Probabilistic Reverse dOsimetry Estimating Exposure Distribution (PROcEED)

Science.gov (United States)

PROcEED is a web-based application used to conduct probabilistic reverse dosimetry calculations.The tool is used for estimating a distribution of exposure concentrations likely to have produced biomarker concentrations measured in a population.

Sas2

International Development Research Centre (IDRC) Digital Library (Canada)

The fascinating multi-country examples in the Guide illustrate how SAS2 ... The challenge is to raise all forms of inquiry to the power of two: making the .... This requires an ability to suspend judgment, consider the views of others, ..... Our view is that the drive to think "holistically" must always be expressed with local color and ...

Evaluation of pro-c global for identification of defects in protein c/s anticoagulant pathway

International Nuclear Information System (INIS)

Hanif, T.B.; Anwar, J.; Idrees, M.

2011-01-01

Background: Detection of protein C and S deficiency forms a major investigation in the laboratory evaluation of thrombophilia screening. It has key role in the diagnosis of protein C and S deficiency. The objective of this study is to determine the utility of ProC Global as a screening test for identifying the defects of protein C and S anticoagulant pathways. Methods: Two Hundred patients with venous thromboembolism were studied at the Department of Haematology, Armed Forces Institute of Pathology, Rawalpindi, from October 2004 to March 2006. ProC Global test (Dade Behring Diagnostics) was performed and was followed up by protein C and S assays. ProC Global is an activated partial thromboplastin time based assay in which Protac (snake venom from Aghistroden contortrix) is used for activation of the endogenous protein C of the plasma sample. The protein C activation time in the presence of the activator was set in relation to a parallel determination of PCAT/O with addition of a buffer instead of activator reagent. The ratio PCAT: PCAT/O was transformed in normalized ratio by relating them to a calibrator. Control plasma for normal range and ProC control plasma for pathological range (Dade Behring Diagnostics) were assayed in each run for quality control. Results: A total of 200 patients, 132 (66%) males and 68 (34%) females with age ranging from 1 to 68 years were studied. ProC Global was positive in 29/200 (14.5%) patients. ProC Global was found to be 86% sensitive, 94% specific and its overall efficiency turned out to be 94%. Conclusion: Pro-C Global can be used effectively as a screening test to detect abnormalities in protein C and S anticoagulant pathways. (author)

Extending and Enhancing SAS (Static Analysis Suite)

CERN Document Server

Ho, David

2016-01-01

The Static Analysis Suite (SAS) is an open-source software package used to perform static analysis on C and C++ code, helping to ensure safety, readability and maintainability. In this Summer Student project, SAS was enhanced to improve ease of use and user customisation. A straightforward method of integrating static analysis into a project at compilation time was provided using the automated build tool CMake. The process of adding checkers to the suite was streamlined and simplied by developing an automatic code generator. To make SAS more suitable for continuous integration, a reporting mechanism summarising results was added. This suitability has been demonstrated by inclusion of SAS in the Future Circular Collider Software nightly build system. Scalability of the improved package was demonstrated by using the tool to analyse the ROOT code base.

Homework Solutions S.A.S.

OpenAIRE

Acero Mora, Mariluz; Hernández Laguna, Liliana

2012-01-01

Homework Solutions S.A.S, será una empresa de servicios dedicada a brindar asesorías de tareas y trabajos bilingües con soluciones al instante sin que los padres de familia tengan que pagar por meses o semestres. Está previsto que dicha empresa empiece operaciones en el mes de Enero de 2013. Homework Solutions S.A.S, trabajará a domicilio, en los colegios que requieran sus servicios y en su sede principal ubicada al norte de la ciudad de Bogotá.

Particle and particle systems characterization small-angle scattering (SAS) applications

CERN Document Server

Gille, Wilfried

2016-01-01

Small-angle scattering (SAS) is the premier technique for the characterization of disordered nanoscale particle ensembles. SAS is produced by the particle as a whole and does not depend in any way on the internal crystal structure of the particle. Since the first applications of X-ray scattering in the 1930s, SAS has developed into a standard method in the field of materials science. SAS is a non-destructive method and can be directly applied for solid and liquid samples. Particle and Particle Systems Characterization: Small-Angle Scattering (SAS) Applications is geared to any scientist who might want to apply SAS to study tightly packed particle ensembles using elements of stochastic geometry. After completing the book, the reader should be able to demonstrate detailed knowledge of the application of SAS for the characterization of physical and chemical materials.

A SAS IML Macro for Loglinear Smoothing

Science.gov (United States)

Moses, Tim; von Davier, Alina

2011-01-01

Polynomial loglinear models for one-, two-, and higher-way contingency tables have important applications to measurement and assessment. They are essentially regarded as a smoothing technique, which is commonly referred to as loglinear smoothing. A SAS IML (SAS Institute, 2002a) macro was created to implement loglinear smoothing according to…

Regression modeling methods, theory, and computation with SAS

CERN Document Server

Panik, Michael

2009-01-01

Regression Modeling: Methods, Theory, and Computation with SAS provides an introduction to a diverse assortment of regression techniques using SAS to solve a wide variety of regression problems. The author fully documents the SAS programs and thoroughly explains the output produced by the programs.The text presents the popular ordinary least squares (OLS) approach before introducing many alternative regression methods. It covers nonparametric regression, logistic regression (including Poisson regression), Bayesian regression, robust regression, fuzzy regression, random coefficients regression,

pROC: an open-source package for R and S+ to analyze and compare ROC curves.

Science.gov (United States)

Robin, Xavier; Turck, Natacha; Hainard, Alexandre; Tiberti, Natalia; Lisacek, Frédérique; Sanchez, Jean-Charles; Müller, Markus

2011-03-17

Receiver operating characteristic (ROC) curves are useful tools to evaluate classifiers in biomedical and bioinformatics applications. However, conclusions are often reached through inconsistent use or insufficient statistical analysis. To support researchers in their ROC curves analysis we developed pROC, a package for R and S+ that contains a set of tools displaying, analyzing, smoothing and comparing ROC curves in a user-friendly, object-oriented and flexible interface. With data previously imported into the R or S+ environment, the pROC package builds ROC curves and includes functions for computing confidence intervals, statistical tests for comparing total or partial area under the curve or the operating points of different classifiers, and methods for smoothing ROC curves. Intermediary and final results are visualised in user-friendly interfaces. A case study based on published clinical and biomarker data shows how to perform a typical ROC analysis with pROC. pROC is a package for R and S+ specifically dedicated to ROC analysis. It proposes multiple statistical tests to compare ROC curves, and in particular partial areas under the curve, allowing proper ROC interpretation. pROC is available in two versions: in the R programming language or with a graphical user interface in the S+ statistical software. It is accessible at http://expasy.org/tools/pROC/ under the GNU General Public License. It is also distributed through the CRAN and CSAN public repositories, facilitating its installation.

Technical note: Validation of an ear-tag accelerometer sensor to determine rumination, eating, and activity behaviors of grazing dairy cattle.

Science.gov (United States)

Pereira, G M; Heins, B J; Endres, M I

2018-03-01

The objective of this study was to validate an ear-tag accelerometer sensor (CowManager SensOor, Agis Automatisering BV, Harmelen, the Netherlands) using direct visual observations in a grazing dairy herd. Lactating crossbred cows (n = 24) were used for this experiment at the University of Minnesota West Central Research and Outreach Center grazing dairy (Morris, MN) during the summer of 2016. A single trained observer recorded behavior every minute for 6 h for each cow (24 cows × 6 h = 144 h of observation total). Direct visual observation was compared with sensor data during August and September 2016. The sensor detected and identified ear and head movements, and through algorithms the sensor classified each minute as one of the following behaviors: rumination, eating, not active, active, and high active. A 2-sided t-test was conducted with PROC TTEST of SAS (SAS Institute Inc., Cary, NC) to compare the percentage of time each cow's behavior was recorded by direct visual observation and sensor data. For total recorded time, the percentage of time of direct visual observation compared with sensor data was 17.9 and 19.1% for rumination, 52.8 and 51.9% for eating, 17.4 and 11.9% for not active, and 7.9 and 21.1% for active. Pearson correlations (PROC CORR of SAS) were used to evaluate associations between direct visual observations and sensor data. Furthermore, concordance correlation coefficient (CCC), bias correction factors, location shift, and scale shift (epiR package of R version 3.3.1; R Foundation for Statistical Computing, Vienna, Austria) were calculated to provide a measure of accuracy and precision. Correlations between visual observations for all 4 behaviors were highly to weakly correlated (rumination: r = 0.72, CCC = 0.71; eating: r = 0.88, CCC = 0.88; not active: r = 0.65, CCC = 0.52; and active: r = 0.20, CCC = 0.19) compared with sensor data. The results suggest that the sensor accurately monitors rumination and eating behavior of grazing dairy

Modeling nest-survival data: a comparison of recently developed methods that can be implemented in MARK and SAS

Directory of Open Access Journals (Sweden)

Rotella, J. J.

2004-06-01

Full Text Available Estimating nest success and evaluating factors potentially related to the survival rates of nests are key aspects of many studies of avian populations. A strong interest in nest success has led to a rich literature detailing a variety of estimation methods for this vital rate. In recent years, modeling approaches have undergone especially rapid development. Despite these advances, most researchers still employ Mayfield’s ad-hoc method (Mayfield, 1961 or, in some cases, the maximum-likelihood estimator of Johnson (1979 and Bart & Robson (1982. Such methods permit analyses of stratified data but do not allow for more complex and realistic models of nest survival rate that include covariates that vary by individual, nest age, time, etc. and that may be continuous or categorical. Methods that allow researchers to rigorously assess the importance of a variety of biological factors that might affect nest survival rates can now be readily implemented in Program MARK and in SAS’s Proc GENMOD and Proc NLMIXED. Accordingly, use of Mayfield’s estimator without first evaluating the need for more complex models of nest survival rate cannot be justified. With the goal of increasing the use of more flexible methods, we first describe the likelihood used for these models and then consider the question of what the effective sample size is for computation of AICc. Next, we consider the advantages and disadvantages of these different programs in terms of ease of data input and model construction; utility/flexibility of generated estimates and predictions; ease of model selection; and ability to estimate variance components. An example data set is then analyzed using both MARK and SAS to demonstrate implementation of the methods with various models that contain nest-, group- (or block-, and time-specific covariates. Finally, we discuss improvements that would, if they became available, promote a better general understanding of nest survival rates.

Validity of Simpson-Angus Scale (SAS) in a naturalistic schizophrenia population.

Science.gov (United States)

Janno, Sven; Holi, Matti M; Tuisku, Katinka; Wahlbeck, Kristian

2005-03-17

Simpson-Angus Scale (SAS) is an established instrument for neuroleptic-induced parkinsonism (NIP), but its statistical properties have been studied insufficiently. Some shortcomings concerning its content have been suggested as well. According to a recent report, the widely used SAS mean score cut-off value 0.3 of for NIP detection may be too low. Our aim was to evaluate SAS against DSM-IV diagnostic criteria for NIP and objective motor assessment (actometry). Ninety-nine chronic institutionalised schizophrenia patients were evaluated during the same interview by standardised actometric recording and SAS. The diagnosis of NIP was based on DSM-IV criteria. Internal consistency measured by Cronbach's alpha, convergence to actometry and the capacity for NIP case detection were assessed. Cronbach's alpha for the scale was 0.79. SAS discriminated between DSM-IV NIP and non-NIP patients. The actometric findings did not correlate with SAS. ROC-analysis yielded a good case detection power for SAS mean score. The optimal threshold value of SAS mean score was between 0.65 and 0.95, i.e. clearly higher than previously suggested threshold value. We conclude that SAS seems a reliable and valid instrument. The previously commonly used cut-off mean score of 0.3 has been too low resulting in low specificity, and we suggest a new cut-off value of 0.65, whereby specificity could be doubled without loosing sensitivity.

Validity of Simpson-Angus Scale (SAS in a naturalistic schizophrenia population

Directory of Open Access Journals (Sweden)

Tuisku Katinka

2005-03-01

Full Text Available Abstract Background Simpson-Angus Scale (SAS is an established instrument for neuroleptic-induced parkinsonism (NIP, but its statistical properties have been studied insufficiently. Some shortcomings concerning its content have been suggested as well. According to a recent report, the widely used SAS mean score cut-off value 0.3 of for NIP detection may be too low. Our aim was to evaluate SAS against DSM-IV diagnostic criteria for NIP and objective motor assessment (actometry. Methods Ninety-nine chronic institutionalised schizophrenia patients were evaluated during the same interview by standardised actometric recording and SAS. The diagnosis of NIP was based on DSM-IV criteria. Internal consistency measured by Cronbach's α, convergence to actometry and the capacity for NIP case detection were assessed. Results Cronbach's α for the scale was 0.79. SAS discriminated between DSM-IV NIP and non-NIP patients. The actometric findings did not correlate with SAS. ROC-analysis yielded a good case detection power for SAS mean score. The optimal threshold value of SAS mean score was between 0.65 and 0.95, i.e. clearly higher than previously suggested threshold value. Conclusion We conclude that SAS seems a reliable and valid instrument. The previously commonly used cut-off mean score of 0.3 has been too low resulting in low specificity, and we suggest a new cut-off value of 0.65, whereby specificity could be doubled without loosing sensitivity.

SAS3DC - A computer program to describe accidents in LMFBRs

International Nuclear Information System (INIS)

Angerer, G.; Arnecke, G.; Polch, A.

1981-02-01

The code system SAS3D - developed in the ANL - is at present the most adequate instrument for simulating accidents in the LMFBRs. SAS3DC is an improved version of this code system: the routine CLAZAS - modelling in SAS3D the motion of the fuel cladding - is replaced in the SAS3DC by the routine CMOT. CMOT describes the moving material not in the Lagrangian - as CLAZAS - but in the Eulerian system and is so able to register even small cladding-displacements. To complete the description of the SAS3DC-code the results of some sample problems are included. (orig.) [de

[Standardization of the Greek version of Zung's Self-rating Anxiety Scale (SAS)].

Science.gov (United States)

Samakouri, M; Bouhos, G; Kadoglou, M; Giantzelidou, A; Tsolaki, K; Livaditis, M

2012-01-01

Self-rating Anxiety Scale (SAS), introduced by Zung, has been widely used in research and in clinical practice for the detection of anxiety. The present study aims at standardizing the Greek version of SAS. SAS consists of 20 items rated on a 1-4 likert type scale. The total SAS score may vary from 20 (no anxiety at all) to 80 (severe anxiety). Two hundred and fifty four participants (114 male and 140 female), psychiatric patients, physically ill and general population individuals, aged 45.40±11.35 years, completed the following: (a) a demographic characteristics' questionnaire, (b) the SAS Greek version, (c) the Spielberg's Modified Greek State-Trait Anxiety Scale (STAI-Gr.-X) and (d) the Zung Depression Rating Scale (ZDRS). Seventy six participants answered the SAS twice within a 12th-day median period of time. The following parameters were calculated: (a) internal consistency of the SAS in terms of Cronbach's α co-efficient, (b) its test-retest reliability in terms of the Intraclass Correlation Coefficient (ICC) and (c) its concurrent and convergent validities through its score's Spearman's rho correlations with both the state and trait subscales of STAI-Gr X and the ZDRS. In addition, in order to evaluate SAS' discriminant validity, the scale's scores of the three groups of participants (psychiatric patients, physically ill and general population individuals) were compared among each other, in terms of Kruskall Wallis and Mann Whitney U tests. SAS Cronbach's alpha equals 0.897 while ICC regarding its test-retest reliability equals 0.913. Spearman's rho concerning validity: (a) when SAS is compared to STAI-Gr.-X (state), equals it 0.767, (b) when SAS is compared to STAI-Gr. X (trait), it equals 0.802 and (c) when SAS is compared to ZDRS, it equals 0.835. The mentally ill scored significantly higher in SAS compared to both the healthy and the general population. In conclusion, the SAS Greek version presents very satisfactory psychometric properties regarding

SAS and R data management, statistical analysis, and graphics

CERN Document Server

Kleinman, Ken

2009-01-01

An All-in-One Resource for Using SAS and R to Carry out Common TasksProvides a path between languages that is easier than reading complete documentationSAS and R: Data Management, Statistical Analysis, and Graphics presents an easy way to learn how to perform an analytical task in both SAS and R, without having to navigate through the extensive, idiosyncratic, and sometimes unwieldy software documentation. The book covers many common tasks, such as data management, descriptive summaries, inferential procedures, regression analysis, and the creation of graphics, along with more complex applicat

Mirror suspension system for the TAMA SAS

CERN Document Server

Takamori, A; Bertolini, A; Cella, G; DeSalvo, R; Fukushima, M; Iida, Y; Jacquier, F; Kawamura, S; Marka, S; Nishi, Y; Numata, K; Sannibale, V; Somiya, K; Takahashi, R; Tariq, H; Tsubono, K; Ugas, J; Viboud, N; Yamamoto, H; Yoda, T; Wang Chen Yang

2002-01-01

Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SU...

Surface anatomy scanning (SAS) in intracranial tumours: comparison with surgical findings

International Nuclear Information System (INIS)

Sumida, M.; Uozumi, T.; Kiya, K.; Arita, K.; Kurisu, K.; Onda, J.; Satoh, H.; Ikawa, F.; Yukawa, O.; Migita, K.; Hada, H.; Katada, K.

1995-01-01

We evaluated the usefulness of surface anatomy scanning (SAS) in intracranial tumours, comparing it with surgical findings. We examined 31 patients with brain tumours preoperatively. The tumours included 16 meningiomas, 8 gliomas, 4 metastases and 3 others. SAS clearly demonstrated the tumours, allowing them to be distinguished from the structures of the brain surface, including oedema, except in cases of metastasis. SAS clearly demonstrated large cortical veins. SAS is useful for three-dimensional delineation of the brain surface before surgery. (orig.)

Adaptive beamforming for low frequency SAS imagery and bathymetry

NARCIS (Netherlands)

Hayes, M.P.; Hunter, A.J.

2012-01-01

Synthetic aperture side-scan sonar (SAS) is a mature technology for high-resolution sea floor imaging [1]. Interferometric synthetic aperture sonars (InSAS) use additional hydrophones in a vertical array for bathymetric mapping [2]. This has created high-resolution bathymetry in deep water

First report of sasX-positive methicillin-resistant Staphylococcus aureus in Japan.

Science.gov (United States)

Nakaminami, Hidemasa; Ito, Teruyo; Han, Xiao; Ito, Ayumu; Matsuo, Miki; Uehara, Yuki; Baba, Tadashi; Hiramatsu, Keiichi; Noguchi, Norihisa

2017-09-01

SasX is a known virulence factor of Staphylococcus aureus involved in colonisation and immune evasion of the bacterium. The sasX gene, which is located on the ϕSPβ prophage, is frequently found in the sequence type (ST) 239 S. aureus lineage, which is the predominant healthcare-associated clone in Asian countries. In Japan, ST239 clones have rarely been identified, and sasX-positive strains have not been reported to date. Here, we report the first identification of 18 sasX-positive methicillin-resistant S. aureus (MRSA) strains in Japanese hospitals between 2009 and 2011. All sasX-positive isolates belonged to an ST239-staphylococcal cassette chromosome mec type III (ST239-III) lineage. However, we were unable to identify additional sasX-positive MRSA strains from 2012 to 2016, indicating that the small epidemic of sasX-positive isolates observed in this study was temporary. The sequence surrounding sasX in the strain TOHH628 lacked 51 genes that encode phage packaging and structural proteins, and no bacteriophage was induced by mitomycin C. Additionally, in the TOHH628 strain, the region (64.6 kb) containing sasX showed high identity to the ϕSPβ-like element (71.3 kb) of the Taiwanese MRSA strain Z172. The data strongly suggest that the present sasX-positive isolates found in Japanese hospitals were transmitted incidentally from other countries. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Hotelli Radisson SAS mantra : jah, ma saan! / Kai Vare

Index Scriptorium Estoniae

Vare, Kai, 1968-

2004-01-01

Radisson SAS hotell Tallinnas on kliendirahulolu-uuringute järgi keti hotellide seas esimeste hulgas. Hotelli direktor Kaido Ojaperv ja müügijuht Ann-Kai Tõrs Radisson SAS-i standarditest, kliendi sajaprotsendilise rahulolu tagamise põhimõtetest, personali valikust, koolitusest. Kommenteerib Sandra Dimitrovich

SAS validation and analysis of in-pile TUCOP experiments

International Nuclear Information System (INIS)

Morman, J.A.; Tentner, A.M.; Dever, D.J.

1985-01-01

The validation of the SAS4A accident analysis code centers on its capability to calculate the wide range of tests performed in the TREAT (Transient Reactor Test Facility) in-pile experiments program. This paper presents the SAS4A analysis of a simulated TUCOP (Transient-Under-Cooled-Over-Power) experiment using seven full-length PFR mixed oxide fuel pins in a flowing sodium loop. Calculations agree well with measured thermal-hydraulic, pin failure time and post-failure fuel motion data. The extent of the agreement confirms the validity of the models used in the SAS4A code to describe TUCOP accidents

40 CFR Appendix IV to Part 264 - Cochran's Approximation to the Behrens-Fisher Students' t-test

Science.gov (United States)

2010-07-01

...-Fisher Students' t-test IV Appendix IV to Part 264 Protection of Environment ENVIRONMENTAL PROTECTION... to the Behrens-Fisher Students' t-test Using all the available background data (nb readings... Table III of “Statistical Tables for Biological, Agricultural, and Medical Research” (1947, R. A. Fisher...

Structures of SAS-6 suggest its organization in centrioles.

Science.gov (United States)

van Breugel, Mark; Hirono, Masafumi; Andreeva, Antonina; Yanagisawa, Haru-aki; Yamaguchi, Shoko; Nakazawa, Yuki; Morgner, Nina; Petrovich, Miriana; Ebong, Ima-Obong; Robinson, Carol V; Johnson, Christopher M; Veprintsev, Dmitry; Zuber, Benoît

2011-03-04

Centrioles are cylindrical, ninefold symmetrical structures with peripheral triplet microtubules strictly required to template cilia and flagella. The highly conserved protein SAS-6 constitutes the center of the cartwheel assembly that scaffolds centrioles early in their biogenesis. We determined the x-ray structure of the amino-terminal domain of SAS-6 from zebrafish, and we show that recombinant SAS-6 self-associates in vitro into assemblies that resemble cartwheel centers. Point mutations are consistent with the notion that centriole formation in vivo depends on the interactions that define the self-assemblies observed here. Thus, these interactions are probably essential to the structural organization of cartwheel centers.

Napojení .NET / Java technologie na SAS BI

OpenAIRE

Jandák, Miroslav

2009-01-01

This thesis is focused on SAS Enterprise Intelligence Platform product and it's capabilities to integrate within a Business Intelligence solution. The aim of the thesis is to describe integration technolgies that the platform features, as well as to determine their application field and compare them, eventually add usage examples. The first part of the thesis explains the general concept and architecture of Business Intelligence, afterwards the reader gets familiar with the SAS Enterprise Int...

Multivariate Welch t-test on distances.

Science.gov (United States)

Alekseyenko, Alexander V

2016-12-01

Permutational non-Euclidean analysis of variance, PERMANOVA, is routinely used in exploratory analysis of multivariate datasets to draw conclusions about the significance of patterns visualized through dimension reduction. This method recognizes that pairwise distance matrix between observations is sufficient to compute within and between group sums of squares necessary to form the (pseudo) F statistic. Moreover, not only Euclidean, but arbitrary distances can be used. This method, however, suffers from loss of power and type I error inflation in the presence of heteroscedasticity and sample size imbalances. We develop a solution in the form of a distance-based Welch t-test, [Formula: see text], for two sample potentially unbalanced and heteroscedastic data. We demonstrate empirically the desirable type I error and power characteristics of the new test. We compare the performance of PERMANOVA and [Formula: see text] in reanalysis of two existing microbiome datasets, where the methodology has originated. The source code for methods and analysis of this article is available at https://github.com/alekseyenko/Tw2 Further guidance on application of these methods can be obtained from the author. alekseye@musc.edu. © The Author 2016. Published by Oxford University Press.

Statistical hypothesis testing with SAS and R

CERN Document Server

Taeger, Dirk

2014-01-01

A comprehensive guide to statistical hypothesis testing with examples in SAS and R When analyzing datasets the following questions often arise:Is there a short hand procedure for a statistical test available in SAS or R?If so, how do I use it?If not, how do I program the test myself? This book answers these questions and provides an overview of the most commonstatistical test problems in a comprehensive way, making it easy to find and performan appropriate statistical test. A general summary of statistical test theory is presented, along with a basicdescription for each test, including the

Use of "t"-Test and ANOVA in Career-Technical Education Research

Science.gov (United States)

Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

2012-01-01

Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

A two-sample Bayesian t-test for microarray data

Directory of Open Access Journals (Sweden)

Dimmic Matthew W

2006-03-01

Full Text Available Abstract Background Determining whether a gene is differentially expressed in two different samples remains an important statistical problem. Prior work in this area has featured the use of t-tests with pooled estimates of the sample variance based on similarly expressed genes. These methods do not display consistent behavior across the entire range of pooling and can be biased when the prior hyperparameters are specified heuristically. Results A two-sample Bayesian t-test is proposed for use in determining whether a gene is differentially expressed in two different samples. The test method is an extension of earlier work that made use of point estimates for the variance. The method proposed here explicitly calculates in analytic form the marginal distribution for the difference in the mean expression of two samples, obviating the need for point estimates of the variance without recourse to posterior simulation. The prior distribution involves a single hyperparameter that can be calculated in a statistically rigorous manner, making clear the connection between the prior degrees of freedom and prior variance. Conclusion The test is easy to understand and implement and application to both real and simulated data shows that the method has equal or greater power compared to the previous method and demonstrates consistent Type I error rates. The test is generally applicable outside the microarray field to any situation where prior information about the variance is available and is not limited to cases where estimates of the variance are based on many similar observations.

Mirror suspension system for the TAMA SAS

International Nuclear Information System (INIS)

Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Marka, Szabolcs; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Yamamoto, Hiroaki; Yoda, Tatsuo; Wang Chenyang

2002-01-01

Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SUS is equipped with a totally passive magnetic damper to suppress internal resonances without degrading the thermal noise performance. In this paper we discuss the SUS details and present prototype results

A new cavity model for SAS4A

International Nuclear Information System (INIS)

Moxon, D.; Camous, F.

1994-01-01

The SAS4 code is the fourth generation of the SAS series developed at the ANL to study the initiating phase of hypothetical core disruptive accidents in LMFBRs. It was made available to the CEA in order to obtain more validation studies and model developments. The new cavity model described and incorporated in the code was first developed as a stand-alone code. It was thoroughly tested numerically and found to be quick and stable. Tis paper describes only the physical phenomena taken into account

Mesures de procédure spéciales et respect des droits de l'homme Rapport général

OpenAIRE

Vervaele, J.A.E.

2009-01-01

Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le terrorisme et la criminalité organisée, et de voir si cela a conduit les pays à se départir de leur propres règles fondamentales, procédures, principes et standards des droits de l’homme applicables...

Pro-C5, a marker of true type V collagen formation and fibrillation, correlates with portal hypertension in patients with alcoholic cirrhosis

DEFF Research Database (Denmark)

Leeming, Diana J; Veidal, Sanne S; Karsdal, Morten A

2015-01-01

Pro-C5 reflects liver hemodynamics, liver function, disease stage and clinically significant portal hypertension (PH). A multimarker model in combination with clinical scores predicted HVPG and separated clinical relevant HVPG thresholds. Plasma Pro-C5 may be suitable for the noninvasive evaluation...

SAS-macros for estimation and prediction in an model of the electricity consumption

DEFF Research Database (Denmark)

1998-01-01

SAS-macros for estimation and prediction in an model of the electricity consumption'' is a large collection of SAS-macros for handling a model of the electricity consumption in the Eastern Denmark. The macros are installed at Elkraft, Ballerup.......SAS-macros for estimation and prediction in an model of the electricity consumption'' is a large collection of SAS-macros for handling a model of the electricity consumption in the Eastern Denmark. The macros are installed at Elkraft, Ballerup....

Fitting polytomous Rasch models in SAS

DEFF Research Database (Denmark)

Christensen, Karl Bang

2006-01-01

The item parameters of a polytomous Rasch model can be estimated using marginal and conditional approaches. This paper describes how this can be done in SAS (V8.2) for three item parameter estimation procedures: marginal maximum likelihood estimation, conditional maximum likelihood estimation, an...

Olev Schults : SAS vajab Estonian Airi rahvusliku lennufirmana / Olev Schults ; interv. Andres Reimer

Index Scriptorium Estoniae

Schults, Olev

2008-01-01

Estonian Airi nõukogu esimees vastab küsimustele, kas SAS arendas Läti airBalticut Estonian SAS-i arvel, mis mõte on rahvuslikul lennukompaniil, kui riik ei tohi seda finantseerida, kuidas mõjutab investorite meeleolu SAS-i Eestis tabanud poliitikute kriitika tulv

Nyheder i SAS Analytics 14.2

DEFF Research Database (Denmark)

Milhøj, Anders

2017-01-01

I november 2016 blev Analytical Produts i den opdaterede version 14.2 sendt på markedet. Denne opdatering indeholder opdateringer af de analytiske programpakker inden for statistik, økonometri, operationsanalyse etc. Disse opdateringer er nu løsrevet fra samtidige opdateringer af det samlede SAS-program...

Data processing and analysis with the autoPROC toolbox

Energy Technology Data Exchange (ETDEWEB)

Vonrhein, Clemens, E-mail: vonrhein@globalphasing.com; Flensburg, Claus; Keller, Peter; Sharff, Andrew; Smart, Oliver; Paciorek, Wlodek; Womack, Thomas; Bricogne, Gérard [Global Phasing Ltd, Sheraton House, Castle Park, Cambridge CB3 0AX (United Kingdom)

2011-04-01

Typical topics and problems encountered during data processing of diffraction experiments are discussed and the tools provided in the autoPROC software are described. A typical diffraction experiment will generate many images and data sets from different crystals in a very short time. This creates a challenge for the high-throughput operation of modern synchrotron beamlines as well as for the subsequent data processing. Novice users in particular may feel overwhelmed by the tables, plots and numbers that the different data-processing programs and software packages present to them. Here, some of the more common problems that a user has to deal with when processing a set of images that will finally make up a processed data set are shown, concentrating on difficulties that may often show up during the first steps along the path of turning the experiment (i.e. data collection) into a model (i.e. interpreted electron density). Difficulties such as unexpected crystal forms, issues in crystal handling and suboptimal choices of data-collection strategies can often be dealt with, or at least diagnosed, by analysing specific data characteristics during processing. In the end, one wants to distinguish problems over which one has no immediate control once the experiment is finished from problems that can be remedied a posteriori. A new software package, autoPROC, is also presented that combines third-party processing programs with new tools and an automated workflow script that is intended to provide users with both guidance and insight into the offline processing of data affected by the difficulties mentioned above, with particular emphasis on the automated treatment of multi-sweep data sets collected on multi-axis goniostats.

Melnās krāsas iespējas interjerā

OpenAIRE

Lapkovska, Ērika

2016-01-01

Diplomdarbā “Melnās krāsas iespējas interjerā”, analizējot pieejamo literatūru, tiek apskatīta melnās krāsas izpratne, nozīme un lietojums vēsturiskā skatījumā, kā arī melnās krāsas izmantojuma principi interjerā. Empīriskajā daļā tiek veikts salīdzinošais pētījums, analizējot dažādus kafejnīcu un bāru interjerus Latvijā un pasaulē, kuros ir melnās krāsas klātbūtne. Diplomdarba apjoms – 75 lpp., kurās iekļauts ievads, 4 nodaļas, 7 apakšnodaļas, literatūras saraksts ar 53 vienībām, 2 pielikum...

Mesures de procédure spéciales et respect des droits de l'homme
Rapport général

OpenAIRE

John A.E. Vervaele

2009-01-01

Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le terrorisme et la criminalité organisée, et de voir si cela a conduit les pays à se départir de leur propres règles fondamentales, procédures, principes et standards des droits de l’homme applicables...

Combination of functional MRI with SAS and MRA

Energy Technology Data Exchange (ETDEWEB)

Sumida, Masayuki; Takeshita, Shinichirou; Kutsuna, Munenori; Akimitsu, Tomohide; Arita, Kazunori; Kurisu, Kaoru [Hiroshima Univ. (Japan). School of Medicine

1999-02-01

For presurgical diagnosis of brain surface, combination of functional MRI (fMRI) with the MR angiography was examined. This method could visualize brain bay, convolution and vein as index of surface. Five normal adults (male, mean age: 28-year-old) and 7 patients with brain tumor on the main locus to surface (male: 4, female: 3, mean age: 52.3-year-old) were studied. fMRI was performed by SPGR method (TR 70, TE 40, flip angle 60, one slice, thickness 10 mm, FOV 20 cm, matrix 128 x 128). The brain surface was visualized by SAS (surface anatomy scanning). SAS was performed by FSE method (TR 6000, TE 200, echo train 16, thickness 20 mm, slice 3, NEX 2). Cortical veins near superior sagittal sinus were visualized by MRA with 2D-TOF method (TR 50, TE 20, flip angle 60, thickness 2 mm, slice 28, NEX 1). These images were superimposed and functional image of peripheral sensorimotor region was evaluated anatomically. In normal adults, high signal was visualized at another side of near sensorimotor region at 8 of 10 sides. All high signal area of fMRI agreed with cortical vein near sensorimotor region that was visualized by MRA. In patients with brain tumor, signal was visualized at another side of sensorimotor region of tumor without 2 cases with palsy. In another side of tumor, signal of fMRI was visualized in 5 of 7 cases. The tumor was visualized as opposite low signal field in SAS. Locational relation between tumor and brain surface and brain function was visualized distinctly by combination of MRA, SAS and MRA. This method could become useful for presurgical diagnosis. (K.H.)

SAS-6 engineering reveals interdependence between cartwheel and microtubules in determining centriole architecture.

Science.gov (United States)

Hilbert, Manuel; Noga, Akira; Frey, Daniel; Hamel, Virginie; Guichard, Paul; Kraatz, Sebastian H W; Pfreundschuh, Moritz; Hosner, Sarah; Flückiger, Isabelle; Jaussi, Rolf; Wieser, Mara M; Thieltges, Katherine M; Deupi, Xavier; Müller, Daniel J; Kammerer, Richard A; Gönczy, Pierre; Hirono, Masafumi; Steinmetz, Michel O

2016-04-01

Centrioles are critical for the formation of centrosomes, cilia and flagella in eukaryotes. They are thought to assemble around a nine-fold symmetric cartwheel structure established by SAS-6 proteins. Here, we have engineered Chlamydomonas reinhardtii SAS-6-based oligomers with symmetries ranging from five- to ten-fold. Expression of a SAS-6 mutant that forms six-fold symmetric cartwheel structures in vitro resulted in cartwheels and centrioles with eight- or nine-fold symmetries in vivo. In combination with Bld10 mutants that weaken cartwheel-microtubule interactions, this SAS-6 mutant produced six- to eight-fold symmetric cartwheels. Concurrently, the microtubule wall maintained eight- and nine-fold symmetries. Expressing SAS-6 with analogous mutations in human cells resulted in nine-fold symmetric centrioles that exhibited impaired length and organization. Together, our data suggest that the self-assembly properties of SAS-6 instruct cartwheel symmetry, and lead us to propose a model in which the cartwheel and the microtubule wall assemble in an interdependent manner to establish the native architecture of centrioles.

Sas-4 proteins are required during basal body duplication in Paramecium

Science.gov (United States)

Gogendeau, Delphine; Hurbain, Ilse; Raposo, Graca; Cohen, Jean; Koll, France; Basto, Renata

2011-01-01

Centrioles and basal bodies are structurally related organelles composed of nine microtubule (MT) triplets. Studies performed in Caenorhabditis elegans embryos have shown that centriole duplication takes place in sequential way, in which different proteins are recruited in a specific order to assemble a procentriole. ZYG-1 initiates centriole duplication by triggering the recruitment of a complex of SAS-5 and SAS-6, which then recruits the final player, SAS-4, to allow the incorporation of MT singlets. It is thought that a similar mechanism (that also involves additional proteins) is present in other animal cells, but it remains to be investigated whether the same players and their ascribed functions are conserved during basal body duplication in cells that exclusively contain basal bodies. To investigate this question, we have used the multiciliated protist Paramecium tetraurelia. Here we show that in the absence of PtSas4, two types of defects in basal body duplication can be identified. In the majority of cases, the germinative disk and cartwheel, the first structures assembled during duplication, are not detected. In addition, if daughter basal bodies were formed, they invariably had defects in MT recruitment. Our results suggest that PtSas4 has a broader function than its animal orthologues. PMID:21289083

SAS-6 assembly templated by the lumen of cartwheel-less centrioles precedes centriole duplication.

Science.gov (United States)

Fong, Chii Shyang; Kim, Minhee; Yang, T Tony; Liao, Jung-Chi; Tsou, Meng-Fu Bryan

2014-07-28

Centrioles are 9-fold symmetric structures duplicating once per cell cycle. Duplication involves self-oligomerization of the centriolar protein SAS-6, but how the 9-fold symmetry is invariantly established remains unclear. Here, we found that SAS-6 assembly can be shaped by preexisting (or mother) centrioles. During S phase, SAS-6 molecules are first recruited to the proximal lumen of the mother centriole, adopting a cartwheel-like organization through interactions with the luminal wall, rather than via their self-oligomerization activity. The removal or release of luminal SAS-6 requires Plk4 and the cartwheel protein STIL. Abolishing either the recruitment or the removal of luminal SAS-6 hinders SAS-6 (or centriole) assembly at the outside wall of mother centrioles. After duplication, the lumen of engaged mother centrioles becomes inaccessible to SAS-6, correlating with a block for reduplication. These results lead to a proposed model that centrioles may duplicate via a template-based process to preserve their geometry and copy number. Copyright © 2014 Elsevier Inc. All rights reserved.

Social Analysis Systems (SAS2) - Phase III

International Development Research Centre (IDRC) Digital Library (Canada)

Scaling Up the International Impact of Action Research : Social Analysis ... up the international impact of action research : SAS phase 3; final technical report ... 000 Canadians abroad to work at the local level on various development issues.

Mesures de procédure spéciales et respect des droits de l'homme Rapport général

NARCIS (Netherlands)

Vervaele, J.A.E.

2009-01-01

Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le

Coupling the System Analysis Module with SAS4A/SASSYS-1

Energy Technology Data Exchange (ETDEWEB)

Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-09-30

SAS4A/SASSYS-1 is a simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced reactors, with an emphasis on sodium fast reactors. SAS4A/SASSYS-1 has been under development and in active use for nearly forty-five years, and is currently maintained by the U.S. Department of Energy under the Office of Advanced Reactor Technology. Although SAS4A/SASSYS-1 contains a very capable primary and intermediate system modeling component, PRIMAR-4, it also has some shortcomings: outdated data management and code structure makes extension of the PRIMAR-4 module somewhat difficult. The user input format for PRIMAR-4 also limits the number of volumes and segments that can be used to describe a given system. The System Analysis Module (SAM) is a fairly new code development effort being carried out under the U.S. DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM is being developed with advanced physical models, numerical methods, and software engineering practices; however, it is currently somewhat limited in the system components and phenomena that can be represented. For example, component models for electromagnetic pumps and multi-layer stratified volumes have not yet been developed. Nor is there support for a balance of plant model. Similarly, system-level phenomena such as control-rod driveline expansion and vessel elongation are not represented. This report documents fiscal year 2016 work that was carried out to couple the transient safety analysis capabilities of SAS4A/SASSYS-1 with the system modeling capabilities of SAM under the joint support of the ART and NEAMS programs. The coupling effort was successful and is demonstrated by evaluating an unprotected loss of flow transient for the Advanced Burner Test Reactor (ABTR) design. There are differences between the stand-alone SAS4A/SASSYS-1 simulations and the coupled SAS/SAM simulations, but these are mainly

Plasma Pro-C3 (N-terminal type III collagen propeptide) predicts fibrosis progression in patients with chronic hepatitis C

DEFF Research Database (Denmark)

Nielsen, Mette J.; Veidal, Sanne S.; Karsdal, Morten A.

2015-01-01

-year. Patients were stratified according to Ishak stages 2-4. Internal cross-validation was performed by bootstrap analysis. RESULTS: Pro-C3 levels were significantly higher in CHC patients in Ishak stage 4 compared to stage 2 (P P ... (stage 4) from mild fibrosis (stage 2/3) (AUC = 0.72, P P = 0.007) levels was observed between the groups of -1, 0, +1 and +2 change in Ishak stage at 12 months. Pro-C3 was significantly increased in group +1 (P = 0.030) and +2 (P = 0...

Implementation of Surface Detector Option in SCALE SAS4 Shielding Module

International Nuclear Information System (INIS)

Broadhead, B.L.; Emmett, M.B.; Tang, J.S.

1999-01-01

The Shielding Analysis Sequence No. 4 (SAS4) in the Standardized Cask Analysis and Licensing Evaluation System (SCALE) is designed to aid the novice user in the preparation of detailed three-dimensional models and radiation protection studies of transportation or storage packages containing spent fuel from a nuclear reactor facility. The underlying methodology in these analyses is the Monte Carlo particle-tracking approach as incorporated into the MORSE-SGC computer code. The use of these basic procedures is enhanced via the automatic generation of the biasing parameters in the SAS4 sequence, which dramatically increases the calculational efficiency of most standard shielding problems. Until recently the primary mechanism for dose estimates in SAS4 was the use of point detectors, which were effective for single-dose locations, but inefficient for quantification of dose-rate profiles. This paper describes the implementation of a new surface detector option for SAS4 with automatic discretization of the detector surface into multiple segments or subdetectors. Results from several sample problems are given and discussed

A new package: MySAS for small angle scattering data analysis

International Nuclear Information System (INIS)

Huang Chaoqiang; Xia Qingzhong; Yan Guanyun; Sun Guang'ai; Chen Bo

2010-01-01

In this paper, A MySAS package, which is verified on Windows XP, can easily convert two-dimensional data in small angle neutron and X-ray scattering analysis, operate individually and execute one particular operation as numerical data reduction or analysis, and graphical visualization. This MySAS package can implement the input and output routines via scanning certain properties, thus recalling completely sets of repetition input and selecting the input files. On starting from the two-dimensional files, the MySAS package can correct the anisotropic or isotropic data for physical interpretation and select the relevant pixels. Over 50 model functions are fitted by the POWELL code using χ 2 as the figure of merit function. (authors)

[A SAS marco program for batch processing of univariate Cox regression analysis for great database].

Science.gov (United States)

Yang, Rendong; Xiong, Jie; Peng, Yangqin; Peng, Xiaoning; Zeng, Xiaomin

2015-02-01

To realize batch processing of univariate Cox regression analysis for great database by SAS marco program. We wrote a SAS macro program, which can filter, integrate, and export P values to Excel by SAS9.2. The program was used for screening survival correlated RNA molecules of ovarian cancer. A SAS marco program could finish the batch processing of univariate Cox regression analysis, the selection and export of the results. The SAS macro program has potential applications in reducing the workload of statistical analysis and providing a basis for batch processing of univariate Cox regression analysis.

The Prospects of SAS Interferometry for Detection and Classification (SAS Interferometrie voor Detectie en Classificatie)

Science.gov (United States)

2008-10-01

DV2008A176 Opdrachtnummer Datum October 2008 Auteur (s) dr. R. van Vossen B.A.J. Quesson dr.ir. J.C. Sabel Rubricering rapport Ongerubriceerd TH9...TNO report | TNO-DV 2008 A176 4/44 Summary This report presents an overview of the theory and implementation of interferometric SAS processing at TNO... theory in software has been tested on two types of data, simulated and measured. Chapter 3 presents results obtained with simulated data; Chapter 4

Procédés de production d'aliments non conventionnels pour porcs à ...

African Journals Online (AJOL)

SARAH

30 juil. 2013 ... CFA, va créer un manque à gagner de 12 à 13 millions de F CFA sur ... mise au point de tels procédés permettrait de créer de la valeur ajoutée ..... Comparaison participatoire de trois méthodes .... chevaux, poissons. Ouvrage ...

SAS- Semantic Annotation Service for Geoscience resources on the web

Science.gov (United States)

Elag, M.; Kumar, P.; Marini, L.; Li, R.; Jiang, P.

2015-12-01

There is a growing need for increased integration across the data and model resources that are disseminated on the web to advance their reuse across different earth science applications. Meaningful reuse of resources requires semantic metadata to realize the semantic web vision for allowing pragmatic linkage and integration among resources. Semantic metadata associates standard metadata with resources to turn them into semantically-enabled resources on the web. However, the lack of a common standardized metadata framework as well as the uncoordinated use of metadata fields across different geo-information systems, has led to a situation in which standards and related Standard Names abound. To address this need, we have designed SAS to provide a bridge between the core ontologies required to annotate resources and information systems in order to enable queries and analysis over annotation from a single environment (web). SAS is one of the services that are provided by the Geosematnic framework, which is a decentralized semantic framework to support the integration between models and data and allow semantically heterogeneous to interact with minimum human intervention. Here we present the design of SAS and demonstrate its application for annotating data and models. First we describe how predicates and their attributes are extracted from standards and ingested in the knowledge-base of the Geosemantic framework. Then we illustrate the application of SAS in annotating data managed by SEAD and annotating simulation models that have web interface. SAS is a step in a broader approach to raise the quality of geoscience data and models that are published on the web and allow users to better search, access, and use of the existing resources based on standard vocabularies that are encoded and published using semantic technologies.

Want independent validation and assurance? Ask for a SAS-70.

Science.gov (United States)

Boutin, Christopher C

2008-08-01

The AICPA's Statement on Auditing Standards No.70, Service Organizations addresses CPA audits of service providers conducted to verify that a provider has adequate controls over its operations. Hospitals should request a SAS-70, the report produced by such an audit, from all of their third-party service providers. SAS-70s can be issued for a specific date or for a six-month period, and they typically consist of three sections: a CPA opinion, a description of controls, and information about the design of the controls.

Performing T-tests to Compare Autocorrelated Time Series Data Collected from Direct-Reading Instruments.

Science.gov (United States)

O'Shaughnessy, Patrick; Cavanaugh, Joseph E

2015-01-01

Industrial hygienists now commonly use direct-reading instruments to evaluate hazards in the workplace. The stored values over time from these instruments constitute a time series of measurements that are often autocorrelated. Given the need to statistically compare two occupational scenarios using values from a direct-reading instrument, a t-test must consider measurement autocorrelation or the resulting test will have a largely inflated type-1 error probability (false rejection of the null hypothesis). A method is described for both the one-sample and two-sample cases which properly adjusts for autocorrelation. This method involves the computation of an "equivalent sample size" that effectively decreases the actual sample size when determining the standard error of the mean for the time series. An example is provided for the one-sample case, and an example is given where a two-sample t-test is conducted for two autocorrelated time series comprised of lognormally distributed measurements.

Vybrané výběrové statistické metody v programu SAS

OpenAIRE

Voříšek, Jan

2009-01-01

In the present work we study methodology of different kinds of sample surveys and their design in SAS software. Creating of SAS Enterprise Guide Add-In was the fundamental creative part of this work. This Add-In enables to compute important statistics of sample surveys, without need of being familiar with SAS code. Add-In was created in MSFT Visual Studio 2003 in C # language using a tamplate for Add-Ins provided by SAS. This work contains a general description of the creation of an Add-In as...

Analysis of metal fuel transient overpower experiments with the SAS4A accident analysis code

International Nuclear Information System (INIS)

Tentner, A.M.; Kalimullah; Miles, K.J.

1990-01-01

The results of the SAS4A analysis of the M7 TREAT Metal fuel experiment are presented. New models incorporated in the metal fuel version of SAS4A are described. The computational results are compared with the experimental observations and this comparison is used in the interpretation of physical phenomena. This analysis was performed using the integrated metal fuel SAS4A version and covers a wide range of events, providing an increased degree of confidence in the SAS4A metal fuel accident analysis capabilities

Mesures de procédure spéciales et respect des droits de l'homme
Rapport général

Directory of Open Access Journals (Sweden)

John A.E. Vervaele

2009-10-01

Full Text Available Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le terrorisme et la criminalité organisée, et de voir si cela a conduit les pays à se départir de leur propres règles fondamentales, procédures, principes et standards des droits de l’homme applicables. Partant de la prémisse qu’un système intégré de droit pénal a trois dimensions – la protection des individus (la dimension de bouclier, la mise à disposition d’instruments d’application de la loi (la dimension d’épée et les contrôles et équilibres c’est-à-dire la séparation des pouvoirs (la dimension constitutionnelle – le rapport fournit un aperçu d’ensemble des transformations corrélées, surtout dans la procédure d’enquête préliminaire, qui les ont affectées toutes les trois dans trois vagues de « guerre » (contre la drogue, le crime organisé et le terrorisme. Dans beaucoup de pays, les garanties procédurales et les principes qui protègent contre la violation du droit à un procès équitable sont considérés comme un fardeau du point de vue de l’efficacité de l’application de la loi à la criminalité grave. Ces réformes se sont traduites par une claire extension de l’état répressif et un estompement des distinctions classiques, et ne favorisent pas la primauté du droit. La focalisation sur la sécurité publique et les investigations contraignantes préventives sapent le système de justice pénale. Avec l’usage croissant du système de justice criminelle comme instrument de régulation du présent et/ou de l’avenir plutôt que de sanction d’un comportement passé, et un procès pénal dans lequel l’enquête préliminaire ne concerne pas la recherche de la v

Adaptation of XMM-Newton SAS to GRID and VO architectures via web

Science.gov (United States)

Ibarra, A.; de La Calle, I.; Gabriel, C.; Salgado, J.; Osuna, P.

2008-10-01

The XMM-Newton Scientific Analysis Software (SAS) is a robust software that has allowed users to produce good scientific results since the beginning of the mission. This has been possible given the SAS capability to evolve with the advent of new technologies and adapt to the needs of the scientific community. The prototype of the Remote Interface for Science Analysis (RISA) presented here, is one such example, which provides remote analysis of XMM-Newton data with access to all the existing SAS functionality, while making use of GRID computing technology. This new technology has recently emerged within the astrophysical community to tackle the ever lasting problem of computer power for the reduction of large amounts of data.

Airbus A320 NEO Base Maintenance Concept SAS Operations

OpenAIRE

Dafgård, Oscar

2017-01-01

Detta arbete har utförts tillsammans med SAS, för att undersöka om ett base maintenance koncept med ett intervall på 36 månader skulle vara mer kostnadseffektivt än 24 månader för deras nya Airbus A320 NEO flotta. SAS, precis som alla andra flygbolag utnyttjar sina flygplan på sina egna och specifika vis. Eftersom inga flygbolag opererar på samma sätt kan inte heller underhållet skötas på samma sätt för en specifik flygplanstyp. Underhållsprogrammet behövde därför ses över för att optimeras g...

SAS tahab Estonian Airi liita lätlaste firmaga airBaltic / Andres Eilart

Index Scriptorium Estoniae

Eilart, Andres

2007-01-01

SAS plaanib Estonian Airi ja Läti firma airBalticu liitmisega luua uue lennufirma. Autori hinnangul viitavad Estonian Airi laienemisplaanidele kriipsu peale tõmbamine ja SAS-i investeeringud airBalticusse sellele, et ühendamise käigus "neelab" Läti firma Estonian Airi

SAS üritab panna riiki lennufirma aktsiaid müüma / Lemmi Kann

Index Scriptorium Estoniae

Kann, Lemmi

2007-01-01

SAS-i eesmärgiks on saada enamusosalus nii Estonian Airis kui ka airBalticus, et seeläbi oma positsioone Baltimaades kinnistada. Diagramm: Estonian Airi majandusnäitajad ja omanikud. Vt. samas: SAS on Estonian Airi jahtinud kaua. Kommenteerib Raivo Vare

A Spreadsheet Tool for Learning the Multiple Regression F-Test, T-Tests, and Multicollinearity

Science.gov (United States)

Martin, David

2008-01-01

This note presents a spreadsheet tool that allows teachers the opportunity to guide students towards answering on their own questions related to the multiple regression F-test, the t-tests, and multicollinearity. The note demonstrates approaches for using the spreadsheet that might be appropriate for three different levels of statistics classes,…

Aging-Resistant Functionalized LDH⁻SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism.

Science.gov (United States)

Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui; Wang, Xin

2018-05-18

With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH⁻SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH⁻SAS composites. Successful preparation of LDH⁻SAS was confirmed by XRD, TGA and FTIR. LDH⁻SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH⁻SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance.

Essentials of Excel, Excel VBA, SAS and Minitab for statistical and financial analyses

CERN Document Server

Lee, Cheng-Few; Chang, Jow-Ran; Tai, Tzu

2016-01-01

This introductory textbook for business statistics teaches statistical analysis and research methods via business case studies and financial data using Excel, MINITAB, and SAS. Every chapter in this textbook engages the reader with data of individual stock, stock indices, options, and futures. One studies and uses statistics to learn how to study, analyze, and understand a data set of particular interest. Some of the more popular statistical programs that have been developed to use statistical and computational methods to analyze data sets are SAS, SPSS, and MINITAB. Of those, we look at MINITAB and SAS in this textbook. One of the main reasons to use MINITAB is that it is the easiest to use among the popular statistical programs. We look at SAS because it is the leading statistical package used in industry. We also utilize the much less costly and ubiquitous Microsoft Excel to do statistical analysis, as the benefits of Excel have become widely recognized in the academic world and its analytical capabilities...

Aging-Resistant Functionalized LDH–SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism

Science.gov (United States)

Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui

2018-01-01

With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH–SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH–SAS composites. Successful preparation of LDH–SAS was confirmed by XRD, TGA and FTIR. LDH–SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH–SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance. PMID:29783656

SAS-1 Is a C2 Domain Protein Critical for Centriole Integrity in C. elegans

Science.gov (United States)

Delattre, Marie; Balestra, Fernando R.; Blanchoud, Simon; Finger, Susanne; Knott, Graham; Müller-Reichert, Thomas; Gönczy, Pierre

2014-01-01

Centrioles are microtubule-based organelles important for the formation of cilia, flagella and centrosomes. Despite progress in understanding the underlying assembly mechanisms, how centriole integrity is ensured is incompletely understood, including in sperm cells, where such integrity is particularly critical. We identified C. elegans sas-1 in a genetic screen as a locus required for bipolar spindle assembly in the early embryo. Our analysis reveals that sperm-derived sas-1 mutant centrioles lose their integrity shortly after fertilization, and that a related defect occurs when maternal sas-1 function is lacking. We establish that sas-1 encodes a C2 domain containing protein that localizes to centrioles in C. elegans, and which can bind and stabilize microtubules when expressed in human cells. Moreover, we uncover that SAS-1 is related to C2CD3, a protein required for complete centriole formation in human cells and affected in a type of oral-facial-digital (OFD) syndrome. PMID:25412110

SAS-1 is a C2 domain protein critical for centriole integrity in C. elegans.

Directory of Open Access Journals (Sweden)

Lukas von Tobel

2014-11-01

Full Text Available Centrioles are microtubule-based organelles important for the formation of cilia, flagella and centrosomes. Despite progress in understanding the underlying assembly mechanisms, how centriole integrity is ensured is incompletely understood, including in sperm cells, where such integrity is particularly critical. We identified C. elegans sas-1 in a genetic screen as a locus required for bipolar spindle assembly in the early embryo. Our analysis reveals that sperm-derived sas-1 mutant centrioles lose their integrity shortly after fertilization, and that a related defect occurs when maternal sas-1 function is lacking. We establish that sas-1 encodes a C2 domain containing protein that localizes to centrioles in C. elegans, and which can bind and stabilize microtubules when expressed in human cells. Moreover, we uncover that SAS-1 is related to C2CD3, a protein required for complete centriole formation in human cells and affected in a type of oral-facial-digital (OFD syndrome.

