Igor [Emerson Climate Technologies s.r.o., Mikulov (Czech Republic)

2011-07-01

During the past few years, digital continuous control has become the primary control concept for scroll compressors. Recently, it has also been applied to reciprocating compressors. This is an interesting alternative to frequency converters and conventional systems and can also be combined with these. In a test facility that simulates a supermarket, various combinations of output-regulated reciprocating compressors were investigated. The refrigeration performance, electric power consumption and other data were recorded for different stationary load states. The experimental set-up, plant parameters and first results are presented in the contribution. Reliable quality data are not available as yet. Intended further investigations and improvements in the experimental set-up are gone into. [German] Im Bereich der Scrollverdichter hat sich in den letzten Jahren bei Verfluessigungssaetzen und kleineren Verbundanlagen die digitale stufenlose Leistungsregelung etabliert. In diesem Segment kann die Technologie ihre Vorzuege, Einfachheit und geringe zusaetzliche installierte Kosten bezogen auf das Gesamtsystem, am Besten ausspielen. Die digitale Regelung ist nun auch fuer Hubkolbenverdichter verfuegbar. Einerseits bietet sie eine interessante Alternative zu Frequenzumrichtern und herkoemmlichen Entlastungssystemen. Andererseits kann sie auch in Kombination mit diesen Technologien eingesetzt werden. In einer Versuchsanlage, die einen Supermarkt simuliert, wurden verschiedene Kombinationsmoeglichkeiten von leistungsgeregelten Hubkolbenverdichtern untersucht. Dazu wurden fuer verschiedene stationaere Lastzustaende die Kaelteleistung, die elektrische Leistungsaufnahme und andere Anlagenwerte erfasst. Die Versuchsanlage, die untersuchten Anlagenparameter und erste Messergebnisse werden dargestellt. Da die Versuchsanlage und der Versuchsbetrieb noch nicht seinen endgueltigen Reifegrad erreicht hat, koennen noch keine verlaesslichen Anlagenguetegrade vorgestellt werden. Es wird

Optimization of environment compatible analysis methods for mineral hydrocarbons in the soil; Optimierung umweltvertraeglicher Analysenverfahren fuer Mineraloelkohlenwasserstoffe im Boden

Energy Technology Data Exchange (ETDEWEB)

Flachowsky, J.; Borsdorf, H. [eds.] [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Leipzig (Germany); Loehmannsroeben, H.G.; Roch, T. [Erlangen-Nuernberg Univ., Erlangen (Germany); Leopom, P. [Umweltbundesamt, Berlin (Germany); Reimers, C. [Technische Univ. Hamburg-Harburg, Hamburg (Germany); Matz, G.; Kuebler, J. [MOBILAB GmbH, Hamburg (Germany); Christall, B. [SOFIA GmbH, Berlin (Germany); Hahn, M.; Matschiner, H. [Elektrochemie Halle GmbH (Germany); Baermann, A. [Dr. Baermann und Partner Mikroanalytik, Hamburg (Germany)

1997-12-31

This paper describes several analytical methods for the quantitative chemical analysis of mineral oil hydrocarbons in soils. The measuring methods are investigated on accuracy, errors, sample preparation methods, analysis of reference materials and real materials. (SR) [Deutsch] Mit dieser Schrift praesentiert die Deutsche Bundesstiftung Umwelt der Oeffentlichkeit Ergebnisse zu alternativen umweltvertraeglichen Bestimmungsmethoden fuer Mineraloelkohlenwasserstoffe in Boeden. Es war in erster Linie das Ziel aller beteiligten Forscher und Entwickler, die heute noch in der Anwendung befindliche Vorschrift nach DIN 38409 H18 zur Analytik von Mineraloelkohlenwasserstoffen durch eine sowohl umweltfreundliche als auch insgesamt aussagekraeftige Methode zu substituieren. (orig.)

Combining monoenergetic extrapolations from dual-energy CT with iterative reconstructions. Reduction of coil and clip artifacts from intracranial aneurysm therapy

Energy Technology Data Exchange (ETDEWEB)

Winklhofer, Sebastian; Baltsavias, Gerasimos; Michels, Lars; Valavanis, Antonios [University of Zurich, Department of Neuroradiology, University Hospital Zurich, Zurich (Switzerland); Hinzpeter, Ricarda; Stocker, Daniel; Alkadhi, Hatem [University of Zurich, Institute of Diagnostic and Interventional Radiology, University Hospital Zurich, Zurich (Switzerland); Burkhardt, Jan-Karl; Regli, Luca [University of Zurich, Department of Neurosurgery, University Hospital Zurich, Zurich (Switzerland)

2018-03-15

To compare and to combine iterative metal artifact reduction (MAR) and virtual monoenergetic extrapolations (VMEs) from dual-energy computed tomography (DECT) for reducing metal artifacts from intracranial clips and coils. Fourteen clips and six coils were scanned in a phantom model with DECT at 100 and 150SnkVp. Four datasets were reconstructed: non-corrected images (filtered-back projection), iterative MAR, VME from DECT at 120 keV, and combined iterative MAR + VME images. Artifact severity scores and visibility of simulated, contrast-filled, adjacent vessels were assessed qualitatively and quantitatively by two independent, blinded readers. Iterative MAR, VME, and combined iterative MAR + VME resulted in a significant reduction of qualitative (p < 0.001) and quantitative clip artifacts (p < 0.005) and improved the visibility of adjacent vessels (p < 0.05) compared to non-corrected images, with lowest artifact scores found in combined iterative MAR + VME images. Titanium clips demonstrated less artifacts than Phynox clips (p < 0.05), and artifact scores increased with clip size. Coil artifacts increased with coil size but were reducible when applying iterative MAR + VME compared to non-corrected images. However, no technique improved the severe artifacts from large, densely packed coils. Combining iterative MAR with VME allows for an improved metal artifact reduction from clips and smaller, loosely packed coils. Limited value was found for large and densely packed coils. (orig.)

Relativitätstheorie ein Sachcomic

CERN Document Server

Bassett, Bruce

2012-01-01

E = mc² – so einfach ist eine Revolution! Nichts ist schneller als Licht! Wie lange noch? Was fangen wir mit einer vierten Dimension an und mit krummen Räumen? Einstein gilt als größter Physiker der Neuzeit, das amerikanische Magazin „Time“ machte ihn sogar zum Mann des Jahrhunderts. Einstein ist das Lieblingsgenie vieler Menschen: ein Radikaler im wissenschaftlichen Arbeiten und engagierter sozialistischer Pazifist. Es ist nun gut hundert Jahre her, seit Einsteins Relativitätstheorie unseren Blick auf Raum, Zeit und Materie revolutionierte. Einsteins Gedankenexperimente sind berüchtigt für ihre Komplexität, aber sie bieten fesselnde Beschreibungen der Grundlagen, auf denen die Welt funktioniert. Relativitätstheorie und Quantentheorie sind die zwei Hauptsäulen der modernen Physik. Dieser Sachcomic nimmt Sie mit auf eine unterhaltsame Bildungsreise durch Raum und Zeit vorbei an Schwarzen Löchern und quer durch Gravitationsfelder (Je schneller Sie lesen, desto jünger werden Sie!!). Sie werden ...

Screening of additives for the production of ice pulp for application in normal cooling and freezing; Screening von Zusatzstoffen zur Herstellung von Eisbrei fuer die NK-/TK-Anwendung

Energy Technology Data Exchange (ETDEWEB)

Ruebeling, Jascha; Eiseler, Jens [Hochschule Karlsruhe - Technik und Wirtschaft (Germany). Inst. fuer Kaelte-, Klima- und Umwelttechnik

2011-07-01

The project investigated non-toxic additives for production of ice slurry. Ice slurry is an environment-friendly refrigerant that is increasingly used as a substitute for conventional refrigerants. In view of rising energy prices and an impending tax on climate-relevant refrigerants, ice slurry may soon be used for chilling of food in supermarkets. For this, ice slurry of about 0 C is required for normal cooling and of about -25 C for deep freezing. A very fine-grained, pumpable ice slurry is obtained with glucose as an additive, or with sodium chloride in eutectic concentration with small amounts of ethanol for deep freezing. Ethanol will refine the coarse crystal structure of the eutectic sodium chloride / water mixture and will also reduce the freezing point. Further, the method of primary crystallisation on a crystallised additive was developed. An industrial plant working by this principle will have less disturbances and wear during ice slurry production. [German] Die Projektarbeit befasste sich mit der Untersuchung lebensmittelvertraeglicher Additive zur Herstellung von Eisbrei. Eisbrei gilt als umweltfreundlicher Kaeltetraeger, der zunehmend in verschiedenen Bereichen zur Anwendung kommt und herkoemmliche Kaeltemittel ersetzen kann. Aufgrund steigender Energiekosten sowie einer eventuell anstehenden Besteuerung treibhauswirksamer Kaeltemittel, kann Eisbrei zukuenftig zur Kuehlung von Lebensmitteln in Supermaerkten verwendet werden. Dazu wird Eisbrei mit ca. 0 C fuer die Normalkuehlung, beziehungsweise mit ca. -25 C fuer die Tiefkuehlung benoetigt. Mit Glucose als Zusatzstoff laesst sich ein sehr feinkoerniger und damit pumpbarer Eisbrei fuer die Normalkuehlung erzeugen. Bei der Tiefkuehlung ist Natriumchlorid in einer eutektischen Konzentration mit geringen Mengen Ethanol empfehlenswert. Ethanol verfeinert die grobe Kristallstruktur des reinen eutektischen Natriumchlorid-Wasser-Gemisches und senkt den Gefrierpunkt. Des Weiteren wurde das Verfahren der

Intensity-modulated proton therapy, volumetric-modulated arc therapy, and 3D conformal radiotherapy in anaplastic astrocytoma and glioblastoma. A dosimetric comparison

Energy Technology Data Exchange (ETDEWEB)

Adeberg, S.; Debus, J. [Heidelberg Institute of Radiation Oncology (HIRO), Heidelberg (Germany); Heidelberg Ion-Beam Therapy Center (HIT), Heidelberg (Germany); University Hospital Heidelberg, Department of Radiation Oncology, Heidelberg (Germany); German Cancer Research Center (DKFZ), Clinical Cooperation Unit Radiation Oncology, Heidelberg (Germany); Harrabi, S.B.; Bougatf, N.; Rieber, J.; Koerber, S.A.; Herfarth, K.; Rieken, S. [Heidelberg Institute of Radiation Oncology (HIRO), Heidelberg (Germany); Heidelberg Ion-Beam Therapy Center (HIT), Heidelberg (Germany); University Hospital Heidelberg, Department of Radiation Oncology, Heidelberg (Germany); Bernhardt, D.; Syed, M.; Sprave, T.; Mohr, A. [Heidelberg Institute of Radiation Oncology (HIRO), Heidelberg (Germany); University Hospital Heidelberg, Department of Radiation Oncology, Heidelberg (Germany); Abdollahi, A. [University Hospital Heidelberg, Department of Radiation Oncology, Heidelberg (Germany); Haberer, T. [Heidelberg Institute of Radiation Oncology (HIRO), Heidelberg (Germany); Heidelberg Ion-Beam Therapy Center (HIT), Heidelberg (Germany); Combs, S.E. [Technische Universitaet Muenchen, Department of Radiation Oncology, Muenchen (Germany); Helmholtz Zentrum Muenchen, Institut fuer Innovative Radiotherapie (iRT), Department of Radiation Sciences (DRS), Neuherberg (Germany)

2016-11-15

The prognosis for high-grade glioma (HGG) patients is poor; thus, treatment-related side effects need to be minimized to conserve quality of life and functionality. Advanced techniques such as proton radiation therapy (PRT) and volumetric-modulated arc therapy (VMAT) may potentially further reduce the frequency and severity of radiogenic impairment. We retrospectively assessed 12 HGG patients who had undergone postoperative intensity-modulated proton therapy (IMPT). VMAT and 3D conformal radiotherapy (3D-CRT) plans were generated and optimized for comparison after contouring crucial neuronal structures important for neurogenesis and neurocognitive function. Integral dose (ID), homogeneity index (HI), and inhomogeneity coefficient (IC) were calculated from dose statistics. Toxicity data were evaluated. Target volume coverage was comparable for all three modalities. Compared to 3D-CRT and VMAT, PRT showed statistically significant reductions (p < 0.05) in mean dose to whole brain (-20.2 %, -22.7 %); supratentorial (-14.2 %, -20,8 %) and infratentorial (-91.0 %, -77.0 %) regions; brainstem (-67.6 %, -28.1 %); pituitary gland (-52.9 %, -52.5 %); contralateral hippocampus (-98.9 %, -98.7 %); and contralateral subventricular zone (-62.7 %, -66.7 %, respectively). Fatigue (91.7 %), radiation dermatitis (75.0 %), focal alopecia (100.0 %), nausea (41.7 %), cephalgia (58.3 %), and transient cerebral edema (16.7 %) were the most common acute toxicities. Essential dose reduction while maintaining equal target volume coverage was observed using PRT, particularly in contralaterally located critical neuronal structures, areas of neurogenesis, and structures of neurocognitive functions. These findings were supported by preliminary clinical results confirming the safety and feasibility of PRT in HGG. (orig.) [German] Die Prognose bei ''High-grade''-Gliomen (HGG) ist infaust. Gerade bei diesen Patienten sollten therapieassoziierte Nebenwirkungen minimiert werden

Financial plans for thermal waste treatment plants; Finanzierungsmodelle fuer thermische Abfallbehandlungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Soehndel, B. [Zweckverband Restmuellheizkraftwerk, Boeblingen (Germany); Faulstich, M. [Technische Univ. Muenchen, Garching (Germany). Lehrstuhl fuer Wasserguete- und Abfallwirtschaft

1998-09-01

There are various financing and organisation models in use at German waste treatment plants. These models have an influence on capital costs as well as on operating costs. The great variety of existing models, which is not only found in theory but also in practice, is a sure indication that there is no universal solution at present but that models always have to be adapted to the current conditions governing the plant in question (e.g., tax law amendments). In view of the great complexity of this subject the following deliberations will be restricted to only the best-known types of financing model. [Deutsch] Fuer den Betrieb von Abfallbehandlungsanlagen gibt es bundesweit verschiedene Organisations- und Finanzierungsmodelle. Diese Modelle haben Auswirkungen auf die Kapitalkosten und die Betriebskosten. Die Vielfalt der nicht nur theoretisch moeglichen, sondern auch der in der Praxis existierenden Modelle ist mit Sicherheit ein Hinweis, dass derzeit keine universelle Loesung moeglich ist, sondern diese immer den aktuellen und spezifischen Verhaeltnissen (z.B. Steuerrechtsaenderung u.a.) angepasst werden muss. Auf Grund der Komplexibilitaet beschraenken sich die nachfolgenden Ausfuehrungen ausschliesslich auf die bekanntesten Formen der Finanzierungsmodelle. (orig./SR)

Country-wide survey on the effects of emissions using bioindicators. Recommendation of Arbeitskreis ``Bioindikation/Wirkungsermittlung`` der Landesaemter/-anstalten fuer Umweltschutz; Landesweite Erhebung von Immissionswirkungen mit Bioindikatoren. Empfehlung des Arbeitskreises ``Bioindikation/Wirkungsermittlung`` der Landesaemter/-anstalten fuer Umweltschutz

Energy Technology Data Exchange (ETDEWEB)

Peichl, L. [Bayerisches Landesamt fuer Umweltschutz, Muenchen (Germany).

1997-09-01

The working group on `boindication/assessment of effects` is made up of specialists active in the fields of bioindication and emission ecology for the German Federal administrative offices concerned with the protection of the environment and for the German Environmental Protection Agency. In April 1996, this working group adopted the recommendation for a `country-wide survey on the effects of emissions using bioindicatiors`. The goal of this national survey is to determine the geographic distribution and the development over time of such emissions, as well as to document the effects of background emissions. In order to achieve these goals, the development of national measuring networks and permanent observation stations is mandatory. A minimal demand of investigations and of investigative procedures is required in order to compare the results of the individual Federal States and to consequently combine these findings as an overall picture for the entire Federal Republic of Germany. Mosses and lichens are recommended for passive biological monitoring, while standardized grass cultures, kale, stringing nettle and tobacco are suggested for active biomonitoring. In addition, detailed methodical recommendations concerning the use of standardized grass cultures and kale are discussed. (orig.) [Deutsch] Der Arbeitskreis `Bioindikation/Wirkungsermittlung` setzt sich aus Fachleuten der Bioindikation und Immissionsoekologie der Landesaemter und -anstalten fuer Umweltschutz und des Umweltbundesamtes zusammen. Im April 1996 wurde vom Arbeitskreis die Empfehlung `Landesweite Erhebung von Immissionswirkungen mit Bioindikatoren` verabschiedet. Ziele der landesweiten Erfassung von Immissionswirkungen mit Bioindikatoren sind die Ermittlung ihrer geographischen Verteilung und zeitlichen Entwicklung und der Hintergrund-Immissionswirkungen. Zur Verfolgung dieser Ziele ist die Einrichtung von landesweiten Messnetzen und Dauerbeobachtungsstationen notwendig. Um Untersuchungen der

HGR: Flow models, dust cake and cleaning models for hot flue gas filters. Project part: Design, flow regimes and cleaning of dust cakes at high temperatures. Final report; HGR: Stroemungs-, Filterkuchen- und Abreinigungsmodelle fuer Heissgasfilter. Teilprojekt: Aufbau, Durchstroemung und Abreinigung von Filterkuchen bei hohen Temperaturen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Hemmer, G.

