The North-South divide in snake bite envenomation in India

Directory of Open Access Journals (Sweden)

Vivek Chauhan

2016-01-01

Full Text Available Snake bite envenomations are common in rural areas and the incidence peaks during monsoons in India. Prominent venomous species have been traditionally labeled as the ′big four′ that includes Cobra, Krait, Russel′s viper and Saw scaled viper. Systematic attempts for identification and classification of prevalent snakes in various states of India are missing till now and there is no concrete data on this aspect. The published literature however shows that some species of snakes are more prevalent in a particular region than the other parts of India e.g. Saw scaled vipers in Rajasthan. We reviewed the published literature from various parts of India and found that there is a North-South divide in the snake bite profile from India. Neurotoxic envenomations are significantly higher in North India compared to South India where Hematotoxic envenomations are prevalent. Russel′s viper causes local necrosis, gangrene and compartment syndrome. These manifestations have never been reported in North Indian snake bite profile in the published literature. Early morning neuroparalysis caused by Krait is a common problem in North India leading to high mortality after snake bite. This review presents supporting evidence for the North-South divide and proposes a way forward in formulation and revision of guidelines for snake bite in India.

Antipredatory function of head shape for vipers and their mimics.

Directory of Open Access Journals (Sweden)

Janne K Valkonen

Full Text Available Most research into the adaptive significance of warning signals has focused on the colouration and patterns of prey animals. However, behaviour, odour and body shape can also have signal functions and thereby reduce predators' willingness to attack defended prey. European vipers all have a distinctive triangular head shape; and they are all venomous. Several non-venomous snakes, including the subfamily Natricinae, commonly flatten their heads (also known as head triangulation when disturbed. The adaptive significance of this potential behavioural mimicry has never been investigated.We experimentally tested if the triangular head shape typical of vipers offers protection against predation. We compared the predation pressure of free-ranging predators on artificial snakes with triangular-shaped heads against the pressure on replicas with narrow heads. Snakes of both head types had either zigzag patterned bodies, typical of European vipers, or plain (patternless bodies. Plain snakes with narrower Colubrid-like heads suffered significantly higher predation by raptors than snakes with triangular-shaped heads. Head shape did not, however, have an additive effect on survival in zigzag-patterned snakes, suggesting that species which differ from vipers in colouration and pattern would benefit most from behavioural mimicry. Our results demonstrate that the triangular head shape typical of vipers can act as a warning signal to predators. We suggest that head-shape mimicry may be a more common phenomenon among more diverse taxa than is currently recognised.

In vitro and in vivo delivery of siRNA via VIPER polymer system to lung cells.

Science.gov (United States)

Feldmann, Daniel P; Cheng, Yilong; Kandil, Rima; Xie, Yuran; Mohammadi, Mariam; Harz, Hartmann; Sharma, Akhil; Peeler, David J; Moszczynska, Anna; Leonhardt, Heinrich; Pun, Suzie H; Merkel, Olivia M

2018-04-28

The block copolymer VIPER (virus-inspired polymer for endosomal release) has been reported to be a promising novel delivery system of DNA plasmids both in vitro and in vivo. VIPER is comprised of a polycation segment for condensation of nucleic acids as well as a pH-sensitive segment that exposes the membrane lytic peptide melittin in acidic environments to facilitate endosomal escape. The objective of this study was to investigate VIPER/siRNA polyplex characteristics, and compare their in vitro and in vivo performance with commercially available transfection reagents and a control version of VIPER lacking melittin. VIPER/siRNA polyplexes were formulated and characterized at various charge ratios and shown to be efficiently internalized in cultured cells. Target mRNA knockdown was confirmed by both flow cytometry and qRT-PCR and the kinetics of knockdown was monitored by live cell spinning disk microscopy, revealing knockdown starting by 4 h post-delivery. Intratracheal instillation of VIPER particles formulated with sequence specific siRNA to the lung of mice resulted in a significantly more efficient knockdown of GAPDH compared to treatment with VIPER particles formulated with scrambled sequence siRNA. We also demonstrated using pH-sensitive labels that VIPER particles experience less acidic environments compared to control polyplexes. In summary, VIPER/siRNA polyplexes efficiently deliver siRNA in vivo resulting in robust gene silencing (>75% knockdown) within the lung. Copyright © 2018 Elsevier B.V. All rights reserved.

VIPER: a web application for rapid expert review of variant calls.

Science.gov (United States)

Wöste, Marius; Dugas, Martin

2018-01-15

With the rapid development in next-generation sequencing, cost and time requirements for genomic sequencing are decreasing, enabling applications in many areas such as cancer research. Many tools have been developed to analyze genomic variation ranging from single nucleotide variants to whole chromosomal aberrations. As sequencing throughput increases, the number of variants called by such tools also grows. Often employed manual inspection of such calls is thus becoming a time-consuming procedure. We developed the Variant InsPector and Expert Rating tool (VIPER) to speed up this process by integrating the Integrative Genomics Viewer into a web application. Analysts can then quickly iterate through variants, apply filters and make decisions based on the generated images and variant metadata. VIPER was successfully employed in analyses with manual inspection of more than 10,000 calls. VIPER is implemented in Java and Javascript and is freely available at https://github.com/MarWoes/viper. Marius.Woeste@uni-muenster.de. Supplementary data are available at Bioinformatics online. © The Author (2018). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

VizieR Online Data Catalog: VIMOS Public Extragalactic Survey (VIPERS) DR1 (Garilli+, 2014)

Science.gov (United States)

Garilli, B.; Guzzo, L.; Scodeggio, M.; Bolzonella, M.; Abbas, U.; Adami, C.; Arnouts, S.; Bel, J.; Bottini, D.; Branchini, E.; Cappi, A.; Coupon, J.; Cucciati, O.; Davidzon, I.; de Lucia, G.; de la Torre, S.; Franzetti, P.; Fritz, A.; Fumana, M.; Granett, B. R.; Ilbert, O.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fevre, O.; Maccagni, D.; Malek, K.; Marulli, F.; McCracken, H. J.; Paioro, L.; Polletta, M.; Pollo, A.; Schlagenhaufer, H.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zamorani, G.; Zanichelli, A.; Burden, A.; di Porto, C.; Marchetti, A.; Marinoni, C.; Mellier, Y.; Moscardini, L.; Nichol, R. C.; Peacock, J. A.; Percival, W. J.; Phleps, S.; Wolk, M.

2014-09-01

We present the first Public Data Release (PDR-1) of the VIMOS Public Extragalactic Survey (VIPERS). It comprises 57204 spectroscopic measurements together with all additional information necessary for optimal scientific exploitation of the data, in particular the associated photometric measurements and quantification of the photometric and survey completeness. VIPERS is an ESO Large Programme designed to build a spectroscopic sample of =~100000 galaxies with iABaccessing the data through the survey database (http://vipers.inaf.it) where all information can be queried interactively. (4 data files).

A mitochondrial DNA phylogeny of the endangered vipers of the Vipera ursinii complex

Czech Academy of Sciences Publication Activity Database

Gvoždík, Václav; Jandzik, D.; Cordos, B.; Řehák, I.; Kotlík, Petr

2012-01-01

Roč. 62, č. 3 (2012), s. 1019-1024 ISSN 1055-7903 R&D Projects: GA MŠk LC06073 Institutional research plan: CEZ:AV0Z50450515 Keywords : Conservation * Meadow viper * Phylogeny * Steppe viper * Systematics * Vipera ursinii complex Subject RIV: EH - Ecology, Behaviour Impact factor: 4.066, year: 2012

Snakebite poisoning in Spain.

Science.gov (United States)

Martín-Sierra, Cristina; Nogué-Xarau, Santiago; Pinillos Echeverría, Miguel Ángel; Rey Pecharromán, José Miguel

2018-01-01

Emergencies due to snakebites, although unusual in Spain, are potentially serious. Of the 13 species native to the Iberian peninsula, only 5 are poisonous: 2 belong to the Colubridae family and 3 to the Viperidae family. Bites from these venemous snakes can be life-threatening, but the venomous species can be easily identified by attending to certain physical traits. Signs denoting poisoning from vipers, and the appropriate treatment to follow, have changed in recent years.

Light Higgs from Scalar See-Saw in Technicolor

DEFF Research Database (Denmark)

Foadi, Roshan; Frandsen, Mads Toudal

2012-01-01

We consider a TeV scale see-saw mechanism leading to light scalar resonances in models with otherwise intrinsically heavy scalars. The mechanism can provide a 125 GeV technicolor Higgs in e.g. two-scale TC models......We consider a TeV scale see-saw mechanism leading to light scalar resonances in models with otherwise intrinsically heavy scalars. The mechanism can provide a 125 GeV technicolor Higgs in e.g. two-scale TC models...

Development of VIPER: a simulator for assessing vision performance of warfighters

Science.gov (United States)

Familoni, Jide; Thompson, Roger; Moyer, Steve; Mueller, Gregory; Williams, Tim; Nguyen, Hung-Quang; Espinola, Richard L.; Sia, Rose K.; Ryan, Denise S.; Rivers, Bruce A.

2016-05-01

Background: When evaluating vision, it is important to assess not just the ability to read letters on a vision chart, but also how well one sees in real life scenarios. As part of the Warfighter Refractive Eye Surgery Program (WRESP), visual outcomes are assessed before and after refractive surgery. A Warfighter's ability to read signs and detect and identify objects is crucial, not only when deployed in a military setting, but also in their civilian lives. Objective: VIPER, a VIsion PERformance simulator was envisioned as actual video-based simulated driving to test warfighters' functional vision under realistic conditions. Designed to use interactive video image controlled environments at daytime, dusk, night, and with thermal imaging vision, it simulates the experience of viewing and identifying road signs and other objects while driving. We hypothesize that VIPER will facilitate efficient and quantifiable assessment of changes in vision and measurement of functional military performance. Study Design: Video images were recorded on an isolated 1.1 mile stretch of road with separate target sets of six simulated road signs and six objects of military interest, separately. The video footage were integrated with customdesigned C++ based software that presented the simulated drive to an observer on a computer monitor at 10, 20 or 30 miles/hour. VIPER permits the observer to indicate when a target is seen and when it is identified. Distances at which the observer recognizes and identifies targets are automatically logged. Errors in recognition and identification are also recorded. This first report describes VIPER's development and a preliminary study to establish a baseline for its performance. In the study, nine soldiers viewed simulations at 10 miles/hour and 30 miles/hour, run in randomized order for each participant seated at 36 inches from the monitor. Relevance: Ultimately, patients are interested in how their vision will affect their ability to perform daily

Somatic pairing, endomitosis and chromosome aberrations in snakes (Viperidae and Colubridae

Directory of Open Access Journals (Sweden)

Beçak Maria Luiza

2003-01-01

Full Text Available The positioning of macrochromosomes of Bothrops jararaca and Bothrops insularis (Viperidae was studied in undistorted radial metaphases of uncultured cells (spermatogonia and oogonia not subjected to spindle inhibitors. Colchicinized metaphases from uncultured (spleen and intestine and cultured tissues (blood were also analyzed. We report two antagonic non-random chromosome arrangements in untreated premeiotic cells: the parallel configuration with homologue chromosomes associated side by side in the metaphase plate and the antiparallel configuration having homologue chromosomes with antipolar distribution in the metaphase ring. The antiparallel aspect also appeared in colchicinized cells. The spatial chromosome arrangement in both configurations is groupal size-dependent and maintained through meiosis. We also describe, in untreated gonia cells, endomitosis followed by reductional mitosis which restores the diploid number. In B. jararaca males we observed that some gonad regions present changes in the meiotic mechanism. In this case, endoreduplicated cells segregate the diplochromosomes to opposite poles forming directly endoreduplicated second metaphases of meiosis with the suppression of first meiosis. By a successive division, these cells form nuclei with one set of chromosomes. Chromosome doubling in oogonia is known in hybrid species and in parthenogenetic salamanders and lizards. This species also presented chromosome rearrangements leading to aneuploidies in mitosis and meiosis. It is suggested that somatic pairing, endomitosis, meiotic alterations, and chromosomal aberrations can be correlated processes. Similar aspects of nuclei configurations, endomitosis and reductional mitosis were found in other Viperidae and Colubridae species.

Lessons Learned from Pit Viper Integration into Hanford Tank Farm Reality

International Nuclear Information System (INIS)

Catalan, Michael A.; Bailey, Sharon A.; Alzheimer, James M.; Niebuhr, Daniel P.

2002-01-01

The Pit Viper is a tele-operated system intended to enhance worker safety while simultaneously improving the efficiency of pit operations at the Hanford Site. Commercial off-the-shelf (COTS) components were used in an attempt to increase system efficiency. During preparation for initial deployment, the Pit Viper team identified multiple areas where more advanced technology offers substantial improvement in system capabilities. The team also ensured that the system as is, was capable of fulfilling its mission. However, there are valid concerns of the reliability of the technology. Areas where improvement are desired include; operator feedback, manipulator dexterous envelope, and system reliability

Fulltext PDF

Indian Academy of Sciences (India)

Wild animals also utilised the accumulated water for drinking. The Thar ... collected up to 12 saw-scaled vipers Echis carinatus during a 15 km long .... weed species have invaded the desert through transport of soil and water ... On the other hand, the shrew .... will reveal whether the boa evolves new methods of procuring.

Microangiopathic Hemolytic Anemia Following Three Different Species of Hump-Nosed Pit Viper (Genus: Hypnale) Envenoming in Sri Lanka.

Science.gov (United States)

Namal Rathnayaka, Rathnayaka Mudiyanselage M K; Ranathunga, Anusha Nishanthi; Kularatne, Senanayake A M; Rajapakse, Jayanthe; Ranasinghe, Shirani; Jayathunga, Radha

2018-03-01

There are 3 species of hump-nosed pit vipers in Sri Lanka: Hypnale hypnale, Hypnale zara, and Hypnale nepa. The latter 2 are endemic to the country. Microangiopathic hemolytic anemia (MAHA) is a known complication of hump-nosed pit viper bites. It was previously documented as a complication of general viper bites and not species specific. We report a series of 3 patients who developed MAHA after being bitten by each species of hump-nosed pit viper. The first patient was bitten by H hypnale and developed a severe form of MAHA associated with acute kidney injury and thrombocytopenia falling into the category of thrombotic microangiopathy. The other 2 developed MAHA that resolved without any complications. Copyright © 2017 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

Recombinant snake venom prothrombin activators

OpenAIRE

L?vgren, Ann

2012-01-01

Three prothrombin activators; ecarin, which was originally isolated from the venom of the saw-scaled viper Echis carinatus, trocarin from the rough-scaled snake Tropidechis carinatus, and oscutarin from the Taipan snake Oxyuranus scutellatus, were expressed in mammalian cells with the purpose to obtain recombinant prothrombin activators that could be used to convert prothrombin to thrombin. We have previously reported that recombinant ecarin can efficiently generate thrombin without the need ...

Toxicity of venoms from vipers of Pelias group to crickets Gryllus assimilis and its relation to snake entomophagy.

Science.gov (United States)

Starkov, Vladislav G; Osipov, Alexey V; Utkin, Yuri N

2007-06-01

The existing data indicate that snake venom is most toxic towards the natural vertebrate preys. Several species of snake include arthropods in their food. However, there is no available data on the toxicity of venom from entomophagous snakes towards their prey. We have studied the toxicity of venom from vipers of Pelias group towards crickets Gryllus assimilis. The Pelias group includes several closely related viper species inhabiting mainly the South European part of Russia, and they differ in their feeding preferences. Snakes from the Vipera renardi, Vipera lotievi, Vipera kaznakovi, and Vipera orlovi species feed on wide range of animals including insects, whereas snakes from Vipera berus and Vipera nikolskii species do not include insects in their diet. We have found that the venom from vipers that include insects in their diet possesses greater toxicity towards crickets. The greatest toxicity was observed for the venom from V. lotievi, which displays a preference for insects in its diet. Therefore, based on our data, we suggest that the viper entomophagy is not a result of behavior plasticity, but is probably determined at a genetic level.

Arc saw development report

International Nuclear Information System (INIS)

Deichelbohrer, P.R.; Beitel, G.A.

1981-01-01

The arc saw is one of the key components of the Contaminated Equipment Volume Reduction (CEVR) Program. This report describes the progress of the arc saw from its inception to its current developmental status. History of the arc saw and early contributors are discussed. Particular features of the arc saw and their advantages for CEVR are detailed. Development of the arc saw including theory of operation, pertinent experimental results, plans for the large arc saw and advanced control systems are covered. Associated topics such as potential applications for the arc saw and other arc saw installations in the world is also touched upon

Snake Venom Metalloproteinases and Their Peptide Inhibitors from Myanmar Russell’s Viper Venom

Directory of Open Access Journals (Sweden)

Khin Than Yee

2016-12-01

Full Text Available Russell’s viper bites are potentially fatal from severe bleeding, renal failure and capillary leakage. Snake venom metalloproteinases (SVMPs are attributed to these effects. In addition to specific antivenom therapy, endogenous inhibitors from snakes are of interest in studies of new treatment modalities for neutralization of the effect of toxins. Two major snake venom metalloproteinases (SVMPs: RVV-X and Daborhagin were purified from Myanmar Russell’s viper venom using a new purification strategy. Using the Next Generation Sequencing (NGS approach to explore the Myanmar RV venom gland transcriptome, mRNAs of novel tripeptide SVMP inhibitors (SVMPIs were discovered. Two novel endogenous tripeptides, pERW and pEKW were identified and isolated from the crude venom. Both purified SVMPs showed caseinolytic activity. Additionally, RVV-X displayed specific proteolytic activity towards gelatin and Daborhagin showed potent fibrinogenolytic activity. These activities were inhibited by metal chelators. Notably, the synthetic peptide inhibitors, pERW and pEKW, completely inhibit the gelatinolytic and fibrinogenolytic activities of respective SVMPs at 5 mM concentration. These complete inhibitory effects suggest that these tripeptides deserve further study for development of a therapeutic candidate for Russell’s viper envenomation.

On a meeting between the Horn Viper and a Centipede in the Peloponnese, southern Greece  or the Biter, bit

DEFF Research Database (Denmark)

Tan, Kit; Kretzschmar, Horst

2009-01-01

Vipera ammodytes L., (the European Horn-Nosed Viper) is a small venomous snake occurring in southern L., (the European Horn-Nosed Viper) is a small venomous snake occurring in southern Europe. It was documented attacking Scolopendra cingulata Latreille (the venomous Mediterranean Banded Centipede...

Leptogenesis in unified theories with Type II see-saw

International Nuclear Information System (INIS)

Antusch, Stefan; King, Steve F.

2006-01-01

In some classes of flavour models based on unified theories with a type I see-saw mechanism, the prediction for the mass of the lightest right-handed neutrino is in conflict with the lower bound from the requirement of successful thermal leptogenesis. We investigate how lifting the absolute neutrino mass scale by adding a type II see-saw contribution proportional to the unit matrix can solve this problem. Generically, lifting the neutrino mass scale increases the prediction for the mass of the lightest right-handed neutrino while the decay asymmetry is enhanced and washout effects are reduced, relaxing the lower bound on the mass of the lightest right-handed neutrino from thermal leptogenesis. For instance in classes of unified theories where the lightest right-handed neutrino dominates the type I see-saw contribution, we find that thermal leptogenesis becomes possible if the neutrino mass scale is larger than about 0.15 eV, making this scenario testable by neutrinoless double beta decay experiments in the near future

Detection of venom after antivenom is not associated with persistent coagulopathy in a prospective cohort of Russell's viper (Daboia russelii envenomings.

Directory of Open Access Journals (Sweden)

Kalana Maduwage

2014-12-01

Full Text Available Venom recurrence or persistence in the circulation after antivenom treatment has been documented many times in viper envenoming. However, it has not been associated with clinical recurrence for many snakes, including Russell's viper (Daboia spp.. We compare the recovery of coagulopathy to the recurrence or persistence of venom in patients with Russell's viper envenoming.The study included patients with Russell's viper (D. russelii envenoming presenting over a 30 month period who had Russell's viper venom detected by enzyme immunoassay. Demographics, information on the snake bite, and clinical effects were collected for all patients. All patients had serum collected for venom specific enzyme immunoassay and citrate plasma to measure fibrinogen levels and prothrombin time (international normalised ratio; INR. Patients with venom recurrence/persistence were compared to those with no detectable recurrence of venom. There were 55 patients with confirmed Russell's viper envenoming and coagulopathy with low fibrinogen concentrations: 31 with venom recurrence/persistence, and 24 with no venom detected post-antivenom. Fibrinogen concentrations increased and INR decreased after antivenom in both the recurrence and non-recurrence patients. Clinical features, laboratory parameters, antivenom dose and length of hospital were similar for both groups. Pre-antivenom venom concentrations were higher in patients with venom recurrence/persistence with a median venom concentration of 385 ng/mL (16-1521 ng/mL compared to 128 ng/mL (14-1492 ng/mL; p = 0.008.Recurrence of Russell's viper venom was not associated with a recurrence of coagulopathy and length of hospital stay. Further work is required to determine if the detection of venom recurrence is due to the venom specific enzyme immunoassay detecting both venom-antivenom complexes as well as free venom.

Serine Protease Variants Encoded by Echis ocellatus Venom Gland cDNA: Cloning and Sequencing Analysis

Directory of Open Access Journals (Sweden)

S. S. Hasson

2010-01-01

Full Text Available Envenoming by Echis saw-scaled viper is the leading cause of death and morbidity in Africa due to snake bite. Despite its medical importance, there have been few investigations into the toxin composition of the venom of this viper. Here, we report the cloning of cDNA sequences encoding four groups or isoforms of the haemostasis-disruptive Serine protease proteins (SPs from the venom glands of Echis ocellatus. All these SP sequences encoded the cysteine residues scaffold that form the 6-disulphide bonds responsible for the characteristic tertiary structure of venom serine proteases. All the Echis ocellatus EoSP groups showed varying degrees of sequence similarity to published viper venom SPs. However, these groups also showed marked intercluster sequence conservation across them which were significantly different from that of previously published viper SPs. Because viper venom SPs exhibit a high degree of sequence similarity and yet exert profoundly different effects on the mammalian haemostatic system, no attempt was made to assign functionality to the new Echis ocellatus EoSPs on the basis of sequence alone. The extraordinary level of interspecific and intergeneric sequence conservation exhibited by the Echis ocellatus EoSPs and analogous serine proteases from other viper species leads us to speculate that antibodies to representative molecules should neutralise (that we will exploit, by epidermal DNA immunization the biological function of this important group of venom toxins in vipers that are distributed throughout Africa, the Middle East, and the Indian subcontinent.

Venom Concentrations and Clotting Factor Levels in a Prospective Cohort of Russell's Viper Bites with Coagulopathy.

Directory of Open Access Journals (Sweden)

Geoffrey K Isbister

Full Text Available Russell's viper envenoming is a major problem in South Asia and causes venom induced consumption coagulopathy. This study aimed to investigate the kinetics and dynamics of venom and clotting function in Russell's viper envenoming.In a prospective cohort of 146 patients with Russell's viper envenoming, we measured venom concentrations, international normalised ratio [INR], prothrombin time (PT, activated partial thromboplastin time (aPTT, coagulation factors I, II, V, VII, VIII, IX and X, and von Willebrand factor antigen. The median age was 39 y (16-82 y and 111 were male. The median peak INR was 6.8 (interquartile range [IQR]: 3.7 to >13, associated with low fibrinogen [median,3 at 6 h post-antivenom but had reduced to <2, by 24 h. The aPTT had also returned to close to normal (<50 sec at 24 h. Factor VII, VIII and IX levels were unusually high pre-antivenom, median peak concentrations of 393%, 307% and 468% respectively. Pre-antivenom venom concentrations and the INR (r = 0.20, p = 0.02 and aPTT (r = 0.19, p = 0.03 were correlated (non-parametric Spearman analysis.Russell's viper coagulopathy results in prolonged aPTT, INR, low fibrinogen, factors V, VIII and X which recover over 48 h. Severity of clotting abnormalities was associated with venom concentrations.

Tank Riser Pit Decontamination System (Pit Viper) Return on Investment and Break-Even Analysis

International Nuclear Information System (INIS)

Young, Joan K.; Weimar, Mark R.; Balducci, Patrick J.; Fassbender, Linda L.; Hernandez, Melissa

2003-01-01

This study assessed the cost benefit of Pit Viper deployment for 80 tank farm pits between October 1, 2003 and September 30, 2012 under the technical baseline for applicable double-shell tank (DST) and single-shell tank (SST) projects. After this assessment had been completed, the U.S. Department of Energy (DOE) Richland Operations Office (RL) and Office of River Protection (ORP) published the Hanford Performance Management Plan (August 2003), which accelerated the schedule for SST retrieval. Then, DOE/CH2M HILL contract modification M064 (October 2002) and The Integrated Mission Acceleration Plan (March 2003) further accelerated SST retrieval and closure schedules. Twenty-six to 40 tanks must be retrieved by 2006. Thus the schedule for SST pit entries is accelerated and the number of SST pit entries is increased. This study estimates the return on investment (ROI) and the number of pits where Pit Viper deployment would break even or save money over current manual practices. The results of the analysis indicate a positive return on the federal investment for deployment of the Pit Viper provided it is used on a sufficient number of pits

Saw Palmetto

Science.gov (United States)

... R S T U V W X Y Z Saw Palmetto Share: On This Page Background How Much Do ... Foster This fact sheet provides basic information about saw palmetto—common names, usefulness and safety, and resources for ...

Effect of Trimeresurus albolabris (green pit viper) venom on mean ...

African Journals Online (AJOL)

An in vitro study was conducted by mixing small amounts of green pit viper venom with blood and observing changes. At a concentration of 10 mg crude venom, red blood cells (RBC) osmotic fragility slightly increased. RBC morphology changed to spherical shape which was compatible with what was observed in scanning ...

Comparative study of anticoagulant and procoagulant properties of 28 snake venoms from families Elapidae, Viperidae, and purified Russell's viper venom-factor X activator (RVV-X).

Science.gov (United States)

Suntravat, Montamas; Nuchprayoon, Issarang; Pérez, John C

2010-09-15

Snake venoms consist of numerous molecules with diverse biological functions used for capturing prey. Each component of venom has a specific target, and alters the biological function of its target. Once these molecules are identified, characterized, and cloned; they could have medical applications. The activated clotting time (ACT) and clot rate were used for screening procoagulant and anticoagulant properties of 28 snake venoms. Crude venoms from Daboia russellii siamensis, Bothrops asper, Bothrops moojeni, and one Crotalus oreganus helleri from Wrightwood, CA, had procoagulant activity. These venoms induced a significant shortening of the ACT and showed a significant increase in the clot rate when compared to the negative control. Factor X activator activity was also measured in 28 venoms, and D. r. siamensis venom was 5-6 times higher than those of B. asper, B. moojeni, and C. o. helleri from Wrightwood County. Russell's viper venom-factor X activator (RVV-X) was purified from D. r. siamensis venom, and then procoagulant activity was evaluated by the ACT and clot rate. Other venoms, Crotalus atrox and two Naja pallida, had anticoagulant activity. A significant increase in the ACT and a significant decrease in the clot rate were observed after the addition of these venoms; therefore, the venoms were considered to have anticoagulant activity. Venoms from the same species did not always have the same ACT and clot rate profiles, but the profiles were an excellent way to identify procoagulant and anticoagulant activities in snake venoms.

Rayleigh SAW-Assisted SH-SAW Immunosensor on X-Cut 148-Y LiTaO3.

Science.gov (United States)

Kogai, Takashi; Yatsuda, Hiromi; Kondoh, Jun

2017-09-01

In this paper, we describe a shear horizontal surface acoustic wave (SH-SAW) immunosensor that utilizes induce agitation by a Rayleigh SAW (R-SAW) on an X-cut 148-Y LiTaO 3 substrate. On this substrate, SH-SAWs and R-SAWs with different frequencies can be effectively generated at an interdigital transducer (IDT). First, to consider the power flow angles of SH-SAWs and R-SAWs on this substrate, the 360-MHz delay lines with six different tilt angles were designed and fabricated. From the experiments, an optimal power flow angle of 9° for the SH-SAW on this substrate is obtained. Second, in order to consider the immunoreactions of the SH-SAW immunosensors, a delay line with a tilt angle of 9° was designed and fabricated on this substrate. The delay line, which can generate two SAWs, namely, a 100-MHz SH-SAW and an 88.8-MHz R-SAW, has a propagation area covered with antigens of human serum albumin between transmitting and receiving IDTs. The immunoreactions caused by antigen-antibody binding events on the surface of the delay line were investigated on the basis of the velocity changes of the SH-SAWs for sensing with and without the assistance of an R-SAW. As a result, it was confirmed that the SH-SAW velocity changes due to antigen-antibody reactions can be markedly increased by the assistance of R-SAW agitation.

The VIMOS Public Extragalactic Redshift Survey (VIPERS). Full spectroscopic data and auxiliary information release (PDR-2)

Science.gov (United States)

Scodeggio, M.; Guzzo, L.; Garilli, B.; Granett, B. R.; Bolzonella, M.; de la Torre, S.; Abbas, U.; Adami, C.; Arnouts, S.; Bottini, D.; Cappi, A.; Coupon, J.; Cucciati, O.; Davidzon, I.; Franzetti, P.; Fritz, A.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marchetti, A.; Marulli, F.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Bel, J.; Branchini, E.; De Lucia, G.; Ilbert, O.; McCracken, H. J.; Moutard, T.; Peacock, J. A.; Zamorani, G.; Burden, A.; Fumana, M.; Jullo, E.; Marinoni, C.; Mellier, Y.; Moscardini, L.; Percival, W. J.

2018-01-01

We present the full public data release (PDR-2) of the VIMOS Public Extragalactic Redshift Survey (VIPERS), performed at the ESO VLT. We release redshifts, spectra, CFHTLS magnitudes and ancillary information (as masks and weights) for a complete sample of 86 775 galaxies (plus 4732 other objects, including stars and serendipitous galaxies); we also include their full photometrically-selected parent catalogue. The sample is magnitude limited to iAB ≤ 22.5, with an additional colour-colour pre-selection devised as to exclude galaxies at z automated pipeline; all redshift determinations were then visually validated and assigned a quality flag. Measurements with a quality flag ≥ 2 are shown to have a confidence level of 96% or larger and make up 88% of all measured galaxy redshifts (76 552 out of 86 775), constituting the VIPERS prime catalogue for statistical investigations. For this sample the rms redshift error, estimated using repeated measurements of about 3000 galaxies, is found to be σz = 0.00054(1 + z). All data are available at http://vipers.inaf.it and on the ESO Archive. Based on observations collected at the European Southern Observatory, Cerro Paranal, Chile, using the Very Large Telescope under programmes 182.A-0886 and partly 070.A-9007. Also based on observations obtained with MegaPrime/MegaCam, a joint project of CFHT and CEA/DAPNIA, at the Canada-France-Hawaii Telescope (CFHT), which is operated by the National Research Council (NRC) of Canada, the Institut National des Sciences de l'Univers of the Centre National de la Recherche Scientifique (CNRS) of France, and the University of Hawaii. This work is based in part on data products produced at TERAPIX and the Canadian Astronomy Data Centre as part of the Canada-France-Hawaii Telescope Legacy Survey, a collaborative project of NRC and CNRS. The VIPERS web site is http://www.vipers.inaf.it/

Population Pharmacokinetics of an Indian F(ab')2 Snake Antivenom in Patients with Russell's Viper (Daboia russelii) Bites

OpenAIRE

Isbister, Geoffrey K.; Maduwage, Kalana; Saiao, Ana; Buckley, Nicholas A.; Jayamanne, Shaluka F.; Seyed, Shahmy; Mohamed, Fahim; Chathuranga, Umesh; Alexandre, Mendes; Abeysinghe, Chandana; Karunathilake, Harinda; Gawarammana, Indika; Lalloo, David; Janaka de Silva, H.

2015-01-01

Background\\ud \\ud There is limited information on antivenom pharmacokinetics. This study aimed to investigate the pharmacokinetics of an Indian snake antivenom in humans with Russell’s viper bites.\\ud \\ud Methods/Principal Findings\\ud \\ud Patient data and serial blood samples were collected from patients with Russell’s viper (Daboia russelii) envenoming in Sri Lanka. All patients received Indian F(ab’)2 snake antivenom manufactured by VINS Bioproducts Ltd. Antivenom concentrations were measur...

Geographic distribution and apparent decline of Crotalus durissus terrificus (Laurenti, 1768; Serpentes, Viperidae) in Uruguay

OpenAIRE

Prigioni, Carlos M.; Borteiro, Claudio; Kolenc, Francisco; Colina, Marcelo; González, Enrique M.

2013-01-01

The rattlesnake Crotalus durissus terrificus (Laurenti, 1768; Serpentes, Viperidae) is a rare species in Uruguay, where it reaches the southern boundaries of its distribution. The most recent distribution map available for this species in Uruguay is based on a few specimens that were collected during the 1950s and 1960s. Herein, we make a comprehensive account of rattlesnake records in this country obtained from herpetological literature and other bibliographic sources, specimens accessioned ...

Resembling a viper: implications of mimicry for conservation of the endangered smooth snake.

Science.gov (United States)

Valkonen, Janne K; Mappes, Johanna

2014-12-01

The phenomenon of Batesian mimicry, where a palatable animal gains protection against predation by resembling an unpalatable model, has been a core interest of evolutionary biologists for 150 years. An extensive range of studies has focused on revealing mechanistic aspects of mimicry (shared education and generalization of predators) and the evolutionary dynamics of mimicry systems (co-operation vs. conflict) and revealed that protective mimicry is widespread and is important for individual fitness. However, according to our knowledge, there are no case studies where mimicry theories have been applied to conservation of mimetic species. Theoretically, mimicry affects, for example, frequency dependency of predator avoidance learning and human induced mortality. We examined the case of the protected, endangered, nonvenomous smooth snake (Coronella austriaca) that mimics the nonprotected venomous adder (Vipera berus), both of which occur in the Åland archipelago, Finland. To quantify the added predation risk on smooth snakes caused by the rarity of vipers, we calculated risk estimates from experimental data. Resemblance of vipers enhances survival of smooth snakes against bird predation because many predators avoid touching venomous vipers. Mimetic resemblance is however disadvantageous against human predators, who kill venomous vipers and accidentally kill endangered, protected smooth snakes. We found that the effective population size of the adders in Åland is very low relative to its smooth snake mimic (28.93 and 41.35, respectively).Because Batesian mimicry is advantageous for the mimic only if model species exist in sufficiently high numbers, it is likely that the conservation program for smooth snakes will fail if adders continue to be destroyed. Understanding the population consequences of mimetic species may be crucial to the success of endangered species conservation. We suggest that when a Batesian mimic requires protection, conservation planners should

Public health aspects of snakebite care in West Africa: perspectives from Nigeria

OpenAIRE

Habib, Abdulrazaq G

2013-01-01

Snakebite envenoming is a major public health problem among rural communities of the Nigerian savanna. The saw-scaled or carpet viper (Echis ocellatus) and, to a lesser extent, the African cobras (Naja spp.) and puff adders (Bitis arietans) have proved to be the most important cause of mortality and morbidity. The main clinical features of E. ocellatus envenoming are systemic hemorrhage, incoagulable blood, shock, local swelling, bleeding and, occasionally, necrosis. Bites may be complicated ...

Viper and cobra venom neutralization by beta-sitosterol and stigmasterol isolated from the root extract of Pluchea indica Less. (Asteraceae).

Science.gov (United States)

Gomes, A; Saha, Archita; Chatterjee, Ipshita; Chakravarty, A K

2007-09-01

We reported previously that the methanolic root extract of the Indian medicinal plant Pluchea indica Less. (Asteraceae) could neutralize viper venom-induced action [Alam, M.I., Auddy, B., Gomes, A., 1996. Viper venom neutralization by Indian medicinal plant (Hemidesmus indicus and P. indica) root extracts. Phytother. Res. 10, 58-61]. The present study reports the neutralization of viper and cobra venom by beta-sitosterol and stigmasterol isolated from the root extract of P. indica Less. (Asteraceae). The active fraction (containing the major compound beta-sitosterol and the minor compound stigmasterol) was isolated and purified by silica gel column chromatography and the structure was determined using spectroscopic analysis (EIMS, (1)H NMR, (13)C NMR). Anti-snake venom activity was studied in experimental animals. The active fraction was found to significantly neutralize viper venom-induced lethal, hemorrhagic, defibrinogenation, edema and PLA(2) activity. Cobra venom-induced lethality, cardiotoxicity, neurotoxicity, respiratory changes and PLA(2) activity were also antagonized by the active component. It potentiated commercial snake venom antiserum action against venom-induced lethality in male albino mice. The active fraction could antagonize venom-induced changes in lipid peroxidation and superoxide dismutase activity. This study suggests that beta-sitosterol and stigmasterol may play an important role, along with antiserum, in neutralizing snake venom-induced actions.

Neutralization of lethality and proteolytic activities of Malayan pit viper (Calloselasma rhodostoma) venom with North American Virginia opossum (Didelphis virginiana) serum.

Science.gov (United States)

Pornmanee, Piboon; Sánchez, Elda E; López, Gonzalo; Petsom, Amorn; Khow, Orawan; Pakmanee, Narumol; Chanhome, Lawan; Sangvanich, Polkit; Pérez, John C

2008-07-01

Malayan pit viper (Calloselasma rhodostoma) envenomation is a major health problem in South East Asia. During envenomation, venom components mainly affect the hemostatic system. The sera from the North American Virginia opossums (Didelphis virginiana) were able to neutralize the venom of the Malayan pit viper. These natural inhibitors could be explored as potential therapeutics against envenomations of a variety of venomous snake species in different geographical habitats.

On the issue of taxonomical status of steppe viper (Vipera renardi in Right-bank Ukraine

Directory of Open Access Journals (Sweden)

A. L. Baybuz

2011-07-01

Full Text Available Data on morphologic variability of the steppe viper in the Kirovograd region (Right-bank Ukraine are given firstly. Tentative estimation of the similaritylevel of the local population and the populations from the Left-bank Ukraine and the Crimea was carried out using methods of the multivariate statistics. Morphological data in line with the results of mitochondrial DNA analysis show that the population in the Kirovograd region belongs to widespread Eurasian species Vipera renardiand morphologically most close to the original populations of the lowland Crimea, Sivash and Forest-Steppe of the Left-bank Ukraine. This could indicate the complicated history of the Right-bank Ukraine colonization by the steppe viper and possible influence of environmental conditions on the vipers’ morphology

Saw palmetto-induced pancreatitis.

Science.gov (United States)

Jibrin, Ismaila; Erinle, Ayodele; Saidi, Abdulfattah; Aliyu, Zakari Y

2006-06-01

Saw palmetto is a frequently used botanical agent in benign prostatic enlargement (BPH). Although it has been reported to cause cholestatic hepatitis and many medical conditions, Saw palmetto has not been implicated in acute pancreatitis. We report a case of a probable Saw palmetto induced acute hepatitis and pancreatitis. A 55-year-old reformed alcoholic, sober for greater than 15 years, presented with severe non-radiating epigastric pain associated with nausea and vomiting. His only significant comorbidity is BPH for which he intermittently took Saw palmetto for about four years. Physical examination revealed normal vital signs, tender epigastrium without guarding or rebound tenderness. Cullen and Gray Turner signs were negative. Complete blood count and basic metabolic profile were normal. Additional laboratory values include a serum amylase: 2,152 mmol/L, lipase: 39,346 mmol/L, serum triglyceride: 38 mmol/L, AST: 1265, ALT: 1232 and alkaline phosphatase was 185. Abdominal ultrasound and magnetic resonance cholangiography revealed sludge without stones. A hepatic indole diacetic acid scan was negative. Patient responded clinically and biochemically to withdrawal of Saw palmetto. Two similar episodes of improvements followed by recurrence were noted with discontinuations and reinstitution of Saw Palmetto. Simultaneous and sustained response of hepatitis and pancreatitis to Saw palmetto abstinence with reoccurrence on reinstitution strongly favors drug effect. "Natural" medicinal preparations are therefore not necessarily safe and the importance of detailed medication history (including "supplements") cannot be over emphasized.

Saw palmetto for the treatment of men with lower urinary tract symptoms.

Science.gov (United States)

Gerber, G S

2000-05-01

A comprehensive review of the literature on the use of saw palmetto in men with lower urinary tract symptoms is provided. A literature search of studies that have assessed the mechanism of action and clinical results of saw palmetto in men with benign prostatic hyperplasia was performed. A variety of potential mechanisms of action of saw palmetto have been demonstrated through in vitro studies, including 5-alpha reductase inhibition, adrenergic receptor antagonism and intraprostatic androgen receptor blockade. Clinical evidence of the relevance of these effects is largely unavailable. The use of saw palmetto in men with benign prostatic hyperplasia is safe with no recognized adverse effects. No effect on serum prostate specific antigen has been noted. Placebo controlled trials and meta-analyses have suggested that saw palmetto leads to subjective and objective improvement in men with lower urinary tract symptoms. However, most studies are significantly limited by methodological flaws, small patient numbers and brief treatment intervals. Evidence suggests that saw palmetto may have a significant effect on urinary flow rates and symptom scores compared to placebo in men with lower urinary tract symptoms. However, large scale, placebo controlled trials are needed to assess the efficacy of saw palmetto.

Asp Viper (Vipera aspis) envenomation: experience of the Marseille Poison Centre from 1996 to 2008.

Science.gov (United States)

de Haro, Luc; Glaizal, Mathieu; Tichadou, Lucia; Blanc-Brisset, Ingrid; Hayek-Lanthois, Maryvonne

2009-12-01

A retrospective case review study of viper envenomations collected by the Marseille's Poison Centre between 1996 and 2008 was performed. 174 cases were studied (52 grade 1 = G1, 90 G2 and 32 G3). G1 patients received symptomatic treatments (average hospital stay 0.96 day). One hundred and six (106) of the G2/G3 patients were treated with the antivenom Viperfav* (2.1+/-0.9 days in hospital), while 15 of them received symptomatic treatments only (plus one immediate death) (8.1+/-4 days in hospital, 2 of them died). The hospital stay was significantly reduced in the antivenom treated group (p < 0.001), and none of the 106 antivenom treated patients had immediate (anaphylaxis) or delayed (serum sickness) allergic reactions. Viperfav* antivenom was safe and effective for treating asp viper venom-induced toxicity.

SAW

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — SPC Aviation Watch (SAW) Messages are issued to provide an area threat alert for the aviation meteorology community to forecast organized severe thunderstorms that...

[The morphological features of skin wounds inflicted by joinery hand saws designed for different types of sawing].

Science.gov (United States)

Sarkisian, B A; Azarov, P A

2014-01-01

The objective of the present work was to study the morphological features of skin wounds inflicted by joinery hand saws designed for longitudinal, transverse, and mixed sawing. A total of 60 injuries to the thigh skin inflicted by the recurring and reciprocating saw movements were simulated. The hand saws had 5 mm high "sharp" and "blunt"-tipped teeth. The analysis of the morphological features of the wounds revealed differences in their length and depth, shape of edge cuts and defects, and the relief of the walls depending on the sawtooth sharpness and the mode of sawing. It is concluded that morphological features of the wounds may be used to determine the type of the saw, the sharpness of its teeth, the direction and frequency of its movements.

In vivo evaluation of homeostatic effects of Echis carinatus snake venom in Iran

Science.gov (United States)

2013-01-01

Background The venom of the family Viperidae, including the saw-scaled viper, is rich in serine proteinases and metalloproteinases, which affect the nervous system, complementary system, blood coagulation, platelet aggregation and blood pressure. One of the most prominent effects of the snake venom of Echis carinatus (Ec) is its coagulation activity, used for killing prey. Materials and methods Subfractions F1A and F1B were isolated from Ec crude venom by a combination of gel chromatography (Sephadex G-75) and ion exchange chromatography on a DEAE-Sepharose (DE-52). These subfractions were then intravenously (IV) injected into NIH male mice. Blood samples were taken before and after the administration of these subfractions. Times for prothrombin, partial thromboplastin and fibrinogen were recorded. Results and conclusions Comparison of the prothrombin time before and after F1A and F1B administrations showed that time for blood coagulation after injection is shorter than that of normal blood coagulation and also reduced coagulation time after Ec crude venom injection. This difference in coagulation time shows the intense coagulation activity of these subfractions that significantly increase the coagulation cascade rate and Causes to quick blood coagulation. The LD50 of the Ec crude venom was also determined to be 11.1 μg/mouse. Different crude venom doses were prepared with physiological serum and injected into four mice. Comparison of the prothrombin times after injection of subfractions F1A and F1B showed that the rate of mouse blood coagulation increases considerably. Comparing the partial thromboplastin times after injecting these subfractions with this normal test time showed that the activity rate of intrinsic blood coagulation system rose sharply in mice. Finally, by comparing the fibrinogen time after subfraction injections and normal test time, we can infer intense activation of coagulation cascade and fibrin production. PMID:23848979

In vivo evaluation of homeostatic effects of Echis carinatus snake venom in Iran

Directory of Open Access Journals (Sweden)

Salmanizadeh Hossein

2013-02-01

Full Text Available Abstract Background The venom of the family Viperidae, including the saw-scaled viper, is rich in serine proteinases and metalloproteinases, which affect the nervous system, complementary system, blood coagulation, platelet aggregation and blood pressure. One of the most prominent effects of the snake venom of Echis carinatus (Ec is its coagulation activity, used for killing prey. Materials and methods Subfractions F1A and F1B were isolated from Ec crude venom by a combination of gel chromatography (Sephadex G-75 and ion exchange chromatography on a DEAE-Sepharose (DE-52. These subfractions were then intravenously (IV injected into NIH male mice. Blood samples were taken before and after the administration of these subfractions. Times for prothrombin, partial thromboplastin and fibrinogen were recorded. Results and conclusions Comparison of the prothrombin time before and after F1A and F1B administrations showed that time for blood coagulation after injection is shorter than that of normal blood coagulation and also reduced coagulation time after Ec crude venom injection. This difference in coagulation time shows the intense coagulation activity of these subfractions that significantly increase the coagulation cascade rate and Causes to quick blood coagulation. The LD50 of the Ec crude venom was also determined to be 11.1 μg/mouse. Different crude venom doses were prepared with physiological serum and injected into four mice. Comparison of the prothrombin times after injection of subfractions F1A and F1B showed that the rate of mouse blood coagulation increases considerably. Comparing the partial thromboplastin times after injecting these subfractions with this normal test time showed that the activity rate of intrinsic blood coagulation system rose sharply in mice. Finally, by comparing the fibrinogen time after subfraction injections and normal test time, we can infer intense activation of coagulation cascade and fibrin production.

Saw palmetto for prostate disorders.

Science.gov (United States)

Gordon, Andrea E; Shaughnessy, Allen F

2003-03-15

Saw palmetto is an herbal product used in the treatment of symptoms related to benign prostatic hyperplasia. The active component is found in the fruit of the American dwarf palm tree. Studies have demonstrated the effectiveness of saw palmetto in reducing symptoms associated with benign prostatic hyperplasia. Saw palmetto appears to have efficacy similar to that of medications like finasteride, but it is better tolerated and less expensive. There are no known drug interactions with saw palmetto, and reported side effects are minor and rare. No data on its long-term usage are available. The herbal product also has been used to treat chronic prostatitis, but currently there is no evidence of its efficacy.

Viper's bugloss (Echium spp. honey typing and establishing the pollen threshold for monofloral honey.

Directory of Open Access Journals (Sweden)

Tomás Martín Arroyo

Full Text Available Honey samples (n = 126 from Castilla-La Mancha (Central Spain were characterized based on their physicochemical properties and a melissopalynological analysis. The latter showed that Echium pollen type was the dominant palynomorph in most samples, representing at least 30% of the pollen in each sample. As anticipated, a relationship was observed between the proportion of this pollen and the properties of the honey. One goal of this study was to set a threshold that defines the percentage of pollen necessary for Viper's bugloss honey to be considered monofloral or multifloral. This is a mandatory requirement in light of the publication of the European Directive 2014/63/EU establishing the regulations governing the labelling and control of honey to eradicate fraud (BOE n° 147, June 2015. By analyzing how the proportions of Echium pollen type affected the physicochemical and sensory parameters of the honey, the honeys analyzed could be segregated into multifloral and monofloral honeys. The data indicates that the proportion of pollen necessary to discriminate monofloral Viper's bugloss honey lies at 70%.

Saw palmetto and lower urinary tract symptoms: what is the latest evidence?

Science.gov (United States)

Avins, Andrew L; Bent, Stephen

2006-07-01

The use of dietary supplements for treating a wide range of health conditions has grown rapidly in the United States. In the field of men's health, the most common dietary supplement used is an extract of the berry of the saw palmetto plant, with which men commonly self-medicate in order to treat lower urinary tract symptoms. Throughout the past two decades, substantial literature has emerged examining the biologic and clinical effects of saw palmetto extracts. Several lines of evidence suggest that saw palmetto may exert physiologic effects consistent with a beneficial clinical effect on the mechanisms of benign prostatic hyperplasia. Although most clinical studies tend to suggest a modest efficacy benefit of saw palmetto, more recent studies are less consistent and the precise clinical value of saw palmetto for treating lower urinary tract symptoms remains undefined. Overall, there appear to be few safety concerns with short-term use of this herbal medicine, although large-scale and longer-term safety studies have not been performed. Higher-quality studies are currently underway to better define the potential benefits and risks of plant-based extracts for treating symptoms related to benign prostatic hyperplasia.

Pit Viper strikes at the Hanford site. Pit maintenance using robotics at the Hanford Tank Farms

International Nuclear Information System (INIS)

Roeder-Smith, Lynne

2002-01-01

The Pit Viper--a remote operations waste retrieval system--was developed to replace manual operations in the valve pits of waste storage tanks at the Hanford Site. The system consists of a typical industrial backhoe fitted with a robotic manipulator arm and is operated remotely from a control trailer located outside of the tank farm. Cameras mounted to the arm and within the containment tent allow the operator to view the entire pit area and operate the system using a joystick. The arm's gripper can grasp a variety of tools that allow personnel to perform cleaning, debris removal, and concrete repair tasks--a more efficient and less dose-intensive process than the previous 'long-pole' method. The project team overcame a variety of obstacles during development and testing of the Pit Viper system, and deployment occurred in Hanford Tank C-104 in December 2001

Bites by the white-lipped pit viper (Trimeresurus albolabris) and other species in Hong Kong. A survey of 4 years' experience at the Prince of Wales Hospital.

Science.gov (United States)

Cockram, C S; Chan, J C; Chow, K Y

1990-04-01

The case records of 242 snake bite victims admitted to the Prince of Wales Hospital in Hong Kong between September 1984 and October 1988 were studied retrospectively. When the snake was identified, the White-lipped pit viper (Trimeresurus albolabris) was by far the commonest species involved. In addition to local oedema and inflammation, evidence of a significant blood clotting disturbance was present in at least 10% of cases, defibrination and thrombocytopenia being the commonest findings. Since such abnormality was not always sought the true figure is likely to be higher. Three fatalities occurred, one of which was secondary to a probable White-lipped pit viper bite, one to a bite by Chinese cobra and one to a bite by Russell's viper.

Prototype arc saw design and cutting trials

International Nuclear Information System (INIS)

Allison, G.S.

1980-09-01

A program was initiated to develop the arc saw as a tool capable of removing the end fittings from spent nuclear fuel bundles. A special arc saw for this purpose was designed, installed at the Pacific Northwest Laboratory and satisfactorily operated to remove end fittings from simulated, nonradioactive fuel bundles. The design of the arc saw included consideration of the cutting environment, power supply size, control equipment, and work piece size. Several simulated fuel bundles were cut to demonstrate that the arc saw met design specifications. Although the arc saw development program was curtailed before significant performance data could be collected, tests indicate that the arc saw is a good means of cropping spent fuel bundles and is well suited to remote operation and maintenance

Effect of Spindle Parameters of Woodworking Band Saw on the AE Value of Crack Band Saw Blade in Compound Material Processing (1)

Science.gov (United States)

Gao, Jin-gui; Jiang, Zhao-fang; Luo, Lai-peng

2017-04-01

Taking the MJ3210A motion band saw as the research object, the AE value of the band saw blade vibration was obtained by analyzing the VIBSYS vibration signal acquisition and analysis software system in Beijing, and the change of the AE value of the band saw and the crack was found out. The experimental results show that in the MJ3210A sports car sawing machine, the band saw blade with width of 130 mm is used, and the AE value of the cracked band saw blade is well in the high band saw blade AE value. Under the best working condition of the band saw, the band saw blade AE If the value exceeds 104.7 dB (A) above, it means that the band saw blade has at least one crack length greater than 1.38 mm for the crack defect and the need to replace the band saw blade in time. Different species with saw blade of the AE value is different, white pine wood minimum, the largest oak wood; according to a variety of wood processing AE instrument value to determine the band saw blade crack to the situation; so as to fully rational use of band saw blade, The failure and the degree of development to find a new method.

Preliminarily measurement and analysis of sawing forces in fresh cadaver mandible using reciprocating saw for reality-based haptic feedback.

Science.gov (United States)

Yua, Dedong; Zhengb, Xiaohu; Chenc, Ming; Shend, Steve G F

2012-05-01

The aim of the study was to preliminarily measure and analyze the cutting forces in fresh Chinese cadaver mandible using a clinically widely used reciprocating saw for reality-based haptic feedback. Eight mandibles were taken from fresh Chinese cadavers, 4 females and 4 males, aged between 59 and 95 years. A set of sawing experiments, using a surgery Stryker micro-reciprocating saw and Kistler piezoelectric dynamometer, was carried out by a CNC machining center. Under different vibration frequencies of saw and feeding rates measured from orthognathic surgery, sawing forces were recorded by a signal acquisition system. Remarkably different sawing forces were measured from different cadavers. Feed and vibration frequency of the reciprocating saw could determine the cutting forces only on 1 body. To reduce the impact of bone thickness changes on the cutting force measurements, all the cutting force data should be converted to the force of unit cutting length. The vibration frequency of haptic feedback system is determined by main cutting forces. Fast Fourier transform method can be used to calculate the frequency of this system. To simulate surgery in higher fidelity, all the sawing forces from the experiment should be amended by experienced surgeons before use in virtual reality surgery simulator. Sawing force signals of different ages for force feedback were measured successfully, and more factors related to the bone mechanical properties, such as bone density, should be concerned in the future.

Evolutionary trajectories of snake genes and genomes revealed by comparative analyses of five-pacer viper

Science.gov (United States)

Yin, Wei; Wang, Zong-ji; Li, Qi-ye; Lian, Jin-ming; Zhou, Yang; Lu, Bing-zheng; Jin, Li-jun; Qiu, Peng-xin; Zhang, Pei; Zhu, Wen-bo; Wen, Bo; Huang, Yi-jun; Lin, Zhi-long; Qiu, Bi-tao; Su, Xing-wen; Yang, Huan-ming; Zhang, Guo-jie; Yan, Guang-mei; Zhou, Qi

2016-01-01

Snakes have numerous features distinctive from other tetrapods and a rich history of genome evolution that is still obscure. Here, we report the high-quality genome of the five-pacer viper, Deinagkistrodon acutus, and comparative analyses with other representative snake and lizard genomes. We map the evolutionary trajectories of transposable elements (TEs), developmental genes and sex chromosomes onto the snake phylogeny. TEs exhibit dynamic lineage-specific expansion, and many viper TEs show brain-specific gene expression along with their nearby genes. We detect signatures of adaptive evolution in olfactory, venom and thermal-sensing genes and also functional degeneration of genes associated with vision and hearing. Lineage-specific relaxation of functional constraints on respective Hox and Tbx limb-patterning genes supports fossil evidence for a successive loss of forelimbs then hindlimbs during snake evolution. Finally, we infer that the ZW sex chromosome pair had undergone at least three recombination suppression events in the ancestor of advanced snakes. These results altogether forge a framework for our deep understanding into snakes' history of molecular evolution. PMID:27708285

SUSY see-saw and NMSO(10)GUT inflation after BICEP2

International Nuclear Information System (INIS)

Garg, Ila

2016-01-01

Supersymmetric see-saw slow roll inflection point inflation occurs along a MSSM D-flat direction associated with gauge invariant combination of Higgs, s lepton and right-handed s neutrino at a scale set by the right-handed neutrino mass M vc ∼ 10 6 -10 13 GeV. The tensor to scalar perturbation ratio r ∼ 10 -3 can be achieved in this scenario. However, this scenario faced difficulty in being embedded in the realistic new minimal supersymmetric SO(10) grand unified theory (NMSO(10)GUT). The recent discovery of B-mode polarization by BICEP2, changes the prospects of NMSO(10) GUT inflation. Inflection point models become strongly disfavoured, as the trilinear coupling of SUSY see-saw inflation potential gets suppressed relative to the mass parameter favoured by BICEP2. Large values of r ≈ 0.2 can be achieved with super-Planck scale inflaton values and mass scales of inflaton ≥10 13 GeV. In NMSO(10)GUT, this can be made possible with an admixture of heavy Higgs doublet fields, i.e., other than MSSM Higgs field, which are present and have masses of order GUT scale. (author)

Venomics of New World pit vipers: genus-wide comparisons of venom proteomes across Agkistrodon.

Science.gov (United States)

Lomonte, Bruno; Tsai, Wan-Chih; Ureña-Diaz, Juan Manuel; Sanz, Libia; Mora-Obando, Diana; Sánchez, Elda E; Fry, Bryan G; Gutiérrez, José María; Gibbs, H Lisle; Sovic, Michael G; Calvete, Juan J

2014-01-16

We report a genus-wide comparison of venom proteome variation across New World pit vipers in the genus Agkistrodon. Despite the wide variety of habitats occupied by this genus and that all its taxa feed on diverse species of vertebrates and invertebrate prey, the venom proteomes of copperheads, cottonmouths, and cantils are remarkably similar, both in the type and relative abundance of their different toxin families. The venoms from all the eleven species and subspecies sampled showed relatively similar proteolytic and PLA2 activities. In contrast, quantitative differences were observed in hemorrhagic and myotoxic activities in mice. The highest myotoxic activity was observed with the venoms of A. b. bilineatus, followed by A. p. piscivorus, whereas the venoms of A. c. contortrix and A. p. leucostoma induced the lowest myotoxic activity. The venoms of Agkistrodon bilineatus subspecies showed the highest hemorrhagic activity and A. c. contortrix the lowest. Compositional and toxicological analyses agree with clinical observations of envenomations by Agkistrodon in the USA and Central America. A comparative analysis of Agkistrodon shows that venom divergence tracks phylogeny of this genus to a greater extent than in Sistrurus rattlesnakes, suggesting that the distinct natural histories of Agkistrodon and Sistrurus clades may have played a key role in molding the patterns of evolution of their venom protein genes. A deep understanding of the structural and functional profiles of venoms and of the principles governing the evolution of venomous systems is a goal of venomics. Isolated proteomics analyses have been conducted on venoms from many species of vipers and pit vipers. However, making sense of these large inventories of data requires the integration of this information across multiple species to identify evolutionary and ecological trends. Our genus-wide venomics study provides a comprehensive overview of the toxic arsenal across Agkistrodon and a ground for

Venomics of New World pit vipers: Genus-wide comparisons of venom proteomes across Agkistrodon

Science.gov (United States)

Lomonte, Bruno; Tsai, Wan-Chih; Ureña-Diaz, Juan Manuel; Sanz, Libia; Mora-Obando, Diana; Sánchez, Elda E.; Fry, Bryan G.; Gutiérrez, José María; Gibbs, H. Lisle; Sovic, Michael G.; Calvete, Juan J.

2015-01-01

We report a genus-wide comparison of venom proteome variation across New World pit vipers in the genus Agkistrodon. Despite the wide variety of habitats occupied by this genus and that all its taxa feed on diverse species of vertebrates and invertebrate prey, the venom proteomes of copperheads, cottonmouths, and cantils are remarkably similar, both in the type and relative abundance of their different toxin families. The venoms from all the eleven species and subspecies sampled showed relatively similar proteolytic and PLA2 activities. In contrast, quantitative differences were observed in hemorrhagic and myotoxic activities in mice. The highest myotoxic activity was observed with the venoms of A. b. bilineatus, followed by A. p. piscivorus, whereas the venoms of A. c. contortrix and A. p. leucostoma induced the lowest myotoxic activity. The venoms of Agkistrodon bilineatus subspecies showed the highest hemorrhagic activity and A. c. contortrix the lowest. Compositional and toxicological analyses agree with clinical observations of envenomations by Agkistrodon in the USA and Central America. A comparative analysis of Agkistrodon shows that venom divergence tracks phylogeny of this genus to a greater extent than in Sistrurus rattlesnakes, suggesting that the distinct natural histories of Agkistrodon and Sistrurus clades may have played a key role in molding the patterns of evolution of their venom protein genes. Biological significance A deep understanding of the structural and functional profiles of venoms and of the principles governing the evolution of venomous systems is a goal of venomics. Isolated proteomics analyses have been conducted on venoms from many species of vipers and pit vipers. However, making sense of these large inventories of data requires the integration of this information across multiple species to identify evolutionary and ecological trends. Our genus-wide venomics study provides a comprehensive overview of the toxic arsenal across

PROVENANCE SNAKES OF GENUS Bothrops AND Crotalus (VIPERIDAE) CATALOGED IN SERPENTARIUM ZOO UNIVERSITY OF CAXIAS DO SUL (UCS)

OpenAIRE

Ezequiel Capeletti; Michel Mendes; Diezza Biondo; Marcia Maria Dosciatti de Oliveira

2016-01-01

Snakes are reptiles that have large environmental adaptations, which favored it's distribution among the various ecosystems. In Brazil, there are found 392 species of snakes, while in Rio Grande do Sul (RS), this research field, 79 species have been described, of which there is the Viperidae family. The objective of this work is to verify the origin of snakes of genus Bothrops and Crotalus, according to the records of the last 15 years of the serpentarium the University of Caxias do Sul, repr...

Microscopic saw mark analysis: an empirical approach.

Science.gov (United States)

Love, Jennifer C; Derrick, Sharon M; Wiersema, Jason M; Peters, Charles

2015-01-01

Microscopic saw mark analysis is a well published and generally accepted qualitative analytical method. However, little research has focused on identifying and mitigating potential sources of error associated with the method. The presented study proposes the use of classification trees and random forest classifiers as an optimal, statistically sound approach to mitigate the potential for error of variability and outcome error in microscopic saw mark analysis. The statistical model was applied to 58 experimental saw marks created with four types of saws. The saw marks were made in fresh human femurs obtained through anatomical gift and were analyzed using a Keyence digital microscope. The statistical approach weighed the variables based on discriminatory value and produced decision trees with an associated outcome error rate of 8.62-17.82%. © 2014 American Academy of Forensic Sciences.

Production of high titre antibody response against Russell's viper venom in mice immunized with ethanolic extract of fruits of Piper longum L. (Piperaceae) and piperine.

Science.gov (United States)

Shenoy, P A; Nipate, S S; Sonpetkar, J M; Salvi, N C; Waghmare, A B; Chaudhari, P D

2014-01-15

Piper longum L. fruits have been traditionally used against snakebites in north-eastern and southern region of India. The aim of the study was to assess the production of antibody response against Russell's viper venom in mice after prophylactic immunization with ethanolic extract of fruits of Piper longum L. and piperine. The mice sera were tested for the presence of antibodies against Russell's viper venom by in vitro lethality neutralization assay and in vivo lethality neutralization assay. Polyvalent anti-snake venom serum (antivenom) manufactured by Haffkine Bio-Pharmaceutical Corporation Ltd. was used as standard. Further confirmation of presence of antibodies against the venom in sera of mice immunized with PLE and piperine was done using indirect enzyme-linked immunosorbent assay (ELISA) and double immunodiffusion test. Treatment with PLE-treated mice serum and piperine-treated mice serum was found to inhibit the lethal action of venom both in the in vitro lethality neutralization assay and in vivo lethality neutralization assay. ELISA testing indicated that there were significantly high (pPiper longum and piperine produced a high titre antibody response against Russell's viper venom in mice. The antibodies against PLE and piperine could be useful in antivenom therapy of Russell's viper bites. PLE and piperine may also have a potential interest in view of the development of antivenom formulations used as antidote against snake bites. Copyright © 2013 Elsevier GmbH. All rights reserved.

Coagulopathy induced by saw palmetto: a case report.

Science.gov (United States)

Villanueva, Salvador; González, Jenniffer

2009-01-01

Saw palmetto is the most popular herbal supplement used to treat symptoms of benign prostatic hyperplasia (BPH). The safety and efficacy of saw palmetto has been established in the literature. While the majority of studies document the efficacy and safety of saw palmetto, some studies document the adverse side effects, including increased risk of bleeding. There are no reports in the literature about increased prothombin time (PT), partial thromboplastin time (PTT) or international normalized ratio (INR) while using saw palmetto. We present a case of hematuria and coagulopathy in a patient who was using saw palmetto.

Porocephalus species (Pentastomida infecting Boa constrictor (Boidae and Lachesis muta (Viperidae in northeastern Brazil

Directory of Open Access Journals (Sweden)

Waltécio de Oliveira Almeida

2008-01-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2008v21n2p165 Espécies de Porocephalus (Pentastomida infectando Boa constrictor (Boidae e Lachesis muta (Viperidae na Região Nordeste do Brasil.  O Brasil possui uma grande diversidade de cobras, mas há poucos trabalhos realizados sobre parasitismo destas por pentastomídeos. No intuito de investigar o parasitismo pulmonar por pentastomídeos em grandes cobras na região nordeste, foram examinados seis espécimes de Boa constrictor e duas de Lachesis muta pertencentes à coleção do Serpentário da Universidade Federal de Pernambuco–UFPE, todos coletadas em localidades de mata úmida (Mata Atlântica. Apenas um espécime de B. constrictor estava infectado por Porocephalus sp. (intensidade de infecção 5,0. Apenas um espécime de L. muta estava infectado por P. stilesi (intensidade de infecção 15,0.

SAW based systems for mobile communications satellites

Science.gov (United States)

Peach, R. C.; Miller, N.; Lee, M.

1993-01-01

Modern mobile communications satellites, such as INMARSAT 3, EMS, and ARTEMIS, use advanced onboard processing to make efficient use of the available L-band spectrum. In all of these cases, high performance surface acoustic wave (SAW) devices are used. SAW filters can provide high selectivity (100-200 kHz transition widths), combined with flat amplitude and linear phase characteristics; their simple construction and radiation hardness also makes them especially suitable for space applications. An overview of the architectures used in the above systems, describing the technologies employed, and the use of bandwidth switchable SAW filtering (BSSF) is given. The tradeoffs to be considered when specifying a SAW based system are analyzed, using both theoretical and experimental data. Empirical rules for estimating SAW filter performance are given. Achievable performance is illustrated using data from the INMARSAT 3 engineering model (EM) processors.