Anatomy of the TAMA SAS seismic attenuation system

International Nuclear Information System (INIS)

Marka, Szabolcs; Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Wang Chenyang; Yamamoto, Hiroaki; Yoda, Tatsuo

2002-01-01

The TAMA SAS seismic attenuation system was developed to provide the extremely high level of seismic isolation required by the next generation of interferometric gravitational wave detectors to achieve the desired sensitivity at low frequencies. Our aim was to provide good performance at frequencies above ∼10 Hz, while utilizing only passive subsystems in the sensitive frequency band of the TAMA interferometric gravitational wave detectors. The only active feedback is relegated below 6 Hz and it is used to damp the rigid body resonances of the attenuation chain. Simulations, based on subsystem performance characterizations, indicate that the system can achieve rms mirror residual motion measured in a few tens of nanometres. We will give a brief overview of the subsystems and point out some of the characterization results, supporting our claims of achieved performance. SAS is a passive, UHV compatible and low cost system. It is likely that extremely sensitive experiments in other fields will also profit from our study

Ambiguities and completeness of SAS data analysis: investigations of apoferritin by SAXS/SANS EID and SEC-SAXS methods

Science.gov (United States)

Zabelskii, D. V.; Vlasov, A. V.; Ryzhykau, Yu L.; Murugova, T. N.; Brennich, M.; Soloviov, D. V.; Ivankov, O. I.; Borshchevskiy, V. I.; Mishin, A. V.; Rogachev, A. V.; Round, A.; Dencher, N. A.; Büldt, G.; Gordeliy, V. I.; Kuklin, A. I.

2018-03-01

The method of small angle scattering (SAS) is widely used in the field of biophysical research of proteins in aqueous solutions. Obtaining low-resolution structure of proteins is still a highly valuable method despite the advances in high-resolution methods such as X-ray diffraction, cryo-EM etc. SAS offers the unique possibility to obtain structural information under conditions close to those of functional assays, i.e. in solution, without different additives, in the mg/mL concentration range. SAS method has a long history, but there are still many uncertainties related to data treatment. We compared 1D SAS profiles of apoferritin obtained by X-ray diffraction (XRD) and SAS methods. It is shown that SAS curves for X-ray diffraction crystallographic structure of apoferritin differ more significantly than it might be expected due to the resolution of the SAS instrument. Extrapolation to infinite dilution (EID) method does not sufficiently exclude dimerization and oligomerization effects and therefore could not guarantee total absence of dimers account in the final SAS curve. In this study, we show that EID SAXS, EID SANS and SEC-SAXS methods give complementary results and when they are used all together, it allows obtaining the most accurate results and high confidence from SAS data analysis of proteins.

C-C1-04: How to Win Friends and Influence People with the SAS Output Delivery System

OpenAIRE

Tolbert, William

2010-01-01

Background and Aims: Long-time SAS users remember the days when SAS output was embarrassingly ugly. Version 7 saw the introduction of the Output Delivery System (ODS). ODS has matured into a very capable subsystem that gives users powerful reporting options. This presentation will highlight useful features and outline a macro-based system for handling multiple ODS destinations simultaneously. Nowadays there is no excuse for ugly SAS output! When building reports, SAS users should think about ...

Social Anxiety Scale for Adolescents (SAS-A): Measuring Social Anxiety among Finnish Adolescents

Science.gov (United States)

Ranta, Klaus; Junttila, Niina; Laakkonen, Eero; Uhmavaara, Anni; La Greca, Annette M.; Niemi, Paivi M.

2012-01-01

The aim of this study was to investigate symptoms of social anxiety and the psychometric properties of the "Social Anxiety Scale for Adolescents" (SAS-A) among Finnish adolescents, 13-16 years of age. Study 1 (n = 867) examined the distribution of SAS-A scores according to gender and age, and the internal consistency and factor structure…

SPSS and SAS programming for the testing of mediation models.

Science.gov (United States)

Dudley, William N; Benuzillo, Jose G; Carrico, Mineh S

2004-01-01

Mediation modeling can explain the nature of the relation among three or more variables. In addition, it can be used to show how a variable mediates the relation between levels of intervention and outcome. The Sobel test, developed in 1990, provides a statistical method for determining the influence of a mediator on an intervention or outcome. Although interactive Web-based and stand-alone methods exist for computing the Sobel test, SPSS and SAS programs that automatically run the required regression analyses and computations increase the accessibility of mediation modeling to nursing researchers. To illustrate the utility of the Sobel test and to make this programming available to the Nursing Research audience in both SAS and SPSS. The history, logic, and technical aspects of mediation testing are introduced. The syntax files sobel.sps and sobel.sas, created to automate the computation of the regression analysis and test statistic, are available from the corresponding author. The reported programming allows the user to complete mediation testing with the user's own data in a single-step fashion. A technical manual included with the programming provides instruction on program use and interpretation of the output. Mediation modeling is a useful tool for describing the relation between three or more variables. Programming and manuals for using this model are made available.

Clinical SAS programming in India: A study of industry needs versus wants

Directory of Open Access Journals (Sweden)

Nithiyanandhan Ananthakrishnan

2014-01-01

Full Text Available Background: The clinical SAS (www.sas.com programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. Aim: This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Settings and Design: Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Materials and Methods: Two surveys were created in www.surveymonkey.com. Management: https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Statistical Analysis Used: Bar chart and pie chart used on data collect to show segmentation of data. Results and Conclusions: In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

The SAS4A/SASSYS-1 Safety Analysis Code System, Version 5

Energy Technology Data Exchange (ETDEWEB)

Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Brunett, A. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Sumner, T. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-01-01

The SAS4A/SASSYS-1 computer code is developed by Argonne National Laboratory for thermal, hydraulic, and neutronic analysis of power and flow transients in liquidmetal- cooled nuclear reactors (LMRs). SAS4A was developed to analyze severe core disruption accidents with coolant boiling and fuel melting and relocation, initiated by a very low probability coincidence of an accident precursor and failure of one or more safety systems. SASSYS-1, originally developed to address loss-of-decay-heat-removal accidents, has evolved into a tool for margin assessment in design basis accident (DBA) analysis and for consequence assessment in beyond-design-basis accident (BDBA) analysis. SAS4A contains detailed, mechanistic models of transient thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, its coolant, fuel elements, and structural members to accident conditions. The core channel models in SAS4A provide the capability to analyze the initial phase of core disruptive accidents, through coolant heat-up and boiling, fuel element failure, and fuel melting and relocation. Originally developed to analyze oxide fuel clad with stainless steel, the models in SAS4A have been extended and specialized to metallic fuel with advanced alloy cladding. SASSYS-1 provides the capability to perform a detailed thermal/hydraulic simulation of the primary and secondary sodium coolant circuits and the balance-ofplant steam/water circuit. These sodium and steam circuit models include component models for heat exchangers, pumps, valves, turbines, and condensers, and thermal/hydraulic models of pipes and plena. SASSYS-1 also contains a plant protection and control system modeling capability, which provides digital representations of reactor, pump, and valve controllers and their response to input signal changes.

Clinical SAS programming in India: A study of industry needs versus wants.

Science.gov (United States)

Ananthakrishnan, Nithiyanandhan

2014-07-01

The clinical SAS (www.sas.com) programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Two surveys were created in www.surveymonkey.com. https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Bar chart and pie chart used on data collect to show segmentation of data. In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

Validation of the metal fuel version of the SAS4A accident analysis code

International Nuclear Information System (INIS)

Tentner, A.M.

1991-01-01

This paper describes recent work directed towards the validation of the metal fuel version of the SAS4A accident analysis code. The SAS4A code system has been developed at Argonne National Laboratory for the simulation of hypothetical severe accidents in Liquid Metal-Cooled Reactors (LMR), designed to operate in a fast neutron spectrum. SAS4A was initially developed for the analysis of oxide-fueled liquid metal-cooled reactors and has played an important role in the simulation and assessment of the energetics potential for postulated severe accidents in these reactors. Due to the current interest in the metal-fueled liquid metal-cooled reactors, a metal fuel version of the SAS4A accident analysis code is being developed in the Integral Fast Reactor program at Argonne. During such postulated accident scenarios as the unprotected (i.e. without scram) loss-of-flow and transient overpower events, a large number of interrelated physical phenomena occur during a relatively short time. These phenomena include transient heat transfer and hydrodynamic events, coolant boiling, and fuel and cladding melting and relocation. Due to strong neutronic feedbacks these events can significantly influence the reactor power history in the accident progression. The paper presents the results of a recent SAS4A simulation of the M7 TREAT experiment. 6 refs., 5 figs

CTTITEM: SAS macro and SPSS syntax for classical item analysis.

Science.gov (United States)

Lei, Pui-Wa; Wu, Qiong

2007-08-01

This article describes the functions of a SAS macro and an SPSS syntax that produce common statistics for conventional item analysis including Cronbach's alpha, item difficulty index (p-value or item mean), and item discrimination indices (D-index, point biserial and biserial correlations for dichotomous items and item-total correlation for polytomous items). These programs represent an improvement over the existing SAS and SPSS item analysis routines in terms of completeness and user-friendliness. To promote routine evaluations of item qualities in instrument development of any scale, the programs are available at no charge for interested users. The program codes along with a brief user's manual that contains instructions and examples are downloadable from suen.ed.psu.edu/-pwlei/plei.htm.

Centriolar SAS-7 acts upstream of SPD-2 to regulate centriole assembly and pericentriolar material formation

Science.gov (United States)

Sugioka, Kenji; Hamill, Danielle R; Lowry, Joshua B; McNeely, Marie E; Enrick, Molly; Richter, Alyssa C; Kiebler, Lauren E; Priess, James R; Bowerman, Bruce

2017-01-01

The centriole/basal body is a eukaryotic organelle that plays essential roles in cell division and signaling. Among five known core centriole proteins, SPD-2/Cep192 is the first recruited to the site of daughter centriole formation and regulates the centriolar localization of the other components in C. elegans and in humans. However, the molecular basis for SPD-2 centriolar localization remains unknown. Here, we describe a new centriole component, the coiled-coil protein SAS-7, as a regulator of centriole duplication, assembly and elongation. Intriguingly, our genetic data suggest that SAS-7 is required for daughter centrioles to become competent for duplication, and for mother centrioles to maintain this competence. We also show that SAS-7 binds SPD-2 and regulates SPD-2 centriolar recruitment, while SAS-7 centriolar localization is SPD-2-independent. Furthermore, pericentriolar material (PCM) formation is abnormal in sas-7 mutants, and the PCM-dependent induction of cell polarity that defines the anterior-posterior body axis frequently fails. We conclude that SAS-7 functions at the earliest step in centriole duplication yet identified and plays important roles in the orchestration of centriole and PCM assembly. DOI: http://dx.doi.org/10.7554/eLife.20353.001 PMID:28092264

Archive of Census Related Products (ACRP): 1980 SAS Transport Files

Data.gov (United States)

National Aeronautics and Space Administration — The 1980 SAS Transport Files portion of the Archive of Census Related Products (ACRP) contains housing and population demographics from the 1980 Summary Tape File...

%HPGLIMMIX: A High-Performance SAS Macro for GLMM Estimation

Directory of Open Access Journals (Sweden)

Liang Xie

2014-06-01

Full Text Available Generalized linear mixed models (GLMMs comprise a class of widely used statistical tools for data analysis with fixed and random effects when the response variable has a conditional distribution in the exponential family. GLMM analysis also has a close relationship with actuarial credibility theory. While readily available programs such as the GLIMMIX procedure in SAS and the lme4 package in R are powerful tools for using this class of models, these progarms are not able to handle models with thousands of levels of fixed and random effects. By using sparse-matrix and other high performance techniques, procedures such as HPMIXED in SAS can easily fit models with thousands of factor levels, but only for normally distributed response variables. In this paper, we present the %HPGLIMMIX SAS macro that fits GLMMs with large number of sparsely populated design matrices using the doubly-iterative linearization (pseudo-likelihood method, in which the sparse-matrix-based HPMIXED is used for the inner iterations with the pseudo-variable constructed from the inverse-link function and the chosen model. Although the macro does not have the full functionality of the GLIMMIX procedure, time and memory savings can be large with the new macro. In applications in which design matrices contain many zeros and there are hundreds or thousands of factor levels, models can be fitted without exhausting computer memory, and 90% or better reduction in running time can be observed. Examples with a Poisson, binomial, and gamma conditional distribution are presented to demonstrate the usage and efficiency of this macro.

The Development of Student’s Activity Sheets (SAS) Based on Multiple Intelligences and Problem-Solving Skills Using Simple Science Tools

Science.gov (United States)

Wardani, D. S.; Kirana, T.; Ibrahim, M.

2018-01-01

The aim of this research is to produce SAS based on MI and problem-solving skills using simple science tools that are suitable to be used by elementary school students. The feasibility of SAS is evaluated based on its validity, practicality, and effectiveness. The completion Lesson Plan (LP) implementation and student’s activities are the indicators of SAS practicality. The effectiveness of SAS is measured by indicators of increased learning outcomes and problem-solving skills. The development of SAS follows the 4-D (define, design, develop, and disseminate) phase. However, this study was done until the third stage (develop). The written SAS was then validated through expert evaluation done by two experts of science, before its is tested to the target students. The try-out of SAS used one group with pre-test and post-test design. The result of this research shows that SAS is valid with “good” category. In addition, SAS is considered practical as seen from the increase of student activity at each meeting and LP implementation. Moreover, it was considered effective due to the significant difference between pre-test and post-test result of the learning outcomes and problem-solving skill test. Therefore, SAS is feasible to be used in learning.

Effect of hyperbaric oxygen therapy on SAS and SDS in children with ischemic encephalopathy

Directory of Open Access Journals (Sweden)

Pei-Yun Li

2017-08-01

Full Text Available Objective: To study and analyze the effect of early psychological intervention on the scores of SAS and SDS in children with hypoxic-ischemic encephalopathy undergoing hyperbaric oxygen therapy. Methods: A total of 64 children with hypoxic - ischemic encephalopathy enrolled in our hospital from July 2015 to July 2016 and their parents were selected as study subjects. The patients were treated with hyperbaric oxygen therapy, while their parents were given early psychological intervention. By the way of increasing parents’ awareness of the disease, helping parents build confidence in their children’s treatment and encouraging them to participate in daily training for their children to relieve their anxiety and depression. The parents' knowledge of the disease before and during treatment, the treatment of hyperbaric oxygen therapy and the change of SAS and SDS were observed. Results: After effective intervention, the scores of SAS and SDS of 64 patients’ parents were significantly lower than those before treatment. After 1 courses of intervention, the score of SAS was (43.36 ± 1.27 points, and the score of SDS was (45.22 ± 8.13 points. After 2 courses of intervention, the score of SAS was (41.07 ± 1.21 and the score of SDS was (42.35 ± 7.44 points, and parents' awareness of hypoxic-ischemic encephalopathy was significantly increased, and the differences between the two groups were statistically significant. Conclusion: Early psychological intervention on parents of children with hypoxic-ischemic encephalopathy can effectively improve the awareness of parents on the disease, so as to improve their acceptance of hyperbaric oxygen therapy; significantly reduce the parents’ SAS, SDS score. It is beneficial to build a good doctor-patient and nurse-patient relationship, improve the treatment effect and shorten the treatment time.

Modeling developments for the SAS4A and SASSYS computer codes

International Nuclear Information System (INIS)

Cahalan, J.E.; Wei, T.Y.C.

1990-01-01

The SAS4A and SASSYS computer codes are being developed at Argonne National Laboratory for transient analysis of liquid metal cooled reactors. The SAS4A code is designed to analyse severe loss-of-coolant flow and overpower accidents involving coolant boiling, Cladding failures, and fuel melting and relocation. Recent SAS4A modeling developments include extension of the coolant boiling model to treat sudden fission gas release upon pin failure, expansion of the DEFORM fuel behavior model to handle advanced cladding materials and metallic fuel, and addition of metallic fuel modeling capability to the PINACLE and LEVITATE fuel relocation models. The SASSYS code is intended for the analysis of operational and beyond-design-basis transients, and provides a detailed transient thermal and hydraulic simulation of the core, the primary and secondary coolant circuits, and the balance-of-plant, in addition to a detailed model of the plant control and protection systems. Recent SASSYS modeling developments have resulted in detailed representations of the balance of plant piping network and components, including steam generators, feedwater heaters and pumps, and the turbine. 12 refs., 2 tabs

Design and analysis of experiments with SAS

CERN Document Server

Lawson, John

2010-01-01

IntroductionStatistics and Data Collection Beginnings of Statistically Planned Experiments Definitions and Preliminaries Purposes of Experimental Design Types of Experimental Designs Planning Experiments Performing the Experiments Use of SAS SoftwareCompletely Randomized Designs with One Factor Introduction Replication and Randomization A Historical Example Linear Model for Completely Randomized Design (CRD) Verifying Assumptions of the Linear Model Analysis Strategies When Assumptions Are Violated Determining the Number of Replicates Comparison of Treatments after the F-TestFactorial Designs

DIMG92 : un simulateur de formation pour le procédé DIMERSOL Dimg92: a Training Simulator for the Dimersol Process

OpenAIRE

Nica A.; Capelle M.; Galtier F.

2006-01-01

DIMG92 est un simulateur de formation sur le procédé pétrochimique DIMERSOL (procédé IFP de dimérisation du propylène). En simulant le réacteur et ses équipements annexes, les opérateurs s'exercent à conduire l'unité et comprennent les effets des divers paramètres à prendre en compte. Le simulateur est composé de deux logiciels : - Un logiciel de modélisation, basé sur la représentation mathématique de connaissances physico-chimiques et physiques. Aucun empirisme n'est utilisé dans le modèle....

A SAS2H/KENO-V Methodology for 3D Full Core depletion analysis

International Nuclear Information System (INIS)

Milosevic, M.; Greenspan, E.; Vujic, J.; Petrovic, B.

2003-04-01

This paper describes the use of a SAS2H/KENO-V methodology for 3D full core depletion analysis and illustrates its capabilities by applying it to burnup analysis of the IRIS core benchmarks. This new SAS2H/KENO-V sequence combines a 3D Monte Carlo full core calculation of node power distribution and a 1D Wigner-Seitz equivalent cell transport method for independent depletion calculation of each of the nodes. This approach reduces by more than an order of magnitude the time required for getting comparable results using the MOCUP code system. The SAS2H/KENO-V results for the asymmetric IRIS core benchmark are in good agreement with the results of the ALPHA/PHOENIX/ANC code system. (author)

Unsteady Simulations of the Flow in a Channel Flow and a Ventilated Room Using the SST-SAS Model

DEFF Research Database (Denmark)

Davidson, Lars; Nielsen, Peter V.

The SAS model (Scale Adapted Simulation) was invented by Menter and his co-workers. The idea behind the SST-SAS model is to add an additional production term - the SAS term - in the w equation which is sensitive to resolved (i.e. unsteady) fluctuations. In regions where the flow is on the limit...

A Rapid and Inexpensive Bioassay to Evaluate the Decontamination of Organophosphates

Science.gov (United States)

2012-01-01

nition, early attempts at CWA decontamination included washing with soap and water, absorbing with Fuller’s earth, and simply leaving the chemicals to...quires sophisticated instrumental analytical techniques such as liquid or gas chromatography, which involves expensive equipment and trained personnel...Data were analyzed using the PROC ANOVA proce - dure in the SAS 9.2 software (SAS Institute Inc, Cary, NC). The models were used to describe the

PS3-21: Extracting Utilization Data from Clarity into VDW Using Oracle and SAS

Science.gov (United States)

Chimmula, Srivardhan

2013-01-01

Background/Aims The purpose of the presentation is to demonstrate how we use SAS and Oracle to load VDW_Utilization, VDW_DX, and VDW_PX tables from Clarity at the Kaiser Permanente Northern California (KPNC) Division of Research (DOR) site. Methods DOR uses the best of Oracle PL/ SQL and SAS capabilities in building Extract Transform and Load (ETL) processes. These processes extract patient encounter, diagnosis, and procedure data from Teradata-based Clarity. The data is then transformed to fit HMORN’s VDW definitions of the table. This data is then loaded into the Oracle-based VDW table on DOR’s research database and then finally a copy of the table is also created as a SAS dataset. Results DOR builds robust and efficient ETL processes that refresh VDW Utilization table on a monthly basis processing millions of records/observations. The ETL processes have the capability to identify daily changes in Clarity and update the VDW tables on a daily basis. Conclusions KPNC DOR combines the best of both Oracle and SAS worlds to build ETL processes that load the data into VDW Utilization tables efficiently.

Regard d’ensemble sur la codification de la procédure civile

OpenAIRE

Carbonnier, Jean

2014-01-01

M. le Premier Président, merci. Merci M. le Procureur Général, c’est pour moi un très grand honneur. En m’appelant à cette place, vous saviez que la matière que j’avais longuement enseignée à l’université et qui inévitablement, en retour, m’avait imprégné et déformé, la sociologie juridique, me fixait d’emblée à une distance respectable et respectueuse de ce qui devait être le sujet de cette réunion de l’après-midi – savoir, dans une vue d’ensemble, la codification de la procédure civile – ; ...

A SAS-macro for estimation of the cumulative incidence using Poisson regression

DEFF Research Database (Denmark)

Waltoft, Berit Lindum

2009-01-01

the hazard rates, and the hazard rates are often estimated by the Cox regression. This procedure may not be suitable for large studies due to limited computer resources. Instead one uses Poisson regression, which approximates the Cox regression. Rosthøj et al. presented a SAS-macro for the estimation...... of the cumulative incidences based on the Cox regression. I present the functional form of the probabilities and variances when using piecewise constant hazard rates and a SAS-macro for the estimation using Poisson regression. The use of the macro is demonstrated through examples and compared to the macro presented...

SEPARATION ANXIETY SYNDROME (SAS IN DOGS FROM FERNANDOPOLIS, SP, REFERRED TO UNICASTELO VETERINARY HOSPITAL SÍNDROME DA ANSIEDADE DE SEPARAÇÃO (SAS EM CÃES ATENDIDOS NO HOSPITAL VETERINÁRIO DA UNICASTELO, FERNANDÓPOLIS, SP

Directory of Open Access Journals (Sweden)

Adriana Alonso Novais

2010-04-01

Full Text Available The separation anxiety syndrome (SAS is defined by a group of altered behaviors showed by dogs when they are left alone, contributing for the most common behavior problems in this specie. The basic clinical signs of SAS are the following: distress vocalization (whining, barking, howling, destructiveness and house soiling. SAS reduce the animal’s life quality and is a frequent cause of abandonment and euthanasia of these dogs. The goal of this research was to verify the occurrence of SAS in dogs from Fernandopolis, SP, referred to the veterinary hospital of Unicastelo, in the period lying between december/2007 and december/2008. Seventy five animals were studied, comprising 30 (40% adult males, 9 (12% young males, 30 (40% adult females and 6 (8% young females. The dogs were evaluated through data given by the owners, according to a behavior questionnaire. From the general studied population, 35 dogs (47% showed distress vocalization, 29 (39% dogs showed micturition at inappropriate places, 17 (23% dogs showed defecation at inappropriate places and 22 (29% showed destructiveness during the periods of the owner’s absence. From the obtained results we may conclude the occurrence of SAS in 68% of the studied dogs.

KEY WORDS: Dogs, animal behavior, behavior disturbances, SAS.

A síndrome da ansiedade de separação (SAS é definida como o conjunto de comportamentos exibidos por cães quando são deixados sozinhos. É considerada um dos problemas comportamentais mais comuns da espécie. Os sinais clínicos básicos da SAS são vocalização excessiva, destruição de objetos, defecação e micção em locais impróprios, acarretando prejuízos na qualidade de vida dos animais. Sendo uma das causas de abandono e eutanásia desses animais, a SAS foi pesquisada em cães atendidos no Hospital Veterinário da Unicastelo em Fernandópolis, SP, no período de dezembro de 2007 a dezembro de 2008, mediante levantamento realizado em 75

Contrôle et éléments de maîtrise de la contamination par la levure brettanomyces au cours du procédé de vinification en rouge

OpenAIRE

Barbin, Pascal

2006-01-01

Les levures du genre Dekkera/Brettanomyces sont reconnues comme les agents de contamination des vins rouges responsables des défauts phénolés et animaux. Une procédure complète de dépistage et d'isolement a été développée en associant plusieurs critères discriminants. Elle a permis de confirmer la présence du contaminant tout au long du procédé, de la matière première (raisins sur pieds), au produit fini (vin en bouteilles). Des études de terrain, en amont du procédé de vinification ont mis e...

Interpretation of the CABRI LT1 test with SAS4A-code analysis

International Nuclear Information System (INIS)

Sato, Ikken; Onoda, Yu-uichi

2001-03-01

In the CABRI-FAST LT1 test, simulating a ULOF (Unprotected Loss of Flow) accident of LMFBR, pin failure took place rather early during the transient. No fuel melting is expected at this failure because the energy injection was too low and a rapid gas-release-like response leading to coolant-channel voiding was observed. This channel voiding was followed by a gradual fuel breakup and axial relocation. With an aid of SAS4A analysis, interpretation of this test was performed. Although the original SAS4A model was not well fitted to this type of early pin failure, the global behavior after the pin failure was reasonably simulated with temporary modifications. Through this study, gas release behavior from the failed fuel pin and its effect on further transient were well understood. It was also demonstrated that the SAS4A code has a potential to simulate the post-failure behavior initiated by a very early pin failure provided that necessary model modification is given. (author)

Genetic analysis of female fertility traits in South African Holstein cattle

African Journals Online (AJOL)

Bobby

1 ARC-Livestock Business Division, P/Bag X2, Irene 0062, South Africa .... Descriptive statistics of all traits were computed using the Proc Means procedure of the Statistical. Analysis System (SAS ..... of Australian Holstein-Friesian cattle. Anim.

SAS macro programs for geographically weighted generalized linear modeling with spatial point data: applications to health research.

Science.gov (United States)

Chen, Vivian Yi-Ju; Yang, Tse-Chuan

2012-08-01

An increasing interest in exploring spatial non-stationarity has generated several specialized analytic software programs; however, few of these programs can be integrated natively into a well-developed statistical environment such as SAS. We not only developed a set of SAS macro programs to fill this gap, but also expanded the geographically weighted generalized linear modeling (GWGLM) by integrating the strengths of SAS into the GWGLM framework. Three features distinguish our work. First, the macro programs of this study provide more kernel weighting functions than the existing programs. Second, with our codes the users are able to better specify the bandwidth selection process compared to the capabilities of existing programs. Third, the development of the macro programs is fully embedded in the SAS environment, providing great potential for future exploration of complicated spatially varying coefficient models in other disciplines. We provided three empirical examples to illustrate the use of the SAS macro programs and demonstrated the advantages explained above. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The Spectrum Analysis Solution (SAS) System: Theoretical Analysis, Hardware Design and Implementation.

Science.gov (United States)

Narayanan, Ram M; Pooler, Richard K; Martone, Anthony F; Gallagher, Kyle A; Sherbondy, Kelly D

2018-02-22

This paper describes a multichannel super-heterodyne signal analyzer, called the Spectrum Analysis Solution (SAS), which performs multi-purpose spectrum sensing to support spectrally adaptive and cognitive radar applications. The SAS operates from ultrahigh frequency (UHF) to the S-band and features a wideband channel with eight narrowband channels. The wideband channel acts as a monitoring channel that can be used to tune the instantaneous band of the narrowband channels to areas of interest in the spectrum. The data collected from the SAS has been utilized to develop spectrum sensing algorithms for the budding field of spectrum sharing (SS) radar. Bandwidth (BW), average total power, percent occupancy (PO), signal-to-interference-plus-noise ratio (SINR), and power spectral entropy (PSE) have been examined as metrics for the characterization of the spectrum. These metrics are utilized to determine a contiguous optimal sub-band (OSB) for a SS radar transmission in a given spectrum for different modalities. Three OSB algorithms are presented and evaluated: the spectrum sensing multi objective (SS-MO), the spectrum sensing with brute force PSE (SS-BFE), and the spectrum sensing multi-objective with brute force PSE (SS-MO-BFE).

Procédé et dispositif de lombrifiltration pour l'assainissement des eaux usées

OpenAIRE

DUCLOS, Lucie; FILLIT, Fabien; SOTO, Patricio; BRUNEAU, Denis

2013-01-01

L'objet de l'invention est un dispositif de lombrifiltration pour l'assainissement des eaux usées, dans une habitation individuelle comprenant un lombrifiltre (18) ainsi que des moyens (16) de prétraitement par réduction des dimensions des particules solides des effluents eaux usées, des moyens (20) de post-traitement et une sortie (22) des eaux claires. L'invention couvre également le procédé associé.

Coupled MCNP - SAS-SFR calculations for sodium fast reactor core at steady-state - 15460

International Nuclear Information System (INIS)

Ponomarev, A.; Travleev, A.; Pfrang, W.; Sanchez, V.

2015-01-01

The prediction of core parameters at steady state is the first step when studying core accident transient behaviour. At this step thermal hydraulics (TH) and core geometry parameters are calculated corresponding to initial operating conditions. In this study we present the coupling of the SAS-SFR code to the Monte-Carlo neutron transport code MCNP at steady state together with application to the European Sodium Fast Reactor (ESFR). The SAS-SFR code employs a multi-channel core representation where each channel represents subassemblies with similar power, thermal-hydraulics and pin mechanics conditions. For every axial node of every channel the individual geometry and material compositions parameters are calculated in accord with power and cooling conditions. This requires supplying the SAS-SFR-code with nodal power values which should be calculated by neutron physics code with given realistic core parameters. In the conventional approach the neutron physics model employs some core averaged TH and geometry data (fuel temperature, coolant density, core axial and radial expansion). In this study we organize a new approach coupling the MCNP neutron physics models and the SAS-SFR models, so that calculations of power can be improved by using distributed core parameters (TH and geometry) taken from SAS-SFR. The MCNP code is capable to describe cores with distributed TH parameters and even to model non-uniform axial expansion of fuel subassemblies. In this way, core TH and geometrical data calculated by SAS-SFR are taken into account accurately in the neutronics model. The coupling implementation is done by data exchange between two codes with help of processing routines managed by driver routine. Currently it is model-specific and realized for the ESFR 'Reference Oxide' core. The Beginning-Of-Life core state is considered with 10 channel representation for fuel subassemblies. For this model several sets of coupled calculations are performed, in which different

SAS6-like protein in Plasmodium indicates that conoid-associated apical complex proteins persist in invasive stages within the mosquito vector.

Science.gov (United States)

Wall, Richard J; Roques, Magali; Katris, Nicholas J; Koreny, Ludek; Stanway, Rebecca R; Brady, Declan; Waller, Ross F; Tewari, Rita

2016-06-24

The SAS6-like (SAS6L) protein, a truncated paralogue of the ubiquitous basal body/centriole protein SAS6, has been characterised recently as a flagellum protein in trypanosomatids, but associated with the conoid in apicomplexan Toxoplasma. The conoid has been suggested to derive from flagella parts, but is thought to have been lost from some apicomplexans including the malaria-causing genus Plasmodium. Presence of SAS6L in Plasmodium, therefore, suggested a possible role in flagella assembly in male gametes, the only flagellated stage. Here, we have studied the expression and role of SAS6L throughout the Plasmodium life cycle using the rodent malaria model P. berghei. Contrary to a hypothesised role in flagella, SAS6L was absent during gamete flagellum formation. Instead, SAS6L was restricted to the apical complex in ookinetes and sporozoites, the extracellular invasive stages that develop within the mosquito vector. In these stages SAS6L forms an apical ring, as we show is also the case in Toxoplasma tachyzoites. The SAS6L ring was not apparent in blood-stage invasive merozoites, indicating that the apical complex is differentiated between the different invasive forms. Overall this study indicates that a conoid-associated apical complex protein and ring structure is persistent in Plasmodium in a stage-specific manner.

Síndrome de apnea del sueño (SAS Sleep apnea syndrome

Directory of Open Access Journals (Sweden)

Camilo José Borrego Abello

1994-03-01

Full Text Available Se describe el síndrome de apnea del sueño (SAS abarcando los aspectos históricos, signos y síntomas, las diversas modalidades (apneas obstructiva, central y mixta, complicaciones, principalmente cardiovasculares y cerebrovasculares y formas de tratamiento. Se hace énfasis en la ayuda diagnóstica del polisomnograma que ha permitido definir como SAS síntomas antes considerados inespecíficos y cuantificar su gravedad. Se describen las diversas medidas terapéuticas, locales y generales, recalcando los beneficios que se obtienen con la aplicación de los aparatos de respiración a presión positiva. Estos permiten tratamientos no invasivos que hacen desaparecer la totalidad de los síntomas y evitan los riesgos incrementados de trastornos cardiovasculares y accidentes laborales o de tránsito. Este grave síndrome afecta a un grupo grande de población por lo que su importancia es indudable.

Different aspects of the sleep apnea síndrome (SAS are described, including history, clinical manifestations, clinical forms (obstructive, central and mixed, cardiovascular, cerebrovascular and other complications and treatment. With the use of the polysomnogram it has been possible to define non-specific symptoms as due to SAS and to quantitate their seriousness. Different therapeutic approaches are described, both local and systemic, with emphasis on the benefits obtained from the use of positive pressure breathing machines which control every manifestation of the syndrome and avoid the increased cardiovascular risks aswell as work and traffic accidents. This syndrome is important in terms of frequency and of increased death risk.

De novo centriole formation in human cells is error-prone and does not require SAS-6 self-assembly.

Science.gov (United States)

Wang, Won-Jing; Acehan, Devrim; Kao, Chien-Han; Jane, Wann-Neng; Uryu, Kunihiro; Tsou, Meng-Fu Bryan

2015-11-26

Vertebrate centrioles normally propagate through duplication, but in the absence of preexisting centrioles, de novo synthesis can occur. Consistently, centriole formation is thought to strictly rely on self-assembly, involving self-oligomerization of the centriolar protein SAS-6. Here, through reconstitution of de novo synthesis in human cells, we surprisingly found that normal looking centrioles capable of duplication and ciliation can arise in the absence of SAS-6 self-oligomerization. Moreover, whereas canonically duplicated centrioles always form correctly, de novo centrioles are prone to structural errors, even in the presence of SAS-6 self-oligomerization. These results indicate that centriole biogenesis does not strictly depend on SAS-6 self-assembly, and may require preexisting centrioles to ensure structural accuracy, fundamentally deviating from the current paradigm.

Diagnòstics d'infermeria vinculats al procés migratori: visió dels inmigrants

OpenAIRE

Rifà i Ros, Maria Rosa

2012-01-01

L’objectiu general d’aquesta investigació pretén identificar els diagnòstics d’infermeria NANDA predominants en la població immigrant, vinculats al procés migratori i està emmarcada en el Model de Competència Cultural de Purnell i en el model Outcome Present State Test (OPT) de raonament clínic de Pesut i Herman. Tenint en compte els objectius d’aquesta recerca, aquesta s’aborda des del paradigma qualitatiu i seguint les propostes de la investigació fenomenològica que busca descobrir els s...

PREFACE Proceedings of the XIV International Conference on Small-Angle Scattering, SAS-2009

Science.gov (United States)

King, Stephen; Terrill, Nicholas

2010-10-01

The XIV International Conference on Small-Angle Scattering, SAS-2009, was held in Oxford UK, 13-18 September 2009, and was jointly organised under the auspices of the International Union of Crystallography Commission on SAS by a team from the Diamond Light Source and the ISIS Pulsed Neutron Source - their first such joint venture - with help from the UK Science and Technology Facilities Council. It was the first time that this long running and successful series of conferences on the application, science and technology of small-angle scattering techniques had been staged in the UK. The UK has a proud heritage in small-angle scattering: as home to one of the world's first SANS instruments (at AERE Harwell), as the site of the world's first 2nd generation X-ray Synchrotron (the SRS at Daresbury with its suite of SAXS beamlines), and latterly as the location of the world's most successful pulsed source SANS instrument. Indeed, 2009 also marked the 25th Anniversary of neutron operations at ISIS and the opening of a Second Target Station. Whilst the SRS ceased operations in 2008, its mantle has been inherited by the Diamond synchrotron. Many delegates took the opportunity to visit both Diamond and ISIS during a conference excursion. Despite the prevailing global economic downturn, we were delighted that 434 delegates from 32 different countries were able to attend SAS-2009; two-thirds were drawn from the UK, Germany, Japan, the USA and France, but there were also sizeable contingents from Australia, Korea, Taiwan and South America. In many ways this geographical spread reflects the present and emerging distribution, respectively, of 3rd generation X-ray synchrotrons and high-flux neutron sources, although the scope of the conference was not solely limited to these probes. Financial support from the IUCr enabled us to grant bursaries to attend SAS-2009 to 12 delegates from emerging countries (Algeria, Argentina, Brazil, India, Nepal, Romania, Russia and the Ukraine). The

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.

1985-01-01

SAS4A is a new code system which has been designed for analyzing the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modeling the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel motion experiment analyses are also presented

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.; Kalimullah; Hill, D.J.

1986-01-01

The SAS4A code system has been designed for the analysis of the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modelong the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel relocation are emphasized. 12 refs

Repositioning the substrate activity screening (SAS) approach as a fragment-based method for identification of weak binders.

Science.gov (United States)

Gladysz, Rafaela; Cleenewerck, Matthias; Joossens, Jurgen; Lambeir, Anne-Marie; Augustyns, Koen; Van der Veken, Pieter

2014-10-13

Fragment-based drug discovery (FBDD) has evolved into an established approach for "hit" identification. Typically, most applications of FBDD depend on specialised cost- and time-intensive biophysical techniques. The substrate activity screening (SAS) approach has been proposed as a relatively cheap and straightforward alternative for identification of fragments for enzyme inhibitors. We have investigated SAS for the discovery of inhibitors of oncology target urokinase (uPA). Although our results support the key hypotheses of SAS, we also encountered a number of unreported limitations. In response, we propose an efficient modified methodology: "MSAS" (modified substrate activity screening). MSAS circumvents the limitations of SAS and broadens its scope by providing additional fragments and more coherent SAR data. As well as presenting and validating MSAS, this study expands existing SAR knowledge for the S1 pocket of uPA and reports new reversible and irreversible uPA inhibitor scaffolds. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Embedding SAS approach into conjugate gradient algorithms for asymmetric 3D elasticity problems

Energy Technology Data Exchange (ETDEWEB)

Chen, Hsin-Chu; Warsi, N.A. [Clark Atlanta Univ., GA (United States); Sameh, A. [Univ. of Minnesota, Minneapolis, MN (United States)

1996-12-31

In this paper, we present two strategies to embed the SAS (symmetric-and-antisymmetric) scheme into conjugate gradient (CG) algorithms to make solving 3D elasticity problems, with or without global reflexive symmetry, more efficient. The SAS approach is physically a domain decomposition scheme that takes advantage of reflexive symmetry of discretized physical problems, and algebraically a matrix transformation method that exploits special reflexivity properties of the matrix resulting from discretization. In addition to offering large-grain parallelism, which is valuable in a multiprocessing environment, the SAS scheme also has the potential for reducing arithmetic operations in the numerical solution of a reasonably wide class of scientific and engineering problems. This approach can be applied directly to problems that have global reflexive symmetry, yielding smaller and independent subproblems to solve, or indirectly to problems with partial symmetry, resulting in loosely coupled subproblems. The decomposition is achieved by separating the reflexive subspace from the antireflexive one, possessed by a special class of matrices A, A {element_of} C{sup n x n} that satisfy the relation A = PAP where P is a reflection matrix (symmetric signed permutation matrix).

Agent Based Model in SAS Environment for Rail Transit System Alignment Determination

Directory of Open Access Journals (Sweden)

I Made Indradjaja Brunner

2018-04-01

Full Text Available Transit system had been proposed for the urban area of Honolulu. One consideration to be determined is the alignment of the transit system. Decision to set the transit alignment will have influences on which areas will be served, who will be benefiting, as well as who will be impacted. Inputs for the decision usually conducted through public meetings, where community members are shown numbers of maps with pre-set routes. That approach could lead to a rather subjective decision by the community members. This paper attempts to discuss the utilization of grid map in determining the best alignment for rail transit system in Honolulu, Hawaii. It tries to use a more objective approach using various data derived from thematic maps. Overlaid maps are aggregated into a uniform 0.1-square mile vector based grid map system in GIS environment. The large dataset in the GIS environment is analyzed and manipulated using SAS software. The SAS procedure is applied to select the location of the alignment using a rational and deterministic approach. Grid cells that are superior compared to the others are selected based on several predefined criteria. Location of the dominant cells indicates possible transit alignment. The SAS procedure is designed to allow a transient vector called the GUIDE (Grid Unit with Intelligent Directional Expertise agent to analyze several cells at its vicinity and to move towards a cell with the highest value. Each time the agent landed on a cell, it left a mark. The chain of those marks shows location for the transit alignment. This study shows that the combination of ArcGIS and SAS allows a robust analysis of spatial data and manipulation of its datasets, which can be used to run a simulation mimicking the Agent-Based Modelling. This study also opens up further study possibilities by increasing number of factors analyzed by the agent, as well as creating a composite value of multi-factors.

Download this PDF file

African Journals Online (AJOL)

Statistical analysis of the results was performed on SAS 9.2, Microsoft ... are significant) using the t-test, Fisher's exact test and the simple linear regression test. .... This is supported by both the t-test (Table 1) and linear regression analysis.

Escala de sociotropía-autonomía (SAS: propiedades psicométricas de la adaptación a Colombia

Directory of Open Access Journals (Sweden)

Ronald Alberto Toro Tobar

2014-07-01

Full Text Available Este artículo presenta los resultados de una investigación cuyo objetivo fue adaptar y validar la Escala de Sociotropía-Autonomía (SAS de Clark & Beck, la cual evalúa dos dimensiones de personalidad cognitiva: la orientación interpersonal y actitudes de logro y metas personales. La muestra consistió en 460 participantes entre 15 y 71 años, escolarizados de distintos estratos socioeconómicos. Los resultados mostraron índices de consistencia interna en la Escala SAS: total (,85, SAS Sociotropía (,82 y menores para SAS autonomía (,61. Estos resultados guardan relación con investigaciones acerca de este instrumento; por lo tanto se considera confiable y válido para el contexto sociocultural; además podría apoyar la investigación en psicoterapia cognitiva y en procesos clínicos basados en el modelo diátesis estrés. Abstract This paper presents the results of a study whose aim was adapt and validate the Sociotropy-Autonomy Scale (SAS Clark & Beck. This scale assesses two dimensions of cognitive personality: interpersonal orientation and attitudes of achievement and personal goals. The sample consisted of 460 participants between 15 and 71 years enrolled from different socioeconomic levels. The results showed internal consistency in SAS Scale: Total (.85, SAS Sociotropy (.82 and lower for SAS Autonomy (.61. These results are relevant to research on this instrument. It is considered a reliable and valid instrument for socio-cultural context; could also support research in cognitive psychotherapy and clinical processes based on the diathesis stress model.

Confirmatory factor analysis and sample invariance of the Chinese version of Somatosensory Amplification Scale (ChSAS) among Chinese adolescents

OpenAIRE

Tam, B. K.; Wong, W. S.

2011-01-01

Objective: This paper aimed to evaluate the factor structure of the Chinese version of Somatosensory Amplification Scale (ChSAS) in a sample of Chinese adolescents across different grade levels using confirmatory factor analysis (CFA). Methods: A total of 1991 Chinese adolescents completed the ChSAS. CFA assessed the fit of the one-factor model to the entire sample. Factorial invariance of the ChSAS was also examined across grade levels using multigroup CFA. Results: Results of CFA confirmed ...

The School Anxiety Scale-Teacher Report (SAS-TR): translation and psychometric properties of the Iranian version.

Science.gov (United States)

Hajiamini, Zahra; Mohamadi, Ashraf; Ebadi, Abbas; Fathi- Ashtiani, Ali; Tavousi, Mahmoud; Montazeri, Ali

2012-07-18

The School Anxiety Scale-Teacher Report (SAS-TR) was designed to assess anxiety in children at school. The SAS-TR is a proxy rated measure and could assess social anxiety, generalized anxiety and also gives a total anxiety score. This study aimed to translate and validate the SAS-TR in Iran. The translation and cultural adaptation of the original questionnaire were carried out in accordance with the published guidelines. A sample of students participated in the study. Reliability was estimated using internal consistency and test-retest analysis. Validity was assessed using content validity. The factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses. In all 200 elementary students aged 6 to 10 years were studied. Considering the recommended cut-off values, overall the prevalence of high anxiety condition in elementary students was found to be 21 %. Cronbach's alpha coefficient for the Iranian SAS-TR was 0.92 and intraclass correlation coefficient (ICC) was found to be 0.81. The principal component analysis indicated a two-factor structure for the questionnaire (generalized and social anxiety) that jointly accounted for 55.3 % of variances observed. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure of the questionnaire. In general the findings suggest that the Iranian version of SAS-TR has satisfactory reliability, and validity for measuring anxiety in 6 to 10 years old children in Iran. It is simple and easy to use and now can be applied in future studies.

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994

International Nuclear Information System (INIS)

Tveten, U.

1997-02-01

The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the Scandinavian Airline System (SAS). The results presented in this report (radiation doserates for the different types of aircraft in the different years) will, in a later stage of the project, be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for this work is the collection of old SAS time tables found in the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Associations

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994

Energy Technology Data Exchange (ETDEWEB)

Tveten, U.

1997-02-01

The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the Scandinavian Airline System (SAS). The results presented in this report (radiation doserates for the different types of aircraft in the different years) will, in a later stage of the project, be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for this work is the collection of old SAS time tables found in the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Associations.

SAS2: Guide sur la recherche collaborative et l'engagement social

International Development Research Centre (IDRC) Digital Library (Canada)

À l'encontre de cette façon de voir, les SAS2 favorisent l'« ancrage social » et la ..... les organismes communautaires, les médias, les fondations philanthropiques, ...... Portez attention aux différences qui peuvent influencer la manière dont les ...

Propiedades psicom??tricas de la versi??n espa??ola de la Sexual Assertiveness Scale (SAS)

OpenAIRE

Sierra Freire, Juan Carlos; Vallejo-Medina, Pablo; Santos-Iglesias, Pablo

2011-01-01

La asertividad sexual se refiere a la capacidad de las personas para iniciar la actividad sexual, rechazar la actividad sexual no deseada y emplear m??todos anticonceptivos, desarrollando comportamientos saluda- bles. La Sexual Assertiveness Scale (SAS) es una escala de 18 ??tems que eval??a tres dimensiones: Inicio, Rechazo y Prevenci??n Embarazo-ETS (E-ETS). En este estudio 853 personas contestaron la SAS, junto a una bater??a de ins- trumentos afines. La puntuaci??n media de los ??tems ha ...

Genome sequencing and annotation of Proteus sp. SAS71

Directory of Open Access Journals (Sweden)

Samy Selim

2015-12-01

Full Text Available We report draft genome sequence of Proteus sp. strain SAS71, isolated from water spring in Aljouf region, Saudi Arabia. The draft genome size is 3,037,704 bp with a G + C content of 39.3% and contains 6 rRNA sequence (single copies of 5S, 16S & 23S rRNA. The genome sequence can be accessed at DDBJ/EMBL/GenBank under the accession no. LDIU00000000.

The School Anxiety Scale-Teacher Report (SAS-TR: translation and psychometric properties of the Iranian version

Directory of Open Access Journals (Sweden)

Hajiamini Zahra

2012-07-01

Full Text Available Abstract Background The School Anxiety Scale-Teacher Report (SAS-TR was designed to assess anxiety in children at school. The SAS-TR is a proxy rated measure and could assess social anxiety, generalized anxiety and also gives a total anxiety score. This study aimed to translate and validate the SAS-TR in Iran. Methods The translation and cultural adaptation of the original questionnaire were carried out in accordance with the published guidelines. A sample of students participated in the study. Reliability was estimated using internal consistency and test-retest analysis. Validity was assessed using content validity. The factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses. Results In all 200 elementary students aged 6 to 10 years were studied. Considering the recommended cut-off values, overall the prevalence of high anxiety condition in elementary students was found to be 21 %. Cronbach's alpha coefficient for the Iranian SAS-TR was 0.92 and intraclass correlation coefficient (ICC was found to be 0.81. The principal component analysis indicated a two-factor structure for the questionnaire (generalized and social anxiety that jointly accounted for 55.3 % of variances observed. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure of the questionnaire. Conclusion In general the findings suggest that the Iranian version of SAS-TR has satisfactory reliability, and validity for measuring anxiety in 6 to 10 years old children in Iran. It is simple and easy to use and now can be applied in future studies.

Model development of SAS4A and investigation on the initiating phase consequences in LMFRs related with material motion

International Nuclear Information System (INIS)

Niwa, H.

1994-01-01

This paper focuses on an analytical aspect of the initiating phase scenario and consequences of postulated core disruptive accident in liquid-metal-cooled fast breeder reactors. An analytical code, SAS4A, has been developed at Argonne National Laboratory, and introduced to PNC. Improvement and validation effort have been performed for the mixed-oxide version of SAS4A at PNC. This paper describes firstly recent development of SAS4A's material motion related models briefly. A fission gas mass transfer model and solid fuel chunk jamming model are developed and introduced to SAS4A, and validated using CABRI-2 E13 experimental data. Secondly, an investigation of the mechanism of energetics in the initiating phase of an unprotected loss-of-flow accident has identified major control parameters which are intimately related to core design parameters and material motion phenomena. (author)

Categorical Data Analysis With Sas and Spss Applications

CERN Document Server

Lawal, H Bayo

2003-01-01

This book covers the fundamental aspects of categorical data analysis with an emphasis on how to implement the models used in the book using SAS and SPSS. This is accomplished through the frequent use of examples, with relevant codes and instructions, that are closely related to the problems in the text. Concepts are explained in detail so that students can reproduce similar results on their own. Beginning with chapter two, exercises at the end of each chapter further strengthen students' understanding of the concepts by requiring them to apply some of the ideas expressed in the text in a more

A closer look at the effect of preliminary goodness-of-fit testing for normality for the one-sample t-test.

Science.gov (United States)

Rochon, Justine; Kieser, Meinhard

2011-11-01

Student's one-sample t-test is a commonly used method when inference about the population mean is made. As advocated in textbooks and articles, the assumption of normality is often checked by a preliminary goodness-of-fit (GOF) test. In a paper recently published by Schucany and Ng it was shown that, for the uniform distribution, screening of samples by a pretest for normality leads to a more conservative conditional Type I error rate than application of the one-sample t-test without preliminary GOF test. In contrast, for the exponential distribution, the conditional level is even more elevated than the Type I error rate of the t-test without pretest. We examine the reasons behind these characteristics. In a simulation study, samples drawn from the exponential, lognormal, uniform, Student's t-distribution with 2 degrees of freedom (t(2) ) and the standard normal distribution that had passed normality screening, as well as the ingredients of the test statistics calculated from these samples, are investigated. For non-normal distributions, we found that preliminary testing for normality may change the distribution of means and standard deviations of the selected samples as well as the correlation between them (if the underlying distribution is non-symmetric), thus leading to altered distributions of the resulting test statistics. It is shown that for skewed distributions the excess in Type I error rate may be even more pronounced when testing one-sided hypotheses. ©2010 The British Psychological Society.

The Functional Movement Screen and modified Star Excursion Balance Test as predictors of T-test agility performance in university rugby union and netball players.

Science.gov (United States)

Armstrong, Ross; Greig, Matt

2018-05-01

Agility is a functional requirement of many sports, challenging stability, and commonly cited as a mechanism of injury. The Functional Movement Screen (FMS) and modified Star Excursion Balance Test (mSEBT) have equivocally been associated with agility performance. The aim of the current study was to establish a hierarchical ordering of FMS and mSEBT elements in predicting T-test agility performance. Cross-sectional study design. University. Thirty-two female rugby players, 31 male rugby players and 39 female netballers MAIN OUTCOME MEASURES: FMS, mSEBT, T-test performance. The predictive potential of composite FMS and mSEBT scores were weaker than when discrete elements were considered. FMS elements were better predictors of T-test performance in rugby players, whilst mSEBT elements better predicted performance in netballers. Hierarchical modelling highlighted the in-line lunge (ILL) as the primary FMS predictor, whereas mSEBT ordering was limb and sport dependent. The relationship between musculoskeletal screening tools and agility performance was sport-specific. Discrete element scores are advocated over composite scores, and hierarchical ordering of tests might highlight redundancy in screening. The prominence of the ILL in hierarchical modelling might reflect the functional demands of the T-test. Sport-specificity and limb dominance influence hierarchical ordering of musculoskeletal screens. Copyright © 2018 Elsevier Ltd. All rights reserved.

Quality assurance management plan (QAPP) special analytical support (SAS)

Energy Technology Data Exchange (ETDEWEB)

LOCKREM, L.L.

1999-05-20

It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data.

Quality assurance management plan (QAPP) special analytical support (SAS)

International Nuclear Information System (INIS)

LOCKREM, L.L.

1999-01-01

It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data

Comparison of ArcGIS and SAS Geostatistical Analyst to Estimate Population-Weighted Monthly Temperature for US Counties.

Science.gov (United States)

Xiaopeng, Q I; Liang, Wei; Barker, Laurie; Lekiachvili, Akaki; Xingyou, Zhang

Temperature changes are known to have significant impacts on human health. Accurate estimates of population-weighted average monthly air temperature for US counties are needed to evaluate temperature's association with health behaviours and disease, which are sampled or reported at the county level and measured on a monthly-or 30-day-basis. Most reported temperature estimates were calculated using ArcGIS, relatively few used SAS. We compared the performance of geostatistical models to estimate population-weighted average temperature in each month for counties in 48 states using ArcGIS v9.3 and SAS v 9.2 on a CITGO platform. Monthly average temperature for Jan-Dec 2007 and elevation from 5435 weather stations were used to estimate the temperature at county population centroids. County estimates were produced with elevation as a covariate. Performance of models was assessed by comparing adjusted R 2 , mean squared error, root mean squared error, and processing time. Prediction accuracy for split validation was above 90% for 11 months in ArcGIS and all 12 months in SAS. Cokriging in SAS achieved higher prediction accuracy and lower estimation bias as compared to cokriging in ArcGIS. County-level estimates produced by both packages were positively correlated (adjusted R 2 range=0.95 to 0.99); accuracy and precision improved with elevation as a covariate. Both methods from ArcGIS and SAS are reliable for U.S. county-level temperature estimates; However, ArcGIS's merits in spatial data pre-processing and processing time may be important considerations for software selection, especially for multi-year or multi-state projects.

SPSS and SAS programs for comparing Pearson correlations and OLS regression coefficients.

Science.gov (United States)

Weaver, Bruce; Wuensch, Karl L

2013-09-01

Several procedures that use summary data to test hypotheses about Pearson correlations and ordinary least squares regression coefficients have been described in various books and articles. To our knowledge, however, no single resource describes all of the most common tests. Furthermore, many of these tests have not yet been implemented in popular statistical software packages such as SPSS and SAS. In this article, we describe all of the most common tests and provide SPSS and SAS programs to perform them. When they are applicable, our code also computes 100 × (1 - α)% confidence intervals corresponding to the tests. For testing hypotheses about independent regression coefficients, we demonstrate one method that uses summary data and another that uses raw data (i.e., Potthoff analysis). When the raw data are available, the latter method is preferred, because use of summary data entails some loss of precision due to rounding.

WinBUGSio: A SAS Macro for the Remote Execution of WinBUGS

Directory of Open Access Journals (Sweden)

Michael K. Smith

2007-09-01

Full Text Available This is a macro which facilitates remote execution of WinBUGS from within SAS. The macro pre-processes data for WinBUGS, writes the WinBUGS batch-script, executes this script and reads in output statistics from the WinBUGS log-file back into SAS native format. The user specifies the input and output file names and directory path as well as the statistics to be monitored in WinBUGS. The code works best for a model that has already been set up and checked for convergence diagnostics within WinBUGS. An obvious extension of the use of this macro is for running simulations where the input and output files all have the same name but all that differs between simulation iterations is the input dataset. The functionality and syntax of the macro call are described in this paper and illustrated using a simple linear regression model.

Analysis of the OPERA-15 two-dimensional voiding experiment using the SAS4A code

International Nuclear Information System (INIS)

Briggs, L.L.