1998-12-31

As separators for the dedusting of hot flue gases from pressurized coal combustion or from product gases of coal gasification there are in principle filtration and centrifugal force and electrical separators. In this project bases shall be determined for methods of interpretation, carcateristic quantities and guide values for the hot gas filtration. As primary sizes for the interpretation to filter plants the pressure drop of dust cakes and filter elements on one hand and the forces necessary for regeneration on the other hand are of fundamental importance. Measurements were carried out at a high temperature filtration unit and at a laboratory filter plant and completed at a high temperature shear cell and a dilatometer. It was shown that the material composition of the dusts has a very decisive influence. Furthermore, the relative humidity has a considerable influence at ambient temperature. Aims of further examinations should therefore be the quantification of the material influences and the meaning of water vapour at high temperatures in order to be able to develop methods of interpretation for hot gas filters. (orig.) [Deutsch] Als Abscheideprinzipien fuer die Entstaubung von heissen Rauchgasen aus der Kohledruckverbrennung oder von Produktgasen aus der Kohlevergasung kommen Filtrations-, Fliehkraft- und elektrische Abscheider in Frage. In diesem Projekt sollen fuer die Heissgasfiltration Grundlagen fuer die Auslegungsmethoden, Kenngroessen und Richtwerte ermittelt werden. Als Primaergroessen fuer die Auslegung von Filteranlagen sind der Druckverlust von Staubkuchen und Filterelement einerseits und die zur Abreinigung noetige Abreinigungsintensitaet andererseits einzuschaetzen. Dabei wurden Messungen an einer Hochtemperaturfiltrationsanlage und einer Laborfilteranlage durchgefuehrt und durch Untersuchungen an einer Hochtemperaturscherzelle und einem Dilatometer ergaenzt. Es zeigte sich, dass die stoffliche Zusammensetzung der Staeube einen sehr entscheidenden

Arbeitsgemeinschaft fuer die Reinhaltung der Elbe - selected organic trace pollutants in the Elbe and its tributaries 1994-1999; Arbeitsgemeinschaft fuer die Reinhaltung der Elbe - Ausgewaehlte organische Spurenverunreinigungen in der Elbe und Elbenebenfluessen im Zeitraum 1994 - 1999

Energy Technology Data Exchange (ETDEWEB)

Fooken, C.; Stachel, B.; Reincke, H. [Wasserguetestelle Elbe, Hamburg (Germany)

2000-10-01

The present report contains results on the occurrence of polar and nonpolar substances in the Elbe and selected tributaries which were analysed in the period from 1994 to 1999. It shows that industrial and municipal purification plants still have an insufficient cleaning capacity for certain substances. The process by which ubiquitous pollutants can enter the Elbe via a small, widely ramified fluvial system is exemplified for the family of chloroalkyl phosphates. These mainly occur in flame retardants and plasticisers in polyurethanes. The paper also presents results from a selection of 28 substances listed in Directive 76/464/ECC. They provide a decision aid for the planning of future measuring concepts based on the EU Water Framework Directive. In the ARGE ELBE programme organic pollutants are recorded and published on a routine basis. These are mostly nonpolar substances such as the well-known polychlorinated biphenyls or slow-evaporating insecticidal chlorinated hydrocarbons such as DTT. Recent analysis results show that this group of substances is relevant now as before and that it will remain so for the years to come. Special studies involving aqueous phase measurements were performed on a different group of substances, namely polar substances, which are generally readily soluble. The substances on which this report is chiefly focused originate from different sources: industrial and municipal effluents, diffuse inputs from agriculture and atmospheric depositions. In many cases they are difficultly degradable and could attain significance where river water in the form of river bank filtrate is used for drinking water production. However, due to complex and effective purification technologies they rarely enter drinking water. [German] Der vorliegende Bericht enthaelt Ergebnisse zum Vorkommen polarer und unpolarer Stoffe in der Elbe und in ausgewaehlten Nebenfluessen, die in dem Zeitraum von 1994 bis 1999 analysiert worden sind. Er zeigt, dass fuer einzelne

Development of ecological and economical super-insulations for various applications. Subproject 1: scientific development of ecological super-insulations for industrial application. Subproject 2: experimental synthesis and development of a pilot plant for continuously production and realisation of multilayer-insulation materials. Final report; Entwicklung oekologischer und wirtschaftlicher Super-Isolationen fuer vielfaeltige Anwendungen. Teilvorhaben 1: Wissenschaftliche Entwicklung oekologischer Super-Isolationen fuer industrielle Anwendungen. Teilvorhaben 2: Experimentelle Struktursynthese und Entwicklung einer Technikumsanlage zur kontinuierlichen Herstellung von Mehrschicht-Daemmstoffen. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Offermann, P.; Freudenberg, C.; Schenk, A.; Doerfel, A.; Hoffmann, G.; Roedel, H.; Schierz, C.; Hopf, W.

2002-07-01

deliverables. A precondition for this is the continued work and the successful combination of the present solutions with new innovative materials. (orig.) [German] Waermedaemmstoffe finden in unterschiedlichen Bereichen, aus denen ihre speziellen Aufgaben resultieren, Anwendung. Materialien wie Daemmstoffe aus Mineralfasern und Schaumkunststoffe werden im Bauwesen und fuer die Industriedaemmung eingesetzt. Waermedaemmstoffe aus natuerlichen Rohstoffen finden, wenn auch nur begrenzt, im Bauwesen Anwendung. Im Bekleidungsbereich werden neben Vliesstoffen aus synthetischen Polymeren oder Schafwolle besonders im out-door-Bereich gestrickte Fleece verwendet. Die Zielstellung des Projektes besteht in der Entwicklung eines Daemmmaterials mit sehr geringer Waermeleitfaehigkeit bei sehr geringer Dichte sowie hohen Freiheitsgraden hinsichtlich der Struktur- und Stoffparameter. Die Umsetzung erfolgt mit dem Verfahren der elektrostatischen Beflockung. Es wird ein Rechenmodell zur Ermittlung optimaler Strukturen hinsichtlich Waermeleitfaehigkeit und Dichte erstellt. Im Anschluss an eine anforderungsgerechte Materialauswahl werden praktische Untersuchungen zur Wirkungsweise des Materials durchgefuehrt. Es wird eine Technikumsanlage zur kontinuierlichen Herstellung des Materials installiert und erprobt. Das Ergebnis des Projektes besteht in einer sehr variablen gestaltbaren Daemmstoffstruktur mit hervorragenden Eigenschaften. Das entwickelte Material wird als Super-Isolations-Flock-Daemmstoff bezeichnet. Bei definierten Strukturbedingungen und entsprechender Materialauswahl koennen Werte fuer die Waermleitfaehigkeit im Bereich von 0,027 W/mK und 0,030 W/mK erreicht werden. Die Dichte fuer derartige Strukturen liegt im Bereich zwischen 10 kg/m{sup 3} und 20 kg/m{sup 3}. Fuer Anwendungsbeispiele ohne hohen mechanische Anforderunge koennen Strukturen mit einer Dichte von ca. 7 kg/m{sup 3} erzielt werden. Der Super-Isolations-Flock-Daemmstoff findet im Bekleidungsbereich sowie im technischen

Electric power in the competitive market - Investing capital for cleaner energy generation still a rewarding business? New perspectives for electrical energy efficiency improvement, the cogeneration technology, and renewable energy generation; Strom im Wettbewerb - Lohnen sich Investitionen in saubere Energien noch? Neue Perspektiven fuer effiziente Stromnutzung, Kraft-Waerme-Kopplung und Erneuerbare Energien. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Schwanhold, E. [comp.

2000-07-01

The meeting gathered policymakers, members of the energy industry, the business consulting professions, and scientific institutes and relevant technology companies. New perspectives have been discussed in the context of required framework conditions and processes that have to/can be put in place, or further developed, in order to create a concrete basis or stronger incentives for realisation of climate protection and environmental policy goals in the energy sector. There have been two panel discussions on the issue of whether investing in clean generation technologies will be rewarding. Five papers each presented to these panels have been analysed and prepared for separate retrieval from the database, as well as five papers each of the discussion forum A, ''New perspectives for energy efficiency measures and contracting partnerships'', and the discussion forum B, ''New perspectives for distributed power generation with CHP systems''. From the discussion forum C, ''New perspectives for renewable energy sources'', one paper has been prepared for separate retrieval. (CB) [German] Die Tagung war eine Diskussionsplattform fuer Teilnehmer aus den Bereichen Politik, Energiewirtschaft und wirtschaftsberatende Berufe, Forschungsinstitute und Technologieunternehmen. Neue Perspektiven wurden diskutiert im Zusammenhang mit den Rahmenbedingungen und Moeglichkeiten, die entwickelt oder verstaerkt werden koennen/muessen, um eine konkrete Basis oder staerkere Anreize zur Verwirklichung der Ziele der Klima- und Umweltschutzpolitik in der Energiewirtschaft zu schaffen. Es gab ein Diskussionsforum zur Frage der Wirtschaftlichkeit von Investitionen in saubere Energieerzeugungstechnologien und Energieeffizienz, hiervon wurden 5 Beitraege als Einzelaufnahmen in die Datenbank aufgenommen. Ebenfalls vom Forum A, ''Neue Perspektiven fuer Stromeinsparung und Contracting'', und Forum B, &apos

German S3 guideline for renal cell carcinoma. Presentation and discussion of essential aspects for the radiation oncologist; Die deutsche S3-Leitlinie zum Nierenzellkarzinom. Darstellung und Diskussion wesentlicher Aspekte fuer den Radioonkologen

Energy Technology Data Exchange (ETDEWEB)

Mueller, Arndt-Christian [Eberhard Karls University, Department of Radiation Oncology, Tuebingen (Germany); Oorschot, Birgitt van [Julius Maximilians University, Department of Radiation Oncology, Wuerzburg (Germany); Micke, Oliver [Franziskus Hospital Bielefeld, Department of Radiotherapy and Radiation Oncology, Bielefeld (Germany); Guckenberger, Matthias [University of Zurich, Department of Radiation Oncology, Zuerich (Switzerland)

2018-01-15

We aim to introduce and discuss the statements and recommendations of the German S3 guideline on renal cell cancer for daily practice of radiation oncologists. This report comprises indication, treatment decision, dose prescription and current literature including treatment of oligometastatic disease. According to different stages of the disease and the structure of the guideline we focus on five treatment situations and recommendations for decision making: (1) Neo-/adjuvant treatment before or after nephrectomy: No indication for radiotherapy. (2) Small renal mass: Stereotactic ablative radiotherapy is currently seen as experimental option due to small patient numbers reported in the literature. However, local tumor control achieved by SBRT appears favourable with >90% at 2 years. (3) Oligometastasis: Radiation treatment with higher local doses or stereotactic treatment is possible after interdisciplinary discussion. Indications for palliative (4) and symptomatic treatment (5) are not different compared to other tumor entities. Currently, there is no evidence-based indication for radiation treatment in the primary setting (adjuvant/neoadjuvant or definitive) of renal cell cancer. In the future stereotactic radiotherapy should have a stronger role in the treatment of medically inoperable patients with primary renal cell cancer and especially in the setting of oligometastasis. (orig.) [German] Ziel dieser Arbeit ist es, dem Radioonkologen die Empfehlungen und Diskussionswege der neuen S3-Leitlinie zum Nierenzellkarzinom fuer die taegliche Praxis pointiert darzustellen. Es werden Indikationsstellung, Dosisverschreibung, technische Durchfuehrung sowie aktuelle Literatur fuer den Strahlentherapeuten, vor allem mit Fokus auf die Behandlung der Oligometastasierung, zusammengefasst. Entsprechend der unterschiedlichen Erkrankungsstadien und der Gliederung der Leitlinie werden fuenf radiotherapeutische Therapiesituationen und die Empfehlungen dazu vorgestellt: (1

Novel, energy-optimized membrane design for biological waste water treatment systems; Ein neuentwickeltes Niedrig-Energie-Membransystem fuer Membran-Biologien

Energy Technology Data Exchange (ETDEWEB)

Luebbecke, S. [Preussag Wassertechnik GmbH, Bremen (Germany)

1999-07-01

In industrial waste water treatment, circular movement of waste water, scarcity of space for erecting waste water treatment plants, and economy are factors of eminent importance, calling for innovative, efficient process techniques. Up to now, separation of activated sludge from cleaned waste water has been done almost exclusively by means of sedimentation. But because of the slight difference in density between water and biomass, large final sedimentation tanks are indispensable, and attainable biomass concentrations in an activated sludge tank (or bioreactor) are low (3-4g/l). Given that cleaning performance is directly proportional to biomass concentration, achieving higher biomass concentrations spells substantially enhanced efficiency per unit of space of biological systems, thus saving reaction volume. For this task, membrane techniques are suitable, which, contrary to sedimentation, permit random-selection, operationally stable retention and concentration of biomass with a definitely smaller space requirement. (orig.) [German] Bei der industriellen Abwasserbehandlung stehen die Kreislauffuehrung des Abwassers, beengte Platzverhaeltnisse fuer die Errichtung von Abwasserbehandlungsanlagen und die Wirtschaftlichkeit im Vordergrund, so dass dort innovative, effiziente Verfahrenstechniken gefragt sind. Zur Abtrennung des Belebtschlammes vom gereinigten Abwasser wird bisher fast ausschliesslich die Sedimentation eingesetzt. Der geringe Dichteunterschied zwischen Wasser und Biomasse macht jedoch grosse Nachklaerbecken notwendig und die erreichbaren Biomassekonzentrationen im Belebungsbecken (bzw. Bioreaktor) sind gering (3-4 g/l). Da die Reinigungsleistung der Biomassekonzentration direkt proportional ist, kann mit der Einstellung hoeherer Biomassekonzentrationen die Raumumsatzleistung biologischer Systeme erheblich gesteigert und somit Reaktionsvolumen eingespart werden. Fuer diese Aufgabe koennen Membranverfahren eingesetzt werden, die im Gegensatz zur

Stabilisation goals for concentrations of climate-relevant gaseous emissions: Effects and emission pathways. Final report; Stabilisierungsziele fuer Treibhausgaskonzentrationen: Eine Abschaetzung der Auswirkungen und der Emissionspfade. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Onigkeit, J.; Alcamo, J.; Kaspar, F.; Roesch, T.

2000-04-01

beruecksichtigt. Neben einer Untersuchung der Reduktionsmassnahmen, die auf globaler Ebene notwendig sind, wurde ein Ansatz entwickelt, um die globalen Reduktionslasten auf Annex B und Nicht-Annex B Laender zu verteilen. Um ein Stabilisierungsziel von 550 ppm CO{sub 2} in der Atmosphaere zu erreichen, duerfen die jaehrlichen globalen anthropogenen CO{sub 2} aequivalenten Emissionen zwar bis 2030 leicht ansteigen, muessen aber bis 2100 auf das Emissionsniveau von 1990 zurueckkehren. Fuer das 450 ppm Ziel ist bis 2100 sogar eine Reduktion auf die Haelfte der Emissionen von 1990 notwendig. Es wurden die Konsequenzen des Klimawandels fuer die landwirtschaftliche Produktivitaet, fuer die natuerliche Vegetation, die Wasserverfuegbarkeit und das Meeresspiegelniveau untersucht. Auch die Auswirkungen regional unterschiedlicher SO{sub 2} Emissionen wurden beruecksichtigt. Trotz umfangreicher Emissionskontrollen ist fuer beide Stabilisierungsziele mit einer schnellen Zunahme der Flaeche mit zurueckgehender landwirtschaftlicher Produktivitaet und mit einer Gefaehrdung der natuerlichen Vegetation zu rechnen. Die Hoehe der Auswirkungen variiert jedoch stark von Region zu Region. (orig.)

RHIC beam loss monitor system design

International Nuclear Information System (INIS)

Witkover, R.; Zitvogel, E.; Michnoff, R.

1997-01-01

The Beam Loss Monitor (BLM) System is designed to prevent the quenching of RHIC magnets due to beam loss, provide quantitative loss data, and the loss history in the event of a beam abort. The system uses 400 ion chambers of a modified Tevatron design. To satisfy fast (single turn) and slow (100 msec) loss beam criteria and provide sensitivity for studies measurements, a range of over 8 decades is needed. An RC pre-integrator reduces the dynamic range for a low current amplifier. This is digitized for data logging. The output is also applied to an analog multiplier which compensates the energy dependence, extending the range of the abort comparators. High and low pass filters separate the signal to dual comparators with independent programmable trip levels. Up to 64 channels, on 8 VME boards, are controlled by a micro-controller based VME module, decoupling it from the front-end computer (FEC) for real-time operation. Results with the detectors in the RHIC Sextant Test and the electronics in the AGS-to-RHIC (AtR) transfer line will be presented

The data acquisition of the Micromegas detector for the CAST experiment

CERN Document Server

Geralis, T; Giomataris, Ioanis; Zachariadou, K

2004-01-01

The Micromegas ( mu M) detector is one of the three types of detectors (CCD, mu M and TPC) that are used for solar axion detection at the CAST experiment. The mu M detector is sensitive to X-rays, originating from a conversion of axion to photon in a strong magnetic field (9T), in the range of a few hundred eV to 10 keV. Good detection efficiency, energy resolution, spatial resolution and extremely low background are the characteristics of this type of detector. The Data Acquisition of the Micromegas detector is presented here. The Front End cards are using multiplexed analog integrated circuits. A set of VME modules performs the readout that is expandable to read up to 2 * 19 * 2048 (77824) channels. The system has the capability to apply online, per individual channel, a threshold and a subsequent pedestal subtraction. At the CAST experiment rates the dead time is negligible. A PCI-MXI2-VME interface is used to read out the data to a PC, to perform monitoring and to Display Events. The system is based on th...

The COSY control system, a distributed realtime operating system: First practical experience at the COSY-injector

International Nuclear Information System (INIS)

Stephan, M.; Hacker, U.; Henn, K.; Richert, A.; Sobotta, K.; Weinert, A.

1991-01-01

The COSY control system is hierarchically organized with distributed intelligence and autonomous processing units for dedicated components. Data communication is performed via LAN and over a fieldbus. The hostsystems are UNIX-based, whereas the field-controllers are running a modular realtime operating-system RT/OS which has been developed at KFA. The computer-hardware consists of RISC mini computers, VME-computers in the field and G64 equipment-control-module in geographical expansion of the controller by a fieldbus based on the PDV-standard. The man-machine interface consists of X-window based work stations. On top of X-window a graphical user interface based on object oriented methods is used. A distributed realtime data base allows access to the accelerator state from every workstation. A special highlevel language debugger hosted on the UNIX based workstation and connected over LAN to the VME targets will be used. Together with the software development system for UNIX applications an uniform view of the system appears to the programmer. First practical experience at the COSY injector is presented

Structure, design and statistical programme library of the meteorological database of Potsdam-Institut fuer Klimaforschung; Struktur, Aufbau und statistische Programmbibliothek der meteorologischen Datenbank am Potsdam-Institut fuer Klimaforschung

Energy Technology Data Exchange (ETDEWEB)

Oesterle, H.; Glauer, J. [Potsdam-Institut fuer Klimafolgenforschung (PIK), Potsdam (Germany); Denhard, M. [Frankfurt Univ. (Germany). Inst. fuer Meteorologie und Geophysik

1999-01-01

The relational database management system (ORACLE) using different client interfaces (browser, SQL, precompiler) is the most important basis for data organization and storage. The creation of a data bank system at PIK includes: Acquisition of meteorological data series for the projects executed at PIK; development of a database structure on the basis of daily values; control, analysis and classification of data into given storage formats; development and application of statistical software. There are currently 20 different types of data sets with daily, monthly and annual data which are functionally interconnected and updated. All data sets are continuously updated. (orig.) [Deutsch] Wesentliche Grundlage der Datenorganisation und -speicherung bildet das relationale Datenbanksystem ORACLE mit den dazugehoerigen Werkzeugen (Browser, SQL- und Precompiler). Die Entwicklung des Datenbanksystems am PIK umfasst folgende Etappen: - Erwerb von meteorologischen Datensaetzen fuer die am Institut laufenden Forschungsvorhaben; - Entwicklung einer Speicherstruktur auf der Basis von Tageswerten; - Kontrolle, Analyse und Einordnung der Daten in die vorgegebenen Speicherformate; - Entwicklung der zur Datennutzung notwendigen statistischen Programmbibliothek. Zur Zeit gibt es 20 verschiedene Typen von Datensaetzen. Sie enthalten taegliche, monatliche und jaehrliche Daten und sind funktional miteinander verbunden. Alle Datensaetze werden kontinuierlich erweitert. (orig.)

Energy supply for the town of the future; Energieversorgung fuer die Stadt der Zukunft

Energy Technology Data Exchange (ETDEWEB)

Leithner, R. [ed.