Chemically sensitive interfaces on SAW devices

Energy Technology Data Exchange (ETDEWEB)

Ricco, A.J.; Martin, S.J. [Sandia National Labs., Albuquerque, NM (United States); Crooks, R.M.; Xu, Chuanjing [Texas A and M Univ., College Station, TX (United States); Allred, R.E. [Adherent Technologies, Inc., Albuquerque, NM (United States)

1993-11-01

Using surface acoustic wave (SAW) devices, three approaches to the effective use of chemically sensitive interfaces that are not highly chemically selective have been examined: (1) molecular identification from time-resolved permeation transients; (2) using multifrequency SAW devices to determine the frequency dependence of analyte/film interactions; (3) use of an array of SAW devices bearing diverse chemically sensitive interfaces to produce a distinct response pattern for each analyte. In addition to their well-known sensitivity to mass changes (0.0035 monolayer of N{sub 2} can be measured), SAW devices respond to the mechanical and electronic properties of thin films, enhancing response information content but making a thorough understanding of the perturbation critical. Simultaneous measurement of changes in frequency and attenuation, which can provide the information necessary to determine the type of perturbation, are used as part of the above discrimination schemes.

Molecular Characterization of Three Novel Phospholipase A2 Proteins from the Venom of Atheris chlorechis, Atheris nitschei and Atheris squamigera

Directory of Open Access Journals (Sweden)

He Wang

2016-06-01

Full Text Available Secretory phospholipase A2 (sPLA2 is known as a major component of snake venoms and displays higher-order catalytic hydrolysis functions as well as a wide range of pathological effects. Atheris is not a notoriously dangerous genus of snakes although there are some reports of fatal cases after envenomation due to the effects of coagulation disturbances and hemorrhaging. Molecular characterization of Atheris venom enzymes is incomplete and there are only a few reports in the literature. Here, we report, for the first time, the cloning and characterization of three novel cDNAs encoding phospholipase A2 precursors (one each from the venoms of the Western bush viper (Atheris chlorechis, the Great Lakes bush viper (Atheris nitschei and the Variable bush viper (Atheris squamigera, using a “shotgun cloning” strategy. Open-reading frames of respective cloned cDNAs contained putative 16 residue signal peptides and mature proteins composed of 121 to 123 amino acid residues. Alignment of mature protein sequences revealed high degrees of structural conservation and identity with Group II venom PLA2 proteins from other taxa within the Viperidae. Reverse-phase High Performance Liquid Chromatography (HPLC profiles of these three snake venoms were obtained separately and chromatographic fractions were assessed for phospholipase activity using an egg yolk suspension assay. The molecular masses of mature proteins were all identified as approximately 14 kDa. Mass spectrometric analyses of the fractionated oligopeptides arising from tryptic digestion of intact venom proteins, was performed for further structural characterization.

The VIMOS Public Extragalactic Redshift Survey (VIPERS). Star formation history of passive red galaxies

Science.gov (United States)

Siudek, M.; Małek, K.; Scodeggio, M.; Garilli, B.; Pollo, A.; Haines, C. P.; Fritz, A.; Bolzonella, M.; de la Torre, S.; Granett, B. R.; Guzzo, L.; Abbas, U.; Adami, C.; Bottini, D.; Cappi, A.; Cucciati, O.; De Lucia, G.; Davidzon, I.; Franzetti, P.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Marchetti, A.; Marulli, F.; Polletta, M.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Arnouts, S.; Bel, J.; Branchini, E.; Ilbert, O.; Gargiulo, A.; Moscardini, L.; Takeuchi, T. T.; Zamorani, G.

2017-01-01

Aims: We trace the evolution and the star formation history of passive red galaxies, using a subset of the VIMOS Public Extragalactic Redshift Survey (VIPERS). The detailed spectral analysis of stellar populations of intermediate-redshift passive red galaxies allows the build up of their stellar content to be followed over the last 8 billion years. Methods: We extracted a sample of passive red galaxies in the redshift range 0.4 quality. The spectra of passive red galaxies were stacked in narrow bins of stellar mass and redshift. We use the stacked spectra to measure the 4000 Å break (D4000) and the Hδ Lick index (HδA) with high precision. These spectral features are used as indicators of the star formation history of passive red galaxies. We compare the results with a grid of synthetic spectra to constrain the star formation epochs of these galaxies. We characterize the formation redshift-stellar mass relation for intermediate-redshift passive red galaxies. Results: We find that at z 1 stellar populations in low-mass passive red galaxies are younger than in high-mass passive red galaxies, similar to what is observed at the present epoch. Over the full analyzed redshift range 0.4 web site is http://www.vipers.inaf.it/

Saw palmetto ethanol extract inhibits adipocyte differentiation.

Science.gov (United States)

Villaverde, Nicole; Galvis, Adriana; Marcano, Adriana; Priestap, Horacio A; Bennett, Bradley C; Barbieri, M Alejandro

2013-07-01

The fruits of saw palmetto have been used for the treatment of a variety of urinary and reproductive system problems. In this study we investigated whether the fruit extracts affect in vitro adipogenesis. Saw palmetto ethanol extract inhibited the lipid droplet accumulation by induction media in a dose-dependent manner, and it also attenuated the protein expressions of C-EBPα and PPARγ. Phosphorylation of Erk1/2 and Akt1 were also decreased by saw palmetto ethanol extract. This report suggests that saw palmetto extracts selectively affect the adipocyte differentiation through the modulation of several key factors that play a critical role during adipogenesis.

Hypopituitarism following envenoming by Russell's vipers (Daboia siamensis and D. russelii) resembling Sheehan's syndrome: first case report from Sri Lanka, a review of the literature and recommendations for endocrine management.

Science.gov (United States)

Antonypillai, C N; Wass, J A H; Warrell, D A; Rajaratnam, H N

2011-02-01

Russell's vipers (Daboia russelii and D. siamensis) inhabit 10 South and South East Asian countries. People envenomed by these snakes suffer coagulopathy, bleeding, shock, neurotoxicity, acute kidney injury and local tissue damage leading to severe morbidity and mortality. An unusual complication of Russell's viper bite envenoming in Burma (D. siamensis) and southern India (D. russelii) is hypopituitarism but until now it has not been reported elsewhere. Here, we describe the first case of hypopituitarism following Russell's viper bite in Sri Lanka, review the literature on this subject and make recommendations for endocrine investigation and management. A 49-year-old man was bitten and seriously envenomed by D. russelii in 2005. He was treated with antivenom but although he recovered from the acute effects he remained feeling unwell. Hypopituitarism, with deficiencies of gonadal, steroid and thyroid axes, was diagnosed 3 years later. He showed marked improvement after replacement of anterior pituitary hormones. We attribute his hypopituitarism to D. russelii envenoming. Russell's viper bite is known to cause acute and chronic hypopituitarism and diabetes insipidus, perhaps through deposition of fibrin microthrombi and haemorrhage in the pituitary gland resulting from the action of venom procoagulant enzymes and haemorrhagins. Forty nine cases of hypopituitarism following Russell's viper bite have been described in the English language literature. Patients with acute hypopituitarism may present with hypoglycaemia and hypotension during the acute phase of envenoming. Those with chronic hypopituitarism seem to have recovered from envenoming but present later with features of hypopituitarism. Over 85% of these patients had suffered acute kidney injury immediately after the bite. Steroid replacement in acute hypopituitarism is life saving. All 11 patients with chronic hypopituitarism in whom the outcome of treatment was reported, showed marked improvement with hormone

THE USE OF THE ANTI-VENOM SPECIFIC ANTIBODIES ISOLATED FROM DUCK EGGS FOR INACTIVATION OF THE VIPER VENOM

Directory of Open Access Journals (Sweden)

ADRIANA CRISTE

2008-05-01

Full Text Available The activity of specific anti-venom can be demonstrated using protection test in laboratory mice. Our study aimed to emphasize the possibility of viper venom inactivation by the antibodies produced and isolated from duck eggs and also to the activation concentration of these antibodies. The venom used for inoculation was harvested from two viper species (Vipera ammodytes and Vipera berus. The immunoglobulin extract had a better activity on the venom from Vipera berus compared to the venom from Vipera ammodytes. This could be the result of a better immunological response, as consequence of the immunization with this type of venom, compared to the response recorded when the Vipera ammodytes venom was used. Besides the advantages of low cost, high productivity and reduced risk of anaphylactic shock, the duck eggs also have high activity up to dilutions of 1/16, 1/32, respectively, with specific activity and 100 surviving in individuals which received 3 x DL50.

Circular sawing experiments on a radial arm saw

Science.gov (United States)

Charles W. McMillin; J.L. Lubxin

1959-01-01

Several years ago, the American Machine and Foundry Co. decided to conduct a comprehensive investigation in the field of cutting processes. The initial emphasis has been on circular sawing because of the product line of the company's DeWalt Division. As a nevessary antecedent to theoretical and experimental investigations, an extensive review of the literature on...

Saw palmetto supplement use and prostate cancer risk.

Science.gov (United States)

Bonnar-Pizzorno, Raven M; Littman, Alyson J; Kestin, Mark; White, Emily

2006-01-01

Saw palmetto is an herb used to treat the symptoms of benign prostatic hyperplasia. In vitro studies have found that saw palmetto inhibits growth of prostatic cancer cells and may induce apoptosis. To evaluate whether saw palmetto supplements are associated with a reduced risk of prostate cancer, we conducted a prospective cohort study of 35,171 men aged 50-76 yr in western Washington state. Subjects completed questionnaires between 2000 and 2002 on frequency of use of saw palmetto supplements and saw palmetto-containing multivitamins over the previous 10 yr in addition to other information on supplement intake, medical history, and demographics. Men were followed through December 2003 (mean of 2.3 yr of follow-up) via the western Washington Surveillance, Epidemiology, and End Results cancer registry, during which time 580 developed prostate cancer. Ten percent of the cohort used saw palmetto at least once per week for a year in the 10 yr before baseline. No association was found between this level of use of saw palmetto and risk of prostate cancer development [hazard ratio (HR) = 0.95; 95% confidence interval = 0.74-1.23] or with increasing frequency or duration of use. In this free-living population, use of commercial saw palmetto, which varies widely in dose and constituent ratios, was not associated with prostate cancer risk.

The VIMOS Public Extragalactic Redshift Survey (VIPERS). An unbiased estimate of the growth rate of structure at ⟨z⟩ = 0.85 using the clustering of luminous blue galaxies

Science.gov (United States)

Mohammad, F. G.; Granett, B. R.; Guzzo, L.; Bel, J.; Branchini, E.; de la Torre, S.; Moscardini, L.; Peacock, J. A.; Bolzonella, M.; Garilli, B.; Scodeggio, M.; Abbas, U.; Adami, C.; Bottini, D.; Cappi, A.; Cucciati, O.; Davidzon, I.; Franzetti, P.; Fritz, A.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marulli, F.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Arnouts, S.; Coupon, J.; De Lucia, G.; Ilbert, O.; Moutard, T.

2018-02-01

We used the VIMOS Public Extragalactic Redshift Survey (VIPERS) final data release (PDR-2) to investigate the performance of colour-selected populations of galaxies as tracers of linear large-scale motions. We empirically selected volume-limited samples of blue and red galaxies as to minimise the systematic error on the estimate of the growth rate of structure fσ8 from the anisotropy of the two-point correlation function. To this end, rather than rigidly splitting the sample into two colour classes we defined the red or blue fractional contribution of each object through a weight based on the (U - V ) colour distribution. Using mock surveys that are designed to reproduce the observed properties of VIPERS galaxies, we find the systematic error in recovering the fiducial value of fσ8 to be minimised when using a volume-limited sample of luminous blue galaxies. We modelled non-linear corrections via the Scoccimarro extension of the Kaiser model (with updated fitting formulae for the velocity power spectra), finding systematic errors on fσ8 of below 1-2%, using scales as small as 5 h-1 Mpc. We interpret this result as indicating that selection of luminous blue galaxies maximises the fraction that are central objects in their dark matter haloes; this in turn minimises the contribution to the measured ξ(rp,π) from the 1-halo term, which is dominated by non-linear motions. The gain is inferior if one uses the full magnitude-limited sample of blue objects, consistent with the presence of a significant fraction of blue, fainter satellites dominated by non-streaming, orbital velocities. We measured a value of fσ8 = 0.45 ± 0.11 over the single redshift range 0.6 ≤ z ≤ 1.0, corresponding to an effective redshift for the blue galaxies ⟨z⟩=0.85. Including in the likelihood the potential extra information contained in the blue-red galaxy cross-correlation function does not lead to an appreciable improvement in the error bars, while it increases the systematic error

The VIMOS Public Extragalactic Redshift Survey (VIPERS). Downsizing of the blue cloud and the influence of galaxy size on mass quenching over the last eight billion years

Science.gov (United States)

Haines, C. P.; Iovino, A.; Krywult, J.; Guzzo, L.; Davidzon, I.; Bolzonella, M.; Garilli, B.; Scodeggio, M.; Granett, B. R.; de la Torre, S.; De Lucia, G.; Abbas, U.; Adami, C.; Arnouts, S.; Bottini, D.; Cappi, A.; Cucciati, O.; Franzetti, P.; Fritz, A.; Gargiulo, A.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marulli, F.; Moutard, T.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Zamorani, G.; Bel, J.; Branchini, E.; Coupon, J.; Ilbert, O.; Moscardini, L.; Peacock, J. A.; Siudek, M.

2017-08-01

We use the full VIPERS redshift survey in combination with SDSS-DR7 to explore the relationships between star-formation history (using d4000), stellar mass and galaxy structure, and how these relationships have evolved since z 1. We trace the extents and evolutions of both the blue cloud and red sequence by fitting double Gaussians to the d4000 distribution of galaxies in narrow stellar mass bins, for four redshift intervals over 0 1011M⊙, d4000 web site is http://www.vipers.inaf.it/

Unusual suicide by electric saw: A case report

Directory of Open Access Journals (Sweden)

M. Zribi

2015-09-01

Full Text Available Suicide by power saws (bland, chain, circular or router saw are an extreme exception. A few case reports are published in forensic literature regarding it. We report the case of a 30-year-old carpenter found dead lying on the floor next to a router saw in his carpenter workshop, with two gaping and deep wounds in his head. We summarize the findings of the death scene examination, the forensic autopsy, and the world literature concerning suicide committed with power saws.

Application of the chain saw machine for underground quarry

Energy Technology Data Exchange (ETDEWEB)

Lim, Han-Uk; Baek, Hwan-Jo [Kangwon National University, Chuncheon(Korea); Kim, Chi-Hwan [Woosuk University, Wonju(Korea); Kim, Tae-Soo [Sungshin Mining Co., Jungseun(Korea)

2001-10-31

Many regulatory activities for preservation of the environment make it recently difficult for the stone industry in our country. To reduce environmental hazards and to conserve original surface and woods, some effective underground methods must be adopted. Some new techniques such as chain saw machine, diamond wire saw and water jet cutting can be considered. But application of chain saw machine for underground quarry is proposed in this study. Some technical adoptions with chain saw were carried out at Jungseun marble mine. It is proved that this machine can be effectively adopted to cut dimension stone. With chain saw and diamond wire saw, it can be expected to achieve more effectively cutting the dimension stone. (author). 6 refs., 3 tabs., 6 figs.

Amblyomma rotundatum (Koch, 1844 (Acari: Ixodidae two-host life-cycle on Viperidae snakes Ciclo dioxênico em Amblyomma rotundatum (Koch, 1844 (Acari: Ixodidaeparasitando serpentes da família Viperidae

Directory of Open Access Journals (Sweden)

Daniel Sobreira Rodrigues

2010-09-01

Full Text Available Amblyomma rotundatum is an ixodid tick that infests ectothermic animals and reproduces exclusively by parthenogenesis. This tick has been frequently reported to infest reptiles and amphibians, under natural conditions and sometimes in captivity. It was described in Brazil and several other countries of South, Central and North America. Although many studies have reported aspects of its biology, none of them has used regularly either ophidian as hosts, or controlled temperature, humidity and luminosity for parasitic stages. The objective of this experiment was to study the life cycle of A. rotundatum feeding on Viperidae snakes under room controlled conditions at 27 ± 1 ºC temperature, 85 ± 10% relative humidity and 12:12 hours photoperiod for parasitic stages, and under B.O.D incubator conditions at 27 ± 1 ºC temperature, 85 ± 10% relative humidity and scotophase for non-parasitic stages. The total duration of the life cycle ranged from 56 to 163 days (mean of 105 days. Two-host life cycle was observed for most of the ixodid population studied.Amblyomma rotundatum é um carrapato da família Ixodidae, parasito de animais pecilotérmicos, e que se reproduz exclusivamente por partenogênese. Este carrapato é frequentemente relatado infestando répteis e anfíbios em condições naturais e, às vezes, em animais de cativeiro. Ele já foi relatado no Brasil e em vários outros países das Américas do Sul, Central e do Norte. Embora muitos estudos sobre sua biologia tenham sido publicados, nunca foram utilizados ofídios como hospedeiros e, tão pouco, foram realizados ensaios com os estádios parasitários sob condições controladas de temperatura, umidade e iluminação. O objetivo deste experimento foi estudar o ciclo biológico de A. rotundatum se alimentando em serpentes da família Viperidae sob condições ambientais controladas a 27 ± 1 ºC de temperatura, 85 ± 10% de umidade relativa do ar e 12:12 horas de fotoperíodo para est

Morphology of the snake spectacle reflects its evolutionary adaptation and development.

Science.gov (United States)

Da Silva, Mari-Ann Otkjaer; Heegaard, Steffen; Wang, Tobias; Gade, Jacob Thorup; Damsgaard, Christian; Bertelsen, Mads Frost

2017-08-18

Covering the eye of all snakes is a transparent integumental structure known as the spectacle. In order to determine variations in spectacle thickness among species, the spectacles of 217 alcohol-preserved museum specimens of 44 species belonging to 14 different families underwent optical coherence tomography (OCT) to measure spectacular thickness. Multivariable analyses were made to determine whether family, activity period (diurnal/nocturnal) and habitat (arboreal/terrestrial/fossorial/aquatic) influenced spectacle thickness. The thinnest spectacles in absolute terms were found in the Usambara bush viper (Viperidae) with a thickness of 74 ± 9 μm and the absolute thickest spectacle was found in the red-tailed pipe snake (Cylindrophiidae) which had a spectacle thickness of 244 ± 57 μm. Fossorial and aquatic snakes had significantly thicker spectacles than arboreal and terrestrial snakes. When spectacle thickness was correlated to eye size (horizontal spectacle diameter), Gray's earth snake (Uropeltidae) had the lowest ratio (1:7) and the cottonmouth (Viperidae) had the highest ratio (1:65). Multivariable and phylogenetic analyses showed that spectacular thickness could be predicted by taxonomic family and habitat, but not activity period. This phylogenetically broad systematic study of the thickness of the snake spectacle showed that spectacular thickness varies greatly across snake species and may reflect evolutionary adaptation and development.

Analyzing Investments in Thin-Kerf Saws

Science.gov (United States)

Philip H. Steele; Philip A. Araman

1996-01-01

The rising cost of hardwood sawlogs has increasd sawmill managers' interest in considering the installation of thin-kerf sawing machines in their sawmills. Replacement of circular headrigs by band headrigs and/or reducing resaw kerfs are the available options. Equipment replacement or modification to achieve thin-kerf sawing will require an investment. Sawmill...

Arc saw and its application to decommissioning

International Nuclear Information System (INIS)

Deichelbohrer, P.R.

1982-01-01

The arc saw is a toothless, circular saw that cuts by arc erosion. A model was built to study the arc saw's usefulness in cutting up radioactively contaminated metal scrap. It was chosen because it cuts with very little contact to the work piece and because cutting is not affected by material hardness. After installation of several improvements it was found it could cut almost any combination of metals and that clamping or fixturing requirements were minimum. Cutting proceeds rapidly and efficiently

Evolutionary origins and development of saw-teeth on the sawfish and sawshark rostrum (Elasmobranchii; Chondrichthyes).

Science.gov (United States)

Welten, Monique; Smith, Moya Meredith; Underwood, Charlie; Johanson, Zerina

2015-09-01

A well-known characteristic of chondrichthyans (e.g. sharks, rays) is their covering of external skin denticles (placoid scales), but less well understood is the wide morphological diversity that these skin denticles can show. Some of the more unusual of these are the tooth-like structures associated with the elongate cartilaginous rostrum 'saw' in three chondrichthyan groups: Pristiophoridae (sawsharks; Selachii), Pristidae (sawfish; Batoidea) and the fossil Sclerorhynchoidea (Batoidea). Comparative topographic and developmental studies of the 'saw-teeth' were undertaken in adults and embryos of these groups, by means of three-dimensional-rendered volumes from X-ray computed tomography. This provided data on development and relative arrangement in embryos, with regenerative replacement in adults. Saw-teeth are morphologically similar on the rostra of the Pristiophoridae and the Sclerorhynchoidea, with the same replacement modes, despite the lack of a close phylogenetic relationship. In both, tooth-like structures develop under the skin of the embryos, aligned with the rostrum surface, before rotating into lateral position and then attaching through a pedicel to the rostrum cartilage. As well, saw-teeth are replaced and added to as space becomes available. By contrast, saw-teeth in Pristidae insert into sockets in the rostrum cartilage, growing continuously and are not replaced. Despite superficial similarity to oral tooth developmental organization, saw-tooth spatial initiation arrangement is associated with rostrum growth. Replacement is space-dependent and more comparable to that of dermal skin denticles. We suggest these saw-teeth represent modified dermal denticles and lack the 'many-for-one' replacement characteristic of elasmobranch oral dentitions.

Programmable SAW development :Sandia/NASA project final report.

Energy Technology Data Exchange (ETDEWEB)

Brocato, Robert Wesley

2004-10-01

This report describes a project to develop both fixed and programmable surface acoustic wave (SAW) correlators for use in a low power space communication network. This work was funded by NASA at Sandia National Laboratories for fiscal years 2004, 2003, and the final part of 2002. The role of Sandia was to develop the SAW correlator component, although additional work pertaining to use of the component in a system and system optimization was also done at Sandia. The potential of SAW correlator-based communication systems, the design and fabrication of SAW correlators, and general system utilization of those correlators are discussed here.

Arc saw and its application to decommissioning

International Nuclear Information System (INIS)

Deichelbohrer, P.R.

1982-01-01

The arc saw is a toothless, circular saw that cuts by arc erosion. A model was built to study the arc saw's usefulness in cutting up radioactively contaminated metal scrap. It was chosen because it cuts with very little contact to the work piece and because cutting is not affected by material hardness. After installation of several improvements it was found it could cut almost any combination of metals and that clamping or fixturing requirements were minimum. Cutting proceeds rapidly and efficiently. 10 figures

What Jane Saw

Directory of Open Access Journals (Sweden)

Kate Singer

2013-11-01

Full Text Available Review of Professor Janine Barchas' "What Jane Saw?" a website that reconstructs Joshua Reynolds's 1813 retrospective art exhibit, which Jane Austen attended, with particular attention to the Regency social and cultural history depicted in Austen's novels.

Occurrence of Cryptosporidium (Apicomplexa, Cryptosporidiidae in Crotalus durissus terrificus (Serpentes, Viperidae in Brazil

Directory of Open Access Journals (Sweden)

Karasawa Andréa Satie Matsubara

2002-01-01

Full Text Available The objective of the present study was to investigate the prevalence of Cryptosporidium (Apicomplexa, Cryptosporidiidae in the snake Crotalus durissus terrificus (Serpentes, Viperidae. Fifty animals were evaluated for the presence of oocysts of Cryptosporidium sp. at the time of arrival and 30 and 60 days later. Intestinal washings with saline solution (1% body weight, fecal samples, and organ scrapings were collected during the study. Oocysts were concentrated by an ether-phosphate-buffered saline sedimentation technique and then separated by a density gradient centrifugation technique. Smears were made with the sediment and submitted to modified acid-fast and auramine-rhodamine staining. Cryptosporidium-positive smears were used as controls for the experimental findings. The overall prevalence of Cryptosporidium sp. oocysts was 14%. Among the positive snakes, oocysts were detected only in the intestinal washing in two specimens, only in the feces in four specimens, and in both materials at least once in one specimen. The positive snakes were predominantly from Santa Maria da Serra city State of São Paulo (57.1%. We also observed that all of the examinations that presented positive results were obtained at least 27 days after the capture of the animals.

Study of low insertion loss and miniaturization wavelet transform and inverse transform processor using SAW devices.

Science.gov (United States)

Jiang, Hua; Lu, Wenke; Zhang, Guoan

2013-07-01

In this paper, we propose a low insertion loss and miniaturization wavelet transform and inverse transform processor using surface acoustic wave (SAW) devices. The new SAW wavelet transform devices (WTDs) use the structure with two electrode-widths-controlled (EWC) single phase unidirectional transducers (SPUDT-SPUDT). This structure consists of the input withdrawal weighting interdigital transducer (IDT) and the output overlap weighting IDT. Three experimental devices for different scales 2(-1), 2(-2), and 2(-3) are designed and measured. The minimum insertion loss of the three devices reaches 5.49dB, 4.81dB, and 5.38dB respectively which are lower than the early results. Both the electrode width and the number of electrode pairs are reduced, thus making the three devices much smaller than the early devices. Therefore, the method described in this paper is suitable for implementing an arbitrary multi-scale low insertion loss and miniaturization wavelet transform and inverse transform processor using SAW devices. Copyright © 2013 Elsevier B.V. All rights reserved.

Log and tree sawing times for hardwood mills

Science.gov (United States)

Everette D. Rast

1974-01-01

Data on 6,850 logs and 1,181 trees were analyzed to predict sawing times. For both logs and trees, regression equations were derived that express (in minutes) sawing time per log or tree and per Mbf. For trees, merchantable height is expressed in number of logs as well as in feet. One of the major uses for the tables of average sawing times is as a bench mark against...

Reconstructing see-saw models

International Nuclear Information System (INIS)

Ibarra, Alejandro

2007-01-01

In this talk we discuss the prospects to reconstruct the high-energy see-saw Lagrangian from low energy experiments in supersymmetric scenarios. We show that the model with three right-handed neutrinos could be reconstructed in theory, but not in practice. Then, we discuss the prospects to reconstruct the model with two right-handed neutrinos, which is the minimal see-saw model able to accommodate neutrino observations. We identify the relevant processes to achieve this goal, and comment on the sensitivity of future experiments to them. We find the prospects much more promising and we emphasize in particular the importance of the observation of rare leptonic decays for the reconstruction of the right-handed neutrino masses

Piezoelectric Analysis of Saw Sensor Using Finite Element Method

Directory of Open Access Journals (Sweden)

Vladimír KUTIŠ

2013-06-01

Full Text Available In this contribution modeling and simulation of surface acoustic waves (SAW sensor using finite element method will be presented. SAW sensor is made from piezoelectric GaN layer and SiC substrate. Two different analysis types are investigated - modal and transient. Both analyses are only 2D. The goal of modal analysis, is to determine the eigenfrequency of SAW, which is used in following transient analysis. In transient analysis, wave propagation in SAW sensor is investigated. Both analyses were performed using FEM code ANSYS.

Torque-Controlled Adaptive Speed Control on a CNC Marble Saw Machine

Directory of Open Access Journals (Sweden)

Ugur Simsir

2015-02-01

Full Text Available Although CNC marble saw machines can automatically cut marble slabs to desired dimensions, saw speed and feed rate are selected by operator according to stone parameters, features of the saw, and its immersion depth. If the feed rate is selected lower than the optimal value, there will be time-loss and capacity deficiencies or if it is selected faster, cutting quality will decrease, spindle motor will draw more current, and saw blade will corrode faster. While cutting especially thick materials, saw may be stacked in the stone, cutting quality may be impaired, saw blade may be abraded earlier, precision quality may go down because of increase in measurement errors, and machine may be damaged with the increase in vibrations when improper feed rates are selected. Because of nonhomogeneity of the slabs and deterioration of the saw blade, operator cannot determine a persistent feed rate. This study is targeted to find saw speeds according to saw diameter and optimum feed rate by means of limiting vibrations and current drawn from saw motor and torque accordingly in order to increase working performance of CNC marble saw machines. Thanks to adaptive adjustment of feed rate, one can save on material as well as time, labour, and cost by making use of optimum energy.

Strike kinematics and performance in juvenile ball pythons (Python regius).

Science.gov (United States)

Ryerson, William G; Tan, Weimin

2017-08-01

The rapid strike of snakes has interested researchers for decades. Although most work has focused on the strike performance of vipers, recent work has shown that other snakes outside of the Viperidae can strike with the same velocities and accelerations. However, to date all of these examples focus on performance in adult snakes. Here, we use high-speed video to measure the strike kinematics and performance of 10 juvenile (pythons, Python regius. We find that juvenile P. regius strike at levels comparable to larger snakes, but with shorter durations and over shorter distances. We conclude that the juvenile P. regius maintain performance likely through manipulation of the axial musculature and accompanying elastic tissues, and that this is a first step to understanding ontogenetic changes in behavior and a potential avenue for understanding how captivity may also impact behavior. © 2017 Wiley Periodicals, Inc.

Tip stabilizer for a chain saw. Final report

Energy Technology Data Exchange (ETDEWEB)

Morabit, V.D.

1993-09-10

Prior to receiving the grant, Utilitip was faced with an idea that truly worked, however only a very limited line of component parts would fit various types of chain saws on the market. It also suffered from a severe problem when engaged in the ground of soil penetrating the saw chain area, thus eliminating one of the major benefits of keeping the chain sharp. Consequently, the grant funding was directed towards extending the tooling capabilities to produce parts for a much wider variety of chain saws that are on the market, and further by developing an effective flexible soil shield to prevent abrasive soil entry into the saw chain. Utilitip was able to complete a full set of design for a wide variety of large and small chain saws. This incorporated a design and fabrication of a small Utilitip, as well as a small anti-kickback device. In addition, tooling was also further developed for the large Utilitip and the large anti-kickback device. Accordingly, multiple tools are available for all combinations, as well as back-up provisions. Utilitip, Inc. invented a special, flexible attachment to be glued and/or molded to the tip guard. The soil shield prevents abrasive soil from coming into the chain area. In addition, it allows a flexible arrangement to allow the chain saw to be released from brush without binding. Otherwise, a larger, rigid soil shield would hold or restrict the saw in heavy brush. The rubber shield will flex out of the say and reduce, if not eliminate, this harmful binding.

Fatty acid and phytosterol content of commercial saw palmetto supplements.

Science.gov (United States)

Penugonda, Kavitha; Lindshield, Brian L

2013-09-13

Saw palmetto supplements are one of the most commonly consumed supplements by men with prostate cancer and/or benign prostatic hyperplasia (BPH). Some studies have found significant improvements in BPH and lower urinary tract symptoms (LUTS) with saw palmetto supplementation, whereas others found no benefits. The variation in the efficacy in these trials may be a result of differences in the putative active components, fatty acids and phytosterols, of the saw palmetto supplements. To this end, we quantified the major fatty acids (laurate, myristate, palmitate, stearate, oleate, linoleate) and phytosterols (campesterol, stigmasterol, β-sitosterol) in 20 commercially available saw palmetto supplements using GC-FID and GC-MS, respectively. Samples were classified into liquids, powders, dried berries, and tinctures. Liquid saw palmetto supplements contained significantly higher (p saw palmetto supplements may be the best choice for individuals who want to take a saw palmetto supplement with the highest concentrations of both fatty acids and phytosterols.

Acute pancreatitis with saw palmetto use: a case report

Directory of Open Access Journals (Sweden)

Amankona Raymond

2011-08-01

Full Text Available Abstract Introduction Saw palmetto is a phytotherapeutic agent commercially marketed for the treatment of benign prostatic hyperplasia. Evidence suggests that saw palmetto is a safe product, and mild gastrointestinal adverse effects have been reported with its use. We report a case of acute pancreatitis, possibly secondary to the use of saw palmetto. Case presentation A 61-year-old Caucasian man with a history of benign prostatic hyperplasia and gastroesophageal reflux disease developed epigastric pain associated with nausea 36 hours prior to presentation. He denied drinking alcohol prior to the development of his symptoms. His home medications included saw palmetto, lansoprazole and multivitamins. Laboratory results revealed elevated lipase and amylase levels. An abdominal ultrasound demonstrated a nondilated common bile duct, without choledocholithiasis. Computed tomography of his abdomen showed the pancreatic tail with peripancreatic inflammatory changes, consistent with acute pancreatitis. Our patient's condition improved with intravenous fluids and pain management. On the fourth day of hospitalization his pancreatic enzymes were within normal limits: he was discharged home and advised to avoid taking saw palmetto. Conclusion It is our opinion that a relationship between saw palmetto and the onset of acute pancreatitis is plausible, and prescribers and users of saw palmetto should be alert to the possibility of such adverse reactions.

Acute pancreatitis with saw palmetto use: a case report.

Science.gov (United States)

Bruminhent, Jackrapong; Carrera, Perliveh; Li, Zhongzhen; Amankona, Raymond; Roberts, Ingram M

2011-08-25

Saw palmetto is a phytotherapeutic agent commercially marketed for the treatment of benign prostatic hyperplasia. Evidence suggests that saw palmetto is a safe product, and mild gastrointestinal adverse effects have been reported with its use. We report a case of acute pancreatitis, possibly secondary to the use of saw palmetto. A 61-year-old Caucasian man with a history of benign prostatic hyperplasia and gastroesophageal reflux disease developed epigastric pain associated with nausea 36 hours prior to presentation. He denied drinking alcohol prior to the development of his symptoms. His home medications included saw palmetto, lansoprazole and multivitamins. Laboratory results revealed elevated lipase and amylase levels. An abdominal ultrasound demonstrated a nondilated common bile duct, without choledocholithiasis. Computed tomography of his abdomen showed the pancreatic tail with peripancreatic inflammatory changes, consistent with acute pancreatitis. Our patient's condition improved with intravenous fluids and pain management. On the fourth day of hospitalization his pancreatic enzymes were within normal limits: he was discharged home and advised to avoid taking saw palmetto. It is our opinion that a relationship between saw palmetto and the onset of acute pancreatitis is plausible, and prescribers and users of saw palmetto should be alert to the possibility of such adverse reactions.

Cutting techniques of reinforced concrete by wire sawing

International Nuclear Information System (INIS)

Miyao, Hidehiko; Komatsu, Junji; Kamiyama, Yoshinori; Yasoshima, Harunori; Kukino, Yoshinori; Yamamoto, Yuichi; Miyazaki, Takashi; Aritomi, Masanori

1995-01-01

The Research Association for Nuclear Facility Decommissioning (RANDEC) has been carrying out demonstration tests to improve current technologies for decommissioning. The conceptual dismantling system has been studied and basic cutting tests have been carried out by wire sawing. In terms of waste management and dismantling efficiency, the diamond wire saw cutting method has advantages for cutting radioactive concrete in large blocks. A conceptual design for a dismantling system for various concrete shieldings of nuclear facilities has been developed and diamond wire sawing has been designed and manufactured. The basic cutting tests by wire sawing have been carried out to obtain quantitative data, in addition to the conceptual design of a dismantling system for biological shielding of various power reactors (PWR, BWR, GCR) and cell walls of nuclear fuel cycle facilities. On the basis of the conceptual dismantling system and quantitative cutting performance data, wire sawing equipment has been manufactured for use in nuclear facilities. This study was performed on consignment for the Science and Technology Agency of Japan. (author)

A Rare Case Series of Ischemic Stroke Following Russell’s Viper Snake Bite in India

Directory of Open Access Journals (Sweden)

Venkata Krishna Pothukuchi

2018-01-01

Full Text Available Snakebite is an important medical problem in India. Among their various manifestations, cerebral complications are uncommonly found in literature. Moreover, Ischemic stroke following snake bite is quite rare. Here we report a case series of two such cases that developed neurological manifestations following Russell’s viper bite. On computerized tomography (CT scan of brain; cerebral infarcts were revealed. Their likely mechanisms are discussed in present study which include disseminated intravascular coagulation, toxin induced vasculitis and endothelial damage.

Microhabitat use by species of the genera Bothrops and Crotalus (Viperidae in semi-extensive captivity

Directory of Open Access Journals (Sweden)

CA Gomes

2012-01-01

Full Text Available Many factors influence microhabitat including climate and the occurrence of predators, prey and suitable shelters. The influence of predators in a semi-extensive breeding system is minimized due to frequent monitoring of the area. This situation enables the independent analysis of such other variables as refuges and temperature. Some specimens of the Viperidae family are kept in a semi-extensive breeding system at the Butantan Institute for display and study. These animals are widely distributed in the Atlantic Forest and Cerrado, two biomes with distinct climatic characteristics. We compared the daily activity pattern and microhabitat use of the species Bothrops jararaca and Crotalus durissus terrificus. Our main questions were whether rattlesnakes and lancehead snakes respond to habitat selection differently in similar climatic conditions and if they choose similar microhabitats. Species of the genus Bothrops were frequently found under shelters regardless of the time of day. On the other hand, snakes of the genus Crotalus were frequently found sheltered during the early morning, then migrated to sunnier areas and returned to shelters in late afternoon.

SAW Sensors for Chemical Vapors and Gases.

Science.gov (United States)

Devkota, Jagannath; Ohodnicki, Paul R; Greve, David W

2017-04-08

Surface acoustic wave (SAW) technology provides a sensitive platform for sensing chemicals in gaseous and fluidic states with the inherent advantages of passive and wireless operation. In this review, we provide a general overview on the fundamental aspects and some major advances of Rayleigh wave-based SAW sensors in sensing chemicals in a gaseous phase. In particular, we review the progress in general understanding of the SAW chemical sensing mechanism, optimization of the sensor characteristics, and the development of the sensors operational at different conditions. Based on previous publications, we suggest some appropriate sensing approaches for particular applications and identify new opportunities and needs for additional research in this area moving into the future.

SAW Sensors for Chemical Vapors and Gases

Science.gov (United States)

Devkota, Jagannath; Ohodnicki, Paul R.; Greve, David W.

2017-01-01

Surface acoustic wave (SAW) technology provides a sensitive platform for sensing chemicals in gaseous and fluidic states with the inherent advantages of passive and wireless operation. In this review, we provide a general overview on the fundamental aspects and some major advances of Rayleigh wave-based SAW sensors in sensing chemicals in a gaseous phase. In particular, we review the progress in general understanding of the SAW chemical sensing mechanism, optimization of the sensor characteristics, and the development of the sensors operational at different conditions. Based on previous publications, we suggest some appropriate sensing approaches for particular applications and identify new opportunities and needs for additional research in this area moving into the future. PMID:28397760

Características biológicas e inmunológicas del veneno de Bothrops cotiara (Serpentes: Viperidae

Directory of Open Access Journals (Sweden)

Adolfo Rafael de Roodt

2006-09-01

Full Text Available Bothrops cotiara es una serpiente que se encuentra en la provincia de Misiones (Argentina, el Sur de Brasil y Paraguay. La información sobre las características clínicas de los accidentes por esta serpiente es muy escasa y existen pocos datos sobre su veneno y la capacidad neutralizante de las actividades tóxicas del mismo por antivenenos terapéuticos. En este trabajo se estudiaron características bioquímicas, actividades tóxicas y la reactividad inmunoquímica del veneno de B. cotiara. Seis antivenenos anti Viperinos Sudamericanos fueron estudiados frente a este veneno por el método ELISA y se probó la capacidad neutralizante de tres de estos frente a las actividades hemorrágica, necrotizante, procoagulante, trombina-símil, hemolítica indirecta y la potencia letal de veneno de ejemplares de B. cotiara de la provincia de Misiones. Los patrones cromatográficos y electroforéticos mostraron características similares a los de otros venenos de Bothrops. Las actividades tóxicas estuvieron dentro de los ámbitos descritos para los venenos botrópicos. Los seis antivenenos mostraron gran reactividad inmunoquímica por ELISA y las potencias neutralizantes de los tres estudiados fueron muy próximas para las actividades letal, hemorrágica, necrotizante, hemolítica indirecta, coagulante y trombina-símil. Los resultados de los estudios de neutralización indicarían que ante la mordedura de esta poco común especie de Bothrops, pueden usarse los diferentes tipos de antivenenos botrópicos o botrópico-crotálicos para uso terapéutico disponibles en esa región.Biological and immunological characteristics of the poison of Bothrops cotiara (Serpentes: Viperidae. Bothrops cotiara is a venomous snake sporadically found in the province of Misiones in Argentina, South of Brazil and Paraguay. Data on the clinics of the envenomation produced by its bite and on its venom are scarce. There is no information on the neutralizing capacity of the

A possible case of saw palmetto-induced pancreatitis.

Science.gov (United States)

Wargo, Kurt A; Allman, Elena; Ibrahim, Farrah

2010-07-01

A 65-year-old male with a history of diabetes, hypertension, hyperlipidemia, gout, Barrett esophagitis, and chronic gastritis developed acute pancreatitis after taking one week of the herbal medicine, saw palmetto, for symptoms related to benign prostatic hyperplasia (BPH). Ultrasound and computed tomography ruled out cholelithiasis and obstruction, triglycerides were normal, and he had no recent infection or trauma. He had a history of occasional alcohol consumption, though there was no recent increased intake. The most likely cause of pancreatitis in this case was saw palmetto. Saw palmetto (Serenoa repens) is an herbal medication used primarily in the treatment of symptoms related to BPH. It has a high content of fatty acids and phytosterols which are thought to exert their effects by inhibiting the enzyme 5-alpha-reductase, thereby preventing the conversion of testosterone into dihydrotestosterone (DHT). It has been postulated that saw palmetto directly stimulates estrogenic receptors and inhibits progesterone receptors in the prostate tissue. A previous report implicated the estrogen/antiandrogen properties of saw palmetto as inducing hepatotoxicity in a patient. Additionally, it has also been postulated that stimulation of the estrogenic receptors may lead to increased triglyceride levels or induction of a hypercoagulable state that leads to pancreatic necrosis. Finally, inhibition of cyclooxygenase, a property of saw palmetto, may be linked to acute pancreatitis. Acute pancreatitis, a serious and sometimes fatal disorder may occur secondary to medications. Although the mechanism is not fully known, this is the second case of acute pancreatitis that has been documented secondary to the herbal medication saw palmetto. It is important for clinicians to obtain detailed medication histories, including over-the-counter and herbal medications, in order to prevent further complications from occurring.

Saw palmetto and benign prostatic hyperplasia.

Science.gov (United States)

Gong, Edward M; Gerber, Glenn S

2004-01-01

Benign prostatic hyperplasia (BPH) is a common health issue that affects 8% of all men at the age of 40, 60% of men in their 70s, and 90% of those greater than 80 years of age. One-fourth of these men will develop moderate to severe lower urinary tract symptoms that greatly affect their quality of life. Recent evidence suggests that the use of saw palmetto leads to improvements in urinary function for those suffering from BPH. The favorable comparison of saw palmetto with tamsulosin, a well-known first line agent in the treatment of urinary tract symptoms, demonstrates promise towards a beneficial effect of this herbal agent, with very few, if any, adverse effects. However, what degree of this beneficial activity is due to placebo effects is yet to be determined. In addition, the precise mechanism of action of saw palmetto in men with BPH remains unclear.

New piezoelectric materials for SAW filters

Science.gov (United States)

Anghelescu, Adrian; Nedelcu, Monica

2010-11-01

Scientific research of surface acoustic wave (SAW) devices had an early start by the end of 1960s and led to the development of high frequency and small size piezo devices. A sustained effort was dedicated for these components to be transformed into many more interesting applications for telecom market. Recently the employment of new piezo materials and crystallographic orientations open new opportunities for SAW filters. New piezoelectric crystals of gallium orthophosphate (GaPO4) provide higher electromechanical coupling than quartz, while maintaining temperature compensated characteristics similar to quartz. Based on this material phase transition of 970°C, development of new piezo devices to operate at higher temperatures up to 800°C can be done. SAW velocities about 30% lower than ST-X quartz, favors smaller and more compact devices. Other advantages of GaPO4 are: stability with high resistance to stress induced twinning, 3~4 times higher electromechanical coupling than quartz and existence of SAW temperature compensated orientations. Another family of new materials of the trigonal 32 class has received much attention recently because of their temperature behavior similar to quartz and the promise of higher electromechanical coupling coefficients. It is the family of langasite (LGS, La3Ga5SiO14), langatate (LGT, La3Ga5.5Ta0.5O14) and langanite (La3Ga5.5Nb0.5O14). Langasite crystals, easier to obtain and with the value of electromechanical coupling coefficient intermediate between quartz and lithium tantalate (k2=0.32% for 0°, 140°, 22.5° orientation and k2=0.38% for 0°, 140°, 25° orientation), enable us to design SAW filters with a relative pass band of 0.3% to 0.85%. Other piezoelectric materials are reviewed for comparison.

Response of Saw Palmetto to Three Herbicides

Science.gov (United States)

J.L. Michael; D.G. Neary

1985-01-01

Saw palmetto [Serona repens (Bartram) Small] can be controlled with herbicides. Garion® 4E1/2 and Brush Killer® 800 were evaluated for effectiveness againest saw palmetto when they were applied at three rates in April, June, and August. Oust® was tested at three rates in April only. Herbicides were not effective with April...

Fire extinguishing strength of the combustion product of wood saw ...

African Journals Online (AJOL)

Forty saw dust samples from four mature hard wood plants grown in southwestern part of Nigeria were analyzed for their ash contents, moisture contents, metallic contents and hence the fire extinguishing strength of the saw dust ash by classical and instrumental methods of analyses. Mahogany (Khaya ivorensis) wood saw ...

Experimental study on manufacturing of grits-spiral- distribution electroplated wire saw

Directory of Open Access Journals (Sweden)

Yufei GAO

2016-12-01

Full Text Available In order to obtain high performance electroplating diamond wire saw, experimental studies are conducted for development of grits-spiral-distribution electroplated diamond wire saw using sand-suspend electroplating method. The influences of pre-plating cathode current density, grits electro-embedding cathode current density and time on composite deposite coating appearance and grits distribution of wire saw are analyzed, and the sawing experiment is carried out by using the trial wire saw. The results show that good bonding strength between the coating and the steel wire can be obtained when the adopted cathode current density is 5.0 A/dm2 at pre-plating stage; good coating and girts distribution can be obtained when the adopted cathode current density is 5.0 A/dm2 and the electroplating time is 7~8 min at grits electro-embedding stage. By winding insulation wire on the surface of steel wire and reasonably selecting technological parameters before pre-plating can make the diamond wire saw with grits-spiral-distribution on surface, and the new type of wire saw has a better crumbs-clearing effect in wire sawing process.

Acute pancreatitis with saw palmetto use: a case report

OpenAIRE

Bruminhent, Jackrapong; Carrera, Perliveh; Li, Zhongzhen; Amankona, Raymond; Roberts, Ingram M

2011-01-01

Abstract Introduction Saw palmetto is a phytotherapeutic agent commercially marketed for the treatment of benign prostatic hyperplasia. Evidence suggests that saw palmetto is a safe product, and mild gastrointestinal adverse effects have been reported with its use. We report a case of acute pancreatitis, possibly secondary to the use of saw palmetto. Case presentation A 61-year-old Caucasian man with a history of benign prostatic hyperplasia and gastroesophageal reflux disease developed epiga...

A detailed safety assessment of a saw palmetto extract.

Science.gov (United States)

Avins, Andrew L; Bent, Stephen; Staccone, Suzanne; Badua, Evelyn; Padula, Amy; Goldberg, Harley; Neuhaus, John; Hudes, Esther; Shinohara, Katusto; Kane, Christopher

2008-06-01

Saw palmetto is commonly used by men for lower-urinary tract symptoms. Despite its widespread use, very little is known about the potential toxicity of this dietary supplement. The Saw palmetto for Treatment of Enlarged Prostates (STEP) study was a randomized clinical trial performed among 225 men with moderate-to-severe symptoms of benign prostatic hyperplasia, comparing a standardized extract of the saw palmetto berry (160 mg twice daily) with a placebo over a 1-year period. As part of this study, detailed data were collected on serious and non-serious adverse events, sexual functioning, and laboratory tests of blood and urine. Between-group differences were assessed with mixed-effects regression models. There were no significant differences observed between the saw palmetto and placebo-allocated participants in the risk of suffering at least one serious adverse event (5.4% vs. 9.7%, respectively; p=0.31) or non-serious symptomatic adverse event (34.8% vs. 30.1%, p=0.48). There were few significant between-group differences in sexual functioning or for most laboratory analyses, with only small differences observed in changes over time in total bilirubin (p=0.001), potassium (p=0.03), and the incidence of glycosuria (0% in the saw palmetto group vs. 3.7% in the placebo group, p=0.05). Despite careful assessment, no evidence for serious toxicity of saw palmetto was observed in this clinical trial. Given the sample size and length of this study, however, these data do not rule out potential rare adverse effects associated with the use of saw palmetto.

Analyzing the installation angle error of a SAW torque sensor

International Nuclear Information System (INIS)

Fan, Yanping; Ji, Xiaojun; Cai, Ping

2014-01-01

When a torque is applied to a shaft, normal strain oriented at ±45° direction to the shaft axis is at its maximum, which requires two one-port SAW resonators to be bonded to the shaft at ±45° to the shaft axis. In order to make the SAW torque sensitivity high enough, the installation angle error of two SAW resonators must be confined within ±5° according to our design requirement. However, there are few studies devoted to the installation angle analysis of a SAW torque sensor presently and the angle error was usually obtained by a manual method. Hence, we propose an approximation method to analyze the angle error. First, according to the sensitive mechanism of the SAW device to torque, the SAW torque sensitivity is deduced based on the linear piezoelectric constitutive equation and the perturbation theory. Then, when a torque is applied to the tested shaft, the stress condition of two SAW resonators mounted with an angle deviating from ±45° to the shaft axis, is analyzed. The angle error is obtained by means of the torque sensitivities of two orthogonal SAW resonators. Finally, the torque measurement system is constructed and the loading and unloading experiments are performed twice. The torque sensitivities of two SAW resonators are obtained by applying average and least square method to the experimental results. Based on the derived angle error estimation function, the angle error is estimated about 3.447°, which is close to the actual angle error 2.915°. The difference between the estimated angle and the actual angle is discussed. The validity of the proposed angle error analysis method is testified to by the experimental results. (technical design note)

Software analyzes feasibility of saw kerf reduction for hardwood mills

Science.gov (United States)

Philip H. Steele

2005-01-01

Reductions in saw kerf on head rigs and resaws can dramatically increase lumber recovery in hardwood sawmills. Research has shown that lumber sawing variation reduction will increase lumber recovery above that obtained solely from kerf reduction. Reductions in sawing machine kerf or variation always come at some cost in both capital and variable costs. Determining...

Modeling, simulation, and design of SAW grating filters

Science.gov (United States)

Schwelb, Otto; Adler, E. L.; Slaboszewicz, J. K.

1990-05-01

A systematic procedure for modeling, simulating, and designing SAW (surface acoustic wave) grating filters, taking losses into account, is described. Grating structures and IDTs (interdigital transducers) coupling to SAWs are defined by cascadable transmission-matrix building blocks. Driving point and transfer characteristics (immittances) of complex architectures consisting of gratings, transducers, and coupling networks are obtained by chain-multiplying building-block matrices. This modular approach to resonator filter analysis and design combines the elements of lossy filter synthesis with the transmission-matrix description of SAW components. A multipole filter design procedure based on a lumped-element-model approximation of one-pole two-port resonator building blocks is given and the range of validity of this model examined. The software for simulating the performance of SAW grating devices based on this matrix approach is described, and its performance, when linked to the design procedure to form a CAD/CAA (computer-aided design and analysis) multiple-filter design package, is illustrated with a resonator filter design example.

Saw palmetto for benign prostatic hyperplasia.

Science.gov (United States)

Bent, Stephen; Kane, Christopher; Shinohara, Katsuto; Neuhaus, John; Hudes, Esther S; Goldberg, Harley; Avins, Andrew L

2006-02-09

Saw palmetto is used by over 2 million men in the United States for the treatment of benign prostatic hyperplasia and is commonly recommended as an alternative to drugs approved by the Food and Drug Administration. In this double-blind trial, we randomly assigned 225 men over the age of 49 years who had moderate-to-severe symptoms of benign prostatic hyperplasia to one year of treatment with saw palmetto extract (160 mg twice a day) or placebo. The primary outcome measures were changes in the scores on the American Urological Association Symptom Index (AUASI) and the maximal urinary flow rate. Secondary outcome measures included changes in prostate size, residual urinary volume after voiding, quality of life, laboratory values, and the rate of reported adverse effects. There was no significant difference between the saw palmetto and placebo groups in the change in AUASI scores (mean difference, 0.04 point; 95 percent confidence interval, -0.93 to 1.01), maximal urinary flow rate (mean difference, 0.43 ml per minute; 95 percent confidence interval, -0.52 to 1.38), prostate size, residual volume after voiding, quality of life, or serum prostate-specific antigen levels during the one-year study. The incidence of side effects was similar in the two groups. In this study, saw palmetto did not improve symptoms or objective measures of benign prostatic hyperplasia. (ClinicalTrials.gov number, NCT00037154.). Copyright 2006 Massachusetts Medical Society.

Characterization of a human coagulation factor Xa-binding site on Viperidae snake venom phospholipases A2 by affinity binding studies and molecular bioinformatics

Directory of Open Access Journals (Sweden)

Gowda Veerabasappa T

2007-12-01

Full Text Available Abstract Background The snake venom group IIA secreted phospholipases A2 (SVPLA2, present in the Viperidae snake family exhibit a wide range of toxic and pharmacological effects. They exert their different functions by catalyzing the hydrolysis of phospholipids (PL at the membrane/water interface and by highly specific direct binding to: (i presynaptic membrane-bound or intracellular receptors; (ii natural PLA2-inhibitors from snake serum; and (iii coagulation factors present in human blood. Results Using surface plasmon resonance (SPR protein-protein interaction measurements and an in vitro biological test of inhibition of prothrombinase activity, we identify a number of Viperidae venom SVPLA2s that inhibit blood coagulation through direct binding to human blood coagulation factor Xa (FXa via a non-catalytic, PL-independent mechanism. We classify the SVPLA2s in four groups, depending on the strength of their binding. Molecular electrostatic potentials calculated at the surface of 3D homology-modeling models show a correlation with inhibition of prothrombinase activity. In addition, molecular docking simulations between SVPLA2 and FXa guided by the experimental data identify the potential FXa binding site on the SVPLA2s. This site is composed of the following regions: helices A and B, the Ca2+ loop, the helix C-β-wing loop, and the C-terminal fragment. Some of the SVPLA2 binding site residues belong also to the interfacial binding site (IBS. The interface in FXa involves both, the light and heavy chains. Conclusion We have experimentally identified several strong FXa-binding SVPLA2s that disrupt the function of the coagulation cascade by interacting with FXa by the non-catalytic PL-independent mechanism. By theoretical methods we mapped the interaction sites on both, the SVPLA2s and FXa. Our findings may lead to the design of novel, non-competitive FXa inhibitors.

Pharmacokinetic behavior of enrofloxacin and its metabolite ciprofloxacin in urutu pit vipers (Bothrops alternatus) after intramuscular administration.

Science.gov (United States)

Waxman, Samanta; Prados, Ana Paula; de Lucas, José Julio; San Andrés, Manuel Ignacion; Regner, Pablo; de Oliveira, Vanesa Costa; de Roodt, Adolfo; Rodríguez, Casilda

2014-03-01

Enrofloxacin is widely used in veterinary medicine and is an important alternative to treating bacterial infections, which play an important role as causes of disease and death in captive snakes. Its extralabel use in nontraditional species has been related to its excellent pharmacokinetic and antimicrobial characteristics. This can be demonstrated by its activity against gram-negative organisms implicated in serious infectious diseases of reptile species with a rapid and concentration-dependent bactericidal effect and a large volume of distribution. Pharmacokinetic parameters for enrofloxacin were investigated in seven urutu pit vipers (Bothrops alternatus), following intramuscular injections of 10 mg/kg. The plasma concentrations of enrofloxacin and its metabolite, ciprofloxacin, were measured using high-performance liquid chromatography. Blood samples were collected from the ventral coccygeal veins at 0.5, 1, 2, 4, 8, 12, 24, 36, 48, 72, 96, 108, and 168 hr. The kinetic behavior was characterized by a relatively slow absorption (time of maximal plasma concentration = 4.50 +/- 3.45 hr) with peak plasma concentration of 4.81 +/- 1.12 microg/ml. The long half-life during the terminal elimination phase (t1/2 lambda = 27.91 +/- 7.55 hr) of enrofloxacin after intramuscular administration, calculated in the present study, could suggest that the antibiotic is eliminated relatively slowly and/or the presence of a slow absorption in urutu pit vipers. Ciprofloxacin reached a peak plasma concentration of 0.35 microg/ml at 13.45 hr, and the fraction of enrofloxacin metabolized to ciprofloxacin was 13.06%. If enrofloxacin's minimum inhibitory concentration (MIC90) values of 0.5 microg/ml were used, the ratios AUC(e+c): MIC90 (276 +/- 67 hr) and Cmax(e+c): MIC90 (10 +/- 2) reach the proposed threshold values (125 hr and 10, respectively) for optimized efficacy and minimized resistance development when treating infections caused by Pseudomonas. The administration of 10 mg/kg of

Fatty Acid and Phytosterol Content of Commercial Saw Palmetto Supplements

Directory of Open Access Journals (Sweden)

Brian L. Lindshield

2013-09-01

Full Text Available Saw palmetto supplements are one of the most commonly consumed supplements by men with prostate cancer and/or benign prostatic hyperplasia (BPH. Some studies have found significant improvements in BPH and lower urinary tract symptoms (LUTS with saw palmetto supplementation, whereas others found no benefits. The variation in the efficacy in these trials may be a result of differences in the putative active components, fatty acids and phytosterols, of the saw palmetto supplements. To this end, we quantified the major fatty acids (laurate, myristate, palmitate, stearate, oleate, linoleate and phytosterols (campesterol, stigmasterol, β-sitosterol in 20 commercially available saw palmetto supplements using GC-FID and GC-MS, respectively. Samples were classified into liquids, powders, dried berries, and tinctures. Liquid saw palmetto supplements contained significantly higher (p < 0.05 concentrations of total fatty acids (908.5 mg/g, individual fatty acids, total phytosterols (2.04 mg/g, and individual phytosterols, than the other supplement categories. Powders contained significantly higher (p < 0.05 concentrations of total fatty acids than tinctures, which contain negligible amounts of fatty acids (46.3 mg/g and phytosterols (0.10 mg/g. Our findings suggest that liquid saw palmetto supplements may be the best choice for individuals who want to take a saw palmetto supplement with the highest concentrations of both fatty acids and phytosterols.

Development of cutting techniques of steel pipe by wire sawing

International Nuclear Information System (INIS)

Kamiyama, Yoshinori; Inai, Shinsuke

2004-01-01

A cutting method has a high cutting efficiency and enable cutting in safe. A wire saw cutting method is used for dismantling of massive concrete structures such as nuclear power plants with an effective and safe mean. In the case of dismantling of structures with multiple pipes installed at these facilities, an effective method is also demanded. If a wire saw method to remotely cut target objects in a large block in bulk is applicable, it will be expected an effective dismantling work under severe conditions with radioactivity. Although the wire saw method has adaptability for any shapes of cutting target objects and is widely adopted in dismantling of concrete constructs, it has few actual achievements in dismantling of steel structures such as steel pipe bundle. This study aims to verify its cutting characteristics and adaptability as a cutting method by conducting a cutting basic test to develop a diamond wire saw method to efficiently cut constructs with multiple pipes in a bundle. The test proved that a wire saw cutting method apply to dismantle structures with steel pipe bundle. A wire saw for metal cutting is adaptable in dismantling of bundle of thick carbon steel and stainless steel pipes. And also a wire saw for concrete cutting is adaptable in dismantling of pipe bundle structure with a mortar. (author)

Band Saw Blade Crack before and after Comparison and Analysis of Experiments (2

Directory of Open Access Journals (Sweden)

Gao Jin-gui

2016-01-01

Full Text Available Based on MJ3310 woodworking band saw machine as the research object, under the no-load and load of Vib system vibration signal acquisition, processing and analysis software of band saw blade transverse vibration test and the signal acquisition and analysis of the collected signals obtained: to determine the transverse vibration displacement 5.66μm ~ 7.86μm and the main vibration frequency between 624 Hz ~ 792 Hz, then saw blade crack at least 3 mm, need timely saw blade, cutting high hardness of wood band saw blade transverse vibration displacement and frequency will increase sharply. Can be generated according to the band saw blade crack before and after the changing rule of the horizontal vibration displacement and frequency of transverse vibration and scope, judgment and replacement time of saw blade saw blade defect types, which can fully rational utilization of saw blade work effectively.

Quantitative Proteomic Analysis of Venoms from Russian Vipers of Pelias Group: Phospholipases A₂ are the Main Venom Components.

Science.gov (United States)

Kovalchuk, Sergey I; Ziganshin, Rustam H; Starkov, Vladislav G; Tsetlin, Victor I; Utkin, Yuri N

2016-04-12

Venoms of most Russian viper species are poorly characterized. Here, by quantitative chromato-mass-spectrometry, we analyzed protein and peptide compositions of venoms from four Vipera species (V. kaznakovi, V. renardi, V. orlovi and V. nikolskii) inhabiting different regions of Russia. In all these species, the main components were phospholipases A₂, their content ranging from 24% in V. orlovi to 65% in V. nikolskii. Altogether, enzyme content in venom of V. nikolskii reached ~85%. Among the non-enzymatic proteins, the most abundant were disintegrins (14%) in the V. renardi venom, C-type lectin like (12.5%) in V. kaznakovi, cysteine-rich venom proteins (12%) in V. orlovi and venom endothelial growth factors (8%) in V. nikolskii. In total, 210 proteins and 512 endogenous peptides were identified in the four viper venoms. They represented 14 snake venom protein families, most of which were found in the venoms of Vipera snakes previously. However, phospholipase B and nucleotide degrading enzymes were reported here for the first time. Compositions of V. kaznakovi and V. orlovi venoms were described for the first time and showed the greatest similarity among the four venoms studied, which probably reflected close relationship between these species within the "kaznakovi" complex.

Surface-acoustic-wave (SAW) flow sensor

Science.gov (United States)

Joshi, Shrinivas G.

1991-03-01

The use of a surface-acoustic-wave (SAW) device to measure the rate of gas flow is described. A SAW oscillator heated to a suitable temperature above ambient is placed in the path of a flowing gas. Convective cooling caused by the gas flow results in a change in the oscillator frequency. A 73-MHz oscillator fabricated on 128 deg rotated Y-cut lithium niobate substrate and heated to 55 C above ambient shows a frequency variation greater than 142 kHz for flow-rate variation from 0 to 1000 cu cm/min. The output of the sensor can be calibrated to provide a measurement of volume flow rate, pressure differential across channel ports, or mass flow rate. High sensitivity, wide dynamic range, and direct digital output are among the attractive features of this sensor. Theoretical expressions for the sensitivity and response time of the sensor are derived. It is shown that by using ultrasonic Lamb waves propagating in thin membranes, a flow sensor with faster response than a SAW sensor can be realized.

Alexander Mikhailovich Zakharov and his works on the venom apparatus and venoms of some poisonous snakes

Directory of Open Access Journals (Sweden)

Cherlin Vladimir Alexandrovich

2013-10-01

Full Text Available The article gives brief biographical information about a very talented herpetologist Alexander M. Zakharov, and describes the general results of his works on the structure and function of venom glands of some poisonous snakes and their venoms. In his studies, he got the results, which are fundamentally different from the conventional concept of 30s - 70s of the XX century. Unfortunately, among physicians this concept has not changed up today. At that time it was thought that the poisons of Viperidae snakes are almost completely hemotoxic, and poisons of Elapidae (cobra are almost neurotoxic. But A.M.Zaharov found out, that poisons of both types of snakes (Viperidae and Elapidae include three groups of substances: hemotoxins, neurotoxins and non-toxic component – hyaluronidase. Each of these groups of substances is produced by independent part of venom glands and has its own special effect. Neurotoxins act on the central nervous system (mainly the respiratory center, but are greatly destroyed by means of the blood antigen properties and cannot pass through the hematoencephalic barrier. Hyaluronidase , connecting with neurotoxins, has an important property – to "smuggle" neurotoxins through the hematoencephalic barrier exactly into the target organ – the respiratory center in the central nervous system. In this case, neurotoxin enters the respiratory center not through the blood and lymph vessels, but directly through the nerve channel, through synapsis. The main function of hemotoxins is not to kill the victim, but to protect neurotoxins and hyaluronidase from the destructive activity of the victim's blood. Therefore, the target of the poisons of Viperidae and Elapidae snakes is the central nervous system of victims, but Elapidae has almost no hemotoxins. That’s why their striking effect can be achieved only by a strong increase in the amount of neurotoxins and hyaluronidase. Hemotoxins of Viperidae venoms permits to reduce the amount of

SAW Humidity Sensor Sensitivity Enhancement via Electrospraying of Silver Nanowires

Directory of Open Access Journals (Sweden)

Farid Sayar Irani

2016-11-01

Full Text Available In this research, we investigated the influence of the surface coatings of silver nanowires on the sensitivity of surface acoustic wave (SAW humidity sensors. Silver nanowires, with poly(vinylpyrrolidone (PVP, which is a hydrophilic capping agent, were chemically synthesized, with an average length of 15 µm and an average diameter of 60 nm. Humidity sensors, with 433 MHz frequency dual-port resonator Rayleigh-SAW devices, were coated by silver nanowires (AgNWs using the electrospray coating method. It was demonstrated that increasing thickness of coated AgNW on the surfaces of SAW devices results in increased sensitivity. The highest frequency shift (262 kHz in these SAW devices was obtained with an injection of 0.5 mL of the AgNW solution with a concentration of 0.5 mg/mL at an injection rate of 1 mL/h. It also showed the highest humidity sensitivity among the other prepared SAW devices.

Estimation of Power Consumption in the Circular Sawing of Stone Based on Tangential Force Distribution

Science.gov (United States)

Huang, Guoqin; Zhang, Meiqin; Huang, Hui; Guo, Hua; Xu, Xipeng

2018-04-01

Circular sawing is an important method for the processing of natural stone. The ability to predict sawing power is important in the optimisation, monitoring and control of the sawing process. In this paper, a predictive model (PFD) of sawing power, which is based on the tangential force distribution at the sawing contact zone, was proposed, experimentally validated and modified. With regard to the influence of sawing speed on tangential force distribution, the modified PFD (MPFD) performed with high predictive accuracy across a wide range of sawing parameters, including sawing speed. The mean maximum absolute error rate was within 6.78%, and the maximum absolute error rate was within 11.7%. The practicability of predicting sawing power by the MPFD with few initial experimental samples was proved in case studies. On the premise of high sample measurement accuracy, only two samples are required for a fixed sawing speed. The feasibility of applying the MPFD to optimise sawing parameters while lowering the energy consumption of the sawing system was validated. The case study shows that energy use was reduced 28% by optimising the sawing parameters. The MPFD model can be used to predict sawing power, optimise sawing parameters and control energy.

