WorldWideScience

Sample records for satellite images showed

  1. Geostationary Satellite (GOES) Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Visible and Infrared satellite imagery taken from radiometer instruments on SMS (ATS) and GOES satellites in geostationary orbit. These satellites produced...

  2. Biogeography based Satellite Image Classification

    CERN Document Server

    Panchal, V K; Kaur, Navdeep; Kundra, Harish

    2009-01-01

    Biogeography is the study of the geographical distribution of biological organisms. The mindset of the engineer is that we can learn from nature. Biogeography Based Optimization is a burgeoning nature inspired technique to find the optimal solution of the problem. Satellite image classification is an important task because it is the only way we can know about the land cover map of inaccessible areas. Though satellite images have been classified in past by using various techniques, the researchers are always finding alternative strategies for satellite image classification so that they may be prepared to select the most appropriate technique for the feature extraction task in hand. This paper is focused on classification of the satellite image of a particular land cover using the theory of Biogeography based Optimization. The original BBO algorithm does not have the inbuilt property of clustering which is required during image classification. Hence modifications have been proposed to the original algorithm and...

  3. Shadow imaging of geosynchronous satellites

    Science.gov (United States)

    Douglas, Dennis Michael

    Geosynchronous (GEO) satellites are essential for modern communication networks. If communication to a GEO satellite is lost and a malfunction occurs upon orbit insertion such as a solar panel not deploying there is no direct way to observe it from Earth. Due to the GEO orbit distance of ~36,000 km from Earth's surface, the Rayleigh criteria dictates that a 14 m telescope is required to conventionally image a satellite with spatial resolution down to 1 m using visible light. Furthermore, a telescope larger than 30 m is required under ideal conditions to obtain spatial resolution down to 0.4 m. This dissertation evaluates a method for obtaining high spatial resolution images of GEO satellites from an Earth based system by measuring the irradiance distribution on the ground resulting from the occultation of the satellite passing in front of a star. The representative size of a GEO satellite combined with the orbital distance results in the ground shadow being consistent with a Fresnel diffraction pattern when observed at visible wavelengths. A measurement of the ground shadow irradiance is used as an amplitude constraint in a Gerchberg-Saxton phase retrieval algorithm that produces a reconstruction of the satellite's 2D transmission function which is analogous to a reverse contrast image of the satellite. The advantage of shadow imaging is that a terrestrial based redundant set of linearly distributed inexpensive small telescopes, each coupled to high speed detectors, is a more effective resolved imaging system for GEO satellites than a very large telescope under ideal conditions. Modeling and simulation efforts indicate sub-meter spatial resolution can be readily achieved using collection apertures of less than 1 meter in diameter. A mathematical basis is established for the treatment of the physical phenomena involved in the shadow imaging process. This includes the source star brightness and angular extent, and the diffraction of starlight from the satellite

  4. Smoothing of Fused Spectral Consistent Satellite Images

    DEFF Research Database (Denmark)

    Sveinsson, Johannes; Aanæs, Henrik; Benediktsson, Jon Atli

    2006-01-01

    on satellite data. Additionally, most conventional methods are loosely connected to the image forming physics of the satellite image, giving these methods an ad hoc feel. Vesteinsson et al. (2005) proposed a method of fusion of satellite images that is based on the properties of imaging physics...

  5. Antarctica: measuring glacier velocity from satellite images.

    Science.gov (United States)

    Lucchitta, B K; Ferguson, H M

    1986-11-28

    Many Landsat images of Antarctica show distinctive flow and crevasse features in the floating part of ice streams and outlet glaciers immediately below their grounding zones. Some of the features, which move with the glacier or ice stream, remain visible over many years and thus allow time-lapse measurements of ice velocities. Measurements taken from Landsat images of features on Byrd Glacier agree well with detailed ground and aerial observations. The satellite-image technique thus offers a rapid and cost-effective method of obtaining average velocities, to a first order of accuracy, of many ice streams and outlet glaciers near their termini.

  6. Forecasting Hurricane by Satellite Image

    Science.gov (United States)

    Liu, M. Y.

    Earth is an endanger planet. Severe weather, especially hurricanes, results in great disaster all the world. World Meteorology Organization and United Nations Environment Program established intergovernment Panel on Climate Change (IPCC) to offer warnings about the present and future disasters of the Earth. It is the mission for scientists to design warning system to predict the severe weather system and to reduce the damage of the Earth. Hurricanes invade all the world every year and made millions damage to all the people. Scientists in weather service applied satellite images and synoptic data to forecast the information for the next hours for warning purposes. Regularly, hurricane hits on Taiwan island directly will pass through her domain and neighbor within 10 hours. In this study, we are going to demonstrate a tricky hurricane NARI invaded Taiwan on September 16, 2000. She wandered in the neighborhood of the island more than 72 hours and brought heavy rainfall over the island. Her track is so tricky that scientists can not forecast her path using the regular method. Fortunately, all scientists in the Central Weather Bureau paid their best effort to fight against the tricky hurricane. Applying the new developed technique to analysis the satellite images with synoptic data and radar echo, scientists forecasted the track, intensity and rainfall excellently. Thus the damage of the severe weather reduced significantly.

  7. A neuromorphic approach to satellite image understanding

    Science.gov (United States)

    Partsinevelos, Panagiotis; Perakakis, Manolis

    2014-05-01

    , multispectral, very high resolution imagery. Second, we attempt to relate the experienced against the non-experienced user understanding in order to indirectly assess the possible limits of purely computational systems. In other words, obtain the conceptual limits of computation vs human cognition concerning feature recognition from satellite imagery. Preliminary results of this pilot study show relations between collected data and differentiation of the image attributes which indicates that our methodology can lead to important results.

  8. Egypt satellite images for land surface characterization

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay

    Satellite images provide information on the land surface properties. From optical remote sensing images in the blue, green, red and near-infrared part of the electromagnetic spectrum it is possible to identify a large number of surface features. The report briefly describes different satellite...

  9. Satellite signal shows storage-unloading subsidence in North China

    Science.gov (United States)

    Moiwo, J. P.; Tao, F.

    2015-06-01

    Worsening water storage depletion (WSD) contributes to environmental degradation, land subsidence and earthquake and could disrupt food production/security and social stability. There is need for efficient water use strategies in North China, a pivotal agrarian, industrial and political base in China with a widespread WSD. This study integrates satellite, model and field data products to investigate WSD and land subsidence in North China. In the first step, GRACE (Gravity Recovery and Climate Experiment) mass rates are used to show WSD in the region. Next, GRACE total water storage (TWS) is corrected for soil water storage (SWS) to derive groundwater storage (GWS) using GLDAS (Global Land Data Assimilation System) data products. The derived GWS is compared with GWS obtained from field-measured groundwater level to show land subsidence in the study area. Then GPS (Global Positioning System) data of relative land surface change (LSC) are used to confirm the subsidence due to WSD. A total of ~ 96 near-consecutive months (January 2002 through December 2009) of datasets are used in the study. Based on GRACE mass rates, TWS depletion is 23.76 ± 1.74 mm yr-1 or 13.73 ± 1.01 km3 yr-1 in the 578 000 km2 study area. This is ~ 31 % of the slated 45 km3 yr-1 water delivery in 2050 via the South-North Water Diversion Project. Analysis of relative LSC shows subsidence of 7.29 ± 0.35 mm yr-1 in Beijing and 2.74 ± 0.16 mm yr-1 in North China. About 11.53 % (2.74 ± 0.18 mm or 1.58 ± 0.12 km3) of the TWS and 8.37 % (1.52 ± 0.70 mm or 0.88 ± 0.03 km3) of the GWS are attributed to storage reductions accompanying subsidence in the region. Although interpretations of the findings require caution due to the short temporal and large spatial coverage, the concurrence of WSD and land subsidence could have adverse implications for the study area. It is critical that the relevant stakeholders embark on resource-efficient measures to ensure water availability, food security, ecological

  10. Structural High-resolution Satellite Image Indexing

    OpenAIRE

    Xia, Gui-Song; YANG, WEN; Delon, Julie; Gousseau, Yann; Sun, Hong; Maître, Henri

    2010-01-01

    International audience; Satellite images with high spatial resolution raise many challenging issues in image understanding and pattern recognition. First, they allow measurement of small objects maybe up to 0.5 m, and both texture and geometrical structures emerge simultaneously. Second, objects in the same type of scenes might appear at different scales and orientations. Consequently, image indexing methods should combine the structure and texture information of images and comply with some i...

  11. Satellite imager calibration and validation

    CSIR Research Space (South Africa)

    Vhengani, L

    2010-10-01

    Full Text Available The success or failure of any earth observation mission depends on the quality of its data. Data quality is assessed by determining the radiometric, spatial, spectral and geometric fidelity of the satellite sensor. The process is termed calval...

  12. Model-based satellite image fusion

    DEFF Research Database (Denmark)

    Aanæs, Henrik; Sveinsson, J. R.; Nielsen, Allan Aasbjerg

    2008-01-01

    A method is proposed for pixel-level satellite image fusion derived directly from a model of the imaging sensor. By design, the proposed method is spectrally consistent. It is argued that the proposed method needs regularization, as is the case for any method for this problem. A framework for pixel...

  13. THERMAL AND VISIBLE SATELLITE IMAGE FUSION USING WAVELET IN REMOTE SENSING AND SATELLITE IMAGE PROCESSING

    Directory of Open Access Journals (Sweden)

    A. H. Ahrari

    2017-09-01

    Full Text Available Multimodal remote sensing approach is based on merging different data in different portions of electromagnetic radiation that improves the accuracy in satellite image processing and interpretations. Remote Sensing Visible and thermal infrared bands independently contain valuable spatial and spectral information. Visible bands make enough information spatially and thermal makes more different radiometric and spectral information than visible. However low spatial resolution is the most important limitation in thermal infrared bands. Using satellite image fusion, it is possible to merge them as a single thermal image that contains high spectral and spatial information at the same time. The aim of this study is a performance assessment of thermal and visible image fusion quantitatively and qualitatively with wavelet transform and different filters. In this research, wavelet algorithm (Haar and different decomposition filters (mean.linear,ma,min and rand for thermal and panchromatic bands of Landast8 Satellite were applied as shortwave and longwave fusion method . Finally, quality assessment has been done with quantitative and qualitative approaches. Quantitative parameters such as Entropy, Standard Deviation, Cross Correlation, Q Factor and Mutual Information were used. For thermal and visible image fusion accuracy assessment, all parameters (quantitative and qualitative must be analysed with respect to each other. Among all relevant statistical factors, correlation has the most meaningful result and similarity to the qualitative assessment. Results showed that mean and linear filters make better fused images against the other filters in Haar algorithm. Linear and mean filters have same performance and there is not any difference between their qualitative and quantitative results.

  14. Spectrally Consistent Satellite Image Fusion with Improved Image Priors

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Aanæs, Henrik; Jensen, Thomas B.S.;

    2006-01-01

    Here an improvement to our previous framework for satellite image fusion is presented. A framework purely based on the sensor physics and on prior assumptions on the fused image. The contributions of this paper are two fold. Firstly, a method for ensuring 100% spectrally consistency is proposed......, even when more sophisticated image priors are applied. Secondly, a better image prior is introduced, via data-dependent image smoothing....

  15. Low-Cost Satellite Infrared Imager Study

    Science.gov (United States)

    2007-11-02

    2,297.00 10 MATLAB , Simulink , Symbolic Math Toolbox (2 ea @ £894) £1,788.00 11 MATLAB Image Processing Toolbox (2 ea at £192) £384.00 12 MATLAB ...Figure 1: MWIR and TIR satellite imagery. On the left is a BIRD image of forest fires on the Portuguese/ Spanish border3 and the image on right is...space-borne MWIR and TIR imagers, instrument engineers are continually evaluating advances in the miniaturization of detector technology. One

  16. Entropy-Based Block Processing for Satellite Image Registration

    Directory of Open Access Journals (Sweden)

    Ikhyun Lee

    2012-11-01

    Full Text Available Image registration is an important task in many computer vision applications such as fusion systems, 3D shape recovery and earth observation. Particularly, registering satellite images is challenging and time-consuming due to limited resources and large image size. In such scenario, state-of-the-art image registration methods such as scale-invariant feature transform (SIFT may not be suitable due to high processing time. In this paper, we propose an algorithm based on block processing via entropy to register satellite images. The performance of the proposed method is evaluated using different real images. The comparative analysis shows that it not only reduces the processing time but also enhances the accuracy.

  17. Haystack Ultrawideband Satellite Imaging Radar

    Science.gov (United States)

    2014-09-01

    enable long-range imaging. In 2013, a major upgrade to the facility was completed, adding a millimeter - wave W-band radar capability to Haystack’s X...diameter antenna was completely rebuilt to provide a 100 μm root-mean-square (rms) surface accuracy to support operation at the 3 mm wave - length (W...electromagnetic wave propagation through the troposphere. − The signal processing system lev- eraged Lincoln Laboratory‘s Radar Open Systems

  18. Change detection in satellite images

    Science.gov (United States)

    Thonnessen, U.; Hofele, G.; Middelmann, W.

    2005-05-01

    Change detection plays an important role in different military areas as strategic reconnaissance, verification of armament and disarmament control and damage assessment. It is the process of identifying differences in the state of an object or phenomenon by observing it at different times. The availability of spaceborne reconnaissance systems with high spatial resolution, multi spectral capabilities, and short revisit times offer new perspectives for change detection. Before performing any kind of change detection it is necessary to separate changes of interest from changes caused by differences in data acquisition parameters. In these cases it is necessary to perform a pre-processing to correct the data or to normalize it. Image registration and, corresponding to this task, the ortho-rectification of the image data is a further prerequisite for change detection. If feasible, a 1-to-1 geometric correspondence should be aspired for. Change detection on an iconic level with a succeeding interpretation of the changes by the observer is often proposed; nevertheless an automatic knowledge-based analysis delivering the interpretation of the changes on a semantic level should be the aim of the future. We present first results of change detection on a structural level concerning urban areas. After pre-processing, the images are segmented in areas of interest and structural analysis is applied to these regions to extract descriptions of urban infrastructure like buildings, roads and tanks of refineries. These descriptions are matched to detect changes and similarities.

  19. Internal waves and vortices in satellite images

    CERN Document Server

    Sparavigna, Amelia Carolina

    2012-01-01

    Some recent papers proposed the use of the satellite images of Google Earth in teaching physics, in particular to see some behaviours of waves. Reflection, refraction, diffraction and interference are easy to be found in these satellite maps. Besides Google Earth, other sites exist, such as Earth Observatory or Earth Snapshot, suitable for illustrating the large-scale phenomena in atmosphere and oceans In this paper, we will see some examples for teaching surface and internal sea waves, and internal waves and the K\\'arm\\'an vortices in the atmosphere. Aim of this proposal is attracting the interest of students of engineering schools to the physics of waves.

  20. AO corrected satellite imaging from Mount Stromlo

    Science.gov (United States)

    Bennet, F.; Rigaut, F.; Price, I.; Herrald, N.; Ritchie, I.; Smith, C.

    2016-07-01

    The Research School of Astronomy and Astrophysics have been developing adaptive optics systems for space situational awareness. As part of this program we have developed satellite imaging using compact adaptive optics systems for small (1-2 m) telescopes such as those operated by Electro Optic Systems (EOS) from the Mount Stromlo Observatory. We have focused on making compact, simple, and high performance AO systems using modern high stroke high speed deformable mirrors and EMCCD cameras. We are able to track satellites down to magnitude 10 with a Strehl in excess of 20% in median seeing.

  1. The best printing methods to print satellite images

    Directory of Open Access Journals (Sweden)

    G.A. Yousif

    2011-12-01

    In this paper different printing systems were used to print an image of SPOT-4 satellite, caver part of Sharm Elshekh area, Sinai, Egypt, on the same type of paper as much as possible, especially in the photography. This step is followed by measuring the experimental data, and analyzed colors to determine the best printing systems for satellite image printing data. The laser system is the more printing system where produce a wider range of color and highest densities of ink and access much color detail. Followed by the offset system which it recorded the best dot gain. Moreover, the study shows that it can use the advantages of each method according to the satellite image color and quantity to be produced.

  2. Imaging artificial satellites: An observational challenge

    Science.gov (United States)

    Smith, D. A.; Hill, D. C.

    2016-10-01

    According to the Union of Concerned Scientists, as of the beginning of 2016 there are 1381 active satellites orbiting the Earth, and the United States' Space Surveillance Network tracks about 8000 manmade orbiting objects of baseball-size and larger. NASA estimates debris larger than 1 cm to number more than half a million. The largest ones can be seen by eye—unresolved dots of light that move across the sky in minutes. For most astrophotographers, satellites are annoying streaks that can ruin hours of work. However, capturing a resolved image of an artificial satellite can pose an interesting challenge for a student, and such a project can provide connections between objects in the sky and commercial and political activities here on Earth.

  3. Simultaneous Fusion and Denoising of Panchromatic and Multispectral Satellite Images

    Science.gov (United States)

    Ragheb, Amr M.; Osman, Heba; Abbas, Alaa M.; Elkaffas, Saleh M.; El-Tobely, Tarek A.; Khamis, S.; Elhalawany, Mohamed E.; Nasr, Mohamed E.; Dessouky, Moawad I.; Al-Nuaimy, Waleed; Abd El-Samie, Fathi E.

    2012-12-01

    To identify objects in satellite images, multispectral (MS) images with high spectral resolution and low spatial resolution, and panchromatic (Pan) images with high spatial resolution and low spectral resolution need to be fused. Several fusion methods such as the intensity-hue-saturation (IHS), the discrete wavelet transform, the discrete wavelet frame transform (DWFT), and the principal component analysis have been proposed in recent years to obtain images with both high spectral and spatial resolutions. In this paper, a hybrid fusion method for satellite images comprising both the IHS transform and the DWFT is proposed. This method tries to achieve the highest possible spectral and spatial resolutions with as small distortion in the fused image as possible. A comparison study between the proposed hybrid method and the traditional methods is presented in this paper. Different MS and Pan images from Landsat-5, Spot, Landsat-7, and IKONOS satellites are used in this comparison. The effect of noise on the proposed hybrid fusion method as well as the traditional fusion methods is studied. Experimental results show the superiority of the proposed hybrid method to the traditional methods. The results show also that a wavelet denoising step is required when fusion is performed at low signal-to-noise ratios.

  4. Monitoring of wetlands Ecosystems using satellite images

    Science.gov (United States)

    Dabrowska-Zielinska, K.; Gruszczynska, M.; Yesou, H.; Hoscilo, A.

    Wetlands are very sensitive ecosystems, functioning as habitat for many organisms. Protection and regeneration of wetlands has been the crucial importance in ecological research and in nature conservation. Knowledge on biophysical properties of wetlands vegetation retrieved from satellite images will enable us to improve monitoring of these unique areas, very often impenetrable. The study covers Biebrza wetland situated in the Northeast part of Poland and is considered as Ramsar Convention test site. The research aims at establishing of changes in biophysical parameters as the scrub encroachment, lowering of the water table, and changes of the farming activity caused ecological changes at these areas. Data from the optical and microwave satellite images collected for the area of Biebrza marshland ecosystem have been analysed and compared with the detailed soil-vegetation ground measurements conducted in conjunction with the overflights. Satellite data include Landsat ETM, ERS-2 ATSR and SAR, SPOT VEGETATION, ENVISAT MERIS and ASAR, and NOAA AVHRR. From the optical data various vegetation indices have been calculated, which characterize the vegetation surface roughness, its moisture conditions and stage of development. Landsat ETM image has been used for classification of wetlands vegetation. For each class of vegetation various moisture indices have been developed. Ground data collected include wet and dry biomass, LAI, vegetation height, and TDR soil moisture. The water cloud model has been applied for retrieval of soil vegetation parameters taking into account microwave satellite images acquired at VV, HV and HH polarisations at different viewing angles. The vegetation parameters have been used for to distinguish changes, which occurred at the area. For each of the vegetation class the soil moisture was calculated from microwave data using developed algorithms. Results of this study will help mapping and monitoring wetlands with the high spatial and temporal

  5. Developing Geostationary Satellite Imaging at Lowell Observatory

    Science.gov (United States)

    van Belle, G.

    2016-09-01

    Lowell Observatory operates the Navy Precision Optical Interferometer (NPOI), and owns & operates the Discovery Channel Telescope (DCT). This unique & necessary combination of facilities positions Lowell to develop a robust program of observing geostationary, GPS-plane, and other high-altitude (&1000mi) satellites. NPOI is a six-beam long-baseline optical interferometer, located in Flagstaff, Arizona; the facility is supported by a partnership between Lowell Observatory, the US Naval Observatory, and the Naval Research Laboratory. NPOI operates year-round in the visible with baselines between 8 and 100 meters (up to 432m is available), conducting programs of astronomical research and imaging technology development. NPOI is the only such facility as yet to directly observe geostationary satellites, enabling milliarcsecond resolution of these objects. To enhance this capability towards true imaging of geosats, an ongoing program of facility upgrades will be outlined. These upgrades include AO-assisted 1.0-m apertures feeding each beam line, and new near-infrared instrumentation on the back end. The large apertures will enable `at-will' observations of objects brighter than mK = 8:3 in the near-IR, corresponding to brighter than mV = 11:3 in the visible. At its core, the system is enabled by a `wavelength-baseline bootstrapping' approach discussed herein. A complementary pilot imaging study of visible speckle and aperture masked imaging at Lowell's 4.3-m DCT, for constraining the low-spatial frequency imaging information, is also outlined.

  6. Satellite Imaging with Adaptive Optics on a 1 M Telescope

    Science.gov (United States)

    Bennet, F.; Price, I.; Rigaut, F.; Copeland, M.

    2016-09-01

    The Research School of Astronomy and Astrophysics at the Mount Stromlo Observatory in Canberra, Australia, have been developing adaptive optic (AO) systems for space situational awareness applications. We report on the development and demonstration of an AO system for satellite imaging using a 1 m telescope. The system uses the orbiting object as a natural guide star to measure atmospheric turbulence, and a deformable mirror to provide an optical correction. The AO system utilised modern, high speed and low noise EMCCD technology on both the wavefront sensor and imaging camera to achieve high performance, achieving a Strehl ratio in excess of 30% at 870 nm. Images are post processed with lucky imaging algorithms to further improve the final image quality. We demonstrate the AO system on stellar targets and Iridium satellites, achieving a near diffraction limited full width at half maximum. A specialised realtime controller allows our system to achieve a bandwidth above 100 Hz, with the wavefront sensor and control loop running at 2 kHz. The AO systems we are developing show how ground-based optical sensors can be used to manage the space environment. AO imaging systems can be used for satellite surveillance, while laser ranging can be used to determine precise orbital data used in the critical conjunction analysis required to maintain a safe space environment. We have focused on making this system compact, expandable, and versatile. We are continuing to develop this platform for other space situational awareness applications such as geosynchronous satellite astrometry, space debris characterisation, satellite imaging, and ground-to-space laser communication.

  7. Image Dodging Algorithm for GF-1 Satellite WFV Imagery

    Directory of Open Access Journals (Sweden)

    HAN Jie

    2016-12-01

    Full Text Available Image dodging method is one of the important processes that determines whether the mosaicking image can be used for remote sensing quantitative application. GF-1 satellite is the first satellite in CHEOS (Chinese high-resolution earth observation system. WFV multispectral sensor is one of the instruments onboard GF-1 satellite which consist of four cameras to mosaic imaging. According to the characteristics of WFV sensor, this paper proposes an image dodging algorithm based on cross/inter-radiometric calibration method. First, the traditional cross calibration method is applied to obtain the calibration coefficients of one WFV camera. Then statistical analysis and simulation methods are adopted to build the correlation models of DN and TOA (top of atmosphere radiances between adjacent cameras. The proposed method can not only accomplish the radiation performance transfer, but also can fulfill the image dodging. The experimental results show the cross/inter-radiometric calibration coefficients in this paper can effectively eliminate the radiation inconsistency problem of the adjacent camera image which realizes the image dodging. So our proposed dodging method can provide an important reference for other similar sensor in future.

  8. Satellite microglia show spontaneous electrical activity that is uncorrelated with activity of the attached neuron.

    Science.gov (United States)

    Wogram, Emile; Wendt, Stefan; Matyash, Marina; Pivneva, Tatyana; Draguhn, Andreas; Kettenmann, Helmut

    2016-06-01

    Microglia are innate immune cells of the brain. We have studied a subpopulation of microglia, called satellite microglia. This cell type is defined by a close morphological soma-to-soma association with a neuron, indicative of a direct functional interaction. Indeed, ultrastructural analysis revealed closely attached plasma membranes of satellite microglia and neurons. However, we found no apparent morphological specializations of the contact, and biocytin injection into satellite microglia showed no dye-coupling with the apposed neurons or any other cell. Likewise, evoked local field potentials or action potentials and postsynaptic potentials of the associated neuron did not lead to any transmembrane currents or non-capacitive changes in the membrane potential of the satellite microglia in the cortex and hippocampus. Both satellite and non-satellite microglia, however, showed spontaneous transient membrane depolarizations that were not correlated with neuronal activity. These events could be divided into fast-rising and slow-rising depolarizations, which showed different characteristics in satellite and non-satellite microglia. Fast-rising and slow-rising potentials differed with regard to voltage dependence. The frequency of these events was not affected by the application of tetrodotoxin, but the fast-rising event frequency decreased after application of GABA. We conclude that microglia show spontaneous electrical activity that is uncorrelated with the activity of adjacent neurons.

  9. Embedded Implementation of VHR Satellite Image Segmentation.

    Science.gov (United States)

    Li, Chao; Balla-Arabé, Souleymane; Ginhac, Dominique; Yang, Fan

    2016-05-27

    Processing and analysis of Very High Resolution (VHR) satellite images provide a mass of crucial information, which can be used for urban planning, security issues or environmental monitoring. However, they are computationally expensive and, thus, time consuming, while some of the applications, such as natural disaster monitoring and prevention, require high efficiency performance. Fortunately, parallel computing techniques and embedded systems have made great progress in recent years, and a series of massively parallel image processing devices, such as digital signal processors or Field Programmable Gate Arrays (FPGAs), have been made available to engineers at a very convenient price and demonstrate significant advantages in terms of running-cost, embeddability, power consumption flexibility, etc. In this work, we designed a texture region segmentation method for very high resolution satellite images by using the level set algorithm and the multi-kernel theory in a high-abstraction C environment and realize its register-transfer level implementation with the help of a new proposed high-level synthesis-based design flow. The evaluation experiments demonstrate that the proposed design can produce high quality image segmentation with a significant running-cost advantage.

  10. System refinement for content based satellite image retrieval

    Directory of Open Access Journals (Sweden)

    NourElDin Laban

    2012-06-01

    Full Text Available We are witnessing a large increase in satellite generated data especially in the form of images. Hence intelligent processing of the huge amount of data received by dozens of earth observing satellites, with specific satellite image oriented approaches, presents itself as a pressing need. Content based satellite image retrieval (CBSIR approaches have mainly been driven so far by approaches dealing with traditional images. In this paper we introduce a novel approach that refines image retrieval process using the unique properties to satellite images. Our approach uses a Query by polygon (QBP paradigm for the content of interest instead of using the more conventional rectangular query by image approach. First, we extract features from the satellite images using multiple tiling sizes. Accordingly the system uses these multilevel features within a multilevel retrieval system that refines the retrieval process. Our multilevel refinement approach has been experimentally validated against the conventional one yielding enhanced precision and recall rates.

  11. GRANULOMETRIC MAPS FROM HIGH RESOLUTION SATELLITE IMAGES

    Directory of Open Access Journals (Sweden)

    Catherine Mering

    2011-05-01

    Full Text Available A new method of land cover mapping from satellite images using granulometric analysis is presented here. Discontinuous landscapes such as steppian bushes of semi arid regions and recently growing urban settlements are especially concerned by this study. Spatial organisations of the land cover are quantified by means of the size distribution analysis of the land cover units extracted from high resolution remotely sensed images. A granulometric map is built by automatic classification of every pixel of the image according to the granulometric density inside a sliding neighbourhood. Granulometric mapping brings some advantages over traditional thematic mapping by remote sensing by focusing on fine spatial events and small changes in one peculiar category of the landscape.

  12. ANALYSIS OF THE EFFECTS OF IMAGE QUALITY ON DIGITAL MAP GENERATION FROM SATELLITE IMAGES

    Directory of Open Access Journals (Sweden)

    H. Kim

    2012-07-01

    Full Text Available High resolution satellite images are widely used to produce and update a digital map since they became widely available. It is well known that the accuracy of digital map produced from satellite images is decided largely by the accuracy of geometric modelling. However digital maps are made by a series of photogrammetric workflow. Therefore the accuracy of digital maps are also affected by the quality of satellite images, such as image interpretability. For satellite images, parameters such as Modulation Transfer Function(MTF, Signal to Noise Ratio(SNR and Ground Sampling Distance(GSD are used to present images quality. Our previous research stressed that such quality parameters may not represent the quality of image products such as digital maps and that parameters for image interpretability such as Ground Resolved Distance(GRD and National Imagery Interpretability Rating Scale(NIIRS need to be considered. In this study, we analyzed the effects of the image quality on accuracy of digital maps produced by satellite images. QuickBird, IKONOS and KOMPSAT-2 imagery were used to analyze as they have similar GSDs. We measured various image quality parameters mentioned above from these images. Then we produced digital maps from the images using a digital photogrammetric workstation. We analyzed the accuracy of the digital maps in terms of their location accuracy and their level of details. Then we compared the correlation between various image quality parameters and the accuracy of digital maps. The results of this study showed that GRD and NIIRS were more critical for map production then GSD, MTF or SNR.

  13. Geometric calibration of ERS satellite SAR images

    DEFF Research Database (Denmark)

    Mohr, Johan Jacob; Madsen, Søren Nørvang

    2001-01-01

    Geometric calibration of the European Remote Sensing (ERS) Satellite synthetic aperture radar (SAR) slant range images is important in relation to mapping areas without ground reference points and also in relation to automated processing. The relevant SAR system parameters are discussed...... on a seven-year ERS-1 and a four-year ERS-2 time series, the long term stability is found to be sufficient to allow a single calibration covering the entire mission period. A descending and an ascending orbit tandem pair of the ESA calibration site on Flevoland, suitable for calibration of ERS SAR processors...

  14. MODIS 2002-2003 Kansas Satellite Image Database (KSID)

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Satellite Image Database (KSID):2002-2003 consists of image data gathered by three sensors. The first image data are terrain-corrected, precision...

  15. ASTER 2002-2003 Kansas Satellite Image Database (KSID)

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Satellite Image Database (KSID):2002-2003 consists of image data gathered by three sensors. The first image data are terrain-corrected, precision...

  16. COMPARATIVE ANALYSIS OF SATELLITE IMAGE PRE-PROCESSING TECHNIQUES

    Directory of Open Access Journals (Sweden)

    T. Sree Sharmila

    2013-01-01

    Full Text Available Satellite images are corrupted by noise in its acquisition and transmission. The removal of noise from the image by attenuating the high frequency image components, removes some important details as well. In order to retain the useful information and improve the visual appearance, an effective denoising and resolution enhancement techniques are required. In this research, Hybrid Directional Lifting (HDL technique is proposed to retain the important details of the image and improve the visual appearance. The Discrete Wavelet Transform (DWT based interpolation technique is developed for enhancing the resolution of the denoised image. The performance of the proposed techniques are tested by Land Remote-Sensing Satellite (LANDSAT images, using the quantitative performance measure, Peak Signal to Noise Ratio (PSNR and computation time to show the significance of the proposed techniques. The PSNR of the HDL technique increases 1.02 dB compared to the standard denoising technique and the DWT based interpolation technique increases 3.94 dB. From the experimental results it reveals that newly developed image denoising and resolution enhancement techniques improve the image visual quality with rich textures.

  17. Polar-Orbiting Satellite (POES) Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Visible and Infrared satellite imagery taken from camera systems or radiometer instruments on satellites in orbit around the poles. Satellite campaigns include...

  18. AUTOMATIC APPROACH TO VHR SATELLITE IMAGE CLASSIFICATION

    Directory of Open Access Journals (Sweden)

    P. Kupidura

    2016-06-01

    Full Text Available In this paper, we present a proposition of a fully automatic classification of VHR satellite images. Unlike the most widespread approaches: supervised classification, which requires prior defining of class signatures, or unsupervised classification, which must be followed by an interpretation of its results, the proposed method requires no human intervention except for the setting of the initial parameters. The presented approach bases on both spectral and textural analysis of the image and consists of 3 steps. The first step, the analysis of spectral data, relies on NDVI values. Its purpose is to distinguish between basic classes, such as water, vegetation and non-vegetation, which all differ significantly spectrally, thus they can be easily extracted basing on spectral analysis. The second step relies on granulometric maps. These are the product of local granulometric analysis of an image and present information on the texture of each pixel neighbourhood, depending on the texture grain. The purpose of texture analysis is to distinguish between different classes, spectrally similar, but yet of different texture, e.g. bare soil from a built-up area, or low vegetation from a wooded area. Due to the use of granulometric analysis, based on mathematical morphology opening and closing, the results are resistant to the border effect (qualifying borders of objects in an image as spaces of high texture, which affect other methods of texture analysis like GLCM statistics or fractal analysis. Therefore, the effectiveness of the analysis is relatively high. Several indices based on values of different granulometric maps have been developed to simplify the extraction of classes of different texture. The third and final step of the process relies on a vegetation index, based on near infrared and blue bands. Its purpose is to correct partially misclassified pixels. All the indices used in the classification model developed relate to reflectance values, so the

  19. Automatic Approach to Vhr Satellite Image Classification

    Science.gov (United States)

    Kupidura, P.; Osińska-Skotak, K.; Pluto-Kossakowska, J.

    2016-06-01

    In this paper, we present a proposition of a fully automatic classification of VHR satellite images. Unlike the most widespread approaches: supervised classification, which requires prior defining of class signatures, or unsupervised classification, which must be followed by an interpretation of its results, the proposed method requires no human intervention except for the setting of the initial parameters. The presented approach bases on both spectral and textural analysis of the image and consists of 3 steps. The first step, the analysis of spectral data, relies on NDVI values. Its purpose is to distinguish between basic classes, such as water, vegetation and non-vegetation, which all differ significantly spectrally, thus they can be easily extracted basing on spectral analysis. The second step relies on granulometric maps. These are the product of local granulometric analysis of an image and present information on the texture of each pixel neighbourhood, depending on the texture grain. The purpose of texture analysis is to distinguish between different classes, spectrally similar, but yet of different texture, e.g. bare soil from a built-up area, or low vegetation from a wooded area. Due to the use of granulometric analysis, based on mathematical morphology opening and closing, the results are resistant to the border effect (qualifying borders of objects in an image as spaces of high texture), which affect other methods of texture analysis like GLCM statistics or fractal analysis. Therefore, the effectiveness of the analysis is relatively high. Several indices based on values of different granulometric maps have been developed to simplify the extraction of classes of different texture. The third and final step of the process relies on a vegetation index, based on near infrared and blue bands. Its purpose is to correct partially misclassified pixels. All the indices used in the classification model developed relate to reflectance values, so the preliminary step

  20. Panchromatic Satellite Image Classification for Flood Hazard Assessment

    Directory of Open Access Journals (Sweden)

    Ahmed Shaker

    2012-11-01

    Full Text Available The study aims to investigate the use of panchromatic (PAN satellite image data for flood hazard assessment with anaid of various digital image processing techniques. Two SPOT PAN satellite images covering part of the Nile River inEgypt were used to delineate the flood extent during the years 1997 and 1998 (before and after a high flood. Threeclassification techniques, including the contextual classifier, maximum likelihood classifier and minimum distanceclassifier, were applied to the following: 1 the original PAN image data, 2 the original PAN image data and grey-levelco-occurrence matrix texture created from the PAN data, and 3 the enhanced PAN image data using an edgesharpeningfilter. The classification results were assessed with reference to the results derived from manualdigitization and random checkpoints. Generally, the results showed improvement of the calculation of flood area whenan edge-sharpening filter was used. In addition, the maximum likelihood classifier yielded the best classificationaccuracy (up to 97% compared to the other two classifiers. The research demonstrates the benefits of using PANsatellite imagery as a potential data source for flood hazard assessment.

  1. Moving Target Information Extraction Based on Single Satellite Image

    Directory of Open Access Journals (Sweden)

    ZHAO Shihu

    2015-03-01

    Full Text Available The spatial and time variant effects in high resolution satellite push broom imaging are analyzed. A spatial and time variant imaging model is established. A moving target information extraction method is proposed based on a single satellite remote sensing image. The experiment computes two airplanes' flying speed using ZY-3 multispectral image and proves the validity of spatial and time variant model and moving information extracting method.

  2. Authentication Scheme Based on Principal Component Analysis for Satellite Images

    Directory of Open Access Journals (Sweden)

    Ashraf. K. Helmy

    2009-09-01

    Full Text Available This paper presents a multi-band wavelet image content authentication scheme for satellite images by incorporating the principal component analysis (PCA. The proposed schemeachieves higher perceptual transparency and stronger robustness. Specifically, the developed watermarking scheme can successfully resist common signal processing such as JPEG compression and geometric distortions such as cropping. In addition, the proposed scheme can be parameterized, thus resulting in more security. That is, an attacker may not be able to extract the embedded watermark if the attacker does not know the parameter.In an order to meet these requirements, the host image is transformed to YIQ to decrease the correlation between different bands, Then Multi-band Wavelet transform (M-WT is applied to each channel separately obtaining one approximate sub band and fifteen detail sub bands. PCA is then applied to the coefficients corresponding to the same spatial location in all detail sub bands. The last principle component band represents an excellent domain forinserting the water mark since it represents lowest correlated features in high frequency area of host image.One of the most important aspects of satellite images is spectral signature, the behavior of different features in different spectral bands, the results of proposed algorithm shows that the spectral stamp for different features doesn't tainted after inserting the watermark.

  3. Assessment of Satellite Images for Soil Salinity Studies

    Directory of Open Access Journals (Sweden)

    S.H. Sanaeinejad

    2012-04-01

    Full Text Available Soil salinity is one of the main environmental problems affecting extensive area in the world. There are some problems with traditional data collection methods for soil studies. Using the new methods and techniques such as remote sensing could overcome most of these problems. However using these data in areas with uncommon usages needed some researches to find the best calibration between the data and real situations in soil. This research was carried out using Landsat satellite images in Neyshabour area, North East of Iran. In order to prepare suitable learning samples for the image processing in this study, 300 locations were randomly selected in the area, among which 273 locations were finally selected as suitable surface soil samples. All samples were moved to laboratory and their electrical conductivity was measured. Six reflective bands of ETM+ satellite images taken from the study area in 2002 were used for the image processing analysis. Classification of different soil salinities was carried out using common algorithms of image classification based on the best composition bands and using statistical methods between soil salinity variables and digital numbers of the images to represent a suitable method. the research results showed that the reflective bands 7, 3, 4 and 1 are the best band composition for preparing the color composite images and for the classification of the salinity in this area. The highest coefficient of determination was R2=0.311 and R2=0.44 for saline and non-saline soil respectively using band 2 and 3 of the images at 5% significant level. Based on the results, it can be concluded that the potential of ETM+ images for delineation and identification of different soil salinity are limited.

  4. Super-Resolution Reconstruction of High-Resolution Satellite ZY-3 TLC Images.

    Science.gov (United States)

    Li, Lin; Wang, Wei; Luo, Heng; Ying, Shen

    2017-05-07

    Super-resolution (SR) image reconstruction is a technique used to recover a high-resolution image using the cumulative information provided by several low-resolution images. With the help of SR techniques, satellite remotely sensed images can be combined to achieve a higher-resolution image, which is especially useful for a two- or three-line camera satellite, e.g., the ZY-3 high-resolution Three Line Camera (TLC) satellite. In this paper, we introduce the application of the SR reconstruction method, including motion estimation and the robust super-resolution technique, to ZY-3 TLC images. The results show that SR reconstruction can significantly improve both the resolution and image quality of ZY-3 TLC images.

  5. Satellite image eavesdropping: a multidisciplinary science education project

    Energy Technology Data Exchange (ETDEWEB)

    Friedt, Jean-Michel [Association Projet Aurore, UFR-ST La Bouloie, 16, route de Gray, 25030 Besancon Cedex (France)

    2005-11-01

    Amateur reception of satellite images gathers a wide number of concepts and technologies which makes it attractive as an educational tool. We here introduce the reception of images emitted from NOAA series low-altitude Earth-orbiting satellites. We tackle various issues including the identification and prediction of the pass time of visible satellites, the building of the radio-frequency receiver and antenna after modelling their radiation pattern, and then the demodulation of the resulting audio signal for finally displaying an image of the Earth as seen from space.

  6. Detecting Anomaly Regions in Satellite Image Time Series Based on Sesaonal Autocorrelation Analysis

    Science.gov (United States)

    Zhou, Z.-G.; Tang, P.; Zhou, M.

    2016-06-01

    Anomaly regions in satellite images can reflect unexpected changes of land cover caused by flood, fire, landslide, etc. Detecting anomaly regions in satellite image time series is important for studying the dynamic processes of land cover changes as well as for disaster monitoring. Although several methods have been developed to detect land cover changes using satellite image time series, they are generally designed for detecting inter-annual or abrupt land cover changes, but are not focusing on detecting spatial-temporal changes in continuous images. In order to identify spatial-temporal dynamic processes of unexpected changes of land cover, this study proposes a method for detecting anomaly regions in each image of satellite image time series based on seasonal autocorrelation analysis. The method was validated with a case study to detect spatial-temporal processes of a severe flooding using Terra/MODIS image time series. Experiments demonstrated the advantages of the method that (1) it can effectively detect anomaly regions in each of satellite image time series, showing spatial-temporal varying process of anomaly regions, (2) it is flexible to meet some requirement (e.g., z-value or significance level) of detection accuracies with overall accuracy being up to 89% and precision above than 90%, and (3) it does not need time series smoothing and can detect anomaly regions in noisy satellite images with a high reliability.

  7. DETECTING ANOMALY REGIONS IN SATELLITE IMAGE TIME SERIES BASED ON SESAONAL AUTOCORRELATION ANALYSIS

    Directory of Open Access Journals (Sweden)

    Z.-G. Zhou

    2016-06-01

    Full Text Available Anomaly regions in satellite images can reflect unexpected changes of land cover caused by flood, fire, landslide, etc. Detecting anomaly regions in satellite image time series is important for studying the dynamic processes of land cover changes as well as for disaster monitoring. Although several methods have been developed to detect land cover changes using satellite image time series, they are generally designed for detecting inter-annual or abrupt land cover changes, but are not focusing on detecting spatial-temporal changes in continuous images. In order to identify spatial-temporal dynamic processes of unexpected changes of land cover, this study proposes a method for detecting anomaly regions in each image of satellite image time series based on seasonal autocorrelation analysis. The method was validated with a case study to detect spatial-temporal processes of a severe flooding using Terra/MODIS image time series. Experiments demonstrated the advantages of the method that (1 it can effectively detect anomaly regions in each of satellite image time series, showing spatial-temporal varying process of anomaly regions, (2 it is flexible to meet some requirement (e.g., z-value or significance level of detection accuracies with overall accuracy being up to 89% and precision above than 90%, and (3 it does not need time series smoothing and can detect anomaly regions in noisy satellite images with a high reliability.

  8. Path planning on satellite images for unmanned surface vehicles

    Directory of Open Access Journals (Sweden)

    Joe-Ming Yang

    2015-01-01

    Full Text Available In recent years, the development of autonomous surface vehicles has been a field of increasing research interest. There are two major areas in this field: control theory and path planning. This study focuses on path planning, and two objectives are discussed: path planning for Unmanned Surface Vehicles (USVs and implementation of path planning in a real map. In this paper, satellite thermal images are converted into binary images which are used as the maps for the Finite Angle A * algorithm (FAA *, an advanced A * algorithm that is used to determine safer and suboptimal paths for USVs. To plan a collision-free path, the algorithm proposed in this article considers the dimensions of surface vehicles. Furthermore, the turning ability of a surface vehicle is also considered, and a constraint condition is introduced to improve the quality of the path planning algorithm, which makes the traveled path smoother. This study also shows a path planning experiment performed on a real satellite thermal image, and the path planning results can be used by an USV

  9. Velocity estimation of an airplane through a single satellite image

    Institute of Scientific and Technical Information of China (English)

    Zhuxin Zhao; Gongjian Wen; Bingwei Hui; Deren Li

    2012-01-01

    The motion information of a moving target can be recorded in a single image by a push-broom satellite. A push-broom satellite image is composed of many image lines sensed at different time instants. A method to estimate the velocity of a flying airplane from a single image based on the imagery model of the linear push-broom sensor is proposed. Some key points on the high-resolution image of the plane are chosen to determine the velocity (speed and direction). The performance of the method is tested and verified by experiments using a WorldView-1 image.%The motion information of a moving target can be recorded in a single image by a push-broom satellite.A push-broom satellite image is composed of many image lines sensed at different time instants.A method to estimate the velocity of a flying airplane from a single image based on the imagery model of the linear push-broom sensor is proposed.Some key points on the high-resolution image of the plane are chosen to determine the velocity (speed and direction).The performance of the method is tested and verified by experiments using a WorldView-1 image.

  10. Satellite image collection modeling for large area hazard emergency response

    Science.gov (United States)

    Liu, Shufan; Hodgson, Michael E.

    2016-08-01

    Timely collection of critical hazard information is the key to intelligent and effective hazard emergency response decisions. Satellite remote sensing imagery provides an effective way to collect critical information. Natural hazards, however, often have large impact areas - larger than a single satellite scene. Additionally, the hazard impact area may be discontinuous, particularly in flooding or tornado hazard events. In this paper, a spatial optimization model is proposed to solve the large area satellite image acquisition planning problem in the context of hazard emergency response. In the model, a large hazard impact area is represented as multiple polygons and image collection priorities for different portion of impact area are addressed. The optimization problem is solved with an exact algorithm. Application results demonstrate that the proposed method can address the satellite image acquisition planning problem. A spatial decision support system supporting the optimization model was developed. Several examples of image acquisition problems are used to demonstrate the complexity of the problem and derive optimized solutions.

  11. Landsat TM and ETM+ Kansas Satellite Image Database (KSID)

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Satellite Image Database (KSID):2000-2001 consists of terrain-corrected, precision rectified spring, summer, and fall Landsat 5 Thematic Mapper (TM) and...

  12. Kansas Satellite Image Database (KSID) 2004-2005

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Satellite Image Database (KSID) 2004-2005 consists of terrain-corrected, precision rectified spring, summer, and fall Landsat 5 Thematic Mapper (TM)...

  13. Spatial Cloud Detection and Retrieval System for Satellite Images

    Directory of Open Access Journals (Sweden)

    Ayman Nasr

    2013-01-01

    Full Text Available In last the decade we witnessed a large increase in data generated by earth observing satellites. Hence, intelligent processing of the huge amount of data received by hundreds of earth receiving stations, with specific satellite image oriented approaches, presents itself as a pressing need. One of the most important steps in earlier stages of satellite image processing is cloud detection. Satellite images having a large percentage of cloud cannot be used in further analysis. While there are many approaches that deal with different semantic meaning, there are rarely approaches that deal specifically with cloud detection and retrieval. In this paper we introduce a novel approach that spatially detect and retrieve clouds in satellite images using their unique properties .Our approach is developed as spatial cloud detection and retrieval system (SCDRS that introduce a complete framework for specific semantic retrieval system. It uses a Query by polygon (QBP paradigm for the content of interest instead of using the more conventional rectangular query by image approach. First, we extract features from the satellite images using multiple tile sizes using spatial and textural properties of cloud regions. Second, we retrieve our tiles using a parametric statistical approach within a multilevel refinement process. Our approach has been experimentally validated against the conventional ones yielding enhanced precision and recall rates in the same time it gives more precise detection of cloud coverage regions.

  14. Satellite image based methods for fuels maps updating

    Science.gov (United States)

    Alonso-Benito, Alfonso; Hernandez-Leal, Pedro A.; Arbelo, Manuel; Gonzalez-Calvo, Alejandro; Moreno-Ruiz, Jose A.; Garcia-Lazaro, Jose R.

    2016-10-01

    Regular updating of fuels maps is important for forest fire management. Nevertheless complex and time consuming field work is usually necessary for this purpose, which prevents a more frequent update. That is why the assessment of the usefulness of satellite data and the development of remote sensing techniques that enable the automatic updating of these maps, is of vital interest. In this work, we have tested the use of the spectral bands of OLI (Operational Land Imager) sensor on board Landsat 8 satellite, for updating the fuels map of El Hierro Island (Spain). From previously digitized map, a set of 200 reference plots for different fuel types was created. A 50% of the plots were randomly used as a training set and the rest were considered for validation. Six supervised and 2 unsupervised classification methods were applied, considering two levels of detail. A first level with only 5 classes (Meadow, Brushwood, Undergrowth canopy cover >50%, Undergrowth canopy cover <15%, and Xeric formations), and the second one containing 19 fuel types. The level 1 classification methods yielded an overall accuracy ranging from 44% for Parellelepided to an 84% for Maximun Likelihood. Meanwhile, level 2 results showed at best, an unacceptable overall accuracy of 34%, which prevents the use of this data for such a detailed characterization. Anyway it has been demonstrated that in some conditions, images of medium spatial resolution, like Landsat 8-OLI, could be a valid tool for an automatic upgrade of fuels maps, minimizing costs and complementing traditional methodologies.

  15. Wind Statistics Offshore based on Satellite Images

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Mouche, Alexis; Badger, Merete

    2009-01-01

    Ocean wind maps from satellites are routinely processed both at Risø DTU and CLS based on the European Space Agency Envisat ASAR data. At Risø the a priori wind direction is taken from the atmospheric model NOGAPS (Navel Operational Global Atmospheric Prediction System) provided by the U.S. Navy......’s Master Environmental Library. At CLS the a priori wind direction is taken from the ECMWF (European Centre of Medium-range Weather Forecasting). It is also possible to use other sources of wind direction e.g. the satellite-based ASCAT wind directions as demonstrated by CLS. The wind direction has to known...

  16. Satellite Image Edge Detection for Population Distribution Pattern Identification using Levelset with Morphological Filtering Process

    Science.gov (United States)

    Harsiti; Munandar, T. A.; Suhendar, A.; Abdullah, A. G.; Rohendi, D.

    2017-03-01

    Population distribution pattern is directly related with economic gap of a region. Analysis of population distribution pattern is usually performed by studying statistical data on population. This study aimed to analyze population distribution pattern using image analysis concept, i.e. using satellite images. Levelset and morphological image filtering methods were used to analyze images to see distribution pattern. The research result showed that Levelset and morphological image filtering could remove a lot of noises in analysis result images and form object edge contours very clearly. The detected object contours were used as references to recognize population distribution pattern based on satellite image analysis. The pattern made based on the research result didn’t show optimal result because Levelset performed image segmentation based on the contours of the analyzed objects. Other segmentation methods should be combined with it to produce clearer population distribution pattern.

  17. Very high resolution satellite data: New challenges in image analysis

    Digital Repository Service at National Institute of Oceanography (India)

    Sathe, P.V.; Muraleedharan, P.M.

    with the exception that a ground-based view covers the entire optical range from 400 to 700 nm while satellite images will be wavelength-specific. Although the images will not surpass details observed by a human eye, they will, in principle, be comparable with aerial...

  18. Geospatial Visualization of Global Satellite Images with Vis-EROS

    Energy Technology Data Exchange (ETDEWEB)

    Standart, G. D.; Stulken, K. R.; Zhang, Xuesong; Zong, Ziliang

    2011-04-13

    The Earth Resources Observation and Science (EROS) Center of U.S. Geological Survey is currently managing and maintaining the world largest satellite images distribution system, which provides 24/7 free download service for researchers all over the globe in many areas such as Geology, Hydrology, Climate Modeling, and Earth Sciences. A large amount of geospatial data contained in satellite images maintained by EROS is generated every day. However, this data is not well utilized due to the lack of efficient data visualization tools. This software implements a method for visualizing various characteristics of the global satellite image download requests. More specifically, Keyhole Markup Language (KML) files are generated which can be loaded into an earth browser such as Google Earth. Colored rectangles associated with stored satellite scenes are painted onto the earth browser; and the color and opacity of each rectangle is varied as a function of the popularity of the corresponding satellite image. An analysis of the geospatial information obtained relative to specified time constraints provides an ability to relate image download requests to environmental, political, and social events.

  19. Heuristic Scheduling Algorithm Oriented Dynamic Tasks for Imaging Satellites

    Directory of Open Access Journals (Sweden)

    Maocai Wang

    2014-01-01

    Full Text Available Imaging satellite scheduling is an NP-hard problem with many complex constraints. This paper researches the scheduling problem for dynamic tasks oriented to some emergency cases. After the dynamic properties of satellite scheduling were analyzed, the optimization model is proposed in this paper. Based on the model, two heuristic algorithms are proposed to solve the problem. The first heuristic algorithm arranges new tasks by inserting or deleting them, then inserting them repeatedly according to the priority from low to high, which is named IDI algorithm. The second one called ISDR adopts four steps: insert directly, insert by shifting, insert by deleting, and reinsert the tasks deleted. Moreover, two heuristic factors, congestion degree of a time window and the overlapping degree of a task, are employed to improve the algorithm’s performance. Finally, a case is given to test the algorithms. The results show that the IDI algorithm is better than ISDR from the running time point of view while ISDR algorithm with heuristic factors is more effective with regard to algorithm performance. Moreover, the results also show that our method has good performance for the larger size of the dynamic tasks in comparison with the other two methods.

  20. Satellite image time series simulation for environmental monitoring

    Science.gov (United States)

    Guo, Tao

    2014-11-01

    The performance of environmental monitoring heavily depends on the availability of consecutive observation data and it turns out an increasing demand in remote sensing community for satellite image data in the sufficient resolution with respect to both spatial and temporal requirements, which appear to be conflictive and hard to tune tradeoffs. Multiple constellations could be a solution if without concerning cost, and thus it is so far interesting but very challenging to develop a method which can simultaneously improve both spatial and temporal details. There are some research efforts to deal with the problem from various aspects, a type of approaches is to enhance the spatial resolution using techniques of super resolution, pan-sharpen etc. which can produce good visual effects, but mostly cannot preserve spectral signatures and result in losing analytical value. Another type is to fill temporal frequency gaps by adopting time interpolation, which actually doesn't increase informative context at all. In this paper we presented a novel method to generate satellite images in higher spatial and temporal details, which further enables satellite image time series simulation. Our method starts with a pair of high-low resolution data set, and then a spatial registration is done by introducing LDA model to map high and low resolution pixels correspondingly. Afterwards, temporal change information is captured through a comparison of low resolution time series data, and the temporal change is then projected onto high resolution data plane and assigned to each high resolution pixel referring the predefined temporal change patterns of each type of ground objects to generate a simulated high resolution data. A preliminary experiment shows that our method can simulate a high resolution data with a good accuracy. We consider the contribution of our method is to enable timely monitoring of temporal changes through analysis of low resolution images time series only, and usage of

  1. Galileo's first images of Jupiter and the Galilean satellites

    Science.gov (United States)

    Belton, M.J.S.; Head, J. W.; Ingersoll, A.P.; Greeley, R.; McEwen, A.S.; Klaasen, K.P.; Senske, D.; Pappalardo, R.; Collins, G.; Vasavada, A.R.; Sullivan, R.; Simonelli, D.; Geissler, P.; Carr, M.H.; Davies, M.E.; Veverka, J.; Gierasch, P.J.; Banfield, D.; Bell, M.; Chapman, C.R.; Anger, C.; Greenberg, R.; Neukum, G.; Pilcher, C.B.; Beebe, R.F.; Burns, J.A.; Fanale, F.; Ip, W.; Johnson, T.V.; Morrison, D.; Moore, J.; Orton, G.S.; Thomas, P.; West, R.A.

    1996-01-01

    The first images of Jupiter, Io, Europa, and Ganymede from the Galileo spacecraft reveal new information about Jupiter's Great Red Spot (GRS) and the surfaces of the Galilean satellites. Features similar to clusters of thunderstorms were found in the GRS. Nearby wave structures suggest that the GRS may be a shallow atmospheric feature. Changes in surface color and plume distribution indicate differences in resurfacing processes near hot spots on lo. Patchy emissions were seen while Io was in eclipse by Jupiter. The outer margins of prominent linear markings (triple bands) on Europa are diffuse, suggesting that material has been vented from fractures. Numerous small circular craters indicate localized areas of relatively old surface. Pervasive brittle deformation of an ice layer appears to have formed grooves on Ganymede. Dark terrain unexpectedly shows distinctive albedo variations to the limit of resolution.

  2. Multi-Mode GF-3 Satellite Image Geometric Accuracy Verification Using the RPC Model.

    Science.gov (United States)

    Wang, Taoyang; Zhang, Guo; Yu, Lei; Zhao, Ruishan; Deng, Mingjun; Xu, Kai

    2017-09-01

    The GaoFen-3 (GF-3) satellite is the first C-band multi-polarization synthetic aperture radar (SAR) imaging satellite with a resolution up to 1 m in China. It is also the only SAR satellite of the High-Resolution Earth Observation System designed for civilian use. There are 12 different imaging models to meet the needs of different industry users. However, to use SAR satellite images for related applications, they must possess high geometric accuracy. In order to verify the geometric accuracy achieved by the different modes of GF-3 images, we analyze the SAR geometric error source and perform geometric correction tests based on the RPC model with and without ground control points (GCPs) for five imaging modes. These include the spotlight (SL), ultra-fine strip (UFS), Fine Strip I (FSI), Full polarized Strip I (QPSI), and standard strip (SS) modes. Experimental results show that the check point residuals are large and consistent without GCPs, but the root mean square error of the independent checkpoints for the case of four corner control points is better than 1.5 pixels, achieving a similar level of geometric positioning accuracy to that of international satellites. We conclude that the GF-3 satellite can be used for high-accuracy geometric processing and related industry applications.

  3. Vehicle Detection and Classification from High Resolution Satellite Images

    Science.gov (United States)

    Abraham, L.; Sasikumar, M.

    2014-11-01

    In the past decades satellite imagery has been used successfully for weather forecasting, geographical and geological applications. Low resolution satellite images are sufficient for these sorts of applications. But the technological developments in the field of satellite imaging provide high resolution sensors which expands its field of application. Thus the High Resolution Satellite Imagery (HRSI) proved to be a suitable alternative to aerial photogrammetric data to provide a new data source for object detection. Since the traffic rates in developing countries are enormously increasing, vehicle detection from satellite data will be a better choice for automating such systems. In this work, a novel technique for vehicle detection from the images obtained from high resolution sensors is proposed. Though we are using high resolution images, vehicles are seen only as tiny spots, difficult to distinguish from the background. But we are able to obtain a detection rate not less than 0.9. Thereafter we classify the detected vehicles into cars and trucks and find the count of them.

  4. Comparison of Satellite Image Enhancement Techniques in Wavelet Domain

    Directory of Open Access Journals (Sweden)

    K. Narasimhan

    2012-12-01

    Full Text Available In this study, a comparison of various existing satellite image resolution enhancement techniques in wavelet domain is done. Each method is analysed quantitatively and visually. There are various wavelet domain based methods such as Wavelet Zero Padding, Dual Tree-Complex Wavelet Transform, Discrete Wavelet Transform, Cycle Spinning and Undecimated Wavelet Transform. On the basis of analysis, the most efficient method is proposed. The algorithms take the low resolution image as the input image and then wavelet transformation using daubechies (db3 is used to decompose the input image into different sub band images containing high and low frequency component. Then these subband images along with the input image are interpolated followed by combining all these images to generate a new resolution enhanced image by an inverse process.

  5. Astronomers Make "Movie" of Radio Images Showing Supernova Explosion

    Science.gov (United States)

    1995-11-01

    Astronomers using an international network of radio telescopes have produced a "movie" showing details of the expansion of debris from an exploding star. Their sequence of images constitutes the best determination yet made of the details of a new supernova remnant, and already has raised new questions about such events. The scientists used radio telescopes in Europe and the United States, including the National Science Foundation's Very Large Array (VLA) and Very Long Baseline Array (VLBA), to make very high- resolution images of Supernova 1993J, which was discovered by a Spanish amateur astronomer on March 28, 1993 in the galaxy M81, some 11 million light-years distant in the constellation Ursa Major. Their results are reported in the December 1 issue of the journal Science. The "movie" is based on five images of the supernova, made during 1993 and 1994. The work was done by: Jon Marcaide and Eduardo Ros of the University of Valencia, Spain; Antxon Alberdi of the Special Laboratory for Astrophysics and Fundamental Physics of Madrid, Spain and the Institute of Astrophysics at Andalucia, Spain; Philip Diamond of the National Radio Astronomy Observatory in Socorro, NM; Irwin Shapiro of the Harvard-Smithsonian Center for Astrophysics in Cambridge, MA; Jose-Carlos Guirado, Dayton Jones and Robert Preston of the Jet Propulsion Laboratory in Pasadena, CA; Thomas Krichbaum and Arno Witzel of the Max-Planck Institute for Radioastronomy in Bonn, Germany; Franco Mantovani of the Institute of Radioastronomy in Bologna, Italy; Antonio Rius of the Special Laboratory for Astrophysics and Fundamental Physics of Madrid, Spain and the Center for Advanced Studies at Blanes, Spain; Richard Schilizzi of the Joint Institute for VLBI in Europe and Leiden Observatory in the Netherlands; Corrado Trigilio of the Institute of Radioastronomy in Noto, Italy; and Alan Whitney of the MIT- Haystack Observatory in Massachusetts. The capability to make such high-quality images with widely

  6. Satellite image analysis for surveillance, vegetation and climate change

    Energy Technology Data Exchange (ETDEWEB)

    Cai, D Michael [Los Alamos National Laboratory

    2011-01-18

    Recently, many studies have provided abundant evidence to show the trend of tree mortality is increasing in many regions, and the cause of tree mortality is associated with drought, insect outbreak, or fire. Unfortunately, there is no current capability available to monitor vegetation changes, and correlate and predict tree mortality with CO{sub 2} change, and climate change on the global scale. Different survey platforms (methods) have been used for forest management. Typical ground-based forest surveys measure tree stem diameter, species, and alive or dead. The measurements are low-tech and time consuming, but the sample sizes are large, running into millions of trees, covering large areas, and spanning many years. These field surveys provide powerful ground validation for other survey methods such as photo survey, helicopter GPS survey, and aerial overview survey. The satellite imagery has much larger coverage. It is easier to tile the different images together, and more important, the spatial resolution has been improved such that close to or even higher than aerial survey platforms. Today, the remote sensing satellite data have reached sub-meter spatial resolution for panchromatic channels (IKONOS 2: 1 m; Quickbird-2: 0.61 m; Worldview-2: 0.5 m) and meter spatial resolution for multi-spectral channels (IKONOS 2: 4 meter; Quickbird-2: 2.44 m; Worldview-2: 2 m). Therefore, high resolution satellite imagery can allow foresters to discern individual trees. This vital information should allow us to quantify physiological states of trees, e.g. healthy or dead, shape and size of tree crowns, as well as species and functional compositions of trees. This is a powerful data resource, however, due to the vast amount of the data collected daily, it is impossible for human analysts to review the imagery in detail to identify the vital biodiversity information. Thus, in this talk, we will discuss the opportunities and challenges to use high resolution satellite imagery and

  7. Classification of Pansharpened Urban Satellite Images

    DEFF Research Database (Denmark)

    Palsson, Frosti; Sveinsson, Johannes R.; Benediktsson, Jon Atli

    2012-01-01

    The classification of high resolution urban remote sensing imagery is addressed with the focus on classification of imagery that has been pansharpened by a number of different pansharpening methods. The pansharpening process introduces some spectral and spatial distortions in the resulting fused...... multispectral image, the amount of which highly varies depending on which pansharpening technique is used. In the majority of the pansharpening techniques that have been proposed, there is a compromise between the spatial enhancement and the spectral consistency. Here we study the effects of the spectral...... information from the panchromatic data. Random Forests (RF) and Support Vector Machines (SVM) will be used as classifiers. Experiments are done for three different datasets that have been obtained by two different imaging sensors, IKONOS and QuickBird. These sensors deliver multispectral images that have four...

  8. Autonomous Planetary 3-D Reconstruction From Satellite Images

    DEFF Research Database (Denmark)

    Denver, Troelz

    1999-01-01

    is discussed.Based on such features, 3-D representations may be compiled from two or more 2-D satellite images. The main purposes of such a mapping system are extraction of landing sites, objects of scientific interest and general planetary surveying. All data processing is performed autonomously onboard...

  9. Analytical models integrated with satellite images for optimized pest management

    Science.gov (United States)

    The global field protection (GFP) was developed to protect and optimize pest management resources integrating satellite images for precise field demarcation with physical models of controlled release devices of pesticides to protect large fields. The GFP was implemented using a graphical user interf...

  10. Interferometric Imaging of Geostationary Satellites: Signal-to-Noise Considerations

    Science.gov (United States)

    2011-09-01

    and the extent to which they cover the necessary portions of the UV plane . Once the photon counting noise becomes smaller than the UV coverage noise, ad...satellites,” in Proc. SPIE 4091, Imaging Technology and Telescopes, J. W. Bilbro, J. B. Breckinridge, R. A. Carreras , S. R. Czyzak, M. J. Eckart, R. D...SPIE 4091, Imaging Technology and Telescopes, J. W. Bilbro, J. B. Breckinridge, R. A. Carreras , S. R. Czyzak, M. J. Eckart, R. D. Fiete, and P. S

  11. 3-D Reconstruction From Satellite Images

    DEFF Research Database (Denmark)

    Denver, Troelz

    1999-01-01

    The aim of this project has been to implement a software system, that is able to create a 3-D reconstruction from two or more 2-D photographic images made from different positions. The height is determined from the disparity difference of the images. The general purpose of the system is mapping o......, where various methods have been tested in order to optimize the performance. The match results are used in the reconstruction part to establish a 3-D digital representation and finally, different presentation forms are discussed....

  12. The cradle of pyramids in satellite images

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    We propose the use of image processing to enhance the Google Maps of some archaeological areas of Egypt. In particular we analyse that place which is considered the cradle of pyramids, where it was announced the discovery of a new pyramid by means of an infrared remote sensing.

  13. An Image Matching Algorithm Integrating Global SRTM and Image Segmentation for Multi-Source Satellite Imagery

    Directory of Open Access Journals (Sweden)

    Xiao Ling

    2016-08-01

    Full Text Available This paper presents a novel image matching method for multi-source satellite images, which integrates global Shuttle Radar Topography Mission (SRTM data and image segmentation to achieve robust and numerous correspondences. This method first generates the epipolar lines as a geometric constraint assisted by global SRTM data, after which the seed points are selected and matched. To produce more reliable matching results, a region segmentation-based matching propagation is proposed in this paper, whereby the region segmentations are extracted by image segmentation and are considered to be a spatial constraint. Moreover, a similarity measure integrating Distance, Angle and Normalized Cross-Correlation (DANCC, which considers geometric similarity and radiometric similarity, is introduced to find the optimal correspondences. Experiments using typical satellite images acquired from Resources Satellite-3 (ZY-3, Mapping Satellite-1, SPOT-5 and Google Earth demonstrated that the proposed method is able to produce reliable and accurate matching results.

  14. Satellite images analysis for shadow detection and building height estimation

    Science.gov (United States)

    Liasis, Gregoris; Stavrou, Stavros

    2016-09-01

    Satellite images can provide valuable information about the presented urban landscape scenes to remote sensing and telecommunication applications. Obtaining information from satellite images is difficult since all the objects and their surroundings are presented with feature complexity. The shadows cast by buildings in urban scenes can be processed and used for estimating building heights. Thus, a robust and accurate building shadow detection process is important. Region-based active contour models can be used for satellite image segmentation. However, spectral heterogeneity that usually exists in satellite images and the feature similarity representing the shadow and several non-shadow regions makes building shadow detection challenging. In this work, a new automated method for delineating building shadows is proposed. Initially, spectral and spatial features of the satellite image are utilized for designing a custom filter to enhance shadows and reduce intensity heterogeneity. An effective iterative procedure using intensity differences is developed for tuning and subsequently selecting the most appropriate filter settings, able to highlight the building shadows. The response of the filter is then used for automatically estimating the radiometric property of the shadows. The customized filter and the radiometric feature are utilized to form an optimized active contour model where the contours are biased to delineate shadow regions. Post-processing morphological operations are also developed and applied for removing misleading artefacts. Finally, building heights are approximated using shadow length and the predefined or estimated solar elevation angle. Qualitative and quantitative measures are used for evaluating the performance of the proposed method for both shadow detection and building height estimation.

  15. Developing an efficient technique for satellite image denoising and resolution enhancement for improving classification accuracy

    Science.gov (United States)

    Thangaswamy, Sree Sharmila; Kadarkarai, Ramar; Thangaswamy, Sree Renga Raja

    2013-01-01

    Satellite images are corrupted by noise during image acquisition and transmission. The removal of noise from the image by attenuating the high-frequency image components removes important details as well. In order to retain the useful information, improve the visual appearance, and accurately classify an image, an effective denoising technique is required. We discuss three important steps such as image denoising, resolution enhancement, and classification for improving accuracy in a noisy image. An effective denoising technique, hybrid directional lifting, is proposed to retain the important details of the images and improve visual appearance. The discrete wavelet transform based interpolation is developed for enhancing the resolution of the denoised image. The image is then classified using a support vector machine, which is superior to other neural network classifiers. The quantitative performance measures such as peak signal to noise ratio and classification accuracy show the significance of the proposed techniques.