1998-06-01

Thanks to the development of new energy systems which combine environmentally benign, heavily insulated buildings with renewable energy sources it is possible today to use energy in a responsible manner. This article presents concepts of urban planning and architecture which make use of integral energy systems, techniques for using renewable energy resources such as solar installations, energy supply through biomass and biogas, and the integration of renewable energy resources such as wind power in municipal supply systems and hydrogen as a clean energy source. Ten papers have been abstracted individually for the Energy Database. [Deutsch] Die Entwicklung neuer Energiesysteme, in denen oekologische, hochwaermegedaemmte Baukonstruktionen mit regenerativen Energiequellen kombiniert werden laesst einen verantwortungsvollen Umgang mit Energie zu. Im Folgenden werden dazu Stadtplanung und Architektur im Kontext integraler Energiekonzepte, Techniken zur Nutzung von regenerativen Energietraegern, wie Solaranlagen, Energiebereitstellung durch Biomasse und Biogas, sowie die Integration von regenerativen Energietraegern, z.B. Windenergienutzung im staedtischen Verbund und Wasserstoff als sauberer Energietraeger vorgestellt. Fuer die Datenbank Energy wurden zehn Beitraege einzeln aufgenommen.

Artificial intelligence for automotive applications - noise modelling; Kuenstliche Intelligenz fuer Fahrzeuganwendungen - Modellierung des Motorgeraeusches

Energy Technology Data Exchange (ETDEWEB)

Suchar, R. [nodes GmbH, Muenchen (Germany)

2000-12-01

Reducing the noise level in the interior of vehicles is both a comfort necessity and a challenging technical task. Reliable identification of the accessories responsible for high or low engine-noise levels in the interior of cars classically requires costly, time-consuming, extensive measurement sessions. Artificial intelligence tools efficiently solve the mentioned system-identification problem, and provide a principled way of extracting the information of interest from reduced size databases. (orig.) [German] Kuenstliche neuronale Netze, Fuzzy-Systeme, genetische Algorithmen - vor einem Jahrzehnt haette man gesagt, diese Begriffe stammen aus einem Science-Fiction-Roman. Heute verwenden sie Forscher an Hochschulen und in der Industrie mit dem gemeinsamen Ziel, kuenstliche Intelligenz (KI) in Real-Life-Projekte zu integrieren. Waehrend das Spektrum technischer Applikationen und kommerzieller Produkte sehr weit ist, konzentriert sich der vorliegende Beitrag auf eine spezielle Fahrzeuganwendung, die auf kuenstlichen neuronalen Netzen (KNN) basiert: die Ermittlung der Ausstattungsmerkmale, die fuer hohen Motorgeraeuschpegel im Fahrzeuginneren verantwortlich sind. (orig.)

Co-operative research for future energy supply; Gemeinsam Forschen fuer die Energie der Zukunft

Energy Technology Data Exchange (ETDEWEB)

Stadermann, G.; Szczepanski, P. (comps.)

2000-10-01

The FVS ForschungsVerbund Sonnenenergie was founded in 1990 and covers the whole spectrum of solar and renewable energy sources, from solid state physics to agriculture and technology assessment. [German] Seit der Entstehnung des FVS ForschungsVerbund Sonnenenergie haben sich die Rahmenbedingungen fuer die Erforschung der solaren und erneuerbaren Energien verbessert: Sie wurden in den letzten Jahren weiter erschlossen und haben an Bekanntheit und Sympathie gewonnen. Die von der Bundesregierung angestrebte Energiewende bedeutet eine Zaesur in der deutschen Energieversorgung und fuehrt zu einer staerkeren Foerderung erneuerbarer Energien. Sie werden zunehmend als markt- und zukunftsfaehiger Wirtschaftsfaktor wahrgenommen, zu dessen Erschliessung intensive Forschung und Entwicklung notwendig ist. Der Verbund gewinnt daher verstaerkt die Industrie und die Energiewirtschaft als Kooperationspartner im Forschungssektor. Das Themenspektrum im FVS ForschungsVerbund Sonnenenergie umfasst weitgehend alle solaren und erneuerbaren Energien. Diese Themen beinhalten eine Fuelle von einzelnen wissenschaftlichen Problemstellungen von der Festkoerperphysik bis zu agrarwissenschaftlichen Fragen nachwachsender Energierohstoffe und zur Technologiebewertung. (orig.)

The control and data acquisition system of a laser in-vessel viewing system

International Nuclear Information System (INIS)

Pereira, Rita C.; Cruz, Nuno; Neri, C.; Riva, M.; Correia, C.; Varandas, C.A.F.

2000-01-01

This paper presents the dedicated control and data acquisition system (CADAS) of a new laser in-vessel viewing system that has been developed for inspection purposes in fusion experiments. CADAS is based on a MC68060 microprocessor and on-site developed VME instrumentation. Its main aims are to simultaneously control the laser alignment system as well as the laser beam deflection for in-vessel scanning, acquire a high-resolution image and support real-time data flow rates up to 2 Mbyte/s from the acquisition modules to the hard disk and network. The hardware (modules for control and alignment acquisition, scanning acquisition and monitoring) as well as the three levels of software are described

Documentation of the 40th scientific symposium of the Society for Environmental Law e.V., Leipzig 2016; Dokumentation zur 40. wissenschaftlichen Fachtagung der Gesellschaft fuer Umweltrecht e.V. Leipzig 2016

Energy Technology Data Exchange (ETDEWEB)

NONE

2017-11-01

The documentation for the 40th scientific symposium of the Society for Environmental Law (GfU) in November 2016 in Leipzig offers illuminating insights into the state of discussions among German environmental law experts. TThe following focal points were at the centre of the jurisprudence debate: Four decades of immission control law (Prof. Dr. Alexander Schink, Bonn) - Legal problems of change approval (Prof. Dr. Olaf Reidt, Berlin) - Species protection law in the project approval (Judge at the BVerwG Dr. Dr. Ulrike Bick, Leipzig, Dr. Katrin Wulfert, Bochum) - Over-planning of infrastructure on the example of energy route planning (Dr. Tom Pleiner, Berlin) - The Nagoya Protocol and its implementation in the EU and Germany - Background and possible consequences for legal practice (Thomas Ebben, LL.M., Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety, Bonn). The conference proceedings contain these articles of the symposium, the summary of the subsequent discussions as well as the contributions of the GfU-Forum, which is aimed especially at young environmental lawyers. [German] Die Dokumentation zur 40. wissenschaftlichen Fachtagung der Gesellschaft fuer Umweltrecht (GfU) im November 2016 in Leipzig bietet aufschlussreiche Einblicke in den Diskussionsstand unter deutschen Umweltrechtsexperten. Im Zentrum der rechtswissenschaftlichen Auseinandersetzung standen folgende Schwerpunkte: Vier Jahrzehnte Immissionsschutzrecht (RA Prof. Dr. Alexander Schink, Bonn) Rechtsprobleme der Aenderungsgenehmigung (RA Prof. Dr. Olaf Reidt, Berlin) Artenschutzrecht in der Vorhabenzulassung (Richterin am BVerwG Dr. Ulrike Bick, Leipzig; Dr.-Ing. Katrin Wulfert, Bochum) Ueberplanung von Infrastruktur am Beispiel energiewirtschaftlicher Streckenplanungen (Dr. Tom Pleiner, Berlin) Das Nagoya-Protokoll und seine Umsetzung in der EU und Deutschland - Hintergruende und moegliche Folgen fuer die Rechtspraxis (Thomas Ebben, LL.M., Bundesministerium fuer

Standards for the secure data interchange in teleradiology put into practice for image and report distribution; Standards fuer den sicheren Datenaustausch in der Teleradiologie am Beispiel der Bild- und Befundverteilung

Energy Technology Data Exchange (ETDEWEB)

Eichelberg, M.; Riesmeier, J. [OFFIS e.V., Bereich IuK-Systeme im Gesundheitswesen, Oldenburg (Germany); Thiel, A.; Jensch, P. [Fachbereich Informatik, Carl-von-Ossietzky-Univ., Oldenburg (Germany); Emmel, D.; Haderer, A.; Ricke, J.; Stohlmann, L. [Klinik fuer Strahlenheilkunde, Charite-Campus-Virchow-Klinikum der Humboldt-Univ. zu Berlin (Germany); Bernarding, J. [Medizinische Informatik, Universitaetsklinikum Benjamin Franklin (UKBF), Freie Univ. Berlin (Germany)

2002-02-01

The use of telemedicine is becoming indispensable for a continuous and economical delivery of a high quality of care. However, data protection requirements have to be considered. For the selection of solutions, vendor-independent components based on standards are a prerequisite for a seamless integration into the existing, often heterogeneous, IT infrastructure. The ''Internet protocol'' TCP/IP and the DICOM standard with it's new security extensions form the basis for an internationally standardized and accepted procedure for a secure interchange of radiological images beyond platform boundaries. (orig.) [German] Um auch in Zukunft eine kostenguenstige und qualitativ hochwertige Patientenversorgung gewaehrleisten zu koennen, ist der Einsatz von Telemedizin unabdingbar. Dabei sind jedoch immer die Belange des Datenschutzes zu beruecksichtigen. Bei der Auswahl der Loesungen sind herstelleruebergreifende und auf Standards basierende Komponenten Voraussetzung fuer eine nahtlose Integration in die bestehende, oft heterogene EDV-Infrastruktur. Das ''Internetprotokoll'' TCP/IP und der DICOM-Standard mit seinen neuen Sicherheitserweiterungen bilden die Grundlage fuer ein weltweit standardisiertes und akzeptiertes Verfahren zum sicheren Austausch radiologischer Bilddaten ueber Plattformgrenzen hinweg. (orig.)

Postoperative and posttherapeutic changes after primary bone tumors. What's important for radiologists?; Postoperative und posttherapeutische Veraenderungen nach primaeren Knochentumoren. Was ist wichtig fuer den Radiologen

Energy Technology Data Exchange (ETDEWEB)

Grieser, T. [Klinikum Augsburg, Klinik fuer Diagnostische und Interventionelle Radiologie und Neuroradiologie, Augsburg (Germany); Noebauer-Huhmann, I.M. [Med. Universitaet Wien, Univ.-Klinik fuer Radiologie und Nuklearmedizin, Wien (Austria)

2017-11-15

Posttreatment imaging of primary bone tumours represents a diagnostic challenge for radiologists. Depending on the primary bone tumour common radiological procedures, such as radiography, computed tomography (CT), and magnetic resonance imaging (MRI), are employed. Radiography and CT are particularly useful in benign bone tumours and in matrix-forming bone tumours. MRI comes into consideration with malignant tumour recurrence and tumoral soft tissue infiltration. Bone scintigraphy is of superior importance if a primarily multifocal manifestation of bone tumour or metastasizing tumour disease is suspected. Molecular imaging (FDG-PET and hybrid imaging, using CT) are gaining increasing importance in light of monitoring neoadjuvant chemotherapy and detecting recurrent tumour appearance. The current literature shows sensitivity and specificity values for recurrent detection of up to 92% and 93%. Diagnostic accuracy is as high as 95%, thus, exceeding accuracy values for CT (67%) and MRI (86%) by far. Likewise, this is also applicable for the assessment of the neoadjuvant chemotherapy. Moreover, PET-based modalities are able to establish prognostic statements using SUV-threshold values at baseline (especially for Ewing sarcomas). Advanced imaging techniques have made a great diagnostic step forward and have proven to be relevant and reproducible with respect to both relapse detection and treatment assessment. Furthermore, it is not clear whether a higher detection rate of early tumour recurrence will inevitably lead to better outcome and survival. (orig.) [German] Die posttherapeutische Bildgebung primaerer Knochentumoren stellt eine diagnostische Herausforderung fuer jeden Radiologen dar. In Abhaengigkeit vom primaeren Knochentumor werden zur Nachsorge die gaengigen radiologischen Standardverfahren eingesetzt (Projektionsradiographie, Computertomographie [CT] und Magnetresonanztomographie [MRT]). Die Projektionsradiographie und CT haben einen besonderen Stellenwert v. a

A dynamic model for the nitrification of higher concentrated wastewaters and control by experiments; Ein dynamisches Prozessmodell fuer die Nitrifikation hoeher belasteter Abwaesser und praktische Anwendungen

Energy Technology Data Exchange (ETDEWEB)

Pirsing, A. [Siemens AG, Anlagentechnik ANL A73, Karlsruhe (Germany); Wiesmann, U. [Inst. fuer Verfahrenstechnik, Technische Univ. Berlin (Germany)

1995-07-01

Wastewater with high ammonia concentration is produced by many industries. However, the removal of higher loaded industrial effluents still poses many questions. Dynamic modelling is helpful to understand the process of nitrification and to investigate algorithms of process control. Therefore, a dynamic model of nitrification in completely mixed reactors is proposed based on mass balances for the components ammonia, nitrite, nitrate, dissolved oxygen, carbon dioxide, pH, nitrosomonas and nitrobacter. The biological reaction rates consider oxygen limitation and substrate inhibition. The process model presented it tested by lab scale experiments using an aerated stirred tank reactor. (orig.) [Deutsch] Es wird ein mathematisches Prozessmodell fuer die Nitrifikation von Industrieabwaessern mit hoher Ammoniumkonzentration vorgestellt, das bislang vernachlaessigte Phaenomene wie z.B. Substratueberschusshemmung und Sauerstofflimitierung beruecksichtigt. Als theoretische Grundlage dienen Bilanzgleichungen fuer insgesamt acht Komponenten. Das Simulationsmodell wird durch den Vergleich mit experimentellen Ergebnissen aus einer Laborversuchsanlage auf seine Richtigkeit ueberprueft. In dem Beitrag werden auf diesem Modell basierende Anwendungsbeispiele behandelt. So werden die Moeglichkeiten der dynamischen Prozesssimulation zur Steigerung der Betriebsstabilitaet bei schwankenden Zulaufkonzentrationen und -volumenstroemen gezeigt. Darueber hinaus gelingt die Rekonstruktion der Umsatzraten r(O{sub 2}) und r(NH{sub 3}) aus der Sauerstoff- und Kohlendioxidkonzentration in der Abluft. (orig.)

Market monitoring. Globalization of professional education for engineers. Chances and market potentials of German sellers; Marktsondierung. Internationalisierung beruflicher Weiterbildung fuer Ingenieure. Chancen und Marktpotenziale deutscher Anbieter

Energy Technology Data Exchange (ETDEWEB)

Luther, W.; Baron, W.; Zweck, A.

2002-09-01

A market monitoring study was carried to determine which countries and which business fields offer opportunities for developing promising activities. The results of the market monitoring study, which was carried out by the VDI Technology Centre, will also be made available to other interested training institutions with a view to promoting the globalisation of professional education for engineers. The following countries were included in the study: USA, Belgium, France, Great Britain, Ireland, the Netherlands, Sweden, and Spain. The study focused chiefly on technically specialised staff and executives. As regards products and services the main focus is on training events with a short runtime and areas where there is a strong interest in the globalisation of training providers. [German] Mittels einer Marktsondierung wurde untersucht, in welchen Laendern und in welchen Geschaeftsfeldern aussichtsreiche Aktivitaeten entfaltet werden koennen. Die Ergebnisse dieser Marktuntersuchung des VDI-Technologiezentrums werden auch weiteren interessierten Weiterbildungseinrichtungen zur Verfuegung gestellt, um auf diese Weise einen Beitrag zur staerkeren Internationalisierung beruflicher Weiterbildung fuer Ingenieure zu leisten. Die Studie analysiert folgende Ziellaender: USA, Belgien, Frankreich, Grossbritannien, Irland, Niederlande, Schweden und Spanien. Als Zielgruppe werden technische Fach- und Fuehrungskraefte fokussiert. Als moegliche Produkte und Dienstleistungen stehen Veranstaltungen mit relativ kurzer Laufzeit und Handlungsfelder im Vordergrund, die fuer eine Internationalisierung der Weiterbildungsanbieter von besonderem Interesse sind. (orig.)

Comparative discussion of the activated sludge and packed bed techniques in biological sewage water cleaning; Vergleichende Betrachtung von Belebungs- und Festbettverfahren fuer die biologische Abwasserreinigung

Energy Technology Data Exchange (ETDEWEB)

Kroiss, H [Technische Univ., Vienna (Germany). Inst. fuer Wasserguete und Abfallwirtschaft

1994-12-31

It is reasonable to state that, given proper planning, erection and careful operation, both activated sludge plants and packed bed reactors with a biofilm are capable of meeting extremely high demands on the quality of the effluent. What was to be shown is the fact that operating behaviour and demands on measurement and control techniques differ considerably. Rating depends on different criteria, according to the technique chosen, and also cost calculation is largely determined in each case by special local conditions. All this makes it difficult to compare solutions with one another or to transfer experience gathered in one plant to another application. So the choice of the best possible method in a given case remains an interesting task.- One must try to make as objective a comparison as possible of different solutions according to the relevant criteria, beyond what is quantifiable merely in terms of finance.- Any decision taken on the basis of such a comparison is bound to reflect also the values that the decision-makers hold. But it should always be possible when taking decisions about processes to leave ideology out of consideration. (orig.) [Deutsch] Es kann festgestellt werden, dass sowohl Belebungsanlagen wie auch Biofilmreaktoren bei richtiger Planung, Errichtung und sorgfaeltigem Betrieb in der Lage sind, auch extrem hohe Ansprueche an die Ablaufguete zu erfuellen. Was gezeigt werden sollte, ist der Umstand, dass erhebliche Unterschiede im Betriebsverhalten und in den Anforderungen an die Mess- und Regeltechnik bestehen. Fuer die Bemessung sind je nach Verfahren andere Kriterien massgebend, und auch fuer die Kostenrechnung gilt, dass die speziellen oertlichen Bedingung bei jedem Anwendungsfall von ausschlaggebender Bedeutung sind. Das alles hat zur Folge, dass es sehr schwierig ist, verschiedene Loesungsmoeglichkeiten miteinander zur vergleichen, oder die Erfahrung von einer Anlage auf einen anderen Anwendungsfall zu uebertragen. Die Auswahl des ``besten

Diagnostics of vascular diseases as a cause for acute abdomen; Diagnostik vaskulaerer Erkrankungen als Ursache fuer das akute Abdomen

Energy Technology Data Exchange (ETDEWEB)

Juchems, M.S. [Universitaetsklinikum Ulm, Klinik fuer Diagnostische und Interventionelle Radiologie, Ulm (Germany); Aschoff, A.J. [Klinikum Kempten-Oberallgaeu, Abteilung fuer Radiologie, Kempten (Germany)

2010-03-15

Vascular pathologies are rare causes of an acute abdomen. If the cause is a vascular disease a rapid diagnosis is desired as vascular pathologies are associated with high mortality. A differentiation must be made between arterial and venous diseases. An occlusion of the superior mesenteric artery is the most common reason for acute mesenteric ischemia but intra-abdominal arterial bleeding is also of great importance. Venous pathologies include thrombotic occlusion of the portal vein, the mesenteric vein and the vena cava. Multi-detector computed tomography (MDCT) is predestined for the diagnostics of vascular diseases of the abdomen. Using multiphasic contrast protocols enables reliable imaging of the arterial and venous vessel tree and detection of disorders with high sensitivity and specificity. Although conventional angiography has been almost completely replaced by MDCT as a diagnostic tool, it is still of high importance for minimally invasive interventions, for example in the management of gastrointestinal bleeding. (orig.) [German] Vaskulaere Pathologien sind seltene Ursachen fuer den klinischen Zustand eines akuten Abdomens. Liegt eine vaskulaere Erkrankung vor, ist jedoch aufgrund der hohen Mortalitaet eine zuegige Diagnostik von grosser Wichtigkeit. Bei den Erkrankungen der abdominellen Gefaesse sind arterielle von venoesen Ursachen zu unterscheiden. Ein Verschluss der A. mesenterica superior ist die haeufigste Ursache fuer die akute Mesenterialischaemie, daneben sind Blutungen in den abdominellen Gefaessprovinzen des arteriellen Gefaessbaums von Bedeutung. Venoese Pathologien betreffen thrombotische Verschluesse der Pfortader, der V. mesenterica und der V. cava. Die Multidetektor-CT (MDCT) ist zur Diagnostik vaskulaerer Erkrankungen des Abdominalraums praedestiniert. Mit mehrphasigen Untersuchungsprotokollen gelingt es, den arteriellen und venoesen Gefaessbaum zuverlaessig darzustellen und Erkrankungen mit hoher Sensitivitaet und Spezifitaet zu