Metal segmenting using abrasive and reciprocating saws

International Nuclear Information System (INIS)

Allen, R.P.; Fetrow, L.K.; Haun, F.E. Jr.

1987-06-01

This paper evaluates a light-weight, high-power abrasive saw for segmenting radioactively contaminated metal components. A unique application of a reciprocating mechanical saw for the remote disassembly of equipment in a hot cell also is described. The results of this work suggest that use of these techniques for selected remote sectioning applications could minimize operational and access problems and be very cost effective in comparison with other inherently faster sectioning methods. 2 refs., 7 figs

Analysis of acoustic reflectors for SAW temperature sensor and wireless measurement of temperature

International Nuclear Information System (INIS)

Kim, Ki Bok; Kim, Seong Hoon; Jeong, Jae Kee; Shin, Beom Soo

2013-01-01

In this study, a wireless and non power SAW (surface acoustic wave) temperature sensor was developed. The single inter digital transducer (IDT) of SAW temperature sensor of which resonance frequency is 434 MHz was fabricated on 128.deg rot-X LiNbO 3 piezoelectric substrate by semiconductor processing technology. To find optimal acoustic reflector for SAW temperature sensor, various kinds of acoustic reflectors were fabricated and their reflection characteristics were analyzed. The IDT type acoustic reflector showed better reflection characteristic than other reflectors. The wireless temperature sensing system consisting of SAW temperature sensor with dipole antenna and a microprocessor based control circuit with dipole antenna for transmitting signal to activate the SAW temperature sensor and receiving the signal from SAW temperature sensor was developed. The result with wireless SAW temperature sensing system showed that the frequency of SAW temperature sensor was linearly decreased with the increase of temperature in the range of 40 to 80.deg.C and the developed wireless SAW temperature sensing system showed the excellent performance with the coefficient of determination of 0.99

Grip for sawing round timber

Energy Technology Data Exchange (ETDEWEB)

1982-07-01

This paper describes a device development at Gedling Colliery, Nottinghamshire Area, United Kingdom. It is a gripping attachment, designed to overcome the safety hazards involved in cross cutting timbers with a circular saw.

High resolution SAW elastography for ex-vivo porcine skin specimen

Science.gov (United States)

Zhou, Kanheng; Feng, Kairui; Wang, Mingkai; Jamera, Tanatswa; Li, Chunhui; Huang, Zhihong

2018-02-01

Surface acoustic wave (SAW) elastography has been proven to be a non-invasive, non-destructive method for accurately characterizing tissue elastic properties. Current SAW elastography technique tracks generated surface acoustic wave impulse point by point which are a few millimeters away. Thus, reconstructed elastography has low lateral resolution. To improve the lateral resolution of current SAW elastography, a new method was proposed in this research. A M-B scan mode, high spatial resolution phase sensitive optical coherence tomography (PhS-OCT) system was employed to track the ultrasonically induced SAW impulse. Ex-vivo porcine skin specimen was tested using this proposed method. A 2D fast Fourier transform based algorithm was applied to process the acquired data for estimating the surface acoustic wave dispersion curve and its corresponding penetration depth. Then, the ex-vivo porcine skin elastogram was established by relating the surface acoustic wave dispersion curve and its corresponding penetration depth. The result from the proposed method shows higher lateral resolution than that from current SAW elastography technique, and the approximated skin elastogram could also distinguish the different layers in the skin specimen, i.e. epidermis, dermis and fat layer. This proposed SAW elastography technique may have a large potential to be widely applied in clinical use for skin disease diagnosis and treatment monitoring.

DNA barcode authentication of saw palmetto herbal dietary supplements.

Science.gov (United States)

Little, Damon P; Jeanson, Marc L

2013-12-17

Herbal dietary supplements made from saw palmetto (Serenoa repens; Arecaceae) fruit are commonly consumed to ameliorate benign prostate hyperplasia. A novel DNA mini-barcode assay to accurately identify [specificity = 1.00 (95% confidence interval = 0.74-1.00); sensitivity = 1.00 (95% confidence interval = 0.66-1.00); n = 31] saw palmetto dietary supplements was designed from a DNA barcode reference library created for this purpose. The mini-barcodes were used to estimate the frequency of mislabeled saw palmetto herbal dietary supplements on the market in the United States of America. Of the 37 supplements examined, amplifiable DNA could be extracted from 34 (92%). Mini-barcode analysis of these supplements demonstrated that 29 (85%) contain saw palmetto and that 2 (6%) supplements contain related species that cannot be legally sold as herbal dietary supplements in the United States of America. The identity of 3 (9%) supplements could not be conclusively determined.

The VIMOS Public Extragalactic Redshift Survey (VIPERS). Gravity test from the combination of redshift-space distortions and galaxy-galaxy lensing at 0.5 < z < 1.2

Science.gov (United States)

de la Torre, S.; Jullo, E.; Giocoli, C.; Pezzotta, A.; Bel, J.; Granett, B. R.; Guzzo, L.; Garilli, B.; Scodeggio, M.; Bolzonella, M.; Abbas, U.; Adami, C.; Bottini, D.; Cappi, A.; Cucciati, O.; Davidzon, I.; Franzetti, P.; Fritz, A.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marulli, F.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Arnouts, S.; Branchini, E.; Coupon, J.; De Lucia, G.; Ilbert, O.; Moutard, T.; Moscardini, L.; Peacock, J. A.; Metcalf, R. B.; Prada, F.; Yepes, G.

2017-12-01

We carry out a joint analysis of redshift-space distortions and galaxy-galaxy lensing, with the aim of measuring the growth rate of structure; this is a key quantity for understanding the nature of gravity on cosmological scales and late-time cosmic acceleration. We make use of the final VIPERS redshift survey dataset, which maps a portion of the Universe at a redshift of z ≃ 0.8, and the lensing data from the CFHTLenS survey over the same area of the sky. We build a consistent theoretical model that combines non-linear galaxy biasing and redshift-space distortion models, and confront it with observations. The two probes are combined in a Bayesian maximum likelihood analysis to determine the growth rate of structure at two redshifts z = 0.6 and z = 0.86. We obtain measurements of fσ8(0.6) = 0.48 ± 0.12 and fσ8(0.86) = 0.48 ± 0.10. The additional galaxy-galaxy lensing constraint alleviates galaxy bias and σ8 degeneracies, providing direct measurements of f and σ8: [f(0.6),σ8(0.6)] = [0.93 ± 0.22,0.52 ± 0.06] and [f(0.86),σ8(0.86)] = [0.99 ± 0.19,0.48 ± 0.04]. These measurements are statistically consistent with a Universe where the gravitational interactions can be described by General Relativity, although they are not yet accurate enough to rule out some commonly considered alternatives. Finally, as a complementary test we measure the gravitational slip parameter, EG, for the first time at z > 0.6. We find values of E̅G(0.6) = 0.16±0.09 and E̅G(0.86) = 0.09±0.07, when EG is averaged over scales above 3 h-1 Mpc. We find that our EG measurements exhibit slightly lower values than expected for standard relativistic gravity in a ΛCDM background, although the results are consistent within 1-2σ. Based on observations collected at the European Southern Observatory, Cerro Paranal, Chile, using the Very Large Telescope under programmes 182.A-0886 and partly 070.A-9007. Also based on observations obtained with MegaPrime/MegaCam, a joint project of CFHT

Mixed Modeling of a SAW Delay Line Using VHDL-AMS

Science.gov (United States)

Wilson, William C.; Atkinson, Gary M.

2006-01-01

To aid in the development of SAW sensors for aerospace applications we have created a model of a SAW Delay line using VHDL. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. The model includes optimization for the number of finger pairs in the IDTs and for the aperture height. This paper presents the model and the results from the model for a SAW delay line design.

Quantitative assessment of protein activity in orphan tissues and single cells using the metaVIPER algorithm. | Office of Cancer Genomics

Science.gov (United States)

We and others have shown that transition and maintenance of biological states is controlled by master regulator proteins, which can be inferred by interrogating tissue-specific regulatory models (interactomes) with transcriptional signatures, using the VIPER algorithm. Yet, some tissues may lack molecular profiles necessary for interactome inference (orphan tissues), or, as for single cells isolated from heterogeneous samples, their tissue context may be undetermined.

One-port portable SAW sensor system

Science.gov (United States)

Hoa Nguyen, Vu; Peters, Oliver; Schnakenberg, Uwe

2018-01-01

A portable device using the SAW-based impedance sensor type based on one interdigital transducer simultaneously as SAW generator and sensor element (1-port approach) is introduced. As a novelty, the so far required expensive vector network analyzer (VNA) is replaced by a hand-held device to measure the impedance spectrum of the SAW sensor by RF-gain-phase meters. Hence, some of the best features from the conventional oscillator and VNA approaches are combined to develop a low-cost and self-contained measurement system, including signal in- and output ability for real-time measurements. The pivotal aspect of the portable system is the transfer of the sophisticated high frequency approach into a quasi-static one. This enables the use of simple lumped electronics without the need of impedance matching circuits. Proof-of-concept was carried out by measuring conductivities of phosphate-buffered solutions and viscosities of glycerin. Sensitivities for temperature of 0.3%/°C, viscosity of 10.1% (mPa s)-1 and conductivity of 0.5% (S cm)-1 have been determined, respectively, which are competitive results compared to the benchmark approaches.

Effects of AlN Coating Layer on High Temperature Characteristics of Langasite SAW Sensors

Directory of Open Access Journals (Sweden)

Lin Shu

2016-09-01

Full Text Available High temperature characteristics of langasite surface acoustic wave (SAW devices coated with an AlN thin film have been investigated in this work. The AlN films were deposited on the prepared SAW devices by mid-frequency magnetron sputtering. The SAW devices coated with AlN films were measured from room temperature to 600 °C. The results show that the SAW devices can work up to 600 °C. The AlN coating layer can protect and improve the performance of the SAW devices at high temperature. The SAW velocity increases with increasing AlN coating layer thickness. The temperature coefficients of frequency (TCF of the prepared SAW devices decrease with increasing thickness of AlN coating layers, while the electromechanical coupling coefficient (K2 of the SAW devices increases with increasing AlN film thickness. The K2 of the SAW devices increases by about 20% from room temperature to 600 °C. The results suggest that AlN coating layer can not only protect the SAW devices from environmental contamination, but also improve the K2 of the SAW devices.

Fatty Acid and Phytosterol Content of Commercial Saw Palmetto Supplements

OpenAIRE

Penugonda, Kavitha; Lindshield, Brian L.

2013-01-01

Saw palmetto supplements are one of the most commonly consumed supplements by men with prostate cancer and/or benign prostatic hyperplasia (BPH). Some studies have found significant improvements in BPH and lower urinary tract symptoms (LUTS) with saw palmetto supplementation, whereas others found no benefits. The variation in the efficacy in these trials may be a result of differences in the putative active components, fatty acids and phytosterols, of the saw palmetto supplements. To this end...

A high sensitivity nanomaterial based SAW humidity sensor

Energy Technology Data Exchange (ETDEWEB)

Wu, T-T; Chou, T-H [Institute of Applied Mechanics, National Taiwan University, Taipei 106, Taiwan (China); Chen, Y-Y [Department of Mechanical Engineering, Tatung University, Taipei 104, Taiwan (China)], E-mail: wutt@ndt.iam.ntu.edu.tw

2008-04-21

In this paper, a highly sensitive humidity sensor is reported. The humidity sensor is configured by a 128{sup 0}YX-LiNbO{sub 3} based surface acoustic wave (SAW) resonator whose operating frequency is at 145 MHz. A dual delay line configuration is realized to eliminate external temperature fluctuations. Moreover, for nanostructured materials possessing high surface-to-volume ratio, large penetration depth and fast charge diffusion rate, camphor sulfonic acid doped polyaniline (PANI) nanofibres are synthesized by the interfacial polymerization method and further deposited on the SAW resonator as selective coating to enhance sensitivity. The humidity sensor is used to measure various relative humidities in the range 5-90% at room temperature. Results show that the PANI nanofibre based SAW humidity sensor exhibits excellent sensitivity and short-term repeatability.

Biological and immunological characteristics of the poison of Bothrops cotiara (Serpentes: Viperidae)

International Nuclear Information System (INIS)

Roodt, Adolfo Rafael de; Dolab, Jorge Adrian; Manzanelli, Marcelo Victor; Pineiro, Nicolas; Estevez, Judith; Paniagua, Jorge Francisco; Urs Vogt, Alejandro

2006-01-01

Bothrops cotiara is a venomous snake sporadically found in the province of Misiones in Argentina, South of Brazil and Paraguay. Data on the clinics of the poisoning produced by its bite and on its venom are scarce. There is no information on the neutralizing capacity of the antivenoms available. In this study, the lethal potency, hemorrhagic, necrotizing, coagulant and thrombin-like, defibrinogenasing, indirect hemolytic and fibrinolytic activities of the venom of B. cotiara specimens from the province of Misiones were determined. The toxic activities were within the range of those described for the other Bothrops species from Argentina, and the electrophoretic and chromatographic studies showed similarities with those described for the other bothropic venoms. The immunochemical reactivity of six South American anti Viper antivenoms (ELISA) have a strong reactivity with all the antivenoms studied. The neutralizing capacity of three of these therapeutic antivenoms against the lethal potency and hemorrhagic, necrotizing, coagulant, thrombin-like and hemolytic activities showed a very close neutralizing capacity. Our data strongly suggest that the antivenoms for therapeutic use available in this area of South America are useful to neutralize the toxic and enzymatic activities of the venom of this uncommon specie of Bothrops. (author) [es

Antibacterial activity of different types of snake venom from the Viperidae family against Staphylococcus aureus

Directory of Open Access Journals (Sweden)

Isabela Nascimento Canhas

2017-09-01

Full Text Available Toxins and venoms produced by living organisms have exhibited a variety of biological activities against microorganisms. In this study, we tested seven snake venoms from the family Viperidae for antibacterial activity and the activities of reversal of antibiotic resistance and inhibition of biofilm formation against 22 clinical isolates of Staphylococcus aureus. Bothrops moojeni venom exhibited anti staphylococcal activity with the lowest mean value of minimum inhibitory concentration (MIC. Moreover, reversal of antibiotic resistance was observed for combinations of B. moojeni venom (½ x MIC and norfloxacin or ampicillin (both ½ x MIC for 86.4% and 50% of the isolates, respectively. B. moojeni venom alone at ½ MIC inhibited 90% of biofilm formation, whereas in combination with ciprofloxacin, both at ½ MIC, a reduction on the NorA efflux pump activity was observed. The detection of in vitro mutants colonies of S. aureus resistant to B. moojeni venom was low and they did not survive. A phospholipase A2 was purified from the venom of B. moojeni and displayed anti-staphylococcal activity when tested alone or in combination with ciprofloxacin. The results presented here will contribute to the search for new antimicrobial agents against resistant S. aureus.

Venoms of South Asian hump-nosed pit vipers (Genus: Hypnale cause muscarinic effects in BALB/c mice

Directory of Open Access Journals (Sweden)

A Silva

2014-03-01

Full Text Available Although clinical, in-vivo and in-vitro studies suggest the necrotic, haemorrhagic, pro-coagulant and nephrotoxic effects of South Asian Hump nosed pit vipers, reports on neurotoxic properties are limited to a single in-vitro study. Using BALB/c mice, for the first time, here we demonstrate the signs of envenoming suggestive of possible muscarinic effects of the venoms of all three Hypnale species. Further, we demonstrate that the muscarinic effects are occurred at lower venom doses by H. hypnale venom, compared to H. nepa and H. zara.

Laser-based gluing of diamond-tipped saw blades

Science.gov (United States)

Hennigs, Christian; Lahdo, Rabi; Springer, André; Kaierle, Stefan; Hustedt, Michael; Brand, Helmut; Wloka, Richard; Zobel, Frank; Dültgen, Peter

2016-03-01

To process natural stone such as marble or granite, saw blades equipped with wear-resistant diamond grinding segments are used, typically joined to the blade by brazing. In case of damage or wear, they must be exchanged. Due to the large energy input during thermal loosening and subsequent brazing, the repair causes extended heat-affected zones with serious microstructure changes, resulting in shape distortions and disadvantageous stress distributions. Consequently, axial run-out deviations and cutting losses increase. In this work, a new near-infrared laser-based process chain is presented to overcome the deficits of conventional brazing-based repair of diamond-tipped steel saw blades. Thus, additional tensioning and straightening steps can be avoided. The process chain starts with thermal debonding of the worn grinding segments, using a continuous-wave laser to heat the segments gently and to exceed the adhesive's decomposition temperature. Afterwards, short-pulsed laser radiation removes remaining adhesive from the blade in order to achieve clean joining surfaces. The third step is roughening and activation of the joining surfaces, again using short-pulsed laser radiation. Finally, the grinding segments are glued onto the blade with a defined adhesive layer, using continuous-wave laser radiation. Here, the adhesive is heated to its curing temperature by irradiating the respective grinding segment, ensuring minimal thermal influence on the blade. For demonstration, a prototype unit was constructed to perform the different steps of the process chain on-site at the saw-blade user's facilities. This unit was used to re-equip a saw blade with a complete set of grinding segments. This saw blade was used successfully to cut different materials, amongst others granite.

A4 see-saw models and form dominance

International Nuclear Information System (INIS)

Chen, M-C; King, Stephen F.

2009-01-01

We introduce the idea of Form Dominance in the (type I) see-saw mechanism, according to which a particular right-handed neutrino mass eigenstate is associated with a particular physical neutrino mass eigenstate, leading to a form diagonalizable effective neutrino mass matrix. Form Dominance, which allows an arbitrary neutrino mass spectrum, may be regarded as a generalization of Constrained Sequential Dominance which only allows strongly hierarchical neutrino masses. We consider alternative implementations of the see-saw mechanism in minimal A 4 see-saw models and show that such models satisfy Form Dominance, leading to neutrino mass sum rules which predict closely spaced neutrino masses with a normal or inverted neutrino mass ordering. To avoid the partial cancellations inherent in such models we propose Natural Form Dominance, in which a different flavon is associated with each physical neutrino mass eigenstate.

The VIMOS Public Extragalactic Redshift Survey (VIPERS):. A quiescent formation of massive red-sequence galaxies over the past 9 Gyr

Science.gov (United States)

Fritz, A.; Scodeggio, M.; Ilbert, O.; Bolzonella, M.; Davidzon, I.; Coupon, J.; Garilli, B.; Guzzo, L.; Zamorani, G.; Abbas, U.; Adami, C.; Arnouts, S.; Bel, J.; Bottini, D.; Branchini, E.; Cappi, A.; Cucciati, O.; De Lucia, G.; de la Torre, S.; Franzetti, P.; Fumana, M.; Granett, B. R.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marulli, F.; McCracken, H. J.; Paioro, L.; Polletta, M.; Pollo, A.; Schlagenhaufer, H.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Burden, A.; Di Porto, C.; Marchetti, A.; Marinoni, C.; Mellier, Y.; Moscardini, L.; Nichol, R. C.; Peacock, J. A.; Percival, W. J.; Phleps, S.; Wolk, M.

2014-03-01

We explore the evolution of the colour-magnitude relation (CMR) and luminosity function (LF) at 0.4 contamination varies for the different methods and with redshift, but regardless of the method we measure a consistent evolution of the red-sequence (RS). Between 0.4 1011 M⊙) and expeditious RS formation over a short period of ~1.5 Gyr starting before z = 1. This is supported by the detection of ongoing SF in early-type galaxies at 0.9 Chile, using the Very Large Telescope under programs 182.A-0886 and partly 070.A-9007. Also based on observations obtained with MegaPrime/MegaCam, a joint project of CFHT and CEA/DAPNIA, at the Canada-France-Hawaii Telescope (CFHT), which is operated by the National Research Council (NRC) of Canada, the Institut National des Sciences de l'Univers of the Centre National de la Recherche Scientifique (CNRS) of France, and the University of Hawaii. This work is based in part on data products produced at TERAPIX and the Canadian Astronomy Data Centre as part of the Canada-France-Hawaii Telescope Legacy Survey, a collaborative project of NRC and CNRS. The VIPERS website is http://www.vipers.inaf.it/.Appendices are available in electronic form at http://www.aanda.org

Influence of Lumber Volume Maximization in Sawing Hardwood Sawlogs

Science.gov (United States)

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1993-01-01

The Best Opening Face (BOF) technology for volume maximization during sawing has been rapidly adopted by softwood sawmills. Application of this technology in hardwood sawmills has been limited because of their emphasis on sawing for the highest possible grade of lumber. The reason for this emphasis is that there is a relatively large difference in price between the...

Spontaneous bimanual independence during parallel tapping and sawing

Science.gov (United States)

Baber, Chris

2017-01-01

The performance of complex polyrhythms—rhythms where the left and right hand move at different rates—is usually the province of highly trained individuals. However, studies in which hand movement is guided haptically show that even novices can perform polyrhythms with no or only brief training. In this study, we investigated whether novices are able to tap with one hand by matching different rates of a metronome while sawing with the other hand. This experiment was based on the assumption that saw movement is controlled consistently at a predictable rate without the need for paying primary attention to it. It would follow that consciously matching different stipulated metronome rates with the other hand would result in the spontaneous performance of polyrhythms. Six experimental conditions were randomised: single handed tapping and sawing as well as four bimanual conditions with expected ratios of 1:1 (performed with and without matching a metronome) as well as 3:4 and 4:3 (performed matching a metronome). Results showed that participants executed the saw movement at a consistent cycle duration of 0.44 [0.20] s to 0.51 [0.19] s across single and bimanual conditions, with no significant effect of the condition on the cycle duration (p = 0.315). Similarly, free tapping was executed at a cycle duration of 0.48 [0.22] s. In the bimanual conditions, we found that for a ratio of 4:3 (4 taps against 3 sawing cycles per measure), the observed and predicted ratio of 0.75 were not significantly different (p = 0.369), supporting our hypothesis of the spontaneous adoption of polyrhythms. However, for a ratio of 3:4 (3 taps against 4 sawing cycles per measure), the observed and predicted ratio differed (p = 0.016), with a trend towards synchronisation. Our findings show that bimanual independence when performing complex polyrhythms can in principle be achieved if the movement of one hand can be performed without paying much—if any—attention to it. In this paradigm

Coupling forces resulting from the type of chain saw used

Directory of Open Access Journals (Sweden)

Jolanta Malinowska-Borowska

2014-03-01

Full Text Available Introduction. Woodcutters’ working conditions are difficult due to the presence of numerous occupational hazards. Petrol –fuelled chain saws commonly used in forestry produce vibration, which may lead to the development of non-specific disorders in the upper extremities of the chain saw operator, referred to as hand-arm vibration syndrome (HAVS. The magnitude of coupling forces exerted on a vibrating tool handle may affect the severity of HAVS and hand-wrist cumulative trauma disorders. The aim of the presented study was to measure coupling forces exerted by fellers on various chain saws and to find correlation between force magnitude and type of tool used. Material and methods. Coupling forces applied by workers on different types of chain saws were measured by means of a hydro-electronic force meter. All measurements were carried out during the harvesting of wood in real work conditions. Results. Mean force applied by forestry workers on their tools was 44.2 N. Coupling forces registered during cutting wood with small universal chain saws were larger than forces exerted on models characterized by higher power profile. Forces applied on comparable tools produced by various manufacturers also differed. Conclusions. The relationship between coupling forces and power of the chain saw should lead to ergonomic improvements of the tool and vibration-reducing devices. These results can also be used as a recommendation for fellers in a range of using proper machines for different types of cut or types of wood. They may also be applicable to develop more effective methods for assessing vibration exposure risks among woodcutters.

Critical Analysis of Piezoelectric Surgery with Oscillating Saw in Bimaxillary Orthognathic Surgery.

Science.gov (United States)

Akbar, Zainab; Saleem, Hammad; Ahmed, Waseem

2017-06-01

To compare the piezosurgery with conventional saw for osteotomy in orthognathic bimaxillary surgery. Comparative study. The Armed Forces Institute of Dentistry, Rawalpindi, Pakistan, from January 2012 to July 2015. Twenty-four patients, regardless of gender, were selected for bimaxillary surgery. Each underwent osteotomy with conventional saw and piezosurgery equipment. Intraoperative and postoperative parameters, like blood loss during operation, time required for surgery, postoperative swelling, nerve function, incision and surgical precisons, were evaluated. Out of total 96 osteotomies, 48 (50%) maxillary and 48 (50%) mandibular osteotomies were performed. Time required for piezosurgery was more (63 minutes) as compared to saw (p=0.003). Other parameters, like intraoperative blood loss (p=0.091), postoperative swelling (p=0.041), and nerve damage (p=0.009), were far less frequent with piezosurgery than frequent with saw procedures. Piezosurgery is a favourable alternative technique as compared to saw technique in bimaxillary orthognathic surgeries.

Effects of a saw palmetto herbal blend in men with symptomatic benign prostatic hyperplasia.

Science.gov (United States)

Marks, L S; Partin, A W; Epstein, J I; Tyler, V E; Simon, I; Macairan, M L; Chan, T L; Dorey, F J; Garris, J B; Veltri, R W; Santos, P B; Stonebrook, K A; deKernion, J B

2000-05-01

We tested the effects of a saw palmetto herbal blend in men with symptomatic benign prostatic hyperplasia (BPH) via a randomized, placebo controlled trial. We randomized 44 men 45 to 80 years old with symptomatic BPH into a trial of a saw palmetto herbal blend versus placebo. End points included routine clinical measures (symptom score, uroflowmetry and post-void residual urine volume), blood chemistry studies (prostate specific antigen, sex hormones and multiphasic analysis), prostate volumetrics by magnetic resonance imaging, and prostate biopsy for zonal tissue morphometry and semiquantitative histology studies. Saw palmetto herbal blend and placebo groups had improved clinical parameters with a slight advantage in the saw palmetto group (not statistically significant). Neither prostate specific antigen nor prostate volume changed from baseline. Prostate epithelial contraction was noted, especially in the transition zone, where percent epithelium decreased from 17.8% at baseline to 10.7% after 6 months of saw palmetto herbal blend (p saw palmetto herbal blend (p saw palmetto herbal blend. When the study was no longer blinded, 41 men elected to continue therapy in an open label extension. Saw palmetto herbal blend appears to be a safe, highly desirable option for men with moderately symptomatic BPH. The secondary outcome measures of clinical effect in our study were only slightly better for saw palmetto herbal blend than placebo (not statistically significant). However, saw palmetto herbal blend therapy was associated with epithelial contraction, especially in the transition zone (p <0.01), indicating a possible mechanism of action underlying the clinical significance detected in other studies.

GRASP - A Prototype Interactive Graphic Sawing Program - (Forest Products Journal)

Science.gov (United States)

Luis G. Occeña; Daniel L. Schmoldt

1996-01-01

A versatile microcomputer-based interactive graphics sawing program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, and even veneering. The microcomputer platform makes the tool affordable and accessible. A solid modeling basis provides the tool with a sound geometrical...

In Vitro and In Vivo Evaluation of Polyherbal Formulation against Russell's Viper and Cobra Venom and Screening of Bioactive Components by Docking Studies

Science.gov (United States)

Sakthivel, G.; Dey, Amitabha; Nongalleima, Kh.; Chavali, Murthy; Rimal Isaac, R. S.; Singh, N. Surjit; Deb, Lokesh

2013-01-01

The present study emphasizes to reveal the antivenom activity of Aristolochia bracteolata Lam., Tylophora indica (Burm.f.) Merrill, and Leucas aspera S. which were evaluated against venoms of Daboia russelli russelli (Russell's viper) and Naja naja (Indian cobra). The aqueous extracts of leaves and roots of the above-mentioned plants and their polyherbal (1 : 1 : 1) formulation at a dose of 200 mg/kg showed protection against envenomed mice with LD50 doses of 0.44 mg/kg and 0.28 mg/kg against Russell's viper and cobra venom, respectively. In in vitro antioxidant activities sample extracts showed free radical scavenging effects in dose dependent manner. Computational drug design and docking studies were carried out to predict the neutralizing principles of type I phospholipase A2 (PLA2) from Indian common krait venom. This confirmed that aristolochic acid and leucasin can neutralize type I PLA2 enzyme. Results suggest that these plants could serve as a source of natural antioxidants and common antidote for snake bite. However, further studies are needed to identify the lead molecule responsible for antidote activity. PMID:23533518

See-saw enhancement of neutrino mixing due to the right-handed phases

International Nuclear Information System (INIS)

Tanimoto, M.

1994-11-01

We study the see-saw enhancement mechanism in presence of the right-handed phases of the Dirac neutrino mass matrix and the Majorana mass matrix. The enhancement condition given by Smirnov is modified. We point out that the see-saw enhancement could be obtained due to the right-handed phases even if the Majorana matrix is proportional to the unit matrix. We show a realistic Dirac mass matrix which causes the see-saw enhancement. (author)

Remote disassembly of radioactively contaminated vessels by means of an arc saw

International Nuclear Information System (INIS)

Beitel, G.A.

1977-01-01

The arc saw, a newly developed tool, is a toothless circular saw which cuts by means of an electric arc. Cutting speeds between 20 to 30 cm 2 /S and depths up to 45 cm are possible. There is no mechanical contact between blade and work piece, no binding, and no blade breakage. The arc saw will be applied to the rapid and remote disassembly of multiple ton, contaminated stainless steel vessels

Passive Wireless SAW Humidity Sensors, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This proposal describes the preliminary development of passive wireless surface acoustic wave (SAW) based humidity sensors for NASA application to distributed...

Safety Audit of Band Saw in Manufacturing Organization

Directory of Open Access Journals (Sweden)

Martin Kotus

2016-01-01

Full Text Available This paper deals with the verifying of safety status for a selected device in the manufacturing organization. The safety audit of band saw was realized in the manufacturing process. Safety requirements of the machinery for cutting material are given in the standard STN 20 0723. This standard from the point of view of the work safety defines selected requirements for sawing, cutting compounds and the using of prevention to work with cutting compounds. Among the basic requirements belong material clamping and security services for cut, band saws and jaws wear, as well as the required protective cover. The efficiency of audit in percentage was evaluated by the level of fulfilment as follows: fulfilled (A mostly fulfilled (AB, conditionally fulfilled (B or unfulfilled (C. Through safety audit, were defined the weaknesses that increase the degree of employee health hazard. There were proposed corrective actions to eliminate weaknesses and retraining employees. It is still needed to perform the safety audit due to reduction of the probability of occupational injury.

Theoretical Studies on the SAW Properties of LGS at High-Temperature in Optimal Cuts

Institute of Scientific and Technical Information of China (English)

Xiaojun JI; Tao HAN; Wenkang SHI; Guowei ZHANG

2004-01-01

Surface acoustic wave (SAW) devices play a significant role in signal processing, frequency control and sensing applications. In general, they cannot operate at elevated temperature. The new crystal of langasite provides possibility for surface acoustic wave devices applied at high temperature. This paper studies the SAW properties of single and doubly rotated cuts of LGS at high temperature. The calculated SAW properties of LGS are analyzed in space with aid of contour plots, and two promising SAW orientation regions at high temperature are presented. For some typical cuts and propagating directions within the two optimal regions, their SAW characteristics vs temperature are discussed. Based on the experimental evidence in some literatures, the reliability of calculated results is verified.

Do saw palmetto extracts block human alpha1-adrenoceptor subtypes in vivo?

Science.gov (United States)

Goepel, M; Dinh, L; Mitchell, A; Schäfers, R F; Rübben, H; Michel, M C

2001-02-15

To test whether saw palmetto extracts, which act as alpha1-adrenoceptor antagonists in vitro, also do so in vivo in man. In a placebo-controlled, double-blind, four-way cross-over study 12 healthy young men were treated with three different saw palmetto extract preparations (320 mg o.d.) for 8 days each. On the last day, before and 2, 4 and 6 hr after drug intake blood pressure and heart rate were determined and blood samples obtained, which were used in an ex vivo radioreceptor assay with cloned human alpha1-adrenoceptor subtypes. Saw palmetto extract treatment did not result in alpha1-adrenoceptor subtype occupancy in the radioreceptor assay. Although the saw palmetto extracts caused minor reductions of supine blood pressure, they did not affect blood pressure during orthostatic stress testing and did not alter heart rate under either condition. Moreover, plasma catecholamines remained largely unaltered. Despite their alpha1-adrenoceptor antagonist effects in vitro, therapeutically used doses of saw palmetto extracts do not cause alpha1-adrenoceptor antagonism in man in vivo. Copyright 2001 Wiley-Liss, Inc.

Metabolomics study of Saw palmetto extracts based on 1H NMR spectroscopy.

Science.gov (United States)

de Combarieu, Eric; Martinelli, Ernesto Marco; Pace, Roberto; Sardone, Nicola

2015-04-01

Preparations containing Saw palmetto extracts are used in traditional medicine to treat benign prostatic hyperplasia. According to the European and the American Pharmacopoeias, the extract is obtained from comminuted Saw palmetto berries by a suitable extracting procedure using ethanol or supercritical carbon dioxide or a mixture of n-hexane and methylpentanes. In the present study an approach to metabolomics profiling using nuclear magnetic resonance (NMR) has been used as a finger-printing tool to assess the overall composition of the extracts. The phytochemical analysis coupled with principal component analysis (PCA) showed the same composition of the Saw palmetto extracts obtained with carbon dioxide and hexane with minor not significant differences for extracts obtained with ethanol. In fact these differences are anyhow lower than the batch-to-batch variability ascribable to the natural-occurring variability in the Saw palmetto fruits' phytochemical composition. The fingerprinting analysis combined with chemometric method, is a technique, which would provide a tool to comprehensively assess the quality control of Saw palmetto extracts. Copyright © 2015 Elsevier B.V. All rights reserved.

Saw Palmetto Extract Inhibits Metastasis and Antiangiogenesis through STAT3 Signal Pathway in Glioma Cell.

Science.gov (United States)

Ding, Hong; Shen, Jinglian; Yang, Yang; Che, Yuqin

2015-01-01

Signal transducer and activator of transcription factor 3 (STAT3) plays an important role in the proliferation and angiogenesis in human glioma. Previous research indicated that saw palmetto extract markedly inhibited the proliferation of human glioma cells through STAT3 signal pathway. But its effect on tumor metastasis and antiangiogenesis is not clear. This study is to further clear the impact of saw palmetto extract on glioma cell metastasis, antiangiogenesis, and its mechanism. TUNEL assay indicated that the apoptotic cells in the saw palmetto treated group are higher than that in the control group (p saw palmetto extract inhibits the proliferation of human glioma. Meanwhile pSTAT3 is lower in the experimental group and CD34 is also inhibited in the saw palmetto treated group. This means that saw palmetto extract could inhibit the angiogenesis in glioma. We found that saw palmetto extract was an important phytotherapeutic drug against the human glioma through STAT3 signal pathway. Saw palmetto extract may be useful as an adjunctive therapeutic agent for treatment of individuals with glioma and other types of cancer in which STAT3 signaling is activated.

See-saw motion of thermal boundary layer under vibrations: An implication of forced piston effect

Science.gov (United States)

Sharma, D.; Erriguible, A.; Amiroudine, S.

2017-12-01

The phenomenon of piston effect is well known in supercritical fluids wherein the thermal homogenization of the bulk occurs on a very short time scale due to pressure change caused by expansion or contraction of the fluid in the thermal boundary layer. In this article, we highlight an interesting phenomenon wherein by the application of external forces (vibration) normal to the temperature gradient, see-saw motion of the thermal boundary layer is observed in weightlessness conditions. This is attributed to the thermomechanical coupling caused by the temperature change due to external forces. We term this change in the temperature field due to external forces as forced piston effect (FPE). A detailed investigation of this intriguing behavior shows that the see-saw motion is attributed to the variation of the relative thickness of the thermal boundary layer, defined on the basis of relative local bulk temperature, along the direction of vibration. This change in the temperature field, which is observed to be caused by FPE in vibration, is shown to depend on the compressibility (and thus proximity to the critical point), the imposed acceleration and the cell size. It is also found that see-saw motion persists in the presence of gravity and thus is described ubiquitous in nature for all conditions. A plot illustrating the maximum change in the temperature as a function of these parameters is further proposed.

Development of a Wireless and Passive SAW-Based Chemical Sensor for Organophosphorous Compound Detection

Directory of Open Access Journals (Sweden)

Fang-Qian Xu

2015-12-01

Full Text Available A new wireless and passive surface acoustic wave (SAW-based chemical sensor for organophosphorous compound (OC detection is presented. A 434 MHz reflective delay line configuration composed by single phase unidirectional transducers (SPUDTs and three shorted reflectors was fabricated on YZ LiNbO3 piezoelectric substrate as the sensor element. A thin fluoroalcoholpolysiloxane (SXFA film acted as the sensitive interface deposited onto the SAW propagation path between the second and last reflectors of the SAW device. The first reflector was used for the temperature compensation utilizing the difference method. The adsorption between the SXFA and OC molecules modulates the SAW propagation, especially for the time delay of the SAW, hence, the phase shifts of the reflection peaks from the corresponding reflectors can be used to characterize the target OC. Prior to the sensor fabrication, the coupling of modes (COM and perturbation theory were utilized to predict the SAW device performance and the gas adsorption. Referring to a frequency-modulated continuous wave (FMCW-based reader unit, the developed SAW chemical sensor was wirelessly characterized in gas exposure experiments for dimethylmethylphosphonate (DMMP detection. Sensor performance parameters such as phase sensitivity, repeatability, linearity, and temperature compensation were evaluated experimentally.

Saw Palmetto Extract Inhibits Metastasis and Antiangiogenesis through STAT3 Signal Pathway in Glioma Cell

Directory of Open Access Journals (Sweden)

Hong Ding

2015-01-01

Full Text Available Signal transducer and activator of transcription factor 3 (STAT3 plays an important role in the proliferation and angiogenesis in human glioma. Previous research indicated that saw palmetto extract markedly inhibited the proliferation of human glioma cells through STAT3 signal pathway. But its effect on tumor metastasis and antiangiogenesis is not clear. This study is to further clear the impact of saw palmetto extract on glioma cell metastasis, antiangiogenesis, and its mechanism. TUNEL assay indicated that the apoptotic cells in the saw palmetto treated group are higher than that in the control group (p<0.05. The apoptosis related protein is detected and the results revealed that saw palmetto extract inhibits the proliferation of human glioma. Meanwhile pSTAT3 is lower in the experimental group and CD34 is also inhibited in the saw palmetto treated group. This means that saw palmetto extract could inhibit the angiogenesis in glioma. We found that saw palmetto extract was an important phytotherapeutic drug against the human glioma through STAT3 signal pathway. Saw palmetto extract may be useful as an adjunctive therapeutic agent for treatment of individuals with glioma and other types of cancer in which STAT3 signaling is activated.

Design of a Power Tool Attachment for Sawing Operation

Directory of Open Access Journals (Sweden)

Mayur Appaiah

2015-07-01

Full Text Available The Design of a Power Tool Attachment for Sawing Operation is discussed. First, the Target Specifications are established. The Design work is carried out, especially that of the Main Shaft and Support Tube. Calculations and Finite Element Analysis (FEA are also done. The Prototype is fabricated and assembled. The Testing of the prototype is done, by Sawing commercial plywood of maximum thickness 25mm. Weight of the Attachment is 1.3 kg, and the Machine is easy to use, benefitting unskilled users.

Molecular cloning, expression and characterization of albolamin: a type P-IIa snake venom metalloproteinase from green pit viper (Cryptelytrops albolabris).

Science.gov (United States)

Jangprasert, Panchalee; Rojnuckarin, Ponlapat

2014-03-01

Snake venom metalloproteinases (SVMPs) can damage vessel wall, degrade clotting factors, inhibit integrins and block platelet functions. Studying them not only gives us deeper insights in pathogenesis of snakebites, but also potentially yields novel therapeutic agents. Here, we discovered a clone of an RGD-containing SVMP from the green pit viper (Cryptelytrops albolabris) venom gland cDNA library. Sequence analysis revealed that it belonged to the P-IIa subclass of SVMP comprising signal peptide, prodomain, metalloproteinase and disintegrin. Compared with other P-II SVMPs, it contained 2 additional conserved cysteines that were predicted to prevent the release of disintegrin from the metalloproteinase domain in the mature protein. The N-terminal histidine-tagged construct of metalloproteinase and disintegrin domains of albolamin was inserted into the pPICZαA vector and expressed in Pichia pastoris. The recombinant protein molecular weight was approximately 35 kDa on Western blot probed with anti-polyhistidine antibody. The recombinant albolamin could digest human type IV collagen starting within 15 min after incubation. In addition, it dose-dependently inhibited collagen-induced platelet aggregation with the IC50 of 1.8 μM. However, there was no effect on ADP-induced platelet aggregation. Therefore, the inhibition mechanism is probably through blocking collagen receptor(s). Albolamin activities probably contributed to pathology of green pit viper bites. Its disintegrin domain deserves further studies for the potential to be a useful agent affecting platelet functions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Wound Myiasis Due to Musca domestica (Diptera: Muscidae in Persian Horned Viper, Pseudocerastes persicus (Squamata: Viperidae

Directory of Open Access Journals (Sweden)

R Dehghani

2012-06-01

Full Text Available A case of myiasis due to Musca domestica describes in Pseudocerastes persicus for the first time. The snake was found in Bari Karafs, Kashan, Iran, with a lesion on its body. Fourteen live larvae of M. domestica removed from its wound. This is the first report of a new larval habitat of M. domestica.

Seasonal, daily activity, and habitat use by three sympatric pit vipers (Serpentes, Viperidae) from southern Brazil.

Science.gov (United States)

Rocha, Marcelo C; Hartmann, Paulo A; Winck, Gisele R; Cechin, Sonia Z

2014-04-25

Viperid snakes are widely distributed in the South America and the greater distribution range of the family is found at the Crotalinae subfamily. Despite the abundance of this snakes along their geographic distribution, some ecological aspects remain unknown, principally at subtropical areas. In the present study, we evaluated the activity (daily and seasonal) and the use of the habitat by Bothrops diporus, B. jararaca and B. jararacussu, in an Atlantic Forest area at southern Brazil. We observed higher incidence of viperid snakes during the months with higher temperatures, while no snakes were found during the months with lower temperatures. The data suggest the minimum temperature as environmental variable with the greatest influence on the seasonal activity of this species. Considering the daily activity, we observed a tendency of snakes to avoid the warmest hours. Bothrops jararacussu tend to avoid open areas, being registered only inside and at the edges of the forest. We compared our results with previous studies realized at tropical areas and we suggest the observed seasonal activity as an evolutive response, despite the influence of the different environmental variables, according to the occurence region.

Seasonal, daily activity, and habitat use by three sympatric pit vipers (Serpentes, Viperidae from southern Brazil

Directory of Open Access Journals (Sweden)

MARCELO C. ROCHA

2014-06-01

Full Text Available Viperid snakes are widely distributed in the South America and the greater distribution range of the family is found at the Crotalinae subfamily. Despite the abundance of this snakes along their geographic distribution, some ecological aspects remain unknown, principally at subtropical areas. In the present study, we evaluated the activity (daily and seasonal and the use of the habitat by Bothrops diporus, B. jararaca andB. jararacussu, in an Atlantic Forest area at southern Brazil. We observed higher incidence of viperid snakes during the months with higher temperatures, while no snakes were found during the months with lower temperatures. The data suggest the minimum temperature as environmental variable with the greatest influence on the seasonal activity of this species. Considering the daily activity, we observed a tendency of snakes to avoid the warmest hours. Bothrops jararacussu tend to avoid open areas, being registered only inside and at the edges of the forest. We compared our results with previous studies realized at tropical areas and we suggest the observed seasonal activity as an evolutive response, despite the influence of the different environmental variables, according to the occurence region.

Seasonal, daily activity, and habitat use by three sympatric pit vipers (Serpentes, Viperidae) from southern Brazil

OpenAIRE

ROCHA, MARCELO C.; HARTMANN, PAULO A.; WINCK, GISELE R.; CECHIN, SONIA Z.

2014-01-01

Viperid snakes are widely distributed in the South America and the greater distribution range of the family is found at the Crotalinae subfamily. Despite the abundance of this snakes along their geographic distribution, some ecological aspects remain unknown, principally at subtropical areas. In the present study, we evaluated the activity (daily and seasonal) and the use of the habitat by Bothrops diporus, B. jararaca andB. jararacussu, in an Atlantic Forest area at southern Brazil. We obser...

Cultivation of different strains of king oyster mushroom (Pleurotus eryngii) on saw dust and rice straw in Bangladesh.

Science.gov (United States)

Moonmoon, Mahbuba; Uddin, Md Nazim; Ahmed, Saleh; Shelly, Nasrat Jahan; Khan, Md Asaduzzaman

2010-10-01

Pleurotus eryngii is a popular mushroom due to its excellent consistency of cap and stem, culinary qualities and longer shelf life. In Bangladesh, where Pleurotus mushrooms are very popular, P. eryngii may take position among the consumers, but currently this mushroom is not cultivated in large scale there. In this study, 3 strains of P. eryngii such as Pe-1 (native to Bangladesh), Pe-2 (germplasm collected from China) and Pe-3 (germplasm collected from Japan) were cultivated on saw dust and rice straw and their growth and yield parameters were investigated. Pe-1 on saw dust showed the highest biological yield and efficiency (73.5%) than other strains. Also, the mycelium run rate and number of fruiting bodies were higher in Pe-1 than other two strains. The quality of mushroom strains was near about similar. On saw dust, the yield and efficiency were better than those cultivated on rice straw, however, on straw; the mushroom fruiting bodies were larger in size. This study shows the prospects of P. eryngii cultivation in Bangladesh and suggests further study in controlled environment for higher yield and production.

Advances in SAW gas sensors based on the condensate-adsorption effect.

Science.gov (United States)

Liu, Jiuling; Wang, Wen; Li, Shunzhou; Liu, Minghua; He, Shitang

2011-01-01

A surface-acoustic-wave (SAW) gas sensor with a low detection limit and fast response for volatile organic compounds (VOCs) based on the condensate-adsorption effect detection is developed. In this sensor a gas chromatography (GC) column acts as the separator element and a dual-resonator oscillator acts as the detector element. Regarding the surface effective permittivity method, the response mechanism analysis, which relates the condensate-adsorption effect, is performed, leading to the sensor performance prediction prior to fabrication. New designs of SAW resonators, which act as feedback of the oscillator, are devised in order to decrease the insertion loss and to achieve single-mode control, resulting in superior frequency stability of the oscillator. Based on the new phase modulation approach, excellent short-term frequency stability (±3 Hz/s) is achieved with the SAW oscillator by using the 500 MHz dual-port resonator as feedback element. In a sensor experiment investigating formaldehyde detection, the implemented SAW gas sensor exhibits an excellent threshold detection limit as low as 0.38 pg.

Surface Acoustic Wave (SAW for Chemical Sensing Applications of Recognition Layers

Directory of Open Access Journals (Sweden)

Adnan Mujahid

2017-11-01

Full Text Available Surface acoustic wave (SAW resonators represent some of the most prominent acoustic devices for chemical sensing applications. As their frequency ranges from several hundred MHz to GHz, therefore they can record remarkably diminutive frequency shifts resulting from exceptionally small mass loadings. Their miniaturized design, high thermal stability and possibility of wireless integration make these devices highly competitive. Owing to these special characteristics, they are widely accepted as smart transducers that can be combined with a variety of recognition layers based on host-guest interactions, metal oxide coatings, carbon nanotubes, graphene sheets, functional polymers and biological receptors. As a result of this, there is a broad spectrum of SAW sensors, i.e., having sensing applications ranging from small gas molecules to large bio-analytes or even whole cell structures. This review shall cover from the fundamentals to modern design developments in SAW devices with respect to interfacial receptor coatings for exemplary sensor applications. The related problems and their possible solutions shall also be covered, with a focus on emerging trends and future opportunities for making SAW as established sensing technology.

Surface Acoustic Wave (SAW) for Chemical Sensing Applications of Recognition Layers.

Science.gov (United States)

Mujahid, Adnan; Dickert, Franz L

2017-11-24

Surface acoustic wave (SAW) resonators represent some of the most prominent acoustic devices for chemical sensing applications. As their frequency ranges from several hundred MHz to GHz, therefore they can record remarkably diminutive frequency shifts resulting from exceptionally small mass loadings. Their miniaturized design, high thermal stability and possibility of wireless integration make these devices highly competitive. Owing to these special characteristics, they are widely accepted as smart transducers that can be combined with a variety of recognition layers based on host-guest interactions, metal oxide coatings, carbon nanotubes, graphene sheets, functional polymers and biological receptors. As a result of this, there is a broad spectrum of SAW sensors, i.e., having sensing applications ranging from small gas molecules to large bio-analytes or even whole cell structures. This review shall cover from the fundamentals to modern design developments in SAW devices with respect to interfacial receptor coatings for exemplary sensor applications. The related problems and their possible solutions shall also be covered, with a focus on emerging trends and future opportunities for making SAW as established sensing technology.

Ethanol extracts of saw palmetto contain the indirectly acting sympathomimetic: tyramine.

Science.gov (United States)

Chua, Thiam; Simpson, Jamie S; Ventura, Sabatino

2011-01-01

To identify the bioactive components of saw palmetto ethanol extracts that affect contractility in the rat prostate gland. A commercially available saw palmetto ethanol extract was lyophilized then subjected to fractionation using silica gel column chromatography. Composition of fractions was assessed by proton nuclear magnetic resonance ((1)H NMR) spectroscopy and mass spectrometry (MS). Contractile activity of these fractions was evaluated pharmacologically using isolated preparations of rat prostate gland and compared to the activity of crude ethanol extract. Saw palmetto ethanol extract caused contractions of the rat prostate gland which were consistent with indirectly acting sympathomimetic activity. Fractions resulting from chromatography produced contractions of isolated rat prostates that were similar in magnitude to the contractions produced by the crude extracts. Analysis of NMR and mass spectra revealed that this bioactivity was due to tyramine in the active fraction. Tyramine is present in saw palmetto ethanol extracts and causes indirect α(1)-adrenoceptor mediated contractions via the release of noradrenaline from sympathetic neurons. This has clinical implications, as tyramine interacts with MAO inhibitors to cause hypertensive crisis. © 2010 Wiley-Liss, Inc.

Resonance Frequency Readout Circuit for a 900 MHz SAW Device.

Science.gov (United States)

Liu, Heng; Zhang, Chun; Weng, Zhaoyang; Guo, Yanshu; Wang, Zhihua

2017-09-15

A monolithic resonance frequency readout circuit with high resolution and short measurement time is presented for a 900 MHz RF surface acoustic wave (SAW) sensor. The readout circuit is composed of a fractional-N phase-locked loop (PLL) as the stimulus source to the SAW device and a phase-based resonance frequency detecting circuit using successive approximation (SAR). A new resonance frequency searching strategy has been proposed based on the fact that the SAW device phase-frequency response crosses zero monotonically around the resonance frequency. A dedicated instant phase difference detecting circuit is adopted to facilitate the fast SAR operation for resonance frequency searching. The readout circuit has been implemented in 180 nm CMOS technology with a core area of 3.24 mm². In the experiment, it works with a 900 MHz SAW resonator with a quality factor of Q = 130. Experimental results show that the readout circuit consumes 7 mW power from 1.6 V supply. The frequency resolution is 733 Hz, and the relative accuracy is 0.82 ppm, and it takes 0.48 ms to complete one measurement. Compared to the previous results in the literature, this work has achieved the shortest measurement time with a trade-off between measurement accuracy and measurement time.

Surface Acoustic Wave (SAW Resonators for Monitoring Conditioning Film Formation

Directory of Open Access Journals (Sweden)

Siegfried Hohmann

2015-05-01

Full Text Available We propose surface acoustic wave (SAW resonators as a complementary tool for conditioning film monitoring. Conditioning films are formed by adsorption of inorganic and organic substances on a substrate the moment this substrate comes into contact with a liquid phase. In the case of implant insertion, for instance, initial protein adsorption is required to start wound healing, but it will also trigger immune reactions leading to inflammatory responses. The control of the initial protein adsorption would allow to promote the healing process and to suppress adverse immune reactions. Methods to investigate these adsorption processes are available, but it remains difficult to translate measurement results into actual protein binding events. Biosensor transducers allow user-friendly investigation of protein adsorption on different surfaces. The combination of several transduction principles leads to complementary results, allowing a more comprehensive characterization of the adsorbing layer. We introduce SAW resonators as a novel complementary tool for time-resolved conditioning film monitoring. SAW resonators were coated with polymers. The adsorption of the plasma proteins human serum albumin (HSA and fibrinogen onto the polymer-coated surfaces were monitored. Frequency results were compared with quartz crystal microbalance (QCM sensor measurements, which confirmed the suitability of the SAW resonators for this application.

Surface Acoustic Wave (SAW-Enhanced Chemical Functionalization of Gold Films

Directory of Open Access Journals (Sweden)

Gina Greco

2017-10-01

Full Text Available Surface chemical and biochemical functionalization is a fundamental process that is widely applied in many fields to add new functions, features, or capabilities to a material’s surface. Here, we demonstrate that surface acoustic waves (SAWs can enhance the chemical functionalization of gold films. This is shown by using an integrated biochip composed by a microfluidic channel coupled to a surface plasmon resonance (SPR readout system and by monitoring the adhesion of biotin-thiol on the gold SPR areas in different conditions. In the case of SAW-induced streaming, the functionalization efficiency is improved ≈ 5 times with respect to the case without SAWs. The technology here proposed can be easily applied to a wide variety of biological systems (e.g., proteins, nucleic acids and devices (e.g., sensors, devices for cell cultures.

Evaluation of saw damage using diamond-coated wire in crystalline silicon solar cells by photoluminescence imaging

Science.gov (United States)

Kinoshita, Kosuke; Kojima, Takuto; Suzuki, Ryota; Kawatsu, Tomoyuki; Nakamura, Kyotaro; Ohshita, Yoshio; Ogura, Atsushi

2018-05-01

Si ingots were sliced using a diamond-coated wire, and saw damage was observed even after damage removal etching and texturization. Since invisible microscopic damage was observed only under uncontrolled slice conditions, such damage was identified as saw damage. The wafers with saw damage exhibited the degradation of solar cell conversion efficiency (approximately 1–2% absolute). The results of external quantum efficiency (EQE) measurements showed a slight deterioration of EQE in the short wavelength region. Current–voltage characteristic measurements showed similar results that agreed with the EQE measurement results. In addition, EQE mapping measurements were carried out at various irradiation wavelengths between 350 and 1150 nm. Areas with dark contrasts in EQE mapping correspond to saw damage. In the cells with a low conversion efficiency, both EQE mapping and PL images exhibited dark areas and lines. On the other hand, in the cells with a high conversion efficiency, a uniform distribution of saw damage was observed even with the saw damage in the PL images. We believe that sophisticated control to suppress saw damage during sawing is required to realize higher conversion efficiency solar cells in the future.

Public health aspects of snakebite care in West Africa: perspectives from Nigeria.

Science.gov (United States)

Habib, Abdulrazaq G

2013-10-17

Snakebite envenoming is a major public health problem among rural communities of the Nigerian savanna. The saw-scaled or carpet viper (Echis ocellatus) and, to a lesser extent, the African cobras (Naja spp.) and puff adders (Bitis arietans) have proved to be the most important cause of mortality and morbidity. The main clinical features of E. ocellatus envenoming are systemic hemorrhage, incoagulable blood, shock, local swelling, bleeding and, occasionally, necrosis. Bites may be complicated by amputation, blindness, disability, disfigurement, mutilation, tissue destruction and psychological consequences. Antivenom remains the hallmark and mainstay of envenoming management while studies in Nigeria confirm its protection of over 80% against mortality from carpet-viper bites. However, the availability, distribution and utilization of antivenom remain challenging although two new antivenoms (monospecific EchiTab G and trispecific EchiTab ICP-Plus) derived from Nigerian snake venoms have proven very effective and safe in clinical trials. A hub-and-spoke strategy is suggested for broadening antivenom access to endemic rural areas together with instituting quality assurance, standardization and manpower training. With the advent of antivenomics, national health authorities must be aided in selecting and purchasing antivenoms appropriate to their national needs while manufacturers should be helped in practical ways to improve the safety, efficacy and potential coverage against snake venoms and pricing of their products.

Transimpedance Amplifier for MEMS SAW Oscillator in 1.4GHz

Science.gov (United States)

Kamarudin, N.; Karim, J.; Hussin, H.

2018-03-01

This work is to design a transimpedance amplifier for MEMS SAW resonator to achieve low power consumption at desired frequency. A transimpedance amplifier is designed and characterized for MEMS SAW resonator in 0.18μm CMOS process. The transimpedance amplifier achieves gain is 31 dBΩ at 176°. The power consume by oscillator is 0.6mW at VDD 1.8V while phase noise at -133.97dBc/Hz at 10kHz.

A novel gene: sawD related to the differentiation of streptomyces ansochromogenes.

Science.gov (United States)

Gang, L; Wei, C; Yuqing, T; Huarong, T; Chater, K F; Buttner, M J

1999-01-01

A 1.3 kb DNA fragment was cloned from a total DNA library of Streptomyces ansochromogenes using Southern hybridization. Nucleotide sequencing analysis indicated that the 1320 bp DNA fragment contained a complete open reading frame (ORF). In search of databases, the deduced product of ORF containing 213 amino acids is homologous to the serine protease of Caulobacter cresceatus, and a conserved serine-catalytic active site (GPSAG) exists. The gene was designated as sawD. The function of this gene was studied with the strategy of gene disruption, and the result showed that the sawD may be related to sporulation and especially to the spore septation in Streptomyces ansochromogenes. The preliminary result indicated that sawD mutant could produce abundant pigment in contrast with the wild type, it seems that sawD gene may be involved in pigment biosynthesis, and this gene is also dispensable for biosynthesis of nikkomycin in Streptomyces ansochromogenes.

Study of a high-precision SAW-MOEMS strain sensor with laser optics

International Nuclear Information System (INIS)

Liu, Xinwei; Chen, Shufen; Zou, Zhengfeng; Fu, Lei; Meng, Yanbin; Li, Honglang

2015-01-01

A novel structure design of a surface acoustic wave (SAW) micro-optic-electro-mechanical-system (MOEMS) strain sensor with a light readout unit is presented in this paper. By measuring the polarization intensity ratio of the TE/TM mode outputted from the waveguide, the strain produced from an object can be measured precisely. The basic working principle of the SAW MOEMS strain sensor is introduced and the mathematical model of the strain sensor system is established. The SAW characteristics effected by the strain sensor are mathematically deduced. The coupling coefficient between the SAW modes and light modes can be calculated based on the theory of coupling modes. The conversion coefficient of polarized light modes is obtained. Due to the restrictions of the specific parameters of the device, the level of technology and the material characteristics, the sensitivity of the strain sensor system is calculated through simulation as 0.1 με, with a dynamic range of 0 ∼ ±50 με. (paper)

Hepatotoxicity potential of saw palmetto (Serenoa repens) in rats.

Science.gov (United States)

Singh, Y N; Devkota, A K; Sneeden, D C; Singh, K K; Halaweish, F

2007-02-01

Saw palmetto (Serenoa repens L.) is an herbal drug used to treat symptoms of benign prostatic hyperplasia (BPH) and lower urinary tract symptoms (LUTS). There has been a report that a preparation containing this herb has caused cholestatic hepatitis in one person and some indications exist that it may have the potential to produce liver toxicity. The purpose of this study was to evaluate the effect of saw palmetto on rat liver function by measuring its effects on several enzymes and formation of malondialdehyde (MDA), a byproduct of lipid peroxidation. A significant increase in these parameters is considered an indication of liver toxicity. Thirty-six rats were divided into 6 groups of 6 animals each. They were treated for 2 or 4 weeks with a placebo or saw palmetto at doses of 9.14 or 22.86 mg/kg/body wt./day; that is, 2 x and 5 x the maximum recommended daily human dosages. After 2 or 4 weeks, the animals were sacrificed and blood was collected to prepare serum for enzyme assays, which were performed using commercially available kits. A portion of the liver was removed, and a homogenate prepared for the lipid peroxidation assay. Results showed no significant difference in animal body weight, enzyme activity, or MDA formation at either time or dosage level, as compared to controls. The data indicate that at the doses and time periods tested, saw palmetto did not produce any significant effect on the normal biological markers of liver toxicity.

Metode Dakwah Rasulullah SAW kepada Golongan Non Muslim di Madinah

Directory of Open Access Journals (Sweden)

Dalinur M Nur

2017-09-01

Full Text Available Da'wah is a call to believe in Allah SWT, dakwah is not a special task to a particular person but to all Moslems. In delivering da'wah required various methods and strategies in order the message of da'wah is accepted to the mad'unya. At the time of Rasulullah SAW, the method of dakwah used to non-Muslims in Medina was da'wah through writing (Da'wah bil Al-Qalam. He sent messengers, who carried Islamic invitations which addressed to Heraclius (Roman Emperors, King Negus (Ruler of Ethiopia, Khusrau (Persian Ruler, and other great leaders. This is motivated by the Hudaibiyah Peace Agreement, political and theological. The contents of the Prophet's message of propaganda send to the kings was amazing, always preceded by Basmalah, some letters also include verses of the Qur'an. The composition of the sentence in the letter of the Prophet SAW always preceded the phrase "From Muhammad, the servant of Allah, and his messenger", then mention the name of the king who became the object and mention his position and power. The message by Rasulullah SAW gives persuasive value to invite kings to embrace Islam. Besides writing method Rasulullah SAW delivered dakwah to the non-Muslims in Medina was lack of coercion in embracing Islam, equality, fairness, honesty, rahmah and goodness.

Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC Algorithm

Directory of Open Access Journals (Sweden)

Masoud Akhyani

2017-12-01

Full Text Available Artificial Intelligence (AI techniques are used for solving the intractable engineering problems. In this study, it is aimed to study the application of artificial bee colony algorithm for predicting the performance of circular diamond saw in sawing of hard rocks. For this purpose, varieties of fourteen types of hard rocks were cut in laboratory using a cutting rig at 5 mm depth of cut, 40 cm/min feed rate and 3000 rpm peripheral speed. Four major mechanical and physical properties of studied rocks such as uniaxial compressive strength (UCS, Schimazek abrasivity factor (SF-a, Mohs hardness (Mh, and Young’s modulus (Ym were determined in rock mechanic laboratory. Artificial bee colony (ABC was used to classify the performance of circular diamond saw based on mentioned mechanical properties of rocks. Ampere consumption and wear rate of diamond saw were selected as criteria to evaluate the result of ABC algorithm. Ampere consumption was determined during cutting process and the average wear rate of diamond saw was calculated from width, length and height loss. The results of comparison between ABC’s results and cutting performance (ampere consumption and wear rate of diamond saw indicated the ability of metaheuristic algorithm such as ABC to evaluate the cutting performance.

Population Pharmacokinetics of an Indian F(ab'2 Snake Antivenom in Patients with Russell's Viper (Daboia russelii Bites.

Directory of Open Access Journals (Sweden)

Geoffrey K Isbister

Full Text Available There is limited information on antivenom pharmacokinetics. This study aimed to investigate the pharmacokinetics of an Indian snake antivenom in humans with Russell's viper bites.Patient data and serial blood samples were collected from patients with Russell's viper (Daboia russelii envenoming in Sri Lanka. All patients received Indian F(ab'2 snake antivenom manufactured by VINS Bioproducts Ltd. Antivenom concentrations were measured with sandwich enzyme immunoassays. Timed antivenom concentrations were analysed using MONOLIXvs4.2. One, two and three compartment models with zero order input and first order elimination kinetics were assessed. Models were parameterized with clearance (CL, intercompartmental clearance (Q, central compartment volume (V and peripheral compartment volume (VP. Between-subject-variability (BSV on relative bioavailability (F was included to account for dose variations. Covariates effects (age, sex, weight, antivenom batch, pre-antivenom concentrations were explored by visual inspection and in model building. There were 75 patients, median age 57 years (40-70 y and 64 (85% were male. 411 antivenom concentration data points were analysed. A two compartment model with zero order input, linear elimination kinetics and a combined error model best described the data. Inclusion of BSV on F and weight as a covariate on V improved the model. Inclusion of pre-antivenom concentrations or different batches on BSV of F did not. Final model parameter estimates were CL,0.078 L h(-1, V,2.2L, Q,0.178 L h(-1 and VP,8.33L. The median half-life of distribution was 4.6 h (10-90%iles:2.6-7.1 h and half-life of elimination, 140 h (10th-90th percentilesx:95-223h.Indian F(ab'2 snake antivenom displayed biexponential disposition pharmacokinetics, with a rapid distribution half-life and more prolonged elimination half-life.

Preventing Chain Saw Injuries After a Disaster

Centers for Disease Control (CDC) Podcasts

2006-08-10

If you must use a chain saw, follow the instructions to be safe. Wear a hard hat, safety glasses, ear plugs, thick work gloves, chaps, and boots.  Created: 8/10/2006 by Emergency Communications System.   Date Released: 9/24/2008.

Simpson's neutrino and the singular see-saw

International Nuclear Information System (INIS)

Allen, T.J.; Johnson, R.; Ranfone, S.; Schechter, J.; Walle, J.W.F.

1991-01-01

The authors of this paper derive explicit forms for the neutrino and lepton mixing-matrices which describe the generic singular see-saw model. The dependence on the hierarchy parameter is contrasted with the non-singular case. Application is made to Simpson's 17 keV neutrino

Randomized, double-blind, placebo-controlled trial of saw palmetto in men with lower urinary tract symptoms.

Science.gov (United States)

Gerber, G S; Kuznetsov, D; Johnson, B C; Burstein, J D

2001-12-01

To assess the effects of saw palmetto on urinary symptoms, sexual function, and urinary flow rate in men with lower urinary tract symptoms using a double-blind, randomized, placebo-controlled trial. The eligible patients were 45 years of age or older and had an International Prostate Symptom Score of 8 or greater. After a 1-month placebo run-in period, 85 men were randomized to receive saw palmetto or placebo for 6 months. Patients were evaluated using the International Prostate Symptom Score, a sexual function questionnaire, and by measurement of the urinary flow rate. The mean symptom score decreased from 16.7 to 12.3 in the saw palmetto group compared with 15.8 to 13.6 in the placebo group (P = 0.038). The quality-of-life score improved to a greater degree in the saw palmetto group, but this difference was not statistically significant. No change occurred in the sexual function questionnaire results in either group. The peak flow rate increased by 1.0 mL/s and 1.4 mL/s in the saw palmetto and placebo groups, respectively (P = 0.73). Saw palmetto led to a statistically significant improvement in urinary symptoms in men with lower urinary tract symptoms compared with placebo. Saw palmetto had no measurable effect on the urinary flow rates. The mechanism by which saw palmetto improves urinary symptoms remains unknown.