1984-01-01

Overall, SAS4A appears to do a good job for simulating the OPERA-15 experiment. For most of the experiment parameters, the code calculations compare quite well with the experimental data. The lack of a multi-dimensional voiding model has the effect of extending the flow coastdown time until voiding starts; otherwise, the code simulates the accident progression satisfactorily. These results indicate a need for further work in this area in the form of a tandem analysis by a two-dimensional flow code and a one-dimensional version of that code to confirm the observations derived from the SAS4A analysis

Data Mining Supercomputing with SAS JMP® Genomics

Directory of Open Access Journals (Sweden)

Richard S. Segall

2011-02-01

Full Text Available JMP® Genomics is statistical discovery software that can uncover meaningful patterns in high-throughput genomics and proteomics data. JMP® Genomics is designed for biologists, biostatisticians, statistical geneticists, and those engaged in analyzing the vast stores of data that are common in genomic research (SAS, 2009. Data mining was performed using JMP® Genomics on the two collections of microarray databases available from National Center for Biotechnology Information (NCBI for lung cancer and breast cancer. The Gene Expression Omnibus (GEO of NCBI serves as a public repository for a wide range of highthroughput experimental data, including the two collections of lung cancer and breast cancer that were used for this research. The results for applying data mining using software JMP® Genomics are shown in this paper with numerous screen shots.

Does age matter? Controls on the spatial organization of age and life expectancy in hillslopes, and implications for transport parameterization using rSAS

Science.gov (United States)

Kim, M.; Harman, C. J.; Troch, P. A. A.

2017-12-01

Hillslopes have been extensively explored as a natural fundamental unit for spatially-integrated hydrologic models. Much of this attention has focused on their use in predicting the quantity of discharge, but hillslope-based models can potentially be used to predict the composition of discharge (in terms of age and chemistry) if they can be parameterized terms of measurable physical properties. Here we present advances in the use of rank StorAge Selection (rSAS) functions to parameterize transport through hillslopes. These functions provide a mapping between the distribution of water ages in storage and in outfluxes in terms of a probability distribution over storage. It has previously been shown that rSAS functions are related to the relative partitioning and arrangement of flow pathways (and variabilities in that arrangement), while separating out the effect of changes in the overall rate of fluxes in and out. This suggests that rSAS functions should have a connection to the internal organization of flow paths in a hillslope.Using a combination of numerical modeling and theoretical analysis we examined: first, the controls of physical properties on internal spatial organization of age (time since entry), life expectancy (time to exit), and the emergent transit time distribution and rSAS functions; second, the possible parameterization of the rSAS function using the physical properties. The numerical modeling results showed the clear dependence of the rSAS function forms on the physical properties and relations between the internal organization and the rSAS functions. For the different rates of the exponential saturated hydraulic conductivity decline with depth the spatial organization of life expectancy varied dramatically and determined the rSAS function forms, while the organizaiton of the age showed less qualitative differences. Analytical solutions predicting this spatial organization and the resulting rSAS function were derived for simplified systems. These

Procédé de l'étude de la rupture des fibres à partir d'un essai en ...

African Journals Online (AJOL)

Le travail consiste à solliciter en traction des mèches de fibres de verre, en utilisant l'émission acoustique pour suivre en temps réel l'endommagement du matériau. En effet, les ... Deux types d'essais doivent être réalisés, ceci afin de pouvoir comparer les méthodes et les résultats avec ceux déjà obtenus. La procédure ...

Living Together v. Living Well Together: A Normative Examination of the SAS Case

Directory of Open Access Journals (Sweden)

Lori G. Beaman

2016-04-01

Full Text Available The European Court of Human Rights decision in SAS from France illustrates how a policy and national mantra that ostensibly aims to enhance inclusiveness, ‘living together’, is legally deployed in a manner that may have the opposite effect. In essence, despite acknowledging the sincerity of SAS’s religious practice of wearing the niqab, and her agency in making the decision to do so, the Court focuses on radicalism and women’s oppression amongst Muslims. Taking the notion of living together as the beginning point, the paper explores the normative assumptions underlying this notion as illustrated in the judgment of the Court. An alternative approach, drawing on the work of Derrida for the notion of ‘living well together’ will be proposed and its implications for social inclusion explicated. The paper’s aim is to move beyond the specific example of SAS and France to argue that the SAS pattern of identifying particular values as ‘national values’, the deployment of those values through law, policy and public discourse, and their exclusionary effects is playing out in a number of Western democracies, including Canada, the country with which the author is most familiar. Because of this widespread dissemination of values and their framing as representative of who ‘we’ are, there is a pressing need to consider the potentially alienating effects of a specific manifestation of ‘living together’ and an alternative model of ‘living well together’.

Repeated subretinal surgery and removal of subretinal decalin is well tolerated

DEFF Research Database (Denmark)

Sørensen, Nina Buus; Klemp, Kristian; Kjær, Troels Wesenberg

2017-01-01

flexible tube. Two weeks after removal, a control mfERG was recorded, the pigs were enucleated and sacrificed and eyes were examined histologically. All statistics were carried out with a paired t-test in SAS Enterprise Guide 7.1® (SAS Institute Inc., Cary, NC, USA). RESULTS: There was no significant...

A SAS/AF application to administrate and query a file of incidents occurring in foreign nuclear power plants

International Nuclear Information System (INIS)

Durbec, V.

1994-07-01

The Research and Development Division of Electricite de France has a file of incidents occurring in foreign pressurized water nuclear power stations. These incidents have an impact either on safety or reliability. The file is stored on an IBM 3090. For each incident, a docket is assigned, containing the identity of the nuclear plant and information in the form of code or text on the incident. An application has been built with the SAS System under IBM (MVS) in order to: - allow the input of new nuclear plant identities, monthly operating coefficients and new incidents; - subset data from each SAS data set, according to selection criteria (country, manufacturers, period, materials, etc...) in the form of coded fields and characters strings; -calculate simple statistical analyses on subset data (histograms of break duration, distribution of operating coefficients, cross-tabulation tables of sets and materials which bring about the incident) with a restitution on screen and/or printer; - edit an annual booklet containing general results of functioning of plants. After validation, data retrieved from the database are used in probabilistic safety analysis of nuclear power plants and materials designing studies (comparison with French materials, identification of factors having an impact on performance). The application is an interactive menu-driven tool and contains data entry screens (for new data or selection criteria). These screens have been built with SAS/AF software and Screen Control Language. Data selection and processing have been developed with Base SAS and SAS/GRAPH software. (author). 1 ref., 6 figs., 2 tabs

SAS-4 is recruited to a dynamic structure in newly forming centrioles that is stabilized by the gamma-tubulin-mediated addition of centriolar microtubules.

Science.gov (United States)

Dammermann, Alexander; Maddox, Paul S; Desai, Arshad; Oegema, Karen

2008-02-25

Centrioles are surrounded by pericentriolar material (PCM), which is proposed to promote new centriole assembly by concentrating gamma-tubulin. Here, we quantitatively monitor new centriole assembly in living Caenorhabditis elegans embryos, focusing on the conserved components SAS-4 and SAS-6. We show that SAS-4 and SAS-6 are coordinately recruited to the site of new centriole assembly and reach their maximum levels during S phase. Centriolar SAS-6 is subsequently reduced by a mechanism intrinsic to the early assembly pathway that does not require progression into mitosis. Centriolar SAS-4 remains in dynamic equilibrium with the cytoplasmic pool until late prophase, when it is stably incorporated in a step that requires gamma-tubulin and microtubule assembly. These results indicate that gamma-tubulin in the PCM stabilizes the nascent daughter centriole by promoting microtubule addition to its outer wall. Such a mechanism may help restrict new centriole assembly to the vicinity of preexisting parent centrioles that recruit PCM.

Development and validation of logistic prognostic models by predefined SAS-macros

Directory of Open Access Journals (Sweden)

Ziegler, Christoph

2006-02-01

Full Text Available In medical decision making about therapies or diagnostic procedures in the treatment of patients the prognoses of the course or of the magnitude of diseases plays a relevant role. Beside of the subjective attitude of the clinician mathematical models can help in providing such prognoses. Such models are mostly multivariate regression models. In the case of a dichotomous outcome the logistic model will be applied as the standard model. In this paper we will describe SAS-macros for the development of such a model, for examination of the prognostic performance, and for model validation. The rational for this developmental approach of a prognostic modelling and the description of the macros can only given briefly in this paper. Much more details are given in. These 14 SAS-macros are a tool for setting up the whole process of deriving a prognostic model. Especially the possibility of validating the model by a standardized software tool gives an opportunity, which is not used in general in published prognostic models. Therefore, this can help to develop new models with good prognostic performance for use in medical applications.

Genetic parameters and correlations among linear type traits in the ...

African Journals Online (AJOL)

user

2011-02-28

Feb 28, 2011 ... of Holstein heredity (BLD), respectively. The fixed effect of technician was denoted by TEC, the random effect of animal additive genetic effect and residual effects were shown by A and E, respectively. Each of the fixed effects was investigated via SAS software (proc Generalized Linear Model). In this study,.

Non-linear Growth Models in Mplus and SAS

Science.gov (United States)

Grimm, Kevin J.; Ram, Nilam

2013-01-01

Non-linear growth curves or growth curves that follow a specified non-linear function in time enable researchers to model complex developmental patterns with parameters that are easily interpretable. In this paper we describe how a variety of sigmoid curves can be fit using the Mplus structural modeling program and the non-linear mixed-effects modeling procedure NLMIXED in SAS. Using longitudinal achievement data collected as part of a study examining the effects of preschool instruction on academic gain we illustrate the procedures for fitting growth models of logistic, Gompertz, and Richards functions. Brief notes regarding the practical benefits, limitations, and choices faced in the fitting and estimation of such models are included. PMID:23882134

SPSS and SAS programs for generalizability theory analyses.

Science.gov (United States)

Mushquash, Christopher; O'Connor, Brian P

2006-08-01

The identification and reduction of measurement errors is a major challenge in psychological testing. Most investigators rely solely on classical test theory for assessing reliability, whereas most experts have long recommended using generalizability theory instead. One reason for the common neglect of generalizability theory is the absence of analytic facilities for this purpose in popular statistical software packages. This article provides a brief introduction to generalizability theory, describes easy to use SPSS, SAS, and MATLAB programs for conducting the recommended analyses, and provides an illustrative example, using data (N = 329) for the Rosenberg Self-Esteem Scale. Program output includes variance components, relative and absolute errors and generalizability coefficients, coefficients for D studies, and graphs of D study results.

Design and implementation of reliability evaluation of SAS hard disk based on RAID card

Science.gov (United States)

Ren, Shaohua; Han, Sen

2015-10-01

Because of the huge advantage of RAID technology in storage, it has been widely used. However, the question associated with this technology is that the hard disk based on the RAID card can not be queried by Operating System. Therefore how to read the self-information and log data of hard disk has been a problem, while this data is necessary for reliability test of hard disk. In traditional way, this information can be read just suitable for SATA hard disk, but not for SAS hard disk. In this paper, we provide a method by using LSI RAID card's Application Program Interface, communicating with RAID card and analyzing the feedback data to solve the problem. Then we will get the necessary information to assess the SAS hard disk.

Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

Science.gov (United States)

G.R. Johnson; J.N. King

1998-01-01

Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

Composites reinforcement by rods a SAS study

CERN Document Server

Urban, V; Pyckhout-Hintzen, W; Richter, D; Straube, E

2002-01-01

The mechanical properties of composites are governed by size, shape and dispersion degree of so-called reinforcing particles. Polymeric fillers based on thermodynamically driven microphase separation of block copolymers offer the opportunity to study a model system of controlled rod-like filler particles. We chose a triblock copolymer (PBPSPB) and carried out SAS measurements with both X-rays and neutrons, in order to characterize separately the hard phase and the cross-linked PB matrix. The properties of the material depend strongly on the way that stress is carried and transferred between the soft matrix and the hard fibers. The failure of the strain-amplification concept and the change of topological contributions to the free energy and scattering factor have to be addressed. In this respect the composite shows a similarity to a two-network system, i.e. interpenetrating rubber and rod-like filler networks. (orig.)

A SAS macro for testing differences among three or more independent groups using Kruskal-Wallis and Nemenyi tests.

Science.gov (United States)

Liu, Yuewei; Chen, Weihong

2012-02-01

As a nonparametric method, the Kruskal-Wallis test is widely used to compare three or more independent groups when an ordinal or interval level of data is available, especially when the assumptions of analysis of variance (ANOVA) are not met. If the Kruskal-Wallis statistic is statistically significant, Nemenyi test is an alternative method for further pairwise multiple comparisons to locate the source of significance. Unfortunately, most popular statistical packages do not integrate the Nemenyi test, which is not easy to be calculated by hand. We described the theory and applications of the Kruskal-Wallis and Nemenyi tests, and presented a flexible SAS macro to implement the two tests. The SAS macro was demonstrated by two examples from our cohort study in occupational epidemiology. It provides a useful tool for SAS users to test the differences among three or more independent groups using a nonparametric method.

Adaptation and Validation of the Sexual Assertiveness Scale (SAS) in a Sample of Male Drug Users.

Science.gov (United States)

Vallejo-Medina, Pablo; Sierra, Juan Carlos

2015-04-21

The aim of the present study was to adapt and validate the Sexual Assertiveness Scale (SAS) in a sample of male drug users. A sample of 326 male drug users and 322 non-clinical males was selected by cluster sampling and convenience sampling, respectively. Results showed that the scale had good psychometric properties and adequate internal consistency reliability (Initiation = .66, Refusal = .74 and STD-P = .79). An evaluation of the invariance showed strong factor equivalence between both samples. A high and moderate effect of Differential Item Functioning was only found in items 1 and 14 (∆R 2 Nagelkerke = .076 and .037, respectively). We strongly recommend not using item 1 if the goal is to compare the scores of both groups, otherwise the comparison will be biased. Correlations obtained between the CSFQ-14 and the safe sex ratio and the SAS subscales were significant (CI = 95%) and indicated good concurrent validity. Scores of male drug users were similar to those of non-clinical males. Therefore, the adaptation of the SAS to drug users provides enough guarantees for reliable and valid use in both clinical practice and research, although care should be taken with item 1.

Plan empresa Publitis S.A.S: soluciones tecnológicas

OpenAIRE

Robledo Ceballos, Carlos Alberto; Rodríguez Velasco, Salvador

2011-01-01

RESUMEN: PubliTICs es una empresa de constitución privada creada bajo la reglamentación emitida para las Sociedades por Acciones Simplificadas, cuyo objeto principal es la prestación de servicios de Tecnologías de la Información y las Comunicaciones en el mercado de Colombia. PubliTICs S.A.S celebrará un contrato de Aliado Tecnológico y Comercial con las Empresas Municipales de Cali EMCALI EICE ESP, para prestar servicios de soluciones tecnológicas empresariales, aprovechando la infraestru...

O papel do community manager Toluna SAS: comunidade online interativa

OpenAIRE

Faria, Filipa Maria Ferreira Prego de

2014-01-01

Atualmente, a maioria das empresas encontra-se ligada a uma das ferramentas mais poderosas do mundo: a internet. Com o crescimento deste fenómeno, surgem aplicativos para melhorarem o seu aproveitamento. As empresas começam a usufruir da Web 2.0, que visa a utilização da internet como uma plataforma social. O trabalho aqui apresentado pretende fazer uma análise profunda da empresa online Toluna SAS e explicar o surgimento do profissional responsável por essa plataforma social, o Community Man...

Find the fish: using PROC SQL to build a relational database

Science.gov (United States)

Fabrizio, Mary C.; Nelson, Scott N.

1995-01-01

Reliable estimates of abundance and survival, gained through mark-recapture studies, are necessary to better understand how to manage and restore lake trout populations in the Great Lakes. Working with a 24-year data set from a mark-recapture study conducted in Lake Superior, we attempted to disclose information on tag shedding by examining recaptures of double-tagged fish. The data set consisted of 64,288 observations on fish which had been marked with one or more tags; a subset of these fish had been marked with two tags at initial capture. Although DATA and PROC statements could be used to obtain some of the information we sought, these statements could not be used to extract a complete set of results from the double-tagging experiments. We therefore used SQL processing to create three tables representing the same information but in a fully normalized relational structure. In addition, we created indices to efficiently examine complex relationships among the individual capture records. This approach allowed us to obtain all the information necessary to estimate tag retention through subsequent modeling. We believe that our success with SQL was due in large part to its ability to simultaneosly scan the same table more than once and to permit consideration of other tables in sub-queries.

The IAEA Transport Safety Appraisal Service (TranSAS)

International Nuclear Information System (INIS)

Dicke, G.J.

2004-01-01

Representatives of all Member States of the IAEA meet once a year in September at the General Conference in Vienna, Austria, to consider and approve the Agency's programme and budget and to address matters brought before it by the Board of Governors, the Director General, or Member States. In September 1998 the General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that compliance with regulations that take account of the IAEA Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations) is providing a high level of safety during the transport of radioactive material. Good compliance requires that the regulations are implemented effectively. The General Conference therefore requested the IAEA Secretariat to provide a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request the Director General of the IAEA offered such an appraisal service to all States in letter J1.01.Circ, dated 10 December 1998. The first Transport Safety Appraisal Service (TranSAS) was undertaken and completed at the request of Slovenia in 1999. A report on the results of that appraisal was published and released for general distribution in the early fall of 1999. In each of the General Conferences since 1998, resolutions focused on transport safety have commended the Secretariat for establishing the TranSAS, commended those States that have requested the appraisal service and encouraged other States to avail themselves of this service see GC(43)/RES/11, GC(44)/RES/17, GC(45)/RES/10, GC(46)/RES/9 and GC(47)/RES/7. Six appraisals have been carried out to date as follows: Slovenia, Brazil, United Kingdom, Turkey, Panama and France. This presentation provides an overview of the Transport Safety Appraisal Service and summarizes the major findings from the

The IAEA Transport Safety Appraisal Service (TranSAS)

Energy Technology Data Exchange (ETDEWEB)

Dicke, G.J. [International Atomic Energy Agency, Vienna (Austria)

2004-07-01

Representatives of all Member States of the IAEA meet once a year in September at the General Conference in Vienna, Austria, to consider and approve the Agency's programme and budget and to address matters brought before it by the Board of Governors, the Director General, or Member States. In September 1998 the General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that compliance with regulations that take account of the IAEA Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations) is providing a high level of safety during the transport of radioactive material. Good compliance requires that the regulations are implemented effectively. The General Conference therefore requested the IAEA Secretariat to provide a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request the Director General of the IAEA offered such an appraisal service to all States in letter J1.01.Circ, dated 10 December 1998. The first Transport Safety Appraisal Service (TranSAS) was undertaken and completed at the request of Slovenia in 1999. A report on the results of that appraisal was published and released for general distribution in the early fall of 1999. In each of the General Conferences since 1998, resolutions focused on transport safety have commended the Secretariat for establishing the TranSAS, commended those States that have requested the appraisal service and encouraged other States to avail themselves of this service see GC(43)/RES/11, GC(44)/RES/17, GC(45)/RES/10, GC(46)/RES/9 and GC(47)/RES/7. Six appraisals have been carried out to date as follows: Slovenia, Brazil, United Kingdom, Turkey, Panama and France. This presentation provides an overview of the Transport Safety Appraisal Service and summarizes the major findings from

Modelling the detachment dependence on strike point location in the small angle slot divertor (SAS) with SOLPS

Science.gov (United States)

Casali, Livia; Covele, Brent; Guo, Houyang

2017-10-01

The new Small Angle Slot (SAS) divertor in DIII-D is characterized by a shallow-angle target enclosed by a slot structure about the strike point (SP). SOLPS modelling results of SAS have demonstrated divertor closure's utility in widening the range of acceptable densities for adequate heat handling. An extensive database of runs has been built to study the detachment dependence on SP location in SAS. Density scans show that lower Te at lower upstream density occur when the SP is at the critical location in the slot. The cooling front spreads across the entire target at higher densities, in agreement with experimental Langmuir probe measurements. A localized increase of the atomic and molecular density takes place near the SP, which reduces the target incident power density and facilitates detachment at lower upstream density. Systematic scans of variables such as power, transport, and viscosity have been carried out to assess the detachment sensitivity. Therein, a positive role of the viscosity is found. This work supported by DOE Contract Number DE-FC02-04ER54698.

Identificación de Prácticas Empresariales para el Mejoramiento Continuo en Plusagro S.A.S.

OpenAIRE

Martín Correal, Alvaro Steven

2014-01-01

Este proyecto que se llevara a cabo en la compañía Plusagro S.A.S. la cual busca mejorar de forma sustancial la cultura organizacional de la compañía, para que desarrolle al máximo las ventajas competitivas que encuentra en el mercado, una de estas grandes ventajas es que al tener la exclusividad de su proveedor principal Kursan. Se vuelve de suma importancia saber que existen otras marcas en el mercado de los productos agrícolas que ofrece Plusagro S.A.S. pero se ha encontrado en común acuer...

Determining hyporheic storage using the rSAS model in urban restored streams.

Science.gov (United States)

Stoll, E.; Putnam, S. M.; Cosans, C.; Harman, C. J.

2017-12-01

One aim of stream restoration is to increase the connectivity of the stream with the hyporheic zone, which is important for processes like denitrification. This study analyzed transects of different restoration techniques in an urban stream, Stony Run in Baltimore, Maryland. The extent of the hyporheic zone was determined using a combination of salt slug injection tracer studies to determine the breakthrough curves and the rank StorAge Selection (rSAS) model. Previous studies using salt tracer injections have often focused on the shape of the breakthrough curve and the transit time distributions of streams to infer indicies correlated with hyporheic zone storage. This study uses the rSAS model to determine the volume of storage that must be turning over to produce the breakthrough curve. This study looked at transects of two different restoration techniques, one with floodplain rehabilitation and one without. Both transects had cross vanes and pool and riffle systems and only differed in the steepness of the banks surrounding the stream. The utility and accuracy of rSAS method was found to be heavily dependent on accurate flow rates. To avoid potential skew in the results, normalized, relatively flow rate-independent metric of storage were compared among transects to reduce error resulting from the flow rate. The results suggested that stream water was retained for longer in a larger storage volume in the transect that did not have floodplain rehabilitation. When compared to the storage of a natural stream with similar geomorphologic characteristics, the restored transect without floodplain rehabilitation had a larger storage volume than the natural stream. The restored transect with floodplain rehabilitation not only had a smaller storage volume than the restored section without rehabilitation, but also had a smaller storage volume than the natural stream with similar bank slopes. This suggests that the floodplain restoration does not significantly contribute to

Cerebral scintigraphy by 99mTc-HMPAO in sleep apnea syndromes (SAS) during the wakeful state

International Nuclear Information System (INIS)

Tainturier, C.; Benamor, M.; Hausser-Hauw, C.; Rakotonanahary, D.; Fleury, B.

1997-01-01

The SAS is associated to cerebral hemodynamic modifications and to a high frequency of cerebro-vascular accidents. The aim of this study was to verify, during wakeful state, the cerebral hemodynamic in 14 patients afflicted with SAS of various intensity (Apnea Index = 5-120/h). 555 MBq of 99m Tc-HMPAO were injected in patients maintained awake. The images were obtained 20 minutes after injection by mean of a double-head chamber equipped with fan-beam collimators. They were interpreted visually by two independent readers. Anomalies of cerebral fixation were observed in 12/14 patients. They were small sores of diffuse hypo-fixations, with a 'riddly' aspect (4 cases), sores of bi-temporal hypo-fixation with a right- or left- hemispheric predominance (6 cases), or right fronto-temporal hypo-fixations (2 cases). The cerebral fixation anomalies were reported in the SASs. Ficker et al (1997) have shown in-sleep frontal hypo-perfusions in 5/14 apneic patients, reversible under continuous positive airing pressure (CPAP). In conclusion, anomalies of cerebral fixation exist in SAS-carrying patients, even in the wakeful state. Questions about hypoperfusion, pre-lacunar syndrome, atrophy still remain. A check of this study is planned after the CPAP treatment to determine the hemodynamic or anatomic origin and the anomaly reversibility

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994. Revised Version

International Nuclear Information System (INIS)

Tveten, U.

1999-02-01

The present report is a revised version of an earlier report (IFE/KR/E-96/008). The revision has been carried out since a completely new version of the computational tool has recently been released. All calculations have been redone. The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institute for Energy Technology (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). Originating from the Norwegian project, a number of similar projects have been started in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the the Scandinavian Airlines System (SAS). The result presented in this report (radiation dose rates for the different types of aircraft in the different years) were calculated with the most recent computer program for this purpose, the CARI-5E from the United States Civil Aviation Authority. The other major sources of information used as basis for this work is the collection of old SAS time tables found the the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Association in Norway

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994. Revised Version

Energy Technology Data Exchange (ETDEWEB)

Tveten, U

1999-02-01

The present report is a revised version of an earlier report (IFE/KR/E-96/008). The revision has been carried out since a completely new version of the computational tool has recently been released. All calculations have been redone. The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institute for Energy Technology (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). Originating from the Norwegian project, a number of similar projects have been started in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the the Scandinavian Airlines System (SAS). The result presented in this report (radiation dose rates for the different types of aircraft in the different years) were calculated with the most recent computer program for this purpose, the CARI-5E from the United States Civil Aviation Authority. The other major sources of information used as basis for this work is the collection of old SAS time tables found the the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Association in Norway.

FY2017 Updates to the SAS4A/SASSYS-1 Safety Analysis Code

Energy Technology Data Exchange (ETDEWEB)

Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-09-30

The SAS4A/SASSYS-1 safety analysis software is used to perform deterministic analysis of anticipated events as well as design-basis and beyond-design-basis accidents for advanced fast reactors. It plays a central role in the analysis of U.S. DOE conceptual designs, proposed test and demonstration reactors, and in domestic and international collaborations. This report summarizes the code development activities that have taken place during FY2017. Extensions to the void and cladding reactivity feedback models have been implemented, and Control System capabilities have been improved through a new virtual data acquisition system for plant state variables and an additional Block Signal for a variable lag compensator to represent reactivity feedback for novel shutdown devices. Current code development and maintenance needs are also summarized in three key areas: software quality assurance, modeling improvements, and maintenance of related tools. With ongoing support, SAS4A/SASSYS-1 can continue to fulfill its growing role in fast reactor safety analysis and help solidify DOE’s leadership role in fast reactor safety both domestically and in international collaborations.

A SAS2H/KENO-V methodology for 3D fuel burnup analysis

International Nuclear Information System (INIS)

Milosevic, M.; Greenspan, E.; Vujic, J.

2002-01-01

An efficient methodology for 3D fuel burnup analysis of LWR reactors is described in this paper. This methodology is founded on coupling Monte Carlo method for 3D calculation of node power distribution, and transport method for depletion calculation in ID Wigner-Seitz equivalent cell for each node independently. The proposed fuel burnup modeling, based on application of SCALE-4.4a control modules SAS2H and KENO-V.a is verified for the case of 2D x-y model of IRIS 15 x 15 fuel assembly (with reflective boundary condition) by using two well benchmarked code systems. The one is MOCUP, a coupled MCNP-4C and ORIGEN2.1 utility code, and the second is KENO-V.a/ORIGEN2.1 code system recently developed by authors of this paper. The proposed SAS2H/KENO-V.a methodology was applied for 3D burnup analysis of IRIS-1000 benchmark.44 core. Detailed k sub e sub f sub f and power density evolution with burnup are reported. (author)

Le procédé du collage dans l’oeuvre de Max Ernst

Directory of Open Access Journals (Sweden)

Márcia Maria Valle Arbex

2011-10-01

Full Text Available Considerado um dos inventores da colagem, no sentido moderno da palavra, Max Ernst desenvolve a técnica estendendo sua prática e transformando-a em conceito. Nossa reflexão aborda este “recurso” sob ângulo de sua relação com a noção de imagem surrealista, a partir de exemplos de trabalhos executados em 1919-1920, onde as imagens vêm acompanhadas de legendas, formando o que chamamos de poema-duplo.Considéré l’un des créateurs du collage dans le sens moderne du mot, Max Ernst développe cete technique en élargissant sa pratique et en la transformant en concept. Notre réflexion porte sur ce “procédé”, sous l’angle de ses rapports avec la notion d’image poétique surréaliste, à partir d’exemples de travaux réalisés en 1919-1920, où des légendes accompagnent les images formant une sorte poème-double.

Cerebral scintigraphy by {sup 99m}Tc-HMPAO in sleep apnea syndromes (SAS) during the wakeful state; Scintigraphie cerebrale au Tc99m-HMPAO dans les syndromes d`apnees du sommeil (SAS) pendant l`etat de veille

Energy Technology Data Exchange (ETDEWEB)

Tainturier, C.; Benamor, M.; Hausser-Hauw, C.; Rakotonanahary, D.; Fleury, B. [CMC FOCH 92150 SURESNES (France)

1997-12-31

The SAS is associated to cerebral hemodynamic modifications and to a high frequency of cerebro-vascular accidents. The aim of this study was to verify, during wakeful state, the cerebral hemodynamic in 14 patients afflicted with SAS of various intensity (Apnea Index = 5-120/h). 555 MBq of {sup 99m}Tc-HMPAO were injected in patients maintained awake. The images were obtained 20 minutes after injection by mean of a double-head chamber equipped with fan-beam collimators. They were interpreted visually by two independent readers. Anomalies of cerebral fixation were observed in 12/14 patients. They were small sores of diffuse hypo-fixations, with a `riddly` aspect (4 cases), sores of bi-temporal hypo-fixation with a right- or left- hemispheric predominance (6 cases), or right fronto-temporal hypo-fixations (2 cases). The cerebral fixation anomalies were reported in the SASs. Ficker et al (1997) have shown in-sleep frontal hypo-perfusions in 5/14 apneic patients, reversible under continuous positive airing pressure (CPAP). In conclusion, anomalies of cerebral fixation exist in SAS-carrying patients, even in the wakeful state. Questions about hypoperfusion, pre-lacunar syndrome, atrophy still remain. A check of this study is planned after the CPAP treatment to determine the hemodynamic or anatomic origin and the anomaly reversibility

Development and psychometric properties of the Suicidality: Treatment Occurring in Paediatrics (STOP) Suicidality Assessment Scale (STOP-SAS) in children and adolescents.

Science.gov (United States)

Flamarique, I; Santosh, P; Zuddas, A; Arango, C; Purper-Ouakil, D; Hoekstra, P J; Coghill, D; Schulze, U; Dittmann, R W; Buitelaar, J K; Lievesley, K; Frongia, R; Llorente, C; Méndez, I; Sala, R; Fiori, F; Castro-Fornieles, J

2016-12-13

To create a self-reported, internet-based questionnaire for the assessment of suicide risk in children and adolescents. As part of the EU project 'Suicidality: Treatment Occurring in Paediatrics' (STOP project), we developed web-based Patient Reported Outcome Measures (PROMs) for children and adolescents and for proxy reports by parents and clinicians in order to assess suicidality. Based on a literature review, expert panels and focus groups of patients, we developed the items of the STOP Suicidality Assessment Scale (STOP-SAS) in Spanish and English, translated it into four more languages, and optimized it for web-based presentation using the HealthTracker TM platform. Of the total 19 questions developed for the STOP-SAS, four questions that assess low-level suicidality were identified as screening questions (three of them for use with children, and all four for use with adolescents, parents and clinicians). A total of 395 adolescents, 110 children, 637 parents and 716 clinicians completed the questionnaire using the HealthTracker TM , allowing us to evaluate the internal consistency and convergent validity of the STOP-SAS with the clinician-rated Columbia Suicide Severity Rating Scale (C-SSRS). Validity was also assessed with the receiver operating characteristic (ROC) area of the STOP-SAS with the C-SSRS. The STOP-SAS comprises 19 items in its adolescent, parent, and clinician versions, and 14 items in its children's version. Good internal consistency was found for adolescents (Cronbach's alpha: 0.965), children (Cronbach's alpha: 0.922), parents (Cronbach's alpha: 0.951) and clinicians (Cronbach's alpha: 0.955) versions. A strong correlation was found between the STOP-SAS and the C-SSRS for adolescents (r:0.670), parents (r:0.548), clinicians (r:0.863) and children (r:0.654). The ROC area was good for clinicians' (0.917), adolescents' (0.834) and parents' (0.756) versions but only fair (0.683) for children's version. The STOP-SAS is a comprehensive, web

Implementation, verification, and validation of the FPIN2 metal fuel pin mechanics model in the SASSYS/SAS4A LMR transient analysis codes

International Nuclear Information System (INIS)

Sofu, T.; Kramer, J.M.

1994-01-01

The metal fuel version of the FPIN2 code which provides a validated pin mechanics model is coupled with SASSYS/SAS4A Version 3.0 for single pin calculations. In this implementation, SASSY/SAS4A provides pin temperatures, and FPIN2 performs analysis of pin deformation and predicts the time and location of cladding failure. FPIN2 results are also used for the estimates of axial expansion of fuel and associated reactivity effects. The revalidation of the integrated SAS-FPIN2 code system is performed using TREAT tests

Social Anxiety Scale for Adolescents (SAS-A: Psychometric properties in a Spanish-speaking population

Directory of Open Access Journals (Sweden)

José Olivares

2005-01-01

Full Text Available El objetivo de este estudio instrumental fue estudiar la estructura factorial y propiedades psicométricas de la Escala de Ansiedad Social para Adolescentes (SASA. Participaron 2407 adolescentes (1263 chicos y 1144 chicas, con una edad media de 15 años, alumnos de nueve institutos de la región de Murcia. Los resultados obtenidos apoyan la estructura tri-factorial propuesta por los autores de la escala (FNE, SAD-New, SAD-General. Se encontraron correlaciones interescalas significativas y niveles de consistencia interna elevados para las subescalas, así como respecto de los efectos del sexo en la puntuación SAS-A/Total y en sus subescalas, alcanzando las chicas las puntuaciones más elevadas. Sólo se hallaron diferencias significativas para la edad en la subescala FNE y no se constataron efectos de interacción entre los dos factores. Estos hallazgos parecen avalar el uso de la SAS-A en población adolescente de habla española.

Riik võib lüüa SAS-i esmaspäevaks Estonian Airi omanikeringist välja / Erik Müürsepp, Mikk Salu

Index Scriptorium Estoniae

Müürsepp, Erik

2008-01-01

SAS osaleb Estonian Airþile lisakapitali eraldamises ainult juhul, kui Eesti riik müüb oma osaluses lennukompaniis SAS-ile. Peaminister Andrus Ansipi ning majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

Analysis of the TREAT loss-of-flow tests L6 and L7 using SAS3D

International Nuclear Information System (INIS)

Morris, E.E.; Simms, R.; Gruber, E.E.

1985-01-01

The TREAT loss-of-flow tests L6 and L7 have been analyzed using the SAS3D accident analysis code. The impetus for the analysis was the need for experimentally supported fuel motion modeling in whole core accident studies performed in support of licensing of the Clinch River Breeder Reactor Project. The input prescription chosen for the SAS3D/SLUMPY fuel motion model gave reasonable agreement with the test results. Tests L6 and L7, each conducted with a cluster of three fuel pins, were planned to simulate key events in the loss-of-flow accident scenario for the Clinch River homogeneous reactor

Innovació en educació. De la idea a l’acció. Procés participatiu cap a l'INNED 2

Directory of Open Access Journals (Sweden)

Artur Parcerisa-Aran

2011-06-01

Full Text Available Per al progrés de l’educació, la innovació és indispensable. Aquest concepte, que es relaciona però no s’ha de confondre amb el de canvi, no tothom l’entén igual, i això fa que sigui necessari definir quines són les característiques que ha de tenir un procés perquè es pugui considerar una innovació educativa. A partir de la preocupació per ajudar a fer que les innovacions no es quedin només en idees sinó que esdevinguin realitats a les aules i en altres espais educatius, es va engegar un procés de trobades amb professorat i altres educadors i educadores per treballar sobre la innovació educativa de cara a l’organització del II Simposi d’Innovació Educativa (INNED 2. Un dels eixos que va suscitar més interès va ser el de la innovació metodològica. En la part final de l’article es recullen una sèrie de consideracions sobre alguns àmbits que cal considerar en aquesta innovació: la implicació de l’alumnat, l’organització de l’espai i el temps, l’avaluació per aprendre i l’atenció a la diversitat.

Pravděpodobnostní rozdělení v programu SAS

OpenAIRE

Rosypal, Martin

2009-01-01

The aim of this work is to elaborate the metodology of creation of custom add-ins for statistical application SAS Enterprise Guide and create one of these that would enable to simplify the calculation of quantiles, values of probability mass function (probability density function respectively) and cumulative distribution function and further based on user's specifications create an appropriate graph. In connection with content of this add-in, the presented work includes the recherche from bac...

Procés d’implantació de les HoloLens als boxes de reparació de SEAT, S.A.

OpenAIRE

Cano Almazán, Raquel

2017-01-01

Aquest treball de final de grau consisteix en la implantació d’una aplicació pertanyent a la Realitat Augmentada a la operativa de les auditories de manguetes del departament de Gestió de Qualitat de Motors i Triebsatz de l’empresa SEAT, S.A. L’aplicació que es vol aconseguir consisteix en un suport per l’auditor per realitzar correctament l’auditoria i per agilitzar el seu procés optimitzant els seus passos. El hardware que s’ha utilitzat per a poder dur a terme la aplicació en qüestió...

Comparison of SAS3A and MELT-III predictions for a transient overpower hypothetical accident

International Nuclear Information System (INIS)

Wilburn, N.P.

1976-01-01

A comparison is made of the predictions of the two major codes SAS3A and MELT-III for the hypothetical unprotected transient overpower accident in the FFTF. The predictions of temperatures, fuel restructuring, fuel melting, reactivity feedbacks, and core power are compared

A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

Science.gov (United States)

Elliott, Alan C; Hynan, Linda S

2011-04-01

The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Encadrement des produits et des procédés : réglementation et normalisation du commerce international

Directory of Open Access Journals (Sweden)

Morin Odile

2003-07-01

Full Text Available Produits et procédés sont encadrés à la fois par des réglementations et, à un autre niveau, par des normes du commerce international. Cette présentation traite des textes réglementaires au niveau communautaire et national. On rappellera que l’entrée en vigueur d’un règlement européen est suivie d’une transposition dans le droit de chaque pays membre et que la réglementation nationale s’applique en l’absence de dispositions communautaires. En matière de commerce international, seront évoquées les actions de normalisation du Conseil Oléicole International (COI pour les huiles d’olive et de grignons d’olive et celles du Codex Alimentarius pour les huiles et graisses comestibles. L’ensemble des dispositions réglementaires constitue un cadre englobant les productions de l’amont vers l’aval, à la fois sur un plan vertical (oléagineux, huiles et corps gras, huiles d’olive, margarines, procédés de raffinage et transversalement (composés organiques volatils, OGM, solvants d’extraction, additifs, contaminants…. Le cas de l’huile d’olive est particulier en ce qu’il bénéficie d’un encadrement au niveau international (normes commerciales COI et Codex Alimentarius, européen et national (réglementation. Le Codex Alimentarius, quant à lui, établit des normes à caractère vertical (huiles végétales, graisses animales, huiles d’olive, matières grasses tartinables… et horizontal (additifs, résidus de pesticides…. L’essentiel de cet encadrement est résumé dans les tableaux qui illustrent cette contribution.

Proteomic analysis of cellular response induced by boron neutron capture reaction in human squamous cell carcinoma SAS cells

International Nuclear Information System (INIS)

Sato, Akira; Itoh, Tasuku; Imamichi, Shoji; Kikuhara, Sota; Fujimori, Hiroaki; Hirai, Takahisa; Saito, Soichiro; Sakurai, Yoshinori; Tanaka, Hiroki; Nakamura, Hiroyuki; Suzuki, Minoru

2015-01-01

To understand the mechanism of cell death induced by boron neutron capture reaction (BNCR), we performed proteome analyses of human squamous tumor SAS cells after BNCR. Cells were irradiated with thermal neutron beam at KUR after incubation under boronophenylalanine (BPA)(+) and BPA(−) conditions. BNCR mainly induced typical apoptosis in SAS cells 24 h post-irradiation. Proteomic analysis in SAS cells suggested that proteins functioning in endoplasmic reticulum, DNA repair, and RNA processing showed dynamic changes at early phase after BNCR and could be involved in the regulation of cellular response to BNCR. We found that the BNCR induces fragments of endoplasmic reticulum-localized lymphoid-restricted protein (LRMP). The fragmentation of LRMP was also observed in the rat tumor graft model 20 hours after BNCT treatment carried out at the National Nuclear Center of the Republic of Kazakhstan. These data suggest that dynamic changes of LRMP could be involved during cellular response to BNCR. - Highlights: • BNCR in human squamous carcinoma cells caused typical apoptotic features. • BNCR induced fragments of LRMP, in human squamous carcinoma and rat tumor model. • The fragmentation of LRMP could be involved in cellular response to BNCR.

Code portability and data management considerations in the SAS3D LMFBR accident-analysis code

International Nuclear Information System (INIS)

Dunn, F.E.

1981-01-01

The SAS3D code was produced from a predecessor in order to reduce or eliminate interrelated problems in the areas of code portability, the large size of the code, inflexibility in the use of memory and the size of cases that can be run, code maintenance, and running speed. Many conventional solutions, such as variable dimensioning, disk storage, virtual memory, and existing code-maintenance utilities were not feasible or did not help in this case. A new data management scheme was developed, coding standards and procedures were adopted, special machine-dependent routines were written, and a portable source code processing code was written. The resulting code is quite portable, quite flexible in the use of memory and the size of cases that can be run, much easier to maintain, and faster running. SAS3D is still a large, long running code that only runs well if sufficient main memory is available

Distribution of sasX, pvl, and qacA/B genes in epidemic methicillin-resistant Staphylococcus aureus strains isolated from East China

Directory of Open Access Journals (Sweden)

Kong H

2018-01-01

Full Text Available Haishen Kong,1,2 Lingmei Fang,3 Rujin Jiang,4 Jixiang Tong2 1State Key Laboratory for Diagnosis and Treatment of Infectious Diseases, Collaborative Innovation Center for Diagnosis and Treatment of Infectious Diseases, First Affiliated Hospital, College of Medicine, Zhejiang University, Hangzhou, China; 2Key Laboratory of Clinical In Vitro Diagnostic Techniques of Zhejiang Province, Department of Laboratory Medicine, First Affiliated Hospital, College of Medicine, Zhejiang University, Hangzhou, China; 3Clinical Laboratory, Chunan First People’s Hospital, Zhejiang Province People’s Hospital Chunan Branch, Hangzhou, China; 4Clinical Laboratory, Yuhang Hospital of Traditional Chinese Medicine, Hangzhou, China Background: Methicillin-resistant Staphylococcus aureus (MRSA is a major nosocomial pathogen. Various virulence and antiseptic-resistant factors increase the pathogenicity of MRSA strains and allow for increased infection rates.Purpose: The purpose of this study was to investigate the prevalence and distribution of virulence-associated and antiseptic-resistant genes from epidemic MRSA strains isolated from East China.Methods: A newly designed multiplex PCR assay was used to assess whether the virulence-associated genes sasX and pvl and the chlorhexidine tolerance gene qacA/B were present in 189 clinical isolates of MRSA. Multilocus sequence typing (MLST and Staphylococcal protein A (spa typing of these isolates were also performed. The frequency of these genes in isolates with epidemic sequence types (STs was investigated. Results: Twenty STs and 36 spa types with five epidemic clones (ST5-t311, ST59-t437, ST5-t002, ST239-t030, and ST239-t037 were identified. The prevalence of sasX, pvl, and qacA/B in all isolates was 5.8%, 10.1%, and 20.1%, respectively. The prevalences of these genes in isolates with ST5, ST59, ST239, and other ST genetic backgrounds were all significantly different (P<0.001. Isolates that had the highest frequency of sas

Development and application of the automated Monte Carlo biasing procedure in SAS4

International Nuclear Information System (INIS)

Tang, J.S.; Broadhead, B.L.

1995-01-01

An automated approach for biasing Monte Carlo shielding calculations is described. In particular, adjoint fluxes from a one-dimensional discrete-ordinates calculation are used to generate biasing parameters for a three-dimensional Monte Carlo calculation. The automated procedure consisting of cross-section processing, adjoint flux determination, biasing parameter generation, and the initiation of a MORSE-SGC/S Monte Carlo calculation has been implemented in the SAS4 module of the SCALE computer code system. (author)

SAS4A and FPIN2X validation for slow ramp TOP accidents: experiments TS-1 and TS-2

International Nuclear Information System (INIS)

Hill, D.J.

1986-01-01

The purpose of this paper is to present further results in the series of experimental analyses being performed using SAS4A and FPIN2X in order to provide a systematic validation of these codes. The two experiments discussed here, TS-1 and TS-2, were performed by Westinghouse Hanford/Hanford Engineering Development Laboratory (WHC/HEDL) in the Transient Reactor Test (TREAT) Facility. They were slow ramp transient overpowers (TOPs) of ∼ 5 cent/s equivalent Fast Flux Test Facility (FFTF) ramp rate, single-pin experiments in flowing sodium loops. The good agreement found here adds significantly to the experimental data base that provides the foundation for SAS4A and FPIN2X validation. It also shows that prefailure internal fuel motion is a phenomenon that has to be correctly accounted for, not only as a potential inherent safety mechanism, but also before any accurate prediction of fuel failure and subsequent fuel motion and the associated reactivity effects can be made. This is also true for metal-fueled pins. This capability is provided by PINACLE, which is being incorporated into SAS4A

Simulació d'un procés industrial de cristallització de clorur de sodi (NaCl i aplicacions

Directory of Open Access Journals (Sweden)

Josefina Renedo Omaechevarría

2014-12-01

Full Text Available La cristal·lització a partir de dissolucions és important industrialment  donada la gran varietat de substàncies que es comercialitzen  cristal·litzades. Per millorar el procés  d’ensenyament-aprenentatge d’aquesta “Operació Bàsica”, en aquest treball, realitzat com a Treball de Fi de Carrera de la titulació  d’ Enginyeria Química, s’ha  desenvolupat un programa de simulació d’una cristal·lització industrial de NaCl.  L’objectiu ha sigut manejar  eines de càlcul  per simular  i optimitzar una cristal·lització, la qual cosa permet conèixer més profundament el procés de la cristal·lització i la utilització de les eines de càlcul, és a dir, utilitzar simultàniament els coneixements adquirits en les assignatures de Operacions amb Sòlid  i la de Simulació i Optimització de Processos. L’objectiu últim de l’ús d’aquest programa de simulació és que els estudiants de l’assignatura optativa Operacions  amb Sòlids del Grau en Enginyeria Química puguin fer servir aquest recurs a l’aula. Amb el programa utilitzat, en llenguatge Fortran, obtenim, d’una manera ràpida i eficaç, la velocitat de creixement dels cristalls G i la velocitat de nucleació B. Un cop calculats els valors de G i B, es pot programar una cristal·lització per obtenir  la distribució de tamany de cristall (DTC desitjat. Per últim s´han determinat els valors dels paràmetres cinètiques de B0.

Adaptive Tests of Significance Using Permutations of Residuals with R and SAS

CERN Document Server

O'Gorman, Thomas W

2012-01-01

Provides the tools needed to successfully perform adaptive tests across a broad range of datasets Adaptive Tests of Significance Using Permutations of Residuals with R and SAS illustrates the power of adaptive tests and showcases their ability to adjust the testing method to suit a particular set of data. The book utilizes state-of-the-art software to demonstrate the practicality and benefits for data analysis in various fields of study. Beginning with an introduction, the book moves on to explore the underlying concepts of adaptive tests, including:Smoothing methods and normalizing transforma

Cross-cultural adaptation of the Sport Anxiety Scale-2 (SAS-2 for the Brazilian context

Directory of Open Access Journals (Sweden)

Viviane Vedovato Silva-Rocha

Full Text Available Abstract Objective To present the process of cross-cultural adaptation of the Sport Anxiety Scale-2 (SAS-2 for the Brazilian context. Method The following stages were used: translation into Brazilian Portuguese by independent translators, elaboration of a synthesis version, back-translation, evaluation by experts and pretest with target population. Results All the stages of cross-cultural adaptation were completed, and in the majority of items evaluated, good concordance between experts was obtained (≥ 80%. Suggested adjustments were compiled into the consensus version by the two authors, with the resulting material being considered adequate in the pretest (and thus no further changes were needed. Termed as “Escala de Ansiedade Esportiva-2,” the final version was considered by the main author of the original scale as an official version in Brazilian Portuguese. Conclusions In view of the fulfilment of all steps suggested for the cross-cultural adaptation process, the SAS-2 is now available in Brazilian Portuguese to be tested for its psychometric qualities.

OECD benchmark a of MOX fueled PWR unit cells using SAS2H, triton and mocup

International Nuclear Information System (INIS)

Ganda, F.; Greenspan, A.

2005-01-01

Three code systems are tested by applying them to calculate the OECD PWR MOX unit cell benchmark A. The codes tested are the SAS2H code sequence of the SCALE5 code package using 44 group library, MOCUP (MCNP4C + ORIGEN2), and the new TRITON depletion sequence of SCALE5 using 238 group cross sections generated using CENTRM with continuous energy cross sections. The burnup-dependent k ∞ and actinides concentration calculated by all three code-systems were found to be in good agreement with the OECD benchmark average results. Limited results were calculated also with the WIMS-ANL code package. WIMS-ANL was found to significantly under-predict k ∞ as well as the concentration of Pu 242 , consistently with the predictions of the WIMS-LWR reported by two of the OECD benchmark participants. Additionally, SAS2H is benchmarked against MOCUP for a hydride fuel containing unit cell, giving very satisfactory agreement. (authors)

Un procédé de validation des métamodèles par les métadonnées

OpenAIRE

Plantec , Alain; Ribaud , Vincent

2005-01-01

International audience; La norme STEP a pour objet de standardiser des modèles de données par métier. Ce standard a développé un procédé de validation de la conformité des modèles dans lequel l'instanciation est un composant essentiel : un modèle est valide si un ensemble d'instances conformes au modèle est jugé sémantiquement correct par un expert du domaine. Appliqué à la métamodélisation, cette approche permet de construire et de valider les métamodèles par ranements successifs. Cette méth...

An alternative to the SAS2H/ORIGEN-S sequence to account for water-density effects in BWR systems

International Nuclear Information System (INIS)

Leal, L.C.; Hermann, O.W.; Ryman, J.C.; Broadhead, B.L.

1996-01-01

A scheme to generate one-group problem-dependent cross-section libraries for point-depletion calculations with the ORIGEN-S code was developed as an alternative to the SAS2H sequence of the SCALE code system. The methodology, named Automatic Rapid Processing (ARP), generates libraries by interpolating in SAS2H precomputed cross section libraries. The method has been used to generate ORIGEN-S cross section libraries on a personal computer resulting in a great reduction of computer time without a sacrifice of accuracy over that required by corresponding SAS2H calculations. The ARP scheme generates ORIGEN-S libraries by interpolating in burnup and enrichment for PWR assemblies. The intent of this work is to describe a procedure which extends the application of the ARP methodology to BWR assemblies by including the axial water-density effects in the generation of the ORIGEN-S cross-section libraries. The axial liquid- to-steam change of state in BWR systems leads to a variation in the water density and significant cross-section changes as a function of the water density. To account for the axial water-density changes in a SAS2H calculation, the water density is entered explicitly in the generation of the one-group ORIGEN-S cross-section libraries generated from the SCALE 27-group library. In its original version, ARP does not account for the effects of water-density variation in ORIGEN-S cross-section library generation, and, therefore, its application is restricted to systems for which the impact of this parameter is negligible. To update the ARP methodology to account for the water-density effect, a detailed study of the cross-section change with this parameter was performed with an 8 x 8 (General Electric) BWR assembly

Simple and flexible SAS and SPSS programs for analyzing lag-sequential categorical data.

Science.gov (United States)

O'Connor, B P

1999-11-01

This paper describes simple and flexible programs for analyzing lag-sequential categorical data, using SAS and SPSS. The programs read a stream of codes and produce a variety of lag-sequential statistics, including transitional frequencies, expected transitional frequencies, transitional probabilities, adjusted residuals, z values, Yule's Q values, likelihood ratio tests of stationarity across time and homogeneity across groups or segments, transformed kappas for unidirectional dependence, bidirectional dependence, parallel and nonparallel dominance, and significance levels based on both parametric and randomization tests.

Handling missing data in cluster randomized trials: A demonstration of multiple imputation with PAN through SAS

Directory of Open Access Journals (Sweden)

Jiangxiu Zhou

2014-09-01

Full Text Available The purpose of this study is to demonstrate a way of dealing with missing data in clustered randomized trials by doing multiple imputation (MI with the PAN package in R through SAS. The procedure for doing MI with PAN through SAS is demonstrated in detail in order for researchers to be able to use this procedure with their own data. An illustration of the technique with empirical data was also included. In this illustration thePAN results were compared with pairwise deletion and three types of MI: (1 Normal Model (NM-MI ignoring the cluster structure; (2 NM-MI with dummy-coded cluster variables (fixed cluster structure; and (3 a hybrid NM-MI which imputes half the time ignoring the cluster structure, and the other half including the dummy-coded cluster variables. The empirical analysis showed that using PAN and the other strategies produced comparable parameter estimates. However, the dummy-coded MI overestimated the intraclass correlation, whereas MI ignoring the cluster structure and the hybrid MI underestimated the intraclass correlation. When compared with PAN, the p-value and standard error for the treatment effect were higher with dummy-coded MI, and lower with MI ignoring the clusterstructure, the hybrid MI approach, and pairwise deletion. Previous studies have shown that NM-MI is not appropriate for handling missing data in clustered randomized trials. This approach, in addition to the pairwise deletion approach, leads to a biased intraclass correlation and faultystatistical conclusions. Imputation in clustered randomized trials should be performed with PAN. We have demonstrated an easy way for using PAN through SAS.

Modeling binary correlated responses using SAS, SPSS and R

CERN Document Server

Wilson, Jeffrey R

2015-01-01

Statistical tools to analyze correlated binary data are spread out in the existing literature. This book makes these tools accessible to practitioners in a single volume. Chapters cover recently developed statistical tools and statistical packages that are tailored to analyzing correlated binary data. The authors showcase both traditional and new methods for application to health-related research. Data and computer programs will be publicly available in order for readers to replicate model development, but learning a new statistical language is not necessary with this book. The inclusion of code for R, SAS, and SPSS allows for easy implementation by readers. For readers interested in learning more about the languages, though, there are short tutorials in the appendix. Accompanying data sets are available for download through the book s website. Data analysis presented in each chapter will provide step-by-step instructions so these new methods can be readily applied to projects.  Researchers and graduate stu...

Stratospheric Air Sub-sampler (SAS) and its application to analysis of Delta O-17(CO2) from small air samples collected with an AirCore

NARCIS (Netherlands)

Mrozek, Dorota Janina; van der Veen, Carina; Hofmann, Magdalena E. G.; Chen, Huilin; Kivi, Rigel; Heikkinen, Pauli; Rockmann, Thomas

2016-01-01

We present the set-up and a scientific application of the Stratospheric Air Sub-sampler (SAS), a device to collect and to store the vertical profile of air collected with an AirCore (Karion et al., 2010) in numerous sub-samples for later analysis in the laboratory. The SAS described here is a 20m

Recent progress on the R and D program of the seismic attenuation system (SAS) proposed for the advanced gravitational wave detector, LIGO II

International Nuclear Information System (INIS)

Bertolini, A.; Cella, G.; Chenyang, W.; Salvo, R. de; Kovalik, J.; Marka, S.; Sannibale, V.; Takamori, A.; Tariq, H.; Viboud, N.

2001-01-01

High-performance Seismic Isolation Systems in gravitational wave interferometers are needed not only to increase the sensitivity of the detectors but also to guarantee long periods of stable operation. SAS is essentially a system which produces the required in-band seismic isolation by use of passive mechanical filters and actively reduces the out of band seismic noise using inertial damping. The passive isolation is achieved for all the 6 degrees of freedom, with an Inverted Pendulum and a chain of single wire pendula whose masses are the Geometrical Anti-Spring Filters (GASF). The active control is applied to reduce mainly the noise below 4 Hz and to damp the resonances of the chain acting from the inverted pendulum table. Here we present a brief overview of SAS and recent results achieved from the full scale SAS prototype

SAS Macros for Calculation of Population Attributable Fraction in a Cohort Study Design

Directory of Open Access Journals (Sweden)

Maarit A. Laaksonen

2011-08-01

Full Text Available The population attributable fraction (PAF is a useful measure for quantifying the impact of exposure to certain risk factors on a particular outcome at the population level. Recently, new model-based methods for the estimation of PAF and its confidence interval for different types of outcomes in a cohort study design have been proposed. In this paper, we introduce SAS macros implementing these methods and illustrate their application with a data example on the impact of different risk factors on type 2 diabetes incidence.

Atomistic modelling of scattering data in the Collaborative Computational Project for Small Angle Scattering (CCP-SAS).