Fuel cells for the electricity supply of plants remote from the grid; Brennstoffzellen fuer die Elektrizitaetsversorgung von netzfernen Anlagen

Energy Technology Data Exchange (ETDEWEB)

Ledjeff, K

1996-12-31

The solar house at Freiburg, which is independent for energy, obtains all its energy only from the radiation impinging on the outside of the building. The space heating, provision of hot water, energy for cooking and electricity are provided by conversion of solar energy. A photo-electric generator supplies electricity which, apart from direct consumption, can be stored in a lead battery and the hydrogen system. The hydrogen system is the last link in the chain of the energy converter and represents the only energy supply if the thermal and electrical systems cannot any longer be supplied by the sun. The hydrogen system must therefore cover the energy demand in winter, consisting of a small heater for space heating and of course the fuel cell for providing electricity. The ideal fuel cell system for the solar house, which is independent for energy, is the PEMFC with an output of 500 W-1 kW. (orig./MM) [Deutsch] Das Energieautarke Solarhaus in Freiburg bezieht die gesamte Energie nur aus der auf die Gebaeudehuelle auftreffende Strahlung. Die Raumheizung, die Warmwasserbereitung, die Energie zum Kochen und der elektrische Strom werden durch die Umwandlung von Sonnenenergie bereitgestellt. Ein Photovoltaik-Generator liefert elektrische Energie, die neben dem direkten Verbrauch in eine Bleibatterie und das Wasserstoffsystem zur Speicherung eingespeist werden kann. Die Wasserstoffspeicherung erfolgt als Gas bei einem Druck von 30 bar. Das Wasserstoffsystem ist das letzte Glied in der Kette der Energiewandler und stellt den einzigen Energievorrat dar, wenn die thermischen und elektrischen Systeme nicht mehr solar versorgt werden koennen. Das Wasserstoffsystem muss daher den Energiebedarf im Winter decken, das sich ein kleiner Nachheizer fuer die Raumheizung und natuerlich die Brennstoffzelle zur Bereitstellung elektrischer Energie. Das ideale Brennstoffzellensystem fuer das Energieautarke Solarhaus ist die PEMFC mit einer Leistung von 500 W-1 kW. (orig./MM)

Radiation protection and communication of information. 21. Annual meeting of the French association ATSR; Strahlenschutz und Kommunikation. 21. Jahrestagung der franzoesischen Vereinigung fuer Technik und Wissenschaft im Strahlenschutz (ATSR)

Energy Technology Data Exchange (ETDEWEB)

Hoefert, M. [CERN, Geneva (Switzerland)

2001-07-01

The conference report presents a brief summary of papers and discussion topics. (orig./CB) [German] Die 21. Jahrestagung der ATSR fand dieses Jahr unter dem Motto 'Strahlenschutz und Kommunikation' im herbstlich sonnigen Aix en Provence statt. Die ATSR ist neben der Franzoesischen Gesellschaft fuer Strahlenschutz (SFR) eine zweite Standesorganisation, in der sich praktisch arbeitende Strahlenschutzverantwortliche in Frankreich organisiert haben. (orig.)

Development of service-relevant materials data and economic quality assurance and machining procedures for gas turbine blades. Final report; Entwicklung betriebsrelevanter Werkstoffkennwerte und wirtschaftlicher Qualitaetssicherungs- und Bearbeitungsverfahren fuer GT-Schaufeln. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Buergel, R.; Rechtenbacher, H.

1994-01-01

In the frame of the reported project, together with the programme partners, optimization of service relevant properties as well as modification of manufacturing procedures for the forged alloy Nimonic 101 were achieved. These results are directly implementable into serial production and cause improved service reliability and economic benefit. For the forged alloy Udimet 720 materials data were generated in accordance with the programme plan. The final evaluation for this alloy will be performed by the project partner Siemens-KWU. The qualification of fine-grained investment cast blades of IN 792 for large rear=stage blading is not yet fully completed. Three major questions are lacking final answers: - Does a stress rupture strength advantage exist over the forged alloy Udimet 720/coarse/grained? - Can a high cycle fatigue strength as high as that for Udimet 720/coarse-grained be met reproducibly? - Does the investment cast blades offer a cost advantage over the forged ones - technical qualification assumed? The programme helped significantly in preparing the right answers to these questions. (orig.) [Deutsch] Im Rahmen des berichteten Teilvorhabens ist es in Zusammenarbeit mit den Projektpartnern gelungen, fuer die Schmiedelegierung Nimonic 101 die betriebsrelevanten Eigenschaften zu optimieren, sowie die Schaufelherstellung so zu modifizieren, dass die Betriebszuverlaessigkeit verbessert wird. Diese Ergebnisse sind direkt in die Serienfertigung implementierbar und damit wirtschaftlich nutzbar. Fuer die Schmiedelegierung Udimet 720 wurden im Rahmen des Projektverbundes Werkstoffkennwerte ermittelt. Die Gesamtauswertung fuer diesen Werkstoff erfolgt von Projektpartner Siemens-KWU. Das Bild zur Qualifikation feinkoerniger Feingussschaufeln ist noch nicht restlos klar. Drei wesentliche, noch abschliessend zu beantwortende Fragen sind: - Ergibt sich ein Zeitstandfestigkeitsvorteil gegenueber der Schmiedelegierung Udimet 720/Grobkorn? - Laesst sich reproduzierbar eine

Climate to measure. Facility management for Universal Music at Berlin; Klima nach Mass. TGA-Planung fuer Universal Music in Berlin

Energy Technology Data Exchange (ETDEWEB)

McLead, E.A.

2002-07-01

Designing and constructing the technical facilities for a historical building like the 'Spreespeicher' in Berlin is a difficult but interesting task. The building is owned by Universal Music. Each department has its own office structure, and all offices and structures were integrated in a functional overall concept by the planners of Happold Ingenieure. [German] Klima, Lueftung und Elektroinstallation fuer ein historisches Gebaeude wie den Berliner Spreespeicher zu entwickeln, ist eine schwierige, aber reizvolle Aufgabe. Besonders, wenn der Nutzer Universal Music heisst: Jede Abteilung besitzt ihre eigene Buerostruktur, und alle mussten die TGA-Planer von Happold Ingenieure in ein funktionierendes Gesamtkonzept integrieren. (orig.)

Geothermal heat for Erding. 2. Energy and wellness, geothermal heating station and hot-water indoor swimming pool; Geowaerme fuer Erding 2. Energie und Wellness, Geothermieheizwerk und Thermalbad

Energy Technology Data Exchange (ETDEWEB)

Tenzer, H. (comp.); Bussmann, W.

1999-07-01

This 17:20 minute VHS-PAL video film describes the project 'Geothermal heat for Erding 2', i.e. the construction of the geothermal heating station and a modern hot-water indoor swimming pool. [German] Der vorliegende VHS-PAL-Videofilm beschreibt innerhalb von 17:20 Min. Lauflaenge das Projekt 'Geowaerme fuer Erding 2'. Gezeigt werden die Entstehungsphasen dieses Projektes bestehend aus einem Geothermieheizwerk und einem modernen Thermalbad. (AKF)

Using continuous UV extinction measurements to monitor and control the aerated phase of sequencing batch reactors; Einsatz der kontinuierlichen UV-Extinktionsmessung fuer die Ueberwachung und Regelung der Belueftungsphase in SBR-Anlagen

Energy Technology Data Exchange (ETDEWEB)

Nicolet, L.; Rott, U. [Stuttgart Univ. (Germany). Inst. fuer Siedlungswasserbau, Wasserguete- und Abfallwirtschaft; Bardeck, S. [Optek-Danulat GmbH (Germany)

1999-07-01

The work describes the measurement of UV extinction - expressed as the spectral absorption coefficient SAC - at a randomly chosen wave length as a technique for monitoring organic load in effluents from sequencing batch reactors (SBR) at municipal and industrial waste water treatment plants. Further described is to what extent the continuous determination of the SAC can be used in practice for the control of the aerated phase of sequencing batch reactors. By this means, process stabilization and optimization can be achieved and operating reliability can be enhanced. (orig.) [German] Inhalt dieses Beitrages ist es, die Messung der UV-Extinktion - ausgedrueckt durch den spektralen Absorptionskoeffizient (SAK) - bei einer frei gewaehlten Wellenlaenge als Verfahren fuer die Ueberwachung der organischen Belastung in den Ablaeufen von SBR-Anlagen (Sequencing-Batch-Reactor) in der kommunalen und industriellen Abwasserreinigung vorzustellen. Weiterhin soll dargestellt werden, in wieweit die kontinuierliche Bestimmung des SAK in der Praxis fuer die Regelung der beluefteten Phase von SBR-Anlagen eingesetzt werden kann. Hiermit kann eine Prozessstabilisierung und -optimierung der Anlagen erreicht sowie die Betriebssicherheit erhoeht werden. (orig.)

Consequences of the amended Biomass Waste Ordinance for biological waste treatment; Konsequenzen der novellierten Bioabfallverordnung fuer die biologische Abfallbehandlung

Energy Technology Data Exchange (ETDEWEB)

Kehres, Bertram [Bundesguetegemeinschaft Kompost e.V. (BGK), Koeln (Germany)

2012-11-01

The amended Biomass Waste Ordinance will bring about changes in biological waste treatment to which operators of composting and fermenting plants will have to adapt. The contribution outlines the most relevant changes; at the time of publication, it was not known how the Bundesrat would decide with regard to the Amendment, probably in late March 2012. (orig.) [German] Die Novelle der Bioabfallverordnung wird fuer die biologische Abfallbehandlung verschiedene Veraenderungen mit sich bringen, auf die sich Betreiber von Kompostierungs- und von Vergaerungsanlagen einzustellen haben. Auf die wesentlichen Aenderungen wird in diesem Beitrag eingegangen. Zum Zeitpunkt der Abfassung dieses Beitrages ist allerdings noch nicht vollstaendig bekannt, wie der Bundesrat - voraussichtlich Ende Maerz 2012 - ueber die Novelle abschliessend entscheiden wird. (orig.)

Achievement in research on ion beam application under the scientific cooperation program with the Gesellschaft fuer schwerionenforschung mbH

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Masaru; Maekawa, Yasunari (eds.) [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

2003-03-01

The Japan Atomic Energy Research Institute (JAERI) and the Gasellshaft fuer Schwerionenforshung mbH (GSI) signed a memorandum of 'Research and Development in the Field of Ion Beam Application' in January, 1991 and started the cooperative research program. The cooperation has been implemented by means of joint research between JAERI and GSI, exchange of scientific and technical experts, and providing mutual exchange of research materials as well as technical information. This report summarizes the cooperative research activities under the cooperative research program in the last 12 years. The list of publications and several articles relating to this cooperative research program are attached as an appendix. All the attached articles are reprinted with permission from the publishers. (author)

InterCity tilting e.m.u. for Deutsche Bahn; InterCity-Triebzuege mit Neigetechnik fuer die Deutsche Bahn

Energy Technology Data Exchange (ETDEWEB)

Behmann, U.

1999-07-01

When changing time schedule in the end of may 1999 the German Railway (DB) starts with a new generation of electric intercity trains for 1 AC 15 kV 16 2/3 Hz. Five trains with tilt mechanism will travel between Stuttgart - Singen - Schaffhausen - Zurich. For this purpose these trains are equipped in addition with swiss current collectors and safety engineering. [German] Zum Fahrplanwechsel Ende Mai 1999 wird die Deutsche Bahn (DB) mit einer neuen Generation elektrischer InterCity-Triebzuege fuer 1 AC 15 kV 16 2/3 Hz in den kommerziellen Dienst gehen. Mit fuenf Zuegen Baureihe (BR) 415 mit Neigetechnik (ICT) wird sie die Relation Stuttgart - Singen - Schaffhausen - Zuerich bedienen. Dafuer wurden diese fuenf Zuege zusaetzlich mit schweizerischer Stromabnehmerwippe und Zugsicherungseinrichtung ausgeruestet. (orig/GL)

Investigation of a matrix converter for contactless power transmission systems; Untersuchung eines Matrixumrichters fuer kontaktlose Energieuebertragungssysteme

Energy Technology Data Exchange (ETDEWEB)

Ecklebe, Andreas

2009-05-22

Arbeit beschaeftigt sich mit einem drei- zu zweiphasigen Matrixumrichter zur Speisung von kontaktlosen Energieuebertragungssystemen. Aufbauend auf einer Darlegung relevanter Untersuchungen zur Thematik werden zunaechst moegliche Resonanzanordnungen fuer kontaktlose Energieuebertragungssysteme untersucht. Die Betrachtung wichtiger elektrischer Parameter zeigt neben den Unterschieden der einzelnen Anordnungen auch, dass fuer eine auf den speisenden Umrichter fokussierte Untersuchung eine einfache Modellierung der drei untersuchten Resonanzanordnungen mit Hilfe eines Reihenschwingkreises moeglich ist. Als Konsequenz ergibt sich die Schlussfolgerung, dass sich die erzielten Ergebnisse auch fuer den Matrixumrichter mit anderen serienresonanten Lasten anwenden lassen. Der zweite Teil der Arbeit ist der Untersuchung des Matrixumrichters gewidmet. Basierend auf einer theoretischen Beschreibung wird die Kombination von hochfrequenten Steuerverfahren - wie z.B. der Blocktaktung - und niederfrequenten Pulsmustern zur Stellung des Oberschwingungsgehalts der Netzstroeme vorgestellt. Die Aehnlichkeit des Umrichters zu einem konventionellen Wechselrichter in H-Brueckenschaltung ermoeglicht anschliessend eine Betrachtung der Kommutierung und die Ableitung notwendiger Schaltzustaende. Diese sind dadurch gekennzeichnet, dass zu jedem Zeitpunkt genau eine bidirektionale Verbindung vom Eingangssystem zu jeder Ausgangsphase besteht. Die Funktionsweise der Kommutierung wie auch des gesamten Umrichters wird in einem ersten Schritt simulativ belegt. Dabei wird auch das dynamische Schaltverhalten der Leistungshalbleiter beruecksichtigt. Anschliessend werden an einem Laboraufbau aufgenommene Messergebnisse vorgestellt und mit den theoretischen Ergebnissen verglichen. Der Laboraufbau besteht aus dem Leistungsteil des Matrixumrichters mit Eingangsfiltern und modularen Gate-Treibern, einem DSP/FPGA-Steuerungssystem und einem kontaktlosen Energieuebertragungssystem mit sekundaerseitigem Gleichrichter

The RHIC general purpose multiplexed analog to digital converter system

International Nuclear Information System (INIS)

Michnoff, R.

1995-01-01

A general purpose multiplexed analog to digital converter system is currently under development to support acquisition of analog signals for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The system consists of a custom intelligent VME based controller module (V113) and a 14-bit 64 channel multiplexed A/D converter module (V114). The design features two independent scan groups, where one scan group is capable of acquiring 64 channels at 60 Hz, concurrently with the second scan group acquiring data at an aggregate rate of up to 80 k samples/second. An interface to the RHIC serially encoded event line is used to synchronize acquisition. Data is stored in a circular static RAM buffer on the controller module, then transferred to a commercial VMEbus CPU board and higher level workstations for plotting, report Generation, analysis and storage

Process development for utilizing asbestos cement waste in rotary kilns for the cement industry. Final report; Erarbeitung eines Verfahrens zur stofflichen Verwertung von zementgebundenen Asbestprodukten in Drehrohroefen fuer die Zementindustrie. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Schlegel, R.; Kieser, J.; Kraehner, A.

1999-11-01

The law for recycling and waste demands the utilization also for waste of asbestos cement (ac). The procedure of thermal utilization of ac in the flame of a rotary cement kiln was developed and patented by the research institute IBU-tec Weimar, Germany. The ac-material has to be pre-pulverized and grinded to a degree of fineness of R{sub 90}<15%. Considerations of safety engineering lead to the idea of common fine grinding of old oil (oo) and ac. This new procedure was searched in FuE-project in 1998/99 (financial support by BMBF). A mash of ac and oo was generated as a utilization product ready for firing which was injected into the flame of the rotary cement kiln. This particles of ac smelt to spherical shaped particles at a temperature above 1500 C. They were utilized by clinker formation. The material and gas stream leaving the kiln does not contain fibres of asbestos. This was demonstrated in a small equipment burning test. The industrial realization concerning cement plant Ruedersdorf, near Berlin, was searched, technologically described and safety engineeringly and financially assessed by a project study. Process-technical and financial advantages were seen for the dry fine grinding. The wet fine grinding with old oil could be used in cement plants using old oil as fuel. (orig.) [German] Das Kreislaufwirtschafts- und Abfallgesetz (1994) fordert u.a. die stoffliche Verwertung auch fuer Asbestzementabfaelle (AZ). Das vom Institut fuer Baustoff- und Umweltschutz-Technologie Weimar 1995 entwickelte und patentierte Verfahren zur thermischen Verwertung von AZ in der Flamme eines Zementdrehrohrofens erfuellt diese Forderung. Das AZ-Material muss vorzerkleinert und bis zur Rohmehlfeinheit (R{sub 90}<15%) feingemahlen werden. Sicherheitstechnische Ueberlegungen fuehrten zu der Idee, die Feinmahlung zusammen mit Altoel (AOe) zu erproben. Diese Verfahrensvariante wurde im Rahmen eines FuE-Projektes 1998/99 untersucht (finanzielle Foerderung durch das BMBF). Als

Design and optimization of the low frequency eddy current technique for the volumetric inspection of austenitic small diameter tubes with a wall thickness up to 12 mm; Auslegung und Optimierung des Niederfrequenz-Wirbelstrom-Verfahrens fuer die volumetrische Pruefung von austenitischen Neben- und Kleinleitungen mit Wandstaerken bis 12 mm

Energy Technology Data Exchange (ETDEWEB)

Becker, R; Bessert, S; Disque, M; Weiss, R [Fraunhofer-Institut fuer Zerstoerungsfreie Pruefverfahren, Saarbruecken (Germany)

1998-11-01

The low-frequency eddy current technique discussed is a suitable external inspection technique detecting defects at the inner walls of small-diameter tubes and measuring their depths via the ligament. A testing system with optimized sensor lus software for image recording, evaluation, display and documentation is available. The current state of development of the system permits detection and measurement of defects up to 20 mm in size in austenitic inner walls 12.5 mm thick down to a depth of 3 mm. This applies both to the homogenous base metal and the weld with {delta} ferrite. (orig./CB) [Deutsch] Das vorgestellte Niederfrequenz-Wirbelstrom-Verfahren ist geeignet, bei Pruefung von aussen Fehler an der Innenseite von Klein- und Nebenleitungen nachzuweisen und ueber das Ligament deren Tiefe zu bestimmen. Ein entsprechendes Pruefsystem mit optimiertem Sensor und der Software zur Aufnahme, Auswertung, Darstellung und Dokumentation der Wirbelstrom-Urdaten steht zur Verfuegung. Beim jetzigen Entwicklungsstand liegt die Nachweisgrenze fuer einen 20 mm langen Innenfehler in einer 12.5 mm dicken austenitischen Wandung bei einer Fehlertiefe von 3 mm. Dies gilt sowohl fuer den homogenen Grundwerkstoff als auch fuer Schweissgefuege mit {delta}-Ferrit. (orig./MM)

Energy saving advice on site. A financial incentive of the Federal Ministry of Economics and Technology; Energiesparberatung vor Ort. Ein Foerderprogramm des Bundesministeriums fuer Wirtschaft und Technologie

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-15

Energy conservation is useful not only from the perspective of energy policy and climate policy. Energy conservation also means a noticeable cost savings. Here, the program 'on-site consultation' comes in: experts assist owners, renters and tenants of residential buildings in the renovation of real estate. The expert advice is funded by the Kreditanstalt fuer Wiederaufbau (Frankfurt (Main), Federal Republic of Germany) if it is recognizable that this is not achievable economically.