PEMANFAATAN METODE SAW PENDUKUNG KEPUTUSAN PENILAIAN EFEKTIVITAS MODEL PEMBELAJARAN

Directory of Open Access Journals (Sweden)

Tri Apriyanto Sundara

2017-05-01

Full Text Available Students who are in junior high school should have been able to read children stories appreciative. However, based on the results of research that has been done, appreciative children's story reading skills in students is still low due to the model applied learning teachers have not been effective. This study is a follow-up that aims to identify effective learning model that can be used by teachers in teaching reading children stories appreciative. The learning model studied is a model of Group Investigation (GI and Jurisprudential Inquiry (JI to utilize the Simple Additive Weighting (SAW method for support decision. The criteria on which the decision is motivation and student learning outcomes. Based on the analysis of data using SAW method, it is known that an effective learning model applied to teachers in teaching reading children's stories are appreciative GI learning model.  Siswa yang duduk di bangku SMP selayaknya telah mampu membaca apresiatif cerita anak. Namun, berdasarkan hasil penelitian yang telah dilakukan, keterampilan membaca apresiatif cerita anak pada siswa masih rendah dikarenakan model pembelajaran yang diterapkan guru belum efektif. Penelitian ini merupakan penelitian lanjutan yang bertujuan untuk mengetahui model pembelajaran efektif yang dapat digunakan guru dalam pembelajaran membaca apresiatif cerita anak. Model pembelajaran yang diteliti adalah model Group Investigation (GI dan Jurisprudential Inquiry (JI dengan memanfaatkan metode Simple Additive Weighting (SAW sebagai pendukung keputusan. Adapun kriteria yang menjadi dasar pengambilan keputusan adalah motivasi dan hasil belajar siswa. Berdasarkan hasil analisis data dengan menggunakan metode SAW, dapat diketahui bahwa model pembelajaran yang efektif diterapkan guru dalam pembelajaran membaca apresiatif cerita anak adalah model pembelajaran GI.

A see-saw scenario of an $A_4$ flavour symmetric standard model

CERN Document Server

Dinh, Dinh Nguyen; Văn, Phi Quang; Vân, Nguyen Thi Hông

2016-01-01

A see-saw scenario for an $A_4$ flavour symmetric standard model is presented. As before, the see-saw mechanism can be realized in several models of different types depending on different ways of neutrino mass generation corresponding to the introduction of new fields with different symmetry structures. In the present paper, a general desription of all these see-saw types is made with a more detailed investigation on type-I models. As within the original see-saw mechanism, the symmetry structure of the standard model fields decides the number and the symmetry structure of the new fields. In a model considered here, the scalar sector consists of three standard-model-Higgs-like iso-doublets ($SU_L(2)$-doublets) forming an $A_4$ triplet. The latter is a superposition of three mass-eigen states, one of which could be identified with the recently discovered Higgs boson. A possible relation to the still-deliberated 750 GeV diphoton resonance at the 13 TeV LHC collisions is also discussed. In the lepton sector, the ...

Signal processing circuitry for CMOS-based SAW gas sensors with low power and area

International Nuclear Information System (INIS)

Mohd-Yasin, F.; Tye, K.F.; Reaz, M.B.I.

2009-06-01

The design and development of interface circuitries for CMOS-based SAW gas sensor is presented in this paper. The SAW gas sensor devices typically run at RF, requiring most designs to have complex signal conditioning circuitry. The proposed approach attempts to design a simple architecture with reduced power consumption. The SAW gas sensors operate at 354MHz. Simulation data show that the interface circuitries are ten times smaller with lower power supply, comparing to existing work. (author)

Safety and toxicity of saw palmetto in the CAMUS trial.

Science.gov (United States)

Avins, Andrew L; Lee, Jeannette Y; Meyers, Catherine M; Barry, Michael J

2013-04-01

Extracts of the saw palmetto berry are used by many men in the United States as self-treatment for lower urinary tract symptoms due to benign prostatic hyperplasia. While the most recent data from double-blind clinical trials do not support efficacy superior to that of placebo, there are sparse data on saw palmetto toxicity. A total of 369 patients were randomized in the CAMUS (Complementary and Alternative Medicine for Urological Symptoms) trial, of whom 357 were included in this modified intent to treat analysis. Participants were randomized to 320, 640 and 960 mg daily of an ethanolic saw palmetto extract or to an identical-appearing placebo in an escalating manner at 6-month intervals for a total of 18 months of followup. Adverse event assessments, vital signs, and blood and urine laboratory tests were obtained at regular intervals. There were no statistically significant differences between the groups in the rates of serious or nonserious adverse events, changes in vital signs, digital prostate examination findings or study withdrawal rates. Overall, there were no significant intergroup differences in laboratory test abnormalities, while differences in individual laboratory tests were rare and small in magnitude. No evidence of significant dose-response phenomena was identified. The saw palmetto extract used in the CAMUS trial showed no evidence of toxicity at doses up to 3 times the usual clinical dose during an 18-month period. Copyright © 2013 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness

Science.gov (United States)

Tumac, Deniz

2014-03-01

Shore hardness has been used to estimate several physical and mechanical properties of rocks over the last few decades. However, the number of researches correlating Shore hardness with rock cutting performance is quite limited. Also, rather limited researches have been carried out on predicting the performance of chain saw machines. This study differs from the previous investigations in the way that Shore hardness values (SH1, SH2, and deformation coefficient) are used to determine the field performance of chain saw machines. The measured Shore hardness values are correlated with the physical and mechanical properties of natural stone samples, cutting parameters (normal force, cutting force, and specific energy) obtained from linear cutting tests in unrelieved cutting mode, and areal net cutting rate of chain saw machines. Two empirical models developed previously are improved for the prediction of the areal net cutting rate of chain saw machines. The first model is based on a revised chain saw penetration index, which uses SH1, machine weight, and useful arm cutting depth as predictors. The second model is based on the power consumed for only cutting the stone, arm thickness, and specific energy as a function of the deformation coefficient. While cutting force has a strong relationship with Shore hardness values, the normal force has a weak or moderate correlation. Uniaxial compressive strength, Cerchar abrasivity index, and density can also be predicted by Shore hardness values.

A saw-tooth plasma actuator for film cooling efficiency enhancement of a shaped hole

Science.gov (United States)

Li, Guozhan; Yu, Jianyang; Liu, Huaping; Chen, Fu; Song, Yanping

2017-08-01

This paper reports the large eddy simulations of the effects of a saw-tooth plasma actuator and the laidback fan-shaped hole on the film cooling flow characteristics, and the numerical results are compared with a corresponding standard configuration (cylindrical hole without the saw-tooth plasma actuator). For this numerical research, the saw-tooth plasma actuator is installed just downstream of the cooling hole and a phenomenological plasma model is employed to provide the 3D plasma force vectors. The results show that thanks to the downward force and the momentum injection effect of the saw-tooth plasma actuator, the cold jet comes closer to the wall surface and extends further downstream. The saw-tooth plasma actuator also induces a new pair of vortex which weakens the strength of the counter-rotating vortex pair (CRVP) and entrains the coolant towards the wall, and thus the diffusion of the cold jet in the crossflow is suppressed. Furthermore, the laidback fan-shaped hole reduces the vertical jet velocity causing the disappearance of downstream spiral separation node vortices, this compensates for the deficiency of the saw-tooth plasma actuator. Both effects of the laidback fan-shaped hole and the saw-tooth plasma actuator effectively control the development of the CRVP whose size and strength are smaller than those of the anti-counter rotating vortex pair in the far field, thus the centerline and the spanwise-averaged film cooling efficiency are enhanced. The average film cooling efficiency is the biggest in the Fan-Dc = 1 case, which is 80% bigger than that in the Fan-Dc = 0 case and 288% bigger than that in the Cyl-Dc = 0 case.

Radio requestable passive SAW water content sensor

NARCIS (Netherlands)

Reindl, L.; Ruppel, C.C.W.; Kirmayr, A.; Stockhausen, N.; Hilhorst, M.A.; Balendonk, J.

2001-01-01

A new passive sensor for remote measurement of water content in sandy soil was designed, using a surface acoustic wave (SAW) reflective delay line. Information from this sensor can be obtained by an interrogation device via a radio link operating in the European 434-MHz industrial-scientific-medical

Saw palmetto is an indirectly acting sympathomimetic in the rat-isolated prostate gland.

Science.gov (United States)

Cao, Nga; Haynes, John M; Ventura, Sabatino

2006-02-01

To investigate whether saw palmetto that inhibits alpha1-adrenoceptor binding in vitro affects contractility of the rat prostate gland. The effects of a commercially available saw palmetto extract were examined on the contractility of rat-isolated prostate glands. The extract was tested in the presence and absence of phentolamine, prazosin, yohimbine, propranolol, hexamethonium, cocaine, desipramine, nifedipine, guanethidine, atropine, and alpha,beta-methylene ATP to evaluate the mechanism of action. Isolated preparations of rat vas deferens and bladder were used for comparison. Unexpectedly, saw palmetto extract caused contractions of the rat prostate gland that could be attenuated by prazosin, phentolamine, nifedipine, guanethidine, cocaine, and desipramine but not by any of the other pharmacological tools. Similar contractile effects were observed in rat-isolated vas deferens preparations but not in rat-isolated bladder preparations. In the rat prostate gland, saw palmetto extract causes indirect alpha1-adrenoceptor-mediated contractions via the release of noradrenaline from sympathetic neurons. Copyright 2005 Wiley-Liss, Inc.

Full Dynamic Reactions in the Basic Shaft Bearings of Big Band Saw Machines

Science.gov (United States)

Marinov, Boycho

2013-03-01

The band saws machines are a certain class woodworking machines for longitudinal or transversal cutting as well as for curvilinear wood cutting. These machines saw the wood through a band-saw blade and two feeding wheels. These wheels usually are very large and they are produced with inaccuracies. The centre of mass of the disc is displaced from the axis of rotation of the distance e (eccentricity) and the axis of the disk makes an angle with the axis of rotation. In this paper, the dy- namic reactions in the bearings of the basic shaft, which drives the band saw machines, are analyzed. These reactions are caused by the external loading and the kinematics and the mass characteristics of the rotating disk. The expressions for the full dynamic reactions are obtained. These expressions allow the parameters of the machines to be chosen in such a way that the loading in the shaft and the bearings to be minimal.

See, Seeing, Seen, Saw: A Phenomenology of Ultra-Violent Cinema

Directory of Open Access Journals (Sweden)

Downes Sarah

2014-09-01

Full Text Available Vivian Sobchack claims in Carnal Thoughts that human bodies are continually remade by the “technologies of photography, cinema, and the electronic media” (2004, 135. One such sphere of contemporary media that continuously redefines the notion of the human body is horror cinema. The recent advent of so-called ‘gorenography,’ spearheaded by James Wan and Leigh Whannel’s Saw (2004, issues conceptual and philosophical challenges to the presentation and conceptualization of the phenomenal body. Following in the scope of frameworks advanced by both Sobchack and Jennifer Barker this paper aims to explore how the body of the Saw series is constructed and how it emulates both the conceptualized bodies of its viewers and the state of modern information flow in a technological age. It will be argued that the Saw series not only recognises viewers’ enjoyment of its genre conventions but also acknowledges and manipulates their engagement with the film as a phenomenological object through which a sense of re-embodiment can be enacted

Effect of Increasing Doses of Saw Palmetto on Lower Urinary Tract Symptoms: A Randomized Trial

Science.gov (United States)

Barry, Michael J.; Meleth, Sreelatha; Lee, Jeannette Y.; Kreder, Karl J.; Avins, Andrew L.; Nickel, J. Curtis; Roehrborn, Claus G.; Crawford, E. David; Foster, Harris E.; Kaplan, Steven A.; McCullough, Andrew; Andriole, Gerald L.; Naslund, Michael J.; Williams, O. Dale; Kusek, John W.; Meyers, Catherine M.; Betz, Joseph M.; Cantor, Alan; McVary, Kevin T.

2012-01-01

Context Saw palmetto fruit extracts are widely used for treating lower urinary tract symptoms attributed to benign prostatic hyperplasia. However, recent clinical trials have questioned their efficacy, at least at standard doses (320 mg daily). Objective To determine the effect of a saw palmetto extract at up to three times the standard dose on lower urinary tract symptoms attributed to benign prostatic hyperplasia. Design Multicenter placebo-controlled randomized trial conducted from June, 2008 through October, 2010. Setting Eleven North American clinical sites. Participants Were men at least 45 years old, with a peak urinary flow rate ≥ 4 ml/sec, an AUA Symptom Index (AUASI) score ≥ 8 and ≤ 24, and no exclusions. Interventions One, two, and then three 320 mg daily doses of saw palmetto extract or placebo, with dose increases at 24 and 48 weeks. Main Outcome Measures Primary outcome was the difference in AUASI score from baseline to 72 weeks. Secondary outcomes were measures of urinary bother; nocturia; uroflow; postvoid residual; prostate-specific antigen; participants’ global assessments; and indices of sexual function, continence, sleep quality, and prostatitis symptoms. Results From baseline to 72 weeks, mean AUASI scores decreased from 14.4 to 12.2 points with saw palmetto and from 14.7 to 11.7 points with placebo. The group mean difference in AUASI score change from baseline to 72 weeks between the saw palmetto and placebo groups was 0.79 points favoring placebo (bound of the 95% confidence interval most favorable to saw palmetto was 1.77 points, one-sided P=0.91). Saw palmetto was no more effective than placebo for any secondary outcome. No attributable side effects were identified. Conclusions Increasing doses of a saw palmetto fruit extract did not reduce lower urinary tract symptoms more than placebo. (CAMUS study number NCT00603304 http://www.ClinicalTrials.gov) PMID:21954478

The VIMOS Public Extragalactic Redshift Survey (VIPERS). The growth of structure at 0.5 < z < 1.2 from redshift-space distortions in the clustering of the PDR-2 final sample

Science.gov (United States)

Pezzotta, A.; de la Torre, S.; Bel, J.; Granett, B. R.; Guzzo, L.; Peacock, J. A.; Garilli, B.; Scodeggio, M.; Bolzonella, M.; Abbas, U.; Adami, C.; Bottini, D.; Cappi, A.; Cucciati, O.; Davidzon, I.; Franzetti, P.; Fritz, A.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marulli, F.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Arnouts, S.; Branchini, E.; Coupon, J.; De Lucia, G.; Koda, J.; Ilbert, O.; Mohammad, F.; Moutard, T.; Moscardini, L.

2017-07-01

We present measurements of the growth rate of cosmological structure from the modelling of the anisotropic galaxy clustering measured in the final data release of the VIPERS survey. The analysis is carried out in configuration space and based on measurements of the first two even multipole moments of the anisotropic galaxy auto-correlation function, in two redshift bins spanning the range 0.5 rate with negligible bias down to separations of 5 h-1 Mpc. Interestingly, the application to real data shows a weaker sensitivity to the details of non-linear RSD corrections compared to mock results. We obtain consistent values for the growth rate times the matter power spectrum normalisation parameter of fσ8 = 0.55 ± 0.12 and 0.40 ± 0.11 at effective redshifts of z = 0.6 and z = 0.86 respectively. These results are in agreement with standard cosmology predictions assuming Einstein gravity in a ΛCDM background. Based on observations collected at the European Southern Observatory, Cerro Paranal, Chile, using the Very Large Telescope under programs 182.A-0886 and partly 070.A-9007. Also based on observations obtained with MegaPrime/MegaCam, a joint project of CFHT and CEA/DAPNIA, at the Canada-France-Hawaii Telescope (CFHT), which is operated by the National Research Council (NRC) of Canada, the Institut National des Sciences de l'Univers of the Centre National de la Recherche Scientifique (CNRS) of France, and the University of Hawaii. This work is based in part on data products produced at TERAPIX and the Canadian Astronomy Data Centre as part of the Canada-France-Hawaii Telescope Legacy Survey, a collaborative project of NRC and CNRS. The VIPERS web site is http://www.vipers.inaf.it/

Single Interdigital Transducer Approach for Gravimetrical SAW Sensor Applications in Liquid Environments

Directory of Open Access Journals (Sweden)

Vu Hoa Nguyen

2017-12-01

Full Text Available Surface acoustic wave (SAW devices are well known for mass-sensitive sensor applications. In biosensing applications, chemical and biochemically evoked binding processes on surfaces are detected in liquid environments using delay line or resonator sensor configurations, preferably in combination with the appropriate microfluidic devices. All configurations share the common feature of analyzing the transmission characteristic of the propagating SAW. In this paper, a novel SAW-based impedance sensor type is introduced which uses only one interdigital transducer (IDT, simultaneously as the SAW generator and the sensor element. Here, the input port reflection coefficient S11 is measured at the IDT instead of the commonly used S21 transmission forward gain parameter. Thus, a sharp and distinct peak of the S11 spectrum is obtained, enabling a comfortable direct readout of the sensor signal. Proof of the concept was gained by analyzing the specific binding of the 4-mercaptophenylacetic acid gold nanoparticles (MPA–AuNP directly to the IDT surface. The corresponding binding kinetic of the MPA–AuNP on the functionalized gold surface has been analyzed and a sensitivity of 7.4 mΩ nM−1 has been determined.

Comparison AHP and SAW to promotion of head major department SMK Muhammadiyah 04 Medan

Science.gov (United States)

Saputra, M.; Sitompul, O. S.; Sihombing, P.

2018-04-01

Decision Support System (DSS) is a system that can help a person to make informed decisions about various types of choices that are performed accurately and in accordance with the desired goals. Many problems can be solved by using decision support systems. In this journal the decision support system is used to assist the Chief of Muhammadiyah Medan branch in the selection of the department chief. The criteria used for the election of department chiefs are: Loyalty, Job Performance, Responsibility, Obedience, Honesty, Cooperation, Education, and Leadership. The selection promotion process consists of Analytical Hierarchy Process (AHP) and Simple Additive Weighting (SAW) methods. The data were obtained through teacher assessment questionnaires by principals and colleagues. The results of this study used a comparison with two decision methods namely SAW method and AHP method so that the decision maker (principal) is more appropriate in the determination of candidates who will be elected head of department at school. The final result of this research is the first rank obtained by muhammad musa with weight value on AHP method (0.274) and weight value on SAW method (0.993), alvin syahrin with weight value on AHP method (0.241) and weight value on SAW method (0.883), noviyanti with weight value on AHP method (0.193) and weight value on SAW method (0.707). So the conclusion on the research that is by using SAW method the value of weight produced more accurate.

The frequency and level of sweep in mixed hardwood saw logs in the eastern United States

Science.gov (United States)

Peter Hamner; Marshall S. White; Philip A. Araman

2007-01-01

Hardwood sawmills traditionally saw logs in a manner that either orients sawlines parallel to the log central axis (straight sawing) or the log surface (allowing for taper). Sweep is characterized as uniform curvature along the entire length of a log. For logs with sweep, lumber yield losses from straight and taper sawing increase with increasing levels of sweep. Curve...

Early development of rostrum saw-teeth in a fossil ray tests classical theories of the evolution of vertebrate dentitions.

Science.gov (United States)

Smith, Moya Meredith; Riley, Alex; Fraser, Gareth J; Underwood, Charlie; Welten, Monique; Kriwet, Jürgen; Pfaff, Cathrin; Johanson, Zerina

2015-10-07

In classical theory, teeth of vertebrate dentitions evolved from co-option of external skin denticles into the oral cavity. This hypothesis predicts that ordered tooth arrangement and regulated replacement in the oral dentition were also derived from skin denticles. The fossil batoid ray Schizorhiza stromeri (Chondrichthyes; Cretaceous) provides a test of this theory. Schizorhiza preserves an extended cartilaginous rostrum with closely spaced, alternating saw-teeth, different from sawfish and sawsharks today. Multiple replacement teeth reveal unique new data from micro-CT scanning, showing how the 'cone-in-cone' series of ordered saw-teeth sets arrange themselves developmentally, to become enclosed by the roots of pre-existing saw-teeth. At the rostrum tip, newly developing saw-teeth are present, as mineralized crown tips within a vascular, cartilaginous furrow; these reorient via two 90° rotations then relocate laterally between previously formed roots. Saw-tooth replacement slows mid-rostrum where fewer saw-teeth are regenerated. These exceptional developmental data reveal regulated order for serial self-renewal, maintaining the saw edge with ever-increasing saw-tooth size. This mimics tooth replacement in chondrichthyans, but differs in the crown reorientation and their enclosure directly between roots of predecessor saw-teeth. Schizorhiza saw-tooth development is decoupled from the jaw teeth and their replacement, dependent on a dental lamina. This highly specialized rostral saw, derived from diversification of skin denticles, is distinct from the dentition and demonstrates the potential developmental plasticity of skin denticles. © 2015 The Authors.

Cross-recognition of a pit viper (Crotalinae) polyspecific antivenom explored through high-density peptide microarray epitope mapping

DEFF Research Database (Denmark)

Engmark, Mikael; Lomonte, Bruno; Gutiérrez, José María

2017-01-01

Snakebite antivenom is a 120 years old invention based on polyclonal mixtures of antibodies purified from the blood of hyper-immunized animals. Knowledge on antibody recognition sites (epitopes) on snake venom proteins is limited, but may be used to provide molecular level explanations...... for antivenom cross-reactivity. In turn, this may help guide antivenom development by elucidating immunological biases in existing antivenoms. In this study, we have identified and characterized linear elements of B-cell epitopes from 870 pit viper venom protein sequences by employing a high......-throughput methodology based on custom designed high-density peptide microarrays. By combining data on antibody-peptide interactions with multiple sequence alignments of homologous toxin sequences and protein modelling, we have determined linear elements of antibody binding sites for snake venom metalloproteases (SVMPs...

DETERMINATION OF CRITICAL ROTATIONAL SPEED OF CIRCULAR SAWS FROM NATURAL FREQUENCIES OF ANNULAR PLATE WITH ANALOGOUS DIMENSIONS

Directory of Open Access Journals (Sweden)

Ante Skoblar

2016-03-01

Full Text Available It is suitable to reduce thickness of circular saw when trying to enhance usability of wood raw material, but reducing thickness also causes reduction of permissible rotational speed which reduces sawing speed. If one increase circular saw rotational speed over permissible one the quality of machined surfaces will reduce because of enhanced vibrations. Permissible rotational speed can be calculated from critical rotational speed which can be defined from natural frequencies of the saw. In this article critical rotational speeds of standard clamped saws (with flat disk surface and without slots are calculated by using finite element method and classical theory of thin plates on annular plates. Mode shapes and natural frequencies of annular plates are determined by using Bessel functions and by using polynomial functions. Obtained results suggest that standard clamped circular saws without slots and with relatively small teeth can be determined from classical theory of thin plates for annular plates with accuracy depending on clamping ratio.

INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - ADAMANT CIRCULAR SAW OENHP NUMBER: 2001-05, VERSION A

International Nuclear Information System (INIS)

2002-01-01

Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting up specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactive contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The Adamant circular saw was assessed on August 14, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Adamant was only used during a limited ''test'' on a regular plywood crate due to safety considerations of the tool for this application. The Adamant circular saw, a counter-rotating twin-cutter, constructed with blades that work differently than conventional cutting wheels with twin blades, each rotating in opposite directions. It is used to cut wood and metals. Each blade is approximately 8 3/4 inches in diameter with a maximum cutting depth of 2 1/2 inches. The machine has two rotation speeds: 1,900 and 2,900 rotations per minute (rpm). The saw is operated with an interlocked, guarded trigger switch located at the end of the saw opposite the cutting blades. To operate the saw, the safety interlock must be depressed prior to powering the saw with the trigger control. The saw is supported by a handle at the front of the saw near the cutting blades. The top part of the blades is guarded near the handle, with approximately three-fourths of the face of the blades exposed. The Adamant circular saw is an innovative technology used to cut metals and wood. Its safety features include: interlocking switch for powering the saw, overload indicator and shutoff, and an electronic brake that stops the engine immediately when the start button is released. The top part of the blades is guarded near the motor. With approximately three-fourths of the face of the blades

Passive Wireless SAW Humidity Sensors and System, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Phase I demonstrated the technical feasibility of creating surface acoustic wave (SAW) based humidity sensors that respond rapidly (under 0.5 second) and reversibly...

The saw-tooth sign as a clinical clue for intrathoracic central airway obstruction

Directory of Open Access Journals (Sweden)

Nakajima Akira

2012-07-01

Full Text Available Abstract Background The saw-tooth sign was first described by Sanders et al in patients with obstructive sleep apnea syndrome as one cause of extrathoracic central airway obstruction. The mechanism of the saw-tooth sign has not been conclusively clarified. The sign has also been described in various extrathoracic central airway diseases, such as in burn victims with thermal injury to the upper airways, Parkinson’s disease, tracheobronchomalacia, laryngeal dyskinesia, and pedunculated tumors of the upper airway. Case presentation A 61-year-old man was referred to our hospital with a two-month history of persistent dry cough and dyspnea. He was diagnosed with lung cancer located in an intrathoracic central airway, which was accompanied by the saw-tooth sign on flow-volume loops. This peculiar sign repeatedly improved and deteriorated, in accordance with the waxing and waning of central airway stenosis by anti-cancer treatments. Conclusion This report suggests that the so-called saw-tooth sign may be found even in intrathoracic central airway obstruction due to lung cancer.

Properties of concrete modified with waste Low Density Polyethylene and saw dust ash

Science.gov (United States)

Srimanikandan, P.; Sreenath, S.

2017-07-01

The increase in industrialization creates need for disposal of large quantity of by-products. To overcome the difficulty of disposal, these by-products can be used as a replacement for raw material. In this concern, non-conventional industrial wastes such as plastic bags, PET bottles, pulverized waste Low Density Polyethylene (LDPE) and biological waste such as saw-dust ash, coconut coir were used as a replacement in concrete. In this project, saw-dust ash and pulverized waste LDPE were introduced as the partial replacement for cement and fine aggregates respectively. 0%, 5%, 10%, 15% and 20% of sand by volume was replaced with LDPE and 0%, 1%, 3%, 5% and 10% of cement by volume was replaced with saw dust ash. Standard cube, cylinder and prism specimens were cast to assess the compressive strength, split tensile strength and flexural strength of modified concrete after 28 days of curing. Optimum percentage of replacement was found by comparing the test results. The mix with 5% of LDPE and 3% of saw dust ash showed a better result among the other mixes.

High-performance circular sawing of AISI 1045 steel with cermet and tungsten carbide inserts

International Nuclear Information System (INIS)

Abrao, A. M.; Rubio, J. C. Campos; Moreira, C.; Faria, P. E.

2014-01-01

This work investigated the influence of cutting speed and feed rate on cutting forces, surface roughness, and slot width circular sawing of AISI 1045 steel. The effects of tool material (cermet and tungsten carbide) and geometry (chip breaker flute and pre-cutting/postcutting teeth) were also investigated. Thrust and radial forces generally tended to decrease as the cutting speed increased and tended to increase with the feed rate. The lowest values of thrust and radial forces were obtained using a tungsten carbide saw ground with precutting and post-cutting teeth. With regard to the quality of the machined wall, the lowest surface roughness was obtained by applying the highest cutting speed and lowest feed rate and employing a cermet brazed saw. Under this condition, roughness values comparable to face turning and parting off operations were obtained. The cermet brazed saw was responsible for producing the narrowest slot widths.

Silicon diode measurements for monoenergetic neutrons and critical assemblies (H.P.R.R. and VIPER)

International Nuclear Information System (INIS)

Delafield, H.J.; Reading, A.H.

1981-04-01

The response of the silicon diode (AEI FNDD1) has been measured for monoenergetic neutrons of mean energies 0.56, 2.00 and 3.68 MeV. Using conversion factors from neutron fluence to kerma (ICRU, 1977) it is shown that the theoretical kerma response in muscle tissue is substantially uniform (+- 20%) over the neutron energy range from 250 keV to 17 MeV. Diode measurements were made at the Health Physics Research Reactor at the Oak Ridge National Laboratory, Tennessee, U.S.A., during the 1979 international intercomparison of nuclear accident dosimetry systems. Measurements of kerma in free air and of the surface absorbed dose on the front surface of a phantom were made with the reactor bare, shielded by 20 cm concrete and by 5 cm steel. Further tests were made at the VIPER reactor at AWRE. These diode measurements, covering a range of neutron spectra, were in good agreement (+- 20%) with measurements made by the threshold detector system. (author)

SAW propagation characteristics of TeO3/3C-SiC/LiNbO3 layered structure

Science.gov (United States)

Soni, Namrata D.

2018-04-01

Surface acoustic wave (SAW) devices based on Lithium Niobate (LiNbO3) single crystal are advantageous because of its high SAW phase velocity, electromechanical coupling coefficient and cost effectiveness. In the present work a new multi-layered TeO3/3C-SiC/128° Y-X LiNbO3 SAW device has been proposed. SAW propagation properties such as phase velocity, coupling coefficient and temperature coefficient of delay (TCD) of the TeO3/SiC/128° Y-X LiNbO3 multi layered structure is examined using theoretical calculations. It is found that the integration of 0.09λ thick 3C-SiC over layer on 128° Y-X LiNbO3 increases its electromechanical coupling coefficient from 5.3% to 9.77% and SAW velocity from 3800 ms‑1 to 4394 ms‑1. The SiC/128° Y-X LiNbO3 bilayer SAW structure exhibits a high positive TCD value. A temperature stable layered SAW device could be obtained with introduction of 0.007λ TeO3 over layer on SiC/128° Y-X LiNbO3 bilayer structure without sacrificing the efficiency of the device. The proposed TeO3/3C-SiC/128° Y-X LiNbO3 multi-layered SAW structure is found to be cost effective, efficient, temperature stable and suitable for high frequency application in harsh environment.

Grading sugar pine saw logs in trees.

Science.gov (United States)

John W. Henley

1972-01-01

Small limbs and small overgrown limbs cause problems when grading saw logs in sugar pine trees. Surface characteristics and lumber recovery information for 426 logs from 64 sugar pine trees were examined. Resulting modifications in the grading specification that allow a grader to ignore small limbs and small limb indicators do not appear to decrease the performance of...

Comparison of piezosurgery and traditional saw in bimaxillary orthognathic surgery.

Science.gov (United States)

Spinelli, Giuseppe; Lazzeri, Davide; Conti, Marco; Agostini, Tommaso; Mannelli, Giuditta

2014-10-01

Investigators have hypothesised that piezoelectric surgical device could permanently replace traditional saws in conventional orthognathic surgery. Twelve consecutive patients who underwent bimaxillary procedures were involved in the study. In six patients the right maxillary and mandible osteotomies were performed using traditional saw, whilst the left osteotomies by piezoosteotomy; in the remaining six patients, the surgical procedures were reversed. Intraoperative blood loss, procedure duration time, incision precision, postoperative swelling and haematoma, and nerve impairment were evaluated to compare the outcomes and costs of these two procedures. Compare to traditional mechanical surgery, piezoosteotomy showed a significant intraoperative blood loss reduction of 25% (p = 0.0367), but the mean surgical procedure duration was longer by 35% (p = 0.0018). Moreover, the use of piezoosteotomy for mandible procedure required more time than for the maxillary surgery (p = 0.0003). There was a lower incidence of postoperative haematoma and swelling following piezoosteotomy, and a statistically significant reduction in postoperative nerve impairment (p = 0.003). We believe that piezoelectric device allows surgeons to achieve better results compared to a traditional surgical saw, especially in terms of intraoperative blood loss, postoperative swelling and nerve impairment. This device represents a less aggressive and safer method to perform invasive surgical procedures such as a Le Fort I osteotomy. However, we recommend the use of traditional saw in mandible surgery because it provides more foreseeable outcomes and well-controlled osteotomy. Further studies are needed to analyse whether piezoosteotomy could prevent relapse and promote bony union in larger advancements. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Effect of increasing doses of saw palmetto extract on lower urinary tract symptoms: a randomized trial.

Science.gov (United States)

Barry, Michael J; Meleth, Sreelatha; Lee, Jeannette Y; Kreder, Karl J; Avins, Andrew L; Nickel, J Curtis; Roehrborn, Claus G; Crawford, E David; Foster, Harris E; Kaplan, Steven A; McCullough, Andrew; Andriole, Gerald L; Naslund, Michael J; Williams, O Dale; Kusek, John W; Meyers, Catherine M; Betz, Joseph M; Cantor, Alan; McVary, Kevin T

2011-09-28

Saw palmetto fruit extracts are widely used for treating lower urinary tract symptoms attributed to benign prostatic hyperplasia (BPH); however, recent clinical trials have questioned their efficacy, at least at standard doses (320 mg/d). To determine the effect of saw palmetto extract (Serenoa repens, from saw palmetto berries) at up to 3 times the standard dose on lower urinary tract symptoms attributed to BPH. A double-blind, multicenter, placebo-controlled randomized trial at 11 North American clinical sites conducted between June 5, 2008, and October 10, 2010, of 369 men aged 45 years or older, with a peak urinary flow rate of at least 4 mL/s, an American Urological Association Symptom Index (AUASI) score of between 8 and 24 at 2 screening visits, and no exclusions. One, 2, and then 3 doses (320 mg/d) of saw palmetto extract or placebo, with dose increases at 24 and 48 weeks. Difference in AUASI score between baseline and 72 weeks. Secondary outcomes included measures of urinary bother, nocturia, peak uroflow, postvoid residual volume, prostate-specific antigen level, participants' global assessments, and indices of sexual function, continence, sleep quality, and prostatitis symptoms. Between baseline and 72 weeks, mean AUASI scores decreased from 14.42 to 12.22 points (-2.20 points; 95% CI, -3.04 to -1.36) [corrected]with saw palmetto extract and from 14.69 to 11.70 points (-2.99 points; 95% CI, -3.81 to -2.17) with placebo. The group mean difference in AUASI score change from baseline to 72 weeks between the saw palmetto extract and placebo groups was 0.79 points favoring placebo (upper bound of the 1-sided 95% CI most favorable to saw palmetto extract was 1.77 points, 1-sided P = .91). Saw palmetto extract was no more effective than placebo for any secondary outcome. No clearly attributable adverse effects were identified. Increasing doses of a saw palmetto fruit extract did not reduce lower urinary tract symptoms more than placebo. clinicaltrials

Wire sawing for the application for dismantling of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Toenshoff, H.K.; Hillmann-Apmann, H. [Hannover Univ. (Germany). Inst. for Production Engineering and Machine Tools

2001-07-01

In recent years diamond wire sawing process has been established as a technique for machining of hard and brittle materials in the quarrying and dimensioning of natural stone, i.e. marble and granite /Bor94/, or in machining of concrete and reinforced concrete /NN89, NN90, Rus93, Zil89/. It is more and more applied in different industrial sectors, namely the building and road-building industry, for purposes of reconstruction and decommissioning/. For the application of cutting austenitic steel most of the current wire sawing tools can not be used. First the diamond get in chemical reaction with the steel (graphitisation) and also the plastic flow of the workpiece material (''smearing'') while processing this material, the chip spaces between the diamonds are filled with the steel chips and thus the effective processing is reduced. Only the very tips of the diamonds are in contact with the workpiece, which leads in most cases to rapid wear of the grains. The tool loses its ability to grind in short terms of time. All these problems exclude the wire sawing technique from wide areas of application of cutting ductile steel materials. (orig.)

Wire sawing for the application for dismantling of nuclear facilities

International Nuclear Information System (INIS)

Toenshoff, H.K.; Hillmann-Apmann, H.

2001-01-01

In recent years diamond wire sawing process has been established as a technique for machining of hard and brittle materials in the quarrying and dimensioning of natural stone, i.e. marble and granite /Bor94/, or in machining of concrete and reinforced concrete /NN89, NN90, Rus93, Zil89/. It is more and more applied in different industrial sectors, namely the building and road-building industry, for purposes of reconstruction and decommissioning/. For the application of cutting austenitic steel most of the current wire sawing tools can not be used. First the diamond get in chemical reaction with the steel (graphitisation) and also the plastic flow of the workpiece material (''smearing'') while processing this material, the chip spaces between the diamonds are filled with the steel chips and thus the effective processing is reduced. Only the very tips of the diamonds are in contact with the workpiece, which leads in most cases to rapid wear of the grains. The tool loses its ability to grind in short terms of time. All these problems exclude the wire sawing technique from wide areas of application of cutting ductile steel materials. (orig.)

Saw palmetto extracts potently and noncompetitively inhibit human alpha1-adrenoceptors in vitro.

Science.gov (United States)

Goepel, M; Hecker, U; Krege, S; Rübben, H; Michel, M C

1999-02-15

We wanted to test whether phytotherapeutic agents used in the treatment of lower urinary tract symptoms have alpha1-adrenoceptor antagonistic properties in vitro. Preparations of beta-sitosterol and extracts of stinging nettle, medicinal pumpkin, and saw palmetto were obtained from several pharmaceutical companies. They were tested for their ability to inhibit [3H]tamsulosin binding to human prostatic alpha1-adrenoceptors and [3H]prazosin binding to cloned human alpha1A- and alpha1B-adrenoceptors. Inhibition of phenylephrine-stimulated [3H]inositol phosphate formation by cloned receptors was also investigated. Up to the highest concentration which could be tested, preparations of beta-sitosterol, stinging nettle, and medicinal pumpkin were without consistent inhibitory effect in all assays. In contrast, all tested saw palmetto extracts inhibited radioligand binding to human alpha1-adrenoceptors and agonist-induced [3H]inositol phosphate formation. Saturation binding experiments in the presence of a single saw palmetto extract concentration indicated a noncompetitive antagonism. The relationship between active concentrations in vitro and recommended therapeutic doses for the saw palmetto extracts was slightly lower than that for several chemically defined alpha1-adrenoceptor antagonists. Saw palmetto extracts have alpha1-adrenoceptor-inhibitory properties. If bioavailability and other pharmacokinetic properties of these ingredients are similar to those of the chemically defined alpha1-adrenoceptor antagonists, alpha1-adrenoceptor antagonism might be involved in the therapeutic effects of these extracts in patients with lower urinary tract symptoms suggestive of benign prostatic obstruction.

Robust Design of SAW Gas Sensors by Taguchi Dynamic Method

Directory of Open Access Journals (Sweden)

Hsun-Heng Tsai

2009-02-01

Full Text Available This paper adopts Taguchi’s signal-to-noise ratio analysis to optimize the dynamic characteristics of a SAW gas sensor system whose output response is linearly related to the input signal. The goal of the present dynamic characteristics study is to increase the sensitivity of the measurement system while simultaneously reducing its variability. A time- and cost-efficient finite element analysis method is utilized to investigate the effects of the deposited mass upon the resonant frequency output of the SAW biosensor. The results show that the proposed methodology not only reduces the design cost but also promotes the performance of the sensors.

Phylogeny and diversification of mountain vipers (Montivipera, Nilson et al., 2001) triggered by multiple Plio-Pleistocene refugia and high-mountain topography in the Near and Middle East.

Science.gov (United States)

Stümpel, Nikolaus; Rajabizadeh, Mehdi; Avcı, Aziz; Wüster, Wolfgang; Joger, Ulrich

2016-08-01

The Near and Middle East is a hotspot of biodiversity, but the region remains underexplored at the level of genetic biodiversity. Here, we present an extensive molecular phylogeny of the viperid snake genus Montivipera, including all known taxa. Based on nuclear and mitochondrial data, we present novel insights into the phylogeny of the genus and review the status of its constituent species. Maximum likelihood methods revealed a montane origin of Montivipera at 12.3Mya. We then analyzed factors of mountain viper diversity. Our data support substantial changes in effective population size through Plio-Pleistocene periods. We conclude that climatic oscillations were drivers of allopatric speciation, and that mountain systems of the Near and Middle East have strongly influenced the evolution and survival of taxa, because climatic and topographical heterogeneities induced by mountains have played a crucial role as filters for dispersal and as multiple refugia. The wide diversity of montane microhabitats enabled mountain vipers to retain their ecological niche during climatic pessima. In consequence the varied geological and topographical conditions between refugia favoured genetic isolation and created patterns of species richness resulting in the formation of neoendemic taxa. Our data support high concordance between geographic distributions of Montivipera haplotypes with putative plant refugia. Copyright © 2016. Published by Elsevier Inc.

Neutralisation of Local Haemorrhage Induced by the Saw-Scaled Viper Echis carinatus sochureki Venom Using Ethanolic Extract of Hibiscus aethiopicus L.

Directory of Open Access Journals (Sweden)

S. S. Hasson

2012-01-01

Full Text Available The objective of the study is to investigate the anti-snake venom activities of a local plant, Hibiscus aethiopicus L. The H. aethiopicus was dried and extracted with ethanol. Different assays were performed according to standard techniques, to evaluate the plant’s acute toxicity and its antivenom activities. The results of evaluating the systemic acute toxicity of the H. aethiopicus extract using “oral and intra-peritoneal” route were normal even at the highest dose (24 g/kg tested. All guinea pigs (n=3 when treated with venoms E. c. sochureki (75 μg alone induced acute skin haemorrhage. In contrast, all guinea pigs (n=18 treated with both venom and the plant extract at a concentration between 500 and 1000 mg/kg showed no signs of haemorrhage. Moreover, all guinea pigs (n=18 treated with venom and the plant extract below 400 mg/kg showed acute skin haemorrhage. All guinea pigs treated with venom E. c. sochureki (75 μg alone induced acute skin haemorrhage after both 24 and 32 hours. In contrast, all guinea pigs treated with both venom and the plant extract (administered independently at concentrations between 500 and 1000 mg/kg showed no signs of haemorrhage after 32 hours. However, after 24 hours all tested guinea pigs showed less inhibition (<60% compared to that obtained after 32 hours. The outcome of this study reflects that the extract of H. aethiopicus plant may contain an endogenous inhibitor of venom induced local haemorrhage.

Is there a see-saw over an ice-free Arctic Ocean?

Science.gov (United States)

Stendel, Martin; Yang, Shuting; Langen, Peter; Rodehacke, Christian; Mottram, Ruth; Hesselbjerg Christensen, Jens

2017-04-01

The "see-saw" in winter temperatures between western Greenland and the Canadian Arctic on one side and northern Europe on the other has been described by Loewe already in 1937, but actually this behaviour was at least known since the Danish colonization of Greenland in the early 18th century. The see-saw is associated with pressure anomalies not only near the region of interest, but as remote as the Mediterranean and the North Pacific. Recent research has pointed out the role of sea ice in maintaining the see-saw in either its warm or its cold phase over extended periods, which strongly affects European winter temperatures. What would happen to the seesaw if Arctic sea ice were to disappear suddenly? In the framework of the FP7-funded project ice2ice, we try to answer this and related questions. We have conducted a very long global simulation with a global climate model interactively coupled to a Greenland ice sheet component, covering the period 1850-3250 at a horizontal resolution of approximately 125 km. Up to 2005, the forcing is from observed greenhouse gas concentrations, and from 2006 onward it follows the extended RCP8.5 scenario, in which greenhouse gas concentrations continue to increase and eventually level out around 2250. With such a strong forcing, all Arctic sea ice has completely disappeared by roughly the same time, and the surface mass balance of the Greenland Ice Sheet becomes strongly negative. We investigate how the see-saw behaves in such an ice-free world and which implications circulation changes have in the Arctic and over Europe. To further elucidate the role of sea ice distribution on the atmospheric flow and the role of surface fluxes in maintaining the Greenland-European see-saw, we intend at a later time to expand our analysis to include a contrasting simulation with both western Greenland and northern Europe covered by ice during the Last Glacier Maximum.

Comparison of setting time measured using ultrasonic wave propagation with saw-cutting times on pavements.

Science.gov (United States)

2015-10-01

At present, there is little fundamental guidance available to assist contractors in choosing when to schedule saw cuts on joints. To : conduct pavement finishing and sawing activities effectively, however, contractors need to know when a concrete mix...

Modelling Sawing of Metal Tubes Through FEM Simulation

International Nuclear Information System (INIS)

Bort, C. M. Giorgio; Bosetti, P.; Bruschi, S.

2011-01-01

The paper presents the development of a numerical model of the sawing process of AISI 304 thin tubes, which is cut through a circular blade with alternating roughing and finishing teeth. The numerical simulation environment is the three-dimensional FEM software Deform v.10.1. The teeth actual trajectories were determined by a blade kinematics analysis developed in Matlab. Due to the manufacturing rolling steps and subsequent welding stage, the tube material is characterized by a gradient of properties along its thickness. Consequently, a simplified cutting test was set up and carried out in order to identify the values of relevant material parameters to be used in the numerical model. The dedicated test was the Orthogonal Tube Cutting test (OTC), which was performed on an instrumented lathe. The proposed numerical model was validated by comparing numerical results and experimental data obtained from sawing tests carried out on an industrial machine. The following outputs were compared: the cutting force, the chip thickness, and the chip contact area.

Modelling Sawing of Metal Tubes Through FEM Simulation

Science.gov (United States)

Bort, C. M. Giorgio; Bosetti, P.; Bruschi, S.

2011-05-01

The paper presents the development of a numerical model of the sawing process of AISI 304 thin tubes, which is cut through a circular blade with alternating roughing and finishing teeth. The numerical simulation environment is the three-dimensional FEM software Deform™ v.10.1. The teeth actual trajectories were determined by a blade kinematics analysis developed in Matlab™. Due to the manufacturing rolling steps and subsequent welding stage, the tube material is characterized by a gradient of properties along its thickness. Consequently, a simplified cutting test was set up and carried out in order to identify the values of relevant material parameters to be used in the numerical model. The dedicated test was the Orthogonal Tube Cutting test (OTC), which was performed on an instrumented lathe. The proposed numerical model was validated by comparing numerical results and experimental data obtained from sawing tests carried out on an industrial machine. The following outputs were compared: the cutting force, the chip thickness, and the chip contact area.

Large and almost maximal neutrino mixing within the type II see-saw mechanism

International Nuclear Information System (INIS)

Lindner, Manfred; Rodejohann, Werner

2007-01-01

Within the type II see-saw mechanism the light neutrino mass matrix is given by a sum of a direct (or triplet) mass term and the conventional (type I) see-saw term. Both versions of the see-saw mechanism explain naturally small neutrino masses, but the type II scenario offers interesting additional possibilities to explain large or almost maximal or vanishing mixings which are discussed in this paper. We first introduce 'type II enhancement' of neutrino mixing, where moderate cancellations between the two terms can lead to large neutrino mixing even if all individual mass matrices and terms generate small mixing. However, nearly maximal or vanishing mixings are not naturally explained in this way, unless there is a certain initial structure (symmetry) which enforces certain elements of the matrices to be identical or related in a special way. We therefore assume that the leading structure of the neutrino mass matrix is the triplet term and corresponds to zero U e3 and maximal θ 23 . Small but necessary corrections are generated by the conventional see-saw term. Then we assume that one of the two terms corresponds to an extreme mixing scenario, such as bimaximal or tri-bimaximal mixing. Deviations from this scheme are introduced by the second term. One can mimic Quark-Lepton Complementarity in this way. Finally, we note that the neutrino mass matrix for tri-bimaximal mixing can be-depending on the mass hierarchy-written as a sum of two terms with simple structure. Their origin could be the two terms of type II see-saw

Evaluation of saw palmetto for biomass potential

Energy Technology Data Exchange (ETDEWEB)

Pitman, W.D. (Florida Univ., Ona, FL (United States). Agricultural Research Center)

1993-01-01

Saw palmetto is a widely distributed shrubby monocot (palm) which occurs in dense stands in the coastal region of the southern USA. Selected areas of an existing stand in peninsular Florida were subjected to harvest intervals of 6, 12, and 24 months, with season of harvest also evaluated. Annual yields were 2-3 Mg ha[sup -1] of foliage (fronds and petioles) dry matter. A quadratic response to harvest interval was obtained with annual foliage regrowth greatest at the 12-month interval. Plant vigour, as indicated by total non-structural carbohydrate (TNC) concentration, and yield per harvest increased linearly with increasing harvest interval. Chemical analyses revealed high extractive content, with 100 mg g[sup -1] ethanol-benzene extract plus 90 mg g[sup -1] ethanol extract. Lignin concentration was also high at 180 mg g[sup -1]. The relatively low biomass yields and high concentrations of extractives and lignin indicate that saw palmetto does not have the desired characteristics for biomass energy conversion. Some potential may exist for specialty uses, such as starter fuel for waste combustion, due to availability and a highly combustible nature produced by the high extractive content. (author)

PROVENANCE SNAKES OF GENUS Bothrops AND Crotalus (VIPERIDAE CATALOGED IN SERPENTARIUM ZOO UNIVERSITY OF CAXIAS DO SUL (UCS

Directory of Open Access Journals (Sweden)

Ezequiel Capeletti

2016-09-01

Full Text Available Snakes are reptiles that have large environmental adaptations, which favored it's distribution among the various ecosystems. In Brazil, there are found 392 species of snakes, while in Rio Grande do Sul (RS, this research field, 79 species have been described, of which there is the Viperidae family. The objective of this work is to verify the origin of snakes of genus Bothrops and Crotalus, according to the records of the last 15 years of the serpentarium the University of Caxias do Sul, representing the first survey in captivity of the northeastern region of RS. By extension, we seek to investigate whether there is a relationship between the amount of snakes records and abiotic factors: precipitation, temperature and humidity during the period. The research was developed at UCS's serpentarium, by documental analysis of notebook records describing serpents entries between the years 2000 and 2014, in addition to literature review that helped to understand the distribution of the species and gather of the environmental parameters at the Instituto Nacional de Metereologia for further analysis. It was found that the received species are distributed in 26 cities in the RS state, of which the highlights are the municities of Nova Petrópolis and Caxias do Sul, with 148 and 42 individuals respectively. Further, it was found that there was no relationship between the amount of animals and registered temperature, precipitation and humidity. Keywords: Geographic distribution; Bothrops; Crotalus; abiotic factors; northeastern RS.

Development of a Hydrogen Gas Sensor Using a Double Saw Resonator System at Room Temperature

Directory of Open Access Journals (Sweden)

Zainab Yunusa

2015-02-01

Full Text Available A double SAW resonator system was developed as a novel method for gas sensing applications. The proposed system was investigated for hydrogen sensing. Commercial Surface Acoustic Wave (SAW resonators with resonance frequencies of 433.92 MHz and 433.42 MHz were employed in the double SAW resonator system configuration. The advantages of using this configuration include its ability for remote measurements, and insensitivity to vibrations and other external disturbances. The sensitive layer is composed of functionalized multiwalled carbon nanotubes and polyaniline nanofibers which were deposited on pre-patterned platinum metal electrodes fabricated on a piezoelectric substrate. This was mounted into the DSAWR circuit and connected in parallel. The sensor response was measured as the difference between the resonance frequencies of the SAW resonators, which is a measure of the gas concentration. The sensor showed good response towards hydrogen with a minimum detection limit of 1%.

Machine Shop I. Learning Activity Packets (LAPs). Section D--Power Saws and Drilling Machines.

Science.gov (United States)

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains two learning activity packets (LAPs) for the "power saws and drilling machines" instructional area of a Machine Shop I course. The two LAPs cover the following topics: power saws and drill press. Each LAP contains a cover sheet that describes its purpose, an introduction, and the tasks included in the LAP; learning…

Treatment assignment guesses by study participants in a double-blind dose escalation clinical trial of saw palmetto.

Science.gov (United States)

Lee, Jeannette Y; Moore, Page; Kusek, John; Barry, Michael

2014-01-01

This report assesses participant perception of treatment assignment in a randomized, double-blind, placebo-controlled trial of saw palmetto for the treatment of benign prostatic hyperplasia (BCM). Participants randomized to receive saw palmetto were instructed to take one 320 mg gelcap daily for the first 24 weeks, two 320 mg gelcaps daily for the second 24 weeks, and three 320 mg gelcaps daily for the third 24 weeks. Study participants assigned to placebo were instructed to take the same number of matching placebo gelcaps in each time period. At 24, 48, and 72 weeks postrandomization, the American Urological Association Symptom Index (AUA-SI) was administered and participants were asked to guess their treatment assignment. The study was conducted at 11 clinical centers in North America. Study participants were men, 45 years and older, with moderate to low severe BPH symptoms, randomized to saw palmetto (N=151) or placebo (N=155). Treatment arms were compared with respect to the distribution of participant guesses of treatment assignment. For participants assigned to saw palmetto, 22.5%, 24.7%, and 29.8% correctly thought they were taking saw palmetto, and 37.3%, 40.0%, and 44.4% incorrectly thought they were on placebo at 24, 48, and 72 weeks, respectively. For placebo participants, 21.8%, 27.4%, and 25.2% incorrectly thought they were on saw palmetto, and 41.6%, 39.9%, and 42.6% correctly thought they were on placebo at 24, 48, and 72 weeks, respectively. The treatment arms did not vary with respect to the distributions of participants who guessed they were on saw palmetto (p=0.823) or placebo (p=0.893). Participants who experienced an improvement in AUA-SI were 2.16 times more likely to think they were on saw palmetto. Blinding of treatment assignment was successful in this study. Improvement in BPH-related symptoms was associated with the perception that participants were taking saw palmetto.

CAMEX-3 JPL SURFACE ACOUSTIC WAVE (SAW) HYGROMETER V1

Data.gov (United States)

National Aeronautics and Space Administration — This CAMEX-3 Jet Propulsion Laboratory (JPL) Surface Acoustic Wave (SAW) Hygrometer dataset consists of dewpoint timeline measurements acquired during each DC-8...

Comparison of Saw Palmetto (extract and whole berry) and Cernitin on prostate growth in rats.

Science.gov (United States)

Talpur, Nadeem; Echard, Bobby; Bagchi, Debasis; Bagchi, Manashi; Preuss, Harry G

2003-08-01

Pharmaceuticals such as finasteride and alpha blockers are used to treat symptoms of benign prostatic hyperplasia (BPH) and are known to cause severe adverse reactions. Accordingly, a search for safer, natural products has been undertaken. Two natural agents (nutraceuticals) have come under recent scrutiny; because natural products, in general, often have evidence of long-term safety. The present study compares the in vivo effects on androgen-induced prostatic enlargement in rats of two nutraceuticals--the widely recognized Saw Palmetto (Serenoa repens) and the less well-known Cernitin (defined pollen extract). Non-castrated rats, had a mean prostate weight of 124 mg +/- 8.8 (S.E.M.) compared to the 24.5 mg +/- 1.9 (S.E.M.) of the castrated rat followed under the same regimen (p Saw Palmetto, crushed whole berry derived from Saw Palmetto fruit, a water soluble and fat soluble extract of Cernitin or a combination of the Saw Palmetto extract and Cernitin. All treatments decreased the size of the prostate to roughly the same size as in the non-castrated rats, a size that was significantly smaller than castrated rats treated with testosterone in the same manner (p Saw Palmetto (whole berry and extract) and Cernitin to influence prostatic hyperplasia via effects on androgen metabolism.

Inner tubes cutting method by electrical arc saw

International Nuclear Information System (INIS)

Thome, P.

1990-01-01

The research program deals on the definition of tools used for dismantling steam generator tubes bundle of PWR and on tool used for cutting pipes of great diameter by using the process of cutting by electrical arc saw. The remote tools are used for cutting by the interior pipes of contamined circuits [fr

Plasma turbulence driven by transversely large-scale standing shear Alfvén waves

International Nuclear Information System (INIS)

Singh, Nagendra; Rao, Sathyanarayan

2012-01-01

Using two-dimensional particle-in-cell simulations, we study generation of turbulence consisting of transversely small-scale dispersive Alfvén and electrostatic waves when plasma is driven by a large-scale standing shear Alfvén wave (LS-SAW). The standing wave is set up by reflecting a propagating LS-SAW. The ponderomotive force of the standing wave generates transversely large-scale density modifications consisting of density cavities and enhancements. The drifts of the charged particles driven by the ponderomotive force and those directly caused by the fields of the standing LS-SAW generate non-thermal features in the plasma. Parametric instabilities driven by the inherent plasma nonlinearities associated with the LS-SAW in combination with the non-thermal features generate small-scale electromagnetic and electrostatic waves, yielding a broad frequency spectrum ranging from below the source frequency of the LS-SAW to ion cyclotron and lower hybrid frequencies and beyond. The power spectrum of the turbulence has peaks at distinct perpendicular wave numbers (k ⊥ ) lying in the range d e −1 -6d e −1 , d e being the electron inertial length, suggesting non-local parametric decay from small to large k ⊥ . The turbulence spectrum encompassing both electromagnetic and electrostatic fluctuations is also broadband in parallel wave number (k || ). In a standing-wave supported density cavity, the ratio of the perpendicular electric to magnetic field amplitude is R(k ⊥ ) = |E ⊥ (k ⊥ )/|B ⊥ (k ⊥ )| ≪ V A for k ⊥ d e A is the Alfvén velocity. The characteristic features of the broadband plasma turbulence are compared with those available from satellite observations in space plasmas.

Wireless, Passive Encoded Saw Sensors and Communication Links, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — There are several objectives of this Phase I proposal. One major objective is to investigate SAW sensor embodiments for pressure and acceleration. Two approaches...

Modified impedance control for robotic saw cutting: Simulation and implementation in three degrees of freedom

International Nuclear Information System (INIS)

Kriikku, E.M.; Reynolds, D.L.; Carroll, J.J.; Dawson, D.M.

1993-01-01

The Savannah River Site (SRS) production and decommissioning operations produce solid radioactive transuranic (TRU) waste. This waste must be repackaged and sent to the Waste Isolation Pilot Plant (WIPP) for permanent disposal. The Savannah River Technology Center (SRTC) built a test facility to demonstrate simulated waste processing. The test facility use's a CIMCORP multi-axis robot system, a CIMROC trademark II robot controller, and an electric circular saw to remotely open and size reduce plywood crates. The robot can either be teleoperated using joysticks or autonomously controlled via the, CIMROC trademark II. Both methods are inadequate for circular saw cutting of plywood crates due to frequent saw blade binding. Blade binding results from the current commercial robot controller limitations. The limitations are overcome by incorporating additional sensor information into the existing controller structure. In this paper we utilize a force sensor and a frequency counter to implement a modified impedance controller which prevents saw blade binding

Detection, Identification, Location, and Remote Sensing Using SAW RFID Sensor Tags

Science.gov (United States)

Barton, Richard J.; Kennedy, Timothy F.; Williams, Robert M.; Fink, Patrick W.; Ngo, Phong H.

2009-01-01

The Electromagnetic Systems Branch (EV4) of the Avionic Systems Division at NASA Johnson Space Center in Houston, TX is studying the utility of surface acoustic wave (SAW) radiofrequency identification (RFID) tags for multiple wireless applications including detection, identification, tracking, and remote sensing of objects on the lunar surface, monitoring of environmental test facilities, structural shape and health monitoring, and nondestructive test and evaluation of assets. For all of these applications, it is anticipated that the system utilized to interrogate the SAW RFID tags may need to operate at fairly long range and in the presence of considerable multipath and multiple-access interference. Towards that end, EV4 is developing a prototype SAW RFID wireless interrogation system for use in such environments called the Passive Adaptive RFID Sensor Equipment (PARSED) system. The system utilizes a digitally beam-formed planar receiving antenna array to extend range and provide direction-of-arrival information coupled with an approximate maximum-likelihood signal processing algorithm to provide near-optimal estimation of both range and temperature. The system is capable of forming a large number of beams within the field of view and resolving the information from several tags within each beam. The combination of both spatial and waveform discrimination provides the capability to track and monitor telemetry from a large number of objects appearing simultaneously within the field of view of the receiving array. In this paper, we will consider the application of the PARSEQ system to the problem of simultaneous detection, identification, localization, and temperature estimation for multiple objects. We will summarize the overall design of the PARSEQ system and present a detailed description of the design and performance of the signal detection and estimation algorithms incorporated in the system. The system is currently configured only to measure temperature

Piezoelectric shunt damping of a circular saw blade with autonomous power supply for noise and vibration reduction

Science.gov (United States)

Pohl, Martin; Rose, Michael

2016-01-01

Circular saws are widespread tools for machining metal, wood or even ceramics. Due to the thin blade and excitation by the workpiece contact of the cutting edges, circular saws are prone to vibration and intense noise emission. Damping the blade will lower the hearing protection requirements of the users and possibly increase precision. Therefore a new damping concept for circular saw blades is presented in this paper. It is based on negative capacitance shunted piezoelectric transducers which are applied to the saw blade core. The required energy for the electronics is harvested from the rotation by a generator, so that no change of the machine tool is required. All components are integrated into an autonomous saw tool. Finally, the system is experimentally investigated without rotation, in idling and in cutting condition in a circular saw test stand in the Institute for Machine Tools and Production Engineering (IWF) at TU Braunschweig. The experimental investigation shows a good reduction of the vibration amplitude over a wide frequency range in the non-rotating condition. When rotating, the damping effect is lower and limited to some narrow frequency bands. The proposed reason for the reduced damping effect in rotating condition consists in the saturation of the electronic circuits due to the limited supply voltage capabilities.

Saw Palmetto Berry as a Treatment for BPH

Science.gov (United States)

Fagelman, Elliot; Lowe, Franklin C

2001-01-01

Phytotherapeutic agents are often prescribed in Europe for the treatment of benign prostatic hyperplasia with lower urinary tract symptoms and are commonly used in the United States in over-the-counter preparations. Saw palmetto berry is the most popular of these agents, and in vitro some studies suggest that liposterolic extract of the plant has antiandrogenic effects that inhibit the type 1 and type 2 isoenzymes of 5α-reductase; however there are no clinical studies that show any decrease in serum dihydrotestosterone or prostate-specific antigen. Its efficacy in the treatment of lower urinary tract symptoms has not been conclusively proven. Clinical efficacy was suggested by a meta-analysis of Permixon, a formulation of saw palmetto, but the meta-analysis was done on suboptimal studies. One trial supports the equivalency of Permixon to finasteride in treating moderate to severe symptoms of benign prostatic hyperplasia, with less decrease in sexual function. However, without a control/placebo arm, the actual efficacy of the agents cannot be determined. Other than occasional gastrointestinal upset, no other side effects have been reported. PMID:16985705

Assessing the utility of the Oxford Nanopore MinION for snake venom gland cDNA sequencing.

Science.gov (United States)

Hargreaves, Adam D; Mulley, John F

2015-01-01

Portable DNA sequencers such as the Oxford Nanopore MinION device have the potential to be truly disruptive technologies, facilitating new approaches and analyses and, in some cases, taking sequencing out of the lab and into the field. However, the capabilities of these technologies are still being revealed. Here we show that single-molecule cDNA sequencing using the MinION accurately characterises venom toxin-encoding genes in the painted saw-scaled viper, Echis coloratus. We find the raw sequencing error rate to be around 12%, improved to 0-2% with hybrid error correction and 3% with de novo error correction. Our corrected data provides full coding sequences and 5' and 3' UTRs for 29 of 33 candidate venom toxins detected, far superior to Illumina data (13/40 complete) and Sanger-based ESTs (15/29). We suggest that, should the current pace of improvement continue, the MinION will become the default approach for cDNA sequencing in a variety of species.

The capability of pulsed laser radiation for cutting band saws hardening

Directory of Open Access Journals (Sweden)

Marinin Evgeny

2017-01-01

Full Text Available The article deals with the possibilities of pulsed laser radiation for hardening the band saws. The regimes of pulsed laser hardening the band saws of 1 mm thick made of tool steel 9CrV are grounded theoretically and experimentally tested. Selected and justified modes of treatment harden in the autohardening mode without additional heat removal. The results of the experimental research of microhardness are presented and formed as a result of processing of the microstructure. Selected modes increase the microhardness of the surface to 8500 MPa and form ultra highly dispersed structure in the surface layer characterized by high resistance to abrasion.

Local saw mills save Velky Krtis

International Nuclear Information System (INIS)

Haluza, I.

2006-01-01

After the Bana Dolina coal mine has received its last state subsidy, the only major employer in the region will be the PRP saw mill. The unemployment rate is very high in the Velky Krtis region over 25%. Several agricultural and food processing companies have gone bankrupt and the Bana Dolina mine today only employs around 200 people. Few new jobs have been created. So far only furniture manufacturers from the Swedish company, Furni Finish, have promised the town they will open a new plant, where they may employ around 150. Another potential investment to be made by a Spanish producer of light components is still under negotiation, stated the mayor of Velky Krtis, Jozef Sauver. Should the Spanish company decide to come to the region, about 100 people could find a job at the former Liaz production halls. Currently, PRP is the largest employer in the region. Over the last 7 years, its owners have invested over 60 mil. Sk (1.58 mil. EUR) in the saw mill. Now they are preparing an 80 mil. Sk (2.10 mil. EUR) investment. The new business would process timber waste that is currently sold to the chipboard producer, Bucina DDD. In the future, the material could be used to produce energy. The town council are considering the construction of a new wood-fired heat plant that would use timber waste bought from PRP. (author)

Material property evaluations of bimetallic welds, stainless steel saw fusion lines, and materials affected by dynamic strain aging

Energy Technology Data Exchange (ETDEWEB)

Rudland, D.; Scott, P.; Marschall, C.; Wilkowski, G. [Battelle Memorial Institute, Columbus, OH (United States)

1997-04-01

Pipe fracture analyses can often reasonably predict the behavior of flawed piping. However, there are material applications with uncertainties in fracture behavior. This paper summarizes work on three such cases. First, the fracture behavior of bimetallic welds are discussed. The purpose of the study was to determine if current fracture analyses can predict the response of pipe with flaws in bimetallic welds. The weld joined sections of A516 Grade 70 carbon steel to F316 stainless steel. The crack was along the carbon steel base metal to Inconel 182 weld metal fusion line. Material properties from tensile and C(T) specimens were used to predict large pipe response. The major conclusion from the work is that fracture behavior of the weld could be evaluated with reasonable accuracy using properties of the carbon steel pipe and conventional J-estimation analyses. However, results may not be generally true for all bimetallic welds. Second, the toughness of austenitic steel submerged-arc weld (SAW) fusion lines is discussed. During large-scale pipe tests with flaws in the center of the SAW, the crack tended to grow into the fusion line. The fracture toughness of the base metal, the SAW, and the fusion line were determined and compared. The major conclusion reached is that although the fusion line had a higher initiation toughness than the weld metal, the fusion-line J-R curve reached a steady-state value while the SAW J-R curve increased. Last, carbon steel fracture experiments containing circumferential flaws with periods of unstable crack jumps during steady ductile tearing are discussed. These instabilities are believed to be due to dynamic strain aging (DSA). The paper discusses DSA, a screening criteria developed to predict DSA, and the ability of the current J-based methodologies to assess the effect of these crack instabilities. The effect of loading rate on the strength and toughness of several different carbon steel pipes at LWR temperatures is also discussed.

Hybridization at an ecotone: ecological and genetic barriers between three Iberian vipers.