Science.gov (United States)

Perkins, Stephen J; Wright, David W; Zhang, Hailiang; Brookes, Emre H; Chen, Jianhan; Irving, Thomas C; Krueger, Susan; Barlow, David J; Edler, Karen J; Scott, David J; Terrill, Nicholas J; King, Stephen M; Butler, Paul D; Curtis, Joseph E

2016-12-01

The capabilities of current computer simulations provide a unique opportunity to model small-angle scattering (SAS) data at the atomistic level, and to include other structural constraints ranging from molecular and atomistic energetics to crystallography, electron microscopy and NMR. This extends the capabilities of solution scattering and provides deeper insights into the physics and chemistry of the systems studied. Realizing this potential, however, requires integrating the experimental data with a new generation of modelling software. To achieve this, the CCP-SAS collaboration (http://www.ccpsas.org/) is developing open-source, high-throughput and user-friendly software for the atomistic and coarse-grained molecular modelling of scattering data. Robust state-of-the-art molecular simulation engines and molecular dynamics and Monte Carlo force fields provide constraints to the solution structure inferred from the small-angle scattering data, which incorporates the known physical chemistry of the system. The implementation of this software suite involves a tiered approach in which GenApp provides the deployment infrastructure for running applications on both standard and high-performance computing hardware, and SASSIE provides a workflow framework into which modules can be plugged to prepare structures, carry out simulations, calculate theoretical scattering data and compare results with experimental data. GenApp produces the accessible web-based front end termed SASSIE-web , and GenApp and SASSIE also make community SAS codes available. Applications are illustrated by case studies: (i) inter-domain flexibility in two- to six-domain proteins as exemplified by HIV-1 Gag, MASP and ubiquitin; (ii) the hinge conformation in human IgG2 and IgA1 antibodies; (iii) the complex formed between a hexameric protein Hfq and mRNA; and (iv) synthetic 'bottlebrush' polymers.

ORNL-SAS: Versatile software for calculation of small-angle x-ray and neutron scattering intensity profiles from arbitrary structures

International Nuclear Information System (INIS)

Heller, William T; Tjioe, Elina

2007-01-01

ORNL-SAS is software for calculating solution small-angle scattering intensity profiles from any structure provided in the Protein Data Bank format and can also compare the results with experimental data

Plan de negocio para la creación de la empresa Itech S.A.S.

OpenAIRE

2012-01-01

ITEH S.A.S ofrecerá el servicio de consultoría y asesoría en el uso y gestión de las tecnologías de la información y las comunicaciones a las pymes del sector servicios, específicamente en el subsector jurídico, con el fin de apoyar sus procesos de negocio y fortalecer la competitividad de las mismas.

Usual Dietary Intakes: SAS Macros for Estimating Ratios of Two Dietary Components that are Consumed Nearly Every Day

Science.gov (United States)

The following SAS macros can be used to create a bivariate distribution of usual intake of two dietary components that are consumed nearly every day and to calculate percentiles of the population distribution of the ratio of usual intakes.

SAS Code for Calculating Intraclass Correlation Coefficients and Effect Size Benchmarks for Site-Randomized Education Experiments

Science.gov (United States)

Brandon, Paul R.; Harrison, George M.; Lawton, Brian E.

2013-01-01

When evaluators plan site-randomized experiments, they must conduct the appropriate statistical power analyses. These analyses are most likely to be valid when they are based on data from the jurisdictions in which the studies are to be conducted. In this method note, we provide software code, in the form of a SAS macro, for producing statistical…

Single molecule measurements of DNA helicase activity with magnetic tweezers and t-test based step-finding analysis

Science.gov (United States)

Seol, Yeonee; Strub, Marie-Paule; Neuman, Keir C.

2016-01-01

Magnetic tweezers is a versatile and easy to implement single-molecule technique that has become increasingly prevalent in the study of nucleic acid based molecular motors. Here, we provide a description of the magnetic tweezers instrument and guidelines for measuring and analyzing DNA helicase activity. Along with experimental methods, we describe a robust method of single-molecule trajectory analysis based on the Student’s t-test that accommodates continuous transitions in addition to the discrete transitions assumed in most widely employed analysis routines. To illustrate the single-molecule unwinding assay and the analysis routine, we provide DNA unwinding measurements of Escherichia coli RecQ helicase under a variety of conditions (Na+, ATP, temperature, and DNA substrate geometry). These examples reveal that DNA unwinding measurements under various conditions can aid in elucidating the unwinding mechanism of DNA helicase but also emphasize that environmental effects on DNA helicase activity must be considered in relation to in vivo activity and mechanism. PMID:27131595

Comparison of the SASSYS/SAS4A radial core expansion reactivity feedback model and the empirical correlation for FFTF

International Nuclear Information System (INIS)

Wigeland, R.A.

1987-01-01

The present emphasis on inherent safety for LMR designs has resulted in a need to represent the various reactivity feedback mechanisms as accurately as possible. The dominant negative reactivity feedback has been found to result from radial expansion of the core for most postulated ATWS events. For this reason, a more detailed model for calculating the reactivity feedback from radial core expansion has been recently developed for use with the SASSYS/SAS4A Code System. The purpose of this summary is to present an extension to the model so that it is more suitable for handling a core restraint design as used in FFTF, and to compare the SASSYS/SAS4A results using this model to the empirical correlation presently being used to account for radial core expansion reactivity feedback to FFTF

The Music Therapy Session Assessment Scale (MT-SAS): Validation of a new tool for music therapy process evaluation.

Science.gov (United States)

Raglio, Alfredo; Gnesi, Marco; Monti, Maria Cristina; Oasi, Osmano; Gianotti, Marta; Attardo, Lapo; Gontero, Giulia; Morotti, Lara; Boffelli, Sara; Imbriani, Chiara; Montomoli, Cristina; Imbriani, Marcello

2017-11-01

Music therapy (MT) interventions are aimed at creating and developing a relationship between patient and therapist. However, there is a lack of validated observational instruments to consistently evaluate the MT process. The purpose of this study was the validation of Music Therapy Session Assessment Scale (MT-SAS), designed to assess the relationship between therapist and patient during active MT sessions. Videotapes of a single 30-min session per patient were considered. A pilot study on the videotapes of 10 patients was carried out to help refine the items, define the scoring system and improve inter-rater reliability among the five raters. Then, a validation study on 100 patients with different clinical conditions was carried out. The Italian MT-SAS was used throughout the process, although we also provide an English translation. The final scale consisted of 7 binary items accounting for eye contact, countenance, and nonverbal and sound-music communication. In the pilot study, raters were found to share an acceptable level of agreement in their assessments. Explorative factorial analysis disclosed a single homogeneous factor including 6 items (thus supporting an ordinal total score), with only the item about eye contact being unrelated to the others. Moreover, the existence of 2 different archetypal profiles of attuned and disattuned behaviours was highlighted through multiple correspondence analysis. As suggested by the consistent results of 2 different analyses, MT-SAS is a reliable tool that globally evaluates sonorous-musical and nonverbal behaviours related to emotional attunement and empathetic relationship between patient and therapist during active MT sessions. Copyright © 2017 John Wiley & Sons, Ltd.

Enhancing the solubility and bioavailability of poorly water-soluble drugs using supercritical antisolvent (SAS) process.

Science.gov (United States)

Abuzar, Sharif Md; Hyun, Sang-Min; Kim, Jun-Hee; Park, Hee Jun; Kim, Min-Soo; Park, Jeong-Sook; Hwang, Sung-Joo

2018-03-01

Poor water solubility and poor bioavailability are problems with many pharmaceuticals. Increasing surface area by micronization is an effective strategy to overcome these problems, but conventional techniques often utilize solvents and harsh processing, which restricts their use. Newer, green technologies, such as supercritical fluid (SCF)-assisted particle formation, can produce solvent-free products under relatively mild conditions, offering many advantages over conventional methods. The antisolvent properties of the SCFs used for microparticle and nanoparticle formation have generated great interest in recent years, because the kinetics of the precipitation process and morphologies of the particles can be accurately controlled. The characteristics of the supercritical antisolvent (SAS) technique make it an ideal tool for enhancing the solubility and bioavailability of poorly water-soluble drugs. This review article focuses on SCFs and their properties, as well as the fundamentals of overcoming poorly water-soluble drug properties by micronization, crystal morphology control, and formation of composite solid dispersion nanoparticles with polymers and/or surfactants. This article also presents an overview of the main aspects of the SAS-assisted particle precipitation process, its mechanism, and parameters, as well as our own experiences, recent advances, and trends in development. Copyright © 2017 Elsevier B.V. All rights reserved.

Aprenentatge cooperatiu interdisciplinari i rúbriques per a la millora del procés d'ensenyament-aprenentatge

Directory of Open Access Journals (Sweden)

Beatriz Corchuelo Martínez-Azúa

2016-06-01

Full Text Available L'adaptació dels títols a l'Espai Europeu d'Educació Superior (EEES suposa l'ocasió de millorar l'educació integral dels alumnes, orientant les accions docents cap al desenvolupament de competències. L'adquisició de competències exigeix la incorporació de metodologies docents actives que permetin la generació enfront de la mera transmissió de coneixements. Així mateix, nombrosos estudis adverteixen de l'escassa transferència existent en els coneixements tractats en les assignatures quan es consideren de manera individual. El treball interdisciplinari constitueix una valuosa eina perquè els estudiants facin connexions, plantegin i trobin respostes a situacions problemàtiques i ajustin el seu aprenentatge a un coneixement integral. Pel que s'ha vist la necessitat de desenvolupar, en el currículum formatiu de l'alumne, aproximacions interdisciplinàries.Tenint en compte aquests aspectes, s'ha realitzat una experiència d'innovació docent universitària de caràcter interdisciplinari en la qual s'integren els continguts i competències de diverses assignatures per abordar el procés de solució de problemes econòmics. S'ha treballat la interdisciplinaritat amb tècniques d'aprenentatge cooperatiu. La interacció d’aquests aspectes és la raó por la quual hem denominat a l'experiència “Aprenentatge Cooperatiu Interdisciplinari” (ACI. L'avaluació de l'aprenentatge es realitza de forma individual, (mitjançant heteroevaluació i coevaluació, i grupal, (mitjançant rúbriques i coevaluació.Els resultats mostren diversos aspectes: 1 La metodologia ACI no solament permet formar en continguts sinó també en competències. 2 La interconnexió entre assignatures ha permès que els alumnes ajuste n els seus aprenentatges cap a un coneixement més integral. 3 La unió de les diferents innovacions docents ha repercutit positivament en la motivació de l'alumnat. 4 S'han assolit resultats d'aprenentatge positius en l'alumnat, majors

Cdk1 Phosphorylates Drosophila Sas-4 to Recruit Polo to Daughter Centrioles and Convert Them to Centrosomes.

Science.gov (United States)

Novak, Zsofia A; Wainman, Alan; Gartenmann, Lisa; Raff, Jordan W

2016-06-20

Centrosomes and cilia are organized by a centriole pair comprising an older mother and a younger daughter. Centriole numbers are tightly regulated, and daughter centrioles (which assemble in S phase) cannot themselves duplicate or organize centrosomes until they have passed through mitosis. It is unclear how this mitotic "centriole conversion" is regulated, but it requires Plk1/Polo kinase. Here we show that in flies, Cdk1 phosphorylates the conserved centriole protein Sas-4 during mitosis. This creates a Polo-docking site that helps recruit Polo to daughter centrioles and is required for the subsequent recruitment of Asterless (Asl), a protein essential for centriole duplication and mitotic centrosome assembly. Point mutations in Sas-4 that prevent Cdk1 phosphorylation or Polo docking do not block centriole disengagement during mitosis, but block efficient centriole conversion and lead to embryonic lethality. These observations can explain why daughter centrioles have to pass through mitosis before they can duplicate and organize a centrosome. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

The Proposal of Co-Branding Strategy PT. XYZ and SAS in Automotive Sector in SPAIN Market to Increase PT. XYZ Reputation in International Market

OpenAIRE

Putra A, Freggy Griyatta; Nasution, Reza Ashari

2012-01-01

The development of the lubricant market in the Asia-Pacific, Africa, Middle East, and South America is an opportunity for PT.XYZ in the future. PT. XYZ wants to improve their brand image through co-branding with the SAS company as one of the local oil company in Spain. The study also analyzes the co-branding strategy through Joint Venture of PT. XYZ with SAS to improve the company's brand image in the International market. The conceptual framework of this research started from the goal of PT....

Ruminal degradation of aerial biomass and seeds of wild species of Lupinus

OpenAIRE

Pablo-Pérez, Maricela; Lagunes-Espinoza, Luz del C; Ramos-Juárez, Jesús; López-Upton, Javier; Aranda-Ibáñez, Emilio M; Vargas-Villamil, Luis

2014-01-01

Ruminal degradation of dry matter (DMD) and crude protein (CPD) for aerial biomass at the flowering stage and for the seeds of L. campestris, L. exaltatus, L. hintonii and L. montanus was determined using the nylon bag technique with two fistulated steers in five incubation times (3, 9, 12, 24 and 48 h), including a sample of soybean paste (SP). The data obtained were analyzed using PROC MIXED of SAS for repeated measures. The results showed interactions between species and incubation time fo...

Performance Analysis of Compositional and Modified Black-Oil Models For a Gas Lift Process Analyse des performances de modèles black-oil pour le procédé d’extraction par injection de gaz

Directory of Open Access Journals (Sweden)

Mahmudi M.

2013-03-01

Full Text Available Artificial gas lift is frequently used to boost production rate of mature oil fields. An integrated mathematical model was developed in order to track the spatial and temporal changes in various components of the continuous gas lift process. The computational demand for solving the comprehensive gas lift model highly depends on the thermodynamic treatment of the hydrocarbon fluids involved. A full compositional treatment using an equation of state provides the most accurate results but at a high computational cost. The results of this article showed that the computational cost can be halved without sacrificing accuracy by using reduced parameter stability and flash calculation procedures. It was also demonstrated that a Modified Black-Oil treatment of the fluids can provide reasonable accuracy at a much-reduced computational cost. The Modified Black-Oil treatment provides a valuable tool when the model has to be solved many hundreds of times to find the optimal combination of the gas lift parameters. Les procédés artificiels d’extraction par injection de gaz sont utilisés pour améliorer le taux de récupération des champs pétroliers matures. Un modèle mathématique intégré a été développé pour détecter de faibles changements temporels et spatiaux dans plusieurs composants des procédés continus d’extraction par injection de gaz. La solution numérique utilisée pour résoudre le modèle du procédé d’extraction dépend fortement du comportement thermodynamique des hydrocarbures impliqués. Un traitement complet de la composition utilisant une équation d’état offre les résultats les plus précis, mais à un coût de calcul très élevé. Les résultats de nos travaux de recherche montrent que l’implication des paramètres de stabilité et des procédures de calcul flash, peut diviser par deux le coût du calcul tout en gardant la précision attendue. Ces travaux montrent que la précision admissible peut être �

Preliminary study: Predictors for success in an important premedical ...

African Journals Online (AJOL)

SAS Institute Inc., USA) (p-values ≤0.05 are significant) using the t-test, Fisher's exact test and the simple linear regression test. Results. These indicated that a good Matric symbol (≥5) in English and life science and a good performance in the ...

SAS3A analysis of natural convection boiling behavior in the Sodium Boiling Test Facility

International Nuclear Information System (INIS)

Klein, G.A.

1979-01-01

An analysis of natural convection boiling behavior in the Sodium Boiling Test (SBT) Facility has been performed using the SAS3A computer code. The predictions from this analysis indicate that stable boiling can be achieved for extensive periods of time for channel powers less than 1.4 kW and indicate intermittent dryout at higher powers up to at least 1.7 kW. The results of this anaysis are in reasonable agreement with the SBT Facility test results

An analysis of market shares on the Danish alcohol market using unobserved components

DEFF Research Database (Denmark)

Milhøj, Anders

2009-01-01

The Danish alcohol market has three types of alcohol: Beer, Wine and Spirits. The market share of wine has doubled over a 25 year period, while the market share of beer has been declining and the market share of spirits is generally low and fluctuating. In recent years the trending behavior has...... however changed, most likely because of changes in taxation on spirits. In the paper these market shares are analyzed by unobserved components models using Proc Ucm as models with time varying trends etc. are well suited for this type of data. In Denmark the relative prices for the three types of alcohol...... have changed radically because of changes in the taxation and hence the relative prices provide good independent variables in regressions. In SAS version 9.2 Proc Ucm has been extended with a Randomreg statement, that allows for the varying regression coefficients. One result is that the effect...

PRO-C3-levels in patients with HIV/HCV-Co-infection reflect fibrosis stage and degree of portal hypertension

DEFF Research Database (Denmark)

Jansen, Christian; Leeming, Diana J; Mandorfer, Mattias

2014-01-01

BACKGROUND: Liver-related deaths represent the leading cause of mortality among patients with HIV/HCV-co-infection, and are mainly related to complications of fibrosis and portal hypertension. In this study, we aimed to evaluate the structural changes by the assessment of extracellular matrix (ECM......) derived degradation fragments in peripheral blood as biomarkers for fibrosis and portal hypertension in patients with HIV/HCV co-infection. METHODS: Fifty-eight patients (67% male, mean age: 36.5 years) with HIV/HCV-co-infection were included in the study. Hepatic venous pressure gradient (HVPG......4M and C5M levels were higher in patients with portal hypertension (HVPG>5 mmHg). CONCLUSION: PRO-C3 levels reflect liver injury, stage of liver fibrosis and degree of portal hypertension in HIV/HCV-co-infected patients. Furthermore, C4M and C5M were associated with increased portal pressure...

Relap4/SAS/Mod5 - A version of Relap4/Mod 5 adapted to IPEN/CNEN - SP computer center

International Nuclear Information System (INIS)

Sabundjian, G.

1988-04-01

In order to improve the safety of nuclear reactor power plants several computer codes have been developed in the area of thermal - hydraulics accident analysis. Among the public-available codes, RELAP4, developed by Aerojet Nuclear Company, has been the most popular one. RELAP4 has produced satisfactory results when compared to most of the available experimental data. The purposes of the present work are: optimization of RELAP4 output and messages by writing there information in temporary records, - display of RELAP4 results in graphical form through the printer. The sample problem consists on a simplified model of a 150 MW (e) PWR whose primary circuit is simulated by 6 volumes, 8 junctions and 1 heat slab. This new version of RELAP4 (named RELAP4/SAS/MOD5) have produced results which show that the above mentioned purposes have been reached. Obviously the graphical output by RELAP4/SAS/MOD5 favors the interpretation of results by the user. (author) [pt

Plan de empresa DROP S.A.S. artículos y accesorios para mascotas

OpenAIRE

2012-01-01

Este trabajo es un plan de empresa que determina la viabilidad del proyecto DROP S.A.S, que tiene como finalidad la producción y comercialización de artículos para mascotas. Para lograr este fin, se ha realizado el plan de mercadeo, plan de producción, plan de organización y plan financiero, al hacer un estudio detallado de cada uno de estos módulos Inicialmente se elaboró el plan de mercadeo, en el que se hizo un análisis de las fuerzas del entorno, dentro del cual, se encuentra el estud...

[Calculating Pearson residual in logistic regressions: a comparison between SPSS and SAS].

Science.gov (United States)

Xu, Hao; Zhang, Tao; Li, Xiao-song; Liu, Yuan-yuan

2015-01-01

To compare the results of Pearson residual calculations in logistic regression models using SPSS and SAS. We reviewed Pearson residual calculation methods, and used two sets of data to test logistic models constructed by SPSS and STATA. One model contained a small number of covariates compared to the number of observed. The other contained a similar number of covariates as the number of observed. The two software packages produced similar Pearson residual estimates when the models contained a similar number of covariates as the number of observed, but the results differed when the number of observed was much greater than the number of covariates. The two software packages produce different results of Pearson residuals, especially when the models contain a small number of covariates. Further studies are warranted.

Modélisation du procédé de soudage hybride Arc / Laser par une approche level set application aux toles d'aciers de fortes épaisseurs A level-set approach for the modelling of hybrid arc/laser welding process application for high thickness steel sheets joining

Directory of Open Access Journals (Sweden)

Desmaison Olivier

2013-11-01

Full Text Available Le procédé de soudage hybride Arc/Laser est une solution aux assemblages difficiles de tôles de fortes épaisseurs. Ce procédé innovant associe deux sources de chaleur : un arc électrique produit par une torche MIG et une source laser placée en amont. Ce couplage améliore le rendement du procédé, la qualité du cordon et les déformations finales. La modélisation de ce procédé par une approche Level Set permet une prédiction du développement du cordon et du champ de température associé. La simulation du soudage multi-passes d'une nuance d'acier 18MnNiMo5 est présentée ici et les résultats sont comparés aux observations expérimentales. The hybrid arc/laser welding process has been developed in order to overcome the difficulties encountered for joining high thickness steel sheets. This innovative process gathers two heat sources: an arc source developed by a MIG torch and a pre-located laser source. This coupling improves the efficiency of the process, the weld bead quality and the final deformations. The Level-Set approach for the modelling of this process enables the prediction of the weld bead development and the temperature field evolution. The simulation of the multi-passes welding of a 18MnNiMo5 steel grade is detailed and the results are compared to the experimental observations.

Evaluation of sleep apnea syndrome (SAS) with low field MR fluoroscopy

International Nuclear Information System (INIS)

Fukatsu, Hiroshi; Ando, Yoko; Ishigaki, Takeo; Okada, Tamotsu.

1995-01-01

Eight cases of clinically diagnosed sleep apnea syndrome (SAS) and two normal volunteers were studied with low field MR fluoroscopy in order to monitor the waking and sleeping status of the upper airway. MR fluoroscopy revealed that only the sleeping patients showed occlusions of the upper airway. This technique provided us with useful information about the level, frequency and duration of occlusion in each case. Four of the eight patients demonstrated simple retropalatal occlusion, whereas the other four demonstrated mixed retropalatal and retropalato-retroglossal occlusion. Thus long-time monitoring, which is only possible with MR fluoroscopy, is needed to appreciate the complex nature of the disease. In addition, the comfortable surroundings and low noise level provided by the low field enabled physiological study to be performed without any tranquilizers in most of the patients, which is again only possible with MR fluoroscopy. MR fluoroscopy may become a tool of great clinical value, providing much important information for disease evaluation and treatment selection. (author)

Validation of a Malay Version of the Smartphone Addiction Scale among Medical Students in Malaysia.

Science.gov (United States)

Ching, Siew Mooi; Yee, Anne; Ramachandran, Vasudevan; Sazlly Lim, Sazlyna Mohd; Wan Sulaiman, Wan Aliaa; Foo, Yoke Loong; Hoo, Fan Kee

2015-01-01

This study was initiated to determine the psychometric properties of the Smart Phone Addiction Scale (SAS) by translating and validating this scale into the Malay language (SAS-M), which is the main language spoken in Malaysia. This study can distinguish smart phone and internet addiction among multi-ethnic Malaysian medical students. In addition, the reliability and validity of the SAS was also demonstrated. A total of 228 participants were selected between August 2014 and September 2014 to complete a set of questionnaires, including the SAS and the modified Kimberly Young Internet addiction test (IAT) in the Malay language. There were 99 males and 129 females with ages ranging from 19 to 22 years old (21.7±1.1) included in this study. Descriptive and factor analyses, intra-class coefficients, t-tests and correlation analyses were conducted to verify the reliability and validity of the SAS. Bartlett's test of sphericity was significant (p addiction scale among medical students. This scale was shown to be reliable and valid in the Malay language.

Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D

Science.gov (United States)

Frerichs, H.; Schmitz, O.; Covele, B.; Feng, Y.; Guo, H. Y.; Hill, D.

2018-05-01

Numerical simulations of toroidal asymmetries in a tightly baffled small angle slot (SAS) divertor on the DIII-D tokamak show that toroidal asymmetries in divertor closure result in (non-axisymmetric) local onset of detachment within a density window of 10-15% on top of the nominal threshold separatrix density. The SAS divertor is explored at DIII-D for improving access to cold, dissipative/detached divertor conditions. The narrow width of the slot divertor coupled with a small magnetic field line-to-target angle facilitates the buildup of neutral density, thereby increasing radiative and neutrals-related (atoms and molecules) losses in the divertor. Small changes in the strike point location can be expected to have a large impact on divertor conditions. The combination of misaligned slot structure and non-axisymmetric perturbations to the magnetic field configuration causes the strike point to move along the divertor target plate, possibly leaving the divertor slot at some locations. The latter extreme case essentially introduces an opening in the divertor slot from where recycling neutrals can easily escape, and thereby degrade the performance of the slot divertor. Such a strike point dislocation is approximated by a finite gap in the divertor baffle for which 3D edge plasma and neutral gas simulations are performed with the EMC3-EIRENE code.

Le Procès de Tôkyô, l’empereur et la question du Yasukuni The Tokyo trial, the emperor and the Yasukuni shrine

Directory of Open Access Journals (Sweden)

Tetsuya Takahashi

2010-07-01

Full Text Available Au Japon, toute une partie de la classe politique conservatrice persiste à refuser les conclusions du procès de Tôkyô, considérant celui-ci comme une justice « orchestrée par les vainqueurs ». Ce faisant, les partisans de cette thèse se trouvent dans une contradiction puisque l’empereur Hirohito lui-même, qui avait exprimé sa gratitude auprès des forces d’occupation américaines pour l’avoir épargné, en avait de facto admis les conclusions. Ce paradoxe pour le camp conservateur est aggravé par le fait que l’empereur a cessé de se rendre au sanctuaire Yasukuni à partir du moment où les mânes de quatorze haut responsables condamnés comme criminels de guerre lors du procès de Tôkyô y furent transférés sans son accord. Ces contradictions internes à la droite irrédentiste japonaise invite ainsi à envisager le procès de Tôkyô sous un autre jour. Loin d’être une simple « justice de vainqueur », la stratégie américaine fut éminemment bénéfique pour la droite conservatrice : Hirohito n’étant pas traduit en justice, il devenait possible de lui conférer une fonction symbolique par l’article I de la nouvelle Constitution de 1946, ce qui permit à la droite conservatrice de sauver le système impérial et d’assurer une continuité entre l’avant et l’après-guerre.In Japan, a part of the conservative political class continues to deny the conclusions of the Tokyo trial, as a justice “of the victors”. But the proponents of this theory face a contradiction since the Emperor Hirohito himself expressed his gratitude to the American occupation authority (SCAP for not condemning him. Hirohito therefore admitted the conclusions of the trial. The paradox goes even further as the conservative leaders publicize their visit to Yasukuni shrine although the Emperor himself ceased to visit the shrine after top leaders convicted as war criminals at the Tokyo Trial were transferred to the shrine without his

The neo-epitope specific PRO-C3 ELISA measures true formation of type III collagen associated with liver and muscle parameters

DEFF Research Database (Denmark)

Nielsen, Mette J; Nedergaard, Anders F; Sun, Shu

2013-01-01

AIM: The present study describes the assessment of true formation of type III collagen in different pathologies using a neo-epitope specific competitive Enzyme-linked immunosorbent assay (ELISA) towards the N-terminal propeptide of type III collagen (PRO-C3). METHODS: The monoclonal antibody...... was raised against the N-protease mediated cleavage site of the N-terminal propeptide of type III collagen and a competitive ELISA was developed using the selected antibody. The assay was evaluated in relation to neo-epitope specificity, technical performance, and as a marker for liver fibrosis and muscle...... mass using the rat carbon tetrachloride (CCl4) model and a study of immobilization induced muscle loss in humans, respectively. RESULTS: The ELISA was neo-epitope specific, technically stable and can be assessed in serum and plasma samples. In the CCl4 liver fibrosis model it was observed that serum...

Estimativas de parâmetros de cruzamentos para peso de fêmeas Holandês/Gir

OpenAIRE

Martins,Gabrimar Araújo; Madalena,Fernando Enrique; Bruschi,José Henrique; Costa,José Ladeira da; Teodoro,Roberto Luiz; Monteiro,João Bosco Neves

2004-01-01

Objetivou-se, com este trabalho, o desenvolvimento de modelo para a descrição do peso de vacas, novilhas e bezerras Holandês/Gir. Foram utilizados 18.089 pesos mensais de 412 fêmeas, em fazenda demonstrativa na Zona da Mata de Minas Gerais. Os dados foram analisados pelo Proc Mixed do pacote SAS, separadamente, para as seguintes categorias: a) vacas, b) novilhas maiores de 12 meses de idade, c) novilhas de 70 dias a 12 meses e d) bezerras de até 70 dias. Para cada uma destas categorias, as eq...

Estimates of crossbreeding parameters for live weight in Holstein/Gir females

OpenAIRE

Martins, Gabrimar Araújo; Madalena, Fernando Enrique; Bruschi, José Henrique; Costa, José Ladeira da; Teodoro, Roberto Luiz; Monteiro, João Bosco Neves

2004-01-01

Objetivou-se, com este trabalho, o desenvolvimento de modelo para a descrição do peso de vacas, novilhas e bezerras Holandês/Gir. Foram utilizados 18.089 pesos mensais de 412 fêmeas, em fazenda demonstrativa na Zona da Mata de Minas Gerais. Os dados foram analisados pelo Proc Mixed do pacote SAS, separadamente, para as seguintes categorias: a) vacas, b) novilhas maiores de 12 meses de idade, c) novilhas de 70 dias a 12 meses e d) bezerras de até 70 dias. Para cada uma destas categorias, as eq...

Protocolo de Observação Comportamental - PROC: valores de referência para uma análise quantitativa Behavioral Observation Protocol: reference values for a quantitative analysis

Directory of Open Access Journals (Sweden)

Simone Rocha de Vasconcellos Hage

2012-08-01

Full Text Available OBJETIVO: obter valores de referência para protocolo de observação comportamental (PROC sobre o desenvolvimento de habilidades comunicativas e de esquemas simbólicos em crianças com desenvolvimento típico de linguagem. MÉTODO: foram avaliadas 44 crianças entre 24 e 47 meses de ambos os gêneros, selecionadas em escolas de educação infantil, por meio de triagem do desenvolvimento global Denver II e questionário com os pais. Todas as crianças foram filmadas durante 30 minutos em interação com um adulto em atividade envolvendo brinquedos. As gravações foram analisadas por meio do PROC. A análise estatística descreveu valores de média, mediana, valores mínimos e máximos. Foi utilizado o teste T de Student para comparação das idades. RESULTADOS: nas habilidades comunicativas, as crianças do estudo mostraram evolução com a idade (média para três e dois anos, respectivamente: 58,12 e 51,44, apesar de não ter sido encontrada diferença estatisticamente significante para as faixas etárias comparadas (p=0,486. Quanto ao item compreensão verbal, as crianças de três anos obtiveram melhor desempenho que as de dois (respectivas médias: 59,41 e 50,70, havendo diferença estatisticamente significante (p=0,0000020. Em relação ao item aspectos do desenvolvimento cognitivo, as crianças de três anos apresentaram melhor desempenho em comparação com as de dois (respectivas médias: 44,53 e 31,96, havendo diferença estatisticamente significante entre as pontuações obtidas (p=0,00364, mostrando que as crianças evoluem na hierarquia do simbolismo. CONCLUSÃO: a obtenção de valores de referência para o PROC veio combinar análise qualitativa e quantitativa, contribuindo, além do diagnóstico, para o acompanhamento objetivo de processos terapêuticos.PURPOSE: to obtain reference values for behavioral observation protocol on the development of communicative and symbolic schemes of children with typical language development

%lrasch_mml: A SAS Macro for Marginal Maximum Likelihood Estimation in Longitudinal Polytomous Rasch Models

Directory of Open Access Journals (Sweden)

Maja Olsbjerg

2015-10-01

Full Text Available Item response theory models are often applied when a number items are used to measure a unidimensional latent variable. Originally proposed and used within educational research, they are also used when focus is on physical functioning or psychological wellbeing. Modern applications often need more general models, typically models for multidimensional latent variables or longitudinal models for repeated measurements. This paper describes a SAS macro that fits two-dimensional polytomous Rasch models using a specification of the model that is sufficiently flexible to accommodate longitudinal Rasch models. The macro estimates item parameters using marginal maximum likelihood estimation. A graphical presentation of item characteristic curves is included.

Annotated Computer Output for Illustrative Examples of Clustering Using the Mixture Method and Two Comparable Methods from SAS.

Science.gov (United States)

1987-06-26

BUREAU OF STANDAR-S1963-A Nw BOM -ILE COPY -. 4eo .?3sa.9"-,,A WIN* MAT HEMATICAL SCIENCES _*INSTITUTE AD-A184 687 DTICS!ELECTE ANNOTATED COMPUTER OUTPUT...intoduction to the use of mixture models in clustering. Cornell University Biometrics Unit Technical Report BU-920-M and Mathematical Sciences Institute...mixture method and two comparable methods from SAS. Cornell University Biometrics Unit Technical Report BU-921-M and Mathematical Sciences Institute

Validation of a Malay Version of the Smartphone Addiction Scale among Medical Students in Malaysia.

Directory of Open Access Journals (Sweden)

Siew Mooi Ching

Full Text Available This study was initiated to determine the psychometric properties of the Smart Phone Addiction Scale (SAS by translating and validating this scale into the Malay language (SAS-M, which is the main language spoken in Malaysia. This study can distinguish smart phone and internet addiction among multi-ethnic Malaysian medical students. In addition, the reliability and validity of the SAS was also demonstrated.A total of 228 participants were selected between August 2014 and September 2014 to complete a set of questionnaires, including the SAS and the modified Kimberly Young Internet addiction test (IAT in the Malay language.There were 99 males and 129 females with ages ranging from 19 to 22 years old (21.7±1.1 included in this study. Descriptive and factor analyses, intra-class coefficients, t-tests and correlation analyses were conducted to verify the reliability and validity of the SAS. Bartlett's test of sphericity was significant (p <0.01, and the Kaiser-Mayer-Olkin measure of sampling adequacy for the SAS-M was 0.92, indicating meritoriously that the factor analysis was appropriate. The internal consistency and concurrent validity of the SAS-M were verified (Cronbach's alpha = 0.94. All of the subscales of the SAS-M, except for positive anticipation, were significantly related to the Malay version of the IAT.This study developed the first smart phone addiction scale among medical students. This scale was shown to be reliable and valid in the Malay language.

Technical support for a proposed decay heat guide using SAS2H/ORIGEN-S data

International Nuclear Information System (INIS)

Hermann, O.W.; Parks, C.V.; Renier, J.P.

1994-09-01

Major revisions are proposed to the current US Nuclear Regulatory Commission decay heat rate guide entitled ''Regulatory Guide 3.54, Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation,'' using a new data base produced by the SAS2H analysis sequence of the SCALE-4 system. The data base for the proposed guide revision has been significantly improved by increasing the number and range of parameters that generally characterize pressurized-water-reactor (PWR) and boiling-water-reactor (BWR) spent fuel assemblies. Using generic PWR and BWR assembly models, calculations were performed with each model for six different burnups at each of three separate specific powers to produce heat rates at 20 cooling times in the range of 1 to 110 y. The proposed procedure specifies proper interpolation formulae for the tabulated heat generation rates. Adjustment formulae for the interpolated values are provided to account for differences in initial 235 U enrichment and changes in the specific power of a cycle from the average value. Finally, safety factor formulae were derived as a function of burnup, cooling time, and type of reactor. The proposed guide revision was designed to be easier to use. Also, the complete data base and guide procedure is incorporated into an interactive code called LWRARC which can be executed on a personal computer. The report shows adequate comparisons of heat rates computed by SAS2H/ORIGEN-S and measurements for 10 BWR and 10 PWR fuel assemblies. The average differences of the computed minus the measured heat rates of fuel assemblies were -07 ± 2.6% for the BWR and 1.5 ± 1.3% for the PWR. In addition, a detailed analysis of the proposed procedure indicated the method and equations to be valid

SPSS and SAS programs for determining the number of components using parallel analysis and velicer's MAP test.

Science.gov (United States)

O'Connor, B P

2000-08-01

Popular statistical software packages do not have the proper procedures for determining the number of components in factor and principal components analyses. Parallel analysis and Velicer's minimum average partial (MAP) test are validated procedures, recommended widely by statisticians. However, many researchers continue to use alternative, simpler, but flawed procedures, such as the eigenvalues-greater-than-one rule. Use of the proper procedures might be increased if these procedures could be conducted within familiar software environments. This paper describes brief and efficient programs for using SPSS and SAS to conduct parallel analyses and the MAP test.

A SAS-based solution to evaluate study design efficiency of phase I pediatric oncology trials via discrete event simulation.

Science.gov (United States)

Barrett, Jeffrey S; Jayaraman, Bhuvana; Patel, Dimple; Skolnik, Jeffrey M

2008-06-01

Previous exploration of oncology study design efficiency has focused on Markov processes alone (probability-based events) without consideration for time dependencies. Barriers to study completion include time delays associated with patient accrual, inevaluability (IE), time to dose limiting toxicities (DLT) and administrative and review time. Discrete event simulation (DES) can incorporate probability-based assignment of DLT and IE frequency, correlated with cohort in the case of DLT, with time-based events defined by stochastic relationships. A SAS-based solution to examine study efficiency metrics and evaluate design modifications that would improve study efficiency is presented. Virtual patients are simulated with attributes defined from prior distributions of relevant patient characteristics. Study population datasets are read into SAS macros which select patients and enroll them into a study based on the specific design criteria if the study is open to enrollment. Waiting times, arrival times and time to study events are also sampled from prior distributions; post-processing of study simulations is provided within the decision macros and compared across designs in a separate post-processing algorithm. This solution is examined via comparison of the standard 3+3 decision rule relative to the "rolling 6" design, a newly proposed enrollment strategy for the phase I pediatric oncology setting.

SPSS and SAS procedures for estimating indirect effects in simple mediation models.

Science.gov (United States)

Preacher, Kristopher J; Hayes, Andrew F

2004-11-01

Researchers often conduct mediation analysis in order to indirectly assess the effect of a proposed cause on some outcome through a proposed mediator. The utility of mediation analysis stems from its ability to go beyond the merely descriptive to a more functional understanding of the relationships among variables. A necessary component of mediation is a statistically and practically significant indirect effect. Although mediation hypotheses are frequently explored in psychological research, formal significance tests of indirect effects are rarely conducted. After a brief overview of mediation, we argue the importance of directly testing the significance of indirect effects and provide SPSS and SAS macros that facilitate estimation of the indirect effect with a normal theory approach and a bootstrap approach to obtaining confidence intervals, as well as the traditional approach advocated by Baron and Kenny (1986). We hope that this discussion and the macros will enhance the frequency of formal mediation tests in the psychology literature. Electronic copies of these macros may be downloaded from the Psychonomic Society's Web archive at www.psychonomic.org/archive/.

Catalyseurs et procédés catalytiques utilisés dans la production des grands intermédiaires pétrochimiques. Situation actuelle et futur Catalysts and Catalytic Processes Used for the Production of the Major Petrochemical Building Blocks. Present Situation and the Future

Directory of Open Access Journals (Sweden)

Boitiaux J. P.

2006-11-01

Full Text Available La pétrochimie représente une part modeste du marché des catalyseurs, mais les dix dernières années ont vu des améliorations substantielles des catalyseurs et des procédés utilisés. Ces améliorations ont permis de mieux répondre à la demande en grands intermédiaires pétrochimiques. Cette évolution est bien illustrée par les hydrogénations, autour du vapocraquage destiné à produire des oléfines, par le reformage catalytique et les procédés satellites destinés à produire des aromatiques et par les nouveaux procédés de déshydrogénation, métathèse, oligomérisation. . . qui permettent de mieux équilibrer le marché des oléfines. Petrochemicals account for a modest share of the market for catalysts, but there have been substantial improvements in the catalysts and processes used in the last ten years. These improvements have brought about a better response to the demand for major petrochemical building blocks. This trend is clearly illustrated by hydrogenations in the field of steam cracking to produce olefins, by catalytic reforming and satellite processes to produce aromatics, and by new processes such as dehydrogenation, metathesis and oligomerization which provide better balance to the market for olefins.

Status populasi buaya Crocolylus porosus di daerah Kaimana dan Teluk Arguni Irian Jaya

Directory of Open Access Journals (Sweden)

Hellen Kurniyati

1999-06-01

Full Text Available The people of Indonesua have historically used crocodiles for a variety of non-commercial purposes. In the past ten years, a commercial collection from the wild almost threatened the population status. As pressure on the commercial hunting continuous, the successful conservation of Indonesian crocodiles will depend on the constant monitoring in the wild. Irian Jaya is one of several islands in Indonesia which historically accommodate unknown number of commercial crocodiles such as Crocolylus porosus. Althorough monitoring on the C. porosus status in Barusam Gasawi, Buruai Garawa, Kamabu rivers, and Suwiki lake located in Kaimana and Arguni Bay, Irian Jaya had been conducted since 1990 and continued in 1991, 1992, 1993, 1994, 1996, and 1998. The surveys techniques were conducted night count method and guided by a 1 : 100.000 map and GPS. A statistical analysis was performed on SAS using proc regression and proc mean. A significant result has only been noted in Suwiki Lake, where was the magnitude of the mean trend in density was 109%.

Development and application of the automated Monte Carlo biasing procedure in SAS4

International Nuclear Information System (INIS)

Tang, J.S.; Broadhead, B.L.

1993-01-01

An automated approach for biasing Monte Carlo shielding calculations is described. In particular, adjoint fluxes from a one-dimensional discrete-ordinates calculation are used to generate biasing parameters for a three-dimensional Monte Carlo calculation. The automated procedure consisting of cross-section processing, adjoint flux determination, biasing parameter generation, and the initiation of a MORSE-SGC/S Monte Carlo calculation has been implemented in the SAS4 module of the SCALE computer code system. The automated procedure has been used extensively in the investigation of both computational and experimental benchmarks for the NEACRP working group on shielding assessment of transportation packages. The results of these studies indicate that with the automated biasing procedure, Monte Carlo shielding calculations of spent fuel casks can be easily performed with minimum effort and that accurate results can be obtained at reasonable computing cost. The systematic biasing approach described in this paper can also be applied to other similar shielding problems

Reflexions sociològiques figuratives i de procés sobre l’esport i la globalització: algunes observacions conceptuals i teòriques, amb especial referència al futbol

OpenAIRE

Dunning, Eric

2009-01-01

Aquest article es divideix en tres parts. La primera consisteix en un comentari conceptual teòric sobre la globalització i en diversos exemples del món globalitzat de l’esport; la segona és un comentari sobre el desenvolupament i l’extensió global del futbol; i la tercera exposa el comentari d’algunes patologies relacionades amb l’esport. Tot al llarg de l’article s’aplica l’enfocament sociològic figuratiu i de procés desenvolupat per Norbert Elias. En resum, aquest treball és fonamentalment ...

Inorganic Species Behaviour in Thermochemical Processes for Energy Biomass Valorisation Comportement des espèces inorganiques dans les procédés thermochimiques de valorisation énergétique de la biomasse

Directory of Open Access Journals (Sweden)

Froment K.

2013-09-01

difficulties (corrosion, fouling, etc.: a detailed summary of the specific behaviour of the inorganic compounds in biomass thermal conversion facilities will be given, going from the description of inorganic species included in biomass up to the prevention and the solution, as far as possible. The following topics will therefore be developed: inventory of inorganic species in different biomasses; general review of the inorganic speciation during thermal conversion processes; technological barriers to overcome for economic and technological process improvements; specific aspects related to inorganic species behaviour investigated at CEA: inorganic species release and condensation; aerosol behaviour and deposits; hot particles filtration; slag formation and interactions with reactor wall. Les espèces inorganiques de la biomasse (bois, déchets agricoles, déchets ménagers voire boues d’épuration présentent un large spectre en compositions et quantités, dépendant de l’origine de la biomasse (nature, lieux et conditions de sa croissance, etc.. Les différents procédés de conversion (combustion, pyrolyse, gazéification, etc. et les différentes technologies associées (fours à grille, lits fixes ou fluidisés, réacteurs à flux entraînés, etc. utilisant l’énergie de la biomasse, fournissent des conditions opératoires très variées en atmosphère, température, pression, etc. Au cours de chacun de ces procédés thermiques de conversion, en fonction de la composition initiale de la biomasse, de l’atmosphère et la température du procédé (la pression est un paramètre de second ordre par rapport aux précédents, certaines espèces inorganiques réagissent pour former des composés liquides ou gazeux, seuls ou combinés à d’autres espèces : celles-ci peuvent être soit piégées à différents endroits dans le procédé, soit relâchées avec le gaz. Les interactions potentielles de ces espèces inorganiques avec les parois des réacteurs, les mat

SPSS and SAS programs for addressing interdependence and basic levels-of-analysis issues in psychological data.

Science.gov (United States)

O'Connor, Brian P

2004-02-01

Levels-of-analysis issues arise whenever individual-level data are collected from more than one person from the same dyad, family, classroom, work group, or other interaction unit. Interdependence in data from individuals in the same interaction units also violates the independence-of-observations assumption that underlies commonly used statistical tests. This article describes the data analysis challenges that are presented by these issues and presents SPSS and SAS programs for conducting appropriate analyses. The programs conduct the within-and-between-analyses described by Dansereau, Alutto, and Yammarino (1984) and the dyad-level analyses described by Gonzalez and Griffin (1999) and Griffin and Gonzalez (1995). Contrasts with general multilevel modeling procedures are then discussed.

Déconstruction-reconstruction identitaire et poétique de l’altérité dans Le procès-verbal de J-M G. Le Clézio

Directory of Open Access Journals (Sweden)

Abdoulaye Diouf

2016-12-01

Full Text Available En partant du double mouvement rhizomatique de la « déterritorialisation » et de la « reterritorialisation », cet article se propose d’étudier la conception dynamique de l’identité dans Le procès-verbal de Jean-Marie Gustave Le Clézio (1963. Pour cela, il explore, d’une part, le processus graduel de déconstruction identitaire du héros du roman (marginalité, nudité, métamorphose par le biais de la médiation altéritaire – dans le sens d’un rapport au monde et à l’Autre – à partir de laquelle se reconstruit une nouvelle identité transcendante loin de tout essentialisme. D’autre part, il analyse les différentes stratégies de mise en altérité qui montrent au passage, avec sa théorie de l’« extase matérialiste » et le principe de l’identification qui la sous-tend, que l’être ne s’arrête pas à l’humain chez Le Clézio. Starting from the dual rhizome-like movement of the “deterritorialization” and “reterritorialization”, this article proposes to study the dynamic concept of identity in Le procès-verbal by Jean-Marie Gustave Le Clézio (1963. For this, it explores, firstly, the gradual process of identity deconstruction of the novel’s hero (marginality, nudity, metamorphosis through the othering mediation - in the sense of a relationship to the world and the Other - from which is rebuilt a new transcendent identity away from all essentialism. Furthermore, it analyzes the different otherness implementation strategies that show the way, with his theory of “materialistic ecstasy” and the principle of identification which underlies it, according to which being goes beyond humans for Le Clézio.

Computational procedures for probing interactions in OLS and logistic regression: SPSS and SAS implementations.

Science.gov (United States)

Hayes, Andrew F; Matthes, Jörg

2009-08-01

Researchers often hypothesize moderated effects, in which the effect of an independent variable on an outcome variable depends on the value of a moderator variable. Such an effect reveals itself statistically as an interaction between the independent and moderator variables in a model of the outcome variable. When an interaction is found, it is important to probe the interaction, for theories and hypotheses often predict not just interaction but a specific pattern of effects of the focal independent variable as a function of the moderator. This article describes the familiar pick-a-point approach and the much less familiar Johnson-Neyman technique for probing interactions in linear models and introduces macros for SPSS and SAS to simplify the computations and facilitate the probing of interactions in ordinary least squares and logistic regression. A script version of the SPSS macro is also available for users who prefer a point-and-click user interface rather than command syntax.

GéoSAS: A modular and interoperable Open Source Spatial Data Infrastructure for research

Directory of Open Access Journals (Sweden)

R. Bera

2015-05-01

Full Text Available To-date, the commonest way to deal with geographical information and processes still appears to consume local resources, i.e. locally stored data processed on a local desktop or server. The maturity and subsequent growing use of OGC standards to exchange data on the World Wide Web, enhanced in Europe by the INSPIRE Directive, is bound to change the way people (and among them research scientists, especially in environmental sciences make use of, and manage, spatial data. A clever use of OGC standards can help scientists to better store, share and use data, in particular for modelling. We propose a framework for online processing by making an intensive use of OGC standards. We illustrate it using the Spatial Data Infrastructure (SDI GéoSAS which is the SDI set up for researchers’ needs in our department. It is based on the existing open source, modular and interoperable Spatial Data Architecture geOrchestra.

GéoSAS: A modular and interoperable Open Source Spatial Data Infrastructure for research

Science.gov (United States)

Bera, R.; Squividant, H.; Le Henaff, G.; Pichelin, P.; Ruiz, L.; Launay, J.; Vanhouteghem, J.; Aurousseau, P.; Cudennec, C.

2015-05-01

To-date, the commonest way to deal with geographical information and processes still appears to consume local resources, i.e. locally stored data processed on a local desktop or server. The maturity and subsequent growing use of OGC standards to exchange data on the World Wide Web, enhanced in Europe by the INSPIRE Directive, is bound to change the way people (and among them research scientists, especially in environmental sciences) make use of, and manage, spatial data. A clever use of OGC standards can help scientists to better store, share and use data, in particular for modelling. We propose a framework for online processing by making an intensive use of OGC standards. We illustrate it using the Spatial Data Infrastructure (SDI) GéoSAS which is the SDI set up for researchers' needs in our department. It is based on the existing open source, modular and interoperable Spatial Data Architecture geOrchestra.

El procés d'avaluació i intervenció psicològica a pacients amb trastorns per abús d' alcohol i/o altres substàncies psicotròpiques

OpenAIRE

Trasovares Navarrete, María Victoria

2004-01-01

Aquest treball, realitzat al Centre d'Atenció i Seguiment de Drogodependències (CASD) de Nou Barris, ha tingut com a objectiu principal observar el rol del psicòleg clínic en el procés d'avaluació i intervenció psicoterapèutica en pacients que presenten un trastorn per dependència de substàncies psicotròpiques. Este trabajo, realizado en el Centro de Atención y Seguimiento de Drogodependencias (CASD) de Nou Barris, ha tenido como principal objetivo observar el rol del psicólogo clínico en ...

Planteamiento estratégico de Pronalfo S.A.S. y Reingeniería del Proceso de Producción

OpenAIRE

Fajardo Castillo, Erika Esperanza; Quiroga Arguello, Luz Andrea

2012-01-01

Pronalfo S.A.S es una empresa dedicada a la elaboración de núcleos balanceados como materia prima para la alimentación animal, fue creada hace 7 años y se encuentra en la etapa de crecimiento y posicionamiento en el mercado. Es necesario establecer el planeamiento estratégico mediante la definición de misión, visión, objetivos y estrategias, para tener clara su razón de ser y proyectándose al futuro estableciendo una ventaja competitiva mediante estrategias que le permitan mantenerse en ...

Desarrollo de las competencias en los altos ejecutivos y mandos medios de estrella petrolera de Colombia S.A.S.

OpenAIRE

Díaz Hurtado, David Hernando; Villamarín Rincón, Bibiana

2012-01-01

La situación actual de la compañía Estrella Petrolera de Colombia S.A.S, está demandando un replanteamiento en el manejo su departamento de Recursos Humanos. Como parte de la estrategia de la compañía para afrontar los retos del negocio se desea adoptar el proceso de Gestión Humana basada en competencias el cual brindará la orientación necesaria para el desarrollo del conocimiento y el aprendizaje permanente. Los métodos de gestión de Recursos Humanos basados en competencias facilita...

DEFORM-4: fuel pin characterization and transient response in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Miles, K.J.; Hill, D.J.

1986-01-01

The DEFORM-4 module is the segment of the SAS4A Accident Analysis Code System that calculates the fuel pin characterization in response to a steady state irradiation history, thereby providing the initial conditions for the transient calculation. The various phenomena considered include fuel porosity migration, fission gas bubble induced swelling, fuel cracking and healing, fission gas release, cladding swelling, and the thermal-mechanical state of the fuel and cladding. In the transient state, the module continues the thermal-mechanical response calculation, including fuel melting and central cavity pressurization, until cladding failure is predicted and one of the failed fuel modules is initiated. Comparisons with experimental data have demonstrated the validity of the modeling approach

ZEISIG: Approximate calculation of the intergranular gas fraction and the intragranular gas driven swelling for SAS4A

International Nuclear Information System (INIS)

Vaeth, L.

1993-02-01

A simple model has been developed for estimating, under steady-state irradiation conditions and for operational transients, the fraction of intergranular gas residing in fast reactor fuel and the intragranular gas driven swelling. The total gas retention in the fuel, the grain size and the irradiation conditions (mainly time dependent temperatures) must be known. Use has been made of parts of the fission gas model contained in the code LAKU and of results calculated with this code. The routine (named ZEISIG) is intended for insertion into the fast reactor accident model SAS4A as an extension of its fission gas model for steady-state reactor operation. (orig.) [de

Exploring item and higher order factor structure with the Schmid-Leiman solution: syntax codes for SPSS and SAS.

Science.gov (United States)

Wolff, Hans-Georg; Preising, Katja

2005-02-01

To ease the interpretation of higher order factor analysis, the direct relationships between variables and higher order factors may be calculated by the Schmid-Leiman solution (SLS; Schmid & Leiman, 1957). This simple transformation of higher order factor analysis orthogonalizes first-order and higher order factors and thereby allows the interpretation of the relative impact of factor levels on variables. The Schmid-Leiman solution may also be used to facilitate theorizing and scale development. The rationale for the procedure is presented, supplemented by syntax codes for SPSS and SAS, since the transformation is not part of most statistical programs. Syntax codes may also be downloaded from www.psychonomic.org/archive/.

Cloning, overexpression, purification, crystallization and preliminary X-ray diffraction analysis of an inositol monophosphatase family protein (SAS2203) from Staphylococcus aureus MSSA476

International Nuclear Information System (INIS)

Bhattacharyya, Sudipta; Dutta, Debajyoti; Ghosh, Ananta Kumar; Das, Amit Kumar

2011-01-01

The cloning, overexpression, purification, crystallization and preliminary X-ray diffraction analysis of an inositol monophosphatase family protein (SAS2203) from S. aureus MSSA476 is reported. The gene product of the sas2203 ORF of Staphylococcus aureus MSSA476 encodes a 30 kDa molecular-weight protein with a high sequence resemblance (29% identity) to tetrameric inositol monophosphatase from Thermotoga maritima. The protein was cloned, expressed, purified to homogeneity and crystallized. Crystals appeared in several conditions and good diffraction-quality crystals were obtained from 0.2 M Li 2 SO 4 , 20% PEG 3350, 0.1 M HEPES pH 7.0 using the sitting-drop vapour-diffusion method. A complete diffraction data set was collected to 2.6 Å resolution using a Rigaku MicroMax-007 HF Cu Kα X-ray generator and a Rigaku R-AXIS IV ++ detector. The diffraction data were consistent with the orthorhombic space group P2 1 2 1 2 1 , with unit-cell parameters a = 49.98, b = 68.35, c = 143.79 Å, α = β = γ = 90°, and the crystal contained two molecules in the asymmetric unit

SASqPCR: robust and rapid analysis of RT-qPCR data in SAS.

Directory of Open Access Journals (Sweden)

Daijun Ling

Full Text Available Reverse transcription quantitative real-time PCR (RT-qPCR is a key method for measurement of relative gene expression. Analysis of RT-qPCR data requires many iterative computations for data normalization and analytical optimization. Currently no computer program for RT-qPCR data analysis is suitable for analytical optimization and user-controllable customization based on data quality, experimental design as well as specific research aims. Here I introduce an all-in-one computer program, SASqPCR, for robust and rapid analysis of RT-qPCR data in SAS. This program has multiple macros for assessment of PCR efficiencies, validation of reference genes, optimization of data normalizers, normalization of confounding variations across samples, and statistical comparison of target gene expression in parallel samples. Users can simply change the macro variables to test various analytical strategies, optimize results and customize the analytical processes. In addition, it is highly automatic and functionally extendable. Thus users are the actual decision-makers controlling RT-qPCR data analyses. SASqPCR and its tutorial are freely available at http://code.google.com/p/sasqpcr/downloads/list.