The influence of mesoscale structures on stratospheric ozone. Part A: the potential of mesoscale mountain waves for polar stratospheric clouds (PEPS). Final report; Der Einfluss mesoskaliger Strukturen auf das stratospaerische Ozon. T. A: Das Potential von mesoskaligen Gebirgswellen fuer die Entstehung von polaren Stratosphaerenwolken (PEPS). Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Doernbrack, A.; Volkert, H.

1999-11-11

In this project a succession of tasks, partly going beyond what had originally been planned, was carried out and documented in a series of publications: (a) establishment of a mesoscale forecasting operation for measuring campaigns such as the Lidar measurements carried out in Part B (SAPOS); (b) case study calculations on PSC observations; (c) simulation of the entire month of January 1997; (d) derivation of criteria for wave activity from conventional weather data; (e) evaluation of these criteria for the last 20 winter periods. Besides this there was a lively exchange of simulation and measuring results with other groups within the OFP and from Scandinavian countries. In executing this extensive work programme the researchers profited greatly from the preliminary work done on the use of an experimental weather forecasting model (Leutbecher and Volkert, 1998), a dissertation prepared in the working group (Leutbecher, 1998), and the actual project work which was carried out by a doctor of science with extensive experience in the operation of complex meteorological models. [German] Im vorliegenden Projekt wurde eine Stufenleiter von Aufgaben erledigt, teilweise in Erweiterung der urspruenglichen Planung, und durch eine Reihe von Veroeffentlichungen dokumentiert: (a) Einrichtung eines mesoskaligen Vorhersagebetriebs fuer Messkampagnen, u.a. fuer die Lidar-Messungen aus Teil B (SAPOS); (b) Fallstudienrechnungen zu PSC Beobachtungen; (c) eine komplette Monatssimulation des Januar 1997; (d) die Ableitung von Kriterien fuer Wellenaktivitaet aus konventionellen Wetterdaten; (e) Auswertung dieser Kriterien fuer die letzten zwanzig Winterperioden. Daneben bestand ein reger Austausch an Simulations- und Messergebnissen mit anderen Gruppen innerhalb des OFP und in den skandinavischen Laendern. Das umfangreiche Arbeitspensum profitierte stark von Vorarbeiten zum Einsatz eines experimentellen Wettervorhersagemodells (Leutbecher und Volkert, 1996), einer in der Arbeitsgruppe

A TRD Trigger for the tevatron collider experiment at D0

Energy Technology Data Exchange (ETDEWEB)

Utes, M.; Johnson, M.; Martin, M.

1991-11-01

A VME-based module for use as an input to the D0 Detector Level 1.5 Trigger is described. Its main function will be the confirmation of electron candidates flagged by the First Level Calorimeter Trigger using digitized data from the Transition Radiation Detector. Features of the board include the use of fast FIFOs to store incoming track coordinates, dual ported SRAM lookup tables for addressing integrated charge data and forming scalars, multiplier/accumulators for speed of calculation, and a single synchronous finite state machine to control all board operations. 4 refs., 3 figs.

JIGSAW: Acquisition, Display and Analysis system designed to collect data from Multiple Gamma-Ray detectors

International Nuclear Information System (INIS)

Haywood, S.E.; Bamford, G.J.; Rester, A.C.; Coldwell, R.L.

1992-01-01

In this paper, the authors report on work performed to date on JIGSAW - a self contained data acquisition, display and analysis system designed to collect data form multiple gamma-ray detectors. The data acquisition system utilizes commercially available VMEbus and NIM hardware modules and the VME exec real time operating system. A Unix based software package, written in ANSI standard C and with the XII graphics routines, allows the user to view the acquired spectra. Analysis of the histograms can be performed in background during the run with the ROBFIT suite of curve fitting routines

A TRD Trigger for the tevatron collider experiment at D0

International Nuclear Information System (INIS)

Utes, M.; Johnson, M.; Martin, M.

1991-11-01

A VME-based module for use as an input to the D0 Detector Level 1.5 Trigger is described. Its main function will be the confirmation of electron candidates flagged by the First Level Calorimeter Trigger using digitized data from the Transition Radiation Detector. Features of the board include the use of fast FIFOs to store incoming track coordinates, dual ported SRAM lookup tables for addressing integrated charge data and forming scalars, multiplier/accumulators for speed of calculation, and a single synchronous finite state machine to control all board operations. 4 refs., 3 figs

Upgrade of the controls for the Brookhaven linac

International Nuclear Information System (INIS)

Buxton, W.E.

1995-01-01

The control of the magnets, rf system, and other components at the Brookhaven Linac uses a system that was developed at Brookhaven in the late 1960's. This system will be retired in the summer of 1995. The Linac controls are being upgraded using modem VME-based hardware compatible with RHIC generation controls, and an existing serial field bus. The timing for the Linac will also be upgraded and will use components developed for RHIC. The controls in general, the timing for the Linac, and the modules developed will be described

The energy-effective redesign of district heat supply for the city of Eisenach; Energiewirtschaftliche Neugestaltung der Fernwaermeversorgung fuer die Stadt Eisenach

Energy Technology Data Exchange (ETDEWEB)

Stich, J. [Eproplan GmbH, Stuttgart (Germany)

1996-09-01

The present contribution describes the optimal heat generation for the district heat area ``North`` of the city of Eisenach and economic redesign of this district heat network. The district heat network is operated by the public utility of Eisenach (Eisenacher Versorgungs-Betriebe GmbH (EVB)), which also runs the heating station, that used to be fuelled with coal. (orig./GL) [Deutsch] Der vorliegende Beitrag befasst sich mit der optimalen Waermeerzeugung fuer das Fernwaerme-Versorgungsgebiet `Nord` der Stadt Eisenach und mit der wirtschaftlichen Umgestaltung dieses Fernwaermenetzes. Das Fernwaermenetz wird durch die Eisenacher Versorgungs-Betriebe GmbH (EVB) betrieben, wie auch das ehemalige kohlegefeuerte Heizwerk. (orig./GL)

Made of modules - the Setra versatile bus; Aus Modulen kombiniert - die Baureihe Setra-Kombibus

Energy Technology Data Exchange (ETDEWEB)

Hamsten, B.; Stangl, G. [EvoBus GmbH, Stuttgart (Germany)

1997-07-01

Setra is in the process of replacing its most successful bus 200 UL which, with its many versions, was for more than ten years leader in the market saegment of intercity public service buses. The development of the new bus family, the `Kombibus` Kombi means versatile, was started from scratch. The entirely new bus is made from modules, and the consistency with which this idea was carried through is the real innovation. Not only are driveline and running gear standardised modules - this has been common practice with buses for a long time - but also the body in white, the components and fittings of the body, the equipment, and the many extras. With only four different cross sections through the passenger compartment a wide spectrum of buses is covered, ranging from a plain low-floor bus to the luxurious travel coach. The `Kombibus` permits the operator of a bus fleet to combine modules to make exactly the bus he requires without the need for a new type. At the same time, the manufacturer has gained the advantage of being able to serve a larger market segment with fewer parts and components, at lower cost and with a shorter delivery time. (orig.) [Deutsch] Setra ist dabei, die erfolgreiche Baureihe 200, die seit mehr als zehn Jahren Markftuehrer in dem Segment Ueberlandlinienbus ist, durch die von Grund auf neu entwickelte Familie `Kombibus` abzuloesen. Innovativ am `Kombibus` ist die Konsequenz, mit der das Modulkonzept auf alle Komponenten angewendet wurde. Nicht nur Triebstrang und Fahrwerk wurden danach festgelegt, sondern auch die Karosserie, ihr Rohbau ebenso wie ihre Ausruestung und das gesamte Zubehoer. Mit nur vier verschiedenen Querschnittsformen durch den Fahrgastraum wird ein Spektrum abgedeckt, welches vom nuechternen Niederflur- bis hin zum komfortablen Reisebus reicht. Den Betreibern von Omnibussen bietet der `Kombibus` die Moeglichkeit, sich den genau auf ihre Anforderungen zugeschnittenen Bus zusammenzustellen. Fuer den Hersteller ergibt sich der

Low-cost automatic meter reading system for the productive and energy supplying industry; Kostenguenstige, automatische Ressourcenzaehlerauslesung fuer Industrie und Versorgungsunternehmen

Energy Technology Data Exchange (ETDEWEB)

Rac, M. [Hydrometer GmbH, Ansbach (Germany)

2000-09-01

The continuous automatic controlling of energy and resource consumption as a tool for savings, marketing and early leakage detection is often not used by small to medium sized companies and energy suppliers. Usually the high system costs are the main reason for not implementing such a system. However, selecting the right system components may lead to a better pay-off. (orig.) [German] Die kontinuierliche automatische Ressourcenueberwachung als Massnahme zur Einsparung, als Wettbewerbsinstrument sowie zur fruehzeitigen Leckageerkennung wird in vielen kleinen und mittleren Betrieben und Versorgungsunternehmen nicht genutzt. Meistens sind die zu hohen Kosten fuer ein solches System der ausschlaggebende Faktor. Mit der richtigen Wahl der Systemkomponenten erschliessen sich aber neue Moeglichkeiten. (orig.)

Environment 2000. New trends in energy supply. Onset of the solar age - strategies for a sustainable future. Mobility in the new millenium - protection of humans and nature. Conservation - champions of plants and animals; Umwelt 2000: Die Energiewende: Aufbruch ins solare Zeitalter - Strategien fuer eine nachhaltige Zukunft. Mobil im Millenium - Entlastung fuer Mensch und Natur. Naturschutz - Die Anwaelte von Pflanzen und Tiere

Energy Technology Data Exchange (ETDEWEB)

Tempel, H.G.; Ulrich, M. [comps.; Zipf, M.

2000-07-01

This brochure presents the key issues in Federal German environmental policy. It provides a balance of the progress made so far and shows the goals and perspectives of the German government for environmental policy at the turn of the 21. century. [German] Die hier vorgelegte Broschuere verdeutlicht die Schwerpunkte der Umweltpolitik der Bundesregierung. Sie bilanziert die bisher erreichten Fortschritte und zeigt Ziele und Perspektiven fuer die Umweltpoltik an der Schwelle des 21. Jahrhunderts auf. (orig.)

Water quality and management - the use of models for the estimation of the hazard potential for groundwater by organic pollutants in solid waste; Gewaesserguete und Wasserwirtschaft - Anwendung von Modellen zur Abschaetzung der Grundwassergefaehrdung durch organische Stoffe aus Reststoffen

Energy Technology Data Exchange (ETDEWEB)

Klein, M.

2000-08-31

Abschaetzmodell MCPELMO 2.0 eingebaut. Im neuentwickelten MCPELMO 2.0 sind insgesamt 22 Versickerungsszenarien definiert, die auf einer Kombination der Bodenregionenkarte der Bundesrepublik Deutschland (12 Bodenregionen) mit 9 repraesentativen Klimastationen basieren, von denen taegliche Temperatur- und Niederschlagsdaten ueber einen Zeitraum von 30 Jahren vorlagen. Parallel zu der Modellentwicklung wurden Nomogramme auf der Basis der Algorithmen von MCPELMO 2.0 erstellt, mit denen die Sickerwasserkonzentrationen ebenfalls grafisch abgeschaetzt werden konnten. Die Ergebnisse des Simulationsprogramms MCPELMO 2.0 wurden mit ausfuehrlichen Simulationen ueber jeweils 1000 Jahre mit dem Computerprogramm PELMO verglichen. Die Analyse zeigte, dass das (im Vergleich mit PELMO) um Groessenordnungen schnellere Screeningmodell MCPELMO 2.0 in der Lage war, sinnvolle Konzentrationen im Sickerwasser fuer die meisten Substanzen abzuschaetzen. Darueber hinaus kann davon ausgegangen werden, dass die Abschaetzung im Vergleich mit einer ausfuehrlichen Simulation konservativ ist, das heisst das MCPELMO 2.0 die Konzentrationen tendenziell ueber- und nicht unterschaetzt. Geringere Konzentrationen als bei den ausfuehrlichen PELMO-Simulationen traten nur bei Substanzen mit KOC-Werten oberhalb von 5000 L/kg bzw. Halbwertszeiten oberhalb von 2000 Tagen auf. (orig.)

Transport of sediments in Himalaya-Karakorum and its influence on hydropower plants; Sedimenttransportprozesse im Himalaya-Karakorum und ihre Bedeutung fuer Wasserkraftanlagen

Energy Technology Data Exchange (ETDEWEB)

Palt, S.M.

2001-07-01

of a cascade of staircase local falls. Their distance in-between the falls as well as their height difference at the steps is strongly depending on the river slope. (orig.) [German] Die vorliegende Arbeit beschaeftigt sich mit den Sedimenttransportprozessen in alpinen Gebirgsregionen und deren Auswirkungen auf Wasserkraftanlagen. Ziel der Arbeit ist es, zum Verstaendnis des natuerlichen Sedimenttransportes mit der fuer Gebirgsregionen typischen Charakteristik von 'High Magnitude-Low Frequency - Prozessen' beizutragen, um eine den Transportverhaeltnissen geeignete Auslegung von geplanten Wasserkraftanlagen zu finden. Am Beispiel der Gebirgsregion des Himalaya-Karakorums werden die komplexen Transportvorgaenge im grossraeumigen Raum des Makromassstabes erlaeutert. Dabei wird auf die Massentransporte eingegangen, die durch Naturgefahren wie Erdbeben, Felsgleitungen, Erdrutsche, Muren, Gletscherbrueche und Hochwaesser ausgeloest werden. Der Schwerpunkt der Arbeit liegt in der Durchfuehrung von umfangreichen Naturmessungen im untergeordneten Raum des Mesomassstabes im Bereich von einzelnen Flussabschnitten. Die Naturmessungen umfassen morphologische und topographische Aufnahmen, Abfliessmessungen, Geschiebe- sowie Schwebstoffmessungen an 16 Gebirgsfluessen eines insgesamt 80000 km{sup 2} grossen Projektgebietes im Himalaya-Karakorum. Aufgrund der extremen Verhaeltnisse der Gebirgsfluesse der Region hinsichtlich vorhandener Korngroesse des Bettmaterials sowie die Groessenordnung der Fliessgeschwindigkeiten wurde fuer die Untersuchungen eigens der mobile Geschiebesammler B-69 entwickelt, gebaut und auf seine hydraulische und sedimentologische Effizienz hin geprueft. Der Einsatz des B-69 hat sich im Feld bewaehrt und ist fuer weitere Anwendungen bei Hochwasserereignissen in kiesfuehrenden Fluessen geeignet. Als massgebender Parameter zur Beschreibung der Morphologie, der Stroemung, der Sohlenstabilitaet und des Geschiebetransportes von Gebirgsfluessen im

External walls made of solar Lego bricks. Sulfurcell head office building: External wall construction according to the dimensions of Sulfurcell solar modules; Solare Legosteinfassade. Die Masse der hauseigenen Module bildeten den Ausgangspunkt fuer die Planung des Sulfurcell-Hauptquartiers

Energy Technology Data Exchange (ETDEWEB)

Wagner, Neelke

2009-11-15

The Sulfurcell Solartechnik GmbH constructed a new office building at Berlin-Adlershof. The building's external walls were designed on the basis of the frameless Sulfurcell standard module. The building intends to prove that solar modules are not a luxury item but an efficient and easy-to-handle constructional material. (orig.)

Analysis of an accident involving a battery of hydrogen flasks; Analyse eines Unfalls mit einer Flaschenbatterieanlage fuer Wasserstoff

Energy Technology Data Exchange (ETDEWEB)

Lietze, D. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

2000-09-01

When a hydrogen storage flask battery was used again after an outage period, a small section of the high-pressure collecting main burst. Luckily, the leaking hydrogen did not ignite and there were no fires or explosions causing secondary damage. The cause of failure was identified on the basis of extensive knowledge on pipeline loads shortly after detonative reactions. [German] Nach einer laengeren Pause kam es bei der Inbetriebnahme einer Wasserstoff-Flaschenbatterieanlage zum Bersten eines kleinen Teilstuecks der Hochdrucksammelleitung. Gluecklicherweise gab es keine Zuendung des an dieser Bruchstelle ausstroemenden Wasserstoffs und damit auch keine weiteren Sekundaerschaeden durch einen Brand bzw. durch eine Raumexplosion. Aufgrund der bei umfangreichen Untersuchungen ueber die Beanspruchung von Rohrleitungen bei detonativ verlaufenden Reaktionen gemachten Erfahrungen konnte die Ursache fuer diesen Schadensfall ermittelt werden. (orig.)

Characterization of a composite membrane for the conditioning of refined and natural gas; Charakterisierung einer Kompositmembran fuer die Konditionierung von Raffinerie- und Erdgas

Energy Technology Data Exchange (ETDEWEB)

Schonert, M. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Chemie

1999-07-01

The present diploma investigates the permeation behaviour of gas through a composite membrane. The selective layer of polyoctylmethylsiloxan is coated on porous support polyacrylnitrile layer. As this membrane should be used for the conditioning of refined and natural gas, (hydrocarbon-dew-pointing), the interest is focussed upon the permeation behaviour of methane and higher hydrocarbon. The permeability of single gas will be determined using the pressure increase method. The description of the permeability will be done through the free volume model. This model is a medium to describe the permeation behaviour of gas mixtures mathematically taking into account the real gas behaviour. The maximum feed pressure is 60 bar. It will be shown that the permeability of a multi component mixtures can be calculated satisfactorily with reduced mutual influence of the gas molecules. (orig.) [German] In der vorliegenden Arbeit wird das Permeationsverhalten von Gasen durch eine Kompositmembran untersucht. Die selektive Schicht aus Polyoctylmethylsiloxan ist auf einer poroesen Polyacrylnitril-Traegerschicht aufgebracht. Da die Membran fuer die Konditionierung von Raffinerie- und Erdgas (KW-Taupunkteinstellung) eingesetzt werden soll, liegt das Interesse in dem Permeationsverhalten von Methan und den hoeheren Kohlenwasserstoffen. Es wird die Permeabilitaet von Reingas mit Hilfe der Druckanstiegsmethode bestimmt. Die Beschreibung der Permeabilitaet geschieht durch das Modell des Freien Volumens. Hiermit wird versucht, das Permeationsverhalten von Gasgemischen unter Beruecksichtigung des Realgasverhaltens rechnerisch zu beschreiben. Der maximale Feeddruck betraegt 60 bar. Es wird gezeigt, dass sich die Permeabilitaet fuer ein Mehrkomponentengemisch mit reduzierter gegenseitiger Beeinflussung der Gasmolekuele zufriedenstellend berechnen laesst. (orig.)