Science.gov (United States)

Tarroso, Pedro; Pereira, Ricardo J; Martínez-Freiría, Fernando; Godinho, Raquel; Brito, José C

2014-03-01

The formation of stable genetic boundaries between emerging species is often diagnosed by reduced hybrid fitness relative to parental taxa. This reduced fitness can arise from endogenous and/or exogenous barriers to gene flow. Although detecting exogenous barriers in nature is difficult, we can estimate the role of ecological divergence in driving species boundaries by integrating molecular and ecological niche modelling tools. Here, we focus on a three-way secondary contact zone between three viper species (Vipera aspis, V. latastei and V. seoanei) to test for the contribution of ecological divergence to the development of reproductive barriers at several species traits (morphology, nuclear DNA and mitochondrial DNA). Both the nuclear and mitochondrial data show that all taxa are genetically distinct and that the sister species V. aspis and V. latastei hybridize frequently and backcross over several generations. We find that the three taxa have diverged ecologically and meet at a hybrid zone coincident with a steep ecotone between the Atlantic and Mediterranean biogeographical provinces. Integrating landscape and genetic approaches, we show that hybridization is spatially restricted to habitats that are suboptimal for parental taxa. Together, these results suggest that niche separation and adaptation to an ecological gradient confer an important barrier to gene flow among taxa that have not achieved complete reproductive isolation. © 2014 John Wiley & Sons Ltd.

Dilute Russel Viper Venom Time analysis in a Haematology Laboratory: An audit.

Science.gov (United States)

Kruger, W; Meyer, P W A; Nel, J G

2018-04-17

To determine whether the current set of evaluation criteria used for dilute Russel Viper Venom Time (dRVVT) investigations in the routine laboratory meet expectation and identify possible shortcomings. All dRVVT assays requested from January 2015 to December 2015 were appraised in this cross-sectional study. The raw data panels were compared with the new reference interval, established in 2016, to determine the sequence of assays that should have been performed. The interpretive comments were audited, and false-negative reports identified. Interpretive comments according to three interpretation guidelines were compared. The reagent cost per assay was determined, and reagent cost wastage, due to redundant tests, was calculated. Only ~9% of dRVVT results authorized during 2015 had an interpretive comment included in the report. ~15% of these results were false-negative interpretations. There is a significant statistical difference in interpretive comments between the three interpretation methods. Redundant mixing tests resulted in R 7477.91 (~11%) reagent cost wastage in 2015. We managed to demonstrate very evident deficiencies in our own practice and managed to establish a standardized workflow that will potentially render our service more efficient and cost effective, aiding clinicians in making improved treatment decisions and diagnoses. Furthermore, it is essential that standard operating procedures be kept up to date and executed by all staff in the laboratory. © 2018 John Wiley & Sons Ltd.

SAW Classification Algorithm for Chinese Text Classification

OpenAIRE

Xiaoli Guo; Huiyu Sun; Tiehua Zhou; Ling Wang; Zhaoyang Qu; Jiannan Zang

2015-01-01

Considering the explosive growth of data, the increased amount of text data’s effect on the performance of text categorization forward the need for higher requirements, such that the existing classification method cannot be satisfied. Based on the study of existing text classification technology and semantics, this paper puts forward a kind of Chinese text classification oriented SAW (Structural Auxiliary Word) algorithm. The algorithm uses the special space effect of Chinese text where words...

Optimization for cellulase production by Aspergillus niger using saw ...

African Journals Online (AJOL)

Cellulases are a group of hydrolytic enzymes and are capable of degrading lignocellulosic materials. Cellulases have wide range of applications. This work focuses on factors relevant for improvement of enzymatic hydrolysis of saw dust by using Aspergillus niger. Different cultural conditions were examined to assess their ...

Improved Safety and Cost Savings from Reductions in Cast-Saw Burns After Simulation-Based Education for Orthopaedic Surgery Residents.

Science.gov (United States)

Bae, Donald S; Lynch, Hayley; Jamieson, Katherine; Yu-Moe, C Winnie; Roussin, Christopher

2017-09-06

The purpose of this investigation was to characterize the clinical efficacy and cost-effectiveness of simulation training aimed at reducing cast-saw injuries. Third-year orthopaedic residents underwent simulation-based instruction on distal radial fracture reduction, casting, and cast removal using an oscillating saw. The analysis compared incidences of cast-saw injuries and associated costs before and after the implementation of the simulation curriculum. Actual and potential costs associated with cast-saw injuries included wound care, extra clinical visits, and potential total payment (indemnity and expense payments). Curriculum costs were calculated through time-derived, activity-based accounting methods. The researchers compared the costs of cast-saw injuries and the simulation curriculum to determine overall savings and return on investment. In the 2.5 years prior to simulation, cast-saw injuries occurred in approximately 4.3 per 100 casts cut by orthopaedic residents. For the 2.5-year period post-simulation, the injury rate decreased significantly to approximately 0.7 per 100 casts cut (p = 0.002). The total cost to implement the casting simulation was $2,465.31 per 6-month resident rotation. On the basis of historical data related to cast-saw burns (n = 6), total payments ranged from $2,995 to $25,000 per claim. The anticipated savings from averted cast-saw injuries and associated medicolegal payments in the 2.5 years post-simulation was $27,131, representing an 11-to-1 return on investment. Simulation-based training for orthopaedic surgical residents was effective in reducing cast-saw injuries and had a high theoretical return on investment. These results support further investment in simulation-based training as cost-effective means of improving patient safety and clinical outcomes. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Development of large diamond-tipped saws and their application to cutting large radioactive reinforced concrete structures

International Nuclear Information System (INIS)

Rawlings, G.W.

1985-01-01

The object of this research was to develop a large circular saw, capable of cutting away, by remote control, the inner radio-activated layer of reinforced concrete biological shields or pre-stressed concrete pressure vessel of gas-cooled reactors. Initial investigations and enquiries put to the existing saw industry established although there were blades in use approaching the size and type required, the development of large machines was restricted to the fixed-bed type because there was little demand for deep sawing in the construction or demolition industry. Preliminary work was carried out in 1981 to demonstrate the largest available wall saw at that time which showed that by changing the blade three times, a kerf 810 mm deep could be achieved. From this demonstration, the design and development of a 'free frame saw' and construction of a 660 mm blade as well as a 2500 mm blade, were performed. Initially, the 660 mm blade was used to cut the concrete and reinforcement, followed by the 2500 mm blade to produce a 1 m kerf. Subsequent development and testing demonstrated that the 2500 mm blade could be controlled to ''plunge cut'', that is to cut straight down in the reinforced concrete to a depth of 1 m in 7 minutes and would then advance at 160 mm/min; this is a work rate of 10 m 2 /hr. The final demonstration was to mount the saw on an extendible boom and remove a 1 m 3 block of reinforced concrete from the vertical face of a test wall

Application of wire sawing method to decommissioning of high level activated concrete

Energy Technology Data Exchange (ETDEWEB)

Hasegawa, Hideki; Nishimura, Youichi [Tokyo Electric Power Co., Tokyo (Japan); Watanabe, Morishige; Yamashita Yoshitaka

1999-07-01

Wire sawing method is proposed as an effective cutting method for the dismantling of high level activated concrete of a nuclear power plant. The cutting test with wire sawing method discussed in this paper was carried out to obtain the data such as the cutting rate, the volume of concrete dust and the time of cutting and related work. The cutting test consisted of two parts; 'Fundamental test' and 'mock-up test.' In the fundamental test, we carried out the cutting test with small concrete blocks simulating the high level activated concrete of Boiling Water Reactor (BWR) and Pressurized Water Reactor (PWR). Through the test, the following data were obtained: the cutting rate of wire sawing, the volume of generated concrete dust and the grading distribution of suspended particulate. We also studied the life of wire and the relations between the wire tension, the wire rotating speed, the steel ratio and the cutting rate. In the mock-up test, we carried out the test with large concrete blocks simulating the part of the reactor shield wall of BWR and the biological shield wall of PWR. Through the mock-up test, we made clear that it is possible that the large test blocks with high re-bar ratio and a steel plate (steel plates) were cut smoothly by the wire sawing method. In the test, the following data were obtained; the cutting rate, the time of the cutting and related work and the remote controllability of cutting machines. (author)

Application of wire sawing method to decommissioning of high level activated concrete

International Nuclear Information System (INIS)

Hasegawa, Hideki; Nishimura, Youichi; Watanabe, Morishige; Yamashita Yoshitaka

1999-01-01

Wire sawing method is proposed as an effective cutting method for the dismantling of high level activated concrete of a nuclear power plant. The cutting test with wire sawing method discussed in this paper was carried out to obtain the data such as the cutting rate, the volume of concrete dust and the time of cutting and related work. The cutting test consisted of two parts; 'Fundamental test' and 'mock-up test.' In the fundamental test, we carried out the cutting test with small concrete blocks simulating the high level activated concrete of Boiling Water Reactor (BWR) and Pressurized Water Reactor (PWR). Through the test, the following data were obtained: the cutting rate of wire sawing, the volume of generated concrete dust and the grading distribution of suspended particulate. We also studied the life of wire and the relations between the wire tension, the wire rotating speed, the steel ratio and the cutting rate. In the mock-up test, we carried out the test with large concrete blocks simulating the part of the reactor shield wall of BWR and the biological shield wall of PWR. Through the mock-up test, we made clear that it is possible that the large test blocks with high re-bar ratio and a steel plate (steel plates) were cut smoothly by the wire sawing method. In the test, the following data were obtained; the cutting rate, the time of the cutting and related work and the remote controllability of cutting machines. (author)

On-Chip Correlator for Passive Wireless SAW Multisensor Systems

Directory of Open Access Journals (Sweden)

Liqiang Xie

2016-01-01

Full Text Available For decoding the asynchronous superposition of response signals from different sensors, it is a challenge to achieve correlation in a code division multiplexing (CDM based passive wireless surface acoustic wave (SAW multisensor system. Therefore, an on-chip correlator scheme is developed in this paper. In contrast to conventional CDM-based systems, this novel scheme enables the correlations to be operated at the SAW sensors, instead of the reader. Thus, the response signals arriving at the reader are the result of cross-correlation on the chips. It is then easy for the reader to distinguish the sensor that is matched with the interrogating signal. The operation principle, signal analysis, and simulation of the novel scheme are described in the paper. The simulation results show the response signals from the correlations of the sensors. A clear spike pulse is presented in the response signals, when a sensor code is matched with the interrogating code. Simulations verify the feasibility of the on-chip correlator concept.

Protective effects of Mucuna pruriens seed extract pretreatment against cardiovascular and respiratory depressant effects of Calloselasma rhodostoma (Malayan pit viper) venom in rats.

Science.gov (United States)

Fung, S Y; Tan, N H; Sim, S M

2010-12-01

The protective effects of Mucuna pruriens seed extract (MPE) against the cardio-respiratory depressant and neuromuscular paralytic effects induced by injection of Calloselasma rhodostoma (Malayan pit viper) venom in anaesthetized rats were investigated. While MPE pretreatment did not reverse the inhibitory effect of the venom on the gastrocnemius muscle excitability, it significantly attenuated the venom-induced cardio-respiratory depressant effects (p < 0.05). The protection effects may have an immunological mechanism, as indicated by the presence of several proteins in the venom that are immunoreactive against anti-MPE. However, we cannot rule out the possibility that the pretreatment may exert a direct, non-immunological protective action against the venom.

Calculation of the Stiffness in the Roll Tensioning of the Circular Saw Blade

Directory of Open Access Journals (Sweden)

Linh Vo Tung

2016-01-01

Full Text Available The circular blade has been widely used in some projects such as cutting stone, wood and other projects. Owing to its particularity and wide use, it has an important position in cutting industry. Roll tensioning is considered as an effective method which can be used to improve the stiffness and performance of the circular saw blade. The effect of rolling position and width in the roll tensioning is obvious. In this paper the calculation of the maximum stiffness at different rolling position and width in the rolling were carried out through the finite -element. The results show that three ideal points are found. And when rolling position is Ø950mm and rolling width is 20mm, the maximum stiffness of the circular saw blade whose minimum deformation is 0.028mm is found. The roll tensioning can increase the stiffness of the saw blade. It will provide a theoretical basis and guidance for the actual production.

Improving BPH symptoms and sexual dysfunctions with a saw palmetto preparation? Results from a pilot trial.

Science.gov (United States)

Suter, Andreas; Saller, Reinhard; Riedi, Eugen; Heinrich, Michael

2013-02-01

In elderly men, benign prostatic hyperplasia (BPH) is a major risk factor for sexual dysfunctions (SDys). Additionally, the standard treatments for BPH symptoms, alpha blockers and 5-alpha-reductase inhibitors, cause SDys themselves. Preparations from saw palmetto berries are an efficacious and well-tolerated symptomatic treatment for mild to moderate BPH and have traditionally been used to treat SDys. We conducted an open multicentric clinical pilot trial to investigate whether the saw palmetto berry preparation Prostasan® influenced BPH symptoms and SDys. Eighty-two patients participated in the 8-week trial, taking one capsule of 320 mg saw palmetto extract daily. At the end of the treatment, the International Prostate Symptom Score was reduced from 14.4 ± 4.7 to 6.9 ± 5.2 (p saw palmetto to show improvement in BPH symptoms and SDys as well. [Corrections made here after initial online publication.] Copyright © 2012 John Wiley & Sons, Ltd.

Theoretical studies on a TeO2/ZnO/diamond-layered structure for zero TCD SAW devices

Science.gov (United States)

Dewan, Namrata; Sreenivas, K.; Gupta, Vinay

2008-08-01

High-frequency surface acoustic wave (SAW) devices based on diamond substrate are useful because of their very high SAW velocity. In the present work, SAW propagation characteristics, such as phase velocity, coupling coefficient and temperature coefficient of delay (TCD) of a TeO2/ZnO/diamond-layered structure, are examined using theoretical calculations. The ZnO/diamond bi-layer structure is found to exhibit a high positive TCD value. A zero TCD device structure is obtained after integration with a TeO2 over layer having a negative TCD value. Introduction of a non-piezoelectric TeO2 over layer on the bi-layer structure (ZnO/diamond) increases the coupling coefficient. A relatively low thickness of TeO2 thin film (~(1.6-3.1) × 10-3λ) is required to achieve temperature-stable SAW devices based on diamond.

Jihad Bunuh Diri Menurut Hadis Nabi SAW

Directory of Open Access Journals (Sweden)

Adynata Adynata

2013-09-01

Full Text Available Pada zaman sekarang sering kita mendengar dan melihat di media massa banyaknya terjadi born bunuh diri, baik di tempat-tempat fasilitas umum seperti hotel, rumah ibadah, tempat pertemuan ataupun yang terjadi di daerah peperangan seperti di Palestina ketika perang antara tentara Israel dan Palestina. Para ulama telah mengkaji tentang hukum melakukan bom bunuh diri. Mereka berbeda pendapat tentang hukumnya; ada yang membolehkan dan ada pula yang melarang secara mutlak. Ayat-ayat al­ Quran dan hadis Rasulullah SAW yang terkait dengan persoalan ini, secara zahir tampak bertentangan. Dalam sebuah hadis Beliau melarang membunuh diri dengan cara apapun dan nanti di dalam neraka Jahannam pelakunya akan disiksa dengan cara yang dilakukannya ketika membunuh dirinya serta kekal di dalamnya. Sementara dalam Hadis yang lain disebutkan Rasulullah SAW menawarkan kepada satu orang sahabatnya untuk melawan musuh yang banyak yang diyakini akan membawa kematiannya pada perang Uhud sehingga terkesan sahabat tersebut mengorbankan dirinya. Hadis-hadis yang tampak bertentangan ini perlu dikaji lebih mendalam untuk ditemukan relevansinya dengan peristiswa born bunuh diri yang banyak terjadi sekarang. Penulis memahami bahwa bom bunuh diri pada prinsipnya diharamkan, tetapi jika dilakukan dalam kondisi terpaksa dalam medan peperangan untuk menyelamatkan pasukan dan menghindarkan bahaya yang lebih besar lagi maka boleh dilakukan asalkan atas perintah pemimpin perang. tetapi jika dilakukan tidak kondisi perang maka tidak boleh dilakukan dan termasuk sikap putus asa terhadap kemaksiatan yang terjadi

Hot tests of the small portable arc saw using an electromechanical manipulator

International Nuclear Information System (INIS)

Deichelbohrer, P.R.

1985-01-01

A hand-held portable arc saw was demonstrated in 1982. Known as the Small Portable Arc Saw (SPARCS), it weighed less than 15-lb and could cut metal sheet up to 1/2-in thick. From the hand-held SPARCS, a manipulator-handled model was developed for use in decommissioning operations by Pacific Northwest Laboratory (PNL). During cold tests, the SPARCS, which was maneuvered with a mechanical, master-slave manipulator, cut 1-in thick stainless steel plate. The decommissioning method of PNL depended principally on a plasma cutting torch for size reduction. The SPARCS unit was installed in the cell to assist the plasma torch. At present, use of the SPARCS in this project has not been necessary, and it has not been operated in the cell. The plasma cutting torch is a widely used tool for size reduction; the torch can cut stainless steel and heavy material, is lightweight, and is easy to handle with manipulators. Some shortcomings, however, have been reported; for example, cutting pipe, laminates, or forms with hollow cross sections (e.g., unistrut) is sometimes cumbersome. The stand-off spacing required is another constraint. The torch tip must be spaced approximately 1/2-in from the work to achieve proper cutting action. During cutting, this spacing requires accurate control of the torch. The manipulator operator must have significant skill to achieve this control. Test results to date show that the arc saw's ability to cut heavy, hard, and inert metal compares favorably with the performance of the plasma torch. The arc saw offers the further advantages of cutting hollow cross-section forms without special procedures, and of cutting without stand-off spacing

SAW passive wireless sensor-RFID tags with enhanced range, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This proposal describes the development of passive wireless surface acoustic wave (SAW) RFID sensor-tags with enhanced range for remote monitoring of large groups of...

What do I tell patients about saw palmetto for benign prostatic hyperplasia?

Science.gov (United States)

Kane, Christopher J; Raheem, Omer A; Bent, Stephen; Avins, Andrew L

2011-08-01

Saw palmetto is widely used to treat lower urinary tract symptoms (LUTS) caused by benign prostatic hyperplasia (BPH). Although there is passionate support for herbal and complementary therapies for LUTS, clinical evidence is mixed. Because there is a well-recognized, profound placebo effect in tests of efficacy for agents treating LUTS, it is imperative that all therapies be tested in placebo-controlled trials. This article reviews evidence of the efficacy and safety of saw palmetto for men with LUTS caused by BPH, with particular emphasis on published randomized clinical trials and the upcoming Complementary and Alternative Medicine for Urologic Symptoms (CAMUS) trial. Copyright © 2011 Elsevier Inc. All rights reserved.

Healing of osteotomy sites applying either piezosurgery or two conventional saw blades: a pilot study in rabbits.

Science.gov (United States)

Ma, Li; Stübinger, Stefan; Liu, Xi Ling; Schneider, Urs A; Lang, Niklaus P

2013-08-01

The purpose of this study was to compare bone healing of experimental osteotomies applying either piezosurgery or two different oscillating saw blades in a rabbit model. The 16 rabbits were randomly assigned into four groups to comply with observation periods of one, two, three and five weeks. In all animals, four osteotomy lines were performed on the left and right nasal bone using a conventional saw blade, a novel saw blade and piezosurgery. All three osteotomy techniques revealed an advanced gap healing starting after one week. The most pronounced new bone formation took place between two and three weeks, whereby piezoelectric surgery revealed a tendency to faster bone formation and remodelling. Yet, there were no significant differences between the three modalities. The use of a novel as well as the piezoelectric bone-cutting instrument revealed advanced bone healing with a favourable surgical performance compared to a traditional saw.

Theoretical studies on a TeO2/ZnO/diamond-layered structure for zero TCD SAW devices

International Nuclear Information System (INIS)

Dewan, Namrata; Sreenivas, K; Gupta, Vinay

2008-01-01

High-frequency surface acoustic wave (SAW) devices based on diamond substrate are useful because of their very high SAW velocity. In the present work, SAW propagation characteristics, such as phase velocity, coupling coefficient and temperature coefficient of delay (TCD) of a TeO 2 /ZnO/diamond-layered structure, are examined using theoretical calculations. The ZnO/diamond bi-layer structure is found to exhibit a high positive TCD value. A zero TCD device structure is obtained after integration with a TeO 2 over layer having a negative TCD value. Introduction of a non-piezoelectric TeO 2 over layer on the bi-layer structure (ZnO/diamond) increases the coupling coefficient. A relatively low thickness of TeO 2 thin film (∼(1.6–3.1) × 10 −3 λ) is required to achieve temperature-stable SAW devices based on diamond

Enhanced Codeset Passive Wireless SAW Sensor-Tags and System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The proposed project will develop a set of at least 100 passive wireless surface acoustic wave (SAW) RFID sensor-tags for near-simultaneous remote monitoring of...

Development of Mathematical Model for Lifecycle Management Process of New Type of Multirip Saw Machine

Directory of Open Access Journals (Sweden)

B. V. Phung

2017-01-01

Full Text Available The subject of research is a new type of the multirip saw machine with circular reciprocating saw blades. This machine has a number of advantages in comparison with other machines of similar purpose. The paper presents an overview of different types of saw equipment and describes basic characteristics of the machine under investigation.Using the concept of lifecycle management of the considered machine in a unified information space is necessary to improve quality and competitiveness in the current production environment. In this lifecycle all the members, namely designers, technologists, customers, etc., have a philosophy to tend to optimize the overall machine design as much as possible. However, it is not always possible to achieve. Conversely, at the boundary between the phases there are several mismatching situations, if not even conflicting inconsistencies. For example, improvement of mass characteristics can lead to poor stability and rigidity of the saw blade. Machine output improvement through increasing frequency of the machine motor rotation, on the other side, results in reducing stable ability of the saw blades and so on.In order to provide a coherent framework for the collaborative environment between the members of the life cycle, the article presents a technique to construct a mathematical model that allows combining all different members’ requirements in the unified information model. The article also gives analysis of kinematic and dynamic behavior and technological characteristics of the machine. Describes in detail all the controlled parameters, functional constraints, and quality criteria of the machine under consideration. Depending on the controlled parameters, the analytical relationships formulate functional constraints and quality criteria of the machine. The proposed algorithm allows fast and exact calculation of all the functional constraints and quality criteria of the machine for a given vector of the control

Acoustoelectric Effect on the Responses of SAW Sensors Coated with Electrospun ZnO Nanostructured Thin Film

Directory of Open Access Journals (Sweden)

Zafer Ziya Ozturk

2012-08-01

Full Text Available In this study, zinc oxide (ZnO was a very good candidate for improving the sensitivity of gas sensor technology. The preparation of an electrospun ZnO nanostructured thin film on a 433 MHz Rayleigh wave based Surface Acoustic Wave (SAW sensor and the investigation of the acoustoelectric effect on the responses of the SAW sensor are reported. We prepared an electrospun ZnO nanostructured thin film on the SAW devices by using an electrospray technique. To investigate the dependency of the sensor response on the structure and the number of the ZnO nanoparticles, SAW sensors were prepared with different coating loads. The coating frequency shifts were adjusted to fall between 100 kHz and 2.4 MHz. The sensor measurements were performed against VOCs such as acetone, trichloroethylene, chloroform, ethanol, n-propanol and methanol vapor. The sensor responses of n-propanol have opposite characteristics to the other VOCs, and we attributed these characteristics to the elastic effect/acoustoelectric effect.

The Distinct Build-Up Of Dense And Normal Massive Passive Galaxies In Vipers

Science.gov (United States)

Gargiulo, Adriana; Vipers Team

2017-06-01

At fixed stellar mass, the population of passive galaxies has increased its mean effective radius by a factor 5 in the last 10 Gyr, decreasing its mean stellar mass density (S = Mstar/(2πRe 2 ) by a factor >> 10. Whether this increase in is mainly due to the size-growth of individual galaxies through dry mergers, or to the fact that newly quenched galaxies have a larger size, is still matter of debate. A promising approach to shed light on this issue is to investigate the evolution of the number density of passive galaxies as a function of their mass density. In this context, massive (Mstar >10^11 Msun) passive galaxies are the most intriguing systems to study, since, in a hierarchical scenario, they are expected to accrete their stellar mass mainly by mergers. The wide area (˜ 16 sq. deg) and high sampling rate (˜ 40%) of the spectroscopic survey VIPERS allowed us to collect a sample of ˜ 2000 passive massive galaxies over the redshift range 0.5 passive galaxies as function both of redshift and mass density. This information, combined with the evolution of the number density allowed us to put constraints on the mass accretion scenarios of passive galaxies. In this talk I will present our results and conclusions and how they depend on the environment in which the galaxies reside.

[A case of rhabdomyolysis caused by saw palmetto of healthy foods].

Science.gov (United States)

Hanaka, Minako; Yoshii, Chiharu; Yatera, Kazuhiro; Ito, Chiyo; Chojin, Yasuo; Nagata, Shuya; Yamasaki, Kei; Nishida, Chinatsu; Kawanami, Toshinori; Kawanami, Yukiko; Ishimoto, Hiroshi; Mukae, Hiroshi

2012-06-01

An 82-year-old man visited our hospital when he developed a fever of over 38 degrees C after having consumed 5 types of health foods. He had previously been treated for chronic obstructive pulmonary disease, hypertension and hyperuricemia. Blood examination on admission revealed renal dysfunction, marked elevation of C-reactive protein, and an elevated level of serum creatine kinase. According to the laboratory data and his clinical history, rhabdomyolysis complicated by acute renal failure was suspected, but his condition improved and his fever was reduced with fluid infusion. As a drug lymphocyte stimulation test was positive for only saw palmetto in the 5 health foods, we diagnosed the case as rhabdomyolysis induced by saw palmetto. We believe that this is the first case of a health food being the cause of rhabdomyolysis.

Saw Palmetto Extract Inhibits Metastasis and Antiangiogenesis through STAT3 Signal Pathway in Glioma Cell

OpenAIRE

Ding, Hong; Shen, Jinglian; Yang, Yang; Che, Yuqin

2015-01-01

Signal transducer and activator of transcription factor 3 (STAT3) plays an important role in the proliferation and angiogenesis in human glioma. Previous research indicated that saw palmetto extract markedly inhibited the proliferation of human glioma cells through STAT3 signal pathway. But its effect on tumor metastasis and antiangiogenesis is not clear. This study is to further clear the impact of saw palmetto extract on glioma cell metastasis, antiangiogenesis, and its mechanism. TUNEL ass...

Knowledge and prevalence of use of saw palmetto and other herbal ...

African Journals Online (AJOL)

S. Persaud

2017-06-12

Jun 12, 2017 ... side effects sometimes noted with more conventional options [4]. While we ... our patients, this may be a worthwhile objective in future research. There has ... studies of saw palmetto and other herbal derivatives have shown.

Knowledge and prevalence of use of saw palmetto and other herbal ...

African Journals Online (AJOL)

S. Persaud

2017-06-12

Jun 12, 2017 ... men with prostate cancer or benign prostatic hyperplasia (BPH) and who were part of our outpatient clinics. ... plasia (BPH) and prostate cancer, of which saw palmetto (serenoa repens) may be the most .... receptor signaling.

Acute hypopituitarism complicating Russell's viper envenomation: case series and systematic review.

Science.gov (United States)

Rajagopala, S; Thabah, M M; Ariga, K K; Gopalakrishnan, M

2015-09-01

Chronic hypopituitarism following Russell viper envenomation (RVE) is a rare but well-recognized syndrome. The clinical features, associations, management and outcomes of RVE associated-acute hypopituitarism (AHP) are not well described. To describe the clinical features, intensive care unit (ICU) management and outcomes of a series of patients with RVE-AHP and identify the clinical associations of RVE-AHP. We describe a series of patients with prospectively identified AHP related to RVE and describe our findings comparing RVE with and without AHP and a systematic search of literature on AHP related to RVE. We identified nine cases of AHP related to RVE. Unexplained hypoglycemia (100%) and hypotension (66.7%) were the most common findings at presentation. AHP occurred after a median of 9 (range, 2-14) days after severe envenomation and was associated with multi-organ dysfunction, lower platelet counts, more bleeding and transfusions when compared to patients with RVE alone. The presence of clinically defined capillary leak syndrome, disseminated intravascular coagulation and mortality were not different from those without AHP. Our systematic search yielded 12 cases of AHP related to RVE; data on associated clinical manifestations, therapy and ASV administration were not available in most reports. AHP is a very rare complication of RVE. Unexplained hypoglycemia and hypotension should prompt evaluation for AHP in RVE. AHP is associated with severe RVE, multi-organ dysfunction, bleeding and need for transfusion. Prompt treatment with steroids may reduce mortality related to AHP in RVE. © The Author 2015. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Chopping and webbing control saw-palmetto in south Florida

Science.gov (United States)

Clifford E. Lewis

1972-01-01

Saw-palmetto is one of the more troublesome plants growing in south Florida, and its control is often desirable in programs of range and timber management. Both cross-chopping and webbing (root plowing) proved to be effective control measures, but webbing appeared to be less effective on a moist site. Many other shrubs were also effectively reduced by these treatments...

Heat Transfer Characteristics of a Focused Surface Acoustic Wave (F-SAW Device for Interfacial Droplet Jetting

Directory of Open Access Journals (Sweden)

Donghwi Lee

2018-06-01

Full Text Available In this study, we investigate the interfacial droplet jetting characteristics and thermal stability of a focused surface acoustic wave device (F-SAW. An F-SAW device capable of generating a 20 MHz surface acoustic wave by applying sufficient radio frequency power (2–19 W on a 128°-rotated YX-cut piezoelectric lithium niobate substrate for interfacial droplet jetting is proposed. The interfacial droplet jetting characteristics were visualized by a shadowgraph method using a high-speed camera, and a heat transfer experiment was conducted using K-type thermocouples. The interfacial droplet jetting characteristics (jet angle and height were analyzed for two different cases by applying a single interdigital transducer and two opposite interdigital transducers. Surface temperature variations were analyzed with radio frequency input power increases to evaluate the thermal stability of the F-SAW device in air and water environments. We demonstrate that the maximum temperature increase of the F-SAW device in the water was 1/20 of that in the air, owing to the very high convective heat transfer coefficient of the water, resulting in prevention of the performance degradation of the focused acoustic wave device.

76 FR 62678 - Table Saw Blade Contact Injuries; Advance Notice of Proposed Rulemaking; Request for Comments and...

Science.gov (United States)

2011-10-11

... reduces the risk of injury. 15 U.S.C. 2058(f)(3). C. The Product Table saws are stationary power tools... identified at least 15 manufacturers and importers of table saws. According to the Power Tool Institute... for medical treatment, lost time from work, product liability litigation, and pain and suffering. The...

NMR structure of bitistatin – a missing piece in the evolutionary pathway of snake venom disintegrins.

Science.gov (United States)

Carbajo, Rodrigo J; Sanz, Libia; Perez, Alicia; Calvete, Juan J

2015-01-01

Extant disintegrins, as found in the venoms of Viperidae and Crotalidae snakes (vipers and rattlesnakes, represent a family of polypeptides that block the function of β1 and β3 integrin receptors, both potently and with a high degree of selectivity. This toxin family owes its origin to the neofunctionalization of the extracellular region of an ADAM (a disintegrin and metalloprotease) molecule recruited into the snake venom gland proteome in the Jurassic. The evolutionary structural diversification of the disintegrin scaffold, from the ancestral long disintegrins to the more recently evolved medium-sized, dimeric and short disintegrins, involved the stepwise loss of pairs of class-specific disulfide linkages and the processing of the N-terminal region. NMR and crystal structures of medium-sized, dimeric and short disintegrins have been solved. However, the structure of a long disintegrin remained unknown. The present study reports the NMR solution structures of two disulfide bond conformers of the long disintegrin bitistatin from the African puff adder Bitis arietans. The findings provide insight into how a structural domain of the extracellular region of an ADAM molecule, recruited into and selectively expressed in the snake venom gland proteome as a PIII metalloprotease in the Jurassic, has subsequently been tranformed into a family of integrin receptor antagonists. © 2014 FEBS.

Predictive modelling of noise level generated during sawing of rocks

Indian Academy of Sciences (India)

This paper presents an experimental and statistical study on noise level generated during of rock sawing by circular diamond sawblades. Influence of the operating variables and rock properties on the noise level are investigated and analysed. Statistical analyses are then employed and models are built for the prediction of ...

Rapid Airfield Damage Recovery: Deployable Saw Technology Evaluation

Science.gov (United States)

2017-12-29

portland cement concrete for Rapid Airfield Damage Recovery (RADR). However, the next generation of RADR is focusing on lighter and leaner efforts...best tools for cutting portland cement concrete (PCC) in ADR scenarios (Bell et al. 2015 and Edwards et al. 2015). The saws are easily attached to...Various teeth are available for varying needs and jobs. Most teeth are made of steel with carbide tips. The carbide may be produced as a seat tip or

[Efficacy and safety of Saw Palmetto Extract Capsules in the treatment of benign prostatic hyperplasia].

Science.gov (United States)

Ju, Xiao-bing; Gu, Xiao-jian; Zhang, Zheng-yu; Wei, Zhong-qing; Xu, Zhuo-qun; Miao, Hui-dong; Zhou, Wei-min; Xu, Ren-fang; Cheng, Bin; Ma, Jian-guo; Niu, Tian-li; Qu, Ping; Xue, Bo-xin; Zhang, Wei

2015-12-01

To assess the efficacy and safety of Saw Palmetto Extract Capsules in the treatment of benign prostatic hyperplasia (BPH). We conducted a multi-centered open clinical study on 165 BPH patients treated with Saw Palmetto Extract Capsules at a dose of 160 mg qd for 12 weeks. At the baseline and after 6 and 12 weeks of medication, we compared the International Prostate Symptom Scores (IPSS), prostate volume, postvoid residual urine volume, urinary flow rate, quality of life scores (QOL), and adverse events between the two groups of patients. Compared with the baseline, both IPSS and QOL were improved after 6 weeks of medication, and at 12 weeks, significant improvement was found in IPSS, QOL, urinary flow rate, and postvoid residual urine. Mild stomachache occurred in 1 case, which necessitated no treatment. Saw Palmetto Extract Capsules were safe and effective for the treatment of BPH.

Reducing the risk of injury from table saw use: the potential benefits and costs of automatic protection.

Science.gov (United States)

Graham, John D; Chang, Joice

2015-02-01

The use of table saws in the United States is associated with approximately 28,000 emergency department (ED) visits and 2,000 cases of finger amputation per year. This article provides a quantitative estimate of the economic benefits of automatic protection systems that could be designed into new table saw products. Benefits are defined as reduced health-care costs, enhanced production at work, and diminished pain and suffering. The present value of the benefits of automatic protection over the life of the table saw are interpreted as the switch-point cost value, the maximum investment in automatic protection that can be justified by benefit-cost comparison. Using two alternative methods for monetizing pain and suffering, the study finds switch-point cost values of $753 and $561 per saw. These point estimates are sensitive to the values of inputs, especially the average cost of injury. The various switch-point cost values are substantially higher than rough estimates of the incremental cost of automatic protection systems. Uncertainties and future research needs are discussed. © 2014 Society for Risk Analysis.

Radiative see-saw formula in nonsupersymmetric SO (10) with dark ...

Indian Academy of Sciences (India)

In the absence of supersymmetry, we show how experimentally verifiable radiative see-saw formula of Ma type is realized in non-SUSY (10) while fulfilling the twin objectives: precision gauge coupling unification and dark matter. This model is expected to have a dramatic impact on neutrino physics, dark matter and all ...

Comparison of Multi-Criteria Decision Support Methods (AHP, TOPSIS, SAW & PROMENTHEE) for Employee Placement

Science.gov (United States)

Widianta, M. M. D.; Rizaldi, T.; Setyohadi, D. P. S.; Riskiawan, H. Y.

2018-01-01

The right decision in placing employees in an appropriate position in a company will support the quality of management and will have an impact on improving the quality of human resources of the company. Such decision-making can be assisted by an approach through the Decision Support System (DSS) to improve accuracy in the employee placement process. The purpose of this paper is to compare the four methods of Multi Criteria Decision Making (MCDM), ie Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), Simple Additive Weighting (SAW), Analytic Hierarchy Process (AHP) and Preference Ranking Organization Method for Enrichment Of Evaluations (PROMETHEE) for the application of employee placement in accordance with predetermined criteria. The ranking results and the accuracy level obtained from each method are different depending on the different scaling and weighting processes in each method.

Saw palmetto (Serenoa repens) in men with lower urinary tract symptoms: effects on urodynamic parameters and voiding symptoms.

Science.gov (United States)

Gerber, G S; Zagaja, G P; Bales, G T; Chodak, G W; Contreras, B A

1998-06-01

To assess the effects of saw palmetto on voiding symptoms and urodynamic parameters in men with lower urinary tract symptoms (LUTS) presumed secondary to benign prostatic hyperplasia (BPH). Fifty men with previously untreated LUTS and a minimum International Prostate Symptom Score (IPSS) of 10 or greater were treated with a commercially available form of saw palmetto (160 mg twice per day) for 6 months. The initial evaluation included measurement of peak urinary flow rate, postvoid residual urine volume, pressure-flow study, and serum prostate-specific antigen (PSA) level. Patients completed an IPSS, serum PSA was determined, and flow rate was measured every 2 months during the course of the study. A urodynamic evaluation was repeated at the completion of the 6-month trial. The mean IPSS (+/-SD) improved from 19.5+/-5.5 to 12.5+/-7.0 (P saw palmetto for 2 months. An improvement in symptom score of 50% or greater after treatment with saw palmetto for 2, 4, and 6 months was noted in 21% (10 of 48), 30% (14 of 47), and 46% (21 of 46) of patients, respectively. There was no significant change in peak urinary flow rate, postvoid residual urine volume, or detrusor pressure at peak flow among patients completing the study. No significant change in mean serum PSA level was noted. Saw palmetto is a well-tolerated agent that may significantly improve lower urinary tract symptoms in men with BPH. However, we were unable to demonstrate any significant improvement in objective measures of bladder outlet obstruction. Placebo-controlled trials of saw palmetto are needed to evaluate the true effectiveness of this compound.

Impact of cool versus warm temperatures on gestation in the aspic viper (Vipera aspis).

Science.gov (United States)

Michel, Catherine Louise; Pastore, Jean-Henri; Bonnet, Xavier

2013-07-01

Previous experimental data suggested that digestion and growth rates are not impaired under cool constant temperature (23°C) in a viviparous snake (Vipera aspis). These results challenged the widespread notion that both elevated temperatures (e.g. 30°C) and temperature fluctuations are required for digestion and growth in temperate climate reptiles. Here, we investigated the impact of constant cool temperatures on another physiological performance that is crucial to population persistence: gestation. At the time when reproductive females were midway through vitellogenesis, we placed ten reproductive and two non-reproductive female aspic vipers at each of two contrasted constant temperature conditions: cool (23°C) versus warm (28°C). Sixty percent of the females placed at 28°C gave birth to healthy offspring, suggesting that constant warm body temperatures were compatible with normal offspring production. Conversely, none of the cool females gave birth to healthy offspring. A blister disease affected exclusively cool pregnant females. Apparently, the combination of cool temperatures plus gestation was too challenging for such females. Our results suggest that reproduction is more thermally sensitive than digestion or growth, indeed gestation faltered under moderately cool thermal constraints. This sensitivity could be a crucial factor determining the capacity of this species to colonize different habitats. Copyright © 2013 Elsevier Inc. All rights reserved.

Comparison of simple additive weighting (SAW) and composite performance index (CPI) methods in employee remuneration determination

Science.gov (United States)

Karlitasari, L.; Suhartini, D.; Benny

2017-01-01

The process of determining the employee remuneration for PT Sepatu Mas Idaman currently are still using Microsoft Excel-based spreadsheet where in the spreadsheet there is the value of criterias that must be calculated for every employee. This can give the effect of doubt during the assesment process, therefore resulting in the process to take much longer time. The process of employee remuneration determination is conducted by the assesment team based on some criterias that have been predetermined. The criteria used in the assessment process are namely the ability to work, human relations, job responsibility, discipline, creativity, work, achievement of targets, and absence. To ease the determination of employee remuneration to be more efficient and effective, the Simple Additive Weighting (SAW) method is used. SAW method can help in decision making for a certain case, and the calculation that generates the greatest value will be chosen as the best alternative. Other than SAW, also by using another method was the CPI method which is one of the calculating method in decision making based on performance index. Where SAW method was more faster by 89-93% compared to CPI method. Therefore it is expected that this application can be an evaluation material for the need of training and development for employee performances to be more optimal.

A Low Noise CMOS Readout Based on a Polymer-Coated SAW Array for Miniature Electronic Nose

Directory of Open Access Journals (Sweden)

Cheng-Chun Wu

2016-10-01

Full Text Available An electronic nose (E-Nose is one of the applications for surface acoustic wave (SAW sensors. In this paper, we present a low-noise complementary metal–oxide–semiconductor (CMOS readout application-specific integrated circuit (ASIC based on an SAW sensor array for achieving a miniature E-Nose. The center frequency of the SAW sensors was measured to be approximately 114 MHz. Because of interference between the sensors, we designed a low-noise CMOS frequency readout circuit to enable the SAW sensor to obtain frequency variation. The proposed circuit was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC 0.18 μm 1P6M CMOS process technology. The total chip size was nearly 1203 × 1203 μm2. The chip was operated at a supply voltage of 1 V for a digital circuit and 1.8 V for an analog circuit. The least measurable difference between frequencies was 4 Hz. The detection limit of the system, when estimated using methanol and ethanol, was 0.1 ppm. Their linearity was in the range of 0.1 to 26,000 ppm. The power consumption levels of the analog and digital circuits were 1.742 mW and 761 μW, respectively.

Contact Resistance Reduction of ZnO Thin Film Transistors (TFTs) with Saw-Shaped Electrode

KAUST Repository

Park, Woojin

2018-05-15

We report a saw-shaped electrode architecture ZnO thin film transistor (TFT) for effectively increase channel width. Such a saw-shaped electrode has ~2 times longer contact line at the contact metal/ZnO channel junction. We experimentally observed an enhancement in the output drive current by 50% and reduction in the contact resistance by over 50%, when compared to a typical shaped electrode ZnO TFT consuming the same chip area. This performance enhancement is attributed to extension of channel width. This technique can contribute to device performance enhancement and especially reduction in the contact resistance which is a serious challenge.

Wireless SAW passive tag temperature measurement in the collision case

Science.gov (United States)

Sorokin, A.; Shepeta, A.; Wattimena, M.

2018-04-01

This paper describes temperature measurement in the multisensor systems based on the radio-frequency identification SAW passive tags which are currently applied in the electric power systems and the switchgears. Different approaches of temperature measurement in the collision case are shown here. The study is based on the tag model with specific topology, which allows us to determine temperature through the response signal with time-frequency information. This research considers the collision case for several passive tags as the temperature sensors which are placed in the switchgear. This research proposal is to analyze the possibility of using several SAW passive sensors in the collision case. We consider the using of the different typical elements for passive surface acoustic wave tag which applies as an anticollision passive sensor. These wireless sensors based on the surface acoustic waves tags contain specifically coded structures. This topology makes possible the reliability of increasing tag identification and the temperature measurement in the collision case. As the results for this case we illustrate simultaneous measurement of at least six sensors.

The Effect of Increasing Doses of Saw Palmetto Fruit Extract on Serum PSA Levels: Analysis of the CAMUS Randomized Trial

Science.gov (United States)

Andriole, Gerald L.; McCullum-Hill, Christie; Sandhu, Gurdarshan S.; Crawford, E. David; Barry, Michael J.; Cantor, Alan

2014-01-01

Purpose Saw palmetto extracts are used for treating lower urinary tract symptoms in men despite level I evidence concluding that saw palmetto was ineffective in reducing lower urinary symptoms. We sought to determine whether higher doses of saw palmetto as studied in CAMUS affect serum PSA levels. Materials and Methods The CAMUS trial was a randomized, placebo-controlled double blind multi-centered North American trial conducted between June 5, 2008 and October 10, 2012 in which 369 men >45 years of age with AUA symptom score ≥ 8 and ≤ 24 were randomly assigned to placebo or dose escalation saw palmetto, which consisted of 320mg for first 24 weeks to 640mg for next 24 weeks to 960mg for last 24 weeks of this 72 week trial. Serum PSA levels (Beckman-Coulter) were obtained at baseline and at weeks 24, 48 and 72 and were compared between treatment groups using the pooled t and Fisher's exact tests. Results Serum PSA levels were similar at baseline for the placebo (1.93 ± 1.59 ng/ml) and saw palmetto groups (2.20 ± 1.95, p = 0.16). Changes in PSA levels over the course of the study were similar: placebo group mean change 0.16 ± 1.08 ng/ml and saw palmetto group mean change 0.23 ± 0.83 ng/ml (p value 0.50). Additionally, no differential effect on serum PSA levels was observed between treatment arms when groups were stratified by baseline PSA values. Conclusions Saw palmetto extract does not affect serum PSA levels more than placebo even at relatively high doses. PMID:23253958

Assessing the utility of the Oxford Nanopore MinION for snake venom gland cDNA sequencing

Directory of Open Access Journals (Sweden)

Adam D. Hargreaves

2015-11-01

Full Text Available Portable DNA sequencers such as the Oxford Nanopore MinION device have the potential to be truly disruptive technologies, facilitating new approaches and analyses and, in some cases, taking sequencing out of the lab and into the field. However, the capabilities of these technologies are still being revealed. Here we show that single-molecule cDNA sequencing using the MinION accurately characterises venom toxin-encoding genes in the painted saw-scaled viper, Echis coloratus. We find the raw sequencing error rate to be around 12%, improved to 0–2% with hybrid error correction and 3% with de novo error correction. Our corrected data provides full coding sequences and 5′ and 3′ UTRs for 29 of 33 candidate venom toxins detected, far superior to Illumina data (13/40 complete and Sanger-based ESTs (15/29. We suggest that, should the current pace of improvement continue, the MinION will become the default approach for cDNA sequencing in a variety of species.

Pharmacological characterization and chemical fractionation of a liposterolic extract of saw palmetto (Serenoa repens): effects on rat prostate contractility.

Science.gov (United States)

Chua, Thiam; Eise, Nicole T; Simpson, Jamie S; Ventura, Sabatino

2014-03-14

Saw palmetto (Serenoa repens) was first used medicinally by native American Indians to treat urological disorders. Nowadays, saw palmetto extracts are widely used in Europe and North America to treat the urinary symptoms associated with benign prostatic hyperplasia even though its mechanisms of action are poorly understood. This study aimed to characterize the bioactive constituents of a lipid extract of saw palmetto that are able to affect contractility of the rat prostate gland. The mechanism of action will also be investigated. A commercially available lipid extract of saw palmetto was subjected to fractionation using normal phase column chromatography. Composition of fractions was assessed by proton nuclear magnetic resonance spectroscopy ((1)H NMR) and mass spectrometry (MS). Contractile activities of these fractions were evaluated pharmacologically using isolated preparations of rat prostate gland and compared to the activity of the crude extract. Saw palmetto extract inhibited contractions of the rat prostate gland which were consistent with smooth muscle relaxant activity. Only the ethyl acetate fraction resulting from chromatography inhibited contractions of isolated rat prostates similarly to the inhibition produced by the crude lipid extract. Comparison with authentic samples and analysis of NMR data revealed that this bioactivity was due to the fatty acid components present in the ethyl acetate fraction. Bioassay using various pharmacological tools identified multiple contractile mechanisms which were affected by the bioactive constituents. A fatty acid component of saw palmetto extract causes inhibition of prostatic smooth muscle contractions via a non-specific mechanism. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Ear Mushroom (Auricularia sp.) Cultivation On Irradiated Palm Oil Empty Fruit Bunch And Saw Dust

International Nuclear Information System (INIS)

Endrawanto; Suwadji, E.

2000-01-01

The experiments were conducted under laboratory condition. Ear mushroom (Auricularia sp.) were grown on palm oil empty fruit bunch (EFB), sludge of oil residue, and saw dust as growth medium after (heating) autoclaved and irradiated by gamma rays at the dose of 30 kGy. EFB fiber as well as saw dust were mixed with sludge in composition of (1:0), (0;1), (1;1), (2;5), (1;5), (1;10) and (1;20). The mixture was then composted within 2 weeks by the addition of CaO 2%, CaSO 4 (gypsum) 2 %, rice bran 12%, P fertilizer 0,5% and urea 0,25%. A plastic bag volume 1000 ml was filled by 400 grams of composted material as mushrooms medium or bag log. Sterilized bag logs were then inoculated with mushroom spawns. After inoculation, bag logs were incubated during 1.5 months waiting for mycelium growing. Parameters of the experiments were following weight of mushrooms after harvesting, biological efficiency, rendement, and total fiber on bag log after mushrooms harvesting. Results of experiments showed that utilization of sludge as mixture with EFB produced weight mushrooms yield more than without sludge addition. Saw dust treatment produced more mushrooms weight compared to EFB treatments I.e. 90 g and 75 g. Weight of mushrooms produced and 76.6 g respectively. Rendement obtained between saw dust palm oil empty fruit bunch treatments were not significant at P<0.05 I.e. 91-92%

Viperous fangs: development and evolution of the venom canal.

Science.gov (United States)

Zahradnicek, Oldrich; Horacek, Ivan; Tucker, Abigail S

2008-01-01

Fangs are specialised long teeth that contain either a superficial groove (Gila monster, Beaded lizard, some colubrid snakes), along which the venom runs, or an enclosed canal (viperid, elapid and atractaspid), down which the venom flows inside the tooth. The fangs of viperid snakes are the most effective venom-delivery structures among vertebrates and have been the focus of scientific interests for more than 200 years. Despite this interest the questions of how the canal at the centre of the fang forms remains unresolved. Two different hypotheses have been suggested. The mainstream hypothesis claims that the venom-conducting canal develops by the invagination of the epithelial wall of the developing tooth germ. The sides of this invagination make contact and finally fuse to form the enclosed canal. The second hypothesis, known as the "brick chimney", claims the venom-conducting canal develops directly by successive dentine deposition as the tooth develops. The fang is thus built up from the tip to the base, without any folding of the tooth surface. In an attempt to cast further light on this subject the early development of the fangs was followed in a pit viper, Trimeresurus albolabris, using the expression of Sonic hedgehog (Shh). We demonstrate that the canal is indeed formed by an early folding event, resulting from an invagination of epithelial cells into the dental mesenchyme. The epithelial cells proliferate to enlarge the canal and then the cells die by apoptosis, forming an empty tube through which the poison runs. The entrance and discharge orifices at either end of the canal develop by a similar invagination but the initial width of the invagination is very different from that in the middle of the tooth, and is associated with higher proliferation. The two sides of the invaginating epithelium never come into contact, leaving the orifice open. The mechanism by which the orifices form can be likened to that observed in reptiles with an open groove along

INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - MILWAUKEE WORM DRIVE CIRCULAR SAW OENHP NUMBER: 2001-02, VERSION A

International Nuclear Information System (INIS)

2002-01-01

Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The Milwaukee worm drive circular saw was assessed on August 14, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Milwaukee worm drive circular saw is a hand-held tool with a 7 1/4-inch diameter circular blade for cutting wood. The saw contains a fixed upper and a retractable lower blade guard to prevent access to the blade during use. The unit is operated with an on/off guarded trigger switch; and is supported with a handgrip mounted on top of the saw. An adjustable lever sets the depth of cut. The retractable blade guard permits blind or plunge cuts and protects from blade access during shutdown and blade coast. Kickback, the sudden reaction to a pinched blade, is possible when using this saw and could cause the saw to lift up and out of the work piece toward the operator. Proper work position and firm control of the saw minimizes the potential for a sprain or strain. Care needs to be exercised to support the work piece properly and to not force the tool. Personal noise sampling indicated that one worker was near the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) while the other was at the Action Level with time-weighted averages (TWA's) of 82.7 and 84.6 dBA, respectively. These data are not entirely representative as they were gathered during a simulation and not at the actual worksite. Additional sampling should be conducted on-site, but the workers should wear hearing protection until it is determined that it

Achievable Performance and Effective Interrogator Design for SAW RFID Sensor Tags

Science.gov (United States)

Barton Richard J.

2012-01-01

For many NASA missions, remote sensing is a critical application that supports activities such as environmental monitoring, planetary science, structural shape and health monitoring, non-destructive evaluation, etc. The utility of the remote sensing devices themselves is greatly increased if they are passive V that is, they do not require any on-board power supply such as batteries V and if they can be identified uniquely during the sensor interrogation process. Additional passive sensor characteristics that enable greater utilization in space applications are small size and weight, long read ranges with low interrogator power, ruggedness, and operability in extreme environments (vacuum, extreme high/low temperature, high radiation, etc.) In this paper, we consider one very promising passive sensor technology, called surface acoustic wave (SAW) radio-frequency identification (RFID), that satisfies all of these criteria. In general, RFID is a method of identifying items using radio waves to interrogate tags encoded with a unique identifier that are affixed to the items of interest. In the case of passive tags, only the interrogator, which transmits power to the tags in the form of radio-frequency electromagnetic radiation, requires access to a power supply. Passive RFID technologies are used today in many applications, including asset tracking and management, security and access control, and remote sensing. To date, most of the development and application in RFID technology has focused on either asset/inventory tracking and control or security and access control because these are the largest commercial application areas. Recently however, there has been growing interest in using passive RFID technology for remote sensing applications, and SAW devices are at the forefront of RFID sensing technology development. Although SAW RFID tags have great potential for use in numerous space-based remote sensing applications, the limited collision resolution capability of

Saw Palmetto induces growth arrest and apoptosis of androgen-dependent prostate cancer LNCaP cells via inactivation of STAT 3 and androgen receptor signaling.

Science.gov (United States)

Yang, Yang; Ikezoe, Takayuki; Zheng, Zhixing; Taguchi, Hirokuni; Koeffler, H Phillip; Zhu, Wei-Guo

2007-09-01

PC-SPES is an eight-herb mixture that has an activity against prostate cancer. Recently, we purified Saw Palmetto (Serenoa repens) from PC-SPES and found that Saw Palmetto induced growth arrest of prostate cancer LNCaP, DU145, and PC3 cells with ED50s of approximately 2.0, 2.6, and 3.3 microl/ml, respectively, as measured by mitochondrial-dependent conversion of the the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. Saw Palmetto induced apoptosis of LNCaP cells in a time- and dose-dependent manner as measured by TUNEL assays. Also, Saw Palmetto increased the expression of p21waf1 and p53 protein in LNCaP cells. In addition, we found that Saw Palmetto down-regulated DHT- or IL-6-induced expression of prostate specific antigen in conjunction with down-regulation of the level of androgen receptor in the nucleus as measured by Western blot analysis. Moreover, Saw Palmetto down-regulated the IL-6-induced level of the phosphorylated form of STAT 3 in LNCaP cells. Furthermore, Saw Palmetto inhibited the growth of LNCaP cells present as tumor xenografts in BALB/c nude mice without adverse effect. These results indicate that Saw Palmetto might be useful for the treatment of individuals with prostate cancer.

Surface Acoustic Waves (SAW-Based Biosensing for Quantification of Cell Growth in 2D and 3D Cultures

Directory of Open Access Journals (Sweden)

Tao Wang

2015-12-01

Full Text Available Detection and quantification of cell viability and growth in two-dimensional (2D and three-dimensional (3D cell cultures commonly involve harvesting of cells and therefore requires a parallel set-up of several replicates for time-lapse or dose–response studies. Thus, developing a non-invasive and touch-free detection of cell growth in longitudinal studies of 3D tumor spheroid cultures or of stem cell regeneration remains a major unmet need. Since surface acoustic waves (SAWs permit mass loading-based biosensing and have been touted due to their many advantages including low cost, small size and ease of assembly, we examined the potential of SAW-biosensing to detect and quantify cell growth. Herein, we demonstrate that a shear horizontal-surface acoustic waves (SH-SAW device comprising two pairs of resonators consisting of interdigital transducers and reflecting fingers can be used to quantify mass loading by the cells in suspension as well as within a 3D cell culture platform. A 3D COMSOL model was built to simulate the mass loading response of increasing concentrations of cells in suspension in the polydimethylsiloxane (PDMS well in order to predict the characteristics and optimize the design of the SH-SAW biosensor. The simulated relative frequency shift from the two oscillatory circuit systems (one of which functions as control were found to be concordant to experimental data generated with RAW264.7 macrophage and A549 cancer cells. In addition, results showed that SAW measurements per se did not affect viability of cells. Further, SH-SAW biosensing was applied to A549 cells cultured on a 3D electrospun nanofiber scaffold that generate tumor spheroids (tumoroids and the results showed the device's ability to detect changes in tumor spheroid growth over the course of eight days. Taken together, these results demonstrate the use of SH-SAW device for detection and quantification of cell growth changes over time in 2D suspension cultures and in

Surface Acoustic Waves (SAW)-Based Biosensing for Quantification of Cell Growth in 2D and 3D Cultures.

Science.gov (United States)

Wang, Tao; Green, Ryan; Nair, Rajesh Ramakrishnan; Howell, Mark; Mohapatra, Subhra; Guldiken, Rasim; Mohapatra, Shyam Sundar

2015-12-19

Detection and quantification of cell viability and growth in two-dimensional (2D) and three-dimensional (3D) cell cultures commonly involve harvesting of cells and therefore requires a parallel set-up of several replicates for time-lapse or dose-response studies. Thus, developing a non-invasive and touch-free detection of cell growth in longitudinal studies of 3D tumor spheroid cultures or of stem cell regeneration remains a major unmet need. Since surface acoustic waves (SAWs) permit mass loading-based biosensing and have been touted due to their many advantages including low cost, small size and ease of assembly, we examined the potential of SAW-biosensing to detect and quantify cell growth. Herein, we demonstrate that a shear horizontal-surface acoustic waves (SH-SAW) device comprising two pairs of resonators consisting of interdigital transducers and reflecting fingers can be used to quantify mass loading by the cells in suspension as well as within a 3D cell culture platform. A 3D COMSOL model was built to simulate the mass loading response of increasing concentrations of cells in suspension in the polydimethylsiloxane (PDMS) well in order to predict the characteristics and optimize the design of the SH-SAW biosensor. The simulated relative frequency shift from the two oscillatory circuit systems (one of which functions as control) were found to be concordant to experimental data generated with RAW264.7 macrophage and A549 cancer cells. In addition, results showed that SAW measurements per se did not affect viability of cells. Further, SH-SAW biosensing was applied to A549 cells cultured on a 3D electrospun nanofiber scaffold that generate tumor spheroids (tumoroids) and the results showed the device's ability to detect changes in tumor spheroid growth over the course of eight days. Taken together, these results demonstrate the use of SH-SAW device for detection and quantification of cell growth changes over time in 2D suspension cultures and in 3D cell

Discriminating neutrino mass models using Type-II see-saw formula

Indian Academy of Sciences (India)

though a fuller analysis needs the full matrix form when all terms are present. This is followed by the normal hierarchical model (Type [III]) and inverted hierarchical model with opposite CP phase (Type [IIB]). γ ≃ 10−2 for both of them. Our main results on neutrino masses and mixings in Type-II see-saw formula are presented ...

Effect of saw palmetto extract on PI3K cell signaling transduction in human glioma.

Science.gov (United States)

Yang, Yang; Hui, Lv; Yuqin, Che; Jie, Li; Shuai, Hou; Tiezhu, Zhou; Wei, Wang

2014-08-01

Saw palmetto extract can induce the apoptosis of prostate cancer cells. The aim of the present study was to investigate the effect of saw palmetto extract on the phosphatidylinositol 3-kinase (PI3K)/Akt signaling transduction pathway in human glioma U87 and U251 cell lines. Suspensions of U87 and U251 cells in a logarithmic growth phase were seeded into six-well plates at a density of 10 4 cells/well. In the experimental group, 1 μl/ml saw palmetto extract was added, while the control group was cultured without a drug for 24 h. The expression levels of PI3K, B-cell lymphoma-extra large (Bcl-xL) and p53 were evaluated through western blot analysis. In the experimental group, the U87 and U251 cells exhibited a lower expression level of PI3K protein as compared with the control group (t=6.849; Psaw palmetto extract induces glioma cell growth arrest and apoptosis via decreasing PI3K/Akt signal transduction.

The genus Atheris (Serpentes: Viperidae) in East Africa: phylogeny and the role of rifting and climate in shaping the current pattern of species diversity.

Science.gov (United States)

Menegon, M; Loader, S P; Marsden, S J; Branch, W R; Davenport, T R B; Ursenbacher, S

2014-10-01

Past climatic and tectonic events are believed to have strongly influenced species diversity in the Eastern Afromontane Biodiversity Hotspot. We investigated the phylogenetic relationships and historical biogeography of the East African genus Atheris (Serpentes: Viperidae), and explored temporal and spatial relationships between Atheris species across Africa, and the impact of palaeoclimatic fluctuations and tectonic movements on cladogenesis of the genus. Using mitochondrial sequence data, the phylogeny of East African species of Atheris shows congruent temporal patterns that link diversification to major tectonic and aridification events within East Africa over the last 15million years (my). Our results are consistent with a scenario of a delayed direct west-east colonisation of the Eastern Arc Mountains of Atheris by the formation of the western rift. Based on the phylogenetic patterns, this terrestrial, forest-associated genus has dispersed into East Africa across a divided route, on both west-southeasterly and west-northeasterly directions (a C-shaped route). Cladogenesis in the Eastern Arc Mountains and Southern Highlands of Tanzania corresponds to late Miocene and Plio-Pleistocene climatic shifts. Taxonomically, our data confirmed the monophyly of Atheris as currently defined, and reveal four major East African clades, three of which occur in discrete mountain ranges. Possible cryptic taxa are identified in the Atheris rungweensis and A. ceratophora clades. Copyright © 2014 Elsevier Inc. All rights reserved.

SoilSaw trademark demonstration. Final report, September 1992--January 1995

International Nuclear Information System (INIS)

Saugier, K.; Isaac, R.E.

1996-02-01

The US Department of Energy (DOE) has identified leaking underground storage tanks and buried mixed waste at numerous sites within the DOE complex. Preventing these wastes from entering the environment is a challenging task. One method of preventing waste migration is to isolate the contaminants using subsurface containment barriers. Isolation and containment can be accomplished by both in situ and ex situ methods. This report describes a novel in situ construction method of forming vertical containment barriers (slurry walls) using the SoilSaw trademark Barrier System. The SoilSaw trademark Barrier System is shown to be a feasible process for constructing subsurface vertical containment barriers to depths of fifty feet. The process is most efficient in sandy soil (including free flowing sand) with barrier construction rates of over 130 square feet per minute. Productivity diminishes to approximately 30 square feet per minute as soils become harder and more cohesive. The present hardware is designed to form a barrier of approximately 12 inch in width. Additional barrier widths can be constructed with this technology by application of wider jet heads. The requirement for a varied arrangement of barrier widths is an increase in hydraulic horse power and additional jet heads

SoilSaw{trademark} demonstration. Final report, September 1992--January 1995

Energy Technology Data Exchange (ETDEWEB)

Saugier, K.; Isaac, R.E.

1996-02-01

The US Department of Energy (DOE) has identified leaking underground storage tanks and buried mixed waste at numerous sites within the DOE complex. Preventing these wastes from entering the environment is a challenging task. One method of preventing waste migration is to isolate the contaminants using subsurface containment barriers. Isolation and containment can be accomplished by both in situ and ex situ methods. This report describes a novel in situ construction method of forming vertical containment barriers (slurry walls) using the SoilSaw{trademark} Barrier System. The SoilSaw{trademark} Barrier System is shown to be a feasible process for constructing subsurface vertical containment barriers to depths of fifty feet. The process is most efficient in sandy soil (including free flowing sand) with barrier construction rates of over 130 square feet per minute. Productivity diminishes to approximately 30 square feet per minute as soils become harder and more cohesive. The present hardware is designed to form a barrier of approximately 12 inch in width. Additional barrier widths can be constructed with this technology by application of wider jet heads. The requirement for a varied arrangement of barrier widths is an increase in hydraulic horse power and additional jet heads.

Storage ring free electron lasers and saw-tooth instability

CERN Document Server

Dattoli, Giuseppe; Migliorati, M; Palumbo, L; Renieri, A

1999-01-01

We show that Free Electron Lasers (FEL) operating with storage rings may counteract beam instabilities of the Saw Tooth (STI) type. We use a model based on a set of equations that couple those describing the FEL evolution to those accounting for the STI dynamics. The analysis provides a clear picture of the FEL-STI mutual feedback and clarifies the mechanisms of the instability inhibition. The reliability of the results is supported by a comparison with fully numerical codes.

Design and use of multiple blade slurry sawing in a production atmosphere

Science.gov (United States)

Lynah, F. P., Jr.; Ross, J. B.

1982-01-01

The technique and uses of the multiple blade slurry (MBS) saw are considered. Multiple bands of steel are arranged in a frame and the frame is reciprocated with the steel bands to a workpiece, while simultaneously applying abrasive at the point of contact. The blades wear slots in the workpiece and progress through the piece resulting in several parts of wafers. The transition to MBA from diamond slicing is justified by savings resulting from minimized kerf losses, minimized subsurface damage, and improved surface quality off the saw. This allows wafering much closer to finished thickness specifications. The current state of the art MBS technology must be significantly improved if the low cost solar array (LSA) goals are to be attained. It is concluded that although MBS will never be the answer to every wafering requirement, the economical production of wafers to LSA project specifications will be achieved.

Multiple doses of saw palmetto (Serenoa repens) did not alter cytochrome P450 2D6 and 3A4 activity in normal volunteers.

Science.gov (United States)

Markowitz, John S; Donovan, Jennifer L; Devane, C Lindsay; Taylor, Robin M; Ruan, Ying; Wang, Jun-Sheng; Chavin, Kenneth D

2003-12-01

Saw palmetto (Serenoa repens) is the most commonly used herbal preparation in the treatment of benign prostatic hyperplasia. The objective of this study was to determine whether a characterized saw palmetto product affects the activity of cytochrome P450 (CYP) 2D6 or 3A4 in healthy volunteers (6 men and 6 women). The probe substrates dextromethorphan (CYP2D6 activity) and alprazolam (CYP3A4 activity) were administered orally at baseline and again after exposure to saw palmetto (320-mg capsule once daily) for 14 days. Dextromethorphan metabolic ratios and alprazolam pharmacokinetics were determined at baseline and after saw palmetto treatment. The mean ratio of dextromethorphan to its metabolite was 0.038 +/- 0.044 at baseline and 0.048 +/- 0.080 after 14 days of saw palmetto administration (P =.704, not significant [NS]), indicating a lack of effect on CYP2D6 activity. The area under the plasma alprazolam concentration versus time curve was 476 +/- 178 h. ng. mL(-1) at baseline and 479 +/- 125 h. ng. mL(-1) after saw palmetto treatment (P =.923, NS), indicating a lack of effect on CYP3A4 activity. The elimination half-life of alprazolam was 11.4 +/- 3.1 hours at baseline and 11.6 +/- 2.7 hours after saw palmetto treatment (P =.770, NS), also indicating a lack of effect on CYP3A4 activity. Our results indicate that extracts of saw palmetto at generally recommended doses are unlikely to alter the disposition of coadministered medications primarily dependent on the CYP2D6 or CYP3A4 pathways for elimination. These conclusions must be weighed in the context of the study's limited assessments and regarded as only the initial investigation into the drug interaction potential of saw palmetto.