SAS Enterprise Data Integration Server - A Complete Solution Designed To Meet the Full Spectrum of Enterprise Data Integration Needs

Directory of Open Access Journals (Sweden)

Silvia BOLOHAN

2012-05-01

Full Text Available This paper is about why is Data Integration important for organisations around the world. Organizations struggle daily with the challenges of large distributed data volumes, inconsistently defined data across disparate systems and the high expectations of data consumers who depend on information to be correct, complete and available when they need it. SAS Enterprise Data Integration Server provides a comprehensive solution that enables organizations to solve these challenges in a timely, cost-effective manner with the ability to efficiently manage data integration projects on an enterprise scale, increasing overall productivity and reducing the total cost of ownership.

Multivariate Welch t-test on distances

OpenAIRE

Alekseyenko, Alexander V.

2016-01-01

Motivation: Permutational non-Euclidean analysis of variance, PERMANOVA, is routinely used in exploratory analysis of multivariate datasets to draw conclusions about the significance of patterns visualized through dimension reduction. This method recognizes that pairwise distance matrix between observations is sufficient to compute within and between group sums of squares necessary to form the (pseudo) F statistic. Moreover, not only Euclidean, but arbitrary distances can be used. This method...

NParCov3: A SAS/IML Macro for Nonparametric Randomization-Based Analysis of Covariance

Directory of Open Access Journals (Sweden)

Richard C. Zink

2012-07-01

Full Text Available Analysis of covariance serves two important purposes in a randomized clinical trial. First, there is a reduction of variance for the treatment effect which provides more powerful statistical tests and more precise confidence intervals. Second, it provides estimates of the treatment effect which are adjusted for random imbalances of covariates between the treatment groups. The nonparametric analysis of covariance method of Koch, Tangen, Jung, and Amara (1998 defines a very general methodology using weighted least-squares to generate covariate-adjusted treatment effects with minimal assumptions. This methodology is general in its applicability to a variety of outcomes, whether continuous, binary, ordinal, incidence density or time-to-event. Further, its use has been illustrated in many clinical trial settings, such as multi-center, dose-response and non-inferiority trials.NParCov3 is a SAS/IML macro written to conduct the nonparametric randomization-based covariance analyses of Koch et al. (1998. The software can analyze a variety of outcomes and can account for stratification. Data from multiple clinical trials will be used for illustration.

[Evaluation of the factorial and metric equivalence of the Sexual Assertiveness Scale (SAS) by sex].

Science.gov (United States)

Sierra, Juan Carlos; Santos-Iglesias, Pablo; Vallejo-Medina, Pablo

2012-05-01

Sexual assertiveness refers to the ability to initiate sexual activity, refuse unwanted sexual activity, and use contraceptive methods to avoid sexually transmitted diseases, developing healthy sexual behaviors. The Sexual Assertiveness Scale (SAS) assesses these three dimensions. The purpose of this study is to evaluate, using structural equation modeling and differential item functioning, the equivalence of the scale between men and women. Standard scores are also provided. A total of 4,034 participants from 21 Spanish provinces took part in the study. Quota sampling method was used. Results indicate a strict equivalent dimensionality of the Sexual Assertiveness Scale across sexes. One item was flagged by differential item functioning, although it does not affect the scale. Therefore, there is no significant bias in the scale when comparing across sexes. Standard scores show similar Initiation assertiveness scores for men and women, and higher scores on Refusal and Sexually Transmitted Disease Prevention for women. This scale can be used on men and women with sufficient psychometric guarantees.

Assessment of SFR reactor safety issues: Part II: Analysis results of ULOF transients imposed on a variety of different innovative core designs with SAS-SFR

Energy Technology Data Exchange (ETDEWEB)

Kruessmann, R., E-mail: regina.kruessmann@kit.edu [Karlsruhe Institute of Technology, Institute of Neutron Physics and Reactor Technology INR, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Ponomarev, A.; Pfrang, W.; Struwe, D. [Karlsruhe Institute of Technology, Institute of Neutron Physics and Reactor Technology INR, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Champigny, J.; Carluec, B. [AREVA, 10, rue J. Récamier, 69456 Lyon Cedex 06 (France); Schmitt, D.; Verwaerde, D. [EDF R& D, 1 avenue du général de Gaulle, 92140 Clamart (France)

2015-04-15

Highlights: • Comparison of different core designs for a sodium-cooled fast reactor. • Safety assessment with the code system SAS-SFR. • Unprotected Loss of Flow (ULOF) scenario. • Sodium boiling and core melting cannot be avoided. • A net negative Na void effect provides more grace time prior to local SA destruction. - Abstract: In the framework of cooperation agreements between KIT-INR and AREVA SAS NP as well as between KIT-INR and EDF R&D in the years 2008–2013, the evaluation of severe transient behavior in sodium-cooled fast reactors (SFRs) was investigated. In Part I of this contribution, the efficiency of newly conceived prevention and mitigation measures was investigated for unprotected loss-of-flow (ULOF), unprotected loss-of-heat-sink (ULOHS) and the unprotected transient-overpower (UTOP) transients. In this second part, consequence analyses were performed for the initiation phase of different unprotected loss-of-flow (ULOF) scenarios imposed on a variety of different core design options of SFRs. The code system SAS-SFR was used for this purpose. Results of analyses for cases postulating unavailability of prevention measures as shut-down systems, passive and/or active additional devices show that entering into an energetic power excursion as a consequence of the initiation phase of a ULOF cannot be avoided for those core designs with a cumulative void reactivity feedback larger than zero. However, even for core designs aiming at values of the void reactivity less than zero it is difficult to find system design characteristics which prevent the transient entering into partial core destruction. Further studies of the transient core and system behavior would require codes dedicated to specific aspects of transition phase analyses and of in-vessel material relocation analyses.

Moving-Bed Process for Residue Hydrotreating Procédé à lit mobile pour l'hydrotraitement des résidus

Directory of Open Access Journals (Sweden)

Euzen J. P.

2006-11-01

the solid particles during the sequential withdrawal. It is the reason why the movement of the solid and, moreover, the residence time distribution of the catalyst particles have been especially followed. To this end, a new technique has been developed to measure the concentration of magnetically marked particles. Furthermore, a specific effort has been devoted to technological problems such as selection and developement of special valves able to insure efficient tightness between the various sections at elevated temperatures and pressures in the presence of solid particles. Another study has been devoted to the operation of addition and withdrawal of the catalyst to and from the reactor running at high pressure and temperature. The solid flows and the catalyst transfer conditions have been carefully studied and tested. Finally a demonstration unit has been built at a semi-industrial scale in a mini-refinery. It was a convincing way to check all the conclusions drawed from the developement step with models, smaller scale pilots and mock-ups. As the fluids and the catalyst were real industrial products, the feasibility of the whole process has been demonstrated. Therefore, a new industrial process using the countercurrent moving bed is now available and permits a very efficient use of the catalyst particles. Un grand nombre de procédés chimiques, pétrochimiques ou de raffinage nécessitent un contact entre 3 phases : un produit de base liquide, un réactif gazeux et un catalyseur solide. Il arrive souvent que l'activité du catalyseur soit réduite par un empoisonnement des sites actifs ou par des dépôts de coke. C'est particulièrement le cas des procédés utilisés dans l'hydrotraitement des résidus lourds. La durée de vie du catalyseur étant réduite, il est nécessaire de remplacer ou de régénérer fréquemment le catalyseur devenu inactif. Différentes solutions permettent d'effectuer ce travail tout en limitant les pertes de temps et de production

Utilization of the RELAP4/MOD5/SAS code version in loss of coolant accident in the Angra 1 nuclear power station

International Nuclear Information System (INIS)

Sabundjian, G.; Freitas, R.L.

1991-09-01

A new version of computer code RELAP4/MOD5 was developed to improve the output. The new version, called RELAP4/MOD5/SAS, prints the main variables in graphical form. In order to check the program, a 36 - volume simulation of the Loss-of-Coolant Accident for Angra - I was performed and the results compared to those of a existing 44 - volume simulation showed a satisfactory agreement with a substantial reduction in computing time. (author)

Análisis de las causas de rotación de personal de la empresa Holcrest S.A.S

OpenAIRE

Domínguez Olaya, María Katherine

2015-01-01

La retención del personal es una parte importante de los esfuerzos del área de recursos humanos y de la organización en general, ya que la desvinculación representa costos y daño de la imagen organizacional. Es así como el estudio y análisis de la retención de personal se ha convertido en parte de la gestión organizacional. Con la presente investigación se busca analizar las causas que inciden en la rotación de personal en la empresa prestadora de servicios del grupo Holcim, Holcrest S.A.S, u...

The zebrafish maternal-effect gene cellular atoll encodes the centriolar component sas-6 and defects in its paternal function promote whole genome duplication.

Science.gov (United States)

Yabe, Taijiro; Ge, Xiaoyan; Pelegri, Francisco

2007-12-01

A female-sterile zebrafish maternal-effect mutation in cellular atoll (cea) results in defects in the initiation of cell division starting at the second cell division cycle. This phenomenon is caused by defects in centrosome duplication, which in turn affect the formation of a bipolar spindle. We show that cea encodes the centriolar coiled-coil protein Sas-6, and that zebrafish Cea/Sas-6 protein localizes to centrosomes. cea also has a genetic paternal contribution, which when mutated results in an arrested first cell division followed by normal cleavage. Our data supports the idea that, in zebrafish, paternally inherited centrosomes are required for the first cell division while maternally derived factors are required for centrosomal duplication and cell divisions in subsequent cell cycles. DNA synthesis ensues in the absence of centrosome duplication, and the one-cycle delay in the first cell division caused by cea mutant sperm leads to whole genome duplication. We discuss the potential implications of these findings with regards to the origin of polyploidization in animal species. In addition, the uncoupling of developmental time and cell division count caused by the cea mutation suggests the presence of a time window, normally corresponding to the first two cell cycles, which is permissive for germ plasm recruitment.

tran-SAS v1.0: a numerical model to compute catchment-scale hydrologic transport using StorAge Selection functions

Directory of Open Access Journals (Sweden)

P. Benettin

2018-04-01

Full Text Available This paper presents the tran-SAS package, which includes a set of codes to model solute transport and water residence times through a hydrological system. The model is based on a catchment-scale approach that aims at reproducing the integrated response of the system at one of its outlets. The codes are implemented in MATLAB and are meant to be easy to edit, so that users with minimal programming knowledge can adapt them to the desired application. The problem of large-scale solute transport has both theoretical and practical implications. On the one side, the ability to represent the ensemble of water flow trajectories through a heterogeneous system helps unraveling streamflow generation processes and allows us to make inferences on plant–water interactions. On the other side, transport models are a practical tool that can be used to estimate the persistence of solutes in the environment. The core of the package is based on the implementation of an age master equation (ME, which is solved using general StorAge Selection (SAS functions. The age ME is first converted into a set of ordinary differential equations, each addressing the transport of an individual precipitation input through the catchment, and then it is discretized using an explicit numerical scheme. Results show that the implementation is efficient and allows the model to run in short times. The numerical accuracy is critically evaluated and it is shown to be satisfactory in most cases of hydrologic interest. Additionally, a higher-order implementation is provided within the package to evaluate and, if necessary, to improve the numerical accuracy of the results. The codes can be used to model streamflow age and solute concentration, but a number of additional outputs can be obtained by editing the codes to further advance the ability to understand and model catchment transport processes.

tran-SAS v1.0: a numerical model to compute catchment-scale hydrologic transport using StorAge Selection functions

Science.gov (United States)

Benettin, Paolo; Bertuzzo, Enrico

2018-04-01

This paper presents the tran-SAS package, which includes a set of codes to model solute transport and water residence times through a hydrological system. The model is based on a catchment-scale approach that aims at reproducing the integrated response of the system at one of its outlets. The codes are implemented in MATLAB and are meant to be easy to edit, so that users with minimal programming knowledge can adapt them to the desired application. The problem of large-scale solute transport has both theoretical and practical implications. On the one side, the ability to represent the ensemble of water flow trajectories through a heterogeneous system helps unraveling streamflow generation processes and allows us to make inferences on plant-water interactions. On the other side, transport models are a practical tool that can be used to estimate the persistence of solutes in the environment. The core of the package is based on the implementation of an age master equation (ME), which is solved using general StorAge Selection (SAS) functions. The age ME is first converted into a set of ordinary differential equations, each addressing the transport of an individual precipitation input through the catchment, and then it is discretized using an explicit numerical scheme. Results show that the implementation is efficient and allows the model to run in short times. The numerical accuracy is critically evaluated and it is shown to be satisfactory in most cases of hydrologic interest. Additionally, a higher-order implementation is provided within the package to evaluate and, if necessary, to improve the numerical accuracy of the results. The codes can be used to model streamflow age and solute concentration, but a number of additional outputs can be obtained by editing the codes to further advance the ability to understand and model catchment transport processes.

Clinical endometritis in an Argentinean herd of dairy cows: risk factors and reproductive efficiency.

Science.gov (United States)

Giuliodori, M J; Magnasco, R P; Becu-Villalobos, D; Lacau-Mengido, I M; Risco, C A; de la Sota, R L

2013-01-01

The objectives of this study were to assess the clinical and metabolic risk factors for clinical endometritis, the likelihood for having a normal vaginal discharge during postpartum, and the effects of endometritis on milk yield, reproductive efficiency, and metabolic status in Holstein cows. The study was conducted in a commercial dairy herd (Cordoba, Argentina) where 303 Holstein cows were enrolled. Cows were body condition scored (1 to 5) and tail bled on -14, 7, 21, 31, 41, and 50 d relative to parturition. Cows having a vaginal discharge with presence of pus between 21 and 41 d postpartum (dpp) were diagnosed as having clinical endometritis. Plasma blood samples were analyzed for nonesterified fatty acids (NEFA), β-hydroxybutyrate (BHBA), and blood urea nitrogen using commercial kits and insulin-like growth factor 1, insulin, and leptin by RIA. Data were analyzed with PROC MIXED, PROC GENMOD, and PROC PHREG of SAS (SAS Institute Inc., Cary, NC). Abnormal calving and puerperal metritis increased the risk for endometritis [adjusted odds ratio (AOR)=2.21 for both]. High prepartum NEFA and high postpartum BHBA increased the risk for endometritis (AOR=1.003 and 1.001, respectively), whereas high prepartum blood urea nitrogen reduced it (AOR=0.853). Cut-offs of 456.6 μM NEFA and 402.5 μM BHBA had sensitivities of 0.69 and 0.58, and specificities of 0.88 and 0.86, respectively. The likelihood for having normal vaginal discharge increased with time (∼1% × dpp) and with normal calving. Cows with endometritis had higher milk yield than normal herdmates (27.8±0.9 vs. 25.7±0.4 kg/d), lower risk for pregnancy by 100 dpp (AOR=0.10), higher nonpregnancy risk by 200 dpp (AOR=2.87), and higher risk for culling than normal cows (AOR=2.28). Cows with endometritis had a lower hazard rate (0.44) for pregnancy and had approximately 70 d longer calving-to-conception intervals. Finally, endometritis had no effect on metabolic hormones. In conclusion, the risk for clinical

A Comprehensive Model of the Dry Desulphurisation Process Une modélisation non empirique du procédé de désulfuration par voie sèche

Directory of Open Access Journals (Sweden)

Flament P.

2006-11-01

Full Text Available Due to the high investment cost of the wet scrubbing, the dry desulphurisation process remains an attractive way to remove sulphur dioxide when reduction level should not be higher than 90%. In this technique, the SO2 is removed from flue gases by direct injection of small calcium based sorbents such as calcium carbonate (CaCO3 or calcium hydroxide (Ca(OH² . The sorbent is first transformed into calcium oxide (CaO before reacting with SO2 to form a stable calcium sulphate (CaSO4. Although the global reactions are rather simple, a full description of the mechanism requires the knowledge of both, the initial physical properties of the sorbent and the evolution of these properties during the reaction. Furthermore, the way how particles are injected and dispersed into the SO2 containing gases is also a major issue of the dry desulphurisation process. Both aspects are considered in this paper since a specialised routine was build to describe the calcination-sulphation process and coupled with the KIVA code to perform 3D calculations under real industrial conditions. The desulphurisation model was first tested alone using the kinetic data of the International Flame Research Foundation and then, coupled with KIVA to simulate the desulphurisation process in a new type of boiler which is developed by BABCOCK Entreprise and the Institut Français du Pétrole (the AUDE boiler. In this last case, the objective was to determine the sorbent injection locations leading to the highest desulphurisation efficiencies. As the dispersion of particles is an important parameter of the desulphurisation process, an example of validation of the KIVA dispersion model is also presented in this paper. For the selected test case, i. e: particle dispersion in a plane mixing layer, a good agreement was found between the experimental results of Ando et al (1990 and the calculations performed with KIVA. Par suite du coût d'investissement très élevé du procédé de lavage

Contribution au développement d'un procédé de stabilisation d'une boisson à base d'eau et de sirop d'érable par la technologie d'électro-activation en solution

OpenAIRE

Koffi, Kouassi

2013-01-01

Le développement de nouveaux moyens pour traiter les denrées et produits agroalimentaires par l'utilisation des techniques électrochimiques a déjà joué un rôle important dans nombres de procédés. Parmi ces techniques électrochimiques, l’électro-activation, constitue à ce jour une voie nouvelle pour le traitement et l’amélioration de la qualité de produits et de solutions aqueuses en industrie agroalimentaire. L’électro-activation est dite «reagentless technology», c’est-à-dire une technologie...

Overly long centrioles and defective cell division upon excess of the SAS-4-related protein CPAP.

Science.gov (United States)

Kohlmaier, Gregor; Loncarek, Jadranka; Meng, Xing; McEwen, Bruce F; Mogensen, Mette M; Spektor, Alexander; Dynlacht, Brian D; Khodjakov, Alexey; Gönczy, Pierre

2009-06-23

The centrosome is the principal microtubule organizing center (MTOC) of animal cells. Accurate centrosome duplication is fundamental for genome integrity and entails the formation of one procentriole next to each existing centriole, once per cell cycle. The procentriole then elongates to eventually reach the same size as the centriole. The mechanisms that govern elongation of the centriolar cylinder and their potential relevance for cell division are not known. Here, we show that the SAS-4-related protein CPAP is required for centrosome duplication in cycling human cells. Furthermore, we demonstrate that CPAP overexpression results in the formation of abnormally long centrioles. This also promotes formation of more than one procentriole in the vicinity of such overly long centrioles, eventually resulting in the presence of supernumerary MTOCs. This in turn leads to multipolar spindle assembly and cytokinesis defects. Overall, our findings suggest that centriole length must be carefully regulated to restrict procentriole number and thus ensure accurate cell division.

Procès inquisitorial contra el castellà d'Amposta Fra Pedro Roiç de Moros a la cúria pontificia del papa Benet XIII (I414-1418

Directory of Open Access Journals (Sweden)

Alanyà i Roig, Josep

2002-06-01

Full Text Available The Arxiu de la Corona d'Aragó in Barcelona houses the original commital proceedings instituted by a court of cardinals set up by pope Benedict XIII in the year 1414 and teh trial itself of the lord of Amposta, Fra Pedro Roiç de Moros, knight of the Order of St. John of Jerusalem, who had been charged with indictable offences—concubinage, robbery, housing apostates, oath breaking and counterfeiting money, mismanagement of the Castlery's assets, excesses against his vassals, wasteful use of assets, dereliction and property abandonment— of which he was found guilty, and thereafter sentenced to losing the dignity of his lordship. Roiç de Moros appealed to the Council of Constance as well as to pope Martin V. It would be to no avail. Roiç de Moros paid a very high price for choosing to support count Jaume d'Urgell and deciding to oppose Ferran dAntequera and the policies of pope Benedict XIII. The follow up and analysis of the court´s records are very interesting for their human variety and interesting informations about fortresses, houses, barns, treaures and services there were in different locations of the Castlery of Amposta, such as Batea, Gandesa, Miravet, Ulldecona, Ascó and other towns and villages along the Ribera d´Ebre. The whole criminal prosecution bears a very peculiar historic interest mainly because the protagonists, the court procedures, and their causes are the link between the Interregnum in the Aragonese Crown and the fìnal days of the Western Schism.

A l'Arxiu de la Corona d'Aragó de Barcelona es conserva el procés original instruït per un tribunal de cardenals creat pel papa Benet XIII l'any 1414 per jutjar el Castella d'Amposta, l'hospitaler Fra Pedro Roiç de Moros, acusat de crims greus —concubinat, bandositats, recepció d’apòstates, perjuri i fabricació de moneda falsa, mala administració dels bens de la Castellania, comissió d'excessos contra els seus vassalls, dilapidado de bens i abando

Diseño de una estrategia que posicione a Transporte Comercial la Estrella SAS como una empresa mas competitiva en el sector transporte

OpenAIRE

Cifuentes Amaya, Mauricio Andrés

2017-01-01

La elaboración de este proyecto busca explicar los factores que actualmente afectan al sector transporte (Costos elevados, sobreoferta, chatarrización, fletes elevados, hacinamiento, Etc.) y, a partir de esto, diseñar estrategias que le permitan a la empresa de transporte: TRANSPORTE COMERCIAL LA ESTRELLA SAS, convertirse en una empresa más competitiva dentro del sector en el que se desenvuelve. El planteamiento estratégico estudiado se fundamenta en el modelo de las 5 fuerzas de Michael P...

Impact of sacubitril-valsartan combination in patients with chronic heart failure and sleep apnoea syndrome: the ENTRESTO-SAS study design.

Science.gov (United States)

Jaffuel, Dany; Molinari, Nicolas; Berdague, Philippe; Pathak, Atul; Galinier, Michel; Dupuis, Marion; Ricci, Jean-Etienne; Mallet, Jean-Pierre; Bourdin, Arnaud; Roubille, François

2018-06-01

Sleep-disordered breathing (SDB) is a highly prevalent co-morbidity in patients with chronic heart failure (CHF) and can play a detrimental role in the pathophysiology course of CHF. However, the best way to manage SDB in CHF remains a matter of debate. Sacubitril-valsartan has been included in the 2016 European Society of Cardiology guidelines as an alternative to angiotensin-converting enzyme inhibitors to further reduce the risk of progression of CHF, CHF hospitalization, and death in ambulatory patients. Sacubitril and valsartan are good candidates for correcting SDB of CHF patients because their known mechanisms of action are likely to counteract the pathophysiology of SDB in CHF. The ENTRESTO-SAS trial is a 3-month, multicentric, prospective, open-label real-life cohort study. Patients eligible for sacubitril-valsartan treatment (i.e. adults with left ventricular ejection fraction ≤35%, who remain symptomatic despite optimal treatment with an angiotensin-converting enzyme inhibitor, a beta-blocker, and a mineralocorticoid receptor antagonist) will be evaluated before and after 3 months of treatment (nocturnal ventilatory polygraphy, echocardiography, laboratory testing, and quality-of-life and SDB questionnaires). The primary outcome is the change in the Apnoea-Hypopnoea Index, before and after 3 months of treatment. One hundred twenty patients are required to detect a significant 20% improvement of the Apnoea-Hypopnoea Index with a power of 90% at an alpha risk of 5%. In the context of the SERVE-HF study, physicians are waiting for new trials and alternative therapies. We sought to assess in the ENTRESTO-SAS trial whether sacubitril-valsartan could improve the outcome of SDB in CHF patients. © 2018 The Authors. ESC Heart Failure published by John Wiley & Sons Ltd on behalf of the European Society of Cardiology.

Fibrinogen species as resolved by HPLC-SAXS data processing within the UltraScan Solution Modeler (US-SOMO) enhanced SAS module.

Science.gov (United States)

Brookes, Emre; Pérez, Javier; Cardinali, Barbara; Profumo, Aldo; Vachette, Patrice; Rocco, Mattia

2013-12-01

Fibrinogen is a large heterogeneous aggregation/degradation-prone protein playing a central role in blood coagulation and associated pathologies, whose structure is not completely resolved. When a high-molecular-weight fraction was analyzed by size-exclusion high-performance liquid chromatography/small-angle X-ray scattering (HPLC-SAXS), several composite peaks were apparent and because of the stickiness of fibrinogen the analysis was complicated by severe capillary fouling. Novel SAS analysis tools developed as a part of the UltraScan Solution Modeler ( US-SOMO ; http://somo.uthscsa.edu/), an open-source suite of utilities with advanced graphical user interfaces whose initial goal was the hydrodynamic modeling of biomacromolecules, were implemented and applied to this problem. They include the correction of baseline drift due to the accumulation of material on the SAXS capillary walls, and the Gaussian decomposition of non-baseline-resolved HPLC-SAXS elution peaks. It was thus possible to resolve at least two species co-eluting under the fibrinogen main monomer peak, probably resulting from in-column degradation, and two others under an oligomers peak. The overall and cross-sectional radii of gyration, molecular mass and mass/length ratio of all species were determined using the manual or semi-automated procedures available within the US-SOMO SAS module. Differences between monomeric species and linear and sideways oligomers were thus identified and rationalized. This new US-SOMO version additionally contains several computational and graphical tools, implementing functionalities such as the mapping of residues contributing to particular regions of P ( r ), and an advanced module for the comparison of primary I ( q ) versus q data with model curves computed from atomic level structures or bead models. It should be of great help in multi-resolution studies involving hydrodynamics, solution scattering and crystallographic/NMR data.

SAS and SPSS macros to calculate standardized Cronbach's alpha using the upper bound of the phi coefficient for dichotomous items.

Science.gov (United States)

Sun, Wei; Chou, Chih-Ping; Stacy, Alan W; Ma, Huiyan; Unger, Jennifer; Gallaher, Peggy

2007-02-01

Cronbach's a is widely used in social science research to estimate the internal consistency of reliability of a measurement scale. However, when items are not strictly parallel, the Cronbach's a coefficient provides a lower-bound estimate of true reliability, and this estimate may be further biased downward when items are dichotomous. The estimation of standardized Cronbach's a for a scale with dichotomous items can be improved by using the upper bound of coefficient phi. SAS and SPSS macros have been developed in this article to obtain standardized Cronbach's a via this method. The simulation analysis showed that Cronbach's a from upper-bound phi might be appropriate for estimating the real reliability when standardized Cronbach's a is problematic.

Les procès contre le sanctuaire Yasukuni The trials of WW2 veterans’ families against the Yasukuni shrine

Directory of Open Access Journals (Sweden)

Nobumasa Tanaka

2010-07-01

Full Text Available Le sanctuaire Yasukuni a été fondé à Tôkyô en 1869 par l’empereur Meiji pour célébrer la mémoire des guerriers japonais tombés au combat pour l’empereur et la patrie. Etablissement religieux chargé d’honorer les hauts faits de ces « âmes héroïques », il fut longtemps le symbole du militarisme japonais. Or, parmi les familles qui ont perdu l’un des leurs au cours de la guerre d’agression menée par le Japon en Asie, certaines ont engagé des poursuites contre l’administration du Yasukuni, afin d’obtenir que les noms de leurs proches soient radiés des listes du sanctuaire. Cet article retrace l’historique des procès engagés par ces familles, en examinant au passage les plaintes déposées contre le caractère anticonstitutionnel des visites répétées du Premier ministre Koizumi au Yasukuni.The Yasukuni shrine was founded in Tokyo in 1868 by the Emperor Meiji to celebrate the memory of Japanese warriors fallen during battles for the Emperor and the country. As religious institution devoted to honor these “brave souls”, it became the symbol of Japanese militarism. However, among the families who lost relatives during the war, some have sued the administration of Yasukuni to get the names of their relatives deleted from the lists of the shrine. This article describes the genesis of those trials and exams also the anti-constitutional nature of the repeated visits of Prime Minister Koizumi to Yasukuni.

Diseño de un plan estratégico en el Instituto de Enfermedades Autoinmunes Renato Guzmán - IDEARG S.A.S.

OpenAIRE

Jiménez Serrano, Lorena; Ortegon Lancheros, Carolina

2012-01-01

IDEARG S.A.S es una Institución Prestadora de Servicios de Salud dedicada a la atención de pacientes con enfermedades autoinmunes. Dentro de su ordenación se encuentra una planta de personal organizada y comprometida con el progreso de la empresa. Sin embargo, existe una sentida necesidad de implementar estrategias que permitan el fortalecimiento interno de la institución y su posicionamiento en el mercado como una de las empresas de mayor prestigio en su campo de acción. Resulta oportuno...

Démonstration du procédé IFP de désulfuration des fumées de centrales Demonstration of the Ifp Stack-Gas Desulfurization Process

Directory of Open Access Journals (Sweden)

Busson C.

2006-11-01

Full Text Available Les produits pétroliers et le charbon continueront à couvrir les besoins énergétiques pendant plusieurs décennies. La pollution par le SOZ, provenant de la combustion de ces combustibles fossiles, devient une préoccupation pour la population et les Pouvoirs publics. La désulfuration des fumées de combustion devrait, à plus ou moins longue échéance, se développer. L'Institut Français du Pétrole (IFP, mettant à profit ses travaux dans le domaine de la désulfuration, a développé un procédé de traitement des fumées. L'IFP, en collaboration avec Électricité de France (EDF, a effectué en 1976 une opération de démonstration à une échelle pilote (30 MW dans la Centrale de Champagne-sur-Oise. Le procédé consiste à éliminer le S02 des fumées par lavage avec une solution ammoniacale, à produire du soufre à partir de la liqueur obtenue et à recycler l'ammoniaque dans l'étape de lavage. Après quelques modifications d'ordre technologique, l'unité de démonstration a fonctionné d'une manière continue pendant une période de trois mois, correspondant à l'objectif fixé. Les résultats obtenus permettent, actuellement, d'envisager une application de cette technique à une échelle de 250 MW. Oil and coal productswill continue to fulfill energy needs for several more decades. Pollution by SO2 coming from the combustion of such fossil fuels is becoming a preoccupation for the population and the public authorities. The desulfurization of combustion fumes should continue ta develop in the more or less long run. Institut Français du Pétrole (IFP has taken advantage of its research in the fixed of desulfurization to develop a stock-gas treating process. In collaboration with Électricite de Fronce (EDF, IFP carried out a demonsiration operation in 1976 on a pilot-plant scale (30MW in a power plant at Champagne-sur-Oise. The process consists in removing S02 from stock gases by scrubbing them with an ammonia solution

Estudo das curvas de crescimento de cordeiros das raças santa inês e bergamácia considerando heterogeneidade de variâncias Growth functions of Santa Inês and Bergamacy lambs considering heteroscedastic variance

Directory of Open Access Journals (Sweden)

Marlon Henrique Paiva Guedes

2004-04-01

Full Text Available Funções de crescimento não-lineares foram ajustados a dados de peso-idade de 40 cordeiros das raças Santa Inês e Bergamácia. Pelos testes de Hartley e de Bartlett, verificou-se que os dados apresentavam heterogeneidade de variâncias; em função disso, ajustaram-se as funções de crescimento pelo método dos quadrados mínimos ponderado pelo inverso da variância dos pesos a cada pesagem utilizando a opção WEIGTH do PROC MODEL (SAS INSTITUTE, 1996. As funções de crescimento foram comparadas pela interpretação biológica dos parâmetros e pelos indicadores de qualidade do ajuste (coeficiente de determinação ajustado, quadrado médio do resíduo e teste de Durbin-Watson. As funções de von Bertalanffy e Gompertz apresentaram a melhor qualidade de ajuste, ao passo que as funções de Richards, Logística e Brody não se mostraram adequadas para descrever o crescimento dos animais por apresentarem estimativas não condizentes com a realidade.Non linear growth functions were fitted to weight-age data of 40 Santa Inês and Bergamacy lambs. The Hartley and Bartlett tests indicated that the data presented heteroscedastic variance, so the growth functions were fitted through weighted minimum square method by the inverse variance weight in each sampler using the WEIGHT option in PROC MODEL (SAS INSTITUTE, 1996. The functions were compared using the biological interpretation of the parameters and the quality indicators of fit (adjusted determination coefficient, mean square error and Durbin-Watson test. The von Bertalanffy and Gompertz functions provided the best fittings, whereas Richards, Logistic and Brody functions turned out not to be suitable for describing growth behavior, became estimates based on them do not agree with observation.

Gènere i TIC: el procés d’autoinclusió de les dones en les TIC. Una aproximació des de les tecnòlogues artístiques i les tecnòlogues informàtiques

OpenAIRE

Vergés Bosch, Núria

2012-01-01

En aquesta tesi s'analitza el procés d'autoinclusió de les dones en les TIC, entès com una estratègia on les dones se situen com agents conductores de la seva pròpia inclusió TIC. Per una banda, té per objectiu explorar la relació gènere i TIC. Per altra banda, conèixer les estratègies d'autoinclusió, és a dir, les principals motivacions, possibilitadors i mecanismes d'autoinclusió que hi intervenen. Finalment, es busca comparar aquestes qüestions per a les tecnòlogues artístiques i les tecnò...

Neutron and X-ray small angle scattering (S.A.S.) study of the amorphous alloy Tbsub(.25)Cusub(.75)

International Nuclear Information System (INIS)

Boucher, B.

1980-07-01

The magnetic properties of amorphous alloys REsub(x) Msub(x-1) (R.E.=heavy rare earths, M=Cu, Ag, Au) have been widely studied. They are of the speromagnetic type for x>=0.33 and are mictomagnetic for x -12 cm). Also the atomic volume of Terbium (approximately 33 A 3 ) is almost three times that of Copper (11.8 A 3 ) and Cu is less absorbant than Ag or Au. Tb alloys exhibit high magnetic ordering temperatures and important moments in contrast to the majority of other alloys of the same family. One inconvenience with Terbium, however, is the large (X-ray) fluorescence (lambda Cu). In order to confirm some interpretations of S.A.S., we were obliged to determine some physical parameters such as the density and porosity and to examine the sample with microscope. These results are also given here

Mediation analysis allowing for exposure-mediator interactions and causal interpretation: theoretical assumptions and implementation with SAS and SPSS macros

Science.gov (United States)

Valeri, Linda; VanderWeele, Tyler J.

2012-01-01

Mediation analysis is a useful and widely employed approach to studies in the field of psychology and in the social and biomedical sciences. The contributions of this paper are several-fold. First we seek to bring the developments in mediation analysis for non linear models within the counterfactual framework to the psychology audience in an accessible format and compare the sorts of inferences about mediation that are possible in the presence of exposure-mediator interaction when using a counterfactual versus the standard statistical approach. Second, the work by VanderWeele and Vansteelandt (2009, 2010) is extended here to allow for dichotomous mediators and count outcomes. Third, we provide SAS and SPSS macros to implement all of these mediation analysis techniques automatically and we compare the types of inferences about mediation that are allowed by a variety of software macros. PMID:23379553

Diagnostico organizacional y formulación del plan estratégico de desarrollo para la empresa WPA Fauna y Ambiente S.A.S

OpenAIRE

Garavito Garavito, Gustavo Alfonso

2017-01-01

La presente oferta de servicios comprende la elaboración del diagnóstico Organizacional y formulación del plan estratégico de desarrollo para la empresa WPA Fauna y Ambiente S.A.S, utilizando modelos de administración tales como; el modelo Pestel, el modelo de Kast–Rozeinsweig, el modelo de cinco fuerzas de Porter, complementado con un análisis (DOFA) para así, a partir del análisis de los hallazgos formular el plan de desarrollo que permita a la organización enfocarse en una estrategia de me...

Excessive gestational weight gain in first trimester is a risk factor for exacerbation of asthma during pregnancy

DEFF Research Database (Denmark)

Ali, Zarqa; Nilas, Lisbeth; Ulrik, Charlotte Suppli

2018-01-01

BACKGROUND: Acute exacerbation during pregnancy is the most important risk factor for an unfavorable outcome of pregnancy in women with asthma. OBJECTIVE: We sought to identify pregnancy-related risk factors for acute exacerbations of asthma during pregnancy. METHODS: Since 2007, all pregnant women...... referred to give birth at Hvidovre Hospital, Denmark, have been offered participation in the prospective Management of Asthma during Pregnancy (MAP) program. Women were included in the present analysis if they fulfilled the following criteria: (1) diagnosed with asthma, (2) prescribed at least rescue...... bronchodilator, and (3) had the first visit to the respiratory outpatient clinic within the first 18 weeks of pregnancy. Data were analyzed using multiple logistic regression models with backward stepwise elimination (Proc Logistic procedure in SAS). RESULTS: Over an 8-year study period, a total of 1283...

Cosmic radiation and airline pilots. Exposure patterns of Norwegian pilots flying aircraft not used by SAS

International Nuclear Information System (INIS)

Tveten, U.

1997-05-01

The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots flying a great diversity of different aircrafts. Aircrafts that appear in the time-tables of the Scandinavian Airline System (SAS) have been treated in an earlier report. The results presented in this report (radiation doserates for the different types of aircrafts in the different years) will, in a later stage of the project be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for the work in this report is information provided by several active pilots, members of the Pilots Associations, along with calculations performed using US Federal Aviation Administration's computer code CARI-3N. 2 refs

Cosmic radiation and airline pilots. Exposure patterns of Norwegian pilots flying aircraft not used by SAS

Energy Technology Data Exchange (ETDEWEB)

Tveten, U.

1997-05-01

The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots flying a great diversity of different aircrafts. Aircrafts that appear in the time-tables of the Scandinavian Airline System (SAS) have been treated in an earlier report. The results presented in this report (radiation doserates for the different types of aircrafts in the different years) will, in a later stage of the project be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for the work in this report is information provided by several active pilots, members of the Pilots Associations, along with calculations performed using US Federal Aviation Administration`s computer code CARI-3N. 2 refs.

Plan de mejoramiento para el área de logística a nivel local de la compañía RotamAgrochemical Colombia S.A.S.

OpenAIRE

Gómez Susa, Martha Jannett; Morales Valero, Nadine Stella; Mosquera López, Diana Milena

2013-01-01

El trabajo pretende diseñar un plan de mejoramiento en el área logística que agregue valor, aumente la eficiencia y mejore los procesos de almacenamiento y distribución, gestión de inventarios y control de los productos agroquímicos de la Compañía RotamAgrochemical Colombia S.A.S., se formulan algunas recomendaciones para el mejoramiento de los procesos en las Áreas de almacenamiento, inventarios y seguridad industrial

« parce que son papa, madame Grégory a fait un civet, un civet avec le papa » Sur les procédures d’apprentissage du lexique : reprise et reformulation en langage oral à l’école maternelle

Directory of Open Access Journals (Sweden)

Péroz Pierre

2014-07-01

Full Text Available A l’école maternelle, les enfants n’ont pas les compétences métalinguistiques qui leur permettraient de convoquer aisément l’image du mot isolé, voire d’imaginer ses contextes d’emplois ou ses différentes acceptions, comme peuvent le faire les apprenants qui sont déjà des lecteurs-scripteurs. De ce fait, les travaux sur l’apprentissage du lexique en contexte scolaire ne portent généralement pas sur la période pré-élémentaire. Comment les élèves apprennent-ils le vocabulaire qu’on leur présente au fil des séances disciplinaires ? Comment apprennent-ils des mots nouveaux, ou comment apprennent-ils les emplois différents des mots qu’ils connaissent déjà ? La communication présente les résultats de l’analyse d’un corpus transcrit d’une analyse d’une quinzaine de séances de langage en grande et en moyenne section. Elle montre que les procédures de reprise ou de reformulation qui sont à l’origine de l’apprentissage du lexique reposent essentiellement sur des mécanismes interactionnels, quel que soit le niveau des élèves. Plus les élèves sont faibles plus, ils ont besoin du matériel verbal déjà présent dans les échanges pour construire leurs propres interventions. Mais, c’est la même procédure que mobilisent les meilleurs élèves, à ceci près qu’ils sont capables aussi dans le même temps de l’appliquer à leur propre intervention. En s’appuyant sur des éléments verbaux déjà donnés et en reformulant des propositions qu’ils ont eux-mêmes construites, ils sont capables d’introduire dans des contextes adaptés des termes nouveaux dans leur intervention. Ce faisant, ils construisent les interventions les plus longues mais aussi qualitativement les plus intéressantes sur le plan lexical. Mais qu’on ne se méprenne pas, pour l’ensemble des élèves, c’est le développement de leurs compétences langagières, leur capacité à interagir avec les autres, qui est

Analyzing Repeated Measures Marginal Models on Sample Surveys with Resampling Methods

Directory of Open Access Journals (Sweden)

James D. Knoke

2005-12-01

Full Text Available Packaged statistical software for analyzing categorical, repeated measures marginal models on sample survey data with binary covariates does not appear to be available. Consequently, this report describes a customized SAS program which accomplishes such an analysis on survey data with jackknifed replicate weights for which the primary sampling unit information has been suppressed for respondent confidentiality. First, the program employs the Macro Language and the Output Delivery System (ODS to estimate the means and covariances of indicator variables for the response variables, taking the design into account. Then, it uses PROC CATMOD and ODS, ignoring the survey design, to obtain the design matrix and hypothesis test specifications. Finally, it enters these results into another run of CATMOD, which performs automated direct input of the survey design specifications and accomplishes the appropriate analysis. This customized SAS program can be employed, with minor editing, to analyze general categorical, repeated measures marginal models on sample surveys with replicate weights. Finally, the results of our analysis accounting for the survey design are compared to the results of two alternate analyses of the same data. This comparison confirms that such alternate analyses, which do not properly account for the design, do not produce useful results.

A survival analysis on critical components of nuclear power plants

International Nuclear Information System (INIS)

Durbec, V.; Pitner, P.; Riffard, T.

1995-06-01

Some tubes of heat exchangers of nuclear power plants may be affected by Primary Water Stress Corrosion Cracking (PWSCC) in highly stressed areas. These defects can shorten the lifetime of the component and lead to its replacement. In order to reduce the risk of cracking, a preventive remedial operation called shot peening was applied on the French reactors between 1985 and 1988. To assess and investigate the effects of shot peening, a statistical analysis was carried on the tube degradation results obtained from in service inspection that are regularly conducted using non destructive tests. The statistical method used is based on the Cox proportional hazards model, a powerful tool in the analysis of survival data, implemented in PROC PHRED recently available in SAS/STAT. This technique has a number of major advantages including the ability to deal with censored failure times data and with the complication of time-dependant co-variables. The paper focus on the modelling and a presentation of the results given by SAS. They provide estimate of how the relative risk of degradation changes after peening and indicate for which values of the prognostic factors analyzed the treatment is likely to be most beneficial. (authors). 2 refs., 3 figs., 6 tabs

Mediation analysis allowing for exposure-mediator interactions and causal interpretation: theoretical assumptions and implementation with SAS and SPSS macros.

Science.gov (United States)

Valeri, Linda; Vanderweele, Tyler J

2013-06-01

Mediation analysis is a useful and widely employed approach to studies in the field of psychology and in the social and biomedical sciences. The contributions of this article are several-fold. First we seek to bring the developments in mediation analysis for nonlinear models within the counterfactual framework to the psychology audience in an accessible format and compare the sorts of inferences about mediation that are possible in the presence of exposure-mediator interaction when using a counterfactual versus the standard statistical approach. Second, the work by VanderWeele and Vansteelandt (2009, 2010) is extended here to allow for dichotomous mediators and count outcomes. Third, we provide SAS and SPSS macros to implement all of these mediation analysis techniques automatically, and we compare the types of inferences about mediation that are allowed by a variety of software macros. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

Hotell Radisson SAS = Radisson SAS Hotel / Inga Raukas

Index Scriptorium Estoniae

Raukas, Inga, 1967-

2001-01-01

Projekteerija Arhitektuuribüroo Künnapu & Padrik. Arhitektid Vilen Künnapu, Ain Padrik, Eero Palm, Tarmo Maiste. Sisekujundajad Christian Lundwall, Jan Öberg. Konstruktsioonid: Teuvo Meriläinen, Jyrki Rautamäki. Projekt ja hotell valmis 2000. 12 ill.: korruste plaanid, sise- ja välisvaated

Análisis financiero de la empresa Neoris Colombia S.A.S. y el sector de tecnologías de información en Colombia

OpenAIRE

Chaparro Rojas, Laura Cristina

2016-01-01

El siguiente trabajo de grado para la Facultad de Administración de la Universidad del Rosario, tiene como objetivo principal realizar un análisis financiero de la compañía NEORIS COLOMBIA S.A.S., empresa resultante de las soluciones innovadoras que creó CEMEX, uno de los productores de cemento más grandes y rentables del mundo, y que se dedica a brindar consultoría interna de tecnología. Asimismo, indagar las implicaciones que tienen los cambios y el avance en los sistemas de implementación ...

Regional homogeneity changes in patients with primary insomnia

Energy Technology Data Exchange (ETDEWEB)

Wang, Tianyue [Guangdong No. 2 Provincial People' s Hospital of Southern Medical University, The Third Clinical Medical College of Southern Medical University, Guangzhou (China); Li, Shumei; Jiang, Guihua; Lin, Chulan; Li, Meng; Ma, Xiaofen; Zhan, Wenfeng; Fang, Jin; Li, Liming; Li, Cheng; Tian, Junzhang [Guangdong No. 2 Provincial People' s Hospital of Southern Medical University, Guangzhou (China)

2016-05-15

The study aimed to explore the regional spontaneous activity changes in primary insomnia (PI) patients. Based on the resting-state fMRI datasets acquired from 59 PI patients and 47 healthy controls, a two-sample t-test was performed on individual normalized regional homogeneity (ReHo) maps. Relationships between abnormal ReHo values and the Pittsburgh Sleep Quality Index (PSQI), the self-rating anxiety scale (SAS) and the self-rating depression scale (SDS) were investigated with Pearson correlation analysis. In PI patients, we found increased ReHo in the left insula, right anterior cingulate gyrus, bilateral precentral gyrus and left cuneus, as well as decreased ReHo in the right middle cingulate cortex and left fusiform (p < 0.05, AlphaSim-corrected). We also found a significant positive correlation between increased ReHo in the left insula and SAS scores, decreased ReHo in the right middle cingulated cortex and SDS, SAS scores as well as a negative correlation between increased ReHo in the right precentral gyrus and SDS scores (p < 0.05). Our study found abnormal spontaneous activities in multiple brain regions, especially in emotion-related areas in PI patients. Alterative activities in these regions might contribute to an understanding the intrinsic functional architecture of insomnia and its clinical features. (orig.)

Regional homogeneity changes in patients with primary insomnia

International Nuclear Information System (INIS)

Wang, Tianyue; Li, Shumei; Jiang, Guihua; Lin, Chulan; Li, Meng; Ma, Xiaofen; Zhan, Wenfeng; Fang, Jin; Li, Liming; Li, Cheng; Tian, Junzhang

2016-01-01

The study aimed to explore the regional spontaneous activity changes in primary insomnia (PI) patients. Based on the resting-state fMRI datasets acquired from 59 PI patients and 47 healthy controls, a two-sample t-test was performed on individual normalized regional homogeneity (ReHo) maps. Relationships between abnormal ReHo values and the Pittsburgh Sleep Quality Index (PSQI), the self-rating anxiety scale (SAS) and the self-rating depression scale (SDS) were investigated with Pearson correlation analysis. In PI patients, we found increased ReHo in the left insula, right anterior cingulate gyrus, bilateral precentral gyrus and left cuneus, as well as decreased ReHo in the right middle cingulate cortex and left fusiform (p < 0.05, AlphaSim-corrected). We also found a significant positive correlation between increased ReHo in the left insula and SAS scores, decreased ReHo in the right middle cingulated cortex and SDS, SAS scores as well as a negative correlation between increased ReHo in the right precentral gyrus and SDS scores (p < 0.05). Our study found abnormal spontaneous activities in multiple brain regions, especially in emotion-related areas in PI patients. Alterative activities in these regions might contribute to an understanding the intrinsic functional architecture of insomnia and its clinical features. (orig.)

Modification of the SAS4A Safety Analysis Code for Integration with the ADAPT Discrete Dynamic Event Tree Framework.

Energy Technology Data Exchange (ETDEWEB)

Jankovsky, Zachary Kyle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Denman, Matthew R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

It is difficult to assess the consequences of a transient in a sodium-cooled fast reactor (SFR) using traditional probabilistic risk assessment (PRA) methods, as numerous safety-related sys- tems have passive characteristics. Often there is significant dependence on the value of con- tinuous stochastic parameters rather than binary success/failure determinations. One form of dynamic PRA uses a system simulator to represent the progression of a transient, tracking events through time in a discrete dynamic event tree (DDET). In order to function in a DDET environment, a simulator must have characteristics that make it amenable to changing physical parameters midway through the analysis. The SAS4A SFR system analysis code did not have these characteristics as received. This report describes the code modifications made to allow dynamic operation as well as the linking to a Sandia DDET driver code. A test case is briefly described to demonstrate the utility of the changes.

Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D

Science.gov (United States)

Frerichs, Heinke; Schmitz, Oliver; Covele, Brent; Guo, Houyang; Hill, David; Feng, Yuhe

2017-10-01

In the Small Angle Slot (SAS) divertor in DIII-D, the combination of misaligned slot structure and non-axisymmetric perturbations to the magnetic field causes the strike point to vary radially along the divertor slot and even leave it at some toroidal locations. This effect essentially introduces an opening in the divertor slot from where recycling neutrals can easily escape, and thereby degrade performance of the slot divertor. This effect has been approximated by a finite gap in the divertor baffle. Simulations with EMC3-EIRENE show that a toroidally localized loss of divertor closure can result in non-axisymmetric divertor densities and temperatures. This introduces a density window of 10-15% on top of the nominal threshold separatrix density during which a non-axisymmetric onset of local detachment occurs, initially leaving the gap and up to 60 deg beyond that still attached. Conversely, the impact of such toroidally localized divertor perturbations on the toroidal symmetry of midplane separatrix conditions is small. This work has been funded by the U.S. Department of Energy under Early Career Award Grant DE-SC0013911, and Grant DE-FC02-04ER54698.

Estudio de inteligencia de mercados para la importación de tubería de acero carbón para PSA Colombia S.A.S.

OpenAIRE

2012-01-01

Estudio de inteligencia de mercados para la importación de tuberia de acero carbon para PSA Colombia S.A.S, SCH 40 de 2" revisar la viabilidad de la compra local versus la compra en el exterior analizando tres proveedores Estados Unidos, China y Brasil. En el presente trabajo se estudian los mercados para la importación de tubería de Acero Carbón SCH40, se realiza el análisis de cada área del proceso de comercialización y se establece en términos técnicos, comerciales, financieros, logísticos...

Toward a Competitive Process Intensification: A New Generation of Heat Exchanger-Reactors Vers une intensification des procédés économiquement viable : une nouvelle génération de réacteur-échangeur de chaleur

Directory of Open Access Journals (Sweden)

Tochon P.

2010-10-01

Full Text Available Process Intensification (PI in chemical production is a major concern of chemical manufacturers. Among the numerous options to intensify a process, the transposition from a batch reactor to a continuous plug flow reactor is a good alternative when the selectivity and the thermal exchange are an issue. In this context, the RAPIC R&D project aims to develop an innovative low-cost component (in the 10 kg/h range. This project deals with the design from the local to the global scale and with testing, from elementary mock-ups to pilot scale. The present paper gives a detailed description of this research project and presents the main results on specification and definition of the reaction channel and the first simple mock-ups. L’intensification des procédés (IP constitue une des préoccupations majeures de l’industrie chimique. Parmi les nombreuses options possibles pour intensifier un procédé, lorsque le sujet concerne la sélectivité et l’échange thermique, la transposition d’un réacteur discontinu à un réacteur tubulaire continu paraît une bonne alternative. Dans ce contexte, le projet de R&D RAPIC consiste à développer un composant innovant à bas coût (environ 10 kg/heure. Ce projet porte sur la phase de conception, du niveau local au niveau global, et sur la phase de tests, depuis les maquettes élémentaires jusqu’aux essais pilote. Cet article propose une description détaillée de ce projet de recherche et présente les principaux résultats obtenus sur la définition et la spécification du canal de réaction, ainsi que les premières maquettes simples.

Le procédé de blanchiment dans les ateliers monétaires français au XV-XVIème siècle: approche archéométrique et expérimentale

Directory of Open Access Journals (Sweden)

Téreygeol, Florian

2011-12-01

Full Text Available In the late nineties, excavations in La Rochelle (France have discovered the remains of a royal mint of the sixteenth century. This discovery enabled the collection of artefacts directly related to the manufacture of coins. The exceptional corpus gathered is the subject of a study of the chaîne opératoire of coining in the medieval time. Special attention is paid to an operation which takes place before the strike: the blanching of blanks. Well documented in ancient times, the samples from La Rochelle offer the opportunity to study this process during the medieval period and in a royal mint. In addition, thanks to reconstitution experiments, it is possible to define a reaction mechanism that helps to understand our historical observations.[fr] À la fin des années quatre-vingtdix, des fouilles menées à La Rochelle (France ont permis de mettre au jour les vestiges d’un atelier monétaire royal du XVIe siècle. Cette découverte a permis la collecte de matériel directement liée à la fabrication monétaire. Le corpus exceptionnel rassemblé est l’objet d’une étude qui vise à mettre en évidence la chaîne opératoire de fabrication de monnaie à l’époque considérée. Un intérêt particulier est porté à une technique d’argenture qui intervient avant la frappe des monnaies, le blanchiment des flans. Bien documenté pour les périodes antiques, le matériel de La Rochelle offre la possibilité de mettre en évidence ce procédé pour une période plus récente et dans un cadre officiel. De plus, à partir d’expériences de reconstitution, il a été possible de proposer un mécanisme réactionnel. Les hypothèses proposées permettent alors de dégager des implications historiques dans le procédé de fabrication.

Can the Immune System Perform a t-Test?

Science.gov (United States)

Faria, Bruno Filipe; Mostardinha, Patricia

2017-01-01

The self-nonself discrimination hypothesis remains a landmark concept in immunology. It proposes that tolerance breaks down in the presence of nonself antigens. In strike contrast, in statistics, occurrence of nonself elements in a sample (i.e., outliers) is not obligatory to violate the null hypothesis. Very often, what is crucial is the combination of (self) elements in a sample. The two views on how to detect a change seem challengingly different and it could seem difficult to conceive how immunological cellular interactions could trigger responses with a precision comparable to some statistical tests. Here it is shown that frustrated cellular interactions reconcile the two views within a plausible immunological setting. It is proposed that the adaptive immune system can be promptly activated either when nonself ligands are detected or self-ligands occur in abnormal combinations. In particular we show that cellular populations behaving in this way could perform location statistical tests, with performances comparable to t or KS tests, or even more general data mining tests such as support vector machines or random forests. In more general terms, this work claims that plausible immunological models should provide accurate detection mechanisms for host protection and, furthermore, that investigation on mechanisms leading to improved detection in “in silico” models can help unveil how the real immune system works. PMID:28046042

Longitudinal Model Building Using Latent Transition Analysis: An Example Using School Bullying Data

Directory of Open Access Journals (Sweden)

Ji Hoon Ryoo

2018-05-01

Full Text Available Applications of latent transition analysis (LTA have emerged since the early 1990s, with numerous scientific findings being published in many areas, including social and behavioral sciences, education, and public health. Although LTA is effective as a statistical analytic tool for a person-centered model using longitudinal data, model building in LTA has often been subjective and confusing for applied researchers. To fill this gap in the literature, we review the components of LTA, recommend a framework of fitting LTA, and summarize what acceptable model evaluation tools should be used in practice. The proposed framework of fitting LTA consists of six steps depicted in Figure 1 from step 0 (exploring data to step 5 (fitting distal variables. We also illustrate the framework of fitting LTA with data on concerns about school bullying from a sample of 1,180 students ranging from 5th to 9th grade (mean age = 12.2 years, SD = 1.29 years at Time 1 over three semesters. We identified four groups of students with distinct patterns of bullying concerns, and found that their concerns about bullying decreased and narrowed to specific concerns about rumors, gossip, and social exclusion over time. The data and command (syntax files needed for reproducing the results using SAS PROC LCA and PROC LTA (Version 1.3.2 (2015 and Mplus 7.4 (Muthén and Muthén, 1998–2015 are provided as online supplementary materials.