  16. Identification of geostationary satellites using polarization data from unresolved images

    Science.gov (United States)

    Speicher, Andy

    In order to protect critical military and commercial space assets, the United States Space Surveillance Network must have the ability to positively identify and characterize all space objects. Unfortunately, positive identification and characterization of space objects is a manual and labor intensive process today since even large telescopes cannot provide resolved images of most space objects. Since resolved images of geosynchronous satellites are not technically feasible with current technology, another method of distinguishing space objects was explored that exploits the polarization signature from unresolved images. The objective of this study was to collect and analyze visible-spectrum polarization data from unresolved images of geosynchronous satellites taken over various solar phase angles. Different collection geometries were used to evaluate the polarization contribution of solar arrays, thermal control materials, antennas, and the satellite bus as the solar phase angle changed. Since materials on space objects age due to the space environment, it was postulated that their polarization signature may change enough to allow discrimination of identical satellites launched at different times. The instrumentation used in this experiment was a United States Air Force Academy (USAFA) Department of Physics system that consists of a 20-inch Ritchey-Chretien telescope and a dual focal plane optical train fed with a polarizing beam splitter. A rigorous calibration of the system was performed that included corrections for pixel bias, dark current, and response. Additionally, the two channel polarimeter was calibrated by experimentally determining the Mueller matrix for the system and relating image intensity at the two cameras to Stokes parameters S0 and S1. After the system calibration, polarization data was collected during three nights on eight geosynchronous satellites built by various manufacturers and launched several years apart. Three pairs of the eight

  17. Convolutional neural network features based change detection in satellite images

    Science.gov (United States)

    Mohammed El Amin, Arabi; Liu, Qingjie; Wang, Yunhong

    2016-07-01

    With the popular use of high resolution remote sensing (HRRS) satellite images, a huge research efforts have been placed on change detection (CD) problem. An effective feature selection method can significantly boost the final result. While hand-designed features have proven difficulties to design features that effectively capture high and mid-level representations, the recent developments in machine learning (Deep Learning) omit this problem by learning hierarchical representation in an unsupervised manner directly from data without human intervention. In this letter, we propose approaching the change detection problem from a feature learning perspective. A novel deep Convolutional Neural Networks (CNN) features based HR satellite images change detection method is proposed. The main guideline is to produce a change detection map directly from two images using a pretrained CNN. This method can omit the limited performance of hand-crafted features. Firstly, CNN features are extracted through different convolutional layers. Then, a concatenation step is evaluated after an normalization step, resulting in a unique higher dimensional feature map. Finally, a change map was computed using pixel-wise Euclidean distance. Our method has been validated on real bitemporal HRRS satellite images according to qualitative and quantitative analyses. The results obtained confirm the interest of the proposed method.

  18. Using Satellite Images for Wireless Network Planing in Baku City

    Science.gov (United States)

    Gojamanov, M.; Ismayilov, J.

    2013-04-01

    It is a well known fact that the Information-Telecommunication and Space research technologies are the fields getting much more benefits from the achievements of the scientific and technical progress. In many cases, these areas supporting each other have improved the conditions for their further development. For instance, the intensive development in the field of the mobile communication has caused the rapid progress of the Space research technologies and vice versa.Today it is impossible to solve one of the most important tasks of the mobile communication as Radio Frecance planning without the 2D and 3D digital maps. The compiling of such maps is much more efficient by means of the space images. Because the quality of the space images has been improved and developed, especially at the both spectral and spatial resolution points. It has been possible to to use 8 Band images with the spatial resolution of 50 sm. At present, in relation to the function 3G of mobile communications one of the main issues facing mobile operator companies is a high-precision 3D digital maps. It should be noted that the number of mobile phone users in the Republic of Azerbaijan went forward other Community of Independent States Countries. Of course, using of aerial images for 3D mapping would be optimal. However, depending on a number of technical and administrative problems aerial photography cannot be used. Therefore, the experience of many countries shows that it will be more effective to use the space images with the higher resolution for these issues. Concerning the fact that the mobile communication within the city of Baku has included 3G function there were ordered stereo images wih the spatial resolution of 50 cm for the 150 sq.km territory occupying the central part of the city in order to compile 3D digital maps. The images collected from the WorldView-2 satellite are 4-Band Bundle(Pan+MS1) stereo images. Such kind of imagery enable to automatically classificate some required

  19. Attitude motion compensation for imager on Fengyun-4 geostationary meteorological satellite

    Science.gov (United States)

    Lyu, Wang; Dai, Shoulun; Dong, Yaohai; Shen, Yili; Song, Xiaozheng; Wang, Tianshu

    2017-09-01

    A compensation method is used in Chinese Fengyun-4 satellite to counteracting the line-of-sight influence by attitude motion during imaging. The method is acted on-board by adding the compensation amount to the instrument scanning control circuit. The mathematics simulation and the three-axis air-bearing test results show that the method works effectively.

  20. Vegetation Cover Change in Yellowstone National Park Detected Using Landsat Satellite Image Analysis

    Science.gov (United States)

    Potter, Christopher S.

    2015-01-01

    Results from Landsat satellite image analysis since 1987 in all unburned areas (since the 1880s) of Yellowstone National Park (YNP) showed that consistent decreases in the normalized difference vegetation index (NDVI) have been strongly dependent on periodic variations in peak annual snow water equivalents (SWE).

  1. High-Resolution Imaging of Asteroids/Satellites with AO

    Science.gov (United States)

    Merline, William

    2012-02-01

    We propose to make high-resolution observations of asteroids using AO, to measure size, shape, and pole position (spin vectors), and/or to search for satellites. We have demonstrated that AO imaging allows determination of the pole/dimensions in 1 or 2 nights on a single target, rather than the years of observations with lightcurve inversion techniques that only yield poles and axial ratios, not true dimensions. Our new technique (KOALA) combines AO imaging with lightcurve and occultation data for optimum size/shape determinations. We request that LGS be available for faint targets, but using NGS AO, we will measure several large and intermediate asteroids that are favorably placed in spring/summer of 2012 for size/shape/pole. Accurately determining the volume from the often-irregular shape allows us to derive densities to much greater precision in cases where the mass is known, e.g., from the presence of a satellite. We will search several d! ozen asteroids for the presence of satellites, particularly in under-studied populations, particularly NEOs (we have recently achieved the first-ever optical image of an NEO binary [Merline et al. 2008b, IAUC 8977]). Satellites provide a real-life lab for testing collisional models. We will search for satellites around special objects at the request of lightcurve observers, and we will make a search for debris in the vicinity of Pluto, in support of the New Horizons mission. Our shape/size work requires observations over most of a full rotation period (typically several hours).

  2. Spacecraft design project: High temperature superconducting infrared imaging satellite

    Science.gov (United States)

    1991-01-01

    The High Temperature Superconductor Infrared Imaging Satellite (HTSCIRIS) is designed to perform the space based infrared imaging and surveillance mission. The design of the satellite follows the black box approach. The payload is a stand alone unit, with the spacecraft bus designed to meet the requirements of the payload as listed in the statement of work. Specifications influencing the design of the spacecraft bus were originated by the Naval Research Lab. A description of the following systems is included: spacecraft configuration, orbital dynamics, radio frequency communication subsystem, electrical power system, propulsion, attitude control system, thermal control, and structural design. The issues of testing and cost analysis are also addressed. This design project was part of the course Advanced Spacecraft Design taught at the Naval Postgraduate School.

  3. The SUMO Ship Detector Algorithm for Satellite Radar Images

    Directory of Open Access Journals (Sweden)

    Harm Greidanus

    2017-03-01

    Full Text Available Search for Unidentified Maritime Objects (SUMO is an algorithm for ship detection in satellite Synthetic Aperture Radar (SAR images. It has been developed over the course of more than 15 years, using a large amount of SAR images from almost all available SAR satellites operating in L-, C- and X-band. As validated by benchmark tests, it performs very well on a wide range of SAR image modes (from Spotlight to ScanSAR and resolutions (from 1–100 m and for all types and sizes of ships, within the physical limits imposed by the radar imaging. This paper describes, in detail, the algorithmic approach in all of the steps of the ship detection: land masking, clutter estimation, detection thresholding, target clustering, ship attribute estimation and false alarm suppression. SUMO is a pixel-based CFAR (Constant False Alarm Rate detector for multi-look radar images. It assumes a K distribution for the sea clutter, corrected however for deviations of the actual sea clutter from this distribution, implementing a fast and robust method for the clutter background estimation. The clustering of detected pixels into targets (ships uses several thresholds to deal with the typically irregular distribution of the radar backscatter over a ship. In a multi-polarization image, the different channels are fused. Azimuth ambiguities, a common source of false alarms in ship detection, are removed. A reliability indicator is computed for each target. In post-processing, using the results of a series of images, additional false alarms from recurrent (fixed targets including range ambiguities are also removed. SUMO can run in semi-automatic mode, where an operator can verify each detected target. It can also run in fully automatic mode, where batches of over 10,000 images have successfully been processed in less than two hours. The number of satellite SAR systems keeps increasing, as does their application to maritime surveillance. The open data policy of the EU

  4. METEOROLOGICAL SATELLITE IMAGES IN GEOGRAPHY CLASSES: a didactic possibility

    Directory of Open Access Journals (Sweden)

    Diego Correia Maia

    2016-01-01

    Full Text Available ABSTRACT: The satellite images are still largely unexplored as didactic resource in geography classes, particularly about meteorology. This article aims to contribute to the development of new methodologies of interpretation and understanding, beyond the construction of pedagogical practices involving meteorological satellite images, concepts and issues related to climate issues. The aim of this paper is to present possibilities for the use of meteorological satellite images in the Teaching of Geography, aiming the promoting and the understanding of contents of air masses and fronts and climatic factors. RESUMO: As imagens de satélite ainda são pouco exploradas como recurso didático nas aulas de Geografia, principalmente aquelas relativas à meteorologia. Este artigo visa contribuir com o desenvolvimento de novas metodologias de interpretação e compreensão, além da construção de práticas pedagógicas envolvendo imagens de satélite meteorológico, conceitos e temas ligados às questões climáticas. Seu objetivo é apresentar possibilidades de utilização das imagens de satélite meteorológico no Ensino de Geografia, visando à promoção e ao entendimento dos conteúdos de massas de ar e frentes e de elementos climáticos. Palavras chave

  5. A fast and automatic mosaic method for high-resolution satellite images

    Science.gov (United States)

    Chen, Hongshun; He, Hui; Xiao, Hongyu; Huang, Jing

    2015-12-01

    We proposed a fast and fully automatic mosaic method for high-resolution satellite images. First, the overlapped rectangle is computed according to geographical locations of the reference and mosaic images and feature points on both the reference and mosaic images are extracted by a scale-invariant feature transform (SIFT) algorithm only from the overlapped region. Then, the RANSAC method is used to match feature points of both images. Finally, the two images are fused into a seamlessly panoramic image by the simple linear weighted fusion method or other method. The proposed method is implemented in C++ language based on OpenCV and GDAL, and tested by Worldview-2 multispectral images with a spatial resolution of 2 meters. Results show that the proposed method can detect feature points efficiently and mosaic images automatically.

  6. Effect of satellite formations and imaging modes on global albedo estimation

    Science.gov (United States)

    Nag, Sreeja; Gatebe, Charles K.; Miller, David W.; de Weck, Olivier L.

    2016-05-01

    We confirm the applicability of using small satellite formation flight for multi-angular earth observation to retrieve global, narrow band, narrow field-of-view albedo. The value of formation flight is assessed using a coupled systems engineering and science evaluation model, driven by Model Based Systems Engineering and Observing System Simulation Experiments. Albedo errors are calculated against bi-directional reflectance data obtained from NASA airborne campaigns made by the Cloud Absorption Radiometer for the seven major surface types, binned using MODIS' land cover map - water, forest, cropland, grassland, snow, desert and cities. A full tradespace of architectures with three to eight satellites, maintainable orbits and imaging modes (collective payload pointing strategies) are assessed. For an arbitrary 4-sat formation, changing the reference, nadir-pointing satellite dynamically reduces the average albedo error to 0.003, from 0.006 found in the static referencecase. Tracking pre-selected waypoints with all the satellites reduces the average error further to 0.001, allows better polar imaging and continued operations even with a broken formation. An albedo error of 0.001 translates to 1.36 W/m2 or 0.4% in Earth's outgoing radiation error. Estimation errors are found to be independent of the satellites' altitude and inclination, if the nadir-looking is changed dynamically. The formation satellites are restricted to differ in only right ascension of planes and mean anomalies within slotted bounds. Three satellites in some specific formations show average albedo errors of less than 2% with respect to airborne, ground data and seven satellites in any slotted formation outperform the monolithic error of 3.6%. In fact, the maximum possible albedo error, purely based on angular sampling, of 12% for monoliths is outperformed by a five-satellite formation in any slotted arrangement and an eight satellite formation can bring that error down four fold to 3%. More than

  7. Science means business: medical imaging shows colour of money

    CERN Multimedia

    Macfie, Rebecca

    2007-01-01

    Doctors have used x-ray machines for 100 years, but they remain an imprecise and limited diagnostic tool. But a team of Canterbury University researchers is aiming to revolutionise medical x-ray technology with high-precision colour imaging. (1,5 page)

  8. Three attempts of earthquake prediction with satellite cloud images

    Directory of Open Access Journals (Sweden)

    G. Guangmeng

    2013-01-01

    Full Text Available Thermal anomalies detected from satellite data are widely reported. Nearly all the anomalies are reported after the quake. Here we report three earthquake predictions in Italy and Iran according to satellite cloud anomalies. These cloud anomalies usually show a linear pattern, stay there for hours and do not move with winds. According to these anomalies, we can give a rough estimation about impending earthquake activities. All the estimated dates and magnitudes are in good agreement with the earthquake facts, and the only unsatisfactory point is that the distance error is 100–300 km. Because the cloud anomaly is long, we can not reduce the distance error further. A possible way is to combine geophysical data and satellite data together to estimate the epicenter and this will increase the prediction accuracy.

  9. Analysis of Galileo Style Geostationary Satellite Imaging: Image Reconstruction

    Science.gov (United States)

    2012-09-01

    obtained using only baselines longer than 8 m does not sample the short spacial frequencies, and the image reconstruction is not able to recover the...the long spacial frequencies sampled in a shorter baseline overlap the short spacial frequencies sampled in a longer baseline. This technique will

  10. The predictable narwhal: satellite tracking shows behavioural similarities between isolated subpopulations

    DEFF Research Database (Denmark)

    Heide-Jørgensen, M. P.; Nielsen, N.H.; Hansen, R. G.;

    2015-01-01

    Comparison of behavioural similarities between subpopulations of species that have been isolated for a long time is important for understanding the general ecology of species that are under pressure from large-scale changes in habitats. Narwhals (Monodon monoceros) east and west of Greenland...... are examples of separated populations that, in different ocean parts, will be coping with similar anthropogenic and climate-driven habitat alterations. To study this, 28 narwhals from the Scoresby Sound fjord system were tracked by satellite in 2010-2013. The average duration of contact with the whales was 124...

  11. Thermal precursors in satellite images of the 1999 eruption of Shishaldin Volcano

    Science.gov (United States)

    Dehn, Jonathan; Dean, Kenneson; Engle, Kevin; Izbekov, Pavel

    2002-07-01

    Shishaldin Volcano, Unimak Island Alaska, began showing signs of thermal unrest in satellite images on 9 February 1999. A thermal anomaly and small steam plume were detected at the summit of the volcano in short-wave thermal infrared AVHRR (advanced very high resolution radiometer) satellite data. This was followed by over 2 months of changes in the observed thermal character of the volcano. Initially, the thermal anomaly was only visible when the satellite passed nearly directly over the volcano, suggesting a hot source deep in the central crater obscured from more oblique satellite passes. The "zenith angle" needed to see the anomaly increased with time, presumably as the thermal source rose within the conduit. Based on this change, an ascent rate of ca. 14 m per day for the thermal source was estimated, until it reached the summit on around 21 March. It is thought that Strombolian activity began around this time. The precursory activity culminated in a sub-Plinian eruption on 19 April, ejecting ash to over 45,000 ft. (13,700 m). The thermal energy output through the precursory period was calculated based on geometric constraints unique to Shishaldin. These calculations show fluctuations that can be tied to changes in the eruptive character inferred from seismic records and later geologic studies. The remote location of this volcano made satellite images a necessary observation tool for this eruption. To date, this is the longest thermal precursory activity preceding a sub-Plinian eruption recorded by satellite images in the region. This type of thermal monitoring of remote volcanoes is central in the efforts of the Alaska Volcano Observatory to provide timely warnings of volcanic eruption, and mitigate their associated hazards to air-traffic and local residents.

  12. NNIC—neural network image compressor for satellite positioning system

    Science.gov (United States)

    Danchenko, Pavel; Lifshits, Feodor; Orion, Itzhak; Koren, Sion; Solomon, Alan D.; Mark, Shlomo

    2007-04-01

    We have developed an algorithm, based on novel techniques of data compression and neural networks for the optimal positioning of a satellite. The algorithm is described in detail, and examples of its application are given. The heart of this algorithm is the program NNIC—neural network image compressor. This program was developed for compression color and grayscale images with artificial neural networks (ANNs). NNIC applies three different methods for compression. Two of them are based on neural networks architectures—multilayer perceptron and kohonen network. The third is based on a widely used method of discrete cosine transform, the basis for the JPEG standard. The program also serves as a tool for determining numerical and visual quality parameters of compression and comparison between different methods. A number of advantages and disadvantages of the compression using ANNs were discovered in the course of the present research, some of them presented in this report. The thrust of the report is the discussion of ANNs implementation problems for modern platforms, such as a satellite positioning system that include intensive image flowing and processing.

  13. Improving Sediment Transport Prediction by Assimilating Satellite Images in a Tidal Bay Model of Hong Kong

    Directory of Open Access Journals (Sweden)

    Peng Zhang

    2014-03-01

    Full Text Available Numerical models being one of the major tools for sediment dynamic studies in complex coastal waters are now benefitting from remote sensing images that are easily available for model inputs. The present study explored various methods of integrating remote sensing ocean color data into a numerical model to improve sediment transport prediction in a tide-dominated bay in Hong Kong, Deep Bay. Two sea surface sediment datasets delineated from satellite images from the Moderate Resolution Imaging Spectra-radiometer (MODIS were assimilated into a coastal ocean model of the bay for one tidal cycle. It was found that remote sensing sediment information enhanced the sediment transport model ability by validating the model results with in situ measurements. Model results showed that root mean square errors of forecast sediment both at the surface layer and the vertical layers from the model with satellite sediment assimilation are reduced by at least 36% over the model without assimilation.

  14. An entropy-based approach to automatic image segmentation of satellite images

    CERN Document Server

    Barbieri, A L; Rodrigues, F A; Bruno, O M; Costa, L da F

    2009-01-01

    An entropy-based image segmentation approach is introduced and applied to color images obtained from Google Earth. Segmentation refers to the process of partitioning a digital image in order to locate different objects and regions of interest. The application to satellite images paves the way to automated monitoring of ecological catastrophes, urban growth, agricultural activity, maritime pollution, climate changing and general surveillance. Regions representing aquatic, rural and urban areas are identified and the accuracy of the proposed segmentation methodology is evaluated. The comparison with gray level images revealed that the color information is fundamental to obtain an accurate segmentation.

  15. Image Processing Technique for Automatic Detection of Satellite Streaks

    Science.gov (United States)

    2007-02-01

    satellites actifs et d’autres débris doivent être contrôlées. Dans ces cas, les paramètres orbitaux sont connus, mais après un certain temps cette...artéfacts de capteur (tel que des pixels morts, gradient de fond, bruit) et dégradation du signal (coulage, éblouissement, saturation, etc...Cette étude explique comment les artéfacts du capteur peuvent être corrigés, le fond de l’image enlevé et le bruit partiellement effacé. Puis, elle

  16. Landsat TM and ETM+ 2002-2003 Kansas Satellite Image Database (KSID)

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Satellite Image Database (KSID):2002-2003 consists of image data gathered by three sensors. The first image data are terrain-corrected, precision...

  17. Automatic Detection of Clouds and Shadows Using High Resolution Satellite Image Time Series

    Science.gov (United States)

    Champion, Nicolas

    2016-06-01

    éiades-HR images and our first experiments show the feasibility to automate the detection of shadows and clouds in satellite image sequences.

  18. Cuckoo search algorithm based satellite image contrast and brightness enhancement using DWT-SVD.

    Science.gov (United States)

    Bhandari, A K; Soni, V; Kumar, A; Singh, G K

    2014-07-01

    This paper presents a new contrast enhancement approach which is based on Cuckoo Search (CS) algorithm and DWT-SVD for quality improvement of the low contrast satellite images. The input image is decomposed into the four frequency subbands through Discrete Wavelet Transform (DWT), and CS algorithm used to optimize each subband of DWT and then obtains the singular value matrix of the low-low thresholded subband image and finally, it reconstructs the enhanced image by applying IDWT. The singular value matrix employed intensity information of the particular image, and any modification in the singular values changes the intensity of the given image. The experimental results show superiority of the proposed method performance in terms of PSNR, MSE, Mean and Standard Deviation over conventional and state-of-the-art techniques. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  19. A low cost thermal infrared hyperspectral imager for small satellites

    Science.gov (United States)

    Crites, S. T.; Lucey, P. G.; Wright, R.; Garbeil, H.; Horton, K. A.

    2011-06-01

    The traditional model for space-based earth observations involves long mission times, high cost, and long development time. Because of the significant time and monetary investment required, riskier instrument development missions or those with very specific scientific goals are unlikely to successfully obtain funding. However, a niche for earth observations exploiting new technologies in focused, short lifetime missions is opening with the growth of the small satellite market and launch opportunities for these satellites. These low-cost, short-lived missions provide an experimental platform for testing new sensor technologies that may transition to larger, more long-lived platforms. The low costs and short lifetimes also increase acceptable risk to sensors, enabling large decreases in cost using commercial off the shelf (COTS) parts and allowing early-career scientists and engineers to gain experience with these projects. We are building a low-cost long-wave infrared spectral sensor, funded by the NASA Experimental Project to Stimulate Competitive Research program (EPSCOR), to demonstrate the ways in which a university's scientific and instrument development programs can fit into this niche. The sensor is a low-mass, power efficient thermal hyperspectral imager with electronics contained in a pressure vessel to enable the use of COTS electronics, and will be compatible with small satellite platforms. The sensor, called Thermal Hyperspectral Imager (THI), is based on a Sagnac interferometer and uses an uncooled 320x256 microbolometer array. The sensor will collect calibrated radiance data at long-wave infrared (LWIR, 8-14 microns) wavelengths in 230-meter pixels with 20 wavenumber spectral resolution from a 400-km orbit.

  20. A low cost thermal infrared hyperspectral imager for small satellites

    Science.gov (United States)

    Crites, S. T.; Lucey, P. G.; Wright, R.; Garbeil, H.; Horton, K. A.; Wood, M.

    2012-06-01

    The growth of the small satellite market and launch opportunities for these satellites is creating a new niche for earth observations that contrasts with the long mission durations, high costs, and long development times associated with traditional space-based earth observations. Low-cost, short-lived missions made possible by this new approach provide an experimental platform for testing new sensor technologies that may transition to larger, more long-lived platforms. The low costs and short lifetimes also increase acceptable risk to sensors, enabling large decreases in cost using commercial off-the-shelf (COTS) parts and allowing early-career scientists and engineers to gain experience with these projects. We are building a low-cost long-wave infrared spectral sensor, funded by the NASA Experimental Project to Stimulate Competitive Research program (EPSCoR), to demonstrate ways in which a university's scientific and instrument development programs can fit into this niche. The sensor is a low-mass, power-efficient thermal hyperspectral imager with electronics contained in a pressure vessel to enable use of COTS electronics and will be compatible with small satellite platforms. The sensor, called Thermal Hyperspectral Imager (THI), is based on a Sagnac interferometer and uses an uncooled 320x256 microbolometer array. The sensor will collect calibrated radiance data at long-wave infrared (LWIR, 8-14 microns) wavelengths in 230 meter pixels with 20 wavenumber spectral resolution from a 400 km orbit. We are currently in the laboratory and airborne testing stage in order to demonstrate the spectro-radiometric quality of data that the instrument provides.

  1. Investigation of Interpolation for Solar Irradiation in Non-Observed Point Based on Satellite Images

    Science.gov (United States)

    Shinoda, Yukio; Fujisawa, Sei; Seki, Tomomichi

    Penetrating the Photovoltaic Power Generation System (PV) on an enormous scale over a next decade has some crucial problems which affect on, for example, power grid stabilization and operation including existing power stations for electric power utilities. It would be therefore important for future operation to estimate power output generated by PV in advance. We focus on interpolation using observed solar irradiation (SI) and brightness of pixel on a satellite visible image for estimating SI even in non-observed point. Our results by single regression analysis between observed SI and brightness on a satellite image as cloudiness show that a shift of highest determination coefficient on each hour would represent solar movement and this higher determination coefficient would indicate a position which SI and cloud would cross. Finally assessment of error in this interpolation shows enough accuracy at least in daytime period, which is important for electricity utilities.

  2. Application of Geostatistical Simulation to Enhance Satellite Image Products

    Science.gov (United States)

    Hlavka, Christine A.; Dungan, Jennifer L.; Thirulanambi, Rajkumar; Roy, David

    2004-01-01

    With the deployment of Earth Observing System (EOS) satellites that provide daily, global imagery, there is increasing interest in defining the limitations of the data and derived products due to its coarse spatial resolution. Much of the detail, i.e. small fragments and notches in boundaries, is lost with coarse resolution imagery such as the EOS MODerate-Resolution Imaging Spectroradiometer (MODIS) data. Higher spatial resolution data such as the EOS Advanced Spaceborn Thermal Emission and Reflection Radiometer (ASTER), Landsat and airborne sensor imagery provide more detailed information but are less frequently available. There are, however, both theoretical and analytical evidence that burn scars and other fragmented types of land covers form self-similar or self-affine patterns, that is, patterns that look similar when viewed at widely differing spatial scales. Therefore small features of the patterns should be predictable, at least in a statistical sense, with knowledge about the large features. Recent developments in fractal modeling for characterizing the spatial distribution of undiscovered petroleum deposits are thus applicable to generating simulations of finer resolution satellite image products. We will present example EOS products, analysis to investigate self-similarity, and simulation results.

  3. Airport runway detection in satellite images by Adaboost learning

    Science.gov (United States)

    Zongur, Ugur; Halici, Ugur; Aytekin, Orsan; Ulusoy, Ilkay

    2009-09-01

    Advances in hardware and pattern recognition techniques, along with the widespread utilization of remote sensing satellites, have urged the development of automatic target detection systems in satellite images. Automatic detection of airports is particularly essential, due to the strategic importance of these targets. In this paper, a runway detection method using a segmentation process based on textural properties is proposed for the detection of airport runways, which is the most distinguishing element of an airport. Several local textural features are extracted including not only low level features such as mean, standard deviation of image intensity and gradient, but also Zernike Moments, Circular-Mellin Features, Haralick Features, as well as features involving Gabor Filters, Wavelets and Fourier Power Spectrum Analysis. Since the subset of the mentioned features, which have a role in the discrimination of airport runways from other structures and landforms, cannot be predicted trivially, Adaboost learning algorithm is employed for both classification and determining the feature subset, due to its feature selector nature. By means of the features chosen in this way, a coarse representation of possible runway locations is obtained. Promising experimental results are achieved and given.

  4. Use of satellite images for the monitoring of water systems

    Science.gov (United States)

    Hillebrand, Gudrun; Winterscheid, Axel; Baschek, Björn; Wolf, Thomas

    2015-04-01

    Satellite images are a proven source of information for monitoring ecological indicators in coastal waters and inland river systems. This potential of remote sensing products was demonstrated by recent research projects (e.g. EU-funded project Freshmon - www.freshmon.eu) and other activities by national institutions. Among indicators for water quality, a particular focus was set on the temporal and spatial dynamics of suspended particulate matter (SPM) and Chlorophyll-a (Chl-a). The German Federal Institute of Hydrology (BfG) was using the Weser and Elbe estuaries as test cases to compare in-situ measurements with results obtained from a temporal series of automatically generated maps of SPM distributions based on remote sensing data. Maps of SPM and Chl-a distributions in European inland rivers and alpine lakes were generated by the Freshmon Project. Earth observation based products are a valuable source for additional data that can well supplement in-situ monitoring. For 2015, the BfG and the Institute for Lake Research of the State Institute for the Environment, Measurements and Nature Conservation of Baden-Wuerttemberg, Germany (LUBW) are in the process to start implementing an operational service for monitoring SPM and Chl-a based on satellite images (Landsat 7 & 8, Sentinel 2, and if required other systems with higher spatial resolution, e.g. Rapid Eye). In this 2-years project, which is part of the European Copernicus Programme, the operational service will be set up for - the inland rivers of Rhine and Elbe - the North Sea estuaries of Elbe, Weser and Ems. Furthermore - Lake Constance and other lakes located within the Federal State of Baden-Wuerttemberg. In future, the service can be implemented for other rivers and lakes as well. Key feature of the project is a data base that holds the stock of geo-referenced maps of SPM and Chl-a distributions. Via web-based portals (e.g. GGInA - geo-portal of the BfG; UIS - environmental information system of the

  5. Spatial, Temporal and Spectral Satellite Image Fusion via Sparse Representation

    Science.gov (United States)

    Song, Huihui

    Remote sensing provides good measurements for monitoring and further analyzing the climate change, dynamics of ecosystem, and human activities in global or regional scales. Over the past two decades, the number of launched satellite sensors has been increasing with the development of aerospace technologies and the growing requirements on remote sensing data in a vast amount of application fields. However, a key technological challenge confronting these sensors is that they tradeoff between spatial resolution and other properties, including temporal resolution, spectral resolution, swath width, etc., due to the limitations of hardware technology and budget constraints. To increase the spatial resolution of data with other good properties, one possible cost-effective solution is to explore data integration methods that can fuse multi-resolution data from multiple sensors, thereby enhancing the application capabilities of available remote sensing data. In this thesis, we propose to fuse the spatial resolution with temporal resolution and spectral resolution, respectively, based on sparse representation theory. Taking the study case of Landsat ETM+ (with spatial resolution of 30m and temporal resolution of 16 days) and MODIS (with spatial resolution of 250m ~ 1km and daily temporal resolution) reflectance, we propose two spatial-temporal fusion methods to combine the fine spatial information of Landsat image and the daily temporal resolution of MODIS image. Motivated by that the images from these two sensors are comparable on corresponding bands, we propose to link their spatial information on available Landsat- MODIS image pair (captured on prior date) and then predict the Landsat image from the MODIS counterpart on prediction date. To well-learn the spatial details from the prior images, we use a redundant dictionary to extract the basic representation atoms for both Landsat and MODIS images based on sparse representation. Under the scenario of two prior Landsat

  6. CLOUD DETECTION OF OPTICAL SATELLITE IMAGES USING SUPPORT VECTOR MACHINE

    Directory of Open Access Journals (Sweden)

    K.-Y. Lee

    2016-06-01

    Full Text Available Cloud covers are generally present in optical remote-sensing images, which limit the usage of acquired images and increase the difficulty of data analysis, such as image compositing, correction of atmosphere effects, calculations of vegetation induces, land cover classification, and land cover change detection. In previous studies, thresholding is a common and useful method in cloud detection. However, a selected threshold is usually suitable for certain cases or local study areas, and it may be failed in other cases. In other words, thresholding-based methods are data-sensitive. Besides, there are many exceptions to control, and the environment is changed dynamically. Using the same threshold value on various data is not effective. In this study, a threshold-free method based on Support Vector Machine (SVM is proposed, which can avoid the abovementioned problems. A statistical model is adopted to detect clouds instead of a subjective thresholding-based method, which is the main idea of this study. The features used in a classifier is the key to a successful classification. As a result, Automatic Cloud Cover Assessment (ACCA algorithm, which is based on physical characteristics of clouds, is used to distinguish the clouds and other objects. In the same way, the algorithm called Fmask (Zhu et al., 2012 uses a lot of thresholds and criteria to screen clouds, cloud shadows, and snow. Therefore, the algorithm of feature extraction is based on the ACCA algorithm and Fmask. Spatial and temporal information are also important for satellite images. Consequently, co-occurrence matrix and temporal variance with uniformity of the major principal axis are used in proposed method. We aim to classify images into three groups: cloud, non-cloud and the others. In experiments, images acquired by the Landsat 7 Enhanced Thematic Mapper Plus (ETM+ and images containing the landscapes of agriculture, snow area, and island are tested. Experiment results demonstrate

  7. Cloud Detection of Optical Satellite Images Using Support Vector Machine

    Science.gov (United States)

    Lee, Kuan-Yi; Lin, Chao-Hung

    2016-06-01

    Cloud covers are generally present in optical remote-sensing images, which limit the usage of acquired images and increase the difficulty of data analysis, such as image compositing, correction of atmosphere effects, calculations of vegetation induces, land cover classification, and land cover change detection. In previous studies, thresholding is a common and useful method in cloud detection. However, a selected threshold is usually suitable for certain cases or local study areas, and it may be failed in other cases. In other words, thresholding-based methods are data-sensitive. Besides, there are many exceptions to control, and the environment is changed dynamically. Using the same threshold value on various data is not effective. In this study, a threshold-free method based on Support Vector Machine (SVM) is proposed, which can avoid the abovementioned problems. A statistical model is adopted to detect clouds instead of a subjective thresholding-based method, which is the main idea of this study. The features used in a classifier is the key to a successful classification. As a result, Automatic Cloud Cover Assessment (ACCA) algorithm, which is based on physical characteristics of clouds, is used to distinguish the clouds and other objects. In the same way, the algorithm called Fmask (Zhu et al., 2012) uses a lot of thresholds and criteria to screen clouds, cloud shadows, and snow. Therefore, the algorithm of feature extraction is based on the ACCA algorithm and Fmask. Spatial and temporal information are also important for satellite images. Consequently, co-occurrence matrix and temporal variance with uniformity of the major principal axis are used in proposed method. We aim to classify images into three groups: cloud, non-cloud and the others. In experiments, images acquired by the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and images containing the landscapes of agriculture, snow area, and island are tested. Experiment results demonstrate the detection

  8. Parallel algorithms of relative radiometric correction for images of TH-1 satellite

    Science.gov (United States)

    Wang, Xiang; Zhang, Tingtao; Cheng, Jiasheng; Yang, Tao

    2014-05-01

    are written by parallelizing the serial version. Numerical results show that, the parallel algorithms proposed in this article can effectively bring up the processing speed of RRC for high resolution images of TH-1 Satellite, and, with its stable running and excellent image processing, meet the need of application. For three kinds of images, such as images with large amount of cloud, with little differences of ground features, and with good climate and plentiful ground features, the average acceleration rates could reach 2.484, 2.539 and 4.159 respectively.

  9. Building damage scale proposal from VHR satellite image

    Science.gov (United States)

    Sandu, Constantin; Giulio Tonolo, Fabio; Cotrufo, Silvana; Boccardo, Piero

    2017-04-01

    Natural hazards have a huge impact in terms of economic losses, affected and killed people. Current exploitation of remote sensed images play a fundamental role in the delineation of damages generated by catastrophic events. Institutions like the United Nations and the European Commission designed services that provide information about the impact of disasters rapidly. One of the approach currently used to carry out the damage assessment is based on very high resolution remote sensing imagery (including both aerial and satellite platforms). One of the main focus of the responders, especially in case of events like earthquakes, is on buildings and infrastructures. As far as the buildings are concerned, to date international standard guidelines that provide essential information on how to assess building damages using VHR images still does not exist. The aim of this study is to develop a building damage scale tailored for analyses based on VHR vertical imagery and to propose a standard for the related interpretation guidelines. The task is carried out by comparing the current scales used for damage assessment by the main satellite based emergency mapping services. The study will analyze the datasets produced after the Ecuador (April 2016) and Central Italy(August and October 2016) earthquakes. The results suggest that by using VHR remotely sensed images it is not possible to directly use damage classification scales addressing structural damages (e.g the 5 grades proposed by EMS-98). A fine-tuning of existing damage classes is therefore required and the adoption of an internationally agreed standard should be encouraged, to streamline the use of SEM products generated by different services.

  10. Direct Geolocation of Satellite Images with the EO-CFI Libraries

    Science.gov (United States)

    de Miguel, Eduardo; Prado, Elena; Estebanez, Monica; Martin, Ana I.; Gonzalez, Malena

    2016-08-01

    The INTA Remote Sensing Laboratory has implemented a tool for the direct geolocation of satellite images. The core of the tool is a C code based on the "Earth Observation Mission CFI SW" from ESA. The tool accepts different types of inputs for satellite attitude (euler angles, quaternions, default attitude models). Satellite position can be provided either in ECEF or ECI coordinates. The line of sight of each individual detector is imported from an external file or is generated by the tool from camera parameters. Global DEM ACE2 is used to define ground intersection of the LOS.The tool has been already tailored for georeferencing images from the forthcoming Spanish Earth Observation mission SEOSat/Ingenio, and for the camera APIS onboard the INTA cubesat OPTOS. The next step is to configure it for the geolocation of Sentinel 2 L1b images.The tool has been internally validated by different means. This validation shows that the tool is suitable for georeferencing images from high spatial resolution missions. As part of the validation efforts, a code for simulating orbital info for LEO missions using EO-CFI has been produced.

  11. Accuracy assessment of topographic mapping using UAV image integrated with satellite images

    Science.gov (United States)

    Azmi, S. M.; Ahmad, Baharin; Ahmad, Anuar

    2014-02-01

    Unmanned Aerial Vehicle or UAV is extensively applied in various fields such as military applications, archaeology, agriculture and scientific research. This study focuses on topographic mapping and map updating. UAV is one of the alternative ways to ease the process of acquiring data with lower operating costs, low manufacturing and operational costs, plus it is easy to operate. Furthermore, UAV images will be integrated with QuickBird images that are used as base maps. The objective of this study is to make accuracy assessment and comparison between topographic mapping using UAV images integrated with aerial photograph and satellite image. The main purpose of using UAV image is as a replacement for cloud covered area which normally exists in aerial photograph and satellite image, and for updating topographic map. Meanwhile, spatial resolution, pixel size, scale, geometric accuracy and correction, image quality and information contents are important requirements needed for the generation of topographic map using these kinds of data. In this study, ground control points (GCPs) and check points (CPs) were established using real time kinematic Global Positioning System (RTK-GPS) technique. There are two types of analysis that are carried out in this study which are quantitative and qualitative assessments. Quantitative assessment is carried out by calculating root mean square error (RMSE). The outputs of this study include topographic map and orthophoto. From this study, the accuracy of UAV image is ± 0.460 m. As conclusion, UAV image has the potential to be used for updating of topographic maps.

  12. Cassini Imaging of Auroral Emissions on the Galilean Satellites

    Science.gov (United States)

    Geissler, P.; McEwen, A.; Porco, C.

    2001-05-01

    Cassini captured several sequences of images showing Io, Europa and Ganymede while the moons were eclipsed by Jupiter. Io was the best studied of the satellites, with 4 eclipses successfully recorded. Earlier eclipse imaging by Galileo (Geissler et al., Science 295, 870-874) had shown colorful atmospheric emissions from Io and raised questions concerning their temporal variability and the identity of the emitting species. With its high data rate and numerous filter combinations, Cassini was able to fill some of the gaps in our knowledge of Io's visible aurorae. Io's bright equatorial glows were detected at previously unknown wavelengths and were also seen in motion. One eclipse took place on 12/29/2000 while Io was far from the plasma torus center. The pair of equatorial glows near the sub-Jupiter and anti-Jupiter points appeared about equal in brightness and changed little in location or intensity over a two hour period. Io crossed the plasma torus center during the next eclipse on 1/01/2001, as it passed through System III magnetic longitudes from 250 to 303 degrees. The equatorial glows were seen to shift in latitude during this eclipse, tracking the tangent points of the jovian magnetic field lines. This behaviour is similar to that observed for ultraviolet and other atomic emissions, and confirms that these visible glows are powered by Birkeland currents connecting Io and Jupiter. The eclipse on 1/05/2001 provided the best spectral measurements of the aurorae. The equatorial glows were detected at near ultraviolet wavelengths, consistent with their interpretation as molecular SO2 emissions. More than 100 kR were recorded in the ISS UV3 filter (300-380 nm) along with a similar intensity in BL1 (290-500 nm), comparable to Galileo estimates. At least 50 kR were detected in UV2 images (265-330 nm). No detection was made in UV1 (235-280 nm), allowing us to place an upper limit of about 100 kR. A new detection of the equatorial glows was made in the IR1 band (670

  13. Effects of rubber shock absorber on the flywheel micro vibration in the satellite imaging system

    Science.gov (United States)

    Deng, Changcheng; Mu, Deqiang; Jia, Xuezhi; Li, Zongxuan

    2016-12-01

    When a satellite is in orbit, its flywheel will generate micro vibration and affect the imaging quality of the camera. In order to reduce this effect, a rubber shock absorber is used, and a numerical model and an experimental setup are developed to investigate its effect on the micro vibration in the study. An integrated model is developed for the system, and a ray tracing method is used in the modeling. The spot coordinates and displacements of the image plane are obtained, and the modulate transfer function (MTF) of the system is calculated. A satellite including a rubber shock absorber is designed, and the experiments are carried out. Both simulation and experiments results show that the MTF increases almost 10 %, suggesting the rubber shock absorber is useful to decrease the flywheel vibration.

  14. Urban Land Use Change Detection Using Multisensor Satellite Images

    Institute of Scientific and Technical Information of China (English)

    DENG Jin-Song; WANG Ke; LI Jun; DENG Yan-Hua

    2009-01-01

    Due to inappropriate planning and management, accelerated urban growth and tremendous loss in land, especially cropland, have become a great challenge for sustainable urban development in China, especially in developed urban area in the coastal regions; therefore, there is an urgent need to effectively detect and monitor the land use changes and provide accurate and timely information for planning and management. In this study a method combining principal component analysis (PCA) of multiseusor satellite images from SPOT (systeme pour l'observation de la terre or earth observation satellite)-5 muttispectral (XS) and Landsat-7 enhanced thematic mapper (ETM) panchromatic (PAN) data, and supervised classification was used to detect and analyze the dynamics of land use changes in the city proper of Hangzhou. The overall accuracy of the land use change detection was 90.67% and Kappa index was 0.89. The results indicated that there was a considerable land use change (10.03% of the total area) in the study area from 2001 to 2003, with three major types of land use conversions: from cropland into bnilt-up land, construction site, and water area (fish pond). Changes from orchard land into built-up land were also detected. The method described in this study is feasible and useful for detecting rapid land use change in the urban area.

  15. Images of war: using satellite images for human rights monitoring in Turkish Kurdistan.

    Science.gov (United States)

    de Vos, Hugo; Jongerden, Joost; van Etten, Jacob

    2008-09-01

    In areas of war and armed conflict it is difficult to get trustworthy and coherent information. Civil society and human rights groups often face problems of dealing with fragmented witness reports, disinformation of war propaganda, and difficult direct access to these areas. Turkish Kurdistan was used as a case study of armed conflict to evaluate the potential use of satellite images for verification of witness reports collected by human rights groups. The Turkish army was reported to be burning forests, fields and villages as a strategy in the conflict against guerrilla uprising. This paper concludes that satellite images are useful to validate witness reports of forest fires. Even though the use of this technology for human rights groups will depend on some feasibility factors such as prices, access and expertise, the images proved to be key for analysis of spatial aspects of conflict and valuable for reconstructing a more trustworthy picture.

  16. TIRCIS: thermal infrared compact imaging spectrometer for small satellite applications

    Science.gov (United States)

    Wright, Robert; Lucey, Paul; Crites, Sarah; Garbeil, Harold; Wood, Mark; Pilger, Eric; Gabrieli, Andrea; Honniball, Casey

    2016-10-01

    Measurements of reflectance or emittance in tens of narrow, contiguous wavebands, allow for the derivation of laboratory quality spectra remotely, from which the chemical composition and physical properties of targets can be determined. Although spaceborne (e.g. EO-1 Hyperion) hyperspectral data in the 0.4-2.5 micron (VSWIR) region are available, the provision of equivalent data in the log-wave infrared has lagged behind, there being no currently operational high spatial resolution LWIR imaging spectrometer on orbit. TIRCIS (Thermal Infra-Red Compact Imaging Spectrometer), uses a Fabry-Perot interferometer, an uncooled microbolometer array, and push-broom scanning to acquire hyperspectral image data. Radiometric calibration is provided by blackbody targets while spectral calibration is achieved using monochromatic light sources. The instrument has a mass of <15 kg and dimensions of 53 cm × 25 cm ♢ 22 cm, and has been designed to be compatible with integration into a micro-satellite platform. (A precursor to this instrument was launched onboard a 55 kg microsatellite in October 2015). The optical design yields a 120 m ground sample size given an orbit of 500 km. Over the wavelength interval of 7.5 to 14 microns up to 50 spectral samples are possible. Measured signal-to-noise ratios range from peak values of 500:1 to 1500:1, for source temperature of 10 to 100°C.

  17. A System to Detect Residential Area in Multispectral Satellite Images

    Directory of Open Access Journals (Sweden)

    Seyfallah Bouraoui

    2011-11-01

    Full Text Available In this paper, we propose a new solution to extract complex structures from High-Resolution (HR remote-sensing images. We propose to represent shapes and there relations by using region adjacency graphs. They are generated automatically from the segmented images. Thus, the nodes of the graph represent shape like houses, streets or trees, while arcs describe the adjacency relation between them. In order to be invariant to transformations such as rotation and scaling, the extraction of objects of interest is done by combining two techniques: one based on roof color to detect the bounding boxes of houses, and one based on mathematical morphology notions to detect streets. To recognize residential areas, a model described by a regular language is built. The detection is achieved by looking for a path in the region adjacency graph, which can be recognized as a word belonging to the description language. Our algorithm was tested with success on images from the French satellite SPOT 5 representing the urban area of Strasbourg (France at different spatial resolution.

  18. Dsm Based Orientation of Large Stereo Satellite Image Blocks

    Science.gov (United States)

    d'Angelo, P.; Reinartz, P.

    2012-07-01

    High resolution stereo satellite imagery is well suited for the creation of digital surface models (DSM). A system for highly automated and operational DSM and orthoimage generation based on CARTOSAT-1 imagery is presented, with emphasis on fully automated georeferencing. The proposed system processes level-1 stereo scenes using the rational polynomial coefficients (RPC) universal sensor model. The RPC are derived from orbit and attitude information and have a much lower accuracy than the ground resolution of approximately 2.5 m. In order to use the images for orthorectification or DSM generation, an affine RPC correction is required. In this paper, GCP are automatically derived from lower resolution reference datasets (Landsat ETM+ Geocover and SRTM DSM). The traditional method of collecting the lateral position from a reference image and interpolating the corresponding height from the DEM ignores the higher lateral accuracy of the SRTM dataset. Our method avoids this drawback by using a RPC correction based on DSM alignment, resulting in improved geolocation of both DSM and ortho images. Scene based method and a bundle block adjustment based correction are developed and evaluated for a test site covering the nothern part of Italy, for which 405 Cartosat-1 Stereopairs are available. Both methods are tested against independent ground truth. Checks against this ground truth indicate a lateral error of 10 meters.

  19. Identifying potential solar power generation sites using satellite apt images

    Science.gov (United States)

    Fawz-Ul-Haq, K. R.; Siddiqui, Z. R.

    1994-01-01

    In this paper, satellite APT images have been used to study cloud-cover over Pakistan, so as to determine those areas which have the least frequency of cloudiness. Such areas are likely to receive maximum insolation, and have been shown on a contour map of Pakistan. It is observed that more than half of Pakistan is highly sunny, and has many promising areas for establishing large scale solar electric power generation stations. It is further observed that, some of the productive mineral-rich areas in remote parts, such as Chagai, are highly cloud-free, therefore, it may be possible to meet their mining needs through solar energy. Thus Pakistan, on the threshold of industrialization, has high prospects of obtaining `clean' energy, free of greenhouse gases.

  20. GNSS Carrier Phase Integer Ambiguity Resolution with Camera and Satellite images

    Science.gov (United States)

    Henkel, Patrick

    2015-04-01

    Ambiguity Resolution is the key to high precision position and attitude determination with GNSS. However, ambiguity resolution of kinematic receivers becomes challenging in environments with substantial multipath, limited satellite availability and erroneous cycle slip corrections. There is a need for other sensors, e.g. inertial sensors that allow an independent prediction of the position. The change of the predicted position over time can then be used for cycle slip detection and correction. In this paper, we provide a method to improve the initial ambiguity resolution for RTK and PPP with vision-based position information. Camera images are correlated with geo-referenced aerial/ satellite images to obtain an independent absolute position information. This absolute position information is then coupled with the GNSS and INS measurements in an extended Kalman filter to estimate the position, velocity, acceleration, attitude, angular rates, code multipath and biases of the accelerometers and gyroscopes. The camera and satellite images are matched based on some characteristic image points (e.g. corners of street markers). We extract these characteristic image points from the camera images by performing the following steps: An inverse mapping (homogenous projection) is applied to transform the camera images from the driver's perspective to bird view. Subsequently, we detect the street markers by performing (a) a color transformation and reduction with adaptive brightness correction to focus on relevant features, (b) a subsequent morphological operation to enhance the structure recognition, (c) an edge and corner detection to extract feature points, and (d) a point matching of the corner points with a template to recognize the street markers. We verified the proposed method with two low-cost u-blox LEA 6T GPS receivers, the MPU9150 from Invensense, the ASCOS RTK corrections and a PointGrey camera. The results show very precise and seamless position and attitude

  1. A data mining based approach to predict spatiotemporal changes in satellite images

    Science.gov (United States)

    Boulila, W.; Farah, I. R.; Ettabaa, K. Saheb; Solaiman, B.; Ghézala, H. Ben

    2011-06-01

    The interpretation of remotely sensed images in a spatiotemporal context is becoming a valuable research topic. However, the constant growth of data volume in remote sensing imaging makes reaching conclusions based on collected data a challenging task. Recently, data mining appears to be a promising research field leading to several interesting discoveries in various areas such as marketing, surveillance, fraud detection and scientific discovery. By integrating data mining and image interpretation techniques, accurate and relevant information (i.e. functional relation between observed parcels and a set of informational contents) can be automatically elicited. This study presents a new approach to predict spatiotemporal changes in satellite image databases. The proposed method exploits fuzzy sets and data mining concepts to build predictions and decisions for several remote sensing fields. It takes into account imperfections related to the spatiotemporal mining process in order to provide more accurate and reliable information about land cover changes in satellite images. The proposed approach is validated using SPOT images representing the Saint-Denis region, capital of Reunion Island. Results show good performances of the proposed framework in predicting change for the urban zone.

  2. Satellite Image Security Improvement by Combining DWT-DCT Watermarking and AES Encryption

    Directory of Open Access Journals (Sweden)

    Naida.H.Nazmudeen

    2014-06-01

    Full Text Available With the large-scale research in space sciences and technologies, there is a great demand of satellite image security system for providing secure storage and transmission of satellite images. As the demand to protect the sensitive and valuable data from satellites has increased and hence proposed a new method for satellite image security by combining DWT-DCT watermarking and AES encryption. Watermarking techniques developed for multimedia data cannot be directly applied to the satellite images because here the analytic integrity of the data, rather than perceptual quality, is of primary importance. To improve performance, combine discrete wavelet transform (DWT with another equally powerful transform; the discrete cosine transform (DCT. The combined DWT-DCT watermarking algorithm’s imperceptibility was better than the performance of the DWT approach. Modified decision based unsymmetrical trimmed median filter (MDBUTMF algorithm is proposed for the restoration of satellite images that are highly corrupted by salt and pepper noise. Satellite images desire not only the watermarking for copyright protection but also encryption during storage and transmission for preventing information leakage. Hence this paper investigates the security and performance level of joint DWT-DCT watermarking and Advanced Encryption Standard (AES for satellite imagery. Theoretical analysis can be done by calculating PSNR and MSE. The experimental results demonstrate the efficiency of the proposed scheme, which fulfils the strict requirements concerning alterations of satellite images.

  3. Imager-to-radiometer inflight cross calibration: RSP radiometric comparison with airborne and satellite sensors

    Directory of Open Access Journals (Sweden)

    J. McCorkel

    2015-10-01

    Full Text Available This work develops a method to compare the radiometric calibration between a radiometer and imagers hosted on aircraft and satellites. The radiometer is the airborne Research Scanning Polarimeter (RSP that takes multi-angle, photo-polarimetric measurements in several spectral channels. The RSP measurements used in this work were coincident with measurements made by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS, which was on the same aircraft. These airborne measurements were also coincident with an overpass of the Landsat 8 Operational Land Imager (OLI. First we compare the RSP and OLI radiance measurements to AVIRIS since the spectral response of the multispectral instruments can be used to synthesize a spectrally equivalent signal from the imaging spectrometer data. We then explore a method that uses AVIRIS as a transfer between RSP and OLI to show that radiometric traceability of a satellite-based imager can be used to calibrate a radiometer despite differences in spectral channel sensitivities. This calibration transfer shows agreement within the uncertainty of both the various instruments for most spectral channels.

  4. Smoothing of Fused Spectral Consistent Satellite Images with TV-based Edge Detection

    DEFF Research Database (Denmark)

    Sveinsson, Johannes; Aanæs, Henrik; Benediktsson, Jon Atli

    2007-01-01

    Several widely used methods have been proposed for fusing high resolution panchromatic data and lower resolution multi-channel data. However, many of these methods fail to maintain the spectral consistency of the fused high resolution image, which is of high importance to many of the applications...... based on satellite data. Additionally, most conventional methods are loosely connected to the image forming physics of the satellite image, giving these methods an ad hoc feel. Vesteinsson et al. [1] proposed a method of fusion of satellite images that is based on the properties of imaging physics...... in a statistically meaningful way and was called spectral consistent panshapening (SCP). In this paper we improve this framework for satellite image fusion by introducing a better image prior, via data-dependent image smoothing. The dependency is obtained via total variation edge detection method....

  5. MORPHOLOGICAL PROFILE AND GRANULOMETRIC MAPS IN EXTRACTION OF BUILDINGS IN VHR SATELLITE IMAGES

    National Research Council Canada - National Science Library

    Kupidura Przemysław; Skulimowska Monika

    2015-01-01

    ...: the morphological profile, and granulometric maps in detecting buildings on satellite images. It briefly explains the theoretical basis for granulometric analysis of image and compares two methods used in research...

  6. Mapping soil heterogeneity using RapidEye satellite images

    Science.gov (United States)

    Piccard, Isabelle; Eerens, Herman; Dong, Qinghan; Gobin, Anne; Goffart, Jean-Pierre; Curnel, Yannick; Planchon, Viviane

    2016-04-01

    In the frame of BELCAM, a project funded by the Belgian Science Policy Office (BELSPO), researchers from UCL, ULg, CRA-W and VITO aim to set up a collaborative system to develop and deliver relevant information for agricultural monitoring in Belgium. The main objective is to develop remote sensing methods and processing chains able to ingest crowd sourcing data, provided by farmers or associated partners, and to deliver in return relevant and up-to-date information for crop monitoring at the field and district level based on Sentinel-1 and -2 satellite imagery. One of the developments within BELCAM concerns an automatic procedure to detect soil heterogeneity within a parcel using optical high resolution images. Such heterogeneity maps can be used to adjust farming practices according to the detected heterogeneity. This heterogeneity may for instance be caused by differences in mineral composition of the soil, organic matter content, soil moisture or soil texture. Local differences in plant growth may be indicative for differences in soil characteristics. As such remote sensing derived vegetation indices may be used to reveal soil heterogeneity. VITO started to delineate homogeneous zones within parcels by analyzing a series of RapidEye images acquired in 2015 (as a precursor for Sentinel-2). Both unsupervised classification (ISODATA, K-means) and segmentation techniques were tested. Heterogeneity maps were generated from images acquired at different moments during the season (13 May, 30 June, 17 July, 31 August, 11 September and 1 November 2015). Tests were performed using blue, green, red, red edge and NIR reflectances separately and using derived indices such as NDVI, fAPAR, CIrededge, NDRE2. The results for selected winter wheat, maize and potato fields were evaluated together with experts from the collaborating agricultural research centers. For a few fields UAV images and/or yield measurements were available for comparison.

  7. Estimating carbon and showing impacts of drought using satellite data in regression-tree models

    Science.gov (United States)

    Boyte, Stephen; Wylie, Bruce K.; Howard, Danny; Dahal, Devendra; Gilmanov, Tagir G.

    2018-01-01

    Integrating spatially explicit biogeophysical and remotely sensed data into regression-tree models enables the spatial extrapolation of training data over large geographic spaces, allowing a better understanding of broad-scale ecosystem processes. The current study presents annual gross primary production (GPP) and annual ecosystem respiration (RE) for 2000–2013 in several short-statured vegetation types using carbon flux data from towers that are located strategically across the conterminous United States (CONUS). We calculate carbon fluxes (annual net ecosystem production [NEP]) for each year in our study period, which includes 2012 when drought and higher-than-normal temperatures influence vegetation productivity in large parts of the study area. We present and analyse carbon flux dynamics in the CONUS to better understand how drought affects GPP, RE, and NEP. Model accuracy metrics show strong correlation coefficients (r) (r ≥ 94%) between training and estimated data for both GPP and RE. Overall, average annual GPP, RE, and NEP are relatively constant throughout the study period except during 2012 when almost 60% less carbon is sequestered than normal. These results allow us to conclude that this modelling method effectively estimates carbon dynamics through time and allows the exploration of impacts of meteorological anomalies and vegetation types on carbon dynamics.

  8. Multifractal analysis of satellite images. (Polish Title: Multifraktalna analiza zobrazowan satelitarnych)

    Science.gov (United States)

    Wawrzaszek, A.; Krupiński, M.; Drzewiecki, W.; Aleksandrowicz, S.

    2015-12-01

    Research presented in this paper is focused on the efficiency assessment of multifractal description as a tool for Image Information Mining. Large datasets of very high spatial resolution satellite images (WorldView-2 and EROS-A) have been analysed. The results have confirmed the superiority of multifractals as global image descriptors in comparison to monofractals. Moreover, their usefulness in image classification by using decision trees classifiers was confirmed, also in comparison with textural features. Filtration process preceding fractal and multifractal features estimations was also proved to improve classification results. Additionally, airborne hyperspectral data have been initially analysed. Fractal dimension shows high potential for the description of hyperspectral data. To summarise all conducted tests indicate the usefulness of multifractal formalism in various aspects of remote sensing. Prepared methodology can be further developed and used for more specific tasks, for example in change detection or in the description of hyperspectal data complexity.

  9. Object-based illumination normalization for multi-temporal satellite images in urban area

    Science.gov (United States)

    Su, Nan; Zhang, Ye; Tian, Shu; Yan, Yiming

    2016-09-01

    Multi-temporal satellite images acquisition with different illumination conditions cause radiometric difference to have a huge effect on image quality during remote sensing image processing. In particular, image matching of satellite stereo images with great difference between acquisition dates is very difficult for the high-precision DSM generation in the field of satellite photogrammetry. Therefore, illumination normalization is one of the greatest application technology to eliminate radiometric difference for image matching and other image applications. In this paper, we proposed a novel method of object-based illumination normalization to improve image matching of different temporal satellite stereo images in urban area. Our proposed method include two main steps: 1) the object extraction 2) multi-level illumination normalization. Firstly, we proposed a object extraction method for the same objects extraction among the multi-temporal satellite images, which can keep the object structural attribute. Moreover, the multi-level illumination normalization is proposed by combining gradient domain method and singular value decomposition (SVD) according to characteristic information of relevant objects. Our proposed method has great improvement for the illumination of object area to be benefit for image matching in urban area with multiple objects. And the histogram similarity parameter and matching rate are used for illumination consistency quantitative evaluation. The experiments have been conducted on different satellite images with different acquisition dates in the same urban area to verify the effectiveness of our proposed method. The experimental results demonstrate a good performance by comparing other methods.

  10. Satellite Image Time Series Decomposition Based on EEMD

    Directory of Open Access Journals (Sweden)

    Yun-long Kong

    2015-11-01

    Full Text Available Satellite Image Time Series (SITS have recently been of great interest due to the emerging remote sensing capabilities for Earth observation. Trend and seasonal components are two crucial elements of SITS. In this paper, a novel framework of SITS decomposition based on Ensemble Empirical Mode Decomposition (EEMD is proposed. EEMD is achieved by sifting an ensemble of adaptive orthogonal components called Intrinsic Mode Functions (IMFs. EEMD is noise-assisted and overcomes the drawback of mode mixing in conventional Empirical Mode Decomposition (EMD. Inspired by these advantages, the aim of this work is to employ EEMD to decompose SITS into IMFs and to choose relevant IMFs for the separation of seasonal and trend components. In a series of simulations, IMFs extracted by EEMD achieved a clear representation with physical meaning. The experimental results of 16-day compositions of Moderate Resolution Imaging Spectroradiometer (MODIS, Normalized Difference Vegetation Index (NDVI, and Global Environment Monitoring Index (GEMI time series with disturbance illustrated the effectiveness and stability of the proposed approach to monitoring tasks, such as applications for the detection of abrupt changes.

  11. The Advanced X-ray Imaging Satellite (AXIS)

    Science.gov (United States)

    Reynolds, Christopher S.; Mushotzky, Richard

    2017-08-01

    The Advanced X-ray Imaging Satellite (AXIS) will follow in the footsteps of the spectacularly successful Chandra X-ray Observatory with similar or higher angular resolution and an order of magnitude more collecting area in the 0.3-10keV band. These capabilities will enable major advances in many of the most active areas of astrophysics, including (i) mapping event horizon scale structure in AGN accretion disks and the determination of supermassive black hole (SMBH) spins through monitoring of gravitationally-microlensed quasars; (ii) dramatically deepening our understanding of AGN feedback in galaxies and galaxy clusters out to high-z through the direct imaging of AGN winds and the interaction of jets with the hot interstellar/intracluster medium; (iii) understanding the fueling of AGN by probing hot flows inside of the SMBH sphere of influence; (iv) obtaining geometric distance measurements using dust scattering halos. With a nominal 2028 launch, AXIS will be enormously synergistic with LSST, ALMA, WFIRST and ATHENA, and will be a valuable precursor to Lynx. AXIS is enabled by breakthroughs in the construction of light-weight X-ray optics from mono-crystalline silicon blocks, building on recent developments in the semiconductor industry. Here, we describe the straw-man concept for AXIS, some of the high profile science that this observatory will address, and how you can become involved.

  12. Search for astronomical sites suitable for infrared observations using GOES satellite images

    Science.gov (United States)

    Ducati, Jorge R.; Feijo, Eleandro S.

    2003-04-01

    Images from GOES satellite were used to develop a method to search for sites suitable to astronomical observations in the infrared. An area of study located in the Peruvian Andes was chosen, with altitudes above 2500 m. Forty-three images from the GOES meteorological satellite in channels 3, 4 and 5 were used. The GOES images, spanning an 11-day period, in each channel, were combined to produced images expressing the surface visibility in each channel. Atmospheric turbulence could be estimated from the variation of visibility over six-hour periods, with one image per hour. As criteria to classify sites on the Andes, we combined information on altitude, visibility of the surface in the infrared, the amount of water vapor in the atmosphere, and atmospheric turbulence. Results of this new method showed that the region of Moquegua, in South Peru, is to be preferred in surveys for astronomical sites. Comparisons with results from other investigators, which used other approaches, indicated that this methodology can produce valid results and can be applied to studies covering larger periods. The general results of this study indicate that the method is valid and can effectively be used as an important resource in surveys for infrared astronomical sites.

  13. Search for astronomical sites suitable for infrared observations using goes satellite images release

    Science.gov (United States)

    Ducati, J. R.; Feijó, E.

    2003-08-01

    Astronomical sites are traditionally found after studies performed over many years, including preliminary selection of places based in general information on climate, clear skies and logistical adequacy. It follows extensive "in situ" monitoring of seeing and cloudiness. Theses procedures are long and expensive, and alternatives can be looked for. In this study, images from GOES meteorological satellite were used to develop a method to search for sites suitable to astronomical observations in the infrared. An area of study located in the Peruvian Andes was chosen, with altitudes above 2500 m. 43 images from the GOES meteorological satellite in chanels 3, 4 and 5 were used. The GOES images, spanning a 11-day period, in each channel, were combined to produced images expressing the surface visibility in each channel. Atmospheric turbulence could be estimated from the variation of visibility over six-hour periods, with one image per hour. As criteria to classify sites on the Andes, we combined information on altitude, visibility of the surface in the infrared, the amount of water vapor in the atmosphere, and atmospheric turbulence. Results of this new method showed that the region of Moquegua, in South Peru, is to be preferred in surveys for astronomical sites. Comparisons with results from other investigators, which used other approaches, indicated that this methodology produces valid results and can be used to studies spanning larger periods. The general results of this study indicate that the method can efectively be used as an important resource in surveys for infrared astronomical sites

  14. True Color Images of the Earth created with the Geostationary Satellite Instrument MSG SEVIRI

    Science.gov (United States)

    Reuter, Maximilian

    2013-04-01

    One of the most famous pictures ever taken was by the crew of Apollo 17 in 1972, showing our Earth from a distance of about 45000km. This picture was named 'Blue Marble' and it reminds us of the beauty and uniqueness of our home planet. With geostationary satellites, such views of the Earth are possible without the need to have a photographer in space. However, up to the present, the production of such Blue Marble type images from geostationary satellite data has been impaired by the lack of channels in the visible spectral region. A method for the generation of full disk MSG (METEOSAT Second Generation) SEVIRI (Scanning-Enhanced Visible and Infrared Imager) true colour composite images will be presented. The algorithm mainly uses the SEVIRI channels VIS006 (0.6μm), NIR008 (0.8μm) and NIR016 (1.6μm). The lack of information in the blue and green parts of the visible spectrum is compensated by using data from NASA's (National Aeronautics and Space Administration's) Blue Marble next generation (BMNG) project to fill a look-up table (LUT) transforming RGB (red/green/blue) false colour composite images of VIS006/NIR008/NIR016 into true colour images. Tabulated radiative transfer calculations of a pure Rayleigh atmosphere are used to add an impression of Rayleigh scattering towards the sunlit horizon. The resulting images satisfy naive expectations: clouds are white or transparent, vegetated surfaces are greenish, deserts are sandy-coloured, the ocean is dark blue to black and a narrow halo due to Rayleigh scattering is visible at the sunlit horizon. Therefore, such images are easily interpretable also for inexperienced users not familiar with the characteristics of typical MSG false colour composite images. The images can be used for scientific applications to illustrate specific meteorological conditions or for non-scientific purposes, for example, for raising awareness in the public of the Earth's worthiness of protection.

  15. High Resolution Imaging of Satellites with Ground-Based 10-m Astronomical Telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Marois, C

    2007-01-04

    High resolution imaging of artificial satellites can play an important role in current and future space endeavors. One such use is acquiring detailed images that can be used to identify or confirm damage and aid repair plans. It is shown that a 10-m astronomical telescope equipped with an adaptive optics system (AO) to correct for atmospheric turbulence using a natural guide star can acquire high resolution images of satellites in low-orbits using a fast shutter and a near-infrared camera even if the telescope is not capable of tracking satellites. With the telescope pointing towards the satellite projected orbit and less than 30 arcsec away from a guide star, multiple images of the satellite are acquired on the detector using the fast shutter. Images can then be shifted and coadded by post processing to increase the satellite signal to noise ratio. Using the Keck telescope typical Strehl ratio and anisoplanatism angle as well as a simple diffusion/reflection model for a satellite 400 km away observed near Zenith at sunset or sunrise, it is expected that such system will produced > 10{sigma} K-band images at a resolution of 10 cm inside a 60 arcsec diameter field of view. If implemented, such camera could deliver the highest resolution satellite images ever acquired from the ground.

  16. High Resolution Imaging of Satellites with Ground-Based 10-m Astronomical Telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Marois, C

    2007-01-04

    High resolution imaging of artificial satellites can play an important role in current and future space endeavors. One such use is acquiring detailed images that can be used to identify or confirm damage and aid repair plans. It is shown that a 10-m astronomical telescope equipped with an adaptive optics system (AO) to correct for atmospheric turbulence using a natural guide star can acquire high resolution images of satellites in low-orbits using a fast shutter and a near-infrared camera even if the telescope is not capable of tracking satellites. With the telescope pointing towards the satellite projected orbit and less than 30 arcsec away from a guide star, multiple images of the satellite are acquired on the detector using the fast shutter. Images can then be shifted and coadded by post processing to increase the satellite signal to noise ratio. Using the Keck telescope typical Strehl ratio and anisoplanatism angle as well as a simple diffusion/reflection model for a satellite 400 km away observed near Zenith at sunset or sunrise, it is expected that such system will produced > 10{sigma} K-band images at a resolution of 10 cm inside a 60 arcsec diameter field of view. If implemented, such camera could deliver the highest resolution satellite images ever acquired from the ground.