The effect of increasing doses of saw palmetto fruit extract on serum prostate specific antigen: analysis of the CAMUS randomized trial.

Science.gov (United States)

Andriole, Gerald L; McCullum-Hill, Christie; Sandhu, Gurdarshan S; Crawford, E David; Barry, Michael J; Cantor, Alan

2013-02-01

Saw palmetto extracts are used to treat lower urinary tract symptoms in men despite level I evidence that saw palmetto is ineffective in reducing these lower urinary tract symptoms. We determined whether higher doses of saw palmetto as studied in the CAMUS (Complementary and Alternative Medicine for Urologic Symptoms) trial affect serum prostate specific antigen levels. The CAMUS trial was a randomized, placebo controlled, double-blind, multicenter, North American trial conducted between June 5, 2008 and October 10, 2012, in which 369 men older than 45 years with an AUA symptom score of 8 to 24 were randomly assigned to placebo or dose escalation of saw palmetto, which consisted of 320 mg for the first 24 weeks, 640 mg for the next 24 weeks and 960 mg for the last 24 weeks of this 72-week trial. Serum prostate specific antigen levels were obtained at baseline and at weeks 24, 48 and 72, and were compared between treatment groups using the pooled t test and Fisher's exact test. Serum prostate specific antigen was similar at baseline for the placebo (mean ± SD 1.93 ± 1.59 ng/ml) and saw palmetto groups (2.20 ± 1.95, p = 0.16). Changes in prostate specific antigen during the study were similar, with a mean change in the placebo group of 0.16 ± 1.08 ng/ml and 0.23 ± 0.83 ng/ml in the saw palmetto group (p = 0.50). In addition, no differential effect on serum prostate specific antigen was observed between treatment arms when the groups were stratified by baseline prostate specific antigen. Saw palmetto extract does not affect serum prostate specific antigen more than placebo, even at relatively high doses. Copyright © 2013 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

FEM Analysis of Sezawa Mode SAW Sensor for VOC Based on CMOS Compatible AlN/SiO2/Si Multilayer Structure

Directory of Open Access Journals (Sweden)

Muhammad Zubair Aslam

2018-05-01

Full Text Available A Finite Element Method (FEM simulation study is conducted, aiming to scrutinize the sensitivity of Sezawa wave mode in a multilayer AlN/SiO2/Si Surface Acoustic Wave (SAW sensor to low concentrations of Volatile Organic Compounds (VOCs, that is, trichloromethane, trichloroethylene, carbon tetrachloride and tetrachloroethene. A Complimentary Metal-Oxide Semiconductor (CMOS compatible AlN/SiO2/Si based multilayer SAW resonator structure is taken into account for this purpose. In this study, first, the influence of AlN and SiO2 layers’ thicknesses over phase velocities and electromechanical coupling coefficients (k2 of two SAW modes (i.e., Rayleigh and Sezawa is analyzed and the optimal thicknesses of AlN and SiO2 layers are opted for best propagation characteristics. Next, the study is further extended to analyze the mass loading effect on resonance frequencies of SAW modes by coating a thin Polyisobutylene (PIB polymer film over the AlN surface. Finally, the sensitivity of the two SAW modes is examined for VOCs. This study concluded that the sensitivity of Sezawa wave mode for 1 ppm of selected volatile organic gases is twice that of the Rayleigh wave mode.

Wind-tunnel investigation of the thrust augmentor performance of a large-scale swept wing model. [in the Ames 40 by 80 foot wind tunnel

Science.gov (United States)

Koenig, D. G.; Falarski, M. D.

1979-01-01

Tests were made in the Ames 40- by 80-foot wind tunnel to determine the forward speed effects on wing-mounted thrust augmentors. The large-scale model was powered by the compressor output of J-85 driven viper compressors. The flap settings used were 15 deg and 30 deg with 0 deg, 15 deg, and 30 deg aileron settings. The maximum duct pressure, and wind tunnel dynamic pressure were 66 cmHg (26 in Hg) and 1190 N/sq m (25 lb/sq ft), respectively. All tests were made at zero sideslip. Test results are presented without analysis.

MicroSaw and Piezosurgery in Harvesting Mandibular Bone Blocks from the Retromolar Region: A Randomized Split-Mouth Prospective Clinical Trial.

Science.gov (United States)

Hanser, Thomas; Doliveux, Romain

The aim of this randomized prospective split-mouth clinical trial was to evaluate the outcome of bone block harvesting from the retromolar region using the MicroSaw and Piezosurgery. Fifty-three patients for extensive bilateral bone grafting procedures with or without concomitant implant placement in the maxilla and/or mandible were scheduled. In each patient, bone blocks were harvested in the retromolar area within the external oblique ridge of the mandible. Using a randomized protocol, bone blocks were harvested with the MicroSaw and Piezosurgery either from the right or the left side. Clinical outcome parameters were the comparison of osteotomy time; volume of block graft; and clinical determination of intraoperative complications such as hemorrhage, nerve injury, pain, swelling, and healing of the donor site. The mean osteotomy time for harvesting including luxating a bone block was 5.63 (± 1.37) minutes using the MicroSaw and 16.47 (± 2.74) minutes using Piezosurgery (P .05). Swelling did not appear significantly different either (P > .05), and none of the donor sites showed primary healing complications. The data described in this randomized prospective split-mouth clinical trial indicate that the MicroSaw and Piezosurgery allowed efficient and safe bone block harvesting from the external oblique ridge. Clinically, concerning harvesting time and volume of the grafts, the MicroSaw performed significantly better, whereas pain, swelling, and healing did not appear to be considerably different. Given the improved visibility, precise cut geometries, and the margin of safety afforded by the MicroSaw and Piezosurgery, they are both instruments of choice when harvesting bone from the retromolar area.

Development of a Room Temperature SAW Methane Gas Sensor Incorporating a Supramolecular Cryptophane A Coating

Directory of Open Access Journals (Sweden)

Wen Wang

2016-01-01

Full Text Available A new room temperature supra-molecular cryptophane A (CrypA-coated surface acoustic wave (SAW sensor for sensing methane gas is presented. The sensor is composed of differential resonator-oscillators, a supra-molecular CrypA coated along the acoustic propagation path, and a frequency signal acquisition module (FSAM. A two-port SAW resonator configuration with low insertion loss, single resonation mode, and high quality factor was designed on a temperature-compensated ST-X quartz substrate, and as the feedback of the differntial oscillators. Prior to development, the coupling of modes (COM simulation was conducted to predict the device performance. The supramolecular CrypA was synthesized from vanillyl alcohol using a double trimerisation method and deposited onto the SAW propagation path of the sensing resonators via different film deposition methods. Experiential results indicate the CrypA-coated sensor made using a dropping method exhibits higher sensor response compared to the unit prepared by the spinning approach because of the obviously larger surface roughness. Fast response and excellent repeatability were observed in gas sensing experiments, and the estimated detection limit and measured sensitivity are ~0.05% and ~204 Hz/%, respectively.

Evaluation of Surface Cleaning Procedures for CTGS Substrates for SAW Technology with XPS

Directory of Open Access Journals (Sweden)

Erik Brachmann

2017-11-01

Full Text Available A highly efficient and reproducible cleaning procedure of piezoelectric substrates is essential in surface acoustic waves (SAW technology to fabricate high-quality SAW devices, especially for new applications such SAW sensors wherein new materials for piezoelectric substrates and interdigital transducers are used. Therefore, the development and critical evaluation of cleaning procedures for each material system that is under consideration becomes crucial. Contaminants like particles or the presence of organic/inorganic material on the substrate can dramatically influence and alter the properties of the thin film substrate composite, such as wettability, film adhesion, film texture, and so on. In this article, focus is given to different cleaning processes like SC-1 and SC-2, UV-ozone treatment, as well as cleaning by first-contact polymer Opticlean, which are applied for removal of contaminants from the piezoelectric substrate Ca 3 TaGa 3 Si 2 O 14 . By means of X-ray photoelectron spectroscopy, the presence of the most critical contaminants such as carbon, sodium, and iron removed through different cleaning procedures were studied and significant differences were observed between the outcomes of these procedures. Based on these results, a two-step cleaning process, combining SC-1 at a reduced temperature at 30 ∘ C instead of 80 ∘ C and a subsequent UV-ozone cleaning directly prior to deposition of the metallization, is suggested to achieve the lowest residual contamination level.

Biosorption of aniline violet from aqueous solution on moringa oleifera saw dust (abstract)

International Nuclear Information System (INIS)

Javed, T.; Mirza, M.L.

2011-01-01

Batch adsorption studies were carried out to evaluate the potential of Moringa Oleifera wood saw dust for the removal of aniline violet dye from aqueous solution by optimizing different parameters such as effect of shaking time, adsorbent dose, initial adsorbate concentration etc. The experimental data was subjected to different types of linearized isotherm models such as Freundlich, Langmuir and Dubinin-Radushkevich. The Freundlich isotherm was fitted well with the data. The maximum adsorption capacity of 8.92 m mol./g of aniline violet has been observed through Freundlich isotherm by using the optimized parameters of 50 mg of adsorbent, 5 minutes of shaking time at room temperature of 25 deg. C. The sorption mean free energy from Dubinin-Radushkevich isotherm is 13.36 kJ mol 1 indicating chemisorption. Pseudo-first and Pseudo-second order kinetics models were tested for the adsorption of 1.23 X 10/sup -5) mol L/sup -1) of aniline violet onto Moringa Oleifera wood saw dust. The experimental data fitted well for Pseudo-second order model with coefficient of correlation R/sup 2/ greater or equal to 0.999. The uptake of aniline violet was also studied with the rise in temperature. Thermodynamic parameters have been evaluated and the adsorption process seems to be endothermic. The results indicate that the Moringa Oleifera wood saw dust is an efficient adsorbent for aniline violet from aqueous solutions. (author)

RELEVANSI STRATEGI DAKWAH HIZBUT TAHRIR INDONESIA DENGAN STRATEGI DAKWAH NABI MUHAMMAD SAW

Directory of Open Access Journals (Sweden)

Eunis Khoerunnisa

2017-01-01

Full Text Available Hizbut Tahrir Indonesia is a unique and phenomenal propaganda institution. For one decade (1998-2008 it has exercised a very intensive preaching, conception of Islam, enforcement of Syari’ah and the Khilafah ruling system. The purpose of this study is to determine the Hizbut Tahrir Indonesia thinking about: (1 the arguments used by Hizbut Tahrir Indonesia in preaching; (2 the purpose of the preaching of Hizbut Tahrir Indonesia; (3 the method used in the propaganda activities of Hizbut Tahrir Indonesia; (4 the program of propaganda in the view of Hizbut Tahrir Indonesia; and (5 the relevance of Hizbut Tahrir Indonesia propagation strategy with the strategy of propaganda of the Prophet Muhammad. The results showed that (1 Hizbut Tahrir Indonesia propagation argument is Surah (Chapter Ali-Imran verse 104; (2 the purpose of Hizbut Tahrir Indonesia propaganda is to hold Islamic life and to carry the Islamic propagation to the entire world and to revive Islam in the right way; (3 the method adopted by Hizbut Tahrir Indonesia in carrying out the mission is the laws of Personality which is taken from Prophet Sayings; (4 HizbutTahrir Indonesia propagation program is basically the same as Hizbut Tahrir anywhere, for espousing ideas, ideals and the same activity which reflects on propagation strategy of the Prophet; and (5 selection of Hizbut Tahrir Indonesia toward the Prophet Traditions about the propagation method applied by the Prophet Muhammad SAW tend to choose a more nuanced firm. In fact, the propagation method applied by the Prophet varies depending on the existing situation and conditions.   Hizbut Tahrir Indonesia adalah sebuah lembaga dakwah yang unik dan fenomenal. Selama kurang lebih satu dasawarsa (1998-2008 sangat intensif melakukan dakwahnya, konsepsinya tentang penegakan Syari’at Islam dan sistem pemerintahan Khilafah. Tujuan penelitian ini adalah untuk mengetahui pemikiran Hizbut Tahrir Indonesia tentang: (1 landasan yang digunakan

The effect of curve sawing two-sided cants from small diameter hardwood sawlogs on lumber and pallet part yields

Science.gov (United States)

Peter Hamner; Marshall S. White; Philip A. Araman

2006-01-01

Curve sawing is a primary log breakdown process that incorporates gang-saw technology to allow two-sided cants from logs with sweep to be cut parallel to the log surface or log axis. Since curve-sawn logs with sweep are cut along the grain, the potential for producing high quality straight-grain lumber and cants increases, and strength, stiffness, and dimensional...

Seed Yield of Long Fiber Flax (Linum usitatissimum L. Plants Depending on Rates of Sawing of Seed and Mineral Fertilization

Directory of Open Access Journals (Sweden)

М. Ф. Рибак

2010-10-01

Full Text Available Impact of rates of sawing of seed and fertilization on seed productivity of Kameniar and Irma Long Fiber Flax in the conditions of Ukrainian Woodlands are highlighted. A trustworthy proportion is established of factors influence, in particular, of the sawing and fertilization rates, on Long Fiber Flax yield formation.

Influence of Lumber Volume Maximization on Value in Sawing Hardwood Sawlogs

Science.gov (United States)

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1992-01-01

Research based on applying volume-maximizing sawing solutions to idealized hardwood log forms has shown that average lumber yield can be increased by 6 percent. It is possible, however, that a lumber volume-maximizing solution may result in a decrease in lumber grade and a net reduction in total value of sawn lumber. The objective of this study was to determine the...

A prospective, 1-year trial using saw palmetto versus finasteride in the treatment of category III prostatitis/chronic pelvic pain syndrome.

Science.gov (United States)

Kaplan, Steven A; Volpe, Michael A; Te, Alexis E

2004-01-01

This study was designed to assess the safety and efficacy of saw palmetto or finasteride in men with category III prostatitis/chronic pelvic pain syndrome (CP/CPPS). A prospective, randomized, open label, 1-year study was designed to assess the safety and efficacy of saw palmetto and finasteride in the treatment of men diagnosed with CP/CPPS. Patients were randomized to finasteride (5 mg once daily) or saw palmetto (325 mg daily) for 1 year. Patients were evaluated using the National Institutes of Health Chronic Prostatitis Symptom Index, individual domains (pain, urinary symptoms, quality of life and mean pain score) and the American Urological Association Symptom Score at baseline, 3, 6 and 12 months. A total of 64 consecutive men 24 to 58 years old (mean age 43.2) with a diagnosis of CP/CPPS were equally randomized to the 2 treatment arms. All 64 men had previously received antibiotics (duration of 3 to 93 weeks), 52 (82%) had been on alpha-blockade. There were 61, 57 and 56 patients evaluable at 3, 6 and 12 months, respectively. At 1 year mean total National Institutes of Health Chronic Prostatitis Symptom Index score decreased from 23.9 to 18.1 in the finasteride group (p saw palmetto arm (p = 0.41). In the finasteride arm the quality of life and pain domains were significantly improved at 1 year; however, urination was not. Adverse events included headache (3 cases) in the saw palmetto group and decreased libido (2 cases) in the finasteride group. At the end of the trial 13 of 32 (41%) and 21 of 32 (66%) opted to continue saw palmetto and finasteride, respectively. CP/CPPS treated with saw palmetto had no appreciable long-term improvement. In contrast, patients treated with finasteride had significant and durable improvement in all various parameters except voiding. Further studies are warranted to ascertain the mechanism and reproducibility of these effects in a placebo controlled trial.

Reflective array modeling for reflective and directional SAW transducers.

Science.gov (United States)

Morgan, D P

1998-01-01

This paper presents a new approximate method for analyzing reflective SAW transducers, with much of the convenience of the coupled-mode (COM) method but with better accuracy. Transduction accuracy is obtained by incorporating the accurate electrostatic solution, giving for example correct harmonics, and allowance for electrode width variation, in a simple manner. Results are shown for a single-electrode transducer, Natural SPUDT and DART SPUDT, each using theoretically derived parameters. In contrast to the COM, the RAM can give accurate results for short or withdrawal-weighted transducers and for wide analysis bandwidth.

Saw palmetto extracts potently and noncompetitively inhibit human alpha1-adrenoceptors in vitro

NARCIS (Netherlands)

Goepel, M.; Hecker, U.; Krege, S.; Rübben, H.; Michel, M. C.

1999-01-01

BACKGROUND: We wanted to test whether phytotherapeutic agents used in the treatment of lower urinary tract symptoms have alpha1-adrenoceptor antagonistic properties in vitro. METHODS: Preparations of beta-sitosterol and extracts of stinging nettle, medicinal pumpkin, and saw palmetto were obtained

Safety and Toxicity of Saw palmetto in the Complementary and Alternative Medicine for Urological Symptoms (CAMUS) Trial

Science.gov (United States)

Avins, Andrew L.; Lee, Jeannette Y.; Meyers, Catherine M.; Barry, Michael J.

2013-01-01

Purpose Extracts of the saw palmetto berry are used by many men in the U.S. as self-treatment for lower urinary tract symptoms due to benign prostatic hyperplasia. While the most recent data from double-blind clinical trials do not support efficacy superior to that of placebo, there are few data on the toxicity of saw palmetto. Materials and Methods 369 patients were randomized in the Complementary and Alternative Medicine for Urological Symptoms (CAMUS) trial; 357 participants are included in this modified intention-to-treat analysis. Participants were randomized to 320mg, 640mg, and 960mg daily of an ethanolic saw palmetto extract or an identical-appearing placebo, in an escalating manner at 6-month intervals, for a total of 18 months follow-up. Adverse-event assessments, vital signs, and blood and urine laboratory tests were obtained at regular intervals. Results There were no statistically significant differences between groups in rates of serious or non-serious adverse events, changes in vital signs, digital prostate exam findings, or study withdrawal rates. Overall, there were no significant inter-group differences in the occurrence of laboratory-test abnormalities; differences in individual laboratory tests were uncommon and small in magnitude. No evidence of significant dose-response phenomena were identified. Conclusions The saw palmetto extract used in the CAMUS trial showed no evidence of toxicity at doses up to three times the usual clinical dose over a period of 18 months. PMID:23063633

Knowledge and prevalence of use of saw palmetto and other herbal products among men with prostate disease in Trinidad and Tobago

Directory of Open Access Journals (Sweden)

S. Persaud

2017-09-01

Conclusion: This study demonstrates that the use of herbal products is common among men with prostate disease in Trinidad and Tobago and that saw palmetto is the most common product used. It also highlights the prevalence of unsubstantiated beliefs as well as the uncertainty about the efficacy of saw palmetto.

Emotional see-saw affects rationality of decision-making: Evidence for metacognitive impairments.

Science.gov (United States)

Folwarczny, Michał; Kaczmarek, Magdalena C; Doliński, Dariusz; Szczepanowski, Remigiusz

2018-05-01

This research investigated the cognitive mechanisms that underlie impairments in human reasoning triggered by the emotional see-saw technique. It has previously been stated that such manipulation is effective as it presumably induces a mindless state and cognitive deficits in compliant individuals. Based on the dual-system architecture of reasoning (system 2) and affective decision-making (system 1), we challenged the previous theoretical account by indicating that the main source of compliance is impairment of the meta-reasoning system when rapid affective changes occur. To examine this hypothesis, we manipulated affective feelings (system 1 processing) by violating participants' expectations regarding reward and performance in a go/no-go task in which individuals were to inhibit their responses to earn money. Aside from the go/no-go performance, we measured rationality (meta-reasoning system 2) in decision-making by asking participants to comply with a nonsensical request. We found that participants who were exposed to meta-reasoning impairments due to the emotional see-saw phenomenon exhibited mindless behavior. Copyright © 2018 Elsevier B.V. All rights reserved.

A phytochemical comparison of saw palmetto products using gas chromatography and 1H nuclear magnetic resonance spectroscopy metabolomic profiling

Science.gov (United States)

Booker, Anthony; Suter, Andy; Krnjic, Ana; Strassel, Brigitte; Zloh, Mire; Said, Mazlina; Heinrich, Michael

2014-01-01

Objectives Preparations containing saw palmetto berries are used in the treatment of benign prostatic hyperplasia (BPH). There are many products on the market, and relatively little is known about their chemical variability and specifically the composition and quality of different saw palmetto products notwithstanding that in 2000, an international consultation paper from the major urological associations from the five continents on treatments for BPH demanded further research on this topic. Here, we compare two analytical approaches and characterise 57 different saw palmetto products. Methods An established method – gas chromatography – was used for the quantification of nine fatty acids, while a novel approach of metabolomic profiling using 1H nuclear magnetic resonance (NMR) spectroscopy was used as a fingerprinting tool to assess the overall composition of the extracts. Key findings The phytochemical analysis determining the fatty acids showed a high level of heterogeneity of the different products in the total amount and of nine single fatty acids. A robust and reproducible 1H NMR spectroscopy method was established, and the results showed that it was possible to statistically differentiate between saw palmetto products that had been extracted under different conditions but not between products that used a similar extraction method. Principal component analysis was able to determine those products that had significantly different metabolites. Conclusions The metabolomic approach developed offers novel opportunities for quality control along the value chain of saw palmetto and needs to be followed further, as with this method, the complexity of a herbal extract can be better assessed than with the analysis of a single group of constituents. PMID:24417505

A phytochemical comparison of saw palmetto products using gas chromatography and (1) H nuclear magnetic resonance spectroscopy metabolomic profiling.

Science.gov (United States)

Booker, Anthony; Suter, Andy; Krnjic, Ana; Strassel, Brigitte; Zloh, Mire; Said, Mazlina; Heinrich, Michael

2014-06-01

Preparations containing saw palmetto berries are used in the treatment of benign prostatic hyperplasia (BPH). There are many products on the market, and relatively little is known about their chemical variability and specifically the composition and quality of different saw palmetto products notwithstanding that in 2000, an international consultation paper from the major urological associations from the five continents on treatments for BPH demanded further research on this topic. Here, we compare two analytical approaches and characterise 57 different saw palmetto products. An established method - gas chromatography - was used for the quantification of nine fatty acids, while a novel approach of metabolomic profiling using (1) H nuclear magnetic resonance (NMR) spectroscopy was used as a fingerprinting tool to assess the overall composition of the extracts. The phytochemical analysis determining the fatty acids showed a high level of heterogeneity of the different products in the total amount and of nine single fatty acids. A robust and reproducible (1) H NMR spectroscopy method was established, and the results showed that it was possible to statistically differentiate between saw palmetto products that had been extracted under different conditions but not between products that used a similar extraction method. Principal component analysis was able to determine those products that had significantly different metabolites. The metabolomic approach developed offers novel opportunities for quality control along the value chain of saw palmetto and needs to be followed further, as with this method, the complexity of a herbal extract can be better assessed than with the analysis of a single group of constituents. © 2014 The Authors. Journal of Pharmacy and Pharmacology published by John Wiley & Sons Ltd on behalf of Royal Pharmaceutical Society.

INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - PORTER-CABLE CIRCULAR SAW OENHP: 2001-04, VERSION A; TOPICAL

International Nuclear Information System (INIS)

Unknown

2002-01-01

Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The Porter-Cable circular saw was assessed on August 15-16, 2001 (Porter-Cable No.1 and Porter-Cable No.2, respectively). During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Porter-Cable saw is a straightforward machine for cutting wood of varying thickness. The blade is fully guarded with a fixed upper and a lower retractable guard. The lower guard retracts as the blade engages the work piece. The unit is operated with an on/off guarded trigger switch and is supported with a handgrip mounted near the front of the saw. The saw is equipped with a directional nozzle, which aims sawdust away from the operator and the line of cut. An optional vacuum system, attached to the directional nozzle, is used to remove and collect dust. During the demonstration of Porter-Cable No.1, personal noise sampling indicated that one worker was under and one was at the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) with time-weighted averages (TWA's) of 82.7 and 84.6 dBA, respectively. During the demonstration of Porter-Cable No.2, however, both workers did exceed the Action Level with TWA's of 89.7 and 90.0 dBA. These data are not entirely representative as they were gathered during a simulation and not at the actual worksite. Additional sampling should be conducted on-site, but the workers should wear hearing protection until it is determined that it is no longer necessary. The total nuisance dust sample for Porter-Cable No.1 was 3

Effects of Friction Reduction on Fiber Damage in a Saw-Type Lint Cleaner

Science.gov (United States)

U.S. cotton is at a competitive disadvantage from a fiber-quality standpoint, because lint cleaning is required for mechanically harvested cotton, and lint cleaning causes fiber damage. Lint-cleaning research has focused mainly on modifying saw-type lint cleaners, but the work reported here focuses...

FEV 1 , FVC, FEV 1 /FVVC as predictors of rhinitis among saw mill ...

African Journals Online (AJOL)

Data on sociodemographic variables, symptoms of rhinitis, etc was obtained using a modified semi structured British medical research council questionnaire while respiratory function data was measured using a spirometry. Result: A total of 400 responds comprising of 200 saw mill workers and 200 controls participated in ...

Identification and functional analysis of a novel bradykinin inhibitory peptide in the venoms of New World Crotalinae pit vipers

International Nuclear Information System (INIS)

James Graham, Robert Leslie; Graham, Ciaren; McClean, Stephen; Chen, Tianbao; O'Rourke, Martin; Hirst, David; Theakston, David; Shaw, Chris

2005-01-01

A novel undecapeptide has been isolated and structurally characterized from the venoms of three species of New World pit vipers from the subfamily, Crotalinae. These include the Mexican moccasin (Agkistrodon bilineatus), the prairie rattlesnake (Crotalus viridis viridis), and the South American bushmaster (Lachesis muta). The peptide was purified from all three venoms using a combination of gel permeation chromatography and reverse-phase HPLC. Automated Edman degradation sequencing and MALDI-TOF mass spectrometry established its peptide primary structure as: Thr-Pro-Pro-Ala-Gly-Pro-Asp-Val-Gly-Pro-Arg-OH, with a non-protonated molecular mass of 1063.18 Da. A synthetic replicate of the peptide was found to be an antagonist of bradykinin action at the rat vascular B2 receptor. This is the first bradykinin inhibitory peptide isolated from snake venom. Database searching revealed the peptide to be highly structurally related (10/11 residues) with a domain residing between the bradykinin-potentiating peptide and C-type natriuretic peptide domains of a recently cloned precursor from tropical rattlesnake (Crotalus durissus terrificus) venom gland. BIP thus represents a novel biological entity from snake venom

Improved hybridization of Fuzzy Analytic Hierarchy Process (FAHP) algorithm with Fuzzy Multiple Attribute Decision Making - Simple Additive Weighting (FMADM-SAW)

Science.gov (United States)

Zaiwani, B. E.; Zarlis, M.; Efendi, S.

2018-03-01

In this research, the improvement of hybridization algorithm of Fuzzy Analytic Hierarchy Process (FAHP) with Fuzzy Technique for Order Preference by Similarity to Ideal Solution (FTOPSIS) in selecting the best bank chief inspector based on several qualitative and quantitative criteria with various priorities. To improve the performance of the above research, FAHP algorithm hybridization with Fuzzy Multiple Attribute Decision Making - Simple Additive Weighting (FMADM-SAW) algorithm was adopted, which applied FAHP algorithm to the weighting process and SAW for the ranking process to determine the promotion of employee at a government institution. The result of improvement of the average value of Efficiency Rate (ER) is 85.24%, which means that this research has succeeded in improving the previous research that is equal to 77.82%. Keywords: Ranking and Selection, Fuzzy AHP, Fuzzy TOPSIS, FMADM-SAW.

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

Science.gov (United States)

Zhang, Jun; Dong, Chengcheng; Zhang, Hui; Li, Song; Song, Aiguo

2018-05-01

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15 mm deep into granite rock in 180 s at sawing angle of 60°, with the average power of 58.41 W, and the "weight on bit" (WOB) of 8.637 N. The 7.8 kg anchoring system is capable of providing omni-directional anchoring forces, at least 225 N normal and 157 N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.

Homologous recombination induced by doxazosin mesylate and saw palmetto in the Drosophila wing-spot test.

Science.gov (United States)

Gabriel, Katiane Cella; Dihl, Rafael Rodrigues; Lehmann, Mauricio; Reguly, Maria Luiza; Richter, Marc François; Andrade, Heloisa Helena Rodrigues de

2013-03-01

Benign prostatic hyperplasia (BPH) is the most common tumor in men over 40 years of age. Acute urinary retention (AUR) is regarded as the most serious hazard of untreated BPH. α-Blockers, such as doxazosin mesylate, and 5-α reductase inhibitors, such as finasteride, are frequently used because they decrease both AUR and the need for BPH-related surgery. An extract of the fruit from American saw palmetto plant has also been used as an alternative treatment for BPH. The paucity of information available concerning the genotoxic action of these compounds led us to assess their activity as inducers of different types of DNA lesions using the somatic mutation and recombination test in Drosophila melanogaster. Finasteride did not induce gene mutation, chromosomal mutation or mitotic recombination, which means it was nongenotoxic in our experimental conditions. On the other hand, doxazosin mesylate and saw palmetto induced significant increases in spot frequencies in trans-heterozygous flies. In order to establish the actual role played by mitotic recombination and by mutation in the genotoxicity observed, the balancer-heterozygous flies were also analyzed, showing no increment in the total spot frequencies in relation to the negative control, for both drugs. Doxazosin mesylate and saw palmetto were classified as specific inducers of homologous recombination in Drosophila proliferative cells, an event linked to the loss of heterozygosity. Copyright © 2011 John Wiley & Sons, Ltd.

Toward an Elasticity of Chip-N-Saw: Demand and Supply Models of Chip-N-Saw Stumpage in Louisiana

Directory of Open Access Journals (Sweden)

Shaun M. Tanger

2018-04-01

Full Text Available Softwood chip-n-saw (CNS is a relatively new stumpage product in the sawtimber- and pulpwood-dominated stumpage markets in the U.S. South. Based on a quarterly data series from 2003 to 2016, this study estimates the demand and supply models of the softwood CNS stumpage market in Louisiana. The two-stage least squares (2SLS results reveal that own price elasticity of demand (PED is price elastic, and the cross-price elasticity (XEDwith sawtimber approaches unit elasticity. On the supply side, CNS is price inelastic in supply (PES, but more responsive to own price changesthan sawtimber quantity supplied. Further, severance tax increases are found to decrease the supply of CNS, indicating that suppliers are responsive to severance tax incidence. As the first empirical estimation of CNS, the findings should be of interest to those involved in the analysis of Southeastern stumpage markets.

'Dear diary I saw an angel, she looked like heaven on earth': Sex ...

African Journals Online (AJOL)

'Dear diary I saw an angel, she looked like heaven on earth': Sex talk and sex ... gender, sexuality and HIV/AIDS education' and was conducted in Botswana, Kenya, ... problematising them, and without reproducing stereotypes of boys as subjects ... themselves and talk about sexual desire and the opposite sex in different

Response of Saw Palmetto to Three Herbicides During the First Growing Season

Science.gov (United States)

J.L. Michael

1980-01-01

Trimec 881 and 823 (mixture of 2,4-D; MCPP and dicamba in 2:1:0.l and 1:1:0.25 ratio respectively) and trichlopyr ester were evaluated for effectiveness against saw palmetto, Serenoa repens (Bartram) Small, when they were applied at three rates in April, June, and August. Herbicides were most effective with April applicatiorr, least effective in...

Cost of Sawing Timber (COST) Module (Version 1.0) for Windows®

Science.gov (United States)

A. Jefferson, Jr. Palmer; Janice K. Wiedenbeck; Robert W. Mayer; Robert W. Mayer

2005-01-01

The Cost of Sawing Timber (COST) Module calculates the cost of operations per minute and per thousand board feet for a hardwood sawmill. It may be used independently or as a source of cost information for use in sawmill efficiency software such as the SOLVE program. Cost figures are calculated on the basis of information entered by the user. Sawmill managers use these...

Low propagation loss in a one-port SAW resonator fabricated on single-crystal diamond for super-high-frequency applications.

Science.gov (United States)

Fujii, Satoshi; Odawara, Tatsuya; Yamada, Haruya; Omori, Tatsuya; Hashimoto, Ken-Ya; Torii, Hironori; Umezawa, Hitoshi; Shikata, Shinichi

2013-05-01

Diamond has the highest known SAW phase velocity, sufficient for applications in the gigahertz range. However, although numerous studies have demonstrated SAW devices on polycrystalline diamond thin films, all have had much larger propagation loss than single-crystal materials such as LiNbO3. Hence, in this study, we fabricated and characterized one-port SAW resonators on single-crystal diamond substrates synthesized using a high-pressure and high-temperature method to identify and minimize sources of propagation loss. A series of one-port resonators were fabricated with the interdigital transducer/ AlN/diamond structure and their characteristics were measured. The device with the best performance exhibited a resonance frequency f of 5.3 GHz, and the equivalent circuit model gave a quality factor Q of 5509. Thus, a large fQ product of approximately 2.9 × 10(13) was obtained, and the propagation loss was found to be only 0.006 dB/wavelength. These excellent properties are attributed mainly to the reduction of scattering loss in a substrate using a single-crystal diamond, which originated from the grain boundary of diamond and the surface roughness of the AlN thin film and the diamond substrate. These results show that single-crystal diamond SAW resonators have great potential for use in low-noise super-high-frequency oscillators.

Comparison of Food Habits of the Northern Saw-whet Owl (Aegolius acadicus) and the Western Screech-owl (Otus kennicottii) in Southwestern Idaho

Science.gov (United States)

Charlotte Rains

1997-01-01

I compared the breeding-season diets of Northern Saw-whet Owls (Aegolius acadicus) and Western Screech-owls (Otus kennicottii). Prey items were obtained from regurgitated pellets collected from saw-whet owl and screech-owl nests found in nest boxes in the Snake River Birds of Prey National Conservation Area in southwestern Idaho....

INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - EVOLUTION 180 CIRCULAR SAW OENHP: 2001-03, VERSION A; TOPICAL

International Nuclear Information System (INIS)

Unknown

2002-01-01

Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated gloveboxes at the Department of Energy's (DOE) Los Alamos facility. The Evolution 180 circular saw was assessed on August 14, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Evolution 180 is a portable, metal cutting circular saw with a 7-inch diameter blade. The blade is contained within the main housing and has a retractable lower blade guard to prevent operator access to the blade during operation and shutdown. The saw is equipped with a chip collector. The maximum cutting thickness for metal is one-quarter inch and can cut steel tubing and pipe 2 inches in diameter. The unit is operated with an on/off guarded trigger switch and is supported with the hand guide mounted to the side of the saw. An adjustable lever sets the depth of the cut. The machine's circuitry will automatically shut the saw motor off if excessive overload is detected during operation. The one-half hour demonstration involved vertical and horizontal cuts and blade changes. During this process, operators experienced binding of the saw. This caused the blade to become hot, causing the sawdust collected in the chip collector to smoke. Care should be exercised to use the appropriate blade for the application, operator training, and personal protective equipment (PPE). Personal noise sampling indicated that neither worker was over the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) with time-weighted averages (TWA's) of 69.1 and 68.8 dBA. The personal noise sample taken during the special demonstration with the

INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - DEWALT RECIPROCATING SAW OENHP NUMBER: 2001-01, VERSION A

International Nuclear Information System (INIS)

2002-01-01

Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The DeWalt reciprocating saw was assessed on August 13, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The DeWalt reciprocating saw is a hand-held industrial tool used for cutting numerous materials, including wood and various types of metals depending upon the chosen blade. Its design allows for cutting close to floors, corners, and other difficult areas. An adjustable shoe sets the cut at three separate depths. During the demonstration for the dismantling of the fiberglass-reinforced plywood crate, the saw was used for extended continuous cutting, over a period of approximately two hours. The dismantling operation involved vertical and horizontal cuts, saw blade changes, and material handling. During this process, operators experienced vibration to the hand and arm in addition to a temperature rise on the handgrip. The blade of the saw is partially exposed during handling and fully exposed during blade changes. Administrative controls, such as duty time of the operators and the machine, operator training, and personal protective equipment (PPE), such as gloves, should be considered when using the saw in this application. Personal noise sampling indicated that both workers were exposed to noise levels exceeding the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) with time-weighted averages (TWA's) of 88.3 and 90.6 dBA. Normally, a worker would be placed in a hearing conservation program if his TWA was greater than

Effects of pumpkin seed oil and saw palmetto oil in Korean men with symptomatic benign prostatic hyperplasia.

Science.gov (United States)

Hong, Heeok; Kim, Chun-Soo; Maeng, Sungho

2009-01-01

This study was to investigate the role of complementary and alternative medicine in the prevention and treatment of benign prostatic hyperplasia. For this purpose, a randomized, double-blind, placebo-controlled trial was performed over 12 months on 47 benign prostatic hyperplasia patients with average age of 53.3 years and international prostate symptom score over 8. Subjects received either sweet potato starch (group A, placebo, 320 mg/day), pumpkin seed oil (group B, 320 mg/day), saw palmetto oil (group C, 320 mg/day) or pumpkin seed oil plus saw palmetto oil (group D, each 320 mg/day). International prostate symptom score, quality of life, serum prostate specific antigen, prostate volume and maximal urinary flow rate were measured. In groups B, C and D, the international prostate symptom score were reduced by 3 months. Quality of life score was improved after 6 months in group D, while those of groups B and C were improved after 3 months, compared to the baseline value. Serum prostate specific antigen was reduced only in group D after 3 months, but no difference was observed in prostate volume in all treatment groups. Maximal urinary flow rate were gradually improved in groups B and C, with statistical significance after 6 months in group B and after 12 months in group C. None of the parameters were significantly improved by combined treatment with pumpkin seed oil and saw palmetto oil. From these results, it is suggested that administrations of pumpkin seed oil and saw palmetto oil are clinically safe and may be effective as complementary and alternative medicine treatments for benign prostatic hyperplasia.

Occurrence of the saw-whet owl in Florida

Science.gov (United States)

Lesser, F.H.; Stickley, A.R.

1967-01-01

On 31 October 1965 at 1000 hours we observed and collected a Saw-whet Owl (Aegolius acadicus) in adult plumage and in apparently good physical condition at Ponte Vedra, St. Johns County, Florida. The bird flew from beneath a truck to a cross beam in a garage adjoining a large, fresh-water, wooded swamp dominated by cabbage palms (Sabal palmetto). We found a regurgitated pellet and a freshly killed, partially eaten cotton mouse (Peromyscus gossypinus) beneath the truck. The bird was sent to Henry M. Stevenson for deposit in Florida State University Museum, Tallahassee (specimen no. 4092b). Dr. Stevenson found that the skull had been shattered and the gonads destroyed in collecting. Total length (before skinning) was 210 mm.

An analytical approach for the Propagation Saw Test

Science.gov (United States)

Benedetti, Lorenzo; Fischer, Jan-Thomas; Gaume, Johan

2016-04-01

The Propagation Saw Test (PST) [1, 2] is an experimental in-situ technique that has been introduced to assess crack propagation propensity in weak snowpack layers buried below cohesive snow slabs. This test attracted the interest of a large number of practitioners, being relatively easy to perform and providing useful insights for the evaluation of snow instability. The PST procedure requires isolating a snow column of 30 centimeters of width and -at least-1 meter in the downslope direction. Then, once the stratigraphy is known (e.g. from a manual snow profile), a saw is used to cut a weak layer which could fail, potentially leading to the release of a slab avalanche. If the length of the saw cut reaches the so-called critical crack length, the onset of crack propagation occurs. Furthermore, depending on snow properties, the crack in the weak layer can initiate the fracture and detachment of the overlying slab. Statistical studies over a large set of field data confirmed the relevance of the PST, highlighting the positive correlation between test results and the likelihood of avalanche release [3]. Recent works provided key information on the conditions for the onset of crack propagation [4] and on the evolution of slab displacement during the test [5]. In addition, experimental studies [6] and simplified models [7] focused on the qualitative description of snowpack properties leading to different failure types, namely full propagation or fracture arrest (with or without slab fracture). However, beside current numerical studies utilizing discrete elements methods [8], only little attention has been devoted to a detailed analytical description of the PST able to give a comprehensive mechanical framework of the sequence of processes involved in the test. Consequently, this work aims to give a quantitative tool for an exhaustive interpretation of the PST, stressing the attention on important parameters that influence the test outcomes. First, starting from a pure

Effect of Saw Dust Biochar and NPK 15:15:15 Inorganic Fertilizer on ...

African Journals Online (AJOL)

A factorialexperiment was conducted in the screen house of Bowen University, Iwo, Nigeria to examine the response of Moringa oleifera Lam. seedlings to saw dust biochar and NPK 15:15:15 inorganic fertilizer amendments. The plants were grown for twelve weeks in top soil (0-30cm) collected from an Oxisol in the ...

A SAW-Based Chemical Sensor for Detecting Sulfur-Containing Organophosphorus Compounds Using a Two-Step Self-Assembly and Molecular Imprinting Technology

Directory of Open Access Journals (Sweden)

Yong Pan

2014-05-01

Full Text Available This paper presents a new effective approach for the sensitive film deposition of surface acoustic wave (SAW chemical sensors for detecting organophosphorus compounds such as O-ethyl-S-2-diisopropylaminoethyl methylphosphonothiolate (VX containing sulfur at extremely low concentrations. To improve the adsorptive efficiency, a two-step technology is proposed for the sensitive film preparation on the SAW delay line utilizing gold electrodes. First, mono[6-deoxy-6-[(mercaptodecamethylenethio

Pulsed laser deposition of metallic films on the surface of diamond particles for diamond saw blades

International Nuclear Information System (INIS)

Jiang Chao; Luo Fei; Long Hua; Hu Shaoliu; Li Bo; Wang Youqing

2005-01-01

Ti or Ni films have been deposited on the diamond particle surfaces by pulsed laser deposition. Compressive resistance of the uncoated and coated diamond particles was measured, respectively, in the experiments. The compressive resistance of the Ti-coated diamonds particles was found much higher than that of the uncoated ones. It increased by 39%. The surface morphology is observed by the metallography microscope. The surface of the uncoated diamonds particles had many hollows and flaws, while the surface of Ni-coated diamond particles was flat and smooth, and the surface of Ti-coated diamond particles had some metal masses that stood out of the surface of the Ti-coated film. The components of the metallic films of diamond particles were examined by X-ray diffractometry (XRD). TiC was found formed on the Ti-coated diamond surface, which resulted in increased surface bonding strength between the diamond particles and the Ti films. Meanwhile, TiC also favored improving the bonding strength between the coated diamond particles and the binding materials. Moreover, the bending resistance of the diamond saw blade made of Ti-coated diamond was drastically higher than that of other diamond saw blades, which also played an important role in improving the blade's cutting ability and lifetime. Therefore, it was most appropriate that the diamond saw blade was made of Ti-coated diamond particles rather than other materials

Extension of the SUSY Les Houches Accord 2 for see-saw mechanisms

International Nuclear Information System (INIS)

Basso, L.; Belyaev, A.; Chowdhury, D.; Ghosh, D.K.; Hirsch, M.; Khalil, S.; Moretti, S.; O'Leary, B.; Porod, W.; Staub, F.

2012-01-01

The SUSY Les Houches Accord (SLHA) 2 extended the first SLHA to include various generalisations of the Minimal Supersymmetric Standard Model (MSSM) as well as its simplest next-to-minimal version. Here, we propose further extensions to it, to include the most general and well-established see-saw descriptions (types I/II/III, inverse, and linear) in both an effective and a simple gauged extension of the MSSM framework. (authors)

Combined use of isotopic fingerprint and metabolomics analysis for the authentication of saw palmetto (Serenoa repens) extracts.

Science.gov (United States)

Perini, Matteo; Paolini, Mauro; Camin, Federica; Appendino, Giovanni; Vitulo, Francesca; De Combarieu, Eric; Sardone, Nicola; Martinelli, Ernesto Marco; Pace, Roberto

2018-04-22

Saw palmetto (Serenoa repens, SP) is the most expensive oil source of the pharmaceutical and healthfood market, and its high cost and recurrent shortages have spurred the development of designer blends of fatty acids to mimic its phytochemical profile and fraudulently comply with the current authentication assays. To detect this adulteration, the combined use of isotopic fingerprint and omic analysis has been investigated, using Principal Component Analysis (PCA) to handle the complex databases generated by these techniques and to identify the possible source of the adulterants. Surprisingly, the presence of fatty acids of animal origin turned out to be widespread in commercial samples of saw palmetto oil. Copyright © 2018 Elsevier B.V. All rights reserved.

Development of liquid chromatographic methods for the determination of phytosterols in Standard Reference Materials containing saw palmetto.

Science.gov (United States)

Bedner, Mary; Schantz, Michele M; Sander, Lane C; Sharpless, Katherine E

2008-05-23

Liquid chromatographic (LC) methods using atmospheric pressure chemical ionization/mass spectrometric (APCI-MS) detection were developed for the separation and analysis of the phytosterols campesterol, cycloartenol, lupenone, lupeol, beta-sitosterol, and stigmasterol. Brassicasterol and cholesterol were also included for investigation as internal standards. The methods were used to identify and quantify the phytosterols in each of two Serenoa repens (saw palmetto) Standard Reference Materials (SRMs) developed by the National Institute of Standards and Technology (NIST). Values obtained by LC-MS were compared to those obtained using the more traditional approach of gas chromatography with flame ionization detection. This is the first reported use of LC-MS to determine phytosterols in saw palmetto dietary supplement materials.

Interference suppression using a SAW-based adaptive filter

Science.gov (United States)

Saulnier, Gary J.; Grant, Calvin J.; Das, Pankaj K.

The structure and performance of a transversal filter interference suppressor that has been constructed using a surface acoustic wave (SAW) delay line are described. The delay line operates at a center frequency of 300 MHz and has eight equally spaced taps with an intertap delay of 150 ns. In the programmable mode, the tap weights are externally controllable, and in the adaptive mode, the tap weights are adjusted using the Widrow-Hoff least-mean-squared algorithm. Experimental results are provided that illustrate the performance of the filter in both the adaptive and programmable modes. Filter responses obtained in the adaptive mode are shown, along with spectra demonstrating the corresponding interference suppression. Bit-error-rate performance results for a single-tone jammer interfering with a direct sequence spread spectrum signal are presented.

Upward Altitudinal Shifts in Habitat Suitability of Mountain Vipers since the Last Glacial Maximum.

Directory of Open Access Journals (Sweden)

Masoud Yousefi

Full Text Available We determined the effects of past and future climate changes on the distribution of the Montivipera raddei species complex (MRC that contains rare and endangered viper species limited to Iran, Turkey and Armenia. We also investigated the current distribution of MRC to locate unidentified isolated populations as well as to evaluate the effectiveness of the current network of protected areas for their conservation. Present distribution of MRC was modeled based on ecological variables and model performance was evaluated by field visits. Some individuals at the newly identified populations showed uncommon morphological characteristics. The distribution map of MRC derived through modeling was then compared with the distribution of protected areas in the region. We estimated the effectiveness of the current protected area network to be 10%, which would be sufficient for conserving this group of species, provided adequate management policies and practices are employed. We further modeled the distribution of MRC in the past (21,000 years ago and under two scenarios in the future (to 2070. These models indicated that climatic changes probably have been responsible for an upward shift in suitable habitats of MRC since the Last Glacial Maximum, leading to isolation of allopatric populations. Distribution will probably become much more restricted in the future as a result of the current rate of global warming. We conclude that climate change most likely played a major role in determining the distribution pattern of MRC, restricting allopatric populations to mountaintops due to habitat alterations. This long-term isolation has facilitated unique local adaptations among MRC populations, which requires further investigation. The suitable habitat patches identified through modeling constitute optimized solutions for inclusion in the network of protected areas in the region.

Treatment Assignment Guesses by Study Participants in a Double-Blind Dose Escalation Clinical Trial of Saw Palmetto

OpenAIRE

Lee, Jeannette Y.; Moore, Page; Kusek, John; Barry, Michael

2014-01-01

Objectives: This report assesses participant perception of treatment assignment in a randomized, double-blind, placebo-controlled trial of saw palmetto for the treatment of benign prostatic hyperplasia (BCM).

Sterile neutrino in a minimal three-generation see-saw model

Indian Academy of Sciences (India)

Sterile neutrino in a minimal three-generation see-saw model. Table 1. Relevant right-handed fermion and scalar fields and their transformation properties. Here we have defined Y. I3R· (B–L)/2. SU´2µL ¢U´1µI3R ¢U´1µB L. SU´2µL ¢UY ´1µ. Le ·Lµ Lτ. Seµ. 2R ν R. (1,1/2, 1). (1,0). 1. 1 ν·R. (1,1/2, 1). (1,0). 1. 1. ντR. (1, 1/2, 1).

Measuring Torque and Temperature in a Rotating Shaft Using Commercial SAW Sensors.

Science.gov (United States)

Silva, Diogo; Mendes, Joana C; Pereira, António B; Gégot, François; Alves, Luís N

2017-07-02

Real-time monitoring of torque in a rotating shaft is not easy to implement with technologies such as optic fiber sensors or strain gages. Surface acoustic wave (SAW) sensors are wireless and passive and can be used to monitor strain in moving parts. Commercial solutions (sensors, antennas and interrogation unit) can easily be purchased from some companies; however, they are not customized and may not meet the specificity of the measurements. In order to evaluate the adequacy of commercial off-the-shelf (COTS) solutions, temperature and strain sensors fabricated by SENSeOR (Besançon, France) were mounted on a load cell. The sensors were calibrated using a thermal chamber and a universal testing machine. The load cell was then assembled together with a steel shaft that rotated at different speeds inside an oven. The commercial antennas were replaced with an RF (radio frequency) coupler and the sensors were interrogated with the commercial interrogation unit. The influence of rotation in the accuracy on the measurements, as well as the adequacy of the sensors structure, was evaluated. It can be concluded that SAW sensors can be used to measure temperature or torque in a rotating environment; however, some customization of the components is required in order to overcome the limitations posed by COTS sensing solutions.

Microstructural and Mechanical Properties of Welded High Strength Steel Plate Using SMAW and SAW Method for LPG Storage Tanks

Science.gov (United States)

Winarto, Winarto; Riastuti, Rini; Kumeidi, Nur

2018-03-01

Indonesian government policy to convert energy consumption for domestic household from kerosene to liquefied petroleum gas (LPG) may lead to the increasing demand for LPG storage tank. LPG storage tank with a large capacity generally used the HSLA steel material of ASTM A516 Grade 70 joined by SMAW or combination between SMAW and SAW method. The heat input can affect the microstructure and mechanical properties of the weld area. The input heat is proportional to the welding current and the arc voltage, but inversely proportional to its welding speed. The result shows that the combination of SMAW-SAW process yield the lower hardness in the HAZ and the fusion zone compared to the singe SMAW process. PWHT mainly applied to reduce residual stress of welded joint. The result shows that PWHT can reduce the hardness in the HAZ and the fusion zone in comparing with the singe SMAW process. The microstructure of weld joint shows a coarser structure in the combined welding process (SMAW-SAW) comparing with the single welding process (SMAW).

Effects of saw palmetto extracts on prostate gland function in the rat

OpenAIRE

Chua, Thiam

2017-01-01

Benign prostatic hyperplasia is associated with many urinary symptoms that can severely diminish quality of life and can lead to complications including urinary tract infections and obstructive nephropathy. The cause behind BPH is not well understood. Extracts of saw palmetto (Serenoa repens) are amongst the most widely used medicinal herbal preparations, used almost exclusively to alleviate urinary symptoms related to BPH. Given that little is known about the beneficial physiological role of...

A see-saw mechanism with light sterile neutrinos

International Nuclear Information System (INIS)

McKellar, B.H.J.; Garbutt, M.; Stephenson, G.J.; Goldman, T.

2001-01-01

The usual see-saw mechanism for the generation of light neutrino masses is based on the assumption that all of the flavours of right-handed (more properly, sterile) neutrinos are heavy. If the sterile Majorana mass matrix is singular, one or more of the sterile neutrinos will have zero mass before mixing with the active (left-handed) neutrinos and be light after that mixing is introduced In particular, a rank 1 sterile mass matrix leads naturally to two pseudo-Dirac pairs, one very light active Majorana neutrino and one heavy sterile Majorana neutrino. For any pattern of Dirac masses, there exists a region of parameter space in which the two pseudo-Dirac pairs are nearly degenerate in mass. This, in turn, leads to large amplitude mixing of active states as well as mixing into sterile states

Saving electrical energy in a saw-mill; Einsparung von elektrischer Energie in einem Saegereibetrieb. Stromeinsparungen in den Bereichen Holzbearbeitung, Foerdertechnik, Holztrocknung, Absauganlagen, Druckluft, Beleuchtung

Energy Technology Data Exchange (ETDEWEB)

Wyrsch, I. [Wyrsch Technologies, Kuessnacht am Rigi (Switzerland); Dolder, M. [Ingenieurbuero Dolder, Luzern (Switzerland)

2005-01-15

This comprehensive, illustrated report for the Swiss Federal Office of Energy (SFOE) presents the findings of a project that examined the electricity consumption of saw-mills and ways in which the amount of electrical power used in such facilities could be reduced. The Schilliger Holz AG company was taken as an example of a saw-mill in Switzerland. Its power consumption in 2001 was almost 6 gigawatt-hours. The work done in the two phases of the project is described and commented on. The first phase involved the measurement and analysis of power consumption; in the second phase measures to be taken to help save energy were developed. The various machinery and installations in this saw mill are described. These include various systems for the processing of the raw timber through to finished products that include wood for building, decoration and laminates. Measurement data is presented and commented on. Potentials for saving electricity and measures to be taken are described in detail for the various processing plants in the saw-mill.

Some Fundamental Limits on SAW RFID Tag Information Capacity and Collision Resolution

Science.gov (United States)

Barton, Richard J.

2013-01-01

In this paper, we apply results from multi-user information theory to study the limits of information capacity and collision resolution for SAW RFID tags. In particular, we derive bounds on the achievable data rate per tag as a function of fundamental parameters such as tag time-bandwidth product, tag signal-to-noise ratio (SNR), and number of tags in the environment. We also discuss the implications of these bounds for tag waveform design and tag interrogation efficiency

[Application of saw palmetto fruit extract in the treatment of prostate diseases].

Science.gov (United States)

Zhan, Xu-xin; Shang, Xue-jun; Huang, Yu-feng

2015-09-01

Saw palmetto fruit extract (SPE), as a herbal product, is widely used for the treatment of benign prostatic hyperplasia (BPH) and lower urinary tract symptoms (LUTS). Recent studies show that SPE also has some therapeutic effects on chronic prostatitis, prostate cancer, sexual dysfunction, and so on. This article presents an overview on the application of SPE in the treatment of BPH, prostate cancer, and chronic prostatitis/chronic pelvic pain syndrome, with a discussion on its action mechanisms.

Learning about the scale of the solar system using digital planetarium visualizations

Science.gov (United States)

Yu, Ka Chun; Sahami, Kamran; Dove, James

2017-07-01

We studied the use of a digital planetarium for teaching relative distances and sizes in introductory undergraduate astronomy classes. Inspired in part by the classic short film The Powers of Ten and large physical scale models of the Solar System that can be explored on foot, we created lectures using virtual versions of these two pedagogical approaches for classes that saw either an immersive treatment in the planetarium or a non-immersive version in the regular classroom (with N = 973 students participating in total). Students who visited the planetarium had not only the greatest learning gains, but their performance increased with time, whereas students who saw the same visuals projected onto a flat display in their classroom showed less retention over time. The gains seen in the students who visited the planetarium reveal that this medium is a powerful tool for visualizing scale over multiple orders of magnitude. However the modest gains for the students in the regular classroom also show the utility of these visualization approaches for the broader category of classroom physics simulations.

Muscarinic and alpha 1-adrenergic receptor binding characteristics of saw palmetto extract in rat lower urinary tract.

Science.gov (United States)

Suzuki, Mayumi; Oki, Tomomi; Sugiyama, Tomomi; Umegaki, Keizo; Uchida, Shinya; Yamada, Shizuo

2007-06-01

To elucidate the in vitro and ex vivo effects of saw palmetto extract (SPE) on autonomic receptors in the rat lower urinary tract. The in vitro binding affinities for alpha 1-adrenergic, muscarinic, and purinergic receptors in the rat prostate and bladder were measured by radioligand binding assays. Rats received vehicle or SPE (0.6 to 60 mg/kg/day) orally for 4 weeks, and alpha 1-adrenergic and muscarinic receptor binding in tissues of these rats were measured. Saw palmetto extract inhibited specific binding of [3H]prazosin and [N-methyl-3H]scopolamine methyl chloride (NMS) but not alpha, beta-methylene adenosine triphosphate [2,8-(3)H]tetrasodium salt in the rat prostate and bladder. The binding activity of SPE for muscarinic receptors was four times greater than that for alpha 1-adrenergic receptors. Scatchard analysis revealed that SPE significantly reduced the maximal number of binding sites (Bmax) for each radioligand in the prostate and bladder under in vitro condition. Repeated oral administration of SPE to rats brought about significant alteration in Bmax for prostatic [3H]prazosin binding and for bladder [3H]NMS binding. Such alteration by SPE was selective to the receptors in the lower urinary tract. Saw palmetto extract exerts significant binding activity on autonomic receptors in the lower urinary tract under in vitro and in vivo conditions.

Snake venomics of the pit vipers Porthidium nasutum, Porthidium ophryomegas, and Cerrophidion godmani from Costa Rica: toxicological and taxonomical insights.

Science.gov (United States)

Lomonte, Bruno; Rey-Suárez, Paola; Tsai, Wan-Chih; Angulo, Yamileth; Sasa, Mahmood; Gutiérrez, José María; Calvete, Juan J

2012-02-16

Within the Neotropical pit vipers, a lineage of primarily Middle American snake species referred to as the "Porthidium group" includes the genera Atropoides, Cerrophidion, and Porthidium. In this study, the venom proteomes of Porthidium nasutum, P. ophryomegas, and Cerrophidion godmani from Costa Rica were analyzed, and correlated to their toxic and enzymatic activities. Their HPLC profiles revealed a higher similarity between the two Porthidium species than between these and C. godmani. Proteins belonging to nine (P. nasutum), eight (P. ophryomegas), and nine (C. godmani) families were identified by mass spectrometry or N-terminal sequencing. Final cataloging of proteins and their relative abundances confirmed the close relationship between venoms of P. nasutum and P. ophryomegas, departing from that of C. godmani. Since the latter species had been taxonomically classified as Porthidium godmani previously, our venomic analyses agree with its current generic status. Venoms of P. nasutum and P. ophryomegas, despite containing abundant metalloproteinases and serine proteinases, lack procoagulant activity on human plasma, in contrast to venom of C. godmani. The latter induced strong myotoxicity in mice, which correlates with its high proportion of phospholipases A(2), whereas venoms from the two Porthidium species, containing lower amounts of these enzymes, induced only mild muscle damage. Copyright © 2011 Elsevier B.V. All rights reserved.

Sexual dimorphism in development and venom production of the insular threatened pit viper Bothrops insularism (Serpentes: Viperidae of Queimada Grande Island, Brazil

Directory of Open Access Journals (Sweden)

S.R. Travaglia-Cardoso

2010-09-01

Full Text Available Bothrops insularis is a threatened snake endemic to Queimada Grande Island, southern coast of São Paulo, Brazil, and the occurrence of sexual abnormalities in females (females with functional ovaries and rudimentary hemipenis has been reported in this population. To date there are few data regarding developmental features of this particular species. The aim of this study was to follow some developmental features in specimens maintained in captivity for seven years in the Herpetology Laboratory at Instituto Butantan, São Paulo, Brazil. We verified a pronounced sexual dimorphism in development and venom production in the specimens analyzed. In this regard, females showed greater length, mass and amount of venom in comparison to males. Our results suggest a possible niche partitioning between the sexes that reduces (or minimizes intraspecific disharmonic interactions (eg. competition on their small living area (Queimada Grande Island. Taken together, our data suggest that males and females probably are divergent in their diets, with females feeding preferentially on endothermic prey (such as migratory birds, while males maintain the juvenile diet (with the major items being ectothermic prey.

Analysis and optimization of silicon wafers wire sawing; Analyse et optimisation du procede de decoupe de plaques de silicium

Energy Technology Data Exchange (ETDEWEB)

Rouault de Coligny, P.

2002-09-15

This work has been done at the Centre de Mise en Forme des Materiaux and supported by the Agence de l'Environnement et la Maitrise de l'Energie and Photowatt International SA. It concerns one of the stages of the production of photovoltaic solar cells: the cutting of multi-crystalline silicon wafers by wire sawing. A review of the literature combined with the observation of rough wafers shows that wire sawing involves 3-body abrasion and that material removal is achieved in a ductile manner and forms micro-chips. Therefore, the depth of indentation which is necessary for the ductile-fragile transition as shown by the review of the literature is not reached. The resulting abrasion can be described thanks to Archard's Law. The subsurface damage is 2.5 {mu}m deep. A thermal study has shown that the temperature of the cutting is no higher than about 50 deg. C and that it depends on how much heat can be evacuated by the wire. Analyzing the flaws of the wafers has enabled us to identify their origins and to find solutions. The study of the wire's wear has proved that its diameter can be reduced only if the wire is drawn continuously. Energy can be saved at various stages, the surface of the wafers can be improved, these three arguments plead for the suppression of the back and forth. A tribological device has been set up which allows us to study the abrasion of silicon in the same conditions as in the wire sawing. A mechanical model linking the bending of the wire to the parameters collected during the wire sawing process can predict how high the wire web will be in the transitional and permanent regimes, the contact pressure and the wire wear. Material removal by plane strain scratch tests has been numerically simulated. The orders of magnitude of wear coefficients are identical to those deduced from tribological simulations and to those measured on the saws. This approach has opened new prospects which will improve the process by optimizing the

Disposal of metal fragments released during polycrystalline slicing by multi-wire saw

Science.gov (United States)

Boutouchent-Guerfi, N.; Drouiche, N.; Medjahed, S.; Ould-Hamou, M.; Sahraoui, F.

2016-08-01

The environmental and economic impacts linked with solar systems are largely based on discharges of slurry generated during the various stages of sawing and cutting ingots. These discharges into the environment are subject to the general regulations on hazardous and special industrial waste disposal. Therefore, they should not be abandoned or burned in open air. The cutting of Silicon ingots leads to the production of Silicon wafers additional costs, losing more than 30% of Silicon material. Abrasive grains (Silicon Carbide) trapped between the wire and the block of Silicon need to be removed by various mechanisms to be later evacuated by slurry fragments. In the interest of decreasing operational costs during polycrystalline ingot slicing at Semiconductors Research Center, and, avoid environmental problems; it is necessary to recover the solar grade Silicon from the Silicon sawing waste. For this reason, the removal of metal fragments has become a preliminary requirement to regenerate the slurry; in addition, the solid phase needs to be separated from the liquid phase after the dissolution PEG with the solvent. In the present study, magnetic separation and centrifugation methods were adopted for metals removal, followed by the analysis of some operating parameters such as: washing time, pH, and initial concentration of Silicon. Finally, analytical, morphological and basic methods were performed in order to evaluate the efficiency of the process undertaken.

Comparison of Dust Release from Epoxy and Paint Nanocomposites and Conventional Products during Sanding and Sawing

DEFF Research Database (Denmark)

Gomez, V.; Levin, Marcus; Saber, A. T.

2014-01-01

The release of dust generated during sanding or sawing of nanocomposites was compared with conventional products without nanomaterials. Epoxy-based polymers with and without carbon nanotubes, and paints with different amounts of nano-sized titanium dioxide, were machined in a closed aerosol chamber...

Molecular cloning and characterization of satellite DNA sequences from constitutive heterochromatin of the habu snake (Protobothrops flavoviridis, Viperidae) and the Burmese python (Python bivittatus, Pythonidae).

Science.gov (United States)

Matsubara, Kazumi; Uno, Yoshinobu; Srikulnath, Kornsorn; Seki, Risako; Nishida, Chizuko; Matsuda, Yoichi

2015-12-01

Highly repetitive DNA sequences of the centromeric heterochromatin provide valuable molecular cytogenetic markers for the investigation of genomic compartmentalization in the macrochromosomes and microchromosomes of sauropsids. Here, the relationship between centromeric heterochromatin and karyotype evolution was examined using cloned repetitive DNA sequences from two snake species, the habu snake (Protobothrops flavoviridis, Crotalinae, Viperidae) and Burmese python (Python bivittatus, Pythonidae). Three satellite DNA (stDNA) families were isolated from the heterochromatin of these snakes: 168-bp PFL-MspI from P. flavoviridis and 196-bp PBI-DdeI and 174-bp PBI-MspI from P. bivittatus. The PFL-MspI and PBI-DdeI sequences were localized to the centromeric regions of most chromosomes in the respective species, suggesting that the two sequences were the major components of the centromeric heterochromatin in these organisms. The PBI-MspI sequence was localized to the pericentromeric region of four chromosome pairs. The PFL-MspI and the PBI-DdeI sequences were conserved only in the genome of closely related species, Gloydius blomhoffii (Crotalinae) and Python molurus, respectively, although their locations on the chromosomes were slightly different. In contrast, the PBI-MspI sequence was also in the genomes of P. molurus and Boa constrictor (Boidae), and additionally localized to the centromeric regions of eight chromosome pairs in B. constrictor, suggesting that this sequence originated in the genome of a common ancestor of Pythonidae and Boidae, approximately 86 million years ago. The three stDNA sequences showed no genomic compartmentalization between the macrochromosomes and microchromosomes, suggesting that homogenization of the centromeric and/or pericentromeric stDNA sequences occurred in the macrochromosomes and microchromosomes of these snakes.