Feeding management strategy for male broiler breeders and its effects on body weight, hatchability and fertility

Directory of Open Access Journals (Sweden)

MM Silveira

2014-12-01

Full Text Available The objective of the present study was to evaluate the supply of a specific-male diet on rooster body weight, hatchability, and fertility. Two diets were supplied during the egg production period: treatment 1, diet formulated for females and containing, in average, 2,830 kcal ME/kg and 15% CP; and treatment 2, diet specifically formulated for male broiler breeders, containing 2,750 kcal ME/kg and 13.5% CP. In the experiment, 26 flocks, with approximately 7,000 females and 840 males each, belonging to the same broiler breeder commercial strain, were distributed into 26 houses (1200m² on the same farm, and submitted to the same management practices. Body weight was evaluated in 13 flocks per treatment and for five weeks (45, 50, 55, 60, 65, and hatchability and fertility in four incubation lots per treatment and for the same weeks. Data were evaluated by the analysis of mixed models for repeated measurements, using the PROC MIXED of SAS 9.3 (SAS Institute Inc., Cary, NC, USA, and means were compared by the test of Tukey-Kramer at 5% significance level. The specific-male diet allowed body weight control during all analyzed weeks and promoted high hatchability and egg fertility. The increase in the number of chicks hatched demonstrates the economic viability of feeding a specific diet for male broiler breeders.

Relationships between dry matter content, ensiling, ammonia-nitrogen, and ruminal in vitro starch digestibility in high-moisture corn samples.

Science.gov (United States)

Ferraretto, L F; Taysom, K; Taysom, D M; Shaver, R D; Hoffman, P C

2014-05-01

The objectives of the study were (1) to determine relationships between high-moisture corn (HMC) dry matter (DM), ammonia-N [% of crude protein (CP)], and soluble CP concentrations, and pH, with 7-h ruminal in vitro starch digestibility (ivStarchD), and (2) to evaluate the effect of ensiling on pH, ammonia-N, soluble CP, and ivStarchD measurements in HMC. A data set comprising 6,131 HMC samples (55 to 80% DM) obtained from a commercial feed analysis laboratory was used for this study. Month of sample submittal was assumed to be associated with length of the ensiling period. Data for month of sample submittal were analyzed using Proc Mixed in SAS (SAS Institute Inc., Cary, NC) with month as a fixed effect. Regressions to determine linear and quadratic relationships between ivStarchD and ammonia-N, soluble CP, pH, and DM content were performed using Proc Mixed. The ivStarchD increased by 9 percentage units from October to August of the following year. Similar results were observed for ammonia-N and soluble CP with increases from 1.8 to 4.6% of CP and 31.3 to 46.4% of CP, respectively, from October to August of the following year. Ammonia-N was positively related to ivStarchD (R(2)=0.61). The DM content of HMC at silo removal was negatively related (R(2)=0.47) to ivStarchD with a decrease of 1.6 percentage units in ivStarchD per 1-percentage-unit increase in DM content. The pH of HMC was negatively related to ammonia-N (R(2)=0.53), soluble CP (R(2)=0.57), and ivStarchD (R(2)=0.51). Combined, ammonia-N, DM, soluble CP, and pH provided a good prediction of ivStarchD (adjusted R(2)=0.70). Increasing pH, ammonia-N, soluble CP, and ivStarchD values indicate that HMC may need up to 10 mo of ensiling to reach maximum starch digestibility. Ammonia-N, DM content, soluble CP concentration, and pH are good indicators of ruminal in vitro starch digestibility for high-moisture corn. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights

Phenotypic characterization of naturalized swine breeds in Brazil, Uruguay and Colombia

Directory of Open Access Journals (Sweden)

Concepta McManus

2010-06-01

Full Text Available Morphometric data was collected on 859 naturalized swine in Brazil (Piau, Tatu, Nilo, Caruncho, Casco de Burro, Moura, Monteiro and Rabo de Peixe, Colombia (Criolla Zungo, Sanpedreño and Casco de Mula and Uruguay (Mamellado, both on farm and in published material. Information was collected on breed, sex and age, as well as various morphometric measurements. Analysis of variance was carried out using PROC MIXED of SAS ® on phenotypic data. The coefficients of variance varied between 11.50 and 83.81%, and the coefficient of determination was medium to high. Females were in general smaller for most measurements than males, showing sexual dimorphism. The Moura was the closest naturalized breed to the commercial breeds, followed by the Piau, while the Monteiro was the furtherest. The dendrogram obtained from morphological information showed a division of the pigs into three groups. Characterization was possible using morphological and morphometric data.Foram colhidos dados morfométricos de 859 suínos naturalizados do Brasil (Piau, Tatu, Nilo, Caruncho, Casco de Burro, Moura, Monteiro e Rabo de Peixe, Colômbia (Criolla Zungo, Sanpedreño e Casco de Mula e Uruguai (Mamellado Dados sobre raça, sexo e idade foram coletados, assim como varias avaliações morfométricas. A análise de variância foi realizada utilizando-se o procedimento PROC GLM do SAS sobre os dados morfométricos. Os coeficientes de variância oscilaram de 11,50 a 83,81% e o coeficiente de determinação foi de moderado a alto. As fêmeas foram em geral menores na maioria das avaliações em relação aos machos, indicando dimorfismo sexual. A Moura foi a raça naturalizada mais próxima das raças comerciais, seguida da Piau, enquanto a Monteiro apresentou-se mais distante. O dendograma obtido a partir de informações morfológicas apresentou divisão dentro de três grupos. A caracterização foi possível utilizando-se dados morfológicos e morfométricos.

Risk of injury by driving with alcohol and other drugs

DEFF Research Database (Denmark)

Hels, Tove; Bernhoft, Inger Marie; Lyckegaard, Allan

2011-01-01

contributed to the study on the relative risk of getting seriously injured: Denmark, Finland, Lithuania, Italy, Belgium and the Netherlands. Four countries contributed to the study on the relative risk of getting killed: Finland, Norway, Sweden and Portugal. The risk for a driver of getting seriously injured...... or killed in an accident while positive for a given substance was calculated as the ratio between the odds for a driver of being seriously injured/killed in an accident while positive for a given substance and the odds of being seriously injured/killed while negative. The odds ratios were calculated...... by means of logistic regression using the SAS 9.2 procedure proc logistic. Data from the case study population consisted of samples from the hospital studies of seriously injured drivers and those of killed drivers (Isalberti et al., 2011). In total, 2,490 seriously injured drivers and 1,112 killed drivers...

Optimisation énergétique des procédés de séparation en raffinage et en traitement de gaz naturel Optimal Use of Energy in Separation Processes for Refining and Natural Gas Treatment

Directory of Open Access Journals (Sweden)

Rojey A.

2006-11-01

Full Text Available Cet article présente une méthode d'optimisation des procédés de séparation basée sur une analyse thermodynamique. Cette analyse s'appuie sur un bilan exergétique qui est établi dans le cas général d'un système quelconque opérant en régime permanent. Les facteurs qui conditionnent le rendement exergétique d'un procédé de séparation sont ensuite examinés. Il en résulte une méthode d'optimisation basée sur une réduction des irréversibilités thermodynamiques. Des exemples concrets d'application en raffinage et en traitement de gaz naturel sont présentés, et on montre comment cette analyse peut déboucher sur la conception de procédés innovants. The optimization of separation units in refining and natural-gas processing must take into consideration new needs and constraints that may seem incompatible. New installations must be designed not only on the basis of energy optimization but also by seeking to minimize investments and to respect new rules concerning environmental protection. The optimization described in this article is based on a thermodynamic analysis of different material and energy exchanges, The energybalance provides a suitable basis for making this analysis. It leads to the defining of an exergy efficiency that is all the higher as the thermodynamic irreversibilities are reduced, and that tends toward one for an ideal reversible system. For a separation process, a separation exergyterm is defined that correspond to the minimum separation work . Distillation is the basic separation operation. The exergy efficiency of this operation is low, and we show that, even in a relatively favorable cas, it is no greater than a value of about 6%. For an atmospheric distillation operation of crude oil, the exergy efficiency is about 4%. This overall exergy efficiency is the product of an external exergy efficiency and an internal exergy efficiency. The external exergy efficiency can be improved by better thermal

El procés d'integració de la primera biblioteca interuniversitària d'Espanya : la Biblioteca del campus universitari de Manresa

Directory of Open Access Journals (Sweden)

Riu Amblàs, Trini

2015-12-01

Full Text Available Fa deu anys, la biblioteca de l'Escola Politècnica Superior d'Enginyeria de Manresa de la Universitat Politècnica de Catalunya, la de la Fundació Universitària del Bages i la del Centre de Suport del Bages de la Universitat Oberta de Catalunya, s'integraven per formar una única biblioteca universitària: la Biblioteca del campus universitari de Manresa. Amb l'objectiu de descriure aquest procés d'integració, s'introdueix què són les biblioteques integrades, se n'enumeren els beneficis i se'n presenten els diferents models. A continuació, partint de l'experiència, es defineixen les actuacions dutes a terme per aconseguir la integració total d'usuaris, recursos i serveis, i es descriu l'estructura i organització creades per integrar de manera eficient les biblioteques existents en una de nova. Així, s'analitza el context i es descriu la gestió duta a terme en cada una de les fases del procés, des de la planificació i definició del projecte fins a la integració total del personal, els serveis, el fons i el catàleg. Finalment, es posen de manifest les aportacions de l'experiència d'integrar-se i treballar conjuntament durant deu anys.Hace diez años, la biblioteca de la Escola Politècnica Superior d'Enginyeria de Manresa de la Universitat Politècnica de Catalunya, la de la Fundació Universitària del Bages y la del Centre de Suport del Bages de la Universitat Oberta de Catalunya se integraban para formar una única biblioteca universitaria: la Biblioteca del campus universitario de Manresa. Con el objetivo de describir este proceso de integración, se introduce qué son las bibliotecas integradas, se enumeran sus beneficios y se presentan sus diferentes modelos. A continuación, partiendo de la experiencia, se definen las actuaciones llevadas a cabo para conseguir la integración total de usuarios, recursos y servicios, y se describe la estructura y organización creadas para integrar de manera eficiente las bibliotecas

VnpProcServiceV2

Data.gov (United States)

Department of Veterans Affairs — Common web service for VONAPP Finds all the vnp process information, find vnp process information by primary key, create vnp process information, update vnp process...

Evaluación de la gestión de residuos derivados del proceso de impresión en Datapoint de Colombia S.A.S, y propuesta de mejora

OpenAIRE

Fino Gallego, Sandra Patricia; Gómez Gianine, Carol Ruchina; Ruano Reyes, Sandra Milena

2015-01-01

Este trabajo se centra en el análisis de las actividades desarrolladas en torno a los servicios de procesos de impresión que ofrece la organización DATAPOINT de Colombia SAS para identificar los puntos críticos en la gestión de los residuos de impresión y las decisiones tomadas por parte de los involucrados durante todo el proceso (proveedores, clientes y la empresa), con el fin de revisar medidas y estrategias que permitan fortalecer la gestión integral de residuos de impresión a partir d...

La production des oléfines. Etat de la technique et développement dans le domaine des réacteurs chimiques et des procédés Olefin Production. State of Technology and Developement in the Field of Chemical Reactors and Processes

Directory of Open Access Journals (Sweden)

Amouyal R.

2006-11-01

Full Text Available La production des oléfines légères : éthylène, propylène et butadiène est actuellement entièrement basée sur le vapocraquage d'hydrocarbures dans des fours tubulaires. L'industrie doit faire face à un problème de coûts de production croissants, en grande partie dû au renchérissement des hydrocarbures et de l'énergie. D'autres procédés que le vapocraquage ont été proposés pour favoriser la diversification sur le plan des matières premières ; certains ont même été exploités industriellement. Le présent article fait le point sur l'état des développements en cours concernant plus particulièrement les procédés suivants : - craquage autothermique ; - craquage par caloporteur solide ; - craquage cyclique ; - craquage catalytique ; - prétraitement de charges lourdes ; - oléfines à partir de gaz de synthèse ; - oléfines à partir de biomasse. The production of light olefins (ethylene, propylene and butadien is now based entirely on hydrocarbon steam cracking in pipe stills. The industry must face the problem of increasing production costs, largely due to the higher costs of hydrocarbons and energy. Processes other than steam cracking have been proposed to promote diversification with regard to raw materials, and some such processes have even operated industrially. This article sums up the state of ongoing developments concerning in particular the following processes: a autothermal cracking; b cracking by a solid heat carrier; c cyclic cracking; d catalytic cracking ; e preprocessing of heavy feeds; f olefins from synthetic gas; g olefins from biomass.

Aplicación de la GTC-34 y GTC-45 en una S.A.S de servicios en HSEQ: Estudio de caso

Directory of Open Access Journals (Sweden)

Olga Lucia Díaz Villamizar

2013-07-01

Full Text Available The goal of the project was the development of the Occupational Health Program and Risk Factor Outlook based on the Colombian Technical Standards GTC 34 and 45, for a SAS company working on HSEQ solutions. The outlook and the program were based on a diagnosis obtained through a survey filled out by the Manager and by checking the occupational health progress status through a “checklist”. With this information, a risk matrix was applied to each process, which complemented the Occupational Health Program design. Finally, the results of the project were socialized with all employees, and it is expected to be the starting point for the enterprise to build a culture of pre­vention and self-care. The implementation of the Occupational Health Program allows the studied company to comply with the Colombian law in Occupational Health, get the RUC, bid in the public and private sector, and initiate a process of S& S - OHSAS 18001: 07 standards certification.

Cross calibration of IRS-P4 OCM satellite sensor

Digital Repository Service at National Institute of Oceanography (India)

Suresh, T.; Desa, E.; Mascarenhas, A.A.M.Q.; Matondkar, S.G.P.; Naik, P.; Nayak, S.R.

Vol. 6404 640414-2 Proc. of SPIE Vol. 6404 640414-3 Proc. of SPIE Vol. 6404 640414-4 S. ..t . . Proc. of SPIE Vol. 6404 640414-5 Proc. of SPIE Vol. 6404 640414-6 0,E 0,E VC) I-a C C) C) Cu Cl) 1.0 0.8 0.6 0.2 0.0 0.0 0.6 Measured (mg/rn3) Proc...

Atmospheric mold spore counts in relation to meteorological parameters

Science.gov (United States)

Katial, R. K.; Zhang, Yiming; Jones, Richard H.; Dyer, Philip D.

Fungal spore counts of Cladosporium, Alternaria, and Epicoccum were studied during 8 years in Denver, Colorado. Fungal spore counts were obtained daily during the pollinating season by a Rotorod sampler. Weather data were obtained from the National Climatic Data Center. Daily averages of temperature, relative humidity, daily precipitation, barometric pressure, and wind speed were studied. A time series analysis was performed on the data to mathematically model the spore counts in relation to weather parameters. Using SAS PROC ARIMA software, a regression analysis was performed, regressing the spore counts on the weather variables assuming an autoregressive moving average (ARMA) error structure. Cladosporium was found to be positively correlated (Pmodel was derived for Cladosporium spore counts using the annual seasonal cycle and significant weather variables. The model for Alternaria and Epicoccum incorporated the annual seasonal cycle. Fungal spore counts can be modeled by time series analysis and related to meteorological parameters controlling for seasonallity; this modeling can provide estimates of exposure to fungal aeroallergens.

Estudio logístico en la empresa COMERFRUTAS de Colombia S.A.S para la exportación de pulpa de limón al mercado holandés

OpenAIRE

Piedrahita Bravo, Carlos Hernán; Marín Ríos, Esteban

2012-01-01

El presente documento ofrece una guía logística y análisis financiero para las pequeñas y medianas empresas (PyMES) de Colombia que deseen exportar pulpa de limón al mercado Europeo. Para el desarrollo de este trabajo se ha tomado el caso de la micro empresa COMERFRUTAS de Colombia S.A.S. (productora de pulpa de limón) y se ha realizado un estudio de competitividad de puertos, agentes de carga tanto terrestre como marítimos para dar las bases necesarias de exportación a las PyMES colombianas ...

How to Deal with Interval-Censored Data Practically while Assessing the Progression-Free Survival: A Step-by-Step Guide Using SAS and R Software.

Science.gov (United States)

Dugué, Audrey Emmanuelle; Pulido, Marina; Chabaud, Sylvie; Belin, Lisa; Gal, Jocelyn

2016-12-01

We describe how to estimate progression-free survival while dealing with interval-censored data in the setting of clinical trials in oncology. Three procedures with SAS and R statistical software are described: one allowing for a nonparametric maximum likelihood estimation of the survival curve using the EM-ICM (Expectation and Maximization-Iterative Convex Minorant) algorithm as described by Wellner and Zhan in 1997; a sensitivity analysis procedure in which the progression time is assigned (i) at the midpoint, (ii) at the upper limit (reflecting the standard analysis when the progression time is assigned at the first radiologic exam showing progressive disease), or (iii) at the lower limit of the censoring interval; and finally, two multiple imputations are described considering a uniform or the nonparametric maximum likelihood estimation (NPMLE) distribution. Clin Cancer Res; 22(23); 5629-35. ©2016 AACR. ©2016 American Association for Cancer Research.

Crescimento de genótipos de frangos tipo caipira

Directory of Open Access Journals (Sweden)

R. C. Veloso

2015-10-01

Full Text Available RESUMOObjetivou-se com este trabalho comparar o padrão de crescimento, mediante ajustes das respectivas curvas de crescimento por modelos não lineares, bem como estudar o desenvolvimento de cortes de carcaça em relação ao peso da carcaça em diferentes genótipos de frangos tipo caipira. Foram utilizados 840 pintos de um dia, machos, distribuídos em delineamento inteiramente ao acaso, dos seguintes genótipos da linhagem Redbro: Caboclo, Carijó, Colorpak, Gigante Negro, Pesadão Vermelho, Pescoço Pelado e Tricolor. As aves foram alojadas em 28 boxes, sendo 30 aves/boxe, em galpão de alvenaria com acesso a um piquete de 45m², com quatro repetições. O peso corporal individual dos frangos foi medido ao nascer, aos 14, 28, 42, 56, 70 e 84 dias de idade. Para a determinação das curvas de crescimento do peso corporal das aves, os dados coletados foram avaliados por meio dos modelos não lineares: Brody, Gompertz, Logístico, Richards e von Bertalanffy. Foi empregado o PROC NLIN do SAS, utilizando-se o método interativo de Gauss-Newton. Os critérios usados para escolha do modelo de melhor ajuste da curva de crescimento foram o coeficiente de determinação, o desvio padrão assintótico, o desvio médio absoluto dos resíduos e o índice assintótico. As análises para obtenção dos coeficientes alométricos foram realizadas por meio do PROC GLM do SAS para os genótipos Carijó, Colorpak, Pesadão Vermelho, Pescoço Pelado e Tricolor. Foram avaliados os pesos da carcaça, do peito, das coxas, das sobrecoxas, das pernas e das asas das aves abatidas aos 85 dias de idade. Apenas as equações propostas por Gompertz, von Bertalanffy e Logístico atingiram a convergência, e o modelo proposto por von Bertalanffy foi o mais adequado para descrever o crescimento dos genótipos de frangos caipiras. Todos os cortes avaliados apresentaram crescimento tardio em relação ao peso da carcaça em genótipos de frangos tipo caipira.

A Case Study: Business Process Reengineering at Raymond W. Bliss Army Community Hospital

Science.gov (United States)

1997-05-01

Among the causes listed are: • Inadequate Management of Resistance • Attempting Painless Reengineering • Lack of Understanding About Reengineering...Parathyroid Proc. 0.9554 $5,458 1 0.9554 $5,458 SD 290 Thyroid Proc 0.9362 $5,349 3 2.8086 $16,046 SD 291 Thyroglossal Proc 0.4657 $2,661 2 0.9314 $5,321...Tissues Breast Age 0-17 0.6146 $2,799 SD 284 Minor skin disord. w/o CC 0.4042 $1,841 SD 289 Parathyroid Proc. 0.9554 $4,351 SD 290 Thyroid Proc

Highest cited papers published in Neurology India: An analysis for the years 1993-2014.

Science.gov (United States)

Pandey, Paritosh; Subeikshanan, V; Madhugiri, Venkatesh S

2016-01-01

The highest cited papers published in a journal provide a snapshot of the clinical practice and research in that specialty and/or region. The aim of this study was to determine the highest cited papers published in Neurology India and analyze their attributes. This study was a citation analysis of all papers published in Neurology India since online archiving commenced in 1993. All papers published in Neurology India between the years 1993-2014 were listed. The number of times each paper had been cited up till the time of performing this study was determined by performing a Google Scholar search. Published papers were then ranked on the basis of total times cited since publication and the annual citation rate. Statistical Techniques: Simple counts and percentages were used to report most results. The mean citations received by papers in various categories were compared using the Student's t-test or a one-way analysis of variance, as appropriate. All analyses were carried out on SAS University Edition (SAS/STAT®, SAS Institute Inc, NC, USA) and graphs were generated on MS Excel 2016. The top papers on the total citations and annual citation rate rank lists pertained to basic neuroscience research. The highest cited paper overall had received 139 citations. About a quarter of the papers published had never been cited at all. The major themes represented were vascular diseases and infections. The highest cited papers reflect the diseases that are of major concern in India. Certain domains such as trauma, allied neurosciences, and basic neuroscience research were underrepresented.

Ratio of dietary rumen degradable protein to rumen undegradable protein affects nitrogen partitioning but does not affect the bovine milk proteome produced by mid-lactation Holstein dairy cows.

Science.gov (United States)

Tacoma, R; Fields, J; Ebenstein, D B; Lam, Y-W; Greenwood, S L

2017-09-01

Little is known about the bovine milk proteome or whether it can be affected by diet. The objective of this study was to determine if the dietary rumen degradable protein (RDP):rumen undegradable protein (RUP) ratio could alter the bovine milk proteome. Six Holstein cows (parity: 2.5 ± 0.8) in mid lactation were blocked by days in milk (80 ± 43 d in milk) and milk yield (57.5 ± 6.0 kg) and randomly assigned to treatment groups. The experiment was conducted as a double-crossover design consisting of three 21-d periods. Within each period, treatment groups received diets with either (1) a high RDP:RUP ratio (RDP treatment: 62.4:37.6% of crude protein) or (2) a low RDP:RUP ratio (RUP treatment: 51.3:48.7% of crude protein). Both diets were isonitrogenous and isoenergetic (crude protein: 18.5%, net energy for lactation: 1.8 Mcal/kg of dry matter). To confirm N and energy status of cows, dry matter intake was determined daily, rumen fluid samples were collected for volatile fatty acid analysis, blood samples were collected for plasma glucose, β-hydroxybutyrate, urea nitrogen, and fatty acid analysis, and total 24-h urine and fecal samples were collected for N analysis. Milk samples were collected to determine the general milk composition and the protein profile. Milk samples collected for high-abundance protein analysis were subjected to HPLC analysis to determine the content of α-casein, β-casein, and κ-casein, as well as α-lactalbumin and β-lactoglobulin. Samples collected for low-abundance protein analysis were fractionated, enriched using ProteoMiner treatment, and separated using sodium dodecyl sulfate-PAGE. After excision and digestion, the peptides were analyzed using liquid chromatography (LC) tandem mass spectrometry (MS/MS). The LC-MS/MS data were analyzed using PROC GLIMMIX of SAS (version 9.4, SAS Institute Inc., Cary, NC) and adjusted using the MULTTEST procedure. All other parameters were analyzed using PROC MIXED of SAS. No treatment differences

Bayesian logistic regression in detection of gene-steroid interaction for cancer at PDLIM5 locus.

Science.gov (United States)

Wang, Ke-Sheng; Owusu, Daniel; Pan, Yue; Xie, Changchun

2016-06-01

The PDZ and LIM domain 5 (PDLIM5) gene may play a role in cancer, bipolar disorder, major depression, alcohol dependence and schizophrenia; however, little is known about the interaction effect of steroid and PDLIM5 gene on cancer. This study examined 47 single-nucleotide polymorphisms (SNPs) within the PDLIM5 gene in the Marshfield sample with 716 cancer patients (any diagnosed cancer, excluding minor skin cancer) and 2848 noncancer controls. Multiple logistic regression model in PLINK software was used to examine the association of each SNP with cancer. Bayesian logistic regression in PROC GENMOD in SAS statistical software, ver. 9.4 was used to detect gene- steroid interactions influencing cancer. Single marker analysis using PLINK identified 12 SNPs associated with cancer (Plogistic regression in PROC GENMOD showed that both rs6532496 and rs951613 revealed strong gene-steroid interaction effects (OR=2.18, 95% CI=1.31-3.63 with P = 2.9 × 10⁻³ for rs6532496 and OR=2.07, 95% CI=1.24-3.45 with P = 5.43 × 10⁻³ for rs951613, respectively). Results from Bayesian logistic regression showed stronger interaction effects (OR=2.26, 95% CI=1.2-3.38 for rs6532496 and OR=2.14, 95% CI=1.14-3.2 for rs951613, respectively). All the 12 SNPs associated with cancer revealed significant gene-steroid interaction effects (P logistic regression and OR=2.59, 95% CI=1.4-3.97 from Bayesian logistic regression; respectively). This study provides evidence of common genetic variants within the PDLIM5 gene and interactions between PLDIM5 gene polymorphisms and steroid use influencing cancer.

Statistical models for thermal ageing of steel materials in nuclear power plants

International Nuclear Information System (INIS)

Persoz, M.

1996-01-01

Some category of steel materials in nuclear power plants may be subjected to thermal ageing, whose extent depends on the steel chemical composition and the ageing parameters, i.e. temperature and duration. This ageing affects the 'impact strength' of the materials, which is a mechanical property. In order to assess the residual lifetime of these components, a probabilistic study has been launched, which takes into account the scatter over the input parameters of the mechanical model. Predictive formulae for estimating the impact strength of aged materials are important input data of the model. A data base has been created with impact strength results obtained from an ageing program in laboratory and statistical treatments have been undertaken. Two kinds of model have been developed, with non linear regression methods (PROC NLIN, available in SAS/STAT). The first one, using a hyperbolic tangent function, is partly based on physical considerations, and the second one, of an exponential type, is purely statistically built. The difficulties consist in selecting the significant parameters and attributing initial values to the coefficients, which is a requirement of the NLIN procedure. This global statistical analysis has led to general models that are unction of the chemical variables and the ageing parameters. These models are as precise (if not more) as local models that had been developed earlier for some specific values of ageing temperature and ageing duration. This paper describes the data and the methodology used to build the models and analyses the results given by the SAS system. (author)

[The relationship between Ridit analysis and rank sum test for one-way ordinal contingency table in medical research].

Science.gov (United States)

Wang, Ling; Xia, Jie-lai; Yu, Li-li; Li, Chan-juan; Wang, Su-zhen

2008-06-01

To explore several numerical methods of ordinal variable in one-way ordinal contingency table and their interrelationship, and to compare corresponding statistical analysis methods such as Ridit analysis and rank sum test. Formula deduction was based on five simplified grading approaches including rank_r(i), ridit_r(i), ridit_r(ci), ridit_r(mi), and table scores. Practical data set was verified by SAS8.2 in clinical practice (to test the effect of Shiwei solution in treatment for chronic tracheitis). Because of the linear relationship of rank_r(i) = N ridit_r(i) + 1/2 = N ridit_r(ci) = (N + 1) ridit_r(mi), the exact chi2 values in Ridit analysis based on ridit_r(i), ridit_r(ci), and ridit_r(mi), were completely the same, and they were equivalent to the Kruskal-Wallis H test. Traditional Ridit analysis was based on ridit_r(i), and its corresponding chi2 value calculated with an approximate variance (1/12) was conservative. The exact chi2 test of Ridit analysis should be used when comparing multiple groups in the clinical researches because of its special merits such as distribution of mean ridit value on (0,1) and clear graph expression. The exact chi2 test of Ridit analysis can be output directly by proc freq of SAS8.2 with ridit and modridit option (SCORES =). The exact chi2 test of Ridit analysis is equivalent to the Kruskal-Wallis H test, and should be used when comparing multiple groups in the clinical researches.

Evaluation of the performance characteristics of bilayer tablets: Part II. Impact of environmental conditions on the strength of bilayer tablets.

Science.gov (United States)

Kottala, Niranjan; Abebe, Admassu; Sprockel, Omar; Bergum, James; Nikfar, Faranak; Cuitiño, Alberto M

2012-12-01

Ambient air humidity and temperature are known to influence the mechanical strength of tablets. The objective of this work is to understand the influence of processing parameters and environmental conditions (humidity and temperature) on the strength of bilayer tablets. As part of this study, bilayer tablets were compressed with different layer ratios, dwell times, layer sequences, material properties (plastic and brittle), first and second layer forces, and lubricant concentrations. Compressed tablets were stored in stability chambers controlled at predetermined conditions (40C/45%RH, 40C/75%RH) for 1, 3, and 5 days. The axial strength of the stored tablets was measured and a statistical model was developed to determine the effects of the aforementioned factors on the strength of bilayer tablets. As part of this endeavor, a full 3 × 2(4) factorial design was executed. Responses of the experiments were analyzed using PROC GLM of SAS (SAS Institute Inc, Cary, North Carolina, USA). A model was fit using all the responses to determine the significant interactions (p < 0.05). Results of this study indicated that storage conditions and storage time have significant impact on the strength of bilayer tablets. For Avicel-lactose and lactose-Avicel tablets, tablet strength decreased with the increasing humidity and storage time. But for lactose-lactose tablets, due to the formation of solid bridges upon storage, an increase in tablet strength was observed. Significant interactions were observed between processing parameters and storage conditions on the strength of bilayer tablets.

Sur la filabilité d'une laine teinte en bac-ouvert et d'une laine teinte à la continue

NARCIS (Netherlands)

Werker, W.; Mulder, D.; Stomph, J.; Schartman, A.F.

1966-01-01

Afin de constater, si la teinture selon le procédé à la continue ou selon le procédé en bac-ouvert influence les résultats dans Ia filature, on a teint deux lots homogènes à 18OO kg par lot en quatre parties: 450 kg, procédé à la continue, teints en rouge, 450 kg, procédé bac-ouvert, teints en

Smoking patterns, depression, and sociodemographic variables among Flemish women during pregnancy and the postpartum period.

Science.gov (United States)

De Wilde, Katrien S; Trommelmans, Leen C; Laevens, Hans H; Maes, Lea R; Temmerman, Marleen; Boudrez, Hedwig L

2013-01-01

Relationships among feelings of depression, smoking behavior, and educational level during pregnancy have been documented. Feelings of depression may contribute to persistent smoking during pregnancy. No longitudinal studies assessing feelings of depression in women with different antepartum and postpartum smoking patterns are available. The aim was to determine relationships between depressive symptoms, sociodemographic characteristics, and smoking pattern during and after pregnancy. An observational, prospective, noninterventional study was conducted. Data were collected during two stages of pregnancy (T0: postpartum (T2: >6 weeks) in 523 Flemish women. Feelings of depression (measured using the Beck Depression Inventory [BDI]), smoking behavior, and sociodemographic variables were analyzed using a general linear mixed model implemented in SAS Proc MIXED. Smokers and initial smokers reported significantly more depressive symptoms at all time points compared with recent ex-smokers, nonsmokers, and initial nonsmokers (p postpartum. Smoking patterns were associated with depression and showed complex interactions with educational level. Assessment and intervention for both smoking and depression are needed throughout the perinatal period to support the health of mothers, their infants, and families.

Porovnání statistických programových systémů SPSS, STATISTICA a SAS z hlediska jejich možností při analýze kategoriálních dat

OpenAIRE

Torboněnko, Natalja

2009-01-01

The purpose of this bachelor thesis is to compare three statistical software packages when applied to analysis of categorical data. These packages are SPSS, STATISTICA , and SAS Enterprise Guide. They provide a wide variety of statistical and graphical techniques, and enable users to obtain the results of statistical procedures, without requiring programming. The comparison between these packages were based upon some features such as data input, capability to define missing values, value labe...

La « Nouvelle Mosquée » d’Alger. Le déroulement d’une procédure constructive au xviie siècle

Directory of Open Access Journals (Sweden)

Samia Chergui

2012-01-01

Full Text Available « La Nouvelle Mosquée » est érigée, à la fin du xviie siècle, dans la seule perspective de doter le rite hanéfite de sa propre Grande Mosquée. Cette nouvelle édification relève, à l’évidence, d’une procédure collective exceptionnelle, celle qu’entreprend la milice d’Alger, en l’occurrence le corps des janissaires, en puisant dans les fonds des Subul al-Khayrât. L’examen du livre de comptes qu’avait tenu cette institution ḥabûs, responsable de la gestion de la plupart des mosquées hanéfites et de leurs awqâf, aussitôt après le lancement du chantier, a permis de suivre le déroulement des travaux sur une période de presque dix années, soit de 1067/1656-1657 à 1076/1665-1666. Ce rôle de chantier apporte des éclairages significatifs notamment sur la nature, la provenance, la quantité et le coût des matériaux employés à la construction. Ils ne manquent pas non plus de documenter les aspects concernant leur fabrication, voire leur préparation, et quelque rares fois leur mise en œuvre ; une mise en œuvre qui, ici, revient à la dextérité de nombreux hommes, mobilisés dans le cadre corporatif. La comptabilité salariale, tenue en cette occasion, compte d’ailleurs parmi les rares initiatives de gestion qui ont permis, durant au moins une décennie, de consigner les plus amples détails non seulement sur le profil distinctif de l’ensemble de ces intervenants, mais également sur leur origine géographique, voire confessionnelle.

An analysis of the number of parking bays and checkout counters for a supermarket using SAS simulation studio

Science.gov (United States)

Kar, Leow Soo

2014-07-01

Two important factors that influence customer satisfaction in large supermarkets or hypermarkets are adequate parking facilities and short waiting times at the checkout counters. This paper describes the simulation analysis of a large supermarket to determine the optimal levels of these two factors. SAS Simulation Studio is used to model a large supermarket in a shopping mall with car park facility. In order to make the simulation model more realistic, a number of complexities are introduced into the model. For example, arrival patterns of customers vary with the time of the day (morning, afternoon and evening) and with the day of the week (weekdays or weekends), the transport mode of arriving customers (by car or other means), the mode of payment (cash or credit card), customer shopping pattern (leisurely, normal, exact) or choice of checkout counters (normal or express). In this study, we focus on 2 important components of the simulation model, namely the parking area, the normal and express checkout counters. The parking area is modeled using a Resource Pool block where one resource unit represents one parking bay. A customer arriving by car seizes a unit of the resource from the Pool block (parks car) and only releases it when he exits the system. Cars arriving when the Resource Pool is empty (no more parking bays) leave without entering the system. The normal and express checkouts are represented by Server blocks with appropriate service time distributions. As a case study, a supermarket in a shopping mall with a limited number of parking bays in Bangsar was chosen for this research. Empirical data on arrival patterns, arrival modes, payment modes, shopping patterns, service times of the checkout counters were collected and analyzed to validate the model. Sensitivity analysis was also performed with different simulation scenarios to identify the parameters for the optimal number the parking spaces and checkout counters.

Laborsalud S.A.S.

OpenAIRE

2013-01-01

Crear una empresa prestadora de servicios integrales en salud ocupacional basados en la legislación vigente y enfocada a la satisfacción de las necesidades de los clientes, que brinde un valor agregado como expertos con un sistema de resultados en línea a través de su página web y amplio portafolio que integre los requerimientos en materia de salud ocupacional y seguridad industrial de las empresas.

Course of Untreated High Blood Pressure in the Emergency Department

Directory of Open Access Journals (Sweden)

Daniel J Feaster

2011-05-01

Full Text Available Introduction: No clear understanding exists about the course of a patient’s blood pressure (BP during an emergency department (ED visit. Prior investigations have demonstrated that BP can be reduced by removing patients from treatment areas or by placing patients supine and observing them for several hours. However, modern EDs are chaotic and noisy places where patients and their families wait for long periods in an unfamiliar environment. We sought to determine the stability of repeated BP measurements in the ED environment. Methods: A prospective study was performed at an urban ED. Research assistants trained and certified in BP measurement obtained sequential manual BPs and heart rates on a convenience sample of 76 patients, beginning with the patient arrival in the ED. Patients were observed through their stay for up to 2 hours, and BP was measured at 10-minute intervals. Data analysis with SAS PROC MIXED (SAS Institute, Cary, North Carolina for regression models with correlated data determined the shape of the curve as BP changed over time. Patients were grouped on the basis of their presenting BP as normal (less than 140/90, elevated (140–160/90–100, or severely elevated (greater than 160/100 for the regression analysis. Results: A statistically significant downward trend in systolic and diastolic BP was observed only for those patients presenting with severely elevated BPs (ie, greater than 160/100. Conclusion: We demonstrate a statistically significant decline in systolic and diastolic BP over time spent in the ED only for patients with severely elevated presenting BPs. [West J Emerg Med. 2011;12(4:421–425.

Modelo para la definición e implementación de procesos de gobierno de tecnologías de la información aplicado a CENIT Transporte y Logística de Hidrocarburos S.A.S.

OpenAIRE

Páez Ruiz, Andrea Paola; Vivas Hernández, Fredy

2016-01-01

El crecimiento que ha venido presentando CENIT Transporte y logística de hidrocarburos S.A.S. ha conducido a su área de tecnología a revisar los procesos tecnológicos con los que apoya a todas las áreas de negocio para el logro de la estrategia empresarial. Para poder cumplir con esta promesa de valor hacia la organización, el área de tecnología bajo un marco de trabajo reconocido debe analizar, definir, estructurar e implementar formalmente sus procesos y de esta manera también cumplirá con ...

Effect of the presence of two commercial adsorbents in animal feed on Aflatoxin B1 determination by ELISA kit test

Directory of Open Access Journals (Sweden)

Francesco Masoero

2010-01-01

Full Text Available A rapid AFB1 detection method by ELISA kit test was used on feedstuff samples, and compared to an HPLC method, to verify if the presence of clay-adsorbent (SA could cause erroneous quantification of the toxin. Samples were obtained using two AFB1-contaminated feedstuffs (7.92 and 17.58 µg/kg for low and high contaminated feeds; LC and HC respectively, added either one of two commercial SAs (Atox® and Myco AD and three different inclusion doses (0, 10 and 20 g/kg, respectively for CTR, 1% and 2% doses. The HPLC and ELISA data were compared in CTR samples with a paired t-test. The AFB1 recoveries, performed with ELISA, were analysed as a completely randomized design using a 2×2×3 factorial arrangement. The ELISA method tended to underestimate the AFB1 concentrations with respect to the HPLC method, both in HC (P=0.050 and in LC (P<0.001 feedstuffs. A more drastic reduction (P<0.001 was observed when SAs were included in the two feedstuffs. In particular, Atox® determined an AFB1 recovery of 15,5% in HC and 7,6% in LC (1% dose and of 11,1% in HC and 8,4% in LC (2% dose. Less severe penalisation were observed when Myco AD was added to feeds.

Scafom International BV v. Lorraine Tubes S.A.S.: a case review of changing circumstances under the United Nations Convention on International Sale of Goods (CISG of 1980

Directory of Open Access Journals (Sweden)

Amalina AHMAD TAJUDIN

2014-12-01

Full Text Available This paper analyses the Belgium Supreme Court decision of Scafom International BV v. Lorraine Tubes S.A.S. The case involved a contract of sale of volatile goods ie steel tubes whereby a fixed-price contract caused it to be unenforceable because of the 70% market price increase just before the goods were delivered to the buyer. While the seller requested for renegotiation, for a higher contract price, the buyer refused to come to terms with the former. The court, by virtue of the United Nations sales law, held that renegotiation was the appropriate remedy in such a situation. In addition, the paper tests the different possible outcomes of this decision under the English Sale of Goods Act 1979, as well as the US Uniform Commercial Code. The finding of this test proves that these two sales laws would have tackled the issue of volatile market differently from that of the United Nations’.

Interprofessional education: Partnerships in the educational proc.

Science.gov (United States)

Bressler, Toby; Persico, Lori

2016-01-01

The curriculum for healthcare professionals is primarily dictated by the demands of the specific discipline. Detailed curricula are essential to develop professional healthcare providers such as nurses, physicians and pharmacists. Traditional educational methods created a system or process where professionals operate in isolation from each other. A siloed structure inhibits effective communication, patient-centered care and safety. Today the focus in healthcare has shifted towards a more patient-centeredness approach using interprofessional collaboration to achieve optimal patient outcomes. Nurses are at the forefront of patient care and play a key role in quality patient care and improved patient outcomes. Interprofessional education is one type of academic strategy that nursing educators can incorporate into educational curricula. Copyright © 2015 Elsevier Ltd. All rights reserved.

La notion de temporalité au cœur de l’analyse des discours représentés à l’oral : essai de typologie, procédés rhétoriques et portées argumentatives des DR dans le débat présidentiel français de 2007

Directory of Open Access Journals (Sweden)

Caillat Domitille

2012-07-01

Full Text Available Dans le cadre d’un débat, la représentation de propos peut être considérée comme une véritable « arme » rhétorique, tant le recours à ce procédé permet au locuteur de jouer de différentes retombées argumentatives. Aussi, à partir de la transcription de la rencontre entre Nicolas Sarkozy (NS et Ségolène Royal (SR lors du débat présidentiel de l’entre-deux tours de 2007, nous proposons-nous d’étudier les différentes formes de DR utilisées afin d’en dresser une typologie à visée argumentative. Pour ce faire, nous nous placerons dans une optique quelque peu divergente des classifications traditionnelles, puisque nous utiliserons la notion de « temporalité » — en tant que positionnement de l’énonciation de référence par rapport à l’intervention en cours — comme principal critère distinctif des occurrences et des effets dont celles-ci sont directement responsables. En plaçant de la sorte la temporalité au centre de l’étude des discours représentés (dorénavant DR, nous serons tout d’abord amenée à reconsidérer les critères traditionnellement pris en compte dans les classifications temporelles, avant de revenir sur l’importance de la nature des sources énonciatives de référence ; nous reviendrons en outre sur le critère de « virtualité » fréquemment utilisé comme un élément distinctif. Nous procéderons alors, dans le but d’expliquer au mieux la portée de chaque occurrence de DR, à un inventaire des diverses formes recensées, en conduisant pour chaque type de source énonciative une étude des différentes temporalités observables.

The effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis

Energy Technology Data Exchange (ETDEWEB)

Lee, Y M; Sohng, K Y [Kangwon Tourism College, Kangwon-Do (Republic of Korea). Department of Nursing

2005-12-15

The purpose of this study was to determine the effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis. This study was a quasi-experimental study of pre-test and post-test design in a non-equivalent control group. The subjects of this study consisted of both the experimental group of twenty-nine and the control group of thirty coal workers' pneumoconiosis patients. Data was collected from December 10, 2002 to February 15, 2003. Foot reflexology was performed for 60 minutes twice a week through five weeks in the experimental group, but none in the control group. To evaluate the effects of foot reflexology, the scores of fatigue and insomnia were measured before and after the experiment in both groups. Fatigue was evaluated by Fatigue Symptoms Inventory. Insomnia was measured with the visual analogue scale (VAS). Data of this experiment was analyzed by Chi-square test, t-test, unpaired t-test and Repeated Measures ANOVA with the SAS Program. The scores of fatigue and insomnia decreased in the experimental group but not in the control group. There was a significant difference of fatigue and insomnia between the two groups. It is suggested that foot reflexology might have beneficial effects on reducing fatigue and insomnia in patients suffering from coal workers' pneumoconiosis, and can be recommended as a nursing intervention program for patients with coal workers' pneumoconiosis.

[The effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis].

Science.gov (United States)

Lee, Young-Mee; Sohng, Kyeong-Yae

2005-12-01

The purpose of this study was to determine the effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis. This study was a quasi-experimental study of pre-test and post-test design in a non-equivalent control group. The subjects of this study consisted of both the experimental group of twenty-nine and the control group of thirty coal workers' pneumoconiosis patients. Data was collected from December 10, 2002 to February 15, 2003. Foot reflexology was performed for 60 minutes twice a week through five weeks in the experimental group, but none in the control group. To evaluate the effects of foot reflexology, the scores of fatigue and insomnia were measured before and after the experiment in both groups. Fatigue was evaluated by Fatigue Symptoms Inventory. Insomnia was measured with the visual analogue scale (VAS). Data of this experiment was analyzed by Chi-square test, t-test, unpaired t-test and Repeated Measures ANOVA with the SAS Program. The scores of fatigue and insomnia decreased in the experimental group but not in the control group. There was a significant difference of fatigue and insomnia between the two groups. It is suggested that foot reflexology might have beneficial effects on reducing fatigue and insomnia in patients suffering from coal workers' pneumoconiosis, and can be recommended as a nursing intervention program for patients with coal workers' pneumoconiosis.

Collagen Type III and VI Turnover in Response to Long-Term Immobilization.

Directory of Open Access Journals (Sweden)

Shu Sun

Full Text Available Muscle mass and function are perturbed by immobilization and remobilization. When muscle mass changes, the quality and quantity of the extracellular matrix protein, particularly the collagens, change with it. In this study, we investigated the temporal profile of three peptide biomarkers derived from turnover of collagen type III and type VI in a long-term immobilization and remobilization study. We also compared individual biomarker levels with Lean body Mass (LBM and changes therein, hypothesizing that these biomarkers would be biomarkers of the remodeling processes associated with immobilization and/or remobilization.In the Berlin bed rest study, 20 young men were recruited and randomly assigned to 8-week's strict bed rest with or without resistive vibration exercise countermeasure. We measured three neo-epitope ELISA kits in the serum samples of this study: Pro-C3, measured the synthesis of collagen type III; Pro-C6, measured the synthesis of collagen type VI; and C6M measured the degradation of collagen type VI induced by MMP-2 and MMP-9 cleavage.Pro-C3 and Pro-C6 biomarkers are up-regulated with both immobilization and remobilization, whereas C6M is hardly affected at all. We found that Pro-C3 and C6M levels are related to LBM at baseline and that high levels of Pro-C6 are associated with smaller changes in muscle mass during both immobilization and remobilization.The Pro-C3 and-C6 biomarkers change likely reflect remodeling changes in response to unloading or reloading, whereas C6M does not appear to respond to unloading. Pro-C3 and C6M levels correlate with LBM at baseline, while Pro-C6 is related to the anabolic and catabolic responses to unloading and reloading.

Effectiveness of controlled internal drug release device treatment to alleviate reproductive seasonality in anestrus lactating or dry Barki and Rahmani ewes during non-breeding season.

Science.gov (United States)

El-Mokadem, M Y; Nour El-Din, Anm; Ramadan, T A; Rashad, A M; Taha, T A; Samak, M A; Salem, M H

2018-04-01

This study aimed to evaluate the effectiveness of hormonal treatments on ovarian activity and reproductive performance in Barki and Rahmani ewes during non-breeding season. Forty-eight multiparous ewes, 24 Barki and 24 Rahmani ewes were divided into two groups, 12 lactating and 12 dry ewes for each breed. Controlled internal drug release (CIDR) device was inserted in all ewes for 14 days in conjunction with intramuscular 500 IU equine chronic gonadotrophin (eCG) at day of CIDR removal. Data were analysed using PROC MIXED of SAS for repeated measures. Breed, physiological status and days were used as fixed effects and individual ewes as random effects. Barki ewes recorded higher (p ewes. Lactating ewes recorded higher (p ewes. Number and diameter of large follicles recorded the highest (p ewes recorded longer (p ewes. In conclusion, CIDR-eCG protocol was more potent in improving ovarian activity in Barki compared to Rahmani ewes, but this protocol seems to induce hormonal imbalance in Barki ewes that resulted in increasing conception failure compared to Rahmani ewes. © 2017 Blackwell Verlag GmbH.

Behaviour and production traits correlation of five breeds of sheep

Directory of Open Access Journals (Sweden)

Eko Handiwirawan

2012-10-01

Full Text Available Information about correlations among behavioral traits and production traits may facilitate using easily measured traits to be used as alternative criteria for indirect selection to improve other traits in sheep. The purpose of this study was to estimate correlations among behavioral and production traits of five breeds of sheep. A total of 128 head of weaned lambs and 168 ewes with nursing lambs of five breeds were used in this study, i.e. Barbados Black Belly Cross (BC, Composite Garut (KG, Local Garut (LG, Composite Sumatra (KS and St. Croix Cross (SC. Temperament was assessed in a test arena, for subsequent association with growth rate and ewe productivity. Analysis of variance of production and behavioral traits among breeds was carried out using PROC GLM of SAS software Ver. 9.0. PROCCORR was used to estimate correlations among production and behavioral variables. Weaned lambs that were more docile towards the observer had higher daily gains. Ewes that bleated more frequently when separated from their lamb had higher lamb weaning weights and lamb survival than ewes bleating fewer times under the same conditions. In BC ewes, a positive correlation was observed between frequency of bleats and lamb survival.

Family interactions in adoptive compared to nonadoptive families.

Science.gov (United States)

Rueter, Martha A; Keyes, Margaret A; Iacono, William G; McGue, Matt

2009-02-01

Despite the large and growing numbers of adoptive families, little research describes interactions in families with adopted adolescents. Yet, adopted adolescents' increased risk for adjustment problems, combined with the association between family interactions and adolescent adjustment in nonadoptive families, raises questions about differences in adoptive and nonadoptive family interactions. We compared observed and self-reported family interactions between 284 adoptive and 208 nonadoptive families and within 123 families with 1 adopted and 1 nonadopted adolescent. Adolescents averaged 14.9 years of age. Comparisons were made using analysis of variance incorporating hierarchical linear methods in SAS PROC MIXED to control family-related correlations in the data. Parents and children reported more conflict in adoptive families when compared with nonadoptive families. Families with 1 adopted and 1 nonadopted adolescent reported more conflict between parents and adopted adolescents. Observed parental behavior was similar across adoptive and nonadoptive children although adopted adolescents were less warm and, in families with 2 adopted children, more conflictual than nonadopted adolescents. These findings suggest a need for further investigation of the association between family interactions and adopted adolescent problem behavior. Copyright 2009 APA, all rights reserved.

Ifp's New Flexible Hydrocracking Process Combines Maximum Conversion with Production of High Viscosity, High Vi Lube Stocks Le nouveau procédé IFP d'hydrocraquage à haute flexibilité combine conversion maximum et production de bases, huile à haute viscosité et à indice de viscosité élevé

Directory of Open Access Journals (Sweden)

Hennico A.

2006-11-01

Full Text Available Institut Français du Pétrole (IFP has developed a new dual catalytic system for its hydrocracking process that enables high conversion to middle distillates and production of high viscosity, high VI lube stocks. Although the hydrocracking process is mainly devoted to the conversion of vacuum distillates, deasphalted oil or mixture of both into high quality middle distillates, it can also produce a residue, that after dewaxing will be a very high VI lube base oil. In this presentation major emphasis is put on the possibility to produce very high VI lubes with high viscosity thanks to the development of the new catalytic system. Large flexibility in feedstock selection and easy control of operating variables allow the production of all grades of lube oils associated with high quality middle distillates for a large range of conversion levels. L'Institut Français du Pétrole (IFP a mis au point, pour son procédé d'hydrocraquage, un nouveau système catalytique à 2 catalyseurs qui permet une forte conversion en distillats moyens et la production de fractions lubrifiantes à haute viscosité et indice de viscosité élevé. Si le procédé d'hydrocraquage est essentiellement utilisé pour la conversion de distillats sous vide, d'huile désasphaltée ou d'un mélange des deux en distillats moyens de haute qualité, il peut aussi produire un résidu qui, après déparaffinage, fournira une base pour lubrifiant à indice de viscosité très élevé. Cet article souligne particulièrement la possibilité de produire des lubrifiants à indice de viscosité très élevé et haute viscosité, grâce à ce nouveau système catalytique. Une grande flexibilité dans le choix des produits à traiter et la facilité de contrôle des paramètres opératoires permet la production de toutes les qualités d'huiles lubrifiantes associées à des distillats moyens de haute qualité, pour une large gamme de niveaux de conversion.

Military Application of Space-Time Adaptive Processing (Les applications militaires du traitement adaptatif espace-temps)

Science.gov (United States)

2003-04-01

SAR system”, Proc. EUSAR’98, 25-27 May 1998, Friedrichshafen , Ger- many [15] Farina, A., Timmoneri, L., ”Space-time processing for AEW radar”, Proc...98, Friedrichshafen , Germany, 25-27 May 1998. [PSF00] V. Pascazio, G. Schirinzi, A. Farina, “ Along track interferometry by one bit coded SAR signals...airborne multi-channel SAR systems AER II.The air- borne experimental multi-channel SAR system”, Proc. EUSAR’98, 25-27 May 1998, Friedrichshafen , Ger

Evaluation of water beef buffalo from birth to two years using different growth curves

Directory of Open Access Journals (Sweden)

W.R. Lamberson

2010-02-01

Full Text Available The buffalo is a domestic animal species of growing world-wide importance. Research to improve genetic improvement programs is important to maintain the productivity of buffalo. The objective this research was to evaluate the growth of Brazilian buffalo to two years of age with different growth curves. Growth curves consolidate the information contained in the weight-age data into three or four biologically meaningful parameters. The data included 31,452 weights at birth and 120, 205, 365, 550 and 730 days of buffalo (n = 5,178 raised on pasture without supplementation. Logistic, Gompertz, quadratic logarithmic, and linear hyperbolic curves (designated L, G, QL, and LH, respectively were fitted to the data by using proc NLIN of SAS (SAS Institute, Inc., Cary, NC, USA. The parameters estimates for L [WT= A * (((1 + exp (-k * AGE**-m] were A = 865.1 ± 5.42; k= 0.0028 ± 0.00002; M= 3.808 ± 0.007; R2 = 0.95. For G [WT= A * exp (-b * exp (-k * age] the parameters estimates were A= 967.6 ± 7.23; k = 0.00217 ± 0.000015; b = -2.8152 ± 0.00532. For QL [WT= A + b*age + k*(age*age + m*log (age] parameters estimates were A= 37.41 ± 0.48; k= 0.00019 ± 6.4E-6; b= 0.539 ± 0.006; m= 2.32 ± 0.23; R2=0.96. For LH [WT= A + b*AGE + k*(1/AGE] the parameters estimates were A= 23.15 ± 0.44; k=15.16 ± 0.66; b= 0.707 ± 0.001; R2= 0.96. Each of these curves fit these data equally well and could be used for characterizing growth to two years in beef buffalo.

Short communication: Effects of processing methods of barley grain in starter diets on feed intake and performance of dairy calves.

Science.gov (United States)

Jarrah, A; Ghorbani, G R; Rezamand, P; Khorvash, M

2013-01-01

The present study was conducted to evaluate the effects of different processing methods of barley grain in starter rations on feed intake, average daily gain, feed efficiency, skeletal growth, fecal score, and rumen pH of dairy calves. Thirty-two Holstein dairy calves (16 female and 16 male) were randomly allocated to 1 of 4 treatments consisting of coarse ground, whole, steam-rolled, or roasted barley from d 4 to 56 of birth in a completely randomized design. Starter diets were formulated to have similar ingredients and composition. All calves had free access to water and feed throughout the study period and received 4 L of milk/d from a bottle from d 4 to 41, 2L/d from d 41 to 45, and weaning occurred on d 45. Feed intake and fecal score were recorded daily. Body weight and skeletal growth measures were recorded on d 4 (beginning of the study), 45, and 56. Rumen fluid and blood samples were collected on d 35, 45, and 56. Data were analyzed using PROC MIXED of SAS (SAS Institute Inc., Cary, NC). The results indicate that different methods of processing barley had no detectable effect on dry matter intake, average daily gain, and feed efficiency and that skeletal growth, health, and rumen pH were not affected by dietary treatments. In conclusion, the results show that different processing methods of barley included in starter diets had no detectable effect on the performance of dairy calves under our experimental conditions. Therefore, feeding whole or coarsely ground barley would be a more economical method compared with steam rolled or roasted barley. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Krāsas un skaņas sintēzes metodes izmantošanas iespējas gleznošanas nodarbībās mākslas skolā

OpenAIRE

Zilberte, Baiba

2007-01-01

Viens no vizuālās mākslas izglītības mērķiem ir nodrošināt vizuālās mākslas valodas apguvi un attīstīt skolēnu izpratni par procesiem mūsdienu mākslā un mākslas komunikācijā. Mērķi nav iespējams sasniegt, ja mākslas izglītībā netiek iekļauts mūsdienu vizuālās mākslas gan lokālais, gan starptautiskais konteksts. Krāsas un skaņas sintēze kā metode var tikt pielietota mākslas pedagoģijā, lai veidotu izpratni par mūsdienu vizuālo mākslu, attīstītu skolēnu uztveri un domāšanu, paplašinātu vizuālo ...