  17. Correction of ZY-3 image distortion caused by satellite jitter via virtual steady reimaging using attitude data

    Science.gov (United States)

    Wang, Mi; Zhu, Ying; Jin, Shuying; Pan, Jun; Zhu, Quansheng

    2016-09-01

    ZiYuan-3 (ZY-3), the first Chinese civilian stereo mapping satellite, suffers from 0.67 Hz satellite jitter that deteriorates its geometric performance in mapping, resource monitoring and other applications. This paper proposes a distortion correction method based on virtual steady reimaging (VSRI) using attitude data to eliminate the negative influence caused by satellite jitter in satellite data preprocessing. VSRI helps linear array pushbroom cameras rescan the ground with a uniform integral time and smooth attitude. In this method, a VSRI model is proposed, and the geometric relationship between the original and corrected image is determined in terms of geolocation consistency based on a rigorous geometric model. Thus, the corrected image is obtained by resampling from the original one. Three areas of ZY-3 three-line images suffering from satellite jitter were used to validate the accuracy and efficiency of the proposed method. First, different attitude interpolation methods were compared. It is found that the Lagrange polynomial model and the cubic piecewise polynomial model have higher interpolation accuracy for original imagery. Then, the replacement accuracy of the rational function model (RFM) for ZY-3 was analyzed with 0.67 Hz satellite jitter. The results indicate that attitude oscillation reduces the fitting precision of the RFM for the rigorous imaging model. Finally, the relative orientation accuracy of the three-line images and the geo-positioning accuracy with ground control points (GCPs) before and after distortion correction were compared. The results show that the distortion caused by satellite jitter is corrected efficiently, and the accuracy of the three experimental datasets is improved in both the image space and the ground space.

  18. Digital image processing for the earth resources technology satellite data.

    Science.gov (United States)

    Will, P. M.; Bakis, R.; Wesley, M. A.

    1972-01-01

    This paper discusses the problems of digital processing of the large volumes of multispectral image data that are expected to be received from the ERTS program. Correction of geometric and radiometric distortions are discussed and a byte oriented implementation is proposed. CPU timing estimates are given for a System/360 Model 67, and show that a processing throughput of 1000 image sets per week is feasible.

  19. First Satellite Imaging of Auroral Pulsations by the Fast Auroral Imager on e-POP

    Science.gov (United States)

    Lui, A.; Cogger, L.; Howarth, A. D.; Yau, A. W.

    2015-12-01

    We report the first satellite imaging of auroral pulsations by the Fast Auroral Imager (FAI) onboard the Enhanced Polar Outflow Probe (e-POP) satellite. The near-infrared camera of FAI is capable of providing up to two auroral images per second, ideal for investigation of pulsating auroras. The auroral pulsations were observed within the auroral bulge formed during a substorm interval on 2014 February 19. This first satellite view of these pulsations from FAI reveals that (1) several pulsating auroral channels (PACs) occur within the auroral bulge, (2) periods of the intensity pulsations span over one decade within the auroral bulge, and (3) there is no apparent trend of longer pulsation periods associated with higher latitudes for these PACs. Although PACs resemble in some respect stable pulsating auroras reported previously but they have several important differences in characteristics.PACs are not embedded in or emerging from omega bands or torches and are located at significant distances from the equatorward boundary of the auroral oval, unlike the characteristics of stable pulsating auroras.

  20. Estimate Landslide Volume with Genetic Algorithms and Image Similarity Method from Single Satellite Image

    Science.gov (United States)

    Yu, Ting-To

    2013-04-01

    It is important to acquire the volume of landslide in short period of time. For hazard mitigation and also emergency response purpose, the traditional method takes much longer time than expected. Due to the weather limit, traffic accessibility and many regulations of law, it take months to handle these process before the actual carry out of filed work. Remote sensing imagery can get the data as long as the visibility allowed, which happened only few day after the event. While traditional photometry requires a stereo pairs images to produce the post event DEM for calculating the change of volume. Usually have to wait weeks or even months for gathering such data, LiDAR or ground GPS measurement might take even longer period of time with much higher cost. In this study we use one post event satellite image and pre-event DTM to compare the similarity between these by alter the DTM with genetic algorithms. The outcome of smartest guess from GAs shall remove or add exact values of height at each location, which been converted into shadow relief viewgraph to compare with satellite image. Once the similarity threshold been make then the guessing work stop. It takes only few hours to finish the entire task, the computed accuracy is around 70% by comparing to the high resolution LiDAR survey at a landslide, southern Taiwan. With extra GCPs, the estimate accuracy can improve to 85% and also within few hours after the receiving of satellite image. Data of this demonstration case is a 5 m DTM at 2005, 2M resolution FormoSat optical image at 2009 and 5M LiDAR at 2010. The GAs and image similarity code is developed on Matlab at windows PC.

  1. The Application of the Technology of 3D Satellite Cloud Imaging in Virtual Reality Simulation

    Directory of Open Access Journals (Sweden)

    Xiao-fang Xie

    2007-05-01

    Full Text Available Using satellite cloud images to simulate clouds is one of the new visual simulation technologies in Virtual Reality (VR. Taking the original data of satellite cloud images as the source, this paper depicts specifically the technology of 3D satellite cloud imaging through the transforming of coordinates and projection, creating a DEM (Digital Elevation Model of cloud imaging and 3D simulation. A Mercator projection was introduced to create a cloud image DEM, while solutions for geodetic problems were introduced to calculate distances, and the outer-trajectory science of rockets was introduced to obtain the elevation of clouds. For demonstration, we report on a computer program to simulate the 3D satellite cloud images.

  2. Spatial and radiometric characterization of multi-spectrum satellite images through multi-fractal analysis

    Science.gov (United States)

    Alonso, Carmelo; Tarquis, Ana M.; Zúñiga, Ignacio; Benito, Rosa M.

    2017-03-01

    Several studies have shown that vegetation indexes can be used to estimate root zone soil moisture. Earth surface images, obtained by high-resolution satellites, presently give a lot of information on these indexes, based on the data of several wavelengths. Because of the potential capacity for systematic observations at various scales, remote sensing technology extends the possible data archives from the present time to several decades back. Because of this advantage, enormous efforts have been made by researchers and application specialists to delineate vegetation indexes from local scale to global scale by applying remote sensing imagery. In this work, four band images have been considered, which are involved in these vegetation indexes, and were taken by satellites Ikonos-2 and Landsat-7 of the same geographic location, to study the effect of both spatial (pixel size) and radiometric (number of bits coding the image) resolution on these wavelength bands as well as two vegetation indexes: the Normalized Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI). In order to do so, a multi-fractal analysis of these multi-spectral images was applied in each of these bands and the two indexes derived. The results showed that spatial resolution has a similar scaling effect in the four bands, but radiometric resolution has a larger influence in blue and green bands than in red and near-infrared bands. The NDVI showed a higher sensitivity to the radiometric resolution than EVI. Both were equally affected by the spatial resolution. From both factors, the spatial resolution has a major impact in the multi-fractal spectrum for all the bands and the vegetation indexes. This information should be taken in to account when vegetation indexes based on different satellite sensors are obtained.

  3. An anti-image interference quadrature IF architecture for satellite receivers

    Directory of Open Access Journals (Sweden)

    He Weidong

    2014-08-01

    Full Text Available Since Global Navigation Satellite System (GNSS signals span a wide range of frequency, wireless signals coming from other communication systems may be aliased and appear as image interference. In quadrature intermediate frequency (IF receivers, image aliasing due to in-phase and quadrature (I/Q channel mismatches is always a big problem. I/Q mismatches occur because of gain and phase imbalances between quadrature mixers and capacitor mismatches in analog-to-digital converters (ADC. As a result, the dynamic range and performance of a receiver are severely degraded. In this paper, several popular receiver architectures are summarized and the image aliasing problem is investigated in detail. Based on this analysis, a low-IF architecture is proposed for a single-chip solution and a novel and feasible anti-image algorithm is investigated. With this anti-image digital processing, the image reject ratio (IRR can reach approximately above 50 dB, which relaxes image rejection specific in front-end circuit designs and allows cheap and highly flexible analog front-end solutions. Simulation and experimental data show that the anti-image algorithm can work effectively, robustly, and steadily.

  4. An anti-image interference quadrature IF architecture for satellite receivers

    Institute of Scientific and Technical Information of China (English)

    He Weidong; Lu Xiaochun; He Chengyan; James Torley

    2014-01-01

    Since Global Navigation Satellite System (GNSS) signals span a wide range of frequency, wireless signals coming from other communication systems may be aliased and appear as image interference. In quadrature intermediate frequency (IF) receivers, image aliasing due to in-phase and quadrature (I/Q) channel mismatches is always a big problem. I/Q mismatches occur because of gain and phase imbalances between quadrature mixers and capacitor mismatches in ana-log-to-digital converters (ADC). As a result, the dynamic range and performance of a receiver are severely degraded. In this paper, several popular receiver architectures are summarized and the image aliasing problem is investigated in detail. Based on this analysis, a low-IF architecture is pro-posed for a single-chip solution and a novel and feasible anti-image algorithm is investigated. With this anti-image digital processing, the image reject ratio (IRR) can reach approximately above 50 dB, which relaxes image rejection specific in front-end circuit designs and allows cheap and highly flexible analog front-end solutions. Simulation and experimental data show that the anti-image algorithm can work effectively, robustly, and steadily.

  5. A Framework for Satellite Image Enhancement Using Quantum Genetic and Weighted IHS+Wavelet Fusion Method

    Directory of Open Access Journals (Sweden)

    Amal A. HAMED

    2016-04-01

    Full Text Available this paper examined the applicability of quantum genetic algorithms to solve optimization problems posed by satellite image enhancement techniques, particularly super-resolution, and fusion. We introduce a framework starting from reconstructing the higher-resolution panchromatic image by using the subpixel-shifts between a set of lower-resolution images (registration, then interpolation, restoration, till using the higher-resolution image in pan-sharpening a multispectral image by weighted IHS+Wavelet fusion technique. For successful super-resolution, accurate image registration should be achieved by optimal estimation of subpixel-shifts. Optimal-parameters blind restoration and interpolation should be performed for the optimal quality higher-resolution image. There is a trade-off between spatial and spectral enhancement in image fusion; it is difficult for the existing methods to do the best in both aspects. The objective here is to achieve all combined requirements with optimal fusion weights, and use the parameters constraints to direct the optimization process. QGA is used to estimate the optimal parameters needed for each mathematic model in this framework “Super-resolution and fusion.” The simulation results show that the QGA-based method can be used successfully to estimate automatically the approaching parameters which need the maximal accuracy, and achieve higher quality and efficient convergence rate more than the corresponding conventional GA-based and the classic computational methods.

  6. Comparing Manual and Semi-Automated Landslide Mapping Based on Optical Satellite Images from Different Sensors

    Directory of Open Access Journals (Sweden)

    Daniel Hölbling

    2017-05-01

    Full Text Available Object-based image analysis (OBIA has been increasingly used to map geohazards such as landslides on optical satellite images. OBIA shows various advantages over traditional image analysis methods due to its potential for considering various properties of segmentation-derived image objects (spectral, spatial, contextual, and textural for classification. For accurately identifying and mapping landslides, however, visual image interpretation is still the most widely used method. The major question therefore is if semi-automated methods such as OBIA can achieve results of comparable quality in contrast to visual image interpretation. In this paper we apply OBIA for detecting and delineating landslides in five selected study areas in Austria and Italy using optical Earth Observation (EO data from different sensors (Landsat 7, SPOT-5, WorldView-2/3, and Sentinel-2 and compare the OBIA mapping results to outcomes from visual image interpretation. A detailed evaluation of the mapping results per study area and sensor is performed by a number of spatial accuracy metrics, and the advantages and disadvantages of the two approaches for landslide mapping on optical EO data are discussed. The analyses show that both methods produce similar results, whereby the achieved accuracy values vary between the study areas.

  7. Spatio-temporal multi-modality ontology for indexing and retrieving satellite images

    OpenAIRE

    MESSOUDI, Wassim; FARAH, Imed Riadh; SAHEB ETTABAA, Karim; Ben Ghezala, Henda; SOLAIMAN, Basel

    2009-01-01

    International audience; This paper presents spatio-temporal multi-modality ontology for indexing and retrieving satellite images in the high level to improve the quality of the system retrieval and to perform semantic in the retrieval process.Our approach is based on three modules: (1) regions and features extraction, (2) ontological indexing and (3) semantic image retrieval. The first module allows extracting regions from the satellite image using the fuzzy c-means FCM) segmentation algorith...

  8. Revealing glacier flow and surge dynamics from animated satellite image sequences: examples from the Karakoram

    OpenAIRE

    Paul, F

    2015-01-01

    Although animated images are very popular on the internet, they have so far found only limited use for glaciological applications. With long time series of satellite images becoming increasingly available and glaciers being well recognized for their rapid changes and variable flow dynamics, animated sequences of multiple satellite images reveal glacier dynamics in a time-lapse mode, making the otherwise slow changes of glacier movement visible and understandable to the wider...

  9. Image-processing techniques in precisely measuring positions of Saturn and its satellites

    Institute of Scientific and Technical Information of China (English)

    PENG; Qingyu; (彭青玉)

    2003-01-01

    After overcoming the deficiencies of previous image-processing techniques, a novel technique based on the edge-detection of Saturnian ring is developed to precisely measure Saturn's position. Furthermore, the scattering light (i.e. halo light) of Saturn and its ring is removed effectively based on its center symmetry. Therefore, we have much more opportunities to accurately measure the positions of Mimas and Enceladus-- two satellites very close to the Saturn. Experimental tests with 127 frames of CCD images obtained on the 1-meter telescope at the Yunnan Observatory over three nights show that the geometric center of the Saturnian ring and its 4 satellites (Tethys, Dione, Rhea and Titan) have the same positional precision, and the standard error for a single observation is less than ±0.05 arcsec. It is believed that these new techniques would have important impetus to the positional measurement of both Saturn by using a CCD meridian instrument and its faint satellites by using a long focal length telescope.

  10. Image jitter detection and compensation using a high-frequency angular displacement method for Yaogan-26 remote sensing satellite

    Science.gov (United States)

    Wang, Mi; Fan, Chengcheng; Pan, Jun; Jin, Shuying; Chang, Xueli

    2017-08-01

    Satellite platform jitter is an important factor restricting the imaging quality of high-resolution (HR) optical satellite images. To address the critical issue of compensation for attitude jitter in HR images, this paper proposes a steady-state reimaging model using high-frequency angular displacement data to detect and compensate for the attitude jitter of HR images. The bidirectional Kalman filter and overall weighted smoothing method helps realizing information fusion of star sensor and angular displacement sensor and obtaining the high-frequency attitude for image jitter detection. Then, the steady reimaging model is used to correct the distorted image with geolocation consistency based on a rigorous geometric model. The Yaogan-26 remote sensing satellite's distorted panchromatic images of airports, targets and calibration fields affected by platform jitter were used to validate the effectiveness and accuracy of the proposed method. The compensation results show that the proposed method can effectively improve the relative geometric quality of images affected by platform jitter, with the images' jitter distortion being clearly eliminated. Compared to the conventional compensation method that bundle adjustment with GCPs, the absolute geometric accuracy can also be improved.

  11. Region of Interest Detection Based on Histogram Segmentation for Satellite Image

    Science.gov (United States)

    Kiadtikornthaweeyot, Warinthorn; Tatnall, Adrian R. L.

    2016-06-01

    High resolution satellite imaging is considered as the outstanding applicant to extract the Earth's surface information. Extraction of a feature of an image is very difficult due to having to find the appropriate image segmentation techniques and combine different methods to detect the Region of Interest (ROI) most effectively. This paper proposes techniques to classify objects in the satellite image by using image processing methods on high-resolution satellite images. The systems to identify the ROI focus on forests, urban and agriculture areas. The proposed system is based on histograms of the image to classify objects using thresholding. The thresholding is performed by considering the behaviour of the histogram mapping to a particular region in the satellite image. The proposed model is based on histogram segmentation and morphology techniques. There are five main steps supporting each other; Histogram classification, Histogram segmentation, Morphological dilation, Morphological fill image area and holes and ROI management. The methods to detect the ROI of the satellite images based on histogram classification have been studied, implemented and tested. The algorithm is be able to detect the area of forests, urban and agriculture separately. The image segmentation methods can detect the ROI and reduce the size of the original image by discarding the unnecessary parts.

  12. High resolution Doppler imager on the Upper Atmosphere Research Satellite

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, W.R.; Hays, P.B.; Grassl, H.J.; Gell, D.A.; Burrage, M.D.; Marshall, A.R.; Ortland, D.A. [Univ. of Michigan, Ann Arbor, MI (United States)

    1994-12-31

    The High Resolution Doppler Imager (HRDI) on the Upper Atmosphere Research Satellite has been providing measurements of the wind field in the stratosphere, mesosphere and lower thermosphere since November 1991. Examination of various calibration data indicates the instrument has remained remarkably stable since launch. The instrument has a thermal drift of about 30 m/s/{degree}C (slightly dependent on wavelength) and a long-term temporal drift that has amounted to about 80 m/s since launch. These effects are removed in the data processing leaving an uncertainty in the instrument stability of {minus}2 nVs. The temperature control of the instrument has improved significantly since launch as a new method was implemented. The initial temperature control held the instrument temperature at about {+-}1{degree}C. The improved method, which holds constant the temperature of the optical bench instead of the radiator, keeps the instrument temperature at about 0.2{degree}C. The calibrations indicate very little change in the sensitivity of the instrument. The detector response has shown no degradation and the optics have not changed their transmittance.

  13. Improving multispectral satellite image compression using onboard subpixel registration

    Science.gov (United States)

    Albinet, Mathieu; Camarero, Roberto; Isnard, Maxime; Poulet, Christophe; Perret, Jokin

    2013-09-01

    Future CNES earth observation missions will have to deal with an ever increasing telemetry data rate due to improvements in resolution and addition of spectral bands. Current CNES image compressors implement a discrete wavelet transform (DWT) followed by a bit plane encoding (BPE) but only on a mono spectral basis and do not profit from the multispectral redundancy of the observed scenes. Recent CNES studies have proven a substantial gain on the achievable compression ratio, +20% to +40% on selected scenarios, by implementing a multispectral compression scheme based on a Karhunen Loeve transform (KLT) followed by the classical DWT+BPE. But such results can be achieved only on perfectly registered bands; a default of registration as low as 0.5 pixel ruins all the benefits of multispectral compression. In this work, we first study the possibility to implement a multi-bands subpixel onboard registration based on registration grids generated on-the-fly by the satellite attitude control system and simplified resampling and interpolation techniques. Indeed bands registration is usually performed on ground using sophisticated techniques too computationally intensive for onboard use. This fully quantized algorithm is tuned to meet acceptable registration performances within stringent image quality criteria, with the objective of onboard real-time processing. In a second part, we describe a FPGA implementation developed to evaluate the design complexity and, by extrapolation, the data rate achievable on a spacequalified ASIC. Finally, we present the impact of this approach on the processing chain not only onboard but also on ground and the impacts on the design of the instrument.

  14. Satellite Image Processing for Land Use and Land Cover Mapping

    Directory of Open Access Journals (Sweden)

    Ashoka Vanjare

    2014-09-01

    Full Text Available In this paper, urban growth of Bangalore region is analyzed and discussed by using multi-temporal and multi-spectral Landsat satellite images. Urban growth analysis helps in understanding the change detection of Bangalore region. The change detection is studied over a period of 39 years and the region of interest covers an area of 2182 km2. The main cause for urban growth is the increase in population. In India, rapid urbanization is witnessed due to an increase in the population, continuous development has affected the existence of natural resources. Therefore observing and monitoring the natural resources (land use plays an important role. To analyze changed detection, researcher’s use remote sensing data. Continuous use of remote sensing data helps researchers to analyze the change detection. The main objective of this study is to monitor land cover changes of Bangalore district which covers rural and urban regions using multi-temporal and multi-sensor Landsat - multi-spectral scanner (MSS, thematic mapper (TM, Enhanced Thematic mapper plus (ETM+ MSS, TM and ETM+ images captured in the years 1973, 1992, 1999, 2002, 2005, 2008 and 2011. Temporal changes were determined by using maximum likelihood classification method. The classification results contain four land cover classes namely, built-up, vegetation, water and barren land. The results indicate that the region is densely developed which has resulted in decrease of water and vegetation regions. The continuous transformation of barren land to built-up region has affected water and vegetation regions. Generally, from 1973 to 2011 the percentage of urban region has increased from 4.6% to 25.43%, mainly due to urbanization.

  15. Evaluation of Satellite Image Correction Methods Caused by Differential Terrain Illumination

    Directory of Open Access Journals (Sweden)

    Purnama Budi Santosa

    2016-08-01

    Full Text Available The problem due to differential terrain illumination on satellite imagery is experienced by most of areas which are on mountainous terrain. This may cause variations in reflectance of similar ground features which lead to a misclassification of land cover classes due to different topographic positions. This phenomenon most commonly occurred in the areas which are located on southern and northern hemisphere because of the low sun inclination. This problem has been a major interest for researchers to be solved prior to the land cover classification process. For satellite images which experience this kind of problem, topographic correction need to be applied in order to reduce the illumination effects prior to land cover classification process. This research is aimed at conducting topographic correction of multi spectral SPOT satellite data as well as evaluating the three topographic correction methods. They are Cosine which is based on Lambertian reflectance assumption, as well as Minnaert correction and C correction methods which are based on non-Lambertian reflectance assumption. The data used in this study are two scenes of SPOT images of forested mountainous area of Miyazaki Prefecture, Kyushu, Japan. Research steps had been conducted in this study including geometric correction, sample data collection for calculating Minnaert constants and C constants at location which represents the whole study area, topographic correction for two scenes SPOT images, and results analysis. The results show that Cosine method did not show good performance for the study area which is topographically dominated by rugged terrain. Whereas Minnaert method and C method gave satisfactory results as is indicated by the statistical data as well as visual interpretation. However the Minnaert correction method showed slightly better performance than the C correction method.

  16. LineCast: line-based distributed coding and transmission for broadcasting satellite images.

    Science.gov (United States)

    Wu, Feng; Peng, Xiulian; Xu, Jizheng

    2014-03-01

    In this paper, we propose a novel coding and transmission scheme, called LineCast, for broadcasting satellite images to a large number of receivers. The proposed LineCast matches perfectly with the line scanning cameras that are widely adopted in orbit satellites to capture high-resolution images. On the sender side, each captured line is immediately compressed by a transform-domain scalar modulo quantization. Without syndrome coding, the transmission power is directly allocated to quantized coefficients by scaling the coefficients according to their distributions. Finally, the scaled coefficients are transmitted over a dense constellation. This line-based distributed scheme features low delay, low memory cost, and low complexity. On the receiver side, our proposed line-based prediction is used to generate side information from previously decoded lines, which fully utilizes the correlation among lines. The quantized coefficients are decoded by the linear least square estimator from the received data. The image line is then reconstructed by the scalar modulo dequantization using the generated side information. Since there is neither syndrome coding nor channel coding, the proposed LineCast can make a large number of receivers reach the qualities matching their channel conditions. Our theoretical analysis shows that the proposed LineCast can achieve Shannon's optimum performance by using a high-dimensional modulo-lattice quantization. Experiments on satellite images demonstrate that it achieves up to 1.9-dB gain over the state-of-the-art 2D broadcasting scheme and a gain of more than 5 dB over JPEG 2000 with forward error correction.

  17. Utilization of satellite images to understand the dynamics of Pampas shallow lakes

    Directory of Open Access Journals (Sweden)

    V. S. Aliaga

    2016-06-01

    Full Text Available The aim of this study was to analyze satellite images of different spatial resolutions to interpret the morphometric behavior of six shallow lakes of the Pampas, Argentina. These are characterized by having different rainfall regimes. Morphometric response considering each location, site conditions and dry and wet extreme events is analyzed. Standardized Precipitation Index (IEP for determination of wet, dry and normal years was used. This analysis showed that the Pampas shallow lakes do not behave in the same way to the rainfall events. Its origin, socio-economic use and rainfall patterns affect their spatiotemporal variation and morphometric.

  18. Monitoring an air pollution episode in Shenzhen by combining MODIS satellite images and the HYSPLIT model

    Science.gov (United States)

    Li, Lili; Liu, Yihong; Wang, Yunpeng

    2017-07-01

    Urban air pollution is influenced not only by local emission sources including industry and vehicles, but also greatly by regional atmospheric pollutant transportation from the surrounding areas, especially in developed city clusters, like the Pearl River Delta (PRD). Taking an air pollution episode in Shenzhen as an example, this paper investigates the occurrence and evolution of the pollution episode and identifies the transport pathways of air pollutants in Shenzhen by combining MODIS satellite images and HYSPLIT back trajectory analysis. Results show that this pollution episode is mainly caused by the local emission of pollutants in PRD and oceanic air masses under specific weather conditions.

  19. Imaging-Duration Embedded Dynamic Scheduling of Earth Observation Satellites for Emergent Events

    Directory of Open Access Journals (Sweden)

    Xiaonan Niu

    2015-01-01

    Full Text Available We present novel two-stage dynamic scheduling of earth observation satellites to provide emergency response by making full use of the duration of the imaging task execution. In the first stage, the multiobjective genetic algorithm NSGA-II is used to produce an optimal satellite imaging schedule schema, which is robust to dynamic adjustment as possible emergent events occur in the future. In the second stage, when certain emergent events do occur, a dynamic adjusting heuristic algorithm (CTM-DAHA is applied to arrange new tasks into the robust imaging schedule. Different from the existing dynamic scheduling methods, the imaging duration is embedded in the two stages to make full use of current satellite resources. In the stage of robust satellite scheduling, total task execution time is used as a robust indicator to obtain a satellite schedule with less imaging time. In other words, more imaging time is preserved for future emergent events. In the stage of dynamic adjustment, a compact task merging strategy is applied to combine both of existing tasks and emergency tasks into a composite task with least imaging time. Simulated experiments indicate that the proposed method can produce a more robust and effective satellite imaging schedule.

  20. Wave Period and Coastal Bathymetry Estimations from Satellite Images

    Science.gov (United States)

    Danilo, Celine; Melgani, Farid

    2016-08-01

    We present an approach for wave period and coastal water depth estimation. The approach based on wave observations, is entirely independent of ancillary data and can theoretically be applied to SAR or optical images. In order to demonstrate its feasibility we apply our method to more than 50 Sentinel-1A images of the Hawaiian Islands, well-known for its long waves. Six wave buoys are available to compare our results with in-situ measurements. The results on Sentinel-1A images show that half of the images were unsuitable for applying the method (no swell or wavelength too small to be captured by the SAR). On the other half, 78% of the estimated wave periods are in accordance with buoy measurements. In addition, we present preliminary results of the estimation of the coastal water depth on a Landsat-8 image (with characteristics close to Sentinel-2A). With a squared correlation coefficient of 0.7 for ground truth measurement, this approach reveals promising results for monitoring coastal bathymetry.

  1. Shadow imaging of geosynchronous satellites: simulation, image reconstruction, and shadow prediction

    Science.gov (United States)

    Douglas, Dennis M.; Hunt, Bobby R.; Sheppard, David G.

    2016-09-01

    Shadow imaging is a technique to obtain highly resolved silhouettes of resident space objects (RSOs) which would otherwise be unattainable using conventional terrestrial based imaging approaches. This is done by post processing the measured irradiance pattern (shadow) cast onto the Earth as the RSO occults a star. The research presented here focuses on shadow imaging of geosynchronous (GEO) satellites with near stationary orbits approximately 36,000 km from the Earth. Shadows pertaining to a set of diverse observing scenarios are simulated and used as inputs to a Fresnel based phase retrieval algorithm. Spatial resolution limits are evaluated and correlated to signal to noise (SNR) metrics. Resolvable feature sizes of less than 1 m are shown to be readily achievable using foreseeable observing scenarios. Initial output from a shadow prediction tool indicates that there are, on average, over 1000 shadows on the Earth on any given time from a single GEO satellite for stars brighter than mv=10. Shadow ground track uncertainties are correlated to stellar astrometric errors. Global and localized shadow track maps are presented demonstrating a high feasibility for future shadow collections.

  2. Combined Use of Multi-Temporal Optical and Radar Satellite Images for Grassland Monitoring

    Directory of Open Access Journals (Sweden)

    Pauline Dusseux

    2014-06-01

    Full Text Available The aim of this study was to assess the ability of optical images, SAR (Synthetic Aperture Radar images and the combination of both types of data to discriminate between grasslands and crops in agricultural areas where cloud cover is very high most of the time, which restricts the use of visible and near-infrared satellite data. We compared the performances of variables extracted from four optical and five SAR satellite images with high/very high spatial resolutions acquired during the growing season. A vegetation index, namely the NDVI (Normalized Difference Vegetation Index, and two biophysical variables, the LAI (Leaf Area Index and the fCOVER (fraction of Vegetation Cover were computed using optical time series and polarization (HH, VV, HV, VH. The polarization ratio and polarimetric decomposition (Freeman–Durden and Cloude–Pottier were calculated using SAR time series. Then, variables derived from optical, SAR and both types of remotely-sensed data were successively classified using the Support Vector Machine (SVM technique. The results show that the classification accuracy of SAR variables is higher than those using optical data (0.98 compared to 0.81. They also highlight that the combination of optical and SAR time series data is of prime interest to discriminate grasslands from crops, allowing an improved classification accuracy.

  3. Vegetation Height Estimation Near Power transmission poles Via satellite Stereo Images using 3D Depth Estimation Algorithms

    Science.gov (United States)

    Qayyum, A.; Malik, A. S.; Saad, M. N. M.; Iqbal, M.; Abdullah, F.; Rahseed, W.; Abdullah, T. A. R. B. T.; Ramli, A. Q.

    2015-04-01

    Monitoring vegetation encroachment under overhead high voltage power line is a challenging problem for electricity distribution companies. Absence of proper monitoring could result in damage to the power lines and consequently cause blackout. This will affect electric power supply to industries, businesses, and daily life. Therefore, to avoid the blackouts, it is mandatory to monitor the vegetation/trees near power transmission lines. Unfortunately, the existing approaches are more time consuming and expensive. In this paper, we have proposed a novel approach to monitor the vegetation/trees near or under the power transmission poles using satellite stereo images, which were acquired using Pleiades satellites. The 3D depth of vegetation has been measured near power transmission lines using stereo algorithms. The area of interest scanned by Pleiades satellite sensors is 100 square kilometer. Our dataset covers power transmission poles in a state called Sabah in East Malaysia, encompassing a total of 52 poles in the area of 100 km. We have compared the results of Pleiades satellite stereo images using dynamic programming and Graph-Cut algorithms, consequently comparing satellites' imaging sensors and Depth-estimation Algorithms. Our results show that Graph-Cut Algorithm performs better than dynamic programming (DP) in terms of accuracy and speed.

  4. Satellite image blind restoration based on surface fitting and multivariate model

    Institute of Scientific and Technical Information of China (English)

    CHEN Xin-bing; YANG Shi-zhi; WANG Xian-hua; QIAO Yan-li

    2009-01-01

    Owing to the blurring effect from atmosphere and camera system in the satellite imaging a blind image restoration algo-rithm is proposed which includes the modulation transfer function (MTF) estimation and the image restoration. In the MTF estimation stage, based on every degradation process of satellite imaging-chain, a combined parametric model of MTF is given and used to fit the surface of normalized logarithmic amplitude spectrum of degraded image. In the image restoration stage, a maximum a posteriori (MAP) based edge-preserving image restoration method is presented which introduces multivariate Laplacian model to characterize the prior distribution of wavelet coefficients of original image. During the image restoration, in order to avoid solving high nonlinear equations, optimization transfer algorithm is adopted to decom-pose the image restoration procedure into two simple steps: Landweber iteration and wavelet thresholding denoising. In the numerical experiment, the satellite image restoration results from SPOT-5 and high resolution camera (HR) of China & Brazil earth resource satellite (CBERS-02B) ane compared, and the proposed algorithm is superior in the image edge preservation and noise inhibition.

  5. A method of using commercial virtual satellite image to check the pattern painting spot effect

    Science.gov (United States)

    Wang, Zheng-gang; Kang, Qing; Shen, Zhi-qiang; Cui, Chang-bin

    2014-02-01

    A method of using commercial virtual satellite image to check the pattern painting spot effect contrast with the satellite images before painting and after painting have been discussed. Using a housetop as the testing platform analyses and discusses the factors' influence such as resolution of satellite image, spot size and color of pattern painting spot and pattern painting camouflage method choosing to the plan implement. The pattern painting design and spot size used in the testing has been ensured, and housetop pattern painting has been painted. Finally, the small spot pattern painting camouflage effect of engineering using upon painting pattern size, color and texture have been checked, contrasting with the satellite image before painting and after painting.

  6. A study on quality and availability of COCTS images of HY- 1 satellite by simulation

    Institute of Scientific and Technical Information of China (English)

    李淑菁; 毛天明; 潘德炉

    2002-01-01

    Hy-1 is a first China's ocean color satellite which will be launched as a piggyback satellite on FY- 1 satellite using Long March rocket. On the satellite there are two sensors: one is the China's ocean color and temperature scanner (COCTS), the other is CCD coastal zone imager (CZI).The COCTS is considered to be a main sensor to play a key role. In order to understand the characteristics of future ocean color images observed, a simulation and evaluation study on the quality and availability of the COCTS image has been done. First, the simulation models are introduced briefly, and typical simulated cases of radiance images at visible bands are introduced, in which the radiance distribution is based on geographic location, the satellite orbital parameters and sensor properties, the simulated method to evaluate the image quality and availability is developed by using the characteristics of image called the complex signal noise ratio ( CSNR ). Meanwhile, a series of the CSNR images are generated from the simulated radiance components for different cases, which can be used to evaluate the quality and availability of the COCTS images before the HY - 1 is placed in orbit. Finally, the quality and availability of the COCTS images are quantitatively analyzed with the simulated CSNR data. The results will be beneficial to all scientists who are in charge of the COCTS mission and to those who plan to use the data from the COCTS.

  7. Integrated use of satellite images, DEMs, soil and substrate data in studying mountainous lands

    Science.gov (United States)

    Giannetti, Fabio; Montanarella, Luca; Salandin, Roberto

    A method based on the integration into a GIS of satellite images of different spatial resolution (Landsat TM and SPOT), Digital Elevation Models, geo-lithological maps and some soil-landscape data was developed and applied to a test area on a sector of the Italian northwestern Alps in the Piemonte region (Pellice, Po, Varaita and Maira valleys southwest of Torino). The main working steps performed (using GIS software) in this area were: (1) acquisition of geo-lithological and geomorphological maps available and a first definition of homogeneous zones obtained by joining different classes with pedogenic criteria; (2) processing and classification of satellite images to define homogeneous areas with reference to prevailing land cover, land use pattern, relief shape and spectral characters; (3) integration of the previous two layers to obtain a first set of cartographic units showing a distinctive and often repetitive pattern of land form, land cover and parent material; and (4) processing DEMs (slope and aspect), soil or soil-landscape data in order to refine data and characterise the units. The resulting cartographic units were superimposed on a soil-landscape map realised by means of stereoscopic interpretation of aerial photographs by IPLA at the same scale (1:250,000). This comparison was used to verify the correctness of the satellite image processing steps and consistency with the map scale used. A larger scale application was also developed for grassland at 1:50,000 scale to demonstrate the practical use of remote sensing and GIS data in assisting mountainous land development.

  8. Solar irradiance assessment in insular areas using Himawari-8 satellite images

    Science.gov (United States)

    Liandrat, O.; Cros, S.; Turpin, M.; Pineau, J. F.

    2016-12-01

    The high amount of surface solar irradiance (SSI) in the tropics is an advantage for a profitable PV production. It will allow many tropical islands to pursue their economic growth with a clean, affordable and locally produced energy. However, the local meteorological conditions induce a very high variability which is problematic for a safe and gainful injection into the power grid. This issue is even more critical in non-interconnected territories where network stability is an absolute necessity. Therefore, the injection of PV power is legally limited in some European oversea territories. In this context, intraday irradiance forecasting (several hours ahead) is particularly useful to mitigate the production variability by reducing the cost of power storage management. At this time scale, cloud cover evolves with a stochastic behaviour not properly represented in numerical weather prediction (NWP) models. Analysing cloud motion using images from geostationary meteorological satellites is a well-known alternative to forecasting SSI up to 6 hours ahead with a better accuracy than NWP models. In this study, we present and apply our satellite-based solar irradiance forecasting methods over two measurement sites located in the field of view of the satellite Himawari-8: Cocos (Keeling) Islands (Australia) and New Caledonia (France). In particular, we converted 4 months of images from Himawari-8 visible channel into cloud index maps. Then, we applied an algorithm computing a cloud motion vector field from a short sequence of consecutive images. Comparisons between forecasted SSI at 1 hour of time horizon and collocated pyranometric measurements show a relative RMSE between 20 and 27%. Error sources related to the tropic insular context (coastal area heterogeneity, sub-pixel scale orographic cloud appearance, convective situation…) are discussed at every implementation step for the different methods.

  9. Feature Extraction in Sequential Multimedia Images: with Applications in Satellite Images and On-line Videos

    Science.gov (United States)

    Liang, Yu-Li

    Multimedia data is increasingly important in scientific discovery and people's daily lives. Content of massive multimedia is often diverse and noisy, and motion between frames is sometimes crucial in analyzing those data. Among all, still images and videos are commonly used formats. Images are compact in size but do not contain motion information. Videos record motion but are sometimes too big to be analyzed. Sequential images, which are a set of continuous images with low frame rate, stand out because they are smaller than videos and still maintain motion information. This thesis investigates features in different types of noisy sequential images, and the proposed solutions that intelligently combined multiple features to successfully retrieve visual information from on-line videos and cloudy satellite images. The first task is detecting supraglacial lakes above ice sheet in sequential satellite images. The dynamics of supraglacial lakes on the Greenland ice sheet deeply affect glacier movement, which is directly related to sea level rise and global environment change. Detecting lakes above ice is suffering from diverse image qualities and unexpected clouds. A new method is proposed to efficiently extract prominent lake candidates with irregular shapes, heterogeneous backgrounds, and in cloudy images. The proposed system fully automatize the procedure that track lakes with high accuracy. We further cooperated with geoscientists to examine the tracked lakes and found new scientific findings. The second one is detecting obscene content in on-line video chat services, such as Chatroulette, that randomly match pairs of users in video chat sessions. A big problem encountered in such systems is the presence of flashers and obscene content. Because of various obscene content and unstable qualities of videos capture by home web-camera, detecting misbehaving users is a highly challenging task. We propose SafeVchat, which is the first solution that achieves satisfactory

  10. NOAA Geostationary Operational Environmental Satellite (GOES) Imager Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Geostationary Operational Environmental Satellite (GOES) series provides continuous measurements of the atmosphere and surface over the Western Hemisphere....

  11. NEPR World View 2 Satellite Mosaic - NOAA TIFF Image

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This GeoTiff is a mosaic of World View 2 panchromatic satellite imagery of Northeast Puerto Rico that contains the shallow water area (0-35m deep) surrounding...

  12. Building identification from very high-resolution satellite images

    Science.gov (United States)

    Lhomme, Stephane

    Urbanisation still remains one of the main problems worldwide. The extent and rapidity of the urban growth induce a number of socio-economic and environmental conflicts everywhere. In order to reduce these problems, urban planners need to integrate spatial information in planning tools. Actually high expectations are made on Very High Spatial Resolution imagery (VHSR). These high-spatial resolution images are available at a reasonable price and due to short revisit periods, they offer a high degree of actuality. However, interpretation methods seem not to be adapted to this new type of images. The aim of our study is to develop a new method for semi-automatic building extraction with VHSR. The different steps performed to achieve our objective are each presented in a chapter. In the first chapter, the general context of our research is described with the definition of our objective. After a short historical review of urbanisation, we focus on urban growth and associated problems. In the following we discuss the possible contributions of geography to reduce these problems. After discussing concepts, theories and methodologies of geographical analysis in urban areas, we present existing general urban planning tools. Finally, we show the special interest of our study that is due to a growing need to integrate spatial information in these decision support tools. In the second chapter we verify the possibility of reaching our objective by analysing the technical characteristics of the images, the noise and the distortions which affect the images. Quality and interpretability of the studied image is analysed in order to show the capacity of these image to represent urban objects as close to reality as possible. The results confirm the potential of VHSR Imagery for urban objects analysis. The third chapter deal with the preliminary steps necessary for the elaboration of our method of building extraction. First, we evaluate the quality of the Sherbrooke Ikonos image

  13. An Image-Based Sensor System for Autonomous Rendez-Vous with Uncooperative Satellites

    CERN Document Server

    Miravet, Carlos; Krouch, Eloise; del Cura, Juan Manuel

    2008-01-01

    In this paper are described the image processing algorithms developed by SENER, Ingenieria y Sistemas to cope with the problem of image-based, autonomous rendez-vous (RV) with an orbiting satellite. The methods developed have a direct application in the OLEV (Orbital Life Extension Extension Vehicle) mission. OLEV is a commercial mission under development by a consortium formed by Swedish Space Corporation, Kayser-Threde and SENER, aimed to extend the operational life of geostationary telecommunication satellites by supplying them control, navigation and guidance services. OLEV is planned to use a set of cameras to determine the angular position and distance to the client satellite during the complete phases of rendez-vous and docking, thus enabling the operation with satellites not equipped with any specific navigational aid to provide support during the approach. The ability to operate with un-equipped client satellites significantly expands the range of applicability of the system under development, compar...

  14. AUTOMATIC URBAN ILLEGAL BUILDING DETECTION USING MULTI-TEMPORAL SATELLITE IMAGES AND GEOSPATIAL INFORMATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    N. Khalili Moghadam

    2015-12-01

    Full Text Available With the unprecedented growth of urban population and urban development, we are faced with the growing trend of illegal building (IB construction. Field visit, as the currently used method of IB detection, is time and man power consuming, in addition to its high cost. Therefore, an automatic IB detection is required. Acquiring multi-temporal satellite images and using image processing techniques for automatic change detection is one of the optimum methods which can be used in IB monitoring. In this research an automatic method of IB detection has been proposed. Two-temporal panchromatic satellite images of IRS-P5 of the study area in a part of Tehran, the city map and an updated spatial database of existing buildings were used to detect the suspected IBs. In the pre-processing step, the images were geometrically and radiometrically corrected. In the next step, the changed pixels were detected using K-means clustering technique because of its quickness and less user’s intervention required. Then, all the changed pixels of each building were identified and the change percentage of each building with the standard threshold of changes was compared to detect the buildings which are under construction. Finally, the IBs were detected by checking the municipality database. The unmatched constructed buildings with municipal database will be field checked to identify the IBs. The results show that out of 343 buildings appeared in the images; only 19 buildings were detected as under construction and three of them as unlicensed buildings. Furthermore, the overall accuracies of 83%, 79% and 75% were obtained for K-means change detection, detection of under construction buildings and IBs detection, respectively.

  15. Revealing glacier flow and surge dynamics from animated satellite image sequences: examples from the Karakoram

    Science.gov (United States)

    Paul, F.

    2015-11-01

    Although animated images are very popular on the internet, they have so far found only limited use for glaciological applications. With long time series of satellite images becoming increasingly available and glaciers being well recognized for their rapid changes and variable flow dynamics, animated sequences of multiple satellite images reveal glacier dynamics in a time-lapse mode, making the otherwise slow changes of glacier movement visible and understandable to the wider public. For this study, animated image sequences were created for four regions in the central Karakoram mountain range over a 25-year time period (1990-2015) from freely available image quick-looks of orthorectified Landsat scenes. The animations play automatically in a web browser and reveal highly complex patterns of glacier flow and surge dynamics that are difficult to obtain by other methods. In contrast to other regions, surging glaciers in the Karakoram are often small (10 km2 or less), steep, debris-free, and advance for several years to decades at relatively low annual rates (about 100 m a-1). These characteristics overlap with those of non-surge-type glaciers, making a clear identification difficult. However, as in other regions, the surging glaciers in the central Karakoram also show sudden increases of flow velocity and mass waves travelling down glacier. The surges of individual glaciers are generally out of phase, indicating a limited climatic control on their dynamics. On the other hand, nearly all other glaciers in the region are either stable or slightly advancing, indicating balanced or even positive mass budgets over the past few decades.

  16. The Orbits of Saturn's Small Satellites Derived from Combined Historic and Cassini Imaging Observations

    Science.gov (United States)

    Spitale, J. N.; Jacobson, R. A.; Porco, C. C.; Owen, W. M., Jr.

    2006-08-01

    We report on the orbits of the small, inner Saturnian satellites, either recovered or newly discovered in recent Cassini imaging observations. The orbits presented here reflect improvements over our previously published values in that the time base of Cassini observations has been extended, and numerical orbital integrations have been performed in those cases in which simple precessing elliptical, inclined orbit solutions were found to be inadequate. Using combined Cassini and Voyager observations, we obtain an eccentricity for Pan 7 times smaller than previously reported because of the predominance of higher quality Cassini data in the fit. The orbit of the small satellite (S/2005 S1 [Daphnis]) discovered by Cassini in the Keeler gap in the outer A ring appears to be circular and coplanar; no external perturbations are apparent. Refined orbits of Atlas, Prometheus, Pandora, Janus, and Epimetheus are based on Cassini , Voyager, Hubble Space Telescope, and Earth-based data and a numerical integration perturbed by all the massive satellites and each other. Atlas is significantly perturbed by Prometheus, and to a lesser extent by Pandora, through high-wavenumber mean-motion resonances. Orbital integrations involving Atlas yield a mass of GMAtlas=(0.44+/-0.04)×10-3 km3 s -2, 3 times larger than reported previously (GM is the product of the Newtonian constant of gravitation G and the satellite mass M). Orbital integrations show that Methone is perturbed by Mimas, Pallene is perturbed by Enceladus, and Polydeuces librates around Dione's L5 point with a period of about 791 days. We report on the nature and orbits of bodies sighted in the F ring, two of which may have persisted for a year or more.

  17. Genetic Optimization for Associative Semantic Ranking Models of Satellite Images by Land Cover

    Directory of Open Access Journals (Sweden)

    Nil Kilicay-Ergin

    2013-06-01

    Full Text Available Associative methods for content-based image ranking by semantics are attractive due to the similarity of generated models to human models of understanding. Although they tend to return results that are better understood by image analysts, the induction of these models is difficult to build due to factors that affect training complexity, such as coexistence of visual patterns in same images, over-fitting or under-fitting and semantic representation differences among image analysts. This article proposes a methodology to reduce the complexity of ranking satellite images for associative methods. Our approach employs genetic operations to provide faster and more accurate models for ranking by semantic using low level features. The added accuracy is provided by a reduction in the likelihood to reach local minima or to overfit. The experiments show that, using genetic optimization, associative methods perform better or at similar levels as state-of-the-art ensemble methods for ranking. The mean average precision (MAP of ranking by semantic was improved by 14% over similar associative methods that use other optimization techniques while maintaining smaller size for each semantic model.

  18. Experimental research on showing automatic disappearance pen handwriting based on spectral imaging technology

    Science.gov (United States)

    Su, Yi; Xu, Lei; Liu, Ningning; Huang, Wei; Xu, Xiaojing

    2016-10-01

    Purpose to find an efficient, non-destructive examining method for showing the disappearing words after writing with automatic disappearance pen. Method Using the imaging spectrometer to show the potential disappearance words on paper surface according to different properties of reflection absorbed by various substances in different bands. Results the disappeared words by using different disappearance pens to write on the same paper or the same disappearance pen to write on different papers, both can get good show results through the use of the spectral imaging examining methods. Conclusion Spectral imaging technology can show the disappearing words after writing by using the automatic disappearance pen.

  19. Autonomous Sub-Pixel Satellite Track Endpoint Determination for Space Based Images

    Energy Technology Data Exchange (ETDEWEB)

    Simms, L M

    2011-03-07

    An algorithm for determining satellite track endpoints with sub-pixel resolution in spaced-based images is presented. The algorithm allows for significant curvature in the imaged track due to rotation of the spacecraft capturing the image. The motivation behind the subpixel endpoint determination is first presented, followed by a description of the methodology used. Results from running the algorithm on real ground-based and simulated spaced-based images are shown to highlight its effectiveness.

  20. Cadastral Resurvey using High Resolution Satellite Ortho Image - challenges: A case study in Odisha, India

    Science.gov (United States)

    Parida, P. K.; Sanabada, M. K.; Tripathi, S.

    2014-11-01

    Advancements in satellite sensor technology enabling capturing of geometrically accurate images of earth's surface coupled with DGPS/ETS and GIS technology holds the capability of large scale mapping of land resources at cadastral level. High Resolution Satellite Images depict field bunds distinctly. Thus plot parcels are to be delineated from cloud free ortho-images and obscured/difficult areas are to be surveyed using DGPS and ETS. The vector datasets thus derived through RS/DGPS/ETS survey are to be integrated in GIS environment to generate the base cadastral vector datasets for further settlement/title confirmation activities. The objective of this paper is to illustrate the efficacy of a hybrid methodology employed in Pitambarpur Sasana village under Digapahandi Tahasil of Ganjam district, as a pilot project, particularly in Odisha scenario where the land parcel size is very small. One of the significant observations of the study is matching of Cadastral map area i.e. 315.454 Acres, the image map area i.e. 314.887 Acres and RoR area i.e. 313.815 Acre. It was revealed that 79 % of plots derived by high-tech survey method show acceptable level of accuracy despite the fact that the mode of area measurement by ground and automated method has significant variability. The variations are more in case of Government lands, Temple/Trust lands, Common Property Resources and plots near to river/nalas etc. The study indicates that the adopted technology can be extended to other districts and cadastral resurvey and updating work can be done for larger areas of the country using this methodology.

  1. Wildfire monitoring using satellite images, ontologies and linked geospatial data

    NARCIS (Netherlands)

    Kyzirakos, K.; Karpathiotakis, M.; Garbis, G.; Nikolaou, C.; Bereta, K.; Papoutsis, I.; Herekakis, T.; Michail, D.; Koubarakis, M.; Kontoes, C.

    2014-01-01

    Advances in remote sensing technologies have allowed us to send an ever-increasing number of satellites in orbit around Earth. As a result, Earth Observation data archives have been constantly increasing in size in the last few years, and have become a valuable source of data for many scientific and

  2. Remote sensing place : Satellite images as visual spatial imaginaries

    NARCIS (Netherlands)

    Shim, David

    How do people come to know the world? How do they get a sense of place and space? Arguably, one of the ways in which they do this is through the practice of remote sensing, among which satellite imagery is one of the most widespread and potent tools of engaging, representing and constructing space.

  3. Fast Fractal Compression of Satellite and Medical Images Based on Domain-Range Entropy

    Directory of Open Access Journals (Sweden)

    Ramesh Babu Inampudi

    2010-01-01

    Full Text Available Fractal image Compression is a lossy compression technique developed in the early 1990s. It makes use of the local self-similarity property existing in an image and finds a contractive mapping affine transformation (fractal transformT, such that the fixed point of T is close to the given image in a suitable metric. It has generated much interest due to its promise of high compression ratios with good decompression quality. The other advantage is its multi resolution property, i.e. an image can be decoded at higher or lower resolutions than the original without much degradation in quality. However, the encoding time is computationally intensive. In this paper, a fast fractal image compression method based on the domain-range entropy is proposed to reduce the encoding time, while maintaining the fidelity and compression ratio of the decoded image. The method is a two-step process. First, domains that are similar i.e. domains having nearly equal variances are eliminated from the domain pool. Second, during the encoding phase, only domains and ranges having equal entropies (with an adaptive error threshold, λdepth for each quadtree depth are compared for a match within the rms error tolerance. As a result, many unqualified domains are removed from comparison and a significant reduction in encoding time is expected. The method is applied for compression of satellite and medical images (512x512, 8-bit gray scale. Experimental results show that the proposed method yields superior performance over Fisher’s classified search and other methods.

  4. Multispectral Snapshot Imagers Onboard Small Satellite Formations for Multi-Angular Remote Sensing

    Science.gov (United States)

    Nag, Sreeja; Hewagama, Tilak; Georgiev, Georgi; Pasquale, Bert; Aslam, Shahid; Gatebe, Charles K.

    2017-01-01

    Multispectral snapshot imagers are capable of producing 2D spatial images with a single exposure at selected, numerous wavelengths using the same camera, therefore operate differently from push broom or whiskbroom imagers. They are payloads of choice in multi-angular, multi-spectral imaging missions that use small satellites flying in controlled formation, to retrieve Earth science measurements dependent on the targets Bidirectional Reflectance-Distribution Function (BRDF). Narrow fields of view are needed to capture images with moderate spatial resolution. This paper quantifies the dependencies of the imagers optical system, spectral elements and camera on the requirements of the formation mission and their impact on performance metrics such as spectral range, swath and signal to noise ratio (SNR). All variables and metrics have been generated from a comprehensive, payload design tool. The baseline optical parameters selected (diameter 7 cm, focal length 10.5 cm, pixel size 20 micron, field of view 1.15 deg) and snapshot imaging technologies are available. The spectral components shortlisted were waveguide spectrometers, acousto-optic tunable filters (AOTF), electronically actuated Fabry-Perot interferometers, and integral field spectrographs. Qualitative evaluation favored AOTFs because of their low weight, small size, and flight heritage. Quantitative analysis showed that waveguide spectrometers perform better in terms of achievable swath (10-90 km) and SNR (greater than 20) for 86 wavebands, but the data volume generated will need very high bandwidth communication to downlink. AOTFs meet the external data volume caps well as the minimum spectral (wavebands) and radiometric (SNR) requirements, therefore are found to be currently feasible in spite of lower swath and SNR.

  5. Object Based and Pixel Based Classification Using Rapideye Satellite Imager of ETI-OSA, Lagos, Nigeria

    Directory of Open Access Journals (Sweden)

    Esther Oluwafunmilayo Makinde

    2016-12-01

    Full Text Available Several studies have been carried out to find an appropriate method to classify the remote sensing data. Traditional classification approaches are all pixel-based, and do not utilize the spatial information within an object which is an important source of information to image classification. Thus, this study compared the pixel based and object based classification algorithms using RapidEye satellite image of Eti-Osa LGA, Lagos. In the object-oriented approach, the image was segmented to homogenous area by suitable parameters such as scale parameter, compactness, shape etc. Classification based on segments was done by a nearest neighbour classifier. In the pixel-based classification, the spectral angle mapper was used to classify the images. The user accuracy for each class using object based classification were 98.31% for waterbody, 92.31% for vegetation, 86.67% for bare soil and 90.57% for Built up while the user accuracy for the pixel based classification were 98.28% for waterbody, 84.06% for Vegetation 86.36% and 79.41% for Built up. These classification techniques were subjected to accuracy assessment and the overall accuracy of the Object based classification was 94.47%, while that of Pixel based classification yielded 86.64%. The result of classification and accuracy assessment show that the object-based approach gave more accurate and satisfying results

  6. Some Methodological Aspects Concerning the Use of Satellite Images and Maps in the Physico-Geographical Regional Determination of the Romania Territory

    Directory of Open Access Journals (Sweden)

    VASILE LOGHIN

    2005-01-01

    Full Text Available This paper presents some methodological aspects concerning the use of satellite images and maps in the physico-geographical region determination of Romania's territory, as well as some results that can be obtained using this method. In order to determine the physico-geographical units and sub-units using satellite maps (Bucharest page, 1:1.500.000 and satellite images (Landsat, IRS we have analyzed, from the geographical point of view, some samples of such documents. The resulting maps were compared with the already existing physico-geographical region determination maps. Our results show that the method under consideration has both advantages and disadvantages. One conclusion is sure: satellite images and maps can be used for this purpose together with traditional maps.

  7. Higher resolution satellite remote sensing and the impact on image mapping

    Science.gov (United States)

    Watkins, Allen H.; Thormodsgard, June M.

    1987-01-01

    Recent advances in spatial, spectral, and temporal resolution of civil land remote sensing satellite data are presenting new opportunities for image mapping applications. The U.S. Geological Survey's experimental satellite image mapping program is evolving toward larger scale image map products with increased information content as a result of improved image processing techniques and increased resolution. Thematic mapper data are being used to produce experimental image maps at 1:100,000 scale that meet established U.S. and European map accuracy standards. Availability of high quality, cloud-free, 30-meter ground resolution multispectral data from the Landsat thematic mapper sensor, along with 10-meter ground resolution panchromatic and 20-meter ground resolution multispectral data from the recently launched French SPOT satellite, present new cartographic and image processing challenges. The need to fully exploit these higher resolution data increases the complexity of processing the images into large-scale image maps. The removal of radiometric artifacts and noise prior to geometric correction can be accomplished by using a variety of image processing filters and transforms. Sensor modeling and image restoration techniques allow maximum retention of spatial and radiometric information. An optimum combination of spectral information and spatial resolution can be obtained by merging different sensor types. These processing techniques are discussed and examples are presented. 

  8. Higher resolution satellite remote sensing and the impact on image mapping

    Science.gov (United States)

    Watkins, Allen H.; Thormodsgard, June M.

    Recent advances in spatial, spectral, and temporal resolution of civil land remote sensing satellite data are presenting new opportunities for image mapping applications. The U.S. Geological Survey's experimental satellite image mapping program is evolving toward larger scale image map products with increased information content as a result of improved image processing techniques and increased resolution. Thematic mapper data are being used to produce experimental image maps at 1:100,000 scale that meet established U.S. and European map accuracy standards. Availability of high quality, cloud-free, 30-meter ground resolution multispectral data from the Landsat thematic mapper sensor, along with 10-meter ground resolution panchromatic and 20-meter ground resolution multispectral data from the recently launched French SPOT satellite, present new cartographic and image processing challenges. The need to fully exploit these higher resolution data increases the complexity of processing the images into large-scale image maps. The removal of radiometric artifacts and noise prior to geometric correction can be accomplished by using a variety of image processing filters and transforms. Sensor modeling and image restoration techniques allow maximum retention of spatial and radiometric information. An optimum combination of spectral information and spatial resolution can be obtained by merging different sensor types. These processing techniques are discussed and examples are presented.

  9. AUTOMATED CONSTRUCTION OF COVERAGE CATALOGUES OF ASTER SATELLITE IMAGE FOR URBAN AREAS OF THE WORLD

    Directory of Open Access Journals (Sweden)

    H. Miyazaki

    2012-07-01

    Full Text Available We developed an algorithm to determine a combination of satellite images according to observation extent and image quality. The algorithm was for testing necessity for completing coverage of the search extent. The tests excluded unnecessary images with low quality and preserve necessary images with good quality. The search conditions of the satellite images could be extended, indicating the catalogue could be constructed with specified periods required for time series analysis. We applied the method to a database of metadata of ASTER satellite images archived in GEO Grid of National Institute of Advanced Industrial Science and Technology (AIST, Japan. As indexes of populated places with geographical coordinates, we used a database of 3372 populated place of more than 0.1 million populations retrieved from GRUMP Settlement Points, a global gazetteer of cities, which has geographical names of populated places associated with geographical coordinates and population data. From the coordinates of populated places, 3372 extents were generated with radiuses of 30 km, a half of swath of ASTER satellite images. By merging extents overlapping each other, they were assembled into 2214 extents. As a result, we acquired combinations of good quality for 1244 extents, those of low quality for 96 extents, incomplete combinations for 611 extents. Further improvements would be expected by introducing pixel-based cloud assessment and pixel value correction over seasonal variations.

  10. The Compact High Resolution Imaging Spectrometer (CHRIS): the future of hyperspectral satellite sensors. Imagery of Oostende coastal and inland waters

    OpenAIRE

    B. De Mol; Ruddick, K

    2004-01-01

    The gap between airborne imaging spectroscopy and traditional multi spectral satellite sensors is decreasing thanks to a new generation of satellite sensors of which CHRIS mounted on the small and low-cost PROBA satellite is the prototype. Although image acquisition and analysis are still in a test phase, the high spatial and spectral resolution and pointability have proved their potential. Because of the high resolution small features, which were before only visible on airborne images, becom...

  11. Adaptive Optics for Satellite and Debris Imaging in LEO and GEO

    Science.gov (United States)

    Copeland, M.; Bennet, F.; Zovaro, A.; Riguat, F.; Piatrou, P.; Korkiakoski, V.; Smith, C.

    2016-09-01

    The Research School of Astronomy and Astrophysics (RSAA) at the Australian National University has developed and Adaptive Optics (AO) system for satellite and debris imaging in low Earth orbit (LEO) and geostationary orbit (GEO). In LEO the size, shape and orientation of objects will be measured with resolution of 50 cm for objects at 800 km range at an 800 nm imaging wavelength. In GEO satellite position will be measured using precision astrometry of nearby stars. We use an AO system with a deformable mirror (DM) of 277 actuators and Shack-Hartmann wavefront sensor operating at 2 kHz. Imaging is performed at a rate of >30 Hz to reduce image blur due to tip-tilt and rotation. We use two imaging modes; a high resolution mode to obtain Nyquist sampled images and a acquisition mode with 75 arcsecond field of view to aid in finding targets.

  12. Biomass prediction model in maize based on satellite images

    Science.gov (United States)

    Mihai, Herbei; Florin, Sala

    2016-06-01

    Monitoring of crops by satellite techniques is very useful in the context of precision agriculture, regarding crops management and agricultural production. The present study has evaluated the interrelationship between maize biomass production and satellite indices (NDVI and NDBR) during five development stages (BBCH code), highlighting different levels of correlation. Biomass production recorded was between 2.39±0.005 t ha-1 (12-13 BBCH code) and 51.92±0.028 t ha-1 (83-85 BBCH code), in relation to vegetation stages studied. Values of chlorophyll content ranged from 24.1±0.25 SPAD unit (12-13 BBCH code) to 58.63±0.47 SPAD unit (71-73 BBCH code), and the obtained satellite indices ranged from 0.035641±0.002 and 0.320839±0.002 for NDVI indices respectively 0.035095±0.034 and 0.491038±0.018 in the case of NDBR indices. By regression analysis it was possible to obtain predictive models of biomass in maize based on the satellite indices, in statistical accurate conditions. The most accurate prediction was possible based on NDBR index (R2 = 0.986, F = 144.23, p<0.001, RMSE = 1.446), then based on chlorophyll content (R2 = 0.834, F = 16.14, p = 0.012, RMSE = 6.927) and NDVI index (R2 = 0.682, F = 3.869, p = 0.116, RMSE = 12.178).

  13. Nightfire method to track volcanic eruptions from multispectral satellite images

    Science.gov (United States)

    Trifonov, Grigory; Zhizhin, Mikhail; Melnikov, Dmitry

    2016-04-01

    This work presents the first results of an application of the Nightfire hotspot algorithm towards volcano activity detection. Nightfire algorithm have been developed to play along with a Suomi-NPP polar satellite launched in 2011, which has a new generation multispectral VIIRS thermal sensor on board, to detect gas flares related to the upstream and downstream production of oil and natural gas. Simultaneously using of nighttime data in SWIR, MWIR, and LWIR sensor bands the algorithm is able to estimate the hotspot temperature, size and radiant heat. Four years of non-filtered observations have been accumulated in a spatio-temporal detection database, which currently totals 125 GB in size. The first part of this work presents results of retrospective cross-match of the detection database with the publicly available observed eruptions databases. The second part discusses how an approximate 3D shape of a lava lake could be modeled based on the apparent source size and satellite zenith angle. The third part presents the results of fusion Landsat-8 and Himawari-8 satellites data with the VIIRS Nightfire for several active volcanoes.

  14. Updating Object for GIS Database Information Using High Resolution Satellite Images: a Case Study Zonguldak

    Science.gov (United States)

    Alkan, M.; Arca, D.; Bayik, Ç.; Marangoz, A. M.

    2011-09-01

    Nowadays Geographic Information Systems (GIS) uses Remote Sensing (RS) data for a lot of applications. One of the application areas is the updating of the GIS database using high resolution imagery. In this context high resolution satellite imagery data is very important for many applications areas today's and future. And also, high resolution satellite imagery data will be used in many applications for different purposes. Information systems needs to high resolution imagery data for updating. Updating is very important component for the any of the GIS systems. One of this area will be updated and kept alive GIS database information. High resolution satellite imagery is used with different data base which serve map information via internet and different aims of information systems applications in future topographic and cartographic information systems will very important in our country in this sense use of the satellite images will be unavoidable. In this study explain to how is acquired to satellite images and how is use this images in information systems for object and roads. Firstly, pan-sharpened two of the IKONOS's images have been produced by fusion of high resolution PAN and MS images using PCI Geomatica v9.1 software package. Automatic object extraction has been made using eCognition v4.0.6. On the other hand, these objects have been manually digitized from high resolution images using ArcGIS v9.3. software package. Application section of in this study, satellite images data will be compared each other and GIS objects and road database. It is also determined which data is useful in Geographic Information Systems. Finally, this article explains that integration of remote sensing technology and GIS applications.

  15. Trend Assessment of Spatio-Temporal Change of Tehran Heat Island Using Satellite Images

    Science.gov (United States)

    Saradjian, M. R.; Sherafati, Sh.

    2015-12-01

    Numerous investigations on Urban Heat Island (UHI) show that land cover change is the main factor of increasing Land Surface Temperature (LST) in urban areas, especially conversion of vegetation and bare soil to concrete, asphalt and other man-made structures. On the other hand, other human activities like those which cause to burning fossil fuels, that increase the amount of carbon dioxide, may raise temperature in global scale in comparison with small scales (urban areas). In this study, multiple satellite images with different spatial and temporal resolutions have been used to determine Land Surface Temperature (LST) variability in Tehran metropolitan area. High temporal resolution of AVHRR images have been used as the main data source when investigating temperature variability in the urban area. The analysis shows that UHI appears more significant at afternoon and night hours. But the urban class temperature is almost equal to its surrounding vegetation and bare soil classes at around noon. It also reveals that there is no specific difference in UHI intense during the days throughout the year. However, it can be concluded that in the process of city expansion in years, UHI has been grown both spatially and in magnitude. In order to locate land-cover types and relate them to LST, Thematic Mapper (TM) images have been exploited. The influence of elevation on the LST has also been studied, using digital elevation model derived from SRTM database.

  16. TREND ASSESSMENT OF SPATIO-TEMPORAL CHANGE OF TEHRAN HEAT ISLAND USING SATELLITE IMAGES

    Directory of Open Access Journals (Sweden)

    M. R. Saradjian

    2015-12-01

    Full Text Available Numerous investigations on Urban Heat Island (UHI show that land cover change is the main factor of increasing Land Surface Temperature (LST in urban areas, especially conversion of vegetation and bare soil to concrete, asphalt and other man-made structures. On the other hand, other human activities like those which cause to burning fossil fuels, that increase the amount of carbon dioxide, may raise temperature in global scale in comparison with small scales (urban areas. In this study, multiple satellite images with different spatial and temporal resolutions have been used to determine Land Surface Temperature (LST variability in Tehran metropolitan area. High temporal resolution of AVHRR images have been used as the main data source when investigating temperature variability in the urban area. The analysis shows that UHI appears more significant at afternoon and night hours. But the urban class temperature is almost equal to its surrounding vegetation and bare soil classes at around noon. It also reveals that there is no specific difference in UHI intense during the days throughout the year. However, it can be concluded that in the process of city expansion in years, UHI has been grown both spatially and in magnitude. In order to locate land-cover types and relate them to LST, Thematic Mapper (TM images have been exploited. The influence of elevation on the LST has also been studied, using digital elevation model derived from SRTM database.

  17. Satellite Imagery Cadastral Features Extractions using Image Processing Algorithms: A Viable Option for Cadastral Science

    Directory of Open Access Journals (Sweden)

    Usman Babawuro

    2012-07-01

    Full Text Available Satellite images are used for feature extraction among other functions. They are used to extract linear features, like roads, etc. These linear features extractions are important operations in computer vision. Computer vision has varied applications in photogrammetric, hydrographic, cartographic and remote sensing tasks. The extraction of linear features or boundaries defining the extents of lands, land covers features are equally important in Cadastral Surveying. Cadastral Surveying is the cornerstone of any Cadastral System. A two dimensional cadastral plan is a model which represents both the cadastral and geometrical information of a two dimensional labeled Image. This paper aims at using and widening the concepts of high resolution Satellite imagery data for extracting representations of cadastral boundaries using image processing algorithms, hence minimizing the human interventions. The Satellite imagery is firstly rectified hence establishing the satellite imagery in the correct orientation and spatial location for further analysis. We, then employ the much available Satellite imagery to extract the relevant cadastral features using computer vision and image processing algorithms. We evaluate the potential of using high resolution Satellite imagery to achieve Cadastral goals of boundary detection and extraction of farmlands using image processing algorithms. This method proves effective as it minimizes the human demerits associated with the Cadastral surveying method, hence providing another perspective of achieving cadastral goals as emphasized by the UN cadastral vision. Finally, as Cadastral science continues to look to the future, this research aimed at the analysis and getting insights into the characteristics and potential role of computer vision algorithms using high resolution satellite imagery for better digital Cadastre that would provide improved socio economic development.

  18. Object Based and Pixel Based Classification Using Rapideye Satellite Imager of ETI-OSA, Lagos, Nigeria

    OpenAIRE

    Esther Oluwafunmilayo Makinde; Ayobami Taofeek Salami; James Bolarinwa Olaleye; Oluwapelumi Comfort Okewusi

    2016-01-01

    Several studies have been carried out to find an appropriate method to classify the remote sensing data. Traditional classification approaches are all pixel-based, and do not utilize the spatial information within an object which is an important source of information to image classification. Thus, this study compared the pixel based and object based classification algorithms using RapidEye satellite image of Eti-Osa LGA, Lagos. In the object-oriented approach, the image was segmented to homog...