The effect of purification of single-walled carbon nanotube bundles on the alcohol sensitivity of nanocomposite Langmuir-Blodgett films for SAW sensing applications

International Nuclear Information System (INIS)

Penza, M; Tagliente, M A; Aversa, P; Re, M; Cassano, G

2007-01-01

HiPco (high-pressure CO dissociation process) single-walled carbon nanotube (SWCNT) bundles containing Fe particles were purified in a two-step purification process by thermal annealing in oxygen and post-treatment in HCl. Nanocomposite films of pristine and purified SWCNTs embedded in an organic matrix of cadmium arachidate (CdA) were prepared by a Langmuir-Blodgett (LB) molecular engineering technique with a fixed weight filler content of 75 wt% onto a surface acoustic wave (SAW) transducer operating as an oscillator at a frequency of 433 MHz. The raw and purified samples were characterized at various stages of the purification process using thermogravimetric analysis (TGA), high-resolution transmission electron microscopy (HR-TEM), along with energy-dispersive x-ray spectroscopy (EDS), field emission scanning electron microscopy (FE-SEM) and x-ray diffraction (XRD). Functional characterizations of the SWCNT-nanocomposite-based SAW sensors were investigated towards methanol, isopropanol and ethanol, and demonstrated high sensitivity, reversibility, fast response and ppm level detection at room temperature. Results indicate that the sensitivity of the SAW sensors based on a nanocomposite film of oxygen-annealed SWCNTs is enhanced to the alcohols tested at room temperature. Purification of the SWCNTs in the nanocomposite film affects the SAW sensitivity to alcohol by modulating the sensing properties. The sensing mechanisms are analysed and discussed

The effect of purification of single-walled carbon nanotube bundles on the alcohol sensitivity of nanocomposite Langmuir-Blodgett films for SAW sensing applications

Energy Technology Data Exchange (ETDEWEB)

Penza, M; Tagliente, M A; Aversa, P; Re, M; Cassano, G [ENEA, Department of Physical Technologies and New Materials, SS 7, Appia, km 714-72100 Brindisi (Italy)

2007-05-09

HiPco (high-pressure CO dissociation process) single-walled carbon nanotube (SWCNT) bundles containing Fe particles were purified in a two-step purification process by thermal annealing in oxygen and post-treatment in HCl. Nanocomposite films of pristine and purified SWCNTs embedded in an organic matrix of cadmium arachidate (CdA) were prepared by a Langmuir-Blodgett (LB) molecular engineering technique with a fixed weight filler content of 75 wt% onto a surface acoustic wave (SAW) transducer operating as an oscillator at a frequency of 433 MHz. The raw and purified samples were characterized at various stages of the purification process using thermogravimetric analysis (TGA), high-resolution transmission electron microscopy (HR-TEM), along with energy-dispersive x-ray spectroscopy (EDS), field emission scanning electron microscopy (FE-SEM) and x-ray diffraction (XRD). Functional characterizations of the SWCNT-nanocomposite-based SAW sensors were investigated towards methanol, isopropanol and ethanol, and demonstrated high sensitivity, reversibility, fast response and ppm level detection at room temperature. Results indicate that the sensitivity of the SAW sensors based on a nanocomposite film of oxygen-annealed SWCNTs is enhanced to the alcohols tested at room temperature. Purification of the SWCNTs in the nanocomposite film affects the SAW sensitivity to alcohol by modulating the sensing properties. The sensing mechanisms are analysed and discussed.

Timing of millennial-scale climate change in Antarctica and Greenland during the last glacial period

DEFF Research Database (Denmark)

Blunier, T; Brook, E J

2001-01-01

A precise relative chronology for Greenland and West Antarctic paleotemperature is extended to 90,000 years ago, based on correlation of atmospheric methane records from the Greenland Ice Sheet Project 2 and Byrd ice cores. Over this period, the onset of seven major millennial-scale warmings in A....... This pattern provides further evidence for the operation of a "bipolar see-saw" in air temperatures and an oceanic teleconnection between the hemispheres on millennial time scales....

Performance, kinetics, and equilibrium of methylene blue adsorption on biochar derived from eucalyptus saw dust modified with citric, tartaric, and acetic acids.

Science.gov (United States)

Sun, Lei; Chen, Dongmei; Wan, Shungang; Yu, Zebin

2015-12-01

Biochar derived from eucalyptus saw dust modified with citric, tartaric, and acetic acids at low temperatures was utilized as adsorbent to remove methylene blue (MB) from aqueous solutions. Fourier transform infrared spectroscopy analysis showed that the carboxyl group was introduced on the biochar surface. Adsorption experiment data indicated that eucalyptus saw dust modified with citric acid showed higher MB adsorption efficiency than that modified with tartaric and acetic acids. Pseudo-second-order kinetics was the most suitable model for describing MB adsorption on biochar compared with pseudo-first-order, Elovich, and intraparticle diffusion models. The calculated values of ΔG(0) and ΔH(0) indicated the spontaneous and endothermic nature of the adsorption process. MB adsorption on biochar followed the Langmuir isotherm. The maximum adsorption capacities for eucalyptus saw dust modified with citric, tartaric, and acetic acids were 178.57, 99.01, and 29.94 mg g(-1), respectively, at 35°C. Copyright © 2015 Elsevier Ltd. All rights reserved.

Instructional Media Production for Early Childhood Education: A. B. C. Jig-Saw Puzzle, a Model

Science.gov (United States)

Yusuf, Mudashiru Olalere; Olanrewaju, Olatayo Solomon; Soetan, Aderonke K.

2015-01-01

In this paper, a. b. c. jig-saw puzzle was produced for early childhood education using local materials. This study was a production based type of research, to serve as a supplemental or total learning resource. Its production followed four phases of development referred to as information, design, production and evaluation. The storyboard cards,…

See-saw geometry and leptogenesis

International Nuclear Information System (INIS)

Di Bari, P.

2005-01-01

The representation of the see-saw orthogonal matrix in the complex plane establishes a graphical correspondence between neutrino mass models and geometrical configurations, particularly useful to study relevant aspects of leptogenesis. We first derive the CP asymmetry bound for hierarchical heavy neutrinos and then an expression for the effective leptogenesis phase, determining the conditions for maximal phase and placing a lower bound on the phase suppression for generic models. Reconsidering the lower bounds on the lightest right-handed (RH) neutrino mass M 1 and on the reheating temperature T reh , we find that models where one of the two heavier neutrino masses is dominated by the lightest right-handed (RH) neutrinos, typically arising from connections with quark masses, undergo both phase suppression and strong wash-out such that M 1 (T reh )-bar 10 11 (10 10 ) GeV. The window 10 9 GeV-bar M 1 ,T reh -bar 10 10 GeV is accessible only for a class of models where m 1 is dominated by the lightest RH neutrino, with no straightforward connections with quark masses. Within this class we describe a new scenario of thermal leptogenesis where the baryon asymmetry of the Universe is generated by the decays of the second lightest RH neutrino, such that the lower bound on M 1 disappears and is replaced by a lower bound on M 2 . Interestingly, the final asymmetry is independent on the initial conditions. We also discuss the validity of the approximation of hierarchical heavy neutrinos in a simple analytical way

Muscle activity and spine load during anterior chain whole body linkage exercises: the body saw, hanging leg raise and walkout from a push-up.

Science.gov (United States)

McGill, Stuart; Andersen, Jordan; Cannon, Jordan

2015-01-01

This study examined anterior chain whole body linkage exercises, namely the body saw, hanging leg raise and walkout from a push-up. Investigation of these exercises focused on which particular muscles were challenged and the magnitude of the resulting spine load. Fourteen males performed the exercises while muscle activity, external force and 3D body segment motion were recorded. A sophisticated and anatomically detailed 3D model used muscle activity and body segment kinematics to estimate muscle force, and thus sensitivity to each individual's choice of motor control for each task. Gradations of muscle activity and spine load characteristics were observed across tasks. On average, the hanging straight leg raise created approximately 3000 N of spine compression while the body saw created less than 2500 N. The hanging straight leg raise created the highest challenge to the abdominal wall (>130% MVC in rectus abdominis, 88% MVC in external oblique). The body saw resulted in almost 140% MVC activation of the serratus anterior. All other exercises produced substantial abdominal challenge, although the body saw did so in the most spine conserving way. These findings, along with consideration of an individual's injury history, training goals and current fitness level, should assist in exercise choice and programme design.

Characterization of Zinc Oxide (ZnO) piezoelectric properties for Surface Acoustic Wave (SAW) device

Science.gov (United States)

Rosydi Zakaria, Mohd; Johari, Shazlina; Hafiz Ismail, Mohd; Hashim, Uda

2017-11-01

In fabricating Surface Acoustic Wave (SAW) biosensors device, the substrate is one of important factors that affected to performance device. there are many types of piezoelectric substrate in the markets and the cheapest is zinc Oxide substrate. Zinc Oxide (ZnO) with its unique properties can be used as piezoelectric substrate along with SAW devices for detection of DNA in this research. In this project, ZnO thin film is deposited onto silicon oxide substrate using electron beam evaporation (E-beam) and Sol-Gel technique. Different material structure is used to compare the roughness and best piezoelectric substrate of ZnO thin film. Two different structures of ZnO target which are pellet and granular are used for e-beam deposition and one sol-gel liquid were synthesize and compared. Parameter for thickness of ZnO e-beam deposition is fixed to a 0.1kÅ for both materials structure and sol-gel was coat using spin coat technique. After the process is done, samples are annealed at temperature of 500°C for 2 hours. The structural properties of effect of post annealing using different material structure of ZnO are studied using Atomic Force Microscopic (AFM) for surface morphology and X-ray Diffraction (XRD) for phase structure.

Dynamics of vegetation and soils of oak/saw palmetto scrub after fire: Observations from permanent transects

Science.gov (United States)

Schmalzer, Paul A.; Hinkle, G. Ross

1991-01-01

Ten permanent 15 m transects previously established in two oak/saw palmetto scrub stands burned in December 1986, while two transects remained unburned. Vegetation in the greater than 0.5 m and the less than 0.5 m layers on these transects was sampled at 6, 12, 18, 24, and 36 months postburn and determined structural features of the vegetation (height, percent bare ground, total cover). The vegetation data were analyzed from each sampling by height layer using detrended correspondence analysis ordination. Vegetation data for the greater than 0.5 m layer for the entire time sequence were combined and analyzed using detrended correspondence analysis ordination. Soils were sampled at 6, 12, 18, and 24 months postburn and analyzed for pH, conductivity, organic matter, exchangeable cations (Ca, Mg, K, Na), NO3-N, NH4-N, Al, available metals (Cu, Fe, Mn, Zn), and PO4-P. Shrub species recovered at different rates postfire with saw palmetto reestablishing cover greater than 0.5 m within one year, but the scrub oaks had not returned to preburn cover greater than 0.5 m in 3 years after the fire. These differences in growth rates resulted in dominance shifts after the fire with saw palmetto increasing relative to the scrub oaks. Overall changes in species richness were minor, although changes occurred in species richness by height layers due to different growth rates. Soils of well drained and poorly drained sites differed markedly. Soil responses to the fire appeared minor. Soil pH increased at 6 and 12 months postfire; calcium increased at 6 months postburn. Nitrate-nitrogen increased at 12 months postburn. Low values of conductivity, PO4-P, Mg, K, Na, and Fe at 12 months postburn may be related to heavy rainfall the preceding month. Seasonal variability in some soil parameters appeared to occur.

Detection of coffee flavour ageing by solid-phase microextraction/surface acoustic wave sensor array technique (SPME/SAW).

Science.gov (United States)

Barié, Nicole; Bücking, Mark; Stahl, Ullrich; Rapp, Michael

2015-06-01

The use of polymer coated surface acoustic wave (SAW) sensor arrays is a very promising technique for highly sensitive and selective detection of volatile organic compounds (VOCs). We present new developments to achieve a low cost sensor setup with a sampling method enabling the highly reproducible detection of volatiles even in the ppb range. Since the VOCs of coffee are well known by gas chromatography (GC) research studies, the new sensor array was tested for an easy assessable objective: coffee ageing during storage. As reference method these changes were traced with a standard GC/FID set-up, accompanied by sensory panellists. The evaluation of GC data showed a non-linear characteristic for single compound concentrations as well as for total peak area values, disabling prediction of the coffee age. In contrast, the new SAW sensor array demonstrates a linear dependency, i.e. being capable to show a dependency between volatile concentration and storage time. Copyright © 2014 Elsevier Ltd. All rights reserved.

Constraints on the rare tau decays from μ→eγ in the supersymmetric see-saw model

International Nuclear Information System (INIS)

Ibarra, Alejandro; Simonetto, Cristoforo

2008-01-01

It is now a firmly established fact that all family lepton numbers are violated in Nature. In this paper we discuss the implications of this observation for future searches for rare tau decays in the supersymmetric see-saw model. Using the two loop renormalization group evolution of the soft terms and the Yukawa couplings we show that there exists a lower bound on the rate of the rare process μ→eγ of the form BR(μ→eγ) ∼> C x BR(τ→μγ)BR(τ→eγ), where C is a constant that depends on supersymmetric parameters. Our only assumption is the absence of cancellations among the high-energy see-saw parameters. We also discuss the implications of this bound for future searches for rare tau decays. In particular, for large regions of the mSUGRA parameter space, we show that present B-factories could discover either τ→μγ or τ→eγ, but not both

A 3-D discontinuous Galerkin Method for jet engine buzz-saw noise propagation

International Nuclear Information System (INIS)

Remaki, M.; Habashi, W.G.; Ait-Ali-Yahia, D.; Jay, A.

2002-01-01

This paper presents a 3-D methodology for solving jet engine aero-acoustics problems in the presence of strong shocks and rarefactions. For example, turbofan engines suffer from Multiple Pure Tone noise, also called Buzz-saw noise, generated by the fan when the blade rotational tip speed is supersonic. These waves are composed of a series of shocks and rarefactions produced by a coalescence of shocks due to non-uniformities in the blade spacing and in the blade stagger angles, arising from manufacturing tolerances

(Bitis; Viperidae) from the Western Cape Province, South Africa

African Journals Online (AJOL)

1997-02-25

Feb 25, 1997 ... Dwarf adders of the genus Bitis are popular in the interna- tional pet trade in reptiles, and although ... dwarf adder, B. schneideri) are already threatened, in pan, by illegal collecting for this trade (Branch .... between the eyes at the anterior edge of the orbit; I I right, 12 left circumorbitals; two scale rows ...

Recycling silicon wire-saw slurries: separation of silicon and silicon carbide in a ramp settling tank under an applied electrical field.

Science.gov (United States)

Tsai, Tzu-Hsuan; Shih, Yu-Pei; Wu, Yung-Fu

2013-05-01

The growing demand for silicon solar cells in the global market has greatly increased the amount of silicon sawing waste produced each year. Recycling kerf Si and SiC from sawing waste is an economical method to reduce this waste. This study reports the separation of Si and SiC using a ramp settling tank. As they settle in an electrical field, small Si particles with higher negative charges have a longer horizontal displacement than SiC particles in a solution of pH 7, resulting in the separation of Si and SiC. The agreement between experimental results and predicted results shows that the particles traveled a short distance to reach the collection port in the ramp tank. Consequently, the time required for tiny particles to hit the tank bottom decreased, and the interference caused by the dispersion between particles and the fluid motion during settling decreased. In the ramp tank, the highest purities of the collected SiC and Si powders were 95.2 and 7.01 wt%, respectively. Using a ramp tank, the recycling fraction of Si-rich powders (SiC tanks. Recycling Si and SiC abrasives from the silicon sawing waste is regarded as an economical solution to reduce the sawing waste. However, the separation of Si and SiC is difficult. This study reports the separation of Si and SiC using a ramp settling tank under an applied electrical field. As they settle in an electrical field, small Si particles with higher negative charges have a longer horizontal displacement than SiC particles in a solution of pH 7, resulting in the separation of Si and SiC. Compared with the rectangular tanks, the recycling fraction of Si-rich powders using a ramp tank is greater, and the proposed ramp settling tank is more suitable for industrial applications.

A high linearity downconverter for SAW-less LTE receivers

International Nuclear Information System (INIS)

Jiang Peichen; Guan Rui; Wang Wufeng; Chen Dongpo; Zhou Jianjun

2012-01-01

This paper presents a high linearity downconverter implemented in a 0.18 μm CMOS process for long term evolution (LTE) receivers without a surface acoustic wave (SAW) filter. The proposed downconverter is composed of a transconductance (G m ) stage, a passive mixer, a current buffer, a transimpedance (TIA) stage, and a DC-offset cancellation (DCOC) loop. The current buffer is utilized to provide very low load impedance for the passive mixer at high frequencies and reduce the output voltage swing induced by out-of-band blockers. This technique improves the input referred third-order intercept point (IIP3) and second-order intercept point (IIP2) of the down-converter by 4.5 dB and 11 dB, respectively. The measured results show that the proposed downconverter achieves a voltage conversion gain of 29.5 dB, double sideband noise figure of 12.7 dB, out-of-band IIP3 of 13 dBm and IIP2 of more than 62 dBm.

Personnel selection using group fuzzy AHP and SAW methods

Directory of Open Access Journals (Sweden)

Ali Reza Afshari

2017-01-01

Full Text Available Personnel evaluation and selection is a very important activity for the enterprises. Different job needs different ability and the requirement of criteria which can measure ability is different. It needs a suitable and flexible method to evaluate the performance of each candidate according to different requirements of different jobs in relation to each criterion. Analytic Hierarchy Process (AHP is one of Multi Criteria decision making methods derived from paired comparisons. Simple Additive Weighting (SAW is most frequently used multi attribute decision technique. The method is based on the weighted average. It successfully models the ambiguity and imprecision associated with the pair wise comparison process and reduces the personal biasness. This study tries to analyze the Analytic Hierarchy Process in order to make the recruitment process more reasonable, based on the fuzzy multiple criteria decision making model to achieve the goal of personnel selection. Finally, an example is implemented to demonstrate the practicability of the proposed method.

A 45° saw-dicing process applied to a glass substrate for wafer-level optical splitter fabrication for optical coherence tomography

Science.gov (United States)

Maciel, M. J.; Costa, C. G.; Silva, M. F.; Gonçalves, S. B.; Peixoto, A. C.; Ribeiro, A. Fernando; Wolffenbuttel, R. F.; Correia, J. H.

2016-08-01

This paper reports on the development of a technology for the wafer-level fabrication of an optical Michelson interferometer, which is an essential component in a micro opto-electromechanical system (MOEMS) for a miniaturized optical coherence tomography (OCT) system. The MOEMS consists on a titanium dioxide/silicon dioxide dielectric beam splitter and chromium/gold micro-mirrors. These optical components are deposited on 45° tilted surfaces to allow the horizontal/vertical separation of the incident beam in the final micro-integrated system. The fabrication process consists of 45° saw dicing of a glass substrate and the subsequent deposition of dielectric multilayers and metal layers. The 45° saw dicing is fully characterized in this paper, which also includes an analysis of the roughness. The optimum process results in surfaces with a roughness of 19.76 nm (rms). The actual saw dicing process for a high-quality final surface results as a compromise between the dicing blade’s grit size (#1200) and the cutting speed (0.3 mm s-1). The proposed wafer-level fabrication allows rapid and low-cost processing, high compactness and the possibility of wafer-level alignment/assembly with other optical micro components for OCT integrated imaging.

[From Binet and Wundt to neuropsychological measurements and behavior scales].

Science.gov (United States)

Lehmann, H E

1983-01-01

Experimental psychology was the first form of scientific psychology and saw its beginnings in Wundt's laboratory toward the end of the 19th century. Psychometric measures of cognitive functions were introduced, at about the same time, by Binet, while Galton was pioneering in studies of personality profiles. Most of the systematic work, both in the theory and practice of psychology, was focused on standardization of norms, or types and measures of normal mental functions. With the establishment of psychopharmacology as a new discipline with an important role in clinical psychiatry, there emerged an urgent need for scales that indicate the presence and measure the extent and severity of psychopathology. The AMDP scales, created in the context of the European tradition in psychopathology, are some of the most prominent and promising scales of this type.

Application of wire sawing method to decommissioning of nuclear power plant. Cutting test with turbine pedestal of thermal power plant

International Nuclear Information System (INIS)

Hasegawa, Hideki; Uchiyama, Noriyuki; Sugiyama, Kazuya; Yamashita, Yoshitaka; Watanabe, Morishige

1995-01-01

It is very important to reduce radioactive waste volume, and to reduce radiation dose to workers and to the public during dismantling of the activated concrete in the decommissioning stage of a nuclear power plant. For the above, we studied a dismantling method which can separate activated concrete from non-activated concrete safely and effectively. Considering the state of legal regulation about radioactive waste disposal, and the state of developing of decommissioning technologies, we come to a conclusion that wire sawing method is feasible as a concrete cutting method. This study was carried out to evaluate the availability of the wire sawing method to dismantling of concrete structures of nuclear power plants. This study consists of concrete cutting rate test and concrete block cutting test. The former is to obtain data about cutting rate with various steel ratios while the latter is to obtain data about working time and man hour of the whole work with wire sawing. Thirty-six year old turbine pedestal of a thermal power plant was selected as a test piece to simulate actual decommissioning work of nuclear power plant, taking its massive concrete volume and age. Taking account of the handling in the building, the wire sawing machine with motor driven was used in this study considering that it did not produce exhaust gas. The concrete cutting rate test was performed with parameter of steel ratio in the concrete, wire tension and cutting direction. In the concrete block cutting test, imaging the actual cutting situation, cubic blocks which side was approximately 1 meter were taken out, and a large block to be cut and to be taken out is a section of 1m x 1.5m x 10m. Test results are shown below. The difference of cutting rate was mainly caused by the difference of reinforcement steel ratio. Working time data of installation, removal of machines and cutting were obtained. Data on secondary waste (dust, drainage and sludge) and environmental effect (noise and

Herb-drug interactions. Interactions between saw palmetto and prescription medications.

Science.gov (United States)

Bressler, Rubin

2005-11-01

Patients over age 50 typically present with one chronic disease per decade. Each chronic disease typically requires long-term drug therapy, meaning most older patients require several drugs to maintain health. Simultaneously, use of complementary and alternative medicine (CAM) has increased in the United States in the last 20 years, reaching 36% in 2002; herbal medicine use accounts for approximately 22% of all CAM use. Older adults often add herbal medicines to prescription medications, yet do not always inform their physicians. The drug metabolizing enzyme systems process all compounds foreign to the body, including prescription and herbal medications. Therefore use of both medicinals simultaneously has a potential for adverse interactions. This review, which discusses saw palmetto, is the last in a series covering the documented interactions among the top 5 efficacious herbal medicines and prescription drugs.

Using of sawing quartzite fine residual for obtaining ceramic coating

International Nuclear Information System (INIS)

Nobrega, L.F.P.M.; Souza, M.M.

2016-01-01

Quartzite is a metamorphic rock that is consisting mainly of quartz. In Paraiba there is a mining activity of this rock, in the region of Varzea and Junco do Serido especially where many wastes are created, including the sawing residue. The objective is to use the waste cited as the ceramic component coating mass, thereby replacing the quartz. Initially, the raw materials samples were taken and the chemical analysis was done of them. This passed the comminution process to achieve the required minimum particle size. After this, a formulation which added the residue in ceramic mass was made. The specimens were subjected to sintering and it was later made physical tests according to NBR 13818. The results show that the residue can replace the quartz ceramic mass successfully, but not as good as the original raw material. (author)

Microstructure-mediated Optical Effects in Southern African Snakes

Directory of Open Access Journals (Sweden)

Singh Ishan

2017-01-01

Full Text Available The scales of the African Viper Bitis arietans were tested for optical effects. Spectral intensity was recorded at incident angles over the visible spectrum for dark, pale, and ventral scale regions. The lowest spectral intensity recordings were associated with scales which have the greatest level of micro-structuring. Our results indicate that scale appearance in B. arietans is a product of microstructure-mediated optical effects. The optical effect may play a role in improving the ecological performance of the snake in its natural environment.

Dissecting the fuel element replacement machine in the NPP Muehlheim-Kaerlich using a wire saw

International Nuclear Information System (INIS)

Keller, Melanie; Ambos, Frank; Platt, Klaus

2008-01-01

By the end of 2000 the NPP Muehlheim-Kaerlich is decommissioned and has to be dismantled. The authors describe the demolition of the fuel element replacement machine. The work is aimed to declassify the waste without restraints for conventional disposal. Within 7 weeks the component has to be dissected using a wire saw. The authors describe the concept and its adaptation to the boundary conditions and experiences during the realization of the demolition concept.

The effect of biochar, cocopeat and saw dust compost on the growth of two dipterocarps seedlings

Directory of Open Access Journals (Sweden)

MARJENAH

2016-01-01

Full Text Available Abstract. Marjenah, Kiswanto, Purwanti S, Sofyan FPM. 2016. The effect of biochar, cocopeat and saw dust compost on the growth of two dipterocarps seedlings. Nusantara Bioscience 8: 39-44. Good growing media contains enough nutrients, light textured, and have the capacity to hold water to create conditions that can support plant growth. The growing media used for propagation has several requirements, that is firm and dense to enhance the growth of stems, has the capability to hold water, guarantee the plant life, and moderate humidity. This study attempts to evaluate the effect of biochar, cocopeat, and saw dust compost on the growth of Dryobalanops aromatica and Shorea balangeran seedlings. An experiment was conducted by using completely randomized block design (CRBD in factorial with two factors, namely growing media (top soil 100%; top soil 80% + saw dust compost 20%; top soil 80% + biochar 20%, top soil 80% + 20% coco peat and two species of dipterocarps seedlings (D. aromatica and S. balangeran. The experiment was carried out in a Forestry Faculty nursery during 3 months. To determine the best growth media, the vegetative parameters of seedlings were measured and the data were statistically analyzed. Survival rates of both of seedlings showed good specification in all types of growing media. The survival rates of D. aromatica for 100% top soil (control; 80% top soil+ 20% sawdust compost; 80% topsoil + 20% biochar; 80% top soil + 20% cocopeat are 100%; 100%; 97.78% and 97.78%; respectively. S. balangeran are 93.33%; 100%; 100%; 97.78%. Quality Index of D. aromatica 100% top soil (control; 80% top soil+ 20% sawdust compost; 80% topsoil + 20% biochar; 80% top soil + 20% cocopeat that are 0.15; 0.14; 0.10; and 0.10; and for S. balangeran 0.09; 0.38; 0.05 and 0.07 respectively.

Prediction of Performance of Diamond Wire Saw with Respect to Texture Characteristics of Rock / Prognozowanie Wydajności Pracy Strunowej Piły Diamentowej W Odniesieniu Do Charakterystyki Tekstury Skał

Science.gov (United States)

Ghaysari, N.; Ataei, M.; Sereshki, F.; Mikaiel, R.

2012-12-01

In this study, prediction of production rate in diamond wire saw has been investigated. Performance measurements of diamond wire saw carried out in 7 different quarries of carbonate rocks in Iran. For determination textural properties, rock samples were collected from these quarries. At first, a thin section was prepared for each rock and then 5 digital photographs were taken from each section. After this, all images were digitized using AutoCAD software. Then, area, perimeter, longest diameter and shortest diameter were assigned. According to these parameters, all of the other textural characteristics and texture coefficient were determined too. The correlation between sawing rate and textural characteristics were evaluated using multiple and simple regression analyses. Then developed model was validated by P-value test. It was concluded that area, perimeter, diameter equivalent and index of grain size homogeneity are very effective on production rate. Production rate using diamond wire saw can reliably be predicted using developed model.

Machine Selection in A Dairy Product Company with Entropy and SAW Method Integration

Directory of Open Access Journals (Sweden)

Aşkın Özdağoğlu

2017-07-01

Full Text Available Machine selection is an important and difficult process for the firms, and its results may generate more problems than anticipated. In order to find the best alternative, managers should define the requirements of the factory and determine the necessary criteria. On the other hand, the decision making criteria in order to choose the right equipment may vary according to the type of the manufacturing facility, market requirements, and consumer assigned criteria. This study aims to find the best machine alternative  among  the three machine offerings according to twelve evaluation criteria by integrating entropy method with SAW method.

Use of refractory chromites for obtaining fluxes amassed employed in submerged arc welding (SAW); Empleo de cromitas refractarias par la obtencion de fundentes aglomerados utilizados en la soldadura automatica por arco sumegido (SAW)

Energy Technology Data Exchange (ETDEWEB)

Perdomo-Gonzalez, L.; Quintana-Puchol, R.; Cruz-Crespo, A.; Castellanos-Estupinan, J.; Garcia-Sanchez, L. L.; Formoso-Prego, A.; Cores-Sanchez, A.

2003-07-01

In the present work high carbon ferrochrome (load ferrochrome) and slags are obtained, starting from the metallurgic reductive processing of refractory chromites. The obtaining of alloys and slags is studied using an experiment design based in the relationships among components. The chemical compositions of alloys and slags guarantee their application for the conformation of alloys loads and matrix fluxes amassed for the superficial filling by means of submerged arc welding (SAW). The melting-reduction process is carried out in an electric arc furnace. (Author) 16 refs.

Temperature coefficient of elastic constants of SiO2 over-layer on LiNbO3 for a temperature stable SAW device

International Nuclear Information System (INIS)

Tomar, Monika; Gupta, Vinay; Sreenivas, K

2003-01-01

The influence of sputtered SiO 2 over-layer on the SAW propagation characteristics of a 128 deg. rotated Y-cut X-propagating lithium niobate SAW filter has been studied. Experimentally measured SAW phase velocity and temperature coefficient of delay (TCD), with varying SiO 2 over-layer thickness, show a significant deviation from the theoretically calculated values using the bulk material parameters of SiO 2 . The observed deviation is attributed to the differences in the material parameters (density, elastic and dielectric constants and their temperature coefficient) of the deposited SiO 2 over-layer. The density and the dielectric constant of the deposited SiO 2 layer were determined separately, and the elastic constants and their temperature coefficients were estimated by fitting the experimental velocity and TCD data, respectively. The deviation in the dielectric constant and the density in comparison to the bulk was insignificant, and the estimated values of the elastic constants (C 11 = 0.75x10 11 N m -2 and C 44 0.225x10 11 N m -2 ) were found to be lower, and the respective temperature coefficients (5.0x10 -4 deg C -1 and 2.0x10 -4 deg C -1 ) were high in comparison to the bulk material parameters

The Effect of Nitrogen and Titanium on the Toughness of High Strength Saw Weld Deposits

Science.gov (United States)

1989-05-12

2.3 CCT diagram for typical SAW steel welds [8]. 26 Figure 2.4 Oxygen and nitrogen levels expected from several arc 31 welding processes [10]. Figure...alloyed ferritic weld metal such formation is achieved if the CCT diagram is displaced towards longer times. However, it is worth noting that too large...dilution and cooling rate [5]. In this context, the CCT diagram is often used to denote the transformations that occur in weld metal samples which

In vivo assessment of botanical supplementation on human cytochrome P450 phenotypes: Citrus aurantium, Echinacea purpurea, milk thistle, and saw palmetto.

Science.gov (United States)

Gurley, Bill J; Gardner, Stephanie F; Hubbard, Martha A; Williams, D Keith; Gentry, W Brooks; Carrier, Julie; Khan, Ikhlas A; Edwards, David J; Shah, Amit

2004-11-01

Phytochemical-mediated modulation of cytochrome P450 (CYP) activity may underlie many herb-drug interactions. Single-time point phenotypic metabolic ratios were used to determine whether long-term supplementation of Citrus aurantium , Echinacea purpurea , milk thistle (Silybum marianum), or saw palmetto (Serenoa repens) extracts affected CYP1A2, CYP2D6, CYP2E1, or CYP3A4 activity. Twelve healthy volunteers (6 women, 6 men) were randomly assigned to receive C aurantium , E purpurea , milk thistle, or saw palmetto for 28 days. For each subject, a 30-day washout period was interposed between each supplementation phase. Probe drug cocktails of midazolam and caffeine, followed 24 hours later by chlorzoxazone and debrisoquin (INN, debrisoquine), were administered before (baseline) and at the end of supplementation. Presupplementation and postsupplementation phenotypic trait measurements were determined for CYP3A4, CYP1A2, CYP2E1, and CYP2D6 by use of 1-hydroxymidazolam/midazolam serum ratios (1-hour sample), paraxanthine/caffeine serum ratios (6-hour sample), 6-hydroxychlorzoxazone/chlorzoxazone serum ratios (2-hour sample), and debrisoquin urinary recovery ratios (8-hour collection), respectively. The content of purported "active" phytochemicals was determined for each supplement. Comparisons of presupplementation and postsupplementation phenotypic ratios suggested that these particular supplements had no significant effect on CYP1A2, CYP2D6, CYP2E1, or CYP3A4 activity. Phytochemical profiles indicated that C aurantium was devoid of the CYP3A4 inhibitor 6',7'-dihydroxybergamottin. Quantities of fatty acids, flavonolignans, and cichoric acid were consistent with label claims for saw palmetto, milk thistle, and E purpurea , respectively. Botanical supplements containing C aurantium , milk thistle, or saw palmetto extracts appear to pose a minimal risk for CYP-mediated herb-drug interactions in humans. Although the effects of E purpurea on CYP activity were minor, further

Public sector pay gap in Serbia during large-scale privatisation, by educational qualification

OpenAIRE

Laušev Jelena

2012-01-01

The paper explores the effect of large-scale privatization of public sector activities on public-private sector pay differential, for groups of workers according to educational qualification on average and across the pay distribution in Serbia, from 2004 until 2008. The paper finds that both unskilled and skilled men and women in the public sector saw significant improvements in their financial position relative to their private sector counterparts with the progress of the economic tran...

On the Old Saw That Dialogue Is a Socratic but Not an Aristotelian Method of Moral Education

Science.gov (United States)

Kristjánsson, Kristján

2014-01-01

Kristján Kristjánsson's aim in this article is to bury the old saw that dialogue is exclusively a Socratic but not an Aristotelian method of education for moral character. Although the truncated discussion in Aristotle's "Nicomachean Ethics" of the character development of the young may indicate that it is merely the result of…

Venomous snakes of Costa Rica: biological and medical implications of their venom proteomic profiles analyzed through the strategy of snake venomics.

Science.gov (United States)

Lomonte, Bruno; Fernández, Julián; Sanz, Libia; Angulo, Yamileth; Sasa, Mahmood; Gutiérrez, José María; Calvete, Juan J

2014-06-13

In spite of its small territory of ~50,000km(2), Costa Rica harbors a remarkably rich biodiversity. Its herpetofauna includes 138 species of snakes, of which sixteen pit vipers (family Viperidae, subfamily Crotalinae), five coral snakes (family Elapidae, subfamily Elapinae), and one sea snake (Family Elapidae, subfamily Hydrophiinae) pose potential hazards to human and animal health. In recent years, knowledge on the composition of snake venoms has expanded dramatically thanks to the development of increasingly fast and sensitive analytical techniques in mass spectrometry and separation science applied to protein characterization. Among several analytical strategies to determine the overall protein/peptide composition of snake venoms, the methodology known as 'snake venomics' has proven particularly well suited and informative, by providing not only a catalog of protein types/families present in a venom, but also a semi-quantitative estimation of their relative abundances. Through a collaborative research initiative between Instituto de Biomedicina de Valencia (IBV) and Instituto Clodomiro Picado (ICP), this strategy has been applied to the study of venoms of Costa Rican snakes, aiming to obtain a deeper knowledge on their composition, geographic and ontogenic variations, relationships to taxonomy, correlation with toxic activities, and discovery of novel components. The proteomic profiles of venoms from sixteen out of the 22 species within the Viperidae and Elapidae families found in Costa Rica have been reported so far, and an integrative view of these studies is hereby presented. In line with other venomic projects by research groups focusing on a wide variety of snakes around the world, these studies contribute to a deeper understanding of the biochemical basis for the diverse toxic profiles evolved by venomous snakes. In addition, these studies provide opportunities to identify novel molecules of potential pharmacological interest. Furthermore, the

New Natural Pigment Fraction Isolated from Saw Palmetto: Potential for Adjuvant Therapy of Hepatocellular Carcinoma

Directory of Open Access Journals (Sweden)

Hor-Yue Tan

2016-08-01

Full Text Available For the first time, we discovered a small proportion of aqueous fraction from Saw Palmetto apart from the fatty acid-rich fraction exhibited pharmacological activity. Therefore, this study aims to explore the anti-tumor potential of red pigmented aqueous fraction of Saw Palmetto, NYG on human hepatocellular carcinoma and its possible targets. Subcutaneous xenograft and orthotopic implantation models of HCC were used to evaluate the tumor inhibitory effect of NYG. Human hepatocellular carcinoma (HCC cell lines and human umbilical vein endothelial cells (HUVEC were used as in vitro model. The mRNA expression was conducted by qPCR. Protein expression was monitored by immunoblotting and immunohistochemistry. Cell migration and blood vessel formation were determined by chamber assay and tube formation assay, respectively. Significant tumor inhibition of NYG in dose-dependent manner was observed on subcutaneous xenograft and orthotopic HCC model. NYG has no direct action on cell viability or VEGF secretion of HCC cells. However, NYG reduced in vitro migration and vessel formation activities of HUVEC cells, as well as in vivo intratumoral neovascularization. NYG attenuated extracellular signal-regulated kinases (ERK activation in endothelial cells, which may be associated with the suppression of migration and tube formation of HUVEC. NYG suppressed tumor expansion of HCC via inhibiting neovascularization, and may be potential adjuvant treatment for HCC.

New Natural Pigment Fraction Isolated from Saw Palmetto: Potential for Adjuvant Therapy of Hepatocellular Carcinoma.

Science.gov (United States)

Tan, Hor-Yue; Wang, Ning; Takahashi, Masao; Feng, Yigang; Li, Hongyun; Feng, Yibin

2016-08-05

For the first time, we discovered a small proportion of aqueous fraction from Saw Palmetto apart from the fatty acid-rich fraction exhibited pharmacological activity. Therefore, this study aims to explore the anti-tumor potential of red pigmented aqueous fraction of Saw Palmetto, NYG on human hepatocellular carcinoma and its possible targets. Subcutaneous xenograft and orthotopic implantation models of HCC were used to evaluate the tumor inhibitory effect of NYG. Human hepatocellular carcinoma (HCC) cell lines and human umbilical vein endothelial cells (HUVEC) were used as in vitro model. The mRNA expression was conducted by qPCR. Protein expression was monitored by immunoblotting and immunohistochemistry. Cell migration and blood vessel formation were determined by chamber assay and tube formation assay, respectively. Significant tumor inhibition of NYG in dose-dependent manner was observed on subcutaneous xenograft and orthotopic HCC model. NYG has no direct action on cell viability or VEGF secretion of HCC cells. However, NYG reduced in vitro migration and vessel formation activities of HUVEC cells, as well as in vivo intratumoral neovascularization. NYG attenuated extracellular signal-regulated kinases (ERK) activation in endothelial cells, which may be associated with the suppression of migration and tube formation of HUVEC. NYG suppressed tumor expansion of HCC via inhibiting neovascularization, and may be potential adjuvant treatment for HCC.

Santa Ana Winds of Southern California: Their Climatology and Variability Spanning 6.5 Decades from Regional Dynamical Modelling

Science.gov (United States)

Guzman-Morales, J.; Gershunov, A.

2015-12-01

Santa Ana Winds (SAWs) are an integral feature of the regional climate of Southern California/Northern Baja California region. In spite of their tremendous episodic impacts on the health, economy and mood of the region, climate-scale behavior of SAW is poorly understood. In the present work, we identify SAWs in mesoscale dynamical downscaling of a global reanalysis product and construct an hourly SAW catalogue spanning 65 years. We describe the long-term SAW climatology at relevant time-space resolutions, i.e, we developed local and regional SAW indices and analyse their variability on hourly, daily, annual, and multi-decadal timescales. Local and regional SAW indices are validated with available anemometer observations. Characteristic behaviors are revealed, e.g. the SAW intensity-duration relationship. At interdecadal time scales, we find that seasonal SAW activity is sensitive to prominent large-scale low-frequency modes of climate variability rooted in the tropical and north Pacific ocean-atmosphere system that are also known to affect the hydroclimate of this region. Lastly, we do not find any long-term trend in SAW frequency and intensity as previously reported. Instead, we identify a significant long-term trend in SAW behavior whereby contribution of extreme SAW events to total seasonal SAW activity has been increasing at the expense of moderate events. These findings motivate further investigation on SAW evolution in future climate and its impact on wildfires.

Binary Channel SAW Mustard Gas Sensor Based on PdPc0.3PANI0.7 hybrid Sensitive Film

International Nuclear Information System (INIS)

Shi, Y B; Xiang, J J; Feng, Q H; Hu, Z P; Zhang, H Q; Guo, J Y

2006-01-01

This paper discussed the working principle of binary channel surface acoustic wave (SAW) lithium niobate piezoelectric chip detecting mustard, established the mathematic model of beat frequency output Δf and the mustard gas density δ. The MEMS craft solved the parameters of the binary channel SAW chip such as its interdigital electrode number was 15∼25 couple, width and spacing were both 25μm, degree of overlapping was 2mm, fundamental frequency was 10∼35MHz, frequency-domain width was 5∼20Hz, and its back pt hot film's. According to TG-DSC thermal analysis, vacuum coating craft was adopted to solve the hybrid sensitive film forming craft parameter of PdPc 0.3 PANI 0.7 (phthalocyanine palladium 0.3 Poiyaniline 0.7 ). The micro-appearance of sensitive film was analyzed through SEM. The sensor's sensitivity and response characteristic were tested and analyzed: appear linear change, its response time is less than 5min while its recovery time is less than 8min

Preparation and pigmented polyester coating of saw dust particle board using ultraviolet irradiation

International Nuclear Information System (INIS)

Darsono; Sugiarto Danu; Anik Sunarni

2010-01-01

Experiments on the preparation and pigmented polyester coating of saw dust particle board have been conducted using ultra-violet (UV) radiation curing. The adhesive used for preparation of particle board was the mixture of eugenol and isoeugenol residue as by product of clover oil distillation. Dry saw dust (20 – 40 mesh) was mixed with adhesive at concentration of 16 % b.w. The mixture then was hot pressed at 160, 170, and 180 kg/cm 2 , temperature of 160 °C for 30 minutes. Particle boards obtained have the density of 0.85 - 92 g/cm 3 , water content of 5.4 – 6.8 % and thickness swelling 45 – 62 % ( 2 hr immersion) and unmeasurable for 24 hr immersion due to brittle condition. It was found that particle boards have properties of modulus of rupture = 64 – 71 kgf/cm 2 , modulus of elasticity = 402 – 447 kgf/ cm 2 , and internal bond of 0.52 – 0.57 kgf/cm 2 . Cured coating made of the mixture of polyester resin, photoinitiator (2 and 3 % b.w) and pigment (1 and 2 % b.w) on particle board and irradiated at 1 – 4 m/min have pendulum hardness = 25.0 – 63.9 sec, pencil hardness = HB – 2H, % remaining = 92 – 100 %, glossy = 42.3 – 58.8 %, and color value of L = 54.3 – 73.9, a = -1.3 – 1.9, and b = 0.4 – 3.3. The cured coatings resist to chemical, solvent and stain, except against 10 % NaOH solution and red permanent marker stain. (author)

Estudo exploratório da utilização de saw palmetto no tratamento da hiperplasia benigna da próstata por urologistas de Porto Alegre

Directory of Open Access Journals (Sweden)

Gabriela Ferreira

Full Text Available O objetivo deste trabalho foi avaliar a utilização de fitoterápicos a base de saw palmetto na terapia sintomática da hiperplasia benigna da próstata (HBP por médicos urologistas da cidade de Porto Alegre. Consistiu em um estudo transversal, exploratório, por meio de entrevista semi-estruturada aplicada a urologistas de Porto Alegre. A amostra foi obtida utilizando catálogo do plano de saúde UNIMED- Porto Alegre. A randomização foi realizada através de sistemática aleatória, sendo sorteados trinta e cinco médicos, dos quais 21 foram selecionados para realização da pesquisa através de questionário. Todos os urologistas entrevistados avaliam e tratam pacientes com hiperplasia benigna da próstata. O saw palmetto não foi citado como terapia medicamentosa de 1ª ou 2ª escolhas no tratamento da HBP. O grupo farmacológico mais freqüentemente utilizado para o tratamento da HBP foi ∝-bloqueadores. Mais da metade dos médicos entrevistados relata ter conhecimento sobre a utilização do saw palmetto, principalmente através de artigos científicos. Os resultados indicam que o saw palmetto não é prescrito pelos urologistas em Porto Alegre, todavia a maior parte destes profissionais tem conhecimento sobre sua utilização.

Effects of snake venom from Saudi cobras and vipers on hormonal levels in peripheral blood.

Science.gov (United States)

Abdel-Galil, Khidir A; Al-Hazimi, Awdah M

2004-08-01

Knowledge about the effects of snake venoms on endocrine glands in the Kingdom of Saudi Arabia (KSA) is meager. The aim of the present study is to investigate the acute and chronic envenomation from 4 snakes out of 8 species of Saudi Cobras and Vipers on the tissues of endocrine glands and peripheral hormonal levels in male rats. The peripheral blood levels of 4 hormones mainly testosterone, cortisol, insulin and thyroxin were investigated in male Wistar rats following acute and chronic treatment of the rats with poisonous snake venoms at the Department of Physiology, Faculty of Medicine, King Abdul-Aziz University, Jeddah, Kingdom of Saudi Arabia between September 2000 to May 2001. Using radio immunoassay for hormonal analysis, a rise in testosterone levels in peripheral blood was obtained following acute treatment, which is due to the effect of the venoms on vascular permeability and increased blood flow. In contrast, the chronic treatment with venoms resulted in a delayed effect on vascular permeability and testicular degeneration resulting in a decreased blood flow and a significant drop in testosterone concentration. Cortisol levels were no different from the controls during acute treatment but it demonstrates gradual rise following chronic treatment to withstand the stress imposed on the animals. Similar results were obtained for insulin, which showed normal values with acute treatment but decreased levels of chronic treatment suggesting insulin insufficiently. Likewise, the thyroxin levels were decreased with chronic treatment suggesting a toxic effect of the poison on the rich blood supply of the thyroid follicles with a subsequent decrease in blood flow to the tissues and therefore, decreased thyroid hormone levels. The effects of venom toxicity on testosterone levels were either normal or stimulatory with acute treatment or inhibitory with chronic treatment depending on the vascular blood flow and testicular degeneration. Cortisol levels were normal at

Potency of a novel saw palmetto ethanol extract, SPET-085, for inhibition of 5alpha-reductase II.

Science.gov (United States)

Pais, Pilar

2010-08-01

The nicotinamide adenine dinucleotide phosphate (NADPH)-dependent membrane protein 5alpha-reductase irreversibly catalyses the conversion of testosterone to the most potent androgen, 5alpha-dihydrotestosterone (DHT). In humans, two 5alpha-reductase isoenyzmes are expressed: type I and type II. Type II is found primarily in prostate tissue. Saw palmetto extract (SPE) has been widely used for the treatment of lower urinary tract symptoms secondary to benign prostatic hyperplasia (BPH). The mechanisms of the pharmacological effects of SPE include the inhibition of 5alpha-reductase, among other actions. Clinical studies of SPE have been equivocal, with some showing significant results and others not. These inconsistent results may be due, in part, to varying bioactivities of the SPE used in the studies. The aim of the present study was to determine the in vitro potency of a novel saw palmetto ethanol extract (SPET-085), an inhibitor of the 5alpha-reductase isoenzyme type II, in a cell-free test system. On the basis of the enzymatic conversion of the substrate androstenedione to the 5alpha-reduced product 5alpha-androstanedione, the inhibitory potency was measured and compared to those of finasteride, an approved 5alpha-reductase inhibitor. SPET-085 concentration-dependently inhibited 5alpha-reductase type II in vitro (IC(50)=2.88+/-0.45 microg/mL). The approved 5alpha-reductase inhibitor, finasteride, tested as positive control, led to 61% inhibition of 5alpha-reductase type II. SPET-085 effectively inhibits the enzyme that has been linked to BPH, and the amount of extract required for activity is very low compared to data reported for other extracts. It can be concluded from data in the literature that SPET-085 is as effective as a hexane extract of saw palmetto that exhibited the highest levels of bioactivity, and is more effective than other SPEs tested. This study confirmed that SPET-085 has prostate health-promoting bioactivity that also corresponds favorably to

Microstructural and geometric influences in the protective scales of Atractosteus spatula.

Science.gov (United States)

Sherman, Vincent R; Yaraghi, Nicholas A; Kisailus, David; Meyers, Marc A

2016-12-01

Atractosteus spatula has been described as a living fossil (having existed for 100 Myr), retaining morphological characteristics of early ancestors such as the ability to breathe air and survive above water for hours. Its highly effective armour consists of ganoid scales. We analyse the protective function of the scales and identify key features which lead to their resistance to failure. Microstructural features include: a twisted cross-plied mineral arrangement that inhibits crack propagation in the external ganoine layer, mineral crystals that deflect cracks in the bony region in order to activate the strength of mineralized collagen fibrils, and saw-tooth ridges along the interface between the two scale layers which direct cracks away from the intrinsically weak interface. The macroscale geometry is additionally evaluated and it is shown that the scales retain full coverage in spite of minimal overlap between adjacent scales while conforming to physiologically required strain and maintaining flexibility via a process in which adjacent rows of scales slide and concurrently reorient. © 2016 The Author(s).

Theoretical bases of rotation dynamics of raw materials poller with s ratify consideration for saw gin processing of cotton

International Nuclear Information System (INIS)

Saidov, Kh.; Babaeva, A.Kh.

2005-01-01

In this paper is examined motion of raw materials rollers on the base of a stratify models. Foe every layers of the rollers are determined dynamical influences for saw gin processing of cotton. It is noticed that in the gin processing of cotton the second layer of cotton roller plagues an important role

[On the occurrence of the nematode Oswaldocruzia filiformis (Strongylida: Molineidae) in Karelia].

Science.gov (United States)

Novokhatskaia, O V

2008-01-01

Contents of the intestines of the viper Vipera berus (L., 1758) from Kizhi archipelago (Lake Onego) was examined. Helminth fauna of the viper was found to include single nematode species, Oswaldocruzia filiformis Goeze, 1782 (Strongylida: Molineidae). Prevalence of the invasion was 60%, intensity of the invasion was 1-8 specimens per host, index of abundance was 1.92 specimens. Measurements and pictures of the parasite are given. Morphometric data on the nematode from viper are compared with those from other host species.

Experimental investigation of the thickness effect for large as-welded SAW S355 steel specimens

DEFF Research Database (Denmark)

Ólafsson, Ólafur Magnús; Jensen, Jørgen Juncher; Berggreen, Christian

2016-01-01

The presented work aims to investigate and establish a pre-cise, thorough and detailed database from series of experi-mental testing of submerged arc welded (SAW) specimens of various thicknesses typically applied in ships and offshore structures and foundations. Welded structures of all sizes...... and shapes exhibit fatigue failure primarily in the welded region, rather than in the base material, due to imperfections and flaws relating to the welding procedure. The welded region has therefore received much attention from universities, re-search institutions along with industry as it is of significant...

Acousto-optical and SAW propagation characteristics of temperature stable multilayered structures based on LiNbO3 and diamond

Science.gov (United States)

Shandilya, Swati; Sreenivas, K.; Gupta, Vinay

2008-01-01

Theoretical studies on the surface acoustic wave (SAW) properties of c-axis oriented LiNbO3/IDT/diamond and diamond/IDT/128° rotated Y-X cut LiNbO3 multilayered structures have been considered. Both layered structures exhibit a positive temperature coefficient of delay (TCD) characteristic, and a zero TCD device is obtained after integrating with an over-layer of either tellurium dioxide (TeO2) or silicon dioxide (SiO2). The presence of a TeO2 over-layer enhanced the electromechanical coupling coefficients of both multilayered structures, which acts as a better temperature compensation layer than SiO2. The temperature stable TeO2/LiNbO3/IDT/diamond layered structure exhibits good electromechanical coefficient and higher phase velocity for SAW device applications. On the other hand, a high acousto-optical (AO) figure of merit (30-37) × 10-15 s3 kg-1 has been obtained for the temperature stable SiO2/diamond/IDT/LiNbO3 layered structure indicating a promising device structure for AO applications.

Acousto-optical and SAW propagation characteristics of temperature stable multilayered structures based on LiNbO3 and diamond

International Nuclear Information System (INIS)

Shandilya, Swati; Sreenivas, K; Gupta, Vinay

2008-01-01

Theoretical studies on the surface acoustic wave (SAW) properties of c-axis oriented LiNbO 3 /IDT/diamond and diamond/IDT/128 0 rotated Y-X cut LiNbO 3 multilayered structures have been considered. Both layered structures exhibit a positive temperature coefficient of delay (TCD) characteristic, and a zero TCD device is obtained after integrating with an over-layer of either tellurium dioxide (TeO 2 ) or silicon dioxide (SiO 2 ). The presence of a TeO 2 over-layer enhanced the electromechanical coupling coefficients of both multilayered structures, which acts as a better temperature compensation layer than SiO 2 . The temperature stable TeO 2 /LiNbO 3 /IDT/diamond layered structure exhibits good electromechanical coefficient and higher phase velocity for SAW device applications. On the other hand, a high acousto-optical (AO) figure of merit (30-37) x 10 -15 s 3 kg -1 has been obtained for the temperature stable SiO 2 /diamond/IDT/LiNbO 3 layered structure indicating a promising device structure for AO applications

SAW RFID-Tags for Mass-Sensitive Detection of Humidity and Vapors

Directory of Open Access Journals (Sweden)

Gerhard Fischerauer

2009-12-01

Full Text Available One-port surface acoustic wave (SAW devices with defined reflector patterns give characteristic signal patterns in the time domain making them identifiable and leading to so-called RFID-Tags. Each sensor responds with a burst of signals, their timed positions giving the identification code, while the amplitudes can be related to the analyte concentration. This paper presents the first combination of such a transducer with chemically sensitive layer materials. These include crosslinked polyvinyl alcohol for determining relative humidity and tert-butylcalix[4]arene for detecting solvent vapors coated on the free space between the reflectors. In going from the time domain to the frequency domain by Fourier transformation, changes in frequency and phase lead to sensor responses. Hence, it is possible to measure the concentration of tetrachloroethene in air down to 50 ppm, as well as 1% changes in relative humidity.

ISS Asset Tracking Using SAW RFID Technology

Science.gov (United States)

Schellhase, Amy; Powers, Annie

2004-01-01

A team at the NASA Johnson Space Center (JSC) is undergoing final preparations to test Surface Acoustic Wave (SAW) Radio Frequency Identification (RFID) technology to track assets aboard the International Space Station (ISS). Currently, almost 10,000 U.S. items onboard the ISS are tracked within a database maintained by both the JSC ground teams and crew onboard the ISS. This barcode-based inventory management system has successfully tracked the location of 97% of the items onboard, but its accuracy is dependant on the crew to report hardware movements, taking valuable time away from science and other activities. With the addition of future modules, the volume of inventory to be tracked is expected to increase significantly. The first test of RFID technology on ISS, which will be conducted by the Expedition 16 crew later this year, will evaluate the ability of RFID technology to track consumable items. These consumables, which include office supplies and clothing, are regularly supplied to ISS and can be tagged on the ground. Automation will eliminate line-of-sight auditing requirements, directly saving crew time. This first step in automating an inventory tracking system will pave the way for future uses of RFID for inventory tracking in space. Not only are there immediate benefits for ISS applications, it is a crucial step to ensure efficient logistics support for future vehicles and exploration missions where resupplies are not readily available. Following a successful initial test, the team plans to execute additional tests for new technology, expanded operations concepts, and increased automation.

Proteomic and biochemical analyses of short-tailed pit viper (Gloydius brevicaudus) venom: age-related variation and composition-activity correlation.

Science.gov (United States)

Gao, Jian-Fang; Wang, Jin; He, Ying; Qu, Yan-Fu; Lin, Long-Hui; Ma, Xiao-Mei; Ji, Xiang

2014-06-13

We conducted an in-depth analysis of the proteomic and biochemical profiles of the venom of neonate and adult short-tailed pit vipers (Gloydius brevicaudus). Identified proteins were assigned to a few main toxin families. Disintegrin, phospholipase A2 (PLA2), serine proteinase, cysteine-rich secretory protein, C-type lectin-like protein, l-amino acid oxidase and snake venom metalloproteinase (SVMP) were detected in both venoms, while 5'-nucleotidase was detected only in the adult venom. SVMP was the predominant protein family in both venoms (neonate: 65.7%; adult: 64.4%), followed by PLA2 (neonate: 13.4%; adult: 25.0%). Antivenomic analysis revealed that commercial G. brevicaudus antivenom almost neutralized the chromatographic peaks with medium and high molecular masses in both venoms, but did not completely recognize peaks with low molecular mass. Toxicological and enzymatic activities show remarkable age-related variation in G. brevicaudus venom, probably resulting from variation in venom composition. Our data demonstrate age-related variation across venomics, antivenomics and biochemical profiles of G. brevicaudus venom, and have implications for the management of G. brevicaudus bites, including improving antivenom preparation by combining both venoms. This study investigates the composition and biochemical activity of neonate and adult Gloydius brevicaudus venoms. We found remarkable age-related variation in venom biological activity, likely the result of variation in venom composition. Antivenomics analysis was used to explore difference in neonate and adult G. brevicaudus venoms. Our findings have implications for the diagnosis and clinical management of G. brevicaudus bites, and the design of venom mixtures that will increase the efficacy of commercial antivenom. This article is part of a Special Issue entitled: Proteomics of non-model organisms. Copyright © 2014 Elsevier B.V. All rights reserved.

Hydrothermal growth of titania nanowires for SAW device sensing area

Directory of Open Access Journals (Sweden)

Zakaria Mohd Rosydi

2017-01-01

Full Text Available Synthesis of titania or titanium dioxide (TiO2 is attracted to energy and environmental applications. Here, the growth of nanostructure TiO2 nanowires on Si (100 substrates by using the two-step method. Different seed layers of TiO2 were deposited by spin coating and annealing, followed by the growth of TiO2 nanowires by using the hydrothermal method. The sol-gel technique was used in preparing the TiO2 solution for the thin film deposition purpose. Acetic acid, hydrochloric acid and tris (2-aminoethyl amine were used as a stabilizer to synthesize three different TiO2 seed layers. The aim of this study was to understand the role of polycrystalline size on thin film towards the diameter of nanowires grown as a sensing area in Surface Acoustic Wave (SAW Biosensor. The morphology and structure of the thin film and TiO2 nanowires were characterized using X-Ray diffraction (XRD, scanning electron microscope (SEM, field emission scanning electron microscope (FESEM and atomic force microscopy (AFM.

Coordination of Rad1-Rad10 interactions with Msh2-Msh3, Saw1 and RPA is essential for functional 3' non-homologous tail removal.

Science.gov (United States)

Eichmiller, Robin; Medina-Rivera, Melisa; DeSanto, Rachel; Minca, Eugen; Kim, Christopher; Holland, Cory; Seol, Ja-Hwan; Schmit, Megan; Oramus, Diane; Smith, Jessica; Gallardo, Ignacio F; Finkelstein, Ilya J; Lee, Sang Eun; Surtees, Jennifer A

2018-04-06

Double strand DNA break repair (DSBR) comprises multiple pathways. A subset of DSBR pathways, including single strand annealing, involve intermediates with 3' non-homologous tails that must be removed to complete repair. In Saccharomyces cerevisiae, Rad1-Rad10 is the structure-specific endonuclease that cleaves the tails in 3' non-homologous tail removal (3' NHTR). Rad1-Rad10 is also an essential component of the nucleotide excision repair (NER) pathway. In both cases, Rad1-Rad10 requires protein partners for recruitment to the relevant DNA intermediate. Msh2-Msh3 and Saw1 recruit Rad1-Rad10 in 3' NHTR; Rad14 recruits Rad1-Rad10 in NER. We created two rad1 separation-of-function alleles, rad1R203A,K205A and rad1R218A; both are defective in 3' NHTR but functional in NER. In vitro, rad1R203A,K205A was impaired at multiple steps in 3' NHTR. The rad1R218A in vivo phenotype resembles that of msh2- or msh3-deleted cells; recruitment of rad1R218A-Rad10 to recombination intermediates is defective. Interactions among rad1R218A-Rad10 and Msh2-Msh3 and Saw1 are altered and rad1R218A-Rad10 interactions with RPA are compromised. We propose a model in which Rad1-Rad10 is recruited and positioned at the recombination intermediate through interactions, between Saw1 and DNA, Rad1-Rad10 and Msh2-Msh3, Saw1 and Msh2-Msh3 and Rad1-Rad10 and RPA. When any of these interactions is altered, 3' NHTR is impaired.

Immunomodulatory Effect of Red Onion (Allium cepa Linn) Scale Extract on Experimentally Induced Atypical Prostatic Hyperplasia in Wistar Rats

Science.gov (United States)

Elberry, Ahmed A.; Al-Maghrabi, Jaudah; Abdel Sattar, Essam; Ghareib, Salah A.; Mosli, Hisham A.; Gabr, Salah A.

2014-01-01

Red onion scales (ROS) contain large amounts of flavonoids that are responsible for the reported antioxidant activity, immune enhancement, and anticancer property. Atypical prostatic hyperplasia (APH) was induced in adult castrated Wistar rats by both s.c. injection of testosterone (0.5 mg/rat/day) and by smearing citral on shaved skin once every 3 days for 30 days. Saw palmetto (100 mg/kg) as a positive control and ROS suspension at doses of 75, 150, and 300 mg/kg/day were given orally every day for 30 days. All medications were started 7 days after castration and along with testosterone and citral. The HPLC profile of ROS methanolic extract displayed two major peaks identified as quercetin and quercetin-4′-β-O-D-glucoside. Histopathological examination of APH-induced prostatic rats revealed evidence of hyperplasia and inflammation with cellular proliferation and reduced apoptosis Immunohistochemistry showed increased tissue expressions of IL-6, IL-8, TNF-α, IGF-1, and clusterin, while TGF-β1 was decreased, which correlates with the presence of inflammation. Both saw palmetto and RO scale treatment have ameliorated these changes. These ameliorative effects were more evident in RO scale groups and were dose dependent. In conclusion, methanolic extract of ROS showed a protective effect against APH induced rats that may be attributed to potential anti-inflammatory and immunomodulatory effects. PMID:24829522

Immunomodulatory Effect of Red Onion (Allium cepa Linn Scale Extract on Experimentally Induced Atypical Prostatic Hyperplasia in Wistar Rats

Directory of Open Access Journals (Sweden)

Ahmed A. Elberry

2014-01-01

Full Text Available Red onion scales (ROS contain large amounts of flavonoids that are responsible for the reported antioxidant activity, immune enhancement, and anticancer property. Atypical prostatic hyperplasia (APH was induced in adult castrated Wistar rats by both s.c. injection of testosterone (0.5 mg/rat/day and by smearing citral on shaved skin once every 3 days for 30 days. Saw palmetto (100 mg/kg as a positive control and ROS suspension at doses of 75, 150, and 300 mg/kg/day were given orally every day for 30 days. All medications were started 7 days after castration and along with testosterone and citral. The HPLC profile of ROS methanolic extract displayed two major peaks identified as quercetin and quercetin-4′-β-O-D-glucoside. Histopathological examination of APH-induced prostatic rats revealed evidence of hyperplasia and inflammation with cellular proliferation and reduced apoptosis Immunohistochemistry showed increased tissue expressions of IL-6, IL-8, TNF-α, IGF-1, and clusterin, while TGF-β1 was decreased, which correlates with the presence of inflammation. Both saw palmetto and RO scale treatment have ameliorated these changes. These ameliorative effects were more evident in RO scale groups and were dose dependent. In conclusion, methanolic extract of ROS showed a protective effect against APH induced rats that may be attributed to potential anti-inflammatory and immunomodulatory effects.

Pemetaan Kinerja Relatif Kepemimpian Kepala Daerah terhadap Sifat Kepemimpinan Rasulullah SAW

Directory of Open Access Journals (Sweden)

Rakhmat Ceha

2012-12-01

Full Text Available This article proposes a model of performance measurement (mapping is based on the four leadership qualities of Prophet Muhammad SAW, they are shiddig, talbligh, amanah and fathanah. The case study used is the implementation of the leadership of the three head region Municipality (kabupaten of West Java province. Assessment process begins with identifying the variables or criteria along with unit size of each trait Prophet. Furthermore, the survey was conducted in the target study, the city of A, B, and C. For mapping, use the concept of calculation developed by a team of Technology Atlas Project-Unitet Nation and eventually can be calculated Leadership Index (IK for each of the leadership in their respective regions. IK illustrates the relative levels of leadership according to the views of the community, whether it is in compliance with the nature of leadership that ha according to the views of the community s been exemplified by the Rasulullah.

Temperature coefficient of elastic constants of SiO{sub 2} over-layer on LiNbO{sub 3} for a temperature stable SAW device

Energy Technology Data Exchange (ETDEWEB)

Tomar, Monika; Gupta, Vinay; Sreenivas, K [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India)

2003-08-07

The influence of sputtered SiO{sub 2} over-layer on the SAW propagation characteristics of a 128 deg. rotated Y-cut X-propagating lithium niobate SAW filter has been studied. Experimentally measured SAW phase velocity and temperature coefficient of delay (TCD), with varying SiO{sub 2} over-layer thickness, show a significant deviation from the theoretically calculated values using the bulk material parameters of SiO{sub 2}. The observed deviation is attributed to the differences in the material parameters (density, elastic and dielectric constants and their temperature coefficient) of the deposited SiO{sub 2} over-layer. The density and the dielectric constant of the deposited SiO{sub 2} layer were determined separately, and the elastic constants and their temperature coefficients were estimated by fitting the experimental velocity and TCD data, respectively. The deviation in the dielectric constant and the density in comparison to the bulk was insignificant, and the estimated values of the elastic constants (C{sub 11} = 0.75x10{sup 11} N m{sup -2} and C{sub 44} 0.225x10{sup 11} N m{sup -2}) were found to be lower, and the respective temperature coefficients (5.0x10{sup -4} deg C{sup -1} and 2.0x10{sup -4} deg C{sup -1}) were high in comparison to the bulk material parameters.

Experimental scaling of fluctuations and confinement with Lundquist number in the RFP

International Nuclear Information System (INIS)

Stoneking, M.R.; Chapman, J.T.; Prager, S.C.; Sarff, J.S.

1997-09-01

The scaling of the magnetic and velocity fluctuations with Lundquist number (S) is examined experimentally over a range of values from 7 x 10 4 to 10 6 in a reversed field pinch (RFP) plasma. Magnetic fluctuations do not scale uniquely with the Lundquist number. At high (relative) density, fluctuations scale as b∝S -0.18 , and fluctuations are almost independent of S at low relative density, b∝S -0.07 ; however both exponents fall in the range of theoretical and numerical predictions. At high relative density, the scaling of the energy confinement time follows expectations for transport in a stochastic magnetic field. A confinement scaling law (nτ E ∝β 4/5 T -7/10 A -3/5 I φ 2 ) is derived assuming the persistent dominance of stochastic magnetic diffusion in the RFP and on the measured scaling of magnetic fluctuations. The peak velocity fluctuations during a sawtooth cycle scale marginally stronger than magnetic fluctuations but weaker than a simple Ohm's law prediction. The sawtooth period is determined by a resistive-Alfvenic hybrid time (T saw ∝√(τ R τ Alf )) rather than a purely resistive time

Minimal see-saw model predicting best fit lepton mixing angles

International Nuclear Information System (INIS)

King, Stephen F.