Development of a modal model for the description of the chemistry and physics of clouds and aerosols and whose implementation in the EURAD-model-system for the description of modifications of the actinic flux caused by aerosols. Final report; Entwicklung eines modalen Modells zur Beschreibung der Chemie und Physik von Wolken und Aerosolen und dessen Implementierung in das EURAD-Modellsystem zur Beschreibung aerosolbedingter Modifikationen des aktinischen Flusses. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Friese, E.; Memmesheimer, M.; Ebel, A.; Kerschgens, M.

2001-07-01

In cooperation with the Ford Research Center Aachen a trimodal version of the Modal Aerosol Dynamics Model for Europe (MADE) has been developed further and implemented into the EURAD model system. Model components for aerosol cloud interactions and secondary organic aerosols have implemented. Parameterizations of aerosol cloud interactions have verified in cooperation with the Institut fuer Troposphaerenforschung (IFT) and the university of Cottbus (BTU). Model results for episodes in summertime and wintertime 1997 have compared with measurements of PM{sub 10}-concentrations from the department of the environment of Northrine-Westfalia. Inside the area of Northrine-Westfalia the modelled PM{sub 10}-concentrations are largely in agreement with the assessment principles for air quality models recommended by the European Union. Modelled sulphate and TSP-concentrations have compared with measurements at stations from the EMEP network. The developed aerosol dynamics model is useful for the realization and control of air quality directives passed by the European Union. The numerical simulation of modifications of the Actinic flux caused by aerosols have prepared. Technical problems remain concerning the numerical description of the size-composition distribution of cloud droplets. Furthermore the determination of the soot fraction of aerosol particles is very uncertain at the moment. For this reasons an implementation of the numerical simulation of modifications of the Actinic flux caused by aerosol particles have put on the back burner. (orig.) [German] In Kooperation mit dem Ford Forschungszentrum Aachen (FFA) wurde eine trimodale Version des Modalen Aerosol-Dynamik Modells fuer Europa (MADE) in das EURAD-Modellsystem implementiert und weiterentwickelt. Weiterhin wurden Module fuer die Wechselwirkungen von Aerosolen und Wolken sowie zur Bildung von sekundaerem organischen Aerosol implementiert. Die Funktionsfaehigkeit dieser Module wurde mit Modellrechnungen ueberprueft

Crash tests with Smartcrash barriers, a technology with a future; Zukunftssichere Crashtests mit Smartcrash-Barrieren

Energy Technology Data Exchange (ETDEWEB)

Barz, D.; Evers, W. [Kistler Instrumente AG (Switzerland). Geschaeftsbereich Fahrzeugmesstechnik

2005-02-01

The Smartcrash barrier by Kistler is a completely new technology. State-of-the-art data processing with Microdau modules is combined with a singular mechanical modularity which meets all requirements of present and future crash standards. Together with a piezo measuring system perfectly tuned to the highly dynamic processes during crash tests, this provides a basis for making crash laboratories economically efficient, with safe and accurate data, and compatible with other measuring systems. The system is a 'must' for every modern crash laboratory. (orig.) [German] Die Smartcrash-Barriere von Kistler setzt in jeder Hinsicht Massstaebe. Neueste Technologie der Datenverarbeitung beim Crash mit Microdau-Modulen, wie sie auch in Dummys eingesetzt werden, wird mit einer einzigartigen mechanischen Modularitaet kombiniert, die alle erforderlichen Voraussetzungen fuer bestehende und zukuenftige Crash-Standards bietet. In Verbindung mit der fuer die Messung von hochdynamischen Kraftverlaeufen beim Crash praedestinierte Piezo-Messtechnik ist hiermit die Basis geschaffen, Crash-Laboratorien wirtschaftlich und hinsichtlich des Datenakquisition sicher und kompatibel mit anderen Messgroessen im Labor auszuruesten. Ein 'Muss' fuer jedes moderne Crash-Labor. (orig.)

EFAM ETM 97 - the ETM method for assessing the significance of crack-like defects in engineering structures, comprising the versions ETM 97/1 and ETM 97/2

Energy Technology Data Exchange (ETDEWEB)

Schwalbe, K.H.; Zerbst, U.; Kim, Y.J.; Brocks, W.; Cornec, A.; Heerens, J. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung; Amstutz, H. [Technische Univ. Darmstadt (Germany). Fachgebiet Werkstoffmechanik

1998-09-01

EFAM ETM 97 is a document of the GKSS Procedure `Engineering Flaw Assessment Method (EFAM)`. It describes methods for estimating the crack driving force for cracks in structural components in terms of the crack tip opening displacement, {delta}{sub 5}, and the J-integral. It consists of several modules covering particular application problems. Appendices to this document provide solutions for the stress intenstiy factor and the yield load, as well as informtion on transferability of fracture parameters and on the treatment of bi-axial and mixed mode loadings. A second assessment route is also given in an appendix. (orig.) [Deutsch] EFM ETM 97 ist ein Dokument der GKSS-Prozedur `Engineering Flaw Assessment Method (EFAM)`. Es beschreibt Methoden zur Abschaetzung der bruchmechanischen Beanspruchung fuer Risse in Bauteilen in Form der Rissspitzenverschiebung {delta}{sub 5} oder des J-Integrals. Es besteht aus mehreren Moduln fuer bestimmte Anwendungsprobleme. In Anhaengen werden Loesungen fuer den Spannungsintensitaetsfaktor und die Fliesslast, Informationen zur Uebertragbarkeit von Kennwerten und zur Behandlung von biaxialer und Mixed-Mode-Beanspruchung angeboten. Eine zweite Bewertungsroute ist in einem weiteren Anhang beschrieben. (orig.)

Establishing design criteria for crankshaft thrust bearings in gasoline and diesel engines by computer simulations and experiments. Crankshaft thrust bearing design - final report; Auslegungskriterien fuer Kurbelwellenaxiallager in Otto- und Dieselmotoren durch rechnergestuetzte Simulation und experimentelle Untersuchungen. Axialgleitlagerauslegung - Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Hunsicker, W. [Fachhochschule Mannheim (Germany). Inst. fuer Tribologie; Backhaus, K. [Univ. GH Kassel (Germany). Inst. fuer Maschinenelemente und Konstruktionstechnik; Schubert, W. [KS Gleitlager GmbH, Papenburg (Germany)

2004-07-01

Aim of the research-project was it to increase the calculation safety of crank shaft thrust bearings in combustion engines. The project was divided in two parts: (1) A simulation program to analyze the load bearing capacity of axial bearings under mixed lubrication has been developed at the Institut fuer Maschinenelemente und Konstruktionstechnik, University of Kassel. This part of the research-project has been presented at the FVV Herbsttagung in 2003. (2) The test runs with original parts were carried out on a newly designed thrust bearing test rig at the Institut fuer Tribologie, University of Applied Sciences in Mannheim. The following presentation shows the results of part 2. The experimental results show the influence of rotational frequency, load, bearing material, lateral run-out of the tread of the crankshaft and groove pattern. These test runs will help to dimension thrust bearings more efficiently. (orig.)

Module theory, extending modules and generalizations

CERN Document Server

Tercan, Adnan

2016-01-01

The main focus of this monograph is to offer a comprehensive presentation of known and new results on various generalizations of CS-modules and CS-rings. Extending (or CS) modules are generalizations of injective (and also semisimple or uniform) modules. While the theory of CS-modules is well documented in monographs and textbooks, results on generalized forms of the CS property as well as dual notions are far less present in the literature. With their work the authors provide a solid background to module theory, accessible to anyone familiar with basic abstract algebra. The focus of the book is on direct sums of CS-modules and classes of modules related to CS-modules, such as relative (injective) ejective modules, (quasi) continuous modules, and lifting modules. In particular, matrix CS-rings are studied and clear proofs of fundamental decomposition results on CS-modules over commutative domains are given, thus complementing existing monographs in this area. Open problems round out the work and establish the...

Development of a monitor system for gas based detectors and measurement of electron attachment in the chamber gas; Aufbau eines Monitorsystems fuer gasbasierte Detektoren und Messung der Elektronenanlagerung im Kammergas

Energy Technology Data Exchange (ETDEWEB)

Linzmaier, Diana

2009-01-15

In the framework of an international collaboration a new electron-positron linear accelerator (ILC) with a c. m. energy up to 500 GeV is planned. For the International Large Detector Concept (ILD) a time projection chamber (TPC) shall perform precise measurements of the particle tracks. In order to fulfil the high requirements on the resolution, a microstructure gas-amplification system is used for read-out. For research and development of the detector principle for the application at the ILC at DESY a large TPC prototype is developed. For the operation of the detector it is necessary to monitor its state and especially that of the measurement gas. For this purpose in the framework of this thesis a slow control system is built, which shall make possible for the different collaboration partners to operate the prototype and to integrate the slow control data into their measurement. For this with an object-oriented control system a graphic user interface was created, which makes an overview over the applied measurement devices and a driving allows. Furthermore the influence of impurities of the gas mixture by oxygen was studied. For this with a small TPC prototype measurements of the electron attachment coefficient at different oxygen concentrations were performed with a magnetic flux density of 4 T. From the amplitude of the measurement signal a rate for the electron attachment could be determined. The values obtained for this agree sufficiently in comparison with literature values. [German] Im Rahmen einer internationalen Kollaboration ist ein neuer Elektronen-Positronen-Linearbeschleuniger (ILC) mit einer Schwerpunktsenergie bis zu 500 GeV geplant. Fuer das International Large Detector Concept (ILD) soll eine Zeitprojektionskammer (TPC) praezise Vermessungen der Teilchenspuren durchfuehren. Um die hohen Anforderungen an die Aufloesung zu erfuellen, wird ein Mikrostruktur-Gasverstaerkungssystem zur Auslese verwendet. Zur Erforschung und Entwicklung des

Development of an early warning system for strong environmental pollution by measuring the activation of defined universally existing stress genes. Final report; Das Auftreten spezifischer Stressproteine bei Umweltbelastung in Chironomiden: Entwicklung eines neuen Fruehwarnsystems fuer starke Umweltbelastung durch Messung der Aktivierung definierter, universell vorkommender Stressgene bei ausgewaehlten Indikatororganismen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Kloetzel, P.M.; Mueller, W.

1991-12-31

In the present pilot study we established an ELISA based detection system which allows sensitive monitoring of stress induction as a result of heavy metal pollution. The system is based on the immunological detection of the stress induced hsp70 in larvae of Chironomidae. Using this system it is possible to detect environmental pollution by heavy metals far beyond lethal toxicity values. Since only very few animals are needed the system can also be used in field tests. For poluted isopodes as Oniscus asellus for example a single animal turned out be sufficient to monitor stress induction by Pb{sup +}. The established system ought to serve as basis for a more extended study in which different animals are collected from various polluted environments and tested with respect to already induced hsp synthesis. (orig.) [Deutsch] In der vorliegenden Pilotstudie konnte ein sensitives Nachweissystem fuer die Induktion des ubiquitaeren Stresssystem durch Schwermetalle auf der Basis der immunologischen Detektion von HSP70 etabliert werden. Dieses, auf ELISA Basis arbeitende Testverfahren ermoeglicht es Schwermetallbelastungen weit unterhalb der Toxizitaetsgrenze ueber die Induktion der HSP70 Synthese in Chironomidenlarven nachzuweisen. Die Tatsache, dass nur wenige Tiere fuer eine statistische Aussage benoetigt werden laesst eine Anwendungsmoeglichkeit auch auf Freilandtiere erwarten. So reicht fuer bleibelastete Freiland-Asseln ein einziges Tier zum immunologischen Belastungsnachweis aus. Damit sind die Grundlagen fuer die zweite Phase, die Freilandphase, in welcher sowohl Freilandtiere als auch Gewaesser- und Sedimentproben von verschiedenen Standorten in die Untersuchungen miteinbezogen werden sollen; geschaffen. Es koennen jetzt Tiere aus belasteten Gewaessern bezueglich bereits erfolgter Stressproteinproduktion aber auch auf eine Neuinduzierbarkeit nach zusaetzlicher Laborbelastung untersucht werden. Ebenso koennen Labortiere auf ihre Reaktion gegenueber belasteten

VMEbus based computer and real-time UNIX as infrastructure of DAQ

International Nuclear Information System (INIS)

Yasu, Y.; Fujii, H.; Nomachi, M.; Kodama, H.; Inoue, E.; Tajima, Y.; Takeuchi, Y.; Shimizu, Y.

1994-01-01

This paper describes what the authors have constructed as the infrastructure of data acquisition system (DAQ). The paper reports recent developments concerned with HP VME board computer with LynxOS (HP742rt/HP-RT) and Alpha/OSF1 with VMEbus adapter. The paper also reports current status of developing a Benchmark Suite for Data Acquisition (DAQBENCH) for measuring not only the performance of VME/CAMAC access but also that of the context switching, the inter-process communications and so on, for various computers including Workstation-based systems and VME board computers

Numerical simulation of thermal radiation from smoking flames; Numerische Simulation der Waermestrahlung von russenden Flammen

Energy Technology Data Exchange (ETDEWEB)

Koch, T. [Duisburg Univ. (Gesamthochschule) (Germany). Lehrstuhl fuer Technische Chemie; Staus, S. [Duisburg Univ. (Gesamthochschule) (Germany). Lehrstuhl fuer Technische Chemie; Schoenbucher, A. [Duisburg Univ. (Gesamthochschule) (Germany). Lehrstuhl fuer Technische Chemie

1997-08-01

After presenting the most common semi-empirical simulation model, the authors describe the newly developed field model and its modules with their mathematical and physical fundamentals. First results are presented for the calculation of a diffusion flame. (orig./GL) [Deutsch] In der vorliegenden Arbeit wird, nach einer Darstellung der gebraeuchlichen halbempirischen Simulationsmodelle, das entwickelte Feldmodell beschrieben und seine einzelnen Module mit ihren mathematischen und physikalischen Grundlagen vorgestellt. Im Anschluss werden erste Ergebnisse fuer die Berechnung einer Diffusionsflamme aufgezeigt. (orig./GL)

Facilities granted by the authorities to companies certified in accordance with the EC Eco-Audit Ordinance; Behoerdliche Erleichterungen fuer validierte Unternehmen nach der EG-Oeko-Audit-Verordnung

Energy Technology Data Exchange (ETDEWEB)

Funda, K. [Witzenhausen-Institut fuer Abfall, Umwelt und Energie, Witzenhausen (Germany)

1999-07-01

During the past few years there has been a growing discussion on possible ways of granting facilities and allowing simplified legal procedures for companies which have been certified according to the EU Eco-Audit Regulation and which have thus submitted themselves voluntarily to the requirements of this code. This paper gives an account of the current stage of the discussion and describes the facilities currently granted by the German federal states to certified companies. It is largely based on the relevant regulations and decrees issued by the federal states as chief enactors of environmental law and on information given orally and in writing by the various ministries involved in the data search carried out between January and March 1999. [German] In den letzten Jahren wurde zunehmend die Frage nach ordnungsrechtlichen Erleichterungen und Vereinfachungen fuer Unternehmen diskutiert, die eine Validierung nach der EG-Oeko-Audit-Verordnung durchgefuehrt und sich damit freiwillig den Anforderungen dieses Regelwerkes unterworfen haben. Der vorliegende Beitrag versucht den aktuellen Stand dieser Diskussion zu beleuchten und die zur Zeit von den Bundeslaendern eingeraeumten Erleichterungen fuer Unternehmen darzustellen. Grundlage der Aussagen sind im wesentlichen die einschlaegigen Vorschriften und Erlasse der Laender, in deren Hand zum groessten Teil der Vollzug des Umweltrechtes liegt, sowie muendliche und schriftliche Informationen aus den verschiedenen Fachministerien, die im Rahmen einer Datenrecherche zwischen Januar und Maerz 1999 zusammengetragen wurden. (orig.)

Emission concepts for future passenger car diesel engines; Emissionskonzepte fuer zukuenftige Pkw-Dieselmotoren

Energy Technology Data Exchange (ETDEWEB)

Krueger, M.; Wiartalla, A.; Lichtenberg, T.; Koerfer, T. [FEV Motorentechnik, Aachen (Germany)

2003-07-01

guenstigen Kraftstoffverbrauch eines Dieselfahrzeugs beizubehalten. Vor diesem Hintergrund werden im Rahmen dieses Beitrages brennverfahrensseitige Massnahmen sowie Abgasnachbehandlungskonzepte hinsichtlich Wirkungsgrad undd Einfluss auf den Kraftstoffverbrauch analysiert. Es kann festgehalten werden, dass fuer den Pkw-Dieselmotor noch ein beachtliches Emissionsreduktionspotenzial erschlossen werden kann. Eine Erfuellung der nach 2005 diskutierten bzw. schon beschlossenen Emissionsgrenzwerte allein durch Weiterentwicklung des Brennverfahrens erscheint allerdings aus heutiger Sicht als schwierig. Insbesondere vor dem Hintergrund des Kraftstoffverbrauchs stellt sich eine geeignete Kombination von innermotorischen Massnahmen und Abgasnachbehandlung als der sinnvollere Weg dar. Entscheidend fuer den Erfolg eines solchen Konzeptes wird die Leistungsaufnahme der Abgasnachbehandlungsmassnahme im weitesten Sinne sein. Dazu zaehlt sicherlich das Thermomanagement von Motor und Abgassystem. Darueber hinaus muessen aber auch die Faktoren beruecksichtigt werden, die das Regenerationsverhalten der diskontinuierlich betriebenen Nachbehandlungssysteme Partikelfilter und NO{sub x}-Speicherkatalysator bestimmen. Hier sind in erster Linie das Kraftstoffadditiv und der Kraftstoffschwefel bzw. die Schwefelproblematik des NO{sub x}-Speicherkatalysators zu nennen. (orig.)

Guide to the construction of small-scale hydropower plants; 2. ed.; Leitfaden fuer den Bau von Kleinwasserkraftanlagen

Energy Technology Data Exchange (ETDEWEB)

Berg, W.; Giesecke, J.; Grabitz, R.; Haakh, F.; Haury, H.G.; Horlacher, H.B.; Hutarew, A.; Latrille, W.; Mackert, W.; Mueller, P.; Sauer, K.; Schmid, H.; Schweickert, H.; Waller, H.