  19. Automatic Open Space Area Extraction and Change Detection from High Resolution Urban Satellite Images

    CERN Document Server

    Kodge, B G

    2011-01-01

    In this paper, we study efficient and reliable automatic extraction algorithm to find out the open space area from the high resolution urban satellite imagery, and to detect changes from the extracted open space area during the period 2003, 2006 and 2008. This automatic extraction and change detection algorithm uses some filters, segmentation and grouping that are applied on satellite images. The resultant images may be used to calculate the total available open space area and the built up area. It may also be used to compare the difference between present and past open space area using historical urban satellite images of that same projection, which is an important geo spatial data management application.

  20. Crop classification using multi-temporal HJ satellite images: case study in Kashgar, Xinjiang

    Science.gov (United States)

    Hao, Pengyu; Niu, Zheng; Wang, Li

    2014-11-01

    The HJ satellite constellation, characterized as high temporal resolution (4 day revisit frequency), has high potential to obtain cloud-free images covering all cruel periods for crop classification during growing season. In this paper, three HJ images (in May, July and September) were acquired, the performances of different multi-spectral HJ CCD data combinations for crop classification in Kashgar, Xinjiang were estimated using library for Support Vector Machine (LIBSVM), and ground reference data obtained in 2011 field work were used as training and validation samples. The result showed that multi-temporal HJ data has a potential to classify crops with an overall classification accuracy of 93.77%. Among the three time periods utilized in this research, the image acquired in July achieved the highest overall accuracy (86.98%) because all summer crops were under dense canopy closure. Cotton could be accurately extracted in May image (both user and produce accuracy are above 90%) because of its lower canopy closure compared with spring, the rotate crop (wheat_maize) and winter crop (wheat) at the time period. Then, the July and September combination performed as good as that of all threetime- period combination, which indicated that images obtained at cruel time periods are enough to identify crops, and the additional images improve little on classification accuracy. In addition, multi-temporal NDVI in cruel time periods of the growing season is testified efficient to classify crops with significant phenonlogical variances since they achieved similar overall accuracy to that of multi-temporal multi-spectral combination.

  1. Target Matching Recognition for Satellite Images Based on the Improved FREAK Algorithm

    Directory of Open Access Journals (Sweden)

    Yantong Chen

    2016-01-01

    Full Text Available Satellite remote sensing image target matching recognition exhibits poor robustness and accuracy because of the unfit feature extractor and large data quantity. To address this problem, we propose a new feature extraction algorithm for fast target matching recognition that comprises an improved feature from accelerated segment test (FAST feature detector and a binary fast retina key point (FREAK feature descriptor. To improve robustness, we extend the FAST feature detector by applying scale space theory and then transform the feature vector acquired by the FREAK descriptor from decimal into binary. We reduce the quantity of data in the computer and improve matching accuracy by using the binary space. Simulation test results show that our algorithm outperforms other relevant methods in terms of robustness and accuracy.

  2. Contrail frequency over Europe from NOAA-satellite images

    Directory of Open Access Journals (Sweden)

    V. Gayler

    Full Text Available Contrail cloudiness over Europe and the eastern part of the North Atlantic Ocean was analyzed for the two periods September 1979 - December 1981 and September 1989 - August 1992 by visual inspection of quicklook photographic prints of NOAA/AVHRR infrared images. The averaged contrail cover exhibits maximum values along the transatlantic flight corridor around 50 °N (of almost 2% and over western Europe resulting in 0.5% contrail cloudiness on average. A strong yearly cycle appears with a maximum (<2% in spring and summer over the Atlantic and a smaller maximum (<1% in winter over southwestern Europe. Comparing the two time periods, which are separated by one decade, shows there is a significant decrease in contrail cloudiness over western Europe and a significant increase over the North Atlantic between March and July. Contrail cloud cover during daytime is about twice as high as during nighttime. Contrails are found preferentially in larger fields of 1000 km diameter which usually last for more than a day. Causes, possible errors and consequences are discussed.

  3. Contrail frequency over Europe from NOAA-satellite images

    Science.gov (United States)

    Bakan, S.; Betancor, M.; Gayler, V.; Graßl, H.

    1994-10-01

    Contrail cloudiness over Europe and the eastern part of the North Atlantic Ocean was analyzed for the two periods September 1979 - December 1981 and September 1989 - August 1992 by visual inspection of quicklook photographic prints of NOAA/AVHRR infrared images. The averaged contrail cover exhibits maximum values along the transatlantic flight corridor around 50 °N (of almost 2%) and over western Europe resulting in 0.5% contrail cloudiness on average. A strong yearly cycle appears with a maximum (<2%) in spring and summer over the Atlantic and a smaller maximum (<1%) in winter over southwestern Europe. Comparing the two time periods, which are separated by one decade, shows there is a significant decrease in contrail cloudiness over western Europe and a significant increase over the North Atlantic between March and July. Contrail cloud cover during daytime is about twice as high as during nighttime. Contrails are found preferentially in larger fields of 1000 km diameter which usually last for more than a day. Causes, possible errors and consequences are discussed.

  4. Neural Network Change Detection Model for Satellite Images Using Textural and Spectral Characteristics

    Directory of Open Access Journals (Sweden)

    A. K. Helmy

    2010-01-01

    Full Text Available Problem statement: Change detection is the process of identifying difference of the state of an object or phenomena by observing it at different time. Essentially, it involves the ability to quantify temporal effects using multi-temporal data sets. Information about change is necessary for evaluating land cover and the management of natural resources. Approach: A neural network model based on both spectral and textural analysis is developed. Change detection system in this study is presented using modified version of back-propagation-training algorithm with dynamic learning rate and momentum. Through proposed model, the two images at different dates are fed into the input layer of neural network, in addition with Variance, Skewness and Eculedian for each image that represent different texture measure. This leads to better discrimination process. Results: The results showed that the trained network with texture measures achieve 23% higher accuracy than that without textural parameters. Conclusion: Adding textural parameters of satellite images through training phase increases the efficiently of change detection process also, it provides adequate information about the type of changes. It also found, when using dynamic momentum and learning rate, time and effort needed to select their appropriate value is reduced.

  5. Flood hazard and flood risk assessment using a time series of satellite images: a case study in Namibia.

    Science.gov (United States)

    Skakun, Sergii; Kussul, Nataliia; Shelestov, Andrii; Kussul, Olga

    2014-08-01

    In this article, the use of time series of satellite imagery to flood hazard mapping and flood risk assessment is presented. Flooded areas are extracted from satellite images for the flood-prone territory, and a maximum flood extent image for each flood event is produced. These maps are further fused to determine relative frequency of inundation (RFI). The study shows that RFI values and relative water depth exhibit the same probabilistic distribution, which is confirmed by Kolmogorov-Smirnov test. The produced RFI map can be used as a flood hazard map, especially in cases when flood modeling is complicated by lack of available data and high uncertainties. The derived RFI map is further used for flood risk assessment. Efficiency of the presented approach is demonstrated for the Katima Mulilo region (Namibia). A time series of Landsat-5/7 satellite images acquired from 1989 to 2012 is processed to derive RFI map using the presented approach. The following direct damage categories are considered in the study for flood risk assessment: dwelling units, roads, health facilities, and schools. The produced flood risk map shows that the risk is distributed uniformly all over the region. The cities and villages with the highest risk are identified. The proposed approach has minimum data requirements, and RFI maps can be generated rapidly to assist rescuers and decisionmakers in case of emergencies. On the other hand, limitations include: strong dependence on the available data sets, and limitations in simulations with extrapolated water depth values.

  6. Gemini Planet Imager Observational Calibrations VIII: Characterization and Role of Satellite Spots

    CERN Document Server

    Wang, Jason J; Graham, James R; Savransky, Dmitry; Ingraham, Patrick J; Ward-Duong, Kimberly; Patience, Jennifer; De Rosa, Robert J; Bulger, Joanna; Sivaramakrishnan, Anand; Perrin, Marshall D; Thomas, Sandrine J; Sadakuni, Naru; Greenbaum, Alexandra Z; Pueyo, Laurent; Marois, Christian; Oppenheimer, Ben R; Kalas, Paul; Cardwell, Andrew; Goodsell, Stephen; Hibon, Pascale; Rantakyrö, Fredrik T

    2014-01-01

    The Gemini Planet Imager (GPI) combines extreme adaptive optics, an integral field spectrograph, and a high performance coronagraph to directly image extrasolar planets in the near-infrared. Because the coronagraph blocks most of the light from the star, it prevents the properties of the host star from being measured directly. Instead, satellite spots, which are created by diffraction from a square grid in the pupil plane, can be used to locate the star and extract its spectrum. We describe the techniques implemented into the GPI Data Reduction Pipeline to measure the properties of the satellite spots and discuss the precision of the reconstructed astrometry and spectrophotometry of the occulted star. We find the astrometric precision of the satellite spots in an $H$-band datacube to be $0.05$ pixels and is best when individual satellite spots have a signal to noise ratio (SNR) of $> 20$. In regards to satellite spot spectrophotometry, we find that the total flux from the satellite spots is stable to $\\sim 7\\...

  7. GPU Accelerated Automated Feature Extraction From Satellite Images

    Directory of Open Access Journals (Sweden)

    K. Phani Tejaswi

    2013-04-01

    Full Text Available The availability of large volumes of remote sensing data insists on higher degree of automation in featureextraction, making it a need of thehour. Fusingdata from multiple sources, such as panchromatic,hyperspectraland LiDAR sensors, enhances the probability of identifying and extracting features such asbuildings, vegetation or bodies of water by using a combination of spectral and elevation characteristics.Utilizing theaforementioned featuresin remote sensing is impracticable in the absence ofautomation.Whileefforts are underway to reduce human intervention in data processing, this attempt alone may notsuffice. Thehuge quantum of data that needs to be processed entailsaccelerated processing to be enabled.GPUs, which were originally designed to provide efficient visualization,arebeing massively employed forcomputation intensive parallel processing environments. Image processing in general and hence automatedfeatureextraction, is highly computation intensive, where performance improvements have a direct impacton societal needs. In this context, an algorithm has been formulated for automated feature extraction froma panchromatic or multispectral image based on image processing techniques.Two Laplacian of Guassian(LoGmasks were applied on the image individually followed by detection of zero crossing points andextracting the pixels based on their standard deviationwiththe surrounding pixels. The two extractedimages with different LoG masks were combined together which resulted in an image withthe extractedfeatures and edges.Finally the user is at liberty to apply the image smoothing step depending on the noisecontent in the extracted image.The image ispassed through a hybrid median filter toremove the salt andpepper noise from the image.This paper discusses theaforesaidalgorithmforautomated featureextraction, necessity of deployment of GPUs for thesame;system-level challenges and quantifies thebenefits of integrating GPUs in such environment. The

  8. Soil moisture and evapotranspiration of wetlands vegetation habitats retrieved from satellite images

    Science.gov (United States)

    Dabrowska-Zielinska, K.; Budzynska, M.; Kowalik, W.; Turlej, K.

    2010-08-01

    The research has been carried out in Biebrza Ramsar Convention test site situated in the N-E part of Poland. Data from optical and microwave satellite images have been analysed and compared to the detailed soil-vegetation ground truth measurements conducted during the satellite overpasses. Satellite data applied for the study include: ENVISAT.ASAR, ENVISAT.MERIS, ALOS.PALSAR, ALOS.AVNIR-2, ALOS.PRISM, TERRA.ASTER, and NOAA.AVHRR. Optical images have been used for classification of wetlands vegetation habitats and vegetation surface roughness expressed by LAI. Also, heat fluxes have been calculated using NOAA.AVHRR data and meteorological data. Microwave images have been used for the assessment of soil moisture. For each of the classified wetlands vegetation habitats the relationship between soil moisture and backscattering coefficient has been examined, and the best combination of microwave variables (wave length, incidence angle, polarization) has been used for mapping and monitoring of soil moisture. The results of this study give possibility to improve models of water cycle over wetlands ecosystems by adding information about soil moisture and surface heat fluxes derived from satellite images. Such information is very essential for better protection of the European sensitive wetland ecosystems. ENVISAT and ALOS images have been obtained from ESA for AO ID 122 and AOALO.3742 projects.

  9. Detecting aircrafts from satellite images using saliency and conical pyramid based template representation

    Indian Academy of Sciences (India)

    SAMIK BANERJEE; NITIN GUPTA; SUKHENDU DAS; PINAKI ROY CHOWDHURY; L K SINHA

    2016-10-01

    Automatic target localization in satellite images still remains as a challenging problem in the field of computer vision. The issues involved in locating targets in satellite images are viewpoint, spectral (intensity) and scale variations. Diversity in background texture and target clutter also adds up to the complexity of the problem of localizing aircrafts in satellite images. Failure of modern feature extraction and object detection methods highlight the complexity of the problem. In the proposed work, pre-processing techniques, viz.denoising and contrast enhancement, are first used to improve the quality of the images. Then, the concept of unsupervised saliency is used to detect the potential regions of interest, which reduces the search space. Parts from the salient regions are further processed using clustering and morphological processing to get the probable regions of isolated aircraft targets. Finally, a novel conical pyramid based framework for template representation of the target samples is proposed for matching. Experimental results shown on a few satellite images exhibit the superior performance of the proposed methods.

  10. Optimization of post-classification processing of high-resolution satellite image: A case study

    Institute of Scientific and Technical Information of China (English)

    DONG; Rencai; DONG; Jiajia; WU; Gang; DENG; Hongbing

    2006-01-01

    The application of remote sensing monitoring techniques plays a crucial role in evaluating and governing the vast amount of ecological construction projects in China. However, extracting information of ecological engineering target through high-resolution satellite image is arduous due to the unique topography and complicated spatial pattern on the Loess Plateau of China. As a result, enhancing classification accuracy is a huge challenge to high-resolution image processing techniques. Image processing techniques have a definitive effect on image properties and the selection of different parameters may change the final classification accuracy during post-classification processing. The common method of eliminating noise and smoothing image is majority filtering. However, the filter function may modify the original classified image and the final accuracy. The aim of this study is to develop an efficient and accurate post-processing technique for acquiring information of soil and water conservation engineering, on the Loess Plateau of China, using SPOT image with 2.5 rn resolution. We argue that it is vital to optimize satellite image filtering parameters for special areas and purposes, which focus on monitoring ecological construction projects. We want to know how image filtering influences final classified results and which filtering kernel is optimum. The study design used a series of window sizes to filter the original classified image, and then assess the accuracy of each output map and image quality. We measured the relationship between filtering window size and classification accuracy, and optimized the post-processing techniques of SPOT5satellite images. We conclude that (1) smoothing with the majority filter is sensitive to the information accuracy of soil and water conservation engineering, and (2) for SPOT5 2.5 m image, the 5×5 pixel majority filter is most suitable kernel for extracting information of ecological construction sites in the Loess Plateau of

  11. Coseismic displacements from SAR image offsets between different satellite sensors: Application to the 2001 Bhuj (India) earthquake

    KAUST Repository

    Wang, Teng

    2015-09-05

    Synthetic aperture radar (SAR) image offset tracking is increasingly being used for measuring ground displacements, e.g., due to earthquakes and landslide movement. However, this technique has been applied only to images acquired by the same or identical satellites. Here we propose a novel approach for determining offsets between images acquired by different satellite sensors, extending the usability of existing SAR image archives. The offsets are measured between two multiimage reflectivity maps obtained from different SAR data sets, which provide significantly better results than with single preevent and postevent images. Application to the 2001 Mw7.6 Bhuj earthquake reveals, for the first time, its near-field deformation using multiple preearthquake ERS and postearthquake Envisat images. The rupture model estimated from these cross-sensor offsets and teleseismic waveforms shows a compact fault slip pattern with fairly short rise times (<3 s) and a large stress drop (20 MPa), explaining the intense shaking observed in the earthquake.

  12. Low-grade meningioma showing nearly equal density with spinal fluid on radiographic images.

    Science.gov (United States)

    Tamura, Ryota; Tomita, Hideyuki; Shimizu, Kazuhiko; Sugiyama, Kazutoshi

    2013-06-21

    A 61-year-old woman had an intracranial tumour that was located on the falx. Meningioma was suspected and the tumour rapidly grew over 1 year. It showed nearly equal density with spinal fluid showing almost no enhancement on radiographic images, like microcystic meningioma. Successful removal of the tumour was achieved. Histopathologically, the tumour was diagnosed as low-grade meningioma. The meningioma had variable sized microcysts and the appearance of solid area was meningothelial meningioma. This is a rare radiographic image for meningothelial meningioma.

  13. Forecasting irrigation demand by assimilating satellite images and numerical weather predictions

    Science.gov (United States)

    Pelosi, Anna; Medina, Hanoi; Villani, Paolo; Falanga Bolognesi, Salvatore; D'Urso, Guido; Battista Chirico, Giovanni

    2016-04-01

    Forecasting irrigation water demand, with small predictive uncertainty in the short-medium term, is fundamental for an efficient planning of water resource allocation among multiple users and for decreasing water and energy consumptions. In this study we present an innovative system for forecasting irrigation water demand, applicable at different spatial scales: from the farm level to the irrigation district level. The forecast system is centred on a crop growth model assimilating data from satellite images and numerical weather forecasts, according to a stochastic ensemble-based approach. Different sources of uncertainty affecting model predictions are represented by an ensemble of model trajectories, each generated by a possible realization of the model components (model parameters, input weather data and model state variables). The crop growth model is based on a set of simplified analytical relations, with the aim to assess biomass, leaf area index (LAI) growth and evapotranspiration rate with a daily time step. Within the crop growth model, LAI dynamics is let be governed by temperature and leaf dry matter supply, according to the development stage of the crop. The model assimilates LAI data retrieved from VIS-NIR high-resolution multispectral satellite images. Numerical weather model outputs are those from the European limited area ensemble prediction system (COSMO-LEPS), which provides forecasts up to five days with a spatial resolution of seven kilometres. Weather forecasts are sequentially bias corrected based on data from ground weather stations. The forecasting system is evaluated in experimental areas of southern Italy during three irrigation seasons. The performance analysis shows very accurate irrigation water demand forecasts, which make the proposed system a valuable support for water planning and saving at farm level as well as for water management at larger spatial scales.

  14. Imager-to-Radiometer In-flight Cross Calibration: RSP Radiometric Comparison with Airborne and Satellite Sensors

    Science.gov (United States)

    McCorkel, Joel; Cairns, Brian; Wasilewski, Andrzej

    2016-01-01

    This work develops a method to compare the radiometric calibration between a radiometer and imagers hosted on aircraft and satellites. The radiometer is the airborne Research Scanning Polarimeter (RSP), which takes multi-angle, photo-polarimetric measurements in several spectral channels. The RSP measurements used in this work were coincident with measurements made by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), which was on the same aircraft. These airborne measurements were also coincident with an overpass of the Landsat 8 Operational Land Imager (OLI). First we compare the RSP and OLI radiance measurements to AVIRIS since the spectral response of the multispectral instruments can be used to synthesize a spectrally equivalent signal from the imaging spectrometer data. We then explore a method that uses AVIRIS as a transfer between RSP and OLI to show that radiometric traceability of a satellite-based imager can be used to calibrate a radiometer despite differences in spectral channel sensitivities. This calibration transfer shows agreement within the uncertainty of both the various instruments for most spectral channels.

  15. Pre-processing Algorithm for Rectification of Geometric Distortions in Satellite Images

    Directory of Open Access Journals (Sweden)

    Narayan Panigrahi

    2011-02-01

    Full Text Available A number of algorithms have been reported to process and remove geometric distortions in satellite images. Ortho-correction, geometric error correction, radiometric error removal, etc are a few important examples. These algorithm require supplementary meta-information of the satellite images such as ground control points and correspondence, sensor orientation details, elevation profile of the terrain, etc to establish corresponding transformations. In this paper, a pre-processing algorithm has been proposed which removes systematic distortions of a satellite image and thereby removes the blank portion of the image. It is an input-to-output mapping of image pixels, where the transformation computes the coordinate of each output pixel corresponding to the input pixel of an image. The transformation is established by the exact amount of scaling, rotation and translation needed for each pixel in the input image so that the distortion induced during the recording stage is corrected.Defence Science Journal, 2011, 61(2, pp.174-179, DOI:http://dx.doi.org/10.14429/dsj.61.421

  16. A DHIP Algorithm for SAR Satellite Imaging Planning%SAR卫星成像任务规划的DHIP方法

    Institute of Scientific and Technical Information of China (English)

    朱小满; 王钧; 李军; 景宁

    2011-01-01

    The emergence of earth observing satellite with Synthetic Aperture Radar (SAR) onboard provides a significant instrument to obtain geo-space information. This paper studies rightly on the SAR satellite imaging planning problem. Firstly, the general imaging process of SAR satellite is described to illustrate that the methods pertinent to optical satellite imaging planning are no longer suitable for the problem of a SAR satellite imaging planning. Secondly, the main influential constraints of SAR satellite are induced. Based on that, an approach called DHIP (Double Hierarchy Insert Planning) is proposed and described detailedly. The main idea of this method is to form an optimized scheme by tentatively inserting every candidate imaging request through two hierarchies, which are the hierarchy of SAR opening and closing, and that of photographing, by a checking while constructing method. The final experimental results show that the DHIP algorithm works fast and is able to get a satisfying scheme under general circumstances.%合成孔径雷达(SAR)卫星的出现为获取地球空间信息提供了重要手段,本文研究的即是SAR卫星成像任务规划问题.首先描述了SAR成像卫星的一般工作流程,说明针对可见光卫星进行成像任务规划的方法不再适用于SAR成像卫星任务规划;然后归纳了影响SAR卫星成像的主要约束.在此基础上,提出了双层插入规划(DHIP)方法,该方法将待规划任务在星载SAR开关机信息元组级和成像信息元组级两个层级上逐次进行试探性插入,采用边构造边检测的方法获得该问题的优化解.实验结果表明,该方法计算速度快,可以有效解决SAR卫星成像任务规划问题.

  17. Multiangle Bistatic SAR Imaging and Fusion Based on BeiDou-2 Navigation Satellite System

    Directory of Open Access Journals (Sweden)

    Zeng Tao

    2015-01-01

    Full Text Available Bistatic Synthetic Aperture Radar (BSAR based on the Global Navigation Service System (GNSSBSAR uses navigation satellites as radar transmitters, which are low in cost. However, GNSS-BSAR images have poor resolution and low Signal-to-Noise Ratios (SNR. In this paper, a multiangle observation and data processing strategy are presented based on BeiDou-2 navigation satellite imagery, from which twenty-six BSAR images in different configurations are obtained. A region-based fusion algorithm using region of interest segmentation is proposed, and a high-quality fusion image is obtained. The results reveal that the multiangle imaging method can extend the applications of GNSS-BSAR.

  18. Collection of road traffic information from satellite images and digital map

    Science.gov (United States)

    Shinmura, Fumito; Saji, Hitoshi

    2010-10-01

    There have been many reports on the analysis of the Earth's surface by remote sensing. The purpose of this study is to analyze traffic information, and we have been studying methods of collecting traffic information by remote sensing. To collect traffic information, sensors installed on the roadside are frequently used. However, methods using sensors only collect information around the positions of the sensors. In this study, we attempt to solve this problem by using satellite images, which have recently become increasingly available. We propose a method of collecting traffic information over a large area using satellite images as well as three-dimensional digital maps. We assess traffic conditions by computing the number of edges of vehicles per road section as follows. First, the edges of vehicles are detected in satellite images. During this processing, three-dimensional digital maps are used to increase the accuracy of vehicle edge detection. The number of vehicles per road section, which is computed from the number of edges of vehicles, is computed and referred to as the vehicle density. Traffic conditions can be assessed from the vehicle density and are considered useful for collecting information on traffic congestion. In this study, we experimentally confirm that congested roads can be extracted from satellite images by our method.

  19. Performance Evaluation of Machine Learning Algorithms for Urban Pattern Recognition from Multi-spectral Satellite Images

    OpenAIRE

    Marc Wieland; Massimiliano Pittore

    2014-01-01

    In this study, a classification and performance evaluation framework for the recognition of urban patterns in medium (Landsat ETM, TM and MSS) and very high resolution (WorldView-2, Quickbird, Ikonos) multi-spectral satellite images is presented. The study aims at exploring the potential of machine learning algorithms in the context of an object-based image analysis and to thoroughly test the algorithm’s performance under varying conditions to optimize their usage for urban pattern recognitio...

  20. Mapping land cover from satellite images: A basic, low cost approach

    Science.gov (United States)

    Elifrits, C. D.; Barney, T. W.; Barr, D. J.; Johannsen, C. J.

    1978-01-01

    Simple, inexpensive methodologies developed for mapping general land cover and land use categories from LANDSAT images are reported. One methodology, a stepwise, interpretive, direct tracing technique was developed through working with university students from different disciplines with no previous experience in satellite image interpretation. The technique results in maps that are very accurate in relation to actual land cover and relative to the small investment in skill, time, and money needed to produce the products.

  1. Extraction of DTM from Satellite Images Using Neural Networks

    OpenAIRE

    Tapper, Gustav

    2016-01-01

    This thesis presents a way to generate a Digital Terrain Model (dtm) from a Digital Surface Model (dsm) and multi spectral images (including the Near Infrared (nir) color band). An Artificial Neural Network (ann) is used to pre-classify the dsm and multi spectral images. This in turn is used to filter the dsm to a dtm. The use of an ann as a classifier provided good results. Additionally, the addition of the nir color band resulted in an improvement of the accuracy of the classifier. Using th...

  2. Magnetic resonance imaging research in sub-Saharan Africa: challenges and satellite-based networking implementation.

    Science.gov (United States)

    Latourette, Matthew T; Siebert, James E; Barto, Robert J; Marable, Kenneth L; Muyepa, Anthony; Hammond, Colleen A; Potchen, Michael J; Kampondeni, Samuel D; Taylor, Terrie E

    2011-08-01

    As part of an NIH-funded study of malaria pathogenesis, a magnetic resonance (MR) imaging research facility was established in Blantyre, Malaŵi to enhance the clinical characterization of pediatric patients with cerebral malaria through application of neurological MR methods. The research program requires daily transmission of MR studies to Michigan State University (MSU) for clinical research interpretation and quantitative post-processing. An intercontinental satellite-based network was implemented for transmission of MR image data in Digital Imaging and Communications in Medicine (DICOM) format, research data collection, project communications, and remote systems administration. Satellite Internet service costs limited the bandwidth to symmetrical 384 kbit/s. DICOM routers deployed at both the Malaŵi MRI facility and MSU manage the end-to-end encrypted compressed data transmission. Network performance between DICOM routers was measured while transmitting both mixed clinical MR studies and synthetic studies. Effective network latency averaged 715 ms. Within a mix of clinical MR studies, the average transmission time for a 256 × 256 image was ~2.25 and ~6.25 s for a 512 × 512 image. Using synthetic studies of 1,000 duplicate images, the interquartile range for 256 × 256 images was [2.30, 2.36] s and [5.94, 6.05] s for 512 × 512 images. Transmission of clinical MRI studies between the DICOM routers averaged 9.35 images per minute, representing an effective channel utilization of ~137% of the 384-kbit/s satellite service as computed using uncompressed image file sizes (including the effects of image compression, protocol overhead, channel latency, etc.). Power unreliability was the primary cause of interrupted operations in the first year, including an outage exceeding 10 days.

  3. Evidence of hydrocarbon pollution in soil exploiting satellite optical and radar images

    Science.gov (United States)

    Monsivais-Huertero, A.; Galvan-Pineda, J.; Espinosa-Hernandez, A.; Jimenez-Escalona, J. C.; Ramos-Rodriguez, J. M.

    2013-05-01

    Oil spills are one of the most important sources of hydrocarbon pollution in soils of areas near centers of extraction, storage or transportation of petroleum products. These spills or leaks can occur arising from deficient maintenance of facilities or accidents. The effects of these spills can spread for kilometers affecting large areas. This has a strong impact on the local ecosystem disturbing the flora and fauna. In costal tourist areas, this type of contaminants represents significant health risks for visitors and therefore, economic losses for the place. For this reason, it is very important to know and identify the areas affected by this type of pollution in order to create action plans for remediation of the ecosystem. Due to the large land extensions that can cover such disasters, satellite images become a valuable tool because of their large spatial coverage. Nowadays, different satellite techniques have been developed to recognize land affected by the presence of hydrocarbons. In the optical spectrum, optical sensing imagery (e.g. Landsat, SPOT, MODIS, etc.) has been widely used. However, these techniques have the intrinsic limitation in scenes with vegetation cover. In contrast, techniques exploiting radar images are still rare. The type of signal that is detected by the radar provides information even in areas with vegetation cover. The radar signal interacts with the vegetation and soil collecting information about the dielectric properties of the soil. This study identifies zones of contaminated soil by using the synergy of optical and radar images. This site of study is located in Paraiso, Tabasco, in Southern Mexico (18°27'N 93°32'W). The region is composed of coastal and tropical forest ecosystems and includes the Port Dos Bocas. The Port Dos Bocas has its points of extractions 130m away from the coast. The annual activities report 10 millions of tons of hydrocarbons transported using around 5500 ships. The methodology presented in this paper

  4. Simultaneous hierarchical segmentation and vectorization of satellite images through combined data sampling and anisotropic triangulation

    Energy Technology Data Exchange (ETDEWEB)

    Grazzini, Jacopo [Los Alamos National Laboratory; Prasad, Lakshman [Los Alamos National Laboratory; Dillard, Scott [PNNL

    2010-10-21

    The automatic detection, recognition , and segmentation of object classes in remote sensed images is of crucial importance for scene interpretation and understanding. However, it is a difficult task because of the high variability of satellite data. Indeed, the observed scenes usually exhibit a high degree of complexity, where complexity refers to the large variety of pictorial representations of objects with the same semantic meaning and also to the extensive amount of available det.ails. Therefore, there is still a strong demand for robust techniques for automatic information extraction and interpretation of satellite images. In parallel, there is a growing interest in techniques that can extract vector features directly from such imagery. In this paper, we investigate the problem of automatic hierarchical segmentation and vectorization of multispectral satellite images. We propose a new algorithm composed of the following steps: (i) a non-uniform sampling scheme extracting most salient pixels in the image, (ii) an anisotropic triangulation constrained by the sampled pixels taking into account both strength and directionality of local structures present in the image, (iii) a polygonal grouping scheme merging, through techniques based on perceptual information , the obtained segments to a smaller quantity of superior vectorial objects. Besides its computational efficiency, this approach provides a meaningful polygonal representation for subsequent image analysis and/or interpretation.

  5. 3D mapping from high resolution satellite images

    Science.gov (United States)

    Goulas, D.; Georgopoulos, A.; Sarakenos, A.; Paraschou, Ch.

    2013-08-01

    In recent years 3D information has become more easily available. Users' needs are constantly increasing, adapting to this reality and 3D maps are in more demand. 3D models of the terrain in CAD or other environments have already been common practice; however one is bound by the computer screen. This is why contemporary digital methods have been developed in order to produce portable and, hence, handier 3D maps of various forms. This paper deals with the implementation of the necessary procedures to produce holographic 3D maps and three dimensionally printed maps. The main objective is the production of three dimensional maps from high resolution aerial and/or satellite imagery with the use of holography and but also 3D printing methods. As study area the island of Antiparos was chosen, as there were readily available suitable data. These data were two stereo pairs of Geoeye-1 and a high resolution DTM of the island. Firstly the theoretical bases of holography and 3D printing are described, and the two methods are analyzed and there implementation is explained. In practice a x-axis parallax holographic map of the Antiparos Island is created and a full parallax (x-axis and y-axis) holographic map is created and printed, using the holographic method. Moreover a three dimensional printed map of the study area has been created using 3dp (3d printing) method. The results are evaluated for their usefulness and efficiency.

  6. Automatic cloud detection for high resolution satellite stereo images and its application in terrain extraction

    Science.gov (United States)

    Wu, Teng; Hu, Xiangyun; Zhang, Yong; Zhang, Lulin; Tao, Pengjie; Lu, Luping

    2016-11-01

    The automatic extraction of terrain from high-resolution satellite optical images is very difficult under cloudy conditions. Therefore, accurate cloud detection is necessary to fully use the cloud-free parts of images for terrain extraction. This paper addresses automated cloud detection by introducing an image matching based method under a stereo vision framework, and the optimization usage of non-cloudy areas in stereo matching and the generation of digital surface models (DSMs). Given that clouds are often separated from the terrain surface, cloudy areas are extracted by integrating dense matching DSM, worldwide digital elevation model (DEM) (i.e., shuttle radar topography mission (SRTM)) and gray information from the images. This process consists of the following steps: an image based DSM is firstly generated through a multiple primitive multi-image matcher. Once it is aligned with the reference DEM based on common features, places with significant height differences between the DSM and the DEM will suggest the potential cloud covers. Detecting cloud at these places in the images then enables precise cloud delineation. In the final step, elevations of the reference DEM within the cloud covers are assigned to the corresponding region of the DSM to generate a cloud-free DEM. The proposed approach is evaluated with the panchromatic images of the Tianhui satellite and has been successfully used in its daily operation. The cloud detection accuracy for images without snow is as high as 95%. Experimental results demonstrate that the proposed method can significantly improve the usage of the cloudy panchromatic satellite images for terrain extraction.

  7. Topic Modelling for Object-Based Unsupervised Classification of VHR Panchromatic Satellite Images Based on Multiscale Image Segmentation

    Directory of Open Access Journals (Sweden)

    Li Shen

    2017-08-01

    Full Text Available Image segmentation is a key prerequisite for object-based classification. However, it is often difficult, or even impossible, to determine a unique optimal segmentation scale due to the fact that various geo-objects, and even an identical geo-object, present at multiple scales in very high resolution (VHR satellite images. To address this problem, this paper presents a novel unsupervised object-based classification for VHR panchromatic satellite images using multiple segmentations via the latent Dirichlet allocation (LDA model. Firstly, multiple segmentation maps of the original satellite image are produced by means of a common multiscale segmentation technique. Then, the LDA model is utilized to learn the grayscale histogram distribution for each geo-object and the mixture distribution of geo-objects within each segment. Thirdly, the histogram distribution of each segment is compared with that of each geo-object using the Kullback-Leibler (KL divergence measure, which is weighted with a constraint specified by the mixture distribution of geo-objects. Each segment is allocated a geo-object category label with the minimum KL divergence. Finally, the final classification map is achieved by integrating the multiple classification results at different scales. Extensive experimental evaluations are designed to compare the performance of our method with those of some state-of-the-art methods for three different types of images. The experimental results over three different types of VHR panchromatic satellite images demonstrate the proposed method is able to achieve scale-adaptive classification results, and improve the ability to differentiate the geo-objects with spectral overlap, such as water and grass, and water and shadow, in terms of both spatial consistency and semantic consistency.

  8. SHADOW DETECTION FROM VERY HIGH RESOLUTON SATELLITE IMAGE USING GRABCUT SEGMENTATION AND RATIO-BAND ALGORITHMS

    Directory of Open Access Journals (Sweden)

    N. M. S. M. Kadhim

    2015-03-01

    Full Text Available Very-High-Resolution (VHR satellite imagery is a powerful source of data for detecting and extracting information about urban constructions. Shadow in the VHR satellite imageries provides vital information on urban construction forms, illumination direction, and the spatial distribution of the objects that can help to further understanding of the built environment. However, to extract shadows, the automated detection of shadows from images must be accurate. This paper reviews current automatic approaches that have been used for shadow detection from VHR satellite images and comprises two main parts. In the first part, shadow concepts are presented in terms of shadow appearance in the VHR satellite imageries, current shadow detection methods, and the usefulness of shadow detection in urban environments. In the second part, we adopted two approaches which are considered current state-of-the-art shadow detection, and segmentation algorithms using WorldView-3 and Quickbird images. In the first approach, the ratios between the NIR and visible bands were computed on a pixel-by-pixel basis, which allows for disambiguation between shadows and dark objects. To obtain an accurate shadow candidate map, we further refine the shadow map after applying the ratio algorithm on the Quickbird image. The second selected approach is the GrabCut segmentation approach for examining its performance in detecting the shadow regions of urban objects using the true colour image from WorldView-3. Further refinement was applied to attain a segmented shadow map. Although the detection of shadow regions is a very difficult task when they are derived from a VHR satellite image that comprises a visible spectrum range (RGB true colour, the results demonstrate that the detection of shadow regions in the WorldView-3 image is a reasonable separation from other objects by applying the GrabCut algorithm. In addition, the derived shadow map from the Quickbird image indicates

  9. Modifications of the heliostat procedures for irradiance estimates from satellite images

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, H.G.; Costanzo, Claudio; Heinemann, Detlev [Oldenburg Univ. (Germany). Fachbereich 8 - Physik

    1996-03-01

    Images taken by geostationary satellites may be used to estimate solar irradiance fluxes at the earth`s surface. The Heliostat method is a widely applied procedure for this task. It is based on the empirical correlation between a satellite derived cloud index and the irradiance at the ground. Modifications to this procedure that may reduce the temporal variability of the correlation are presented. The modified method may open the way to the use of a generic relation of cloud index and global irradiance. (author)

  10. An Investigation on Water Quality of Darlik Dam Drinking Water using Satellite Images

    Directory of Open Access Journals (Sweden)

    Erhan Alparslan

    2010-01-01

    Full Text Available Darlik Dam supplies 15% of the water demand of Istanbul Metropolitan City of Turkey. Water quality (WQ in the Darlik Dam was investigated from Landsat 5 TM satellite images of the years 2004, 2005, and 2006 in order to determine land use/land cover changes in the watershed of the dam that may deteriorate its WQ. The images were geometrically and atmospherically corrected for WQ analysis. Next, an investigation was made by multiple regression analysis between the unitless planetary reflectance values of the first four bands of the June 2005 Landsat TM image of the dam and WQ parameters, such as chlorophyll-a, total dissolved matter, turbidity, total phosphorous, and total nitrogen, measured at satellite image acquisition time at seven stations in the dam. Finally, WQ in the dam was studied from satellite images of the years 2004, 2005, and 2006 by pattern recognition techniques in order to determine possible water pollution in the dam. This study was compared to a previous study done by the authors in the Küçükçekmece water reservoir, also in Istanbul City.

  11. Fast segmentation of satellite images using SLIC, WebGL and Google Earth Engine

    Science.gov (United States)

    Donchyts, Gennadii; Baart, Fedor; Gorelick, Noel; Eisemann, Elmar; van de Giesen, Nick

    2017-04-01

    Google Earth Engine (GEE) is a parallel geospatial processing platform, which harmonizes access to petabytes of freely available satellite images. It provides a very rich API, allowing development of dedicated algorithms to extract useful geospatial information from these images. At the same time, modern GPUs provide thousands of computing cores, which are mostly not utilized in this context. In the last years, WebGL became a popular and well-supported API, allowing fast image processing directly in web browsers. In this work, we will evaluate the applicability of WebGL to enable fast segmentation of satellite images. A new implementation of a Simple Linear Iterative Clustering (SLIC) algorithm using GPU shaders will be presented. SLIC is a simple and efficient method to decompose an image in visually homogeneous regions. It adapts a k-means clustering approach to generate superpixels efficiently. While this approach will be hard to scale, due to a significant amount of data to be transferred to the client, it should significantly improve exploratory possibilities and simplify development of dedicated algorithms for geoscience applications. Our prototype implementation will be used to improve surface water detection of the reservoirs using multispectral satellite imagery.

  12. MORPHOLOGICAL PROFILE AND GRANULOMETRIC MAPS IN EXTRACTION OF BUILDINGS IN VHR SATELLITE IMAGES

    Directory of Open Access Journals (Sweden)

    Kupidura Przemysław

    2015-12-01

    Full Text Available The article is focused on the analysis of possibilities of using granulometric analysis methods: the morphological profile, and granulometric maps in detecting buildings on satellite images. It briefly explains the theoretical basis for granulometric analysis of image and compares two methods used in research. Tests were carried out on a fragment of QuickBird satellite scene – pansharpened multispectral image. 8 variants of classification differing in terms of the data and the model of classification were compared. Evaluation of the effectiveness of the different options for classification based on the analysis factor kappa values and omission and commission errors. The results indicate the significant potential of the proposed methods, and analysis of the observed imperfections allows to specify the possible fields of their development

  13. Very High Resolution Satellite Image Classification Using Fuzzy Rule-Based Systems

    Directory of Open Access Journals (Sweden)

    Yun Zhang

    2013-11-01

    Full Text Available The aim of this research is to present a detailed step-by-step method for classification of very high resolution urban satellite images (VHRSI into specific classes such as road, building, vegetation, etc., using fuzzy logic. In this study, object-based image analysis is used for image classification. The main problems in high resolution image classification are the uncertainties in the position of object borders in satellite images and also multiplex resemblance of the segments to different classes. In order to solve this problem, fuzzy logic is used for image classification, since it provides the possibility of image analysis using multiple parameters without requiring inclusion of certain thresholds in the class assignment process. In this study, an inclusive semi-automatic method for image classification is offered, which presents the configuration of the related fuzzy functions as well as fuzzy rules. The produced results are compared to the results of a normal classification using the same parameters, but with crisp rules. The overall accuracies and kappa coefficients of the presented method stand higher than the check projects.

  14. Detecting Weather Radar Clutter by Information Fusion With Satellite Images and Numerical Weather Prediction Model Output

    DEFF Research Database (Denmark)

    Bøvith, Thomas; Nielsen, Allan Aasbjerg; Hansen, Lars Kai

    2006-01-01

    A method for detecting clutter in weather radar images by information fusion is presented. Radar data, satellite images, and output from a numerical weather prediction model are combined and the radar echoes are classified using supervised classification. The presented method uses indirect...... information on precipitation in the atmosphere from Meteosat-8 multispectral images and near-surface temperature estimates from the DMI-HIRLAM-S05 numerical weather prediction model. Alternatively, an operational nowcasting product called 'Precipitating Clouds' based on Meteosat-8 input is used. A scale...

  15. Forecast of wheat yield throughout the agricultural season using optical and radar satellite images

    Science.gov (United States)

    Fieuzal, R.; Baup, F.

    2017-07-01

    The aim of this study is to estimate the capabilities of forecasting the yield of wheat using an artificial neural network combined with multi-temporal satellite data acquired at high spatial resolution throughout the agricultural season in the optical and/or microwave domains. Reflectance (acquired by Formosat-2, and Spot 4-5 in the green, red, and near infrared wavelength) and multi-configuration backscattering coefficients (acquired by TerraSAR-X and Radarsat-2 in the X- and C-bands, at co- (abbreviated HH and VV) and cross-polarization states (abbreviated HV and VH)) constitute the input variable of the artificial neural networks, which are trained and validated on the successively acquired images, providing yield forecast in near real-time conditions. The study is based on data collected over 32 fields of wheat distributed over a study area located in southwestern France, near Toulouse. Among the tested sensor configurations, several satellite data appear useful for the yield forecasting throughout the agricultural season (showing coefficient of determination (R2) larger than 0.60 and a root mean square error (RMSE) lower than 9.1 quintals by hectare (q ha-1)): CVH, CHV, or the combined used of XHH and CHH, CHH and CHV, or green reflectance and CHH. Nevertheless, the best accurate forecast (R2 = 0.76 and RMSE = 7.0 q ha-1) is obtained longtime before the harvest (on day 98, during the elongation of stems) using the combination of co- and cross-polarized backscattering coefficients acquired in the C-band (CVV and CVH). These results highlight the high interest of using synthetic aperture radar (SAR) data instead of optical ones to early forecast the yield before the harvest of wheat.

  16. Cucumber mosaic virus satellite RNAs that induce similar symptoms in melon plants show large differences in fitness.

    Science.gov (United States)

    Betancourt, Mónica; Fraile, Aurora; García-Arenal, Fernando

    2011-08-01

    Two groups of Cucumber mosaic virus (CMV) satellite RNAs (satRNAs), necrogenic and non-necrogenic, can be differentiated according to the symptoms they cause in tomato plants, a host in which they also differ in fitness. In most other CMV hosts these CMV-satRNA cause similar symptoms. Here, we analyse whether they differ in traits determining their relative fitness in melon plants, in which the two groups of CMV-satRNAs cause similar symptoms. For this, ten necrogenic and ten non-necrogenic field satRNA genotypes were assayed with Fny-CMV as a helper virus. Neither type of CMV-satRNA modified Fny-CMV symptoms, and both types increased Fny-CMV virulence similarly, as measured by decreases in plant biomass and lifespan. Necrogenic and non-necrogenic satRNAs differed in their ability to multiply in melon tissues; necrogenic satRNAs accumulated to higher levels both in single infection and in competition with non-necrogenic satRNAs. Indeed, multiplication of some non-necrogenic satRNAs was undetectable. Transmission between hosts by aphids was less efficient for necrogenic satRNAs as a consequence of a more severe reduction of CMV accumulation in leaves. The effect of CMV accumulation on aphid transmission was not compensated for by differences in satRNA encapsidation efficiency or transmissibility to CMV progeny. Thus, necrogenic and non-necrogenic satRNAs differ in their relative fitness in melon, and trade-offs are apparent between the within-host and between-host components of satRNA fitness. Hence, CMV-satRNAs could have different evolutionary dynamics in CMV host-plant species in which they do not differ in pathogenicity.

  17. Modeling of solar irradiance using satellite images and direct terrestrial measurements with PV modules

    Science.gov (United States)

    Tyukhov, Igor; Schakhramanyan, Michael; Strebkov, Dmitry; Tikhonov, Anton; Vignola, Frank

    2009-08-01

    A simple, affordable and efficient multifaceted system with technical software programs, "Kosmos 3M", was developed for taking images of the Earth from NOAA satellites and for handling this images and analyzing many geographical and meteorological parameters. Technical software programs have been developed that utilize the "Kosmos 3M" Receiver system. Basic capabilities of the multifaceted "Kosmos 3M" system include: receiving signal from NOAA satellites; digital processing of space images with geographical fixing, superposition of maps of cities and coordinate grid; finding of geographical coordinates at any point of space image; finding of temperature of underlying surface at given points; finding of albedo (reflection coefficient) at any point of space image; finding of upper boundary of clouds (cloudiness); forecasting of dangerous weather phenomena; defining wind fields in cyclones; precipitations forecast; measuring distances between given points; measuring surfaces (areas); and forming of electronic library of images of the Earth. Work is underway to use the "Kosmos 3M" cloudiness images to estimate the incident solar radiation values for evaluating terrestrial solar energy performance in real time. Such kind of system would have a wide variety of uses from the classroom to the field.

  18. Determination of the Impact of Urbanization on Agricultural Lands using Multi-temporal Satellite Sensor Images

    Science.gov (United States)

    Kaya, S.; Alganci, U.; Sertel, E.; Ustundag, B.

    2015-12-01

    Throughout the history, agricultural activities have been performed close to urban areas. Main reason behind this phenomenon is the need of fast marketing of the agricultural production to urban residents and financial provision. Thus, using the areas nearby cities for agricultural activities brings out advantage of easy transportation of productions and fast marketing. For decades, heavy migration to cities has directly and negatively affected natural grasslands, forests and agricultural lands. This pressure has caused agricultural lands to be changed into urban areas. Dense urbanization causes increase in impervious surfaces, heat islands and many other problems in addition to destruction of agricultural lands. Considering the negative impacts of urbanization on agricultural lands and natural resources, a periodic monitoring of these changes becomes indisputably important. At this point, satellite images are known to be good data sources for land cover / use change monitoring with their fast data acquisition, large area coverages and temporal resolution properties. Classification of the satellite images provides thematic the land cover / use maps of the earth surface and changes can be determined with GIS based analysis multi-temporal maps. In this study, effects of heavy urbanization over agricultural lands in Istanbul, metropolitan city of Turkey, were investigated with use of multi-temporal Landsat TM satellite images acquired between 1984 and 2011. Images were geometrically registered to each other and classified using supervised maximum likelihood classification algorithm. Resulting thematic maps were exported to GIS environment and destructed agricultural lands by urbanization were determined using spatial analysis.

  19. Detection of Burn Area and Severity with MODIS Satellite Images and Spatial Autocorrelation Techniques

    Science.gov (United States)

    Kaya, S.; Kavzoglu, T.; Tonbul, H.

    2014-12-01

    Effects of forest fires and implications are one of the most important natural disasters all over the world. Statistical data observed that forest fires had a variable structure in the last century in Turkey, but correspondingly the population growth amount of forest fires and burn area increase widely in recent years. Depending on this, erosion, landslides, desertification and mass loss come into existence. In addition; after forest fires, renewal of forests and vegetation are very important for land management. Classic methods used for detection of burn area and severity requires a long and challenging process due to time and cost factors. Thanks to advanced techniques used in the field of Remote Sensing, burn area and severity can be determined with high detail and precision. The purpose of this study based on blending MODIS (Moderate Resolution Imaging Spectradiometer) satellite images and spatial autocorrelation techniques together, thus detect burn area and severity absolutely. In this context, spatial autocorrelation statistics like Moran's I and Get is-Ord Local Gi indexes were used to measure and analyze to burned area characteristics. Prefire and postfire satellite images were used to determine fire severity depending on spectral indexes corresponding to biomass loss and carbon emissivity intensities. Satellite images have used for identification of fire damages and risks in terms of fire management for a long time. This study was performed using prefire and postfire satellite images and spatial autocorrelation techniques to determining and analyzing forest fires in Antalya, Turkey region which serious fires occurred. In this context, this approach enables the characterization of distinctive texture of burned area and helps forecasting more precisely. Finally, it is observed that mapping of burned area and severity could be performed from local scale to national scale. Key Words: Spatial autocorrelation, MODIS, Fire, Burn Severity

  20. Foodstuff Survey Around a Major Nuclear Facility with Test of Satellite Image Application

    Energy Technology Data Exchange (ETDEWEB)

    Fledderman, P.D.

    1999-07-16

    'A foodstuff survey was performed around the Savannah River Site, Aiken SC. It included a census of buildings and fields within 5 km of the boundary and determination of the locations and amounts of crops grown within 80 km of SRS center. Recent information for this region was collected on the amounts of meat, poultry, milk, and eggs produced, of deer hunted, and of sports fish caught. The locations and areas devoted to growing each crop were determined in two ways: by the usual process of assuming uniform crop distribution in each county on the basis of agricultural statistics reported by state agencies, and by analysis of two LANDSAT TM images obtained in May and September. For use with environmental radionuclide transfer and radiation dose calculation codes, locations within 80 km were defined for 64 sections by 16 sectors centered on the Site and by 16-km distance intervals from 16 km to 80 km. Most locally-raised foodstuff was distributed regionally and not retained locally for consumption. For four food crops, the amounts per section based on county agricultural statistics prorated by area were compared with the amounts per section based on satellite image analysis. The median ratios of the former to the latter were 0.6 - 0.7, suggesting that the two approaches are comparable but that satellite image analysis gave consistently higher amounts. Use of satellite image analysis is recommended on the basis of these findings to obtain site-specific, as compared to area-averaged, information on crop locations in conjunction with radionuclide pathway modelling. Some improvements in technique are suggested for satellite image application to characterize additional crops.'

  1. Image and Processing Models for Satellite Detection in Images Acquired by Space-based Surveillance-of-Space Sensors

    Science.gov (United States)

    2010-09-01

    software. Résumé …..... Dans le cadre de la surveillance de l’espace, les objets spatiaux connus en orbite (OSO), i.e., satellites actifs ou débris...SAPPHIRE et NEOSSat. Ce document contient des modèles qui décrivent la formation des images et le processus d’acquisition de capteurs , basés au sol ou dans

  2. Fusion between Satellite and Geophysical images in the study of Archaeological Sites

    Science.gov (United States)

    Karamitrou, A. A.; Tsokas, G. N.; Petrou, M.; Maggidis, C.

    2012-12-01

    In this work various image fusion techniques are used between one satellite (Quickbird) and one geophysical (electric resistivity) image to create various combinations with higher information content than the two original images independently. The resultant images provide more information about possible buried archaeological relics. The examined archaeological area is located in mainland Greece near the city of Boetia at the acropolis of Gla. The acropolis was built on a flat-topped bedrock outcrop at the north-eastern edge of the Kopais basin. When Kopais was filled with water, Glas was emerging as an island. At the end of 14th century the two palaces of Thebes and Orchomenos jointly utilized a large scale engineering project in order to transform the Kopais basin into a fertile plain. They used the acropolis to monitor the project, and as a warehouse to storage the harvest. To examine the Acropolis for potential archaeological remnants we use one Quickbird satellite image that covers the surrounding area of Gla. The satellite image includes one panchromatic (8532x8528 pixels) and one multispectral (2133x2132 pixels) image, collected on 30th of August 2011, covering an area of 20 square kilometers. On the other hand, geophysical measurements were performed using the electric resistivity method to the south west part of the Acropolis. To combine these images we investigate mean-value fusion, wavelets fusion, and curvelet fusion. In the cases of wavelet and curvelet fusion we apply as the fusion criterion the maximum frequency rule. Furthermore, the two original images, and excavations near the area suggest that the dominant orientations of the buried features are north-south and east-west. Therefore, in curvelet fusion method, in curvelet domain we enhance the image details along these specific orientations, additionally to the fusion. The resultant fused images succeed to map linear and rectangular features that were not easily visible in the original images

  3. Persistent scatterers detection on synthetic aperture radar images acquired by Sentinel-1 satellite

    Science.gov (United States)

    Dǎnişor, Cosmin; Popescu, Anca; Datcu, Mihai

    2016-12-01

    Persistent Scatterers Interferometry (PS-InSAR) has become a popular method in remote sensing because of its capability to measure terrain deformations with very high accuracy. It relies on multiple Synthetic Aperture Radar (SAR) acquisitions, to monitor points with stable proprieties over time, called Persistent Scatterers (PS)[1]. These points are unaffected by temporal decorrelation, therefore by analyzing their interferometric phase variation we can estimate the scene's deformation rates within a given time interval. In this work, we apply two incoherent detection algorithms to identify Persistent Scatterers candidates in the city of Focșani, Romania. The first method studies the variation of targets' intensities along the SAR acquisitions and the second method analyzes the spectral proprieties of the scatterers. The algorithms were implemented on a dataset containing 11 complex images of the region covering Buzău, Brăila and Focșani cities. Images were acquired by Sentinel-1 satellite in a time span of 5 months, from October 2014 to February 2015. The processing chain follows the requirements imposed by the new C-band SAR images delivered by the Sentinel-1 satellite (launched in April 2014) imaging in Interferometric Wide (IW) mode. Considering the particularities of the TOPS (Terrain Observation with Progressive Scans in Azimuth) imaging mode[2], special requirements had to be considered for pre-processing steps. The PS detection algorithms were implemented in Gamma RS program, a software which contains various function packages dedicated to SAR images focalization, analysis and processing.

  4. A Low-Complexity UEP Methodology Demonstrated on a Turbo-Encoded Wavelet Image Satellite Downlink

    Directory of Open Access Journals (Sweden)

    Salemi Eric

    2008-01-01

    Full Text Available Realizing high-quality digital image transmission via a satellite link, while optimizing resource distribution and minimizing battery consumption, is a challenging task. This paper describes a methodology to optimize a turbo-encoded wavelet-based satellite downlink progressive image transmission system with unequal error protection (UEP techniques. To achieve that goal, we instantiate a generic UEP methodology onto the system, and demonstrate that the proposed solution has little impact on the average performance, while greatly reducing the run-time complexity. Based on a simple design-time distortion model and a low-complexity run-time algorithm, the provided solution can dynamically tune the system's configuration to any bitrate constraint or channel condition. The resulting system outperforms in terms of peak signal-to-noise ratio (PSNR, a state-of-the-art, fine-tuned equal error protection (EEP solution by as much as 2 dB.

  5. Soil salinity detection from satellite image analysis: an integrated approach of salinity indices and field data.

    Science.gov (United States)

    Morshed, Md Manjur; Islam, Md Tazmul; Jamil, Raihan

    2016-02-01

    This paper attempts to detect soil salinity from satellite image analysis using remote sensing and geographic information system. Salinity intrusion is a common problem for the coastal regions of the world. Traditional salinity detection techniques by field survey and sampling are time-consuming and expensive. Remote sensing and geographic information system offer economic and efficient salinity detection, monitoring, and mapping. To predict soil salinity, an integrated approach of salinity indices and field data was used to develop a multiple regression equation. The correlations between different indices and field data of soil salinity were calculated to find out the highly correlated indices. The best regression model was selected considering the high R (2) value, low P value, and low Akaike's Information Criterion. About 20% variation was observed between the field data and predicted EC from the satellite image analysis. The precision of this salinity detection technique depends on the accuracy and uniform distribution of field data.

  6. Digital elevation model and satellite images an assessment of soil erosion potential in the Pcinja catchment

    Directory of Open Access Journals (Sweden)

    Milevski Ivica

    2007-01-01

    Full Text Available Pcinja is large left tributary of Vardar River (135 km long, 2877,3 km2 catchment’s area, which drainages surface waters from northeastern Macedonia, and small part of southeastern Serbia. Because of suitable physical-geographic factors (geology, terrain morphology, climate, hydrology, vegetation coverage, soil composition, and high human impact, some parts of the catchment’s suffer significant erosion process. For this reason, it is necessary to research properly spatial distribution of erosion, then influence of physical and anthropogenic factors for the intensity of soil erosion, related erosion landforms (with morphology, genesis, evolution, soil erosion protection etc.. Earlier researches in the area have been performed generally with combination of cartographic and classic field analysis. But in last decades, there are new possibilities available like satellite images and digital elevation models. In this work has been presented the methodology of utilization of satellite images and DEM for erosion research, with analysis and comparisons of outcome data.

  7. A novel super resolution scheme to acquire and process satellite images

    Science.gov (United States)

    Yin, Dong-yu; Su, Xiao-feng; Lin, Jian-chun; Wang, Gan-quan; Kuang, Ding-bo

    2013-09-01

    Geosynchronous satellite has obvious limitations for the weight and the scale of payloads, and large aperture optical system is not permitted. The optical diffraction limit of small aperture optical system has an adverse impact on the resolution of the acquired images. Therefore, how to get high resolution images using super-resolution technique with the acquired low resolution images becomes a popular problem investigated by researchers. Here, we present a novel scheme to acquire low resolution images and process them to achieve a high resolution image. Firstly, to acquire low resolution images, we adopt a special arrangement pattern of four CCD staggered arrays on the focal plane in the remote sensing satellite framework .These four CCD linear arrays are parallelized with a 0.25√2 pixel shift along the CCD direction and a 1.25 pixel shift along the scanning direction. The rotation angle between the two directions is 45 degree. The tilting sampling mode and the special arrangement pattern allow the sensor to acquire images with a smaller sampling interval which can give the resolution a greater enhancement. Secondly, to reconstruct a high resolution image of pretty good quality with a magnification factor 4, we propose a novel algorithm based on the iterative-interpolation super resolution algorithm (IISR) and the new edge-directed interpolation algorithm (NEDI). The new algorithm makes a critical improvement to NEDI and introduces it into the multi-frame interpolation in IISR. The algorithm can preserve the edges well and requires a relatively small number of low-resolution images to achieve better reconstruction accuracy .In the last part of the paper, we carry out a simulation experiment, and use MSE as the quality measure. The results demonstrate that our new scheme substantially improves the image resolution with both better quantitative quality and visual quality compared with some previous normal methods.

  8. Coastal water quality estimation from Geostationary Ocean Color Imager (GOCI) satellite data using machine learning approaches

    Science.gov (United States)

    Im, Jungho; Ha, Sunghyun; Kim, Yong Hoon; Ha, Hokyung; Choi, Jongkuk; Kim, Miae

    2014-05-01

    It is important to monitor coastal water quality using key parameters such as chlorophyll-a concentration and suspended sediment to better manage coastal areas as well as to better understand the nature of biophysical processes in coastal seawater. Remote sensing technology has been commonly used to monitor coastal water quality due to its ability of covering vast areas at high temporal resolution. While it is relatively straightforward to estimate water quality in open ocean (i.e., Case I water) using remote sensing, coastal water quality estimation is still challenging as many factors can influence water quality, including various materials coming from inland water systems and tidal circulation. There are continued efforts to accurately estimate water quality parameters in coastal seawater from remote sensing data in a timely manner. In this study, two major water quality indicators, chlorophyll-a concentration and the amount of suspended sediment, were estimated using Geostationary Ocean Color Imager (GOCI) satellite data. GOCI, launched in June 2010, is the first geostationary ocean color observation satellite in the world. GOCI collects data hourly for 8 hours a day at 6 visible and 2 near-infrared bands at a 500 m resolution with 2,500 x 2,500 km square around Korean peninsula. Along with conventional statistical methods (i.e., various linear and non-linear regression), three machine learning approaches such as random forest, Cubist, and support vector regression were evaluated for coastal water quality estimation. In situ measurements (63 samples; including location, two water quality parameters, and the spectra of surface water using a hand-held spectroradiometer) collected during four days between 2011 and 2012 were used as reference data. Due to the small sample size, leave-one-out cross validation was used to assess the performance of the water quality estimation models. Atmospherically corrected radiance data and selected band-ratioed images were used

  9. Adolescent earthquake survivors' show increased prefrontal cortex activation to masked earthquake images as adults.

    Science.gov (United States)

    Du, Xue; Wei, Dongtao; Ganzel, Barbara L; Kim, Pilyoung; Zhang, Qinglin; Qiu, Jiang

    2015-03-01

    The great Sichuan earthquake in China on May 12, 2008 was a traumatic event to many who live near the earthquake area. However, at present, there are few studies that explore the long-term impact of the adolescent trauma exposure on adults' brain function. In the present study, we used functional magnetic resonance imaging (fMRI) to investigate the brain activation evoked by masked trauma-related stimuli (earthquake versus neutral images) in 14 adults who lived near the epicenter of the great Sichuan earthquake when they were adolescents (trauma-exposed group) and 14 adults who lived farther from the epicenter of the earthquake when they were adolescents (control group). Compared with the control group, the trauma-exposed group showed significant elevation of activation in the right anterior cingulate cortex (ACC) and the medial prefrontal cortex (MPFC) in response to masked earthquake-related images. In the trauma-exposed group, the right ACC activation was negatively correlated with the frequency of symptoms of post-traumatic stress disorder (PTSD). These findings differ markedly from the long-term effects of trauma exposure in adults. This suggests that trauma exposure during adolescence may have a unique long-term impact on ACC/MPFC function, top-down modulation of trauma-related information, and subsequent symptoms of PTSD.

  10. Research on the classification result and accuracy of building windows in high resolution satellite images: take the typical rural buildings in Guangxi, China, as an example

    Science.gov (United States)

    Li, Baishou; Gao, Yujiu

    2015-12-01

    The information extracted from the high spatial resolution remote sensing images has become one of the important data sources of the GIS large scale spatial database updating. The realization of the building information monitoring using the high resolution remote sensing, building small scale information extracting and its quality analyzing has become an important precondition for the applying of the high-resolution satellite image information, because of the large amount of regional high spatial resolution satellite image data. In this paper, a clustering segmentation classification evaluation method for the high resolution satellite images of the typical rural buildings is proposed based on the traditional KMeans clustering algorithm. The factors of separability and building density were used for describing image classification characteristics of clustering window. The sensitivity of the factors influenced the clustering result was studied from the perspective of the separability between high image itself target and background spectrum. This study showed that the number of the sample contents is the important influencing factor to the clustering accuracy and performance, the pixel ratio of the objects in images and the separation factor can be used to determine the specific impact of cluster-window subsets on the clustering accuracy, and the count of window target pixels (Nw) does not alone affect clustering accuracy. The result can provide effective research reference for the quality assessment of the segmentation and classification of high spatial resolution remote sensing images.

  11. Quantitative measurements of Jupiter, Saturn, their rings and satellites made from Voyager imaging data

    Science.gov (United States)

    Collins, S. A.; Bunker, A. S.

    1983-01-01

    The Voyager spacecraft cameras use selenium-sulfur slow scan vidicons to convert focused optical images into sensible electrical signals. The vidicon-generated data thus obtained are the basis of measurements of much greater precision than was previously possible, in virtue of their superior linearity, geometric fidelity, and the use of in-flight calibration. Attention is given to positional, radiometric, and dynamical measurements conducted on the basis of vidicon data for the Saturn rings, the Saturn satellites, and the Jupiter atmosphere.

  12. IoSiS: a radar system for imaging of satellites in space

    Science.gov (United States)

    Jirousek, M.; Anger, S.; Dill, S.; Schreiber, E.; Peichl, M.

    2017-05-01

    Space debris nowadays is one of the main threats for satellite systems especially in low earth orbit (LEO). More than 700,000 debris objects with potential to destroy or damage a satellite are estimated. The effects of an impact often are not identifiable directly from ground. High-resolution radar images are helpful in analyzing a possible damage. Therefor DLR is currently developing a radar system called IoSiS (Imaging of Satellites in Space), being based on an existing steering antenna structure and our multi-purpose high-performance radar system GigaRad for experimental investigations. GigaRad is a multi-channel system operating at X band and using a bandwidth of up to 4.4 GHz in the IoSiS configuration, providing fully separated transmit (TX) and receive (RX) channels, and separated antennas. For the observation of small satellites or space debris a highpower traveling-wave-tube amplifier (TWTA) is mounted close to the TX antenna feed. For the experimental phase IoSiS uses a 9 m TX and a 1 m RX antenna mounted on a common steerable positioner. High-resolution radar images are obtained by using Inverse Synthetic Aperture Radar (ISAR) techniques. The guided tracking of known objects during overpass allows here wide azimuth observation angles. Thus high azimuth resolution comparable to the range resolution can be achieved. This paper outlines technical main characteristics of the IoSiS radar system including the basic setup of the antenna, the radar instrument with the RF error correction, and the measurement strategy. Also a short description about a simulation tool for the whole instrument and expected images is shown.

  13. Estimating Advective Near-surface Currents from Ocean Color Satellite Images

    Science.gov (United States)

    2015-01-01

    K., Arnone, R.A., et al. (2014). Forecasting the ocean’s optical environment using the BioCast system. Oceanography , 27, 46–57. 14 H. Yang et al...satellite images 0602435N 73-9358-09-5 Haoping Yang, Robert Arnone, Jason Jolliff Naval Research Laboratory Oceanography Division Stennis Space Center...U.S. East and Gulf coasts. The MCC calculation is validated in a series of Bio- Optical Forecasting (BioCast) experiments with predetermined synthetic

  14. Optimizing the Attitude Control of Small Satellite Constellations for Rapid Response Imaging

    Science.gov (United States)

    Nag, S.; Li, A.

    2016-12-01

    Distributed Space Missions (DSMs) such as formation flight and constellations, are being recognized as important solutions to increase measurement samples over space and time. Given the increasingly accurate attitude control systems emerging in the commercial market, small spacecraft now have the ability to slew and point within few minutes of notice. In spite of hardware development in CubeSats at the payload (e.g. NASA InVEST) and subsystems (e.g. Blue Canyon Technologies), software development for tradespace analysis in constellation design (e.g. Goddard's TAT-C), planning and scheduling development in single spacecraft (e.g. GEO-CAPE) and aerial flight path optimizations for UAVs (e.g. NASA Sensor Web), there is a gap in open-source, open-access software tools for planning and scheduling distributed satellite operations in terms of pointing and observing targets. This paper will demonstrate results from a tool being developed for scheduling pointing operations of narrow field-of-view (FOV) sensors over mission lifetime to maximize metrics such as global coverage and revisit statistics. Past research has shown the need for at least fourteen satellites to cover the Earth globally everyday using a LandSat-like sensor. Increasing the FOV three times reduces the need to four satellites, however adds image distortion and BRDF complexities to the observed reflectance. If narrow FOV sensors on a small satellite constellation were commanded using robust algorithms to slew their sensor dynamically, they would be able to coordinately cover the global landmass much faster without compensating for spatial resolution or BRDF effects. Our algorithm to optimize constellation satellite pointing is based on a dynamic programming approach under the constraints of orbital mechanics and existing attitude control systems for small satellites. As a case study for our algorithm, we minimize the time required to cover the 17000 Landsat images with maximum signal to noise ratio fall

  15. A Bayesian approach for solar resource potential assessment using satellite images

    Science.gov (United States)

    Linguet, L.; Atif, J.

    2014-03-01

    The need for a more sustainable and more protective development opens new possibilities for renewable energy. Among the different renewable energy sources, the direct conversion of sunlight into electricity by solar photovoltaic (PV) technology seems to be the most promising and represents a technically viable solution to energy demands. But implantation and deployment of PV energy need solar resource data for utility planning, accommodating grid capacity, and formulating future adaptive policies. Currently, the best approach to determine the solar resource at a given site is based on the use of satellite images. However, the computation of solar resource (non-linear process) from satellite images is unfortunately not straightforward. From a signal processing point of view, it falls within non-stationary, non-linear/non-Gaussian dynamical inverse problems. In this paper, we propose a Bayesian approach combining satellite images and in situ data. We propose original observation and transition functions taking advantages of the characteristics of both the involved type of data. A simulation study of solar irradiance is carried along with this method and a French Guiana solar resource potential map for year 2010 is given.