2013-01-01

We discuss a minimal predictive see-saw model in which the right-handed neutrino mainly responsible for the atmospheric neutrino mass has couplings to (ν e ,ν μ ,ν τ ) proportional to (0,1,1) and the right-handed neutrino mainly responsible for the solar neutrino mass has couplings to (ν e ,ν μ ,ν τ ) proportional to (1,4,2), with a relative phase η=−2π/5. We show how these patterns of couplings could arise from an A 4 family symmetry model of leptons, together with Z 3 and Z 5 symmetries which fix η=−2π/5 up to a discrete phase choice. The PMNS matrix is then completely determined by one remaining parameter which is used to fix the neutrino mass ratio m 2 /m 3 . The model predicts the lepton mixing angles θ 12 ≈34 ∘ ,θ 23 ≈41 ∘ ,θ 13 ≈9.5 ∘ , which exactly coincide with the current best fit values for a normal neutrino mass hierarchy, together with the distinctive prediction for the CP violating oscillation phase δ≈106 ∘

Assessment of Temperature Rise and Time of Alveolar Ridge Splitting by Means of Er:YAG Laser, Piezosurgery, and Surgical Saw: An Ex Vivo Study.

Science.gov (United States)

Matys, Jacek; Flieger, Rafał; Dominiak, Marzena

2016-01-01

The most common adverse effect after bone cutting is a thermal damage. The aim of our study was to evaluate the bone temperature rise during an alveolar ridge splitting, rating the time needed to perform this procedure and the time to raise the temperature of a bone by 10°C, as well as to evaluate the bone carbonization occurrence. The research included 60 mandibles ( n = 60) of adult pigs, divided into 4 groups ( n = 15). Two vertical and one horizontal cut have been done in an alveolar ridge using Er:YAG laser with set power of 200 mJ (G1), 400 mJ (G2), piezosurgery unit (G3), and a saw (G4). The temperature was measured by K-type thermocouple. The highest temperature gradient was noted for piezosurgery on the buccal and lingual side of mandible. The temperature rises on the bone surface along with the increase of laser power. The lower time needed to perform ridge splitting was measured for a saw, piezosurgery, and Er:YAG laser with power of 400 mJ and 200 mJ, respectively. The temperature rise measured on the bone over 10°C and bone carbonization occurrence was not reported in all study groups. Piezosurgery, Er:YAG laser (200 mJ and 400 mJ), and surgical saw are useful and safe tools in ridge splitting surgery.

Assessment of Temperature Rise and Time of Alveolar Ridge Splitting by Means of Er:YAG Laser, Piezosurgery, and Surgical Saw: An Ex Vivo Study

Directory of Open Access Journals (Sweden)

Jacek Matys

2016-01-01

Full Text Available The most common adverse effect after bone cutting is a thermal damage. The aim of our study was to evaluate the bone temperature rise during an alveolar ridge splitting, rating the time needed to perform this procedure and the time to raise the temperature of a bone by 10°C, as well as to evaluate the bone carbonization occurrence. The research included 60 mandibles (n=60 of adult pigs, divided into 4 groups (n=15. Two vertical and one horizontal cut have been done in an alveolar ridge using Er:YAG laser with set power of 200 mJ (G1, 400 mJ (G2, piezosurgery unit (G3, and a saw (G4. The temperature was measured by K-type thermocouple. The highest temperature gradient was noted for piezosurgery on the buccal and lingual side of mandible. The temperature rises on the bone surface along with the increase of laser power. The lower time needed to perform ridge splitting was measured for a saw, piezosurgery, and Er:YAG laser with power of 400 mJ and 200 mJ, respectively. The temperature rise measured on the bone over 10°C and bone carbonization occurrence was not reported in all study groups. Piezosurgery, Er:YAG laser (200 mJ and 400 mJ, and surgical saw are useful and safe tools in ridge splitting surgery.

Acousto-optical and SAW propagation characteristics of temperature stable multilayered structures based on LiNbO{sub 3} and diamond

Energy Technology Data Exchange (ETDEWEB)

Shandilya, Swati; Sreenivas, K; Gupta, Vinay [Department of Physics and Astrophysics, University of Delhi, Delhi-110007 (India)

2008-01-21

Theoretical studies on the surface acoustic wave (SAW) properties of c-axis oriented LiNbO{sub 3}/IDT/diamond and diamond/IDT/128{sup 0} rotated Y-X cut LiNbO{sub 3} multilayered structures have been considered. Both layered structures exhibit a positive temperature coefficient of delay (TCD) characteristic, and a zero TCD device is obtained after integrating with an over-layer of either tellurium dioxide (TeO{sub 2}) or silicon dioxide (SiO{sub 2}). The presence of a TeO{sub 2} over-layer enhanced the electromechanical coupling coefficients of both multilayered structures, which acts as a better temperature compensation layer than SiO{sub 2}. The temperature stable TeO{sub 2}/LiNbO{sub 3}/IDT/diamond layered structure exhibits good electromechanical coefficient and higher phase velocity for SAW device applications. On the other hand, a high acousto-optical (AO) figure of merit (30-37) x 10{sup -15} s{sup 3} kg{sup -1} has been obtained for the temperature stable SiO{sub 2}/diamond/IDT/LiNbO{sub 3} layered structure indicating a promising device structure for AO applications.

Texture-enhanced Al-Cu electrodes on ultrathin Ti buffer layers for high-power durable 2.6 GHz SAW filters

Science.gov (United States)

Fu, Sulei; Wang, Weibiao; Xiao, Li; Lu, Zengtian; Li, Qi; Song, Cheng; Zeng, Fei; Pan, Feng

2018-04-01

Achieving high resistance to acoustomigration and electromigration in the electrodes used in high-power and high-frequency surface acoustic wave (SAW) filters is important to mobile communications development. In this study, the effects of the Ti buffer layers on the textures and acoustomigration and electromigration resistances of the Al-Cu electrodes were studied comprehensively. The results demonstrate that both power durability and electromigration lifetime are positively correlated with the Al-Cu electrode texture quality. Ultrathin (˜2 nm) Ti can lead to the strongest Al-Cu (111) textured electrodes, with a full width at half maximum of the rocking curve of 2.09°. This represents a remarkable enhancement of the power durability of high-frequency 2.6 GHz SAW filters from 29 dBm to 35 dBm. It also produces lifetime almost 7 times longer than those of electrodes without Ti buffer layers in electromigration tests. X-ray diffraction and transmission electron microscopy analyses revealed that these improved acoustomigration and electromigration resistances can be attributed primarily to the reductions in overall and large-angle grain boundaries in the highly Al-Cu (111) textured electrodes. Furthermore, the growth mechanism of highly Al-Cu texture films is discussed in terms of surface-interface energy balance.

An Analysis of the Joints’ Properties of Fine-Grained Steel Welded by the MAG and SAW Methods

Directory of Open Access Journals (Sweden)

Krawczyk R.

2016-09-01

Full Text Available The article presents an analysis of properties of welded joints of fine-grained steel of P460NH type used more and more often in the modern constructions. A process of examining a technology of welding has been carried out on the thick-walled butt joints of sheet metal by two methods of welding namely MAG – 135 and SAW – 121. The article deals with a topic of optimizing a process of welding thick-walled welded joints of fine-grained steel due to their mechanicalproperties and efficiency.

An analysis of the joints’ properties of thick-grained steel welded by the SAW and ESW methods

Directory of Open Access Journals (Sweden)

Krawczyk R.

2017-03-01

Full Text Available The article presents an analysis of properties of welded joints of thick-grained steel of P460NH type used more and more often in the modern constructions. A process of examining a technology of welding has been carried out on the thick-walled butt joints of sheet metal by two methods of welding namely submerged arc welding (SAW - 121 and electroslag (ESW - 722. The article deals with a topic of optimizing a process of welding thick-walled welded joints of fine-grained steel due to their mechanical properties and efficiency.

Modification of Hack Saw Blade Support 'REMOR 400' from the Length of 650 mm to 450 mm

International Nuclear Information System (INIS)

Sagino, Abdul-Hafid

2005-01-01

REMOR 400 type is the hack saw machine for cutting large work piece. The capacity of cutting is 310 mm diameter. The length of the blade is 650 mm (26 inches). For cutting small work piece (≤ 150 mm), the use of this blade is not efficient because the blade is relatively expensive. To solve this problem, the modification of the blade support is performed so that REMOR 400 machine can use the blade of 450 mm which is cheaper and easier to find in the market. (author)

New chalcanonol glycoside from the seeds of saw palmetto: antiproliferative and antioxidant effects.

Science.gov (United States)

Abdel Bar, Fatma M

2015-01-01

A new chalcanonol glycoside dimer, bis-O-[(I-4') → (II-6')]-α-hydroxyphloretin-2'-O-β-glucoside (1), in addition to six known compounds, namely (-)-epicatechin (2) and (-)-epiafzelechin (3), 4-hydroxybenzoic acid (4), protocatechuic acid (5), methylgallate (6), β-sitosterol (7) and β-sitosterol-3-O-glucoside (8), was isolated from the seeds of saw palmetto. The structures of the isolated compounds were established from the analysis of their MS and 1D and 2D NMR spectroscopic data. The antiproliferative activities of the isolated compounds towards PC3, the human prostate cancer cells were investigated. Amongst the isolated compounds, the new compound and the sterolic derivatives showed antiproliferative effects. Screening of the antioxidant effects of the isolated compounds by 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid radical assay revealed that the isolated phenolics were active free radical scavengers.

Inhibition of secretary PLA₂--VRV-PL-VIIIa of Russell's viper venom by standard aqueous stem bark extract of Mangifera indica L.

Science.gov (United States)

Dhananjaya, B L; Sudarshan, S

2015-03-01

The aqueous extract of Mangifera indica is known to possess anti-snake venom activities. However, its inhibitory potency and mechanism of action on multi-toxic phospholipases A2s, which are the most toxic and lethal component of snake venom is still unknown. Therefore, this study was carried out to evaluate the modulatory effect of standard aqueous bark extract of M. indica on VRV-PL-VIIIa of Indian Russells viper venom. Mangifera indica extract dose dependently inhibited the GIIB sPLA2 (VRV-PL-VIIIa) activity with an IC50 value of 6.8±0.3 μg/ml. M. indica extract effectively inhibited the indirect hemolytic activity up to 96% at ~40 μg/ml concentration. Further, M. indica extract at different concentrations (0-50 μg/ml) inhibited the edema formed in a dose dependent manner. It was found that there was no relieve of inhibitory effect of the extract when examined as a function of increased substrate and calcium concentration. The inhibition was irreversible as evident from binding studies. The in vitro inhibition is well correlated with in situ and in vivo edema inducing activities. As the inhibition is independent of substrate, calcium concentration and was irreversible, it can be concluded that M. indica extracts mode of inhibition could be due to direct interaction of components present in the extract with PLA2 enzyme. In conclusion, the aqueous extract of M. indica effectively inhibits svPLA2 (Snake venom phospholipase A2) enzymatic and its associated toxic activities, which substantiate its anti-snake venom properties. Further in-depth studies are interesting to known on the role and mechanism of the principal inhibitory constituents present in the extract, so as to develop them into potent anti-snake venom and as an anti-inflammatory agent.

A catchment-scale model to predict spatial and temporal burden of E. coli on pasture from grazing livestock.

Science.gov (United States)

Oliver, David M; Bartie, Phil J; Louise Heathwaite, A; Reaney, Sim M; Parnell, Jared A Q; Quilliam, Richard S

2018-03-01

Effective management of diffuse microbial water pollution from agriculture requires a fundamental understanding of how spatial patterns of microbial pollutants, e.g. E. coli, vary over time at the landscape scale. The aim of this study was to apply the Visualising Pathogen &Environmental Risk (ViPER) model, developed to predict E. coli burden on agricultural land, in a spatially distributed manner to two contrasting catchments in order to map and understand changes in E. coli burden contributed to land from grazing livestock. The model was applied to the River Ayr and Lunan Water catchments, with significant correlations observed between area of improved grassland and the maximum total E. coli per 1km 2 grid cell (Ayr: r=0.57; pE. coli burden between seasons in both catchments, with summer and autumn predicted to accrue higher E. coli contributions relative to spring and winter (PE. coli loading to land as driven by stocking density and livestock grazing regimes. Resulting risk maps therefore provide the underpinning evidence to inform spatially-targeted decision-making with respect to managing sources of E. coli in agricultural environments. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Effects of Saw Palmetto Extract on Urodynamic Parameters, Bladder Muscarinic and Purinergic Receptors and Urinary Cytokines in Rats with Cyclophosphamide-Induced Cystitis.

Science.gov (United States)

Nasrin, Sweety; Masuda, Eiji; Kugaya, Haruna; Osano, Ayaka; Ito, Yoshihiko; Yamada, Shizuo

2014-01-01

To clarify the effect of saw palmetto extract (SPE), a phytotherapeutic agent, on urodynamic parameters, bladder muscarinic and purinergic receptors, and urinary cytokines in rats with cystitis induced by cyclophosphamide (CYP). Saw palmetto extract (60 mg/kg per day) was administered orally twice a day for 7 days to rats. The urodynamic parameters in CYP (150 mg/kg i.p.)-treated rats were monitored by a cystometric method under anesthesia. The muscarinic and purinergic receptors in the bladder and submaxillary gland were measured by radioreceptor assays using [N-methyl-(3) H] scopolamine chloride([(3) H]NMS) and αβ-methylene-ATP [2,8-(3) H] tetrasodium salt ([(3) H]αβ-MeATP), respectively. Urinary cytokines (interleukin-1β [IL-1β], IL-6 and L-17) were measured with enzyme linked immunosorbent assay kits. Micturition interval and micturition volume were significantly decreased and the frequency of micturition and basal pressure were significantly increased in the CYP-treated rats compared with sham-operated rats. Orally administered SPE significantly increased the micturition interval and micturition volume and decreased the frequency of micturition and basal pressure. The maximal number of sites (Bmax ) for the specific binding of [(3) H]NMS and [(3) H]αβ-MeATP was significantly decreased in the bladder. The decrease in receptors was attenuated by repeated treatment with SPE. An elevation in urinary cytokine (IL-1β and IL-17) levels were seen, and this increase was effectively suppressed by SPE treatment. Saw palmetto extract attenuates the alteration of urodynamic parameters, pharmacologically relevant receptors, and urinary cytokines in CYP-treated rats. Therefore, SPE may be a potential therapeutic agent for improving the clinical symptoms of cystitis. © 2013 Wiley Publishing Asia Pty Ltd.

Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

Energy Technology Data Exchange (ETDEWEB)

Kildemo, M.; Levinsen, Y. Inntjore; Le Roy, S.; Soenderga ring rd, E. [Department of Physics, Norwegian University of Science and Technology (NTNU), NO-7491 Trondlieim (Norway); Department of Physics, Norwegian University of Science and Technology (NTNU), NO-7491 Trondlieim, Norway and AB CERN, CH- 1211 Geneva 23 (Switzerland); Laboratoire Surface du Verre et Interfaces, UMR 125 Unite Mixte de Recherche CNRS/Saint-Gobain Laboratoire, 39 Quai Lucien Lefranc, F-93303 Aubervilliers Cedex (France)

2009-09-15

High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author's knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

CERN Document Server

Kildemo, M.; Le Roy, S.; Søndergård, E.

2009-01-01

High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author’s knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

Pharmaceutical supply chain risk assessment in Iran using analytic hierarchy process (AHP) and simple additive weighting (SAW) methods.

Science.gov (United States)

Jaberidoost, Mona; Olfat, Laya; Hosseini, Alireza; Kebriaeezadeh, Abbas; Abdollahi, Mohammad; Alaeddini, Mahdi; Dinarvand, Rassoul

2015-01-01

Pharmaceutical supply chain is a significant component of the health system in supplying medicines, particularly in countries where main drugs are provided by local pharmaceutical companies. No previous studies exist assessing risks and disruptions in pharmaceutical companies while assessing the pharmaceutical supply chain. Any risks affecting the pharmaceutical companies could disrupt supply medicines and health system efficiency. The goal of this study was the risk assessment in pharmaceutical industry in Iran considering process's priority, hazard and probability of risks. The study was carried out in 4 phases; risk identification through literature review, risk identification in Iranian pharmaceutical companies through interview with experts, risk analysis through a questionnaire and consultation with experts using group analytic hierarchy process (AHP) method and rating scale (RS) and risk evaluation of simple additive weighting (SAW) method. In total, 86 main risks were identified in the pharmaceutical supply chain with perspective of pharmaceutical companies classified in 11 classes. The majority of risks described in this study were related to the financial and economic category. Also financial management was found to be the most important factor for consideration. Although pharmaceutical industry and supply chain were affected by current political conditions in Iran during the study time, but half of total risks in the pharmaceutical supply chain were found to be internal risks which could be fixed by companies, internally. Likewise, political status and related risks forced companies to focus more on financial and supply management resulting in less attention to quality management.

SAW-Based Phononic Crystal Microfluidic Sensor-Microscale Realization of Velocimetry Approaches for Integrated Analytical Platform Applications.

Science.gov (United States)

Oseev, Aleksandr; Lucklum, Ralf; Zubtsov, Mikhail; Schmidt, Marc-Peter; Mukhin, Nikolay V; Hirsch, Soeren

2017-09-23

The current work demonstrates a novel surface acoustic wave (SAW) based phononic crystal sensor approach that allows the integration of a velocimetry-based sensor concept into single chip integrated solutions, such as Lab-on-a-Chip devices. The introduced sensor platform merges advantages of ultrasonic velocimetry analytic systems and a microacoustic sensor approach. It is based on the analysis of structural resonances in a periodic composite arrangement of microfluidic channels confined within a liquid analyte. Completed theoretical and experimental investigations show the ability to utilize periodic structure localized modes for the detection of volumetric properties of liquids and prove the efficacy of the proposed sensor concept.

Saw palmetto extract induces nuclear heterogeneity in mice.

Science.gov (United States)

Trinachartvanit, Wachareeporn; Francis, Bettina M; Rayburn, A Lane

2009-01-01

Saw palmetto (SW), a phytotherapeutic compound used in the treatment of prostate disease, was examined for potential nuclear effects. SW extract was incorporated into a complete casein-based semisynthetic rodent chow at 0%, 0.1% and 1% SW. SW was fed to mice for 6 weeks, after which the mice received a single i/p injection of either the known genotoxic agent methyl methanesulfonate (MMS) in saline or just saline. Forty-eight hours after injection, blood and bone marrow were collected for flow cytometric analysis. A significant effect of MMS was observed in both male and female mice with respect to: an increase in nuclear heterogeneity in bone marrow cells as measured by the coefficient of variation of the G1 peak in a flow histogram (6.32 versus 4.8 in male mice, 7.0 versus 4.9 in female mice) and an increase in the number of micronucleated blood cells (3.4% versus 0.56% male mice, 3.1% versus 0.6 in female mice) indicating a positive genotoxic response. SW also appears to increase the heterogeneity of bone marrow nuclei in a dose dependent manner (0-5.1%, 0.1-5.5% and 1-5.7% in male mice, 0-5.7%, 0.1-6.0% and 1-6.2% in female mice) without a concomitant increase in blood cell micronuclei. These results indicate that SW is not genotoxic with respect to physical DNA damage and that the changes observed in the bone marrow are due to chromatin conformation modifications in the nuclei of in vivo treated mouse cells. Copyright © 2008 Elsevier B.V. All rights reserved.

Analyzing the Performances of Automotive Companies Using Entropy Based MAUT and SAW Methods

Directory of Open Access Journals (Sweden)

Nuri Ömürbek

2016-06-01

Full Text Available In this study, performances of automotive companies traded on BİST (Istanbul Stock Exchange and also operated in our country have been  compared with the multi-criteria decision making techniques. Data of the most important automotive companies operating in Turkey have been analyzed based on capital, stock certificate, marketing value, sales revenue, number of employees, net profit margin, current ratio, net profit/capital, net profit/sales and net sales/number of employees. Criteria applied on  Performance measurement  was gained  operating reports of companies  in 2014. Entropy method  has been used to determine the weights of the criteria. Those weights have been used MAUT (Multi-Attribute Utility Theory and SAW (Simple Additive Weighting  methods to rank automative companies’ performances The findings highlight that the same companies were in the first three places  in both methods.

A high-linearity CMOS receiver achieving +44dBm IIP3 and +13dBm B1dB for SAW-less LTE radio

NARCIS (Netherlands)

Lien, Yuan-Ching; Klumperink, Eric A.M.; Tenbroek, Bernard; Strange, Jon; Nauta, Bram

2017-01-01

LTE-advanced wireless receivers require high-linearity up-front filtering to prevent corruption of the in-band signals by strong out-of-band (OOB) signals and self-interference from the transmitter. SAW duplexer filters are generally used for this purpose, but supporting the plethora of existing and

Inferior alveolar nerve function after sagittal split osteotomy by reciprocating saw or piezosurgery instrument: prospective double-blinded study.

Science.gov (United States)

Monnazzi, Marcelo Silva; Real Gabrielli, Mario Francisco; Passeri, Luis Augusto; Cabrini Gabrielli, Marisa Aparecida; Spin-Neto, Rubens; Pereira-Filho, Valfrido Antonio

2014-06-01

The aim of this prospective study was to objectively evaluate inferior alveolar nerve (IAN) sensory disturbances in patients who underwent sagittal split ramus osteotomy (SSRO) by comparing 1 side treated with a reciprocating saw with the other side treated with a piezosurgery device. Clinical evaluation of IAN sensory disturbance was undertaken preoperatively and at 1 week, 4 weeks, 2 months, and 6 months postoperatively in 20 patients who underwent SSRO at the Division of Oral and Maxillofacial Surgery, Araraquara Dental School, São Paulo State University. The 20 patients were examined at all periods for IAN functionality by Semmes-Weinstein testing; neither the patients nor the examiner knew which side was treated using piezosurgery or a reciprocating saw. The mean age of the patients was 28.4 years (range, 20 to 48 yr). Before surgery, no patient had impaired function of the IAN in any of the 8 zones in the mental and inferior lip areas. All patients reported feeling the first monofilament at the time of the preoperative test. Seven days postoperatively, all patients reported some kind of altered sensitivity in at least 1 zone evaluated. The results of this study suggest there was no statistically significant difference in the sensitivity of the labiomental area regarding the instrument used to perform the osteotomy. Future studies will focus on enlarging the sample and evaluating the results. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

The risk-benefit profile of commonly used herbal therapies: Ginkgo, St. John's Wort, Ginseng, Echinacea, Saw Palmetto, and Kava.

Science.gov (United States)

Ernst, Edzard

2002-01-01

Because use of herbal remedies is increasing, a risk-benefit profile of commonly used herbs is needed. This article provides a clinically oriented overview of the efficacy and safety of ginkgo, St. John's wort, ginseng, echinacea, saw palmetto, and kava. Wherever possible, assessments are based on systematic reviews of randomized clinical trials. Encouraging data support the efficacy of some of these popular herbal medicinal products, and the potential for doing good seems greater than that for doing harm. The published evidence suggests that ginkgo is of questionable use for memory loss and tinnitus but has some effect on dementia and intermittent claudication. St. John's wort is efficacious for mild to moderate depression, but serious concerns exist about its interactions with several conventional drugs. Well-conducted clinical trials do not support the efficacy of ginseng to treat any condition. Echinacea may be helpful in the treatment or prevention of upper respiratory tract infections, but trial data are not fully convincing. Saw palmetto has been shown in short-term trials to be efficacious in reducing the symptoms of benign prostatic hyperplasia. Kava is an efficacious short-term treatment for anxiety. None of these herbal medicines is free of adverse effects. Because the evidence is incomplete, risk-benefit assessments are not completely reliable, and much knowledge is still lacking.

Effective equine immunization protocol for production of potent poly-specific antisera against Calloselasma rhodostoma, Cryptelytrops albolabris and Daboia siamensis.

Directory of Open Access Journals (Sweden)

Sompong Sapsutthipas

2015-03-01

Full Text Available Snake envenomation has been estimated to affect 1.8 million people annually with about 94,000 deaths mostly in poor tropical countries. Specific antivenoms are the only rational and effective therapy for these cases. Efforts are being made to produce effective, affordable and sufficient antivenoms for these victims. The immunization process, which has rarely been described in detail, is one step that needs to be rigorously studied and improved especially with regard to the production of polyspecific antisera. The polyspecific nature of therapeutic antivenom could obviate the need to identify the culprit snake species. The aim of this study was to produce potent polyspecific antisera against 3 medically important vipers of Thailand and its neighboring countries, namely Cryptelytrops albolabris "White lipped pit viper" (CA, Calleoselasma rhodostoma "Malayan pit viper" (CR, and Daboia siamensis "Russell's viper" (DS. Four horses were immunized with a mixture of the 3 viper venoms using the 'low dose, low volume multi-site' immunization protocol. The antisera showed rapid rise in ELISA titers against the 3 venoms and reached plateau at about the 8th week post-immunization. The in vivo neutralization potency (P of the antisera against CA, CR and DS venoms was 10.40, 2.42 and 0.76 mg/ml, respectively and was much higher than the minimal potency limits set by Queen Soavabha Memorial Institute (QSMI. The corresponding potency values for the QSMI monospecific antisera against CA, CR and DS venoms were 7.28, 3.12 and 1.50 mg/ml, respectively. The polyspecific antisera also effectively neutralized the procoagulant, hemorrhagic, necrotic and nephrotoxic activities of the viper venoms. This effective immunization protocol should be useful in the production of potent polyspecific antisera against snake venoms, and equine antisera against tetanus, diphtheria or rabies.

Isolation and pharmacological characterization of fatty acids from saw palmetto extract.

Science.gov (United States)

Abe, Masayuki; Ito, Yoshihiko; Suzuki, Asahi; Onoue, Satomi; Noguchi, Hiroshi; Yamada, Shizuo

2009-04-01

Saw palmetto extract (SPE) has been widely used for the treatment of lower urinary-tract symptoms secondary to benign prostatic hyperplasia. The mechanisms of pharmacological effects of SPE include the inhibition of 5alpha-reductase, anti-androgenic effects, anti-proliferative effects, and anti-inflammatory effects. Previously, we showed that SPE bound actively to alpha(1)-adrenergic, muscarinic and 1,4-dihydropyridine calcium channel (1,4-DHP) receptors in the prostate and bladder of rats, whereas its active constituents have not been fully clarified. The present investigation is aimed to identify the main active components contained in hexane and diethyl ether extracts of SPE with the use of column chromatography and preparative HPLC. Based on the binding activity with alpha(1)-adrenergic, muscarinic, and 1,4-DHP receptors, both isolated oleic and lauric acids were deduced to be active components. Authentic samples of oleic and lauric acids also exhibited similar binding activities to these receptors as the fatty acids isolated from SPE, consistent with our findings. In addition, oleic and lauric acids inhibited 5alpha-reductase, possibly leading to therapeutic effects against benign prostatic hyperplasia and related lower urinary-tract symptoms.

Talspeak Curve: An Illustration Of A See-Saw Effect In Separations

International Nuclear Information System (INIS)

Zalupski, Peter; Martin, Leigh

2010-01-01

A superbly balanced thermodynamic struggle for metal ion coordination by aqueous aminopolycarboxylate reagent, DTPA, and non-aqueous organophosphorous phase transfer reagent, HDEHP, affords the separation of trivalent actinides from trivalent lanthanides under the umbrella of the Talspeak liquid-liquid distribution process. This thermodynamic relationship has been linked to an analogous 'see-saw' behavior, where the balance is distorted when either of the key complexing players is subject to adverse conditions that interfere with their optimal operation. The thermodynamic balance is tipped in favor of HDEHP whenever increased acidity of the aqueous solution out-competes the metal ion complexation by aqueous complexing agent. Also enhanced steric crowding may switch-off efficient coordination of the metal ion. When HDEHP is depolymerized due to the presence of aliphatic alcohol in the organic phase its phase transferring power is diminished. Such complication paves way for DTPA to establish its dominance on the distribution of trivalent metal ions in the 2-phase system. The illustrated sensitivity of the thermodynamic balance between DTPA and HDEHP in Talspeak-type systems may serve as informative tool when studying less-predictable realms of Talspeak chemistry.

Autumn migration of Northern Saw-whet Owls (Aegolius acadicus) in the Middle Atlantic and Northeastern United States: what observations from 1995 suggest

Science.gov (United States)

David F. Brinker; Katharine E. Duffy; David M. Whalen; Bryan D. Watts; Kevin M. Dodge

1997-01-01

During the autumn of 1995 more than 5,900 migrant Northern Saw-whet Owls were banded in eastern and central North America. Though typical numbers of owls were banded at most Great Lakes stations during 1995, a record number were netted at Hawk Ridge, near Duluth, Minnesota and, when compared with more normal years, a remarkably disproportionate 40 percent of the total...

Notes on SAW Tag Interrogation Techniques

Science.gov (United States)

Barton, Richard J.

2010-01-01

We consider the problem of interrogating a single SAW RFID tag with a known ID and known range in the presence of multiple interfering tags under the following assumptions: (1) The RF propagation environment is well approximated as a simple delay channel with geometric power-decay constant alpha >/= 2. (2) The interfering tag IDs are unknown but well approximated as independent, identically distributed random samples from a probability distribution of tag ID waveforms with known second-order properties, and the tag of interest is drawn independently from the same distribution. (3) The ranges of the interfering tags are unknown but well approximated as independent, identically distributed realizations of a random variable rho with a known probability distribution f(sub rho) , and the tag ranges are independent of the tag ID waveforms. In particular, we model the tag waveforms as random impulse responses from a wide-sense-stationary, uncorrelated-scattering (WSSUS) fading channel with known bandwidth and scattering function. A brief discussion of the properties of such channels and the notation used to describe them in this document is given in the Appendix. Under these assumptions, we derive the expression for the output signal-to-noise ratio (SNR) for an arbitrary combination of transmitted interrogation signal and linear receiver filter. Based on this expression, we derive the optimal interrogator configuration (i.e., transmitted signal/receiver filter combination) in the two extreme noise/interference regimes, i.e., noise-limited and interference-limited, under the additional assumption that the coherence bandwidth of the tags is much smaller than the total tag bandwidth. Finally, we evaluate the performance of both optimal interrogators over a broad range of operating scenarios using both numerical simulation based on the assumed model and Monte Carlo simulation based on a small sample of measured tag waveforms. The performance evaluation results not only

Two-loop renormalization group analysis of supersymmetric SO(10) models with an intermediate scale

International Nuclear Information System (INIS)

Bastero-Gil, M.; Brahmachari, B.

1996-03-01

Two-loop evolutions of the gauge couplings in a class of intermediate scale supersymmetric SO(10) models including the effect of third generation Yukawa couplings are studied. The unification scale, the intermediate scale and the value of the unification gauge coupling in these models are calculated and the gauge boson mediated proton decay rates are estimated. In some cases the predicted proton lifetime turns out to be in the border-line of experimental limit. The predictions of the top quark mass, the mass ratio m b (m b )/m τ (m τ ) from the two-loop evolution of Yukawa couplings and the mass of the left handed neutrino via see-saw mechanism are summarized. The lower bounds on the ratio of the VEVs of the two low energy doublets (tan β) from the requirement of the perturbative unitarity of the top quark Yukawa coupling up to the grand unification scale are also presented. All the predictions have been compared with those of the one-step unified theory. (author). 33 refs, 5 figs, 1 tab

A Fusion Approach to Feature Extraction by Wavelet Decomposition and Principal Component Analysis in Transient Signal Processing of SAW Odor Sensor Array

Directory of Open Access Journals (Sweden)

Prashant SINGH

2011-03-01

Full Text Available This paper presents theoretical analysis of a new approach for development of surface acoustic wave (SAW sensor array based odor recognition system. The construction of sensor array employs a single polymer interface for selective sorption of odorant chemicals in vapor phase. The individual sensors are however coated with different thicknesses. The idea of sensor coating thickness variation is for terminating solvation and diffusion kinetics of vapors into polymer up to different stages of equilibration on different sensors. This is expected to generate diversity in information content of the sensors transient. The analysis is based on wavelet decomposition of transient signals. The single sensor transients have been used earlier for generating odor identity signatures based on wavelet approximation coefficients. In the present work, however, we exploit variability in diffusion kinetics due to polymer thicknesses for making odor signatures. This is done by fusion of the wavelet coefficients from different sensors in the array, and then applying the principal component analysis. We find that the present approach substantially enhances the vapor class separability in feature space. The validation is done by generating synthetic sensor array data based on well-established SAW sensor theory.

Sensitivity of the activated partial thromboplastin time, the dilute Russell's viper venom time, and the kaolin clotting time for the detection of the lupus anticoagulant: a direct comparison using plasma dilutions.

Science.gov (United States)

Martin, B A; Branch, D W; Rodgers, G M

1996-01-01

Increasing dilutions of lupus anticoagulant (LA) plasmas from twelve patients were used to directly compare the sensitivity of four tests for LA. The tests evaluated were the modified Bell and Alton activated partial thromboplastin time (APTT), an APTT using a commercially prepared partial thromboplastin (Platelin LS APTT), a modified dilute Russell's viper venom time (DRVVT), and a modified kaolin clotting time (KCT). LAs were detected in all twelve plasmas by each of three tests and eleven of twelve plasmas in a fourth test when undiluted patient plasma was used. Repeating the tests after diluting the LA plasmas with normal platelet-free plasma (PFP) showed that the KCT was the most sensitive test for LA, detecting eleven of twelve LAs at a dilution of 10% patient plasma and ten of twelve LAs at a dilution of 5% patient plasma. The modified Bell and Alton APTT and the modified DRVVT had similar sensitivities at a patient plasma concentration of 10%, detecting seven of twelve and eight of twelve LAs, respectively. The Platelin LS APTT detected only four of twelve LAs at a patient plasma concentration of 10%. Our results indicate that the modified KCT is a sensitive method for the detection of LAs. The modified Bell and Alton APTT and the DRVVT were less sensitive.

Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-09-19

This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

Clinical safety of a polyvalent F(ab')2 equine antivenom in 223 African snake envenomations : a field trial in Cameroon

OpenAIRE

Chippaux, Jean-Philippe; Lang, J.; Amadi Eddine, S; Fagot, P.; Rage, V.; Peyrieux, J.C.; Le Mener, V.

1998-01-01

A large-scale clinical trial was conducted, according to World Health Organization Good Clinical Practice guidelines, in 7 centres in North Cameroon to determine the safety and efficacy of a polyvalent antivenom composed of purified F(ab')2. This study included 223 patients presenting clinically with an obvious snake bite, predominantly due to #Echis ocellatus$ (viper), the most abundant species in this savannah region. Clinical surveillance was maintained for 5 d in all patients and until th...

Knowledge and prevalence of use of saw palmetto and other herbal products among men with prostate disease in Trinidad and Tobago

OpenAIRE

S. Persaud; J. Leach; A. Ramkissoon; L. Goetz

2017-01-01

Objective: To investigate the knowledge and prevalence of use of saw palmetto and other herbal products among men attending the urology outpatient clinic at San Fernando General Hospital. Subjects and methods: This was a prospective, cross-sectional study carried out between February and May 2015. A structured, interviewer administered questionnaire was used to collect data from randomly selected men with prostate cancer or benign prostatic hyperplasia (BPH) and who were part of our outpat...

The use of ecological niche modeling to infer potential risk areas of snakebite in the Mexican state of Veracruz.

Directory of Open Access Journals (Sweden)

Carlos Yañez-Arenas

Full Text Available Many authors have claimed that snakebite risk is associated with human population density, human activities, and snake behavior. Here we analyzed whether environmental suitability of vipers can be used as an indicator of snakebite risk. We tested several hypotheses to explain snakebite incidence, through the construction of models incorporating both environmental suitability and socioeconomic variables in Veracruz, Mexico.Ecological niche modeling (ENM was used to estimate potential geographic and ecological distributions of nine viper species' in Veracruz. We calculated the distance to the species' niche centroid (DNC; this distance may be associated with a prediction of abundance. We found significant inverse relationships between snakebites and DNCs of common vipers (Crotalus simus and Bothrops asper, explaining respectively 15% and almost 35% of variation in snakebite incidence. Additionally, DNCs for these two vipers, in combination with marginalization of human populations, accounted for 76% of variation in incidence.Our results suggest that niche modeling and niche-centroid distance approaches can be used to mapping distributions of environmental suitability for venomous snakes; combining this ecological information with socioeconomic factors may help with inferring potential risk areas for snakebites, since hospital data are often biased (especially when incidences are low.

The use of ecological niche modeling to infer potential risk areas of snakebite in the Mexican state of Veracruz.

Science.gov (United States)

Yañez-Arenas, Carlos; Peterson, A Townsend; Mokondoko, Pierre; Rojas-Soto, Octavio; Martínez-Meyer, Enrique

2014-01-01

Many authors have claimed that snakebite risk is associated with human population density, human activities, and snake behavior. Here we analyzed whether environmental suitability of vipers can be used as an indicator of snakebite risk. We tested several hypotheses to explain snakebite incidence, through the construction of models incorporating both environmental suitability and socioeconomic variables in Veracruz, Mexico. Ecological niche modeling (ENM) was used to estimate potential geographic and ecological distributions of nine viper species' in Veracruz. We calculated the distance to the species' niche centroid (DNC); this distance may be associated with a prediction of abundance. We found significant inverse relationships between snakebites and DNCs of common vipers (Crotalus simus and Bothrops asper), explaining respectively 15% and almost 35% of variation in snakebite incidence. Additionally, DNCs for these two vipers, in combination with marginalization of human populations, accounted for 76% of variation in incidence. Our results suggest that niche modeling and niche-centroid distance approaches can be used to mapping distributions of environmental suitability for venomous snakes; combining this ecological information with socioeconomic factors may help with inferring potential risk areas for snakebites, since hospital data are often biased (especially when incidences are low).

Evaluation of the performances of wastewater treatment services provided by the metropolitan municipalities in Turkey using Entropy integrated SAW, MOORA and TOPSIS

OpenAIRE

Ayyıldız, Ertuğrul; Özçelik, Gökhan

2018-01-01

Reusingof the wastewater has a vital importance because of limited natural waterresources all around the world. Recycled wastewater can be used in many areassuch as agriculture, industry, cleaning etc. Treatment of wastewater is one ofthe important tasks of metropolitan municipalities. The aim of this study is toevaluate the performances of wastewater treatment services provided by themetropolitan municipalities in Turkey using Entropy integrated SAW, MOORA andTOPSIS methods. In the scope of ...

Fluid flow in 0.5-m scale blocks of Topopah Spring tuff

International Nuclear Information System (INIS)

Blair, S. C.; Carlson, S. R.; Constantino, M. S.

1999-01-01

A laboratory experiment was conducted on a 0.5-m scale block of Topopah Spring tuff, to measure fluid flow and mechanical deformation properties under conditions that approximate the near-field environment of a potential nuclear waste repository, and to provide an intermediate-scale test case for numerical model validation. The test specimen is a 0.25 x 0.25 x 0.50 m rectangular prism bisected by an artificial (saw-cut) fracture orthogonal to the tuff fabric. Water was supplied by a point source at the center of the fracture under various pressures of up to 0.04 MPa. Both fluid flow and mechanical properties were found to be anisotropic and strongly correlated with the ash flow fabric. Fluid mass-balance measurements revealed that only minor imbibition of water occurred through the fracture surfaces and that flow rates were independent of normal stress to 14.0 MPa and temperature to 140 C. Flow through the fracture occurred largely through uncorrelated porosity that intersected the fracture plane

Why PeV scale left-right symmetry is a good thing

Science.gov (United States)

Yajnik, Urjit A.

2017-10-01

Left-right symmetric gauge theory presents a minimal paradigm to accommodate massive neutrinos with all the known conserved symmetries duly gauged. The work presented here is based on the argument that the see-saw mechanism does not force the new right-handed symmetry scale to be very high, and as such some of the species from the spectrum of the new gauge and Higgs bosons can have masses within a few orders of magnitude of the TeV scale. The scale of the left-right parity breaking in turn can be sequestered from the Planck scale by supersymmetry. We have studied several formulations of such just beyond Standard Model (JBSM) theories for their consistency with cosmology. Specifically, the need to eliminate phenomenologically undesirable domain walls gives many useful clues. The possibility that the exact left-right symmetry breaks in conjunction with supersymmetry has been explored in the context of gauge mediation, placing restrictions on the available parameter space. Finally, we have also studied a left-right symmetric model in the context of metastable supersymmetric vacua and obtained constraints on the mass scale of right-handed symmetry. In all the cases studied, the mass scale of the right-handed neutrino M_R remains bounded from above, and in some of the cases the scale 10^9 GeV favourable for supersymmetric thermal leptogenesis is disallowed. On the other hand, PeV scale remains a viable option, and the results warrant a more detailed study of such models for their observability in collider and astroparticle experiments.

Randomized trial of a combination of natural products (cernitin, saw palmetto, B-sitosterol, vitamin E) on symptoms of benign prostatic hyperplasia (BPH).

Science.gov (United States)

Preuss, H G; Marcusen, C; Regan, J; Klimberg, I W; Welebir, T A; Jones, W A

2001-01-01

Because benign prostatic hyperplasia (BPH) is relatively common, it is important to discover safe and effective means to treat this often debilitating perturbation. Accordingly, we examined the effectiveness of a combination of natural products (cernitin, saw palmetto, B-sitosterol, vitamin E) in treating symptoms of BPH. We undertook a randomized, placebo-controlled, double-blind study. Patients were enrolled from 3 urological practices in the USA. 144 subjects were randomized for study. 17 subjects eventually withdrew, leaving 70 patients in the test group and 57 in the placebo group to complete the study. Inclusion criteria consisted of a diagnosis of BPH, no evidence of cancer, and a maximal urinary flow rate between 5 and 15 ml/second. Patients received either placebo or the combined natural products for 3 months. Evaluations were performed via the American Urological Association (AUA) Symptom Index score, urinary flow rate, PSA measurement, and residual bladder volume. Nocturia showed a markedly significant decrease in severity in patients receiving the combined natural products compared to those taking placebo (p saw palmetto, B-sitosterol, vitamin E) compared to placebo can significantly lessen nocturia and frequency and diminish overall symptomatology of BPH as indicated by an improvement in the total AUA Symptom Index score. The combination of natural products caused no significant adverse side effects.

Public sector pay gap in Serbia during large-scale privatisation, by educational qualification

Directory of Open Access Journals (Sweden)

Laušev Jelena

2012-01-01

Full Text Available The paper explores the effect of large-scale privatization of public sector activities on public-private sector pay differential, for groups of workers according to educational qualification on average and across the pay distribution in Serbia, from 2004 until 2008. The paper finds that both unskilled and skilled men and women in the public sector saw significant improvements in their financial position relative to their private sector counterparts with the progress of the economic transition. The results showed that the size of the public sector pay premium declines both with higher educational level and higher percentile of earnings distribution. This indicates, between and within groups, the inequality-reducing feature of the public sector pay determination.

A model for a unification of scales. From MPlanck TO mν

International Nuclear Information System (INIS)

Pati, J.C.

1989-01-01

It is proposed that the hierarchical scales - from M Planck to m ν - have a common origin. Using M Planck and the coupling constant associated with a preonic metacolor gauge force as the only input parameters, it is shown how large ratios such as (M Pl /M I ), (M Pl /δm s ), (M Pl /m W ), (M Pl /m t ) and even (M Pl /m ν )> or approx.10 27 can arise naturally. Here M I denotes an intermediate scale ≅ 10 11 GeV, which is identified with the scale parameter of the metacolor force, while δm s denotes SUSY-breaking mass splittings ≅ 1 TeV. Local supersymmetry together with an inhibition in the breaking of global SUSY (index theorem) as well as compositeness of quarks, leptons and Higgs play crucial roles in this approach. Two key features of the model are the natural origins of composite vector-like families with masses of order of a few hundred GeV to 1 TeV and the consequent see-saw mechanism for the generations of quark-lepton masses and CP violation. (orig.)

Preliminary Full-Scale Tests of the Center for Automated Processing of Hardwoods' Auto-Image

Science.gov (United States)

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Adopting small-scale production of electricity

Energy Technology Data Exchange (ETDEWEB)

Tengvard, Maria; Palm, Jenny (Linkoeping Univ., Dept. of Technology and Social Change, Linkoeping (Sweden)). e-mail: maria.tengvard@liu.se

2009-07-01

In Sweden in 2008, a 'new' concept for small-scale electricity production attracted massive media attention. This was mainly due to the efforts of Swedish company Egen El, which is marketing small-scale photovoltaics (PVs) and wind turbines to households, both homeowners and tenants. Their main selling point is simplicity: their products are so easy to install that everyone can do it. Autumn 2008 also saw IKEA announce that within three years it would market solar panels. How, then, do households perceive these products? Why would households choose to buy them? How do households think about producing their own electricity? Analysis of material based on in-depth interviews with members of 20 households reveals that environmental concerns supply the main motive for adopting PVs or micro wind power generation. In some cases, the adopting households have an extensively ecological lifestyle and such adoption represents a way to take action in the energy area. For some, this investment is symbolic: a way of displaying environmental consciousness or setting an example to others. For still others, the adoption is a protest against 'the system' with its large dominant actors or is a way to become self-sufficient. These microgeneration installations are rejected mainly on economic grounds; other motives are respect for neighbours and difficulties finding a place to install a wind turbine.

Walking on fractals: diffusion and self-avoiding walks on percolation clusters

International Nuclear Information System (INIS)

Blavatska, V; Janke, W

2009-01-01

We consider random walks (RWs) and self-avoiding walks (SAWs) on disordered lattices directly at the percolation threshold. Applying numerical simulations, we study the scaling behavior of the models on the incipient percolation cluster in space dimensions d = 2, 3, 4. Our analysis yields estimates of universal exponents, governing the scaling laws for configurational properties of RWs and SAWs

Gamma irradiation effects on larval and pupal stages on the saw toothed grain beetle oryzaephilus

International Nuclear Information System (INIS)

Younes, M.W.; Ahmed, M.Y.Y.

1978-01-01

Effects of gamma irradiation from Co 60 on larval and pupal stages of the saw-toothed grain beetle. Oryzaephilus surinamensis L. were determined. Larval and pupal sensitivity depended on age at treatment, the older the larvae or pupae, the less susceptible. No adults emerged in the 10- to 12-day larvae and 4-day old pupae when irradiated at 10 and 100 Krad. respectively. Irradiation of larvae and pupae especially at high doses, resulted in reduced percent adult emergence in incomplete emergence, and in structural deformities. The percentage sterility for both sexes at each dosage used were determined. Males and females irradiated asl-d and 4-d-old pupae, then mated with normal unmated adults of the opposite sex laid infertile eggs when irradiated at 12 Krad. Adult mortality from irradiated pupae (1- or 4-d-old) was increased with the increase of the dose

Higher-Dimensional Origin of Heavy Sneutrino Domination and Low-Scale Leptogenesis

CERN Document Server

Hebecker, A; Yanagida, T

2003-01-01

If the expectation value of the right-handed (rhd) sneutrino comes to dominate the universe, its decay naturally leads to successful leptogenesis, as well as significant dilution of dangerous inflationary relics, such as the gravitino. The resulting baryon asymmetry is independent of other cosmological initial conditions. This attractive variant of leptogenesis requires at least one of the rhd neutrinos to have small Yukawa coupling and to have mass ~ 10^6 GeV, much smaller than the grand unified (GUT) scale. We show that these features naturally arise in the context of independently motivated and successful 5d orbifold GUTs with inverse-GUT-scale-sized extra dimensions. Rhd neutrinos are realized as bulk fields N_i with 5d bulk masses, while Yukawa couplings and lepton-number-violating masses for the N_i are localized at the SM boundary. The exponential suppression of the would-be N_i zero-modes leads to the desired small 4d Yukawa couplings and small masses for the rhd neutrino states. The see-saw predictio...

Empleo de cromitas refractarias para la obtención de fundentes aglomerados utilizados en la soldadura automática por arco sumergido (SAW

Directory of Open Access Journals (Sweden)

Perdomo-González, L.

2003-08-01

Full Text Available In the present work high carbon ferrochrome (load ferrochrome and slags are obtained, starting frora the métallurgie reductive processing of refractory chromites. The obtaining of alloys and slags is studied using an experiment design based in the relationships among components. The chemical compositions of alloys and slags guarantee their application for the conformation of alloys loads and matrix fluxes amassed for the superficial filling by means of submerged arc welding (SAW. The melting-reduction process is carried out in an electric arc furnace.

En el presente trabajo se obtienen ferrocromo de alto carbono (ferrocromo de carga y escorias a partir del proceso de reducción de cromitas refractarias. Mediante la utilización de un diseño de experimento de relaciones entre componentes, se estudia la obtención de aleaciones y escorias. La composición química de ambas garantiza su aplicación para la conformación de cargas aleantes y matrices de fundentes aglomerados, para el relleno superficial mediante soldadura automática por arco sumergido (SAW. El proceso de fusión-reducción se realiza en un horno eléctrico de arco.

Evaluation of a gas chromatograph with a novel surface acoustic wave detector (SAW GC) for screening of volatile organic compounds in Hanford waste tank samples

International Nuclear Information System (INIS)

Lockrem, L.L.

1998-01-01

A novel instrument, a gas chromatograph with a Surface Acoustic Wave Detector (SAW GC), was evaluated for the screening of organic compounds in Hanford tank headspace vapors. Calibration data were developed for the most common organic compounds, and the accuracy and precision were measured with a certified standard. The instrument was tested with headspace samples collected from seven Hanford waste tanks

Calibrated acoustic emission system records M -3.5 to M -8 events generated on a saw-cut granite sample

Science.gov (United States)

McLaskey, Gregory C.; Lockner, David A.

2016-01-01

Acoustic emission (AE) analyses have been used for decades for rock mechanics testing, but because AE systems are not typically calibrated, the absolute sizes of dynamic microcrack growth and other physical processes responsible for the generation of AEs are poorly constrained. We describe a calibration technique for the AE recording system as a whole (transducers + amplifiers + digitizers + sample + loading frame) that uses the impact of a 4.76-mm free-falling steel ball bearing as a reference source. We demonstrate the technique on a 76-mm diameter cylinder of westerly granite loaded in a triaxial deformation apparatus at 40 MPa confining pressure. The ball bearing is dropped inside a cavity within the sample while inside the pressure vessel. We compare this reference source to conventional AEs generated during loading of a saw-cut fault in a second granite sample. All located AEs occur on the saw-cut surface and have moment magnitudes ranging from M −5.7 down to at least M −8. Dynamic events rupturing the entire simulated fault surface (stick–slip events) have measurable stress drop and macroscopic slip and radiate seismic waves similar to those from a M −3.5 earthquake. The largest AE events that do not rupture the entire fault are M −5.7. For these events, we also estimate the corner frequency (200–300 kHz), and we assume the Brune model to estimate source dimensions of 4–6 mm. These AE sources are larger than the 0.2 mm grain size and smaller than the 76 × 152 mm fault surface.

Viper NHEXS Program: A Viper Pilot Neck Health & Conditioning Guide

Science.gov (United States)

2012-11-01

distribution is unlimited. Case Number: 88ABW-2013-0089, 10 Jan 2013 by using proper exercise form, since this is a free -weight training device. Without...fairly low. For example, unlike squats , which require recruitment of very large skeletal muscle groups, neck muscle 6 Distribution A: Approved

Pharmacological effects of saw palmetto extract in the lower urinary tract.

Science.gov (United States)

Suzuki, Mayumi; Ito, Yoshihiko; Fujino, Tomomi; Abe, Masayuki; Umegaki, Keizo; Onoue, Satomi; Noguchi, Hiroshi; Yamada, Shizuo

2009-03-01

Saw palmetto extract (SPE), an extract from the ripe berries of the American dwarf palm, has been widely used as a therapeutic remedy for urinary dysfunction due to benign prostatic hyperplasia (BPH) in Europe. Numerous mechanisms of action have been proposed for SPE, including the inhibition of 5alpha-reductase. Today, alpha(1)-adrenoceptor antagonists and muscarinic cholinoceptor antagonists are commonly used in the treatment of men with voiding symptoms secondary to BPH. The improvement of voiding symptoms in patients taking SPE may arise from its binding to pharmacologically relevant receptors in the lower urinary tract, such as alpha(1)-adrenoceptors, muscarinic cholinoceptors, 1,4-dihyropyridine receptors and vanilloid receptors. Furthermore, oral administration of SPE has been shown to attenuate the up-regulation of alpha(1)-adrenoceptors in the rat prostate induced by testosterone. Thus, SPE at clinically relevant doses may exert a direct effect on the pharmacological receptors in the lower urinary tract, thereby improving urinary dysfunction in patients with BPH and an overactive bladder. SPE does not have interactions with co-administered drugs or serious adverse events in blood biochemical parameters, suggestive of its relative safety, even with long-term intake. Clinical trials (placebo-controlled and active-controlled trials) of SPE conducted in men with BPH were also reviewed. This review should contribute to the understanding of the pharmacological effects of SPE in the treatment of patients with BPH and associated lower urinary tract symptoms (LUTS).

Notas sobre predação em uma taxocenose de anfíbios anuros no sudeste do Brasil Predation notes in an anuran amphibians assemblage from southeastern Brazil

Directory of Open Access Journals (Sweden)

José P. Pombal Jr

2007-01-01

Full Text Available Anfíbios anuros são predados por todos os grupos de vertebrados e muitos invertebrados. Todavia os estudos sobre predação em anfíbios anuros ainda são esparsos e anedóticos. Neste estudo são fornecidas informações sobre predação de anuros de uma assembléia no sudeste do Brasil. Invertebrados (aranhas e barata d’agua, a rã Leptodactylus cf. ocellatus e cinco espécies serpentes (quatro Colubridae e um Viperidae predaram espécies ou indivíduos de pequeno porte.Anuran amphibians are preyer by all vertebrate groups and several invertebrates. However, predation studies on amphibians are still occasional and anecdotic. Herein, informations on predation of an anuran assemblage of southeastern Brazil are provided. Invertebrates (spiders and water bugs, the frog Leptodactylus cf. ocellatus, and five snake species (four Colubridae and one Viperidae preyer on small individuals or small anuran species.

The VIMOS Public Extragalactic Redshift Survey. Measuring the growth rate of structure around cosmic voids

Science.gov (United States)

Hawken, A. J.; Granett, B. R.; Iovino, A.; Guzzo, L.; Peacock, J. A.; de la Torre, S.; Garilli, B.; Bolzonella, M.; Scodeggio, M.; Abbas, U.; Adami, C.; Bottini, D.; Cappi, A.; Cucciati, O.; Davidzon, I.; Fritz, A.; Franzetti, P.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marulli, F.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Arnouts, S.; Bel, J.; Branchini, E.; De Lucia, G.; Ilbert, O.; Moscardini, L.; Percival, W. J.

2017-11-01

We aim to develop a novel methodology for measuring thegrowth rate of structure around cosmic voids. We identified voids in the completed VIMOS Public Extragalactic Redshift Survey (VIPERS), using an algorithm based on searching for empty spheres. We measured the cross-correlation between the centres of voids and the complete galaxy catalogue. The cross-correlation function exhibits a clear anisotropy in both VIPERS fields (W1 and W4), which is characteristic of linear redshift space distortions. By measuring the projected cross-correlation and then de-projecting it we are able to estimate the un-distorted cross-correlation function. We propose that given a sufficiently well-measured cross-correlation function one should be able to measure the linear growth rate of structure by applying a simple linear Gaussian streaming model for the redshift space distortions (RSD). Our study of voids in 306 mock galaxy catalogues mimicking the VIPERS fields suggests that VIPERS is capable of measuring β, the ratio of the linear growth rate to the bias, with an error of around 25%. Applying our method to the VIPERS data, we find a value for the redshift space distortion parameter, β = 0.423-0.108+0.104 which, given the bias of the galaxy population we use, gives a linear growth rate of f σ8 = 0.296-0.078+0.075 at z = 0.727. These results are consistent with values observed in parallel VIPERS analyses that use standard techniques. Based on observations collected at the European Southern Observatory, Cerro Paranal, Chile, using the Very Large Telescope under programs 182.A-0886 and partly 070.A-9007. Also based on observations obtained with MegaPrime/MegaCam, a joint project of CFHT and CEA/DAPNIA, at the Canada-France-Hawaii Telescope (CFHT), which is operated by the National Research Council (NRC) of Canada, the Institut National des Sciences de l'Univers of the Centre National de la Recherche Scientifique (CNRS) of France, and the University of Hawaii. This work is based in

Evaluation of surgically assisted rapid maxillary expansion with piezosurgery versus oscillating saw and chisel osteotomy - a randomized prospective trial.

Science.gov (United States)

Rana, Majeed; Gellrich, Nils-Claudius; Rana, Madiha; Piffkó, Jozsef; Kater, Wolfgang

2013-02-17

Ultrasonic bone-cutting surgery has been introduced as a feasible alternative to the conventional sharp instruments used in craniomaxillofacial surgery because of its precision and safety. The piezosurgery medical device allows the efficient cutting of mineralized tissues with minimal trauma to soft tissues. Piezoelectric osteotome has found its role in surgically assisted rapid maxillary expansion (SARME), a procedure well established to correct transverse maxillary discrepancies. The advantages include minimal risk to critical anatomic structures. The purpose of this clinical comparative study (CIS 2007-237-M) was to present the advantages of the piezoelectric cut as a minimally invasive device in surgically assisted, rapid maxillary expansion by protecting the maxillary sinus mucosal lining. Thirty patients (18 females and 12 males) at the age of 18 to 54 underwent a surgically assisted palatal expansion of the maxilla with a combined orthodontic and surgical approach. The patients were randomly divided into two separate treatment groups. While Group 1 received conventional surgery using an oscillating saw, Group 2 was treated with piezosurgery. The following parameters were examined: blood pressure, blood values, required medication, bleeding level in the maxillary sinus, duration of inpatient stay, duration of surgery and height of body temperature. The results displayed no statistically significant differences between the two groups regarding laboratory blood values and inpatient stay. The duration of surgery revealed a significant discrepancy. Deploying piezosurgery took the surgeon an average of 10 minutes longer than working with a conventional-saw technique. However, the observation of the bleeding level in the paranasal sinus presented a major and statistically significant advantage of piezosurgery: on average the bleeding level was one category above the one of the remaining patients. This method of piezoelectric surgery with all its advantages is going

Crimson Viper 2015

Science.gov (United States)

2015-08-01

91 Figure 56: Cisco Access Points (Left) ASTERIA (Center) ASUS ROG G751 (Right) ........ 92 Figure 57: Actual gear onsite at CV15 (1) SEEK...nature of the applications would make them marketable in many areas. Cultural Factors: Cultural factors that affected the TransApps demonstration...operations. Biometrics Support Technologies Figure 56: Cisco Access Points (Left) ASTERIA (Center) ASUS ROG G751 (Right) The Cisco

Viper Plague Project

Science.gov (United States)

2009-07-01

pyrogenes , 40x……………………………………….……….……19 Figure 11a, 11b. Polystyrene 1.17 µm magnetic beads only labeled with the conjugated fluorescent Proteus...assessing the level of non-specific binding for the conjugated Proteus antibody against combined P. vulgaris, S. aureus, and S. pyrogenes , 40x. 10...because the VSW cell line naturally harbors an endogenous retrovirus. Up to this point, the main obstacle for the identification of the bacterial

Crotaline Fab antivenom appears to be effective in cases of severe North American pit viper envenomation: An integrative review

Directory of Open Access Journals (Sweden)

Mlynarchek Sara L

2009-06-01

Full Text Available Abstract Background In 2000, the United States Food and Drug Administration approved Crotalidae Polyvalent Immune Fab (Ovine (hereafter, FabAV, "for the management of patients with minimal to moderate North American Crotalid envenomation." Because whole-IgG pit viper antivenom is no longer available in the United States, FabAV is currently the only specific treatment option available to United States clinicians treating snakebite victims of any severity. No clinical trial data are available concerning the effectiveness of FabAV for treatment of severe snakebite, but several published articles describe its use in this setting. Methods We performed a comprehensive review of the English-language medical literature to identify all publications (1996 to July, 2008 containing data about the administration of FabAV. Two trained reviewers separately extracted case-level data concerning the administration of FabAV to patients with severe envenomation by North American crotaline snakes to a standardized form. Descriptive statistics were used. In addition, we hand-searched the US National Poison Data System reports for the years 2000–2006 to identify and describe any reports of death that occurred after FabAV administration. Results The literature review found 147 unique publications regarding FabAV. Twenty-four evaluable cases of severe human envenomation treated with FabAV were identified in 19 publications. Seven cases were described in five cohort studies, and 17 cases were described in 14 single patient case reports or non-cohort case series. Sixty-five specific severe venom effects were reported in these 24 patients, of which 50 effects (77% improved or resolved after FabAV therapy. Initial control of all severe venom effects was achieved in 12 patients (50%. The rate at which initial control was achieved was significantly higher among patients reported in the cohort series than in the case series and non-cohort reports (100% vs. 29%, P = 0

Nanoliter-droplet acoustic streaming via ultra high frequency surface acoustic waves.

Science.gov (United States)

Shilton, Richie J; Travagliati, Marco; Beltram, Fabio; Cecchini, Marco

2014-08-06

The relevant length scales in sub-nanometer amplitude surface acoustic wave-driven acoustic streaming are demonstrated. We demonstrate the absence of any physical limitations preventing the downscaling of SAW-driven internal streaming to nanoliter microreactors and beyond by extending SAW microfluidics up to operating frequencies in the GHz range. This method is applied to nanoliter scale fluid mixing. © 2014 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Detection, Identification, Location, and Remote Sensing using SAW RFID Sensor Tags

Science.gov (United States)

Barton, Richard J.

2009-01-01

In this presentation, we will consider the problem of simultaneous detection, identification, location estimation, and remote sensing for multiple objects. In particular, we will describe the design and testing of a wireless system capable of simultaneously detecting the presence of multiple objects, identifying each object, and acquiring both a low-resolution estimate of location and a high-resolution estimate of temperature for each object based on wireless interrogation of passive surface acoustic wave (SAW) radiofrequency identification (RFID) sensor tags affixed to each object. The system is being studied for application on the lunar surface as well as for terrestrial remote sensing applications such as pre-launch monitoring and testing of spacecraft on the launch pad and monitoring of test facilities. The system utilizes a digitally beam-formed planar receiving antenna array to extend range and provide direction-of-arrival information coupled with an approximate maximum-likelihood signal processing algorithm to provide near-optimal estimation of both range and temperature. The system is capable of forming a large number of beams within the field of view and resolving the information from several tags within each beam. The combination of both spatial and waveform discrimination provides the capability to track and monitor telemetry from a large number of objects appearing simultaneously within the field of view of the receiving array. In the presentation, we will summarize the system design and illustrate several aspects of the operational characteristics and signal structure. We will examine the theoretical performance characteristics of the system and compare the theoretical results with results obtained from experiments in both controlled laboratory environments and in the field.

Saw Palmetto for Symptom Management During Radiation Therapy for Prostate Cancer.

Science.gov (United States)

Wyatt, Gwen K; Sikorskii, Alla; Safikhani, Abolfazl; McVary, Kevin T; Herman, James

2016-06-01

Lower urinary tract symptoms (LUTSs) affect 75%-80% of men undergoing radiation therapy (RT) for prostate cancer. To determine the safety, maximum tolerated dose (MTD), and preliminary efficacy of Serenoa repens commonly known as saw palmetto (SP) for management of LUTS during RT for prostate cancer. The dose finding phase used the time-to-event continual reassessment method to evaluate safety of three doses (320, 640, and 960 mg) of SP. Dose-limiting toxicities were assessed for 22 weeks using the Common Terminology Criteria for Adverse Events for nausea, gastritis, and anorexia. The exploratory randomized controlled trial phase assessed preliminary efficacy of the MTD against placebo. The primary outcome of LUTS was measured over 22 weeks using the International Prostate Symptom Score. Additional longitudinal assessments included quality of life measured with the Functional Assessment of Cancer Therapy-Prostate. The dose finding phase was completed by 27 men who reported no dose-limiting toxicities and with 20 participants at the MTD of 960 mg daily. The exploratory randomized controlled trial phase included 21 men, and no statistically significant differences in the International Prostate Symptom Score were observed. The prostate-specific concerns score of the Functional Assessment of Cancer Therapy-Prostate improved in the SP group (P = 0.03). Of 11 men in the placebo group, two received physician-prescribed medications to manage LUTS compared with none of the 10 men in the SP group. SP at 960 mg may be a safe herbal supplement, but its efficacy in managing LUTS during RT needs further investigation. Copyright © 2016 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Dynamical implications of sample shape for avalanches in 2-dimensional random-field Ising model with saw-tooth domain wall

Science.gov (United States)

Tadić, Bosiljka

2018-03-01

We study dynamics of a built-in domain wall (DW) in 2-dimensional disordered ferromagnets with different sample shapes using random-field Ising model on a square lattice rotated by 45 degrees. The saw-tooth DW of the length Lx is created along one side and swept through the sample by slow ramping of the external field until the complete magnetisation reversal and the wall annihilation at the open top boundary at a distance Ly. By fixing the number of spins N =Lx ×Ly = 106 and the random-field distribution at a value above the critical disorder, we vary the ratio of the DW length to the annihilation distance in the range Lx /Ly ∈ [ 1 / 16 , 16 ] . The periodic boundary conditions are applied in the y-direction so that these ratios comprise different samples, i.e., surfaces of cylinders with the changing perimeter Lx and height Ly. We analyse the avalanches of the DW slips between following field updates, and the multifractal structure of the magnetisation fluctuation time series. Our main findings are that the domain-wall lengths materialised in different sample shapes have an impact on the dynamics at all scales. Moreover, the domain-wall motion at the beginning of the hysteresis loop (HLB) probes the disorder effects resulting in the fluctuations that are significantly different from the large avalanches in the central part of the loop (HLC), where the strong fields dominate. Specifically, the fluctuations in HLB exhibit a wide multi-fractal spectrum, which shifts towards higher values of the exponents when the DW length is reduced. The distributions of the avalanches in this segments of the loops obey power-law decay and the exponential cutoffs with the exponents firmly in the mean-field universality class for long DW. In contrast, the avalanches in the HLC obey Tsallis density distribution with the power-law tails which indicate the new categories of the scale invariant behaviour for different ratios Lx /Ly. The large fluctuations in the HLC, on the other

An uncommon initial presentation of snake bite-subarachnoid hemorrhage: A case report with literature review

Directory of Open Access Journals (Sweden)

Manoj Kumar Roy

2015-01-01

Full Text Available Snake bites are very common in India, particularly in West Bengal. Snake bite can cause various hematological, neuromyopathical complications. It can be very fatal if not detected and treated early. Timely intervention can save the patient. We are reporting a case of hematotoxic Russell viper snake bite presented with subarachnoid hemorrhage. Patient was successfully treated with antivenom serum (AVS along with other conservative management. Subarachnoid hemorrhage as an initial presentation in viper bite is very rare and we discuss the case with proper literature review.