1994-12-31

Hydropower plays a prominent role in Baden-Wuerttemberg`s policy of promoting the use of renewable energy resources. This is due, firstly, to the fact that hydropower is a reliable, proven technology, and secondly to the favourable topographic and hydrological conditions Baden-Wuerttemberg offers for the development of hydropower. The Baden-Wuerttembergian Water Management Association hopes that this guide will provide the interested reader with sufficient information for assessing or initiating concrete projects. The individual chapters have been adapted from papers of the team of authors referred to in the foreword. They are largely representative of the Federal German Republic (Baden-Wuerttemberg). The guide thus provides a complement to the Manual of the International Electrotechnical Commission, the first German translation of which is contained in chapter 3. As this manual is required to be valid worldwide, it must necessarily be confined to technical and process organisational matters. The editors have been at pains t provide a concrete, practice-oriented rather than a textbook-like presentation of the subject. The Water Management Association and the authors hope that this guide will stimulate public interest in the continued development of small-scale hydropower plants in compliance with energy-political, private-economical, and ecological requirements. (orig.) [Deutsch] Die Wasserkraft nimmt im Hinblick auf eine staerkere Hinwendung zu regenerativen Energiequellen eine Vorreiterstellung in Baden-Wuerttemberg ein. Dies liegt in der zuverlaessigen und erprobten Technologie begruendet und in den guenstigen topographischen und hydrologischen Voraussetzungen fuer die Wasserkraftnutzung in Baden-Wuerttemberg. Der Wasserwirtschaftsverband Baden-Wuerttemberg hofft, mit dem `Leitfaden` den Interessenten genuegend Informationen an die Hand gegeben zu haben, die zur Beurteilung und gegebenenfalls zur Inangriffnahme eines konkreten Projektes erforderlich sind. Die

United Nations conference of environment and development, held at Rio de Janeiro in June 1992. Documents. Agenda 21; Konferenz der Vereinten Nationen fuer Umwelt und Entwicklung im Juni 1992 in Rio de Janeiro. Dokumente. Agenda 21

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

With the translation of Agenda 21 all the documents released in connection with the United Nations Conference of Environment and Development (UNCED) at Rio de Janeiro (June 1992) have now been made generally available also in the German language. Agenda 21, which in 40 chapters discusses the basic political platforms of environment-oriented sustainable development, is an action programme for the 21st century adopted at Rio by more than 170 states. The action programme contains detailed instructions as to the practices to be abandoned to prevent any further deteriorations as well as strategies to be adopted to gradually relieve the situation and to ensure a reasonable and sustainable exploitation of our natural resources. One important approach to this goal is that environmental issues are considered within a global context, thus being a prominent factor in all political spheres. The rules set up in this action programme are applicable to industrial and developing countries alike. It offers - in broad outline - prescriptions for the combatting poverty, control of overpopulation, reconciliation of commercial and environmental interests, disposal of refuse and chemicals, for climate, energy and agricultural policies as well as the ways in which industrial and developing countries could cooperate both financially and in terms of shared technologies. The bilateral and multilateral development policies of the Federal Government are largely based on Agende 21. (orig./HP) [Deutsch] Mit der Uebersetzung der Agenda 21 sind nunmehr alle Dokumente der Konferenz fuer Umwelt und Entwicklung der Vereinten Nationen (UNCED) in Rio de Janeiro (June 1992) auch in deutscher Sprache der Oeffenlichkeit zugaenglich. Die Agenda 21, die mit ihren 40 Kapiteln alle wesentlichen Politikbereiche einer umweltvertraeglichen, nachhaltigen Entwicklung anspricht, ist das in Rio von mehr als 170 Staaten verabschiedete Aktionsprogramm fuer das 21. Jahrhundert. Mit diesem Aktionsprogramm werden

Fully automated VMAT treatment planning for advanced-stage NSCLC patients

Energy Technology Data Exchange (ETDEWEB)

Della Gala, Giuseppe [Erasmus MC Cancer Institute, Department of Radiation Oncology, Rotterdam (Netherlands); Universita di Bologna, Scuola di Scienze, Alma Mater Studiorum, Bologna (Italy); Dirkx, Maarten L.P.; Hoekstra, Nienke; Fransen, Dennie; Pol, Marjan van de; Heijmen, Ben J.M. [Erasmus MC Cancer Institute, Department of Radiation Oncology, Rotterdam (Netherlands); Lanconelli, Nico [Universita di Bologna, Scuola di Scienze, Alma Mater Studiorum, Bologna (Italy); Petit, Steven F. [Erasmus MC Cancer Institute, Department of Radiation Oncology, Rotterdam (Netherlands); Massachusetts General Hospital - Harvard Medical School, Department of Radiation Oncology, Boston, MA (United States)

2017-05-15

To develop a fully automated procedure for multicriterial volumetric modulated arc therapy (VMAT) treatment planning (autoVMAT) for stage III/IV non-small cell lung cancer (NSCLC) patients treated with curative intent. After configuring the developed autoVMAT system for NSCLC, autoVMAT plans were compared with manually generated clinically delivered intensity-modulated radiotherapy (IMRT) plans for 41 patients. AutoVMAT plans were also compared to manually generated VMAT plans in the absence of time pressure. For 16 patients with reduced planning target volume (PTV) dose prescription in the clinical IMRT plan (to avoid violation of organs at risk tolerances), the potential for dose escalation with autoVMAT was explored. Two physicians evaluated 35/41 autoVMAT plans (85%) as clinically acceptable. Compared to the manually generated IMRT plans, autoVMAT plans showed statistically significant improved PTV coverage (V{sub 95%} increased by 1.1% ± 1.1%), higher dose conformity (R{sub 50} reduced by 12.2% ± 12.7%), and reduced mean lung, heart, and esophagus doses (reductions of 0.9 Gy ± 1.0 Gy, 1.5 Gy ± 1.8 Gy, 3.6 Gy ± 2.8 Gy, respectively, all p < 0.001). To render the six remaining autoVMAT plans clinically acceptable, a dosimetrist needed less than 10 min hands-on time for fine-tuning. AutoVMAT plans were also considered equivalent or better than manually optimized VMAT plans. For 6/16 patients, autoVMAT allowed tumor dose escalation of 5-10 Gy. Clinically deliverable, high-quality autoVMAT plans can be generated fully automatically for the vast majority of advanced-stage NSCLC patients. For a subset of patients, autoVMAT allowed for tumor dose escalation. (orig.) [German] Entwicklung einer vollautomatisierten, auf multiplen Kriterien basierenden volumenmodulierten Arc-Therapie-(VMAT-)Behandlungsplanung (autoVMAT) fuer kurativ behandelte Patienten mit nicht-kleinzelligem Bronchialkarzinom (NSCLC) im Stadium III/IV. Nach Konfiguration unseres auto

Aircraft Research Guideline 1999 - 2002: High pressure compressor - preliminary design as a basis for the development of an efficient and environmentally friendly core engine. Final report; Leitlinie Luftfahrtforschung 1999 - 2002: Hochdruckverdichter-Vorauslegung als Grundlagenuntersuchung zur Entwicklung eines Kerntriebwerkes fuer einen effizienten und umweltfreundlichen Antrieb. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Klinger, H.

2001-08-01

This report completes the documentation for the research project 'High Pressure Compressor - Preliminary Design as Basis for the Development of an Efficient and Environmentally Friendly Core Engine' which was funded by the Ministry of Economics of State Brandenburg. The objective of the project is to deliver a preliminary compressor aerodynamic design as well as design studies for an efficient, weight and cost improved compressor. The increase of stage pressure ratio and improved efficiency, whilst stage and blade count is reduced, has been achieved by advanced 3D methods. Compressor stability also at off-design conditions will be retained. The mechanical design focusses on a cost and weight optimised rotor not only for a conventional bladed discs but also for Blish stages. Various options for split casings have been developed and assessed. Alternative vortex reducers based on different design options have been carried out. The results from this project will be directly exploited in a follow-on project for a new nine-stage compressor. The new high pressure compressor will be a key element of the future two-shaft-engine architecture. (orig.) [German] Der vorliegende Bericht schliesst das vom Land Brandenburg im Rahmen der Leitlinie Luftfahrtforschung gefoerderte Vorhaben 'Hochdruckverdichter - Vorauslegung als Grundlagenuntersuchung zur Entwicklung eines Kerntriebwerkes fuer einen effizienten und umweltfreundlichen Antrieb' ab. Ziel dieses Vorhabens ist es, im Rahmen einer aerodynamischen Vorauslegung sowie Designstudien die notwendigen Technologien zu erarbeiten, um einen hinsichtlich Effizienz, Kosten, Gewicht und Wartungsintervallen verbesserten Hochdruckverdichter auszulegen. Die Erhoehung des Druckverhaeltnisses und des Wirkungsgrads bei verringerter Stufen- und Schaufelzahl sowie ein stabiles Betriebsverhalten auch ausserhalb des Auslegungspunktes wurde dabei durch eine aeusserst fortschrittliche 3D Schaufelauslegung erreicht. Auf der

ILSE - an attractive tutoring system for renewable energy on the Internet; ILSE - Ein interaktives Lernsystem fuer erneuerbare Energien im Internet

Energy Technology Data Exchange (ETDEWEB)

Quaschning, V.; Hanitsch, R. [Technische Univ. Berlin (Germany). Inst. fuer Elektrische Energietechnik

1997-12-31

Experiences gained by members of the Berlin Universiy of Technology show that information on solar energy plants is increasingly being accessed on the Internet also by non-scientists. This led the authors of the present article to the idea of developing an interactive tutoring system for renewable energy which goes far beyond a mere presentation of information and graphics. The article describes ILSE, the system that finally emerged from this initiative. (HW) [Deutsch] Die Erfahrungen der TU Berlin zeigen, dass in zunehmendem Masse auch Nicht-Wissenschaftler Informationen zu Solarsystemen ueber den Internetzugang abfragen. Hieraus entstand die Idee, das interaktive Lernsystem fuer erneuerbare Energie ILSE zu entwickeln, das ueber die reine Darstellung von Informationen und Grafiken weit hinausgeht. Das System wird vorgestellt. (HW)

PROFIBUS-DP. Fundamentals and hints for users; PROFIBUS-DP. Grundlagen, Tips und Tricks fuer Anwender

Energy Technology Data Exchange (ETDEWEB)

Popp, M.

1998-04-01

PROFIBUS-DP is one of the most common field buses for industrial communication. The author provides competent help in using this technology. He describes 32 of the most common errors found in certification tests and shows how they can be remedies. Fundamentals and enhancements of PROFIBUS-DP are presented. PROFIBUS-DP telegrams for data interpretation are discussed at length, as are extensive GSD files. Particular emphasis is given to the projecting and commissioning of a system and practical guides for installation. (orig.) [Deutsch] PROFIBUS-DP gehoert zu den am haeufigsten eingesetzten Feldbussen fuer die industrielle Kommunikation. Der Autor bietet in diesem umfassenden Werk kompetente Unterstuetzung bei der Anwendung dieser Feldbustechnik. Es werden 32 der haeufigsten Fehler, die bei Zertifizierungstests festgestellt wurden, beschrieben und Wege zu ihrer Behebung dargestellt. Die Grundlagen von PROFIBUS-DP werden erlaeutert und die PROFIBUS-Erweiterungen vorgestellt. PROFIBUS-DP-Telegramme zur Interpretation des Datenverkehrs werden genauso detailliert erklaert wie eine umfangreiche GSD-Datei. Ein besonderer Schwerpunkt ist die Projektierung und Inbetriebnahme einer Anlage und den praxisgerechten Aufbaurichtlinien gewidmet. (orig./GL)

Actively controlled current collector; Aktiv geregelter Stromabnehmer. Innovation fuer den schnellen Verkehr auf konventionellen Strecken

Energy Technology Data Exchange (ETDEWEB)

Mueller, C.

2003-07-01

Deutsche Bahn is presently endeavouring to further improve the interaction between the overhead wire and the current collectors on its locomotives and trainsets. The major factors behind this initiative are cost, quality and noise prevention. The outcome is the development of a completely new type of current collector for high-speed operation even on conventional track. Prototypes have meanwhile undergone practical trials on the 200 km/h line from Augsburg to Donauwoerth. The new current collector is a single-arm pantograph jointly developed by DB and Bombardier Transportation. (orig.) [German] Die Deutsche Bahn versucht derzeit, das Zusammenspiel von Oberleitung und den Stromabnehmern ihrer Lokomotiven und Triebzuege weiter zu verbessern. Kosten, Qualitaet und Laermschutz sind dabei die wesentlichen Gruende. Sie haben zur Entwicklung eines voellig neuen Stromabnehmer-Typus speziell fuer den Hochgeschwindigkeitsverkehr auch auf konventionellen Strecken gefuehrt. Auf der Tempo-200-Strecke von Augsburg nach Donauwoerth absolvierten jetzt Prototypen erste Praxis-Tests. Es handelt sich um aktiv geregelte, akustisch optimierte Einholmstromabnehmer, gemeinsam entwickelt von DB und Bombardier Transportation. (orig.)

Silage seepage and water protection. Production and recovery of silage seepage from animal feed and biomass for biogas plants. 7. ed.; Silagesickersaft und Gewaesserschutz. Anfall und Verwertung von Silagesickersaft aus Futtermitteln und Biomasse fuer Biogasanlagen

Energy Technology Data Exchange (ETDEWEB)

Spiekers, Hubert [Bayerische Landesanstalt fuer Landwirtschaft (LfL), Freising-Weihenstephan (Germany); Attenberger, Erwin [Bayerisches Landesamt fuer Umwelt, Augsburg (Germany)

2012-11-15

The production of silage is now standard and an important basis for a successful milk and beef production. Silage is also needed in agricultural biogas plants as a substrate for energy production. This publication is intended to serve agriculture as a source of information and guidance document for the construction and operation of silos and the administration as an orientating work aid. The factors influencing the accumulation of silage seepage and the possibilities of prevention in silage and silage management are presented and evaluated from environmental and legal perspective. [German] Die Produktion von Silage ist heute Standard und eine wichtige Grundlage fuer eine erfolgreiche Milch- und Rindfleischerzeugung. Silage wird auch in landwirtschaftlichen Biogasanlagen als Substrat zur Energieerzeugung benoetigt. Die vorliegende Publikation soll der Landwirtschaft als Informationsquelle und Handlungsanleitung fuer den Bau und Betrieb von Siloanlagen und der Verwaltung als orientierende Arbeitshilfe dienen. Die Einflussgroessen auf den Anfall an Sickersaeften und die Moeglichkeiten der Vermeidung bei der Silierung und dem Silagemanagement werden dargestellt und aus umwelt- und rechtlicher Sicht bewertet.

Energy use and management at large sports facilities. Load projections for the BayArena; Moeglichkeiten des Energieeinsatzes in Grosssportstaetten. Lastprognosen fuer die BayArena

Energy Technology Data Exchange (ETDEWEB)

Hollekamp, H. [Bayer 04 Leverkusen Fussball GmbH, Leverkusen (Germany)

2002-05-21

The article describes energy management aspects ensuring uninterrupted energy supply during events in the BayArena, one of Germany's most modern sports arenas and a huge soccer stadium. (orig./CB) [German] Die BayArnea in Leverkusen ist eines der modernsten Fussballstadien und erfuellt die hohe Anforderung, einen unterbrechungsfreien Spielbetrieb zu gewaehrleisten. Grosssportstaetten sind heute ein wichtiger Faktor fuer die Freizeitindustrie. Der Spielbetrieb in den Bundesligastadien benoetigt nur kurzzeitig einige MW Energie. Dabei ist allerdings eine sichere Versorgung unabdingbar. Der zu erwartende Energiebedarf sollte mit einer fundierten Lastprognose ermittelt werden. Der Verfasser beschreibt die Energieversorgung und -lastverlaeufe einer multifunktionalen Fussballarena. (orig.)

CuRa: Cooperation on non-polluting resource exchange for cost reduction. Final report; CuRa: Cooperation fuer umweltschonenden Ressourcenaustausch zur Nutzung von Kostenreduktionspotenzialen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Schoen, M.; Delahaye, F.; Hiessl, H.; Kotz, C.; Kuntze, U.; Matuschweski, A.; Schuenke, P.; Zoche, P.; Hafkesbrink, J.; Rebhan, A.; Schroll, M.

2003-02-01

The project CuRa: (German acronym for Cooperation for Environmentally Friendly Exchange of Resources) aimed to design elements to put into practice the model of sustainable development. The focus was on the participation of industry and business on a regional level and two model regions were chosen for the analysis of case studies. It was intended to give impulses for regional material flow networks between companies, for example by bundling similar material flows to achieve a better profitability and by one-to-one cooperation between companies, one of them using the waste of the partner as raw material. In addition, the potential for reducing material throughput using modern information technology was investigated in a case study. A set of theses derived from institutional theory was verified on the basis of the empirical results. Useful for the development and the stabilization of networks are, among others, expected economic benefits for the partners, common socio-cultural values and traditions, and using existing institutional arrangements as a basis. Different forms of market and policy failures were identified as obstacles, e.g. the established system of waste disposal services, the focus among the responsible actors on compliance with existing rules, and different regulatory obstacles. Nevertheless, in spite of the insufficient number of successful examples and demonstration projects, a shift in orientation from focusing on mere waste disposal towards a closed loop recycling economy and even towards sustainable development was identified within the commercial sector. (orig.) [German] Im Projekt CuRa: (Cooperation fuer umweltschonenden Ressourcenaustausch) sollten in zwei Modellregionen Bausteine fuer die operative Umsetzung des Leitbildes nachhaltiger Entwicklung durch regionale Akteure aus Industrie und Gewerbe entwickelt werden. Es sollte ein Anstoss zu zwischen- und ueberbetrieblicher Vernetzung von Materialfluessen sowie zu einer Umgestaltung der

Agricultural ecosystem modelling. The basis for assessing the impact of possible land-use and climate changes. Final report; Agrooekosystemmodellierung. Grundlage fuer die Abschaetzung von Auswirkungen moeglicher Landnutzungs- und Klimaaenderungen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Wenkel, K.O. [ed.; Mirschel, W. [ed.

1995-12-31

This report presents the results of the BMBF-sponsored project Fundamentals and models for assessing the effect of climate changes on soil, plant development and the crops of an economically significant range of farm products. Its aim was to study, by means of the results obtained for winter wheat, the dependence of plant growth on temperature, radiation and water as well as nutrient supply for other economically important crop types. Building on this, process-oriented, climate-sensitive agricultural ecosystem models for winter rye, winter barley, sugar-beet and winter intercrops were developed, verified and, in some sites, validated. First scenario calculations served to demonstrate the climate sensitivity of these models. (orig./KW) [Deutsch] Im vorliegenden Bericht werden die Ergebnisse des BMBF - Vorhabens `Grundlagen und Modelle zur Abschaetzung von Klimaaenderungen auf den Boden, die Pflanzenentwicklung sowie den verwertbaren Ernteertrag einer wirtschaftlich bedeutenden Marktfruchtfolge` vorgestellt. Ziel des Vorhabens war es, auf der Grundlage der Erkenntnisse zur Fruchtart Winterweizen die Abhaengigkeit des Pflanzenwachstums von Temperatur, Strahlung sowie Wasser- und Naehrstoffversorgung fuer weitere wirtschaftlich bedeutende landwirtschaftliche Fruchtarten zu untersuchen und auf diesen Ergebnissen aufbauend prozessorientierte klimasensitive Agrooekosystemmodelle fuer Winterroggen, Wintergerste, Zuckerrueben und Winterzwischenfruechte zu entwickeln, zu verifizieren und an einigen Standorten zu validieren. Mit Hilfe von ersten Szenariorechnungen war die Klimasensibilitaet dieser Modelle nachzuweisen. (orig./KW)

Irreducible Specht modules are signed Young modules

OpenAIRE

Hemmer, David J.