DIMG92 : un simulateur de formation pour le procédé DIMERSOL Dimg92: a Training Simulator for the Dimersol Process

Directory of Open Access Journals (Sweden)

Nica A.

2006-11-01

Full Text Available DIMG92 est un simulateur de formation sur le procédé pétrochimique DIMERSOL (procédé IFP de dimérisation du propylène. En simulant le réacteur et ses équipements annexes, les opérateurs s'exercent à conduire l'unité et comprennent les effets des divers paramètres à prendre en compte. Le simulateur est composé de deux logiciels : - Un logiciel de modélisation, basé sur la représentation mathématique de connaissances physico-chimiques et physiques. Aucun empirisme n'est utilisé dans le modèle. Ce logiciel a été développé par l'Institut Français du Pétrole (IFP. - Un logiciel d'environnement de simulation dynamique pour la formation. Ce logiciel à interface graphique et interactive est distribué par la société française Réalisation en Systémique Industrielle (RSI. Industrial units are tending to become more and more complex and are characterized by a very high degree of integration. The operating of such units requires highly skilled operators. This is why dynamic simulators have training as their prime goal. The DIMG92 simulator falls within this category. It simulates the reaction section of the DIMERSOL G process in a steady state or not. The DIMERSOL G process is designed for the dimerization of propylene into hexene. In the modeled unit, the reaction section includes a liquid-phase reactor and a pump-around on which a heat exchanger is installed. The heat exchanger, which uses water as the cooling fluid, evacuates the heat of reaction. The reaction temperature is between 45 and 55°C. The reactor pressure is in the vicinity of 22 effective bars. The catalyst is in a liquid state. A standard feedstock is made up of 30 weight % inert matter and 70% propylene. Modeling is broken down into three parts : the kinetics, the reactor, the heat exchanger. Mathematical modeling of the oligomerization kinetics was performed at Institut Français du Pétrole (IFP in 1987. By taking into consideration the initiation

Marital status is an independent prognostic factor for pancreatic neuroendocrine tumors patients: An analysis of the Surveillance, Epidemiology, and End Results (SEER) database.

Science.gov (United States)

Zhou, Huaqiang; Zhang, Yuanzhe; Song, Yiyan; Tan, Wulin; Qiu, Zeting; Li, Si; Chen, Qinchang; Gao, Shaowei

2017-09-01

Marital status's prognostic impact on pancreatic neuroendocrine tumors (PNET) has not been rigorously studied. We aimed to explore the relationship between marital status and outcomes of PNET. We retrospectively investigated 2060 PNET cases between 2004 and 2010 from Surveillance, Epidemiology, and End Results (SEER) database. Variables were compared by Chi 2 test, t-test as appropriate. Kaplan-Meier methods and COX proportional hazard models were used to ascertain independent prognostic factors. Married patients had better 5-year overall survival (OS) (53.37% vs. 42.27%, Pvs. 59.82%, P=0.001) comparing with unmarried patients. Multivariate analysis revealed marital status is an independent prognostic factor, with married patients showing better OS (HR=0.74; 95% CI: 0.65-0.84; Punmarried patients may be associated with a delayed diagnosis with advanced tumor stage, psychosocial and socioeconomic factors. Further studies are needed. Copyright © 2017. Published by Elsevier Masson SAS.

Multilevel models applications using SAS

CERN Document Server

Wang, Jichuan; Fisher, James F

2011-01-01

This book covers a broad range of topics about multilevel modeling. The goal is to help readers to understand the basic concepts, theoretical frameworks, and application methods of multilevel modeling. It is at a level also accessible to non-mathematicians, focusing on the methods and applications of various multilevel models and using the widely used statistical software SAS®. Examples are drawn from analysis of real-world research data.

Économie d'un procédé d'hydrolyse enzymatique et fermentation de la paille de blé pour la production d'alcool carburant Economics of a Process for Producing Alcohol Fuels by Enzymatic Hydrolysis and Fermentation of Wheat Straw

Directory of Open Access Journals (Sweden)

Arlie J. P.

2006-11-01

Full Text Available Après définition des grandes lignes d'un procédé de base d'hydrolyse-fermentation de la paille de blé, l'analyse de sensibilité montre que le rendement de l'hydrolyse a une grande importance sur les bilans énergétique et économique. Des rendements de l'ordre de 85 % permettent d'obtenir des valeurs d'investissement par tonne de pétrole économisée tout à fait comparables à celles obtenues par d'autres techniques de valorisation de la biomasse en alcool, telle la synthèse du méthanol obtenu après gazéification du bois à l'oxygène. The basic features of a process for production from cereal straw of an acetone-butanol mixture for use as a gasoline substitute are described. They include pretreatment and enzymatic hydrolysis of the substrate followed by fermentation of the sugars produced. A cost evaluation based on the performances of a reference process is presented. Then, an analysis of the sensitivity of the cost price of the process to the variation of the important parameters such as production capacity, enzyme productivity, hydrolysis yield is carried out. The energy balance of the process is presented.

The effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis

Energy Technology Data Exchange (ETDEWEB)

Lee, Y.M.; Sohng, K.Y. [Kangwon Tourism College, Kangwon-Do (Republic of Korea). Department of Nursing

2005-12-15

The purpose of this study was to determine the effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis. This study was a quasi-experimental study of pre-test and post-test design in a non-equivalent control group. The subjects of this study consisted of both the experimental group of twenty-nine and the control group of thirty coal workers' pneumoconiosis patients. Data was collected from December 10, 2002 to February 15, 2003. Foot reflexology was performed for 60 minutes twice a week through five weeks in the experimental group, but none in the control group. To evaluate the effects of foot reflexology, the scores of fatigue and insomnia were measured before and after the experiment in both groups. Fatigue was evaluated by Fatigue Symptoms Inventory. Insomnia was measured with the visual analogue scale (VAS). Data of this experiment was analyzed by Chi-square test, t-test, unpaired t-test and Repeated Measures ANOVA with the SAS Program. The scores of fatigue and insomnia decreased in the experimental group but not in the control group. There was a significant difference of fatigue and insomnia between the two groups. It is suggested that foot reflexology might have beneficial effects on reducing fatigue and insomnia in patients suffering from coal workers' pneumoconiosis, and can be recommended as a nursing intervention program for patients with coal workers' pneumoconiosis.

Development of standardized laboratory methods and quality processes for a phase III study of the RTS, S/AS01 candidate malaria vaccine

Directory of Open Access Journals (Sweden)

Carter Terrell

2011-08-01

Full Text Available Abstract Background A pivotal phase III study of the RTS,S/AS01 malaria candidate vaccine is ongoing in several research centres across Africa. The development and establishment of quality systems was a requirement for trial conduct to meet international regulatory standards, as well as providing an important capacity strengthening opportunity for study centres. Methods Standardized laboratory methods and quality assurance processes were implemented at each of the study centres, facilitated by funding partners. Results A robust protocol for determination of parasite density based on actual blood cell counts was set up in accordance with World Health Organization recommendations. Automated equipment including haematology and biochemistry analyzers were put in place with standard methods for bedside testing of glycaemia, base excess and lactacidaemia. Facilities for X-rays and basic microbiology testing were also provided or upgraded alongside health care infrastructure in some centres. External quality assurance assessment of all major laboratory methods was established and method qualification by each laboratory demonstrated. The resulting capacity strengthening has ensured laboratory evaluations are conducted locally to the high standards required in clinical trials. Conclusion Major efforts by study centres, together with support from collaborating parties, have allowed standardized methods and robust quality assurance processes to be put in place for the phase III evaluation of the RTS, S/AS01 malaria candidate vaccine. Extensive training programmes, coupled with continuous commitment from research centre staff, have been the key elements behind the successful implementation of quality processes. It is expected these activities will culminate in healthcare benefits for the subjects and communities participating in these trials. Trial registration Clinicaltrials.gov NCT00866619

La biblioteca en procés de canvi

Directory of Open Access Journals (Sweden)

Alonso Arévalo, Julio

2016-06-01

Full Text Available El context de les biblioteques està mutant de la mateixa manera que passa en altres entorns socials. Les biblioteques s'han d'adaptar a un món en què cada vegada més i més informació està en format digital, accessible en qualsevol moment i en qualsevol lloc. Per això les biblioteques estan redissenyant els seus espais i les seves regles per tal de donar cabuda als nous comportaments, necessitats i hàbits que demanen els usuaris i les seves comunitats. Per aquest motiu, moltes biblioteques estan creant espais rics amb eines i tecnologies avançades que inspiren i faciliten l'aprenentatge, el descobriment, la creació i l'experimentació. Entre les propostes més innovadores hi ha la que fa referència a la biblioteca com a generadora de contingut, un espai per a la creació i dinamització de la seva comunitat.El contexto de las bibliotecas está mutando al igual que ocurre en otros entornos sociales. Las bibliotecas deben adaptarse a un mundo en el que cada vez más y más información está en formato digital, accesible en cualquier momento y en cualquier lugar, por ello las bibliotecas están rediseñando sus espacios y sus reglas para dar cabida a los nuevos comportamientos, necesidades y hábitos que demandan los usuarios y sus comunidades. Por este motivo, muchas bibliotecas están creando espacios ricos con herramientas y tecnologías avanzadas que inspiran y facilitan el aprendizaje, el descubrimiento, la creación y la experimentación. Entre las propuestas más innovadoras está la relativa a la biblioteca como generadora de contenido, un espacio para la creación y dinamización de su comunidad.Like other social environments, libraries are being required to adapt to a world where information is becoming increasingly digitized and can be accessed at any moment in any place. For this reason many library institutions are redesigning the spaces in which they offer services and the rules by which they operate, tailoring these to suit the changing behaviour, needs and habits of users and communities. Many centres are creating spaces enhanced by advanced tools and applications that inspire and facilitate learning, discovery, creation and experimentation. One of the most innovative models for change considers the library as a vehicle for content generation and a space where communities can be created and promoted.

Obligations procédurales et droit au divorce

OpenAIRE

Lauer , Mélanie

2008-01-01

There is no longer any doubt that divroce is an integral part of the family scene. But for that, divorce law has swayed between permissive law and coercive law. The law of July 11 1975 inspired a movement of liberalisation that would reign over diverce law. But it is with law of May 26 2004 that liberalisation would become more extensice. Even if this law is keeping with a form of continuity by maintaining the plurality of divorce cases, it opens the doors of divorce wider. The rules of subst...

Collagen Type III and VI Turnover in Response to Long-Term Immobilization

DEFF Research Database (Denmark)

Sun, Shu; Henriksen, Kim; Karsdal, Morten A

2015-01-01

with immobilization and/or remobilization. METHODS: In the Berlin bed rest study, 20 young men were recruited and randomly assigned to 8-week's strict bed rest with or without resistive vibration exercise countermeasure. We measured three neo-epitope ELISA kits in the serum samples of this study: Pro-C3, measured...... to unloading or reloading, whereas C6M does not appear to respond to unloading. Pro-C3 and C6M levels correlate with LBM at baseline, while Pro-C6 is related to the anabolic and catabolic responses to unloading and reloading....

Fatty acid desaturation in the marine prasinophyte Tetraselmis sp.: A sensitive indice of UV-B induced stress in marine phytoplankton

Digital Repository Service at National Institute of Oceanography (India)

Goes, J.I.; Handa, N.; Taguchi, S.; Hama, T.

stream_size 10 stream_content_type text/plain stream_name Int_Symp_Ecophysiol_Photosyn_Cultures_Proc_1993_63.pdf.txt stream_source_info Int_Symp_Ecophysiol_Photosyn_Cultures_Proc_1993_63.pdf.txt Content-Encoding ISO-8859-1 Content...

Biological studies in the Antarctic waters: A review

Digital Repository Service at National Institute of Oceanography (India)

Dhargalkar, V.K.

stream_size 12 stream_content_type text/plain stream_name Proc_Workshop_Antarct_Stud_1990_407.pdf.txt stream_source_info Proc_Workshop_Antarct_Stud_1990_407.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Marine positioning for exploration of offshore resources

Digital Repository Service at National Institute of Oceanography (India)

Nagar, V.K.; Pathak, M.C.

stream_size 15 stream_content_type text/plain stream_name Proc_Int_Symp_Mar_Positioning_1991_203.pdf.txt stream_source_info Proc_Int_Symp_Mar_Positioning_1991_203.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Standing crop and growth rates of net phytoplankton and nanoplankton in Antarctic waters

Digital Repository Service at National Institute of Oceanography (India)

Goes, J.I.; Fondekar, S.P.; Parulekar, A.H.

stream_size 16 stream_content_type text/plain stream_name Proc_Workshop_Antarct_Stud_1990_419.pdf.txt stream_source_info Proc_Workshop_Antarct_Stud_1990_419.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

HCH and DDT compounds in the sediments from the Zub lake of Schirmacher Oasis, Antarctica

Digital Repository Service at National Institute of Oceanography (India)

Sarkar, A.; Fondekar, S.P.

stream_size 9 stream_content_type text/plain stream_name Proc_Workshop_Antarct_Stud_1990_510.pdf.txt stream_source_info Proc_Workshop_Antarct_Stud_1990_510.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Bathymetric observations from 60 degrees South to Princess Astrid Kyst in Queens Maud Land, Antarctica

Digital Repository Service at National Institute of Oceanography (India)

Pathak, M.C.; Kotnala, K.L.; Prabaharan, N.; Walker, G.A.

stream_size 6 stream_content_type text/plain stream_name Proc_Workshop_Antarct_Stud_1990_138.pdf.txt stream_source_info Proc_Workshop_Antarct_Stud_1990_138.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Living resources of Antarctic India's contribution to exploration and future plans for exploration

Digital Repository Service at National Institute of Oceanography (India)

Parulekar, A.H.

stream_size 7 stream_content_type text/plain stream_name Proc_Workshop_Antarct_Stud_1990_459.pdf.txt stream_source_info Proc_Workshop_Antarct_Stud_1990_459.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Medusae from the sea around Laccadive group of islands (7 degrees-18 degrees N/69 degrees-76 degrees E)

Digital Repository Service at National Institute of Oceanography (India)

Santhakumari, V.

stream_size 7 stream_content_type text/plain stream_name 2_Workshop_Scient_Result_FORV_Sagar_Sampada_Proc_1996_249.pdf.txt stream_source_info 2_Workshop_Scient_Result_FORV_Sagar_Sampada_Proc_1996_249.pdf.txt Content-Encoding ISO-8859...

Ostracods of Andaman Sea

Digital Repository Service at National Institute of Oceanography (India)

Stephen, R.; Meenakshikunjamma, P.P.

stream_size 7 stream_content_type text/plain stream_name 2_Workshop_Scient_Result_FORV_Sagar_Sampada_Proc_1996_197.pdf.txt stream_source_info 2_Workshop_Scient_Result_FORV_Sagar_Sampada_Proc_1996_197.pdf.txt Content-Encoding ISO-8859...

Composition of heteropods in the Arabian Sea

Digital Repository Service at National Institute of Oceanography (India)

Aravindakshan, P.N.; Stephen, R.

stream_size 4 stream_content_type text/plain stream_name 2_Workshop_Scient_Result_FORV_Sagar_Sampada_Proc_1996_193.pdf.txt stream_source_info 2_Workshop_Scient_Result_FORV_Sagar_Sampada_Proc_1996_193.pdf.txt Content-Encoding ISO-8859...

Variability of surface circulation of the Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Murty, V.S.N.

stream_size 7 stream_content_type text/plain stream_name Proc_Natl_Conf_Global_Temp_Rise_2007_138.pdf.txt stream_source_info Proc_Natl_Conf_Global_Temp_Rise_2007_138.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Multimedia information system for marine archaeology

Digital Repository Service at National Institute of Oceanography (India)

Suresh, T.; Vora, K.H.; Desai, R.G.P.; Rao, S.R.

stream_size 4 stream_content_type text/plain stream_name 4_Indian_Conf_Mar_Archaeol_Proc_1994_37.pdf.txt stream_source_info 4_Indian_Conf_Mar_Archaeol_Proc_1994_37.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

National Information Centre for Marine Sciences (NICMAS) - An excellent source of information for aquaculturists

Digital Repository Service at National Institute of Oceanography (India)

Tapaswi, M.P.

stream_size 4 stream_content_type text/plain stream_name Proc_Natl_Workshop_Aquacult_WeeK_1998_258.pdf.txt stream_source_info Proc_Natl_Workshop_Aquacult_WeeK_1998_258.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Foraminiferal studies from the west coast of India: Relevance to PAGES program

Digital Repository Service at National Institute of Oceanography (India)

Nigam, R.

stream_size 5 stream_content_type text/plain stream_name Proc_PW_SAP_2000_1.pdf.txt stream_source_info Proc_PW_SAP_2000_1.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Dynamics of currents in the coastal region of India

Digital Repository Service at National Institute of Oceanography (India)

Shetye, S.R.

stream_size 2 stream_content_type text/plain stream_name Proc_Natl_Conf_Curr_Trends_Ocean_Prediction_1998_1.pdf.txt stream_source_info Proc_Natl_Conf_Curr_Trends_Ocean_Prediction_1998_1.pdf.txt Content-Encoding ISO-8859-1 Content...

Ceramic industries of Poompuhar

Digital Repository Service at National Institute of Oceanography (India)

Gaur, A.S.

stream_size 5 stream_content_type text/plain stream_name 4_Indian_Conf_Mar_Archaeol_Proc_1997_127.pdf.txt stream_source_info 4_Indian_Conf_Mar_Archaeol_Proc_1997_127.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Role of Chilka lake in the maritime history of Orissa

Digital Repository Service at National Institute of Oceanography (India)

Pattanayak, A.K; Tripati, S.

stream_size 4 stream_content_type text/plain stream_name 4_Indian_Conf_Mar_Archaeol_Proc_1997_83.pdf.txt stream_source_info 4_Indian_Conf_Mar_Archaeol_Proc_1997_83.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Inter-comparison between Aanderaa and Potok current meters deployed during INDEX programme

Digital Repository Service at National Institute of Oceanography (India)

Fernandes, A.A.; Pednekar, S.M.; Vethamony, P.

stream_size 8 stream_content_type text/plain stream_name Proc_Third_ISOPE_Ocean_Mining_Symp_1999_169.pdf.txt stream_source_info Proc_Third_ISOPE_Ocean_Mining_Symp_1999_169.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Estimation of wave forces on a tethered spherical float using potential flow theory

Digital Repository Service at National Institute of Oceanography (India)

Vethamony, P.; Chandramohan, P.; Sastry, J.S.

stream_size 9 stream_content_type text/plain stream_name Proc_Int_Conf_Coast_Port_Eng_Dev_Countries_1991_1442.pdf.txt stream_source_info Proc_Int_Conf_Coast_Port_Eng_Dev_Countries_1991_1442.pdf.txt Content-Encoding ISO-8859...

Flow effects on a pressure sensor

Digital Repository Service at National Institute of Oceanography (India)

Joseph, A; Desa, J.A; Desa, E.; Foden, P.; Taylor, K.

stream_size 6 stream_content_type text/plain stream_name Proc_Sympol-95_1995_11.pdf.txt stream_source_info Proc_Sympol-95_1995_11.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Carbon inventories and atmospheric temperatures: A global and regional perspective

Digital Repository Service at National Institute of Oceanography (India)

DileepKumar, M.

stream_size 3 stream_content_type text/plain stream_name Proc_Natl_Conf_Global_Temp_Rise_2007_133.pdf.txt stream_source_info Proc_Natl_Conf_Global_Temp_Rise_2007_133.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Influence of carbon sequestration on biogeochemistry of carbon in the ocean

Digital Repository Service at National Institute of Oceanography (India)

Sarma, V.V.S.S

stream_size 8 stream_content_type text/plain stream_name Proc_Natl_Conf_Global_Temp_Rise_2007_125.pdf.txt stream_source_info Proc_Natl_Conf_Global_Temp_Rise_2007_125.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Integrated management of sustainable development and environmental protection along the Indian coasts

Digital Repository Service at National Institute of Oceanography (India)

Sawkar, K.

stream_size 7 stream_content_type text/plain stream_name Proc_South_Asia_Workshop_Estuar_Model_CZM_!999_183.pdf.txt stream_source_info Proc_South_Asia_Workshop_Estuar_Model_CZM_!999_183.pdf.txt Content-Encoding ISO-8859-1 Content...

Integrated multi purpose underwater station

Digital Repository Service at National Institute of Oceanography (India)

Afzulpurkar, S.

stream_size 6 stream_content_type text/plain stream_name Proc_SYMPOL-'95_1995_46.pdf.txt stream_source_info Proc_SYMPOL-'95_1995_46.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Propagation of tides in the Mandovi-Zuari estuarine network

Digital Repository Service at National Institute of Oceanography (India)

Shetye, S.R.; Gouveia, A.D.; Singbal, S.Y.S.; Naik, C.G.; Sundar, D.; Michael, G.S.; Nampoothiri, G.

stream_size 20 stream_content_type text/plain stream_name Proc_Workshop_ICMAM_Plan_Goa_1999_174.pdf.txt stream_source_info Proc_Workshop_ICMAM_Plan_Goa_1999_174.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Marine environmental status and coastal zone management issues in India

Digital Repository Service at National Institute of Oceanography (India)

Zingde, M.D.

stream_size 14 stream_content_type text/plain stream_name Proc_South_Asia_Workshop_Estuar_Model_CZM_!999_153.pdf.txt stream_source_info Proc_South_Asia_Workshop_Estuar_Model_CZM_!999_153.pdf.txt Content-Encoding ISO-8859-1 Content...

Default-mode network and deep gray-matter analysis in neuromyelitis optica patients.

Science.gov (United States)

Rueda-Lopes, Fernanda C; Pessôa, Fernanda M C; Tukamoto, Gustavo; Malfetano, Fabíola Rachid; Scherpenhuijzen, Simone Batista; Alves-Leon, Soniza; Gasparetto, Emerson L

2018-02-20

The aim of our study was to detect functional changes in default-mode network of neuromyelitis optica (NMO) patients using resting-state functional magnetic resonance images and the evaluation of subcortical gray-matter structures volumes. NMO patients (n=28) and controls patients (n=19) were enrolled. We used the integrated registration and segmentation tool, part of FMRIB's Software Library (FSL) to segment subcortical structures including the thalamus, caudate nucleus, putamen, hippocampus and amygdalae. Resting-state functional magnetic resonance images were post-processed using the Multivariate Exploratory Linear Optimized Decomposition into Independent Components, also part of FSL. Average Z-values extracted from the default-mode network were compared between patients and controls using t-tests (P values default-mode network of patients compared to controls, notably in the precuneus and right hippocampus (corrected Pdefault-mode network. The hyperactivity of certain default-mode network areas may reflect cortical compensation for subtle structural damage in NMO patients. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Marine placer mineral exploration - a case study

Digital Repository Service at National Institute of Oceanography (India)

Rajamanickam, G.V.; Gujar, A.R.; Ramana, M.V.

stream_size 18 stream_content_type text/plain stream_name Proc_Natl_Semin_Ind_Min_Natl_Economy_1990_57.pdf.txt stream_source_info Proc_Natl_Semin_Ind_Min_Natl_Economy_1990_57.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Characteristic mixing triangles in the Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Varkey, M.J.; Sastry, J.S.

stream_size 4 stream_content_type text/plain stream_name Phys_Process_Indian_Sea_Proc_1_1992_47.pdf.txt stream_source_info Phys_Process_Indian_Sea_Proc_1_1992_47.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Ocean wave spectral estimation by reduced order arma algorithms

Digital Repository Service at National Institute of Oceanography (India)

Witz, J.A.; Mandal, S.; Lyons, G.J.

stream_size 9 stream_content_type text/plain stream_name 11_Int_Conf_Offshore_Mech_Arctic_Eng_Proc_1992_1_17.pdf.txt stream_source_info 11_Int_Conf_Offshore_Mech_Arctic_Eng_Proc_1992_1_17.pdf.txt Content-Encoding ISO-8859...

Multivariate autoregressive algorithms for ocean wave modelling

Digital Repository Service at National Institute of Oceanography (India)

Mandal, S.; Lyons, G.J.; Witz, J.A.

stream_size 8 stream_content_type text/plain stream_name 2_Int_Offshore_Polar_Eng_Conf_Proc_1992_77.pdf.txt stream_source_info 2_Int_Offshore_Polar_Eng_Conf_Proc_1992_77.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Ocean data reduction and multi-sensor fusion studies of the Chesapeake region

Digital Repository Service at National Institute of Oceanography (India)

Tilley, D.G.; Sarma, Y.V.B.; Beal, R.C.

stream_size 4 stream_content_type text/plain stream_name Proc_IGARSS-92_1992_1_665.pdf.txt stream_source_info Proc_IGARSS-92_1992_1_665.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Strategy for increasing marine fish production in Goa

Digital Repository Service at National Institute of Oceanography (India)

Parulekar, A

stream_size 5 stream_content_type text/plain stream_name Proc_Workshop_Evol_Strat_Dev_Agric_Anim_Husb_Fish_Goa_1991_73.pdf.txt stream_source_info Proc_Workshop_Evol_Strat_Dev_Agric_Anim_Husb_Fish_Goa_1991_73.pdf.txt Content...

First records and a comparative study of larvae of Arnoglossus tapeinosoma (Bleeker) and Arnoglossus aspilos (Bleeker) (Bothidae-Pisces) from the Indian Ocean and adjacent waters

Digital Repository Service at National Institute of Oceanography (India)

Devi, C.B.L.

stream_size 3 stream_content_type text/plain stream_name Proc_Kerala_Sci_Cong_1991_158.pdf.txt stream_source_info Proc_Kerala_Sci_Cong_1991_158.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

A proposed configuration for remote current measurements

Digital Repository Service at National Institute of Oceanography (India)

Joseph, A.; Desai, R.G.P.

stream_size 9 stream_content_type text/plain stream_name 5_Int_Symp_Acoust_Remote_Sens_Proc_1990_230.pdf.txt stream_source_info 5_Int_Symp_Acoust_Remote_Sens_Proc_1990_230.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Genetic and morphological variations in the Indian mackerel Rastrelliger kanagurta (Cuvier 1817) from the Goa region

Digital Repository Service at National Institute of Oceanography (India)

Menezes, M.R.; Naik, S.; Martins, M.

stream_size 9 stream_content_type text/plain stream_name Proc_Indian_Acad_Sci_(Anim_Sci)_99_457.pdf.txt stream_source_info Proc_Indian_Acad_Sci_(Anim_Sci)_99_457.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Spectral representation of measured shallow water waves

Digital Repository Service at National Institute of Oceanography (India)

SanilKumar, V.; Mandal, S.; Anand, N.M.; Nayak, B.U.

stream_size 10 stream_content_type text/plain stream_name INCHOE_Proc_1994_1_A23.pdf.txt stream_source_info INCHOE_Proc_1994_1_A23.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Motion characteristics of a tethered float in regular waves

Digital Repository Service at National Institute of Oceanography (India)

Vethamony, P.; Sastry, J.S.; Narasimhan, S.

stream_size 8 stream_content_type text/plain stream_name 1_Int_Offshore_Polar_Eng_Conf_Proc_1991_510.pdf.txt stream_source_info 1_Int_Offshore_Polar_Eng_Conf_Proc_1991_510.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Multibeam echosounder pseudo sidescan images as a tool for manganese nodule exploration

Digital Repository Service at National Institute of Oceanography (India)

Kodagali, V.N.; Chakraborty, B.

stream_size 8 stream_content_type text/plain stream_name Proc_3rd_ISOPE_Ocean_Mining_Symp_1999_97.pdf.txt stream_source_info Proc_3rd_ISOPE_Ocean_Mining_Symp_1999_97.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Petroleum hydrocarbons in some ports along the west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Kadam, A.N.; Bhangale, V.P

stream_size 6 stream_content_type text/plain stream_name 2_Int_Conf_Environ_Plan_Manage_Proc_1992_43.pdf.txt stream_source_info 2_Int_Conf_Environ_Plan_Manage_Proc_1992_43.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

Variations in zooplankton density in the Cochin backwater consequent to environmental changes

Digital Repository Service at National Institute of Oceanography (India)

Stephen, R.

stream_size 2 stream_content_type text/plain stream_name Proc_Kerala_Sci_Cong_1991_57.pdf.txt stream_source_info Proc_Kerala_Sci_Cong_1991_57.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Measurement and prediction of tides for Gopalpur Post, Orissa

Digital Repository Service at National Institute of Oceanography (India)

Chandramohan, P; SanilKumar, V.; Nayak, B.U.

stream_size 10 stream_content_type text/plain stream_name INCHOE_Proc_1994_1_D73.pdf.txt stream_source_info INCHOE_Proc_1994_1_D73.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Surficial geology off Karwar, central west coast of India: Its implications for offshore developmental activities

Digital Repository Service at National Institute of Oceanography (India)

Veerayya, M.; Ramana, M.V.; Pathak, M.C.; Chauhan, O.S.

stream_size 10 stream_content_type text/plain stream_name INCHOE_Proc_1994_1_D63.pdf.txt stream_source_info INCHOE_Proc_1994_1_D63.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Geomorphology and shallow structure of the direction bank off Bombay, western continental margin of India: Its implications for offshore exploration

Digital Repository Service at National Institute of Oceanography (India)

Veerayya, M.; Subrahmanyam, V.

stream_size 10 stream_content_type text/plain stream_name INCHOE_Proc_1994_1_D53.pdf.txt stream_source_info INCHOE_Proc_1994_1_D53.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

The SAMS: Smartphone Addiction Management System and verification.

Science.gov (United States)

Lee, Heyoung; Ahn, Heejune; Choi, Samwook; Choi, Wanbok

2014-01-01

While the popularity of smartphones has given enormous convenience to our lives, their pathological use has created a new mental health concern among the community. Hence, intensive research is being conducted on the etiology and treatment of the condition. However, the traditional clinical approach based surveys and interviews has serious limitations: health professionals cannot perform continual assessment and intervention for the affected group and the subjectivity of assessment is questionable. To cope with these limitations, a comprehensive ICT (Information and Communications Technology) system called SAMS (Smartphone Addiction Management System) is developed for objective assessment and intervention. The SAMS system consists of an Android smartphone application and a web application server. The SAMS client monitors the user's application usage together with GPS location and Internet access location, and transmits the data to the SAMS server. The SAMS server stores the usage data and performs key statistical data analysis and usage intervention according to the clinicians' decision. To verify the reliability and efficacy of the developed system, a comparison study with survey-based screening with the K-SAS (Korean Smartphone Addiction Scale) as well as self-field trials is performed. The comparison study is done using usage data from 14 users who are 19 to 50 year old adults that left at least 1 week usage logs and completed the survey questionnaires. The field trial fully verified the accuracy of the time, location, and Internet access information in the usage measurement and the reliability of the system operation over more than 2 weeks. The comparison study showed that daily use count has a strong correlation with K-SAS scores, whereas daily use times do not strongly correlate for potentially addicted users. The correlation coefficients of count and times with total K-SAS score are CC = 0.62 and CC =0.07, respectively, and the t-test analysis for the

A loud auditory stimulus overcomes voluntary movement limitation in cervical dystonia.

Directory of Open Access Journals (Sweden)

Tereza Serranová

Full Text Available BACKGROUND: Patients with cervical dystonia (CD present with an impaired performance of voluntary neck movements, which are usually slow and limited. We hypothesized that such abnormality could involve defective preparation for task execution. Therefore, we examined motor preparation in CD patients using the StartReact method. In this test, a startling auditory stimulus (SAS is delivered unexpectedly at the time of the imperative signal (IS in a reaction time task to cause a faster execution of the prepared motor programme. We expected that CD patients would show an abnormal StartReact phenomenon. METHODS: Fifteen CD patients and 15 age matched control subjects (CS were asked to perform a rotational movement (RM to either side as quick as possible immediately after IS perception (a low intensity electrical stimulus to the II finger. In randomly interspersed test trials (25% a 130 dB SAS was delivered simultaneously with the IS. We recorded RMs in the horizontal plane with a high speed video camera (2.38 ms per frame in synchronization with the IS. The RM kinematic-parameters (latency, velocity, duration and amplitude were analyzed using video-editing software and screen protractor. Patients were asked to rate the difficulty of their RMs in a numerical rating scale. RESULTS: In control trials, CD patients executed slower RMs (repeated measures ANOVA, p<0.10(-5, and reached a smaller final head position angle relative to the midline (p<0.05, than CS. In test trials, SAS improved all RMs in both groups (p<0.10(-14. In addition, patients were more likely to reach beyond their baseline RM than CS (χ(2, p<0.001 and rated their performance better than in control trials (t-test, p<0.01. CONCLUSION: We found improvement of kinematic parameters and subjective perception of motor performance in CD patients with StartReact testing. Our results suggest that CD patients reach an adequate level of motor preparation before task execution.

HyGenSys: a Flexible Process for Hydrogen and Power Production with Reduction of CO2 Emission HyGenSys : un procédé flexible de production d’hydrogène et d’électricité avec réduction des émissions de CO2

Directory of Open Access Journals (Sweden)

Giroudière F.

2010-09-01

Full Text Available This paper presents the latest development of HyGenSys, a new sustainable process and technology for the conversion of natural gas to hydrogen and power. The concept combines a specific steam reforming reactor-exchanger with a gas turbine. The heat necessary for the steam reforming reaction comes from hot pressurized flue gases produced in a gas turbine instead of a conventional furnace. Thanks to this high level of heat integration, the overall efficiency is improved and the natural gas consumption is reduced which represents an advantage with regard to economics and CO2 emission reduction. In addition to the efficient HyGenSys process scheme itself, the technology of the reactorexchanger also offers a high level of heat integration for even more energy saving. Two main alternatives are examined in order to meet two different requirements. The first one, named HyGenSys-0, focuses on the hydrogen production for the refining and petrochemical application. The second one named HyGenSys-1, concerns the centralized power production with pre-combustion CO2capture. In that case, the produced hydrogen is fully used to fuel a power gas turbine. HyGenSys-1 has been developed and optimised in CACHET, a European Community funded project. The CACHET electrical power objective was 400 MW at the minimum. HyGenSys-0 and HyGenSys-1 are described in detail with challenges and advantages compared to existing technologies. For both alternatives, the heart of the technology is the reactor-exchanger. The reactor-exchanger design relies on an innovative arrangement of bayonet tubes that allows, at large scale, multiple heat exchanges between hot pressurized flue gas, natural gas feed and hydrogen rich stream produced. Cet article présente les développements récents d’HyGenSys, nouvel éco-procédé de conversion du gaz naturel en hydrogène et électricité. Le concept combine un réacteur-échangeur spécifique de reformage à la vapeur avec une turbine à gaz

Development and Validation of a Standardized Tool for Prioritization of Information Sources.

Science.gov (United States)

Akwar, Holy; Kloeze, Harold; Mukhi, Shamir

2016-01-01

To validate the utility and effectiveness of a standardized tool for prioritization of information sources for early detection of diseases. The tool was developed with input from diverse public health experts garnered through survey. Ten raters used the tool to evaluate ten information sources and reliability among raters was computed. The Proc mixed procedure with random effect statement and SAS Macros were used to compute multiple raters' Fleiss Kappa agreement and Kendall's Coefficient of Concordance. Ten disparate information sources evaluated obtained the following composite scores: ProMed 91%; WAHID 90%; Eurosurv 87%; MediSys 85%; SciDaily 84%; EurekAl 83%; CSHB 78%; GermTrax 75%; Google 74%; and CBC 70%. A Fleiss Kappa agreement of 50.7% was obtained for ten information sources and 72.5% for a sub-set of five sources rated, which is substantial agreement validating the utility and effectiveness of the tool. This study validated the utility and effectiveness of a standardized criteria tool developed to prioritize information sources. The new tool was used to identify five information sources suited for use by the KIWI system in the CEZD-IIR project to improve surveillance of infectious diseases. The tool can be generalized to situations when prioritization of numerous information sources is necessary.

Blended learning with Moodle in medical statistics: an assessment of knowledge, attitudes and practices relating to e-learning.

Science.gov (United States)

Luo, Li; Cheng, Xiaohua; Wang, Shiyuan; Zhang, Junxue; Zhu, Wenbo; Yang, Jiaying; Liu, Pei

2017-09-19

Blended learning that combines a modular object-oriented dynamic learning environment (Moodle) with face-to-face teaching was applied to a medical statistics course to improve learning outcomes and evaluate the impact factors of students' knowledge, attitudes and practices (KAP) relating to e-learning. The same real-name questionnaire was administered before and after the intervention. The summed scores of every part (knowledge, attitude and practice) were calculated using the entropy method. A mixed linear model was fitted using the SAS PROC MIXED procedure to analyse the impact factors of KAP. Educational reform, self-perceived character, registered permanent residence and hours spent online per day were significant impact factors of e-learning knowledge. Introversion and middle type respondents' average scores were higher than those of extroversion type respondents. Regarding e-learning attitudes, educational reform, community number, Internet age and hours spent online per day had a significant impact. Specifically, participants whose Internet age was no greater than 6 years scored 7.00 points lower than those whose Internet age was greater than 10 years. Regarding e-learning behaviour, educational reform and parents' literacy had a significant impact, as the average score increased 10.05 points (P learning KAP. Additionally, this type of blended course can be implemented in many other curriculums.

On the Multilevel Nature of Meta-Analysis: A Tutorial, Comparison of Software Programs, and Discussion of Analytic Choices.

Science.gov (United States)

Pastor, Dena A; Lazowski, Rory A

2018-01-01

The term "multilevel meta-analysis" is encountered not only in applied research studies, but in multilevel resources comparing traditional meta-analysis to multilevel meta-analysis. In this tutorial, we argue that the term "multilevel meta-analysis" is redundant since all meta-analysis can be formulated as a special kind of multilevel model. To clarify the multilevel nature of meta-analysis the four standard meta-analytic models are presented using multilevel equations and fit to an example data set using four software programs: two specific to meta-analysis (metafor in R and SPSS macros) and two specific to multilevel modeling (PROC MIXED in SAS and HLM). The same parameter estimates are obtained across programs underscoring that all meta-analyses are multilevel in nature. Despite the equivalent results, not all software programs are alike and differences are noted in the output provided and estimators available. This tutorial also recasts distinctions made in the literature between traditional and multilevel meta-analysis as differences between meta-analytic choices, not between meta-analytic models, and provides guidance to inform choices in estimators, significance tests, moderator analyses, and modeling sequence. The extent to which the software programs allow flexibility with respect to these decisions is noted, with metafor emerging as the most favorable program reviewed.

Lactation curve of cross-bred buffalo under two production systems in the Amazonian region of Brazil

Directory of Open Access Journals (Sweden)

A.C. Ribeiro Neto

2010-02-01

Full Text Available This study was conducted at the Agroforestry Research Center of EMBRAPA (CPAFRO, Rondônia, Brazil, to evaluate the lactation curve of crosss-bred buffalo [Murrah (M, Mediterranean (Me and Jafarabadi(J] under two production systems. Production system one (PS1 corresponded to the period of 1984 to 1998 where animals (4471 observation were milked once a day and received only pasture without supplementation. Production system two (PS2 corresponded to the period of 1999 to 2002 where animals (458 observations were milked twice daily with concentrate supplementation to pasture. Eight mathematical functions were used: Inverse Polynomial, Linear Hyperbolic, Incomplete Gamma, Logarithmic, Logarithmic Quadratic, Linear, Quadratic and Jenkins & Ferrel. Statistical analysis was conducted using PROC NLIN of SAS (2005. Results showed that for both production systems, Incomplete Gama was the best function to describe the lactation curve. Values of coefficient of determination, standard-deviation, coefficient of variation and standard-error were 95%, 0.068, 7.20, and 0.003, respectively. The corresponding values for PS2 were 96%, 0.200, 2.12, and 0.003. Values of the lactation curve parameters (a, b, and c for PS1 and PS2, respectively, were (a 7.0035923 and 10.9209, (b -0.1080043 and -0.1614882, (c 0.0434868 and 0.0679365.

Zooplankton studies in the south west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Devi, C.B.L.; Meenakshikunjamma, P.P.; Narayanan, B.

stream_size 3 stream_content_type text/plain stream_name 4_Kerala_Sci_Cong_Proc_1992_264.pdf.txt stream_source_info 4_Kerala_Sci_Cong_Proc_1992_264.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Moulting and moult quality in eye-stalk ablated penaeid prawn, Metapenaeus monoceros (Fabricius)

Digital Repository Service at National Institute of Oceanography (India)

Venkitaraman, P.R.; Sivadas, P.

stream_size 3 stream_content_type text/plain stream_name 4_Kerala_Sci_Cong_Proc_1992_271.pdf.txt stream_source_info 4_Kerala_Sci_Cong_Proc_1992_271.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Seamounts in the Central Indian Ocean Basin: indicators of the Indian plate movement

Digital Repository Service at National Institute of Oceanography (India)

Mukhopadhyay, R.; Khadge, N.H.

stream_size 9 stream_content_type text/plain stream_name Proc_Indian_Acad_Sci_(EPS)_99_357.pdf.txt stream_source_info Proc_Indian_Acad_Sci_(EPS)_99_357.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Air-sea interaction over the tropical Indian Ocean during several contrasting monsoon seasons

Digital Repository Service at National Institute of Oceanography (India)

RameshKumar, M.R.; Sastry, J.S.

stream_size 12 stream_content_type text/plain stream_name Proc_Indian_Acad_Sci_(EPS)_99_393.pdf.txt stream_source_info Proc_Indian_Acad_Sci_(EPS)_99_393.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Protein structure validation and refinement using amide proton chemical shifts derived from quantum mechanics

DEFF Research Database (Denmark)

Christensen, Anders Steen; Linnet, Troels Emtekær; Borg, Mikael

2013-01-01

We present the ProCS method for the rapid and accurate prediction of protein backbone amide proton chemical shifts - sensitive probes of the geometry of key hydrogen bonds that determine protein structure. ProCS is parameterized against quantum mechanical (QM) calculations and reproduces high level...

Biochemical composition of zooplankton from the offshore oil fields of Bombay

Digital Repository Service at National Institute of Oceanography (India)

Krishnakumari, L.; Nair, V.R.; Gajbhiye, S.N.

stream_size 7 stream_content_type text/plain stream_name Proc_Natl_Acad_Sci_India_63(B)_II_161.pdf.txt stream_source_info Proc_Natl_Acad_Sci_India_63(B)_II_161.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Viscous dissipation effects on heat transfer inflow past a continuously moving porous plate

Digital Repository Service at National Institute of Oceanography (India)

Murty, T.V.R.; Soundalgekar, V.M.

stream_size 6 stream_content_type text/plain stream_name Proc_Math_Soc_B.H.U_11_53.pdf.txt stream_source_info Proc_Math_Soc_B.H.U_11_53.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

River ports and other archaeological sites on the river banks of Goa

Digital Repository Service at National Institute of Oceanography (India)

Nambirajan, M.; Gaur, A.S.

stream_size 5 stream_content_type text/plain stream_name 4_Indian_Conf_Mar_Archaeol_Proc_1997_115.pdf.txt stream_source_info 4_Indian_Conf_Mar_Archaeol_Proc_1997_115.pdf.txt Content-Encoding ISO-8859-1 Content-Type text.../plain; charset=ISO-8859-1 ...

Investigation of normal force and moment coefficients for an AUV at nonlinear angle of attack and sideslip range

Digital Repository Service at National Institute of Oceanography (India)

Barros, E.A. de; Dantas, J.L.D.; Pascoal, A.M.; Desa, E.S.

-dimensional axi-symmetric body,” in Proc. 6th ISOPE Conf., Los Angeles, CA, 1996, vol. II, pp. 256–264. [8] D. Humphreys, “Correlation and validation of a CFD based hydrody- namic & dynamic model for a towed underwater vehicle,” in Proc. MTS/IEEE OCEANS Conf...

"Networking" science and technology education - Opportunities and challenges

Digital Repository Service at National Institute of Oceanography (India)

Nayak, M.R.

stream_size 8 stream_content_type text/plain stream_name ICASE_03_W_Conf_S_T_Edu_Proc_588.pdf.txt stream_source_info ICASE_03_W_Conf_S_T_Edu_Proc_588.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

The Shock and Vibration Digest. Volume 16, Number 6

Science.gov (United States)

1984-06-01

Meuurement of Rigid Body Modes for Dynamic Deagn N. Okuboand T. Furukawa CAMAL Chuo Univ., Tokyo, Japan, Intl. Modal Analysis Conf., Proc. 2nd, Orlando... CAMAL , Chuo Univ., Tokyo, Japan, Intl. VV :ä\\ Analysis Conf., Proc. 2nd, Orlando, FL, Feh ö-Q. 1984, Spons. by Union College

[Impact of music therapy on anxiety and depression for patients with Alzheimer's disease and on the burden felt by the main caregiver (feasibility study)].

Science.gov (United States)

Guetin, S; Portet, F; Picot, M-C; Defez, C; Pose, C; Blayac, J-P; Touchon, J

2009-02-01

during the session and to stimulate the patient's cognitive functions by recalling memories and images from his past life experience. The main evaluation criterion was regular session attendance at the hospital. Secondary criteria were: anxiety score (Hamilton scale), depression score (Cornell scale) and the burden score felt by the main caregiver (Zarit scale). Evaluations took place at W1, W4 and W10. The score evolution on the Hamilton, Cornell and Zarit scales were tested using the Wilcoxon test on paired data. The significance threshold has conventionally been set at 5% for all tests used. The statistical analysis was done using the SAS software (8th version) (SAS Institute, Cary, N.C.; proc npar1way, proc univariate, proc freq). Alzheimer's disease is a recognized indication for music therapy. A simple oral consent was collected prior to the study inclusion. Five patients were included for a total of 44 sessions. The patients' regular attendance at the music therapy sessions showed its feasibility. Thanks to oral feedback, we were able to see that music therapy was very well-accepted both by patients and caregivers. After the sessions, all patients expressed a sensation of well-being and pleasure, such as: "Music made me feel better, I feel more relaxed", "I feel better", "I didn't know that music could have such an impact on me"... Other verbal comments were collected regarding the patients' previous life experience: "This music reminds me of my childhood", "I imagined myself dancing just like I used to in the old days", "This reminds me of my trip to Italy with my children"... The level of anxiety (Hamilton scale) dropped significantly from 9.4 (+/-2.2) to 3.4 (+/-2.6) between the first session and the fourth session (Pmusic therapy in terms of its impact on the overall care for patients suffering from Alzheimer's disease. This easily applicable technique can be useful in treating anxiety and depression in a patient with Alzheimer's disease and also in relieving

Contribuições da investigação de díades de terapeutas e clientes portugueses

OpenAIRE

Pereira Soares, Maria Luísa

2007-01-01

En el sentit de contribuir al desenvolupament de la recerca en l'àrea del procés i el resultat terapèutic a nivell nacional, aquest estudi ha observat característiques del terapeuta i del client, així com varis aspectes del procés i el resultat terapèutics: i) l'estil de terapeuta i l'estil de coping, grau de resistència i motivació del client per a la teràpia; al nivell del procés, ii) l'aliança terapèutica i, al nivell del resultat terapèutic, iii) ha avaluat el benestar general i la condic...

Persepsi Pengguna Layanan Pengadaan Barang dan Jasa pada Pemerintah Kota Yogyakarta terhadap Implementasi Sistem E Procurement

Directory of Open Access Journals (Sweden)

Ita Akyuna Nightisabha

2011-03-01

Full Text Available This study aims to evaluate the implementation of electronic procurement of goods and services by the Government City of Yogyakarta, as an effort to create good governance especially in terms of procurement. This study compares the perceptions of user that consist of procurement committee and the providers of goods and services. Research location is in Layanan Pengadaan Secara Elektronik (LPSE of Government City of Yogyakarta as a system developer with the sample of the procurement committee and partner of goods and services that are spread in Yogyakarta and surrounding areas. This research uses t-test by using a reference measurement system on the success of end-user computing satisfaction developed by Torzadeh and Doll (1991. The results show a difference of perception between the committee and the procurement of goods and services providers to the implementation of e-proc system. There is difference in perception between users of e-procurement supplier of goods / services and the procurement committee. Implementation of e-procurement system is being run by the Government City of Yogyakarta is currently has not been relatively applied, because the technology gap that has led to the differences in perception between the committee and the procurement of goods and services providers.Keywords: good governance, e-procurement, perception

Administrateur de la trésorerie (h/f) | CRDI - Centre de recherches ...

International Development Research Centre (IDRC) Digital Library (Canada)

examen annuel des procédures de gestion de la trésorerie et des processus de paiement;; Procéder au dépôt électronique de tous les documents constitutifs conformément aux normes applicables;; Préparer une analyse comptable périodique et ...

Medical Models and Bayesian Networks

DEFF Research Database (Denmark)

Olesen, Kristian Grønborg

1999-01-01

Proc. of a Workshop Held during the Joint European Conf. on Artificial Intelligence in Medicine and Medical Decision Making : AIMDM'99, Aalborg, Denmark, June 1999......Proc. of a Workshop Held during the Joint European Conf. on Artificial Intelligence in Medicine and Medical Decision Making : AIMDM'99, Aalborg, Denmark, June 1999...

Evaluation of Low-volume Sprayers Used in Asian Citrus Psyllid Control Applications

Science.gov (United States)

2010-06-01

control, p. 149–157. In: B. Aubert, S. Tontyaporn, and D. Buangsuwon (eds.). Proc. Asia Pacific Intl. Conf. Citriculture, Chiang Mai , Thailand, 4–10...planning and management, p. 77–82. In: B. Aubert, S. Tontyaporn, and D. Buangsuwon (eds.). Proc. Asia Pacific Intl. Conf. Citriculture, Chiang Mai , Thailand

Overexploitation of marine living resources

Digital Repository Service at National Institute of Oceanography (India)

Ansari, Z.A.; Ingole, B.S.

stream_size 2 stream_content_type text/plain stream_name Proc_Workshop_Conserv_Biodiversity_Western_Ghat_1994_3.3_1.pdf.txt stream_source_info Proc_Workshop_Conserv_Biodiversity_Western_Ghat_1994_3.3_1.pdf.txt Content-Encoding ISO...-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Polarimetric and Indoor Imaging Fusion Based on Compressive Sensing

Science.gov (United States)

2013-04-01

34 in Proc. IEEE Radar Conf, Rome, Italy , May 2008. [17] M. G. Amin, F. Ahmad, W. Zhang, "A compressive sensing approach to moving target... Ferrara , J. Jackson, and M. Stuff, "Three-dimensional sparse-aperture moving-target imaging," in Proc. SPIE, vol. 6970, 2008. [43] M. Skolnik (Ed

26 CFR 1.442-1 - Change of annual accounting period.

Science.gov (United States)

2010-04-01

... computing its taxable income and for making its Federal income tax returns. If the taxpayer wants to change.... Proc. 2002-37, 2002-22 I.R.B., automatic approval procedures for certain corporations; Rev. Proc. 2002-38, 2002-22 I.R.B., automatic approval procedures for partnerships, S corporations, electing S...

Circulating progesterone concentrations in nonlactating Holstein cows during reuse of intravaginal progesterone implants sanitized by autoclave or chemical disinfection.

Science.gov (United States)

Melo, L F; Monteiro, P L J; Oliveira, L H; Guardieiro, M M; Drum, J N; Wiltbank, M C; Sartori, R

2018-04-01

The aim of this study was to compare plasma progesterone (P4) concentrations in nonlactating, multiparous Holstein cows (n = 24) treated with 2 types of intravaginal implants containing either 1.0 or 1.9 g of P4 either at the first use or during reuse of the implants after sanitizing the implant by autoclave or chemical disinfection. In a completely randomized design with a 2 × 3 factorial arrangement and 2 replicates, every cow underwent 2 of 6 treatments. Two sources of P4 [controlled internal drug release (1.9 g of P4) from Zoetis (São Paulo, Brazil), and Sincrogest (1.0 g of P4) from Ourofino (Cravinhos, Brazil)] and 3 types of processing, new (N), reused after autoclave (RA), and reused after chemical disinfection (RC), were used. After inducing luteolysis to avoid endogenous circulating P4, the cows were randomized in 1 of 6 treatments (1.9 g of N, 1.9 g of RA, 1.9 g of RC, 1.0 g of N, 1.0 g of RA, and 1.0 g RC). Cows were treated with the implants for 8 d and during this period blood samples were collected at 0, 2, 12, 24, 48, 72, 96, 120, 144, 168, and 192 h. Statistical analyses were performed using Proc-Mixed and the mean ± standard error of the mean P4 concentrations were calculated using the Proc-Means procedures of SAS 9.4 (SAS Institute Inc., Cary, NC). No interaction between treatments was observed. Comparing types of implant, average P4 concentrations during treatments were greater for 1.9 g than 1.0 g (1.46 vs. 1.14 ± 0.04 ng/mL). When types of processing were compared, average P4 concentrations did not differ between autoclaved and new inserts (1.46 vs. 1.37 ± 0.05 ng/mL; respectively), but both were greater than chemically disinfected implants (1.09 ± 0.04 ng/mL). Within 1.9-g P4 inserts, P4 concentrations from autoclaved implants were greater than new, which were greater than chemically disinfected (1.67 ± 0.06 vs. 1.49 ± 0.07 vs. 1.21 ± 0.05 ng/mL; respectively). For 1.0-g P4 implants, P4 concentrations from autoclaved did not differ

Modelos para determinação dos parâmetros da equação de van Genuchten para um Cambissolo Models for determination of parameters of van Genuchten equation for a Cambisol

Directory of Open Access Journals (Sweden)

Carlos R. de Mello

2005-03-01

Full Text Available Com este trabalho, objetiva-se a geração de modelos matemáticos para predição dos 4 parâmetros da equação de van Genuchten (tetaR, tetaS, alfa e n e para a umidade correspondente à capacidade de campo em função dos atributos areia, argila, matéria orgânica e densidade do solo, ambas de fácil e rotineira determinação em laboratório, além da profundidade. Coletaram-se 36 amostras não deformadas e deformadas nas profundidades de 0 a 30, 30 a 60 e 60 a 90 cm, em Cambissolo originado de gnaisse, determinando-se as umidades correspondentes às tensões de 2, 6 e 10 kPa em mesa de tensão e as referentes a 33, 100, 500 e 1500 kPa, em câmara de Richards. Para ajuste dos modelos, trabalhou-se com o programa SAS for Windows, com a rotina Proc Reg, e procedimento Backward, para selecionar as variáveis significativamente diferentes de zero num certo nível de probabilidade. Para avaliação dos modelos, consideraram-se o coeficiente de determinação e os erros de predição, tanto para os parâmetros estimados quanto para as umidades geradas pela equação de van Genuchten ajustada com os parâmetros estimados, para cada tensão descrita acima. Constatou-se que os erros foram consideravelmente pequenos, justificando a aplicação dos modelos.This work proposes to adjust mathematical models to predict the parameters of van Genuchten equation (thetaR, thetaS, alpha and n, besides a model to predict the soil moisture corresponding to the field capacity. The models express the equation parameters as dependent variables and sand, clay, organic matter, bulk density and depth as independent variables. All independent variables can be easily and routinely determined in laboratory. The samples were collected at 12 points in and three layers (0-30; 30-60; 60-90 cm of a Cambisol, using a Uhland sampler. The soil moisture at matric potentials of 2, 6 and 10 kPa were determined using a porous plate apparatus and those at matric potentials of 33

Niveles y efectos de la consanguinidad en variables de comportamiento durante la tienta y la lidia en dos ganaderías de reses bravas de Colombia Levels and effects of inbreeding on performance traits during tempt and fight from two fighting bull farms in Colombia

Directory of Open Access Journals (Sweden)

David Calero Quintero

2010-04-01

Full Text Available En el estudio se estimaron los niveles y las tendencias de la consanguinidad en variables de comportamiento durante la tienta y la lidia en dos ganaderías colombianas de reses bravas: Ernesto González Caicedo (EGC - Popayán, Cauca, encaste Santacoloma; y Guachicono (GUA - Bolívar, Cauca, Colombia, encaste Parladé. Se analizaron los pedigríes de 2.094 animales EGC nacidos entre 1918 y 2007 y 963 GUA, nacidos entre 1928 y 2005. Los coeficientes de consanguinidad de los bovinos se obtuvieron usando el Proc Inbreed del programa SAS v. 9.1.3. Se estudiaron además de las notas del ganadero, las variables propias y comunes a las faenas de tienta y de lidia. Los promedios y las desviaciones estándar de la consanguinidad en EGC y GUA fueron 4.9±6.6 y 4.2±4.2% para todos los animales, 4.5±5.8 y 6.0±3.4% para la última época estudiada, y 10.6±5.8 y 6.5±3.5% considerando sólo los consanguíneos. Se encontraron efectos positivos en las variables responsables de ‘toreabilidad’ y estilo, y depresivos en la fuerza de los animales. La consanguinidad actual en ambas ganaderías es mediana, sin embargo debe diseñarse un plan de apareamiento.This study was carried out to estimate levels and trends of the inbreeding on behavior variables during the tempt and fight from two fighting farms: Ernesto González Caicedo (EGC and Guachicono (GUA with strains Santacoloma, and Parladé respectively, located on Popayán and Bolívar, municipalities of the Cauca Department, Colombia. The pedigrees of 2094 EGC animals born between 1918 and 2007, and 963 GUA animals born between 1928 and 2005 were analyzed. Inbreeding coefficients of the cattle were obtained using PROC INBREED from the software SAS v. 9.1.3. In addition to the breeder’s notes the own variables, dealing and common to the tempt and fight task were studied. The average and standard deviations of the blood relationship during the total and the last time studied for the cattle raising EGC and

Compositions de revêtement réticulables par bombardement électronique. Première Partie : Caractéristiques générales du procédé Forming Crosslinkable Coatings by Electron Bombardement. Part One : General Features of the Process

Directory of Open Access Journals (Sweden)

Miléo J. -C.