  16. Application of SVM on satellite images to detect hotspots in Jharia coal field region of India

    Energy Technology Data Exchange (ETDEWEB)

    Gautam, R.S.; Singh, D.; Mittal, A.; Sajin, P. [Indian Institute for Technology, Roorkee (India)

    2008-07-01

    The present paper deals with the application of Support Vector Machine (SVM) and image analysis techniques on NOAA/AVHRR satellite image to detect hotspots on the Jharia coal field region of India. One of the major advantages of using these satellite data is that the data are free with very good temporal resolution; while, one drawback is that these have low spatial resolution (i.e., approximately 1.1 km at nadir). Therefore, it is important to do research by applying some efficient optimization techniques along with the image analysis techniques to rectify these drawbacks and use satellite images for efficient hotspot detection and monitoring. For this purpose, SVM and multi-threshold techniques are explored for hotspot detection. The multi-threshold algorithm is developed to remove the cloud coverage from the land coverage. This algorithm also highlights the hotspots or fire spots in the suspected regions. SVM has the advantage over multi-thresholding technique that it can learn patterns from the examples and therefore is used to optimize the performance by removing the false points which are highlighted in the threshold technique. Both approaches can be used separately or in combination depending on the size of the image. The RBF (Radial Basis Function) kernel is used in training of three sets of inputs: brightness temperature of channel 3, Normalized Difference Vegetation Index (NDVI) and Global Environment Monitoring Index (GEMI), respectively. This makes a classified image in the output that highlights the hotspot and non-hotspot pixels. The performance of the SVM is also compared with the performance obtained from the neural networks and SVM appears to detect hotspots more accurately (greater than 91% classification accuracy) with lesser false alarm rate. The results obtained are found to be in good agreement with the ground based observations of the hotspots.

  17. Potential application of Kanade-Lucas-Tomasi tracker on satellite images for automatic change detection

    Science.gov (United States)

    Ahmed, Tasneem; Singh, Dharmendra; Raman, Balasubramanian

    2016-04-01

    Monitoring agricultural areas is still a very challenging task. Various models and methodologies have been developed for monitoring the agricultural areas with satellite images, but their practical applicability is limited due to the complexity in processing and dependence on a priori information. Therefore, in this paper, an attempt has been made to investigate the utility of the Kanade-Lucas-Tomasi (KLT) tracker, which is generally useful for tracking objects in video images, for monitoring agricultural areas. The KLT tracker was proposed to deal with the problem of image registration, but the use of the KLT tracker in satellite images for land cover monitoring is rarely reported. Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar (ALOS PALSAR) data has been used to identify and track the agricultural areas. The tracked pixels were compared with the agriculture pixels obtained from a decision tree algorithm and both results are closely matched. An image differencing change detection technique has been applied after KLT tracker implementation to observe the "change" and "no change" pixels in agricultural areas. It is observed that two kinds of changes are being detected. The areas where agriculture was not there earlier, but now is present, the changes are called positive changes. In the areas where agriculture was present earlier, but now is not present, those changes are referred to as negative changes. Unchanged areas retrieved from both the images are labeled as "no change" pixels. The novelty of the proposed algorithm is that it uses a simplified version of the KLT tracker to efficiently select and track the agriculture features on the basis of their spatial information and does not require a priori information every time.

  18. Investigation of triggering of poleward moving auroral forms using satellite-imager coordinated observations

    Science.gov (United States)

    Wang, Boyi; Nishimura, Yukitoshi; Zou, Ying; Lyons, Larry R.; Angelopoulos, Vassilis; Frey, Harald; Mende, Stephen

    2016-11-01

    Poleward moving auroral forms (PMAFs) are thought to be an ionospheric signature of dayside magnetic reconnection. While PMAFs are more likely to occur when the interplanetary magnetic field (IMF) is southward, how often PMAFs are triggered by changes in solar wind parameters is still an open question. To address this issue, we used one of the Automatic Geophysical Observatories all-sky imagers in Antarctica and the Time History of Events and Macroscale Interactions during Substorms (THEMIS) B and C satellites, which can give solar wind measurements much closer to the subsolar bow shock than by Wind or ACE, to examine if PMAFs occurred in association with IMF orientation changes. We identified 60 PMAFs in conjunction with THEMIS B and C during 2008, 2009, and 2011 and 70% of events show reduction of Bz before PMAF onset indicating that IMF southward turning plays an important role in triggering a majority of PMAFs. In contrast, the magnitude of the IMF Bz reduction in OMNI data was smaller and the reduction occurred in a slightly smaller percentage of events (40-60%). This suggests that solar wind structures that missed the L1 point or evolution of solar wind between the L1 point and THEMIS may be important for identifying IMF changes responsible for transient dayside reconnection. Additionally, 17 PMAFs that did not have substantial IMF southward turnings are correlated well with foreshock events, indicating that foreshock phenomena may also play a role in triggering PMAFs.

  19. Automated Astrometric Analysis of Satellite Observations using Wide-field Imaging

    Science.gov (United States)

    Skuljan, J.; Kay, J.

    2016-09-01

    An observational trial was conducted in the South Island of New Zealand from 24 to 28 February 2015, as a collaborative effort between the United Kingdom and New Zealand in the area of space situational awareness. The aim of the trial was to observe a number of satellites in low Earth orbit using wide-field imaging from two separate locations, in order to determine the space trajectory and compare the measurements with the predictions based on the standard two-line elements. This activity was an initial step in building a space situational awareness capability at the Defence Technology Agency of the New Zealand Defence Force. New Zealand has an important strategic position as the last land mass that many satellites selected for deorbiting pass before entering the Earth's atmosphere over the dedicated disposal area in the South Pacific. A preliminary analysis of the trial data has demonstrated that relatively inexpensive equipment can be used to successfully detect satellites at moderate altitudes. A total of 60 satellite passes were observed over the five nights of observation and about 2600 images were collected. A combination of cooled CCD and standard DSLR cameras were used, with a selection of lenses between 17 mm and 50 mm in focal length, covering a relatively wide field of view of 25 to 60 degrees. The CCD cameras were equipped with custom-made GPS modules to record the time of exposure with a high accuracy of one millisecond, or better. Specialised software has been developed for automated astrometric analysis of the trial data. The astrometric solution is obtained as a two-dimensional least-squares polynomial fit to the measured pixel positions of a large number of stars (typically 1000) detected across the image. The star identification is fully automated and works well for all camera-lens combinations used in the trial. A moderate polynomial degree of 3 to 5 is selected to take into account any image distortions introduced by the lens. A typical RMS

  20. TESIS experiment on XUV imaging spectroscopy of the Sun onboard the CORONAS-PHOTON satellite

    Science.gov (United States)

    Kuzin, S. V.; Zhitnik, I. A.; Bogachev, S. A.; Shestov, S. V.; Bugaenko, O. I.; Suhodrev, N. K.; Pertsov, A. A.; Mitrofanov, A. V.; Ignat'ev, A. P.; Slemzin, V. A.

    We present a brief description of new complex of space telescopes and spectrographs, TESIS, which will be placed aboard the CORONAS-PHOTON satellite. The complex is intended for high-resolution imaging observation of full Sun in the coronal spectral lines and in the spectral lines of the solar transition region. TESIS will be launched at the end of 2007 - early of 2008. About 25 % of the daily TESIS images will be free for use and for downloading from the TESIS data center that is planned to open 2 months before the TESIS launching at http://www.tesis.lebedev.ru

  1. Estimation of Leaf Area Index Using IRS Satellite Images

    Directory of Open Access Journals (Sweden)

    A Faridhosseini

    2012-12-01

    Full Text Available Estimation of vegetation cover attributes, such as the Leaf Area Index (LAI, is an important step in identifying the amount of water use for some plants. The goal of this study is to investigate the feasibility of using IRS LISS-III data to retrieve LAI. To get a LAI retrieval model based on reflectance and vegetation index, detailed field data were collected in the study area of eastern Iran. In this study, atmospheric corrected IRS LISS-III imagery was used to calculate Normalized Difference Vegetation Index (NDVI. Data of 50 samples of LAI were measured by Sun Scan System – SS1 in the study area. In situ measurements of LAI were related to widely use spectral vegetation indices (NDVI. The best model through analyzing the results was LAI = 19.305×NDVI+5.514 using the method of linear-regression analysis. The results showed that the correlation coefficient R2 was 0.534 and RMSE was 0.67. Thereby, suggesting that, when using remote sensing NDVI for LAI estimation, not only is the choice of NDVI of importance but also prior knowledge of plant architecture and soil background. Hence, some kind of landscape stratification is required before using multi- spectral imagery for large-scale mapping of vegetation biophysical variables.

  2. Floods, floodplains, delta plains — A satellite imaging approach

    Science.gov (United States)

    Syvitski, James P. M.; Overeem, Irina; Brakenridge, G. Robert; Hannon, Mark

    2012-08-01

    Thirty-three lowland floodplains and their associated delta plains are characterized with data from three remote sensing systems (AMSR-E, SRTM and MODIS). These data provide new quantitative information to characterize Late Quaternary floodplain landscapes and their penchant for flooding over the last decade. Daily proxy records for discharge since 2002 and for each of the 33 river systems can be derived with novel Advanced Microwave Scanning Radiometer (AMSR-E) methods. A descriptive framework based on analysis of Shuttle Radar Topography Mission (SRTM) data is used to capture the major landscape-scale floodplain elements or zones: 1) container valleys with their long and narrow pathways of largely sediment transit and bypass, 2) floodplain depressions that act as loci for frequent flooding and sediment storage, 3) zones of nodal avulsions common to many continental scale rivers, and often located seaward of container valleys, and 4) coastal floodplains and delta plains that offer both sediment bypass and storage but under the influence of marine processes. The SRTM data allow mapping of smaller-scale architectural elements in unprecedented systematic manner. Floodplain depressions were found to play a major role, which may largely be overlooked in conceptual floodplain models. Lastly, MODIS data (independently and combined with AMSR-E) allows the tracking of flood hydrographs and pathways and sedimentation patterns on a near-daily timescale worldwide. These remote-sensing data show that 85% of the studied major river systems experienced extensive flooding in the last decade. A new quantitative paradigm of floodplain processes, honoring the frequency and extent of floods, can be develop by careful analysis of these new remotely sensed data.

  3. Exploring image data assimilation in the prospect of high-resolution satellite oceanic observations

    Science.gov (United States)

    Durán Moro, Marina; Brankart, Jean-Michel; Brasseur, Pierre; Verron, Jacques

    2017-07-01

    Satellite sensors increasingly provide high-resolution (HR) observations of the ocean. They supply observations of sea surface height (SSH) and of tracers of the dynamics such as sea surface salinity (SSS) and sea surface temperature (SST). In particular, the Surface Water Ocean Topography (SWOT) mission will provide measurements of the surface ocean topography at very high-resolution (HR) delivering unprecedented information on the meso-scale and submeso-scale dynamics. This study investigates the feasibility to use these measurements to reconstruct meso-scale features simulated by numerical models, in particular on the vertical dimension. A methodology to reconstruct three-dimensional (3D) multivariate meso-scale scenes is developed by using a HR numerical model of the Solomon Sea region. An inverse problem is defined in the framework of a twin experiment where synthetic observations are used. A true state is chosen among the 3D multivariate states which is considered as a reference state. In order to correct a first guess of this true state, a two-step analysis is carried out. A probability distribution of the first guess is defined and updated at each step of the analysis: (i) the first step applies the analysis scheme of a reduced-order Kalman filter to update the first guess probability distribution using SSH observation; (ii) the second step minimizes a cost function using observations of HR image structure and a new probability distribution is estimated. The analysis is extended to the vertical dimension using 3D multivariate empirical orthogonal functions (EOFs) and the probabilistic approach allows the update of the probability distribution through the two-step analysis. Experiments show that the proposed technique succeeds in correcting a multivariate state using meso-scale and submeso-scale information contained in HR SSH and image structure observations. It also demonstrates how the surface information can be used to reconstruct the ocean state below

  4. Accelerating Satellite Image Based Large-Scale Settlement Detection with GPU

    Energy Technology Data Exchange (ETDEWEB)

    Patlolla, Dilip Reddy [ORNL; Cheriyadat, Anil M [ORNL; Weaver, Jeanette E [ORNL; Bright, Eddie A [ORNL

    2012-01-01

    Computer vision algorithms for image analysis are often computationally demanding. Application of such algorithms on large image databases\\---- such as the high-resolution satellite imagery covering the entire land surface, can easily saturate the computational capabilities of conventional CPUs. There is a great demand for vision algorithms running on high performance computing (HPC) architecture capable of processing petascale image data. We exploit the parallel processing capability of GPUs to present a GPU-friendly algorithm for robust and efficient detection of settlements from large-scale high-resolution satellite imagery. Feature descriptor generation is an expensive, but a key step in automated scene analysis. To address this challenge, we present GPU implementations for three different feature descriptors\\-- multiscale Historgram of Oriented Gradients (HOG), Gray Level Co-Occurrence Matrix (GLCM) Contrast and local pixel intensity statistics. We perform extensive experimental evaluations of our implementation using diverse and large image datasets. Our GPU implementation of the feature descriptor algorithms results in speedups of 220 times compared to the CPU version. We present an highly efficient settlement detection system running on a multiGPU architecture capable of extracting human settlement regions from a city-scale sub-meter spatial resolution aerial imagery spanning roughly 1200 sq. kilometers in just 56 seconds with detection accuracy close to 90\\%. This remarkable speedup gained by our vision algorithm maintaining high detection accuracy clearly demonstrates that such computational advancements clearly hold the solution for petascale image analysis challenges.

  5. a New Algorithm for Void Filling in a Dsm from Stereo Satellite Images in Urban Areas

    Science.gov (United States)

    Gharib Bafghi, Z.; Tian, J.; d'Angelo, P.; Reinartz, P.

    2016-06-01

    Digital Surface Models (DSM) derived from stereo-pair satellite images are the main sources for many Geo-Informatics applications like 3D change detection, object classification and recognition. However since occlusion especially in urban scenes result in some deficiencies in the stereo matching phase, these DSMs contain some voids. In order to fill the voids a range of algorithms have been proposed, mainly including interpolation alone or along with auxiliary DSM. In this paper an algorithm for void filling in DSM from stereo satellite images has been developed. Unlike common previous approaches we didn't use any external DSM to fill the voids. Our proposed algorithm uses only the original images and the unfilled DSM itself. First a neighborhood around every void in the unfilled DSM and its corresponding area in multispectral image is defined. Then it is analysed to extract both spectral and geometric texture and accordingly to assign labels to each cell in the voids. This step contains three phases comprising shadow detection, height thresholding and image segmentation. Thus every cell in void has a label and is filled by the median value of its co-labelled neighbors. The results for datasets from WorldView-2 and IKONOS are shown and discussed.

  6. A NEW ALGORITHM FOR VOID FILLING IN A DSM FROM STEREO SATELLITE IMAGES IN URBAN AREAS

    Directory of Open Access Journals (Sweden)

    Z. Gharib Bafghi

    2016-06-01

    Full Text Available Digital Surface Models (DSM derived from stereo-pair satellite images are the main sources for many Geo-Informatics applications like 3D change detection, object classification and recognition. However since occlusion especially in urban scenes result in some deficiencies in the stereo matching phase, these DSMs contain some voids. In order to fill the voids a range of algorithms have been proposed, mainly including interpolation alone or along with auxiliary DSM. In this paper an algorithm for void filling in DSM from stereo satellite images has been developed. Unlike common previous approaches we didn’t use any external DSM to fill the voids. Our proposed algorithm uses only the original images and the unfilled DSM itself. First a neighborhood around every void in the unfilled DSM and its corresponding area in multispectral image is defined. Then it is analysed to extract both spectral and geometric texture and accordingly to assign labels to each cell in the voids. This step contains three phases comprising shadow detection, height thresholding and image segmentation. Thus every cell in void has a label and is filled by the median value of its co-labelled neighbors. The results for datasets from WorldView-2 and IKONOS are shown and discussed.

  7. Surveillance of waste disposal activity at sea using satellite ocean color imagers: GOCI and MODIS

    Science.gov (United States)

    Hong, Gi Hoon; Yang, Dong Beom; Lee, Hyun-Mi; Yang, Sung Ryull; Chung, Hee Woon; Kim, Chang Joon; Kim, Young-Il; Chung, Chang Soo; Ahn, Yu-Hwan; Park, Young-Je; Moon, Jeong-Eon

    2012-09-01

    Korean Geostationary Ocean Color Imager (GOCI) and Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua observations of the variation in ocean color at the sea surface were utilized to monitor the impact of nutrient-rich sewage sludge disposal in the oligotrophic area of the Yellow Sea. MODIS revealed that algal blooms persisted in the spring annually at the dump site in the Yellow Sea since year 2000 to the present. A number of implications of using products of the satellite ocean color imagers were exploited here based on the measurements in the Yellow Sea. GOCI observes almost every hour during the daylight period, every day since June 2011. Therefore, GOCI provides a powerful tool to monitor waste disposal at sea in real time. Tracking of disposal activity from a large tanker was possible hour by hour from the GOCI timeseries images compared to MODIS. Smaller changes in the color of the ocean surface can be easily observed, as GOCI resolves images at smaller scales in space and time in comparison to polar orbiting satellites, e.g., MODIS. GOCI may be widely used to monitor various marine activities in the sea, including waste disposal activity from ships.

  8. SATURNʼS INNER SATELLITES: ORBITS, MASSES, AND THE CHAOTIC MOTION OF ATLAS FROM NEW CASSINI IMAGING OBSERVATIONS

    National Research Council Canada - National Science Library

    Cooper, Nicholas J; Renner, Stéfan; Murray, Carl D; Evans, Michael W

    2015-01-01

    We present numerically derived orbits and mass estimates for the inner Saturnian satellites, Atlas, Prometheus, Pandora, Janus, and Epimetheus from a fit to 2580 new Cassini Imaging Science Subsystem...

  9. Tree detection in orchards from VHR satellite images using scale-space theory

    Science.gov (United States)

    Mahour, Milad; Tolpekin, Valentyn; Stein, Alfred

    2016-10-01

    This study focused on extracting reliable and detailed information from very High Resolution (VHR) satellite images for the detection of individual trees in orchards. The images contain detailed information on spectral and geometrical properties of trees. Their scale level, however, is insufficient for spectral properties of individual trees, because adjacent tree canopies interlock. We modeled trees using a bell shaped spectral profile. Identifying the brightest peak was challenging due to sun illumination effects caused 1 by differences in positions of the sun and the satellite sensor. Crown boundary detection was solved by using the NDVI from the same image. We used Gaussian scale-space methods that search for extrema in the scale-space domain. The procedures were tested on two orchards with different tree types, tree sizes and tree observation patterns in Iran. Validation was done using reference data derived from an UltraCam digital aerial photo. Local extrema of the determinant of the Hessian corresponded well to the geographical coordinates and the size of individual trees. False detections arising from a slight asymmetry of trees were distinguished from multiple detections of the same tree with different extents. Uncertainty assessment was carried out on the presence and spatial extents of individual trees. The study demonstrated how the suggested approach can be used for image segmentation for orchards with different types of trees. We concluded that Gaussian scale-space theory can be applied to extract information from VHR satellite images for individual tree detection. This may lead to improved decision making for irrigation and crop water requirement purposes in future studies.

  10. Best period for high spatial resolution satellite images for the detection of marks of buried structures

    Directory of Open Access Journals (Sweden)

    Dimitrios Kaimaris

    2012-06-01

    Full Text Available Improvements in sensor technology in recent decades led to the creation of ground, air and space imaging systems, whose data can be used in archaeological studies. Greece is one of the lucky areas that are rich in archaeological heritage. The detection of prehistoric/historic undiscovered constructions on satellite images or aerial photos is a complex and complicated matter. These marks are not visible from the ground, they can, however, be traced on satellite or aerial images, because of the differences in tone and texture. These differences appear as crop, soil and shadow marks. Undoubtedly, the detection of buried structures requires a suitable spatial resolution image, taken under appropriate meteorological conditions and during the best period of the vegetation growing cycle. According to the pertinent literature, detecting covered memorials may be achieved either accidentally or, usually, after a systematic investigation based on historical narratives. The purpose of this study is to determine the factors that facilitate or hinder the detection of buried structures through high spatial resolution satellite imagery. In this study, pan sharpened images from the QuickBird-2 satellite were used, of a spatial resolution of 0.60-0.70 m. This study concerns the detection of marks of the ancient Via Egnatia, from the ancient Amphipolis to Philippi (Eastern Macedonia, Greece. We studied different types of vegetation in the region and their phenological cycle. Taking into account the vegetation phenological cycle of the study area as well as the meteorological data, four pan sharpened QuickBird-2 images of a spatial resolution of 0.60–0.70 m. were used, during four different seasons. By processing the four images, we can determine the one acquired during the most appropriate conditions for the detection of buried structures. The application of this methodology in the study area had positive results, and not only was the main purpose of this

  11. Differential Spatio-temporal Multiband Satellite Image Clustering using K-means Optimization With Reinforcement Programming

    Directory of Open Access Journals (Sweden)

    Irene Erlyn Wina Rachmawan

    2015-06-01

    Full Text Available Deforestration is one of the crucial issues in Indonesia because now Indonesia has world's highest deforestation rate. In other hand, multispectral image delivers a great source of data for studying spatial and temporal changeability of the environmental such as deforestration area. This research present differential image processing methods for detecting nature change of deforestration. Our differential image processing algorithms extract and indicating area automatically. The feature of our proposed idea produce extracted information from multiband satellite image and calculate the area of deforestration by years with calculating data using temporal dataset. Yet, multiband satellite image consists of big data size that were difficult to be handled for segmentation. Commonly, K- Means clustering is considered to be a powerfull clustering algorithm because of its ability to clustering big data. However K-Means has sensitivity of its first generated centroids, which could lead into a bad performance. In this paper we propose a new approach to optimize K-Means clustering using Reinforcement Programming in order to clustering multispectral image. We build a new mechanism for generating initial centroids by implementing exploration and exploitation knowledge from Reinforcement Programming. This optimization will lead a better result for K-means data cluster. We select multispectral image from Landsat 7 in past ten years in Medawai, Borneo, Indonesia, and apply two segmentation areas consist of deforestration land and forest field. We made series of experiments and compared the experimental results of K-means using Reinforcement Programming as optimizing initiate centroid and normal K-means without optimization process. Keywords: Deforestration, Multispectral images, landsat, automatic clustering, K-means.

  12. Confocal Raman imaging study showing macrophage mediated biodegradation of graphene in vivo.

    Science.gov (United States)

    Girish, Chundayil Madathil; Sasidharan, Abhilash; Gowd, G Siddaramana; Nair, Shantikumar; Koyakutty, Manzoor

    2013-11-01

    This study is focused on the crucial issue of biodegradability of graphene under in vivo conditions. Characteristic Raman signatures of graphene are used to three dimensionally (3D) image its localization in lung, liver, kidney and spleen of mouse and identified gradual development of structural disorder, happening over a period of 3 months, as indicated by the formation of defect-related D'band, line broadening of D and G bands, increase in ID /IG ratio and overall intensity reduction. Prior to injection, the carboxyl functionalized graphene of lateral size ∼200 nm is well dispersed in aqueous medium, but 24 hours post injection, larger aggregates of size up to 10 μm are detected in various organs. Using Raman cluster imaging method, temporal development of disorder is detected from day 8 onwards, which begins from the edges and grows inwards over a period of 3 months. The biodegradation is found prominent in graphene phagocytosed by tissue-bound macrophages and the gene expression studies of pro-inflammatory cytokines indicated the possibility of phagocytic immune response. In addition, in vitro studies conducted on macrophage cell lines also show development of structural disorder in the engulfed graphene, reiterating the role of macrophages in biodegradation. This is the first report providing clear evidence of in vivo biodegradation of graphene and these results may radically change the perspective on potential biomedical applications of graphene.

  13. Semi-automatic verification of cropland and grassland using very high resolution mono-temporal satellite images

    Science.gov (United States)

    Helmholz, Petra; Rottensteiner, Franz; Heipke, Christian

    2014-11-01

    Many public and private decisions rely on geospatial information stored in a GIS database. For good decision making this information has to be complete, consistent, accurate and up-to-date. In this paper we introduce a new approach for the semi-automatic verification of a specific part of the, possibly outdated GIS database, namely cropland and grassland objects, using mono-temporal very high resolution (VHR) multispectral satellite images. The approach consists of two steps: first, a supervised pixel-based classification based on a Markov Random Field is employed to extract image regions which contain agricultural areas (without distinction between cropland and grassland), and these regions are intersected with boundaries of the agricultural objects from the GIS database. Subsequently, GIS objects labelled as cropland or grassland in the database and showing agricultural areas in the image are subdivided into different homogeneous regions by means of image segmentation, followed by a classification of these segments into either cropland or grassland using a Support Vector Machine. The classification result of all segments belonging to one GIS object are finally merged and compared with the GIS database label. The developed approach was tested on a number of images. The evaluation shows that errors in the GIS database can be significantly reduced while also speeding up the whole verification task when compared to a manual process.

  14. Post launch calibration and testing of the Advanced Baseline Imager on the GOES-R satellite

    Science.gov (United States)

    Lebair, William; Rollins, C.; Kline, John; Todirita, M.; Kronenwetter, J.

    2016-05-01

    The Geostationary Operational Environmental Satellite R (GOES-R) series is the planned next generation of operational weather satellites for the United State's National Oceanic and Atmospheric Administration. The first launch of the GOES-R series is planned for October 2016. The GOES-R series satellites and instruments are being developed by the National Aeronautics and Space Administration (NASA). One of the key instruments on the GOES-R series is the Advance Baseline Imager (ABI). The ABI is a multi-channel, visible through infrared, passive imaging radiometer. The ABI will provide moderate spatial and spectral resolution at high temporal and radiometric resolution to accurately monitor rapidly changing weather. Initial on-orbit calibration and performance characterization is crucial to establishing baseline used to maintain performance throughout mission life. A series of tests has been planned to establish the post launch performance and establish the parameters needed to process the data in the Ground Processing Algorithm. The large number of detectors for each channel required to provide the needed temporal coverage presents unique challenges for accurately calibrating ABI and minimizing striping. This paper discusses the planned tests to be performed on ABI over the six-month Post Launch Test period and the expected performance as it relates to ground tests.

  15. Utilizing Chinese high-resolution satellite images for inspection of unauthorized constructions in Beijing

    Institute of Scientific and Technical Information of China (English)

    LI DeRen; WANG Mi; HU Fen

    2009-01-01

    After Beijing wins the bit to host the 29th Olympic Games, in order to manifest the technical support advantages and capabilities of the autonomously-developed RS and GIS based change detection techniques in 2008 Beijing Olympic Games, and from the standpoints of executing new city planning, relieving the traffic congestion as well as maintaining the historic features, an automatic satellite monitoring system has been studied and established to accomplish the mission of unauthorized construction inspection within the Sixth Ring Road of Beijing city quarterly, by adopting the CBERS-2 satellite images and combining technologies of GIS, GPS, etc. This article discusses the applicable procedures and key issues when utilizing such Chinese satellite images and relevant techniques to discover the illegal constructions, and introduces the monitoring system from both the design and implementation aspects; additionally, some typical application cases in the practice of the system are also illustrated. The monitoring system can timely supply abundant information to facilitate the policy-making of relevant planning departments, thus providing consolidate technical support to eliminate the illegal constructing behaviors in the blossom. During the five years' excellent performance, it has helped China save large amounts of expenditures for processing of unauthorized constructed buildings.

  16. Satellite image processing for precision agriculture and agroindustry using convolutional neural network and genetic algorithm

    Science.gov (United States)

    Firdaus; Arkeman, Y.; Buono, A.; Hermadi, I.

    2017-01-01

    Translating satellite imagery to a useful data for decision making during this time are usually done manually by human. In this research, we are going to translate satellite imagery by using artificial intelligence method specifically using convolutional neural network and genetic algorithm to become a useful data for decision making, especially for precision agriculture and agroindustry. In this research, we are focused on how to made a sustainable land use planning with 3 objectives. The first is maximizing economic factor. Second is minimizing CO2 emission and the last is minimizing land degradation. Results show that by using artificial intelligence method, can produced a good pareto optimum solutions in a short time.

  17. A graph-based approach to detect spatiotemporal dynamics in satellite image time series

    Science.gov (United States)

    Guttler, Fabio; Ienco, Dino; Nin, Jordi; Teisseire, Maguelonne; Poncelet, Pascal

    2017-08-01

    Enhancing the frequency of satellite acquisitions represents a key issue for Earth Observation community nowadays. Repeated observations are crucial for monitoring purposes, particularly when intra-annual process should be taken into account. Time series of images constitute a valuable source of information in these cases. The goal of this paper is to propose a new methodological framework to automatically detect and extract spatiotemporal information from satellite image time series (SITS). Existing methods dealing with such kind of data are usually classification-oriented and cannot provide information about evolutions and temporal behaviors. In this paper we propose a graph-based strategy that combines object-based image analysis (OBIA) with data mining techniques. Image objects computed at each individual timestamp are connected across the time series and generates a set of evolution graphs. Each evolution graph is associated to a particular area within the study site and stores information about its temporal evolution. Such information can be deeply explored at the evolution graph scale or used to compare the graphs and supply a general picture at the study site scale. We validated our framework on two study sites located in the South of France and involving different types of natural, semi-natural and agricultural areas. The results obtained from a Landsat SITS support the quality of the methodological approach and illustrate how the framework can be employed to extract and characterize spatiotemporal dynamics.

  18. Multi Resolution Analysis (MRA of satellite images of oil spill disasters

    Directory of Open Access Journals (Sweden)

    Rashid Hussain

    2014-09-01

    Full Text Available Oil spill disasters monitoring and mitigation requires availability of state of the art applications and tools. Conventional technology gets benefit from latest trends and research in satellite imaginary. This research highlights multi-resolution wavelet analysis of satellite images of oil spill disasters. Multi-resolution analysis is one of the powerful techniques to analyze information content of images. This analysis enables us to have a scale-invariant interpretation of the image. At each resolution level, both smooth and detailed signals carry all the necessary information to reconstruct the smooth signal at the next level. The wavelet decomposition results in detail and approximate threshold coefficients. Multi resolution wavelet decomposition is used to analyze the image in both time and frequency domain. It provides better frequency resolution and poor time resolution for lower frequency; better time resolution and poor frequency resolution for higher frequency. This condition is fortunately suited for real applications; as signals have high frequency components for very short period of the interval and low frequency components for longer durations.

  19. Amazon Rainforest Deforestation Daily Detection Tool Using Artificial Neural Networks and Satellite Images

    Directory of Open Access Journals (Sweden)

    Silvio César Cazella

    2012-10-01

    Full Text Available The main purpose of this work was the development of a tool to detect daily deforestation in the Amazon rainforest, using satellite images from the MODIS/TERRA [1] sensor and Artificial Neural Networks. The developed tool provides the parameterization of the configuration for the neural network training to enable us to find the best neural architecture to address the problem. The tool makes use of confusion matrixes to determine the degree of success of the network. Part of the municipality of Porto Velho, in Rondônia state, is located inside the tile H11V09 of the MODIS/TERRA sensor, which was used as the study area. A spectrum-temporal analysis of this area was made on 57 images from 20 of May to 15 of July 2003 using the trained neural network. This analysis allowed us to verify the quality of the implemented neural network classification as well as helping our understanding of the dynamics of deforestation in the Amazon rainforest. The great potential of neural networks for image classification was perceived with this work. However, the generation of consistent alarms, in other words, detecting predatory actions at the beginning; instead of firing false alarms is a complex task that has not yet been solved. Therefore, the major contribution of this paper is to provide a theoretical basis and practical use of neural networks and satellite images to combat illegal deforestation.

  20. Volumetric and two-dimensional image interpretation show different cognitive processes in learners

    NARCIS (Netherlands)

    van der Gijp, Anouk; Ravesloot, C.J.; van der Schaaf, Marieke F; van der Schaaf, Irene C; Huige, Josephine C B M; Vincken, Koen L; Ten Cate, Olle Th J; van Schaik, JPJ

    2015-01-01

    RATIONALE AND OBJECTIVES: In current practice, radiologists interpret digital images, including a substantial amount of volumetric images. We hypothesized that interpretation of a stack of a volumetric data set demands different skills than interpretation of two-dimensional (2D) cross-sectional imag

  1. Triple Linear-array Imaging Geometry Model of ZiYuan-3 Surveying Satellite and its Validation

    Directory of Open Access Journals (Sweden)

    TANG Xinming

    2012-04-01

    Full Text Available The ZiYuan-3 (ZY-3 surveying satellite is the first civilian high-resolution stereo mapping satellite of China. Its objective is oriented to plot the 1:50,000 and 1:25,000 topographic maps. Comparing with foreign commercial mapping satellite imagery, the establishment of our own imaging geometry model is the core technical problem for different products and various applications of ZY-3 surveying satellite. This paper analyses the key problem on precision geometry processing based on the overall design, and proposes the ZY-3 Surveying satellite imaging geometry model with the technology of virtual CCD line-array imaging. In addition, this paper utilizes the first orbit imagery of ZY-3 satellite with coverage of the region of Dalian, and produces forward, backward and nadir cameras calibration products. Different ground control points are selected for the block adjustment experiment, and the Digital Surface Model (DSM, Digital Ortho Map (DOM are generated. The accuracy is validated by check points. It can be seen from the experiment that the planar and vertical accuracy are better than 3 meters and 2 meters, respectively. The experiment demonstrates the effectiveness of ZY-3 surveying satellite imaging geometry model

  2. Automatic geolocation of targets tracked by aerial imaging platforms using satellite imagery

    Science.gov (United States)

    Shukla, P. K.; Goel, S.; Singh, P.; Lohani, B.

    2014-11-01

    Tracking of targets from aerial platforms is an important activity in several applications, especially surveillance. Knowled ge of geolocation of these targets adds additional significant and useful information to the application. This paper determines the geolocation of a target being tracked from an aerial platform using the technique of image registration. Current approaches utilize a POS to determine the location of the aerial platform and then use the same for geolocation of the targets using the principle of photogrammetry. The constraints of cost and low-payload restrict the applicability of this approach using UAV platforms. This paper proposes a methodology for determining the geolocation of a target tracked from an aerial platform in a partially GPS devoid environment. The method utilises automatic feature based registration technique of a georeferenced satellite image with an ae rial image which is already stored in UAV's database to retrieve the geolocation of the target. Since it is easier to register subsequent aerial images due to similar viewing parameters, the subsequent overlapping images are registered together sequentially thus resulting in the registration of each of the images with georeferenced satellite image thus leading to geolocation of the target under interest. Using the proposed approach, the target can be tracked in all the frames in which it is visible. The proposed concept is verified experimentally and the results are found satisfactory. Using the proposed method, a user can obtain location of target of interest as well features on ground without requiring any POS on-board the aerial platform. The proposed approach has applications in surveillance for target tracking, target geolocation as well as in disaster management projects like search and rescue operations.

  3. Exploitation of amplitude and phase of satellite SAR images for landslide mapping: the case of Montescaglioso (South Italy)

    Science.gov (United States)

    Raspini, Federico; Ciampalini, Andrea; Lombardi, Luca; Nocentini, Massimiliano; Gigli, Giovanni; Casagli, Nicola; Del Conte, Sara; Ferretti, Alessandro

    2016-04-01

    Pre- event and event landslide deformations have been detected and measured for the landslide that occurred on 3 December 2013 on the south-western slope of the Montescaglioso village (Basilicata Region, southern Italy). The event, triggered by prolonged rainfalls, created significant damage to buildings and local infrastructures. Ground displacements have been mapped through an integrated analysis based on a series of high resolution SAR (Synthetic Aperture Radar) images acquired by the Italian constellation of satellites COSMO-SkyMed. Analysis has been performed by exploiting both phase (through multi-image SAR interferometry) and amplitude information (through speckle tracking techniques) of the satellite images. SAR Interferometry, applied to images taken before the event, revealed a general pre-event movement, in the order of a few mm/yr, in the south-western slope of the Montescaglioso village. Highest pre-event velocities, ranging between 8 and 12 mm/yr, have been recorded in the sector of the slope where the first movement of the landslide took place. Speckle tracking, applied to images acquired before and after the event, allowed the retrieval of the 3D deformation field produced by the landslide. It also showed that ground displacements produced by the landslide have a dominant SSW component, with values exceeding 10 m for large sectors of the landslide area, with local peaks of 20 m in its central and deposit areas. Two minor landslides with a dominant SSE direction, which were detected in the upper parts of the slope, likely also occurred as secondary phenomena as consequence of the SSW movement of the main Montescaglioso landslide. This work demonstrates that this complementary approach, based on the synergistic exploitation of phase and amplitude SAR data, can become a powerful tool for landslide investigation, allowing the detection of slow, precursory deformation patterns as well the retrieval of full 3D surface displacement fields caused by large

  4. Solar resources estimation combining digital terrain models and satellite images techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bosch, J.L.; Batlles, F.J. [Universidad de Almeria, Departamento de Fisica Aplicada, Ctra. Sacramento s/n, 04120-Almeria (Spain); Zarzalejo, L.F. [CIEMAT, Departamento de Energia, Madrid (Spain); Lopez, G. [EPS-Universidad de Huelva, Departamento de Ingenieria Electrica y Termica, Huelva (Spain)

    2010-12-15

    One of the most important steps to make use of any renewable energy is to perform an accurate estimation of the resource that has to be exploited. In the designing process of both active and passive solar energy systems, radiation data is required for the site, with proper spatial resolution. Generally, a radiometric stations network is used in this evaluation, but when they are too dispersed or not available for the study area, satellite images can be utilized as indirect solar radiation measurements. Although satellite images cover wide areas with a good acquisition frequency they usually have a poor spatial resolution limited by the size of the image pixel, and irradiation must be interpolated to evaluate solar irradiation at a sub-pixel scale. When pixels are located in flat and homogeneous areas, correlation of solar irradiation is relatively high, and classic interpolation can provide a good estimation. However, in complex topography zones, data interpolation is not adequate and the use of Digital Terrain Model (DTM) information can be helpful. In this work, daily solar irradiation is estimated for a wide mountainous area using a combination of Meteosat satellite images and a DTM, with the advantage of avoiding the necessity of ground measurements. This methodology utilizes a modified Heliosat-2 model, and applies for all sky conditions; it also introduces a horizon calculation of the DTM points and accounts for the effect of snow covers. Model performance has been evaluated against data measured in 12 radiometric stations, with results in terms of the Root Mean Square Error (RMSE) of 10%, and a Mean Bias Error (MBE) of +2%, both expressed as a percentage of the mean value measured. (author)

  5. Satellite Remote Sensing Image Analysis Technology Based on eCognition%基于eCognition的卫星遥感影像分析技术

    Institute of Scientific and Technical Information of China (English)

    孙悦

    2014-01-01

    The satellite remote sensing image analysis is a research hotspot in recent years. In this paper,the current progress of information extraction technology on satellite sensing images is analyzed,the advantage of object-oriented high-resolution image analysis is highlighted,and the application of target change detection of satellite sensing images in military field is introduced. In this paper,the object-oriented multiscale segmentation strategy is used in the field of satellite remote sensing image processing,and secondary develop-ment processes is implemented based on eCognition SDK. The results of multiple experiments show that the proposed satellite remote sensing image analysis technology can implement better information extraction and analysis.%卫星遥感影像分析技术是近年来的一个研究热点问题。归纳总结了遥感影像信息提取技术的发展现状,阐述了面向对象的高分辨率遥感影像分析技术的优势,介绍了遥感影像目标变化检测技术的应用情况。将面向对象的多尺度分割策略应用在卫星遥感影像处理领域,实现了基于eCognition SDK的二次开发流程,取得了良好的实验效果。

  6. Detection and Extraction of Roads from High Resolution Satellites Images with Dynamic Programming

    Science.gov (United States)

    Benzouai, Siham; Smara, Youcef

    2010-12-01

    The advent of satellite images allows now a regular and a fast digitizing and update of geographic data, especially roads which are very useful for Geographic Information Systems (GIS) applications such as transportation, urban pollution, geomarketing, etc. For this, several studies have been conducted to automate roads extraction in order to minimize the manual processes [4]. In this work, we are interested in roads extraction from satellite imagery with high spatial resolution (at best equal to 10 m). The method is semi automatic and follows a linear approach where road is considered as a linear object. As roads extraction is a pattern recognition problem, it is useful, above all, to characterize roads. After, we realize a pre-processing by applying an Infinite Size Edge Filter -ISEF- and processing method based on dynamic programming concept, in particular, Fishler algorithm designed by F*.

  7. Volumetric and two-dimensional image interpretation show different cognitive processes in learners.

    Science.gov (United States)

    van der Gijp, Anouk; Ravesloot, Cécile J; van der Schaaf, Marieke F; van der Schaaf, Irene C; Huige, Josephine C B M; Vincken, Koen L; Ten Cate, Olle Th J; van Schaik, Jan P J

    2015-05-01

    In current practice, radiologists interpret digital images, including a substantial amount of volumetric images. We hypothesized that interpretation of a stack of a volumetric data set demands different skills than interpretation of two-dimensional (2D) cross-sectional images. This study aimed to investigate and compare knowledge and skills used for interpretation of volumetric versus 2D images. Twenty radiology clerks were asked to think out loud while reading four or five volumetric computed tomography (CT) images in stack mode and four or five 2D CT images. Cases were presented in a digital testing program allowing stack viewing of volumetric data sets and changing views and window settings. Thoughts verbalized by the participants were registered and coded by a framework of knowledge and skills concerning three components: perception, analysis, and synthesis. The components were subdivided into 16 discrete knowledge and skill elements. A within-subject analysis was performed to compare cognitive processes during volumetric image readings versus 2D cross-sectional image readings. Most utterances contained knowledge and skills concerning perception (46%). A smaller part involved synthesis (31%) and analysis (23%). More utterances regarded perception in volumetric image interpretation than in 2D image interpretation (Median 48% vs 35%; z = -3.9; P Cognitive processes in volumetric and 2D cross-sectional image interpretation differ substantially. Volumetric image interpretation draws predominantly on perceptual processes, whereas 2D image interpretation is mainly characterized by synthesis. The results encourage the use of volumetric images for teaching and testing perceptual skills. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

  8. Viewing television shows containing ideal and neutral body images while exercising: does type of body image content influence exercise performance and body image in women?

    Science.gov (United States)

    Hall, Eric E; Baird, Seanna A; Gilbert, Danielle N; Miller, Paul C; Bixby, Walter R

    2011-09-01

    This study examined how exposure to media containing different body image content while exercising influenced exercise performance and feelings concerning appearance. 41 females completed two sessions of cycling (30 minutes). During exercise, participants viewed a television show that contained either media-portrayed ideal or neutral female body images. There were no differences in exercise performance between conditions. Physical appearance state anxiety (PASA) decreased post-exercise. After viewing ideal bodies, participants scored higher on appearance and comparison processing. The high internalization group scored higher on appearance and comparison processing and PASA increased following ideal body image content while the low internalization group decreased.

  9. Fast Road Network Extraction in Satellite Images Using Mathematical Morphology and Markov Random Fields

    Directory of Open Access Journals (Sweden)

    Thierry Géraud

    2004-12-01

    Full Text Available We present a fast method for road network extraction in satellite images. It can be seen as a transposition of the segmentation scheme “watershed transform + region adjacency graph + Markov random fields” to the extraction of curvilinear objects. Many road extractors which are composed of two stages can be found in the literature. The first one acts like a filter that can decide from a local analysis, at every image point, if there is a road or not. The second stage aims at obtaining the road network structure. In the method we propose to rely on a “potential” image, that is, unstructured image data that can be derived from any road extractor filter. In such a potential image, the value assigned to a point is a measure of its likelihood to be located in the middle of a road. A filtering step applied on the potential image relies on the area closing operator followed by the watershed transform to obtain a connected line which encloses the road network. Then a graph describing adjacency relationships between watershed lines is built. Defining Markov random fields upon this graph, associated with an energetic model of road networks, leads to the expression of road network extraction as a global energy minimization problem. This method can easily be adapted to other image processing fields, where the recognition of curvilinear structures is involved.

  10. Comparision of Clustering Algorithms usingNeural Network Classifier for Satellite Image Classification

    Directory of Open Access Journals (Sweden)

    S.Praveena

    2015-06-01

    Full Text Available This paper presents a hybrid clustering algorithm and feed-forward neural network classifier for land-cover mapping of trees, shade, building and road. It starts with the single step preprocessing procedure to make the image suitable for segmentation. The pre-processed image is segmented using the hybrid genetic-Artificial Bee Colony(ABC algorithm that is developed by hybridizing the ABC and FCM to obtain the effective segmentation in satellite image and classified using neural network . The performance of the proposed hybrid algorithm is compared with the algorithms like, k-means, Fuzzy C means(FCM, Moving K-means, Artificial Bee Colony(ABC algorithm, ABC-GA algorithm, Moving KFCM and KFCM algorithm.

  11. Object-Based Forest Cover Monitoring Using GAOFEN-2 High Resolution Satellite Images

    Science.gov (United States)

    Li, S. M.; Li, Z. Y.; Chen, E. X.; Liu, Q. W.

    2016-10-01

    Forest cover monitoring is an important part of forest management in local or regional area. The structure and tones of forest can be identified in high spatial remote sensing images. When forests cover change, the spectral characteristics of forests is also changed. In this paper a method on object-based forest cover monitoring with data transformation from time series of high resolution images is put forward. First the NDVI difference image and the composite of PC3,PC4, PC5 of the stacked 8 layers of time series of high resolution satellites are segmented into homogeneous objects. With development of the object-based ruleset classification system, the spatial extent of deforestation and afforestation can be identified over time across the landscape. Finally the change accuracy is achieved with reference data.

  12. High-resolution satellite image segmentation using Hölder exponents

    Indian Academy of Sciences (India)

    Debasish Chakraborty; Gautam Kumar Sen; Sugata Hazra

    2009-10-01

    Texture in high-resolution satellite images requires substantial amendment in the conventional segmentation algorithms. A measure is proposed to compute the Hölder exponent (HE) to assess the roughness or smoothness around each pixel of the image. The localized singularity information is incorporated in computing the HE. An optimum window size is evaluated so that HE reacts to localized singularity. A two-step iterative procedure for clustering the transformed HE image is adapted to identify the range of HE, densely occupied in the kernel and to partition Hölder exponents into a cluster that matches with the range. Hölder exponent values (noise or not associated with the other cluster) are clubbed to a nearest possible cluster using the local maximum likelihood analysis.

  13. Recognization of Satellite Images of Large Scale Data Based on Map- Reduce Framework

    Directory of Open Access Journals (Sweden)

    Vidya Jadhav,

    2014-03-01

    Full Text Available Today in the world of cloud and grid computing integration of data from heterogeneous databases is inevitable.This will become complex when size of the database is very large. M-R is a new framework specifically designed for processing huge datasets on distributed sources. Apache’s Hadoop is an implementation of M-R.Currently Hadoop has been applied successfully for file based datasets. This project proposes to utilize the parallel and distributed processing capability of Hadoop M-R for handling Images on large datasets.The presented methodology of land-cover recognition provides a scalable solution for automatic satellite imagery analysis, especially when GIS data is not readily available, or surface change may occur due to catastrophic events such as flooding, hurricane, and snow storm, etc.Here,we are using algorithms such as Image Differentiation,Image Duplication,Zoom-In,Gray-Scale.

  14. Space situational awareness satellites and ground based radiation counting and imaging detector technology

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, Frank, E-mail: frank.jansen@dlr.de [DLR Institute of Space Systems, Robert-Hooke-Str. 7, 28359 Bremen (Germany); Behrens, Joerg [DLR Institute of Space Systems, Robert-Hooke-Str. 7, 28359 Bremen (Germany); Pospisil, Stanislav [Czech Technical University, IEAP, 12800 Prague 2, Horska 3a/22 (Czech Republic); Kudela, Karel [Slovak Academy of Sciences, IEP, 04001 Kosice, Watsonova 47 (Slovakia)

    2011-05-15

    We review the current status from the scientific and technological point of view of solar energetic particles, solar and galactic cosmic ray measurements as well as high energy UV-, X- and gamma-ray imaging of the Sun. These particles and electromagnetic data are an important tool for space situational awareness (SSA) aspects like space weather storm predictions to avoid failures in space, air and ground based technological systems. Real time data acquisition, position and energy sensitive imaging are demanded by the international space weather forecast services. We present how newly developed, highly miniaturized radiation detectors can find application in space in view of future SSA related satellites as a novel space application due to their counting and imaging capabilities.

  15. The Black Sea coastal zone in the high resolution satellite images

    Science.gov (United States)

    Yurovskaya, Maria; Dulov, Vladimir; Kozlov, Igor

    2016-04-01

    Landsat data with spatial resolution of 30-100 m provide the ability of regular monitoring of ocean phenomena with scale of 100-1000 m. Sentinel-1 is equipped with C-band synthetic aperture radar. The images allow recognizing the features that affect either the sea surface roughness, or its color characteristics. The possibilities of using the high spatial resolution satellite data are considered for observation and monitoring of Crimean coastal zone. The analyzed database includes all Landsat-8 (Level 1) multi-channel images from January 2013 to August 2015 and all Sentinel-1 radar images in May-August 2015. The goal of the study is to characterize the descriptiveness of these data for research and monitoring of the Crimean coastal areas. The observed marine effects are reviewed and the physical mechanisms of their signatures in the satellite images are described. The effects associated with the roughness variability are usually manifested in all bands, while the subsurface phenomena are visible only in optical data. Confidently observed structures include internal wave trains, filamentous natural slicks, which reflect the eddy coastal dynamics, traces of moving ships and the oil films referred to anthropogenic pollution of marine environment. The temperature fronts in calm conditions occur due to surfactant accumulation in convergence zone. The features in roughness field can also be manifested in Sentinel-1 data. Subsurface processes observed in Landsat-8 images primarily include transport and distribution of suspended matter as a result of floods and sandy beach erosion. The surfactant always concentrates on the sea surface in contaminated areas, so that these events are also observed in Sentinel-1 images. A search of wastewater discharge manifestations is performed. The investigation provides the basis for further development of approaches to obtain quantitative characteristics of the phenomena themselves. Funding by Russian Science Foundation under grant 15

  16. Satellite Images for Monitoring Mangrove Cover Changes in a Fast Growing Economic Region in Southern Peninsular Malaysia

    Directory of Open Access Journals (Sweden)

    Kasturi Devi Kanniah

    2015-10-01

    Full Text Available Effective monitoring is necessary to conserve mangroves from further loss in Malaysia. In this context, remote sensing is capable of providing information on mangrove status and changes over a large spatial extent and in a continuous manner. In this study we used Landsat satellite images to analyze the changes over a period of 25 years of mangrove areas in Iskandar Malaysia (IM, the fastest growing national special economic region located in southern Johor, Malaysia. We tested the use of two widely used digital classification techniques to classify mangrove areas. The Maximum Likelihood Classification (MLC technique provided significantly higher user, producer and overall accuracies and less “salt and pepper effects” compared to the Support Vector Machine (SVM technique. The classified satellite images using the MLC technique showed that IM lost 6740 ha of mangrove areas from 1989 to 2014. Nevertheless, a gain of 710 ha of mangroves was observed in this region, resulting in a net loss of 6030 ha or 33%. The loss of about 241 ha per year of mangroves was associated with a steady increase in urban land use (1225 ha per year from 1989 until 2014. Action is necessary to protect the existing mangrove cover from further loss. Gazetting of the remaining mangrove sites as protected areas or forest reserves and introducing tourism activities in mangrove areas can ensure the continued survival of mangroves in IM.

  17. Nexus of Health and Development: Modelling Crude Birth Rate and Maternal Mortality Ratio Using Nighttime Satellite Images

    Directory of Open Access Journals (Sweden)

    Koel Roychowdhury

    2014-05-01

    Full Text Available Health and development are intricately related. Although India has made significant progress in the last few decades in the health sector and overall growth in GDP, there are still large regional differences in both health and development. The main objective of this paper is to develop techniques for the prediction of health indicators for all the districts of India and examine the correlations between health and development. The level of electrification and district domestic product (DDP are considered as two fundamental indicators of development in this research. These data, along with health metrics and the information from two nighttime satellite images, were used to propose the models. These successfully predicted the health indicators with less than a 7%–10% error. The chosen health metrics, such as crude birth rate (CBR and maternal mortality rate (MMR, were mapped for the whole country at the district level. These metrics showed very strong correlation with development indicators (correlation coefficients ranging from 0.92 to 0.99 at the 99% confidence interval. This is the first attempt to use Visible Infrared Imaging Radiometer Suite (VIIRS (satellite imagery in a socio-economic study. This paper endorses the observation that areas with a higher DDP and level of electrification have overall better health conditions.

  18. Determination of quasi-static microaccelerations onboard a satellite using video images of moving objects

    Science.gov (United States)

    Levtov, V. L.; Romanov, V. V.; Boguslavsky, A. A.; Sazonov, V. V.; Sokolov, S. M.; Glotov, Yu. N.

    2009-12-01

    A space experiment aimed at determination of quasi-static microaccelerations onboard an artificial satellite of the Earth using video images of the objects executing free motion is considered. The experiment was carried out onboard the Foton M-3 satellite. Several pellets moved in a cubic box fixed on the satellite’s mainframe and having two transparent adjacent walls. Their motion was photographed by a digital video camera. The camera was installed facing one of the transparent walls; a mirror was placed at an angle to another transparent wall. Such an optical system allowed us to have in a single frame two images of the pellets from differing viewpoints. The motion of the pellets was photographed on time intervals lasting 96 s. Pauses between these intervals were also equal to 96 s. A special processing of a separate image allowed us to determine coordinates of the pellet centers in the camera’s coordinate system. The sequence of frames belonging to a continuous interval of photography was processed in the following way. The time dependence of each coordinate of every pellet was approximated by a second degree polynomial using the least squares method. The coefficient of squared time is equal to a half of the corresponding microacceleration component. As has been shown by processing made, the described method of determination of quasi-static microaccelerations turned out to be sufficiently sensitive and accurate.

  19. Accuracy of diffusion tensor imaging for diagnosing cervical spondylotic myelopathy in patients showing spinal cord compression

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Bo; Chung Tae Sub; Kim, Sung Jun; Yoo, Yeon Hwa; Yoon, Choon Sik; Park, Jung Hyun [Gangnam Severance Hospital, Yonsei University College of Medicine, Seoul (Korea, Republic of); Lee, Young Han [Dept. of Radiology, Severance Hospital, Yonsei University College of Medicine, Seoul (Korea, Republic of); Jeong, Eun Kee [Dept. of Radiology, Utah Center for Advanced Imaging Research, University of Utah, Salt Lake (United States); Kim, In Seong [Siemens Healthcare, Seoul (Korea, Republic of)

    2015-12-15

    To assess the performance of diffusion tensor imaging (DTI) for the diagnosis of cervical spondylotic myelopathy (CSM) in patients with deformed spinal cord but otherwise unremarkable conventional magnetic resonance imaging (MRI) findings. A total of 33 patients who underwent MRI of the cervical spine including DTI using two-dimensional single-shot interleaved multi-section inner volume diffusion-weighted echo-planar imaging and whose spinal cords were deformed but showed no signal changes on conventional MRI were the subjects of this study. Mean diffusivity (MD), longitudinal diffusivity (LD), radial diffusivity (RD), and fractional anisotropy (FA) were measured at the most stenotic level. The calculated performance of MD, FA, MD∩FA (considered positive when both the MD and FA results were positive), LD∩FA (considered positive when both the LD and FA results were positive), and RD∩FA (considered positive when both the RD and FA results were positive) in diagnosing CSM were compared with each other based on the estimated cut-off values of MD, LD, RD, and FA from receiver operating characteristic curve analysis with the clinical diagnosis of CSM from medical records as the reference standard. The MD, LD, and RD cut-off values were 1.079 × 10'-{sup 3}, 1.719 × 10{sup -3}, and 0.749 × 10{sup -3} mm{sup 2}/sec, respectively, and that of FA was 0.475. Sensitivity, specificity, positive predictive value and negative predictive value were: 100 (4/4), 44.8 (13/29), 20 (4/20), and 100 (13/13) for MD; 100 (4/4), 27.6 (8/29), 16 (4/25), and 100 (8/8) for FA; 100 (4/4), 58.6 (17/29), 25 (4/16), and 100 (17/17) for MD∩FA; 100 (4/4), 68.9 (20/29), 30.8 (4/13), and 100 (20/20) for LD∩FA; and 75 (3/4), 68.9 (20/29), 25 (3/12), and 95.2 (20/21) for RD∩FA in percentage value. Diagnostic performance comparisons revealed significant differences only in specificity between FA and MD∩FA (p = 0.003), FA and LD∩FA (p < 0.001), FA and RD∩FA (p < 0.001), MD and LD

  20. High-Cadence, High-Contrast Imaging for Exoplanet Mapping: Observations of the HR 8799 Planets with VLT/SPHERE Satellite Spot-Corrected Relative Photometry

    CERN Document Server

    Apai, Daniel; Skemer, Andrew; Hanson, Jake R; Lagrange, Anne-Marie; Biller, Beth A; Bonnefoy, Mickael; Buenzli, Esther; Vigan, Arthur

    2016-01-01

    Time-resolved photometry is an important new probe of the physics of condensate clouds in extrasolar planets and brown dwarfs. Extreme adaptive optics systems can directly image planets, but precise brightness measurements are challenging. We present VLT/SPHERE high-contrast, time-resolved broad H-band near-infrared photometry for four exoplanets in the HR 8799 system, sampling changes from night to night over five nights with relatively short integrations. The photospheres of these four planets are often modeled by patchy clouds and may show large-amplitude rotational brightness modulations. Our observations provide high-quality images of the system. We present a detailed performance analysis of different data analysis approaches to accurately measure the relative brightnesses of the four exoplanets. We explore the information in satellite spots and demonstrate their use as a proxy for image quality. While the brightness variations of the satellite spots are strongly correlated, we also identify a second-ord...

  1. Determination of Destructed and Infracted Forest Areas with Multi-temporal High Resolution Satellite Images

    Science.gov (United States)

    Seker, D. Z.; Unal, A.; Kaya, S.; Alganci, U.

    2015-12-01

    Migration from rural areas to city centers and their surroundings is an important problem of not only our country but also the countries that under development stage. This uncontrolled and huge amount of migration brings out urbanization and socio - economic problems. The demand on settling the industrial areas and commercial activities nearby the city centers results with a negative change in natural land cover on cities. Negative impacts of human induced activities on natural resources and land cover has been continuously increasing for decades. The main human activities that resulted with destruction and infraction of forest areas can be defined as mining activities, agricultural activities, industrial / commercial activities and urbanization. Temporal monitoring of the changes in spatial distribution of forest areas is significantly important for effective management and planning progress. Changes can occur as spatially large destructions or small infractions. Therefore there is a need for reliable, fast and accurate data sources. At this point, satellite images proved to be a good data source for determination of the land use /cover changes with their capability of monitoring large areas with reasonable temporal resolutions. Spectral information derived from images provides discrimination of land use/cover types from each other. Developments in remote sensing technology in the last decade improved the spatial resolution of satellites and high resolution images were started to be used to detect even small changes in the land surface. As being the megacity of Turkey, Istanbul has been facing a huge migration for the last 20 years and effects of urbanization and other human based activities over forest areas are significant. Main focus of this study is to determine the destructions and infractions in forest areas of Istanbul, Turkey with 2.5m resolution SPOT 5 multi-temporal satellite imagery. Analysis was mainly constructed on threshold based classification of

  2. Attitude determination for three-axis stabilized geostationary meteorological satellite image navigation

    Science.gov (United States)

    Wu, Yaguang; Wang, Zhigang

    2005-11-01

    To achieve the high accuracy of attitude determination for three-axis stabilized geostationary meteorological satellite image navigation, a new approach combined gyro with star trackers is proposed, and a real-time algorithm for attitude estimation is designed. This algorithm begins with a prediction for angular rate model errors induced by gyro drifting error, and ends with the extended Kalman filtering (EKF) for attitude estimation of three-axis. A Matlab-based time domain simulation model is developed to evaluate the attitude determination performance. Simulation results demonstrate that the proposed algorithm has characteristics of high accuracy, rapid convergence and strong robustness.

  3. Online self-service processing system of ZY-3 satellite: a prospective study of image cloud services

    Science.gov (United States)

    Wang, Hongyan; Wang, Huabin; Shi, Shaoyu

    2015-12-01

    The strong demands for satellite images are increasing not only in professional fields, but also in the non-professionals. But the online map services with up-to-date satellite images can serve few demands. One challenge is how to provide online processing service, which need to handle real-time online data-intensive geospatial computation and visualization. Under the background of the development of cloud computing technology, the problem can be figured out partly. The other challenge is how to implement user-customized online processing without professional background and knowledge. An online self-service processing system of ZY-3 Satellite images is designed to implement an on-demand service mode in this paper. It will work with only some simple parameters being set up for the non-professionals without having to care about the specific processing steps. And the professionals can assemble the basic processing services to a service chain, which can work out a more complex processing and a better result. This intelligent self-service online system for satellite images processing, which is called the prototype of satellite image cloud service in this paper, is accelerated under the development of cloud computing technology and researches on data-intensive computing. To realize the goal, the service mode and framework of the online self-service processing system of ZY-3 Satellite images are figured out in this paper. The details of key technologies are also discussed, including user space virtualization management, algorithm-level parallel image processing, image service chain construction, etc. And the experimental system is built up as a prospective study of image cloud services.

  4. Satellite Image Pansharpening Using a Hybrid Approach for Object-Based Image Analysis

    Directory of Open Access Journals (Sweden)

    Nguyen Thanh Hoan

    2012-10-01

    Full Text Available Intensity-Hue-Saturation (IHS, Brovey Transform (BT, and Smoothing-Filter-Based-Intensity Modulation (SFIM algorithms were used to pansharpen GeoEye-1 imagery. The pansharpened images were then segmented in Berkeley Image Seg using a wide range of segmentation parameters, and the spatial and spectral accuracy of image segments was measured. We found that pansharpening algorithms that preserve more of the spatial information of the higher resolution panchromatic image band (i.e., IHS and BT led to more spatially-accurate segmentations, while pansharpening algorithms that minimize the distortion of spectral information of the lower resolution multispectral image bands (i.e., SFIM led to more spectrally-accurate image segments. Based on these findings, we developed a new IHS-SFIM combination approach, specifically for object-based image analysis (OBIA, which combined the better spatial information of IHS and the more accurate spectral information of SFIM to produce image segments with very high spatial and spectral accuracy.

  5. Using very high resolution satellite images to identify coastal zone dynamics at North Western Black Sea

    Science.gov (United States)

    Florin Zoran, Liviu; Ionescu Golovanov, Carmen; Zoran, Maria

    2010-05-01

    The availability of updated information about the extension and characteristics of land cover is a crucial issue in the perspective of a correct landscape planning and management of marine coastal zones. Satellite remote sensing data can provide accurate information about land coverage at different scales and the recent availability of very high resolution images definitely improved the precision of coastal zone spatio-temporal changes. The Romanian North Western coastal and shelf zones of the Black Sea and Danube delta are a mosaic of complex, interacting ecosystems, rich natural resources and socio-economic activity. Dramatic changes in the Black Sea's ecosystem and resources are due to natural and anthropogenic causes (increase in the nutrient and pollutant load of rivers input, industrial and municipal wastewater pollution along the coast, and dumping on the open sea). A scientific management system for protection, conservation and restoration must be based on reliable information on bio-geophysical and geomorphologic processes, coastal erosion, sedimentation dynamics, mapping of macrophyte fields, water quality, and climatic change effects. Use of satellite images is of great help for coastal zone monitoring and environmental impact assessment. Synergetic use of in situ measurements with multisensors satellite data could provide a complex assessment of spatio-temporal changes. In this study was developed a method for extracting coastal zone features information as well as landcover dynamics from IKONOS, very high resolution images for North-Western Black Sea marine coastal zone. The main objective was obtaining reliable data about the spatio-temporal coastal zone changes in two study areas located in Constanta urban area and Danube Delta area. We used an object-oriented approach based on preliminary segmentation and classification of the resulting object. First of all, segmentation parameters were tested and selected comparing segmented polygons with

  6. TIRCIS: Hyperspectral Thermal Infrared Imaging Using a Small-Satellite Compliant Fourier-Transform Imaging Spectrometer, for Natural Hazard Applications

    Science.gov (United States)

    Wright, R.; Lucey, P. G.; Crites, S.; Garbeil, H.; Wood, M.

    2015-12-01

    Many natural hazards, including wildfires, volcanic eruptions, and, from the perspective of climate-related hazards, urban heat islands, could be better quantified via the routine availability of hyperspectral thermal infrared remote sensing data from orbit. However, no sensors are currently in operation that provide such data at high-to-moderate spatial resolution (e.g. Landsat-class resolution). In this presentation we will describe a prototype instrument, developed using funding provided by NASA's Instrument Incubator Program, that can make these important measurements. Significantly, the instrument has been designed such that its size, mass, power, and cost are consistent with its integration into small satellite platforms, or deployment as part of small satellite constellations. The instrument, TIRCIS (Thermal Infra-Red Compact Imaging Spectrometer), uses a Fabry-Perot interferometer, an uncooled microbolometer array, and push-broom scanning to acquire hyperspectral image data cubes. Radiometric calibration is provided by blackbody targets while spectral calibration is achieved using monochromatic light sources. Neither the focal plane nor the optics need to be cooled, and the instrument has a mass of <10 kg and dimensions of 53 cm × 25 cm × 22 cm. Although the prototype has four moving parts, this can easily be reduced to one. The current optical design yields a 120 m ground sample size given an orbit of 500 km. Over the wavelength interval of 7.5 to 14 microns up to 90 spectral samples are possible, by varying the physical design of the interferometer. Our performance model indicates signal-to-noise ratios of the order of about 200 to 300:1. In this presentation we will provide an overview of the instrument design, fabrication, results from our initial laboratory characterization, and some of the application areas in which small-satellite-ready instruments such as TIRCIS could make a valuable contribution to the study of natural hazards.

  7. Assessment of Total Suspended Sediment Distribution under Varying Tidal Conditions in Deep Bay: Initial Results from HJ-1A/1B Satellite CCD Images

    Directory of Open Access Journals (Sweden)

    Liqiao Tian

    2014-10-01

    Full Text Available Using Deep Bay in China as an example, an effective method for the retrieval of total suspended sediment (TSS concentration using HJ-1A/1B satellite images is proposed. The factors driving the variation of the TSS spatial distribution are also discussed. Two field surveys, conducted on August 29 and October 26, 2012, showed that there was a strong linear relationship (R2 = 0.9623 between field-surveyed OBS (optical backscatter measurements (5-31NTU and laboratory-analyzed TSS concentrations (9.89–35.58 mg/L. The COST image-based atmospheric correction procedure and the pseudo-invariant features (PIF method were combined to remove the atmospheric effects from the total radiance measurements obtained with different CCDs onboard the HJ-1A/1B satellites. Then, a simple and practical retrieval model was established based on the relationship between the satellite-corrected reflectance band ratio of band 3 and band 2 (Rrs3/Rrs2 and in-situ TSS measurements. The R2 of the regression relationship was 0.807, and the mean relative error (MRE was 12.78%, as determined through in-situ data validation. Finally, the influences of tide cycles, wind factors (direction and speed and other factors on the variation of the TSS spatial pattern observed from HJ-1A/1B satellite images from September through November of 2008 are discussed. The results show that HJ-1A/1B satellite CCD images can be used to estimate TSS concentrations under different tides in the study area over synoptic scales without using simultaneous in-situ atmospheric parameters and spectrum data. These findings provide strong informational support for numerical simulation studies on the combined influence of tide cycles and other associated hydrologic elements in Deep Bay.

  8. Deep and shallow structures in the Arctic region imaged by satellite magnetic and gravity data

    Science.gov (United States)

    Gaina, Carmen; Panet, Isabelle; Shephard, Grace

    2016-07-01

    , volcanic crust, but, as in the case of other oceanic Large Igneous Provinces, only deep sea drilling will be able to reveal the true nature of the underlying crust at the core of the Arctic. The oldest continental crust, usually found in the cratonic areas and as Proterozoic accreted crust, generates the largest positive magnetic anomalies. This crust contains large and deep volcanic bodies in the North American shield, Greenland, the Baltic shield in Eurasia and the Siberian platform in NE Asia, and are imaged by the satellite data. Furthermore, satellite data is not only restricted to revealing crustal and lithospheric depths. Recent workflows have shown that subducted remnants of ocean basins, now located in the lower mantle, as well as large, antipodal features on the core-mantle boundary, can be imaged by satellite gravity. Seismic tomography provides evidence for an extinct Mesozoic Arctic ocean lying around 1400 km under present-day Greenland. However, the variable resolution of seismic tomography at high latitudes, as well as ambiguity in plate reconstructions, renders the existence of the slab open to interpretation. Critically, the current location of the slab also matches perturbations in long-wavelength gravity gradients, providing further support for a deep density anomaly and a slab origin. Gravity data therefore provides a complementary and independent link in linking surface events and deep mantle structure in frontier regions like the Arctic. By revealing the present-day structure, satellite-derived magnetics and gravity offer a critical component in our understanding of Arctic history, over timescales of millions of years and scales of thousands of kilometers.

  9. The digital mapping of satellite images under no ground control and the distribution of landform, blue ice and meteorites in the Grove Mountains, Antarctica

    Institute of Scientific and Technical Information of China (English)

    孙家抦; 霍东民; 周军其; 孙朝辉

    2001-01-01

    The colorful satellite image maps with the scale of 1∶100 000 were made by processing the parameters-on-satellite under the condition of no data of field surveying. The purpose is to ensure the smooth performance of the choice of expedition route, navigation and research task before the Chinese National Antarctic Research Expedition (CHINARE) first made researches on the Grove Mountains. Moreover, on the basis of the visual interpretation of the satellite image, we preliminarily analyze and discuss the relief and landform, blue ice and meteorite distribution characteristics in the Grove Mountains. Key words Grove Mountains, parameters-on-satellite, satellite image, digital mapping, blue ice, meteorites distribution.