2005-01-01

Recently Donkin defined signed Young modules as a simultaneous generalization of Young and twisted Young modules for the symmetric group. We show that in odd characteristic, if a Specht module $S^\\lambda$ is irreducible, then $S^\\lambda$ is a signed Young module. Thus the set of irreducible Specht modules coincides with the set of irreducible signed Young modules. This provides evidence for our conjecture that the signed Young modules are precisely the class of indecomposable self-dual module...

The ACP [Advanced Computer Program] multiprocessor system at Fermilab

International Nuclear Information System (INIS)

Nash, T.; Areti, H.; Atac, R.

1986-09-01

The Advanced Computer Program at Fermilab has developed a multiprocessor system which is easy to use and uniquely cost effective for many high energy physics problems. The system is based on single board computers which cost under $2000 each to build including 2 Mbytes of on board memory. These standard VME modules each run experiment reconstruction code in Fortran at speeds approaching that of a VAX 11/780. Two versions have been developed: one uses Motorola's 68020 32 bit microprocessor, the other runs with AT and T's 32100. both include the corresponding floating point coprocessor chip. The first system, when fully configured, uses 70 each of the two types of processors. A 53 processor system has been operated for several months with essentially no down time by computer operators in the Fermilab Computer Center, performing at nearly the capacity of 6 CDC Cyber 175 mainframe computers. The VME crates in which the processing ''nodes'' sit are connected via a high speed ''Branch Bus'' to one or more MicroVAX computers which act as hosts handling system resource management and all I/O in offline applications. An interface from Fastbus to the Branch Bus has been developed for online use which has been tested error free at 20 Mbytes/sec for 48 hours. ACP hardware modules are now available commercially. A major package of software, including a simulator that runs on any VAX, has been developed. It allows easy migration of existing programs to this multiprocessor environment. This paper describes the ACP Multiprocessor System and early experience with it at Fermilab and elsewhere

Cam-driven monochromator for QEXAFS

Energy Technology Data Exchange (ETDEWEB)

Caliebe, W.A. [National Synchrotron Light Source, Brookhaven National Laboratory, Upton, NY 11973 (United States); So, I. [National Synchrotron Light Source, Brookhaven National Laboratory, Upton, NY 11973 (United States); Lenhard, A. [National Synchrotron Light Source, Brookhaven National Laboratory, Upton, NY 11973 (United States); Siddons, D.P. [National Synchrotron Light Source, Brookhaven National Laboratory, Upton, NY 11973 (United States)

2006-11-15

We have developed a cam-drive for quickly tuning the energy of an X-ray monochromator through an X-ray absorption edge for quick extended X-ray absorption spectroscopy (QEXAFS). The data are collected using a 4-channel, 12-bit multiplexed VME analog to digital converter and a VME angle encoder. The VME crate controller runs a real-time operating system. This system is capable of collecting 2 EXAFS-scans in 1 s with an energy stability of better than 1 eV. Additional improvements to increase the speed and the energy stability are under way.

Cam-driven monochromator for QEXAFS

Science.gov (United States)

Caliebe, W. A.; So, I.; Lenhard, A.; Siddons, D. P.

2006-11-01

We have developed a cam-drive for quickly tuning the energy of an X-ray monochromator through an X-ray absorption edge for quick extended X-ray absorption spectroscopy (QEXAFS). The data are collected using a 4-channel, 12-bit multiplexed VME analog to digital converter and a VME angle encoder. The VME crate controller runs a real-time operating system. This system is capable of collecting 2 EXAFS-scans in 1 s with an energy stability of better than 1 eV. Additional improvements to increase the speed and the energy stability are under way.

Cam-driven monochromator for QEXAFS

International Nuclear Information System (INIS)

Caliebe, W.A.; So, I.; Lenhard, A.; Siddons, D.P.

2006-01-01

We have developed a cam-drive for quickly tuning the energy of an X-ray monochromator through an X-ray absorption edge for quick extended X-ray absorption spectroscopy (QEXAFS). The data are collected using a 4-channel, 12-bit multiplexed VME analog to digital converter and a VME angle encoder. The VME crate controller runs a real-time operating system. This system is capable of collecting 2 EXAFS-scans in 1 s with an energy stability of better than 1 eV. Additional improvements to increase the speed and the energy stability are under way

Consensus and differences in primary radiotherapy for localized and locally advanced prostate cancer in Switzerland. A survey on patterns of practice

Energy Technology Data Exchange (ETDEWEB)

Panje, Cedric M. [Kantonsspital St. Gallen, Department of Radiation Oncology, St. Gallen (Switzerland); Universitaetsspital Zuerich, Department of Radiation Oncology, Zurich (Switzerland); Dal Pra, Alan [Inselspital Bern, Department of Radiation Oncology, Bern (Switzerland); Zilli, Thomas [Hopitaux Universitaires de Geneve, Department of Radiation Oncology, Geneva (Switzerland); Zwahlen, Daniel R. [Kantonsspital Graubuenden, Department of Radiation Oncology, Chur (Switzerland); Papachristofilou, Alexandros [Universitaetsspital Basel, Department of Radiation Oncology, Basel (Switzerland); Herrera, Fernanda G. [Centre Hospitalier Universitaire Vaudois, Department of Radiation Oncology, Lausanne (Switzerland); Matzinger, Oscar [Hopital Riviera-Chablais, Department of Radiation Oncology, Vevey (Switzerland); Plasswilm, Ludwig; Putora, Paul Martin [Kantonsspital St. Gallen, Department of Radiation Oncology, St. Gallen (Switzerland)

2015-10-15

External beam radiotherapy (EBRT), with or without androgen deprivation therapy (ADT), is an established treatment option for nonmetastatic prostate cancer. Despite high-level evidence from several randomized trials, risk group stratification and treatment recommendations vary due to contradictory or inconclusive data, particularly with regard to EBRT dose prescription and ADT duration. Our aim was to investigate current patterns of practice in primary EBRT for prostate cancer in Switzerland. Treatment recommendations on EBRT and ADT for localized and locally advanced prostate cancer were collected from 23 Swiss radiation oncology centers. Written recommendations were converted into center-specific decision trees, and analyzed for consensus and differences using a dedicated software tool. Additionally, specific radiotherapy planning and delivery techniques from the participating centers were assessed. The most commonly prescribed radiation dose was 78 Gy (range 70-80 Gy) across all risk groups. ADT was recommended for intermediate-risk patients for 6 months in over 80 % of the centers, and for high-risk patients for 2 or 3 years in over 90 % of centers. For recommendations on combined EBRT and ADT treatment, consensus levels did not exceed 39 % in any clinical scenario. Arc-based intensity-modulated radiotherapy (IMRT) is implemented for routine prostate cancer radiotherapy by 96 % of the centers. Among Swiss radiation oncology centers, considerable ranges of radiotherapy dose and ADT duration are routinely offered for localized and locally advanced prostate cancer. In the vast majority of cases, doses and durations are within the range of those described in current evidence-based guidelines. (orig.) [German] Die Radiotherapie (RT) ist als Monotherapie oder in Kombination mit einer Androgendeprivationstherapie (ADT) eine etablierte Behandlungsoption fuer das lokalisierte und lokal fortgeschrittene Prostatakarzinom. Trotz der guten Evidenzlage durch zahlreiche

Is Marcus Gunn jaw winking a primitive reflex? Rat neuroanatomy

Directory of Open Access Journals (Sweden)

Hou-Cheng Liang

2018-03-01

Full Text Available AIM: To investigate a possible trigeminal proprioceptive-oculomotor neural pathway and explore possible synaptic connections between neurons in this pathway. Attempt to bring a new insight to mechanism of Marcus Gunn syndrome (MGS. METHODS: Anterograde and retrograde tract tracing was applied and combined with immunofluorescent stain in rats. After electrophysiological identifying mesencephalic trigeminal nucleus (Vme neurons, intracellular injection of tracer was performed to trace axon trajectory. RESULTS: Following injections of anterograde tracers into the Vme, labeled terminals were observed ipsilateral in oculomotor and trochlear nuclei (III/IV, as well as in their premotor neurons in interstitial nucleus of Cajal and Darkschewitsch nucleus (INC/DN. Combining with choline acetyltransferase (ChAT immunofluorescent stain, it showed that Vme projecting terminals contact upon ChAT positive III/IV motoneurons under confocal microscope. By retrograde labeling premotor neurons of the III, it showed that Vme neuronal terminals contact with retrogradely labeled pre-oculomotor neurons in the INC/DN. Axons of intracellularly labeled Vme neurons that respond to electric stimuli of the masseter nerve traveled into the ipsilateral III. CONCLUSION: There may exist a trigeminal proprioceptive- oculomotor system neural circuit in the rat, which is probably related to vertical-torsional eye movements. Possible association of this pathway with MGS etiology was discussed.

A systematic approach towards the identification and protection of vulnerable marine ecosystems

Science.gov (United States)

Ardron, Jeff A.; Clark, Malcolm R.; Penney, Andrew J.; Hourigan, Thomas F.; Rowden, Ashley A.; Dunstan, Piers K.; Watling, Les; Shank, Timothy M.; Tracey, Di M.; Dunn, Matthew R.; Parker, Steven J.

2014-01-01

The United Nations General Assembly in 2006 and 2009 adopted resolutions that call for the identification and protection of vulnerable marine ecosystems (VMEs) from significant adverse impacts of bottom fishing. While general criteria have been produced, there are no guidelines or protocols that elaborate on the process from initial identification through to the protection of VMEs. Here, based upon an expert review of existing practices, a 10-step framework is proposed: (1) Comparatively assess potential VME indicator taxa and habitats in a region; (2) determine VME thresholds; (3) consider areas already known for their ecological importance; (4) compile information on the distributions of likely VME taxa and habitats, as well as related environmental data; (5) develop predictive distribution models for VME indicator taxa and habitats; (6) compile known or likely fishing impacts; (7) produce a predicted VME naturalness distribution (areas of low cumulative impacts); (8) identify areas of higher value to user groups; (9) conduct management strategy evaluations to produce trade-off scenarios; (10) review and re-iterate, until spatial management scenarios are developed that fulfil international obligations and regional conservation and management objectives. To date, regional progress has been piecemeal and incremental. The proposed 10-step framework combines these various experiences into a systematic approach.

Brake force estimation for electromechanical vehicle brakes; Bremskraft-Rekonstruktion fuer elektromechanische Fahrzeugbremsen

Energy Technology Data Exchange (ETDEWEB)

Schwarz, R. [Continental Teves (Germany)

1999-06-01

Due to the increasing safety and comfort demands of the customer, the functionality of modern brake systems has grown continuously in the last years. However, implementation of the extended functionality in conventional brake hydraulics makes active electronic intervention necessary and therefore requires a lot of technical effort. In recent years the automotive supplier industry has started to develop brake systems which have electromechanical brake actuators generating the brake forces at the individual wheels. Electromechanically actuated wheel brakes need to be operated in a closed control loop. This paper introduces a new method to reconstruct the needed feedback value brake force from easy to measure signals. (orig.) [Deutsch] Aufgrund des gestiegenen Sicherheits- und Komfortbewusstseins der Fahrzeugkaeufer ist die Funktionsvielfalt moderner Bremssysteme in den letzten Jahren staendig gewachsen. Die Umsetzung der erweiterten Funktionalitaet mittels konventioneller Bremsenhydraulik ist jedoch durch den elektronischen, aktiven Eingriff sehr aufwendig. In den letzten Jahren hat daher die Automobilzulieferindustrie begonnen, Bremssysteme zu entwickeln, bei denen die Bremskraft an den einzelnen Raedern von elektromechanischen Bremsaktuatoren aufgebracht wird. Elektromechanisch betaetigte Radbremsen muessen im geschlossenen Regelkreis betrieben werden. Der vorliegende Beitrag, der im Rahmen einer Forschungskooperation zwischen Continental Teves und dem Institut fuer Automatisierungstechnik der TU Darmstadt entstand stellt ein Verfahren vor, mit dem die dafuer benoetigte Rueckfuehrungsgroesse `Bremskraft` aus einfach messbaren Signalen rekonstruiert werden kann. (orig.)

The procedure of statutory approval including EIA for the Warndt/Luisenthal colliery; Das bergrechtliche Zulassungsverfahren mit UVP fuer das Bergwerk Warndt/Luisenthal

Energy Technology Data Exchange (ETDEWEB)

Matthes, U.; Wenk, N. [Prognos AG, Basel (Switzerland)

2002-07-01

The amendment of the Federal Mining Act (BBergG 1990) provides, concerning special mining projects, a procedure of the official approval of a plan including public participation and Environmental Impact Assessment (EIA). To fit the claim of checking all possible environmental impacts of the projects, the BBergG demands on level of the framework operating plan, that the EIA has to be more extensive and detailed, compared to former (framework operating) plans of mining projects. This commentary sets out these new professional requirements by example of a mining project with high impact on housing estate (in that on humans, cultural goods and real assets). The way, how the planning procedure was handled and the EIA, focussed on social indicators, has been carried out, contributed to a de-emotionalized dialog with the affected people. By this means solutions were found to reduce negative mining impacts. (orig.) [German] Seit der Novelle des Bundesberggesetzes (BBergG) im Jahre 1990 ist fuer bestimmte bergbauliche Vorhaben ein Planfeststellungsverfahren mit Oeffentlichkeitsbeteiligung und Umweltvetraeglichkeitspruefung (UVP) vorgeschrieben. Die Regelungen des BBergG verlangen bei der UVP wegen des Anspruchs, alle moeglichen Umwelteinwirkungen des Vorhabens bereits auf der Ebene des Rahmenbetriebsplanes einer umfassenden und abschliessenden Betrachtung zu unterziehen, eine gegenueber Rahmenbetriebsplaenen herkoemmlicher Art betraechtliche Untersuchungs- und Prueftiefe. Am Beispiel eines beantragten Abbauvorhabens, das grossflaechig besiedeltes Gebiet beruehrt, wird die Vorgehensweise dargestellt. Besonderes Schwergewicht lag, dem Vorhaben entsprechend, auf den bergbaulichen Auswirkungen auf die UVP-Schutzgueter 'Mensch' sowie 'Kultur- und sonstige Sachgueter'. Die Verfahrensberatung sowie die strukturierte und sachgerechte Analyse und Aufbereitung der Umweltwirkungen haben dazu beigetragen, den Dialog mit den Betroffenen zu versachlichen und gemeinsam

Optimisation of the energy potential of low-CO2 gas turbines by using large monocrystal turbine blades. Final report; Optimierung des Energiepotentials fuer CO{sub 2}-arme Gasturbinen durch grosse Einkristall-Turbinenschaufeln. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Grossmann, J.

2002-07-01

Apart from the experimental identification and assessment of process characteristics during industrial-scale application of the so-called liquid metal cooling (LPC) process, the project focused on the characterisation of monocrystalline, directionally solidified materials and components. This involved the construction and commissioning of appropriate production and test aggregates, i.e. the LMC casting system and a Laue orientation testing unit, as well as the modification of a vacuum heat treatment furnace to meet the specific requirement of glow annealing of monocrystalline, directionally solidified turbine blades. [German] Das Ziel des Forschungsvorhabens (Laufzeit: 01. Juli 1997 bis 31. Dezember 2001) 'Optimierung des Energiepotentials fuer CO{sub 2}-arme Gasturbinen durch grosse Einkristall-Turbinenschaufeln' lag neben der experimentellen Bestimmung und Bewertung von Verfahrens- und Prozesskennwerten bei der industriellen Umsetzung des sogenannten Liquid-Metal-Cooling-Verfahrens (LMC) in der Eigenschaftscharakterisierung von einkristallin-gerichtet erstarrten Proben und Bauteilen, die mittels dieser neuartigen Giesstechnologie dargestellt wurden. Grundvoraussetzung fuer die umfassende Bearbeitung der o.g. Arbeitsinhalte war die Konstruktion und Inbetriebnahme der notwendigen Fertigungs- und Pruefaggregate, d.h. der LMC-Giessanlage und einer Laue-Orientierungspruefeinrichtung bzw. der Abstimmung eines Vakuum-Waermebehandlungsofens auf die spezifischen Anforderungen der Loesungsgluehung einkristallin-gerichtet erstarrter Turbinenlaufschaufeln. (orig.)

Energy study 2007 for the German state of Sachsen-Anhalt. Published on behalf of the Minister of Economy and Labour of Sachsen-Anhalt; Energiestudie 2007 fuer das Land Sachsen-Anhalt. Untersuchung im Auftrag des Ministeriums fuer Wirtschaft und Arbeit des Landes Sachsen-Anhalt

Energy Technology Data Exchange (ETDEWEB)

Weber, A.

2007-06-15

The current energy concept of Sachsen-Anhalt dates back to 2004. Since then, boundary conditions have changed. International energy markets are characterized by growing demand and rising energy prices. This has influenced Germany as well. Further, sustainable power supply and global climate change have become relevant issues during the past few years. Against this background, Sachsen-Anhalt intends to modify its energy concept. The first step will be the provision of a current information and data base on all aspects of world, national and state energy supply and all relevant boundary conditions. The 'Energiestudie 2007' was prepared by Institut fuer Energetik und Umwelt gGmbH. The contents are based on current studies and investigations. The 'Energiestudie' will provide an information base which may be maintained and updated by actors of Sachsen-Anhalt. (orig.)

FPGA-based multichannel optical concentrator SIMCON 4.0 for TESLA cavities LLRF control system

Science.gov (United States)

Perkuszewski, Karol; Pozniak, Krzysztof T.; Jalmuzna, Wojciech; Koprek, Waldemar; Szewinski, Jaroslaw; Romaniuk, Ryszard S.; Simrock, Stefan

2006-10-01

The paper presents an idea, design and realization of a gigabit, optoelectronic synchronous massive data concentrator for the LLRF control system for FLASH and XFEL superconducting accelerators and lasers. The design bases on a central, large, programmable FPGA VirtexIIPro circuit by Xilinx and on eight commercial optoelectronic transceivers. There were implemented peripheral devices for embedded PowerPC block like: memory and Ethernet. The SIMCON 4.0 module was realized as a single, standard EURO-6HE board with VXI/VME-bus. Hardware implementation was described for the most important functional blocks. Construction solutions were presented.

FPGA based multichannel optical concentrator SIMCON 4.0 for TESLA cavities LLRF control system

International Nuclear Information System (INIS)

Perkuszewski, K.; Pozniak, K.T.; Jalmuzna, W.; Koprek, W.; Szewinski, J.; Romaniuk, R.S.

2006-01-01

The paper presents an idea, design and realization of a gigabit, optoelectronic synchronous massive data concentrator for the LLRF control system for FLASH and XFEL superconducting accelerators and lasers. The design bases on a central, large, programmable FPGA VirtexIIPro circuit by Xilinx and on eight commercial optoelectronic transceivers. There were implemented peripheral devices for embedded PowerPC block like: memory and Ethernet. The SIMCON 4.0 module was realized as a single, standard EURO-6HE board with VXI/VME-bus. Hardware implementation was described for the most important functional blocks. Construction solutions were presented. (orig.)