2006-11-01

Full Text Available L'utilisation des accélérateurs d'électrons de moyenne énergie pour le durcissement et l'insolubilisation des peintures et vernis est décrite en analysant plus particulièrement l'aspect physico-chimique du procédé. On examine spécialement - l'action du rayonnement sur la matière; - les aspects généraux de la polymérisation radiochimique ; - l'application de la polymérisation sous radiation au séchage des vernis. On aborde ensuite rapidement les problèmes liés au choix du rayonnement et à l'influence de l'oxygène de l'air. Cet exposé se termine par la description d'un accélérateur d'électrons et d'une méthode calométrique de dosimétrie. The use of medium-power electron accelerators ta cure points and varnishes and to make them insoluble is described by making a special analysis of the physico-che-mical aspect of the process. The following points in particular are examined - the effect of radiation on matter; - general aspects of radiochemical polymerization ; - the application of radiation polymerization ta varnish drying. A quick review is then made of problems linked to the choice of radiation and to the influence of the oxygen in air. The article ends with a description of an electron accelerator and a calorimetric dosimetering method.

Desglossant la transformació epistemològica: una exploració en narratives constitutives de dissidència social

Directory of Open Access Journals (Sweden)

Albert Martín-i-Gómez

2013-07-01

Full Text Available En aquest article explorem el procés de transformació viscut per les persones dissidents a l’ordre social establert. Mitjançant aquesta recerca, pretenem visibilitzar quin tipus de relacions, interaccions i situacions han possibilitat o afavorit aquest canvi, i quines emocions i sensacions han envoltat aquest procés de canvi. La transformació epistemològica, d’aquell sentit que orienta i dota de coherència a la pròpia subjecció és el procés objecte d’estudi, i per a comprendre com es dóna aquest, emprem les produccions narratives biogràfiques com a estratègia metodològica. Localitzem les participants de les narratives en persones que practiquen quotidianament la dissidència, a les que s’accedeix per àmbits fragmentaris de dissidència a les relacions socials (econòmica, de parentiu, política i simbòlica. De les narratives extraiem tres elements significatius compartits que permeten versar entorn al procés de transformació: (1 la pertorbació en la transgressió de la censura, (2 la vivència d’incomoditats i paral·lelismes en el procés, i (3 el grup dissident com a comoditat i nova possibilitació.

Use of SAS in the IDB

International Nuclear Information System (INIS)

Morrison, G.W.; Notz, K.J.; Mastal, E.F.; Trice, V.G.

1984-01-01

The Integrated Data Base (IDB) Program provides official US Department of Energy (DOE) data on spent fuel and radioactive waste inventories, projections, and characteristics. This information is provided through the cooperative efforts of the IDB Program and DOE lead offices, lead sites, major programs, and generator sites. The program is entering its fifth yeaar, and major accomplishments are summarized in three broad areas: (1) the annual inventory report, including ORIGEN2 applications and a Quality Assurance (QA) plan; (2) the summary data file and direct user access; and (3) data processing methodology and support to other programs. Plans for future work in these areas are outlined briefly, including increased utilization of personal computers. Some examples of spent fuel data are given in terms of projected quantities for two growth scenarios, burnup and age profile of the existing inventory, and the approximate specific thermal power relative to high-level waste (HLW) from various sources. 2 references, 3 figures

SAS-Based Studies of Protein Fibrillation

DEFF Research Database (Denmark)

Marasini, Carlotta; Vestergaard, Bente

2017-01-01

Protein fibrillation is associated with a number of fatal amyloid diseases (e.g. Alzheimer's and Parkinson's diseases). From a structural point of view, the aggregation process starts from an ensemble of native states that convert into transiently formed oligomers, higher order assemblies and pro...... and highlight existing reports, exemplifying the wealth of information that can be derived from the method....

Extraction of MOS VLSI (Very-Large-Scale-Integrated) Circuit Models Including Critical Interconnect Parasitics.

Science.gov (United States)

1987-09-01

level descrip- tion without human intervention. Although design rules and the layout function may not be checked, performance verification is still a...digital syvstems.- Proc. I1E1., vol. 69. no. 10. pp. 1200-1211. October 198 1. [2] A. Gupta, AT A circuit extractor." Proc. 20th Design Automiation

Plan de negocios para la constitución de una empresa consultora que preste los servicios de asesoría para la planeación estratégica de organizaciones y la gerencia de proyectos implementando la metodología PMI - JYJ Project Offices S.A.S.

OpenAIRE

Contreras Delgadillo, Yair Esteban; Noriega Silva, Juan Carlos; Benítez Granados, John

2012-01-01

El presente documento describe el plan de negocio para la creación de una empresa de consultoría que asesore, forme las capacidades humanas y acompañe a medianas y grandes empresas de los sectores de Hidrocarburos (Petróleo), Construcción, Obras civiles y Telecomunicaciones, en la gestión de proyectos, creación de Oficinas de Proyectos con enfoque PMI y planeación estratégica. Esta empresa cuya razón social será JYJ Project Offices S.A.S., ofrecerá sus servicios a empresas localizadas en la ...

Genotypes and haplotypes in the insulin-like growth factors, their receptors and binding proteins in relation to plasma metabolic levels and mammographic density

Directory of Open Access Journals (Sweden)

Chanock Stephen J

2010-03-01

Full Text Available Abstract Background Increased mammographic density is one of the strongest independent risk factors for breast cancer. It is believed that one third of breast cancers are derived from breasts with more than 50% density. Mammographic density is affected by age, BMI, parity, and genetic predisposition. It is also greatly influenced by hormonal and growth factor changes in a woman's life cycle, spanning from puberty through adult to menopause. Genetic variations in genes coding for hormones and growth factors involved in development of the breast are therefore of great interest. The associations between genetic polymorphisms in genes from the IGF pathway on mammographic density and circulating levels of IGF1, its binding protein IGFBP3, and their ratio in postmenopausal women are reported here. Methods Samples from 964 postmenopausal Norwegian women aged 55-71 years were collected as a part of the Tromsø Mammography and Breast Cancer Study. All samples were genotyped for 25 SNPs in IGF1, IGF2, IGF1R, IGF2R, IGFALS and IGFBP3 using Taqman (ABI. The main statistical analyses were conducted with the PROC HAPLOTYPE procedure within SAS/GENETICS™ (SAS 9.1.3. Results The haplotype analysis revealed six haploblocks within the studied genes. Of those, four had significant associations with circulating levels of IGF1 or IGFBP3 and/or mammographic density. One haplotype variant in the IGF1 gene was found to be associated with mammographic density. Within the IGF2 gene one haplotype variant was associated with levels of both IGF1 and IGFBP3. Two haplotype variants in the IGF2R were associated with the level of IGF1. Both variants of the IGFBP3 haplotype were associated with the IGFBP3 level and indicate regulation in cis. Conclusion Polymorphisms within the IGF1 gene and related genes were associated with plasma levels of IGF1, IGFBP3 and mammographic density in this study of postmenopausal women.

Measuring and Modeling Behavioral Decision Dynamics in Collective Evacuation

Science.gov (United States)

2014-02-10

1303.4629. 15. Leskovec J, Backstrom L, Kleinberg J (2009) Meme -tracking and the dynamics of the news cycle. Proc 15th ACM SIGKDD : 497505. 16. Leskovec J...2011) Memes online: Extracted, subtracted, injected, and recollected. Proc 5th Int AAAI Conf on Weblogs and Social Media : 353–360. 21. Watts DJ (2002) A

Evolution of Seismic Velocities in Heavy Oil Sand Reservoirs during Thermal Recovery Process Évolution des vitesses sismiques dans les réservoirs de sables bitumineux au cours des procédés de récupération thermique

Directory of Open Access Journals (Sweden)

Nauroy J.-F.

2013-01-01

Full Text Available In thermally enhanced recovery processes like Cyclic Steam Stimulation (CSS or Steam Assisted Gravity Drainage (SAGD, continuous steam injection entails changes in pore fluid, pore pressure and temperature in the rock reservoir, that are most often unconsolidated or weakly consolidated sandstones. This in turn increases or decreases the effective stresses and changes the elastic properties of the rocks. Thermally enhanced recovery processes give rise to complex couplings. 4D seismic surveys are currently conducted to delineate the steam-affected areas but the interpretation is difficult. However, it is essential for optimization of reservoir development. Numerical simulations have been carried out on a case study so as to provide an estimation of the evolution of pressure, temperature, pore fluid saturation, stress and strain in any zone located around the injector and producer wells. The approach of Ciz and Shapiro (2007 (Geophysics 72, A75-A79 has been used to model the velocity dispersion in the oil sand mass under different conditions of temperature and stress. A good agreement has been found between these predictions and some laboratory velocity measurements carried out on samples of Canadian oil sand. Results appear to be useful to better interpret 4D seismic data in order to locate the steam chamber. Dans les procédés de récupération des huiles lourdes par méthodes thermiques, comme ia stimulation cyclique par vapeur (CSS ou le drainage par gravité assisté par vapeur (SAGD, l’injection de vapeur en continu entraîne des changements de liquide de pores, de pression interstitielle et de température dans la roche réservoir, qui est constituée le plus souvent de sable non consolidés ou faiblement consolidés- Ces changements à leur tour augmentent ou diminuent les contraintes effectives et modifient les propriétés élastiques des roches. Les procédés de récupération par méthodes thermiques mettent en oeuvre des couplages

Polarization Orientation Dependence of the Far Infrared Spectra of Oriented Single Crystals of 1,3,5-trinitro-S-triazine (RDX) using Terahertz Time-Domain Spectroscopy

Science.gov (United States)

2009-01-01

BE, Hogbin MR, Kemp MC (2007) Proc IEEE 95:1559 14. Laman N, Sree Harsha S, Grischkowsky D, Melinger JS (2008) Opt Express 16:4094 15. Melinger JS... Laman N, Grischkowsky D (2008) Appl Phy Lett 93:011102 16. Tribe WR, Newnham DA, Taday PF, Kemp MC (2004) Proc SPIE 5354:168 17. Watters DG, Falconer DG

BetaWB - A language for modular representation of biological systems

DEFF Research Database (Denmark)

Ihekwaba, Adoha; Larcher, Roberto; Mardare, Radu Iulian

2007-01-01

A. Ihekwaba, R. Larcher, R. Mardare, C. Priami. BetaWB - A language for modular representation of biological systems. In Proc. of International Conference on Systems Biology (ICSB), 2007......A. Ihekwaba, R. Larcher, R. Mardare, C. Priami. BetaWB - A language for modular representation of biological systems. In Proc. of International Conference on Systems Biology (ICSB), 2007...

Untitled

Indian Academy of Sciences (India)

Proc. of ICEM-1992, Budapest, pp 550-553. 23) A R Millner 1994 Multi-hundred horsepower permanent magnet brushless disk motors. Proc. of APEC Conf, pp 351-355 w. (24 C C Chen, KT Chau, J ZJiang, W Xia, M. Zhu, R. Zhang 1996 Novel permanent magnet motor drives for electric vehicles. IEEE Trans. Ind. Electron.

tant sorghum grain as energy source in fattening diets for beef steers

African Journals Online (AJOL)

FORD, J.E., 1977. Availability of methionine and lysine in sorghum grain in relation to the tannin content. Proc. Nutr. Soc. 36, 124A. HALE, W.H. & PROUTY, F.L., 1980.Current status of grain process- ing: Efficiency of processing systems. Proc. 8th Annual Texas Beef. Conj., Amarillo, Texas. HALE, W.H., TAYLOR, B., SABA, ...

Comparison of Two Methods of Ruminal Digestibility Determination (in situ and in vitro of Pomegranate Seed Pulp

Directory of Open Access Journals (Sweden)

Mohammad Hassan Fathi Nasri

2016-08-01

PSP was prepared by drying of wet PSP in oven at 60ºC. The digestibility of each feed was determined by both in situ and in vitro methods using two Holstein fistulated heifers and Daisy incubator, respectively. Animals were fed a total mixed ration containing 1.8 kg/d of alfalfa hay, 1.8 kg/d of concentrate, 0.5 kg/d of corn silage and 1.8 kg/d of wheat straw (DM basis at two meals. The ingredients of concentrate were barley grain (35%, corn grain (18%, soybean meal (10%, canola meal (15%, wheat bran (11.5%, molasses (7%, vitamin-mineral supplement (1%, oyster shell (2% and salt (0.5% (DM basis. Comparison between treatments for each of digestibility methods at 24 and 48 h of incubation was done separately based on completely randomized design using SAS software. Correlation between digestibility determination methods was estimated using Corr proc of SAS and regression coefficient and also regression equation of in situ digestibility method on in vitro digestibility method was determined using Reg proc of SAS. Results and Discussion The results showed that DM digestibility of PSP (both ensiled and dried was estimated higher when measured by in vitro than in situ method at both incubation times. The correlation between two methods of digestibility determination for dried and ensiled PSP after 24h incubation was 0.81 and 0.96, respectively and after 48h incubation was 0.99 and 0.75, respectively. The regression equations of DM in situ digestibility estimation from DM in vitro digestibility data were of high accuracy. Tagliapietra et al. (27 compared the in vitro and in situ DM digestibility of 11 different feeds and found a high correlation coefficient of 0.90 (P

Sequence Classification: 894385 [

Lifescience Database Archive (English)

Full Text Available t of the SAS complex (Sas2p, Sas4p, Sas5p), which acetylates free histones and nucleosomes and regulates tra...nscriptional silencing; stimulates Sas2p HAT activity; Sas5p || http://www.ncbi.nlm.nih.gov/protein/6324787 ...

Regulation of hTERT Expression and Function in Newly Immortalized p53(+) Human Mammary Epithelial Cell Lines

Science.gov (United States)

2007-06-01

human mammary epithelial cell types by human papilloma virus 16 e6 or e7. Proc Nat Acad Sci USA 1995; 92:3687-91. 54. Shay JW, Pereira-Smith OM, Wright...Liu X-L, Chu Q, Gao Q, Band V. Immortalization of distinct human mammary epithelial cell types by human papilloma virus 16 e6 or e7. Proc Nat Acad

Split Malcev algebras

Indian Academy of Sciences (India)

project of the Spanish Ministerio de Educación y Ciencia MTM2007-60333. References. [1] Calderón A J, On split Lie algebras with symmetric root systems, Proc. Indian. Acad. Sci (Math. Sci.) 118(2008) 351–356. [2] Calderón A J, On split Lie triple systems, Proc. Indian. Acad. Sci (Math. Sci.) 119(2009). 165–177.

Proceso de virtualización de un centro de procesamiento de datos (CPD)

OpenAIRE

Castro Santero, Juan

2016-01-01

Este trabajo trata del proceso de virtualización de un centro de procesamiento de datos (CPD), por el que se explica paso a paso este proceso. Aquest treball tracta del procés de virtualització d'un centre de processament de dades (CPD), pel que s'explica pas a pas aquest procés. Bachelor thesis for the Computer Science program.

Fulltext PDF

Indian Academy of Sciences (India)

The relativistic wave equation of the electron ranks anlO- ng the highest achievements of 20th century science. Dirac's two papers on the subject published in 1928 are the following:- P.A.M. Dirac, Proc. Roy. Soc. Al17, 610, 1928. P.A.M. Dirac, Proc. Roy. Soc. Al18, 351, 1928. Dirac himself is supposed to have reuw.rked that ...

Middle school-aged child enjoyment of food tastings predicted interest in nutrition education on osteoporosis prevention.

Science.gov (United States)

Cheng, Feon W; Monnat, Shannon M; Lohse, Barbara

2015-07-01

NEEDs for Bones (NFB), based on the Health Belief Model, is a 4-lesson osteoporosis-prevention curriculum for 11- to 14-year-olds. This study examined the relationship between enjoyment of food tastings and interest in NFB. NFB was administered by teachers as part of standard practice and evaluated after the fourth lesson using a 21-item survey. Significant clustering of students within classrooms required use of random-intercept multilevel ordinal regression models in SAS proc GLIMMIX, with students nested within classrooms. Analyses considered tasting experience, eating attitudes, sex, grade, and cohort. Students (N = 1619; 50% girls) participated from 85 fourth to eighth grade classrooms (47% sixth grade and 31% seventh grade) in 16 Pennsylvania SNAP-Ed eligible schools over 2 academic years. For all foods tasted, students who did not enjoy the food tasting were less interested in the lesson than students who did enjoy the food tasting (all p < .001); refried beans (odds ratio [OR] = 0.30), soy milk (OR = 0.55), cranapple juice (OR = 0.51), sunflower kernels (OR = 0.48), and Swiss cheese (OR = 0.49). The relationship persisted net of covariates. Enjoyment of food tasting activities can predict interest in nutrition education on osteoporosis prevention, supporting resource allocation and inclusion of food tasting activities in school-age nutrition education. © 2015, American School Health Association.

The Trend Odds Model for Ordinal Data‡

Science.gov (United States)

Capuano, Ana W.; Dawson, Jeffrey D.

2013-01-01

Ordinal data appear in a wide variety of scientific fields. These data are often analyzed using ordinal logistic regression models that assume proportional odds. When this assumption is not met, it may be possible to capture the lack of proportionality using a constrained structural relationship between the odds and the cut-points of the ordinal values (Peterson and Harrell, 1990). We consider a trend odds version of this constrained model, where the odds parameter increases or decreases in a monotonic manner across the cut-points. We demonstrate algebraically and graphically how this model is related to latent logistic, normal, and exponential distributions. In particular, we find that scale changes in these potential latent distributions are consistent with the trend odds assumption, with the logistic and exponential distributions having odds that increase in a linear or nearly linear fashion. We show how to fit this model using SAS Proc Nlmixed, and perform simulations under proportional odds and trend odds processes. We find that the added complexity of the trend odds model gives improved power over the proportional odds model when there are moderate to severe departures from proportionality. A hypothetical dataset is used to illustrate the interpretation of the trend odds model, and we apply this model to a Swine Influenza example where the proportional odds assumption appears to be violated. PMID:23225520

The trend odds model for ordinal data.

Science.gov (United States)

Capuano, Ana W; Dawson, Jeffrey D

2013-06-15

Ordinal data appear in a wide variety of scientific fields. These data are often analyzed using ordinal logistic regression models that assume proportional odds. When this assumption is not met, it may be possible to capture the lack of proportionality using a constrained structural relationship between the odds and the cut-points of the ordinal values. We consider a trend odds version of this constrained model, wherein the odds parameter increases or decreases in a monotonic manner across the cut-points. We demonstrate algebraically and graphically how this model is related to latent logistic, normal, and exponential distributions. In particular, we find that scale changes in these potential latent distributions are consistent with the trend odds assumption, with the logistic and exponential distributions having odds that increase in a linear or nearly linear fashion. We show how to fit this model using SAS Proc NLMIXED and perform simulations under proportional odds and trend odds processes. We find that the added complexity of the trend odds model gives improved power over the proportional odds model when there are moderate to severe departures from proportionality. A hypothetical data set is used to illustrate the interpretation of the trend odds model, and we apply this model to a swine influenza example wherein the proportional odds assumption appears to be violated. Copyright © 2012 John Wiley & Sons, Ltd.

Associations of Undergoing a Routine Medical Examination or Not with Prevalence Rates of Hypertension and Diabetes Mellitus: A Cross-Sectional Study.

Science.gov (United States)

Zhang, Lin; Zhang, Wei; Zhang, Lingling; Tian, Danping; Li, Li; Deng, Xin; Deng, Jing; Ning, Peishan; Hu, Guoqing

2016-06-23

Undergoing a routine medical examination may be associated with the prevalence rate of chronic diseases from a population-based household interview survey. However, this important issue has not been examined so far. Data came from the first health service household interview of Hunan province, China, in 2013. A Rao-Scott chi-square test was performed to examine the difference in prevalence rates between subgroups. Adjusted odds ratio (OR) was calculated using the PROC SURVEYLOGISTIC procedure of SAS9.1 statistical software. In total, 24,282 residents of 8400 households were surveyed. A higher proportion of elderly adults had undergone a medical examination within the prior 12 months compared with young adults (≥65 years, 60%; 45-64 years, 46%; 18-44 years, 37%). After controlling for location, sex, and household income per capita, undergoing a medical examination was significantly associated with high prevalence rates of hypertension (adjusted OR: 2.0, 95% CI: 1.1-3.5) and of diabetes mellitus (adjusted OR: 3.3, 95% CI: 1.7-6.5) for young adults aged 18-44 years. The associations were not statistically significant for age groups 45-64 years and 65 years or older. The prevalence rates of hypertension and diabetes mellitus may be seriously underestimated for young adults not undergoing a routine medical examination in a health household interview survey.

Purposeful selection of variables in logistic regression

Directory of Open Access Journals (Sweden)

Williams David Keith

2008-12-01

Full Text Available Abstract Background The main problem in many model-building situations is to choose from a large set of covariates those that should be included in the "best" model. A decision to keep a variable in the model might be based on the clinical or statistical significance. There are several variable selection algorithms in existence. Those methods are mechanical and as such carry some limitations. Hosmer and Lemeshow describe a purposeful selection of covariates within which an analyst makes a variable selection decision at each step of the modeling process. Methods In this paper we introduce an algorithm which automates that process. We conduct a simulation study to compare the performance of this algorithm with three well documented variable selection procedures in SAS PROC LOGISTIC: FORWARD, BACKWARD, and STEPWISE. Results We show that the advantage of this approach is when the analyst is interested in risk factor modeling and not just prediction. In addition to significant covariates, this variable selection procedure has the capability of retaining important confounding variables, resulting potentially in a slightly richer model. Application of the macro is further illustrated with the Hosmer and Lemeshow Worchester Heart Attack Study (WHAS data. Conclusion If an analyst is in need of an algorithm that will help guide the retention of significant covariates as well as confounding ones they should consider this macro as an alternative tool.

Effect of hot carcass weight on loin, ham, and belly quality from pigs sourced from a commercial processing facility,.

Science.gov (United States)

Harsh, B N; Arkfeld, E K; Mohrhauser, D A; King, D A; Wheeler, T L; Dilger, A C; Shackelford, S D; Boler, D D

2017-11-01

The objective was to determine the predictive abilities of HCW for loin, ham, and belly quality of 7,684 pigs with carcass weights ranging from 53.2 to 129.6 kg. Carcass composition, subjective loin quality, and ham face color were targeted on all carcasses, whereas in-plant instrumental loin color and belly quality were assessed on 52.0 and 47.5% of carcasses, respectively. Loin chop slice shear force (SSF), cured ham quality, and adipose iodine value (IV) were evaluated on at least 10% of the population. The slope of regression lines and coefficients of determination between HCW and quality traits were computed using PROC REG of SAS and considered significant at ≤ 0.05. As HCW increased, boneless loins became darker and redder, evidenced by lower L* (β = -0.0243, color score (β = 0.0024, ham face color ( ham face L* values and 0.47% of the variability in a* values. Heavier carcasses produced thicker and firmer bellies, with HCW accounting for 37.81% of the variability in belly thickness (β = 0.0272, ham quality explained by HCW was poor (≤5.60%), suggesting that HCW is a poor predictor of the primal quality of pigs within this weight range. Nonetheless, HCW was a moderate predictor of belly quality traits. The findings of this study suggest that increasing HCW did not compromise loin, ham, or belly quality attributes.

Statistical experimental design for saltstone mixtures

International Nuclear Information System (INIS)

Harris, S.P.; Postles, R.L.

1992-01-01

The authors used a mixture experimental design for determining a window of operability for a process at the U.S. Department of Energy, Savannah River Site, Defense Waste Processing Facility (DWPF). The high-level radioactive waste at the Savannah River Site is stored in large underground carbon steel tanks. The waste consists of a supernate layer and a sludge layer. Cesium-137 will be removed from the supernate by precipitation and filtration. After further processing, the supernate layer will be fixed as a grout for disposal in concrete vaults. The remaining precipitate will be processed at the DWPF with treated waste tank sludge and glass-making chemicals into borosilicate glass. The leach-rate properties of the supernate grout formed from various mixes of solidified coefficients for NO 3 and chromium were used as a measure of leach rate. Various mixes of cement, Ca(OH) 2 , salt, slag, and fly ash were used. These constituents comprise the whole mix. Thus, a mixture experimental design was used. The regression procedure (PROC REG) in SAS was used to produce analysis of variance (ANOVA) statistics. In addition, detailed model diagnostics are readily available for identifying suspicious observations. For convenience, trillinear contour (TLC) plots, a standard graphics tool for examining mixture response surfaces, of the fitted model were produced using ECHIP

The Role of Attrition and Solids Recovery in a Chemical Looping Combustion Process Effet de l’attrition et de la récupération des particules dans le procédé de combustion en boucle chimique

Directory of Open Access Journals (Sweden)

Kramp M.

2011-05-01

Full Text Available In the present work, the steady-state behavior of a Chemical Looping Combustion process of interconnected fluidized bed reactors is simulated. The simulations have been carried out in two different scales, 50 kWth and 100 MWth. Attrition model derived from small scale laboratory experiments has been employed for the prediction of the process behavior in terms of attrition and Oxygen Carrier loss. Information on Oxygen Carrier characteristics and reaction kinetics were taken from literature. Realistic circulation mass flows of Oxygen Carrier particles are obtained and Oxygen Carrier losses are quantified. The large scale process looses significantly more Oxygen Carrier than the small scale process based on the same amount of thermal energy produced. Incomplete conversion in the air reactor could be identified as a critical point. Another issue is the fuel gas bypassing the Oxygen Carrier particles through bubbles in the large scale process which leads to lowered fuel conversions. The simulations indicate that a similar performance of a pilot scale and a large scale process is not guaranteed due to the scale-up effect on fluid dynamics. Furthermore, the simulations allow an assessment of the influence of the quality of the solids recovery system on the Oxygen Carrier loss. The distribution of the losses between possible origins is investigated and different changes in the solids recovery system are discussed regarding their potential to decrease the Oxygen Carrier loss. For example, the addition of a second-stage cyclone after the air reactor of the large scale process reduces the Oxygen Carrier loss significantly. Le présent travail propose un modèle de simulation en continu du procédé de combustion en boucle chimique constitué de deux lits fluidisés interconnectés. Les simulations ont été conduites à deux échelles 50 kWth correspondant à une installation pilote et 100 MWth correspondant à une installation industrielle. Un modèle d

Repository operational criteria analysis

International Nuclear Information System (INIS)

Hageman, J.P.; Chowdhury, A.H.

1992-08-01

The objective of the ''Repository Operational Criteria (ROC) Feasibility Studies'' (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations, considering the interfaces and impacts of any potential changes to those regulations. The study addresses regulatory criteria related to the preclosure aspects of the geologic repository. The study task developed regulatory concepts or potential repository operational criteria (PROC) based on analysis of a repository's safety functions and other regulations for similar facilities. These regulatory concepts or PROC were used as a basis to assess the sufficiency and adequacy of the current criteria in 10 CFR Part 60. Where the regulatory concepts were same as current operational criteria, these criteria were referenced. The operations criteria referenced or the PROC developed are given in this report. Detailed analyses used to develop the regulatory concepts and any necessary PROC for those regulations that may require a minor change are also presented. The results of the ROC task showed a need for further analysis and possible major rule change related to the design bases of a geologic repository operations area, siting, and radiological emergency planning

Quantum field theory on a cone

International Nuclear Information System (INIS)

Dowker, J.S.

1977-01-01

The expressions derived by Sommerfeld (Proc. Lond. Math. Soc.; 28: 417 (1897)) and Carslaw (Proc. Lond. Math. Soc.; 20: 121 (1898), 8: 365 (1910), 18: 291 (1919)) for the Green functions and diffusion kernels in a wedge of arbitrary angle are shown to be useful in discussions of the Feynman Green function in Rindler (Am. J. Phys.; 34: 1174 (1966)) space and other space-time metrics. (author)

Identification and Triage of Compromised Virtual Machines

Science.gov (United States)

2014-09-01

purposes. netstat.exe Displays active TCP connections, ports on which the computer is listening, Ethernet statistics, the IP routing table, IPv4 ...recalls a history of commands entered via the current command prompt session, edits command lines, and creates macros [29] 2. Sysinternals Suite Tools...filesums history of additional users ~username/.bash_history ./ps -ef | ./grep “lkl” file /proc/1900/exe ./strings -a /proc

Method for producing nano-embedded microparticles

DEFF Research Database (Denmark)

2015-01-01

of the invention. (FR)La présente invention concerne un procédé rapide, à haut rendement et continu de production de nano-microparticules intégrées sous forme de poudre, ce qui permet d'obtenir un procédé économique qui peut être mis en oeuvre de manière aseptique. L'invention concerne, en outre, un appareil pour...

Model checking biological systems described using ambient calculus

DEFF Research Database (Denmark)

Mardare, Radu Iulian; Priami, Corrado; Qualia, Paola

2005-01-01

Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005.......Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005....

A Modified T-Test for Football Referees to Test Agility, Quickness and Sprint Performances

Science.gov (United States)

Muniroglu, S.; Subak, E.

2018-01-01

The football referees perform many actions as jogging, running, sprinting, side steps and backward steps during a football match. Further, the football referees change match activities every 5-6 seconds. Many tests are being conducted to determine the physical levels and competences of football referees like 50 m running, 200 m running, 12 minutes…

Applications of Polarimetric and Interferometric SAR to Environmental Remote Sensing and its Activities: Recent Advances in Extrawideband Polarimetry, Interferometry and Polarimetric Interferometry in Synthetic Aperture Remote Sensing and its Applications

Science.gov (United States)

2007-02-01

leap towards complete physical realizability” must and will be achieved during this decade – similar to progressing from “Classical X- Ray -Shadow...Visible, Ultraviolet, X- Ray , Proc. SPIE-1317 ( also see SPIE Proc. 891, 1166, 1746, 1988, 1989, 3121). [38] Chipman, R.A., 1994, Polarimetry...on „Radar mit realer und synthetischer Apertur“. Oldenburg Verlag, Munich 1999, 88 p. [173] Mott, H. and W-M. Boerner, 1992, editors, “Radar

Detection and Interpretation of Low-Level and High-Level Surprising and Important Events in Large-Scale Data Streams

Science.gov (United States)

2016-06-28

a current (start) state to one or several desired (goal) state or states. Note that like in standard search in Artificial Intelligence , the goal may...datasets. Publications: J. Zhao, C. Siagian, L. Itti, Fixation Bank : Learning to Reweight Fixation Candidates, In: Proc. IEEE Confer- ence on Computer...eyeglasses, In: Proc. IEEE/RSJ International Con- ference on Intelligent Robots and Systems (IROS), pp. 5674-5679, Nov 2013. [2013 acceptance rate: 43%] A

Characteristic Risk Factors Associated with Planned versus Impulsive Suicide Attempters.

Science.gov (United States)

Kim, Jaeha; Lee, Kang-Sook; Kim, Dai Jin; Hong, Seung-Chul; Choi, Kyoung Ho; Oh, Youngmin; Wang, Sheng-Min; Lee, Hae-Kook; Kweon, Yong-Sil; Lee, Chung Tai; Lee, Kyoung-Uk

2015-12-31

The present study aimed to investigate predictors for planned suicide attempters. This study included 1,003 patients who attempted suicide and visited emergency department. They were divided into two groups, planned suicide attempters (SAs; n=133 [13.3%]) and impulsive SAs (n=870, [86.7%]), and the demographic variables, clinical characteristics, factors related to suicide, and psychiatric resources of the groups were compared. Major depressive disorder and substance use disorders were more common among planned SAs than among impulsive SAs. Additionally, the planned SAs were older, more likely to be divorced, separated or widowed, and more likely to have comorbid medical illnesses, severe depression, higher suicidality, and self-blaming tendencies than the impulsive SAs. Financial problems and physical illnesses were more common in planned SAs but interpersonal conflicts were more frequent in impulsive SAs. Planned SAs had fewer previous suicide attempts but these were more serious suicide attempts. The presence of the hope to die, a written will, and suicidal ideation of a repetitive, intense, and continuous nature were predictive of planned SAs. The present findings demonstrated that planned SAs had more severe psychopathology and medical illnesses than impulsive SAs. Therefore, screening for depression, substance use disorders, and suicidal plans among old and medically ill patients may be important for preventing suicide attempts.

USING SAS ENTERPRISE GUIDE SOFTWARE IN CLASSIFICATION

OpenAIRE

Ana Maria Mihaela IORDACHE

2011-01-01

Data mining, also known as "discovery knowledge in large databases "is a modern and powerful information technology and communications tool that can be used to extract useful information but still unknown. This automates the process of discovery some relations and mixtures from the raw data and founded results could be incorporated into an automated decision support. This paper aims to present and perform the classification of European Union countries based on the social indicators calculated...

SAS Institute pre-sales internship : internship report

OpenAIRE

António, Bruno Alexandre Zeverino

2017-01-01

The present document describes the work developed during the six months internship at SAS® Institute Inc.. During the internship, the intern provided support to the Pre-Sales department by integrating the analytic team. The intern received access to an extensive selection of courses designed to introduce the core technologies and present the analytical tools developed by SAS®. He was later integrated in a team working in a proof of concept dedicated to showcase the forecast capability of SAS®...

Statistical analysis of medical data using SAS

CERN Document Server

Der, Geoff

2005-01-01

An Introduction to SASDescribing and Summarizing DataBasic InferenceScatterplots Correlation: Simple Regression and SmoothingAnalysis of Variance and CovarianceMultiple RegressionLogistic RegressionThe Generalized Linear ModelGeneralized Additive ModelsNonlinear Regression ModelsThe Analysis of Longitudinal Data IThe Analysis of Longitudinal Data II: Models for Normal Response VariablesThe Analysis of Longitudinal Data III: Non-Normal ResponseSurvival AnalysisAnalysis Multivariate Date: Principal Components and Cluster AnalysisReferences

Plasmas pour valorisation totale ou partielle des gaz contenant de l'H2S Plasmas for Total Or Partial Upgrading of H2s Containing Gases

Directory of Open Access Journals (Sweden)

Czernichowski A.

2006-12-01

Full Text Available Des procédés par plasmas alternatifs au procédé Claus sont proposés pour produire de l'hydrogène et récupérer du soufre à partir des gaz contenant une forte teneur en H2S. Quand la teneur en H2S est moins importante, des techniques plasma peuvent également être utiles pour assister certains étages du procédé classique Claus ou réaliser ce procédé pour des gaz non conventionnels. Les tests allant jusqu'à l'échelle industrielle sont menés dans divers réacteurs à plasmas et les résultats encourageants rapportés de la littérature et de la recherche propre laissent envisager des prochaines applications. Plasma assisted processes are proposed to act as an alternative to the Claus process in order to recover hydrogen and sulphur from high H2S gases. For less concentrated gases plasma techniques may also be inserted into classical Claus plant or may allow treatment of non conventional gases. Up to industrial scale tests are performed using different plasma reactors. The literature-based results as well as our own ones make the future applications quite optimistic.

Accelerated collagen turnover in women with angina pectoris without obstructive coronary artery disease: An iPOWER substudy.

Science.gov (United States)

Nielsen, Signe H; Mygind, Naja D; Michelsen, Marie M; Bechsgaard, Daria F; Suhrs, Hannah E; Genovese, Federica; Nielsen, Henning B; Brix, Susanne; Karsdal, Morten; Prescott, Eva; Kastrup, Jens

2018-05-01

Aim Collagens are major cardiac extracellular matrix components, known to be actively remodelled and accumulated during diffuse myocardial fibrosis. We evaluated whether accelerated collagen turnover described by neo-epitope biomarkers reflecting collagen formation and degradation separates patients with diffuse myocardial fibrosis from asymptomatic controls. Methods and results Seventy-one women with angina pectoris without significant coronary artery disease assessed by invasive coronary angiogram were included. Competitive enzyme-linked immunosorbent assays (ELISAs) measuring circulating protein fragments in serum assessed the formation and degradation of collagen type III (Pro-C3, C3M and C3C), IV (P4NP7S and C4M), V (Pro-C5 and C5M) and VI (Pro-C6 and C6M), and degradation of collagen type I (C1M). Serum samples from 32 age-matched asymptomatic women were included as controls. Symptomatic women presented significantly elevated levels of Pro-C6, C3C, C3M, C4M and C8-C ( p angina pectoris, but without significant obstructive coronary artery disease, showed an imbalanced collagen turnover compared to asymptomatic controls. The examined biomarkers are tools to monitor active collagen remodelling in patients with angina pectoris, in risk of developing myocardial fibrosis.

Antithrombin deficiency and decreased protein C activity in a young man with venous thromboembolism: a case report.

Science.gov (United States)

Wang, Dong; Tian, Min; Cui, Guanglin; Wang, Dao Wen

2018-06-01

Antithrombin and protein C are two crucial members in the anticoagulant system and play important roles in hemostasis. Mutations in SERPINC1 and PROC lead to deficiency or dysfunction of the two proteins, which could result in venous thromboembolism (VTE). Here, we report a Chinese 22-year-old young man who developed recurrent and serious VTE in cerebral veins, visceral veins, and deep veins of the lower extremity. Laboratory tests and direct sequencing of PROC and SERPINC1 were conducted for the patient and his family members. Coagulation tests revealed that the patient presented type I antithrombin deficiency combined with decreased protein C activity resulting from a small insertion mutation c.848_849insGATGT in SERPINC1 and a short deletion variant c.572_574delAGA in PROC. This combination of the two mutations was absent in 400 healthy subjects each from southern and northern China. Then, we summarized all the mutations of the SERPINC1 and PROC gene reported in the Chinese Han population. This study demonstrates that the combination of antithrombin deficiency and decreased protein C activity can result in severe VTE and that the coexistence of different genetic factors may increase the risk of VTE.

78 FR 73009 - Takes of Marine Mammals Incidental to Specified Activities; U.S. Navy Training and Testing...

Science.gov (United States)

2013-12-04

.... Synthetic Aperture Sonars SAS1 MF SAS systems. (SAS): Sonars in which SAS2 HF SAS systems. active acoustic... sails are not dedicated ASW events and involve multiple warfare areas. Non-Impulsive ASW for Composite... Grenades. anti-swimmer grenades to defend against hostile divers (e.g., Visit, Board, Search, and Seizure...

A High Performance Frequency Standard and Distribution System for Cassini Ka-Band Experiment

Science.gov (United States)

2005-08-01

Orthogonal Polarization In Anisotropic Dielectric Resonators”, Proceedings of the 2002 IEEE International Frequency Control Symposium , pp. 553-558...2002. [9] G. J. Dick, Rabi T. Wang, Robert Tjoelker, “Design and Progress Report for Compact Cryocooled Sapphire Oscillator "VCSO"”, Proc. 2005 Joint...IEEE FCS/ PTTI. [10] R. Basu, G. J. Dick, Rabi T. Wang,” Novel Design of an All- Cryogenic RF Pound Circuit “,Proc. 2005 Joint IEEE FCS/ PTTI

Numerical Simulation of Atmospheric Boundary Layer Flow Over Battlefield-scale Complex Terrain: Surface Fluxes From Resolved and Subgrid Scales

Science.gov (United States)

2015-07-06

Geophysical Union, Fall Meeting, San Francisco, CA Li Q, Bou-Zeid E, Anderson W, Grimmond S, 2014: Proc. of American Physical Society, Division of Fluid...the existence of hairpin packets (and “ cane ” structures: inclined coherent par- cel with only one leg of the hairpin[41] around the low momentum...Department. Conference Proceedings : • Anderson W, Li Q, Bou-Zeid E, 2014: Proc. of American Geophysical Union, Fall Meeting, San Francisco, CA. • Anderson

Roles of Knowledge in Motor Learning.

Science.gov (United States)

1987-02-02

arm dynamics, previous single trajectory learning algorithms, and much of traditional adaptive control. Thesis Supervisor: Dr. Emilio Bizzi Eugene...and Lim, S.K., 1984, *Joint torque measurement of a direct-drive arm,’ Proc. 23rd Con!. Decision ad Control, Las Vegas , Dec. 12-14, pp. 1332-1337...Dynamic Systems By Learning: A New Control Theory For Servomechanisms of Mechatronics Systems." Proc. 23rd IEEE CDC, Las Vegas , Nevada Arimoto, S., S

Recent Advances In Radar Polarimetry And Polarimetric SAR Interferometry

Science.gov (United States)

2007-02-01

progressing from “Classical X- Ray -Shadow-graphy” toward “functional Magnetic Resonant Imaging (fMRI)”. Classical Amplitude-Only Radar & SAR, and “Scalar...Chipman, R. A, and J. W. Morris, eds. 1990, Polarimetry: Radar, Infrared, Visible, Ultraviolet, X- Ray , Proc. SPIE-1317 ( also see SPIE Proc. 891... Oldenburg Verlag, Munich 1999, 88 p. [173] Mott, H. and W-M. Boerner, 1992, editors, “Radar Polarimetry, SPIE’s Annual Mtg., Polarimetry Conference

Scattering of Acoustic Waves from Ocean Boundaries

Science.gov (United States)

2015-09-30

at the Target and Reverberation Experiment 2013 (TREX13),” in Proc. IEEE/OES Acoustics in Underwater Geosciences Symposium, Rio de Janeiro , Brazil...a Sandy Seabed at the Target and Reverberation Experiment 2013 (TREX13),” in Proc. IEEE/OES Acoustics in Underwater Geosciences Symposium, Rio de ... Janeiro , Brazil, July 2015. PRESENTATIONS Presenter: Isakson, M.J., Chotiros, N.P., Piper, J.N. and McNeese, A. “Acoustic Scattering from a Sandy Seabed

A State-of-the-Art Assessment of Automatic Name Placement.

Science.gov (United States)

1986-08-01

processing and the annotation problem," Proc. 3rd Scandinavian Conference on Image Analyms, Chartwell-Bratt Ltd., Copenhagen, Denmark, July 1983. This paper...develop an automatic name placement system. 11 Balodis, M., "Positioning of typography on maps," Proc. ACSM Pall Con- vention, Salt Lake City, Utah, Sept...1983, pp. 28-44. This article deals with the selection of typography for maps. It describes psycho-visual experiments with groups of individuals to

Biomass Conversion to Hydrocarbon Fuels Using the MixAlcoTM Process Conversion de la biomasse en combustibles hydrocarbonés au moyen du procédé MixAlcoTM

Directory of Open Access Journals (Sweden)

Taco-Vasquez S.

2013-04-01

Full Text Available The MixAlcoTM process converts biomass to hydrocarbons (e.g., gasoline using the following generic steps: pretreatment, fermentation, descumming, dewatering, thermal ketonization, distillation, hydrogenation, oligomerization and saturation. This study describes the production of bio-gasoline from chicken manure and shredded office paper, both desirable feedstocks that do not require pretreatment. Using a mixed culture of microorganisms derived from marine soil, the biomass was fermented to produce a dilute aqueous solution of carboxylate salts, which were subsequently descummed and dried. The dry salts were thermally converted to raw ketones, which were distilled to remove impurities. Using Raney nickel catalyst, the distilled ketones were hydrogenated to mixed secondary alcohols ranging from C3 to C12. Using zeolite HZSM-5 catalyst, these alcohols were oligomerized to hydrocarbons in a plug -flow reactor. Finally, these unsaturated hydrocarbons were hydrogenated to produce a mixture of hydrocarbons that can be blended into commercial gasoline. Le procédé MixAlcoTM convertit la biomasse en hydrocarbures (par exemple, en essence selon les étapes génériques suivantes : prétraitement, fermentation, écumage, déshydratation, cétonisation thermique, distillation, hydrogénation, oligomérisation et saturation. Cette étude décrit la production de bioessence à partir de fumier de poulet et de papier en lambeaux, ces deux sources étant des matières premières convoitées ne nécessitant pas de prétraitement. À l’aide d’une culture mixte de microorganismes dérivés de sols marins, la biomasse a été soumise à une fermentation de manière à produire une solution aqueuse diluée de sels de carboxylates, ultérieurement écumés et séchés. Les sels séchés ont été thermiquement convertis en cétones brutes, ensuite distillées afin d’éliminer les impuretés. À l’aide du catalyseur à base de nickel de Raney, les c

Le groupe de travail EPNAC

Directory of Open Access Journals (Sweden)

MOLLE, Pascal

2012-12-01

Full Text Available En France, les procédés de traitement des eaux usées des petites et moyennes collectivités sont en constante évolution et leur diversité augmente fortement. Constitué à l'initiative d'Irstea, le groupe de travail EPNAC a pour objectif de mutualiser et de diffuser une information technique et cohérente sur ces procédés auprès des acteurs de l'assainissement.

Study of HV Dielectrics for High Frequency Operation in Linear and Nonlinear Transmission Lines (NLTLs) and Simulation and Development of Hybrid Nonlinear Lines for RF Generation

Science.gov (United States)

2016-01-27

Microwave & Optolectronics Conf. (IMOC), Rio de Janeiro , RJ, 2013, pp. 1-5. 7) L.P. Silva Neto, J.O. Rossi, J.J. Barroso, A.R. Silva. “Characterization of...Proc. of the SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference, Rio de Janeiro , Brazil, Aug. 2013, pp. 1-5. 11) L.P. Silva Neto...transmission lines,” Proc. of the SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference, Rio de Janeiro , Brazil, Aug. 2013, pp. 1-5

Tip-over Prevention: Adaptive Control Development

Science.gov (United States)

2015-05-30

Tip-over Prevention: Adaptive Control Development Leah Kelley Massachusetts Institute of Technology Cambridge, MA 02139 Email: lckelley@mit.edu Kurt...Papadopoulos and D. Rey, Proc. IEEE ICRA, vol.4, 1996, pp. 3111. [7] S. Ali, A. Moosavian, and K. Alipour, Robotics, Automation and Mechatronics , 2006 IEEE Conf...on, 2006, pp. 1–6. [8] K. Talke, L. Kelley, P. Longhini, and G. Catron, Proc. SPIE 9084, Unmanned Systems Technology XVI, June 2014, pp. 90 840L–11

Towards an Operational Urban Modeling System for CBRN Emergency Response and Preparedness

Science.gov (United States)

2014-05-01

urban sites, Proc, 7th International Conference of Urban Climate, 29 June- 3 July, Yokohama, Japon , A12-3 . Bélair, S., M. Abrahamowicz, S. Leroyer...conditions for the Montreal Urban Snow Experiment (MUSE) 2005, Proc, 7th International Conference of Urban Climate, 29 June- 3 July, Yokohama, Japon , A12-6...International Conference of Urban Climate, 29 June- 3 July, Yokohama, Japon , A12-5 . Leroyer, S., J. Mailhot, S. Bélair, A. Lemonsu and I. B. Strachan

Specialty and Associate Specialist doctors: still the dependable backbone of genitourinary medicine.

Science.gov (United States)

Lee, J D; Carlin, E M; Robinson, A

2013-05-01

Workforce planning is an inexact science. Specialty and Associate Specialist (SAS) doctors are rarely included in workforce analyses. Past studies have shown that SAS doctors are significant contributors to the work in genitourinary (GU) medicine clinics. This survey confirms the large amount of clinical work undertaken by SAS doctors. It appears that 51% of SAS doctors in GU plan to retire in the next 15 years and it is uncertain what effect the 2008 SAS contract will have on SAS recruitment. This information should be taken into consideration in future GUM workforce planning.

Effect of a tea tree oil and organic acid footbath solution on digital dermatitis in dairy cows.

Science.gov (United States)

Smith, A C; Wood, C L; McQuerry, K J; Bewley, J M

2014-01-01

Copper sulfate is the industry gold standard footbath ingredient for controlling dairy cow digital dermatitis. However, when used footbath solutions are deposited on soil, high levels of copper in the soil may result, which can have toxic and negative effects on plant growth. An alternative to copper sulfate is Provita Hoofsure Endurance (Provita Eurotech Ltd., Omagh, UK), which is a biodegradable solution containing organic acids, tea tree oil, and wetting agents. The objective of this study was to quantify changes in digital dermatitis frequency when using Provita Hoofsure Endurance and copper sulfate in a split footbath in 3 commercial dairy herds. This study was conducted from January 5, 2012, to March 19, 2012, in 3 commercial Kentucky dairies with 120, 170, and 200 milking Holstein cows. None of the herds was using a footbath for digital dermatitis control before the study. Footbath solutions were delivered using a split footbath. During the study, a 3% Hoofsure Endurance solution for the left hooves and a 5% copper sulfate solution for the right hooves was used. Digital dermatitis was scored every 3wk using the M0 to M4 system, where M0=a claw free of signs of digital dermatitis; M1=a lesion 2cm, and painful to the touch; M3=the healing stage and covered by a scab; and M4=the chronic stage and characterized by dyskeratosis or proliferation of the surface that is generally not painful. McNemar's test statistic suggested that a statistically significant difference existed in the proportions of M1 and M2 lesions between the beginning and end of the study for both treatments. This indicates that each solution was effective in decreasing the proportion of M1 or M2 lesions from baseline to the last time point. A chi-square test calculated using PROC FREQUENCY of SAS (SAS Institute Inc., Cary, NC) indicated that no statistically significant relationship existed between the treatments among changes in digital dermatitis frequency from the baseline to the end of the

Effects of polymorphic variations in tumor necrosis factor alpha and occupational exposure to grain dust on longitudinal decline in pulmonary function.

Science.gov (United States)

Pahwa, Punam; Nakagawa, Kazuko; Koehncke, Niels; McDuffie, Helen H

2009-01-01

Longitudinal declines in pulmonary function are associated with individuals experiencing occupational exposure to organic dusts in combination with lifestyle factors such as cigarette smoking and with genetic factors, and interactions between these factors. To investigate the relationship between polymorphism of genes encoding Tumor Necrosis Factor Alpha (TNF-alpha) and longitudinal lung function decline in grain workers exposed to grain dust. Male grain handlers who participated in the Saskatchewan Grain Workers Surveillance Program from 2002 through 2005 provided demographic, occupational, lifestyle, and respiratory symptoms information as well as pulmonary function measurements and DNA for genotyping. Marginal models using the generalized estimating equations approach were fitted by using a SAS PROC GENMOD to predict the annual decline in Forced Expired Volume in one second (FEV(1)) and Forced Vital Capacity (FVC). Smoking intensity contributed to the decline in FEV(1.)Among *1/*1 homozygotes and *1/*2 heterozygotes, grain workers with grain industry had significantly lower FEV(1)declines compared to those of the other two exposure groups (>10 and 20 years in the grain industry). The annual declines in FEV(1)for grain workers who were either *1/*1 homozygote or *1/*2 heterozygote and had been in the grain industry for grain workers who were *2/*2 genotype and had been in the industry for grain industry is an effect modifier between TNF-alpha 308 genotype and longitudinal decline in FEV(1)in male subjects exposed to grain dust.

Effect of climate on the seminal characteristics of boars in a region of humid tropical forest

International Nuclear Information System (INIS)

Henao Restrepo, Guillermo; Trujillo Aramburo, Luis Emilio; Buritica Henao, Maria Elizabet; Sierra Perez, Carlos Ignacio; Correa Londono, Guillermo; Gonzalez Boto, Oscar Domingo

2004-01-01

In a region of humid tropical forest, ten boars of from 12 to 24 months of age were selected to evaluate the effect of climatic variables measured on the day of semen collection and for each of preceding 45 days. On seminal characteristics, the variability of each characteristic was separated into an intra individual component and an interindividual component, using maximum likelihood estimators (PROC VARCOMP of SAS). In order to relate the seminal characteristics with the climatic variables, morphological abnormalities were grouped according to the affected spermatic region, into head. Midsection and main section abnormalities; the other characteristics were evaluated without any modification. Possible correlations between seminal characteristics and climatic variables were evaluated. In a total of 298 ejaculates collected weekly during a period of 30 weeks, except for total volume and morphological abnormalities. The seminal characteristics presented low or moderate intra and interindividual variation and were similar to those found in other latitudes, with a tendency to present greater seminal volumes and concentrations maximum temperature minimum temperature. Range among temperatures. Relative humidity and precipitation of the day of the semen collection and on each of the preceding 45 days had low effects on the seminal characteristics. It is possible that the boars in warm humid tropical areas develop a high level of adaptation that permits an adequate testicular thermoregulation that favors the spermatogenic function of the seminiferous tubules in a way that does not perceptibly affect production the seminal quality

Effect on of in vitro fermentation of mixture of Tithonia diversifolia, Cenchrus clandestinum and polyunsaturated fats

Directory of Open Access Journals (Sweden)

Juan Leonardo Cardona Iglesias

2017-04-01

Full Text Available The aim of this study was evaluated by in vitro, the effect of mixing wild sunflower (Tithonia diversifolia, kikuyu (Cenchrus clandestinum and concentrated feed, with the addition of polyunsaturated fatty acids (AGPI on the production of methane (CH4 ml/g MSd, dry matter digestibility (%DIVMS and production of volatile fatty acids (AGV. The research was conducted in NUTRILAB laboratory (Medellin, Colombia in September 2015. Three combinations of AGPI rich lipid sources were used with a total maximum inclusion level corresponding to 3% of incubated dry matter. Combinations of lipid sources were: SAGPI1: 0.5% soya oil, 0.5% sish oil, 2% rich in omega 3 bypass fat. SAGPI2: 1% Soya oil, 0.5% fish oil, 1.5% bypass fat rich in omega 3. SAGPI3: 2.5% Soya oil, 0.5% fish oil. A source of bypass fat (GSP was also used. The results were processed using pre-planned test comparisons through the PROC MIXED-SAS.The methane production in vitro decreased (p<0.05, while the dry matter digestibility increased (p<0.05 24 and 48 hours after wild sunflower was include and / or AGPI or both into the mixtures. In the molar ratio of AGV (%, acetic acid showed an increased presence. The inclusion of forage like wild sunflower and sources of AGPI supplementation in cattle, could be a strategy to reduce methane emissions without causing a detriment to the ruminal fermentation.

Fatores ambientais sobre escores de avaliação visual à desmama em bezerros angus criados no Rio Grande do Sul

Directory of Open Access Journals (Sweden)

Cardoso Fernando Flores

2001-01-01

Full Text Available Os objetivos deste estudo foram determinar a importância dos efeitos de idade da vaca (IV, sexo (S e idade do bezerro (ID, mês de nascimento (M e a interação entre idade da vaca e sexo (IV*S sobre escores de avaliação visual (EV para conformação (CD, precocidade (GD, musculatura (MD e tamanho (TD à desmama, de bovinos Angus, e estimar fatores de correção para esses efeitos. Foram utilizados 11.863 registros coletados pelo Programa de Melhoramento de Bovinos de Carne - PROMEBO, durante os anos de 1989 a 1997. Os dados foram analisados por meio do PROC MIXED do SAS. O modelo incluiu os efeitos de grupo de contemporâneos, M, IV, S, ID (linear e quadrático, IV*S e o efeito aleatório do touro. A partir das médias ajustadas de CD, GD, MD e TD, foram estimadas equações de regressão para M e IV*S. Os EV apresentaram resposta aos efeitos de IV, S e ID similar à do ganho de peso na fase de desmama. A idade do bezerro foi o fator responsável pelas maiores variações não-genéticas nos EV. Fatores de correção para ajuste de IV, ID e data juliana do nascimento foram propostos.