  10. USE SATELLITE IMAGES AND IMPROVE THE ACCURACY OF HYPERSPECTRAL IMAGE WITH THE CLASSIFICATION

    Directory of Open Access Journals (Sweden)

    P. Javadi

    2015-12-01

    Full Text Available The best technique to extract information from remotely sensed image is classification. The problem of traditional classification methods is that each pixel is assigned to a single class by presuming all pixels within the image. Mixed pixel classification or spectral unmixing, is a process that extracts the proportions of the pure components of each mixed pixel. This approach is called spectral unmixing. Hyper spectral images have higher spectral resolution than multispectral images. In this paper, pixel-based classification methods such as the spectral angle mapper, maximum likelihood classification and subpixel classification method (linear spectral unmixing were implemented on the AVIRIS hyper spectral images. Then, pixel-based and subpixel based classification algorithms were compared. Also, the capabilities and advantages of spectral linear unmixing method were investigated. The spectral unmixing method that implemented here is an effective technique for classifying a hyperspectral image giving the classification accuracy about 89%. The results of classification when applying on the original images are not good because some of the hyperspectral image bands are subject to absorption and they contain only little signal. So it is necessary to prepare the data at the beginning of the process. The bands can be stored according to their variance. In bands with a high variance, we can distinguish the features from each other in a better mode in order to increase the accuracy of classification. Also, applying the MNF transformation on the hyperspectral images increase the individual classes accuracy of pixel based classification methods as well as unmixing method about 20 percent and 9 percent respectively.

  11. Analysis Of Usefulness Of Satellite Image Processing Methods For Investigations Of Cultural Heritage Resources

    Science.gov (United States)

    Osińska-Skotak, Katarzyna; Zapłata, Rafał

    2015-12-01

    The paper presents the analysis of usefulness of WorldView-2 satellite image processing, which enhance information concerning the cultural heritage objects. WorldView-2 images are characterised by the very high spatial resolution and high spectral resolution; that is why they create new possibilities for many applications, including investigations of the cultural heritage. The vicinities of Iłża have been selected as the test site for presented investigations. The presented results of works are the effect of research works, which were performed in the frames of the scientific project "Utilisation of laser scanning and remote sensing in protection, investigations and inventory of the cultural heritage. Development of non-invasive, digital methods of documenting and recognising the architectural and archaeological heritage", as the part of "The National Programme for the Development of Humanities" of the Minister of Science and Higher Education in the period of 2012-2015.

  12. Satellite Images-based Obstacle Recognition and Trajectory Generation for Agricultural Vehicles

    Directory of Open Access Journals (Sweden)

    Mehmet Bodur

    2015-12-01

    Full Text Available In this study, a method for the generation of tracking trajectory points, detection and positioning of obstacles in agricultural fields have been presented. Our principal contribution is to produce traceable GPS trajectories for agricultural vehicles to be utilized by path planning algorithms, rather than a new path planning algorithm. The proposed system works with minimal initialization requirements, specifically, a single geographical coordinate entry of an agricultural field. The automation of agricultural plantation requires many aspects to be addressed, many of which have been covered in previous studies. Depending on the type of crop, different agricultural vehicles may be used in the field. However, regardless of their application, they all follow a specified trajectory in the field. This study takes advantage of satellite images for the detection and positioning of obstacles, and the generation of GPS trajectories in the agricultural realm. A set of image processing techniques is applied in Matlab for detection and positioning.

  13. Quantitative analysis of geomorphic processes using satellite image data at different scales

    Science.gov (United States)

    Williams, R. S., Jr.

    1985-01-01

    When aerial and satellite photographs and images are used in the quantitative analysis of geomorphic processes, either through direct observation of active processes or by analysis of landforms resulting from inferred active or dormant processes, a number of limitations in the use of such data must be considered. Active geomorphic processes work at different scales and rates. Therefore, the capability of imaging an active or dormant process depends primarily on the scale of the process and the spatial-resolution characteristic of the imaging system. Scale is an important factor in recording continuous and discontinuous active geomorphic processes, because what is not recorded will not be considered or even suspected in the analysis of orbital images. If the geomorphic process of landform change caused by the process is less than 200 m in x to y dimension, then it will not be recorded. Although the scale factor is critical, in the recording of discontinuous active geomorphic processes, the repeat interval of orbital-image acquisition of a planetary surface also is a consideration in order to capture a recurring short-lived geomorphic process or to record changes caused by either a continuous or a discontinuous geomorphic process.

  14. Performance Evaluation of Machine Learning Algorithms for Urban Pattern Recognition from Multi-spectral Satellite Images

    Directory of Open Access Journals (Sweden)

    Marc Wieland

    2014-03-01

    Full Text Available In this study, a classification and performance evaluation framework for the recognition of urban patterns in medium (Landsat ETM, TM and MSS and very high resolution (WorldView-2, Quickbird, Ikonos multi-spectral satellite images is presented. The study aims at exploring the potential of machine learning algorithms in the context of an object-based image analysis and to thoroughly test the algorithm’s performance under varying conditions to optimize their usage for urban pattern recognition tasks. Four classification algorithms, Normal Bayes, K Nearest Neighbors, Random Trees and Support Vector Machines, which represent different concepts in machine learning (probabilistic, nearest neighbor, tree-based, function-based, have been selected and implemented on a free and open-source basis. Particular focus is given to assess the generalization ability of machine learning algorithms and the transferability of trained learning machines between different image types and image scenes. Moreover, the influence of the number and choice of training data, the influence of the size and composition of the feature vector and the effect of image segmentation on the classification accuracy is evaluated.

  15. Rotation-and-scale-invariant airplane detection in high-resolution satellite images based on deep-Hough-forests

    Science.gov (United States)

    Yu, Yongtao; Guan, Haiyan; Zai, Dawei; Ji, Zheng

    2016-02-01

    This paper proposes a rotation-and-scale-invariant method for detecting airplanes from high-resolution satellite images. To improve feature representation capability, a multi-layer feature generation model is created to produce high-order feature representations for local image patches through deep learning techniques. To effectively estimate airplane centroids, a Hough forest model is trained to learn mappings from high-order patch features to the probabilities of an airplane being present at specific locations. To handle airplanes with varying orientations, patch orientation is defined and integrated into the Hough forest to augment Hough voting. The scale invariance is achieved by using a set of scale factors embedded in the Hough forest. Quantitative evaluations on the images collected from Google Earth service show that the proposed method achieves a completeness, correctness, quality, and F1-measure of 0.968, 0.972, 0.942, and 0.970, respectively, in detecting airplanes with arbitrary orientations and sizes. Comparative studies also demonstrate that the proposed method outperforms the other three existing methods in accurately and completely detecting airplanes in high-resolution remotely sensed images.

  16. Use of geostationary meteorological satellite images in convective rain estimation for flash-flood forecasting

    Science.gov (United States)

    Wardah, T.; Abu Bakar, S. H.; Bardossy, A.; Maznorizan, M.

    2008-07-01

    SummaryFrequent flash-floods causing immense devastation in the Klang River Basin of Malaysia necessitate an improvement in the real-time forecasting systems being used. The use of meteorological satellite images in estimating rainfall has become an attractive option for improving the performance of flood forecasting-and-warning systems. In this study, a rainfall estimation algorithm using the infrared (IR) information from the Geostationary Meteorological Satellite-5 (GMS-5) is developed for potential input in a flood forecasting system. Data from the records of GMS-5 IR images have been retrieved for selected convective cells to be trained with the radar rain rate in a back-propagation neural network. The selected data as inputs to the neural network, are five parameters having a significant correlation with the radar rain rate: namely, the cloud-top brightness-temperature of the pixel of interest, the mean and the standard deviation of the temperatures of the surrounding five by five pixels, the rate of temperature change, and the sobel operator that indicates the temperature gradient. In addition, three numerical weather prediction (NWP) products, namely the precipitable water content, relative humidity, and vertical wind, are also included as inputs. The algorithm is applied for the areal rainfall estimation in the upper Klang River Basin and compared with another technique that uses power-law regression between the cloud-top brightness-temperature and radar rain rate. Results from both techniques are validated against previously recorded Thiessen areal-averaged rainfall values with coefficient correlation values of 0.77 and 0.91 for the power-law regression and the artificial neural network (ANN) technique, respectively. An extra lead time of around 2 h is gained when the satellite-based ANN rainfall estimation is coupled with a rainfall-runoff model to forecast a flash-flood event in the upper Klang River Basin.

  17. Measuring snow cover using satellite imagery during 1973 and 1974 melt season: North Santiam, Boise, and Upper Snake Basins, phase 1. [LANDSAT satellites, imaging techniques

    Science.gov (United States)

    Wiegman, E. J.; Evans, W. E.; Hadfield, R.

    1975-01-01

    Measurements are examined of snow coverage during the snow-melt season in 1973 and 1974 from LANDSAT imagery for the three Columbia River Subbasins. Satellite derived snow cover inventories for the three test basins were obtained as an alternative to inventories performed with the current operational practice of using small aircraft flights over selected snow fields. The accuracy and precision versus cost for several different interactive image analysis procedures was investigated using a display device, the Electronic Satellite Image Analysis Console. Single-band radiance thresholding was the principal technique employed in the snow detection, although this technique was supplemented by an editing procedure involving reference to hand-generated elevation contours. For each data and view measured, a binary thematic map or "mask" depicting the snow cover was generated by a combination of objective and subjective procedures. Photographs of data analysis equipment (displays) are shown.

  18. Fully automated extraction and analysis of surface Urban Heat Island patterns from moderate resolution satellite images

    Science.gov (United States)

    Keramitsoglou, I.; Kiranoudis, C. T.

    2012-04-01

    Comparison of thermal patterns across different cities is hampered by the lack of an appropriate methodology to extract the patterns and characterize them. What is more, increased attention by the urban climate community has been expressed to assess the magnitude and dynamics of the surface Urban Heat Island effect and to identify environmental impacts of large cities and "megacities". Motivated by this need, we propose an innovative object-based image analysis procedure to extract thermal patterns for the quantitative analysis of satellite-derived land surface temperature maps. The spatial and thermal attributes associated with these objects are then calculated and used for the analyses of the intensity, the position and the spatial extent of SUHIs. The output eventually builds up and populates a database with comparable and consistent attributes, allowing comparisons between cities as well as urban climate studies. The methodology is demonstrated over the Greater Athens Area, Greece, with more than 3000 LST images acquired by MODIS over a decade being analyzed. The approach can be potentially applied to current and future (e.g. Sentinel-3) level-2 satellite-derived land surface temperature maps of 1km spatial resolution acquired over continental and coastal cities.

  19. Earth Camp: Exploring Earth Change through the Use of Satellite Images and Scientific Practices

    Science.gov (United States)

    Baldridge, A.; Buxner, S.; Crown, D. A.; Colodner, D.; Orchard, A.; King, B.; Schwartz, K.; Prescott, A.; Prietto, J.; Titcomb, A.

    2014-07-01

    Earth Camp is a NASA-funded program that gives students and teachers opportunities to explore local, regional, and global earth change through a combination of hands-on investigations and the use of satellite images. Each summer, 20 middle school and 20 high school students participate in a two-week leadership program investigating contemporary issues (e.g., changes in river sheds, water quality, and land use management) through hands-on investigations, analyzing remote sensing data, and working with experts. Each year, 20 teachers participate in a year-long professional development program that includes monthly workshops, field investigations on Mt. Lemmon in Tucson, Arizona, and a week-long summer design workshop. Teachers conduct investigations of authentic questions using satellite images and create posters to present results of their study of earth change. In addition, teachers design lesson plans to expand their students' ability to investigate earth change with 21st Century tools. Lessons can be used as classroom exercises or for after-school club programs. Independent evaluation has been an integral part of program development and delivery for all three audiences, enabling the program staff and participants to reflect on and continually improve their practice and learning over the three-year period.

  20. A new strategic sampling for offshore wind assessment using radar satellite images

    Energy Technology Data Exchange (ETDEWEB)

    Beaucage, P.; Lafrance, G.; Bernier, M.; Lafrance, J. [Institut National de la Recherche Scientifique, Varennes, PQ (Canada); Choisnard, J. [Hydro-Quebec, Varennes, PQ (Canada)

    2007-07-01

    Synthetic Aperture Radar (SAR) satellite images have been used for offshore wind assessment. Several offshore wind farms are in operation or under construction in northern Europe. The European target for 2030 is 300 GW, of which half is intended for onshore and half for offshore development. Offshore projects in the east coast United States, the Gulf of Mexico and west coast of Canada are in the planning stage. Information obtained from SAR can be used to supplement current mapping methods of offshore wind energy resources. SAR is a useful tool to localize wind pattern over water surfaces. Other sources of offshore wind observations include meteorological stations such as buoys and masts; remote sensing instruments onboard satellites such as scatterometers (QuikSCAT, ASCAT) or passive microwave radiometers; and numerical weather prediction models. The synergy between scatterometers and SAR was discussed. The SAR system has been used for microscale resolution wind mapping in the Gaspe Peninsula. Strategic sampling zones were chosen in proximity to the QuikSCAT grid. It was concluded that 270 and 570 SAR images are needed to calculate average wind speed (U) and mean power output of a 3 MW wind turbine (P) over the Gaspe Peninsula region, respectively. It was concluded that microscale regional wind mapping can be produced at a lower cost with strategic sampling compared to random sampling. refs., tabs., figs.

  1. Exploiting Deep Matching and SAR Data for the Geo-Localization Accuracy Improvement of Optical Satellite Images

    Directory of Open Access Journals (Sweden)

    Nina Merkle

    2017-06-01

    Full Text Available Improving the geo-localization of optical satellite images is an important pre-processing step for many remote sensing tasks like monitoring by image time series or scene analysis after sudden events. These tasks require geo-referenced and precisely co-registered multi-sensor data. Images captured by the high resolution synthetic aperture radar (SAR satellite TerraSAR-X exhibit an absolute geo-location accuracy within a few decimeters. These images represent therefore a reliable source to improve the geo-location accuracy of optical images, which is in the order of tens of meters. In this paper, a deep learning-based approach for the geo-localization accuracy improvement of optical satellite images through SAR reference data is investigated. Image registration between SAR and optical images requires few, but accurate and reliable matching points. These are derived from a Siamese neural network. The network is trained using TerraSAR-X and PRISM image pairs covering greater urban areas spread over Europe, in order to learn the two-dimensional spatial shifts between optical and SAR image patches. Results confirm that accurate and reliable matching points can be generated with higher matching accuracy and precision with respect to state-of-the-art approaches.

  2. Effects of Per-Pixel Variability on Uncertainties in Bathymetric Retrievals from High-Resolution Satellite Images

    Directory of Open Access Journals (Sweden)

    Elizabeth J. Botha

    2016-05-01

    Full Text Available Increased sophistication of high spatial resolution multispectral satellite sensors provides enhanced bathymetric mapping capability. However, the enhancements are counter-acted by per-pixel variability in sunglint, atmospheric path length and directional effects. This case-study highlights retrieval errors from images acquired at non-optimal geometrical combinations. The effects of variations in the environmental noise on water surface reflectance and the accuracy of environmental variable retrievals were quantified. Two WorldView-2 satellite images were acquired, within one minute of each other, with Image 1 placed in a near-optimal sun-sensor geometric configuration and Image 2 placed close to the specular point of the Bidirectional Reflectance Distribution Function (BRDF. Image 2 had higher total environmental noise due to increased surface glint and higher atmospheric path-scattering. Generally, depths were under-estimated from Image 2, compared to Image 1. A partial improvement in retrieval error after glint correction of Image 2 resulted in an increase of the maximum depth to which accurate depth estimations were returned. This case-study indicates that critical analysis of individual images, accounting for the entire sun elevation and azimuth and satellite sensor pointing and geometry as well as anticipated wave height and direction, is required to ensure an image is fit for purpose for aquatic data analysis.

  3. 遗传算法在成像卫星计划编制中的应用%Application of GA in Imaging Satellite Planning

    Institute of Scientific and Technical Information of China (English)

    高朝晖; 岳群彬; 李伟

    2013-01-01

    Genetic Algorithms can optimize resource allocation in imaging satellite planning. Imaging satellite planning can be ex-plained as resources-related planning and scheduling. All usage constraints shall be considered in allocation and scheduling of satellite resource and ground receiving resource. And reasonable and feasible imaging plan of satellite and receiving plan of ground station shall be developed. Based on the principle and methods of Genetic Algorithms,the application of Genetic Algorithms in imaging satellite planning is detailed. Prototype system is implemented according to the design using right function,cross operator and variation opera-tor. ,simulation experiments show good effect.%采用遗传算法(Genetic Algorithms)实现成像卫星计划编制中的星地资源优化分配。成像卫星计划编制是与资源相关的规划调度问题,结合使用约束条件进行星上资源和地面站接收资源的分配与调度,制定合理可行的卫星摄影计划和地面站跟踪接收计划。在介绍遗传算法的基本原理和方法的基础上,详细阐述了遗传算法在成像卫星计划编制中的具体应用实践。基于设计实现的成像卫星计划编制原型系统,采用合适的适应度函数、交叉算子和变异算子,通过仿真实验获得了良好的优化效果。

  4. A learning tool for optical and microwave satellite image processing and analysis

    Science.gov (United States)

    Dashondhi, Gaurav K.; Mohanty, Jyotirmoy; Eeti, Laxmi N.; Bhattacharya, Avik; De, Shaunak; Buddhiraju, Krishna M.

    2016-04-01

    This paper presents a self-learning tool, which contains a number of virtual experiments for processing and analysis of Optical/Infrared and Synthetic Aperture Radar (SAR) images. The tool is named Virtual Satellite Image Processing and Analysis Lab (v-SIPLAB) Experiments that are included in Learning Tool are related to: Optical/Infrared - Image and Edge enhancement, smoothing, PCT, vegetation indices, Mathematical Morphology, Accuracy Assessment, Supervised/Unsupervised classification etc.; Basic SAR - Parameter extraction and range spectrum estimation, Range compression, Doppler centroid estimation, Azimuth reference function generation and compression, Multilooking, image enhancement, texture analysis, edge and detection. etc.; SAR Interferometry - BaseLine Calculation, Extraction of single look SAR images, Registration, Resampling, and Interferogram generation; SAR Polarimetry - Conversion of AirSAR or Radarsat data to S2/C3/T3 matrix, Speckle Filtering, Power/Intensity image generation, Decomposition of S2/C3/T3, Classification of S2/C3/T3 using Wishart Classifier [3]. A professional quality polarimetric SAR software can be found at [8], a part of whose functionality can be found in our system. The learning tool also contains other modules, besides executable software experiments, such as aim, theory, procedure, interpretation, quizzes, link to additional reading material and user feedback. Students can have understanding of Optical and SAR remotely sensed images through discussion of basic principles and supported by structured procedure for running and interpreting the experiments. Quizzes for self-assessment and a provision for online feedback are also being provided to make this Learning tool self-contained. One can download results after performing experiments.

  5. Precision Navigation of Cassini Images Using Rings, Icy Satellites, and Fuzzy Bodies

    Science.gov (United States)

    French, Robert S.; Showalter, Mark R.; Gordon, Mitchell K.

    2016-10-01

    Before images from the Cassini spacecraft can be analyzed, errors in the published pointing information (up to ~110 pixels for the Imaging Science Subsystem Narrow Angle Camera) must be corrected so that the line of sight vector for each pixel is known. This complicated and labor-intensive process involves matching the image contents with known features such as stars, rings, or moons. Metadata, such as lighting geometry or ring radius and longitude, must be computed for each pixel as well. Both steps require mastering the SPICE toolkit, a highly capable piece of software with a steep learning curve. Only after these steps are completed can the actual scientific investigation begin.We have embarked on a three-year project to perform these steps for all 400,000+ Cassini ISS images as well as images taken by the VIMS, UVIS, and CIRS instruments. The result will be a series of SPICE kernels that include accurate pointing information and a series of backplanes that include precomputed metadata for each pixel. All data will be made public through the PDS Ring-Moon Systems Node (http://www.pds-rings.seti.org). We expect this project to dramatically decrease the time required for scientists to analyze Cassini data.In a previous poster (French et al. 2014, DPS #46, 422.01) we discussed our progress navigating images using stars, simple ring models, and well-defined icy bodies. In this poster we will report on our current progress including the use of more sophisticated ring models, navigation of "fuzzy" bodies such as Titan and Saturn, and use of crater matching on high-resolution images of the icy satellites.

  6. A new method of MR total spine imaging for showing the brace effect in scoliosis

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, A.; Kandyba, J.; Koenig, R.; Jaeger, U.E.; Gieseke, J.; Schmitt, O. [Univ. of Bonn (Germany)

    2001-07-01

    Bracing is a method of early, nonsurgical treatment for scoliosis, but a hypokyphotic effect on the thoracic spine is reported. We developed a magnetic resonance tomography (MR) procedure presenting an image of the whole spine in the coronal and sagittal planes (MR total spine imaging), and studied the brace effect, using this technique. We examined 26 female patients with idiopathic scoliosis treated with a Cheneau brace (mean age, 13.2 years; mean duration of brace treatment at the time of investigation, 1.5 years). The MR examinations were performed with the patient in the supine position with and without the brace in direct sequence. As measured on the coronal MR images, the thoracic curve was corrected, on average, from 29 deg to 22 deg (mean correction, 24%). There was a slight reduction in the sagittal Cobb angle measured between T4 and T12 (mean sagittal Cobb angle without brace, 14 deg ; with brace, 12 deg), which was still a significant change. MR total spine imaging could be a useful tool for studying the brace effect in scoliosis in two planes. Using this technique, we found reduced sagittal Cobb angles for the thoracic kyphosis with brace. Because there is no radiation exposure, the MR procedure has a potential use in the monitoring of brace treatment. (author)

  7. Study of medication-free children with Tourette syndrome do not show imaging abnormalities

    DEFF Research Database (Denmark)

    Jeppesen, Signe Søndergaard; Debes, Nanette Mol; Simonsen, Helle Juhl

    2014-01-01

    BACKGROUND: Imaging studies of patients with Tourette's syndrome (TS) across different cohorts have shown alterations in gray and white matter in areas associated with the cortico-striato-thalamic-cortical (CSTC) pathways; however, no consistent findings have subsequently established a clear indi...

  8. On the Use of Machine Vision Techniques to Detect Human Settlements in Satellite Images

    Energy Technology Data Exchange (ETDEWEB)

    Kamath, C; Sengupta, S K; Poland, D; Futterman, J A H

    2003-01-10

    The automated production of maps of human settlement from recent satellite images is essential to studies of urbanization, population movement, and the like. The spectral and spatial resolution of such imagery is often high enough to successfully apply computer vision techniques. However, vast amounts of data have to be processed quickly. In this paper, we propose an approach that processes the data in several different stages. At each stage, using features appropriate to that stage, we identify the portion of the data likely to contain information relevant to the identification of human settlements. This data is used as input to the next stage of processing. Since the size of the data has reduced, we can now use more complex features in this next stage. These features can be more representative of human settlements, and also more time consuming to extract from the image data. Such a hierarchical approach enables us to process large amounts of data in a reasonable time, while maintaining the accuracy of human settlement identification. We illustrate our multi-stage approach using IKONOS 4-band and panchromatic images, and compare it with the straight-forward processing of the entire image.

  9. Learning Oriented Region-based Convolutional Neural Networks for Building Detection in Satellite Remote Sensing Images

    Science.gov (United States)

    Chen, C.; Gong, W.; Hu, Y.; Chen, Y.; Ding, Y.

    2017-05-01

    The automated building detection in aerial images is a fundamental problem encountered in aerial and satellite images analysis. Recently, thanks to the advances in feature descriptions, Region-based CNN model (R-CNN) for object detection is receiving an increasing attention. Despite the excellent performance in object detection, it is problematic to directly leverage the features of R-CNN model for building detection in single aerial image. As we know, the single aerial image is in vertical view and the buildings possess significant directional feature. However, in R-CNN model, direction of the building is ignored and the detection results are represented by horizontal rectangles. For this reason, the detection results with horizontal rectangle cannot describe the building precisely. To address this problem, in this paper, we proposed a novel model with a key feature related to orientation, namely, Oriented R-CNN (OR-CNN). Our contributions are mainly in the following two aspects: 1) Introducing a new oriented layer network for detecting the rotation angle of building on the basis of the successful VGG-net R-CNN model; 2) the oriented rectangle is proposed to leverage the powerful R-CNN for remote-sensing building detection. In experiments, we establish a complete and bran-new data set for training our oriented R-CNN model and comprehensively evaluate the proposed method on a publicly available building detection data set. We demonstrate State-of-the-art results compared with the previous baseline methods.

  10. Improving a DWT-based compression algorithm for high image-quality requirement of satellite images

    Science.gov (United States)

    Thiebaut, Carole; Latry, Christophe; Camarero, Roberto; Cazanave, Grégory

    2011-10-01

    Past and current optical Earth observation systems designed by CNES are using a fixed-rate data compression processing performed at a high-rate in a pushbroom mode (also called scan-based mode). This process generates fixed-length data to the mass memory and data downlink is performed at a fixed rate too. Because of on-board memory limitations and high data rate processing needs, the rate allocation procedure is performed over a small image area called a "segment". For both PLEIADES compression algorithm and CCSDS Image Data Compression recommendation, this rate allocation is realised by truncating to the desired rate a hierarchical bitstream of coded and quantized wavelet coefficients for each segment. Because the quantisation induced by truncation of the bit planes description is the same for the whole segment, some parts of the segment have a poor image quality. These artefacts generally occur in low energy areas within a segment of higher level of energy. In order to locally correct these areas, CNES has studied "exceptional processing" targeted for DWT-based compression algorithms. According to a criteria computed for each part of the segment (called block), the wavelet coefficients can be amplified before bit-plane encoding. As usual Region of Interest handling, these multiplied coefficients will be processed earlier by the encoder than in the nominal case (without exceptional processing). The image quality improvement brought by the exceptional processing has been confirmed by visual image analysis and fidelity criteria. The complexity of the proposed improvement for on-board application has also been analysed.

  11. Assessment of temporal variations of water quality in inland water bodies using atmospheric corrected satellite remotely sensed image data.

    Science.gov (United States)

    Hadjimitsis, Diofantos G; Clayton, Chris

    2009-12-01

    Although there have been many studies conducted on the use of satellite remote sensing for water quality monitoring and assessment in inland water bodies, relatively few studies have considered the problem of atmospheric intervention of the satellite signal. The problem is especially significant when using time series multi-spectral satellite data to monitor water quality surveillance in inland waters such as reservoirs, lakes, and dams because atmospheric effects constitute the majority of the at-satellite reflectance over water. For the assessment of temporal variations of water quality, the use of multi-date satellite images is required so atmospheric corrected image data must be determined. The aim of this study is to provide a simple way of monitoring and assessing temporal variations of water quality in a set of inland water bodies using an earth observation- based approach. The proposed methodology is based on the development of an image-based algorithm which consists of a selection of sampling area on the image (outlet), application of masking and convolution image processing filter, and application of the darkest pixel atmospheric correction. The proposed method has been applied in two different geographical areas, in UK and Cyprus. Mainly, the method has been applied to a series of eight archived Landsat-5 TM images acquired from March 1985 up to November 1985 of the Lower Thames Valley area in the West London (UK) consisting of large water treatment reservoirs. Finally, the method is further tested to the Kourris Dam in Cyprus. It has been found that atmospheric correction is essential in water quality assessment studies using satellite remotely sensed imagery since it improves significantly the water reflectance enabling effective water quality assessment to be made.

  12. An Object-Based Image Analysis Approach for Detecting Penguin Guano in very High Spatial Resolution Satellite Images

    Directory of Open Access Journals (Sweden)

    Chandi Witharana

    2016-04-01

    Full Text Available The logistical challenges of Antarctic field work and the increasing availability of very high resolution commercial imagery have driven an interest in more efficient search and classification of remotely sensed imagery. This exploratory study employed geographic object-based analysis (GEOBIA methods to classify guano stains, indicative of chinstrap and Adélie penguin breeding areas, from very high spatial resolution (VHSR satellite imagery and closely examined the transferability of knowledge-based GEOBIA rules across different study sites focusing on the same semantic class. We systematically gauged the segmentation quality, classification accuracy, and the reproducibility of fuzzy rules. A master ruleset was developed based on one study site and it was re-tasked “without adaptation” and “with adaptation” on candidate image scenes comprising guano stains. Our results suggest that object-based methods incorporating the spectral, textural, spatial, and contextual characteristics of guano are capable of successfully detecting guano stains. Reapplication of the master ruleset on candidate scenes without modifications produced inferior classification results, while adapted rules produced comparable or superior results compared to the reference image. This work provides a road map to an operational “image-to-assessment pipeline” that will enable Antarctic wildlife researchers to seamlessly integrate VHSR imagery into on-demand penguin population census.

  13. Winter mass balance of Drangajökull ice cap (NW Iceland) derived from satellite sub-meter stereo images

    OpenAIRE

    J. M. C. Belart; E. Berthier; E. Magnússon; Anderson, L.S.; F. Pálsson; Thorsteinsson, T; Howat, I. M.; Aðalgeirsdóttir, G.; Jóhannesson, T.; A. H. Jarosch

    2017-01-01

    Sub-meter resolution, stereoscopic satellite images allow for the generation of accurate and high-resolution digital elevation models (DEMs) over glaciers and ice caps. Here, repeated stereo images of Drangajökull ice cap (NW Iceland) from Pléiades and WorldView2 (WV2) are combined with in situ estimates of snow density and densification of firn and fresh snow to provide the first estimates of the glacier-wide geodetic winter mass balance obtained from satellite imagery. Sta...

  14. Application of image cross-correlation to the measurement of glacier velocity using satellite image data

    Science.gov (United States)

    Scambos, Theodore A.; Dutkiewicz, Melanie J.; Wison, Jeremy C.; Bindschadler, Robert A.

    1992-01-01

    A high-resolution map of the velocity field of the central portion of Ice Stream E in West Antarctica, generated by the displacement-measuring technique, is presented. The use of cross-correlation software is found to be a significant improvement over previous manually based photogrammetric methods for velocity measurement, and is far more cost-effective than in situ methods in remote polar areas. A hue-intensity-saturation image of Ice Stream E and its velocity field is shown.

  15. Reprocessing the Historical Satellite Passive Microwave Record at Enhanced Spatial Resolutions using Image Reconstruction

    Science.gov (United States)

    Hardman, M.; Brodzik, M. J.; Long, D. G.; Paget, A. C.; Armstrong, R. L.

    2015-12-01

    Beginning in 1978, the satellite passive microwave data record has been a mainstay of remote sensing of the cryosphere, providing twice-daily, near-global spatial coverage for monitoring changes in hydrologic and cryospheric parameters that include precipitation, soil moisture, surface water, vegetation, snow water equivalent, sea ice concentration and sea ice motion. Currently available global gridded passive microwave data sets serve a diverse community of hundreds of data users, but do not meet many requirements of modern Earth System Data Records (ESDRs) or Climate Data Records (CDRs), most notably in the areas of intersensor calibration, quality-control, provenance and consistent processing methods. The original gridding techniques were relatively primitive and were produced on 25 km grids using the original EASE-Grid definition that is not easily accommodated in modern software packages. Further, since the first Level 3 data sets were produced, the Level 2 passive microwave data on which they were based have been reprocessed as Fundamental CDRs (FCDRs) with improved calibration and documentation. We are funded by NASA MEaSUREs to reprocess the historical gridded data sets as EASE-Grid 2.0 ESDRs, using the most mature available Level 2 satellite passive microwave (SMMR, SSM/I-SSMIS, AMSR-E) records from 1978 to the present. We have produced prototype data from SSM/I and AMSR-E for the year 2003, for review and feedback from our Early Adopter user community. The prototype data set includes conventional, low-resolution ("drop-in-the-bucket" 25 km) grids and enhanced-resolution grids derived from the two candidate image reconstruction techniques we are evaluating: 1) Backus-Gilbert (BG) interpolation and 2) a radiometer version of Scatterometer Image Reconstruction (SIR). We summarize our temporal subsetting technique, algorithm tuning parameters and computational costs, and include sample SSM/I images at enhanced resolutions of up to 3 km. We are actively

  16. Global thermochemical imaging of the lithosphere using satellite and terrestrial observations

    Science.gov (United States)

    Fullea, Javier; Lebedev, Sergei; Martinec, Zdenek; Celli, Nicolas

    2017-04-01

    Conventional methods of seismic tomography, topography, gravity and electromagnetic data analysis and geodynamic modelling constrain distributions of seismic velocity, density, electrical conductivity, and viscosity at depth, all depending on temperature and composition of the rocks within the Earth. However, modelling and interpretation of multiple data sets provide a multifaceted image of the true thermochemical structure of the Earth that needs to be appropriately and consistently integrated. A simple combination of gravity, electromagnetic, geodynamics, petrological and seismic models alone is insufficient due to the non-uniqueness and different sensitivities of these models, and the internal consistency relationships that must connect all the intermediate parameters describing the Earth involved. Thermodynamic and petrological links between seismic velocities, density, electrical conductivity, viscosity, melt, water, temperature, pressure and composition within the Earth can now be modelled accurately using new methods of computational petrology and data from laboratory experiments. The growth of very large terrestrial and satellite (e.g., Swarm and GOCE ESA missions) geophysical data sets over the last few years, together with the advancement of petrological and geophysical modelling techniques, now present an opportunity for global, thermochemical and deformation 3D imaging of the lithosphere and underlying upper mantle with unprecedented resolution. This project combines state-of-the-art seismic waveform tomography (using both surface and body waves), newly available global gravity satellite data (geoid and gravity anomalies and new gradiometric measurements from ESA's GOCE mission) and surface heat flow and elevation within a self-consistent thermodynamic framework. The aim is to develop a method for detailed and robust global thermochemical image of the lithosphere and underlying upper mantle. In a preliminary study, we convert a state-of-the-art global

  17. Feasibility of anomaly occurrence in aerosols time series obtained from MODIS satellite images during hazardous earthquakes

    Science.gov (United States)

    Akhoondzadeh, Mehdi; Jahani Chehrebargh, Fatemeh

    2016-09-01

    Earthquake is one of the most devastating natural disasters that its prediction has not materialized comprehensive. Remote sensing data can be used to access information which is closely related to an earthquake. The unusual variations of lithosphere, atmosphere and ionosphere parameters before the main earthquakes are considered as earthquake precursors. To date the different precursors have been proposed. This paper examines one of the parameters which can be derived from satellite imagery. The mentioned parameter is Aerosol Optical Depth (AOD) that this article reviews its relationship with earthquake. Aerosol parameter can be achieved through various methods such as AERONET ground stations or using satellite images via algorithms such as the DDV (Dark Dense Vegetation), Deep Blue Algorithm and SYNTAM (SYNergy of Terra and Aqua Modis). In this paper, by analyzing AOD's time series (derived from MODIS sensor on the TERRA platform) for 16 major earthquakes, seismic anomalies were observed before and after earthquakes. Before large earthquakes, rate of AOD increases due to the pre-seismic changes before the strong earthquake, which produces gaseous molecules and therefore AOD increases. Also because of aftershocks after the earthquake there is a significant change in AOD due to gaseous molecules and dust. These behaviors suggest that there is a close relationship between earthquakes and the unusual AOD variations. Therefore the unusual AOD variations around the time of earthquakes can be introduced as an earthquake precursor.

  18. [Design and study of a high resolution vacuum ultraviolet imaging spectrometer carried by satellite].

    Science.gov (United States)

    Yu, Lei; Lin, Guan-yu; Qu, Yi; Wang, Shu-rong; Wang, Long-qi

    2011-12-01

    A high resolution vacuum ultraviolet imaging spectrometer prototype carried by satellite applied to the atmosphere detection of particles distribution in 115-300 nm was developed for remote sensing. First, based on the analysis of advanced loads, the optical system including an off-axis parabolic mirror as the telescope and Czerny-Turner structure as the imaging spectrometer was chosen Secondly, the 2-D photon counting detector with MCP was adopted for the characteristic that the radiation is weak in vacuum ultraviolet waveband. Then the geometric method and 1st order differential calculation were introduced to improve the disadvantages that aberrations in the traditional structure can not be corrected homogeneously to achieve perfect broadband imaging based on the aberration theory. At last, an advanced example was designed. The simulation and calculation of results demonstrate that the modulation transfer function (MTF) of total field of view is more than 0.6 in the broadband, and the spectral resolution is 1.23 nm. The structure is convenient and predominant. It proves that the design is feasible.

  19. Real time deforestation detection using ann and satellite images the Amazon rainforest study case

    CERN Document Server

    Nunes Kehl, Thiago; Roberto Veronez, Maurício; Cesar Cazella, Silvio

    2015-01-01

    The foremost aim of the present study was the development of a tool to detect daily deforestation in the Amazon rainforest, using satellite images from the MODIS/TERRA sensor and Artificial Neural Networks. The developed tool provides parameterization of the configuration for the neural network training to enable us to select the best neural architecture to address the problem. The tool makes use of confusion matrices to determine the degree of success of the network. A spectrum-temporal analysis of the study area was done on 57 images from May 20 to July 15, 2003 using the trained neural network. The analysis enabled verification of quality of the implemented neural network classification and also aided in understanding the dynamics of deforestation in the Amazon rainforest, thereby highlighting the vast potential of neural networks for image classification. However, the complex task of detection of predatory actions at the beginning, i.e., generation of consistent alarms, instead of false alarms has not bee...

  20. Feasibility study on UV/visible imaging spectrograph (Geo-OPUS) for GOAL satellite proposal

    Science.gov (United States)

    Suzuki, M.; Kita, K.; Toshimi, T.; Okumura, S.; Shiomi, K.; Imamura, T.; Nakamura, M.

    Geo-OPUS geostationary ozone and air pollution monitoring UV visible spectrometer is a core instrument of GOAL geostationary observation of atmospheric chemistry and lightning satellite proposal Geo-OPUS is an imaging spectrograph to scan earth disk 20km x 20 km nadir pixel 512 north-south pixels IFOV and whole disk FOV within 1 hour observation cycle which observes 270-450 nm with 0 3 nm spectral sampling Onboard spectral calibration 0 01 nm accuracy is carried out using Hg lamp and solar lines Radio Diffuser plates are used for radiometric calibration Primary observation targets are total column of NO2 SO2 O3 also stratospheric profile HCHO and aerosols It also measures stratospheric species OClO BrO etc High SNR and spectral calibration stability are required to derive species such as tropospheric O3 column in 10-20 accuracy required by IGOS-P IGACO

  1. Origins and features of oil slicks in the Bohai Sea detected from satellite SAR images.

    Science.gov (United States)

    Ding, Yi; Cao, Conghua; Huang, Juan; Song, Yan; Liu, Guiyan; Wu, Lingjuan; Wan, Zhenwen

    2016-05-15

    Oil slicks were detected using satellite Synthetic Aperture Radar (SAR) images in 2011. We investigated potential origins and regional and seasonal features of oil slick in the Bohai Sea. Distance between oil slicks and potential origins (ships, seaports, and oil exploitation platforms) and the angle at which oil slicks move relative to potential driving forces were evaluated. Most oil slicks were detected along main ship routes rather than around seaports and oil exploitation platforms. Few oil slicks were detected within 20km of seaports. Directions of oil slicks movement were much more strongly correlated with directions of ship routes than with directions of winds and currents. These findings support the premise that oil slicks in the Bohai Sea most likely originate from illegal disposal of oil-polluted wastes from ships. Seasonal variation of oil slicks followed an annual cycle, with a peak in August and a trough in December.

  2. Monitoring the Water Quality of Lake Koronia Using Long Time-Series of Multispectral Satellite Images

    Science.gov (United States)

    Perivolioti, Triantafyllia-Maria; Mouratidis, Antonios; Doxani, Georgia; Bobori, Dimitra

    2016-08-01

    In this study, a comprehensive 30-year (1984-2016) water quality parameter database for lake Koronia - one of the most important Ramsar wetlands of Greece - was compiled from Landsat imagery. The reliability of the data was evaluated by comparing water Quality Element (QE) values computed from Landsat data against in-situ data. Water quality algorithms developed from previous studies, specifically for the determination of Water Temperature, pH, Transparency/Secchi Disk Depth (SDD), Chlorophyll a and Conductivity, were applied to Landsat images. In addition, Water Depth, as well as the distribution of floating vegetation and cyanobacterial blooms were mapped. The performed comprehensive analysis posed certain questions, regarding the applicability of single empirical models across multi- temporal, multi-sensor datasets, towards the accurate prediction of key water quality indicators for shallow inland systems. This assessment demonstrates that satellite imagery can provide an accurate method for obtaining comprehensive spatial and temporal coverage of key water quality characteristics.

  3. A configurable distributed high-performance computing framework for satellite's TDI-CCD imaging simulation

    Science.gov (United States)

    Xue, Bo; Mao, Bingjing; Chen, Xiaomei; Ni, Guoqiang

    2010-11-01

    This paper renders a configurable distributed high performance computing(HPC) framework for TDI-CCD imaging simulation. It uses strategy pattern to adapt multi-algorithms. Thus, this framework help to decrease the simulation time with low expense. Imaging simulation for TDI-CCD mounted on satellite contains four processes: 1) atmosphere leads degradation, 2) optical system leads degradation, 3) electronic system of TDI-CCD leads degradation and re-sampling process, 4) data integration. Process 1) to 3) utilize diversity data-intensity algorithms such as FFT, convolution and LaGrange Interpol etc., which requires powerful CPU. Even uses Intel Xeon X5550 processor, regular series process method takes more than 30 hours for a simulation whose result image size is 1500 * 1462. With literature study, there isn't any mature distributing HPC framework in this field. Here we developed a distribute computing framework for TDI-CCD imaging simulation, which is based on WCF[1], uses Client/Server (C/S) layer and invokes the free CPU resources in LAN. The server pushes the process 1) to 3) tasks to those free computing capacity. Ultimately we rendered the HPC in low cost. In the computing experiment with 4 symmetric nodes and 1 server , this framework reduced about 74% simulation time. Adding more asymmetric nodes to the computing network, the time decreased namely. In conclusion, this framework could provide unlimited computation capacity in condition that the network and task management server are affordable. And this is the brand new HPC solution for TDI-CCD imaging simulation and similar applications.

  4. a Novel Ship Detection Method for Large-Scale Optical Satellite Images Based on Visual Lbp Feature and Visual Attention Model

    Science.gov (United States)

    Haigang, Sui; Zhina, Song

    2016-06-01

    Reliably ship detection in optical satellite images has a wide application in both military and civil fields. However, this problem is very difficult in complex backgrounds, such as waves, clouds, and small islands. Aiming at these issues, this paper explores an automatic and robust model for ship detection in large-scale optical satellite images, which relies on detecting statistical signatures of ship targets, in terms of biologically-inspired visual features. This model first selects salient candidate regions across large-scale images by using a mechanism based on biologically-inspired visual features, combined with visual attention model with local binary pattern (CVLBP). Different from traditional studies, the proposed algorithm is high-speed and helpful to focus on the suspected ship areas avoiding the separation step of land and sea. Largearea images are cut into small image chips and analyzed in two complementary ways: Sparse saliency using visual attention model and detail signatures using LBP features, thus accordant with sparseness of ship distribution on images. Then these features are employed to classify each chip as containing ship targets or not, using a support vector machine (SVM). After getting the suspicious areas, there are still some false alarms such as microwaves and small ribbon clouds, thus simple shape and texture analysis are adopted to distinguish between ships and nonships in suspicious areas. Experimental results show the proposed method is insensitive to waves, clouds, illumination and ship size.

  5. A NOVEL SHIP DETECTION METHOD FOR LARGE-SCALE OPTICAL SATELLITE IMAGES BASED ON VISUAL LBP FEATURE AND VISUAL ATTENTION MODEL

    Directory of Open Access Journals (Sweden)

    S. Haigang

    2016-06-01

    Full Text Available Reliably ship detection in optical satellite images has a wide application in both military and civil fields. However, this problem is very difficult in complex backgrounds, such as waves, clouds, and small islands. Aiming at these issues, this paper explores an automatic and robust model for ship detection in large-scale optical satellite images, which relies on detecting statistical signatures of ship targets, in terms of biologically-inspired visual features. This model first selects salient candidate regions across large-scale images by using a mechanism based on biologically-inspired visual features, combined with visual attention model with local binary pattern (CVLBP. Different from traditional studies, the proposed algorithm is high-speed and helpful to focus on the suspected ship areas avoiding the separation step of land and sea. Largearea images are cut into small image chips and analyzed in two complementary ways: Sparse saliency using visual attention model and detail signatures using LBP features, thus accordant with sparseness of ship distribution on images. Then these features are employed to classify each chip as containing ship targets or not, using a support vector machine (SVM. After getting the suspicious areas, there are still some false alarms such as microwaves and small ribbon clouds, thus simple shape and texture analysis are adopted to distinguish between ships and nonships in suspicious areas. Experimental results show the proposed method is insensitive to waves, clouds, illumination and ship size.

  6. Upstream drivers of poleward moving auroral forms by satellite-imager coordinated observations

    Science.gov (United States)

    Wang, B.; Nishimura, T.; Lyons, L. R.; Angelopoulos, V.; Frey, H. U.; Mende, S. B.

    2015-12-01

    Poleward moving auroral forms (PMAFs) are observed near the dayside poleward auroral oval boundary. PMAFs are thought to be an ionospheric signature of dayside reconnection and flux transfer events. PMAFs tend to occur when the IMF is southward. Although a limited number of PMAFs has been found in association with IMF southward turning, events without appreciable changes in IMF have also been reported. While those PMAFs could be triggered spontaneously, many of the past studies used solar wind measurements far away from the bow shock nose and may have used inaccurate time shift or missed small-scale structures in the solar wind. To examine how often PMAFs are triggered by upstream structures using solar wind measurements close to the bow shock nose, we use the AGO all sky imager in Antarctic and THEMIS B and C satellites in 2008, 2009 and 2011. We identified 24 conjunction events, where at least one of the THEMIS satellites is in the solar wind and the AGO imager is located within 3 MLT from the THEMIS MLT. We found that, in 14 out of 24 conjunction events, PMAFs occur soon after IMF southward turning, indicating that IMF southward turning could be the major triggering of PMAFs. Interestingly, among these 14 cases, there are 7 cases with different IMF structures between THEMIS B/C and OMNI, which obtained IMF information from WIND and ACE. And the larger correlation coefficients between PMAFs and IMFs observed by THMEIS B/C than OMNI present the advantages of THEMIS B/C. Among the 10 cases without correlating with IMF structures, PMAFs in two events are shown to have good correlation with reflected ions in the foreshock. Based on all the conjunction events we identified, IMF southward turning is the major trigger of PMAFs and reflected ions have minor effects. The rest of the cases could be spontaneous PMAFs, although foreshock activities, even if exists, may be missed due to the IMF orientation.

  7. A compact thermal infrared imaging radiometer with high spatial resolution and wide swath for a small satellite using a large format uncooled infrared focal plane array

    Science.gov (United States)

    Tatsumi, Kenji; Sakuma, Fumihiro; Kikuchi, Masakuni; Tanii, Jun; Kawanishi, Toneo; Ueno, Shinichi; Kuga, Hideki

    2014-10-01

    In this paper, we present a feasibility study for the potential of a high spatial resolution and wide swath thermal infrared (TIR) imaging radiometer for a small satellite using a large format uncooled infrared focal plane array (IR-FPA). The preliminary TIR imaging radiometer designs were performed. One is a panchromatic (mono-band) imaging radiometer (8-12μm) with a large format 2000 x 1000 pixels uncooled IR-FPA with a pixel pitch of 15 μm. The other is a multiband imaging radiometer (8.8μm, 10.8μm, 11.4μm). This radiometer is employed separate optics and detectors for each wave band. It is based on the use of a 640 x 480 pixels uncooled IR-FPA with a pixel pitch of 25 μm. The thermal time constant of an uncooled IR-FPA is approximately 10-16ms, and introduces a constraint to the satellite operation to achieve better signal-to-noise ratio, MTF and linearity performances. The study addressed both on-ground time-delayintegration binning and staring imaging solutions, although a staring imaging was preferred after trade-off. The staring imaging requires that the line of sight of the TIR imaging radiometer gazes at a target area during the acquisition time of the image, which can be obtained by rotating the satellite or a steering mirror around the pitch axis. The single band radiometer has been designed to yield a 30m ground sample distance over a 30km swath width from a satellite altitude of 500km. The radiometric performance, enhanced with staring imaging, is expected to yield a NETD less than 0.5K for a 300K ground scene. The multi-band radiometer has three spectral bands with spatial resolution of 50m and swath width of 24km. The radiometric performance is expected to yield a NETD less than 0.85K. We also showed some preliminary simulation results on volcano, desert/urban scenes, and wildfire.

  8. Crater Relaxation and Stereo Imaging of the Icy Satellites of Jupiter and Saturn

    Science.gov (United States)

    Phillips, C. B.; Beyer, R. A.; Nimmo, F.; Roberts, J. H.; Robuchon, G.

    2010-12-01

    Crater relaxation has been used as a probe of subsurface temperature structure for over thirty years, both on terrestrial bodies and icy satellites. We are developing and testing two independent methods for processing stereo pairs to produce digital elevation models, to address how crater relaxation depends on crater diameter, geographic location, and stratigraphic position on the icy satellites of Jupiter and Saturn. Our topographic profiles will then serve as input into two numerical models, one viscous and one viscoelastic, to allow us to probe the subsurface thermal profiles and relaxation histories of these satellites. We are constructing stereo topography from Galileo and Cassini image pairs using the NASA Ames Stereo Pipeline (Moratto et al. 2010), an automated stereogrammetry tool designed for processing planetary imagery captured from orbiting and landed robotic explorers on other planets. We will also be using the commercial program SOCET SET from BAE Systems (Miller and Walker 1993; 1995). Qualitatively, it is clear that there are large spatial variations in the degree of crater relaxation among Jupiter’s and Saturn’s satellites. However, our use of stereo topography will allow quantitative measures of crater relaxation (e.g. depth:diameter ratio or equivalent) to be derived. Such measures are essential to derive quantitative estimates of the heat fluxes responsible for this relaxation. Estimating how surface heat flux has varied with time provides critical constraints on satellite thermal (and orbital) evolution. Craters undergo viscous relaxation over time at a rate that depends on the temperature gradient and crater scale. We are investigating how the near-surface satellite heat flux varied in time and space, based on our crater relaxation observations. Once we have crater profiles from our DEMs, we use them as input to two theoretical approaches: a relatively simple (viscous) numerical model in which time-varying heat fluxes can be included, and

  9. Application of Multifractal Analysis to Segmentation of Water Bodies in Optical and Synthetic Aperture Radar Satellite Images

    CERN Document Server

    Martin, Victor Manuel San

    2016-01-01

    A method for segmenting water bodies in optical and synthetic aperture radar (SAR) satellite images is proposed. It makes use of the textural features of the different regions in the image for segmentation. The method consists in a multiscale analysis of the images, which allows us to study the images regularity both, locally and globally. As results of the analysis, coarse multifractal spectra of studied images and a group of images that associates each position (pixel) with its corresponding value of local regularity (or singularity) spectrum are obtained. Thresholds are then applied to the multifractal spectra of the images for the classification. These thresholds are selected after studying the characteristics of the spectra under the assumption that water bodies have larger local regularity than other soil types. Classifications obtained by the multifractal method are compared quantitatively with those obtained by neural networks trained to classify the pixels of the images in covered against uncovered b...

  10. New Generation Meteorological Satellite Imager Aviation Decision Support Applications for Detection of Convection, Turbulence, and Volcanic Ash

    Science.gov (United States)

    Feltz, Wayne

    2016-04-01

    A suite of aviation related decision support products have been in development to meet GOES-R science requirements since 2008 and are being evaluated to assess meteorological hazards to aircraft in flight derived from the current generation of European Spinning Enhanced Visible and Infrared Imager (SEVIRI) imager data. This presentation will focus on GOES-R Advanced Baseline Imager (ABI) measurement requirements relating to satellite-based aviation convective, turbulence, and volcanic ash/SO2 products that can be applied globally on next generation geostationary imagers including the Japanese Himawari, South Korean COMS (AMI), and European Metop-SG imagers. These new methodologies have relevance on current generation GOES and SEVIRI imagers, and overview will include discussion on how product utility has been improved through satellite GOES-R/JPSS Proving Ground NOAA testbed activities. Satellite-based decision support for aviation context toward improvement of future air transportation route planning and warning for the general public with emphasis on successfully bridging research to operations will also be discussed with anticipated October 2016 launch of GOES-R.

  11. Topology Adaptive Water Boundary Extraction Based on a Modified Balloon Snake: Using GF-1 Satellite Images as an Example

    Directory of Open Access Journals (Sweden)

    Wenying Du

    2017-02-01

    Full Text Available Topology adaptive water boundary extraction from satellite images using parametric snakes remains challenging in the domain of image segmentation. This paper proposed a modified balloon snake (MB-Snake method based on the balloon snake (B-Snake method, overcoming the B-Snake’s drawbacks of inaccurate positioning, topology inflexibility, and non-automatic contour evolution termination. Six satellite images, acquired by the GF-1 wide field of view sensor and with water bodies of different types, inner land numbers, areas, boundary and background complexities, and digital number value contrasts, were used as experimental images, in which the MB-Snake method, and two comparison methods, the B-Snake and the orthogonal topology adaptive snake (OT-Snake methods, were applied for water boundary extraction. All the extracted results were first qualitatively assessed and further quantitatively evaluated via three indexes, including correctness, completeness, and area overlap measure. Both of the qualitative and quantitative evaluation results consistently demonstrated that the MB-Snake method can efficiently improve the positioning accuracy, detect and dispose of topology collisions, and perform automatic contour evolution termination, successfully meeting its design objectives, and exhibiting great superiority to the existing topology-flexible parametric snakes. The sensitivity to initial contours, the effects of model parameters, and spatial resolutions of satellite images, and image demands of the MB-Snake method was also analyzed.

  12. Mutual information registration of multi-spectral and multi-resolution images of DigitalGlobe's WorldView-3 imaging satellite

    Science.gov (United States)

    Miecznik, Grzegorz; Shafer, Jeff; Baugh, William M.; Bader, Brett; Karspeck, Milan; Pacifici, Fabio

    2017-05-01

    WorldView-3 (WV-3) is a DigitalGlobe commercial, high resolution, push-broom imaging satellite with three instruments: visible and near-infrared VNIR consisting of panchromatic (0.3m nadir GSD) plus multi-spectral (1.2m), short-wave infrared SWIR (3.7m), and multi-spectral CAVIS (30m). Nine VNIR bands, which are on one instrument, are nearly perfectly registered to each other, whereas eight SWIR bands, belonging to the second instrument, are misaligned with respect to VNIR and to each other. Geometric calibration and ortho-rectification results in a VNIR/SWIR alignment which is accurate to approximately 0.75 SWIR pixel at 3.7m GSD, whereas inter-SWIR, band to band registration is 0.3 SWIR pixel. Numerous high resolution, spectral applications, such as object classification and material identification, require more accurate registration, which can be achieved by utilizing image processing algorithms, for example Mutual Information (MI). Although MI-based co-registration algorithms are highly accurate, implementation details for automated processing can be challenging. One particular challenge is how to compute bin widths of intensity histograms, which are fundamental building blocks of MI. We solve this problem by making the bin widths proportional to instrument shot noise. Next, we show how to take advantage of multiple VNIR bands, and improve registration sensitivity to image alignment. To meet this goal, we employ Canonical Correlation Analysis, which maximizes VNIR/SWIR correlation through an optimal linear combination of VNIR bands. Finally we explore how to register images corresponding to different spatial resolutions. We show that MI computed at a low-resolution grid is more sensitive to alignment parameters than MI computed at a high-resolution grid. The proposed modifications allow us to improve VNIR/SWIR registration to better than ¼ of a SWIR pixel, as long as terrain elevation is properly accounted for, and clouds and water are masked out.

  13. Global near real-time disturbance monitoring using MODIS satellite image time series

    Science.gov (United States)

    Verbesselt, J.; Kalomenopoulos, M.; de Jong, R.; Zeileis, A.; Herold, M.

    2012-12-01

    Global disturbance monitoring in forested ecosystems is critical to retrieve information on carbon storage dynamics, biodiversity, and other socio-ecological processes. Satellite remote sensing provides a means for cost-effective monitoring at frequent time steps over large areas. However, for information about current change processes, it is required to analyse image time series in a fast and accurate manner and to detect abnormal change in near real time. An increasing number of change detection techniques have become available that are able to process historical satellite image time series data to detect changes in the past. However, methods that detect changes near real-time, i.e. analysing newly acquired data with respect to the historical series, are lacking. We propose a statistical technique for monitoring change in near-real time by comparing current data with a seasonal-trend model fitted onto the historical time series. As such, identification of consistent and abnormal change in near-real time becomes possible as soon as new image data is captured. The method is based on the "Break For Additive Seasonal Trend" (BFAST) concept (http://bfast.r-forge.r-project.org/). Disturbances are detected by analysing 16-daily MODIS combined vegetation and temperature indices. Validation is carried out by comparing the detected disturbances with available disturbance data sets (e.g. deforestation in Brazil and MODIS fire products). Preliminary results demonstrated that abrupt changes at the end of time series can be successfully detected while the method remains robust for strong seasonality and atmospheric noise. Cloud masking, however, was identified as a critical issue since periods of persistent cloudiness can be detected as abnormal change. The proposed method is an automatic and robust change detection approach that can be applied on different types of data (e.g. future sensors like the Sentinel constellation that provide higher spatial resolution at regular time

  14. ASPECT spectral imaging satellite proposal to AIDA/AIM CubeSat payload

    Science.gov (United States)

    Kohout, Tomas; Näsilä, Antti; Tikka, Tuomas; Penttilä, Antti; Muinonen, Karri; Kestilä, Antti; Granvik, Mikael; Kallio, Esa

    2016-04-01

    ASPECT (Asteroid Spectral Imaging Mission) is a part of AIDA/AIM project and aims to study the composition of the Didymos binary asteroid and the effects of space weathering and shock metamorphism in order to gain understanding of the formation and evolution of the Solar System. The joint ESA/NASA AIDA (Asteroid Impact & Deflection Assessment) mission to binary asteroid Didymos consists of AIM (Asteroid Impact Mission, ESA) and DART (Double Asteroid Redirection Test, NASA). DART is targeted to impact Didymos secondary component (Didymoon) and serve as a kinetic impactor to demonstrate deflection of potentially hazardous asteroids. AIM will serve as an observational spacecraft to evaluate the effects of the impact and resulting changes in the Didymos dynamic parameters. The AIM mission will also carry two CubeSat miniaturized satellites, released in Didymoon proximity. This arrangement opens up a possibility for secondary scientific experiments. ASPECT is one of the proposed CubeSat payloads. Whereas Didymos is a space-weathered binary asteroid, the DART impactor is expected to produce a crater and excavate fresh material from the secondary component (Didymoon). Spectral comparison of the mature surface to the freshly exposed material will allow to directly deter-mine space weathering effects. It will be also possible to study spectral shock effects within the impact crater. ASPECT will also demonstrate for the first time the joint spacecraft - CubeSat operations in asteroid proximity and miniature spectral imager operation in deep-space environment. Science objectives: 1. Study of the surface composition of the Didymos system. 2. Photometric observations (and modeling) under varying phase angle and distance. 3. Study of space weathering effects on asteroids (comparison of mature / freshly exposed material). 4. Study of shock effects (spectral properties of crater interior). 5. Observations during the DART impact. Engineering objectives: 1. Demonstration of Cube

  15. A Multi-stage Method to Extract Road from High Resolution Satellite Image

    Science.gov (United States)

    Zhijian, Huang; Zhang, Jinfang; Xu, Fanjiang

    2014-03-01

    Extracting road information from high-resolution satellite images is complex and hardly achieves by exploiting only one or two modules. This paper presents a multi-stage method, consisting of automatic information extraction and semi-automatic post-processing. The Multi-scale Enhancement algorithm enlarges the contrast of human-made structures with the background. The Statistical Region Merging segments images into regions, whose skeletons are extracted and pruned according to geometry shape information. Setting the start and the end skeleton points, the shortest skeleton path is constructed as a road centre line. The Bidirectional Adaptive Smoothing technique smoothens the road centre line and adjusts it to right position. With the smoothed line and its average width, a Buffer algorithm reconstructs the road region easily. Seen from the last results, the proposed method eliminates redundant non-road regions, repairs incomplete occlusions, jumps over complete occlusions, and reserves accurate road centre lines and neat road regions. During the whole process, only a few interactions are needed.

  16. Effective System for Automatic Bundle Block Adjustment and Ortho Image Generation from Multi Sensor Satellite Imagery

    Science.gov (United States)

    Akilan, A.; Nagasubramanian, V.; Chaudhry, A.; Reddy, D. Rajesh; Sudheer Reddy, D.; Usha Devi, R.; Tirupati, T.; Radhadevi, P. V.; Varadan, G.

    2014-11-01

    Block Adjustment is a technique for large area mapping for images obtained from different remote sensingsatellites.The challenge in this process is to handle huge number of satellite imageries from different sources with different resolution and accuracies at the system level. This paper explains a system with various tools and techniques to effectively handle the end-to-end chain in large area mapping and production with good level of automation and the provisions for intuitive analysis of final results in 3D and 2D environment. In addition, the interface for using open source ortho and DEM references viz., ETM, SRTM etc. and displaying ESRI shapes for the image foot-prints are explained. Rigorous theory, mathematical modelling, workflow automation and sophisticated software engineering tools are included to ensure high photogrammetric accuracy and productivity. Major building blocks like Georeferencing, Geo-capturing and Geo-Modelling tools included in the block adjustment solution are explained in this paper. To provide optimal bundle block adjustment solution with high precision results, the system has been optimized in many stages to exploit the full utilization of hardware resources. The robustness of the system is ensured by handling failure in automatic procedure and saving the process state in every stage for subsequent restoration from the point of interruption. The results obtained from various stages of the system are presented in the paper.

  17. A Color-Texture-Structure Descriptor for High-Resolution Satellite Image Classification

    Directory of Open Access Journals (Sweden)

    Huai Yu

    2016-03-01

    Full Text Available Scene classification plays an important role in understanding high-resolution satellite (HRS remotely sensed imagery. For remotely sensed scenes, both color information and texture information provide the discriminative ability in classification tasks. In recent years, substantial performance gains in HRS image classification have been reported in the literature. One branch of research combines multiple complementary features based on various aspects such as texture, color and structure. Two methods are commonly used to combine these features: early fusion and late fusion. In this paper, we propose combining the two methods under a tree of regions and present a new descriptor to encode color, texture and structure features using a hierarchical structure-Color Binary Partition Tree (CBPT, which we call the CTS descriptor. Specifically, we first build the hierarchical representation of HRS imagery using the CBPT. Then we quantize the texture and color features of dense regions. Next, we analyze and extract the co-occurrence patterns of regions based on the hierarchical structure. Finally, we encode local descriptors to obtain the final CTS descriptor and test its discriminative capability using object categorization and scene classification with HRS images. The proposed descriptor contains the spectral, textural and structural information of the HRS imagery and is also robust to changes in illuminant color, scale, orientation and contrast. The experimental results demonstrate that the proposed CTS descriptor achieves competitive classification results compared with state-of-the-art algorithms.

  18. Detection of facilities in satellite imagery using semi-supervized image classification and auxiliary contextual observables

    Science.gov (United States)

    Harvey, Neal R.; Ruggiero, C.; Pawley, N. H.; MacDonald, B.; Oyer, A.; Balick, L.; Brumby, S. P.

    2009-05-01

    Detecting complex targets, such as facilities, in commercially available satellite imagery is a difficult problem that human analysts try to solve by applying world knowledge. Often there are known observables that can be extracted by pixel-level feature detectors that can assist in the facility detection process. Individually, each of these observables is not sufficient for an accurate and reliable detection, but in combination, these auxiliary observables may provide sufficient context for detection by a machine learning algorithm. We describe an approach for automatic detection of facilities that uses an automated feature extraction algorithm to extract auxiliary observables, and a semi-supervised assisted target recognition algorithm to then identify facilities of interest. We illustrate the approach using an example of finding schools in Quickbird image data of Albuquerque, New Mexico. We use Los Alamos National Laboratory's Genie Pro automated feature extraction algorithm to find a set of auxiliary features that should be useful in the search for schools, such as parking lots, large buildings, sports fields and residential areas and then combine these features using Genie Pro's assisted target recognition algorithm to learn a classifier that finds schools in the image data.

  19. Improvement of dem Generation from Aster Images Using Satellite Jitter Estimation and Open Source Implementation

    Science.gov (United States)

    Girod, L.; Nuth, C.; Kääb, A.

    2015-12-01

    The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system embarked on the Terra (EOS AM-1) satellite has been a source of stereoscopic images covering the whole globe at a 15m resolution at a consistent quality for over 15 years. The potential of this data in terms of geomorphological analysis and change detection in three dimensions is unrivaled and needs to be exploited. However, the quality of the DEMs and ortho-images currently delivered by NASA (ASTER DMO products) is often of insufficient quality for a number of applications such as mountain glacier mass balance. For this study, the use of Ground Control Points (GCPs) or of other ground truth was rejected due to the global "big data" type of processing that we hope to perform on the ASTER archive. We have therefore developed a tool to compute Rational Polynomial Coefficient (RPC) models from the ASTER metadata and a method improving the quality of the matching by identifying and correcting jitter induced cross-track parallax errors. Our method outputs more accurate DEMs with less unmatched areas and reduced overall noise. The algorithms were implemented in the open source photogrammetric library and software suite MicMac.

  20. Detection of facilities in satellite imagery using semi-supervised image classification and auxiliary contextual observables

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Neal R [Los Alamos National Laboratory; Ruggiero, Christy E [Los Alamos National Laboratory; Pawley, Norma H [Los Alamos National Laboratory; Brumby, Steven P [Los Alamos National Laboratory; Macdonald, Brian [Los Alamos National Laboratory; Balick, Lee [Los Alamos National Laboratory; Oyer, Alden [Los Alamos National Laboratory

    2009-01-01

    Detecting complex targets, such as facilities, in commercially available satellite imagery is a difficult problem that human analysts try to solve by applying world knowledge. Often there are known observables that can be extracted by pixel-level feature detectors that can assist in the facility detection process. Individually, each of these observables is not sufficient for an accurate and reliable detection, but in combination, these auxiliary observables may provide sufficient context for detection by a machine learning algorithm. We describe an approach for automatic detection of facilities that uses an automated feature extraction algorithm to extract auxiliary observables, and a semi-supervised assisted target recognition algorithm to then identify facilities of interest. We illustrate the approach using an example of finding schools in Quickbird image data of Albuquerque, New Mexico. We use Los Alamos National Laboratory's Genie Pro automated feature extraction algorithm to find a set of auxiliary features that should be useful in the search for schools, such as parking lots, large buildings, sports fields and residential areas and then combine these features using Genie Pro's assisted target recognition algorithm to learn a classifier that finds schools in the image data.

  1. Worldwide widespread decadal-scale decrease of glacier speed revealed using repeat optical satellite images

    Directory of Open Access Journals (Sweden)

    T. Heid

    2011-10-01

    Full Text Available Matching of repeat optical satellite images to derive glacier velocities is an approach that is much used within glaciology. Lately, focus has been put into developing, improving, automating and comparing different image matching methods. This makes it now possible to investigate glacier dynamics within large regions of the world and also between regions to improve knowledge about glacier dynamics in space and time. In this study we investigate whether the negative glacier mass balance seen over large parts of the world has caused the glaciers to change their speeds. The studied regions are Pamir, Caucasus, Penny Ice Cap, Alaska Range and Patagonia. In addition we derive speed changes for Karakoram, a region assumed to have positive mass balance and that contains many surge-type glaciers. We find that the mapped glaciers in the five regions with negative mass balance have decreased their speeds over the last decades, Pamir by 43 % in average per decade, Caucasus by 8 % in average per decade, Penny Ice Cap by 25 % in average per decade, Alaska Range by 11 % in average per decade and Patagonia by 20 % in average per decade. Glaciers in Karakoram have generally increased their speeds, but surging glaciers and glaciers with flow instabilities are most prominent in this area.

  2. The Need of Nested Grids for Aerial and Satellite Images and Digital Elevation Models

    Science.gov (United States)

    Villa, G.; Mas, S.; Fernández-Villarino, X.; Martínez-Luceño, J.; Ojeda, J. C.; Pérez-Martín, B.; Tejeiro, J. A.; García-González, C.; López-Romero, E.; Soteres, C.

    2016-06-01

    Usual workflows for production, archiving, dissemination and use of Earth observation images (both aerial and from remote sensing satellites) pose big interoperability problems, as for example: non-alignment of pixels at the different levels of the pyramids that makes it impossible to overlay, compare and mosaic different orthoimages, without resampling them and the need to apply multiple resamplings and compression-decompression cycles. These problems cause great inefficiencies in production, dissemination through web services and processing in "Big Data" environments. Most of them can be avoided, or at least greatly reduced, with the use of a common "nested grid" for mutiresolution production, archiving, dissemination and exploitation of orthoimagery, digital elevation models and other raster data. "Nested grids" are space allocation schemas that organize image footprints, pixel sizes and pixel positions at all pyramid levels, in order to achieve coherent and consistent multiresolution coverage of a whole working area. A "nested grid" must be complemented by an appropriate "tiling schema", ideally based on the "quad-tree" concept. In the last years a "de facto standard" grid and Tiling Schema has emerged and has been adopted by virtually all major geospatial data providers. It has also been adopted by OGC in its "WMTS Simple Profile" standard. In this paper we explain how the adequate use of this tiling schema as common nested grid for orthoimagery, DEMs and other types of raster data constitutes the most practical solution to most of the interoperability problems of these types of data.

  3. Satellite-based land use mapping: comparative analysis of Landsat-8, Advanced Land Imager, and big data Hyperion imagery

    Science.gov (United States)

    Pervez, Wasim; Uddin, Vali; Khan, Shoab Ahmad; Khan, Junaid Aziz

    2016-04-01

    Until recently, Landsat technology has suffered from low signal-to-noise ratio (SNR) and comparatively poor radiometric resolution, which resulted in limited application for inland water and land use/cover mapping. The new generation of Landsat, the Landsat Data Continuity Mission carrying the Operational Land Imager (OLI), has improved SNR and high radiometric resolution. This study evaluated the utility of orthoimagery from OLI in comparison with the Advanced Land Imager (ALI) and hyperspectral Hyperion (after preprocessing) with respect to spectral profiling of classes, land use/cover classification, classification accuracy assessment, classifier selection, study area selection, and other applications. For each data source, the support vector machine (SVM) model outperformed the spectral angle mapper (SAM) classifier in terms of class discrimination accuracy (i.e., water, built-up area, mixed forest, shrub, and bare soil). Using the SVM classifier, Hyperion hyperspectral orthoimagery achieved higher overall accuracy than OLI and ALI. However, OLI outperformed both hyperspectral Hyperion and multispectral ALI using the SAM classifier, and with the SVM classifier outperformed ALI in terms of overall accuracy and individual classes. The results show that the new generation of Landsat achieved higher accuracies in mapping compared with the previous Landsat multispectral satellite series.

  4. Field survey report and satellite image interpretation of the 2013 Super Typhoon Haiyan in the Philippines

    Science.gov (United States)

    Mas, E.; Bricker, J.; Kure, S.; Adriano, B.; Yi, C.; Suppasri, A.; Koshimura, S.

    2015-04-01

    Three weeks after the deadly Bohol earthquake of Mw 7.2, which claimed at least 222 victims, another disaster struck the Philippines. This time, Super Typhoon Haiyan, also known as Typhoon Yolanda in the Philippines, devastated the Eastern Visayas islands on 8 November 2013. Its classification as a super typhoon was based on its maximum sustained 1 min surface wind speed of 315 km h-1, which is equivalent to a strong Category 5 hurricane on the Saffir-Simpson scale. This was one of the deadliest typhoon events in the Philippines' history, after the 1897 and 1912 tropical cyclones. At least 6268 individuals have been reported dead and 1061 people are missing. In addition, a wide area of destruction was observed in the Eastern Visayas, on Samar and Leyte islands. The International Research Institute of Disaster Science (IRIDeS) at Tohoku University in Sendai, Japan, has deployed several teams for damage recognition, relief support and collaboration with regard to this disaster event. One of the teams, the hazard and damage evaluation team, visited the affected areas in the Eastern Visayas in mid-January 2014. In this paper, we summarize the rapid damage assessment from satellite imagery conducted days after the event and report on the inundation measurements and the damage surveyed in the field. Damage interpretation results by satellite images were qualitatively confirmed for the Tacloban city area on Leyte Island, the most populated city in the Eastern Visayas. During the survey, significant damage was observed from wind and storm surges on poorly designed housing on the east coast of Leyte Island. Damage, mainly from surface waves and winds, was observed on the east coast of Samar Island.

  5. Meteo-marine parameters for highly variable environment in coastal regions from satellite radar images

    Science.gov (United States)

    Pleskachevsky, A. L.; Rosenthal, W.; Lehner, S.

    2016-09-01

    The German Bight of the North Sea is the area with highly variable sea state conditions, intensive ship traffic and with a high density of offshore installations, e.g. wind farms in use and under construction. Ship navigation and the docking on offshore constructions is impeded by significant wave heights HS > 1.3 m. For these reasons, improvements are required in recognition and forecasting of sea state HS in the range 0-3 m. Thus, this necessitates the development of new methods to determine the distribution of meteo-marine parameters from remote sensing data with an accuracy of decimetres for HS. The operationalization of these methods then allows the robust automatic processing in near real time (NRT) to support forecast agencies by providing validations for model results. A new empirical algorithm XWAVE_C (C = coastal) for estimation of significant wave height from X-band satellite-borne Synthetic Aperture Radar (SAR) data has been developed, adopted for coastal applications using TerraSAR-X (TS-X) and Tandem-X (TD-X) satellites in the German Bight and implemented into the Sea Sate Processor (SSP) for fully automatic processing for NRT services. The algorithm is based on the spectral analysis of subscenes and the model function uses integrated image spectra parameters as well as local wind information from the analyzed subscene. The algorithm is able to recognize and remove the influence of non-sea state produced signals in the Wadden Sea areas such as dry sandbars as well as nonlinear SAR image distortions produced by e.g. short wind waves and breaking waves. Also parameters of very short waves, which are not visible in SAR images and produce only unsystematic clutter, can be accurately estimated. The SSP includes XWAVE_C, a pre-filtering procedure for removing artefacts such as ships, seamarks, buoys, offshore constructions and slicks, and an additional procedure performing a check of results based on the statistics of the whole scene. The SSP allows an

  6. Mapping Impervious Surface Expansion using Medium-resolution Satellite Image Time Series: A Case Study in the Yangtze River Delta, China

    Science.gov (United States)

    Gao, Feng; DeColstoun, Eric Brown; Ma, Ronghua; Weng, Qihao; Masek, Jeffrey G.; Chen, Jin; Pan, Yaozhong; Song, Conghe

    2012-01-01

    Cities have been expanding rapidly worldwide, especially over the past few decades. Mapping the dynamic expansion of impervious surface in both space and time is essential for an improved understanding of the urbanization process, land-cover and land-use change, and their impacts on the environment. Landsat and other medium-resolution satellites provide the necessary spatial details and temporal frequency for mapping impervious surface expansion over the past four decades. Since the US Geological Survey opened the historical record of the Landsat image archive for free access in 2008, the decades-old bottleneck of data limitation has gone. Remote-sensing scientists are now rich with data, and the challenge is how to make best use of this precious resource. In this article, we develop an efficient algorithm to map the continuous expansion of impervious surface using a time series of four decades of medium-resolution satellite images. The algorithm is based on a supervised classification of the time-series image stack using a decision tree. Each imerpervious class represents urbanization starting in a different image. The algorithm also allows us to remove inconsistent training samples because impervious expansion is not reversible during the study period. The objective is to extract a time series of complete and consistent impervious surface maps from a corresponding times series of images collected from multiple sensors, and with a minimal amount of image preprocessing effort. The approach was tested in the lower Yangtze River Delta region, one of the fastest urban growth areas in China. Results from nearly four decades of medium-resolution satellite data from the Landsat Multispectral Scanner (MSS), Thematic Mapper (TM), Enhanced Thematic Mapper plus (ETM+) and China-Brazil Earth Resources Satellite (CBERS) show a consistent urbanization process that is consistent with economic development plans and policies. The time-series impervious spatial extent maps derived

  7. Planets across the HR diagram with the Transiting Exoplanet Survey Satellite Full Frame Images

    Science.gov (United States)

    Huang, Xu; Pal, Andras; Wall, Matthew; Liang, Yu; Levine, Alan M.; Owens, Martin; Kraft Vanderspek, Roland; Seager, Sara; Ricker, George R.; TESS Science Team

    2017-06-01

    Discoveries from the Kepler Mission have revealed that planets close to their host stars are common, despite none in our solar system. The Transiting Exoplanet Survey Satellite (TESS) will perform a wide-field survey for planets over ~75%of the sky for the first time. The 30 min cadence TESS Full Frame Images (FFI) will provide observations of more than 10 million stars brighter than magnitude I=16. The FFI targets include stars from all spectral classes, with ages spanning the range ~10 Myr to ~10 Gyr and with metallicities ranging over more than 1 dex.The FFIs will provide an all-sky magnitude limited sample of short period planetary systems. The precision of TESS will enable planet to be discovered around stars ranging from M-dwarfs, to B-dwarfs. In contrast, the Kepler sample is restricted primarily to main-sequence FGK systems, while the TESS short cadence (2 min) stamps will be centered about cooler stars. We present the current status of the TESS full frame image (FFI) photometry and candidate detection pipeline. We update the predicted detection rates of sub-Neptunes, super-Neptunes and giant planets using simulated TESS images with realistic noise characteristics. We expect that TESS will find more than 20000 planets with sizes larger than 2 Earth radius around stars with very diverse properties. We discuss how these findings will help resolve many long standing questions, including the planet occurrence rateas a function of stellar mass, metallicity, and age. Many of these TESS planets will be suitable for ground-based follow up observations that willestablish masses, orbital obliquities and eccentricities, which will help improve our understanding of the formation channels of theseclose-in planets.

  8. Use of MODIS satellite images for detailed lake morphometry: Application to basins with large water level fluctuations

    Science.gov (United States)

    Ovakoglou, George; Alexandridis, Thomas K.; Crisman, Thomas L.; Skoulikaris, Charalampos; Vergos, George S.

    2016-09-01

    Lake morphometry is essential for managing water resources and limnetic ecosystems. For reservoirs that receive high sediment loads, frequent morphometric mapping is necessary to define both the effective life of the reservoir and its water storage capacity for irrigation, power generation, flood control and domestic water supply. The current study presents a methodology for updating the digital depth model (DDM) of lakes and reservoirs with wide intra and interannual fluctuations of water levels using satellite remote sensing. A time series of Terra MODIS satellite images was used to map shorelines formed during the annual water level change cycle, and were validated with concurrent Landsat ETM+ satellite images. The shorelines were connected with in-situ observation of water levels and were treated as elevation contours to produce the DDM using spatial interpolation. The accuracy of the digitized shorelines is within the mapping accuracy of the satellite images, while the resulting DDM is validated using in-situ elevation measurements. Two versions of the DDM were produced to assess the influence of seasonal water fluctuation. Finally, the methodology was applied to Lake Kerkini (Greece) to produce an updated DDM, which was compared with the last available bathymetric survey (1991) and revealed changes in sediment distribution within the lake.

  9. Application of Texture Characteristics for Urban Feature Extraction from Optical Satellite Images

    Directory of Open Access Journals (Sweden)

    D.Shanmukha Rao

    2014-12-01

    Full Text Available Quest of fool proof methods for extracting various urban features from high resolution satellite imagery with minimal human intervention has resulted in developing texture based algorithms. In view of the fact that the textural properties of images provide valuable information for discrimination purposes, it is appropriate to employ texture based algorithms for feature extraction. The Gray Level Co-occurrence Matrix (GLCM method represents a highly efficient technique of extracting second order statistical texture features. The various urban features can be distinguished based on a set of features viz. energy, entropy, homogeneity etc. that characterize different aspects of the underlying texture. As a preliminary step, notable numbers of regions of interests of the urban feature and contrast locations are identified visually. After calculating Gray Level Co-occurrence matrices of these selected regions, the aforementioned texture features are computed. These features can be used to shape a high-dimensional feature vector to carry out content based retrieval. The insignificant features are eliminated to reduce the dimensionality of the feature vector by executing Principal Components Analysis (PCA. The selection of the discriminating features is also aided by the value of Jeffreys-Matusita (JM distance which serves as a measure of class separability Feature identification is then carried out by computing these chosen feature vectors for every pixel of the entire image and comparing it with their corresponding mean values. This helps in identifying and classifying the pixels corresponding to urban feature being extracted. To reduce the commission errors, various index values viz. Soil Adjusted Vegetation Index (SAVI, Normalized Difference Vegetation Index (NDVI and Normalized Difference Water Index (NDWI are assessed for each pixel. The extracted output is then median filtered to isolate the feature of interest after removing the salt and pepper

  10. High-sensitive bioorthogonal SERS tag for live cancer cell imaging by self-assembling core-satellites structure gold-silver nanocomposite.

    Science.gov (United States)

    Chen, Meng; Zhang, Ling; Gao, Mingxia; Zhang, Xiangmin

    2017-09-01

    A novel, high-sensitivity, biocompatible SERS tag with core-shell structure based on gold nanoparticles containing alkynyl molecule core -silver nanoparticle satellites shell was fabricated for the first time to be used for live cancer cells Surface enhanced Raman scattering (SERS) imaging. (E)-2-((4-(phenylethynyl)benzylidene) amino) ethanethiol (PBAT) synthesized facilely in our lab is the Raman-silence region reporter which is advantage for bioorthogonal SERS cell imaging. In order to enhance the intensity of the Raman tags for live cancer cell imaging, a series of news measures have been adopted. Firstly, reporter molecules of the PBAT were added twice, which is embedded in the gold core with the reduction of tetrachloroaurate and then PBAT is conjugated again on disperse gold nanoparticles (PBAT-Au). Furthermore, numerous Ag nanoparticles self-assembly were densely arranged around PBAT-Au core surface (PBAT- Au@Ag), just like a circle of satellites cluster, which produce obvious "hot spots" effects enhancing the signal of the Raman tags enormously. Finally, Bovine serum albumin (BSA) and polydopamine (PDA) coated on the PBAT- Au@Ag successively, defined as (PBAT-Au@Ag@BSA@PDA), which make as-synthesized nanocomposites own features of bio-compatibility and facilitates antibody modification. Compared with Au@PBAT@PDA, PBAT-Au@Ag@BSA@PDA with core-shell satellites structure showed 10-fold increase in the Raman signals intensity. Moreover, PBAT-Au@Ag@BSA@PDA nanocomposites were successfully applied in the Raman imaging of human glioma cells (U251) by the recognition of the anti-epidermal growth factor receptor (EGFR). All experimental results demonstrated that the nanocomposites have high value and huge potential application in the live cancer cells imaging and biomedical diagnostics in the near future. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Applying Support Vector Machine in classifying satellite images for the assessment of urban sprawl

    Science.gov (United States)

    murgante, Beniamino; Nolè, Gabriele; Lasaponara, Rosa; Lanorte, Antonio; Calamita, Giuseppe

    2013-04-01

    In last decades the spreading of new buildings, road infrastructures and a scattered proliferation of houses in zones outside urban areas, produced a countryside urbanization with no rules, consuming soils and impoverishing the landscape. Such a phenomenon generated a huge environmental impact, diseconomies and a decrease in life quality. This study analyzes processes concerning land use change, paying particular attention to urban sprawl phenomenon. The application is based on the integration of Geographic Information Systems and Remote Sensing adopting open source technologies. The objective is to understand size distribution and dynamic expansion of urban areas in order to define a methodology useful to both identify and monitor the phenomenon. In order to classify "urban" pixels, over time monitoring of settlements spread, understanding trends of artificial territories, classifications of satellite images at different dates have been realized. In order to obtain these classifications, supervised classification algorithms have been adopted. More particularly, Support Vector Machine (SVM) learning algorithm has been applied to multispectral remote data. One of the more interesting features in SVM is the possibility to obtain good results also adopting few classification pixels of training areas. SVM has several interesting features, such as the capacity to obtain good results also adopting few classification pixels of training areas, a high possibility of configuration parameters and the ability to discriminate pixels with similar spectral responses. Multi-temporal ASTER satellite data at medium resolution have been adopted because are very suitable in evaluating such phenomena. The application is based on the integration of Geographic Information Systems and Remote Sensing technologies by means of open source software. Tools adopted in managing and processing data are GRASS GIS, Quantum GIS and R statistical project. The area of interest is located south of Bari

  12. Can Airborne Laser Scanning (ALS and Forest Estimates Derived from Satellite Images Be Used to Predict Abundance and Species Richness of Birds and Beetles in Boreal Forest?

    Directory of Open Access Journals (Sweden)

    Eva Lindberg

    2015-04-01

    Full Text Available In managed landscapes, conservation planning requires effective methods to identify high-biodiversity areas. The objective of this study was to evaluate the potential of airborne laser scanning (ALS and forest estimates derived from satellite images extracted at two spatial scales for predicting the stand-scale abundance and species richness of birds and beetles in a managed boreal forest landscape. Multiple regression models based on forest data from a 50-m radius (i.e., corresponding to a homogenous forest stand had better explanatory power than those based on a 200-m radius (i.e., including also parts of adjacent stands. Bird abundance and species richness were best explained by the ALS variables “maximum vegetation height” and “vegetation cover between 0.5 and 3 m” (both positive. Flying beetle abundance and species richness, as well as epigaeic (i.e., ground-living beetle richness were best explained by a model including the ALS variable “maximum vegetation height” (positive and the satellite-derived variable “proportion of pine” (negative. Epigaeic beetle abundance was best explained by “maximum vegetation height” at 50 m (positive and “stem volume” at 200 m (positive. Our results show that forest estimates derived from satellite images and ALS data provide complementary information for explaining forest biodiversity patterns. We conclude that these types of remote sensing data may provide an efficient tool for conservation planning in managed boreal landscapes.

  13. AROSICS: An Automated and Robust Open-Source Image Co-Registration Software for Multi-Sensor Satellite Data

    Directory of Open Access Journals (Sweden)

    Daniel Scheffler

    2017-07-01

    Full Text Available Geospatial co-registration is a mandatory prerequisite when dealing with remote sensing data. Inter- or intra-sensoral misregistration will negatively affect any subsequent image analysis, specifically when processing multi-sensoral or multi-temporal data. In recent decades, many algorithms have been developed to enable manual, semi- or fully automatic displacement correction. Especially in the context of big data processing and the development of automated processing chains that aim to be applicable to different remote sensing systems, there is a strong need for efficient, accurate and generally usable co-registration. Here, we present AROSICS (Automated and Robust Open-Source Image Co-Registration Software, a Python-based open-source software including an easy-to-use user interface for automatic detection and correction of sub-pixel misalignments between various remote sensing datasets. It is independent of spatial or spectral characteristics and robust against high degrees of cloud coverage and spectral and temporal land cover dynamics. The co-registration is based on phase correlation for sub-pixel shift estimation in the frequency domain utilizing the Fourier shift theorem in a moving-window manner. A dense grid of spatial shift vectors can be created and automatically filtered by combining various validation and quality estimation metrics. Additionally, the software supports the masking of, e.g., clouds and cloud shadows to exclude such areas from spatial shift detection. The software has been tested on more than 9000 satellite images acquired by different sensors. The results are evaluated exemplarily for two inter-sensoral and two intra-sensoral use cases and show registration results in the sub-pixel range with root mean square error fits around 0.3 pixels and better.

  14. Crop Investigation Using High-Resolution Worldview-1 and Quickbird-2 Satellite Images on a Test Site in Bulgaria

    Science.gov (United States)

    Vassilev, Vassil

    2013-12-01

    The paper aims to investigate the capabilities of using high-resolution satellite images: panchromatic WorldView-1 satellite image acquired on 30/11/2011 and multispectral QuickBird-2 satellite image acquired on 31/05/2009 for crop analysis, which includes crop identification, crop condition assessment and crop area estimates applications in Bulgaria using the power and flexibility of ERDAS IMAGINE tools. The crop identification was accomplished using unsupervised and supervised classification processing techniques using as reference ground data. After the supervised classification, fuzzy convolution filter was applied to reduce the mixed pixels using ERDAS Imagine software. Accuracy totals, error matrix and kappa statistics were calculated using accuracy assessment tool in ERDAS Imagine to assess the quality of the classification process. Crop condition assessment was accomplished using the derived Normalized Difference Vegetation Index (NDVI) image from the QuickBird-2 image, which was reclassified and was given meaningful estimations on the crop condition. Crop area was estimated using pixel counting approach. Pixel counting methods are known for introducing bias to the crop area estimates but using the high Overall Accuracy of 90.86% and overall Kappa Statistics of 0.8538 for the classified QuickBird-2 image and Overall Accuracy of 86.71% and overall Kappa Statistics of 0.7721% for the classified WorldView-1 allows that option to be utilized according to (Gallego, 2004). As a conclusion it can be stated that using the benefits that high-resolution satellite images gives in combination with the power and flexibility of ERDAS Imagine tools, crop identification can be achieved more accurately by increasing the identification accuracy and also by having the necessary ground information for selecting appropriate training samples. Crop identification by applying an arable mask is better practice, because it is reducing the mixed pixels problem i.e. also known as

  15. Detecting the effects of hydrocarbon pollution in the Amazon forest using hyperspectral satellite images.

    Science.gov (United States)

    Arellano, Paul; Tansey, Kevin; Balzter, Heiko; Boyd, Doreen S

    2015-10-01

    The global demand for fossil energy is triggering oil exploration and production projects in remote areas of the world. During the last few decades hydrocarbon production has caused pollution in the Amazon forest inflicting considerable environmental impact. Until now it is not clear how hydrocarbon pollution affects the health of the tropical forest flora. During a field campaign in polluted and pristine forest, more than 1100 leaf samples were collected and analysed for biophysical and biochemical parameters. The results revealed that tropical forests exposed to hydrocarbon pollution show reduced levels of chlorophyll content, higher levels of foliar water content and leaf structural changes. In order to map this impact over wider geographical areas, vegetation indices were applied to hyperspectral Hyperion satellite imagery. Three vegetation indices (SR, NDVI and NDVI705) were found to be the most appropriate indices to detect the effects of petroleum pollution in the Amazon forest.

  16. Using Sentinel-1 and Landsat 8 satellite images to estimate surface soil moisture content.

    Science.gov (United States)

    Mexis, Philippos-Dimitrios; Alexakis, Dimitrios D.; Daliakopoulos, Ioannis N.; Tsanis, Ioannis K.

    2016-04-01

    Nowadays, the potential for more accurate assessment of Soil Moisture (SM) content exploiting Earth Observation (EO) technology, by exploring the use of synergistic approaches among a variety of EO instruments has emerged. This study is the first to investigate the potential of Synthetic Aperture Radar (SAR) (Sentinel-1) and optical (Landsat 8) images in combination with ground measurements to estimate volumetric SM content in support of water management and agricultural practices. SAR and optical data are downloaded and corrected in terms of atmospheric, geometric and radiometric corrections. SAR images are also corrected in terms of roughness and vegetation with the synergistic use of Oh and Topp models using a dataset consisting of backscattering coefficients and corresponding direct measurements of ground parameters (moisture, roughness). Following, various vegetation indices (NDVI, SAVI, MSAVI, EVI, etc.) are estimated to record diachronically the vegetation regime within the study area and as auxiliary data in the final modeling. Furthermore, thermal images from optical data are corrected and incorporated to the overall approach. The basic principle of Thermal InfraRed (TIR) method is that Land Surface Temperature (LST) is sensitive to surface SM content due to its impact on surface heating process (heat capacity and thermal conductivity) under bare soil or sparse vegetation cover conditions. Ground truth data are collected from a Time-domain reflectometer (TRD) gauge network established in western Crete, Greece, during 2015. Sophisticated algorithms based on Artificial Neural Networks (ANNs) and Multiple Linear Regression (MLR) approaches are used to explore the statistical relationship between backscattering measurements and SM content. Results highlight the potential of SAR and optical satellite images to contribute to effective SM content detection in support of water resources management and precision agriculture. Keywords: Sentinel-1, Landsat 8, Soil

  17. Integrating multisensor satellite data merging and image reconstruction in support of machine learning for better water quality management.

    Science.gov (United States)

    Chang, Ni-Bin; Bai, Kaixu; Chen, Chi-Farn

    2017-10-01

    Monitoring water quality changes in lakes, reservoirs, estuaries, and coastal waters is critical in response to the needs for sustainable development. This study develops a remote sensing-based multiscale modeling system by integrating multi-sensor satellite data merging and image reconstruction algorithms in support of feature extraction with machine learning leading to automate continuous water quality monitoring in environmentally sensitive regions. This new Earth observation platform, termed "cross-mission data merging and image reconstruction with machine learning" (CDMIM), is capable of merging multiple satellite imageries to provide daily water quality monitoring through a series of image processing, enhancement, reconstruction, and data mining/machine learning techniques. Two existing key algorithms, including Spectral Information Adaptation and Synthesis Scheme (SIASS) and SMart Information Reconstruction (SMIR), are highlighted to support feature extraction and content-based mapping. Whereas SIASS can support various data merging efforts to merge images collected from cross-mission satellite sensors, SMIR can overcome data gaps by reconstructing the information of value-missing pixels due to impacts such as cloud obstruction. Practical implementation of CDMIM was assessed by predicting the water quality over seasons in terms of the concentrations of nutrients and chlorophyll-a, as well as water clarity in Lake Nicaragua, providing synergistic efforts to better monitor the aquatic environment and offer insightful lake watershed management strategies. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. 18F-FDG PET/CT/MRI Fusion Images Showing Cranial and Peripheral Nerve Involvement in Neurolymphomatosis

    Science.gov (United States)

    Trevisan, Ana Carolina; Ribeiro, Fernanda Borges; Itikawa, Emerson Nobuyuki; Alexandre, Leonardo Santos; Pitella, Felipe Arriva; Santos, Antonio Carlos; Simões, Belinda Pinto; Wichert-Ana, Lauro

    2017-01-01

    We report a 56-year-old female patient with non-Hodgkin's diffuse large B cell lymphoma (NHL) who, on magnetic resonance imaging (MRI) with a T1 weighted and gadolinium-enhanced imaging, was found to have thickening and infiltration in 75% of peripheral nerves of the patient and enlargements of cranial nerves, possibly related to lymphomatous infiltration. Subsequent positron emission tomography/computed tomography (PET/CT) using 18F-labeled 2-deoxy-2-fluoro-d-glucose (18F-FDG) showed widespread active involvement of the cervical plexus, bilateral peripheral nerves, right femoral nerve, the parasellar region of the skull, and marked hypermetabolism in the left trigeminal ganglia. This case re-emphasizes that while CT and MRI provide anatomical details, 18F-FDG PET/CT images better delineate the metabolic activity of neurolymphomatosis (NL) in the peripheral and central nervous system.

  19. Ground truth measurements plan for the Multispectral Thermal Imager (MTI) satellite

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, A.J.

    2000-01-03

    Sandia National Laboratories (SNL), Los Alamos National Laboratory (LANL), and the Savannah River Technology Center (SRTC) have developed a diverse group of algorithms for processing and analyzing the data that will be collected by the Multispectral Thermal Imager (MTI) after launch late in 1999. Each of these algorithms must be verified by comparison to independent surface and atmospheric measurements. SRTC has selected 13 sites in the continental U.S. for ground truth data collections. These sites include a high altitude cold water target (Crater Lake), cooling lakes and towers in the warm, humid southeastern US, Department of Energy (DOE) climate research sites, the NASA Stennis satellite Validation and Verification (V and V) target array, waste sites at the Savannah River Site, mining sites in the Four Corners area and dry lake beds in the southwestern US. SRTC has established mutually beneficial relationships with the organizations that manage these sites to make use of their operating and research data and to install additional instrumentation needed for MTI algorithm V and V.

  20. Processing of Satellite Digital Images for Mapping Atmospheric Transmissivity in Bangladesh

    Directory of Open Access Journals (Sweden)

    Md Shahjahan Ali

    2013-03-01

    Full Text Available This study investigates the potential of determining atmospheric transmissivity (τ from NOAA-AVHRR satellite images using a simple methodology. Using this method, hourly transmissivity values over the land surface area of Bangladesh has been determined. The spatio-temporal distribution of τ has been studied by constructing monthly average maps for the whole country for one complete year (February 2005 to January 2006. Yearly average map has been prepared by integrating monthly average maps. Geographical distribution of τ exhibits patterns and trends. It is observed that the value of τ varies from 0.3 to 0.65 with the average maximum value in the month of April and minimum value in the month of November. It is also observed that for western parts of the country, which is the drought prone area, transmissivity values are little bit higher than that at the eastern parts. Relatively lower values of τ in the dry months (November to January may be due to the effect of particulate or chemical pollution in the atmosphere.

  1. Bottom Topographic Changes of Poyang Lake During Past Decade Using Multi-temporal Satellite Images

    Science.gov (United States)

    Zhang, S.

    2015-12-01

    Poyang Lake, as a well-known international wetland in the Ramsar Convention List, is the largest freshwater lake in China. It plays crucial ecological role in flood storage and biological diversity. Poyang Lake is facing increasingly serious water crises, including seasonal dry-up, decreased wetland area, and water resource shortage, all of which are closely related to progressive bottom topographic changes over recent years. Time-series of bottom topography would contribute to our understanding of the lake's evolution during the past several decades. However, commonly used methods for mapping bottom topography fail to frequently update quality bathymetric data for Poyang Lake restricted by weather and accessibility. These deficiencies have limited our ability to characterize the bottom topographic changes and understanding lake erosion or deposition trend. To fill the gap, we construct a decadal bottom topography of Poyang Lake with a total of 146 time series medium resolution satellite images based on the Waterline Method. It was found that Poyang Lake has eroded with a rate of -14.4 cm/ yr from 2000 to 2010. The erosion trend was attributed to the impacts of human activities, especially the operation of the Three Gorge Dams, sand excavation, and the implementation of water conservancy project. A decadal quantitative understanding bottom topography of Poyang Lake might provide a foundation to model the lake evolutionary processes and assist both researchers and local policymakers in ecological management, wetland protection and lake navigation safety.

  2. AUTOMATIC ROAD EXTRACTION FROM SATELLITE IMAGES USING EXTENDED KALMAN FILTERING AND EFFICIENT PARTICLE FILTERING

    Directory of Open Access Journals (Sweden)

    Jenita Subash

    2011-12-01

    Full Text Available Users of geospatial data in government, military, industry, research, and other sectors have need foraccurate display of roads and other terrain information in areas where there are ongoing operations orlocations of interest. Hence, road extraction that is significantly more automated than the employment ofcostly and scarce human resources has become a challenging technical issue for the geospatialcommunity. An automatic road extraction based on Extended Kalman Filtering (EKF and variablestructured multiple model particle filter (VS-MMPF from satellite images is addressed. EKF traces themedian axis of a single road segment while VS-MMPF traces all road branches initializing at theintersection. In case of Local Linearization Particle filter (LLPF, a large number of particles are usedand therefore high computational expense is usually required in order to attain certain accuracy androbustness. The basic idea is to reduce the whole sampling space of the multiple model system to the modesubspace by marginalization over the target subspace and choose better importance function for modestate sampling. The core of the system is based on profile matching. During the estimation, new referenceprofiles were generated and stored in the road template memory for future correlation analysis, thuscovering the space of road profiles. .

  3. Retreat of glaciers on Puncak Jaya, Irian Jaya, determined from 2000 and 2002 IKONOS satellite images

    Science.gov (United States)

    Klein, Andrew G.; Kincaid, Joni L.

    Puncak Jaya, Irian Jaya, Indonesia, contains the only remaining tropical glaciers in East Asia. The extent of the ice masses on Puncak Jaya has been mapped from high-resolution IKONOS satellite images acquired on 8 June 2000 and 11 June 2002. Exclusive of Southwall Hanging Glacier, the ice extent on Puncak Jaya was 2.326 km2 and 2.152 km2 in 2000 and 2002, respectively. From 2000 to 2002, the Puncak Jaya glaciers lost a surface area of 0.174 km2 or 7.48% of their 2000 ice extent. Comparison of the IKONOS-based glacier extents with previous glacier extents demonstrates a continuing reduction of ice area on Puncak Jaya. By 2000, ice extent on Puncak Jaya had reduced by 88% of its maximum neoglacial extent. Between 1992 and 2000 Meren Glacier disappeared entirely. All remaining ice masses on Puncak Jaya continue their retreat from their neoglacial maxima. Comparison of 2000/2002 ice extents with previous extents suggests that these glaciers have not experienced accelerating rates of retreat during the last half of the 20th century. If the recession rates observed from 2000 to 2002 continue, the remaining ice masses on Puncak Jaya will melt within 50 years.

  4. Repeat optical satellite images reveal widespread and long term decrease in land-terminating glacier speeds

    Directory of Open Access Journals (Sweden)

    T. Heid

    2012-04-01

    Full Text Available By matching of repeat optical satellite images it is now possible to investigate glacier dynamics within large regions of the world and also between regions to improve knowledge about glacier dynamics in space and time. In this study we investigate whether the negative glacier mass balance seen over large parts of the world has caused the glaciers to change their speeds. The studied regions are Pamir, Caucasus, Penny Ice Cap, Alaska Range and Patagonia. In addition we derive speed changes for Karakoram, a region assumed to have positive mass balance and that contains many surge-type glaciers. We find that the mapped glaciers in the five regions with negative mass balance have over the last decades decreased their velocity at an average rate per decade of: 43 % in the Pamir, 8 % in the Caucasus, 25 % on Penny Ice Cap, 11 % in the Alaska Range and 20 % in Patagonia. Glaciers in Karakoram have generally increased their speeds, but surging glaciers and glaciers with flow instabilities are most prominent in this area. Therefore the calculated average speed change is not representative for this area.

  5. THE NEED OF NESTED GRIDS FOR AERIAL AND SATELLITE IMAGES AND DIGITAL ELEVATION MODELS

    Directory of Open Access Journals (Sweden)

    G. Villa

    2016-06-01

    Full Text Available Usual workflows for production, archiving, dissemination and use of Earth observation images (both aerial and from remote sensing satellites pose big interoperability problems, as for example: non-alignment of pixels at the different levels of the pyramids that makes it impossible to overlay, compare and mosaic different orthoimages, without resampling them and the need to apply multiple resamplings and compression-decompression cycles. These problems cause great inefficiencies in production, dissemination through web services and processing in “Big Data” environments. Most of them can be avoided, or at least greatly reduced, with the use of a common “nested grid” for mutiresolution production, archiving, dissemination and exploitation of orthoimagery, digital elevation models and other raster data. “Nested grids” are space allocation schemas that organize image footprints, pixel sizes and pixel positions at all pyramid levels, in order to achieve coherent and consistent multiresolution coverage of a whole working area. A “nested grid” must be complemented by an appropriate “tiling schema”, ideally based on the “quad-tree” concept. In the last years a “de facto standard” grid and Tiling Schema has emerged and has been adopted by virtually all major geospatial data providers. It has also been adopted by OGC in its “WMTS Simple Profile” standard. In this paper we explain how the adequate use of this tiling schema as common nested grid for orthoimagery, DEMs and other types of raster data constitutes the most practical solution to most of the interoperability problems of these types of data.

  6. Procedure to detect impervious surfaces using satellite images and light detection and ranging (lidar) data

    Science.gov (United States)

    Rodríguez-Cuenca, B.; Alonso-Rodríguez, M. C.; Domenech-Tofiño, E.; Valcárcel Sanz, N.; Delgado-Hernández, J.; Peces-Morera, Juan José; Arozarena-Villar, Antonio

    2014-10-01

    The detection of impervious surfaces is an important issue in the study of urban and rural environments. Imperviousness refers to water's inability to pass through a surface. Although impervious surfaces represent a small percentage of the Earth's surface, knowledge of their locations is relevant to planning and managing human activities. Impervious structures are primarily manmade (e.g., roads and rooftops). Impervious surfaces are an environmental concern because many processes that modify the normal function of land, air, and water resources are initiated during their construction. This paper presents a novel method of identifying impervious surfaces using satellite images and light detection and ranging (LIDAR) data. The inputs for the procedure are SPOT images formed by four spectral bands (corresponding to red, green, near-infrared and mid-infrared wavelengths), a digital terrain model, and an .las file. The proposed method computes five decision indexes from the input data to classify the studied area into two categories: impervious (subdivided into buildings and roads) and non-impervious surfaces. The impervious class is divided into two subclasses because the elements forming this category (mainly roads and rooftops) have different spectral and height properties, and it is difficult to combine these elements into one group. The classification is conducted using a decision tree procedure. For every decision index, a threshold is set for which every surface is considered impervious or non-impervious. The proposed method has been applied to four different regions located in the north, center, and south of Spain, providing satisfactory results for every dataset.

  7. A Satellite-Based Imaging Instrumentation Concept for Hyperspectral Thermal Remote Sensing

    Directory of Open Access Journals (Sweden)

    Thomas Udelhoven

    2017-07-01

    Full Text Available This paper describes the concept of the hyperspectral Earth-observing thermal infrared (TIR satellite mission HiTeSEM (High-resolution Temperature and Spectral Emissivity Mapping. The scientific goal is to measure specific key variables from the biosphere, hydrosphere, pedosphere, and geosphere related to two global problems of significant societal relevance: food security and human health. The key variables comprise land and sea surface radiation temperature and emissivity, surface moisture, thermal inertia, evapotranspiration, soil minerals and grain size components, soil organic carbon, plant physiological variables, and heat fluxes. The retrieval of this information requires a TIR imaging system with adequate spatial and spectral resolutions and with day-night following observation capability. Another challenge is the monitoring of temporally high dynamic features like energy fluxes, which require adequate revisit time. The suggested solution is a sensor pointing concept to allow high revisit times for selected target regions (1–5 days at off-nadir. At the same time, global observations in the nadir direction are guaranteed with a lower temporal repeat cycle (>1 month. To account for the demand of a high spatial resolution for complex targets, it is suggested to combine in one optic (1 a hyperspectral TIR system with ~75 bands at 7.2–12.5 µm (instrument NEDT 0.05 K–0.1 K and a ground sampling distance (GSD of 60 m, and (2 a panchromatic high-resolution TIR-imager with two channels (8.0–10.25 µm and 10.25–12.5 µm and a GSD of 20 m. The identified science case requires a good correlation of the instrument orbit with Sentinel-2 (maximum delay of 1–3 days to combine data from the visible and near infrared (VNIR, the shortwave infrared (SWIR and TIR spectral regions and to refine parameter retrieval.

  8. A Satellite-Based Imaging Instrumentation Concept for Hyperspectral Thermal Remote Sensing.

    Science.gov (United States)

    Udelhoven, Thomas; Schlerf, Martin; Segl, Karl; Mallick, Kaniska; Bossung, Christian; Retzlaff, Rebecca; Rock, Gilles; Fischer, Peter; Müller, Andreas; Storch, Tobias; Eisele, Andreas; Weise, Dennis; Hupfer, Werner; Knigge, Thiemo

    2017-07-01

    This paper describes the concept of the hyperspectral Earth-observing thermal infrared (TIR) satellite mission HiTeSEM (High-resolution Temperature and Spectral Emissivity Mapping). The scientific goal is to measure specific key variables from the biosphere, hydrosphere, pedosphere, and geosphere related to two global problems of significant societal relevance: food security and human health. The key variables comprise land and sea surface radiation temperature and emissivity, surface moisture, thermal inertia, evapotranspiration, soil minerals and grain size components, soil organic carbon, plant physiological variables, and heat fluxes. The retrieval of this information requires a TIR imaging system with adequate spatial and spectral resolutions and with day-night following observation capability. Another challenge is the monitoring of temporally high dynamic features like energy fluxes, which require adequate revisit time. The suggested solution is a sensor pointing concept to allow high revisit times for selected target regions (1-5 days at off-nadir). At the same time, global observations in the nadir direction are guaranteed with a lower temporal repeat cycle (>1 month). To account for the demand of a high spatial resolution for complex targets, it is suggested to combine in one optic (1) a hyperspectral TIR system with ~75 bands at 7.2-12.5 µm (instrument NEDT 0.05 K-0.1 K) and a ground sampling distance (GSD) of 60 m, and (2) a panchromatic high-resolution TIR-imager with two channels (8.0-10.25 µm and 10.25-12.5 µm) and a GSD of 20 m. The identified science case requires a good correlation of the instrument orbit with Sentinel-2 (maximum delay of 1-3 days) to combine data from the visible and near infrared (VNIR), the shortwave infrared (SWIR) and TIR spectral regions and to refine parameter retrieval.

  9. Relasphone—Mobile and Participative In Situ Forest Biomass Measurements Supporting Satellite Image Mapping

    Directory of Open Access Journals (Sweden)

    Matthieu Molinier

    2016-10-01

    Full Text Available Due to the high cost of traditional forest plot measurements, the availability of up-to-date in situ forest inventory data has been a bottleneck for remote sensing image analysis in support of the important global forest biomass mapping. Capitalizing on the proliferation of smartphones, citizen science is a promising approach to increase spatial and temporal coverages of in situ forest observations in a cost-effective way. Digital cameras can be used as a relascope device to measure basal area, a forest density variable that is closely related to biomass. In this paper, we present the Relasphone mobile application with extensive accuracy assessment in two mixed forest sites from different biomes. Basal area measurements in Finland (boreal zone were in good agreement with reference forest inventory plot data on pine ( R 2 = 0 . 75 , R M S E = 5 . 33 m 2 /ha, spruce ( R 2 = 0 . 75 , R M S E = 6 . 73 m 2 /ha and birch ( R 2 = 0 . 71 , R M S E = 4 . 98 m 2 /ha, with total relative R M S E ( % = 29 . 66 % . In Durango, Mexico (temperate zone, Relasphone stem volume measurements were best for pine ( R 2 = 0 . 88 , R M S E = 32 . 46 m 3 /ha and total stem volume ( R 2 = 0 . 87 , R M S E = 35 . 21 m 3 /ha. Relasphone data were then successfully utilized as the only reference data in combination with optical satellite images to produce biomass maps. The Relasphone concept has been validated for future use by citizens in other locations.

  10. AssesSeg—A Command Line Tool to Quantify Image Segmentation Quality: A Test Carried Out in Southern Spain from Satellite Imagery

    Directory of Open Access Journals (Sweden)

    Antonio Novelli

    2017-01-01

    Full Text Available This letter presents the capabilities of a command line tool created to assess the quality of segmented digital images. The executable source code, called AssesSeg, was written in Python 2.7 using open source libraries. AssesSeg (University of Almeria, Almeria, Spain; Politecnico di Bari, Bari, Italy implements a modified version of the supervised discrepancy measure named Euclidean Distance 2 (ED2 and was tested on different satellite images (Sentinel-2, Landsat 8, and WorldView-2. The segmentation was applied to plastic covered greenhouse detection in the south of Spain (Almería. AssesSeg outputs were utilized to find the best band combinations for the performed segmentations of the images and showed a clear positive correlation between segmentation accuracy and the quantity of available reference data. This demonstrates the importance of a high number of reference data in supervised segmentation accuracy assessment problems.

  11. Satellite Images Analysis of Temporal Change (1979-2000) of the Mangrove Covertures that Surround the Mandinga Coastal Lagoon, Mexico.

    Science.gov (United States)

    Aldeco-Ramírez, J.; Cervantes-Candelas, A.

    2007-05-01

    Knowledge about the historical condition of the resources and the risk of natural hazards is an urgent necessity in developing countries. Satellite images analysis was applied in this study in order to evaluate coverture changes between 1979 and 2000. Mangroves cover large areas of coastal lagoon shoreline in the tropics and subtropics where they are important components in the productivity and integrity of their ecosystems. Visual and digital analysis of satellite images have been applied since the seventies when the first Land sat satellite was put in orbit. The digital analysis technique is mainly based on the reflectance or spectral response of the different objects laid on the earth surface as captured by the satellite. The results are useful for the environmental assessment of natural resources as forest and crops, and the quantification of hazards as fires, plagues, deforestation and urban expansion. This research surveys satellite images from the Mandinga Lagoon System, a coastal lagoon located to the south of the main port of Veracruz (19.1N, 96.1W), during three periods: 1989 1999 and 2000. The mangrove foliar cover was analyzed throughout the time. The reflectance signal of the mangrove that encircles the lagoon was taken as a base line for reference. The normalized difference vegetation index (NDVI) was computed in order to classify the vegetal coverage along the time. From our analysis we obtained that from 1979 to 1990 and from 1990 to 2000 areas of 122 hectares (approx. 305 acres) and 202 hectares (approx. 505 acres) were lost, respectively. The rates of mangrove trimming of 11.1 and 20.2 hectares yr-1 are high compared with other coastal lagoons of Mexico. The main causes of this deforestation are also discussed along with other factors as, the change of use of land and the fishery declination.

  12. Introduction to the in orbit test and its performance of the first meteorological imager of the Communication, Ocean, and Meteorological Satellite

    Science.gov (United States)

    Kim, D.; Ahn, M. H.

    2013-12-01

    The first geostationary earth observation satellite of Korea, named Communication, Ocean, and Meteorological Satellite (COMS), is successfully launched on 27 June 2010 in Korea Standard Time. After arrival of its operational orbit, the satellite underwent in orbit test (IOT) lasting for about 8 months. During the IOT period, the meteorological imager went through tests for its functional and performance demonstration. With the successful acquisition of the first visible channel image, signal chain from the payload to satellite bus and to the ground is also verified. While waiting for the outgassing operation, several functional tests for the payload are also performed. By taking an observation of different sizes of image, of various object targets such as the Sun, moon, and internal calibration target, it has been demonstrated that the payload performs as commanded, satisfying its functional requirements. After successful operation of outgassing which lasted about 40 days, the first set of infrared images is also successfully acquired and the full performance test started. The radiometric performance of the meteorological imager is tested by signal to noise ratio (SNR) for the visible channel, noise equivalent differential temperature (NEdT) for the infrared channels, and pixel to pixel non-uniformity. In case of the visible channel, SNR of all 8 detectors are obtained using the ground measured parameters and background signals obtained in orbit and are larger than 26 at 5% albedo, exceeding the user requirement value of 10 with a significant margin. The values at 100% albedo also meet the user requirements. Also, the relative variability of detector responsivity among the 8 visible channels meets the user requirement, showing values of about 10% of the user requrirement. For the infrared channels, the NEdT of each detector is well within the user requirement and is comparable with or better than the legacy instruments, except the water vapor channel which is

  13. An image based information system - Architecture for correlating satellite and topological data bases

    Science.gov (United States)

    Bryant, N. A.; Zobrist, A. L.

    1978-01-01

    The paper describes the development of an image based information system and its use to process a Landsat thematic map showing land use or land cover in conjunction with a census tract polygon file to produce a tabulation of land use acreages per census tract. The system permits the efficient cross-tabulation of two or more geo-coded data sets, thereby setting the stage for the practical implementation of models of diffusion processes or cellular transformation. Characteristics of geographic information systems are considered, and functional requirements, such as data management, geocoding, image data management, and data analysis are discussed. The system is described, and the potentialities of its use are examined.

  14. A methodology for near real-time change detection between Unmanned Aerial Vehicle and wide area satellite images

    Science.gov (United States)

    Fytsilis, Anastasios L.; Prokos, Anthony; Koutroumbas, Konstantinos D.; Michail, Dimitrios; Kontoes, Charalambos C.

    2016-09-01

    In this paper a novel integrated hybrid methodology for unsupervised change detection between Unmanned Aerial Vehicle (UAV) and satellite images, which can be utilized in various fields like security applications (e.g. border surveillance) and damage assessment, is proposed. This is a challenging problem mainly due to the difference in geographic coverage and the spatial resolution of the two images, as well as to the acquisition modes which lead to misregistration errors. The methodology consists of the following steps: (a) pre-processing, where the part of the satellite image that corresponds to the UAV image is determined and the UAV image is ortho-rectified using information provided by a Digital Terrain Model, (b) the detection of potential changes, which is based exclusively on intensity and image gradient information, (c) the generation of the region map, where homogeneous regions are produced by the previous potential changes via a seeded region growing algorithm and placed on the region map, and (d) the evaluation of the above regions, in order to characterize them as true changes or not. The methodology has been applied on demanding real datasets with very encouraging results. Finally, its robustness to the misregistration errors is assessed via extensive experimentation.

  15. Quantitative Assessment of Spatio-Temporal Desertification Rates in Azerbaijan during Using Timeseries Landsat-8 Satellite Images

    Science.gov (United States)

    Bayramov, Emil; Mammadov, Ramiz

    2016-07-01

    The main goals of this research are the object-based landcover classification of LANDSAT-8 multi-spectral satellite images in 2014 and 2015, quantification of Normalized Difference Vegetation Indices (NDVI) rates within the land-cover classes, change detection analysis between the NDVIs derived from multi-temporal LANDSAT-8 satellite images and the quantification of those changes within the land-cover classes and detection of changes between land-cover classes. The object-based classification accuracy of the land-cover classes was validated through the standard confusion matrix which revealed 80 % of land-cover classification accuracy for both years. The analysis revealed that the area of agricultural lands increased from 30911 sq. km. in 2014 to 31999 sq. km. in 2015. The area of barelands increased from 3933 sq. km. in 2014 to 4187 sq. km. in 2015. The area of forests increased from 8211 sq. km. in 2014 to 9175 sq. km. in 2015. The area of grasslands decreased from 27176 sq. km. in 2014 to 23294 sq. km. in 2015. The area of urban areas increased from 12479 sq. km. in 2014 to 12956 sq. km. in 2015. The decrease in the area of grasslands was mainly explained by the landuse shifts of grasslands to agricultural and urban lands. The quantification of low and medium NDVI rates revealed the increase within the agricultural, urban and forest land-cover classes in 2015. However, the high NDVI rates within agricultural, urban and forest land-cover classes in 2015 revealed to be lower relative to 2014. The change detection analysis between landscover types of 2014 and 2015 allowed to determine that 7740 sq. km. of grasslands shifted to agricultural landcover type whereas 5442sq. km. of agricultural lands shifted to rangelands. This means that the spatio-temporal patters of agricultural activities occurred in Azerbaijan because some of the areas reduced agricultural activities whereas some of them changed their landuse type to agricultural. Based on the achieved results, it

  16. An Atlas of Original and Mercator-Transformed Satellite-Data Images of the Alboran Sea, August-October 1983,

    Science.gov (United States)

    1985-08-01

    identifiable points on the coast. This was done on an HP-1000 computer using a "Navigation Subsystem" software and a library of "Ground Control Points" (GCP...European, Middle Eastern and N. African coastal ground control points for mapping satellite images, SACLANTCEN SM-170. La Spezia, Italy, SACLANT ASW...DETERMINATE L’UMIDITA’ RELATIVA E LA TEMPERATURA DI RUGIADA 0 DI BRINA MEDIANTE LO PSICROMETRO. AERONAUTICA MILITARE Italiana. Ispettorato delle

  17. Prospects of using the k-NN method of classification of satellite images for the forest inventory in Ukraine

    OpenAIRE

    V. Myroniuk

    2015-01-01

    This paper deals with modern experience of statistical inventory of forests using ground-based inventory and remote sensing data (RSD). A detailed analysis of the k-NN method of classification of satellite images is given and features of its applying for thematic mapping of forest fund under the statistical forest inventory defined. The algorithm for calculating the stock of plantings for the statistical software with R open source is shown on the example of local research material.

  18. Global mesospheric tidal winds observed by the high resolution Doppler imager on board the upper atmosphere research satellite

    Energy Technology Data Exchange (ETDEWEB)

    Morton, Y.T.; Lieberman, R.S.; Hays, P.B.; Ortland, D.A.; Marshall, A.R.; Wu, D.; Skinner, W.R.; Burrage, M.D.; Gell, D.A.; Yee, J.H.

    1993-06-18

    This paper presents results of mesospheric and lower thermospheric wind tides. The observations come from the high resolution doppler imager (HRDI) on board the upper atmosphere research satellite. From these observations, the authors report the observation of tidal effects on top of the meridonal winds observed in this region. Previous measurements have been mainly limited to radar measurements from fixed ground stations, which do not give consistent results, and do not provide a global picture of the wave structure.

  19. SATURNʼS INNER SATELLITES: ORBITS, MASSES, AND THE CHAOTIC MOTION OF ATLAS FROM NEW CASSINI IMAGING OBSERVATIONS

    OpenAIRE

    Cooper, Nicholas J.; Renner, Stéfan; Murray, Carl D.; Evans, Michael W.

    2015-01-01

    International audience; We present numerically derived orbits and mass estimates for the inner Saturnian satellites, Atlas, Prometheus, Pandora, Janus, and Epimetheus from a fit to 2580 new Cassini Imaging Science Subsystem astrometric observations spanning 2004 February to 2013 August. The observations are provided as machine-readable and Virtual Observatory tables. We estimate GM Atlas = (0.384 ± 0.001) × 10 −3 km 3 s −2 , a value 13% smaller than the previously published estimate but with ...

  20. Face-selective regions show invariance to linear, but not to non-linear, changes in facial images.

    Science.gov (United States)

    Baseler, Heidi A; Young, Andrew W; Jenkins, Rob; Mike Burton, A; Andrews, Timothy J

    2016-12-01

    Familiar face recognition is remarkably invariant across huge image differences, yet little is understood concerning how image-invariant recognition is achieved. To investigate the neural correlates of invariance, we localized the core face-responsive regions and then compared the pattern of fMR-adaptation to different stimulus transformations in each region to behavioural data demonstrating the impact of the same transformations on familiar face recognition. In Experiment 1, we compared linear transformations of size and aspect ratio to a non-linear transformation affecting only part of the face. We found that adaptation to facial identity in face-selective regions showed invariance to linear changes, but there was no invariance to non-linear changes. In Experiment 2, we measured the sensitivity to non-linear changes that fell within the normal range of variation across face images. We found no adaptation to facial identity for any of the non-linear changes in the image, including to faces that varied in different levels of caricature. These results show a compelling difference in the sensitivity to linear compared to non-linear image changes in face-selective regions of the human brain that is only partially consistent with their effect on behavioural judgements of identity. We conclude that while regions such as the FFA may well be involved in the recognition of face identity, they are more likely to contribute to some form of normalisation that underpins subsequent recognition than to form the neural substrate of recognition per se. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. A Comparative Analysis and Evaluation of Neka River Basin Deforested Land from 1977-2006 using MSS, TM and ETM Satellite Images

    Directory of Open Access Journals (Sweden)

    Hassan Ahmadi

    2013-07-01

    Full Text Available The main objective of this study is to find out the loss of forest area through analyzing it in different periods. In general, deforestation can be regarded as one of the most important elements in LULC and the scenario of global changes is taking place around the world. Therefore, it is worth assessing its trend and the rate at which it is taking place now. These changes will play a significant role in bringing about some changes in regional climate and accordingly on biodiversity. The loss of forest in Iran is going on since 1960 onwards in the Neka river Basin. The estimation of forest loss was not reported to be done by using Satellite data. The changes occurring in forest cover were reported by a series of four satellite images in different time intervals by using Remote Sensing (RS and GIS such as Land satMSS of 1977, Land satTM of1987, ETM 2001 and ETM+ 2006. The forest covers were analyzed and maps from four temporal satellite datasets were prepared. Based on 1977, 1987, 2001 and 2006 satellite data interpretation, the forest cover was converted to geospatial database. According to the results obtained from these images, there was a decrease in forest area (7096.63, productive forest area, as well as degraded forest area. However, the total forest area showed a decrease in the first period (1977-1987 although an increase was reported again during the second period (1987-2001 to 2418.82 hectares (3.5% of the study area, this trend continued even between 2001-2006 and the mixed forest cover increased by856.08 hectares (1.31%. This increase was due to few hectares of mixed forest area was converted into manmade forest.

  2. Vegetation Cover Change in the Upper Kings River Basin of the Sierra Nevada Detected Using Landsat Satellite Image Analysis

    Science.gov (United States)

    Potter, Christopher S.

    2015-01-01

    The Sierra Nevada of California is a region where large wildfires have been suppressed for over a century. A detailed geographic record of recent changes in vegetation cover across the Sierra Nevada remains a gap that can be filled with satellite remote sensing data. Results from Landsat image analysis over the past 25 years in the Upper Kings River basin showed that consistent, significant increases in the normalized difference vegetation index (NDVI) have not extended above 2000 m elevation, where cold temperatures presumably limit the growing season. Moreover, mean increases in NDVI since 1986 at elevations below 2000 m (which cover about half of the total basin area) have not exceeded 9%, even in the most extreme precipitation yearly comparisons. NDVI has decreased significantly at elevations above 2000 m throughout the basin in relatively wet year comparisons since the mid-1980s. These findings conflict with any assumptions that ET fluxes and river flows downstream could have been markedly altered by vegetation change over most of the Upper Kings River basin in recent decades.

  3. Mapping species of submerged aquatic vegetation with multi-seasonal satellite images and considering life history information

    Science.gov (United States)

    Luo, Juhua; Duan, Hongtao; Ma, Ronghua; Jin, Xiuliang; Li, Fei; Hu, Weiping; Shi, Kun; Huang, Wenjiang

    2017-05-01

    Spatial information of the dominant species of submerged aquatic vegetation (SAV) is essential for restoration projects in eutrophic lakes, especially eutrophic Taihu Lake, China. Mapping the distribution of SAV species is very challenging and difficult using only multispectral satellite remote sensing. In this study, we proposed an approach to map the distribution of seven dominant species of SAV in Taihu Lake. Our approach involved information on the life histories of the seven SAV species and eight distribution maps of SAV from February to October. The life history information of the dominant SAV species was summarized from the literature and field surveys. Eight distribution maps of the SAV were extracted from eight 30 m HJ-CCD images from February to October in 2013 based on the classification tree models, and the overall classification accuracies for the SAV were greater than 80%. Finally, the spatial distribution of the SAV species in Taihu in 2013 was mapped using multilayer erasing approach. Based on validation, the overall classification accuracy for the seven species was 68.4%, and kappa was 0.6306, which suggests that larger differences in life histories between species can produce higher identification accuracies. The classification results show that Potamogeton malaianus was the most widely distributed species in Taihu Lake, followed by Myriophyllum spicatum, Potamogeton maackianus, Potamogeton crispus, Elodea nuttallii, Ceratophyllum demersum and Vallisneria spiralis. The information is useful for planning shallow-water habitat restoration projects.

  4. Application of Fuzzy Set Theory and SPOT Satellite Images in Site Selection of Public Libraries (Case Study: Saqqez City, Iran

    Directory of Open Access Journals (Sweden)

    Heydar Dashti Nasserabadi

    2013-06-01

    Full Text Available Easy availability to public libraries is one of the main keys in successful presentation of public library services with high quality will be valueless for those have not access to them. Availability to services should be configured in such a way that maximizes easiness and facility for potential and de facto users. In present research the required number of public libraries and establishment situation of public libraries in Saqqez city in Kurdistan province in North West of Iran were investigated and evaluated by using fuzzy set theory and SPOT 5 satellite images in 2009. In addition, optimum regions for generation of new public libraries were distinguished in city area in form of recommended map. Results showed that weighting variables classes were determined between 0-1 (profusion proportion. Fuzzification each one of effective factors using IDRISI software terminated and after was assigned type and shape membership function. Final map of suitable regions for construction of new public libraries in saqqez city area indicates that none of the libraries were situated in suitable regions.

  5. Design and Implementation of a Real-time Processing System of Full Resolution Quick-look Image of HJ-1 Environmental Satellite C SAR Based on High Performance Cluster

    Directory of Open Access Journals (Sweden)

    Li Jing-shan

    2014-06-01

    Full Text Available This study is concerned with the design and implementation of a real-time processing system of full resolution quick-look image of HJ-1 environmental satellite C SAR based on high-performance clusters. The system processes the first quick-look SAR image on December 9, 2012. The results show that the design and implementation of the quick-look processing system satisfies the real-time SAR image processing performance requirements at full resolution. Moreover, this system is the first real-time business system of full-resolution quick-look spaceborne SAR images in China.

  6. Saturn's inner satellites: Orbits, masses, and the chaotic motion of atlas from new Cassini imaging observations

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, N. J.; Murray, C. D. [Astronomy Unit, School of Physics and Astronomy, Queen Mary University of London, Mile End Road, London, E1 4NS (United Kingdom); Renner, S. [Université Lille 1, Laboratoire d' Astronomie de Lille (LAL), 1 impasse de l' Observatoire, F-59000 Lille (France); Evans, M. W. [Department of Astronomy, Cornell University, Ithaca, NY 14853 (United States)

    2015-01-01

    We present numerically derived orbits and mass estimates for the inner Saturnian satellites, Atlas, Prometheus, Pandora, Janus, and Epimetheus from a fit to 2580 new Cassini Imaging Science Subsystem astrometric observations spanning 2004 February to 2013 August. The observations are provided as machine-readable and Virtual Observatory tables. We estimate GM{sub Atlas} = (0.384 ± 0.001) × 10{sup −3} km{sup 3} s{sup −2}, a value 13% smaller than the previously published estimate but with an order of magnitude reduction in the uncertainty. We also find GM{sub Prometheus} = (10.677 ± 0.006) × 10{sup −3} km{sup 3} s{sup −2}, GM{sub Pandora} = (9.133 ± 0.009) × 10{sup −3} km{sup 3} s{sup −2}, GM{sub Janus} = (126.51 ± 0.03) × 10{sup −3} km{sup 3} s{sup −2}, and GM{sub Epimetheus} = (35.110 ± 0.009) × 10{sup −3} km{sup 3} s{sup −2}, consistent with previously published values, but also with significant reductions in uncertainties. We show that Atlas is currently librating in both the 54:53 co-rotation-eccentricity resonance (CER) and the 54:53 inner Lindblad (ILR) resonance with Prometheus, making it the latest example of a coupled CER-ILR system, in common with the Saturnian satellites Anthe, Aegaeon, and Methone, and possibly Neptune's ring arcs. We further demonstrate that Atlas's orbit is chaotic, with a Lyapunov time of ∼10 years, and show that its chaotic behavior is a direct consequence of the coupled resonant interaction with Prometheus, rather than being an indirect effect of the known chaotic interaction between Prometheus and Pandora. We provide an updated analysis of the second-order resonant perturbations involving Prometheus, Pandora, and Epimetheus based on the new observations, showing that these resonant arguments are librating only when Epimetheus is the innermost of the co-orbital pair, Janus and Epimetheus. We also find evidence that the known chaotic changes in the orbits of Prometheus and Pandora are not

  7. Saturnʼs Inner Satellites: Orbits, Masses, and the Chaotic Motion of Atlas from New Cassini Imaging Observations

    Science.gov (United States)

    Cooper, N. J.; Renner, S.; Murray, C. D.; Evans, M. W.

    2015-01-01

    We present numerically derived orbits and mass estimates for the inner Saturnian satellites, Atlas, Prometheus, Pandora, Janus, and Epimetheus from a fit to 2580 new Cassini Imaging Science Subsystem astrometric observations spanning 2004 February to 2013 August. The observations are provided as machine-readable and Virtual Observatory tables. We estimate G{{M}Atlas} = (0.384 ± 0.001) × 10-3 km3 s-2, a value 13% smaller than the previously published estimate but with an order of magnitude reduction in the uncertainty. We also find G{{M}Prometheus} = (10.677 ± 0.006) × 10-3 km3 s-2, G{{M}Pandora} = (9.133 ± 0.009) × 10-3 km3 s-2, G{{M}Janus} = (126.51 ± 0.03) × 10-3 km3 s-2, and G{{M}Epimetheus} = (35.110 ± 0.009) × 10-3 km3 s-2, consistent with previously published values, but also with significant reductions in uncertainties. We show that Atlas is currently librating in both the 54:53 co-rotation-eccentricity resonance (CER) and the 54:53 inner Lindblad (ILR) resonance with Prometheus, making it the latest example of a coupled CER-ILR system, in common with the Saturnian satellites Anthe, Aegaeon, and Methone, and possibly Neptune's ring arcs. We further demonstrate that Atlas's orbit is chaotic, with a Lyapunov time of ˜10 years, and show that its chaotic behavior is a direct consequence of the coupled resonant interaction with Prometheus, rather than being an indirect effect of the known chaotic interaction between Prometheus and Pandora. We provide an updated analysis of the second-order resonant perturbations involving Prometheus, Pandora, and Epimetheus based on the new observations, showing that these resonant arguments are librating only when Epimetheus is the innermost of the co-orbital pair, Janus and Epimetheus. We also find evidence that the known chaotic changes in the orbits of Prometheus and Pandora are not confined to times of apse anti-alignment.

  8. Effect of Training Class Label Noise on Classification Performances for Land Cover Mapping with Satellite Image Time Series

    Directory of Open Access Journals (Sweden)

    Charlotte Pelletier

    2017-02-01

    Full Text Available Supervised classification systems used for land cover mapping require accurate reference databases. These reference data come generally from different sources such as field measurements, thematic maps, or aerial photographs. Due to misregistration, update delay, or land cover complexity, they may contain class label noise, i.e., a wrong label assignment. This study aims at evaluating the impact of mislabeled training data on classification performances for land cover mapping. Particularly, it addresses the random and systematic label noise problem for the classification of high resolution satellite image time series. Experiments are carried out on synthetic and real datasets with two traditional classifiers: Support Vector Machines (SVM and Random Forests (RF. A synthetic dataset has been designed for this study, simulating vegetation profiles over one year. The real dataset is composed of Landsat-8 and SPOT-4 images acquired during one year in the south of France. The results show that both classifiers are little influenced for low random noise levels up to 25%–30%, but their performances drop down for higher noise levels. Different classification configurations are tested by increasing the number of classes, using different input feature vectors, and changing the number of training instances. Algorithm complexities are also analyzed. The RF classifier achieves high robustness to random and systematic label noise for all the tested configurations; whereas the SVM classifier is more sensitive to the kernel choice and to the input feature vectors. Finally, this work reveals that the cross-validation procedure is impacted by the presence of class label noise.

  9. Pilot Study to Show the Feasibility of High-Resolution Sagittal Ultrasound Imaging of the Temporomandibular Joint.

    Science.gov (United States)

    Katzberg, Richard W; Conway, William F; Ackerman, Susan J; Gonzales, Theresa S; Kheyfits, Valeriy; Cronan, Michael S

    2017-06-01

    To show the feasibility of acquiring high-resolution sagittal ultrasound (US) images of the temporomandibular joint (TMJ). We used commercially available US probes to assess the TMJ via a transoral soft tissue window to acquire sagittal images. Magnetic resonance imaging and clinical correlation were compared with the US findings by the consensus assessment of 2 of the senior investigators. The sample was composed of 10 TMJs (6 participants) with an age range of 34 to 71 years and a male-female ratio of 3:1. The condyle and subcondylar surface were visible in 10 of 10 joints (100%), the disc in 7 of 10 joints (70%), and the pterygoid muscles in 6 of 10 joints (60%). In the 5 joints with magnetic resonance correlation, disc position and configuration were confirmed in all cases. We show the first sagittal transoral sonograms of the TMJ disc and associated joint components. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  10. Dam sediment tracking using spectrometry and Landsat 8 satellite image, Taleghan Basin, Iran.

    Science.gov (United States)

    Afshar, Sirous; Shamsai, Abolfazl; Saghafian, Bahram

    2016-02-01

    Sedimentation in reservoirs, in addition to reducing water storage capacity, causes serious environmental impacts including intensification of river erosion. Detection of sediment origins plays a determining role in control and prevention of sedimentation. Nowadays, with the help of studies on sedimentation and erosion, sediment origins can be detected with high accuracy. This research integrated geographic information system (GIS) and remote sensing (RS) techniques to detect the primary source of sediment to Taleghan Dam in northern Iran. After collecting samples of sediment from the basin outlet, they were divided into two parts. One part was sent to the Mineralogy Laboratory in order to determine the percentage of each mineral in the samples using X-ray. A few were sent to the Spectroscopy Laboratory to determine their spectral signature using the spectrometer. The laboratory test results determined the wavelength of the minerals. In the next step, those spots on the satellite image whose spectral reflectance fell within the spectral signature of the minerals were detected and enhanced by mixture-tuned matched filtering (MTMF) method. These spots were overlapped with the map of geological formations. Accordingly, the origin of the minerals was detected. The greatest proportion of trace minerals was found in sample 4 including 6% of Illite trace mineral, while sample 2 contains only 2% of trace minerals. Accordingly, the origin of the minerals was detected. The obtained results revealed that mudstone, red siltstone, and conglomerate formations, Karaj formation in section Poldokhtar, acidic tuffs, alcanic lavas of Karaj Formation, mudstone and gypsum of upper red formation, and Cambrian dolomites were recognized as the most possible origins of the dam sediments. These formations are vulnerable to erosion and should be conserved so as to substantially prevent the volume of sedimentation in the reservoir.

  11. Classification of textures in satellite image with Gabor filters and a multi layer perceptron with back propagation algorithm obtaining high accuracy

    Directory of Open Access Journals (Sweden)

    Adriano Beluco, Paulo M. Engel, Alexandre Beluco

    2015-01-01

    Full Text Available The classification of images, in many cases, is applied to identify an alphanumeric string, a facial expression or any other characteristic. In the case of satellite images is necessary to classify all the pixels of the image. This article describes a supervised classification method for remote sensing images that integrates the importance of attributes in selecting features with the efficiency of artificial neural networks in the classification process, resulting in high accuracy for real images. The method consists of a texture segmentation based on Gabor filtering followed by an image classification itself with an application of a multi layer artificial neural network with a back propagation algorithm. The method was first applied to a synthetic image, like training, and then applied to a satellite image. Some results of experiments are presented in detail and discussed. The application of the method to the synthetic image resulted in the identification of 89.05% of the pixels of the image, while applying to the satellite image resulted in the identification of 85.15% of the pixels. The result for the satellite image can be considered a result of high accuracy.

  12. GHRSST Level 2P Global Skin Sea Surface Temperature from the Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA Terra satellite (GDS version 1)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Moderate-resolution Imaging Spectroradiometer (MODIS) is a scientific instrument (radiometer) launched by NASA in 1999 on board the Terra satellite platform (a...

  13. GHRSST Level 2P Global Skin Sea Surface Temperature from the Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA Aqua satellite (GDS version 1)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Moderate-resolution Imaging Spectroradiometer (MODIS) is a scientific instrument (radiometer) launched by NASA in 2002 on board the Aqua satellite platform (a...

  14. The application of very high resolution satellite image in urban vegetation cover investigation: a case study of Xiamen City

    Institute of Scientific and Technical Information of China (English)

    CHENGChengqi; LiBin; MATing

    2003-01-01

    With the technological improvements of satellite sensors, we will acquire more information about the earth so that we have reached a new application epoch of observation on earth environmental change and cartography. But with the enhancement of spatial resolution, some questions have arisen in the application of using traditional image processing and classification methods. Aiming for such questions, we studied the application of IKONOS very high resolution image (1 m) in Xiamen City on Urban Vegetation Cover Investigation and discussed the difference between the very high resolution image and traditional low spatial resolution image at classification,information abstraction etc. It is an advantageous test for the large-scale application of very high resolution data in the future.

  15. Design of a nano-satellite demonstrator of an infrared imaging space interferometer: the HyperCube

    Science.gov (United States)

    Dohlen, Kjetil; Vives, Sébastien; Rakotonimbahy, Eddy; Sarkar, Tanmoy; Tasnim Ava, Tanzila; Baccichet, Nicola; Savini, Giorgio; Swinyard, Bruce

    2014-07-01

    The construction of a kilometer-baseline far infrared imaging interferometer is one of the big instrumental challenges for astronomical instrumentation in the coming decades. Recent proposals such as FIRI, SPIRIT, and PFI illustrate both science cases, from exo-planetary science to study of interstellar media and cosmology, and ideas for construction of such instruments, both in space and on the ground. An interesting option for an imaging multi-aperture interferometer with km baseline is the space-based hyper telescope (HT) where a giant, sparsely populated primary mirror is constituted of several free-flying satellites each carrying a mirror segment. All the segments point the same object and direct their part of the pupil towards a common focus where another satellite, containing recombiner optics and a detector unit, is located. In Labeyrie's [1] original HT concept, perfect phasing of all the segments was assumed, allowing snap-shot imaging within a reduced field of view and coronagraphic extinction of the star. However, for a general purpose observatory, image reconstruction using closure phase a posteriori image reconstruction is possible as long as the pupil is fully non-redundant. Such reconstruction allows for much reduced alignment tolerances, since optical path length control is only required to within several tens of wavelengths, rather than within a fraction of a wavelength. In this paper we present preliminary studies for such an instrument and plans for building a miniature version to be flown on a nano satellite. A design for recombiner optics is proposed, including a scheme for exit pupil re-organization, is proposed, indicating the focal plane satellite in the case of a km-baseline interferometer could be contained within a 1m3 unit. Different options for realization of a miniature version are presented, including instruments for solar observations in the visible and the thermal infrared and giant planet observations in the visible, and an

  16. Georectification and snow classification of webcam images: potential for complementing satellite-derrived snow maps over Switzerland

    Science.gov (United States)

    Dizerens, Céline; Hüsler, Fabia; Wunderle, Stefan

    2016-04-01

    The spatial and temporal variability of snow cover has a significant impact on climate and environment and is of great socio-economic importance for the European Alps. Satellite remote sensing data is widely used to study snow cover variability and can provide spatially comprehensive information on snow cover extent. However, cloud cover strongly impedes the surface view and hence limits the number of useful snow observations. Outdoor webcam images not only offer unique potential for complementing satellite-derived snow retrieval under cloudy conditions but could also serve as a reference for improved validation of satellite-based approaches. Thousands of webcams are currently connected to the Internet and deliver freely available images with high temporal and spatial resolutions. To exploit the untapped potential of these webcams, a semi-automatic procedure was developed to generate snow cover maps based on webcam images. We used daily webcam images of the Swiss alpine region to apply, improve, and extend existing approaches dealing with the positioning of photographs within a terrain model, appropriate georectification, and the automatic snow classification of such photographs. In this presentation, we provide an overview of the implemented procedure and demonstrate how our registration approach automatically resolves the orientation of a webcam by using a high-resolution digital elevation model and the webcam's position. This allows snow-classified pixels of webcam images to be related to their real-world coordinates. We present several examples of resulting snow cover maps, which have the same resolution as the digital elevation model and indicate whether each grid cell is snow-covered, snow-free, or not visible from webcams' positions. The procedure is expected to work under almost any weather condition and demonstrates the feasibility of using webcams for the retrieval of high-resolution snow cover information.

  17. Computing procedure of spatial geo-referencing of satellite image; Un procedimiento simple de geo-referenciacion de imagenes de satelite

    Energy Technology Data Exchange (ETDEWEB)

    Santos, J.; Vazquez, M.; Fernandes, F.; Prado, T.; Castro, R.

    2004-07-01

    In this paper a computing procedure of spatial geo-referencing is described that, by means of the terrestrial spatial geometry, permits to obtain the Latitude and Longitude that corresponds to a given pixel of a satellite image, the pixel being defined by a pair Line- Pixel. The procedure also permits to compute the other way round. This procedure is more clear and simple than those proposed by Eumetsat and Goes and can be applied to any satellite image. (Author)

  18. HIGH-CADENCE, HIGH-CONTRAST IMAGING FOR EXOPLANET MAPPING: OBSERVATIONS OF THE HR 8799 PLANETS WITH VLT/SPHERE SATELLITE-SPOT-CORRECTED RELATIVE PHOTOMETRY

    Energy Technology Data Exchange (ETDEWEB)

    Apai, Dániel; Skemer, Andrew; Hanson, Jake R. [Steward Observatory, The University of Arizona, Tucson, AZ 85721 (United States); Kasper, Markus [European Southern Observatory, Garching (Germany); Lagrange, Anne-Marie; Bonnefoy, Mickaël [Université Grenoble Alpes, IPAG, F-38000 Grenoble (France); Biller, Beth A. [Institute for Astronomy, University of Edinburgh, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom); Buenzli, Esther [Max Planck Institute for Astronomy, Königstuhl 17, Heidelberg, D-69117 (Germany); Vigan, Arthur, E-mail: apai@arizona.edu [Aix-Marseille Université, CNRS, Laboratoire d’ Astrophysique de Marseille, UMR 7326, F-13388 Marseille (France)

    2016-03-20

    Time-resolved photometry is an important new probe of the physics of condensate clouds in extrasolar planets and brown dwarfs. Extreme adaptive optics systems can directly image planets, but precise brightness measurements are challenging. We present VLT/SPHERE high-contrast, time-resolved broad H-band near-infrared photometry for four exoplanets in the HR 8799 system, sampling changes from night to night over five nights with relatively short integrations. The photospheres of these four planets are often modeled by patchy clouds and may show large-amplitude rotational brightness modulations. Our observations provide high-quality images of the system. We present a detailed performance analysis of different data analysis approaches to accurately measure the relative brightnesses of the four exoplanets. We explore the information in satellite spots and demonstrate their use as a proxy for image quality. While the brightness variations of the satellite spots are strongly correlated, we also identify a second-order anti-correlation pattern between the different spots. Our study finds that KLIP reduction based on principal components analysis with satellite-spot-modulated artificial-planet-injection-based photometry leads to a significant (∼3×) gain in photometric accuracy over standard aperture-based photometry and reaches 0.1 mag per point accuracy for our data set, the signal-to-noise ratio of which is limited by small field rotation. Relative planet-to-planet photometry can be compared between nights, enabling observations spanning multiple nights to probe variability. Recent high-quality relative H-band photometry of the b–c planet pair agrees to about 1%.

  19. Accuracy comparison of Pléiades satellite ortho-images using GPS ...

    African Journals Online (AJOL)

    Ivan Henrico

    a new and improved dimension to the pointing accuracies of current and future .... It is stated in the TerraSAR-X GCP-3 Coordinate Specification and Accuracy .... parameters for camera timing, alignment, focal plane and satellites altitude.

  20. Northeast Puerto Rico and Culebra Island World View 2 Satellite Mosaic - NOAA TIFF Image

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This GeoTiff is a mosaic of World View 2 panchromatic satellite imagery of Northeast Puerto Rico that contains the shallow water area (0-35m deep) surrounding...

  1. Automated dust storm detection using satellite images. Development of a computer system for the detection of dust storms from MODIS satellite images and the creation of a new dust storm database

    Science.gov (United States)

    El-Ossta, Esam Elmehde Amar

    Dust storms are one of the natural hazards, which have increased in frequency in the recent years over Sahara desert, Australia, the Arabian Desert, Turkmenistan and northern China, which have worsened during the last decade. Dust storms increase air pollution, impact on urban areas and farms as well as affecting ground and air traffic. They cause damage to human health, reduce the temperature, cause damage to communication facilities, reduce visibility which delays both road and air traffic and impact on both urban and rural areas. Thus, it is important to know the causation, movement and radiation effects of dust storms. The monitoring and forecasting of dust storms is increasing in order to help governments reduce the negative impact of these storms. Satellite remote sensing is the most common method but its use over sandy ground is still limited as the two share similar characteristics. However, satellite remote sensing using true-colour images or estimates of aerosol optical thickness (AOT) and algorithms such as the deep blue algorithm have limitations for identifying dust storms. Many researchers have studied the detection of dust storms during daytime in a number of different regions of the world including China, Australia, America, and North Africa using a variety of satellite data but fewer studies have focused on detecting dust storms at night. The key elements of this present study are to use data from the Moderate Resolution Imaging Spectroradiometers on the Terra and Aqua satellites to develop more effective automated method for detecting dust storms during both day and night and generate a MODIS dust storm database..

  2. Ten Years of Land Cover Change on the California Coast Detected using Landsat Satellite Image Analysis

    Science.gov (United States)

    Potter, Christopher S.

    2013-01-01

    Landsat satellite imagery was analyzed to generate a detailed record of 10 years of vegetation disturbance and regrowth for Pacific coastal areas of Marin and San Francisco Counties. The Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) methodology, a transformation of Tasseled-Cap data space, was applied to detected changes in perennial coastal shrubland, woodland, and forest cover from 1999 to 2009. Results showed several principal points of interest, within which extensive contiguous areas of similar LEDAPS vegetation change (either disturbed or restored) were detected. Regrowth areas were delineated as burned forest areas in the Point Reyes National Seashore (PRNS) from the 1995 Vision Fire. LEDAPS-detected disturbance patterns on Inverness Ridge, PRNS in areas observed with dieback of tanoak and bay laurel trees was consistent with defoliation by sudden oak death (Phytophthora ramorum). LEDAPS regrowth pixels were detected over much of the predominantly grassland/herbaceous cover of the Olema Valley ranchland near PRNS. Extensive restoration of perennial vegetation cover on Crissy Field, Baker Beach and Lobos Creek dunes in San Francisco was identified. Based on these examples, the LEDAPS methodology will be capable of fulfilling much of the need for continual, low-cost monitoring of emerging changes to coastal ecosystems.

  3. Saturn's inner satellites : orbits, masses and the chaotic motion of Atlas from new Cassini imaging observations

    CERN Document Server

    Cooper, N J; Murray, C D; Evans, M W

    2014-01-01

    We present numerically-derived orbits and mass estimates for the inner Saturnian satellites, Atlas, Prometheus, Pandora, Janus and Epimetheus from a fit to 2580 new Cassini ISS astrometric observations spanning February 2004 to August 2013. The observations are provided in a supplementary table. We estimate GM_ Atlas=0.384+/-0.001 x 10^(-3)km^3s^(-2), a value 13% smaller than the previously published estimate but with an order of magnitude reduction in the uncertainty. We also find GM_ Prometheus=10.677+/-0.006x10(-3)km^3s^(-2), GM_Pandora=9.133+/-0.009x10^(-3)km^3s^(-2), GM_Janus=126.51+/-0.03x10^(-3)km^3s^(-2) and GM_Epimetheus=35.110+/-0.009x10^(-3)km^3s^(-2), consistent with previously published values, but also with significant reductions in uncertainties. We show that Atlas is currently librating in both the 54:53 co-rotation-eccentricity resonance (CER) and the 54:53 inner Lindblad (ILR) resonance with Prometheus, making it the latest example of a coupled CER-ILR system, in common with the Saturnian sa...

  4. THE COMPILATION OF A DTM AND A NEW SATELLITE IMAGE MAP FOR KING GEORGE ISLAND,ANTARCTICA

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An improved topographic database for King George Island,one of the most frequently visited regions in Antarctica,is presented.A first step consisted in combining data from differential GPS surveys gained during the austral summers 1997~1998 and 1999~2000,with the current coastline from a SPOT satellite image mosaic,topographic information from existing maps and from the Antarctic Digital Database.From this data sets,a digital terrain model (DTM) was generated using Arc/Info GIS.In a second step,a satellite image map at the scale 1∶100 000 was assembled from contour lines derived from the DTM and the satellite mosaic.A lack of accurate topographic information in the eastern part of the island was identified.Additional topographic surveying or SAR interferometry should be used to improve the data quality in that area.The GIS integrated database will be indispensable for glaciological and climatological studies and administrative and scientific purposes.In future,the application of GIS techniques will be mandatory for environmental impact studies and environmental monitoring as well as for management plans on King George Island.

  5. Exploration of mineral resource deposits based on analysis of aerial and satellite image data employing artificial intelligence methods

    Science.gov (United States)

    Osipov, Gennady

    2013-04-01

    We propose a solution to the problem of exploration of various mineral resource deposits, determination of their forms / classification of types (oil, gas, minerals, gold, etc.) with the help of satellite photography of the region of interest. Images received from satellite are processed and analyzed to reveal the presence of specific signs of deposits of various minerals. Course of data processing and making forecast can be divided into some stages: Pre-processing of images. Normalization of color and luminosity characteristics, determination of the necessary contrast level and integration of a great number of separate photos into a single map of the region are performed. Construction of semantic map image. Recognition of bitmapped image and allocation of objects and primitives known to system are realized. Intelligent analysis. At this stage acquired information is analyzed with the help of a knowledge base, which contain so-called "attention landscapes" of experts. Used methods of recognition and identification of images: a) combined method of image recognition, b)semantic analysis of posterized images, c) reconstruction of three-dimensional objects from bitmapped images, d)cognitive technology of processing and interpretation of images. This stage is fundamentally new and it distinguishes suggested technology from all others. Automatic registration of allocation of experts` attention - registration of so-called "attention landscape" of experts - is the base of the technology. Landscapes of attention are, essentially, highly effective filters that cut off unnecessary information and emphasize exactly the factors used by an expert for making a decision. The technology based on denoted principles involves the next stages, which are implemented in corresponding program agents. Training mode -> Creation of base of ophthalmologic images (OI) -> Processing and making generalized OI (GOI) -> Mode of recognition and interpretation of unknown images. Training mode

  6. A new tool for supervised classification of satellite images available on web servers: Google Maps as a case study

    Science.gov (United States)

    García-Flores, Agustín.; Paz-Gallardo, Abel; Plaza, Antonio; Li, Jun

    2016-10-01

    This paper describes a new web platform dedicated to the classification of satellite images called Hypergim. The current implementation of this platform enables users to perform classification of satellite images from any part of the world thanks to the worldwide maps provided by Google Maps. To perform this classification, Hypergim uses unsupervised algorithms like Isodata and K-means. Here, we present an extension of the original platform in which we adapt Hypergim in order to use supervised algorithms to improve the classification results. This involves a significant modification of the user interface, providing the user with a way to obtain samples of classes present in the images to use in the training phase of the classification process. Another main goal of this development is to improve the runtime of the image classification process. To achieve this goal, we use a parallel implementation of the Random Forest classification algorithm. This implementation is a modification of the well-known CURFIL software package. The use of this type of algorithms to perform image classification is widespread today thanks to its precision and ease of training. The actual implementation of Random Forest was developed using CUDA platform, which enables us to exploit the potential of several models of NVIDIA graphics processing units using them to execute general purpose computing tasks as image classification algorithms. As well as CUDA, we use other parallel libraries as Intel Boost, taking advantage of the multithreading capabilities of modern CPUs. To ensure the best possible results, the platform is deployed in a cluster of commodity graphics processing units (GPUs), so that multiple users can use the tool in a concurrent way. The experimental results indicate that this new algorithm widely outperform the previous unsupervised algorithms implemented in Hypergim, both in runtime as well as precision of the actual classification of the images.

  7. Study of time-lapse processing for dynamic hydrologic conditions. [electronic satellite image analysis console for Earth Resources Technology Satellites imagery

    Science.gov (United States)

    Serebreny, S. M.; Evans, W. E.; Wiegman, E. J.

    1974-01-01

    The usefulness of dynamic display techniques in exploiting the repetitive nature of ERTS imagery was investigated. A specially designed Electronic Satellite Image Analysis Console (ESIAC) was developed and employed to process data for seven ERTS principal investigators studying dynamic hydrological conditions for diverse applications. These applications include measurement of snowfield extent and sediment plumes from estuary discharge, Playa Lake inventory, and monitoring of phreatophyte and other vegetation changes. The ESIAC provides facilities for storing registered image sequences in a magnetic video disc memory for subsequent recall, enhancement, and animated display in monochrome or color. The most unique feature of the system is the capability to time lapse the imagery and analytic displays of the imagery. Data products included quantitative measurements of distances and areas, binary thematic maps based on monospectral or multispectral decisions, radiance profiles, and movie loops. Applications of animation for uses other than creating time-lapse sequences are identified. Input to the ESIAC can be either digital or via photographic transparencies.

  8. In search of greener pastures: Using satellite images to predict the effects of environmental change on zebra migration

    Science.gov (United States)

    Bartlam-Brooks, Hattie L. A.; Beck, Pieter S. A.; Bohrer, Gil; Harris, Stephen

    2013-12-01

    ungulate migrations occurred in most grassland and boreal woodland ecosystems, but many have been lost due to increasing habitat loss and fragmentation. With the rate of environmental change increasing, identifying and prioritizing migration routes for conservation has taken on a new urgency. Understanding the cues that drive long-distance animal movements is critical to predicting the fate of migrations under different environmental change scenarios and how large migratory herbivores will respond to increasing resource heterogeneity and anthropogenic influences. We used an individual-based modeling approach to investigate the influence of environmental conditions, monitored using satellite data, on departure date and movement speed of migrating zebras in Botswana. Daily zebra movements between dry and rainy season ranges were annotated with coincident observations of precipitation from the Tropical Rainfall Measuring Mission data set and Moderate Resolution Imaging Spectroradiometer-derived normalized difference vegetation index (NDVI). An array of increasingly complex movement models representing alternative hypotheses regarding the environmental cues and controls for movement was parameterized and tested. The best and most justified model predicted daily zebra movement as two linear functions of precipitation rate and NDVI and included a modeled departure date as a function of cumulative precipitation. The model was highly successful at replicating both the timing and pace of seven actual migrations observed using GPS telemetry (R2 = 0.914). It shows how zebras rapidly adjust their movement to changing environmental conditions during migration and are able to reverse migration to avoid adverse conditions or exploit renewed resource availability, a nomadic behavior which should lend them a degree of resilience to climate and environmental change. Our results demonstrate how competing individual-based migration models, informed by freely available satellite data

  9. Image of Fomalhaut Dust Ring at 350 Microns: The Relative Column Density Map Shows Pericenter-Apocenter Asymmetry

    Science.gov (United States)

    Marsh, K. A.; Velusamy, T.; Dowell, C. D.; Grogan, K.; Beichman, C. A.

    2005-01-01

    We have imaged the circumstellar disk of Fomalhaut at 350 mm wavelength, using SHARC II (Submillimeter High Angular Resolution Camera II) at the Caltech Submillimeter Observatory. The spatial resolution of the raw images (9") has been enhanced by a factor of 3 using the HiRes deconvolution procedure. We find that at this wavelength and signal-to-noise ratio (approx.12), the observed morphology is that of a simple inclined ring (i approx. 70 deg), with little or no other apparent structure--this is the first observation that shows clearly the ring morphology of the disk. We have combined our 350 mm data with Spitzer Space Telescope images at 24, 70, and 160 mm in order to estimate the two-dimensional spatial variation of relative column density ("tau map") using our DISKFIT procedure. The tau map is based on the following physical assumptions: (1) the wavelength variation of opacity is the same throughout the disk, (2) the radial variation of dust temperature is dictated by the energy balance of individual grains in the stellar radiation field, and (3) the vertical scale height of the disk follows a power-law radial variation. The results confirm the ringlike morphology but also show that the geometric center is displaced from the star by about 8 AU and that the ring has an apocentric enhancement of approximately 14% in integrated column density. If we interpret the displacement in terms of elliptical orbital motion due to gravitational perturbation by an unseen planet, then the implied forced eccentricity is 0.06; dynamical modeling then predicts an apocentric density enhancement consistent with that inferred from the tau map.

  10. Introduction of the in-orbit test and its performance for the first meteorological imager of the Communication, Ocean, and Meteorological Satellite

    Science.gov (United States)

    Kim, D. H.; Ahn, M. H.

    2014-08-01

    The first geostationary Earth observation satellite of Korea - the Communication, Ocean, and Meteorological Satellite (COMS) - was successfully launched on 27 June 2010. After arrival at its operational orbit, the satellite underwent an in-orbit test (IOT) that lasted for about 8 months. During the IOT period, the main payload for the weather application, the meteorological imager, went through successful tests for demonstrating its function and performance, and the test results are introduced here. The radiometric performance of the meteorological imager (MI) is tested by means of signal-to-noise ratio (SNR) for the visible channel, noise-equivalent differential temperature (NEdT) for the infrared channels, and pixel-to-pixel nonuniformity for both the visible and infrared channels. In the case of the visible channel, the SNR of all eight detectors is obtained using the ground-measured parameters with the background signals obtained in orbit. The overall performance shows a value larger than 26 at 5% albedo, exceeding the user requirement of 10 by a significant margin. Also, the relative variability of detector responsivity among the eight visible channels meets the user requirement, showing values within 10% of the user requirement. For the infrared channels, the NEdT of each detector is well within the user requirement and is comparable with or better than the legacy instruments, except for the water vapor channel, which is slightly noisier than the legacy instruments. The variability of detector responsivity of infrared channels is also below the user requirement, within 40% of the requirement, except for the shortwave infrared channel. The improved performance result is partly due to the stable and low detector temperature obtained due to spacecraft design, i.e., by installing a single solar panel on the opposite side of the MI.

  11. Comparison between CNA and energetic electron precipitation: simultaneous observation by Poker Flat Imaging Riometer and NOAA satellite

    Directory of Open Access Journals (Sweden)

    Y.-M. Tanaka

    2005-07-01

    Full Text Available The cosmic noise absorption (CNA is compared with the precipitating electron flux for 19 events observed in the morning sector, using the high-resolution data obtained during the conjugate observations with the imaging riometer at Poker Flat Research Range (PFRR; 65.11° N, 147.42° W, Alaska, and the low-altitude satellite, NOAA 12. We estimate the CNA, using the precipitating electron flux measured by NOAA 12, based on a theoretical model assuming an isotropic pitch angle distribution, and quantitatively compare them with the observed CNA. Focusing on the eight events with a range of variation larger than 0.4dB, three events show high correlation between the observed and estimated CNA (correlation coefficient (r0>0.7 and five events show low correlation (r0<0.5. The estimated CNA is often smaller than the observed CNA (72% of all data for 19 events, which appears to be the main reason for the low-correlation events. We examine the assumption of isotropic pitch angle distribution by using the trapped electron flux measured at 80° zenith angle. It is shown that the CNA estimated from the trapped electron flux, assuming an isotropic pitch angle distribution, is highly correlated with the observed CNA and is often overestimated (87% of all data. The underestimate (overestimate of CNA derived from the precipitating (trapped electron flux can be interpreted in terms of the anisotropic pitch angle distribution similar to the loss cone distribution. These results indicate that the CNA observed with the riometer may be quantitatively explained with a model based on energetic electron precipitation, provided that the pitch angle distribution and the loss cone angle of the electrons are taken into account.

    Keywords. Energetic particles, precipitating – Energetic particles, trapped – Ionosphere-magnetosphere interactions

  12. Evaluation of the Seasonal and Spatial Lake Level Change Using by Worldview-2 Satellite Images in the Egirdir Lake (Turkey)

    Science.gov (United States)

    Sener, Erhan; Sener, Sehnaz; Uysal, Rahmi; Bulut, Cafer

    2016-08-01

    Eğirdir Lake is located in the Lake District, it is fourth largest lake and the second largest freshwater lake in Turkey. The lake is still drinking water sources in many residential areas. In this study two Worldview-2 satellite imagery which is high resolution 8-band has been used. The imagery covering the whole lake and belongs to date 10.05.2010 and 24.10.2010. Using Coastal Band (1.Band), Blue (2.Band), Green (3.Band), Yellow (4.Band) and Red (5.Band) on that satellite, seasonal water level in the rainy and dry periods in the selected pilot areas of the Eğirdir Lake has been aimed to determine. In this context, firstly Atmospheric Correction is applied to reduce their atmospheric effects. In order to mask of surface water The Normalized Water Different Index (NWDI) has been applied. Then seasonally varying fields has been identified with change analysis applied to two different image.

  13. Tracking four-decade inundation changes with multi-temporal satellite images in China's largest freshwater lake

    Science.gov (United States)

    Wu, Guiping

    2017-04-01

    Poyang Lake is the largest freshwater lake in China. The lake has undergone remarkable spatio-temporal changes in both short- and long-term scales since 1970s, resulting in significant hydrological, ecological and economic consequences. Remote sensing techniques have advantages for large-scale studies, by offering images at different spatial and spectral resolutions. However, due to technical difficulties, no single satellite sensor can meet the needs for high spatio-temporal resolution required for such monitoring. In this study, using Landsat Thematic Mapper (TM) and Moderate Resolution Imaging Spectroradiometer (MODIS) images collected between 1973 and 2012, we documented and investigated the short- and long-term characteristics of lake inundation based on Normalized Difference Water Index (NDWI). First, we presented a novel downscaling method based on the NDWI statistical regression algorithm to generate small-scale resolution inundation map (30m) from coarse MODIS data (500m). The downscaling is a linear calibration of the NDWI index from MODIS imagery to Landsat imagery, which is based on the assumption that the relationships between fine resolution and coarse resolution are invariable. Second, Tupu analysis method was further performed to explore the spatial-temporal distribution and changing processes of lake inundation based on downscaling inundation maps. Then, a defined water variation rate (WVR) and inundation frequency (IF) indicator was used to reveal seasonal water surface submersion/exposure processes of lake expansion and shrinkage in different zones. Finally, mathematical statistics methods were utilized to explore the possible driving mechanisms of the revealed change patterns with meteorological data and hydrological data. The results show that, there is a high correlation (mean absolute error of 3.95% and an R2 of 0.97) between the MODIS- and Landsat-derived water surface areas in Poyang Lake. Over the past 40 years, a declining trend to a

  14. Digital mapping of loess in Northwest Germany based on satellite images

    Science.gov (United States)

    Wagner, Bianca

    2010-05-01

    Loess maps of various scales are important input data for advanced investigations of spatial loess properties such as variation in grain size, thickness and facies or study of loess provenance. Many representations of loess distribution in Northwest Germany are based on geological maps. Mostly these maps were created at the beginning of the last century. During this time especially thin loess covers were not incorporated in favour of underlying hard rocks or other Quaternary deposits. Due to the change in mapping policy at the end of the last century much more of the unconsolidated rocks, particularly with regard to loess, were displayed on the revised or updated maps. In this study the analysis of optical remote sensing data, ranging from visible light to the infrared, was tested to create a more realistic map of the loess distribution in Northwest Germany. The investigation area includes the loess along the northern loess boundary between Helmstedt and Minden and extends to Kassel and Goettingen in the South. Here, in southern Lower Saxony, northern Hesse and eastern North Rhine-Westphalia, loess and loess derivates are widely distributed apart from river beds, valley flanks, steep slopes and higher mountain ranges. The thickness of the loess cover, that is of Weichselian, sporadic of Saalian or Elsterian age, varies between few centimetres and about 20 m. The hard rocks of the study area were influenced by tectonic and halokinetic processes resulting in a complex and small-scale pattern of folds, depressions, horsts and grabens. Satellite images of the Landsat TM and ETM+ sensors, recorded between 1985 and 2008, were used for this study. After radiometric calibration and atmospheric and geometric correction of every dataset, coniferous forest, water and areas of high urbanization were masked. Then a synthetic file was made up of all remaining pixels, preferring the pixel, displaying the purest soil or bare rock. Various digital mapping techniques e.g. band

  15. Satellite images and geodetic measurements applied to the monitoring of the Horcones Inferior Glacier, Mendoza, Argentina

    Directory of Open Access Journals (Sweden)

    M. Gabriela Lenzano

    2011-06-01

    Full Text Available This work analyzes the monitoring of the covered and regenerated Horcones Inferior Glacier (HIG since the implementation of a semi-permanent GNSS station (HISS on its surface during the summer seasons of 2009 and 2010. The glacier is located at 32° 41's and 69° 57'w, at the foot of the south wall of Mt. Aconcagua, Aconcagua Provincial Park, Mendoza, Argentina. The average velocities obtained from the HISS station were of 1.3 cm/d and 3.5 cm/d during the 2009 and 2010 seasons respectively. The data procured using satellite images during the last surges (1984 and 2003 gave average velocities for the HIG front of 8.7 m/d for the first event and 11.5 m/d for the second one. These results allowed getting accurate and reliable movement tendency at the terminal part of the HIG during the 1984-2010 period.El presente trabajo realiza el monitoreo del glaciar Horcones Inferior, cubierto y regenerado a partir de la implementación de una estación GNSS semi-permanente (HISS, instalada sobre su superficie durante las temporadas de verano de 2009 y 2010 respectivamente. El glaciar se encuentra ubicado a los 32° 41's y 69° 57'w, al pie de la pared sur del C° Aconcagua, en el Parque Provincial Aconcagua, Mendoza, Argentina. La estación HISS registró valores de velocidades medias de 1.3 cm/d y 3.5 cm/d durante las temporadas de 2009 y 2010. Se utilizaron imágenes satelitales para el seguimiento del frente del glaciar durante los últimos surges (1984 y 2003, cuyas velocidades medias fueron de 8.7 m/d para el primero y de 11.5 m/d para el segundo evento. Estos resultados permitieron obtener de manera precisa y confiable la tendencia de movimiento de la parte terminal del GHI durante el periodo 1984-2010.

  16. Monitoring urban impervious surface area change using China-Brazil Earth Resources Satellites and HJ-1 remote sensing images

    Science.gov (United States)

    Du, Peijun; Xia, Junshi; Feng, Li

    2015-01-01

    Impervious surface area (ISA) plays an important role in monitoring urbanization and related environmental changes, and has become a hotspot in urban and environmental studies. Xuzhou City, located in northwest Jiangsu Province, China, is chosen as the study area, and two scenes of China-Brazil Earth Resources Satellites images and one scene of HJ-1 image are employed to estimate ISA percentage and analyze the change trend from 2001 to 2009. Using a linear spectral mixture model (LSMM) and nonlinear backpropagation neural network (BPNN) method, all pixels are decomposed to derive four fraction images representing the abundance of four endmembers: vegetation, high-albedo objects, low-albedo objects, and soil. The ISA percentage is then derived by the combination of high- and low-albedo fraction images after removing the influence of water. Some high spatial resolution images are selected to validate the ISA estimation results, and the experimental results indicate that the accuracy of BPNN is higher than LSMM. By comparing the urban ISA abundances derived by BPNN from three dates, it is found that the ISA of Xuzhou City has increased rapidly from 2001 to 2009, especially in the northeast and southeast regions, corresponding to the urban planning scheme and fast urbanization. Compared to other medium remote sensing images, the revisit cycle of HJ-1 multispectral image is only two days, demonstrating the potential of such data for ISA extraction in urbanization, disaster, and other related applications.

  17. Satellite images of the September 2013 flood event in Lyons, Colorado

    Science.gov (United States)

    Cole, Christopher J.; Friesen, Beverly A.; Wilds, Stanley; Noble, Suzanne; Warner, Harumi; Wilson, Earl M.

    2013-01-01

    The U.S. Geological Survey (USGS) Special Applications Science Center (SASC) produced an image base map showing high-resolution remotely sensed data over Lyons, Colorado—a city that was severely affected by the flood event that occurred throughout much of the Colorado Front Range in September of 2013. The 0.5-meter WorldView-2 data products were created from imagery collected by DigitalGlobe on September 13 and September 24, 2013, during and following the flood event. The images shown on this map were created to support flood response efforts, specifically for use in determining damage assessment and mitigation decisions. The raw, unprocessed imagery were orthorectified and pan-sharpened to enhance mapping accuracy and spatial resolution, and reproduced onto a cartographic base map. These maps are intended to provide a snapshot representation of post-flood ground conditions, which may be useful to decisionmakers and the general public. The SASC also provided data processing and analysis support for other Colorado flood-affected areas by creating cartographic products, geo-corrected electro-optical and radar image mosaics, and GIS water cover files for use by the Colorado National Guard, the National Park Service, the U.S. Forest Service, and the flood response community. All products for this International Charter event were uploaded to the USGS Hazards Data Distribution System (HDDS) website (http://hdds.usgs.gov/hdds2/) for distribution.

  18. Research on impervious surface dynamic changes based on Landsat satellite images in Nantong, China

    Science.gov (United States)

    Lu, Xiu; Li, Jia; Duan, Ping; Wang, Jinliang; Zhang, Chi

    2016-10-01

    In this paper, the decision tree classification based on the CART algorithm (Classification and Regression Tree) is used to extract the impervious surface area of Nantong city in Jiangsu Province in China. Impervious surface dynamic change nearly 25 years in Nantong city is researched using four periods Landsat images of 1990, 2003, 2008, and 2014. The results show that the classification precision based on the CART algorithm is higher, which can more accurately extract the impervious surface. During the 25 years, the trend of the impervious surface of Nantong is increased year by year. Urban construction and expansion is one of the driving forces of the impervious surface increase.

  19. Monitoring agricultural crop growth: comparison of high spatial-temporal satellite imagery versus UAV-based imaging spectrometer time series measurements

    Science.gov (United States)

    Mucher, Sander; Roerink, Gerbert; Franke, Jappe; Suomalainen, Juha; Kooistra, Lammert

    2014-05-01

    providers are involved in the consortium. First results show that the Greenmonitor is much more suitable for comparison in growth between fields at regional scale, while UAV based imagery is much more suitable for mapping variation in crop biochemistry (i.e., chlorophyll, nitrogen) within the fields, which requires in the Netherlands a spatial resolution of a few meters. Finally, the spatial and spectral dimension of satellite and UAV derived vegetation indices (i.e., weighted difference vegetation index, chlorophyll red-edge index) to evaluate to which extent UAV based image acquisition could be adopted to complement missing data in satellite time-series.

  20. PB@Au Core-Satellite Multifunctional Nanotheranostics for Magnetic Resonance and Computed Tomography Imaging in Vivo and Synergetic Photothermal and Radiosensitive Therapy.

    Science.gov (United States)

    Dou, Yan; Li, Xue; Yang, Weitao; Guo, Yanyan; Wu, Menglin; Liu, Yajuan; Li, Xiaodong; Zhang, Xuening; Chang, Jin

    2017-01-18

    To integrate multiple diagnostic and therapeutic strategies on a single particle through simple and effective methods is still challenging for nanotheranostics. Herein, we develop multifunctional nanotheranostic PB@Au core-satellite nanoparticles (CSNPs) based on Prussian blue nanoparticles (PBNPs) and gold nanoparticles (AuNPs), which are two kinds of intrinsic theranostic nanomaterials, for magnetic resonance (MR)-computed tomography (CT) imaging and synergistic photothermal and radiosensitive therapy (PTT-RT). PBNPs as cores enable T1- and T2-weighted MR contrast and strong photothermal effect, while AuNPs as satellites offer CT enhancement and radiosensitization. As revealed by both MR and CT imaging, CSNPs realized efficient tumor localization by passively targeted accumulation after intravenous injection. In vivo studies showed that CSNPs resulted in synergistic PTT-RT action to achieve almost entirely suppression of tumor growth without observable recurrence. Moreover, no obvious systemic toxicity of mice confirmed good biocompatibility of CSNPs. These results raise new possibilities for clinical nanotheranostics with multimodal diagnostic and therapeutic coalescent design.

  1. A national system for monitoring the population of agricultural pests using an integrated approach of remote sensing data from in situ automated traps and satellite images

    Science.gov (United States)

    Diofantos, Hadjimitsis G.; Panayiotis, Philimis; Elias, Psimolophitis; Georgiou, George K.; Kyriacos, Themistocleous

    2010-10-01

    A national system for monitoring the population increase of agricultural pest "Lobesia Botrana" (vine moth/fly that attacks grapes) in Cyprus has been developed. The system comprises of automated delta traps with GPS that use wireless(Wi-Fi) camera, automated image analysis for identification of the specific fly species, Wi-Fi technology for transferring the data using mobile telephony network to a central station for result presentation and analysis. A GIS database was developed and included details of the pilot vineyards, environmental conditions and daily data of the number of captured flies from each automated trap. The results were compared with MODIS and LANDSAT satellite thermal images since the appearance of the vine fly is greatly dependent on the microclimate temperatures (degree days). Results showed that satellite data can estimate accurately the appearance of the vine fly. The proposed system can be an important tool for the improvement of a national Integrated Pest Management (IPM) system and it can also be used for monitoring other agricultural pests and insects.

  2. Estimating babassu palm density using automatic palm tree detection with very high spatial resolution satellite images.

    Science.gov (United States)

    Dos Santos, Alessio Moreira; Mitja, Danielle; Delaître, Eric; Demagistri, Laurent; de Souza Miranda, Izildinha; Libourel, Thérèse; Petit, Michel

    2017-05-15

    High spatial resolution images as well as image processing and object detection algorithms are recent technologies that aid the study of biodiversity and commercial plantations of forest species. This paper seeks to contribute knowledge regarding the use of these technologies by studying randomly dispersed native palm tree. Here, we analyze the automatic detection of large circular crown (LCC) palm tree using a high spatial resolution panchromatic GeoEye image (0.50 m) taken on the area of a community of small agricultural farms in the Brazilian Amazon. We also propose auxiliary methods to estimate the density of the LCC palm tree Attalea speciosa (babassu) based on the detection results. We used the "Compt-palm" algorithm based on the detection of palm tree shadows in open areas via mathematical morphology techniques and the spatial information was validated using field methods (i.e. structural census and georeferencing). The algorithm recognized individuals in life stages 5 and 6, and the extraction percentage, branching factor and quality percentage factors were used to evaluate its performance. A principal components analysis showed that the structure of the studied species differs from other species. Approximately 96% of the babassu individuals in stage 6 were detected. These individuals had significantly smaller stipes than the undetected ones. In turn, 60% of the stage 5 babassu individuals were detected, showing significantly a different total height and a different number of leaves from the undetected ones. Our calculations regarding resource availability indicate that 6870 ha contained 25,015 adult babassu palm tree, with an annual potential productivity of 27.4 t of almond oil. The detection of LCC palm tree and the implementation of auxiliary field methods to estimate babassu density is an important first step to monitor this industry resource that is extremely important to the Brazilian economy and thousands of families over a large scale.

  3. Analysis of multi-temporal landsat satellite images for monitoring land surface temperature of municipal solid waste disposal sites.

    Science.gov (United States)

    Yan, Wai Yeung; Mahendrarajah, Prathees; Shaker, Ahmed; Faisal, Kamil; Luong, Robin; Al-Ahmad, Mohamed

    2014-12-01

    This studypresents a remote sensing application of using time series Landsat satellite images for monitoring the Trail Road and Nepean municipal solid waste (MSW) disposal sites in Ottawa, Ontario, Canada. Currently, the Trail Road landfill is in operation; however, during the 1960s and 1980s, the city relied heavily on the Nepean landfill. More than 400 Landsat satellite images were acquired from the US Geological Survey (USGS) data archive between 1984 and 2011. Atmospheric correction was conducted on the Landsat images in order to derive the landfill sites' land surface temperature (LST). The findings unveil that the average LST of the landfill was always higher than the immediate surrounding vegetation and air temperature by 4 to 10 °C and 5 to 11.5 °C, respectively. During the summer, higher differences of LST between the landfill and its immediate surrounding vegetation were apparent, while minima were mostly found in fall. Furthermore, there was no significant temperature difference between the Nepean landfill (closed) and the Trail Road landfill (active) from 1984 to 2007. Nevertheless, the LST of the Trail Road landfill was much higher than the Nepean by 15 to 20 °C after 2007. This is mainly due to the construction and dumping activities (which were found to be active within the past few years) associated with the expansion of the Trail Road landfill. The study demonstrates that the use of the Landsat data archive can provide additional and viable information for the aid of MSW disposal site monitoring.

  4. Urban Land Cover Change Modelling Using Time-Series Satellite Images: A Case Study of Urban Growth in Five Cities of Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Abdullah F. Alqurashi

    2016-10-01

    Full Text Available This study analyses the expansion of urban growth and land cover changes in five Saudi Arabian cities (Riyadh, Jeddah, Makkah, Al-Taif and the Eastern Area using Landsat images for the 1985, 1990, 2000, 2007 and 2014 time periods. The classification was carried out using object-based image analysis (OBIA to create land cover maps. The classified images were used to predict the land cover changes and urban growth for 2024 and 2034. The simulation model integrated the Markov chain (MC and Cellular Automata (CA modelling methods and the simulated maps were compared and validated to the reference maps. The simulation results indicated high accuracy of the MC–CA integrated models. The total agreement between the simulated and the reference maps was >92% for all the simulation years. The results indicated that all five cities showed a massive urban growth between 1985 and 2014 and the predicted results showed that urban expansion is likely to continue going for 2024 and 2034 periods. The transition probabilities of land cover, such as vegetation and water, are most likely to be urban areas, first through conversion to bare soil and then to urban land use. Integrating of time-series satellite images and the MC–CA models provides a better understanding of the past, current and future patterns of land cover changes and urban growth in this region. Simulation of urban growth will help planners to develop sustainable expansion policies that may reduce the future environmental impacts.

  5. Monitoring of the Spatial Distribution and Temporal Dynamics of the Green Vegetation Fraction of Croplands in Southwest Germany Using High-Resolution RapidEye Satellite Images

    Science.gov (United States)

    Imukova, Kristina; Ingwersen, Joachim; Streck, Thilo

    2014-05-01

    The green vegetation fraction (GVF) is a key input variable to the evapotranspiration scheme applied in the widely used NOAH land surface model (LSM). In standard applications of the NOAH LSM, the GVF is taken from a global map with a 15 km×15 km resolution. The central objective of the present study was (a) to derive gridded GVF data in a high spatial and temporal resolution from RapidEye images for a region in Southwest Germany, and (b) to improve the representation of the GVF dynamics of croplands in the NOAH LSM for a better simulation of water and energy exchange between land surface and atmosphere. For the region under study we obtained monthly RapidEye satellite images with a resolution 5 m×5 m by the German Aerospace Center (DLR). The images hold five spectral bands: blue, green, red, red-edge and near infrared (NIR). The GVF dynamics were determined based on the Normalized Difference Vegetation Index (NDVI) calculated from the red and near-infrared bands of the satellite images. The satellite GVF data were calibrated and validated against ground truth measurements. Digital colour photographs above the canopy were taken with a boom-mounted digital camera at fifteen permanently marked plots (1 m×1 m). Crops under study were winter wheat, winter rape and silage maize. The GVF was computed based on the red and the green band of the photographs according to Rundquist's method (2002). Based on the obtained calibration scheme GVF maps were derived in a monthly resolution for the region. Our results confirm a linear relationship between GVF and NDVI and demonstrate that it is possible to determine the GVF of croplands from RapidEye images based on a simple two end-member mixing model. Our data highlight the high variability of the GVF in time and space. At the field scale, the GVF was normally distributed with a coefficient of variation of about 32%. Variability was mainly caused by soil heterogeneities and management differences. At the regional scale the GVF

  6. Methodology for the detection of land cover changes in time series of daily satellite images. Application to burned area detection

    Directory of Open Access Journals (Sweden)

    J.A. Moreno-Ruiz

    2014-12-01

    Full Text Available We have developed a methodology for detection of observable phenomena at pixel level over time series of daily satellite images, based on using a Bayesian classifier. This methodology has been applied successfully to detect burned areas in the North American boreal forests using the LTDR dataset. The LTDR dataset represents the longest time series of global daily satellite images with 0.05° (~5 km of spatial resolution. The proposed methodology has several stages: 1 pre-processing daily images to obtain composite images of n days; 2 building of space of statistical variables or attributes to consider; 3 designing an algorithm, by selecting and filtering the training cases; 4 obtaining probability maps related to the considered thematic classes; 5 post-processing to improve the results obtained by applying multiple techniques (filters, ranges, spatial coherence, etc.. The generated results are analyzed using accuracy metrics derived from the error matrix (commission and omission errors, percentage of estimation and using scattering plots against reference data (correlation coefficient and slope of the regression line. The quality of the results obtained improves, in terms of spatial and timing accuracy, to other burned area products that use images of higher spatial resolution (500 m and 1 km, but they are only available after year 2000 as MCD45A1 and BA GEOLAND-2: the total burned area estimation for the study region for the years 2001-2011 was 28.56 millions of ha according to reference data and 12.41, 138.43 and 19.41 millions of ha for the MCD45A1, BA GEOLAND-2 and BA-LTDR burned area products, respectively.

  7. Quantifying dwarf satellites through gravitational imaging: the case of SDSSJ120602.09+514229.5

    NARCIS (Netherlands)

    Vegetti, Simona; Czoske, Oliver; Koopmans, Léon V. E.

    2010-01-01

    SDSSJ120602.09+514229.5 is a gravitational lens system formed by a group of galaxies at redshift zFG = 0.422 lensing a bright background galaxy at redshift zBG = 2.001. The main peculiarity of this system is the presence of a luminous satellite near the Einstein radius, which slightly deforms the gi

  8. Quantifying dwarf satellites through gravitational imaging : The case of SDSS J120602.09+514229.5

    NARCIS (Netherlands)

    Vegetti, Simona; Czoske, Oliver; Koopmans, Léon V. E.

    2010-01-01

    SDSS J120602.09+514229.5 is a gravitational lens system formed by a group of galaxies at redshift z(FG) = 0.422 lensing a bright background galaxy at redshift z(BG) = 2.001. The main peculiarity of this system is the presence of a luminous satellite near the Einstein radius, which slightly deforms t

  9. Near real-time disturbance detection using satellite image time series

    NARCIS (Netherlands)

    Verbesselt, J.P.; Zeileis, A.; Herold, M.

    2012-01-01

    Near real-time monitoring of ecosystem disturbances is critical for rapidly assessing and addressing impacts on carbon dynamics, biodiversity, and socio-ecological processes. Satellite remote sensing enables cost-effective and accurate monitoring at frequent time steps over large areas. Yet, generic

  10. Comparison of data file and storage configurations for efficient temporal access of satellite image data

    CSIR Research Space (South Africa)

    Bachoo, A

    2009-01-01

    Full Text Available Satellite data volumes have seen a steady increase in recent years due to improvements in sensor technology and increases in data acquisition frequency. The gridded MODIS data products, spanning a region of interest of approximately 10° by 10° for a...

  11. Image Mosaicking Approach for a Double-Camera System in the GaoFen2 Optical Remote Sensing Satellite Based on the Big Virtual Camera.

    Science.gov (United States)

    Cheng, Yufeng; Jin, Shuying; Wang, Mi; Zhu, Ying; Dong, Zhipeng

    2017-06-20

    The linear array push broom imaging mode is widely used for high resolution optical satellites (HROS). Using double-cameras attached by a high-rigidity support along with push broom imaging is one method to enlarge the field of view while ensuring high resolution. High accuracy image mosaicking is the key factor of the geometrical quality of complete stitched satellite imagery. This paper proposes a high accuracy image mosaicking approach based on the big virtual camera (BVC) in the double-camera system on the GaoFen2 optical remote sensing satellite (GF2). A big virtual camera can be built according to the rigorous imaging model of a single camera; then, each single image strip obtained by each TDI-CCD detector can be re-projected to the virtual detector of the big virtual camera coordinate system using forward-projection and backward-projection to obtain the corresponding single virtual image. After an on-orbit calibration and relative orientation, the complete final virtual image can be obtained by stitching the single virtual images together based on their coordinate information on the big virtual detector image plane. The paper subtly uses the concept of the big virtual camera to obtain a stitched image and the corresponding high accuracy rational function model (RFM) for concurrent post processing. Experiments verified that the proposed method can achieve seamless mosaicking while maintaining the geometric accuracy.

  12. Mapping shrublands and forests with multispectral satellite images based on spectral unmixing of scene components

    Science.gov (United States)

    Caetano, Mario R.; Oliveira, Tiago; Paul, Jose U.; Vasconcelos, Maria J.; Cardoso Pereira, Jose M.

    1997-12-01

    Linear spectral mixture models (SMM) with image endmembers (IEM) and with reference endmembers (REM) were tested for discriminating maritime pine stands and shrublands in a Landsat-TM image of Central Portugal. For both types of EM, IEM and REM, two types of SMM were tried: SMM with three EM (SMM-3), i.e., green vegetation, soil and shade, and SMM with five EM (SMM-5), where the EM were the components of the landscapes that we were interested on, i.e., pine canopy, shrub, soil, forest litter and shade. Results showed that in the SMM-5, REM need to be used, since IEM were not pure enough. We verified that in the SMM-5, there was not a single set of EM that could be applied to the whole study area, because the shrubs that exist underneath the pine canopy and in the shrublands could not be modeled just by using a shrub EM. Therefore, SMM-5 require a multi-endmember approach, where the set of EM may change from pixel to pixel. In the SMM-3, an accurate discrimination of shrublands and pine stands (90% accuracy) was achieved by thresholding the shade fraction. In these simpler SMM, IEM and REM produced similar results.

  13. Automatic Tracking and Characterization of Cumulonimbus Clouds from FY-2C Geostationary Meteorological Satellite Images

    Directory of Open Access Journals (Sweden)

    Yu Liu

    2014-01-01

    Full Text Available This paper presents an automated method to track cumulonimbus (Cb clouds based on cloud classification and characterizes Cb behavior from FengYun-2C (FY-2C. First, a seeded region growing (SRG algorithm is used with artificial neural network (ANN cloud classification as preprocessing to identify consistent homogeneous Cb patches from infrared images. Second, a cross-correlation-based approach is used to track Cb patches within an image sequence. Third, 7 pixel parameters and 19 cloud patch parameters of Cb are derived. To assess the performance of the proposed method, 8 cases exhibiting different life stages and the temporal evolution of a single case are analyzed. The results show that (1 the proposed method is capable of locating and tracking Cb until dissipation and can account for the eventual splitting or merging of clouds; (2 compared to traditional brightness temperature (TB thresholds-based cloud tracking methods, the proposed method reduces the uncertainty stemming from TB thresholds by classifying clouds with multichannel data in an advanced manner; and (3 the configuration and developmental stages of Cb that the method identifies are close to reality, suggesting that the characterization of Cb can provide detailed insight into the study of the motion and development of thunderstorms.

  14. Irrigation water use monitoring at watershed scale using series of high-resolution satellite images

    Science.gov (United States)

    Díaz, A.; González-Dugo, M. P.; Escuin, S.; Mateos, L.; Cano, F.; Cifuentes, V.; Tirado, J. L.; Oyonarte, N.

    2009-09-01

    The integration of time series of high-resolution remote sensing images in the FAO crop evapotranspiration (ET) model is receiving growing interest in the last years, specially for operational applications in irrigated areas. In this study, a simplified methodology to estimate actual ET for these areas in large watersheds was developed. Then it was applied to the Guadalquivir river watershed (Southern Spain) in the 2007 and 2008 irrigation seasons. The evolution of vegetation indices, obtained from 10 Landsat and IRS images per season, was used for two purposes. Firstly, it was used for identifying crop types based on a classification algorithm. This algorithm used training data from a screened subset of the information declared by farmers for EU agriculture subsidies purposes. Secondly, the vegetation indices were used to obtain basal crop coefficients (Kcb, the component of the crop coefficient that represents transpiration). The last step was the parameterization of the influence of evaporation from the soil surface, considering the averaged effect of a given rain distribution and irrigation schedule. The results showed only small discrepancies between the crop coefficients calculated using the simplified model and those calculated based on a soil water balance and the dual approach proposed by FAO. Therefore, it was concluded that the simplified method can be applied to large irrigation areas where detailed information about soils and/or water applied by farmers lacks..

  15. Imaging Land Subsidence Induced by Groundwater Extraction in Beijing (China Using Satellite Radar Interferometry

    Directory of Open Access Journals (Sweden)

    Mi Chen

    2016-06-01

    Full Text Available Beijing is one of the most water-stressed cities in the world. Due to over-exploitation of groundwater, the Beijing region has been suffering from land subsidence since 1935. In this study, the Small Baseline InSAR technique has been employed to process Envisat ASAR images acquired between 2003 and 2010 and TerraSAR-X stripmap images collected from 2010 to 2011 to investigate land subsidence in the Beijing region. The maximum subsidence is seen in the eastern part of Beijing with a rate greater than 100 mm/year. Comparisons between InSAR and GPS derived subsidence rates show an RMS difference of 2.94 mm/year with a mean of 2.41 ± 1.84 mm/year. In addition, a high correlation was observed between InSAR subsidence rate maps derived from two different datasets (i.e., Envisat and TerraSAR-X. These demonstrate once again that InSAR is a powerful tool for monitoring land subsidence. InSAR derived subsidence rate maps have allowed for a comprehensive spatio-temporal analysis to identify the main triggering factors of land subsidence. Some interesting relationships in terms of land subsidence were found with groundwater level, active faults, accumulated soft soil thickness and different aquifer types. Furthermore, a relationship with the distances to pumping wells was also recognized in this work.

  16. GHRSST Level 2P Eastern Pacific Regional Skin Sea Surface Temperature from the Geostationary Operational Environmental Satellites (GOES) Imager on the GOES-11 satellite (GDS version 1)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geostationary Operational Environmental Satellites (GOES) operated by the United States National Oceanic and Atmospheric Administration (NOAA) support weather...

  17. GHRSST Level 2P West Atlantic Regional Skin Sea Surface Temperature from the Geostationary Operational Environmental Satellites (GOES) Imager on the GOES-12 satellite (GDS version 1)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geostationary Operational Environmental Satellites (GOES) operated by the United States National Oceanic and Atmospheric Administration (NOAA) support weather...

  18. All sky imaging observations in visible and infrared waveband for validation of satellite cloud and aerosol products

    Science.gov (United States)

    Lu, Daren; Huo, Juan; Zhang, W.; Liu, J.

    A series of satellite sensors in visible and infrared wavelengths have been successfully operated on board a number of research satellites, e.g. NOAA/AVHRR, the MODIS onboard Terra and Aqua, etc. A number of cloud and aerosol products are produced and released in recent years. However, the validation of the product quality and accuracy are still a challenge to the atmospheric remote sensing community. In this paper, we suggest a ground based validation scheme for satellite-derived cloud and aerosol products by using combined visible and thermal infrared all sky imaging observations as well as surface meteorological observations. In the scheme, a visible digital camera with a fish-eye lens is used to continuously monitor the all sky with the view angle greater than 180 deg. The digital camera system is calibrated for both its geometry and radiance (broad blue, green, and red band) so as to a retrieval method can be used to detect the clear and cloudy sky spatial distribution and their temporal variations. A calibrated scanning thermal infrared thermometer is used to monitor the all sky brightness temperature distribution. An algorithm is developed to detect the clear and cloudy sky as well as cloud base height by using sky brightness distribution and surface temperature and humidity as input. Based on these composite retrieval of clear and cloudy sky distribution, it can be used to validate the satellite retrievals in the sense of real-simultaneous comparison and statistics, respectively. What will be presented in this talk include the results of the field observations and comparisons completed in Beijing (40 deg N, 116.5 deg E) in year 2003 and 2004. This work is supported by NSFC grant No. 4002700, and MOST grant No 2001CCA02200

  19. In vivo USPIO magnetic resonance imaging shows that minocycline mitigates macrophage recruitment to a peripheral nerve injury

    Directory of Open Access Journals (Sweden)

    Ghanouni Pejman

    2012-06-01

    Full Text Available Abstract Background Minocycline has proven anti-nociceptive effects, but the mechanism by which minocycline delays the development of allodynia and hyperalgesia after peripheral nerve injury remains unclear. Inflammatory cells, in particular macrophages, are critical components of the response to nerve injury. Using ultrasmall superparamagnetic iron oxide-magnetic resonance imaging (USPIO-MRI to monitor macrophage trafficking, the purpose of this project is to determine whether minocycline modulates macrophage trafficking to the site of nerve injury in vivo and, in turn, results in altered pain thresholds. Results Animal experiments were approved by Stanford IACUC. A model of neuropathic pain was created using the Spared Nerve Injury (SNI model that involves ligation of the left sciatic nerve in the left thigh of adult Sprague–Dawley rats. Animals with SNI and uninjured animals were then injected with/without USPIOs (300 μmol/kg IV and with/without minocycline (50 mg/kg IP. Bilateral sciatic nerves were scanned with a volume coil in a 7 T magnet 7 days after USPIO administration. Fluid-sensitive MR images were obtained, and ROIs were placed on bilateral sciatic nerves to quantify signal intensity. Pain behavior modulation by minocycline was measured using the Von Frey filament test. Sciatic nerves were ultimately harvested at day 7, fixed in 10% buffered formalin and stained for the presence of iron oxide-laden macrophages. Behavioral measurements confirmed the presence of allodynia in the neuropathic pain model while the uninjured and minocycline-treated injured group had significantly higher paw withdrawal thresholds (p  Conclusion Animals with neuropathic pain in the left hindpaw show increased trafficking of USPIO-laden macrophages to the site of sciatic nerve injury. Minocycline to retards the migration of macrophages to the nerve injury site, which may partly explain its anti-nociceptive effects. USPIO-MRI is an effective in

  20. Visible foliar injury and infrared imaging show that daylength affects short-term recovery after ozone stress in Trifolium subterraneum.

    Science.gov (United States)

    Vollsnes, Ane V; Eriksen, Aud Berglen; Otterholt, Eli; Kvaal, Knut; Oxaal, Unni; Futsaether, Cecilia M

    2009-01-01

    Tropospheric ozone is a major air pollutant affecting plants worldwide. Plants in northern regions can display more ozone injury than plants at lower latitudes despite lower ozone levels. Larger ozone influx and shorter nights have been suggested as possible causes. However, the effects of the dim light present during northern summer nights have not been investigated. Young Trifolium subterraneum plants kept in environmentally controlled growth rooms under long day (10 h bright light, 14 h dim light) or short day (10 h bright light, 14 h darkness) conditions were exposed to 6 h of 70 ppb ozone during daytime for three consecutive days. Leaves were visually inspected and imaged in vivo using thermal imaging before and after the daily exposure. In long-day-treated plants, visible foliar injury within 1 week after exposure was more severe. Multivariate statistical analyses showed that the leaves of ozone-exposed long-day-treated plants were also warmer with more homogeneous temperature distributions than exposed short day and control plants, suggesting reduced transpiration. Temperature disruptions were not restricted to areas displaying visible damage and occurred even in leaves with only slight visible injury. Ozone did not affect the leaf temperature of short-day-treated plants. As all factors influencing ozone influx were the same for long- and short-day-treated plants, only the dim nocturnal light could account for the different ozone sensitivities. Thus, the twilight summer nights at high latitudes may have a negative effect on repair and defence processes activated after ozone exposure, thereby enhancing sensitivity.

  1. Diffusion spectrum imaging shows the structural basis of functional cerebellar circuits in the human cerebellum in vivo.

    Directory of Open Access Journals (Sweden)

    Cristina Granziera

    Full Text Available BACKGROUND: The cerebellum is a complex structure that can be affected by several congenital and acquired diseases leading to alteration of its function and neuronal circuits. Identifying the structural bases of cerebellar neuronal networks in humans in vivo may provide biomarkers for diagnosis and management of cerebellar diseases. OBJECTIVES: To define the anatomy of intrinsic and extrinsic cerebellar circuits using high-angular resolution diffusion spectrum imaging (DSI. METHODS: We acquired high-resolution structural MRI and DSI of the cerebellum in four healthy female subjects at 3T. DSI tractography based on a streamline algorithm was performed to identify the circuits connecting the cerebellar cortex with the deep cerebellar nuclei, selected brainstem nuclei, and the thalamus. RESULTS: Using in-vivo DSI in humans we were able to demonstrate the structure of the following cerebellar neuronal circuits: (1 connections of the inferior olivary nucleus with the cerebellar cortex, and with the deep cerebellar nuclei (2 connections between the cerebellar cortex and the deep cerebellar nuclei, (3 connections of the deep cerebellar nuclei conveyed in the superior (SCP, middle (MCP and inferior (ICP cerebellar peduncles, (4 complex intersections of fibers in the SCP, MCP and ICP, and (5 connections between the deep cerebellar nuclei and the red nucleus and the thalamus. CONCLUSION: For the first time, we show that DSI tractography in humans in vivo is capable of revealing the structural bases of complex cerebellar networks. DSI thus appears to be a promising imaging method for characterizing anatomical disruptions that occur in cerebellar diseases, and for monitoring response to therapeutic interventions.

  2. Neuromolecular Imaging Shows Temporal Synchrony Patterns between Serotonin and Movement within Neuronal Motor Circuits in the Brain

    Directory of Open Access Journals (Sweden)

    Patricia A. Broderick

    2013-06-01

    Full Text Available The present discourse links the electrical and chemical properties of the brain with neurotransmitters and movement behaviors to further elucidate strategies to diagnose and treat brain disease. Neuromolecular imaging (NMI, based on electrochemical principles, is used to detect serotonin in nerve terminals (dorsal and ventral striata and somatodendrites (ventral tegmentum of reward/motor mesocorticolimbic and nigrostriatal brain circuits. Neuronal release of serotonin is detected at the same time and in the same animal, freely moving and unrestrained, while open-field behaviors are monitored via infrared photobeams. The purpose is to emphasize the unique ability of NMI and the BRODERICK PROBE® biosensors to empirically image a pattern of temporal synchrony, previously reported, for example, in Aplysia using central pattern generators (CPGs, serotonin and cerebral peptide-2. Temporal synchrony is reviewed within the context of the literature on central pattern generators, neurotransmitters and movement disorders. Specifically, temporal synchrony data are derived from studies on psychostimulant behavior with and without cocaine while at the same time and continuously, serotonin release in motor neurons within basal ganglia, is detected. The results show that temporal synchrony between the neurotransmitter, serotonin and natural movement occurs when the brain is NOT injured via, e.g., trauma, addictive drugs or psychiatric illness. In striking contrast, in the case of serotonin and cocaine-induced psychostimulant behavior, a different form of synchrony and also asynchrony can occur. Thus, the known dysfunctional movement behavior produced by cocaine may well be related to the loss of temporal synchrony, the loss of the ability to match serotonin in brain with motor activity. The empirical study of temporal synchrony patterns in humans and animals may be more relevant to the dynamics of motor circuits and movement behaviors than are studies of

  3. Ten Years of Vegetation Change in Northern California Marshlands Detected using Landsat Satellite Image Analysis

    Science.gov (United States)

    Potter, Christopher

    2013-01-01

    The Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) methodology was applied to detected changes in perennial vegetation cover at marshland sites in Northern California reported to have undergone restoration between 1999 and 2009. Results showed extensive contiguous areas of restored marshland plant cover at 10 of the 14 sites selected. Gains in either woody shrub cover and/or from recovery of herbaceous cover that remains productive and evergreen on a year-round basis could be mapped out from the image results. However, LEDAPS may not be highly sensitive changes in wetlands that have been restored mainly with seasonal herbaceous cover (e.g., vernal pools), due to the ephemeral nature of the plant greenness signal. Based on this evaluation, the LEDAPS methodology would be capable of fulfilling a pressing need for consistent, continual, low-cost monitoring of changes in marshland ecosystems of the Pacific Flyway.

  4. Determining the Suitability of Different Digital Elevation Models and Satellite Images for Fancy Maps. An Example of Cyprus

    Science.gov (United States)

    Drachal, J.; Kawel, A. K.

    2016-06-01

    The article describes the possibility of developing an overall map of the selected area on the basis of publicly available data. Such a map would take the form designed by the author with the colors that meets his expectations and a content, which he considers to be appropriate. Among the data available it was considered the use of satellite images of the terrain in real colors and, in the form of shaded relief, digital terrain models with different resolutions of the terrain mesh. Specifically the considered data were: MODIS, Landsat 8, GTOPO-30, SRTM-30, SRTM-1, SRTM-3, ASTER. For the test area the island of Cyprus was chosen because of the importance in tourism, a relatively small area and a clearly defined boundary. In the paper there are shown and discussed various options of the Cyprus terrain image obtained synthetically from variants of Modis, Landsat and digital elevation models of different resolutions.

  5. Automatic Cloud and Shadow Detection in Optical Satellite Imagery Without Using Thermal Bands—Application to Suomi NPP VIIRS Images over Fennoscandia

    Directory of Open Access Journals (Sweden)

    Eija Parmes

    2017-08-01

    Full Text Available In land monitoring applications, clouds and shadows are considered noise that should be removed as automatically and quickly as possible, before further analysis. This paper presents a method to detect clouds and shadows in Suomi NPP satellite’s VIIRS (Visible Infrared Imaging Radiometer Suite satellite images. The proposed cloud and shadow detection method has two distinct features when compared to many other methods. First, the method does not use the thermal bands and can thus be applied to other sensors which do not contain thermal channels, such as Sentinel-2 data. Secondly, the method uses the ratio between blue and green reflectance to detect shadows. Seven hundred and forty-seven VIIRS images over Fennoscandia from August 2014 to April 2016 were processed to train and develop the method. Twenty four points from every tenth of the images were used in accuracy assessment. These 1752 points were interpreted visually to cloud, cloud shadow and clear classes, then compared to the output of the cloud and shadow detection. The comparison on VIIRS images showed 94.2% correct detection rates and 11.1% false alarms for clouds, and respectively 36.1% and 82.7% for shadows. The results on cloud detection were similar to state-of-the-art methods. Shadows showed correctly on the northern edge of the clouds, but many shadows were wrongly assigned to other classes in some cases (e.g., to water class on lake and forest boundary, or with shadows over cloud. This may be due to the low spatial resolution of VIIRS images, where shadows are only a few pixels wide and contain lots of mixed pixels.

  6. Estimates of changes of structural parameters of forest ecosystems in decoding high resolution satellite images

    Directory of Open Access Journals (Sweden)

    Yuri F. Rozhkov

    2016-05-01

    Full Text Available Aim of this study was to assess the possibility of using of the parameter of symmetry of pixel distribution in the forest condition monitoring. Multispectral satellite imagery and their fragments of high and medium resolution (Landsat TM/ЕТМ+, Aster, Spot, IRS, which have been made in 1995–2011, were processed in two stages. At the first stage, uncontrolled classification has been carried out using the method ISODATA (Iterative Self-Organizing Data Analysis Technigue. At the second stage, parameter of symmetry of pixel distribution was calculated. The results of classification were divided into two halves. Classes with lower optical density of the reflected light were concentrated in the upper half while classes with higher optical density of the reflected light were concentrated in the bottom half. The prospects for using the parameter symmetry of pixel distribution aim to assess the degree of forest disturbance after the fire impact was demonstrated. Disturbed forest areas a have larger sum of pixels in the bottom half of the classification results compared with the upper half. In contrast, undisturbed forest areas have a larger or equal sum of pixels in the upper half of the classification results compared with the bottom half. The prospects for using the parameter symmetry of pixel distribution in monitoring of seasonal changes of forest status were demonstrated. Comparison of two forest fragments with dominance of larch and Siberian pine showed that during the autumn months (September, October after needle fall and leaf fall, there is a sharp decrease of the parameter "symmetry of pixel distribution" within the fragment with dominance of larch due to the increase of the proportion of pixels with high optical density. Seasonal changes in the parameter of symmetry of pixels distribution were less pronounced for the forest fragment with dominance of Siberian pine. We considered the prospect to use the parameter of symmetry of pixel

  7. Measurement of Surface Displacement and Deformation of Mass Movements Using Least Squares Matching of Repeat High Resolution Satellite and Aerial Images

    Directory of Open Access Journals (Sweden)

    Misganu Debella-Gilo

    2012-01-01

    Full Text Available Displacement and deformation are fundamental measures of Earth surface mass movements such as glacier flow, rockglacier creep and rockslides. Ground-based methods of monitoring such mass movements can be costly, time consuming and limited in spatial and temporal coverage. Remote sensing techniques, here matching of repeat optical images, are increasingly used to obtain displacement and deformation fields. Strain rates are usually computed in a post-processing step based on the gradients of the measured velocity field. This study explores the potential of automatically and directly computing velocity, rotation and strain rates on Earth surface mass movements simultaneously from the matching positions and the parameters of the geometric transformation models using the least squares matching (LSM approach. The procedures are exemplified using bi-temporal high resolution satellite and aerial images of glacier flow, rockglacier creep and land sliding. The results show that LSM matches the images and computes longitudinal strain rates, transverse strain rates and shear strain rates reliably with mean absolute deviations in the order of 10−4 (one level of significance below the measured values as evaluated on stable grounds. The LSM also improves the accuracy of displacement estimation of the pixel-precision normalized cross-correlation by over 90% under ideal (simulated circumstances and by about 25% for real multi-temporal images of mass movements.

  8. Modeling the spectral response for the soft X-ray imager onboard the ASTRO-H satellite

    Science.gov (United States)

    Inoue, Shota; Hayashida, Kiyoshi; Katada, Shuhei; Nakajima, Hiroshi; Nagino, Ryo; Anabuki, Naohisa; Tsunemi, Hiroshi; Tsuru, Takeshi Go; Tanaka, Takaaki; Uchida, Hiroyuki; Nobukawa, Masayoshi; Nobukawa, Kumiko Kawabata; Washino, Ryosaku; Mori, Koji; Isoda, Eri; Sakata, Miho; Kohmura, Tak